How reverse shoulder arthroplasty works.

PubMed

Walker, Matthew; Brooks, Jordan; Willis, Matthew; Frankle, Mark

2011-09-01

The reverse total shoulder arthroplasty was introduced to treat the rotator cuff-deficient shoulder. Since its introduction, an improved understanding of the biomechanics of rotator cuff deficiency and reverse shoulder arthroplasty has facilitated the development of modern reverse arthroplasty designs. We review (1) the basic biomechanical challenges associated with the rotator cuff-deficient shoulder; (2) the biomechanical rationale for newer reverse shoulder arthroplasty designs; (3) the current scientific evidence related to the function and performance of reverse shoulder arthroplasty; and (4) specific technical aspects of reverse shoulder arthroplasty. A PubMed search of the English language literature was conducted using the key words reverse shoulder arthroplasty, rotator cuff arthropathy, and biomechanics of reverse shoulder arthroplasty. Articles were excluded if the content fell outside of the biomechanics of these topics, leaving the 66 articles included in this review. Various implant design factors as well as various surgical implantation techniques affect stability of reverse shoulder arthroplasty and patient function. To understand the implications of individual design factors, one must understand the function of the normal and the cuff-deficient shoulder and coalesce this understanding with the pathology presented by each patient to choose the proper surgical technique for reconstruction. Several basic science and clinical studies improve our understanding of various design factors in reverse shoulder arthroplasty. However, much work remains to further elucidate the performance of newer designs and to evaluate patient outcomes using validated instruments such as the American Society for Elbow Surgery, simple shoulder test, and the Constant-Murley scores.

Prevalence of neurologic lesions after total shoulder arthroplasty.

PubMed

Lädermann, A; Lübbeke, A; Mélis, B; Stern, R; Christofilopoulos, P; Bacle, G; Walch, G

2011-07-20

Clinically evident neurologic injury of the involved limb after total shoulder arthroplasty is not uncommon, but the subclinical prevalence is unknown. The purposes of this prospective study were to determine the subclinical prevalence of neurologic lesions after reverse shoulder arthroplasty and anatomic shoulder arthroplasty, and to evaluate the correlation of neurologic injury to postoperative lengthening of the arm. All patients undergoing either a reverse or an anatomic shoulder arthroplasty were included during the period studied. This study focused on the clinical, radiographic, and preoperative and postoperative electromyographic evaluation, with measurement of arm lengthening in patients who had reverse shoulder arthroplasty according to a previously validated protocol. Between November 2007 and February 2009, forty-one patients (forty-two shoulders) underwent reverse shoulder arthroplasty (nineteen shoulders) or anatomic primary shoulder arthroplasty (twenty-three shoulders). The two groups were similar with respect to sex distribution, preoperative neurologic lesions, and Constant score. Electromyography performed at a mean of 3.6 weeks postoperatively in the reverse shoulder arthroplasty group showed subclinical electromyographic changes in nine shoulders, involving mainly the axillary nerve; eight resolved in less than six months. In the anatomic shoulder arthroplasty group, a brachial plexus lesion was evident in one shoulder. The prevalence of acute postoperative nerve injury was significantly more frequent in the reverse shoulder arthroplasty group (p = 0.002), with a 10.9 times higher risk (95% confidence interval, 1.5 to 78.5). Mean lengthening (and standard deviation) of the arm after reverse shoulder arthroplasty was 2.7 ± 1.8 cm (range, 0 to 5.9 cm) compared with the normal, contralateral side. The occurrence of peripheral neurologic lesions following reverse shoulder arthroplasty is relatively common, but usually transient. Arm lengthening with a reverse shoulder arthroplasty may be responsible for these nerve injuries.

Return to Sport After Shoulder Arthroplasty in Recreational Athletes: A Systematic Review and Meta-analysis.

PubMed

Aim, Florence; Werthel, Jean-David; Deranlot, Julien; Vigan, Marie; Nourissat, Geoffroy

2018-04-01

One of the most frequent demands from patients after shoulder replacement surgery is to return to sport. To determine the rate of return to sport after shoulder arthroplasty (total shoulder arthroplasty, reverse shoulder arthroplasty, hemiarthroplasty) in recreational athletes. Meta-analysis and systematic review. The PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines were followed to perform this systematic review and meta-analysis of the results in the literature as well as the presentation of results. A search of the literature was performed in the electronic databases MEDLINE, Scopus, Embase, and the Cochrane Library. The quality of the included studies was evaluated according to the MINORS (Methodological Index for Nonrandomized Studies) score. Inclusion criteria were studies in English evaluating return to sport after shoulder replacement surgery and on patients practicing a sport regularly, whatever the level, with all ages and sports included. The main criterion was the rate of patients who returned to a sport activity. Nine studies were selected among the 35 identified, including a total of 613 patients (39% male and 61% female) with a mean age of 71.7 years (range, 22.6-92.6 years). All the included patients practiced sports before surgery. The most common reported sports were golf (n = 140), swimming (n = 128), and tennis (n = 54). The mean rate of return to sport was 80.7% (range, 57.1%-97.3%). All patients who returned to sport were practicing in the 3 months before surgery. No radiological data were reported in the literature. The subgroup analysis for resuming golf after shoulder arthroplasty revealed a rate of return to sport of 79.2% (95% CI, 62.9%-89.5%). In the swimming subgroup, the rate was 75.6% (95% CI, 61.3%-85.8%) and in the tennis subgroup was 63.5% (95% CI, 34.1%-85.5%). The subgroup analysis for reverse shoulder arthroplasty reported a lower rate of return to sport than for all types of shoulder arthroplasty combined: 76.5% (95% CI, 60%-87%) versus 80.7% (95% CI, 70.9%-87.8%), respectively. Most patients returned to sport after surgery, and all who returned to sport were practicing their sport in the 3 months before surgery. No radiological data were reported in the literature.

Isokinetic strength differences between patients with primary reverse and total shoulder prostheses: muscle strength quantified with a dynamometer.

PubMed

Alta, Tjarco D W; Veeger, DirkJan H E J; de Toledo, Joelly M; Janssen, Thomas W J; Willems, W Jaap

2014-11-01

Range of motion after total shoulder arthroplasty is better than after reverse shoulder arthroplasty, however with similar clinical outcome. It is unclear if this difference can only be found in the different range of motion or also in the force generating capacity. (1) are isokinetically produced joint torques of reverse shoulder arthroplasty comparable to those of total shoulder arthroplasty? (2) Does this force-generating capacity correlate with functional outcome? Eighteen reverse shoulder arthroplasty patients (71years (SD 9years)) (21 shoulders, follow-up of 21months (SD 10months)) were recruited, 12 total shoulder arthroplasty patients (69years (SD 9years)) (14 shoulders, follow-up of 35months (SD 11months)). Pre- and post-operative Constant-Murley scores were obtained; two isokinetic protocols (ab-/adduction and ex-/internal rotations) at 60°/s were performed. Twelve of 18 reverse shoulder arthroplasty patients generated enough speed to perform the test (13 shoulders). Mean ab-/adduction torques are 16.3Nm (SD 5.6Nm) and 20.4Nm (SD 11.8Nm). All total shoulder arthroplasty patients generated enough speed (14 shoulders). Mean ab-/adduction torques are 32.1Nm (SD 13.3Nm) and 43.1Nm (SD 21.5Nm). Only 8 reverse shoulder arthroplasty patients (9 shoulders) could perform ex-/internal rotation tasks and all total shoulder arthroplasty patients. Mean ex-/internal rotation torques are 9.3Nm (SD 4.7Nm) and 9.2Nm (SD 2.1Nm) for reverse shoulder arthroplasty, and 17.9Nm (SD 7.7Nm) and 23.5Nm (SD 10.6Nm) for total shoulder arthroplasty. Significant correlations between sub-scores: activity, mobility and strength and external rotation torques for reverse shoulder arthroplasty. Moderate to strong correlation for sub-scores: strength in relation to abduction, adduction and internal rotation torques for total shoulder arthroplasty. Shoulders with a total shoulder arthroplasty are stronger. This can be explained by the absence of rotator cuff muscles and (probably) medialized center of rotation in reverse shoulder arthroplasty. The strong correlation between external rotation torques and post-operative Constant-Murley sub-scores demonstrates that external rotation is essential for good clinical functioning in reverse shoulder arthroplasty. Copyright © 2014 Elsevier Ltd. All rights reserved.

Computational reverse shoulder prosthesis model: Experimental data and verification.

PubMed

Martins, A; Quental, C; Folgado, J; Ambrósio, J; Monteiro, J; Sarmento, M

2015-09-18

The reverse shoulder prosthesis aims to restore the stability and function of pathological shoulders, but the biomechanical aspects of the geometrical changes induced by the implant are yet to be fully understood. Considering a large-scale musculoskeletal model of the upper limb, the aim of this study is to evaluate how the Delta reverse shoulder prosthesis influences the biomechanical behavior of the shoulder joint. In this study, the kinematic data of an unloaded abduction in the frontal plane and an unloaded forward flexion in the sagittal plane were experimentally acquired through video-imaging for a control group, composed of 10 healthy shoulders, and a reverse shoulder group, composed of 3 reverse shoulders. Synchronously, the EMG data of 7 superficial muscles were also collected. The muscle force sharing problem was solved through the minimization of the metabolic energy consumption. The evaluation of the shoulder kinematics shows an increase in the lateral rotation of the scapula in the reverse shoulder group, and an increase in the contribution of the scapulothoracic joint to the shoulder joint. Regarding the muscle force sharing problem, the musculoskeletal model estimates an increased activity of the deltoid, teres minor, clavicular fibers of the pectoralis major, and coracobrachialis muscles in the reverse shoulder group. The comparison between the muscle forces predicted and the EMG data acquired revealed a good correlation, which provides further confidence in the model. Overall, the shoulder joint reaction force was lower in the reverse shoulder group than in the control group. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reverse shoulder arthroplasty with a cementless short metaphyseal humeral implant without a stem: clinical and radiologic outcomes in prospective 2- to 7-year follow-up study.

PubMed

Levy, Ofer; Narvani, Ali; Hous, Nir; Abraham, Ruben; Relwani, Jai; Pradhan, Riten; Bruguera, Juan; Sforza, Giuseppe; Atoun, Ehud

2016-08-01

Reverse shoulder prostheses are increasingly used in recent years for treatment of glenohumeral arthropathy with deficient rotator cuff. Bone preservation is becoming a major goal in shoulder replacement surgery. Metaphyseal humeral components without a stem were developed to minimize bone resection and preserve bone. This study evaluated the clinical and radiologic outcomes at 2 to 7 years using a novel short metaphyseal reverse total shoulder arthroplasty (rTSA) prosthesis without a diaphyseal stem. Between 2005 and 2010, 102 consecutive patients underwent rTSA with this implant, and 98 (20 men, 78 women) were available for follow-up. Mean age was 74.4 years (range, 38-93 years). Indications were cuff tear arthropathy, 65; fracture sequelae, 12; rheumatoid arthritis, 13; failed rotator cuff repair, 3; cuff deficiency with loosening of anatomic prosthesis, 3; and acute trauma, 2; with 17 of these as revisions. Patients' satisfaction (Subjective Shoulder Value) improved from 8 of 100 to 85 of 100. The Constant score improved from 14 to 59 (age- and sex-adjusted, 86; P < .0001). Range of motion improved from 47° to 129° in elevation, 10° to 51° in external rotation, and 21° to 65° in internal rotation. Radiographic analysis showed no lucencies, subsidence, or stress shielding around the humeral or glenoid components. Glenoid notching was found in 21 patients (18 grade 1-2; 3 grade 3). The short metaphyseal rTSA design without a diaphyseal stem shows encouraging short- to midterm results, with excellent pain relief and shoulder function, restoration of good active range of motion, and high patient satisfaction scores. The design of this implant seems to result in improved rotational movements, low incidence of glenoid notching, and no implant loosening, subsidence, or stress shielding. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Uncommon Indications for Reverse Total Shoulder Arthroplasty

PubMed Central

Hyun, Yoon Suk; Huri, Gazi; Garbis, Nickolas G.

2013-01-01

Total shoulder arthroplasty and shoulder hemiarthroplasty have been the traditional method for treating a variety of shoulder conditions, including arthritis, cuff tear arthropathy, and some fracture types. However, these procedures did not provide consistently good results for patients with torn rotator cuffs. The development of the reverse prosthesis by Grammont in the late 20th century revolutionized the treatment of the rotator-cuff-deficient shoulder with arthritis. The main indication for the reverse prosthesis remains the patient with cuff tear arthropathy who has pain and loss of motion. Because the reverse total shoulder arthroplasty produced such good results in these patients, the indications for the reverse prosthesis have expanded to include other shoulder conditions that have previously been difficult to treat successfully and predictably. This review discusses and critically reviews these newer indications for the reverse total shoulder arthroplasty. PMID:24340143

Effects of cemented versus press-fit primary humeral stem fixation in the setting of revision shoulder arthroplasty.

PubMed

Salesky, Madeleine A; Grace, Trevor R; Feeley, Brian T; Ma, C Benjamin; Zhang, Alan L

2018-05-01

The influence of primary humeral stem fixation method (cemented or press fit) on intraoperative or postoperative outcomes in the setting of revision shoulder arthroplasty is unknown. A retrospective analysis of a prospectively collected cohort of revision shoulder arthroplasty patients from a single tertiary center was performed. Demographic variables, intraoperative data, and 90-day complication rates were compared between cemented and press-fit primary stem fixation cohorts. Follow-up radiographs were graded and compared using a modified Gruen system for humeral lucencies. Eighty-six primary shoulder replacements (34 hemiarthroplasties, 39 anatomic total shoulder arthroplasties, 13 reverse total shoulder arthroplasties) underwent revision arthroplasty with humeral stem removal between 2004 and 2017. Forty-five patients had cemented primary humeral fixation and 41 had press-fit fixation. The cemented cohort was older than the cementless cohort (66.6 vs. 61.4 years; P = .03) but otherwise demonstrated no difference in gender, body mass index, type of primary prosthesis (hemi, total, or reverse), or time between primary and revision operations. The cemented and cementless cohorts showed similar rates of humeral osteotomy (28.9% vs. 29.3%; P = .97), operative time (133.5  vs. 121.3 minutes; P = .16), and 90-day complication rates (13.3% vs. 9.8%; P = .61). Cemented vs. press-fit primary stems also had similar rates of humeral lucencies seen on follow-up radiographs after revision (77.1% vs. 60.6%; P = .14). Humeral stem fixation with or without cement during primary shoulder arthroplasty demonstrated similar operative time, need for intraoperative humeral osteotomy, and postoperative complication rates in the setting of revision arthroplasty. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Emerging Indications for Reverse Shoulder Arthroplasty.

PubMed

Urch, Ekaterina; Dines, Joshua S; Dines, David M

2016-01-01

Historically, reverse shoulder arthroplasty was reserved for older, low-demand patients in whom rotator cuff arthropathy was diagnosed. Other common indications included sequelae of previously treated proximal humerus fractures, failed anatomic total shoulder arthroplasty, tumor resection, and rheumatoid arthritis in the elderly population. Unpredictable implant durability and high complication rates have limited the use of reverse shoulder arthroplasty to a narrow group of patients. Over the past decade, however, research has led to an improved understanding of the biomechanics behind reverse shoulder prostheses, which has improved implant design and surgical techniques. Consequently, orthopaedic surgeons have slowly begun to expand the indications for reverse shoulder arthroplasty to include a wider spectrum of shoulder pathologies. Recent studies have shown promising results for patients who undergo reverse shoulder arthroplasty for the treatment of acute proximal humerus fractures, massive rotator cuff tears without arthropathy, primary osteoarthritis, and chronic anterior dislocation, as well as for younger patients who have rheumatoid arthritis. These data suggest that, with judicious patient selection, reverse shoulder arthroplasty can be an excellent treatment option for a growing patient cohort.

The Contribution of Reverse Shoulder Arthroplasty to Utilization of Primary Shoulder Arthroplasty

PubMed Central

Jain, Nitin B.; Yamaguchi, Ken

2014-01-01

Background We assessed the contribution of reverse shoulder arthroplasty to overall utilization of primary shoulder arthroplasty, and present age and sex stratified national rates of shoulder arthroplasty. We also assessed contemporary complication rates, mortality, and indications for shoulder arthroplasty, as well as estimates and indications for revision arthroplasty. Methods We used the Nationwide Inpatient Samples for 2009–2011 to calculate estimates of shoulder arthroplasty and assessed trends using joinpoint regression. Results The cumulative estimated utilization of primary shoulder arthroplasty (total anatomical, hemi, and reverse) increased significantly from 52,397 procedures (95% CI=47,093–57,701) in 2009 to 67,184 cases (95% CI=60,638–73,731) in 2011. Reverse shoulder arthroplasty accounted for 42% of all primary shoulder arthroplasty procedures in 2011. The diagnosis of concomitant diagnosis of osteoarthritis and rotator cuff impairment was found in only 29.8% of reverse shoulder arthroplasty cases. The highest rate of reverse shoulder arthroplasty was in the 75–84 year female sub-group (77; 95% CI=67–87). Revision cases were 8.8% and 8.2% of all shoulder arthroplasties in 2009 and 2011, respectively, and 35% of revision cases were secondary to mechanical complications/loosening while 18% were due to dislocation. Conclusions The utilization of primary shoulder arthroplasty significantly increased in just a three year time span, with a major contribution from reverse shoulder arthroplasty in 2011. Indications appear to have expanded as a large percentage of patients did not have rotator cuff pathology. The burden from revision arthroplasties was also substantial and efforts to optimize outcomes and longevity of primary shoulder arthroplasty are needed. Level of evidence Epidemiology Study, Database Analysis PMID:25304043

Effect of reverse shoulder design philosophy on muscle moment arms.

PubMed

Hamilton, Matthew A; Diep, Phong; Roche, Chris; Flurin, Pierre Henri; Wright, Thomas W; Zuckerman, Joseph D; Routman, Howard

2015-04-01

This study analyzes the muscle moment arms of three different reverse shoulder design philosophies using a previously published method. Digital bone models of the shoulder were imported into a 3D modeling software and markers placed for the origin and insertion of relevant muscles. The anatomic model was used as a baseline for moment arm calculations. Subsequently, three different reverse shoulder designs were virtually implanted and moment arms were analyzed in abduction and external rotation. The results indicate that the lateral offset between the joint center and the axis of the humerus specific to one reverse shoulder design increased the external rotation moment arms of the posterior deltoid relative to the other reverse shoulder designs. The other muscles analyzed demonstrated differences in the moment arms, but none of the differences reached statistical significance. This study demonstrated how the combination of variables making up different reverse shoulder designs can affect the moment arms of the muscles in different and statistically significant ways. The role of humeral offset in reverse shoulder design has not been previously reported and could have an impact on external rotation and stability achieved post-operatively. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

The anterior deltoid's importance in reverse shoulder arthroplasty: a cadaveric biomechanical study.

PubMed

Schwartz, Daniel G; Kang, Sang Hoon; Lynch, T Sean; Edwards, Sara; Nuber, Gordon; Zhang, Li-Qun; Saltzman, Matthew

2013-03-01

Frequently, patients who are candidates for reverse shoulder arthroplasty have had prior surgery that may compromise the anterior deltoid muscle. There have been conflicting reports on the necessity of the anterior deltoid thus it is unclear whether a dysfunctional anterior deltoid muscle is a contraindication to reverse shoulder arthroplasty. The purpose of this study was to determine the 3-dimensional (3D) moment arms for all 6 deltoid segments, and determine the biomechanical significance of the anterior deltoid before and after reverse shoulder arthroplasty. Eight cadaveric shoulders were evaluated with a 6-axis force/torque sensor to assess the direction of rotation and 3D moment arms for all 6 segments of the deltoid both before and after placement of a reverse shoulder prosthesis. The 2 segments of anterior deltoid were unloaded sequentially to determine their functional role. The 3D moment arms of the deltoid were significantly altered by placement of the reverse shoulder prosthesis. The anterior and middle deltoid abduction moment arms significantly increased after placement of the reverse prosthesis (P < .05). Furthermore, the loss of the anterior deltoid resulted in a significant decrease in both abduction and flexion moments (P < .05). The anterior deltoid is important biomechanically for balanced function after a reverse total shoulder arthroplasty. Losing 1 segment of the anterior deltoid may still allow abduction; however, losing both segments of the anterior deltoid may disrupt balanced abduction. Surgeons should be cautious about performing reverse shoulder arthroplasty in patients who do not have a functioning anterior deltoid muscle. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Comparison of functional outcomes of reverse shoulder arthroplasty with those of hemiarthroplasty in the treatment of cuff-tear arthropathy: a matched-pair analysis.

PubMed

Young, Simon W; Zhu, Mark; Walker, Cameron G; Poon, Peter C

2013-05-15

Rotator cuff-tear arthropathy has traditionally represented a challenge to the shoulder arthroplasty surgeon. The poor results of conventional total shoulder arthroplasty in rotator-cuff-deficient shoulders due to glenoid component loosening have led to hemiarthroplasty being the traditional preferred surgical option. Recently, reverse total shoulder arthroplasty has gained increasing popularity because of a clinical perception of an improved functional outcome, despite the lack of comparative data. The aim of this study was to compare the early functional results of hemiarthroplasty with those of reverse shoulder arthroplasty in the management of cuff-tear arthropathy. The results of 102 primary hemiarthroplasties for rotator cuff-tear arthropathy were compared with those of 102 reverse shoulder arthroplasties performed for the same diagnosis. Patients were identified from the New Zealand Joint Registry and matched for age, sex, and American Society of Anesthesiologists (ASA) scores. Oxford Shoulder Scores (OSS) collected at six months postoperatively as well as mortality and revision rates were compared between the two groups. There were fifty-one men and fifty-one women in each group, with a mean age of 71.6 years in the hemiarthroplasty group and 72.6 years in the reverse shoulder arthroplasty group. The mean OSS at six months was 31.1 in the hemiarthroplasty group and 37.5 in the reverse shoulder arthroplasty group. At the time of follow-up, there were nine revisions in the hemiarthroplasty group and five in the reverse shoulder arthroplasty group. No difference in mortality rate was seen between the two groups. In this unselected population with rotator cuff-tear arthropathy, controlled for age, sex, and ASA score, reverse shoulder arthroplasty resulted in a functional outcome that was superior to that of hemiarthroplasty. Longer-term follow-up is needed to confirm these findings.

Nine-year outcome after anatomic stemless shoulder prosthesis: clinical and radiologic results.

PubMed

Hawi, Nael; Magosch, Petra; Tauber, Mark; Lichtenberg, Sven; Habermeyer, Peter

2017-09-01

Several stemless shoulder implants are available on the market, but only a few studies have presented results with sufficient mid- to long-term follow-up. The present study evaluated clinical and radiologic outcomes 9 years after anatomic stemless shoulder replacement. This is a prospective cohort study evaluating the stemless shoulder prosthesis since 2005. Anatomic stemless shoulder replacement using a single prosthesis was performed in 49 shoulders; 17 underwent total shoulder replacement, and 32 underwent hemiarthroplasty. Forty-three patients were clinically and radiologically monitored after a mean of 9 years (range, 90-127 months; follow-up rate, 88%). The indications for shoulder replacement were primary osteoarthritis in 7 shoulders, post-traumatic in 24, instability in 7, cuff tear arthropathy in 2, postinfectious arthritis in 1, and revision arthroplasty in 2. The Constant-Murley Score improved significantly from 52% to 79% (P < .0001). The active range of motion also increased significantly for flexion from 101° to 118° (P = .022), for abduction from 79° to 105° (P = .02), and for external rotation from 21° to 43° (P < .0001). Radiologic evaluation revealed incomplete radiolucency in 1 patient without clinical significance or further intervention. No revision caused by loosening or countersinking of the humeral implant was observed. The 9-year outcome after stemless shoulder replacement is comparable to that of third- and fourth-generation standard shoulder arthroplasty. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Is reverse total shoulder arthroplasty a feasible treatment option for failed shoulder arthroplasty? A retrospective study of 44 cases with special regards to stemless and stemmed primary implants.

PubMed

Holschen, M; Franetzki, B; Witt, K-A; Liem, D; Steinbeck, J

2017-08-01

Is reverse total shoulder arthroplasty a feasible treatment option for failed shoulder arthroplasty? A retrospective study of 44 cases with special regards to stemless and stemmed primary implants. Due to humeral or glenoid bone-loss and rotator cuff insufficiency reverse total shoulder arthroplasty often means the only remaining treatment option in revision shoulder arthroplasty. This study investigates the clinical outcome of patients treated with a reverse total shoulder in revision cases with special regard to stemless and stemmed primary implants. From 2010 to 2012 60 failed shoulder arthroplasties were converted to reverse total shoulder arthroplasty. Forty-four patients were available for follow-up after a mean of 24 months. Patients were assessed with X-rays, Constant- and ASES Score and a questionnaire about their subjective satisfaction. The total number of observed complications was seven (16%). Ninety-eight percent of the patients were satisfied with their clinical result. Patients achieved a mean normalized constant score of 70.2% and a mean ASES Score of 65.3. Patients with stemless primary implants achieved a higher normalized constant score than patients with stemmed primary implants (82 vs. 61.8%; p = 0009). Reverse total shoulder arthroplasty provides satisfactory clinical results and a high patient satisfaction in revision shoulder arthroplasty. The complication rate needs to be considered and discussed with the patient prior to surgery. Presence or absence of a stem of revised shoulder arthroplasties interferes with the outcome. LEVEL OF EVIDENCE IV: (Retrospective study).

Shoulder replacement

MedlinePlus

... the opening at the end of the shoulder blade, called the socket. This type of joint allows ... head. The socket part (glenoid) of your shoulder blade will be replaced with a smooth plastic shell ( ...

Two-stage reimplantation for treating prosthetic shoulder infections.

PubMed

Sabesan, Vani J; Ho, Jason C; Kovacevic, David; Iannotti, Joseph P

2011-09-01

Two-stage reimplantation for prosthetic joint infection reportedly has the lowest risk for recurrent infection. Most studies to date have evaluated revision surgery for infection using an anatomic prosthetic. As compared with anatomic prostheses, reverse total shoulder arthroplasty is reported to have a higher rate of infection. We determined reinfection rates, functional improvement, types and rates of complications, and influence of rotator cuff tissue on function for two-stage reimplantation for prosthetic joint infection treated with reverse shoulder arthroplasty. We retrospectively reviewed 27 patients treated with a two-stage reimplantation for prosthetic shoulder infection using a uniform protocol for management of infection; of these, 17 had reverse shoulder arthroplasty at second-stage surgery. Types of organisms cultured, recurrence rates, complications, function, and radiographic followup were reviewed for all patients. One of the 17 patients had recurrence of infection. The mean (± SD) Penn shoulder scores for patients treated with reverse shoulder arthroplasty improved from 24.9 ± 22.3 to 66.4 ± 20.8. The average motion at last followup was 123° ± 33° of forward flexion and 26° ± 8° of external rotation in patients treated with a reverse shoulder arthroplasty. The major complication rate was 35% in reverse shoulder arthroplasty, with five dislocations and one reinfection. There was no difference in final Penn score between patients with and without external rotation weakness. Shoulder function and pain improved in patients treated with a second-stage reimplantation of a reverse prosthesis and the reinfection rate was low. Level IV, case series. See Guidelines for Authors for a complete description of levels of evidence.

Prosthetic replacement for proximal humeral fractures.

PubMed

Kontakis, George; Tosounidis, Theodoros; Galanakis, Ioannis; Megas, Panagiotis

2008-12-01

The ideal management of complex proximal humeral fractures continues to be debatable. Evolution of proximal humeral fracture management, during the past decade, led to the implementation of many innovations in surgical treatment. Even though the pendulum of treatment seems to swing towards new trends such as locked plating, hemiarthroplasty remains a valid and reliable option that serves the patient's needs well. Hemiarthroplasty is indicated for complex proximal humeral fractures in elderly patients with poor bone stock and when internal fixation is difficult or unreliable. Hemiarthroplasty provides a better result when it is performed early post-injury. Stem height, retroversion and tuberosity positioning are technical aspects of utmost importance. Additionally reverse total shoulder arthroplasty is an alternative new modality that can be used as a primary solution in selected patients with proximal humeral fracture treatment. Failed hemiarthroplasty and fracture sequelae can be successfully managed with reverse total shoulder arthroplasty. Individual decision-making and tailored treatment that takes into consideration the personality of the fracture and the patient's characteristics should be used.

Reverse shoulder arthroplasty.

PubMed

Jarrett, Claudius D; Brown, Brandon T; Schmidt, Christopher C

2013-07-01

The reverse shoulder arthroplasty is considered to be one of the most significant technological advancements in shoulder reconstructive surgery over the past 30 years. It is able to successfully decrease pain and improve function for patients with rotator cuff-deficient shoulders. The glenoid is transformed into a sphere that articulates with a humeral socket. The current reverse prosthesis shifts the center of rotation more medial and distal, improving the deltoid's mechanical advantage. This design has resulted in successful improvement in both active shoulder elevation and in quality of life. Copyright © 2013 Elsevier Inc. All rights reserved.

Formation of a physiological reverse shoulder joint.

PubMed

Lerner, Markus; Turkmen, Ismail; Bernd, Ludger

2016-01-20

Congenital shoulder deformities are rarely seen in orthopaedic practice. Proximal humeral defects and glenoid hypoplasia have been reported separately in the literature. We present a case involving a 31-year-old woman having a cosmetic problem with her upper arm who was diagnosed with reverse shoulder joint deformity. This article presents the clinical, radiological and biomechanical findings of a physiological reverse shoulder joint. This is the first such reported case. 2016 BMJ Publishing Group Ltd.

[Imaging evaluation on adaptability of proximal humeral anatomy after shoulder replacement with individualized shoulder prosthesis].

PubMed

Shi, Youxing; Tang, Kanglai; Yuan, Chengsong; Tao, Xu; Wang, Huaqing; Chen, Bo; Guo, Yupeng

2015-03-24

Modern shoulder prosthesis has evolved through four generations. And the fourth generation technology has a core three-dimensional design of restoring 3D reconstruction of proximal humeral anatomy. Thus a new shoulder prosthesis is developed on the basis of the technology of 3D prosthesis. Assessment of whether shoulder prosthesis can restore individualized reconstruction of proximal humeral anatomy is based on the adaptability of proximal humeral anatomy. To evaluate the adaptability of proximal humeral anatomy through measuring the parameters of proximal humeral anatomy after shoulder replacement with individualized shoulder prosthesis and compare with normal data. The parameters of proximal humeral anatomy were analyzed and evaluated for a total of 12 cases undergoing shoulder replacement with individualized shoulder prosthesis. The relevant anatomical parameters included neck-shaft angle (NSA), retroversion angle (RA), humeral head height (HH) and humeral head diameter (HD). And the anatomical parameters were compared with the data from normal side. All underwent shoulder replacement with individualized shoulder prosthesis. The postoperative parameters of proximal humeral anatomy were compared with those of normal side. And the difference of NSA was < 3°, RA < 3°, HH < 3 mm and HD < 2 mm. And paired-sample t test was used to study the parameters of proximal humeral anatomy between postoperative and normal side. The normal and postoperative NSA was (140.2 ± 6.8)° and (139.5 ± 6.6)° respectively, RA (34.4 ± 3.3)° and (33.8-3.1)°, HH (15.3 ± 2.1) mm and (14.6+0.9) mm, HW (42.2 ± 2.82) mm and (41.8 ± 2.33) mm respectively. No significant difference existed between two groups (P > 0.05). Individualized shoulder prosthesis has excellent adaptability to shoulder. All core parameters are freely adjustable and specification models may be optimized. With matching tools, individualized shoulder prosthesis improves the accuracy and reliability in shoulder replacement.

Shoulder arthroplasty in osteoarthritis: current concepts in biomechanics and surgical technique

PubMed Central

Merolla, G; Nastrucci, G; Porcellini, G

Shoulder arthroplasty is a technically demanding procedure to restore shoulder function in patients with severe osteoarthritis of the glenohumeral joint. The modern prosthetic system exploit the benefits of modularity and the availibility of additional sizes of the prosthetic components. In this paper we describe the biomechanics of shoulder arthroplasty and the technique for shoulder replacement including total shoulder arthroplasty (TSA) with all-polyethylene and metal-backed glenoid component, humeral head resurfacing and stemless humeral replacement. PMID:24251240

Cost-Effectiveness of Reverse Total Shoulder Arthroplasty Versus Arthroscopic Rotator Cuff Repair for Symptomatic Large and Massive Rotator Cuff Tears.

PubMed

Makhni, Eric C; Swart, Eric; Steinhaus, Michael E; Mather, Richard C; Levine, William N; Bach, Bernard R; Romeo, Anthony A; Verma, Nikhil N

2016-09-01

To compare the cost-effectiveness within the United States health care system of arthroscopic rotator cuff repair versus reverse total shoulder arthroplasty in patients with symptomatic large and massive rotator cuff tears without cuff-tear arthropathy. An expected-value decision analysis was constructed comparing the costs and outcomes of patients undergoing arthroscopic rotator cuff repair and reverse total shoulder arthroplasty for large and massive rotator cuff tears (and excluding cases of cuff-tear arthropathy). Comprehensive literature search provided input data to extrapolate costs and health utility states for these outcomes. The primary outcome assessed was that of incremental cost-effectiveness ratio (ICER) of reverse total shoulder arthroplasty versus rotator cuff repair. For the base case, both arthroscopic rotator cuff repair and reverse total shoulder were superior to nonoperative care, with an ICER of $15,500/quality-adjusted life year (QALY) and $37,400/QALY, respectively. Arthroscopic rotator cuff repair was dominant over primary reverse total shoulder arthroplasty, with lower costs and slightly improved clinical outcomes. Arthroscopic rotator cuff repair was the preferred strategy as long as the lifetime progression rate from retear to end-stage cuff-tear arthropathy was less than 89%. However, when the model was modified to account for worse outcomes when reverse shoulder arthroplasty was performed after a failed attempted rotator cuff repair, primary reverse total shoulder had superior outcomes with an ICER of $90,000/QALY. Arthroscopic rotator cuff repair-despite high rates of tendon retearing-for patients with large and massive rotator cuff tears may be a more cost-effective initial treatment strategy when compared with primary reverse total shoulder arthroplasty and when assuming no detrimental impact of previous surgery on outcomes after arthroplasty. Clinical judgment should still be prioritized when formulating treatment plans for these patients. LEVEL OF EVIDENCE: Level II, economic decision analysis. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

[Results from the German shoulder- and elbow arthroplasty register (SEPR) : Anatomic or reverse shoulder arthroplasty in B2-glenoids?

PubMed

Magosch, P; Habermeyer, P; Lichtenberg, S; Tauber, M; Gohlke, F; Mauch, F; Boehm, D; Loew, M; Zeifang, F; Pötzl, W

2017-12-01

Anatomic shoulder arthroplasty in osteoarthritis with biconcave glenoid wear results in decreased functional results and a higher rate of early glenoid loosening. The aim of the data analysis of the German shoulder arthroplasty register was to clarify whether reverse shoulder arthroplasty can provide better functional results and a lower complication rate than anatomic arthroplasty in osteoarthritis with biconcave glenoid wear. The analysis included 1052 completely documented primary implanted arthroplasties with a minimum follow-up of 2 years. In 119 cases, a B2-type glenoid was present. Out of these cases, 86 were treated with an anatomic shoulder arthroplasty, and in 33 cases a reverse shoulder arthroplasty was implanted. The mean follow-up was 47.6 months. The Constant score with its subcategories, as well as the active range of movement improved significantly after anatomic and after reverse shoulder arthroplasty. We observed no difference in functional results between both types of arthroplasty; however, reverse arthroplasty showed a significant higher revision rate (21.2%) (3% glenoid loosening, 6% prosthetic instability) than anatomic shoulder arthroplasty (12.8%) (11.6% glenoid loosening, 1.2% prosthetic instability), whereas anatomic shoulder arthroplasty showed a higher rate of glenoid loosening. Functional and radiographic results of both types of arthroplasty are comparable with the results reported in the literature, although our analysis represents results from an implant registry (data pertaining to medical care quality).

Resurfacing shoulder arthroplasty for the treatment of severe rheumatoid arthritis: outcome in 167 patients from the Danish Shoulder Registry.

PubMed

Voorde, Pia C Ten; Rasmussen, Jeppe V; Olsen, Bo S; Brorson, Stig

2015-06-01

There is no consensus on which type of shoulder prosthesis should be used in patients with rheumatoid arthritis (RA). We describe patients with RA who were treated with shoulder replacement, regarding patient-reported outcome, prosthesis survival, and causes of revision, and we compare outcome after resurfacing hemi-arthroplasty (RHA) and stemmed hemi-arthroplasty (SHA). We used data from the national Danish Shoulder Arthroplasty Registry and included patients with RA who underwent shoulder arthroplasty in Denmark between 2006 and 2010. Patient-reported outcome was obtained 1-year postoperatively using the Western Ontario Osteoarthritis of the Shoulder index (WOOS), and rates of revision were calculated by checking revisions reported until December 2011. The patient-reported outcome of RHA was compared to that of SHA using regression analysis with adjustment for age, sex, and previous surgery. During the study period, 167 patients underwent shoulder arthroplasty because of rheumatoid arthritis, 80 (48%) of whom received RHA and 34 (26%) of whom received SHA. 16 patients were treated with total stemmed shoulder arthroplasty (TSA), and 24 were treated with reverse shoulder arthroplasty (rTSA). 130 patients returned a completed questionnaire, and the total mean WOOS score was 63. The cumulative 5-year revision rate was 7%. Most revisions occurred after RHA, with a revision rate of 14%. Mean WOOS score was similar for RHA and for SHA. This study shows that shoulder arthroplasty, regardless of design, is a good option in terms of reducing pain and improving function in RA patients. The high revision rate in the RHA group suggests that other designs may offer better implant survival. However, this should be confirmed in larger studies.

Reverse shoulder arthroplasty for deltoid-deficient shoulder following latissimus dorsi flap transfer. Case report.

PubMed

Dosari, Mohamed Al Ateeq Al; Hameed, Shamsi; Mukhtar, Khalid; Elmhiregh, Aissam

2017-01-01

The usual indication for reverse shoulder arthroplasty is glenohumeral arthritis with inadequate rotator cuff and intact deltoid muscle. We report here a case of reverse shoulder arthroplasty using a lattisimus dorsi flap in a patient with deltoid-deficient shoulder following a gunshot injury. The patient was an otherwise healthy 51-year-old male with a history of gunshot injury of the left shoulder 2006. Upon presentation in 2011, the patient had a loss of most of his shoulder bony and muscular structures. Due to deltoid muscle deficiency, the patient underwent Lattisimus Dorsi muscle flap followed by reverse shoulder arthroplasty in order to establish an upper limb function. Upon discharge, 11days after the surgery, the patient was able to achieve 150° flexion and 90° abduction while in the supine position and 45° in each direction, while sitting. He was able to perform internal rotation (behind back) up to the level of the L1 vertebra, assisted active abduction of 90°, and external rotation of 20°. Power tests showed power of grade 4/5 for both shoulder flexion and extension and grade 2+/5 for both abduction and adduction. At the last follow up one year after the operation, The patient still had passive pain-free full range of motion, but no progress in active range of motion beyond that upon discharge. Reverse shoulder arthroplasty after Latissmus dori flap in patient with deltoid deficient shoulders can be a successful and reproducible approach to treat such conditions. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Bony increased-offset reversed shoulder arthroplasty: minimizing scapular impingement while maximizing glenoid fixation.

PubMed

Boileau, Pascal; Moineau, Grégory; Roussanne, Yannick; O'Shea, Kieran

2011-09-01

Scapular notching, prosthetic instability, limited shoulder rotation and loss of shoulder contour are associated with conventional medialized design reverse shoulder arthroplasty. Prosthetic (ie, metallic) lateralization increases torque at the baseplate-glenoid interface potentially leading to failure. We asked whether bony lateralization of reverse shoulder arthroplasty would avoid the problems caused by humeral medialization without increasing torque or shear force applied to the glenoid component. We prospectively followed 42 patients with rotator cuff deficiency treated with bony increased-offset reverse shoulder arthroplasty. A cylinder of autologous cancellous bone graft, harvested from the humeral head, was placed between the reamed glenoid surface and baseplate. Graft and baseplate fixation was achieved using a lengthened central peg (25 mm) and four screws. Patients underwent clinical, radiographic, and CT assessment at a minimum of 2 years after surgery. The humeral graft incorporated completely in 98% of cases (41 of 42) and partially in one. At a mean of 28 months postoperatively, no graft resorption, glenoid loosening, or postoperative instability was observed. Inferior scapular notching occurred in 19% (eight of 42). The absolute Constant-Murley score improved from 31 to 67. Thirty-six patients (86%) were able to internally rotate sufficiently to reach their back over the sacrum. Grafting of the glenoid surface during reverse shoulder arthroplasty effectively creates a long-necked scapula, providing the benefits of lateralization. Bony increased-offset reverse shoulder arthroplasty is associated with low rates of inferior scapular notching, improved shoulder rotation, no prosthetic instability and improved shoulder contour. In contrast to metallic lateralization, bony lateralization has the advantage of maintaining the prosthetic center of rotation at the prosthesis-bone interface, thus minimizing torque on the glenoid component. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Hierarchy of stability factors in reverse shoulder arthroplasty.

PubMed

Gutiérrez, Sergio; Keller, Tony S; Levy, Jonathan C; Lee, William E; Luo, Zong-Ping

2008-03-01

Reverse shoulder arthroplasty is being used more frequently to treat irreparable rotator cuff tears in the presence of glenohumeral arthritis and instability. To date, however, design features and functions of reverse shoulder arthroplasty, which may be associated with subluxation and dislocation of these implants, have been poorly understood. We asked: (1) what is the hierarchy of importance of joint compressive force, prosthetic socket depth, and glenosphere size in relation to stability, and (2) is this hierarchy defined by underlying and theoretically predictable joint contact characteristics? We examined the intrinsic stability in terms of the force required to dislocate the humerosocket from the glenosphere of eight commercially available reverse shoulder arthroplasty devices. The hierarchy of factors was led by compressive force followed by socket depth; glenosphere size played a much lesser role in stability of the reverse shoulder arthroplasty device. Similar results were predicted by a mathematical model, suggesting the stability was determined primarily by compressive forces generated by muscles.

Sports after shoulder arthroplasty: a comparative analysis of hemiarthroplasty and reverse total shoulder replacement.

PubMed

Liu, Joseph N; Garcia, Grant H; Mahony, Gregory; Wu, Hao-Hua; Dines, David M; Warren, Russell F; Gulotta, Lawrence V

2016-06-01

Traditionally, fewer postoperative sport restrictions are imposed on hemiarthroplasty (HHA) patients on than reverse total shoulder arthroplasty (RTSA) patients. However, functional outcomes have been shown to be superior in RTSA. No direct comparison of RTSA vs HHA has been done on rates of return to sports in patients with glenohumeral arthritis and rotator cuff dysfunction, proximal humeral fractures, or rheumatoid arthritis. This is a retrospective review of consecutive RTSA and HHA patients collected from our institution's shoulder arthroplasty registry. All patients playing sports preoperatively with minimum 1-year follow-up were included. Final follow-up included an additional patient-reported questionnaire with questions regarding physical fitness and sport activities. The study included 102 RTSA and 71 HHA patients. Average age at surgery was 72.3 years for RTSA compared with 65.6 years for HHA (P < .001). Patients undergoing RTSA had improved visual analog scale scores compared with HHA (-5.6 vs -4.2, P = .007), returned to sports after RTSA at a significantly higher rate (85.9% vs 66.7%, P = .02), and were more likely to be satisfied with their ability to play sports (P = .013). HHA patients were also more likely to have postoperative complaints than RTSA patients (63% vs 29%, P < .0001). No sports-related complications occurred. Female sex, age <70 years, surgery on the dominant extremity, and a preoperative diagnosis of arthritis with rotator cuff dysfunction predicted a higher likelihood of return to sports for patients undergoing RTSA compared with HHA. Despite traditional sport restrictions placed on RTSA, patients undergoing RTSA can return to sports at rates higher than those undergoing HHA, with fewer postoperative complaints. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Initial glenoid fixation using two different reverse shoulder designs with an equivalent center of rotation in a low-density and high-density bone substitute.

PubMed

Stroud, Nicholas J; DiPaola, Matthew J; Martin, Brian L; Steiler, Cindy A; Flurin, Pierre-Henri; Wright, Thomas W; Zuckerman, Joseph D; Roche, Christopher P

2013-11-01

Numerous glenoid implant designs have been introduced into the global marketplace in recent years; however, little comparative biomechanical data exist to substantiate one design consideration over another. This study dynamically evaluated reverse shoulder glenoid baseplate fixation and compared the initial fixation associated with 2 reverse shoulder designs having an equivalent center of rotation in low-density and high-density bone substitute substrates. Significant differences in fixation were observed between implant designs, where the circular-porous reverse shoulder was associated with approximately twice the micromotion per equivalent test than the oblong-grit-blasted design. Additionally, 6 of the 7 circular-porous reverse shoulders failed catastrophically in the low-density bone model at an average of 2603 ± 981 cycles. None of the oblong-grit-blasted designs failed in the low-or high-density bone models and none of the circular-porous designs failed in the high-density bone models after 10,000 cycles of loading. These results demonstrate that significant differences in initial fixation exist between reverse shoulder implants having an equivalent center of rotation and suggest that design parameters, other than the position of the center of rotation, significantly affect fixation in low-density and high-density polyurethane bone substitutes. Subtle changes in glenoid baseplate design can dramatically affect fixation, particularly in low-density bone substitutes that are intended to simulate the bone quality of the recipient population for reverse shoulders. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Reverse shoulder arthroplasty due to glenoid bone defects.

PubMed

Díaz Miñarro, J C; Izquierdo Fernández, A; Muñoz Reyes, F; Carpintero Lluch, R; Uceda Carrascosa, P; Muñoz Luna, F; López Jordán, A; Carpintero Benítez, P

2016-01-01

Reverse shoulder arthroplasty is becoming a useful tool for many diseases of the shoulder. Any severe glenoid bone defect may affect the fixing of the glenoid component. The aim of this paper is to evaluate the medium-term outcomes of reverse shoulder arthroplasty associated with a glenoplasty. A retrospective study was conducted on 5 patients from our hospital, selected due to glenoid defects of different etiology. All of them where treated with reverse shoulder arthroplasty associated with glenoplasty with bone graft. The minimum follow-up was one year (mean 30.4 months). All grafts were radiologically integrated, with no signs of resorption or necrosis being observed. At 12 months, the Constant score was 66.75 and the mean EVA score was 1. Glenoplasty surgery is technically demanding for restoring original bone size in patients with glenoid structural defects, enabling a reverse shoulder arthroplasty to be implanted. Thus improving both the function and clinical outcomes in selected patients with glenohumeral pathology and providing them with a solution. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

Outcomes Study of the TM Reverse Shoulder System Used in Primary or Revision Reverse Total Shoulder Arthroplasty

ClinicalTrials.gov

2018-02-13

Osteoarthritis; Rheumatoid Arthritis; Post-traumatic Arthritis; Ununited Humeral Head Fracture; Irreducible 3-and 4-part Proximal Humeral Fractures; Avascular Necrosis; Gross Rotator Cuff Deficiency; Failed Total Shoulder Arthroplasty (Both Glenoid and Humeral Components Require Revision

Mid-term shoulder functional and quality of life outcomes after shoulder replacement in obese patients.

PubMed

Vincent, Heather K; Struk, Aimee M; Reed, Austin; Wright, Thomas W

2016-01-01

Shoulder pain and loss of function are directly associated with obesity. We hypothesized that significant interactions would exist between total shoulder arthroplasty (TSA) and reverse total shoulder arthroplasty (RSA) and obesity status on functional and quality of life (QOL) outcomes over the long term. Clinical and QOL outcomes (American Shoulder and Elbow Surgeons Evaluation form, Shoulder Pain and Disability Index, University of California at Los Angeles Shoulder Rating scale, Medical Outcomes Short Form 12 (SF-12), range of motion (ROM), and strength) were longitudinally compared in patients with low and high body mass index (BMI) after a TSA or a RSA. Prospectively collected data of patients with a TSA or RSA were reviewed (N = 310). Preoperative, 2-year, and final follow-up visits were included (range 3-17 years; mean 5.0 ± 2.5 years). Patient data were stratified for analysis using BMI. Morbidly obese patients had worse preoperative functional scores and QOL compared to the other groups. There were no significant interactions of BMI group by surgery type for any of the outcome variables except for active external rotation ROM. Morbidly obese patients attained lower SF-12 scores compared to the remaining groups at each time point. Both TSA and RSA can be expected to impart positive functional outcomes in patients irrespective of BMI. Morbidly obese patients do not attain the same gains in Medical Outcomes SF-12 scores as the non-morbidly obese patients. The lower improvements in active external ROM may be due to morphological limitations of excessive adiposity. This is a level II study.

Allograft-prosthetic composite reverse total shoulder arthroplasty for reconstruction of proximal humerus tumor resections.

PubMed

King, Joseph J; Nystrom, Lukas M; Reimer, Nickolas B; Gibbs, C Parker; Scarborough, Mark T; Wright, Thomas W

2016-01-01

Proximal humerus reconstructions after resection of tumors are challenging. Early success of the reverse shoulder arthroplasty for reconstructions has recently been reported. The reverse allograft-prosthetic composite offers the advantage of improved glenohumeral stability compared with hemiarthroplasty for proximal humeral reconstructions as it uses the deltoid for stability. This article describes the technique for treating proximal humeral tumors, including preoperative planning, biopsy principles, resection pearls, soft tissue tensioning, and specifics about reconstruction using the reverse allograft-prosthetic composite. Two cases are presented along with the functional outcomes with use of this technique. Biomechanical considerations during reconstruction are reviewed, including techniques to improve the deltoid compression force. Reported instability rates are less with reverse shoulder arthroplasty reconstruction as opposed to hemiarthroplasty or total shoulder arthroplasty reconstructions of tumor resections. Reported functional outcomes are promising for the reverse allograft-prosthetic composite reconstructions, although complications are reported. Reverse allograft-prosthetic composites are a promising option for proximal humeral reconstructions, although nonunion of the allograft-host bone junction continues to be a challenge for this technique. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Local infiltration analgesia versus continuous interscalene brachial plexus block for shoulder replacement pain: a randomized clinical trial.

PubMed

Bjørnholdt, Karen T; Jensen, Jan M; Bendtsen, Thomas F; Søballe, Kjeld; Nikolajsen, Lone

2015-12-01

Shoulder replacement involves significant post-operative pain, which is often managed by continuous interscalene brachial plexus block. Catheter displacement and complications limit the beneficial effect of the block. Local infiltration analgesia (LIA) has provided good results in knee replacement. We aimed to assess the effectiveness of LIA for pain after shoulder replacement. Patients scheduled for primary shoulder replacement under general anaesthesia were randomized to receive either local infiltration analgesia (LIA) (150 ml ropivacaine 0.2 % with epinephrine intra-operatively) or interscalene brachial plexus catheter (ISC) (ropivacaine 0.75 %, 7 ml bolus followed by 48-h 5 ml/h infusion). The primary outcome was opioid consumption during the first 24 post-operative hours. Secondary outcomes were pain ratings, supplementary analgesics, and side effects for 3 days, and complications until 3 months after surgery. Data were analysed for 61 patients (LIA 30, ISC 31). Twenty-four-hour opioid consumption was higher in the LIA group compared with the ISC group: median (IQR) 95 mg (70-150 mg) versus 40 mg (8-76 mg) (P = 0.0001). No significant difference in opioid consumption was found between groups during the following 3 days. The LIA group had higher pain scores at 0, 2, 4, and 8 h. Two patients in the ISC group had long-lasting complications. The LIA technique cannot be recommended for shoulder replacement unless substantially modified. Occurrence of inadequate analgesia and complications following interscalene brachial plexus block prompt further studies into pain management after shoulder replacement.

Web Page Content and Quality Assessed for Shoulder Replacement.

PubMed

Matthews, John R; Harrison, Caitlyn M; Hughes, Travis M; Dezfuli, Bobby; Sheppard, Joseph

2016-01-01

The Internet has become a major source for obtaining health-related information. This study assesses and compares the quality of information available online for shoulder replacement using medical (total shoulder arthroplasty [TSA]) and nontechnical (shoulder replacement [SR]) terminology. Three evaluators reviewed 90 websites for each search term across 3 search engines (Google, Yahoo, and Bing). Websites were grouped into categories, identified as commercial or noncommercial, and evaluated with the DISCERN questionnaire. Total shoulder arthroplasty provided 53 unique sites compared to 38 websites for SR. Of the 53 TSA websites, 30% were health professional-oriented websites versus 18% of SR websites. Shoulder replacement websites provided more patient-oriented information at 48%, versus 45% of TSA websites. In total, SR websites provided 47% (42/90) noncommercial websites, with the highest number seen in Yahoo, compared with TSA at 37% (33/90), with Google providing 13 of the 33 websites (39%). Using the nonmedical terminology with Yahoo's search engine returned the most noncommercial and patient-oriented websites. However, the quality of information found online was highly variable, with most websites being unreliable and incomplete, regardless of search term.

Constrained fixed-fulcrum reverse shoulder arthroplasty improves functional outcome in epileptic patients with recurrent shoulder instability

PubMed Central

Thangarajah, Tanujan; Higgs, Deborah; Bayley, J I L; Lambert, Simon M

2016-01-01

AIM: To report the results of fixed-fulcrum fully constrained reverse shoulder arthroplasty for the treatment of recurrent shoulder instability in patients with epilepsy. METHODS: A retrospective review was conducted at a single facility. Cases were identified using a computerized database and all clinic notes and operative reports were reviewed. All patients with epilepsy and recurrent shoulder instability were included for study. Between July 2003 and August 2011 five shoulders in five consecutive patients with epilepsy underwent fixed-fulcrum fully constrained reverse shoulder arthroplasty for recurrent anterior shoulder instability. The mean duration of epilepsy in the cohort was 21 years (range, 5-51) and all patients suffered from grand mal seizures. RESULTS: Mean age at the time of surgery was 47 years (range, 32-64). The cohort consisted of four males and one female. Mean follow-up was 4.7 years (range, 4.3-5 years). There were no further episodes of instability, and no further stabilisation or revision procedures were performed. The mean Oxford shoulder instability score improved from 8 preoperatively (range, 5-15) to 30 postoperatively (range, 16-37) (P = 0.015) and the mean subjective shoulder value improved from 20 (range, 0-50) preoperatively to 60 (range, 50-70) postoperatively (P = 0.016). Mean active forward elevation improved from 71° preoperatively (range, 45°-130°) to 100° postoperatively (range, 80°-90°) and mean active external rotation improved from 15° preoperatively (range, 0°-30°) to 40° (20°-70°) postoperatively. No cases of scapular notching or loosening were noted. CONCLUSION: Fixed-fulcrum fully constrained reverse shoulder arthroplasty should be considered for the treatment of recurrent shoulder instability in patients with epilepsy. PMID:27458554

Glenoid bone grafting in primary reverse total shoulder arthroplasty.

PubMed

Ernstbrunner, Lukas; Werthel, Jean-David; Wagner, Eric; Hatta, Taku; Sperling, John W; Cofield, Robert H

2017-08-01

Severe glenoid bone loss remains a challenge in patients requiring shoulder arthroplasty and may necessitate glenoid bone grafting. The purpose of this study was to determine results, complications, and rates of failure of glenoid bone grafting in primary reverse shoulder arthroplasty. Forty-one shoulders that underwent primary reverse arthroplasty between 2006 and 2013 with a minimum follow-up of 2 years (mean, 2.8 years; range, 2-6 years) were reviewed. Thirty-four (83%) received corticocancellous grafts and 7 (17%) structural grafts. Active range of motion and pain levels were significantly improved (P < .001), with mean American Shoulder and Elbow Surgeons score of 77, Simple Shoulder Test score of 9, and patient satisfaction of 93% at the most recent follow-up. Preoperative severe glenoid erosion and increasing body mass index were significantly associated with worse American Shoulder and Elbow Surgeons scores (P = .04). On radiographic evaluation, 7 patients (18%) had grade 1 or grade 2 glenoid lucency. Glenoid bone graft incorporation was observed in 31 patients (78%). Twelve patients (30%) suffered from grade 1 or grade 2 scapular notching. All of the patients with structural grafts showed graft incorporation and no signs of glenoid lucency. Although glenoid lucency, glenoid graft resorption, and scapular notching were present at short-term to midterm follow-up, none of the patients needed revision surgery. Primary reverse shoulder arthroplasty with glenoid reconstruction using bone graft relieved pain and restored shoulder function and stability. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The effect of surgeon and hospital volume on shoulder arthroplasty perioperative quality metrics.

PubMed

Singh, Anshu; Yian, Edward H; Dillon, Mark T; Takayanagi, Miwa; Burke, Mary F; Navarro, Ronald A

2014-08-01

There has been a significant increase in both the incidence of shoulder arthroplasty and the number of surgeons performing these procedures. Literature regarding the relationship between surgeon or hospital volume and the performance of modern shoulder arthroplasty is limited. This study examines the effect of surgeon or hospital shoulder arthroplasty volume on perioperative metrics related to shoulder hemiarthroplasty, total shoulder arthroplasty, and reverse shoulder arthroplasty. Blood loss, length of stay, and operative time were the main endpoints analyzed. Prospective data were analyzed from a multicenter shoulder arthroplasty registry; 1176 primary shoulder arthroplasty cases were analyzed. Correlation and analysis of covariance were used to examine the association between surgeon and hospital volume and perioperative metrics adjusting for age, sex, and body mass index. Surgeon volume is inversely correlated with length of stay for hemiarthroplasty and total shoulder arthroplasty and with blood loss and operative time for all 3 procedures. Hospital volume is inversely correlated with length of stay for hemiarthroplasty, with blood loss for total and reverse shoulder arthroplasty, and with operative time for all 3 procedures. High-volume surgeons performed shoulder arthroplasty 30 to 50 minutes faster than low-volume surgeons did. Higher surgeon and hospital case volumes led to improved perioperative metrics with all shoulder arthroplasty procedures, including reverse total shoulder arthroplasty, which has not been previously described in the literature. Surgeon volume had a larger effect on metrics than hospital volume did. This study supports the concept that complex shoulder procedures are, on average, performed more efficiently by higher volume surgeons in higher volume centers. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Posterior shoulder dislocation with a reverse Hill-Sachs lesion treated with frozen femoral head bone allograft combined with osteochondral autograft transfer.

PubMed

Mastrokalos, Dimitrios S; Panagopoulos, Georgios N; Galanopoulos, Ioannis P; Papagelopoulos, Panayiotis J

2017-10-01

Management of a posterior shoulder dislocation with an associated reverse Hill-Sachs lesion is challenging, both diagnostically and therapeutically. Diagnosis is frequently delayed or missed, whereas the resulting humeral head defect is often larger and more difficult to salvage than in anterior shoulder dislocations. This report presents the case of a 29-year-old male with a recurrent posterior shoulder dislocation associated with a large reverse Hill-Sachs defect, treated with bone augmentation of the lesion with a combination of fresh femoral head allograft and a locally harvested humeral head autograft transfer, with a successful outcome. Level of evidence V.

The influence of critical shoulder angle on secondary rotator cuff insufficiency following shoulder arthroplasty.

PubMed

Cerciello, Simone; Monk, Andrew Paul; Visonà, Enrico; Carbone, Stefano; Edwards, Thomas Bradley; Maffulli, Nicola; Walch, Gilles

2017-07-01

Secondary cuff failure after shoulder replacement is disabling and often requires additional surgery. Increased critical shoulder angle (CSA) has been found in patients with cuff tear compared to normal subjects. The interobserver reliability of the CSA and the relationship between CSA and symptomatic secondary cuff failure after shoulder replacement were investigated. Nineteen patients with symptomatic cuff failure after anatomic shoulder replacement (mean FU 45 months) were compared to a control group of 29 patients showing no signs of symptomatic cuff failure (mean FU 105.7 months). The CSA was measured by two blinded surgeons at a mean follow-up of 45 and 105.7 months, respectively. Inter-observer reliability was calculated. The mean CSA in the study group in neutral, internal and external rotations were 33°, 34° and 34°, respectively. Corresponding values in the control group were 32°, 32° and 32°. The interclass correlation coefficient for the whole population between the two examiners were 0.956 (P < 0.01), 0.964 (P < 0.01) and 0.955 (P < 0.01), respectively. There were no significant differences of CSA values between patients who had undergone shoulder replacement and experienced late cuff failure and those in whom the same procedure had been successful. A good inter-observer reliability was found for the CSA method.

Biomechanical comparison of reverse total shoulder arthroplasty systems in soft tissue-constrained shoulders.

PubMed

Henninger, Heath B; King, Frank K; Tashjian, Robert Z; Burks, Robert T

2014-05-01

Numerous studies have examined the biomechanics of isolated variables in reverse total shoulder arthroplasty. This study directly compared the composite performance of two reverse total shoulder arthroplasty systems; each system was designed around either a medialized or a lateralized glenohumeral center of rotation. Seven pairs of shoulders were tested on a biomechanical simulator. Center of rotation, position of the humerus, passive and active range of motion, and force to abduct the arm were quantified. Native arms were tested, implanted with a Tornier Aequalis or DJO Surgical Reverse Shoulder Prosthesis (RSP), and then retested. Differences from the native state were then documented. Both systems shifted the center of rotation medially and inferiorly relative to native. Medial shifts were greater in the Aequalis implant (P < .037). All humeri shifted inferior compared with native but moved medially with the Aequalis (P < .001). Peak passive abduction, internal rotation, and external rotation did not differ between systems (P > .05). Both reverse total shoulder arthroplasty systems exhibited adduction deficits, but the RSP implant deficit was smaller (P = .046 between implants). Both systems reduced forces to abduct the arm compared with native, although the Aequalis required more force to initiate motion from the resting position (P = .022). Given the differences in system designs and configurations, outcome variables were generally comparable. The RSP implant allowed slightly more adduction, had a more lateralized humeral position, and required less force to initiate elevation. These factors may play roles in limiting scapular notching, improving active external rotation by normalizing the residual rotator cuff length, and limiting excessive stress on the deltoid. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Effect of Humeral Component Version on Outcomes in Reverse Shoulder Arthroplasty.

PubMed

Aleem, Alexander W; Feeley, Brian T; Austin, Luke S; Ma, C Benjamin; Krupp, Ryan J; Ramsey, Matthew L; Getz, Charles L

2017-05-01

Although reverse shoulder arthroplasty provides excellent clinical results in appropriately selected patients, loss of external and internal rotation may occur. Component selection, design, and placement affect postoperative results. Recent studies considered the effect of humeral component version on functional results. The current study investigated whether humeral stem retroversion affects the outcomes of reverse shoulder arthroplasty with a retrospective review of a multisurgeon, industry-sponsored, prospectively gathered database of a single reverse shoulder arthroplasty implant. All patients had at least 2-year follow-up. Clinical outcomes, including American Shoulder and Elbow Surgeons score, visual analog scale pain score, Short Form-12 Mental and Physical Component scores, range of motion, and internal rotation function, were compared between patients with humeral retroversion of 10° or less (group A) and those with humeral retroversion of 20° or greater (group B). Radiographic outcomes were compared. The analysis included 64 patients (group A, 29 patients; group B, 35 patients). No clinical or statistically significant difference was found in American Shoulder and Elbow Surgeons scores. Both groups showed statistical and clinical improvement vs preoperative scores, with group A averaging 77.8 and group B averaging 79.2 at final follow-up. No differences were found between groups in range of motion or ability to perform tasks that require shoulder internal rotation. Patients can expect good clinical improvement after reverse shoulder arthroplasty. No difference was found in clinical or radiologic outcomes based on humeral component retroversion. Despite the theoretical increase in external rotation when the humeral component is placed closer to native retroversion, the results did not show this effect. [Orthopedics. 2017; 40(3):179-186.]. Copyright 2017, SLACK Incorporated.

Reverse total shoulder arthroplasty: research models

PubMed Central

PETRILLO, STEFANO; LONGO, UMILE GIUSEPPE; GULOTTA, LAWRENCE V.; BERTON, ALESSANDRA; KONTAXIS, ANDREAS; WRIGHT, TIMOTHY; DENARO, VINCENZO

2016-01-01

Purpose the past decade has seen a considerable increase in the use of research models to study reverse total shoulder arthroplasty (RTSA). Nevertheless, none of these models has been shown to completely reflect real in vivo conditions. Methods we performed a systematic review of the literature matching the following key words: “reverse total shoulder arthroplasty” or “reverse total shoulder replacement” or “reverse total shoulder prosthesis” and “research models” or “biomechanical models” or “physical simulators” or “virtual simulators”. The following databases were screened: Medline, Google Scholar, EMBASE, CINAHIL and Ovid. We identified and included all articles reporting research models of any kind, such as physical or virtual simulators, in which RTSA and the glenohumeral joint were reproduced. Results computer models and cadaveric models are the most commonly used, and they were shown to be reliable in simulating in vivo conditions. Bone substitute models have been used in a few studies. Mechanical testing machines provided useful information on stability factors in RTSA. Conclusion because of the limitations of each individual model, additional research is required to develop a research model of RTSA that may reduce the limitations of those presently available, and increase the reproducibility of this technique in the clinical setting. PMID:28217660

Use of a shorter humeral stem in revision reverse shoulder arthroplasty.

PubMed

Wagner, Eric R; Statz, Joseph M; Houdek, Matthew T; Cofield, Robert H; Sánchez-Sotelo, Joaquín; Sperling, John W

2017-08-01

The purpose of this study was to examine the outcomes of revision reverse arthroplasty using short bone-preserving humeral components in revising a long-stemmed component. During a 7-year period, 39 patients who underwent revision reverse shoulder arthroplasty using the long to short humeral component technique were included. The mean age was 72 years. Prior implants used in the primary setting included anatomic (n = 26), hemiarthroplasty (n = 11), and reverse (n = 2). At a follow-up of 3 years (2-5), 5 shoulders (13%) required revision surgery, including 1 for a periprosthetic humerus fracture and 4 for glenoid component loosening. The survival free of revision for any reason and revision for humeral disease was 84% and 94%, respectively. One patient experienced a nondisplaced greater tuberosity fracture at 18 months postoperatively that healed without operative intervention. There were no dislocations or infections. Overall, patients experienced excellent overall improvements in their pain levels and shoulder motion (P < .001), with a postoperative 91% satisfaction rate as well as postoperative American Shoulder and Elbow Surgeons score of 68 and Simple Shoulder Test score of 6.7. At most recent radiographic follow-up, 1 (5%) patient had grade 3 humeral lucency. Preserving bone stock through conversion to a shorter reverse humeral stem in the revision setting is a reasonable option with good short- to intermediate-term results and low rates of humeral complications. Using the shorter stem components provides adequate stability and high rates of humeral component ingrowth. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Kinematic evaluation of patients with total and reverse shoulder arthroplasty during rehabilitation exercises with different loads.

PubMed

de Toledo, Joelly Mahnic; Loss, Jefferson Fagundes; Janssen, Thomas W; van der Scheer, Jan W; Alta, Tjarco D; Willems, W Jaap; Veeger, DirkJan H E J

2012-10-01

Following shoulder arthroplasty, any well-planned rehabilitation program should include muscle strengthening. However, it is not always clear how different external loads influence shoulder kinematics in patients with shoulder prostheses. The objective of this study was to describe shoulder kinematics and determine the contribution of the scapulothoracic joint to total shoulder motion of patients with total and reverse shoulder arthroplasties and of healthy individuals during rehabilitation exercises (anteflexion and elevation in the scapular plane) using different loading conditions (without external load, 1 kg and elastic resistance). Shoulder motions were measured using an electromagnetic tracking device. A force transducer was used to record force signals during loaded conditions using elastic resistance. Statistical comparisons were made using a three-way repeated-measures analysis of variance with a Bonferroni post hoc testing. The scapula contributed more to movement of the arm in subjects with prostheses compared to healthy subjects. The same applies for loaded conditions (1 kg and elastic resistance) relative to unloaded tasks. For scapular internal rotation, upward rotation and posterior tilt no significant differences among groups were found during both exercises. Glenohumeral elevation angles during anteflexion were significantly higher in the total shoulder arthroplasty group compared to the reverse shoulder arthroplasty group. Differences in contribution of the scapula to total shoulder motion between patients with different types of arthroplasties were not significant. However, compared to healthy subjects, they were. Furthermore, scapular kinematics of patients with shoulder arthroplasty was influenced by implementation of external loads, but not by the type of load. Copyright © 2012 Elsevier Ltd. All rights reserved.

Reverse arthroplasty for osteoarthritis and rotator cuff deficiency after previous surgery for recurrent anterior shoulder instability.

PubMed

Raiss, Patric; Zeifang, Felix; Pons-Villanueva, Juan; Smithers, Christopher J; Loew, Markus; Walch, Gilles

2014-07-01

Osteoarthritis in combination with rotator cuff deficiency following previous shoulder stabilisation surgery and after failed surgical treatment for chronic anterior shoulder dislocation is a challenging condition. The aim of this study was to analyse the results of reverse shoulder arthroplasty in such patients. Thirteen patients with a median follow-up of 3.5 (range two to eight) years and a median age of 70 (range 48-82) years were included. In all shoulders a tear of at least one rotator cuff tendon in combination with osteoarthritis was present at the time of arthroplasty. The Constant score, shoulder flexion and external and internal rotation with the elbow at the side were documented pre-operatively and at the final follow-up. Pre-operative, immediate post-operative and final follow-up radiographs were analysed. All complications and revisions were documented. Twelve patients were either satisfied or very satisfied with the procedure. The median Constant score increased from 26 points pre-operatively to 67 points at the final follow-up (p = 0.001). The median shoulder flexion increased significantly from 70° to 130° and internal rotation from two to four points (p = 0.002). External rotation did not change significantly (p = 0.55). Glenoid notching was present in five cases and was graded as mild in three cases and moderate in two. One complication occurred leading to revision surgery. Reverse arthroplasty leads to high satisfaction rates for patients with osteoarthritis and rotator cuff deficiency who had undergone previous shoulder stabilisation procedures. The improvements in clinical outcome as well as the radiographic results seem to be comparable with those of other studies reporting on the outcome of reverse shoulder arthroplasty for other conditions.

Effect of deltoid tension and humeral version in reverse total shoulder arthroplasty: a biomechanical study.

PubMed

Henninger, Heath B; Barg, Alexej; Anderson, Andrew E; Bachus, Kent N; Tashjian, Robert Z; Burks, Robert T

2012-04-01

No clear recommendations exist regarding optimal humeral component version and deltoid tension in reverse total shoulder arthroplasty (TSA). A biomechanical shoulder simulator tested humeral versions (0°, 10°, 20° retroversion) and implant thicknesses (-3, 0, +3 mm from baseline) after reverse TSA in human cadavers. Abduction and external rotation ranges of motion as well as abduction and dislocation forces were quantified for native arms and arms implanted with 9 combinations of humeral version and implant thickness. Resting abduction angles increased significantly (up to 30°) after reverse TSA compared with native shoulders. With constant posterior cuff loads, native arms externally rotated 20°, whereas no external rotation occurred in implanted arms (20° net internal rotation). Humeral version did not affect rotational range of motion but did alter resting abduction. Abduction forces decreased 30% vs native shoulders but did not change when version or implant thickness was altered. Humeral center of rotation was shifted 17 mm medially and 12 mm inferiorly after implantation. The force required for lateral dislocation was 60% less than anterior and was not affected by implant thickness or version. Reverse TSA reduced abduction forces compared with native shoulders and resulted in limited external rotation and abduction ranges of motion. Because abduction force was reduced for all implants, the choice of humeral version and implant thickness should focus on range of motion. Lateral dislocation forces were less than anterior forces; thus, levering and inferior/posterior impingement may be a more probable basis for dislocation (laterally) than anteriorly directed forces. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

21 CFR 888.3660 - Shoulder joint metal/polymer semi-constrained cemented prosthesis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Shoulder joint metal/polymer semi-constrained... Shoulder joint metal/polymer semi-constrained cemented prosthesis. (a) Identification. A shoulder joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a...

21 CFR 888.3650 - Shoulder joint metal/polymer non-constrained cemented prosthesis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Shoulder joint metal/polymer non-constrained... Shoulder joint metal/polymer non-constrained cemented prosthesis. (a) Identification. A shoulder joint metal/polymer non-constrained cemented prosthesis is a device intended to be implanted to replace a...

The effect of glenosphere diameter and eccentricity on deltoid power in reverse shoulder arthroplasty.

PubMed

Scalise, J; Jaczynski, A; Jacofsky, M

2016-02-01

The eccentric glenosphere was principally introduced into reverse shoulder arthroplasty to reduce the incidence of scapular notching. There is only limited information about the influence of its design on deltoid power and joint reaction forces. The aim of our study was to investigate how the diameter and eccentricity of the glenosphere affect the biomechanics of the deltoid and the resultant joint reaction forces. Different sizes of glenosphere and eccentricity were serially tested in ten cadaveric shoulders using a custom shoulder movement simulator. Increasing the diameter of the glenosphere alone did not alter the deltoid moment arm. However, using an eccentric glenosphere increased the moment arm of the deltoid, lowered the joint reaction force and required less deltoid force to generate movement. Eccentricity is an independent variable which increases deltoid efficiency and lowers joint reaction forces in a reverse shoulder arthroplasty. Cite this article: Bone Joint J 2016;98-B:218-23. ©2016 The British Editorial Society of Bone & Joint Surgery.

Latissimus dorsi transfer to restore external rotation with reverse shoulder arthroplasty: a biomechanical study.

PubMed

Favre, Philippe; Loeb, Michael D; Helmy, Naeder; Gerber, Christian

2008-01-01

In patients with pseudoparesis of the shoulder resulting from irreparable rotator cuff tears, reverse shoulder arthroplasty (RSA) can restore active elevation, but external rotation remains less predictable. Latissimus dorsi transfer (LDT) has been shown to be effective in restoring external rotation in patients with posterosuperior tears of the rotator cuff. The aim of this study is to determine the capacity of the LDT to restore external rotation in combination with RSA and to investigate the mechanical advantage produced by 3 different insertion sites. A biomechanical model was created using a reverse total shoulder prosthesis with 3 different transfer insertions. Moment arms were measured for 2 static positions and 1 motion of the humerus. The moment arm analysis showed that LDT can improve active external rotation in the setting of a reverse prosthesis. An insertion site on the posterior side of the greater tuberosity (adjacent to the teres minor insertion) produced a greater external rotation moment arm.

Complications in reverse shoulder arthroplasty

PubMed Central

Barco, Raul; Savvidou, Olga D.; Sperling, John W.; Sanchez-Sotelo, Joaquín; Cofield, Robert H.

2016-01-01

The reported rate of complications of reverse shoulder arthroplasty (RSA) seems to be higher than the complication rate of anatomical total shoulder arthroplasty. The reported overall complication rate of primary RSA is approximately 15%; when RSA is used in the revision setting, the complication rate may approach 40%. The most common complications of RSA include instability, infection, notching, loosening, nerve injury, acromial and scapular spine fractures, intra-operative fractures and component disengagement. Careful attention to implant design and surgical technique, including implantation of components in the correct version and height, selection of the best glenosphere-humeral bearing match, avoidance of impingement, and adequate management of the soft tissues will hopefully translate in a decreasing number of complications in the future. Cite this article: Barco R, Savvidou OD, Sperling JW, Sanchez-Sotelo J, Cofield RH. Complications in reverse shoulder arthroplasty. EFORT Open Rev 2016;1:72-80. DOI: 10.1302/2058-5241.1.160003. PMID:28461931

Complications in reverse shoulder arthroplasty.

PubMed

Barco, Raul; Savvidou, Olga D; Sperling, John W; Sanchez-Sotelo, Joaquín; Cofield, Robert H

2016-03-01

The reported rate of complications of reverse shoulder arthroplasty (RSA) seems to be higher than the complication rate of anatomical total shoulder arthroplasty.The reported overall complication rate of primary RSA is approximately 15%; when RSA is used in the revision setting, the complication rate may approach 40%.The most common complications of RSA include instability, infection, notching, loosening, nerve injury, acromial and scapular spine fractures, intra-operative fractures and component disengagement.Careful attention to implant design and surgical technique, including implantation of components in the correct version and height, selection of the best glenosphere-humeral bearing match, avoidance of impingement, and adequate management of the soft tissues will hopefully translate in a decreasing number of complications in the future. Cite this article: Barco R, Savvidou OD, Sperling JW, Sanchez-Sotelo J, Cofield RH. Complications in reverse shoulder arthroplasty. EFORT Open Rev 2016;1:72-80. DOI: 10.1302/2058-5241.1.160003.

Scapulohumeral rhythm in shoulders with reverse shoulder arthroplasty.

PubMed

Walker, David; Matsuki, Keisuke; Struk, Aimee M; Wright, Thomas W; Banks, Scott A

2015-07-01

Little is known about kinematic function of reverse total shoulder arthroplasty (RTSA). Scapulohumeral rhythm (SHR) is a common metric for assessing muscle function and shoulder joint motion. The purpose of this study was to compare SHR in shoulders with RTSA to normal shoulders. Twenty-eight subjects, more than 12 months after unilateral RTSA, were recruited for an Institutional Review Board-approved study. Subjects performed arm abduction in the coronal plane with and without a 1.4-kg hand-held weight. Three-dimensional model-image registration techniques were used to measure orientation and position for the humerus and scapula from fluoroscopic images. Analysis of variance and Tukey tests were used to assess groupwise and pairwise differences. SHR in RTSA shoulders (1.3:1) was significantly lower than in normal shoulders (3:1). Below 30° abduction, RTSA and normal shoulders show a wide range of SHR (1.3:1 to 17:1). Above 30° abduction, SHR in RTSA shoulders was 1.3:1 for unweighted abduction and 1.3:1 for weighted abduction. Maximum RTSA shoulder abduction in weighted trials was lower than in unweighted trials. SHR variability in RTSA shoulders decreased with increasing arm elevation. RTSA shoulders show kinematics that are significantly different from normal shoulders. SHR in RTSA shoulders was significantly lower than in normal shoulders, indicating that RTSA shoulders use more scapulothoracic motion and less glenohumeral motion to elevate the arm. With these observations, it may be possible to improve rehabilitation protocols, with particular attention to the periscapular muscles, and implant design or placement to optimize functional outcomes in shoulders with RTSA. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Reverse Shoulder Arthroplasty for the Treatment of 3 and 4- Part Fractures of the Humeral Head in the Elderly

PubMed Central

Gigis, Ioannis; Nenopoulos, Alexandros; Giannekas, Dimitrios; Heikenfeld, Roderich; Beslikas, Theodoros; Hatzokos, Ippokratis

2017-01-01

Background: Proximal humeral fractures in elderly patients present with severe comminution and osteoporotic bone quality. Reverse shoulder arthroplasty has lately been proven beneficial in treating patients with complex proximal humeral fractures. The above technique is recommended and has better results in elderly than in younger individuals. Methods: We performed a literature search in the databases Pubmed, Medline, EMBASE and Cochrane Library for published articles between 1970 and 2016 using the terms: proximal humerus fractures and reverse shoulder arthroplasty. Results: Significant benefits with the use of reverse prosthesis, especially in patients older than 70 years with a proximal humeral fracture, include reduced rehabilitation time as well as conservation of a fixed fulcrum for deltoid action in case of rotator cuff failure. Compared with hemiarthroplasty and internal fixation, reverse prosthesis may be particularly useful and give superior outcomes in older patients, due to comminuted fractures in osteopenic bones. However, significant disadvantages of this technique are potential complications and a demanding learning curve.Therefore, trained surgeons should follow specific indications when applying the particular treatment of proximal humeral fractures and be familiar with the surgical technique. Conclusion: Although long-term results and randomized studies for reverse prosthesis are lacking, short and mid- term outcomes have given promising results encouraging more shoulder surgeons to use this type of prosthesis in proximal humeral fractures. PMID:28400879

Humeral component retroversion in reverse total shoulder arthroplasty: a biomechanical study.

PubMed

Gulotta, Lawrence V; Choi, Dan; Marinello, Patrick; Knutson, Zakary; Lipman, Joseph; Wright, Timothy; Cordasco, Frank A; Craig, Edward V; Warren, Russell F

2012-09-01

Reverse total shoulder arthroplasty offers pain relief and functional improvement for patients with rotator cuff-deficient shoulders. The purpose of this study was to determine the optimal amount of humeral retroversion for this prosthesis. Six cadaveric shoulders underwent computed tomography (CT) imaging and were then dissected of soft tissues, except for their tendinous attachments. A reverse total shoulder arthroplasty was implanted in 0°, 20°, 30°, and 40° of retroversion, and the shoulders were mounted on a simulator to determine the muscle forces required to achieve 30° and 60° of scaption. CT images were converted into 3-dimensional models, and the amount of internal and external rotation was determined with computer modeling at various scaption angles. No differences were found in the forces required for 30° or 60° of scaption for any muscle, at any retroversion. With increasing retroversion, more impingement-free external rotation was obtained, with a concomitant decrease in the amount of internal rotation. Above 60°, the humerus was allowed to rotate around the glenosphere unencumbered. Increasing retroversion did not affect the muscle force requirements for scaption across the shoulder. Placing the humeral component in 0° to 20° of retroversion allows maximum internal rotation with the arm at the side, a movement that is required for daily activities. This limits external rotation with the arm at the side, but has no effect on external rotation with the arm elevated. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

[Treatment of proximal humeral fractures by reverse shoulder arthroplasty: mid-term evaluation of functional results and Notching].

