Chandel, Siddhartha; Khan, Mohsin Ali; Singh, Nishi; Agrawal, Amiya; Khare, Vinita
2017-01-01
Present study is designed to explore the effect of sodium bicarbonate oral rinse on salivary pH and oral micro flora. Twenty five healthy subjects were recruited for the study in department of dentistry in Era Medical College. Subjects were abstained from tooth brushing overnight pre rinse (control) samples were collected after one hour of dinner and were asked to rinse with pre calibrated freshly prepared sodium bicarbonate solution. The salivary samples were then collected the following morning using sterile gauze in marked bottles. Aerobic bacterial culture was done by plating the sample directly from the swab on the surface of Blood agar and Mac Conkeys media respectively. The colony forming units and ph were calculated for the pre rinse and post rinse saliva sample. Results shows that salivary pH increased significantly after sodium Bicarbonate oral rinse. There was a marginal decrease in number of CFU/ml for bacteria especially Viridans Streptococci, Moraxella species. Sodium Bicarbonate oral rinse may be considered as a cheap and effective alternative for chlorhexidine and alcohol based mouth wash, especially where long duration usage is required.
Berghaus, Roy D; Thayer, Stephan G; Law, Bibiana F; Mild, Rita M; Hofacre, Charles L; Singer, Randall S
2013-07-01
A prospective cohort study was performed to evaluate the prevalences and loads of Salmonella and Campylobacter spp. in farm and processing plant samples collected from 55 commercial broiler chicken flocks. Environmental samples were collected from broiler houses within 48 h before slaughter, and carcass rinses were performed on birds from the same flocks at 4 different stages of processing. Salmonella was detected in farm samples of 50 (90.9%) flocks and in processing samples of 52 (94.5%) flocks. Campylobacter was detected in farm samples of 35 (63.6%) flocks and in processing samples of 48 (87.3%) flocks. There was a significant positive relationship between environmental farm samples and processing plant carcass rinses with respect to both Salmonella and Campylobacter prevalences and loads. Campylobacter loads were significantly higher than Salmonella loads, and the correlations between samples collected from the same flocks were higher for Campylobacter than they were for Salmonella. Boot socks were the most sensitive sample type for detection of Salmonella on the farm, whereas litter samples had the strongest association with Salmonella loads in pre- and postchill carcass rinses. Boot socks, drag swabs, and fecal samples all had similar sensitivities for detecting Campylobacter on the farm, and all were more strongly associated with Campylobacter loads in carcass rinses than were litter samples. Farm samples explained a greater proportion of the variability in carcass rinse prevalences and loads for Campylobacter than they did for Salmonella. Salmonella and Campylobacter prevalences and loads both decreased significantly as birds progressed through the processing plant.
Thayer, Stephan G.; Law, Bibiana F.; Mild, Rita M.; Hofacre, Charles L.; Singer, Randall S.
2013-01-01
A prospective cohort study was performed to evaluate the prevalences and loads of Salmonella and Campylobacter spp. in farm and processing plant samples collected from 55 commercial broiler chicken flocks. Environmental samples were collected from broiler houses within 48 h before slaughter, and carcass rinses were performed on birds from the same flocks at 4 different stages of processing. Salmonella was detected in farm samples of 50 (90.9%) flocks and in processing samples of 52 (94.5%) flocks. Campylobacter was detected in farm samples of 35 (63.6%) flocks and in processing samples of 48 (87.3%) flocks. There was a significant positive relationship between environmental farm samples and processing plant carcass rinses with respect to both Salmonella and Campylobacter prevalences and loads. Campylobacter loads were significantly higher than Salmonella loads, and the correlations between samples collected from the same flocks were higher for Campylobacter than they were for Salmonella. Boot socks were the most sensitive sample type for detection of Salmonella on the farm, whereas litter samples had the strongest association with Salmonella loads in pre- and postchill carcass rinses. Boot socks, drag swabs, and fecal samples all had similar sensitivities for detecting Campylobacter on the farm, and all were more strongly associated with Campylobacter loads in carcass rinses than were litter samples. Farm samples explained a greater proportion of the variability in carcass rinse prevalences and loads for Campylobacter than they did for Salmonella. Salmonella and Campylobacter prevalences and loads both decreased significantly as birds progressed through the processing plant. PMID:23624481
Balejo, Rodrigo Dalla Pria; Cortelli, José Roberto; Costa, Fernando Oliveira; Cyrino, Renata Magalhães; Aquino, Davi Romeiro; Cogo-Müller, Karina; Miranda, Taís Browne; Moura, Sara Porto; Cortelli, Sheila Cavalca
2017-01-01
Abstract Objective: Single dose of systemic antibiotics and short-term use of mouthwashes reduce bacteremia. However, the effects of a single dose of preprocedural rinse are still controversial. This study evaluated, in periodontally diseased patients, the effects of a pre-procedural mouth rinse on induced bacteremia. Material and Methods: Systemically healthy individuals with gingivitis (n=27) or periodontitis (n = 27) were randomly allocated through a sealed envelope system to: 0.12% chlorhexidine pre-procedural rinse (13 gingivitis and 13 periodontitis patients) or no rinse before dental scaling (14 gingivitis and 15 periodontitis patients). Periodontal probing depth, clinical attachment level, plaque, and gingival indices were measured and subgingival samples were collected. Blood samples were collected before dental scaling, 2 and 6 minutes after scaling. Total bacterial load and levels of P. gingivalis were determined in oral and blood samples by real-time polymerase chain reaction, while aerobic and anaerobic counts were determined by culture in blood samples. The primary outcome was the antimicrobial effect of the pre-procedural rinse. Data was compared by Mann-Whitney and Signal tests (p<0.05). Results: In all sampling times, polymerase chain reaction revealed higher blood bacterial levels than culture (p<0.0001), while gingivitis patients presented lower bacterial levels in blood than periodontitis patients (p<0.0001). Individuals who experienced bacteremia showed worse mean clinical attachment level (3.4 mm vs. 1.1 mm) and more subgingival bacteria (p<0.005). The pre-procedural rinse did not reduce induced bacteremia. Conclusions: Bacteremia was influenced by periodontal parameters. In periodontally diseased patients, pre-procedural rinsing showed a discrete effect on bacteremia control. PMID:29211279
Sample treatment optimization for fish stool metabolomics.
Hano, Takeshi; Ito, Mana; Ito, Katsutoshi; Uchida, Motoharu
2018-06-07
Gut microbiota play an essential role in an organism's health. The fecal metabolite profiling content reflects these microbiota-mediated physiological changes in various organisms, including fish. Therefore, metabolomics analysis of fish feces should provide insight into the dynamics linking physiology and gut microbiota. However, metabolites are often unstable in aquatic environments, making fecal metabolites difficult to examine in fish. In this study, a novel method using gas chromatography-mass spectrometry (GC-MS) was developed and optimized for the preparation of metabolomics samples from the feces of the marine fish, red sea bream (Pagrus major). The preparation methodology was optimized, focusing on rinsing frequency and rinsing solvent. Feces (collected within 4 h of excretion) were rinsed three times with sterilized 2.5% NaCl solution or 3.0% artificial seawater (ASW). Among the 86 metabolites identified in the NaCl-rinsed samples, 57 showed superior recovery to that in ASW-rinsed samples, indicating that NaCl is a better rinsing solvent, particularly for amino acids, organic acids, and fatty acids. To evaluate rinsing frequency, fecal samples were rinsed with NaCl solution 0, 1, 3, or 5 times. The results indicate that three or more rinses enabled robust and stable detection of metabolites encapsulated within the solid fecal residue. Furthermore, these data suggest that rinsing is unnecessary when studying sugars, amino acids, and sterols, again highlighting the need for appropriate rinsing solvent and frequency. This study provides further insight into the use of fecal samples to evaluate and promote fish health during farming and supports the application of this and similar analyses to study the effects of environmental fluctuations and/or contamination. Copyright © 2018 Elsevier B.V. All rights reserved.
Ceballos, Diana; King, Bradley; Beaucham, Catherine; Brueck, Scott E.
2015-01-01
Closed-face 37-millimeter (mm) polystyrene cassettes are often used for exposure monitoring of metal particulates. Several methods have been proposed to account for the wall loss in air sampling cassettes, including rinsing, wiping, within-cassette dissolution, and an internal capsule fused to the filter that could be digested with the filter. Until internal capsules replace filters, other methods for assessing wall losses may be considered. To determine if rinsing and wiping or wiping alone is adequate to determine wall losses on cassettes, we collected 54 full-shift area air samples at a battery recycling facility. We collected six replicate samples at three locations within the facility for 3 consecutive days. The wall losses of three replicate cassettes from each day-location were analyzed following a rinse and two consecutive wipes. The wall losses of the other three replicates from each day-location were analyzed following two consecutive wipes only. Mixed-cellulose ester membrane filter, rinse, and wipes were analyzed separately following NIOSH Method 7303. We found an average of 29% (range: 8%–54%) recovered lead from the cassette walls for all samples. We also found that rinsing prior to wiping the interior cassette walls did not substantially improve recovery of wall losses compared to wiping alone. A rinse plus one wipe recovered on average 23% (range: 13%–33%) of the lead, while one wipe alone recovered on average 21% (range: 16%–22%). Similarly we determined that a second wipe did not provide substantial additional recovery of lead (average: 4%, range: 0.4%–19%) compared to the first wipe disregarding the rinse (average: 18%, range: 4%–39%). We concluded that when an internal capsule is not used, wall losses of lead dust in air sampling cassettes can be adequately recovered by wiping the internal wall surfaces of the cassette with a single wipe. PMID:26125330
Effect of Green Coffee Bean Extract on Streptococcus mutans Count: A Randomised Control Trial
Kaushik, Mamta; Roshni, Roshni; Reddy, Pallavi; Mehra, Neha; Jain, Vallari; Rana, Ritu
2017-01-01
Introduction Mouth rinses have been popularly used as a supplementary oral hygiene aid. A lot of commercially available mouth rinses possess few adverse effects, which has necessitated the search for alternative and herbal mouth rinses. Aim The aim of the study was to assess the effect of rinsing with green coffee bean extract in comparison with chlorhexidine mouthwash and sterile water on salivary Streptococcus mutans count. Materials and Methods A randomized parallel controlled clinical trial was planned and 45 subjects aged between 18-22 years were selected. The subjects were divided into three groups (n=15 in each group): Group A: Study group: 2% Green coffee bean extract, Group B: Positive control: 0.2% Chlorhexidine (CHX), Group C: Negative control: Sterile water. Group A subjects rinsed mouth with 5 ml of 2% Green coffee bean extract for one minute. Group B subjects rinsed mouth with 5 ml 0.2% CHX mouthwash for one minute. Group C subjects rinsed mouth with 5 ml of Sterile water for one minute twice daily for two weeks. Baseline samples (Pre rinse) were collected on day 1 and post rinsing saliva samples were collected after 14 days. The samples were cultured using Mitis Salivarius Agar enriched with Bacitracin and colonies were counted using a hand held digital colony counter. The statistical analysis was done using paired t-test, One-way variance ANOVA and Post-Hoc tests. Results The Green coffee bean extract group showed a statistical significant reduction in Streptococcus mutans colony count before and after intervention which was comparable with CHX group. Conclusion Green coffee bean extract as a mouthwash can be explored as a safe and effective alternative to CHX mouthwash. PMID:28658911
USDA-ARS?s Scientific Manuscript database
Chemical antimicrobial interventions used as poultry processing aids may have potential for carry-over into whole poultry carcass buffered peptone water (BPW) rinses collected for the recovery of viable Salmonella. Such carry-over may lead to false negative indications due to continuing bactericidal...
Petzel, Emily A; Smart, Alexander J; St-Pierre, Benoit; Selman, Susan L; Bailey, Eric A; Beck, Erin E; Walker, Julie A; Wright, Cody L; Held, Jeffrey E; Brake, Derek W
2018-05-04
Six ruminally cannulated cows (570 ± 73 kg) fed corn residues were placed in a 6 × 6 Latin square to evaluate predictions of diet composition from ruminally collected diet samples. After complete ruminal evacuation, cows were fed 1-kg meals (dry matter [DM]-basis) containing different combinations of cornstalk and leaf and husk (LH) residues in ratios of 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0. Diet samples from each meal were collected by removal of ruminal contents after 1-h and were either unrinsed, hand-rinsed or machine-rinsed to evaluate effects of endogenous compounds on predictions of diet composition. Diet samples were analyzed for neutral (NDF) and acid (ADF) detergent fiber, acid detergent insoluble ash (ADIA), acid detergent lignin (ADL), crude protein (CP), and near infrared reflectance spectroscopy (NIRS) to calculate diet composition. Rinsing type increased NDF and ADF content and decreased ADIA and CP content of diet samples (P < 0.01). Rinsing tended to increase (P < 0.06) ADL content of diet samples. Differences in concentration between cornstalk and LH residues within each chemical component were standardized by calculating a coefficient of variation (CV). Accuracy and precision of estimates of diet composition were analyzed by regressing predicted diet composition and known diet composition. Predictions of diet composition were improved by increasing differences in concentration of chemical components between cornstalk and LH residues up to a CV of 22.6 ± 5.4%. Predictions of diet composition from unrinsed ADIA and machine-rinsed NIRS had the greatest accuracy (slope = 0.98 and 0.95, respectively) and large coefficients of determination (r2 = 0.86 and 0.74, respectively). Subsequently, a field study (Exp. 2) was performed to evaluate predictions of diet composition in cattle (646 ± 89 kg) grazing corn residue. Five cows were placed in 1 of 10 paddocks and allowed to graze continuously or to strip-graze corn residues. Predictions of diet composition from ADIA, ADL, and NIRS did not differ (P = 0.99), and estimates of cornstalk intake tended to be greater (P = 0.09) in strip-grazed compared to continuously grazed cows. These data indicate that diet composition can be predicted by chemical components or NIRS by ruminal collection of diet samples among cattle grazing corn residues.
A "clean-catch" urine sample is performed by collecting the sample of urine in midstream. Men or boys should wipe clean the head ... water and rinse well. A small amount of urine should initially fall into the toilet bowl before ...
Dołęgowska, Sabina; Gałuszka, Agnieszka; Migaszewski, Zdzisław M
2017-12-01
The main source of rare earth elements (REE) in mosses is atmospheric deposition of particles. Sample treatment operations including shaking, rinsing or washing, which are made in a standard way on moss samples prior to chemical analysis, may lead to removing particles adsorbed onto their tissues. This in turn causes differences in REE concentrations in treated and untreated samples. For the present study, 27 combined moss samples were collected within three wooded areas and prepared for REE determinations by ICP-MS using both manual cleaning by shaking and triple rinsing with deionized water. Higher concentrations of REE were found in manually cleaned samples. The comparison of REE signatures and shale-normalized REE concentration patterns showed that the treatment procedure did not lead to fractionation of REE. All the samples were enriched in medium rare earth elements, and the δMREE factor remained practically unchanged after rinsing. Positive anomalies of Nd, Sm, Eu, Gd, Er and Yb were observed in both, manually cleaned and rinsed samples. For all the elements examined, analytical uncertainty was below 3.0% whereas sample preparation uncertainty computed with ANOVA, RANOVA, modified RANOVA and range statistics methods varied from 3.5 to 29.7%. In most cases the lowest s rprep values were obtained with the modified RANOVA method. Copyright © 2017 Elsevier Ltd. All rights reserved.
de Souza, Marjorie M A; Hartel, Gunter; Whiteman, David C; Antonsson, Annika
2018-04-01
Very little is known about the natural history of oral HPV infection. Several different methods exist to collect oral specimens and detect HPV, but their respective performance characteristics are unknown. We compared two different methods for oral specimen collection (oral saline rinse and commercial saliva kit) from 96 individuals and then analyzed the samples for HPV by two different PCR detection methods (single GP5+/6+ PCR and nested MY09/11 and GP5+/6+ PCR). For the oral rinse samples, the oral HPV prevalence was 10.4% (GP+ PCR; 10% repeatability) vs 11.5% (nested PCR method; 100% repeatability). For the commercial saliva kit samples, the prevalences were 3.1% vs 16.7% with the GP+ PCR vs the nested PCR method (repeatability 100% for both detection methods). Overall the agreement was fair or poor between samples and methods (kappa 0.06-0.36). Standardizing methods of oral sample collection and HPV detection would ensure comparability between future oral HPV studies. Copyright © 2017 Elsevier Inc. All rights reserved.
Aprea, Luigi; Cannova, Lucia; Firenze, Alberto; Bivona, Maria S; Amodio, Emanuele; Romano, Nino
2010-12-01
Legionella pneumophila and Pseudomonas aeruginosa are common colonizers of water environments, particularly dental unit waterlines. The aim of this study was to assess whether the technical, functional and structural characteristics of dental units can influence the presence and the levels of opportunistic pathogens. Overall, 42 water samples were collected from dental units in a teaching hospital in Palermo, Italy, including 21 samples from the 21 taps supplied by the municipal water distribution system and 21 samples from oral rinsing cups at 21 dental units. L. pneumophila was present in 16 out of 21 water samples (76.2%) from dental units, and the median concentration was higher in samples from oral rinsing cups than in those from taps (P < 0.001). P. aeruginosa was equally distributed in water samples collected from oral rinsing cups and from taps. Some characteristics of dental units (age, number of chairs per room, number of patients per day and water temperature) were slightly associated with the presence of P. aeruginosa, but not with contamination by L. pneumophila. Our experience suggests that L. pneumophila is frequently detected in dental units, as reported in previous studies, whereas P. aeruginosa is not a frequent contaminant. As a consequence, microbiological control of water quality should be routinely performed, and should include the detection of opportunistic pathogens when bacterial contamination is expected.
Effect of a propolis extract on Streptococcus mutans counts in vivo.
Duailibe, Silvana Alves de Carvalho; Gonçalves, Azizedite Guedes; Ahid, Fernando Jorge Mendes
2007-10-01
To evaluate the antibacterial action of an extract of geopropolis produced by the bee Melipona compressipes fasciculata on the concentration of Streptococcus mutans colonizing the oral cavity of young patients. Forty-one young volunteers performed 21 mouth rinses divided into three rinses per day for 7 days, with no other changes in their oral hygiene and dietary habits. Saliva was collected at three time points: before the first rinse, and one hour and 7 days after the first rinse. A reduction in the concentration of S. mutans was observed in 49% of all samples collected after use of the extract, 26% showed no alterations, and an increasing in S. mutans was observed in 25%. Was performed with the Statistica for Windows 5.9 program using the Kruskal-Wallis test for analysis of variance and the Mann-Whitney U test, with the level of significance set at 5%. The propolis extract possesses in vivo antimicrobial activity against S. mutans present in the oral cavity and might be used as an alternative measure to prevent dental caries.
40 CFR 761.243 - Standard wipe sample method and size.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., AND USE PROHIBITIONS Determining a PCB Concentration for Purposes of Abandonment or Disposal of Natural Gas Pipeline: Selecting Sample Sites, Collecting Surface Samples, and Analyzing Standard PCB Wipe.../Rinse Cleanup as Recommended by the Environmental Protection Agency PCB Spill Cleanup Policy,” dated...
Retention of antimicrobial activity in plaque and saliva following mouthrinse use in vivo.
Otten, M P T; Busscher, H J; van der Mei, H C; Abbas, F; van Hoogmoed, C G
2010-01-01
The aim of this study was to determine the contribution of plaque and saliva towards the prolonged activity, also called substantivity, of three antimicrobial mouthrinses (Listerine®, Meridol®, Crest Pro Health®), used in combination with a toothpaste (Prodent Coolmint®). Volunteers brushed for 4 weeks with a toothpaste without antimicrobial claims, while during the last 2 weeks half of the volunteers used an antimicrobial mouthrinse in addition to brushing. At the end of the experimental period, plaque and saliva samples were collected 6 h after oral hygiene, and bacterial concentrations and viabilities were determined. The contribution of plaque and saliva towards substantivity was assessed by combining plaque obtained after mechanical cleaning only with plaque and saliva obtained after additional use of an antimicrobial rinse. Subsequently, resulting viabilities of the combined plaques were determined. The viabilities of plaque samples after additional rinsing with mouthrinses were lower than of plaque obtained after mechanical cleaning only, regardless of the rinse involved. Moreover, plaque collected 6 h after rinsing with antimicrobial mouthrinses contained a surplus of antimicrobial activity. Only Listerine showed decreased viability in saliva, but none of the mouthrinses showed any residual antimicrobial activity in saliva. The findings indicate that plaque left behind after mechanical cleaning contributes to the prolonged substantivity of antimicrobial mouthrinses. Copyright © 2010 S. Karger AG, Basel.
2012-01-01
Background The instrument channels of gastrointestinal (GI) endoscopes may be heavily contaminated with bacteria even after high-level disinfection (HLD). The British Society of Gastroenterology guidelines emphasize the benefits of manually brushing endoscope channels and using automated endoscope reprocessors (AERs) for disinfecting endoscopes. In this study, we aimed to assess the effectiveness of decontamination using reprocessors after HLD by comparing the cultured samples obtained from biopsy channels (BCs) of GI endoscopes and the internal surfaces of AERs. Methods We conducted a 5-year prospective study. Every month random consecutive sampling was carried out after a complete reprocessing cycle; 420 rinse and swabs samples were collected from BCs and internal surface of AERs, respectively. Of the 420 rinse samples collected from the BC of the GI endoscopes, 300 were obtained from the BCs of gastroscopes and 120 from BCs of colonoscopes. Samples were collected by flushing the BCs with sterile distilled water, and swabbing the residual water from the AERs after reprocessing. These samples were cultured to detect the presence of aerobic and anaerobic bacteria and mycobacteria. Results The number of culture-positive samples obtained from BCs (13.6%, 57/420) was significantly higher than that obtained from AERs (1.7%, 7/420). In addition, the number of culture-positive samples obtained from the BCs of gastroscopes (10.7%, 32/300) and colonoscopes (20.8%, 25/120) were significantly higher than that obtained from AER reprocess to gastroscopes (2.0%, 6/300) and AER reprocess to colonoscopes (0.8%, 1/120). Conclusions Culturing rinse samples obtained from BCs provides a better indication of the effectiveness of the decontamination of GI endoscopes after HLD than culturing the swab samples obtained from the inner surfaces of AERs as the swab samples only indicate whether the AERs are free from microbial contamination or not. PMID:22943739
Chiu, King-Wah; Tsai, Ming-Chao; Wu, Keng-Liang; Chiu, Yi-Chun; Lin, Ming-Tzung; Hu, Tsung-Hui
2012-09-03
The instrument channels of gastrointestinal (GI) endoscopes may be heavily contaminated with bacteria even after high-level disinfection (HLD). The British Society of Gastroenterology guidelines emphasize the benefits of manually brushing endoscope channels and using automated endoscope reprocessors (AERs) for disinfecting endoscopes. In this study, we aimed to assess the effectiveness of decontamination using reprocessors after HLD by comparing the cultured samples obtained from biopsy channels (BCs) of GI endoscopes and the internal surfaces of AERs. We conducted a 5-year prospective study. Every month random consecutive sampling was carried out after a complete reprocessing cycle; 420 rinse and swabs samples were collected from BCs and internal surface of AERs, respectively. Of the 420 rinse samples collected from the BC of the GI endoscopes, 300 were obtained from the BCs of gastroscopes and 120 from BCs of colonoscopes. Samples were collected by flushing the BCs with sterile distilled water, and swabbing the residual water from the AERs after reprocessing. These samples were cultured to detect the presence of aerobic and anaerobic bacteria and mycobacteria. The number of culture-positive samples obtained from BCs (13.6%, 57/420) was significantly higher than that obtained from AERs (1.7%, 7/420). In addition, the number of culture-positive samples obtained from the BCs of gastroscopes (10.7%, 32/300) and colonoscopes (20.8%, 25/120) were significantly higher than that obtained from AER reprocess to gastroscopes (2.0%, 6/300) and AER reprocess to colonoscopes (0.8%, 1/120). Culturing rinse samples obtained from BCs provides a better indication of the effectiveness of the decontamination of GI endoscopes after HLD than culturing the swab samples obtained from the inner surfaces of AERs as the swab samples only indicate whether the AERs are free from microbial contamination or not.
Recovery of Enterococcus faecalis from cheese in the oral cavity of healthy subjects.
Razavi, A; Gmür, R; Imfeld, T; Zehnder, M
2007-08-01
Enterococci are rarely found in the healthy human oral cavity, yet they are strongly associated with filled root canals. The origin of these enterococci remains unknown. Our hypothesis is that they are transient food-born colonizers under healthy conditions. This pilot study reinvestigated the prevalence of enterococci in the oral cavity of healthy volunteers, screened cheese samples for enterococci and investigated colonization of the oral cavity after ingestion of an enterocci-positive cheese. Concentrated oral rinse samples were collected from a cohort of 50 dental students and proved negative for viable enterococci. Twenty cheese samples were obtained from local supermarkets. Enterococci were cultured and identified using standard methods. Viable enterococci were detected in one of five specimens of Swiss Tilsiter, three of five samples of French soft cheese, one of five Mozzarella samples and one of five Feta samples. Eight volunteers from the cohort consumed 10 g of a cheese with high Enterococcus faecalis load. Oral rinse samples were collected before and 1, 10 and 100 min after cheese ingestion. One minute after ingestion, a median of 5,480 E. faecalis colony-forming units was recovered from the oral rinse samples. Bacterial counts were reduced after 10 min, had dropped after 100 min to levels that were significantly (P < 0.005) different from the 1-min and 10-min scores and were below the detection limit after 1 week. These findings suggest that colonization of the healthy oral cavity by enterococci is transitional, but at the same time add weight to our hypothesis that enterococcal root canal infections could be food-borne.
Sun, Wenyue; Zaboli, David; Liu, Yan; Arnaoutakis, Demetri; Khan, Tanbir; Wang, Hao; Koch, Wayne; Khan, Zubair; Califano, Joseph A.
2012-01-01
Background Salivary rinses have been recently proposed as a valuable resource for the development of epigenetic biomarkers for detection and monitoring of head and neck squamous cell carcinoma (HNSCC). Both salivary rinses collected with and without an exfoliating brush from patients with HNSCC are used in detection of promoter hypermethylation, yet their correlation of promoter hypermethylation has not been evaluated. This study was to evaluate the concordance of promoter hypermethylation between salivary rinses collected with and without an exfoliating brush from patients with HNSCC. Methodolgy 57 paired salivary rinses collected with or without an exfoliating brush from identical HNSCC patients were evaluated for promoter hypermethylation status using Quantitative Methylation-Specific PCR. Target tumor suppressor gene promoter regions were selected based on our previous studies describing a panel for HNSCC screening and surveillance, including P16, CCNA1, DCC, TIMP3, MGMT, DAPK and MINT31. Principal Findings In salivary rinses collected with and without brush, frequent methylation was detected in P16 (8.8% vs. 5.2%), CCNA1 (26.3% vs. 22.8%), DCC (33.3% vs. 29.8%), TIMP3 (31.6% vs. 36.8%), MGMT (29.8% vs. 38.6%), DAPK (14.0% vs. 19.2%), and MINT31 (10.5% vs. 8.8%). Spearman's rank correlation coefficient showed a positive correlation between salivary rinses collected with and without brush for P16 (ρ = 0.79), CCNA1 (ρ = 0.61), DCC (ρ = 0.58), TIMP3 (ρ = 0.10), MGMT (ρ = 0.70), DAPK (ρ = 0.51) and MINT31 (ρ = 0.72) (P<0.01). The percent agreement of promoter methylation between salivary rinses with brush and without brush were 96.5% for P16, 82.5% for CCNA1, 78.9% for DCC, 59.7% for TIMP3, 84.2% for MGMT, 84.2% for DAPK, and 94.7% for MINT31. Conclusions Our study demonstrated strong correlations of gene promoter hypermethylation between salivary rinses collected with and without an exfoliating brush. Salivary rinse collection without using an exfoliating brush may offer a cost effective, rapid, non-invasive, and reliable means for development of epigenetic salivary rinse biomarkers. PMID:22438973
Thomas, Ann; Thakur, Sneha; Mhambrey, Sanjana
2015-01-01
A number of natural mouth rinse formulations are being proposed as an alternative to the widely used chemical mouth rinses. To evaluate and compare the antimicrobial efficacy of chlorhexidine (0.2%), sodium fluoride (0.05%), fluoride with essential oils (0.05%), alum (0.02 M), green tea, and garlic with lime mouth rinses against Streptococcus mutans, lactobacilli, and Candida albicans. The three microbes were isolated from the saliva samples collected from children with severe early childhood caries. The zone of minimum inhibition was assessed using agar diffusion method. The data were statistically analyzed using SPSS software. Against S. mutans and lactobacilli, chlorhexidine mouth rinse was found to be the most effective as compared to sodium fluoride (P < 0.001, P < 0.001), fluoride with essential oils (P < 0.001, P < 0.001), alum (P < 0.001, P < 0.001), green tea (P < 0.001, P < 0.001), and garlic with lime (P < 0.001, P < 0.001) mouth rinses, respectively. But against C. albicans, garlic with lime mouth rinse was found to be the most effective as compared to chlorhexidine (P < 0.001), sodium fluoride (P < 0.001), fluoride with essential oils (P < 0.001), alum (P < 0.001), and green tea (P < 0.001) mouth rinses. Against S. mutans and lactobacilli, after chlorhexidine mouth rinse, garlic with lime mouth rinse was found to be significantly more effective than sodium fluoride (P = 0.053, P = 0.001), fluoride with essential oils (P < 0.001, P < 0.001), alum (P < 0.001, P < 0.001), and green tea (P < 0.001, P < 0.001) mouth rinses. As a natural mouth rinse, garlic with lime mouth rinse was found to be the most promising. However, further studies are needed in this field.
Cheng, Shih-Jung; Chang, Chi-Feng; Ko, Hui-Hsin; Lee, Jang-Jaer; Chen, Hsin-Ming; Wang, Huei-Jen; Lin, Hsiao-Shan; Chiang, Chun-Pin
2018-02-01
Effective biomarkers for oral cancer screening are important for early diagnosis and treatment of oral cancer. Oral epithelial cell samples collected by mouth rinse were obtained from 65 normal control subjects, 108 patients with oral potentially malignant disorders, and 94 patients with oral squamous cell carcinoma (OSCC). Methylation levels of zinc-finger protein 582 (ZNF582) and paired-box 1 (PAX1) genes were quantified by real-time methylation-specific polymerase chain reaction after bisulfite conversion. An abrupt increase in methylated ZNF582 (ZNF582 m ) and PAX1 (PAX1 m ) levels and positive rates from mild dysplasia to moderate/severe dysplasia, indicating that both ZNF582 m and PAX1 m are effective biomarkers for differentiating moderate dysplasia or worse (MODY+) oral lesions. When ZNF582 m /PAX1 m tests were used for identifying MODY+ oral lesions, the sensitivity, specificity, and odds ratio (OR) were 0.65/0.64, 0.75/0.82, and 5.6/8.0, respectively. Hypermethylated ZNF582 and PAX1 genes in oral epithelial cells collected by mouth rinse are effective biomarkers for the detection of oral dysplasia and oral cancer. © 2017 Wiley Periodicals, Inc.
USDA-ARS?s Scientific Manuscript database
This study compared the recovery of Salmonella from hatching eggs using three sampling methods (eggshell rinsing, eggshell crush following a previous rinse, and eggshell crush without previous rinse). Eggshells were drop-inoculated with approximately 10, 100, or 1,000 cfu/eggshell of S. Enteritidis...
Langevin, Scott M; Eliot, Melissa; Butler, Rondi A; Cheong, Agnes; Zhang, Xiang; McClean, Michael D; Koestler, Devin C; Kelsey, Karl T
2015-01-01
There are currently no screening tests in routine use for oral and pharyngeal cancer beyond visual inspection and palpation, which are provided on an opportunistic basis, indicating a need for development of novel methods for early detection, particularly in high-risk populations. We sought to address this need through comprehensive interrogation of CpG island methylation in oral rinse samples. We used the Infinium HumanMethylation450 BeadArray to interrogate DNA methylation in oral rinse samples collected from 154 patients with incident oral or pharyngeal carcinoma prior to treatment and 72 cancer-free control subjects. Subjects were randomly allocated to either a training or a testing set. For each subject, average methylation was calculated for each CpG island represented on the array. We applied a semi-supervised recursively partitioned mixture model to the CpG island methylation data to identify a classifier for prediction of case status in the training set. We then applied the resultant classifier to the testing set for validation and to assess the predictive accuracy. We identified a methylation classifier comprised of 22 CpG islands, which predicted oral and pharyngeal carcinoma with a high degree of accuracy (AUC = 0.92, 95 % CI 0.86, 0.98). This novel methylation panel is a strong predictor of oral and pharyngeal carcinoma case status in oral rinse samples and may have utility in early detection and post-treatment follow-up.
Release of mineral ions in dental plaque following acid production.
Tanaka, M; Margolis, H C
1999-03-01
The release of appreciable amounts of calcium, phosphate and fluoride found in whole plaque into the plaque-fluid phase, following bacterial acid production, can potentially reduce the driving force for tooth demineralization. However, limited information is available on this topic, particularly on the release of fluoride. This study sought to determine the change in calcium, phosphate and fluoride concentrations in plaque fluid after sucrose exposure. 48 h overnight-fasted supragingival plaque samples were collected from all tooth surfaces (with the exception of the lower lingual anterior teeth) of one half of an individual mouth, following a 1 min water rinse. Plaque samples were then collected from the other half of the same mouth, following a 292 mM sucrose rinse. Plaque fluid was isolated by centrifugation and analysed for total calcium and phosphate (ion chromatography) and for free fluoride (ion-specific electrode). Samples were collected from seven individuals. Following sucrose exposure, plaque-fluid pH decreased significantly from 6.5+/- 0.3 to 5.4+/-0.2; calcium concentrations (mmol/l) also increased significantly (p < 0.01) from 1.9+/-0.5 to 5.0+/-2.1. Fluoride and phosphate concentrations in plaque fluid, however, did not increase significantly after sucrose exposure: mean concentrations (mmol/l) of fluoride after the water and sucrose rinses were 0.006+/-0.003 and 0.005+/-0.002, respectively, and mean phosphate concentrations (mmol/l) were 11.0+/-2.0 and 12.0+/-3.0, respectively. When results were expressed per wet plaque weight, phosphate concentrations were also found to increase significantly. The same trends were observed when additional plaque samples were treated in vitro with sucrose: fluoride-ion activity did not increase in plaque under in vivo-like conditions.
Estimating removal rates of bacteria from poultry carcasses using two whole-carcass rinse volumes
USDA-ARS?s Scientific Manuscript database
Rinse sampling is a common method for determining the level of microbial contamination on poultry carcasses. One of the advantages of rinse sampling, over other carcass sampling methods, is that the results can be used for both process control applications and to estimate the total microbial level o...
Effect of an essential oil-containing mouth rinse on VSC-producing bacteria on the tongue.
Thaweboon, Sroisiri; Thaweboon, Boonyanit
2011-03-01
The objective of the present study was to investigate the inhibitory effect of a commercially available essential oil-containing mouth rinse 12 hours after a single rinse and two weeks of twice daily rinsing, on volatile sulphur compounds (VSC) producing bacteria on the tongue. The study was a randomized, double-blind, controlled crossover design. Thirty-six healthy subjects, aged 20-48 years, volunteered to participate in the study. Subjects were randomly assigned to rinse twice daily with either an essential oil-containing mouth rinse (Cool Mint Listerine Antiseptic) or a negative control rinse. Bacteria samples were taken from the dorsum of the tongue at baseline, after the first rinse and two weeks later. They were plated on OOPS medium to enumerate the VSC-producing bacteria. Intergroup comparisons of log10 transformed colony-forming units of the samples were made using analysis of covariance. Each comparison was performed at a 5% significance level. The mean VSC-producing bacteria in subjects using the essential oil mouth rinse were significantly lower than those using the control rinse twice daily. In healthy subjects, rinsing with an essential oil-containing mouth rinse can have a significant effect on VSC-producing bacteria on the tongue and may be useful for controlling intrinsic oral malodor over prolonged periods.
Fuller, Maren Y; Mody, Dina; Hull, April; Pepper, Kristi; Hendrickson, Heather; Olsen, Randall
2018-02-01
- Thyroid nodules have a prevalence of approximately 70% in adults. Fine-needle aspiration (FNA) is a minimally invasive, cost-effective, standard method to collect tissue from thyroid nodules for cytologic examination. However, approximately 15% of thyroid FNA specimens cannot be unambiguously diagnosed as benign or malignant. - To investigate whether clinically actionable data can be obtained using next-generation sequencing of residual needle rinse material. - A total of 24 residual needle rinse specimens with malignant (n = 6), indeterminate (n = 9), or benign (n = 9) thyroid FNA diagnoses were analyzed in our clinical molecular diagnostics laboratory using next-generation sequencing assays designed to detect gene mutations and translocations that commonly occur in thyroid cancer. Results were correlated with surgical diagnoses and clinical outcomes. - Interpretable data were generated from 23 of 24 residual needle rinse specimens. Consistent with its well-known role in thyroid malignancy, BRAF V600E mutations were detected in 4 malignant cases. An NRAS mutation was detected in 1 benign case. No mutations were detected from specimens with indeterminate diagnoses. - Our data demonstrate that residual thyroid FNA needle rinses are an adequate source of material for molecular diagnostic testing. Importantly, detection of a mutation implicated in thyroid malignancy was predictive of the final surgical diagnosis and clinical outcome. Our strategy to triage thyroid nodules with indeterminate cytology with molecular testing eliminates the need to perform additional FNA passes into dedicated media or to schedule additional invasive procedures. Further investigation with a larger sample size to confirm the clinical utility of our proposed strategy is underway.
Kizilbash, Quratulain; Jost, Kenneth; Armitige, Lisa; Griffith, David E; Dunbar, Denise; Seaworth, Barbara
2017-01-01
Abstract Background Non tuberculous mycobacteria (NTM) are widely distributed in soil and water. NTM/Mycobacterium tuberculosis complex (MTBC) mixes may yield positive AFB smears falsely attributed to tuberculosis (TB) and false-resistance profiles for TB due to contaminated diagnostic samples. This as well as isolation of NTM may pose diagnostic and management problems. Texas Center for Infectious Disease (TCID) is a hospital for patients with confirmed TB. After a cluster of isolates of Mycobacterium gordonae was identified, a quality assurance review found inadequate protocols which included eating and drinking prior to collection. Changes made to the sputum collection protocol included reeducation of respiratory therapists and a sterile saline rinse intervention prior to sputum collection. Methods All sputa collected for AFB culture from diagnosed TB patients at TCID from January 1st, 2014 to December 31st, 2014 prior to the intervention and from August 1st, 2016 to January 31st, 2017, the 6 months following the quality assurance intervention were included. Sputum samples were processed at the Texas Department of State and Health Services (DSHS) Laboratory. Results A total of 1,853 sputum samples were processed; 1,288 from 2014 and 565 following the intervention. NTM decreased from 56 (4.3%) to 7 (1.2%) after the quality assurance intervention was instituted for a NTM decrease of 75.0%. M. gordonae decreased by 78.6%. No patients had evidence of NTM disease. Conclusion A breach in sputum collection protocols at TCID accounted for the increase in NTM isolation in 2014, half of which were M. gordonae. The reeducation of respiratory therapy staff and initiation of sterile saline rinse prior to sputum collection resulted in a significant reduction in the overall NTM rate. M. gordonae was isolated only three times following the intervention. At TCID, a location where tap water and bottled water contains NTM, drinking these prior to sputum collection possibly contributed to the cluster for NTM, especially M. gordonae. We recommend rinsing the mouth with sterile saline or water prior to sputum collection to decrease isolation of rarely pathogenic NTM. Disclosures All authors: No reported disclosures.
Dogan, Alev Aksoy; Cetin, Emel Sesli; Hüssein, Emad; Adiloglu, Ali Kudret
2009-07-01
To determine the absolute and relative antibacterial activity of octenidine dihydrochloride (OCT) against total and cariogenic bacteria in saliva samples of patients with fixed orthodontic appliances during 5 days of usage. The study group consisted of 5 male and 13 female subjects who were selected from patients in the Clinic of Orthodontics. Each patient was given physiologic saline (PS), chlorhexidine gluconate (CHX), polyvinylpyrrolidone-iodine complex (PVP-I), and OCT every morning for 5 days, each separated by a 2-week interval. Total and cariogenic bacteria in saliva samples of orthodontically treated patients with fixed appliances were collected during 5 days of usage. Unstimulated saliva was collected as a baseline sample. Saliva samples were collected at 15 minutes, and on the second, third, and fifth day after rinsing the mouth with any of the solutions for 30 seconds, and bacterial counts were detected. OCT showed an ultimate reduction of total viable oral bacteria, Lactobacillus species, and Streptococcus mutans in vivo. OCT also had a significantly greater inhibitory effect than 0.2% CHX and 7.5% PVP-I, from the beginning of the study until the fifth day after the orthodontic appliances were bonded (P < .1). OCT compared favorably with respect to CHX and PVP-I complex in orthodontically treated patients with fixed appliances (P = .1).
Nazzal, H; Duggal, M S; Kowash, M B; Kang, J; Toumba, K J
2016-06-01
This was to compare the salivary fluoride levels following tooth brushing with amine fluoride toothpastes containing three different concentrations of F (250 ppm F, 500 ppm F and 1250 ppm F) and to evaluate the effect of rinsing with water on the oral fluoride levels up to 90 min. A double blind randomised six-arm crossover study was conducted with 32 child participants. Patients were divided into two groups depending on their caries experience with caries-free group (n = 17, mean age = 72.9 months) and caries-prone group (n = 15, mean age = 69.6 months, mean dmfs = 12.3). Each participant brushed their teeth with a smear of dentifrice containing (250 ppm, 500 ppm and 1250 ppm F toothpastes) for 60 s. After spitting out the dentifrice/saliva slurry, participants either rinsed with water or did not rinse at all. Samples of whole mixed unstimulated saliva were collected at 0 (baseline), 1, 15, 30, 45, 60 and 90 mins post-brushing/rinsing. After completing the study on residual fluoride concentration it was found that caries was not a significant variable (p = 0.567) while every other variable was (all p values <0.001). Time, toothpaste F concentration and rinse had significant effects (p < 0.001). In general, higher residual salivary F concentrations were found with increased F concentration in toothpastes and when no rinsing was performed after brushing. The results of this study support the current recommendation of using toothpastes with >1000 ppm F concentration in children with an increased caries risk in addition to spitting excess toothpaste with no rinsing following brushing.
LuIs, Henrique Soares; Luis, Luis Soares; Bernardo, Mário
2016-01-01
Mouthrinses are used, by many of our patients, as a complement to daily dental hygiene routine. The use of a toothbrush and an interproximal cleaning method may not be enough to control dental plaque. Essential oils and delmopinol mouth rinses are effective for the prevention of dental caries and gingivitis. To study the effect of an essential oil and a delmopinol mouth rinse on dental plaque bacteria, an in vitro study was developed. The objective of this study was to determine the antibacterial activity of an essential oil and a delmopinol mouth rinse on Streptococcus mutans, Lactobacilli, and aerobic and anaerobic dental plaque nonspecific bacteria. Samples of human dental plaque were collected from consenting participants and bacteria isolated. Disk-diffusion tests were performed to obtain the minimum concentration of the mouth rinses necessary to inhibit bacterial growth. The ability of the commercial mouth rinses to inhibit bacterial growth was studied in comparison to a positive control (0.2% chlorhexidine) and a negative laboratorial control (sterilized water). The minimum inhibitory concentration was found to be inferior to the commercial essential oils and delmopinol mouth rinses concentrations. Delmopinol and essential oils have significant antibacterial properties shown in vitro only for aerobic bacteria, and for S. mutans, Lactobacillus, and anaerobic bacteria, the results were not statistically significant. Essential oils and chlorhexidine are statistically similar and better than delmopinol for aerobic bacteria growth inhibition. For the other bacteria, essential oils and delmopinol are not statistically promising. Results show that essential oils only may help patients to maintain good oral health as a complement to daily brushing and interproximal cleaning.
USDA-ARS?s Scientific Manuscript database
Traditional plating methods are reliable means for Campylobacter identification from poultry samples but automated gene-based detection systems now available can reduce assay time, data collection and analysis. Bio-Rad and DuPont Qualicon recently introduced Campylobacter assays for their real-time ...
Anumula, Lavanya; Kumar, Kv Suneel; Krishna, Chnv Murali; Lakshmi, K Sree
2017-07-01
Dental caries is one of the most common causes of morbidity of the tooth. Attempts have been made to reduce the pathogen population size i.e., Mutans Streptococci (MS) to demote the incidence of caries and increase the resistance of the tooth to cariogenic attack. To evaluate the antibacterial efficacy of freshly prepared ozonated water, in proposing it as an alternative mouth rinse on MS in comparison to Chlorhexidine (CHX). Subjects with high caries incidence and MS counts more than 105 Colony Forming Unit (CFU) were selected and divided by block randomization into two groups of 23 subjects each. The subjects were advised to use the respective mouth rinses under the operator surveillance, consecutively for 14 days. Stimulated salivary samples were collected from the subjects on the first day, 7 th and 14 th day to analyse the changes in MS counts during the course of use of oral rinses. The obtained data was tabulated and statistically analysed. Freshly prepared ozonated water showed a statistically significant reduction in MS counts after an interval of 7 days and 14 days when compared to CHX. Ozonated water when consecutively used as a mouth rinse resulted in a significant reduction of MS counts. Hence, it can be used as an alternative to chlorhexidine.
Microbiology of broiler carcasses and chemistry of chiller water as affected by water reuse.
Northcutt, J K; Smith, D; Huezo, R I; Ingram, K D
2008-07-01
A study was conducted to determine the effects of treating and reusing poultry chiller water in a commercial poultry processing facility. Broiler carcasses and chiller water were obtained from a commercial processing facility which had recently installed a TOMCO Pathogen Management System to recycle water in sections 2 and 3 of two 3-compartment chillers. In this system, reused water is blended with fresh water to maintain the chiller volume. Carcasses were sampled prechill and postchill (final exit), and chiller water was sampled from the beginning and end of each of the 3 sections. Carcasses were subjected to a whole carcass rinse (WCR) in 0.1% peptone. Numbers of Escherichia coli (EC), coliforms (CF), and Campylobacter (CPY) were determined from the WCR and chiller water samples. Prevalence of Salmonella (SAL) was also determined on the WCR and chiller water samples. On average, prechill levels of bacteria recovered from rinses were 2.6, 2.9, and 2.6 log10 cfu/mL for EC, CF, and CPY, respectively. Ten out of 40 (25%) prechill carcasses were positive for SAL. After chilling, numbers of EC, CF, and CPY recovered from carcass rinses decreased by 1.5, 1.5, and 2.0 log10 cfu/mL, respectively. However, 9 out of 40 (22%) postchill carcasses were positive for SAL. When the chiller water samples were tested, counts of EC, CF, and CPY were found only in water collected from the first section of the chiller (inlet and outlet). Two of 4 water samples collected from the inlet of the first section tested positive for SAL. This study shows that fresh and reused water can be used to cool poultry in chiller systems to achieve a reduction in numbers of bacteria (EC, CF, and CPY) or equivalent prevalence (SAL) of bacteria recovered from broiler carcasses.
Rapid Assessment of Salivary MMP-8 and Periodontal Disease Using Lateral Flow Immunoassay
Johnson, N.; Ebersole, J.L.; Kryscio, R.J.; Danaher, R. J.; Dawson, D.; Al-Sabbagh, M.; Miller, C.S.
2016-01-01
Objective This study determined the efficacy of a novel point-of-care immunoflow device (POCID) for detecting matrix metalloproteinase (MMP)-8 concentrations in oral fluids in comparison with a gold-standard laboratory-based immunoassay. Methods Oral rinse fluid and whole expectorated saliva samples were collected from 41 participants clinically classified as periodontally healthy or diseased. Samples were analyzed for MMP-8 by Luminex immunoassay and POCID. Photographed POCID results were assessed by optical scan and visually by two examiners. Data were analyzed by Pearson correlation and receiver operator characteristics. Results MMP-8 was readily detected by the POCID, and concentrations correlated well with Luminex for both saliva and rinse fluids (r=0.57–0.93). Thresholds that distinguished periodontitis from health were delineated from both the optical scans and visual reads of the POCID (sensitivity 0.7–0.9, specificity 0.5–0.7; p < 0.05). Conclusions Performance of this POCID for detecting MMP-8 in oral rinse fluid or saliva was excellent. These findings help demonstrate the utility of salivary biomarkers for distinguishing periodontal disease from health using a rapid point-of-care approach. PMID:27273425
Detection of HPV related oropharyngeal cancer in oral rinse specimens
Rosenthal, Matthew; Huang, Bin; Katabi, Nora; Migliacci, Jocelyn; Bryant, Robert; Kaplan, Samuel; Blackwell, Timothy; Patel, Snehal; Yang, Liying; Pei, Zhiheng; Tang, Yi-Wei; Ganly, Ian
2017-01-01
Background The majority of patients diagnosed with oropharyngeal squamous cell cancer (OPSCC) are due to HPV infection. At present, there are no reliable tests for screening HPV in patients with OPSCC. The objective of this study was to assess the Cobas® HPV Test on oral rinse specimens as an early, non-invasive tool for HPV-related OPSCC. Methods Oral rinse specimens were collected from 187 patients (45 with OPSCC, 61 with oral cavity SCC (OCSCC) and 81 control patients who had benign or malignant thyroid nodules) treated at MSKCC. The Cobas® HPV Test was used to detect 14 high-risk HPV types in these samples. Performance of the HPV Test was correlated with p16 tumor immunohistochemistry as gold standard. Results 91.1% of the oropharynx cancer patients had p16 positive tumors compared to 3.3% of oral cavity cancer. Of the 81 control patients, 79 (97.5%) had no HPV in their oral rinse giving a specificity of the HPV test of 98%. For the combined oral cavity oropharynx cancer cohort, the sensitivity, specificity, positive predictive value and negative predictive value of the HPV Test were 79.1%, 90.5%, 85.0% and 86.4% respectively when p16 immunohistochemistry was used as the reference. Conclusion The Cobas® HPV Test on oral rinse is a highly specific and potentially sensitive test for oropharyngeal cancer and may be a potentially useful screening test for early oropharyngeal cancer. Impact We describe an oral rinse test for the detection of HPV related oropharyngeal cancer. PMID:29312616
Parker, Katherine H; Kemp, Troy J; Pan, Yuanji; Yang, Zhen; Giuliano, Anna R; Pinto, Ligia A
2018-05-03
Current Human papillomavirus (HPV) L1 VLP vaccines protect against HPV-16 and HPV-18-associated cancers, in females and males. Although correlates of protection have not been identified, HPV-specific antibodies at sites of infection are thought to be the main mechanism of protection afforded by vaccination. Oral sampling has gained increased attention as a potential alternative to serum in monitoring immunity to vaccination and understanding local immunity in oral cancers. Serum was collected via venipuncture, and saliva was collected via oral rinses and Merocel® sponges from healthy volunteers: 16 unvaccinated females, 6 females (ages 24-41) and 6 mid-adult aged males (ages 27-45) recipients of three doses of the HPV-16/18/6/11 vaccine (Gardasil®). Mid-adult male vaccine trial participants were compared to female participants. Samples were tested for anti-HPV-16 and anti-HPV-18 immunoglobulin G levels by an L1 virus-like particle-based enzyme-linked immunosorbent assay (ELISA). All vaccinated participants had detectable serum anti-HPV-16 and anti-HPV-18 antibodies. Optimal standard concentration range and sample serial dilutions for oral rinses were determined. The standard curve was not affected by the type of solution examined. Reproducibility of HPV-16 and HPV-18 antibody titers in mouthwash (overall CV < 10%) or in Merocel® extraction buffer was robust (CV < 13%). Excellent assay linearity (R 2 > 0.9) was observed for sera spiked controls in both solutions. HPV-16 and HPV-18 specific antibodies were detectable in saliva from vaccine recipients, both in mouthwash and in Merocel® sponges but levels were several logs lower than those in serum. This study confirms the application of HPV-16 and HPV-18 ELISAs currently used in sero-epidemiological studies of immunogenicity of HPV vaccines for use with oral samples. Oral samples may be a useful resource for the detection of HPV-16 and HPV-18-specific antibodies in saliva following vaccination. Copyright © 2018 Elsevier Ltd. All rights reserved.
Effects of a Novel Whitening Formulation on Dental Enamel.
Takesh, Thair; Sargsyan, Anik; Anbarani, Afarin; Ho, Jessica; Wilder-Smith, Petra
2017-04-01
The goal of this study was to evaluate the enamel whitening effects of 2 new test formulations, one of which was a rinse, and the other a whitening strip. Forty enamel chips were prepared from 20 healthy extracted teeth (2 from each tooth). After pre-staining and colorimetry to measure L* and b* values, 20 matched samples were immersed in either test or control rinses, and then colorimetry was performed again after 1 hr, 2 hr, 3 hr, 6 hr, 12 hr, 24 hr and 48 hrs (Each hour equates to one month of clinical use at the recommended dosage of 1 minute exposure 2 times a day). The remaining 20 matched samples were exposed to the test or control whitening strips and colorimetry was performed every 30 minutes for a total of 10 treatments. Overall, the whitening performance of test and control strips was similar. The test and control rinses had a similar lightening effect over the first 3 hours (equivalent to 3 months of clinical use). Subsequently, the control rinse continued to lighten samples, whereas the test rinse had little further effect. Test and control-whitening strips showed similar effects; over time whitening strips showed a greater lightening effect than whitening rinses.
Sensitivity and specificity of oral HPV detection for HPV-positive head and neck cancer.
Gipson, Brooke J; Robbins, Hilary A; Fakhry, Carole; D'Souza, Gypsyamber
2018-02-01
The incidence of HPV-related head and neck squamous cell carcinoma (HPV-HNSCC) is increasing. Oral samples are easy and non-invasive to collect, but the diagnostic accuracy of oral HPV detection methods for classifying HPV-positive HNSCC tumors has not been well explored. In a systematic review, we identified eight studies of HNSCC patients meeting our eligibility criteria of having: (1) HPV detection in oral rinse or oral swab samples, (2) tumor HPV or p16 testing, (3) a publication date within the last 10 years (January 2007-May 2017, as laboratory methods change), and (4) at least 15 HNSCC cases. Data were abstracted from each study and a meta-analysis performed to calculate sensitivity and specificity. Eight articles meeting inclusion criteria were identified. Among people diagnosed with HNSCC, oral HPV detection has good specificity (92%, 95% CI = 82-97%) and moderate sensitivity (72%, 95% CI = 45-89%) for HPV-positive HNSCC tumor. Results were similar when restricted to studies with only oropharyngeal cancer cases, with oral rinse samples, or testing for HPV16 DNA (instead of any oncogenic HPV) in the oral samples. Among those who already have HNSCC, oral HPV detection has few false-positives but may miss one-half to one-quarter of HPV-related cases (false-negatives). Given these findings in cancer patients, the utility of oral rinses and swabs as screening tests for HPV-HNSCC among healthy populations is probably limited. Copyright © 2017 Elsevier Ltd. All rights reserved.
