Science.gov

Sample records for ribbed reinforced concrete

  1. Solar-Array Substrate From Glass-Reinforced Concrete

    NASA Technical Reports Server (NTRS)

    Eirls, J. L.

    1985-01-01

    Design elminiates glass superstrate and associated metal framing. Panel has two trapezoidal stiffening ribs for structural support. Strategic placement of ribs with embedded support tubes (standard PVC tubing) minimizes bending moments and resulting stresses produced by installation and windloads. Glass-reinforced concrete panel has smooth flat surface suitable for solar substrate and includes structural bracing for rigidity and design adaptable to mass production.

  2. Optimization of reinforced concrete slabs

    NASA Technical Reports Server (NTRS)

    Ferritto, J. M.

    1979-01-01

    Reinforced concrete cells composed of concrete slabs and used to limit the effects of accidental explosions during hazardous explosives operations are analyzed. An automated design procedure which considers the dynamic nonlinear behavior of the reinforced concrete of arbitrary geometrical and structural configuration subjected to dynamic pressure loading is discussed. The optimum design of the slab is examined using an interior penalty function. The optimization procedure is presented and the results are discussed and compared with finite element analysis.

  3. Microwave NDE for Reinforced Concrete

    NASA Astrophysics Data System (ADS)

    Arunachalam, Kavitha; Melapudi, Vikram R.; Rothwell, Edward J.; Udpa, Lalita; Udpa, Satish S.

    2006-03-01

    Nondestructive assessment of the integrity of civil structures is of paramount importance for ensuring safety. In concrete imaging, radiography, ground penetrating radar and infrared thermography are some of the widely used techniques for health monitoring. Other emerging technologies that are gaining impetus for detecting and locating flaws in steel reinforcement bar include radioactive computed tomography, microwave holography, microwave and acoustic tomography. Of all the emerging techniques, microwave NDT is a promising imaging modality largely due to their ability to penetrate thick concrete structures, contrast between steel rebar and concrete and their non-radioactive nature. This paper investigates the feasibility of a far field microwave NDE technique for reinforced concrete structures.

  4. Corrosion control of steel-reinforced concrete

    NASA Astrophysics Data System (ADS)

    Chung, D. D. L.

    2000-10-01

    The methods and materials for corrosion control of steel-reinforced concrete are reviewed. The methods are steel surface treatment, the use of admixtures in concrete, surface coating on concrete, and cathodic protection.

  5. 10. CONCRETE BRIDGE, REINFORCED BEAM TYPE ON CONCRETE, SOUTH CAROLINA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. CONCRETE BRIDGE, REINFORCED BEAM TYPE ON CONCRETE, SOUTH CAROLINA STATE HIGHWAY DEPARTMENT, COLUMBIA, SOUTH CAROLINA (photocopy of drawing) - Salkehatchie Bridge, State Route No. 64 spanning Salkehatchie River, Barnwell, Barnwell County, SC

  6. Modeling of concrete cracking due to corrosion of embedded reinforcement

    NASA Astrophysics Data System (ADS)

    Aligizaki, Kalliopi K.

    Corrosion of steel in concrete continues freely after concrete cracks, because concrete does not provide even physical protection to steel any more. In this Thesis, the effects of concrete quality and design parameters on concrete cracking due to corrosion of embedded reinforcement are examined. The parameters tested are concrete strength, thickness of concrete cover, diameter of steel bar, crack width at the concrete surface, the presence of polypropylene fibers, and corrosion occurring at a limited length. Four air-entrained concrete mixtures were proportioned having different water-cement ratios (0.40, 0.45, 0.50 and 0.55). The control mixture was selected according to the classifications used by the Eurocode and to represent concrete used in a marine environment. An additional mixture was proportioned containing polypropylene fibers. A total of 148 reinforced concrete specimens (250 x 140 x 140 mm) containing one ribbed steel bar were prepared in the laboratory. Corrosion of the reinforcing steel bars was accelerated by two ways: (a) by adding NaCl in the initial concrete mixtures in an amount of 3.7% by mass of cement, and (b) by anodically charging the steel bar with a current density of 500 mA/m2. Different electrochemical tests were carried out before anodically charging the steel bars and after concrete cracked due to corrosion of embedded reinforcement, in order to determine various electrochemical parameters. After the concrete specimens cracked, the average crack width at the concrete surface and the iron mass loss were determined. A theoretical model is proposed and is used as the basis for developing the final analytical equation. A polynomial regression analysis was carried out in order to relate the parameters tested in this study to the amount of oxides needed to cause cracking of the concrete cover. For the parameters examined and the assumptions made, the analysis indicates that the model proposed explains 30% of the variation of the iron mass

  7. Development of ductile hybrid fiber reinforced polymer (D-H-FRP) reinforcement for concrete structures

    NASA Astrophysics Data System (ADS)

    Somboonsong, Win

    The corrosion of steel rebars has been the major cause of the reinforced concrete deterioration in transportation structures and port facilities. Currently, the Federal Highway Administration (FHWA) spends annually $31 billion for maintaining and repairing highways and highway bridges. The study reported herein represents the work done in developing a new type of reinforcement called Ductile Hybrid Fiber Reinforced Polymer or D-H-FRP using non-corrosive fiber materials. Unlike the previous FRP reinforcements that fail in a brittle manner, the D-H-FRP bars exhibit the stress-strain curves that are suitable for concrete reinforcement. The D-H-FRP stress-strain curves are linearly elastic with a definite yield point followed by plastic deformation and strain hardening resembling that of mild steel. In addition, the D-H-FRP reinforcement has integrated ribs required for concrete bond. The desirable mechanical properties of D-H-FRP reinforcement are obtained from the integrated design based on the material hybrid and geometric hybrid concepts. Using these concepts, the properties can be tailored to meet the specific design requirements. An analytical model was developed to predict the D-H-FRP stress-strain curves with different combination of fiber materials and geometric configuration. This model was used to optimize the design of D-H-FRP bars. An in-line braiding-pultrusion manufacturing process was developed at Drexel University to produce high quality D-H-FRP reinforcement in diameters that can be used in concrete structures. A series of experiments were carried out to test D-H-FRP reinforcement as well as their individual components in monotonic and cyclic tensile tests. Using the results from the tensile tests and fracture analysis, the stress-strain behavior of the D-H-FRP reinforcement was fully characterized and explained. Two series of concrete beams reinforced with D-H-FRP bars were studied. The D-H-FRP beam test results were then compared with companion

  8. Carbonation and its effects in reinforced concrete

    SciTech Connect

    Broomfield, J.P.

    2000-01-01

    Carbonation is the result of interaction of carbon dioxide (CO{sub 2}) gas in the atmosphere with the alkaline hydroxides in the concrete. CO{sub 2} diffuses through the concrete and rate of movement of the carbonation front roughly follows Fick's law of diffusion. Carbonation depth can be measured by exposing fresh concrete and spraying it with phenolphthalein indicator solution. An example of the test on a reinforced concrete mullion is given.

  9. Introduction to Concrete Reinforcing. Instructor Edition. Introduction to Construction Series.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This instructor's guide contains the materials required to teach a competency-based introductory course in concrete reinforcing to students who have chosen to explore careers in construction. It contains three units: concrete reinforcing materials, concrete reinforcing tools, and applied skills. Each instructional unit includes some or all of the…

  10. Service life prediction of reinforced concrete structures

    SciTech Connect

    Liang, M.T.; Wang, K.L.; Liang, C.H.

    1999-09-01

    This paper is focused on the estimation of durability and service life of reinforced concrete structures. Assuming that the chloride ion in concrete can be absorbed on tricalcium aluminate, calcium silicate hydrate, and by other constituents of hardened cement paste, hydrated or not, the exact analytical solution of the governing partial differential equation together with its boundary and initial conditions can be obtained through nondimensional parameters and Laplace's transform. When the results of an exact analytical solution using suitable parameters were compared with the results of previous experimental work, the differences were found to be very small. This suggests that the absorption model is of considerable value. The exact analytical solution with the saturation parameter and time and diffusion coefficients under different effective electrical potential could be used to predict both the experimental results and the service life of reinforced concrete structures.

  11. Evaluation of concrete reinforcements using magnetostrictive sensors

    NASA Astrophysics Data System (ADS)

    Bartels, Keith A.; Dynes, Chris P.; Lu, Yichi; Kwun, Hegeon

    1999-02-01

    In this paper, a review is presented of various applications of the magnetostrictive sensor (MsS) technology to the nondestructive evaluation of steel reinforcing bars and seven-wire strands. MsSs have been applied to the detection of corrosion in and out of concrete, the quantification of corrosion, the detection of debonding, the measurement of tensile stress, the monitoring of concrete curing, the monitoring of wire breakage, and the location of broken or fractured wires. A review of the MsS technology is given along with an assessment of the utility of the technology in the above-mentioned applications.

  12. Cohesive fracture model for functionally graded fiber reinforced concrete

    SciTech Connect

    Park, Kyoungsoo; Paulino, Glaucio H.; Roesler, Jeffery

    2010-06-15

    A simple, effective, and practical constitutive model for cohesive fracture of fiber reinforced concrete is proposed by differentiating the aggregate bridging zone and the fiber bridging zone. The aggregate bridging zone is related to the total fracture energy of plain concrete, while the fiber bridging zone is associated with the difference between the total fracture energy of fiber reinforced concrete and the total fracture energy of plain concrete. The cohesive fracture model is defined by experimental fracture parameters, which are obtained through three-point bending and split tensile tests. As expected, the model describes fracture behavior of plain concrete beams. In addition, it predicts the fracture behavior of either fiber reinforced concrete beams or a combination of plain and fiber reinforced concrete functionally layered in a single beam specimen. The validated model is also applied to investigate continuously, functionally graded fiber reinforced concrete composites.

  13. Prestressed concrete using KEVLAR reinforced tendons

    SciTech Connect

    Dolan, C.W.

    1989-01-01

    KEVLAR is a high strength, high modulus synthetic fiber manufactured by the E.I. DuPont de Nemours Company. The fiber is resistant to chloride and alkali attack. The resistance is enhanced when the fibers are assembled into a resin matrix and fabricated as rods. These properties suggest that KEVLAR reinforced rods may be a substitute for high strength steel prestress tendons in certain applications such as bridge decks and parking structures. This dissertation presents the background, theoretical development, and experimental investigations of KEVLAR reinforced rod strength, anchorage, fabrication and performance in prestressed concrete structures. The study concludes that KEVLAR has significant potential for these prestressed concrete applications. However, the reliability of the long term anchorage of the KEVLAR reinforced rods must be improved before production applications are undertaken. KEVLAR has a low shear strength compared to its tensile capacity. The anchorage of KEVLAR reinforced rods is sensitive to the shear forces generated in the anchorage assembly. Finite element analyses, using interface elements to simulate the addition of a mold release agent in a conic anchor, predict the behavior of resin socketed anchors. Test results confirm that mold release agents reduce the anchor shear stresses and suggest that moderate strength resins may be used in the anchor. KEVLAR is nearly linearly elastic to failure, yet ductility of a structure is an important design concern. Prestressed concrete beam tests using both bonded and unbonded tendons demonstrated that ductile structural behavior is obtained. Methods of predicting the strength and deflection behavior of the prestressed beams are presented and the theoretical predictions are compared to the experimental results. The overall correlation between predicted and theoretical results is satisfactory.

  14. 7. Detail view of reinforced concrete archrings comprising dam's upstream ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Detail view of reinforced concrete arch-rings comprising dam's upstream face. Impressions of the wooden formwork used in construction are visible in the concrete. - Little Rock Creek Dam, Little Rock Creek, Littlerock, Los Angeles County, CA

  15. Anodes for cathodic protection of reinforced concrete

    SciTech Connect

    S.J. Bullard; B.S. Covino, Jr.; S.D. Cramer; G.R. Holcomb; J.H. Russell

    2000-03-01

    Consumable anodes were evaluated in the laboratory for use in cathodic protection systems for steel reinforced concrete bridges in coastal environments and in areas where de-icing salts are employed. The anode materials include Zn-hydrogel and thermal-sprayed Zn, Zn-15Al, and Al-12Zn-0.2In. These anodes were evaluated for service in both galvanic (GCP) and impressed current (ICCP) cathodic protection systems. ICCP anodes were electrochemically aged at a factor of 15 times greater than used by the Oregon Department of Transportation in typical coastal ICCP systems (2.2 mA/m{sup 2} based on anode area). Increasing moisture at the anode-concrete interface reduced the operating voltage of all the anodes. The pH at the anode-concrete interface fell to 7 to 8.5 with electrochemical age. Bond strength between the anodes and concrete decreased with electrochemical aging. Interfacial chemistry was the critical link between long-term anode performance and electrochemical age. Zn-hydrogel and the rmal-sprayed Zn and Al-12Zn-0.2In GCP anodes appear to supply adequate protection current to rebar in the Cape Perpetua Viaduct.

  16. Research progress of microbial corrosion of reinforced concrete structure

    NASA Astrophysics Data System (ADS)

    Li, Shengli; Li, Dawang; Jiang, Nan; Wang, Dongwei

    2011-04-01

    Microbial corrosion of reinforce concrete structure is a new branch of learning. This branch deals with civil engineering , environment engineering, biology, chemistry, materials science and so on and is a interdisciplinary area. Research progress of the causes, research methods and contents of microbial corrosion of reinforced concrete structure is described. The research in the field is just beginning and concerted effort is needed to go further into the mechanism of reinforce concrete structure and assess the security and natural life of reinforce concrete structure under the special condition and put forward the protective methods.

  17. 150. Credit ER. Building reinforced concrete portion of Coleman Canal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    150. Credit ER. Building reinforced concrete portion of Coleman Canal inverted siphon #2. Longitudinal steel reinforcing rods are visible at bottom. (ER, v. 64 1911 p. 702). - Battle Creek Hydroelectric System, Battle Creek & Tributaries, Red Bluff, Tehama County, CA

  18. Monitoring corrosion in reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Kung, Peter; Comanici, Maria I.

    2014-06-01

    Many defects can cause deterioration and cracks in concrete; these are results of poor concrete mix, poor workmanship, inadequate design, shrinkage, chemical and environmental attack, physical or mechanical damage, and corrosion of reinforcing steel (RS). We want to develop a suite of sensors and systems that can detect that corrosion is taking place in RS and inform owners how serious the problem is. By understanding the stages of the corrosion process, we can develop special a sensor that detects each transition. First, moisture ingress can be monitored by a fiber optics humidity sensor, then ingress of Chloride, which acts as a catalyst and accelerates the corrosion process by converting iron into ferrous compounds. We need a fiber optics sensor which can quantify Chloride ingress over time. Converting ferric to ferrous causes large volume expansion and cracks. Such pressure build-up can be detected by a fiber optic pressure sensor. Finally, cracks emit acoustic waves, which can be detected by a high frequency sensor made with phase-shifted gratings. This paper will discuss the progress in our development of these special sensors and also our plan for a field test by the end of 2014. We recommend that we deploy these sensors by visually inspecting the affected area and by identifying locations of corrosion; then, work with the designers to identify spots that would compromise the integrity of the structure; finally, drill a small hole in the concrete and insert these sensors. Interrogation can be done at fixed intervals with a portable unit.

  19. Permeability and corrosion resistance of reinforced sulfur concrete

    SciTech Connect

    Wrzesinski, W.R.; McBee, W.C.

    1988-01-01

    This report presents the findings form a 1-yr Bureau of Mines program in which sulfur concrete reinforcing materials were tested and evaluated to determine their resistance to corrosion. It also summarizes the permeation characteristics of sulfur concrete and the exemplary of precast, reinforced sulfur concrete structures in various industrial environments. The Bureau is furthering the development of sulfur concrete technology as part of a larger effort to find uses for the Nation's plentiful sulfur resources in construction materials. Sulfur concrete is a corrosion-resistant material that can be used in acid and salt environments where conventional materials fail.

  20. 19. Virginia Route 605 grade separation structure. This reinforced concrete ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Virginia Route 605 grade separation structure. This reinforced concrete rigid frame structure. This reinforced concrete rigid frame structure was built in 1950. It is an example of the most common ornament used on the parkway where the headwall, wingwalls, and railing is faced rusticated stone, but not the interior abutment walls and the bottom of the arch are plain concrete. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  1. Neutron imaging of water penetration into cracked steel reinforced concrete

    NASA Astrophysics Data System (ADS)

    Zhang, P.; Wittmann, F. H.; Zhao, T.; Lehmann, E. H.

    2010-04-01

    Service life and durability of reinforced concrete structures have become a crucial issue because of the economical and ecological implications. Service life of reinforced concrete structures is often limited by penetration of water and chemical compounds dissolved in water into the porous cement-based material. By now it is well-known that cracks in reinforced concrete are preferential paths for ingress of aggressive substances. Neutron radiography was successfully applied to study the process of water penetration into cracked steel reinforced concrete. In addition, the effectiveness of integral water repellent concrete to prevent ingress of water and salt solutions was investigated. Results are described in detail in this contribution. It will be shown that neutron radiography is a powerful method to visualize the process of water penetration into cracked and uncracked cement-based materials. On the basis of the obtained experimental data, it is possible to quantify the time-dependent water distributions in concrete with high accuracy and spatial resolution. It is of particular interest that penetration of water and salt solutions into damaged interfaces between concrete and steel can be visualized by means of neutron radiography. Deteriorating processes in cracked reinforced concrete structures can be studied in a completely new way. This advanced technology will help and find adequate ways to improve durability and service life of reinforced concrete structures. This will mean at the same time an essential contribution to improved sustainability.

  2. CREATION OF MUSIC WITH FIBER REINFORCED CONCRETE

    NASA Astrophysics Data System (ADS)

    Kato, Hayato; Takeuchi, Masaki; Ogura, Naoyuki; Kitahara, Yukiko; Okamoto, Takahisa

    This research focuses on the Fiber Reinforcement Concrete(FRC) and its performance on musical tones. Thepossibility of future musical instruments made of this concrete is discussed. Recently, the technical properties of FRC had been improved and the different production styles, such as unit weight of binding material and volume of fiber in the structure, hardly affects the results of the acoustics. However, the board thickness in the FRC instruments is directly related with the variety of musical tone. The FRC musical effects were compared with those produced with wood on wind instruments. The sounds were compared with those produced with woodwind instruments. The sound pressure level was affected by the material and it becomes remarkably notorious in the high frequency levels. These differences had great influence on the spectrum analysis of the tone in the wind instruments and the sensory test. The results from the sensory test show dominant performances of brightness, beauty and power in the FRC instruments compared with those made of wood.

  3. Shear transfer in concrete reinforced with carbon fibers

    NASA Astrophysics Data System (ADS)

    El-Mokadem, Khaled Mounir

    2001-10-01

    Scope and method of study. The research started with preliminary tests and studies on the behavior and effect of carbon fibers in different water solutions and mortar/concrete mixes. The research work investigated the use of CF in the production of concrete pipes and prestressed concrete double-tee sections. The research then focused on studying the effect of using carbon fibers on the direct shear transfer of sand-lightweight reinforced concrete push-off specimens. Findings and conclusions. In general, adding carbon fibers to concrete improved its tensile characteristics but decreased its compressive strength. The decrease in compressive strength was due to the decrease in concrete density as fibers act as three-dimensional mesh that entrapped air. The decrease in compressive strength was also due to the increase in the total surface area of non-cementitious material in the concrete. Sand-lightweight reinforced concrete push-off specimens with carbon fibers had lower shear carrying capacity than those without carbon fibers for the same cement content in the concrete. Current building codes and specifications estimate the shear strength of concrete as a ratio of the compressive strength. If applying the same principals then the ratio of shear strength to compressive strength for concrete reinforced with carbon fibers is higher than that for concrete without carbon fibers.

  4. Surface treated polypropylene (PP) fibres for reinforced concrete

    SciTech Connect

    López-Buendía, Angel M.; Romero-Sánchez, María Dolores; Climent, Verónica

    2013-12-15

    Surface treatments on a polypropylene (PP) fibre have contributed to the improvement of fibre/concrete adhesion in fibre-reinforced concrete. The treatments to the PP fibre were characterized by contact angle measurements, ATR-IR and XPS to analyse chemical alterations. The surface topography and fibre/concrete interaction were analysed by several microscopic techniques, namely optical petrographic, and scanning electron microscopy. Treatment modified the surface chemistry and topography of the fibre by introducing sodium moieties and created additional fibre surface roughness. Modifications in the fibre surface led to an increase in the adhesion properties between the treated fibres and concrete and an improvement in the mechanical properties of the fibre-reinforced concrete composite as compared to the concrete containing untreated PP fibres. Compatibility with the concrete and increased roughness and mineral surface was also improved by nucleated portlandite and ettringite mineral association anchored on the alkaline PP fibre surface, which is induced during treatment.

  5. 2. FLAME DEFLECTOR FROM THE REINFORCED CONCRETE SLAB ROOF, VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. FLAME DEFLECTOR FROM THE REINFORCED CONCRETE SLAB ROOF, VIEW TOWARDS SOUTHWEST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-2, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  6. 9. FLAME DEFLECTOR FROM REINFORCED CONCRETE SLAB ROOF, VIEW TOWARDS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. FLAME DEFLECTOR FROM REINFORCED CONCRETE SLAB ROOF, VIEW TOWARDS NORTHWEST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-1, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  7. 3. SOUTH FLAME DEFLECTOR FROM THE REINFORCED CONCRETE ROOF, VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. SOUTH FLAME DEFLECTOR FROM THE REINFORCED CONCRETE ROOF, VIEW TOWARDS EAST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-2, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  8. 1. GENERAL VIEW LOOKING EAST, SHOWING REINFORCED CONCRETE BRIDGE SPANNING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. GENERAL VIEW LOOKING EAST, SHOWING REINFORCED CONCRETE BRIDGE SPANNING SIMPSON CREEK. - Bridgeport Lamp Chimney Company, Simpson Creek Bridge, Spanning Simpson Creek, State Route 58 vicinity, Bridgeport, Harrison County, WV

  9. 4. EAST ELEVATION. TOWER, OF REINFORCED CONCRETE CONSTRUCTION, WAS BUILT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EAST ELEVATION. TOWER, OF REINFORCED CONCRETE CONSTRUCTION, WAS BUILT IN 1944 TO SPEED UP THE FUELING OF LOCOMOTIVE TENDERS DURING WARTIME. - Collinwood Railroad Yard Coal Tipple, Between East 146th Street & East 152nd Street, Cleveland, Cuyahoga County, OH

  10. 7. REINFORCED CONCRETE SLAB ROOF FROM NORTHWEST EDGE, FLAME DEFLECTOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. REINFORCED CONCRETE SLAB ROOF FROM NORTHWEST EDGE, FLAME DEFLECTOR AT RIGHT, VIEW TOWARDS SOUTHEAST. - Glenn L. Martin Company, Titan Missile Test Facilities, CaptiveTest Stand D-3, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  11. 11. REINFORCED CONCRETE SLAB ROOF, FLAME DEFLECTOR AT RIGHT, CONTROL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. REINFORCED CONCRETE SLAB ROOF, FLAME DEFLECTOR AT RIGHT, CONTROL BUILDING B AT FAR CENTER RIGHT. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-4, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  12. Detail view of reinforced concrete of Bonita Ridge Access Road ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of reinforced concrete of Bonita Ridge Access Road Retaining Wall, camera facing northwest - Fort Barry, Bonita Ridge Access Road, Retaining Wall, Point Bonita, Marin Headlands, Sausalito, Marin County, CA

  13. IET. Exhaust stack foundation under construction. Reinforced concrete footings for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    IET. Exhaust stack foundation under construction. Reinforced concrete footings for duct at right of stack. Foundation is in octagonal shape. Date: October 29, 1954. INEEL negative no. 12711 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  14. 3. View of reinforced concrete and through truss eleveated rightofway, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. View of reinforced concrete and through truss eleveated right-of-way, Shaker Rapid Transit, at E. 80th St in Cleveland. Constructed ca. 1920. - Shaker Heights Rapid Transit Line, Cleveland, Cuyahoga County, OH

  15. Response Spectrum Analysis of Reinforced Concrete Buildings

    NASA Astrophysics Data System (ADS)

    Chandak, N. R.

    2012-05-01

    In this work, a parametric study on reinforced concrete (RC) structural walls and moment resisting frames building representative of structural types using response spectrum method is carried out. Here, the design spectra recommended by Indian Standard Code [1] and two other well known codes (Uniform Building Code, Euro Code 8) have been considered for comparison. The main objective of this study is to investigate the differences caused by the use of different codes in the dynamic analysis of multistoried RC building. Three different floor plans that are symmetric (SB), monosymmetric (MB), and unsymmetric (UB) with torsional irregularity are taken as sample buildings. To evaluate the seismic response of the buildings, elastic analysis was performed by using response spectrum method using the computer program SAP2000. Periods, base shears, lateral displacement and interstory drift, torque located at code defined ground type are comparatively presented. It is observed from the comparative study that the base shear using IS code is higher in all the three buildings, when compared to that of with other codes.

  16. Superelastic SMA-FRP composite reinforcement for concrete structures

    NASA Astrophysics Data System (ADS)

    Wierschem, Nicholas; Andrawes, Bassem

    2010-02-01

    For many years there has been interest in using fiber-reinforced polymers (FRPs) as reinforcement in concrete structures. Unfortunately, due to their linear elastic behavior, FRP reinforcing bars are never considered for structural damping or dynamic applications. With the aim of improving the ductility and damping capability of concrete structures reinforced with FRP reinforcement, this paper studies the application of SMA-FRP, a relatively novel type of composite reinforced with superelastic shape memory alloy (SMA) wires. The cyclic tensile behavior of SMA-FRP composites are studied experimentally and analytically. Tests of SMA-FRP composite coupons are conducted to determine their constitutive behavior. The experimental results are used to develop and calibrate a uniaxial SMA-FRP analytical model. Parametric and case studies are performed to determine the efficacy of the SMA-FRP reinforcement in concrete structures and the key factors governing its behavior. The results show significant potential for SMA-FRP reinforcement to improve the ductility and damping of concrete structures while still maintaining its elastic characteristic, typical of FRP reinforcement.

  17. Material and Flexural Properties of Fiber-reinforced Rubber Concrete

    NASA Astrophysics Data System (ADS)

    Helminger, Nicholas P.

    The purpose of this research is to determine the material properties of rubber concrete with the addition of fibers, and to determine optimal mixture dosages of rubber and fiber in concrete for structural applications. Fiber-reinforced concrete and rubberized concrete have been researched separately extensively, but this research intends to combine both rubber and fiber in a concrete matrix in order to create a composite material, fiber-reinforced rubber concrete (FRRC). Sustainability has long been important in engineering design, but much of the previous research performed on sustainable concrete does not result in a material that can be used for practical purposes. While still achieving a material that can be used for structural applications, economical considerations were given when choosing the proportions and types of constituents in the concrete mix. Concrete mixtures were designed, placed, and tested in accordance with common procedures and standards, with an emphasis on practicality. Properties that were investigated include compressive strength, tensile strength, modulus of elasticity, toughness, and ductility. The basis for determining the optimal concrete mixture is one that is economical, practical, and exhibits ductile properties with a significant strength. Results show that increasing percentages of rubber tend to decrease workability, unit weight, compressive strength, split tensile strength, and modulus of elasticity while the toughness is increased. The addition of steel needle fibers to rubber concrete increases unit weight, compressive strength, split tensile strength, modulus of elasticity, toughness, and ductility of the composite material.

  18. Behaviour of concrete beams reinforced withFRP prestressed concrete prisms

    NASA Astrophysics Data System (ADS)

    Svecova, Dagmar

    The use of fibre reinforced plastics (FRP) to reinforce concrete is gaining acceptance. However, due to the relatively low modulus of FRP, in comparison to steel, such structures may, if sufficient amount of reinforcement is not used, suffer from large deformations and wide cracks. FRP is generally more suited for prestressing. Since it is not feasible to prestress all concrete structures to eliminate the large deflections of FRP reinforced concrete flexural members, researchers are focusing on other strategies. A simple method for avoiding excessive deflections is to provide sufficiently high amount of FRP reinforcement to limit its stress (strain) to acceptable levels under service loads. This approach will not be able to take advantage of the high strength of FRP and will be generally uneconomical. The current investigation focuses on the feasibility of an alternative strategy. This thesis deals with the flexural and shear behaviour of concrete beams reinforced with FRP prestressed concrete prisms. FRP prestressed concrete prisms (PCP) are new reinforcing bars, made by pretensioning FRP and embedding it in high strength grout/concrete. The purpose of the research is to investigate the feasibility of using such pretensioned rebars, and their effect on the flexural and shear behaviour of reinforced concrete beams over the entire loading range. Due to the prestress in the prisms, deflection of concrete beams reinforced with this product is substantially reduced, and is comparable to similarly steel reinforced beams. The thesis comprises both theoretical and experimental investigations. In the experimental part, nine beams reinforced with FRP prestressed concrete prisms, and two companion beams, one steel and one FRP reinforced were tested. All the beams were designed to carry the same ultimate moment. Excellent flexural and shear behaviour of beams reinforced with higher prestressed prisms is reported. When comparing deflections of three beams designed to have the

  19. Assessing corrosion damage in reinforced concrete beams using acoustic emission

    NASA Astrophysics Data System (ADS)

    Yoon, Dong-Jin; Weiss, W. Jason; Prine, David W.; Shah, Surendra P.

    1999-02-01

    The acoustic emission (AE) behavior of reinforced concrete beams tested under flexural loading was investigated to characterize and identify the source of damage. This research was aimed at identifying the characteristic AE response associated with micro-crack development, localized crack propagation, corrosion, and debonding of the reinforcing steel.

  20. Dynamic Stability of a Cylindrical Shell Reinforced by Longitudinal Ribs and a Hollow Cylinder Under the Action of Axial Forces

    NASA Astrophysics Data System (ADS)

    Bakulin, V. N.; Volkov, E. N.; Nedbai, A. Ya.

    2016-05-01

    The dynamic stability of a cylindrical orthotropic shell reinforced by longitudinal ribs and a hollow cylinder under the action of axial forces changing harmonically with time was investigated with regard for the axial contact interaction of the shell with the ribs. A solution of the differential equations defining this process has been obtained in the form of trigonometric series in the angular and time coordinates. A two-term approximation of the Mathieu-Hill equations of motion was used for construction of the main region of instability of the shell. As a result, the problem was reduced to a system of algebraic equations for components of displacements of the shell at the locations of the ribs. The problem for uniformly spaced ribs was solved in the explicit form. A numerical example of this solution is presented.

  1. Monitoring Corrosion of Steel Bars in Reinforced Concrete Structures

    PubMed Central

    Verma, Sanjeev Kumar; Bhadauria, Sudhir Singh; Akhtar, Saleem

    2014-01-01

    Corrosion of steel bars embedded in reinforced concrete (RC) structures reduces the service life and durability of structures causing early failure of structure, which costs significantly for inspection and maintenance of deteriorating structures. Hence, monitoring of reinforcement corrosion is of significant importance for preventing premature failure of structures. This paper attempts to present the importance of monitoring reinforcement corrosion and describes the different methods for evaluating the corrosion state of RC structures, especially hal-cell potential (HCP) method. This paper also presents few techniques to protect concrete from corrosion. PMID:24558346

  2. Estimation of broadband acoustic power due to rib forces on a reinforced panel under turbulent boundary layer-like pressure excitation. II. Applicability and validation.

    PubMed

    Rumerman, M L

    2001-02-01

    The previous paper showed that, when the attachment forces on a rib-reinforced panel subjected to turbulent boundary layer excitation can be considered to radiate independently, the rib-related acoustic power in a broad (e.g., one-third octave) frequency band can be estimated as the product of the average mean squared force, the real part of the radiation admittance of an attachment force, and the number of ribs. This paper shows that the radiation condition is always approximated when the acoustic wavelength is less than twice the rib spacing of a periodically reinforced panel, and generally applies at lower frequencies where the acoustic wavelength is less than four times the rib spacing. The procedure is used to estimate the broadband acoustic power radiated per rib of an infinite periodically reinforced membrane and plate in water, and the results are shown to agree with those of "exact" calculations.

  3. Structural Behavior of Concrete Beams Reinforced with Basalt Fiber Reinforced Polymer (BFRP) Bars

    NASA Astrophysics Data System (ADS)

    Ovitigala, Thilan

    The main challenge for civil engineers is to provide sustainable, environmentally friendly and financially feasible structures to the society. Finding new materials such as fiber reinforced polymer (FRP) material that can fulfill the above requirements is a must. FRP material was expensive and it was limited to niche markets such as space shuttles and air industry in the 1960s. Over the time, it became cheaper and spread to other industries such as sporting goods in the 1980-1990, and then towards the infrastructure industry. Design and construction guidelines are available for carbon fiber reinforced polymer (CFRP), aramid fiber reinforced polymer (AFRP) and glass fiber reinforced polymer (GFRP) and they are currently used in structural applications. Since FRP is linear elastic brittle material, design guidelines for the steel reinforcement are not valid for FRP materials. Corrosion of steel reinforcement affects the durability of the concrete structures. FRP reinforcement is identified as an alternative to steel reinforcement in corrosive environments. Although basalt fiber reinforced polymer (BFRP) has many advantages over other FRP materials, but limited studies have been done. These studies didn't include larger BFRP bar diameters that are mostly used in practice. Therefore, larger beam sizes with larger BFRP reinforcement bar diameters are needed to investigate the flexural and shear behavior of BFRP reinforced concrete beams. Also, shear behavior of BFRP reinforced concrete beams was not yet studied. Experimental testing of mechanical properties and bond strength of BFRP bars and flexural and shear behavior of BFRP reinforced concrete beams are needed to include BFRP reinforcement bars in the design codes. This study mainly focuses on the use of BFRP bars as internal reinforcement. The test results of the mechanical properties of BFRP reinforcement bars, the bond strength of BFRP reinforcement bars, and the flexural and shear behavior of concrete beams

  4. Designing concrete EDS maglev guideways: Power losses in metallic reinforcement

    SciTech Connect

    Beto, D.; Plotkin, D.

    1997-05-01

    Conventional reinforced concrete designs will have to be altered when designing a guideway for a maglev using an electrodynamically suspended (EDS) propulsion system. This type of propulsion system generates large magnetic fields that will develop magnetically induced, circulating eddy currents in any conventional steel reinforcement in close proximity to the magnets. These eddy currents, if large enough, may produce significant power losses that could adversely effect operation of the system. This paper presents a method and explanation for civil engineers to use for estimating the power losses due to the presence of metallic reinforcement. This procedure may be used to help guide future designs in the selection and placement of reinforcing material.

  5. Blast impact behaviour of concrete with different fibre reinforcement

    NASA Astrophysics Data System (ADS)

    Drdlová, Martina; Čechmánek, René; Řídký, Radek

    2015-09-01

    The paper summarizes the results of the development of special concrete intended for the explosion resistance applications, with the emphasis on minimal secondary fragments formation at the explosion. The fine-grained concrete matrix has been reinforced by various types of short dispersed fibers (metallic, mineral and polymer) of different sizes and by their combination and the effect of the fibre reinforcement on the physico-mechanical properties and blast resistance was observed. The concrete prism specimens have been subjected to the determination of mechanical parameters (compressive and flexural strength at quasi-static load). The blast tests were conducted on the slab specimens prepared from selected mixtures. The material characteristics and explosion test data have been used for numerical investigation, which defined the optimal wall composition and dimensions of the concrete element which should resist the explosion defined by type, size, weight and placement of the blast. In the next step the test elements resistance was verified by real explosion test.

  6. Polymer concrete reinforced with recycled-tire fibers: Mechanical properties

    NASA Astrophysics Data System (ADS)

    Martínez-Cruz, E.; Martínez-Barrera, G.; Martínez-López, M.

    2013-06-01

    Polymer Concrete was reinforced with recycled-tire fibers in order to improve the compressive and flexural strength. Polymer concrete specimens were prepared with 70% of silicious sand, 30% of polyester resin and various fiber concentrations (0.3, 0.6, 0.9 and 1.2 vol%). The results show increment of 50% in average of the compressive and flexural strength as well as on the deformation when adding 1.2 vol% of recycled-fibers.

  7. Performance of Straight Steel Fibres Reinforced Alkali Activated Concrete

    NASA Astrophysics Data System (ADS)

    Faris, Meor Ahmad; Bakri Abdullah, Mohd Mustafa Al; Nizar Ismail, Khairul; Muniandy, Ratnasamy; Putra Jaya, Ramadhansyah

    2016-06-01

    This paper focus on the performance of alkali activated concrete produced by using fly ash activated by sodium silicate and sodium hydroxide solutions. These alkali activated concrete were reinforced with straight steel fibres with different weight percentage starting from 0 % up to 5 %. Chemical composition of raw material in the production alkali activated concrete which is fly ash was first identified by using X-ray fluorescence. Results reveal there have an effect of straight steel fibres inclusion to the alkali activated concrete. Highest compressive strength of alkali activated concrete which is 67.72 MPa was obtained when 3 % of straight fibres were added. As well as flexural strength, highest flexural strength which is 6.78 MPa was obtained at 3 % of straight steel fibres inclusions.

  8. Delamination detection in reinforced concrete using thermal inertia

    SciTech Connect

    Del Grande, N K; Durbin, P F

    1998-11-30

    We investigated the feasibility of thermal inertia mapping for bridge deck inspections. Using pulsed thermal imaging, we heat-stimulated surrogate delaminations in reinforced concrete and asphalt-concrete slabs. Using a dual-band infrared camera system, we measured thermal inertia responses of Styrofoam implants under 5 cm of asphalt, 5 cm of concrete, and 10 cm of asphalt and concrete. We compared thermal maps from solar-heated concrete and asphalt-concrete slabs with thermal inertia maps from flash-heated concrete and asphalt-concrete slabs. Thermal inertia mapping is a tool for visualizing and quantifying subsurface defects. Physically, thermal inertia is a measure of the resistance of the bridge deck to temperature change. Experimentally, it is determined from the inverse slope of the surface temperature versus the inverse square root of time. Mathematically, thermal inertia is the square root of the product of thermal conductivity, density, and heat capacity. Thermal inertia mapping distinguishes delaminated decks which have below-average thermal inertias from normal or shaded decks. Key Words: Pulsed Thermal Imaging, Thermal Inertia, Detection Of Concrete Bridgedeck Delaminations

  9. Topological and sizing optimization of reinforced ribs for a machining centre

    NASA Astrophysics Data System (ADS)

    Chen, T. Y.; Wang, C. B.

    2008-01-01

    The topology optimization technique is applied to improve rib designs of a machining centre. The ribs of the original design are eliminated and new ribs are generated by topology optimization in the same 3D design space containing the original ribs. Two-dimensional plate elements are used to replace the optimum rib topologies formed by 3D rectangular elements. After topology optimization, sizing optimization is used to determine the optimum thicknesses of the ribs. When forming the optimum design problem, multiple configurations of the structure are considered simultaneously. The objective is to minimize rib weight. Static constraints confine displacements of the cutting tool and the workpiece due to cutting forces and the heat generated by spindle bearings. The dynamic constraint requires the fundamental natural frequency of the structure to be greater than a given value in order to reduce dynamic deflection. Compared with the original design, the improvement resulting from this approach is significant.

  10. Report on aging of nuclear power plant reinforced concrete structures

    SciTech Connect

    Naus, D.J.; Oland, C.B.; Ellingwood, B.R.

    1996-03-01

    The Structural Aging Program provides the US Nuclear Regulatory Commission with potential structural safety issues and acceptance criteria for use in continued service assessments of nuclear power plant safety-related concrete structures. The program was organized under four task areas: Program Management, Materials Property Data Base, Structural Component Assessment/Repair Technology, and Quantitative Methodology for Continued Service Determinations. Under these tasks, over 90 papers and reports were prepared addressing pertinent aspects associated with aging management of nuclear power plant reinforced concrete structures. Contained in this report is a summary of program results in the form of information related to longevity of nuclear power plant reinforced concrete structures, a Structural Materials Information Center presenting data and information on the time variation of concrete materials under the influence of environmental stressors and aging factors, in-service inspection and condition assessments techniques, repair materials and methods, evaluation of nuclear power plant reinforced concrete structures, and a reliability-based methodology for current and future condition assessments. Recommendations for future activities are also provided. 308 refs., 61 figs., 50 tabs.

  11. CORROSION PROCESS IN REINFORCED CONCRETE IDENTIFIED BY ACOUSTIC EMISSION

    NASA Astrophysics Data System (ADS)

    Kawasaki, Yuma; Kitaura, Misuzu; Tomoda, Yuichi; Ohtsu, Masayasu

    Deterioration of Reinforced Concrete (RC) due to salt attack is known as one of serious problems. Thus, development of non-destructive evaluation (NDE) techniques is important to assess the corrosion process. Reinforcement in concrete normally does not corrode because of a passive film on the surface of reinforcement. When chloride concentration at reinfo rcement exceeds the threshold level, the passive film is destroyed. Thus maintenance is desirable at an early stage. In this study, to identify the onset of corrosion and the nucleation of corrosion-induced cracking in concrete due to expansion of corrosion products, continuous acoustic emission (AE) monitoring is applied. Accelerated corrosion and cyclic wet and dry tests are performed in a laboratory. The SiGMA (Simplified Green's functions for Moment tensor Analysis) proce dure is applied to AE waveforms to clarify source kinematics of micro-cracks locations, types and orientations. Results show that the onset of corrosion and the nu cleation of corrosion-induced cracking in concrete are successfully identified. Additionally, cross-sections inside the reinforcement are observed by a scanning electron microscope (SEM). From these results, a great promise for AE techniques to monitor salt damage at an early stage in RC structures is demonstrated.

  12. 8. WEST FLAME DEFLECTOR FROM REINFORCED CONCRETE SLAB ROOF, FORMER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. WEST FLAME DEFLECTOR FROM REINFORCED CONCRETE SLAB ROOF, FORMER DRAINAGE AREA IN THE DISTANCE, VIEW TOWARDS NORTHWEST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-1, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  13. RETENTION BASIN. ERECTING REINFORCING STEEL FOR CONCRETE DECK. STACK RISES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    RETENTION BASIN. ERECTING REINFORCING STEEL FOR CONCRETE DECK. STACK RISES AT TOP LEFT. CAMERA FACES WEST. INL NEGATIVE NO. 2581. Unknown Photographer, 6/18/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  14. Analysis of polarization decay of reinforced concrete in saltwater

    SciTech Connect

    Kumar, A.; Boy, J.H.

    1996-11-01

    Electrochemical impedance spectroscopy (EIS), polarization resistance, and polarization decay measurements techniques were used to analyze uncoated steel reinforcing rods encased in concrete and exposed to saltwater. A nested equivalent circuit containing a Warburg impedance was utilized to analyze the results. When rust is present on the steel, the Warburg impedance dominated the impedance response.

  15. Modeling Blast Loading on Buried Reinforced Concrete Structures with Zapotec

    DOE PAGES

    Bessette, Greg C.

    2008-01-01

    A coupled Euler-Lagrange solution approach is used to model the response of a buried reinforced concrete structure subjected to a close-in detonation of a high explosive charge. The coupling algorithm is discussed along with a set of benchmark calculations involving detonations in clay and sand.

  16. Perspective view. Fivestory reinforced concrete factory building reveals the structural ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Perspective view. Five-story reinforced concrete factory building reveals the structural frame on the exterior of the facade. Twelve bay facade facing onto Clay Avenue (north facade) has first floor openings bricked up. Mix of typical factory windows and glass block windows fill the majority of the openings on the rest of building - Russell Industrial Center, 1600 Clay Avenue, Detroit, MI

  17. 3. DRAINING & DRYING BUILDING, REINFORCED CONCRETE MUSHROOM COLUMNS WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. DRAINING & DRYING BUILDING, REINFORCED CONCRETE MUSHROOM COLUMNS WITH DROP PANELS SUPPORTING DRAINING BINS (IRON VALVES OF DRAINING BINS ARE EMBEDDED IN THE CEILING), VIEW LOOKING WEST - Mill "C" Complex, Sand Draining & Drying Building, South of Dee Bennet Road, near Illinois River, Ottawa, La Salle County, IL

  18. 9. Photocopy of Reinforced Concrete Details drawing (from the BPA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Photocopy of Reinforced Concrete Details drawing (from the BPA Engineering Vault, Drawing C13-J2-342-D1, Sheet 6, 13 March 1939) - Bonneville Power Administration South Bank Substation, I-84, South of Bonneville Dam Powerhouse, Bonneville, Multnomah County, OR

  19. 10. Interior view looking SE showing reinforced concrete structural system ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Interior view looking SE showing reinforced concrete structural system at ground floor of Paint Shop. - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Paint & Coach Barn, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

  20. Fracture of concrete caused by the reinforcement corrosion products

    NASA Astrophysics Data System (ADS)

    Nguyen, Q. T.; Millard, A.; Caré, S.; L'Hostis, V.; Berthaud, Y.

    2006-11-01

    One of the most current degradations in reinforced concrete structures is related to the corrosion of the reinforcements. The corrosion products during active corrosion induce a mechanical pressure on the surrounding concrete that leads to cover cracking along the rebar. The objective of this work is to study the cracking of concrete due to the corrosion of the reinforcements. The phenomenon of corrosion/cracking is studied in experiments through tests of accelerated corrosion on plate and cylindrical specimens. A CCD camera is used to take images every hour and the pictures are analyzed by using the intercorrelation image technique (Correli^LMT) to derive the displacement and strain field. Thus the date of appearance of the first through crack is detected and the cinematic crack initiations are observed during the test. A finite element model that allows prediction of the mechanical consequences of the corrosion of steel in reinforced concrete structures is proposed. From the comparison between the test results and numerical simulations, it may be concluded that the model is validated in term of strains up to the moment when the crack becomes visible, and in terms of crack pattern.

  1. 3. Occident Terminal Elevator. Reinforced concrete. First total "electric" elevator ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Occident Terminal Elevator. Reinforced concrete. First total "electric" elevator at Duluth. (Powered by electrical substation instead of steam generator). - Occident Terminal Elevator & Storage Annex, South side of second slip, north from outer end of Rice's Point, east of Garfield Avenue, Duluth, St. Louis County, MN

  2. Investigation of Mechanical Properties of Steel Fibre- Reinforced Concrete

    NASA Astrophysics Data System (ADS)

    Ryabchikov, A.; Tamme, V.; Laurson, M.

    2015-11-01

    Steel fibre-reinforced concrete (SFRC) is widely used in the structural elements of buildings: industrial floors, slabs, walls, foundation, etc. When a load is applied to a fibre- reinforced composite consisting of a low-modulus matrix reinforced with high-strength, high- modulus fibres, the plastic flow of the matrix under stress transfers the load to the fibre; this results in high-strength, high-modulus material which determines the stiffness and stress of the composite. In this study the equivalent flexural strength, equivalent flexural ratio Re,3 and the compressing strength of SFRC are investigated. Notched test specimens with five different dosages of steel fibres (20, 25, 30, 35, 40 kg/m3) were prepared using industrial concrete. Determination of flexural tension strength was carried out according to the EU norm EVS-EN 14651:2005+A1:2007. The equivalent flexural strength and subsequent equivalent flexural ratio Re,3 of SFRC with a dosage of 20, 25, 30, 35 kg/m3 similar to their average values and with a dosage of 40 kg/m3 were 31% higher than their average values. The compressive strength of the steel fibre-reinforced concrete was slightly higher compared to plain concrete, except specimens with the dosage of 40 kg/m3 where the increase was 30%.

  3. Prediction of residual shear strength of corroded reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Imam, Ashhad; Azad, Abul Kalam

    2016-09-01

    With the aim of providing experimental data on the shear capacity and behavior of corroded reinforced concrete beams that may help in the development of strength prediction models, the test results of 13 corroded and four un-corroded beams are presented. Corrosion damage was induced by accelerated corrosion induction through impressed current. Test results show that loss of shear strength of beams is mostly attributable to two important damage factors namely, the reduction in stirrups area due to corrosion and the corrosion-induced cracking of concrete cover to stirrups. Based on the test data, a method is proposed to predict the residual shear strength of corroded reinforced concrete beams in which residual shear strength is calculated first by using corrosion-reduced steel area alone, and then it is reduced by a proposed reduction factor, which collectively represents all other applicable corrosion damage factors. The method seems to yield results that are in reasonable agreement with the available test data.

  4. Delamination detection in reinforced concrete using thermal inertia

    NASA Astrophysics Data System (ADS)

    DelGrande, Nancy; Durbin, Philip F.

    1999-02-01

    We investigated the feasibility of thermal inertia mapping for bridge deck inspections. Using pulsed thermal imaging, we heat-stimulated surrogate delaminations in reinforced concrete and asphalt-concrete slabs. Using a dual-band infrared camera system, we measured thermal inertia responses of Styrofoam implants under 5 cm of asphalt, 5 cm of concrete, and 10 cm of asphalt and concrete. We compared thermal maps from solar-heated concrete and asphalt-concrete slabs with thermal inertia maps from flash-heated concrete and asphalt-concrete slabs. Thermal inertia mapping is a tool for visualizing and quantifying subsurface defects. Physically, thermal inertia is a measure of the resistance of the bridge deck to temperature change. Experimentally, it is determined from the inverse slope of the surface temperature versus the inverse square root of time. Mathematically, thermal inertia is the square root of the product of thermal conductivity, density, and heat capacity. Thermal inertia mapping distinguishes delaminated decks which have below-average thermal inertias from normal or shaded decks.

  5. Refinement of the Upper and Lower Bounds of Effective Heat Conductivity Coefficients of Rib-Reinforced Composite Media

    NASA Astrophysics Data System (ADS)

    Yankovskii, A. P.

    2016-07-01

    We propose two refined structural models of the thermal behavior of a rib-reinforced composite medium at general anisotropy of the materials of compound components. For the criterion of equivalence of the rib-reinforced composite to the fictitious homogeneous anisotropic material, equality of the specific heat dissipation in them was used, which permits determining the upper and lower bounds of the effective heat conductivity coefficients of the composite material. The design values of the effective heat conductivity coefficients of a honeycomb structure with cavities filled and not filled with foam plastic have been determined. It has been shown that the refinement of certain thermal characteristics of 12%, and the refined "fork" of values of these quantities, does not exceed 2.5%. Indirect comparison has been made between the calculated and experimental values of the effective heat conductivity coefficients of such compounds, which has shown that the results obtained in the work are qualitatively reliable.

  6. Design of the IXO optics based on thin glass plates connected by reinforcing ribs

    NASA Astrophysics Data System (ADS)

    Parodi, G.; Martelli, F.; Basso, S.; Citterio, O.; Civitani, M.; Conconi, P.; Ghigo, M.; Pareschi, G.; Zambra, A.

    2011-09-01

    Effective area requirements for the large X-ray mirror of the International X-ray Observatory (IXO) are about 3 m2 at 1keV, 0.65 m2 at 6 keV and 150 cm2 at 30 keV. Because of its large dimension, the telescope cannot be realized as a monolithic structure but rather it requires the integration and assembly in the telescope optical bench of a number of basic module units, called X-ray Optical Unit (XOU). We are currently studying a method for the production of these basic units that is based on the slumping technology for the production of thin glass segmented mirrors. It foresees the implementation of a stacking integration concept based on the use of reinforcing ribs connecting the glass segments in order to create very stiff structures. This paper reports on the last design of the single optical module and describe the results of FEM analyses that show how it is possible to use an innovative approach to the integration of the slumped glass foils.

  7. Code System for Analysis of 3-D Reinforced Concrete Structures.

    1999-11-22

    Version 00 NONSAP-C is a finite element program for determining the static and dynamic response of three-dimensional reinforced concrete structures. Long-term, or creep, behavior of concrete structures can also be analyzed. Nonlinear constitutive relations for concrete under short-term loads are incorporated in two time-independent models, a variable-modulus approach with orthotropic behavior induced in the concrete due to the development of different tangent moduli in different directions and an elastic-plastic model in which the concrete ismore » assumed to be a continuous, isotropic, and linearly elastic-plastic strain-hardening-fracture material. A viscoelastic constitutive model for long-term thermal creep of concrete is included. Three-dimensional finite elements available in NONSAP-C include a truss element, a multinode tendon element for prestressed and post tensioned concrete structures, an elastic-plastic membrane element to represent the behavior of cavity liners, and a general isoparametric element with a variable number of nodes for analysis of solids and thick shells.« less

  8. New Fiber Reinforced Waterless Concrete for Extraterrestrial Structural Applications

    NASA Technical Reports Server (NTRS)

    Toutanji, H.; Tucker, D.; Ethridge, E.

    2005-01-01

    Commercial use of sulfur concrete on Earth is well established, particularly in corrosive, e.g., acid and salt, environments. Having found troilite (FeS) on the Moon raises the question of using extracted sulfur as a lunar construction mate: iii an attractive alternative to conventional concrete as it does not require water For the purpose of this paper it is assumed that lunar ore is mined, refined, and the raw sulfur processed with appropriate lunar regolith to form, for example, brick and beam elements. Glass fibers produced from regolith were used as a reinforcement to improve the mechanical properties of the sulfur concrete. Glass fibers and glass rebar were produced by melting the lunar regolith simulant. Lunar regolith stimulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline 46100 high temperature MoSi2 furnace at melting temperatures of 1450 to 1600G. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The viability of sulfur concrete as a construction material for extraterrestrial application is presented. The mechanical properties of the glass fiber reinforced sulfur concrete were investigated.

  9. Behaviour of fibre reinforced polymer confined reinforced concrete columns under fire condition

    NASA Astrophysics Data System (ADS)

    Chowdhury, Ershad Ullah

    In recent years, fibre reinforced polymer (FRP) materials have demonstrated enormous potential as materials for repairing and retrofitting concrete bridges that have deteriorated from factors such as electro-chemical corrosion and increased load requirements. However, concerns associated with fire remain an obstacle to applications of FRP materials in buildings and parking garages due to FRP's sensitivity to high temperatures as compared with other structural materials and to limited knowledge on their thermal and mechanical behaviour in fire. This thesis presents results from an ongoing study on the fire performance of FRP materials, fire insulation materials and systems, and FRP wrapped reinforced concrete columns. The overall goal of the study is to understand the fire behaviour of FRP materials and FRP strengthened concrete columns and ultimately, provide rational fire safety design recommendations and guidelines for FRP strengthened concrete columns. A combined experimental and numerical investigation was conducted to achieve the goals of this research study. The experimental work consisted of both small-scale FRP material testing at elevated temperatures and full-scale fire tests on FRP strengthened columns. A numerical model was developed to simulate the behaviour of unwrapped reinforced concrete and FRP strengthened reinforced concrete square or rectangular columns in fire. After validating the numerical model against test data available in literature, it was determined that the numerical model can be used to analyze the behaviour of concrete axial compressive members in fire. Results from this study also demonstrated that although FRP materials experience considerable loss of their mechanical and bond properties at temperatures somewhat below the glass transition temperature of the resin matrix, externally-bonded FRP can be used in strengthening concrete structural members in buildings, if appropriate supplemental fire protection system is provided over

  10. Advance study of fiber-reinforced self-compacting concrete

    SciTech Connect

    Mironova, M. Ivanova, M. Naidenov, V.; Georgiev, I.; Stary, J.

    2015-10-28

    Incorporation in concrete composition of steel macro- and micro – fiber reinforcement with structural function increases the degree of ductility of typically brittle cement-containing composites, which in some cases can replace completely or partially conventional steel reinforcement in the form of rods and meshes. Thus, that can reduce manufacturing, detailing and placement of conventional reinforcement, which enhances productivity and economic efficiency of the building process. In this paper, six fiber-reinforced with different amounts of steel fiber cement-containing self-compacting compositions are investigated. The results of some of their main strength-deformation characteristics are presented. Advance approach for the study of structural and material properties of these type composites is proposed by using the methods of industrial computed tomography. The obtained original tomography results about the microstructure and characteristics of individual structural components make it possible to analyze the effective macro-characteristics of the studied composites. The resulting analytical data are relevant for the purposes of multi-dimensional modeling of these systems. Multifactor structure-mechanical analysis of the obtained with different methods original scientific results is proposed. It is presented a conclusion of the capabilities and effectiveness of complex analysis in the studies to characterize the properties of self-compacting fiber-reinforced concrete.

  11. Advance study of fiber-reinforced self-compacting concrete

    NASA Astrophysics Data System (ADS)

    Mironova, M.; Ivanova, M.; Naidenov, V.; Georgiev, I.; Stary, J.

    2015-10-01

    Incorporation in concrete composition of steel macro- and micro - fiber reinforcement with structural function increases the degree of ductility of typically brittle cement-containing composites, which in some cases can replace completely or partially conventional steel reinforcement in the form of rods and meshes. Thus, that can reduce manufacturing, detailing and placement of conventional reinforcement, which enhances productivity and economic efficiency of the building process. In this paper, six fiber-reinforced with different amounts of steel fiber cement-containing self-compacting compositions are investigated. The results of some of their main strength-deformation characteristics are presented. Advance approach for the study of structural and material properties of these type composites is proposed by using the methods of industrial computed tomography. The obtained original tomography results about the microstructure and characteristics of individual structural components make it possible to analyze the effective macro-characteristics of the studied composites. The resulting analytical data are relevant for the purposes of multi-dimensional modeling of these systems. Multifactor structure-mechanical analysis of the obtained with different methods original scientific results is proposed. It is presented a conclusion of the capabilities and effectiveness of complex analysis in the studies to characterize the properties of self-compacting fiber-reinforced concrete.

  12. Mixed Consolidation Solution for a Reinforced Concrete Structure

    NASA Astrophysics Data System (ADS)

    Lute, M.

    2016-06-01

    During the last years, reinforced concrete structures become subject for rehabilitation due to two factors: their long life span and large change in norms that leaded to a large increase of seismic loads in Eastern Europe. These lead to a necessity for rehabilitation of existing building stock in order to use them during their entire life span at the maximum potential. The present paper proposes a solution for rehabilitation for three reinforced concrete building of a hospital, that consumed a half of their life span and do not correspond anymore to present norms. The chosen solution is a combination between CFRP rehabilitation and increase of structural elements cross section in order to achieve the stiffness balance in the structure nodes that is required by present norms. As a further matter, correction in stiffness of local elements diminished the lateral drifts of the structure and improved the global seismic response of the building.

  13. Glass fiber reinforced concrete for terrestrial photovoltaic arrays

    NASA Technical Reports Server (NTRS)

    Maxwell, H.

    1979-01-01

    The use of glass-fiber-reinforced concrete (GRC) as a low-cost structural substrate for terrestrial solar cell arrays is discussed. The properties and fabrication of glass-reinforced concrete structures are considered, and a preliminary design for a laminated solar cell assembly built on a GRC substrate is presented. A total cost for such a photovoltaic module, composed of a Korad acrylic plastic film front cover, an aluminum foil back cover, an ethylene/vinyl acetate pottant/adhesive and a cotton fabric electrical isolator in addition to the GRC substrate, of $9.42/sq m is projected, which is less than the $11.00/sq m cost goal set by the Department of Energy. Preliminary evaluations are concluded to have shown the design capabilities and cost effectiveness of GRC; however, its potential for automated mass production has yet to be evaluated.

  14. 83. ARAIII. A blast wall of reinforced concrete separated the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    83. ARA-III. A blast wall of reinforced concrete separated the GCRE control room from the reactor. Blast wall goes up at left of view. Camera stands at the southwest corner of the control building (ARA-607) and faces east. October 14, 1958. Ineel photo no. 58-5085. Photographer: Jack L. Anderson. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  15. Perspective view. The threestory reinforced concrete building faced with brick ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Perspective view. The three-story reinforced concrete building faced with brick has direct frontage onto neighboring railroad line. The facade says: "The Fairmont Creamery Company" in white stone. The facade is divided into bays by large brick piers capped with a square accent piece. A large stone band runs just above the windows and between the second and third floors - The Fairmont Creamery Company, 608 East Milwaukee Avenue, Detroit, MI

  16. View from intersection. Ninestory reinforced concrete building infilled with brick. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View from intersection. Nine-story reinforced concrete building infilled with brick. The street facades on beaubien and east grand are faced with stone accents and elaborate brick work. Brick pilasters run the entire height of the building. Steel tiebacks are apparent running up the height of the building on the east side. The large tower appears at the northeast and southeast corners - Detroit Storage Company, 2937 East Grand Boulevard, Detroit, MI

  17. Crack detection and leakage monitoring on reinforced concrete pipe

    NASA Astrophysics Data System (ADS)

    Feng, Qian; Kong, Qingzhao; Huo, Linsheng; Song, Gangbing

    2015-11-01

    Reinforced concrete underground pipelines are some of the most widely used types of structures in water transportation systems. Cracks and leakage are the leading causes of pipeline structural failures which directly results in economic losses and environmental hazards. In this paper, the authors propose a piezoceramic based active sensing approach to detect the cracks and the further leakage of concrete pipelines. Due to the piezoelectric properties, piezoceramic material can be utilized as both the actuator and the sensor in the active sensing approach. The piezoceramic patch, which is sandwiched between protective materials called ‘smart aggregates,’ can be safely embedded into concrete structures. Circumferential and axial cracks were investigated. A wavelet packet-based energy analysis was developed to distinguish the type of crack and determine the further leakage based on different stress wave energy attenuation propagated through the cracks.

  18. Failure analysis of an Oregon coast reinforced concrete bridge

    SciTech Connect

    Holcomb, Gordon R.; Covino, Bernard S., Jr.; Cramer, Stephen D.; Bullard, Sophie J.; Russell, James H.; Soltesz, S.M.

    2001-01-01

    The coastal highway along the Oregon coast contains many reinforced concrete bridges constructed between 1925 and 1955. Chloride-induced corrosion resulted in the need for the rehabilitation or replacement of a number of these bridges. A failure analysis of the Rocky Point Viaduct (built in 1954, patched in 1969, replaced in 1994) is presented. Analysis included powder sampling and profiling of Cl concentration, determining the permeable void fraction in the concrete, and measuring rebar half cell potentials. Insufficient concrete cover over the shear stirrups was the major factor in the premature failure of the Viaduct. The time required for corrosion initiation and cracking was modeled by calculating diffusion parameters (surface Cl concentration (Co) and diffusion coefficient (D)) from Cl profiles. The model was used to examine the relative ineffectiveness of the patch repairs by showing increased Cl transport in the patch due to both higher Co and D values.

  19. Interfacial chemistry of zinc anodes for reinforced concrete structures

    SciTech Connect

    Covino, B.S. Jr.; Bullard, S.J.; Cramer, S.D.; Holcomb, G.R.; McGill, G.E.; Cryer, C.B.; Stoneman, A.; Carter, R.R.

    1997-12-01

    Thermally-sprayed zinc anodes are used in both galvanic and impressed current cathodic protection systems for reinforced concrete structures. The Albany Research Center, in collaboration with the Oregon Department of Transportation, has been studying the effect of electrochemical aging on the bond strength of zinc anodes for bridge cathodic protection systems. Changes in anode bond strength and other anode properties can be explained by the chemistry of the zinc-concrete interface. The chemistry of the zinc-concrete interface in laboratory electrochemical aging studies is compared with that of several bridges with thermal-sprayed zinc anodes and which have been in service for 5 to 10 years using both galvanic and impressed current cathodic protection systems. The bridges are the Cape Creek Bridge on the Oregon coast and the East Camino Undercrossing near Placerville, CA. Also reported are interfacial chemistry results for galvanized steel rebar from the 48 year old Longbird Bridge in Bermuda.

  20. Corrosion of reinforced concrete in the Persian Gulf region

    SciTech Connect

    Novokshchenov, V.

    1995-01-01

    The Kuwait liquefied gas/sulfur (LGS) plant is located on a small island in the southern part of the Persian Gulf. The plant was built in phases between 1973 and 1977. Designed to manufacture liquefied natural and petroleum gas and to extract sulfur, the LGS plant consists of two similar process unit trains served by a common boiler and utility plant. The major reinforced-concrete structures at the plant include the cooling water outfall, the cooling water intake, the operations building, structures supporting elevated pipe and equipment, boiler stack foundations, bridge over the flume, the loading jetty, sulfur plant structures, substations, and storage tank foundations. The first signs of distress in the plant structures were reported in 1980: cracking, spalling, and delamination of concrete cover and corrosion of reinforcing steel. In some cases, deterioration had progressed to the extent that safety and life expectancy of the structures were at risk. Subsequently, several investigations were conducted on various structures from 1980 to 1987 to identify the causes of the deterioration. The principal cause of the deterioration was corrosion of reinforcing steel caused by the presence of chlorides; marine salts were the main source. Construction-related contributing factors included insufficient concrete cover, use of sulfate-resistant (ASTM Type V) portland cement, and an elevated water-to-cement ratio.

  1. Inspection of reinforced concrete samples by Compton backscattering technique

    NASA Astrophysics Data System (ADS)

    Boldo, E. M.; Appoloni, C. R.