PubMed

Hernández-Elena, J; de la Red-Gallego, M Á; Garcés-Zarzalejo, C; Pascual-Carra, M A; Pérez-Aguilar, M D; Rodríguez-López, T; Alfonso-Fernández, A; Pérez-Núñez, M I

2015-01-01

An analysis was made on relationship between Notching and functional and radiographic parameters after treatment of acute proximal humeral fractures with reverse total shoulder arthroplasty. A retrospective evaluation was performed on 37 patients with acute proximal humeral fracture treated by reversed shoulder arthroplasty. The mean follow-up was 24 months. Range of motion, intraoperative and postoperative complications were recorded. Nerot's classification was used to evaluate Notching. Patient satisfaction was evaluated with the Constant Score (CS). Statistical analysis was performed to evaluate the relationship between Notching and glenosphere position, or functional outcomes. Mean range of elevation, abduction, external and internal rotation were 106.22°, 104.46°, 46.08° and 40.27°, respectively. Mean CS was 63. Notching was present at 12 months in 29% of patients. Statistical analysis showed significance differences between age and CS, age and notching development, and tilt with notching. No statistical significance differences were found between elevation, abduction, internal and external rotation and CS either with scapular or glenosphere-neck angle. Reverse shoulder arthroplasty is a valuable option for acute humeral fractures in patients with osteoporosis and cuff-tear arthropathy. It leads to early pain relief and shoulder motion. Nevertheless, it is not exempt from complications, and long-term studies are needed to determine the importance of notching. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

Nerve stress during reverse total shoulder arthroplasty: a cadaveric study.

PubMed

Lenoir, Hubert; Dagneaux, Louis; Canovas, François; Waitzenegger, Thomas; Pham, Thuy Trang; Chammas, Michel

2017-02-01

Neurologic lesions are relatively common after total shoulder arthroplasty. These injuries are mostly due to traction. We aimed to identify the arm manipulations and steps during reverse total shoulder arthroplasty (RTSA) that affect nerve stress. Stress was measured in 10 shoulders of 5 cadavers by use of a tensiometer on each nerve from the brachial plexus, with shoulders in different arm positions and during different surgical steps of RTSA. When we studied shoulder position without prostheses, relative to the neutral position, internal rotation increased stress on the radial and axillary nerves and external rotation increased stress on the musculocutaneous, median, and ulnar nerves. Extension was correlated with increase in stress on all nerves. Abduction was correlated with increase in stress for the radial nerve. We identified 2 high-risk steps during RTSA: humeral exposition, particularly when the shoulder was in a position of more extension, and glenoid exposition. The thickness of polyethylene humeral cups used was associated with increased nerve stress in all but the ulnar nerve. During humeral preparation, the surgeon must be careful to limit shoulder extension. Care must be taken during exposure of the glenoid. Extreme rotation and oversized implants should be avoided to minimize stretch-induced neuropathies. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Obesity Has Minimal Impact on Short-Term Functional Scores After Reverse Shoulder Arthroplasty for Rotator Cuff Tear Arthropathy.

PubMed

Morris, Brent J; Haigler, Richard E; Cochran, John M; Laughlin, Mitzi S; Elkousy, Hussein A; Gartsman, Gary M; Edwards, T Bradley

2016-01-01

The potential adverse effect of body mass index (BMI) on shoulder function scores after reverse shoulder arthroplasty (RSA) has not been investigated. We conducted a study to examine outcomes of RSA performed for rotator cuff tear arthropathy (RCTA) across BMI categories (normal weight, overweight, obese). We hypothesized that, compared with normal-weight patients, obese patients would have worse shoulder function scores, worse mobility, and more complications. Using a prospective shoulder arthroplasty registry, we identified 77 primary RSAs performed for RCTA with minimum 2-year follow-up. Thirty-four patients had normal weight (BMI <25 kg/m2), 21 were overweight (BMI 25-30 kg/m2), and 22 were obese (BMI >30 kg/m2). Shoulder function scores, mobility, and satisfaction were evaluated before surgery and at final follow-up. The 3 BMI groups were not significantly different on demographic factors, preoperative shoulder function scores, or preoperative mobility (P > .05). For each group, shoulder function scores and mobility significantly improved between the preoperative and final follow-up assessments (P < .001). Patient satisfaction was similar between groups (P = .967). Improved shoulder function scores, mobility, and patient satisfaction can be expected after RSA for RCTA in patients regardless of BMI.

Kinematic analysis of dynamic shoulder motion in patients with reverse total shoulder arthroplasty.

PubMed

Kwon, Young W; Pinto, Vivek J; Yoon, Jangwhon; Frankle, Mark A; Dunning, Page E; Sheikhzadeh, Ali

2012-09-01

Reverse total shoulder arthroplasty (rTSA) has been used to treat patients with irreparable rotator cuff dysfunction. Despite the proven clinical efficacy, there is minimal information regarding the underlying changes to the shoulder kinematics associated with this construct. Therefore, we sought to examine the kinematics of dynamic shoulder motion in patients with well-functioning rTSA. We tested 12 healthy subjects and 17 patients with rTSA. All rTSA patients were able to elevate their arms to at least 90° and received the implant as the primary arthroplasty at least 6 months before testing. On average, the rTSA patients elevated their arms to 112° ± 12° (mean ± SD) and reported an American Shoulder and Elbow Surgeons outcome score of 90.6 ± 6.3. A 3-dimensional electromagnetic motion capture device was used to detect the dynamic motion of the trunk, scapula, and humerus during bilateral active shoulder elevation along the sagittal, scapular, and coronal planes. In both healthy and rTSA shoulders, the majority of the humeral-thoracic motion was provided by the glenohumeral motion. Therefore, the ratio of glenohumeral to scapulothoracic (ST) motion was always greater than 1.62 during elevation along the scapular plane. In comparison to healthy subjects, however, the contribution of ST motion to overall shoulder motion was significantly increased in the rTSA shoulders. This increased contribution was noted in all planes of shoulder elevation and was maintained when weights were attached to the arm. Kinematics of the rTSA shoulders are significantly altered, and more ST motion is used to achieve shoulder elevation. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Outcomes of an anatomic total shoulder arthroplasty with a contralateral reverse total shoulder arthroplasty.

PubMed

Cox, Ryan M; Padegimas, Eric M; Abboud, Joseph A; Getz, Charles L; Lazarus, Mark D; Ramsey, Matthew L; Williams, Gerald R; Horneff, John G

2018-06-01

It is common for patients to require staged bilateral shoulder arthroplasties. There is a unique cohort of patients who require an anatomic total shoulder arthroplasty (TSA) and a contralateral reverse shoulder arthroplasty (RSA). This study compared the outcomes of patients with a TSA in 1 shoulder and an RSA in the contralateral shoulder. Our institutional database was queried to identify all patients with a TSA and a contralateral RSA. Data collection included patient demographics, preoperative and latest follow-up shoulder range of motion, radiographic analysis, and postoperative complications. Identified patients were assessed at follow-up visits or contacted by phone for functional outcome scores. Nineteen patients met our inclusion/exclusion criteria. There was statistically significant greater internal rotation in the TSA shoulder (P= .044) but no significant difference in forward elevation (P = .573) or external rotation (P= .368). There was no radiographic evidence of humeral or glenoid component loosening of any arthroplasty implants. There were no significant differences between TSA and RSA shoulders for the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment (P= .381), Simple Shoulder Test (P = .352), Single Assessment Numerical Evaluation (P = .709), and visual analog scale satisfaction (P= .448) or pain scores (P= .305). Thirteen patients (68.4%) preferred the RSA side, 1 patient (5.3%; z = 4.04, P < .001) patient preferred the TSA side, and 5 patients expressed no preference. Despite known limitations and differences between TSA and RSA designs, patients who have received both implants are highly satisfied with both. The only parameter in which the TSA had superior outcomes was internal rotation. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

How sensitive is the deltoid moment arm to humeral offset changes with reverse total shoulder arthroplasty?

PubMed

Walker, David R; Kinney, Allison L; Wright, Thomas W; Banks, Scott A

2016-06-01

Reverse total shoulder arthroplasty commonly treats cuff-deficient or osteoarthritic shoulders not amenable to rotator cuff repair. This study investigates deltoid moment arm sensitivity to variations in the joint center and humeral offset of 3 representative reverse total shoulder arthroplasty subjects. We hypothesized that a superior joint implant placement may exist, indicated by muscle moment arms, compared with the current actual surgical implant configuration. Moment arms for the anterior, lateral, and posterior aspects of the deltoid muscle were determined for 1521 perturbations of the humeral offset location away from the surgical placement in a subject-specific musculoskeletal model with motion defined by subject-specific in vivo abduction kinematics. The humeral offset was varied from its surgical position ±4 mm in the anterior/posterior direction, ±12 mm in the medial/lateral direction, and -10 to 14 mm in the superior/inferior direction. The anterior deltoid moment arm varied in humeral offset and center of rotation up to 20 mm, primarily in the medial/lateral and superior/inferior directions. The lateral deltoid moment arm varied in humeral offset up to 20 mm, primarily in the medial/lateral and anterior/posterior directions. The posterior deltoid moment arm varied up to 15 mm, primarily in early abduction, and was most sensitive to humeral offset changes in the superior/inferior direction. High variations in muscle moment arms were found for all 3 deltoid components, presenting an opportunity to dramatically change the deltoid moment arms through surgical placement of the reverse shoulder components and by varying the overall offset of the humerus. Basic Science Study; Computer Modeling. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Three-Dimensional Scapular Kinematics in Patients with Reverse Total Shoulder Arthroplasty during Arm Motion.

PubMed

Lee, Kwang Won; Kim, Yong In; Kim, Ha Yong; Yang, Dae Suk; Lee, Gyu Sang; Choy, Won Sik

2016-09-01

There have been few reports on altered kinematics of the shoulder after reverse total shoulder arthroplasty (RTSA). We investigated differences in 3-dimensional (3D) scapular motions assessed using an optical tracking system between RTSA treated shoulders and asymptomatic contralateral shoulders during arm motion. Thirteen patients who underwent RTSA were assessed for active arm elevation in 2 distinct elevation planes (sagittal plane flexion and scapular plane abduction). Their mean age was 72 years (range, 69 to 79 years) and the mean follow-up was 24.4 months (range, 13 to 48 months). The dominant side was the right side in all the 13 patients, and it was also the side treated with RTSA. Scapular kinematics was recorded with an optical tracking system. The scapular kinematics and the scapulohumeral rhythm (SHR) of the RTSA shoulders and asymptomatic contralateral shoulders were recorded and analyzed during arm elevation. There were no significant differences in internal/external rotation and anterior/posterior tilting of the scapula between shoulders during arm motion (p > 0.05). However, upward rotation of the scapula differed significantly during arm motion (p = 0.035 for sagittal plane flexion; p = 0.046 for scapular plane abduction). There were significant differences in the SHR between the two shoulders (p = 0.016 for sagittal plane flexion; p = 0.021 for scapular plane abduction). The shoulder kinematics after RTSA showed significant differences from the contralateral asymptomatic shoulders. Increased upward rotation and decreased SHR after RTSA indicate that RTSA shoulders use more scapulothoracic motion and less glenohumeral motion to elevate the arm.

Three-Dimensional Scapular Kinematics in Patients with Reverse Total Shoulder Arthroplasty during Arm Motion

PubMed Central

Lee, Kwang Won; Kim, Ha Yong; Yang, Dae Suk; Lee, Gyu Sang; Choy, Won Sik

2016-01-01

Background There have been few reports on altered kinematics of the shoulder after reverse total shoulder arthroplasty (RTSA). We investigated differences in 3-dimensional (3D) scapular motions assessed using an optical tracking system between RTSA treated shoulders and asymptomatic contralateral shoulders during arm motion. Methods Thirteen patients who underwent RTSA were assessed for active arm elevation in 2 distinct elevation planes (sagittal plane flexion and scapular plane abduction). Their mean age was 72 years (range, 69 to 79 years) and the mean follow-up was 24.4 months (range, 13 to 48 months). The dominant side was the right side in all the 13 patients, and it was also the side treated with RTSA. Scapular kinematics was recorded with an optical tracking system. The scapular kinematics and the scapulohumeral rhythm (SHR) of the RTSA shoulders and asymptomatic contralateral shoulders were recorded and analyzed during arm elevation. Results There were no significant differences in internal/external rotation and anterior/posterior tilting of the scapula between shoulders during arm motion (p > 0.05). However, upward rotation of the scapula differed significantly during arm motion (p = 0.035 for sagittal plane flexion; p = 0.046 for scapular plane abduction). There were significant differences in the SHR between the two shoulders (p = 0.016 for sagittal plane flexion; p = 0.021 for scapular plane abduction). Conclusions The shoulder kinematics after RTSA showed significant differences from the contralateral asymptomatic shoulders. Increased upward rotation and decreased SHR after RTSA indicate that RTSA shoulders use more scapulothoracic motion and less glenohumeral motion to elevate the arm. PMID:27583116

Achieving fixation in glenoids with superior wear using reverse shoulder arthroplasty.

PubMed

Roche, Christopher P; Stroud, Nicholas J; Martin, Brian L; Steiler, Cindy A; Flurin, Pierre-Henri; Wright, Thomas W; Zuckerman, Joseph D; Dipaola, Matthew J

2013-12-01

Superior glenoid wear is a common challenge with reverse shoulder arthroplasty and, if left uncorrected, can result in superior glenoid tilt, which increases the risk of aseptic glenoid loosening. This study evaluates the impact of an E2 superior defect on reverse shoulder glenoid fixation in composite scapulae after correction of glenoid tilt by use of 2 different glenoid reaming techniques: eccentric reaming and off-axis reaming. A superior glenoid defect was created in 14 composite scapulae. The superior defect was corrected by 2 different glenoid reaming techniques: (1) eccentric reaming with implantation of a standard glenoid baseplate and (2) off-axis reaming with implantation of a superior-augment glenoid baseplate. Each corrected superior-defect scapula was then cyclically loaded (along with a control group consisting of 7 non-worn scapulae) for 10,000 cycles at 750 N; glenoid baseplate displacement was measured for each group to quantify fixation before and after cyclic loading. Regardless of the glenoid reaming technique or the glenoid baseplate type, each standard and superior-augment glenoid baseplate remained well fixed in this superior-defect model scenario after cyclic loading. No differences in baseplate displacement were observed either before or after cyclic loading between groups. Our results suggest that either glenoid reaming technique may be used to achieve fixation in the clinically challenging situation of superior wear with reverse shoulder arthroplasty. Basic science, biomechanical study. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Reverse total shoulder arthroplasty for acute head-splitting, 3- and 4-part fractures of the proximal humerus in the elderly.

PubMed

Grubhofer, Florian; Wieser, Karl; Meyer, Dominik C; Catanzaro, Sabrina; Beeler, Silvan; Riede, Ulf; Gerber, Christian

2016-10-01

Anatomic reduction and stable internal fixation of complex proximal humeral fractures in the elderly is challenging. Secondary displacement, screw perforation, and humeral head necrosis are common complications. The outcome of hemiarthroplasty is unpredictable and strongly dependent on the uncertain healing of the greater tuberosity. This multicenter study retrospectively analyzes the midterm results of primary reverse total shoulder arthroplasty for the treatment of acute, complex fractures of the humerus in an elderly population. Fifty-two shoulders in 51 patients with a mean age of 77 years treated with reverse total shoulder arthroplasty for an acute, complex fracture of the proximal humerus were clinically and radiographically analyzed after a mean follow-up period of 35 months (range, 12-90 months). There were no intraoperative complications. Revision surgery was performed in 4 shoulders. At final follow-up, the absolute and relative Constant scores averaged 62 points (range, 21-83 points) and 86% (range, 30%-100%), respectively, with a mean Subjective Shoulder Value of 83% (range, 30%-100%). Of the patients, 92% rated the treatment outcome as excellent or good. Patients with a resected or secondarily displaced greater tuberosity had an inferior clinical outcome to those with a healed greater tuberosity. The midterm clinical results are predictably good, with low complication rates and a rapid postoperative recovery of painfree everyday function. If secondary displacement of the greater tuberosity occurs, revision surgery may warrant consideration in view of potential improvement of ultimate outcome. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Functional outcomes after shoulder resection: the patient's perspective.

PubMed

Stevens, Nicole M; Kim, H Mike; Armstrong, April D

2015-09-01

Resection arthroplasty is a salvage procedure used for the treatment of deep-seated infections after total shoulder arthroplasty, hemiarthroplasty, and reverse total shoulder arthroplasty. Previous studies have reported a 50% to 66% rate of pain relief after resection arthroplasty but with significant functional limitations. Our study aimed to qualify the perspective of the patients on their limitations and satisfaction with resection arthroplasty. A retrospective record review of resection arthroplasties performed between September 2003 and December 2012 yielded 14 patients, and 7 completed the survey. The patients completed surveys with the focus on the "patient perspective." Functional scores, including American Shoulder and Elbow Surgeons, Simple Shoulder Test, Disabilities of the Arm, Shoulder, and Hand (DASH), DASH work, and DASH sports, were determined. Pain reduction and functional outcomes were similar to past reports of resection arthroplasty. Five of the 7 patients (71%) reported satisfaction with their resection arthroplasty, and 6 of the 7 patients (86%) would undergo the procedure again if given the choice. Five of the 7 patients (71%) were able to most of activities of daily living. Patients in our study were generally satisfied with their resection arthroplasty. Resection arthroplasty is a reasonable option for treatment of deep-seated periprosthetic infections or for patients with multiple previous failed procedures for total shoulder arthroplasty, hemiarthroplasty. and reverse shoulder arthroplasty. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Using your shoulder after replacement surgery

MedlinePlus

... on the top of the stem. A plastic piece is used as the new surface of the shoulder blade. Now that you are home you will need to know how to protect your shoulder as it heals. What to Expect at Home You will need to wear a sling for the first 6 weeks after surgery. You may want to wear ...

Failed Reverse Total Shoulder Arthroplasty Caused by Recurrent Candida glabrata Infection with Prior Serratia marcescens Coinfection

PubMed Central

Skedros, John G.; Keenan, Kendra E.; Updike, Wanda S.; Oliver, Marquam R.

2014-01-01

This report describes a 58-year-old insulin-dependent diabetic male patient who initially sustained a proximal humerus fracture from a fall. The fracture fixation failed and then was converted to a humeral hemiarthroplasty, which became infected with Candida glabrata and Serratia marcescens. After these infections were believed to be cured with antibacterial and antifungal treatments and two-stage irrigation and debridement, he underwent conversion to a reverse total shoulder arthroplasty. Unfortunately, the C. glabrata infection recurred and, nearly 1.5 years after implantation of the reverse total shoulder, he had a resection arthroplasty (removal of all implants and cement). His surgical and pharmacologic treatment concluded with (1) placement of a tobramycin-impregnated cement spacer also loaded with amphotericin B, with no plan for revision arthroplasty (i.e., the spacer was chronically retained), and (2) chronic use of daily oral fluconazole. We located only three reported cases of Candida species causing infection in shoulder arthroplasties (two C. albicans, one C. parapsilosis). To our knowledge, a total shoulder arthroplasty infected with C. glabrata has not been reported, nor has a case of a C. glabrata and S. marcescens periprosthetic coinfection in any joint. In addition, it is well known that S. marcescens infections are uncommon in periprosthetic joint infections. PMID:25431708

Reverse shoulder arthroplasty for massive irreparable rotator cuff tears and cuff tear arthropathy: a systematic review.

PubMed

Petrillo, S; Longo, U G; Papalia, R; Denaro, V

2017-08-01

To report the outcomes and complications of reverse shoulder arthroplasty (RSA) in massive irreparable rotator cuff tears (MIRCT) and cuff tear arthropathy (CTA). A systematic review of the literature contained in Medline, Cochrane, EMBASE, Google Scholar and Ovid databases was conducted on May 1, 2016, according to PRISMA guidelines. The key words "reverse total shoulder arthroplasty" or "reverse total shoulder prostheses" with "rotator cuff tears"; "failed rotator cuff surgery"; "massive rotator cuff tears"; "irreparable rotator cuff tears"; "cuff tear arthropathy"; "outcomes"; "complications" were matched. All articles reporting outcomes and complications of RSA for the management of MIRCT or CTA were included. The comparison between preoperative and postoperative clinical scores, as well as range of motion (ROM), was performed using the Wilcoxon-Mann-Whitney test. P values lower than 0.05 were considered statistically significant. Seven articles were included in our qualitative synthesis. A statistically significant improvement in all clinical scores and ROM was found comparing the preoperative value with the postoperative value. The degrees of retroversion of the humeral stem of the RSA do not influence the functional outcomes in a statistically significant fashion. There were 17.4% of complications. The most frequent was heterotopic ossification, occurring in 6.6% of patients. Revision surgery was necessary in 7.3% of patients. RSA restores pain-free ROM and improves function of the shoulder in patients with MIRCT or CTA. However, complications occur in a high percentage of patients. The lack of level I studies limits the real understanding of the potentials and limitations of RSA for the management of MIRCT and CTA.

Revision shoulder arthroplasty from resurfacing to non-cemented short-stem reverse prosthesis.

PubMed

Natera, L; Bruguera, J; Atoun, E; Levy, O

2016-01-01

To assess the surgical parameters and the clinical and radiological outcomes of revisions of resurfacing shoulder arthroplasty to non-cemented short-stem reverse total shoulder arthroplasty. A total of 23 revisions from resurfacing shoulder arthroplasty to reverse total shoulder arthroplasty were performed. The mean age was 70.3±11.95 years. The patients included 82.6% (19/23) revised for cuff failure; 13.04% (3/23) cuff failure and aseptic loosening, and 4.35% (1/23) peri-prosthetic fracture. The need for humeral osteotomy or structural allograft, operation length, blood loss, blood transfusions and intraoperative fractures were recorded. Minimum follow-up 25 months. No humeral osteotomy or humeral structural allograft was required, and 2/23 (8.69%) required allograft for glenoid reconstruction. The mean operation time was 113.35±21.30minutes. Intra-operative blood loss was 374±245.09 mls. Blood transfusion was required in one case. Intra-operative fracture occurred in 1 case. The Constant score improved from 17.32 to 59.78 (age/sex adjusted, 84). Overall satisfaction improved from 1.37 to 8.04. The range of motion increased 79.57° in forward elevation; 72.88° in abduction; 38.06° in internal rotation; and 13.57° in external rotation. There was no evidence of radiolucency, subsidence, or bone resorption. Revisions of resurfacing implants to non-cemented short-stem reverse prosthesis show good clinical and radiological outcomes, with minimal intra-operative complexities. IV, case series. Copyright © 2016 SECOT. Published by Elsevier Espana. All rights reserved.

Biomechanical comparison of component position and hardware failure in the reverse shoulder prosthesis.

PubMed

Gutiérrez, Sergio; Greiwe, R Michael; Frankle, Mark A; Siegal, Steven; Lee, William E

2007-01-01

There has been renewed interest in reverse shoulder arthroplasty for the treatment of glenohumeral arthritis with concomitant rotator cuff deficiency. Failure of the prosthesis at the glenoid attachment site remains a concern. The purpose of this study was to examine glenoid component stability with regard to the angle of implantation. This investigation entailed a biomechanical analysis to evaluate forces and micromotion in glenoid components attached to 12 polyurethane blocks at -15 degrees, 0 degrees, and +15 degrees of superior and inferior tilt. The 15 degrees inferior tilt had the most uniform compressive forces and the least amount of tensile forces and micromotion when compared with the 0 degrees and 15 degrees superiorly tilted baseplate. Our results suggest that implantation with an inferior tilt will reduce the incidence of mechanical failure of the glenoid component in a reverse shoulder prosthesis.

Reverse shoulder prosthesis in the treatment of locked anterior shoulders: a comparison with classic reverse shoulder indications.

PubMed

Kurowicki, Jennifer; Triplet, Jacob J; Momoh, Enesi; Moor, Molly A; Levy, Jonathan C

2016-12-01

Locked anterior shoulder (LAS) with static instability and anterior glenoid bone loss is challenging in the elderly population. Reverse shoulder arthroplasty (RSA) has been employed in treating these patients. No study has compared RSA for LAS with classically indicated RSA. A retrospective case-control study of patients treated with RSA for LAS with glenoid bone loss and static instability was performed using matched controls treated with primary RSA for classic indications. Twenty-four cases and 48 controls were evaluated. Average follow-up was 25.5 months, and median age was 76 years. Motion, outcome assessments, and postoperative radiographs were compared. Preoperatively, LAS had significantly less rotation and lower baseline outcome scores. Glenoid bone grafting was more common (P = .05) in the control group (26%) than in the LAS group (6.3%). Larger glenospheres were used more often (P = .001) in the LAS group (75%) than in the control group (29%). Both groups demonstrated significant improvements in pain, function, and outcome scores. Postoperatively, the control group had significantly better elevation and functional outcome scores. With the exception of flexion and Simple Shoulder Test score, effectiveness of treatment was similar between groups. Postoperative acromion stress fractures were seen in 21% of LAS patients and 9% of controls (P = .023) with a predominance of type 3 fractures in LAS. Two LAS patients remained dislocated. Patients with LAS treated with RSA can anticipate improvements in pain and function by use of larger glenospheres, often without the need for glenoid bone grafting. Worse postoperative motion and function and a higher incidence of acromion stress fracture may be expected. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Accuracy of patient-specific guided glenoid baseplate positioning for reverse shoulder arthroplasty.

PubMed

Levy, Jonathan C; Everding, Nathan G; Frankle, Mark A; Keppler, Louis J

2014-10-01

The accuracy of reproducing a surgical plan during shoulder arthroplasty is improved by computer assistance. Intraoperative navigation, however, is challenged by increased surgical time and additional technically difficult steps. Patient-matched instrumentation has the potential to reproduce a similar degree of accuracy without the need for additional surgical steps. The purpose of this study was to examine the accuracy of patient-specific planning and a patient-specific drill guide for glenoid baseplate placement in reverse shoulder arthroplasty. A patient-specific glenoid baseplate drill guide for reverse shoulder arthroplasty was produced for 14 cadaveric shoulders based on a plan developed by a virtual preoperative 3-dimensional planning system using thin-cut computed tomography images. Using this patient-specific guide, high-volume shoulder surgeons exposed the glenoid through a deltopectoral approach and drilled the bicortical pathway defined by the guide. The trajectory of the drill path was compared with the virtual preoperative planned position using similar thin-cut computed tomography images to define accuracy. The drill pathway defined by the patient-matched guide was found to be highly accurate when compared with the preoperative surgical plan. The translational accuracy was 1.2 ± 0.7 mm. The accuracy of inferior tilt was 1.2° ± 1.2°. The accuracy of glenoid version was 2.6° ± 1.7°. The use of patient-specific glenoid baseplate guides is highly accurate in reproducing a virtual 3-dimensional preoperative plan. This technique delivers the accuracy observed using computerized navigation without any additional surgical steps or technical challenges. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Reverse Shoulder Arthroplasty Prosthesis Design Classification System.

PubMed

Routman, Howard D; Flurin, Pierre-Henri; Wright, Thomas W; Zuckerman, Joseph D; Hamilton, Matthew A; Roche, Christopher P

2015-12-01

Multiple different reverse total shoulder arthroplasty (rTSA) prosthesis designs are available in the global marketplace for surgeons to perform this growing procedure. Subtle differences in rTSA prosthesis design parameters have been shown to have significant biomechanical impact and clinical consequences. We propose an rTSA prosthesis design classification system to objectively identify and categorize different designs based upon their specific glenoid and humeral prosthetic characteristics for the purpose of standardizing nomenclature that will help the orthopaedic surgeon determine which combination of design configurations best suit a given clinical scenario. The impact of each prosthesis classification type on shoulder muscle length and deltoid wrapping are also described to illustrate how each prosthesis classification type impacts these biomechanical parameters.

Effect of total shoulder replacements on airport security screening in the post-9/11 era.

PubMed

Dines, Joshua S; Elkousy, Hussein; Edwards, T Bradley; Gartsman, Gary M; Dines, David M

2007-01-01

There are few reports in the literature on the effect of orthopaedic implants on airport security devices and none on shoulder arthroplasty implants after September 11, 2001. Since 9/11, airport security screening devices have become more sensitive in response to the increasing threat of terrorism. Often, patients with joint implants activate the metal detectors and are subsequently subjected to more intensive screening. We assess the effects of shoulder joint implants on different airport security devices and what effect the results had on passenger travel. In this study, 154 patients who had previously undergone shoulder replacement responded to a questionnaire regarding their travel experiences after 9/11. Of these, 85 had flown during the time period studied (47 men and 38 women; mean age, 67.8 years); 79 had traveled domestically (mean, 7 flights), and 22 had taken international flights (mean, 6.1 flights). The questionnaire addressed each patient's height/weight, the number of flight segments flown (domestic and international), the number of times that a patient activated the doorway alarm/wand alarm, and the effect of a card stating that the patient had joint replacement (when applicable). On average, patients with shoulder replacement traveling domestically activated the security gate 52% of the time. The average for international travel was 42%. Of the patients who flew both domestically and internationally, there was a high correlation of activation (R = 0.54). Twenty-six patients had multiple joint implants (mean, 2.8). Multiple joint implants caused increased alarm activation (P < .001). All patients reported that their travel was delayed during the instances of security activation. There was no statistically significant effect of body mass index, height, weight, age, or sex on security device activation. Of the patients, 71% were told by their doctor that the shoulder replacement may activate security devices. Of these, 46 were given a card by their doctor indicating the presence of a total joint implant. In only 30% of the security encounters of these patients did the card expedite the screening process. This is the largest study on the effects of joint implants, and shoulder implants in particular, on airport security devices and the only one that has analyzed the data of post-9/11 travel. Patients traveling after total shoulder replacement are often delayed and subjected to more rigorous screening when traveling, especially in the post-9/11 environment. Doctors often warn their patients of potential problems and may try to avert this by giving them cards documenting the presence of a joint implant. The acceptance of these cards is sporadic. This study raises the importance of notifying patients of potential security delays, especially those with multiple joint implants, as they may directly affect travel plans. In addition, these patients may benefit from the establishment of an international joint registry.

Sonographic assessment of the subscapularis after reverse shoulder arthroplasty: impact of tendon integrity on shoulder function.

PubMed

Dedy, Nicolas J; Gouk, Conor J; Taylor, Fraser J; Thomas, Michael; Tan, S L Ezekiel

2018-06-01

The deltopectoral approach for reverse shoulder arthroplasty (RSA) requires subscapularis tenotomy or lesser tuberosity osteotomy. Whether the subscapularis should be repaired at the conclusion of the procedure remains controversial. The present study sonographically assessed the subscapularis after RSA and evaluated the effect of tendon integrity on functional outcome. All patients who had undergone RSA in the Gold Coast University Hospital between 2005 and 2016 were included. Sonography was performed by a blinded examiner. Function was assessed using the Disabilities of the Arm, Shoulder and Hand, the Constant-Murley, and Oxford Shoulder scores. Internal rotation ability was recorded on a 6-point scale. The study included 43 patients (48 shoulders). Median length of follow-up was 19 months (range, 4-132 months). On sonography, the subscapularis was graded intact in 6 shoulders (13%), intact with mild attenuation in 16 (33%), severely attenuated in 15 (31%), and not intact or absent in 11 (23%). Differences in Disabilities of the Arm, Shoulder and Hand, Constant-Murley, or Oxford Shoulder scores between intact and attenuated or absent subscapularis shoulders were not significant. Internal rotation scores were significantly higher in the intact and mildly attenuated tendon group than in the absent tendon group (U = 1.0, P = .001 and U = 28.5, P = .007, respectively). The present work is the first long-term outcome study of RSA using sonography to assess the subscapularis. Subscapularis integrity did not appear to have a measurable effect on patient outcome as measured by standard scores but was important for internal rotation ability after RSA. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. All rights reserved.

3D navigated implantation of the glenoid component in reversed shoulder arthroplasty. Feasibility and results in an anatomic study.

PubMed

Stübig, Timo; Petri, Maximilian; Zeckey, Christian; Hawi, Nael; Krettek, Christian; Citak, Musa; Meller, Rupert

2013-12-01

Reversed shoulder arthroplasty is an alternative to total shoulder arthroplasty for various indications. The long-term results depend on stable bone fixation, and correct positioning of the glenoid component. The potential contribution of image guidance for reversed shoulder arthroplasty procedures was tested in vitro. 27 positioning procedures (15 navigated, 12 non-navigated) of the glenoid baseplate in reverse shoulder arthroplasty were performed by a single experienced orthopaedic surgeon. A Kirschner wire was placed freehand or with the use of a navigated drill guide. For the navigated procedures, a flat detector 3D C-arm with navigation system was used. The Kirschner wire was to be inserted 12 mm from the inferior glenoid, with an inferior tilt of 10° and centrally in the axial scapular axis. The insertion point in the glenoid as well as the position of the K-wire in the axial and sagittal planes were measured. For statistical analysis, t-tests were performed with a significance level of 0.05. The inferior glenoid drilling distance was 14.1 ± 3.4 mm for conventional placement and 15.1 ± 3.4 mm for the navigated procedure (P = 0.19). The inferior tilt showed no significant difference between the two methods (conventional 7.4 ± 5.2°, navigated 7.7 ± 4.9°, P = 0.63). The glenoid version in the axial plane showed significantly higher accuracy for the navigated procedure, with a mean deviation of 1.6 ±4.5° for the navigated procedure compared with 11.5 ± 6.5° for the conventional procedure(P = 0.004). Accurate positioning of the glenoidal baseplate in the axial scapular plane can be improved using 3D C-arm navigation for reversed shoulder arthroplasty. However, computer navigation may not improve the inferior tilt of the component or the position in the inferior glenoid to avoid scapular notching. Nevertheless, further studies are required to confirm these findings in the clinical setup. Copyright © 2013 John Wiley & Sons, Ltd.

Reverse total shoulder arthroplasty

PubMed Central

Familiari, Filippo; Rojas, Jorge; Nedim Doral, Mahmut; Huri, Gazi; McFarland, Edward G.

2018-01-01

Since the introduction of reverse total shoulder arthroplasty (RTSA) in 1987 (in Europe) and 2004 (in the United States), the number of RTSAs performed annually has increased. Although the main indication for RTSA has been rotator cuff tears, indications have expanded to include several shoulder conditions, many of which involve dysfunction of the rotator cuff. RTSA complications have been reported to affect 19% to 68% of patients and include acromial fracture, haematoma, infection, instability, mechanical baseplate failure, neurological injury, periprosthetic fracture and scapular notching. Current controversies in RTSA include optimal baseplate positioning, humeral neck-shaft angle (135° versus 155°), glenosphere placement (medial, lateral or bony increased offset RTSA) and subscapularis repair. Improvements in prosthesis design, surgeon experience and clinical results will need to occur to optimize this treatment for many shoulder conditions. Cite this article: EFORT Open Rev 2018;3:58–69 DOI: 10.1302/2058-5241.3.170044 PMID:29657846

Duocentric® reversed shoulder prosthesis and Personal Fit® templates: innovative strategies to optimize prosthesis positioning and prevent scapular notching.

PubMed

Trouilloud, P; Gonzalvez, M; Martz, P; Charles, H; Handelberg, F; Nyffeler, R W; Baulot, E

2014-05-01

We describe our experience with a new system of patient-specific template called Personal Fit(®), which is unique in shoulder surgery and used in combination with Duocentric(®) prosthesis. The reverse prosthesis's concept is the invention of Paul Grammont, developed with Grammont's team of Dijon University as from 1981, which led to the first reversed total shoulder prosthesis called Trumpet in 1985. The Duocentric(®) prosthesis developed in 2001 is the third-generation prosthesis, coming from the Trumpet and the second-generation prosthesis Delta(®) (DePuy). This prosthesis provides a novel solution to the notching problem with an inferior overhang integrated onto the glenoid baseplate. Personal Fit(®) system is based on reconstructing the shoulder joint bones in three dimensions using CT scan data, placing a landmark on the scapula and locating points on the glenoid and humerus. That will be used as a reference for the patient-specific templates. We study the glenoid position planned with Personal Fit(®) software relative to native glenoid position in 30 cases. On average, the difference between the planned retroversion (or anteversion in one case) and native retroversion was 8.6°.

Reverse Shoulder Arthroplasty for the Treatment of Rotator Cuff Deficiency: A Concise Follow-up, at a Minimum of 10 Years, of Previous Reports.

PubMed

Cuff, Derek J; Pupello, Derek R; Santoni, Brandon G; Clark, Rachel E; Frankle, Mark A

2017-11-15

We previously evaluated 94 patients (96 shoulders) who underwent reverse shoulder arthroplasty using a central compressive screw with 5.0-mm peripheral locking screws for baseplate fixation and a center of rotation lateral to the glenoid as treatment for end-stage rotator cuff deficiency. The purpose of this study was to report updated results at a minimum follow-up of 10 years. Forty patients (42 shoulders) were available for clinical follow-up. In the patients available for study, implant survivorship, with the end point being revision for any reason, was 90.7%. Since our 5-year report, 2 patients underwent revision surgery; 1 patient sustained a periprosthetic fracture 7 years postoperatively and 1 patient had a dislocation because of chronic shoulder instability at 8 years postoperatively. At a minimum follow-up of 10 years, the patients continued to maintain their improved outcome scores and range of motion, which were comparable with earlier follow-up evaluations. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Linked shoulder replacement: current design problems and a new design proposal.

PubMed

Mohammed, Ali Abdullah; Frostick, Simon Peter

2016-04-01

Totally constrained shoulder replacement with linked components is one of the surgical options in post-tumor resection shoulder reconstruction or in complex shoulder revision operations. In this paper, we intend to shed light on such an implant design, which provides a linked constrained connection between the humeral head and the glenoid, and to show some immediate postoperative complications, implant progression to decrease the chances of implant mechanical postinsertion failure, and a new design proposal. In our center, we use the linked prosthesis in complex revision situations; however, there have been some complications, which could be attributed mainly to the engineering and the implant design, and hence potentially avoidable by making a different design to cover for those mechanical issues. Two such complications are described in this paper. Early revisions after linked shoulder replacement implantation were needed in two occasions due to implant disconnection: one of them was due to dislodgement from the native glenoid, and the second one was due to the disengagement of the ringlet which secures the linkage mechanism between the humeral head and the implanted glenoid shell. There is a need for a more stable design construct to avoid the reported complications that needed early revision surgeries. The new design proposed is an attempt to help providing a better and more stable implant to decrease the chances of revision in those complex situations where the patient already had many major operations, and working to increase the durability of the implant is crucial.

Reverse shoulder arthroplasty in patients with os acromiale.

PubMed

Aibinder, William R; Schoch, Bradley S; Cofield, Robert H; Sperling, John W; Sánchez-Sotelo, Joaquin

2017-09-01

Os acromiale has been reported in up to 15% of the general population. Reverse total shoulder arthroplasty (RTSA) increases deltoid tension, which could potentially lead to excessive stress on a pre-existent os acromiale. The purpose of this study was to determine the outcome and complications of primary RTSA in patients with radiographic evidence of an os acromiale. Between 2005 and 2013, 25 shoulders underwent primary RTSA with an associated os acromiale, which was classified preacromion (3), mesoacromion (20), and meta-acromion (2). All patients were observed for a minimum of 2 years or until reoperation. Mean follow-up time was 30.8 (range, 1-81.4) months. Outcomes included pain scores, range of motion, patient satisfaction, American Shoulder and Elbow Surgeons scores, and radiographic outcomes. RTSA led to an improvement in pain scores in 24 of 25 shoulders. Mean elevation, external rotation, and internal rotation were improved at final follow-up (124°, 46°, and L4, respectively). Three patients required reoperation, including revision surgery for dislocation (2) and excision of a painful os acromiale (1). Postoperative tilting of the os acromiale was noted in 7 shoulders (28%). There was no statistically significant difference in any outcome measures between shoulders with and shoulders without postoperative tilt of the os acromiale. The outcome of RTSA does not seem to be negatively affected by the presence of an os acromiale. Pain around an os acromiale after RTSA is rare. Inferior tilting is observed in approximately one-third of the shoulders after RTSA and does not seem to change the overall outcome. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Pseudoparalysis From a Massive Rotator Cuff Tear Is Reliably Reversed With an Arthroscopic Rotator Cuff Repair in Patients Without Preoperative Glenohumeral Arthritis.

PubMed

Denard, Patrick J; Lädermann, Alexandre; Brady, Paul C; Narbona, Pablo; Adams, Christopher R; Arrigoni, Paolo; Huberty, Dave; Zlatkin, Michael B; Sanders, Timothy G; Burkhart, Stephen S

2015-10-01

Pseudoparalysis is defined as active forward flexion less than 90° with full passive motion. There is controversy about the ideal surgical management of a massive rotator cuff tear with pseudoparalysis. The purpose of this study was to prospectively analyze the ability to reverse pseudoparalysis with an arthroscopic rotator cuff repair (ARCR). The hypothesis was that in the absence of substantial glenohumeral arthritis, preoperative fatty infiltration of grade 3 or higher and an acromiohumeral interval (AHI) of less than 7 mm would not prevent reversal of pseudoparalysis with an ARCR. Case series; Level of evidence, 4. A prospective multicenter study of ARCR performed for preoperative pseudoparalysis was conducted. The minimum follow-up was 1 year. The mean patient age was 63 years, and pseudoparalysis was present for a mean of 4.2 months preoperatively. Preoperative radiographic evaluation included plain film evaluation of the AHI and Hamada classification and MRI evaluation of fatty degeneration and rotator cuff retraction. Functional outcome was determined by the Simple Shoulder Test (SST), American Shoulder and Elbow Surgeons (ASES) Shoulder Score, visual analog scale (VAS), and subjective shoulder value (SSV). Of the 58 patients enrolled, 56 had at least 1 year of follow-up. Mean active forward flexion improved from 47° preoperatively to 159° postoperatively (P < .001). Statistically significant improvements were seen in the SST (from 2.8 preoperatively to 10.1 postoperatively), SSV (from 28 to 83), ASES Shoulder Score (from 37 to 88), and VAS (from 5.7 to 1.1) (P < .001). Pseudoparalysis was reversed in 53 of 56 patients (95%). There was no difference in the rate of reversal of pseudoparalysis between those patients with an AHI of less than 7 mm (88.2%) and those with an AHI of 7 mm or more (96.9%) (P =.289). Pseudoparalysis was reversed in all 8 of the patients with fatty degeneration of grade 3 or higher in 1 or more of the rotator cuff muscles. ARCR can lead to reversal of preoperative pseudoparalysis in patients with minimal preoperative glenohumeral arthritis. ARCR is a viable first line of treatment for patients with pseudoparalysis in the absence of advanced glenohumeral arthritis. © 2015 The Author(s).

[Cuff tear arthropathy – long-term results of reverse total shoulder arthroplasty].

PubMed

Brunner, U; Rückl, K; Fruth, M

2013-07-01

The results after reverse total shoulder arthroplasty for cuff tear arthropathy are superior and the complications fewer than for other etiologies, such as rheumatoid arthritis, fracture, fracture sequelae or even revision. The improvements in function and pain are excellent whereas rotation may be unaffected. Revisions and complications can be encountered in the first 3 years and the survival curve of the prosthesis is still good after 10 years with 90%. Progressive functional and radiological deterioration is observed after 9 years in approximately 30% of the patients without apparent problems with the prosthesis. Notching is progressive with incidence and size over time, without a proven correlation to the functional results but remains a major concern. Modification of the implants, the operative techniques and experience could significantly improve the results and reduce the rate of complications. Lateralization of the center of rotation and smaller inclination angles have a positive effect on the rate of notching and the range of motion, especially for the rotation. New prosthetic designs and operative techniques attempt to implement a combination of the biomechanical improvements. Reverse shoulder arthroplasty remains a challenging operation with a high rate of complications. The results depend on the etiology and the function of the remaining muscles and therefore on the experience and the skill of the surgeon to implement the appropriate biomechanical factors. Because of the concerns regarding the longevity, reverse shoulder arthroplasty should be reserved for the elderly over 70 years of age.

Step-by-Step Technique for Segmental Reconstruction of Reverse Hill-Sachs Lesions Using Homologous Osteochondral Allograft.

PubMed

Alkaduhimi, Hassanin; van den Bekerom, Michel P J; van Deurzen, Derek F P

2017-06-01

Posterior shoulder dislocations are accompanied by high forces and can result in an anteromedial humeral head impression fracture called a reverse Hill-Sachs lesion. This reverse Hill-Sachs lesion can result in serious complications including posttraumatic osteoarthritis, posterior dislocations, osteonecrosis, persistent joint stiffness, and loss of shoulder function. Treatment is challenging and depends on the amount of bone loss. Several techniques have been reported to describe the surgical treatment of lesions larger than 20%. However, there is still limited evidence with regard to the optimal procedure. Favorable results have been reported by performing segmental reconstruction of the reverse Hill-Sachs lesion with bone allograft. Although the procedure of segmental reconstruction has been used in several studies, its technique has not yet been well described in detail. In this report we propose a step-by-step description of the technique how to perform a segmental reconstruction of a reverse Hill-Sachs defect.

Risk of insufficient internal rotation after bilateral reverse shoulder arthroplasty: clinical and patient-reported outcome in 57 patients.

PubMed

Wirth, Barbara; Kolling, Christoph; Schwyzer, Hans-Kaspar; Flury, Matthias; Audigé, Laurent

2016-07-01

Bilateral reverse shoulder arthroplasty (RSA) is controversial because of potential rotational deficits impairing daily living activities. We assessed achievement of insufficient internal rotation (IR) and associated factors in bilateral RSA patients. Fifty-seven staged bilateral RSA patients with a minimum of 1 year of follow-up after the second intervention were identified from our local monocentric register. Shoulder range of motion (including IR using the Apley scratch test), strength, and Constant and Shoulder Pain and Disability Index scores were assessed preoperatively and 6, 12, and 24 months postoperatively. Before surgery, both shoulders were similar regarding imaging parameters, but first operated shoulders tended to have poorer function. One year after the first RSA, 21% of patients had insufficient IR (not reaching the lumbosacral junction) compared with 33% after the second intervention (P = .180). At 2 years, 5% of patients had insufficient IR on both sides. Patients with insufficient IR on the second side at baseline (relative risk [RR], 1.8 [1.0-3.2]) and patients with insufficient IR 1 year after the first RSA (RR, 3.0 [1.6-5.6]) were more likely to have insufficient IR 1 year after the second RSA. Constant and Shoulder Pain and Disability Index scores and abduction of the second side were significantly worse 1 year after the second RSA (P ≤ .047); at 2 years, there were no differences in functional outcome between shoulders. A minority of bilateral RSA patients did not achieve sufficient IR on at least 1 side. Staged surgery is justified, particularly when the outcome of the initial operation is satisfactory. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Use of scoring systems for assessing and reporting the outcome results from shoulder surgery and arthroplasty

PubMed Central

Booker, Simon; Alfahad, Nawaf; Scott, Martin; Gooding, Ben; Wallace, W Angus

2015-01-01

To investigate shoulder scoring systems used in Europe and North America and how outcomes might be classified after shoulder joint replacement. All research papers published in four major journals in 2012 and 2013 were reviewed for the shoulder scoring systems used in their published papers. A method of identifying how outcomes after shoulder arthroplasty might be used to categorize patients into fair, good, very good and excellent outcomes was explored using the outcome evaluations from patients treated in our own unit. A total of 174 research articles that were published in the four journals used some form of shoulder scoring system. The outcome from shoulder arthroplasty in our unit has been evaluated using the constant score (CS) and the oxford shoulder score and these scores have been used to evaluate individual patient outcomes. CSs of < 30 = unsatisfactory; 30-39 = fair; 40-59 = good; 60-69 = very good; and 70 and over = excellent. The most popular shoulder scoring systems in North America were Simple Shoulder Test and American shoulder and elbow surgeons standard shoulder assessment form score and in Europe CS, Oxford Shoulder Score and DASH score. PMID:25793164

Engineering of a multi-station shoulder simulator.

PubMed

Smith, Simon L; Li, Lisa; Joyce, Thomas J

2016-05-01

This work aimed to engineer a multi-station shoulder simulator in order to wear test shoulder prostheses using recognized shoulder activities of daily living. A bespoke simulator was designed, built and subject to commissioning trials before a first wear test was conducted. Five JRI Orthopaedics Reverse Shoulder VAIOS 42 mm prostheses were tested for 2.0 million cycles and a mean wear rate and standard deviation of 14.2 ± 2.1 mm(3)/10(6) cycles measured for the polymeric glenoid components. This result when adjusted for prostheses diameters and test conditions showed excellent agreement with results from hip simulator studies of similar materials in a lubricant of bovine serum. The Newcastle Shoulder Simulator is the first multi-station shoulder simulator capable of applying physiological motion and loading for typical activities of daily living. © IMechE 2016.

[Reconstruction and balance of soft tissue in hemi-shoulder replacement for patients with four-part fracture of the proximal humerus].

PubMed

Wu, Xing; Lou, Lie-ming; Chen, Zheng-rong; Zhang, Guang-jian

2008-10-01

To explore the effective skills of reconstruction and balance of soft tissue in hemi-shoulder replacement for patients with four-part fracture of the proximal humerus in order to avoid postoperative complications of joint instability and great tubercle displacement. From June 2002 to June 2006, 25 patients with Neer four-part fracture of the proximal humerus were adopted in the study which included 15 females and 10 males, with the mean age of 66 years (ranged from 56 years to 80 years). They were treated with humeral head replacement and should joint reparation simultaneously by modified operation approach and reconstruction and balance skills of soft tissue. The mean duration of follow-up was 2.3 years (ranged from 1 to 4.5 years). No infection, nerve damage and prosthesis loosing were found in all cases. Two cases of infra-forward dislocation or subluxation occurred due to affected limb placed on abduction splint postoperatively. One case occurred prosthesis upward displacement due to early active abduction exercise but no complains. Neither joint instability nor displacement and malunion of great tubercle were found in other patients. According to Neer scoring system, 6 cases were rated as excellent, 15 as good and 5 as fair. The good and excellent rate was 84%. In hemi-shoulder replacement for patients with Neer four-part fracture the modified operation approach and reconstruction and balance of soft tissue skills combined with rational rehabilitation exercise can prevent postoperative shoulder joint instability and displacement and malunion of great tubercle.

A Critical Review on Prosthetic Features Available for Reversed Total Shoulder Arthroplasty

PubMed Central

De Wilde, Lieven

2016-01-01

Reversed total shoulder arthroplasty is a popular treatment in rotator cuff arthropathy and in displaced proximal humeral fractures in elderly. In 2016, 29 models of commercially available designs express this popularity. This study describes all the different design parameters available on the market. Prosthetic differences are found for the baseplate, glenosphere, polyethylene, and humeral component and these differences need to be weighed out carefully for each patient knowing that a gain in one mechanical parameter can balance the loss of another. Patient specific implants may help in the future. PMID:28105417

Allograft-Prosthetic Composite Reconstruction for Massive Proximal Humeral Bone Loss in Reverse Shoulder Arthroplasty.

PubMed

Sanchez-Sotelo, Joaquin; Wagner, Eric R; Sim, Franklin H; Houdek, Matthew T

2017-12-20

Reverse total shoulder arthroplasty (RTSA) performed in the setting of massive proximal humeral bone loss often requires special reconstructive techniques. Restoration of the proximal part of the humerus with an allograft provides a number of theoretical benefits, including implant support, restoration of humeral length, deltoid tensioning, and an opportunity to repair the posterior aspect of the cuff to improve strength in external rotation and repair of the subscapularis to improve stability. However, reverse allograft-prosthesis composites (APCs) are costly, are technically demanding to use, and can be compromised by progressive allograft resorption. Between 2005 and 2012, the lead author used an APC reconstruction in 8 primary and 18 revision RTSAs (26 patients; mean age, 62 years; mean body mass index, 27.9 kg/m). The indications for the primary RTSAs included severe proximal humeral bone loss after trauma (n = 5) and tumor resection (n = 3). The indications in the revision setting were failed hemiarthroplasty (n = 11), anatomic total shoulder arthroplasty (n = 4), and reverse arthroplasty (n = 3). The most common reason for revision was instability (n = 10). A compression plate was used for graft-to-host fixation in all shoulders. Shoulders were assessed for pain, motion, American Shoulder and Elbow Surgeons (ASES) score, Simple Shoulder Test (SST) score, Neer score, revision or reoperation, radiographic evidence of graft union or resorption, and implant fixation. The mean duration of follow-up was 4 years (range, 2 to 10 years). RTSA using an APC construct resulted in substantial improvements in pain scores (p < 0.0001), elevation (p < 0.0001), and external rotation (p = 0.004). With the numbers available, there were no significant differences in clinical outcomes between primary and revision cases. No patients required revision surgery for nonunion at the host-allograft junction. The mean time to union was 7 months, with 1 patient requiring bone-grafting for delayed union. Other complications included dislocation, deep infection, graft fracture, and periprosthetic fracture distal to the previous APC construct in 1 patient each. The 2 and 5-year revision-free survival rate was 96%. Reconstruction of proximal humeral bone loss with an APC at the time of primary or revision RTSA is safe and effective, with acceptable functional outcomes and complication rates. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

How do deltoid muscle moment arms change after reverse total shoulder arthroplasty?

PubMed

Walker, David R; Struk, Aimee M; Matsuki, Keisuke; Wright, Thomas W; Banks, Scott A

2016-04-01

Although many advantages of reverse total shoulder arthroplasty (RTSA) have been demonstrated, a variety of complications indicate there is much to learn about how RTSA modifies normal shoulder function. This study used a subject-specific computational model driven by in vivo kinematic data to assess how RTSA affects deltoid muscle moment arms after surgery. A subject-specific 12 degree-of-freedom musculoskeletal model was used to analyze the shoulders of 26 individuals (14 RTSA and 12 normal). The model was modified from the work of Holzbaur to directly input 6 degree-of-freedom humeral and scapular kinematics obtained using fluoroscopy. The moment arms of the anterior, lateral, and posterior aspects of the deltoid were significantly different when RTSA and normal cohorts were compared at different abduction angles. Anterior and lateral deltoid moment arms were significantly larger in the RTSA group at the initial elevation of the arm. The posterior deltoid was significantly larger at maximum elevation. There was large intersubject variability within the RTSA group. Placement of implant components during RTSA can directly affect the geometric relationship between the humerus and scapula and the muscle moment arms in the RTSA shoulder. RTSA shoulders maintain the same anterior and posterior deltoid muscle moment-arm patterns as healthy shoulders but show much greater intersubject variation and larger moment-arm magnitudes. These observations provide a basis for determining optimal implant configuration and surgical placement to maximize RTSA function in a patient-specific manner. Published by Elsevier Inc.

Neurological Complications Related to Elective Orthopedic Surgery: Part 1: Common Shoulder and Elbow Procedures.

PubMed

Dwyer, Tim; Henry, Patrick D G; Cholvisudhi, Phantila; Chan, Vincent W S; Theodoropoulos, John S; Brull, Richard

2015-01-01

Many anesthesiologists are unfamiliar with the rate of surgical neurological complications of the shoulder and elbow procedures for which they provide local anesthetic-based anesthesia and/or analgesia. Part 1 of this narrative review series on neurological complications of elective orthopedic surgery describes the mechanisms and likelihood of peripheral nerve injury associated with some of the most common shoulder and elbow procedures, including open and arthroscopic shoulder procedures, elbow arthroscopy, and total shoulder and elbow replacement. Despite the many articles available, the overall number of studied patients is relatively low. Large prospective trials are required to establish the true incidence of neurological complications following elective shoulder and elbow surgery. As the popularity of regional anesthesia increases with the development of ultrasound guidance, anesthesiologists should have a thoughtful understanding of the nerves at risk of surgical injury during elective shoulder and elbow procedures.

Shoulder Arthroplasty Imaging: What’s New

PubMed Central

Gregory, T.M

2017-01-01

Background: Shoulder arthroplasty, in its different forms (hemiarthroplasty, total shoulder arthroplasty and reverse total shoulder arthroplasty) has transformed the clinical outcomes of shoulder disorders. Improvement of general clinical outcome is the result of stronger adequacy of the treatment to the diagnosis, enhanced surgical techniques, specific implanted materials, and more accurate follow up. Imaging is an important tool in each step of these processes. Method: This article is a review article declining recent imaging processes for shoulder arthroplasty. Results: Shoulder imaging is important for shoulder arthroplasty pre-operative planning but also for post-operative monitoring of the prosthesis and this article has a focus on the validity of plain radiographs for detecting radiolucent line and on new Computed Tomography scan method established to eliminate the prosthesis metallic artefacts that obscure the component fixation visualisation. Conclusion: Number of shoulder arthroplasties implanted have grown up rapidly for the past decade, leading to an increase in the number of complications. In parallel, new imaging system have been established to monitor these complications, especially component loosening PMID:29152007

Measurements of three-dimensional glenoid erosion when planning the prosthetic replacement of osteoarthritic shoulders.

PubMed

Terrier, A; Ston, J; Larrea, X; Farron, A

2014-04-01

The three-dimensional (3D) correction of glenoid erosion is critical to the long-term success of total shoulder replacement (TSR). In order to characterise the 3D morphology of eroded glenoid surfaces, we looked for a set of morphological parameters useful for TSR planning. We defined a scapular coordinates system based on non-eroded bony landmarks. The maximum glenoid version was measured and specified in 3D by its orientation angle. Medialisation was considered relative to the spino-glenoid notch. We analysed regular CT scans of 19 normal (N) and 86 osteoarthritic (OA) scapulae. When the maximum version of OA shoulders was higher than 10°, the orientation was not only posterior, but extended in postero-superior (35%), postero-inferior (6%) and anterior sectors (4%). The medialisation of the glenoid was higher in OA than normal shoulders. The orientation angle of maximum version appeared as a critical parameter to specify the glenoid shape in 3D. It will be very useful in planning the best position for the glenoid in TSR.

Conversion to Reverse Total Shoulder Arthroplasty with and without Humeral Stem Retention: The Role of a Convertible-Platform Stem.

PubMed

Crosby, Lynn A; Wright, Thomas W; Yu, Stephen; Zuckerman, Joseph D

2017-05-03

Revision shoulder arthroplasty is a technically challenging procedure. It is associated with increased blood loss and operative time, and it frequently necessitates revision implants, augments, and bone-grafting. Shoulder arthroplasty systems with a convertible-platform humeral stem have been developed to reduce the complexity of revision procedures by eliminating the need for humeral component explantation when converting from anatomic shoulder arthroplasty (hemiarthroplasty or total shoulder arthroplasty) to reverse total shoulder arthroplasty (rTSA). A multicenter, retrospective analysis involving 102 consecutive shoulders (102 patients) that underwent revision of an anatomic shoulder arthroplasty to an rTSA was conducted. During the revision, 73 of the shoulders needed exchange of the humeral stem (the exchange group) and 29 had retention of a convertible-platform humeral component (the retention group). Patient demographics, operative time, blood management, range of motion, complications, and patient-reported outcomes were compared between the 2 groups. Patients with retention had significantly shorter operative time (mean and standard deviation, 130 ± 48 versus 195 ± 58 minutes; p < 0.001) and lower estimated blood loss (292 ± 118 versus 492 ± 334 mL; p = 0.034). The rate of intraoperative complications was lower in the retention group (0% versus 15%; p = 0.027). Patients with retention had slightly better postoperative range of motion (active external rotation, 26° ± 23° versus 11° ± 23° [p = 0.006]; active forward elevation, 112° ± 37° versus 96° ± 33° [p = 0.055]). Shoulder arthroplasty systems that utilize a convertible-platform humeral stem offer an advantage for rTSA conversion in that a well-fixed, well-positioned humeral stem can be retained. There were significantly fewer complications as well as significantly decreased blood loss and operative time when a convertible-platform stem was utilized (p < 0.050). Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The structure of molten CuCl: Reverse Monte Carlo modeling with high-energy X-ray diffraction data and molecular dynamics of a polarizable ion model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alcaraz, Olga; Trullàs, Joaquim, E-mail: quim.trullas@upc.edu; Tahara, Shuta

2016-09-07

The results of the structural properties of molten copper chloride are reported from high-energy X-ray diffraction measurements, reverse Monte Carlo modeling method, and molecular dynamics simulations using a polarizable ion model. The simulated X-ray structure factor reproduces all trends observed experimentally, in particular the shoulder at around 1 Å{sup −1} related to intermediate range ordering, as well as the partial copper-copper correlations from the reverse Monte Carlo modeling, which cannot be reproduced by using a simple rigid ion model. It is shown that the shoulder comes from intermediate range copper-copper correlations caused by the polarized chlorides.

Effects of the humeral tray component positioning for onlay reverse shoulder arthroplasty design: a biomechanical analysis.

PubMed

Berhouet, Julien; Kontaxis, Andreas; Gulotta, Lawrence V; Craig, Edward; Warren, Russel; Dines, Joshua; Dines, David

2015-04-01

Recent shoulder prostheses have introduced a concept of a universal humeral stem component platform that has an onlay humeral tray for the reverse total shoulder arthroplasty (RTSA). No studies have reported how humeral tray positioning can affect the biomechanics of RTSA. The Newcastle Shoulder Model was used to investigate the biomechanical effect of humeral tray positioning in the Biomet Comprehensive Total Shoulder System (Biomet, Warsaw, IN, USA) RTSA. Five humeral tray configuration positions were tested: no offset, and 5 mm offset in the anterior, posterior, medial, and lateral positions. Superior and inferior impingement were evaluated for abduction, scapular plane elevation, forward flexion, and external/internal rotation with the elbow at the side (adduction) and at 90° of shoulder abduction. Muscle lengths and moment arms (elevating and rotational) were calculated for the deltoid, the infraspinatus, the teres minor, and the subscapularis. Inferior impingement was not affected by the humeral tray position. There was less superior impingement during abduction, scapular plane elevation, and rotation with the shoulder when the tray was placed laterally or posteriorly. The subscapularis rotational moment arm was increased with a posterior offset, whereas infraspinatus and teres minor rotational moment arms were increased with an anterior offset. Very little change was observed for the deltoid elevating moment arm or for its muscle length. Positioning the humeral tray with posterior offset offers a biomechanical advantage for patients needing RTSA by decreasing superior impingement and increasing the internal rotational moment arm of the subscapularis, without creating inferior impingement. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Revision to Reverse Total Shoulder Arthroplasty Restores Stability for Patients With Unstable Shoulder Prostheses.

PubMed

Hernandez, Nicholas M; Chalmers, Brian P; Wagner, Eric R; Sperling, John W; Cofield, Robert H; Sanchez-Sotelo, Joaquin

2017-11-01

Instability after shoulder arthroplasty remains a complication with limited salvage options. Reoperation for instability with anatomic designs has led to high rates of persistent instability, therefore we aimed to evaluate the use of RSA for treatment of prosthetic instability. (1) After revision shoulder arthroplasty to a reverse prosthesis (RSA), what is the survivorship free from dislocations at 2 and 5 years? (2) What factors are associated with dislocations? (3) What is the survivorship free from revision after revision to RSA? (4) From preoperation to postrevision to RSA, what are the clinical outcomes-the proportion of patients with moderate to severe pain, shoulder elevation and external rotation ROM, American Shoulder and Elbow Surgeons scores, and Simple Shoulder Test scores? All shoulder arthroplasties revised for prosthetic instability using RSA components between January 2004 and July 2014 were retrospectively studied. During the period in question, we performed 82 revisions for instability of an anatomic total shoulder arthroplasty (TSA) (n = 62), hemiarthroplasty (n = 13), or reverse TSA (n = 7). We typically used a reverse TSA to treat this problem, but we identified 12 treated in other ways, including revision of a TSA to hemiarthroplasty (n = 3), revision of a reverse TSA to hemiarthroplasty (n = 2), revision of hemiarthroplasty to a hemiarthroplasty (n = 1), and revision of an anatomic TSA to another anatomic TSA (n = 6). This left 70 patients for evaluation; of those, 65 (93%) were available for analysis at a mean of 3 years (range, 2-10 years). A total of seven patients died. Eight of the 65 shoulders were not evaluated during the last 5 years, including three in patients who died earlier. The mean age of the patients at the time of revision RSA was 65 years (range, 40-89 years). Data were obtained from a longitudinally maintained institutional joint registry. Instability was defined as severe subluxation confirmed on clinical and radiographic examinations. We evaluated pain and ROM, and Kaplan-Meier curves were used to estimate survivorship. The survivorship free from dislocation at 2 and 5 years was 87% (95% CI, 80%-94%) and 79% (95% CI, 67%-91%) respectively, with 10 of 65 (15%) patients having an episode of dislocation after revision surgery. Persistent instability was more common in those with a BMI greater than 35 kg/m 2 (hazard ratio [HR], 5; 95% CI, 2-16; p = 0.008) and prior hemiarthroplasty (HR, 5; 95% CI, 2-16; p = 0.005), whereas patients who had undergone a previous TSA were less likely to have persistent instability (HR, 0.08; 95% CI, 0.0-0.30; p < 0.001) The survival free from rerevision for any indication at 2 and 5 years was 85% (95% CI, 76%-94%) and 78% (95% CI, 66%-90%) respectively; with the numbers available, we were not able to find associated factors. Fewer patients had moderate or severe pain after revision to RSA (preoperative: 48 of 65 [74%]; postoperative: nine of 65 [14%]; p < 0.001). After surgery, patients showed improvement in shoulder elevation (preoperative: 42° [± 30°], postoperative: 112° [42°]; mean difference, 70° [95% CI, - 83 o to 57°]; p < 0.001) and external rotation (preoperative: 20° [± 22°], postoperative: 42° [± 23°]; mean difference, 22° [95% CI, - 30° to - 14°]; p < 0.001). American Shoulder and Elbow Surgeons scores improved (preoperative: 21 [± 10], postoperative: 68 [± 14], mean difference, 46 [95% CI, - 58 to - 35]; p < 0.001); where a higher score is better. Simple Shoulder Test scores also improved (preoperative: 2/12 [± 2], postoperative: 7/12 [± 3]; mean difference, 5 [95% CI, - 7 to - 2.17]; p < 0.001); where a higher score is better. Revision RSA for prosthetic instability after shoulder arthroplasty is associated with reasonable implant survival and few complications. Approximately one in seven patients will have a recurrent dislocation. In patients with persistent instability or with risk factors for instability, consideration should be given for use of larger glenospheres and increasing the lateral offset at the time of RSA. Level IV, therapeutic study.

Outcomes of reverse shoulder arthroplasty using a mini 25-mm glenoid baseplate.

PubMed

Athwal, George S; Faber, Kenneth J

2016-01-01

As worldwide use of reverse shoulder arthroplasty (RSA) increases, a range of implant sizes may be required to match regional and ethnic variation in patients' height and bone size. The purpose of this study was to report the outcomes of RSA using a mini 25-mm-diameter glenoid baseplate in smaller patients with rotator cuff arthropathy. Between 2009 and 2012, 28 patients underwent RSA for cuff-tear arthropathy using a 25-mm circular glenoid baseplate (Aequlais Reversed, Tornier, Bloomington, MN, USA). Twenty-four patients were able to return for comprehensive follow-up. The mean height of the entire cohort was 158 ± 10 cm (5 ft. 2 in.). The indication to use a smaller baseplate was a combination of preoperative templating using computed tomography (CT) and intraoperative measurements of glenoid width. At a mean of 36 ± 8 months' follow-up, there were no revisions or glenoid-sided failures. The mean American Shoulder and Elbow Surgeons (ASES) score was 70 ± 10, the Simple Shoulder Test (SST) was 10 ± 2, the Constant was 60 ± 10 and the Disabilities of the Arm, Shoulder and Hand (DASH) was 18 ± 15. Mean active forward elevation was 140 ± 15°, active external rotation was 21 ± 15° and active internal rotation was to the sacroiliac joint. Mean shoulder strength in flexion was 5.2 ± 1.7 kg, in external rotation was 2.9 ± 1.4 kg and in internal rotation was 4.3 ± 1.2 kg. Radiographs demonstrated no evidence of glenoid loosening. There was, however, a 62 % rate of scapular notching. Short-term outcomes of mini 25-mm baseplate RSA in proportionally smaller patients are good and demonstrate implant safety and effectiveness. Scapular notching rates are worrisome, and additional follow-up is necessary to determine if notching is progressive and becomes symptomatic.

Failure after reverse total shoulder arthroplasty: what is the success of component revision?

PubMed

Black, Eric M; Roberts, Susanne M; Siegel, Elana; Yannopoulos, Paul; Higgins, Laurence D; Warner, Jon J P

2015-12-01

Complication rates remain high after reverse total shoulder arthroplasty (RTSA). Salvage options after implant failure have not been well defined. This study examines the role of reimplantation and revision RTSA after failed RTSA, reporting outcomes and complications of this salvage technique. Sixteen patients underwent component revision and reimplantation after a prior failed RTSA from 2004 to 2011. Indications included baseplate failure (7 patients, 43.8%), instability (6 patients, 37.5%), infection (2 patients, 12.5%), and humeral loosening (1 patient, 6.3%). The average age of the patient during revision surgery was 68.6 years. Outcomes information at follow-up was recorded, including visual analog scale score for pain, subjective shoulder value, American Shoulder and Elbow Surgeons score, and Simple Shoulder Test score, and these were compared with pre-revision values. Repeated surgeries and complications were noted. Average time to follow-up from revision was 58.9 months (minimum, 2 years; range, 24-103 months). The average postoperative visual analog scale score for pain was 1.7/10 (7.5/10 preoperatively; P < .0001), and the subjective shoulder value was 62% (17% preoperatively; P < .0001). The average postoperative American Shoulder and Elbow Surgeons score was 66.7, and the Simple Shoulder Test score was 52.6. Fourteen patients (88%) noted that they felt "better" postoperatively than before their original RTSA and would go through the procedure again if given the option. Nine patients suffered major complications (56%), and 6 of these ultimately underwent further procedures (38% of cohort). Salvage options after failure of RTSA remain limited. Component revision and reimplantation can effectively relieve pain and improve function compared with baseline values, and patient satisfaction levels are moderately high. However, complication rates and reoperation rates are significant. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Periprosthetic shoulder infection in the United States: incidence and economic burden.

PubMed

Padegimas, Eric M; Maltenfort, Mitchell; Ramsey, Matthew L; Williams, Gerald R; Parvizi, Javad; Namdari, Surena

2015-05-01

Periprosthetic joint infection (PJI) is a major cause of morbidity after shoulder arthroplasty. PJI epidemiology has not been well studied. We aimed to analyze the historical incidence, predisposing factors, and economic burden of PJI after shoulder arthroplasty in the United States. Primary shoulder arthroplasty patients were identified by the International Classification of Diseases, Ninth Revision, Clinical Modification codes 81.80 (total shoulder arthroplasty), 81.81 (hemiarthroplasty), and 81.88 (reverse arthroplasty) in the Nationwide Inpatient Sample from 2002 to 2011. PJI was identified by codes 80.01 (arthrotomy for device removal) and 996.66 (prosthetic infection). Multivariate logistic regression analysis was used to identify predisposing factors for PJI. PJI rate was 0.98% from 2002 to 2011 and did not vary significantly. Comorbidities associated with PJI were weight loss/nutritional deficiency (odds ratio [OR], 2.62; 95% confidence interval [CI], 1.53-4.51; P = .00047), drug abuse (OR, 2.38; 95% CI, 1.41-4.02; P = .0011), and anemia from blood loss (OR, 2.43; 95% CI, 1.50-3.93; P = .00031) or iron deficiency (OR, 2.05; 95% CI, 1.69-2.49; P < .0001). Demographic factors associated with PJI were younger age (OR, 1.020; 95% CI, 1.017-1.024; P < .0001) and male gender (OR, 1.961; 95% CI, 1.816-2.117; P < .0001). In 2011, median hospitalization costs for PJI were $17,163.57 compared with $16,132.68, $13,955.83, and $20,007.87 for total shoulder arthroplasty, hemiarthroplasty, and reverse arthroplasty, respectively. Increasing incidence of shoulder arthroplasty and a constant infection rate will result in greater overall PJI burden. Whereas hospitalization costs for PJI are comparable to those of primary arthroplasty, they are incurred after the original cost of shoulder arthroplasty. Certain identifiable patient variables correlate with higher PJI rates. Risk factor modification may decrease PJI incidence and help contain costs. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Reverse shoulder arthroplasty in 3 and 4 part proximal humeral fractures in patients aged more than 65 years: Results and complications.

PubMed

Villodre-Jiménez, J; Estrems-Díaz, V; Diranzo-García, J; Bru-Pomer, A

The treatment of 3and 4 part proximal humeral fractures in elderly patients is still controversial. The frequent co-existence of poor quality bone and rotator cuff abnormalities in patients with multiple clinical conditions and with difficulties for physical rehabilitation leads to disappointing clinical results, even when the radiological images are acceptable. To evaluate the clinical, radiological, and functional results in patients over 65 years old with complex proximal humerus fractures treated with reverse shoulder arthroplasty. A prospective review was carried out on 30 patients (26 women and 4 men) with proximal humeral fractures treated with reverse shoulder arthroplasty in our department. The mean age was 74.9 years (SD=6.3), and the mean follow-up was 34.5 months (SD=19.3). Clinical and functional results were acceptable, with a mean forward flexion of 124° and a mean external rotation of 13°. The mean abbreviated Constant abbreviated score was 49.1 (SD=14.1), 27 (SD=6.3) in the UCLA scale, and 32.2 (SD=19.2) in the QuickDASH questionnaire. The large majority (80%) of the patients are pain free, and they do not need medication to do daily activities. The complication rate was 13.3%. We consider that reverse shoulder arthroplasty is a valid option to treat 3and 4 part proximal humeral fractures in elderly patients. The surgical goals should include the anatomical reconstruction of the tuberosities, avoiding enlargement of the operated arm greater than 2cm. Copyright © 2016 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

Scapular notching in reverse shoulder arthroplasty: validation of a computer impingement model.

PubMed

Roche, Christopher P; Marczuk, Yann; Wright, Thomas W; Flurin, Pierre-Henri; Grey, Sean G; Jones, Richard B; Routman, Howard D; Gilot, Gregory J; Zuckerman, Joseph D

2013-01-01

The purpose of this study is to validate a reverse shoulder computer impingement model and quantify the impact of implant position on scapular impingement by comparing it to that of a radiographic analysis of 256 patients who received the same prosthesis and were followed postoperatively for an average of 22.2 months. A geometric computer analysis quantified anterior and posterior scapular impingement as the humerus was internally and externally rotated at varying levels of abduction and adduction relative to a fixed scapula at defined glenoid implant positions. These impingement results were compared to radiographic study of 256 patients who were analyzed for notching, glenoid baseplate position, and glenosphere overhang. The computer model predicted no impingement at 0° humeral abduction in the scapular plane for the 38 mm, 42 mm, and 46 mm devices when the glenoid baseplate cage peg is positioned 18.6 mm, 20.4 mm, and 22.7 mm from the inferior glenoid rim (of the reamed glenoid) or when glenosphere overhang of 4.6 mm, 4.7 mm, and 4.5 mm was obtained with each size glenosphere, respectively. When compared to the radiographic analysis, the computer model correctly predicted impingement based upon glenoid base- plate position in 18 of 26 patients with scapular notching and based upon glenosphere overhang in 15 of 26 patients with scapular notching. Reverse shoulder implant positioning plays an important role in scapular notching. The results of this study demonstrate that the computer impingement model can effectively predict impingement based upon implant positioning in a majority of patients who developed scapular notching clinically. This computer analysis provides guidance to surgeons on implant positions that reduce scapular notching, a well-documented complication of reverse shoulder arthroplasty.

Unique Phrenic Nerve-Sparing Regional Anesthetic Technique for Pain Management after Shoulder Surgery

PubMed Central

Olsen, David A.; Amundson, Adam W.

2017-01-01

Background Ipsilateral phrenic nerve blockade is a common adverse event after an interscalene brachial plexus block, which can result in respiratory deterioration in patients with preexisting pulmonary conditions. Diaphragm-sparing nerve block techniques are continuing to evolve, with the intention of providing satisfactory postoperative analgesia while minimizing hemidiaphragmatic paralysis after shoulder surgery. Case Report We report the successful application of a combined ultrasound-guided infraclavicular brachial plexus block and suprascapular nerve block in a patient with a complicated pulmonary history undergoing a total shoulder replacement. Conclusion This case report briefly reviews the important innervations to the shoulder joint and examines the utility of the infraclavicular brachial plexus block for postoperative pain management. PMID:29410922

Anatomical shoulder arthroplasty in epileptic patients with instability arthropathy and persistent seizures.

PubMed

Thangarajah, Tanujan; Falworth, Mark; Lambert, Simon M

2017-01-01

Epileptic seizures can cause shoulder dislocation, recurrent instability and eventually arthritis. The purpose of this study was to report the results, complications and rate of revision surgery following anatomical shoulder arthroplasty in epileptic patients with instability arthropathy. A consecutive series of eight patients with epilepsy underwent anatomical shoulder arthroplasty for recurrent shoulder instability and were retrospectively reviewed after a mean of 4.7 years (range, 2-7.5 years). These included three total shoulder replacements and five humeral resurfacing hemiarthroplasty procedures. Mean age of the cohort was 33 years (range, 17-44). All patients experienced post-operative grand mal seizures. Two patients with hemiarthroplasty required further surgery due to painful glenoid erosion. No residual cases of instability were noted. Mean active forward elevation and external rotation improved following surgery. The Oxford Shoulder Score improved from 15 pre-operatively (range, 7-22) to 26 post-operatively (range, 12-45) ( p = 0.031). This was accompanied by an increase in the mean Subjective Shoulder Value, which improved from 29 (range, 10-80) pre-operatively to 53 (range, 15-90) post-operatively ( p=0.042). Anatomical shoulder arthroplasty may offer a solution for the treatment of instability arthropathy in patients with epilepsy and persistent seizures.

Speed of recovery after shoulder arthroplasty: a comparison of reverse and anatomic total shoulder arthroplasty.

PubMed

Levy, Jonathan C; Everding, Nathan G; Gil, Carlos C; Stephens, Scott; Giveans, M Russell

2014-12-01

Whereas patient expectations after anatomic total shoulder arthroplasty (TSA) and reverse shoulder arthroplasty (RSA) relate to sustained improvements in pain, function, and motion, the time necessary to reach these goals is unclear. Our purpose was to investigate the speed of recovery and to compare the effectiveness of primary TSA and RSA. We analyzed (preoperative, 3 month, 6 month, 1-year, and 2-year scores) pain scores, functional scores, and motion for 122 patients treated with primary RSA and 166 patients treated with primary TSA with a minimum of 1 year of follow-up. Comparisons were made to determine the effectiveness of treatment, time required to reach a plateau in improvement, and percentage of overall improvement at 3 and 6 months. Significant improvements were observed for both TSA and RSA at all intervals (P < .001), except with internal rotation for RSA. Pain relief was rapid after both TSA and RSA. TSA patients reached a consistent plateau for pain and function by 6 months and for shoulder elevation by 1 year. RSA patients demonstrated variability with multiple false plateau points. By 6 months, TSA patients had achieved 90% to 100% of functional improvement, whereas RSA patients reached 72% to 91%. The effectiveness of TSA was greater than that of RSA for all measures with the exception of elevation and abduction. Whereas patients treated with primary TSA and RSA can expect rapid improvements in pain, those treated with TSA can anticipate a more consistent and effective recovery of pain, function, and shoulder rotation. Patients receiving RSA can expect a variable length of recovery with greater improvements in forward elevation and abduction. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Effect of lateralized design on muscle and joint reaction forces for reverse shoulder arthroplasty.

PubMed

Liou, William; Yang, Yang; Petersen-Fitts, Graysen R; Lombardo, Daniel J; Stine, Sasha; Sabesan, Vani J

2017-04-01

Manufacturers of reverse shoulder arthroplasty (RSA) implants have recently designed innovative implants to optimize performance in rotator cuff-deficient shoulders. These advancements are not without tradeoffs and can have negative biomechanical effects. The objective of this study was to develop an integrated finite element analysis-kinematic model to compare the muscle forces and joint reaction forces (JRFs) of 3 different RSA designs. A kinematic model of a normal shoulder joint was adapted from the Delft model and integrated with the well-validated OpenSim shoulder model. Static optimizations then allowed for calculation of the individual muscle forces, moment arms, and JRFs relative to net joint moments. Three-dimensional computer models of 3 RSA designs-humeral lateralized design (HLD), glenoid lateralized design, and Grammont design-were integrated, and parametric studies were performed. Overall, there were decreases in deltoid and rotator cuff muscle forces for all 3 RSA designs. These decreases were greatest in the middle deltoid of the HLD model for abduction and flexion and in the rotator cuff muscles under both internal rotation and external rotation. The JRFs in abduction and flexion decreased similarly for all RSA designs compared with the normal shoulder model, with the greatest decrease seen in the HLD model. These findings demonstrate that the design characteristics implicit in these modified RSA prostheses result in mechanical differences most prominently seen in the deltoid muscle and overall JRFs. Further research using this novel integrated model can help guide continued optimization of RSA design and clinical outcomes. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Revision of failed shoulder hemiarthroplasty to reverse total arthroplasty: analysis of 157 revision implants.