2010-09-01
400 and 300 h in neutral salt spray. 5 Similarly plated samples post treated with trivalent chromium rinse lasted 450 and 200 h in neutral salt...Accelerated Corrosion Results for Zinc/Nickel-Plated Automotive Parts Posttreated With Trivalent Chromate Rinse by Chris E. Miller, Brian E...Posttreated With Trivalent Chromate Rinse Chris E. Miller and Brian E. Placzankis Weapons and Materials Research Directorate, ARL I. Carl Handsy
Effect of stomaching on numbers of bacteria recovered from chicken skin
USDA-ARS?s Scientific Manuscript database
Compared to rinsing, stomaching releases only a few more bacteria from a skin sample, but successive rinses continue to remove almost as many bacteria as the first rinse. One hypothesis to explain this observation is that relatively violent treatment of skin generates smaller pieces of skin thus in...
Effect of stomaching on numbers of bacteria recovered from chicken skin
USDA-ARS?s Scientific Manuscript database
Stomaching of skin samples releases only a few more bacteria than a single rinse. Successive rinses, however, continue to remove almost as many bacteria as the first rinse. One hypothesis to explain this observation is that relatively violent treatment of skin generates smaller pieces of skin, thu...
Effects of a Novel Whitening Formulation on Dental Enamel
Takesh, Thair; Sargsyan, Anik; Anbarani, Afarin; Ho, Jessica; Wilder-Smith, Petra
2017-01-01
Objective The goal of this study was to evaluate the enamel whitening effects of 2 new test formulations, one of which was a rinse, and the other a whitening strip. Materials and Methods Forty enamel chips were prepared from 20 healthy extracted teeth (2 from each tooth). After pre-staining and colorimetry to measure L* and b* values, 20 matched samples were immersed in either test or control rinses, and then colorimetry was performed again after 1 hr, 2 hr, 3 hr, 6 hr, 12 hr, 24 hr and 48 hrs (Each hour equates to one month of clinical use at the recommended dosage of 1 minute exposure 2 times a day). The remaining 20 matched samples were exposed to the test or control whitening strips and colorimetry was performed every 30 minutes for a total of 10 treatments. Results Overall, the whitening performance of test and control strips was similar. The test and control rinses had a similar lightening effect over the first 3 hours (equivalent to 3 months of clinical use). Subsequently, the control rinse continued to lighten samples, whereas the test rinse had little further effect. Conclusion Test and control-whitening strips showed similar effects; over time whitening strips showed a greater lightening effect than whitening rinses. PMID:28706755
Thomas, Ann; Habib, Rishika
2017-01-01
Introduction With greater awareness worldwide, the use of herbs and herbal products has increased to a large extent. Objective To evaluate and compare the antimicrobial efficacy of green tea, garlic with lime, and 0.05% sodium fluoride (NaF) mouth rinses against Streptococcus mutans, Lactobacilli species, and Candida albicans. Materials and methods A total of 45 children aged 4 to 6 years with severe early childhood caries (S-ECC; based on decayed extracted filled [defs] score) were selected. Children were divided randomly into three equal groups and were asked to rinse with the prescribed mouth rinse once daily for 2 weeks after breakfast under supervision. A base-line and postrinsing nonstimulated whole salivary sample (2 mL) was collected and tested for the number of colony-forming units (CFUs). The data were statistically analyzed using Statistical Package for the Social Sciences (SPSS) version 16.0 software with one-way analysis of variance (ANOVA) and Tukey’s post hoc test. Results A statistically significant fall in colony count was found with the three mouth rinses in S. mutans (p < 0.001, p < 0.001) and Lactobacilli spp. (p < 0.001, p < 0.001), but not against C. albicans (p = 0.264, p = 0.264). On comparison, no statistically significant difference was found against S. mutans (p = 1, p = 0.554, p = 0.572), lactobacilli spp. (p = 0.884, p = 0.999, p = 0.819), and C. albicans (p = 0.999, p = 0.958, p = 0.983). Conclusion The findings of this study indicate that green tea and garlic with lime mouth rinse can be an economical alternative to NaF mouth rinse both for prevention and therapeutics. How to cite this article Thomas A, Thakur S, Habib R. Comparison of Antimicrobial Efficacy of Green Tea, Garlic with Lime, and Sodium Fluoride Mouth Rinses against Streptococcus mutans, Lactobacilli species, and Candida albicans in Children: A Randomized Double-blind Controlled Clinical Trial. Int J Clin Pediatr Dent 2017;10(3):234-239. PMID:29104381
Thomas, Ann; Thakur, Sneha; Habib, Rishika
2017-01-01
With greater awareness worldwide, the use of herbs and herbal products has increased to a large extent. To evaluate and compare the antimicrobial efficacy of green tea, garlic with lime, and 0.05% sodium fluoride (NaF) mouth rinses against Streptococcus mutans, Lactobacilli species, and Candida albicans. A total of 45 children aged 4 to 6 years with severe early childhood caries (S-ECC; based on decayed extracted filled [defs] score) were selected. Children were divided randomly into three equal groups and were asked to rinse with the prescribed mouth rinse once daily for 2 weeks after breakfast under supervision. A base-line and postrinsing nonstimulated whole salivary sample (2 mL) was collected and tested for the number of colony-forming units (CFUs). The data were statistically analyzed using Statistical Package for the Social Sciences (SPSS) version 16.0 software with one-way analysis of variance (ANOVA) and Tukey's post hoc test. A statistically significant fall in colony count was found with the three mouth rinses in S. mutans (p < 0.001, p < 0.001) and Lactobacilli spp. (p < 0.001, p < 0.001), but not against C. albicans (p = 0.264, p = 0.264). On comparison, no statistically significant difference was found against S. mutans (p = 1, p = 0.554, p = 0.572), lactobacilli spp. (p = 0.884, p = 0.999, p = 0.819), and C. albicans (p = 0.999, p = 0.958, p = 0.983). The findings of this study indicate that green tea and garlic with lime mouth rinse can be an economical alternative to NaF mouth rinse both for prevention and therapeutics. Thomas A, Thakur S, Habib R. Comparison of Antimicrobial Efficacy of Green Tea, Garlic with Lime, and Sodium Fluoride Mouth Rinses against Streptococcus mutans, Lactobacilli species, and Candida albicans in Children: A Randomized Double-blind Controlled Clinical Trial. Int J Clin Pediatr Dent 2017;10(3):234-239.
Scott, Kirstie R; Morgan, Ruth M; Jones, Vivienne J; Cameron, Nigel G
2014-08-01
Forensic geoscience is concerned with the analysis of geological materials in order to compare and exclude environmental samples from a common source, or to identify an unknown provenance in a criminal investigation. Diatom analysis is currently an underused technique within the forensic geoscience approach, which has the potential to provide an independent ecological assessment of trace evidence. This study presents empirical data to provide a preliminary evidence base in order to be able to understand the nature of diatom transfers to items of clothing, and the collection of transferred diatom trace evidence from a range of environments under experimental conditions. Three diatom extraction methods were tested on clothing that had been in contact with soil and water sites: rinsing in water (RW), rinsing in ethanol (RE), and submersion in H2O2 solution (H). Scanning electron microscopy (S.E.M.) analysis was undertaken in order to examine the degree of diatom retention on treated clothing samples. The total diatom yield and species richness data was recorded from each experimental sample in order to compare the efficacy of each method in collecting a representative sample for analysis. Similarity was explored using correspondence analysis. The results highlight the efficiency of H2O2 submersion in consistently extracting high diatom counts with representative species from clothing exposed to both aquatic and terrestrial sites. This is corroborated by S.E.M. analysis. This paper provides an important empirical evidence base for both establishing that diatoms do indeed transfer to clothing under forensic conditions in a range of environments, and in identifying that H2O2 extraction is the most efficient technique for the optimal collection of comparative samples. There is therefore potentially great value in collecting and analysing diatom components of geoforensic samples in order to aid in forensic investigation. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.
Ademovski, Seida Erovic; Persson, G Rutger; Winkel, Edwin; Tangerman, Albert; Lingström, Peter; Renvert, Stefan
2013-03-01
This study aims to assess the effects of rinsing with zinc- and chlorhexidine-containing mouth rinse with or without adjunct tongue scraping on volatile sulfur compounds (VSCs) in breath air, and the microbiota at the dorsum of the tongue. A randomized single-masked controlled clinical trial with a cross-over study design over 14 days including 21 subjects was performed. Bacterial samples from the dorsum of the tongue were assayed by checkerboard DNA-DNA hybridization. No halitosis (identified by VSC assessments) at day 14 was identified in 12/21 subjects with active rinse alone, in 10/21 with adjunct use of tongue scraper, in 1/21 for negative control rinse alone, and in 3/21 in the control and tongue scraping sequence. At day 14, significantly lower counts were identified only in the active rinse sequence (p < 0.001) for 15/78 species including, Fusobacterium sp., Porphyromonas gingivalis, Pseudomonas aeruginosa, Staphylococcus aureus, and Tannerella forsythia. A decrease in bacteria from baseline to day 14 was found in successfully treated subjects for 9/74 species including: P. gingivalis, Prevotella melaninogenica, S. aureus, and Treponema denticola. Baseline VSC scores were correlated with several bacterial species. The use of a tongue scraper combined with active rinse did not change the levels of VSC compared to rinsing alone. VSC scores were not associated with bacterial counts in samples taken from the dorsum of the tongue. The active rinse alone containing zinc and chlorhexidine had effects on intra-oral halitosis and reduced bacterial counts of species associated with malodor. Tongue scraping provided no beneficial effects on the microbiota studied. Periodontally healthy subjects with intra-oral halitosis benefit from daily rinsing with zinc- and chlorhexidine-containing mouth rinse.
Langevin, Scott M; Stone, Roslyn A; Bunker, Clareann H; Grandis, Jennifer R; Sobol, Robert W; Taioli, Emanuela
2010-05-01
Head and neck cancer represents 3.3% of all new malignancies and 2.0% of cancer deaths in the USA, the majority of which are squamous in origin. The overall 5 year survival is 60% and worsens with increasing stage at diagnosis. Thus, novel biomarkers for early detection of squamous cell carcinoma of the head and neck (SCCHN) are needed. MicroRNA-137 (miR-137) plays a role in cell cycle control and seems to undergo promoter methylation in oral squamous cell carcinoma tissue. The main objectives of this study were to ascertain whether miR-137 promoter methylation is detectable in oral rinse samples, assess its association with SCCHN and identify potential risk factors for its occurrence. Oral rinse samples were collected from 99 SCCHN patients with no prior history of cancer and 99 cancer-free controls, frequency matched on gender; tumor tissue for 64 patients was also tested. Methylation of the miR-137 promoter, assessed using methylation-specific polymerase chain reaction, was detected in 21.2% oral rinses from SCCHN patients and 3.0% from controls [odds ratio (OR) = 4.80, 95% confidence interval (CI): 1.23-18.82]. Among cases, promoter methylation of miR-137 was associated with female gender (OR = 5.30, 95% CI: 1.20-23.44) and inversely associated with body mass index (BMI) (OR = 0.88, 95% CI: 0.77-0.99). Promoter methylation of miR-137 appears to be a relatively frequently detected event in oral rinse of SCCHN patients and may have future utility as a biomarker in DNA methylation panels. The observed associations with gender and BMI help to shed light on potential risk factors for an altered methylation state in SCCHN.
NASA Astrophysics Data System (ADS)
Shiller, A. M.
2002-12-01
Methods for obtaining reliable dissolved trace element samples frequently utilize clean labs, portable laminar flow benches, or other equipment not readily transportable to remote locations. In some cases unfiltered samples can be obtained in a remote location and transported back to a lab for filtration. However, this may not always be possible or desirable. Additionally, methods for obtaining information on colloidal composition are likewise frequently too cumbersome for remote locations as well as being time-consuming. For that reason I have examined clean methods for collecting samples filtered through 0.45 and 0.02 micron syringe filters. With this methodology, only small samples are collected (typically 15 mL). However, with the introduction of the latest generation of ICP-MS's and microflow nebulizers, sample requirements for elemental analysis are much lower than just a few years ago. Thus, a determination of a suite of first row transition elements is frequently readily obtainable with samples of less than 1 mL. To examine the "traditional" (<0.45 micron) dissolved phase, 25 mm diameter polypropylene syringe filters and all polyethylene/polypropylene syringes are utilized. Filters are pre-cleaned in the lab using 40 mL of approx. 1 M HCl followed by a clean water rinse. Syringes are pre-cleaned by leaching with hot 1 M HCl followed by a clean water rinse. Sample kits are packed in polyethylene bags for transport to the field. Results are similar to results obtained using 0.4 micron polycarbonate screen filters, though concentrations may differ somewhat depending on the extent of sample pre-rinsing of the filter. Using this method, a multi-year time series of dissolved metals in a remote Rocky Mountain stream has been obtained. To examine the effect of colloidal material on dissolved metal concentrations, 0.02 micron alumina syringe filters have been utilized. Other workers have previously used these filters for examining colloidal Fe distributions in lake and sea water. Filters are pre-cleaned in the lab using clean pH 2 water followed by a clean water rinse and then dried with clean air. Because of the significant pressure that must be placed on the syringe for some minutes to effect a filtration, a simple plastic press and stand has been devised. Polarization artifacts, which can affect this type of ultra-filtration, do not appear to be significant. This may be due to the comparatively large pore size of these filters (equivalent to approx. 40 kDa). These filters, in combination with the 0.45 micron filters, are being used in a multi-year study of trace elements in the Yukon River system.
Oral Human Papillomavirus Detection in Older Adults Who Have Human Immunodeficiency Virus Infection
Fatahzadeh, Mahnaz; Schlecht, Nicolas F.; Chen, Zigui; Bottalico, Danielle; McKinney, Sharod; Ostoloza, Janae; Dunne, Anne; Burk, Robert D.
2014-01-01
Objective To evaluate reproducibility of oral rinse self-collection for HPV detection and investigate associations between oral HPV, oral lesions, immune and sociodemographic factors, we performed a cross-sectional study of older adults with HIV infection. Study Design We collected oral rinse samples from 52 subjects at two different times of day followed by an oral examination and interview. We identified HPV using PCR platforms optimized for detection of mucosal and cutaneous types. Results Eighty seven percent of individuals had oral HPV, of which 23% had oncogenic alpha, 40% had non-oncogenic alpha, and 46% had beta or gamma HPV. Paired oral specimens were concordant in all parameters tested. Significant associations observed for oral HPV with increased HIV viral load, hepatitis-C seropositivity, history of sexually transmitted diseases and lifetime number of sexual partners. Conclusions Oral cavity may be a reservoir of subclinical HPV in older adults who have HIV infection. Understanding natural history, transmission and potential implications of oral HPV warrants further investigations. PMID:23375488
Chang, Hubert; Blackburn, John; Grootveld, Martin
2013-12-01
Oral rinse formulations containing chlorite anion (ClO(2)(-)) as an active agent exert a range of valuable oral healthcare activities. However, salivary biomolecules which chemically react with this oxidant can, at least in principle, serve as potentially significant barriers to these therapeutic properties in the oral environment. Therefore, in this investigation, we have explored the extent of ClO(2)(-) consumption by biomolecules which scavenge this agent in human salivary supernatants (HSSs) in vitro. HSS samples were equilibrated with oral rinse formulations containing this active agent (30 s at 35 °C in order to mimic oral rinsing episodes). Differential spectrophotometric and ion-pair reversed-phase high-performance liquid chromatographic analyses were employed to determine residual ClO(2)(-) in these admixtures. Bioanalytical data acquired revealed the rapid consumption of ClO(2)(-) by biomolecular electron donors and/or antioxidants present in HSS samples. Mean ± 95 % confidence interval (CI) consumption levels of 7.14 ± 0.69 and 5.34 ± 0.69 % of the total ClO(2)(-) available were found for oral rinse products containing 0.10 and 0.40 % (w/v) ClO(2)(-), respectively. A mixed model analysis-of-variance performed on experimental data acquired demonstrated highly-significant differences between oral rinse ClO(2)(-) contents (p < 0.0001), trial participants (p < 0.001) and sampling days-within-participants (p < 0.001), and also revealed non-additive ClO(2)(-)-scavenging responses of participants' HSSs to increases in the oral rinse content of this oxidant (p < 0.0001). A slower, second phase of the reaction process (t (1/2) = 1.7-2.8 h) involved the oxidative consumption of salivary urate. These data clearly demonstrate that for recommended 30 s oral rinsing episodes performed at physiological temperature, <10 % of the total oral rinse ClO(2)(-) available is chemically and/or reductively consumed by HSS biomolecules for both oral rinse formulations investigated. These observations are of much clinical significance in view of the retention of these products' active agent, i.e. <10 % of ClO(2)(-) is consumed by HSS biomolecules within recommended 30 s oral rinsing episodes, and hence, the bulk of this oxyhalogen oxidant (>90 %) may effectively exert its essential microbicidal, anti-periodontal and oral malodour-neutralising actions.
Fecal Contamination on Produce from Wholesale and Retail Food Markets in Dhaka, Bangladesh.
Harris, Angela R; Islam, Mohammad Aminul; Unicomb, Leanne; Boehm, Alexandria B; Luby, Stephen; Davis, Jennifer; Pickering, Amy J
2018-01-01
Fresh produce items can become contaminated with enteric pathogens along the supply chain at the preharvest (e.g., irrigation water, soil, fertilizer) or postharvest (e.g., vendor handling or consumer handling) stages. This study assesses the concentrations of fecal indicator bacteria Escherichia coli , enterococci (ENT), and Bacteriodales on surfaces of carrots, eggplants, red amaranth leaves, and tomatoes obtained from both a wholesale market (recently harvested) and neighborhood retail markets in Dhaka, Bangladesh. We detected E. coli in 100% of carrot and red amaranth rinses, 92% of eggplant rinses, and 46% of tomato rinses. Using a molecular microbial source tracking assay, we found that 32% of produce samples were positive for ruminant fecal contamination. Fecal indicator bacteria were more likely to be detected on produce collected in retail markets compared with that in the wholesale market; retail market produce were 1.25 times more likely to have E. coli detected ( P = 0.03) and 1.24 times more likely to have ENT detected ( P = 0.03) as compared with wholesale market produce. Bacteriodales was detected in higher concentrations in retail market produce samples compared with wholesale market produce samples (0.40 log 10 gene copies per 100 cm 2 higher, P = 0.03). Our results suggest that ruminant and general fecal contamination of produce in markets in Dhaka is common, and suggest that unsanitary conditions in markets are an important source of produce fecal contamination postharvest.
Neutralizing salivary pH by mouthwashes after an acidic challenge.
Dehghan, Mojdeh; Tantbirojn, Daranee; Kymer-Davis, Emily; Stewart, Colette W; Zhang, Yanhui H; Versluis, Antheunis; Garcia-Godoy, Franklin
2017-05-01
The aim of the present study was to test the neutralizing effect of mouthwashes on salivary pH after an acidic challenge. Twelve participants were recruited for three visits, one morning per week. Resting saliva was collected at baseline and after 2-min swishing with 20 mL orange juice as an acidic challenge. Participants then rinsed their mouth for 30 s with 20 mL water (control), an over-the-counter mouthwash (Listerine), or a two-step mouthwash, randomly assigned for each visit. Saliva was collected immediately, 15, and 45 min after rinsing. The pH values of the collected saliva were measured and analyzed with anova, followed by Student-Newman-Keuls post-hoc test (significance level: 0.05). Orange juice significantly lowered salivary pH. Immediately after rinsing, Listerine and water brought pH back to baseline values, with the pH significantly higher in the Listerine group. The two-step mouthwash raised pH significantly higher than Listerine and water, and higher than the baseline value. Salivary pH returned to baseline and was not significantly different among groups at 15 and 45 min post-rinsing. Mouth rinsing after an acidic challenge increased salivary pH. The tested mouthwashes raised pH higher than water. Mouthwashes with a neutralizing effect can potentially reduce tooth erosion from acid exposure. © 2015 Wiley Publishing Asia Pty Ltd.
Elworthy, A; Greenman, J; Doherty, F M; Newcombe, R G; Addy, M
1996-06-01
The persistence of action, or substantivity, of antimicrobial agents in the mouth appears to be a major variable influencing plaque inhibition. Such substantivity can be assessed by measuring the duration and magnitude of suppression of salivary bacterial numbers produced by antimicrobial agents. Although this has been determined for some agents, there is little information on the substantivity of the numerous products which contain these and other antimicrobial agents. This study was commissioned on the basis that efficacy cannot be assumed merely because a product contains a known active agent. Nine formulations or products were chosen: 2 rinses containing chlorhexidine or C31G, 4 rinses containing cetylpyridinium chloride (CPC) (with and without fluoride and/or alcohol), a minus-CPC control rinse, and 2 toothpastes with and without stannous fluoride. Additionally, water was used as a placebo control. Twenty health dentate volunteers took part in this blind, 10 cell randomized, single rinse, cross-over study, which was balanced for carryover. Mouthrinses were 15 ml volumes and toothpastes 3 gm in 10 ml water slurries rinsed for 60 seconds. On the day of each study volunteers suspended oral hygiene habits and at approximately 9:00 a.m. rinsed with the allocated formulation. Unstimulated saliva samples were obtained immediately before and 30, 60, 180, 300, and 420 minutes after rinsing. The samples were immediately processed for total anaerobic bacterial counts. All rinses except water and the minus CPC control rinse produced significant falls in counts to 30 minutes. Of more relevance in this inter-treatment comparison-designed study, the C31G rinse showed significant substantivity compared to water only for 60 minutes. C31G was highly significantly less substantive than chlorhexidine from 30 minutes to 420 minutes. The CPC rinses were similar and significantly more substantive than their control rinse to between 180 and 300 minutes. The stannous fluoride and control pastes were similarly substantive to 300 minutes, with the stannous fluoride paste remaining substantive compared to water to 430 minutes. Based on antimicrobial action these formulations varied considerably in substantivity and this is likely to reflect their comparative plaque inhibitory properties.
Mallery, Susan R.; Budendorf, Deric E.; Larsen, Matthew P.; Pei, Ping; Tong, Meng; Holpuch, Andrew S.; Larsen, Peter E.; Stoner, Gary D.; Fields, Henry W.; Chan, Kenneth K.; Ling, Yonghua; Liu, Zhongfa
2011-01-01
Our oral cancer chemoprevention trial data implied that patient-specific differences in local retention and metabolism of freeze-dried black raspberries' (BRB) components affected therapeutic responsiveness. Subsequent studies have confirmed that anthocyanins are key contributors to BRB's chemopreventive effects. Consequently, functional assays, immunoblotting and immunohistochemical analyses to evaluate levels and distribution of BRB anthocyanin-relevant metabolic enzymes in human oral tissues were performed. LC-MS/MS analyses of time course saliva samples collected following BRB rinses were conducted to assess local pharmacokinetics and compare the capacities of three different BRB rinse formulations to provide sustained intraoral levels of anthocyanins. Protein profiles demonstrated the presence of key metabolic enzymes in all 15 oral mucosal tissues evaluated while immunohistochemistry confirmed these enzymes were distributed within surface oral epithelia and terminal salivary ducts. β-glucosidase assays confirmed that whole and microflora-reduced saliva can deglycosylate BRB anthocyanins, enabling generation of the bioactive aglycone, cyanidin. LC-MS/MS analyses demonstrated retention of parent anthocyanins and their functional, stable metabolite, protocatechuic acid, in saliva for up to 4 hours after rinsing. Furthermore, post-rinse saliva samples contained glucuronidated anthocyanin conjugates, consistent with intracellular uptake and Phase II conversion of BRB anthocyanins into forms amenable to local recycling. Our data demonstrate that comparable to the small intestine, the requisite hydrolytic, Phase II and efflux transporting enzymes necessary for local enteric recycling are present and functional in human oral mucosa. Notably, inter-patient differences in anthocyanin bioactivation and capacities for enteric recycling would impact treatment as retention of bioactivated chemopreventives at the target site would sustain therapeutic effectiveness. PMID:21558412
RECYCLING NICKEL ELECTROPLATING RINSE WATERS BY LOW TEMPERATURE EVAPORATION AND REVERSE OSMOSIS
Low temperature evaporation and reverse osmosis systems were each evaluated (on a pilot scale) on their respective ability to process rinse water collected from a nickel electroplating operation. Each system offered advantages under specific operating conditions. The low temperat...
USDA-ARS?s Scientific Manuscript database
This study compared surface and deep eggshell aerobic bacteria recovered by rinse and crush-and-rub sampling methods for commercial hatching eggs after treatments with sanitizers. Eggs were arranged into 5 treatments consisting of three sanitizers, Water, and No-treatment. Sanitizers were Hydrogen...
USDA-ARS?s Scientific Manuscript database
This study compared surface and deep eggshell aerobic bacteria recovered by rinse and crush-and-rub sampling methods for commercial hatching eggs after treatment with sanitizers. Eggs were arranged into 5 treatments consisting of No-treatment, Water, and three sanitizers. Sanitizers were Hydrogen ...
BPA qualtitative and quantitative assessment associated with orthodontic bonding in vivo.
Kloukos, Dimitrios; Sifakakis, Iosif; Voutsa, Dimitra; Doulis, Ioannis; Eliades, George; Katsaros, Christos; Eliades, Theodore
2015-08-01
To assess the in vivo amount of BPA released from a visible light-cured orthodontic adhesive, immediately after bracket bonding. 20 orthodontic patients were recruited after obtaining informed consent. All patients received 24 orthodontic brackets in both dental arches. In Group A (11 patients), 25 ml of tap water were used for mouth rinsing, whereas in Group B (9 patients) a simulated mouth rinse formulation was used: a mixture of 20 ml de-ionized water plus 5 ml absolute ethanol. Rinsing solutions were collected before, immediately after placing the orthodontic appliances and after washing out the oral cavity and were then stored in glass tubes. Rinsing was performed in a single phase for 60s with the entire volume of each liquid. The BPA analysis was performed by gas chromatography-mass spectrometry. An increase in BPA concentration immediately after the 1st post-bonding rinse was observed, for both rinsing media, which was reduced after the 2nd post-bonding rinse. Water exhibited higher levels of BPA concentration than water/ethanol after 1st and 2nd post-bonding rinses. Two-way mixed Repeated Measures ANOVA showed that the primary null hypothesis declaring mean BPA concentration to be equal across rinsing medium and rinsing status was rejected (p-value <0.001). The main effects of the rinsing medium and status, as well as their interaction were found to be statistically significant (p-values 0.048, <0.001 and 0.011 respectively). A significant pattern of increase of BPA concentration, followed by a decrease that reached the initial values was observed. The amount of BPA was relatively low and far below the reference limits of tolerable daily intake. Copyright © 2015. Published by Elsevier Ltd.
McKee, L H; Neish, L; Pottenger, A; Flores, N; Weinbrenner, K; Remmenga, M
2005-03-01
The effect of 15 consumable products, including juices, wines, and vinegar, used as rinsing agents on microbial loads of retail skinless, boneless chicken breasts was evaluated in two studies. Ten breasts were rinsed for 1 min with each solution. Samples were swabbed before and after rinsing with a cellulose sponge and evaluated for total aerobic (APC), total coliform (TCC), and generic Escherichia coli counts by Petrifilm methods. No differences were found in initial APC or TCC in either study, with initial mean APC ranging from 5.30 to 7.05 log CFU/cm2 and initial mean TCC ranging from 2.21 to 3.36 log CFU/cm2. In study 1, the APC for breasts rinsed with distilled white vinegar (3.22 log CFU/cm2) was lower than for those rinsed with all other solutions except cranberry juice cocktail (3.86 log CFU/cm2). The TCC for breasts rinsed with distilled white vinegar (0.00 log CFU/cm2) and cranberry juice cocktail (0.20 log CFU/cm2) were lower than those for all other solutions except 10% NaCl (0.43 log CFU/cm2) and 10% NaHCO3 (0.48 log CFU/cm2). In study 2, APC values for breasts rinsed with red wine (5.29 log CFU/cm2) and white wine (5.32 log CFU/cm2) were lower than for breasts rinsed with the other three solutions. The TCC after rinsing with chicken broth (4.48 log CFU/cm2) was higher than for all other solutions except Italian dressing. Although distilled white vinegar was the most effective rinsing agent, all solutions produced lower counts after rinsing, indicating that consumers could use rinsing to remove microorganisms from chicken breast surfaces prior to cooking.
Reduction of VSC and salivary bacteria by a multibenefit mouthrinse.
Boyd, T; Vazquez, J; Williams, M
2008-03-01
To evaluate the effectiveness of a multibenefit mouthrinse containing 0.05% cetylpyridinium chloride (CPC) and 0.025% sodium fluoride in reducing volatile sulfur compound (VSC) levels and total cultivable salivary bacteria, at both 4 h and overnight. In vitro analysis of efficacy was performed using saliva-coated hydroxyapatite disc substrates first treated with the mouthrinse, then exposed to whole human saliva, followed by overnight incubation in air-tight vials. Headspace VSC was quantified by gas chromatography (GC). A clinical evaluation was conducted with 14 subjects using a crossover design. After a seven-day washout period, baseline clinical measurement of VSC was performed by GC analysis of mouth air sampled in the morning prior to eating, drinking or performing any oral hygiene. A 10 mL saline rinse was used to sample and enumerate cultivable salivary bacterial levels via serial dilution and plating. Subjects were instructed to use the treatment rinse twice daily in combination with a controlled brushing regimen. After one week the subjects returned in the morning prior to eating, drinking or performing oral hygiene to provide samples of overnight mouth air and salivary bacteria. The subjects were then immediately rinsed with the test product, and provided additional mouth air and saliva rinse samples 4 h later. A multibenefit rinse containing 0.05% CPC and 0.025% sodium fluoride was found to reduce VSC in vitro by 52%. The rinse also demonstrated a significant clinical reduction in breath VSC (p < 0.05) of 55.8% at 4 h and 23.4% overnight relative to baseline VSC levels. At both time points, the multibenefit rinse was more effective than the control; this difference was statistically significant at the overnight time point (p < 0.05). Total cultivable salivary bacteria levels were also reduced significantly (p < 0.05) at 4 h and overnight by this mouthrinse compared to baseline levels and the control. A multibenefit mouthrinse was shown to reduce in vitro VSC levels via headspace analysis and clinically at the 4 h and overnight time points. A significant reduction in total cultivable salivary bacteria was also observed at all time points, supporting the VSC data.
van Loveren, C; Gerardu, V A M; Sissons, C H; van Bekkum, M; ten Cate, J M
2009-01-01
This clinical study evaluated the effect of different oral hygiene protocols on the bacterial composition of dental plaque. After a 2-week period of using fluoride-free toothpaste, 30 participants followed three 1-week experimental protocols, each followed by 2-week fluoride-free washout periods in a randomized crossover examiner-blind controlled trial. The 1-week experimental protocols comprised the use of AmF/SnF(2) toothpaste twice daily, after which participants either (1) rinsed with tap water, (2) did not rinse but only spat out the toothpaste, or (3) rinsed with an AmF/SnF(2) mouthwash. In the fluoride-free washout periods, the participants brushed their teeth with fluoride-free toothpaste without further instructions. Six hours after the last brushing (+/- rinsing) of each period, buccal plaque samples in the upper molar region were taken. The microbiota composition of the plaque samples was analyzed by checkerboard DNA:DNA hybridization. A statistically significant reduction was found in the total amount of DNA of the 39 major plaque species measured, and in the proportions of some acid-producing bacterial strains after the period having used the AmF/SnF(2) toothpaste + AmF/SnF(2) mouthrinsing. The results indicate that using the AmF/SnF(2) toothpaste and rinse combination could result in plaque of lower cariogenicity. Copyright 2009 S. Karger AG, Basel.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chandler, Darrell P.; Brown, Jeremy D.; Call, Douglas R.
2001-09-01
We describe the development and application of a novel electromagnetic flow cell and fluidics system for automated immunomagnetic separation of E. coli directly from unprocessed poultry carcass rinse, and the biochemical coupling of automated sample preparation with nucleic acid microarrays without cell growth. Highly porous nickel foam was used as a magnetic flux conductor. Up to 32% recovery efficiency of 'total' E. coli was achieved within the automated system with 6 sec contact times and 15 minute protocol (from sample injection through elution), statistically similar to cell recovery efficiencies in > 1 hour 'batch' captures. The electromagnet flow cell allowedmore » complete recovery of 2.8 mm particles directly from unprocessed poultry carcass rinse whereas the batch system did not. O157:H7 cells were reproducibly isolated directly from unprocessed poultry rinse with 39% recovery efficiency at 103 cells ml-1 inoculum. Direct plating of washed beads showed positive recovery of O 157:H7 directly from carcass rinse at an inoculum of 10 cells ml-1. Recovered beads were used for direct PCR amplification and microarray detection, with a process-level detection limit (automated cell concentration through microarray detection) of < 103 cells ml-1 carcass rinse. The fluidic system and analytical approach described here are generally applicable to most microbial detection problems and applications.« less
Raghavan, R; Burchett, M; Loffredo, D; Mulligan, J A
2000-04-01
A high-performance liquid chromatographic (HPLC) method is described for the determination of residual levels of cisplatin from extracts of surfaces with very low surface area; from extracts of surfaces of coupons made of Teflon (polytetrafluoroethylene, PTFE), stainless steel, and glass; and in aqueous solution collected after rinsing equipment and parts. Initially, the method was developed to determine cisplatin at concentrations ranging from 20 to 200 ng/ml by direct injection. Retaining the same method conditions, the scope of the method was expanded by the addition of a sample preconcentration step, allowing analyses at levels ranging from 0.5 ng to 20 ng/ml. Preconcentration is necessary for the determination of cisplatin in rinse waters at a quantifiable concentration of about 2 PPB. Under these conditions, the detection limit is about 0.2 to 0.3 ng/ml. Residual cisplatin on different types of surfaces, including surfaces with very low surface area, can be determined by swabbing each test surface with a derivatizing solution. The cisplatin recovered in the swabbing solution can be analyzed by HPLC using direct injection or preconcentration, depending on the expected level of cisplatin in the sample. Initial methods were developed to quantitate at a cisplatin concentration of about 100 PPB or higher in solution extracted from surfaces. However, when surface areas are limited because of the size of the parts, solution concentration becomes very low as a result of the minimum volume required for extraction. To support the application of swabbing techniques to surface analysis, stainless steel, Teflon, and glass surfaces were spiked with cisplatin at 2.5 to 20 ng/cm2. Satisfactory overall recoveries of 90% +/- 10% were obtained from all surfaces. Cisplatin has no ultraviolet/visible (UV/Vis) spectral-active functional group that can be used to detect low levels of cisplatin. Hence, diethyldithiocarbamate (DDTC) was used as a derivatizing agent to increase sensitivity to UV absorption at 340 nm. Diethyldithiocarbamate forms complexes with the platinum in cisplatin to yield a platinum-DDTC (Pt-DDTC) complex with a high molar-extinction coefficient. The Pt(DDTC)2 complex thus formed was chromatographically separated and the quantitated by comparison of its detector response to that of a similarly derivatized standard preparation. DDTC also has application as a cleaning agent for cisplatin (e.g., for production equipment cleaning, spill cleanup). Destruction of cisplatin can be affected by the reaction of cisplatin with this cleaning agent. Derivatization of cisplatin will convert active cisplatin to platinum-DDTC on surfaces or in solution. Final cleaning can be accomplished using a water-for-injection rinse. After such a cleaning process, the rinse water, when collected and analyzed, showed levels of free cisplatin less than the detection concentration of 0.2 PPB and a total platinum concentration less than 10 PPB as Pt-DDTC complex.
Creeth, Jonathan; Zero, Domenick; Mau, Melissa; Bosma, Mary Lynn; Butler, Andrew
2013-12-01
While toothpaste F(-) concentration and rinsing regimen have well-characterised impacts on fluoride's effectiveness, other aspects of brushing regimen have much less well-established effects, in particular, dentifrice quantity and brushing duration. An in vivo study (n = 42) of oral fluoride delivery (i.e. oral disposition post-brushing), and retention (i.e. concentration of F(-) in saliva post-brushing, a known efficacy predictor), was performed to compare effects observed with those of dentifrice F(-) concentration and rinsing regimen. Subjects brushed with a NaF-silica dentifrice (Aquafresh Advanced, 1,150 ppm F(-) ) or a control dentifrice (250 ppm F(-) , same base), for 45, 60, 120 or 180 seconds with 0.5 or 1.5 g dentifrice, and rinsed with 15 ml water once or three times in a cross-over design. The F(-) concentration was measured in post-brushing expectorate, rinse and toothbrush washing samples, and in saliva between 5-120 minutes after brushing. Using 1.5 g versus 0.5 g dentifrice increased F(-) in all samples: oral retention of F(-) was almost doubled by this increase. Increasing duration of brushing had more complex effects. The amount of F(-) in the expectorate increased but decreased in both rinse and toothbrush washing samples. Oral F(-) retention increased, but only in the period 30-120 minutes after brushing. Over the ranges investigated, the order of importance on oral F(-) retention was: dentifrice F(-) concentration > quantity > rinsing regimen > brushing duration. Hence, increasing dentifrice quantity and, to a lesser extent, the duration of brushing, can elevate oral fluoride post-brushing. Evidence is accumulating that the importance of these variables to fluoride efficacy may have been underestimated. © 2013 FDI World Dental Federation.
NASA Astrophysics Data System (ADS)
Xu, Xiaochun; Wang, Yu; Xiang, Jialing; Liu, Jonathan T. C.; Tichauer, Kenneth M.
2017-06-01
Conventional molecular assessment of tissue through histology, if adapted to fresh thicker samples, has the potential to enhance cancer detection in surgical margins and monitoring of 3D cell culture molecular environments. However, in thicker samples, substantial background staining is common despite repeated rinsing, which can significantly reduce image contrast. Recently, ‘paired-agent’ methods—which employ co-administration of a control (untargeted) imaging agent—have been applied to thick-sample staining applications to account for background staining. To date, these methods have included (1) a simple ratiometric method that is relatively insensitive to noise in the data but has accuracy that is dependent on the staining protocol and the characteristics of the sample; and (2) a complex paired-agent kinetic modeling method that is more accurate but is more noise-sensitive and requires a precise serial rinsing protocol. Here, a new simplified mathematical model—the rinsing paired-agent model (RPAM)—is derived and tested that offers a good balance between the previous models, is adaptable to arbitrary rinsing-imaging protocols, and does not require calibration of the imaging system. RPAM is evaluated against previous models and is validated by comparison to estimated concentrations of targeted biomarkers on the surface of 3D cell culture and tumor xenograft models. This work supports the use of RPAM as a preferable model to quantitatively analyze targeted biomarker concentrations in topically stained thick tissues, as it was found to match the accuracy of the complex paired-agent kinetic model while retaining the low noise-sensitivity characteristics of the ratiometric method.
Techathuvanan, Chayapa; Draughon, Frances Ann; D'Souza, Doris Helen
2011-02-01
Novel rapid Salmonella detection assays without the need for sophisticated equipment or labor remain in high demand. Real-time reverse transcriptase PCR (RT-PCR) assays, though rapid and sensitive, require expensive thermocyclers, while a novel RT loop-mediated isothermal amplification (RT-LAMP) method requires only a simple water bath. Our objective was to compare the detection sensitivity of Salmonella Typhimurium from the pork processing environment by RT-LAMP, RT-PCR, and culture-based assays. Carcass and surface swabs and carcass rinses were obtained from a local processing plant. Autoclaved carcass rinses (500 ml) were spiked with Salmonella Typhimurium and filtered. Filters were placed in stomacher bags containing tetrathionate broth (TTB) and analyzed with or without 10-h enrichment at 37 °C. Natural swabs were stomached with buffered peptone water, and natural carcass rinses were filtered, preenriched, and further enriched in TTB. Serially-diluted enriched samples were enumerated by spread plating on xylose lysine Tergitol 4 agar. RNA was extracted from 5 ml of enriched TTB with TRIzol. RT-LAMP assay using previously described invA primers was conducted at 62 °C for 90 min in a water bath with visual detection and by gel electrophoresis. SYBR Green I-based-real-time RT-PCR was carried out with invA primers followed by melt temperature analysis. The results of RT-LAMP detection for spiked carcass rinses were comparable to those of RT-PCR and cultural plating, with detection limits of 1 log CFU/ml, although they were obtained significantly faster, within 24 h including preenrichment and enrichment. RT-LAMP showed 4 of 12 rinse samples positive, while RT-PCR showed 1 of 12 rinse samples positive. For swabs, 6 of 27 samples positive by RT-LAMP and 5 of 27 by RT-PCR were obtained. This 1-day RT-LAMP assay shows promise for routine Salmonella screening by the pork industry. Copyright ©, International Association for Food Protection
Lagacé, Luc; Charron, Carmen; Sadiki, Mustapha
2017-05-01
A plastic tubing system operated under vacuum is usually used to collect sap from maple trees during spring time to produce maple syrup. This system is commonly sanitized with isopropyl alcohol (IPA) to remove microbial contamination colonizing the system during the sugar season. Questions have been raised whether IPA would contribute to the leaching of plastic residues in maple sap and syrup coming from sanitized systems. First, an extraction experiment was performed in the lab on commercial plastic tubing materials that were submitted to IPA under harsh conditions. The results of the GC-MS analysis revealed the presence of many compounds that served has target for further tests. Secondly, tests were done on early and mid-season maple sap and syrup coming from many sugarbushes using IPA or not to determine potential concentrations of plastic residues. Results obtained from sap and syrup samples showed that no quantifiable (< 1-75 μg/L) concentration of any plastic molecules tested was determined in all samples coming from IPA treated or not treated systems. However, some samples of first sap run used as a rinse solution to be discarded before the season start and that were coming from non sanitized or IPA sanitized systems, showed quantifiable concentrations of chemical residue such as ultraviolet protector (octabenzone). These results show that IPA can be safely used to sanitize maple sap collection system in regards to the leaching of plastic residues in maple sap and syrup and reinforced the need to thoroughly rinse the tubing system at the beginning of the season for both sanitized and non sanitized systems.
Testing of duplicate rinse aliquots for presence of Salmonella
USDA-ARS?s Scientific Manuscript database
Testing of chicken carcass rinses for Salmonella prevalence is often performed in duplicate because of the potential importance of the results, but anecdotal reports indicate that duplicate samples often disagree. This might be due to normal variation in microbiological methods or to the testing of...
McManus, Brenda A.; Maguire, Rory; Cashin, Phillipa J.; Claffey, Noel; Flint, Stephen; Abdulrahim, Mohammed H.
2012-01-01
This study investigated the prevalence and cell density of Candida species in periodontal pockets, healthy subgingival sites, and oral rinse samples of patients with untreated periodontitis. Twenty-one periodontitis patients underwent sampling at two periodontitis sites, and 19/21 of these patients underwent sampling at one periodontally healthy site. Both paper point and curette sampling techniques were employed. The periodontitis patients and 50 healthy subjects were also sampled by oral rinse. Candida isolates were recovered on CHROMagar Candida medium, and representative isolates were identified. Candida spp. were recovered from 10/21 (46.7%) periodontitis patients and from 16/50 (32%) healthy subjects. C. albicans predominated in both groups and was recovered from all Candida-positive subjects. Candida-positive periodontitis patients yielded Candida from periodontal pockets with average densities of 3,528 and 3,910 CFU/sample from curette and paper point samples, respectively, and 1,536 CFU/ml from oral rinse samples. The majority (18/19) of the healthy sites sampled from periodontitis patients were Candida negative. The 16 Candida-positive healthy subjects yielded an average of 279 CFU/ml from oral rinse samples. C. albicans isolates were investigated by multilocus sequence typing (MLST) to determine if specific clonal groups were associated with periodontitis. MLST analysis of 31 C. albicans isolates from periodontitis patients yielded 19 sequence types (STs), 13 of which were novel. Eleven STs belonged to MLST clade 1. In contrast, 16 C. albicans isolates from separate healthy subjects belonged to 16 STs, with 4 isolates belonging to clade 1. The distributions of STs between both groups were significantly different (P = 0.04) and indicated an enrichment of C. albicans isolates in periodontal pockets, which warrants a larger study. PMID:22875886
USDA-ARS?s Scientific Manuscript database
A regulatory agency (FSIS) in the U.S. rinses whole broiler carcasses with 400 ml of 1% buffered peptone water (BPW) for Salmonella detection, while the European Union (EU) samples a 25g composited neck skin from three carcasses. The purpose of the study was to evaluate the FSIS and EU procedures fo...
Overnight incubation of entire broiler carcass for increased detection of Salmonella
USDA-ARS?s Scientific Manuscript database
Introduction Broiler carcasses are generally sampled for presence of human pathogens such as Salmonella by whole carcass rinse and enrichment of a portion of the rinse. This may leave firmly attached cells out of the analysis potentially leading to false negative results. Purpose The objective of ...
USDA-ARS?s Scientific Manuscript database
The most frequently used methods to recover Salmonella from processed broiler chicken carcasses involve carcass rinsing or neck skin maceration. These methods are nondestructive and practical, but have limited sensitivity. The standard carcass rinse method uses only 7.5% of the residual rinsate an...
Cossi, Marcus Vinícius Coutinho; de Almeida, Michelle Vieira; Dias, Mariane Rezende; de Arruda Pinto, Paulo Sérgiode; Nero, Luís Augusto
2012-01-01
The type of sampling technique used to obtain food samples is fundamental to the success of microbiological analysis. Destructive and nondestructive techniques, such as tissue excision and rinsing, respectively, are widely employed in obtaining samples from chicken carcasses. In this study, four sampling techniques used for chicken carcasses were compared to evaluate their performances in the enumeration of hygiene indicator microorganisms. Sixty fresh chicken carcasses were sampled by rinsing, tissue excision, superficial swabbing, and skin excision. All samples were submitted for enumeration of mesophilic aerobes, Enterobacteriaceae, coliforms, and Escherichia coli. The results were compared to determine the statistical significance of differences and correlation (P < 0.05). Tissue excision provided the highest microbial counts compared with the other procedures, with significant differences obtained only for coliforms and E. coli (P < 0.05). Significant correlations (P < 0.05) were observed for all the sampling techniques evaluated for most of the hygiene indicators. Despite presenting a higher recovery ability, tissue excision did not present significant differences for microorganism enumeration compared with other nondestructive techniques, such as rinsing, indicating its adequacy for microbiological analysis of chicken carcasses.
Zipprich, Holger; Miatke, Sven; Hmaidouch, Rim; Lauer, Hans-Christoph
2016-01-01
This study aimed to test bacterial microleakage at the implant-abutment interface (IAI) before and after dynamic loading using a new chewing simulation. Fourteen implant systems (n = 5 samples of each) were divided into two groups: (1) systems with conical implant-abutment connections (IACs), and (2) systems with flat IACs. For collecting samples without abutment disconnection, channels (Ø = 0.3 mm) were drilled into implants perpendicularly to their axes, and stainless-steel cannulas were adhesively glued inside these channels to allow a sterilized rinsing solution to enter the implant interior and to exit with potential contaminants for testing. Implants were embedded in epoxy resin matrices, which were supported by titanium cylinders with lateral openings for inward and outward cannulas. Abutments were tightened and then provided with vertically adjustable, threaded titanium balls, which were cemented using composite cement. Specimens were immersed in a bacterial liquid and after a contact time of 15 minutes, the implant interior was rinsed prior to chewing simulation (0 N ≘ static seal testing). Specimens were exposed to a Frankfurt chewing simulator. Two hundred twenty force cycles per power level (110 in ± X-axis) were applied to simulate a daily masticatory load of 660 chewing cycles (equivalent to 1,200,000 cycles/5 years). The applied load was gradually increased from 0 N to a maximum load of 200 N in 25-N increments. The implant interior was rinsed to obtain samples before each new power level. All samples were tested using fluorescence microscopy; invading microorganisms could be counted and evaluated. No bacterial contamination was detected under static loading conditions in both groups. After loading, bacterial contamination was detected in one sample from one specimen in group 1 and in two samples from two specimens in group 2. Controlled dynamic loading applied in this study simulated a clinical situation and enabled time-dependent analysis regarding the bacterial seal of different implant systems. Conical IACs offer a better bacterial seal compared with flat IACs, which showed increased microleakage after dynamic loading. IAC design plays a crucial role in terms of bacterial colonization. Taking samples of the implant interior without abutment disconnection eliminates an error source.
Field methods for sampling and storing nectar from flowers with low nectar volumes.
Morrant, D S; Schumann, R; Petit, S
2009-02-01
Although several methods of sampling and storing floral nectar are available, little information exists on sampling and storing nectar from flowers with low nectar volumes. Methods for sampling and storing nectar from the flowers of species with low floral nectar volumes (<1 microL) were investigated using the flowers of Eucalyptus species. Sampling with microcapillary tubes, blotting up with filter paper, washing and rinsing were compared to determine masses of sugars recovered and differences in sugar ratios. Storage methods included room temperature, refrigeration and freezing treatments; the addition of antimicrobial agents benzyl alcohol or methanol to some of these treatments was also evaluated. Nectar samples were analysed using high-performance liquid chromatography and the masses of sucrose, glucose and fructose in each sample were determined. Masses of sugars varied significantly among sampling treatments, but the highest yielding methods, rinsing and washing, were not significantly different. A washing time of 1 min was as effective as one of 20 min. Storage trials showed that the sugar concentration measurements of nectar solutions changed rapidly, with the best results achieved for refrigeration with no additive (sucrose and fructose were stable for at least 2 weeks). Sugar ratios, however, remained relatively stable in most treatments and did not change significantly across 4 weeks for the methanol plus refrigerator and freezing treatments, and 2 weeks for the refrigeration treatment with no additive. Washing is recommended for nectar collection from flowers with low nectar volumes in the field (with the understanding that one wash underestimates the amounts of sugars present in a flower), as is immediate analysis of sugar mass. In view of the great variation in results depending on nectar collection and storage methods, caution should be exercised in their choice, and their accuracy should be evaluated. The use of pulsed amperometric detection, more specific than refractive index detection, may improve the accuracy of nectar sugar analysis.
Detection of Salmonella serotypes by overnight incubation of entire broiler carcass
USDA-ARS?s Scientific Manuscript database
Salmonella is a human bacterial pathogen that has been associated with poultry and poultry products. There are multiple ways to sample broiler chicken carcasses for the prevalence of Salmonella. A common method in the USA is a whole carcass rinse and culture of an aliquot of the rinse. The object...
USDA-ARS?s Scientific Manuscript database
Campylobacter presence on broiler carcasses in the U.S. is regulated. Processors may apply antimicrobial processing aids as a spray or immersion to lower contamination on carcasses. In the U.S., broiler carcasses are generally sampled by whole carcass rinse and the potential exists for residual le...
1991-01-01
aluminum foil-lined caps. Prior to use, glass jars and jugs for storage of PCB samples were washed with soap and water, rinsed with tap water, rinsed...technique used in this study. Because differences in solids-liquid separation techniques result in varying amounts of microparticles and/or organic
Effects of a non-rinse conditioner on the enamel of primary teeth.
Fava, Marcelo; Myaki, Silvio Issáo; Arana-Chavez, Victor Elias; Fava-de-Moraes, Flavio
2003-01-01
The aim of this in vitro study was to evaluate by scanning electron microscopy the morphological aspects of the enamel of primary teeth after etching with 36% phosphoric acid or a non-rinse conditioner. Ten naturally exfoliated anterior primary teeth were selected. The samples were subjected to prophylaxis with pumice paste and water using a low-speed hand piece. Etching was done on the buccal surface. Specimens were divided into 2 groups: G1 (n=10): etching with 36% phosphoric acid gel - Conditioner 36 (Dentsply) for 20 s, followed by water rinse for 15 s; G2 (n=10): etching with NRC - Non Rinse Conditioner (Dentsply) for 20 s, followed by air drying for 15 s. The samples were dehydrated, mounted on metal stubs, coated with gold and observed with Jeol JSM-6100 scanning electron microscope. Electron-micrographic analysis showed that both etching agents were effective for etching the enamel of primary teeth causing the formation of microporosities on the enamel surface, although the etching pattern was more effective with the use of 36% phosphoric acid gel.
The use of lithium as a marker for the retention of liquids in the oral cavity after rinsing.
Hanning, Sara M; Kieser, Jules A; Ferguson, Martin M; Reid, Malcolm; Medlicott, Natalie J
2014-01-01
The aim of this study was to validate the use of lithium as a marker to indicate the retention of simple liquids in the oral cavity and use this to determine how much liquid is retained in the oral cavity following 30 s of rinsing. This is a validation study in which saliva was spiked with known concentrations of lithium. Twenty healthy participants then rinsed their mouths with either water or a 1 % w/v carboxymethylcellulose (CMC) solution for 30 s before expectorating into a collection cup. Total volume and concentration of lithium in the expectorant were then measured, and the percentage of liquid retained was calculated. The mean amount of liquid retained was 10.4 ± 4.7 % following rinsing with water and 15.3 ± 4.1 % following rinsing with 1 % w/v CMC solution. This difference was significant (p < 0.01). Lithium was useful as a marker for the retention of liquids in the oral cavity, and a value for the amount of water and 1 % w/v CMC solution remaining in the oral cavity following a 30-s rinse was established. The present study quantifies the retention of simple fluids in the oral cavity, validating a technique that may be applied to more complex fluids such as mouth rinses. Further, the application of this method to specific population groups such as those with severe xerostomia may assist in developing effective saliva substitutes.
Effect of Irrigation Time of Antiseptic Solutions on Bone Cell Viability and Growth Factor Release.
Sawada, Kosaku; Nakahara, Ken; Haga-Tsujimura, Maiko; Fujioka-Kobayashi, Masako; Iizuka, Tateyuki; Miron, Richard J
2018-03-01
Antiseptic solutions are commonly utilized to treat local infection in the oral and maxillofacial region. However, surrounding vital bone is also exposed to antiseptic agents during irrigation and may have a potential negative impact on bone survival. The aim of the present study was therefore to investigate the effect of rinsing time with various antiseptic solutions on bone cell viability, as well as their subsequent release of growth factors important for bone regeneration. The bone samples collected from porcine mandible were rinsed in the following commonly utilized antiseptic solutions; povidone-iodine (0.5%), chlorhexidine digluconate (CHX, 0.2%), hydrogen peroxide (1%), and sodium hypochlorite (0.25%) for 1, 5, 10, 20, 30, or 60 minutes and assessed for cell viability and release of growth factors including vascular endothelial growth factor, transforming growth factor beta 1, bone morphogenetic protein 2, receptor activator of nuclear factor kappa-B ligand, and interleukin-1 beta by enzyme-linked immunosorbent assay. It was found in all the tested groups that the long exposure of any of the tested antiseptic solutions drastically promoted higher cell death. Sodium hypochlorite demonstrated the significantly highest cell death and at all time points. Interestingly, bone cell viability was highest in the CHX group post short-term rinsing of 1, 5, or 10 minutes when compared with the other 4 tested groups. A similar trend was also observed in subsequent growth factor release. The present study demonstrated that of the 4 tested antiseptic solutions, short-term CHX rinsing (ideally within 1 minute) favored bone cell viability and growth factor release. Clinical protocols should be adapted accordingly.
Influence of post-treatment strategies on the properties of activated chars from broiler manure.