    2014-02-01

    Reinforced concrete structures require frequent monitoring to ensure the concrete quality during its service life and for evaluation of in situ existing conditions. Compton backscattering of gamma rays is a nondestructive technique used for material characterization and detection of defects and inclusions in materials and can be employed on reinforced concrete. The methodology allows one-sided inspection of large structures, is relatively inexpensive and can be portable. The concept is based on detection of backscattered radiation produced from a collimated beam aimed at the sample. By measuring the spectrum of these scattered gamma rays it is possible to determine local density perturbations. In this work we used the Compton backscattering technique to locate and measure steel, defects and crushed stone inside concrete. The samples were irradiated with gamma rays from a Ø2 mm diameter collimated 241Am (100 mCi) source and the inelastically scattered photons were recorded at an angle of 135° by a high resolution CdTe semiconductor detector. Scanning was achieved by lateral movement of the sample blocks across the source and detector field of view in steps of 1 mm. A previous optimization of the experimental setup was performed with Monte Carlo simulation. The results showed that it was possible to locate inclusions and defects with Ø8 mm positioned at a depth of 20 mm below the surface of the sample. It was observed that aggregates such as crushed stone could mask defects at specific points due to high attenuation of the incident and scattered beam.

  2. Numerical simulation of monitoring corrosion in reinforced concrete based on ultrasonic guided waves.

    PubMed

    Zheng, Zhupeng; Lei, Ying; Xue, Xin

    2014-01-01

    Numerical simulation based on finite element method is conducted to predict the location of pitting corrosion in reinforced concrete. Simulation results show that it is feasible to predict corrosion monitoring based on ultrasonic guided wave in reinforced concrete, and wavelet analysis can be used for the extremely weak signal of guided waves due to energy leaking into concrete. The characteristic of time-frequency localization of wavelet transform is adopted in the corrosion monitoring of reinforced concrete. Guided waves can be successfully used to identify corrosion defects in reinforced concrete with the analysis of suitable wavelet-based function and its scale. PMID:25013865

  3. Numerical Simulation of Monitoring Corrosion in Reinforced Concrete Based on Ultrasonic Guided Waves

    PubMed Central

    Zheng, Zhupeng; Lei, Ying; Xue, Xin

    2014-01-01

    Numerical simulation based on finite element method is conducted to predict the location of pitting corrosion in reinforced concrete. Simulation results show that it is feasible to predict corrosion monitoring based on ultrasonic guided wave in reinforced concrete, and wavelet analysis can be used for the extremely weak signal of guided waves due to energy leaking into concrete. The characteristic of time-frequency localization of wavelet transform is adopted in the corrosion monitoring of reinforced concrete. Guided waves can be successfully used to identify corrosion defects in reinforced concrete with the analysis of suitable wavelet-based function and its scale. PMID:25013865

  4. The Behaviour of Reinforced Concrete Subjected to Reversed Cyclic Shear

    NASA Astrophysics Data System (ADS)

    Ruggiero, David Michael Volpe

    Reversed cyclic loading, as may occur during seismic events, can cause sudden and brittle shear failures in reinforced concrete structural members. This thesis presents both experimental and analytical investigations into the behaviour of members subjected to reversed cyclic shear loading, and culminates in the development of a new, rational model to describe this behaviour. In the experimental phase of the research, ten reinforced concrete shell elements were tested under reversed cyclic in-plane shear loads. Data collected by means of several acquisition systems allowed extensive analysis of the experiments, and provided insight into the behaviour of the crack interfaces. In comparison with existing models, such as the Modified Compression Field Theory, it was found that the shear strengths of these reversed cyclically loaded specimens were as much as 25% lower than monotonic predictions. The results of the experimental program informed the development of a new analytical model, the General Crack Component Model (GCCM). The central concept of the GCCM is that the reversed cyclic behaviour of a shear panel depends on the behaviour of multiple crack systems, each with its own constitutive properties. A rigorous framework based on the principles of compatibility and equilibrium was formulated in order to allow for the appropriate combination of the stiffnesses of the three components of the model: concrete, steel, and cracks. The GCCM was validated for reversed cyclic and monotonic loading by comparison with the experimental results as well as data from other researchers. It was shown that the model provides good estimates of the behaviour of reinforced concrete subjected to reversed cyclic loads, and that it can be used as part of a larger structural analysis, ultimately helping engineers to design safer structures and more accurately assess the safety of existing construction.

  5. Seismic retrofitting of reinforced concrete frame structures using GFRP-tube-confined-concrete composite braces

    NASA Astrophysics Data System (ADS)

    Moghaddasi B., Nasim S.; Zhang, Yunfeng; Hu, Xiaobin

    2012-03-01

    This paper presents a new type of structural bracing intended for seismic retrofitting use in framed structures. This special composite brace, termed glass-fiber-reinforced-polymer (GFRP)-tube-confined-concrete composite brace, is comprised of concrete confined by a GFRP tube and an inner steel core for energy dissipation. Together with a contribution from the GFRP-tube confined concrete, the composite brace shows a substantially increased stiffness to control story drift, which is often a preferred feature in seismic retrofitting. An analysis model is established and implemented in a general finite element analysis program — OpenSees, for simulating the load-displacement behavior of the composite brace. Using this model, a parametric study of the hysteretic behavior (energy dissipation, stiffness, ductility and strength) of the composite brace was conducted under static cyclic loading and it was found that the area ratio of steel core to concrete has the greatest influence among all the parameters considered. To demonstrate the application of the composite brace in seismic retrofitting, a three-story nonductile reinforced concrete (RC) frame structure was retrofitted with the composite braces. Pushover analysis and nonlinear time-history analyses of the retrofitted RC frame structure was performed by employing a suite of 20 strong ground motion earthquake records. The analysis results show that the composite braces can effectively reduce the peak seismic responses of the RC frame structure without significantly increasing the base shear demand.

  6. Estimation of broadband acoustic power due to rib forces on a reinforced panel under turbulent boundary layer-like pressure excitation. I. Derivations using string model.

    PubMed

    Rumerman, M L

    2001-02-01

    This paper shows that, when the attachment forces on a rib-reinforced panel subjected to turbulent boundary layer (TBL) excitation can be considered to radiate independently, the rib-related acoustic power in a broad (e.g., one-third octave) frequency band can be estimated as the product of the average mean-squared force, the real part of the radiation admittance of an attachment force, and the number of ribs. Using a simple model of a string with point mass or spring attachments, an approach is developed for estimating the average mean-squared force in broad frequency bands. The results are in a form that can be applied to ribbed plates and shells. The following paper establishes the condition under which the ribs can be considered to radiate independently, and presents the results of validating calculations for steel plates in water.

  7. Life cycle CO{sub 2} evaluation on reinforced concrete structures with high-strength concrete

    SciTech Connect

    Tae, Sungho; Baek, Cheonghoon Shin, Sungwoo

    2011-04-15

    The purpose of this study is to evaluate the environment performance of high-strength concrete used in super tall buildings as material of environmental load reduction. To this end, this study proposed a plan for the evaluation of energy consumption and CO{sub 2} emission throughout the life cycle of the building, and calculated the energy consumption and CO{sub 2} emission throughout the life cycle of tall apartment building that was actually constructed using this plan. Then, we evaluated the energy consumption and CO{sub 2} emission reduction performance for the life cycle of the building by the decrease of concrete and reinforced rebar quantities and the increase of building lifespan obtained through conversion of existing building's concrete compressive strength to 40 MPa high-strength concrete. As a result, the life cycle energy consumption in case 3, a high-strength concrete building, decreased 15.53% and 2.95% respectively compared with cases 1 and 2. The evaluation of the general strength concrete buildings and the life cycle CO{sub 2} emission also decreased 16.70% and 3.37% respectively, compared with cases 1 and 2.

  8. Evaluation of Concrete Consolidation: DSS-35 Antenna Reinforced Concrete Pedestal, Canberra Deep Space Communications Complex, Australia

    NASA Astrophysics Data System (ADS)

    Saldua, B. P.; Dodge, E. C.; Kolf, P. R.; Olson, C. A.

    2016-02-01

    Antenna structures for the Deep Space Network track spacecraft that are millions of miles away. Therefore, these structures have tight specifications for translation, rotation, and differential settlement. This article presents several nondestructive test methods that were used to evaluate, locate, and repair imperfections in the reinforced concrete pedestal that supports the DSS-35 antenna structure. These methods include: (1) impulse response (IR), (2) ultrasonic shear-wave tomography (MIRA), and (3) ground-penetrating radar (GPR).

  9. Durability Studies on Confined Concrete using Fiber Reinforced Polymer

    NASA Astrophysics Data System (ADS)

    Ponmalar, V.; Gettu, R.

    2014-06-01

    In this study, 24 concrete cylinders with a notch at the centre were prepared. Among them six cylinders were wrapped using single and double layers of fiber reinforced polymer; six cylinders were coated with epoxy resin; the remaining cylinders were used as a control. The cylinders were exposed to wet and dry cycling and acid (3 % H2SO4) solution for the period of 120 days. Two different concrete strengths M30 and M50 were considered for the study. It is found that the strength, ductility and failure mode of wrapped cylinders depend on number of layers and the nature of exposure conditions. It was noticed that the damage due to wet and dry cycling and acid attack was severe in control specimen than the epoxy coated and wrapped cylinders.

  10. CONCRETE POURS HAVE PRODUCED A REINFORCED SUPPORT BASE FOR MTR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CONCRETE POURS HAVE PRODUCED A REINFORCED SUPPORT BASE FOR MTR REACTOR. PIPE TUNNEL IS UNDER CONSTRUCTION AT CENTER OF VIEW. PIPES WILL CARRY RADIOACTIVE WATER FROM REACTOR TO WATER PROCESS BUILDING. CAMERA LOOKS SOUTH INTO TUNNEL ALONG WEST SIDE OF REACTOR BASE. TWO CAISSONS ARE AT LEFT SIDE OF VIEW. NOTE "WINDOW" IN SOUTH FACE OF REACTOR BASE AND ALSO GROUP OF PENETRATIONS TO ITS LEFT. INL NEGATIVE NO. 733. Unknown Photographer, 10/6/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  11. Perspective view of threestory reinforced concrete factory. The factory is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Perspective view of three-story reinforced concrete factory. The factory is painted pink with factory windows infilling the structural frame exposed on the exterior facade. On the east facade of the three-story factory is a two-story, seven bay addition that is painted the same tone as the larger factory. The last two bays of the two-story addition are newer. A brick base surrounds both the factory and the addition and runs the entire length of the building on Clay Ave. and Morrow St. (Duplicate Color view of HAER MI-334-1) - Ivan Doverspike Company, 1925 Clay Avenue, Detroit, MI

  12. Perspective view of threestory reinforced concrete factory. The factory is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Perspective view of three-story reinforced concrete factory. The factory is painted pink with factory windows infilling the structural frame exposed on the exterior facade. On the east facade of the three-story factory is a two-story, seven bay addition that is painted the same tone as the larger factory. The last two bays of the two-story addition are newer. A brick base surrounds both the factory and the addition and runs the entire length of the building on Clay Ave. and Morrow St - Ivan Doverspike Company, 1925 Clay Avenue, Detroit, MI

  13. Postcrack creep of polymeric fiber-reinforced concrete in flexure

    SciTech Connect

    Kurtz, S.; Balaguru, P.

    2000-02-01

    Results of an experimental investigation of the creep-time behavior of polypropylene and nylon fiber-reinforced concrete (FRC) are presented. Gravity loads were applied in flexure to precracked low volume fraction (0.1%) polypropylene and nylon FRC beams. Beams were tested at a range of stress levels to produce three outcomes: load sustained indefinitely (low stress), creep failure (intermediate stress), and rapid failure (high stress). Emphasis was placed on determining the maximum flexural stress that is sustainable indefinitely. The results indicate that polypropylene FRC has higher initial strength but nylon FRC can sustain a higher stress level. For both groups the sustainable stress is much lower than the postcrack strength.

  14. Yield Line Evaluation Methodology for Reinforced Concrete Structures

    1998-12-30

    Yield line theory is an analytical technique that can be used to determine the ultimate bending capacity of flat reinforced concrete plates subject to distributed and concentrated loadings. Alternately, yield line theory, combined with rotation limits can be used to determine the energy absorption capacity of plates subject to impulsive and impact loadings. Typical components analyzed by yield line theory are basemats, floor and roof slabs subject to vertical loads along with walls subject tomore » out of plane loadings. One limitation of yield line theory is that it is computationally difficult to evaluate some mechanisms. This problem is aggravated by the complex geometry and reinforcing layouts commonly found in practice. The program has the capability to either evaluate a single user defined mechanism or to iterate over a range of mechanisms to determine the minimum ultimate capacity. The program is verified by comparison to a series of yield line mechanisms with known solutions.« less

  15. Numerical Study Of The Effects Of Preloading, Axial Loading And Concrete Shrinkage On Reinforced Concrete Elements Strengthened By Concrete Layers And Jackets

    SciTech Connect

    Lampropoulos, A. P.; Dritsos, S. E.

    2008-07-08

    In this study, the technique of seismic strengthening existing reinforced concrete columns and beams using additional concrete layers and jackets is examined. The finite element method and the finite element program ATENA is used in this investigation. When a reinforced jacket or layer is being constructed around a column it is already preloaded due to existing service loads. This effect has been examined for different values of the axial load normalized to the strengthened column. The techniques of strengthening with a concrete jacket or a reinforced concrete layer on the compressive side of the column are examined. Another phenomenon that is examined in this study is the shrinkage of the new concrete of an additional layer used to strengthen an existing member. For this investigation, a simply supported beam with an additional reinforced concrete layer on the tensile side is examined. The results demonstrate that the effect of preloading is important when a reinforced concrete layer is being used with shear connectors between the old and the new reinforcement. It was also found that the shrinkage of the new concrete reduces the strength of the strengthened beam and induces an initial sliding between the old and the new concrete.

  16. Acoustic emission of fire damaged fiber reinforced concrete

    NASA Astrophysics Data System (ADS)

    Mpalaskas, A. C.; Matikas, T. E.; Aggelis, D. G.

    2016-04-01

    The mechanical behavior of a fiber-reinforced concrete after extensive thermal damage is studied in this paper. Undulated steel fibers have been used for reinforcement. After being exposed to direct fire action at the temperature of 850°C, specimens were subjected to bending and compression in order to determine the loss of strength and stiffness in comparison to intact specimens and between the two types. The fire damage was assessed using nondestructive evaluation techniques, specifically ultrasonic pulse velocity (UPV) and acoustic emission (AE). Apart from the strong, well known, correlation of UPV to strength (both bending and compressive), AE parameters based mainly on the frequency and duration of the emitted signals after cracking events showed a similar or, in certain cases, better correlation with the mechanical parameters and temperature. This demonstrates the sensitivity of AE to the fracture incidents which eventually lead to failure of the material and it is encouraging for potential in-situ use of the technique, where it could provide indices with additional characterization capability concerning the mechanical performance of concrete after it subjected to fire.

  17. Parameterization of Damage in Reinforced Concrete Structures Using Model Updating

    NASA Astrophysics Data System (ADS)

    ABDEL WAHAB, M. M.; DE ROECK, G.; PEETERS, B.

    1999-12-01

    This paper describes the application of finite element model updating to reinforced concrete beams in order to detect and quantify damage. Three simply supported beams are considered in this study: two of them are subjected to a single concentrated load while the third one to two concentrated loads. The static loading system is applied in different steps up to failure so that dynamic measurements can be carried out after each load step. The measured modal parameters are used afterwards to update a finite element model in order to localize and to quantify the damage. The updating algorithm is based on the sensitivity approach in which the discrepancies between the analytical and experimental modal data are minimized in an iterative manner. A new concept for damage parametrization is introduced. A damage function characterized by three parameters is proposed. In such a function, only three parameters are used to describe the damage pattern of the reinforced concrete beams. These parameters are related to the bending stiffness of the beams and updated so that the measured natural frequencies are reproduced. The results demonstrate the efficiency of the proposed technique to quantify the damage pattern.

  18. Alternate anode materials for cathodic protection of steel reinforced concrete

    SciTech Connect

    Russell, James H.; Bullard, Sophie J.; Covino, Bernard S., Jr.; Cramer, Stephen D.; Holcomb, Gordon R.; Cryer, Curtis B.

    2001-01-01

    Consumable and non-consumable anodes were evaluated in the laboratory for use in cathodic protection (CP) systems for steel reinforced concrete bridges in coastal environments and in areas where deicing salts are employed. The anode materials included Zn-hydrogel and thermal-sprayed Zn, Zn-15Al, Al-12Zn-0.2In, and cobalt-sprayed Ti. These anodes were evaluated for service in both galvanic (GCP) and impressed current (ICCP) cathodic protection systems. Impressed current CP anodes were electrochemically aged at a current density 15 times as great as that used by the Oregon Department of Transportation in typical coastal ICCP systems (2.2 mA/m2 based on anode area). Increasing moisture at the anode-concrete interface reduced the operating voltage of all the anodes. Bond strength between the anodes and concrete decreased with electrochemical aging. The Zn-15Al and Al-12Zn-0.2In anodes provided adequate protection in GCP but their life was too short in the accelerated ICCP tests. Zinc had an adequate life in ICCP tests but was inadequate as a galvanic anode. Zinc-hydrogel performed well in both tests when the hydrogel was kept moist. Titanium was an excellent anode for ICCP, but is not suitable for GCP.

  19. Flexural retrofitting of reinforced concrete structures using Green Natural Fiber Reinforced Polymer plates

    NASA Astrophysics Data System (ADS)

    Cervantes, Ignacio

    An experimental study will be carried out to determine the suitability of Green Natural Fiber Reinforced Polymer plates (GNFRP) manufactured with hemp fibers, with the purpose of using them as structural materials for the flexural strengthening of reinforced concrete (RC) beams. Four identical RC beams, 96 inches long, are tested for the investigation, three control beams and one test beam. The first three beams are used as references; one unreinforced, one with one layer of Carbon Fiber Reinforced Polymer (CFRP), one with two layers of CFRP, and one with n layers of the proposed, environmental-friendly, GNFRP plates. The goal is to determine the number of GNFRP layers needed to match the strength reached with one layer of CFRP and once matched, assess if the system is less expensive than CFRP strengthening, if this is the case, this strengthening system could be an alternative to the currently used, expensive CFRP systems.

  20. Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams

    SciTech Connect

    Khan, Inamullah; François, Raoul; Castel, Arnaud

    2014-02-15

    This paper studies the evolution of reinforcement corrosion in comparison to corrosion crack width in a highly corroded reinforced concrete beam. Cracking and corrosion maps of the beam were drawn and steel reinforcement was recovered from the beam to observe the corrosion pattern and to measure the loss of mass of steel reinforcement. Maximum steel cross-section loss of the main reinforcement and average steel cross-section loss between stirrups were plotted against the crack width. The experimental results were compared with existing models proposed by Rodriguez et al., Vidal et al. and Zhang et al. Time prediction models for a given opening threshold are also compared to experimental results. Steel cross-section loss for stirrups was also measured and was plotted against the crack width. It was observed that steel cross-section loss in the stirrups had no relationship with the crack width of longitudinal corrosion cracks. -- Highlights: •Relationship between crack and corrosion of reinforcement was investigated. •Corrosion results of natural process and then corresponds to in-situ conditions. •Comparison with time predicting model is provided. •Prediction of load-bearing capacity from crack pattern was studied.

  1. Non-traditional shape GFRP rebars for concrete reinforcement

    NASA Astrophysics Data System (ADS)

    Claure, Guillermo G.

    The use of glass-fiber-reinforced-polymer (GFRP) composites as internal reinforcement (rebars) for concrete structures has proven to be an alternative to traditional steel reinforcement due to significant advantages such as magnetic transparency and, most importantly, corrosion resistance equating to durability and structural life extension. In recent years, the number of projects specifying GFRP reinforcement has increased dramatically leading the construction industry towards more sustainable practices. Typically, GFRP rebars are similar to their steel counterparts having external deformations or surface enhancements designed to develop bond to concrete, as well as having solid circular cross-sections; but lately, the worldwide composites industry has taken advantage of the pultrusion process developing GFRP rebars with non-traditional cross-sectional shapes destined to optimize their mechanical, physical, and environmental attributes. Recently, circular GFRP rebars with a hollow-core have also become available. They offer advantages such as a larger surface area for improved bond, and the use of the effective cross-sectional area that is engaged to carry load since fibers at the center of a solid cross-section are generally not fully engaged. For a complete understanding of GFRP rebar physical properties, a study on material characterization regarding a quantitative cross-sectional area analysis of different GFRP rebars was undertaken with a sample population of 190 GFRP specimens with rebar denomination ranging from #2 to #6 and with different cross-sectional shapes and surface deformations manufactured by five pultruders from around the world. The water displacement method was applied as a feasible and reliable way to conduct the investigation. In addition to developing a repeatable protocol for measuring cross-sectional area, the objectives of establishing critical statistical information related to the test methodology and recommending improvements to

  2. Thermal nondestructive testing (TNDT) of adhesively bonded composite reinforcements applied to concrete civil structures

    NASA Astrophysics Data System (ADS)

    Burleigh, Douglas D.; Bohner, Richard

    1999-02-01

    Thermographic nondestructive testing was performed on composite reinforcements applied to two concrete civil structures. Information on the types of defects which occur in these structures and their locations has led to process improvements in the application of adhesively bonded laminated composites to steel reinforce concrete structures.

  3. 78 FR 55755 - Steel Concrete Reinforcing Bar From Mexico and Turkey; Institution of Antidumping and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... amended. The amendments took effect on November 7, 2011. See 76 FR 61937 (Oct. 6, 2011) and the newly... COMMISSION Steel Concrete Reinforcing Bar From Mexico and Turkey; Institution of Antidumping and... from Mexico and Turkey of steel concrete reinforcing bar, primarily provided for in subheadings...

  4. Evaluating cover depth of steel fiber reinforced concrete using impact-echo testing

    NASA Astrophysics Data System (ADS)

    Lin, Yu-Feng

    2014-04-01

    The purpose of this research is to estimate of the cover depth of steel fiber reinforced concrete using the impact-echo testing. In order to evaluate the security of the construction, usually need to estimate the cover depth of the reinforced concrete. At present, the examination technique of the cover depth of the reinforced concrete without the steel fiber is mainly applied in the magnetic and electrical methods, its rapid detection and good results. But the research of the reactive powder concrete be gradually progress, with the steel fiber concrete structure will be increased, if should still operate the examination with the magnetic and electrical methods, theoretically the steel fiber will have the interference to its electromagnetism field. Therefore, this research designs four kinds of reinforced concrete plate that include different steel fiber contents, to evaluate test results of estimate of the cover depth of the reinforcing bar. The results showed that: estimate of the cover depth of steel fiber reinforced concrete reinforcing bar using the impact-echo testing, the variety of the steel fiber content does not have much influence, the test measurement error within ± 10%, and the most important source of uncertainty is the velocity of concrete.

  5. The behavior of reinforced concrete knee joints under earthquake loads

    NASA Astrophysics Data System (ADS)

    Angelakos, Bill

    The poor performance of knee joint connections during recent earthquakes motivated a number of experimental investigations of knee joint behavior under reversed cyclic loading. In this work the knee joint design problem is studied through a collective evaluation of the available experimental results and analytical modeling. The objective is to identify the critical response variables controlling the mechanics of knee joints under earthquake loads and to quantify the influence they have on the strength and deformation capacity of the joint. A knee joint model is derived from simple mechanical constructs of equilibrium and compatibility. The parametric dependence of knee joint behavior is investigated for critical design parameters such as concrete strength, amounts and yield strengths of horizontal and vertical transverse reinforcement, and bond demand. Three different limiting equations are developed from the model limiting the joint shear resistance according with the three alternative modes of joint shear failure. These are: (i) yielding of horizontal and vertical transverse reinforcement, (ii) and (iii) yielding in either of the two principal reinforcing directions accompanied by crushing of the concrete in compression (here the softening influence of orthogonal tensile deformations is considered). For those test specimens from the experimental database that experienced a joint shear failure, the simple knee joint model predicts their joint shear capacity well. Consistent with observations from interior connections it is shown that anchorage of the main reinforcement in the knee joint region prevails as the determining factor of the response of the joint panel. In addition, the same basic physical model that describes the source of resistance in interior connections also applies to knee joints; truss action, and diagonal strut action. By favorably anchoring the beam and column bars it is possible to develop the joint shear strength which is associated with one

  6. Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash

    SciTech Connect

    Kayali, O.; Haque, M.N.; Zhu, B.

    1999-11-01

    Lightweight aggregate concretes containing fly ash with a compressive strength between 61 to 67 NPa were produced. The lightweight aggregate used was sintered fly ash. The concretes were reinforced with either polypropylene or steel fibres. The fibres did not affect the compressive strength, but did increase the tensile strength of these concretes. The modulus of elasticity of all the lightweight concretes tested was about 21 GPa, compared to 35 GPa for the normal-weight concrete. Fibre reinforcement did not affect the value of the elastic modulus. This type of lightweight concrete, containing fly ash as 23% of the total cementitious content, resulted in long-term shrinkage that is nearly twice as large as normal-weight concrete of somewhat similar strength. Polypropylene fibre reinforcement did not reduce drying shrinkage, while steel fibres did. Early shrinkage behavior of this type of lightweight concrete was similar to normal-weight concrete. However, the rate of shrinkage of the lightweight concrete remained constant until nearly 100 days of drying. This is different from normal-weight concrete that showed appreciably after 56 days. Shrinkage of normal-weight concrete stabilized after 400 days, which shrinkage of lightweight concrete did not appear to stabilize after a similar period of continuous drying.

  7. Analyses of a Reinforced Concrete Containment with Liner Corrosion Damage

    SciTech Connect

    Cherry, J.L.; Smith, J.A.

    1998-11-19

    Incidents of liner corrosion in nuclear power containment structures have been recorded. These incidents and concerns of other possible liner corrosion in containment have prompted an interest in determining g the capacity of a degraded containment. Finite element analyses of a typical pressurized water reactor (PWR) reinforced concrete containment with liner corrosion were conducted using the A13AQUS finite element code with the ANACAP-U nonlinear concrete constitutive model. The effect of liner corrosion on containment capacity was investigated. A loss of coolant accident was simulated by applying pressure and temperature changes to the structure without corrosion to determine baseline failure limits, followed by multiple analyses of the containment with corrosion at different locations and varying degrees of liner degradation. The corrosion locations were chosen at the base of the containment wall, near the equipment hatch, and at the midheight of the containment wall. Using a strain-based failure criterion the different scenarios were evaluated to prioritize their effect on containment capacity

  8. Humectant use in the cathodic protection of reinforced concrete

    SciTech Connect

    Holcomb, G.R.; Covino, B.S. Jr.; Russell, J.H.; Bullard, S.J.; Cramer, S.D.; Collins, W.K.; Bennett, J.E.; H.M. Laylor

    2000-03-01

    The use of humectants to improve the thermal-sprayed zinc anode performance during the cathodic protection (CP) of reinforced concrete is examined. A humectant is a hygroscopic material. It is applied onto the surface of the zinc anode to keep the concrete-anode interface moist and a good conductor. The thermodynamics of humectants are discussed. Laboratory results are presented on the effects of using LiBr and LiNO{sub 3} as humectants in galvanic (GCP) and impressed current (ICCP) systems, in high and low relative humidities, and on new and previously electrochemically aged CP systems. LiNO{sub 3} and LiBr promoted more effective CP performance. Both improved the performance of aged slabs, suggesting that application of humectants onto existing CP systems would be of benefit. Microscopy showed that humectant-treated slabs develop the same cement-reaction zone-zinc anode structures as untreated slabs. Microscopy of LiBr-treated slabs revealed that the highest concentration of bromide was in the reaction zone. In GCP tests, LiBr was more effective than LiNO{sub 3}. In accelerated ICCP tests, LiNO{sub 3} was more effective than LiBr. It was surmised that bromide could be oxidized in the high-voltage accelerated ICCP tests. At the lower impressed currents of most installed ICCP systems, LiBr may perform as well as or better than LiNO{sub 3}.

  9. Humectant use in the cathodic protection of reinforced concrete

    SciTech Connect

    Holcomb, Gordon R.; Covino, Bernard S., Jr.; Russell, James H.; Bullard, Sophie J.; Cramer, Stephen D.; Collins, W.K.; Bennett, J.E.; Laylor, H.M.

    2000-11-01

    Use of humectants to improve the thermal-sprayed zinc anode performance during the cathodic protection (CP) of reinforced concrete was examined. A humectant is a hygroscopic material. It is applied onto the surface of the zinc anode to keep the concrete-anode interface moist and a good conductor. The thermodynamics of humectants are discussed. Laboratory results are presented on the effects of using lithium bromide (LiBr) and lithium nitrate (LiNO{sub 3}) as humectants in galvanic cathodic protection (GCP) and impressed current cathodic protection (ICCP) systems, in high and low relative humidities, and on new and previously electrochemically aged CP systems. LiNO{sub 3} and LiBr promoted more effective CP performance. Both improved the performance of aged slabs, suggesting that application of humectants onto existing CP systems would be of benefit. Microscopy showed that humectant-treated slabs develop the same cement-reaction zone, zinc anode structures as untreated slabs. Microscopy of LiBr-treated slabs revealed that the highest concentration of bromide was in the reaction zone. In GCP tests, LiBr was more effective than LiNO{sub 3}. In accelerated ICCP tests, LiNO{sub 3} was more effective than LiBr. It was surmised that bromide could be oxidized in the high-voltage accelerated ICCP tests. At the lower impressed currents of most installed ICCP systems, LiBr may perform as well as or better than LiNO{sub 3}.

  10. Physical vulnerability of reinforced concrete buildings impacted by snow avalanches

    NASA Astrophysics Data System (ADS)

    Bertrand, D.; Naaim, M.; Brun, M.

    2010-07-01

    This paper deals with the assessment of physical vulnerability of civil engineering structures to snow avalanche loadings. In this case, the vulnerability of the element at risk is defined by its damage level expressed on a scale from 0 (no damage) to 1 (total destruction). The vulnerability of a building depends on its structure and flow features (geometry, mechanical properties, type of avalanche, topography, etc.). This makes it difficult to obtain vulnerability relations. Most existing vulnerability relations have been built from field observations. This approach suffers from the scarcity of well documented events. Moreover, the back analysis is based on both rough descriptions of the avalanche and the structure. To overcome this problem, numerical simulations of reinforced concrete structures loaded by snow avalanches are carried out. Numerical simulations allow to study, in controlled conditions, the structure behavior under snow avalanche loading. The structure is modeled in 3-D by the finite element method (FEM). The elasto-plasticity framework is used to represent the mechanical behavior of both materials (concrete and steel bars) and the transient feature of the avalanche loading is taken into account in the simulation. Considering a reference structure, several simulation campaigns are conducted in order to assess its snow avalanches vulnerability. Thus, a damage index is defined and is based on global and local parameters of the structure. The influence of the geometrical features of the structure, the compressive strength of the concrete, the density of steel inside the composite material and the maximum impact pressure on the damage index are studied and analyzed. These simulations allow establishing the vulnerability as a function of the impact pressure and the structure features. The derived vulnerability functions could be used for risk analysis in a snow avalanche context.

  11. Continuous acoustic emission monitoring of reinforced concrete under accelerated corrosion

    NASA Astrophysics Data System (ADS)

    Di Benedetti, M.; Loreto, G.; Nanni, A.; Matta, F.; Gonzalez-Nunez, M. A.

    2011-04-01

    The development of techniques capable of evaluating deterioration of reinforced concrete (RC) structures is instrumental to the advancement of techniques for the structural health monitoring (SHM) and service life estimate for constructed facilities. One of the main causes leading to degradation of RC is the corrosion of the steel reinforcement. This process can be modeled phenomenologically, while laboratory tests aimed at studying durability responses are typically accelerated in order to provide useful results within a realistic period of time. To assess the condition of damage in RC, a number of nondestructive methods have been recently studied. Acoustic emission (AE) is emerging as a nondestructive tool to detect the onset and progression of deterioration mechanisms. In this paper, the development of accelerated corrosion and continuous AE monitoring test set-up for RC specimens are presented. Relevant information are provided with regard to the characteristics of the corrosion circuit, continuous measurement and acquisition of corrosion potential, selection of AE sensors and AE parameter setting. The effectiveness of the setup in detecting and characterizing the initiation and progression of the corrosion phenomenon is discussed on the basis of preliminary results from small-scale, pre-cracked RC specimens, which are representative of areas near the clear cover in typical RC bridge members.

  12. Preparation and characterization of glass fibers - polymers (epoxy) bars (GFRP) reinforced concrete for structural applications

    NASA Astrophysics Data System (ADS)

    Alkjk, Saeed; Jabra, Rafee; Alkhater, Salem

    2016-06-01

    The paper presents some of the results from a large experimental program undertaken at the Department of Civil Engineering of Damascus University. The project aims to study the ability to reinforce and strengthen the concrete by bars from Epoxy polymer reinforced with glass fibers (GFRP) and compared with reinforce concrete by steel bars in terms of mechanical properties. Five diameters of GFRP bars, and steel bars (4mm, 6mm, 8mm, 10mm, 12mm) tested on tensile strength tests. The test shown that GFRP bars need tensile strength more than steel bars. The concrete beams measuring (15cm wide × 15cm deep × and 70cm long) reinforced by GFRP with 0.5 vol.% ratio, then the concrete beams reinforced by steel with 0.89 vol.% ratio. The concrete beams tested on deflection test. The test shown that beams which reinforced by GFRP has higher deflection resistance, than beams which reinforced by steel. Which give more advantage to reinforced concrete by GFRP.

  13. Evaluation of passivation method and corrosion inhibitors for steel-reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Brown, Richard; Lee, K. Wayne; Cao, Yong

    1999-02-01

    Corrosion of reinforcing steel due to the ingression of chloride ions from deicing salt and/or seawater has been a major cause of the deterioration of reinforced concrete structures. Typically reinforcing steel is protected from corrosion by the formation of passive film because of highly alkaline concrete environment. The film can be damaged with the introduction of chloride ions to concrete, then corrosion occurs. There are mainly three approaches to tackle this problem, i.e., protective coating, cathodic protection and corrosion inhibitors.

  14. Vertical impedance measurements on concrete bridge decks for assessing susceptibility of reinforcing steel to corrosion

    NASA Astrophysics Data System (ADS)

    Bartholomew, Paul D.; Guthrie, W. Spencer; Mazzeo, Brian A.

    2012-08-01

    Corrosion is a pressing problem for aging concrete infrastructure, especially bridge decks. Because of its sensitivity to factors that affect corrosion of reinforcing steel in concrete, resistivity is an important structural health indicator for reinforced concrete structures. In this research, an instrument was developed to measure vertical impedance on concrete bridge decks. Measurements of vertical impedance on slabs prepared in the laboratory, on slabs removed from decommissioned bridge decks, and on an in-service bridge deck in the field demonstrate the utility of the new apparatus.

  15. Design guidelines for steel-reinforced polymer concrete using resins based on recycled PET

    SciTech Connect

    Rebeiz, K.S.; Fowler, D.W.

    1996-10-01

    Very little research has been done on the structural behavior of steel-reinforced polymer concrete (PC). In all the previous studies, it was generally assumed that the structural behavior of reinforced PC is similar to the structural behavior of reinforced portland cement concrete because both are composite materials consisting of a binder and inorganic aggregates. However, the design equations developed for steel-reinforced portland cement concrete yield very conservative results when applied to reinforced PC. The objective of this paper is to recommend simple, yet effective design guidelines in shear and flexure for steel-reinforced PC. The recommended design procedures are mostly based on test results performed on PC beams using resins based on recycled poly(ethyleneterephthalate), PET, plastic waste (the PET waste is mainly recovered from used beverage bottles). Previous studies have shown that polyester resins based on recycled PET can produce very good quality PC at a potentially lower cost.

  16. The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement

    SciTech Connect

    Butler, L. West, J.S.; Tighe, S.L.

    2011-10-15

    The purpose of this study was to investigate the influence that replacing natural coarse aggregate with recycled concrete aggregate (RCA) has on concrete bond strength with reinforcing steel. Two sources of RCA were used along with one natural aggregate source. Numerous aggregate properties were measured for all aggregate sources. Two types of concrete mixture proportions were developed replacing 100% of the natural aggregate with RCA. The first type maintained the same water-cement ratios while the second type was designed to achieve the same compressive strengths. Beam-end specimens were tested to determine the relative bond strength of RCA and natural aggregate concrete. On average, natural aggregate concrete specimens had bond strengths that were 9 to 19% higher than the equivalent RCA specimens. Bond strength and the aggregate crushing value seemed to correlate well for all concrete types.

  17. Digital fast neutron radiography of steel reinforcing bar in concrete

    NASA Astrophysics Data System (ADS)

    Mitton, K.; Jones, A.; Joyce, M. J.

    2014-12-01

    Neutron imaging has previously been used in order to test for cracks, degradation and water content in concrete. However, these techniques often fall short of alternative non-destructive testing methods, such as γ-ray and X-ray imaging, particularly in terms of resolution. Further, thermal neutron techniques can be compromised by the significant expense associated with thermal neutron sources of sufficient intensity to yield satisfactory results that can often precipitate the need for a reactor. Such embodiments are clearly not portable in the context of the needs of field applications. This paper summarises the results of a study to investigate the potential for transmission radiography based on fast neutrons. The objective of this study was to determine whether the presence of heterogeneities in concrete, such as reinforcement structures, could be identified on the basis of variation in transmitted fast-neutron flux. Monte-Carlo simulations have been performed and the results from these are compared to those arising from practical tests using a 252Cf source. The experimental data have been acquired using a digital pulse-shape discrimination system that enables fast neutron transmission to be studied across an array of liquid scintillators placed in close proximity to samples under test, and read out in real time. Whilst this study does not yield sufficient spatial resolution, a comparison of overall flux ratios does provide a basis for the discrimination between samples with contrasting rebar content. This approach offers the potential for non-destructive testing that gives less dose, better transportability and better accessibility than competing approaches. It is also suitable for thick samples where γ-ray and X-ray methods can be limited.

  18. An experiment on the use of disposable plastics as a reinforcement in concrete beams

    NASA Technical Reports Server (NTRS)

    Chowdhury, Mostafiz R.

    1992-01-01

    Illustrated here is the concept of reinforced concrete structures by the use of computer simulation and an inexpensive hands-on design experiment. The students in our construction management program use disposable plastic as a reinforcement to demonstrate their understanding of reinforced concrete and prestressed concrete beams. The plastics used for such an experiment vary from plastic bottles to steel reinforced auto tires. This experiment will show the extent to which plastic reinforcement increases the strength of a concrete beam. The procedure of using such throw-away plastics in an experiment to explain the interaction between the reinforcement material and concrete, and a comparison of the test results for using different types of waste plastics are discussed. A computer analysis to simulate the structural response is used to compare the test results and to understand the analytical background of reinforced concrete design. This interaction of using computers to analyze structures and to relate the output results with real experimentation is found to be a very useful method for teaching a math-based analytical subject to our non-engineering students.

  19. Fracture Behavior and Properties of Functionally Graded Fiber-Reinforced Concrete

    SciTech Connect

    Roesler, Jeffery; Bordelon, Amanda; Gaedicke, Cristian; Park, Kyoungsoo; Paulino, Glaucio

    2008-02-15

    In concrete pavements, a single concrete mixture design is selected to resist mechanical loading without attempting to adversely affect the concrete pavement shrinkage, ride quality, or noise attenuation. An alternative approach is to design distinct layers within the concrete pavement surface which have specific functions thus achieving higher performance at a lower cost. The objective of this research was to address the structural benefits of functionally graded concrete materials (FGCM) for rigid pavements by testing and modeling the fracture behavior of different combinations of layered plain and synthetic fiber-reinforced concrete materials. Fracture parameters and the post-peak softening behavior were obtained for each FGCM beam configuration by the three point bending beam test. The peak loads and initial fracture energy between the plain, fiber-reinforced, and FGCM signified similar crack initiation. The total fracture energy indicated improvements in fracture behavior of FGCM relative to full-depth plain concrete. The fracture behavior of FGCM depended on the position of the fiber-reinforced layer relative to the starter notch. The fracture parameters of both fiber-reinforced and plain concrete were embedded into a finite element-based cohesive zone model. The model successfully captured the experimental behavior of the FGCMs and predicted the fracture behavior of proposed FGCM configurations and structures. This integrated approach (testing and modeling) demonstrates the viability of FGCM for designing layered concrete pavements system.

  20. Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams

    NASA Astrophysics Data System (ADS)

    Nanni, F.; Auricchio, F.; Sarchi, F.; Forte, G.; Gusmano, G.

    2006-02-01

    In this paper testing carried out on concrete beams reinforced with self-sensing composite rods is presented. Such concrete beams, whose peculiarity is to be reinforced by self-sensing materials able to generate an alarm signal when fixed loads are reached, were designed, manufactured and tested. The reinforcing rods were manufactured by pultrusion and consisted of self-sensing hybrid composites containing both glass and carbon fibres in an epoxy resin. The experimentation was carried out by performing simultaneously mechanical tests on the reinforced beams and electrical measurements on the composite rods. The results showed that the developed system reached the target proposed, giving an alarm signal.

  1. Modelling Dowel Action of Discrete Reinforcing Bars in Cracked Concrete Structures

    SciTech Connect

    Kwan, A. K. H.; Ng, P. L.; Lam, J. Y. K.

    2010-05-21

    Dowel action is one of the component actions for shear force transfer in cracked reinforced concrete. In finite element analysis of concrete structures, the use of discrete representation of reinforcing bars is considered advantageous over the smeared representation due to the relative ease of modelling the bond-slip behaviour. However, there is very limited research on how to simulate the dowel action of discrete reinforcing bars. Herein, a numerical model for dowel action of discrete reinforcing bars crossing cracks in concrete is developed. The model features the derivation of dowel stiffness matrix based on beam-on-elastic-foundation theory and the direct assemblage of dowel stiffness into the concrete element stiffness matrices. The dowel action model is incorporated in a nonlinear finite element programme with secant stiffness formulation. Deep beams tested in the literature are analysed and it is found that the incorporation of dowel action model improves the accuracy of analysis.

  2. Modelling Dowel Action of Discrete Reinforcing Bars in Cracked Concrete Structures

    NASA Astrophysics Data System (ADS)

    Kwan, A. K. H.; Ng, P. L.; Lam, J. Y. K.

    2010-05-01

    Dowel action is one of the component actions for shear force transfer in cracked reinforced concrete. In finite element analysis of concrete structures, the use of discrete representation of reinforcing bars is considered advantageous over the smeared representation due to the relative ease of modelling the bond-slip behaviour. However, there is very limited research on how to simulate the dowel action of discrete reinforcing bars. Herein, a numerical model for dowel action of discrete reinforcing bars crossing cracks in concrete is developed. The model features the derivation of dowel stiffness matrix based on beam-on-elastic-foundation theory and the direct assemblage of dowel stiffness into the concrete element stiffness matrices. The dowel action model is incorporated in a nonlinear finite element programme with secant stiffness formulation. Deep beams tested in the literature are analysed and it is found that the incorporation of dowel action model improves the accuracy of analysis.

  3. Evaluation of post-fire strength of concrete flexural members reinforced with glass fiber reinforced polymer (GFRP) bars

    NASA Astrophysics Data System (ADS)

    Ellis, Devon S.

    Owing to their corrosion resistance and superior strength to weight ratio, there has been, over the past two decades, increased interest in the use of fiber-reinforced polymer (FRP) reinforcing bars in reinforced concrete structural members. The mechanical behavior of FRP reinforcement differs from that of steel reinforcement. For example, FRP reinforcement exhibit a linear stress-strain behavior until the bar ruptures and the strength, stiffness and bond properties of FRP reinforcement are affected more adversely by elevated temperatures. All structures are subject to the risk of damage by fire and fires continue to be a significant cause of damage to structures. Many structures do not collapse after being exposed to fire. The safety of the structure for any future use is dependent on the ability to accurately estimate the post-fire load capacity of the structure. Assuming that the changes, due to fire exposure, in the mechanical behavior of the GFRP reinforcing bar and concrete, and the bond between the reinforcing bar and the concrete are understood, an analytical procedure for estimating the post-fire strength of GFRP reinforced concrete flexural elements can be developed. This thesis investigates the changes in: a) tensile properties and bond of GFRP bars; and b) the flexural behavior of GFRP reinforced concrete beams flexural after being exposed to elevated temperatures up to 400°C and cooled to ambient temperature. To this end, twelve tensile tests, twelve pullout bond tests and ten four-point beam tests were performed. The data from the tests were used to formulate analytical procedures for evaluating the post-fire strength of GFRP reinforced concrete beams. The procedure produced conservative results when compared with the experimental data. In general, the residual tensile strength and modulus of elasticity of GFRP bars decrease as the exposure temperature increases. The loss in properties is however, smaller than that observed by other researchers when

  4. Atmospheric rusting of rebars and its effect on reinforced concrete corrosion

    SciTech Connect

    Mehmood, T.; Absan, S.N.; Al-Mughidi, M.S.

    1998-12-31

    Steel concrete reinforcing bars are known to rust on open storage, particularly in humid environments. Rebar manufactured through different technologies exhibit varying rusting tendency and hence have increased the confusion about their use in concrete. Published literature mainly deals with effect of rust on rebars` mechanical properties and concrete bond strength. Little work has been reported on the corrosion behavior of rusted rebars in concrete, Present paper compares the atmospheric rusting behavior of rebars produced through different processes and effect of degree of rust on rebars` corrosion behavior in concrete.

  5. Application of bamboo for flexural and shear reinforcement in concrete beams

    NASA Astrophysics Data System (ADS)

    Schneider, Nathan Alan

    As the developing world is industrializing and people migrate to cities, the need for infrastructure is growing quickly and concrete has become one of the most widely used construction materials. One poor construction practice observed widely across the developing world is the minimal use of reinforcement for concrete structures due to the high cost of steel. As a low-cost, high-performance material with good mechanical properties, bamboo has been investigated as an alternative to steel for reinforcing concrete. The goal of this research is to add to the knowledge base of bamboo reinforced concrete (BRC) by investigating a unique stirrup design and testing the lap-splicing of flexural bamboo reinforcement in concrete beams. Component tests on the mechanical properties of Moso bamboo (Phyllostachys edulis) were performed, including tensile tests and pull-out tests. The results of the component tests were used to design and construct 13 BRC beams which were tested under monotonic gravity loading in 3 and 4-point bending tests. Three types of beams were designed and tested, including shear controlled, flexure controlled, and lap-spliced flexure controlled beams. The test results indicated that bamboo stirrups increased unreinforced concrete beam shear capacities by up to 259%. The flexural bamboo increased beam capacities by up to 242% with an optimal reinforcement ratio of up to 3.9%, assuming sufficient shear capacity. Limitations of the bamboo reinforcement included water absorption as well as poor bonding capability to the concrete. The test results show that bamboo is a viable alternative to steel as tensile reinforcement for concrete as it increases the ultimate capacity of the concrete, allows for high deflections and cracks, and provides warning of impending structural failure.

  6. Experimental data of the static behavior of reinforced concrete beams at room and low temperature.

    PubMed

    Mirzazadeh, M Mehdi; Noël, Martin; Green, Mark F

    2016-06-01

    This article provides data on the static behavior of reinforced concrete at room and low temperature including, strength, ductility, and crack widths of the reinforced concrete. The experimental data on the application of digital image correlation (DIC) or particle image velocimetry (PIV) in measuring crack widths and the accuracy and precision of DIC/PIV method with temperature variations when is used for measuring strains is provided as well.

  7. Experimental data of the static behavior of reinforced concrete beams at room and low temperature

    PubMed Central

    Mirzazadeh, M. Mehdi; Noël, Martin; Green, Mark F.

    2016-01-01

    This article provides data on the static behavior of reinforced concrete at room and low temperature including, strength, ductility, and crack widths of the reinforced concrete. The experimental data on the application of digital image correlation (DIC) or particle image velocimetry (PIV) in measuring crack widths and the accuracy and precision of DIC/PIV method with temperature variations when is used for measuring strains is provided as well. PMID:27158650

  8. Experimental data of the static behavior of reinforced concrete beams at room and low temperature.

    PubMed

    Mirzazadeh, M Mehdi; Noël, Martin; Green, Mark F

    2016-06-01

    This article provides data on the static behavior of reinforced concrete at room and low temperature including, strength, ductility, and crack widths of the reinforced concrete. The experimental data on the application of digital image correlation (DIC) or particle image velocimetry (PIV) in measuring crack widths and the accuracy and precision of DIC/PIV method with temperature variations when is used for measuring strains is provided as well. PMID:27158650

  9. Alternative consumable anodes for cathodic protection of reinforced concrete bridges

    SciTech Connect

    Bullard, Sophie J.; Covino, Bernard S., Jr.; Cramer, Stephen D.; Holcomb, Gordon R.; Russell, James H.; Cryer, C.B.; Laylor, H.M.

    1999-01-01

    Alternative consumable anodes were evaluated in the laboratory for use in cathodic protection systems for steel reinforced concrete bridges in coastal environments and in areas where deicing salts are employed. The anode materials included zinc hydrogel foil and thermal-sprayed Zn, Zn-15Al, and Al-12Zn-0.2In alloys. They were evaluated for service in both impressed current (ICCP) and galvanic (GCP) cathodic protection systems. ICCP anodes were electrochemically aged at current densities of five to fifteen times that used by the Oregon Department of Transportation (Oregon DOT) in typical coastal CP systems (2.2 mA/m2 based on anode area). GCP anodes were electrochemically aged at a rate defined by the steel-anode couple. Both types of anodes were exposed to 80°F, a relative humidity of 85 pct, and were periodically wetted with deionized water. The Zn anode gave the best performance in ICCP systems. The four anodes all produced sufficient current density suitable for use in GCP systems. The anodes materials, ranked in increasing order of GCP current output, were: thermal-sprayed Al-12Zn-0.2In, Zn hydrogel, thermal-sprayed Zn-15Al, and thermal-sprayed Zn.

  10. High-temperature testing of high performance fiber reinforced concrete

    NASA Astrophysics Data System (ADS)

    Fořt, Jan; Vejmelková, Eva; Pavlíková, Milena; Trník, Anton; Čítek, David; Kolísko, Jiří; Černý, Robert; Pavlík, Zbyšek

    2016-06-01

    The effect of high-temperature exposure on properties of High Performance Fiber Reinforced Concrete (HPFRC) is researched in the paper. At first, reference measurements are done on HPFRC samples without high-temperature loading. Then, the HPFRC samples are exposed to the temperatures of 200, 400, 600, 800, and 1000 °C. For the temperature loaded samples, measurement of residual mechanical and basic physical properties is done. Linear thermal expansion coefficient as function of temperature is accessed on the basis of measured thermal strain data. Additionally, simultaneous difference scanning calorimetry (DSC) and thermogravimetry (TG) analysis is performed in order to observe and explain material changes at elevated temperature. It is found that the applied high temperature loading significantly increases material porosity due to the physical, chemical and combined damage of material inner structure, and negatively affects also the mechanical strength. Linear thermal expansion coefficient exhibits significant dependence on temperature and changes of material structure. The obtained data will find use as input material parameters for modelling the damage of HPFRC structures exposed to the fire and high temperature action.

  11. Radiation exposure inside reinforced concrete buildings at Nagasaki

    SciTech Connect

    Rhoades, W.A.; Childs, R.L.; Ingersoll, D.T.

    1989-05-01

    The biological effects on the residents of Hiroshima and Nagasaki due to initial-irradiation exposure during the nuclear attacks of World War II was recognized immediately as an important source of information. After the war, an extensive effort gathered data concerning the locations of individuals at the time of the attack and their subsequent medical histories. The data from personnel located in reinforced concrete buildings are particularly significant, since large groups of occupants received radiation injury without complications due to blast and thermal effects. In order to correlate the radiation dose with physiological effects, the dose to each individual must be calculated. Enough information about the construction of the buildings was available after the war to allow a radiation transport model to be constructed, but the accurate calculation of penetration into such large, thick-walled three dimensional structures was beyond the scope of computing technology until recently. Now, the availability of Cray vector computers and the development of a specially-constructed discrete ordinates transport code, TORT, have combined to allow the successful completion of such a study. This document describes the radiation transport calculations and tabulates the resulting doses by source component and individual case location. An extensive uncertainty analysis is also included. These data are to be used in another study as input to a formal statistical analysis, resulting in a new value for the LD50 dose, i.e., the dose at which the mortality risk is 50%. 55 refs., 67 figs., 70 tabs.

  12. Peridynamic modeling of plain and reinforced concrete structures.

    SciTech Connect

    Silling, Stewart Andrew; Gerstle, Walter H.; Sau, Nicolas

    2005-08-01

    The peridynamic model was introduced by Silling in 1998. In this paper, we demonstrate the application of the quasistatic peridynamic model to two-dimensional, linear elastic, plane stress and plane strain problems, with special attention to the modeling of plain and reinforced concrete structures. We consider just one deviation from linearity--that which arises due to the irreversible sudden breaking of bonds between particles. The peridynamic model starts with the assumption that Newton's second law holds true on every infinitesimally small free body (or particle) within the domain of analysis. A specified force density function, called the pairwise force function, (with units of force per unit volume per unit volume) between each pair of infinitesimally small particles is postulated to act if the particles are closer together than some finite distance, called the material horizon. The pairwise force function may be assumed to be a function of the relative position and the relative displacement between the two particles. In this paper, we assume that for two particles closer together than the specified 'material horizon' the pairwise force function increases linearly with respect to the stretch, but at some specified stretch, the pairwise force function is irreversibly reduced to zero.

  13. Monitoring the Corrosion Process of Reinforced Concrete Using BOTDA and FBG Sensors

    PubMed Central

    Mao, Jianghong; Chen, Jiayun; Cui, Lei; Jin, Weiliang; Xu, Chen; He, Yong

    2015-01-01

    Expansion and cracking induced by the corrosion of reinforcement concrete is the major factor in the failure of concrete durability. Therefore, monitoring of concrete cracking is critical for evaluating the safety of concrete structures. In this paper, we introduce a novel monitoring method combining Brillouin optical time domain analysis (BOTDA) and fiber Bragg grating (FBG), based on mechanical principles of concrete expansion cracking. BOTDA monitors concrete expansion and crack width, while FBG identifies the time and position of cracking. A water-pressure loading simulation test was carried out to determine the relationship between fiber strain, concrete expansion and crack width. An electrical accelerated corrosion test was also conducted to evaluate the ability of this novel sensor to monitor concrete cracking under practical conditions. PMID:25884790

  14. Monitoring the corrosion process of reinforced concrete using BOTDA and FBG sensors.

    PubMed

    Mao, Jianghong; Chen, Jiayun; Cui, Lei; Jin, Weiliang; Xu, Chen; He, Yong

    2015-04-15

    Expansion and cracking induced by the corrosion of reinforcement concrete is the major factor in the failure of concrete durability. Therefore, monitoring of concrete cracking is critical for evaluating the safety of concrete structures. In this paper, we introduce a novel monitoring method combining Brillouin optical time domain analysis (BOTDA) and fiber Bragg grating (FBG), based on mechanical principles of concrete expansion cracking. BOTDA monitors concrete expansion and crack width, while FBG identifies the time and position of cracking. A water-pressure loading simulation test was carried out to determine the relationship between fiber strain, concrete expansion and crack width. An electrical accelerated corrosion test was also conducted to evaluate the ability of this novel sensor to monitor concrete cracking under practical conditions.

  15. Experimental investigation of bond in concrete members reinforced with shape memory alloy bars

    NASA Astrophysics Data System (ADS)

    Daghash, S. M.; Sherif, M. M.; Ozbulut, O. E.

    2015-04-01

    Conventional seismic design of reinforced concrete structures relies on yielding of steel reinforcement to dissipate energy while undergoing residual deformations. Therefore, reinforced concrete structures subjected to strong earthquakes experience large permanent displacements and are prone to severe damage or collapse. Shape memory alloys (SMAs) have gained increasing acceptance in recent years for use in structural engineering due to its attractive properties such as high corrosion resistance, excellent re-centering ability, good energy dissipation capacity, and durability. SMAs can undergo large deformations in the range of 6-8% strain and return their original undeformed position upon unloading. Due to their appealing characteristics, SMAs have been considered as an alternative to traditional steel reinforcement in concrete structures to control permanent deformations. However, the behavior of SMAs in combination with concrete has yet to be explored. In particular, the bond strength is important to ensure the composite action between concrete and SMA reinforcements. This study investigates the bond behavior between SMA bars and concrete through pull-out tests. To explore the size effect on bond strength, the tests are performed using various diameters of SMA bars. For the same diameter, the tests are also conducted with different embedment length to assess the effect of embedment length on bond properties of SMA bars. To monitor the slippage of the SMA reinforcement, an optical Digital Image Correlation method is used and the bond-slip curves are obtained.

  16. Bond characteristics of steel fiber and deformed reinforcing steel bar embedded in steel fiber reinforced self-compacting concrete (SFRSCC)

    NASA Astrophysics Data System (ADS)

    Aslani, Farhad; Nejadi, Shami

    2012-09-01

    Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of the self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, ductility, toughness, energy absorption capacity, fracture toughness and cracking. Although the available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates the bond characteristics between steel fiber and SCC firstly. Based on the available experimental results, the current analytical steel fiber pullout model (Dubey 1999) is modified by considering the different SCC properties and different fiber types (smooth, hooked) and inclination. In order to take into account the effect of fiber inclination in the pullout model, apparent shear strengths ( τ ( app)) and slip coefficient ( β) are incorporated to express the variation of pullout peak load and the augmentation of peak slip as the inclined angle increases. These variables are expressed as functions of the inclined angle ( ϕ). Furthurmore, steel-concrete composite floors, reinforced concrete floors supported by columns or walls and floors on an elastic foundations belong to the category of structural elements in which the conventional steel reinforcement can be partially replaced by the use of steel fibers. When discussing deformation capacity of structural elements or civil engineering structures manufactured using SFRSCC, one must be able to describe thoroughly both the behavior of the concrete matrix reinforced with steel fibers and the interaction between this composite matrix and discrete steel reinforcement of the conventional type. However, even though the knowledge on bond behavior is essential for evaluating the overall behavior of structural components containing reinforcement and steel fibers

  17. Bond characteristics of steel fiber and deformed reinforcing steel bar embedded in steel fiber reinforced self-compacting concrete (SFRSCC)

    NASA Astrophysics Data System (ADS)

    Aslani, Farhad; Nejadi, Shami

    2012-09-01

    Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of the self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, ductility, toughness, energy absorption capacity, fracture toughness and cracking. Although the available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates the bond characteristics between steel fiber and SCC firstly. Based on the available experimental results, the current analytical steel fiber pullout model (Dubey 1999) is modified by considering the different SCC properties and different fiber types (smooth, hooked) and inclination. In order to take into account the effect of fiber inclination in the pullout model, apparent shear strengths (τ (app)) and slip coefficient (β) are incorporated to express the variation of pullout peak load and the augmentation of peak slip as the inclined angle increases. These variables are expressed as functions of the inclined angle (ϕ). Furthurmore, steel-concrete composite floors, reinforced concrete floors supported by columns or walls and floors on an elastic foundations belong to the category of structural elements in which the conventional steel reinforcement can be partially replaced by the use of steel fibers. When discussing deformation capacity of structural elements or civil engineering structures manufactured using SFRSCC, one must be able to describe thoroughly both the behavior of the concrete matrix reinforced with steel fibers and the interaction between this composite matrix and discrete steel reinforcement of the conventional type. However, even though the knowledge on bond behavior is essential for evaluating the overall behavior of structural components containing reinforcement and steel fibers

  18. Analysis of concrete targets with different kinds of reinforcements subjected to blast loading

    NASA Astrophysics Data System (ADS)

    Oña, M.; Morales-Alonso, G.; Gálvez, F.; Sánchez-Gálvez, V.; Cendón, D.

    2016-05-01

    In this paper we describe an experimental campaign carried out to study and analyse the behaviour of concrete slabs when subjected to blast loading. Four different types of concrete have been tested: normal strength concrete with steel rebar, normal strength concrete with steel rebar retrofitted with Kevlar coating, steel fibre reinforced concrete (SFRC) and polypropylene fibre reinforced concrete (PFRC). The major asset of the experimental setup used is that it allows to subject up to four specimens to the same blast load what, besides being cost effective, makes possible to have a measure of the experimental scatter. The results of SFRC and PFRC concretes have been analysed by using a previously developed material model for the numerical simulation of concrete elements subjected to blast. The experimental campaign and preliminary results of this numerical analysis show how the high strain rates, in spite of improving the mechanical properties of these kinds of fibre reinforced concretes, lead to an embrittlement of the material, which may be dangerous from the point of view of the structural behaviour.

  19. Application of artificial neural networks to predict the deflections of reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Kaczmarek, Mateusz; Szymańska, Agnieszka

    2016-06-01

    Nonlinear structural mechanics should be taken into account in the practical design of reinforced concrete structures. Cracking is one of the major sources of nonlinearity. Description of deflection of reinforced concrete elements is a computational problem, mainly because of the difficulties in modelling the nonlinear stress-strain relationship of concrete and steel. In design practise, in accordance with technical rules (e.g., Eurocode 2), a simplified approach for reinforced concrete is used, but the results of simplified calculations differ from the results of experimental studies. Artificial neural network is a versatile modelling tool capable of making predictions of values that are difficult to obtain in numerical analysis. This paper describes the creation and operation of a neural network for making predictions of deflections of reinforced concrete beams at different load levels. In order to obtain a database of results, that is necessary for training and testing the neural network, a research on measurement of deflections in reinforced concrete beams was conducted by the authors in the Certified Research Laboratory of the Building Engineering Institute at Wrocław University of Science and Technology. The use of artificial neural networks is an innovation and an alternative to traditional methods of solving the problem of calculating the deflections of reinforced concrete elements. The results show the effectiveness of using artificial neural network for predicting the deflection of reinforced concrete beams, compared with the results of calculations conducted in accordance with Eurocode 2. The neural network model presented in this paper can acquire new data and be used for further analysis, with availability of more research results.

  20. Concrete mechanics. Part A: Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading

    NASA Astrophysics Data System (ADS)

    Walraven, J. C.; Reinhardt, H. W.

    The mechanism or transmission of forces across cracks whose faces are subjected to shear displacements are investigated. This mechanism is achieved by interaction of several components: axial and transverse stiffness (dowel action) of the reinforcement and direct transfer of force between the rough concrete crack faces, generally denoted by the term 'aggregate interlock'. Experimental research and the derivation of a theoretical model gave insight into the phenomenon. Tests were carried out on precracked shear specimens. Variables in the tests were the type of reinforcement (embedded reinforcing bars, external restraint bars), the concrete strength, the type of the concrete (sand gravel concrete, lightweight concrete), the grading of the concrete (continuous discontinuous), the scale of the concrete, and the initial crack width. Measurements were carried for determining the shear force, the crack displacements and, for the specimens with external reinforcement, the force in the restraining bars.

  1. Tensile properties of glass/natural jute fibre-reinforced polymer bars for concrete reinforcement

    NASA Astrophysics Data System (ADS)

    Han, J. W.; Lee, S. K.; Kim, K. W.; Park, C. G.

    2015-12-01

    The tensile performance of glass/natural jute fibre-reinforced polymer (FRP) bar, intended for concrete reinforcement was evaluated as a function of volume fraction of natural jute fibre. Natural jute fibre, mixed at a ratio of 7:3 with vinyl ester, was surface-treated with a silane coupling agent and used to replaced glass fibre in the composite in volume fractions of 0%, 30%, 50%, 70%, and 100%. The tensile load-displacement curve showed nearly linear elastic behaviour up to 50% natural jute fibre, but was partially nonlinear at a proportion of 70%. However, the glass/natural jute FRP bars prepared using 100% natural jute fibre showed linear elastic behaviour. Tensile strength decreased as the natural jute fibre volume fraction increased because the tensile strength of natural jute fibre is much lower than that of glass fibre (about 1:8.65). The degree of reduction was not proportional to the natural jute fibre volume fraction due to the low density of natural jute fibre (1/2 that of glass fibre). Thus, as the mix proportion of natural jute fibre increased, the amount (wt%) and number of fibres used also increased.

  2. Joint shear strength of FRP reinforced concrete beam-column joints

    NASA Astrophysics Data System (ADS)

    Saravanan, Jagadeesan; Kumaran, Ganapathy

    2011-03-01

    An assessment of the joint shear strength of exterior concrete beam-column joints reinforced internally with Glass Fibre Reinforced Polymer (GFRP) reinforcements under monotonically increasing load on beams keeping constant load on columns is carried out in this study. Totally eighteen numbers of specimens are cast and tested for different parametric conditions like beam longitudinal reinforcement ratio, concrete strength, column reinforcement ratio, joint aspect ratio and influence of the joint stirrups at the joint. Also finite element analysis is performed to simulate the behaviour of the beam-column joints under various parametric conditions. Based on this study, a modified design equation is proposed for assessing the joint shear strength of the GFRP reinforced beam-column specimens based on the experimental results and the review of the prevailing design equations.

  3. Effect of hot-dry environment on fiber-reinforced self-compacting concrete

    NASA Astrophysics Data System (ADS)

    Tioua, Tahar; Kriker, Abdelouahed; Salhi, Aimad; Barluenga, Gonzalo

    2016-07-01

    Drying shrinkage can be a major reason for the deterioration of concrete structures. Variation in ambient temperature and relative humidity cause changes in the properties of hardened concrete which can affect their mechanical and drying shrinkage characteristics. The present study investigated mechanical strength and particularly drying shrinkage properties of self-compacting concretes (SCC) reinforced with date palm fiber exposed to hot and dry environment. In this study a total of nine different fibers reinforced self compacting concrete (FRSCC) mixtures and one mixture without fiber were prepared. The volume fraction and the length of fibers reinforcement were 0.1-0.2-0.3% and 10-20-30 mm. It was observed that drying shrinkage lessened with adding low volumetric fraction and short length of fibers in curing condition (T = 20 °C and RH = 50 ± 5 %), but increased in hot and dry environment.