PubMed

Merolla, Giovanni; Wagner, Eric; Sperling, John W; Paladini, Paolo; Fabbri, Elisabetta; Porcellini, Giuseppe

2018-01-01

There remains a paucity of studies examining the conversion of failed hemiarthroplasty (HA) to reverse total shoulder arthroplasty (RTSA). Therefore, the purpose of this study was to examine a large series of revision HA to RTSA. A population of 157 patients who underwent conversion of a failed HA to a revision RTSA from 2006 through 2014 were included. The mean follow-up was 49 months (range, 24-121 months). The indications for revision surgery included instability with rotator cuff insufficiency (n = 127) and glenoid wear (n = 30); instability and glenoid wear were associated in 38 cases. Eight patients with infection underwent 2-stage reimplantation. Patients experienced significant improvements in their preoperative to postoperative pain and shoulder range of motion (P < .0001), with median American Shoulder and Elbow Surgeons and Simple Shoulder Test scores of 60 and 6 points, respectively. There were 11 (7%) repeated revision surgeries, secondary to glenoid component loosening (n = 3), instability (n = 3), humeral component disassembly (n = 2), humeral stem loosening (n = 1), and infection (n = 2). Implant survivorship was 95.5% at 2 years and 93.3% at 5 years. There were 4 reoperations including axillary nerve neurolysis (n = 2), heterotopic ossification removal (n = 1), and hardware removal for rupture of the metal cerclage for an acromial fracture (n = 1). At final follow-up, there were 5 "at-risk" glenoid components. Patients experience satisfactory pain relief and recovery of reasonable shoulder function after revision RTSA from a failed HA. There was a relatively low revision rate, with glenoid loosening and instability being the most common causes. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Impact of Posterior Wear on Muscle Length with Reverse Shoulder Arthroplasty.

PubMed

Roche, Christopher P; Diep, Phong; Hamilton, Matthew A; Wright, Thomas W; Flurin, Pierre-Henri; Zuckerman, Joseph D; Routman, Howard D

2015-12-01

The use of reverse total shoulder arthroplasty (rTSA) in patients with posterior glenoid wear can be challenging. Implanting a baseplate in the correct version may require significant eccentric reaming, which further medializes the joint line and results in greater rotator cuff muscle shortening. To restore the joint line, bone graft may be required, though it is associated with additional risks. As an alternative solution, augmented glenoid baseplates offer the potential to restore the joint line and improve rotator cuff muscle tensioning without the need for eccentric reaming or supplemental bone graft. To that end, this computer analysis quantifies the rotator cuff muscle length for standard and augmented rTSA when used in a normal and posteriorly worn glenoid. These results demonstrate that shortening of the rotator cuff occurred for both the standard and posterior augmented reverse shoulder designs with additional muscle shortening occurring in scapula with posteriorly worn glenoids. More anatomic rotator cuff muscle tensioning was observed with augmented glenoid baseplates. The use of posterior augmented glenoid baseplates has the potential to improve stability and better restore active internal and external rotation, a current limitation of rTSA. However, clinical follow-up is necessary to confirm these favorable biomechanical results.

Preventing brachial plexus injury during shoulder surgery: a real-time cadaveric study.

PubMed

Kam, Andrew W; Lam, Patrick H; Haen, Pieter S W A; Tan, Martin; Shamsudin, Aminudin; Murrell, George A C

2018-05-01

Brachial plexopathy is not uncommon after shoulder surgery. Although thought to be due to stretch neuropathy, its etiology is poorly understood. This study aimed to identify arm positions and maneuvers that may risk causing brachial plexopathy during shoulder arthroplasty. Tensions in the cords of the brachial plexuses of 6 human cadaveric upper limbs were measured using load cells while each limb was placed in different arm positions and while they underwent shoulder hemiarthroplasty and revision reverse arthroplasty. Arthroplasty procedures in 4 specimens were performed with standard limb positioning (unsupported), and 2 specimens were supported from under the elbow (supported). Each cord then underwent biomechanical testing to identify tension corresponding to 10% strain (the stretch neuropathy threshold in animal models). Tensions exceeding 15 N, 11 N, and 9 N in the lateral, medial, and posterior cords, respectively, produced 10% strain. Shoulder abduction >70° and combined external rotation >60° with extension >50° increased medial cord tension above the 10% strain threshold. Medial cord tensions (mean ± standard error of the mean) in unsupported specimens increased over baseline during hemiarthroplasty (sounder insertion [4.7 ± 0.6 N, P = .04], prosthesis impaction [6.1 ± 0.8 N, P = .04], and arthroplasty reduction [5.0 ± 0.7 N, P = .04]) and revision reverse arthroplasty (retractor positioning [7.2 ± 0.8 N, P = .02]). Supported specimens experienced lower tensions than unsupported specimens. Shoulder abduction >70°, combined external rotation >60° with extension >50°, and downward forces on the humeral shaft may risk causing brachial plexopathy. Retractor placement, sounder insertion, humeral prosthesis impaction, and arthroplasty reduction increase medial cord tensions during shoulder arthroplasty. Supporting the arm from under the elbow protected the brachial plexus in this cadaveric model. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Indications for reverse total shoulder arthroplasty in rotator cuff disease.

PubMed

Drake, Gregory N; O'Connor, Daniel P; Edwards, T Bradley

2010-06-01

Reverse total shoulder arthroplasty (RTSA) was introduced to treat rotator cuff tear arthropathy but is now used to treat a variety of problems. Although its use has expanded substantially since the FDA's approval in 2004, the appropriateness in patients with rotator cuff disease is unclear. We review the use of RTSA in patients with rotator cuff disease to (1) describe classification of rotator cuff tear reparability and the concept of a balanced shoulder; (2) explore the theory behind RTSA design relative to rotator cuff arthropathy; (3) discuss the indications and contraindications for RTSA; and (4) review published outcomes of RTSA for rotator cuff arthropathy. We performed a selective review of the literature on the use of RTSA in the treatment of rotator cuff disease. Modern RTSA designs restore deltoid tension and a functional fulcrum to the rotator cuff deficient shoulder, which allows recovery of active shoulder elevation and effectively restores function in short- and medium-term followup studies. In short-term followup the RTSA relieves symptoms and restores function for patients with cuff tear arthropathy and irreparable rotator cuff tears with pseudoparalysis (preserved deltoid contraction but loss of active elevation). Severely impaired deltoid function, an isolated supraspinatus tear, and the presence of full active shoulder elevation with a massive rotator cuff tear and arthritis are contraindications to RTSA. For properly selected patients who have symptomatic and disabling rotator cuff deficiency, RTSA can result in life-changing improvements in pain, motion, function, and patient satisfaction. Level V therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Proposal for SICSeG guidelines for rehabilitation after anatomical shoulder prosthesis in concentric shoulder osteoarthritis.

PubMed

Fusaro, I; Orsini, S; Stignani, S; Creta, D; Cava, F C; Benedetti, M G

2013-06-01

The purpose of this paper is to provide up-to-date guidelines on rehabilitation after anatomical shoulder prosthesis for concentric shoulder osteoarthritis, as previous guidelines date back to late 1970s and are no longer adequate due to the evolution of prosthesis models and surgical techniques. The physiatric committee of the Italian Society of Shoulder and Elbow Surgery (SICSeG-Società Italiana di Chirurgia della Spalla e del Gomito) performed a search for all the existing literature related to rehabilitation after shoulder replacement. A total of 29 papers concerning shoulder rehabilitation were reviewed. In addition, the main Italian orthopedic surgeons and physiatrists dealing with shoulder surgery and rehabilitation were interviewed to obtain indications when literature was not conclusive. From literature evaluation and expert consultation, we produced guidelines concerning: patient evaluation by means of adequate rating scales, preoperative treatment, early intermediate and advanced postoperative phases, rehabilitation of scapulo-thoracic joint, return to work and sports, length of rehabilitation and follow-up. This proposal for guidelines was presented during the 11th SICSeG Congress on May 2012 and to the main scientific societies concerned in shoulder surgery and rehabilitation. A consensus conference is needed in order to formalize and make them usable from all the professional figures involved in this field.

Reverse shoulder arthroplasty leads to significant biomechanical changes in the remaining rotator cuff.

PubMed

Herrmann, Sebastian; König, Christian; Heller, Markus; Perka, Carsten; Greiner, Stefan

2011-08-16

After reverse shoulder arthroplasty (RSA) external and internal rotation will often remain restricted. A postoperative alteration of the biomechanics in the remaining cuff is discussed as a contributing factor to these functional deficits. In this study, muscle moment arms as well as origin-to-insertion distance (OID) were calculated using three-dimensional models of the shoulder derived from CT scans of seven cadaveric specimens. Moment arms for humeral rotation are significantly smaller for the cranial segments of SSC and all segments of TMIN in abduction angles of 30 degrees and above (p ≤ 0.05). Abduction moment arms were significantly decreased for all segments (p ≤ 0.002). OID was significantly smaller for all muscles at the 15 degree position (p ≤ 0.005), apart from the cranial SSC segment. Reduced rotational moment arms in conjunction with the decrease of OID may be a possible explanation for the clinically observed impaired external and internal rotation.

The effects of progressive lateralization of the joint center of rotation of reverse total shoulder implants.

PubMed

Costantini, Oren; Choi, Daniel S; Kontaxis, Andreas; Gulotta, Lawrence V

2015-07-01

There has been a renewed interest in lateralizing the center of rotation (CoR) in implants used in reverse shoulder arthroplasty. The aim of this study was to determine the sensitivity of lateralization of the CoR on the glenohumeral joint contact forces, muscle moment arms, torque across the bone-implant interface, and the stability of the implant. A 3-dimensional virtual model was used to investigate how lateralization affects deltoid muscle moment arm and glenohumeral joint contact forces. This model was virtually implanted with 5 progressively lateralized reverse shoulder prostheses. The joint contact loads and deltoid moment arms were calculated for each lateralization over the course of 3 simulated standard humerothoracic motions. Lateralization of the CoR leads to an increase in the overall joint contact forces across the glenosphere. Most of this increased loading occurred through compression, although increases in anterior/posterior and superior/inferior shear were also observed. Moment arms of the deltoid consistently decreased with lateralization. Bending moments at the implant interface increased with lateralization. Progressive lateralization resulted in improved stability ratios. Lateralization results in increased joint loading. Most of that loading occurs through compression, although there were also increases in shear forces. Anterior/posterior shear is currently not accounted for in implant fixation studies, leaving its effect on implant fixation unknown. Future studies should incorporate shear forces into their models to more accurately assess fixation methods. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Understanding the Importance of the Teres Minor for Shoulder Function: Functional Anatomy and Pathology.

PubMed

Williams, Matthew D; Edwards, Thomas Bradley; Walch, Gilles

2018-03-01

Although the teres minor is often overlooked in a normal shoulder, it becomes a key component in maintaining shoulder function when other rotator cuff tendons fail. The teres minor maintains a balanced glenohumeral joint and changes from an insignificant to the most significant external rotator in the presence of major rotator cuff pathology. The presence or absence of the teres minor provides prognostic information on the outcomes of reverse total shoulder arthroplasty and tendon transfers. Clinical tests include the Patte test, the Neer dropping sign, the external rotation lag sign, and the Hertel drop sign. Advanced imaging of the teres minor can be used for classification using the Walch system. Understanding the function and pathology surrounding the teres minor is paramount in comprehensive management of the patient with shoulder pathology. Appropriate clinical examination and imaging of the teres minor are important for preoperative stratification and postoperative expectations.

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis.

PubMed

Terrier, A; Kochbeck, S H; Merlini, F; Gortchacow, M; Pioletti, D P; Farron, A

2010-07-01

Reversed shoulder arthroplasty is an accepted treatment for glenohumeral arthritis associated to rotator cuff deficiency. For most reversed shoulder prostheses, the baseplate of the glenoid component is uncemented and its primary stability is provided by a central peg and peripheral screws. Because of the importance of the primary stability for a good osteo-integration of the baseplate, the optimal fixation of the screws is crucial. In particular, the amplitude of the tightening force of the nonlocking screws is clearly associated to this stability. Since this force is unknown, it is currently not accounted for in experimental or numerical analyses. Thus, the primary goal of this work is to measure this tightening force experimentally. In addition, the tightening torque was also measured, to estimate an optimal surgical value. An experimental setup with an instrumented baseplate was developed to measure simultaneously the tightening force, tightening torque and screwing angle, of the nonlocking screws of the Aquealis reversed prosthesis. In addition, the amount of bone volume around each screw was measured with a micro-CT. Measurements were performed on 6 human cadaveric scapulae. A statistically correlated relationship (p<0.05, R=0.83) was obtained between the maximal tightening force and the bone volume. The relationship between the tightening torque and the bone volume was not statistically significant. The experimental relationship presented in this paper can be used in numerical analyses to improve the baseplate fixation in the glenoid bone. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Cadaveric and three-dimensional computed tomography study of the morphology of the scapula with reference to reversed shoulder prosthesis

PubMed Central

Torrens, Carlos; Corrales, Monica; Gonzalez, Gemma; Solano, Alberto; Cáceres, Enrique

2008-01-01

Purpose The purpose of this study is to analyze the morphology of the scapula with reference to the glenoid component implantation in reversed shoulder prosthesis, in order to improve primary fixation of the component. Methods Seventy-three 3-dimensional computed tomography of the scapula and 108 scapular dry specimens were analyzed to determine the anterior and posterior length of the glenoid neck, the angle between the glenoid surface and the upper posterior column of the scapula and the angle between the major craneo-caudal glenoid axis and the base of the coracoid process and the upper posterior column. Results The anterior and posterior length of glenoid neck was classified into two groups named "short-neck" and "long-neck" with significant differences between them. The angle between the glenoid surface and the upper posterior column of the scapula was also classified into two different types: type I (mean 50°–52°) and type II (mean 62,50°–64°), with significant differences between them (p < 0,001). The angle between the major craneo-caudal glenoid axis and the base of the coracoid process averaged 18,25° while the angle with the upper posterior column of the scapula averaged 8°. Conclusion Scapular morphological variability advices for individual adjustments of glenoid component implantation in reversed total shoulder prosthesis. Three-dimensional computed tomography of the scapula constitutes an important tool when planning reversed prostheses implantation. PMID:18847487

Cadaveric and three-dimensional computed tomography study of the morphology of the scapula with reference to reversed shoulder prosthesis.

PubMed

Torrens, Carlos; Corrales, Monica; Gonzalez, Gemma; Solano, Alberto; Cáceres, Enrique

2008-10-10

The purpose of this study is to analyze the morphology of the scapula with reference to the glenoid component implantation in reversed shoulder prosthesis, in order to improve primary fixation of the component. Seventy-three 3-dimensional computed tomography of the scapula and 108 scapular dry specimens were analyzed to determine the anterior and posterior length of the glenoid neck, the angle between the glenoid surface and the upper posterior column of the scapula and the angle between the major craneo-caudal glenoid axis and the base of the coracoid process and the upper posterior column. The anterior and posterior length of glenoid neck was classified into two groups named "short-neck" and "long-neck" with significant differences between them. The angle between the glenoid surface and the upper posterior column of the scapula was also classified into two different types: type I (mean 50 degrees-52 degrees ) and type II (mean 62.50 degrees-64 degrees ), with significant differences between them (p < 0.001). The angle between the major craneo-caudal glenoid axis and the base of the coracoid process averaged 18,25 degrees while the angle with the upper posterior column of the scapula averaged 8 degrees . Scapular morphological variability advices for individual adjustments of glenoid component implantation in reversed total shoulder prosthesis. Three-dimensional computed tomography of the scapula constitutes an important tool when planning reversed prostheses implantation.

Biomechanical effects of humeral neck-shaft angle and subscapularis integrity in reverse total shoulder arthroplasty.

PubMed

Oh, Joo Han; Shin, Sang-Jin; McGarry, Michelle H; Scott, Jonathan H; Heckmann, Nathanael; Lee, Thay Q

2014-08-01

The variability in functional outcomes and the occurrence of scapular notching and instability after reverse total shoulder arthroplasty remain problems. The objectives of this study were to measure the effect of reverse humeral component neck-shaft angle on impingement-free range of motion, abduction moment, and anterior dislocation force and to evaluate the effect of subscapularis loading on dislocation force. Six cadaveric shoulders were tested with 155°, 145°, and 135° reverse shoulder humeral neck-shaft angles. The adduction angle at which bone contact occurred and the internal and external rotational impingement-free range of motion angles were measured. Glenohumeral abduction moment was measured at 0° and 30° of abduction, and anterior dislocation forces were measured at 30° of internal rotation, 0°, and 30° of external rotation with and without subscapularis loading. Adduction deficit angles for 155°, 145°, and 135° neck-shaft angle were 2° ± 5° of abduction, 7° ± 4° of adduction, and 12° ± 2° of adduction (P < .05). Impingement-free angles of humeral rotation and abduction moments were not statistically different between the neck-shaft angles. The anterior dislocation force was significantly higher for the 135° neck-shaft angle at 30° of external rotation and significantly higher for the 155° neck-shaft angle at 30° of internal rotation (P < .01). The anterior dislocation forces were significantly higher when the subscapularis was loaded (P < .01). The 155° neck-shaft angle was more prone to scapular bone contact during adduction but was more stable at the internally rotated position, which was the least stable humeral rotation position. Subscapularis loading gave further anterior stability with all neck-shaft angles at all positions. Published by Mosby, Inc.

Patient-specific targeting guides compared with traditional instrumentation for glenoid component placement in shoulder arthroplasty: a multi-surgeon study in 70 arthritic cadaver specimens.

PubMed

Throckmorton, Thomas W; Gulotta, Lawrence V; Bonnarens, Frank O; Wright, Stephen A; Hartzell, Jeffrey L; Rozzi, William B; Hurst, Jason M; Frostick, Simon P; Sperling, John W

2015-06-01

The purpose of this study was to compare the accuracy of patient-specific guides for total shoulder arthroplasty (TSA) with traditional instrumentation in arthritic cadaver shoulders. We hypothesized that the patient-specific guides would place components more accurately than standard instrumentation. Seventy cadaver shoulders with radiographically confirmed arthritis were randomized in equal groups to 5 surgeons of varying experience levels who were not involved in development of the patient-specific guidance system. Specimens were then randomized to patient-specific guides based off of computed tomography scanning, standard instrumentation, and anatomic TSA or reverse TSA. Variances in version or inclination of more than 10° and more than 4 mm in starting point were considered indications of significant component malposition. TSA glenoid components placed with patient-specific guides averaged 5° of deviation from the intended position in version and 3° in inclination; those with standard instrumentation averaged 8° of deviation in version and 7° in inclination. These differences were significant for version (P = .04) and inclination (P = .01). Multivariate analysis of variance to compare the overall accuracy for the entire cohort (TSA and reverse TSA) revealed patient-specific guides to be significantly more accurate (P = .01) for the combined vectors of version and inclination. Patient-specific guides also had fewer instances of significant component malposition than standard instrumentation did. Patient-specific targeting guides were more accurate than traditional instrumentation and had fewer instances of component malposition for glenoid component placement in this multi-surgeon cadaver study of arthritic shoulders. Long-term clinical studies are needed to determine if these improvements produce improved functional outcomes. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Effect of lateral offset center of rotation in reverse total shoulder arthroplasty: a biomechanical study.

PubMed

Henninger, Heath B; Barg, Alexej; Anderson, Andrew E; Bachus, Kent N; Burks, Robert T; Tashjian, Robert Z

2012-09-01

Lateral offset center of rotation (COR) reduces the incidence of scapular notching and potentially increases external rotation range of motion (ROM) after reverse total shoulder arthroplasty (rTSA). The purpose of this study was to determine the biomechanical effects of changing COR on abduction and external rotation ROM, deltoid abduction force, and joint stability. A biomechanical shoulder simulator tested cadaveric shoulders before and after rTSA. Spacers shifted the COR laterally from baseline rTSA by 5, 10, and 15 mm. Outcome measures of resting abduction and external rotation ROM, and abduction and dislocation (lateral and anterior) forces were recorded. Resting abduction increased 20° vs native shoulders and was unaffected by COR lateralization. External rotation decreased after rTSA and was unaffected by COR lateralization. The deltoid force required for abduction significantly decreased 25% from native to baseline rTSA. COR lateralization progressively eliminated this mechanical advantage. Lateral dislocation required significantly less force than anterior dislocation after rTSA, and both dislocation forces increased with lateralization of the COR. COR lateralization had no influence on ROM (adduction or external rotation) but significantly increased abduction and dislocation forces. This suggests the lower incidence of scapular notching may not be related to the amount of adduction deficit after lateral offset rTSA but may arise from limited impingement of the humeral component on the lateral scapula due to a change in joint geometry. Lateralization provides the benefit of increased joint stability, but at the cost of increasing deltoid abduction forces. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Reverse shoulder arthroplasty for massive rotator cuff tear: risk factors for poor functional improvement.

PubMed

Hartzler, Robert U; Steen, Brandon M; Hussey, Michael M; Cusick, Michael C; Cottrell, Benjamin J; Clark, Rachel E; Frankle, Mark A

2015-11-01

Some patients unexpectedly have poor functional improvement after reverse shoulder arthroplasty (RSA) for massive rotator cuff tear without glenohumeral arthritis. Our aim was to identify risk factors for this outcome. We also assessed the value of RSA for cases with poor functional improvement vs. The study was a retrospective case-control analysis for primary RSA performed for massive rotator cuff tear without glenohumeral arthritis with minimum 2-year follow-up. Cases were defined as Simple Shoulder Test (SST) score improvement of ≤1, whereas controls improved SST score ≥2. Risk factors were chosen on the basis of previous association with poor outcomes after shoulder arthroplasty. Latissimus dorsi tendon transfer results were analyzed as a subgroup. Value was defined as improvement in American Shoulder and Elbow Surgeons (ASES) score per $10,000 hospital cost. In a multivariate binomial logistic regression analysis, neurologic dysfunction (P = .006), age <60 years (P = .02), and high preoperative SST score (P = .03) were independently associated with poor functional improvement. Latissimus dorsi tendon transfer patients significantly improved in active external rotation (-0.3° to 38.7°; P < .01). The value of RSA (ΔASES/$10,000 cost) for cases was 0.8 compared with 17.5 for controls (P < .0001). Young age, high preoperative function, and neurologic dysfunction were associated with poor functional improvement. Surgeons should consider these associations in counseling and selection of patients. Concurrent latissimus dorsi transfer was successful in restoring active external rotation in a subgroup of patients. The critical economic importance of improved patient selection is emphasized by the very low value of the procedure in the case group. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Clinical Outcomes and Complications during the Learning Curve for Reverse Total Shoulder Arthroplasty: An Analysis of the First 40 Cases

PubMed Central

Song, Kwang-Soon; Koo, Tae-Won

2017-01-01

Background The purpose of this study was to investigate the results and complications during the learning curve of reverse total shoulder arthroplasty (RTSA) for rotator cuff deficiency. Methods We retrospectively reviewed the first 40 cases of RTSA performed by a single surgeon. The mean age of patients was 72.7 years (range, 63 to 81 years) and mean follow-up period was 26.7 months (range, 9 to 57 months). Clinical outcomes were evaluated using a visual analog scale (VAS) for pain, the University of California at Los Angeles (UCLA) shoulder score, American Shoulder and Elbow Surgeon (ASES) score, subjective shoulder value (SSV), and active range of motion (ROM). Intraoperative and postoperative complications were also evaluated. Results The average VAS pain score, UCLA score, ASES score, and SSV improved from 6.9%, 12.8%, 29.0%, and 29.0% before surgery to 1.6%, 27.0%, 73.3%, and 71.5% after surgery, respectively (p < 0.001). The mean forward flexion, abduction, and external rotation improved from 68.0°, 56.9°, and 28.0° before surgery to 131.0°, 112.3°, and 38.8° after surgery, respectively (p < 0.001, p < 0.001, and p = 0.021). However, the mean internal rotation did not improve after surgery (p = 0.889). Scapular notching was observed in 33 patients (51.5%). Eight shoulders (20%) had complications, including 2 major (1 deep infection and 1 glenoid fixation failure) and 6 minor complications (3 brachial plexus injuries, 2 acromial fractures, and 1 intraoperative periprosthetic fracture). Conclusions The first 40 cases of RTSA performed by a single surgeon during the learning curve period showed satisfactory short-term follow-up results with an acceptable complication rate. PMID:28567225

Shoulder arthroplasty for sequelae of poliomyelitis.

PubMed

Werthel, Jean-David; Schoch, Bradley; Sperling, John W; Cofield, Robert; Elhassan, Bassem T

2016-05-01

Polio infection can often lead to orthopedic complications such as arthritis, osteoporosis, muscle weakness, skeletal deformation, and chronic instability of the joints. The purpose of this study was to assess the outcomes and associated complications of arthroplasty in shoulders with sequelae of poliomyelitis. Seven patients (average age, 70 years) were treated between 1976 and 2013 with shoulder arthroplasty for the sequelae of polio. One patient underwent reverse shoulder arthroplasty, 2 had a hemiarthroplasty, and 4 had total shoulder arthroplasty. Average follow-up was 87 months. Outcome measures included pain, range of motion, and postoperative modified Neer ratings. Overall pain scores improved from 5 to 1.6 points (on a 5-point scale) after shoulder arthroplasty. Six shoulders had no or mild pain at latest follow-up, and 6 shoulders rated the result as much better or better. Mean shoulder elevation improved from 72° to 129°, and external rotation improved from 11° to 56°. Average strength in elevation decreased from 3.9 to 3.4 postoperatively, and external rotation strength decreased from 3.9 to 3.3. This, however, did not reach significance. Evidence of muscle imbalance with radiographic instability was found in 4 shoulders that demonstrated superior subluxation, anterior subluxation, or both. This remained asymptomatic. No shoulder required revision or reoperation. Shoulder arthroplasty provides significant pain relief and improved motion in patients with sequelae of poliomyelitis. Muscle weakness may be responsible for postoperative instability, and careful selection of the patient with good upper extremity muscles must be made. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Avoiding superior tilt in reverse shoulder arthroplasty: a review of the literature and technical recommendations.

PubMed

Laver, Lior; Garrigues, Grant E

2014-10-01

Superior tilt of the baseplate component in reverse total shoulder arthroplasty leads to tensile baseplate forces and may be a contributor to early loosening. The risk factors for this implant malposition include inadequate exposure through a superior approach and superior glenoid bone deficiency that obscures the native glenoid tilt. Here we review our preoperative evaluation and surgical management strategies to avoid superior tilt. Adequate exposure with a superior approach can be achieved but requires not just proper surgical technique but also careful patient selection. We propose that the superior approach be considered only for acute proximal humerus fractures or in patients when the following criteria are met: no prior open surgery on the shoulder; more than 30° of passive external rotation at 0° of abduction; no medial humeral osteophytes; and any superior migration must be reducible with a sulcus test during examination under anesthesia. Avoiding superior tilt when there is significant superior glenoid erosion can be accomplished with humeral head autograft, most easily performed through a deltopectoral approach. Preoperative templating is critical to determine proper graft thickness, inclination, reaming depth, and harvest technique. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Latissimus Dorsi and Teres Major Transfer With Reverse Shoulder Arthroplasty Restores Active Motion and Reduces Pain for Posterosuperior Cuff Dysfunction.

PubMed

Shi, Lewis L; Cahill, Kirk E; Ek, Eugene T; Tompson, Jeffrey D; Higgins, Laurence D; Warner, Jon J P

2015-10-01

In patients with rotator cuff dysfunction, reverse shoulder arthroplasty can restore active forward flexion, but it does not provide a solution for the lack of active external rotation because of infraspinatus and the teres minor dysfunction. A modified L'Episcopo procedure can be performed in the same setting wherein the latissimus dorsi and teres major tendons are transferred to the lateral aspect of proximal humerus in an attempt to restore active external rotation. (1) Do latissimus dorsi and teres major tendon transfers with reverse shoulder arthroplasty improve external rotation function in patients with posterosuperior rotator cuff dysfunction? (2) Do patients experience less pain and have improved outcome scores after surgery? (3) What are the complications associated with reverse shoulder arthroplasty with latissimus dorsi and teres major transfer? Between 2007 and 2010, we treated all patients undergoing shoulder arthroplasty who had a profound external rotation lag sign and advanced fatty degeneration of the posterosuperior rotator cuff (infraspinatus plus teres minor) with this approach. A total of 21 patients (mean age 66 years; range, 58-82 years) were treated this way and followed for a minimum of 2 years (range, 26-81 months); none was lost to followup, and all have been seen in the last 5 years. We compared pre- and postoperative ranges of motion, pain, and functional status; scores were drawn from chart review. We also categorized major and minor complications. Active forward flexion improved from 56° ± 36° to 120° ± 38° (mean difference: 64° [95% confidence interval {CI}, 45°-83°], p < 0.001). Active external rotation with the arm adducted improved from 6° ± 16° to 38° ± 14° (mean difference: 30° [95% CI, 21°-39°], p < 0.001); active external rotation with the arm abducted improved from 19° ± 25° to 74° ± 22° (mean difference: 44° [95% CI, 22°-65°], p < 0.001). Pain visual analog score improved from 8.4 ± 2.3 to 1.7 ± 2.1 (mean difference: -6.9 [95% CI, -8.7 to -5.2], p < 0.001), and Single Assessment Numeric Evaluation score improved from 28% ± 21% to 80% ± 24% (mean difference: 46% [95% CI, 28%-64%], p < 0.001). There were six major complications, five of which were treated operatively. Overall, three patients' latissimus and teres major transfer failed based on persistent lack of external rotation. In patients with posterior and superior cuff deficiency, reverse shoulder arthroplasty combined with latissimus dorsi and teres major transfer through a single deltopectoral incision can reliably increase active forward flexion and external rotation. Patients experience pain relief and functional improvement but have a high rate of complications; therefore, we recommend the procedure be limited to patients indicated for reverse who have profound external rotation loss and a high grade of infraspinatus/teres minor fatty atrophy. Level IV, therapeutic study.

Patient perception of physician reimbursement in elective shoulder surgery.

PubMed

Nagda, Sameer; Wiesel, Brent; Abboud, Joseph; Salamone, Andrew; Sheth, Neil; Foran, Jared; Garstka, Johnny

2015-01-01

A previous study revealed that patients perceived physician reimbursement to be much higher than current Medicare schedules for hip and knee replacement. The purpose of this study was to evaluate patient perception of surgeon reimbursement for total shoulder replacement (TSA) and rotator cuff repair (RCR). The study surveyed 250 patients. Patients were asked what they believe a surgeon should be reimbursed for performing TSA and RCR. Patients were then asked to estimate what Medicare reimbursed for each of these procedures. We then revealed the Medicare reimbursement rate for TSA and RCR, and patients were asked to comment. Finally, patients were asked whether surgeons with advanced shoulder training should receive additional payments. Patients thought that surgeons should receive $13,178 for TSA and $8459 for RCR. Patients estimated actual Medicare reimbursement was $7177 for TSA and $4692 for RCR. Eighty percent of patients stated that Medicare reimbursement was too low for TSA, 75% thought that payment for RCR was lower than what it should be. Less than 1% of patients felt that it was higher than it should be. A total of 87% of patients thought that surgeons with advanced shoulder training should be reimbursed at a higher rate. Patients perceived the values of TSA and RCR were much higher than current Medicare schedules. This is in agreement with prior surveys. Continued decreases in Medicare reimbursements may force surgeons to not participate in Medicare and create a potential access issue. Further investigation should focus on identifying how many surgeons may opt out. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

A Scott bench with ergonomic thorax stabilisation pad improves body posture during preacher arm curl exercise.

PubMed

Biscarini, Andrea; Benvenuti, Paolo; Busti, Daniele; Zanuso, Silvano

2016-05-01

We assessed whether the use of an ergonomic thorax stabilisation pad, during the preacher arm curl exercise, could significantly reduce the excessive shoulder protraction and thoracic kyphosis induced by the standard flat pad built into the existing preacher arm curl equipment. A 3D motion capture system and inclinometers were used to measure shoulder protraction and thoracic kyphosis in 15 subjects performing preacher arm curl with a plate-loaded machine provided with the standard flat pad. The same measures were repeated after replacing the flat pad with a new ergonomic pad, specifically designed to accommodate the thorax profile and improve body posture. Pad replacement significantly (p < 0.001) reduced shoulder protraction (from [Formula: see text] to [Formula: see text]) and thoracic kyphosis (from [Formula: see text] to [Formula: see text]), enabling postural and functional improvements within the entire spine, shoulder girdle and rib cage. The ergonomic pad may potentially allow a more effective training, prevent musculoskeletal discomfort and reduce the risk of injury. Practitioner summary: We have designed an ergonomic thorax stabilisation pad for the preacher arm curl exercise. The new ergonomic pad improves the poor posture conditions induced by the standard flat pad and may potentially allow a more effective training, prevent musculoskeletal discomfort, improve the breathing function and reduce the risk of injury.

Reverse shoulder arthroplasty in young patient with achondroplasia - Ten year follow up: Case report.

PubMed

van den Broek, M; Verborgt, O; Declercq, G

2017-11-01

Skeletal dysplasia in achondroplasia can affect all body joints - including the glenohumeral joint - and is prone to develop to degenerative osteoarthritis (OA). This may cause pain and mobility problems at young age. Surgical treatment is challenging due to the dysplastic anatomy of the shoulder joint - with a dysplastic deformed short humerus, a small, hypoplastic medialized glenoid and lateralized acromion - and the long life expectancy of these patients. The indications for reverse shoulder arthroplasty (RSA) evolved during years with rotator cuff tears and rotator cuff arthropathy in combination with or without glenohumeral OA as the main indicator, with good short to mid-term results. Long term results of RSA are rarely found in literature, especially in young patients. The use of a RSA in glenohumeral OA with an intact rotator cuff has rarely been reported. In this case report we present the ten-year clinical and radiographic results of a RSA for the treatment of degenerative OA with glenohumeral dysplasia in a young patient with achondroplasia. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Clinical and radiological outcomes after reverse shoulder arthroplasty in patients with failed deltoid or latissimus dorsi transfers. A review of ten cases.

PubMed

Valenti, Philippe; Maqdes, Ali; Werthel, Jean-David

2017-10-01

The purpose of this study was to report clinical and radiological results of reverse shoulder arthroplasty (RSA) after failure of either a deltoid and/or a latissimus dorsi transfer. Between 2001 and 2011, ten patients (average age, 61 years) underwent primary RSA after a failed tendon transfer for irreparable postero-superior rotator cuff tear (five deltoid muscle transfers, four latissimus dorsi transfers and one both). Average follow-up was 48 months. Outcome measures included pain, range of motion and postoperative Constant-Murley score. Pain score improved significantly from a mean 8.3 to a mean 0.3. Mean shoulder elevation improved from 66 to 134°, and absolute Constant-Murley scores increased from 25.8 to 62.8 The mean improvement in external rotation was limited to 7.5°. Subjectively, six patients rated the result as much better and three rated it as better than before surgery. Failure of the tendon transfer with deterioration of the functional outcomes can be salvaged with a RSA with no impact on the expected outcome.

Factors affecting the stability of reverse shoulder arthroplasty: a biomechanical study.

PubMed

Clouthier, Allison L; Hetzler, Markus A; Fedorak, Graham; Bryant, J Tim; Deluzio, Kevin J; Bicknell, Ryan T

2013-04-01

Despite the success of reverse shoulder arthroplasty (RSA) in treating patients with painful pseudoparalytic shoulders, instability is a common complication and currently the factors affecting stability are not well understood. The objective of this study was to investigate a number of factors as well as the interactions between factors to determine how they affect the stability of the prosthesis. These factors included: active arm posture (abduction and abduction plane angles), loading direction, glenosphere diameter and eccentricity, and humeral socket constraint. Force required to dislocate the joint, determined using a biomechanical shoulder simulator, was used as a measure of stability. A factorial design experiment was implemented to examine the factors and interactions. Actively increasing the abduction angle by 15° leads to a 30% increase in stability and use of an inferior-offset rather than a centered glenosphere improved stability by 17%. Use of a more constrained humeral socket also increased stability; but the effect was dependent on loading direction, with a 88% improvement for superior loading, 66% for posterior, 36% for anterior, and no change for inferior loading. Abduction plane angle and glenosphere diameter had no effect on stability. Increased glenohumeral abduction and the use of an inferior-offset glenosphere were found to increase the stability of RSA. Additionally, use of a more constrained humeral socket increased stability for anterior, posterior, and superior loading. These identified factor effects have the potential to decrease the risk of dislocation following RSA. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Shoulder Arthroplasty for Sequelae of Obstetrical Brachial Plexus Injury.

PubMed

Werthel, Jean-David; Schoch, Bradley; Frankle, Mark; Cofield, Robert; Elhassan, Bassem T

2018-03-29

Shoulder arthroplasty following obstetrical brachial plexus injury (OBPI) is technically challenging because glenoid morphology, muscle balance, and humeral version are substantially altered compared with the neurologically intact shoulder. The purpose of this study is to report the outcome of shoulder arthroplasty in a group of patients with end-stage arthritis secondary to OBPI. Seven patients with OBPI and secondary glenohumeral arthritis were treated with shoulder arthroplasty between 1976 and 2014. Two underwent hemiarthroplasty (HA), 2 underwent total shoulder arthroplasty (TSA), and 3 underwent reverse shoulder arthroplasty (RSA). One HA was lost to follow-up and was excluded. The remaining 6 patients (mean age, 62.5 years old at the time of surgery) were followed for a minimum of 2 years (mean, 7.5 years; range, 2-13 years) Outcome measures included pain, range of motion, and postoperative modified Neer ratings. Pain improved in all shoulders. Mean forward flexion was unchanged. No shoulders treated with HA/TSA regained forward elevation above 90°, compared with 1 out of the 3 RSAs. External rotation improved from a mean of -10° to 20°. Active internal rotation decreased from L1 to L5. Immediate postoperative radiographs showed either severe posterior or posterosuperior subluxation in all 3 patients treated with nonconstrained implants. Shoulder arthroplasty is an acceptable option to relieve pain in patients with symptomatic shoulder arthritis as a sequel of OBPI. However, range of motion improvements are not expected. Therapeutic V. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Reverse total shoulder glenoid baseplate stability with superior glenoid bone loss.

PubMed

Martin, Elise J; Duquin, Thomas R; Ehrensberger, Mark T

2017-10-01

Superior wear of the glenoid bone is common in patients with rotator cuff arthropathy. This can become a treatment challenge for patients who require shoulder arthroplasty. In reverse shoulder arthroplasty (RSA), glenoid bone loss may affect the stability of baseplate fixation. The primary purpose of this biomechanical laboratory study was to assess the initial fixation stability of RSA glenosphere baseplates in the presence of variable amounts of superior glenoid bone loss. High-density solid rigid polyurethane foam (30 pounds/cubic foot) was machined to model the glenoid with variable superior defects that provided different levels of support (100%, 90%, 75%, and 50%) for the glenosphere baseplate. The samples were cyclically loaded (0-750 N at 1 Hz for 5000 cycles) at a 60° glenohumeral angle. The micromotion and migration of the baseplate were calculated from displacement data captured during the loading tests with an array of 3 linear variable differential transformers mounted around the baseplate. Micromotion was significantly greater in samples with 50% defects compared with those with smaller defects. Migration was significantly greater after testing for all defect sizes. Initial fixation of RSA glenosphere baseplates was significantly reduced in models with 50% bone loss on the superior edge compared with models with less bone loss in this high-density bone foam model. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Patient-specific instrumentation for total shoulder arthroplasty

PubMed Central

Gomes, Nuno Sampaio

2016-01-01

Shoulder arthroplasty is a demanding procedure with a known complication rate. Most complications are associated with the glenoid component, a fact that has stimulated investigation into that specific component of the implant. Avoiding glenoid component malposition is very important and is a key reason for recent developments in pre-operative planning and instrumentation to minimise risk. Patient-specific instrumentation (PSI) was developed as an alternative to navigation systems, originally for total knee arthroplasty, and is a valid option for shoulder replacements today. It offers increased accuracy in the placement of the glenoid component, which improves the likelihood of an optimal outcome. A description of the method of pre-operative planning and surgical technique is presented, based on the author’s experience and a review of the current literature. Cite this article: Gomes N. Patient-specific instrumentation for total shoulder arthroplasty. EFORT Open Rev 2016;1:177-182. DOI: 10.1302/2058-5241.1.000033. PMID:28461945

Patch-Augmented Rotator Cuff Repair and Superior Capsule Reconstruction

PubMed Central

Petri, M.; Greenspoon, J.A.; Moulton, S.G.; Millett, P.J.

2016-01-01

Background: Massive rotator cuff tears in active patients with minimal glenohumeral arthritis remain a particular challenge for the treating surgeon. Methods: A selective literature search was performed and personal surgical experiences are reported. Results: For patients with irreparable rotator cuff tears, a reverse shoulder arthroplasty or a tendon transfer are often performed. However, both procedures have rather high complication rates and debatable long-term results, particularly in younger patients. Therefore, patch-augmented rotator cuff repair or superior capsule reconstruction (SCR) have been recently developed as arthroscopically applicable treatment options, with promising biomechanical and early clinical results. Conclusion: For younger patients with irreparable rotator cuff tears wishing to avoid tendon transfers or reverse total shoulder arthroplasty, both patch-augmentation and SCR represent treatment options that may delay the need for more invasive surgery. PMID:27708733

Influence of glenoid component design and humeral component retroversion on internal and external rotation in reverse shoulder arthroplasty: a cadaver study.

PubMed

Berhouet, J; Garaud, P; Favard, L

2013-12-01

A common disadvantage of reverse shoulder arthroplasty is limitation of the range of arm rotation. Several changes to the prosthesis design and implantation technique have been suggested to improve rotation range of motion (ROM). Glenoid component design and degree of humeral component retroversion influence rotation ROM after reverse shoulder arthroplasty. The Aequalis Reversed™ shoulder prosthesis (Tornier Inc., Edina, MN, USA) was implanted into 40 cadaver shoulders. Eight glenoid component combinations were tested, five with the 36-mm sphere (centred seating, eccentric seating, inferior tilt, centred with a 5-mm thick lateralised spacer, and centred with a 7-mm thick lateralised spacer) and three with the 42-mm sphere (centred with no spacer or with a 7-mm or 10-mm spacer). Humeral component position was evaluated with 0°, 10°, 20°, 30°, and 40° of retroversion. External and internal rotation ROMs to posterior and anterior impingement on the scapular neck were measured with the arm in 20° of abduction. The large glenosphere (42 mm) was associated with significantly (P<0.05) greater rotation ROMs, particularly when combined with a lateralised spacer (46° internal and 66° external rotation). Rotation ROMs were smallest with the 36-mm sphere. Greater humeral component retroversion was associated with a decrease in internal rotation and a significant increase (P<0.05) in external rotation. The best balance between rotation ROMs was obtained with the native retroversion, which was estimated at 17.5° on average in this study. Our anatomic study in a large number of cadavers involved a detailed and reproducible experimental protocol. However, we did not evaluate the variability in scapular anatomy. Earlier studies of the influence of technical parameters did not take humeral component retroversion into account. In addition, no previous studies assessed rotation ROMs. Rotation ROM should be improved by the use of a large-diameter glenosphere with a spacer to lateralise the centre of rotation of the gleno-humeral joint, as well as by positioning the humeral component at the patient's native retroversion value. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Chronic Irreducible Anterior Dislocation of the Shoulder without Significant Functional Deficit.

PubMed

Chung, Hoejeong; Yoon, Yeo-Seung; Shin, Ji-Soo; Shin, John Junghun; Kim, Doosup

2016-09-01

Shoulder dislocation is frequently encountered by orthopedists, and closed manipulation is often sufficient to treat the injury in an acute setting. Although most dislocations are diagnosed and managed promptly, there are rare cases that are missed or neglected, leading to a chronically dislocated state of the joint. They are usually irreducible and cause considerable pain and functional disability in most affected patients, prompting the need to find a surgical method to reverse the worsening conditions caused by the dislocated joint. However, there are cases of even greater rarity in which chronic shoulder dislocations are asymptomatic with minimal functional or structural degeneration in the joint. These patients are usually left untreated, and most show good tolerance to their condition without developing disabling symptoms or significant functional loss over time. We report on one such patient who had a chronic shoulder dislocation for more than 2 years without receiving treatment.

Coordination number constraint models for hydrogenated amorphous Si deposited by catalytic chemical vapour deposition

NASA Astrophysics Data System (ADS)

Kawahara, Toshio; Tabuchi, Norikazu; Arai, Takashi; Sato, Yoshikazu; Morimoto, Jun; Matsumura, Hideki

2005-02-01

We measured structure factors of hydrogenated amorphous Si by x-ray diffraction and analysed the obtained structures using a reverse Monte Carlo (RMC) technique. A small shoulder in the measured structure factor S(Q) was observed on the larger Q side of the first peak. The RMC results with an unconstrained model did not clearly show the small shoulder. Adding constraints for coordination numbers 2 and 3, the small shoulder was reproduced and the agreement with the experimental data became better. The ratio of the constrained coordination numbers was consistent with the ratio of Si-H and Si-H2 bonds which was estimated by the Fourier transformed infrared spectra of the same sample. This shoulder and the oscillation of the corresponding pair distribution function g(r) at large r seem to be related to the low randomness of cat-CVD deposited a-Si:H.

Customized dynamic splinting: orthoses that promote optimal function and recovery after radial nerve injury: a case report.

PubMed

McKee, Pat; Nguyen, Cecilia

2007-01-01

Radial nerve injury is a relatively common occurrence and recovery depends on the level of injury and extent of connective tissue damage. Orthoses (splints) are often provided to compensate for lost motor power. This article chronicles the recovery, over 27 months, of a 76-year-old woman who sustained a high radial nerve injury of her dominant arm during surgery for total shoulder replacement (Delta Reverse). Customized, low-profile dynamic splints, unlike any previously published design, were developed to address her goals for functional independence and the biological needs of the tissues. Dynamic power was provided to the wrist, fingers, and thumb by elastic cords and thin, flexible thermoplastic, without the need of an outrigger, thus avoiding the need for wire bending and cutting. At the outset, the splint was forearm-based and when wrist extension power was recovered, a hand-based splint was designed. Eventually, a circumferential hand-based thumb-stabilizing splint fulfilled most of the remaining orthotic requirements.

Quantifying the competing relationship between adduction range of motion and baseplate micromotion with lateralization of reverse total shoulder arthroplasty.

PubMed

Elwell, Josie; Choi, Joseph; Willing, Ryan

2017-02-08

Lateralizing the center of rotation (COR) of reverse total shoulder arthroplasty (rTSA) could improve functional outcomes and mitigate scapular notching, a commonly occurring complication of the procedure. However, resulting increases in torque at the bone-implant interface may negatively affect initial fixation of the glenoid-side component, especially if only two fixation screws can be placed. Shoulder-specific finite element (FE) models of four fresh-frozen cadaveric shoulders were constructed. Scapular geometry and material property distributions were derived from CT data. Generic baseplates with two and four fixation screws were virtually implanted, after which superiorly-oriented shear loads, accompanied by a compressive load, were applied incrementally further from the glenoid surface to simulate lateralization of the COR. Relationships between lateralization, adduction range of motion (ROM), the number of fixation screws and micromotion of the baseplate (initial implant fixation) were characterized. Lateralization significantly increases micromotion (p=0.015) and adduction ROM (p=0.001). Using two, versus four, baseplate fixation screws significantly increases micromotion (p=0.008). The effect of lateralization and the number of screws on adduction ROM and baseplate fixation is variable on a shoulder-specific basis. Trade-offs exist between functional outcomes, namely adduction ROM, and initial implant fixation and the negative effect of lateralization on implant fixation is amplified when only two fixation screws are used. The possibility of lateralizing the COR in order to improve functional outcomes of the procedure should be considered on a patient-specific basis accounting for factors such as availability and quality of bone stock. Copyright © 2016 Elsevier Ltd. All rights reserved.

Grammont humeral design versus onlay curved-stem reverse shoulder arthroplasty: comparison of clinical and radiographic outcomes with minimum 2-year follow-up.

PubMed

Merolla, Giovanni; Walch, Gilles; Ascione, Francesco; Paladini, Paolo; Fabbri, Elisabetta; Padolino, Antonio; Porcellini, Giuseppe

2018-04-01

There are few investigations comparing lateralized and medialized reverse total shoulder arthroplasty (RTSA) in patients with cuff tear arthropathy. This study assessed the outcomes of 2 RTSA designs. Sixty-eight consecutive cuff tear arthropathy patients (74 shoulders) with a follow-up of at least 24 months received a Grammont or an onlay curved short-stem humeral component, with or without glenoid lateralization; a cementless humeral stem was implanted in >90%. Clinical outcome measures included active range of motion (anterior and lateral elevation, external and internal rotation), pain, and the Constant-Murley score. Radiologic outcomes included radiolucency, condensation lines, cortical thinning, spot weld, loosening and subsidence, and tuberosity resorption for the humeral component and radiolucency, scapular notching, formation of scapular bone spurs, ossifications, and loosening for the glenoid component. Both prostheses provided significant differences between preoperative and postoperative scores and showed a similar complication rate. Scapular fractures were found only in the patients who received the curved short-stem implant. Glenoid bone grafting did not significantly affect clinical scores. Both implants provided similar postoperative shoulder mobility, even though the lateralized curved stem was associated with higher delta scores for external rotation (P = .002) and lower rates of scapular notching (P = .0003), glenoid radiolucency (P = .016), and humeral bone remodeling (P = .004 and P = .030 for cortical thinning and spot weld, respectively). Medialized and short-stem lateralized RTSA implants provided similar midterm clinical outcomes and range of motion. The curved short stem was associated with higher delta scores for external rotation and a lower rate of radiographic risk factors. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Assessment of long-term donor-site morbidity after harvesting the latissimus dorsi flap for neonatal myelomeningocele repair.

PubMed

Osinga, R; Mazzone, L; Meuli, M; Meuli-Simmen, C; von Campe, A

2014-08-01

The latissimus dorsi flap (LDF) has been employed very successfully over decades to cover large soft-tissue defects. Its donor-site morbidity has been extensively investigated in adults - but not in children - and is considered to be nonrestrictive. The aim of this long-term study was to assess donor-site morbidity with the modified Constant score more than 8 years after coverage of large myelomeningocele (MMC) defects with a reverse latissimus dorsi flap. Within the first days after birth, the reverse latissimus dorsi muscle flap was used uni- or bilaterally in three neonates to cover a large MMC defect. Bilateral shoulder function was tested more than 8 years postoperatively according to the modified Constant score. The mean age at follow-up was 11.7 years. None of the patients experienced any pain or shoulder restrictions during normal daily activities. They all managed to position both of their arms comfortably above the head. Forward flexion was normal in all patients as was abduction and external rotation. Dorsal extension was minimally reduced on the operated side. Internal rotation was symmetric in all patients; the extent of active movement varied from excellent to poor. Our long-term data suggest that there is no specific and significant impairment of shoulder function after using the distally pedicled reverse LDF for neonatal MMC repair. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Shoulder Injuries in US Astronauts Related to EVA Suit Design

NASA Technical Reports Server (NTRS)

Scheuring, R. A.; McCulloch, P.; Van Baalen, Mary; Minard, Charles; Watson, Richard; Blatt, T.

2011-01-01

Introduction: For every one hour spent performing extravehicular activity (EVA) in space, astronauts in the US space program spend approximately six to ten hours training in the EVA spacesuit at NASA-Johnson Space Center's Neutral Buoyancy Lab (NBL). In 1997, NASA introduced the planar hard upper torso (HUT) EVA spacesuit which subsequently replaced the existing pivoted HUT. An extra joint in the pivoted shoulder allows increased mobility but also increased complexity. Over the next decade a number of astronauts developed shoulder problems requiring surgical intervention, many of whom performed EVA training in the NBL. This study investigated whether changing HUT designs led to shoulder injuries requiring surgical repair. Methods: US astronaut EVA training data and spacesuit design employed were analyzed from the NBL data. Shoulder surgery data was acquired from the medical record database, and causal mechanisms were obtained from personal interviews Analysis of the individual HUT designs was performed as it related to normal shoulder biomechanics. Results: To date, 23 US astronauts have required 25 shoulder surgeries. Approximately 48% (11/23) directly attributed their injury to training in the planar HUT, whereas none attributed their injury to training in the pivoted HUT. The planar HUT design limits shoulder abduction to 90 degrees compared to approximately 120 degrees in the pivoted HUT. The planar HUT also forces the shoulder into a forward flexed position requiring active retraction and extension to increase abduction beyond 90 degrees. Discussion: Multiple factors are associated with mechanisms leading to shoulder injury requiring surgical repair. Limitations to normal shoulder mechanics, suit fit, donning/doffing, body position, pre-existing injury, tool weight and configuration, age, in-suit activity, and HUT design have all been identified as potential sources of injury. Conclusion: Crewmembers with pre-existing or current shoulder injuries or certain anthropometric body types should conduct NBL EVA training in the pivoted HUT.

Outcomes and Costs of Reverse Shoulder Arthroplasty in the Morbidly Obese: A Case Control Study.

PubMed

Pappou, Ioannis; Virani, Nazeem A; Clark, Rachel; Cottrell, Benjamin J; Frankle, Mark A

2014-07-16

The rising number of morbidly obese patients has important consequences for the health-care system. We investigated the effect of morbid obesity on outcomes, complications, discharge disposition, and costs in patients undergoing reverse shoulder arthroplasty. Our joint registry was searched for all patients who had undergone primary reverse shoulder arthroplasty for a reason other than fracture from 2003 to 2010 and had a minimum of twenty-four months of follow-up. Twenty-one patients with a body mass index (BMI) of ≥40 kg/m 2 were identified (follow-up, 45 ± 16 months; sex, seventeen female and four male; age, 69 ± 7 years) and were compared with sixty-three matched control patients with a BMI of <30 kg/m 2 (follow-up, 48 ± 20 months; sex, fifty female and thirteen male; age, 71 ± 6 years) after an a priori sample size calculation. Outcome instrument data were obtained preoperatively and postoperatively. The Charlson-Deyo comorbidity index (CDI) score, total comorbidities, operative time, blood loss, duration of hospital stay, discharge disposition, costs, and complications were recorded. Compared with nonobese patients, morbidly obese patients had similar improvements in functional outcomes (e.g., American Shoulder and Elbow Surgeons score, 32 to 69 compared with 40 to 78) and in shoulder motion (e.g., forward flexion, 61° to 140° compared with 74° to 153°); all improvements were significant (p < 0.05). Morbidly obese patients had a similar rate of scapular notching (odds ratio [OR] = 0.58, p = 0.63), more total comorbidities excluding obesity (six compared with four, p = 0.001), a higher CDI (2 compared with 1, p = 0.025), and a higher rate of obstructive sleep apnea (OR = 27.7, p = 0.0001). Their operative time was thirteen minutes longer (p = 0.014) and their blood loss was 40 mL greater (p = 0.008). Morbidly obese patients had a similar duration of stay (3.1 compared with 2.6 days, p = 0.823) and hospital readmission rate (OR = 16.3, p = 0.08) but a sixfold higher rate of discharge to rehabilitation facilities rather than to home (OR = 8, p < 0.0001). Hospital costs were higher by $2974 (p = 0.009). The rates of major complications (n = 4 compared with 8, p = 0.479) and of minor complications (n = 3 compared with 14, p = 0.440) were similar. No intraoperative complications or mechanical device failures were noted in either group. Reverse shoulder arthroplasty appears to be as safe and effective in morbidly obese patients, although it has an increased cost and patients have a lower rate of discharge to home and greater care needs after discharge. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence. Copyright © 2014 by The Journal of Bone and Joint Surgery, Incorporated.

Cemented or cementless humeral fixation in reverse total shoulder arthroplasty? a systematic review.

PubMed

Phadnis, J; Huang, T; Watts, A; Krishnan, J; Bain, G I

2016-01-01

To date, there is insufficient evidence available to compare the outcome of cemented and uncemented fixation of the humeral stem in reverse shoulder arthroplasty (RSA). A systemic review comprising 41 clinical studies was performed to compare the functional outcome and rate of complications of cemented and uncemented stems in RSA. These included 1455 cemented and 329 uncemented shoulders. The clinical characteristics of the two groups were similar. Variables were compared using pooled frequency-weighted means and relative risk ratios (RR). Uncemented stems had a significantly higher incidence of early humeral stem migration (p < 0.001, RR 18.1, 95% confidence interval (CI) 5.0 to 65.2) and non-progressive radiolucent lines (p < 0.001, RR 2.4, 95% CI 1.7 to 3.4), but a significantly lower incidence of post-operative fractures of the acromion compared with cemented stems (p = 0.004, RR 14.3, 95% CI 0.9 to 232.8). There was no difference in the risk of stem loosening or revision between the groups. The cemented stems had a greater relative risk of infection (RR 3.3, 95% CI 0.8 to 13.7), nerve injury (RR 5.7, 95% CI 0.7 to 41.5) and thromboembolism (RR 3.9, 95% CI 0.2 to 66.6). The functional outcome and range of movement were equivalent in the two groups. RSA performed with an uncemented stem gives them equivalent functional outcome and a better complication profile than with a cemented stem. The natural history and clinical relevance of early stem migration and radiolucent lines found with uncemented stems requires further long-term study. This study demonstrates that uncemented stems have at least equivalent clinical and radiographic outcomes compared with cemented stems when used for reverse total shoulder arthroplasty. ©2016 The British Editorial Society of Bone & Joint Surgery.

Analysis of a retrieved delta III total shoulder prosthesis.

PubMed

Nyffeler, R W; Werner, C M L; Simmen, B R; Gerber, C

2004-11-01

A reversed Delta III total shoulder prosthesis was retrieved post-mortem, eight months after implantation. A significant notch was evident at the inferior pole of the scapular neck which extended beyond the inferior fixation screw. This bone loss was associated with a corresponding, erosive defect of the polyethylene cup. Histological examination revealed a chronic foreign-body reaction in the joint capsule. There were, however, no histological signs of loosening of the glenoid base plate and the stability of the prosthetic articulation was only slightly reduced by the eroded rim of the cup.

Biomechanical benefits of anterior offsetting of humeral head component in posteriorly unstable total shoulder arthroplasty: A cadaveric study.

PubMed

Kim, Hyun-Min Mike; Chacon, Alexander C; Andrews, Seth H; Roush, Evan P; Cho, Edward; Conaway, William K; Kunselman, Allen R; Lewis, Gregory S

2016-04-01

Restoration of joint stability during total shoulder arthroplasty can be challenging in the face of severe glenoid retroversion. A novel technique of humeral head component anterior-offsetting has been proposed to address posterior instability. We evaluated the biomechanical benefits of this technique in cadaveric specimens. Total shoulder arthroplasty was performed in 14 cadaveric shoulders from 7 donors. Complementary shoulders were assigned to either 10° or 20° glenoid retroversion, with retroversion created by eccentric reaming. Two humeral head component offset positions were tested in each specimen: The anatomic (posterior) and anterior (reverse). With loads applied to the rotator cuff and deltoid, joint contact pressures and the force and energy required for posterior humeral head translation were measured. The force and energy required to displace the humeral head posteriorly increased significantly with the anterior offset position compared to the anatomic offset position. The joint contact pressures were significantly shifted anteriorly, and the joint contact area significantly increased with the anterior offset position. Anterior offsetting of the humeral head component increased the resistance to posterior humeral head translation, shifted joint contact pressures anteriorly, and increased joint contact area, thus, potentially increasing the joint stability in total shoulder arthroplasty with simulated glenoid retroversion. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Stemless shoulder arthroplasty: current status.

PubMed

Churchill, R Sean

2014-09-01

Since the original Neer humeral replacement in the 1950s, the standard primary anatomic total shoulder arthroplasty design has slowly evolved. Most recently, the humeral stem has become progressively shorter to help combat stem-related complications. Currently, there are several companies who have developed and marketed a stemless humeral arthroplasty component. Manufacturers' data for 5 stemless shoulder arthroplasty components currently on the market were analyzed and reviewed. A literature review of short-term results for stemless shoulder arthroplasty was completed. Of the stemless shoulder arthroplasty systems available on the market, 3 are currently undergoing clinical trials in the United States. The Tornier Simpliciti (Tornier, Edina, MN, USA) clinical trial began in 2011. The study with 2-year minimum follow-up results is scheduled for completion in November 2014. The Arthrex Eclipse (Arthrex, Naples, FL, USA) clinical trial was started in January 2013. The tentative study completion date is 2017. The Biomet Nano (Biomet, Warsaw, IN, USA) clinical trial began in October 2013 and also has a tentative completion date of 2017. No other clinical trial is currently under way in the United States. Early results for stemless shoulder arthroplasty indicate clinical results similar to standard stemmed shoulder arthroplasty. Radiographic analysis indicates implant stability without migration or subsidence at 2- to 3-year minimum follow-up.. Several stemless shoulder arthroplasty implants are available outside the United States. Early clinical and radiographic results are promising, but well-designed clinical studies and midterm results are lacking. Three clinical trials are currently under way in the United States with initial availability for use anticipated in 2015. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Low rate of Propionibacterium acnes in arthritic shoulders undergoing primary total shoulder replacement surgery using a strict specimen collection technique.

PubMed

Maccioni, Cristobal B; Woodbridge, Adam B; Balestro, Jean-Christian Y; Figtree, Melanie C; Hudson, Bernard J; Cass, Benjamin; Young, Allan A

2015-08-01

Propionibacterium acnes is a recognized pathogen in postoperative shoulder infections. A recent study reported growth of P acnes in 42% of glenohumeral joints in primary shoulder arthroplasty, concluding that P acnes may cause shoulder osteoarthritis. Whether these results reflect true bacterial infection or specimen contamination is unclear. Our prospective study aimed to determine the rate of P acnes infection in arthritic shoulders using a strict specimen collection technique. We used modified Oxford protocol to collect tissue specimens from the glenohumeral joint of 32 consecutive patients undergoing primary shoulder arthroplasty. Specimens were cultured specifically for P acnes. Diagnosis of P acnes infection required 2 or more positive cultures and histopathology compatible with infection. Three of 32 patients had a positive culture for P acnes. Overall, 3.125% of specimens grew P acnes without histologic evidence of infection. There were no patients with P acnes infection. The difference in culture rates between patients with idiopathic osteoarthritis and those with a predisposing cause for osteoarthritis was not significant. We found a low rate of positive cultures for P acnes, but no P acnes infection and no difference between types of osteoarthritis. These results do not support a cause-and-effect relationship between P acnes and osteoarthritis. The differing results from previous studies are likely explained by our strict specimen collection technique, reflecting different rates of contamination rather than infection. That P acnes contamination occurs in primary shoulder arthroplasty is concerning. Further studies are needed to assess the rates of contamination in shoulder surgery, its clinical effect, and to determine optimal antibiotic prophylaxis. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Towards computer-assisted surgery in shoulder joint replacement

NASA Astrophysics Data System (ADS)

Valstar, Edward R.; Botha, Charl P.; van der Glas, Marjolein; Rozing, Piet M.; van der Helm, Frans C. T.; Post, Frits H.; Vossepoel, Albert M.

A research programme that aims to improve the state of the art in shoulder joint replacement surgery has been initiated at the Delft University of Technology. Development of improved endoprostheses for the upper extremities (DIPEX), as this effort is called, is a clinically driven multidisciplinary programme consisting of many contributory aspects. A part of this research programme focuses on the pre-operative planning and per-operative guidance issues. The ultimate goal of this part of the DIPEX project is to create a surgical support infrastructure that can be used to predict the optimal surgical protocol and can assist with the selection of the most suitable endoprosthesis for a particular patient. In the pre-operative planning phase, advanced biomechanical models of the endoprosthesis fixation and the musculo-skeletal system of the shoulder will be incorporated, which are adjusted to the individual's morphology. Subsequently, the support infrastructure must assist the surgeon during the operation in executing his surgical plan. In the per-operative phase, the chosen optimal position of the endoprosthesis can be realised using camera-assisted tools or mechanical guidance tools. In this article, the pathway towards the desired surgical support infrastructure is described. Furthermore, we discuss the pre-operative planning phase and the per-operative guidance phase, the initial work performed, and finally, possible approaches for improving prosthesis placement.

Glenoid wear after shoulder hemiarthroplasty: quantitative radiographic analysis.

PubMed

Parsons, I M; Millett, Peter J; Warner, Jon J P

2004-04-01

Symptomatic glenoid arthrosis may limit the long-term success of shoulder hemiarthroplasty in patients who are young and functionally demanding. The principal objective of the current study was to quantify glenoid wear after proximal humeral replacement in young, active subjects. Eight patients, ages 21 to 60 years (mean, 45 years), met inclusion criteria. The mean followup was 43 months. Functional scores for the cohort averaged 60% of age and gender-adjusted healthy subjects (range, 28%-84%). Glenohumeral joint space was measured on serial axillary radiographs using a Microscribe 3-DX digitizing device (measurement accuracy, 0.23 mm). Progressive glenoid wear was found in all eight patients. The mean decrease was 2 mm (range, 1.3-2.8 mm), a 68% decrease in glenohumeral joint space. Glenoid cartilage wear also was correlated with Constant and Murley scores. Patients with residual joint spaces less than 1 mm had a mean score of 50%, compared with a score of 71% for patients with joint spaces greater than 1 mm. There were no correlations between wear and mechanism of injury, duration of symptoms, and prior surgery. This study suggests that glenoid cartilage erosion can be expected routinely after humeral head replacement in young, active individuals, and that such wear may adversely affect function or necessitate conversion to total shoulder arthroplasty.

Epidemiologic aspects of shoulder dystocia-related neurological birth injuries.

PubMed

Iffy, Leslie; Varadi, Valeria; Papp, Zoltan

2015-04-01

The first part of the study involved data collection for the detection of geographic variations and chronologic fluctuations in the rates of shoulder dystocia. The second part of the research evaluated head-to-body delivery times in cases of arrest of the shoulders at birth that had resulted in fetal damage during the last four decades in the USA. The study of geographic and chronologic changes in the rates of shoulder dystocia rested on reported statistics coming from the USA and 11 other countries. These data were obtained by computer search. Evaluation of head-to-body delivery times rested on 104 well-documented cases that resulted in permanent neonatal damage. Literary reports of shoulder dystocia indicate that the incidence of shoulder dystocia has increased in the USA about fourfold since the middle of the twentieth century. No comparable trend has been reported from most other countries. Study of head-to-body delivery times revealed that more than two-thirds of all injured fetuses had been extracted from the birth canal within 2 minutes. Incidents of shoulder dystocia began to escalate in the USA during the 1980s, shortly after the introduction of "active management" of the birthing process. This new technique replaced a conservative philosophy which had recommended abstinence from intervention on the part of the accoucheur. The authors consider the interventionist approach largely responsible for the exponential increase in the rates of shoulder dystocia in the USA. They recommend adherence to the traditional method of delivery on the part of obstetricians in Europe and elsewhere.

Return to sport after shoulder arthroplasty: a systematic review and meta-analysis.

PubMed

Liu, Joseph N; Steinhaus, Michael E; Garcia, Grant H; Chang, Brenda; Fields, Kara; Dines, David M; Warren, Russell F; Gulotta, Lawrence V

2018-01-01

With increasing incidence and indications for shoulder arthroplasty, there is an increasing emphasis on the ability to return to sports. The main goal of this study was to determine the rate of return to sport after shoulder arthroplasty. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were followed to perform this systematic review and meta-analysis. A search was performed on MEDLINE, Scopus, EMBASE, and the Cochrane Library. The quality of the included studies was evaluated according to the Methodological Index for Nonrandomized Studies checklist. The main judgement outcome was the rate of return to sports activity after shoulder arthroplasty and the level of play upon return (identical or higher/lower level). Thirteen studies were reviewed, including 944 patients (506 athletes), treated with shoulder arthroplasty at an average follow-up of 5.1 years (range, 0.5-12.6 years). The most common sports were swimming (n = 169), golf (n = 144), fitness sports (n = 71), and tennis (n = 63). The overall rate of return to sport was 85.1% (95% CI, 76.5-92.3%), including 72.3% (95% CI, 60.6-82.8%) returning to an equivalent or improved level of play, after 1-36 months. Patients undergoing anatomic total shoulder arthroplasty returned at a significantly higher rate (92.6%) compared to hemiarthroplasty (71.1%, p = 0.02) or reverse total shoulder arthroplasty (74.9%, p = 0.003). Most patients are able to return to one or more sports following shoulder arthroplasty, with anatomic total shoulder arthroplasty having the highest rate of return. IV.

Effect of baseplate size on primary glenoid stability and impingement-free range of motion in reverse shoulder arthroplasty.

PubMed

Chae, Soo-Won; Kim, Soung-Yon; Lee, Haea; Yon, Joung-Ro; Lee, Juneyoung; Han, Seung-Ho

2014-12-09

Use of a baseplate with a smaller diameter in reverse shoulder arthroplasty is increasing, especially in patients with a small glenoid or glenoid wear. However, the effect of a smaller baseplate on stability of the glenoid component has not been evaluated. Thus, the purpose of this study was to determine whether a smaller baseplate (25 mm) is beneficial to the initial stability of the glenoid component compared to that with a baseplate of a commonly used size (29 mm). Micromotion of glenoid components attached to 14 scapulae of fresh-frozen cadavers was measured and compared between 25- and 29-mm baseplates in biomechanical testing. Impingement-free range of motion in abduction, adduction, internal rotation, and external rotation was evaluated by using a simulated computer model constructed based on the same fresh-frozen cadavers used in biomechanical testing. Micromotion at the inferior third of the glenoid-glenosphere interface was higher in the 29-mm baseplate group than in the 25-mm baseplate group during both 0.7- and 1-body weight cyclic loading in biomechanical testing. Adduction deficit was smaller, and total impingement-free range of motion from abduction to adduction and rotation were greater in the 25-mm baseplate group than in the 29-mm baseplate group in the simulated computer model. Use of a baseplate with a smaller diameter (25 mm) in reverse shoulder arthroplasty is suitable for improving the primary stability of the glenoid component. With a smaller baseplate, impingement-free range of motion is optimized in a smaller glenoid.

Shoulder dystocia and associated manoeuvres as risk factors for perineal trauma.

PubMed

Gauthaman, Nivedita; Walters, Samuel; Tribe, In-Ae; Goldsmith, Louise; Doumouchtsis, Stergios K

2016-04-01

Shoulder dystocia (SD) is an obstetric emergency that can be associated with serious neonatal morbidity and mortality. The aim of this study was to identify the incidence and risk factors for obstetric anal sphincter injuries (OASIS) in women who sustained SD at birth. This was a retrospective observational study over a 5-year period whereby 403 cases of SD were identified. The primary outcome measure was to identify the incidence of OASIS in women with SD. We also evaluated the role of the manoeuvres used for the management of SD and aimed to identify possible correlations between specific manoeuvres and OASIS by univariate and multivariate regression analysis. Shoulder dystocia was associated with a three-fold increase in the risk of OASIS in our population. The use of internal manoeuvres (OR 2.182: 95 % CI 1.173-4.059), an increased number of manoeuvres ≥ 4 (OR 4.667: 95 % CI 1.846-11.795), Woods' screw manoeuvre (OR 3.096: 95 % CI 1.554-6.169), reverse Woods' screw manoeuvre (OR 4.848: 95 % CI 1.647-14.277) and removal of the posterior arm (OR 2.222: 95 % CI 1.117-4.421) were all associated with a significant increase in the likelihood of OASIS. In our study, instrumental deliveries, the use of internal manoeuvres (Woods' screw and reverse Woods' screw) and four or more manoeuvres for the management of SD were independently associated with a higher incidence of OASIS. To effectively manage shoulder dystocia with lower risks of perineal trauma, these factors could be considered when designing further prospective studies and developing management protocols.

The effect of glenosphere diameter in reverse shoulder arthroplasty on muscle force, joint load, and range of motion.

PubMed

Langohr, G Daniel G; Giles, Joshua W; Athwal, George S; Johnson, James A

2015-06-01

Little is known about the effects of glenosphere diameter on shoulder joint loads. The purpose of this biomechanical study was to investigate the effects of glenosphere diameter on joint load, load angle, and total deltoid force required for active abduction and range of motion in internal/external rotation and abduction. A custom, instrumented reverse shoulder arthroplasty implant system capable of measuring joint load and varying glenosphere diameter (38 and 42 mm) and glenoid offset (neutral and lateral) was implanted in 6 cadaveric shoulders to provide at least 80% power for all variables. A shoulder motion simulator was used to produce active glenohumeral and scapulothoracic motion. All implant configurations were tested with active and passive motion with joint kinematics, loads, and moments recorded. At neutral and lateralized glenosphere positions, increasing diameter significantly increased joint load (+12 ± 21 N and +6 ± 9 N; P < .01) and deltoid load required for active abduction (+9 ± 22 N and +11 ± 15 N; P < .02), whereas joint load angle was unaffected (P > .8). Passive internal rotation was reduced with increased diameter at both neutral and lateralized glenosphere positions (-6° ± 6° and -12° ± 6°; P < .002); however, external rotation was not affected (P > .05). At neutral glenosphere position, increasing diameter increased the maximum angles of both adduction (+1° ± 1°; P = .03) and abduction (+8° ± 9°; P < .05). Lateralization also increased abduction range of motion compared with neutral (P < .01). Although increasing glenosphere diameter significantly increased joint load and deltoid force, the clinical impact of these changes is presently unclear. Internal rotation, however, was reduced, which contradicts previous bone modeling studies, which we postulate is due to increased posterior capsular tension as it is forced to wrap around a larger 42 mm implant assembly. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Arthroscopic management of posterior instability: evolution of technique and results.

PubMed

Savoie, Felix H; Holt, M Shaun; Field, Larry D; Ramsey, J Randall

2008-04-01

The purpose of this study was to evaluate the effectiveness of arthroscopic posterior shoulder reconstruction. We treated 136 shoulders in 131 patients with a diagnosis of primary posterior instability who failed 6 months of vigorous rehabilitation by operative stabilization between 1989 and 2001. Inclusion criterion was primary posterior instability that failed an extensive rehabilitative program with functional impairment and pain. Exclusion criterion was less than 12 months of follow-up and Suretac (Smith & Nephew, Andover, MA) or laser stabilization, leaving 92 shoulders in 90 patients available for the study (69 male, 21 female). Follow-up ranged from 12 to 132 months (average, 28 months). Each patient underwent diagnostic arthroscopy and surgical repair at the same time using one of several primary procedures. The procedure used was based on the pathologic entity noted at the time of surgery. At an average follow-up of 28 months, 97% of the shoulders were stable and considered a success based on the Neer-Foster rating scale. Posterior pathology varied, and a reverse Bankart lesion alone was found 51% of the time, a stretched posterior capsule 67% of the time, and a combination of a reverse Bankart lesion and capsular stretching 16% of the time. The rotator interval was obviously damaged in 61% of cases. Multiple accompanying lesions were found, including anterior-superior labral tears and SLAP tears (20%), superior glenohumeral ligament injury (7%), middle glenohumeral ligament injury (38%), anteroinferior glenohumaral ligament injury (37%), and an enlarged axillary pouch (20%). No essential lesion is present for posterior instability. Multiple varied pathologies will be present in a shoulder presenting with posterior instability. Arthroscopic surgery allows inspection of the joint and anatomic-specific repairs based on pathology. Careful attention to all the supporting structures of the shoulder, including the rotator interval, the anterior-superior labrum, and its attached superior glenohumeral ligament, the coracohumeral ligament, the inferior glenohumeral ligament complex, and the infraspinatus, in addition to the posterior labrum and capsule, allows excellent outcomes to be achieved with arthroscopic posterior reconstruction techniques. Level IV, therapeutic case series.

Few geographic and socioeconomic variations exist in primary total shoulder arthroplasty: a multi-level study of Australian registry data.

PubMed

Brennan-Olsen, Sharon L; Page, Richard S; Lane, Stephen E; Lorimer, Michelle; Buchbinder, Rachelle; Osborne, Richard H; Pasco, Julie A; Wluka, Anita E; Sanders, Kerrie M; Ebeling, Peter R; Graves, Stephen E

2016-07-16

Associations between socioeconomic position (SEP) and the uptake of primary total shoulder arthroplasty (TSA) is not well understood in the Australian population, thus potentially limiting equitable allocation of healthcare resources. We used the Australian Orthopaedic Association National Joint Replacement Registry (AOA NJRR) to examine whether geographic or socioeconomic variations exist in TSA performed for a diagnosis of osteoarthritis 2007-11 for all Australians aged ≥40 years. Primary anatomical and reverse TSA data were extracted from the AOA NJRR which captures >99 % of all TSA nationally. Residential addresses were cross-referenced to Australian Bureau of Statistics 2011 Census data to identify SEP measured at the area-level (categorised into deciles), and geographic location defined as Australian State/Territory of residence. We used a Poisson distribution for the number of TSA over the study period, and modelled the effects of age, SEP and geographic location using multilevel modelling. During 2007-11, we observed 6,123 TSA (62.2 % female). For both sexes, TSA showed a proportional increase with advancing age. TSA did not vary by SEP or geographic location, with the exception of greater TSA among men in New South Wales. Using a national registry approach we provide the first reliable picture of TSA at a national level. The uptake of TSA was equitable across SEP; however, there was some variation between the States/Territories. With an aging population, it is imperative that monitoring of major surgical procedures continues, and be focused toward determining whether TSA uptake correlates with need across different social and area-based groups.

Early clinical and radiological outcomes of reverse shoulder arthroplasty with an eccentric all-polyethylene glenosphere to treat failed hemiarthroplasty and the sequelae of proximal humeral fractures.

PubMed

Merolla, Giovanni; Tartarone, Antonio; Sperling, John W; Paladini, Paolo; Fabbri, Elisabetta; Porcellini, Giuseppe

2017-01-01

The aim of this study was to assess the effectiveness of reverse total shoulder arthroplasty (RTSA) with an all-polyethylene glenosphere in patients with failed hemiarthroplasty (HH) or the sequelae of proximal humeral fractures. Thirty-six patients were assessed at a mean follow-up of 36 months using clinical scores and recording shoulder range of movement (ROM). Active anterior elevation (p < 0.001), lateral elevation (p < 0.001) and internal rotation (p < 0.0001) improved significantly, whereas improvement in external rotation was not significant. The mean Constant score rose significantly from 8.5 ± 7.6 to 40.7 ± 15.7 (p < 0.001) and the Simple Shoulder Test score from 0.42 ± 0.85 to 5.5 ± 2.6 (p < 0.001). Pain improved significantly from 8.7 ± 0.9 to 2.3 ± 1.2 (p < 0.001). Implant radiographic survivorship was 84.6 %. Scapular notching was detected in 7/36 patients (17.5 %). There were five complications: one (stiffness) among patients with fracture sequelae and four among those with failed HH (instability, n = 2; humeral component disassembly, n = 1; pain, n = 1). The two groups did not exhibit significant differences in pain, clinical scores or ROM. RTSA with an all-polyethylene glenosphere may have the potential to reduce the risk of biological notching due to polyethylene osteolysis. Further long-term studies are required to assess its efficacy. The good clinical performance and reasonable rate of notching of the polyethylene glenosphere support its use in primary and revision shoulder arthroplasty. Level 4, retrospective therapeutic case series.

Correlations of magnetic resonance imaging findings with clinical symptom severity and prognosis of frozen shoulder.

PubMed

Yoon, Jong Pil; Chung, Seok Won; Lee, Byung Joo; Kim, Hyung Sup; Yi, Jae Hyuck; Lee, Hyun-Joo; Jeong, Won-Ju; Moon, Sung Gyu; Oh, Kyung-Soo; Yoon, Seok Tae

2017-10-01

To evaluate the correlation between indirect magnetic resonance (MR) arthrographic imaging findings and the clinical symptoms and prognosis of patients with frozen shoulder. Indirect MR arthrography was performed for 52 patients with primary frozen shoulder (mean age 55.1 ± 9.0 years) and 52 individuals without frozen shoulder (mean age 53.1 ± 10.7 years); capsular thickening and enhancement of the axillary recess as well as soft tissue thickening of the rotator interval were evaluated. Clinical symptom severity was assessed using the Visual Analogue Scale for Pain (VAS Pain), simple shoulder test (SST), Constant score, American Shoulder and Elbow Surgeons (ASES) score, and range of motion (ROM). At 6-month follow-up, we evaluated whether MR arthrography findings correlated with the clinical symptoms and prognosis. Capsular thickening and enhancement of the axillary recess as well as soft tissue thickening of the rotator interval were significantly greater in the patient group than in the controls (p < 0.001). Capsular thickening of the axillary recess did not correlate with clinical symptoms or ROM (n.s.); however, capsular enhancement correlated with clinical symptom severity according to VAS Pain (p = 0.005), SST (p = 0.046), and ASES scores (p = 0.009). Soft tissue thickening of the rotator interval did not correlate with clinical symptom severity, but was associated with external rotation limitation (p = 0.002). However, none of the parameters correlated with clinical symptoms at 6-month follow-up. Indirect MR arthrography provided ancillary findings, especially with capsular enhancement, for evaluating clinical symptom severity of frozen shoulder, but did not reflect the prognosis. MR findings in frozen shoulder should not replace clinical judgments regarding further prognosis and treatment decisions. IV.