Lima, Isabel M; Boykin, Debbie L; Thomas Klasson, K; Uchimiya, Minori
2014-01-01
There are a myriad of carbonaceous precursors that can be used advantageously to produce activated carbons or chars, due to their low cost, availability and intrinsic properties. Because of the nature of the raw material, production of granular activated chars from broiler manure results in a significant ash fraction. This study was conducted to determine the influence of several pre- and post-treatment strategies in various physicochemical and adsorptive properties of the resulting activated chars. Pelletized samples of broiler litter and cake were pyrolyzed at 700 °C for 1h followed by a 45 min steam activation at 800 °C at different water flow rates from 1 to 5 mL min(-1). For each activation strategy, samples were either water-rinsed or acid-washed and rinsed or used as is (no acid wash/rinse). Activated char's physicochemical and adsorptive properties towards copper ions were selectively affected by both pre- and post-treatments. Percent ash reduction after either rinsing or acid washing ranged from 1.1 to 15.1% but washed activated chars were still alkaline with pH ranging from 8.4 to 9.1. Acid washing or water rinsing had no significant effect in the ability of the activated char to adsorb copper ions, however it significantly affected surface area, pH, ash content and carbon content. Instead, manure type (litter versus cake) and the activation water flow rate were determining factors in copper ion adsorption which ranged from 38 mg g(-1) to 104 mg g(-1) of activated char. Moreover, strong positive correlations were found between copper uptake and concentration of certain elements in the activated char such as phosphorous, sulfur, calcium and sodium. Rinsing could suffice as a post treatment strategy for ash reduction since no significant differences in the carbon properties were observed between rinsed and acid wash treatments. Published by Elsevier Ltd.
Born, Hayley; Ruiz, Ryan; Verma, Avanti; Taliercio, Salvatore; Achlatis, Stratos; Pitman, Michael; Gandonu, Sonate; Bing, Renjie; Amin, Milan R; Branski, Ryan C
2014-12-01
To determine oral human papilloma virus (HPV) colonization in patients with adult-onset recurrent respiratory papillomatosis (AO-RRP) and their long-term partners. Prospective, cohort study Patients with pathology-confirmed AO-RRP and a small cohort of their long-term partners were subjected to a standardized oral rinse and swab protocol to obtain oral epithelial cells. DNA from these samples was extracted and subjected to both qualitative analyses via multiplex polymerase chain reaction as well as to a commercially available linear array assay for the determination of specific HPV subtypes. Samples were collected from 27 patients with AO-RRP and six long-term sexual partners. Qualitative analysis of agarose gel products using a multiple genotype primer cocktail suggested the presence of HPV DNA in oral rinse or swabs in 26 patients (96%) and four partner samples (67%). A subset of these positive patient samples was then subjected to genotyping; a spectrum of HPV subtypes was observed. Interestingly, HPV81 was identified in many samples. Recent data suggest that less than 7% of the general population is HPV positive in the oral cavity. Our data suggest that the oral colonization rate is much higher in patients with AO-RRP. Additionally, long-term sexual partners of patients with RRP had a much higher rate of HPV positivity. These preliminary data may have implications for viral transmission and provide a framework for enhanced patient education as well as further investigation. 4. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.
Quantifying In Situ Contaminant Mobility in Marine Sediments
2008-01-01
and rinsing the collection and sensor chambers and the circulation subsystem with prepared solutions is followed. For metals, a nitric acid soak/rinse...fluids beginning with tap water, then de-ionized water, then a special detergent (“RBS”), then de- ionized water, then nitric acid for metals or Methanol...component parts are soaked, four-hours minimum, in each fluid. A 25% concentration of ultra-pure nitric acid is used to soak Teflon™ parts (bottles, lids
No calcium-fluoride-like deposits detected in plaque shortly after a sodium fluoride mouthrinse.
Vogel, G L; Tenuta, L M A; Schumacher, G E; Chow, L C
2010-01-01
Plaque 'calcium-fluoride-like' (CaF(2)-like) and fluoride deposits held by biological/bacterial calcium fluoride (Ca-F) bonds appear to be the source of cariostatic concentrations of fluoride in plaque fluid. The aim of this study was to quantify the amounts of plaque fluoride held in these reservoirs after a sodium fluoride rinse. 30 and 60 min after a 228 microg/g fluoride rinse, plaque samples were collected from 11 volunteers. Each sample was homogenized, split into 2 aliquots (aliquots 1 and 2), centrifuged, and the recovered plaque fluid combined and analyzed using microelectrodes. The plaque mass from aliquot 1 was retained. The plaque mass from aliquot 2 was extracted several times with a solution having the same fluoride, calcium and pH as the plaque fluid in order to extract the plaque CaF(2)-like deposits. The total fluoride in both aliquots was then determined. In a second experiment, the extraction completeness was examined by applying the above procedure to in vitro precipitates containing known amounts of CaF(2)-like deposits. Nearly identical fluoride concentrations were found in both plaque aliquots. The extraction of the CaF(2)-like precipitates formed in vitro removed more than 80% of these deposits. The results suggest that either CaF(2)-like deposits were not formed in plaque or, if these deposits had been formed, they were rapidly lost. The inability to form persistent amounts of CaF(2)-like deposits in plaque may account for the relatively rapid loss of plaque fluid fluoride after the use of conventional fluoride dentifrices or rinses. (c) 2010 S. Karger AG, Basel.
No Calcium-Fluoride-Like Deposits Detected in Plaque Shortly after a Sodium Fluoride Mouthrinse
Vogel, G.L.; Tenuta, L.M.A.; Schumacher, G.E.; Chow, L.C.
2010-01-01
Plaque ‘calcium-fluoride-like’ (CaF2-like) and fluoride deposits held by biological/bacterial calcium fluoride (Ca-F) bonds appear to be the source of cariostatic concentrations of fluoride in plaque fluid. The aim of this study was to quantify the amounts of plaque fluoride held in these reservoirs after a sodium fluoride rinse. 30 and 60 min after a 228 μg/g fluoride rinse, plaque samples were collected from 11 volunteers. Each sample was homogenized, split into 2 aliquots (aliquots 1 and 2), centrifuged, and the recovered plaque fluid combined and analyzed using microelectrodes. The plaque mass from aliquot 1 was retained. The plaque mass from aliquot 2 was extracted several times with a solution having the same fluoride, calcium and pH as the plaque fluid in order to extract the plaque CaF2-like deposits. The total fluoride in both aliquots was then determined. In a second experiment, the extraction completeness was examined by applying the above procedure to in vitro precipitates containing known amounts of CaF2-like deposits. Nearly identical fluoride concentrations were found in both plaque aliquots. The extraction of the CaF2-like precipitates formed in vitro removed more than 80% of these deposits. The results suggest that either CaF2-like deposits were not formed in plaque or, if these deposits had been formed, they were rapidly lost. The inability to form persistent amounts of CaF2-like deposits in plaque may account for the relatively rapid loss of plaque fluid fluoride after the use of conventional fluoride dentifrices or rinses. PMID:20185917
Vera-Sempere, Francisco; Marzal, Cristina; Pellín-Carcelén, Ana; Martí-Bonmatí, Ezequiel; Bagan, Leticia
2012-01-01
Aim: The aim of this preliminary study was to detect cytological changes in the oral mucosa after using a mouth wash with alcohol. Material and Methods: A prospective double-blind, controlled study was performed, for 6 months. Group 1 consisted of 30 subjects who used a mouth rinse with 26.9% of alcohol [Listerine®] and Group 2 consisted of 30 subjects who used a mouth rinse with the same ingredients but with no alcohol. We obtained three cytological samples from the oral mucosa. The presence of cytological atypia, binucleation and karyorrhesis, and type of cells were studied. We also used a fluorescent in situ hybridization technique (FISH) in 15 samples in each group, for the micronucleus. Results: We found no clinical mucosal alteration after using the mouth wash at the end of the study in either group. We observed no cytological differences between the groups at the end of the study (p>0.05). Regarding the study of the micronucleus by FISH, we observed no significant difference between the groups (p>0.05). Conclusions: Our results showed no cytological alteration in patients using a mouth rinse with alcohol, but these findings should be considered preliminary results, to be confirmed in a greater sample of patients. Key words:Mouth wash, oral mucosa, cytological change, alcohol. PMID:23085712
White HDPE bottles as source of serious contamination of water samples with Ba and Zn.
Reimann, Clemens; Grimstvedt, Andreas; Frengstad, Bjørn; Finne, Tor Erik
2007-03-15
During a recent study of surface water quality factory new white high-density polyethylene (HDPE) bottles were used for collecting the water samples. According to the established field protocol of the Geological Survey of Norway the bottles were twice carefully rinsed with water in the field prior to sampling. Several blank samples using milli-Q (ELGA) water (>18.2 MOmega) were also prepared. On checking the analytical results the blanks returned values of Ag, Ba, Sr, V, Zn and Zr. For Ba and Zn the values (c. 300 microg/l and 95 microg/l) were about 10 times above the concentrations that can be expected in natural waters. A laboratory test of the bottles demonstrated that the bottles contaminate the samples with significant amounts of Ba and Zn and some Sr. Simple acid washing of the bottles prior to use did not solve the contamination problem for Ba and Zn. The results suggest that there may exist "clean" and "dirty" HDPE bottles depending on manufacturer/production process. When collecting water samples it is mandatory to check bottles regularly as a possible source of contamination.
USDA-ARS?s Scientific Manuscript database
A regulatory agency (FSIS) in the U.S. rinses individual broiler carcasses with 400 mL of 1% buffered peptone water (BPW) for Salmonella incidence detection, while the European Union (EU) uses a 25 g composited neck skin sample from three carcasses. Therefore, the objectives of the study were to ob...
Sanchez-Prado, Lucia; Alvarez-Rivera, Gerardo; Lamas, J Pablo; Lores, Marta; Garcia-Jares, Carmen; Llompart, Maria
2011-12-01
Matrix solid-phase extraction has been successfully applied for the determination of multi-class preservatives in a wide variety of cosmetic samples including rinse-off and leave-on products. After extraction, derivatization with acetic anhydride, and gas chromatography-mass spectrometry analysis were performed. Optimization studies were done on real non-spiked and spiked leave-on and rinse-off cosmetic samples. The selection of the most suitable extraction conditions was made using statistical tools such as ANOVA, as well as factorial experimental designs. The final optimized conditions were common for both groups of cosmetics and included the dispersion of the sample with Florisil (1:4), and the elution of the MSPD column with 5 mL of hexane/acetone (1:1). After derivatization, the extract was analyzed without any further clean-up or concentration step. Accuracy, precision, linearity and detection limits were evaluated to assess the performance of the proposed method. The recovery studies on leave-on and rinse-off cosmetics gave satisfactory values (>78% for all analytes in all the samples) with an average relative standard deviation value of 4.2%. The quantification limits were well below those set by the international cosmetic regulations, making this multi-component analytical method suitable for routine control. The analysis of a broad range of cosmetics including body milk, moisturizing creams, anti-stretch marks creams, hand creams, deodorant, shampoos, liquid soaps, makeup, sun milk, hand soaps, among others, demonstrated the high use of most of the target preservatives, especially butylated hydroxytoluene, methylparaben, propylparaben, and butylparaben.
IMPACT OF A RINSE STEP ON PROTEIN REMOVAL FROM SILICONE HYDROGEL CONTACT LENSES
Pucker, Andrew D.; Nichols, Jason J.
2010-01-01
PURPOSE To determine the impact of the rinse step in “no rub” contact lens care systems relative to its ability to assist in removing loosely associated and bound tear film proteins from a worn silicone hydrogel lens. METHODS After informed consent, subjects were fitted with lotrafilcon B contact lenses (CIBA Vision, Inc). If the fit was acceptable, subjects were asked to wear the lenses on a daily wear basis for 5 (+2, −0) days for an outcome visit. Subjects were instructed to use AQuify Multi-Purpose Disinfecting Solution (CIBA Vision, Inc) following the manufacturer's “no rub” instructions. At the outcome visit, contact lenses were then collected by a gloved examiner, with a sterile metal forceps, who rinsed the right lens but did not rinse the left lens upon removal from the eyes. Protein was extracted with a 50:50 0.2% trifluoroacetic acid-acetonitrile solution and quantified using a Bradford analyses. RESULTS Twenty contact lens wearers were enrolled in this study. For the non-rinsed lenses, the first extraction yielded 13.4 ± 9.2 µg/lens of protein, while the second extraction yielded 5.8 ± 2.8 µg/lens of protein. For the rinsed lenses, first extraction yielded an average of 3.0 ± 1.9 µg/lens of protein, while the second extraction yielded an average of 4.0 ± 2.3 µg/lens. Repeated measures ANOVA showed a significant interaction (F-statistic = 18.9, p< 0.0001) between the rinse of a lens and extraction number. CONCLUSIONS Rinsing a contact lens following removal from the eye removes well over one-half of the protein associated with it. Further, in order to biochemically recover all protein from a silicone hydrogel lens, it may be important to perform more than one chemical extraction from it. PMID:19609231
High pressure rinsing system comparison
DOE Office of Scientific and Technical Information (OSTI.GOV)
D. Sertore; M. Fusetti; P. Michelato
2007-06-01
High pressure rinsing (HPR) is a key process for the surface preparation of high field superconducting cavities. A portable apparatus for the water jet characterization, based on the transferred momentum between the water jet and a load cell, has been used in different laboratories. This apparatus allows to collected quantitative parameters that characterize the HPR water jet. In this paper, we present a quantitative comparison of the different water jet produced by various nozzles routinely used in different laboratories for the HPR process
Discoloration of Provisional Restorations after Oral Rinses
Turgut, Sedanur; Bagis, Bora; Ayaz, Elif Aydogan; Ulusoy, Kıvanç Utku; Altintas, Subutay Han; Korkmaz, Fatih Mehmet; Bagis, Nilsun
2013-01-01
Purpose: Oral rinses are widely used to promote periodontal health with provisional restorations during the interim period. The aim of this study was to compare the discoloration of provisional restoration materials with different oral rinses. Material and Methods: A total of 140 disc-shaped specimens (shade A2) (10 mm x 2 mm) were prepared from one PMMA-based (TemDent Classic®) and three different bis-acrylic-based (Protemp II®, Luxatemp® and Fill-In®) provisional restoration materials (n=7). The color values (L*, a*, and b*) of each specimen were measured before and after exposure with a colorimeter, and the color changes (∆E) were calculated according to the CIE L*a*b* system. The specimens were immersed in each of the 4 oral rinses (alcohol-containing mouthwash, chlorhexidine, benzydamine HCl, benzydamine HCl and chlorhexidine) twice a day for 2 minutes. After 2 minutes of immersion in the oral rinses, the specimens were immersed in artificial saliva. The specimens were exposed to the oral rinses and the artificial saliva for 3 weeks. Two-way ANOVA, the Bonferroni test and the paired sample t-test were used for statistical analyses (p<0.05). Results: Comparison of the discoloration from the oral rinses after immersion for three weeks revealed no significant differences (p>0.05). The lowest color change was observed in PMMA-based Temdent in all oral rinses (p<0.05). There were no significant differences between the bis-acryl composites after immersion in saliva or the mixture of benzydamine HCl and chlorhexidine and the alcohol-containing mouthwash for 3 weeks (p>0.05). After immersion in chlorhexidine, the color change values of Protemp II and Fill-in showed significant differences (p=0.018). Protemp II also showed less discoloration than the other bis-acryl composites, and this color change was statistically significant (p <0.05). For all oral rinses, the L* value decreased while b* values increased, and this color change was found to be statistically significant (p <0.05). A* values were found to be significantly higher with oral rinses (p<0.05), except Protemp II immersed in benzydamine HCl or alcohol-containing mouthwash. Conclusions: The type of the oral rinse did not affect the discoloration process. For long-term esthetic results, choosing MMA-based materials for provisional restorations appears to be more effective. PMID:24046524
Sahrmann, Philipp; Manz, Andrea; Attin, Thomas; Zbinden, Reinhard; Schmidlin, Patrick R
2015-07-01
To assess the effect of concomitant subgingival rinsing with 10% PVP-iodine during subgingival instrumentation on the prevalence and magnitude of bacteraemia of oral origin. Subgingival instrumentation was performed with water or PVP-iodine rinse in patients with periodontitis. Prior to instrumentation, subjects gargled for 1 min with the allocated liquid. Pockets were then rinsed for 1 min and subgingivally instrumented with liquid-cooled (water/PVP-iodine) ultrasonic scalers (1 min). Two minutes later, a blood sample from the arm vein was drawn using a lysis centrifugation blood culture system for quantitative microbiological analysis. Non-parametric statistical tests were performed to assess differences in the prevalence and extent of bacteraemia between groups. Of the 19 samples in each group, oral-borne bacteraemia was detected in 10 of the control and 2 of the test samples. With an average of 3.0 [1; 5] colony forming units, significantly less bacteria and bacteraemia were found in the test group compared to the controls (12.2 [1; 46]) (p = 0.003). Anaerobic bacteria were not found in the test group. Bacteraemia after subgingival instrumentation with concomitant PVP-iodine rinsing is reduced but not eliminated. Therefore, it might be recommended for patients at a high risk of endocarditis or infection of endoprostheses. However, preventive antibiotic treatment should not be omitted. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Ravaliya, Kruti; Garcia, Santos; Heredia, Norma; Fabiszewski de Aceituno, Anna; Bartz, Faith E.; Leon, Juan S.; Jaykus, Lee-Ann
2014-01-01
In recent decades, fresh and minimally processed produce items have been associated with an increasing proportion of food-borne illnesses. Most pathogens associated with fresh produce are enteric (fecal) in origin, and contamination can occur anywhere along the farm-to-fork chain. Microbial source tracking (MST) is a tool developed in the environmental microbiology field to identify and quantify the dominant source(s) of fecal contamination. This study investigated the utility of an MST method based on Bacteroidales 16S rRNA gene sequences as a means of identifying potential fecal contamination, and its source, in the fresh produce production environment. The method was applied to rinses of fresh produce, source and irrigation waters, and harvester hand rinses collected over the course of 1 year from nine farms (growing tomatoes, jalapeño peppers, and cantaloupe) in Northern Mexico. Of 174 samples, 39% were positive for a universal Bacteroidales marker (AllBac), including 66% of samples from cantaloupe farms (3.6 log10 genome equivalence copies [GEC]/100 ml), 31% of samples from tomato farms (1.7 log10 GEC/100 ml), and 18% of samples from jalapeño farms (1.5 log10 GEC/100 ml). Of 68 AllBac-positive samples, 46% were positive for one of three human-specific markers, and none were positive for a bovine-specific marker. There was no statistically significant correlation between Bacteroidales and generic Escherichia coli across all samples. This study provides evidence that Bacteroidales markers may serve as alternative indicators for fecal contamination in fresh produce production, allowing for determination of both general contamination and that derived from the human host. PMID:24212583
Quantifying oral inflammatory load: oral neutrophil counts in periodontal health and disease.
Landzberg, M; Doering, H; Aboodi, G M; Tenenbaum, H C; Glogauer, M
2015-06-01
Neutrophils are the primary white blood cells that are recruited to fight the initial phases of microbial infections. While healthy norms have been determined for circulating blood neutrophil counts in order to identify patients with suspected systemic infections, the levels of oral neutrophils (oPMNs) in oral health and in the presence of periodontal diseases have not been described. It is important to address this deficiency in our knowledge as neutrophils are the primary immune cell present in the crevicular fluid and oral environment and previous work has suggested that they may be good indicators of overall oral inflammation and periodontal disease severity. The objective of this study was to measure oPMN counts obtained in a standardized oral rinse from healthy patients and from those with chronic periodontal disease in order to determine if oPMN levels have clinical relevance as markers of periodontal inflammation. A parallel goal of this investigation was to introduce the concept of 'oral inflammatory load', which constitutes the inflammatory burden experienced by the body as a consequence of oral inflammatory disease. Periodontal examinations of patients with a healthy periodontium and chronic periodontal disease were performed (n = 124). Two standardized consecutive saline rinses of 30 s each were collected before patient examination and instrumentation. Neutrophils were quantified in the rinse samples and correlated with the clinical parameters and periodontal diagnosis. Average oPMN counts were determined for healthy patients and for those with mild, moderate and severe chronic periodontal diseases. A statistically significant correlation was found between oPMN counts and deep periodontal probing, sites with bleeding on probing and overall severity of periodontal disease. oPMN counts obtained through a 30-s oral rinse are a good marker of oral inflammatory load and correlate with measures of periodontal disease severity. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Nagata, Satoshi; Hamada, Tomofumi; Yamada, Norishige; Yokoyama, Seiya; Kitamoto, Sho; Kanmura, Yuji; Nomura, Masahiro; Kamikawa, Yoshiaki; Yonezawa, Suguru; Sugihara, Kazumasa
2012-09-01
The early detection of oral squamous cell carcinoma (OSCC) is important, and a screening test with high sensitivity and specificity is urgently needed. Therefore, in this study, the authors investigated the methylation status of tumor-related genes with the objective of establishing a noninvasive method for the detection of OSCC. Oral rinse samples were obtained from 34 patients with OSCC and from 24 healthy individuals (controls). The methylation status of 13 genes was determined by using methylation-specific polymerase chain reaction analysis and was quantified using a microchip electrophoresis system. Promoter methylation in each participant was screened by receiver operating characteristic analysis, and the utility of each gene's methylation status, alone and in combination with other genes, was evaluated as a tool for oral cancer detection. Eight of the 13 genes had significantly higher levels of DNA methylation in samples from patients with OSCC than in controls. The genes E-cadherin (ECAD), transmembrane protein with epidermal growth factor-like and 2 follistatin-like domains 2 (TMEFF2), retinoic acid receptor beta (RARβ), and O-6 methylguanine DNA methyltransferase (MGMT) had high sensitivity (>75%) and specificity for the detection of oral cancer. OSCC was detected with 100% sensitivity and 87.5% specificity using a combination of ECAD, TMEFF2, RARβ, and MGMT and with 97.1% sensitivity and 91.7% specificity using a combination of ECAD, TMEFF2, and MGMT. The aberrant methylation of a combination of marker genes present in oral rinse samples was used to detect OSCC with >90% sensitivity and specificity. The detection of methylated marker genes from oral rinse samples has great potential for the noninvasive detection of OSCC. Copyright © 2012 American Cancer Society.
Prevalence and Determinants of Oral Human Papillomavirus Infection in 500 Young Adults from Italy
Höfler, Daniela; Menegaldo, Anna; Giorgi Rossi, Paolo; Del Mistro, Annarosa; Da Mosto, Maria Cristina; Pawlita, Michael
2017-01-01
Although the prevalence of human papillomavirus (HPV)-related oropharyngeal squamous cell carcinoma (OPSCC) is increasing in developed countries and becoming a relevant health issue, the natural history of oral HPV infection is still unclear. Estimating the infection’s prevalence in specific populations and identifying risk factors can widen our understanding of its natural history and help to delineate appropriate prevention strategies. This study sought to (i) determine oral HPV prevalence and genotype distribution in a large series of young Italian adults, (ii) validate an oral rinse sampling/storage protocol, and (iii) pinpoint factors associated with oral HPV infection. Five hundred students, nurses, and technicians (19–35 years-old) studying and working at/for the University of Padua were recruited. Each participant was provided with an oral rinse sampling kit and instructions for use. They were also asked to complete an anonymous questionnaire concerning their demographic characteristics and behaviors. The questionnaires and oral rinse containers were labeled with the same identification code number. The oral rinse samples were tested using a bead-based multiplex BSGP5+/6+-MPG genotyping assay which amplifies the L1 region of 51 mucosal HPV types. The prevalence of oral HPV infection was 4.0% (95% confidence interval (CI), 2.5%-6.1%); those of 14 high-risk HPV types and of HPV-type 16 (HPV16) infection were 2.2% (95% CI, 1.1%-3.9%) and 1.6% (95% CI, 0.6%-3.1%), respectively. HPV16 was the most frequent genotype (40.0% of oral HPV infections). No association was found between oral infection and the co-variables studied (gender, tobacco, alcohol and illegal drug use, number of sex and oral sex partners, HPV vaccination status, history of HPV and sexually transmitted infections, abnormal pap smears, recurrent tonsillitis and tonsillectomy). The oral rinse sampling protocol outlined here proved to be simple, efficient and well tolerated, and the prevalence rate can be considered reliable and thus useful to guide future research. Determinants of oral HPV infection are still unclear and further studies are certainly warranted. PMID:28103272
Wipe-rinse technique for quantitating microbial contamination on large surfaces.
Kirschner, L E; Puleo, J R
1979-01-01
The evaluation of an improved wipe-rinse technique for the bioassay of large areas was undertaken due to inherent inadequacies in the cotton swab-rinse technique to which assay of spacecraft is currently restricted. Four types of contamination control cloths were initially tested. A polyester-bonded cloth (PBC) was selected for further evaluation because of its superior efficiency and handling characteristics. Results from comparative tests with PBC and cotton swabs on simulated spacecraft surfaces indicated a significantly higher recovery efficiency for the PBC than for the cotton (90.4 versus 75.2%). Of the sampling areas sites studied, PBC was found to be most effective on surface areas not exceeding 0.74 m2 (8.0 feet 2). PMID:394682
Wipe-rinse technique for quantitating microbial contamination on large surfaces
NASA Technical Reports Server (NTRS)
Kirschner, L. E.; Puleo, J. R.
1979-01-01
The evaluation of an improved wipe-rinse technique for the bioassay of large areas was undertaken due to inherent inadequacies in the cotton swab-rinse technique to which assay of spacecraft is currently restricted. Four types of contamination control cloths were initially tested. A polyester-bonded cloth (PBC) was selected for further evaluation because of its superior efficiency and handling characteristics. Results from comparative tests with PBC and cotton swabs on simulated spacecraft surfaces indicated a significantly higher recovery efficiency for the PBC than for the cotton (90.4 versus 75.2%). Of the sampling area sites studied, PBC was found to be most effective on surface areas not exceeding 0.74 sq m (8.0 sq ft).
Shukla, Shruti; Ahirwal, Laxmi; Bajpai, Vivek K.; Huh, Yun Suk; Han, Young-Kyu
2017-01-01
The inhibitory effects of Adhatoda vasica ethanolic leaf extract (AVELE) against Listeria monocytogenes were examined to assess its potential to preserve minimally processed meat products safely. The total phenolic, flavonoid, and alkaloid levels in AVELE were 10.09 ± 4.52 mg of gallic acid equivalents (GAE)/g, 22.43 ± 1.62 mg of quercetin equivalents/g, and 19.43 ± 3.90 mg/g, respectively. AVELE (1, 5, 10, or 20%) had considerable antibacterial effects against L. monocytogenes NCIM 24563 in terms of the inhibitory zones (7.4–13.6 mm), MIC (100 mg/mL or 10% formulated solution), reduced cell viability, potassium ion efflux, and the release of 260-nm absorbing materials and extracellular ATP. AVELE was used as a rinse solution (5, 10, and 20%) for raw chicken breast meat. A 20% rinsing solution applied for 60 min inhibited the L. monocytogenes NCIM 24563 counts significantly on raw chicken breast meat. Moreover, L. monocytogenes NCIM 24563 did not grow in the meat sample when the rinse time was increased to 90 min at the same concentration. L. monocytogenes showed a greater reduction to ~3 CFU/g after rinsing with a 10 and 20% AVELE solution for 30 min than with a 5% AVELE solution. The rinsing processes with AVELE produced the final cooked chicken products with higher sensory attribute scores, such as taste, juiciness, and tenderness, compared to the control group along with a decrease in microbial contamination. Chicken meat rinsed with AVELE (rinsing time of 90 min) showed better sensory attribute scores of juiciness and tenderness, as well as the overall sensory quality compared to the untreated group. This research highlights the effectiveness of AVELE against L. monocytogenes NCIM 24563, suggesting that AVELE can be used as an effective antimicrobial marinade and/or a rinse for meat preservation. PMID:28769879
Izumi, Hidemi; Inoue, Ayano
2018-02-02
The extent of sublethally injured coliform bacteria on shredded cabbage, either rinsed or not rinsed with electrolyzed water, was evaluated during storage in air and high CO 2 controlled atmospheres (5%, 10%, and 15%) at 5°C and 10°C using the thin agar layer (TAL) method. Sublethally injured coliform bacteria on nonrinsed shredded cabbage were either absent or they were injured at a 64-65% level when present. Rinsing of shredded cabbage with electrolyzed water containing 25ppm available chlorine reduced the coliform counts by 0.4 to 1.1 log and caused sublethal injury ranging from 42 to 77%. Pantoea ananatis was one of the species injured by chlorine stress. When shredded cabbage, nonrinsed or rinsed with electrolyzed water, was stored in air and high CO 2 atmospheres at 5°C for 7days and 10°C for 5days, coliform counts on TAL plates increased from 3.3-4.5 to 6.5-9.0 log CFU/g during storage, with the increase being greater at 10°C than at 5°C. High CO 2 of 10% and 15% reduced the bacterial growth on shredded cabbage during storage at 5°C. Although injured coliform bacteria were not found on nonrinsed shredded cabbage on the initial day, injured coliforms at a range of 49-84% were detected on samples stored in air and high CO 2 atmospheres at 5°C and 10°C. Injured cells were detected more frequently during storage at both temperatures irrespective of the CO 2 atmosphere when shredded cabbage was rinsed with electrolyzed water. These results indicated that injured coliform bacteria on shredded cabbage, either rinsed or not rinsed with electrolyzed water, exhibited different degrees of injury during storage regardless of the CO 2 atmosphere and temperature tested. Copyright © 2017 Elsevier B.V. All rights reserved.
A randomised clinical evaluation of a fluoride mouthrinse and dentifrice in an in situ caries model.
Parkinson, Charles R; Hara, Anderson T; Nehme, Marc; Lippert, Frank; Zero, Domenick T
2018-03-01
Fluoride mouthrinses provide advantages for fluoride delivery by maintaining elevated intra-oral fluoride concentrations following fluoride dentifrice use. This in situ caries study investigated potential anti-caries efficacy of a 220 ppm fluoride mouthrinse. This was an analyst-blinded, four-treatment, randomised, crossover study using partially demineralised, gauze-wrapped, human enamel samples mounted in a mandibular partial denture. Participants brushed twice daily for 14 days with either a 1150 ppm fluoride or a fluoride-free placebo dentifrice and either rinsed once daily with the 220 ppm fluoride mouthrinse or not. Following each treatment period, percent surface microhardness recovery (%SMHR) and enamel fluoride uptake (EFU) were assessed. Fifty three participants completed the study. Compared with the placebo dentifrice/no rinse treatment, the fluoride-containing regimens demonstrated greater enamel remineralisation (%SMHR) and fluoridation (EFU): fluoride dentifrice/fluoride rinse (%SMHR difference: 21.55 [95% CI: 15.78,27.32]; EFU difference 8.35 [7.21,9.29]); fluoride dentifrice/no rinse: 19.48 [13.81,25.15]; 6.47 [5.35,7.60]; placebo dentifrice/fluoride rinse: 16.76 [11.06,22.45]; 5.87 [4.72,7.00] (all P < .0001). There were no significant differences in%SMHR between fluoride regimens. The fluoride dentifrice/fluoride rinse regimen was associated with higher EFU than the fluoride dentifrice/no rinse (1.88 [0.75,3.01], P = .0013) and placebo dentifrice/fluoride rinse regimens (2.48 [1.34,3.62], P < .0001). Treatments were generally well-tolerated. The in situ caries model demonstrated that the fluoride mouthrinse is effective in promoting enamel caries lesion remineralisation and fluoridation whether used following a fluoride or non-fluoride dentifrice. Additive (potential) anti-caries benefits of a fluoride rinse after a fluoride dentifrice were confined to enhancements in lesion fluoridation (EFU). In conjunction with a fluoride dentifrice, fluoride mouthrinses enhance enamel fluoridation, which may be useful in caries prevention. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.
Huang, B-S; Wu, S-C; Lin, C-Y; Fan, K-H; Chang, J T-C; Chen, S-C
2018-03-01
Radiation therapy (RT) and concurrent chemotherapy RT (CCRT) generate radiation-induced oral mucositis (OM) and lower quality of life (QOL). This study assessed the impact of a saline mouth rinse regimen and education programme on radiation-induced OM symptoms, and QOL in oral cavity cancer (OCC) patients receiving RT or CCRT. Ninety-one OCC patients were randomly divided into a group that received saline mouth rinses and an education programme and a control group that received standard care. OM symptoms and QOL were assessed with the WHO Oral Toxicity Scale, MSS-moo and UW-QOL. Data were collected at the first postoperative visit to the radiation department (T0) and at 4 weeks and 8 weeks after beginning RT or CCRT. Patients in both groups had significantly higher levels of physical and social-emotional QOL at 8 weeks after beginning RT or CCRT compared to the first visit. Patients in the saline rinse group had significantly better physical and social-emotional QOL as compared to the standard care group at 8 weeks. Radiation-induced OM symptoms and overall QOL were not different between the groups. We thus conclude the saline rinse and education programme promote better physical and social-emotional QOL in OCC patients receiving RT/CCRT. © 2018 John Wiley & Sons Ltd.
Microbiological analysis of debris from STS-42 IML-1 by direct plating of rinse waters
NASA Technical Reports Server (NTRS)
Smithers, G. A.
1992-01-01
Microbial analysis of air filter debris from the Spacelab International Microgravity Laboratory-1 (IML-1) mission was performed via direct plating of rinse waters on a battery of selective and nonselective nutrient agars. Microbial isolates were identified using Minitek and Biolog technologies. Twenty-four types of bacteria were recovered and classified; a similar number of fungal types was observed, but these were not identified. This procedure can provide information about the proportions of organism types present at the time of debris collection.
Impact of feathers and feather follicles on broiler carcass bacteria.
Cason, J A; Hinton, A; Buhr, R J
2004-08-01
Genetically featherless and feathered broiler siblings were used to test the contribution of feathers and feather follicles to the numbers of aerobic bacteria, Escherichia coli, and Campylobacter in whole-carcass rinse samples taken immediately after carcasses were defeathered for 30 or 60 s. Numbers of spoilage bacteria were counted after the same fully processed carcasses were stored for 1 wk at 2 degrees C. In each of 3 replications, twenty-eight 11-wk-old, mixed-sex, genetically featherless or feathered broilers were processed in a laboratory processing facility. Immediately after individual defeathering in a mechanical picker, carcasses were sampled using a carcass rinse technique. Carcasses were eviscerated, immersion chilled at 2 degrees C for 30 min, individually bagged, and stored for 1 wk at 2 degrees C, after which all carcasses were rinsed again, and spoilage bacteria in the rinsate were enumerated. There were no significant differences (P < or = 0.05) between the featherless and feathered broilers in numbers of aerobic bacteria, E. coli, and Campylobacter in rinse samples taken immediately after defeathering and no differences between carcasses picked for 30 or 60 s. There were no differences in numbers of spoilage bacteria after 1 wk of refrigeration for any of the feather presence-picking length combinations. Although the defeathering step in poultry processing has been identified as an opportunity for bacterial contamination from the intestinal tract and cross-contamination between carcasses, the presence of feathers and feather follicles does not make a significant difference in carcass bacterial contamination immediately after defeathering or in spoilage bacteria after 1 wk of refrigeration.
Wolfe, Marlene K; Gallandat, Karin; Daniels, Kyle; Desmarais, Anne Marie; Scheinman, Pamela; Lantagne, Daniele
2017-01-01
To prevent Ebola transmission, frequent handwashing is recommended in Ebola Treatment Units and communities. However, little is known about which handwashing protocol is most efficacious. We evaluated six handwashing protocols (soap and water, alcohol-based hand sanitizer (ABHS), and 0.05% sodium dichloroisocyanurate, high-test hypochlorite, and stabilized and non-stabilized sodium hypochlorite solutions) for 1) efficacy of handwashing on the removal and inactivation of non-pathogenic model organisms and, 2) persistence of organisms in rinse water. Model organisms E. coli and bacteriophage Phi6 were used to evaluate handwashing with and without organic load added to simulate bodily fluids. Hands were inoculated with test organisms, washed, and rinsed using a glove juice method to retrieve remaining organisms. Impact was estimated by comparing the log reduction in organisms after handwashing to the log reduction without handwashing. Rinse water was collected to test for persistence of organisms. Handwashing resulted in a 1.94-3.01 log reduction in E. coli concentration without, and 2.18-3.34 with, soil load; and a 2.44-3.06 log reduction in Phi6 without, and 2.71-3.69 with, soil load. HTH performed most consistently well, with significantly greater log reductions than other handwashing protocols in three models. However, the magnitude of handwashing efficacy differences was small, suggesting protocols are similarly efficacious. Rinse water demonstrated a 0.28-4.77 log reduction in remaining E. coli without, and 0.21-4.49 with, soil load and a 1.26-2.02 log reduction in Phi6 without, and 1.30-2.20 with, soil load. Chlorine resulted in significantly less persistence of E. coli in both conditions and Phi6 without soil load in rinse water (p<0.001). Thus, chlorine-based methods may offer a benefit of reducing persistence in rinse water. We recommend responders use the most practical handwashing method to ensure hand hygiene in Ebola contexts, considering the potential benefit of chlorine-based methods in rinse water persistence.
Improved Detection Technique for Solvent Rinse Cleanliness Verification
NASA Technical Reports Server (NTRS)
Hornung, S. D.; Beeson, H. D.
2001-01-01
The NASA White Sands Test Facility (WSTF) has an ongoing effort to reduce or eliminate usage of cleaning solvents such as CFC-113 and its replacements. These solvents are used in the final clean and cleanliness verification processes for flight and ground support hardware, especially for oxygen systems where organic contaminants can pose an ignition hazard. For the final cleanliness verification in the standard process, the equivalent of one square foot of surface area of parts is rinsed with the solvent, and the final 100 mL of the rinse is captured. The amount of nonvolatile residue (NVR) in the solvent is determined by weight after the evaporation of the solvent. An improved process of sampling this rinse, developed at WSTF, requires evaporation of less than 2 mL of the solvent to make the cleanliness verification. Small amounts of the solvent are evaporated in a clean stainless steel cup, and the cleanliness of the stainless steel cup is measured using a commercially available surface quality monitor. The effectiveness of this new cleanliness verification technique was compared to the accepted NVR sampling procedures. Testing with known contaminants in solution, such as hydraulic fluid, fluorinated lubricants, and cutting and lubricating oils, was performed to establish a correlation between amount in solution and the process response. This report presents the approach and results and discusses the issues in establishing the surface quality monitor-based cleanliness verification.
On wiping the interior walls of 37-mm closed-face cassettes: an OSHA perspective.
Hendricks, Warren; Stones, Fern; Lillquist, Dean
2009-12-01
As early as 1976, Occupational Safety and Health Administration (OSHA) methods for analyzing metal samples collected using 37-mm polystyrene closed-face cassettes specified that any loose dust be transferred from the cassette to the digestion vessel, that the cassette be rinsed, and that, if necessary, the cassette be wiped out to help ensure that all particles that enter the cassette are included along with the filter as part of the sample for analysis. OSHA analytical methods for metal analysis were recently revised to explicitly require cassette wiping for all metal samples. This change was based on policy that any material entering the collection device constitutes part of the sample and on OSHA Salt Lake Technical Center research showing that invisible residue on the cassette walls can significantly contribute to the total sample results reported. OSHA procedures are consistent with guidance given in the NIOSH Manual of Analytical Methods. This guidance concludes that internal deposits in sampling cassettes should be included in the analysis and that one way to accomplish this would be to wipe or wash the internal surfaces of the cassette and include the material along with the filter for analysis.
Conde, A J; Estevez, R; Loroño, G; Valencia de Pablo, Ó; Rossi-Fedele, G; Cisneros, R
2017-10-01
To compare soft-tissue dissolution by sodium hypochlorite, with an EDTA intermediate rinse, with or without activation with passive ultrasonic activation (PUI) or sonic activation using the Endoactivator (EA) or Eddy tips (ED). The root canals of eighty-three human maxillary central incisors were chemo-mechanically prepared and the teeth split. A standardized longitudinal intracanal groove was created in one of the root halves. Eighty-three porcine palatal mucosa samples were collected, adapted to fit into the grooves and weighed. The re-assembled specimens were randomly divided into four experimental groups (n = 20), based on the final rinse: no activation; EA; PUI; ED, using 2.5% sodium hypochlorite, with an EDTA intermediate rinse. A control group (n = 3) was irrigated with distilled water without activation. The solutions were delivered using a syringe and needle 2 mm from working length. Total irrigation time was 150 s, including 60 s of activation in the specific groups. The study was carried out at 36 ± 2 °C. The porcine palatal mucosa samples were weighed after completion of the assays. Student paired t-test and anova were used to assess the intra- and intergroup weight changes. The multiple comparisons were evaluated using Bonferroni correction (α = 0.05). Weight loss occurred in all experimental groups. Irrigant activation resulted in greater weight loss when compared to the nonactivated group [vs. EA (P = 0.001); vs. PUI (P < 0.001); vs. ED (P < 0.001)]. No significant differences were found amongst the different activation systems. Activation increased the tissue-dissolving activity of irrigants from artificial grooves in root canals of maxillary central incisors. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.
Factors Affecting the Discharge of Micro-Plastic Fibers from Household Laundry
NASA Astrophysics Data System (ADS)
Lange, N.
2017-12-01
Every day millions of loads of laundry are done in in the United States alone. Many, if not most, include synthetic fibers. During washing, micro-plastic fibers are released from the fabric, and discharged into the wastewater. These fibers have been detected in fresh water throughout the world and all of the oceans. These micro-plastic fibers are an emerging environmental contaminant that can adversely affect wildlife and are highly bio-accumulated in aquatic food-chains. Additionally, like other plastics, micro-fibers are not readily biodegraded and persist in the environment for a long time. In this research, I explored the effect of the way we wash clothes on the amount of micro-plastic fibers that are shed by common clothing materials containing man-made fibers. I collected discharge samples from wash and rinse cycles of a washing machine. I collected samples from a control wash using no detergent and then repeated five times. Next, I repeated the experiment five times using four different types of detergent. Large amounts of micro-plastic fibers were released during all wash cycles. However, the numbers decreased during the later rinse cycles. The use of laundry detergent increased the number of micro-plastic fibers released into the wash-water. Deep cleaning detergents produced over ten times more fibers than the no-detergent control. The gentlest detergent only released two times more fibers than the control. Therefore, it would be possible to affect the number of fibers released into the wastewater simply by selection of detergent. The ultimate goal of my research is to develop an optimized detergent that minimizes the number of micro-plastic fibers generated by washing and still effectively clean clothes.
Jackson, Darryl D.; Hollen, Robert M.
1983-01-01
A new automatable cleaning apparatus which makes use of a method of very thoroughly and quickly cleaning a gauze electrode used in chemical analyses is given. The method generates very little waste solution, and this is very important in analyzing radioactive materials, especially in aqueous solutions. The cleaning apparatus can be used in a larger, fully automated controlled potential coulometric apparatus. About 99.98% of a 5 mg. plutonium sample was removed in less than 3 minutes, using only about 60 ml. of rinse solution and two main rinse steps.
Exhaled breath condensate pH assays are not influenced by oral ammonia
Wells, K; Vaughan, J; Pajewski, T; Hom, S; Ngamtrakulpanit, L; Smith, A; Nguyen, A; Turner, R; Hunt, J
2005-01-01
Background: Measurement of pH in exhaled breath condensate (EBC) is robust and simple. Acidic source fluid (airway lining fluid) traps bases while volatilising acids, leading to EBC acidification in many lung diseases. Lower airway ammonia is one determinant of airway lining fluid pH, raising the concern that addition of the base ammonia by contamination from the mouth might confound EBC pH assays. Methods: Three discrete methods were used to limit oral ammonia contamination of EBC collections: endotracheal intubation, oral rinsing, and –40°C condenser temperatures. Separately, ammonia was removed from collected EBC samples by lyophilisation and resuspension. Intraweek and intraday variability of ammonia concentration was determined in 76 subjects, and ammonia and pH from a further 235 samples were graphically compared. Ammonia was assayed spectrophotometrically and pH was assessed after deaeration. Results: Data from 1091 samples are presented. Ammonia was reduced in EBC by all methods. Endotracheal intubation decreased EBC ammonia from a mean (SD) of 619 (124) µM to 80 (24) µM (p<0.001, n = 32). Oral rinsing before collection also led to a decline in EBC ammonia from 573 (307) µM to 224 (80) µM (p = 0.016, n = 7). The colder the condensation temperature used, the less ammonia was trapped in the EBC. Lyophilisation removed 99.4 (1.9)% of ammonia. Most importantly, the pH of EBC never decreased after removal of ammonia by any of these methods. Intraweek and intraday coefficients of variation for ammonia were 64 (27)% and 60 (32)%, which is substantially more variable than EBC pH assays. Conclusions: Although ammonia and pH appear to correlate in EBC, the oral ammonia concentration is not an important determinant of EBC pH. No precautions need to be taken to exclude oral ammonia when EBC pH is of interest. The low pH and low ammonia found in EBC from patients with lung diseases appear to be independent effects of volatile compounds arising from the airway. PMID:15618579
Assessing the impact of egg sweating on Salmonella Enteritidis penetration into shell eggs.
Gradl, Janet A; Curtis, Patricia A; Jones, Deana R; Anderson, Kenneth E
2017-07-01
Salmonella Enteritidis (SE) prevalence in eggs is a major concern to the egg industry. Some research has shown that egg sweating can increase Salmonella penetration into egg contents when refrigerated eggs are moved to a warmer temperature. This occurs when eggs are tempered before wash, to minimize thermal cracks. The effect of egg sweating on SE penetration into shell eggs over a 6 week storage period at 4°C was assessed. A 2 × 2 factorial of SE inoculation and egg sweating was utilized. Treatments included (SES) nalidixic acid (NA)-resistant SE inoculated and sweated, (SENS) NA-resistant SE inoculated and not sweated, (NSES) buffered peptone water (BPW) inoculated and sweated, and (NSENS) BPW inoculated and not sweated. Eggs were inoculated with 108 SE. Eggs formed condensation for approximately 17 min in a 32°C incubator. Shell rinse, shell emulsion, and egg contents were sampled then enumerated and assessed for prevalence of SE over a 6 wk storage period at 4°C. After wk 1, the SENS shell rinse had higher SE counts (0.32 log10 CFU/mL) than the other 3 treatments, where no SE was enumerated. A significant week by treatment interaction was found for the shell rinse SE detection (P < 0.05). In subsequent weeks, no SE counts were obtained from the egg shell rinse, shell emulsion, or egg contents. The SENS shell rinses had significantly higher SE prevalence than the SES rinses in weeks 1 (100% vs. 34.3%), 2 (57.6% vs. 22.2%), and 3 (38.2% vs. 11.1%) (P < 0.05). In samples from weeks 4, 5, and 6, there was no difference in SE prevalence between SES and SENS. Egg sweating did not increase SE penetration into the shell emulsion across treatment or week (P < 0.05). The decreasing trend of SE prevalence obtained over the study period indicate that refrigeration is effective at inhibiting SE growth. These results indicate that egg sweating occurring under common US egg handling practices is not harmful to egg safety. © 2017 Poultry Science Association Inc.
Conway, David I.; Robertson, Chris; Gray, Heather; Young, Linda; McDaid, Lisa M.; Winter, Andrew J.; Campbell, Christine; Pan, Jiafeng; Kavanagh, Kimberley; Kean, Sharon; Bhatia, Ramya; Cubie, Heather; Clarkson, Jan E.; Bagg, Jeremy; Pollock, Kevin G.; Cuschieri, Kate
2016-01-01
The purpose of this study was to test the feasibility of undertaking a full population investigation into the prevalence, incidence, and persistence of oral Human Papilloma Virus (HPV) in Scotland via dental settings. Male and female patients aged 16–69 years were recruited by Research Nurses in 3 primary care and dental outreach teaching centres and 2 General Dental Practices (GDPs), and by Dental Care Teams in 2 further GDPs. Participants completed a questionnaire (via an online tablet computer or paper) with socioeconomic, lifestyle, and sexual history items; and were followed up at 6-months for further questionnaire through appointment or post/online. Saline oral gargle/rinse samples, collected at baseline and follow-up, were subject to molecular HPV genotyping centrally. 1213 dental patients were approached and 402 individuals consented (participation rate 33.1%). 390 completed the baseline questionnaire and 380 provided a baseline oral specimen. Follow-up rate was 61.6% at 6 months. While recruitment was no different in Research Nurse vs Dental Care Team models the Nurse model ensured more rapid recruitment. There were relatively few missing responses in the questionnaire and high levels of disclosure of risk behaviours (99% answered some of the sexual history questions). Data linkage of participant data to routine health records including HPV vaccination data was successful with 99.1% matching. Oral rinse/gargle sample collection and subsequent HPV testing was feasible. Preliminary analyses found over 95% of samples to be valid for molecular HPV detection prevalence of oral HPV infection of 5.5% (95%CI 3.7, 8.3). It is feasible to recruit and follow-up dental patients largely representative / reflective of the wider population, suggesting it would be possible to undertake a study to investigate the prevalence, incidence, and determinants of oral HPV infection in dental settings. PMID:27861508
Conway, David I; Robertson, Chris; Gray, Heather; Young, Linda; McDaid, Lisa M; Winter, Andrew J; Campbell, Christine; Pan, Jiafeng; Kavanagh, Kimberley; Kean, Sharon; Bhatia, Ramya; Cubie, Heather; Clarkson, Jan E; Bagg, Jeremy; Pollock, Kevin G; Cuschieri, Kate
2016-01-01
The purpose of this study was to test the feasibility of undertaking a full population investigation into the prevalence, incidence, and persistence of oral Human Papilloma Virus (HPV) in Scotland via dental settings. Male and female patients aged 16-69 years were recruited by Research Nurses in 3 primary care and dental outreach teaching centres and 2 General Dental Practices (GDPs), and by Dental Care Teams in 2 further GDPs. Participants completed a questionnaire (via an online tablet computer or paper) with socioeconomic, lifestyle, and sexual history items; and were followed up at 6-months for further questionnaire through appointment or post/online. Saline oral gargle/rinse samples, collected at baseline and follow-up, were subject to molecular HPV genotyping centrally. 1213 dental patients were approached and 402 individuals consented (participation rate 33.1%). 390 completed the baseline questionnaire and 380 provided a baseline oral specimen. Follow-up rate was 61.6% at 6 months. While recruitment was no different in Research Nurse vs Dental Care Team models the Nurse model ensured more rapid recruitment. There were relatively few missing responses in the questionnaire and high levels of disclosure of risk behaviours (99% answered some of the sexual history questions). Data linkage of participant data to routine health records including HPV vaccination data was successful with 99.1% matching. Oral rinse/gargle sample collection and subsequent HPV testing was feasible. Preliminary analyses found over 95% of samples to be valid for molecular HPV detection prevalence of oral HPV infection of 5.5% (95%CI 3.7, 8.3). It is feasible to recruit and follow-up dental patients largely representative / reflective of the wider population, suggesting it would be possible to undertake a study to investigate the prevalence, incidence, and determinants of oral HPV infection in dental settings.
Kušar, Darja; Šrimpf, Karin; Isaković, Petra; Kalšek, Lina; Hosseini, Javid; Zdovc, Irena; Kotnik, Tina; Vengušt, Modest; Tavčar-Kalcher, Gabrijela
2016-10-18
Bacterial intercellular communication, called quorum sensing, takes place via the production and collective response to signal molecules. In Gram-negative bacteria, like Pseudomonas aeruginosa, these signaling molecules are N-acylhomoserine lactones (AHLs). P. aeruginosa is a common cause of inflammation of the ear canal (otitis externa) in dogs. It employs quorum sensing to coordinate the expression of host tissue-damaging factors, which are largely responsible for its virulence. The treatment of P. aeruginosa-associated otitis is challenging due to a high intrinsic resistance of P. aeruginosa to several antibiotics. Attenuation of quorum sensing signals to inhibit bacterial virulence is a novel strategy for the treatment of resistant bacterial pathogens, including P. aeruginosa. Therefore, it is important to recognize and define quorum sensing signal molecules in clinical samples. To date, there are no reports on determination of AHLs in the veterinary clinical samples. The purpose of this study was to validate an analytical procedure for determination of the concentration of AHLs in the ear rinses from dogs with P. aeruginosa-associated otitis externa. Samples were obtained with rinsing the ear canals with physiological saline solution. For validation, samples from healthy dogs were spiked with none or different known amounts of the selected AHLs. With the validated procedure, AHLs were analyzed in the samples taken in weekly intervals from two dogs, receiving a standard treatment for P. aeruginosa-associated otitis externa. Validation proved that the procedure enables quantification of AHLs in non-clinical and clinical samples. In addition, a time dependent reduction of AHL concentration was detected for the treated dogs. Our results indicate that liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) is superior in detecting AHLs compared to other chromatographic techniques. This is the first report on determination of AHLs in the clinical samples of veterinary importance. The analytical procedure described in this paper is capable of supporting novel antimicrobial strategies, which target quorum sensing.
Directed flow fluid rinse trough
Kempka, Steven N.; Walters, Robert N.
1996-01-01
Novel rinse troughs accomplish thorough uniform rinsing. The tanks are suitable for one or more essentially planar items having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs also require less rinse fluid to accomplish a thorough rinse than prior art troughs.
Spahr, N.E.; Boulger, R.W.
1997-01-01
Quality-control samples provide part of the information needed to estimate the bias and variability that result from sample collection, processing, and analysis. Quality-control samples of surface water collected for the Upper Colorado River National Water-Quality Assessment study unit for water years 1995?96 are presented and analyzed in this report. The types of quality-control samples collected include pre-processing split replicates, concurrent replicates, sequential replicates, post-processing split replicates, and field blanks. Analysis of the pre-processing split replicates, concurrent replicates, sequential replicates, and post-processing split replicates is based on differences between analytical results of the environmental samples and analytical results of the quality-control samples. Results of these comparisons indicate that variability introduced by sample collection, processing, and handling is low and will not affect interpretation of the environmental data. The differences for most water-quality constituents is on the order of plus or minus 1 or 2 lowest rounding units. A lowest rounding unit is equivalent to the magnitude of the least significant figure reported for analytical results. The use of lowest rounding units avoids some of the difficulty in comparing differences between pairs of samples when concentrations span orders of magnitude and provides a measure of the practical significance of the effect of variability. Analysis of field-blank quality-control samples indicates that with the exception of chloride and silica, no systematic contamination of samples is apparent. Chloride contamination probably was the result of incomplete rinsing of the dilute cleaning solution from the outlet ports of the decaport sample splitter. Silica contamination seems to have been introduced by the blank water. Sampling and processing procedures for water year 1997 have been modified as a result of these analyses.
Rinse trough with improved flow
O'Hern, Timothy J.; Grasser, Thomas W.
1998-01-01
Novel rinse troughs accomplish thorough uniform rinsing. The troughs are suitable for one or more essentially planar objects having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs provide uniform rinse fluid flow over the objects' surfaces to accomplish a more thorough rinse than prior art troughs.
Directed flow fluid rinse trough
Kempka, S.N.; Walters, R.N.
1996-07-02
Novel rinse troughs accomplish thorough uniform rinsing. The tanks are suitable for one or more essentially planar items having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs also require less rinse fluid to accomplish a thorough rinse than prior art troughs. 9 figs.
De Jesus Tavarez, Rudys R; Rodrigues, Lorrany Lc; Diniz, Ana C; Lage, Lucas M; Torres, Carlos Rg; Bandeca, Matheus C; Firoozmand, Leily M
2018-03-01
This study aims to evaluate the effect of erbium: Yttrium-aluminum-garnet (Er:YAG) laser irradiation on the enamel microshear bond strength (μSBS), followed by the utilization of etch-and-rinse and universal adhesive systems. A total of 32 molars were sectioned in the mesiodistal direction producing 64 samples that were randomized into two groups (n = 32): single bond 2 (SB2) (etch-and-rinse system; 3M), SB universal (SBU) (universal etching system; The SB2 and SBU groups were then divided into two subgroups (n = 16): (i) enamel was irradiated with an Er:YAG laser (λ = 2.94 μm, 60 mJ, 10 Hz), and (ii) enamel served as a control. The samples were restored with TPH3 (Dentsply), stored in artificial saliva for 24 hours, and subjected to a micro-shear test. Kruskal-Wallis (p < 0.05) and Mann-Whitney U tests indicated no significant differences in uSBS between the groups, and the fractures were predominately at the resin-enamel interface. The previous irradiation of enamel with Er:YAG laser does not interfere with the performance of simplified two-step etch-and-rinse and universal adhesive systems. The increasing use of Er:YAG laser is important to evaluate the influence of this irradiation on the adhesion of restorative materials. Thus, to obtain the longevity of the restorative procedures, it is necessary to know the result of the association of the present adhesive systems to the irradiated substrate.