  4. Strain Sharing Assessment in Woven Fiber Reinforced Concrete Beams Using Fiber Bragg Grating Sensors.

    PubMed

    Montanini, Roberto; Recupero, Antonino; De Domenico, Fabrizio; Freni, Fabrizio

    2016-09-22

    Embedded fiber Bragg grating sensors have been extensively used worldwide for health monitoring of smart structures. In civil engineering, they provide a powerful method for monitoring the performance of composite reinforcements used for concrete structure rehabilitation and retrofitting. This paper discusses the problem of investigating the strain transfer mechanism in composite strengthened concrete beams subjected to three-point bending tests. Fiber Bragg grating sensors were embedded both in the concrete tensioned surface and in the woven fiber reinforcement. It has been shown that, if interface decoupling occurs, strain in the concrete can be up to 3.8 times higher than that developed in the reinforcement. A zero friction slipping model was developed which fitted very well the experimental data.

  5. Strain Sharing Assessment in Woven Fiber Reinforced Concrete Beams Using Fiber Bragg Grating Sensors.

    PubMed

    Montanini, Roberto; Recupero, Antonino; De Domenico, Fabrizio; Freni, Fabrizio

    2016-01-01

    Embedded fiber Bragg grating sensors have been extensively used worldwide for health monitoring of smart structures. In civil engineering, they provide a powerful method for monitoring the performance of composite reinforcements used for concrete structure rehabilitation and retrofitting. This paper discusses the problem of investigating the strain transfer mechanism in composite strengthened concrete beams subjected to three-point bending tests. Fiber Bragg grating sensors were embedded both in the concrete tensioned surface and in the woven fiber reinforcement. It has been shown that, if interface decoupling occurs, strain in the concrete can be up to 3.8 times higher than that developed in the reinforcement. A zero friction slipping model was developed which fitted very well the experimental data. PMID:27669251

  6. Numerical Investigations on a Blast Loaded Laced Reinforced Concrete Structure using an Equivalent Constitutive Property

    NASA Astrophysics Data System (ADS)

    Anandavalli, N.; Lakshmanan, N.; Prakash, Amar; Rajasankar, J.; Iyer, Nagesh R.

    2015-12-01

    A Laced Reinforced Concrete (LRC) structural element consists of continuously inclined shear reinforcement in the form of lacing that tie the longitudinal reinforcements on both faces of the structural element. LRC is used particularly in blast resistant construction. Conventional finite element modeling of reinforced concrete (RC) structures requires concrete and steel to be considered as separate entities and interaction between them to be defined through smeared, discrete or embedded approach. In this paper, a new approach for modeling RC structures is adopted to analyse a blast loaded LRC structure. Present approach considers RC/LRC as a homogenous material, whose constitutive property is derived based on the moment-curvature relationship of the structural component. An equivalent single-degree-of-freedom system obtained based on a proven technique is analysed to verify the results of the finite element analysis. Present approach significantly reduces the modeling effort and in turn, the computational demand for a given accuracy in the results.

  7. Modeling of concrete cracking due to corrosion process of reinforcement bars

    SciTech Connect

    Bossio, Antonio; Monetta, Tullio; Bellucci, Francesco; Lignola, Gian Piero; Prota, Andrea

    2015-05-15

    The reinforcement corrosion in Reinforced Concrete (RC) is a major reason of degradation for structures and infrastructures throughout the world leading to their premature deterioration before design life was attained. The effects of corrosion of reinforcement are: (i) the reduction of the cross section of the bars, and (ii) the development of corrosion products leading to the appearance of cracks in the concrete cover and subsequent cover spalling. Due to their intrinsic complex nature, these issues require an interdisciplinary approach involving both material science and structural design knowledge also in terms on International and National codes that implemented the concept of durability and service life of structures. In this paper preliminary FEM analyses were performed in order to simulate pitting corrosion or general corrosion aimed to demonstrate the possibility to extend the results obtained for a cylindrical specimen, reinforced by a single bar, to more complex RC members in terms of geometry and reinforcement. Furthermore, a mechanical analytical model to evaluate the stresses in the concrete surrounding the reinforcement bars is proposed. In addition, a sophisticated model is presented to evaluate the non-linear development of stresses inside concrete and crack propagation when reinforcement bars start to corrode. The relationships between the cracking development (mechanical) and the reduction of the steel section (electrochemical) are provided. Finally, numerical findings reported in this paper were compared to experimental results available in the literature and satisfactory agreement was found.

  8. Numerical analysis on seismic behavior of reinforced concrete beam to concrete filled steel tubular column connections with ring-beam

    NASA Astrophysics Data System (ADS)

    Zhao, Yi.; Xu, Li. Hua.

    2016-06-01

    This paper presents numerical study of the seismic behavior of reinforced concrete beam to concrete filled steel tube column connections with ring-beam. The material stress-strain relations, element type and boundary condition are selected, which are consistent with actual situation. Then the seismic behavior of this type of joint are researched by ABAQUS, and finite element analyses are conducted under cyclic loading. Its parameters are discussed including thickness of steel tubular column wall, sectional dimension of the ring-beam and strength of the core concrete. The results show that the ultimate capacity of the connections is improved with sectional dimension of the ring-beam increased. In the meanwhile, the influence on skeleton curve of the joints is slight of which included thickness of steel tubular column wall and strength of the core concrete.

  9. Nondestructive inspection of corrosion and delamination at the concrete-steel reinforcement interface

    NASA Astrophysics Data System (ADS)

    Miller, Tri Huu

    The proposed study explores the feasibility of detecting and quantifying corrosion and delamination (physical separation) at the interface between reinforcing steel bars and concrete using ultrasonic guided waves. The problem of corrosion of the reinforcing steel in structures has increased significantly in recent years. The emergence of this type of concrete deterioration, which was first observed in marine structures and chemical manufacturing plants, coincided with the increased applications of deicing salts (sodium and calcium chlorides) to roads and bridges during winter months in those states where ice and snow are of major concern. Concrete is strengthened by the inclusion of the reinforcement steel such as deformed or corrugated steel bars. Bonding between the two materials plays a vital role in maximizing performance capacity of the structural members. Durability of the structure is of concern when it is exposed to aggressive environments. Corrosion of reinforcing steel has led to premature deterioration of many concrete members before their design life is attained. It is therefore, important to be able to detect and measure the level of corrosion in reinforcing steel or delamination at the interface. The development and implementation of damage detection strategies, and the continuous health assessment of concrete structures then become a matter of utmost importance. The ultimate goal of this research is to develop a nondestructive testing technique to quantify the amount of corrosion in the reinforcing steel. The guided mechanical wave approach has been explored towards the development of such methodology. The use of an embedded ultrasonic network for monitoring corrosion in real structures is feasible due to its simplicity. The ultrasonic waves, specifically cylindrical guided waves can p ropagate a long distance along the reinforcing steel bars and are found to be sensitive to the interface conditions between steel bars and concrete. Ultrasonic

  10. Development of structural health monitoring and early warning system for reinforced concrete system

    SciTech Connect

    Iranata, Data E-mail: data@ce.its.ac.id; Wahyuni, Endah; Murtiadi, Suryawan; Widodo, Amien; Riksakomara, Edwin; Sani, Nisfu Asrul

    2015-04-24

    Many buildings have been damaged due to earthquakes that occurred recently in Indonesia. The main cause of the damage is the large deformation of the building structural component cannot accommodate properly. Therefore, it is necessary to develop the Structural Health Monitoring System (SHMS) to measure precisely the deformation of the building structural component in the real time conditions. This paper presents the development of SHMS for reinforced concrete structural system. This monitoring system is based on deformation component such as strain of reinforcement bar, concrete strain, and displacement of reinforced concrete component. Since the deformation component has exceeded the limit value, the warning message can be sent to the building occupies. This warning message has also can be performed as early warning system of the reinforced concrete structural system. The warning message can also be sent via Short Message Service (SMS) through the Global System for Mobile Communications (GSM) network. Hence, the SHMS should be integrated with internet modem to connect with GSM network. Additionally, the SHMS program is verified with experimental study of simply supported reinforced concrete beam. Verification results show that the SHMS has good agreement with experimental results.

  11. Incremental dynamic analysis of concrete moment resisting frames reinforced with shape memory composite bars

    NASA Astrophysics Data System (ADS)

    Zafar, Adeel; Andrawes, Bassem

    2012-02-01

    Fiber reinforced polymer (FRP) reinforcing bars have been used in concrete structures as an alternative to conventional steel reinforcement, in order to overcome corrosion problems. However, due to the linear behavior of the commonly used reinforcing fibers, they are not considered in structures which require ductility and damping characteristics. The use of superelastic shape memory alloy (SMA) fibers with their nonlinear elastic behavior as reinforcement in the composite could potentially provide a solution for this problem. Small diameter SMA wires are coupled with polymer matrix to produce SMA-FRP composite, which is sought in this research as reinforcing bars. SMA-FRP bars are sought in this study to enhance the seismic performance of reinforced concrete (RC) moment resisting frames (MRFs) in terms of reducing their residual inter-story drifts while still maintaining the elastic characteristics associated with conventional FRP. Three story one bay and six story two bay RC MRF prototype structures are designed with steel, SMA-FRP and glass-FRP reinforcement. The incremental dynamic analysis technique is used to investigate the behaviors of the two frames with the three different reinforcement types under a suite of ground motion records. It is found that the frames with SMA-FRP composite reinforcement exhibit higher performance levels including lower residual inter-story drifts, high energy dissipation and thus lower damage, which are important for structures in highly seismic zones.

  12. Interference Effects for a Group of Two Reinforced Concrete Chimneys

    NASA Astrophysics Data System (ADS)

    Niemann, H.-J.; Kasperski, M.

    1999-10-01

    Based on wind tunnel experiments in a simulated boundary layer flow, interference effects for a group of two 200 m high reinforced concrete chimneys are investigated, in particular the effect of the natural frequencies of the structure on the response. The wind induced forces are measured by a force balance which acts as a mechanical filter. This distortion has to be removed in the frequency domain. For translating the wind tunnel results to full-scale results, the measured signals have to be weighted additionally by the mechanical admittance of the real structure, taking into account the appropriate frequency scale. After correction and weighting in the frequency domain, the signals are re-transferred to the time domain to sample the extremes of the action effects, i.e., the responses, which now include the quasi-static and resonant contribution. To obtain a sufficiently high statistical stability, 60 independent runs are performed for each interference situation. The analysis of the extremes clearly shows that for interference situations the coefficient of variation of the extremes is high. Therefore, an appropriate fractile of the extremes should be used to define the design wind load. This fractile is obtained assuming a Gumbel distribution for the probability distribution of the extreme action effects. Additionally, an appropriate time scale has to be taken into account. The difference between the proposed fractile and the often applied mean value of the extremes is large, with differences up to 20%. Interference leads to a mixed excitation. Besides resonance due to the turbulence of the oncoming flow, considerable resonant excitation may occur due to wake buffeting. While in the first case a lower value of the natural frequency leads to larger action effects, resonance effects due to wake buffeting become worse for a higher value of the natural frequency. Since in the design calculations the natural frequency can be estimated only within a remaining

  13. Mitigation of chloride and sulfate based corrosion in reinforced concrete via electrokinetic nanoparticle treatment

    NASA Astrophysics Data System (ADS)

    Kupwade-Patil, Kunal

    Concrete is a porous material which is susceptible to the migration of highly deleterious species such as chlorides and sulfates. Various external sources, including sea salt spray, direct seawater wetting, deicing salts and chlorides can contaminate reinforced concrete. Chlorides diffuse into the capillary pores of concrete and come into contact with the reinforcement. When chloride concentration at the reinforcement exceeds a threshold level it breaks down the passive oxide layer, leading to chloride induced corrosion. The application of electrokinetics using positively charged nanoparticles for corrosion protection in reinforced concrete structures is an emerging technology. This technique involves the principle of electrophoretic migration of nanoparticles to hinder chloride diffusion in the concrete. The return of chlorides is inhibited by the electrodeposited assembly of the nanoparticles at the reinforcement interface. This work examined the nanoparticle treatment impact on chloride and sulfate induced corrosion in concrete. Electrokinetic Nanoparticle (EN) treatments were conducted on reinforced cylindrical concrete, rectangular ASTM G109 specimens that simulate a bridge deck and full scale beam specimens. EN treatment to mitigate external sulfate attack in concrete was performed on cylindrical concrete specimens. Corrosion results indicated lower corrosion potentials and rates as compared to the untreated specimens. Scanning electron microscopy (SEM) showed a dense microstructure within the EN treated specimens. Chemical analysis (Raman spectroscopy, X ray-diffraction, and Fourier transform infrared spectroscopy FTIR) showed the presence of strength enhancing phases such as calcium aluminate hydrate (C-A-H) and increased amounts of calcium silicate hydrate (C-S-H) within the EN treated specimens. Strength and porosity results showed an increase in strength and a reduction in porosity among the EN treated specimens. EN treatment acted as a protective

  14. Corrosion of Steels in Steel Reinforced Concrete in Cassava Juice

    NASA Astrophysics Data System (ADS)

    Oluwadare, G. O.; Agbaje, O.

    The corrosion of two types of construction steels, ST60Mn and RST37-2♦, in a low cyanide concentration environment (cassava juice) and embedded in concrete had been studied. The ST60 Mn was found to be more corrosion resistant in both ordinary water and the cassava juice environment. The cyanide in cassava juice does not attack the steel but it provides an environment of lower pH around the steel in the concrete which leads to breakdown of the passivating film provided by hydroxyl ions from cement. Other factors such as the curing time of the concrete also affect the corrosion rates of the steel in the concrete. The corrosion rate of the steel directly exposed to cassava juice i.e., steel not embedded in concrete is about twice that in concrete. Long exposure of concrete structure to cassava processing effluent might result in deterioration of such structures. Careful attention should therefore be paid to disposal of cassava processing effluents, especially in a country like Nigeria where such processing is now on the increase.

  15. Epoxy coating and other protective measures for reinforceing steel embedded in concrete subjected to a chloride laden environment

    NASA Astrophysics Data System (ADS)

    Kondratova, Irina

    1999-11-01

    Corrosion of steel reinforcement is the most significant factor in the deterioration of reinforced concrete structures. Corrosion of reinforcing steel in marine structures and bridges is initiated mainly by chloride contamination. When steel starts to corrode, the cross section of the reinforcing bar becomes smaller, also the volume of corrosion products exerts a pressure on the concrete resulting in spalling of the concrete cover and directly exposing the steel to the corrosive agents, thus accelerating the corrosion process and further reducing the load carrying capacity of the concrete member. Although there are corrosion protective measures available to the concrete producer such as use of protective coatings on steel surface and use of corrosion inhibitors, a very limited amount of information exists on the comparative behavior of these common corrosion protection strategies in cracked concrete, especially in cracked high performance concrete (HPC). The relative effectiveness of different protection methods for steel reinforcement such as the use of new types of epoxy-coated reinforcement, galvanized reinforcement, and corrosion inhibitors was investigated in concrete with water-to-cement ratios of 0.60 and 0.40 and 0.25. Concrete slabs were uncracked and had preformed transverse cracks. The effect of water-to-cement ratio and crack widths on the rate of corrosion in precracked reinforced concrete slabs also was investigated. Testing was performed in the laboratory and in the field. It was found that cracked HPC concrete alone or with addition of corrosion inhibitors cannot provide sufficient corrosion protection for uncoated steel reinforcement in a chloride-laden environment and that additional protection to the reinforcing steel in the form of epoxy coating is necessary to provide long-term service life of the concrete structure.

  16. Reinforcement of asphalt concrete pavement by segments of exhausted fiber used for sorption of oil spill

    NASA Astrophysics Data System (ADS)

    Lukashevich, V. N.; Efanov, I. N.

    2015-01-01

    The paper is aimed at construction of the experimental road pavement made of dispersed reinforced asphalt concrete. Electronic paramagnetic resonance, infrared spectroscopy and fluorescent bitumen studies were used to prove that disperse reinforcement of asphalt concrete mixtures with fibers of exhausted sorbents reduce the selective filtration of low polymeric fractions of petroleum bitumen and improve its properties in the adsorption layer. Sesquioxides are neutralized as catalysts aging asphalt binder. This leads to improvement in the elasticity of bitumen films at low temperatures and provide better crack resistance of coatings to reduce the intensity of the aging of asphalt binder, and, therefore, to increase the durability of road pavements. The experimental road pavement made of dispersed reinforced asphalt concrete operated during 4 years and demonstrated better transport- performance properties in comparison with the analogue pavements.

  17. A state of the art review on reinforced concrete beams with openings retrofitted with FRP

    NASA Astrophysics Data System (ADS)

    Osman, Bashir H.; Wu, Erjun; Ji, Bohai; S Abdelgader, Abdeldime M.

    2016-09-01

    The use of externally bonded fiber reinforced polymer (FRP) sheets, strips or steel plates is a modern and convenient way for strengthening of reinforced concrete (RC) beams. Several researches have been carried out on reinforced concrete beams with web openings that strengthened using fiber reinforced polymer composite. Majority of researches focused on shear strengthening compared with flexural strengthening, while others studied the effect of openings on shear and flexural separately with various loading. This paper investigates the impact of more than sixty articles on opening reinforced concrete beams with and without strengthening by fiber reinforcement polymers FRP. Moreover, important practical issues, which are contributed in shear strengthening of beams with different strengthening techniques, such as steel plate and FRP laminate, and detailed with various design approaches are discussed. Furthermore, a simple technique of applying fiber reinforced polymer contributed with steel plate for strengthening the RC beams with openings under different load application is concluded. Directions for future research based on the existing gaps of the present works are presented.

  18. Axisymmetric analysis of a 1:6-scale reinforced concrete containment building using a distributed cracking model for the concrete

    SciTech Connect

    Weatherby, J.R.

    1987-09-01

    Results of axisymmetric structural analyses of a 1:6 scale model of a reinforced concrete nuclear containment building are presented. Both a finite element shell analysis and a simplified membrane analysis were made to predict the structural response and ultimate pressure capacity of the model. Analytical results indicate that the model will fail at an internal pressure of 187 psig when the stress level in the hoop reinforcement at the midsection of the cylinder exceeds the ultimate strength of the bar splices. 5 refs., 34 figs., 6 tabs.

  19. Evaluation of Sustainability of Multistory Reinforced Concrete Structure

    NASA Astrophysics Data System (ADS)

    Al-Tamimi, A. K.; Ibrahim, A.; Al-Sughaiyer, N.

    Three different types of concrete mixes of design strengths 100 MPa, 50 MPa, and 50 MPa lightweight were designed, produced, and analyzed in the effort to quantify their effects on sustainability and economics. An overall comparison taking into consideration the structural, environmental, and economical effectiveness was conducted to find the most beneficial and reliable material to be used in sustainable structures. Different concrete types were used in the design of typical multi story buildings of the same loadings and dimensions. The only input variables in this research are the different mixes of concrete. By fixing the applied loadings and the buildings' dimensions, the three different materials were studied in terms of their effects on the structural design of members, carbon footprint and sustainability, and economics. High strength concrete using microsilica was concluded to be the most effective material to be used in construction with the best effects on sustainability and economics.

  20. Crack identification for reinforced concrete using PZT based smart rebar active sensing diagnostic network

    NASA Astrophysics Data System (ADS)

    Song, N. N.; Wu, F.

    2016-04-01

    An active sensing diagnostic system using PZT based smart rebar for SHM of RC structure has been currently under investigation. Previous test results showed that the system could detect the de-bond of concrete from reinforcement, and the diagnostic signals were increased exponentially with the de-bonding size. Previous study also showed that the smart rebar could function well like regular reinforcement to undertake tension stresses. In this study, a smart rebar network has been used to detect the crack damage of concrete based on guided waves. Experimental test has been carried out for the study. In the test, concrete beams with 2 reinforcements have been built. 8 sets of PZT elements were mounted onto the reinforcement bars in an optimized way to form an active sensing diagnostic system. A 90 kHz 5-cycle Hanning-windowed tone burst was used as input. Multiple cracks have been generated on the concrete structures. Through the guided bulk waves propagating in the structures from actuators and sensors mounted from different bars, crack damage could be detected clearly. Cases for both single and multiple cracks were tested. Different crack depths from the surface and different crack numbers have been studied. Test result shows that the amplitude of sensor output signals is deceased linearly with a propagating crack, and is decreased exponentially with increased crack numbers. From the study, the active sensing diagnostic system using PZT based smart rebar network shows a promising way to provide concrete crack damage information through the "talk" among sensors.

  1. Damage Source Identification of Reinforced Concrete Structure Using Acoustic Emission Technique

    PubMed Central

    Panjsetooni, Alireza; Bunnori, Norazura Muhamad; Vakili, Amir Hossein

    2013-01-01

    Acoustic emission (AE) technique is one of the nondestructive evaluation (NDE) techniques that have been considered as the prime candidate for structural health and damage monitoring in loaded structures. This technique was employed for investigation process of damage in reinforced concrete (RC) frame specimens. A number of reinforced concrete RC frames were tested under loading cycle and were simultaneously monitored using AE. The AE test data were analyzed using the AE source location analysis method. The results showed that AE technique is suitable to identify the sources location of damage in RC structures. PMID:23997681

  2. 75 FR 7562 - Certain Steel Concrete Reinforcing Bars From Turkey: Notice of Court Decision Not in Harmony With...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-22

    ..., Rescission of Antidumping Duty Administrative Review in Part, and Determination To Revoke in Part, 70 FR... International Trade Administration Certain Steel Concrete Reinforcing Bars From Turkey: Notice of Court Decision... certain steel concrete reinforcing bars (rebar) from Turkey covering the period of review (POR) of April...

  3. Active tendon control of reinforced concrete frame structures subjected to near-fault effects

    NASA Astrophysics Data System (ADS)

    Nigdeli, Sinan Melih; Boduroǧlu, M. Hasan

    2013-10-01

    A reinforced concrete (RC) frame structure was controlled with active tendons under the excitation of near-fault ground motions. Proportional Integral Derivative (PID) type controllers were used and the controller was tuned by using a numerical algorithm. In order to prevent brittle fracture of the structure, the aim of the control is to reduce maximum base shear force. The RC structure was investigated for different characteristic strengths of concrete and the approach is applicable for the structure with 14 MPa concrete strength or higher.

  4. Flexural Behaviour Of Reinforced Concrete Beams Containing Expanded Glass As Lightweight Aggregates

    NASA Astrophysics Data System (ADS)

    Khatib, Jamal; Jefimiuk, Adrian; Khatib, Sammy

    2015-12-01

    The flexural properties of reinforced concrete beams containing expanded glass as a partial fine aggregate (sand) replacement are investigated. Four concrete mixes were employed to conduct this study. The fine aggregate was replaced with 0%, 25%, 50% and 100% (by volume) expanded glass. The results suggest that the incorporation of 50% expanded glass increased the workability of the concrete. The compressive strength was decreasing linearly with the increasing amount of expanded glass. The ductility of the concrete beam significantly improved with the incorporation of the expanded glass. However, the load-carrying capacity of the beam and load at which the first crack occurs was reduced. It was concluded that the inclusion of expanded glass in structural concrete applications is feasible.

  5. Damage evaluation of reinforced concrete frame based on a combined fiber beam model

    NASA Astrophysics Data System (ADS)

    Shang, Bing; Liu, ZhanLi; Zhuang, Zhuo

    2014-04-01

    In order to analyze and simulate the impact collapse or seismic response of the reinforced concrete (RC) structures, a combined fiber beam model is proposed by dividing the cross section of RC beam into concrete fiber and steel fiber. The stress-strain relationship of concrete fiber is based on a model proposed by concrete codes for concrete structures. The stress-strain behavior of steel fiber is based on a model suggested by others. These constitutive models are implemented into a general finite element program ABAQUS through the user defined subroutines to provide effective computational tools for the inelastic analysis of RC frame structures. The fiber model proposed in this paper is validated by comparing with experiment data of the RC column under cyclical lateral loading. The damage evolution of a three-dimension frame subjected to impact loading is also investigated.

  6. Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts

    SciTech Connect

    C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

    2012-03-01

    The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

  7. Ultrasonic assessment of service life of concrete structures subject to reinforcing steel corrosion

    NASA Astrophysics Data System (ADS)

    Udegbunam, Ogechukwu Christian

    Over half of the bridges in the United States were built before 1970. Such bridges and the network of roads that they carry include the Inter State system, which was built as part of the great public works program, following the end of the Second World War. During that era, the emphasis was on strength design and economical construction of new structures, and not much premium was placed on durability and maintainability concerns. Since the end of this construction boom in the early 1970s, the concern for the durability of transportation infrastructure has steadily gained prominence among those agencies that must secure, program and administer funds for maintaining highway networks. The objective of this research was to develop a nondestructive method of assessing the durability of concrete bridge decks susceptible to damage from corrosion of embedded reinforcing steel. This was accomplished by formulating a holistic approach that accounts for the major factors that influence corrosion based deterioration of reinforced concrete. In this approach, the assessment of the durability of concrete bridge decks is based on a model that estimates the time it takes for the cover concrete to fail a result of stresses caused by expansion of reinforcing steel bars, due to corrosion activities. This time to failure is comprised of two distinct periods that must be evaluated before the problem can be solved. The research consisted of an experimental program and an analytical study. In the experimental program concrete specimens were cast and tested to determine their diffusivity and mechanical properties. The diffusivity was used to evaluate the period it takes for corrosion of the reinforcing bars to commence. In the analytical study, the resistance of the concrete structure against the internal forces caused by corrosion was evaluated with the finite element techniques. This resistance was used to evaluate the period defining the failure of the cover concrete. These two periods

  8. 77 FR 71631 - Steel Concrete Reinforcing Bar From Belarus, China, Indonesia, Latvia, Moldova, Poland, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... electronic filing have been amended. The amendments took effect on November 7, 2011. See 76 FR 61937 (Oct. 6... Ukraine; Scheduling of Full Five-Year Reviews Concerning the Antidumping Duty Orders on Steel Concrete Reinforcing Bar From Belarus, China, Indonesia, Latvia, Moldova, Poland, and Ukraine AGENCY: United...

  9. 77 FR 39254 - Steel Concrete Reinforcing Bar From Belarus, China, Indonesia, Latvia, Moldova, Poland, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... concrete reinforcing bar from Belarus, China, Indonesia, Latvia, Moldova, Poland, and Ukraine (66 FR 46777..., Indonesia, Latvia, Moldova, Poland, and Ukraine (72 FR 44830). The Commission is now conducting second... part 207), as most recently amended at 74 FR 2847 (January 16, 2009). \\1\\ No response to this...

  10. RETENTION BASIN, ASSOCIATED WITH PUMP HOUSE, TRA636. TWO REINFORCED CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    RETENTION BASIN, ASSOCIATED WITH PUMP HOUSE, TRA-636. TWO REINFORCED CONCRETE BASINS ARE ADJACENT TO ONE ANOTHER. CAMERA FACING SOUTH. INL NEGATIVE NO. 2397A. Unknown Photographer, 5/13/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  11. 78 FR 68090 - Steel Concrete Reinforcing Bar from Mexico and Turkey

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-13

    ..., Washington, DC, and by publishing the notice in the Federal Register of September 11, 2013 (78 FR 55755). The... authority of Title VII of the Tariff Act of 1930 have been tolled by 16 days. 78 FR 64011, October 25, 2013... COMMISSION Steel Concrete Reinforcing Bar from Mexico and Turkey Determinations On the basis of the record...

  12. Degradation and mechanism of the mechanics and durability of reinforced concrete slab in a marine environment

    NASA Astrophysics Data System (ADS)

    Wu, Sheng-xing; Liu, Guan-guo; Bian, Han-bing; Lv, Wei-bo; Jiang, Jian-hua

    2016-04-01

    An experimental research was conducted to determine the corrosion and bearing capacity of a reinforced concrete (RC) slab at different ages in a marine environment. Results show that the development of corrosion-induced cracks on a slab in a marine environment can be divided into three stages according to crack morphology at the bottom of the slab. In the first stage, cracks appear. In the second stage, cracks develop from the edges to the middle of the slab. In the third stage, longitudinal and transverse corrosion-induced cracks coexist. The corrosion ratio of reinforcements nonlinearly increases with the age, and the relationship between the corrosion ratio of the reinforcements and the corrosion-induced crack width of the concrete is established. The flexural capacity of the corroded RC slab nonlinearly decreases with the age, and the model for the bearing capacity factor of the corroded RC slab is established. The mid-span deflection of the corroded RC slab that corresponds to the yield of the reinforcements linearly increases with the increase in corrosion ratio. Finally, the mechanisms of corrosion morphology and the degradation of the mechanical properties of an RC slab in a marine environment are discussed on the basis of the basic theories of steel corrosion in concrete and concrete structure design.

  13. 76 FR 48802 - Certain Steel Concrete Reinforcing Bars From Turkey; Notice of Amended Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-09

    ... Determination To Revoke in Part, 73 FR 66218 (Nov. 7, 2008). The period of review (POR) is April 1, 2006... Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). This clarification... International Trade Administration Certain Steel Concrete Reinforcing Bars From Turkey; Notice of Amended...

  14. 78 FR 73838 - Steel Concrete Reinforcing Bar From Turkey: Postponement of Preliminary Determination in the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... Investigations, 78 FR 60831 (October 2, 2013) (Initiation Notice). \\2\\ See Memorandum for the Record from Paul... International Trade Administration Steel Concrete Reinforcing Bar From Turkey: Postponement of Preliminary... Department of Commerce (the Department) initiated a countervailing duty investigation on steel...

  15. Driving Energy of Reinforcing Steel Bar for Discriminating Background Medium of Concrete

    NASA Astrophysics Data System (ADS)

    Toh, Ryo; Motooka, Seiichi

    2008-05-01

    A method for discriminating the background media of concrete using the quality factor of elastic waves multireflected in the concrete was proposed. A reinforcing steel bar buried inside the concrete is employed as a sound source driven by the induction of impact electromagnetic field radiated from a spiral coil placed on the surface of the concrete. In this paper, the appropriate energy for driving the reinforcing steel bar, to obtain stable quality factors with clear differences between different background media, is studied experimentally. With various driving energies, multireflected elastic waves corresponding to three types of background medium, air, sand, and water, are measured. The quality factors are calculated by the linear predictive coefficient analysis method. The results show that the quality factors tend to increase when the driving energy is at its lower region, and they remain comparatively stable when the driving energy is higher than a certain value. For reinforcing steel bars with different diameters, the curves of quality factors versus driving energies agree well by introducing a newly defined volume-normalized driving energy. For the reinforcing steel bar of 13 mm diameter, the appropriate driving energy for background media discrimination is approximately 0.5 J.

  16. Detection of active corrosion in reinforced and prestressed concrete: overview of NIST TIP project

    NASA Astrophysics Data System (ADS)

    Gonzalez-Nunez, M. A.; Nanni, A.; Matta, F.; Ziehl, P.

    2011-04-01

    The US transportation infrastructure has been receiving intensive public and private attention in recent years. The Federal Highway Administration estimates that 42 percent of the nearly 600,000 bridges in the Unites States are in need of structural or functional rehabilitation1. Corrosion of reinforcement steel is the main durability issue for reinforced and prestressed concrete structures, especially in coastal areas and in regions where de-icing salts are regularly used. Acoustic Emission (AE) has proved to be a promising method for detecting corrosion in steel reinforced and prestressed concrete members. This type of non-destructive test method primarily measures the magnitude of energy released within a material when physically strained. The expansive ferrous byproducts resulting from corrosion induce pressure at the steel-concrete interface, producing longitudinal and radial microcracks that can be detected by AE sensors. In the experimental study presented herein, concrete block specimens with embedded steel reinforcing bars and strands were tested under accelerated corrosion to relate the AE activity with the onset and propagation stages of corrosion. AE data along with half cell potential measurements and galvanic current were recorded to examine the deterioration process. Finally, the steel strands and bars were removed from the specimens, cleaned and weighed. The results were compared vis-à-vis Faraday's law to correlate AE measurements with degree of corrosion in each block.

  17. A New Evaluation Method of Stored Heat Effect of Reinforced Concrete Wall of Cold Storage

    NASA Astrophysics Data System (ADS)

    Nomura, Tomohiro; Murakami, Yuji; Uchikawa, Motoyuki

    Today it has become imperative to save energy by operating a refrigerator in a cold storage executed by external insulate reinforced concrete wall intermittently. The theme of the paper is to get the evaluation method to be capable of calculating, numerically, interval time for stopping the refrigerator, in applying reinforced concrete wall as source of stored heat. The experiments with the concrete models were performed in order to examine the time variation of internal temperature after refrigerator stopped. In addition, the simulation method with three dimensional unsteady FEM for personal-computer type was introduced for easily analyzing the internal temperature variation. Using this method, it is possible to obtain the time variation of internal temperature and to calculate the interval time for stopping the refrigerator.

  18. Structural and seismic analyses of waste facility reinforced concrete storage vaults

    SciTech Connect

    Wang, C.Y.

    1995-07-01

    Facility 317 of Argonne National Laboratory consists of several reinforced concrete waste storage vaults designed and constructed in the late 1940`s through the early 1960`s. In this paper, structural analyses of these concrete vaults subjected to various natural hazards are described, emphasizing the northwest shallow vault. The natural phenomenon hazards considered include both earthquakes and tornados. Because these vaults are deeply embedded in the soil, the SASSI (System Analysis of Soil-Structure Interaction) code was utilized for the seismic calculations. The ultimate strength method was used to analyze the reinforced concrete structures. In all studies, moment and shear strengths at critical locations of the storage vaults were evaluated. Results of the structural analyses show that almost all the waste storage vaults meet the code requirements according to ACI 349--85. These vaults also satisfy the performance goal such that confinement of hazardous materials is maintained and functioning of the facility is not interrupted.

  19. Cyclic behavior, development, and characteristics of a ductile hybrid fiber-reinforced polymer (DHFRP) for reinforced concrete members

    NASA Astrophysics Data System (ADS)

    Hampton, Francis Patrick

    Reinforced concrete (R/C) structures especially pavements and bridge decks that constitute vital elements of the infrastructure of all industrialized societies are deteriorating prematurely. Structural repair and upgrading of these structural elements have become a more economical option for constructed facilities especially in the United States and Canada. One method of retrofitting concrete structures is the use of advanced materials. Fiber reinforced polymer (FRP) composite materials typically are in the form of fabric sheets or reinforcing bars. While the strength and stiffness of the FRP is high, composites are inherently brittle, with limited or no ductility. Conventional FRP systems cannot currently meet ductility demand, and therefore, may fail in a catastrophic failure mode. The primary goal of this research was to develop an optimized prototype 10-mm diameter DHFRP bar. The behavior of the bar under full load reversals to failure was investigated. However, this bar first needed to be designed and manufactured in the Fibrous Materials Research at Drexel University. Material properties were determined through testing to categorize the strength properties of the DHFRP. Similitude was used to demonstrate the scaling of properties from the original model bars. The four most important properties of the DHFRP bars are sufficient strength and stiffness, significant ductility for plasticity to develop in the R/C section, and sufficient bond strength for the R/C section to develop its full strength. Once these properties were determined the behavior of reinforced concrete members was investigated. This included the testing of prototype-size beams under monotonic loading and model and prototype beam-columns under reverse cyclic loading. These tests confirmed the large ductility exhibited by the DHFRP. Also the energy absorption capacity of the bar was demonstrated by the hysteretic behavior of the beam-columns. Displacement ductility factors in the range of 3

  20. Primer on Durability of Nuclear Power Plant Reinforced Concrete Structures - A Review of Pertinent Factors

    SciTech Connect

    Naus, Dan J

    2007-02-01

    The objective of this study was to provide a primer on the environmental effects that can affect the durability of nuclear power plant concrete structures. As concrete ages, changes in its properties will occur as a result of continuing microstructural changes (i.e., slow hydration, crystallization of amorphous constituents, and reactions between cement paste and aggregates), as well as environmental influences. These changes do not have to be detrimental to the point that concrete will not be able to meet its performance requirements. Concrete, however, can suffer undesirable changes with time because of improper specifications, a violation of specifications, or adverse performance of its cement paste matrix or aggregate constituents under either physical or chemical attack. Contained in this report is a discussion on concrete durability and the relationship between durability and performance, a review of the historical perspective related to concrete and longevity, a description of the basic materials that comprise reinforced concrete, and information on the environmental factors that can affect the performance of nuclear power plant concrete structures. Commentary is provided on the importance of an aging management program.

  1. Concrete material characterization reinforced concrete tank structure Multi-Function Waste Tank Facility

    NASA Astrophysics Data System (ADS)

    Winkel, B. V.

    1995-03-01

    The purpose of this report is to document the Multi-Function Waste Tank Facility (MWTF) Project position on the concrete mechanical properties needed to perform design/analysis calculations for the MWTF secondary concrete structure. This report provides a position on MWTF concrete properties for the Title 1 and Title 2 calculations. The scope of the report is limited to mechanical properties and does not include the thermophysical properties of concrete needed to perform heat transfer calculations. In the 1970's, a comprehensive series of tests were performed at Construction Technology Laboratories (CTL) on two different Hanford concrete mix designs. Statistical correlations of the CTL data were later generated by Pacific Northwest Laboratories (PNL). These test results and property correlations have been utilized in various design/analysis efforts of Hanford waste tanks. However, due to changes in the concrete design mix and the lower range of MWTF operating temperatures, plus uncertainties in the CTL data and PNL correlations, it was prudent to evaluate the CTL data base and PNL correlations, relative to the MWTF application, and develop a defendable position. The CTL test program for Hanford concrete involved two different mix designs: a 3 kip/sq in mix and a 4.5 kip/sq in mix. The proposed 28-day design strength for the MWTF tanks is 5 kip/sq in. In addition to this design strength difference, there are also differences between the CTL and MWTF mix design details. Also of interest, are the appropriate application of the MWTF concrete properties in performing calculations demonstrating ACI Code compliance. Mix design details and ACI Code issues are addressed in Sections 3.0 and 5.0, respectively. The CTL test program and PNL data correlations focused on a temperature range of 250 to 450 F. The temperature range of interest for the MWTF tank concrete application is 70 to 200 F.

  2. Concrete material characterization reinforced concrete tank structure Multi-Function Waste Tank Facility

    SciTech Connect

    Winkel, B.V.

    1995-03-03

    The purpose of this report is to document the Multi-Function Waste Tank Facility (MWTF) Project position on the concrete mechanical properties needed to perform design/analysis calculations for the MWTF secondary concrete structure. This report provides a position on MWTF concrete properties for the Title 1 and Title 2 calculations. The scope of the report is limited to mechanical properties and does not include the thermophysical properties of concrete needed to perform heat transfer calculations. In the 1970`s, a comprehensive series of tests were performed at Construction Technology Laboratories (CTL) on two different Hanford concrete mix designs. Statistical correlations of the CTL data were later generated by Pacific Northwest Laboratories (PNL). These test results and property correlations have been utilized in various design/analysis efforts of Hanford waste tanks. However, due to changes in the concrete design mix and the lower range of MWTF operating temperatures, plus uncertainties in the CTL data and PNL correlations, it was prudent to evaluate the CTL data base and PNL correlations, relative to the MWTF application, and develop a defendable position. The CTL test program for Hanford concrete involved two different mix designs: a 3 kip/in{sup 2} mix and a 4.5 kip/in{sup 2} mix. The proposed 28-day design strength for the MWTF tanks is 5 kip/in{sup 2}. In addition to this design strength difference, there are also differences between the CTL and MWTF mix design details. Also of interest, are the appropriate application of the MWTF concrete properties in performing calculations demonstrating ACI Code compliance. Mix design details and ACI Code issues are addressed in Sections 3.0 and 5.0, respectively. The CTL test program and PNL data correlations focused on a temperature range of 250 to 450 F. The temperature range of interest for the MWTF tank concrete application is 70 to 200 F.

  3. Corrosion monitoring of reinforcing steel in concrete by electrochemical sensors

    NASA Astrophysics Data System (ADS)

    Qiao, Guofu; Hong, Yi; Ou, Jinping

    2010-04-01

    Health degradation by corrosion of steel in civil engineering, especially in rough environment, is a persistent problem. Structural health monitoring (SHM) techniques can lead to improved estimates of structural safety and serviceability. A novel all solid state-current confined corrosion sensor has been developed to provide the platform for corrosion monitoring of the steel bar in concrete beam by electrochemical method. Finite element method has been used to certify the current confined effect of the sensor. The sensors have been used in concrete beams to monitor the corrosion of the steel bar. Also, half-cell potential of the beam has obtained. The results shows that the corrosion sensor can effectively confine the current in the fixed area which is 45mm×π×Dsteel bar and the monitoring results of the corrosion sensor are accurate.

  4. Parametric Study of Shear Strength of Concrete Beams Reinforced with FRP Bars

    NASA Astrophysics Data System (ADS)

    Thomas, Job; Ramadass, S.

    2016-06-01

    Fibre Reinforced Polymer (FRP) bars are being widely used as internal reinforcement in structural elements in the last decade. The corrosion resistance of FRP bars qualifies its use in severe and marine exposure conditions in structures. A total of eight concrete beams longitudinally reinforced with FRP bars were cast and tested over shear span to depth ratio of 0.5 and 1.75. The shear strength test data of 188 beams published in various literatures were also used. The model originally proposed by Indian Standard Code of practice for the prediction of shear strength of concrete beams reinforced with steel bars IS:456 (Plain and reinforced concrete, code of practice, fourth revision. Bureau of Indian Standards, New Delhi, 2000) is considered and a modification to account for the influence of the FRP bars is proposed based on regression analysis. Out of the 196 test data, 110 test data is used for the regression analysis and 86 test data is used for the validation of the model. In addition, the shear strength of 86 test data accounted for the validation is assessed using eleven models proposed by various researchers. The proposed model accounts for compressive strength of concrete (f ck ), modulus of elasticity of FRP rebar (E f ), longitudinal reinforcement ratio (ρ f ), shear span to depth ratio (a/d) and size effect of beams. The predicted shear strength of beams using the proposed model and 11 models proposed by other researchers is compared with the corresponding experimental results. The mean of predicted shear strength to the experimental shear strength for the 86 beams accounted for the validation of the proposed model is found to be 0.93. The result of the statistical analysis indicates that the prediction based on the proposed model corroborates with the corresponding experimental data.

  5. Parametric Study of Shear Strength of Concrete Beams Reinforced with FRP Bars

    NASA Astrophysics Data System (ADS)

    Thomas, Job; Ramadass, S.

    2016-09-01

    Fibre Reinforced Polymer (FRP) bars are being widely used as internal reinforcement in structural elements in the last decade. The corrosion resistance of FRP bars qualifies its use in severe and marine exposure conditions in structures. A total of eight concrete beams longitudinally reinforced with FRP bars were cast and tested over shear span to depth ratio of 0.5 and 1.75. The shear strength test data of 188 beams published in various literatures were also used. The model originally proposed by Indian Standard Code of practice for the prediction of shear strength of concrete beams reinforced with steel bars IS:456 (Plain and reinforced concrete, code of practice, fourth revision. Bureau of Indian Standards, New Delhi, 2000) is considered and a modification to account for the influence of the FRP bars is proposed based on regression analysis. Out of the 196 test data, 110 test data is used for the regression analysis and 86 test data is used for the validation of the model. In addition, the shear strength of 86 test data accounted for the validation is assessed using eleven models proposed by various researchers. The proposed model accounts for compressive strength of concrete ( f ck ), modulus of elasticity of FRP rebar ( E f ), longitudinal reinforcement ratio ( ρ f ), shear span to depth ratio ( a/ d) and size effect of beams. The predicted shear strength of beams using the proposed model and 11 models proposed by other researchers is compared with the corresponding experimental results. The mean of predicted shear strength to the experimental shear strength for the 86 beams accounted for the validation of the proposed model is found to be 0.93. The result of the statistical analysis indicates that the prediction based on the proposed model corroborates with the corresponding experimental data.

  6. Response Simulation of a Micro Reinforced Concrete Target Under Ballistic Impact

    NASA Astrophysics Data System (ADS)

    Mohan, V.; Rajasankar, J.; Iyer, N. R.

    2014-05-01

    The response of concrete structures subjected to impact loading has received extensive attention in both civil and military applications. Research on improving the shock resistance of concrete has led to the development of cementitious composites. Micro Reinforced Concrete (MRC), a type of cementitious composite, is a concrete matrix embedded with multilayered steel wire meshes. This paper presents 3D hydrocode simulations of MRC panels subjected to impact under a ballistic range. A finite element model based on Lagrange formulation is used to represent both a 300 mm × 300 mm × 100 mm target with 30 layers of wire mesh and a 5.56 × 45 mm projectile in simulations. Penetration depth and damage patterns of the MRC mesh cement composite panel are numerically compared with those of the field experiment. The results show a relatively good agreement.

  7. Resistance of plain and steel fiber-reinforced concrete slabs against short ogival projectiles impact

    NASA Astrophysics Data System (ADS)

    Mu, ZhongCheng; Zhang, Wei; Pang, PaoJun; Yang, ZhenQi

    2010-03-01

    Due to the enhanced energy absorption characteristics, the steel fiber-reinforced concrete (SFPC) structures gains more and more attention in the civilian and military ballistic protection structures when comparing with the plain concrete (PC) ones. By comparison on the penetration depth, the crater volume on impact face of the target and the debris cloud topography, the resistance of PC and SFPC slabs against projectiles impacting was investigated experimentally in a two-stage light-gas gun. In order to more widespread understand the effect of steel fibers against projectiles impacting, five different types of concrete slabs were done in the range of unconfined compressive strength from ordinary to high. Through the analysis of the test results it was found that the incorporation of steel fibers in the concrete reduced the crater diameter and restrained the initiation and propagation of cracking, but did not have a significant effect on the penetration depth.

  8. Resistance of plain and steel fiber-reinforced concrete slabs against short ogival projectiles impact

    NASA Astrophysics Data System (ADS)

    Mu, Zhongcheng; Zhang, Wei; Pang, Paojun; Yang, Zhenqi

    2009-12-01

    Due to the enhanced energy absorption characteristics, the steel fiber-reinforced concrete (SFPC) structures gains more and more attention in the civilian and military ballistic protection structures when comparing with the plain concrete (PC) ones. By comparison on the penetration depth, the crater volume on impact face of the target and the debris cloud topography, the resistance of PC and SFPC slabs against projectiles impacting was investigated experimentally in a two-stage light-gas gun. In order to more widespread understand the effect of steel fibers against projectiles impacting, five different types of concrete slabs were done in the range of unconfined compressive strength from ordinary to high. Through the analysis of the test results it was found that the incorporation of steel fibers in the concrete reduced the crater diameter and restrained the initiation and propagation of cracking, but did not have a significant effect on the penetration depth.

  9. The effect of chloride ion concentration gradients on the initiation of localized corrosion of steel in reinforced concrete

    SciTech Connect

    Kane, M.J.; Brown, R.

    1994-12-31

    It has been established that for steel reinforced concrete roads treated with deicing salts or exposed to a marine environment, chloride ions are introduced at the surface of the concrete structure. Two models were discussed in which chloride ion concentration gradients would form in a steel reinforced concrete structure. Electrochemical testing to investigate the models was conducted on plain carbon steel specimens in a simulated concrete environment of saturated calcium hydroxide solution with varying concentrations of sodium chloride. The varying chloride ion concentrations promoted open circuit potential shifts. These potential shifts may lead to galvanic corrosion effects depending on the chloride ion concentration gradients in the structure.

  10. Reliability and flexural behavior of triangular and T-reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Al-Ansari, Mohammed S.

    2015-12-01

    The paper studied the behavior of reinforced concrete triangular and T-beams. Three reinforced concrete beams were tested experimentally and analyzed analytically using the finite element method. Their reliability was also assessed using the reliability index approach. The results showed that the finite element vertical displacements compared well with those obtained experimentally. They also showed that the vertical displacements obtained using the finite element method were larger than those obtained experimentally. This is a strong indication that the finite element results were conservative and reliable. The results showed that the triangular beams exhibited higher ductility at failure than did the T-beam. The plastic deformations at failure of the triangular beams were higher than that of the T-beam. This is a strong indication of the higher ductility of the triangular beams compared to the T-beam. Triangular beams exhibited smaller cracks than did T-beams for equal areas of steel and concrete. The design moment strengths M c computed using the American Concrete Institute (ACI) design formulation were safe and close to those computed using experimental results. The experimental results validated the reliability analysis results, which stated that the triangular beams are more reliable than T-beams for equal areas of steel and concrete.

  11. Carbon paint anode for reinforced concrete bridges in coastal environments

    SciTech Connect

    Cramer, Stephen D.; Bullard, Sophie J.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Russell, James H.; Cryer, C.B.; Laylor, H.M.

    2002-01-01

    Solvent-based acrylic carbon paint anodes were installed on the north approach spans of the Yaquina Bay Bridge (Newport OR) in 1985. The anodes continue to perform satisfactorily after more than 15 years service. The anodes were inexpensive to apply and field repairs are easily made. Depolarization potentials are consistently above 100 mV with long-term current densities around 2 mA/m 2. Bond strength remains adequate, averaging 0.50 MPa (73 psi). Some deterioration of the anode-concrete interface has occurred in the form of cracks and about 4% of the bond strength measurements indicated low or no bond. Carbon anode consumption appears low. The dominant long-term anode reaction appears to be chlorine evolution, which results in limited further acidification of the anode-concrete interface. Chloride profiles were depressed compared to some other coastal bridges suggesting chloride extraction by the CP system. Further evidence of outward chloride migration was a flat chloride profile between the anode and the outer rebar.

  12. Field applications of a carbon fiber sheet material for strengthening reinforced concrete structure

    SciTech Connect

    Thomas, J.; Kliger, H.S.; Yoshizawa, Hiroyuki

    1996-12-31

    Forca Tow Sheet is now being introduced into the USA as a viable alternative to conventional concrete strengthen techniques. This carbon fiber shoot material is externally bonded to reinforced concrete and masonry structures and serves to strengthen existing conditions. Based on the growing use of Tow Sheet in the Japanese market die US infrastructure market is beginning to apply this technology on a number of diverse repair projects. This paper describes actual field applications on industrial and public structures in the US and Japan. Also included are the results of one yen of monitoring of die Japanese structure.

  13. Recycled and virgin plastics in fiber reinforced concrete. Final report, October 1994--August 1997

    SciTech Connect

    Tawfiq, K.S.

    1998-08-30

    The primary objectives of this study is to conduct a laboratory investigation to evaluate the intrinsic stress that can cause cracking of concrete mixed recommended by the Florida Department of Transportation with the addition of monofilament and fibrillated polypropylene and monofilament polyolefin fibers, subjected to highly cyclic loading. In addition, the flexural behavior of concrete reinforced with recycled post-consumer in-house made fibers will be study and Finite Element Methods (FEM) following laboratory work would be used to establish comparable numerical models for the flexural test and pavement overlays.

  14. The determination of the constitutive parameters of a medium with application to a reinforced concrete pad

    NASA Technical Reports Server (NTRS)

    Poggio, A. J.; Burke, G. L.; Pennock, S. T.

    1995-01-01

    This report describes the experimental and analytical efforts performed to determine the constitutive parameters of a reinforced concrete pad on which an aircraft (the NASA Boeing 757) was parked while its internal electromagnetic environment was measured. This concrete pad is part of the Large Electromagnetic System-Level Illuminator (LESLI) test facility at the Phillips Laboratory, Kirtland Air Force Base, New Mexico. The relative dielectric constant, conductivity, index of refraction, and reflection coefficient have been determined over the frequency range of 0 to 300 MHz and are presented.

  15. Time reverse modeling of acoustic emissions in a reinforced concrete beam.

    PubMed

    Kocur, Georg Karl; Saenger, Erik H; Grosse, Christian U; Vogel, Thomas

    2016-02-01

    The time reverse modeling (TRM) is applied for signal-based acoustic emission (AE) analysis of reinforced concrete (RC) specimens. TRM uses signals obtained from physical experiments as input. The signals are re-emitted numerically into a structure in a time-reversed manner, where the wavefronts interfere and appear as dominant concentrations of energy at the origin of the AE. The experimental and numerical results presented for selected AE signals confirm that TRM is capable of localizing AE activity in RC caused by concrete cracking. The accuracy of the TRM results is corroborated by three-dimensional crack distributions obtained from X-ray computed tomography images.

  16. Time reverse modeling of acoustic emissions in a reinforced concrete beam.

    PubMed

    Kocur, Georg Karl; Saenger, Erik H; Grosse, Christian U; Vogel, Thomas

    2016-02-01

    The time reverse modeling (TRM) is applied for signal-based acoustic emission (AE) analysis of reinforced concrete (RC) specimens. TRM uses signals obtained from physical experiments as input. The signals are re-emitted numerically into a structure in a time-reversed manner, where the wavefronts interfere and appear as dominant concentrations of energy at the origin of the AE. The experimental and numerical results presented for selected AE signals confirm that TRM is capable of localizing AE activity in RC caused by concrete cracking. The accuracy of the TRM results is corroborated by three-dimensional crack distributions obtained from X-ray computed tomography images. PMID:26518525

  17. Dynamic response of concrete beams externally reinforced with carbon fiber reinforced plastic (CFRP) subjected to impulsive loads

    SciTech Connect

    Jerome, D.M.; Ross, C.A.

    1996-12-31

    A series of 54 laboratory scale concrete beams 3 x 3 x 30 in. in size were impulsively loaded to failure in a drop weight impact machine. The beams had no internal reinforcement, but instead were externally reinforced on the bottom or tension side of the beams with 1, 2, and 3 ply AS4C/1919 graphite epoxy panels. In addition, several of the beams were also reinforced on the sides with 3 ply CFRP. The beams were simply supported in a drop weight machine and subjected to impact loads with amplitudes up to 10 kips, and durations less than 1 ms, at beam midspan. Measurements made during the loading event included beam total load, midspan displacement, as well as midspan strain at 3 locations in the beam`s cross-section. A high speed framing camera was also used to record the beam`s displacement-time behavior as well as to gain insight into the failure mechanisms. Beam midspan accelerations were determined by double differentiation of the displacement versus time data, and in turn, the beam`s inertial loads were calculated using the beam`s equivalent mass. Beam dynamic bending loads versus time were determined from the difference between the total load versus time and the inertial load versus time data. Bending loads versus displacements were also determined along with fracture energies. Failure to correct the loads for inertia will result in incorrect conclusions being drawn from the data, especially for bending resistance of brittle concrete test specimens. A comparison with quasistatic bending (fracture) energy data showed that the dynamic failure energy absorbed by the beams was always less than the static fracture energy, due to the brittle nature of concrete when impulsively loaded.

  18. A micromorphic model for steel fiber reinforced concrete.

    PubMed

    Oliver, J; Mora, D F; Huespe, A E; Weyler, R

    2012-10-15

    A new formulation to model the mechanical behavior of high performance fiber reinforced cement composites with arbitrarily oriented short fibers is presented. The formulation can be considered as a two scale approach, in which the macroscopic model, at the structural level, takes into account the mesostructural phenomenon associated with the fiber-matrix interface bond/slip process. This phenomenon is contemplated by including, in the macroscopic description, a micromorphic field representing the relative fiber-cement displacement. Then, the theoretical framework, from which the governing equations of the problem are derived, can be assimilated to a specific case of the material multifield theory. The balance equation derived for this model, connecting the micro stresses with the micromorphic forces, has a physical meaning related with the fiber-matrix bond slip mechanism. Differently to previous procedures in the literature, addressed to model fiber reinforced composites, where this equation has been added as an additional independent ingredient of the methodology, in the present approach it arises as a natural result derived from the multifield theory. Every component of the composite is defined with a specific free energy and constitutive relation. The mixture theory is adopted to define the overall free energy of the composite, which is assumed to be homogeneously constituted, in the sense that every infinitesimal volume is occupied by all the components in a proportion given by the corresponding volume fraction. The numerical model is assessed by means of a selected set of experiments that prove the viability of the present approach.

  19. Experimental investigation of reinforced concrete beams with and without CFRP wrapping

    NASA Astrophysics Data System (ADS)

    Venkatesha, K. V.; Dinesh, S. V.; Balaji Rao, K.; Bharatkumar, B. H.; Balasubramanian, S. R.; Iyer, Nagesh R.

    2012-11-01

    This paper presents the results of experimental investigations on six reinforced concrete beams, with three different shear span-to-depth ratios, which were tested under two-point loading. The aim of the work was to study the efficacy of Carbon Fibre Reinforced Polymer (CFRP) strips in enhancing shear capacity and/or changing the failure mode from brittle shear failure to ductile flexural failure. The results of the study indicate that while there is a marginal increase in first crack and ultimate loads, it is possible to achieve a change in the failure mode, and the monitored strain gauge data can be used to explain the failure pattern observed.

  20. Flexural behavior of reinforced concrete beams strengthened with advanced composite materials

    SciTech Connect

    Shahawy, M.A.; Beitelman, T.

    1996-12-31

    This paper presents the results of a feasibility study to investigate the flexural behavior of structurally damaged reinforced and prestressed concrete members retrofitted with bonded carbon fiber materials. The effect of CFRP laminates, bonded to the soffit of precracked reinforced concrete rectangular and tee beams, is investigated in terms of flexural strength, deflections, cracking behavior and failure modes. The results indicate that strengthening of significantly cracked structural members by bonding Carbon laminates is structurally efficient and that the retrofitted members are restored to stiffness and strength values nearly equal to or greater than those of the original. The results indicate that the retrofitted members maintained adequate structural integrity and composite action at all stages of testing up to failure.

  1. Seismic fragility of reinforced concrete structures and components for application to nuclear facilities

    SciTech Connect

    Gergely, P.

    1984-09-01

    The failure and fragility analyses of reinforced concrete structures and elements in nuclear reactor facilities within the Seismic Safety Margins Research Program (SSMRP) at the Lawrence Livermore National Laboratory are evaluated. Uncertainties in material modeling, behavior of low shear walls, and seismic risk assessment for nonlinear response receive special attention. Problems with ductility-based spectral deamplification and prediction of the stiffness of reinforced concrete walls at low stress levels are examined. It is recommended to use relatively low damping values in connection with ductility-based response reductions. The study of static nonlinear force-deflection curves is advocated for better nonlinear dynamic response predictions. Several details of the seismic risk analysis of the Zion plant are also evaluated. 73 references.

  2. Digital-image-correlation-based experimental stress analysis of reinforced concrete beams strengthened using carbon composites

    NASA Astrophysics Data System (ADS)

    Helm, Jeffrey; Kurtz, Stephen

    2005-01-01

    The strengthening of reinforced concrete beams through the use of epoxy-bonded carbon composites has been widely researched in the United States since 1991. Despite the widespread attention of researchers, however, there are no reliable methods of predicting the failure of the repaired and strengthened beams by peeling of the fiber reinforced polymer (FRP) material from the parent concrete. To better understand peeling failure, several investigators have presented analytical work to predict the distribution of stresses along the interface between the FRP and the concrete. Several closed-form solutions can be found in the literature to predict the levels of shear stress present between the bonded composite plate and the parent concrete beam. However, there has been very little experimental verification of these analytical predictions because few experiments on large-scale beams have had sufficient instrumentation to facilitate the comparison. Some experiments have been presented1 in which electrical resistance strain gages were placed along the length of the carbon plate in order to deduce the interfacial shear stress using first differences. This method, though very crude, demonstrated that there are substantial differences between the distributions of interfacial shear stresses in actual repaired beams versus the analytical predictions. This paper presents a new test program in which large-scale carbon-fiber-strengthened reinforced concrete beams are load-tested to failure, while employing digital image correlation (DIC) to record the strains in the carbon fiber plate. Relying on the linear elasticity of carbon fiber, the interfacial shear can be determined and compared with the analytical predictions of the literature. The focus of this paper is the presentation of the experimental shear stress distributions and comparisons of these distributions with previous results available in the literature.

  3. Digital-image-correlation-based experimental stress analysis of reinforced concrete beams, strengthened using carbon composites

    NASA Astrophysics Data System (ADS)

    Helm, Jeffrey; Kurtz, Stephen

    2004-12-01

    The strengthening of reinforced concrete beams through the use of epoxy-bonded carbon composites has been widely researched in the United States since 1991. Despite the widespread attention of researchers, however, there are no reliable methods of predicting the failure of the repaired and strengthened beams by peeling of the fiber reinforced polymer (FRP) material from the parent concrete. To better understand peeling failure, several investigators have presented analytical work to predict the distribution of stresses along the interface between the FRP and the concrete. Several closed-form solutions can be found in the literature to predict the levels of shear stress present between the bonded composite plate and the parent concrete beam. However, there has been very little experimental verification of these analytical predictions because few experiments on large-scale beams have had sufficient instrumentation to facilitate the comparison. Some experiments have been presented1 in which electrical resistance strain gages were placed along the length of the carbon plate in order to deduce the interfacial shear stress using first differences. This method, though very crude, demonstrated that there are substantial differences between the distributions of interfacial shear stresses in actual repaired beams versus the analytical predictions. This paper presents a new test program in which large-scale carbon-fiber-strengthened reinforced concrete beams are load-tested to failure, while employing digital image correlation (DIC) to record the strains in the carbon fiber plate. Relying on the linear elasticity of carbon fiber, the interfacial shear can be determined and compared with the analytical predictions of the literature. The focus of this paper is the presentation of the experimental shear stress distributions and comparisons of these distributions with previous results available in the literature.

  4. Analysis and design of on-grade reinforced concrete track support structures

    NASA Technical Reports Server (NTRS)

    Mclean, F. G.; Williams, R. D.; Greening, L. R.

    1972-01-01

    For the improvement of rail service, the Department of Transportation, Federal Rail Administration, is sponsoring a test track on the Atchison, Topeka, and Santa Fe Railway. The test track will contain nine separate rail support structures, including one conventional section for control and three reinforced concrete structures on grade, one slab and two beam sections. The analysis and design of these latter structures was accomplished by means of the finite element method, NASTRAN, and is presented.

  5. A multi-element approach for cathodic protection of reinforced concrete

    SciTech Connect

    Polder, R.B.; Nuiten, P.C. )

    1994-06-01

    A cathodic protection (CP) system was designed and installed on precast concrete cantilever beams that were suffering severe reinforcement corrosion due to mixed-in chloride. Activated titanium strip anodes were placed with a geometry based on laboratory current distribution experiments. The CP system was divided into relatively small zones for easy control and monitoring. Two years of monitoring has shown that the system functions satisfactorily.

  6. Field Testing of High Current Electrokinetic Nanoparticle Treatment for Corrosion Mitigation in Reinforced Concrete

    NASA Technical Reports Server (NTRS)

    Cardenas, Henry; Alexander, Joshua; Kupwade-Patil, Kunal; Calle, Luz marina

    2010-01-01

    Electrokinetic Nanoparticle (EN) treatment was used as a rapid repair measure to mitigate chloride induced corrosion of reinforced concrete in the field. EN treatment uses an electric field to transport positively charged nanoparticles to the reinforcement through the concrete capillary pores. Cylindrical reinforced concrete specimens were batched with 4.5 wt % salt content (based on cement mass). Three distinct electrokinetic treatments were conducted using high current density (up to 5 A/m2) to form a chloride penetration barrier that was established in 5 days, as opposed to the traditional 6-8 weeks, generally required for electrochemical chloride extraction (ECE). These treatments included basic EN treatment, EN with additional calcium treatment, and basic ECE treatment. Field exposures were conducted at the NASA Beachside Corrosion Test Site, Kennedy Space Center, Florida, USA. The specimens were subjected to sea water immersion at the test site as a posttreatment exposure. Following a 30-day post-treatment exposure period, the specimens were subjected to indirect tensile testing to evaluate treatment impact. The EN treated specimens exhibited 60% and 30% increases in tensile strength as compared to the untreated controls and ECE treated specimens respectively. The surfaces of the reinforcement bars of the control specimens were 67% covered by corrosion products. In contrast, the EN treated specimens exhibited corrosion coverage of only 4%. Scanning electron microscopy (SEM) revealed a dense concrete microstructure adjacent to the bars of the treated specimens as compared to the control and ECE specimens. Energy dispersive spectroscopic (EDS) analysis of the polished EN treated specimens showed a reduction in chloride content by a factor of 20 adjacent to the bars. This study demonstrated that EN treatment was successful in forming a chloride penetration barrier rapidly. This work also showed that the chloride barrier was effective when samples were exposed to

  7. Utilization of power plant bottom ash as aggregates in fiber-reinforced cellular concrete.

    PubMed

    Lee, H K; Kim, H K; Hwang, E A

    2010-02-01

    Recently, millions tons of bottom ash wastes from thermoelectric power plants have been disposed of in landfills and coastal areas, regardless of its recycling possibility in construction fields. Fiber-reinforced cellular concrete (FRCC) of low density and of high strength may be attainable through the addition of bottom ash due to its relatively high strength. This paper focuses on evaluating the feasibility of utilizing bottom ash of thermoelectric power plant wastes as aggregates in FRCC. The flow characteristics of cement mortar with bottom ash aggregates and the effect of aggregate type and size on concrete density and compressive strength were investigated. In addition, the effects of adding steel and polypropylene fibers for improving the strength of concrete were also investigated. The results from this study suggest that bottom ash can be applied as a construction material which may not only improve the compressive strength of FRCC significantly but also reduce problems related to bottom ash waste. PMID:19910181

  8. Effect of chlorides on reinforcing steel exposed to simulated concrete solutions

    SciTech Connect

    Kitowski, C.J.; Wheat, H.G.