Utility of polymer cerclage cables in revision shoulder arthroplasty.

PubMed

Edwards, T Bradley; Stuart, Kyle D; Trappey, George J; O'Connor, Daniel P; Sarin, Vineet K

2011-04-11

Revision shoulder arthroplasty often requires humeral osteotomy for stem extraction or is complicated by periprosthetic fracture. In these situations, various modes of fixation are used, including cerclage wires, cable plates, and allograft strut augmentation. The use of metal wires and cables, however, has been associated with soft tissue irritation, sharps injuries, and accelerated wear of joint arthroplasty bearing surfaces. As an alternative to traditional metal cables, the SuperCable (Kinamed Inc, Camarillo, California) contains braided ultra-high molecular-weight polyethylene fibers surrounding a nylon core. To date, no studies have examined the use of nonmetallic cerclage cables in shoulder arthroplasty.A retrospective review was performed of 11 patients who underwent shoulder arthroplasty for which nonmetallic cerclage cables were used. Clinical and radiographic data were examined regarding patient age, procedure performed, indication for cerclage cabling, time to healing of osteotomy or fracture, and any complications associated with the use of these cerclage cables. Minimum follow-up was 1 year. Ten patients underwent reverse total shoulder arthroplasty, and 1 patient underwent revision unconstrained total shoulder arthroplasty. Mean follow-up was 20.5 months. Ten patients required humeral osteotomy for stem or cement removal. Allograft augmentation was performed in 7 patients. Mean time to healing was 3.2 months. No patients experienced loosening or migration of hardware or allograft, and no complications directly related to the use of nonmetallic cerclage cables were identified. Copyright 2011, SLACK Incorporated.

Analysis of severely fractured glenoid components: clinical consequences of biomechanics, design, and materials selection on implant performance.

PubMed

Ansari, Farzana; Lee, Taylor; Malito, Louis; Martin, Audrey; Gunther, Stephen B; Harmsen, Samuel; Norris, Tom R; Ries, Mike; Van Citters, Douglas; Pruitt, Lisa

2016-07-01

The longevity of total shoulder replacement is primarily limited by the performance of the ultrahigh-molecular-weight polyethylene (UHMWPE) glenoid component in vivo. Variations in glenoid design (conformity, thickness), biomechanics (joint kinematics), and UHMWPE material selection (sterilization, cross-linking) distinguish total shoulder replacements from hip and knee arthroplasty devices. These variables can lead to severe mechanical failures, including gross fracture. Sixteen retrieved glenoids with severe fracture were analyzed. The explant cohort included 3 material groups (gamma-sterilized Hylamer; gamma-sterilized UHMWPE; and gas plasma-sterilized, remelted, highly cross-linked UHMWPE [HXL]) and a range of conformities (0- to 10-mm radial mismatch). Analysis included fractography (optical and scanning electron microscopy) and Fourier transform infrared spectroscopy for oxidative analysis. Fracture primarily occurred along the exterior rim for all 16 explants. Fourier transform infrared analysis and fractography revealed significant oxidative embrittlement for all gamma-sterilized glenoids. Fatigue striations and internal flaws were evident on the fracture surface of the HXL glenoid, with little oxidation detected. Fracture initiated at the external rim of all devices. Elevated oxidation levels and visible material distortion for representative gamma-sterilized conventional and Hylamer devices suggest oxidative embrittlement as a driving force for crack inception and subsequent fracture. Brittle fracture of theHXL glenoid resulted from a combination of elevated contact stress due to a nonconforming surface, an internal flaw, and reduced resistance to fatigue crack growth. This demonstrates that glenoid fracture associated with oxidation has not been eliminated with the advent of modern materials (HXL) in the shoulder domain. Basic Science Study; Implant Retrieval Study. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Revision of failed hemiarthroplasty for painful glenoid arthrosis to anatomic total shoulder arthroplasty.

PubMed

Sheth, Mihir M; Sholder, Daniel; Abboud, Joseph; Lazarus, Mark D; Ramsey, Matthew L; Williams, Gerald R; Namdari, Surena

2018-05-10

The impending burden of revision shoulder arthroplasty has increased interest in outcomes of revision procedures. Painful glenoid arthrosis following hemiarthroplasty is a common cause of reoperation, and conversion to anatomic total shoulder arthroplasty is one option. We identified patients who underwent revision of painful hemiarthroplasty to total shoulder arthroplasty over a 15-year period in a single tertiary-care health system. Presurgical and operative data were analyzed for 28 patients who met the inclusion and exclusion criteria. Patients were contacted at a minimum of 2 years' follow-up after revision surgery for functional outcome scores, reoperations, and implant survival. The 2- and 5-year implant survival rates were 93% and 86%, respectively. Functional outcomes were obtained from 21 patients with surviving implants. The mean American Shoulder and Elbow Surgeons score, visual analog scale score for pain, and Single Assessment Numerical Evaluation score were 78 ± 20, 2.3 ± 2.6, and 71 ± 24, respectively. The mean Short Form 12 mental and physical scores were 49 ± 10 and 43 ± 9, respectively. Of the patients, 17 (81%) were either satisfied or very satisfied with their outcome. Complications were seen in 10 patients (36%), and 6 patients (21%) required reoperation. Anatomic total shoulder arthroplasty following hemiarthroplasty can achieve successful outcomes and implant survival rates. Given our poor understanding of reverse shoulder arthroplasty longevity, this procedure should remain an option for patients with glenoid arthrosis and an intact rotator cuff. Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Glenoid labrum ossification and mechanical restriction of joint motion: extraosseous manifestations of melorheostosis.

PubMed

Subhas, N; Sundaram, M; Bauer, T W; Seitz, W H; Recht, M P

2008-02-01

We report a case of a 47-year-old man who presented with progressive loss of motion and pain in the right shoulder. Radiographs of the shoulder demonstrated dense ossification in the glenoid and humeral head with extension into the periarticular soft tissues. CT and MRI scans confirmed the radiographic findings and also revealed ossification of the glenoid labrum. A radiographic diagnosis of melorheostosis, an uncommon benign sclerosing bone dysplasia, was made. Because of the patient's severe symptomatology, he underwent total shoulder arthroplasty. Histological analysis of the resected masses was consistent with melorheostosis with a few areas covered by a cartilage cap. This case illustrates several uncommon but important features of melorheostosis, including mechanical obstruction of joint motion requiring joint replacement, ossification of the glenoid labrum, and cartilage-covering portions of the intra-articular masses, not to be confused with cartilage-producing tumors.

Emerging technology in surgical education: combining real-time augmented reality and wearable computing devices.

PubMed

Ponce, Brent A; Menendez, Mariano E; Oladeji, Lasun O; Fryberger, Charles T; Dantuluri, Phani K

2014-11-01

The authors describe the first surgical case adopting the combination of real-time augmented reality and wearable computing devices such as Google Glass (Google Inc, Mountain View, California). A 66-year-old man presented to their institution for a total shoulder replacement after 5 years of progressive right shoulder pain and decreased range of motion. Throughout the surgical procedure, Google Glass was integrated with the Virtual Interactive Presence and Augmented Reality system (University of Alabama at Birmingham, Birmingham, Alabama), enabling the local surgeon to interact with the remote surgeon within the local surgical field. Surgery was well tolerated by the patient and early surgical results were encouraging, with an improvement of shoulder pain and greater range of motion. The combination of real-time augmented reality and wearable computing devices such as Google Glass holds much promise in the field of surgery. Copyright 2014, SLACK Incorporated.

Inter and intra-system size variability of reverse shoulder arthroplasty polyethylene inserts

PubMed Central

Teeter, Matthew G.; Dawson, Matthew T.; Athwal, George S.

2016-01-01

Background: As the incidence of reverse shoulder arthroplasty (RSA) increases, so will the revision burden. At times, the revision surgeon may be faced with a well-fixed component on one side of the joint and revision implants from a different manufacturer. The ability to use glenoid and humeral implants from different manufacturers could simplify the revision procedure. This study hypothesized that across a range of RSA systems, some implants would demonstrate high size compatibility and others would demonstrate low compatibility. Materials and Methods: Six polyethylene inserts each from eight reverse total shoulder arthroplasty systems were examined (48 total inserts). All inserts were scanned using a laboratory micro-computed tomography scanner at 50 μm isotropic voxel spacing, and their surface geometries were reconstructed. The different implant geometries were co-registered, and the three-dimensional (3D) variability between the articular surfaces of the different implant systems was measured. Intrasystem manufacturing variability was also determined by measuring the 3D variability of inserts from the same system. Results: The intersystem polyethylene articular surface deviations between same-size systems were not significantly different (P = 0.61) and were a mean maximum of 60 ± 16 μm (range: 30-80 μm). Intrasystem manufacturing variability was equivalent between all but two models, averaging 49 ± 17 μm (range: 23-99 μm). Discussion: Differences in articular geometry between same-size inserts from different systems were on the same scale as intrasystem manufacturing variability, suggesting that different implant systems of the same nominal diameter could potentially be used interchangeably in revision or extenuating circumstances. Conclusion: The results of this study suggest that surgeons can theoretically interchange same-sized implant components from the different RSA systems tested when conducting revisions. PMID:26980984

Classification of instability after reverse shoulder arthroplasty guides surgical management and outcomes.

PubMed

Abdelfattah, Adham; Otto, Randall J; Simon, Peter; Christmas, Kaitlyn N; Tanner, Gregory; LaMartina, Joey; Levy, Jonathan C; Cuff, Derek J; Mighell, Mark A; Frankle, Mark A

2018-04-01

Revision of unstable reverse shoulder arthroplasty (RSA) remains a significant challenge. The purpose of this study was to determine the reliability of a new treatment-guiding classification for instability after RSA, to describe the clinical outcomes of patients stabilized operatively, and to identify those with higher risk of recurrence. All patients undergoing revision for instability after RSA were identified at our institution. Demographic, clinical, radiographic, and intraoperative data were collected. A classification was developed using all identified causes of instability after RSA and allocating them to 1 of 3 defined treatment-guiding categories. Eight surgeons reviewed all data and applied the classification scheme to each case. Interobserver and intraobserver reliability was used to evaluate the classification scheme. Preoperative clinical outcomes were compared with final follow-up in stabilized shoulders. Forty-three revision cases in 34 patients met the inclusion for study. Five patients remained unstable after revision. Persistent instability most commonly occurred in persistent deltoid dysfunction and postoperative acromial fractures but also in 1 case of soft tissue impingement. Twenty-one patients remained stable at minimum 2 years of follow-up and had significant improvement of clinical outcome scores and range of motion. Reliability of the classification scheme showed substantial and almost perfect interobserver and intraobserver agreement among all the participants (κ = 0.699 and κ = 0.851, respectively). Instability after RSA can be successfully treated with revision surgery using the reliable treatment-guiding classification scheme presented herein. However, more understanding is needed for patients with greater risk of recurrent instability after revision surgery. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Radiographic changes and clinical outcomes associated with an adjustable diaphyseal press-fit humeral stem in primary reverse shoulder arthroplasty.

PubMed

Harmsen, Samuel M; Norris, Tom R

2017-09-01

Press-fit humeral fixation in reverse shoulder arthroplasty (RSA) has become increasingly popular; however, radiographic analysis of these stems is limited. We aimed to evaluate the radiographic and clinical outcomes of an adjustable diaphyseal press-fit humeral stem in primary RSA. We conducted a retrospective review of 232 primary RSAs in 219 patients performed by a single surgeon using this system. Radiographic outcomes were evaluated in patients with at least 2 years of radiographic follow-up. Standardized postoperative digital radiographs were analyzed for loosening, osteolysis, and stress shielding. Clinical outcomes in patients who also had complete clinical data sets were evaluated at the most recent follow-up. Radiographic evidence of loosening was identified in 1 RSA (0.4%) associated with deep infection. Aseptic loosening was not observed. No stems were identified as being at high risk for loosening. Internal stress shielding was observed proximal to the coated diaphyseal component in 226 shoulders (97.4%). This finding was often visible at 3 months (92.7%) and predictably progressed on subsequent radiographs. Progression beyond the 2-year period was rarely seen (4.4%). No external stress shielding or osteolysis was observed. Thirty-six complications occurred in 33 patients (15.1%). At an average follow-up of 36.6 months, significant improvements were identified in all measured clinical outcomes (P < .001). Predictable fixation is achieved using an adjustable diaphyseal press-fit humeral system in primary RSA. Internal stress shielding is commonly observed but does not appear to compromise quality of fixation or clinical outcomes. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Glenosphere size in reverse shoulder arthroplasty: is larger better for external rotation and abduction strength?

PubMed

Müller, Andreas M; Born, Marian; Jung, Christian; Flury, Matthias; Kolling, Christoph; Schwyzer, Hans-Kaspar; Audigé, Laurent

2018-01-01

The role of glenosphere size in reverse shoulder arthroplasty (RSA) may be important in prosthetic stability, joint kinematics, rotator cuff tension and excursion, scapular impingement, humeral lateralization, deltoid wrap, and the occurrence of "notching." This study compared short- and midterm clinical and radiographic outcomes for 2 different glenosphere sizes of a single RSA type with respect to implant positioning, glenoid size, and morphology. This retrospective analysis included 68 RSA procedures that were prospectively documented in a local register during a 5-year postoperative period. Two glenosphere diameter sizes of 36 mm (n = 33) and 44 mm (n = 35) were used. Standard radiographs were made preoperatively (ie, baseline) and at 6, 12, 24, and 60 months after surgery. Range of motion, strength, the Constant-Murley score, and the Shoulder Pain and Disability Index were also assessed at all follow-up visits. The effect of glenosphere size on measured outcomes was adjusted for baseline values, patient gender, and humeral head diameter. No significant differences were found in the functional scores between treatment groups at all follow-up assessments. At the 12-month follow-up, patients with a 44-mm glenosphere had greater external rotation in adduction (mean difference, 12°; P = .001) and abduction strength (mean difference, 1.4 kg; P = .026) compared with those with the smaller implant. These differences remained at 60 months. Scapular notching was observed in 38% of all patients, without any relevant difference between the groups. An increase in glenosphere diameter leads to a clinically moderate but significant increase in external rotation in adduction and abduction strength at midterm follow-up. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Glenoid morphology and the safe zone for protecting the suprascapular nerve during baseplate fixation in reverse shoulder arthroplasty.

PubMed

Yang, Yuhui; Zuo, Jianlin; Liu, Tong; Shao, Pu; Wu, Haihe; Gao, Zhongli; Xiao, Jianlin

2018-03-01

The purpose of this study was to investigate glenoid morphology and define the safe zone for protecting the suprascapular nerve baseplate screw during baseplate fixation in reverse shoulder arthroplasty (RSA) in a Chinese population. Shoulder computed tomography (CT) scans from 56 subjects were retrospectively reviewed. Three-dimensional (3D) reconstruction was performed using Mimics software, and corresponding bony references were used to evaluate glenoid morphology. To standardize evaluation, the coronal scapular plane was defined. Safe fixation distances and screw placements were investigated by constructing a simulated cutting plane of the baseplate during RSA. Mean glenoid height was 35.83 ± 2.95 mm, and width was 27.32 ± 2.78 mm, with significant sexual dimorphism (p < 0.01). According to the cutting plane morphology, the average baseplate radius was 13.84 ± 1.34 mm. The distances from the suprascapular notch and from two bony reference points at the base of the scapular spine to the cutting plane were 30.27 ± 2.77 mm, 18.39 ± 1.67 mm and 16.52 ± 1.52 mm, respectively, with a gender-related difference. Based on the clock face indication system, the danger zone caused by the suprascapular nerve projection was oriented between the two o'clock and eight o'clock positions in reference to the right shoulder. Glenoid size and the safe zone for screw fixation during RSA were characterized in a Chinese population. Careful consideration of baseplate fixation and avoidance of suprascapular nerve injury are important for improved clinical outcome.

Comparing conventional and computer-assisted surgery baseplate and screw placement in reverse shoulder arthroplasty.

PubMed

Venne, Gabriel; Rasquinha, Brian J; Pichora, David; Ellis, Randy E; Bicknell, Ryan

2015-07-01

Preoperative planning and intraoperative navigation technologies have each been shown separately to be beneficial for optimizing screw and baseplate positioning in reverse shoulder arthroplasty (RSA) but to date have not been combined. This study describes development of a system for performing computer-assisted RSA glenoid baseplate and screw placement, including preoperative planning, intraoperative navigation, and postoperative evaluation, and compares this system with a conventional approach. We used a custom-designed system allowing computed tomography (CT)-based preoperative planning, intraoperative navigation, and postoperative evaluation. Five orthopedic surgeons defined common preoperative plans on 3-dimensional CT reconstructed cadaveric shoulders. Each surgeon performed 3 computer-assisted and 3 conventional simulated procedures. The 3-dimensional CT reconstructed postoperative units were digitally matched to the preoperative model for evaluation of entry points, end points, and angulations of screws and baseplate. Values were used to find accuracy and precision of the 2 groups with respect to the defined placement. Statistical analysis was performed by t tests (α = .05). Comparison of the groups revealed no difference in accuracy or precision of screws or baseplate entry points (P > .05). Accuracy and precision were improved with use of navigation for end points and angulations of 3 screws (P < .05). Accuracy of the inferior screw showed a trend of improvement with navigation (P > .05). Navigated baseplate end point precision was improved (P < .05), with a trend toward improved accuracy (P > .05). We conclude that CT-based preoperative planning and intraoperative navigation allow improved accuracy and precision for screw placement and precision for baseplate positioning with respect to a predefined placement compared with conventional techniques in RSA. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Can patients manage toileting after reverse total shoulder arthroplasty? A systematic review.

PubMed

Rojas, Jorge; Joseph, Jacob; Liu, Bingli; Srikumaran, Uma; McFarland, Edward G

2018-03-23

A major concern for patients undergoing reverse total shoulder arthroplasty (RTSA) is managing toileting after surgery. The goals of this systematic review of RTSA studies were to determine the following: (1) the percentage of patients who can manage toileting, (2) their degree of difficulty with toileting, and (3) the percentage of patients who can manage toileting after bilateral versus unilateral RTSA. Medline, EMBASE, Google Scholar, and the Cochrane Central Register of Controlled Trials were searched for studies reporting the ability to manage toileting after RTSA. Six studies with at least 12 months of follow-up were included, yielding 183 patients (105 unilateral RTSA, 78 bilateral RTSA). We pooled patient data and calculated the weighted mean proportion of patients able to manage toileting, those who reported difficulty, and those able to manage toileting after unilateral versus bilateral RTSA. Statistical significance was set at P < 0.05. Most patients (92%; 95% confidence interval, 87-95%) were able to manage toileting after RTSA. Some degree of difficulty with toileting was reported for 20% of all shoulders. Almost all patients with bilateral RTSA were able to manage toileting with at least one arm (weighted mean proportion 97%; 95% confidence interval, 88-99%). There was no significant difference in the proportion of patients able to manage toileting after unilateral versus bilateral RTSA (P = 0.08). Only 3% of all papers published on the clinical results of RTSA by June 2017 reported upon toileting after the procedure. With the available evidence, most patients were able to manage toileting after RTSA, although one-fifth reported some degree of difficulty. Ability to manage toileting was similar after unilateral versus bilateral RTSA. In the future, this variable should be a standard question after shoulder arthroplasty. IV.

Optimizing glenosphere position and fixation in reverse shoulder arthroplasty, Part One: The twelve-mm rule.

PubMed

Kelly, James D; Humphrey, C Scott; Norris, Tom R

2008-01-01

The Aequalis Reversed Shoulder Prosthesis (Tornier, Inc., Edina, MN) is a successful treatment option for older, low-demand patients with rotator cuff arthropathy. Scapular notching is the most common radiographic complication and is associated with poorer intermediate-term clinical outcomes. Aligning the lower border of the glenosphere baseplate with the inferior glenoid rim has been recommended to reduce this complication, but guidelines for achieving this positioning are currently lacking. The purpose of this study is to develop a rule of thumb that will facilitate proper glenosphere component positioning intraoperatively. Utilizing a computed tomography-templating protocol, we found that the ideal location of the drill hole for the baseplate post was 11.5 +/- 1.0 mm above the inferior glenoid rim. On the basis of measurements from 10 implanted cadaveric specimens, we concluded that drilling the baseplate posthole 12 mm above the inferior glenoid rim-the 12-mm rule-will result in excellent glenosphere position in most cases.

21 CFR 888.3660 - Shoulder joint metal/polymer semi-constrained cemented prosthesis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3660... device are: (1) FDA's: (i) “Use of International Standard ISO 10993 ‘Biological Evaluation of Medical... metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a...

21 CFR 888.3650 - Shoulder joint metal/polymer non-constrained cemented prosthesis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3650... are: (1) FDA's: (i) “Use of International Standard ISO 10993 ‘Biological Evaluation of Medical Devices... metal/polymer non-constrained cemented prosthesis is a device intended to be implanted to replace a...

Reverse shoulder arthroplasty combined with latissimus dorsi transfer using the bone-chip technique.

PubMed

Ortmaier, Reinhold; Resch, Herbert; Hitzl, Wolfgang; Mayer, Michael; Blocher, Martina; Vasvary, Imre; Mattiassich, Georg; Stundner, Ottokar; Tauber, Mark

2014-03-01

Reverse shoulder arthroplasty (RSA) can restore active elevation in rotator-cuff-deficient shoulders. However, RSA cannot restore active external rotation. The combination of latissimus dorsi transfer with RSA has been reported to restore both active elevation and external rotation. We hypothesised that in the combined procedure, harvesting the latissimus dorsi with a small piece of bone, leads to good tendon integrity, low rupture rates and good clinical outcome. Between 2004 and 2010, 13 patients (13 shoulders) were treated with RSA in combination with latissimus dorsi transfer in a modified manner. The mean follow-up was 65.4 months, and the mean age at index surgery was 71.1 years. All patients had external rotation lag sign and positive hornblower's sign, as well as radiological signs of cuff-tear arthropathy (Hamada 3, 4 or 5) and fatty infiltration grade 3 according to Goutallier et al. on magnetic resonance imaging (MRI). The outcome measures included the Constant Murley Score, University of California-Los Angeles (UCLA) shoulder score, Simple Shoulder Test (SST), visual analogue scale (VAS) and the Activities of Daily Living Requiring External Rotation (ADLER) score. Tendon integrity was evaluated with dynamic ultrasound. All patients were asked at final follow-up to rate their satisfaction as excellent, good, satisfied or dissatisfied. The overall mean Constant-Murley Shoulder Outcome Score (CMS) improved from 20.4 to 64.3 points (p < 0.001). Mean VAS pain score decreased from 6.8 to 1.1 (p < 0.001)., mean UCLA score improved from 7.9 to 26.4 (p < 0.001), mean SST score improved from 2.3 to 7.9 (p < 0.001) and mean postoperative ADLER score was 26 points. The average degree of abduction improved from 45° to 129° (p < 0.001), the average degree of anterior flexion improved from 55° to 138° (p < 0.001) and the average degree of external rotation improved from -16° to 21° (p < 0.001). Eight patients rated their results as very satisfied, three as satisfied and two as dissatisfied. This modified technique, which avoids cutting the pectoralis major tendon and involves harvesting the tendon together with a small piece of bone, leads to good or even better functional results compared with the results reported in the literature, and also has high patient satisfaction and low failure rates.

Uncemented glenoid component in total shoulder arthroplasty. Survivorship and outcomes.

PubMed

Martin, Scott David; Zurakowski, David; Thornhill, Thomas S

2005-06-01

Glenoid component loosening continues to be a major factor affecting the long-term survivorship of total shoulder replacements. Radiolucent lines, cement fracture, migration, and loosening requiring revision are common problems with cemented glenoid components. The purpose of this study was to evaluate the results of total shoulder arthroplasty with an uncemented glenoid component and to identify predictors of glenoid component failure. One hundred and forty-seven consecutive total shoulder arthroplasties were performed in 132 patients (mean age, 63.3 years) with use of an uncemented glenoid component fixed with screws between 1988 and 1996. One hundred and forty shoulders in 124 patients were available for follow-up at an average of 7.5 years. One shoulder in which the arthroplasty had failed at 2.4 years and for which the duration of follow-up was four years was also included for completeness. The preoperative diagnoses included osteoarthritis in seventy-two shoulders and rheumatoid arthritis in fifty-five. Radiolucency was noted around the glenoid component and/or screws in fifty-three of the 140 shoulders. The mean modified ASES (American Shoulder and Elbow Surgeons) score (and standard deviation) improved from 15.6 +/- 11.8 points preoperatively to 75.8 +/- 17.5 points at the time of follow-up. Eighty-five shoulders were not painful, forty-two were slightly or mildly painful, ten were moderately painful, and three were severely painful. Fifteen (11%) of the glenoid components failed clinically, and ten of them also had radiographic signs of failure. Eleven other shoulders had radiographic signs of failure but no symptoms at the time of writing. Three factors had a significant independent association with clinical failure: male gender (p = 0.02), pain (p < 0.01), and radiolucency adjacent to the flat tray (p < 0.001). In addition, the annual risk of implant revision was nearly seven times higher for patients with radiographic signs of failure. Clinical survivorship was 95% at five years and 85% at ten years. The failure rates of the total shoulder arthroplasties in this study were higher than those in previously reported studies of cemented polyethylene components with similar durations of follow-up. Screw breakage and excessive polyethylene wear were common problems that may lead to additional failures of these uncemented glenoid components in the future.

[Knee and shoulder arthroscopy. Positioning and thermal injuries].

PubMed

Meyer, S; Lobenhoffer, P

2008-11-01

Intraoperative positioning injuries during shoulder- and knee arthroscopy are rare complications and affect mainly nerves and soft tissue. Although the majority of these complications are reversible, in some cases serious negative consequences for the patient persist. This article describes the frequency of several positioning injuries including their prevention and the appropriate treatment. The legal responsibilities are illustrated as well as the importance of an intense preoperative investigation of preexisting diseases and possible risk factors. Furthermore, a review of possible thermal injuries of the patient during arthroscopy caused by e.g. electrosurgical instruments or the cold light source, is given as well as prevention strategies.

The cost effectiveness of vancomycin for preventing infections after shoulder arthroplasty: a break-even analysis.

PubMed

Hatch, M Daniel; Daniels, Stephen D; Glerum, Kimberly M; Higgins, Laurence D

2017-03-01

Increasing methicillin resistance and recognition of Propionibacterium acnes as a cause of infection in shoulder arthroplasty has led to the adoption of local vancomycin powder application as a more effective method to prevent expensive periprosthetic infections. However, no study has analyzed the cost effectiveness of vancomycin powder for preventing infection after shoulder replacement. Cost data for infection-related care of 16 patients treated for deep periprosthetic shoulder infection was collected from our institution for the break-even analysis. An equation was developed and applied to the data to determine how effective vancomycin powder would need to be at reducing a baseline infection rate to make prophylactic use cost effective. The efficacy of vancomycin (absolute risk reduction [ARR]) was evaluated at different unit costs, baseline infection rates, and average costs of treating infection. We determined vancomycin to be cost effective if the initial infection rate decreased by 0.04% (ARR). Using the current costs of vancomycin reported in the literature (range: $2.50/1000 mg to $44/1000 mg), we determined vancomycin to be cost effective with an ARR range of 0.01% at a cost of $2.50/1000 mg to 0.19% at $44/1000 mg. Baseline infection rate does not influence the ARR obtained at any specific cost of vancomycin or the cost of treating infection. We have derived and used a break-even equation to assess efficacy of prophylactic antibiotics during shoulder surgery. We further demonstrated the prophylactic administration of local vancomycin powder during shoulder arthroplasty to be a highly cost-effective practice. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Shoulder fusion after a self-inflicted gunshot wound: an injury pattern and treatment option.

PubMed

Zsoldos, C M; Basamania, C J; Bal, G K

2013-06-01

Gunshot injuries to the shoulder are rare and difficult to manage. We present a case series of seven patients who sustained a severe shoulder injury to the non-dominant side as a result of a self-inflicted gunshot wound. We describe the injury as 'suicide shoulder' caused by upward and outward movement of the gun barrel as the trigger is pulled. All patients were male, with a mean age of 32 years (21 to 48). All were treated at the time of injury with initial repeated debridement, and within four weeks either by hemiarthroplasty (four patients) or arthrodesis (three patients). The hemiarthroplasty failed in one patient after 20 years due to infection and an arthrodesis was attempted, which also failed due to infection. Overall follow-up was for a mean of 26 months (12 to 44). All four hemiarthroplasty implants were removed with no feasible reconstruction ultimately possible, resulting in a poor functional outcome and no return to work. In contrast, all three primary arthrodeses eventually united, with two patients requiring revision plating and grafting. These patients returned to work with a good functional outcome. We recommend arthrodesis rather than replacement as the treatment of choice for this challenging injury.

Serum C-reactive protein in patients undergoing elective shoulder arthroplasty. Prospective study.

PubMed

Torrens, Carlos; Santana, Fernando; Marí, Raquel; Puig, Lluis; Alier, Albert

2017-09-01

The objective of the study was to determine the normalization curve of the serum C-reactive protein (CRP) in elective shoulder arthroplasty. A prospective study including 58 consecutive patients who had undergone elective shoulder arthroplasty. Forty-one patients had received a Reverse Shoulder Arthroplasty, 13 a Total Shoulder Arthroplasty and 4 a Hemiarthroplasty. Based on a pilot study, blood samples to determine CRP values were obtained at baseline (1 h before surgery), on the 1st, 2nd, 6th, 8th and 14th postoperative days. All the patients included presented no postoperative complications during inpatient stay or any re-admission during the three months after surgery. Mean CRP values showed a rapid increase on the 1st postoperative day (7-fold higher than the baseline in cuff tear arthropathy, 11-fold higher in primary osteoarthritis, 1-fold higher in acute fracture) and reached a peak on the 2nd postoperative day (14-fold higher than the baseline in cuff tear arthropathy, 24-fold higher in primary osteoarthritis and 2-fold higher in acute fracture). After the 2nd postoperative day CRP values began to slowly decrease reaching the normal range in the 14th postoperative day. Serum CRP levels after elective shoulder arthroplasty rapidly increase to reach a maximum peak after the 2nd surgery day and then slowly decrease to return to normality on the 14th day. Knowing the normalization curve of CRP can be a helpful tool to help in the diagnosis of acute infections in elective shoulder arthroplasty. Copyright © 2017 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Variability of medial and posterior offset in patients with fourth-generation stemmed shoulder arthroplasty.

PubMed

Irlenbusch, Ulrich; Berth, Alexander; Blatter, Georges; Zenz, Peter

2012-03-01

Most anthropometric data on the proximal humerus has been obtained from deceased healthy individuals with no deformities. Endoprostheses are implanted for primary and secondary osteoarthritis, rheumatoid arthritis,humeral-head necrosis, fracture sequelae and other humeral-head deformities. This indicates that pathologicoanatomical variability may be greater than previously assumed. We therefore investigated a group of patients with typical shoulder replacement diagnoses, including posttraumatic and rheumatic deformities. One hundred and twenty-two patients with a double eccentrically adjustable shaft endoprosthesis served as a specific dimension gauge to determine in vivo the individual humeral-head rotation centres from the position of the adjustable prosthesis taper and the eccentric head. All prosthesis heads were positioned eccentrically.The entire adjustment range of the prosthesis of 12 mm medial/lateral and 6 mm dorsal/ventral was required. Mean values for effective offset were 5.84 mm mediolaterally[standard deviation (SD) 1.95, minimum +2, maximum +11]and 1.71 mm anteroposteriorly (SD 1.71, minimum −3,maximum 3 mm), averaging 5.16 mm (SD 1.76, minimum +2,maximum + 10). The posterior offset averaged 1.85 mm(SD 1.85, minimum −1, maximum + 6 mm). In summary, variability of the combined medial and dorsal offset of the humeral-head rotational centre determined in patients with typical underlying diagnoses in shoulder replacement was not greater than that recorded in the literature for healthy deceased patients.The range of deviation is substantial and shows the need for an adjustable prosthetic system.

The incidence and demographics of shoulder repair in Wisconsin, 2002-2010.

PubMed

Ablove, Robert H; Aul, Allison; Baer, Geoffrey

2014-12-01

Recent evidence has demonstrated a profound increase in the incidence of shoulder surgery. Superior labral anterior and posterior (SLAP) repair is a common procedure that has been noted in other studies to be increasing. The purpose of this study is to report the incidence and demographics of a single shoulder surgery code in the state of Wisconsin in order to evaluate whether it is being performed in increasing numbers relative to population. In a retrospective review of the Wisconsin Hospital Association statewide database for the years 2002-2010, we queried one ICD-9 procedure code: 81.83, other repair of shoulder (not replacement or repair of recurrent dislocation). This code was selected because it would include SLAP repair and exclude most other common shoulder surgeries. The data retrieved includes ICD-9 diagnosis codes, county of surgery, patient age, and gender. The number of surgeries performed in Wisconsin over the course of the study increased by 91.4% between 2002 and 2010, starting at 5649 in 2002 and rising to 10,812 by 2010. The incidence of surgeries increased 83.1% over this time period: from 103.8 per 100,000 in 2002 to 190.1 per 100,000 in 2010. The ratio of male to female surgeries remained nearly constant at 3:2 throughout the length of the study. The mean patient age at time of surgery increased 2.6 years, from 48.3 in 2002 to 50.9 in 2010. The increase in number of shoulder surgeries is well beyond expectations based on population growth. The relatively high percentage of females does not correspond with reported gender ratios in other studies of similar shoulder procedures. The high mean age of patients and the large number of surgeries in older patients also is concerning. More educational effort needs to be given regarding the diagnosis and treatment of common shoulder conditions.

Is reverse hybrid hip replacement the solution?

PubMed

Lindalen, Einar; Havelin, Leif I; Nordsletten, Lars; Dybvik, Eva; Fenstad, Anne M; Hallan, Geir; Furnes, Ove; Høvik, Oystein; Röhrl, Stephan M

2011-12-01

Reverse hybrid hip replacement uses a cemented all-polyethylene cup and an uncemented stem. Despite increasing use of this method in Scandinavia, there has been very little documentation of results. We have therefore analyzed the results from the Norwegian Arthroplasty Register (NAR), with up to 10 years of follow-up. The NAR has been collecting data on total hip replacement (THR) since 1987. Reverse hybrid hip replacements were used mainly from 2000. We extracted data on reverse hybrid THR from this year onward until December 31, 2009, and compared the results with those from cemented implants over the same period. Specific cup/stem combinations involving 100 cases or more were selected. In addition, only combinations that were taken into use in 2005 or earlier were included. 3,963 operations in 3,630 patients were included. We used the Kaplan-Meier method and Cox regression analysis for estimation of prosthesis survival and relative risk of revision. The main endpoint was revision for any cause, but we also performed specific analyses on different reasons for revision. We found equal survival to that from cemented THR at 5 years (cemented: 97.0% (95% CI: 96.8-97.2); reverse hybrid: 96.7% (96.0-97.4)) and at 7 years (cemented: 96.0% (95.7-96.2); reverse hybrid: 95.6% (94.4-96.7)). Adjusted relative risk of revision of the reverse hybrids was 1.1 (0.9-1.4). In patients under 60 years of age, we found similar survival of the 2 groups at 5 and 7 years, with an adjusted relative risk of revision of reverse hybrids of 0.9 (0.6-1.3) compared to cemented implants. With a follow-up of up to 10 years, reverse hybrid THRs performed well, and similarly to all-cemented THRs from the same time period. The reverse hybrid method might therefore be an alternative to all-cemented THR. Longer follow-up time is needed to evaluate whether reverse hybrid hip replacement has any advantages over all-cemented THR.

Glenoid deformity in the coronal plane correlates with humeral head changes in osteoarthritis: a radiographic analysis.

PubMed

Hawi, Nael; Magosch, Petra; Tauber, Mark; Lichtenberg, Sven; Martetschläger, Frank; Habermeyer, Peter

2017-02-01

A variety of measurements can be used to assess radiographic osteoarthritic changes of the shoulder. This study aimed to analyze the correlation between the radiographic humeral-sided Samilson and Prieto classification system and 3 different radiographic classifications describing the changes of the glenoid in the coronal plane. The study material included standardized radiographs of 50 patients with idiopathic osteoarthritis before anatomic shoulder replacement. On the basis of radiographic measurements, the cases were evaluated using the Samilson and Prieto grading system, angle β, inclination type, and critical shoulder angle by 2 independent observers. Classification measurements showed an excellent agreement between observers. Our results showed that the humeral-sided Samilson and Prieto grading system had a statistically significant good correlation with angle β (observer 1, r = 0.74; observer 2, r = 0.77; P < .05) and a statistically significant excellent correlation with the inclination type of the glenoid (observer 1, r  = 0.86; observer 2, r = 0.8; P < .05). A poor correlation to the critical shoulder angle was observed (r = -0.14, r = 0.03; P > .05). The grade of humeral-sided osteoarthritis according to Samilson and Prieto correlates with the glenoid-sided osteoarthritic changes of the glenoid in the coronal plane described by the angle β and by the inclination type of the glenoid. Higher glenoid-sided inclination is associated with higher grade of osteoarthritis in primary shoulder osteoarthritis. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The Family and Friends Plan: Grateful to Be Engaged, Parents, Grandparents, and Friends Happily Give

ERIC Educational Resources Information Center

Lum, Lydia

2011-01-01

Growing numbers of colleges and universities, as well as independent schools, are targeting parents, grandparents, and other nonalumni friends for gifts to meet institutional needs and, at many public institutions, replace appropriations lost to Draconian state cuts. Such efforts have taken root despite parents shouldering ever-climbing college…

Locomotion in simulated microgravity: gravity replacement loads

NASA Technical Reports Server (NTRS)

McCrory, Jean L.; Baron, Heidi A.; Balkin, Sandy; Cavanagh, Peter R.

2002-01-01

BACKGROUND: When an astronaut walks or runs on a treadmill in microgravity, a subject load device (SLD) is used to return him or her back to the treadmill belt. The gravity replacement load (GRL) in the SLD is transferred, via a harness, to the pelvis and/or the shoulders. This research compared comfort and ground reaction forces during treadmill running in a microgravity locomotion simulator at GRLs of 60%, 80%, and 100% of body weight (BW). Two harness designs (shoulder springs only (SSO) and waist and shoulder springs (WSS)) were used. HYPOTHESES: 1) The 100% BW gravity replacement load conditions would be comfortably tolerated and would result in larger ground reaction forces and loading rates than the lower load conditions, and 2) the WSS harness would be more comfortable than the SSO harness. METHODS: Using the Penn State Zero Gravity Locomotion Simulator (ZLS), 8 subjects ran at 2.0 m x s(-1) (4.5 mph) for 3 min at each GRL setting in each harness. Subjective ratings of harness comfort, ground reaction forces, and GRL data were collected during the final minute of exercise. RESULTS: The 100% BW loading conditions were comfortably tolerated (2.3 on a scale of 0-10), although discomfort increased as the GRL increased. There were no overall differences in perceived comfort between the two harnesses. The loading rates (27.1, 33.8, 39.1 BW x s(-1)) and the magnitudes of the first (1.0, 1.4, 1.6 BW) and second (1.3, 1.7, 1.9 BW) peaks of the ground reaction force increased with increasing levels (60, 80, 100% BW respectively) of GRL. CONCLUSIONS: Subjects were able to tolerate a GRL of 100% BW well. The magnitude of the ground reaction force peaks and the loading rate is directly related to the magnitude of the GRL.

Mechanisms of traumatic shoulder injury in elite rugby players.

PubMed

Crichton, James; Jones, Doug R; Funk, Lennard

2012-06-01

Shoulder injuries in rugby players are common, but the mechanisms of injury are less well understood. This study aims to elucidate common mechanisms of injury and identify the patterns of injury they produce. Twenty-four elite rugby players, referred to the senior author for diagnosis and management of shoulder injuries, were selected. Videos of the injuries were independently reviewed by rugby-medical experts to describe the mechanisms of injury. The mechanisms reported were collated and analysed to determine the level of agreement between reviewers and conclude an overall description of injury mechanisms. The authors identified three mechanisms of shoulder injury from the video analysis. These are the 'Try-Scorer', characterised by hyperflexion of the outstretched arm such as when scoring a try; the 'Tackler', extension of the abducted arm behind the player while tackling; and the 'Direct Impact', a direct blow to the arm or shoulder when held by the side in neutral or slight adduction. The Try Scorer and Tackler mechanisms both involve a levering force on the glenohumeral joint (GHJ). These mechanisms predominantly cause GHJ dislocation, with Bankart, reverse Bankart and superior labrum anterior-posterior tears. The Try-Scorer Mechanism also caused the majority (83%) of rotator cuff tears. The Direct Hit mechanism resulted in GHJ dislocation and labral injury in 37.5% of players and was most likely to cause acromioclavicular joint dislocation and scapula fractures, injuries that were not seen with the other mechanisms. Greater understanding of the mechanisms involved in rugby shoulder injury is useful in understanding the pathological injuries, guiding treatment and rehabilitation and aiding the development of injury-prevention methods.

The Shoulder Instability-Return to Sport after Injury (SIRSI): a valid and reproducible scale to quantify psychological readiness to return to sport after traumatic shoulder instability.

PubMed

Gerometta, Antoine; Klouche, Shahnaz; Herman, Serge; Lefevre, Nicolas; Bohu, Yoann

2018-01-01

The main goal of this study was to propose and validate a tool to quantify the psychological readiness of athletes to return to sport following traumatic shoulder instability and conservative or surgical management. «Knee» was replaced by the term «shoulder» in the Anterior Cruciate Ligament-Return to Sport after Injury scale. This pilot test of the Shoulder Instability-Return to Sport after Injury scale (SIRSI) was performed in a group of athletes who underwent surgery for post-traumatic chronic anterior shoulder instability. The final version was then validated according to the international COSMIN methodology. A retrospective study was performed including all rugby players who had reported an episode of instability between 2012 and 2013. The WOSI and the Walch-Duplay scales were used as reference questionnaires. Sixty-two patients were included, mean age 26 ± 5.2 years old, 5 women/57 men. Patients were professional or competitive athletes (70.9%) and followed-up for 4.6 ± 1.6 years after the first episode of shoulder instability. Shoulder surgery was performed in 30/62 (48.4%) patients, a mean 1.6 ± 1.2 years after the first episode of instability. The SIRSI was strongly correlated with the reference questionnaires (r = 0.80, p < 10 -5 ). The mean SIRSI score was significantly higher in patients who returned to play rugby (60.9 ± 26.6% vs 38.1 ± 25.6%, p = 0.001). The internal consistency of the scale was high (α = 0.96). Reproducibility of the test-retest was excellent (ρ = 0.93, 95% CI [0.89-0.96], p < 10 -5 ). No ceiling/floor effects were found. The SIRSI is a valid, reproducible scale that identifies patients who are ready to return to the same sport after an episode of shoulder instability, whether they undergo surgery or not. III.

Reverse total shoulder arthroplasty using helical blade to optimize glenoid fixation and bone preservation: preliminary results in thirty five patients with minimum two year follow-up.

PubMed

Zilber, Sebastien; Camana, Eleonora; Lapner, Peter; Haritinian, Emil; Nove Josserand, Laurent

2018-03-26

Glenoid loosening is a common cause of reverse total shoulder arthroplasty (RTSA) failure, and grafting of the glenoid is often required for revision due to bone loss due to the central peg in most glenoid baseplates. Helical blades have been used in the hip to optimize bone fixation in proximal femoral fracture. This study presents the initial results of specifically designed helical blade in the shoulder to optimize glenoid bone fixation and preservation as part of RTSA. Thirty-five patients underwent RTSA with glenoid helical blade fixation. An uncemented glenoid baseplate was used with a central helical blade partially coated with hydroxyapatite and two or three screws. Outcome analysis was performed pre-operatively and at two years. All patients were satisfied with the results and significant improvement was observed in functional outcome scores between baseline and final follow-up. There was a single intra-operative undisplaced glenoid fracture which did not compromise the baseplate fixation. There was no radiographic evidence of loosening or radiolucencies around the helical blade. The helical blade provides a satisfactory primary fixation. Because of its length (21 mm), care should be taken in cases of pre-existing bone loss or sclerotic bone to avoid glenoid fracture or anterior cortical perforation. Helical blade has the potential to facilitate glenoid implant revision by preserving the glenoid bone stock.

Do patients return to sports and work after total shoulder replacement surgery?

PubMed

Bülhoff, Matthias; Sattler, Peter; Bruckner, Thomas; Loew, Markus; Zeifang, Felix; Raiss, Patric

2015-02-01

Studies evaluating the return to sports and work after shoulder arthroplasty are rare, and there are no studies evaluating return to work after total shoulder arthroplasty (TSA). Patients undergoing TSA will be able to return to their preoperative sports levels and occupations. Case series; Level of evidence, 4. A total of 154 patients with 170 TSAs for primary glenohumeral arthritis were included. Two subgroups were formed: patients who had participated in sports during the 5 years before surgery (group 1; n = 105 [68%]) and patients who had never participated in sports (group 2; n = 49 [32%]). The return-to-work rate in patients who had not retired after surgery were also analyzed, as were responses to a survey. The mean age at the time of surgery was 71 years (range, 33-88 years) in group 1 and 76 years (range, 54-88 years) in group 2. Mean follow-up time was 6.2 years (range, 2.5-12.6 years). Fifty-seven patients (54%) in group 1 participated in sports right up to the time of surgery. All 57 (100%) returned to sports after surgery. A further 3 patients (3%) from group 1 resumed sporting activity after surgery; swimming was the most popular sport. No patient in group 2 started sports activity after shoulder replacement surgery. Many of the patients, 14% of the entire group, had retired by final follow-up because of TSA. Fourteen percent of patients in group 1 and group 2 were pursuing their work at the time of most recent follow-up. Thirty patients of the entire cohort (19.5%) had to change their occupations because of surgery. Patients who participated in sports before TSA were successfully able to return to sports activities after surgery. Patients who did not participate in sports just before surgery were unlikely to start sports after surgery. Fourteen percent of the entire cohort was able to return to work after surgery. © 2014 The Author(s).

Tubal ligation reversal

MedlinePlus

... the same day you have the procedure. Some women may need to stay in the hospital overnight. You will need a ride home. It may take a week or more to recover from this surgery. You will have some tenderness and pain. Your provider ... you can take. Many women will have shoulder pain for a few days. ...

Legal and psychological considerations for obtaining informed consent for reverse total shoulder arthroplasty.

PubMed

Blackwood, Craig; Dixon, Jen; Reilly, Peter; Emery, Roger J

2017-01-01

This paper seeks to outline recent legal developments and requirements pertinent to obtaining informed consent. We argue that this is of particular relevance to patients considering a reverse total shoulder arthroplasty, due to the high complication rate associated with this procedure. By examining the cognitive processes involved in decision-making, and other clinician-related factors such as delivery of information, gender bias and conflict of interest, we explore some of the barriers that can undermine the processes of shared decision-making and obtaining genuine informed consent. We argue that these issues highlight the importance for surgeons in understanding the cognitive processes and other influential factors involved in patients' comprehension and decision-making. We recommend, based on strong evidence, that decision aids could prove useful in overcoming such challenges and could provide one way of mitigating the ethical, professional and legal consequences of failing to obtain proper informed consent. They are not widely used in orthopaedics at present, although it would be in the interests of both the surgeon and patient for such measures to be explored.

Legal and psychological considerations for obtaining informed consent for reverse total shoulder arthroplasty

PubMed Central

Blackwood, Craig; Reilly, Peter; Emery, Roger J

2016-01-01

This paper seeks to outline recent legal developments and requirements pertinent to obtaining informed consent. We argue that this is of particular relevance to patients considering a reverse total shoulder arthroplasty, due to the high complication rate associated with this procedure. By examining the cognitive processes involved in decision-making, and other clinician-related factors such as delivery of information, gender bias and conflict of interest, we explore some of the barriers that can undermine the processes of shared decision-making and obtaining genuine informed consent. We argue that these issues highlight the importance for surgeons in understanding the cognitive processes and other influential factors involved in patients’ comprehension and decision-making. We recommend, based on strong evidence, that decision aids could prove useful in overcoming such challenges and could provide one way of mitigating the ethical, professional and legal consequences of failing to obtain proper informed consent. They are not widely used in orthopaedics at present, although it would be in the interests of both the surgeon and patient for such measures to be explored. PMID:28572846

Influence of different peg length in glenoid bone loss: A biomechanical analysis regarding primary stability of the glenoid baseplate in reverse shoulder arthroplasty.

PubMed

Königshausen, M; Jettkant, B; Sverdlova, N; Ehlert, C; Gessmann, J; Schildhauer, T A; Seybold, D

2015-01-01

There is no biomechanical basis to determine the influence of different length of the central peg of the baseplate anchored within the native scapula in glenoid defect reconstruction in cases of degenerative or posttraumatic glenoid bone loss in reversed shoulder arthroplasty. The purpose of this study was to analyse the stability of different peg lengths used in glenoid bone loss in reversed shoulder arthroplasty. Different lengths of metaglene pegs with different depths of peg anchorage performed with or without metaglene screws in sawbone foam blocks were loaded in vertical and horizontal directions for differentiating load capacities. Simulated physiological loadings were then applied to the peg implants to determine the limits of loading in each depth of anchorage. The loading capacity of the implant was reduced as less of the peg was anchored. The vertically loaded implants showed a significantly higher stability, in contrast to those loaded horizontally at a corresponding peg length and depth of anchorage (p < 0.05). The tests revealed that the metaglene screws are more essential for primary stability than is the peg particularly in the vertically directed loadings (2/3 anchored: peg contributed to 28% of the stability, 1/3 anchorage: peg contributed to 12%). Under the second test conditions, the lowest depth of peg anchorage (1/3) resulted in 322 Newtons [N] in the long peg with a vertical loading direction, and in 130 N in the long peg with a horizontal loading direction (p < 0.05). The pegs should be anchored as deeply as possible into the native scapula bone stock. The metaglene screws play a major role in the initial stability, in contrast to the peg, and they become more important when the depth of the peg anchorage is reduced. If possible, four metaglene screws should be used in cases of uncontained bone loss to guarantee the highest stability.

Handheld magnetic sensor for measurement of tension

NASA Astrophysics Data System (ADS)

Singal, K.; Rajamani, R.

2012-04-01

This letter develops an analytical formulation for measurement of tension in a string using a handheld sensor. By gently pushing the sensor against the string, the tension in the string can be obtained. An experimental sensor prototype is constructed to verify the analytical formulation. The centimeter-sized prototype utilizes three moving pistons and magnetic field based measurements of their positions. Experimental data show that the sensor can accurately measure tension on a bench top rig. The developed sensor could be useful in a variety of orthopedic surgical procedures, including knee replacement, hip replacement, ligament repair, shoulder stabilization, and tendon repair.

Mechanical load on the low back and shoulders during pushing and pulling of two-wheeled waste containers compared with lifting and carrying of bags and bins.

PubMed

Schibye, B; Søgaard, K; Martinsen, D; Klausen, K

2001-08-01

Compare the mechanical load on the low back and shoulders during pushing and pulling a two-wheeled container with the load during lifting and carrying the same amount of waste. Only little is known about risk factors and mechanical loads during push/pull operations. A complete 2(3) factor push/pull experiment. A two-wheeled container with 25 or 50 kg was pushed in front of and pulled behind the body by seven waste collectors. Further, the same subjects lifted and carried a paper bag and a dustbin both loaded with 7 and 25 kg. All operations were video recorded and the push/pull force was measured by means of a three-dimensional force transducer. Peak Motus and Watbak software were used for digitising and calculation of torque at L4/L5 and the shoulder joints and compression and shear forces at L4/L5. During pushing and pulling the compression at L4/L5 is from 605 to 1445 N. The extension torque at L4/L5 produced by the push/pull force is counteracted by the forward leaning of the upper body. The shear force is below 202 N in all situations. The torque at the shoulders is between 1 and 38 Nm. In the present experiments the torques at the low back and the shoulders are low during pushing and pulling. No relation exists between the size of the external force and the torque at the low back and the shoulder. Pushing and pulling are common in many workplaces and have often replaced lifting and carrying situations. This has emphasised the need for more knowledge of the internal mechanical load on the body during these activities.

Long-term follow-up after latissimus dorsi transfer for irreparable posterosuperior rotator cuff tears.

PubMed

El-Azab, Hossam Mahmoud; Rott, Olaf; Irlenbusch, Ulrich

2015-03-18

Irreparable posterosuperior rotator cuff tears are treated in several ways. Transfer of the latissimus dorsi is an alternative with acceptable mid-term results, but long-term results have rarely been published. The cases of 108 consecutive patients with 115 shoulders treated with latissimus dorsi transfer between 2000 and 2005 were reviewed clinically and radiographically. Ninety-three shoulders in eighty-six patients were included in the follow-up analysis. The mean duration of follow-up was 9.3 years (range, 6.6 to 11.7 years), and the mean age at the operation was fifty-six years (range, forty to seventy-two years). Outcome measures included the Constant-Murley score (Constant score), American Shoulder and Elbow Surgeons (ASES) index, and visual analog scale (VAS) for pain. The progress of cuff tear arthropathy was determined with radiographic evaluation according to the system described by Hamada et al. The mean relative Constant score improved from 44% preoperatively to 71% at the time of follow-up (p < 0.0001, effect size = 0.6), excluding the clinical failures. Similarly, the mean ASES index improved from 30 to 70 (p < 0.0001, effect size = 0.7), and the mean VAS score decreased from 7.8 to 2.4 (p < 0.0001, effect size = 0.8). A pain-free outcome was reported in only eighteen shoulders (19%). Active shoulder movement improved significantly (p < 0.05). The mean Hamada radiographic grade of cuff tear arthropathy increased from 1.7 (range, 0 to 2) preoperatively to 2.2 (range, 1 to 5) (p < 0.0001, effect size = 0.2). The rate of clinical failure of latissimus dorsi transfer was 10%, and the rate of shoulder prosthetic replacement after latissimus dorsi transfer was 4%. Pain relief and improvement of shoulder function were maintained a mean of 9.3 years after latissimus dorsi transfer for irreparable posterosuperior cuff defects. The younger the patient, the better the outcome. Copyright © 2015 by The Journal of Bone and Joint Surgery, Incorporated.

Mechanisms of traumatic shoulder injury in elite rugby players

PubMed Central

Crichton, James; Jones, Doug R; Funk, Lennard

2012-01-01

Background Shoulder injuries in rugby players are common, but the mechanisms of injury are less well understood. This study aims to elucidate common mechanisms of injury and identify the patterns of injury they produce. Materials and methods Twenty-four elite rugby players, referred to the senior author for diagnosis and management of shoulder injuries, were selected. Videos of the injuries were independently reviewed by rugby-medical experts to describe the mechanisms of injury. The mechanisms reported were collated and analysed to determine the level of agreement between reviewers and conclude an overall description of injury mechanisms. Results The authors identified three mechanisms of shoulder injury from the video analysis. These are the ‘Try-Scorer’, characterised by hyperflexion of the outstretched arm such as when scoring a try; the ‘Tackler’, extension of the abducted arm behind the player while tackling; and the ‘Direct Impact’, a direct blow to the arm or shoulder when held by the side in neutral or slight adduction. The Try Scorer and Tackler mechanisms both involve a levering force on the glenohumeral joint (GHJ). These mechanisms predominantly cause GHJ dislocation, with Bankart, reverse Bankart and superior labrum anterior–posterior tears. The Try-Scorer Mechanism also caused the majority (83%) of rotator cuff tears. The Direct Hit mechanism resulted in GHJ dislocation and labral injury in 37.5% of players and was most likely to cause acromioclavicular joint dislocation and scapula fractures, injuries that were not seen with the other mechanisms. Conclusion Greater understanding of the mechanisms involved in rugby shoulder injury is useful in understanding the pathological injuries, guiding treatment and rehabilitation and aiding the development of injury-prevention methods. PMID:22510645

In vitro biomechanical comparison of three different types of single- and double-row arthroscopic rotator cuff repairs: analysis of continuous bone-tendon contact pressure and surface during different simulated joint positions.

PubMed

Grimberg, Jean; Diop, Amadou; Kalra, Kunal; Charousset, Christophe; Duranthon, Louis-Denis; Maurel, Nathalie

2010-03-01

We assessed bone-tendon contact surface and pressure with a continuous and reversible measurement system comparing 3 different double- and single-row techniques of cuff repair with simulation of different joint positions. We reproduced a medium supraspinatus tear in 24 human cadaveric shoulders. For the 12 right shoulders, single-row suture (SRS) and then double-row bridge suture (DRBS) were used. For the 12 left shoulders, DRBS and then double-row cross suture (DRCS) were used. Measurements were performed before, during, and after knot tying and then with different joint positions. There was a significant increase in contact surface with the DRBS technique compared with the SRS technique and with the DRCS technique compared with the SRS or DRBS technique. There was a significant increase in contact pressure with the DRBS technique and DRCS technique compared with the SRS technique but no difference between the DRBS technique and DRCS technique. The DRCS technique seems to be superior to the DRBS and SRS techniques in terms of bone-tendon contact surface and pressure. Copyright 2010 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Survey study suggests that reverse total shoulder arthroplasty is becoming the treatment of choice for four-part fractures of the humeral head in the elderly.

PubMed

Savin, David D; Zamfirova, Ina; Iannotti, Joseph; Goldberg, Benjamin A; Youderian, Ari R

2016-09-01

The role of reverse total shoulder arthroplasty (RTSA) for three and four-part proximal humerus fractures is evolving. However, there does not appear to be a clear consensus amongst surgeons. The purpose of this study is to further define the standard of care, assessing surgeon preference and treatment considerations for management of such fractures. Orthopaedic surgeons were surveyed on their training, practice setting, and experience regarding management of four-part proximal humerus fractures. The survey also presented five representative cases to assess treatment preferences. Two hundred five surgeons responded to the survey with fellowship training in shoulder and elbow surgery (114), orthopaedic trauma (35) or sports medicine/other training (56). There was no difference between respondents with years in practice and confidence with performing RTSA, however, surgeons in the academic setting were more confident in performing the surgery. Surgeons preferred RTSA for management of four-part fractures in patients over age 65. However, they also trended to favour hemiarthroplasty with higher co-morbidities. Physicians with more than 11 years of experience were more likely to choose hemiarthroplasty for older and high comorbidity patients. RTSA was not the preferred treatment method for younger, active patients. Patient age and fracture pattern had a greater influence on the surgeon's decision. There is a consensus in our study population that RTSA is the preferred treatment for four-part proximal humerus fractures for elderly patients with patient age and fracture pattern being the most important factors in making management decisions. Level III - Case controlled study.

Tool for Two Types of Friction Stir Welding

NASA Technical Reports Server (NTRS)

Carter, Robert

2006-01-01

A tool that would be useable in both conventional and self-reacting friction stir welding (FSW) has been proposed. The tool would embody both a prior tooling concept for self-reacting FSW and an auto-adjustable pin-tool (APT) capability developed previously as an augmentation for conventional FSW. Some definitions of terms are prerequisite to a meaningful description of the proposed tool. In conventional FSW, depicted in Figure 1, one uses a tool that includes (1) a rotating shoulder on top (or front) of the workpiece and (2) a rotating pin that protrudes from the shoulder into the depth of the workpiece. The main axial force exerted by the tool on the workpiece is reacted through a ridged backing anvil under (behind) the workpiece. When conventional FSW is augmented with an APT capability, the depth of penetration of the pin into the workpiece is varied in real time by a position- or force-control system that extends or retracts the pin as needed to obtain the desired effect. In self-reacting (also known as self-reacted) friction stir welding (SR-FSW), there are two rotating shoulders: one on top (or front) and one on the bottom (or back) of the workpiece. In this case, a threaded shaft protrudes from the tip of the pin to beyond the back surface of the workpiece. The back shoulder is held axially in place against tension by a nut on the threaded shaft. The main axial force exerted on the workpiece by the tool and front shoulder is reacted through the back shoulder and the threaded shaft, back into the FSW machine head, so that a backing anvil is no longer needed. A key transmits torque between the bottom shoulder and the threaded shaft, so that the bottom shoulder rotates with the shaft. A tool for SRFSW embodying this concept was reported in "Mechanism for Self-Reacted Friction Stir Welding" (MFS-31914), NASA Tech Briefs, Vol. 28, No. 10 (October 2004), page 53. In its outward appearance, the proposed tool (see Figure 2) would fit the above description of an SR-FSW tool. In this case, the FSW machine would have an APT capability and the pin would be modified to accept a bottom shoulder. The APT capability could be used to vary the distance between the front and back shoulders in real time to accommodate process and workpiece-thickness variations. The tool could readily be converted to a conventional FSW tool, with or without APT capability, by simply replacing the modified pin with a conventional FSW pin.

Rotator Cuff Deficient Arthritis of the Glenohumeral Joint

PubMed Central

Macaulay, Alec A.; Greiwe, R. Michael

2010-01-01

Rotator cuff deficient arthritis of the glenohumeral joint, especially cuff tear arthropathy, has proved a challenging clinical entity for orthopaedic surgeons ever since Charles Neer originally detailed the problem in 1983. Understanding has improved regarding the pathophysiology and pathomechanics underlying cuff tear arthropathy. Surgical reconstruction options can lead to excellent outcomes for patients afflicted with these painful and functionally limited shoulders. Humeral hemiarthroplasty and reverse total shoulder arthroplasty have jumped to the forefront in the treatment of cuff tear arthropathy. As studies continue to look at the results of these procedures in cuff tear arthropathy, existing indications and treatment algorithms will be further refined. In this article the history and pathophysiology of cuff tear arthropathy are reviewed. Additionally, the clinical findings and results of surgical reconstruction are discussed. PMID:21119934

Reverse shoulder arthroplasty for the treatment of acute complex proximal humeral fractures: Influence of greater tuberosity healing on the functional outcomes.

PubMed

Torrens, Carlos; Alentorn-Geli, Eduard; Mingo, Felipe; Gamba, Carlo; Santana, Fernando

2018-01-01

To investigate the influence of greater tuberosity healing on the functional outcomes of reverse shoulder arthroplasty (RSA) for the treatment of acute complex proximal humeral fractures (PHFs), and to investigate the influence of patient- and surgery-related factors in the healing of the greater tuberosity. Retrospective study including 41 consecutive PHFs treated using RSA with minimum 2-year follow-up. In all the cases, tuberosities were reattached with a standardized technique. All the patients were assessed at the last follow-up with constant score. Body mass index, surgery delay, comorbidities, polyethylene size, glenosphere size, overhanging of glenosphere, and scapular notch were recorded, and their influence in final constant score and in greater tuberosity healing was analyzed. Mean final constant score was of 60.7 points (standard deviation (SD) = 9.9). Greater tuberosity healed in proper position in 68% of the cases. There were no significant differences in constant score between patients with (mean = 61; SD = 9.5) and without (mean = 61; SD = 11.3) the healing of greater tuberosity. All patients scored above 90° in forward elevation. Scapular notch was reported in 14.6% of the cases. Age significantly affected the constant score ( p = 0.008). Comorbidities significantly interfered with greater tuberosity healing ( p = 0.03). There was one reoperation after dislocation. In spite of expecting good functional outcome with low complication rate after RSA for acute PHFs, the influence of greater tuberosity healing on shoulder function could not be demonstrated. The presence of comorbidities, but not age or gender, negatively influenced the healing of the greater tuberosity.

Optimal screw placement for base plate fixation in reverse total shoulder arthroplasty.

PubMed

DiStefano, James Guido; Park, Andrew Y; Nguyen, Thuc-Quyen D; Diederichs, Gerd; Buckley, Jenni M; Montgomery, William H

2011-04-01

Scapular cortical thickness has not been fully characterized from the perspective of determining optimal screw placement for securing the glenoid base plate in reverse shoulder arthroplasty. Twelve fresh frozen cadaveric scapulae underwent high resolution CT scans with 3-dimensional reconstructions and wall thickness analysis. Digital base plates were positioned and virtual screws were placed according to 2 scenarios: A - intraosseous through the entire course and exits a "safe region" with no known neurovascular structures; B - may leave and re-enter the bone and penetrates the thickest cortical region accessible regardless of adjacent structures. For scenario A, the optimal screw configurations were: (superior screw) length = 35 mm, 9° superior, 2° posterior; (inferior screw-A) length = 34 mm, 16° inferior, 5° anterior; (inferior screw-B) length = 31 mm, 31 inferior, 4 posterior; (posterior screw) length 19 mm, 29° inferior, 3° anterior. For scenario B: (superior screw) length = 36 mm, 28° superior, 10° anterior; (inferior screw) length = 35 mm, 19° inferior, 4° anterior; (posterior screw) length 37 mm, 23° superior, 3° anterior. The anterior screw was consistent between scenarios A and B, averaged 29 mm in length and was directed 16° inferior and 14° posterior. Thicker cortical regions were present in the lateral aspect of the suprascapular notch, scapular spine base, anterior/superior aspect of inferior pillar and junction of glenoid neck and scapular spine. Regions with high cortical thickness were accessible for both scenarios except for the posterior screw in scenario A. Copyright © 2011 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Optimal baseplate rotational alignment for locking-screw fixation in reverse total shoulder arthroplasty: a three-dimensional computer-aided design study.

PubMed

Stephens, Byron F; Hebert, Casey T; Azar, Frederick M; Mihalko, William M; Throckmorton, Thomas W

2015-09-01

Baseplate loosening in reverse total shoulder arthroplasty (RTSA) remains a concern. Placing peripheral screws into the 3 pillars of the densest scapular bone is believed to optimize baseplate fixation. Using a 3-dimensional computer-aided design (3D CAD) program, we investigated the optimal rotational baseplate alignment to maximize peripheral locking-screw purchase. Seventy-three arthritic scapulae were reconstructed from computed tomography images and imported into a 3D CAD software program along with representations of an RTSA baseplate that uses 4 fixed-angle peripheral locking screws. The baseplate position was standardized, and the baseplate was rotated to maximize individual and combined peripheral locking-screw purchase in each of the 3 scapular pillars. The mean ± standard error of the mean positions for optimal individual peripheral locking-screw placement (referenced in internal rotation) were 6° ± 2° for the coracoid pillar, 198° ± 2° for the inferior pillar, and 295° ± 3° for the scapular spine pillar. Of note, 78% (57 of 73) of the screws attempting to obtain purchase in the scapular spine pillar could not be placed without an in-out-in configuration. In contrast, 100% of coracoid and 99% of inferior pillar screws achieved full purchase. The position of combined maximal fixation was 11° ± 1°. These results suggest that approximately 11° of internal rotation is the ideal baseplate position for maximal peripheral locking-screw fixation in RTSA. In addition, these results highlight the difficulty in obtaining optimal purchase in the scapular spine. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Regional analgesia for improvement of long-term functional outcome after elective large joint replacement.

PubMed

Atchabahian, Arthur; Schwartz, Gary; Hall, Charles B; Lajam, Claudette M; Andreae, Michael H

2015-08-13

Regional analgesia is more effective than conventional analgesia for controlling pain and may facilitate rehabilitation after large joint replacement in the short term. It remains unclear if regional anaesthesia improves functional outcomes after joint replacement beyond three months after surgery. To assess the effects of regional anaesthesia and analgesia on long-term functional outcomes 3, 6 and 12 months after elective major joint (knee, shoulder and hip) replacement surgery. We performed an electronic search of several databases (CENTRAL, MEDLINE, EMBASE, CINAHL), and handsearched reference lists and conference abstracts. We updated our search in June 2015. We included randomized controlled trials (RCTs) comparing regional analgesia versus conventional analgesia in patients undergoing total shoulder, hip or knee replacement. We included studies that reported a functional outcome with a follow-up of at least three months after surgery. We used standard methodological procedures expected by Cochrane. We contacted study authors for additional information. We included six studies with 350 participants followed for at least three months. All of these studies enrolled participants undergoing total knee replacement. Studies were at least partially blinded. Three studies had a high risk of performance bias and one a high risk of attrition bias, but the risk of bias was otherwise unclear or low.Only one study assessed joint function using a global score. Due to heterogeneity in outcome and reporting, we could only pool three out of six RCTs, with range of motion assessed at three months after surgery used as a surrogate for joint function. All studies had a high risk of detection bias. Using the random-effects model, there was no statistically significant difference between the experimental and control groups (mean difference 3.99 degrees, 95% confidence interval (CI) - 2.23 to 10.21; P value = 0.21, 3 studies, 140 participants, very low quality evidence).We did not perform further analyses because immediate adverse effects were not part of the explicit outcomes of any of these typically small studies, and long-term adverse events after regional anaesthesia are rare.None of the included studies elicited or reported long-term adverse effects like persistent nerve damage. More high-quality studies are needed to establish the effects of regional analgesia on function after major joint replacement, as well as on the risk of adverse events (falls).

Scapular allograft reconstruction after total scapulectomy: surgical technique and functional results.

PubMed

Capanna, Rodolfo; Totti, Francesca; Van der Geest, Ingrid C M; Müller, Daniel A

2015-08-01

Scapular allograft reconstruction after total scapulectomy preserving the rotator cuff muscles is an oncologically safe procedure and results in good functional outcome with a low complication rate. The data of 6 patients who underwent scapular allograft reconstruction after a total scapulectomy for tumor resection were retrospectively reviewed. At least 1 of the rotator cuff muscles was preserved and the size-matched scapular allograft fixed to the residual host acromion with a plate and screws. The periscapular muscles and the residual joint capsule were sutured to the corresponding insertions of the allograft. The mean follow-up was 5.5 years (range, 24-175 months). In all patients, a wide surgical margin was achieved. The average functional scores were 20 points for the International Society of Limb Salvage score and 60 points for the American Shoulder and Elbow Surgeons score. Mean active shoulder flexion of 60° (range, 30°-90°) and mean active abduction of 62° (range, 30°-90°) were achieved. During the follow-up, 1 patient (16.6%) had a local recurrence and lung metastasis, whereas the remaining 5 patients (83.3%) were disease free. Two breakages of the osteosynthesis and 2 allograft fractures were observed, necessitating a revision surgery in 2 cases (33.3%). In this series, no infection, allograft resorption, or shoulder instability occurred. Allograft substitution of a completely removed scapula is an oncologically safe procedure, with good functional results, avoiding common complications in prosthetic replacements such as infection and dislocation of the shoulder joint. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Isolated Subscapularis Repair in Irreparable Posterosuperior Massive Rotator Cuff Tears Involving the Subscapularis Tendon.

PubMed

Kim, Sung-Jae; Choi, Yun-Rak; Jung, Min; Lee, Won-Yong; Chun, Yong-Min

2017-05-01

No previous study has examined whether isolated subscapularis tendon repair in irreparable posterosuperior massive rotator tears involving the subscapularis tendon in relatively young patients without arthritis can yield satisfactory outcomes. We hypothesized that this procedure would produce favorable outcomes in patients who might otherwise be candidates for reverse arthroplasty. Case series; Level of evidence, 4. This retrospective study included 24 patients in their 50s and 60s, without shoulder arthritis, who underwent arthroscopic isolated subscapularis repair for an irreparable massive rotator cuff tear involving the subscapularis tendon. Preoperative and postoperative visual analog scale (VAS) pain scores, subjective shoulder values (SSVs), University of California at Los Angeles (UCLA) shoulder scores, American Shoulder and Elbow Surgeons (ASES) scores, subscapularis strength (modified bell-press test; maximum of 5), and shoulder active range of motion (ROM) were assessed. Postoperative magnetic resonance arthrography (MRA) was performed 6 months postoperatively to assess structural integrity of the repaired subscapularis. At a mean 34.8 months (range, 24-49 months) of follow-up, VAS pain scores (improved from 7.1 to 2.5), SSVs (33.3 to 75.2), ASES scores (35.9 to 76.0), UCLA shoulder scores (11.6 to 24.8), subscapularis strength, and ROM were significantly improved compared with preoperative measurements ( P < .001). Subscapularis muscle strength improved from 3.7 to 4.2 ( P < .001). For active ROM, forward flexion and internal rotation improved significantly ( P < .001); however, external rotation exhibited no significant improvement. Follow-up MRA was performed in 22 patients (92%) and showed retear of the repaired subscapularis in 6 (27% of the 22). Isolated repair of the subscapularis tendon in irreparable massive rotator cuff tears involving the subscapularis tendon yielded satisfactory short-term outcomes and structural integrity in patients in their 50s and 60s without arthritis. If patients with irreparable massive rotator cuff tears involving the subscapularis tendon are relatively young or have minimal concomitant arthritis, this repair can be worthwhile.

Usefulness of intra-articular botulinum toxin injections. A systematic review.

PubMed

Khenioui, Hichem; Houvenagel, Eric; Catanzariti, Jean François; Guyot, Marc Alexandre; Agnani, Olivier; Donze, Cécile

2016-03-01

Botulinum toxin is a proven and widely used treatment for numerous conditions characterized by excessive muscular contractions. Recent studies have assessed the analgesic effect of botulinum toxin in joint pain and started to unravel its mechanisms. We searched the international literature via the Medline database using the term "intraarticular botulinum toxin injection" combined with any of the following terms: "knee", "ankle", "shoulder", "osteoarthritis", "adhesive capsulitis of the shoulder". Of 16 selected articles about intraarticular botulinum toxin injections, 7 were randomized controlled trials done in patients with osteoarthritis, adhesive capsulitis of the shoulder, or chronic pain after joint replacement surgery. Proof of anti-nociceptive effects was obtained in some of these indications and the safety and tolerance profile was satisfactory. The studies are heterogeneous. The comparator was usually a glucocorticoid or a placebo; a single study used hyaluronic acid. Pain intensity was the primary outcome measure. The number of randomized trials and sample sizes are too small to provide a satisfactory level of scientific evidence or statistical power. Unanswered issues include the effective dosage and the optimal dilution and injection modalities of botulinum toxin. Copyright © 2015 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

Cytokine mRNA expression in synovial fluid of affected and contralateral stifle joints and the left shoulder joint in dogs with unilateral disease of the stifle joint.

PubMed

de Bruin, Tanya; de Rooster, Hilde; van Bree, Henri; Duchateau, Luc; Cox, Eric

2007-09-01

To examine mRNA expression of cytokines in synovial fluid (SF) cells from dogs with cranial cruciate ligament (CrCL) rupture and medial patellar luxation (MPL) and determine mRNA expression for 3 joints (affected stifle, unaffected contralateral stifle, and left shoulder joints) in dogs with unilateral CrCL rupture. 29 stifle joints with CrCL rupture (29 dogs), 8 stifle joints with MPL (7 dogs), and 24 normal stifle joints (16 clinically normal dogs). Immediately before reconstructive surgery, SF was aspirated from the cruciate-deficient stifle joint or stifle joint with MPL. Fourteen of 29 dogs had unilateral CrCL rupture; SF was also aspirated from the unaffected contralateral stifle joint and left shoulder joint. Those 14 dogs were examined 6 and 12 months after reconstructive surgery. Total RNA was extracted from SF cells and reverse transcription-PCR assay was performed to obtain cDNA. Canine-specific cytokine mRNA expression was determined by use of a real-time PCR assay. Interleukin (IL)-8 and -10 and interferon-gamma expression differed significantly between dogs with arthropathies and dogs with normal stifle joints. For the 14 dogs with unilateral CrCL rupture, a significant difference was found for IL-8 expression. Before reconstructive surgery, IL-8 expression differed significantly between the affected stifle joint and left shoulder joint or contralateral stifle joint. Six months after surgery, IL-8 expression was significantly increased in the unaffected contralateral stifle joint, compared with the shoulder joint. No conclusions can be made regarding the role of the examined cytokines in initiation of CrCL disease.

Cascade Reverse Osmosis Air Conditioning System: Cascade Reverse Osmosis and the Absorption Osmosis Cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

BEETIT Project: Battelle is developing a new air conditioning system that uses a cascade reverse osmosis (RO)-based absorption cycle. Analyses show that this new cycle can be as much as 60% more efficient than vapor compression, which is used in 90% of air conditioners. Traditional vapor-compression systems use polluting liquids for a cooling effect. Absorption cycles use benign refrigerants such as water, which is absorbed in a salt solution and pumped as liquid—replacing compression of vapor. The refrigerant is subsequently separated from absorbing salt using heat for re-use in the cooling cycle. Battelle is replacing thermal separation of refrigerant withmore » a more efficient reverse osmosis process. Research has shown that the cycle is possible, but further investment will be needed to reduce the number of cascade reverse osmosis stages and therefore cost.« less

A COMPARISON OF STATIC AND DYNAMIC OPTIMIZATION MUSCLE FORCE PREDICTIONS DURING WHEELCHAIR PROPULSION

PubMed Central

Morrow, Melissa M.; Rankin, Jeffery W.; Neptune, Richard R.; Kaufman, Kenton R.

2014-01-01

The primary purpose of this study was to compare static and dynamic optimization muscle force and work predictions during the push phase of wheelchair propulsion. A secondary purpose was to compare the differences in predicted shoulder and elbow kinetics and kinematics and handrim forces. The forward dynamics simulation minimized differences between simulated and experimental data (obtained from 10 manual wheelchair users) and muscle co-contraction. For direct comparison between models, the shoulder and elbow muscle moment arms and net joint moments from the dynamic optimization were used as inputs into the static optimization routine. RMS errors between model predictions were calculated to quantify model agreement. There was a wide range of individual muscle force agreement that spanned from poor (26.4 % Fmax error in the middle deltoid) to good (6.4 % Fmax error in the anterior deltoid) in the prime movers of the shoulder. The predicted muscle forces from the static optimization were sufficient to create the appropriate motion and joint moments at the shoulder for the push phase of wheelchair propulsion, but showed deviations in the elbow moment, pronation-supination motion and hand rim forces. These results suggest the static approach does not produce results similar enough to be a replacement for forward dynamics simulations, and care should be taken in choosing the appropriate method for a specific task and set of constraints. Dynamic optimization modeling approaches may be required for motions that are greatly influenced by muscle activation dynamics or that require significant co-contraction. PMID:25282075

What Factors are Predictive of Patient-reported Outcomes? A Prospective Study of 337 Shoulder Arthroplasties.

PubMed

Matsen, Frederick A; Russ, Stacy M; Vu, Phuong T; Hsu, Jason E; Lucas, Robert M; Comstock, Bryan A

2016-11-01

Although shoulder arthroplasties generally are effective in improving patients' comfort and function, the results are variable for reasons that are not well understood. We posed two questions: (1) What factors are associated with better 2-year outcomes after shoulder arthroplasty? (2) What are the sensitivities, specificities, and positive and negative predictive values of a multivariate predictive model for better outcome? Three hundred thirty-nine patients having a shoulder arthroplasty (hemiarthroplasty, arthroplasty for cuff tear arthropathy, ream and run arthroplasty, total shoulder or reverse total shoulder arthroplasty) between August 24, 2010 and December 31, 2012 consented to participate in this prospective study. Two patients were excluded because they were missing baseline variables. Forty-three patients were missing 2-year data. Univariate and multivariate analyses determined the relationship of baseline patient, shoulder, and surgical characteristics to a "better" outcome, defined as an improvement of at least 30% of the maximal possible improvement in the Simple Shoulder Test. The results were used to develop a predictive model, the accuracy of which was tested using a 10-fold cross-validation. After controlling for potentially relevant confounding variables, the multivariate analysis showed that the factors significantly associated with better outcomes were American Society of Anesthesiologists Class I (odds ratio [OR], 1.94; 95% CI, 1.03-3.65; p = 0.041), shoulder problem not related to work (OR, 5.36; 95% CI, 2.15-13.37; p < 0.001), lower baseline Simple Shoulder Test score (OR, 1.32; 95% CI, 1.23-1.42; p < 0.001), no prior shoulder surgery (OR, 1.79; 95% CI, 1.18-2.70; p = 0.006), humeral head not superiorly displaced on the AP radiograph (OR, 2.14; 95% CI, 1.15-4.02; p = 0.017), and glenoid type other than A1 (OR, 4.47; 95% CI, 2.24-8.94; p < 0.001). Neither preoperative glenoid version nor posterior decentering of the humeral head on the glenoid were associated with the outcomes. The model predictive of a better result was driven mainly by the six factors listed above. The area under the receiver operating characteristic curve generated from the cross-validated enhanced predictive model was 0.79 (generally values of 0.7 to 0.8 are considered fair and values of 0.8 to 0.9 are considered good). The false-positive fraction and the true-positive fraction depended on the cutoff probability selected (ie, the selected probability above which the prediction would be classified as a better outcome). A cutoff probability of 0.68 yielded the best performance of the model with cross-validation predictions of better outcomes for 236 patients (80%) and worse outcomes for 58 patients (20%); sensitivity of 91% (95% CI, 88%-95%); specificity of 65% (95% CI, 53%-77%); positive predictive value of 92% (95% CI, 88%-95%); and negative predictive value of 64% (95% CI, 51%-76%). We found six easy-to-determine preoperative patient and shoulder factors that were significantly associated with better outcomes of shoulder arthroplasty. A model based on these characteristics had good predictive properties for identifying patients likely to have a better outcome from shoulder arthroplasty. Future research could refine this model with larger patient populations from multiple practices. Level II, therapeutic study.