Rinse trough with improved flow
O`Hern, T.J.; Grasser, T.W.
1998-08-11
Novel rinse troughs accomplish thorough uniform rinsing. The troughs are suitable for one or more essentially planar objects having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs provide uniform rinse fluid flow over the objects` surfaces to accomplish a more thorough rinse than prior art troughs. 5 figs.
Gallandat, Karin; Daniels, Kyle; Desmarais, Anne Marie; Scheinman, Pamela; Lantagne, Daniele
2017-01-01
To prevent Ebola transmission, frequent handwashing is recommended in Ebola Treatment Units and communities. However, little is known about which handwashing protocol is most efficacious. We evaluated six handwashing protocols (soap and water, alcohol-based hand sanitizer (ABHS), and 0.05% sodium dichloroisocyanurate, high-test hypochlorite, and stabilized and non-stabilized sodium hypochlorite solutions) for 1) efficacy of handwashing on the removal and inactivation of non-pathogenic model organisms and, 2) persistence of organisms in rinse water. Model organisms E. coli and bacteriophage Phi6 were used to evaluate handwashing with and without organic load added to simulate bodily fluids. Hands were inoculated with test organisms, washed, and rinsed using a glove juice method to retrieve remaining organisms. Impact was estimated by comparing the log reduction in organisms after handwashing to the log reduction without handwashing. Rinse water was collected to test for persistence of organisms. Handwashing resulted in a 1.94–3.01 log reduction in E. coli concentration without, and 2.18–3.34 with, soil load; and a 2.44–3.06 log reduction in Phi6 without, and 2.71–3.69 with, soil load. HTH performed most consistently well, with significantly greater log reductions than other handwashing protocols in three models. However, the magnitude of handwashing efficacy differences was small, suggesting protocols are similarly efficacious. Rinse water demonstrated a 0.28–4.77 log reduction in remaining E. coli without, and 0.21–4.49 with, soil load and a 1.26–2.02 log reduction in Phi6 without, and 1.30–2.20 with, soil load. Chlorine resulted in significantly less persistence of E. coli in both conditions and Phi6 without soil load in rinse water (p<0.001). Thus, chlorine-based methods may offer a benefit of reducing persistence in rinse water. We recommend responders use the most practical handwashing method to ensure hand hygiene in Ebola contexts, considering the potential benefit of chlorine-based methods in rinse water persistence. PMID:28231311
Dogan, Alev Aksoy; Adiloglu, Ali K; Onal, Suleyman; Cetin, Emel Sesli; Polat, Esra; Uskun, Ersin; Koksal, Fatih
2008-11-01
To evaluate the efficacy of common antiseptic mouth rinses and octenidine dihydrochloride (OCT). The antibacterial activities of antiseptics against total and cariogenic bacteria (Streptococcus mutans and Lactobacillus species) in saliva were studied in vitro and in vivo. After unstimulated saliva was collected, one of the mouth rinse solutions was applied for 30seconds. Saliva samples were collected 15, 30, 60, and 120min later and evaluated for their bacterial count. OCT had a significantly greater inhibitory effect on the studied bacteria than 0.2% chlorhexidine gluconate (CHX) and 7.5% polyvinylpyrrolidone-iodine complex (PVP-I) from 15min to 120min following the application (p<0.01). The antiseptic efficacy of 0.2% CHX on total bacteria and Lactobacillus species was very similar to the efficacy observed with 7.5% PVP-I mouth solution from 15min up to 120min. Streptococcus mutans was completely inhibited by 0.15mg/ml PVP-I, 0.5mg/ml CHX, and 0.1mg/ml OCT concentrations, while Streptococcus salivarius was inhibited by 0.15mg/ml PVP-I, 2mg/ml CHX, and 0.8mg/ml OCT concentrations. Lactococcus lactis subspecies lactis was inhibited with 0.00313mg/ml OCT, 30mg/ml PVP-I, and 0.0063mg/ml CHX concentrations. OCT compared favorably with CHX and PVP-I in its antibacterial effects, both in vitro and in vivo (p<0.01).
Efficacy of detergents in removing Salmonella and Shigella spp. from the surface of fresh produce.
Raiden, Renee M; Sumner, Susan S; Eifert, Joseph D; Pierson, Merle D
2003-12-01
Fresh produce has been implicated in several foodborne disease outbreaks. Produce surfaces can be primary sites of contamination during production and handling. One approach to reduce contamination is to treat fresh produce with rinsing agents. In this study, different detergent agents were used at 22 and 40 degrees C to determine their efficacy in removing Salmonella and Shigella spp. from the surfaces of strawberries, tomatoes, and green-leaf lettuce. Produce was inoculated at 22 degrees C with a cocktail of nalidixic acid-resistant organisms (6 to 6.5 log CFU/ml). After air drying for 1 h, samples were rinsed with either 0.1% Tween 80, 0.1% sodium lauryl sulfate (SLS), or water (control) at 22 or 40 degrees C. Rinse solutions were spiral plated onto tryptic soy agar supplemented with 50 mg of nalidixic acid per liter. In trials involving strawberries and lettuce, Salmonella and Shigella were removed at levels of 4 and 3 log CFU/ml, respectively, except from Salmonella-inoculated strawberries rinsed with SLS, for which minimal removal rates were 1.5 log CFU/ml at 22 degrees C and < 1 log CFU/ml at 40 degrees C. When whole strawberries were analyzed after rinsing with SLS, few organisms were recovered. This result suggests that SLS may have a lethal or sublethal effect on Salmonella, especially when a 40 degrees C solution is used. Salmonella and Shigella removal rates for tomatoes were 1 and 1.5 log CFU/ml lower, respectively, than those for strawberries or lettuce. Overall, detergents were no more effective in removing organisms from produce than water was. The detergents examined would not constitute effective overall produce rinse treatments.
Van Leeuwen, M P C; Rosema, N A M; Versteeg, P A; Slot, D E; Van Winkelhoff, A J; Van der Weijden, G A
2015-05-01
To evaluate the effectiveness of 0.07% cetylpyridinium chloride (CPC) mouth rinse for reduction of gingival inflammation and inhibition of plaque compared to a vehicle control (VC) mouth rinse over a 6-month period. Participants (n = 62) used their randomly assigned product as adjunct to toothbrushing. Bleeding, plaque and staining scores were assessed at baseline, 3 and 6 months. Plaque and saliva samples were taken at each assessment monitoring possible shifts in the composition of the microbiota. A significant difference (P = 0.002) in favour of the CPC mouth rinse, with respect to plaque scores, was found. Bleeding scores at 6 months were not significantly different (P = 0.089). However, when correcting for baseline values, a tendency towards a significant difference in bleeding scores at end trail was observed in favour of the CPC mouth rinse (P = 0.061). Regarding staining at 3 and 6 months, a small but significant difference (8.6% and 10.4%, respectively) (P < 0.0001) was observed with lower scores for the VC group. There was a significant reduction in total anaerobic count in the CPC group at 6 months (P < 0.05). The ratio of aerobes/anaerobes was markedly increased at 3 months, especially in the CPC group. No further differences were observed between groups at 6 months. The use of 0.07% CPC mouth rinse was significantly more effective in reducing plaque scores than the vehicle control. Bleeding scores were not different at 6 months. The test product was well accepted and did not cause any serious clinical side effects or negatively affected the microbiota. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Jackson, D.D.; Hollen, R.M.
1981-02-27
A method of very thoroughly and quikcly cleaning a guaze electrode used in chemical analyses is given, as well as an automobile cleaning apparatus which makes use of the method. The method generates very little waste solution, and this is very important in analyzing radioactive materials, especially in aqueous solutions. The cleaning apparatus can be used in a larger, fully automated controlled potential coulometric apparatus. About 99.98% of a 5 mg plutonium sample was removed in less than 3 minutes, using only about 60 ml of rinse solution and two main rinse steps.
Extraction of diatoms from (cotton) clothing for forensic comparisons.
Uitdehaag, Stefan; Dragutinovic, Aleksandar; Kuiper, Irene
2010-07-15
Diatoms in clothing can be used to determine contact with surface water and contact with a specific water source, which can help link suspects to crime scenes. However, for the study of diatoms it is imperative that they are first extracted from the clothing under investigation. In this study we tested three methods for extracting diatoms from cotton clothing: rinsing with water (RW), rinsing with ethanol (RE) and the dissolution of cotton with nitric and sulphuric acid (DI). The DI method produced the highest average yield and can be used to determine contact with water. The RE method extracted reproducible numbers of diatoms from two different T-shirts and the resulting species compositions were similar to their relevant reference water samples. Therefore, we present rinsing with ethanol as an effective extraction method for the qualitative and quantitative analysis of diatoms in (cotton) clothing. (c) 2010 Elsevier Ireland Ltd. All rights reserved.
Palit, Madhuchanda; Hegde, Sundeep K; Bhat, Sham S
2016-01-01
The aim of the present study was to evaluate the anticar-iogenic efficacy of hot and cold aqueous extracts of Terminalia chebula against Streptococcus mutans as an oral rinse and also to discover the acceptability of the mouthwash in children. Sixty children between 8 and 12 years with high caries risk were selected. 10% concentration of hot and cold aqueous extracts were prepared. Children were randomly divided into extract and control group. Baseline salivary samples were taken, and the samples were re-collected at 10, 60, and 90 minutes interval after rinsing. Microbial and pH analysis were done. An acceptability questionnaire was filled. Tukey's multiple comparison test. The results show statistically significant difference in S. mutans counts at 10, 60, and 90 minutes interval when compared with negative control. However, when the hot and cold extracts were compared, there was no significant difference. Acceptability questionnaire showed 65 to 75% overall acceptability for both types of extract. Results of this study showed that both types of aqueous extract of T. chebula may be used as potential anticariogenic mouthwash with acceptable taste in children. Palit MC, Hegde SK, Bhat SS. Effectiveness of Mouthrinse formulated from Aqueous Extract of Terminalia chebula on Salivary Streptococcus mutans Count and pH among 8- to 12-year-old School Children of Karnataka: A Randomized Clinical Trial. Int J Clin Pediatr Dent 2016;9(4):349-354.
In Vitro Ability of a Novel Nanohydroxyapatite Oral Rinse to Occlude Dentine Tubules
Hill, Robert G.; Chen, Xiaohui; Gillam, David G.
2015-01-01
Objectives. The aim of the study was to investigate the ability of a novel nanohydroxyapatite (nHA) desensitizing oral rinse to occlude dentine tubules compared to selected commercially available desensitizing oral rinses. Methods. 25 caries-free extracted molars were sectioned into 1 mm thick dentine discs. The dentine discs (n = 25) were etched with 6% citric acid for 2 minutes and rinsed with distilled water, prior to a 30-second application of test and control oral rinses. Evaluation was by (1) Scanning Electron Microscopy (SEM) of the dentine surface and (2) fluid flow measurements through a dentine disc. Results. Most of the oral rinses failed to adequately cover the dentine surface apart from the nHa oral rinse. However the hydroxyapatite, 1.4% potassium oxalate, and arginine/PVM/MA copolymer oral rinses, appeared to be relatively more effective than the nHA test and negative control rinses (potassium nitrate) in relation to a reduction in fluid flow measurements. Conclusions. Although the novel nHA oral rinse demonstrated the ability to occlude the dentine tubules and reduce the fluid flow measurements, some of the other oral rinses appeared to demonstrate a statistically significant reduction in fluid flow through the dentine disc, in particular the arginine/PVM/MA copolymer oral rinse. PMID:26161093
NASA Astrophysics Data System (ADS)
Yeh, Wei-Ming; Lawson, Richard A.; Tolbert, Laren M.; Henderson, Clifford L.
2012-03-01
As the semiconductor industry continues to push to smaller critical dimensions, pattern collapse during lithographic processing caused by unbalanced capillary forces during the final rinse and drying process has become an important problem that can limit the practical resolution of a resist material to feature sizes larger than its intrinsic resolution limit. One of the primary modes of pattern collapse is via elastoplastic pattern deformation which is strongly related to the mechanical properties of the resist. One approach to mitigating such collapse problems is to enhance the mechanical properties of the resist features. Since such modification of resist physical properties for pattern collapse purposes is difficult to achieve through modified formulation of the resist itself (i.e. due to the complex set of requirements that a resist must satisfy and the complex set of physical and chemical phenomena that underlie the imaging processing itself), we have pursued an alternative strategy for improving the resist mechanical properties after features are developed in the film but before they are rinsed and dried. The family of techniques being developed in this work function through the use of aqueous compatible reactive rinse solutions that can be applied to developed resist features while they are wet during normal rinse processing on a track system. By applying these techniques during the rinse process, the resist features can be strengthened before they are subjected to significant capillary forces during the final drying step. In this work, the use of diamine compounds to reactively crosslink the surface of resists containing carboxylic acid groups through formation of amide bonds using carbodiimide chemistry has been explored. One advantage of this approach is that it is an aqueous process that should be easily compatible with high volume, track-based lithographic processes. Contact angle studies and x-ray photoelectron spectroscopy (XPS) were used to characterize the surface crosslinking reaction using such diamine surface rinse treatments. Pattern collapse test structures were fabricated and analyzed to measure the amount of mechanical property improvement imparted by such treatments. Application of such amine reactive rinses was found to clearly result in an improvement in the resistance of resists to pattern collapse as observed by SEM. A comparison of the critical stress at the point of pattern collapse as a function of resist feature size also clearly shows a significant improvement in mechanical resilience of resist samples processed with the reactive rinse treatment.
Giamalva, J N; Redfern, M; Bailey, W C
1998-08-01
To survey dietitians in health care facilities about the acceptability of alternative meat and poultry processing methods designed to reduce the risk of foodborne disease and their willingness to pay for these processes. A geographically representative sample of 600 members of The American Dietetic Association who work in health care facilities. The response rate was 250 completed questionnaires from 592 eligible subjects (42%). A mail survey was used to gather information on the acceptability of a Hazard Analysis and Critical Control Point (HACCP) system, chemical rinses, and irradiation for increasing the safety of food. Discrete choice contingent valuation was used to determine the acceptability at current prices and at 5, 10, and 25 cents per pound above current prices. Logistic regression was used to estimate mean willingness to pay (the maximum amount respondents are willing to pay) for each process. A simultaneous equations regression model was used to estimate the effects of other variables on acceptability. Respondents expressed a high level of concern for food safety in health care facilities. The estimated mean willingness to pay was highest for a HACCP system and lowest for chemical rinses. The successful adoption of alternative methods to increase food safety depends on their acceptance by foodservice professionals. The professionals sampled were most accepting of a HACCP system, somewhat less accepting of irradiation, and least accepting of new chemical rinses. Poultry and beef processors and government agencies concerned with food safety may want to take into account the attitudes of foodservice professionals.
Shin, Eun-Seop; Chung, Sung-Chang; Kim, Young-Ku; Lee, Sung-Woo; Kho, Hong-Seop
2003-07-01
The aim of the study was to investigate the relationship between oral Candida carriage and the secretor status of blood group antigens. Unstimulated whole saliva and oral rinse samples were obtained from 180 healthy subjects. These samples were plated on Sabouraud's dextrose agar media to determine oral Candida carriage. Sodium dodecylsulfate polyacrylamide gel electrophoresis and immunoblotting were performed on whole saliva samples to determine the secretor status of blood group antigens. The oral Candida carriage rate was found to be 45.0%. The sensitivity of the concentrated rinse culture proved to be superior. Oral Candida carriage was not significantly related to the blood group or secretor status of ABH or Lewis antigens. No significant relationship was found between oral Candida carriage and salivary flow rate. However, smoking affected oral Candida carriage. Oral Candida carriage in healthy individuals is not significantly related to blood group or secretor status.
Berrang, M E; Windham, W R; Meinersmann, R J
2011-04-01
The objective of this study was to determine the individual and combined effects of a high pH scald and a postpick chlorine dip on bacteria present on broiler carcasses. In each of 3 replications, a flock was sampled at several sites within a commercial broiler processing plant. Carcasses were sampled by whole carcass rinse before and after treated scalding at mean pH 9.89 or control scalding at mean pH 6.88. Other carcasses from the same flock run on both the treated and control scald lines were collected and sampled before and after a chlorine dip tank operated at mean total chlorine level of 83.3 mg/kg and pH 6.04. Rinses were cultured for numbers of Campylobacter and Escherichia coli and presence or absence of Salmonella. High pH scald was more effective than standard scald to lessen the prevalence and numbers of Campylobacter on broiler carcasses; a lower prevalence was maintained through the postpick chlorine dip tank. The pH of the scald tank made no difference in numbers of E. coli recovered from broiler carcasses at any tested point on the processing line. High pH scald was not more effective than standard scald to lessen Salmonella prevalence. Furthermore, it is unclear why the postpick chlorine dip effectively lessened Salmonella prevalence on only the control scald line. Although no evidence exists that these treatments have an additive effect when used in series, each treatment shows some promise individually. Further optimization may result in more effective decontamination of broiler carcasses.
Dazza, Marie; Schwarz, Lilian; Coget, Julien; Frebourg, Noelle; Wood, Gregory; Huet, Emmanuel; Bridoux, Valérie; Veber, Benoit; Tuech, Jean-Jacques
2016-12-01
Cytoreductive surgery (CRS) with hyperthermic intraperitoneal chemotherapy (HIPEC) is an emerging curative treatment option for patients with peritoneal carcinomatosis. It has a long-term survival benefit but is associated with high rates of morbidity, ranging from 12 % to 65 %, mainly due to infectious complications. We sought to evaluate the clinical relevance of routine intraoperative bacteriological sampling following CRS/HIPEC. Between November 2010 and December 2014, every patients receiving CRS/HIPEC were included. Three samples were routinely collected from standardized locations for intraperitoneal rinsing liquid bacteriological analysis (RLBA) after completion of HIPEC. The clinical and surgical features, bacteriological results, and short-term outcomes were retrospectively reviewed. The overall mortality and morbidity rates were 5 and 45 %, respectively. Among the 75 included patients, 40 % (n = 30) had at least one positive bacterial culture. Risk factors for a positive culture were colorectal resection (adjusted hazard ratio [HR] = 3.072, 95 % CI 1.843-8.004; p = 0.009) and blood loss >1000 mL (HR = 4.272, 95 % CI 1.080-18.141; p = 0.031). Among 26 (35 %) patients with abdominal infectious complications, 13 (17 %) experienced isolated complications. A positive RLBA result was independently associated with abdominal infectious complications (HR = 5.108, 95 % CI 1.220-16.336; p = 0.024) and isolated abdominal infectious complications (HR = 4.199, 95 % CI 1.064-15.961; p = 0.04). Forty percent of the RLBA samples obtained following CRS/HIPEC tested positive for bacteria. Bacterial sampling of rinsing liquid should be systematically performed. An aggressive and immediate antibiotic strategy needs to be evaluated.
Sampling naturally contaminated broiler carcasses for Salmonella by three different methods
USDA-ARS?s Scientific Manuscript database
Postchill neck skin (NS) maceration and whole carcass rinsing (WCR) are frequently used methods to detect salmonellae from commercially processed broilers. These are practical, nondestructive methods, but they are insensitive and may result in frequent false negatives (20 to 40%). NS samples only ...
Paolin, Adolfo; Trojan, Diletta; Carniato, Antonio; Tasca, Fabio; Massarin, Ervino; Tugnoli, Alessandro; Cogliati, Elisa
2016-12-01
Bacterial contamination of tissues retrieved from cadaveric donors is a common feature worldwide, and every tissue bank, albeit using different methods, conducts decontamination to guarantee safe tissues suitable for clinical use. The effectiveness of the methods used to eradicate pathogens differs. In order to reduce the tissue bioburden at retrieval, we have introduced a new method involving rinsing tissues in a sodium hypochlorite solution. To test its effectiveness we analyzed two comparable groups of tissues: Group A: 1881 tissues, all rinsed with isotonic saline solution after retrieval, and Group B: 1968 tissues immersed in an isotonic saline solution containing sodium hypochlorite (final concentration 0.1 %) for different lengths of time and subsequently rinsed with isotonic saline. The rinsing solution of each tissue was then sampled for microbiological cultures in both groups. The resultant overall contamination rate was 40.5 % for Group A and 6.7 % for Group B, with an 82.8 % difference in the reduction of contamination between the two groups. This was especially the case for commensal skin bacteria in musculoskeletal tissue, which accounted for over half the overall contamination. Our data highlighted that decontamination with sodium hypochlorite was helpful in reducing the bacterial bioburden in tissues retrieved from cadaveric donors.
Hammack, Thomas S; Johnson, Mildred L; Jacobson, Andrew P; Andrews, Wallace H
2006-01-01
Studies were conducted to determine the relative effectiveness of buffered peptone water (BPW), lactose (LAC) broth, and Universal Preenrichment (UP) broth for the recovery of Salmonella organisms from fruit rinses, whole fruit, and comminuted fruit. In the first phase, the relative effectiveness of the rinse and soak methods for the recovery of Salmonella from surface-contaminated mangoes and tomatoes was examined. Fruits were spot inoculated with single Salmonella serovars and held for 4 days at 2-6 degrees C before analysis was initiated. The contaminated fruit was rinsed in portions of BPW, LAC broth, or UP broth. Portions from each rinse were added to its respective broth (e.g., BPW to BPW). Individual whole fruit, in their remaining broth rinses (soak method), and the fruit rinse/broths (rinse method) were incubated for 24 h at 35 degrees C. The Bacteriological Analytical Manual (BAM) Salmonella culture method was followed thereafter. The soak method produced significantly greater numbers (P < 0.05) of positive test portions than did the rinse method for the analysis of mangoes (93 versus 12) and tomatoes (85 versus 34). The 3 broths were comparable for the recovery of Salmonella for both the soak and the rinse methods for mangoes. For tomatoes, there were no significant differences among the broths for the soak method, but BPW and UP broth were significantly more productive (P < 0.05) than LAC broth by the rinse method. In the second phase, the relative effectiveness of LAC broth, BPW, and UP broth for the recovery of Salmonella from comminuted fruit was examined. Fruits were contaminated with single Salmonella serovars and aged for 4 days at 2-6 degrees C. Twenty 25 g test portions were preenriched in each of the following broths: BPW, LAC broth, and UP broth. The BAM Salmonella culture method was followed thereafter. For cantaloupes, significantly more (P < 0.05) Salmonella-positive test portions were recovered with UP broth (96 Salmonella-positive test portions) and BPW (87 Salmonella-positive test portions) than with LAC broth (57 Salmonella-positive test portions). For mangoes, BPW recovered an arithmetically larger number of Salmonella-positive test portions (27 Salmonella-positive test portions) than did either LAC broth (14 Salmonella-positive test portions) or UP broth (18 Salmonella-positive test portions). For tomatoes, there were no significant differences among the broths: BPW recovered 65 Salmonella-positive test portions, UP broth recovered 62 Salmonella-positive test portions, and LAC broth recovered 60 Salmonella-positive test portions. For the analysis of whole fruit, it is recommended that the soak method be used. For whole fruit analyzed with the soak method, UP broth should be used for tomatoes and BPW should be used for mangoes. It is further recommended that UP broth be used for the analysis of comminuted cantaloupes and that BPW be used for the analysis of comminuted mangoes and tomatoes.
Effect of safflower oil on the protective properties of the in situ formed salivary pellicle.
Hannig, C; Wagenschwanz, C; Pötschke, S; Kümmerer, K; Kensche, A; Hoth-Hannig, W; Hannig, M
2012-01-01
The prevalence of dental erosion is still increasing. A possible preventive approach might be rinsing with edible oils to improve the protective properties of the pellicle layer. This was tested in the present in situ study using safflower oil. Pellicle formation was carried out in situ on bovine enamel slabs fixed buccally to individual upper jaw splints (6 subjects). After 1 min of pellicle formation subjects rinsed with safflower oil for 10 min, subsequently the samples were exposed in the oral cavity for another 19 min. Enamel slabs without oral exposure and slabs exposed to the oral cavity for 30 min without any rinse served as controls. After pellicle formation in situ, slabs were incubated in HCl (pH 2; 2.3; 3) for 120 s, and kinetics of calcium and phosphate release were measured photometrically (arsenazo III, malachite green). Furthermore, the ultrastructure of the pellicles was evaluated by transmission electron microscopy (TEM). Pellicle alone reduced erosive calcium and phosphate release significantly at all pH values. Pellicle modification by safflower oil resulted in an enhanced calcium loss at all pH values and caused an enhanced phosphate loss at pH 2.3. TEM indicated scattered accumulation of lipid micelles and irregular vesicle-like structures attached to the oil-treated pellicle layer. Acid etching affected the ultrastructure of the pellicle irrespective of oil rinsing. The protective properties of the pellicle layer against extensive erosive attacks are limited and mainly determined by pH. The protective effects are modified and reduced by rinses with safflower oil. Copyright © 2012 S. Karger AG, Basel.
Assunção, Cristiane Meira; Goulart, Marcelo; Essvein, Tattiana Enrich; dos Santos, Nicole Marchioro; Erhardt, Maria Carolina Guilherme; Lussi, Adrian; Rodrigues, Jonas de Almeida
2018-01-01
ABSTRACT Objective To evaluate the effect of erosive challenges on the tooth- restoration interface of deciduous teeth treated with different adhesive protocols. Material and Methods Deciduous molars were cut mesiodistally, then embedded, abraded and polished (n=80). Samples were randomly divided according to the adhesive system used into: G1 (Adper Single Bond2®, etch-and-rinse), G2 (Universal Single Bond®, self-etching), G3 (OptibondFL®, etch-and-rinse with Fluoride) and G4 (BondForce®, self-etching with Fluoride). After standardized cavity preparation (2 mm diameter x 2 mm depth), adhesive systems were applied and samples were restored (composite resin Z350®). Half of the samples were exposed to erosive/abrasive cycles (n = 10, each adhesive group), and the other half (control group; n = 10) remained immersed in artificial saliva. For microleakage analysis, samples were submersed in methylene blue and analyzed at 40x magnifications. Cross-sectional microhardness (CSMH) was carried out (50 g/5 s) at 25 μm, 50 μm, and 100 μm from the eroded surface and at 25 μm, 75 μm, and 125 μm from the enamel bond interface. Results Regarding microleakage, 7.5% of the samples showed no dye infiltration, 30% showed dye infiltration only at the enamel interface, and 62.5% showed dye infiltration through the dentin-enamel junction, with no difference between groups (p≥0.05). No significant difference was observed in CSMH at different depths (two-way ANOVA, p≥0.05). Conclusions We did not observe significant changes in microleakage or CSMH after erosive/abrasive challenges in deciduous teeth treated with different adhesive protocols (etch-and-rinse and self-etching adhesives, with and without fluoride). PMID:29364339
Assunção, Cristiane Meira; Goulart, Marcelo; Essvein, Tattiana Enrich; Santos, Nicole Marchioro Dos; Erhardt, Maria Carolina Guilherme; Lussi, Adrian; Rodrigues, Jonas de Almeida
2018-01-18
To evaluate the effect of erosive challenges on the tooth- restoration interface of deciduous teeth treated with different adhesive protocols. Deciduous molars were cut mesiodistally, then embedded, abraded and polished (n=80). Samples were randomly divided according to the adhesive system used into: G1 (Adper Single Bond2®, etch-and-rinse), G2 (Universal Single Bond®, self-etching), G3 (OptibondFL®, etch-and-rinse with Fluoride) and G4 (BondForce®, self-etching with Fluoride). After standardized cavity preparation (2 mm diameter x 2 mm depth), adhesive systems were applied and samples were restored (composite resin Z350®). Half of the samples were exposed to erosive/abrasive cycles (n = 10, each adhesive group), and the other half (control group; n = 10) remained immersed in artificial saliva. For microleakage analysis, samples were submersed in methylene blue and analyzed at 40x magnifications. Cross-sectional microhardness (CSMH) was carried out (50 g/5 s) at 25 μm, 50 μm, and 100 μm from the eroded surface and at 25 μm, 75 μm, and 125 μm from the enamel bond interface. Regarding microleakage, 7.5% of the samples showed no dye infiltration, 30% showed dye infiltration only at the enamel interface, and 62.5% showed dye infiltration through the dentin-enamel junction, with no difference between groups (p≥0.05). No significant difference was observed in CSMH at different depths (two-way ANOVA, p≥0.05). We did not observe significant changes in microleakage or CSMH after erosive/abrasive challenges in deciduous teeth treated with different adhesive protocols (etch-and-rinse and self-etching adhesives, with and without fluoride).
Bandamwar, Kalika L; Garrett, Qian; Papas, Eric B
2012-04-01
To establish if sodium fluorescein (SFL) dye accumulation within intercellular spaces on the ocular surface contributes to the appearance of superficial punctate corneal staining. Thirteen subjects bilaterally wore PureVision™ lenses that had been pre-soaked in ReNu MultiPlus® multipurpose solution. After 1h of lens wear, corneal staining with SFL was assessed using a standard slit-lamp technique. Participants who presented with bilateral, corneal staining were selected for further evaluation. A randomly selected eye was rinsed with saline three times. Fellow eyes (control) received no rinsing. After each rinse, the appearance of SFL staining was recorded without any further instillation of the dye. To eliminate any confounding effects of staining due to residual fluorescein in the tear menisci, corneal staining was induced in freshly excised, isolated, rabbit eyes by topical administration of 0.001% PHMB and staining, rinsing and grading were performed as above. Nine out of 13 subjects presented with bilateral diffuse corneal staining (mean grade±SD: 2.4±0.7). The mean staining grades in test and control eyes respectively after each of the three rinses were (1) 2.41±0.41, 2.25±0.69 (p=0.9); (2) 2.34±0.79, 2.1±0.83 (p=0.8); and (3) 1.71±0.65, 1.60±0.79 (p=0.6) there was no significant reduction in staining with rinsing (p>0.05) and no difference was observed between test and control eyes at any sampling-point. Similar observations made in ex vivo rabbit eyes replicated these results. Pooling or accumulation of SFL solution within intercellular spaces does not appear to contribute to the appearance of superficial micropunctate corneal staining. Copyright © 2011 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.
Zorba, Yahya Orcun; Ilday, Nurcan Ozakar; Bayındır, Yusuf Ziya; Demirbuga, Sezer
2013-01-01
Objective: The aim of this study was to test the null hypothesis that different surface conditioning (etch and rinse and self-etch) and curing techniques (light cure/dual cure) had no effect on the shear bond strength of direct and indirect composite inlays. Materials and Methods: A total of 112 extracted human molar teeth were horizontally sectioned and randomly divided into two groups according to restoration technique (direct and indirect restorations). Each group was further subdivided into seven subgroups (n = 8) according to bonding agent (etch and rinse adhesives Scotchbond multi-purpose plus, All-Bond 3, Adper Single Bond and Prime Bond NT; and self-etch adhesives Clearfil Liner Bond, Futurabond DC and G bond). Indirect composites were cemented to dentin surfaces using dual-curing luting cement. Shear bond strength of specimens was tested using a Universal Testing Machine. Two samples from each subgroup were evaluated under Scanning electron microscopy to see the failing modes. Data was analyzed using independent sample t-tests and Tukey's tests. Results: Surface conditioning and curing of bonding agents were all found to have significant effects on shear bond strength (P < 0.05) of both direct and indirect composite inlays. With direct restoration, etch and rinse systems and dual-cured bonding agents yielded higher bond strengths than indirect restoration, self-etch systems and light-cured bonding agents. Conclusions: The results of the present study indicated that direct restoration to be a more reliable method than indirect restoration. Although etch and rinse bonding systems showed higher shear bond strength to dentin than self-etch systems, both systems can be safely used for the adhesion of direct as well as indirect restorations. PMID:24932118
Zorba, Yahya Orcun; Ilday, Nurcan Ozakar; Bayındır, Yusuf Ziya; Demirbuga, Sezer
2013-10-01
The aim of this study was to test the null hypothesis that different surface conditioning (etch and rinse and self-etch) and curing techniques (light cure/dual cure) had no effect on the shear bond strength of direct and indirect composite inlays. A total of 112 extracted human molar teeth were horizontally sectioned and randomly divided into two groups according to restoration technique (direct and indirect restorations). Each group was further subdivided into seven subgroups (n = 8) according to bonding agent (etch and rinse adhesives Scotchbond multi-purpose plus, All-Bond 3, Adper Single Bond and Prime Bond NT; and self-etch adhesives Clearfil Liner Bond, Futurabond DC and G bond). Indirect composites were cemented to dentin surfaces using dual-curing luting cement. Shear bond strength of specimens was tested using a Universal Testing Machine. Two samples from each subgroup were evaluated under Scanning electron microscopy to see the failing modes. Data was analyzed using independent sample t-tests and Tukey's tests. Surface conditioning and curing of bonding agents were all found to have significant effects on shear bond strength (P < 0.05) of both direct and indirect composite inlays. With direct restoration, etch and rinse systems and dual-cured bonding agents yielded higher bond strengths than indirect restoration, self-etch systems and light-cured bonding agents. The results of the present study indicated that direct restoration to be a more reliable method than indirect restoration. Although etch and rinse bonding systems showed higher shear bond strength to dentin than self-etch systems, both systems can be safely used for the adhesion of direct as well as indirect restorations.
Decontaminating materials used in ground water sampling devices: Organic contaminants
DOE Office of Scientific and Technical Information (OSTI.GOV)
Parker, L.V.; Ranney, T.A.
2000-12-31
In these studies, the efficiency of various decontamination protocols was tested on small pieces of materials commonly used in ground water sampling devices. Three materials, which ranged in ability to sorb organic solutes, were tested: stainless steel (SS), rigid polyvinyl chloride (PVC), and polytetrafluoroethylene (PTFE). The test pieces were exposed to two aqueous test solutions: One contained three volatile organic compounds (VOCs) and one nitroaromatic compound, and the other contained four pesticides. Also, three types of polymetic tubing were exposed to pesticide solutions. Generally, the contact times were 10 minutes and 24 hours for sorption and desorption. The contaminants weremore » removed from the nonpermeable SS and the less-sorptive rigid PVC test pieces simply by washing with a hot detergent solution and rinsing with hot water. Additional treatment was required for the PTFE test pieces exposed to the VOCs and for the low-density polyethylene (LDPE) tubing exposed to the pesticide test solution. Solvent rinsing did not improve removal of the three VOCs form the PTFE and only marginally improved removal of the residual pesticides from the LDPE. However, a hot water and detergent wash and rinse followed by oven drying at approximately 105 C was effective for removing the VOCs from the PTFE and substantially reduced pesticide contamination from the LDPE.« less
Chon, Jung-Whan; Kim, Hong-Seok; Kim, Dong-Hyeon; Kim, Hyunsook; Choi, In-Soo; Oh, Deog-Hwan; Seo, Kun-Ho
2014-07-01
The detection ability and selectivity of Karmali agar was improved by supplementation of an extended-spectrum β-lactamase inhibitor, potassium clavulanate. The optimum concentration of potassium clavulanate (0.5 μg/ml) in Karmali agar was determined by inoculation of 50 Campylobacter and 30 extended-spectrum β-lactamase-producing E. coli strains onto normal and modified Karmali agar containing various concentrations of the agent. Eighty retail carcasses were rinsed with 400 ml of buffered peptone water. The rinse samples were enriched in 2 × blood-free Bolton enrichment broth at 42°C for 48 h and then were streaked onto normal and modified Karmali agar containing 0.5 μg/ml potassium clavulanate. The suspicious colonies were subcultured on Columbia blood agar and confirmed by colony PCR. In chicken carcass samples, the modified Karmali agar showed a significantly greater isolation rate than normal Karmali agar (42.5 versus 21.3%; P < 0.05). Furthermore, the selectivity of the modified Karmali agar was also significantly higher (P < 0.05) than that of the normal Karmali agar, as seen by comparison of the number of contaminated agar plates (83.8 versus 97.5%) and the growth index (1.67 versus 2.91) of the non-Campylobacter colonies.
Examination of the steps leading up to the physical developer process for developing fingerprints.
Wilson, Jeffrey Daniel; Cantu, Antonio A; Antonopoulos, George; Surrency, Marc J
2007-03-01
This is a systematic study that examines several acid prewashes and water rinses on paper bearing latent prints before its treatment with a silver physical developer. Specimens or items processed with this method are usually pretreated with an acid wash to neutralize calcium carbonate from the paper before the treatment with a physical developer. Two different acids at varying concentrations were tested on fingerprints. Many different types of paper were examined in order to determine which acid prewash was the most beneficial. Various wash times as well as the addition of a water rinse step before the development were also examined. A pH study was included that monitored the acidity of the solution during the wash step. Scanning electron microscopy was used to verify surface calcium levels for the paper samples throughout the experiment. Malic acid at a concentration of 2.5% proved to be an ideal acid for most papers, providing good fingerprint development with minimal background development. Water rinses were deemed unnecessary before physical development.
Kato, K; Nakagaki, H; Arai, K; Pearce, E I F
2002-01-01
This study was carried out to examine interindividual differences in salivary variables related to plaque accumulation and to estimate their influence on the fluoride retention in plaque in vivo by a mineral-enriching solution. Two saliva samples were taken from 10 subjects, once after brushing and once after 24 h without brushing. Calcium, phosphate and monofluorophosphatase (MFPase) activity in the saliva samples were determined. The salivary flow rate and the debris index were also recorded. After plaque had formed over 3 days within in situ plaque-generating devices, subjects were instructed to rinse with a mineral-enriching mouthrinse three times a day on 4 consecutive days. Plaque exposed to distilled water plus flavoring agents served as a control. Fluoride-free dentifrice was used during the experimental period. Twenty-four hours after the last rinsing, the samples were removed from the mouth, and fluoride and mineral distributions in plaque analyzed using a method previously reported by the authors. Salivary flow, MFPase activity and calcium concentration in saliva were significantly higher after 24 h of plaque accumulation. Rinsing with the mineral-enriching solution produced retention of fluoride and phosphate in the outer and middle layers of plaque. Salivary calcium concentration had a direct effect on fluoride uptake in plaque, but no obvious relationship was found between other salivary variables and the plaque fluoride retention. The salivary calcium effect may be due to enhanced bacterial cell wall binding of fluoride via calcium bridging. Copyright 2002 S. Karger AG, Basel
Calcium Prerinse before Fluoride Rinse Reduces Enamel Demineralization: An in situ Caries Study.
Souza, João Gabriel S; Tenuta, Livia Maria Andaló; Del Bel Cury, Altair Antoninha; Nóbrega, Diego Figueiredo; Budin, Renan R; de Queiroz, Mateus X; Vogel, Gerald L; Cury, Jaime A
2016-01-01
A calcium (Ca) prerinse before a fluoride (F) rinse has been shown to increase oral F levels. We tested the anticaries effect of this combination in a dose-response in situ caries model. In a double-blind, crossover experiment, 10 volunteers carried enamel slabs in palatal appliances for 14 days, during which they rinsed twice/day with one of four rinse combinations: (1) a placebo prerinse (150 mM sodium lactate) followed by a distilled water rinse (negative control); (2) a placebo prerinse followed by a 250 ppm F rinse; (3) a placebo prerinse followed by a 1,000 ppm F rinse, or (4) a Ca prerinse (150 mM Ca, as calcium lactate) followed by a 250 ppm F rinse. Sucrose solution was dripped onto the slabs 8×/day to simulate a high cariogenic challenge. The percent surface hardness loss (%SHL) was significantly lower in the Ca prerinse used with the 250 ppm F rinse group (%SHL = 38.0 ± 21.0) when compared with the F rinse alone (%SHL = 59.5 ± 24.1) and similar to the 1,000 ppm F rinse group (%SHL = 42.0 ± 18.3). Compared with the 250 ppm F rinse, the Ca prerinse increased biofilm fluid F only twice (nonsignificant). However, it greatly increased F in biofilm solids (∼22×). The Ca prerinse had little effect on loosely or firmly bound enamel F. The results showed an increased level of protection against demineralization by the use of a Ca prerinse, which seems to be caused by the enhancement of F concentration in the biofilm. © 2016 S. Karger AG, Basel.
USDA-ARS?s Scientific Manuscript database
Whether a required Salmonella test series is passed or failed depends not only on the presence of the bacteria, but also on the methods for taking samples, the methods for culturing samples, and the statistics associated with the sampling plan. The pass-fail probabilities of the two-class attribute...
Stokman, M A; Burlage, F R; Spijkervet, F K L
2012-08-01
Promising results of a calcium phosphate (CP) mouth rinse on reduced severity of oral mucositis have been reported. The aim of this study was to determine the effect of a CP mouth rinse on the frequency, duration and severity of (chemo) radiation induced oral mucositis in patients with head-neck cancer. patients with oral malignancies, treated with (chemo) radiotherapy, were included. Patients rinsed four times a day with a CP mouth rinse. Patients not willing to rinse with the CP mouth rinse served as control. Mucositis was scored according to the WHO score at baseline and twice a week during the full course of (chemo) radiotherapy. Patient's self-reported mouth-throat soreness (MTS) was evaluated at the same time interval using a diary in the CP mouth rinse group. The outcomes on MTS were compared with a historical control group. Fifty-two patients were analysed: 25 CP mouth rinse group, 11 control group and 16 historical group. There was no significant difference between the CP group and control group on development and severity of oral mucositis. No significant difference was found for subjective outcomes on MTS between the CP group and the historical group. The CP mouth rinse seems to have no influence on the frequency, duration and severity of oral mucositis during (chemo) radiation in patients with head and neck cancer. A trend to develop less MTS for drinking and eating was found when applying the CP mouth rinse. © 2012 John Wiley & Sons A/S.
Water Exposure is a Common Risk Behavior Among Soft and Gas-Permeable Contact Lens Wearers
Richdale, Kathryn; Mitchell, Gladys Lynn; Kinoshita, Beth T.; Lam, Dawn Y.; Wagner, Heidi; Sorbara, Luigina; Chalmers, Robin L.; Collier, Sarah A.; Cope, Jennifer R.; Rao, Maya M.; Beach, Michael J.; Yoder, Jonathan S.
2017-01-01
Purpose: To understand soft contact lens (SCL) and gas-permeable (GP) lens wearers' behaviors and knowledge regarding exposure of lenses to water. Methods: The Contact Lens Risk Survey (CLRS) and health behavior questions were completed online by a convenience sample of 1056 SCL and 85 GP lens wearers aged 20 to 76 years. Participants were asked about exposing their lenses to water and their understanding of risks associated with these behaviors. Chi-square analyses examined relationships between patient behaviors and perceptions. Results: GP lens wearers were more likely than SCL wearers to ever rinse or store lenses in water (rinsing: 91% GP, 31% SCL, P < 0.001; storing: 33% GP, 15% SCL P < 0.001). Among SCL wearers, men were more likely to store (24% vs. 13%, P = 0.003) or rinse (41% vs. 29%, P = 0.012) their lenses in water. Showering while wearing lenses was more common in SCL wearers (86%) than GP lens wearers (67%) (P < 0.0001). Swimming while wearing lenses was reported by 62% of SCL wearers and 48% of GP lens wearers (P = 0.027). Wearers who rinsed (SCL; P < 0.0001, GP; P = 0.11) or stored lenses in water (SCL; P < 0.0001, GP P = 0.007) reported that this behavior had little or no effect on their infection risk, compared with those who did not. Both SCL (P < 0.0001) and GP lens wearers (P < 0.0001) perceived that distilled water was safer than tap water for storing or rinsing lenses. Conclusions: Despite previously published evidence of Acanthamoeba keratitis' association with water exposure, most SCL, and nearly all GP lens wearers, regularly expose their lenses to water, with many unaware of the risk. PMID:28410356
Validation of a 2 percent lactic acid antimicrobial rinse for mobile poultry slaughter operations.
Killinger, Karen M; Kannan, Aditi; Bary, Andy I; Cogger, Craig G
2010-11-01
Poultry processing antimicrobial interventions are critical for pathogen control, and organic, mobile operations in Washington seek alternatives to chlorine. Laboratory and field studies (three replications each) evaluated lactic acid efficacy as a chlorine alternative. For the laboratory study, retail-purchased, conventionally processed chicken wings inoculated with Salmonella were randomly assigned to the following treatments: Salmonella inoculation followed by no treatment (10 wings) or by 3-min rinses of water, 50 to 100 ppm of chlorine, or 2% lactic acid (20 wings for each rinse treatment). Wings were sampled for Salmonella enumeration on xylose lysine desoxycholate agar. During pastured poultry processing at mobile slaughter units for each field study replication, 20 chicken carcasses were randomly assigned to each treatment: untreated control or 3-min immersion in lactic acid or chlorine. Whole-carcass rinses were examined for aerobic plate count (APC) on tryptic soy agar and coliforms on violet red bile agar. Untreated controls were also examined for Salmonella. In the laboratory study, lactic acid produced a significant (P < 0.01) Salmonella reduction compared with the inoculated no-rinse, water, and chlorine treatments, which were statistically similar to each other. In the field study, no Salmonella was detected on untreated controls. Lactic acid produced significant >2-log (P < 0.01) reductions in APC and coliforms, whereas chlorine resulted in slight, but significant 0.4-log reductions (P < 0.01) and 0.21-log reductions (P < 0.05) in APC and coliforms compared with untreated controls. Considering laboratory and field studies, lactic acid produced greater reductions in Salmonella, APC, and coliforms, validating its effectiveness as a chlorine alternative in mobile poultry slaughter operations.
Water Exposure is a Common Risk Behavior Among Soft and Gas-Permeable Contact Lens Wearers.
Zimmerman, Aaron B; Richdale, Kathryn; Mitchell, Gladys Lynn; Kinoshita, Beth T; Lam, Dawn Y; Wagner, Heidi; Sorbara, Luigina; Chalmers, Robin L; Collier, Sarah A; Cope, Jennifer R; Rao, Maya M; Beach, Michael J; Yoder, Jonathan S
2017-08-01
To understand soft contact lens (SCL) and gas-permeable (GP) lens wearers' behaviors and knowledge regarding exposure of lenses to water. The Contact Lens Risk Survey (CLRS) and health behavior questions were completed online by a convenience sample of 1056 SCL and 85 GP lens wearers aged 20 to 76 years. Participants were asked about exposing their lenses to water and their understanding of risks associated with these behaviors. Chi-square analyses examined relationships between patient behaviors and perceptions. GP lens wearers were more likely than SCL wearers to ever rinse or store lenses in water (rinsing: 91% GP, 31% SCL, P < 0.001; storing: 33% GP, 15% SCL P < 0.001). Among SCL wearers, men were more likely to store (24% vs. 13%, P = 0.003) or rinse (41% vs. 29%, P = 0.012) their lenses in water. Showering while wearing lenses was more common in SCL wearers (86%) than GP lens wearers (67%) (P < 0.0001). Swimming while wearing lenses was reported by 62% of SCL wearers and 48% of GP lens wearers (P = 0.027). Wearers who rinsed (SCL; P < 0.0001, GP; P = 0.11) or stored lenses in water (SCL; P < 0.0001, GP P = 0.007) reported that this behavior had little or no effect on their infection risk, compared with those who did not. Both SCL (P < 0.0001) and GP lens wearers (P < 0.0001) perceived that distilled water was safer than tap water for storing or rinsing lenses. Despite previously published evidence of Acanthamoeba keratitis' association with water exposure, most SCL, and nearly all GP lens wearers, regularly expose their lenses to water, with many unaware of the risk.
Abbate, G M; Levrini, L; Caria, M P
2014-01-01
This study evaluated whether sodium bicarbonate applied on the oral mucosa through a new mucoadhesive spray (Cariex) could control a drop in salivary pH after a glucose rinse, and therefore enhance the buffering potential of saliva. A sample of 50 healthy adults was selected. At day 1, the measurement of salivary pH was performed in the lower fornix in correspondence with the lower molars. Each subject rinsed with 10 ml of a 10% glucose solution and then pH was monitored continually for 40 minutes. At day 2, the same experimental procedure was repeated and three shots of the spray were administered on the oral mucosa. The tested spray is composed of sodium bicarbonate, xylitol, and excipients. Without the mucoadhesive spray, salivary pH became significantly lower following the glucose rinse (p < 0.01). Following the spray, the time in which the pH remained lower than 6.0 was reduced statistically significantly (p < 0.01). A continual rise of salivary pH was observed for the 40 minutes in which the pH recording was performed. Conclusions: The use of a sodium bicarbonate spray on the mucosa was shown to control the lowering of salivary pH following carbohydrate consumption, and might therefore add to the prevention of caries and dental erosion.
The oral microflora in obesity and type-2 diabetes.
Shillitoe, Edward; Weinstock, Ruth; Kim, Taewan; Simon, Howard; Planer, Jessica; Noonan, Susan; Cooney, Robert
2012-01-01
Type 2 diabetes mellitus (T2DM) is prevalent in people with obesity. It has been proposed that these conditions are related to specific features of the microflora of the mouth and lower gastrointestinal (GI) tract. Hyperglycemia often resolves quickly after Roux-en-Y gastric bypass (RYGB) but the role of the GI microflora cannot be examined easily because of reduced intestinal mobility. We propose that the study of microorganisms present in the mouth of patients undergoing RYGB will contribute to our understanding of the role of bacteria in the pathogenesis of T2DM. To conduct a feasibility study to examine differences in oral microbes in obese patients with and without T2DM and to determine whether it is feasible to measure changes after gastric bypass surgery. Individuals with morbid obesity (n=29), of whom 13 had T2DM, were studied. Oral rinses, stool samples, and blood samples were obtained before RYGB, and oral rinses and blood samples were obtained at 2 and 12 weeks postsurgery. Prior to surgery, participants with T2DM had slightly higher total levels of oral bacteria than those without diabetes. Those with HbA1c > 6.5% had rather lower levels of Bifidobacteria in the mouth and stool. At 2 weeks post-RYGB, patients with T2DM were able to reduce or discontinue their hypoglycemic medications. Stool samples could not be obtained but oral rinses were readily available. The levels of oral Bifidobacteria had increased tenfold and levels of circulating endotoxin and tumor necrosis factor-alpha had decreased. The study of oral bacteria before and after RYGB is feasible and should be tested in larger patient populations to increase our understanding of the role of microorganisms in the pathogenesis of obesity and T2DM.
Gracia, Louise H; Rees, Gareth D; Brown, Alan; Fowler, Christabel E
2010-11-01
Firstly, to evaluate the in vitro anti-erosion efficacy of a new mouthrinse formulation containing 450 ppm fluoride using profilometry and microindentation. Secondly, to compare fluoride uptake by erosive lesions from two mouthrinses containing different fluoride sources using dynamic secondary ion mass spectrometry (DSIMS). Sound human enamel was treated (60s) with mouthrinses containing different fluoride concentrations, then immersed in 1.0% citric acid pH 3.8 for either 300 s or 30 min (Studies 1 & 2 respectively). Surface roughness and erosion depth were determined profilometrically in Study 1, and surface microhardness monitored as a function of time in Study 2. Lesion rehardening was monitored following a 60 s rinse and immersion in artificial saliva for 48 h (Study 3), whilst Study 4 employed DSIMS to quantify fluoride uptake by lesions treated (60s) with rinses containing either sodium fluoride (NaF) or a NaF/Olaflur/stannous chloride combination. The test rinse (450 ppm fluoride) suppressed surface roughening and bulk tissue loss versus all comparators (p< 0.0001), except in the latter measure for the rinse containing 112 ppm fluoride. The test rinse significantly inhibited enamel surface softening versus the three rinses containing ≤112 ppm fluoride (as NaF) at 30 min (p<0.05), but was not statistically significantly different from the 225 ppm fluoride rinse. The test rinse conferred statistically superior lesion rehardening versus all comparators at both 24 and 48 h (p< 0.0001). DSIMS demonstrated statistically significantly higher fluoride uptake by incipient erosive lesions treated with the test rinse versus the NaF/Olaflur/stannous rinse. Anti-erosion efficacy was positively correlated with fluoride concentration. DSIMS showed significantly higher levels of fluoride uptake by incipient erosive lesions treated with the 450 ppm fluoride rinse versus the NaF/Olaflur/stannous rinse. Copyright © 2010 Elsevier Ltd. All rights reserved.
Estimation of plant sampling uncertainty: an example based on chemical analysis of moss samples.
Dołęgowska, Sabina
2016-11-01
In order to estimate the level of uncertainty arising from sampling, 54 samples (primary and duplicate) of the moss species Pleurozium schreberi (Brid.) Mitt. were collected within three forested areas (Wierna Rzeka, Piaski, Posłowice Range) in the Holy Cross Mountains (south-central Poland). During the fieldwork, each primary sample composed of 8 to 10 increments (subsamples) was taken over an area of 10 m 2 whereas duplicate samples were collected in the same way at a distance of 1-2 m. Subsequently, all samples were triple rinsed with deionized water, dried, milled, and digested (8 mL HNO 3 (1:1) + 1 mL 30 % H 2 O 2 ) in a closed microwave system Multiwave 3000. The prepared solutions were analyzed twice for Cu, Fe, Mn, and Zn using FAAS and GFAAS techniques. All datasets were checked for normality and for normally distributed elements (Cu from Piaski, Zn from Posłowice, Fe, Zn from Wierna Rzeka). The sampling uncertainty was computed with (i) classical ANOVA, (ii) classical RANOVA, (iii) modified RANOVA, and (iv) range statistics. For the remaining elements, the sampling uncertainty was calculated with traditional and/or modified RANOVA (if the amount of outliers did not exceed 10 %) or classical ANOVA after Box-Cox transformation (if the amount of outliers exceeded 10 %). The highest concentrations of all elements were found in moss samples from Piaski, whereas the sampling uncertainty calculated with different statistical methods ranged from 4.1 to 22 %.
21 CFR 872.5580 - Oral rinse to reduce the adhesion of dental plaque.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Oral rinse to reduce the adhesion of dental plaque... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5580 Oral rinse to reduce the adhesion of dental plaque. (a) Identification. The device is assigned the generic name oral rinse to reduce...
21 CFR 872.5580 - Oral rinse to reduce the adhesion of dental plaque.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral rinse to reduce the adhesion of dental plaque... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5580 Oral rinse to reduce the adhesion of dental plaque. (a) Identification. The device is assigned the generic name oral rinse to reduce...
21 CFR 872.5580 - Oral rinse to reduce the adhesion of dental plaque.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Oral rinse to reduce the adhesion of dental plaque... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5580 Oral rinse to reduce the adhesion of dental plaque. (a) Identification. The device is assigned the generic name oral rinse to reduce...
21 CFR 872.5580 - Oral rinse to reduce the adhesion of dental plaque.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Oral rinse to reduce the adhesion of dental plaque... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5580 Oral rinse to reduce the adhesion of dental plaque. (a) Identification. The device is assigned the generic name oral rinse to reduce...
21 CFR 872.5580 - Oral rinse to reduce the adhesion of dental plaque.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Oral rinse to reduce the adhesion of dental plaque... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5580 Oral rinse to reduce the adhesion of dental plaque. (a) Identification. The device is assigned the generic name oral rinse to reduce...