    1997-03-01

    The behavior of steel in chloride-free and chloride-contaminated simulated concrete solutions was studied to observe the degradation of steel as a result of addition of chlorides. One of the simulated concrete solutions was a saturated calcium hydroxide (Ca[OH]{sub 2}) solution while the other was a solution made up of 0.6 M potassium hydroxide (KOH) + 0.2 M sodium hydroxide (NaOH) + 0.001 M Ca(OH){sub 2}. Corrosion behavior of the steel was studied electrochemically, and changes in the steel surfaces were studied using scanning electron microscopy (SEM) and Auger electron spectroscopy (AES). Behavior was compared to that of reinforced concrete cylinders subjected to alternating wetting and drying in 3.5% sodium chloride (NaCl) solutions.

  9. Evaluation of non-metallic fiber reinforced concrete in new full depth pcc pavements. Final report

    SciTech Connect

    Ramakrishnan, V.; Tolmare, N.S.

    1998-12-30

    This final report presents the construction and performance evaluation of a new full depth pavement, constructed with a new type non-metallic fiber reinforced concrete (NMFRC). The mixture proportions used, the quality control tests conducted for the evaluation of the fresh and hardened concrete properties, the procedure used for mixing, transporting, placing, consolidating, finishing, and curing of the concrete are described. Periodic inspection of the full depth pavement was done and this report includes the results of these inspections. The feasibility of using this NMFRC in the construction of highway structures has been discussed. The new NMFRC with enhanced fatigue, impact resistance, modulus of rupture, ductility and toughness properties is suitable for the construction of full depth pavements. However, a life-cycle cost analysis shows that NMFRC is not a favorable choice, because of it`s high initial cost.

  10. A zinc/hydrogel system for cathodic protection of reinforced concrete structures

    SciTech Connect

    Bennett, J.; Firlotte, C.

    1996-11-01

    A zinc/hydrogel system has been developed for the cathodic protection of steel in reinforced concrete. This system consists of a thin foil of zinc which is attached to the concrete surface by an ionically conductive hydrogel adhesive. A direct electrical connection between the zinc and the reinforcing steel allows the zinc to function galvanically, polarizing the steel and protecting it from corrosion. Zinc, aluminum, and several aluminum alloys were tested as anodes in contact with hydrogel adhesives, and zinc was found to offer the best combination of working potential, resistance to passivation, cost and availability. Several hydrogels used for medical applications were found to be inadequate for this use, but a hydrogel adhesive was developed specifically to bond sacrificial anodes to concrete. This hydrogel achieved a total charge in accelerated testing equal to 12 years of life at current densities normally used for cathodic protection. Zinc/hydrogel was installed on about 1000 ft{sup 2} (100 m{sup 2}) of a fishing pier in Ft. Pierce, Florida on members including prestressed pilings, conventionally reinforced pile caps, and prestressed beams. Installation of this system was relatively easy, and initial performance is encouraging. After 5 months of service, adhesion is good and current densities remain high.

  11. Experimental study on the seismic response of braced reinforced concrete frame with irregular columns

    NASA Astrophysics Data System (ADS)

    Xiao, Jianzhuang; Li, Jie; Chen, Jun

    2011-12-01

    A 15-storey K-braced reinforced concrete model frame with irregular columns, i.e., T-shaped, L-shaped, as well as +-shaped columns, was constructed and tested on the six-degree-of-freedom shaking table at the State Key Laboratory for Disaster Reduction in Civil Engineering in Tongji, China. Two types of earthquake records, El-Centro wave (south-north direction) and Shanghai artifi cial wave (SHAW) with various peak accelerations and principal-secondary sequences, were input and experimentally studied. Based on the shaking table tests and theoretical analysis, several observations can be made. The failure sequence of the model structure is brace→beam→column→joints, so that the design philosophy for several lines of defense has been achieved. Earthquake waves with different spectrums not only infl uence the magnitude and distribution of the earthquake force and the storey shear force, but also obviously affect the magnitude of the displacement response. The aftershock seismic response of previously damaged reinforced concrete braced frames with irregular columns possesses the equivalent elastic performance characteristic. Generally speaking, from the aspects of failure features and drift ratio, this type of reinforced concrete structure provides adequate earthquake resistance and can be promoted for use in China.

  12. Application of fiber-reinforced plastic rods as prestressing tendons in concrete structures. Final report

    SciTech Connect

    Mattock, A.H.; Babaei, K.

    1989-08-01

    The study is concerned with the possibility of utilizing fiber-reinforced plastic rods as prestressing tendons, in place of traditional steel tendons, in elements of prestressed-concrete bridges exposed to corrosive environments. A survey was made of available information on the behavior characteristics of fiber-reinforced plastic tension elements and, in particular, those of glass-fiber-reinforced (GFR) tension elements. Also, an analytical study was made of the flexural behavior of concrete elements prestressed by GFR tendons. Based on the analytical study and on the survey of available information, an assessment is made of the impact on the design of prestressed-concrete members if GFR tendons are used. Some preliminary design recommendations are made, together with proposals for research needed before GFR prestressing tendons should be used in practice. Four GFR tendons with Con-Tech Systems anchorages were tested, the primary variable being the embedded length of the GFR rods in the anchorages. All the tendons failed by the rods pulling out of the anchorages. For embedded lengths of 15.2 in or greater, the failure loads were 90% of the advertised tendon strength of 220 ksi, or about 100% of the guaranteed tensile strength of 197 ksi (60 kN/rod).

  13. Corrosion detection in steel-reinforced concrete using a spectroscopic technique

    NASA Astrophysics Data System (ADS)

    Garboczi, E. J.; Stutzman, P. E.; Wang, S.; Martys, N. S.; Hassan, A. M.; Duthinh, D.; Provenzano, V.; Chou, S. G.; Plusquellic, D. F.; Surek, J. T.; Kim, S.; McMichael, R. D.; Stiles, M. D.

    2014-02-01

    Detecting the early corrosion of steel that is embedded in reinforced concrete (rebar) is a goal that would greatly facilitate the inspection and measurement of corrosion in the US physical infrastructure. Since 2010, the National Institute of Standards and Technology (NIST) has been working on a large project to develop an electromagnetic (EM) probe that detects the specific corrosion products via spectroscopic means. Several principal iron corrosion products, such as hematite and goethite, are antiferromagnetic at field temperatures. At a given applied EM frequency, which depends on temperature, these compounds undergo a unique absorption resonance that identifies the presence of these particular iron corrosion products. The frequency of the resonances tends to be on the order of 100 GHz or higher, so transmitting EM waves through the cover concrete and back out again at a detectable level has been challenging. NIST has successfully detected these two iron corrosion products, and is developing equipment and methodologies that will be capable of penetrating the typical 50 mm of cover concrete in the field. The novel part of this project is the detection of specific compounds, rather than only geometrical changes in rebar cross-section. This method has the potential of providing an early-corrosion probe for steel in reinforced concrete, and for other applications where steel is covered by various layers and coatings.

  14. Field Testing of High Current Electrokinetic Nanoparticle Treatment for Corrosion Mitigation in Reinforced Concrete

    NASA Technical Reports Server (NTRS)

    Calle, Luz Marina; Alexander, Joshua B.; Cardenas, Henry E.; Kupwade-Patil, Kunal

    2008-01-01

    This work examines field performance of nanoscale pozzolan treatments delivered el ctrokinetically to suppress chloride induced corrosion of concrete reinforcement. The particles are 20 nm silica spheres coated with 2 nm alumina particles that carry a net positive charge. Earlier work demonstrated that the alumina particles were stripped from the silica carriers and formed a dense phase with an interparticle spacing that is small enough to inhibit the transport of solvated chlorides. A D.C. field was used to inject the particles into the pores of concrete specimens, directly toward the mild steel bars that were embedded within each 3 inch diameter by 6 inch length concrete specimen. The voltage was held constant at 25 v per inch of concrete cover for a period of 7 days. These voltages permitted current densities as high as 3 A/sq m. During the final 3 days, a 1 molar solution of calcium nitrate tetrahydrate was used to provide a source of calcium to facilitate stronger and more densified phase formation within the pores. In a departure from prior work the particle treatments were started concurrent with chloride extraction in order to determine if particle delivery would inhibit chloride transport. Following treatment the specimens were immersed in seawater for 4 weeks. After this posttreatment exposure, the specimens were tested for tensile strength and the steel reinforcement was examined for evidence of corrosion. Scanning electron microscopy was conducted to assess impact on microstructure.

  15. Strut deformation in CFRP-strengthened reinforced concrete deep beams.

    PubMed

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2014-01-01

    Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced polymer (CFRP) as lightweight material with high tensile strength for strengthening D-regions is currently on the increase. However, the CFRP-strengthening of deep beam complicates the dimensions estimation of bottle-shaped strut. Therefore, this research aimed to investigate the effect of CFRP-strengthening on the deformation of RC strut in the design of deep beams. Two groups of specimens comprising six unstrengthened and six CFRP-strengthened RC deep beams with the shear span to the effective depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were constructed in this research. These beams were tested under four-point bending configuration. The deformation of struts was experimentally evaluated using the values of strain along and perpendicular to the strut centreline. The evaluation was made by the comparisons between unstrengthened and CFRP-strengthened struts regarding the widening and shortening. The key variables were a/d ratio and applied load level.

  16. Strut Deformation in CFRP-Strengthened Reinforced Concrete Deep Beams

    PubMed Central

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2014-01-01

    Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced polymer (CFRP) as lightweight material with high tensile strength for strengthening D-regions is currently on the increase. However, the CFRP-strengthening of deep beam complicates the dimensions estimation of bottle-shaped strut. Therefore, this research aimed to investigate the effect of CFRP-strengthening on the deformation of RC strut in the design of deep beams. Two groups of specimens comprising six unstrengthened and six CFRP-strengthened RC deep beams with the shear span to the effective depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were constructed in this research. These beams were tested under four-point bending configuration. The deformation of struts was experimentally evaluated using the values of strain along and perpendicular to the strut centreline. The evaluation was made by the comparisons between unstrengthened and CFRP-strengthened struts regarding the widening and shortening. The key variables were a/d ratio and applied load level. PMID:25197698

  17. Strut deformation in CFRP-strengthened reinforced concrete deep beams.

    PubMed

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2014-01-01

    Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced polymer (CFRP) as lightweight material with high tensile strength for strengthening D-regions is currently on the increase. However, the CFRP-strengthening of deep beam complicates the dimensions estimation of bottle-shaped strut. Therefore, this research aimed to investigate the effect of CFRP-strengthening on the deformation of RC strut in the design of deep beams. Two groups of specimens comprising six unstrengthened and six CFRP-strengthened RC deep beams with the shear span to the effective depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were constructed in this research. These beams were tested under four-point bending configuration. The deformation of struts was experimentally evaluated using the values of strain along and perpendicular to the strut centreline. The evaluation was made by the comparisons between unstrengthened and CFRP-strengthened struts regarding the widening and shortening. The key variables were a/d ratio and applied load level. PMID:25197698

  18. Impact Resistance Behaviour of Light Weight Rice Husk Concrete with Bamboo Reinforcement

    NASA Astrophysics Data System (ADS)

    Che Muda, Zakaria; Beddu, Salmia; Syamsir, Agusril; Sigar Ating, Joshua; Liyana Mohd Kamal, Nur; Nasharuddin Mustapha, Kamal; Thiruchelvam, Sivadass; Usman, Fathoni; Ashraful Alam, Md; Birima, Ahmed H.; Zaroog, O. S.

    2016-03-01

    This paper investigate the performance of lightweight rice husk concrete (LWRHC) with varied bamboo reinforcement content for the concrete slab of 300mm × 300mm size reinforced with varied slab thickness subjected to low impact projectile test. A self-fabricated drop-weight impact test rig with a steel ball weight of 1.236 kg drop at 0.65 m height has been used in this research work. The main variables for the study is to find the relationship of the impact resistance against the amount of bamboo reinforcement and slab thickness. A linear relationship has been established between first and ultimate crack resistance against bamboo diameters and slab thickness by the experiment. The linear relationship has also been established between the service (first) crack and ultimate crack resistance against the bamboo reinforcement diameter and slab thickness. 5% RH content exhibit better first and ultimate crack resistance up to 1.80 times and up to 1.72 times respectively against 10% RH content.

  19. Nonlinear FE simulations of structural behavior parameters of reinforced concrete beam with epoxy-bonded FRP

    NASA Astrophysics Data System (ADS)

    Sasmal, Saptarshi; Kalidoss, S.

    2015-05-01

    In the present study, investigations on fiber-reinforced plastic (FRP) plated-reinforced concrete (RC) beam are carried out. Numerical investigations are performed by using a nonlinear finite element analysis by incorporating cracking and crushing of concrete. The numerical models developed in the present study are validated with the results obtained from the experiment under monotonic load using the servo-hydraulic actuator in displacement control mode. Further, the validated numerical models are used to evaluate the influence of different parameters. It is found from the investigations that increase in the elastic modulus of adhesive layer and CFRP laminate increases the interfacial stresses whereas increase in laminate modulus decreases the displacement and reinforcement strain of the beam. It is also observed that increase in the adhesive layer can largely reduce the interfacial stresses, whereas increase in laminate thickness increases it. However, increase in laminate thickness decreases the displacement and reinforcement strain of the beam significantly. It is mention worthy that increase in laminate length reduces the interfacial stresses, whereas CFRP width change does not affect the interfacial stresses. The study will be useful for the design and practicing engineers for arriving at the FRP-based strengthening schemes for RC structures judiciously.

  20. Application of the wave finite element method to reinforced concrete structures with damage

    NASA Astrophysics Data System (ADS)

    El Masri, Evelyne; Ferguson, Neil; Waters, Timothy

    2016-09-01

    Vibration based methods are commonly deployed to detect structural damage using sensors placed remotely from potential damage sites. Whilst many such techniques are modal based there are advantages to adopting a wave approach, in which case it is essential to characterise wave propagation in the structure. The Wave Finite Element method (WFE) is an efficient approach to predicting the response of a composite waveguide using a conventional FE model of a just a short segment. The method has previously been applied to different structures such as laminated plates, thinwalled structures and fluid-filled pipes. In this paper, the WFE method is applied to a steel reinforced concrete beam. Dispersion curves and wave mode shapes are first presented from free wave solutions, and these are found to be insensitive to loss of thickness in a single reinforcing bar. A reinforced beam with localised damage is then considered by coupling an FE model of a short damaged segment into the WFE model of the undamaged beam. The fundamental bending, torsion and axial waves are unaffected by the damage but some higher order waves of the cross section are significantly reflected close to their cut-on frequencies. The potential of this approach for detecting corrosion and delamination in reinforced concrete beams will be investigated in future work.

  1. Impact resistance of sustainable construction material using light weight oil palm shells reinforced geogrid concrete slab

    NASA Astrophysics Data System (ADS)

    Muda, Z. C.; Malik, G.; Usman, F.; Beddu, S.; Alam, M. A.; Mustapha, K. N.; Birima, A. H.; Zarroq, O. S.; Sidek, L. M.; Rashid, M. A.

    2013-06-01

    This paper investigate the performance of lightweight oil palm shells (OPS) concrete slab with geogrid reinforcement of 300mm × 300mm size with 20mm, 30mm and 40 mm thick casted with different geogrid orientation and boundary conditions subjected to low impact projectile test. A self-fabricated drop-weight impact test rig with a steel ball weight of 1.2 kg drop at 1 m height has been used in this research work. The main variables for the study is to find the relationship of the impact resistance the slab thickness, boundary conditions and geogrid reinforcement orientation. Test results indicate that the used of the geogrid reinforcement increased the impact resistance under service (first) limit crack up to 5.9 times and at ultimate limit crack up to 20.1 times against the control sample (without geogrid). A good linear relationship has been established between first and ultimate crack resistance against the slab thickness. The orientation of the geogrid has minor significant to the crack resistance of the OPS concrete slab. OPS geogrid reinforced slab has a good crack resistance properties that can be utilized as a sustainable impact resistance construction materials.

  2. Accelerated corrosion of steel in dry-cast reinforced concrete pipes after initiation

    NASA Astrophysics Data System (ADS)

    Weber, Brian William

    Instrumented dry-cast reinforced concrete pipe (DC-RCP) specimens in which corrosion of the reinforcing steel had initiated were selected to accelerate the corrosion. Type C and type F DC-RCP were used. An anodic current density of various magnitudes (0.5 muA/cm2, 1 muA/cm2 and 2.5 muA/cm2) was applied during the corrosion propagation stage. The specimens were placed in high humidity and selected specimens were later covered with wet sand. Selected specimens were terminated for visual examination and gravimetric analysis. Typically, the reinforcement potentials during the accelerated corrosion period were more negative for F specimens compared to C specimens. The C specimens experienced ~2x more corrosion than the F specimens. The accumulated corrosion products did not cause cracks. A method was developed that allows for modest corrosion acceleration during the corrosion propagation stage of DC-RCP.

  3. Reinforced concrete structures loaded by snow avalanches : numerical and experimental approaches.

    NASA Astrophysics Data System (ADS)

    Ousset, I.; Bertrand, D.; Brun, M.; Limam, A.; Naaim, M.

    2012-04-01

    Today, due to the extension of occupied areas in mountainous regions, new strategies for risk mitigation have to be developed. In the framework of risk analysis, these latter have to take into account not only the natural hazard description but also the physical vulnerability of the exposed structures. From a civil engineering point of view, the dynamic behavior of column or portico was widely investigated especially in the case of reinforced concrete and steel. However, it is not the case of reinforced concrete walls for which only the in-plan dynamic behavior (shear behavior) has been studied in detail in the field of earthquake engineering. Therefore, the aim of this project is to study the behavior of reinforced concrete civil engineering structures submitted to out-of-plan dynamic loadings coming from snow avalanche interaction. Numerical simulations in 2D or 3D by the finite element method (FEM) are presented. The approach allows solving mechanical problems in dynamic condition involving none linearities (especially none linear materials). Thus, the structure mechanical response can be explored in controlled conditions. First, a reinforced concrete wall with a L-like shape is considered. The structure is supposed to represent a French defense structure dedicated to protect people against snow avalanches. Experimental pushover tests have been performed on a physical model. The experimental tests consisted to apply a uniform distribution of pressure until the total collapse of the wall. A 2D numerical model has been developed to simulate the mechanical response of the structure under quasi-static loading. Numerical simulations have been compared to experimental datas and results gave a better understanding of the failure mode of the wall. Moreover, the influence of several parameters (geometry and the mechanical properties) is also presented. Secondly, punching shear experimental tests have also been carried out. Reinforced concrete slabs simply supported have

  4. Seismic load tests on reinforced concrete beam-column sandwich joints with strengthening measures

    NASA Astrophysics Data System (ADS)

    Yang, Zhi-Hong; Li, Ying-Min; Liu, Jian-Wei

    2009-12-01

    Reinforced concrete high-rise buildings with high strength concrete (HSC) column and normal strength concrete (NSC) floor are popular nowadays. For these structures, it is ineffective to construct beam-column joint with high strength concrete. So beam-column joints with normal strength concrete attract abundant attention and are strongly recommended in china recent years. In this paper, we refer to this type of joints as sandwich joints. In order to improve seismic behavior of sandwich joints with high stress, strengthening measures including addition of vertical dowels, addition of diagonal bars, and enhancement of joint constraint were proposed to apply to engineering practice recent years. In this paper, 6 full scale sandwich joint specimens were test under cyclic load to investigate the validity of strengthening measures. Tested specimens were consist of 1 specimen with additional vertical dowels, 2 specimens with additional diagonal bars, and 1 specimen with additional lateral beams, compared with 2 specimens without strengthening measures. Integrated seismic performances of these specimens were studied, such as load resistance behavior, deflection performance, ductility, energy dissipation behavior, beam bars anchorage capacity and so on. Based on the experimental results, the effect and mechanical behavior of strengthening measures were analyzed.

  5. Seismic load tests on reinforced concrete beam-column sandwich joints with strengthening measures

    NASA Astrophysics Data System (ADS)

    Yang, Zhi-hong; Li, Ying-min; Liu, Jian-wei

    2010-03-01

    Reinforced concrete high-rise buildings with high strength concrete (HSC) column and normal strength concrete (NSC) floor are popular nowadays. For these structures, it is ineffective to construct beam-column joint with high strength concrete. So beam-column joints with normal strength concrete attract abundant attention and are strongly recommended in china recent years. In this paper, we refer to this type of joints as sandwich joints. In order to improve seismic behavior of sandwich joints with high stress, strengthening measures including addition of vertical dowels, addition of diagonal bars, and enhancement of joint constraint were proposed to apply to engineering practice recent years. In this paper, 6 full scale sandwich joint specimens were test under cyclic load to investigate the validity of strengthening measures. Tested specimens were consist of 1 specimen with additional vertical dowels, 2 specimens with additional diagonal bars, and 1 specimen with additional lateral beams, compared with 2 specimens without strengthening measures. Integrated seismic performances of these specimens were studied, such as load resistance behavior, deflection performance, ductility, energy dissipation behavior, beam bars anchorage capacity and so on. Based on the experimental results, the effect and mechanical behavior of strengthening measures were analyzed.

  6. Analytical and Experimental Studies of the Seismic Performance of Reinforced Concrete Structural Wall Boundary Elements

    NASA Astrophysics Data System (ADS)

    Hilson, Christopher William

    Following the February 27, 2010 Mw 8.8 Maule earthquake, an international effort was undertaken to better understand reasons for observed damage to concrete structural walls in buildings located in the affected region of Chile and to address potential design implications. The Chilean building code for concrete structures is based on the U.S. ACI 318 building code; however, based on the observed performance of over 400 buildings in the March 1985 earthquake-impacted Vina del Mar, Chilean Code NCh433.Of96 included an exception that special boundary elements (SBEs)---which are commonly required for walls in U.S. buildings---need not be provided. By taking exception to the special boundary element detailing provisions, the Chilean code allowed thin wall boundary zones with relatively large (typically 20 cm) spacing of transverse reinforcement (essentially unconfined) to be constructed. Given these differences, the 2010 earthquake is an excellent opportunity to assess the performance of reinforced concrete buildings designed using modern codes similar to those used in the United States. Data from damaged and undamaged buildings, as well as from parametric and experimental studies, are used to provide recommendations to improve the efficacy of U.S. provisions designed to inhibit structural damage at wall boundaries. Seven Chilean buildings were selected to investigate the performance of boundary elements during the 2010 earthquake. Several walls from each of the seven buildings were chosen to evaluate the ACI 318-11 Section 21.9.6.2 displacement-based trigger equation for determining if SBEs would have been required and if observed damage was consistent with the evaluation result (i.e., SBE required, no damage; SBE required, damage observed). The propensity of boundary longitudinal reinforcement to buckle was also investigated, taking into consideration the influence of boundary transverse reinforcement configuration and longitudinal reinforcement strain history. In

  7. Numerical simulation of the effect of blast and penetration on reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Mencarelli, Andrea

    as well as unconfined, confined, hydrostatic, and triaxial compression behavior. LDPM will be calibrated and validated simulating a group of experimental tests both in compression and tension. Regarding compression: uniaxial confined and unconfined, biaxial, triaxial, and hydrostatic tests will be simulated, considering also cases of cyclic loads. Regarding tension: three point bending and splitting tests will be simulated. In every test stress-strain or force-displacement results and failure modes will be compared, with very good agreement, with the experimental results. LDPM will be extended to simulate rate effect, and a group of experimental test simulations will be presented. Uniaxial unconfined compression and Hopkinson Bar in tension will be simulated to calibrate and validate the dynamic parameters. LDPM dynamic implementation will be used to investigate brick fragmentation, projectile impact on reinforced concrete walls, and wall subjected to blast. Finally, conclusions will be discussed: model capabilities will be summarized, and future works will be listed.

  8. Monitoring of transverse displacement of reinforced concrete beams under flexural loading with embedded arrays of optical fibers

    NASA Astrophysics Data System (ADS)

    Gonzalez-Tinoco, Juan E.; Gomez-Rosas, Enrique R.; Guzmán-Olguín, Héctor; Khotiaintsev, Sergei; Zuñiga-Bravo, Miguel A.

    2015-04-01

    We present results of an ongoing study of structural health monitoring of concrete elements by means of arrays of telecommunications-grade optical fibers embedded in such elements. In this work, we show a possibility of using this technique for monitoring the transverse displacement of the reinforced concrete beams under flexural loading. We embedded a number of multimode silica-core/polymer-clad/polymer-coated optical fibers in a mold with preinstalled reinforcing steel bars and fresh concrete mix. Then the concrete was compacted and cured. Some optical fibers were broken during the fabrication process. The fiber survival rate varied with concrete grade, compacting technique and optical fiber type. The fibers that survived the fabrication process were employed for the monitoring. They were connected to the optical transmitter and receiver that formed a part of a larger measurement system. The system continuously measured the optical transmission of all optical fibers while the reinforced concrete beams were subjected to incremental transverse loading. We observed a quasi-linear decrease in optical transmission in all optical fibers of the array vs. the applied load and respective flexural displacement. Although the underlying phenomena that lead to such a variation in optical transmission are not clear yet, the observed behavior might be of interest for assessing the transverse displacement of the reinforced concrete beams under flexural loading.

  9. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    NASA Astrophysics Data System (ADS)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  10. Numerical Investigations of the Behavior of Plain and Reinforced Concrete Subjected to Explosive Loading

    NASA Astrophysics Data System (ADS)

    Antoun, Tarabay; Clarke, Douglas; Glenn, Lewis; Moran, Bill

    1999-06-01

    This paper describes computer code simulations aimed at investigating the behavior of concrete subjected to explosive loading. Two different damage models with varying degrees of complexity are used to represent the behavior of concrete in the simulations. The first model is a rate-independent scalar damage model that uses tensile stress and accumulated plastic strain as threshold criteria for damage accumulation. An empirical equation is used to transition the material from an undamaged state to a fully damaged state. The second model is a time-dependent scalar damage model that includes evolution laws for brittle, ductile and compressive damage. An important feature of this model is a time-to-failure parameter that depends on local conditions. This parameter controls the growth rate of damage. Damage-induced degradation is taken into account through the use of a Mohr-Coulomb surface the size of which decreases with increasing damage. Both these damage models are coupled with pore crushing models to describe the volumetric response. These models are used to simulate the behavior of explosively loaded concrete blocks, both plain and reinforced. The differences and similarities between the results obtained using the two damage models are discussed, along with the effects of steel reinforcing on the observed response.

  11. A micromechanical approach to elastic and viscoelastic properties of fiber reinforced concrete

    SciTech Connect

    Pasa Dutra, V.F.; Maghous, S. Campos Filho, A.; Pacheco, A.R.

    2010-03-15

    Some aspects of the constitutive behavior of fiber reinforced concrete (FRC) are investigated within a micromechanical framework. Special emphasis is put on the prediction of creep of such materials. The linear elastic behavior is first examined by implementation of a Mori-Tanaka homogenization scheme. The micromechanical predictions for the overall stiffness prove to be very close to finite element solutions obtained from the numerical analysis of a representative elementary volume of FRC modeled as a randomly heterogeneous medium. The validation of the micromechanical concepts based on comparison with a set of experiments, shows remarkable predictive capabilities of the micromechanical representation. The second part of the paper is devoted to non-ageing viscoelasticity of FRC. Adopting a Zener model for the behavior of the concrete matrix and making use of the correspondence principle, the homogenized relaxation moduli are derived analytically. The validity of the model is established by mean of comparison with available experiment measurements of creep strain of steel fiber reinforced concrete under compressive load. Finally, the model predictions are compared to those derived from analytical models formulated within a one-dimensional setting.

  12. Experimental Study on the Strength Characteristics and Water Permeability of Hybrid Steel Fibre Reinforced Concrete

    PubMed Central

    Singh, M. P.; Singh, S. P.; Singh, A. P.

    2014-01-01

    Results of an investigation conducted to study the effect of fibre hybridization on the strength characteristics such as compressive strength, split tensile strength, and water permeability of steel fibre reinforced concrete (SFRC) are presented. Steel fibres of different lengths, that is, 12.5 mm, 25 mm, and 50 mm, having constant diameter of 0.6 mm, were systematically combined in different mix proportions to obtain mono, binary, and ternary combinations at each of 0.5%, 1.0%, and 1.5% fibre volume fraction. A concrete mix containing no fibres was also cast for reference purpose. A total number of 1440 cube specimens of size 100∗100∗100 mm were tested, 480 each for compressive strength, split tensile strength, and water permeability at 7, 28, 90, and 120 days of curing. It has been observed from the results of this investigation that a fibre combination of 33% 12.5 mm + 33% 25 mm + 33% 50 mm long fibres can be adjudged as the most appropriate combination to be employed in hybrid steel fibre reinforced concrete (HySFRC) for optimum performance in terms of compressive strength, split tensile strength and water permeability requirements taken together. PMID:27379298

  13. Experimental Study on the Strength Characteristics and Water Permeability of Hybrid Steel Fibre Reinforced Concrete.

    PubMed

    Singh, M P; Singh, S P; Singh, A P

    2014-01-01

    Results of an investigation conducted to study the effect of fibre hybridization on the strength characteristics such as compressive strength, split tensile strength, and water permeability of steel fibre reinforced concrete (SFRC) are presented. Steel fibres of different lengths, that is, 12.5 mm, 25 mm, and 50 mm, having constant diameter of 0.6 mm, were systematically combined in different mix proportions to obtain mono, binary, and ternary combinations at each of 0.5%, 1.0%, and 1.5% fibre volume fraction. A concrete mix containing no fibres was also cast for reference purpose. A total number of 1440 cube specimens of size 100∗100∗100 mm were tested, 480 each for compressive strength, split tensile strength, and water permeability at 7, 28, 90, and 120 days of curing. It has been observed from the results of this investigation that a fibre combination of 33% 12.5 mm + 33% 25 mm + 33% 50 mm long fibres can be adjudged as the most appropriate combination to be employed in hybrid steel fibre reinforced concrete (HySFRC) for optimum performance in terms of compressive strength, split tensile strength and water permeability requirements taken together.

  14. A Wireless Passive Sensing System for Displacement/Strain Measurement in Reinforced Concrete Members.

    PubMed

    Ozbey, Burak; Erturk, Vakur B; Demir, Hilmi Volkan; Altintas, Ayhan; Kurc, Ozgur

    2016-01-01

    In this study, we show a wireless passive sensing system embedded in a reinforced concrete member successfully being employed for the measurement of relative displacement and strain in a simply supported beam experiment. The system utilizes electromagnetic coupling between the transceiver antenna located outside the beam, and the sensing probes placed on the reinforcing bar (rebar) surface inside the beam. The probes were designed in the form of a nested split-ring resonator, a metamaterial-based structure chosen for its compact size and high sensitivity/resolution, which is at µm/microstrains level. Experiments were performed in both the elastic and plastic deformation cases of steel rebars, and the sensing system was demonstrated to acquire telemetric data in both cases. The wireless measurement results from multiple probes are compared with the data obtained from the strain gages, and an excellent agreement is observed. A discrete time measurement where the system records data at different force levels is also shown. Practical issues regarding the placement of the sensors and accurate recording of data are discussed. The proposed sensing technology is demonstrated to be a good candidate for wireless structural health monitoring (SHM) of reinforced concrete members by its high sensitivity and wide dynamic range. PMID:27070615

  15. A Wireless Passive Sensing System for Displacement/Strain Measurement in Reinforced Concrete Members

    PubMed Central

    Ozbey, Burak; Erturk, Vakur B.; Demir, Hilmi Volkan; Altintas, Ayhan; Kurc, Ozgur

    2016-01-01

    In this study, we show a wireless passive sensing system embedded in a reinforced concrete member successfully being employed for the measurement of relative displacement and strain in a simply supported beam experiment. The system utilizes electromagnetic coupling between the transceiver antenna located outside the beam, and the sensing probes placed on the reinforcing bar (rebar) surface inside the beam. The probes were designed in the form of a nested split-ring resonator, a metamaterial-based structure chosen for its compact size and high sensitivity/resolution, which is at µm/microstrains level. Experiments were performed in both the elastic and plastic deformation cases of steel rebars, and the sensing system was demonstrated to acquire telemetric data in both cases. The wireless measurement results from multiple probes are compared with the data obtained from the strain gages, and an excellent agreement is observed. A discrete time measurement where the system records data at different force levels is also shown. Practical issues regarding the placement of the sensors and accurate recording of data are discussed. The proposed sensing technology is demonstrated to be a good candidate for wireless structural health monitoring (SHM) of reinforced concrete members by its high sensitivity and wide dynamic range. PMID:27070615

  16. Damage Evaluation in Shear-Critical Reinforced Concrete Beam using Piezoelectric Transducers as Smart Aggregates

    NASA Astrophysics Data System (ADS)

    Chalioris, Constantin E.; Papadopoulos, Nikos A.; Angeli, Georgia M.; Karayannis, Chris G.; Liolios, Asterios A.; Providakis, Costas P.

    2015-10-01

    Damage detection at early cracking stages in shear-critical reinforced concrete beams, before further deterioration and their inevitable brittle shear failure is crucial for structural safety and integrity. The effectiveness of a structural health monitoring technique using the admittance measurements of piezoelectric transducers mounted on a reinforced concrete beam without shear reinforcement is experimentally investigated. Embedded "smart aggregate" transducers and externally bonded piezoelectric patches have been placed in arrays at both shear spans of the beam. Beam were tested till total shear failure and monitored at three different states; healthy, flexural cracking and diagonal cracking. Test results showed that transducers close to the critical diagonal crack provided sound and graduated discrepancies between the admittance responses at the healthy state and thedamage levels.Damage assessment using statistical indices calculated from the measurements of all transducers was also attempted. Rational changes of the index values were obtained with respect to the increase of the damage. Admittance responses and index values of the transducers located on the shear span where the critical diagonal crack formed provided cogent evidence of damage. On the contrary, negligible indication of damage was yielded by the responses of the transducers located on the other shear span, where no diagonal cracking occurred.

  17. Thermal-sprayed zinc anodes for cathodic protection of steel-reinforced concrete bridges

    SciTech Connect

    Bullard, Sophie J.; Covino, Bernard S., Jr.; Cramer, Stephen D.; McGill, Galen E.

    1996-01-01

    Thermal-sprayed zinc anodes are being used in Oregon in impressed current cathodic protection (ICCP) systems for reinforced concrete bridges. The U.S. Department of Energy, Albany Research Center, is collaborating with the Oregon Department of Transportation (ODOT) to evaluate the long-term performance and service life of these anodes. Laboratory studies were conducted on concrete slabs coated with 0.5 mm (20 mil) thick, thermal-sprayed zinc anodes. The slabs were electrochemically aged at an accelerated rate using an anode current density of 0.032 A/m2 (3mA/ft2). Half the slabs were preheated before thermal-spraying with zinc; the other half were unheated. Electrochemical aging resulted in the formation at the zinc-concrete interface of a thin, low pH zone (relative to cement paste) consisting primarily of ZnO and Zn(OH)2, and in a second zone of calcium and zinc aluminates and silicates formed by secondary mineralization. Both zones contained elevated concentrations of sulfate and chloride ions. The original bond strength of the zinc coating decreased due to the loss of mechanical bond to the concrete with the initial passage of electrical charge (aging). Additional charge led to an increase in bond strength to a maximum as the result of secondary mineralization of zinc dissolution products with the cement paste. Further charge led to a decrease in bond strength and ultimately coating disbondment as the interfacial reaction zones continued to thicken. This occurred at an effective service life of 27 years at the 0.0022 A/m2 (0.2 mA/ft2) current density typically used by ODOT in ICCP systems for coastal bridges. Zinc coating failure under tensile stress was primarily cohesive within the thickening reaction zones at the zinc-concrete interface. There was no difference between the bond strength of zinc coatings on preheated and unheated concrete surfaces after long service times.

  18. Quantitative estimation of carbonation and chloride penetration in reinforced concrete by laser-induced breakdown spectroscopy

    NASA Astrophysics Data System (ADS)

    Eto, Shuzo; Matsuo, Toyofumi; Matsumura, Takuro; Fujii, Takashi; Tanaka, Masayoshi Y.

    2014-11-01

    The penetration profile of chlorine in a reinforced concrete (RC) specimen was determined by laser-induced breakdown spectroscopy (LIBS). The concrete core was prepared from RC beams with cracking damage induced by bending load and salt water spraying. LIBS was performed using a specimen that was obtained by splitting the concrete core, and the line scan of laser pulses gave the two-dimensional emission intensity profiles of 100 × 80 mm2 within one hour. The two-dimensional profile of the emission intensity suggests that the presence of the crack had less effect on the emission intensity when the measurement interval was larger than the crack width. The chlorine emission spectrum was measured without using the buffer gas, which is usually used for chlorine measurement, by collinear double-pulse LIBS. The apparent diffusion coefficient, which is one of the most important parameters for chloride penetration in concrete, was estimated using the depth profile of chlorine emission intensity and Fick's law. The carbonation depth was estimated on the basis of the relationship between carbon and calcium emission intensities. When the carbon emission intensity was statistically higher than the calcium emission intensity at the measurement point, we determined that the point was carbonated. The estimation results were consistent with the spraying test results using phenolphthalein solution. These results suggest that the quantitative estimation by LIBS of carbonation depth and chloride penetration can be performed simultaneously.

  19. Modelling of steel fiber-reinforced concrete under multi-axial loads

    SciTech Connect

    Swaddiwudhipong, Somsak . E-mail: cvesomsa@nus.edu.sg; Seow, Puay Eng Constance

    2006-07-15

    Fifty-four plain concrete and steel fiber-reinforced concrete (SFRC) plate specimens containing 0.5%, 1.0% and 1.5% of hooked fibers were tested under biaxial compression. The experimental results obtained were used to verify a failure surface developed earlier by the authors for SFRC under multi-axial loads. An equation has also been proposed in this study to predict the strain at failure for SFRC under multi-axial loads, {epsilon} {sub ci}. The proposed failure criterion and equation to predict {epsilon} {sub ci} were incorporated into a constitutive model in a well-established finite-element software, ABAQUS. Experiments of SFRC plate specimens under multi-axial loads and beams under two-point load were modeled to illustrate the application of the failure surface to SFRC under varying load conditions. Good agreement between analytical and experimental results is observed.

  20. Assessment of Reinforced Concrete Surface Breaking Crack Using Rayleigh Wave Measurement.

    PubMed

    Lee, Foo Wei; Chai, Hwa Kian; Lim, Kok Sing

    2016-03-05

    An improved single sided Rayleigh wave (R-wave) measurement was suggested to characterize surface breaking crack in steel reinforced concrete structures. Numerical simulations were performed to clarify the behavior of R-waves interacting with surface breaking crack with different depths and degrees of inclinations. Through analysis of simulation results, correlations between R-wave parameters of interest and crack characteristics (depth and degree of inclination) were obtained, which were then validated by experimental measurement of concrete specimens instigated with vertical and inclined artificial cracks of different depths. Wave parameters including velocity and amplitude attenuation for each case were studied. The correlations allowed us to estimate the depth and inclination of cracks measured experimentally with acceptable discrepancies, particularly for cracks which are relatively shallow and when the crack depth is smaller than the wavelength.

  1. Study of chloride ion migration in reinforced concrete under cathodic protection. Final report

    SciTech Connect

    Orlova, N.V.; Westall, J.C.; Rehani, M.; Koretsky, M.D.

    1999-09-01

    The migration of chloride ions in concrete with steel reinforcement was investigated. Mortar blocks (15 cm x 15 cm x 17 cm) of various composition (water to cement ratio, chloride ion content) were cast with an iron mesh cathode imbedded along one face and a thermally sprayed zinc anode applied to the opposite face. Current densities of 0.033 and 0.066 A (sq m) were applied to the blocks over a period of one year at constant temperature and humidity. The zinc face was covered with a pond of saturated calcium hydroxide to prevent polarization of the zinc-concrete interface. Over the course of polarization, potential vs. time curves were recorded and samples of mortar were extracted for determination of chloride concentration.

  2. Degradation processes of reinforced concretes by combined sulfate–phosphate attack

    SciTech Connect

    Secco, Michele; Lampronti, Giulio Isacco; Schlegel, Moritz-Caspar; Maritan, Lara; Zorzi, Federico

    2015-02-15

    A novel form of alteration due to the interaction between hydrated cement phases and sulfate and phosphate-based pollutants is described, through the characterization of concrete samples from an industrial reinforced concrete building. Decalcification of the cement matrices was observed, with secondary sulfate and phosphate-based mineral formation, according to a marked mineralogical and textural zoning. Five alteration layers may be detected: the two outermost layers are characterized by the presence of gypsum–brushite solid solution phases associated with anhydrous calcium sulfates and phosphates, respectively, while a progressive increase in apatite and ammonium magnesium phosphates is observable in the three innermost layers, associated with specific apatite precursors (brushite, octacalcium phosphate and amorphous calcium phosphate, respectively). The heterogeneous microstructural development of secondary phases is related to the chemical, pH and thermal gradients in the attacked cementitious systems, caused by different sources of pollutants and the exposure to the sun's radiation.

  3. Assessment of Reinforced Concrete Surface Breaking Crack Using Rayleigh Wave Measurement

    PubMed Central

    Lee, Foo Wei; Chai, Hwa Kian; Lim, Kok Sing

    2016-01-01

    An improved single sided Rayleigh wave (R-wave) measurement was suggested to characterize surface breaking crack in steel reinforced concrete structures. Numerical simulations were performed to clarify the behavior of R-waves interacting with surface breaking crack with different depths and degrees of inclinations. Through analysis of simulation results, correlations between R-wave parameters of interest and crack characteristics (depth and degree of inclination) were obtained, which were then validated by experimental measurement of concrete specimens instigated with vertical and inclined artificial cracks of different depths. Wave parameters including velocity and amplitude attenuation for each case were studied. The correlations allowed us to estimate the depth and inclination of cracks measured experimentally with acceptable discrepancies, particularly for cracks which are relatively shallow and when the crack depth is smaller than the wavelength. PMID:26959028

  4. Impedance spectroscopy of concrete cover on bridge decks with reinforcing steel

    NASA Astrophysics Data System (ADS)

    Bartholomew, Paul; Blankenagel, Bryan; Guthrie, Spencer; Mazzeo, Brian

    2011-10-01

    Chloride-induced corrosion of reinforcing steel is a major problem for aging bridge structures near marine environments or in cold regions where deicing salts are applied as part of winter maintenance. Corrosion is the result of the interaction of diffused chloride ions with the embedded steel. One property of affected decks that facilitates detection of chloride ions is their ability to conduct electricity. Impedance spectroscopy can be used to measure concrete conductivity and thereby identify areas of increased chloride concentration characterized by elevated risks of corrosion. A new probe and measurement apparatus has been engineered to measure large areas of concrete on bridge decks. Comparison between measurements obtained in the laboratory and in the field will be presented.

  5. Experimental and analytical behavior of strengthened reinforced concrete columns with steel angles and strips

    NASA Astrophysics Data System (ADS)

    Khalifa, Essam S.; Al-Tersawy, Sherif H.

    2014-06-01

    The need of strengthening reinforced concrete columns, due to loss of strength and/or stiffness, is an essential requirement due to variation of the loads and environmental conditions applied on these columns. Steel jackets around the reinforced concrete (RC) columns are usually made by means of steel plates covering all over the column surface area. For the value of engineering purposes, another technique was developed using steel angles at the corners of the RC columns connected with discrete steel strips. In this paper, an experimental program is designed to evaluate the improvement in load-carrying capacity, stiffness and ductility of strengthened RC columns, concomitant with steel angles and strips. Despite of prevailing a substantially increased loading capacity and strength a pronounced enhancement in ductility and stiffness has been reported. A need for experimental test results with low value of concrete strength to mimic the local old-age structures condition that required strengthening in local countries. Seven columns specimens are tested to evaluate the strength improvement provided by steel strengthening of columns. The method of strengthened steel angles with strips is compared with another strengthening technique. This technique includes connected and unconnected steel-casing specimens. The observed experimental results describe load-shortening curves, horizontal strains in stirrups and steel strips, as well as description of failure mode. The extra-confinement pressure, due to existence of steel cage, of the strengthened RC column can be also observed from experimental results. The code provisions that predict the load-carrying capacity of the strengthened RC composite column has a discrepancy in the results. For this reason, an analytical model is developed in this paper to compare the code limit with experimental observed results. The proposed model accounts for the composite action for concrete confinement and enhancement of the local buckling

  6. Uncertainties Concerning the Free Vibration of Inhomogeneous Orthotropic Reinforced Concrete Plates

    NASA Astrophysics Data System (ADS)

    Shahsavar, Vahid Lal; Tofighi, Samira

    2014-09-01

    Analyzing nearly collapsed and broken structures gives good insights into possible architectural and engineering design mistakes and faults in the detailing and mismanagement of a construction by building contractors. Harmful vibration effects of construction operations occur frequently. The background reviews have demonstrated that the problem of the vibration serviceability of long-span concrete floors in buildings is complex and interdisciplinary in nature. In public buildings, floor vibration control is required in order to meet Serviceability Limit States that ensure the comfort of the users of a building. In industrial buildings, machines are often placed on floors. Machines generate vibrations of various frequencies, which are transferred to supporting constructions. Precision machines require a stable floor with defined and known dynamic characteristics. In recent years there has been increasing interest in the motion of elastic bodies whose material properties (density, elastic moduli, etc.) are not constant, but vary with their position, perhaps in a random manner. Concrete is a non-homogeneous and anisotropic material. Modeling the mechanical behavior of reinforced concrete (RC) is still one of the most difficult challenges in the field of structural engineering. One of several methods for determining the dynamic modulus of the elasticity of engineering materials is the vibration frequency procedure. In this method, the required variables except for the modulus of elasticity are accurately and certainly determined. In this research, the uncertainly analysis of the free vibration of inhomogeneous orthotropic reinforced concrete plates has been investigated. Due to the numerous outputs obtained, the software package has been written in Matlab, and an analysis of the data and drawing related charts has been done.

  7. Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures Part II. Practical applications

    SciTech Connect

    Saetta, Anna V.; Vitaliani, Renato V

    2005-05-01

    The mathematical-numerical method developed by the authors to predict the corrosion initiation time of reinforced concrete structures due to carbonation process, recalled in Part I of this work, is here applied to some real cases. The final aim is to develop and test a practical method for determining the durability characteristics of existing buildings liable to carbonation, as well as estimating the corrosion initiation time of a building at the design stage. Two industrial sheds with different ages and located in different areas have been analyzed performing both experimental tests and numerical analyses. Finally, a case of carbonation-induced failure in a prestressed r.c. beam is presented.

  8. Static and dynamic pile testing of reinforced concrete piles with structure integrated fibre optic strain sensors

    NASA Astrophysics Data System (ADS)

    Schilder, Constanze; Kohlhoff, Harald; Hofmann, Detlef; Basedau, Frank; Habel, Wolfgang R.; Baeßler, Matthias; Niederleithinger, Ernst; Georgi, Steven; Herten, Markus

    2013-05-01

    Static and dynamic pile tests are carried out to determine the load bearing capacity and the quality of reinforced concrete piles. As part of a round robin test to evaluate dynamic load tests, structure integrated fibre optic strain sensors were used to receive more detailed information about the strains along the pile length compared to conventional measurements at the pile head. This paper shows the instrumentation of the pile with extrinsic Fabry-Perot interferometers sensors and fibre Bragg gratings sensors together with the results of the conducted static load test as well as the dynamic load tests and pile integrity tests.

  9. 1. U.S. Route 250 grade separation structure. This reinforced concrete, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. U.S. Route 250 grade separation structure. This reinforced concrete, rigid frame structure was built in 1941. Its relatively flat arch provided maximum useful clearance in a short span and the physics of the design eliminated the need for extensive abutments to contain the thrust of traditional arches, making it ideally suited as a grade separation structure. BLRI designers made extensive use of theses bridges for crossing small streams and creeks, and grade separation structures, ornamenting them with a rustic stone facade. View is of the south-southeast elevation. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  10. Experimental Studies on Behaviour of Reinforced Geopolymer Concrete Beams Subjected to Monotonic Static Loading

    NASA Astrophysics Data System (ADS)

    Madheswaran, C. K.; Ambily, P. S.; Dattatreya, J. K.; Ramesh, G.

    2015-06-01

    This work describes the experimental investigation on behaviour of reinforced GPC beams subjected to monotonic static loading. The overall dimensions of the GPC beams are 250 mm × 300 mm × 2200 mm. The effective span of beam is 1600 mm. The beams have been designed to be critical in shear as per IS:456 provisions. The specimens were produced from a mix incorporating fly ash and ground granulated blast furnace slag, which was designed for a compressive strength of 40 MPa at 28 days. The reinforced concrete specimens are subjected to curing at ambient temperature under wet burlap. The parameters being investigated include shear span to depth ratio (a/d = 1.5 and 2.0). Experiments are conducted on 12 GPC beams and four OPCC control beams. All the beams are tested using 2000 kN servo-controlled hydraulic actuator. This paper presents the results of experimental studies.

  11. Experimental studies on behavior of fully grouted reinforced-concrete masonry shear walls

    NASA Astrophysics Data System (ADS)

    Zhao, Yan; Wang, Fenglai

    2015-12-01

    An experimental study is conducted on fully grouted reinforced masonry shear walls (RMSWs) made from concrete blocks with a new configuration. Ten RMSWs are tested under reversed cyclic lateral load to investigate the influence of different reinforcements and applied axial stress values on their seismic behavior. The results show that flexural strength increases with the applied axial stress, and shear strength dominated by diagonal cracking increases with both the amount of horizontal reinforcement and applied axial stress. Yield displacement, ductility, and energy dissipation capability can be improved substantially by increasing the amount of horizontal reinforcement. The critical parameters for the walls are derived from the experiment: displacement ductility values corresponding to 15% strength degradation of the walls reach up to 2.6 and 4.5 in the shear and flexure failure modes, respectively; stiffness values of flexure- and shear-dominated walls rapidly degrade to 17%-19% and 48%-57% of initial stiffness at 0.50 D max (displacement at peak load). The experiment suggests that RMSWs could be assigned a higher damping ratio (˜14%) for collapse prevention design and a lower damping value (˜7%) for a fully operational limit state or serviceability limit state.

  12. Structural health monitoring of a reinforced concrete building during the severe typhoon Vicente in 2012.

    PubMed

    Kuok, Sin-Chi; Yuen, Ka-Veng

    2013-01-01

    The goal of this study is to investigate the structural performance of reinforced concrete building under the influence of severe typhoon. For this purpose, full-scale monitoring of a 22-story reinforced concrete building was conducted during the entire passage process of a severe typhoon "Vicente." Vicente was the eighth tropical storm developed in the Western North Pacific Ocean and the South China Sea in 2012. Moreover, it was the strongest and most devastating typhoon that struck Macao since 1999. The overall duration of the typhoon affected period that lasted more than 70 hours and the typhoon eye region covered Macao for around one hour. The wind and structural response measurements were acquired throughout the entire typhoon affected period. The wind characteristics were analyzed using the measured wind data including the wind speed and wind direction time histories. Besides, the structural response measurements of the monitored building were utilized for modal identification using the Bayesian spectral density approach. Detailed analysis of the field data and the typhoon generated effects on the structural performance are discussed.

  13. Crack detection of a full-scale reinforced concrete girder with a distributed cable sensor

    NASA Astrophysics Data System (ADS)

    Chen, G. D.; Sun, S. S.; Pommerenke, D.; Drewniak, J. L.; Greene, G. G.; McDaniel, R. D.; Belarbi, A.; Mu, H. M.

    2005-06-01

    A new concept of designing cable sensors for health monitoring of large-scale civil infrastructure has recently been proposed by the present authors. The concept was developed based on the change in topology of the outer conductor of a coaxial cable sensor. One such sensor was fabricated with its outer conductor tightly wrapped with a commercial tin-plated steel spiral that was covered with solder. It was mounted near the surface of a 15 m long reinforced concrete (RC) girder with a 762 mm square hollow cross section and 152 mm thick walls. The girder was tested under a progressively increasing cyclic torsion creating 45° inclined cracks around and along the girder. The main objectives of this study were to implement the distributed cable sensor technology in large-scale reinforced concrete structures, to understand the performance of a sensor under cyclic loading for detecting and locating cracks, and, finally, to address implementation issues such as signal loss, non-uniformity in sensor construction, and recoverability.

  14. Performance of Zinc Anodes for Cathodic Protection of Reinforced Concrete Bridges

    SciTech Connect

    Covino, Bernard S. Jr.; Cramer, Stephen D.; Bullard, Sophie J.; Holcomb, Gordon R.; Russell, James H.; Collins, W. Keith; Laylor, Martin H.; Cryer, Curtis B.

    2002-03-01

    Operation of thermal spray zinc (Zn) anodes for cathodic protection (CP) of reinforced concrete structures was investigated in laboratory and field studies conducted by the Albany Research Center (ARC) in collaboration with the Oregon Department of Transportation. The purposes of the research presented in this report were: evaluate the need for preheating concrete to improve the adhesion of the anode; estimate the service life of thermal spray Zn CP anodes; determine the optimum thickness for Zn CP anodes; characterize the anode-concrete interfacial chemistry; and correlate field and laboratory results. Laboratory studies involved accelerated electrochemical aging of thermal sprayed Zn anodes on concrete slabs, some of which were periodically wetted while others were unwetted. Concrete used in the slabs contained either 1.2 or 3 kg NaCl /m3 (2 or 5 lbs NaCl /yd3) as part of the concrete mix design. The Zn anodes were applied to the slabs using the twin wire arc-spray technique. Half of the slabs were preheated to 120-160 C (250-320 F) to improve the initial Zn anode bond strength and the other half were not. Accelerated aging was done at a current density of 0.032 A/m2 (3 mA/ft2), 15 times that used on Oregon DOT Coastal bridges, i.e, . 0.0022 A/m2 (0.2 mA/ft2) Cores from the Cape Creek Bridge (OR), the Richmond San Rafael Bridge (CA), and the East Camino Underpass (CA) were used to study the anode-concrete interfacial chemistry, to relate the chemistry to electrochemical age at the time of sampling, and to compare the chemistry of the field anodes to the chemistry of anodes from the laboratory studies. Cores from a CALTRANS study of a silane sealant used prior to the application of the Zn anodes and cores with galvanized rebar from the Longbird Bridge (Bermuda) were also studied. Aged laboratory and field anodes were characterized by measuring some or all of the following parameters: thickness, bond strength, anode-concrete interfacial chemistry, bulk chemistry

  15. Novel hybrid columns made of ultra-high performance concrete and fiber reinforced polymers

    NASA Astrophysics Data System (ADS)

    Zohrevand, Pedram

    The application of advanced materials in infrastructure has grown rapidly in recent years mainly because of their potential to ease the construction, extend the service life, and improve the performance of structures. Ultra-high performance concrete (UHPC) is one such material considered as a novel alternative to conventional concrete. The material microstructure in UHPC is optimized to significantly improve its material properties including compressive and tensile strength, modulus of elasticity, durability, and damage tolerance. Fiber-reinforced polymer (FRP) composite is another novel construction material with excellent properties such as high strength-to-weight and stiffness-to-weight ratios and good corrosion resistance. Considering the exceptional properties of UHPC and FRP, many advantages can result from the combined application of these two advanced materials, which is the subject of this research. The confinement behavior of UHPC was studied for the first time in this research. The stress-strain behavior of a series of UHPC-filled fiber-reinforced polymer (FRP) tubes with different fiber types and thicknesses were tested under uniaxial compression. The FRP confinement was shown to significantly enhance both the ultimate strength and strain of UHPC. It was also shown that existing confinement models are incapable of predicting the behavior of FRP-confined UHPC. Therefore, new stress-strain models for FRP-confined UHPC were developed through an analytical study. In the other part of this research, a novel steel-free UHPC-filled FRP tube (UHPCFFT) column system was developed and its cyclic behavior was studied. The proposed steel-free UHPCFFT column showed much higher strength and stiffness, with a reasonable ductility, as compared to its conventional reinforced concrete (RC) counterpart. Using the results of the first phase of column tests, a second series of UHPCFFT columns were made and studied under pseudo-static loading to study the effect of column

  16. Distributed fiber optic sensors for monitoring reinforced concrete piles using Brillouin scattering

    NASA Astrophysics Data System (ADS)

    de Battista, N.; Kechavarzi, C.; Soga, K.

    2016-05-01

    In this paper we report on advances made in the installation and use of distributed fiber optic sensors to monitor reinforced concrete piles subjected to static load tests. Eight concrete test piles, at three construction sites in London, have recently been instrumented with embedded DFOS. The Brillouin optical time domain reflectometry (BOTDR) technique was used to measure the changes in internal strain and temperature of the piles, during concrete curing and during load testing. These data were used to assess the quality of the pile and derive the load capacity parameters to be used in the foundation design of tall buildings which are to be erected on these sites. The measurements obtained from the DFOS system agreed well with the measurements taken simultaneously using conventional point sensors embedded in the piles. Whereas the conventional sensors only provided measurements at a small number of locations within the piles, the DFOS system made it possible to record the complete strain / temperature profiles along the length of the piles.

  17. Comparison of UPE and GPR systems for the survey of reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Derobert, Xavier; Villain, Géraldine; Joubert, Anaelle

    2014-05-01

    The objective of this study is to compare two non-destructive techniques using sonic and radar pulses for the survey of reinforced concre structures. The first studied testing method is a Ultrasonic (US) Pulse-Echo (model M2502, from Acoustic Control Systems manufacturer) composed of an array of 12 S-wave transmitters and 12 receivers in one bloc. Their central frequency is equal to 55 kHz. As the averaged USvelocities in concrete tend to 1800-3000 m/s, the corresponding wavelengths tend to 3-5 cm. The Ground-penetrating radar (GPR) system has been performed with high frequency antennas above 1 GHz (1.5 and 2.6 GHz antennas), which lead to the same range of EM wavelengths than the US ones. Measurements have been performed on some thick reinforced concrete elements of structures, and then are compared in term of resolution, depth penetration and ease to use. One of the studied elements is a concrete beam (dimensions : 16 m long, 0.5 m width and 1 m high) designed in an European Projet (FP7_ISTIMES) and damaged by controled impacts of blocks of several tons dropped from few meters [1]. Therefore, the objective of this studyis to compare the two techniques, and for the last studied element to detect the major cracks and the spallings of the cover concrete which are visible from the opposite side. References: Malhotra V.M., Carino, N.J., CRC Handbook on Nondestructive Testing of Concrete, CRC Press LLC, , 1991, 343p. Taffe A., Wiggenhauser H., Validation for Thickness Measurement in Civil Engineering with Ultrasonic Echo, International Symposium NDT-CE, Saint-Louis, USA, 2006, pp506-512. Géraldine Villain, Anaëlle Luczak, Olivier Durand, Xavier Dérobert, Deepening of the measurement technique by Ultrasonic Pulse Echo UPE, Report, IFSTTAR, January 2011, 22p. Catapano I., Di Napoli R., Soldovieri F., Bavusi M., Loperte A., Dumoulin J. (2012), « Structural monitoring via microwave tomography-enhanced GPR : the Montagnole test site », J. Geophys. Eng., Vol. 9, pp. 100-107.

  18. History of the Development of Liquid-Applied Coatings for Protection of Reinforced Concrete

    NASA Technical Reports Server (NTRS)

    Curran, Joseph J.; Hansen, marlin H.

    2005-01-01

    Corrosion of reinforcing steel in concrete is an insidious problem for structures at Kennedy Space Center (KSC). KSC is located on the coast of Florida in a highly corrosive atmosphere. Launch pads, highway bridge infrastructure, and buildings are strongly affected. To mitigate these problems, NASA initiated a development program for a Galvanic Liquid-Applied Coating System (GLACS). A breakthrough in this area would have great commercial value in transportation, marine and construction industry infrastructures. The patented NASA GLACS system has undergone considerable testing to meet the needs of commercialization. A moisture-cure coating gives excellent adhesion with ease of application compared to existing galvanic products on the market. The latest development, GalvaCori; can be sprayed or hand applied to almost any structure shape. A self-adhesive conductive tape system has been devised to simplify current collection within the coating areas. In testing programs, millivolt potential and milliamp output per square foot of anode have been closely studied at actual test sites. These two parameters are probably the most challenging items of a resin-based, room-temperature-applied, galvanic coating. Extensive re-formulation has resulted in a system that provides the needed polarization for catholic protection of reinforcing steel in concrete in a variety of structure environments. The rate of corrosion of rebar in concrete is greatly affected by the environment of the structure. In addition to this, for any given concrete structure; moisture level, carbonization, and chloride contamination influences the rate of rebar corrosion. Similarly, the cathodic protection level of galvanic systems is also dependent on the moisture level of the concrete. GalvaCorr is formulated to maintain galvanic activity as the moisture level of the structure declines. GalvaCorr is available as a three-part kit. The mixing step requires about ten minutes. The viscosity can be easily

  19. Validation of mechanical models for reinforced concrete structures: Presentation of the French project ``Benchmark des Poutres de la Rance''

    NASA Astrophysics Data System (ADS)

    L'Hostis, V.; Brunet, C.; Poupard, O.; Petre-Lazar, I.

    2006-11-01

    Several ageing models are available for the prediction of the mechanical consequences of rebar corrosion. They are used for service life prediction of reinforced concrete structures. Concerning corrosion diagnosis of reinforced concrete, some Non Destructive Testing (NDT) tools have been developed, and have been in use for some years. However, these developments require validation on existing concrete structures. The French project “Benchmark des Poutres de la Rance” contributes to this aspect. It has two main objectives: (i) validation of mechanical models to estimate the influence of rebar corrosion on the load bearing capacity of a structure, (ii) qualification of the use of the NDT results to collect information on steel corrosion within reinforced-concrete structures. Ten French and European institutions from both academic research laboratories and industrial companies contributed during the years 2004 and 2005. This paper presents the project that was divided into several work packages: (i) the reinforced concrete beams were characterized from non-destructive testing tools, (ii) the mechanical behaviour of the beams was experimentally tested, (iii) complementary laboratory analysis were performed and (iv) finally numerical simulations results were compared to the experimental results obtained with the mechanical tests.

  20. Brillouin Corrosion Expansion Sensors for Steel Reinforced Concrete Structures Using a Fiber Optic Coil Winding Method

    PubMed Central

    Zhao, Xuefeng; Gong, Peng; Qiao, Guofu; Lu, Jie; Lv, Xingjun; Ou, Jinping

    2011-01-01

    In this paper, a novel kind of method to monitor corrosion expansion of steel rebars in steel reinforced concrete structures named fiber optic coil winding method is proposed, discussed and tested. It is based on the fiber optical Brillouin sensing technique. Firstly, a strain calibration experiment is designed and conducted to obtain the strain coefficient of single mode fiber optics. Results have shown that there is a good linear relationship between Brillouin frequency and applied strain. Then, three kinds of novel fiber optical Brillouin corrosion expansion sensors with different fiber optic coil winding packaging schemes are designed. Sensors were embedded into concrete specimens to monitor expansion strain caused by steel rebar corrosion, and their performance was studied in a designed electrochemical corrosion acceleration experiment. Experimental results have shown that expansion strain along the fiber optic coil winding area can be detected and measured by the three kinds of sensors with different measurement range during development the corrosion. With the assumption of uniform corrosion, diameters of corrosion steel rebars were obtained using calculated average strains. A maximum expansion strain of 6,738 με was monitored. Furthermore, the uniform corrosion analysis model was established and the evaluation formula to evaluate mass loss rate of steel rebar under a given corrosion rust expansion rate was derived. The research has shown that three kinds of Brillouin sensors can be used to monitor the steel rebar corrosion expansion of reinforced concrete structures with good sensitivity, accuracy and monitoring range, and can be applied to monitor different levels of corrosion. By means of this kind of monitoring technique, quantitative corrosion expansion monitoring can be carried out, with the virtues of long durability, real-time monitoring and quasi-distribution monitoring. PMID:22346672

  1. Non-destructive inspection protocol for reinforced concrete barriers and bridge railings

    NASA Astrophysics Data System (ADS)

    Chintakunta, Satish R.; Boone, Shane D.