Biomechanical evaluation of different designs of glenospheres in the SMR reverse total shoulder prosthesis: range of motion and risk of scapular notching.

PubMed

Chou, Justin; Malak, Sharif F; Anderson, Iain A; Astley, Tim; Poon, Peter C

2009-01-01

Reverse total shoulder arthroplasty is a treatment option for cuff tear arthropathy. Scapular notching remains a concern. This biomechanical study compared the range-of-motion in different designs of glenospheres and hence the relative risk of scapular notching. A precision coordinate device was used to investigate four different designs of glenospheres (SMR prosthesis); 36 mm concentric (Standard), 36 mm eccentric, 44 mm concentric, and 44 mm eccentric glenospheres. The centre of rotation in each design was first established. The position of the humeral prosthesis was recorded in the plane of the scapula to compare the degree of adduction and the total range-of-motion. Eccentric glenospheres were found to improve range-of-motion by allowing a higher degree of adduction. Larger diameter glenospheres were found to improve range-of-motion by increasing adduction and abduction. Compared to the 36 mm concentric (standard) glenosphere, the 36 mm eccentric glenosphere improved adduction by 14.5 degrees, the 44 mm concentric glenosphere improved adduction by 11.6 degrees, the 44 mm eccentric glenosphere improved adduction by 17.7 degrees. Eccentric glenospheres with a center-of-rotation placed more inferiorly were shown to improve adduction. This design may reduce the clinical incidence of scapular notching.

East Europe Report, Economic and Industrial Affairs

DTIC Science & Technology

1984-08-30

an average fertility per 100 head of breeding stock of 86-90 calves, 111-120 lambs and 1,700-1,800 pigs." These high objectively determined targets...river harbors and factories processing imported raw materials, and fights for its survival on the oversalted soft shoulders of highways with heavy...old sooty coal heaters was replaced by traffic " ’ says Bela Donath, department head of the OKTH. ’ "Recently, together with the Ministry of

[Therapy relevant imaging in modern surgical treatment of arthrosis of the shoulder: interesting facts for orthopedic surgeons].

PubMed

Krifter, R M; Zweiger, C; Lick-Schiffer, W; Mattiassich, G; Schüller-Weidekamm, C; Radl, R

2013-03-01

Imaging for shoulder surgery varies a lot nowadays. Advantages and disadvantages of possible imaging methods according to the pathology and treatment options are described. Digital projection radiography in 3 planes, ultrasonography, MRI, CT scanning and scintigrams. Special axial view to visualize the glenoid situation, as well as 3-D CT scanning for larger defects and classification. Imaging of the glenoid situation, the version and erosion in axial view x-ray is mandatory to plan and control glenoid replacement. Useful application of imaging methods for the daily routine of orthopedic surgeons. Digital 3 plane x-ray imaging in arthroplasty surgery is the minimum requirement. For rotator cuff lesions ultrasonography is good. In order to gain information on fatty infiltration of rotator muscles MRI is needed as well as for intra-articular lesions. For bony defects CT and reconstruction 3-D are recommended.

Arthroscopic suture bridge technique for intratendinous tear of rotator cuff in chronically painful calcific tendinitis of the shoulder.

PubMed

Ji, Jong-Hun; Shafi, Mohamed; Moon, Chang-Yun; Park, Sang-Eun; Kim, Yeon-Jun; Kim, Sung-Eun

2013-11-01

Arthroscopic removal, now the main treatment option, has almost replaced open surgery for treatment of resistant calcific tendinitis. In some cases of chronic calcific tendinitis of the shoulder, the calcific materials are hard and adherent to the tendon. Removal of these materials can cause significant intratendinous tears between the superficial and deep layers of the degenerated rotator cuff. Thus far, there are no established surgical techniques for removing the calcific materials while ensuring cuff integrity. Good clinical results for rotator cuff repair were achieved by using an arthroscopic suture bridge technique in patients with long-standing calcific tendinitis. Intact rotator cuff integrity and recovery of signal change on follow-up magnetic resonance imaging scans were confirmed. This is a technical note about a surgical technique and its clinical results with a review of relevant published reports. © 2013 Chinese Orthopaedic Association and Wiley Publishing Asia Pty Ltd.

Regional analgesia for improvement of long-term functional outcome after elective large joint replacement

PubMed Central

Atchabahian, Arthur; Schwartz, Gary; Hall, Charles B; Lajam, Claudette M; Andreae, Michael H

2015-01-01

Background Regional analgesia is more effective than conventional analgesia for controlling pain and may facilitate rehabilitation after large joint replacement in the short term. It remains unclear if regional anaesthesia improves functional outcomes after joint replacement beyond three months after surgery. Objectives To assess the effects of regional anaesthesia and analgesia on long-term functional outcomes 3, 6 and 12 months after elective major joint (knee, shoulder and hip) replacement surgery. Search methods We performed an electronic search of several databases (CENTRAL, MEDLINE, EMBASE, CINAHL), and handsearched reference lists and conference abstracts. We updated our search in June 2015. Selection criteria We included randomized controlled trials (RCTs) comparing regional analgesia versus conventional analgesia in patients undergoing total shoulder, hip or knee replacement. We included studies that reported a functional outcome with a follow-up of at least three months after surgery. Data collection and analysis We used standard methodological procedures expected by Cochrane. We contacted study authors for additional information. Main results We included six studies with 350 participants followed for at least three months. All of these studies enrolled participants undergoing total knee replacement. Studies were at least partially blinded. Three studies had a high risk of performance bias and one a high risk of attrition bias, but the risk of bias was otherwise unclear or low. Only one study assessed joint function using a global score. Due to heterogeneity in outcome and reporting, we could only pool three out of six RCTs, with range of motion assessed at three months after surgery used as a surrogate for joint function. All studies had a high risk of detection bias. Using the random-effects model, there was no statistically significant difference between the experimental and control groups (mean difference 3.99 degrees, 95% confidence interval (CI) − 2.23 to 10.21; P value = 0.21, 3 studies, 140 participants, very low quality evidence). We did not perform further analyses because immediate adverse effects were not part of the explicit outcomes of any of these typically small studies, and long-term adverse events after regional anaesthesia are rare. None of the included studies elicited or reported long-term adverse effects like persistent nerve damage. Authors’ conclusions More high-quality studies are needed to establish the effects of regional analgesia on function after major joint replacement, as well as on the risk of adverse events (falls). PMID:26269416

Simulation in shoulder surgery.

PubMed

Colaço, Henry B; Tennent, Duncan

2016-10-01

Simulation is a rapidly developing field in medical education. There is a growing need for trainee surgeons to acquire surgical skills in a cost-effective learning environment to improve patient safety and compensate for a reduction in training time and operative experience. Although simulation is not a replacement for traditional models of surgical training, and robust assessment metrics need to be validated before widespread use for accreditation, it is a useful adjunct that may ultimately lead to improving surgical outcomes for our patients.

Improvements in survival of the uncemented Nottingham Total Shoulder prosthesis: a prospective comparative study

PubMed Central

Rosenberg, Nahum; Neumann, Lars; Modi, Amit; Mersich, Istvan J; Wallace, Angus W

2007-01-01

Background The uncemented Nottingham Total Shoulder Replacement prosthesis system (Nottingham TSR) was developed from the previous BioModular® shoulder prosthesis taking into consideration the causes of the initial implant's failure. We investigated the impact of changes in the design of Nottingham TSR prosthesis on its survivorship rate. Methods Survivorship analyses of three types of uncemented total shoulder arthroplasty prostheses (BioModular®, initial Nottingham TSR and current Nottingham TSR systems with 11, 8 and 4 year survivorship data respectively) were compared. All these prostheses were implanted for the treatment of disabling pain in the shoulder due to primary and secondary osteoarthritis or rheumatoid arthritis. Each type of the prosthesis studied was implanted in consecutive group of patients – 90 patients with BioModular® system, 103 with the initial Nottingham TSR and 34 patients with the current Nottingham TSR system. The comparison of the annual cumulative survivorship values in the compatible time range between the three groups was done according to the paired t test. Results The 8-year and 11-year survivorship rates for the initially used modified BioModular® uncemented prosthesis were relatively low (75.6% and 71.7% respectively) comparing to the reported survivorship of the conventional cemented implants. The 8-year survivorship for the uncemented Nottingham TSR prosthesis was significantly higher (81.8%), but still not in the desired range of above 90%, that is found in other cemented designs. Glenoid component loosening was the main factor of prosthesis failure in both prostheses and mainly occurred in the first 4 postoperative years. The 4-year survivorship of the currently re-designed Nottingham TSR prosthesis, with hydroxylapatite coating of the glenoid baseplate, was significantly higher, 93.1% as compared to 85.1% of the previous Nottingham TSR. Conclusion The initial Nottingham shoulder prosthesis showed significantly higher survivorship than the BioModular® uncemented prosthesis, but lower than expected. Subsequently re-designed Nottingham TSR system presented a high short term survivorship rate that encourages its ongoing use PMID:17683577

Topographical anatomy of the suprascapular nerve and vessels at the suprascapular notch.

PubMed

Yang, Hee-Jun; Gil, Young-Chun; Jin, Jeong-Doo; Ahn, Song Vogue; Lee, Hye-Yeon

2012-04-01

Suprascapular nerve entrapment caused by the superior transverse scapular ligament (STSL) causes pain, and limitation of motion in the shoulder. To relieve these symptoms, suprascapular nerve decompression is performed through the resection of STSL. To describe and classify the topographic anatomy of the suprascapular notch, 103 cadaveric shoulders were dissected. The mean length and width of STSLs were 11.2 and 3.4 mm, respectively. The bony bridges replacing STSL in four shoulders were 8.2 mm long and 3.5 mm wide on average. The suprascapular nerve always ran through the notch under the STSL. All shoulders had a single suprascapular artery, while multiple suprascapular veins appeared in 21.3%. The arrangement of the suprascapular vessels was classified into three types: in Type I (59.4%), all suprascapular vessels ran over the STSL; in Type II (29.7%), the vessels ran over and under the STSL simultaneously; in Type III (10.9%), all vessels ran under the STSL. In 48.9% of cadavers, these types were bilaterally matched. The omohyoid muscle originated distantly from the STSL in 38.0%, was adjacent to it in 44.0%, and was partially over the STSL in 18.0%. The number of suprascapular vessels running under the STSL was positively correlated with the size of the STSL and the middle diameter of the suprascapular notch. Age was inversely correlated with the length of STSL. The STSL was wider in males than in females. This study provides details of the structural variations in the region of the suprascapular notch. Copyright © 2011 Wiley Periodicals, Inc.

CT measurement of glenoid erosion in arthritis.

PubMed

Mullaji, A B; Beddow, F H; Lamb, G H

1994-05-01

We studied serial CT scans of 45 arthritic shoulders (34 rheumatoid, 11 osteoarthritic) and 19 normal shoulders, making measurements at three levels on axial images. The maximum anteroposterior diameter of the glenoid was increased in rheumatoid glenoids at the upper and middle levels by 6 mm and in osteoarthritic glenoids at all levels by 5 to 8 mm as compared with normal. In rheumatoid cases, nearly half the available surface of the glenoid was of unsupported bone, mainly posteriorly at the upper and middle levels. In osteoarthritic glenoids, the best supported bone was anterior at the upper level and central at the middle and lower levels. The depth of the rheumatoid glenoid was reduced by a mean of 6 mm at the upper and middle levels and by 3 mm at the lower level. This inclined the surface of the glenoid superiorly. The depth at the middle level in osteoarthritis was reduced by a mean of 5 mm, suggesting central protrusion. Osteoarthritic glenoids were retroverted by a mean of 12.5 degrees, but of rheumatoid glenoids two-thirds were retroverted (mean 15.1 degrees) and one-third anteverted (mean 8.2 degrees). Our findings have important implications for the planning and placement of the glenoid component of total shoulder replacements; CT can provide useful information.

A review of current surgical practice in the operative treatment of proximal humeral fractures

PubMed Central

Jones, L. D.; Palmer, A. J. R.; Macnair, R. D.; Brewer, P. E.; Jayadev, C.; Wheelton, A. N.; Ball, D. E. J.; Nandra, R. S.; Aujla, R. S.; Sykes, A. E.; Carr, A. J.

2016-01-01

Objectives The PROximal Fracture of the Humerus: Evaluation by Randomisation (PROFHER) trial has recently demonstrated that surgery is non-superior to non-operative treatment in the management of displaced proximal humeral fractures. The objective of this study was to assess current surgical practice in the context of the PROFHER trial in terms of patient demographics, injury characteristics and the nature of the surgical treatment. Methods A total of ten consecutive patients undergoing surgery for the treatment of a proximal humeral fracture from each of 11 United Kingdom hospitals were retrospectively identified over a 15 month period between January 2014 and March 2015. Data gathered for the 110 patients included patient demographics, injury characteristics, mode of surgical fixation, the grade of operating surgeon and the cost of the surgical implants. Results A majority of the patients were female (66%, 73 of 110). The mean patient age was 62 years (range 18 to 89). A majority of patients met the inclusion criteria for the PROFHER trial (75%, 83 of 110). Plate fixation was the most common mode of surgery (68%, 75 patients), followed by intramedullary fixation (12%, 13 patients), reverse shoulder arthroplasty (10%, 11 patients) and hemiarthroplasty (7%, eight patients). The consultant was either the primary operating surgeon or supervising the operating surgeon in a large majority of cases (91%, 100 patients). Implant costs for plate fixation were significantly less than both hemiarthroplasty (p < 0.05) and reverse shoulder arthroplasty (p < 0.0001). Implant costs for intramedullary fixation were significantly less than plate fixation (p < 0.01), hemiarthroplasty (p < 0.0001) and reverse shoulder arthroplasty (p < 0.0001). Conclusions Our study has shown that the majority of a representative sample of patients currently undergoing surgical treatment for a proximal humeral fracture in these United Kingdom centres met the inclusion criteria for the PROFHER trial and that a proportion of these patients may, therefore, have been effectively managed non-operatively. Cite this article: Mr B. J. F. Dean. A review of current surgical practice in the operative treatment of proximal humeral fractures: Does the PROFHER trial demonstrate a need for change? Bone Joint Res 2016;5:178–184. DOI: 10.1302/2046-3758.55.2000596. PMID:27179004

A review of current surgical practice in the operative treatment of proximal humeral fractures: Does the PROFHER trial demonstrate a need for change?

PubMed

Dean, B J F; Jones, L D; Palmer, A J R; Macnair, R D; Brewer, P E; Jayadev, C; Wheelton, A N; Ball, D E J; Nandra, R S; Aujla, R S; Sykes, A E; Carr, A J

2016-05-01

The PROximal Fracture of the Humerus: Evaluation by Randomisation (PROFHER) trial has recently demonstrated that surgery is non-superior to non-operative treatment in the management of displaced proximal humeral fractures. The objective of this study was to assess current surgical practice in the context of the PROFHER trial in terms of patient demographics, injury characteristics and the nature of the surgical treatment. A total of ten consecutive patients undergoing surgery for the treatment of a proximal humeral fracture from each of 11 United Kingdom hospitals were retrospectively identified over a 15 month period between January 2014 and March 2015. Data gathered for the 110 patients included patient demographics, injury characteristics, mode of surgical fixation, the grade of operating surgeon and the cost of the surgical implants. A majority of the patients were female (66%, 73 of 110). The mean patient age was 62 years (range 18 to 89). A majority of patients met the inclusion criteria for the PROFHER trial (75%, 83 of 110). Plate fixation was the most common mode of surgery (68%, 75 patients), followed by intramedullary fixation (12%, 13 patients), reverse shoulder arthroplasty (10%, 11 patients) and hemiarthroplasty (7%, eight patients). The consultant was either the primary operating surgeon or supervising the operating surgeon in a large majority of cases (91%, 100 patients). Implant costs for plate fixation were significantly less than both hemiarthroplasty (p < 0.05) and reverse shoulder arthroplasty (p < 0.0001). Implant costs for intramedullary fixation were significantly less than plate fixation (p < 0.01), hemiarthroplasty (p < 0.0001) and reverse shoulder arthroplasty (p < 0.0001). Our study has shown that the majority of a representative sample of patients currently undergoing surgical treatment for a proximal humeral fracture in these United Kingdom centres met the inclusion criteria for the PROFHER trial and that a proportion of these patients may, therefore, have been effectively managed non-operatively.Cite this article: Mr B. J. F. Dean. A review of current surgical practice in the operative treatment of proximal humeral fractures: Does the PROFHER trial demonstrate a need for change? Bone Joint Res 2016;5:178-184. DOI: 10.1302/2046-3758.55.2000596. © 2016 Dean et al.

Scapular Notching on Kinematic Simulated Range of Motion After Reverse Shoulder Arthroplasty Is Not the Result of Impingement in Adduction

PubMed Central

Lädermann, Alexandre; Gueorguiev, Boyko; Charbonnier, Caecilia; Stimec, Bojan V.; Fasel, Jean H.D.; Zderic, Ivan; Hagen, Jennifer; Walch, Gilles

2015-01-01

Abstract Impingement after reverse shoulder arthroplasty (RSA) is believed to occur from repetitive contact in adduction between the humeral component and the inferior scapular pillar. The primary purpose of this biomechanical study was to confirm the presence of different types of impingement and to examine which daily-life movements are responsible for them. A secondary aim was to provide recommendations on the type of components that would best minimize notching and loss of range of motion (ROM). The study included 12 fresh frozen shoulder specimens; each had a computed tomography (CT) image of the entire scapula and humerus in order to acquire topological information of the bones before RSA implantation. Cyclic tests were run postimplantation with 3 shoulders in each modalities. To quantify bone loss due to impingement, 3-dimensional anatomical models of the scapula were reconstructed from the CT scans and compared to their intact states. We found 8 bony impingements in 7 specimens: 2 at the lateral acromion, 1 at the inferior acromion, 4 scapular notching, and 1 with the glenoid resulting to wear at the 3:00 to 6:00 clock-face position. Impingements occurred in all kinds of tested motions, except for the internal/external rotation at 90° of abduction. The 3 specimens tested in abduction/adduction presented bone loss on the acromion side only. Scapular notching was noted in flexion/extension and in internal/external rotation at 0° of abduction. The humeral polyethylene liner was worn in 2 specimens—1 at the 6:00 to 8:00 clock-face position during internal/external rotation at 0° of abduction and 1 at the 4:00 clock-face position during flexion/extension. The present study revealed that 2 types of impingement interactions coexist and correspond to a frank abutment or lead to a scapular notching (friction-type impingement). Scapular notching seems to be caused by more movements or combination of movements than previously considered, and in particular by movements of flexion/extension and internal/external rotation with the arm at the side. Polyethylene cups with a notch between 3 and 9 o’clock and lower neck-shaft angle (145° or 135°) may play an important role in postoperative ROM limiting scapular notching. PMID:26402829

Comparison of Clinical and Radiological Results according to Glenosphere Position in Reverse Total Shoulder Arthroplasty: A Short-term Follow-up Study.

PubMed

Choi, Chang Hyuk; Kim, Sung Guk; Lee, Jae Jun; Kwack, Byung Hoon

2017-03-01

In a previous biomechanical study, eccentric glenospheres with more inferior position of the center of rotation were shown to improve range of motion and reduce the incidence of scapular notching after reverse total shoulder arthroplasty (RSA). The purpose of this study was to compare the clinical and radiological results of RSA using an eccentric glenosphere to those using a concentric glenosphere and to determine the usefulness of the eccentric glenosphere. From 2009 to 2015, we performed a retrospective review of 20 consecutive patients who underwent RSA using a deltopectoral approach. Nine patients underwent RSA using a concentric glenosphere (group A) while 11 had an eccentric glenosphere (group B). The average follow-up period was 13.9 months (range, 12 to 18 months). All glenoid components were placed with 15° of inferior tilt. Clinical results were assessed using the visual analog pain scale score (VAS), the American Shoulder and Elbow Surgeon (ASES) score, the Korean shoulder scoring system (KSS), and the Constant score. On radiological evaluation, prosthesisscapular neck angle (PSNA), peg-glenoid rim distance (PGRD), scapular neck-inferior glenoshere rim distance (inferior glenoshpere overhang), acromion-greater tuberosity (AT) distance, glenoid-greater tuberosity (GT) distance, and severity of notching according to the Nerot-Sirveaux classification were assessed. The clinical results improved significantly in both groups, but there was no statistically significant difference between the two groups. A significant intergroup difference was observed with regard to PGRD (24.8 ± 1.6 mm for group A vs. 22.2 ± 1.9 mm for group B; p = 0.002) and inferior glenosphere overhang (2.0 ± 1.7 mm for group A vs. 5.8 ± 1.6 mm for group B; p = 0.000). Seven of 9 patients in group A developed notching compared with 2 of 11 patients in group B ( p = 0.022). The other radiological parameters such as inferior tilt and AT and GT distances were not significantly different between two groups. Complications such as loosening and scapular fractures did not occur. The eccentric glenosphere in RSA was more effective in reducing the rate of notching than the concentric glenosphere although clinical outcomes were not significantly different in the short-term follow-up.

Scapula fracture incidence in reverse total shoulder arthroplasty using screws above or below metaglene central cage: clinical and biomechanical outcomes.

PubMed

Kennon, Justin C; Lu, Caroline; McGee-Lawrence, Meghan E; Crosby, Lynn A

2017-06-01

Reverse total shoulder arthroplasty (RTSA) is a viable treatment option for rotator cuff tear arthropathy but carries a complication risk of scapular fracture. We hypothesized that using screws above the central glenoid axis for metaglene fixation creates a stress riser contributing to increased scapula fracture incidence. Clinical type III scapular fracture incidence was determined with screw placement correlation: superior screw vs. screws placed exclusively below the glenoid midpoint. Cadaveric RTSA biomechanical modeling was employed to analyze scapular fractures. We reviewed 318 single-surgeon single-implant RTSAs with screw correlation to identify type III scapular fractures. Seventeen cadaveric scapula specimens were matched for bone mineral density, metaglenes implanted, and fixation with 2 screw configurations: inferior screws alone (group 1 INF ) vs. inferior screws with one additional superior screw (group 2 SUP ). Biomechanical load to failure was analyzed. Of 206 patients, 9 (4.4%) from the superior screw group experienced scapula fractures (type III); 0 fractures (0/112; 0%) were identified in the inferior screw group. Biomechanically, superior screw constructs (group 2 SUP ) demonstrated significantly (P < .05) lower load to failure (1077 N vs. 1970 N) compared with constructs with no superior screws (group 1 INF ). There was no significant age or bone mineral density discrepancy. Clinical scapular fracture incidence significantly decreased (P < .05) for patients with no screws placed above the central cage compared with patients with superior metaglene screws. Biomechanical modeling demonstrates significant construct compromise when screws are used above the central cage, fracturing at nearly half the ultimate load of the inferior screw constructs. We recommend use of inferior screws, all positioned below the central glenoid axis, unless necessary to stabilize the metaglene construct. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Reverse shoulder glenoid baseplate fixation: a comparison of flat-back versus curved-back designs and oval versus circular designs with 2 different offset glenospheres.

PubMed

Roche, Christopher P; Stroud, Nicholas J; Flurin, Pierre-Henri; Wright, Thomas W; Zuckerman, Joseph D; DiPaola, Matthew J

2014-09-01

In this glenoid loosening study, we compared the fixation strength of multiple generic reverse shoulder glenoid baseplates that differed only in backside geometry and shape and size to optimize design from a fixation perspective. The fixation strength of 4 generic baseplates was quantified in a low-density polyurethane substrate to isolate the contribution of baseplate profile and size (25 mm circular vs 25 × 34 mm oval) and backside geometry (flat back vs curved back) on fixation using 2 center-of-rotation glenospheres (0 mm and 10 mm lateral). The cyclic test simulated 55° of abduction as a 750 N load was continuously applied to induce a variable shear and compressive load. Before and after cyclic loading, baseplate displacement was measured in the directions of the applied static shear and compressive loads. Each generic baseplate was cyclically tested 7 times with each offset glenosphere for a total of 56 samples. Circular baseplates were associated with significantly more shear displacement in both the superior-inferior (SI) and anterior-posterior (AP) directions after cyclic loading than oval baseplates. No such significant differences in fixation were observed between flat-back and curved-back baseplates. Circular baseplates were also associated with significantly more SI and AP shear displacement with 10 mm glenospheres than with 0 mm glenospheres. No significant difference in SI or AP motion was observed with oval baseplates between 0 mm and 10 mm glenospheres. Our results suggest that baseplate shape and size affects fixation strength more than backside geometry. The 25 × 34 mm oval baseplates showed better fixation characteristics than their 25 mm circular counterparts; no discernible difference in fixation was observed between flat-back and curved-back baseplates. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

From platelet-rich plasma to the reverse prosthesis: controversies in treating rotator cuff pathology.

PubMed

Craig, Edward V; Galatz, Leesa M; Sperling, John W

2014-01-01

Rotator cuff pathology and tearing remains a common cause of shoulder pain and disability. Although little controversy and disagreement exists regarding the treatment of small to moderate size tears in good quality tissue without retraction, there is difficulty in agreeing on the ideal treatment of the largest tears, particularly because those tears may be accompanied by widely variable levels of pain and function. Clinical decision making is made more difficult because of the variable presentations observed in patients with a documented full-thickness rotator cuff tear: some have good function and no pain, some have good function and pain, some have poor function and no pain, and some have both poor function and pain. The role of biologics as an adjunct in treating most rotator cuff tears remains unclear, with ongoing exploration of the roles of stem cells, growth factors, and platelet-rich plasma. In patients with unreconstructable tears with marked weakness in external rotation but good elevation, a latissimus transfer may restore rotation. Patches may play a role in partial repairs while serving as both a lattice for healing and a biomechanical anchoring point for sutures. In patients with massive tears and arthritis and in many who have rotator cuff insufficiency, pseudoparalysis, or anterosuperior escape without arthritis, reverse shoulder arthroplasty has led to improvements in pain and strength and revolutionized the treatment of rotator cuff tears.

Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses.

PubMed

Mattei, Lorenza; Di Puccio, Francesca; Joyce, Thomas J; Ciulli, Enrico

2015-03-01

In the present study, numerical and experimental wear investigations on reverse total shoulder arthroplasties (RTSAs) were combined in order to estimate specific wear coefficients, currently not available in the literature. A wear model previously developed by the authors for metal-on-plastic hip implants was adapted to RTSAs and applied in a double direction: firstly, to evaluate specific wear coefficients for RTSAs from experimental results and secondly, to predict wear distribution. In both cases, the Archard wear law (AR) and the wear law of UHMWPE (PE) were considered, assuming four different k functions. The results indicated that both the wear laws predict higher wear coefficients for RTSA with respect to hip implants, particularly the AR law, with k values higher than twofold the hip ones. Such differences can significantly affect predictive wear model results for RTSA, when non-specific wear coefficients are used. Moreover, the wear maps simulated with the two laws are markedly different, although providing the same wear volume. A higher wear depth (+51%) is obtained with the AR law, located at the dome of the cup, while with the PE law the most worn region is close to the edge. Taking advantage of the linear trend of experimental volume losses, the wear coefficients obtained with the AR law should be valid despite having neglected the geometry update in the model. Copyright © 2015 Elsevier Ltd. All rights reserved.

Rotational biomechanics of the elite golf swing: benchmarks for amateurs.

PubMed

Meister, David W; Ladd, Amy L; Butler, Erin E; Zhao, Betty; Rogers, Andrew P; Ray, Conrad J; Rose, Jessica

2011-08-01

The purpose of this study was to determine biomechanical factors that may influence golf swing power generation. Three-dimensional kinematics and kinetics were examined in 10 professional and 5 amateur male golfers. Upper-torso rotation, pelvic rotation, X-factor (relative hip-shoulder rotation), O-factor (pelvic obliquity), S-factor (shoulder obliquity), and normalized free moment were assessed in relation to clubhead speed at impact (CSI). Among professional golfers, results revealed that peak free moment per kilogram, peak X-factor, and peak S-factor were highly consistent, with coefficients of variation of 6.8%, 7.4%, and 8.4%, respectively. Downswing was initiated by reversal of pelvic rotation, followed by reversal of upper-torso rotation. Peak X-factor preceded peak free moment in all swings for all golfers, and occurred during initial downswing. Peak free moment per kilogram, X-factor at impact, peak X-factor, and peak upper-torso rotation were highly correlated to CSI (median correlation coefficients of 0.943, 0.943, 0.900, and 0.900, respectively). Benchmark curves revealed kinematic and kinetic temporal and spatial differences of amateurs compared with professional golfers. For amateurs, the number of factors that fell outside 1-2 standard deviations of professional means increased with handicap. This study identified biomechanical factors highly correlated to golf swing power generation and may provide a basis for strategic training and injury prevention.

Determination of a safe INR for joint injections in patients taking warfarin.

PubMed

Bashir, M A; Ray, R; Sarda, P; Li, S; Corbett, S

2015-11-01

With an increase in life expectancy in 'developed' countries, the number of elderly patients receiving joint injections for arthritis is increasing. There are legitimate concerns about an increased risk of thromboembolism if anticoagulation is stopped or reversed for such an injection. Despite being a common dilemma, the literature on this issue is scarce. We undertook 2,084 joint injections of the knee and shoulder in 1,714 patients between August 2008 and December 2013. Within this cohort, we noted 41 patients who were taking warfarin and followed them immediately after joint injection in the clinic or radiology department, looking carefully for complications. Then, we sought clinical follow-up, correspondence, and imaging evidence for 4 weeks, looking for complications from these joint injections. We recorded International Normalised Ratio (INR) values before injection. No complications were associated with the procedure after any joint injection. The radiologists who undertook ultrasound-guided injections to shoulders re-scanned the joints looking for haemarthroses: they found none. A similar outcome was noted clinically after injections in the outpatient setting. With a mean INR of 2.77 (range, 1.7-5.5) and a maximum INR within this group of 5.5, joint injections to the shoulder and knee can be undertaken safely in primary or secondary care settings despite the patient taking warfarin.

Biomechanical evaluation of a novel reverse coracoacromial ligament reconstruction for acromioclavicular joint separation.

PubMed

Shu, Beatrice; Johnston, Tyler; Lindsey, Derek P; McAdams, Timothy R

2012-02-01

Enhancing anterior-posterior (AP) stability in acromioclavicular (AC) reconstruction may be advantageous. To compare the initial stability of AC reconstructions with and without augmentation by either (1) a novel "reverse" coracoacromial (CA) ligament transfer or (2) an intramedullary AC tendon graft. Reverse CA transfer will improve AP stability compared with isolated coracoclavicular (CC) reconstruction. Controlled laboratory study. Six matched pairs of cadaveric shoulders underwent distal clavicle resection and CC reconstruction. Displacement (mm) was measured during cyclic loading along AP (±25 N) and superior-inferior (SI; 10-N compression, 70-N tension) axes. Pairs were randomized to receive each augmentation and the same loading protocol applied. Reverse CA transfer (3.71 ± 1.3 mm, standard error of the mean [SEM]; P = .03) and intramedullary graft (3.41 ± 1.1 mm; P = .03) decreased AP translation compared with CC reconstruction alone. The SI displacement did not differ. Equivalence tests suggest no difference between augmentations in AP or SI restraint. Addition of either reverse CA transfer or intramedullary graft demonstrates improved AP restraint and provides similar SI stability compared with isolated CC reconstruction. Reverse CA ligament transfer may be a reasonable alternative to a free tendon graft to augment AP restraint in AC reconstruction.

Partial rotator cuff repair and biceps tenotomy for the treatment of patients with massive cuff tears and retained overhead elevation: midterm outcomes with a minimum 5 years of follow-up.

PubMed

Cuff, Derek J; Pupello, Derek R; Santoni, Brandon G

2016-11-01

A subset of patients with massive irreparable rotator cuff tears present with retained overhead elevation and pain as their primary complaint. Our aim was to evaluate the outcomes of partial arthroscopic rotator cuff repair with biceps tenotomy and to report the failure rate of this procedure for patients with >5 years of follow-up. Thirty-four patients underwent partial rotator cuff repair and biceps tenotomy for treatment of a massive rotator cuff tear. Patients had preoperative active forward elevation >120° and no radiographic evidence of glenohumeral arthritis. Patients were followed up clinically and radiographically, and 28 patients had a minimum of 5 years of follow-up. Failure was defined as an American Shoulder and Elbow Surgeons score of <70, loss of active elevation >90°, or revision to reverse shoulder arthroplasty during the study period. Patients demonstrated improvements in average preoperative to postoperative American Shoulder and Elbow Surgeons scores (46.6 to 79.3 [P < .001]) and Simple Shoulder Test scores (5.7 to 9.1 [P < .001]) along with decrease in visual analog scale for pain scores (6.9 to 1.9 [P < .001]). No significant change in forward elevation (168° to 154° [P = .07]), external rotation (38° to 39° [P = 1.0]), or internal rotation (84% to 80% [P = 1.0]) was identified; 36% of patients had progression of the Hamada stage. The failure rate was 29%; 75% of patients were satisfied with their index procedure. Partial rotator cuff repair and biceps tenotomy for patients with massive irreparable rotator cuff tears with retained overhead elevation and pain as the primary complaint produced reasonable outcomes at midterm follow-up of at least 5 years. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Continuum theory for cluster morphologies of soft colloids.

PubMed

Kosmrlj, A; Pauschenwein, G J; Kahl, G; Ziherl, P

2011-06-09

We introduce a continuum description of the thermodynamics of colloids with a core-corona architecture. In the case of thick coronas, their overlap can be treated approximately by replacing the exact one-particle density distribution by a suitably shaped step profile, which provides a convenient way of modeling the spherical, columnar, lamellar, and inverted cluster morphologies predicted by numerical simulations and the more involved theories. We use the model to study monodisperse particles with the hard-core/square-shoulder pair interaction as the simplest representatives of the core-corona class. We derive approximate analytical expressions for the enthalpies of the cluster morphologies which offer a clear insight into the mechanisms at work, and we calculate the lattice spacing and the cluster size for all morphologies of the phase sequence as well as the phase-transition pressures. By comparing the results with the exact crystalline minimum-enthalpy configurations, we show that the accuracy of the theory increases with shoulder width. We discuss possible extensions of the theory that could account for the finite-temperature effects.

Time-dependent changes after latissimus dorsi transfer: tenodesis or tendon transfer?

PubMed

Erşen, Ali; Ozben, Hakan; Demirhan, Mehmet; Atalar, Ata Can; Kapıcıoğlu, Mehmet

2014-12-01

Transfer of the latissimus dorsi tendon to the posterosuperior part of the rotator cuff is an option in active patients with massive rotator cuff tears to restore shoulder elevation and external rotation. However, it is unknown whether this treatment prevents progression of cuff tear arthropathy. The purpose of this study was to determine whether the observed improvement in shoulder function in the early postoperative period with latissimus dorsi tendon transfer for irreparable rotator cuff tears will be permanent or will deteriorate in the midterm period (at 1-5 years after surgery). During a 6-year period, we performed 11 latissimus dorsi tendon transfers in 11 patients for patients with massive, irreparable, chronic tears of the posterosuperior part of the rotator cuff (defined as > 5 cm supraspinatus and infraspinatus tendon tears with Goutallier Grade 3 to 4 fatty infiltration on MRI), for patients who were younger than 65 years of age, and had high functional demands and intact subscapularis function. No patients were lost to followup; minimum followup was 12 months (median, 33 months; range, 12-62 months). The mean patient age was 55 years (median, 53 years; range, 47-65 years). Shoulder forward elevation, external rotation, and Constant-Murley and American Shoulder and Elbow Surgeons scores were assessed. Pain was assessed by a 0- to 10-point visual analog scale. Acromiohumeral distance and cuff tear arthropathy (staged according to the Hamada classification) were evaluated on radiographs. Shoulder forward elevation, external rotation, Constant-Murley scores, and American Shoulder and Elbow Surgeons scores improved at 6 months. However, although shoulder motion values and Constant-Murley scores remained unchanged between the 6-month and latest evaluations, American Shoulder and Elbow Surgeons scores decreased in this period (median, 71; range, 33-88 versus median, 68; range, 33-85; p = 0.009). Visual analog scale scores improved between the preoperative and 6-month evaluations but then worsened (representing worse pain) between the 6-month and latest evaluations (median, 2; range, 0-5 versus median, 2; range, 1-6; p = 0.034), but scores at latest followup were still lower than preoperative values (median, 7; range, 4-8; p = 0.003). Although acromiohumeral distance values were increased at 6 months (median, 8 mm; range, 6-10 mm; p = 0.023), the values at latest followup (median, 8 mm; range, 5-10 mm) were no different from the preoperative ones (mean, 7 mm; range, 6-9 mm; p > 0.05). According to Hamada classification, all patients were Grade 1 both pre- and postoperatively, except one who was Grade 3 at latest followup. The latissimus dorsi tendon transfer may improve shoulder function in irreparable massive rotator cuff tears. However, because the tenodesis effect loses its strength with time, progression of the arthropathy should be expected over time. Nevertheless, latissimus dorsi tendon transfer may help to delay the need for reverse shoulder arthroplasty for these patients. Level IV, therapeutic study. See Instructions for Authors for a complete description of levels of evidence.

Reversal learning in gonadectomized marmosets with and without hormone replacement: are males more sensitive to punishment?

PubMed

LaClair, Matthew; Lacreuse, Agnès

2016-05-01

This study examined sex differences in executive function in middle-aged gonadectomized marmosets (Callithrix jacchus) with or without hormonal replacement. We tested ten castrated male (mean age 5.5 years) marmosets treated with testosterone cypionate (T, n = 5) or vehicle (n = 5) on Reversal Learning, which contributes to cognitive flexibility, and the Delayed Response task, measuring working memory. Their performance was compared to that of 11 ovariectomized females (mean age = 3.7 years) treated with Silastic capsules filled with 17-β estradiol (E2, n = 6) or empty capsules (n = 5), previously tested on the same tasks (Lacreuse et al. in J Neuroendocrinol 26:296-309, 2014. doi: 10.1111/jne.12147). Behavioral observations were conducted daily. Females exhibited more locomotor behaviors than males. Males and females did not differ in the number of trials taken to reach criterion on the reversals, but males had significantly longer response latencies, regardless of hormone replacement. They also had a greater number of refusals than females. Additionally, both control and T-treated males, but not females, had slower responses on incorrect trials, suggesting that males were making errors due to distraction, lack of motivation or uncertainty. Furthermore, although both males and females had slower responding following an incorrect compared to a correct trial, the sex difference in response latencies was disproportionally large following an incorrect trial. No sex difference was found in the Delayed Response task. Overall, slower response latencies in males than females during Reversal Learning, especially during and following an incorrect trial, may reflect greater sensitivity to punishment (omission of reward) and greater performance monitoring in males, compared to females. Because these differences occurred in gonadectomized animals and regardless of hormone replacement, they may be organized early in life.

Primary stability in reversed-anatomy glenoid components.

PubMed

Hopkins, A R; Hansen, U N

2009-10-01

Reversed-anatomy shoulder replacement is advocated for patients with poor rotator cuff condition, for whom an anatomical reconstruction would provide little or no stability. Modern generations of this concept appear to be performing well in the short-term to midterm clinical follow-up. These designs are almost always non-cemented, requiring a high degree of primary stability to encourage bone on-growth and so to establish long-term fixation. Six different inverse-anatomy glenoid implants, currently on the market and encompassing a broad range of geometrical differences, were compared on the basis of their ability to impart primary stability through the minimization of interface micromotions. Fixing screws were only included in the supero-inferior direction in appropriate implants and were always inclined at the steepest available angle possible during surgery (up to a maximum of 30 degrees). The extent of predicted bony on-growth was, of course, highly dependent on the threshold for interface micromotion. In some instances an additional 30 per cent of the interface was predicted to promote bone on-growth when the threshold was raised from 20 microm to 50 microm. With maximum thresholds of micromotion for bone on-growth set to 30 microm, the Zimmer Anatomical device was found to be the most stable of the series of the six designs tested herein, achieving an additional 3 per cent (by surface area) of bone on-growth above the closest peer product (Biomet Verso). When this threshold was raised to 50 microm, the Biomet Verso design was most stable (3 per cent above the second-most stable design, the Zimmer Anatomical). Peak micromotions were not a good indicator of the predicted area of bone on-growth and could lead to some misinterpretation of the implant's overall performance. All but one of the implants tested herein provided primary stability sufficient to resist motions in excess of 150 microm at the interface.

Three-dimensional assessment of the normal Japanese glenoid and comparison with the normal French glenoid.

PubMed

Mizuno, N; Nonaka, S; Ozaki, R; Yoshida, M; Yoneda, M; Walch, G

2017-12-01

In 2014, reverse total shoulder arthroplasty was approved in Japan. We were concerned that the base plate might be incompatible with Japanese who were generally smaller than Westerners. Therefore, we investigated the dimensions and morphology of the normal Japanese glenoid and compared with the normal French glenoid. One hundred Japanese shoulders without glenoid lesions (50 men and 50 women) were investigated and compared with 100 French shoulders (50 men and 50 women). Computed tomography was performed with 3-dimensional image reconstruction and images were analyzed using Glenosys software. Glenoid parameters (width, height, retroversion and inclination) were compared between Japanese and French subjects. In Japanese subjects, the mean glenoid width was 25.5mm, height was 33.3mm, retroversion was 2.3° and inclination was 11.6° superiorly. In French subjects, the mean glenoid width was 26.7mm, height was 35.4mm, retroversion was 6.0° and inclination was 10.4° superiorly. Glenoid width and height were significantly smaller in Japanese subjects than French subjects (P=0.001 and P<0.001), while retroversion was significantly greater in French subjects (P<0.001). There was no significant difference of inclination. These findings will help surgeons to identify suitable patients for RSA and perform the procedure with appropriate preoperative planning. IV: retrospective or historical series. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Import Replacement: The Lloydminster, Alberta, Experience.

ERIC Educational Resources Information Center

Buchanan, Gary; Murray, Eloise

1995-01-01

The Canadian city of Lloydminster created an agency to promote import replacement by matching consumer needs of schools and other institutions with local suppliers via monthly newsletters, open houses, reverse trade shows, and a computerized database of regional businesses. Dollars retained in the community, new jobs, and development of local…

Ionic Dependence of Reversal Voltage of the Light Response in Limulus Ventral Photoreceptors

PubMed Central

Brown, J. E.; Mote, M. I.

1974-01-01

The light-induced current as measured using a voltage clamp (holding voltage at resting potential) is attenuated when sodium ions in the bathing solution, Nao, are replaced by Tris, choline, or Li or when NaCl is replaced by sucrose. After replacement of NaCl by sucrose, the reversal voltage, V rev, for the light response becomes more negative. In this case, the slope of the V rev vs. log Nao near Nao = 425 mM is approximately 55 mV/decade increase of Nao (mean for 13 cells). The slope decreases at lower values of Nao. Choline is not impermeant and partially substitutes for Na; the slope of V rev vs. log Nao is 20 mV/decade (mean for three cells). V rev does not change when Na is replaced by Li. Decreases in the bath concentrations of Ca, Mg, Cl, or K do not affect V rev. When Nao = 212 mM, V rev becomes more positive when Ko is increased. Thus, light induces a change in membrane permeability to Na and probably also to K. PMID:4817353

Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study.

PubMed

Mattei, Lorenza; Di Puccio, Francesca; Joyce, Thomas J; Ciulli, Enrico

2016-08-01

Although huge research efforts have been devoted to wear analysis of ultra-high molecular weight polyethylene (UHMWPE) in hip and knee implants, shoulder prostheses have been studied only marginally. Recently, the authors presented a numerical wear model of reverse total shoulder arthroplasties (RTSAs), and its application for estimating the wear coefficient k from experimental data according to different wear laws. In this study, such model and k expressions are exploited to investigate the sensitivity of UHMWPE wear to implant size and dimensional tolerance. A set of 10 different geometries was analysed, considering nominal diameters in the range 36-42mm, available on the market, and a cup dimensional tolerance of +0.2, -0.0mm (resulting in a diametrical clearance ranging between 0.04-0.24mm), estimated from measurements on RTSAs. Since the most reliable wear law and wear coefficient k for UHMWPE are still controversial in the literature, both the Archard law (AR) and the wear law of UHMWPE (PE), as well as four different k expressions were considered, carrying out a total of 40 simulations. Results showed that the wear volume increases with the implant size and decreases with the dimensional tolerance for both the wear laws. Interestingly, different trends were obtained for the maximum wear depth vs. clearance: the best performing implants should have a high conformity according to the AR law but low conformity for the PE law. However, according to both laws, wear is highly affected by both implant size and dimensional tolerance, although it is much more sensitive to the latter, with up to a twofold variation of wear predicted. Indeed, dimensional tolerance directly alters the clearance, and therefore the lubrication and contact pressure distribution in the implant. Rather surprisingly the role of dimensional tolerance has been completely disregarded in the literature, as well as in the standards. Furthermore, this study notes some important issues for future work, such as the validation of wear laws and predictive wear models and the sensitivity of k to implant geometry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Contact mechanics of reverse total shoulder arthroplasty during abduction: the effect of neck-shaft angle, humeral cup depth, and glenosphere diameter.

PubMed

Langohr, G Daniel G; Willing, Ryan; Medley, John B; Athwal, George S; Johnson, James A

2016-04-01

Implant design parameters can be changed during reverse shoulder arthroplasty (RSA) to improve range of motion and stability; however, little is known regarding their impact on articular contact mechanics. The purpose of this finite element study was to investigate RSA contact mechanics during abduction for different neck-shaft angles, glenosphere sizes, and polyethylene cup depths. Finite element RSA models with varying neck-shaft angles (155°, 145°, 135°), sizes (38 mm, 42 mm), and cup depths (deep, normal, shallow) were loaded with 400 N at physiological abduction angles. The contact area and maximum contact stress were computed. The contact patch and the location of maximum contact stress were typically located inferomedially in the polyethylene cup. On average for all abduction angles investigated, reducing the neck-shaft angle reduced the contact area by 29% for 155° to 145° and by 59% for 155° to 135° and increased maximum contact stress by 71% for 155° to 145° and by 286% for 155° to 135°. Increasing the glenosphere size increased the contact area by 12% but only decreased maximum contact stress by 2%. Decreasing the cup depth reduced the contact area by 40% and increased maximum contact stress by 81%, whereas increasing the depth produced the opposite effect (+52% and -36%, respectively). The location of the contact patch and maximum contact stress in this study matches the area of damage seen frequently on clinical retrievals. This finding suggests that damage to the inferior cup due to notching may be potentiated by contact stresses. Increasing the glenosphere diameter improved the joint contact area and did not affect maximum contact stress. However, although reducing the neck-shaft angle and cup depth can improve range of motion, our study shows that this also has some negative effects on RSA contact mechanics, particularly when combined. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Vancomycin-induced thrombocytopenia in a 60-year-old man: a case report.

PubMed

Shah, Ravish A; Musthaq, Adnan; Khardori, Nancy

2009-06-26

Vancomycin, a glycopeptide antibiotic, is used to treat resistant gram-positive infections. There has been a 10- to 20-fold increase in its use over the past 25 years. Although ototoxicity and nephrotoxicity are well known side effects of vancomycin, it can also induce platelet reactive antibodies leading to life-threatening thrombocytopenia. Vancomycin is often clinically overlooked as a cause of thrombocytopenia, especially in a scenario of sepsis or when there is use of heparin. We report a proven case of vancomycin-induced thrombocytopenia and its reversal after discontinuation of vancomycin. A 60-year-old man with a history of hypertension, congestive heart failure and dyslipidemia was admitted for a right shoulder rotator cuff tear. He underwent right-shoulder arthroscopy and rotator cuff repair. About three weeks later, he developed pain, swelling and purulent drainage from his right shoulder. Arthroscopic irrigation and drainage was then performed. Intraoperative fluid revealed the presence of Methicillin susceptible Staphylococcus aureus, vancomycin-sensitive Enterococcus spp. and Serratia marcescens. The patient had no known allergies. After reviewing his antimicrobial susceptibility, he was started on vancomycin 1500 mgs intravenously every 12 hours (to treat both Staphylococcus aureus and Enterococcus spp) and ciprofloxacin 750 mgs by oral induction every 12 hours. The patient's condition improved following antibiotic treatment. He was discharged and allowed to go home on IV vancomycin and oral ciprofloxacin. The patient's platelet count on the day of starting vancomycin therapy was 253 x 10(3)/mm(3). At weeks one, two and three, the counts were 231 x 10(3)/mm(3), 272 x 10(3)/mm and 6 x 103/mm(3), respectively. The patient was admitted for further work-up of the thrombocytopenia. He was later shown to have vancomycin-induced platelet-reactive antibodies, causing significant thrombocytopenia, and then reversal after his vancomycin medication was discontinued. Thrombocytopenia is a potentially life-threatening condition. Vancomycin is often clinically overlooked as a cause of thrombocytopenia, especially in a scenario of sepsis or when there is use of heparin. Simple laboratory testing with drug-dependent antibodies can be helpful in identifying vancomycin as a cause of thrombocytopenia.

Post-treatment glenoid classification system for total shoulder arthroplasty.

PubMed

Churchill, R Sean

2012-04-01

Over the past 10 years, numerous advancements in glenoid preparation and resurfacing have occurred. Current glenoid classification systems are either focused solely on the patient's preoperative glenoid bone configuration or on the available glenoid bone stock in revision arthroplasty cases. While these systems provide value in preoperative planning, they fail to properly classify the surgical reconstruction completed. A literature review of common bone preparation methods and sources of glenoid prosthetic failure was performed. Based upon this review, a classification system for grading the status of the glenoid after prosthetic implantation was developed. A 6 category, post-treatment, glenoid classification system is proposed: type 0: no reaming; type I: glenoid reaming into but not through the subchondral bone; type II: glenoid reaming which perforates through <50% of the subchondral bone surface area; type III: glenoid reaming which perforates through >50% of the subchondral bone surface area; type IV: use of structural bone graft; and type V: use of a posterior augmented glenoid prosthesis. Types I-III are further subdivided into subtype A which have 100% bone support of the prosthesis, and subtype B which have a region of unsupported prosthesis. The classification system proposed addresses the surgical management of the glenoid during prosthetic replacement. This unique approach to classifying the glenoid following surgical intervention will allow direct follow-up comparison of similarly treated glenoid replacements. Future multicenter studies, possibly through joint registry databases, could then determine the long-term efficacy of the various glenoid preparation methods. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Laparoscopic cholecystectomy under spinal-epidural anesthesia vs. general anaesthesia: a prospective randomised study.

PubMed

Donmez, Turgut; Erdem, Vuslat Muslu; Uzman, Sinan; Yildirim, Dogan; Avaroglu, Huseyin; Ferahman, Sina; Sunamak, Oguzhan

2017-03-01

Laparoscopic cholecystectomy (LC) is usually performed under the general anesthesia (GA). Aim of the study is to investigate the availability, safety and side effects of combined spinal/epidural anesthesia (CSEA) and comparison it with GA for LC. Forty-nine patients who have a LC plan were included into the study. The patients were randomly divided into GA (n = 25) and CSEA (n = 24) groups. Intraoperative and postoperative adverse events, postoperative pain levels were compared between groups. Anesthesia procedures and surgeries for all patients were successfully completed. After the organization of pneumoperitoneum in CSEA group, 3 patients suffered from shoulder pain (12.5%) and 4 patients suffered from abdominal discomfort (16.6%). All these complaints were recovered with IV fentanyl administration. Only 1 patient developed hypotension which is recovered with fluid replacement and no need to use vasopressor treatment. Postoperative shoulder pain was significantly less observed in CSEA group (25% vs . 60%). Incidence of postoperative nausea and vomiting (PONV) was less observed in CSEA group but not statistically significant (4.2% vs . 20%). In the group of CSEA, 3 patients suffered from urinary retention (12.5%) and 2 patients suffered from spinal headache (8.3%). All postoperative pain parameters except 6th hour, were less observed in CSEA group, less VAS scores and less need to analgesic treatment in CSEA group comparing with GA group. CSEA can be used safely for laparoscopic cholecystectomies. Less postoperative surgical field pain, shoulder pain and PONV are the advantages of CSEA compared to GA.

Effects of pea chips on pig performance, carcass quality and composition, and palatability of pork.

PubMed

Newman, D J; Harris, E K; Lepper, A N; Berg, E P; Stein, H H

2011-10-01

Pea chips are produced as a by-product when field peas are processed to produce split peas for human consumption. The objective of this experiment was to test the hypothesis that inclusion of pea chips in diets fed to finishing pigs does not negatively influence pig growth performance, carcass composition, and the palatability of pork. A total of 24 barrows (initial BW: 58.0 ± 6.6 kg) were allotted to 1 of 4 treatments and fed early finishing diets for 35 d and late finishing diets for 35 d. A corn-soybean meal (SBM) control diet and 3 diets containing pea chips were formulated for each phase. Pea chips replaced 33.3, 66.6, or 100% of the SBM in the control diet. Pigs were housed individually, and all pigs were slaughtered at the conclusion of the experiment. Overall, there were no differences (P > 0.11) in final BW, ADFI, and G:F of pigs among treatments, but there was a quadratic response in ADG (P = 0.04), with the smallest value observed in pigs fed the control diet. Dressing percentage linearly decreased (P = 0.04) as pea chips replaced SBM in diets, but there were no differences (P > 0.20) among treatments in HCW, LM area, 10th-rib backfat, lean meat percentage, and marbling. Likewise, pH in loin and ham, drip loss, and purge loss were not influenced (P > 0.13) by treatment. However, there was a quadratic response (P = 0.08) in 24-h pH in the shoulder, with the smallest value present in pigs fed the diet, in which 66.6% of the SBM was replaced by pea chips. Subjective LM color and Japanese color score standard were reduced (quadratic, P = 0.03 and 0.05, respectively) and LM b* values and hue angle were increased (quadratic, P = 0.09 and 0.10, respectively) when pea chips replaced SBM in the diets. Ham L* (quadratic, P = 0.04), a* (linear, P = 0.02), b* (quadratic, P = 0.07), color saturation (linear, P = 0.02), and hue angle (quadratic, P = 0.05) were increased when pea chips replaced SBM. However, there were no differences (P > 0.16) in shoulder and fat color. Moreover, cook loss percentage, shear force, juiciness, and pork flavor of pork chops were not different (P > 0.10) among treatments, but tenderness of pork chops linearly decreased (P = 0.04) as SBM replaced pea chips. It is concluded that all the SBM in diets fed to growing-finishing pigs may be replaced by pea chips without negatively influencing growth performance or carcass composition. However, pigs fed pea chips will have pork chops and hams that are lighter, and chops may be less tender if pigs are fed pea chips rather than corn and SBM.

A Cost-Effectiveness Analysis of Reverse Total Shoulder Arthroplasty versus Hemiarthroplasty for the Management of Complex Proximal Humeral Fractures in the Elderly.

PubMed

Osterhoff, Georg; O'Hara, Nathan N; D'Cruz, Jennifer; Sprague, Sheila A; Bansback, Nick; Evaniew, Nathan; Slobogean, Gerard P

2017-03-01

There is ongoing debate regarding the optimal surgical treatment of complex proximal humeral fractures in elderly patients. To evaluate the cost-effectiveness of reverse total shoulder arthroplasty (RTSA) compared with hemiarthroplasty (HA) in the management of complex proximal humeral fractures, using a cost-utility analysis. On the basis of data from published literature, a cost-utility analysis was conducted using decision tree and Markov modeling. A single-payer perspective, with a willingness-to-pay (WTP) threshold of Can$50,000 (Canadian dollars), and a lifetime time horizon were used. The incremental cost-effectiveness ratio (ICER) was used as the study's primary outcome measure. In comparison with HA, the incremental cost per quality-adjusted life-year gained for RTSA was Can$13,679. One-way sensitivity analysis revealed the model to be sensitive to the RTSA implant cost and the RTSA procedural cost. The ICER of Can$13,679 is well below the WTP threshold of Can$50,000, and probabilistic sensitivity analysis demonstrated that 92.6% of model simulations favored RTSA. Our economic analysis found that RTSA for the treatment of complex proximal humeral fractures in the elderly is the preferred economic strategy when compared with HA. The ICER of RTSA is well below standard WTP thresholds, and its estimate of cost-effectiveness is similar to other highly successful orthopedic strategies such as total hip arthroplasty for the treatment of hip arthritis. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Inferior tilt fixation of the glenoid component in reverse total shoulder arthroplasty: A biomechanical study.

PubMed

Chae, S W; Lee, J; Han, S H; Kim, S-Y

2015-06-01

Glenoid component fixation with an inferior tilt has been suggested to decrease scapular notching, but this remains controversial. We aimed here to evaluate the effect of glenoid component inferior tilt in reverse total shoulder arthroplasty (RSA) on micromotion and loss of fixation of the glenoid component by biomechanical testing. Increased inferior reaming of the glenoid for inferiorly tilted implantation of the glenoid component will decrease glenoid bone stock and compromise the fixation of RSA. The micromotions of the glenoid components attached to 14 scapulae from fresh frozen cadavers were measured and compared between neutral and 10° inferior tilts in 0.7- and 1-body weight cyclic loading tests using digital-image analysis. The incidence of bone breakage or loss of fixation was assessed in the 1-body weight fatigue-loading test. Micromotion was higher with a 10° inferior tilt than with a neutral tilt during both the 0.7-body weight (36 ± 11 μm vs. 22 ± 5 μm; P = 0.028) and 1-body weight (44 ± 16 μm vs. 28 ± 9 μm; P = 0.045) cyclic loading. The incidence of bone breakage or loss of fixation was 17% and 60% with a neutral and 10° inferior tilt, respectively. Glenoid component inferior tilt fixation in RSA may reduce primary stability and increase mechanical failure of the glenoid component, thereby reducing longevity of the prosthesis. Accordingly, we recommend careful placement of the glenoid component when an inferior tilt is used. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

77 FR 7518 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... report that the top 3 inches of the aero/fire seals of the blocker doors on the thrust reverser torque... aero/fire seals of the blocker doors on the thrust reverser torque boxes on the engines, and replacing affected aero/fire seals with new, improved aero/fire seals. We are issuing this AD to prevent a fire in...

Reversible perspective and splitting in time.

PubMed

Hart, Helen Schoenhals

2012-01-01

The element of time--the experience of it and the defensive use of it--is explored in conjunction with the use of reversible perspective as a psychotic defense. Clinical material from a long analysis illustrates how a psychotic patient used the reversible perspective, with its static splitting, to abolish the experience of time. When he improved and the reversible perspective became less effective for him, he replaced it with a more dynamic splitting mechanism using time gaps. With further improvement, the patient began to experience the passage of time, and along with it the excruciating pain of separation, envy, and loss.

Spectrum of magnetic resonance imaging findings in clinical glenohumeral instability

PubMed Central

Jana, Manisha; Srivastava, Deep Narayan; Sharma, Raju; Gamanagatti, Shivanand; Nag, Hiralal; Mittal, Ravi; Upadhyay, Ashish Dutt

2011-01-01

The glenohumeral joint is the most commonly dislocated joint in the body, and anterior instability is the most common type of shoulder instability. Depending on the etiology and the age of the patient, there may be associated injuries, for example, to the anterior-inferior labro-ligamentous structures (in young individuals with traumatic instability) or to the bony components (commoner in the elderly), which are best visualized using MRI and MR arthrography. Anterior instability is associated with a Bankart lesion and its variants and abnormalities of the anterior band of the inferior glenohumeral ligament (IGHL), whereas posterior instability is associated with reverse Bankart and reverse Hill-Sachs lesions. Cases of multidirectional instability often have no labral pathology on imaging but show specific osseous changes including increased chondrolabral retroversion. This article reviews the relevant anatomy in brief and describes the MRI findings in each type, with the imaging features of the common abnormalities. PMID:21799591

Associations Among Hip and Shoulder Range of Motion and Shoulder Injury in Professional Baseball Players

PubMed Central

Scher, Steve; Anderson, Kyle; Weber, Nick; Bajorek, Jeff; Rand, Kevin; Bey, Michael J.

2010-01-01

Abstract Context: The overhead throwing motion is complex, and restrictions in range of motion (ROM) at the hip may place additional demands on the shoulder that lead to injury. However, the relationship between hip and shoulder ROM in athletes with and without a history of shoulder injury is unknown. Objective: To (1) determine if differences exist in hip and shoulder ROM between professional baseball players with a history of shoulder injury and those with no history of shoulder injury and (2) assess relationships between hip and shoulder ROM in these players. Design: Cross-sectional study. Patients or Other Participants: Fifty-seven professional baseball players. Main Outcome Measure(s): Outcome measures consisted of hip extension and internal rotation, shoulder internal and external rotation, glenohumeral internal-rotation deficit, and history of shoulder injury. Differences in shoulder and hip ROM were assessed with a 1-way analysis of variance. Associations between hip and shoulder ROM were assessed with linear regression. Results: Nonpitchers with a history of shoulder injury had more external rotation and less internal rotation of the shoulder than nonpitchers with no history of shoulder injury. Glenohumeral internal-rotation deficit was greater in both pitchers and nonpitchers with a history of shoulder injury. The relationship between dominant hip extension and shoulder external rotation was significant for pitchers with a history of shoulder injury and nonpitchers with a history of shoulder injury. Conclusions: Shoulder injury may be associated with specific measures of hip and shoulder ROM, and hip extension and shoulder external rotation may be related in baseball players with a history of shoulder injury. Additional research is necessary to understand the specific mechanisms of shoulder injury in the throwing athlete. PMID:20210623

Effect of dietary replacement of sunflower oil with linseed oil on intramuscular fatty acids of lamb meat.

PubMed

Jerónimo, Eliana; Alves, Susana P; Prates, José A M; Santos-Silva, José; Bessa, Rui J B

2009-11-01

The effect of stepwise replacement of dietary sunflower oil (SO) with linseed oil (LO) on carcass composition, meat colour and fatty acid (FA) composition of intramuscular lipids of lamb meat was investigated. Thirty-six lambs were fed one of four diets consisting of pellets of lucerne with oil (60g/kg): the diet varied in the composition of oil added and were: 100% SO; 66.6% SO plus 33.3% LO; 33.3% SO plus 66.6% LO and 100% LO. The experimental period was 7weeks. Live slaughter weight, hot carcass weight and intermuscular fat percentage of chump and shoulder increased linearly with replacement of SO by LO. Total FA content of longissimus dorsi muscle and polar and neutral lipids were not affected by the treatments. Replacement of SO with LO increased the content of 18:3n-3 and total n-3 long chain (⩾C(20)) PUFA (LC-PUFA) and decreased the 18:2n-6, total n-6 LC-PUFA and 18:2 cis-9, trans-11 in meat lipids. Maximum CLA concentration (42.9mg/100g fresh muscle) was observed with 100% of SO, decreasing linearly by SO with LO replacement. Maximum n-3 LC-PUFA was predicted to be 27mg/100g of fresh muscle at 78% of SO with LO replacement. Considering both CLA and n-3 LC-PUFA, the maximum levels were estimated to be reached at 52% of replacement of SO with LO. The utilization of blends of SO and LO is a good approach for obtaining lamb meat enriched with both CLA and n-3 LC-PUFA.

Patient and implant survival following joint replacement because of metastatic bone disease

PubMed Central

2013-01-01

Background Patients suffering from a pathological fracture or painful bony lesion because of metastatic bone disease often benefit from a total joint replacement. However, these are large operations in patients who are often weak. We examined the patient survival and complication rates after total joint replacement as the treatment for bone metastasis or hematological diseases of the extremities. Patients and methods 130 patients (mean age 64 (30–85) years, 76 females) received 140 joint replacements due to skeletal metastases (n = 114) or hematological disease (n = 16) during the period 2003–2008. 21 replaced joints were located in the upper extremities and 119 in the lower extremities. Clinical and survival data were extracted from patient files and various registers. Results The probability of patient survival was 51% (95% CI: 42–59) after 6 months, 39% (CI: 31–48) after 12 months, and 29% (CI: 21–37) after 24 months. The following surgical complications were seen (8 of which led to additional surgery): 2–5 hip dislocations (n = 8), deep infection (n = 3), peroneal palsy (n = 2), a shoulder prosthesis penetrating the skin (n = 1), and disassembly of an elbow prosthesis (n = 1). The probability of avoiding all kinds of surgery related to the implanted prosthesis was 94% (CI: 89–99) after 1 year and 92% (CI: 85–98) after 2 years. Conclusion Joint replacement operations because of metastatic bone disease do not appear to have given a poorer rate of patient survival than other types of surgical treatment, and the reoperation rate was low. PMID:23530874

Incidence and prognostic factors for postoperative frozen shoulder after shoulder surgery: a prospective cohort study.

PubMed

Koorevaar, Rinco C T; Van't Riet, Esther; Ipskamp, Marcel; Bulstra, Sjoerd K

2017-03-01

Frozen shoulder is a potential complication after shoulder surgery. It is a clinical condition that is often associated with marked disability and can have a profound effect on the patient's quality of life. The incidence, etiology, pathology and prognostic factors of postoperative frozen shoulder after shoulder surgery are not known. The purpose of this explorative study was to determine the incidence of postoperative frozen shoulder after various operative shoulder procedures. A second aim was to identify prognostic factors for postoperative frozen shoulder after shoulder surgery. 505 consecutive patients undergoing elective shoulder surgery were included in this prospective cohort study. Follow-up was 6 months after surgery. A prediction model was developed to identify prognostic factors for postoperative frozen shoulder after shoulder surgery using the TRIPOD guidelines. We nominated five potential predictors: gender, diabetes mellitus, type of physiotherapy, arthroscopic surgery and DASH score. Frozen shoulder was identified in 11% of the patients after shoulder surgery and was more common in females (15%) than in males (8%). Frozen shoulder was encountered after all types of operative procedures. A prediction model based on four variables (diabetes mellitus, specialized shoulder physiotherapy, arthroscopic surgery and DASH score) discriminated reasonably well with an AUC of 0.712. Postoperative frozen shoulder is a serious complication after shoulder surgery, with an incidence of 11%. Four prognostic factors were identified for postoperative frozen shoulder: diabetes mellitus, arthroscopic surgery, specialized shoulder physiotherapy and DASH score. The combination of these four variables provided a prediction rule for postoperative frozen shoulder with reasonable fit. Level II, prospective cohort study.

21 CFR 888.3680 - Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Shoulder joint glenoid (hemi-shoulder) metallic... Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis. (a) Identification. A shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis is a device that has a glenoid (socket) component...

21 CFR 888.3690 - Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Shoulder joint humeral (hemi-shoulder) metallic... Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis. (a) Identification. A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium...

21 CFR 888.3680 - Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Shoulder joint glenoid (hemi-shoulder) metallic... Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis. (a) Identification. A shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis is a device that has a glenoid (socket) component...

21 CFR 888.3690 - Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Shoulder joint humeral (hemi-shoulder) metallic... Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis. (a) Identification. A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium...

21 CFR 888.3680 - Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Shoulder joint glenoid (hemi-shoulder) metallic... Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis. (a) Identification. A shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis is a device that has a glenoid (socket) component...

21 CFR 888.3680 - Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Shoulder joint glenoid (hemi-shoulder) metallic... Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis. (a) Identification. A shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis is a device that has a glenoid (socket) component...

21 CFR 888.3690 - Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Shoulder joint humeral (hemi-shoulder) metallic... Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis. (a) Identification. A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium...

21 CFR 888.3680 - Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Shoulder joint glenoid (hemi-shoulder) metallic... Shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis. (a) Identification. A shoulder joint glenoid (hemi-shoulder) metallic cemented prosthesis is a device that has a glenoid (socket) component...

21 CFR 888.3690 - Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Shoulder joint humeral (hemi-shoulder) metallic... Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis. (a) Identification. A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium...

21 CFR 888.3690 - Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Shoulder joint humeral (hemi-shoulder) metallic... Shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis. (a) Identification. A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium...

Study of hydrogen bonding in ethanol-water binary solutions by Raman spectroscopy

NASA Astrophysics Data System (ADS)

Li, Fabing; Men, Zhiwei; Li, Shuo; Wang, Shenghan; Li, Zhanlong; Sun, Chenglin

2018-01-01

Raman spectra of ethanol-water binary solutions have been observed at room temperature and atmospheric pressure. We find that with increasing ethanol concentration, the symmetric and asymmetric Osbnd H stretching vibrational mode (3286 and 3434 cm- 1) of water are shifted to lower frequency and the weak shoulder peak at 3615 cm- 1 (free OH) disappears. These results indicate that ethanol strengthens hydrogen bonds in water. Simultaneously, our experiment shows that Raman shifts of ethanol reverses when the volume ratio of ethanol and the overall solution is 0.2, which demonstrates that ethanol-water structure undergoes a phase transition.

High-voltage R-F feedthrough bushing

DOEpatents

Grotz, G.F.

1982-09-03

Described is a multi-element, high voltage radio frequency bushing for transmitting rf energy to an antenna located in a vacuum container. The bushing includes a center conductor of complex geometrical shape, an outer coaxial shield conductor, and a thin-walled hollow truncated cone insulator disposed between central and outer conductors. The shape of the center conductor, which includes a reverse curvature portion formed of a radially inwardly directed shoulder and a convex portion, controls the uniformity of the axial surface gradient on the insulator cone. The outer shield has a first substantially cylindrical portion and a second radially inwardly extending truncated cone portion.

High voltage RF feedthrough bushing

DOEpatents

Grotz, Glenn F.

1984-01-01

Described is a multi-element, high voltage radio frequency bushing for trmitting RF energy to an antenna located in a vacuum container. The bushing includes a center conductor of complex geometrical shape, an outer coaxial shield conductor, and a thin-walled hollow truncated cone insulator disposed between central and outer conductors. The shape of the center conductor, which includes a reverse curvature portion formed of a radially inwardly directed shoulder and a convex portion, controls the uniformity of the axial surface gradient on the insulator cone. The outer shield has a first substantially cylindrical portion and a second radially inwardly extending truncated cone portion.

Early results of Latitude primary total elbow replacement with a minimum follow-up of 2 years.

PubMed

Mehta, Saurabh S; Watts, Adam C; Talwalkar, Sumedh C; Birch, Ann; Nuttall, David; Trail, Ian A

2017-10-01

The aim of this study was to present outcomes of primary Latitude total elbow replacement (TER) with a minimum follow-up of 2 years. A retrospective cohort study was undertaken with prospective outcome data collection for the latest outcome. Included were 63 consecutive primary Latitude TERs in 58 patients performed during a period of 5 years at a specialist orthopedic hospital. The mean age of the patients was 62 years (33-85 years). Five primary TERs (4 patients) were lost to follow-up. The primary diagnosis was rheumatoid arthritis in 49, osteoarthritis in 8, and trauma in 6 elbows. The mean flexion-extension arc was 75° preoperatively and 97° postoperatively. Mean postoperative Elbex pain score was 19/100, and function score was 37/100. Mean postoperative scores were 42/100 for the Quick Disabilities of the Arm, Shoulder, and Hand and 38/50 for the elbow-specific American Shoulder and Elbow Surgeons assessment. Four patients died of unrelated causes, and 8 of 63 underwent further surgical intervention, including explantation and conversion from unlinked to linked implant. On radiographic review of 41 surviving TERs, aseptic radiologic loosening was observed of the humeral component in 4 elbows and of the ulnar component in 9. Seven elbows had no radial component, and of the remaining 34 elbows, 16 (47%) had signs of loosening of the radial implant. Complications included 1 heterotopic ossification, 1 olecranon fracture, and 3 further procedures for ulnar nerve entrapment. The results indicate that the early outcome of Latitude TER is comparable to that of other prostheses. There is concern about early radiologic loosening of the radial component. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Kinematic and EMG Comparison of Gait in Normal and Microgravity

NASA Technical Reports Server (NTRS)

DeWitt, John K.; Edwards, W. Brent; Perusek, Gail P.; Lewandowski, Beth E.; Samorezov, Sergey

2009-01-01

Astronauts regularly perform treadmill locomotion as a part of their exercise prescription while onboard the International Space Station. Although locomotive exercise has been shown to be beneficial for bone, muscle, and cardiovascular health, astronauts return to Earth after long duration missions with net losses in all three areas [1]. These losses might be partially explained by fundamental differences in locomotive performance between normal gravity (NG) and microgravity (MG) environments. During locomotive exercise in MG, the subject must wear a waist and shoulder harness that is attached to elastomer bungees. The bungees are attached to the treadmill, and provide forces that are intended to replace gravity. However, unlike gravity, which provides a constant force upon all body parts, the bungees provide a spring force only to the harness. Therefore, subjects are subjected to two fundamental differences in MG: 1) forces returning the subject to the treadmill are not constant, and 2) forces are only applied to the axial skeleton at the waist and shoulders. The effectiveness of the exercise may also be affected by the magnitude of the gravity replacement load. Historically, astronauts have difficulty performing treadmill exercise with loads that approach body weight (BW) due to comfort and inherent stiffness in the bungee system. Although locomotion can be executed in MG, the unique requirements could result in performance differences as compared to NG. These differences may help to explain why long term training effects of treadmill exercise may differ from those found in NG. The purpose of this investigation was to compare locomotion in NG and MG to determine if kinematic or muscular activation pattern differences occur between gravitational environments.

Linking of total elbow prosthesis during surgery; a biomechanical analysis.

PubMed

De Vos, Maarten J; Wagener, Marc L; Hendriks, Jan C M; Eygendaal, Denise; Verdonschot, Nico

2013-09-01

Presently, 2 types of elbow prostheses are used: unlinked and linked. The Latitude total elbow prosthesis allows the surgeon to decide during the implantation whether the prosthesis is placed unlinked or linked, and whether the native radial head is retained, resected, or replaced. The purpose of this study is to assess and to compare the varus and valgus laxity of the unlinked and linked version of the latitude total elbow prosthesis with: (1) the native radial head preserved, (2) the native radial head excised, and (3) the native radial head replaced by a radial head component. Biomechanical testing was performed on 14 fresh-frozen upper limb specimens. Linking the prosthesis predominantly influences the valgus laxity of the elbow. Linking the Latitude total elbow prosthesis results in increased valgus stability. In the linked version of the total elbow prosthesis, the radial head only plays a small part in both valgus and varus stability. An unlinked situation is not advised in absence of a native radial head or in case of inability to replace the radial head. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Progressive glenoid bone loss caused by erosion in humeral head resurfacing.

PubMed

Werner, B S; Stehle, J; Abdelkawi, A; Plumhoff, P; Hudek, R; Gohlke, F

2017-12-01

Cementless surface replacement of the shoulder represents an alternative to conventional stemmed anatomic prostheses. Glenoid erosion is a well-known complication in hemiarthroplasty. However, there is limited data concerning radiographic evaluation and prognostic factors for this phenomenon. The aim of our study was to determine the development of glenoid erosion following shoulder resurfacing using a new measurement technique and detect potential prognostic factors. We performed a retrospective analysis on 38 shoulders undergoing humeral head resurfacing with a mean follow-up of 65.4 ± 43 months. Clinical and radiographic evaluation followed a standardized protocol including pre- and postoperative Constant score, active range of motion, and X‑rays in true anteroposterior view. Three independent observers performed measurements of glenoid erosion. We found good interobserver reliability for glenoid erosion measurements (intraclass correlation coefficient [ICC] 0.74-0.78). Progressive glenoid erosion was present in all cases, averaging 5.5 ± 3.9 mm at more than 5 years' follow-up. Male patients demonstrated increased glenoid bone loss within the first 5 years (p < 0.04). The mean Constant score improved to 55.4 ± 23.6 points at the latest follow-up. Younger age was correlated to increased functional outcome. Revision rate due to painful glenoid erosion was 37%. Glenoid erosion can be routinely expected in patients undergoing humeral head resurfacing. Painful glenoid erosion leads to deterioration in functional outcome and necessitates revision surgery in a high percentage of cases.

Imaging Algorithms for Evaluating Suspected Rotator Cuff Disease: Society of Radiologists in Ultrasound Consensus Conference Statement

PubMed Central

Jacobson, Jon A.; Benson, Carol B.; Bancroft, Laura W.; Bedi, Asheesh; McShane, John M.; Miller, Theodore T.; Parker, Laurence; Smith, Jay; Steinbach, Lynne S.; Teefey, Sharlene A.; Thiele, Ralf G.; Tuite, Michael J.; Wise, James N.; Yamaguchi, Ken

2013-01-01

The Society of Radiologists in Ultrasound convened a panel of specialists from a variety of medical disciplines to reach a consensus about the recommended imaging evaluation of painful shoulders with clinically suspected rotator cuff disease. The panel met in Chicago, Ill, on October 18 and 19, 2011, and created this consensus statement regarding the roles of radiography, ultrasonography (US), computed tomography (CT), CT arthrography, magnetic resonance (MR) imaging, and MR arthrography. The consensus panel consisted of two co-moderators, a facilitator, a statistician and health care economist, and 10 physicians who have specialty expertise in shoulder pain evaluation and/or treatment. Of the 13 physicians on the panel, nine were radiologists who were chosen to represent a broad range of skill sets in diagnostic imaging, different practice types (private and academic), and different geographical regions of the United States. Five of the radiologists routinely performed musculoskeletal US as part of their practice and four did not. There was also one representative from each of the following clinical specialties: rheumatology, physical medicine and rehabilitation, orthopedic surgery, and nonoperative sports medicine. The goal of this conference was to construct several algorithms with which to guide the imaging evaluation of suspected rotator cuff disease in patients with a native rotator cuff, patients with a repaired rotator cuff, and patients who have undergone shoulder replacement. The panel hopes that these recommendations will lead to greater uniformity in rotator cuff imaging and more cost-effective care for patients suspected of having rotator cuff abnormality. © RSNA, 2013 PMID:23401583

Laparoscopic cholecystectomy under spinal-epidural anesthesia vs. general anaesthesia: a prospective randomised study

PubMed Central

Erdem, Vuslat Muslu; Uzman, Sinan; Yildirim, Dogan; Avaroglu, Huseyin; Ferahman, Sina; Sunamak, Oguzhan

2017-01-01

Purpose Laparoscopic cholecystectomy (LC) is usually performed under the general anesthesia (GA). Aim of the study is to investigate the availability, safety and side effects of combined spinal/epidural anesthesia (CSEA) and comparison it with GA for LC. Methods Forty-nine patients who have a LC plan were included into the study. The patients were randomly divided into GA (n = 25) and CSEA (n = 24) groups. Intraoperative and postoperative adverse events, postoperative pain levels were compared between groups. Results Anesthesia procedures and surgeries for all patients were successfully completed. After the organization of pneumoperitoneum in CSEA group, 3 patients suffered from shoulder pain (12.5%) and 4 patients suffered from abdominal discomfort (16.6%). All these complaints were recovered with IV fentanyl administration. Only 1 patient developed hypotension which is recovered with fluid replacement and no need to use vasopressor treatment. Postoperative shoulder pain was significantly less observed in CSEA group (25% vs. 60%). Incidence of postoperative nausea and vomiting (PONV) was less observed in CSEA group but not statistically significant (4.2% vs. 20%). In the group of CSEA, 3 patients suffered from urinary retention (12.5%) and 2 patients suffered from spinal headache (8.3%). All postoperative pain parameters except 6th hour, were less observed in CSEA group, less VAS scores and less need to analgesic treatment in CSEA group comparing with GA group. Conclusion CSEA can be used safely for laparoscopic cholecystectomies. Less postoperative surgical field pain, shoulder pain and PONV are the advantages of CSEA compared to GA. PMID:28289667

Arthrographic and clinical findings in patients with hemiplegic shoulder pain.

PubMed

Lo, Sui-Foon; Chen, Shu-Ya; Lin, Hsiu-Chen; Jim, Yick-Fung; Meng, Nai-Hsin; Kao, Mu-Jung

2003-12-01

To identify the etiology of hemiplegic shoulder pain by arthrographic and clinical examinations and to determine the correlation between arthrographic measurements and clinical findings in patients with hemiplegic shoulder pain. Case series. Medical center of a 1582-bed teaching institution in Taiwan. Thirty-two consecutive patients with hemiplegic shoulder pain within a 1-year period after first stroke were recruited. Not applicable. Clinical examinations included Brunnstrom stage, muscle spasticity distribution, presence or absence of subluxation and shoulder-hand syndrome, and passive range of motion (PROM) of the shoulder joint. Arthrographic measurements included shoulder joint volume and capsular morphology. Most patients had onset of hemiplegic shoulder pain less than 2 months after stroke. Adhesive capsulitis was the main cause of shoulder pain, with 50% of patients having adhesive capsulitis, 44% having shoulder subluxation, 22% having rotator cuff tears, and 16% having shoulder-hand syndrome. Patients with adhesive capsulitis showed significant restriction of passive shoulder external rotation and abduction and a higher incidence of shoulder-hand syndrome (P=.017). Those with irregular capsular margins had significantly longer shoulder pain duration and more restricted passive shoulder flexion (P=.017) and abduction (P=.020). Patients with shoulder subluxation had significantly larger PROM (flexion, P=.007; external rotation, P<.001; abduction, P=.001; internal rotation, P=.027), lower muscle tone (P=.001), and lower Brunnstrom stages of the proximal upper extremity (P=.025) and of the distal upper extremity (P=.001). Muscle spasticity of the upper extremity was slightly negatively correlated with shoulder PROM. Shoulder joint volume was moderately positively correlated with shoulder PROM. After investigating the hemiplegic shoulder joint through clinical and arthrographic examinations, we found that the causes of hemiplegic shoulder pain are complicated. Adhesive capsulitis was the leading cause of shoulder pain, followed by shoulder subluxation. Greater PROM of the shoulder joint, associated with larger joint volume, decreased the occurrence of adhesive capsulitis. Proper physical therapy and cautious handling of stroke patients to preserve shoulder mobility and function during early rehabilitation are important for a good outcome.