Detection of genogroup IV norovirus in wastewater and river water in Japan.
Kitajima, M; Haramoto, E; Phanuwan, C; Katayama, H; Ohgaki, S
2009-11-01
To test wastewater and river water in Japan for genogroup IV norovirus (GIV NoV). Influent and effluent samples from a wastewater treatment plant and the Tamagawa River water samples were collected monthly for a year. The water samples were concentrated by the adsorption-elution method, using an HA electronegative filter with acid rinse procedure, followed by quantitative detection of GIV NoV using TaqMan-based real-time RT-PCR. Both wastewater and river water samples showed a high positive ratio of GIV NoV during winter and spring. The highest concentration in wastewater and river water was 6.9 x 10(4) and 1.5 x 10(4) copies l(-1), respectively. Presence of GIV NoV in the environments demonstrates that not only GI and GII NoVs but also GIV strains are circulating and that routine monitoring of GIV NoV in water environments is recommended to understand its epidemics, environmental distribution and potential health risks. This is the first study providing quantitative data on the occurrence of GIV NoV in environmental water over a 1-year period.
Oil-based compositions as saliva substitutes: A pilot study to investigate in-mouth retention.
Hanning, Sara M; Medlicott, Natalie J
2016-03-30
This pilot study aimed to compare the in-mouth retention of an oil-based saliva substitute (emulsion, consisting of rice bran oil, soy lecithin and water) with water and a 1% w/v methylcellulose suspension (polymer) in healthy volunteers. Each formulation was tagged with 1 mmol/L lithium and participants (n=30) rinsed their mouth with one randomly assigned formulation (emulsion, polymer or water) for 30s, before expectorating into a cup. Concentration of lithium expectorated was measured and amount of each formulation remaining in the mouth was estimated. Patient acceptability was investigated using questionnaires, and Fourier-Transform Infrared spectroscopy (FTIR) was used to determine the presence of oil in expectorated samples. Immediately after rinsing, taste was rated lower in the emulsion group compared to the polymer or water groups (p>0.05), although variability was high. Mean retention was highest in the emulsion group, with a difference of 8.34 ± 2.71% (p=0.003) and 4.57 ± 2.71% (p=0.06) compared with the water and polymer groups, respectively. FTIR confirmed the presence of oil in all expectorated emulsion samples. The emulsion was not inferior to the polymer in terms of retention immediately after rinsing. The next step is to conduct larger clinical studies over longer time periods in participants with salivary hypofunction. Copyright © 2016 Elsevier B.V. All rights reserved.
Root caries prevention via sodium fluoride, chlorhexidine and silver diamine fluoride in vitro.
Göstemeyer, Gerd; Kohls, Anna; Paris, Sebastian; Schwendicke, Falk
2018-01-31
Uncertainty exists as to how to best prevent root caries development. The aim of the present study was to compare sodium fluoride (NaF), chlorhexidine (CHX) and silver diamine fluoride (SDF) varnishes (V) and rinses (R) regarding their caries preventive effect in an artificial caries biofilm model. 140 bovine root dentin samples were cut, polished and embedded. Samples were allocated to seven treatment groups (n = 20/group): Four varnishes (applied once prior biofilm challenge): 38% SDF (SDFV), 35% CHX-varnish (CHXV), 22,600 ppm NaF-varnish (NaFV), placebo-varnish (PV); two rinses (applied once daily during biofilm challenge): 500 ppm NaF solution (NaFR), 0.1% CHX solution (CHXR); one untreated group. Caries was induced in a multi-station, continuous-culture Lactobacillus rhamnosus GG (LGG) biofilm model. Bacteria were inoculated 1 × daily, while 2% sucrose was supplied 8 ×/day followed by artificial saliva for 10 min. After 12 days, mineral loss (ΔZ) was measured in the effect area and adjacent to the varnished areas. Bacterial counts were assessed on de-Man-Rogosa-Sharpe agar. ΔZ was significantly lower in the NaFR group compared with all other groups. Varnishes did not significantly prevent mineral loss in adjacent areas. None of the agents had a significant antimicrobial effect on LGG. Regular fluoride rinses showed highest root caries-preventive effect.
ERIC Educational Resources Information Center
Sutley, Jane
2009-01-01
The author of this article describes how her eighth grade art students heighten their awareness of differences between their public self and their inner self by: manipulating water bottles to create sculptural self-portraits; constructing armatures of the generic person in "The Scream" by Edward Munch; finding and collecting examples of images and…
Services provided in support of the planetary quarantine requirements
NASA Technical Reports Server (NTRS)
Favero, M. S.
1972-01-01
Results are presented of laboratory experiments conducted on the thermal resistance of naturally occurring airborne spores and microbiological examinations of space hardware using long-term slit samplers and rodac plate and swab-rinse methods of sampling environmental surfaces.
Fatemeh, Koohpeima; Mohammad Javad, Mokhtari; Samaneh, Khalafi
2017-01-01
The purpose of this study was to investigate the effect of silver nanoparticles on composite shear bond strength using one etch and rinse and one self-etch adhesive systems. Silver nanoparticles were prepared. Transmission electron microscope and X-ray diffraction were used to characterize the structure of the particles. Nanoparticles were applied on exposed dentin and then different adhesives and composites were applied. All samples were tested by universal testing machine and shear bond strength was assesed. Particles with average diameter of about 20 nm and spherical shape were found. Moreover, it was shown that pretreatment by silver nanoparticles enhanced shear bond strength in both etch and rinse, and in self-etch adhesive systems (p≤0.05). Considering the positive antibacterial effects of silver nanoparticles, using them is recommended in restorative dentistry. It seems that silver nanoparticles could have positive effects on bond strength of both etch-and-rinse and self-etch adhesive systems. The best results of silver nanoparticles have been achieved with Adper Single Bond and before acid etching.
Franchin, P R; Ogliari, P J; Batista, C R V
2007-04-01
1. The frequency of thermophilic Campylobacter spp. on broiler carcases was determined during processing in a Southern Brazil slaughterhouse. Samples were collected after defeathering, evisceration, water chilling and freezing. In addition, samples were obtained from the water of the chiller tank and from the surface of equipment in direct contact with the chicken. 2. Samples (335) were analysed and 71.3% were positive for Campylobacter. The frequency of Campylobacter spp. on carcases rinsed in BPW and skin samples from carcases was 49 of 72 (68.0%) after defeathering, 50 of 72 (69.4%) after evisceration, 61 of 72 (84.7%) after chilling, and 46 of 72 (63.9%) after freezing. Campylobacter was positive for 21 of 23 (91.3%) samples in the chilling water and for 12 of 24 (50.0%) samples on the table surface. 3. The frequency of qualitative analysis for Campylobacter spp. was reduced in frozen chickens, but not during the slaughtering process. The use of drinking water alone as a decontaminant to reduce the incidence of Campylobacter spp. during slaughter is therefore not sufficient. Furthermore, to ensure food safety, chickens must be cooked properly before consuming.
NASA Astrophysics Data System (ADS)
Jacobsen, Jerrold J.; Houston Jetzer, Kelly; Patani, Néha; Zimmerman, John; Zweerink, Gerald
1995-07-01
Significant attention is paid to the proper technique for reading a meniscus. Video shows meniscus-viewing techniques for colorless and dark liquids and the consequences of not reading a meniscus at eye level. Lessons are provided on approaching the end point, focusing on end point colors produced via different commonly used indicators. The concept of a titration curve is illustrated by means of a pH meter. Carefully recorded images of the entire range of meniscus values in a buret, pipet, and graduated cylinder are included so that you can show your students, in lecture or pre-lab discussion, any meniscus and discuss how to read the buret properly. These buret meniscus values are very carefully recorded at the rate of one video frame per hundredth of a milliliter, so that an image showing any given meniscus value can be obtained. These images can be easily incorporated into a computer-based multimedia environment for testing or meniscus-reading exercises. Two of the authors have used this technique and found the exercise to be very well received by their students. Video on side two shows nearly 100 "bloopers", demonstrating both the right way and wrong ways to do tasks associated with titration. This material can be used in a variety of situations: to show students the correct way to do something; to test students by asking them "What is this person doing wrong?"; or to develop multimedia, computer-based lessons. The contents of Titration Techniques are listed below: Side 1 Titration: what it is. A simple titration; Acid-base titration animation; A brief redox titration; Redox titration animation; A complete acid-base titration. Titration techniques. Hand technique variations; Stopcock; Using a buret to measure liquid volumes; Wait before reading meniscus; Dirty and clean burets; Read meniscus at eye level (see Fig. 1); Meniscus viewing techniques--light colored liquids; Meniscus viewing techniques--dark liquids; Using a magnetic stirrer; Rough titration; Significant figures; Approaching the end point; End point colors; Titration with a pH meter; Titration curves; Colors of indicators. Meniscus values. Buret meniscus values; Pipet meniscus values; Graduated cylinder meniscus values. Side 2"Bloopers". Introducing the people; Titration animation; Inspecting the buret; Rinsing the buret with water; Preparing a solid sample; Obtaining a liquid sample; Delivering a liquid sample with a Mohr pipet; Pipetting a liquid sample with a Mohr pipet; Rinsing the Mohr pipet with sample; Using the Mohr pipet to transfer sample; Delivering a liquid sample with a volumetric pipet; Pipetting a liquid sample with a volumetric pipet; Rinsing the volumetric pipet with sample; Using the volumetric pipet to transfer sample; Obtaining the titrant; Rinsing the buret with titrant; Filling the buret with titrant; Adding the indicator; The initial reading; Beginning the titration; Delivering titrant; The final reading. Figure 3. Near the end point a single drop of titrant can cause a lasting color change.
Mercury and Silver in Clinic Wastewater Goodfellow AFB, Texas
1989-07-01
SE(JrTY CLASSIFICATION 1b RESTRICTIVE MARINGSuncfassi I ed N/A 2a SCRITY CLASSIFICATION AUTHORITY 3 DISTRIBUTION / AVAiLABILIT OF REPORT N/A Approved...Material suctioned from teeth restoration are collected in a central separator/collection tank. The tank is automatically cleaned by rinsing it with water ...insoluble or sparingly soluble in water . In neutral or alkaline solutions, mercury is oxidized directly to the mercuric state with the formatin of
Giertsen, E; Scheie, A A
1995-10-01
Inhibition of plaque acidogenicity by a mouthrinse with chlorhexidine (CHX) or zinc ions has been ascribed to a prolonged bacteriostasis due to substantive properties of the agents. The present aim was to study the effects of mouthrinses with CHX and Zn ions combined with fluoride on the viability and glycolytic activity of dental plaque in order to assess the bacteriostatic versus possible bactericidal effects. Following 2 d of plaque accumulation, 4 groups of 10 students rinsed with either 12 mM NaF (F), 0.55 mM CHX diacetate+F (F-CHX), 10 mM Zn acetate+F (F-Zn), or with the three agents in combination (F-CHX-Zn). Plaque samples were collected before and 90 min after mouthrinsing. Thereafter, the in vivo plaque pH response to sucrose was monitored in each student using touch microelectrodes. F-CHX and F-CHX-Zn reduced the in vivo pH fall significantly as compared with F, whereas F-Zn exerted a non-significant inhibition. Pooled pre- and post-rinse plaque samples were used to measure the pH fall during fermentation of [14C]-glucose, and the glycolytic profiles were analyzed by HPLC. Bacterial viability was assessed by counting the colony-forming units (CFU). All mouthrinses except F reduced glucose consumption and acid formation and thus the pH fall. F-CHX reduced the CFU equal to the reduction of glucose consumption, indicating that inhibition of plaque acidogenicity was due to a bactericidal rather than a bacteriostatic effect. F and F-Zn did not reduce the CFU, thus F-Zn decreased glucose metabolism without affecting plaque viability. F-CHX-Zn reduced both the CFU and glucose metabolism of surviving plaque microorganisms.
Cole, Lynette K; Luu, Dao H; Rajala-Schultz, Paivi J; Meadows, Cheyney; Torres, Audrey H
2007-04-01
The purpose of this study was to evaluate the in vitro activity of an ear rinse containing tromethamine, EDTA, benzyl alcohol and 0.1% ketoconazole in purified water on Malassezia organisms from dogs with otitis externa. Malassezia organisms were collected from ear swab samples from the external ear canal of 19 dogs with otitis externa plus one control strain of Malassezia pachydermatis. Three test solutions were evaluated: ER (EDTA, tromethamine, benzyl alcohol), ER + keto (EDTA, tromethamine, benzyl alcohol, ketoconazole), and H2O (purified water). Ten-millilitre aliquots of each test solution was transferred into 20 tubes and inoculated with one of the isolates (1 tube per isolate: 19 clinical and 1 control strain). Samples were retrieved from each tube at five time points (0, 15, 30, 45 and 60 min), transferred to Petri dishes, mixed with Sabouraud dextrose agar supplemented with 0.5% Tween 80 and incubated. Following incubation, the plates were examined for growth and colonies counted as colony-forming units per millilitre. The data were analysed using a repeated measures analysis, with pair-wise comparisons of solution-time combinations. There was a significant reduction in Malassezia growth in ER + keto at all time points (P < 0.0001) compared to time zero. Neither ER nor H2O had any effect on the growth of Malassezia. ER + keto was significantly more effective in reducing Malassezia growth (P < 0.0001) at all time points compared to both ER and H2O. ER + keto may be useful in the treatment of Malassezia otitis externa. Future studies should be performed to evaluate the in vivo efficacy of ER + keto as treatment for otic infections caused by Malassezia.
Brumbaugh, William G.; Morman, Suzette A.; May, Thomas W.
2011-01-01
Vegetation, sub-surface peat, and road dust were sampled near the Delong Mountain Transportation System (DMTS) haul road in northwest Alaska in 2005-2006 to document aluminum, barium, cadmium, lead, and zinc concentrations, and to evaluate bioaccessibility of these metals. The DMTS haul road is the transport corridor between Red Dog Mine (a large-scale, lead-zinc mine and mill) and the coastal shipping port, and it traverses National Park Service lands. Compared to reference locations, total metal concentrations in four types of vegetation (birch, cranberry, and willow leaves, and cotton grass blades/stalks) collected 25 m from the haul road were enriched on average by factors of 3.5 for zinc, 8.0 for barium, 20 for cadmium, and 150 for lead. Triple rinsing of vegetation with a water/methanol mixture reduced metals concentrations by at most 50%, and cadmium and zinc concentrations were least affected by rinsing. Cadmium and zinc bioaccessibility was greater in vegetation (50% to 100%) than in dust (15% to 20%); whereas the opposite pattern was observed for lead bioaccessibility (<30% in vegetation; 50% in dust). Barium exhibited low-to-intermediate bioaccessibility in dust and vegetation (20% to 40%), whereas aluminum bioaccessibility was relatively low (<6%) in all sample types. Our reconnaissance-level study indicates that clean-up and improvements in lead/zinc concentrate transfer activities have been effective; however, as of 2006, metal dispersion from past and/or present releases of fugitive dusts along the DMTS road still may have been contributing to elevated metals in surface vegetation. Vegetation was most enriched in lead, but because bioaccessibility of cadmium was greater, any potential risks to animals that forage near the haul road might be equally important for both of these metals.
Kocak, Mustafa Murat; Ozcan, Suat; Kocak, Sibel; Topuz, Ozgur; Erten, Hulya
2009-01-01
Objectives The aim of this study was to evaluate the effectiveness of three different antiseptic mouthrinse solutions on the saliva samples obtained from the individuals, who had high caries activity rate. Methods The efficacy of three antiseptic mouthrinses were evaluated in a study with healthy volunteers. The three antiseptic solutions used in this study were 0.1% octenidine dihydrochloride (Octenisept, Schülke&Mayr, UK), 0.12% chlorhexidine digluconate (Kloroben, Drogsan, Turkey) and an antimicrobial enzymatic rinse (Biotene, Laclede, Inc, USA). A total of 27 adult volunteer subjects were participated in the study. The subjects were stratified into three balanced group. Then the mouth rinses were used by each group according to the manufacturer’s directions. The subjects were restricted for 60 minutes for food intake after using the prescribed mouthrinse. The saliva samples were collected from the volunteers at 1, 10 and 60 minutes after their usage in tubes. The tubes were kept in +4°C in a fridge till the evaluation. 10−3 and 10−5 dilutions were prepared for each solution and S. mutans were evaluated according to total number of colony forming unit (CFU) per ml. The dilutions were spreaded on the surface of Brucella agar plates for anaerobic incubation for 48 hours. The dilutions were 100, 10−3 and 10−5 of the solutions Kloroben, Biotene, Octenisept, and the time factor were 0, 1, 10 and 60 minutes. The statistical analyses were performed by Duncan and Bonferroni tests. Results Octenisept was found to be more effective over S. mutans than the other mouthrinse solutions (P<.05). Conclusions All mouthrinse solutions except Biotene were effective on oral microorganisms. PMID:19262732
The effect of different mouth rinse products on intra-oral halitosis.
Erovic Ademovski, S; Lingström, P; Renvert, S
2016-05-01
To evaluate the effect of different mouth rinses 12 h after rinsing on genuine intra-oral halitosis. Twenty-four adults with halitosis were included in a double-blind, crossover, randomized clinical trial. Halitosis was evaluated 12 h after rinsing with placebo and five mouth rinse products containing zinc acetate and chlorhexidine diacetate; zinc lactate, chlorhexidine and cetylpyridinium chloride; zinc acetate and chlorhexidine diacetate with reduced amounts of mint and menthol; zinc chloride and essential oil; and chlorine dioxide using the organoleptic method and a gas chromatograph. Test periods were separated by 1 week. Hydrogen sulphide (H2 S), methyl mercaptan (MM) and the organoleptic scores (OLS) were significantly reduced 12 h following rinsing with all substances compared to placebo (P < 0.05). H2 S was more effectively reduced after rinsing with zinc acetate and chlorhexidine diacetate and zinc acetate and chlorhexidine diacetate with reduced amounts of mint and menthol compared to rinsing with zinc chloride and essential oil (P < 0.05), and significantly lower values of MM were obtained after rinsing with zinc acetate and chlorhexidine diacetate compared to zinc lactate, chlorhexidine and cetylpyridinium chloride (P < 0.05). The percentage effectively treated individuals (H2 S (<112 ppb), MM (<26 ppb) and OLS score <2) varied from 58% percentage (zinc acetate and chlorhexidine diacetate) to 26% (zinc chloride and essential oil). All treatments resulted in reduction in halitosis 12 h after rinsing compared to placebo. H2 S and MM were most effectively reduced by zinc acetate and chlorhexidine diacetate. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Antiseptic mouth rinses: an update on comparative effectiveness, risks and recommendations.
Osso, Diane; Kanani, Nehal
2013-02-01
Antiseptic mouth rinses are widely recommended and marketed to improve oral health. This article summarizes current studies on the comparative effectiveness of selected antiseptic mouth rinses in controlling plaque and gingivitis, as well as risks associated with daily exposure, including salivary flow rate, oral cancer and wear of composite restorations. Electronic database searches were conducted using Google Scholar and PubMed to identify articles comparing the effectiveness of 4 commercially marketed antiseptic mouth rinses differing in active ingredients (0.12% chlorhexidine gluconate, essential oils (menthol, thymol and eucalyptol) and methyl salicylate, 0.7% cetylpyridinium chloride and 20% aloe vera gel) for controlling plaque and gingivitis. Criteria for inclusion included controlled clinical trials and systematic reviews appearing in English language publications evaluating the comparative effectiveness of the mouth rinses in controlling plaque and gingivitis, as well as risks associated with daily usage. The majority of studies have shown mouth rinses containing chlorhexidine gluconate or essential oils and methyl salicylate provide clinically significant anti-gingivitis and anti-plaque benefits. Cetylpyridinium chloride has been found to provide only limited clinical benefits compared to inactive control mouth rinse. Inadequate evidence is available to evaluate the clinical effectiveness of aloe vera gel. Chlorhexidine, essential oils and cetylpyridinium have been found to be safe. However, limited data are available on the effects of the mouth rinse on wear patterns of dental restorations. Studies reviewed reported no significant difference in salivary flow rate related to alcohol based mouth rinse. Research supports the effectiveness of antiseptic mouth rinses in reducing plaque and gingivitis as an adjunct to home care. Insufficient evidence is available to support the claim that oral antiseptics can reduce the risk of developing periodontitis or the rate of progression of periodontitis.
Richtrova, Pavlina; Opatrny, Karel; Vit, Ladislav; Sefrna, Frantisek; Perlik, Radek
2007-10-01
Thrombogenicity is an important parameter of haemodialysis (HD) membrane biocompatibility. The surface of the polyacrylonitrile AN69 ST membrane is coated with a polyethylenimine. This modification allows heparin adsorption. The binding of heparin to the membrane surface occurs during priming of the extracorporeal circuit (ECC) by rinsing it with saline and heparin. Our aims were to assess and compare the thrombogenicity of the AN69 ST membrane under conditions of two extracorporeal circuit (ECC) rinse protocols-with and without unfractionated heparin (UFH). In a prospective, crossover and randomized study, we examined 10 patients during HD after ECC preparation with either rinse protocols. Prior to HD and at 15, 60 and 240 min, we determined plasma levels of the thrombin-antithrombin complexes (TAT), platelet factor 4 (PF4), heparin concentration (antiXa) and thrombocyte count. Systemic anticoagulation was performed using UFH. During HD after ECC rinse without UFH, there was a significantly earlier and more marked increase in TAT compared with UFH-containing rinse (P <0.05). Using Spearman coefficient, we demonstrated a significant correlation between TAT and antiXa at 60 min (r = -0.534) and 240 min (r = -0.538). A comparison of the TAT/antiXa ratios between rinses at 60 min revealed a significantly higher increase in TAT following UFH-free rinse (P <0.05). There was no difference in PF4 between the rinses. Platelet count did not change significantly during HD using either rinse protocol. Based on plasma TAT levels, ECC priming with an UFH-containing solution reduces the thrombogenicity of the AN69 ST membrane. There is no significant difference between both types of priming concerning PF4 and thrombocyte count.
Self-etch and etch-and-rinse adhesive systems in clinical dentistry.
Ozer, Fusun; Blatz, Markus B
2013-01-01
Current adhesive systems follow either an "etch-and-rinse" or "self-etch" approach, which differ in how they interact with natural tooth structures. Etch-and-rinse systems comprise phosphoric acid to pretreat the dental hard tissues before rinsing and subsequent application of an adhesive. Self-etch adhesives contain acidic monomers, which etch and prime the tooth simultaneously. Etch-and-rinse adhesives are offered as two- or three-step systems, depending on whether primer and bonding are separate or combined in a single bottle. Similarly, self-etch adhesives are available as one- or two-step systems. Both etch-and-rinse and self-etch systems form a hybrid layer as a result of resins impregnating the porous enamel or dentin. Despite current trends toward fewer and simpler clinical application steps, one-step dentin bonding systems exhibit bonding agent lower bond strengths and seem less predictable than multi-step etch-and-rinse and self-etch systems. The varying evidence available today suggests that the choice between etch-and-rinse and self-etch systems is often a matter of personal preference. In general, however, phosphoric acid creates a more pronounced and retentive etching pattern in enamel. Therefore, etch-and-rinse bonding systems are often preferred for indirect restorations and when large areas of enamel are still present. Conversely, self-etch adhesives provide superior and more predictable bond strength to dentin and are, consequently, recommended for direct composite resin restorations, especially when predominantly supported by dentin.
Chon, Jung-Whan; Kim, Hyunsook; Yim, Jin-Hyeok; Song, Kwang-Young; Moon, Jin-San; Kim, Young-Jo; Seo, Kun-Ho
2013-05-01
The Karmali agar was modified by supplementation with a high concentration of polymyxin B. The goal of the study was to evaluate the effect of a high concentration of polymyxin B on the ability and selectivity of the modified Karmali agar to isolate Campylobacter jejuni and Campylobacter coli from whole chicken carcass rinse. A total of 80 whole chickens were rinsed with 400 mL of buffer peptone water. The rinsed samples were incubated with 2× blood-free modified Bolton enrichment broth for 48 h, and then streaked onto unmodified Karmali agar and modified Karmali agar supplemented with 100000 IU/L polymixin B (P-Karmali agar). The suspected colonies were finally confirmed by colony PCR. The P-Karmali agar exhibited a significantly better (P < 0.05) isolation rate than the unmodified Karmali agar (P-Karmali agar, 73.8%; unmodified Karmali agar, 33.8%). Moreover, the selectivity of the P-Karmali agar was also better (P < 0.05) than that of the other selective agar when comparing the number of contaminated plates (P-Karmali agar, 68.8%; unmodified Karmali agar, 87.5%) and growth index of competing flora (P-Karmali agar, 1.4; unmodified Karmali agar, 2.7). The improved selective agar excluded competing flora resistant to antibiotic agents in unmodified Karmali agar, increasing isolation rate and selectivity for C. jejuni and C. coli. © 2013 Institute of Food Technologists®
The effectiveness of propolis on gingivitis: a randomized controlled trial.
Bretz, Walter A; Paulino, Niraldo; Nör, Jacques E; Moreira, Alexandre
2014-12-01
A randomized, double-blind, controlled clinical trial was conducted to evaluate the effectiveness of a propolis rinse on induced gingivitis by using the co-twin study design. Twenty-one twin pairs (n=42) were enrolled in a gingivitis study with oral hygiene promotion (14 days) and gingivitis induction (21 days). During the gingivitis induction phase, one member of the twin pair was randomly assigned to a 2% typified propolis rinse, and the other was assigned a color-matched 0.05% sodium fluoride plus 0.05% cetylpyridinium chloride rinse (positive control). Patients rinsed twice daily with 20 mL for 30 seconds for 21 days. Gingivitis was measured on days -14 (baseline), 0 (after hygiene phase), and 21 (after no-hygiene phase) by using the Papillary Bleeding Score (PBS) and by standard digital imaging of the gum tissues (G-parameter). The 38 persons who completed the study (age 13-22 years) were well balanced according to PBS at baseline and G-parameter after the initial hygiene phase. After 21 days without oral hygiene, the propolis rinse and positive control rinse groups did not differ significantly for average PBS measurements or G-parameter. Use of a 2% typified propolis rinse was equivalent to a positive control rinse during a 21-day no-hygiene period.
Moving zone Marangoni drying of wet objects using naturally evaporated solvent vapor
Britten, Jerald A.
1997-01-01
A surface tension gradient driven flow (a Marangoni flow) is used to remove the thin film of water remaining on the surface of an object following rinsing. The process passively introduces by natural evaporation and diffusion of minute amounts of alcohol (or other suitable material) vapor in the immediate vicinity of a continuously refreshed meniscus of deionized water or another aqueous-based, nonsurfactant rinsing agent. Used in conjunction with cleaning, developing or wet etching application, rinsing coupled with Marangoni drying provides a single-step process for 1) cleaning, developing or etching, 2) rinsing, and 3) drying objects such as flat substrates or coatings on flat substrates without necessarily using heat, forced air flow, contact wiping, centrifugation or large amounts of flammable solvents. This process is useful in one-step cleaning and drying of large flat optical substrates, one-step developing/rinsing and drying or etching/rinsing/drying of large flat patterned substrates and flat panel displays during lithographic processing, and room-temperature rinsing/drying of other large parts, sheets or continuous rolls of material.
Moving zone Marangoni drying of wet objects using naturally evaporated solvent vapor
Britten, J.A.
1997-08-26
A surface tension gradient driven flow (a Marangoni flow) is used to remove the thin film of water remaining on the surface of an object following rinsing. The process passively introduces by natural evaporation and diffusion of minute amounts of alcohol (or other suitable material) vapor in the immediate vicinity of a continuously refreshed meniscus of deionized water or another aqueous-based, nonsurfactant rinsing agent. Used in conjunction with cleaning, developing or wet etching application, rinsing coupled with Marangoni drying provides a single-step process for (1) cleaning, developing or etching, (2) rinsing, and (3) drying objects such as flat substrates or coatings on flat substrates without necessarily using heat, forced air flow, contact wiping, centrifugation or large amounts of flammable solvents. This process is useful in one-step cleaning and drying of large flat optical substrates, one-step developing/rinsing and drying or etching/rinsing/drying of large flat patterned substrates and flat panel displays during lithographic processing, and room-temperature rinsing/drying of other large parts, sheets or continuous rolls of material. 5 figs.
Balada-Llasat, Joan-Miquel; Elkins, Camille; Swyers, Lettie; Bannerman, Tammy; Pancholi, Preeti
2010-07-01
Cupriavidus pauculus is a water microorganism rarely isolated from clinical specimens. We describe a pseudo-outbreak in which multiple strains that were associated with moistening of culturette swabs with tap water were isolated from a single clinic before collecting the patient specimen.
The antimicrobial efficacy of commercial dentifrices.
Haraszthy, Violet I; Zambon, Joseph J; Sreenivasan, Prem K
2010-01-01
This investigation compared the effects of a fluoride dentifrice and toothpastes formulated with antimicrobial ingredients (stannous fluoride and triclosan/copolymer) on oral micro-organisms, including those found in samples taken from the human oral cavity. Microbiological techniques determined the minimum inhibitory concentrations (MICs) of each dentifrice necessary to inhibit the growth of bacterial strains from the healthy oral cavity, as well as those found in dental caries, periodontal disease, and halitosis. Ex vivo studies utilized oral rinse samples and supragingival plaque from adults to determine antimicrobial effects on the entire microbial diversity of these samples, including biofilm-derived micro-organisms. The triclosan/copolymer dentifrice demonstrated the lowest MICs and significantly inhibited Gram-positive and Gram-negative bacteria (including the periodontal pathogens Aggregatibacter actinomycetemcomitans, Eikenella corrodens, and Fusobacterium nucleatum). In the ex vivo tests, the triclosan/copolymer dentifrice demonstrated substantial inhibition in the oral rinse samples over each treatment period (p > 0.0005) as compared to either the fluoride or stannous fluoride dentifrices. Similarly, the triclosan/copolymer dentifrice demonstrated the highest inhibition of micro-organisms in the supragingival plaque biofilm (p < 0.0005). No significant differences were observed between the fluoride and stannous fluoride dentifrices (p > 0.5).
Verma, Radhika; Singh, Udai Pratap; Tyagi, Shashi Prabha; Nagpal, Rajni; Manuja, Naveen
2013-01-01
Objective: To evaluate the effect of 2% chlorhexidine (CHX) and 30% proanthocyanidin (PA) application on the immediate and long-term bond strength of simplified etch-and-rinse adhesives to dentin. Materials and Methods: One hundred twenty extracted human molar teeth were ground to expose the flat dentin surface. The teeth were equally divided into six groups according to the adhesives used, either Tetric N Bond or Solobond M and pretreatments given either none, CHX, or PA. Composite cylinder was bonded to each specimen using the respective adhesive technique. Half the samples from each group (n = 10) were then tested immediately. The remaining samples were tested after 6 month storage in distilled water. Results: The mean bond strength of samples was not significantly different upon immediate testing being in the range of 8.4(±0.7) MPa. The bond strength fell dramatically in the control specimens after 6 month storage to around 4.7(±0.33) MPa, while the bond strength was maintained in the samples treated with both CHX and PA. Conclusion: Thirty percent PA was comparable to 2% CHX with respect to preservation of the resin dentin bond over 6 months. PMID:23956543
Mercury pollution in vegetables, grains and soils from areas surrounding coal-fired power plants
NASA Astrophysics Data System (ADS)
Li, Rui; Wu, Han; Ding, Jing; Fu, Weimin; Gan, Lijun; Li, Yi
2017-05-01
Mercury contamination in food can pose serious health risks to consumers and coal-fired power plants have been identified as the major source of mercury emissions. To assess the current state of mercury pollution in food crops grown near coal-fired power plants, we measured the total mercury concentration in vegetables and grain crops collected from farms located near two coal-fired power plants. We found that 79% of vegetable samples and 67% of grain samples exceeded the PTWI's food safety standards. The mercury concentrations of soil samples were negatively correlated with distances from the studied coal-fired power plants, and the mercury contents in lettuce, amaranth, water spinach, cowpea and rice samples were correlated with the mercury contents in soil samples, respectively. Also, the mercury concentrations in vegetable leaves were much higher than those in roots and the mercury content of vegetable leaves decreased significantly after water rinses. Our calculation suggests that probable weekly intake of mercury for local residents, assuming all of their vegetables and grains are from their own farmland, may exceed the toxicologically tolerable values allowed, and therefore long-term consumptions of these contaminated vegetables and grains may pose serious health risks.
Mercury pollution in vegetables, grains and soils from areas surrounding coal-fired power plants
Li, Rui; Wu, Han; Ding, Jing; Fu, Weimin; Gan, Lijun; Li, Yi
2017-01-01
Mercury contamination in food can pose serious health risks to consumers and coal-fired power plants have been identified as the major source of mercury emissions. To assess the current state of mercury pollution in food crops grown near coal-fired power plants, we measured the total mercury concentration in vegetables and grain crops collected from farms located near two coal-fired power plants. We found that 79% of vegetable samples and 67% of grain samples exceeded the PTWI’s food safety standards. The mercury concentrations of soil samples were negatively correlated with distances from the studied coal-fired power plants, and the mercury contents in lettuce, amaranth, water spinach, cowpea and rice samples were correlated with the mercury contents in soil samples, respectively. Also, the mercury concentrations in vegetable leaves were much higher than those in roots and the mercury content of vegetable leaves decreased significantly after water rinses. Our calculation suggests that probable weekly intake of mercury for local residents, assuming all of their vegetables and grains are from their own farmland, may exceed the toxicologically tolerable values allowed, and therefore long-term consumptions of these contaminated vegetables and grains may pose serious health risks. PMID:28484233
DOE Office of Scientific and Technical Information (OSTI.GOV)
Epstein, J.B.; Stevenson-Moore, P.
1986-08-01
Benzydamine hydrochloride rinse reduced pain associated with radiation mucositis when it was used during the course of radiation therapy. Fewer patients using benzydamine rinse required systemic analgesics. All patients using benzydamine tolerated the rinse well and continued with regular rinsing throughout the course of radiation therapy. Benzydamine hydrochloride is currently undergoing clinical trials in the United States for application for approval from the Food and Drug Administration.
Fan, Xuetong; Gurtler, Joshua B; Sokorai, Kimberly J B
2018-09-02
A study was conducted to evaluate the effects of post-treatment rinsing with water on the inactivation efficacy of acid treatments against Salmonella inoculated onto stem scar areas of two types of tomatoes. In addition, impact on fruit quality was investigated during 21 days post-treatment storage at 10 °C. A four-strain cocktail of Salmonella enterica (S. Montevideo, S. Newport, S. Saintpaul, and S. Typhimurium) was inoculated onto stem scar areas of grape and large round tomatoes. The inoculated fruits were then treated for 2 min with the following solutions: water, 2% lactic acid +2% acetic acid +2% levulinic acid, 1.7% lactic acid +1.7% acetic acid +1.7% levulinic acid, and 3% lactic acid +3% acetic acid. After treatments, half of the fruits were rinsed with water while another half were not rinsed. Non-inoculated grape tomatoes for quality analysis were treated with the same solutions with and without subsequent water rinse. Results demonstrated that the acid combinations reduced populations of Salmonella enterica on the stem scar area of grape tomatoes by 1.52-1.90 log CFU/fruit, compared with the non-treated control while water wash and rinse removed the bacterium by only 0.23-0.30 log CFU/fruit. On the stem scar of large round tomatoes, the same acid treatments achieved 3.54 log CFU/fruit reduction of the pathogen. The varying response to the acid washes between grape and large round tomatoes seems to be related to the differences in surface characteristics of stem scar areas observed with SEM. Rinsing with water after acid combination treatments did not significantly affect the efficacy of the treatments in either grape or large round tomatoes. Acidic off-odor was detected on fruits treated with acid combination without water rinse 1 day after treatment while water rinse eliminated the off-odor. The acid treatments with and without water rinse did not consistently affect appearance, color, firmness, or lycopene or ascorbic acid contents of tomatoes during 21-days storage at 10 °C. Considering the similarity in antimicrobial efficacy between the fruits with and without water rinse following acid treatments, and the elimination of acidic odor by water rinse, fruits should be rinsed with water after acid treatments. Overall, our results demonstrated that the acids were more effective in inactivating Salmonella on large round tomatoes than on grape tomatoes, and water rinses following acid treatments eliminated the acidic odor without affecting the efficacy of the acids against Salmonella. Published by Elsevier B.V.
Bohaychuk, Valerie M.; Checkley, Sylvia L.; Gensler, Gary E.; Barrios, Pablo Romero
2009-01-01
Studies to determine baseline levels of microbial contaminants and foodborne bacterial pathogens are needed to evaluate the effectiveness of Hazard Analysis Critical Control Point (HACCP) programs, Good Manufacturing/Production Practices, and various interventions. In 2004 and 2005 poultry carcass rinses from provincially inspected abattoirs in Alberta, Canada, were tested to determine the levels of aerobic plate count bacteria, coliform bacteria, and generic Escherichia coli, the prevalence and levels of Campylobacter spp., and the prevalence of Salmonella spp. and Shiga toxin-producing E. coli (STEC). Samples were collected from 3 high volume and 62 low volume abbatoirs. All samples (1296) were positive for aerobic plate count bacteria, with 98.8% of samples having counts of 100 000 or less colony forming units (CFU)/cm2. Coliform bacteria were isolated from 99.7% of the 1296 carcasses and were recovered at levels of ≤ 1000 CFU/cm2 for 98.3% of the samples. Generic E. coli were recovered from 99.1% of the 1296 carcasses at levels of ≤ 1000 CFU/cm2 for 98.6% of the samples. Seventy five percent of 1234 samples that were tested for Campylobacter were positive; 37.5% of 1295 samples that were tested for Salmonella were positive; and only 2 of 1296 samples tested for STEC were positive (0.15%). PMID:19412397
The Influence of Serial Carbohydrate Mouth Rinsing on Power Output during a Cycle Sprint.
Phillips, Shaun M; Findlay, Scott; Kavaliauskas, Mykolas; Grant, Marie Clare
2014-05-01
The objective of the study was to investigate the influence of serial administration of a carbohydrate (CHO) mouth rinse on performance, metabolic and perceptual responses during a cycle sprint. Twelve physically active males (mean (± SD) age: 23.1 (3.0) years, height: 1.83 (0.07) m, body mass (BM): 86.3 (13.5) kg) completed the following mouth rinse trials in a randomized, counterbalanced, double-blind fashion; 1. 8 x 5 second rinses with a 25 ml CHO (6% w/v maltodextrin) solution, 2. 8 x 5 second rinses with a 25 ml placebo (PLA) solution. Following mouth rinse administration, participants completed a 30 second sprint on a cycle ergometer against a 0.075 g·kg(-1) BM resistance. Eight participants achieved a greater peak power output (PPO) in the CHO trial, resulting in a significantly greater PPO compared with PLA (13.51 ± 2.19 vs. 13.20 ± 2.14 W·kg(-1), p < 0.05). Magnitude inference analysis reported a likely benefit (81% likelihood) of the CHO mouth rinse on PPO. In the CHO trial, mean power output (MPO) showed a trend for being greater in the first 5 seconds of the sprint and lower for the remainder of the sprint compared with the PLA trial (p > 0.05). No significant between-trials difference was reported for fatigue index, perceived exertion, arousal and nausea levels, or blood lactate and glucose concentrations. Serial administration of a CHO mouth rinse may significantly improve PPO during a cycle sprint. This improvement appears confined to the first 5 seconds of the sprint, and may come at a greater relative cost for the remainder of the sprint. Key pointsThe paper demonstrates that repeated administration of a carbohydrate mouth rinse can significantly improve peak power output during a single 30 second cycle sprint.The ergogenic effect of the carbohydrate mouth rinse may relate to the duration of exposure of the oral cavity to the mouth rinse, and associated greater stimulation of oral carbohydrate receptors.The significant increase in peak power output with the carbohydrate mouth rinse may come at a relative cost for the remainder of the sprint, evidenced by non-significantly lower mean power output and a greater fatigue index in the carbohydrate vs. placebo trial.Serial administration of a carbohydrate mouth rinse may be beneficial for sprint athletes as a method of performance enhancement that minimizes the risk of performance decrement through body mass increase and gastrointestinal disturbances associated with ingesting carbohydrate solutions.
Erovic Ademovski, Seida; Mårtensson, Carina; Persson, Gösta Rutger; Renvert, Stefan
2017-10-01
To evaluate the long-term effects of a zinc acetate and chlorhexidine diacetate mouth rinse (Zn/CHX) on intra-oral halitosis. Forty-six adults with intra-oral halitosis were randomized into a 6-month, double-blind, placebo-controlled clinical study. The presence of intra-oral halitosis was evaluated at baseline, 3 and 6 months after treatment by assessment of organoleptic score (OLS) and by total volatile sulphur compounds (T-VSC), hydrogen sulphide (H 2 S) and methyl mercaptan (MM) concentrations in exhaled air. A Zn/CHX mouth rinse provided significantly better control of intra-oral halitosis than a placebo mouth rinse. At 3 and 6 months, individuals rinsing with the Zn/CHX rinse presented with reductions of the OLS, T-VSC (p < .01, respectively), H 2 S (p < .001), and MM (p < .01) in subjects' exhaled air. At 6 months, 68.2% of individuals using the Zn/CHX rinse experienced a 1 or 2 category improvement in OLS compared with 19.1% of placebo-treated subjects. 91% of subjects in the Zn/CHX group were categorized as being effectively treated for intra-oral halitosis (i.e. H 2 S < 112 ppb), compared to 43% in the placebo group. Zn/CHX mouth rinse provides effective long-term efficacy against intra-oral halitosis, assessed both objectively and subjectively. With regular rinsing, the effect was sustained for 6 months. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Songsiripradubboon, Siriporn; Hamba, Hidenori; Trairatvorakul, Chutima; Tagami, Junji
2014-03-01
To investigate the remineralizing effects of fluoride mouthrinses used at different times and frequency in addition to fluoride toothpaste. A randomized crossover single blinded study comprised 4 experimental phases of 21 days each. Twelve orthodontic volunteers were fixed with an orthodontic bracket containing an artificial carious enamel slab, which was from the same tooth in all 4 phases, and were randomly assigned to the following groups: (1) brushing with F toothpaste 2× per day (F- brush), (2) F- brush+rinsing with 0.05% NaF (F- rinse) after lunch, (3) F- brush+F-rinse before bedtime, and (4) F- brush+F- rinse 2× per day. Mean mineral gain after each phase was determined from mineral density profiles obtained using Micro-CT. The mean mineral gain in all treatments with F- brush and F-rinse were significantly greater than those in F- brush (p<0.05). Moreover F- rinse 2× per day increased lesion remineralization more than F- rinse once a day. The twice-daily use of 0.05% NaF mouthrinse combined with twice-daily regular use of fluoride toothpaste resulted in the greatest remineralization of incipient caries. These data indicate that rinsing frequency is a factor affecting the effectiveness of fluoride mouthrinse. The rinsing frequency of NaF mouthrinse, when used with fluoride toothpaste, also affects the remineralization. This finding, if confirmed by a clinical study, would lead to a new recommendation for fluoride mouthrinse used in high caries risk patients who could benefit from using it twice a day. Copyright © 2014 Elsevier Ltd. All rights reserved.
Singh, Payal; Nagpal, Rajni; Singh, Udai Pratap
2017-08-01
This in vitro study evaluated the effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin. Flat coronal dentin surfaces were prepared in 120 extracted human molars. Teeth were randomly divided into 5 groups ( n = 24) according to 5 different surface pre-treatments: No pre-treatment (control); 1M carbodiimide (EDC); 0.1% epigallocatechin-3-gallate (EGCG); 2% minocycline (MI); 10% sodium ascorbate (SA). After surface pre-treatment, adhesive (Adper Single Bond 2 [SB], 3M ESPE) was applied. Composite was applied into transparent plastic tubes (2.5 mm in diameter), which was placed over the bonded dentin surface. From each group, 10 samples were subjected to shear bond strength (SBS) evaluation at 24 hours (immediate) and remaining 10 samples were tested after 6 months (delayed). Additionally, 4 samples per group were subjected to scanning electron microscopic analysis for observation of resin-dentin interface. The data were statistically analysed with Shaperio‑Wilk W test, 2-way analysis of variance (ANOVA), and post hoc Tukey's test. At 24 hours, SBS of all surface pre-treatment groups were comparable with the control group, with significant differences found between EDC and SA groups only ( p = 0.009). After 6 months storage, EDC, EGCG, and MI pre-treatments preserved the resin-dentin bond strength with no significant fall. Dentin pre-treatment with all the dentin biomodifiers except SA resulted in significant preservation of resin-dentin bond over 6 months storage period, without negatively affecting the immediate bond strength of the etch and rinse adhesive tested.
The effect of a herbal paste and oil extract on the lipid content of canine hair fibres.
Momota, Yutaka; Shimada, Kenichiro; Kadoya, Chihiro; Gin, Azusa; Kobayashi, Jun; Nakamura, Yuka; Matsubara, Takako; Sako, Toshinori
2017-08-01
Application of herbal paste and oil to a dog's coat and body before rinsing (often combining with shampooing) is a cosmetic therapy available in Japan. It is highly appreciated by users, who claim that the treatment makes the coat shinier, improves volume and eliminates tangles. However, there has been no scientific evaluation of such treatments. Improvement of hair condition is derived from oils such as sebum and conditioning oils because chemicals are not used. Therefore, we examined nonpolar lipids (the primary lipids in dog hair) and the botanical oils used in this therapy. Hair samples were obtained from six beagle dogs. Groups were based on different combinations of the following processes: rinsing, shampooing, herbal therapy and herbal therapy with oil extract. Analysis of lipids was performed by high performance thin layer chromatography. The processes of shampooing and herbal therapy were associated with an equivalent reduction in cholesterol ester and triglyceride (TG). However, hair treated by herbal therapy combined with oil extract had an almost three-fold higher TG content, even after shampooing. This study demonstrated that the herbal therapy was able to coat hair samples with TG that was not removed with rinsing. Further investigation is required to evaluate the possible benefits of the application of botanical products containing lipids, such as TG, on hair coat quality in dogs. © 2017 The Authors. Veterinary Dermatology published by John Wiley & Sons Ltd on behalf of the ESVD and ACVD.
Benthic Flux Sampling Device. Operations, Methods, and Procedures
1993-02-01
nitric acid (HNO3) overnight, then rinse with D.I. water. When in doubt, consult with the chemist for proper cleaning protocols. CHARGE BATTERIES...sis being performed. The system will be flushed with methanol to remove organic com- pounds and with nitric acid to remove metals. The nitric acid ... acid -washed, 500-me Teflon (TFE) sampling bottles aboard the BFSD. After each deployment, blank ferrules are fitted in place of the sampling lines and
The Effectiveness of Propolis on Gingivitis: A Randomized Controlled Trial
Paulino, Niraldo; Nör, Jacques E.; Moreira, Alexandre
2014-01-01
Abstract Background: A randomized, double-blind, controlled clinical trial was conducted to evaluate the effectiveness of a propolis rinse on induced gingivitis by using the co-twin study design. Methods: Twenty-one twin pairs (n=42) were enrolled in a gingivitis study with oral hygiene promotion (14 days) and gingivitis induction (21 days). During the gingivitis induction phase, one member of the twin pair was randomly assigned to a 2% typified propolis rinse, and the other was assigned a color-matched 0.05% sodium fluoride plus 0.05% cetylpyridinium chloride rinse (positive control). Patients rinsed twice daily with 20 mL for 30 seconds for 21 days. Gingivitis was measured on days −14 (baseline), 0 (after hygiene phase), and 21 (after no-hygiene phase) by using the Papillary Bleeding Score (PBS) and by standard digital imaging of the gum tissues (G-parameter). Results: The 38 persons who completed the study (age 13–22 years) were well balanced according to PBS at baseline and G-parameter after the initial hygiene phase. After 21 days without oral hygiene, the propolis rinse and positive control rinse groups did not differ significantly for average PBS measurements or G-parameter. Conclusions: Use of a 2% typified propolis rinse was equivalent to a positive control rinse during a 21-day no-hygiene period. PMID:25380344
Prevalence of Salmonella on retail broiler chicken meat carcasses in Colombia.
Donado-Godoy, Pilar; Clavijo, Viviana; León, Maribel; Tafur, Mc Allister; Gonzales, Sebastian; Hume, Michael; Alali, Walid; Walls, Isabel; Lo Fo Wong, Danilo M A; Doyle, M P
2012-06-01
A cross-sectional study was performed to estimate the prevalence of Salmonella on retail market chicken carcasses in Colombia. A total of 1,003 broiler chicken carcasses from 23 departments (one city per department) were collected via a stratified sampling method. Carcass rinses were tested for the presence of Salmonella by conventional culture methods. Salmonella strains were isolated from 27 % of the carcasses sampled. Logistic regression analysis was used to determine potential risk factors for Salmonella contamination associated with the chicken production system (conventional versus free-range), storage condition (chilled versus frozen), retail store type (supermarket, independent, and wet market), poultry company (integrated company versus nonintegrated company), and socioeconomic stratum. Chickens from a nonintegrated poultry company were associated with a significantly (P < 0.05) greater risk of Salmonella contamination (odds ratio, 2.0) than were chickens from an integrated company. Chilled chickens had a significantly (P < 0.05) higher risk of Salmonella contamination (odds ratio, 4.3) than did frozen chicken carcasses.
Awad, Mohamed Moustafa
2017-01-01
Objective: The objective of this study was to assess the resin-dentin interfacial morphology created by two universal adhesives using scanning electron microscopy (SEM). Materials and Methods: The occlusal surfaces of ten (n = 5) molars were reduced to expose a flat surface of dentin. Two universal adhesives, Scotchbond Universal Adhesive and Tetric N-Bond Universal, were independently applied to air-dried dentin. Light-cured resin-based composite restorative materials were used to incrementally build a composite “buildup.” The specimen was sectioned mesiodistally to expose the resin-dentin interface. The inner surfaces of the specimens were polished. Samples were immersed in hydrochloric acid and then rinsed using distilled water. This was followed by immersion of the samples in 1% sodium hypochlorite solution. Then, samples were thoroughly rinsing with distilled water. Dehydration of samples was performed using ascending concentration of ethyl alcohol. Prepared samples were observed SEM at magnifications ×1500 and x4000. Results: Both universal adhesives could penetrate dentin-forming well-defined resin tags, lateral branches as well as a uniform hybrid layer. Conclusions: Two tested universal adhesives applied in self-etch mode can infiltrate into dentin-producing high-quality interfacial morphology. Similar interfacial morphology may be due to the similarity in composition and application mode. PMID:28729794
Code of Federal Regulations, 2011 CFR
2011-04-01
... concentration specified in the monograph. (l) Treatment rinse effervescent tablets. A fluoride treatment rinse... result in the appropriate fluoride concentration specified in the monograph. (m) Treatment rinse powder... before using to result in the appropriate fluoride concentration specified in the monograph. [60 FR 52507...
Comparison of Antemortem and Environmental Samples for Zebrafish Health Monitoring and Quarantine.
Crim, Marcus J; Lawrence, Christian; Livingston, Robert S; Rakitin, Andrei; Hurley, Shane J; Riley, Lela K
2017-07-01
Molecular diagnostic assays offer both exquisite sensitivity and the ability to test a wide variety of sample types. Various types of environmental sample, such as detritus and concentrated water, might provide a useful adjunct to sentinels in routine zebrafish health monitoring. Similarly, antemortem sampling would be advantageous for expediting zebrafish quarantine, without euthanasia of valuable fish. We evaluated the detection of Mycobacterium chelonae, M. fortuitum, M. peregrinum, Pseudocapillaria tomentosa, and Pseudoloma neurophilia in zebrafish, detritus, pooled feces, and filter membranes after filtration of 1000-, 500-, and 150-mL water samples by real-time PCR analysis. Sensitivity varied according to sample type and pathogen, and environmental sampling was significantly more sensitive than zebrafish sampling for detecting Mycobacterium spp. but not for Pseudocapillaria neurophilia or Pseudoloma tomentosa. The results of these experiments provide strong evidence of the utility of multiple sample types for detecting pathogens according to each pathogen's life cycle and ecological niche within zebrafish systems. In a separate experiment, zebrafish subclinically infected with M. chelonae, M. marinum, Pleistophora hyphessobryconis, Pseudocapillaria tomentosa, or Pseudoloma neurophilia were pair-spawned and individually tested with subsets of embryos from each clutch that received no rinse, a fluidizing rinse, or were surface-disinfected with sodium hypochlorite. Frequently, one or both parents were subclinically infected with pathogen(s) that were not detected in any embryo subset. Therefore, negative results from embryo samples may not reflect the health status of the parent zebrafish.
Comparison of Antemortem and Environmental Samples for Zebrafish Health Monitoring and Quarantine
Crim, Marcus J; Lawrence, Christian; Livingston, Robert S; Rakitin, Andrei; Hurley, Shane J; Riley, Lela K
2017-01-01
Molecular diagnostic assays offer both exquisite sensitivity and the ability to test a wide variety of sample types. Various types of environmental sample, such as detritus and concentrated water, might provide a useful adjunct to sentinels in routine zebrafish health monitoring. Similarly, antemortem sampling would be advantageous for expediting zebrafish quarantine, without euthanasia of valuable fish. We evaluated the detection of Mycobacterium chelonae, M. fortuitum, M. peregrinum, Pseudocapillaria tomentosa, and Pseudoloma neurophilia in zebrafish, detritus, pooled feces, and filter membranes after filtration of 1000-, 500-, and 150-mL water samples by real-time PCR analysis. Sensitivity varied according to sample type and pathogen, and environmental sampling was significantly more sensitive than zebrafish sampling for detecting Mycobacterium spp. but not for Pseudocapillaria neurophilia or Pseudoloma tomentosa. The results of these experiments provide strong evidence of the utility of multiple sample types for detecting pathogens according to each pathogen's life cycle and ecological niche within zebrafish systems. In a separate experiment, zebrafish subclinically infected with M. chelonae, M. marinum, Pleistophora hyphessobryconis, Pseudocapillaria tomentosa, or Pseudoloma neurophilia were pair-spawned and individually tested with subsets of embryos from each clutch that received no rinse, a fluidizing rinse, or were surface-disinfected with sodium hypochlorite. Frequently, one or both parents were subclinically infected with pathogen(s) that were not detected in any embryo subset. Therefore, negative results from embryo samples may not reflect the health status of the parent zebrafish. PMID:28724491
Clarke, Neil D; Kornilios, Evangelos; Richardson, Darren L
2015-10-01
Oral carbohydrate (CHO) rinsing has beneficial effects on endurance performance and caffeine (CAF) mouth rinsing either independently or in conjunction with CHO may enhance sprinting performance. However, the effects of CHO and CAF mouth rinses on resistance exercise have not been examined previously. The purpose of this study was to investigate the effects of CHO and CAF rinsing on maximum strength and muscular endurance performance. Fifteen recreationally resistance-trained males completed an exercise protocol, which involved a 1 repetition maximum (RM) bench press followed by 60% of their 1RM to failure in a double-blind, randomized, counterbalanced crossover design. Before exercise, 25 ml of a 6% (15 g; 0.20 ± 0.02 g·kg(-1)) CHO, 1.2% (300 mg; 3.9 ± 0.3 mg·kg(-1)) CAF, carbohydrate with caffeine (C + C) solutions, or water (placebo; PLA) were rinsed for 10 seconds. During the remaining session, no solution was rinsed (control; CON). All solutions were flavored with (200 mg) sucralose. Felt arousal was recorded pre- and post-rinse, and rating of perceived exertion (RPE) was recorded immediately after the repetitions to failure. There were no significant differences in 1RM (p = 0.808; ηp(2)= 0.02), the number of repetitions performed (p = 0.682; ηp(2)= 0.03), or the total exercise volume (p = 0.482; ηp(2)= 0.03) between conditions. Rating of perceived exertion was similar for all trials (p = 0.330; ηp(2)= 0.08), whereas Felt arousal increased as a consequence of rinsing (p = 0.001; ηp(2)= 0.58), but was not different between trials (p = 0.335; ηp(2)= 0.08). These results suggest that rinsing with a CHO and CAF solution either independently or combined has no significant effect on maximum strength or muscular endurance performance.