    2014-02-01

    Reinforced concrete highway barriers and bridge railings serve to prevent errant vehicles from departing the travel way at grade separations. Despite the important role that they play in maintaining safety and their ubiquitous nature, barrier inspection rarely moves beyond visual inspection. In August 2008, a tractor-trailer fatally departed William Preston Lane, Jr. Memorial Bridge after it dislodged a section of the bridge barrier. Investigations following the accident identified significant corrosion of the anchor bolts attaching the bridge railing to the bridge deck. As a result of the information gathered during its investigation of the accident, the National Transportation Safety Board (NTSB) made recommendations to the Federal Highway Administration concerning Non-Destructive Evaluation (NDE) of concrete bridge railings. The Center for nondestructive evaluation (NDE) at Turner Fairbank Highway Research Center in McLean, VA is currently evaluating feasibility of using four technologies - ground penetrating radar (GPR), ultrasonic pulse-echo, digital radiography and infrared thermal imaging methods to develop bridge inspection methods that augment visual inspections, offer reliable measurement techniques, and are practical, both in terms of time and cost, for field inspection work. Controlled samples containing predefined corrosion levels in reinforcing steel were embedded at barrier connection points for laboratory testing. All four NDE techniques were used in the initial phase I testing. An inspection protocol for detecting and measuring the corrosion of reinforced steel embedded in the anchorage system will be developed as part of phase II research. The identified technologies shall be further developed for field testing utilizing a structure with a barrier in good condition and a structure with a barrier in poor condition.

  2. Non-destructive inspection protocol for reinforced concrete barriers and bridge railings

    SciTech Connect

    Chintakunta, Satish R.; Boone, Shane D.

    2014-02-18

    Reinforced concrete highway barriers and bridge railings serve to prevent errant vehicles from departing the travel way at grade separations. Despite the important role that they play in maintaining safety and their ubiquitous nature, barrier inspection rarely moves beyond visual inspection. In August 2008, a tractor-trailer fatally departed William Preston Lane, Jr. Memorial Bridge after it dislodged a section of the bridge barrier. Investigations following the accident identified significant corrosion of the anchor bolts attaching the bridge railing to the bridge deck. As a result of the information gathered during its investigation of the accident, the National Transportation Safety Board (NTSB) made recommendations to the Federal Highway Administration concerning Non-Destructive Evaluation (NDE) of concrete bridge railings. The Center for nondestructive evaluation (NDE) at Turner Fairbank Highway Research Center in McLean, VA is currently evaluating feasibility of using four technologies - ground penetrating radar (GPR), ultrasonic pulse-echo, digital radiography and infrared thermal imaging methods to develop bridge inspection methods that augment visual inspections, offer reliable measurement techniques, and are practical, both in terms of time and cost, for field inspection work. Controlled samples containing predefined corrosion levels in reinforcing steel were embedded at barrier connection points for laboratory testing. All four NDE techniques were used in the initial phase I testing. An inspection protocol for detecting and measuring the corrosion of reinforced steel embedded in the anchorage system will be developed as part of phase II research. The identified technologies shall be further developed for field testing utilizing a structure with a barrier in good condition and a structure with a barrier in poor condition.

  3. Analysis of the Sandia one-sixth-scale reinforced concrete containment model: Interim report

    SciTech Connect

    Dameron, R.A.; Dunham, R.S.; Rashid, Y.R.; Sullaway, M.F.

    1989-03-01

    This report describes part of Phase 3 of the project ''Methods for Ultimate Load Analysis of Concrete Containments.'' As part of the overall objectives to develop a qualified analysis methodology for concrete containment structures, this phase of the research utilizes analytical techniques which have been developed and verified in Phases 1 and 2 to perform comprehensive detailed analyses of the Sandia 1:6 scale reinforced containment model. The EPRI-sponsored finite element code, ABAQUS-EPGEN, and the concrete constitutive model developed previously are the analysis tools used in this research. A comprehensive set of a pre-test predictions were developed in 1986 and 1987 including a series of 2D analyses to identify critical regions, and a number of 3D local analyses to characterize 3D response components. These predictions were compiled and reported to EPRI prior to the test but have remained unpublished until their inclusion in the current report. This material is included here as an Appendix; the predictions based on this work successfully predicted the leakage pressure and many of the liner tearing locations that occurred in the test. The main report compares the pretest calculations to the test results, and it describes several post-test analyses, including axisymmetric analyses to investigate basemat uplift behavior, and the effect of changing concrete tensile strength and a 3D local analysis that studies the behavior at the largest liner tear that occurred. Conclusions of the paper access the analytical methodology in light of the test results. 20 refs., 59 figs.

  4. Impact resistance performance of green construction material using light weight oil palm shells reinforced bamboo concrete slab

    NASA Astrophysics Data System (ADS)

    Muda, Z. C.; Usman, F.; Beddu, S.; Alam, M. A.; Thiruchelvam, S.; Sidek, L. M.; Basri, H.; Saadi, S.

    2013-06-01

    This paper investigate the performance of lightweight oil palm shells (OPS) concrete with varied bamboo reinforcement content for the concrete slab of 300mm x 300mm size reinforced with different thickness subjected to low impact projectile test. A self-fabricated drop-weight impact test rig with a steel ball weight of 1.2 kg drop at 1 m height has been used in this research work. The main variables for the study is to find the relationship of the impact resistance against the amount of bamboo reinforcement and slab thickness. A linear relationship has been established between first and ultimate crack resistance against bamboo diameters and slab thickness by the experiment. The linear relationship has also been established between the service (first) crack and ultimate crack resistance against the bamboo reinforcement diameter for a constant spacing for various slab thickness using 0.45 OPS and 0.6 OPS bamboo reinforced concrete. The increment in bamboo diameter has more effect on the first crack resistance than the ultimate crack resistance. The linear relationship has also been established between the service (first) crack and ultimate crack resistance against the various slab thickness. Increment in slab thickness of the slab has more effect on the crack resistance as compare to the increment in the diameter of the bamboo reinforcement.

  5. Corrosion initiation and propagation behavior of corrosion resistant concrete reinforcing materials

    NASA Astrophysics Data System (ADS)

    Hurley, Michael F.

    The life of a concrete structure exposed to deicing compounds or seawater is often limited by chloride induced corrosion of the steel reinforcement. In this study, the key material attributes that affect the corrosion initiation and propagation periods were studied. These included material composition, surface condition, ageing time, propagation behavior during active corrosion, morphology of attack, and type of corrosion products generated by each rebar material. The threshold chloride concentrations for solid 316LN stainless steel, 316L stainless steel clad over carbon steel, 2101 LDX, MMFX-2, and carbon steel rebar were investigated using electrochemical techniques in saturated calcium hydroxide solutions. Surface preparation, test method, duration of period exposed to a passivating condition prior to introduction of chloride, and presence of cladding defects all affected the threshold chloride concentration obtained. A model was implemented to predict the extension of time until corrosion initiation would be expected. 8 years was the predicted time to corrosion initiation for carbon steel. However, model results confirmed that use of 316LN may increase the time until onset of corrosion to 100 years or more. To assess the potential benefits afforded by new corrosion resistant rebar alloys from a corrosion resistance standpoint the corrosion propagation behavior and other factors that might affect the risk of corrosion-induced concrete cracking must also be considered. Radial pit growth was found to be ohmically controlled but repassivation occurred more readily at high potentials in the case of 316LN and 2101 stainless steels. The discovery of ohmically controlled propagation enabled transformation of propagation rates from simulated concrete pore solution to less conductive concrete by accounting for resistance changes in the surrounding medium. The corrosion propagation behavior as well as the morphology of attack directly affects the propensity for concrete

  6. Fundamental period of Italian reinforced concrete buildings: comparison between numerical, experimental and Italian code simplified values

    NASA Astrophysics Data System (ADS)

    Ditommaso, Rocco; Carlo Ponzo, Felice; Auletta, Gianluca; Iacovino, Chiara; Nigro, Antonella

    2015-04-01

    Aim of this study is a comparison among the fundamental period of reinforced concrete buildings evaluated using the simplified approach proposed by the Italian Seismic code (NTC 2008), numerical models and real values retrieved from an experimental campaign performed on several buildings located in Basilicata region (Italy). With the intention of proposing simplified relationships to evaluate the fundamental period of reinforced concrete buildings, scientists and engineers performed several numerical and experimental campaigns, on different structures all around the world, to calibrate different kind of formulas. Most of formulas retrieved from both numerical and experimental analyses provides vibration periods smaller than those suggested by the Italian seismic code. However, it is well known that the fundamental period of a structure play a key role in the correct evaluation of the spectral acceleration for seismic static analyses. Generally, simplified approaches impose the use of safety factors greater than those related to in depth nonlinear analyses with the aim to cover possible unexpected uncertainties. Using the simplified formula proposed by the Italian seismic code the fundamental period is quite higher than fundamental periods experimentally evaluated on real structures, with the consequence that the spectral acceleration adopted in the seismic static analysis may be significantly different than real spectral acceleration. This approach could produces a decreasing in safety factors obtained using linear and nonlinear seismic static analyses. Finally, the authors suggest a possible update of the Italian seismic code formula for the simplified estimation of the fundamental period of vibration of existing RC buildings, taking into account both elastic and inelastic structural behaviour and the interaction between structural and non-structural elements. Acknowledgements This study was partially funded by the Italian Civil Protection Department within the

  7. Capillary transport of water through textile-reinforced concrete applied in repairing and/or strengthening cracked RC structures

    SciTech Connect

    Lieboldt, M.; Mechtcherine, V.

    2013-10-15

    The use of textile-reinforced concrete (TRC) has great potential for innovative solutions in repairing, protecting, and strengthening concrete and RC structures. The article at hand reports on an investigation on composite concrete specimens made of cracked ordinary concrete as substrate and textile-reinforced concrete (TRC) as a cover layer for its strengthening and repair. The TRC cover layer was assessed with regard to its effectiveness as a protective layer against the ingress of water through capillary action. Since in real applications such TRC layers may be cracked or presumed to be so, thereby activating the load-carrying function of the textile reinforcement, the TRC layer was cracked for purposes of this study. The water transport in the cracked ordinary concrete specimens without the TRC layer was used as a reference. Gravimetric measurements and neutron radiography served as the testing techniques. In ordinary concrete quick and deep ingress of water through relatively wide macro-cracks of approximately 100 μm width, followed by transport through the capillary pore system, caused saturation of large areas in a rather short time. TRC applied to the RC surface reduced the ingress of water to a large extent. Its small crack widths of 15 to 20 μm changed suction behaviour fundamentally. In the cracked substrate of ordinary concrete, capillary suction was prevented, and transport through the pore system of the matrix became the prevailing transport mechanism of capillary action. Not only was the mechanism altered, but the transport of water deep into inner regions was markedly retarded as well.

  8. Effects of shear stirrup details on ultimate capacity and tensile-membrane behavior of reinforced concrete slabs. Final report

    SciTech Connect

    Woodson, S.C.

    1985-08-01

    At the time this study was initiated, civil defense planning in the United States called for the evacuation of nonessential personnel to safe host areas when a nuclear attack is probable, requiring the construction of blasts shelters to protect the keyworkers remaining in the risk areas. The placement of shear stirrups in the one-way reinforced concrete roof slabs of the shelters will contribute significantly to project costs. Ten one-way reinforced concrete slabs were statically and uniformly loaded with water pressure, primarily to investigate the effect of stirrups and stirrup details on the load-response behavior of the slabs. The slabs had clear spans of 24.0 inches, span to effective depth ratios of 12.4, tensile reinforcement of 0.75%, and concrete strengths of approximately 5,000 psi. The test series significantly increased the data base for uniformly loaded one-way slabs. Support rotations between 13.1 and 20.6 degrees were observed. A more ductile behavior was observed in slabs with construction details, implying better concrete confinement due to more confining steel (i.e., closely spaced stirrups, double-leg stirrups, and closely spaced principal reinforcing bars). The parameters investigated did not appear to have a significant effect on ultimate load capacity.

  9. 75 FR 22552 - Certain Steel Concrete Reinforcing Bars from Turkey; Notice of Amended Final Results Pursuant to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-29

    ... Administrative Review, 74 FR 65515 (Dec. 10, 2009) and Certain Steel Concrete Reinforcing Bars from Turkey: Notice of Court Decision Not in Harmony with Final Results of Administrative Review, 75 FR 7562 (Feb. 22... in Part, 70 FR 67665 (Nov. 8, 2005) (Final Results). In the Final Results the Department followed...

  10. 75 FR 47260 - Certain Steel Concrete Reinforcing Bars from Turkey: Notice of Amended Final Results Pursuant to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... Antidumping Duty Administrative Review and New Shipper Review and Determination To Revoke in Part, 72 FR 62630... from Turkey: Notice of Court Decision Not in Harmony with Final Results of Administrative Review, 74 FR... International Trade Administration (A-489-807) Certain Steel Concrete Reinforcing Bars from Turkey: Notice...

  11. Preliminary evaluation of LTPP continuously reinforced concrete (CRC) pavement test sections. Final report, February 1995--October 1998

    SciTech Connect

    Tayabji, S.D.; Selezneva, O.; Jiang, Y.J.

    1999-07-01

    As part of the study reported here, analysis of data from the LTPP GPS-5 test sections was conducted to identify factors that influence long-term crack spacing in continuously reinforced concrete (CRC) pavements and to determine that effect of crack spacing on pavement performance. Data from the 85 test sections from the GPS-5 experiment were analyzed.

  12. Non-linear finite element-based material constitutive law for zero slump steel fiber reinforced concrete pipe structures

    NASA Astrophysics Data System (ADS)

    Mikhaylova, Alena

    This study presents a comprehensive investigation of performance and behavior of steel-fiber reinforced concrete pipes (SFRCP). The main goal of this study is to develop the material constitutive model for steel fiber reinforced concrete used in dry-cast application. To accomplish this goal a range of pipe sizes varying from 15 in. (400 mm) to 48 in. (1200 mm) in diameter and fiber content of 0.17%, 0.25%, 0.33%, 0.5%, 0.67% and 83% by volume were produced. The pipes were tested in three-edge bearing condition to obtain the load-deformation response and overall performance of the pipe. The pipes were also subjected to hydrostatic joint and joint shear tests to evaluate the performance of the fiber-pipe joints for water tightness and under differential displacements, respectively. In addition, testing on hardened concrete was performed to obtain the basic mechanical material properties. High variation in the test results for material testing was identified as a part of experimental investigation. A three-dimensional non-linear finite element model of the pipe under the three edge bearing condition was developed to identify the constitutive material relations of fiber-concrete composite. A constitutive model of concrete implementing the concrete plasticity and continuum fracture mechanics was considered for defining the complex non-linear behavior of fiber-concrete. Three main concrete damage algorithms were examined: concrete brittle cracking, concrete damaged plasticity with adaptive meshing technique and concrete damaged plasticity with visco-plastic regularization. The latter was identified as the most robust and efficient to model the post-cracking behavior of fiber reinforced concrete and was used in the subsequent studies. The tension stiffening material constitutive law for composite concrete was determined by converging the FEM solution of load-deformation response with the results of experimental testing. This was achieved by iteratively modifying the non

  13. Pounding Effects on the Earthquake Response of Adjacent Reinforced Concrete Structures Strengthened by Cable Elements

    NASA Astrophysics Data System (ADS)

    Liolios, Angelos; Liolios, Asterios; Hatzigeorgiou, George; Radev, Stefan

    2014-06-01

    A numerical approach for estimating the effects of pounding (seismic interaction) on the response of adjacent Civil Engineering structures is presented. Emphasis is given to reinforced concrete (RC) frames of existing buildings which are seismically strengthened by cable-elements. A double discretization, in space by the Finite Element Method and in time by a direct incremental approach is used. The unilateral behaviours of both, the cable-elements and the interfaces contact-constraints, are taken strictly into account and result to inequality constitutive conditions. So, in each time-step, a non-convex linear complementarity problem is solved. It is found that pounding and cable strengthening have significant effects on the earthquake response and, hence, on the seismic upgrading of existing adjacent RC structures.

  14. Performance based seismic qualification of reinforced concrete nuclear materials processing facilities

    SciTech Connect

    Mertz, G.E.; Loceff, F.; Houston, T.; Rauls, G.; Mulliken, J.

    1997-09-01

    A seismic qualification of a reinforced concrete nuclear materials processing facility using performance based acceptance criteria is presented. Performance goals are defined in terms of a minimum annual seismic failure frequency. Pushover analyses are used to determine the building`s ultimate capacity and relate the capacity to roof drift and joint rotation. Nonlinear dynamic analyses are used to quantify the building`s drift using a suite of ground motion intensities representing varying soil conditions and levels of seismic hazard. A correlation between joint rotation and building drift to damage state is developed from experimental data. The damage state and seismic hazard are convolved to determine annual seismic failure frequency. The results of this rigorous approach is compared to those using equivalent force methods and pushover techniques recommended by ATC-19 and FEMA-273.

  15. Thermal sprayed titanium anode for cathodic protection of reinforced concrete bridges

    NASA Astrophysics Data System (ADS)

    Cramer, S. D.; Covino, B. S.; Holcomb, G. R.; Bullard, S. J.; Collins, W. K.; Govier, R. D.; Wilson, R. D.; Laylor, H. M.

    1999-03-01

    Stable operation of cobalt catalyzed thermal sprayed titanium anodes for cathodic protection (CP) of bridge reinforcing steel was maintained in accelerated tests for a period equivalent to 23 years service at Oregon Department of Transportation (Oregon DOT) bridge CP conditions with no evidence that operation would degrade with further aging. The cobalt catalyst dispersed into the concrete near the anodeconcrete interface with electrochemical aging to produce a more diffuse anode reaction zone. The titanium anode had a porous heterogeneous structure composed of α-titanium containing interstitial oxygen and nitrogen, and a fee phase thought to be Ti(O,N). Splat cooling rates were 10 to 150 K/s, and microstructures were produced by equilibrium processes at the splat solidification front. Nitrogen gas atomization during thermal spraying produced a coating with more uniform composition, less cracking, and lower resistivity than using air atomization.

  16. Analytical predictions for the performance of a reinforced concrete containment model subject to overpressurization

    SciTech Connect

    Weatherby, J.R.; Clauss, D.B.

    1987-01-01

    Under the sponsorship of the US Nuclear Regulatory Commission, Sandia National Laboratories is investigating methods for predicting the structural performance of nuclear reactor containment buildings under hypothesized severe accident conditions. As part of this program, a 1/6th-scale reinforced concrete containment model will be pressurized to failure in early 1987. Data generated by the test will be compared to analytical predictions of the structural response in order to assess the accuracy and reliability of the analytical techniques. As part of the pretest analysis effort, Sandia has conducted a number of analyses of the containment structure using the ABAQUS general purpose finite element code. This paper describes results from a nonlinear axisymmetric shell analysis as well as the material models and failure criteria used in conjunction with the analysis.

  17. Probabilistically based vulnerability index of reinforced concrete buildings due to rockfall impacts

    NASA Astrophysics Data System (ADS)

    Mavrouli, O.; Corominas, J.

    2009-04-01

    The assessment of the structural vulnerability of buildings which are threatened by rockfalls represents a very important part of the Quantitative Rockfall Risk assessment. The interest is mainly concentrated on the evaluation of a vulnerability rate for a structural typology, for a range of rockfall magnitudes, in order to be used as an input into the following risk equation: Risk=Hazard x Exposed elements x Vulnerability of exposed elements Up to now, the most popular approaches in practice are mainly empirically or judgmentally based, given the limited scientific background in the field of structural vulnerability evaluation due to rockfalls. The aim of the work that is presented here is to introduce a methodology for the quantified assessment of the vulnerability of reinforced concrete structures, which are subjected to potential rockfall impacts. The objective is to provide an output, in terms of a vulnerability rate, given a specific structure, rock boulder diameter and velocity at the moment of the impact. The presented methodology applies for direct rock impacts on the basement columns of reinforced concrete buildings. It is considered that only an impact on structural elements (columns, beams) may cause collapse of the structure, whether an impact on a non-structural element such as an infill wall may only result in local damage of the element itself. Here, the structural vulnerability is determined by the first type of damage, as in the case of structural collapse repairing maybe technically difficult as wells as highly costly up to the point of not applicable, while non-structural damage is maybe easier repaired. For the evaluation of the structural vulnerability of a building due to a rock impact, we have modified a methodology that we have previously developed, by introducing the probability of collapse. The vulnerability is thus obtained by combining the probability of building collapse with the impact probability. The steps are the following: 1

  18. Use of Glass Reinforced Concrete (GRC) as a substrate for photovoltaic modules

    NASA Technical Reports Server (NTRS)

    Eirls, J. L.

    1980-01-01

    A substrate for flat plate photovoltaic solar panel arrays using a glass fiber reinforced concrete (GRC) material was developed. The installed cost of this GRC panel is 30% less than the cost goal of the Near Term Low-Cost Flat Plate Photovoltaic Solar Array Program. The 4 ft by 8 ft panel is fabricated from readily available inexpensive materials, weighs a nominal 190 lbs., has exceptionally good strength and durability properties (rigid and resists weathering), is amenable to mass production and is easily installed on simple mountings. Solar cells are encapsulated in ethylene/vinyl acetate with Tedlar backing and Korad cover film. The laminates are attached to the GRC substrate with acrylic transfer tape and edge sealed with silicone RTV adhesive.

  19. Corrosion in Reinforced Concrete Panels: Wireless Monitoring and Wavelet-Based Analysis

    PubMed Central

    Qiao, Guofu; Sun, Guodong; Hong, Yi; Liu, Tiejun; Guan, Xinchun

    2014-01-01

    To realize the efficient data capture and accurate analysis of pitting corrosion of the reinforced concrete (RC) structures, we first design and implement a wireless sensor and network (WSN) to monitor the pitting corrosion of RC panels, and then, we propose a wavelet-based algorithm to analyze the corrosion state with the corrosion data collected by the wireless platform. We design a novel pitting corrosion-detecting mote and a communication protocol such that the monitoring platform can sample the electrochemical emission signals of corrosion process with a configured period, and send these signals to a central computer for the analysis. The proposed algorithm, based on the wavelet domain analysis, returns the energy distribution of the electrochemical emission data, from which close observation and understanding can be further achieved. We also conducted test-bed experiments based on RC panels. The results verify the feasibility and efficiency of the proposed WSN system and algorithms. PMID:24556673

  20. Strength and Durability of Fly Ash-Based Fiber-Reinforced Geopolymer Concrete in a Simulated Marine Environment

    NASA Astrophysics Data System (ADS)

    Martinez Rivera, Francisco Javier

    This research is aimed at investigating the corrosion durability of polyolefin fiberreinforced fly ash-based geopolymer structural concrete (hereafter referred to as GPC, in contradistinction to unreinforced geopolymer concrete referred to as simply geopolymer concrete), where cement is completely replaced by fly ash, that is activated by alkalis, sodium hydroxide and sodium silicate. The durability in a marine environment is tested through an electrochemical method for accelerated corrosion. The GPC achieved compressive strengths in excess of 6,000 psi. Fiber reinforced beams contained polyolefin fibers in the amounts of 0.1%, 0.3%, and 0.5% by volume. After being subjected to corrosion damage, the GPC beams were analyzed through a method of crack scoring, steel mass loss, and residual flexural strength testing. Fiber reinforced GPC beams showed greater resistance to corrosion damage with higher residual flexural strength. This makes GPC an attractive material for use in submerged marine structures.

  1. Man-made vitreous fiber produced from incinerator ash using the thermal plasma technique and application as reinforcement in concrete.

    PubMed

    Yang, Sheng-Fu; Wang, To-Mai; Lee, Wen-Cheng; Sun, Kin-Seng; Tzeng, Chin-Ching

    2010-10-15

    This study proposes using thermal plasma technology to treat municipal solid waste incinerator ashes. A feasible fiberization method was developed and applied to produce man-made vitreous fiber (MMVF) from plasma vitrified slag. MMVF were obtained through directly blending the oxide melt stream with high velocity compressed air. The basic technological characteristics of MMVF, including morphology, diameter, shot content, length and chemical resistance, are described in this work. Laboratory experiments were conducted on the fiber-reinforced concrete. The effects of fibrous content on compressive strength and flexural strength are presented. The experimental results showed the proper additive of MMVF in concrete can enhance its mechanical properties. MMVF products produced from incinerator ashes treated with the thermal plasma technique have great potential for reinforcement in concrete.

  2. Numerical Evaluation Of Shape Memory Alloy Recentering Braces In Reinforced Concrete Buildings Subjected To Seismic Loading

    NASA Astrophysics Data System (ADS)

    Charles, Winsbert Curt

    Seismic protective techniques utilizing specialized energy dissipation devices within the lateral resisting frames have been successfully used to limit inelastic deformation in reinforced concrete buildings by increasing damping and/or altering the stiffness of these structures. However, there is a need to investigate and develop systems with self-centering capabilities; systems that are able to assist in returning a structure to its original position after an earthquake. In this project, the efficacy of a shape memory alloy (SMA) based device, as a structural recentering device is evaluated through numerical analysis using the OpenSees framework. OpenSees is a software framework for simulating the seismic response of structural and geotechnical systems. OpenSees has been developed as the computational platform for research in performance-based earthquake engineering at the Pacific Earthquake Engineering Research Center (PEER). A non-ductile reinforced concrete building, which is modelled using OpenSees and verified with available experimental data is used for the analysis in this study. The model is fitted with Tension/Compression (TC) SMA devices. The performance of the SMA recentering device is evaluated for a set of near-field and far-field ground motions. Critical performance measures of the analysis include residual displacements, interstory drift and acceleration (horizontal and vertical) for different types of ground motions. The results show that the TC device's performance is unaffected by the type of ground motion. The analysis also shows that the inclusion of the device in the lateral force resisting system of the building resulted in a 50% decrease in peak horizontal displacement, and inter-story drift elimination of residual deformations, acceleration was increased up to 110%.

  3. Radio frequency tomography for the investigation of cracks in reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Negishi, Tadahiro; Gennarelli, Gianluca; Soldovieri, Francesco; Erricolo, Danilo

    2016-04-01

    We are interested in investigating the presence of cracks inside reinforced concrete structures using Radio Frequency Tomography (RFT). RFT applies electromagnetic waves to probe the environment and is based on the use of multiple transmitting and receiving antennas. RFT is a multistatic system where the volume under investigation is illuminated and observed from different directions, which results into an increase in resolution. In an application of RFT there are two main phases: the forward problem and the inverse reconstruction. The forward problem consists in the determination of the electromagnetic field scattered by the volume under investigation, which is illuminated by the transmitters. The scattered field depends on the spatial distribution of the dielectric permittivity in the volume under investigation. This distribution determines the contrast function. The inverse problem consists of the reconstruction of the contrast function from the scattered electromagnetic field. One of the challenges in RFT is the determination of the best approach to solve the inverse problem. In order to focus solely on the behavior of the inverse approach, we consider simplified geometries for the volume under investigation, such as a cylindrical concrete pillar with a metallic steel bar that is coaxial to the cylinder. In this way, it is possible to analytically evaluate the scattered electromagnetic field in an exact way. We then investigate the behavior of the reconstruction approach from the point of view of (1) geometry of the illumination and observation antennas; (2) frequency used to illuminate the volume under interest; (3) fusion of the results obtained at various frequencies.

  4. High rate response of ultra-high-performance fiber-reinforced concretes under direct tension

    SciTech Connect

    Tran, Ngoc Thanh; Tran, Tuan Kiet; Kim, Dong Joo

    2015-03-15

    The tensile response of ultra-high-performance fiber-reinforced concretes (UHPFRCs) at high strain rates (5–24 s{sup −} {sup 1}) was investigated. Three types of steel fibers, including twisted, long and short smooth steel fibers, were added by 1.5% volume content in an ultra high performance concrete (UHPC) with a compressive strength of 180 MPa. Two different cross sections, 25 × 25 and 25 × 50 mm{sup 2}, of tensile specimens were used to investigate the effect of the cross section area on the measured tensile response of UHPFRCs. Although all the three fibers generated strain hardening behavior even at high strain rates, long smooth fibers produced the highest tensile resistance at high rates whereas twisted fiber did at static rate. The breakages of twisted fibers were observed from the specimens tested at high strain rates unlike smooth steel fibers. The tensile behavior of UHPFRCs at high strain rates was clearly influenced by the specimen size, especially in post-cracking strength.

  5. A galvanic zinc-hydrogel system for cathodic protection of reinforced concrete structures

    SciTech Connect

    Wehling, J.E.

    1999-07-01

    Installations of galvanic cathodic protection anodes have been completed on bridge structures in Illinois, Virginia, Florida, Wisconsin, and Oregon, on parking garages in Illinois and Wisconsin, on high voltage transmission tower footings in California, and on condominium balconies in Florida. Some of these installations involve prestressed concrete. The installation of these systems will be described in detail and monitoring data will be presented for at least six months of active service. The system consists of a 10 mil zinc foil bonded to an ionically conductive hydrogel adhesive, which is applied directly to the surface of the steel-reinforced concrete. A copper wire connects the zinc anode to multiple steel rebars and/or strands. The performance is monitored by measuring the current flow in the wire, by measuring the amount of zinc consumed or, more generally, by taking depolarization readings at regular intervals. All of these measurements are an indication of the performance of the galvanic system and the corrosion of the steel rebars that is being prevented.

  6. Analytical Prediction of the Seismic Response of a Reinforced Concrete Containment Vessel

    SciTech Connect

    James, R.J.; Rashid, Y.R.; Cherry, J.L.; Chokshi, N.; Tsurumaki, S.

    1999-03-19

    Under the sponsorship of the Ministry of International Trade and Industry (MITI) of Japan, the Nuclear Power Engineering Corporation (NUPEC) is investigating the seismic behavior of a Reinforced Concrete Containment Vessel (RCCV) through scale-model testing using the high-performance shaking table at the Tadotsu Engineering Laboratory. A series of tests representing design-level seismic ground motions was initially conducted to gather valuable experimental measurements for use in design verification. Additional tests will be conducted with increasing amplifications of the seismic input until a structural failure of the test model occurs. In a cooperative program with NUPEC, the US Nuclear Regulatory Commission (USNRC), through Sandia National Laboratories (SNL), is conducting analytical research on the seismic behavior of RCCV structures. As part of this program, pretest analytical predictions of the model tests are being performed. The dynamic time-history analysis utilizes a highly detailed concrete constitutive model applied to a three-dimensional finite element representation of the test structure. This paper describes the details of the analysis model and provides analysis results.

  7. A visual approach to efficient analysis and quantification of ductile iron and reinforced sprayed concrete.

    PubMed

    Fritz, Laura; Hadwiger, Markus; Geier, Georg; Pittino, Gerhard; Gröller, M Eduard

    2009-01-01

    This paper describes advanced volume visualization and quantification for applications in non-destructive testing (NDT), which results in novel and highly effective interactive workflows for NDT practitioners. We employ a visual approach to explore and quantify the features of interest, based on transfer functions in the parameter spaces of specific application scenarios. Examples are the orientations of fibres or the roundness of particles. The applicability and effectiveness of our approach is illustrated using two specific scenarios of high practical relevance. First, we discuss the analysis of Steel Fibre Reinforced Sprayed Concrete (SFRSpC). We investigate the orientations of the enclosed steel fibres and their distribution, depending on the concrete's application direction. This is a crucial step in assessing the material's behavior under mechanical stress, which is still in its infancy and therefore a hot topic in the building industry. The second application scenario is the designation of the microstructure of ductile cast irons with respect to the contained graphite. This corresponds to the requirements of the ISO standard 945-1, which deals with 2D metallographic samples. We illustrate how the necessary analysis steps can be carried out much more efficiently using our system for 3D volumes. Overall, we show that a visual approach with custom transfer functions in specific application domains offers significant benefits and has the potential of greatly improving and optimizing the workflows of domain scientists and engineers.

  8. Physical and mechanical properties of carbon fiber reinforced smart porous concrete for planting

    NASA Astrophysics Data System (ADS)

    Park, Seung-Bum; Kim, Jung-Hwan; Seo, Dae-Seuk

    2005-05-01

    The reinforcement strength of porous concrete and its applicability as a recycled aggregate was measured. Changes in physical and mechanical properties, subsequent to the mixing of carbon fiber and silica fume, were examined, and the effect of recycled aggregate depending on their mixing rate was evaluated. The applicability of planting to concrete material was also assessed. The results showed that there were not any remarkable change in the porosity and strength characteristics although its proportion of recycled aggregate increased. Also, the mixture of 10% of silica was found to be most effective for strength enforcement. In case of carbon fiber, the highest flexural strength was obtained with its mixing rate being 3%. It was also noticed that PAN-derived carbon fiber was superior to Pitch-derived ones in view of strength. The evaluation of its use for vegetation proved that the growth of plants was directly affected by the existence of covering soil, in case of having the similar size of aggregate and void.

  9. Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment

    SciTech Connect

    Poupard, O.; Petre-Lazar, I.

    2006-03-15

    A detailed investigation of the chloride induced corrosion damage was performed on a 40 years old reinforced concrete beam exposed in marine environment. Visual observations, electrochemical measurements, carbonation depth, total chloride content were carried out. Half-cell potential measurements were used to locate corrosion areas. It appeared that the interpretation based on gradient of the potential was in good concordance with real state of damage. Complementary destructive methods are applied to observe the real corrosion state of steel rebars and characterize the corrosion products and the steel/concrete interface (optical and electronical microscopy tools (XRD, SEM, EDS and {mu}-Raman). All these data indicate that on the beam, one may distinguish two types of areas: 'high-corrosion zones' and 'low-corrosion zones.' Given the fact that the 'high corrosion zones' were found to be close to corrosion induced cracks and that they have a different morphology, this contribution concludes that the position of these areas did not shift in time.

  10. Towards Practical Carbonation Prediction and Modelling for Service Life Design of Reinforced Concrete Structures

    NASA Astrophysics Data System (ADS)

    Ekolu, O. S.

    2015-11-01

    Amongst the scientific community, the interest in durability of concrete structures has been high for quite a long time of over 40 years. Of the various causes of degradation of concrete structures, corrosion is the most widespread durability problem and carbonation is one of the two causes of steel reinforcement corrosion. While much scientific understanding has been gained from the numerous carbonation studies undertaken over the past years, it is still presently not possible to accurately predict carbonation and apply it in design of structures. This underscores the complex nature of the mechanisms as influenced by several interactive factors. Based on critical literature and some experience of the author, it is found that there still exist major challenges in establishing a mathematical constitutive relation for realistic carbonation prediction. While most current models employ permeability /diffusion as the main model property, analysis shows that the most practical material property would be compressive strength, which has a low coefficient of variation of 20% compared to 30 to 50% for permeability. This important characteristic of compressive strength, combined with its merit of simplicity and data availability at all stages of a structure's life, promote its potential use in modelling over permeability. By using compressive strength in carbonation prediction, the need for accelerated testing and permeability measurement can be avoided. This paper attempts to examine the issues associated with carbonation prediction, which could underlie the current lack of a sound established prediction method. Suggestions are then made for possible employment of different or alternative approaches.

  11. A vision-based technique for damage assessment of reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Farhidzadeh, Alireza; Ebrahimkhanlou, Arvin; Salamone, Salvatore

    2014-03-01

    The most common damage assessment technique for concrete structures is visual inspection (VI). Condition assessed by VI is subjective in nature, meaning it depends on the experience, knowledge, expertise, measurement accuracy, mental attention, and judgment of the inspector carrying out the assessment. In many post-event assessments, cracks data including width and pattern provide the most indicative information about the health or damage state of the structure. Residual cracks are sometimes the only available data for VI. However, due to adjacent elastic members, earthquake displacement spectrum, or re-centering systems, these measurements may lead to erroneous decisions. To overcome this problem, this paper proposes a novel damage index based upon Fractal Dimension (FD) analysis of residual cracks as a complementary method for VI. FD can quantify crack patterns and enhance the routine inspection procedure by establishing a crack pattern recognition system. This algorithm was validated through an experimental study on a large scale reinforced concrete shear wall (RCSW). The results demonstrate the novel technique as a quite accurate estimator for damage grades and stiffness loss of the wall.

  12. Assessment of (90)sr and (137)cs penetration into reinforced concrete (extent of "deepening") under natural atmospheric conditions.

    PubMed

    Farfán, Eduardo B; Gaschak, Sergey P; Maksymenko, Andrey M; Donnelly, Elizabeth H; Bondarkov, Mikhail D; Jannik, G Tim; Marra, James C

    2011-09-01

    When assessing the feasibility of remediation following the detonation of a radiological dispersion device or improvised nuclear device in a large city, several issues should be considered, including the levels and characteristics of the radioactive contamination, the availability of resources required for decontamination and the planned future use of the city's structures and buildings. Currently, little is known about radionuclide penetration into construction materials in an urban environment. Knowledge in this area would be useful when considering costs of a thorough decontamination of buildings, artificial structures and roads in an affected urban environment. Pripyat, a city substantially contaminated by the Chernobyl Nuclear Power Plant accident in April 1986, may provide some answers. The main objective of this study was to assess the depth of (90)Sr and (137)Cs penetration into reinforced concrete structures in a highly contaminated urban environment under natural weather conditions. Thirteen reinforced concrete core samples were obtained from external surfaces of a contaminated building in Pripyat. The concrete cores were drilled to obtain sample layers of 0-5, 5-10, 10-15, 15-20, 20-30, 30-40 and 40-50 mm. Both (90)Sr and (137)Cs were detected in the entire 0-50 mm profile of the reinforced cores sampled. In most of the cores, over 90% of the total (137)Cs inventory and 70% of the total (90)Sr inventory was found in the first 0-5 mm layer of the reinforced concrete. Strontium-90 ((90)Sr) had penetrated markedly deeper into the reinforced concrete structures than (137)Cs.

  13. Assessment of (90)sr and (137)cs penetration into reinforced concrete (extent of "deepening") under natural atmospheric conditions.

    PubMed

    Farfán, Eduardo B; Gaschak, Sergey P; Maksymenko, Andrey M; Donnelly, Elizabeth H; Bondarkov, Mikhail D; Jannik, G Tim; Marra, James C

    2011-09-01

    When assessing the feasibility of remediation following the detonation of a radiological dispersion device or improvised nuclear device in a large city, several issues should be considered, including the levels and characteristics of the radioactive contamination, the availability of resources required for decontamination and the planned future use of the city's structures and buildings. Currently, little is known about radionuclide penetration into construction materials in an urban environment. Knowledge in this area would be useful when considering costs of a thorough decontamination of buildings, artificial structures and roads in an affected urban environment. Pripyat, a city substantially contaminated by the Chernobyl Nuclear Power Plant accident in April 1986, may provide some answers. The main objective of this study was to assess the depth of (90)Sr and (137)Cs penetration into reinforced concrete structures in a highly contaminated urban environment under natural weather conditions. Thirteen reinforced concrete core samples were obtained from external surfaces of a contaminated building in Pripyat. The concrete cores were drilled to obtain sample layers of 0-5, 5-10, 10-15, 15-20, 20-30, 30-40 and 40-50 mm. Both (90)Sr and (137)Cs were detected in the entire 0-50 mm profile of the reinforced cores sampled. In most of the cores, over 90% of the total (137)Cs inventory and 70% of the total (90)Sr inventory was found in the first 0-5 mm layer of the reinforced concrete. Strontium-90 ((90)Sr) had penetrated markedly deeper into the reinforced concrete structures than (137)Cs. PMID:21799347

  14. ASSESSMENT OF 90SR AND 137CS PENETRATION INTO REINFORCED CONCRETE (EXTENT OF 'DEEPENING') UNDER NATURAL ATMOSPHERIC CONDITIONS

    SciTech Connect

    Farfan, E.; Jannik, T.

    2011-10-01

    When assessing the feasibility of remediation following the detonation of a radiological dispersion device or improvised nuclear device in a large city, several issues should be considered including the levels and characteristics of the radioactive contamination, the availability of resources required for decontamination, and the planned future use of the city's structures and buildings. Currently, little is known about radionuclide penetration into construction materials in an urban environment. Knowledge in this area would be useful when considering costs of a thorough decontamination of buildings, artificial structures, and roads in an affected urban environment. Pripyat, a city substantially contaminated by the Chernobyl Nuclear Power Plant accident in April 1986, may provide some answers. The main objective of this study was to assess the depth of {sup 90}Sr and {sup 137}Cs penetration into reinforced concrete structures in a highly contaminated urban environment under natural weather conditions. Thirteen reinforced concrete core samples were obtained from external surfaces of a contaminated building in Pripyat. The concrete cores were drilled to obtain sample layers of 0-5, 5-10, 10-15, 15-20, 20-30, 30-40, and 40-50 mm. Both {sup 90}Sr and {sup 137}Cs were detected in the entire 0-50 mm profile of the reinforced cores sampled. In most of the cores, over 90% of the total {sup 137}Cs inventory and 70% of the total {sup 90}Sr inventory was found in the first 0-5 mm layer of the reinforced concrete. {sup 90}Sr had penetrated markedly deeper into the reinforced concrete structures than {sup 137}Cs.

  15. Acoustic emission characterization of the onset of corrosion in reinforced concrete

    NASA Astrophysics Data System (ADS)

    Di Benedetti, M.; De Cais, E.; Karim, Z.; Loreto, G.; Presuel, F.; Nanni, A.

    2012-04-01

    The development of techniques capable of evaluating deterioration of reinforced concrete (RC) is instrumental to the advancement of the structural health monitoring (SHM) and service life estimate for constructed facilities. One of the main causes leading to degradation of RC is the corrosion of the steel reinforcement. This process can be modeled phenomenologically, while laboratory tests aimed at studying durability responses are typically accelerated in order to provide useful results within a realistic period of time. Among nondestructive methods, acoustic emission (AE) is emerging as a tool to detect the onset and progression of deterioration mechanisms. In this paper, the development of accelerated corrosion and continuous AE monitoring test set-up for RC specimens are presented. Relevant information are provided with regard to the characteristics of the corrosion circuit, continuous measurement and acquisition of corrosion potential, selection of AE sensors and AE parameter setting. Results from small-scale pre-notched RC specimens aim to isolate the frequency spectrum where the corrosion first takes place. Waveform analysis critical in the definition of a prognosis model will extend the AE dataset for the onset of corrosion.

  16. Load-induced debonding of FRP composites applied to reinforced concrete

    NASA Astrophysics Data System (ADS)

    Blok, Joel; Brown, Jeff

    2009-05-01

    Fiber-reinforced polymer (FRP) composites are widely used to increase the flexural and shear capacity of reinforced concrete (RC) elements. One potential disadvantage is that strengthened surfaces are no longer visible and cracks or delaminations that result from excessive loading or fatigue may go undetected. This research investigated thermal imaging techniques for monitoring and evaluating load-induced delamination of FRP composites applied to small scale RC beams. Two beams (3.5 in x 4.5 in x 58 in) were loaded monotonically to failure. Infrared thermography (IRT) inspections were performed at various load levels through failure using a composite phase imaging technique. Two similar beams were tested in fatigue and periodic IRT inspections were performed at 50,000-cycle intervals. Individual phase values for each pixel were designated as "well-bonded", "suspect" or "unbonded" to indicate the quality of FRP bond. Suspect areas included regions of excess thickened-epoxy tack-coat and smaller installation defects in the unloaded specimens. The long-term objective of this research is to develop a practical framework for conducting quantitative IRT inspections of FRP composites applied to RC and incorporating these results into acceptance criteria for new installations and predictions for the remaining service life of in-service FRP systems. This method may also offer insight into the necessity for repairs to in-service systems.

  17. DENA: A finite element program for the non-linear stress analysis of two-dimensional, metallic and reinforced concrete, structures

    NASA Astrophysics Data System (ADS)

    Ranjbaran, A.; Phipps, M. E.

    1994-04-01

    A finite element program for the nonlinear stress analysis of two-dimensional problems is introduced. Both metallic and reinforced concrete structures are considered. In the case of metals plasticity is taken into account. For reinforced concrete structures cracking of concrete in tension, plasticity and crushing of concrete in compression, and plasticity of reinforcement is accounted for. A new and unified model for embedding reinforcement in concrete elements is proposed. The proposed model is quite general in the sense that it can be used both for two- and three-dimensional problems. The theoretical basis of the program is presented. The accuracy, efficiency and robustness of the program and its implementation is verified through the analysis of two-dimensional problems.

  18. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag--An overview.

    PubMed

    Song, Ha-Won; Saraswathy, Velu

    2006-11-16

    The partial replacement of clinker, the main constituent of ordinary Portland cement by pozzolanic or latent hydraulic industrial by-products such as ground granulated blast furnace slag (GGBFS), effectively lowers the cost of cement by saving energy in the production process. It also reduces CO2 emissions from the cement plant and offers a low priced solution to the environmental problem of depositing industrial wastes. The utilization of GGBFS as partial replacement of Portland cement takes advantage of economic, technical and environmental benefits of this material. Recently offshore, coastal and marine concrete structures were constructed using GGBFS concrete because high volume of GGBFS can contribute to the reduction of chloride ingress. In this paper, the influence of using GGBFS in reinforced concrete structures from the durability aspects such as chloride ingress and corrosion resistance, long term durability, microstructure and porosity of GGBFS concrete has been reviewed and discussed.

  19. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag--An overview.

    PubMed

    Song, Ha-Won; Saraswathy, Velu

    2006-11-16

    The partial replacement of clinker, the main constituent of ordinary Portland cement by pozzolanic or latent hydraulic industrial by-products such as ground granulated blast furnace slag (GGBFS), effectively lowers the cost of cement by saving energy in the production process. It also reduces CO2 emissions from the cement plant and offers a low priced solution to the environmental problem of depositing industrial wastes. The utilization of GGBFS as partial replacement of Portland cement takes advantage of economic, technical and environmental benefits of this material. Recently offshore, coastal and marine concrete structures were constructed using GGBFS concrete because high volume of GGBFS can contribute to the reduction of chloride ingress. In this paper, the influence of using GGBFS in reinforced concrete structures from the durability aspects such as chloride ingress and corrosion resistance, long term durability, microstructure and porosity of GGBFS concrete has been reviewed and discussed. PMID:16930831

  20. Fiber optic sensors for an in-situ monitoring of moisture and pH value in reinforced concrete

    NASA Astrophysics Data System (ADS)

    Grahn, Walter; Makedonski, Pavel; Wichern, Juergen; Kowalsky, Wolfgang; Wiese, Stefan

    2002-01-01

    Concrete structures such as social buildings and bridges are important economic goods. Thus, maintenance and preservation of these structures are of major interest. Buildings of reinforced concrete are exposed to a variety of damaging influences. In particular, moisture has an important influence on the lifetime of concrete structures. This is caused by the involvement of free water in corrosion of the steel, and the fact that water acts as transport medium for damaging ions such as chloride, sulfate, carbonate and ammonium. Thus, we designed and developed an integrated fiberoptical sensor system, which allows in-situ non- destructive long-term monitoring of concrete structures. As moisture indicator we use a pyridinium-N-phenolat betainital dye, which shows a strong solvatochromic behavior in the ultraviolet-visible spectral range (UV-VIS). The dye is embedded in a polymer matrix, whose moderate polarity is enhanced by free water diffusing into the sensor. This leads to a continuous hypsochromic shift of the absorption spectrum according to the water concetration. Another appropriate dye is 4-amino-N-methylphthalimid, which shows a similar behavior in its fluorescent spectra, and presently we are developing its derivatives and suitable polymer matrices. The determination of the pH-value of concrete is of major importance for the assessment of acidic attacks which may lead to serious damage in reinforced concrete, as the embedded steel structures exhibit long-term stability (i.e. resistance to corrosion) only at pH-values of 9 or higher. Therefore we have developed a fiberoptical sensor system for the measurement of pH-values in concrete consisting of pH- indicator dyes immobilized in a highly immobilized in a highly hydrophilic polymer matrix. Any change in pH-value of the wet concrete material is indicated by a color change of the dye/polymer system. The sensor system displays long term stability even in aggressive media of pH12 - 13.

  1. Influence of Steel Reinforcement on In-Situ Stress Evaluation in Concrete Structures by the Core-Drilling Method

    SciTech Connect

    McGinnis, M. J.; Pessiki, S.

    2006-03-06

    The core-drilling method is an emerging technique for evaluating in-situ stress in a concrete structure. A small hole is drilled into the structure, and the deformations in the vicinity of the hole are measured and related via elasticity theory to the stress. The method is similar to the ASTM hole-drilling strain-gauge method excepting that displacements rather than strains are the measured quantities. The technique may be considered nondestructive since the ability of the structure to perform its function is unaffected, and the hole is easily repaired. Displacement measurements in the current work are performed using 3D digital image correlation and industrial photogrammetry. The current paper addresses perturbations in the method caused by steel reinforcement within the concrete. The reinforcement is significantly stiffer than the surrounding concrete, altering the expected displacement field. A numerical investigation performed indicates an under-prediction of stress by as much as 18 percent in a heavily reinforced structure, although the effect is significantly smaller for more common amounts of reinforcement.

  2. Corrosion detection of steel reinforced concrete using combined carbon fiber and fiber Bragg grating active thermal probe

    NASA Astrophysics Data System (ADS)

    Li, Weijie; Ho, Siu Chun Michael; Song, Gangbing

    2016-04-01

    Steel reinforcement corrosion is one of the dominant causes for structural deterioration for reinforced concrete structures. This paper presents a novel corrosion detection technique using an active thermal probe. The technique takes advantage of the fact that corrosion products have poor thermal conductivity, which will impede heat propagation generated from the active thermal probe. At the same time, the active thermal probe records the temperature response. The presence of corrosion products can thus be detected by analyzing the temperature response after the injection of heat at the reinforcement-concrete interface. The feasibility of the proposed technique was firstly analyzed through analytical modeling and finite element simulation. The active thermal probe consisted of carbon fiber strands to generate heat and a fiber optic Bragg grating (FBG) temperature sensor. Carbon fiber strands are used due to their corrosion resistance. Wet-dry cycle accelerated corrosion experiments were performed to study the effect of corrosion products on the temperature response of the reinforced concrete sample. Results suggest a high correlation between corrosion severity and magnitude of the temperature response. The technique has the merits of high accuracy, high efficiency in measurement and excellent embeddability.

  3. Nonlinear finite element analyses of FRP-reinforced concrete slabs using a new layered composite plate element

    NASA Astrophysics Data System (ADS)

    Zhu, Y.; Zhang, Y. X.

    2010-08-01

    A simple and shear-flexible rectangular composite layered plate element and nonlinear finite element analysis procedures are developed in this paper for nonlinear analysis of fiber reinforced plastic (FRP)-reinforced concrete slabs. The composite layered plate element is constructed based on Mindlin-Reissner plate theory and Timoshenko’s composite beam functions, and transverse shear effects and membrane-bending coupling effects are accounted for. Both geometric nonlinearity and material nonlinearity of the materials, which incorporates tension, compression, tension stiffening and cracking of the concrete, are included in the new model. The developed element and the nonlinear finite element analysis procedures are validated by comparing the computed numerical results of numerical examples with those obtained from experimental investigations and from the commercial finite element analysis package ABAQUS. The element is then employed to investigate the nonlinear structural behavior and the cracking progress of a clamped two-way FRP-reinforced concrete slab. The influences of reinforcement with different materials, ratio and layout in tension or compressive regions on structural behavior of the clamped slabs are investigated by parametric studies.

  4. Ribbed Swimsuit

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Langley Research Center's turbulent-drag reduction technology, as applied to airplanes and the winning yacht in America's Cup, finds another application: swimwear. The Strush SR swimsuit features silicon ribbing or "riblets" at the chest and buttocks, reducing friction in the water. Combined with innovations by its manufacturer, Arena North America, the company says the technology makes the suit 10 to 15 percent faster than any other world class swimsuit. The publicity for the Strush SR is handled by Suter Communications, Inc. *Company no longer exists (12/5/96).

  5. Effects of cement alkalinity, exposure conditions and steel-concrete interface on the time-to-corrosion and chloride threshold for reinforcing steel in concrete

    NASA Astrophysics Data System (ADS)

    Nam, Jingak

    Effects of (1) cement alkalinity (low, normal and high), (2) exposure conditions (RH and temperature), (3) rebar surface condition (as-received versus cleaned) and (4) density and distribution of air voids at the steel-concrete interface on the chloride threshold and time-to-corrosion for reinforcing steel in concrete have been studied. Also, experiments were performed to evaluate effects of RH and temperature on the diffusion of chloride in concrete and develop a method for ex-situ pH measurement of concrete pore water. Once specimens were fabricated and exposed to a corrosive chloride solution, various experimental techniques were employed to determine time-to-corrosion, chloride threshold, diffusion coefficient and void density along the rebar trace as well as pore water pH. Based upon the resultant data, several findings related to the above parameters have been obtained as summarized below. First, time for the corrosion initiation was longest for G109 concrete specimens with high alkalinity cement (HA). Also, chloride threshold increased with increasing time-to-corrosion and cement alkalinity. Consequently, the HA specimens exhibited the highest chloride threshold compared to low and normal alkalinity ones. Second, high temperature and temperature variations reduced time-to-corrosion of reinforcing steel in concrete since chloride diffusion was accelerated at higher temperature and possibly by temperature variations. The lowest chloride threshold values were found for outdoor exposed specimens suggesting that variation of RH or temperature (or both) facilitated rapid chloride diffusion. Third, an elevated time-to-corrosion and chloride threshold values were found for the wire brushed steel specimens compared to as-received ones. The higher ratio of [OH-]/[Fe n+] on the wire brushed steel surface compared to that of as-received case can be the possible cause because the higher ratio of this parameter enables the formation of a more protective passive film on

  6. Consumable and non-consumable thermal spray anodes for impressed current cathodic protection of reinforced concrete structures

    SciTech Connect

    Covino, B.S. Jr.; Cramer, S.D.; Bullard, Sophie J.; Holcomb, Gordon R.; Collins, Wesley K.; McGill, G.E.

    1998-01-01

    A comparison is presented of some of the differences between thermal spray Zn, a consumable anode, and catalyzed thermal spray Ti, a non-consumable anode, used for impressed current cathodic protection of reinforced concrete structures. The thermal spray process for both Ti and Zn is compared using the spray parameters, atomizing gases, spray rate, and cost. The thermal spray Ti and Zn coatings are compared in terms of physical properties, composition, and structure. Results of accelerated laboratory experiments are presented and comparisons between Ti and Zn are made on the effect of electrochemical aging on voltage requirements, bond strength, coating resistivity, water permeability, and anode-concrete interracial composition.

  7. Design and operating characteristics of cathodic protection systems associated with large seawater intake reinforced concrete structures in the Arabian Gulf

    SciTech Connect

    Ali, M.; Chaudhary, Z.; Al-Muhid, T.M.M.

    1999-07-01

    The large reinforced concrete seawater intake structures, which are part of a cooling system in several petrochemical plants located in the Arabian Gulf, have been catholically protected to arrest chloride-induced corrosion of the steel reinforcement. The cathodic protection systems have an operating history of 1--5 years. The design and operating features of the cathodic protection systems are described and discussed. Monitoring data of each system collected over the years since commissioning of the systems are described and discussed to evaluate performance of each system.

  8. Constitutive modelling of fiber-reinforced concrete under uniaxial tensile loading

    NASA Astrophysics Data System (ADS)

    Kullaa, Jyrki

    1993-01-01

    The mechanics of fiber reinforced concrete under uniaxial loading is studied. The focus is on the behavior after cracking. The interaction between the fiber and the matrix is the shear stress transfer. The stress can be elastic or frictional in nature. The bond parameters can be obtained by a simple pull-out test and theory. The load displacement curves for fibers of different lengths can be created by means of the calculated parameters. In a simple constitutive model, the main assumption is that the fibers are continuous and there exists multiple cracking in the matrix. After cracking, the fibers only carry the loading. The model uses efficiency factors in taking into account the short and randomly distributed fibers. Only the strengthening portion of the stress strain curve is analyzed. In the statistical model created, it is assumed that only one crack will develop. The theory ignores the strain of the matrix in fiber pull-out. The strain softening behavior is taken into consideration. A constitutive model which takes into account the strain softening part of the stress strain curve is developed. The crack distance and crack width are also calculated. The model takes into account one crack or multiple cracking states and different fracture mechanisms: fiber fracture or pull-out. The fibers are smooth and straight. They can be short or continuous, aligned or randomly distributed, brittle or ductile, and stiff or flexible. reinforced ceramics.

  9. A new discrete-element approach for the assessment of the seismic resistance of composite reinforced concrete-masonry buildings

    SciTech Connect

    Calio, I.; Cannizzaro, F.; Marletta, M.; Panto, B.; D'Amore, E.

    2008-07-08

    In the present study a new discrete-element approach for the evaluation of the seismic resistance of composite reinforced concrete-masonry structures is presented. In the proposed model, unreinforced masonry panels are modelled by means of two-dimensional discrete-elements, conceived by the authors for modelling masonry structures, whereas the reinforced concrete elements are modelled by lumped plasticity elements interacting with the masonry panels through nonlinear interface elements. The proposed procedure was adopted for the assessment of the seismic response of a case study confined-masonry building which was conceived to be a typical representative of a wide class of residential buildings designed to the requirements of the 1909 issue of the Italian seismic code and widely adopted in the aftermath of the 1908 earthquake for the reconstruction of the cities of Messina and Reggio Calabria.

  10. Nonlinear Earthquake Analysis of Reinforced Concrete Frames with Fiber and Bernoulli-Euler Beam-Column Element

    PubMed Central

    Karaton, Muhammet

    2014-01-01

    A beam-column element based on the Euler-Bernoulli beam theory is researched for nonlinear dynamic analysis of reinforced concrete (RC) structural element. Stiffness matrix of this element is obtained by using rigidity method. A solution technique that included nonlinear dynamic substructure procedure is developed for dynamic analyses of RC frames. A predicted-corrected form of the Bossak-α method is applied for dynamic integration scheme. A comparison of experimental data of a RC column element with numerical results, obtained from proposed solution technique, is studied for verification the numerical solutions. Furthermore, nonlinear cyclic analysis results of a portal reinforced concrete frame are achieved for comparing the proposed solution technique with Fibre element, based on flexibility method. However, seismic damage analyses of an 8-story RC frame structure with soft-story are investigated for cases of lumped/distributed mass and load. Damage region, propagation, and intensities according to both approaches are researched. PMID:24578667

  11. Nonlinear earthquake analysis of reinforced concrete frames with fiber and Bernoulli-Euler beam-column element.

    PubMed

    Karaton, Muhammet

    2014-01-01

    A beam-column element based on the Euler-Bernoulli beam theory is researched for nonlinear dynamic analysis of reinforced concrete (RC) structural element. Stiffness matrix of this element is obtained by using rigidity method. A solution technique that included nonlinear dynamic substructure procedure is developed for dynamic analyses of RC frames. A predicted-corrected form of the Bossak-α method is applied for dynamic integration scheme. A comparison of experimental data of a RC column element with numerical results, obtained from proposed solution technique, is studied for verification the numerical solutions. Furthermore, nonlinear cyclic analysis results of a portal reinforced concrete frame are achieved for comparing the proposed solution technique with Fibre element, based on flexibility method. However, seismic damage analyses of an 8-story RC frame structure with soft-story are investigated for cases of lumped/distributed mass and load. Damage region, propagation, and intensities according to both approaches are researched.

  12. Estimation of broadband acoustic power radiated from a turbulent boundary layer-driven reinforced finite plate section due to rib and boundary forces.

    PubMed

    Rumerman, M L

    2002-03-01

    Previous papers considered an infinite fluid-loaded plate with parallel line attachments, driven by a wave-number-white pressure excitation invariant in the direction of an attachment, and established the conditions and procedure for estimating the broadband radiated power by assuming the ribs to radiate independently. This paper applies those results to a finite rectangular ribbed plate, and extends the methodology to include the contribution of the plate's boundary support forces to the radiation and the consideration of excitation that varies in the direction parallel to the ribs. The approach is relevant to problems of sound radiation by underwater stiffened steel plates driven by turbulent boundary layer (TBL) pressures, and is also applicable to stiffened circular cylindrical shells when the response is dominated by bending. Comparisons of sample calculations with results of rigorous models validate the approximation.

  13. Refinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams.

    PubMed

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2015-01-01

    Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) deep beams. This study aims to refine STM through the strut effectiveness factor and increase result accuracy. Six RC deep beams with different shear span to effective-depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were experimentally tested under a four-point bending set-up. The ultimate shear strength of deep beams obtained from non-linear finite element modeling and STM recommended by ACI 318-11 as well as AASHTO LRFD (2012) were compared with the experimental results. An empirical equation was proposed to modify the principal tensile strain value in the bottle-shaped strut of deep beams. The equation of the strut effectiveness factor from AASHTTO LRFD was then modified through the aforementioned empirical equation. An investigation on the failure mode and crack propagation in RC deep beams subjected to load was also conducted.

  14. Corrosion Assessment of Steel Bars Used in Reinforced Concrete Structures by Means of Eddy Current Testing.

    PubMed

    de Alcantara, Naasson P; da Silva, Felipe M; Guimarães, Mateus T; Pereira, Matheus D

    2015-12-24

    This paper presents a theoretical and experimental study on the use of Eddy Current Testing (ECT) to evaluate corrosion processes in steel bars used in reinforced concrete structures. The paper presents the mathematical basis of the ECT sensor built by the authors; followed by a finite element analysis. The results obtained in the simulations are compared with those obtained in experimental tests performed by the authors. Effective resistances and inductances; voltage drops and phase angles of wound coil are calculated using both; simulated and experimental data; and demonstrate a strong correlation. The production of samples of corroded steel bars; by using an impressed current technique is also presented. The authors performed experimental tests in the laboratory using handmade sensors; and the corroded samples. In the tests four gauges; with five levels of loss-of-mass references for each one were used. The results are analyzed in the light of the loss-of-mass and show a strong linear behavior for the analyzed parameters. The conclusions emphasize the feasibility of the proposed technique and highlight opportunities for future works.

  15. The Performance Analysis of Distributed Brillouin Corrosion Sensors for Steel Reinforced Concrete Structures

    PubMed Central

    Wei, Heming; Zhao, Xuefeng; Kong, Xianglong; Zhang, Pinglei; Cui, Yanjun; Sun, Changsen

    2014-01-01

    The Brillouin optical time-domain analysis (BOTDA)-based optical fiber method has been proposed to measure strain variations caused by corrosion expansion. Spatial resolutions of 1 m can be achieved with this kind of Brillouin sensor for detecting the distributed strain. However, when the sensing fiber is wound around the steel rebar in a number of circles in a range of several meters, this spatial resolution still has limitations for corrosion monitoring. Here, we employed a low-coherent fiber-optic strain sensor (LCFS) to survey the performance of Brillouin sensors based on the fact that the deformation measured by the LCFS equals the integral of the strains obtained from Brillouin sensors. An electrochemical accelerated corrosion experiment was carried out and the corrosion expansion was monitored by both BOTDA and the LCFS. Results demonstrated that the BOTDA can only measure the expansion strain of about 1,000 με, which was generated by the 18 mm steel rebar corrosion, but, the LCFS had high sensitivity from the beginning of corrosion to the destruction of the structure, and no obvious difference in expansion speed was observed during the acceleration stage of the corrosion developed in the reinforced concrete (RC) specimens. These results proved that the BOTDA method could only be employed to monitor the corrosion inside the structure in the early stage. PMID:24379048

  16. Self-immunity microcapsules for corrosion protection of steel bar in reinforced concrete

    NASA Astrophysics Data System (ADS)

    Wang, Yanshuai; Fang, Guohao; Ding, Weijian; Han, Ningxu; Xing, Feng; Dong, Biqin

    2015-12-01

    A novel microcapsule-based self-immunity system for reinforced concrete is proposed. Its feasibility for hindering the corrosion of steel rebar by means of lifting the threshold value of [Cl-]/[OH-] is discussed. Precisely controlled release behavior enables corrosion protection in the case of depassivation. The release process is characterized over a designated range of pH values, and its release characteristics of the microcapsules, triggered by decreasing pH value, are captured by observing that the core crystals are released when exposed to a signal (stimulus). The aim of corrosion protection of steel bar is achieved through the constantly-stabilized passive film, and its stability is promoted using continuous calcium hydroxide released from the microcapsule, restoring alkaline conditions. The test results exhibited that the release process of the microcapsules is a function of time. Moreover, the release rate of core materials could interact with environmental pH value, in which the release rate is found to increase remarkably with decreasing pH value, but is inhibited by high pH levels.

  17. Acoustic Emission Monitoring of Multicell Reinforced Concrete Box Girders Subjected to Torsion

    PubMed Central

    Bagherifaez, Marya; Behnia, Arash; Majeed, Abeer Aqeel; Hwa Kian, Chai

    2014-01-01

    Reinforced concrete (RC) box girders are a common structural member for road bridges in modern construction. The hollow cross-section of a box girder is ideal in carrying eccentric loads or torques introduced by skew supports. This study employed acoustic emission (AE) monitoring on multicell RC box girder specimens subjected to laboratory-based torsion loading. Three multicell box girder specimens with different cross-sections were tested. The aim is to acquire AE analysis data indicative for characterizing torsion fracture in the box girders. It was demonstrated through appropriate parametric analysis that the AE technique could be utilized to effectively classify fracture developed in the specimens for describing their mechanical behavior under torsion. AE events localization was presented to illustrate the trend of crack and damage propagation in different stages of fracture. It could be observed that spiral-like patterns of crack were captured through AE damage localization system and damage was quantified successfully in different stages of fracture by using smoothed b-value analysis. PMID:25180203

  18. A reliability assessment of physical vulnerability of reinforced concrete walls loaded by snow avalanches

    NASA Astrophysics Data System (ADS)

    Favier, P.; Bertrand, D.; Eckert, N.; Naaim, M.