76 FR 62649 - Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

.../fire seals of the blocker doors on the thrust reverser torque boxes on the engines, and replacing affected aero/fire seals with new, improved aero/fire seals. That second supplemental NPRM was prompted by a report that the top 3 inches of the aero/fire seals of the blocker doors on the thrust reverser...

Multimodal Pain Management Protocol Versus Patient Controlled Narcotic Analgesia for Postoperative Pain Control after Shoulder Arthroplasty.

PubMed

Nicholson, Thema; Maltenfort, Mitchell; Getz, Charles; Lazarus, Mark; Williams, Gerald; Namdari, Surena

2018-05-01

Our institution's traditional pain management strategy after shoulder arthroplasty has involved the utilization of postoperative patient-controlled narcotic analgesia. More recently, we have implemented a protocol (TLC) that utilizes a multimodal approach. The purpose of this study was to determine whether this change has improved pain control and decreased narcotic utilization. Patients undergoing primary total shoulder or reverse arthroplasty were retrospectively studied. All patients underwent interscalene brachial plexus blockade. "Traditional" patients were provided a patient-controlled analgesic pump postoperatively. TLC patients were given preoperative and postoperative multimodal, non-narcotic analgesic medications and breakthrough narcotics. Morphine equivalent units (MEU) consumed and Visual Analog Scale (VAS) scores for pain (0, 8, 16, and 24 hours) were considered. There were 108 patients in each group. Total postoperative narcotic consumption in the first 24 postoperative hours was 38.5 +/- 81.1 MEU in the "Traditional group" compared to 59.3 +/- 59.1 MEU in the TLC group ( P<0.001 ). Of patients in the TLC group, 88% utilized breakthrough narcotics. VAS pain was significantly higher in the "Traditional group" at 16 hours (4.1 +/- 2.9 vs 3.2 +/- 2.7, P=0.020 ) and 24 hours (4.8 +/- 2.7 vs 3.7 +/- 2.6, P=0.004 ). Those treated with the TLC protocol had greater narcotic utilization but better VAS pain scores at 24 hours after surgery. Both groups experienced rebound pain. While the TLC protocol led to an improved pain experience, further modification of the currently protocol may be necessary to reduce overall narcotic utilization.

Ice hockey shoulder pad design and the effect on head response during shoulder-to-head impacts.

PubMed

Richards, Darrin; Ivarsson, B Johan; Scher, Irving; Hoover, Ryan; Rodowicz, Kathleen; Cripton, Peter

2016-11-01

Ice hockey body checks involving direct shoulder-to-head contact frequently result in head injury. In the current study, we examined the effect of shoulder pad style on the likelihood of head injury from a shoulder-to-head check. Shoulder-to-head body checks were simulated by swinging a modified Hybrid-III anthropomorphic test device (ATD) with and without shoulder pads into a stationary Hybrid-III ATD at 21 km/h. Tests were conducted with three different styles of shoulder pads (traditional, integrated and tethered) and without shoulder pads for the purpose of control. Head response kinematics for the stationary ATD were measured. Compared to the case of no shoulder pads, the three different pad styles significantly (p < 0.05) reduced peak resultant linear head accelerations of the stationary ATD by 35-56%. The integrated shoulder pads reduced linear head accelerations by an additional 18-21% beyond the other two styles of shoulder pads. The data presented here suggest that shoulder pads can be designed to help protect the head of the struck player in a shoulder-to-head check.

[Nuclear magnetic resonance tomography diagnosis of changes in the glenoid process in patients with unstable shoulder joints].

PubMed

Jerosch, J; Castro, W H; Assheuer, J

1992-09-01

In 4 fresh specimens and in 14 healthy volunteers we studied normal anatomy of the glenoid labrum by MRI. In a total of 124 patients we examined the shoulder joints by MRI. 69 patients had any kind of subacromial pathology. 55 patients showed a glenohumeral instability. All MRI findings were compared with the surgical findings during arthroscopy and during open surgery. 44 patients showed a recurrent anterior instability, 7 patients showed a multidirectional instability, 2 patients showed a posterior instability, and 2 patients presented acute anterior dislocation. We found significant variability in the labral shape as well as significant variability of anterior capsular attachment. The pathologic changes of the glenoid labrum were classified in four different types. In 78% we found a concomitant Hill-Sachs lesion of various diameter. 5 patients suffered from an additional complete rotator cuff tear. Compared to the intraoperative findings MRI had a sensitivity of 95%, a specificity of 94%, an accuracy of 94%, a positive predictive value of 91%, and a negative predictive value of 96% in detecting labral pathology. Presenting a high diagnostic value for detecting Bankart lesions, MRI may replace other diagnostic modalities like CT-arthrography.

Allograft reconstruction after resection of malignant tumors of the scapula.

PubMed

Mnaymneh, Walid A; Temple, H Thomas; Malinin, Theodore I

2002-12-01

The oncologic and functional outcomes of six patients who had scapular allograft reconstruction after scapulectomy for malignant tumors were reviewed. Five patients had Stage IIB and one patient had Stage IB tumors. Total scapulectomy was done in five patients, and partial scapulectomy (glenoid and neck) was done in one patient. Frozen glycerolized scapular allografts were implanted and fixed with plates and screws. The scapular muscles were reattached to the allograft. Tendon reconstruction to replace the excised muscles was done in two patients. The patients were followed up for an average of 3.8 years (range, 2-6 years). Cosmesis, elbow, and hand function were good in all patients. There were no infections, nonunions, or shoulder dislocations. One patient fractured the body of the allograft after a fall. One patient had local recurrence and had scapulectomy 5 years postoperatively. Two patients died 3 and 5 years postoperatively with lung metastases but with functioning grafts. The mean functional result using the Musculoskeletal Tumor Society functional score was 82 (range, 77-87). In this series, scapular allograft reconstruction restored cosmesis, shoulder stability, and function. Preservation or reconstruction of rotator cuff muscles is recommended.

SEAL FOR HIGH SPEED CENTRIFUGE

DOEpatents

Skarstrom, C.W.

1957-12-17

A seal is described for a high speed centrifuge wherein the centrifugal force of rotation acts on the gasket to form a tight seal. The cylindrical rotating bowl of the centrifuge contains a closure member resting on a shoulder in the bowl wall having a lower surface containing bands of gasket material, parallel and adjacent to the cylinder wall. As the centrifuge speed increases, centrifugal force acts on the bands of gasket material forcing them in to a sealing contact against the cylinder wall. This arrangememt forms a simple and effective seal for high speed centrifuges, replacing more costly methods such as welding a closure in place.

View of STS-109 MS Grunsfeld during EVA 1

NASA Image and Video Library

2002-03-04

STS109-E-5448 (4 March 2002) --- Astronaut John M. Grunsfeld, payload commander, peers into the crew cabin of the Space Shuttle Columbia during the first STS-109 extravehicular activity (EVA-1) on March 4, 2002. Grunsfeld's helmet visor displays a mirrored image of the Earth's hemisphere. Astronauts Grunsfeld and Richard M. Linnehan replaced the starboard solar array on the Hubble Space Telescope (HST) on the first of five scheduled STS-109 space walks. The lower portion of the giant telescope can be seen over Grunsfeld's left shoulder. The image was recorded with a digital still camera by a crewmate on shuttle's aft flight deck.

Angled BIO-RSA (bony-increased offset-reverse shoulder arthroplasty): a solution for the management of glenoid bone loss and erosion.

PubMed

Boileau, Pascal; Morin-Salvo, Nicolas; Gauci, Marc-Olivier; Seeto, Brian L; Chalmers, Peter N; Holzer, Nicolas; Walch, Gilles

2017-12-01

Glenoid deficiency and erosion (excessive retroversion/inclination) must be corrected in reverse shoulder arthroplasty (RSA) to avoid prosthetic notching or instability and to maximize function, range of motion, and prosthesis longevity. This study reports the results of RSA with an angled, autologous glenoid graft harvested from the humerus (angled BIO-RSA). A trapezoidal bone graft, harvested from the humeral head and fixed with a long-post baseplate and screws, was used to compensate for residual glenoid bone loss/erosion. For simple to moderate (<25°) glenoid defects, standardized instrumentation combined with some eccentric reaming (<15°) was used to reconstruct the glenoid and obtain neutral implant alignment. For severe (>25°) and complex (multiplanar) glenoid bone defects, patient-specific grafts and guides were used after 3-dimensional planning. Patients were reviewed with minimum 2 years of follow-up. Mean follow-up was 36 months (range, 24-81 months). Preoperative and postoperative measurements of inclination and version were performed in the plane of the scapula on computed tomography images. The study included 54 patients (41 women, 13 men; mean 73 years old). Fifteen patients had combined vertical and horizontal glenoid bone deficiency. Among E2/E3 glenoids, inclination improved from 37° (range, 14° to 84°) to 10.2° (range -28° to 36°, P < .001). Among B2/C glenoids, retroversion improved from -21° (range, -49° to 0°) to -10.6° (-32° to 4°, P = .06). Complete radiographic incorporation of the graft occurred in 94% (51 of 54). Complications included infection in 1 and clinical aseptic baseplate loosening in 2. Mild notching occurred in 25% (13 of 51) of patients. Constant-Murley and Subjective Shoulder Value assessments increased from 31 to 68 and from 30% to 83%, respectively (P < .001). Angled BIO-RSA predictably corrects glenoid deficiency, including severe (>25°) multiplanar deformity. Graft incorporation is predictable. Advantages of using an autograftharvested in situ include bone stock augmentation, lateralization, low donor-site morbidity, low relative cost, and flexibility needed to simultaneously correct posterior and superior glenoid defects. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

An investigation of shoulder forces in active shoulder tackles in rugby union football.

PubMed

Usman, Juliana; McIntosh, Andrew S; Fréchède, Bertrand

2011-11-01

In rugby union football the tackle is the most frequently executed skill and one most associated with injury, including shoulder injury to the tackler. Despite the importance of the tackle, little is known about the magnitude of shoulder forces in the tackle and influencing factors. The objectives of the study were to measure the shoulder force in the tackle, as well as the effects of shoulder padding, skill level, side of body, player size, and experimental setting on shoulder force. Experiments were conducted in laboratory and field settings using a repeated measures design. Thirty-five participants were recruited to the laboratory and 98 to the field setting. All were male aged over 18 years with rugby experience. The maximum force applied to the shoulder in an active shoulder tackle was measured with a custom built forceplate incorporated into a 45 kg tackle bag. The overall average maximum shoulder force was 1660 N in the laboratory and 1997 N in the field. This difference was significant. The shoulder force for tackling without shoulder pads was 1684 N compared to 1635 N with shoulder pads. There was no difference between the shoulder forces on the dominant and non-dominant sides. Shoulder force reduced with tackle repetition. No relationship was observed between player skill level and size. A substantial force can be applied to the shoulder and to an opponent in the tackle. This force is within the shoulder's injury tolerance range and is unaffected by shoulder pads. Copyright © 2011 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Evaluation of a new baseplate in reverse total shoulder arthroplasty - comparison of biomechanical testing of stability with roentgenological follow up criteria.

PubMed

Irlenbusch, U; Kohut, G

2015-04-01

To minimize notching problem associated with reversed prostheses, inferior positioning of base plate is recommended. This reduces the risk of notching, but does not eliminate it completely. Both polyethylene/PE-induced osteolysis and implant-to-bone or implant-to-implant contact may still occur, contributing to the risk of screw-breakage and resulting long-term failure. Therefore, the stability and integration of a newly developed base plate without inferior screw and inversion of bearing materials was investigated. Biomechanical assessment of primary stability of the two types of glenoid baseplate (1- and 2-pegged) was carried out according to ASTM F-2028-02 (American Society for Testing and Materials). Patients with a follow-up period of at least 2 years were clinically (n=78) and for most of them radiologically (n=61) examined. The X-rays were evaluated for loosening and scapular notching. The mean values of micromotions after 100,000 cycles showed no relevant differences between the 2-peg and the 1-peg base plates (47 μm for the 2-peg design and 43 μm for the 1-peg design), i.e. both were below the borderline for secure Osseointegration of 150 μm. Radiologically, no signs of loosening or radiolucent lines/RLL were found for both base plates. The mean incidence of inferior scapular notching was 23.6% (42 mm glenoid sphere: 15.8%). Only grade 1 and grade 2 notching was observed. Additionally as result of absence of PE-induced osteolysis shape, size, borderline and location of notching differed from those observed with conventional reverse total shoulder arthroplasty bearing materials. In combination with modified inferior operating technique, the newly designed implant has the potential to reduce the incidence of scapular notching and to avoid both PE-induced osteolysis and metal-screw contact. The new design did not compromise stability of the base plate in any way during the investigation period, as demonstrated both by the data from the biomechanical investigation and also by the radiological follow-up. Level III, case-control study. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Mechanics and complications of reverse shoulder arthroplasty: morse taper failure analysis and prospective rectification

NASA Astrophysics Data System (ADS)

Hoskin, HLD; Furie, E.; Collins, W.; Ganey, TM; Schlatterer, DR

2017-05-01

Since Sir John Charnley began his monumental hip arthroplasty work in 1958, clinical researchers have been incrementally improving longevity and functionality of total joint systems, although implant failure occurs on occasion. The purpose of this study is to report the fracture of the humeral tray Morse taper of a reverse total shoulder system (RTSS), which to date has not been reported with metallurgic analysis for any RTSS. There was no reported antecedent fall, motor vehicle collision, or other traumatic event prior to implant fracture in this case. Analysis was performed on the retrieved failed implant by Scanning Electron Microscopy (SEM) and Electron Dispersion Spectroscopy (EDS) in an attempt to determine the failure method, as well as to offer improvements for future implants. At the time of revision surgery all explants were retained from the left shoulder of a 61-year old male who underwent a non-complicated RTSS 4 years prior. The explants, particularly the cracked humeral tray, were processed as required for SEM and EDS. Analysis was performed on the failure sites in order to determine the chemical composition of the different parts of the implant, discover the chemical composition of the filler metal used during the electron beam welding process, and to detect any foreign elements that could suggest corrosion or other evidence of failure etiology. Gross visual inspection of all explants revealed that implant failure was a result of dissociation of the taper from the humeral tray at the weld, leaving the Morse taper embedded in the humeral stem while the tray floated freely in the patient’s shoulder. SEM further confirmed the jagged edges noted grossly at the weld fracture site, both suggesting failure due to torsional forces. EDS detected elevated levels of carbon and oxygen at the fracture site on the taper only and not on the humeral tray. In order to determine the origin of the high levels of C and O, it was considered that in titanium alloys, C and O are used as stabilizers that help raise the temperature at which titanium can be cast. Since the presence of stabilizers reduces ductility and fatigue strength, all interstitial elements are removed after casting. Considering this, the presence of C and O suggests that not all of the interstitials were removed during the manufacturing process, resulting in decreased fatigue strength. Further destructive analytical testing would verify weld quality and failure mode. RTSSs are quite successful in select patients not amenable to traditional shoulder arthroplasty options. This case report highlights how an implant may function well for several years and then suddenly fail without warning. SEM and EDS analysis suggest that residual C and O in the taper lowered the metal implant’s integrity, leading to torsional cracking at the weld junction of the humeral tray and the taper. The elevated levels of C and O measured at fracture sites on both the tray and the taper suggest poor quality filler metal or failure to remove all interstitial elements after casting. In both cases, the results would be decreased fatigue strength and overall toughness, leading to mechanical failure. A manufacturer’s recall of all implants soon followed the reporting of this implant failure; subsequently, the metal materials were changed from Ti6Al4V to both titanium alloy and cobalt-chrome alloy (Co-Cr-Mo). Time will tell if the alterations were sufficient.

Short Vegetative Phase-Like MADS-Box Genes Inhibit Floral Meristem Identity in Barley1[W][OA

PubMed Central

Trevaskis, Ben; Tadege, Million; Hemming, Megan N.; Peacock, W. James; Dennis, Elizabeth S.; Sheldon, Candice

2007-01-01

Analysis of the functions of Short Vegetative Phase (SVP)-like MADS-box genes in barley (Hordeum vulgare) indicated a role in determining meristem identity. Three SVP-like genes are expressed in vegetative tissues of barley: Barley MADS1 (BM1), BM10, and Vegetative to Reproductive Transition gene 2. These genes are induced by cold but are repressed during floral development. Ectopic expression of BM1 inhibited spike development and caused floral reversion in barley, with florets at the base of the spike replaced by tillers. Head emergence was delayed in plants that ectopically express BM1, primarily by delayed development after the floral transition, but expression levels of the barley VRN1 gene (HvVRN1) were not affected. Ectopic expression of BM10 inhibited spike development and caused partial floral reversion, where florets at the base of the spike were replaced by inflorescence-like structures, but did not affect heading date. Floral reversion occurred more frequently when BM1 and BM10 ectopic expression lines were grown in short-day conditions. BM1 and BM10 also inhibited floral development and caused floral reversion when expressed in Arabidopsis (Arabidopsis thaliana). We conclude that SVP-like genes function to suppress floral meristem identity in winter cereals. PMID:17114273

Shoulder pain and concomitant hand oedema among stroke patients with pronounced arm paresis

PubMed Central

2013-01-01

Background The aim of this prospective study was to identify clinical factors associated with the development of shoulder pain in stroke patients with pronounced arm paresis. Methods At stroke onset, 485 patients were initially assessed in 2007–2009. Sixty-three patients with pronounced arm paresis completed the study, and 21 of these developed shoulder pain. Clinical findings were recorded fortnightly by the attending physiotherapist during hospital stay. Results Hand oedema on the paretic side was more common in patients developing shoulder pain compared with those who did not develop shoulder pain. The onset of shoulder pain was associated with concomitant hand oedema. High NIHSS score was associated with developing shoulder pain. Patients with a history of shoulder pain developed pain earlier than those without previous shoulder pain. Patients with haemorrhagic stroke were significantly more prone to developing shoulder pain. Conclusions One-third of the stroke patients with pronounced arm paresis developed shoulder pain. Concomitant hand oedema seems to be an additional symptom of shoulder injury. Patients with low general status are more vulnerable to develop post-stroke shoulder pain. PMID:24765589

Revitalizing the Space Shuttle's Thermal Protection System with Reverse Engineering and 3D Vision Technology

NASA Technical Reports Server (NTRS)

Wilson, Brad; Galatzer, Yishai

2008-01-01

The Space Shuttle is protected by a Thermal Protection System (TPS) made of tens of thousands of individually shaped heat protection tile. With every flight, tiles are damaged on take-off and return to earth. After each mission, the heat tiles must be fixed or replaced depending on the level of damage. As part of the return to flight mission, the TPS requirements are more stringent, leading to a significant increase in heat tile replacements. The replacement operation requires scanning tile cavities, and in some cases the actual tiles. The 3D scan data is used to reverse engineer each tile into a precise CAD model, which in turn, is exported to a CAM system for the manufacture of the heat protection tile. Scanning is performed while other activities are going on in the shuttle processing facility. Many technicians work simultaneously on the space shuttle structure, which results in structural movements and vibrations. This paper will cover a portable, ultra-fast data acquisition approach used to scan surfaces in this unstable environment.

Arthroscopic treatment options for irreparable rotator cuff tears of the shoulder

PubMed Central

Anley, Cameron M; Chan, Samuel KL; Snow, Martyn

2014-01-01

The management of patients with irreparable rotator cuff tears remains a challenge for orthopaedic surgeons with the final treatment option in many algorithms being either a reverse shoulder arthroplasty or a tendon transfer. The long term results of these procedures are however still widely debated, especially in younger patients. A variety of arthroscopic treatment options have been proposed for patients with an irreparable rotator cuff tear without the presence of arthritis of the glenohumeral joint. These include a simple debridement with or without a biceps tenotomy, partial rotator cuff repair with or without an interval slide, tuberplasty, graft interposition of the rotator cuff, suprascapular nerve ablation, superior capsule reconstruction and insertion of a biodegradable spacer (Inspace) to depress the humeral head. These options should be considered as part of the treatment algorithm in patients with an irreparable rotator cuff and could be used as either as an interim procedure, delaying the need for more invasive surgery in the physiologically young and active, or as potential definitive procedures in the medically unfit. The aim of this review is to highlight and summarise arthroscopic procedures and the results thereof currently utilised in the management of these challenging patients. PMID:25405083

Risk of subacromial shoulder disorder in airport baggage handlers: combining duration and intensity of musculoskeletal shoulder loads.

PubMed

Møller, Sanne Pagh; Brauer, Charlotte; Mikkelsen, Sigurd; Alkjær, Tine; Koblauch, Henrik; Pedersen, Ellen Bøtker; Simonsen, Erik B; Thygesen, Lau Caspar

2018-04-01

Musculoskeletal shoulder load among baggage handlers measured by combining duration and intensity based on biomechanical and epidemiological information may be a stronger predictor of subacromial shoulder disorders than baggage handler seniority. In 2012, a cohort of baggage handlers employed at Copenhagen Airport in 1990-2012, and a cohort of unskilled otherwise employed men answered a survey. Self-reported information on work tasks during employment in the airport in combination with work task specific biomechanically modelled forces in the shoulder joint was used to estimate shoulder load. Exposure measures were accumulated shoulder abduction moment, accumulated shoulder compression force, accumulated supraspinatus force and baggage handler seniority. The outcome was subacromial shoulder disorder registered in the Danish National Patient Register. When analyses were adjusted by all confounders except age, exposure variables showed close to significant associations with subacromial shoulder disorder. Results could not confirm our hypothesis that combined information on work task duration and shoulder load intensity was stronger associated with subacromial shoulder disorder than seniority. Practitioner Summary: In this study we sought to identify if the exposure to work-related musculoskeletal shoulder loading including duration and intensity among baggage handlers was associated with subacromial shoulder disorder. We found that there was an association but this was not stronger than that between baggage handler seniority and subacromial shoulder disorder.

Muscular imbalance and shoulder pain in volleyball attackers.

PubMed Central

Kugler, A; Krüger-Franke, M; Reininger, S; Trouillier, H H; Rosemeyer, B

1996-01-01

OBJECTIVE: In overhead sports such as volleyball, baseball, or tennis shoulder problems are very common. The aim of this study was to identify features which may correlate with shoulder problems in volleyball attackers. METHODS: 30 competitive volleyball attackers (mean age 25 years) were included in the study; 15 were suffering from shoulder pain and 15 had no history of shoulder pain. The results were compared with those of a control group of 15 recreational athletes without any overhead sports activities. RESULTS: Volleyball attackers have a different muscular and capsular pattern at the playing shoulder compared to the opposite shoulder. Their playing shoulder is depressed, the scapula lateralised, and the dorsal muscles and the posterior and inferior part of the shoulder capsule shortened. These differences were of more significance in volleyball attackers with shoulder pain than in volleyball players without shoulder pain. In contrast to recreational athletes without any overhead sports activity, there were no significant difference in the comparison of the two shoulders. The histories, clinical and sonographic findings did not reveal further typical features for volleyball attackers with shoulder pain. CONCLUSIONS: Muscular balance of the shoulder girdle is very important in this sport. It is therefore imperative to include adequate stretching and muscular training programme for the prevention, as well as for therapy, of shoulder pain in volleyball attackers. Images Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 PMID:8889124

Shoulder Strength and Physical Activity Predictors of Shoulder Pain in People With Paraplegia From Spinal Injury: Prospective Cohort Study

PubMed Central

Hatchett, Patricia; Eberly, Valerie J.; Lighthall Haubert, Lisa; Conners, Sandy; Requejo, Philip S.

2015-01-01

Background Shoulder joint pain is a frequent secondary complaint for people following spinal cord injury (SCI). Objective The purpose of this study was to determine predictors of shoulder joint pain in people with paraplegia. Methods/Design A 3-year longitudinal study was conducted. Participants were people with paraplegia who used a manual wheelchair for at least 50% of their mobility and were asymptomatic for shoulder pain at study entry. Participants were classified as having developed shoulder pain if they experienced an increase of ≥10 points on the Wheelchair User's Shoulder Pain Index in the 3-year follow-up period. Measurements of maximal isometric shoulder torques were collected at study entry (baseline), 18 months, and 3 years. Daily activity was measured using a wheelchair odometer, and self-reported daily transfer and raise frequency data were collected by telephone every 6 weeks. Results Two hundred twenty-three participants were enrolled in the study; 39.8% developed shoulder pain over the 3-year follow-up period. Demographic variables and higher activity levels were not associated with shoulder pain onset. Baseline maximal isometric torque (normalized by body weight) in all shoulder muscle groups was 10% to 15% lower in participants who developed shoulder pain compared with those who remained pain-free. Lower shoulder adduction torque was a significant predictor of shoulder pain development (log-likelihood test=11.38), but the model explained only 7.5% of shoulder pain onset and consequently is of limited clinical utility. Limitations Time since SCI varied widely among participants, and transfer and raise activity was measured by participant recall. Conclusions Participants who developed shoulder pain had decreased muscle strength, particularly in the shoulder adductors, and lower levels of physical activity prior to the onset of shoulder pain. Neither factor was a strong predictor of shoulder pain onset. PMID:25721123

Rotator cuff exercises

MedlinePlus

... activities, including your shoulder joint and your shoulder blade Observe your spine and posture as you stand ... band Isometric shoulder exercises Wall push-ups Shoulder blade (scapular) retraction - no tubing Shoulder blade (scapular) retraction - ...

Prevalence and identification of shoulder pathology in athletic and nonathletic wheelchair users with shoulder pain: A pilot study.

PubMed

Finley, Margaret A; Rodgers, Mary M

2004-05-01

Although many wheelchair users report shoulder pain, the prevalence of specific pathologies remains controversial. Rotator cuff impingement, glenohumeral instability, and biceps tendonitis have been stated as the most commonly found pathology. This study investigated the prevalence and identity of shoulder pathology in athletic and nonathletic manual wheelchair users (MWCUs). Fifty-two MWCUs (26 athletes, 26 nonathletes) completed a survey regarding the nature of their injury, sports involvement, history, and presence of current and/or past shoulder pathology. Subjects currently experiencing shoulder pain underwent a clinical examination of both shoulders. Analysis of variance (p

Frozen shoulder and the Big Five personality traits.

PubMed

Debeer, Philippe; Franssens, Fien; Roosen, Isabelle; Dankaerts, Wim; Claes, Laurence

2014-02-01

In the past, several studies have suggested the existence of a "periarthritic personality" in patients with frozen shoulder. We conducted a study to determine differences in personality traits in patients with primary and secondary frozen shoulders. We prospectively evaluated 118 patients (84 women and 34 men; mean age, 53.8 years; SD 7.56) with a frozen shoulder. Of these patients, 48 had an idiopathic frozen shoulder and 70 had a secondary frozen shoulder. Personality traits were determined by the NEO Five-Factor Inventory (NEO-FFI) scale. This questionnaire measures the 5 major personality traits and is based on the norms determined in a neutral test situation for 2415 controls. Compared with healthy controls, no differences in personality traits were found in patients with primary and secondary frozen shoulder, except for Conscientiousness and Extraversion, for which patients with secondary frozen shoulder scored significantly higher than healthy controls. Patients with primary frozen shoulder scored significantly higher on Openness to Experience than did patients with secondary frozen shoulder; on the other 4 Big Five personality traits, no significant differences were found between patients with primary and secondary frozen shoulder. More specifically, patients with idiopathic frozen shoulder did not score higher on the trait Neuroticism as would be expected from previous publications. Our study results do not indicate that patients with an idiopathic frozen shoulder have a specific personality compared with healthy controls. Only a few differences were found in personality traits when the entire frozen shoulder group was compared with healthy controls and between patients with primary and secondary frozen shoulders. The results of this study suggest that these differences are not sufficient to speak about a specific "frozen shoulder personality." Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Multimodal assessment of sensorimotor shoulder function in patients with untreated anterior shoulder instability and asymptomatic handball players.

PubMed

Mornieux, Guillaume; Hirschmüller, Anja; Gollhofer, Albert; Südkamp, Norbert P; Maier, Dirk

2018-04-01

Functional evaluation of sensorimotor function of the shoulder joint is important for guidance of sports-specific training, prevention and rehabilitation of shoulder instability. Such assessment should be multimodal and comprise all qualities of sensorimotor shoulder function. This study evaluates feasibility of such multimodal assessment of glenohumeral sensorimotor function in patients with shoulder instability and handball players. Nine patients with untreated anterior instability of their dominant shoulder and 15 asymptomatic recreational handball players performed proprioceptive joint position sense and dynamic stabilization evaluations on an isokinetic device, as well as a functional throwing performance task. Outcome measures were analysed individually and equally weighted in a Shoulder-Specific Sensorimotor Index (S-SMI). Finally, isokinetic strength evaluations were conducted. We observed comparable sensorimotor functions of unstable dominant shoulders compared to healthy, contralateral shoulders (e.g. P=0.59 for S-SMI). Handball players demonstrated superior sensorimotor function of their dominant shoulders exhibiting a significantly higher throwing performance and S-SMI (P<0.001 and P=0.002, respectively), but comparable internal rotator peak torques for both shoulders (P>0.22). The present study proves feasibility of multimodal assessment of shoulder sensorimotor function in overhead athletes and patients with symptomatic anterior shoulder instability. Untreated shoulder instability led to a loss of dominance-related sensorimotor superiority indicating functional internal rotation deficiency. Dominant shoulders of handball players showed a superior overall sensorimotor function but weakness of dominant internal rotation constituting a risk factor for occurrence of posterior superior impingement syndrome. The S-SMI could serve as a diagnostic tool for guidance of sports-specific training, prevention and rehabilitation of shoulder instability.

Magnetic resonance imaging in glenohumeral instability

PubMed Central

Jana, Manisha; Gamanagatti, Shivanand

2011-01-01

The glenohumeral joint is the most commonly dislocated joint of the body and anterior instability is the most common type of shoulder instability. Magnetic resonance (MR) imaging, and more recently, MR arthrography, have become the essential investigation modalities of glenohumeral instability, especially for pre-procedure evaluation before arthroscopic surgery. Injuries associated with glenohumeral instability are variable, and can involve the bones, the labor-ligamentous components, or the rotator cuff. Anterior instability is associated with injuries of the anterior labrum and the anterior band of the inferior glenohumeral ligament, in the form of Bankart lesion and its variants; whereas posterior instability is associated with reverse Bankart and reverse Hill-Sachs lesion. Multidirectional instability often has no labral pathology on imaging but shows specific osseous changes such as increased chondrolabral retroversion. This article reviews the relevant anatomy in brief, the MR imaging technique and the arthrographic technique, and describes the MR findings in each type of instability as well as common imaging pitfalls. PMID:22007285

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

PubMed

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

Musculoskeletal morbidity: the growing burden of shoulder pain and disability and poor quality of life in diabetic outpatients.

PubMed

Laslett, L L; Burnet, S P; Jones, J A; Redmond, C L; McNeil, J D

2007-01-01

To investigate shoulder pain and disability and quality of life (QoL) over 12 months in patients with diabetes and in a non-diabetic control group. Cross-sectional study with 12-month follow-up in diabetic (n=189) and medical (n=99) outpatients employing the Shoulder Pain and Disability Index (SPADI) and SF-36 version 2. The results were analysed using restricted maximum likelihood (REML). The prevalence of current shoulder symptoms was 35% in diabetics and 17% in controls. Shoulder pain and disability as calculated by the SPADI were independently associated with diabetes (vs controls) and current shoulder symptoms, and worsened over 12 months. Disability scores worsened with age in diabetics, and pain scores were higher in diabetics than controls among patients reporting current shoulder symptoms. Poor physical QoL worsened over time in patients with diabetes and was worse in patients with current shoulder symptoms, whether they had diabetes or not. Mental QoL was worse only in patients with current shoulder symptoms. Shoulder symptoms are common, affecting 1 in every 3 diabetic patients and 1 in every 6 control patients. In this study shoulder pain, disability and physical QoL were poorer among diabetics and patients reporting current shoulder symptoms, and worsened over time. Mental QoL was worse in patients reporting current shoulder symptoms and was independent of diabetes. Therefore, shoulder symptoms are common, are associated with poor physical and mental QoL in addition to shoulder pain and disability, and are worse in patients with diabetes, even in a population with relatively moderate shoulder pain and disability.

Recurrent shoulder dystocia: is it predictable?

PubMed

Kleitman, Vered; Feldman, Roi; Walfisch, Asnat; Toledano, Ronen; Sheiner, Eyal

2016-11-01

To examine the course and outcome of deliveries occurring in women who previously experienced shoulder dystocia. In addition, recurrent shoulder dystocia risk factors were assessed. A retrospective cohort analysis comparing all singleton deliveries with and without shoulder dystocia in their preceding delivery was conducted. Independent predictors of recurrent shoulder dystocia were investigated using a multiple logistic regression model. Of the 201,422 deliveries included in the analysis, 307 occurred in women with a previous shoulder dystocia (0.015 %). Women with a history of shoulder dystocia were more likely to be older, experienced higher rates of gestational diabetes mellitus, polyhydramnios, prolonged second stage, operative delivery and macrosomia (>4000 g) in the following delivery. Previous shoulder dystocia was found to be an independent risk factor for recurrent shoulder dystocia (OR = 6.1, 95 % CI 3.2-11.8, p value <0.001) in the multivariable regression analysis. Shoulder dystocia is an independent risk factor for recurrent shoulder dystocia. Deliveries in women with a history of shoulder dystocia are characterized by higher rates of operative delivery, prolonged second stage of labor and macrosomia.

Shoulder CT scan

MedlinePlus

CAT scan - shoulder; Computed axial tomography scan - shoulder; Computed tomography scan - shoulder; CT scan - shoulder ... Risks of CT scans include: Being exposed to radiation Allergic reaction to contrast dye Birth defect if done during pregnancy CT scans ...

Clinical Evaluation of the TITAN™ Total Shoulder System

ClinicalTrials.gov

2018-02-14

Arthritis; Arthritis, Degenerative; Rheumatoid Arthritis; Post-traumatic Arthrosis of Other Joints, Shoulder Region; Rotator Cuff Syndrome of Shoulder and Allied Disorders; Fracture; Avascular Necrosis; Joint Instability; Joint Trauma; Dislocation, Shoulder; Pain, Shoulder

Relationship of shoulder activity and skin intrinsic fluorescence with low level shoulder pain and disability in people with type 2 diabetes.

PubMed

Sorensen, Christopher J; Hastings, Mary K; Lang, Catherine E; McGill, Janet B; Clark, B Ruth; Bohnert, Kathryn L; Mueller, Michael J

2017-06-01

People with type 2 diabetes (T2DM) have a high incidence of musculoskeletal disorders thought to be influenced by high non-enzymatic advanced glycated end-products (AGEs). The goals of this study were to determine differences in shoulder activity level and AGEs in people with T2DM compared to matched controls, and to determine factors associated with shoulder pain and disability. Eighty-one participants, T2DM (n=52) and controls (n=29), were examined for magnitude and duration of shoulder activity (measured using accelerometers), skin intrinsic florescence (SIF) as a surrogate measure of AGE level, and the Shoulder Pain and Disability Index (SPADI) as a self-report of shoulder pain and disability. Compared with controls, T2DM participants had 23% less shoulder activity (p=0.01), greater SIF level (3.6±1.7 vs 2.7±0.6AU, p=0.01), less shoulder strength (p<0.05), and the duration of their shoulder activity was moderately associated (r=0.40; p<0.01) with reported shoulder pain and disability. Shoulder pain and disability were not related to SIF level. Persons with T2DM have higher SIF levels and shoulder symptoms and disability indices than controls. Research is needed to determine if a shoulder mobility intervention to increase strength and mobility can help decrease shoulder pain and disability. Copyright © 2017 Elsevier Inc. All rights reserved.

Relationship of shoulder activity and skin intrinsic fluorescence with low level shoulder pain and disability in people with type 2 diabetes

PubMed Central

Sorensen, Christopher J.; Hastings, Mary K.; Lang, Catherine E.; McGill, Janet B.; Clark, B. Ruth; Bohnert, Kathryn L.; Mueller, Michael J.

2017-01-01

Aim People with type 2 diabetes (T2DM) have a high incidence of musculoskeletal disorders thought to be influenced by high non-enzymatic advanced glycated end-products (AGEs). The goals of this study were to determine differences in shoulder activity level and AGEs in people with T2DM compared to matched controls, and to determine factors associated with shoulder pain and disability. METHODS Eighty-one participants, T2DM (n=52) and controls (n=29), were examined for magnitude and duration of shoulder activity (measured using accelerometers), skin intrinsic florescence (SIF) as a surrogate measure of AGE level, and the Shoulder Pain and Disability Index (SPADI) as a self-report of shoulder pain and disability. RESULTS Compared with controls, T2DM participants had 23% less shoulder activity (p=0.01), greater SIF level (3.6 ± 1.7 vs 2.7 ± 0.6 AU, p=0.01), less shoulder strength (p<0.05), and the duration of their shoulder activity was moderately associated (r = 0.40; p<0.01) with reported shoulder pain and disability. Shoulder pain and disability were not related to SIF level. CONCLUSIONS Persons with T2DM have higher SIF levels and shoulder symptoms and disability indices than controls. Research is needed to determine if a shoulder mobility intervention to increase strength and mobility can help decrease shoulder pain and disability. PMID:28392042

Hypothyroidism-induced Reversible Encephalopathy as a Cause of Aggravation of Parkinsonism and Myoclonus in Parkinson's Disease.

PubMed

Ehm, Gwanhee; Kim, Han-Joon; Jeon, Beomseok

2017-01-01

Myoclonus and encephalopathy are unusual in patients with Parkinson's disease (PD). We describe the case of a 59-year-old male with PD who developed myoclonus and encephalopathy. Underlying hypothyroidism was revealed after admission and treated with levothyroxine. Myoclonus and encephalopathy were completely resolved following thyroid hormone replacement. Hypothyroidism can cause reversible myoclonus and encephalopathy along with unusual aggravation of parkinsonism symptoms in patients with PD.

Solid state switch

DOEpatents

Merritt, Bernard T.; Dreifuerst, Gary R.

1994-01-01

A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1500 A peak, 1.0 .mu.s pulsewidth, and 4500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry.

Maintaining Shoulder Health After Spinal Cord Injury: A Guide to Understanding Treatments for Shoulder Pain

PubMed Central

Van Straaten, Meegan G.; Cloud, Beth A.; Zhao, Kristin D.; Fortune, Emma; Morrow, Melissa M. B.

2017-01-01

Shoulder pain from overuse of the arm is common after spinal cord injury (SCI). This pain can be difficult to eliminate. There are many other complications after SCI; therefore, shoulder pain is sometimes not the first priority. However, if neglected for too long, shoulder pain could mean that more serious problems are happening inside the shoulder joint. Here we present the options available when treatment for shoulder pain is needed. PMID:28185640

Carcass characteristics of lambs fed spineless cactus as a replacement for sugarcane.

PubMed

de Oliveira, Juliana Paula Felipe; de Andrade Ferreira, Marcelo; Alves, Adryanne Marjorie Souza Vitor; de Melo, Ana Caroline Cerqueira; de Andrade, Ida Barbosa; Urbano, Stela Antas; Suassuna, Juraci Marcos Alves; de Barros, Leonardo José Assis; de Barros Melo, Tobias Tobit

2018-04-01

Fresh sugarcane has been a new roughage source for ruminant's in semiarid regions, a function of the decline of sugar and alcohol industry in recent years. However, there is little data published regarding lambs fed sugarcane associated with spineless cactus. This study evaluated the effect of sugarcane replacement with spineless cactus (0%, 33%, 66%, and 100%) in the diet of Santa Inês lambs on carcass characteristics. Thirty-six non-castrated Santa Ines lambs at four months of age and an initial body weight of 22±2.3 kg were assigned in a randomized block design and slaughtered after 70 days of confinement. The effects of spineless cactus as a replacement for sugarcane in the diet of the lambs on the carcass characteristics, commercial cut weight and yield, leg tissue composition, and carcass measurements were studied. The study revealed quadratic behavior in slaughter body weight, and hot and cold carcass weight, with maximum values of 38.60, 18.60, and 18.11 kg and replacement levels of 40.18%, 44.42%, and 43.14%, respectively. The cold carcass yield presented an increasing linear behavior. The compactness index of carcass and leg presented a quadratic effect, with estimated maximal values of 0.28 and 0.57 kg/cm and replacement levels of 43.37% and 45.5%, respectively. The weights of commercial cuts of leg, loin, shoulder, and breast showed quadratic behavior, with maximum values of 2.79, 0.852, 1.46, and 1.30 kg and replacement levels of 49.5, 45.32, 39.0, and 40.7, respectively. For tissue composition, quadratic behavior was verified for leg weight, subcutaneous fat, and total fat. The replacement of sugarcane by spineless cactus at level 44% is recommended for finishing lambs considering that this level improved most of the carcass characteristics, weights, and yields of commercial cuts and leg tissue composition.

Risk of surgery for subacromial impingement syndrome in relation to neck-shoulder complaints and occupational biomechanical exposures: a longitudinal study.

PubMed

Svendsen, Susanne Wulff; Dalbøge, Annett; Andersen, Johan Hviid; Thomsen, Jane Frølund; Frost, Poul

2013-11-01

The aim of this longitudinal study was to evaluate the risk of surgery for subacromial impingement syndrome (SIS) in relation to neck-shoulder complaints and occupational biomechanical shoulder exposures. The study was based on the Musculoskeletal Research Database at the Danish Ramazzini Centre. We linked baseline questionnaire information from 1993-2004 on neck-shoulder complaints, job titles, psychosocial work factors, body mass index, and smoking with register information on first-time surgery for SIS from 1996-2008. Biomechanical exposure measures were obtained from a job exposure matrix based on expert judgment. We applied multivariable Cox regression. During 280 125 person-years of follow-up among 37 402 persons, 557 first-time operations for SIS occurred. Crude surgery rates increased from 1.1 to 2.5 per 1000 person-years with increasing shoulder load. Using no neck-shoulder complaints and low shoulder load at baseline as a reference, no neck-shoulder complaints and high shoulder load showed an adjusted hazard ratio (HR(adj)) of 2.55 [95% confidence interval (95% CI) 1.59-4.09], while neck-shoulder complaints in combination with high shoulder load showed an HR(adj) of 4.52 (95% CI 2.87-7.13). Subanalyses based on 18 856 persons showed an HR(adj) of 5.40 (95% CI 2.88-10.11) for complaints located specifically in the shoulder in combination with high shoulder load. Based on these findings, persons with neck-shoulder and especially shoulder complaints in combination with high shoulder load seem an obvious target group for interventions aimed at reducing exposures to prevent surgery for SIS.

Effects of Messages Delivered by Mobile Phone on Increasing Compliance With Shoulder Exercises Among Patients With a Frozen Shoulder.

PubMed

Chen, Hui-Chun; Chuang, Tai-Yuan; Lin, Pi-Chu; Lin, Yen-Kuang; Chuang, Yeu-Hui

2017-07-01

The aim of this study was to examine the effects of reminders, encouragement, and educational messages delivered by mobile phone on shoulder exercise compliance and improvements in shoulder function among patients with a frozen shoulder. A randomized controlled trial design was used. A convenience sample of patients with a frozen shoulder in an orthopedic outpatient clinic was recruited. All participants were instructed on how to do shoulder exercises and were provided with a printed pamphlet about shoulder exercises. Then, the intervention group received reminders, encouragement, and educational messages by mobile phone daily for the next 2 weeks, while the comparison group did not. The intervention group had higher compliance with shoulder exercises than did the comparison group (t = 2.263, p = .03) and had significant improvements in shoulder forward flexion (F = 12.067, p = .001), external rotation (F = 13.61, p = .001), and internal rotation (F = 5.903, p = .018) compared to those in the comparison group after the 2-week intervention. The text messages significantly increased patient compliance with shoulder exercises and thus improved patients' shoulder range of motion. Hospital or clinics can send appropriate messages to patients via text message platforms in order to remind and encourage them to do shoulder exercises. © 2017 Sigma Theta Tau International.

Development of a Finite Element Model of the Human Shoulder to Investigate the Mechanical Responses and Injuries in Side Impact

NASA Astrophysics Data System (ADS)

Iwamoto, Masami; Miki, Kazuo; Yang, King H.

Previous studies in both fields of automotive safety and orthopedic surgery have hypothesized that immobilization of the shoulder caused by the shoulder injury could be related to multiple rib fractures, which are frequently life threatening. Therefore, for more effective occupant protection, it is important to understand the relationship between shoulder injury and multiple rib fractures in side impact. The purpose of this study is to develop a finite element model of the human shoulder in order to understand this relationship. The shoulder model included three bones (the humerus, scapula and clavicle) and major ligaments and muscles around the shoulder. The model also included approaches to represent bone fractures and joint dislocations. The relationships between shoulder injury and immobilization of the shoulder are discussed using model responses for lateral shoulder impact. It is also discussed how the injury can be related to multiple rib fractures.

A comparison of peak power in the shoulder press and shoulder throw.

PubMed

Dalziel, W M; Neal, R J; Watts, M C

2002-09-01

The ability to generate peak power is central for performance in many sports. Currently two distinct resistance training methods are used to develop peak power, the heavy weight/slow velocity and light weight/fast velocity regimes. When using the light weight/fast velocity power training method it was proposed that peak power would be greater in a shoulder throw exercise compared with a normal shoulder press. Nine males performed three lifts in the shoulder press and shoulder throw at 30% and 40% of their one repetition maximum (1RM). These lifts were performed identically, except for the release of the bar in the throw condition. A potentiometer attached to the bar measured displacement and duration of the lifts. The time of bar release in the shoulder throw was determined with a pressure switch. ANOVA was used to examine statistically significant differences where the level of acceptance was set at p < 0.05. Peak power was found to be significantly greater in the shoulder throw at 30% of 1 RM condition [F, (1, 23) = 2.325 p < 0.051 and at 40% of 1 RM [F, (1, 23) = 2.905 p < 0.05] compared to values recorded for the respective shoulder presses. Peak power was also greater in the 30% of 1 RM shoulder throw (510 +/- 103W) than in the 40% of 1 RM shoulder press (471 +/- 96W). Peak power was produced significantly later in the shoulder throw versus the shoulder press. This differing power reflected a greater bar velocity of the shoulder throw at both assigned weights compared with the shoulder press.

Shoulder injuries in elite rugby union football matches: Epidemiology and mechanisms.

PubMed

Usman, Juliana; McIntosh, Andrew S; Quarrie, Kenneth; Targett, Stephen

2015-09-01

Shoulder injuries in rugby union football have been the focus of few in-depth studies, despite their frequency and severity. The study's objective was to describe the incidence, patterns and mechanisms of shoulder injuries in rugby. Prospective cohort study of shoulder injury incidence and retrospective case-series study of shoulder injury mechanisms. Data were collected from Super Rugby matches from 2005 to 2010 involving elite level adult male rugby players. 7920 player participation hours and 100 shoulder injuries were recorded during 397 Super Rugby matches. The shoulder injury incidence rate was 13 per 1000 player hours (95% confidence interval 10-16). The mean number of days unavailable for selection due to these injuries was 37 (95% confidence interval 25-54). Tacklers sustained shoulder injuries at a higher rate than ball carriers (Rate Ratio=1.7 (95% confidence interval 0.5-5.3)). The most frequently reported injuries were those to the acromio-clavicular joint; dislocations resulted in the greatest amount of missed play. Using video analysis, 47 of the 100 shoulder injury events were successfully identified and analyzed. The main mechanisms of shoulder injury were contact with the ground with the shoulder/arm in horizontal adduction, flexion, and internal rotation; and impact to the lateral aspect of the shoulder with the elbow flexed and arm at the side. Direct impact to the shoulder, either through player-to-player contact or contact with the ground, is the main cause of shoulder injury. Methods to reduce injury risk, such as shoulder pads and tackle skills, require consideration. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Carcass characteristics and meat quality of lambs fed babassu cake (Orbignya speciosa) as a replacement for elephant grass silage.

PubMed

Luz, Janaina Barros; Alves, Kaliandra Souza; Mezzomo, Rafael; Ribeiro Dos Santos Neta, Ernestina; Gomes, Daiany Íris; Sampaio Oliveira, Luis Rennan; Silva, Josiane Costa; Ramos de Carvalho, Francisco Fernando

2017-01-01

The study aimed to evaluate the effect of the partial replacement of elephant grass silage with babassu cake (Orbignya speciosa) on the carcass characteristics and meat quality of feedlot lambs. Forty-five castrated male Santa Ines sheep (19.08 ± 0.41 kg) approximately 4 months old were distributed in a completely randomized design, with five treatments 0.0, 12.5, 25.0, 37.5 and 50 % (%DM) replacement of babassu cake with silage forming isoproteic diets formulated at a ratio of 40 % roughage to 60 % concentrate. All of the studied animals were slaughtered at the end of the experiment. The liver weights and yields increased with the inclusion of babassu cake. The weight of the shoulder increased from 2.31 to 2.61 kg, while the loin yield decreased from 7.38 to 6.64 % with the inclusion of babassu cake, both linearly. The body length, thoracic perimeter, rump perimeter and carcass compactness index showed high and positive correlations with the hot and cold carcass weights. The myofibrillar fragmentation index decreased linearly as a function of the inclusion level of babassu cake, but other quality variables were not affected. The replacement of up to 50 % of the elephant grass silage with babassu cake in the diet of lambs does not cause negative effects on carcass characteristics or meat quality.

Open arthrolysis and prosthetic replacement of the radial head for elbow stiffness associated with rotation limitation.

PubMed

Liu, Shen; Liu, Jun-jian; Li, Xu-jun; Ruan, Hong-jiang; Fan, Cun-yi

2013-02-01

Limited forearm rotation is a frequent combined disorder in elbow stiffness. If the radial head cannot be saved during open arthrolysis, prosthetic replacement might be considered because it enhances stability and allows early motion. In this study we retrospectively analyzed the outcome of 8 patients (7 men, 1 woman) who underwent open arthrolysis and simultaneous prosthetic replacement after resection of the radial head to restore elbow range of motion and forearm rotation. Patients were a mean age of 31.7 years (range, 22-40 years). Postoperatively, the mean (range) active range of motion improved from 29.4° (0°-70°) to 113.1° (80°-135°), mean (range) supination increased from 38.8° (0°-80°) to 77.5° (50°-90°), and mean (range) pronation improved from 18.8° (0°-80°) to 68.8° (50°-80°). The Mayo Elbow Performance Score improved from a mean (range) of 57.5 (50-70) to 92.5 (85-100) points. No elbow valgus instability was detected over a mean duration of 26 months of follow-up. The implant was considered stable in all patients. Open arthrolysis and prosthetic replacement of the radial head are effective in treating elbow stiffness with associated rotation limitation after resection of the radial head. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Clinical results of a surgical technique using endobuttons for complete tendon tear of pectoralis major muscle: report of five cases

PubMed Central

2011-01-01

Background We herein describe a surgical technique for the repair of complete tear of the pectoralis major (PM) tendon using endobuttons to strengthen initial fixation. Methods Five male patients (3 judo players, 1 martial arts player, and 1 body builder) were treated within 2 weeks of sustaining complete tear of the PM tendon. Average age at surgery and follow-up period were 28.4 years (range, 23-33) and 28.8 months (range, 24-36). A rectangular bone trough (about 1 × 4 cm) was created on the humerus at the insertion of the distal PM tendon. The tendon stump was introduced into this trough, and fixed to the reverse side of the humeral cortex using endobuttons and non-absorbable suture. Clinical assessment of re-tear was examined by MRI. Shoulder range of motion (ROM), outcome of treatment, and isometric power were measured at final follow-up. Results There were no clinical re-tears, and MRI findings also showed continuity of the PM tendon in all cases at final follow-up. Average ROM did not differ significantly between the affected and unaffected shoulders. The clinical outcomes at final follow-up were excellent (4/5 cases) or good (1/5). In addition, postoperative isometric power in horizontal flexion of the affected shoulder showed complete recovery when compared with the unaffected side. Conclusions Satisfactory outcomes could be obtained when surgery using the endobutton technique was performed within 2 weeks after complete tear of the PM tendon. Therefore, our new technique appears promising as a useful method to treat complete tear of the PM tendon. PMID:21955511

Muscular Activation During Plyometric Exercises in 90° of Glenohumeral Joint Abduction

PubMed Central

Ellenbecker, Todd S.; Sueyoshi, Tetsuro; Bailie, David S.

2015-01-01

Background: Plyometric exercises are frequently used to increase posterior rotator cuff and periscapular muscle strength and simulate demands and positional stresses in overhead athletes. The purpose of this study was to provide descriptive data on posterior rotator cuff and scapular muscle activation during upper extremity plyometric exercises in 90° of glenohumeral joint abduction. Hypothesis: Levels of muscular activity in the posterior rotator cuff and scapular stabilizers will be high during plyometric shoulder exercises similar to previously reported electromyographic (EMG) levels of shoulder rehabilitation exercises. Study Design: Descriptive laboratory study. Methods: Twenty healthy subjects were tested using surface EMG during the performance of 2 plyometric shoulder exercises: prone external rotation (PERP) and reverse catch external rotation (RCP) using a handheld medicine ball. Electrode application included the upper and lower trapezius (UT and LT, respectively), serratus anterior (SA), infraspinatus (IN), and the middle and posterior deltoid (MD and PD, respectively) muscles. A 10-second interval of repetitive plyometric exercise (PERP) and 3 repetitions of RCP were sampled. Peak and average normalized EMG data were generated. Results: Normalized peak and average IN activity ranged between 73% and 102% and between 28% and 52% during the plyometric exercises, respectively, with peak and average LT activity measured between 79% and 131% and between 31% and 61%. SA activity ranged between 76% and 86% for peak and between 35% and 37% for average activity. Muscular activity levels in the MD and PD ranged between 49% and 72% and between 12% and 33% for peak and average, respectively. Conclusion: Moderate to high levels of muscular activity were measured in the rotator cuff and scapular stabilizers during these plyometric exercises with the glenohumeral joint abducted 90°. PMID:25553216

Muscular activation during plyometric exercises in 90° of glenohumeral joint abduction.

PubMed

Ellenbecker, Todd S; Sueyoshi, Tetsuro; Bailie, David S

2015-01-01

Plyometric exercises are frequently used to increase posterior rotator cuff and periscapular muscle strength and simulate demands and positional stresses in overhead athletes. The purpose of this study was to provide descriptive data on posterior rotator cuff and scapular muscle activation during upper extremity plyometric exercises in 90° of glenohumeral joint abduction. Levels of muscular activity in the posterior rotator cuff and scapular stabilizers will be high during plyometric shoulder exercises similar to previously reported electromyographic (EMG) levels of shoulder rehabilitation exercises. Descriptive laboratory study. Twenty healthy subjects were tested using surface EMG during the performance of 2 plyometric shoulder exercises: prone external rotation (PERP) and reverse catch external rotation (RCP) using a handheld medicine ball. Electrode application included the upper and lower trapezius (UT and LT, respectively), serratus anterior (SA), infraspinatus (IN), and the middle and posterior deltoid (MD and PD, respectively) muscles. A 10-second interval of repetitive plyometric exercise (PERP) and 3 repetitions of RCP were sampled. Peak and average normalized EMG data were generated. Normalized peak and average IN activity ranged between 73% and 102% and between 28% and 52% during the plyometric exercises, respectively, with peak and average LT activity measured between 79% and 131% and between 31% and 61%. SA activity ranged between 76% and 86% for peak and between 35% and 37% for average activity. Muscular activity levels in the MD and PD ranged between 49% and 72% and between 12% and 33% for peak and average, respectively. Moderate to high levels of muscular activity were measured in the rotator cuff and scapular stabilizers during these plyometric exercises with the glenohumeral joint abducted 90°.

Point-of-care ultrasound facilitates diagnosing a posterior shoulder dislocation.

PubMed

Mackenzie, David C; Liebmann, Otto

2013-05-01

Posterior shoulder dislocation is an uncommon disruption of the glenohumeral joint. Risk factors include seizure, electric shock, and underlying instabilities of the shoulder joint. A 27-year-old man with a history of recurrent posterior shoulder dislocation presented to the Emergency Department with sudden shoulder pain and reduced range of motion about the shoulder after abducting and internally rotating his arm. Radiographs did not show fracture or dislocation. The treating physician suspected an occult posterior shoulder dislocation, but wanted to avoid performing a computed tomography scan of the shoulder, as the patient had undergone numerous scans during the evaluation of similar complaints. Instead, a point-of-care ultrasound was performed, demonstrating posterior displacement of the humeral head relative to the glenoid rim, confirming the presence of a posterior shoulder dislocation. The patient received procedural sedation, and the shoulder was reduced with real-time ultrasound visualization. The patient tolerated the procedure well, and had decreased pain and improved range of motion. He was discharged with a sling, swathe, and orthopedic follow-up. Point-of-care ultrasound of the shoulder may be used to demonstrate posterior shoulder dislocation. This may have particular utility in the setting of non-diagnostic radiographs. Copyright © 2013. Published by Elsevier Inc.

Constraining the dynamic response of subcontinental lithospheric mantle to rifting using Re-Os model ages in the Western Ross Sea, Antarctica

NASA Astrophysics Data System (ADS)

Doherty, C.; Class, C.; Goldstein, S. L.; Shirey, S. B.; Martin, A. P.; Cooper, A. F.; Berg, J. H.; Gamble, J. A.

2012-12-01

In order to understand the dynamic response of the subcontinental lithospheric mantle (SCLM) to rifting, it is important to be able to distinguish the geochemical signatures of SCLM vs. asthenosphere. Recent work demonstrates that unradiogenic Os isotope ratios can indicate old depletion events in the convecting upper mantle (e.g. Rudnick & Walker, 2009), and allow us to make these distinctions. Thus, if SCLM can be traced across a rifted margin, its fate during rifting can be established. The Western Ross Sea provides favorable conditions to test the dynamic response of SCLM to rifting. Re-Os measurements from 8 locations extending from the rift shoulder to 200 km into the rift basin reveal 187Os/188Os ranging from 0.1056 at Foster Crater on the shoulder, to 0.1265 on Ross Island within the rift. While individual sample model ages vary widely throughout the margin, 'aluminochron' ages (Reisberg & Lorand, 1995) reveal a narrower range of lithospheric stabilization ages. Franklin Island and Sulfur Cones show a range of Re-depletion ages (603-1522 Ma and 436-1497 Ma) but aluminochrons yield Paleoproterozoic stabilization ages of 1680 Ma and 1789 Ma, respectively. These ages coincide with U-Pb zircon ages from Transantarctic Mountain (TAM) crustal rocks, in support of SCLM stabilization at the time of crust formation along the central TAM. The Paleoproterozoic stabilization age recorded at Franklin Island is especially significant, since it lies 200km off of the rift shoulder. The similar ages beneath the rift shoulder and within the rift suggests stretched SCLM reaches into the rift and thus precludes replacement by asthenospheric mantle. The persistence of thinned Paleoproterozoic SCLM into the rifted zone in WARS suggests that it represents a 'type I' margin of Huismans and Beaumont (2011), which is characterized by crustal breakup before loss of lithospheric mantle. The Archean Re-depletion age of 3.2 Ga observed on the rift shoulder suggests that cratonic lithosphere extends beneath the TAM. With further analyses we hope to determine if there is lateral flow of cratonic lithosphere into the rift. Huismans, R., Beaumount, C., 2011. Depth-dependent extension, two stage breakup and cratonic underplating at rifted margins. Nature 473, 74-78. Reisberg, L.C., Lorand, J.P., 1995. Longevity of sub-continental mantle lithosphere from osmium isotope systematics in orogenic peridotite massifs. Nature 376, 159-162. Rudnick, R.L., Walker, R.J., 2009. Interpreting ages from Re-Os isotopes in peridotites. Lithos 1125, 1083-1095.

Shoulder pain -- a common problem in world-class badminton players.

PubMed

Fahlström, Martin; Yeap, Joo Seng; Alfredson, Håkan; Söderman, Kerstin

2006-06-01

Badminton is a sport that requires a lot of over-shoulder motion, with the shoulder in abduction/external rotation. This questionnaire study on 188 international top-level badminton players during the World Mixed Team Championships showed that previous or present shoulder pain on the dominant side was reported by 52% of the players. Previous shoulder pain was reported by 37% of the players and on-going shoulder pain by 20% of the players. There were no significant differences in the prevalence of shoulder pain between men and women. The majority of the shoulder pain had started gradually. The pain was usually associated with shoulder activity, and stiffness was a common, associated symptom. Furthermore, the shoulder pain was associated with consequences such as sleeping disturbances, changes in training and competition habits, and it also affected activities of daily living. The majority of the players had sought medical advice and had been given different kinds of treatment. The study showed that shoulder pain is a common and significant problem in world-class badminton players, and the consequences are most likely of importance for their training and playing capacity.

Incidence of Shoulder Injury in Elite Wheelchair Athletes Differ Between Sports: A Critically Appraised Topic.

PubMed

Fairbairn, Jessica R; Huxel Bliven, Kellie C

2018-02-06

Clinical Scenario: Until recently, injury epidemiology data on elite Paralympic athletes was limited. Current data suggests high rates of shoulder injury in wheelchair athletes. Differences in shoulder injury rates between sports have not been reported in this population. Is the incidence of shoulder injury in elite wheelchair athletes different between sports? Summary of Key Findings: Shoulder injury rates are high in elite wheelchair athletes, particularly in sports such as field events and fencing that require a stable base (eg, trunk, core control) from which to perform. Wheelchair racing requires repetitive motions that contribute to shoulder injuries, but rates are lower than field sports and fencing. Wheelchair curling and sledge hockey have low shoulder injury risk. Clinical Bottom Line: Shoulder injury rates vary based on sport in elite wheelchair athletes. In addition to incorporating shoulder complex specific rehabilitation for overuse shoulder injuries, clinicians should focus on core and trunk stabilization in elite wheelchair athletes competing in sports such as field events and fencing. Strength of Recommendation: Grade C evidence exists that reports shoulder injury rates among elite wheelchair athletes differ base upon sport participation.

Non-Carcinogenic Replacements for PBNA Antioxidant in PBXN-105 and PBXN- 106 Explosives

DTIC Science & Technology

1980-01-01

U~3 *y.4~;NWSY TR 801 NON-CARCINOGENIC REPLACEMENTS O ’ ~FOR PBNA ANTIOXIDANT IN PBXN -10.5 AND PBXN - 106 EXPLOSIVESo...... ............. JANUARY 1980... PBXN - 106 Explosive Plastic-Bonded Explosive % ABSSRACT (Continue on reverse olde It neceeeoey end Identify by block number) ’ Explosive mixes of PBXN -105...and PBXN - 106 were prepared using Cyanox 2246 and CAO-14 antioxidants in lieu of phenyl-beta-naphthylamine (PBNA). Specification tests, as well as

Effect of a worktable position on head and shoulder posture and shoulder muscles in manual material handling.

PubMed

Kim, Min-Hee; Yoo, Won-Gyu

2015-06-05

According to a recent research, manual working with high levels of static contraction, repetitive loads, or extreme working postures involving the neck and shoulder muscles causes an increased risk of neck and shoulder musculoskeletal disorders. We investigated the effects of the forwardly worktable position on head and shoulder angles and shoulder muscle activity in manual material handling tasks. The forward head and shoulder angles and the activity of upper trapezius, levator scapulae, and middle deltoid muscle activities of 15 workers were measured during performing of manual material handling in two tasks that required different forward head and shoulder angles. The second manual material task required a significantly increased forward head and shoulder angle. The upper trapezius and levator scapulae muscle activity in second manual material task was increased significantly compared with first manual material task. The middle deltoid muscle activity in second manual material task was not significantly different compared with first manual material task. Based on this result, the forward head and shoulder angles while performing manual work need to be considered in selection of the forward distance of a worktable form the body. The high level contractions of the neck and shoulder muscles correlated with neck and shoulder pain. Therefore, the forward distance of a worktable can be an important factor in preventing neck and shoulder pain in manual material handling workers.

Shoulder Injuries in US Astronauts Related to EVA Suit Design

NASA Technical Reports Server (NTRS)

Scheuring, Rick; McCulloch, Pat; Van Baalen, Mary; Watson, Richard; Bowen, Steve; Blatt, Terri

2012-01-01

There are multiple factors associated with the mechanism of injury that leads to shoulder injury requiring surgical repair. Despite the injury prevention measures taken from the 2003 Shoulder Tiger Team recommendations, shoulder injuries and subsequent shoulder surgeries remain relatively unchanged.

The effect of growth hormone replacement on the thyroid axis in patients with hypopituitarism: in vivo and ex vivo studies.

PubMed

Glynn, Nigel; Kenny, Helena; Quisenberry, Leah; Halsall, David J; Cook, Paul; Kyaw Tun, Tommy; McDermott, John H; Smith, Diarmuid; Thompson, Christopher J; O'Gorman, Donal J; Boelen, Anita; Lado-Abeal, Joaquin; Agha, Amar

2017-05-01

Alterations in the hypothalamic-pituitary-thyroid axis have been reported following growth hormone (GH) replacement. The aim was to examine the relationship between changes in serum concentration of thyroid hormones and deiodinase activity in subcutaneous adipose tissue, before and after GH replacement. A prospective, observational study of patients receiving GH replacement as part of routine clinical care. Twenty adult hypopituitary men. Serum TSH, thyroid hormones - free and total thyroxine (T4) and triiodothyronine (T3) and reverse T3, thyroglobulin and thyroid-binding globulin (TBG) levels were measured before and after GH substitution. Changes in serum hormone levels were compared to the activity of deiodinase isoenzymes (DIO1, DIO2 and DIO3) in subcutaneous adipose tissue. The mean daily dose of growth hormone (GH) was 0·34 ± 0·11 mg (range 0·15-0·5 mg). Following GH replacement, mean free T4 levels declined (-1·09 ± 1·99 pmol/l, P = 0·02). Reverse T3 levels also fell (-3·44 ± 1·42 ng/dl, P = 0·03) and free T3 levels increased significantly (+0·34 ± 0·15 pmol/l, P = 0·03). In subcutaneous fat, DIO2 enzyme activity declined; DIO1 and DIO3 activities remained unchanged following GH substitution. Serum TSH, thyroglobulin and TBG levels were unaltered by GH therapy. In vitro analysis of subcutaneous adipose tissue from hypopituitary human subjects demonstrates that GH replacement is associated with significant changes in deiodinase isoenzyme activity. However, the observed variation in enzyme activity does not explain the changes in the circulating concentration of thyroid hormones induced by GH replacement. It is possible that deiodinase isoenzymes are differentially regulated by GH in other tissues including liver and muscle. © 2016 John Wiley & Sons Ltd.

Shoulder internal rotation elbow flexion test for diagnosing cubital tunnel syndrome.

PubMed

Ochi, Kensuke; Horiuchi, Yukio; Tanabe, Aya; Waseda, Makoto; Kaneko, Yasuhito; Koyanagi, Takahiro

2012-06-01

Shoulder internal rotation enhances symptom provocation attributed to cubital tunnel syndrome. We present a modified elbow flexion test--the shoulder internal rotation elbow flexion test--for diagnosing cubital tunnel syndrome. Fifty-five ulnar nerves in cubital tunnel syndrome patients and 123 ulnar nerves in controls were examined with 5 seconds each of elbow flexion, shoulder internal rotation, and shoulder internal rotation elbow flexion tests before and after treatment (surgery in 18; conservative in others). For the shoulder internal rotation elbow flexion test position, 90° abduction, maximum internal rotation, and 10° flexion of the shoulder were combined with the elbow flexion test position. The test was considered positive if any symptom for cubital tunnel syndrome developed <5 seconds. Influence of the shoulder internal rotation elbow flexion test was evaluated by nerve conduction studies in 10 cubital tunnel syndrome nerves and 7 control nerves. The sensitivities/specificities of the 5-second elbow flexion, shoulder internal rotation, and shoulder internal rotation elbow flexion tests were 25%/100%, 58%/100%, and 87%/98%, respectively. Sensitivity differences between the shoulder internal rotation elbow flexion test and the other two tests were significant. Shoulder internal rotation elbow flexion test results and cubital tunnel syndrome symptoms were significantly correlated. Influence of the shoulder internal rotation elbow flexion test on the ulnar nerve was seen in 8 of 10 cubital tunnel syndrome nerves but not in controls. The 5-second shoulder internal rotation elbow flexion test is specific, easy and quick provocative test for diagnosing cubital tunnel syndrome. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Specific Shoulder Pathoanatomy in Semiprofessional Water Polo Players

PubMed Central

Klein, Maria; Tarantino, Ignazio; Warschkow, René; Berger, Claus Joachim; Zdravkovic, Vilijam; Jost, Bernhard; Badulescu, Michael

2014-01-01

Background: Shoulders of throwing and swimming athletes are highly stressed joints that often show structural abnormalities on magnetic resonance imaging (MRI). However, while water polo players exhibit a combination of throwing and swimming movements, a specific pattern of pathological findings has not been described. Purpose: To assess specific MRI abnormalities in shoulders of elite water polo players and to compare these findings with a healthy control group. Study Design: Cross-sectional study; Level of evidence, 3. Methods: After performing a power analysis, volunteers were recruited for this study. Both shoulders of 28 semiprofessional water polo players and 15 healthy volunteers were assessed clinically (based on the Constant score) and had bilateral shoulder MRIs. The shoulders were clustered into 3 groups: 28 throwing and 28 nonthrowing shoulders of water polo athletes and 30 shoulders of healthy control subjects. Results: Twenty-eight male water polo players with an average age of 24 years and 15 healthy subjects (30 shoulders) with an average age of 31 years were examined. Compared with controls, significantly more MRI abnormalities in the water polo players' throwing shoulders could be found in the subscapularis, infraspinatus, and posterior labrum (P = .001, P = .024, and P = .041, respectively). Other structures showed no statistical differences between the 3 groups, including the supraspinatus tendon, which had abnormalities in 36% of throwing versus 32% of nonthrowing shoulders and 33% of control shoulders. All throwing shoulders showed abnormal findings in the MRI, but only 8 (29%) were symptomatic. Conclusion: The shoulders of semiprofessional water polo players demonstrated abnormalities in subscapularis and infraspinatus tendons that were not typical abnormalities for swimmers or throwing athletes. Clinical Relevance: The throwing shoulders of water polo players have specific MRI changes. Clinical symptoms do not correlate with the MRI findings. PMID:26535326

Using the Microsoft Kinect™ to assess 3-D shoulder kinematics during computer use.

PubMed

Xu, Xu; Robertson, Michelle; Chen, Karen B; Lin, Jia-Hua; McGorry, Raymond W

2017-11-01

Shoulder joint kinematics has been used as a representative indicator to investigate musculoskeletal symptoms among computer users for office ergonomics studies. The traditional measurement of shoulder kinematics normally requires a laboratory-based motion tracking system which limits the field studies. In the current study, a portable, low cost, and marker-less Microsoft Kinect™ sensor was examined for its feasibility on shoulder kinematics measurement during computer tasks. Eleven healthy participants performed a standardized computer task, and their shoulder kinematics data were measured by a Kinect sensor and a motion tracking system concurrently. The results indicated that placing the Kinect sensor in front of the participants would yielded a more accurate shoulder kinematics measurements then placing the Kinect sensor 15° or 30° to one side. The results also showed that the Kinect sensor had a better estimate on shoulder flexion/extension, compared with shoulder adduction/abduction and shoulder axial rotation. The RMSE of front-placed Kinect sensor on shoulder flexion/extension was less than 10° for both the right and the left shoulder. The measurement error of the front-placed Kinect sensor on the shoulder adduction/abduction was approximately 10° to 15°, and the magnitude of error is proportional to the magnitude of that joint angle. After the calibration, the RMSE on shoulder adduction/abduction were less than 10° based on an independent dataset of 5 additional participants. For shoulder axial rotation, the RMSE of front-placed Kinect sensor ranged between approximately 15° to 30°. The results of the study suggest that the Kinect sensor can provide some insight on shoulder kinematics for improving office ergonomics. Copyright © 2017 Elsevier Ltd. All rights reserved.

Differential effects of raloxifene and estrogen on body composition in growth hormone-replaced hypopituitary women.

PubMed

Birzniece, Vita; Meinhardt, Udo J; Gibney, James; Johannsson, Gudmundur; Armstrong, Nicola; Baxter, Robert C; Ho, Ken K Y

2012-03-01

GH deficiency causes reduction in muscle and bone mass and an increase in fat mass (FM), the changes reversed by GH replacement. The beneficial effects of GH on fat oxidation and protein anabolism are attenuated more markedly by raloxifene, a selective estrogen receptor modulator, compared with 17β-estradiol. Whether this translates to a long-term detrimental effect on body composition is unknown. Our objective was to compare the effects of 17β-estradiol and raloxifene on FM, lean body mass (LBM), and bone mineral density (BMD) during GH replacement. This was an open-label randomized crossover study. Sixteen hypopituitary women received GH (0.5 mg/d) replacement for 24 months. One group received 17β-estradiol (2 mg/d) for the first 6 months before crossover to raloxifene (60 mg/d) for the remaining 18 months; the other received the reversed sequence. Serum IGF-I and IGF-binding protein-3 concentrations, and FM, LBM, lumbar spine and femoral neck BMD were analyzed at baseline and at 6, 12, and 24 months within and between subjects. GH therapy significantly increased mean IGF-I during 17β-estradiol and raloxifene cotreatments equally, but elevated IGF-binding protein-3 to a greater extent during raloxifene cotreatment. GH cotreatment with 17β-estradiol increased LBM and lumbar spine and femoral neck BMD and reduced FM to a greater extent than with raloxifene. In hypopituitary women, raloxifene at therapeutic doses significantly attenuated the beneficial effects of GH on body composition compared with 17β-estradiol. Raloxifene has no metabolic advantage over 17β-estradiol during GH replacement.

Acute starvation alters lipopolysaccharide-induced fever in leptin-dependent and -independent mechanisms in rats.

PubMed

Inoue, Wataru; Luheshi, Giamal N

2010-12-01

A decrease in leptin levels with the onset of starvation triggers a myriad of physiological responses including immunosuppression and hypometabolism/hypothermia, both of which can counteract the fever response to pathogens. Here we examined the role of leptin in LPS-induced fever in rats that were fasted for 48 h prior to inflammation with or without leptin replacement (12 μg/day). The preinflammation fasting alone caused a progressive hypothermia that was almost completely reversed by leptin replacement. The LPS (100 μg/kg)-induced elevation in core body temperature (T(core)) was attenuated in the fasted animals at 2-6 h after the injection, an effect that was not reversed by leptin replacement. Increasing the LPS dose to 1,000 μg/kg caused a long-lasting fever that remained unabated for up to 36 h after the injection in the fed rats. This sustained response was strongly attenuated in the fasted rats whose T(core) started to decrease by 18 h after the injection. Leptin replacement almost completely restored the prolonged fever. The attenuation of the prolonged fever in the fasted animals was accompanied by the diminution of proinflammatory PGE(2) in the cerebrospinal fluid and mRNA of proopiomelanocortin (POMC) in the hypothalamus. Leptin replacement prevented the fasting-induced reduction of POMC but not PGE(2). Moreover, the leptin-dependent fever maintenance correlated closely with hypothalamic POMC levels (r = 0.77, P < 0.001). These results suggest that reduced leptin levels during starvation attenuate the sustained fever response by lowering hypothalamic POMC tone but not PGE(2) synthesis.

Evaluation of safety effectiveness of composite shoulders, wide unpaved shoulders, and wide paved shoulders in Kansas.

DOT National Transportation Integrated Search

2013-03-01

Incremental increases in paved shoulder widths have been studied and are shown in the Highway Safety Manual. While : each incremental increase in shoulder width is beneficial, there is evidence that suggests the relationship between safety : improvem...

The angle of shoulder slope in normal males as a factor in shoulder-harness design.

DOT National Transportation Integrated Search

1965-03-01

In order to establish criteria for more comfortable shoulder-harness design, this study was conducted to determine the angle of slope of the top of the shoulders where poorly fitting shoulder harness may produce discomfort and, occasionally, function...

Solid state switch

DOEpatents

Merritt, B.T.; Dreifuerst, G.R.

1994-07-19

A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1,500 A peak, 1.0 [mu]s pulsewidth, and 4,500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry. 6 figs.

Shoulder joint impairment among Finns aged 30 years or over: prevalence, risk factors and co-morbidity.

PubMed

Mäkelä, M; Heliövaara, M; Sainio, P; Knekt, P; Impivaara, O; Aromaa, A

1999-07-01

To describe the prevalence, risk factors and consequences of shoulder joint impairment in the population. A representative sample (n = 7217) of the Finnish population aged > or = 30 yr participated in a health examination survey (the Mini-Finland Health Survey). The design of the survey allowed an independent assessment of disability, reported shoulder pain, shoulder joint impairment and major chronic co-morbidity. Shoulder impairment was observed in 8.8%, while pain was reported by 30%. The prevalence of shoulder pain decreased among the elderly, whereas impairments increased up to 20% of those aged 75-80 yr. In addition to age, sex, previous injury to the shoulder joint and a history of physically heavy work, diabetes was associated with shoulder impairment (OR 1.6, 95% CI 1.2-2.1). Shoulder impairment was associated with disability (adjusted OR 2.0, CI 1.6-2.5). Shoulder impairment is an important component of ill health among the elderly, and cannot be reduced to reported pain alone.

Shoulder pain after caesarean section: comparison between general and spinal anaesthesia.

PubMed

Zirak, N; Soltani, G; Hafizi, L; Mashayekhi, Z; Kashani, I

2012-05-01

This study investigated shoulder pain as a maternal complication after caesarean section (CS), evaluation of its prevalence and comparison between spinal anaesthesia (SA) and general anaesthesia (GA) groups. A total of 200 women as CS candidates were allocated into two equal groups; SA and GA. The total prevalence of shoulder pain was 39.45%. The two groups were matched according to demographic data. However, the incidence of shoulder pain in the GA group was more than that in the SA group (p =0.004). Shoulder pain in the right shoulder in the GA group was more prevalent than the left shoulder (p <0.001). Moderate severity of shoulder pain was significantly more in the GA group (p =0.000), while in the SA group, the mild severity was significant (p <0.001). Our study revealed that the incidence of shoulder pain after CS is significant. Moreover, shoulder pain was significantly more common in the GA group than the SA group.

Vascular endothelial growth factor 121 and 165 in the subacromial bursa are involved in shoulder joint contracture in type II diabetics with rotator cuff disease.

PubMed

Handa, Akiyoshi; Gotoh, Masafumi; Hamada, Kazutoshi; Yanagisawa, Kazuhiro; Yamazaki, Hitoshi; Nakamura, Masato; Ueyama, Yoshito; Mochida, Joji; Fukuda, Hiroaki

2003-11-01

Vascular endothelial growth factor (VEGF) is a glycoprotein that plays an important role in neovascularization and increases vascular permeability. We reported that VEGF is involved in motion pain of patients with rotator cuff disease by causing synovial proliferation in the subacromial bursa (SAB). The present study investigates whether VEGF is also involved in the development of shoulder contracture in diabetics with rotator cuff disease. We examined 67 patients with rotator cuff disease, including 36 with complete cuff tears, 20 with incomplete tears, and 11 without apparent tears (subacromial bursitis). The patients were into groups according to the presence or absence of diabetes (14 type II diabetics and 53 non-diabetics). Specimens of the synovium of the SAB were obtained from all patients during surgery. Expression of the VEGF gene in the synovium of the subacromial bursa was evaluated by using the reverse transcriptase polymerase chain reaction. The VEGF protein was localized by immunohistochemistry, and the number of vessels was evaluated based on CD34 immunoreactivity. The results showed that VEGF mRNA was expressed in significantly more diabetics (100%, 14/14) than in non-diabetics (70%, 37/53) (P=0.0159, Fisher's test). Investigation of VEGF isoform expression revealed VEGF121 in all 14 diabetics and in 37 of the 53 non-diabetics, VEGF165 in 12 of the 14 diabetics and in 21 of the 53 non-diabetics, and VEGF189 in 1 of the 14 diabetics and in 2 of the 53 non-diabetics. No VEGF206 was expressed in either group. VEGF protein was localized in both vascular endothelial cells and synovial lining cells. The mean number of VEGF-positive vessels and the vessel area were also significantly greater in the diabetics (p<0.015, Mann-Whitney U test). Synovial proliferation and shoulder joint contracture were more common in the diabetics (P=0.0329 and P=0.073, respectively; Fisher's test). The mean preoperative range of shoulder motion significantly differed in terms of elevation between two groups: 103.8 degrees in diabetics and 124.9 degrees in no diabetics (p=0.0039 Mann-Whitney U test). In contrast, external rotation did not significantly differ: 44 degrees in diabetics and 49 degrees in non-diabetics (p=0.4957, Mann-Whitney U test). These results suggest that VEGF121 and VEGF165 expression in the SAB is responsible for the development of shoulder joint contracture, especially in elevation, among type II diabetic patients with rotator cuff disease.