Bhate, Devaki; Jain, Sanjay; Kale, Rahul; Muglikar, Sangeeta
2015-01-01
Background: Chlorhexidine (CHX) is considered as a gold standard of antimicrobial rinses. Various herbal oral rinses are available in the market. However, little is known of its effectiveness. Aim: The aim of this study was to evaluate the clinical changes after the usage of herbal oral rinse and 0.12% CHX. Materials and Methods: In a randomized clinical trial, 76 patients with dental plaque-induced gingivitis were assigned to Group I (Herbal Oral Rinse - Hiora®) and 76 patients with dental plaque-induced gingivitis to Group II (0.12% Chlorhexidine-Peridex®). Gingival index and Plaque index scores were recorded at baseline and 21 days after scaling. Results: Intragroup comparison in both groups showed that plaque index and gingival index scores were statistically significant after 21 days as compared to baseline. Intergroup comparison showed that plaque index scores and gingival index scores were statistically significant in Group II as compared to Group I. Conclusion: When herbal oral rinse was compared to 0.12% CHX, 0.12% CHX mouth rinse effectively reduced the clinical symptoms of plaque-induced gingivitis. PMID:26392686
Whitman, R.L.; Przybyla-Kelly, K.; Shively, D.A.; Nevers, M.B.; Byappanahalli, M.N.
2009-01-01
Beach sand contains fecal indicator bacteria, often in densities greatly exceeding the adjacent swimming waters. We examined the transferability of Escherichia coli and F+ coliphage (MS2) from beach sand to hands in order to estimate the potential subsequent health risk. Sand with high initial E. coli concentrations was collected from a Chicago beach. Individuals manipulated the sand for 60 seconds, and rinse water was analysed for E. coli and coliphage. E. coli densities transferred were correlated with density in sand rather than surface area of an individual's hand, and the amount of coliphage transferred from seeded sand was different among individuals. In sequential rinsing, percentage reduction was 92% for E. coli and 98% for coliphage. Using dose-response estimates developed for swimming water, it was determined that the number of individuals per thousand that would develop gastrointestinal symptoms would be 11 if all E. coli on the fingertip were ingested or 33 if all E. coli on the hand were ingested. These results suggest that beach sand may be an important medium for microbial exposure; bacteria transfer is related to initial concentration in the sand; and rinsing may be effective in limiting oral exposure to sand-borne microbes of human concern.
Türkoğlu, Oya; Becerik, Sema; Tervahartiala, Taina; Sorsa, Timo; Atilla, Gül; Emingil, Gülnur
2014-05-20
The aim of the present study was to evaluate the effect of adjunctive chlorhexidine (CHX) mouthrinse on gingival crevicular fluid (GCF) MMP-8 and TIMP-1 levels in plaque-associated gingivitis. A total of 50 gingivitis patients were included in the present study. In addition to daily plaque control, CHX group rinsed with CHX, while placebo group rinsed with placebo mouthrinse for 4 weeks. GCF samples were collected, and clinical parameters including plaque index, papillary bleeding index, calculus index and pocket depth were recorded at baseline and 4 weeks. GCF MMP-8 and TIMP-1 levels were determined by immunofluorometric assay (IFMA) and enzyme-linked immunosorbent assay (ELISA), respectively. In both groups, GCF MMP-8 levels of anterior and posterior sites at four weeks were not different from baseline (p > 0.05). There were no significant differences in GCF MMP-8 levels between the study groups at four weeks (p > 0.05). GCF TIMP-1 levels of anterior and posterior sites at four weeks were higher compared to baseline in both groups (p < 0.05). There was no significant difference in GCF TIMP level between the study groups at four weeks (p > 0.05). CHX usage had no significant effects on the GCF MMP-8 and TIMP-1 levels in plaque-associate gingivitis. However, daily plaque control resulted in the increase of GCF TIMP-1 levels regardless of CHX usage.
2014-01-01
Background The aim of the present study was to evaluate the effect of adjunctive chlorhexidine (CHX) mouthrinse on gingival crevicular fluid (GCF) MMP-8 and TIMP-1 levels in plaque-associated gingivitis. Methods A total of 50 gingivitis patients were included in the present study. In addition to daily plaque control, CHX group rinsed with CHX, while placebo group rinsed with placebo mouthrinse for 4 weeks. GCF samples were collected, and clinical parameters including plaque index, papillary bleeding index, calculus index and pocket depth were recorded at baseline and 4 weeks. GCF MMP-8 and TIMP-1 levels were determined by immunofluorometric assay (IFMA) and enzyme-linked immunosorbent assay (ELISA), respectively. Results In both groups, GCF MMP-8 levels of anterior and posterior sites at four weeks were not different from baseline (p > 0.05). There were no significant differences in GCF MMP-8 levels between the study groups at four weeks (p > 0.05). GCF TIMP-1 levels of anterior and posterior sites at four weeks were higher compared to baseline in both groups (p < 0.05). There was no significant difference in GCF TIMP level between the study groups at four weeks (p > 0.05). Conclusions CHX usage had no significant effects on the GCF MMP-8 and TIMP-1 levels in plaque-associate gingivitis. However, daily plaque control resulted in the increase of GCF TIMP-1 levels regardless of CHX usage. PMID:24886536
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hall, R.M.; Sheehy, J.W.
1992-12-01
A walk through survey was made of the furniture stripping process at Jet Strip (SIC-7641), Boulder, Colorado to examine the effectiveness of a unique, enclosed, automated furniture stripping spray system which featured a gasket sealed lid which was in place while furniture was being stripped. Stripping was performed continuously throughout the workday. The enclosed spray system tank was 6 feet wide, 10 feet long and 4.5 feet deep. Furniture to be stripped was placed on a metal grid hung from the top of the enclosed spray system. The rack was lowered into the tank and the lip dropped to formmore » the cover of the enclosed system. A hole in the lid was connected to a water bed mattress which lays on top of the lip. During the stripping process, vapors were emitted through the hole, causing the mattress to expand. At the completion of the stripping process the vapors slowly dissipated into the tank, leaving the mattress in its original form. A single personal sample collected during the stripping and rinsing operations showed a methylene-chloride concentration of 68 parts per million (ppm). If the rinse area were also controlled, the enclosed system could keep the concentration below the 25ppm level. The system was homemade and not commercially available. The authors conclude that the system, while apparently effective, was also expensive. It is not recommended for further study at this time.« less
Kaushik, Mamta; Reddy, Pallavi; Sharma, Roshni; Udameshi, Pooja; Mehra, Neha; Marwaha, Aditya
2016-01-01
Oil pulling is an age-old practice that has gained modern popularity in promoting oral and systemic health. The scientific verification for this practice is insufficient. Thus, this study evaluated the effect of coconut oil pulling on the count of Streptococcus mutans in saliva and to compare its efficacy with that of Chlorhexidine mouthwash: in vivo. The null hypothesis was that coconut oil pulling has no effect on the bacterial count in saliva. A randomized controlled study was planned and 60 subjects were selected. The subjects were divided into three groups, Group A: Oil pulling, Group B: Chlorhexidine, and Group C: Distilled water. Group A subjects rinsed mouth with 10 ml of coconut oil for 10 minutes. Group B subjects rinsed mouth with 5 ml Chlorhexidine mouthwash for 1 minute and Group C with 5 ml distilled water for 1 minute in the morning before brushing. Saliva samples were collected and cultured on 1st day and after 2 weeks from all subjects. Colonies were counted to compare the efficacy of coconut oil and Chlorhexidine with distilled water. Statistically significant reduction in S. mutans count was seen in both the coconut oil pulling and Chlorhexidine group. Oil pulling can be explored as a safe and effective alternative to Chlorhexidine. Edible oil-pulling therapy is natural, safe and has no side effects. Hence, it can be considered as a preventive therapy at home to maintain oral hygiene.
Luby, Stephen P; Kadir, Mohammad Abdul; Yushuf Sharker, M A; Yeasmin, Farzana; Unicomb, Leanne; Sirajul Islam, M
2010-12-01
To pilot two intensive hand hygiene promotion interventions, one using soap and one using a waterless hand sanitizer, in low-income housing compounds in Dhaka, Bangladesh and assess subsequent changes in handwashing behaviour and hand microbiology. Fieldworkers randomized 30 housing compounds: 10 received handwashing promotion with free soap, 10 received handwashing promotion with free waterless hand sanitizer and 10 were non-intervention controls. Fieldworkers assessed handwashing behaviour by structured observation and collected hand rinse specimens. At baseline, compound residents washed their hands with soap 26% of the time after defecation and 30% after cleaning a child's anus but <1% at other times. Compared with baseline, residents of soap intervention compounds were much more likely to wash their hands with soap after faecal contact (85-91%), before preparing food (26%) and before eating (26%). Compounds that received waterless hand sanitizer cleansed their hands more commonly than control compounds that used soap (10.4%vs. 2.3%), but less commonly than soap intervention compounds used soap (25%). Post-intervention hand rinse samples from soap and sanitizer compounds had lower concentrations of faecal indicator bacteria compared with baseline and control compounds. Waterless hand sanitizer was readily adopted by this low-income community and reduced hand contamination but did not improve the frequency of handwashing compared with soap. Future deployments of waterless hand sanitizers may improve hand hygiene more effectively by targeting settings where soap and water is unavailable. © 2010 Blackwell Publishing Ltd.
Gupta, Nimisha; Tripathi, Abhay Mani; Saha, Sonali; Dhinsa, Kavita; Garg, Aarti
2015-07-01
Newer development of bonding agents have gained a better understanding of factors affecting adhesion of interface between composite and dentin surface to improve longevity of restorations. The present study evaluated the influence of salivary contamination on the tensile bond strength of different generation adhesive systems (two-step etch-and-rinse, two-step self-etch and one-step self-etch) during different bonding stages to dentin where isolation is not maintained. Superficial dentin surfaces of 90 extracted human molars were randomly divided into three study Groups (Group A: Two-step etch-and-rinse adhesive system; Group B: Two-step self-etch adhesive system and Group C: One-step self-etch adhesive system) according to the different generation of adhesives used. According to treatment conditions in different bonding steps, each Group was further divided into three Subgroups containing ten teeth in each. After adhesive application, resin composite blocks were built on dentin and light cured subsequently. The teeth were then stored in water for 24 hours before sending for testing of tensile bond strength by Universal Testing Machine. The collected data were then statistically analysed using one-way ANOVA and Tukey HSD test. One-step self-etch adhesive system revealed maximum mean tensile bond strength followed in descending order by Two-step self-etch adhesive system and Two-step etch-and-rinse adhesive system both in uncontaminated and saliva contaminated conditions respectively. Unlike One-step self-etch adhesive system, saliva contamination could reduce tensile bond strength of the two-step self-etch and two-step etch-and-rinse adhesive system. Furthermore, the step of bonding procedures and the type of adhesive seems to be effective on the bond strength of adhesives contaminated with saliva.
Oliveira, Jbs; Sarlo, R S; Bresciani, E; Caneppele, Tmf
The aim of this study was to compare the effectiveness of whitening mouth rinses on teeth previously whitened or not, exposed to food dyes. One hundred twenty enamel-dentin specimens, 3 mm in diameter, were obtained from bovine incisors. The specimens were stained for 14 days in staining broth. After staining, the initial color reading was performed via a spectrophotometer CM-2600d (Konica Minolta). Half of specimens were submitted to whitening (10% carbamide peroxide [CP]) for 14 days. They were then divided into three groups and were submitted to cycles of staining (five minutes) and mouth rinses (two minutes) for 12 weeks, with the following: CP-LI, Listerine Whitening; CP-PL, Plax Whitening; CP-BP, bromelain + papain; CP-DW, deionized water. LI, PL, BP, and DW groups were submitted to the same cited cycles but with no prior bleaching. The color measurements were performed after four, eight, and 12 weeks of treatment with mouth rinses. Data were submitted to repeated measures analysis of variance (ANOVA) and Tukey's test for multiple comparisons, with significance level at 5%. The results showed that the CP-LI, CP-PL, LI, and PL groups had greater color change than did the others. The CP-BP and BP groups were similar to CP-DW and DW. We therefore conclude that Listerine Whitening mouth rinse presented the highest bleaching effect, followed by Plax Whitening mouth rinse. Both maintained CP bleaching effect after 12 weeks of dye-rinse cycles. However, none of these rinses were able to produce whitening similar to CP. Bromelain- and papain-containing mouth rinses did not show bleaching effect, being similar to the control groups.
Effects of caffeine and carbohydrate mouth rinses on repeated sprint performance.
Beaven, C Martyn; Maulder, Peter; Pooley, Adrian; Kilduff, Liam; Cook, Christian
2013-06-01
Our purpose was to examine the effectiveness of carbohydrate and caffeine mouth rinses in enhancing repeated sprint ability. Previously, studies have shown that a carbohydrate mouth rinse (without ingestion) has beneficial effects on endurance performance that are related to changes in brain activity. Caffeine ingestion has also demonstrated positive effects on sprint performance. However, the effects of carbohydrate or caffeine mouth rinses on intermittent sprints have not been examined previously. Twelve males performed 5 × 6-s sprints interspersed with 24 s of active recovery on a cycle ergometer. Twenty-five milliliters of either a noncaloric placebo, a 6% glucose, or a 1.2% caffeine solution was rinsed in the mouth for 5 s prior to each sprint in a double-blinded and balanced cross-over design. Postexercise maximal heart rate and perceived exertion were recorded, along with power measures. A second experiment compared a combined caffeine-carbohydrate rinse with carbohydrate only. Compared with the placebo mouth rinse, carbohydrate substantially increased peak power in sprint 1 (22.1 ± 19.5 W; Cohen's effect size (ES), 0.81), and both caffeine (26.9 ± 26.9 W; ES, 0.71) and carbohydrate (39.1 ± 25.8 W; ES, 1.08) improved mean power in sprint 1. Experiment 2 demonstrated that a combination of caffeine and carbohydrate improved sprint 1 power production compared with carbohydrate alone (36.0 ± 37.3 W; ES, 0.81). We conclude that carbohydrate and (or) caffeine mouth rinses may rapidly enhance power production, which could have benefits for specific short sprint exercise performance. The ability of a mouth-rinse intervention to rapidly improve maximal exercise performance in the absence of fatigue suggests a central mechanism.
After-rinsing hair growth promotion of minoxidil-containing amino alpha-cyclodextrins.
Kim, Jin-Chul; Kim, Myoung-Dong
2007-12-01
Triamino alpha-cyclodextrin (CD) was synthesized and the inclusion complex with Minoxidil (MXD) was prepared. alpha-CD was azidated by modifying the 6-hydroxylmethyl CD rim with sodium azide. Then, mono-, di-, tri-, and tetra-azidocyclodextrins were separated by a flash column chromatography and reduced to the corresponding amines by hydrogenation with Pd/C. The substantivities of MXD included in either 2-hydroxypropyl alpha-CD (HP alpha-CD) or triamino alpha-CD were evaluated in vitro using hairless mice skins. After applying the preparations onto the skin and rinsing it, the amount of the drug left on the skin was determined using high-performance liquid chromatography (HPLC). It was the highest when the drug was included in triamino alpha-CD. The electrostatic interaction between the protonated amino CD and the negatively charged skin would be responsible for the relatively high substantivity. The in vivo hair growth promotion effect of each preparation was investigated, where the sample application onto the clipped backs of female mice (C57BL6) and the subsequent rinsing of the backs were done once a day for 30 days. Only MXD in triamino alpha-CD had hair growth promotion effect, possibly due to the significant substantivity.
USDA-ARS?s Scientific Manuscript database
A rapid method for extracting eriophyoid mites was adapted from previous studies to provide growers and IPM consultants with a practical, efficient, and reliable tool to monitor for rust mites in vineyards. The rinse in bag (RIB) method allows quick extraction of mites from collected plant parts (sh...
The oral microflora in obesity and type-2 diabetes
Shillitoe, Edward; Weinstock, Ruth; Kim, Taewan; Simon, Howard; Planer, Jessica; Noonan, Susan; Cooney, Robert
2012-01-01
Background Type 2 diabetes mellitus (T2DM) is prevalent in people with obesity. It has been proposed that these conditions are related to specific features of the microflora of the mouth and lower gastrointestinal (GI) tract. Hyperglycemia often resolves quickly after Roux-en-Y gastric bypass (RYGB) but the role of the GI microflora cannot be examined easily because of reduced intestinal mobility. We propose that the study of microorganisms present in the mouth of patients undergoing RYGB will contribute to our understanding of the role of bacteria in the pathogenesis of T2DM. Objective To conduct a feasibility study to examine differences in oral microbes in obese patients with and without T2DM and to determine whether it is feasible to measure changes after gastric bypass surgery. Methods Individuals with morbid obesity (n=29), of whom 13 had T2DM, were studied. Oral rinses, stool samples, and blood samples were obtained before RYGB, and oral rinses and blood samples were obtained at 2 and 12 weeks postsurgery. Results Prior to surgery, participants with T2DM had slightly higher total levels of oral bacteria than those without diabetes. Those with HbA1c > 6.5% had rather lower levels of Bifidobacteria in the mouth and stool. At 2 weeks post-RYGB, patients with T2DM were able to reduce or discontinue their hypoglycemic medications. Stool samples could not be obtained but oral rinses were readily available. The levels of oral Bifidobacteria had increased tenfold and levels of circulating endotoxin and tumor necrosis factor-alpha had decreased. Conclusions The study of oral bacteria before and after RYGB is feasible and should be tested in larger patient populations to increase our understanding of the role of microorganisms in the pathogenesis of obesity and T2DM. PMID:23119124
Optimal design of zero-water discharge rinsing systems.
Thöming, Jorg
2002-03-01
This paper is about zero liquid discharge in processes that use water for rinsing. Emphasis was given to those systems that contaminate process water with valuable process liquor and compounds. The approach involved the synthesis of optimal rinsing and recycling networks (RRN) that had a priori excluded water discharge. The total annualized costs of the RRN were minimized by the use of a mixed-integer nonlinear program (MINLP). This MINLP was based on a hyperstructure of the RRN and contained eight counterflow rinsing stages and three regenerator units: electrodialysis, reverse osmosis, and ion exchange columns. A "large-scale nickel plating process" case study showed that by means of zero-water discharge and optimized rinsing the total waste could be reduced by 90.4% at a revenue of $448,000/yr. Furthermore, with the optimized RRN, the rinsing performance can be improved significantly at a low-cost increase. In all the cases, the amount of valuable compounds reclaimed was above 99%.
Ethanol wet-bonding technique sensitivity assessed by AFM.
Osorio, E; Toledano, M; Aguilera, F S; Tay, F R; Osorio, R
2010-11-01
In ethanol wet bonding, water is replaced by ethanol to maintain dehydrated collagen matrices in an extended state to facilitate resin infiltration. Since short ethanol dehydration protocols may be ineffective, this study tested the null hypothesis that there are no differences in ethanol dehydration protocols for maintaining the surface roughness, fibril diameter, and interfibrillar spaces of acid-etched dentin. Polished human dentin surfaces were etched with phosphoric acid and water-rinsed. Tested protocols were: (1) water-rinse (control); (2) 100% ethanol-rinse (1-min); (3) 100% ethanol-rinse (5-min); and (4) progressive ethanol replacement (50-100%). Surface roughness, fibril diameter, and interfibrillar spaces were determined with atomic force microscopy and analyzed by one-way analysis of variance and the Student-Newman-Keuls test (α = 0.05). Dentin roughness and fibril diameter significantly decreased when 100% ethanol (1-5 min) was used for rinsing (p < 0.001). Absolute ethanol produced collapse and shrinkage of collagen fibrils. Ascending ethanol concentrations did not collapse the matrix and shrank the fibrils less than absolute ethanol-rinses.
Quintas, Victor; Prada-López, Isabel; Carreira, María J.; Suárez-Quintanilla, David; Balsa-Castro, Carlos; Tomás, Inmaculada
2017-01-01
Currently, there is little evidence on the in situ antibacterial activity of essential oils (EO) without alcohol. This study aimed to evaluate in situ the substantivity and antiplaque effect on the plaque-like biofilm (PL-biofilm) of two solutions, a traditional formulation that contains EO with alcohol (T-EO) and an alcohol-free formulation of EO (Af-EO). Eighteen healthy adults performed a single mouthwash of: T-EO, Af-EO, and sterile water (WATER) after wearing an individualized disk-holding splint for 2 days. The bacterial viability (BV) and thickness of the PL-biofilm were quantified at baseline, 30 s, and 1, 3, 5, and 7 h post-rinsing (Test 1). Subsequently, each volunteer wore the splint for 4 days, applying two daily mouthwashes of: T-EO, Af-EO, and WATER. The BV, thickness, and covering grade (CG) of the PL-biofilm were quantified (Test 2). Samples were analyzed by confocal laser scanning microscopy after staining with the LIVE/DEAD® BacLight™ solution. To conduct the computations of the BV automatically, a Matlab toolbox called Dentius Biofilm was developed. In test 1, both EO antiseptics had a similar antibacterial effect, reducing BV after a single rinse compared to the WATER, and keeping it below baseline levels up to 7 h post-rinse (P < 0.001). The mean thickness of the PL-biofilm after rinsing was not affected by any of the EO formulations and ranged from 18.58 to 20.19 μm. After 4 days, the T-EO and Af-EO solutions were significantly more effective than the WATER, reducing the BV, thickness, and CG of the PL-biofilm (P < 0.001). Although, both EO antiseptics presented a similar bactericidal activity, the Af-EO rinses led to more significant reductions in the thickness and CG of the PL-biofilm than the T-EO rinses (thickness = 7.90 vs. 9.92 μm, P = 0.012; CG = 33.36 vs. 46.61%, P = 0.001). In conclusion, both essential oils antiseptics had very high immediate antibacterial activity and substantivity in situ on the 2-day PL-biofilm after a single mouthwash. In the 4-day PL-biofilm, both essential oils formulations demonstrated a very good antiplaque effect in situ, although the alcohol-free formula performed better at reducing the biofilm thickness and covering grade. PMID:29218030
NASA Technical Reports Server (NTRS)
Spencer, Maegan K.; Liu, De-Ling; Kanik, Isik; Beegle, Luther
2010-01-01
Because salt and metals can mask the signature of a variety of organic molecules (like amino acids) in any given sample, an automated system to purify complex field samples has been created for the analytical techniques of electrospray ionization/ mass spectroscopy (ESI/MS), capillary electrophoresis (CE), and biological assays where unique identification requires at least some processing of complex samples. This development allows for automated sample preparation in the laboratory and analysis of complex samples in the field with multiple types of analytical instruments. Rather than using tedious, exacting protocols for desalting samples by hand, this innovation, called the Automated Sample Processing System (ASPS), takes analytes that have been extracted through high-temperature solvent extraction and introduces them into the desalting column. After 20 minutes, the eluent is produced. This clear liquid can then be directly analyzed by the techniques listed above. The current apparatus including the computer and power supplies is sturdy, has an approximate mass of 10 kg, and a volume of about 20 20 20 cm, and is undergoing further miniaturization. This system currently targets amino acids. For these molecules, a slurry of 1 g cation exchange resin in deionized water is packed into a column of the apparatus. Initial generation of the resin is done by flowing sequentially 2.3 bed volumes of 2N NaOH and 2N HCl (1 mL each) to rinse the resin, followed by .5 mL of deionized water. This makes the pH of the resin near neutral, and eliminates cross sample contamination. Afterward, 2.3 mL of extracted sample is then loaded into the column onto the top of the resin bed. Because the column is packed tightly, the sample can be applied without disturbing the resin bed. This is a vital step needed to ensure that the analytes adhere to the resin. After the sample is drained, oxalic acid (1 mL, pH 1.6-1.8, adjusted with NH4OH) is pumped into the column. Oxalic acid works as a chelating reagent to bring out metal ions, such as calcium and iron, which would otherwise interfere with amino acid analysis. After oxalic acid, 1 mL 0.01 N HCl and 1 mL deionized water is used to sequentially rinse the resin. Finally, the amino acids attached to the resin, and the analytes are eluted using 2.5 M NH4OH (1 mL), and the NH4OH eluent is collected in a vial for analysis.
The efficacy of two oral hygiene regimens in reducing oral malodour: a randomised clinical trial.
Feres, Magda; Figueiredo, Luciene Cristina; Faveri, Marcelo; Guerra, Marcelo C; Mateo, Luis R; Stewart, Bernal; Williams, Malcolm; Panagakos, Foti
2015-12-01
This study compared the efficacy of two oral hygiene regimens in reducing oral malodour and the proportions of bacterial species involved in the production of volatile sulphur compounds. Seventy subjects who participated in a halitosis-induction phase and achieved an organoleptic score of ≥ 3.0 [time point 0 (T0)] randomised into two groups: brushing with regular fluoride toothpaste alone (control group) or brushing with regular fluoride toothpaste followed by rinsing with a 0.075% cetylpyridinium chloride (CPC) mouthwash (CPC group). Subjects followed their assigned oral hygiene regimen for 21 days. Then, they underwent an organoleptic examination and measurement of volatile sulphur compounds (VSCs) using a portable gas chromatograph, 12 hours after their last oral hygiene procedure (T1) and 4 hours after an on-site oral hygiene (T2). Microbiological samples (supragingival biofilm, tongue coating and saliva) were analysed using checkerboard DNA-DNA hybridisation. Both therapies statistically significantly improved the organoleptic scores (P < 0.05), but the VSC levels and/or concentrations were reduced only in the CPC group (P < 0.05). In subjects rinsing with CPC, oral malodour scores were reduced by 49% at the 4-hour assessment (T2) compared with those not rinsing (P < 0.05). Red-complex pathogens were reduced more effectively in the CPC group than in the control group. Brushing followed by rinsing with a 0.075% CPC mouthwash provided statistically significantly greater reductions in oral malodour, measured organoleptically and instrumentally, and in the proportions of red-complex species when compared with brushing alone. © 2015 FDI World Dental Federation.
de Souza, Gustavo Fernandes; Arrais, Ana Beatriz; Aragão, Cícero Flávio Soares; Ferreira, Isana Alvares; Borges, Boniek Castillo Dutra
2018-01-01
To evaluate if physical and mechanical properties of self-curing calcium hydroxide cements were affected by contact with polyacrylic and phosphoric acids. Resin-containing (Life (LF)) and resin-free (Hydro C (HyC)) materials were subjected to polyacrylic acid conditioning and rinsing (POL); phosphoric acid conditioning and rinsing (PHO); rinsing only; and no treatment ( n = 10). Water sorption/solubility, release of hydroxyl ions (pH), roughness (Ra), and impact resistance were evaluated. Additional samples ( n = 1) were prepared for scanning electron microscopy (SEM) analysis of the surface morphology. Data were analyzed by two-way ANOVA and Tukey post hoc test ( P < 0.05). Water sorption was significantly higher for LF when in contact with PHO and lower for POL ( P < 0.05). The mean solubility was higher with POL for both cements ( P < 0.05). PHO increased the mean surface roughness for HyC ( P < 0.01); a significant decrease was noted for LF after contact with both acids ( P < 0.01). PHO promoted lower release of hydroxyl ions on both cements ( P < 0.05). For LF, rinsing, PHO, and POL presented similar morphology, differing from the control group. For HyC, PHO and POL presented similar morphology, differing from the control group. PHO had a negative effect on the physical properties of the cements tested, except for the solubility test. POL affected roughness and solubility of HyC cement. Clinical procedures that require polyacrylic and phosphoric acid conditioning must be done carefully on self-curing calcium hydroxide cements in order to avoid negative impact on their properties.
USDA-ARS?s Scientific Manuscript database
To determine if Campylobacter isolation method influenced antimicrobial susceptibility results, the minimum inhibitory concentrations (MIC) of nine antimicrobials were compared for 291 pairs of Campylobacter isolates recovered from chicken carcass rinse samples using direct plating and an enrichment...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chern, Yann-Cherng; Wu, Hung-Ruei; Chen, Yen-Chu
2015-08-15
A solvent soaking and rinsing method, in which the solvent was allowed to soak all over the surface followed by a spinning for solvent draining, was found to produce perovskite layers with high uniformity on a centimeter scale and with much improved reliability. Besides the enhanced crystallinity and surface morphology due to the rinsing induced surface precipitation that constrains the grain growth underneath in the precursor films, large-area uniformity with film thickness determined exclusively by the rotational speed of rinsing spinning for solvent draining was observed. With chloroform as rinsing solvent, highly uniform and mirror-like perovskite layers of area asmore » large as 8 cm × 8 cm were produced and highly uniform planar perovskite solar cells with power conversion efficiency of 10.6 ± 0.2% as well as much prolonged lifetime were obtained. The high uniformity and reliability observed with this solvent soaking and rinsing method were ascribed to the low viscosity of chloroform as well as its feasibility of mixing with the solvent used in the precursor solution. Moreover, since the surface precipitation forms before the solvent draining, this solvent soaking and rinsing method may be adapted to spinless process and be compatible with large-area and continuous production. With the large-area uniformity and reliability for the resultant perovskite layers, this chloroform soaking and rinsing approach may thus be promising for the mass production and commercialization of large-area perovskite solar cells.« less
A Potential Biofilm Metabolite Signature for Caries Activity - A Pilot Clinical Study
Zandona, F; Soini, HA; Novotny, MV; Santiago, E; Eckert, GJ; Preisser, JS; Benecha, HK; Arthur, RA; Zero, DT
2016-01-01
Background This study's aim was to compare the dental biofilm metabolite-profile of caries-active (N=11) or caries-free (N=4) children by gas chromatography-mass spectrometry (GC/MS) analyses. Methods Samples collected after overnight fasting, with or without a previous glucose rinse, were combined for each child based on the caries status of the site, re-suspended in ethanol and analyzed by GC/MS. Results Biofilm from caries-active sites exhibited a different chromatographic profile compared to caries-free sites. Qualitative and quantitative analysis suggested a special cluster of branched alcohols and esters present at substantially higher intensity in biofilms of caries-active sites. Conclusions This pilot study indicates that there are metabolites present in the biofilm which have the potential to provide a characteristic metabolomics signature for caries activity. PMID:27885354
James, W O; Williams, W O; Prucha, J C; Johnston, R; Christensen, W
1992-01-01
The USDA Food Safety and Inspection Service determined populations of bacteria on poultry during processing at a slaughter plant in Puerto Rico in November and December 1987. The plant was selected because of its management's willingness to support important changes in equipment and processing procedures. The plant was representative of modern slaughter facilities. Eight-hundred samples were collected over 20 consecutive 8-hour days of operation from 5 sites in the processing plant. Results indicated that slaughter, dressing, and chilling practices significantly decreased the bacterial contamination on poultry carcasses, as determined by counts of aerobic bacteria, Enterobacteriaceae, and Escherichia coli. Salmonella was not enumerated; rather, it was determined to be present or absent by culturing almost the entire rinse. The prevalence of Salmonella in the study decreased during evisceration, then increased during immersion chilling.
Mattarozzi, Monica; Manfredi, Edoardo; Lorenzi, Andrea; Smerieri, Arianna; Di Blasio, Alberto; Macaluso, Guido; Lumetti, Simone; Galli, Carlo
2016-05-06
The aim of the present study was to investigate the efficacy of environmental scanning electron microscopy (ESEM), in low vacuum mode (LV-ESEM) and in wet mode (wet-ESEM) in the assessment of cell-material interactions. Mouse calvaria MC3T3 cells (ATCC) were seeded on commercially pure machined titanium discs of 10 mm diameter in Dulbecco modified MEM, 10% Fetal Bovine Serum, 1% Penicillin and Streptomycin and 1% Glutamine. Samples were then processed for microscope observation by rinse in Phosphate Buffer saline and fixation in 4.5% Glutaraldehyde. Samples were then rinsed in Sodium Cacodylate buffer and observed or dehydrated in alcohol prior to LV-ESEM observation. Fresh samples in 0.9% NaCl solution were observed in wet- ESEM. No significant loss of detail was observed when dehydrated or non dehydrated samples were analysed at LV-ESEM.The observation of fresh samples in wet-ESEM however proved difficult for the need to eliminate water which forms a layer covering the sample, thus hiding cell surface details. When reducing the vapor pressure in the chamber, the layer evaporated and NaCl immediately started to precipitate and cells collapsed, thus no further investigation was possible. The use of low vacuum-ESEM after cell fixation, but without dehydration or gold sputter coating proved a viable alternative to traditional high vacuum SEM observation.
Price, E; Weaver, G; Hoffman, P; Jones, M; Gilks, J; O'Brien, V; Ridgway, G
2016-03-01
A variety of methods are in use for decontaminating breast pump milk collection kits and related items associated with infant feeding. This paper aims to provide best practice guidance for decontamination of this equipment at home and in hospital. It has been compiled by a joint Working Group of the Healthcare Infection Society and the Infection Prevention Society. The guidance has been informed by a search of the literature in Medline, the British Nursing Index, the Cumulative Index to Nursing & Allied Health Literature, Midwifery & Infant Care and the results of two surveys of UK neonatal units in 2002/3 and 2006, and of members of the Infection Prevention Society in 2014. Since limited good quality evidence was available from these sources much of the guidance represents good practice based on the consensus view of the Working Group. Breast pump milk collection kits should not be reused by different mothers unless they have been sterilized in a Sterile Services Department between these different users.When used by the same mother, a detergent wash followed by thorough rinsing and drying after each use gives acceptable decontamination for most circumstances, as long as it is performed correctly.Additional decontamination precautions to washing, rinsing and drying may be used if indicated by local risk assessments and on advice from the departmental clinicians and Infection Prevention and Control Teams. The microbiological quality of the rinse water is an important consideration, particularly for infants on neonatal units.If bottle brushes or breast/nipple shields are used, they should be for use by one mother only. Decontamination should be by the processes used for breast pump milk collection kits.Dummies (soothers, pacifiers or comforters) needed for non-nutritive sucking by infants on neonatal units, should be for single infant use. Manufacturers should provide these dummies ready-to-use and individually packaged. They must be discarded at least every 24 hours or immediately if soiled with anything other than the baby's saliva. No attempt should be made to decontaminate the dummies, either before or during use. This guidance provides practical recommendations to support the safe decontamination of breast pump milk collection kits for healthcare professionals to use and communicate to other groups such as parents and carers.
Price, E; Weaver, G; Hoffman, P; Jones, M; Gilks, J; O’Brien, V; Ridgway, G
2015-01-01
Introduction: A variety of methods are in use for decontaminating breast pump milk collection kits and related items associated with infant feeding. This paper aims to provide best practice guidance for decontamination of this equipment at home and in hospital. It has been compiled by a joint Working Group of the Healthcare Infection Society and the Infection Prevention Society. Methods: The guidance has been informed by a search of the literature in Medline, the British Nursing Index, the Cumulative Index to Nursing & Allied Health Literature, Midwifery & Infant Care and the results of two surveys of UK neonatal units in 2002/3 and 2006, and of members of the Infection Prevention Society in 2014. Since limited good quality evidence was available from these sources much of the guidance represents good practice based on the consensus view of the Working Group. Key recommendations: Breast pump milk collection kits should not be reused by different mothers unless they have been sterilized in a Sterile Services Department between these different users. When used by the same mother, a detergent wash followed by thorough rinsing and drying after each use gives acceptable decontamination for most circumstances, as long as it is performed correctly. Additional decontamination precautions to washing, rinsing and drying may be used if indicated by local risk assessments and on advice from the departmental clinicians and Infection Prevention and Control Teams. The microbiological quality of the rinse water is an important consideration, particularly for infants on neonatal units. If bottle brushes or breast/nipple shields are used, they should be for use by one mother only. Decontamination should be by the processes used for breast pump milk collection kits. Dummies (soothers, pacifiers or comforters) needed for non-nutritive sucking by infants on neonatal units, should be for single infant use. Manufacturers should provide these dummies ready-to-use and individually packaged. They must be discarded at least every 24 hours or immediately if soiled with anything other than the baby’s saliva. No attempt should be made to decontaminate the dummies, either before or during use. Conclusion: This guidance provides practical recommendations to support the safe decontamination of breast pump milk collection kits for healthcare professionals to use and communicate to other groups such as parents and carers. PMID:28989455
Katayama, Hiroyuki; Haramoto, Eiji; Oguma, Kumiko; Yamashita, Hiromasa; Tajima, Atsushi; Nakajima, Hideichiro; Ohgaki, Shinichiro
2008-03-01
Sewerage systems are important nodes to monitor human enteric pathogens transmitted via water. A quantitative virus survey was performed once a month for a year to understand the seasonal profiles of noroviruses genotype 1 and genotype 2, enteroviruses, and adenoviruses in sewerage systems. A total of 72 samples of influent, secondary-treated wastewater before chlorination and effluent were collected from six wastewater treatment plants in Japan. Viruses were successfully recovered from 100ml of influent and 1000ml of the secondary-treated wastewater and effluent using the acid rinse method. Viruses were determined by the RT-PCR or PCR method to obtain the most probable number for each sample. All the samples were also assayed for fecal coliforms (FCs) by a double-layer method. The seasonal profiles of noroviruses genotype 1 and genotype 2 in influent were very similar, i.e. they were abundant in winter (from November to March) at a geometric mean value of 190 and 200 RT-PCR units/ml, respectively, and less frequent in summer (from June to September), at 4.9 and 9.1 RT-PCR units/ml, respectively. The concentrations of enteroviruses and adenoviruses were mostly constant all the year round, 17 RT-PCR units/ml and 320 PCR units/ml in influent, and 0.044 RT-PCR units/ml and 7.0 PCR units/ml in effluent, respectively.
Girão, V C C; Nunes-Pinheiro, D C S; Morais, S M; Sequeira, J L; Gioso, M A
2003-05-30
We evaluated the effect of a mouth-rinse prepared using Lippia sidoides essential oil (EO) in dogs with marginal gingivitis. German Shepherd dogs were distributed in two groups: control (control mouth-rinse) and EO (EO mouth-rinse). Both mouth-rinses were applied on the dogs' teeth every 2 days for 2 weeks. At day 0 and day 15, the scores for plaque-bacteria (P), calculus (C), gingivitis (G) and the inflammatory infiltrate (INF) were evaluated blindly. The results were analyzed by the Wilcoxon signed-rank and Mann-Whitney tests (P=0.05). P, C, G, and INF did not show any alteration in the control group, while in the EO group there were significant reductions in these scores.
Effects of rinsing with arginine bicarbonate and urea solutions on initial enamel lesions in situ.
Yu, Y; Wang, X; Ge, C; Wang, B; Cheng, C; Gan, Y-H
2017-04-01
The aim of this study was to investigate the effects of rinsing with arginine or urea solution on initial enamel lesions in situ. Fourteen subjects who wore mandibular removable partial dentures embedded with bovine enamel blocks with artificial enamel lesions were included. The experiment included four 4-week rinsing periods with a 10-day washout period between each rinsing period. In each rinsing period, the subjects rinsed after meal or snack using water, or 2% arginine bicarbonate, or 1% urea, or 0.05% NaF solution, five times daily. The mineralization changes of the enamel lesions were assessed using quantitative light-induced fluorescence. All groups except the water group showed a statistically significant decrease in the fluorescence loss after treatment, compared with their respective baseline. Although both the arginine group and urea group showed more decrease in fluorescence loss than that of the water group, the decrease was not statistically significantly different from that of the water group. The decrease in fluorescence loss of the NaF group was statistically significant than that of the water group, arginine group, and urea group. Rinsing with arginine or urea solution offers limited remineralizing benefit to enamel lesions over a period of 4-week time. © 2016 The Authors. Oral Diseases Published by John Wiley & Sons Ltd.
6. Photocopy of photograph, U.S. Army, ca. 1955 (original print ...
6. Photocopy of photograph, U.S. Army, ca. 1955 (original print located at Rocky Mountain Arsenal, Commerce City, Colorado). AERIAL VIEW OF BUILDING 1611. VIEW TO NORTHEAST. 'THIS IS THE HONEST JOHN WARHEAD DEMILITARIZATION PLANT. THE DEMILITARIZATION PROCESS CONSISTS OF STRIPPING AND OPENING THE WARHEAD MANUALLY AND DOWNLOADING THE M139 BOMBLETS ONTO A CONVEYOR WHICH CARRIES THEM THROUGH A PUNCH, DRAIN AND RINSE MACHINE INTO A ROTARY RETORT DEACTIVATION FURNACE WHERE THE BURSTER IS BURNED. THE BOMBLET SHELLS, WHICH ARE ALUMINUM, ARE THEN CONVEYED TO A DECONTAMINATION FURNACE WHERE THEY ARE MELTED AND CAST INTO INGOTS. THE GB, WHICH IS COLLECTED IN THE PUNCH, DRAIN AND RINSE MACHINE, IS CONDUCTED TO A STORAGE TANK AND, ULTIMATELY, IS NEUTRALIZED ... - Rocky Mountain Arsenal, Ammunition Demolition Building-Tail Fin Storage & Assembly, 2750 feet South of Ninth Avenue; 3480 feet East of D Street, Commerce City, Adams County, CO
X-ray phase Identification of Chocolate is Possible
DOE Office of Scientific and Technical Information (OSTI.GOV)
Guthrie,S.; Mazzanti, G.; Idziak, S.
2005-01-01
When examining chocolate samples by means of X-ray diffraction, it has become common practice for any sugar to be removed through repeated rinsing in cold water. While necessary in some cases, we show that it is possible to determine the phase of certain dark chocolate samples without sugar removal, through examination of distinctive X-ray diffraction peaks corresponding to lattice spacings of 3.98 and 3.70 Angstroms.
Charugundla, B R; Anjum, S; Mocherla, M
2015-05-01
The objective of this study was to compare the effectiveness of fluoride, essential oil (EO) and chlorhexidine (CHX)-containing mouth rinses on dental plaque and gingivitis and to compare their relative efficacy in patients with and without dental caries. A randomized, controlled, double- blind, crossover clinical trial was conducted for a period of 8 weeks. Thiry-six qualifying subjects, aged 12-44 years, were included in the study. Subjects were divided into caries and caries-free groups and were randomly assigned to one of the following mouth rinse groups: fluoride; EO; CHX and saline as negative control. Subjects used their respective mouth rinse for a period of 7-days each with 1-week wash-out periods. Primary efficacy variables were Quigley-Hein plaque index (PI) and Loe and Silness gingival index. Fluoride and CHX mouth rinses showed significant reduction in plaque after use of mouth rinses (P < 0.05). However, no significant differences were observed with respect to each other in reducing gingivitis (P > 0.05). Further significant differences were found in reducing plaque and gingivitis in caries-free subjects in comparison to those with caries (P < 0.05). All the three mouth rinses significantly reduced plaque accumulation and gingivitis especially in caries-free subjects in comparison to those with caries, and amongst the three, fluoride and CHX proved to be more effective than EO mouth rinse. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Soares, Léo G; Jonski, Grazyna; Tinoco, Eduardo M B; Young, Alix
2015-04-01
Zinc (Zn) reduces the formation of volatile sulphur compounds (VSCs) associated with oral malodour. Although strontium (Sr) is included in some products for reducing dental hypersensitivity, it may also have anti-halitosis properties. This randomized, double-blind, cross-over clinical study compared the anti-VSC effect of brushing with commercial toothpastes and rinses containing Zn and Sr. The volunteers (n = 30) either brushed/rinsed with/without tongue brushing using Zn-containing toothpaste/rinse, Sr-containing toothpaste/rinse, or placebo (control). Volatile sulphur compounds [hydrogen sulphide (H2 S) and methyl mercaptan (CH3 SH)] were measured, in morning breath, using gas chromatography. The anti-VSC effects of the test toothpastes and test rinses were significantly better than the anti-VSC effects of the respective controls. Toothbrushing with test toothpastes gave median reductions, compared with the control, of 70% for H2 S and 55-57% for CH3 SH. Rinsing with the Sr- and Zn-containing solutions had the same anti-VSC effect as toothbrushing and tooth- and tongue brushing with the Sr- and Zn-containing toothpastes. Zinc-containing rinse resulted in a significantly higher median salivary level of Zn compared with brushing with Zn-containing toothpaste, although this effect did not correlate with the anti-VSC effect. It can be concluded that the Sr- and Zn-containing toothpastes and the Zn- and Sr-containing rinses, when used in the evening, are equally effective in reducing morning-breath VSCs the following day. © 2015 Eur J Oral Sci.
Claydon, N C; Addy, M; Newcombe, R; Moran, J
2005-06-01
Chemicals which have a direct effect at inhibiting or reducing bacterial adherence to tooth surfaces may subsequently inhibit plaque growth and reduce gingival inflammation. This study investigated whether two anti-adherent systems could inhibit plaque re-growth in the mouth when rinsed as a solution or as a toothpaste slurry. A total of 21 subjects took part in a partially blind, seven cell cross-over study which compared the effects on plaque re-growth of a binary system containing block copolymers, a ternary system containing block copolymers and polypeptide, both used as toothpaste slurry rinses, their corresponding solution rinses, a conventional fluoride toothpaste rinse, a positive control chlorhexidine rinse and a negative water control. Following a dental prophylaxis subjects then rinsed with 10 ml of one of the test products for 1 min. twice a day over a 4-day period. Throughout each trial period the subjects were not permitted to use any other forms of oral hygiene. On the fifth day (96 h), the volunteers returned to the clinic, and plaque was assessed by (1) plaque index and (2) plaque area following disclosing with a food dye. The test phase of the trial was repeated for each agent and was followed by a 10-day "washout" period. Essentially neither of the anti-adherent systems inhibited plaque re-growth, whether administered in a toothpaste slurry or solution compared with the controls. If anything, neither of the test pastes were as effective as the marketed commercial paste (p<0.001). As expected plaque recorded following use of the chlorhexidine rinse was significantly less than that seen with any of the other rinses (p<0.001). Using this 4-day plaque re-growth model, the findings of this study failed to show any benefit in using the anti-adherent systems, either in a rinse or toothpaste, with the aim of inhibiting or reducing plaque formation.
Srirekha, A; Rashmi, K; Hegde, Jayshree; Lekha, S; Rupali, K; Reshmi, George
2013-09-01
This study evaluated the removal of debris and smear layer after post space preparation using different irrigations and passive ultrasonic agitation. Sixty human premolars were decoronated and post space prepared after endodontic therapy. The samples were then randomly divided into three experimental groups (Groups A, B, C) and one control group (Group D) with fifteen samples in each group. Groups A and B samples were treated with 10 % citric acid and 17 % ethylenediamintetraacetic acid (EDTA), respectively and passive ultrasonic agitation was done, rinsed with sodium hypochlorite and finally flushed with saline. Group C samples were conditioned with 36 % phosphoric acid and then rinsed with saline. The control group was treated with 3 % sodium hypochlorite, passive ultrasonic agitation done and flushed with saline. The samples were sectioned and evaluated for debris and smear layer removal under scanning electron microscope. 10 % citric acid showed the best removal of smear layer when compared with 17 % EDTA and 36 % phosphoric acid, but was not statistically significant (p > 0.05). The difference in scoring for debris and smear layer removal in the coronal, middle and apical third of post space of experimental groups in comparison with control group was statistically significant (p < 0.001).
Harris, Carl M.; Litteral, Charles J.; Damrau, Donna L.
1997-01-01
The U.S. Geological Survey National Water Quality Laboratory has developed a method for the determination of dissolved calcium, iron, magnesium, manganese, silica, and sodium using a modified ultrasonic nebulizer sample-introduction system to an inductively coupled plasma-optical emission spectrometer. The nebulizer's spray chamber has been modified to avoid carryover and memory effects common in some conventional ultrasonic designs. The modified ultrasonic nebulizer is equipped with a high-speed rinse cycle to remove previously analyzed samples from the spray chamber without excessive flush times. This new rinse cycle decreases sample washout times by reducing carryover and memory effects from salt or analytes in previously analyzed samples by as much as 45 percent. Plasma instability has been reduced by repositioning the argon carrier gas inlet on the spray chamber and by directly pumping waste from the chamber, instead of from open drain traps, thereby maintaining constant pressure to the plasma. The ultrasonic nebulizer improves signal intensities, which are 8 to 16 times greater than for a conventional cross-flow pneumatic nebulizer, without being sensitive to clogging from salt buildup as in cross-flow nebulizers. Detection limits for the ultrasonic nebulizer are 4 to 18 times less than detection limits achievable using a cross-flow pneumatic nebulizer, with equivalent sample analysis time.
Al-Saleh, Iman; Abduljabbar, Mai
2017-10-01
The levels of heavy metals (lead, cadmium, methylmercury and arsenic) were determined in 37 brands of imported rice commonly consumed in Saudi Arabia after soaking and rinsing with water, and their potential health risks to residents were estimated by three indices: hazard quotient (HQ), hazard index (HI) and cancer risk (CR). The mean levels of lead, cadmium, methylmercury and total arsenic in soaked (rinsed) rice grains were 0.034 (0.057), 0.015 (0.027), 0.004 (0.007) and 0.202 (0.183) μg/g dry weight, respectively. Soaking or rinsing rice grains with water decreased lead and cadmium levels in all brands to safe levels. All brands had total arsenic above the acceptable regulatory limits, irrespective of soaking or rinsing, and eight soaked and 12 rinsed brands contained methylmercury. The levels of all heavy metals except cadmium were above the acceptable regulatory limits when the rice was neither rinsed nor soaked. Weekly intakes of lead, cadmium, methylmercury and total arsenic from soaked (rinsed) grains were 0.638 (1.068), 0.279 (0.503), 0.271 (0.309) and 3.769 (3.407) μg/kg body weight (bw). The weekly intakes of lead and methylmercury from the consumption of one rinsed and two soaked rice brands respectively, exceeded the Provisional Tolerance Weekly Intake set by the Food and Agriculture Organization and the World Health Organization. The weekly intake of total arsenic for all brands was above the lowest benchmark dose lower confidence limit (BMDL 01 ) level of 0.3μg/kg bw/d for an increased cancer risk set by European Food Safety Authority. Either soaking or rinsing grains before consumption can minimize the non-carcinogenic health risks to residents from cadmium and lead (HQ<1). Our local consumers, though, may experience health consequences from rice contaminated mainly with arsenic (HQ>1 all brands) and to a lesser extent with methylmercury (HQ>1 in 4 brands), even when soaked or rinsed with water before consumption. The combined non-carcinogenic effect of all metals expressed as HI was >1, including soaked or rinsed rice, with total arsenic the major contributor followed by methylmercury. CR for total arsenic, whether consuming soaked, rinsed, un-soaked or unrinsed grains, exceeded the acceptable level of 10 -4 . Long-term consumption of rice contaminated with heavy metals, particularly arsenic, can pose potential health risks to the local population, especially vulnerable groups (pregnant women, children, elderly and patients). More attention should thus be given to contaminated rice and preventive measures should be taken. Copyright © 2017 Elsevier GmbH. All rights reserved.
Teng, Fei; He, Tao; Huang, Shi; Bo, Cun-Pei; Li, Zhen; Chang, Jin-Lan; Liu, Ji-Quan; Charbonneau, Duane; Xu, Jian; Li, Rui; Ling, Jun-Qi
2016-09-29
Oral rinses containing chemotherapeutic agents, such as cetylpyridinium chloride (CPC), can alleviate plaque-induced gingival infections, but how oral microbiota respond to these treatments in human population remains poorly understood. Via a double-blinded, randomised controlled trial of 91 subjects, the impact of CPC-containing oral rinses on supragingival plaque was investigated in experimental gingivitis, where the subjects, after a 21-day period of dental prophylaxis to achieve healthy gingivae, received either CPC rinses or water for 21 days. Within-subject temporal dynamics of plaque microbiota and symptoms of gingivitis were profiled via 16S ribosomal DNA gene pyrosequencing and assessment with the Mazza gingival index. Cetylpyridinium chloride conferred gingival benefits, as progression of gingival inflammation resulting from a lack of dental hygiene was significantly slower in the mouth rinse group than in the water group due to inhibition of 17 gingivitis-enriched bacterial genera. Tracking of plaque α and β diversity revealed that CPC treatment prevents acquisition of new taxa that would otherwise accumulate but maintains the original biodiversity of healthy plaques. Furthermore, CPC rinses reduced the size, local connectivity and microbiota-wide connectivity of the bacterial correlation network, particularly for nodes representing gingivitis-enriched taxa. The findings of this study provide mechanistic insights into the impact of oral rinses on the progression and maturation of dental plaque in the natural human population.
Teng, Fei; He, Tao; Huang, Shi; Bo, Cun-Pei; Li, Zhen; Chang, Jin-Lan; Liu, Ji-Quan; Charbonneau, Duane; Xu, Jian; Li, Rui; Ling, Jun-Qi
2016-01-01
Oral rinses containing chemotherapeutic agents, such as cetylpyridinium chloride (CPC), can alleviate plaque-induced gingival infections, but how oral microbiota respond to these treatments in human population remains poorly understood. Via a double-blinded, randomised controlled trial of 91 subjects, the impact of CPC-containing oral rinses on supragingival plaque was investigated in experimental gingivitis, where the subjects, after a 21-day period of dental prophylaxis to achieve healthy gingivae, received either CPC rinses or water for 21 days. Within-subject temporal dynamics of plaque microbiota and symptoms of gingivitis were profiled via 16S ribosomal DNA gene pyrosequencing and assessment with the Mazza gingival index. Cetylpyridinium chloride conferred gingival benefits, as progression of gingival inflammation resulting from a lack of dental hygiene was significantly slower in the mouth rinse group than in the water group due to inhibition of 17 gingivitis-enriched bacterial genera. Tracking of plaque α and β diversity revealed that CPC treatment prevents acquisition of new taxa that would otherwise accumulate but maintains the original biodiversity of healthy plaques. Furthermore, CPC rinses reduced the size, local connectivity and microbiota-wide connectivity of the bacterial correlation network, particularly for nodes representing gingivitis-enriched taxa. The findings of this study provide mechanistic insights into the impact of oral rinses on the progression and maturation of dental plaque in the natural human population. PMID:27680288
Polyethylene glycol rinse solution: An effective way to prevent ischemia-reperfusion injury
Zaouali, Mohamed Amine; Bejaoui, Mohamed; Calvo, Maria; Folch-Puy, Emma; Pantazi, Eirini; Pasut, Gianfranco; Rimola, Antoni; Ben Abdennebi, Hassen; Adam, René; Roselló-Catafau, Joan
2014-01-01
AIM: To test whether a new rinse solution containing polyethylene glycol 35 (PEG-35) could prevent ischemia-reperfusion injury (IRI) in liver grafts. METHODS: Sprague-Dawley rat livers were stored in University of Wisconsin preservation solution and then washed with different rinse solutions (Ringer’s lactate solution and a new rinse solution enriched with PEG-35 at either 1 or 5 g/L) before ex vivo perfusion with Krebs-Heinseleit buffer solution. We assessed the following: liver injury (transaminase levels), mitochondrial damage (glutamate dehydrogenase activity), liver function (bile output and vascular resistance), oxidative stress (malondialdehyde), nitric oxide, liver autophagy (Beclin-1 and LCB3) and cytoskeleton integrity (filament and globular actin fraction); as well as levels of metalloproteinases (MMP2 and MMP9), adenosine monophosphate-activated protein kinase (AMPK), heat shock protein 70 (HSP70) and heme oxygenase 1 (HO-1). RESULTS: When we used the PEG-35 rinse solution, reduced hepatic injury and improved liver function were noted after reperfusion. The PEG-35 rinse solution prevented oxidative stress, mitochondrial damage, and liver autophagy. Further, it increased the expression of cytoprotective heat shock proteins such as HO-1 and HSP70, activated AMPK, and contributed to the restoration of cytoskeleton integrity after IRI. CONCLUSION: Using the rinse solution containing PEG-35 was effective for decreasing liver graft vulnerability to IRI. PMID:25473175
Efficacy of a mouthrinse based on hydroxyapatite to reduce initial bacterial colonisation in situ.