    2014-03-01

    Snow avalanches are a threat to many kinds of elements (human beings, communication axes, structures, etc.) in mountain regions. For risk evaluation, the vulnerability assessment of civil engineering structures such as buildings and dwellings exposed to avalanches still needs to be improved. This paper presents an approach to determine the fragility curves associated with reinforced concrete (RC) structures loaded by typical avalanche pressures and provides quantitative results for different geometrical configurations. First, several mechanical limit states of the RC wall are defined using classical engineering approaches (Eurocode 2), and the pressure of structure collapse is calculated from the usual yield line theory. Next, the fragility curve is evaluated as a function of avalanche loading using a Monte Carlo approach, and sensitivity studies (Sobol indices) are conducted to estimate the respective weight of the RC wall model inputs. Finally, fragility curves and relevant indicators such a their mean and fragility range are proposed for the different structure boundary conditions analyzed. The influence of the input distributions on the fragility curves is investigated. This shows the wider fragility range and/or the slight shift in the median that has to be considered when a possible slight change in mean/standard deviation/inter-variable correlation and/or the non-Gaussian nature of the input distributions is accounted for.

  19. A reliability assessment of physical vulnerability of reinforced concrete walls loaded by snow avalanches

    NASA Astrophysics Data System (ADS)

    Favier, P.; Bertrand, D.; Eckert, N.; Naaim, M.

    2013-06-01

    Snow avalanches are a threat to many kinds of elements (human beings, communication axes, structures, etc.) in mountain regions. For risk evaluation, the vulnerability assessment of civil engineering structures such as buildings and dwellings exposed to avalanches still needs to be improved. This paper presents an approach to determine the fragility curves associated with Reinforced Concrete (RC) structures loaded by typical avalanche pressures and provides quantitative results for different geometrical configurations. First, several mechanical limit states of the RC wall are defined using classical engineering approaches (Eurocodes - EC2), and the pressure of structure collapse is calculated from the usual yield line theory. Next, the failure probability is evaluated as a function of avalanche loading using a Monte Carlo approach, and sensitivity studies (Sobol indexes) are conducted to estimate the respective weight of the RC wall model inputs. Finally, fragility curves and relevant indicators such a their mean and fragility range are proposed for the different structure boundary conditions tested. The influence of the input distributions on the fragility curves is investigated. This shows the wider fragility range and/or the slight shift in the median that has to be considered when the possible correlation/non-Gaussian nature of the input distributions is accounted for.

  20. Acoustic emission monitoring of multicell reinforced concrete box girders subjected to torsion.

    PubMed

    Bagherifaez, Marya; Behnia, Arash; Majeed, Abeer Aqeel; Hwa Kian, Chai

    2014-01-01

    Reinforced concrete (RC) box girders are a common structural member for road bridges in modern construction. The hollow cross-section of a box girder is ideal in carrying eccentric loads or torques introduced by skew supports. This study employed acoustic emission (AE) monitoring on multicell RC box girder specimens subjected to laboratory-based torsion loading. Three multicell box girder specimens with different cross-sections were tested. The aim is to acquire AE analysis data indicative for characterizing torsion fracture in the box girders. It was demonstrated through appropriate parametric analysis that the AE technique could be utilized to effectively classify fracture developed in the specimens for describing their mechanical behavior under torsion. AE events localization was presented to illustrate the trend of crack and damage propagation in different stages of fracture. It could be observed that spiral-like patterns of crack were captured through AE damage localization system and damage was quantified successfully in different stages of fracture by using smoothed b-value analysis. PMID:25180203

  1. Assessment of dynamic mechanical behaviour of reinforced concrete beams using a blast simulator

    NASA Astrophysics Data System (ADS)

    Peroni, Marco; Solomos, George; Caverzan, Alessio; Larcher, Martin; Valsamos, Georgios

    2015-09-01

    Critical infrastructures may become the target of terrorist bombing attacks or may have to withstand explosive loads due to accidents. The impulsive load connected to explosions is delivered to the structure in a few milliseconds forcing it to respond or fail in a peculiar mode. With reference to the above scientific framework this work presents an innovative apparatus designed and developed at the European Laboratory for Structural Assessment to reproduce a blast pressure history without using explosives. This apparatus is practically a hybrid nitrogen-spring-driven actuator that accelerates masses of up to 100 kg to a maximum velocity of about 25 m/s that impact against the tested structure. The pressure-load history applied to the structure is modulated and reshaped using appropriate layers of elastic soft materials (such as polymeric foams) placed between the specimen and the impacting masses. Specific instrumentation has extensively been utilised to investigate the blast simulator performance and to precisely measure the pressure loads applied to the specimen. A series of tests on real scale reinforced concrete beams/columns (250 × 250 × 2200 mm) has been performed to efficiently assess the performance and potentiality of the new blast simulator. Results are under evaluation. In addition to the experimental work, a series of numerical simulations by means of the explicit FEM code EUROPLEXUS have been carried out to support and improve the equipment design.

  2. Non-Linear Seismic Response of Reinforced Concrete Slit Shear Walls

    NASA Astrophysics Data System (ADS)

    KWAN, A. K. H.; DAI, H.; CHEUNG, Y. K.

    1999-09-01

    The reinforced concrete slit shear wall system has been introduced recently as a new breed of earthquake resistant structures. Some theoretical and experimental investigations have been conducted to study the behaviour of isolated connecting beams and slit shear wall models under static load, but little work has been carried out to investigate the dynamic behaviour of the structural system. In this paper, the non-linear seismic response of slit shear walls under earthquake excitation is analyzed. Based on a simplified structural model, which is shown to have sufficient accuracy for slit shear wall structures, the influence of the elasto-plastic behaviour of the connecting beams on the dynamic response of the slit shear wall structure is evaluated. The results reveal that yielding of the connecting beams can significantly reduce the deflection response of the slit shear wall structure and the seismic loading induced on it. Moreover, there appears to be an optimum yield strength value for the connecting beams that would lead to the best overall seismic performance of the slit shear wall system.

  3. Self-immunity microcapsules for corrosion protection of steel bar in reinforced concrete

    PubMed Central

    Wang, Yanshuai; Fang, Guohao; Ding, Weijian; Han, Ningxu; Xing, Feng; Dong, Biqin

    2015-01-01

    A novel microcapsule-based self-immunity system for reinforced concrete is proposed. Its feasibility for hindering the corrosion of steel rebar by means of lifting the threshold value of [Cl−]/[OH−] is discussed. Precisely controlled release behavior enables corrosion protection in the case of depassivation. The release process is characterized over a designated range of pH values, and its release characteristics of the microcapsules, triggered by decreasing pH value, are captured by observing that the core crystals are released when exposed to a signal (stimulus). The aim of corrosion protection of steel bar is achieved through the constantly-stabilized passive film, and its stability is promoted using continuous calcium hydroxide released from the microcapsule, restoring alkaline conditions. The test results exhibited that the release process of the microcapsules is a function of time. Moreover, the release rate of core materials could interact with environmental pH value, in which the release rate is found to increase remarkably with decreasing pH value, but is inhibited by high pH levels. PMID:26673425

  4. Corrosion Assessment of Steel Bars Used in Reinforced Concrete Structures by Means of Eddy Current Testing

    PubMed Central

    de Alcantara, Naasson P.; da Silva, Felipe M.; Guimarães, Mateus T.; Pereira, Matheus D.

    2015-01-01

    This paper presents a theoretical and experimental study on the use of Eddy Current Testing (ECT) to evaluate corrosion processes in steel bars used in reinforced concrete structures. The paper presents the mathematical basis of the ECT sensor built by the authors; followed by a finite element analysis. The results obtained in the simulations are compared with those obtained in experimental tests performed by the authors. Effective resistances and inductances; voltage drops and phase angles of wound coil are calculated using both; simulated and experimental data; and demonstrate a strong correlation. The production of samples of corroded steel bars; by using an impressed current technique is also presented. The authors performed experimental tests in the laboratory using handmade sensors; and the corroded samples. In the tests four gauges; with five levels of loss-of-mass references for each one were used. The results are analyzed in the light of the loss-of-mass and show a strong linear behavior for the analyzed parameters. The conclusions emphasize the feasibility of the proposed technique and highlight opportunities for future works. PMID:26712754

  5. Probabilistic lifetime assessment of marine reinforced concrete with steel corrosion and cover cracking

    NASA Astrophysics Data System (ADS)

    Lu, Chun-Hua; Jin, Wei-Liang; Liu, Rong-Gui

    2011-06-01

    In order to study the durability behavior of marine reinforced concrete structure suffering from chloride attack, the structural service life is assumed to be divided into three critical stages, which can be characterized by steel corrosion and cover cracking. For each stage, a calculated model used to predict the lifetime is developed. Based on the definition of durability limit state, a probabilistic lifetime model and its time-dependent reliability analytical method are proposed considering the random natures of influencing factors. Then, the probabilistic lifetime prediction models are applied to a bridge pier located in the Hangzhou Bay with Monte Carlo simulation. It is found that the time to corrosion initiation t 0 follows a lognormal distribution, while that the time from corrosion initiation to cover cracking t 1 and the time for crack to develop from hairline crack to a limit crack width t 2 can be described by Weibull distributions. With the permitted failure probability of 5.0%, it is also observed that the structural durability lifetime mainly depends on the durability life t 0 and that the percentage of participation of the life t 0 to the total service life grows from 61.5% to 83.6% when the cover thickness increases from 40 mm to 80 mm. Therefore, for any part of the marine RC bridge, the lifetime predictions and maintenance efforts should also be directed toward controlling the stage of corrosion initiation induced by chloride ion.

  6. Multifractal analysis of two-dimensional images for damage assessment of reinforced concrete structures

    NASA Astrophysics Data System (ADS)

    Ebrahimkhanlou, Arvin; Farhidzadeh, Alireza; Salamone, Salvatore

    2015-03-01

    The most common assessment technique for reinforced concrete shear walls (RCSW) is Visual Inspection (VI). The current practice suffers from subjective and labor intensive nature as it highly relies on judgment and expertise of the inspectors. In post-earthquake events where urgent and objective decisions are crucial, failure of the conventional VI could be catastrophic. Conventional VI is mainly based on width of residual cracks. Given that cracks could close partially (e.g., due to weight of the structure, behavior of adjacent elastic members, earthquake displacement spectrum, etc.), methods based on crack width may lead to underestimating the state of damage and eventually an erroneous decision. This paper proposes a novel method to circumvent the aforementioned limitations by utilizing the information hidden in crack patterns. Crack patterns from images of the surface cracks on RCSW are extracted automatically, and Multifractal Analysis (MFA) are applied on them. Images were taken from two large scale low aspect ratio RCSW under quasi-static cyclic loading, and MFA showed clear correlation with tri-linear shear controlled behavior of walls which was observed in their backbone curves.

  7. Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

    NASA Astrophysics Data System (ADS)

    Sung, Y. C.; Lin, T. K.; Hsiao, C. C.; Lai, M. C.

    2013-09-01

    Since most current seismic capacity evaluations of reinforced concrete (RC) frame structures are implemented by either static pushover analysis (PA) or dynamic time history analysis, with diverse settings of the plastic hinges (PHs) on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints (BCJs) during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

  8. Refinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams

    PubMed Central

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2015-01-01

    Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) deep beams. This study aims to refine STM through the strut effectiveness factor and increase result accuracy. Six RC deep beams with different shear span to effective-depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were experimentally tested under a four-point bending set-up. The ultimate shear strength of deep beams obtained from non-linear finite element modeling and STM recommended by ACI 318-11 as well as AASHTO LRFD (2012) were compared with the experimental results. An empirical equation was proposed to modify the principal tensile strain value in the bottle-shaped strut of deep beams. The equation of the strut effectiveness factor from AASHTTO LRFD was then modified through the aforementioned empirical equation. An investigation on the failure mode and crack propagation in RC deep beams subjected to load was also conducted. PMID:26110268

  9. Refinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams.

    PubMed

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2015-01-01

    Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) deep beams. This study aims to refine STM through the strut effectiveness factor and increase result accuracy. Six RC deep beams with different shear span to effective-depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were experimentally tested under a four-point bending set-up. The ultimate shear strength of deep beams obtained from non-linear finite element modeling and STM recommended by ACI 318-11 as well as AASHTO LRFD (2012) were compared with the experimental results. An empirical equation was proposed to modify the principal tensile strain value in the bottle-shaped strut of deep beams. The equation of the strut effectiveness factor from AASHTTO LRFD was then modified through the aforementioned empirical equation. An investigation on the failure mode and crack propagation in RC deep beams subjected to load was also conducted. PMID:26110268

  10. Hysteretic behavior of special shaped columns composed of steel and reinforced concrete (SRC)

    NASA Astrophysics Data System (ADS)

    Chen, Zongping; Xu, Jinjun; Xue, Jianyang

    2015-06-01

    This paper describes a series of experimental investigations on seventeen specimens of steel reinforced concrete special shaped (SRCSS) columns under low cyclic reversed loading using parallel crosshead equipment. Nine T-shaped SRC columns, four L-shaped SRC columns and four +-shaped SRC columns were tested to examine the effects of shape steel configuration, loading angle, axial compressive ratio and shear-span ratio on the behavior (strength, stiffness, energy dissipation, ductility, etc.) of SRCSS column specimens. The failure modes and hysteretic performance of all the specimens were obtained in the tests. Test results demonstrate that the shear-span ratio is the main parameter affecting the failure modes of SRCSS columns. The specimens with small shear-span ratio are prone to shear failure, and the primary failure planes in SRCSS columns are parallel to the loading direction. As a result, there is a symmetry between positive and negative loading directions in the hysteretic curves of the SRCSS columns. The majority of displacement ductility coefficients for all the specimens are over 3.0, so that the SRCSS columns demonstrate a better deformation capacity. In addition, the equivalent viscous damping coefficients of all the specimens are greater than 0.2, indicating that the seismic behavior of SRCSS columns is adequate. Finally, the superposition theory was used to calculate the limits of axial compressive ratio for the specimens, and it is found that the test axial compressive ratio is close to or smaller than the calculated axial compressive ratio limit.

  11. Health monitoring of reinforced concrete structures based on PZT admittance signal

    NASA Astrophysics Data System (ADS)

    Wang, Dansheng; Zhu, Hongping; Shen, Danyan; Ge, Dongdong

    2009-07-01

    Reinforced concrete (RC) structure is one of most familiar engineering structure styles in the civil engineering community, which often suffer crack damage during their service life because of some factors such as overloading, excessive use, and bad environmental conditions. Thus early detection of crack damage is of special concern for RC structures. Piezoelectric materials have direct and converse piezoelectric effects and can serve as actuators or sensors. A health monitoring method based on PZT admittance signals is addressed in this paper, which use the electromechanical coupling property of piezoelectric materials. An experimental study on health monitoring of a RC beam is implemented based on the PZT admittance signals. In this experiment, the electrical admittances of distributed PZT sheets are measured when the host beams are suffering from variable loads. From the obtained PZT admittance curves one can find that the presence of incipient crack can be captured and the cracking load of the RC beam can also generally determined. By the experimental study it is concluded that the health monitoring technique is quite effective and sensitive for RC structures, which indicates its favorable application foreground in civil engineering field.

  12. Estimating displacement demand in reinforced concrete frames using some failure criteria

    NASA Astrophysics Data System (ADS)

    Monavari, Benyamin; Massumi, Ali

    2012-12-01

    Under seismic loads on structures, the maximum drift without total collapse is called target displacement. Most of low- and medium-rise building structures are seismically designed using equivalent static method. In equivalent static method, design forces are obtained from elastic spectra which are reduced using response modification factor. This coefficient represents the structures' inelastic performance and indicates strength and hidden ductility of structures in inelastic phase. The ultimate deformation of the structure to its deformation in yielding is called ductility coefficient which expresses the inelastic deformation capacity of structures. The larger this coefficient, the higher the level of energy absorption and the more the formation of plastic joints, so accurate determination of yielding points and ultimate displacements are very important. In this paper some failure criteria are used to estimate seismic demands for buildings. To investigate these criteria, pushover analysis is done on reinforced concrete frame buildings. Using a combination of these criteria will lead to displacements that are closed to the target displacement presented in FEMA-356.

  13. Dof-based submatrix scaling factors for damage detection in reinforced concrete bridges

    NASA Astrophysics Data System (ADS)

    Park, Kyeongtaek; Torbol, Marco

    2016-04-01

    This study focuses on the system identification and the damage detection of reinforced concrete bridges using neural network algorithm, eigenvalue analysis and parallel computing. First, autoregressive coefficients (ARCs) of both temporal output and forced input of the real structure are computed. The ARCs are used for the eigen-system realization algorithm (ERA) to obtain the modal parameters of the structure. Second, the ARCs are utilized as the input variable of the neural network algorithm while the outputs are the submatrix scaling factors that contain information about the degeneration of each element and each mode within the element. However, the neural network algorithm requires training to output reliable results. The training is the most challenging task of this study and finite element analysis is used to compute the modal parameters of the model built around the neural network outputs. The model is compared with the ERA results to update the neural network coefficients. Due to the scale of the neural network used parallel computing is necessary to reduce the computational time to a reasonable amount.

  14. 1994 Triggered Lightning Test Program: Measured responses of a reinforced concrete building under direct lightning attachments

    SciTech Connect

    Schnetzer, G.H.; Chael, J.; Davis, R.; Fisher, R.J.; Magnotti, P.J.

    1995-08-01

    A rocket-triggered lightning test was carried out during the summer of 1994 on a specially designed steel reinforced concrete test building located at Ft. McClellan, Alabama. Currents, voltages, and magnetic fields were measured at 24 instrumented locations during 42 return strokes triggered to designated points on the structure and its lightning protection systems. As was found during an earlier similar lightning test of an earth covered munitions storage building, the buried power service conduits carried a much larger fraction of incident stroke current away from the building than did the intended grounding elements of the lightning protection system. Electrical breakdown and subsequent arcing occurred repeatedly to create dominant current paths to earth that were not accounted for in pretest linear modeling. Potential hazard level transient voltages, surprisingly more resistive than inductive in nature, were recorded throughout the structure. Also surprisingly, strikes to a single grounded protection mast system resulted in internal environments that were generally comparable to those occurring during strikes to roof-mounted air terminals. A description of the test structure, experimental procedures, and a full set of the resultant data are presented in this two-volume report.

  15. Self-immunity microcapsules for corrosion protection of steel bar in reinforced concrete.

    PubMed

    Wang, Yanshuai; Fang, Guohao; Ding, Weijian; Han, Ningxu; Xing, Feng; Dong, Biqin

    2015-12-17

    A novel microcapsule-based self-immunity system for reinforced concrete is proposed. Its feasibility for hindering the corrosion of steel rebar by means of lifting the threshold value of [Cl(-)]/[OH(-)] is discussed. Precisely controlled release behavior enables corrosion protection in the case of depassivation. The release process is characterized over a designated range of pH values, and its release characteristics of the microcapsules, triggered by decreasing pH value, are captured by observing that the core crystals are released when exposed to a signal (stimulus). The aim of corrosion protection of steel bar is achieved through the constantly-stabilized passive film, and its stability is promoted using continuous calcium hydroxide released from the microcapsule, restoring alkaline conditions. The test results exhibited that the release process of the microcapsules is a function of time. Moreover, the release rate of core materials could interact with environmental pH value, in which the release rate is found to increase remarkably with decreasing pH value, but is inhibited by high pH levels.

  16. Separate effects testing and analyses to investigate liner tearing of the 1:6-scale reinforced concrete containment building

    SciTech Connect

    Spletzer, B.L.; Lambert, L.D.; Bergman, V.L.

    1995-06-01

    The overpressurization of a 1:6-scale reinforced concrete containment building demonstrated that liner tearing is a plausible failure mode in such structures under severe accident conditions. A combined experimental and analytical program was developed to determine the important parameters which affect liner tearing and to develop reasonably simple analytical methods for predicting when tearing will occur. Three sets of test specimens were designed to allow individual control over and investigation of the mechanisms believed to be important in causing failure of the liner plate. The series of tests investigated the effect on liner tearing produced by the anchorage system, the loading conditions, and the transition in thickness from the liner to the insert plate. Before testing, the specimens were analyzed using two- and three-dimensional finite element models. Based on the analysis, the failure mode and corresponding load conditions were predicted for each specimen. Test data and post-test examination of test specimens show mixed agreement with the analytical predictions with regard to failure mode and specimen response for most tests. Many similarities were also observed between the response of the liner in the 1:6-scale reinforced concrete containment model and the response of the test specimens. This work illustrates the fact that the failure mechanism of a reinforced concrete containment building can be greatly influenced by details of liner and anchorage system design. Further, it significantly increases the understanding of containment building response under severe conditions.

  17. Studies on Geometries for Inducing Homogeneous Magnetic Fields in the Application of Real Time Imaging of Steel Reinforcing Bars Embedded Within Pre-Stressed and Reinforced Concrete

    NASA Astrophysics Data System (ADS)

    Quek, S.; Benitez, D.; Gaydecki, P.; Torres, V.

    2006-03-01

    This paper addresses fundamental issues associated with the development of a real time inductive scanning system for non-destructive testing of pre-stressed and reinforced concrete. Simulated results has indicated that given a coil dimension of 300mm×300mm×2.5mm, 10mm rebars can be imaged down to a depth of 100 mm. Studies also indicate that the vertical component of the induced magnetic field is most favourable as it can be readily reconstructed to yield geometry and dimensional information pertaining to the rebar structure.

  18. Vibration based baseline updating method to localize crack formation and propagation in reinforced concrete members

    NASA Astrophysics Data System (ADS)

    Wahalathantri, Buddhi L.; Thambiratnam, David P.; Chan, Tommy H. T.; Fawzia, Sabrina

    2015-05-01

    Structural Health Monitoring (SHM) schemes are useful for proper management of the performance of structures and for preventing their catastrophic failures. Vibration based SHM schemes has gained popularity during the past two decades resulting in significant research. It is hence evitable that future SHM schemes will include robust and automated vibration based damage assessment techniques (VBDAT) to detect, localize and quantify damage. In this context, the Damage Index (DI) method which is classified as non-model or output based VBDAT, has the ability to automate the damage assessment process without using a computer or numerical model along with actual measurements. Although damage assessment using DI methods have been able to achieve reasonable success for structures made of homogeneous materials such as steel, the same success level has not been reported with respect to Reinforced Concrete (RC) structures. The complexity of flexural cracks is claimed to be the main reason to hinder the applicability of existing DI methods in RC structures. Past research also indicates that use of a constant baseline throughout the damage assessment process undermines the potential of the Modal Strain Energy based Damage Index (MSEDI). To address this situation, this paper presents a novel method that has been developed as part of a comprehensive research project carried out at Queensland University of Technology, Brisbane, Australia. This novel process, referred to as the baseline updating method, continuously updates the baseline and systematically tracks both crack formation and propagation with the ability to automate the damage assessment process using output only data. The proposed method is illustrated through examples and the results demonstrate the capability of the method to achieve the desired outcomes.

  19. The determination of the constitutive parameters of a medium with application to a reinforced concrete pad

    SciTech Connect

    Poggio, A.J.; Burke, G.J.; Pennock, S.T.

    1995-01-15

    This report describes the experimental and analytical program performed to determine the constitutive parameters of the reinforced concrete pad in the test facility used during the Low Power On-the-Ground portion of the NASA Boeing 757 HIRF Tests. These tests were conducted during the period September 20 to October 21, 1994 in the LESLI facility at the Phillips Laboratory, Kirtland AFB, NM. The on-the-ground tests were designed to meet several objectives including support of a flight test series and the generation of data for the validation of codes and models that could be used to predict the electromagnetic environment in transport aircraft. To satisfy these objectives, tests were to be executed in a known environment and the data compared to modeling results. A critical feature of this testing was the ``known environment`` which implies knowledge of the parameters which are critical to an effective modeling activity and which could include, among many other things, definitions of the airplane and its physical and electrical configuration, the ground upon which it sits when stationary, the fields impinging on the aircraft, and the radiating or bounding structure in the simulator. The authors would want to specify the electromagnetic characteristics of the entire space that would likely enter into a mathematical modeling effort so that the model can be made as ``close`` to physical reality as desired prior to exercising computational algorithms which might introduce their own uncertainties. Since the authors are evaluating codes used for determination of the electromagnetic environment in aircraft and since the on-the-ground test involved an airplane parked on a pad in the simulator facility, they would require a definition of the constitutive parameters of the pad.

  20. Experimental evaluation of natural period of masonry and reinforced concrete structures during operative conditions

    NASA Astrophysics Data System (ADS)

    Carlo Ponzo, Felice; Ditommaso, Rocco; Auletta, Gianluca; Nigro, Antonella; Iacovino, Chiara; Salvatore Nigro, Domenico

    2016-04-01

    This work focuses on the experimental evaluation of the fundamental period of buildings of various types (masonry and reinforced concrete) using measurements of ambient vibrations on real buildings located in Basilicata (Italy) and numerical analyses. The results are compared with the simplified formula provided by the Seismic Italian Code (NTC2008), that is function of structural typology and height for both near collapse and limited damage limit states and experimental results provided by the recent scientific literature. With the intention of proposing simplified relationships to evaluate the fundamental period of buildings, several numerical and experimental campaigns, on different structures all around the world, have been carried out in the last years in order to calibrate different kind of formulas. Most of formulas retrieved from both numerical and experimental analyses provides vibration periods smaller than those suggested by the NTC2008. However, it is well known that the fundamental period of a structure play a key role in the correct evaluation of the spectral acceleration for seismic static analyses. Generally, simplified approaches impose the use of safety factors greater than those related to in depth nonlinear analyses with the aim to cover possible unexpected uncertainties. Using the simplified formula proposed by the Italian seismic code the fundamental period is quite higher than fundamental periods experimentally evaluated on real structures, with the consequence that the spectral acceleration adopted in the seismic static analysis may be significantly different than real spectral acceleration. This approach could produces a decreasing in safety factors obtained using linear seismic static analyses. Based on numerical and experimental evidences, the authors suggest a possible update of the seismic codes formula for the simplified estimation of the fundamental period of vibration of existing masonry and RC buildings. Acknowledgements This study

  1. Detection of bond failure in the anchorage zone of reinforced concrete beams via acoustic emission monitoring

    NASA Astrophysics Data System (ADS)

    Abouhussien, Ahmed A.; Hassan, Assem A. A.

    2016-07-01

    In this study, acoustic emission (AE) monitoring was utilised to identify the onset of bond failure in reinforced concrete beams. Beam anchorage specimens were designed and tested to fail in bond in the anchorage zone. The specimens included four 250 × 250 × 1500 mm beams with four variable bonded lengths (100, 200, 300, and 400 mm). Meanwhile, an additional 250 × 250 × 2440 mm beam, with 200 mm bonded length, was tested to investigate the influence of sensor location on the identification of bond damage. All beams were tested under four-point loading setup and continuously monitored using three distributed AE sensors. These attached sensors were exploited to record AE signals resulting from both cracking and bond deterioration until failure. The variations in the number of AE hits and cumulative signal strength (CSS) versus test time were evaluated to achieve early detection of crack growth and bar slippage. In addition, AE intensity analysis was performed on signal strength of collected AE signals to develop two additional parameters: historic index (H (t)) and severity (S r). The analysis of these AE parameters enabled an early detection of both first cracks (at almost the mid-span of the beam) and bar slip in either of the anchorage zones at the beams’ end before their visual observation, regardless of sensor location. The results also demonstrated a clear correlation between the damage level in terms of crack development/measured free end bar slip and AE parameters (number of hits, CSS, H(t), and S r).

  2. Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study

    NASA Astrophysics Data System (ADS)

    Zhang, Yunfeng; Hu, Xiaobin

    2010-06-01

    This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose, an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters — the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio, peak acceleration ratio, energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.

  3. Effects of near-fault ground motions on the nonlinear behaviour of reinforced concrete framed buildings

    NASA Astrophysics Data System (ADS)

    Mazza, Mirko

    2015-07-01

    The design provisions of current seismic codes are generally not very accurate for assessing effects of near-fault ground motions on reinforced concrete (r.c.) spatial frames, because only far-fault ground motions are considered in the seismic codes. Strong near-fault earthquakes are characterized by long-duration (horizontal) pulses and high values of the ratio α PGA of the peak value of the vertical acceleration, PGAV, to the analogous value of the horizontal acceleration, PGAH, which can become critical for girders and columns. In this work, six- and twelve-storey r.c. spatial frames are designed according to the provisions of the Italian seismic code, considering the horizontal seismic loads acting (besides the gravity loads) alone or in combination with the vertical ones. The nonlinear seismic analysis of the test structures is performed using a step-by-step procedure based on a two-parameter implicit integration scheme and an initial stress-like iterative procedure. A lumped plasticity model based on the Haar-Kàrmàn principle is adopted to model the inelastic behaviour of the frame members. For the numerical investigation, five near-fault ground motions with high values of the acceleration ratio α PGA are considered. Moreover, following recent seismological studies, which allow the extraction of the largest (horizontal) pulse from a near-fault ground motion, five pulse-type (horizontal) ground motions are selected by comparing the original ground motion with the residual motion after the pulse has been extracted. The results of the nonlinear dynamic analysis carried out on the test structures highlighted that horizontal and vertical components of near-fault ground motions may require additional consideration in the seismic codes.

  4. Shear reinforcement effect of reinforced concrete tie-columns on the lateral resistance of confined masonry walls

    NASA Astrophysics Data System (ADS)

    Bouhedja, Samir; Bourzam, Abdelkrim; Boukhaled, Ahmed; Nechnech, Ammar

    2016-06-01

    Tie-columns improve significantly the lateral resistance of masonry bearing walls against persistent, transient and accidental loads. The research work described herein has been carried out to assess the lateral resistance of confined masonry walls, where contribution of the masonry panel is evaluated according to material mechanics and tie-columns effect is estimated by a proposed analytical formulation based on a model reported on previously. This approach takes into account the effect of dowel support on the reaction of its adjacent shear reinforcement: the conditions for the various contributions of transverse reinforcements are better defined following a clear evaluation of the participation ratio of these reinforcements. Lateral resistances of confined masonry walls measured in full-scale tests and gleaned from the literature are compared and checked with resistances calculated using the present approach.

  5. A new, high current output, galvanic (sacrificial) anode, electrochemical rehabilitation system for reinforced and prestressed concrete structures

    SciTech Connect

    Clear, K.C.

    1999-07-01

    This paper summarizes 1995 through 1998 laboratory, outdoor exposure facility, and field data on the subject concrete rehab system. The system shows promise as a means of providing cathodic protection to the reinforcing, as a chloride removal process, as a re-alkalization process, and/or as a lithium injection procedure to minimize alkali-aggregate reactions in the concrete. Unique characteristics of the system include: (1) Surrounding each galvanic anode with a highly corrosive liquid which maintains it (the anode) at peak output voltage throughout its life; and (2) Placing an ionic transfer layer between the anode and the concrete surface that is high volume, low resistivity and deliquescent (i.e. pulls water vapor out of the air at relative humidities of 35% or higher). The ionic transfer layer typically consists of sponge, felt or sand loaded with calcium chloride (and/or other chemicals such as sodium hydroxide, potassium acetate, and lithium-salts). In some cases it also contains a wetting agent and is encapsulated (fully or partially) in vapor permeable, but water impermeable materials. The ionic transfer layer will not freeze at temperatures as low as {minus}20 C ({minus}5 F), and provides sufficient space for all anode corrosion products, thus preventing undesirable stresses on the concrete, the anode assembly and any cosmetic covering.

  6. Numerical Modelling of Reinforced Concrete Slabs under Blast Loads of Close-in Detonations Using the Lagrangian Approach

    NASA Astrophysics Data System (ADS)

    Shuaib, M.; Daoud, O.

    2015-07-01

    This paper includes an investigation for the deformations, including deflections and damage modes, which occur in reinforced concrete (RC) slabs when subjected to blast loads of explosions. The slab considered for the investigation is a one-way square RC slab with the dimensions of 1000 x 1000 x 40 mm, fixed supported at two opposite sides. It was subjected to close-in detonations of three different charge weights for a constant standoff distance. For the study, the slab was analysed using the numerical method by means of nonlinear finite element analysis. The slab was modelled as 3-D structural continuum using LS-DYNA software. For concrete modelling, two constitutive models were selected, namely the KCC and Winfrith concrete models. Blast loads were applied to the slab through the Lagrangian approach, and the blast command available in the software, namely LOAD_BLAST_ENHANCED, was selected for the application. The deflections and damage modes results obtained were compared to those from a previously published experiment. From the study, both the KCC and Winfrith concrete models effectively and satisfactorily estimated the actual slab maximum deflection. For damage modes, the KCC model appeared to be capable to capture satisfactorily the general damage mode including flexural cracks. However, the model could not capture the local shear mode at the middle of slab (spallation) because the Lagrangian approach does not simulate the interaction between the ambient air and the solid slab.

  7. Non-Destructive Detection of Rebar Buried in a Reinforced Concrete Wall with Wireless Passive SAW Sensor

    NASA Astrophysics Data System (ADS)

    Fan, Yanping; Ji, Xiaojun; Cai, Ping; Lu, Qianhui

    2013-01-01

    In order to reduce the damage to the old reinforced concrete walls and work out the best construction scheme during the renovation of old buildings, it is often required to detect the position of rebar buried in concrete walls. In this paper, we propose a non-destructive method to detect the buried rebar by self-inductive sensor combined with surface acoustic wave resonator (SAWR). The proposed method has the advantages of wireless, passive and convenient operations. In our new design, the sensing element of self-inductance coil was made as a component of SAWR matching network. The distribution of rebar could be measured according to the system resonant frequency, using a signal demodulation device set. The depth of buried rebar and the deviation of output resonant frequency from inherent frequency of SAWR have an inverse relation. Finally, the validity of the method was verified in theoretical calculation and simulation.

  8. Stress-resultant models for ultimate load design of reinforced concrete frames and multi-scale parameter estimates

    NASA Astrophysics Data System (ADS)

    Pham, B. H.; Brancherie, D.; Davenne, L.; Ibrahimbegovic, A.

    2013-03-01

    In this work, we present a new finite element for (geometrically linear) Timoshenko beam model for ultimate load computation of reinforced concrete frames. The proposed model combines the descriptions of the diffuse plastic failure in the beam-column followed by the creation of plastic hinges due to the failure or collapse of the concrete and of the re-bars. A modified multi-scale analysis is performed in order to identify the parameters for stress-resultant-based macro model, which is used to described the behavior of the Timoshenko beam element. For clarity, we focus upon the micro-scale models using the multi-fiber elements with embedded displacement discontinuities in mode I, which would typically be triggered by bending failure mode. More general case of micro-scale model capable of describing shear failure is described by Ibrahimbegovic et al. (Int J Numer Methods Eng 83(4):452-481, 2010).

  9. Design and installation of a cathodic protection system for a large reinforced concrete intake structure in the Arabian Gulf

    SciTech Connect

    Ali, M.; Al-Ghannam, H.

    1997-09-01

    The paper describes the condition survey methodology, design and installation of a cathodic protection (C.P.) system for a large reinforced concrete reservoir and sea water intake structure. The structure is critical for the supply of cooling water for a 2.4 million metric ton steel plant. The C.P. System consisting of mixed metal oxide coating on titanium mesh type anodes and automatic voltage/current controlled rectifiers was successfully installed and has been operating within design guidelines for the past 15 months.

  10. Effect of confining pressure due to external jacket of steel plate or shape memory alloy wire on bond behavior between concrete and steel reinforcing bars.

    PubMed

    Choi, Eunsoo; Kim, Dongkyun; Park, Kyoungsoo

    2014-12-01

    For external jackets of reinforced concrete columns, shape memory alloy (SMA) wires are easy to install, and they provide active and passive confining pressure; steel plates, on the other hand, only provide passive confining pressure, and their installation on concrete is not convenient because of the requirement of a special device. To investigate how SMA wires distinctly impact bond behavior compared with steel plates, this study conducted push-out bond tests of steel reinforcing bars embedded in concrete confined by SMA wires or steel plates. For this purpose, concrete cylinders were prepared with dimensions of 100 mm x 200 mm, and D-22 reinforcing bars were embedded at the center of the concrete cylinders. External jackets of 1.0 mm and 1.5 mm thickness steel plates were used to wrap the concrete cylinders. Additionally, NiTiNb SMA wire with a diameter of 1.0 mm was wound around the concrete cylinders. Slip of the reinforcing bars due to pushing force was measured by using a displacement transducer, while the circumferential deformation of specimens was obtained by using an extensometer. The circumferential deformation was used to calculate the circumferential strains of the specimens. This study assessed the radial confining pressure due to the external jackets on the reinforcing bars at bond strength from bond stress-slip curves and bond stress-circumferential strain curves. Then, the effects of the radial confining pressure on the bond behavior of concrete are investigated, and an equation is suggested to estimate bond strength using the radial confining pressure. Finally, this study focused on how active confining pressure due to recovery stress of the SMA wires influences bond behavior.

  11. Response of reinforced concrete and corrugated steel pipes to surface load

    NASA Astrophysics Data System (ADS)

    Lay, Geoff R.

    Full-scale simulated live load tests were conducted in a controlled laboratory setting using a single-axle frame on 600-mm-inner-diameter reinforced concrete pipe (RCP) and corrugated steel pipe (CSP) when buried in dense, well-graded sand and gravel. Measurements of the RCP at nominal and working forces and beyond are reported for 0.3, 0.6 and 0.9 m of soil cover above the pipe crown. The RCP experienced no cracking when buried at 0.3 m under nominal and working CL-625 and CL-800 single-axle design loads. At these loads, the vertical contraction of the pipe diameter was less than 0.08 and 0.10 mm and the largest tensile strains in the pipe were 75 and 100 muepsilon (50-60% of the cracking strain), respectively. A 0.15 (+/-0.05)-mm-wide axial crack developed at the inner crown in the presence of a 6 kNm/m circumferential bending moment (70% of the theoretical ultimate moment capacity) at the fully factored CL-625 load. This crack did not propagate or widen from 3 series of cyclic load-unload tests. At 1300 kN of applied load the change in pipe diameter was less than 3.5 mm. Increasing soil cover from 0.3 to 0.6 to 0.9 m reduced the circumferential crown bending moment from 6.0 to 3.9 to 2.1 kNm/m, respectively, at 400 kN of axle load. A 1.6- and a 2.8-mm-thick CSP were also subjected to axle loading. No yielding or limit states occurred in the 1.6-mm-thick CSP when buried 0.9-m-deep. However, at 0.6 m of cover a 300 kN axle load caused local yielding at the pipe crown. Increasing soil cover from 0.6 to 0.9 m decreased the vertical diameter change from -3.0 to -1.2 mm and the crown bending moment from 0.7 to 0.2 kNm/m (75% and 20% of the yield moment), respectively, at a 250 kN axle load. Deflections of the thicker CSP were less than the thinner pipe below the CL-625 single-axle load, however further increases in applied load produced a greater response in the thicker pipe, likely due to a haunch support issue. Shallow axle loading produced a greater 3-dimensional

  12. Performance-based plastic design of earthquake resistant reinforced concrete moment frames

    NASA Astrophysics Data System (ADS)

    Liao, Wen-Cheng

    Performance-Based Plastic Design (PBPD) method has been recently developed to achieve enhanced performance of earthquake resistant structures. The design concept uses pre-selected target drift and yield mechanism as performance criteria. The design base shear for selected hazard level is determined by equating the work needed to push the structure monotonically up to the target drift to the corresponding energy demand of an equivalent SDOF oscillator. This study presents development of the PBPD approach as applied to reinforced concrete special moment frame (RC SMF) structures. RC structures present special challenge because of their complex and degrading ("pinched") hysteretic behavior. In order to account for the degrading hysteretic behavior the 1-EMA 440 C2 factor approach was used in the process of determining the design base shear. Four baseline RC SMF (4, 8, 12 and 20-story) as used in the FEMA P695 were selected for this study. Those frames were redesigned by the PBPD approach. The baseline frames and the PBPD frames were subjected to extensive inelastic pushover and time-history analyses. The PBPD frames showed much improved response meeting all desired performance objectives, including the intended yield mechanisms and the target drifts. On the contrary, the baseline frames experienced large story drifts due to flexural yielding of the columns. The work-energy equation to determine design base shear can also be used to estimate seismic demands, called the energy spectrum method. In this approach the skeleton force-displacement (capacity) curve of the structure is converted into energy-displacement plot (Ec) which is superimposed over the corresponding energy demand plot ( Ed) for the specified hazard level to determine the expected peak displacement demands. In summary, this study shows that the PBPD approach can be successfully applied to RC moment frame structures as well, and that the responses of the example moment frames were much improved over those

  13. Structural resistance of reinforced concrete buildings under pyroclastic flows: a study of the Vesuvian area

    NASA Astrophysics Data System (ADS)

    Petrazzuoli, S. M.; Zuccaro, G.

    2004-05-01

    The analysis of the effects of pyroclastic flows on humans and on buildings represents the main tool to define the boundary of the most hazardous area around an active volcano such as Somma-Vesuvius. Estimation of the lateral pressure on buildings derived from analogies with the damages observed after a nuclear explosion [Valentine (1998) J. Volcanol. Geotherm. Res. 87, 117-140] lead to pressure values and/or structural resistance which are not realistic (too high). Recent evidence [Baxter (2000) Human and Structural Vulnerability Assessment for Emergency Planning in a Future Eruption of Vesuvius. Final Report EC Project ENV4-CT98-0699; Young et al. (1997) EOS, Trans. Am. Geophys. Union, 78, 401] have shown that beyond 2-3 km from the vent, even after a great eruption, resistance to collapse of buildings affected by a pyroclastic flow is still possible. Neri et al. [(2000) Numerical simulation of pyroclastic flows. In: Human and Human and Structural Vulnerability Assessment for Emergency Planning in a Future Eruption of Vesuvius. Final Report EC Project ENV4-CT98-0699], by means of a numerical model of a collapsing column, show that the peak overpressures of the pyroclastic flows range from 1 to 2 kPa at a distance from the vent of about 4-5 km, where important historical centres of the Vesuvian area are located. A detailed analysis of urban settlement of the area [Cherubini et al. (2001) Vulnerabilita' Sismica dell'Area Vesuviana. Gruppo Nazionale per la Difesa dai Terremoti, CNR, Roma] has shown that most of the people live in reinforced concrete (r.c.) structures, not designed to resist horizontal seismic actions. The present work is aimed at analyzing the collapse limit load of r.c. structures to horizontal pressure for different structural design typologies (strong aseismic, weak aseismic, strong non-aseismic, weak non-aseismic). The simulations performed have also taken into account the specific features of the r.c. structures of the area (local building

  14. Detection of sulfur in the reinforced concrete structures using a dual pulsed LIBS system

    NASA Astrophysics Data System (ADS)

    Gondal, M. A.; Dastageer, A.; Maslehuddin, M.; Alnehmi, A. J.; Al-Amoudi, O. S. B.

    2012-04-01

    In concrete structures, an excessive amount of sulfate ions can cause severe damage to the strength and the stability of the building structures and hence a sensitive and reliable technique for sulfate ion detection in concrete is highly desirable. Laser-induced breakdown spectroscopy (LIBS) is one of the most reliable and sensitive techniques to identify the presence of potentially dangerous sulfur in the concrete structure. The atomic emission lines of sulfur lying in the 200-900 nm region are mostly singly ionized states and hence inherently very weak. In order to enhance the sensitivity of the conventional LIBS system, we employed a dual pulsed LIBS system for detection of weak spectral line of sulfur in concrete using the S II peak at 545.38 nm as a marker for quantifying sulfur content in the concrete. The 1064 nm fundamental and 266 nm fourth harmonic of the Nd:YAG laser in conjunction with Spectrograph/gated ICCD camera are the core factors in improvement of sensitivity. Furthermore, the dual pulsed LIBS system and the fine maneuvering of the gate parameters and interpulse delay yielded improvement in the sensitivity, and resulted in a systematic correlation of the LIBS signal with the concentration of sulfur in the concrete sample. In order to quantify the sulfur content in concrete, a calibration curve was also drawn by recording the LIBS spectra of sample having sulfur in various concentrations. The limit of detection achieved with our dual pulsed LIBS system is approximately 38 μg/g.

  15. The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic Sensor.

    PubMed

    Zhang, Hong; Liao, Leng; Zhao, Ruiqiang; Zhou, Jianting; Yang, Mao; Xia, Runchuan

    2016-09-06

    This paper presents a non-destructive test method for steel corrosion in reinforced concrete bridges by using a 3-dimensional digital micro-magnetic sensor to detect and analyze the self-magnetic field leakage from corroded reinforced concrete. The setup of the magnetic scanning device and the measurement mode of the micro-magnetic sensor are introduced. The numerical analysis model is also built based on the linear magnetic charge theory. Compared to the self-magnetic field leakage data obtained from magnetic sensor-based measurement and numerical calculation, it is shown that the curves of tangential magnetic field at different lift-off height all intersect near the edge of the steel corrosion zone. The result indicates that the intersection of magnetic field curves can be used to detect and evaluate the range of the inner steel corrosion in engineering structures. The findings of this work propose a new and effective non-destructive test method for steel corrosion, and therefore enlarge the application of the micro-magnetic sensor.

  16. Infilled masonry walls contribution in mitigating progressive collapse of multistory reinforced concrete structures according to UFC guidelines

    NASA Astrophysics Data System (ADS)

    Helmy, Huda; Hadhoud, Hamed; Mourad, Sherif

    2015-09-01

    A structure is subjected to progressive collapse when an element fails, resulting in failure of adjoining structural elements which, in their turn, cause further structural failure leading eventually to partial or total collapse. The failure of a primary vertical support might occur due to extreme loadings such as bomb explosion in a terrorist attack, gas explosion and huge impact of a car in the parking area. Different guidelines such as the General Services Administration (GSA 2003) and the Unified Facilities Criteria (UFC 2009) addressed the structural progressive collapse due to the sudden loss of a main vertical support. In the current study, a progressive collapse assessment according to the UFC guidelines is carried out for a typical ten-story reinforced concrete framed structure designed according to codes [(ACI 318-08) and (ASCE 7-10)] for minimum design loads for buildings and other structures. Fully nonlinear dynamic analysis for the structure was carried out using Applied Element Method (AEM). The investigated cases included the removal of a corner column, an edge column, an edge shear wall, internal columns and internal shear wall. The numerical analysis showed that simplification of the problem into 3D bare frames would lead to uneconomical design. It was found for the studied case that, the infilled masonry walls have a valuable contribution in mitigating progressive collapse of the reinforced concrete framed structures. Neglecting these walls would lead to uneconomical design.

  17. Calculation of reinforced-concrete frame strength under a simultaneous static cross section load and a column lateral impact

    NASA Astrophysics Data System (ADS)

    Belov, Nikolay; Yugov, Nikolay; Kopanitsa, Dmitry; Kopanitsa, Georgy; Yugov, Alexey; Kaparulin, Sergey; Plyaskin, Andrey; Kalichkina, Anna; Ustinov, Artyom

    2016-01-01

    When designing buildings with reinforced concrete that are planned to resist dynamic loads it is necessary to calculate this structural behavior under operational static and emergency impact and blast loads. Calculations of the structures under shock-wave loads can be performed by solving dynamic equations that do not consider static loads. Due to this fact the calculation of reinforced concrete frame under a simultaneous static and dynamic load in full 3d settings becomes a very non trivial and resource consuming problem. This problem can be split into two tasks. The first one is a shock-wave problem that can be solved using software package RANET-3, which allows solving the problem using finite elements method adapted for dynamic task. This method calculates strain-stress state of the material and its dynamic destruction, which is considered as growth and consolidation of micro defects under loading. On the second step the results of the first step are taken as input parameters for quasi static calculation of simultaneous static and dynamic load using finite elements method in AMP Civil Engineering-11.

  18. The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic Sensor

    PubMed Central

    Zhang, Hong; Liao, Leng; Zhao, Ruiqiang; Zhou, Jianting; Yang, Mao; Xia, Runchuan

    2016-01-01

    This paper presents a non-destructive test method for steel corrosion in reinforced concrete bridges by using a 3-dimensional digital micro-magnetic sensor to detect and analyze the self-magnetic field leakage from corroded reinforced concrete. The setup of the magnetic scanning device and the measurement mode of the micro-magnetic sensor are introduced. The numerical analysis model is also built based on the linear magnetic charge theory. Compared to the self-magnetic field leakage data obtained from magnetic sensor-based measurement and numerical calculation, it is shown that the curves of tangential magnetic field at different lift-off height all intersect near the edge of the steel corrosion zone. The result indicates that the intersection of magnetic field curves can be used to detect and evaluate the range of the inner steel corrosion in engineering structures. The findings of this work propose a new and effective non-destructive test method for steel corrosion, and therefore enlarge the application of the micro-magnetic sensor. PMID:27608029

  19. The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic Sensor.

    PubMed

    Zhang, Hong; Liao, Leng; Zhao, Ruiqiang; Zhou, Jianting; Yang, Mao; Xia, Runchuan

    2016-01-01

    This paper presents a non-destructive test method for steel corrosion in reinforced concrete bridges by using a 3-dimensional digital micro-magnetic sensor to detect and analyze the self-magnetic field leakage from corroded reinforced concrete. The setup of the magnetic scanning device and the measurement mode of the micro-magnetic sensor are introduced. The numerical analysis model is also built based on the linear magnetic charge theory. Compared to the self-magnetic field leakage data obtained from magnetic sensor-based measurement and numerical calculation, it is shown that the curves of tangential magnetic field at different lift-off height all intersect near the edge of the steel corrosion zone. The result indicates that the intersection of magnetic field curves can be used to detect and evaluate the range of the inner steel corrosion in engineering structures. The findings of this work propose a new and effective non-destructive test method for steel corrosion, and therefore enlarge the application of the micro-magnetic sensor. PMID:27608029

  20. Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission

    NASA Astrophysics Data System (ADS)

    Zitto, Miguel E.; Piotrkowski, Rosa; Gallego, Antolino; Sagasta, Francisco; Benavent-Climent, Amadeo

    2015-08-01

    The complex Morlet Continuous Wavelet Transform (CWT) was applied to acoustic emission (AE) signals from dynamic tests conducted on a reinforced concrete slab with a shaking table. The steel reinforcement bars did not yield during the tests, but a severe loss of bond between reinforcement bars and surrounding concrete was detected. Comparison of the evolution of the scale position of maximum values of CWT coefficients and the histories of response acceleration obtained in different seismic simulations allowed us to identify the (45-64 kHz) frequency band corresponding to the fracture of concrete. The Cumulative Acoustic Emission Energy (CAE) obtained by reconstructing the AE signals in this scale (frequency) band was compared with the Cumulative Dissipated Energy (CDE) of the tested structure. The CDE is accepted as a good parameter for characterizing the mechanical damage in structures. A reasonably good agreement was found between the normalized histories of CAE and CDE. This made it possible to categorize the cracking of concrete as the main source of damage in the reinforced concrete slab. Conversely, the differences between the CAE and CDE curves observed for high levels of peak acceleration applied to the shaking table can be attributed to the deformation of the steel that formed the columns. The AE coming from the plastic deformation of the steel is not detected by CAE due to the threshold amplitude (45 dB) used in the AE monitoring, but the strain energy dissipated by the steel through plastic deformations is included in the CDE. Further, a study of the evolution of the b-value in the successive seismic simulations revealed that the b-value can capture the inception of severe cracking in the concrete, which the tests described in this study attributed mainly to the loss of bond between reinforcing steel and surrounding concrete.

  1. Nonlinear micromechanics-based finite element analysis of the interfacial behaviour of FRP-strengthened reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Abd El Baky, Hussien

    --slip relation is developed considering the interaction between the interfacial normal and shear stress components along the bonded length. A new approach is proposed to describe the entire tau-s relationship based on three separate models. The first model captures the shear response of an orthotropic FRP laminate. The second model simulates the shear characteristics of an adhesive layer, while the third model represents the shear nonlinearity of a thin layer inside the concrete, referred to as the interfacial layer. The proposed bond--slip model reflects the geometrical and material characteristics of the FRP, concrete, and adhesive layers. Two-dimensional and three-dimensional nonlinear displacement-controlled finite element (FE) models are then developed to investigate the flexural and FRP/concrete interfacial responses of FRP-strengthened reinforced concrete beams. The three-dimensional finite element model is created to accommodate cases of beams having FRP anchorage systems. Discrete interface elements are proposed and used to simulate the FRP/concrete interfacial behaviour before and after cracking. The FE models are capable of simulating the various failure modes, including debonding of the FRP either at the plate end or at intermediate cracks. Particular attention is focused on the effect of crack initiation and propagation on the interfacial behaviour. This study leads to an accurate and refined interpretation of the plate-end and intermediate crack debonding failure mechanisms for FRP-strengthened beams with and without FRP anchorage systems. Finally, the FE models are used to conduct a parametric study to generalize the findings of the FE analysis. The variables under investigation include two material characteristics; namely, the concrete compressive strength and axial stiffness of the FRP laminates as well as three geometric properties; namely, the steel reinforcement ratio, the beam span length and the beam depth. The parametric study is followed by a statistical

  2. Time-to-corrosion of reinforcing steel in concrete slabs. Volume 5. Calcium nitrite admixture or epoxy-coated reinforcing bars as corrosion protection systems. Report for July 1980-December 1982

    SciTech Connect

    Virmani, Y.P.; Clear, K.C.; Pasko, T.J. Jr.

    1983-09-01

    Thirty-one relatively large reinforced concrete slabs were fabricated in 1980 using either non-specification epoxy-coated reinforcing steel or calcium nitrite admixture with black (uncoated) steel. Their performance is compared with uncoated steel in concrete without admixtures. The slabs were placed in two lifts: the bottom lift consisted of a bottom mat of reinforcing steel in chloride-free concrete; and a top lift consisting of the top-mat rebars in concrete contaminated with various quantities of sodium chloride. All the electrical connections between the reinforcing mats were made exterior to the slabs so that the corrosion current flow could be monitored. A worst case type of research design was used by specifying poor quality concrete, nonspecification epoxy-coated rebars, and good electrical coupling between the rebar mats. After curing, the slabs were mounted above ground and exposed to the environment of the Washington, D.C. location. They were periodically subjected to additional chloride exposure while being monitored for about 1 year to determine the corrosion rate. Selected slabs were then demolished to confirm the findings of the nondestructive testing.

  3. Finite element analysis of steel fiber-reinforced concrete (SFRC): validation of experimental tensile capacity of dog-bone specimens

    NASA Astrophysics Data System (ADS)

    Islam, Md. Mashfiqul; Chowdhury, Md. Arman; Sayeed, Md. Abu; Hossain, Elsha Al; Ahmed, Sheikh Saleh; Siddique, Ashfia

    2014-09-01

    Finite element analyses are conducted to model the tensile capacity of steel fiber-reinforced concrete (SFRC). For this purpose dog-bone specimens are casted and tested under direct and uniaxial tension. Two types of aggregates (brick and stone) are used to cast the SFRC and plain concrete. The fiber volume ratio is maintained 1.5 %. Total 8 numbers of dog-bone specimens are made and tested in a 1000-kN capacity digital universal testing machine (UTM). The strain data are gathered employing digital image correlation technique from high-definition images and high-speed video clips. Then, the strain data are synthesized with the load data obtained from the load cell of the UTM. The tensile capacity enhancement is found 182-253 % compared to control specimen to brick SFRC and in case of stone SFRC the enhancement is 157-268 %. Fibers are found to enhance the tensile capacity as well as ductile properties of concrete that ensures to prevent sudden brittle failure. The dog-bone specimens are modeled in the ANSYS 10.0 finite element platform and analyzed to model the tensile capacity of brick and stone SFRC. The SOLID65 element is used to model the SFRC as well as plain concretes by optimizing the Poisson's ratio, modulus of elasticity, tensile strength and stress-strain relationships and also failure pattern as well as failure locations. This research provides information of the tensile capacity enhancement of SFRC made of both brick and stone which will be helpful for the construction industry of Bangladesh to introduce this engineering material in earthquake design. Last of all, the finite element outputs are found to hold good agreement with the experimental tensile capacity which validates the FE modeling.

  4. Galvanic interaction between carbon fiber reinforced plastic (CFRP) composites and steel in chloride contaminated concretes

    SciTech Connect

    Torres-Acosta, A.A.; Sagues, A.A.; Sen, R.

    1998-12-31

    Experiments were performed to determine the possible extent of galvanic corrosion when CFRP and steel are in contact in chloride contaminated concrete. Three concrete environments (water-to-cement (w/c) ratio of 0.41) at relative humidities (RH) of {approx}60%, {approx}80% and {approx}95%, and 14 kg/m{sup 3} chloride were investigated. The CFRP composite potential reached between {minus}180 and {minus}590 mV (vsCSE) when it was in contact with steel at these environments. Results showed significant galvanic action in the 80% RH chloride contaminated concrete (nominal steel current densities as high as 0.3 {micro}A/cm{sup 2}).

  5. PROPOSED PREDICTIVE EQUATION FOR DIAGONAL COMPRESSIVE CAPACITY OF REINFORCED CONCRETE BEAMS

    NASA Astrophysics Data System (ADS)

    Tantipidok, Patarapol; Kobayashi, Chikaharu; Matsumoto, Koji; Watanabe, Ken; Niwa, Junichiro

    The current standard specifications of JSCE fo r the diagonal compressive capacity of RC beams only consider the effect of the compressive strength of conc rete and are not applicable to high strength concrete. This research aims to investigate the effect of vari ous parameters on the diagonal compressive capacity and propose a predictive equation. Twenty five I-beams were tested by three-point bending. The verification of the effects of concrete strength, stirrup ratio and spacing, shear span to effective depth ratio, flange width to web width ratio and effective depth was performed. The diagonal compressive capacity had a linear relationship to stirrup spacing regardless of its diameter. The effect of spacing became more significant with higher concrete strength. Thus, the effect of concrete strength and stirrup spacing was interrelated. On the other hand, there were slight effects of the other parameters on the diagonal compressive capacity. Finally, a simple empirical equation for predicting the diagonal compressive capacity of RC beams was proposed. The proposed equation had an adequate simplicity and can provide an accurate estimation of the diagonal compressive capacity than the existing equations.

  6. Experimental and numerical investigations of higher mode effects on seismic inelastic response of reinforced concrete shear walls

    NASA Astrophysics Data System (ADS)

    Ghorbanirenani, Iman

    This thesis presents two experimental programs together with companion numerical studies that were carried out on reinforced concrete shear walls: static tests and dynamic (shake table) tests. The first series of experiments were monotonic and cyclic quasi-static testing on ductile reinforced concrete shear wall specimens designed and detailed according to the seismic provisions of NBCC 2005 and CSA-A23.3-04 standard. The tests were carried out on full-scale and 1:2.37 reduced scale wall specimens to evaluate the seismic design provisions and similitude law and determine the appropriate scaling factor that could be applied for further studies such as dynamic tests. The second series of experiments were shake table tests conducted on two identical 1:2.33 scaled, 8-storey moderately ductile reinforced concrete shear wall specimens to investigate the effects of higher modes on the inelastic response of slender walls under high frequency ground motions expected in Eastern North America. The walls were designed and detailed according to the seismic provisions of NBCC 2005 and CSA-A23.3-04 standard. The objectives were to validate and understand the inelastic response and interaction of shear, flexure and axial loads in plastic hinge zones of the walls considering the higher mode effects and to investigate the formation of second hinge in upper part of the wall due to higher mode responses. Second mode response significantly affected the response of the walls. This caused inelastic flexural response to develop at the 6th level with approximately the same rotation ductility compared to that observed at the base. Dynamic amplification of the base shear forces was also observed in both walls. Numerical modeling of these two shake table tests was performed to evaluate the test results and validate current modeling approaches. Nonlinear time history analyses were carried out by the reinforced concrete fibre element (OpenSees program) and finite element (VecTor2 program

  7. Round-robin pretest analyses of a 1:6-scale reinforced concrete containment model subject to static internal pressurization

    SciTech Connect

    Clauss, D.B.

    1987-05-01

    Analyses of a 1:6-scale reinforced concrete containment model that will be tested to failure at Sandia National Laboratories in the spring of 1987 were conducted by the following organizations in the United States and Europe: Sandia National Laboratories (USA), Argonne National Laboratory (USA), Electric Power Research Institute (USA), Commissariat a L'Energie Atomique (France), HM Nuclear Installations Inspectorate (UK), Comitato Nazionale per la ricerca e per lo sviluppo dell'Energia Nucleare e delle Energie Alternative (Italy), UK Atomic Energy Authority, Safety and Reliability Directorate (UK), Gesellschaft fuer Reaktorsicherheit (FRG), Brookhaven National Laboratory (USA), and Central Electricity Generating Board (UK). Each organization was supplied with a standard information package, which included construction drawings and actual material properties for most of the materials used in the model. Each organization worked independently using their own analytical methods. This report includes descriptions of the various analytical approaches and pretest predictions submitted by each organization. Significant milestones that occur with increasing pressure, such as damage to the concrete (cracking and crushing) and yielding of the steel components, and the failure pressure (capacity) and failure mechanism are described. Analytical predictions for pressure histories of strain in the liner and rebar and displacements are compared at locations where experimental results will be available after the test. Thus, these predictions can be compared to one another and to experimental results after the test.

  8. Improvement of reinforced concrete properties based on modified starch/polybutadiene nanocomposites.

    PubMed

    Saboktakin, Amin; Saboktakin, Mohammad Reza

    2014-09-01

    A novel polymer-modified cement concrete with carboxymethyl starch (CMS) and 1,4-cis polybutadiene (PBD) system by mixing polymer dispersions or redispersible polymer powders with the fresh mixture have been examined. In this paper, the addition of CMS-PBD powders in an aqueous solution is studied. Polymeric molecules are supplied on a molecular scale, improving the approach of the relatively large cement grains by the polymers. The chemical and mechanical properties of CMS-PBD-modified cement concrete have been studied. The additions of very small amounts of CMS-PBD polymeric system results in an improvement of the durability and the adhesion strength of the cementitious materials, which makes them appropriate as repair materials. PMID:25036606

  9. Improvement of reinforced concrete properties based on modified starch/polybutadiene nanocomposites.

    PubMed

    Saboktakin, Amin; Saboktakin, Mohammad Reza

    2014-09-01

    A novel polymer-modified cement concrete with carboxymethyl starch (CMS) and 1,4-cis polybutadiene (PBD) system by mixing polymer dispersions or redispersible polymer powders with the fresh mixture have been examined. In this paper, the addition of CMS-PBD powders in an aqueous solution is studied. Polymeric molecules are supplied on a molecular scale, improving the approach of the relatively large cement grains by the polymers. The chemical and mechanical properties of CMS-PBD-modified cement concrete have been studied. The additions of very small amounts of CMS-PBD polymeric system results in an improvement of the durability and the adhesion strength of the cementitious materials, which makes them appropriate as repair materials.

  10. 78 FR 43858 - Steel Concrete Reinforcing Bars From Belarus, Indonesia, Latvia, Moldova, Poland, the People's...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-22

    ... Korea and Ukraine, 66 FR 46777 (September 7, 2001). On August 9, 2007, the Department revoked the..., Poland, and Ukraine, 78 FR 41079 (July 9, 2013). Scope of the Orders The product covered by the orders is... Reinforcing Bars from South Korea: Revocation of Antidumping Duty Order, 72 FR 44830 (August 9, 2007)....

  11. A unified bond theory, probabilistic meso-scale modeling, and experimental validation of deformed steel rebar in normal strength concrete

    NASA Astrophysics Data System (ADS)

    Wu, Chenglin

    Bond between deformed rebar and concrete is affected by rebar deformation pattern, concrete properties, concrete confinement, and rebar-concrete interfacial properties. Two distinct groups of bond models were traditionally developed based on the dominant effects of concrete splitting and near-interface shear-off failures. Their accuracy highly depended upon the test data sets selected in analysis and calibration. In this study, a unified bond model is proposed and developed based on an analogy to the indentation problem around the rib front of deformed rebar. This mechanics-based model can take into account the combined effect of concrete splitting and interface shear-off failures, resulting in average bond strengths for all practical scenarios. To understand the fracture process associated with bond failure, a probabilistic meso-scale model of concrete is proposed and its sensitivity to interface and confinement strengths are investigated. Both the mechanical and finite element models are validated with the available test data sets and are superior to existing models in prediction of average bond strength (< 6% error) and crack spacing (< 6% error). The validated bond model is applied to derive various interrelations among concrete crushing, concrete splitting, interfacial behavior, and the rib spacing-to-height ratio of deformed rebar. It can accurately predict the transition of failure modes from concrete splitting to rebar pullout and predict the effect of rebar surface characteristics as the rib spacing-to-height ratio increases. Based on the unified theory, a global bond model is proposed and developed by introducing bond-slip laws, and validated with testing of concrete beams with spliced reinforcement, achieving a load capacity prediction error of less than 26%. The optimal rebar parameters and concrete cover in structural designs can be derived from this study.

  12. Zinc/hydrogel system for cathodic protection of reinforced concrete structures

    SciTech Connect

    Bennett, J.; Firlotte, C.