Investigation of a relationship between external force to shoulder and chest injury of WorldSID and THUMS in 32 km/h oblique pole side impact.

PubMed

Tanaka, Shinobu; Hayashi, Shigeki; Fukushima, Satoshi; Yasuki, Tsuyoshi

2013-01-01

This article describes the chest injury risk reduction effect of shoulder restraints using finite element (FE) models of the worldwide harmonized side impact dummy (WorldSID) and Total Human Model for Safety (THUMS) in an FE model 32 km/h oblique pole side impact. This research used an FE model of a mid-sized vehicle equipped with various combinations of curtain shield air bags, torso air bags, and shoulder restraint air bags. As occupant models, AM50 WorldSID and THUMS AM50 Version 4 were used for comparison. The research investigated the effect of shoulder restraint air bag on chest injury by comparing cases with and without a shoulder side air bag. The maximum external force to the chest was reduced by shoulder restraint air bag in both WorldSID and THUMS, reducing chest injury risk as measured by the amount of rib deflection, number of the rib fractures, and rib deflection ratio. However, it was also determined that the external force to shoulder should be limited to the chest injury threshold because the external shoulder force transmits to the chest via the arm in the case of WorldSID and via the scapula in the case of THUMS. Because these results show the shoulder restraint air bag effect on chest injury risk, the vent hole size of the shoulder restraint air bag was changed for varying reaction forces to investigate the relationship between the external force to the shoulder and the risk of chest injury. In the case of THUMS, an external shoulder force of 1.8 kN and more force from the shoulder restraint air bag was necessary to help prevent rib fracture. Increasing external force applied to shoulder up to 6.2 kN (the maximum force used in this study) did not induce any rib or clavicle fractures in the THUMS. When the shoulder restraint air bag generated external force to the shoulder from 1.8 to 6.2 kN in THUMS, which were applied to the WorldSID, the shoulder deflection ranged from 35 to 68 mm, and the shoulder force ranged from 1.8 to 2.3 kN. In the test configuration used, a shoulder restraint using the air bag helps reduce chest injury risk by lowering the maximum magnitude of external force to the shoulder and chest. To help reduce rib fracture risk in the THUMS, the shoulder restraint air bag was expected to generate a force of 3.7 kN with a minimum rib deflection ratio. This corresponds to a shoulder rib deflection of 60 mm and a shoulder load of 2.2 kN in WorldSID. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

BBilateral Neglected Anterior Shoulder Dislocation with Greater Tuberosity Fractures

PubMed Central

Upasani, Tejas; Bhatnagar, Abhinav; Mehta, Sonu

2016-01-01

Introduction: Shoulder dislocations are a very common entity in routine orthopaedic practice. Chronic unreduced anterior dislocations of the shoulder are not very common. Neurological and vascular complications may occur as a result of an acute anterior dislocation of the shoulder or after a while in chronic unreduced shoulder dislocation. Open reduction is indicated for most chronic shoulder dislocations. We report a case of neglected bilateral anterior shoulder dislocation with bilateral displaced greater tuberosity fracture. To the best of our knowledge, only a handful cases have been reported in literature with bilateral anterior shoulder dislocation with bilateral fractures. Delayed diagnosis/reporting is a scenario which makes the list even slimmer and management all the more challenging. Case Report: We report a case of a 35-year-old male who had bilateral anterior shoulder dislocation and bilateral greater tuberosity fracture post seizure and failed to report it for a period of 30 days. One side was managed conservatively with closed reduction and immobilization and the other side with open reduction. No neurovascular complications pre or post reduction of shoulder were seen. Conclusion: Shoulder dislocations should always be suspected post seizures and if found should be treated promptly. Treatment becomes difficult for any shoulder dislocation that goes untreated for considerable period of time PMID:27703939

Theory and experiment on charging and discharging a capacitor through a reverse-biased diode

NASA Astrophysics Data System (ADS)

Roy, Arijit; Mallick, Abhishek; Adhikari, Aparna; Guin, Priyanka; Chatterjee, Dibyendu

2018-06-01

The beauty of a diode lies in its voltage-dependent nonlinear resistance. The voltage on a charging and discharging capacitor through a reverse-biased diode is calculated from basic equations and is found to be in good agreement with experimental measurements. Instead of the exponential dependence of charging and discharging voltages with time for a resistor-capacitor circuit, a linear time dependence is found when the resistor is replaced by a reverse-biased diode. Thus, well controlled positive and negative ramp voltages are obtained from the charging and discharging diode-capacitor circuits. This experiment can readily be performed in an introductory physics and electronics laboratory.

Calcifying tendinitis of the shoulder: midterm results after arthroscopic treatment.

PubMed

Balke, Maurice; Bielefeld, Rebecca; Schmidt, Carolin; Dedy, Nicolas; Liem, Dennis

2012-03-01

Calcifying tendinitis is a common and painful disorder of the shoulder characterized by the presence of calcific deposits in the tendons of the rotator cuff. When nonoperative treatment over a prolonged period of time fails, surgical treatment should be considered. Midterm success rates are inconsistent, and the role of subacromial decompression is still unclear. Our hypotheses were that the rate of supraspinatus tears after arthroscopic treatment of calcifying tendinitis is comparable with that in the contralateral uninvolved shoulder and that subacromial decompression does not have beneficial effects compared with calcium removal alone. Case series; Level of evidence, 4. In 70 shoulders of 62 patients with a mean age of 54 years, arthroscopic removal of calcium deposits of the supraspinatus tendon was performed. In 44 shoulders, additional subacromial decompression was performed. After a mean follow-up of 6 years (range, 2-13 years), patients were clinically investigated, and function was statistically evaluated using Constant and American Shoulder and Elbow Surgeons (ASES) scores. Affected and contralateral shoulders were examined by ultrasound in 48 shoulders, and rotator cuff tears were documented. The mean Constant scores of the operated shoulders were significantly lower than those of the healthy shoulders (P < .001). The ASES scores significantly (P < .001) increased after surgery but were still lower than the ASES scores of the healthy shoulders (P < .001). Concerning the additional subacromial decompression, there were no significant differences in the overall ASES and Constant scores; the subitem "pain" was significantly better in the subacromial decompression group (P = .048). Ultrasound examination at last follow-up (48 shoulders) showed a partial supraspinatus tendon tear in 11 operated and 3 contralateral shoulders. Although the good clinical results after arthroscopic treatment of calcifying tendinitis of the shoulder persist midterm, the affected shoulders present significantly lower clinical scores than healthy shoulders. The rate of partial supraspinatus tendon tears seems to be higher after calcium removal. Additional subacromial decompression seems to reduce postoperative pain.

Evaluation of safety effectiveness of composite shoulders, wide unpaved shoulders, and wide paved shoulders in Kansas : [technical summary].

DOT National Transportation Integrated Search

2013-03-01

Incremental increases in paved shoulder widths have been studied and are shown in the Highway Safety Manual (HSM). While each incremental increase in shoulder width is beneficial, there is evidence that suggests the relationship between safety improv...

Reversible adrenal insufficiency and heterophile antibodies in a case of autoimmune polyendocrinopathy syndrome

PubMed Central

Kharb, Sandeep; Gundgurthi, Abhay; Dutta, Manoj K.; Garg, M. K.

2013-01-01

A 27-year-old male was admitted with diabetic ketoacidosis and altered sensorium with slurring of speech and ataxia. He was managed with intravenous insulin and fluids and later shifted to basal bolus insulin regimen and during further evaluation was diagnosed to be suffering from primary hypothyroidism and adrenal insufficiency. He was started on thyroxin replacement and steroids only during stress. After three months of follow up he was clinically euthyroid. His glycemic control was adequate on oral anti-hyperglycemic drugs and adrenal insufficiency recovered. However, his thyrotropin levels were persistently elevated on adequate replacement doses of thyroxin. His repeat TSH was estimated after precipitating serum with polyethylene glycol which revealed normal TSH. Here we report reversible adrenal insufficiency with hypothyroidism with falsely raised TSH because of presence of heterophile antibodies in a case of poly glandular endocrinopathy syndrome. PMID:24910843

Reversible adrenal insufficiency and heterophile antibodies in a case of autoimmune polyendocrinopathy syndrome.

PubMed

Kharb, Sandeep; Gundgurthi, Abhay; Dutta, Manoj K; Garg, M K

2013-12-01

A 27-year-old male was admitted with diabetic ketoacidosis and altered sensorium with slurring of speech and ataxia. He was managed with intravenous insulin and fluids and later shifted to basal bolus insulin regimen and during further evaluation was diagnosed to be suffering from primary hypothyroidism and adrenal insufficiency. He was started on thyroxin replacement and steroids only during stress. After three months of follow up he was clinically euthyroid. His glycemic control was adequate on oral anti-hyperglycemic drugs and adrenal insufficiency recovered. However, his thyrotropin levels were persistently elevated on adequate replacement doses of thyroxin. His repeat TSH was estimated after precipitating serum with polyethylene glycol which revealed normal TSH. Here we report reversible adrenal insufficiency with hypothyroidism with falsely raised TSH because of presence of heterophile antibodies in a case of poly glandular endocrinopathy syndrome.

49 CFR 572.194 - Shoulder.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Shoulder. 572.194 Section 572.194 Transportation..., Small Adult Female § 572.194 Shoulder. (a) The shoulder structure is part of the upper torso assembly shown in drawing 180-3000. For the shoulder impact test, the dummy is tested as a complete assembly...

49 CFR 572.184 - Shoulder assembly.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Shoulder assembly. 572.184 Section 572.184... Dummy, 50th Percentile Adult Male § 572.184 Shoulder assembly. (a) The shoulder (175-3000) is part of...) of this section, the shoulder assembly shall meet performance requirements of paragraph (c) of this...

49 CFR 572.184 - Shoulder assembly.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Shoulder assembly. 572.184 Section 572.184... Dummy, 50th Percentile Adult Male § 572.184 Shoulder assembly. (a) The shoulder (175-3000) is part of...) of this section, the shoulder assembly shall meet performance requirements of paragraph (c) of this...

21 CFR 888.3650 - Shoulder joint metal/polymer non-constrained cemented prosthesis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Shoulder joint metal/polymer non-constrained... Shoulder joint metal/polymer non-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits minimally (less than normal anatomic constraints) translation in one or...

49 CFR 572.194 - Shoulder.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Shoulder. 572.194 Section 572.194 Transportation..., Small Adult Female § 572.194 Shoulder. (a) The shoulder structure is part of the upper torso assembly shown in drawing 180-3000. For the shoulder impact test, the dummy is tested as a complete assembly...

49 CFR 572.184 - Shoulder assembly.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Shoulder assembly. 572.184 Section 572.184... Test Dummy, 50th Percentile Adult Male § 572.184 Shoulder assembly. (a) The shoulder (175-3000) is part... (b) of this section, the shoulder assembly shall meet performance requirements of paragraph (c) of...

49 CFR 572.194 - Shoulder.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Shoulder. 572.194 Section 572.194 Transportation..., Small Adult Female § 572.194 Shoulder. (a) The shoulder structure is part of the upper torso assembly shown in drawing 180-3000. For the shoulder impact test, the dummy is tested as a complete assembly...

49 CFR 572.184 - Shoulder assembly.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Shoulder assembly. 572.184 Section 572.184... Test Dummy, 50th Percentile Adult Male § 572.184 Shoulder assembly. (a) The shoulder (175-3000) is part... (b) of this section, the shoulder assembly shall meet performance requirements of paragraph (c) of...

21 CFR 888.3650 - Shoulder joint metal/polymer non-constrained cemented prosthesis.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Shoulder joint metal/polymer non-constrained... Shoulder joint metal/polymer non-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits minimally (less than normal anatomic constraints) translation in one or...

49 CFR 572.194 - Shoulder.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Shoulder. 572.194 Section 572.194 Transportation..., Small Adult Female § 572.194 Shoulder. (a) The shoulder structure is part of the upper torso assembly shown in drawing 180-3000. For the shoulder impact test, the dummy is tested as a complete assembly...

21 CFR 888.3650 - Shoulder joint metal/polymer non-constrained cemented prosthesis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Shoulder joint metal/polymer non-constrained... Shoulder joint metal/polymer non-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits minimally (less than normal anatomic constraints) translation in one or...

[The painful hemiplegic shoulder: effects of exercises program according to Bobath].

PubMed

Gialanella, B; Benvenuti, P; Santoro, R

2004-01-01

To verify whether a shoulder exercises program according to Bobath reduced the shoulder pain in hemiplegic patients. We studied a total of 20 patients with pain shoulder. Ten patients are assigned to group R (submitted to rehabilitation) and ten to group R+E (submitted to rehabilitation and shoulder exercises program according to Bobath). Shoulder exercises program was self-performed by the patients after training in occupational rehabilitation unit. The assessment of patients was performed at admission to hospital, at discharge and three months after discharge. Shoulder pain (VAS), shoulder range of motion, disability (FIM), motor function (Fugl-Meyer scale) and spasticity (Ashworth scale) of paretic arm were evaluated in all patients. VAS was similar in both groups at admission and decreased in group R+E at discharge without reaching significant differences (p=0.253). On the contrary, VAS and Shoulder range of motion improved statistically in group R+E (p=0.0001, p<0.04 respectively) after three months. The others variables measured did not change. This study showed that a shoulder exercises program according to Bobath reduces shoulder pain of patients with hemiplegia if it is performed daily and for a long period of time.

Risk factors for shoulder and elbow pain in youth baseball players.

PubMed

Matsuura, Tetsuya; Iwame, Toshiyuki; Suzue, Naoto; Arisawa, Kokichi; Sairyo, Koichi

2017-05-01

This study sought to quantify the 1-year cumulative incidence of shoulder and elbow pain among youth baseball players and identify risk factors associated with the occurrence of shoulder and elbow pain. In total, 900 youth baseball players (aged 7-11 years) were enrolled in a 1-year prospective follow-up study. One year later, the players were asked whether they had experienced episodes of shoulder or elbow pain and the following risk factors for such pain were investigated: age, position, length of baseball experience, training hours per week, and history of shoulder or elbow pain. Data for the groups with and without shoulder or elbow pain were analyzed using multivariate logistic regression models. Episodes of shoulder pain were reported by 18.3% of players and episodes of elbow pain were reported by 35.2% of players. Multivariate analysis showed that shoulder pain was associated with pitcher position, catcher position, longer training hours per week, and history of shoulder and elbow pain, and that elbow pain was associated with age, pitcher position, catcher position, longer training hours per week, and history of elbow pain. Length of baseball experience was not associated with shoulder or elbow pain. History of elbow pain, pitcher position, catcher position, and longer training hours per week were associated with both types of pain. History of shoulder pain was associated with shoulder pain but not elbow pain. Age was associated with elbow pain but not shoulder pain.

Dominant vs. non-dominant shoulder morphology in volleyball players and associations with shoulder pain and spike speed.

PubMed

Challoumas, Dimitrios; Artemiou, Andreas; Dimitrakakis, Georgios

2017-01-01

The aims of our study were to compare the dominant (DOM) and non-dominant (NDOM) shoulders of high-level volleyball athletes and identify possible associations of shoulder adaptations with spike speed (SS) and shoulder pathology. A total of 22 male volleyball players from two teams participating in the first division of the Cypriot championship underwent clinical shoulder tests and simple measurements around their shoulder girdle joints bilaterally. SS was measured with the use of a sports speed radar. Compared with the NDOM side, the DOM scapula was more lateralised, the DOM dorsal capsule demonstrated greater laxity, the DOM dorsal muscles stretching ability was compromised, and the DOM pectoralis muscle was more lengthened. Players with present or past DOM shoulder pain demonstrated greater laxity in their DOM dorsal capsule, tightening of their DOM inferior capsule, and lower SS compared with those without shoulder pain. Dorsal capsule measurements bilaterally were significant predictors of SS. None of the shoulder measurements was associated with team roles or infraspinatus atrophy, while scapular lateralisation was more pronounced with increasing years of experience, and scapular antetilting was greater with increasing age. Adaptations of the DOM shoulder may be linked to pathology and performance. We describe simple shoulder measurements that may have the potential to predict chronic shoulder injury and become part of injury prevention programmes. Detailed biomechanical and large prospective studies are warranted to assess the validity of our findings and reach more definitive conclusions.

Synthetic oligosaccharides can replace animal-sourced low-molecular weight heparins.

PubMed

Xu, Yongmei; Chandarajoti, Kasemsiri; Zhang, Xing; Pagadala, Vijayakanth; Dou, Wenfang; Hoppensteadt, Debra Moorman; Sparkenbaugh, Erica M; Cooley, Brian; Daily, Sharon; Key, Nigel S; Severynse-Stevens, Diana; Fareed, Jawed; Linhardt, Robert J; Pawlinski, Rafal; Liu, Jian

2017-09-06

Low-molecular weight heparin (LMWH) is used clinically to treat clotting disorders. As an animal-sourced product, LMWH is a highly heterogeneous mixture, and its anticoagulant activity is not fully reversible by protamine. Furthermore, the reliability of the LMWH supply chain is a concern for regulatory agencies. We demonstrate the synthesis of heparin dodecasaccharides (12-mers) at the gram scale. In vitro experiments demonstrate that the anticoagulant activity of the 12-mers could be reversed using protamine. One of these, labeled as 12-mer-1, reduced the size of blood clots in the mouse model of deep vein thrombosis and attenuated circulating procoagulant markers in the mouse model of sickle cell disease. An ex vivo experiment demonstrates that the anticoagulant activity of 12-mer-1 could be reversed by protamine. 12-mer-1 was also examined in a nonhuman primate model to determine its pharmacodynamic parameters. A 7-day toxicity study in a rat model showed no toxic effects. The data suggest that a synthetic homogeneous oligosaccharide can replace animal-sourced LMWHs. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Effects of two stretching methods on shoulder range of motion and muscle stiffness in baseball players with posterior shoulder tightness: a randomized controlled trial.

PubMed

Yamauchi, Taishi; Hasegawa, Satoshi; Nakamura, Masatoshi; Nishishita, Satoru; Yanase, Ko; Fujita, Kosuke; Umehara, Jun; Ji, Xiang; Ibuki, Satoko; Ichihashi, Noriaki

2016-09-01

The cross-body stretch and sleeper stretch are widely used for improving flexibility of the posterior shoulder. These stretching methods were modified by Wilk. However, few quantitative data are available on the new, modified stretching methods. A recent study reported the immediate effects of stretching and soft tissue mobilization on the shoulder range of motion (ROM) and muscle stiffness in subjects with posterior shoulder tightness. However, the long-term effect of stretching for muscle stiffness is unknown. The objective of this study was to examine the effects of 2 stretching methods, the modified cross-body stretch (MCS) and the modified sleeper stretch (MSS), on shoulder ROM and muscle stiffness in baseball players with posterior shoulder tightness. Twenty-four college baseball players with ROM limitations in shoulder internal rotation were randomly assigned to the MCS or MSS group. We measured shoulder internal rotation and horizontal adduction ROM and assessed posterior shoulder muscle stiffness with ultrasonic shear wave elastography before and after a 4-week intervention. Subjects were asked to perform 3 repetitions of the stretching exercises every day, for 30 seconds, with their dominant shoulder. In both groups, shoulder internal rotation and horizontal adduction ROM were significantly increased after the 4-week intervention. Muscle stiffness of the teres minor decreased in the MCS group, and that of the infraspinatus decreased in the MSS group. The MCS and MSS are effective for increasing shoulder internal rotation and horizontal adduction ROM and decreasing muscle stiffness of the infraspinatus or teres minor. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

A pragmatic regional interdependence approach to primary frozen shoulder: a retrospective case series.

PubMed

Wong, Christopher Kevin; Strang, Bryanna L; Schram, Galen A; Mercer, Elizabeth A; Kesting, Rebecca S; Deo, Kabi S

2018-05-01

Although the shoulder is known to move together with the scapula and other upper quarter joints, the current frozen shoulder clinical practice guidelines describe only physical therapy study treatments directed to the shoulder. None received a strong recommendation, highlighting the need for alternate interventions. This retrospective case series describes a pragmatic regional interdependence approach to frozen shoulder with impairment and functional outcomes, noting whether final ROM approached normal. Five consecutive patients referred with frozen shoulder diagnoses attended 11-21 sessions over 5-10 weeks with one physical therapist. Treatment addressed inter-related regions (shoulder, shoulder girdle, scapulothoracic/humerothoracic, and spine) following a pragmatic approach using impairment-based interventions (joint/soft tissue mobilization, muscle stretching/strengthening) as well as patient education, modalities and warm up that addressed individual presentations. All patients improved on all outcomes. Mean shoulder ROM at discharge, the impairment outcome, demonstrated large effect size increases: flexion (117 ± 10-179 ± 12, d  = 5.9), abduction (74 ± 8-175 ± 9, d  = 9.3), external rotation (23 ± 7-89 ± 2, d  = 12.0). The Disability of Arm Shoulder Hand functional outcome score upon follow up demonstrated a large effect size improvement ( d  = 1.5) from 40.0 ± 19.4-6.2 ± 3.7. Final ROM approached normal. This case series utilized a regional interdependence approach to frozen shoulder that included manual therapy interventions directed to consistent upper quarter body segments. Shoulder ROM was returned to near normal with functional improvements evident months after discharge. A pragmatic regional interdependence approach addressing multiple joints related to shoulder function may benefit other people with frozen shoulder. 4.

Incidence of and risk factors for traumatic anterior shoulder dislocation: an epidemiologic study in high-school rugby players.

PubMed

Kawasaki, Takayuki; Ota, Chihiro; Urayama, Shingo; Maki, Nobukazu; Nagayama, Masataka; Kaketa, Takefumi; Takazawa, Yuji; Kaneko, Kazuo

2014-11-01

The incidence of reinjuries due to glenohumeral instability and the major risk factors for primary anterior shoulder dislocation in youth rugby players have been unclear. The purpose of this study was to investigate the incidence, mechanisms, and intrinsic risk factors of shoulder dislocation in elite high-school rugby union teams during the 2012 season. A total of 378 male rugby players from 7 high-school teams were investigated by use of self-administered preseason and postseason questionnaires. The prevalence of a history of shoulder dislocation was 14.8%, and there were 21 events of primary shoulder dislocation of the 74 overall shoulder injuries that were sustained during the season (3.2 events per 1000 player-hours of match exposure). During the season, 54.3% of the shoulders with at least one episode of shoulder dislocation had reinjury. This study also indicated that the persistence of glenohumeral instability might affect the player's self-assessed condition, regardless of the incidence during the current season. By a multivariate logistic regression method, a history of shoulder dislocation on the opposite side before the season was found to be a risk factor for contralateral primary shoulder dislocation (odds ratio, 3.56; 95% confidence interval, 1.27-9.97; P = .02). High-school rugby players with a history of shoulder dislocation are not playing at full capacity and also have a significant rate of reinjury as well as a high risk of dislocating the other shoulder. These findings may be helpful in deciding on the proper treatment of primary anterior shoulder dislocation in young rugby players. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Echographic and kinetic changes in the shoulder joint after manual wheelchair propulsion under two different workload settings.

PubMed

Gil-Agudo, Ángel; Solís-Mozos, Marta; Crespo-Ruiz, Beatriz; Del-Ama Eng, Antonio J; Pérez-Rizo, Enrique; Segura-Fragoso, Antonio; Jiménez-Díaz, Fernando

2014-01-01

Manual wheelchair users with spinal cord injury (SCI) have a high prevalence of shoulder pain due to the use of the upper extremity for independent mobility, transfers, and other activities of daily living. Indeed, shoulder pain dramatically affects quality of life of these individuals. There is limited evidence obtained through radiographic techniques of a relationship between the forces acting on the shoulder during different propulsion conditions and shoulder pathologies. Today, ultrasound is widely accepted as a precise tool in diagnosis, displaying particularly effectiveness in screening the shoulder rotator cuff. Thus, we set out to perform an ultrasound-based study of the acute changes to the shoulder soft tissues after propelling a manual wheelchair in two workload settings. Shoulder joint kinetics was recorded from 14 manual wheelchair users with SCI while they performed high- and low-intensity wheelchair propulsion tests (constant and incremental). Shoulder joint forces and moments were obtained from inverse dynamic methods, and ultrasound screening of the shoulder was performed before and immediately after the test. Kinetic changes were more relevant after the most intensive task, showing the significance of high-intensity activity, yet no differences were found in ultrasound-related parameters before and after each propulsion task. It therefore appears that further studies will be needed to collect clinical data and correlate data regarding shoulder pain with both ultrasound images and data from shoulder kinetics.

Echographic and Kinetic Changes in the Shoulder Joint after Manual Wheelchair Propulsion Under Two Different Workload Settings

PubMed Central

Gil-Agudo, Ángel; Solís-Mozos, Marta; Crespo-Ruiz, Beatriz; del-Ama Eng, Antonio J.; Pérez-Rizo, Enrique; Segura-Fragoso, Antonio; Jiménez-Díaz, Fernando

2014-01-01

Manual wheelchair users with spinal cord injury (SCI) have a high prevalence of shoulder pain due to the use of the upper extremity for independent mobility, transfers, and other activities of daily living. Indeed, shoulder pain dramatically affects quality of life of these individuals. There is limited evidence obtained through radiographic techniques of a relationship between the forces acting on the shoulder during different propulsion conditions and shoulder pathologies. Today, ultrasound is widely accepted as a precise tool in diagnosis, displaying particularly effectiveness in screening the shoulder rotator cuff. Thus, we set out to perform an ultrasound-based study of the acute changes to the shoulder soft tissues after propelling a manual wheelchair in two workload settings. Shoulder joint kinetics was recorded from 14 manual wheelchair users with SCI while they performed high- and low-intensity wheelchair propulsion tests (constant and incremental). Shoulder joint forces and moments were obtained from inverse dynamic methods, and ultrasound screening of the shoulder was performed before and immediately after the test. Kinetic changes were more relevant after the most intensive task, showing the significance of high-intensity activity, yet no differences were found in ultrasound-related parameters before and after each propulsion task. It therefore appears that further studies will be needed to collect clinical data and correlate data regarding shoulder pain with both ultrasound images and data from shoulder kinetics. PMID:25566539

Physiotherapy treatment of the diabetic shoulder: a longitudinal study following patients with diabetes and shoulder pain using a pre-post treatment design.

PubMed

Kyhlbäck, Maria; Schröder Winter, Helena; Thierfelder, Tomas; Söderlund, Anne

2014-01-01

The aim of this study was to describe and evaluate a physiotherapy program targeted to reduce pain intensity and improve the daily functioning of diabetics with shoulder problems. It was hypothesized that patients receiving specific physiotherapy treatment improved more frequently and rapidly than diabetic patients followed up without specific physiotherapeutic intervention. A pre-post treatment design was completed for a group of 10 subjects. The treatment protocol, also applied during the daily activities of the subjects, was aiming at reducing pain intensity and shoulder stiffness and improving impaired functioning in daily activities by muscle relaxation, light-load exercise and enhancing proper shoulder co-ordination. The group analysis showed significant decrease of pain intensity level as well as improved shoulder functioning and sustained level of subject self-efficacy beliefs throughout the study period. The results suggest that it is possible to relieve shoulder pain intensity and improve daily activities of patients with diabetes-related shoulder problems by employing a physiotherapy program focusing on muscle relaxation, light-load exercise and on the enhancement of proper shoulder co-ordination in daily activities. A physiotherapy program can be effective in reducing pain and improving shoulder function in diabetics with shoulder problems. The treatment should focus on muscle relaxation, light-load exercise and on the enhancement of proper shoulder co-ordination in daily activities.

Short-term Clinical Results of Manipulation Under Ultrasound-Guided Brachial Plexus Block in Patients with Idiopathic Frozen Shoulder and Diabetic Secondary Frozen Shoulder.

PubMed

Ando, Akira; Hamada, Junichiro; Hagiwara, Yoshihiro; Sekiguchi, Takuya; Koide, Masashi; Itoi, Eiji

2018-01-01

This study examined the effectiveness of manipulation under ultrasound-guided brachial plexus block in patients with recalcitrant idiopathic frozen shoulder and diabetic secondary frozen shoulder (diabetic frozen shoulder). Forty-four idiopathic frozen shoulders and 10 diabetic frozen shoulders with failed conservative treatment for at least 3 months were included in this study. The manipulation was performed under ultrasound-guided brachial plexus block and visual analogue scale, range of motion, and Constant scores were measured before manipulation and at the last follow-up examination. No major complications were observed during the procedure. Sufficient improvement was not obtained in two patients during the procedure and to avoid complications, the procedure was discontinued and subsequently arthroscopic capsular release was performed. Visual analogue scale, range of motion towards all directions, and Constant scores were significantly improved after the manipulation in both the idiopathic frozen shoulder and diabetic frozen shoulder groups, however the diabetic group showed inferior results compared with those of the idiopathic group. This manipulation was effective and shortened the duration of symptoms in most of the idiopathic and diabetic frozen shoulders without major complications during the procedure. Diabetic frozen shoulder showed inferior clinical results and difficulty in recovery in range of motion, which indicated that diabetic frozen shoulder should be discussed as a different entity.

21 CFR 888.3660 - Shoulder joint metal/polymer semi-constrained cemented prosthesis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Shoulder joint metal/polymer semi-constrained... Shoulder joint metal/polymer semi-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits translation and rotation in one or more planes via the geometry of its...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

21 CFR 888.3660 - Shoulder joint metal/polymer semi-constrained cemented prosthesis.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Shoulder joint metal/polymer semi-constrained... Shoulder joint metal/polymer semi-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits translation and rotation in one or more planes via the geometry of its...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

21 CFR 888.3660 - Shoulder joint metal/polymer semi-constrained cemented prosthesis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Shoulder joint metal/polymer semi-constrained... Shoulder joint metal/polymer semi-constrained cemented prosthesis. (a) Identification. A shoulder joint... shoulder joint. The device limits translation and rotation in one or more planes via the geometry of its...

Reduction of obesity, as induced by leptin, reverses endothelial dysfunction in obese (Lep(ob)) mice

NASA Technical Reports Server (NTRS)

Winters, B.; Mo, Z.; Brooks-Asplund, E.; Kim, S.; Shoukas, A.; Li, D.; Nyhan, D.; Berkowitz, D. E.

2000-01-01

Obesity is a major health care problem and is associated with significant cardiovascular morbidity. Leptin, a neuroendocrine hormone released by adipose tissue, is important in modulating obesity by signaling satiety and increasing metabolism. Moreover, leptin receptors are expressed on vascular endothelial cells (ECs) and mediate angiogenesis. We hypothesized that leptin may also play an important role in vasoregulation. We investigated vasoregulatory mechanisms in the leptin-deficient obese (ob/ob) mouse model and determined the influence of leptin replacement on endothelial-dependent vasorelaxant responses. The direct effect of leptin on EC nitric oxide (NO) production was also tested by using 4, 5-diaminofluorescein-2 diacetate staining and measurement of nitrate and nitrite concentrations. Vasoconstrictor responses to phenylephrine, norepinephrine, and U-46619 were markedly enhanced in aortic rings from ob/ob mice and were modulated by NO synthase inhibition. Vasorelaxant responses to ACh were markedly attenuated in mesenteric microvessels from ob/ob mice. Leptin replacement resulted in significant weight loss and reversal of the impaired endothelial-dependent vasorelaxant responses observed in ob/ob mice. Preincubation of ECs with leptin enhanced the release of NO production. Thus leptin-deficient ob/ob mice demonstrate marked abnormalities in vasoregulation, including impaired endothelial-dependent vasodilation, which is reversed by leptin replacement. These findings may be partially explained by the direct effect of leptin on endothelial NO production. These vascular abnormalities are similar to those observed in obese, diabetic, leptin-resistant humans. The ob/ob mouse may, therefore, be an excellent new model for the study of the cardiovascular effects of obesity.

Separated Shoulder

MedlinePlus

... that hold your collarbone (clavicle) to your shoulder blade. In a mild separated shoulder, the ligaments might ... ligaments that hold your collarbone to your shoulder blade. Risk factors Participating in contact sports, such as ...

Dislocated Shoulder

MedlinePlus

... up of three bones: your collarbone, your shoulder blade, and your upper arm bone. The top of ... fits into a cuplike socket in your shoulder blade. A shoulder dislocation is an injury that happens ...

Stemless shoulder arthroplasty: a literature review

PubMed Central

PETRICCIOLI, DARIO; BERTONE, CELESTE; MARCHI, GIACOMO

2015-01-01

The design of humeral implants for shoulder arthroplasty has evolved over the years. The new-generation modular shoulder prostheses have an anatomical humeral stem that replicates the three-dimensional parameters of the proximal humerus. An anatomical reconstruction is the best way to restore stability and mobility of the prosthetic shoulder and improve implant durability. However, a perfect anatomical match is not always possible in, for example, patients with post-traumatic osteoarthritis of the shoulder and deformities in the metaphyseal region. To avoid stem-related complications while retaining the advantages of the fourth generation of shoulder implants, different stemless implants have been developed. The stemless shoulder prosthesis is a new concept in shoulder arthroplasty. The authors review the indications, surgical technique, clinical and radiological midterm results, and complications of these humeral implants. PMID:26151038

Laser resist screening for iP3500/3600 replacement for advanced reticle fabrication

NASA Astrophysics Data System (ADS)

Ota, Fumiko; Kobayashi, Hideo; Higuchi, Takao; Asakawa, Keishi

2001-01-01

This paper will describe resist screening results for iP3500/3600 replacement for the advanced laser reticle fabrication, resist coating thickness optimization proposal for the next generation as well. THMR-M100 (TOK) showed the best pattern profile with sharp shoulders and almost with no footing, and a newly developed resist, a joint-work between HOYA and a resist maker, showed the best performance in adhesion to chrome. However, there was not the best selection found unfortunately by this screening, which exceeded iP3500 in linearity and iso-dense bias (IDB) that was indispensable one for the advanced laser reticle fabrication. As regards coating thickness, we selected 307.5 nm thick as a candidate for coating thickness standard for the future with considering resist resolution performance such as linearity, γp(0-80) value and undercut, in conjunction with a risk of clear pinhole defects. For more precise comparison of iso-dense bias (IDB) performance, it would be better that the examination method is standardized because of the design pattern dependence of IDB.

Strength Asymmetry of the Shoulders in Elite Volleyball Players

PubMed Central

Hadzic, Vedran; Sattler, Tine; Veselko, Matjaž; Markovic, Goran; Dervisevic, Edvin

2014-01-01

Context: Volleyball players are reported to have shoulder strength imbalances. Previous authors have primarily investigated small samples of male players at a single skill level, without considering playing position, and with inconsistent findings. Objective: To evaluate shoulder strength asymmetry and a history of shoulder injury in a large sample of professional volleyball players of both sexes across different playing positions and skill levels. Design: Descriptive laboratory study. Patients or Other Participants: A sample of 183 volleyball players (99 men, 84 women). Main Outcome Measure(s): We assessed shoulder internal-rotator and external-rotator concentric strength at 60°/s using an isokinetic dynamometer and dominant-nondominant differences in shoulder strength and strength ratios using repeated-measures analyses of variance. Peak torque was normalized for body mass and external-rotation/internal-rotation concentric strength. Results: Internal-rotation strength was asymmetric in favor of the dominant side in both sexes, regardless of previous shoulder injury status. Male volleyball players had a lower shoulder strength ratio on the dominant side, regardless of previous shoulder injury status. However, this finding was valid only when hand dominance was taken into account. Female volleyball players playing at a higher level (ie, first versus second division) were 3.43 times more likely to have an abnormal strength ratio. Playing position was not associated with an abnormal shoulder strength ratio or strength asymmetry. Conclusions: In male volleyball players, the external-rotation/internal-rotation strength ratio of the dominant shoulder was lower, regardless of playing position, skill level, or a previous shoulder injury. In female players, the ratio was less only in those at a higher skill level. Although speculative, these findings generally suggest that female volleyball players could have a lower risk of developing shoulder-related problems than male volleyball players. Isokinetic shoulder testing may reveal important information about the possible risk factors for shoulder injuries, so we recommend including it in the functional screening of volleyball players. PMID:24673238

Strength asymmetry of the shoulders in elite volleyball players.

PubMed

Hadzic, Vedran; Sattler, Tine; Veselko, Matjaž; Markovic, Goran; Dervisevic, Edvin

2014-01-01

Volleyball players are reported to have shoulder strength imbalances. Previous authors have primarily investigated small samples of male players at a single skill level, without considering playing position, and with inconsistent findings. To evaluate shoulder strength asymmetry and a history of shoulder injury in a large sample of professional volleyball players of both sexes across different playing positions and skill levels. Descriptive laboratory study. A sample of 183 volleyball players (99 men, 84 women). We assessed shoulder internal-rotator and external-rotator concentric strength at 60°/s using an isokinetic dynamometer and dominant-nondominant differences in shoulder strength and strength ratios using repeated-measures analyses of variance. Peak torque was normalized for body mass and external-rotation/internal-rotation concentric strength. Internal-rotation strength was asymmetric in favor of the dominant side in both sexes, regardless of previous shoulder injury status. Male volleyball players had a lower shoulder strength ratio on the dominant side, regardless of previous shoulder injury status. However, this finding was valid only when hand dominance was taken into account. Female volleyball players playing at a higher level (ie, first versus second division) were 3.43 times more likely to have an abnormal strength ratio. Playing position was not associated with an abnormal shoulder strength ratio or strength asymmetry. In male volleyball players, the external-rotation/internal-rotation strength ratio of the dominant shoulder was lower, regardless of playing position, skill level, or a previous shoulder injury. In female players, the ratio was less only in those at a higher skill level. Although speculative, these findings generally suggest that female volleyball players could have a lower risk of developing shoulder-related problems than male volleyball players. Isokinetic shoulder testing may reveal important information about the possible risk factors for shoulder injuries, so we recommend including it in the functional screening of volleyball players.

The Influence of Surgical Stabilization on Glenohumeral Abduction Using 3-Dimensional Computed Tomography in Patients With Shoulder Instability.

PubMed

Bakshi, Neil K; Jameel, Omar F; Merrill, Zachary F; Debski, Richard E; Sekiya, Jon K

2016-08-01

This study compared the amount of glenohumeral abduction during arm abduction in the affected and unaffected shoulders of 3 groups of patients with shoulder instability: failed surgical stabilization, successful surgical stabilization, and unstable shoulder with no prior surgical intervention. All patients underwent bilateral shoulder computed tomography scans in 3 positions: 0° of abduction and 0° of external rotation (0-0 position), 30° of abduction and 30° of external rotation (30-30 position), and arms maximally abducted (overhead position). Three-dimensional computed tomography reconstruction was performed for both shoulders in all 3 positions. A specialized coordinate system marked specific points and directions on the humerus and glenoid of each model. These coordinates were used to calculate the glenohumeral abduction for the normal and affected sides in the 0-0, 30-30, and overhead positions. Thirty-nine patients with shoulder instability were included, of whom 14 had failed surgical repairs, 10 had successful surgical repairs, and 15 had unstable shoulders with no prior surgical intervention. In the overhead position, patients with failed surgical intervention had significantly less glenohumeral abduction in the failed shoulder (95.6° ± 12.7°) compared with the normal shoulder (101.5° ± 12.4°, P = .02). Patients with successfully stabilized shoulders had significantly less glenohumeral abduction in the successfully stabilized shoulder (93.6° ± 10.8°) compared with the normal shoulder (102.1° ± 12.5°, P = .03). Unstable shoulders with no prior surgical intervention (102.1° ± 10.3°) did not differ when compared with the normal shoulders (101.9° ± 10.9°, P = .95). Surgical intervention, regardless of its success, limits the amount of abduction at the glenohumeral joint. Level III, retrospective comparative study. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

The Shoulder Objective Practical Assessment Tool: Evaluation of a New Tool Assessing Residents Learning in Diagnostic Shoulder Arthroscopy.

PubMed

Talbot, Christopher L; Holt, Edward M; Gooding, Benjamin W T; Tennent, Thomas D; Foden, Philip

2015-08-01

To design and validate an objective practical assessment tool for diagnostic shoulder arthroscopy that would provide residents with a method to evaluate their progression in this field of surgery and to identify specific learning needs. We designed and evaluated the shoulder Objective Practical Assessment Tool (OPAT). The shoulder OPAT was designed by us, and scoring domains were created using a Delphi process. The shoulder OPAT was trialed by members of the British Elbow & Shoulder Society Education Committee for internal consistency and ease of use before being offered to other trainers and residents. Inter-rater reliability and intrarater reliability were calculated. One hundred forty orthopaedic residents, of varying seniority, within 5 training regions in the United Kingdom, were questioned regarding the tool. A pilot study of 6 residents was undertaken. Internal consistency was 0.77 (standardized Cronbach α). Inter-rater reliability was 0.60, and intrarater reliability was 0.82. The Spearman correlation coefficient (r) between the global summary score for the shoulder OPAT and the current assessment tool used in postgraduate training for orthopaedic residents undertaking diagnostic shoulder arthroscopy equaled 0.74. Of the residents, 82% agreed or strongly agreed when asked if the shoulder OPAT would be a useful tool in monitoring progression and 72% agreed or strongly agreed with the introduction of the shoulder OPAT within the orthopaedic domain. This study shows that the shoulder OPAT fulfills several aspects of reliability and validity when tested. Despite the inter-rater reliability being 0.60, we believe that the shoulder OPAT has the potential to play a role alongside the current assessment tool in the training of orthopaedic residents. The shoulder OPAT can be used to assess residents during shoulder arthroscopy and has the potential for use in medical education, as well as arthroscopic skills training in the operating theater. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Preventing pressure ulcers

MedlinePlus

... Hips Spine Tailbone area Elbows Shoulders and shoulder blades Back of the head Ears Call your health ... your tailbone area Under your shoulders and shoulder blades Under your elbows Other tips are: DO NOT ...

Comprehensive Shoulder US Examination: A Standardized Approach with Multimodality Correlation for Common Shoulder Disease

PubMed Central

Sheehan, Scott E.; Orwin, John F.; Lee, Kenneth S.

2016-01-01

Shoulder pain is one of the most common musculoskeletal conditions encountered in primary care and specialty orthopedic clinic settings. Although magnetic resonance (MR) imaging is typically the modality of choice for evaluating the soft-tissue structures of the shoulder, ultrasonography (US) is becoming an important complementary imaging tool in the evaluation of superficial soft-tissue structures such as the rotator cuff, subacromial-subdeltoid bursa, and biceps tendon. The advantages of US driving its recent increased use include low cost, accessibility, and capability for real-time high-resolution imaging that enables dynamic assessment and needle guidance. As more radiologists are considering incorporating shoulder US into their practices, the development of a standardized approach to performing shoulder US should be a priority to facilitate the delivery of high-quality patient care. Familiarity with and comfort in performing a standardized shoulder US examination, as well as knowledge of the types of anomalies that can be evaluated well with US, will enhance the expertise of those working in musculoskeletal radiology practices and add value in the form of increased patient and health care provider satisfaction. This review describes the utility and benefits of shoulder US as a tool that complements MR imaging in the assessment of shoulder pain. A standardized approach to the shoulder US examination is also described, with a review of the basic technique of this examination, normal anatomy of the shoulder, common indications for shoulder US, and characteristic US findings of common shoulder diseases—with select MR imaging and arthroscopic correlation. Online supplemental material is available for this article. ©RSNA, 2016 PMID:27726738

Isometric shoulder strength in young swimmers.

PubMed

McLaine, Sally J; Ginn, Karen A; Fell, James W; Bird, Marie-Louise

2018-01-01

The prevalence of shoulder pain in young swimmers is high. Shoulder rotation strength and the ratio of internal to external rotation strength have been reported as potential modifiable risk factors associated with shoulder pain. However, relative strength measures in elevated positions, which include flexion and extension, have not been established for the young swimmer. The aim of this study was to establish clinically useful, normative shoulder strength measures and ratios for swimmers (14-20 years) without shoulder pain. Cross-sectional, observational study. Swimmers (N=85) without a recent history of shoulder pain underwent strength testing of shoulder flexion and extension (in 140° abduction); and internal and external rotation (in 90° abduction). Strength tests were performed in supine using a hand-held dynamometer and values normalised to body weight. Descriptive statistics were calculated for strength and strength ratios (flexion:extension and internal:external rotation). Differences between groups (based on gender, history of pain, test and arm dominance) were explored using independent and paired t tests. Normative shoulder strength values and ratios were established for young swimmers. There was a significant difference (p<0.002) in relative strength between males and females for all tests with no differences in strength ratios. Relative strength of the dominant and non-dominant shoulders (except for extension); and for swimmers with and without a history of shoulder pain was not significantly different. A normal shoulder strength profile for the young swimmer has been established which provides a valuable reference for the clinician assessing shoulder strength in this population. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Cutoff value of Japanese Orthopaedic Association shoulder score in patients with rotator cuff repair: Based on the University of California at Los Angeles shoulder score.

PubMed

Imai, Takaki; Gotoh, Masafumi; Tokunaga, Tsuyoshi; Kawakami, Jyunichi; Mitsui, Yasuhiro; Fukuda, Keiji; Ogino, Misa; Okawa, Takahiro; Shiba, Naoto

2017-05-01

The Japanese Orthopaedic Association shoulder score cutoff values were calculated in patients with rotator cuff repair using the University of California at Los Angeles shoulder score. Overall, 175 patients with rotator cuff repair were subjects in this study. The University of California at Los Angeles and Japanese Orthopaedic Association shoulder scores were evaluated before surgery and at 3, 6, 9, and 12 months after surgery. The cutoff value of the Japanese Orthopaedic Association shoulder score was determined using the 4-stage criteria of the University of California at Los Angeles shoulder score and a University of California at Los Angeles shoulder score of 28 points, which is the boundary between an excellent/good group and a fair/poor group. Both the JOA shoulder and UCLA shoulder scores showed significant improvement at 6, 9, and 12 months from the preoperative scores (p < 0.0001). There was a strong correlation between the total values of the two scores (r = 0.85, p < 0.0001). The cutoff value of the Japanese Orthopaedic Association shoulder score based on the highest accuracy from receiver operating characteristic curve analysis was 83 points. A Japanese Orthopaedic Association shoulder score cutoff value of 83 was equivalent to a University of California at Los Angeles shoulder score cutoff value of 28 for distinguishing between excellent/good and fair/poor outcomes after rotator cuff repair. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Indications and outcomes of shoulder arthroscopy after shoulder arthroplasty.

PubMed

Horner, Nolan S; de Sa, Darren; Heaven, Sebastian; Simunovic, Nicole; Bedi, Asheesh; Athwal, George S; Ayeni, Olufemi R

2016-03-01

Arthroscopy is a widely used intervention in the treatment of a variety of shoulder conditions. Arthroscopy has also been selectively used in symptomatic patients after shoulder arthroplasty. The purpose of this systematic review was to determine indications for shoulder arthroscopy in patients after shoulder arthroplasty and to report patient outcomes after these procedures. The electronic databases MEDLINE, EMBASE, and PubMed were searched and screened in duplicate for studies involving shoulder arthroscopy in shoulder arthroplasty patients. A full-text review of eligible studies was conducted in duplicate, and references were searched using predetermined inclusion and exclusion criteria. The review included 11 studies containing 84 patients. All were Level IV evidence. The most common indications for shoulder arthroscopy in the setting of shoulder arthroplasty were pain or loss of range of motion without a clear diagnosis, suspected periprosthetic infection, and rotator cuff assessment. Although 92% of patients were satisfied with the procedure and standardized shoulder scores increased in all studies that reported them, 44% of patients still went on to additional revision surgery after arthroscopy. Shoulder arthroscopy in patients after arthroplasty is most frequently used as a diagnostic tool; however, it has utility in treating a number of predetermined pathologies. Despite the low sample size and quality of evidence in our review, patient satisfaction after arthroscopy is high because standardized outcome scores improve, and the risk of complications is low. However, a high percentage of patients who receive arthroscopy later require further surgery. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Analysis of factors that affect shoulder balance after correction surgery in scoliosis: a global analysis of all the curvature types.

PubMed

Hong, Jae-Young; Suh, Seung-Woo; Modi, Hitesh N; Yang, Jae-Hyuk; Park, Si-Young

2013-06-01

To identify factors that can affect postoperative shoulder balance in AIS. 89 adolescent idiopathic scoliosis patients with six types of curvatures who underwent surgery were included in this study. Whole spine antero-posterior and lateral radiographs were obtained pre- and postoperatively. In radiograms, shape and changes in curvatures were analyzed. In addition, four shoulder parameters and coronal balance were analyzed in an effort to identify factors significantly related to postoperative shoulder balance. In general, all the four shoulder parameters (CHD, CA, CRID, RSH) were slightly increased at final follow up (t test, P < 0.05), although there was a decrease in Lenke type II and IV curvatures. However, pre- and postoperative shoulder parameters were not significantly different between each curvature types (ANOVA, P > 0.05). Moreover, no significant differences of pre- and postoperative shoulder level between different level of proximal fusion groups (ANOVA, P > 0.05) existed. In the analysis of coronal curvature changes, no difference was observed in every individual coronal curvatures between improved shoulder balance and aggravated groups (P > 0.05). However, the middle to distal curve change ratio was significantly lower in patients with aggravated shoulder balance (P < 0.05). In addition, patients with smaller preoperative shoulder imbalance showed the higher chance of aggravation after surgery with similar postoperative changes (P < 0.05). Significant relations were found between correction rate of middle, and distal curvature, and postoperative shoulder balance. In addition, preoperative shoulder level difference can be a determinant of postoperative shoulder balance.

Shoulder joint loading and posture during medicine cart pushing task.

PubMed

Xu, Xu; Lin, Jia-Hua; Boyer, Jon

2013-01-01

Excessive physical loads and awkward shoulder postures during pushing and pulling are risk factors for shoulder pain. Pushing a medicine cart is a major component of a work shift for nurses and medical assistants in hospitals and other health care facilities. A laboratory experiment was conducted to examine the effects of common factors (e.g., lane congestion, cart load stability, floor surface friction) on shoulder joint moment and shoulder elevation angle of participants during cart pushing. Participants pushed a medicine cart on straight tracks and turning around right-angle corners. Peak shoulder joint moments reached 25.1 Nm, 20.3 Nm, and 26.8 Nm for initial, transition, and turning phases of the pushing tasks, indicating that shoulder joint loading while pushing a medical cart is comparable to levels previously reported from heavy manual activities encountered in industry (e.g., garbage collection). Also, except for user experience, all other main study factors, including congestion level, cart load stability, location of transition strip, shoulder tendency, surface friction, and handedness, significantly influenced shoulder joint moment and shoulder elevation angle. The findings provide a better understanding of shoulder exposures associated with medicine cart operations and may be helpful in designing and optimizing the physical environment where medicine carts are used.

Influence of Playing a Prolonged Tennis Match on Shoulder Internal Range of Motion.

PubMed

Martin, Caroline; Kulpa, Richard; Ezanno, Felix; Delamarche, Paul; Bideau, Benoit

2016-08-01

Shoulder range of motion (ROM) deficits have been identified as an injury risk factor among tennis players. It is well known that shoulder internal rotation deficit increases with age and years of play, but there is a lack of knowledge regarding the influence of a prolonged tennis match on shoulder ROM. To examine changes in shoulder ROM during a prolonged tennis match. Descriptive laboratory study. Shoulder passive internal and external rotation ROM were measured on 8 male tennis players before, every 30 minutes during, and just after a 3-hour tennis match. Total ROM was calculated as the combination of shoulder internal and external rotations. Ball velocity on the serve was measured with a radar gun before, at midmatch, and just after the match. Decreases in shoulder internal rotation (-20.8°; P = .005), total ROM (-24.6°; P = .001), and serve velocity (-1.8 m/s; P = .002) were observed at the end of the match. No statistically significant difference was observed for shoulder external rotation after the match (P = .460). Passive shoulder internal rotation and total ROM are significantly decreased during a 3-hour tennis match. The results show that a prolonged tennis match play can modify values of shoulder ROM. © 2016 The Author(s).

Shoulder range of motion and strength in young competitive tennis players with and without history of shoulder problems.

PubMed

Gillet, Benoît; Begon, Mickaël; Diger, Marine; Berger-Vachon, Christian; Rogowski, Isabelle

2018-05-01

To assess the effect of a history of shoulder problems on the shoulder flexibility and strength in young competitive tennis players. Cross-sectional study. Ninety-one competitive and asymptomatic tennis players aged between 8 and 15 years old were divided into two groups according to the presence or absence of a history of shoulder problems. Glenohumeral joint ranges of motion and the strength of eight shoulder muscles were bilaterally assessed. Five agonist/antagonist muscle strength ratios were also reported. Ranges of motion, strengths and strength ratios were bilaterally compared between the two groups. Players with a history of shoulder problems presented a higher total arc of rotation for both glenohumeral joints (p = 0.02) and a lower external/internal glenohumeral rotator muscle strength ratio (p = 0.02) for both sides. They also presented stronger upper trapezius (p = 0.03) and dominant serratus anterior (p = 0.008) muscles than players without a history of shoulder problems. Having a history of shoulder problems may alter the balance between mobility and stability within the shoulder complex suggesting that particular attention should be given to dominant and non-dominant shoulder functions by coaches and clinicians. Copyright © 2018 Elsevier Ltd. All rights reserved.

Command control for functional electrical stimulation hand grasp systems using miniature accelerometers and gyroscopes.

PubMed

Tong, K Y; Mak, A F T; Ip, W Y

2003-11-01

Recent commercially available miniature sensors have the potential to improve the functions of functional electrical stimulation (FES) systems in terms of control, reliability and robustness. A new control approach using a miniature gyroscope and an accelerometer was studied. These sensors were used to detect the linear acceleration and angular velocity of residual voluntary movements on upper limbs and were small and easy to put on. Five healthy subjects and three cervical spinal cord injured subjects were recruited to evaluate this controller. Sensors were placed on four locations: the shoulder, upper arm, wrist and hand. A quick forward-and-backward movement was employed to produce a distinctive waveform that was different from general movements. A detection algorithm was developed to generate a command signal by identifying this distinctive waveform through the detection of peaks and valleys in the sensor's signals. This command signal was used to control different FES hand grasp patterns. With a specificity of 0.9, the sensors had a success rate of 85-100% on healthy subjects and 82-97% on spinal cord injured subjects. In terms of sensor placement, the gyroscope was better as a control source than the accelerometer for wrist and hand positions, but the reverse was true for the shoulder.

Frozen shoulder

MedlinePlus

... Changes in your hormones, such as during menopause Shoulder injury Shoulder surgery Open heart surgery Cervical disk disease ... and the A.D.A.M. Editorial team. Shoulder Injuries and Disorders Read more NIH MedlinePlus Magazine Read ...

Shoulder Blade Squeeze (Posture Exercise)

MedlinePlus

... Weight Exercise at Home Shoulder Blade Squeeze Shoulder Blade Squeeze Make an Appointment Ask a Question Find ... it: Stand straight and tall. Pull your shoulder blades back and slightly downward to bring your elbows ...

Shoulder surgery - discharge

MedlinePlus

... do not have to. Activity If you had rotator cuff or other ligament or labral surgery, you need ... 2015:chap 45. Read More Frozen shoulder Osteoarthritis Rotator cuff problems Rotator cuff repair Shoulder arthroscopy Shoulder CT ...

Dislocated Shoulder: Symptoms and Causes

MedlinePlus

... arm bone pops out of the cup-shaped socket that's part of your shoulder blade. The shoulder ... your upper arm bone out of your shoulder socket. Partial dislocation — in which your upper arm bone ...

Evaluation of regression-based 3-D shoulder rhythms.

PubMed

Xu, Xu; Dickerson, Clark R; Lin, Jia-Hua; McGorry, Raymond W

2016-08-01

The movements of the humerus, the clavicle, and the scapula are not completely independent. The coupled pattern of movement of these bones is called the shoulder rhythm. To date, multiple studies have focused on providing regression-based 3-D shoulder rhythms, in which the orientations of the clavicle and the scapula are estimated by the orientation of the humerus. In this study, six existing regression-based shoulder rhythms were evaluated by an independent dataset in terms of their predictability. The datasets include the measured orientations of the humerus, the clavicle, and the scapula of 14 participants over 118 different upper arm postures. The predicted orientations of the clavicle and the scapula were derived from applying those regression-based shoulder rhythms to the humerus orientation. The results indicated that none of those regression-based shoulder rhythms provides consistently more accurate results than the others. For all the joint angles and all the shoulder rhythms, the RMSE are all greater than 5°. Among those shoulder rhythms, the scapula lateral/medial rotation has the strongest correlation between the predicted and the measured angles, while the other thoracoclavicular and thoracoscapular bone orientation angles only showed a weak to moderate correlation. Since the regression-based shoulder rhythm has been adopted for shoulder biomechanical models to estimate shoulder muscle activities and structure loads, there needs to be further investigation on how the predicted error from the shoulder rhythm affects the output of the biomechanical model. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Work-related shoulder-neck complaints in industry: a pilot study.

PubMed

Bjelle, A; Hagberg, M; Michaelson, G

1987-10-01

Twenty-six industrial workers, selected from employment records, were examined with a questionnaire, anthropometric measures, muscle strength measurements and filming during work cycles to study the influence of ergonomic factors on shoulder-neck complaints. No differences were observed when comparing age or anthropometric measurements between the nine workers with and the 17 without shoulder-neck complaints. Significantly weaker shoulder muscles were found in workers with shoulder-neck complaints than in those without. A higher median strain on the shoulders in the working situation of workers with shoulder-neck complaints than in the group with no complaints was suggested from the results of a biomechanical analysis of the different work tasks.

Navigating the Alphabet Soup of Labroligamentous Pathology of the Shoulder.

PubMed

Fitzpatrick, Darren; Grubin, Jeremy

2016-02-01

Because of the widespread use of eponyms and acronyms to describe labroligamentous findings in the shoulder, interpreting shoulder magnetic resonance imaging reports can be challenging. A summary of the appearance of these lesions on shoulder magnetic resonance images can help the orthopedic surgeon to understand these entities as imaging findings and to determine the appropriate treatment for patients with shoulder injuries.

The volleyball athlete's shoulder: biomechanical adaptations and injury associations.

PubMed

Challoumas, Dimitrios; Stavrou, Antonio; Dimitrakakis, Georgios

2017-06-01

In volleyball, the dominant shoulder of the athlete undergoes biomechanical and morphological adaptations; however, definitive conclusions about their exact nature, aetiology, purpose and associations with shoulder injury have not been reached. We present a systematic review of the existing literature describing biomechanical adaptations in the dominant shoulders of volleyball players and factors that may predispose to shoulder pain/injury. A thorough literature search via Medline, EMBASE and SCOPUS was conducted for original studies of volleyball players and 15 eligible articles were identified. Assessment of study quality was performed using the STROBE statement. The reviewed literature supports the existence of a glenohumeral internal rotation deficit (GIRD) and a possible (and less pronounced) external rotation gain in the dominant vs. the non-dominant shoulder of volleyball athletes. Unlike other overhead sports, the GIRD in volleyball athletes appears to be anatomical as a response to the repetitive overhead movements and not to be associated with shoulder pain/injury. Additionally, the dominant shoulder exhibits muscular imbalance, which appears to be a significant risk factor for shoulder pain. Strengthening of the external rotators should be used alongside shoulder stretching and joint mobilisations, core strengthening and optimisation of spike technique as part of injury management and prevention programmes.

The effects of shoulder stabilization exercises and pectoralis minor stretching on balance and maximal shoulder muscle strength of healthy young adults with round shoulder posture.

PubMed

Kim, Mi-Kyoung; Lee, Jung Chul; Yoo, Kyung-Tae

2018-03-01

[Purpose] The purpose of this study was to analyze the effects of pectoralis minor stretching and shoulder strengthening with an elastic band on balance and maximal shoulder muscle strength in young adults with rounded shoulder posture. [Subjects and Methods] Nineteen subjects with rounded shoulder posture were randomly divided into 2 groups: a shoulder stabilization exercise group and a stretching exercise group. The groups performed each exercise for 40 minutes, 3 times a week, for 4 weeks. Static balance (eyes open and closed), dynamic balance (the limits of stability in 4 directions) and shoulder muscle strength in 5 directions were measure before and after the exercises. [Results] The stretching exercise demonstrated a significant difference between the pre- and post-exercise in the static balance with eyes closed and extension and horizontal abduction strength while the stabilization exercise demonstrated significant difference in the left and right directions between the pre- and post-exercise of the dynamic balance and flexion strength. The stabilization exercise demonstrated significant differences shown in the flexion between the pre- and post-test. [Conclusion] The shoulder stabilization and stretching exercises improved the static balance, dynamic balance, and muscle strength.

Italian cross-cultural adaptation and validation of three different scales for the evaluation of shoulder pain and dysfunction after neck dissection: University of California - Los Angeles (UCLA) Shoulder Scale, Shoulder Pain and Disability Index (SPADI) and Simple Shoulder Test (SST).

PubMed

Marchese, C; Cristalli, G; Pichi, B; Manciocco, V; Mercante, G; Pellini, R; Marchesi, P; Sperduti, I; Ruscito, P; Spriano, G

2012-02-01

Shoulder syndrome after neck dissection is a well known entity, but its incidence and prognostic factors influencing recovery have not been clearly assessed due to the heterogeneity of possible evaluations. The University of California - Los Angeles (UCLA) Shoulder Scale, the Shoulder Pain and Disability Index (SPADI) and the Simple Shoulder Test (SST) are three English-language questionnaires commonly used to test shoulder impairment. An Italian version of these scales is not available. The aim of the present study was to translate, culturally adapt and validate an Italian version of UCLA Shoulder Scale, SPADI and SST. Translation and cross-cultural adaptation of the SPADI, the UCLA shoulder scale and the SST was performed according to the international guidelines. Sixty-six patients treated with neck dissection for head and neck cancer were called to draw up these scales. Forty patients completed the same questionnaires a second time one week after the first to test the reproducibility of the Italian versions. All the English-speaking Italian patients (n = 11) were asked to complete both the English and the Italian versions of the three questionnaires to validate the scales. No major problems regarding the content or the language were found during the translation of the 3 questionnaires. For all three scales, Cronbach's α was > 0.89. The Pearson correlation coefficient was r > 0.91. With respect to validity, there was a significant correlation between the Italian and the English versions of all three scales. This study shows that the Italian versions of UCLA Shoulder Scale, SPADI and SST are valid instruments for the evaluation of shoulder dysfunction after neck dissection in Italian patients.

Investigation of central pain processing in shoulder pain: converging results from two musculoskeletal pain models

PubMed Central

Valencia, Carolina; Kindler, Lindsay L.; Fillingim, Roger B.; George, Steven Z.

2011-01-01

Recent reports suggest deficits in conditioned pain modulation (CPM) and enhanced suprathreshold heat pain response (SHPR) potentially play a role in the development of chronic pain. The purpose of this study was to investigate whether central pain processing was altered in 2 musculoskeletal shoulder pain models. The goals of this study were to determine whether central pain processing: 1) differs between healthy subjects and patients with clinical shoulder pain, 2) changes with induction of exercise induced muscle pain (EIMP), and 3) changes 3 months after shoulder surgery. Fifty eight patients with clinical shoulder pain and 56 age and sex matched healthy subjects were included in these analyses. The healthy cohort was examined before inducing EIMP, and 48 and 96 hours later. The clinical cohort was examined before shoulder surgery and 3 months later. CPM did not differ between the cohorts, however; SHPR was elevated for patients with shoulder pain compared to healthy controls. Induction of acute shoulder pain with EIMP resulted in increased shoulder pain intensity but did not change CPM or SHPR. Three months following shoulder surgery clinical pain intensity decreased but CPM was unchanged from pre-operative assessment. In contrast SHPR was decreased and showed values comparable with healthy controls at 3 months. Therefore, the present study suggests that: 1) clinical shoulder pain is associated with measurable changes in central pain processing, 2) exercise-induced shoulder pain did not affect measures of central pain processing, and 3) elevated SHPR was normalized with shoulder surgery. Collectively our findings support neuroplastic changes in pain modulation were associated with decreases in clinical pain intensity only, and could be detected more readily with thermal stimuli. PMID:22208804

Arthroscopic Findings in Anterior Shoulder Instability

PubMed Central

Hantes, Michael; Raoulis, Vasilios

2017-01-01

Background: In the last years, basic research and arthroscopic surgery, have improved our understanding of shoulder anatomy and pathology. It is a fact that arthroscopic treatment of shoulder instability has evolved considerably over the past decades. The aim of this paper is to present the variety of pathologies that should be identified and treated during shoulder arthroscopy when dealing with anterior shoulder instability cases. Methods: A review of the current literature regarding arthroscopic shoulder anatomy, anatomic variants, and arthroscopic findings in anterior shoulder instability, is presented. In addition, correlation of arthroscopic findings with physical examination and advanced imaging (CT and MRI) in order to improve our understanding in anterior shoulder instability pathology is discussed. Results: Shoulder instability represents a broad spectrum of disease and a thorough understanding of the pathoanatomy is the key for a successful treatment of the unstable shoulder. Patients can have a variety of pathologies concomitant with a traditional Bankart lesion, such as injuries of the glenoid (bony Bankart), injuries of the glenoid labrum, superiorly (SLAP) or anteroinferiorly (e.g. anterior labroligamentous periosteal sleeve avulsion, and Perthes), capsular lesions (humeral avulsion of the glenohumeral ligament), and accompanying osseous-cartilage lesions (Hill-Sachs, glenolabral articular disruption). Shoulder arthroscopy allows for a detailed visualization and a dynamic examination of all anatomic structures, identification of pathologic findings, and treatment of all concomitant lesions. Conclusion: Surgeons must be well prepared and understanding the normal anatomy of the glenohumeral joint, including its anatomic variants to seek for the possible pathologic lesions in anterior shoulder instability during shoulder arthroscopy. Patient selection criteria, improved surgical techniques, and implants available have contributed to the enhancement of clinical and functional outcomes to the point that arthroscopic treatment is considered nowadays the standard of care. PMID:28400880

Does arthroscopic rotator cuff repair improve patients' activity levels?

PubMed

Baumgarten, Keith M; Chang, Peter S; Dannenbring, Tasha M; Foley, Elaine K

2018-06-04

Rotator cuff repair decreases pain, improves range of motion, and increases strength. Whether these improvements translate to an improvement in a patient's activity level postoperatively remains unknown. The Shoulder Activity Level is a valid and reliable outcomes survey that can be used to measure a patient's shoulder-specific activity level. Currently, there are no studies that examine the effect of rotator cuff repair on shoulder activity level. Preoperative patient-determined outcomes scores collected prospectively on patients undergoing rotator cuff repair were compared with postoperative scores at a minimum of 2 years. These scores included the Shoulder Activity Level, Western Ontario Rotator Cuff Index, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Single Assessment Numeric Evaluation, and simple shoulder test. Inclusion criteria were patients undergoing arthroscopic rotator cuff repair. Included were 281 shoulders from 273 patients with a mean follow-up of 3.7 years. The postoperative median Western Ontario Rotator Cuff Index (42 vs. 94), American Shoulder and Elbow Surgeons (41 vs. 95), Single Assessment Numeric Evaluation (30 vs. 95), and simple shoulder test (4 vs. 11) scores were statistically significantly improved compared with preoperative scores (P < .0001). The postoperative median Shoulder Activity Level score decreased compared with the preoperative score (12 vs. 11; P < .0001). Patients reported a statistically significant deterioration of their Shoulder Activity Level score after rotator cuff repair compared with their preoperative scores, although disease-specific and joint-specific quality of life scores all had statistically significantly improvement. This study suggests that patients generally have (1) significant improvements in their quality of life and (2) small deteriorations in activity level after arthroscopic rotator cuff repair. Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The outcome of manipulation under general anesthesia for the management of frozen shoulder in patients with diabetes mellitus.

PubMed

Jenkins, Emily F; Thomas, William J C; Corcoran, John P; Kirubanandan, Ravisankar; Beynon, Celia R; Sayers, Adrian E; Woods, David A

2012-11-01

Frozen shoulder has a greater incidence, more severe course, and resistance to treatment in patients with diabetes mellitus compared with the general population. We hypothesized that diabetic patients with frozen shoulder undergoing treatment with manipulation under general anaesthesia (MUA) would have the same outcome as patients without diabetes. We retrospectively analyzed data collected during a 10-year period of referrals for frozen shoulder. In all cases, a standardized MUA protocol was followed once the diagnosis of frozen shoulder in the frozen phase was made; this included an early repeat MUA in individuals with recurrence. We compared outcomes for patients documented as having diabetes with a nondiabetic control group and assessed the effect of insulin dependence and frozen shoulder etiology within the diabetic group. Of a consecutive series of 315 frozen shoulders, 36 patients (39 shoulders) were included in the diabetic group, with 256 patients (274 shoulders) as controls. There was a significant improvement in range of movement and Oxford Shoulder Score (P all <.001), with no difference between diabetic and control groups at early or late follow-up (mean, 41 months). A repeat procedure was required in 36% of diabetic patients compared with 15% of control patients. Recurrence in the diabetic group was influenced by etiology (47% of primary vs 0% of secondary frozen shoulders) and insulin requirement (39% insulin-dependent vs. 31% non-insulin-dependent). We provide a strategy for the management of diabetic frozen shoulders using MUA and estimates of success and recurrence rates that may be useful when informing consent. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. All rights reserved.

Structural Analysis and Design of PCC Shoulders

DOT National Transportation Integrated Search

1982-04-01

A structural evaluation of PCC highway shoulders has been conducted and a comprehensive design procedure for plain jointed concrete shoulders developed. The procedure can be used to provide PCC shoulders either for rehabilitation of existing pavement...

Recurrent Shoulder Dystocia: Risk Factors and Counseling.

PubMed

Gurewitsch Allen, Edith D

2016-12-01

A prior history of delivery complicated by shoulder dystocia confers a 6-fold to nearly 30-fold increased risk of shoulder dystocia recurrence in a subsequent vaginal delivery, with most reported rates between 12% and 17%. Whereas prevention of shoulder dystocia in the general population is neither feasible nor cost-effective, directing intervention efforts at the particular subgroup of women with a prior history of shoulder dystocia has merit. Potentially modifiable risk factors and individualized management strategies that may reduce shoulder dystocia recurrence and its associated significant morbidities are reviewed.

Predictors of shoulder dystocia at the time of operative vaginal delivery.

PubMed

Palatnik, Anna; Grobman, William A; Hellendag, Madeline G; Janetos, Timothy M; Gossett, Dana R; Miller, Emily S

2016-11-01

It remains uncertain whether clinical factors known prior to delivery can predict which women are more likely to experience shoulder dystocia in the setting of operative vaginal delivery. We sought to identify whether shoulder dystocia can be accurately predicted among women undergoing an operative vaginal delivery. This was a case-control study of women undergoing a low or outlet operative vaginal delivery from 2005 through 2014 in a single tertiary care center. Cases were defined as women who experienced a shoulder dystocia at the time of operative vaginal delivery. Controls consisted of women without a shoulder dystocia at the time of operative vaginal delivery. Variables previously identified to be associated with shoulder dystocia that could be known prior to delivery were abstracted from the medical records. Bivariable analyses and multivariable logistic regression were used to identify factors independently associated with shoulder dystocia. A receiver operating characteristic curve was created to evaluate the predictive value of the model for shoulder dystocia. Of the 4080 women who met inclusion criteria, shoulder dystocia occurred in 162 (4.0%) women. In bivariable analysis, maternal age, parity, body mass index, diabetes, chorioamnionitis, arrest disorder as an indication for an operative vaginal delivery, vacuum use, and estimated fetal weight >4 kg were significantly associated with shoulder dystocia. In multivariable analysis, parity, diabetes, chorioamnionitis, arrest disorder as an indication for operative vaginal delivery, vacuum use, and estimated fetal weight >4 kg remained independently associated with shoulder dystocia. The area under the curve for the generated receiver operating characteristic curve was 0.73 (95% confidence interval, 0.69-0.77), demonstrating only a modest ability to predict shoulder dystocia before performing an operative vaginal delivery. While risk factors for shoulder dystocia at the time of operative vaginal delivery can be identified, reliable prediction of shoulder dystocia in this setting cannot be attained. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation of Shoulder-Stabilizing Braces: Can We Prevent Shoulder Labrum Injury in Collegiate Offensive Linemen?

PubMed

Baker, Hayden P; Tjong, Vehniah K; Dunne, Kevin F; Lindley, Tory R; Terry, Michael A

2016-12-01

Shoulder injuries remain one of the most common injuries among collegiate football athletes. Offensive linemen in particular are prone to posterior labral pathology. To evaluate the efficacy of shoulder bracing in collegiate offensive linemen with respect to injury prevention, severity, and lost playing time. Cohort study; Level of evidence, 3. Offensive linemen at a single collegiate institution wore bilateral shoulder-stabilizing braces for every contact practice and game beginning in the spring of 2013. Between spring of 2007 and fall of 2012, offensive linemen did not wear any shoulder braces. Player injury data were collected for all contact practices and games throughout these time periods to highlight differences with brace use. Forty-five offensive linemen (90 shoulders) participated in spring and fall college football seasons between 2007 and 2015. There were 145 complete offensive linemen seasons over the course of the study. Offensive linemen not wearing shoulder braces completed 87 seasons; offensive linemen wearing shoulder braces completed 58 seasons. Posterior labral tear injury rates were calculated for players who wore the shoulder braces (0.71 per 1000 athlete-exposures) compared with shoulders of players who did not wear the braces (1.90 per 1000 athlete-exposures). The risk ratio was 0.46 (95% CI, 0.16-1.30; P = .14). Mean time (contact practices and games) missed due to injury was significant, favoring less time missed by players who used braces (8.7 vs 36.60 contact practices and games missed due to injury; P = .0019). No significant difference in shoulder labral tears requiring surgery was found for brace use compared with no brace use. Shoulder-stabilizing braces were shown not to prevent posterior labral tears among collegiate offensive lineman, although they were associated with less time lost to injury. The results of this study have clinical significance, indicating that wearing a shoulder brace provides a protective factor for offensive linemen.

Reliability of shoulder internal rotation passive range of motion measurements in the supine versus sidelying position.

PubMed

Lunden, Jason B; Muffenbier, Mike; Giveans, M Russell; Cieminski, Cort J

2010-09-01

Clinical measurement, reliability. To compare intrarater and interrater reliability of shoulder internal rotation (IR) passive range of motion measurements utilizing a standard supine position and a sidelying position. Glenohumeral IR range of motion deficits are often noted in patients with shoulder pathology. Excellent intrarater reliability has been found when measuring this motion. However, interrater reliability has been reported as poor to fair. Some clinicians currently use a sidelying position for IR stretching with patients who have shoulder pathology. However, no objective data exist for IR passive range of motion measured in this sidelying position, either in terms of reliability or normative values. Seventy subjects (mean age, 36.8 years), with (n = 19) and without (n = 51) shoulder pathology, were included in this study. Shoulder IR passive range of motion of the dominant shoulder or involved shoulder was measured by 2 investigators in 2 positions: (1) a standard supine position, with the shoulder at 90 degrees of abduction, and (2) in sidelying on the tested side, with the shoulder flexed to 90 degrees . Intrarater reliability for supine measurements was good to excellent (ICC3,1 = 0.70-0.93) and for sidelying measurements was excellent (ICC3,1 = 0.94-0.98). Interrater reliability was fair to good for the supine measurement (ICC2,2 = 0.74-0.81) and good to excellent for the sidelying measurement (ICC2,2 = 0.88-0.96). The mean (range) value of the dominant shoulder sidelying IR passive range of motion was 40 degrees (11 degrees to 69 degrees ) for healthy subjects and 25 degrees (-16 degrees to 49 degrees) for subjects with shoulder pathology. For subjects with shoulder pathology, measurements of shoulder IR made in the sidelying position had superior intrarater and interrater reliability compared to those in the standard supine position.

Shoulder Instability

MedlinePlus

... as bad as the pain of a sudden injury. Your shoulder might be sore when you move it. It ... Treatment How is shoulder instability treated? Treatment for shoulder instability depends on how bad your injury is and how important it is for you ...

Shoulder pain

MedlinePlus

Pain - shoulder ... changes around the rotator cuff can cause shoulder pain. You may have pain when lifting the arm above your head or ... The most common cause of shoulder pain occurs when rotator cuff tendons ... The tendons become inflamed or damaged. This condition ...

Decreased shoulder function and pain common in recreational badminton players.

PubMed

Fahlström, M; Söderman, K

2007-06-01

The aim of this study was to describe the prevalence and consequences of painful conditions in the shoulder region in recreational badminton players. A questionnaire study was performed on 99 players, of whom 57 were also assessed with Constant score. Previous or present pain in the dominant shoulder was reported by 52% of the players. Sixteen percent of the players had on-going shoulder pain associated with badminton play. A majority of these players reported that their training habits were affected by the pain. Total Constant score was lower in the painful shoulders. Furthermore, range of active pain-free shoulder abduction was decreased. However, isometric shoulder strength test showed no differences when compared with pain-free shoulders. Even though the pain caused functional problems, the players were still playing with on-going symptoms. The diagnoses were mostly unknown, although history and clinical tests indicate problems resembling subacromial impingement.

Role of Tool Shoulder End Features on Friction Stir Weld Characteristics of 6082 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Mugada, Krishna Kishore; Adepu, Kumar

2018-03-01

Understanding the temperature generation around the tool shoulder contact is one of the important aspects of the friction stir welding process. In the present study, the effects of various tool shoulder end feature on the temperature and mechanical properties of the 6082 aluminum alloy were investigated. The experimental results show that the axial force during the welding is considerably reduced by using tools with shoulder end features. The detailed observation revealed that around the tool shoulder contact, the amount of heat generation is higher between trialing edge (TE) to retreating side-leading edge corner (RS-LE) counter clockwise direction and lower between RS-LE to TE clockwise direction. Out of the four shoulder end featured tools, the welds produced with ridges shoulder tool resulted in superior properties with significantly lower axial force (approximately 32%) compared to plane shoulder tool.

Influence of beach chair position on cerebral oxygen saturation: a comparison of INVOS and FORE-SIGHT cerebral oximeter.

PubMed

Closhen, Dorothea; Berres, Manfred; Werner, Christian; Engelhard, Kristin; Schramm, Patrick

2013-10-01

Although beach chair position (BCP) is frequently used for shoulder surgery, a potentially detrimental influence on cerebral oxygenation is discussed. Therefore, the present study investigated changes in regional cerebral oxygen saturation (rSO2/StO2) during BCP comparing 2 different devices for near-infrared spectroscopy measurement. Data were collected in 35 patients undergoing shoulder surgery in BCP and compared with a control group of 35 awake volunteers. The rSO2/StO2 was assessed using INVOS and FORE-SIGHT monitors. Mean arterial blood pressure (MAP), peripheral oxygen saturation (SpO2), PeCO2, FiO2, end-tidal sevoflurane concentration, and rSO2/StO2 were measured before positioning, during BCP, and in supine position after surgery. A decrease in rSO2/StO2 could be observed after BCP (INVOS: 76.1% supine vs. 66.7% BCP, P<0.001; FORE-SIGHT: 78.6% supine, 66.1% BCP, P<0.001), which was reversible in supine position. This decrease correlated with MAP during BCP, while in supine position no correlation was detected. In control group BCP did not influence rSO2/StO2. Changes detected with INVOS or FORE-SIGHT cerebral oximeter did not differ. BCP is associated with a decrease in rSO2/StO2 of 10% in anesthetized patients, which is reversible after repositioning. No changes occurred in supine position under general anesthesia as well as in awake subjects in BCP. This underlines the assumption that vasodilation by anesthetics in combination with BCP evoke a drop in rSO2/StO2. A strict hemodynamic management may be necessary to prevent desaturation events. Despite different technology used by the devices, the results of INVOS and FORE-SIGHT cerebral oximeters are comparable.

Subscapularis- and deltoid-sparing vs traditional deltopectoral approach in reverse shoulder arthroplasty: a prospective case-control study.

PubMed

Lädermann, Alexandre; Denard, Patrick Joel; Tirefort, Jérome; Collin, Philippe; Nowak, Alexandra; Schwitzguebel, Adrien Jean-Pierre

2017-07-14

With the growth of reverse shoulder arthroplasty (RSA), it is becoming increasingly necessary to establish the most cost-effective methods for the procedure. The surgical approach is one factor that may influence the cost and outcome of RSA. The purpose of this study was to compare the clinical results of a subscapularis- and deltoid-sparing (SSCS) approach to a traditional deltopectoral (TDP) approach for RSA. The hypothesis was that the SSCS approach would be associated with decreased length of stay (LOS), equal complication rate, and better short-term outcomes compared to the TDP approach. A prospective evaluation was performed on patients undergoing RSA over a 2-year period. A deltopectoral incision was used followed by either an SSCS approach or a traditional tenotomy of the subscapularis (TDP). LOS, adverse events, physical therapy utilization, and patient satisfaction were collected in the 12 months following RSA. LOS was shorter with the SSCS approach compared to the TDP approach (from 8.2 ± 6.4 days to 15.2 ± 11.9 days; P = 0.04). At 3 months postoperative, the single assessment numeric evaluation score (80 ± 11% vs 70 ± 6%; P = 0.04) and active elevation (130 ± 22° vs 109 ± 24°; P = 0.01) were higher in the SSCS group. The SSCS approach resulted in a net cost savings of $5900 per patient. Postoperative physical therapy, pain levels, and patient satisfaction were comparable in both groups. No immediate intraoperative complications were noted. Using a SSCS approach is an option for patients requiring RSA. Overall LOS is minimized compared to a TDP approach with subscapularis tenotomy. The SSCS approach may provide substantial healthcare cost savings, without increasing complication rate or decreasing patient satisfaction.