Kensche, A; Holder, C; Basche, S; Tahan, N; Hannig, C; Hannig, M
2017-08-01
The present in situ - investigation aimed to specify the impact of pure hydroxyapatite microclusters on initial bioadhesion and bacterial colonization at the tooth surface. Pellicle formation was carried out in situ on bovine enamel slabs (9 subjects). After 1min of pellicle formation rinses with 8ml of hydroxyapatite (HA) microclusters (5%) in bidestilled water or chlorhexidine 0.2% were performed. As negative control no rinse was adopted. In situ biofilm formation was promoted by the intraoral slab exposure for 8h overnight. Afterwards initial bacterial adhesion was quantified by DAPI staining and bacterial viability was determined in vivo/in vitro by live/dead-staining (BacLight). SEM analysis evaluated the efficacy of the mouthrinse to accumulate hydroxyapatite microclusters at the specimens' surface and spit-out samples of the testsolution were investigated by TEM. Compared to the control (2.36×10 6 ±2.01×10 6 bacteria/cm 2 ), significantly reduced amounts of adherent bacteria were detected on specimens rinsed with chlorhexidine 0.2% (8.73×10 4 ±1.37×10 5 bacteria/cm 2 ) and likewise after rinses with the hydroxyapatite testsolution (2.08×10 5 ±2.85×10 5 bacteria/cm 2 , p<0.001). No demonstrable effect of HA-particles on Streptococcus mutans viability could be shown. SEM analysis confirmed the temporary adsorption of hydroxyapatite microclusters at the tooth surface. Adhesive interactions of HA-particles with oral bacteria were shown by TEM. Hydroxyapatite microclusters reduced initial bacterial adhesion to enamel in situ considerably and could therefore sensibly supplement current approaches in dental prophylaxis. Copyright © 2017 Elsevier Ltd. All rights reserved.
Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak
2018-01-01
Background The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. Material and Methods A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p<0.05. Results There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. Conclusions The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words:Pit and fissure sealant, Universal adhesive, Saliva. PMID:29670708
Influence of Blood Contamination on Bond Strength of a Self-Etching System
de Carvalho Mendonça, Ellen Cristina; Vieira, Samuel Nilo; Kawaguchi, Fernando Aparecido; Powers, John; Matos, Adriana Bona
2010-01-01
Objectives: To detect the influence of blood contamination (BC) on the bond strength (BS) of a self-etching bonding system (SES) to enamel and dentine. Methods: 25 human molars were longitudinally sectioned on the mesio-distal axis in order to obtain 50 specimens, which were embedded in acrylic resin. At first, the specimens were ground to expose a flat surface of enamel, and a bond strength test was performed. Afterwards, the samples were ground again in order to obtain a flat surface of dentine. Ten groups (total: n=100) were assigned according to substrate (enamel and dentine), step in the bonding sequence when contamination occurred (before the acidic primer and after the bonding resin), and contamination treatment (dry or rinse and dry procedure). Fresh human blood was introduced either before or after SES application (Clearfil SE Bond) and treated with air drying, or by rinsing and drying following application. Composite resin (Filtek Z-250,3M ESPE) was applied as inverted, truncated cured cones that were debonded in tension. Results: The mean tensile BS values (MPa) for enamel/dentine were 19.4/23.0 and 17.1/10.0 for rinse-and-dry treatment (contamination before and after SES, respectively); while the measurements for the dry treatment, 16.2/23.3 and 0.0/0.0 contamination before and after SES, respectively. Conclusions: It was determined that blood contamination impaired adhesion to enamel and dentine when it occurred after bond light curing. Among the tested contamination treatments, the rinse-and-dry treatment produced the highest bond strength with BC after SES application, but it was not sufficient to recover the BS in the contamination-free group. PMID:20613916
Memarpour, Mahtab; Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak
2018-01-01
The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p <0.05. There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words: Pit and fissure sealant, Universal adhesive, Saliva.
NASA Technical Reports Server (NTRS)
1983-01-01
A description is given of the collection and treatment of samples of Prochloron cells. The cells of Prochloron were obtained and prepared in the following way. Colonies of the symbiotic host, the giant didemnid ascidian Lissoclinum patella, were collected at low-tide level on reef-flat sand between Kamori Island and Koror, Palau, Western Caroline Islands. The animal colonies were taken, immersed in sea water, to an 8,000-litre holding tank and kept with constantly running sea water at 30 deg. Individual colonies were picked clean of contaminants, rinsed in sea water buffered with 40 nM or 100 mM Tris buffer at pH 8.4, and squeezed by hand to express the algal cells from the cloacal atria. The algae were received in about an equal volume of the same buffered sea water; this neutralized the acids liberated by the bruised ascidians and thereby maintained the Ph high enough to keep the algal cells green. The Prochloron cells were washed twice with buffered sea water and concentrated by centrifugation at about 50 g for 90 seconds. Microscopic examination revealed that contamination by animal host cells or bacteria was negligible (much less than 1%).
Song, Guiyun; Banov, Daniel; Bassani, August S
2018-01-01
Several oral rinses are commercially available to alleviate the symptoms of oral mucositis. Prolonged retention of active pharmaceutical ingredients in the oral cavity is a major problem. In this study, we modified the Stanford oral rinse by including a proprietary mucoadhesive polymer called MucoLox, which we hypothesized would improve active pharmaceutical ingredient mucoadhesion. Characterization of this newly compounded oral rinse showed absence of cytotoxicity in human oral keratinocyte and fibroblast cell lines. The compounded formulation significantly stimulated the migration of these two cell lines in Oris Cell Migration Assay plates, better than the reference commercial product Magic mouthwash. Based on this in vitro study, the new Stanford modified oral rinse with MucoLox is safe and may promote healing of oral mucositis. Copyright© by International Journal of Pharmaceutical Compounding, Inc.
Feres, Magda; Gursky, Lauren Christine; Faveri, Marcelo; Tsuzuki, Claudia Ota; Figueiredo, Luciene Cristina
2009-10-01
To compare the clinical and microbiological effects of scaling and root planing (SRP) alone or combined with mechanical [professional plaque control (PPC)] or chemical [chlorhexidine rinsing (CHX)] control of supragingival plaque in the treatment of chronic periodontitis. Sixty subjects were randomly assigned to receive SRP alone or combined with PPC (twice a week) or with CHX rinsing (twice a day). The adjunctive treatments began with SRP and were continued for 42 days. Clinical and microbiological examinations were performed at baseline, 2 and 6 months post-therapy. Subgingival plaque samples were analysed for 38 bacterial species by checkerboard DNA-DNA hybridization. The two test treatments were more effective in improving probing depth and clinical attachment level (CAL) than SRP alone, even in intermediate and deep sites. CAL gain was better maintained in the CHX group. The most beneficial microbiological changes were observed in CHX-treated subjects, who showed a significant reduction in the proportions of red and orange complexes, as well as an increase in the proportions of the host-compatible bacterial species. Strict plaque control performed during and after SRP improves periodontal treatment outcomes. The greatest microbiological and clinical benefits were observed with the use of CHX rinsing.
USDA-ARS?s Scientific Manuscript database
Laser induced breakdown spectroscopy (LIBS) is used as the basis for discrimination between 2 genera of gram-negative bacteria and 2 genera of gram-positive bacteria representing pathogenic threats commonly found in poultry processing rinse waters. Because LIBS-based discrimination relies primarily ...
Jeddy, Nadeem; Ranganathan, K; Devi, Uma; Joshua, Elizabeth
2011-01-01
Background: The purpose of this study was to study the drug sensitivity pattern of Candida seen in HIV seropositive patients in Chennai, South India. Materials and Methods: 36 oral rinse samples were collected from HIV seropositive individuals with (21 patients) and without (15 patients) clinical candidiasis. The type of Candidiasis, quantitative estimation, differentiation of candida species and antifungal susceptibility testing was done using different tests. Results: In the 21 patients with candidiasis, pseudomembranous type predominated with low CD4 counts and high colony forming units. Antifungal Drug sensitivity test revealed resistance to fluconazole which is attributed to long term exposure to the drug. Conclusion: The results of the study confirm the hypothesis that candidal species can be isolated in HIV positive patients with clinical candidiasis. In HIV infection there are fluconazole resistant candida species emerging mainly due to long term exposure to the drug. PMID:22529577
21 CFR 355.50 - Labeling of anticaries drug products.
Code of Federal Regulations, 2010 CFR
2010-04-01
... polish,” “tooth powder;” (optional: “dental”) “preventive treatment gel;” or (optional: “treatment” or “dental”)) (select one of the following: “rinse,” “concentrated solution,” “rinse powder,” or “rinse..., under the heading “Indication,” the following: “Aids in the prevention of dental (select one of the...
Installation Assessment of Frankford Arsenal.
1977-10-01
sulfate , sulfuric acid , ac ’solution 40 Hot water bath 41 Nickel plate Nickel sulfate and chloride sulfuric acid , acid ...solution 42 Chromium Copper plate Copper sulfate and sulfuric acid , acid solution 11-14 TABLE 11-2 (continued) Tank No. Plating Process Use Contents...46 Water rinse Water 47 Water rinse Water 48 Water rinse Water 49 Acid Chromic acid , acetic acid , nickel sulfate and sulfuric
21 CFR 355.55 - Principal display panel of all fluoride rinse drug products.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Principal display panel of all fluoride rinse drug products. 355.55 Section 355.55 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... § 355.55 Principal display panel of all fluoride rinse drug products. In addition to the statement of...
21 CFR 355.55 - Principal display panel of all fluoride rinse drug products.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Principal display panel of all fluoride rinse drug products. 355.55 Section 355.55 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... § 355.55 Principal display panel of all fluoride rinse drug products. In addition to the statement of...
Gamboa, Daniel; Priolo, Morgan A; Ham, Aaron; Grunlan, Jaime C
2010-03-01
A versatile, high speed robot for layer-by-layer deposition of multifunctional thin films, which integrates concepts from previous dipping systems, has been designed with dramatic improvements in software, positioning, rinsing, drying, and waste removal. This system exploits the electrostatic interaction of oppositely charged species to deposit nanolayers (1-10 nm thick) from water onto the surface of a substrate. Dip times and number of deposited layers are adjustable through a graphical user interface. In between dips the system spray rinses and dries the substrate by positioning it in the two-tiered rinse-dry station. This feature significantly reduces processing time and provides the flexibility to choose from four different procedures for rinsing and drying. Assemblies of natural montmorillonite clay and polyethylenimine are deposited onto 175 microm poly(ethylene terephthalate) film to demonstrate the utility of this automated deposition system. By altering the type of rinse-dry procedure, these clay-based assemblies are shown to exhibit variations in film thickness and oxygen transmission rate. This type of system reproducibly deposits films containing 20 or more layers and may also be useful for other types of coatings that make use of dipping.
Alqumber, Mohammed A; Arafa, Khaled A
2014-11-01
To determine whether site-specific mouth rinsing with oral disinfectants can improve oral odor beyond the traditional panoral mouth disinfection with mouth rinses by targeting specifically oral malodor implicated anaerobic bacteria. Twenty healthy fasting subjects volunteered for a blinded prospective, descriptive correlational crossover cross-section clinical trial conducted during the month of Ramadan between July and August 2013 in Albaha province in Saudi Arabia involving the application of Listerine Cool Mint mouth rinse by either the traditional panoral rinsing method, or a site-specific disinfection method targeting the subgingival and supragingival plaque and the posterior third of the tongue dorsum, while avoiding the remaining locations within the oral cavity. The viable anaerobic and aerobic bacterial counts, volatile sulfur compounds (VSCs) levels, organoleptic assessment of oral odor, and the tongue-coating index were compared at baseline, one, 5, and 9 hours after the treatment. The site-specific disinfection method reduced the VSCs and anaerobic bacterial loads while keeping the aerobic bacterial numbers higher than the traditional panoral rinsing method. Site-specific disinfection can more effectively maintain a healthy oral cavity by predominantly disinfecting the niches of anaerobic bacteria within the oral cavity.
ERIC Educational Resources Information Center
Andia, Jonny F.; Deren, Sherry; Robles, Rafaela R.; Kang, Sung-Yeon; Colon, Hector M.
2008-01-01
This study examines the influence of peer norms on sharing of injection paraphernalia (e.g., indirect sharing behaviors, including sharing of cookers, cotton, rinse water and back/front loading) among Puerto Rican injection drug users (IDUs) in Bayamon, Puerto Rico, and East Harlem, New York City. Data were collected from 873 Puerto Rican IDUs…
Residual indicator bacteria in autosampler tubing: a field and laboratory assessment.
Hathaway, J M; Hunt, W F; Guest, R M; McCarthy, D T
2014-01-01
Microbial contamination in surface waters has become a worldwide cause for concern. As efforts are made to reduce this contamination, monitoring is integral to documenting and evaluating water quality improvements. Autosamplers are beneficial in such monitoring efforts, as large data sets can be generated with minimized effort. The extent to which autosamplers can be utilized for microbial monitoring is largely unknown due to concerns over contamination. Strict sterilization regimes for components contacting the water being sampled are difficult, and sometimes logistically implausible, when utilizing autosamplers. Field experimentation showed contamination of fecal coliform in autosamplers to be more of a concern than that of Escherichia coli. Further study in a controlled laboratory environment suggested that tubing configuration has a significant effect on residual E. coli concentrations in sampler tubing. The amount of time that passed since the last sample was collected from a given sampler (antecedent dry weather period - DWP) tubing was also a significant factor. At a DWP of 7 days, little to no contamination was found. Thus, simple protocols such as providing positive drainage of tubing between sample events and programming samplers to include rinses will reduce concerns of contamination in autosamplers.
Effects of Shampoo and Water Washing on Hair Cortisol Concentrations
Hamel, Amanda F.; Meyer, Jerrold S.; Henchey, Elizabeth; Dettmer, Amanda M.; Suomi, Stephen J.; Novak, Melinda A.
2010-01-01
Background Measurement of cortisol in hair is an emerging biomarker for chronic stress in human and nonhuman primates. Currently unknown, however, is the extent of potential cortisol loss from hair that has been repeatedly exposed to shampoo and/or water. Methods Pooled hair samples from 20 rhesus monkeys were subjected to five treatment conditions: 10, 20, or 30 shampoo washes, 20 water-only washes, or a no-wash control. For each wash, hair was exposed to a dilute shampoo solution or tap water for 45 s, rinsed 4 times with tap water, and rapidly dried. Samples were then processed for cortisol extraction and analysis using previously published methods. Results Hair cortisol levels were significantly reduced by washing, with an inverse relationship between number of shampoo washes and the cortisol concentration. This effect was mainly due to water exposure, as cortisol levels following 20 water-only washes were similar to those following 20 shampoo treatments. Conclusions Repeated exposure to water with or without shampoo appears to leach cortisol from hair, yielding values that underestimate the amount of chronic hormone deposition within the shaft. Collecting samples proximal to the scalp and obtaining hair washing frequency data may be valuable when conducting human hair cortisol studies. PMID:21034727
Charles, Christine Ann; McGuire, James Anthony; Sharma, Naresh Chandra; Qaqish, James
2011-01-01
Two antimicrobial agents, a fixed combination of essential oils (EOs) and 0.07% cetylpyridinium chloride (CPC) are found in commercially available mouthrinses, Listerine® Antiseptic and Crest® Pro HealthTM, respectively. Both mouthrinses have been shown to control dental plaque and gingivitis in short and longer term studies. The aim of this study was to determine the comparative effectiveness of these two mouthrinses using a 2-week experimental gingivitis model. Qualified subjects were randomly assigned to one of three mouthrinse groups: a fixed combination of EOs, 0.07% CPC, or negative control (C) rinse. Following baseline clinical assessments and a dental prophylaxis, subjects began a two-week period in which they rinsed twice daily with their assigned rinse and abstained from any mechanical oral hygiene procedures or other oral care products. Subjects were reassessed at the end of the two-week period. One hundred and forty-seven subjects were randomized and 142 completed this study. After two weeks use, the EOs rinse was superior (p < 0.011) to the CPC rinse in inhibiting the development of gingivitis, plaque, and bleeding, with 9.4% and 6.6% reductions compared to CPC for gingivitis and plaque, respectively. Both rinses were superior to the negative control rinse (p < 0.001). This study demonstrates that the essential oil-containing mouthrinse has superior antiplaque/antigingivitis effectiveness compared to the 0.07% CPC-containing mouthrinse without mechanical oral hygiene influence.
Lowering the environmental impact of high-kappa/ metal gate stack surface preparation processes
NASA Astrophysics Data System (ADS)
Zamani, Davoud
ABSTRACT Hafnium based oxides and silicates are promising high-κ dielectrics to replace SiO2 as gate material for state-of-the-art semiconductor devices. However, integrating these new high-κ materials into the existing complementary metal-oxide semiconductor (CMOS) process remains a challenge. One particular area of concern is the use of large amounts of HF during wet etching of hafnium based oxides and silicates. The patterning of thin films of these materials is accomplished by wet etching in HF solutions. The use of HF allows dissolution of hafnium as an anionic fluoride complex. Etch selectivity with respect to SiO2 is achieved by appropriately diluting the solutions and using slightly elevated temperatures. From an ESH point of view, it would be beneficial to develop methods which would lower the use of HF. The first objective of this study is to find new chemistries and developments of new wet etch methods to reduce fluoride consumption during wet etching of hafnium based high-κ materials. Another related issue with major environmental impact is the usage of large amounts of rinsing water for removal of HF in post-etch cleaning step. Both of these require a better understanding of the HF interaction with the high-κ surface during the etching, cleaning, and rinsing processes. During the rinse, the cleaning chemical is removed from the wafers. Ensuring optimal resource usage and cycle time during the rinse requires a sound understanding and quantitative description of the transport effects that dominate the removal rate of the cleaning chemicals from the surfaces. Multiple processes, such as desorption and re-adsorption, diffusion, migration and convection, all factor into the removal rate of the cleaning chemical during the rinse. Any of these processes can be the removal rate limiting process, the bottleneck of the rinse. In fact, the process limiting the removal rate generally changes as the rinse progresses, offering the opportunity to save resources. The second objective of this study is to develop new rinse methods to reduce water and energy usage during rinsing and cleaning of hafnium based high-κ materials in single wafer-cleaning tools. It is necessary to have a metrology method which can study the effect of all process parameters that affect the rinsing by knowing surface concentration of contaminants in patterned hafnium based oxides and silicate wafers. This has been achieved by the introduction of a metrology method at The University of Arizona which monitors the transport of contaminant concentrations inside micro- and nano- structures. This is the only metrology which will be able to provide surface concentration of contaminants inside hafnium based oxides and silicate micro-structures while the rinsing process is taking place. The goal of this research is to study the effect of various process parameters on rinsing of patterned hafnium based oxides and silicate wafers, and modify a metrology method for end point detection.
Xu, Xiaodong; Meng, Xiangfeng
2014-11-01
To evaluate and compare the physical and chemical properties of four different dental cements under long-term water storage. A glass-ionomer cement (A:Fuji I), a resin reinforced glass-ionomer (B: Fuji Plus), a self-adhesive resin cement (C:G-Cem), and an etch & rinse resin cement (D: Duolink) were taken as samples. According to ISO 4049, water sorption and solubility of four resin cements under different storage times (1 week, 1, 3, 6 and 12 months) were calculated (n = 5), meanwhile their surface Knoop micro hardness values were measured. Surface cracks were detected on sample B and C after 12 months. Sample A was fragmentized after 6 months. Sample B showed significantly lower surface hardness after 12 months than it did after the first 24 hours of water storage (P < 0.05). Sample D showed significantly lower water sorption than other cements did at all exam time point. The highest water sorption values were observed in Sample D after 1 month [(40.8±2.5) µg/mm(3)], in Sample B after 3 months [(551.3±22.5) µg/mm(3)], in Sample C after 12 months [(147.5±8.3) µg/mm(3)]. The highest solubility values were detected in Sample B after 3 months [(105.3±10.5) µg/mm(3)], in Sample C after 12 months [(79.3 ± 6.2) µg/mm(3)], and in Sample D after 12 months [(23.9 ± 6.9) µg/mm(3)]. Among the four types of cements, the etch & rinse resin cement showed the best stability of physical and chemical properties under long-term water storage.
Estevez, Roberto; Conde, Antonio J; Valencia de Pablo, Oliver; de la Torre, Francisco; Rossi-Fedele, Giampiero; Cisneros, Rafael
2017-07-01
The aim of this study was to evaluate the porcine palatal mucosa dissolution from artificial grooves using a final rinse with sodium hypochlorite (NaOCl) with or without a surfactant or ultrasonic activation (PUI). The root canals of 130 human maxillary central incisors were chemomechanically prepared and the teeth split. A standardized longitudinal intracanal groove was created in 1 of the root halves. One hundred thirty porcine palatal mucosa samples were collected, adapted in order to fit into the grooves, and weighed. The reassembled specimens were randomly divided in 3 experimental groups (n = 40) based on their irrigation protocol (ie, positive pressure [PP] and PUI during 15 [PUI-15] or 30 seconds [PUI-30]) and divided in subgroups according to the NaOCl preparation used: Vista 6% plain (Vista Dental Products, Racine, WI) or Chlor-XTRA (Vista Dental Products) (containing surfactant). An EDTA intermediate rinse was included. Palatal mucosa weights were measured after the assays. The intergroup weight changes were statistically analyzed. Complete dissolution did not occur in any sample. Chlor-XTRA subgroups were associated with increased weight reduction compared with Vista 6% plain subgroups; however, the differences were significant (P < .05) only for PP and PUI-15. PUI-30 increased weight reduction compared with PP for both hypochlorites and PUI-15 using Vista 6% plain (P < .05). PUI-30 with Vista 6% plain performed significantly better than PP with Chlor-XTRA (P < .05). The addition of a surfactant to NaOCl and/or PUI activation increased palatal mucosa dissolution within artificial grooves in the root canal of incisor teeth. PUI agitation was often able to compensate for the absence of surfactants. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.
Brumbaugh, W.G.; Morman, S.A.; May, T.W.
2011-01-01
Vegetation, sub-surface peat, and road dust were sampled near the Delong Mountain Transportation System (DMTS) haul road in northwest Alaska in 2005-2006 to document aluminum, barium, cadmium, lead, and zinc concentrations, and to evaluate bioaccessibility of these metals. The DMTS haul road is the transport corridor between Red Dog Mine (a large-scale, lead-zinc mine and mill) and the coastal shipping port, and it traverses National Park Service lands. Compared to reference locations, total metal concentrations in four types of vegetation (birch, cranberry, and willow leaves, and cotton grass blades/stalks) collected 25 m from the haul road were enriched on average by factors of 3.5 for zinc, 8.0 for barium, 20 for cadmium, and 150 for lead. Triple rinsing of vegetation with a water/methanol mixture reduced metals concentrations by at most 50%, and cadmium and zinc concentrations were least affected by rinsing. Cadmium and zinc bioaccessibility was greater in vegetation (50% to 100%) than in dust (15% to 20%); whereas the opposite pattern was observed for lead bioaccessibility (<30% in vegetation; 50% in dust). Barium exhibited low-to-intermediate bioaccessibility in dust and vegetation (20% to 40%), whereas aluminum bioaccessibility was relatively low (<6%) in all sample types. Our reconnaissance-level study indicates that clean-up and improvements in lead/zinc concentrate transfer activities have been effective; however, as of 2006, metal dispersion from past and/or present releases of fugitive dusts along the DMTS road still may have been contributing to elevated metals in surface vegetation. Vegetation was most enriched in lead, but because bioaccessibility of cadmium was greater, any potential risks to animals that forage near the haul road might be equally important for both of these metals. ?? 2011 Springer Science+Business Media B.V. (outside the USA).
Shan, X. C.; Wolffs, P.; Griffiths, M. W.
2005-01-01
In this study, an immunomagnetic capture method and a real-time reverse transcription-PCR assay were used to quantify hepatitis A virus (HAV) in green onion and strawberry rinses. This combined protocol detected as low as 0.5 PFU HAV in produce rinses and concentrated HAV levels up to 20-fold. PMID:16151164
Green, Nelson W.; Perdue, E. Michael; Aiken, George R.; Butler, Kenna D.; Chen, Hongmei; Dittmar, Thorsten; Niggemann, Jutta; Stubbins, Aron
2014-01-01
Dissolved organic matter (DOM) was isolated from large volumes of deep (674 m) and surface (21 m) ocean water via reverse osmosis/electrodialysis (RO/ED) and two solid-phase extraction (SPE) methods (XAD-8/4 and PPL) at the Natural Energy Laboratory of Hawaii Authority (NELHA). By applying the three methods to common water samples, the efficiencies of XAD, PPL and RO/ED DOM isolation were compared. XAD recovered 42% of dissolved organic carbon (DOC) from deep water (25% with XAD-8; 17% with XAD-4) and 30% from surface water (16% with XAD-8; 14% with XAD-4). PPL recovered 61 ± 3% of DOC from deep water and 61% from surface water. RO/ED recovered 82 ± 3% of DOC from deep water, 14 ± 3% of which was recovered in a sodium hydroxide rinse, and 75 ± 5% of DOC from surface water, with 12 ± 2% in the sodium hydroxide rinse. The highest recoveries of all were achieved by the sequential isolation of DOC, first with PPL and then via RO/ED. This combined technique recovered 98% of DOC from a deep water sample and 101% of DOC from a surface water sample. In total, 1.9, 10.3 and 1.6 g-C of DOC were collected via XAD, PPL and RO/ED, respectively. Rates of DOC recovery using the XAD, PPL and RO/ED methods were 10, 33 and 10 mg-C h− 1, respectively. Based upon C/N ratios, XAD isolates were heavily C-enriched compared with water column DOM, whereas RO/ED and PPL ➔ RO/ED isolate C/N values were most representative of the original DOM. All techniques are suitable for the isolation of large amounts of DOM with purities suitable for most advanced analytical techniques. Coupling PPL and RO/ED techniques may provide substantial progress in the search for a method to quantitatively isolate oceanic DOC, bringing the entirety of the DOM pool within the marine chemist's analytical window.
He, Songlin; Wei, Yin; Fan, Xu; Hu, Deyu; Sreenivasan, P K
2011-01-01
This randomized double-blind clinical study evaluated the antimicrobial efficacy of two mouthwashes containing (1) 0.075% cetylpyridinium chloride (CPC) + 0.05% sodium fluoride (NaF) in an alcohol-free base and (2) 0.075% CPC + 0.05% NaF in a 6% alcohol base, versus a negative control mouthwash containing 0.05% NaF in an alcohol-free base on numbers of bacteria in supragingival plaque 12 hours after a single use and 12 hours after 14 days' use. Enrolled subjects completed a one-week washout phase prior to providing baseline samples of supragingival plaque that were analyzed for numbers of anaerobic microorganisms. Subjects were randomized to a treatment group and instructed to rinse with 20 mL of the assigned mouthwash for 30 seconds. Post-treatment microbiological analyses were conducted on plaque samples collected 12 hours after the first use of each assigned mouthwash and after completing 14 days of twice-daily use of each assigned mouthwash. Oral examinations were completed by a dentist at each sample collection to assess soft and hard tissue oral health over the course of the study. The study enrolled 188 adults (mean age 45.78 years; age range 23-69). Subjects rinsing with the CPC-containing mouthwash realized a statistically significant (p < 0.05) reduction in numbers of supragingival anaerobic bacteria at the 12-hour evaluation after a single use. In comparison to the control mouthwash, use of the CPC mouthwash in an alcohol base resulted in a 35.3% reduction in numbers of anaerobic plaque bacteria, while the CPC mouthwash in an alcohol-free base demonstrated a 34.5% reduction. Further, the analysis after twice-daily use for 14 days indicated that the CPC mouthwash in an alcohol base demonstrated a 73.8% reduction in anaerobic plaque bacteria, while the CPC mouthwash in an alcohol-free base demonstrated a 70.9% reduction in anaerobic plaque bacteria versus the control mouthwash. The CPC mouthwash in an alcohol-free base reduced supragingival plaque bacteria by 34.5% and 70.9% compared to the control mouthwash 12 hours after a single use and after 14 days of use, respectively. In addition, the CPC mouthwash in an alcohol base reduced supragingival bacteria by 35.3% and 73.8% compared to the control mouthwash 12 hours after a single use and after 14 days of use, respectively. There were no statistically significant differences between the CPC-containing mouthwashes at either of the post-treatment time points.
NASA Technical Reports Server (NTRS)
Wilson, D. A.
1976-01-01
Specific requirements for a wash/rinse capability to support Spacelab biological experimentation and to identify various concepts for achieving this capability were determined. This included the examination of current state-of-the-art and emerging technology designs that would meet the wash/rinse requirements. Once several concepts were identified, including the disposable utensils, tools and gloves or other possible alternatives, a tradeoff analysis involving system cost, weight, volume utilization, functional performance, maintainability, reliability, power utilization, safety, complexity, etc., was performed so as to determine an optimum approach for achieving a wash/rinse capability to support future space flights. Missions of varying crew size and durations were considered.
Kaliyaperumal, Subadra; Sankarapandian, Sathasivasubramanian
2016-01-01
The aim of this study was to quantitatively investigate the hypermethylation of p16 gene in buccal cells and saliva of oral submucous fibrosis (OSMF) patients using real-time quantitative methylation-specific polymerase chain reaction (PCR) and to compare the values of two methods. A total of 120 samples were taken from 60 subjects selected for this study, of which 30 were controls and 30 patients were clinically and histopathologically diagnosed with OSMF. In both groups, two sets of samples were collected, one directly from the buccal cells through cytobrush technique and the other through salivary rinse. We analyzed the samples for the presence of p16 hypermethylation using quantitative real-time PCR. In OSMF, the hypermethylation status of p16 in buccal cells was very high (93.3%) and in salivary samples, it was partially methylated (50%). However, no hypermethylation was found in controls suggesting that significant quantity of p16 hypermethylation was present in buccal cells and saliva in OSMF. This study indicates that buccal cell sampling may be a better method for evaluation than the salivary samples. It signifies that hypermethylation of p16 is an important factor to be considered in epigenetic alterations of normal cells to oral precancer, i.e. OSMF.
Lucas, Marcel; Macdonald, Brian A; Wagner, Gregory L; Joyce, Stephen A; Rector, Kirk D
2010-08-01
Lignocellulosic biomass offers economic and environmental advantages over corn starch for biofuels production. However, its fractionation currently requires energy-intensive pretreatments, due to the lignin chemical resistance and complex cell wall structure. Recently, ionic liquids have been used to dissolve biomass at high temperatures. In this study, thin sections of poplar wood were swollen by ionic liquid (1-ethyl-3-methylimidazolium acetate) pretreatment at room temperature. The samples contract when rinsed with deionized water. The controlled expansion and contraction of the wood structure can be used to incorporate enzymes and catalysts deep into the wood structure for improved pretreatments and accelerated cellulose hydrolysis. As a proof of concept, silver and gold nanoparticles of diameters ranging from 20 to 100 nm were incorporated at depths up to 4 mum. Confocal surface-enhanced Raman images at different depths show that a significant number of nanoparticles were incorporated into the pretreated sample, and they remained on the samples after rinsing. Quantitative X-ray fluorescence microanalyses indicate that the majority of nanoparticle incorporation occurs after an ionic liquid pretreatment of less than 1 h. In addition to improved pretreatments, the incorporation of materials and chemicals into wood and paper products enables isotope tracing, development of new sensing, and imaging capabilities.
Vigliaturo, Ruggero; Capella, Silvana; Rinaudo, Caterina; Belluso, Elena
2016-07-01
The purpose of this work is to define a sample preparation protocol that allows inorganic fibers and particulate matter extracted from different biological samples to be characterized morphologically, crystallographically and chemically by transmission electron microscopy-energy dispersive spectroscopy (TEM-EDS). The method does not damage or create artifacts through chemical attacks of the target material. A fairly rapid specimen preparation is applied with the aim of performing as few steps as possible to transfer the withdrawn inorganic matter onto the TEM grid. The biological sample is previously digested chemically by NaClO. The salt is then removed through a series of centrifugation and rinse cycles in deionized water, thus drastically reducing the digestive power of the NaClO and concentrating the fibers for TEM analysis. The concept of equivalent hydrodynamic diameter is introduced to calculate the settling velocity during the centrifugation cycles. This technique is applicable to lung tissues and can be extended to a wide range of organic materials. The procedure does not appear to cause morphological damage to the fibers or modify their chemistry or degree of crystallinity. The extrapolated data can be used in interdisciplinary studies to understand the pathological effects caused by inorganic materials.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cooper, John; McCreight, Dan J.
This project was undertaken to develop and demonstrate on a pilot scale the use of electro-osmotic transport to increase the efficiency of textiles wet processing operations. In particular, we sought to develop a means of rinsing textiles to remove material entrapped between the individual fibers that constitute a yarn. Material trapped within the yarn is slow to exchange with rinse water flowing primarily in the open weave are abetween the yarns. The application of an external field (strength, 5-50 kV /m) requires only a few volts for most fabric thicknesses. This field is sufficient to promote a rapid exchange ofmore » material to enhance rinsing and reduce the water required for rinsing from about 20 kg/kg-fabric to 3-6 kg/kg-fabric. We successfully developed technical and economic models of application of the process to the rinsing of many materials of industrial importance, including dyes, tints, chemicals, detergents and dye electrolytes. We demonstrated the process on a pilot plant scale using a translator designed in cooperation with Milliken and Company (Spartanburg, SC).« less
METHOD OF IMPROVING CORROSION RESISTANCE OF ZIRCONIUM
Shannon, D.W.
1961-03-28
An improved intermediate rinse for zirconium counteracts an anomalous deposit that often results in crevices and outof-the-way places when ordinary water is used to rinse away a strong fluoride etching solution designed to promote passivation of the metal. The intermediate rinse, which is used after the etching solution and before the water, is characterized by a complexing agent for fluoride ions such as aluminum or zirconium nitrates or chlorides.
A novel tank for DI water reduction in MEMS manufacturing
NASA Astrophysics Data System (ADS)
Raccurt, O.; Tardif, F.; Kerber, L.; Lardin, T.; Vareine, T.
2003-05-01
A new rinsing process is proposed based on the conclusions obtained by simulations. It consists of a combination of piston flows and internal top-to-bottom recycling steps, which decreases the DI water consumption (and associated cost) for the same rinsing efficiency. This novel concept re-using the DI water in situ in the rinsing tank is demonstrated using an industrial bath recently proposed on the market.
Treatment techniques for the recycling of bottle washing water in the soft drinks industry.
Ramirez Camperos, E; Mijaylova Nacheva, P; Diaz Tapia, E
2004-01-01
The soft drink production is an important sector in the manufacturing industry of Mexico. Water is the main source in the production of soft drinks. Wastewater from bottle washing is almost 50% of the total wastewater generated by this industry. In order to reduce the consumption of water, the water of the last bottle rinse can be reused in to the bottle pre-rinse and pre-washing cycles. This work presents the characterization of the final bottle washing rinse discharge and the treatability study for the most appropriate treatment system for recycling. Average characteristics of the final bottle wash rinse were as follows: Turbidity 40.46 NTU, COD 47.7 mg/L, TSS 56 mg/L, TS 693.6 mg/L, electrical conductivity 1,194 microS/cm. The results of the treatability tests showed that the final rinse water can be used in the pre-rinse and pre-washing after removing the totality of the suspended solids, 80% of the COD and 75% of the dissolved solids. This can be done using the following treatment systems: filtration-adsorption-reverse osmosis, or filtration-adsorption-ion exchange. The installation of these treatment techniques in the soft drink industry would decrease bottle washing water consumption by 50%.
Fathilah, A R; Himratul-Aznita, W H; Fatheen, A R N; Suriani, K R
2012-07-01
C. tropicalis and C. krusei have emerged as virulent species causing oral infections. Both have developed resistance to commonly prescribed azole antifungal agents. The study aimed to determine the effect of mouth rinses containing chlorhexidine digluconate (CHX), cetylpyridinium chloride (CPC) and their combination (CHX-CPC) on the growth of these strains. The minimal inhibition concentrations (MIC) of the mouth rinses were determined. The growth curves of the strains produced under the mouth rinse-treated and untreated conditions, as well as alterations to the morphology of the growth colonies and cells following the treatments were compared and analysed. The MICs of CPC compared to CHX mouth rinses were found to be lower for both Candida sp. In the mixed formulation, CPC doubled the inhibitory effect of CHX towards both Candida sp., while CHX quadrupled the activity of CPC towards C. tropicalis. The growth colonies also appeared coarse, wrinkled and dried. The profound effects shown may suggest the fungicidal activities of the mouth rinses incorporated with CHX, CPC or their combination on both C. tropicalis and C. krusei. Gargling using mouth rinses with such fungicidal activity would enhance a rapid reduction in the candidal population of patients with fungal infection. Copyright © 2012 Elsevier Ltd. All rights reserved.
In-vitro evidence for efficacy of antimicrobial mouthrinses
Pan, Pauline C.; Harper, Scott; Ricci-Nittel, Danette; Lux, Renate; Shi, Wenyuan
2010-01-01
SUMMARY Objectives The objective of this study was to compare the antimicrobial activity of commercially available antiseptic mouthrinses against saliva-derived plaque biofilms in static and flow-through biofilm systems in vitro. Methods Nine mouthrinses were tested in a recirculating flow-through biofilm model (RFTB) with viability assessment by ATP bioluminescence. In addition, five mouthrinses were evaluated in a batch chamber slide biofilm (BCSB) model, using live- dead staining and confocal laser scanning microscopy. Results In the RFTB model, essential oil (EO) and chlorhexidine (CHX)-containing rinses showed equivalent antimicrobial activity and were more effective than a range of cetyl pyridinium chloride (CPC1) formulations. In the BCSB model, twice-daily mouthrinse exposure demonstrated that the EO rinse was significantly more effective than rinses containing amine and stannous fluorides, a combination of CPC/CHX and CPC2. EO showed biofilm kill comparable to the CHX rinse. Conclusions The present studies have shown that mouthrinses vary significantly in their capability to kill plaque biofilm bacteria in BCSB and RFTB models. The EO mouthrinse demonstrated superior antiplaque biofilm activity to AFSF, CPC/CHX, and CPC rinses and comparable activity to CHX. The methods tested may be of value for the in-vitro screening of antiseptic rinses with different modes of antimicrobial action. PMID:20621239
Boonsarngsuk, Viboon; Kanoksil, Wasana; Laungdamerongchai, Sarangrat
2015-04-01
There are many sampling techniques dedicated to radial endobronchial ultrasound (R-EBUS) guided flexible bronchoscopy (FB). However, data regarding the diagnostic performances among bronchoscopic sampling techniques is limited. This study was conducted to compare the diagnostic yields among bronchoscopic sampling techniques in the diagnosis of peripheral pulmonary lesions (PPLs). A prospective study was conducted on 112 patients who were diagnosed with PPLs and underwent R-EBUS-guided FB between Oct 2012 and Sep 2014. Sampling techniques-including transbronchial biopsy (TBB), brushing cell block, brushing smear, rinsed fluid of brushing, and bronchoalveolar lavage (BAL)-were evaluated for the diagnosis. The mean diameter of the PPLs was 23.5±9.5 mm. The final diagnoses included 76 malignancies and 36 benign lesions. The overall diagnostic yield of R-EBUS-guided bronchoscopy was 80.4%; TBB gave the highest yield among the 112 specimens: 70.5%, 34.8%, 62.5%, 50.0% and 42.0% for TBB, brushing cell block, brushing smear, rinsed brushing fluid, and BAL fluid (BALF), respectively (P<0.001). TBB provided high diagnostic yield irrespective of the size and etiology of the PPLs. The combination of TBB and brushing smear achieved the maximum diagnostic yield. Of 31 infectious PPLs, BALF culture gave additional microbiological information in 20 cases. TBB provided the highest diagnostic yield; however, to achieve the highest diagnostic performance, TBB, brushing smear and BAL techniques should be performed together.
Lin, Jin-Xiang; Fan, Zu-Yan; Lin, Qu; Wu, Dong-Hao; Wu, Xiang-Yuan; Chen, Yan-Ru; Fang, Heng-Ying; Wu, Dong-Bing; Wen, Jing-Yun; Dong, Min; Ma, Xiao-Kun; Wan, Xiang-Bo
2015-04-01
To compare the efficacy of dioctahedral smectite and iodine glycerin (DSIG) cream with topical mouth rinse (composed of saline, gentamicin and Vitamin B12) in treatment of chemotherapy induced oral mucositis (OM). A total of 130 intensive chemotherapy or stem cells transplantation induced OM patients were recruited. Among these patients, 67 patients received topical mouth rinse and 63 patients received DSIG cream treatment. The OM would be treated on the OM appearance and sustained for 5 days. OM severity was measured daily using The American Oncology Nursing Society recommended Oral Assessment Guideline (OAG) score system. Compared with topical mouth rinse treatment, a significant lower OAG score was observed in DSIG cream treated patients. Specifically, the OAG scores were respectively 12.1 ± 1.1, 12.0 ± 1.2, 11.3 ± 1.3 and 10.4 ± 1.3 from day 2 to day 5 in topical mouth rinse treatment subgroup. Correspondingly, the OAG scores were respectively 10.2 ± 1.0, 9.3 ± 0.9, 8.5 ± 0.6 and 8.0 ± 0.2 for DSIG cream treatment subset (all P < 0.05). Importantly, compared with topical mouth rinse treatment, the DSIG cream significantly shortened OM repair time (4.68 ± 0.98 vs. 8.76 ± 1.80 days, P < 0.001). After 5 days treatment, 54 patients (85.7%) obtained complete regression with an OAG score ≤8, and 7 patients (11.1%) had partial regression with an OAG score of 9-10 in DSIG cream treatment subgroup. However, only 2 patients (3.0%) obtained completed regression and 32 patients (47.8%) had partial regression in topical mouth rinse treatment cohort. Moreover, no serious side-effect was observed in both cohorts. Compared with topical mouth rinse, DSIG cream significantly lowered the OAG score and shortened OM duration. Copyright © 2014 Elsevier Ltd. All rights reserved.
Water purification using organic salts
Currier, Robert P.
2004-11-23
Water purification using organic salts. Feed water is mixed with at least one organic salt at a temperature sufficiently low to form organic salt hydrate crystals and brine. The crystals are separated from the brine, rinsed, and melted to form an aqueous solution of organic salt. Some of the water is removed from the aqueous organic salt solution. The purified water is collected, and the remaining more concentrated aqueous organic salt solution is reused.
Kim, Bo-Ram; Oh, Man-Hwan; Shin, Dong-Hoon
2017-05-31
This study was performed to compare the antibacterial activities of three cavity disinfectants [chlorhexidine (CHX), NaOCl, urushiol] and to evaluate their effect on the microtensile bond strength of Scotchbond Universal Adhesive (3M-ESPE, St. Paul, MN, USA) in class I cavities. In both experiments, class I cavities were prepared in dentin. After inoculation with Streptococcus mutans, the cavities of control group were rinsed and those of CHX, NaOCl and urushiol groups were treated with each disinfectant. Standardized amounts of dentin chips were collected and number of S. mutans was determined. Following the same cavity treatment, same adhesive was applied in etch-and-rinse mode. Then, microtensile bond strength was evaluated. The number of S. mutans was significantly reduced in the cavities treated with CHX, NaOCl, and urushiol compared with control group (p<0.05). However, there was a significant bond strength reduction in NaOCl group, which showed statistical difference compared to the other groups (p<0.05).
Postmarketing surveillance study of permethrin creme rinse.
Andrews, E B; Joseph, M C; Magenheim, M J; Tilson, H H; Doi, P A; Schultz, M W
1992-06-01
An observational, epidemiological study was undertaken to evaluate the safety of permethrin 1% creme rinse (Nix) for treatment of head lice infestations. Thirty-seven local public health departments enrolled a total of 38,160 patients for 47,578 treatments with permethrin or other pediculicides from September 1, 1986, through January 31, 1988. Follow-up safety information was collected between 7 and 14 days following treatment via return visit or telephone contact. One hundred three adverse events were reported among 41,955 evaluable treatments. The rates of reported adverse events were 2.2 per 1000 treatments among permethrin treatments, 3.4 per 1000 treatments among lindane treatments, and 1.5 per 1000 treatments among other over-the-counter treatments. No serious, unexpected adverse events were detected in the 18,950 patients treated with permethrin. This study confirmed the safety profile of permethrin in conditions of general use, as seen in clinical trials. Postmarketing safety monitoring in public health departments of drugs used to treat public health conditions was shown to be feasible.
Feres, Magda; Figueiredo, Luciene Cristina; Faveri, Marcelo; Stewart, Bernal; de Vizio, William
2010-04-01
During oral procedures, microorganisms from the oral cavity may contaminate nearby surfaces. The authors evaluated the efficacy of a commercial preprocedural mouthrinse containing 0.05 percent cetylpyridinium chloride (CPC) in reducing the levels and composition of viable bacteria in oral spatter. The authors randomly assigned 60 participants receiving oral prophylaxis with an ultrasonic scaler to one of four groups: a preprocedural rinse solution containing 0.05 percent CPC, 0.12 percent chlorhexidine (CHX) or water, or no rinsing. Airborne microorganisms were collected on blood agar plates. The composition of the spatter was analyzed for 39 oral bacterial species by means of checkerboard DNA-DNA hybridization. CPC and CHX were equally effective in lowering the levels of spatter bacteria and performed better than water and no rinsing (P < .05, Kruskal-Wallis test). The composition of the spatter from the control groups showed higher proportions (P < .05, Kruskal-Wallis test) of Fusobacterium species and lower proportions of Capnocytophaga species when compared with the spatter from the CPC and CHX groups. A commercial mouthrinse containing 0.05 percent CPC when used as a preprocedural mouthrinse was equally effective as CHX in reducing the levels of spatter bacteria generated during ultrasonic scaling. Owing to its strong antibacterial effect and the fact that it has fewer side effects than CHX, a solution containing 0.05 percent CPC may be a good alternative to that containing 0.12 CHX as a preprocedural mouthrinse used to help decrease the level of contamination in spatter.
van Niekerk, J K; Middeldorp, M; Steele, M A
2018-05-09
The objectives of this study were to develop a methodology for biopsying the rumen and colon of young dairy calves and to collect suitable quality tissue samples for microscopic and gene expression analysis. Six Holstein dairy bull calves (45.0 ± 1.5 kg birth weight) were ruminally cannulated during the second week of life and weaned at the end of wk 6. Ruminal and colon tissue samples were collected at the end of wk 5, 6, 7, 8, and 12. Calves were not sedated but were restrained in a chute for sampling. The endoscope (100 cm length, 9.8 mm diameter) was introduced through the rumen cannula to harvest ruminal tissue. Endoscopic biopsies of the rumen with endoscopic biopsy forceps were unsuccessful 85% of the time because they were unable to shear the ruminal tissue. Thereafter, an Allis clamp was used to retrieve the blind sac through the rumen cannula to perform direct tissue biopsying with surgical scissors. To biopsy the colon, the lubricated distal tip of an endoscope was slowly inserted into the calf's anus. A total of 6 colon tissue samples (12.6 ± 0.74 mg) were collected per calf per time point from the distal colon 30 to 40 cm from the calf's anus using endoscopic biopsy forceps, which were inserted through the instrument channel. A new forcep was used between sites and calves. Between calves, the outside of the endoscope was washed with 4% chlorohexidine and rinsed with water and the instrument channel was washed with distilled water and 70% ethanol. Colon and ruminal samples were processed for histological measurements, and RNA was isolated and sequenced. High-quality RNA (RNA integrity number 8.8 ± 0.08) was collected from samples, and light and electron microscopy was performed on samples. In conclusion, endoscopic biopsying can be used for tissue harvest in the colon of young calves. However, it was found that collecting ruminal tissue by retracting the rumen from the cannula and taking samples with surgical scissors was more successful than an endoscopic biopsy. This method allows for tissue collection of the same animal throughout time, which can help the research community investigate the effect of weaning regimens, feed rations, and age on the structure and function of the gastrointestinal tract. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Arima, Hiroshi; Yoshida, Yuichi; Yoshihara, Kosuke; Shibata, Tsuyoshi; Kushida, Yuki; Nakagawa, Hiroki; Nishimura, Yukio; Yamaguchi, Yoshikazu
2009-03-01
Residue type defect is one of yield detractors in lithography process. It is known that occurrence of the residue type defect is dependent on resist development process and the defect is reduced by optimized rinsing condition. However, the defect formation is affected by resist materials and substrate conditions. Therefore, it is necessary to optimize the development process condition by each mask level. Those optimization steps require a large amount of time and effort. The formation mechanism is investigated from viewpoint of both material and process. The defect formation is affected by resist material types, substrate condition and development process condition (D.I.W. rinse step). Optimized resist formulation and new rinse technology significantly reduce the residue type defect.
Pristine Stratospheric Collections of Cosmic Dust
NASA Technical Reports Server (NTRS)
Messenger, S.; Keller, L. P.; Nakamura-Messenger, K.; Clemett, S. J.
2012-01-01
Since 1981, NASA has routinely collected interplanetary dust particles (IDPs) in the stratosphere by inertial impact onto silicone oil-coated flat plate collectors deployed on the wings of high-altitude aircraft [1]. The highly viscous oil traps and localizes the particles, which can fragment during collection. Particles are removed from the collectors with a micromanipulator and washed of the oil using organic solvents, typically hexane or xylene. While silicone oil is an efficient collection medium, its use is problematic. All IDPs are initially coated with this material (polydimethylsiloxane, n(CH3)2SiO) and traces of oil may remain after cleaning. The solvent rinse itself is also a concern as it likely removes indigenous organics from the particles. To avoid these issues, we used a polyurethane foam substrate for the oil-free stratospheric collection of IDPs.
EVALUATION OF FACTORS IN THE ELUTION OF HYDROCORTISONE FROM PAPER CHROMATOGRAMS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ganis, F.M.; Hendrickson, M.W.; Giunta, P.D.
An assessment was made of a number of variable factors which affect the recovery of hydrocortisone from eluted filter paper chromatographic fractions. Factors tested included time of elution, sample concentration, rinsing of eluting fractions and pre-washing of the filter paper. It was noted that a 50 mu g sample could be quantitatively recovered after a 15-minute elution time from a pre-washed filter paper fraction. The results were subjected to a statistical analysis and were found to be highly significant. (auth)
Prevalence of Salmonella on retail chicken meat in Russian Federation.
Alali, Walid Q; Gaydashov, Roman; Petrova, Elena; Panin, Alexander; Tugarinov, Oleg; Kulikovskii, Alexander; Mamleeva, Dzhemile; Walls, Isabel; Doyle, Michael P
2012-08-01
The objective of this study was to estimate the prevalence of Salmonella on raw retail chicken meat in Russia. Broiler chicken carcasses (n = 698) were collected from three regions of Russia: central (i.e., Moscow area), northwest (i.e., St. Petersburg area), and southern (i.e., Krasnodar area). In each region, samples were collected to represent various cities and districts, as well as different types of retail stores and carcass storage temperatures (i.e., chilled and frozen). All chicken samples were analyzed for the presence of Salmonella using a whole-carcass rinse method. The overall Salmonella prevalence was 31.5%. There were significant differences (P < 0.05) in Salmonella prevalence by (i) region-29.3% (n = 464) in Moscow, 38.5% (n = 192) in St. Petersburg, and 23.8% (n = 42) in Krasnodar; (ii) retail store type-28.8% (n = 236) in hypermarkets, 31.9% (n = 260) in supermarkets (part of chain stores), 44.3% (n = 61) in independent supermarkets, 42.9% (n = 28) in independent minimarkets, and 26.6% (n = 113) in wet markets; and (iii) poultry company-34.3% (n = 545) on chickens produced by integrated companies compared with 22.9% (n = 118) on chickens produced by nonintegrated companies. Strategies such as good agriculture and management practices should be enhanced to reduce Salmonella prevalence on raw poultry in Russia and therefore increase the safety of chicken products.
Kilvington, Simon; Lonnen, James
2009-04-01
To compare the antimicrobial efficacy of commercial contact lens solutions when used according to the manufacturers' recommended regimens with two types of silicone hydrogel lenses. Four multipurpose contact lens care solutions were examined, representing manufacturer recommended regimens of "rub & rinse", "no rub, rinse" or "no rub, no rinse". Test organisms were Pseudomonas aeruginosa, Serratia marcescens, Staphylococcus aureus, Fusarium solani, Candida albicans and Acanthamoeba castellanii (trophozoites and cysts). Organisms, in the presence of organic soil, were inoculated on to Acuvue Oasys or Air Optix lenses and subjected to the solution manufacturer's recommended regimen. The number of surviving organisms on the lenses and in the soak solution was enumerated in accordance with ISO 14729. ISO 14729 dictates that for a given organism the combined average number of surviving microbes from the lenses and disinfectant soaking solution must be
Lorenz, Katrin; Jockel-Schneider, Yvonne; Petersen, Nicole; Stölzel, Peggy; Petzold, Markus; Vogel, Ulrich; Hoffmann, Thomas; Schlagenhauf, Ulrich; Noack, Barbara
2018-03-02
This bi-centric, placebo-controlled, randomized, evaluator-blinded, incomplete cross-over clinical phase II trial was initialized to identify the most appropriate concentration of octenidine dihydrochloride (OCT) in mouth rinses. Rinses of 0.10, 0.15, and 0.20% OCT were compared to a saline placebo rinse regarding the reduction of salivary bacterial counts (SBCs) in 90 gingivitis patients over 4 days. Changes in plaque (PI) and gingival index (GI), taste perception, and safety issues were evaluated. At baseline, the first OCT (0.10, 0.15, 0.20%) rinse resulted in a decrease of SBC (reduction by 3.63-5.44 log 10 colony forming units [CFU]) compared to placebo (p < 0.001). Differences between OCT concentrations were not verified. After 4 days, the last OCT rinse again resulted in a significant SBC decrease (3.69-4.22 log 10 CFU) compared to placebo (p < 0.001). Overall, SBC reduction between baseline and day 4 was significantly higher in OCT 0.15 and 0.20% groups compared to OCT 0.10% and placebo. Mean GI/PIs were significantly lower in OCT groups than in the placebo group (p < 0.001). Differences in GI/PI between OCT groups were not verified. Adverse effects increased with increasing OCT concentrations. Considering antibacterial efficacy, frequency of adverse events, and user acceptance, 0.10% OCT was identified as the preferred concentration to be used in future clinical trials. Due to its low toxicity and pronounced antibacterial properties, octenidine dihydrochloride (OCT) is a promising candidate for the use in antiseptic mouth rinses. OCT concentrations of 0.10% are recommended for future clinical trials evaluating the plaque-reducing properties of OCT mouth rinses. ( www.clinicaltrials.gov , NCT022138552).