    1997-03-01

    Zinc, aluminum, and several aluminum alloys were tested as anodes in contact with hydrogel adhesives. Zinc was found to offer the best combination of working potential, resistance to passivation, cost, and availability. Several hydrogels used for medical applications were found to be inadequate for this use, but a hydrogel adhesive was developed specifically to bond sacrificial anodes to concrete. This hydrogel achieve a total charge in accelerated testing equal to 12 years of life at current densities normally used for cathodic protection (CP).

  13. Specification of the process of chloride extraction from reinforced concrete based on the inverse task of the diffusion equation

    NASA Astrophysics Data System (ADS)

    Alsabry, A.; Zybura, A.

    2016-05-01

    When the structure of reinforcement is in danger of chloride corrosion it is possible to prevent this disadvantageous phenomenon through exposing the cover to the influence of an electric field. The forces of an electric field considerably reduce chloride ions in pore liquid in concrete, which helps to rebuild a passive layer on the surface of the reinforcement and stops corrosion. The process of removing chlorides can be described with multi-component diffusion equations. However, an essential parameter of these equations, the diffusion coefficient, can be determined on the basis of an inverse task. Since the solution was achieved for one-dimension flow, the method applied can be confirmed by experimental results and the material parameters of the process can be determined theoretically. Some examples of numerical calculations of the effective electro-diffusion coefficient of chloride ions confirmed the usefulness of the theoretical solution for generalizing experimental results. Moreover, the calculation process of the numerical example provides some practical clues for future experimental research, which could be carried out in close connection with the theoretical solution.

  14. Numerical simulation of tests for the evaluation of the performance of the reinforced concrete slabs strengthening by FRCM

    NASA Astrophysics Data System (ADS)

    Anania, Laura; Badalá, Antonio; D'Agata, Giuseppe

    2016-01-01

    In this work the attention is focused to the numerical simulation of the experimental bending tests carried out on a total of six reinforced concrete r.c. plates the latter aimed to provide a basic understanding of the its performance when strengthened by Fiber Reinforced Cementitius Matrix (FRCM) Composites. Three of those were used as control specimens. The numerical simulation was carried out by LUSAS software. A good correlation between the FE results and data obtained from the test, both in the load-deformation behavior and the failure load was highlighted. This permits to prove that applied strengthening system gives back an enhancement 2.5 times greater in respect of the unreinforced case. A greater energy dissipation ability and a residual load-bearing capacity makes the proposed system very useful in the retrofitting as well as in the case of strengthening of bridge structures. Based on the validation of the FE results in bending, the numerical analysis was also extended to characterize the behavior of this strengthening system in tensile.

  15. Microscopic study of surface degradation of glass fiber-reinforced polymer rods embedded in concrete castings subjected to environmental conditioning

    SciTech Connect

    Bank, L.C.; Puterman, M.

    1997-12-31

    The surface degradation of glass fiber-reinforced polymer (GFRP) pultruded rods when embedded in concrete castings and subjected to environmental conditioning is discussed in this paper. Investigation of the degradation of the GFRP rods were performed using optical microscopy and scanning electron microscopy (SEM). Unidirectionally reinforced pultruded rods (6.3- and 12.7-mm diameters) containing E-glass fibers in polyester and vinylester matrices were conditioned at standard laboratory conditions (21 C, 65% relative humidity) or submerged in aqueous solutions (tap water) at 80 C for durations of 14 and 84 days. Observations of the surfaces and cross-sections of the rods by optical microscopy and SEM revealed a variety of degradation phenomena. Embedded hygrothermally conditioned rods were found to have developed surface blisters of different sizes and depths. SEM studies of the surface revealed degradation of the polymer matrix material and exposure and degradation of the fibers close to the surface of the rods. The rods with the vinylester resin matrix showed less extensive degradation than those with the polyester resin matrix; however, the degradation characteristics of the two types of rods appear to be similar.

  16. The long term effects of cathodic protection on corroding, pre-stressed concrete structures: Hydrogen embrittlement of the reinforcing steel

    NASA Astrophysics Data System (ADS)

    Enos, David George

    Assessment of the effect of cathodic protection on a chloride contaminated bridge pile involves the definition of the hydrogen embrittlement behavior of the pearlitic reinforcement combined with quantification of the local (i.e., at the steel/concrete interface) chemical and electrochemical conditions, both prior to and throughout the application of cathodic protection. The hydrogen embrittlement behavior of the reinforcement was assessed through a combination of Devanathan/Stachurski permeation experiments to quantify subsurface hydrogen concentrations, CsbH, as a function of the applied hydrogen overpotential, eta, and crack initiation tests for bluntly notched and fatigue pre-cracked tensile specimens employing elastic-plastic finite element analysis and linear elastic fracture mechanics, respectively. A threshold mobile lattice hydrogen concentration for embrittlement of 2×10sp{-7} mol/cmsp3 was established for bluntly notched and fatigue pre-cracked specimens. Crack initiation occurred by the formation of shear cracks oriented at an angle approaching 45sp° from the tensile axis, as proposed by Miller and Smith (Miller, 1970), in regions where both the longitudinal and shear stresses were maximized (i.e., near the notch root). These Miller cracks then triggered longitudinal splitting which continued until fast fracture of the remaining ligament occurred. Instrumented laboratory scale piles were constructed and partially immersed in ASTM artificial ocean water. With time, localized corrosion (crevicing) was initiated along the reinforcement, and was accompanied by an acidic shift in the pH of the occluded environment due to ferrous ion hydrolysis. Cathodic protection current densities from -0.1 muA/cmsp2 to -3.0 muA/cmsp2 were applied via a skirt anode located at the waterline. Current densities as low as 0.66 muA/cmsp2 were sufficient to deplete the dissolved oxygen concentration at the steel/concrete interface and result in the observance of hydrogen

  17. Earthquake Resilient Tall Reinforced Concrete Buildings at Near-Fault Sites Using Base Isolation and Rocking Core Walls

    NASA Astrophysics Data System (ADS)

    Calugaru, Vladimir

    This dissertation pursues three main objectives: (1) to investigate the seismic response of tall reinforced concrete core wall buildings, designed following current building codes, subjected to pulse type near-fault ground motion, with special focus on the relation between the characteristics of the ground motion and the higher-modes of response; (2) to determine the characteristics of a base isolation system that results in nominally elastic response of the superstructure of a tall reinforced concrete core wall building at the maximum considered earthquake level of shaking; and (3) to demonstrate that the seismic performance, cost, and constructability of a base-isolated tall reinforced concrete core wall building can be significantly improved by incorporating a rocking core-wall in the design. First, this dissertation investigates the seismic response of tall cantilever wall buildings subjected to pulse type ground motion, with special focus on the relation between the characteristics of ground motion and the higher-modes of response. Buildings 10, 20, and 40 stories high were designed such that inelastic deformation was concentrated at a single flexural plastic hinge at their base. Using nonlinear response history analysis, the buildings were subjected to near-fault seismic ground motions as well as simple close-form pulses, which represented distinct pulses within the ground motions. Euler-Bernoulli beam models with lumped mass and lumped plasticity were used to model the buildings. Next, this dissertation investigates numerically the seismic response of six seismically base-isolated (BI) 20-story reinforced concrete buildings and compares their response to that of a fixed-base (FB) building with a similar structural system above ground. Located in Berkeley, California, 2 km from the Hayward fault, the buildings are designed with a core wall that provides most of the lateral force resistance above ground. For the BI buildings, the following are investigated

  18. Corrosion resistance of enamel coating modified by calcium silicate and sand particle for steel reinforcement in concrete

    NASA Astrophysics Data System (ADS)

    Tang, Fujian

    Porcelain enamel has stable chemical property in harsh environments such as high temperature, acid and alkaline, and it can also chemically react with substrate reinforcing steel resulting in improved adherence strength. In this study, the corrosion resistances of enamel coating modified by calcium silicate and sand particles, which are designed for improved bond strength with surrounding concrete, were investigated in 3.5 wt% NaCl solution. It consists of two papers that describe the results of the study. The first paper investigates the corrosion behavior of enamel coating modified by calcium silicate applied to reinforcing steel bar in 3.5 wt% NaCl solution by OCP, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The coatings include a pure enamel, a mixed enamel that consists of 50% pure enamel and 50% calcium silicate by weight, and a double enamel that has an inner pure enamel layer and an outer mixed enamel layer. Electrochemical tests demonstrates that both pure and double enamel coatings can significantly improve corrosion resistance, while the mixed enamel coating offers very little protection due to connected channels. The second paper is focused on the electrochemical characteristics of enamel coating modified by sand particle applied to reinforcing steel bar in 3.5 wt% NaCl solution by EIS. Six percentages by weight are considered including 5%, 10%, 20%, 30%, 50%, and 70%. Results reveal that addition of sand particle does not affect its corrosion resistance significantly. Most of the sand particles can wet very well with enamel body, while some have a weak zone which is induced during the cooling stage due to different coefficient of thermal expansion. Therefore, quality control of sand particle is the key factor to improve its corrosion resistance.

  19. 2D and 3D Ground Penetrating Radar monitoring of a reinforced concrete asphalt plate affected by mechanical deformation.

    NASA Astrophysics Data System (ADS)

    Bavusi, M.; Dumoulin, J.; Loperte, A.; Rizzo, E.; Soldovieri, F.

    2012-04-01

    The main facility of Hydrogeosite Laboratory of the Italian National Research Council (Marsico Nuovo, CNR) is a 3m x 7m x 10m reinforced concrete pool filled by siliceous sand designed for hydrologic experiments. One of its peculiarities is the possibility to vary the water table depth by using a proper hydraulic system [1]. In the framework of the FP7 ISTIMES project (Integrated System for Transport Infrastructure surveillance and Monitoring by Electromagnetic Sensing), a 3m x 3m layered structure has been purposely built and placed in the pool of the Hydrogeosite Laboratory with the aim to carry out a long term monitoring, by using jointly several electromagnetic sensing technologies, during two different phases simulating the rising of the water table and a mechanical solicitation. Several layers composed the structure from the top to the bottom, such as: 5 cm of asphalt; 5-10 cm of reinforced concrete; 20-25 cm of conglomerate, 55 cm of sand. Moreover, in the sand layer, three (metallic and plastic) pipes of different size were buried to simulate utilities. Ground Penetrating Radar (GPR) surveys were performed by using a the GSSI SIR 3000 system equipped with 400 MHz and 1500 MHz central frequency antennas. Surveys carried out by means of 400 MHz antenna allowed to detect and localize the three pipes (one in plastic and two in metal) and to investigate the effects of the sand water content on their radar signature. Surveys carried out by using 1500 MHz antenna were focused to characterize the shallower layers of the structure. The Hydrogeosite experiment consisted in following stages: • Arising of a water table by infiltration from the bottom; • Water gravity infiltration condescendingly; • Infiltration by peristaltic pump in the very shallow layers of the structure; • Water table drawdown; • Mechanical structure deformation; • Asphalt plate restoration after mechanical solicitation. After each stage a series of GPR surveys was performed. Moreover

  20. Ribbed electrode substrates

    DOEpatents

    Breault, Richard D.; Goller, Glen J.

    1983-01-01

    A ribbed substrate for an electrochemical cell electrode is made from a mixture of carbon fibers and carbonizable resin and has a mean pore size in the ribs which is 60-75% of the mean pore size of the web portions of the substrate which interconnect the ribs. Preferably the mean pore size of the web portion is 25-45 microns; and, if the substrate includes edge seals parallel to the ribs, the edge seals preferably have a mean pore size no greater than about ten microns. Most preferably the substrate has the same ratio of carbon fibers to polymeric carbon in all areas, including the ribs, webs, and edge seals. A substrate according to the present invention will have better overall performance than prior art substrates and minimizes the substrate thickness required for the substrate to perform all its functions well.

  1. The Effect of Shear Wall Distribution on the Dynamics of Reinforced Concrete Structures

    SciTech Connect

    Helou, S. H.; Touqan, A. R.

    2008-07-08

    The inclusion of a soft storey in multistory concrete buildings is a feature gaining popularity in urban areas where land is of exorbitant cost. In earthquake prone zones, this feature has been observed in post earthquake investigations. Although engineers are prepared to accept the notion that a soft storey poses a weak link in Seismic Design, yet the idea demands better understanding. The following study illustrates the importance of the judicious distribution of shear walls. The selected building is analyzed through nine numerical models which address the behavior of framed structures. The parameters discussed include, inter alias, the fundamental period of vibration, lateral displacements, axial and shear forces. It is noticed that an abrupt change in stiffness between the soft storey and the level above is responsible for increasing the strength demand on first storey columns. Extending the elevator shafts throughout the soft storey is strongly recommended.

  2. Analysis Techniques of Acoustic Emission Data for Damage Assessment of Reinforced Concrete Structures

    NASA Astrophysics Data System (ADS)

    Garilli, G.; Proverbio, E.; Marino, A.; de Domenico, D.; Termini, D.; Teramo, A.

    2010-12-01

    The aim of this work is the arrangement, through Acoustics Emission (AE) techniques, of a procedure aimed at early diagnosis of building diseases with the assessment of the causes that have produced a crack in a given structural element, in order to plan suitable structural adjustment works. To this end, bending tests were performed, divided into different cycles of increasing load on a concrete beam, to assess the damage level and response in relation to the stress change. Through the proposed procedure and different indicators of the damage level of material, such as b, Ib and Z-value, it was possible to identify in the study sample areas where cracks were detected, assessing the size, evolution process typology of microcraks. The recorded parameters of AE (Counts, Amplitude) are well related to the damage extent and applied load, providing a significant validation of the reliability analysis procedures used for monitoring and early detection of building diseases.

  3. Assessment of high performance concrete containing fly ash and calcium nitrite based corrosion inhibitor as a mean to prevent the corrosion of reinforcing steel

    NASA Astrophysics Data System (ADS)

    Montes-García, P.; Jiménez-Quero, V.; López-Calvo, H.

    2015-01-01

    This research analyses the effectiveness of the water-to-cement ratio (w/c), fly ash and a calcium nitrite based corrosion inhibitor to prevent the corrosion of reinforcing steel embedded in high performance concrete. The interactive effect between the inhibitor and fly ash was evaluated because the occurrence of a negative effect when both ingredients are added together in a concrete mixture has been reported. All the concrete mixtures studied in this investigation had 8.2% of silica fume. Twenty seven prismatic concrete specimens were fabricated with dimensions of 55 × 230 × 300 mm each containing two steel rods embedded for the purpose of corrosion monitoring. The specimens were exposed to a simulated marine environment with two daily cycles of wetting and drying for one year. To evaluate the deterioration of the specimens corrosion potentials and linear polarization resistance tests were carried out. The results indicate that the use of a low w/c, the addition of fly ash and the addition of the corrosion inhibitor contributed to the reduction of the corrosion of steel in the concrete specimens. The results further suggest that the combination of fly ash and corrosion inhibitor does not promote the deterioration of the concrete matrix.

  4. Reliability-based design optimization of reinforced concrete structures including soil-structure interaction using a discrete gravitational search algorithm and a proposed metamodel

    NASA Astrophysics Data System (ADS)

    Khatibinia, M.; Salajegheh, E.; Salajegheh, J.; Fadaee, M. J.

    2013-10-01

    A new discrete gravitational search algorithm (DGSA) and a metamodelling framework are introduced for reliability-based design optimization (RBDO) of reinforced concrete structures. The RBDO of structures with soil-structure interaction (SSI) effects is investigated in accordance with performance-based design. The proposed DGSA is based on the standard gravitational search algorithm (GSA) to optimize the structural cost under deterministic and probabilistic constraints. The Monte-Carlo simulation (MCS) method is considered as the most reliable method for estimating the probabilities of reliability. In order to reduce the computational time of MCS, the proposed metamodelling framework is employed to predict the responses of the SSI system in the RBDO procedure. The metamodel consists of a weighted least squares support vector machine (WLS-SVM) and a wavelet kernel function, which is called WWLS-SVM. Numerical results demonstrate the efficiency and computational advantages of DGSA and the proposed metamodel for RBDO of reinforced concrete structures.

  5. Impact of structural aging on seismic risk assessment of reinforced concrete structures in nuclear power plants

    SciTech Connect

    Ellingwood, B.; Song, J.

    1996-03-01

    The Structural Aging Program is addressing the potential for degradation of concrete structural components and systems in nuclear power plants over time due to aging and aggressive environmental stressors. Structures are passive under normal operating conditions but play a key role in mitigating design-basis events, particularly those arising from external challenges such as earthquakes, extreme winds, fires and floods. Structures are plant-specific and unique, often are difficult to inspect, and are virtually impossible to replace. The importance of structural failures in accident mitigation is amplified because such failures may lead to common-cause failures of other components. Structural condition assessment and service life prediction must focus on a few critical components and systems within the plant. Components and systems that are dominant contributors to risk and that require particular attention can be identified through the mathematical formalism of a probabilistic risk assessment, or PRA. To illustrate, the role of structural degradation due to aging on plant risk is examined through the framework of a Level 1 seismic PRA of a nuclear power plant. Plausible mechanisms of structural degradation are found to increase the core damage probability by approximately a factor of two.

  6. Distributed strain measurement of a large-scale reinforced concrete beam-column assembly under cyclic loading

    NASA Astrophysics Data System (ADS)

    Chen, Genda; Xu, Bin; McDaniel, Ryan D.; Ying, Xiaofei; Pommerenke, David J.; Wu, Zhishen

    2005-05-01

    In this paper, comparisons are made between the performances of two kinds of distributed sensors, Electric Time Domain Reflectometry (ETDR) cable sensor that is based on the propagation of electromagnetic waves in an electrical cable and Brillouin Optical Time Domain Reflectometry (BOTDR) optical sensor that is based on the propagation of optic pulses and Brillouin scattering that occurs when light is transmitted through the optic fiber. A cable sensor was mounted near the surface of the 80% scale beam-column reinforced concrete assembly that was loaded cyclically until the shear failure occurred. The embedded depth was 0.5 inches. At the same time, a fiber optic sensor was mounted on the surface of the assembly with two installation procedures called Point Fixation (PF) Method and Overall Bonding (OB) Method to measure the strain distribution. Both BOTDR and ETDR sensors were subjected to tension and compression in one loading cycle. Strain distributions obtained from the ETDR and BOTDR sensing systems under different cycle loadings were compared with each other. They were also compared with those measured from the traditional strain gauge.

  7. Study on the effect of the infill walls on the seismic performance of a reinforced concrete frame

    NASA Astrophysics Data System (ADS)

    Zhang, Cuiqiang; Zhou, Ying; Zhou, Deyuan; Lu, Xilin

    2011-12-01

    Motivated by the seismic damage observed to reinforced concrete (RC) frame structures during the Wenchuan earthquake, the effect of infill walls on the seismic performance of a RC frame is studied in this paper. Infill walls, especially those made of masonry, offer some amount of stiffness and strength. Therefore, the effect of infill walls should be considered during the design of RC frames. In this study, an analysis of the recorded ground motion in the Wenchuan earthquake is performed. Then, a numerical model is developed to simulate the infill walls. Finally, nonlinear dynamic analysis is carried out on a RC frame with and without infill walls, respectively, by using CANNY software. Through a comparative analysis, the following conclusions can be drawn. The failure mode of the frame with infill walls is in accordance with the seismic damage failure pattern, which is strong beam and weak column mode. This indicates that the infill walls change the failure pattern of the frame, and it is necessary to consider them in the seismic design of the RC frame. The numerical model presented in this paper can effectively simulate the effect of infill walls on the RC frame.

  8. Effects of Cylindrical Charge Geometry and Secondary Combustion Reactions on the Internal Blast Loading of Reinforced Concrete Structures

    SciTech Connect

    Price, Matthew A.

    2005-05-01

    An understanding of the detonation phenomenon and airblast behavior for cylindrical high-explosive charges is essential in developing predictive capabilities for tests and scenarios involving these charge geometries. Internal tests on reinforced concrete structures allowed for the analysis of cylindrical charges and the effect of secondary reactions occurring in confined structures. The pressure profiles that occur close to a cylindrical explosive charge are strongly dependent on the length-to-diameter ratio (L/D) of the charge. This study presents a comparison of finite-element code models (i.e., AUTODYN) to empirical methods for predicting airblast behavior from cylindrical charges. Current finite element analysis (FEA) and blast prediction codes fail to account for the effects of secondary reactions (fireballs) that occur with underoxidized explosives. Theoretical models were developed for TNT and validated against literature. These models were then applied to PBX 9501 for predictions of the spherical fireball diameter and time duration. The following relationships for PBX 9501 were derived from this analysis (units of ft, lb, s). Comparison of centrally located equivalent weight charges using cylindrical and spherical geometries showed that the average impulse on the interior of the structure is ~3%–5% higher for the spherical charge. Circular regions of high impulse that occur along the axial direction of the cylindrical charge must be considered when analyzing structural response.

  9. Governing equations of multi-component rigid body-spring discrete element models of reinforced concrete columns

    NASA Astrophysics Data System (ADS)

    Guan, P. B.; Tingatinga, E. A.; Longalong, R. E.; Saguid, J.

    2016-09-01

    During the past decades, the complexity of conventional methods to perform seismic performance assessment of buildings led to the development of more effective approaches. The rigid body spring-discrete element method (RBS-DEM) is one of these approaches and has recently been applied to the study of the behavior of reinforced concrete (RC) buildings subjected to strong earthquakes. In this paper, the governing equations of RBS-DEM planar elements subjected to lateral loads and horizontal ground motion are presented and used to replicate the hysteretic behavior of experimental RC columns. The RBS-DEM models of columns are made up of rigid components connected by systems of springs that simulate axial, shear, and bending behavior of an RC section. The parameters of springs were obtained using Response-2000 software and the hysteretic response of the models of select columns from the Pacific Earthquake Engineering Research (PEER) Structural Performance Database were computed numerically. Numerical examples show that one-component models were able to simulate the initial stiffness reasonably, while the displacement capacity of actual columns undergoing large displacements were underestimated.

  10. Optimal seismic design of reinforced concrete structures under time-history earthquake loads using an intelligent hybrid algorithm

    NASA Astrophysics Data System (ADS)

    Gharehbaghi, Sadjad; Khatibinia, Mohsen

    2015-03-01

    A reliable seismic-resistant design of structures is achieved in accordance with the seismic design codes by designing structures under seven or more pairs of earthquake records. Based on the recommendations of seismic design codes, the average time-history responses (ATHR) of structure is required. This paper focuses on the optimal seismic design of reinforced concrete (RC) structures against ten earthquake records using a hybrid of particle swarm optimization algorithm and an intelligent regression model (IRM). In order to reduce the computational time of optimization procedure due to the computational efforts of time-history analyses, IRM is proposed to accurately predict ATHR of structures. The proposed IRM consists of the combination of the subtractive algorithm (SA), K-means clustering approach and wavelet weighted least squares support vector machine (WWLS-SVM). To predict ATHR of structures, first, the input-output samples of structures are classified by SA and K-means clustering approach. Then, WWLS-SVM is trained with few samples and high accuracy for each cluster. 9- and 18-storey RC frames are designed optimally to illustrate the effectiveness and practicality of the proposed IRM. The numerical results demonstrate the efficiency and computational advantages of IRM for optimal design of structures subjected to time-history earthquake loads.

  11. Performance of continuously reinforced concrete pavements: Volume 6 -- CRC pavement design, construction, and performance. Final report, August 1990--December 1994

    SciTech Connect

    Zollinger, D.G.; Buch, N.; Xin, D.; Soares, J.

    1999-02-01

    This report is one of a series of reports prepared as part of a recent study sponsored by the Federal Highway Administration (FHWA) aimed at updating the state-of-the-art of the design, construction, maintenance, and rehabilitation of continuous reinforced concrete (CRC) pavements. The scope of work of the FHWA study included the following: (1) Conduct of a literature review and preparation of an annotated bibliography on CRC pavements and CRC overlays. (2) Conduct of a field investigation and laboratory testing related to 23 existing in-service pavement sections. This was done to evaluate the effect of various design features on CRC pavement performance, to identify any design or construction related problems, and to recommend procedures to improve CRC pavement technology. (3) Evaluation of the effectiveness of various maintenance and rehabilitation strategies for CRC pavements. (4) Preparation of a Summary Report on the current state of the practice for CRC pavements. Each of the above four items is addressed in a separate report. The following reports have been prepared under this study: Performance of CRC Pavements. Volume 1: Summary of Practice and Annotated Bibliography. Volume 2: Field Investigation of CRC Pavements. Volume 3: Analysis and Evaluation of Field Test Data. Volume 4: Resurfacing for CRC Pavements. Volume 5: Maintenance and Repair of CRC Pavements. Volume 6: CRC Pavement Design, Construction, and Performance. Volume 7: Summary. This report is Volume 6 in the series.

  12. The Inventory Of High Objects Applying Laser Scanning, Focus On The Cataloguing A Reinforced Concrete Industrial Chimney

    NASA Astrophysics Data System (ADS)

    Gawałkiewicz, Rafał

    2015-12-01

    There are many surveying methods to measure the inclination of a chimney with the use of classical protractor instruments (Theo 010A/B, T2 Wild), electronic theodolites (TC2002 Wild-Leica), electronic total stations, including mirrorless ones, allowing to define indirectly the course of the construction's axis on the selected observation levels. The methods are the following: indentations, direct projection, double-edged method, polar method with the option of mirrorless measurement. At the moment a very practical and quick measurement technology, significantly eliminating the influence of human errors on the observation results, is laser scanning. The article presents the results of the scanning of 120-metres high reinforced concrete industrial chimney of the Cement Plant "Ożarów", with the application of modern scanning total station VX Spatial Station by Trimble, as an alternative to the methods applied so far. The advantage of scanning is the possibility to obtain a point cloud, which, apart from the information on the course of the chimney axis in the space, provides detail information on the real shape and deformations of the coating of the object's core.

  13. Behaviour of Reinforced Concrete Columns of Various Cross-Sections Subjected to Fire

    NASA Astrophysics Data System (ADS)

    Balaji, Aneesha; Muhamed Luquman, K.; Nagarajan, Praveen; Madhavan Pillai, T. M.

    2016-09-01

    Fire resistance is one of the crucial design regulations which are now mandatory in most of the design codes. Therefore, a thorough knowledge of behaviour of structures exposed to fire is required in this aspect. Columns are the most vulnerable structural member to fire as it can be exposed to fire from all sides. However, the data available for fire resistant design for columns are limited. Hence the present work is focused on the effect of cross-sectional shape of column in fire resistance design. The various cross-sections considered are Square, Ell (L), Tee (T), and Plus (`+') shape. Also the effect of size and shape and distribution of steel reinforcement on fire resistance of columns is studied. As the procedure for determining fire resistance is not mentioned in Indian Standard code IS 456 (2000), the simplified method (500 °C isotherm method) recommended in EN 1992-1-2:2004 (E) (Eurocode 2) is adopted. The temperature profiles for various cross-sections are developed using finite element method and these profiles are used to predict fire resistance capability of compression members. The fire resistance based on both numerical and code based methods are evaluated and compared for various types of cross-section.

  14. Detection and Inspection of Steel Bars in Reinforced Concrete Structures Using Active Infrared Thermography with Microwave Excitation and Eddy Current Sensors.

    PubMed

    Szymanik, Barbara; Frankowski, Paweł Karol; Chady, Tomasz; John Chelliah, Cyril Robinson Azariah

    2016-02-16

    The purpose of this paper is to present a multi-sensor approach to the detection and inspection of steel bars in reinforced concrete structures. In connection with our past experience related to non-destructive testing of different materials, we propose using two potentially effective methods: active infrared thermography with microwave excitation and the eddy current technique. In this article active infrared thermography with microwave excitation is analyzed both by numerical modeling and experiments. This method, based on thermal imaging, due to its characteriatics should be considered as a preliminary method for the assessment of relatively shallowly located steel bar reinforcements. The eddy current technique, on the other hand, allows for more detailed evaluation and detection of deeply located rebars. In this paper a series of measurement results, together with the initial identification of certain features of steel reinforcement bars will be presented.

  15. Detection and Inspection of Steel Bars in Reinforced Concrete Structures Using Active Infrared Thermography with Microwave Excitation and Eddy Current Sensors

    PubMed Central

    Szymanik, Barbara; Frankowski, Paweł Karol; Chady, Tomasz; John Chelliah, Cyril Robinson Azariah

    2016-01-01

    The purpose of this paper is to present a multi-sensor approach to the detection and inspection of steel bars in reinforced concrete structures. In connection with our past experience related to non-destructive testing of different materials, we propose using two potentially effective methods: active infrared thermography with microwave excitation and the eddy current technique. In this article active infrared thermography with microwave excitation is analyzed both by numerical modeling and experiments. This method, based on thermal imaging, due to its characteriatics should be considered as a preliminary method for the assessment of relatively shallowly located steel bar reinforcements. The eddy current technique, on the other hand, allows for more detailed evaluation and detection of deeply located rebars. In this paper a series of measurement results, together with the initial identification of certain features of steel reinforcement bars will be presented. PMID:26891305

  16. 13. Detail of steel ribs of T18, showing connectin to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Detail of steel ribs of T-18, showing connectin to concrete foundation wall - Advance Base Depot Davisville, Building T-17, Ninth Street southeast of Davisville Road, Davisville, Washington County, RI

  17. Fiber-Reinforced Rocks Akin to Roman Concrete Help Explain Ground Deformation at Campi Flegrei Caldera

    NASA Astrophysics Data System (ADS)

    Vanorio, Tiziana; Kanitpanyacharoen, Waruntorn

    2016-04-01

    engineering the mortar of the Roman concrete. The formation of fibrous minerals by intertwining filaments confers shear and tensile strength to the caprock, contributing to its ductility and increased resistance to fracture. The importance of the findings reported in this study lies not only on the fibrous and compositionally nature of the caprock but also on its possible physicochemical deterioration. Given the P-T-XCO2 conditions regulating the decarbonation reactions, the influx of new fluids into the Campi Flegrei system lowers the temperature of the decarbonation reaction and dilutes the existing CO2, thus triggering additional CO2, methane, and steam to form. As these gases rise toward the surface, the natural cement layer halts them, leading to pore pressure increase and subsequent ground deformations.

  18. Investigating the Impact of Temperature Changes, Material Aging, and Service Load on the Strain of a Reinforced Concrete Construction

    NASA Astrophysics Data System (ADS)

    Kanciruk, Adam

    2014-12-01

    Intensive exploitation of coal beds in the Upper Silesia Coal Basin led to the degradation of the Katowice-Muchowiec civilian/military airport. As a result, it became necessary to adapt the Pyrzowice military airport for use as a public transport facility. This involved reconstruction of a hangar located at the airport. As part of this process, a new hangar slab was constructed, designed in such a way as to bear the load of passenger aircraft. In the area of the greatest wheel load to the slab, three strain rosettes were installed for the purpose of monitoring the slab strain. The mointoring process - which has been automatically conducted for almost three years now - revealed deformations resulting from service load, the aging of reinforced concrete, and changes of its temperature. Intensywna eksploatacja górnośląskich złóż węgla doprowadziła do degradacji cywilno-wojskowego lotniska Katowice-Muchowiec. W związku z tym, wynikła konieczność przystosowania do celów komunikacyjnych lotniska wojskowego w Pyrzowicach, w tym przebudowy znajdującego się na jego terenie hangaru. W ramach przebudowy wykonano nową posadzkę, zdolną przenosić ciężar samolotów pasażerskich. W posadzce tej, w rejonie występowania największych nacisków zainstalowano 3 rozety tensometryczne w celu monitorowania jej odkształceń. Monitorowanie to, prowadzone w sposób automatyczny już niemal 3 lata, wykazało występowanie odkształceń będących skutkiem obciążeń eksploatacyjnych, starzenia się żelbetu oraz zmian jego temperatury.

  19. Chondrosarcoma of a rib

    PubMed Central

    Sangma, Mima Maychet B.; Dasiah, Simon

    2015-01-01

    Chondrosarcoma of a rib is a very rare malignant tumor of the bone. Most patients were present with an enlarging painful anterior chest wall tumor. We present a case of an asymptomatic 29-years old female with a tumor size of 10 cm × 12 cm on the left anterior chest wall involving the 8th rib. CT scan with intravenous contrast is the gold standard for radiological imaging and planning for surgery. Since chondrosarcoma is less sensitive to chemotherapy and radiotherapy, surgical treatment with extensive resection with a sufficient margin is considered first line treatment. PMID:25841154

  20. Span-to-depth ratio effect on shear strength of steel fiber-reinforced high-strength concrete deep beams using ANN model

    NASA Astrophysics Data System (ADS)

    Naik, Uday; Kute, Sunil

    2013-12-01

    The paper predicts the shear strength of high-strength steel fiber-reinforced concrete deep beams. It studies the effect of clear span-to-overall depth ratio on shear capacity of steel fiber high-strength deep beams using artificial neural network (ANN8). The three-layered model has eight input nodes which represent width, effective depth, volume fraction, fiber aspect ratio and shear span-to-depth ratio, longitudinal steel, compressive strength of concrete, and clear span-to-overall depth ratio. The model predicts the shear strength of high-strength steel fiber deep beams to be reasonably good when compared with the results of proposed equations by researchers as well as the results obtained by neural network (ANN7) which is developed for seven inputs excluding span-to-depth ratio. The developed neural network ANN8 proves the versatility of artificial neural networks to establish the relations between various parameters affecting complex behavior of steel fiber-reinforced concrete deep beams and costly experimental processes.

  1. Fiber reinforced concrete: Characterization of flexural toughness and some studies on fiber-matrix bond-slip interaction

    NASA Astrophysics Data System (ADS)

    Dubey, Ashish

    One major problem associated with the testing of fiber reinforced concrete specimens under flexural loading is that the measured post-cracking response is severely affected by the stiffness of the testing machine. As a consequence, misleading results are obtained when such a flexural response is used for the characterization of composite toughness. An assessment of a new toughness characterization technique termed the Residual Strength Test Method (RSTM) has been made. In this technique, a stable narrow crack is first created in the specimen by applying a flexural load in parallel with a steel plate under controlled conditions. The plate is then removed, and the specimen is tested in a routine manner in flexure to obtain the post-crack load versus displacement response. Flexural response for a variety of fiber reinforced cementitious composites obtained using the Residual Strength Test Method has been found to correlate very well with those obtained with relatively stiffer test configurations such as closed-loop test machines. The Residual Strength Test Method is found to be effective in differentiating between different fiber types, fiber lengths, fiber configurations, fiber volume fractions, fiber geometries and fiber moduli. In particular, the technique has been found to be extremely useful for testing cement-based composites containing fibers at very low dosages (<0.5% by volume). An analytical model based on shear lag theory is introduced to study the problem of fiber pullout in fiber reinforced composites. The proposed model eliminates limitations of many earlier models and captures essential features of pullout process, including progressive interfacial debonding, Poisson's effect, and variation in interfacial properties during the fiber pullout process. Interfacial debonding is modeled using an interfacial shear strength criterion. Influence of normal contact stress at the fiber-matrix interface is considered using shrink-fit theory, and the interfacial

  2. A Galvanic Sensor for Monitoring the Corrosion Condition of the Concrete Reinforcing Steel: Relationship Between the Galvanic and the Corrosion Currents

    PubMed Central

    Pereira, Elsa Vaz; Figueira, Rita Bacelar; Salta, Maria Manuela Lemos; da Fonseca, Inês Teodora Elias

    2009-01-01

    This work reports a study carried out on the design and performance of galvanic and polarization resistance sensors to be embedded in concrete systems for permanent monitoring of the corrosion condition of reinforcing steel, aiming to establish a correlation between the galvanic currents, Igal, and the corrosion currents, Icorr, estimated from the polarization resistance, Rp. Sensors have been tested in saturated Ca(OH)2 aqueous solutions, under a variety of conditions, simulating the most important parameters that can accelerate the corrosion of concrete reinforcing steel, such as carbonation, ingress of chloride ions, presence or absence of O2. For all the conditions, the influence of temperature (20 to 55 °C) has also been considered. From this study, it could be concluded that the galvanic currents are sensitive to the various parameters following a trend similar to that of the Rp values. A relationship between the galvanic and the corrosion current densities was obtained and the limiting values of the Igal, indicative of the state condition of the reinforcing steel for the designed sensor, were established. PMID:22291514

  3. [The osteometric method for the determination of sequential localization and sex characteristics of the ribs using discriminate analysis].

    PubMed

    Zviagin, V N; Permiakova, E Iu; Galitskaia, O I

    2009-01-01

    The study material was ribs of the Caucasoid carcasses from the collections of the Department of Anthropology, M.V. Lomonosov Moscow State University, and the Department of Personality Identification, Russian Centre of Forensic Medical Examination. Each rib was measured as stipulated by the 13 point program of A.I. Turovtsev (1972). The results were analysed with the use of the SPSS statistical packet. Diagnostic models were calculated for the purpose of forensic medicine practice based on step-by-step discriminative analysis. It is recommended to perform expert evaluation in two stages. The aim of the first stage, is to establish the group affiliation of a concrete rib. Group 1 comprises III-V ribs, group 2--ribs VI--VIII, and group 3--ribs IX-XI. Determination of the sequential localization of I, II, and XII ribs encounters practically no difficulty due to their unique anatomical structure. The accuracy of classication of group localization of the ribs amounts to 99.6%. At the second stage, individual number of a concrete rib within a group is determined. The accuracy of classification of ribs belonging to groups 1 and 3 is 80.2% and 85.7% respectively and that of ribs in group 2 is lightly lower (41.7-69%). Sexual identity of the ribs was determined by means of multidimensional discriminative analysis. The accuracy of diagnosis is directly related to the integrity of the study material; in other words, it depends on the amount of ribs available for the analysis. It is shown that sexual identity is best established for rib VI followed by ribs VIII, II, IV, and I respectively. The main discriminative features include the total arch length, costal plane curvature, and height-width dimension. Diagnostic equations are derived for the determination of sexual identity of individual ribs for the practical purposes of forensic medical examination.

  4. 3D mapping of reinforcement and tendon ducts on pre-stressed concrete bridges by means of Ground Penetrating Radar (GPR)

    NASA Astrophysics Data System (ADS)

    Cheilakou, E.; Theodorakeas, P.; Koui, M.; Zeris, C.

    2014-03-01

    The present study evaluates the potential of GPR for the inspection of pre-stressed concrete bridges and its usefulness to provide non visible information of the interior structural geometry and condition, required for strengthening and rehabilitation purposes. For that purpose, different concrete blocks of varying dimensions with embedded steel reinforcement bars, tendon ducts and fabricated voids, were prepared and tested by means of GPR in a controlled laboratory environment. 2D data acquisition was carried out in reflection mode along single profile lines of the samples in order to locate the internal structural elements. 3D surveys were also performed in a grid format both along horizontal and vertical lines, and the individual profiles collected were interpolated and further processed using a 3D reconstruction software, in order to provide a detailed insight into the concrete structure. The obtained 2D profiles provided the accurate depth and position of the embedded rebars and tendon ducts, verifying the original drawings. 3D data cubes were created enabling the presentation of depth slices and providing additional information such as shape and localization of the internal elements. The results obtained from this work showed the effectiveness and reliability of the GPR technique for pre-stressed concrete bridge investigations.

  5. Analytical and Experimental Assessment of Seismic Vulnerability of Beam-Column Joints without Transverse Reinforcement in Concrete Buildings

    NASA Astrophysics Data System (ADS)

    Hassan, Wael Mohammed

    Beam-column joints in concrete buildings are key components to ensure structural integrity of building performance under seismic loading. Earthquake reconnaissance has reported the substantial damage that can result from inadequate beam-column joints. In some cases, failure of older-type corner joints appears to have led to building collapse. Since the 1960s, many advances have been made to improve seismic performance of building components, including beam-column joints. New design and detailing approaches are expected to produce new construction that will perform satisfactorily during strong earthquake shaking. Much less attention has been focused on beam-column joints of older construction that may be seismically vulnerable. Concrete buildings constructed prior to developing details for ductility in the 1970s normally lack joint transverse reinforcement. The available literature concerning the performance of such joints is relatively limited, but concerns about performance exist. The current study aimed to improve understanding and assessment of seismic performance of unconfined exterior and corner beam-column joints in existing buildings. An extensive literature survey was performed, leading to development of a database of about a hundred tests. Study of the data enabled identification of the most important parameters and the effect of each parameter on the seismic performance. The available analytical models and guidelines for strength and deformability assessment of unconfined joints were surveyed and evaluated. In particular, The ASCE 41 existing building document proved to be substantially conservative in joint shear strength estimation. Upon identifying deficiencies in these models, two new joint shear strength models, a bond capacity model, and two axial capacity models designed and tailored specifically for unconfined beam-column joints were developed. The proposed models strongly correlated with previous test results. In the laboratory testing phase of

  6. Multiscale modeling of the effect of the interfacial transition zone on the modulus of elasticity of fiber-reinforced fine concrete

    NASA Astrophysics Data System (ADS)

    Zhang, J. L.; Liu, X.; Yuan, Y.; Mang, H. A.

    2015-01-01

    A multiscale model of fiber-reinforced fine concrete is developed, with special emphasis on the interfacial transition zone (ITZ). It does not only allow the prediction of the modulus of elasticity but also permits the determination of the strain and stress field. The model is based on the mathematical homogenization method and implemented in the frame of the finite element method. A comparison of model predictions with experimental results taken from the literature validates the model's effectiveness for prediction of the elasticity modulus. The effect of the thickness and of the elasticity modulus of the ITZ on the elasticity modulus of the homogenized material as well as the influence of the strength of the ITZ on the elastic limit of the homogenized material, are investigated numerically. Furthermore, a sensitivity analysis is carried out to evaluate the influence of fine-scale factors on the elasticity modulus of ultra-high performance concrete.

  7. A More Realistic Lateral Load Pattern for Design of Reinforced Concrete Buildings with Moment Frames and Shear Walls

    SciTech Connect

    Hosseini, Mahmood

    2008-07-08

    In this research it has been tried to find a more realistic distribution pattern for the seismic load in reinforced concrete (R/C) buildings, having moment frames with shear walls as their lateral resisting system, by using Nonlinear Time History Analyses (NLTHA). Having shear wall as lateral load bearing system decreases the effect of infill walls in the seismic behavior of the building, and therefore the case of buildings with shear walls has been considered for this study as the first stage of the studies on lateral load patterns for R/C buildings. For this purpose, by assuming three different numbers of bays in each direction and also three different numbers of stories for the buildings, several R/C buildings, have been studied. At first, the buildings have been designed by the Iranian National Code for R/C Buildings. Then they have been analyzed by a NLTHA software using the accelerograms of some well-known earthquakes. The used accelerograms have been also scaled to various levels of peak ground acceleration (PGA) such as 0.35 g, 0.50 g, and 0.70 g, to find out the effect of PGA in the seismic response. Numerical results have shown that firstly the values of natural period of the building and their shear force values, calculated by the code, are not appropriate in all cases. Secondly, it has been found out that the real lateral load pattern is quite different with the one suggested by the seismic code. Based on the NLTHA results a new lateral load pattern has been suggested for this kind of buildings, in the form of some story-dependent modification factors applied to the existing code formula. The effects of building's natural period, as well as its number of stories, are taken into account explicitly in the proposed new load pattern. The proposed load pattern has been employed to redesign the buildings and again by NLTHA the real lateral load distribution in each case has been obtained which has shown very good agreement with the proposed pattern.

  8. Modeling, Analysis, and Preservation Techniques for Historic Reinforced Concrete Structures in Seismic Prone Regions Case Study: Augusta Airship Hangar, Sicily

    SciTech Connect

    Cronin, Kelly; Whyte, Catherine; Reiner, Tom

    2008-07-08

    also can be used as an example for the rehabilitation of other historic structures. The techniques and processes discussed in this paper can be applied to other historic reinforced concrete structures and can be expanded upon in future investigations.

  9. Nineth Rib Syndrome after 10th Rib Resection

    PubMed Central

    Yu, Hyun Jeong; Jeong, Yu Sub; Lee, Dong Hoon

    2016-01-01

    The 12th rib syndrome is a disease that causes pain between the upper abdomen and the lower chest. It is assumed that the impinging on the nerves between the ribs causes pain in the lower chest, upper abdomen, and flank. A 74-year-old female patient visited a pain clinic complaining of pain in her back, and left chest wall at a 7 on the 0-10 Numeric Rating scale (NRS). She had a lateral fixation at T12-L2, 6 years earlier. After the operation, she had multiple osteoporotic compression fractures. When the spine was bent, the patient complained about a sharp pain in the left mid-axillary line and radiating pain toward the abdomen. On physical examination, the 10th rib was not felt, and an image of the rib-cage confirmed that the left 10th rib was severed. When applying pressure from the legs to the 9th rib of the patient, pain was reproduced. Therefore, the patient was diagnosed with 9th rib syndrome, and ultrasound-guided 9th and 10th intercostal nerve blocks were performed around the tips of the severed 10th rib. In addition, local anesthetics with triamcinolone were administered into the muscles beneath the 9th rib at the point of the greatest tenderness. The patient's pain was reduced to NRS 2 point. In this case, it is suspected that the patient had a partial resection of the left 10th rib in the past, and subsequent compression fractures at T8 and T9 led to the deformation of the rib cage, causing the tip of the remaining 10th rib to impinge on the 9th intercostal nerves, causing pain. PMID:27413484

  10. Phyllanthus muellerianus and C6H15NO3 synergistic effects on 0.5 M H2SO4-immersed steel-reinforced concrete: Implication for clean corrosion-protection of wind energy structures in industrial environment

    NASA Astrophysics Data System (ADS)

    Okeniyi, Joshua Olusegun; Omotosho, Olugbenga Adeshola; Popoola, Abimbola Patricia Idowu; Loto, Cleophas Akintoye

    2016-07-01

    This paper investigates Phyllanthus muellerianus leaf-extract and C6H15NO3 (triethanolamine: TEA) synergistic effects on reinforcing-steel corrosion-inhibition and the compressive-strength of steel-reinforced concrete immersed in 0.5 M H2SO4. This is to assess suitability of the synergistic admixture usage for wind-energy steel-reinforced concrete structures designed for industrial environments. Steel-reinforced concrete specimens were admixed with individual and synergistic designs of Phyllanthus muellerianus leaf-extract and C6H15NO3 admixtures and immersed in the 0.5 M H2SO4. Electrochemical monitoring of corrosion potential, as per ASTM C876-91 R99, and corrosion current were obtained and statistically analysed, as per ASTM G16-95 R04, for modelling noise resistance. Post-immersion compressive-strength testing then followed, as per ASTM C39/C39M-03, for detailing the admixture effect on load-bearing strength of the steel-reinforced concrete specimens. Results showed that while individual Phyllanthus muellerianus leaf-extract concentrations exhibited better inhibition-efficiency performance than C6H15NO3, synergistic additions of C6H15NO3 to Phyllanthus muellerianus leaf-extract improved steel-rebar corrosion-inhibition. Thus, 6 g Phyllanthus muellerianus + 2 g C6H15NO3 synergistically improved inhibition-efficiency to η = 84.17%, from η = 55.28% by the optimal chemical or from η = 74.72% by the optimal plant-extract admixtures. The study also established that improved compressive strength of steel-reinforced concrete with acceptable inhibition of the steel-rebar corrosion could be attained through optimal combination of the Phyllanthus muellerianus leaf-extract and C6H15NO3 admixtures.

  11. The diagnostic utility of rib series in assessing rib fractures.

    PubMed

    Shuaib, Waqas; Vijayasarathi, Arvind; Tiwana, Muhammad Hamza; Johnson, Jamlik-Omari; Maddu, Kiran Kumar; Khosa, Faisal

    2014-04-01

    Rib series rarely add information to the posteroanterior (PA) film for the diagnosis of rib fractures. In this investigation, we evaluated the utility of rib X-rays using turnaround time (TAT), radiation exposure, and cost-efficiency as the key parameters. This investigation was conducted from January 2008 to December 2012. We included patients who had rib series performed for suspected rib fractures. TAT for patients was calculated from the time exam was ordered by the emergency department (ED) physician/staff to time the report was finalized by the attending radiologist. Effective radiation dose for rib series was calculated as a summation of radiation dose from the standard rib series images for each patient. Cost-efficiency was determined based on the number of interventions that took place as a result of a complicated study. Our investigation consisted of 422 patients, 208 females aged (57 ± 20.8) and 214 males aged (48 ± 17.3). A total of 74(17.5 %) abnormal findings were noted, out of which only 1(0.23 %) underwent management change. The mean turnaround time for patients undergoing rib series had a value of 133.5 (±129.8) min as opposed to a single chest PA of 61.8(± 64) min. Average effective radiation dose for a rib series was 0.105 (±0.04) mSv, whereas average effective radiation dose of a single chest PA was 0.02 mSv. Dedicated rib series has a low-yield diagnostic value as it pertains to management change. The overall impact on patient care based on our findings is small when compared to the risks associated with prolonged TAT, repeated exposure to radiation, and extensive medical costs.

  12. Evaluating the integrity of the reinforced concrete structure repaired by epoxy injection using simulated transfer function of impact-echo response

    SciTech Connect

    Cheng, Chia-Chi; Yu, Chih-peng; Wu, Jiunn-Hong; Hsu, Keng-Tsan; Ke, Ying-Tsu

    2014-02-18

    Cracks and honeycombs are often found inside reinforced concrete (RC) structure caused by excessive external force, or improper casting of concrete. The repairing method usually involves epoxy injection. The impact-echo method, which is a sensitive for detecting of the interior voids, may not be applicable to assess the integrity of the repaired member as both air and epoxy are less in acoustic impedances. In this study, the repaired RC structure was evaluated by the simulated transfer function of the IE displacement waveform where the R-wave displacement waveform is used as a base of a simulated force-time function. The effect of different thickness of the epoxy layer to the amplitude corresponding to the interface is studied by testing on specimen containing repaired naturally delaminated cracks with crack widths about 1 mm, 3 mm and 5 mm. The impact-echo responses were compared with the drilling cores at the test positions. The results showed the cracks were not fully filled with epoxy when the peak amplitude corresponding to the interface dropped less than 20%. The peak corresponding to the thicker epoxy layer tends to be larger in amplitude. A field study was also performed on a column damaged by earthquake before and after repairing.

  13. Determination of chlorine, sulfur and carbon in reinforced concrete structures by double-pulse laser-induced breakdown spectroscopy

    NASA Astrophysics Data System (ADS)

    Labutin, Timur A.; Popov, Andrey M.; Zaytsev, Sergey M.; Zorov, Nikita B.; Belkov, Mikhail V.; Kiris, Vasilii V.; Raikov, Sergey N.

    2014-09-01

    Accurate and reliable quantitative determination of non-metal corrosion agents in concrete is still an actual task of analytical use of LIBS. Two double-pulse LIBS systems were tested as a tool for the determination of chlorine, sulfur and carbon in concretes. Both systems had collinear configuration; a laboratory setup was equipped with an ICCD and two lasers (355/532 nm + 540 nm), but a CCD was a detector for a mobile system with one laser (1064 nm). Analytical lines of Cl I at 837.59 nm, S I at 921 nm and C I at 247.86 nm were used to plot calibration curves. Optimal interpulse delays for the laboratory setup were 4 μs for chlorine and 2.8 μs for carbon, while an interpulse delay of 2 μs was optimal for chlorine and sulfur determination with the mobile system. We suggested the normalization of the Cl I line at 837.59 nm to the Mg II line at 279.08 nm (visible at 837.23 nm in the third order) to compensate for pulse-to-pulse fluctuations of chlorine lines. It provided the decrease of the detection limit of chlorine from 400 ppm to 50 ppm. Therefore, we reported that LIBS can be used to determine main corrosive active substances under ambient conditions in concrete below critical threshold values. Moreover, the application of the mobile system for in-situ qualitative assessment of corrosion way of a steel cage of a swimming pool dome was also demonstrated. It was found that chloride corrosion due to the disinfection of water was the main way for corrosion of the open part steel and the steel rebar inside the concrete.

  14. Modal density and modal distribution of bending wave vibration fields in ribbed plates.

    PubMed

    Dickow, Kristoffer Ahrens; Brunskog, Jonas; Ohlrich, Mogens

    2013-10-01

    Plates reinforced by ribs or joists are common elements in lightweight building structures, as well as in other engineering structures such as vehicles, ships, and aircraft. These structures, however, are often not well suited for simple structural acoustic prediction models such as statistical energy analysis. One reason is that the modal density is not uniformly distributed due to the spatial periodicity introduced by the ribs. This phenomenon is investigated in the present paper, using a modal model of a ribbed plate. The modal model uses the Fourier sine modes, and the coupling between the plate and ribs is incorporated using Hamilton's principle. This model is then used to investigate the modal density of the considered spatially periodic structure, and a grouping of the modes in different dominating directions is proposed. Suggestions are also given regarding how to proceed towards a simplified prediction model for ribbed plates. PMID:24116410

  15. Rebound rib: stress-induced first rib fracture.

    PubMed

    Sacchetti, A D; Beswick, D R; Morse, S D

    1983-03-01

    Reported are two cases of stress-induced fracture of the first rib in young, healthy basketball players. Presumably the fractures resulted from violent contraction of the scalene musculature. This is the usual method of production of stress-induced first rib fracture, but basketball-related cases have not been reported previously. This entity probably is underdiagnosed, and is amenable to conservative outpatient management in most cases.

  16. An unexpected complication of titanium rib clips.

    PubMed

    Kaplan, Tevfik; Gulbahar, Gultekin; Gundogdu, Ahmet Gokhan; Han, Serdar

    2014-12-01

    Surgical stabilization of the rib fractures has been successfully performed for the management of pain in multiple rib fractures, fixation of chronically painful nonunion, reduction of overriding ribs, and flail chest cases. Herein we report a patient who was treated with titanium rib clips after a motor vehicle accident leading to pulmonary parenchymal laceration and multiple painful rib fractures. Three of the rib clips were broken 4 months after the operation. The patient underwent the second operation for restabilization of the broken ribs. We review the relevant literature, with particular emphasis on the management of this complication.

  17. Pleuropulmonary melioidosis with osteomyelitis rib

    PubMed Central

    Neliyathodi, Suhail; Thazhathethil, Abdul Nazar; Pallivalappil, Lisha; Balakrishnan, Deepu

    2015-01-01

    Melioidosis is a multiorgan infectious disease caused by Burkholderia pseudomallei. Few cases have been reported from south India. This is a case report of pleuropulmonary melioidosis with rib osteomyelitis. PMID:25624602

  18. Study of Post-Cracking Torsional Behaviour of High-Strength Reinforced Concrete Beams with a Ferrocement Wrap

    NASA Astrophysics Data System (ADS)

    Behera, Gopal Charan; Rao, Tippabhotla Durga Gunneswara; Kameswara, Chittem Butchi

    2014-09-01

    The post-cracking behaviour of structures subjected to torsion can be well predicted by Hsu's softened truss model. The softened truss model is applicable to structures having symmetry in their material properties on all four sides. Wrapping on three faces is a common phenomenon when the top face is provided with a flange or slab. Such a wrapping on three faces of a beam is referred to as a "U" wrap. "U" wraps are better wrapping strategies for distressed structures, as their top face is not accessible for many structures. The material property of an unwrapped face differs from the rest of wrapped faces. For the effective use of wrapping, the unwrapped face needs to be provided with a material having a higher resistance to tension and shear. For this, high-strength concrete in the core is a better option. Here, an attempt is made to predict the torsional capacity of "U" wrapped high-strength concrete beams having an asymmetry in the material using a softened truss model with suitable modifications of the material properties. Efficient algorithms are proposed for the solution of simultaneous equations. The predictions are found to be in good agreement with the experimental test results

  19. Flexural toughness of steel fiber reinforced high performance concrete containing nano-SiO2 and fly ash.

    PubMed

    Zhang, Peng; Zhao, Ya-Nan; Li, Qing-Fu; Wang, Peng; Zhang, Tian-Hang

    2014-01-01

    This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and equivalent flexural strength of the specimen were measured, respectively, and the relational curves between the vertical load and the midspan deflection (P(V)-δ) were obtained. The results indicate that steel fiber has great effect on the flexural toughness parameters and relational curves (P(V)-δ) of the three-point bending beam specimen. When the content of steel fiber increases from 0.5% to 2%, the flexural toughness parameters increase gradually and the curves are becoming plumper and plumper with the increase of steel fiber content, respectively. However these flexural toughness parameters begin to decrease and the curves become thinner and thinner after the steel fiber content exceeds 2%. It seems that the contribution of steel fiber to the improvement of flexural toughness of the high performance concrete containing fly ash and nano-SiO2 is well performed only when the steel fiber content is less than 2%.

  20. Flexural Toughness of Steel Fiber Reinforced High Performance Concrete Containing Nano-SiO2 and Fly Ash

    PubMed Central

    Zhao, Ya-Nan; Li, Qing-Fu; Wang, Peng; Zhang, Tian-Hang

    2014-01-01

    This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and equivalent flexural strength of the specimen were measured, respectively, and the relational curves between the vertical load and the midspan deflection (PV-δ) were obtained. The results indicate that steel fiber has great effect on the flexural toughness parameters and relational curves (PV-δ) of the three-point bending beam specimen. When the content of steel fiber increases from 0.5% to 2%, the flexural toughness parameters increase gradually and the curves are becoming plumper and plumper with the increase of steel fiber content, respectively. However these flexural toughness parameters begin to decrease and the curves become thinner and thinner after the steel fiber content exceeds 2%. It seems that the contribution of steel fiber to the improvement of flexural toughness of the high performance concrete containing fly ash and nano-SiO2 is well performed only when the steel fiber content is less than 2%. PMID:24883395

  1. DEMONSTRATION OF LEACHXS/ORCHESTRA CAPABILITIES BY SIMULATING CONSTITUENT RELEASE FROM A CEMENTITIOUS WASTE FORM IN A REINFORCED CONCRETE VAULT

    SciTech Connect

    Langton, C.; Meeussen, J.; Sloot, H.

    2010-03-31

    The objective of the work described in this report is to demonstrate the capabilities of the current version of LeachXS{trademark}/ORCHESTRA for simulating chemical behavior and constituent release processes in a range of applications that are relevant to the CBP. This report illustrates the use of LeachXS{trademark}/ORCHESTRA for the following applications: (1) Comparing model and experimental results for leaching tests for a range of cementitious materials including cement mortars, grout, stabilized waste, and concrete. The leaching test data includes liquid-solid partitioning as a function of pH and release rates based on laboratory column, monolith, and field testing. (2) Modeling chemical speciation of constituents in cementitious materials, including liquid-solid partitioning and release rates. (3) Evaluating uncertainty in model predictions based on uncertainty in underlying composition, thermodynamic, and transport characteristics. (4) Generating predominance diagrams to evaluate predicted chemical changes as a result of material aging using the example of exposure to atmospheric conditions. (5) Modeling coupled geochemical speciation and diffusion in a three layer system consisting of a layer of Saltstone, a concrete barrier, and a layer of soil in contact with air. The simulations show developing concentration fronts over a time period of 1000 years. (6) Modeling sulfate attack and cracking due to ettringite formation. A detailed example for this case is provided in a separate article by the authors (Sarkar et al. 2010). Finally, based on the computed results, the sensitive input parameters for this type of modeling are identified and discussed. The chemical speciation behavior of substances is calculated for a batch system and also in combination with transport and within a three layer system. This includes release from a barrier to the surrounding soil as a function of time. As input for the simulations, the physical and chemical properties of the

  2. Ethical considerations for a better collaboration between architects and structural engineers: design of buildings with reinforced concrete frame systems in earthquake zones.

    PubMed

    Hurol, Yonca

    2014-06-01

    Architects design building structures, although structural design is the profession of structural engineers. Thus, it is better for architects and structural engineers to collaborate starting from the initial phases of the architectural design. However, this is not very common because of the contradictory design processes and value systems held within the two professions. This article provides a platform upon which architects and structural engineers can resolve the value conflicts between them by analysing phases of the structural design of reinforced concrete frame systems in architecture, the criteria of the structural design for each phase and determining the conflicting values for each criterion. The results shown in the article demonstrate that the architectural design of structures is a complex process, which is based on contradictory values and value systems. Finally, the article suggests to architects and structural engineers to use Value Sensitive Design and to choose an appropriate team leader in order to resolve the unethical conflict between them and to avoid any unreasonable decision making.

  3. Analysis of rib dielectric waveguides

    NASA Astrophysics Data System (ADS)

    Dagli, N.; Fonstad, C. G.

    1985-04-01

    It is noted in the present analysis of rib dielectric waveguides on the basis of a mode-matching technique that, when the constituent slab guides support only one guided mode, the cutoff condition for the higher-order modes is the same as the result yielded by the effective dielectric constant method. When the rib region is thick enough to support two guided slab modes, however, the cutoff conditions are significantly different. Universal design curves are obtained for this case, and the results obtained are compared with the Marcatili (1974) theory for such structures.

  4. An uncommon congenital anomaly of the ribs

    PubMed Central

    Padmanabhan, Arjun; Zunimol, Mohamed Puthiyaveettil

    2016-01-01

    Intrathoracic rib is an extremely rare congenital anomaly of the ribs. Here, we present the case of a 10-year-old boy with asthma who, on routine evaluation, was found to have this anomaly. PMID:27051123

  5. Non-diffuseness of vibration fields in ribbed plates.

    PubMed

    Brunskog, Jonas; Chung, Hyuck

    2011-03-01

    This paper presents numerical simulations of structural intensity in a rib-reinforced plate, investigating the diffuseness. Many prediction models of building and structural acoustics, such as statistical energy analysis or energy flow methods, assume the vibrational wave fields to be diffuse. However, the diffuseness assumption is not always valid. One such example is a rib-reinforced plate typically found in a lightweight floor with wooden joists. Other examples can be found in aircraft and ship structures. The structural intensity of a ribbed plate is computed at low to mid frequencies using the Fourier sine expansion of the transverse displacement of the plate. Hamilton's principle is used in combination with thin plate theory and Euler beam theory. The model takes into account interactions between components. The Fourier sine modes are re-formulated as plane waves in a radial coordinate system, which can express the structural intensity in terms of the angular component of the modes. In the simulations, ensemble averages and rain-on-the-roof excitations are used. The numerical results show that the structural intensity varies significantly as the angle of propagation changes and cannot be assumed to form a diffuse field.

  6. Non-diffuseness of vibration fields in ribbed plates.

    PubMed

    Brunskog, Jonas; Chung, Hyuck

    2011-03-01

    This paper presents numerical simulations of structural intensity in a rib-reinforced plate, investigating the diffuseness. Many prediction models of building and structural acoustics, such as statistical energy analysis or energy flow methods, assume the vibrational wave fields to be diffuse. However, the diffuseness assumption is not always valid. One such example is a rib-reinforced plate typically found in a lightweight floor with wooden joists. Other examples can be found in aircraft and ship structures. The structural intensity of a ribbed plate is computed at low to mid frequencies using the Fourier sine expansion of the transverse displacement of the plate. Hamilton's principle is used in combination with thin plate theory and Euler beam theory. The model takes into account interactions between components. The Fourier sine modes are re-formulated as plane waves in a radial coordinate system, which can express the structural intensity in terms of the angular component of the modes. In the simulations, ensemble averages and rain-on-the-roof excitations are used. The numerical results show that the structural intensity varies significantly as the angle of propagation changes and cannot be assumed to form a diffuse field. PMID:21428497

  7. Radial rib antenna surface deviation analysis program

    NASA Technical Reports Server (NTRS)

    Coyner, J. V., Jr.

    1971-01-01

    A digital computer program was developed which analyzes any radial rib antenna with ribs radiating from a central hub. The program has the capability for calculating the antenna surface contour (reversed pillowing effect), the optimum rib shape for minimizing the rms surface error, and the actual rms surface error. Rib deflection due to mesh tension and catenary cable tension can also be compensated for, and the pattern from which the mesh gores are cut can be determined.

  8. Short Time Impulse Response Function (STIRF) for automatic evaluation of the variation of the dynamic parameters of reinforced concrete framed structures during strong earthquakes.

    NASA Astrophysics Data System (ADS)

    Carlo Ponzo, Felice; Ditommaso, Rocco

    2015-04-01

    the results provided in this study, the methodology seems to be able to evaluate fast variations (over time) of dynamic parameters of a generic reinforced concrete framed structure. Further analyses are necessary to better calibrate the length of the moving time-window (in order to minimize the spurious frequency within each Interferometric Response Function evaluated on both weak and strong motion phases) and to verify the possibility to use the STIRF to analyse the nonlinear behaviour of general systems. Acknowledgements This study was partially funded by the Italian Civil Protection Department within the project DPC-RELUIS 2014 - RS4 ''Seismic observatory of structures and health monitoring''. References R. Ditommaso, F.C. Ponzo (2015). Automatic evaluation of the fundamental frequency variations and related damping factor of reinforced concrete framed structures using the Short Time Impulse Response Function (STIRF). Engineering Structures, 82 (2015), 104-112. http://dx.doi.org/10.1016/j.engstruct.2014.10.023.