Deficits in Glenohumeral Passive Range of Motion Increase Risk of Shoulder Injury in Professional Baseball Pitchers: A Prospective Study.

PubMed

Wilk, Kevin E; Macrina, Leonard C; Fleisig, Glenn S; Aune, Kyle T; Porterfield, Ron A; Harker, Paul; Evans, Timothy J; Andrews, James R

2015-10-01

Shoulder injuries from repetitive baseball pitching continue to be a serious, common problem. To determine whether passive range of motion of the glenohumeral joint was predictive of shoulder injury or shoulder surgery in professional baseball pitchers. Cohort study; Level of evidence, 2. Passive range of motion of the glenohumeral joint was assessed with a bubble goniometer during spring training for all major and minor league pitchers of a single professional baseball organization over a period of 8 successive seasons (2005-2012). Investigators performed a total of 505 examinations on 296 professional pitchers. Glenohumeral external and internal rotation was assessed with the pitcher supine and the arm abducted to 90° in the scapular plane with the scapula stabilized anteriorly at the coracoid process. Total rotation was defined as the sum of internal and external glenohumeral rotation. Passive shoulder flexion was measured with the pitcher supine and the lateral border of the scapula manually stabilized. After examination, shoulder injuries and injury durations were recorded by each pitcher's respective baseball organization and reported to the league as an injury transaction as each player was placed on the disabled list. Highly significant side-to-side differences were noted within subjects for each range of motion measurement. There were 75 shoulder injuries and 20 surgeries recorded among 51 pitchers, resulting in 5570 total days on the disabled list. Glenohumeral internal rotation deficit, total rotation deficit, and flexion deficit were not significantly related to shoulder injury or surgery. Pitchers with insufficient external rotation (<5° greater external rotation in the throwing shoulder) were 2.2 times more likely to be placed on the disabled list for a shoulder injury (P = .014; 95% CI, 1.2-4.1) and were 4.0 times more likely to require shoulder surgery (P = .009; 95% CI, 1.5-12.6). Insufficient shoulder external rotation on the throwing side increased the likelihood of shoulder injury and shoulder surgery. Sports medicine clinicians should be aware of these findings and develop a preventive plan that addresses this study's findings to reduce pitchers' risk of shoulder injury and surgery. © 2015 The Author(s).

Tendon transfer options about the shoulder in patients with brachial plexus injury.

PubMed

Elhassan, Bassem; Bishop, Allen T; Hartzler, Robert U; Shin, Alexander Y; Spinner, Robert J

2012-08-01

The purpose of this study was to evaluate the early outcome of shoulder tendon transfer in patients with brachial plexus injury and to determine the factors associated with favorable outcomes. Fifty-two patients with traumatic brachial plexus injury and a paralytic shoulder were included in the study. All patients were evaluated at a mean of nineteen months (range, twelve to twenty-eight months) postoperatively. Twelve patients had a C5-6 injury, twenty-two had a C5-7 injury, five had a C5-8 injury, and thirteen had a C5-T1 injury. Transfer of the lower portion of the trapezius muscle was performed either in isolation or as part of multiple tendon transfers to improve shoulder function. Additional muscles transferred included the middle and upper portions of the trapezius, levator scapulae, upper portion of the serratus anterior, teres major, latissimus dorsi, and pectoralis major. All patients had a stable shoulder postoperatively. Shoulder external rotation improved substantially in all patients from no external rotation (hand-on-belly position) to a mean of 20° (p = 0.001). Patients who underwent additional transfers had marginal improvement of shoulder flexion, from a mean of 10° preoperatively to 60° postoperatively, and of shoulder abduction, from a mean of 10° to 50° (p = 0.01 for each). Mean pain on a visual analog scale improved from 6 points preoperatively to 2 points postoperatively. The mean Disabilities of the Arm, Shoulder and Hand (DASH) score improved from 59 to 47 points (p = 0.001). The mean Subjective Shoulder Value improved from 5% to 40% (p = 0.001). Greater age, higher body mass index, and more extensive nerve injury were associated with a poorer DASH score in a multivariate analysis (p = 0.003). Tendon transfers about the shoulder can improve shoulder function in patients with brachial plexus injury resulting in a paralytic shoulder. Significant improvement of shoulder external rotation but only marginal improvements of shoulder abduction and flexion can be achieved. The outcome can be expected to be better in patients with less severe nerve injury.

Clavicle Chest Cage Angle Difference: Is It a Radiographic and Clinical Predictor of Postoperative Shoulder Imbalance in Lenke I Adolescent Idiopathic Scoliosis?

PubMed

Han, Xiao; Liu, Zhen; Qiu, Yong; Sha, Shifu; Yan, Huang; Jin, Mengran; Zhu, Zezhang

2016-09-01

A retrospective study. To evaluate the effect of preoperative clavicle chest cage angle difference (CCAD) on postoperative radiographic shoulder imbalance, cosmetic shoulder balance, patient's satisfaction, and surgeon's fulfillment in Lenke I adolescent idiopathic scoliosis (AIS). CCAD is a novel predictor of postoperative radiographic shoulder imbalance in AIS. However, radiographic shoulder balance does not always correspond to cosmetic shoulder balance. Forty-four Lenke I AIS patients treated with posterior spinal fusion with a minimum 2-year follow-up were analyzed. Shoulder height difference (SHD) and CCAD were measured on anteroposterior standing radiographs. The inner shoulder height (SHi) and the outer shoulder height (SHo) were measured using the patients' photographs. The patients' satisfaction and the surgeons' fulfillment were evaluated using a questionnaire. A receiver operative characteristic curve analysis was performed to explore the threshold values of preoperative CCAD in the prediction of the final follow-up radiographic shoulder imbalance, patients' satisfaction, and surgeons' fulfillment. At the final follow-up, the preoperative CCAD was significantly greater in patients with unbalanced shoulders (SHD ≥1 cm). For cosmetic shoulder balance at the final follow-up, there was no significant difference in preoperative CCAD between Group 1i (SHi ≥1 cm, n = 14) and Group 2i (SHi <1 cm, n = 30), and the preoperative CCAD was also similar between Group 1o (SHo ≥1 cm, n = 17) and Group 2o (SHo <1 cm, n = 27). For patients' satisfaction and surgeons' fulfillment, the preoperative CCAD was significantly greater in patients with unsatisfied outcomes. The threshold value of preoperative CCAD to predict the final follow-up radiographic shoulder imbalance, patients' satisfaction, and surgeons' fulfillment was 5.5°. CCAD is a good radiographic predictor for postoperative radiographic shoulder imbalance in Lenke I AIS patients. Moreover, it is also associated with the patients' satisfaction and surgeons' fulfillment postoperatively. However, CCAD cannot predict postoperative cosmetic shoulder balance. 4.

Bone density and anisotropy affect periprosthetic cement and bone stresses after anatomical glenoid replacement: A micro finite element analysis.

PubMed

Chevalier, Yan; Santos, Inês; Müller, Peter E; Pietschmann, Matthias F

2016-06-14

Glenoid loosening is still a main complication for shoulder arthroplasty. We hypothesize that cement and bone stresses potentially leading to fixation failure are related not only to glenohumeral conformity, fixation design or eccentric loading, but also to bone volume fraction, cortical thickness and degree of anisotropy in the glenoid. In this study, periprosthetic bone and cement stresses were computed with micro finite element models of the replaced glenoid depicting realistic bone microstructure. These models were used to quantify potential effects of bone microstructural parameters under loading conditions simulating different levels of glenohumeral conformity and eccentric loading simulating glenohumeral instability. Results show that peak cement stresses were achieved near the cement-bone interface in all loading schemes. Higher stresses within trabecular bone tissue and cement mantle were obtained within specimens of lower bone volume fraction and in regions of low anisotropy, increasing with decreasing glenohumeral conformity and reaching their maxima below the keeled design when the load is shifted superiorly. Our analyses confirm the combined influences of eccentric load shifts with reduced bone volume fraction and anisotropy on increasing periprosthetic stresses. They finally suggest that improving fixation of glenoid replacements must reduce internal cement and bone tissue stresses, in particular in glenoids of low bone density and heterogeneity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Arm lymphoedema and upper limb impairments in sentinel node-negative breast cancer patients: A one year follow-up study.

PubMed

De Groef, An; Van Kampen, Marijke; Tieto, Elena; Schönweger, Petra; Christiaens, Marie-Rose; Neven, Patrick; Geraerts, Inge; Gebruers, Nick; Devoogdt, Nele

2016-10-01

The aim of this study is (1) to investigate the prevalence rate of arm lymphedema, pain, impaired shoulder range of motion, strength and shoulder function one year after a sentinel lymph node biopsy (SLNB) for breast cancer and (2) to determine predictive factors for these complications. A longitudinal study was performed. One hundred patients with a sentinel-lymph node negative breast cancer were included. All patients were measured before surgery and one year after. Arm lymphedema was measured with the perimeter, pain with the Visual Analogue Scale, shoulder range of motion with an inclinometer, strength with a handheld dynamometer and shoulder function with the Disability of Arm, Shoulder and Hand questionnaire. Patient-, breast cancer- and treatment-related variables were recorded. One year after surgery 8% of sentinel node-negative breast cancer patients had developed arm lymphedema. Fifty percent of patients had pain, 30% had an impaired shoulder range of motion, 8% had a decreased handgrip strength and 49% had an impaired shoulder function. Pain, shoulder range of motion, strength and shoulder dysfunctions changed significantly over one year (p < 0.001). Higher Body Mass Index is a predictive variable for shoulder dysfunctions one year post-SLNB. Prevalence rate of lymphedema and other upper limb impairments may not be underestimated after SLNB. Pain, shoulder range of motion, handgrip strength and shoulder function change significantly up to one year compared to preoperative values in sentinel node-negative breast cancer patients. Copyright © 2016 Elsevier Ltd. All rights reserved.

Can we predict shoulder dystocia?

PubMed

Revicky, Vladimir; Mukhopadhyay, Sambit; Morris, Edward P; Nieto, Jose J

2012-02-01

To analyse the significance of risk factors and the possibility of prediction of shoulder dystocia. This was a retrospective cohort study. There were 9,767 vaginal deliveries at 37 and more weeks of gestation analysed during 2005-2007. Studied population included 234 deliveries complicated by shoulder dystocia. Shoulder dystocia was defined as a delivery that required additional obstetric manoeuvres to release the shoulders after gentle downward traction has failed. First, a univariate analysis was done to identify the factors that had a significant association with shoulder dystocia. Parity, age, gestation, induction of labour, epidural analgesia, birth weight, duration of second stage of labour and mode of delivery were studied factors. All factors were then combined in a multivariate logistic regression analysis. Adjusted odds ratios (Adj. OR) with 95% confidence intervals (CI) were calculated. The incidence of shoulder dystocia was 2.4% (234/9,767). Only mode of delivery and birth weight were independent risk factors for shoulder dystocia. Parity, age, gestation, induction of labour, epidural analgesia and duration of second stage of labour were not independent risk factors. Ventouse delivery increases the risk of shoulder dystocia almost 3 times, forceps delivery comparing to the ventouse delivery increases risk almost 3.4 times. Risk of shoulder dystocia is minimal with the birth weight of 3,000 g or less. It is difficult to foretell the exact birth weight and the mode of delivery, therefore occurrence of shoulder dystocia is highly unpredictable. Regular drills for shoulder dystocia and awareness of increased incidence with instrumental deliveries are important to reduce fetal and maternal morbidity and mortality.

Relationship between extrinsic factors and the acromio-humeral distance.

PubMed

Mackenzie, Tanya Anne; Herrington, Lee; Funk, Lenard; Horsley, Ian; Cools, Ann

2016-06-01

Maintenance of the subacromial space is important in impingement syndromes. Research exploring the correlation between biomechanical factors and the subacromial space would be beneficial. To establish if relationship exists between the independent variables of scapular rotation, shoulder internal rotation, shoulder external rotation, total arc of shoulder rotation, pectoralis minor length, thoracic curve, and shoulder activity level with the dependant variables: AHD in neutral, AHD in 60° arm abduction, and percentage reduction in AHD. Controlled laboratory study. Data from 72 male control shoulders (24.28years STD 6.81 years) and 186 elite sportsmen's shoulders (25.19 STD 5.17 years) were included in the analysis. The independent variables were quantified and real time ultrasound was used to measure the dependant variable acromio-humeral distance. Shoulder internal rotation and pectoralis minor length, explained 8% and 6% respectively of variance in acromio-humeral distance in neutral. Pectoralis minor length accounted for 4% of variance in 60° arm abduction. Total arc of rotation, shoulder external rotation range, and shoulder activity levels explained 9%, 15%, and 16%-29% of variance respectively in percentage reduction in acromio-humeral distance during arm abduction to 60°. Pectorals minor length, shoulder rotation ranges, total arc of shoulder rotation, and shoulder activity levels were found to have weak to moderate relationships with acromio-humeral distance. Existence and strength of relationship was population specific and dependent on arm position. Relationships only accounted for small variances in AHD indicating that in addition to these factors there are other factors involved in determining AHD. Copyright © 2016 Elsevier Ltd. All rights reserved.

Finite element models of the human shoulder complex: a review of their clinical implications and modelling techniques.

PubMed

Zheng, Manxu; Zou, Zhenmin; Bartolo, Paulo Jorge Da Silva; Peach, Chris; Ren, Lei

2017-02-01

The human shoulder is a complicated musculoskeletal structure and is a perfect compromise between mobility and stability. The objective of this paper is to provide a thorough review of previous finite element (FE) studies in biomechanics of the human shoulder complex. Those FE studies to investigate shoulder biomechanics have been reviewed according to the physiological and clinical problems addressed: glenohumeral joint stability, rotator cuff tears, joint capsular and labral defects and shoulder arthroplasty. The major findings, limitations, potential clinical applications and modelling techniques of those FE studies are critically discussed. The main challenges faced in order to accurately represent the realistic physiological functions of the shoulder mechanism in FE simulations involve (1) subject-specific representation of the anisotropic nonhomogeneous material properties of the shoulder tissues in both healthy and pathological conditions; (2) definition of boundary and loading conditions based on individualised physiological data; (3) more comprehensive modelling describing the whole shoulder complex including appropriate three-dimensional (3D) representation of all major shoulder hard tissues and soft tissues and their delicate interactions; (4) rigorous in vivo experimental validation of FE simulation results. Fully validated shoulder FE models would greatly enhance our understanding of the aetiology of shoulder disorders, and hence facilitate the development of more efficient clinical diagnoses, non-surgical and surgical treatments, as well as shoulder orthotics and prosthetics. © 2016 The Authors. International Journal for Numerical Methods in Biomedical Engineering published by John Wiley & Sons Ltd. © 2016 The Authors. International Journal for Numerical Methods in Biomedical Engineering published by John Wiley & Sons Ltd.

Six-week physical rehabilitation protocol for anterior shoulder dislocation in athletes

PubMed Central

Gaballah, Ahmed; Zeyada, Mohamed; Elgeidi, Adham; Bressel, Eadric

2017-01-01

Anterior shoulder dislocations are common in young athletes. The mechanism for the first or primary shoulder dislocation may involve a collision or a fall typically with the arm in an abducted and externally rotated position. The aim of this study was to design a physical rehabilitation program using the elastic band and resistive exercise to improve joint strength and range of motion in individuals diagnosed with a first-time shoulder dislocation. Twelve physically active males with a first-time acute shoulder dislocation were asked to volunteer. Participants began a physical rehabilitation program 2 weeks after the shoulder dislocation, which was confirmed by a referring physician. The rehabilitation program was 6 weeks in duration and required the participants to engage in progressive resistive loads/duration using elastic bands and weights 5 days per week. Pretest and posttest measures included shoulder strength and range of motion. All outcome measures were compared between the injured and uninjured shoulder, which served as the control condition in this study. There were statistically significant differences between the injured and uninjured shoulder for measures of strength and range of motion during pretests (P<0.01) but not post-tests (P<0.53). Finally, there were no differences between shoulders in regards to the volume measure suggesting that any changes in muscle atrophy or swelling were not detected. The physical rehabilitation program proposed in this study was effective at improving strength and range of motion in the injured shoulder as evidenced by the similarity in posttest values between the injured and uninjured shoulder. PMID:28702449

Cadaveric Study of the Articular Branches of the Shoulder Joint.

PubMed

Eckmann, Maxim S; Bickelhaupt, Brittany; Fehl, Jacob; Benfield, Jonathan A; Curley, Jonathan; Rahimi, Ohmid; Nagpal, Ameet S

This cadaveric study investigated the anatomic relationships of the articular branches of the suprascapular (SN), axillary (AN), and lateral pectoral nerves (LPN), which are potential targets for shoulder analgesia. Sixteen embalmed cadavers and 1 unembalmed cadaver, including 33 shoulders total, were dissected. Following dissections, fluoroscopic images were taken to propose an anatomical landmark to be used in shoulder articular branch blockade. Thirty-three shoulders from 17 total cadavers were studied. In a series of 16 shoulders, 16 (100%) of 16 had an intact SN branch innervating the posterior head of the humerus and shoulder capsule. Suprascapular sensory branches coursed laterally from the spinoglenoid notch then toward the glenohumeral joint capsule posteriorly. Axillary nerve articular branches innervated the posterolateral head of the humerus and shoulder capsule in the same 16 (100%) of 16 shoulders. The AN gave branches ascending circumferentially from the quadrangular space to the posterolateral humerus, deep to the deltoid, and inserting at the inferior portion of the posterior joint capsule. In 4 previously dissected and 17 distinct shoulders, intact LPNs could be identified in 14 (67%) of 21 specimens. Of these, 12 (86%) of 14 had articular branches innervating the anterior shoulder joint, and 14 (100%) of 14 LPN articular branches were adjacent to acromial branches of the thoracoacromial blood vessels over the superior aspect of the coracoid process. Articular branches from the SN, AN, and LPN were identified. Articular branches of the SN and AN insert into the capsule overlying the glenohumeral joint posteriorly. Articular branches of the LPN exist and innervate a portion of the anterior shoulder joint.

Propionibacterium Acnes Infection of a Metacarpophalangeal Joint Arthroplasty.

PubMed

Bacle, Guillaume; Sikora, Sheena K; Ek, Eugene T H

2017-05-01

Neglected and underestimated in the past, Propionibacterium acnes is currently the most prevalent organism associated with deep prosthetic infections around the shoulder. Surprisingly, it has never been reported as a cause of infection in the hand. Here we report a case of a late presentation of a P. acnes infection in a metacarpophalangeal joint replacement, resulting in chronic low-grade pain with movement. The patient underwent a 2-stage revision, with initial removal of the prosthesis. Positive cultures for P. acnes required 15 days of extended incubation. The patient subsequently had 6 weeks of oral antibiotics followed by a second-stage revision with a Silastic implant. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Downhole tool

DOEpatents

Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

2007-03-20

A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

[Isokinetic testing of the shoulder of handball players].

PubMed

Michael, J W-P; König, D P; Bertram, C; Hessling, U; Eysel, P

2005-09-01

Aim of the study was to evaluate an isokinetic profile testing handball players to describe muscular imbalance. 30 athletes (15 male and 15 female) were measured at the Cybex 6000 test-unit for concentric internal and external rotation. Both shoulders, throwing arm (dominant shoulder) and the opposite shoulder were tested by speeds at 60 degrees/s and 180 degrees/s. There were sex specific differences which are also found in other sports. But these contrary data are not useful to define effective training concepts for handball-players with shoulder problems. From our point of view isokinetic testing of the shoulder joint in handball players can not reach any sufficient result. From our point of view there is no reason for using isokinetic testing to evaluate shoulder problems.

Simultaneous concentration and purification through gradient deformation chromatography

NASA Technical Reports Server (NTRS)

Velayudhan, A.; Hendrickson, R. L.; Ladisch, M. R.; Mitchell, C. A. (Principal Investigator)

1995-01-01

Mobile-phase additives, commonly used to modulate absorbate retention in gradient elution chromatography, are usually assumed to be either linearly retained or unretained. Previous theoretical work from our laboratory has shown that these modulators, such as salts in ion-exchange and hydrophobic interaction chromatography and organic modifiers in reversed-phase chromatography, can absorb nonlinearly, giving rise to gradient deformation. Consequently, adsorbate peaks that elute in the vicinity of the head of the deformed gradient may exhibit unusual shapes, form shoulders, and/or be concentrated. These effects for a reversed-phase sorbent with aqueous acetonitrile (ACN) as the modulator are verified experimentally. Gradient deformation is demonstrated experimentally and agrees with simulations based on ACN isotherm parameters that are independently determined from batch equilibrium studies using the layer model. Unusual absorbate peak shapes were found experimentally for single-component injections of phenylalanine, similar to those calculated by the simulations. A binary mixture of tryptophan and phenylalanine is used to demonstrate simultaneous concentration and separation, again in agreement with simulations. The possibility of gradient deformation in ion-exchange and hydrophobic interaction chromatography is discussed.

Review of paved shoulders.

DOT National Transportation Integrated Search

1990-01-01

The objectives of this study were (1) to review the literature on paved shoulders, (2) to survey state departments of transportation on their use of paved shoulders on two laneroads, (3) to perform a cost analysis on paved shoulders, and (4) to draw ...

Somatic mosaicism caused by monoallelic reversion of a mutation in T cells of a patient with ADA-SCID and the effects of enzyme replacement therapy on the revertant phenotype.

PubMed

Moncada-Vélez, M; Vélez-Ortega, A; Orrego, J; Santisteban, I; Jagadeesh, J; Olivares, M; Olaya, N; Hershfield, M; Candotti, F; Franco, J

2011-11-01

Patients with adenosine deaminase (ADA) deficiency exhibit spontaneous and partial clinical remission associated with somatic reversion of inherited mutations. We report a child with severe combined immunodeficiency (T-B- SCID) due to ADA deficiency diagnosed at the age of 1 month, whose lymphocyte counts including CD4+ and CD8+ T and NK cells began to improve after several months with normalization of ADA activity in Peripheral blood lymphocytes (PBL), as a result of somatic mosaicism caused by monoallelic reversion of the causative mutation in the ADA gene. He was not eligible for haematopoietic stem cell transplantation (HSCT) or gene therapy (GT); therefore he was placed on enzyme replacement therapy (ERT) with bovine PEG-ADA. The follow-up of metabolic and immunologic responses to ERT included gradual improvement in ADA activity in erythrocytes and transient expansion of most lymphocyte subsets, followed by gradual stabilization of CD4+ and CD8+ T (with naïve phenotype) and NK cells, and sustained expansion of TCRγδ+ T cells. This was accompanied by the disappearance of the revertant T cells as shown by DNA sequencing from PBL. Although the patient's clinical condition improved marginally, he later developed a germinal cell tumour and eventually died at the age of 67 months from sepsis. This case adds to our current knowledge of spontaneous reversion of mutations in ADA deficiency and shows that the effects of the ERT may vary among these patients, suggesting that it could depend on the cell and type in which the somatic mosaicism is established upon reversion. © 2011 The Authors. Scandinavian Journal of Immunology © 2011 Blackwell Publishing Ltd.

Somatic mosaicism due to monoallelic reversion of a mutation in T cells of an ADA-SCID patient and the effects of enzyme replacement therapy on the revertant phenotype

PubMed Central

Moncada-Vélez, Marcela; Vélez-Ortega, Alejandra C.; Orrego, Julio C.; Santisteban, Inés; Jagadeesh, Jayashree; Olivares, Margarita; Olaya, Natalia; Hershfield, Michael S.; Candotti, Fabio; Franco, Jose L.

2011-01-01

Patients with adenosine deaminase (ADA) deficiency exhibit spontaneous and partial clinical remission associated with somatic reversion of inherited mutations. We report a child with severe combined immunodeficiency (T-B-NK- SCID) due to ADA deficiency diagnosed at the age of 1 month, whose lymphocyte counts including CD4+ and CD8+ T and NK cells began to improve after several months with normalization of ADA activity in PBL, as a result of somatic mosaicism due to monoallelic reversion of the causative mutation in the ADA gene. Our patient was not eligible for hematopoietic stem cell transplantation (HSCT) or gene therapy (GT); therefore enzyme replacement therapy (ERT) with bovine PEG-ADA was initiated. The follow up of metabolic and immunologic responses to ERT included gradual improvement in ADA activity in erythrocytes and transient expansion of most lymphocyte subsets, followed by gradual stabilization of CD4+ and CD8+ T (with naïve phenotype) and NK cells, with sustained expansion of TCRγδ+ T cells. This was accompanied by disappearance of the revertant T cells as shown by DNA sequencing from PBL. Although the patient’s clinical condition improved marginally, he later developed a germinal cell tumor and eventually died at the age of 67 months from sepsis. This case adds to our current knowledge of spontaneous reversion of mutations in ADA deficiency and shows that the effects of the ERT may vary among these patients, suggesting that it could depend on the cell and type in which the somatic mosaicism is established upon reversion. PMID:21671975

Ultrasonographic evaluation of the canine shoulder.

PubMed

Long, C D; Nyland, T G

1999-01-01

The aim of this study was to determine the normal ultrasonographic anatomy of the canine shoulder. Fourteen shoulders from 7 clinically normal mid-sized dogs were radiographed and imaged using high frequency ultrasound. Each shoulder was isolated postmortem, and the ultrasonographic and gross anatomy was studied during dissection. The ultrasonographic appearance of the shoulder specimens was similar to that found in the live dogs. Twenty-four shoulders isolated postmortem from 12 variably sized dogs were also used to characterize the normal ultrasound anatomy over a range of sizes. Important anatomic structures that could be consistently evaluated were the biceps tendon and bursa, the bicipital groove surface, the supraspinatous tendon, the infraspinatous tendon, the teres minor tendon, and the caudal aspect of the humeral head. Results of ultrasonographic examination of 4 dogs with shoulder lameness are described to illustrate some applications of canine shoulder ultrasonography in the evaluation of the canine shoulder. In these dogs, ultrasound was a valuable tool to evaluate effusion and synovial proliferation within the bicipital bursa, supraspinatous and biceps tendinitis, biceps tendon strain, and dystrophic calcification.

[Prediction, prevention and management of shoulder dystocia].

PubMed

Csorba, Roland

2012-05-20

Shoulder dystocia is one of the most tragic, fatal and unexpected obstetrical events, which is mostly unpredictable and unpreventable. This clinical picture is defined as a delivery that requires additional obstetric maneuvers to release the shoulders after gentle downward traction has failed. Shoulder dystocia occurs when the fetal shoulder impacts on the maternal symphysis or sacral promontory. The incidence of shoulder dystocia is 0.2-0.6%. High perinatal mortality and morbidity is associated with the condition, even when it is managed appropriately. Obstetricians should be aware of the existing risk factors, but should always be alert to the possibility of shoulder dystocia in all labors. Maternal morbidity is also increased, particularly postpartum hemorrhage, rupture of the uterus, injury of the bladder, urethra and the bowels and fourth-degree perineal tears. Complications of the newborn include asphyxia, perinatal mortality, fracture of the clavicula and the humerus. Brachial plexus injuries are one of the most important fetal complications of shoulder dystocia, complicating 4-16% of such deliveries. The purpose of this article is to review the current evidence regarding the possible prediction, prevention and management of shoulder dystocia.

Shoulder Problems in Athletes.

ERIC Educational Resources Information Center

Clancy, William G., Jr.

A description is given of typical sport-related injuries to the shoulder area. These include: (1) brachial plexus injuries; (2) peripheral nerve injuries about the shoulder; (3) acromioclavicular injuries; (4) sternoclavicular injuries; (5) shoulder dislocations; (6) recurrent traumatic subluxation/dislocations; and (7) overuse injuries.…

Magnetic Resonance Imaging and Arthroscopic Correlation in Shoulder Instability.

PubMed

Knapik, Derrick M; Voos, James E

2017-12-01

The shoulder is the most inherently unstable joint in the body, prone to high rates of anterior dislocations with subsequent injuries to soft tissue and bony stabilizing structures, resulting in recurrent shoulder instability. Advanced imaging utilizing magnetic resonance (MR) imaging and MR arthrography allows for thorough evaluation of lesions present in the unstable shoulder and is critical for preoperative planning. Arthroscopic shoulder stabilization in the appropriately selected patient can help restore stability and function. This review highlights correlations between MR imaging and arthroscopy of the most commonly reported soft tissue and bony injuries present in patients with shoulder instability.

Reflex muscle contraction in anterior shoulder instability.

PubMed

Wallace, D A; Beard, D J; Gill, R H; Eng, B; Carr, A J

1997-01-01

Reduced proprioception may contribute to recurrent anterior shoulder instability. Twelve patients with unilateral shoulder instability were investigated for evidence of deficient proprioception with an activated pneumatic cylinder and surface electromyography electrodes; the contralateral normal shoulder was used as a control. The latency between onset of movement and the detection of muscle contraction was used as an index of proprioception. No significant difference in muscle contraction latency was detected between the stable and unstable shoulders, suggesting that there was no significant defect in muscular reflex activity. This study does not support the use proprioception-enhancing physiotherapy in the treatment of posttraumatic anterior shoulder instability.

Presentation of frozen shoulder among diabetic and non-diabetic patients.

PubMed

Uddin, Mohammad Moin; Khan, Aminuddin A; Haig, Andrew J; Uddin, Mohammad Kafil

2014-12-01

The literature is inconsistent regarding the level of pain and disability in frozen shoulder patients with or without diabetes mellitus. The aim of this study is to evaluate some demographic features of frozen shoulder patients and to look into the disparity of information by comparing the level of pain and disability due to frozen shoulder between diabetic and non-diabetic people. This is a prospective comparative study. People with frozen shoulder attending an outpatient department were selected by consecutive sampling. Disability levels were assessed by the Shoulder Pain & Disability Index (SPADI). Means of pain and disability scores were compared using unpaired t-test. Among 140 persons with shoulder pain 99 (71.4%) had frozen shoulder. From the participating 40 frozen shoulder patients, 26 (65%) were males and 14 (35%) were females. Seventeen participants (42.5%) were diabetic, two (5%) had impaired glucose tolerance and 21 (52.5%) patients were non-diabetic. Mean disability scores (SPADI) were 51 ± 15.5 in diabetic and 57 ± 16 in non-diabetic persons. The differences in pain and disability level were not statistically significance (respectively, p = 0.24 and p = 0.13 at 95% confidence interval). No difference was found in level of pain and disability level between frozen shoulder patients with and without diabetes.

Ultrasonographic Findings of the Shoulder in Patients with Rheumatoid Arthritis and Comparison with Physical Examination

PubMed Central

Kim, Su Ho; Seo, Young-Il

2007-01-01

The objectives of this study were: 1) to identify the ultrasonographic (US) abnormalities and 2) to compare the findings of physical examination with US findings in rheumatoid arthritis (RA) patients with shoulder pain. We studied 30 RA patients. Physical examination was performed systemically as follows: 1) area of tenderness; 2) range of passive and active shoulder motion; 3) impingement tests; 4) maneuvers for determining the location of the tendon lesions. US investigations included the biceps, the supraspinatus, infraspinatus, and subscapularis tendons; the subacromial-subdeltoid bursa; and the glenohumeral and acromioclavicular joints. Thirty RA patients with 35 painful and 25 non-painful shoulders were examined. The range of motion affected the most by shoulder pain was abduction. The most frequent US finding of shoulder joint was effusion in the long head of the biceps tendon. Among the rotator cuff tendons, subscapularis was the most frequently involved. Tendon tear was also common among non-painful shoulders. Physical examination used for the diagnosis of shoulder pain had low sensitivity and specificity for detecting abnormalities in the rheumatoid shoulder joint. In conclusion, US abnormalities showed frequent tendon tears in our RA patients. Physical examination had low sensitivity and specificity for detecting rotator cuff tear in the rheumatoid shoulder joint. PMID:17728506

Propionibacterium acnes infection in shoulder arthroscopy patients with postoperative pain.

PubMed

Horneff, John G; Hsu, Jason E; Voleti, Pramod B; O'Donnell, Judith; Huffman, G Russell

2015-06-01

Recent studies have identified Propionibacterium acnes as the causal organism in an increasing number of postoperative shoulder infections. Most reports have found a high rate of P acnes infection after open surgery, particularly shoulder arthroplasty. However, there are limited data regarding P acnes infections after shoulder arthroscopy. We prospectively collected data on all shoulder arthroscopies performed by the senior author from January 1, 2009, until April 1, 2013. Cultures were taken in all revision shoulder arthroscopy cases performed for pain, stiffness, or weakness. In addition, 2 cultures were taken from each of a cohort of 32 primary shoulder arthroscopy cases without concern for infection to determine the false-positive rate. A total of 1,591 shoulder arthroscopies were performed during this period, 68 (4.3%) of which were revision procedures performed for pain, stiffness, or weakness. A total of 20 revision arthroscopies (29.4%) had positive culture findings, and 16 (23.5%) were positive for P acnes. In the control group, 1 patient (3.2%) had P acnes growth. The rate of P acnes infection in patients undergoing revision shoulder arthroscopy is higher than previously published and should be considered in cases characterized by refractory postoperative pain and stiffness. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Experimental research on safety impacts of the inside shoulder based on driving simulation.

PubMed

Zhao, Xiaohua; Ding, Han; Wu, Yiping; Ma, Jianming; Zhong, Liande

2015-03-01

Statistical data shows that single-vehicle crashes account for half of all traffic crashes on expressways in China, and previous research has indicated that main contributing factors were related to whether and how the inside shoulder was paved. The inside shoulder provides space for drivers to make evasive maneuvers and accommodate driver errors. However, lower-cost construction solutions in China have resulted in the design of numerous urban expressway segments that lack inside shoulders. This paper has two objectives. The first is to reveal the safety impacts of inside shoulders on urban expressways by driving simulator experiment. The second objective is to propose optimal range and recommended value of inside shoulder width for designing inside shoulders of urban expressways. The empirical data, including subjects' eye movement data, heart rate (HR) and the lateral position of vehicles, were collected in a driving simulator. The data were analyzed to evaluate the safety impacts of the inside shoulder. The results have revealed that the inside shoulder has an impact on drivers' visual perception, behaviors, and psychology; in particular, it has a significant effect on vehicle operations. In addition, this paper recommends the desired and optimal inside shoulder widths for eight-lane, two-way divided expressways. Copyright © 2014 Elsevier Ltd. All rights reserved.

Exploring the Use of Educational Material About Shoulder Dysfunction: A Quality Improvement Project in People With Amyotrophic Lateral Sclerosis.

PubMed

Burke, Katherine; Ellrodt, Amy Swartz; Levine, Jason; Adams, Taylor; Allis, Rebecca; Macmurdie, Ian; Paganoni, Sabrina

2018-05-01

Shoulder pain is a common secondary complication of amyotrophic lateral sclerosis (ALS) that can contribute to functional decline and decreased participation in daily activities. The purpose of this study was to assess the effectiveness of an educational brochure aimed at improving knowledge regarding shoulder pain and dysfunction in people with ALS. Participants completed a preintervention survey with questions regarding their knowledge of how ALS may affect their shoulders. After completing the presurvey, they were mailed a brochure that described shoulder health and range of motion and stretching exercises. Four weeks after receiving the brochure, participants were then asked to determine the effectiveness of the educational materials in terms of impact on shoulder-related knowledge and self-efficacy with regard to prevention of shoulder pain and dysfunction. More than 50% of participants reported pain, decreased range of motion, or weakness in at least one shoulder since being diagnosed with ALS. All participants were interested in receiving educational materials, and all agreed that the brochure was easy to interpret and understand, with most (87%) reporting that it was helpful. Educational brochures are one strategy to improve awareness about shoulder health and to educate patients with ALS about exercises that may help reduce shoulder pain and dysfunction.

Shoulder pain among high-level volleyball players and preseason features.

PubMed

Forthomme, Benedicte; Wieczorek, Valerie; Frisch, Anne; Crielaard, Jean-Michel; Croisier, Jean-Louis

2013-10-01

The main goal of this prospective study was to identify the most significant intrinsic risk factors for shoulder pain by measuring strength developed by shoulder rotators and by carrying out various morphostatic assessments. Sixty-six players (mean ± SD age = 24 ± 5 yr) were recruited from nine volleyball teams from the first and second divisions (34 men and 32 women) to participate in the study. Before the start of the volleyball season, all the participants completed a preseason questionnaire and underwent both a bilateral isokinetic evaluation of the shoulders and morphostatic measurements. During the subsequent 6 months of the competition period, the players reported through a weekly questionnaire any shoulder pain experienced. During the ongoing season, 23% (15 of 66 players) of the volleyball players experienced dominant shoulder pain. Interestingly, participants who reported a history of dominant shoulder pain were found to have nine times higher risk of suffering further pain in their dominant shoulder. The eccentric maximal strength developed by the internal and external rotators was found to represent a protective factor in the volleyball players (respective odds ratios = 0.946, P = 0.01 and 0.94, P = 0.05). No risk factors were found among the shoulder morphostatic measurements. In our study, the evaluation of shoulder rotator muscle strength through isokinetic assessment, especially eccentric mode, appeared to be the most contributing parameter to identify risk factors for shoulder pain. This evaluation should allow to better identify players at risk.

Epidemiology of shoulder and elbow pain in youth baseball players.

PubMed

Matsuura, Tetsuya; Suzue, Naoto; Iwame, Toshiyuki; Arisawa, Kokichi; Fukuta, Shoji; Sairyo, Koichi

2016-01-01

There are relatively few published epidemiological studies examining the differences in the risk of shoulder and elbow pain in young baseball players. The purpose of this study was to investigate risk factors for shoulder and elbow pain in child and adolescent baseball players. A total of 1563 players aged 7 to 12 years participated in this investigation. Subjects were asked whether they had experienced episodes of shoulder or elbow pain. We investigated the following risk factors for shoulder and elbow pain: age, position, years of baseball experience, and training hours per week. Data from the groups with and without shoulder and elbow pain were analyzed using multivariate logistic regression models. Among the 1563 participants, 15.9% and 29.2% reported episodes of shoulder and elbow pain, respectively. Multivariate analysis showed that shoulder pain was associated with age 10, 11, and 12 years, and that elbow pain was associated with age 10, 11, and 12 years, playing catcher, and >2 years of baseball experience. Training hours per week were not associated with either shoulder or elbow pain. In over 1000 baseball players aged 7 to 12 years, 15.9% reported episodes of shoulder pain, while 29.2% reported elbow pain in the throwing arm. The associated risk factors were different for each type of pain. Shoulder pain was associated with increased age while elbow pain was associated with increased age, increased years of baseball experience, and playing catcher.

Bicycle-Related Shoulder Injuries: Etiology and the Need for Protective Gear.

PubMed

Goldstein, Yariv; Dolkart, Oleg; Kaufman, Ehud; Amar, Eyal; Sharfman, Zachary T; Rath, Ehud; Mozes, Gavriel; Maman, Eran

2016-01-01

The popularity of bicycle riding for recreation, exercise and transportation has grown enormously in recent years, which has led to an increased incidence of bicycle-related injuries. While these injuries involve mainly the musculoskeletal system, data on shoulder-specific injuries incurred while bike riding are lacking. Classifying these shoulder injuries may provide insight and assistance in the creation and implementation of effective protective gear and measures. To investigate the types and mechanisms of shoulder injuries among cyclists. This study retrospectively examined all cyclists who incurred shoulder injuries while riding and were admitted to the emergency department and shoulder clinic between January 2008 and November 2013. The study included 157 subjects with various bicycle-related shoulder injuries treated with either conservative or surgical measures. Eighty-four percent of injuries were caused by a direct blow to the shoulder, 7% by falling on an outstretched hand, 6% were traction injuries, and 3% were due to hyperabduction. Nine different clinical types of injury were observed; the most common injuries were clavicle fractures (32%), followed by acromioclavicular joint dislocations (22%), rotator cuff tears (22%), and humeral fractures (8%). Fifty-one percent of subjects were managed with conservative care and the remaining patients required surgical interventions. Shoulder injuries incurred while riding a bicycle span the entire spectrum of shoulder injuries and often result in debilitating conditions. Although the use of helmets is increasing, there is currently no effective protective gear or measures to prevent riders from suffering shoulder injuries.

Cortical activation pattern during shoulder simple versus vibration exercises: a functional near infrared spectroscopy study.

PubMed

Jang, Sung Ho; Yeo, Sang Seok; Lee, Seung Hyun; Jin, Sang Hyun; Lee, Mi Young

2017-08-01

To date, the cortical effect of exercise has not been fully elucidated. Using the functional near infrared spectroscopy, we attempted to compare the cortical effect between shoulder vibration exercise and shoulder simple exercise. Eight healthy subjects were recruited for this study. Two different exercise tasks (shoulder vibration exercise using the flexible pole and shoulder simple exercise) were performed using a block paradigm. We measured the values of oxygenated hemoglobin in the four regions of interest: the primary sensory-motor cortex (SM1 total, arm somatotopy, and leg and trunk somatotopy), the premotor cortex, the supplementary motor area, and the prefrontal cortex. During shoulder vibration exercise and shoulder simple exercise, cortical activation was observed in SM1 (total, arm somatotopy, and leg and trunk somatotopy), premotor cortex, supplementary motor area, and prefrontal cortex. Higher oxygenated hemoglobin values were also observed in the areas of arm somatotopy of SM1 compared with those of other regions of interest. However, no significant difference in the arm somatotopy of SM1 was observed between the two exercises. By contrast, in the leg and trunk somatotopy of SM1, shoulder vibration exercise led to a significantly higher oxy-hemoglobin value than shoulder simple exercise. These two exercises may result in cortical activation effects for the motor areas relevant to the shoulder exercise, especially in the arm somatotopy of SM1. However, shoulder vibration exercise has an additional cortical activation effect for the leg and trunk somatotopy of SM1.

The presence and influence of posterior capsule tightness on different shoulder problems.

PubMed

Duzgun, Irem; Turgut, Elif; Çinar-Medeni, Özge; Kafa, Nihan; Tuna, Zeynep; Elbasan, Bulent; Oskay, Deran

2017-01-01

In the literature it has been shown that posterior capsule flexibility is a precursor to shoulder problems. However, no study thus far has shown the influence of the flexibility of posterior capsule in different shoulder pathologies. This study set about to compare the role of posterior capsule tightness in different shoulder problems. One-hundred-twenty-five patients diagnosed with shoulder subacromial impingement syndrome (n= 52), partial rotator cuff tear (n= 31) or frozen shoulder (n= 42) and 30 asymptomatic peers participated in the study. Horizontal adduction was assessed in side-lying position for posterior capsule tightness. Pain was measured via the visual analogue scale and shoulder range of motion and active total elevation was assessed with goniometer. Hand behind the back (HBB) test was assessed the active internal rotation by measuring the distance between T5 and the thumb. It was found that the affected side of the posterior capsules of the patients with subacromial impingement syndrome (p< 0.001), partial rotator cuff tear (p< 0.001) and frozen shoulder (p< 0.001) was stiffer than their healthy side. There were significant differences among groups in the level of tightness in the posterior capsule between the affected and the healthy sides (p< 0.001). All range of motion of the shoulder including HBB test and the posterior capsule tightness of the affected side are found to be correlated (p< 0.05). This study emphasized that the posterior capsule's susceptibility to tightness is most evident in frozen shoulder among different shoulder problems.

Is neck tilt and shoulder imbalance the same phenomenon? A prospective analysis of 89 adolescent idiopathic scoliosis patients (Lenke type 1 and 2).

PubMed

Kwan, Mun Keong; Wong, Kai Ann; Lee, Chee Kean; Chan, Chris Yin Wei

2016-02-01

To introduce a new clinical neck tilt grading and to investigate clinically and radiologically whether neck tilt and shoulder imbalance is the same phenomenon in AIS patients. 89 AIS Lenke 1 and 2 cases were assessed prospectively using the new clinical neck tilt grading. Shoulder imbalance and neck tilt were correlated with coracoid height difference (CHD), clavicle\\rib intersection distance (CRID), clavicle angle (CA), radiographic shoulder height (RSH), T1 tilt and cervical axis. Mean age was 17.2 ± 3.8 years old. 66.3 % were Lenke type 1 and 33.7 % were type 2 curves. Strong intraobserver (0.79) and interobserver (0.75) agreement of the clinical neck tilt grading was noted. No significant correlation was observed between clinical neck tilt and shoulder imbalance (0.936). 56.3 % of grade 3 neck tilt, 50.0 % grade 2 neck tilt patients had grade 0 shoulder imbalance. In patients with grade 2 shoulder imbalance, 42.9 % had grade 0, 35.7 % grade 1, 14.3 % grade 2 and only 7.1 % had grade 3 neck tilt. CHD, CRID, CA and RSH correlated with shoulder imbalance. T1 tilt and cervical axis measurements correlated with neck tilt. In conclusion, neck tilt is distinct from shoulder imbalance. Clinical neck tilt has poor correlation with clinical shoulder imbalance. Clinical neck tilt grading correlated with cervical axis and T1 tilt whereas clinical shoulder grading correlated with CHD, RSH CRID and CA.

Functional shoulder ratios with high velocities of shoulder internal rotation are most sensitive to determine shoulder rotation torque imbalance: a cross-sectional study with elite handball players and controls.

PubMed

Castro, Marcelo Peduzzi de; Fonseca, Pedro; Morais, Sara Tribuzi; Borgonovo-Santos, Márcio; Coelho, Eduardo Filipe Cruz; Ribeiro, Daniel Cury; Vilas-Boas, João Paulo

2017-12-04

The aim of the present study was to determine which approach to calculating shoulder ratios is the most sensitive for determining shoulder torque imbalance in handball players. Twenty-six participants (handball athletes, n = 13; healthy controls, n = 13) performed isokinetic concentric and eccentric shoulder internal rotation (IR) and external rotation (ER) assessment at 60, 180 and 300°/s. We used eight approaches to calculating shoulder ratios: four concentric (i.e. concentric ER torque divided by concentric IR torque), and four functional (i.e. eccentric ER torque divided by concentric IR torque) at the velocities of 60, 180 and 300°/s for both IR and ER, and combining 60°/s of ER and 300°/s of IR. A three factorial ANOVA (factors: shoulder ratios, upper limb sides, and groups) along with Tukey's post-hoc analysis, and effect sizes were calculated. The findings suggested the functional shoulder ratio combining 60°/s of ER and 300°/s of IR is the most sensitive to detect differences between upper limbs for handball players, and between players and controls for the dominant side. The functional shoulder ratio combining 60°/s of ER with 300°/s of IR seems to present advantages over the other approaches for identifying upper limb asymmetries and differences in shoulder torque balance related to throwing.

Treatment of myofascial trigger points in common shoulder disorders by physical therapy: a randomized controlled trial [ISRCTN75722066].

PubMed

Bron, Carel; Wensing, Michel; Franssen, Jo Lm; Oostendorp, Rob Ab

2007-11-05

Shoulder disorders are a common health problem in western societies. Several treatment protocols have been developed for the clinical management of persons with shoulder pain. However available evidence does not support any protocol as being superior over others. Systematic reviews provide some evidence that certain physical therapy interventions (i.e. supervised exercises and mobilisation) are effective in particular shoulder disorders (i.e. rotator cuff disorders, mixed shoulder disorders and adhesive capsulitis), but there is an ongoing need for high quality trials of physical therapy interventions. Usually, physical therapy consists of active exercises intended to strengthen the shoulder muscles as stabilizers of the glenohumeral joint or perform mobilisations to improve restricted mobility of the glenohumeral or adjacent joints (shoulder girdle). It is generally accepted that a-traumatic shoulder problems are the result of impingement of the subacromial structures, such as the bursa or rotator cuff tendons. Myofascial trigger points (MTrPs) in shoulder muscles may also lead to a complex of symptoms that are often seen in patients diagnosed with subacromial impingement or rotator cuff tendinopathy. Little is known about the treatment of MTrPs in patients with shoulder disorders.The primary aim of this study is to investigate whether physical therapy modalities to inactivate MTrPs can reduce symptoms and improve shoulder function in daily activities in a population of chronic a-traumatic shoulder patients when compared to a wait-and-see strategy. In addition we investigate the recurrence rate during a one-year-follow-up period. This paper presents the design for a randomized controlled trial to be conducted between September 2007 - September 2008, evaluating the effectiveness of a physical therapy treatment for non-traumatic shoulder complaints. One hundred subjects are included in this study. All subjects have unilateral shoulder pain for at least six months and are referred to a physical therapy practice specialized in musculoskeletal disorders of the neck-, shoulder-, and arm. After the initial assessment patients are randomly assigned to either an intervention group or a control-group (wait and see). The primary outcome measure is the overall score of the Dutch language version of the DASH (Disabilities of Arm, Shoulder and Hand) questionnaire. Since there is only little evidence for the efficacy of physical therapy interventions in certain shoulder disorders, there is a need for further research. We found only a few studies examining the efficacy of MTrP therapy for shoulder disorders. Therefore we will perform a randomised clinical trial of the effect of physical therapy interventions aimed to inactivate MTrPs, on pain and impairment in shoulder function in a population of chronic a-traumatic shoulder patients. We opted for an intervention strategy that best reflects daily practice. Manual high velocity thrust techniques and dry-needling are excluded. Because in most physical therapy interventions, blinding of the patient and the therapist is not possible, we will perform a randomised, controlled and observer-blinded study. This randomized clinical trial is registered at current controlled trials ISRCTN75722066.

Shoulder arthroplasty options in young (<50 years old) patients: review of current concepts.

PubMed

Johnson, Michael H; Paxton, E Scott; Green, Andrew

2015-02-01

Prosthetic shoulder arthroplasty provides excellent pain relief and functional restoration for patients with glenohumeral arthritis, but concerns of survivorship have limited its use in younger patients. Despite general reports of high long-term survivorship, implant failure and functional deterioration after total shoulder arthroplasty are major concerns in the management of younger patients. In addition to having a longer life expectancy, younger patients also tend to be more active and can be expected to place greater demands on their shoulder arthroplasty. Alternative strategies have been developed and used for shoulder arthroplasty in younger patients. This manuscript reviews current concepts of shoulder arthroplasty in young patients. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

A COMPARATIVE STUDY OF PASSIVE SHOULDER ROTATION RANGE OF MOTION, ISOMETRIC ROTATION STRENGTH AND SERVE SPEED BETWEEN ELITE TENNIS PLAYERS WITH AND WITHOUT HISTORY OF SHOULDER PAIN

PubMed Central

Moreno-Pérez, V.; Elvira, JLL.; Fernandez-Fernandez, J.; Vera-Garcia, FJ.

2018-01-01

Background Glenohumeral internal rotation deficit and external rotation strength have been associated with the development of shoulder pain in overhead athletes. Objective To examine the bilateral passive shoulder rotational range of motion (ROM), the isometric rotational strength and unilateral serve speed in elite tennis players with and without shoulder pain history (PH and NPH, respectively) and compare between dominant and non-dominant limbs and between groups. Study Design Cohort study. Methods Fifty-eight elite tennis players were distributed into the PH group (n = 20) and the NPH group (n = 38). Serve velocity, dominant and non-dominant passive shoulder external and internal rotation (ER and IR) ROM, total arc of motion (TAM: the sum of IR and ER ROM), ER and IR isometric strength, bilateral deficits and ER/IR strength ratio were measured in both groups. Questionnaires were administered in order to classify characteristics of shoulder pain. Results The dominant shoulder showed significantly reduced IR ROM and TAM, and increased ER ROM compared to the non-dominant shoulder in both groups. Isometric ER strength and ER/IR strength ratio were significantly lower in the dominant shoulder in the PH group when compared with the NPH group. No significant differences between groups were found for serve speed. Conclusion These data show specific adaptations in the IR, TAM and ER ROM in the dominant shoulder in both groups. Isometric ER muscle weakness and ER/IR strength ratio deficit appear to be associated with history of shoulder injuries in elite tennis players. It would be advisable for clinicians to use the present information to design injury prevention programs. Level of evidence 2 PMID:29484240

A COMPARATIVE STUDY OF PASSIVE SHOULDER ROTATION RANGE OF MOTION, ISOMETRIC ROTATION STRENGTH AND SERVE SPEED BETWEEN ELITE TENNIS PLAYERS WITH AND WITHOUT HISTORY OF SHOULDER PAIN.

PubMed

Moreno-Pérez, V; Elvira, Jll; Fernandez-Fernandez, J; Vera-Garcia, F J

2018-02-01

Glenohumeral internal rotation deficit and external rotation strength have been associated with the development of shoulder pain in overhead athletes. To examine the bilateral passive shoulder rotational range of motion (ROM), the isometric rotational strength and unilateral serve speed in elite tennis players with and without shoulder pain history (PH and NPH, respectively) and compare between dominant and non-dominant limbs and between groups. Cohort study. Fifty-eight elite tennis players were distributed into the PH group (n = 20) and the NPH group (n = 38). Serve velocity, dominant and non-dominant passive shoulder external and internal rotation (ER and IR) ROM, total arc of motion (TAM: the sum of IR and ER ROM), ER and IR isometric strength, bilateral deficits and ER/IR strength ratio were measured in both groups. Questionnaires were administered in order to classify characteristics of shoulder pain. The dominant shoulder showed significantly reduced IR ROM and TAM, and increased ER ROM compared to the non-dominant shoulder in both groups. Isometric ER strength and ER/IR strength ratio were significantly lower in the dominant shoulder in the PH group when compared with the NPH group. No significant differences between groups were found for serve speed. These data show specific adaptations in the IR, TAM and ER ROM in the dominant shoulder in both groups. Isometric ER muscle weakness and ER/IR strength ratio deficit appear to be associated with history of shoulder injuries in elite tennis players. It would be advisable for clinicians to use the present information to design injury prevention programs. 2.

Subjective and objective outcome after revision arthroscopic stabilization for recurrent anterior instability versus initial shoulder stabilization.

PubMed

Krueger, David; Kraus, Natascha; Pauly, Stephan; Chen, Jianhai; Scheibel, Markus

2011-01-01

The value of arthroscopic revision shoulder stabilization after failed instability repair is still a matter of debate. Arthroscopic revision shoulder stabilization using suture anchors provides equivalent subjective and objective results compared with initial arthroscopic instability repair. Cohort study; Level of evidence, 3. Twenty consecutive patients who underwent arthroscopic revision shoulder stabilization using suture anchors (group 2) were matched for age, gender, and handedness (dominant or nondominant) with 20 patients who had initial arthroscopic instability repair using the same technique (group 1). At the time of follow-up, a complete physical examination of both shoulders and evaluation with the Rowe score, Walch-Duplay score, Melbourne Instability Shoulder Score, Western Ontario Shoulder Instability Index, and the Subjective Shoulder Value were performed. In addition, standard radiographs (true AP and axillary views) were taken to evaluate signs of osteoarthritis. After a minimum follow-up of 24 months, no recurrent dislocations were observed in either group. The apprehension sign was positive in 2 cases of revision surgery (0 vs 2; P > .05). No significant differences in the Rowe score (89 vs 81.8 points) were found between groups 1 and 2 (P > .05). However, group 2 revealed significantly lower scores in the Walch-Duplay score (85.3 vs 75.5 points), Melbourne Instability Shoulder Score (90.2 vs 73.7 points), Western Ontario Shoulder Instability Index (89.8% vs 68.9%), and Subjective Shoulder Value (91.8% vs 69.2%) (P < .05). Signs of instability arthropathy were found more often in patients with arthroscopic revision surgery (2 vs 5; P > .05). Arthroscopic revision shoulder stabilization is associated with a lower subjective outcome compared with initial arthroscopic stabilization. The objective results found in this study may overestimate the clinical outcome in this patient population.

Effects of 6-week sling-based training of the external-rotator muscles on the shoulder profile in elite female high school handball players.

PubMed

Genevois, Cyril; Berthier, Philippe; Guidou, Vincent; Muller, Franck; Thiebault, Boris; Rogowski, Isabelle

2014-11-01

In women's handball, the large numbers of throws and passes make the shoulder region vulnerable to overuse injuries. Repetitive throwing motions generate imbalance between shoulder internal- and external-rotator muscles. It has not yet been established whether sling-based training can improve shoulder external-rotator muscle strength. This study investigated the effectiveness of a 6-wk strengthening program in improving shoulder functional profile in elite female high school handball players. Crossover study. National elite handball training center. 25 elite female high school handball players. The program, completed twice per week for 6 wk, included sling-based strengthening exercises using a suspension trainer for external rotation with scapular retraction and scapular retraction alone. Maximal shoulder external- and internal-rotation strength, shoulder external- and internal-rotation range of motion (ROM), and maximal throwing velocity were assessed preintervention and postintervention for dominant and nondominant sides. After sling training, external- and internal-rotation strength increased significantly for both sides (P ≤ .001, and P = .004, respectively), with the result that there was no significant change in external- and internal-rotation strength ratios for either the dominant or the nondominant shoulder. No significant differences were observed for external-rotation ROM, while internal-rotation ROM decreased moderately, in particular in the dominant shoulder (P = .005). Maximal throwing velocity remained constant for the dominant arm, whereas a significant increase was found for the nondominant arm (P = .017). This 6-wk strengthening program was effective in improving shoulder external-rotator muscle strength but resulted in a decrease in the ROM in shoulder internal rotation, while throwing velocity remained stable. Adding a stretching program to this type of sling-based training program might help avoid potential detrimental effects on shoulder ROM.

Shoulder arthrodesis for treatment of flail shoulder in children with polio.

PubMed

Miller, Joshua D; Pinero, Joseph R; Goldstein, Rachel; Yen, Yi-Meng; Eves, William; Otsuka, Norman Y

2011-09-01

Poliomyelitis in children can cause paralysis of shoulder girdle muscles leading to a flail shoulder. Shoulder arthrodesis is indicated as a possible treatment for these children in order to stabilize the shoulder. This retrospective study reviewed all shoulder arthrodesis surgeries owing to complications of polio performed at a major medical institution between 1981 and 1996 to assess position of fusion, radiographic evidence of fusion, complications, and patient satisfaction. A review of medical records identified 11 patients undergoing 13 shoulder arthrodesis procedures, with a mean age of 14.7 years at the time of the procedure. Internal fixation was achieved with large cancellous screws in 8 patients and a Dynamic Compression Plate (DCP) plate in 5 procedures. Average follow-up period was 41 months. Eight patients were placed into a spica cast and 5 used a sling postoperatively. Shoulder arthrodesis surgery in this cohort resulted in an average position of fusion with 42.3 degrees of abduction, 23.8 degrees of flexion, and 26.2 degrees of internal rotation. Twelve of the 13 procedures assessed for radiographic union demonstrated fusion. The most common complications were malrotation and nonunion. Of the 13 procedures, 2 underwent humeral osteotomies for malrotation, and 1 with 6.5 mm cancellous screws required revision with a DCP plate owing to nonunion. Six patients underwent hardware removal, 3 of which were specifically owing to complaints of painful hardware. At final follow-up, no patient reported pain and all expressed satisfaction with their results and improved shoulder function after repair. This study is the largest series of shoulder arthrodesis surgeries for treatment of patients with a flail shoulder from polio to date, providing a more thorough analysis of its efficacy as an indicated treatment. Level III-Retrospective Comparative Study.

Season-Ending Shoulder Injuries in the National Collegiate Athletic Association: Data From the NCAA Injury Surveillance Program, 2009-2010 Through 2013-2014.

PubMed

Goodman, Avi D; DeFroda, Steven F; Gil, Joseph A; Kleiner, Justin E; Li, Neill Y; Owens, Brett D

2018-05-01

Examination of the incidence of shoulder season-ending injury (SEI) in the collegiate athlete population is limited. To determine the incidence of shoulder SEI in the National Collegiate Athletic Association (NCAA) and to investigate the risk factors for a shoulder injury ending an athlete's season. Descriptive epidemiology study. All shoulder injuries from the NCAA Injury Surveillance Program database for the years 2009-2010 to 2013-2014 were extracted, and SEI status was noted. The incidences of SEI and non-SEI were calculated for athlete, activity, and injury characteristics and compared via univariable analysis and risk ratios to determine risk factors for an injury being season ending. Shoulder injuries were season ending in 4.3% of cases. The overall incidence of shoulder SEI was 0.31 per 10,000 athlete exposures (AEs), as opposed to 7.25 per 10,000 AEs for all shoulder injuries. Shoulder instability constituted 49.1% of SEI, with an incidence of 0.15 per 10,000 AEs, while fractures had the highest rate of being season ending (41.9%). Men's wrestling had the highest incidence of shoulder SEI (1.65 per 10,000 AEs), while men's soccer had the highest proportion of shoulder injuries that ended a season (14.6%). Overall, men had a 6.3-fold higher incidence of SEI than women and a 2.4-fold increased likelihood that an injury would be season ending. Injury to the shoulder of an NCAA athlete, while somewhat infrequent, can have significant implications on time lost from play. Incidence of these injuries varies widely by sport and injury, with a number of associated risk factors. Athletes sustaining potentially season-ending shoulder injuries, with their coaches and medical providers, may benefit from these data to best manage expectations and outcomes.

Gimballed Shoulders for Friction Stir Welding

NASA Technical Reports Server (NTRS)

Carter, Robert; Lawless, Kirby

2008-01-01

In a proposed improvement of tooling for friction stir welding, gimballed shoulders would supplant shoulders that, heretofore, have been fixedly aligned with pins. The proposal is especially relevant to self-reacting friction stir welding. Some definitions of terms, recapitulated from related prior NASA Tech Briefs articles, are prerequisite to a meaningful description of the proposed improvement. In friction stir welding, one uses a tool that includes (1) a rotating shoulder on top (or front) of the workpiece and (2) a pin that rotates with the shoulder and protrudes from the shoulder into the depth of the workpiece. In conventional friction stir welding, the main axial force exerted by the tool on the workpiece is reacted through a ridged backing anvil under (behind) the workpiece. When conventional friction stir welding is augmented with an auto-adjustable pin-tool (APT) capability, the depth of penetration of the pin into the workpiece is varied in real time by a position- or forcecontrol system that extends or retracts the pin as needed to obtain the desired effect. In self-reacting (also known as self-reacted) friction stir welding as practiced heretofore, there are two shoulders: one on top (or front) and one on the bottom (or back) of the workpiece. In this case, a threaded shaft protrudes from the tip of the pin to beyond the back surface of the workpiece. The back shoulder is held axially in place against tension by a nut on the threaded shaft. Both shoulders rotate with the pin and remain aligned coaxially with the pin. The main axial force exerted on the workpiece by the tool and front shoulder is reacted through the back shoulder and the threaded shaft into the friction-stir-welding machine head, so that a backing anvil is no longer needed. A key transmits torque between the bottom shoulder and the threaded shaft, so that the bottom shoulder rotates with the shaft. This concludes the prerequisite definitions of terms.

Clinical outcomes after arthroscopic release for recalcitrant frozen shoulder.

PubMed

Ebrahimzadeh, Mohammad H; Moradi, Ali; Pour, Mostafa Khalili; Moghadam, Mohammad Hallaj; Kachooei, Amir Reza

2014-09-01

To explain the role of arthroscopic release in intractable frozen shoulders. We used different questionnaires and measuring tools to understand whether arthroscopic release is the superior modality to treat patients with intractable frozen shoulders. Between 2007 and 2013, in a prospective study, we enrolled 80 patients (52 females and 28 males) with recalcitrant frozen shoulder, who underwent arthroscopic release at Ghaem Hospital, a tertiary referral center, in Mashhad, Iran. Before operation, all patients filled out the Disability of Arm, Shoulder and Hand (DASH), Constant, University of California Los Angeles (UCLA), ROWE and Visual Analogue Scale (VAS) for pain questionnaires. We measured the difference in range of motion between both the normal and the frozen shoulders in each patient. The average age of the patients was 50.8±7.1 years. In 49 patients, the right shoulder was affected and in the remaining 31 the left side was affected. Before surgery, the patients were suffering from this disease on average for 11.7±10.3 months. The average time to follow-up was 47.2±6.8 months (14 to 60 months). Diabetes mellitus (38%) and history of shoulder trauma (23%) were the most common comorbidities in our patients. We did not find any significant differences between baseline characteristics of diabetics patients with non-diabetics ones. After surgery, the average time to achieve maximum pain improvement and range of motion were 3.6±2.1 and 3.6±2 months, respectively. The VAS score, constant shoulder score, Rowe score, UCLA shoulder score, and DASH score showed significant improvement in shoulder function after surgery, and shoulder range of motion improved in all directions compared to pre-operation range of motion. According to our results, arthroscopic release of recalcitrant frozen shoulder is a valuable modality in treating this disease. This method could decrease pain and improve both subjective and objective mid-term outcomes.

Clinical Outcomes after Arthroscopic Release for Recalcitrant Frozen Shoulder

PubMed Central

Ebrahimzadeh, Mohammad H; Moradi, Ali; Pour, Mostafa Khalili; Moghadam, Mohammad Hallaj; Kachooei, Amir Reza

2014-01-01

Background: To explain the role of arthroscopic release in intractable frozen shoulders. We used different questionnaires and measuring tools to understand whether arthroscopic release is the superior modality to treat patients with intractable frozen shoulders. Methods: Between 2007 and 2013, in a prospective study, we enrolled 80 patients (52 females and 28 males) with recalcitrant frozen shoulder, who underwent arthroscopic release at Ghaem Hospital, a tertiary referral center, in Mashhad, Iran. Before operation, all patients filled out the Disability of Arm, Shoulder and Hand (DASH), Constant, University of California Los Angeles (UCLA), ROWE and Visual Analogue Scale (VAS) for pain questionnaires. We measured the difference in range of motion between both the normal and the frozen shoulders in each patient. Results: The average age of the patients was 50.8±7.1 years. In 49 patients, the right shoulder was affected and in the remaining 31 the left side was affected. Before surgery, the patients were suffering from this disease on average for 11.7±10.3 months. The average time to follow-up was 47.2±6.8 months (14 to 60 months). Diabetes mellitus (38%) and history of shoulder trauma (23%) were the most common comorbidities in our patients. We did not find any significant differences between baseline characteristics of diabetics patients with non-diabetics ones. After surgery, the average time to achieve maximum pain improvement and range of motion were 3.6±2.1 and 3.6±2 months, respectively. The VAS score, constant shoulder score, Rowe score, UCLA shoulder score, and DASH score showed significant improvement in shoulder function after surgery, and shoulder range of motion improved in all directions compared to pre-operation range of motion. Conclusions: According to our results, arthroscopic release of recalcitrant frozen shoulder is a valuable modality in treating this disease. This method could decrease pain and improve both subjective and objective mid-term outcomes. PMID:25386586

Rotational glenohumeral adaptations are associated with shoulder pathology in professional male handball players.

PubMed

Lubiatowski, Przemyslaw; Kaczmarek, Piotr; Cisowski, Pawel; Breborowicz, Ewa; Grygorowicz, Monika; Dzianach, Marcin; Krupecki, Tomasz; Laver, Lior; Romanowski, Leszek

2018-01-01

Glenohumeral range of motion adaptations may affect throwing athletes and contribute to shoulder injury. The purpose of this study was to evaluate shoulder rotation deficits among elite professional handball players and its correlation to the presence of shoulder pain and morphological changes. Eighty-seven elite professional handball players and 41 healthy non-athlete volunteers participated in the study. Evaluations included measurement of range of internal and external rotation, total arch of motion, identification of shoulder pain and ultrasound scan for diagnosis of rotator cuff tears and internal impingement. Glenohumeral rotational deficits (>20-25°) were found among 11 players group (13%). The throwing shoulders in the players group showed a decrease in internal rotation and an increase in external rotation with significantly larger ranges among players compared to the non-athlete group. Internal rotation deficit >20° was associated with higher incidence of shoulder pain among players. Both internal rotation deficits (>25°) and total arch of motion deficit (>20°) co-existed with higher incidence of internal impingement. Shoulder pain was common (36/97-41%) and was associated with decreased external rotation and total arch of motion. Internal impingement (found in 13/87-15%) correlated with decreased rotation ranges and a greater deficit in total arch of motion, whereas higher gain in external rotation correlated with a partial rotator cuff tear (found in 12/87-14%). Shoulder pathologies and problems commonly affected the group of handball players. Greater glenohumeral rotational deficits in throwing shoulders of handball players correlate with shoulder pain and internal impingement, while increased external rotation with partial rotator cuff tears. Such deficits affect 13% of the athlete population. Major clinical relevance of the study is to monitor handball players' shoulders both clinically and by proper imaging. Evaluation of range of rotation seems to identify shoulders at risk of the pathology. Cross-Sectional study with control group, Level II.

Ipsilateral shoulder pain in patients following lung resection in the decubitus position.

PubMed

Bando, Takae; Kondo, Kazuya; Onishi, Chiemi; Kajiura, Koichiro; Takizawa, Hiromitsu; Yamada, Kazuyo; Sato, Hiromi; Imai, Yoshie

2018-03-01

To examine the frequency, influencing factors and clinical course of shoulder pain in patients following lung resection. Thoracoscopes have been introduced in the surgical treatment of lung cancer and allow for less invasive surgery with a minimal incision. However, decubitus position-related shoulder pain on the operated side has not yet been investigated. A longitudinal descriptive study. Patients who underwent lung resection in the decubitus position. Patients were interviewed 2 days before surgery and once daily for 5 days after surgery. Interview items included background data, the concomitant use of epidural anaesthesia, operative duration, the presence of preoperative shoulder stiffness (excluding shoulder pain), type of surgery and site of operation. The intensity of pain was approximately 5 on an 11-point numerical rating scale. Descriptive statistics on patient backgrounds were obtained using SPSS Statistics 22 for Windows. Of the 74 patients who underwent lung resection in a decubitus position, 30 (40.5%) developed shoulder pain on the operated side. The highest rating occurred 1 day after surgery and decreased over time. The following two factors were found to influence shoulder pain on the operated side: operative duration (Z = -2.63; p = .01) and the presence of preoperative shoulder stiffness (excluding shoulder pain) (χ 2  = 4.16; p = .04). This study demonstrated that approximately 40% of patients who underwent lung resection in the decubitus position developed shoulder pain. The presence of postoperative shoulder pain was related to both the duration of the operation and to the presence of preoperative shoulder stiffness. Although the shoulder pain resolves within 4 days, it causes the patient additional discomfort and distress. Therefore, further research is needed on positioning for thoracotomy in order to investigate ways to reduce or eliminate this complication of lung surgery. © 2017 John Wiley & Sons Ltd.

Chest cage angle difference and rotation of main thoracic curve are independent risk factors of postoperative shoulder imbalance in surgically treated patients with adolescent idiopathic scoliosis.

PubMed

Yagi, Mitsuru; Takemitsu, Masakazu; Machida, Masafumi

2013-09-01

Retrospective case series of surgically treated adolescent patients with scoliosis. To assess the prevalence and independent risk factors for postoperative shoulder imbalance in surgically treated adolescent patients with idiopathic scoliosis. Despite recent reports that have identified risk factors for postoperative shoulder imbalance, the relative risks remain unclear. A retrospective review of 85 consecutive patients treated with thoracic fusion with a minimum 2-year follow-up (mean, 3.1 yr) was conducted to investigate the patient radiographical measurements and demographics. Shoulder height difference (SHD) was measured as the graded height difference of the soft tissue shadows. A SHD more than 2 cm indicated an unbalanced shoulder. Patient demographics and radiographical data were studied to determine risk factors for postoperative SHD. The potential risk factors included age, sex, Risser sign, Cobb angle, flexibility, and apical vertebral rotation (AVR) of the main curve, upper-instrumented vertebra level, SHD, and clavicle chest cage angle difference (CCAD). Univariate and multivariate logistic regression analyses were performed to determine the independent risk factors for postoperative shoulder imbalance. Of the 85 patients, 21 patients presented postoperative shoulder imbalance. The univariate analysis indicated age, Risser sign, Cobb angle of the main curve, AVR of the main curve, and CCAD as risk factors, but the multivariate logistic regression analysis showed that only AVR of the main curve and CCAD were independent risk factors for postoperative shoulder imbalance (AVR, P = 0.04, odds ratio (OR): 3.54; CCAD, P = 0.01, OR: 5.10). Postoperative shoulder imbalance was observed in 25% of the surgically treated adolescent patients. The CCAD and AVR of the main thoracic curve were independent risk factors for postoperative shoulder imbalance in surgically treated patients with adolescent idiopathic scoliosis. The significant correlation between CCAD and postoperative shoulder imbalance seen in this study strongly suggests that the relationship of the shoulder girdle and chest cage has a role in maintaining shoulder balance.

Hemiplegic shoulder pain: implications for occupational therapy treatment.

PubMed

Gilmore, Paula E; Spaulding, Sandi J; Vandervoort, Anthony A

2004-02-01

Hemiplegic shoulder pain is common after stroke causing hemiplegia. It adversely affects the recovery of arm function and independence in activities of daily living. Subluxation, abnormal tone and limited range of motion or capsular constrictions have been reported as potential causes. Other factors such as rotator cuff tears, brachial plexus injury, shoulder-hand syndrome and other pre-existing pathological conditions may also be associated with hemiplegic shoulder pain. The etiology remains unclear, but hemiplegic shoulder pain may result from a combination of the above factors. This literature review examines the possible causes of hemiplegic shoulder pain and discusses the implications for occupational therapy treatment. Occupational therapy interventions include proper positioning, facilitation of movement through purposeful therapeutic activities, increasing passive range of motion, implementation of external supports and treatment of shoulder-hand syndrome. Understanding the processes involved will assist with effective assessment, treatment and prevention of hemiplegic shoulder pain. This will facilitate clients' participation in rehabilitation programs and move them towards attainment of optimal function.

Platelet-Rich Plasma for Frozen Shoulder: A Case Report.

PubMed

Aslani, Hamidreza; Nourbakhsh, Seyed Taghi; Zafarani, Zohreh; Ahmadi-Bani, Monireh; Ananloo, Mohammad Ebrahim Shahsavand; Beigy, Maani; Salehi, Shahin

2016-01-01

Frozen shoulder is a glenohumeral joint disorder that movement because of adhesion and the existence of fibrosis in the shoulder capsule. Platelet-rich plasma can produce collagen and growth factors, which increases stem cells and consequently enhances the healing. To date, there is no evidence regarding the effectiveness of platelet-rich plasma in frozen shoulder. A 45-year-old man with shoulder adhesive capsulitis volunteered for this treatment. He underwent two consecutive platelet-rich plasma injections at the seventh and eighth month after initiation of symptoms. We measured pain, function, ROM by the visual analogue scale (VAS), scores from the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire and goniometer; respectively. After first injection, the patient reported 60% improvement regarding diurnal shoulder pain, and no night pain. Also, two-fold improvement for ROM and more than 70% improvement for function were reported. This study suggests the use of platelet-rich plasma in frozen shoulder to be tested in randomized trials.

Humeral retroversion and shoulder rotational mobility in young handball practitioners

PubMed Central

Quadros, Gustavo Aguiar; Döhnert, Marcelo Baptista

2015-01-01

ABSTRACT OBJECTIVE : To evaluate the prevalence of humeral retroversion and rotational mobility (RHH) in young handball practitioners and non-practitioners. METHODS : This is a cross-sectional study performed with two groups: the handball group, with 14 female students practicing handball and the control group, with 13 young participants non-practicing pitch sports. RESULTS : The handball group presented full rotational movement (FRM) hi-gher than the control group in both the dominant shoulder (p=0.001) and the non-dominant shoulder (p=0.0001). The mobility of active and passive internal rotation was significantly higher in handball players in both shoulders. The handball group presented lower internal rotation range of motion for the dominant shoulder as compared to the non-dominant shoul-der (p=0.001). CONCLUSION : Young handball practitioners, des-pite skeletally immature, showed a higher MRT than the control group. The handball group showed loss of internal rotation (medial) on the dominant shoulder as compared to the non--dominant shoulder. Level of Evidence II, Prospective Study. PMID:27057141

Shoulder dystocia: definitions and incidence.

PubMed

Hansen, Alexandra; Chauhan, Suneet P

2014-06-01

Though subjective in nature, both the American College of Obstetricians and Gynecologists practice bulletin and the Royal College of Obstetricians and Gynaecologists green guideline are in agreement on the descriptor of shoulder dystocia: requirement of additional obstetric maneuvers when gentle downward traction has failed to affect the delivery of the shoulders. The rate of shoulder dystocia is about 1.4% of all deliveries and 0.7% for vaginal births. Compared to non-diabetics (0.6%), among diabetics, the rate of impacted shoulders is 201% higher (1.9%); newborns delivered by vacuum or forceps have 254% higher likelihood of shoulder dystocia than those born spontaneously (2.0% vs. 0.6%, respectively). When the birthweight is categorized as <4000, 4000-4449, and >4500 g, the likelihood of shoulder dystocia in the US vs. other countries varies significantly. Future studies should focus on lowering the rate of shoulder dystocia and its associated morbidities, without concomitantly increasing the rate of cesarean delivery. Copyright © 2014 Elsevier Inc. All rights reserved.

Range of motion of diabetic frozen shoulder recovers to the contralateral level

PubMed Central

Vastamäki, Heidi; Ristolainen, Leena

2016-01-01

Objective To determine whether frozen shoulder heals equally well in patients with and without diabetes and whether dependency on insulin affects the outcome. Methods We retrospectively examined 178 patients with idiopathic frozen shoulder; 27 patients had diabetes. We evaluated range of motion, pain, and functional results. The mean follow-up was 9.7 years (SD, 7.1 years). Results In the presence of frozen shoulder, range of motion did not differ between patients with and without diabetes. At follow-up, range of motion in all directions of both the affected and unaffected shoulders of patients with diabetes was inferior to that of patients without diabetes. Among patients with diabetes, range of motion of the once-frozen shoulder reached the level of the unaffected shoulder. Patients with and without diabetes experienced similar pain except during exertion. The Constant–Murley score was not significantly different between the two groups, and insulin dependency did not lead to worse outcomes. Conclusion Frozen shoulder heals well in patients with diabetes. PMID:27856934

Humeral retroversion and shoulder rotational mobility in young handball practitioners.

PubMed

Quadros, Gustavo Aguiar; Döhnert, Marcelo Baptista

2015-01-01

: To evaluate the prevalence of humeral retroversion and rotational mobility (RHH) in young handball practitioners and non-practitioners. : This is a cross-sectional study performed with two groups: the handball group, with 14 female students practicing handball and the control group, with 13 young participants non-practicing pitch sports. : The handball group presented full rotational movement (FRM) hi-gher than the control group in both the dominant shoulder (p=0.001) and the non-dominant shoulder (p=0.0001). The mobility of active and passive internal rotation was significantly higher in handball players in both shoulders. The handball group presented lower internal rotation range of motion for the dominant shoulder as compared to the non-dominant shoul-der (p=0.001). : Young handball practitioners, des-pite skeletally immature, showed a higher MRT than the control group. The handball group showed loss of internal rotation (medial) on the dominant shoulder as compared to the non--dominant shoulder. Level of Evidence II, Prospective Study.

Manual adjustable probe tool for friction stir welding

NASA Technical Reports Server (NTRS)

Oelgoetz, Peter A. (Inventor); Ding, Jeff (Inventor)

2000-01-01

A friction stir welding tool is provided generally comprising three parts: a rotatable welding tool body (22) that has an outer threaded surface (32) and a probe (24) extending from a distal end of the body, a shoulder (26), which has a threaded inner surface (40) and a bore (36) at a distal end of the shoulder, and a jam nut (28), which has a threaded inner surface (42). The shoulder is threaded onto the tool body such that the probe extends from the shoulder through the bore by a preferred length. The jam nut is then threaded onto the tool body to secure the shoulder. The tool is operatively connected to a drive motor for rotating the tool body. The shoulder may include a knife edge projecting from the distal end (38) thereof adjacent the bore. The knife edge inhibits the weld material from migrating along the probe to intrude inside the shoulder, where it may prevent separation of the tool body and the shoulder when readjustment of the tool is necessary.

An examination of shoulder kinematics and kinetics when using a commercial trunk harness while sheep shearing.

PubMed

Gregory, Diane E; Milosavljevic, Stephan; Pal, Poonam; Callaghan, Jack P

2008-01-01

Sheep shearing is a very physically demanding occupation, especially on the low back, such that many commercial harnesses have been developed to help reduce the load on the back. Such harnesses have been shown to significantly reduce peak and cumulative low back loads; however, the effect that these harnesses have on the shoulders, which are also highly involved during sheep shearing, has not been previously examined. The purpose of this study was to examine the shoulder postures and cumulative shoulder moments of 12 New Zealand sheep shearers. The use of the trunk harness reduced the percentage of time spent in shoulder flexion greater than 90 degrees and the time spent in shoulder abduction greater than 45 degrees as well as reduced the cumulative net joint flexor, abductor, and adductor shoulder moments by a minimum of 21%, 14%, and 42%, respectively. Therefore, the use of a commercial trunk harness to reduce low back injury may also help to reduce the risk of shoulder injury while sheep shearing.