  9. How Concrete Is Concrete?

    ERIC Educational Resources Information Center

    Gravemeijer, Koeno

    2011-01-01

    If we want to make something concrete in mathematics education, we are inclined introduce, what we call, "manipulatives", in the form of tactile objects or visual representations. If we want to make something concrete in a everyday-life conversation, we look for an example. In the former, we try to make a concrete model of our own,…

  10. Rib forming tool for tubing

    DOEpatents

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  11. Segmentation of ribs in digital chest radiographs

    NASA Astrophysics Data System (ADS)

    Cong, Lin; Guo, Wei; Li, Qiang

    2016-03-01

    Ribs and clavicles in posterior-anterior (PA) digital chest radiographs often overlap with lung abnormalities such as nodules, and cause missing of these abnormalities, it is therefore necessary to remove or reduce the ribs in chest radiographs. The purpose of this study was to develop a fully automated algorithm to segment ribs within lung area in digital radiography (DR) for removal of the ribs. The rib segmentation algorithm consists of three steps. Firstly, a radiograph was pre-processed for contrast adjustment and noise removal; second, generalized Hough transform was employed to localize the lower boundary of the ribs. In the third step, a novel bilateral dynamic programming algorithm was used to accurately segment the upper and lower boundaries of ribs simultaneously. The width of the ribs and the smoothness of the rib boundaries were incorporated in the cost function of the bilateral dynamic programming for obtaining consistent results for the upper and lower boundaries. Our database consisted of 93 DR images, including, respectively, 23 and 70 images acquired with a DR system from Shanghai United-Imaging Healthcare Co. and from GE Healthcare Co. The rib localization algorithm achieved a sensitivity of 98.2% with 0.1 false positives per image. The accuracy of the detected ribs was further evaluated subjectively in 3 levels: "1", good; "2", acceptable; "3", poor. The percentages of good, acceptable, and poor segmentation results were 91.1%, 7.2%, and 1.7%, respectively. Our algorithm can obtain good segmentation results for ribs in chest radiography and would be useful for rib reduction in our future study.

  12. Belt-rib concept for variable-camber airfoils: recent developments

    NASA Astrophysics Data System (ADS)

    Campanile, Lucio F.; Seack, Oliver; Sachau, Delf

    2000-06-01

    The belt-rib concept for lifting surfaces with variable camber evolved at DLR recently as one of the most promising solutions for the adaptive wing. With the belt-rib idea the adaptive wing issue is approached in a new way: instead of a 'mechatronic' solution with hinges or linear bearings a 'structronic' solution is chosen, where defined, distributed flexibility allow the desired shape changes. The new concept evolves from the classical wing structure. The classical rib, which is in charge of the wing section's stiffness, is replaced by a 'belt rib,' which allows camber changes within given limits while leaving the remaining in-plane stiffness properties of the section widely unchanged. The evolution of the belt-rib concept was accompanied by experimental tests on different prototypes. The last developments concern the construction of a model with solid-state hinges, realized as hybrid glass fiber -- carbon-fiber reinforced composite structure. The model is actuated mechanically by Bowden cables, which can be replaced by shape memory wires in the next development stage. In this paper, the fundamentals of the concept and the most relevant results of the first developments are reported. A description of the new belt-rib design follows, which was implemented in a new prototype. The description of the experimental strength proof and an outline of further development work conclude the paper.

  13. Failure of underground concrete structures subjected to blast loadings

    NASA Technical Reports Server (NTRS)

    Ross, C. A.; Nash, P. T.; Griner, G. R.

    1979-01-01

    The response and failure of two edges of free reinforced concrete slabs subjected to intermediate blast loadings are examined. The failure of the reinforced concrete structures is defined as a condition where actual separation or fracture of the reinforcing elements has occurred. Approximate theoretical methods using stationary and moving plastic hinge mechanisms with linearly varying and time dependent loadings are developed. Equations developed to predict deflection and failure of reinforced concrete beams are presented and compared with the experimental results.

  14. The tagged RIBs facility of LNS

    SciTech Connect

    De Napoli, M.; Raciti, G.; Rapisarda, E.; Cardella, G.; Amorini, F.; Calabretta, L.; Sfienti, C.

    2007-11-30

    Radioactive Ion Beams (RIBs) are produced In-Flight at the Laboratori Nazionali del Sud (LNS) by projectile fragmentation on light targets at intermediate energies. RIBs rates up to 10{sup 5} ions/sec have been measured and about 95% of secondary beam has been transported up to one of the experimental caves. The {delta}E-ToF identification method was successfully applied to tag, event-by-event, the RIBs before the interaction with a secondary reaction target.

  15. Turbine bucket natural frequency tuning rib

    DOEpatents

    Wang, John Zhiqiang; Norton, Paul Francis; Barb, Kevin Joseph; Jacala, Ariel Caesar-Prepena

    2002-01-01

    A tuning rib is added preferably in the aft cavity of a cored turbine bucket to alter the bucket's natural frequencies. The tuning rib may be a solid rib or a segmented rib and is particularly suited for altering high order frequency modes such as 2T, 4F and 1-3S. As such, detrimental crossings of natural bucket frequencies and gas turbine stimuli can be avoided to thereby improve the reliability of a gas turbine without impacting other features of the bucket that are important to the performance of the gas turbine.

  16. Intraosseous Angiolipoma of the Rib.

    PubMed

    Celik, Ali; Sezen, Celal Bugra; Ertunc, Onur; Tastepe, Abdullah Irfan

    2015-12-01

    Angiolipomas are a subgroup of lipomas and are rarely observed benign tumours in which mature fat tissue and angiomatous elements exist jointly. Costa-induced angiolipomas are rarer. A male patient aged 46 years consulted our clinic due to severe pain in his left side. The patient's X-ray showed a lobulated area with increased density (bone mass) in the left upper zone of the lung. A lesion in the fourth rib was excised with a left thoracotomy. Pathological diagnosis was reported as angiolipoma.

  17. Utilization of fiber optic Bragg grating sensors in concrete columns confined with glass-fiber-reinforced plastic (GFRP) laminate under uniaxial compression test

    NASA Astrophysics Data System (ADS)

    Chan, Peter K. C.; Lau, Alan K.; Jin, Wei; Zhou, Limin

    1999-01-01

    In this paper we report of experimental studies on strain monitoring by using fiber Bragg grating sensors in concrete structures. The strain variation of the specimen under different loading conditions were monitored by the Fiber- optic Bragg grating (FBG) sensors. The FBG sensors have been pre-installed in the structure by embedding either inside the concrete specimen or at the interface between the concrete and the composites. The strain reading from the fiber grating sensor compares favorably with that obtained from the conventional strain gauge in uni-axial compression testing. The test result generally indicated that the concrete structures can be strengthened significantly by wrapping with glassfiber composites. The sensor embedded at the notch tip provides a very good indication of the health condition of the strengthened structure, especially in high stress concentration area. The strain sensitivity by using FBG sensor is 67 (mu) (epsilon) .

  18. Acute hematogenous osteomyelitis of the rib

    SciTech Connect

    Levinsohn, E.M.; Sternick, A.; Echeverria, T.S.; Yuan, H.A.

    1982-08-01

    Two cases of acute hematogenous osteomyelitis of the rib are presented. In one case the etiologic agent was Staphylococcus aureus coagulase-positive and in the other it was Bacteroides corrodens. Although an uncommon disease, hematogenous osteomyelitis should be considered in the differential diagnosis of destructive lesions of the rib. Anaerobic and aerobic cultures should be obtained for bacteriologic analysis.

  19. Jet flow on ribbed curved surfaces

    NASA Astrophysics Data System (ADS)

    Lashkov, Iu. A.; Sokolova, I. N.; Shumilkina, E. A.

    1992-02-01

    The objective of the study was to investigate the possibility of using microribbing to reduce turbulent friction in Coanda flows over curved surfaces. It is shown that ribs make it possible to reduce the effect of a jet impinging on an obstacle and to prevent the Coanda effect when jet attachment is undesirable. The optimal rib parameters are determined.

  20. Nozzle airfoil having movable nozzle ribs

    DOEpatents

    Yu, Yufeng Phillip; Itzel, Gary Michael

    2002-01-01

    A nozzle vane or airfoil structure is provided in which the nozzle ribs are connected to the side walls of the vane or airfoil in such a way that the ribs provide the requisite mechanical support between the concave side and convex side of the airfoil but are not locked in the radial direction of the assembly, longitudinally of the airfoil. The ribs may be bi-cast onto a preformed airfoil side wall structure or fastened to the airfoil by an interlocking slide connection and/or welding. By attaching the nozzle ribs to the nozzle airfoil metal in such a way that allows play longitudinally of the airfoil, the temperature difference induced radial thermal stresses at the nozzle airfoil/rib joint area are reduced while maintaining proper mechanical support of the nozzle side walls.

  1. Antifouling marine concrete

    NASA Astrophysics Data System (ADS)

    Mathews, C. W.

    1980-03-01

    Various toxic agents were investigated for their ability to prevent the attachment and growth of marine fouling organisms on concrete. Three methods of incorporating antifoulants into concrete were also studied. Porous aggregate was impregnated with creosote and bis-(tri-n-butyltin) oxide (TBTO) and then used in making the concrete. Cuprous oxide, triphenyltin hydroxide (TPTH), and 2-2-bis-(p-methoxyphenyl)-1,1,1-trichloroethane (methoxychlor) were used as dry additives. Two proprietary formulations were applied as coatings on untreated concrete. Test specimens were exposed at Port Hueneme, Calif. and Key Biscayne, Fla. Efficacy of toxicants was determined by periodically weighing the specimens and the fouling organisms that became attached. Concrete prepared with an aggregate impregnated with a TBTO/creosote mixture demonstrated the best antifouling performance of those specimens exposed for more than 1 year. The two proprietary coatings and the concrete containing methoxychlor, TPTH, and cuprous oxide as dry additives have exhibited good antifouling properties but have been exposed for a shorter time. Also, the strength of concrete prepared using the toxicants was acceptable and the corrosion rate of reinforcing rods did not increase. The concentration of organotin compounds was essentially unchanged in a concrete specimen exposed 6-1/2 years in seawater.

  2. A rib-specific multimodal registration algorithm for fused unfolded rib visualization using PET/CT

    NASA Astrophysics Data System (ADS)

    Kaftan, Jens N.; Kopaczka, Marcin; Wimmer, Andreas; Platsch, Günther; Declerck, Jérôme

    2014-03-01

    Respiratory motion affects the alignment of PET and CT volumes from PET/CT examinations in a non-rigid manner. This becomes particularly apparent if reviewing fine anatomical structures such as ribs when assessing bone metastases, which frequently occur in many advanced cancers. To make this routine diagnostic task more efficient, a fused unfolded rib visualization for 18F-NaF PET/CT is presented. It allows to review the whole rib cage in a single image. This advanced visualization is enabled by a novel rib-specific registration algorithm that rigidly optimizes the local alignment of each individual rib in both modalities based on a matched filter response function. More specifically, rib centerlines are automatically extracted from CT and subsequently individually aligned to the corresponding bone-specific PET rib uptake pattern. The proposed method has been validated on 20 PET/CT scans acquired at different clinical sites. It has been demonstrated that the presented rib- specific registration method significantly improves the rib alignment without having to run complex deformable registration algorithms. At the same time, it guarantees that rib lesions are not further deformed, which may otherwise affect quantitative measurements such as SUVs. Considering clinically relevant distance thresholds, the centerline portion with good alignment compared to the ground truth improved from 60:6% to 86:7% after registration while approximately 98% can be still considered as acceptably aligned.

  3. Behavior of reinforcement SCC beams under elevated temperatures

    NASA Astrophysics Data System (ADS)

    Fathi, Hamoon; Farhang, Kianoosh

    2015-09-01

    This experimental study focuses on the behavior of heated reinforced concrete beams. Four types of concrete mixtures were used for the tested self-compacting concrete beams. A total of 72 reinforced concrete beams and 72 standard cylindrical specimens were tested. The compressive strength under uniaxial loading at 23 °C ranged from 30 to 45 MPa. The specimens were exposed to different temperatures. The test parameters of interest were the compressive strength and the temperature of the specimens. The effect of changes in the parameters was examined so as to control the behavior of the tested concrete and that of the reinforced concrete beam. The results indicated that flexibility and compressive strength of the reinforced concrete beams decreased at higher temperatures. Furthermore, heating beyond 400 °C produced greater variations in the structural behavior of the materials in both the cylindrical samples and the reinforced concrete beams.

  4. WRAP-RIB antenna technology development

    NASA Technical Reports Server (NTRS)

    Freeland, R. E.; Garcia, N. F.; Iwamoto, H.

    1985-01-01

    The wrap-rib deployable antenna concept development is based on a combination of hardware development and testing along with extensive supporting analysis. The proof-of-concept hardware models are large in size so they will address the same basic problems associated with the design fabrication, assembly and test as the full-scale systems which were selected to be 100 meters at the beginning of the program. The hardware evaluation program consists of functional performance tests, design verification tests and analytical model verification tests. Functional testing consists of kinematic deployment, mesh management and verification of mechanical packaging efficiencies. Design verification consists of rib contour precision measurement, rib cross-section variation evaluation, rib materials characterizations and manufacturing imperfections assessment. Analytical model verification and refinement include mesh stiffness measurement, rib static and dynamic testing, mass measurement, and rib cross-section characterization. This concept was considered for a number of potential applications that include mobile communications, VLBI, and aircraft surveillance. In fact, baseline system configurations were developed by JPL, using the appropriate wrap-rib antenna, for all three classes of applications.

  5. Delayed complication of a rib fracture.

    PubMed

    O'Kane, J; O'Kane, E; Marquet, J

    1998-04-01

    A 48-year-old man who was kneed in the chest while playing basketball was diagnosed as having an occult rib fracture. Five days after the injury, he was taken to the emergency room with severe midsternal and left upper quadrant and pleuritic chest pain. Left-side chest radiographs and CT scans revealed a pleural effusion, compression atelectasis, and a minimally displaced fracture of the sixth rib. A tube thoracostomy was performed, the pleural cavity was drained, and the patient recovered. His case illustrates the need to be alert for serious complications in apparently ordinary sports-related rib fractures.

  6. Antifouling marine concrete

    SciTech Connect

    Vind, H P; Mathews, C W

    1980-07-01

    Various toxic agents were evaluated as the their capability to prevent or inhibit the attachment of marine fouling organisms to concrete. Creosote and bis-(tri-n-butyltin) oxide (TBTO) were impregnated into porous aggregate which was used in making concrete. Cuprous oxide, triphenyltin hydroxide (TPTH), and 2-2-bis-(p-methoxyphenyl)-1,1,1-trichloroethane (methoxychlor) were used as dry additives. Two proprietary formulations were applied as coatings on untreated concrete. Test specimens were exposed at Port Hueneme, CA, and Key Biscayne, FL. The efficacy of toxicants was determined by periodically weighing the adhering fouling organisms. Concrete prepared with an aggregate impregnated with a TBTO/creosote mixture has demonstrated the best antifouling performance of those specimens exposed for more than one year. The two proprietary coatings and the concrete containing methoxychlor, TPTH, and cuprous oxide as dry additives have exhibited good antifouling properties, but they have been exposed for a shorter time. The strength of concrete containing the toxicants was acceptable, and the toxicants did not increase the corrosion rate of reinforcing rods. Organotin compounds were essentially unchanged in concrete specimens exposed 6 1/2 years in seawater.

  7. Antifouling marine concrete

    SciTech Connect

    Vind, H P; Mathews, C W

    1980-07-01

    Various toxic agents were evaluated as to their capability to prevent or inhibit the attachment of marine fouling organisms to concrete for OTEC plants. Creosote and bis-(tri-n-butyltin) oxide (TBTO) were impregnated into porous aggregate which was used in making concrete. Cuprous oxide, triphenyltin hydroxide (TPTH), and 2-2-bis-(p-methoxyphenyl)-1,1,1-trichloroethane (methoxychlor) were used as dry additives. Two proprietary formulations were applied as coatings on untreated concrete. Test specimens were exposed at Port Hueneme, CA, and Key Biscayne, FL. The efficacy of toxicants was determined by periodically weighing the adhering fouling organisms. Concrete prepared with an aggregate impregnated with a TBTO/creosote mixture has demonstrated the best antifouling performance of those specimens exposed for more than one year. The two proprietary coatings and the concrete containing methoxychlor, TPTH, and cuprous oxide as dry additives have exhibited good antifouling properties, but they have been exposed for a shorter time. The strength of concrete containing the toxicants was acceptable, and the toxicants did not increase the corrosion rate of reinforcing rods. Organotin compounds were essentially unchanged in concrete specimens exposed 6-1/2 years in seawater.

  8. [Spinal cord compression disclosing rib hydatidosis].

    PubMed

    Ousehal, A; Adil, A; El Azhari, A; Kadiri, R

    1995-12-01

    The authors report an exceptional case of spinal compression following an isolate rib hydatidosis. The CT scan has suspected the diagnosis. The authors recall the anatomoclinic features and specify the radiologic aspects of the osseous hydatidosis, especially the rib's localization which is very rare. MR imaging in addition of its diagnosis role showing a very evocative cyst images, is the exam of choice in order to appreciate the disease's extent and the degree of medular sufferance. PMID:8676297

  9. Supersonic Wing Optimization Using SpaRibs

    NASA Technical Reports Server (NTRS)

    Locatelli, David; Mulani, Sameer B.; Liu, Qiang; Tamijani, Ali Y.; Kapania, Rakesh K.

    2014-01-01

    This research investigates the advantages of using curvilinear spars and ribs, termed SpaRibs, to design a supersonic aircraft wing-box in comparison to the use of classic design concepts that employ straight spars and ribs. The objective is to achieve a more efficient load-bearing mechanism and to passively control the deformation of the structure under the flight loads. Moreover, the use of SpaRibs broadens the design space and allows for natural frequencies and natural mode shape tailoring. The SpaRibs concept is implemented in a new optimization MATLAB-based framework referred to as EBF3SSWingOpt. This optimization scheme performs both the sizing and the shaping of the internal structural elements, connecting the optimizer with the analysis software. The shape of the SpaRibs is parametrically defined using the so called Linked Shape method. Each set of SpaRibs is placed in a one by one square domain of the natural space. The set of curves is subsequently transformed in the physical space for creating the wing structure geometry layout. The shape of each curve of each set is unique; however, mathematical relations link the curvature in an effort to reduce the number of design variables. The internal structure of a High Speed Commercial Transport aircraft concept developed by Boeing is optimized subjected to stress, subsonic flutter and supersonic flutter constraints. The results show that the use of the SpaRibs allows for the reduction of the aircraft's primary structure weight without violating the constraints. A weight reduction of about 15 percent is observed.

  10. RIB Production at LNL: the EXOTIC Facility

    NASA Astrophysics Data System (ADS)

    Marco, Mazzocco

    2016-04-01

    Nuclear reactions involving radioactive isotopes are extremely relevant in several astrophysical scenarios, from the Big-Bang Nucleosynthesis to Supernovae explosions. In this contribution the production of Radioactive Ion Beams (RIBs) by means of the in-flight technique is reviewed. In particular, the use of direct reactions in inverse kinematics for the production of light weakly-bound RIBs by means of the facility EXOTIC at INFN-LNL (Italy) will be described in detail.

  11. Bilateral cervical ribs in a Dobermann Pinscher.

    PubMed

    Ricciardi, M; De Simone, A; Gernone, F; Giannuzzi, P

    2015-01-01

    An 11-year-old intact female Doberman Pinscher was presented with the complaint of non-ambulatory tetraparesis. Clinical and neurological examination revealed a caudal cervical spinal cord disfunction (C6-T2 spinal cord segments). Magnetic resonance imaging and computed tomographic (CT) findings of the cervical spine were consistent with caudal cervical spondylomyelopathy (CSM). During the diagnostic work-up for the cervical spine, bilateral bone anomalies involving the seventh cervical vertebra and the first ribs were found on radiographs and CT examination. The rib anomalies found in this dog appear similar to cervical ribs widely described in human medicine. In people, cervical ribs are associated with a high rate of stillbirth, early childhood cancer, and can cause the thoracic outlet syndrome, characterized by neurovascular compression at level of superior aperture of the chest. In dogs, only some sporadic anatomopathological descriptions of cervical ribs exist. In this report the radiographic and CT findings of these particular vertebral and rib anomalies along with their relationships with adjacent vasculature and musculature are shown intravitam in a dog. Specific radiographic and CT findings described in this report may help in reaching a presumptive diagnosis of this anomaly. Finally, their clinical and evolutionary significance are discussed.

  12. Sliding Couette flow in a ribbed annulus

    NASA Astrophysics Data System (ADS)

    Moradi, H. V.; Floryan, J. M.

    2016-07-01

    The flow in an annulus driven by the axial movement of one of the cylinders has been studied. The stationary cylinder has been fitted with axisymmetric ribs resulting in the appearance of the centrifugal-force-driven instability which leads to the formation of axial vortices. The critical stability conditions have been determined for a wide range of geometries of practical interest; these conditions include the critical Reynolds number as well as the best vortex packing. It has been shown that a sufficiently large increase of the ribs' wavelength leads to a flow stabilization as the flow becomes nearly rectilinear, thus reducing the strength of the centrifugal force field. It has also been demonstrated that a sufficiently large decrease of the ribs' wavelength similarly results in the flow stabilization as the stream lifts up above the ribs' peaks and becomes more rectilinear. Reduction of the annulus' radius leads to qualitatively different flow responses depending on the position of the moving cylinder. The critical Reynolds number is reduced and the range of the ribs' wave numbers capable of inducing the instability is increased when the outer cylinder drives the flow. The trend is reversed when the inner cylinder drives the flow. Conditions when the ribbed cylinder is unable to induce any instability and, thus, behaves as a hydraulically smooth cylinder have been identified.

  13. Prediction of Moisture Distribution in Closed Ribbed Panel for Roof

    NASA Astrophysics Data System (ADS)

    Kukule, A.; Rocens, K.

    2015-11-01

    Nowadays one of the possibilities to improve energy efficiency is the use of building elements with low air permeability, for example, sandwich panels with steel sheeting. However, these panels have one important disadvantage - a relatively small load-bearing capacity. This can be prevented by reinforcing the panel with antiseptized birch plywood ribs. For wood-based materials prediction of hygrothermal performance is important to avoid rot. Currently the methodology of ISO 13788:2012 is widely used assuming that moisture flux passes through the building envelope of any material. This assumption is not completely accurate with regard to a closed structure where no penetration of ambient humidity is possible. Therefore, in order to predict the distribution of moisture in such structure with the surfaces exposed to different temperatures and to assess the hazards of rot for plywood ribs, a methodology for closed building envelope is presented. To provide insight into expected results according to both methodologies, estimation for individual case with constant environmental conditions is given. According to the methodology for the closed building envelope no free water will occur. Therefore, it is believable that also no rot will be observed. This is contrary to the assessment according to the methodology of ISO 13788:2012, which predicts condensation.

  14. Performance of "Waterless Concrete"

    NASA Technical Reports Server (NTRS)

    Toutanji, H. A.; Grugel, R. N.

    2009-01-01

    Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in a lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and, by oxidation of the soil, iron and sulfur can be produced. Sulfur concrete specimens were cycled between liquid nitrogen (approx.]91 C) and room temperature (^21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (^21 C) and ^-101 C. Test results showed that due to temperature cycling, the compressive strength of cycled specimens was 20% of those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibres. The lunar regolith simulant was melted in a 25 cc Pt- Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to i hour. Glass fibres and small rods were pulled from the melt. The glass fibres were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Beams strengthened with glass fibres showed to exhibit an increase in the flexural strength by as much as 45%.

  15. Non Linear Step By Step Seismic Response and the Push Over Analysis Comparison of a Reinforced Concrete of Ductile Frames 25 Level Building

    NASA Astrophysics Data System (ADS)

    Avila, Jorge A.; Martinez, Eduardo

    2008-07-01

    Based on a ductile frames 25 level building, a non-linear analysis with increased monotonically lateral loads (Push-Over) was made in order to determine its collapse and its principal responses were compared against the time-history seismic responses determined with the SCT-EW-85 record. The seismic-resistance design and faced to gravitational loads was made according to the Complementary Technical Norms of Concrete Structures Design (NTC-Concrete) and the NTC-Seismic of the Mexico City Code (RDF-04), satisfying the limit service states (relative lateral displacement between story height maximum relations, story drifts ⩽0.012) and failure (seismic behavior factor, Q = 3). The compressible (soft) seismic zone IIIb and the office use type (group B) were considered. The non-lineal responses were determined with nominal and over-resistance effects. The comparison were made with base shear force-roof lateral displacement relations, global distribution of plastic hinges, failure mechanics tendency, lateral displacements and story drift and its distribution along the height of the building, local and global ductility demands, etc. For the non-linear static analysis with increased monotonically lateral loads, was important to select the type of lateral forces distribution.

  16. Comparative testing of nondestructive examination techniques for concrete structures

    NASA Astrophysics Data System (ADS)

    Clayton, Dwight A.; Smith, Cyrus M.

    2014-03-01

    A multitude of concrete-based structures are typically part of a light water reactor (LWR) plant to provide foundation, support, shielding, and containment functions. Concrete has been used in the construction of nuclear power plants (NPPs) because of three primary properties, its inexpensiveness, its structural strength, and its ability to shield radiation. Examples of concrete structures important to the safety of LWR plants include containment building, spent fuel pool, and cooling towers. Comparative testing of the various NDE concrete measurement techniques requires concrete samples with known material properties, voids, internal microstructure flaws, and reinforcement locations. These samples can be artificially created under laboratory conditions where the various properties can be controlled. Other than NPPs, there are not many applications where critical concrete structures are as thick and reinforced. Therefore, there are not many industries other than the nuclear power plant or power plant industry that are interested in performing NDE on thick and reinforced concrete structures. This leads to the lack of readily available samples of thick and heavily reinforced concrete for performing NDE evaluations, research, and training. The industry that typically performs the most NDE on concrete structures is the bridge and roadway industry. While bridge and roadway structures are thinner and less reinforced, they have a good base of NDE research to support their field NDE programs to detect, identify, and repair concrete failures. This paper will summarize the initial comparative testing of two concrete samples with an emphasis on how these techniques could perform on NPP concrete structures.

  17. Rib for blended wing-body aircraft

    NASA Technical Reports Server (NTRS)

    Hawley, Arthur V. (Inventor)

    1999-01-01

    Structural ribs for providing structural support for a structure, such as the pressure cabin of a blended-wing body aircraft. In a first embodiment, the ribs are generally Y-shaped, being comprised of a vertical web and a pair of inclined webs attached to the vertical web to extend upwardly and outwardly from the vertical web in different directions, with only the upper edges of the inclined webs being attached to a structural element. In a second embodiment, the ribs are generally trident-shaped, whereby the vertical web extends upwardly beyond the intersection of the inclined webs with the vertical web, with the upper edge of the vertical web as well as the upper edges of the inclined webs being attached to the same structural element.

  18. 12. VIEW, LOOKING EAST, SHOWING CLOSEUP OF ORIGINAL RIBS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. VIEW, LOOKING EAST, SHOWING CLOSEUP OF ORIGINAL RIBS OF THE VESSEL NEXT TO THE MORE MASSIVE NEW' RIBS - Motorized Sailing Vessel "Fox", Beached on East Bank ofBayou Lafourche, Larose, Lafourche Parish, LA

  19. Properties and uses of concrete, appendix B

    NASA Technical Reports Server (NTRS)

    Corley, Gene

    1992-01-01

    Concretes that can now be formed have properties which may make them valuable for lunar or space construction. These properties include high compressive strength, good flexural strength (when reinforced), and favorable responses to temperature extremes (even increased strength at low temperatures). These and other properties of concrete are discussed.

  20. Sequencing human ribs into anatomical order by quantitative multivariate methods.

    PubMed

    Cirillo, John; Henneberg, Maciej

    2012-06-01

    Little research has focussed on methods to anatomically sequence ribs. Correct anatomical sequencing of ribs assists in determining the location and distribution of regional trauma, age estimation, number of puncture wounds, number of individuals, and personal identification. The aim of the current study is to develop a method for placing fragmented and incomplete rib sets into correct anatomical position. Ribs 2-10 were used from eleven cadavers of an Australian population. Seven variables were measured from anatomical locations on the rib. General descriptive statistics were calculated for each variable along with an analysis of variance (ANOVA) and ANOVA with Bonferroni statistics. Considerable overlap was observed between ribs for univariate methods. Bivariate and multivariate methods were then applied. Results of the ANOVA with post hoc Bonferroni statistics show that ratios of various dimensions of a single rib could be used to sequence it within adjacent ribs. Using multiple regression formulae, the most accurate estimation of the anatomical rib number occurs when the entire rib is found in isolation. This however, is not always possible. Even when only the head and neck of the rib are preserved, a modified multivariate regression formula assigned 91.95% of ribs into correct anatomical position or as an adjacent rib. Using multivariate methods it is possible to sequence a single human rib with a high level of accuracy and they are superior to univariate methods. Left and right ribs were found to be highly symmetrical. Some rib dimensions were greater in males than in females, but overall the level of sexual dimorphism was low.

  1. Characterization of the centroidal geometry of human ribs.

    PubMed

    Kindig, Matthew W; Kent, Richard W

    2013-11-01

    While a number of studies have quantified overall ribcage morphology (breadth, depth, kyphosis/lordosis) and rib cross-sectional geometry in humans, few studies have characterized the centroidal geometry of individual ribs. In this study, a novel model is introduced to describe the centroidal path of a rib (i.e., the sequence of centroids connecting adjacent cross-sections) in terms of several physically-meaningful and intuitive geometric parameters. Surface reconstructions of rib levels 2-10 from 16 adult male cadavers (aged 31-75 years) were first extracted from CT scans, and the centroidal path was calculated in 3D for each rib using a custom numerical method. The projection of the centroidal path onto the plane of best fit (i.e., the "in-plane" centroidal path) was then modeled using two geometric primitives (a circle and a semiellipse) connected to give C1 continuity. Two additional parameters were used to describe the deviation of the centroidal path from this plane; further, the radius of curvature was calculated at various points along the rib length. This model was fit to each of the 144 extracted ribs, and average trends in rib size and shape with rib level were reported. In general, upper ribs (levels 2-5) had centroidal paths which were closer to circular, while lower ribs (levels 6-10) tended to be more elliptical; further the centroidal curvature at the posterior extremity was less pronounced for lower ribs. Lower ribs also tended to exhibit larger deviations from the best-fit plane. The rib dimensions and trends with subject stature were found to be consistent with findings previously reported in the literature. This model addresses a critical need in the biomechanics literature for the accurate characterization of rib geometry, and can be extended to a larger population as a simple and accurate way to represent the centroidal shape of human ribs.

  2. Four accessory (supernumerary) intrathoracic ribs: a case report.

    PubMed

    Prados, Jose; Archilla, Francisco; Melguizo, Consolación; Aranega, Antonia

    2013-09-01

    Accessory (supernumerary) intrathoracic ribs are a very rare congenital disorder. Here, we present the first case of multiple supernumerary intrathoracic ribs in an adult, which are present consecutively between ribs 1 and 4 and without articulation with the vertebrae. Despite this, anatomical variation is usually silent and accidentally discovered; its knowledge can prevent confusion with other structures during imaging diagnostic techniques of thoracic pathologies.

  3. Effect of zinc phosphate chemical conversion coating on corrosion behaviour of mild steel in alkaline medium: protection of rebars in reinforced concrete

    NASA Astrophysics Data System (ADS)

    Simescu, Florica; Idrissi, Hassane

    2008-12-01

    We outline the ability of zinc phosphate coatings, obtained by chemical conversion, to protect mild steel rebars against localized corrosion, generated by chloride ions in alkaline media. The corrosion resistance of coated steel, in comparison with uncoated rebars and coated and uncoated steel rebars embedded in mortar, were evaluated by open-circuit potential, potentiodynamic polarization, cronoamperometry and electrochemical impedance spectroscopy. The coated surfaces were characterized by x-ray diffraction and scanning electron microscopy. First, coated mild steel rebars were studied in an alkaline solution with and without chloride simulating a concrete pore solution. The results showed that the slow dissolution of the coating generates hydroxyapatite Ca10(PO4)6(OH)2. After a long immersion, the coating became dense and provided an effective corrosion resistance compared with the mild steel rebar. Secondly, the coated and uncoated steel rebars embedded in mortar and immersed in chloride solution showed no corrosion or deterioration of the coated steel. Corrosion rate is considerably lowered by this phosphate coating.

  4. Sonographic patterns of ribs with tumor involvement.

    PubMed

    Yang, G G; Wu, H D; Yang, P C; Kuo, S H; Luh, K T

    1991-02-01

    We analyzed the sonographic appearance of the ribs when there was tumor involvement in 16 patients (12 men and 4 women). The tumors included 11 carcinomas, 3 nonepithelial malignancies and 2 benign tumors. Three sonographic patterns on the cross section of abnormal ribs were identified. Pattern I was an eccentrical hyperechoic plate-like shadow inside a hypoechoic tumor. Pattern II was a round hyperechoic shadow or ring in the center of a hypoechoic tumor. Pattern III was a hypoechoic tumor only. The Pancoast tumor manifested pattern I. Metastatic cancer, mostly squamous cell carcinoma, manifested pattern II, and both malignant and benign tumors could manifest pattern III. In sonography, the margin and shape of the tumors, the change in the acoustic shadow of the rib and the pleural line did not differentiate the malignant tumors from benign tumors. When we routinely took a biopsy of these tumors under sonar guidance, the diagnostic yield was 100% without any complications. We conclude that the rib should be evaluated in chest sonography, and that pattern recognition and biopsy under sonar guidance are most useful.

  5. Method and apparatus for monitoring the thickness of a coal rib during rib formation

    DOEpatents

    Mowrey, Gary L.; Ganoe, Carl W.; Monaghan, William D.

    1996-01-01

    Apparatus for monitoring the position of a mining machine cutting a new entry in a coal seam relative to an adjacent, previously cut entry to determine the distance between a near face of the adjacent previously cut entry and a new face adjacent thereto of a new entry being cut by the mining machine which together define the thickness of a coal rib being formed between the new entry and the adjacent previously cut entry during the new entry-cutting operation. The monitoring apparatus; includes a transmit antenna mounted on the mining machine and spaced inwardly from the new face of the coal rib for transmitting radio energy towards the coal rib so that one portion of the radio energy is reflected by the new face which is defined at an air-coal interface between the new entry and the coal rib and another portion of the radio energy is reflected by the near face of the coal rib which is defined at an air-coal interface between the coal rib and the adjacent previously cut entry. A receive antenna mounted on the mining machine and spaced inwardly of the new face of the coal rib receives the one portion of the radio energy reflected by the new face and also receives the another portion of the radio energy reflected by the near face. A processor determines a first elapsed time period equal to the time required for the one portion of the radio energy reflected by the new face to travel between the transmit antenna and the receive antenna and also determines a second elapsed time period equal to the time required for the another portion of the radio energy reflected by the near face to travel between the transmit antenna and the receive antenna and thereafter calculates the thickness of the coal rib being formed as a function of the difference between the first and second elapsed time periods.

  6. Testing of plain and fibrous concrete single cavity prestressed concrete reactor vessel models

    SciTech Connect

    Oland, C.B.

    1985-01-01

    Two single-cavity prestressed concrete reactor vessel (PCRV) models were fabricated and tested to failure to demonstrate the structural response and ultimate pressure capacity of models cast from high-strength concretes. Concretes with design compressive strengths in excess of 70 MPa (10,000 psi) were developed for this investigation. One model was cast from plain concrete and failed in shear at the head region. The second model was cast from fiber reinforced concrete and failed by rupturing the circumferential prestressing at the sidewall of the structure. The tests also demonstrated the capabilities of the liner system to maintain a leak-tight pressure boundary. 3 refs., 4 figs.

  7. Chondral Rib Fractures in Professional American Football

    PubMed Central

    McAdams, Timothy R.; Deimel, Jay F.; Ferguson, Jeff; Beamer, Brandon S.; Beaulieu, Christopher F.

    2016-01-01

    Background: Although a recognized and discussed injury, chondral rib fractures in professional American football have not been previously reported in the literature. There currently exists no consensus on how to identify and treat these injuries or the expected return to play for the athlete. Purpose: To present 2 cases of chondral rib injuries in the National Football League (NFL) and discuss the current practice patterns for management of these injuries among the NFL team physicians. Study Design: Case series; Level of evidence, 4. Methods: Two cases of NFL players with chondral rib injuries are presented. A survey regarding work-up and treatment of these injuries was completed by team physicians at the 2014 NFL Combine. Our experience in identifying and treating these injuries is presented in conjunction with a survey of NFL team physicians’ experiences. Results: Two cases of rib chondral injuries were diagnosed by computed tomography (CT) and treated with rest and protective splinting. Return to play was 2 to 4 weeks. NFL Combine survey results show that NFL team physicians see a mean of 4 costal cartilage injuries per 5-year period, or approximately 1 case per year per team. Seventy percent of team physicians use CT scanning and 43% use magnetic resonance imaging for diagnosis of these injuries. An anesthetic block is used acutely in 57% and only electively in subsequent games by 39%. Conclusion: A high index of suspicion is necessary to diagnose chondral rib injuries in American football. CT scan is most commonly used to confirm diagnosis. Return to play can take up to 2 to 4 weeks with a protective device, although anesthetic blocks can be used to potentially expedite return. Clinical Relevance: Chondral rib injuries are common among NFL football players, while there is no literature to support proper diagnosis and treatment of these injuries or expected duration of recovery. These injuries are likely common in other contact sports and levels of

  8. Chondromyxoid fibroma of the second rib.

    PubMed

    Long, Kristin L; Absher, Kimberly J; Draus, John M

    2013-06-01

    Chondromyxoid fibromas are benign tumors which are found most frequently in the metaphyses of long bones. They comprise less than 1% of primary bone neoplasms and display a hypermetabolic appearance on PET imaging. Oftentimes, they are misdiagnosed as chondrosarcomas and are excised due to concern for malignancy. We present a case of a condromyxoid fibroma originating from the second rib of a 15-year-old girl. PMID:23845646

  9. A Study on the Cover Failure in Concrete Structure Following Concrete Deterioration

    SciTech Connect

    Choo, Y.H.; Lee, Y.H.; Lee, C.M.; Lee, K.J.

    2008-07-01

    The RC (Reinforced Concrete) structures in the spent fuel dry storage is required structural integrity for a long period of the service life time. A study on the concrete cracking behavior by stress on concrete is necessary for life time estimation of structures because concrete cracking can reduce the radiation shielding performance and deteriorate the durability of spent fuel dry storage. The purpose of this study is to analyze the relationship between the range of the steel expansion and the crack creation and propagation using the ABAQUS tool. Parameters used in this study were concrete strength, concrete cover depth and the steel diameter. The value of steel radius to volume expansion was applied to suppose the expansion of reinforcing bar under the load condition. As a result of this case study, it is confirmed that the critical steel expansion which can initiate cracking is proportional to tensile strength. And primary factors which effect crack creation of concrete cover are in order of concrete strength, cover thickness and steel diameter. If concrete strength is lowered about its 30%, the rate of surface crack occurrence accelerates 15 times maximally. The critical expansion value of steel increased as the increment of concrete cover depth. The surface cracking of concrete cover was created at the value of steel expansion, ranging from 0.019 to 0.051 mm under the cover depth 50 mm. (authors)

  10. Electroosmotic decontamination of concrete

    SciTech Connect

    Bostick, W.D.; Bush, S.A.; Marsh, G.C.; Henson, H.M.; Box, W.D.; Morgan, I.L.

    1993-03-01

    A method is described for the electroosmotic decontamination of concrete surfaces, in which an electrical field is used to induce migration of ionic contaminants from porous concrete into an electrolyte solution that may be disposed of as a low-level liquid radioactive waste (LLRW); alternately, the contaminants from the solution can be sorbed onto anion exchange media in order to prevent contaminant buildup in the solution and to minimize the amount of LLRW generated. We have confirmed the removal of uranium (and infer the removal of {sup 99}Tc) from previously contaminated concrete surfaces. In a typical experimental configuration, a stainless steel mesh is placed in an electrolyte solution contained within a diked cell to serve as the negative electrode (cathode) and contaminant collection medium, respectively, and an existing metal penetration (e.g., piping, conduit, or rebar reinforcement within the concrete surface) serves as the positive electrode (anode) to complete the cell. Typically we have achieved 70 to >90% reductions in surface activity by applying <400 V and <1 A for 1--3 h (energy consumption of 0.4--12 kWh/ft{sup 2}).

  11. Geopolymer concrete for structural use: Recent findings and limitations

    NASA Astrophysics Data System (ADS)

    Nuruddin, M. F.; Malkawi, A. B.; Fauzi, A.; Mohammed, B. S.; Almattarneh, H. M.

    2016-06-01

    Geopolymer binders offer a possible solution for several problems that facing the current cement industry. These binders exhibit similar or better engineering properties compared to cement and can utilize several types of waste materials. This paper presents the recent research progress regarding the structural behaviour of reinforced geopolymer concrete members including beams, columns and slabs. The reported results showed that the structural behaviour of the reinforced geopolymer concrete members is similar to the known behaviour of the ordinary reinforced concrete members. In addition, the currently available standards have been conservatively used for analysis and designing of reinforced geopolymer concrete structures. On the other hand, the main hurdles facing the spread of geopolymer concrete was the absence of standards and the concerns about the long-term properties. Other issues included the safety, cost and liability.

  12. Effects of mean flow on transmission loss of orthogonally rib-stiffened aeroelastic plates.

    PubMed

    Xin, F X; Lu, T J

    2013-06-01

    This paper investigates the sound transmission loss (STL) of aeroelastic plates reinforced by two sets of orthogonal rib-stiffeners in the presence of external mean flow. Built upon the periodicity of the structure, a comprehensive theoretical model is developed by considering the convection effect of mean flow. The rib-stiffeners are modeled by employing the Bernoulli-Euler beam theory and the torsional wave equation. While the solution for the transmission loss of the structure based on plate displacement and acoustic pressures is given in the form of space-harmonic series, the corresponding coefficients are obtained from the solution of a system of linear equations derived from the plate-beam coupling vibration governing equation and Helmholtz equation. The model predictions are validated by comparing with existing theoretical and experimental results in the absence of mean flow. A parametric study is subsequently performed to quantify the effects of mean flow as well as structure geometrical parameters upon the transmission loss. It is demonstrated that the transmission loss of periodically rib-stiffened structure is increased significantly with increasing Mach number of mean flow over a wide frequency range. The STL value for the case of sound wave incident downstream is pronouncedly larger than that associated with sound wave incident upstream. PMID:23742345

  13. Prompt gamma analysis of chlorine in concrete for corrosion study.

    PubMed

    Naqvi, A A; Nagadi, M M; Al-Amoudi, O S B

    2006-02-01

    Measurement of chlorine in concrete is very important for studying of corrosion of reinforcing steel in concrete. Corrosion of reinforcing steel is primarily ascribed to the penetration of chloride ions to the steel surface. Preventive measures for avoiding concrete structure reinforcement corrosion requires monitoring the chloride ion concentration in concrete so that its concentration does not exceed a threshold limit to initiate reinforcement concrete corrosion. An accelerator based prompt gamma neutron activation analysis (PGNAA) setup has been developed for non-destructive analysis of elemental composition of concrete samples. The setup has been used to measure chlorine concentration in concrete samples over a 1-3 wt% concentration range. Although a strong interference has been observed between the chlorine gamma-rays and calcium gamma-rays from concrete, the chlorine concentration in concrete samples has been successfully measured using the 1.164 and 7.643 MeV chlorine gamma-rays. The experimental data were compared with the results of the Monte Carlo simulations. An excellent agreement has been achieved between the experimental data and results of Monte Carlo simulations. The study has demonstrated the successful use of the accelerator-based PGNAA setup in non-destructive analysis of chlorine in concrete samples. PMID:16129605

  14. Automatic three-dimensional rib centerline extraction from CT scans for enhanced visualization and anatomical context

    NASA Astrophysics Data System (ADS)

    Ramakrishnan, Sowmya; Alvino, Christopher; Grady, Leo; Kiraly, Atilla

    2011-03-01

    We present a complete automatic system to extract 3D centerlines of ribs from thoracic CT scans. Our rib centerline system determines the positional information for the rib cage consisting of extracted rib centerlines, spinal canal centerline, pairing and labeling of ribs. We show an application of this output to produce an enhanced visualization of the rib cage by the method of Kiraly et al., in which the ribs are digitally unfolded along their centerlines. The centerline extraction consists of three stages: (a) pre-trace processing for rib localization, (b) rib centerline tracing, and (c) post-trace processing to merge the rib traces. Then we classify ribs from non-ribs and determine anatomical rib labeling. Our novel centerline tracing technique uses the Random Walker algorithm to segment the structural boundary of the rib in successive 2D cross sections orthogonal to the longitudinal direction of the ribs. Then the rib centerline is progressively traced along the rib using a 3D Kalman filter. The rib centerline extraction framework was evaluated on 149 CT datasets with varying slice spacing, dose, and under a variety of reconstruction kernels. The results of the evaluation are presented. The extraction takes approximately 20 seconds on a modern radiology workstation and performs robustly even in the presence of partial volume effects or rib pathologies such as bone metastases or fractures, making the system suitable for assisting clinicians in expediting routine rib reading for oncology and trauma applications.

  15. Detection and labeling ribs on expiration chest radiographs

    NASA Astrophysics Data System (ADS)

    Park, Mira; Jin, Jesse S.; Wilson, Laurence S.

    2003-06-01

    Typically, inspiration is preferred when xraying the lungs. The x-ray technologist will ask a patient to be still and to take a deep breath and to hold it. This not only reduces the possibility of a blurred image but also enhances the quality of the image since air-filled lungs are easier to see on x-ray film. However, inspiration causes low density in the inner part of lung field. That means that ribs in the inner part of lung field have lower density than the other parts nearer to the border of the lung field. That is why edge detection algorithms often fail to detect ribs. Therefore to make rib edges clear we try to produce an expiration lung field using a 'hemi-elliptical cavity.' Based on the expiration lung field, we extract the rib edges using canny edge detector and a new connectivity method, called '4 way with 10-neighbors connectivity' to detect clavicle and rib edge candidates. Once the edge candidates are formed, our system selects the best candidates using knowledge-based constraints such as a gradient, length and location. The edges can be paired and labeled as superior rib edge and inferior rib edge. Then the system uses the clavicle, which is obtained in a same method for the rib edge detection, as a landmark to label all detected ribs.

  16. Protecting steel in concrete in the Persian Gulf

    SciTech Connect

    Matta, Z.G. )

    1994-06-01

    The climate and geomorphology of the Persian Gulf make it one of the world's most severe environments for reinforced concrete. The concrete mix ingredients are usually contaminated with chloride, and the environment around reinforced concrete structures also contains salts, both under- and above-ground. Prevailing high temperatures also promote rapid rates of corrosion. Fusion-bonded epoxy-coated rebar, polyvinyl butyral-based coated rebar, calcium nitrile corrosion-inhibiting admixture, and microsilica are reviewed as corrosion prevention measures for steel in concrete for Persian Gulf service. Detrimental effects and user-friendliness are discussed.

  17. Universal design curves for rib waveguides

    NASA Astrophysics Data System (ADS)

    Dagli, Nadir; Fonstad, Clifton G.

    1988-06-01

    A method of analysis which results in a modular microwave equivalent circuit representation for open guided-wave structures is applied to the analysis of rib guides. Accurate design information valid over the range of parameters typically encountered in integrated optics is plotted in a universal format. Analytical design rules which are valid over certain ranges of parameters are also given. Commonly used approximate analysis techniques are considered for comparison purposes, and the shortcomings of these techniques and the ranges over which they can be used satisfactorily are pointed out.

  18. Cantilever rib grafting in salvage rhinoplasty.

    PubMed

    Shubailat, Ghaith F

    2003-01-01

    Loss of nasal skeletal support, whether congenital, following trauma or secondary to multiple failed surgeries, calls for reconstruction aiming at restoring rigid dorsal stability, maintaining tip projection, and restoring respiratory function. Where septal and conchal grafts are inadequate to be used as building blocks, our procedure of choice has been the cantilever osseocartilagenous rib graft with microscrew fixation. In the past 10 years, 48 patients were candidates for this salvage procedure. Long-term functional and cosmetic results have been highly satisfactory. PMID:15058550

  19. Husbandry of Spanish ribbed newts (Pleurodeles waltl).

    PubMed

    Joven, Alberto; Kirkham, Matthew; Simon, András

    2015-01-01

    Research on urodele amphibians, such as newts, is constantly contributing to our understanding of fundamental biological processes. In the present chapter, we present detailed husbandry protocols for the Spanish ribbed newt (Pleurodeles waltl ). We describe the main phases of their life cycle, with emphasis on the progressive development of sensory, motor, and integration systems, which lead to the acquisition of specific stereotyped (and conditioned) behaviors. The methods are outlined to manage housing, feeding, handling, captive breeding, health monitoring, and euthanasia in this species under laboratory conditions. With minor changes, these protocols can also be applied to other species of urodele amphibians commonly used in laboratory research.

  20. Study of wrap-rib antenna design

    NASA Technical Reports Server (NTRS)

    Wade, W. D.; Sinha, A.; Singh, R.

    1979-01-01

    The results of a parametric design study conducted to develop the significant characteristics and technology limitations of space deployable antenna systems with aperture sizes ranging from 50 up to 300 m and F/D ratios between 0.5 and 3.0 are presented. Wrap/rib type reflectors of both the prime and offset fed geometry and associated feed support structures were considered. The significant constraints investigated as limitations on achievable aperture were inherent manufacturability, orbit dynamic and thermal stability, antenna weight, and antenna stowed volume. A data base, resulting in the defined maximum achievable aperture size as a function of diameter, frequency and estimated cost, was formed.

  1. Bacterial concrete

    NASA Astrophysics Data System (ADS)

    Ramakrishnan, Venkataswamy; Ramesh, K. P.; Bang, S. S.

    2001-04-01

    Cracks in concrete are inevitable and are one of the inherent weaknesses of concrete. Water and other salts seep through these cracks, corrosion initiates, and thus reduces the life of concrete. So there was a need to develop an inherent biomaterial, a self-repairing material which can remediate the cracks and fissures in concrete. Bacterial concrete is a material, which can successfully remediate cracks in concrete. This technique is highly desirable because the mineral precipitation induced as a result of microbial activities is pollution free and natural. As the cell wall of bacteria is anionic, metal accumulation (calcite) on the surface of the wall is substantial, thus the entire cell becomes crystalline and they eventually plug the pores and cracks in concrete. This paper discusses the plugging of artificially cracked cement mortar using Bacillus Pasteurii and Sporosarcina bacteria combined with sand as a filling material in artificially made cuts in cement mortar which was cured in urea and CaCl2 medium. The effect on the compressive strength and stiffness of the cement mortar cubes due to the mixing of bacteria is also discussed in this paper. It was found that use of bacteria improves the stiffness and compressive strength of concrete. Scanning electron microscope (SEM) is used to document the role of bacteria in microbiologically induced mineral precipitation. Rod like impressions were found on the face of calcite crystals indicating the presence of bacteria in those places. Energy- dispersive X-ray (EDX) spectra of the microbial precipitation on the surface of the crack indicated the abundance of calcium and the precipitation was inferred to be calcite (CaCO3).

  2. Electro-osmotic techniques for removal of chloride from concrete and for emplacement of concrete sealants

    NASA Astrophysics Data System (ADS)

    Jayaprakash, G. P.; Bukovatz, J. E.; Ramamurti, K.; Gilliland, W. J.

    1982-08-01

    Chloride ion from bridge deck concrete can be removed by application of a direct current potential between bridge reinforcing steel (-) and a copper screen (+) conductor on the bridge surface. Soaring prices of all types of energy would make removal of all chloride prohibitatively expensive. The importance of verification of all electrical connections prior to the treatment is emphasized by the demonstration of concrete cracking when the steel was made a positive instead of a negative electrode. Data on effectiveness of calcium nitrite corrosion inhibitor added to the concrete overlay placed on electrotreated concrete is not extensive due to accidental damage to the test slabs.

  3. Concrete Waste Recycling Process for High Quality Aggregate

    SciTech Connect

    Ishikura, Takeshi; Fujii, Shin-ichi

    2008-01-15

    Large amount of concrete waste generates during nuclear power plant (NPP) dismantling. Non-contaminated concrete waste is assumed to be disposed in a landfill site, but that will not be the solution especially in the future, because of decreasing tendency of the site availability and natural resources. Concerning concrete recycling, demand for roadbeds and backfill tends to be less than the amount of dismantled concrete generated in a single rural site, and conventional recycled aggregate is limited of its use to non-structural concrete, because of its inferior quality to ordinary natural aggregate. Therefore, it is vital to develop high quality recycled aggregate for general uses of dismantled concrete. If recycled aggregate is available for high structural concrete, the dismantling concrete is recyclable as aggregate for industry including nuclear field. Authors developed techniques on high quality aggregate reclamation for large amount of concrete generated during NPP decommissioning. Concrete of NPP buildings has good features for recycling aggregate; large quantity of high quality aggregate from same origin, record keeping of the aggregate origin, and little impurities in dismantled concrete such as wood and plastics. The target of recycled aggregate in this development is to meet the quality criteria for NPP concrete as prescribed in JASS 5N 'Specification for Nuclear Power Facility Reinforced Concrete' and JASS 5 'Specification for Reinforced Concrete Work'. The target of recycled aggregate concrete is to be comparable performance with ordinary aggregate concrete. The high quality recycled aggregate production techniques are assumed to apply for recycling for large amount of non-contaminated concrete. These techniques can also be applied for slightly contaminated concrete dismantled from radiological control area (RCA), together with free release survey. In conclusion: a technology on dismantled concrete recycling for high quality aggregate was developed

  4. Tapered rib fiber coupler for semiconductor optical devices

    DOEpatents

    Vawter, Gregory A.; Smith, Robert Edward

    2001-01-01

    A monolithic tapered rib waveguide for transformation of the spot size of light between a semiconductor optical device and an optical fiber or from the fiber into the optical device. The tapered rib waveguide is integrated into the guiding rib atop a cutoff mesa type semiconductor device such as an expanded mode optical modulator or and expanded mode laser. The tapered rib acts to force the guided light down into the mesa structure of the semiconductor optical device instead of being bound to the interface between the bottom of the guiding rib and the top of the cutoff mesa. The single mode light leaving or entering the output face of the mesa structure then can couple to the optical fiber at coupling losses of 1.0 dB or less.

  5. Application of Composite Mechanics to Composites Enhanced Concrete Structures

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.; Gotsis, Pascal K.

    2006-01-01

    A new and effective method is described to design composites to repair damage or enhance the overload strength of concrete infrastructures. The method is based on composite mechanics which is available in computer codes. It is used to simulate structural sections made from reinforced concrete which are typical in infrastructure as well as select reinforced concrete structures. The structural sections are represented by a number of layers through the thickness where different layers are used in concrete, and for the composite. The reinforced concrete structures are represented with finite elements where the element stiffness parameters are from the structural sections which are represented by composite mechanics. The load carrying capability of the structure is determined by progressive structural fracture. Results show up to 40 percent improvements for damage and for overload enhancement with relatively small laminate thickness for the structural sections and up to three times for the composite enhanced select structures (arches and domes).

  6. Performance variances of galvanized steel in mortar and concrete

    SciTech Connect

    Hime, W.G. . Hime Division of Wiss, Janney, Elstner Associates); Machin, M. )

    1993-10-01

    Mild steel is used as reinforcement in concrete structures because it is passivated by the highly alkaline cement paste system, preventing typical corrosion. Two processes can corrode the initially passivated steel: air carbonation and chloride (Cl[sup [minus

  7. Hysteretic behavior of prestressed concrete bridge pier with fiber model.

    PubMed

    Wang, Hui-li; Feng, Guang-qi; Qin, Si-feng

    2014-01-01

    The hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier were researched. The effects of the prestressed tendon ratio, the longitudinal reinforcement ratio, and the stirrup reinforcement ratio on the hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier have been obtained with the fiber model analysis method. The analysis show some results about the prestressed concrete bridge pier. Firstly, greater prestressed tendon ratio and more longitudinal reinforcement can lead to more obvious pier's hysteresis loop "pinching effect," smaller residual displacement, and lower energy dissipation capacity. Secondly, the greater the stirrup reinforcement ratio is, the greater the hysteresis loop area is. That also means that bridge piers will have better ductility and stronger shear capacity. The results of the research will provide a theoretical basis for the hysteretic behavior analysis of the prestressed concrete pier. PMID:24578635

  8. Hysteretic behavior of prestressed concrete bridge pier with fiber model.

    PubMed

    Wang, Hui-li; Feng, Guang-qi; Qin, Si-feng

    2014-01-01

    The hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier were researched. The effects of the prestressed tendon ratio, the longitudinal reinforcement ratio, and the stirrup reinforcement ratio on the hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier have been obtained with the fiber model analysis method. The analysis show some results about the prestressed concrete bridge pier. Firstly, greater prestressed tendon ratio and more longitudinal reinforcement can lead to more obvious pier's hysteresis loop "pinching effect," smaller residual displacement, and lower energy dissipation capacity. Secondly, the greater the stirrup reinforcement ratio is, the greater the hysteresis loop area is. That also means that bridge piers will have better ductility and stronger shear capacity. The results of the research will provide a theoretical basis for the hysteretic behavior analysis of the prestressed concrete pier.

  9. Hysteretic Behavior of Prestressed Concrete Bridge Pier with Fiber Model

    PubMed Central

    Hui-li, Wang; Guang-qi, Feng; Si-feng, Qin

    2014-01-01

    The hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier were researched. The effects of the prestressed tendon ratio, the longitudinal reinforcement ratio, and the stirrup reinforcement ratio on the hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier have been obtained with the fiber model analysis method. The analysis show some results about the prestressed concrete bridge pier. Firstly, greater prestressed tendon ratio and more longitudinal reinforcement can lead to more obvious pier's hysteresis loop “pinching effect,” smaller residual displacement, and lower energy dissipation capacity. Secondly, the greater the stirrup reinforcement ratio is, the greater the hysteresis loop area is. That also means that bridge piers will have better ductility and stronger shear capacity. The results of the research will provide a theoretical basis for the hysteretic behavior analysis of the prestressed concrete pier. PMID:24578635

  10. Ultrasonic testing of reactive powder concrete.

    PubMed

    Washer, Glenn; Fuchs, Paul; Graybeal, Benjamin A; Hartmann, Joseph Lawrence

    2004-02-01

    Concrete is a critical material for the construction of infrastructure facilities throughout the world. Traditional concretes consist of cement paste and aggregates ranging in size from 6 to 25 mm that form a heterogeneous material with substantial compressive strength and a very low tensile strength. Steel reinforcement is used to provide tensile strength for reinforced concrete structures and as a composite the material is useful for structural applications. A new material known as reactive powder concrete (RPC) is becoming available. It differs significantly from traditional concrete; RPC has no large aggregates, and contains small steel fibers that provide additional strength and, in some cases, can replace traditional steel reinforcement. Due to its high density and lack of aggregates, ultrasonic inspections at frequencies 10 to 20 times that of traditional concrete inspections are possible. This paper reports on the initial findings of research conducted to determine the applicability of ultrasonic testing techniques for the condition assessment of RPC. Pulse velocities for shear and longitudinal waves and ultrasonic measurement of the modulus of elasticity for RPC are reported. Ultrasonic crack detection for RPC also is investigated. PMID:15055809

  11. Methods for ultimate load analysis of concrete containments

    SciTech Connect

    Dunham, R.S.; Rashid, Y.R.; Yuan, K.A.; Lu, Y.M.

    1985-06-01

    The objective of the research project described in this interim report is to develop a qualified methodology for the ultimate load analysis of concrete containment structures. The EPRI-sponsored nonlinear finite element code ABAQUS-EPGEN, which has recently been modified to incorporate a constitutive model for plain concrete and modeling capabilities for reinforced and prestressed concrete containments, is utilized as the structural analysis tool in this development. The ABAQUS-EPGEN concrete modeling and analysis capabilities are first evaluated by comparing measured data with code predictions for full-scale reinforced concrete slab specimens tested under uniaxial and biaxial tension. These specimen tests simulate the behavior of the cylindrical wall of a typical concrete containment structure under internal pressure. The calculated and measured strain comparisons are used to improve the constitutive model and to qualify the code for concrete containment analysis. The second part of this effort deals with the ultimate load analysis of reinforced and prestressed containments to determine bounds on the global overpressure capacities of typical concrete containment structures. The third part of this effort further examines such local effects through a substructural analysis of the liner-concrete interaction at major concrete cracks.

  12. Detection and localization of rib detachment in thin metal and composite plates by inversion of laser Doppler vibrometry scans.

    PubMed

    Romano, Anthony J; Bucaro, Joseph A; Vignola, Joseph F; Abraham, Phillip B

    2007-05-01

    The laboratory implementation of a fault detection and localization method based on inversion of dynamic surface displacements measured by a scanned laser Doppler vibrometer (SLDV) was investigated. The technique uses flexural wave and generalized force inversion algorithms which have previously been demonstrated using simulated noise-free vibration data generated for thick plates with a finite element model. Here these inversion algorithms to SLDV measurements made in the laboratory on a thin nickel plate and a thin carbon fiber composite plate, both having attached reinforcing ribs with intentional de-bonding of the rib/plate interface at a specific location on each structure are applied. The inverted displacement maps clearly detect and locate the detachment, whereas direct observation of the surface displacements does not. It is shown that the technique is relatively robust to the choice of frequency and to the presence of noise.

  13. Controlling chloride ions diffusion in concrete.

    PubMed

    Zeng, Lunwu; Song, Runxia

    2013-11-28

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle.

  14. Controlling chloride ions diffusion in concrete

    PubMed Central

    Zeng, Lunwu; Song, Runxia

    2013-01-01

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle. PMID:24285220

  15. Nuclear Physics with RIB's: How it all started

    NASA Astrophysics Data System (ADS)

    Tanihata, Isao

    2016-04-01

    Neutron halos were discovered through measurements of interaction cross sections and fragmentation cross sections of nuclei near the neutron drip line. Such measurements became possible with the use of radioactive ion beams (RIBs) produced though projectile fragmentations of high-energy heavy-ion collisions. RIBs were invented 30 years ago at the Bevalac facility in Berkeley. In this article, I describe how they were invented and how neutron halos were discovered. What happened at that time was a series of small serendipities guiding us to the present prosperous field of RIB science.

  16. Fibre-Reinforced Adhesive for Structure Anchoring

    NASA Astrophysics Data System (ADS)

    Barnat, J.; Bajer, M.

    2015-11-01

    The topic of this paper is the glue-concrete interface of bonded anchors loaded by tension force. The paper is closely focused on bond strength experiments using high strength concrete up to class C50/60 or higher together with pure epoxy resin and fibre-reinforced resin. The goal of this research is to find the limits of the effective use of such glue types in high performance concrete, and also to verify the most commonly used design methods for bonded anchors. The presented research includes experimental analysis of the glue-concrete interface and the influence of its parameters on anchor behaviour. The presented analysis shows some problems of the 'separated failure modes' approach and also presents experimentally verified bond strength values obtained for the currently most widespread glue types. Results of fibre reinforced epoxy resin are also presented in this paper.

  17. 78 FR 24780 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Concrete...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-26

    ... Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Concrete... National Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et seq. (``the Act''), Concrete... principal place of business of the standards development organization is Concrete Reinforcing...

  18. 149. Credit JE. Using wooden forms and wire reinforcing to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    149. Credit JE. Using wooden forms and wire reinforcing to construct concrete portion of inverted siphon #2 on Coleman Canal. (JE, v. 27 1911 p. 413). - Battle Creek Hydroelectric System, Battle Creek & Tributaries, Red Bluff, Tehama County, CA

  19. Effect of rib angle on local heat/mass transfer distribution in a two-pass rib-roughened channel

    NASA Technical Reports Server (NTRS)

    Chandra, P. R.; Han, J. C.; Lau, S. C.

    1987-01-01

    The naphthalene sublimation technique is used to investigate the heat transfer characteristics of turbulent air flow in a two-pass channel. A test section that resembles the internal cooling passages of gas turbine airfoils is employed. The local Sherwood numbers on the ribbed walls were found to be 1.5-6.5 times those for a fully developed flow in a smooth square duct. Depending on the rib angle-of-attack and the Reynolds number, the average ribbed-wall Sherwood numbers were 2.5-3.5 times higher than the fully developed values.

  20. Shrinkage deformation of cement foam concrete

    NASA Astrophysics Data System (ADS)

    Kudyakov, A. I.; Steshenko, A. B.

    2015-01-01

    The article presents the results of research of dispersion-reinforced cement foam concrete with chrysotile asbestos fibers. The goal was to study the patterns of influence of chrysotile asbestos fibers on drying shrinkage deformation of cement foam concrete of natural hardening. The chrysotile asbestos fiber contains cylindrical fiber shaped particles with a diameter of 0.55 micron to 8 microns, which are composed of nanostructures of the same form with diameters up to 55 nm and length up to 22 microns. Taking into account the wall thickness, effective reinforcement can be achieved only by microtube foam materials, the so- called carbon nanotubes, the dimensions of which are of power less that the wall pore diameter. The presence of not reinforced foam concrete pores with perforated walls causes a decrease in its strength, decreases the mechanical properties of the investigated material and increases its shrinkage. The microstructure investigation results have shown that introduction of chrysotile asbestos fibers in an amount of 2 % by weight of cement provides the finely porous foam concrete structure with more uniform size closed pores, which are uniformly distributed over the volume. This reduces the shrinkage deformation of foam concrete by 50%.