Cho, Han-Bin; Lee, Hee-Hyun; Lee, Ok-Hwan; Choi, Hyeon-Son; Choi, Jae-Suk
2011-01-01
Abstract Enteromorpha linza, a green alga, has been recognized as a potential source of natural antimicrobial and antifungal compounds. We previously reported that an E. linza extract strongly inhibited the growth of Prevotella intermedia and Porphyromonas gingivalis. The principal objective of this study was to evaluate the clinical effect of a mouth rinse containing the E. linza extract on gingivitis disease, as measured by the plaque index (PI), gingival index (GI), and bleeding on probing (BOP), and on two bacterial strains (P. intermedia and P. gingivalis), in comparison with Listerine® (Listerine-Korea, Seoul, Korea), which was used as a positive control. In total, 55 subjects were recruited into active participation in this clinical study. The PI, GI, BOP, and bacterial strains were then evaluated over a test period of 6 weeks. After 1, 2, 4, and 6 weeks, the same clinical indices were recorded, and the levels of P. intermedia and P. gingivalis were quantified via real-time polymerase chain reaction. At the end of the study, the group using the mouth rinse containing the E. linza extract evidenced significant reductions in the clinical indices (PI, GI, and BOP) and P. gingivalis compared with baseline values. Moreover, E. linza extract containing mouth rinse produced effects similar to those of Listerine. Overall, these results indicate that a mouth rinse containing E. linza extract significantly reduces plaque, improves the condition of gingival tissues, and reduces bleeding. Additionally, E. linza extract mouth rinse significantly inhibits P. gingivalis and P. intermedia. Thus, this clinical study demonstrated that the twice-daily use of an E. linza extract mouth rinse can inhibit and prevent gingivitis. PMID:22145775
... your hands. Clean the affected area with mild soap and warm water. Rinse thoroughly. Pat affected area ... your hands. Clean affected rectal area with mild soap and warm water. Rinse thoroughly. Gently dry by ...
Method of drying passivated micromachines by dewetting from a liquid-based process
Houston, Michael R.; Howe, Roger T.; Maboudian, Roya; Srinivasan, Uthara
2000-01-01
A method of fabricating a micromachine includes the step of constructing a low surface energy film on the micromachine. The micromachine is then rinsed with a rinse liquid that has a high surface energy, relative to the low surface energy film, to produce a contact angle of greater than 90.degree. between the low surface energy film and the rinse liquid. This relatively large contact angle causes any rinse liquid on the micromachine to be displaced from the micromachine when the micromachine is removed from the rinse liquid. In other words, the micromachine is dried by dewetting from a liquid-based process. Thus, a separate evaporative drying step is not required, as the micromachine is removed from the liquid-based process in a dry state. The relatively large contact angle also operates to prevent attractive capillary forces between micromachine components, thereby preventing contact and adhesion between adjacent microstructure surfaces. The low surface energy film may be constructed with a fluorinated self-assembled monolayer film. The processing of the invention avoids the use of environmentally harmful, health-hazardous chemicals.
Pahwa, Narinder; Kumar, Atul; Gupta, Siddharth
2011-07-01
To test the short term clinical effectiveness of commercially available 0.07%.cetylpyridinium chloride mouth rinse in patients undergoing fixed orthodontic treatment as compared to a placebo mouth rinse and patients using toothbrush and toothpaste. Forty-five subjects for this double blind study were assigned randomly into three groups of 15 each. Gingival inflammation, plaque accumulation, and bleeding on probing, were recorded at baseline (10 days after prophylaxis), and at the end of one month in all the three groups and compared. Paired t test showed significant differences in bleeding index for pre and post treatment recordings for cetylpyridinium group. Modified gingival index showed no significant difference in the cetylpyridinium group. For plaque index significant difference was found for cetylpyridinium and control groups. Cetylpyridinium mouth rinse 0.7% was found to be effective in reducing the bleeding and plaque index scores. It was not effective in reducing the modified gingival index scores. Cetylpyridinium mouth rinse 0.07% improves the oral hygiene of orthodontic patients when used as an adjunct to normal oral hygiene measures.
... needed to determine whether a single- or multiple-blade razor is best for preventing ingrown hair. See ... in the direction of hair growth. Rinse the blade after each stroke. Rinse your skin and apply ...
Evaluation of the Antimicrobial Functions of N-halamine Dental Unit Waterline Tubing for One Year.
Porteous, N; Dang, S; Schoolfield, J; Sun, Y
2016-03-01
The objective of this study was to test the biofilm-controlling properties of N-halamine antimicrobial dental unit waterline (DUWL) tubing (T) tubing, without recharging over one year, compared to a control line (C). A simulated clinical model was used to pump ultrapure water through T and C lines at a rate of 1.4 mL/min, five minutes on, 15 minutes off, eight hours/day, five days a week. Samples of source water, effluent from T and C, and from the stagnant water in the carboy (liquid container) after bench work was completed (S2), were collected aseptically, serially diluted, and cultured on R2A agar for seven days every six weeks. SEM images of the inside surfaces of detached tubing sections were also taken. The carboy was rinsed with a 1:10 dilution of sodium hypochlorite after six months. Means of log transformed CFU values obtained in triplicate were paired by T and C lines across months for comparison by paired Student's t-tests. An increase in effluent and carboy bacterial counts were noted after six months, but decreased after bleach rinse of the carboy. No significant difference (p > 0.25) between T and C lines were observed; similarly, T and carboy were not significantly different (p > 0.30). SEM images showed biofilm attachment on the inside surface of C after two months, but not on T. Organisms identified in the effluent reflected those in the source carboy. No biofilm attachment was detected on the N-halamine test line after 12 months, indicating its antimicrobial properties were retained. Further evaluation is recommended to determine the optimal recharge interval for N-halamine DUWL tubing when ultrapure source water is used.
Evaluation of the Antimicrobial Functions of N-halamine Dental Unit Waterline Tubing for One Year
Porteous, N.; Dang, S.; Schoolfield, J.; Sun, Y.
2017-01-01
Objective The objective of this study was to test the biofilm-controlling properties of N-halamine antimicrobial dental unit waterline (DUWL) tubing (T) tubing, without recharging over one year, compared to a control line (C). Methods A simulated clinical model was used to pump ultrapure water through T and C lines at a rate of 1.4 mL/min, five minutes on, 15 minutes off, eight hours/day, five days a week. Samples of source water, effluent from T and C, and from the stagnant water in the carboy (liquid container) after bench work was completed (S2), were collected aseptically, serially diluted, and cultured on R2A agar for seven days every six weeks. SEM images of the inside surfaces of detached tubing sections were also taken. The carboy was rinsed with a 1:10 dilution of sodium hypochlorite after six months. Means of log transformed CFU values obtained in triplicate were paired by T and C lines across months for comparison by paired Student’s t-tests. Results An increase in effluent and carboy bacterial counts were noted after six months, but decreased after bleach rinse of the carboy. No significant difference (p > 0.25) between T and C lines were observed; similarly, T and carboy were not significantly different (p > 0.30). SEM images showed biofilm attachment on the inside surface of C after two months, but not on T. Organisms identified in the effluent reflected those in the source carboy. Conclusions No biofilm attachment was detected on the N-halamine test line after 12 months, indicating its antimicrobial properties were retained. Further evaluation is recommended to determine the optimal recharge interval for N-halamine DUWL tubing when ultrapure source water is used. PMID:28390212
Evaluation of salivary fluoride retention from a new high fluoride mouthrinse.
Mason, Stephen C; Shirodaria, Soha; Sufi, Farzana; Rees, Gareth D; Birkhed, Dowen
2010-11-01
To evaluate salivary fluoride retention from a new high fluoride daily use mouthrinse over a 120 min period. Sixteen subjects completed a randomised single-blind, four-treatment cross-over trial. Sensodyne® Pronamel® mouthrinse (A) contained 450 ppm fluoride; reference products were Colgate® Fluorigard® (B), Listerine® Total Care (C) and Listerine Softmint Sensation (D) containing 225, 100 and 0 ppm fluoride respectively. Salivary fluoride retention was monitored ex vivo after a single supervised use of test product (10 mL, 60 s). Samples were collected at 0, 1, 3, 5, 15, 30, 60 and 120 min post-rinse, generating fluoride clearance curves from which the area under the curve (AUC) was calculated. Differences in salivary fluoride concentrations for each product were analysed using ANCOVA at each time point using a 5% significance level, as well as lnAUC for the periods 0-120, 0-1, 1-15, 15-60 and 60-120 min. Pairwise comparisons between all treatment groups were performed. Salivary fluoride levels for A-C peaked immediately following use. Fluoride levels were statistically significantly higher for A versus B-D (p≤ 0.004), linear dose responses were apparent. AUC(0-120) was statistically significantly greater for A than for B (p = 0.035), C (p< 0.0001) and D (p< 0.0001). Post-hoc comparisons of lnAUC for the remaining time domains showed fluoride retention from A was statistically significantly greater versus B-D (p< 0.0001). Single-use treatment with the new mouthrinse containing 450 ppm fluoride resulted in statistically significantly higher salivary fluoride levels throughout the 120 min test period. Total fluoride retention (AUC(0-120)) was also statistically significantly greater versus comparator rinse treatments. Copyright © 2010 Elsevier Ltd. All rights reserved.
Grossman, M.W.; Speer, R.; George, W.A.
1991-04-09
The effluent from mercury collected during the photochemical separation of the [sup 196]Hg isotope is often contaminated with particulate mercurous chloride, Hg[sub 2]Cl[sub 2]. The use of mechanical filtering via thin glass tubes, ultrasonic rinsing with acetone (dimethyl ketone) and a specially designed cold trap have been found effective in removing the particulate (i.e., solid) Hg[sub 2]Cl[sub 2] contaminant. The present invention is particularly directed to such filtering. 5 figures.
Apparatus for mercury refinement
Grossman, M.W.; Speer, R.; George, W.A.
1991-07-16
The effluent from mercury collected during the photochemical separation of the [sup 196]Hg isotope is often contaminated with particulate mercurous chloride, Hg[sub 2]Cl[sub 2]. The use of mechanical filtering via thin glass tubes, ultrasonic rinsing with acetone (dimethyl ketone) and a specially designed cold trap have been found effective in removing the particulate (i.e., solid) Hg[sub 2]Cl[sub 2] contaminant. The present invention is particularly directed to such filtering. 5 figures.
Apparatus for mercury refinement
Grossman, Mark W.; Speer, Richard; George, William A.
1991-01-01
The effluent from mercury collected during the photochemical separation of the .sup.196 Hg isotope is often contaminated with particulate mercurous chloride, Hg.sub.2 Cl.sub.2. The use of mechanical filtering via thin glass tubes, ultrasonic rinsing with acetone (dimethyl ketone) and a specially designed cold trap have been found effective in removing the particulate (i.e., solid) Hg.sub.2 Cl.sub.2 contaminant. The present invention is particularly directed to such filtering.
Grossman, Mark W.; Speer, Richard; George, William A.
1991-01-01
The effluent from mercury collected during the photochemical separation of the .sup.196 Hg isotope is often contaminated with particulate mercurous chloride, Hg.sub.2 Cl.sub.2. The use of mechanical filtering via thin glass tubes, ultrasonic rinsing with acetone (dimethyl ketone) and a specially designed cold trap have been found effective in removing the particulate (i.e., solid) Hg.sub.2 Cl.sub.2 contaminant. The present invention is particularly directed to such filtering.
A Process Elaboration Formalism for Writing and Analyzing Programs
1975-10-01
program is to be proved, a description of its (i) See [MANN 73] for a survey of these debugging tools, di) See [ELSPAS 72] for a complete review of this...öy the instructions which might be found on a shampoo bottle. 1) Wet hair 2) Lather 3) Rinse «) Repeat Statement 4, the source of the problem, *M...tor this simple aigonthm is shown m Figure 52. SHAMPOO WET-HAIR LATHER RINSE REPEAT - WET-HAIR -> LATHER -> RINSE -> REPEAT - (TCRMMAL "WE’T.’NG
Zhang, Y; Wang, K; Arendt-Nielsen, L; Cairns, B E
2018-02-01
In burning mouth patients, analgesia after oral administration of clonazepam may result from modulation of peripheral γ-aminobutyric acid (GABA) receptors. The effect of oral administration of test solutions (water, 0.5 mol/L or 0.05 mol/L GABA, 1% lidocaine) was investigated for the amelioration of pain and sensitivity induced by application of capsaicin (1%, 2 min) to the tongue of thirty healthy male and female subjects in this four-session, randomized, placebo-controlled, double-blinded, cross-over study. Intra-oral quantitative sensory testing was used to assess cold (CDT), warm (WDT) and mechanical (MDT) detection thresholds as well as mechanical (MPT) and heat (HPT) pain thresholds. Capsaicin-induced pain intensity was continuously rated on a 0-10 electronic visual analogue scale (VAS). The area under the VAS curve (VASAUC) after rinsing was calculated for each solution. Capsaicin application on the tongue evoked burning pain with a peak of 4.8/10, and significantly increased CDT and MDT while significantly decreasing WDT, HPT, and MPT. The VASAUC was significantly smaller after oral rinse with 0.05 mol/L GABA, 0.5 mol/L GABA, and 1% lidocaine than after oral rinse with water. Rinse with 0.5 mol/L or 0.05 mol/L GABA were similarly effective in decreasing VASAUC. Rinsing with either 1% lidocaine, 0.5 mol/L or 0.05 mol/L GABA also significantly attenuated the effects of capsaicin on WDT and HPT in a treatment independent manner. There were no sex-related differences in these effects of GABA. Capsaicin-induced burning tongue pain and decreases in WDT and HPT can be ameliorated by rinsing the mouth with lidocaine and GABA solutions. Rinsing the mouth with an oral GABA containing solution ameliorated burning pain and increased heat sensitivity produced by application of capsaicin to the tongue. This finding suggests that GABA can act as a local analgesic agent in the oral cavity. © 2017 European Pain Federation - EFIC®.
Polymeric Mold For Providing A Microscale Part
Boehme, Dale R.; Bankert, Michelle A.; Christenson, Todd R.
2005-01-11
The invention is a developer system for developing a PMMA photoresist having exposed patterns comprising features having both very small sizes, and very high aspect ratios. The developer system of the present invention comprises a developer tank, an intermediate rinse tank and a final rinse tank, each tank having a source of high frequency sonic agitation, temperature control, and continuous filtration. It has been found that by moving a patterned wafer, through a specific sequence of developer/rinse solutions, where an intermediate rinse solution completes development of those portions of the exposed resist left undeveloped after the development solution, by agitating the solutions with a source of high frequency sonic vibration, and by adjusting and closely controlling the temperatures and continuously filtering and recirculating these solutions, it is possible to maintain the kinetic dissolution of the exposed PMMA polymer as the rate limiting step.
Kulaksız, Tuğba Nilay; Koşar, Şükran Nazan; Bulut, Suleyman; Güzel, Yasemin; Willems, Marcus Elisabeth Theodorus; Hazir, Tahir; Turnagöl, Hüseyin Hüsrev
2016-05-09
The carbohydrate (CHO) concentration of a mouth rinsing solution might influence the CHO sensing receptors in the mouth, with consequent activation of brain regions involved in reward, motivation and regulation of motor activity. The purpose of the present study was to examine the effects of maltodextrin mouth rinsing with different concentrations (3%, 6% and 12%) after an overnight fast on a 20 km cycling time trial performance. Nine recreationally active, healthy males (age: 24 ± 2 years; V ˙ O 2 m a x : 47 ± 5 mL·kg(-1)·min(-1)) participated in this study. A double-blind, placebo-controlled randomized study was conducted. Participants mouth-rinsed every 2.5 km for 5 s. Maltodextrin mouth rinse with concentrations of 3%, 6% or 12% did not change time to complete the time trial and power output compared to placebo (p > 0.05). Time trial completion times were 40.2 ± 4.0, 40.1 ± 3.9, 40.1 ± 4.4, and 39.3 ± 4.2 min and power output 205 ± 22, 206 ± 25, 210 ± 24, and 205 ± 23 W for placebo, 3%, 6%, and 12% maltodextrin conditions, respectively. Heart rate, lactate, glucose, and rating of perceived exertion did not differ between trials (p > 0.05). In conclusion, mouth rinsing with different maltodextrin concentrations after an overnight fast did not affect the physiological responses and performance during a 20 km cycling time trial in recreationally active males.
The impact of chlorhexidine mouth rinse on the bond strength of polycarbonate orthodontic brackets.
Hussein, Farouk Ahmed; Hashem, Mohammed Ibrahim; Chalisserry, Elna P; Anil, Sukumaran
2014-11-01
The purpose of the current in-vivo study was to assess the effect of using 0.12% chlorhexidine (CHX) mouth rinse, before bonding, on shear bond strength of polycarbonate brackets bonded with composite adhesive. Eighteen orthodontic patients with a mean age 21.41 ± 1.2 years, who were scheduled to have 2 or more first premolars extracted, were included in this study. Patients were referred for an oral prophylaxis program which included, in part, the use of a mouth rinse. Patients were divided into 2 groups, a test group of 9 patients who used 0.12% CHX gluconate mouth rinse twice daily and a control group of 9 patients who used a mouth rinse without CHX, but with same color. After 1 week, polycarbonate brackets were bonded to first premolars with Transbond XT composite adhesive. Premolars were extracted after 28 days and tested for shear bond strength on a universal testing machine. Student's t-test was used to compare shear bond strengths of both groups. No statistically significant difference was found in bond strengths' values between both groups. The test group (with CHX) has mean shear bond strength of 14.21 ± 2.42 MPa whereas the control group (without CHX) revealed a mean strength of 14.52 ± 2.31 MPa. The use of 0.12% CHX mouth rinse, for one week before bonding, did not affect the shear bond strength of polycarbonate brackets bonded with Transbond composite. Furthermore, these brackets showed clinically acceptable bond strength.
Holvoet, Kevin; Sampers, Imca; Seynnaeve, Marleen; Jacxsens, Liesbeth; Uyttendaele, Mieke
2014-01-01
The aim of this study was to gain insight into potential differences in risk factors for microbial contamination in greenhouse versus open field lettuce production. Information was collected on sources, testing, and monitoring and if applicable, treatment of irrigation and harvest rinsing water. These data were combined with results of analysis on the levels of Escherichia coli as a fecal indicator organism and the presence of enteric bacterial pathogens on both lettuce crops and environmental samples. Enterohemorragic Escherichia coli (EHEC) PCR signals (vt1 or vt2 positive and eae positive), Campylobacter spp., and Salmonella spp. isolates were more often obtained from irrigation water sampled from open field farms (21/45, 46.7%) versus from greenhouse production (9/75, 12.0%). The open field production was shown to be more prone to fecal contamination as the number of lettuce samples and irrigation water with elevated E. coli was significantly higher. Farmers comply with generic guidelines on good agricultural practices available at the national level, but monitoring of microbial quality, and if applicable appropriateness of water treatment, or water used for irrigation or at harvest is restricted. These results indicate the need for further elaboration of specific guidelines and control measures for leafy greens with regard to microbial hazards. PMID:25546272
Holvoet, Kevin; Sampers, Imca; Seynnaeve, Marleen; Jacxsens, Liesbeth; Uyttendaele, Mieke
2014-12-23
The aim of this study was to gain insight into potential differences in risk factors for microbial contamination in greenhouse versus open field lettuce production. Information was collected on sources, testing, and monitoring and if applicable, treatment of irrigation and harvest rinsing water. These data were combined with results of analysis on the levels of Escherichia coli as a fecal indicator organism and the presence of enteric bacterial pathogens on both lettuce crops and environmental samples. Enterohemorragic Escherichia coli (EHEC) PCR signals (vt1 or vt2 positive and eae positive), Campylobacter spp., and Salmonella spp. isolates were more often obtained from irrigation water sampled from open field farms (21/45, 46.7%) versus from greenhouse production (9/75, 12.0%). The open field production was shown to be more prone to fecal contamination as the number of lettuce samples and irrigation water with elevated E. coli was significantly higher. Farmers comply with generic guidelines on good agricultural practices available at the national level, but monitoring of microbial quality, and if applicable appropriateness of water treatment, or water used for irrigation or at harvest is restricted. These results indicate the need for further elaboration of specific guidelines and control measures for leafy greens with regard to microbial hazards.
Effects of shampoo and water washing on hair cortisol concentrations.
Hamel, Amanda F; Meyer, Jerrold S; Henchey, Elizabeth; Dettmer, Amanda M; Suomi, Stephen J; Novak, Melinda A
2011-01-30
Measurement of cortisol in hair is an emerging biomarker for chronic stress in human and nonhuman primates. Currently unknown, however, is the extent of potential cortisol loss from hair that has been repeatedly exposed to shampoo and/or water. Pooled hair samples from 20 rhesus monkeys were subjected to five treatment conditions: 10, 20, or 30 shampoo washes, 20 water-only washes, or a no-wash control. For each wash, hair was exposed to a dilute shampoo solution or tap water for 45 s, rinsed 4 times with tap water, and rapidly dried. Samples were then processed for cortisol extraction and analysis using previously published methods. Hair cortisol levels were significantly reduced by washing, with an inverse relationship between number of shampoo washes and the cortisol concentration. This effect was mainly due to water exposure, as cortisol levels following 20 water-only washes were similar to those following 20 shampoo treatments. Repeated exposure to water with or without shampoo appears to leach cortisol from hair, yielding values that underestimate the amount of chronic hormone deposition within the shaft. Collecting samples proximal to the scalp and obtaining hair washing frequency data may be valuable when conducting human hair cortisol studies. Copyright © 2010 Elsevier B.V. All rights reserved.
Jonges, Marcel; van Leuken, Jeroen; Wouters, Inge; Koch, Guus; Meijer, Adam; Koopmans, Marion
2015-01-01
Avian influenza virus-infected poultry can release a large amount of virus-contaminated droppings that serve as sources of infection for susceptible birds. Much research so far has focused on virus spread within flocks. However, as fecal material or manure is a major constituent of airborne poultry dust, virus-contaminated particulate matter from infected flocks may be dispersed into the environment. We collected samples of suspended particulate matter, or the inhalable dust fraction, inside, upwind and downwind of buildings holding poultry infected with low-pathogenic avian influenza virus, and tested them for the presence of endotoxins and influenza virus to characterize the potential impact of airborne influenza virus transmission during outbreaks at commercial poultry farms. Influenza viruses were detected by RT-PCR in filter-rinse fluids collected up to 60 meters downwind from the barns, but virus isolation did not yield any isolates. Viral loads in the air samples were low and beyond the limit of RT-PCR quantification except for one in-barn measurement showing a virus concentration of 8.48 x 10(4) genome copies/m(3). Air samples taken outside poultry barns had endotoxin concentrations of ~50 EU/m(3) that declined with increasing distance from the barn. Atmospheric dispersion modeling of particulate matter, using location-specific meteorological data for the sampling days, demonstrated a positive correlation between endotoxin measurements and modeled particulate matter concentrations, with an R(2) varying from 0.59 to 0.88. Our data suggest that areas at high risk for human or animal exposure to airborne influenza viruses can be modeled during an outbreak to allow directed interventions following targeted surveillance.
Pahwa, Narinder; Kumar, Atul; Gupta, Siddharth
2011-01-01
Objectives To test the short term clinical effectiveness of commercially available 0.07%.cetylpyridinium chloride mouth rinse in patients undergoing fixed orthodontic treatment as compared to a placebo mouth rinse and patients using toothbrush and toothpaste. Method Forty-five subjects for this double blind study were assigned randomly into three groups of 15 each. Gingival inflammation, plaque accumulation, and bleeding on probing, were recorded at baseline (10 days after prophylaxis), and at the end of one month in all the three groups and compared. Results Paired t test showed significant differences in bleeding index for pre and post treatment recordings for cetylpyridinium group. Modified gingival index showed no significant difference in the cetylpyridinium group. For plaque index significant difference was found for cetylpyridinium and control groups. Conclusion Cetylpyridinium mouth rinse 0.7% was found to be effective in reducing the bleeding and plaque index scores. It was not effective in reducing the modified gingival index scores. Cetylpyridinium mouth rinse 0.07% improves the oral hygiene of orthodontic patients when used as an adjunct to normal oral hygiene measures. PMID:23960507
40 CFR 471.95 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2013 CFR
2013-07-01
... I—PSNS. There shall be no discharge of process wastewater pollutants. (p) Molten salt rinse. Subpart... (pounds per million off-pounds) of zirconium-hafnium rinsed following molten salt treatment Chromium 0.333...
40 CFR 471.95 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2014 CFR
2014-07-01
... I—PSNS. There shall be no discharge of process wastewater pollutants. (p) Molten salt rinse. Subpart... (pounds per million off-pounds) of zirconium-hafnium rinsed following molten salt treatment Chromium 0.333...
40 CFR 471.95 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2012 CFR
2012-07-01
... I—PSNS. There shall be no discharge of process wastewater pollutants. (p) Molten salt rinse. Subpart... (pounds per million off-pounds) of zirconium-hafnium rinsed following molten salt treatment Chromium 0.333...
Prevalence of parasitic contamination of raw vegetables in villages of Qazvin Province, Iran.
Shahnazi, Mojtaba; Jafari-Sabet, Majid
2010-09-01
We conducted a study to determine the extent of parasitic contamination of raw vegetables distributed by wholesalers in villages of Qazvin Province, Iran. Vegetables collected for the study were leek, parsley, lettuce, coriander, radish, spring onion, tarragon, basil, spearmint, and cress. Samples of each vegetable were collected at monthly intervals for 6 months from May to October 2008, yielding a total of 654 samples. Samples of each vegetable collected at each monthly interval were selected randomly and allocated to be washed or to remain unwashed before being analyzed for parasitic contamination. Of the 654 samples collected over the study period, 218 samples were analyzed for parasitic contamination without washing and 436 were washed before being analyzed, with the wash procedure consisting of submersion in a solution of 200 ppm of calcium hypochlorite and rinsing in an automated vegetable washer for 10 minutes. The samples were analyzed according to the method used by the U.S. Food and Drug Administration for identifying parasitic contamination of raw fruits and vegetables, with specimens weighing 200 g each being prepared from the vegetable samples, followed by sonication of each specimen for 10 minutes in 1.5 L of detergent wash solution, collection and centrifugation of a 50-mL aliquot of the wash solution for 15 minutes at 1500 g, and examination of the resulting sediment for parasites by light microscopy. No parasitic contamination was found on any of the 436 washed samples of vegetables. Of the 218 unwashed samples of vegetables, 82 (37.6%) were found to be contaminated with parasites, of which 69 (31.6%) were contaminated with metazoa (helminth eggs in 9.6% and rhabditoid larvae in 22.0%), and 13 (6.0%) were contaminated with protozoa (Entamoeba coli cysts in 2.8%, Entamoeba histolytica/E. dispar cysts in 1.4%, and Giardia lamblia cysts in 1.8%). The difference in parasitic contamination of the washed and unwashed groups of vegetables was significant at p < 0.05. Helminth eggs detected in unwashed samples included those of nematodes (Ascaris lumbricoides [2.3%], Trichuris trichiura [0.9%], and Trichostrongylus spp. [2.8%]), trematodes (Dicrocoelium dendriticum [1.4%]), and cestodes (Taenia spp. [1.8%] and Hymenolepis nana [0.5%]). The eggs recovered in greatest number were those of nematodes (n = 13), followed by those of cestodes (n = 5) and trematodes (n = 3). No helminth eggs were found on unwashed samples of spearmint, tarragon, coriander, or radish. The percent parasitic contamination of unwashed samples was highest for leek (66.7%) and lowest for radish (20.7%). The highest percent parasitic contamination was with rhabditoid larvae (22.0%) and the lowest with H. nana eggs (0.5%). These findings emphasize the importance of properly washing and disinfecting raw vegetables before they are consumed.
Prevalence of salmonella in neck skin and bone of chickens.
Wu, Diezhang; Alali, W Q; Harrison, M A; Hofacre, C L
2014-07-01
Bone-in and boneless parts, such as drumsticks, are used in ground chicken production. In addition, neck skin is used as a source of fat in ground products. Contaminated chicken neck skin and bones containing internalized Salmonella are potential sources of this pathogen in ground chicken. This study determined the prevalence of Salmonella and serotype distribution in drumstick bones and neck skin of postchill chicken carcasses. One week prior to slaughter, chicken houses (n = 26) at nine farms were tested for the presence of Salmonella, using the boot sock method. Chicken flocks from these houses originated from Salmonella-positive breeders. Eight Salmonella-positive chicken flocks and one flock with undetermined Salmonella status were monitored through processing. Three hundred postchill drumsticks and 299 neck skin samples were analyzed for Salmonella prevalence. Skin samples were rinsed and stomached prior to analysis. Bones were extracted from the drumsticks, external surfaces were sterilized, and bones were crushed for analysis. One Salmonella isolate from each positive sample was serogrouped. Half of the isolates representing different sample types were serotyped. Overall, Salmonella was found in 0.8, 21.4, and 80.1% of bone marrow, neck skin, and farms, respectively. Prevalence of Salmonella on rinsed skin samples (2.3%) and stomached skin samples (20.7%) differed significantly (P ≤ 0.05). Serogroups B, C2, D, and E were found at 23.4, 31.9, 11.7, and 29.8%, respectively. Six Salmonella serotypes were identified: Liverpool (37.9%), Kentucky (27.6%), and Typhimurium (27.6%) were isolated most frequently from neck skin; the two bone isolates were Kentucky; and more than 50% of the farm isolates were Kentucky and Ouakam. Salmonella-contaminated neck skin might be a more significant source of this contamination in ground chicken than Salmonella internalized in bones.
An experimental investigation of barite formation in seawater
Ganeshram, R.S.; Francois, R.; Commeau, J.; Brown-Leger, S. L.
2003-01-01
We report results from time-series decay and sequential leaching experiments of laboratory cultured and coastal plankton to elucidate the mechanisms controlling barite formation in seawater. Batch-cultured diatoms ( Stephanopyxis palmerina ) and coccolithophorids (Emiliania huxleyi) were let to decay in the dark for 8-10 weeks, suspended in aerated seawater. The development of barite crystals was monitored by Scanning Electron Microscopy (SEM). A similar experiment was conducted with plankton collected during the spring-bloom in Vineyard Sound (MA). In addition to SEM, suspended particles were sequentially leached for Ba (distilled water rinse; 10% (v/v) HNO3 rinse at room temperature; 30% (v/v) HCl at 80??C overnight; 50% (v/v) HNO3 at 80??C overnight) immediately after collection, and after 10-week decay in seawater, in seawater poisoned with HgCl2, and in seawater spiked with 135Ba. Both experiments showed an increase in the number of barite crystals during decay. The spring-bloom plankton had initially a large pool of labile Ba, soluble in distilled water and cold dilute HNO3 that was lost from the plankton after 10-week decay in both axenic and nonaxenic conditions. In contrast, Ba in the decayed plankton samples was predominantly in forms extracted by hot HCl and hot HNO3 acids, which were attributed to presence of barite Ba and refractory organic Ba respectively. The increase in barite crystal counts under a Scanning Electron Microscope (SEM), the increase in HCl extractable Ba relative to organic carbon, and the loss of a large fraction of Ba during plankton decay suggest that living plankton consists of a relatively large pool of labile Ba, which is rapidly released during plankton decomposition and acts as the main source of Ba for barite formation in supersaturated microenvironments. Since mass balance indicates that only a small proportion (2 to 4%) of the labile-Ba pool is converted to barite, the availability of microenvironments that could locally concentrate Ba released by plankton decay seems to be the main limiting factor in barite precipitation. ?? 2003 Elsevier Science Ltd.
Batista, Ana Luzia Araújo; Lins, Ruthineia Diógenes Alves Uchôa; de Souza Coelho, Renata; do Nascimento Barbosa, Danielle; Moura Belém, Nayara; Alves Celestino, Frayni Josley
2014-02-01
Medicinal plants represent important therapeutic resources to health restoration, including the use of herbal products in the mouth conditions treatment. A randomized controlled clinical trial was performed in order to evaluate the effectiveness of mouth rinse with pomegranate and chamomile plant extracts, against chlorhexidine 0.12% in the gingiva bleeding condition. The mouth rinses with the herbal products were effective for this case, showing thus, antimicrobial and anti-inflammatory properties similar to that of chlorhexidine 0.12%. Copyright © 2013 Elsevier Ltd. All rights reserved.
Berrang, M E; Dickens, J A; Musgrove, M T
2000-11-01
Scalding has been found to lower the levels of Campylobacter on broiler carcasses. However, the numbers recovered from whole-carcass rinse samples increase following defeathering. This study was undertaken to examine the effect of a second scald applied after defeathering on microbial levels recovered from carcass rinses. Four treatments were evaluated: 1) immersion at 60 C for 28 s 30 min after defeathering, 2) immersion at 60 C for 28 s immediately after defeathering, 3) spray at 73 C for 20 s 30 min after defeathering, and 4) spray at 71 C for 20 s immediately after defeathering. As reported earlier, a significant increase in Campylobacter counts per mL whole carcass rinse was noted after carcasses were defeathered. However, when applied 30 min after defeathering, neither the immersion nor the spray second scald treatments lowered the Campylobacter counts. Likewise, neither treatment had any affect on Escherichia coli or coliform bacteria counts, even though total counts were slightly reduced by the treatments. When the second scald treatment immediately followed defeathering, the same trends were observed. Campylobacter counts after the second scald remained at the postpick levels, as did counts for E. coli and coliform bacteria, but total plate counts were slightly reduced. Overall, it would appear that a postscald treatment gentle enough not to alter the carcass appearance or meat quality would not effectively lower Campylobacter, E. coli, or coliform bacteria counts.
Saboori, Shadi; Greene, Leslie E.; Moe, Christine L.; Freeman, Matthew C.; Caruso, Bethany A.; Akoko, Daniel; Rheingans, Richard D.
2013-01-01
We assessed whether supplying soap to primary schools on a regular basis increased pupil hand washing and decreased Escherichia coli hand contamination. Multiple rounds of structured observations of hand washing events after latrine use were conducted in 60 Kenyan schools, and hand rinse samples were collected one time in a subset of schools. The proportion of pupils observed practicing hand washing with soap (HWWS) events was significantly higher in schools that received a soap provision intervention (32%) and schools that received soap and latrine cleaning materials (38%) compared with controls (3%). Girls and boys had similar hand washing rates. There were non-significant reductions in E. coli contamination among intervention school pupils compared with controls. Removing the barrier of soap procurement can significantly increase availability of soap and hand washing among pupils; however, we discuss limitations in the enabling policy and institutional environment that may have prevented reaching desired levels of HWWS. PMID:23939707
Prevalence of human papillomavirus in anal and oral sites among patients with genital warts.
Kofoed, Kristian; Sand, Carsten; Forslund, Ola; Madsen, Klaus
2014-03-01
Genital warts are caused by human papillomavirus (HPV). HPV is a leading cause of anogenital malignancies and a role of HPV in the aetiology of oro-pharyngeal cancers has been demonstrated. The frequency of oral HPV infection in patients with genital warts and the association between concomitant genital, anal and oral infection is unclear. A total of 201 men and women with genital wart-like lesions were recruited. Swab samples were obtained from the genital warts and the anal canal and an oral rinse was collected. Anal HPV was found in 46.2% and oral HPV in 10.4% of the participants. Concordance between anal and genital wart HPV types was 78.1%, while concordance between oral and genital wart types was 60.9%. A lower concordance of 21.7% was observed between anal and oral HPV types. Significantly more women than men had multiple HPV types and anal HPV. In conclusion, extra genital HPV is common in patients with genital warts. A gender inequality seems to exist.
Saboori, Shadi; Greene, Leslie E; Moe, Christine L; Freeman, Matthew C; Caruso, Bethany A; Akoko, Daniel; Rheingans, Richard D
2013-10-01
We assessed whether supplying soap to primary schools on a regular basis increased pupil hand washing and decreased Escherichia coli hand contamination. Multiple rounds of structured observations of hand washing events after latrine use were conducted in 60 Kenyan schools, and hand rinse samples were collected one time in a subset of schools. The proportion of pupils observed practicing hand washing with soap (HWWS) events was significantly higher in schools that received a soap provision intervention (32%) and schools that received soap and latrine cleaning materials (38%) compared with controls (3%). Girls and boys had similar hand washing rates. There were non-significant reductions in E. coli contamination among intervention school pupils compared with controls. Removing the barrier of soap procurement can significantly increase availability of soap and hand washing among pupils; however, we discuss limitations in the enabling policy and institutional environment that may have prevented reaching desired levels of HWWS.
Relationship between salivary flow rates and Candida albicans counts.
Navazesh, M; Wood, G J; Brightman, V J
1995-09-01
Seventy-one persons (48 women, 23 men; mean age, 51.76 years) were evaluated for salivary flow rates and Candida albicans counts. Each person was seen on three different occasions. Samples of unstimulated whole, chewing-stimulated whole, acid-stimulated parotid, and candy-stimulated parotid saliva were collected under standardized conditions. An oral rinse was also obtained and evaluated for Candida albicans counts. Unstimulated and chewing-stimulated whole flow rates were negatively and significantly (p < 0.001) related to the Candida counts. Unstimulated whole saliva significantly (p < 0.05) differed in persons with Candida counts of 0 versus <500 versus < or = 500. Chewing-stimulated saliva was significantly (p < 0.05) different in persons with 0 counts compared with those with a > or = 500 count. Differences in stimulated parotid flow rates were not significant among different levels of Candida counts. The results of this study reveal that whole saliva is a better predictor than parotid saliva in identification of persons with high Candida albicans counts.
Hammack, Thomas S; Valentin-Bon, Iris E; Jacobson, Andrew P; Andrews, Wallace H
2004-05-01
Soak and rinse methods were compared for the recovery of Salmonella from whole cantaloupes. Cantaloupes were surface inoculated with Salmonella cell suspensions and stored for 4 days at 2 to 6 degrees C. Cantaloupes were placed in sterile plastic bags with a nonselective preenrichment broth at a 1:1.5 cantaloupe weight-to-broth volume ratio. The cantaloupe broths were shaken for 5 min at 100 rpm after which 25-ml aliquots (rinse) were removed from the bags. The 25-ml rinses were preenriched in 225-ml portions of the same uninoculated broth type at 35 degrees C for 24 h (rinse method). The remaining cantaloupe broths were incubated at 35 degrees C for 24 h (soak method). The preenrichment broths used were buffered peptone water (BPW), modified BPW, lactose (LAC) broth, and Universal Preenrichment (UP) broth. The Bacteriological Analytical Manual Salmonella culture method was compared with the following rapid methods: the TECRA Unique Salmonella method, the VIDAS ICS/SLM method, and the VIDAS SLM method. The soak method detected significantly more Salmonella-positive cantaloupes (P < 0.05) than did the rinse method: 367 Salmonella-positive cantaloupes of 540 test cantaloupes by the soak method and 24 Salmonella-positive cantaloupes of 540 test cantaloupes by the rinse method. Overall, BPW, LAC, and UP broths were equivalent for the recovery of Salmonella from cantaloupes. Both the VIDAS ICS/SLM and TECRA Unique Salmonella methods detected significantly fewer Salmonella-positive cantaloupes than did the culture method: the VIDAS ICS/SLM method detected 23 of 50 Salmonella-positive cantaloupes (60 tested) and the TECRA Unique Salmonella method detected 16 of 29 Salmonella-positive cantaloupes (60 tested). The VIDAS SLM and culture methods were equivalent: both methods detected 37 of 37 Salmonella-positive cantaloupes (60 tested).
Rinsing with antacid suspension reduces hydrochloric acid-induced erosion.
Alves, Maria do Socorro Coelho; Mantilla, Taís Fonseca; Bridi, Enrico Coser; Basting, Roberta Tarkany; França, Fabiana Mantovani Gomes; Amaral, Flávia Lucisano Botelho; Turssi, Cecilia Pedroso
2016-01-01
Mouthrinsing with antacids, following erosive episodes, have been suggested as a preventative strategy to minimize tooth surface loss due to their neutralizing effect. The purpose of this in situ study was to evaluate the effect of an antacid suspension containing sodium alginate, sodium bicarbonate and calcium carbonate in controlling simulated erosion of enamel of intrinsic origin. The experimental units were 48 slabs (3×3×2mm) of bovine enamel, randomly divided among 12 volunteers who wore palatal appliances with two enamel slabs. One of them was exposed extra-orally twice a day to 25mL of a hydrochloric acid (HCl) solution (0.01M, pH 2) for 2min. There were two independent phases, lasting 5 days each. In the first phase, according to a random scheme, half of the participants rinsed with 10mL of antacid suspension (Gaviscon(®), Reckitt Benckiser Healthcare Ltd.), while the remainder was rinsed with deionized water, for 1min. For the second phase, new slabs were inserted and participants switched to the treatment not received in the first stage. Therefore, the groups were as follows: (a) erosive challenge with HCl+antacid suspension; (b) erosive challenge with HCl+deionized water (DIW); (c) no erosive challenge+antacid suspension; (d) no erosive challenge+DIW. Specimens were assessed in terms of surface loss using optical profilometry and Knoop microhardness. The data were analyzed using repeated measures two-way analysis of variance and Tukey's tests. Compared to DIW rinses, surface loss of enamel was significantly lower when using an antacid rinse following erosive challenges (p=0.015). The Knoop microhardness of the enamel was significantly higher when the antacid rinse was used (p=0.026). The antacid suspension containing sodium alginate, sodium bicarbonate and calcium carbonate, rinsed after erosive challenges of intrinsic origin, reduced enamel surface loss. Copyright © 2015 Elsevier Ltd. All rights reserved.
... Menu Search Main navigation Skip to content Conditions & Treatments Allergies Asthma Primary Immunodeficiency Disease Related Conditions Drug Guide ... Expert Search Search AAAAI Breadcrumb navigation Home ▸ Conditions & Treatments ▸ Library ▸ Allergy Library ▸ Saline Sinus Rinse Recipe Share | Saline Sinus ...
Haps, S; Slot, D E; Berchier, C E; Van der Weijden, G A
2008-11-01
To review the literature concerning cetylpyridinium chloride (CPC) containing mouth rinses as effective adjuncts to toothbrushing in the prevention of plaque accumulation and gingival inflammation. Medline and the Cochrane Central Register of Controlled Trials were searched up to January 2008 to identify appropriate studies. The primary outcome measurements were plaque accumulation and gingivitis. Independent screening of titles and abstracts of 3250 papers resulted in eight publications that met the criteria of eligibility. Mean values and standard deviations were obtained by data extraction. Descriptive comparisons are presented for brushing only or brushing and rinsing. Meta-analyses were performed when possible. The existing evidence supports that CPC containing mouth rinses, when used as adjuncts to either supervised or unsupervised oral hygiene, provide a small but significant additional benefit in reducing plaque accumulation and gingival inflammation.
Use of Ultrasonic Energy in Assessing Microbial Contamination on Surfaces
Puleo, John R.; Favero, Martin S.; Petersen, Norman J.
1967-01-01
Ultrasonic tanks were evaluated for their ability to remove viable microorganisms from various surfaces for subsequent enumeration. Test surfaces were polished stainless steel, smooth glass, frosted glass, and electronic components. The position of contaminated surfaces in relation to the ultrasonic energy source, distance of the ultrasonic source from the test surfaces, and temperature of the rinse fluid were some of the factors which influenced recovery. Experimental systems included both naturally occurring microbial contamination and artificial contamination with spores of Bacillus subtilis var. niger. The results showed that ultrasonic energy was more reliable and efficient than mechanical agitation for recovering surface contaminants. Conditions which increased the number and percentage of microorganisms recovered by ultrasonic energy were: using a cold rinse fluid, placing the sample bottle on the bottom of the ultrasonic tank, and facing the contaminated surfaces toward the energy source. It was also demonstrated that ultrasonic energy could be effectively used for eluting microorganisms from cotton swabs. PMID:16349743
The Influence of Carbohydrate Mouth Rinse on Self-Selected Intermittent Running Performance.
Rollo, Ian; Homewood, George; Williams, Clyde; Carter, James; Goosey-Tolfrey, Vicky L
2015-12-01
This study investigated the influence of mouth rinsing a carbohydrate solution on self-selected intermittent variable-speed running performance. Eleven male amateur soccer players completed a modified version of the Loughborough Intermittent Shuttle Test (LIST) on 2 occasions separated by 1 wk. The modified LIST allowed the self-selection of running speeds during Block 6 of the protocol (75-90 min). Players rinsed and expectorated 25 ml of noncaloric placebo (PLA) or 10% maltodextrin solution (CHO) for 10 s, routinely during Block 6 of the LIST. Self-selected speeds during the walk and cruise phases of the LIST were similar between trials. Jogging speed was significantly faster during the CHO (11.3 ± 0.7 km · h(-1)) than during the PLA trial (10.5 ± 1.3 km · h(-1)) (p = .010); 15-m sprint speeds were not different between trials (PLA: 2.69 ± 0.18 s: CHO: 2.65 ± 0.13 s) (F(2, 10), p = .157), but significant benefits were observed for sprint distance covered (p = .024). The threshold for the smallest worthwhile change in sprint performance was set at 0.2 s. Inferential statistical analysis showed the chance that CHO mouth rinse was beneficial, negligible, or detrimental to repeated sprint performance was 86%, 10%, and 4%, respectively. In conclusion, mouth rinsing and expectorating a 10% maltodextrin solution was associated with a significant increase in self-selected jogging speed. Repeated 15-m sprint performance was also 86% likely to benefit from routinely mouth rinsing a carbohydrate solution in comparison with a taste-matched placebo.
Muramatsu, Keita; Matsuo, Koichiro; Kawai, Yusuke; Yamamoto, Tsukasa; Hara, Yoshitaka; Shimomura, Yasuyo; Yamashita, Chizuru; Nishida, Osamu
2018-06-26
Endotracheal intubation of critically ill patients increases the risk of aspiration pneumonia, which can be reduced by regular oral care. However, the rinsing of the residual oral contaminants after mechanical cleaning carries the risk of aspirating the residue during the intubation period. Removing the contaminants by wiping with mouth wipes could be an alternative to rinsing with water because of no additional fluid. This study tested: (i) the amount of oral bacteria during endotracheal intubation and after extubation; and (ii) the changes in the bacterial count during oral care procedures. Thirty-five mechanically ventilated patients in the intensive care unit were enrolled. The amount of bacteria on the dorsal tongue surface was counted before and following oral care and then after the elimination of contaminants either by rinsing with water and suctioning or by wiping with mouth wipes. The oral bacterial amount was compared statistically between the intubation and extubation status and among set time points during the oral care procedure. The oral bacterial count was significantly decreased after extubation. During the oral care procedure, the oral bacterial amount was significantly lower after eliminating the contaminants either by rinsing or wiping, with no remarkable difference between the elimination techniques. The findings suggest that the oral bacterial amount is elevated during endotracheal intubation, which could increase the risk of aspiration pneumonia. The significant reduction in the bacterial count by wiping indicates that it might be a suitable alternative to rinsing for mechanically ventilated patients. © 2018 Japan Academy of Nursing Science.
Prebrushing rinse with water on plaque removal: a split-mouth design.
Van der Sluijs, E; Slot, D E; Hennequin-Hoenderdos, N L; Van Leeuwen, Mpc; Van der Weijden, G A
2017-11-01
The aim was to evaluate whether there is an additional beneficial effect on dental plaque removal of rinsing the oral cavity with water before toothbrushing. In total, 48 non-dental, systemically healthy participants ≥18 years were included in this randomized controlled clinical trial using a split-mouth design. The participants were requested to refrain from any form of oral hygiene for 48 h. First dental plaque scores (PI) were assessed full mouth. Two randomly assigned contra-lateral quadrants were brushed. Next the participant rinsed for 1 min with 15 ml water. Subsequently, the opposite two contra-lateral quadrants were brushed. Brushing was performed without toothpaste. Subsequently the second full-mouth PI assessment was performed. The brushing and rinsing procedure was performed under supervision and brushing time was tracked by a timer, each quadrant was brushed for 30 s. For the buccal, lingual, and approximal surfaces and tooth type, a subanalysis was performed. At baseline there was no statistically significantly difference between the two sets of contra-lateral quadrants. When a water rinse was used before toothbrushing the PI-score was reduced by 58%. If water rinse was used post-brushing the PI-score reduced by 57%. The difference of 0.04 in mean plaque index score reduction between the two brushing regimens was not significant(P = 0.162). When a 2 min brushing exercise was performed, on average more than 55% dental plaque was removed. Prerinsing with water did not contribute significantly to toothbrush efficacy. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
27 CFR 30.45 - Withdrawal gauge for packages.
Code of Federal Regulations, 2010 CFR
2010-04-01
... thorough mixing of the rinse water and the spirits and before return of the spirits to the rinsed packages... returned to the packages. In the case of metal packages the tare established at the time of filling may be...
Shear Bond Strengths of Different Adhesive Systems to Biodentine
Odabaş, Mesut Enes; Bani, Mehmet; Tirali, Resmiye Ebru
2013-01-01
The aim of this study was to measure the shear bond strength of different adhesive systems to Biodentine with different time intervals. Eighty specimens of Biodentine were prepared and divided into 8 groups. After 12 minutes, 40 samples were randomly selected and divided into 4 groups of 10 each: group 1: (etch-and-rinse adhesive system) Prime & Bond NT; group 2: (2-step self-etch adhesive system) Clearfil SE Bond; group 3: (1-step self-etch adhesive systems) Clearfil S3 Bond; group 4: control (no adhesive). After the application of adhesive systems, composite resin was applied over Biodentine. This procedure was repeated 24 hours after mixing additional 40 samples, respectively. Shear bond strengths were measured using a universal testing machine, and the data were subjected to 1-way analysis of variance and Scheffé post hoc test. No significant differences were found between all of the adhesive groups at the same time intervals (12 minutes and 24 hours) (P > .05). Among the two time intervals, the lowest value was obtained for group 1 (etch-and-rinse adhesive) at a 12-minute period, and the highest was obtained for group 2 (two-step self-etch adhesive) at a 24-hour period. The placement of composite resin used with self-etch adhesive systems over Biodentine showed better shear bond strength. PMID:24222742
Shear bond strengths of different adhesive systems to biodentine.
Odabaş, Mesut Enes; Bani, Mehmet; Tirali, Resmiye Ebru
2013-01-01
The aim of this study was to measure the shear bond strength of different adhesive systems to Biodentine with different time intervals. Eighty specimens of Biodentine were prepared and divided into 8 groups. After 12 minutes, 40 samples were randomly selected and divided into 4 groups of 10 each: group 1: (etch-and-rinse adhesive system) Prime & Bond NT; group 2: (2-step self-etch adhesive system) Clearfil SE Bond; group 3: (1-step self-etch adhesive systems) Clearfil S(3) Bond; group 4: control (no adhesive). After the application of adhesive systems, composite resin was applied over Biodentine. This procedure was repeated 24 hours after mixing additional 40 samples, respectively. Shear bond strengths were measured using a universal testing machine, and the data were subjected to 1-way analysis of variance and Scheffé post hoc test. No significant differences were found between all of the adhesive groups at the same time intervals (12 minutes and 24 hours) (P > .05). Among the two time intervals, the lowest value was obtained for group 1 (etch-and-rinse adhesive) at a 12-minute period, and the highest was obtained for group 2 (two-step self-etch adhesive) at a 24-hour period. The placement of composite resin used with self-etch adhesive systems over Biodentine showed better shear bond strength.
Podar, Rajesh; Kulkarni, Gaurav P; Dadu, Shifali S; Singh, Shraddha; Singh, Shishir H
2015-01-01
To evaluate and compare the antimicrobial efficacy of 6% Morinda citrifolia, Azadirachta indica, and 3% sodium hypochlorite (NaOCl) as root canal irrigants. Thirty nonvital maxillary anteriors were randomly assigned to one of the three groups corresponding to the irrigant to be tested; 6% Morinda citrifolia juice (MCJ) (n = 10), A. indica (n = 10) and 3% NaOCl (n = 10). After the root canal access opening a root canal culture sample was taken with two paper points and cultured under aerobic and anaerobic conditions. Cleaning and shaping were completed with irrigation by 10 mL of respective irrigants and 5 mL of final rinse. The patients were recalled after 3 days and canals were rinsed again with 5 mL of the test irrigants. This was followed by obtaining a posttreatment root canal culture sample and culturing and analyzed by counting the colony forming units (CFUs). Six percentage MCJ, A. indica, and 3% NaOCl showed a significant reduction (P < 0.05) in the mean CFU counts for aerobic and anaerobic bacteria between baseline and 3 days. There was no difference in the antimicrobial efficacy of 6% M. citrifolia, A. indica, and 3% NaOCl as root canal irrigants.
Pope, M J; Cherry, T E
2000-09-01
Two trials were conducted to evaluate the presence of salmonella, campylobacter, and generic Escherichia coli on broilers raised on Poultry Litter Treatment (PLT)-enhanced litter in comparison with those raised on untreated litter. Two Company A farms included three houses on each farm as the treated group and three houses per farm as controls. Two complete growouts were evaluated on each farm. The Company B study included 10 farms with two paired houses per farm, one house as the treated group and one house as the control. One growout was evaluated per farm. The pathogen sampling consisted of litter sampling and whole bird rinses on the farm and in the processing plant. Litter pH, ammonia concentration, total litter bacteria, temperatures, and humidity were also recorded. The study with Company A resulted in lower mean levels of pH, ammonia concentration, total litter bacteria, litter E. coli, and bird rinse counts for salmonella and E. coli in houses treated with PLT. The results for Company B closely resembled those for Company A, but also included campylobacter data, which showed no difference between treated and control groups. The data indicate that PLT may be a beneficial component for on-farm pathogen reduction.
SILANE-BASED CONVERSION COATING FOR METALS
For the past three years, a project to develop new pretreatment rinses for metals was carried out by the U.S. Environmental Protection Agency and the University of Cincinnati. The project involved optimization of laboratory rinses with dilute aqueous solutions organofunctional s...
Antimicrobial management of third molars: survey results for military dentists.
Wilhelm, R J; Sutley, S H; Quigley, N C
1996-01-01
In a survey of military dentists to examine use of antimicrobial agents in the management of third molars, questions addressed use of antibiotics and an antimicrobial rinse in treating pericoronitis and third molar extractions. Results were compared with information from a literature review. According to the survey, a majority of clinicians use antibiotics to treat pericoronitis but not surgical extraction of asymptomatic dental impactions. About 60 percent of respondents use a preoperative rinse with chlorhexidine in treating the third molar conditions discussed. A postoperative rinse with chlorhexidine was used less frequently. Half the respondents listed medicolegal factors in their decisions.
Effects of etch-and-rinse and self-etch adhesives on dentin MMP-2 and MMP-9.
Mazzoni, A; Scaffa, P; Carrilho, M; Tjäderhane, L; Di Lenarda, R; Polimeni, A; Tezvergil-Mutluay, A; Tay, F R; Pashley, D H; Breschi, L
2013-01-01
Auto-degradation of collagen matrices occurs within hybrid layers created by contemporary dentin bonding systems, by the slow action of host-derived matrix metalloproteinases (MMPs). This study tested the null hypothesis that there are no differences in the activities of MMP-2 and -9 after treatment with different etch-and-rinse or self-etch adhesives. Tested adhesives were: Adper Scotchbond 1XT (3M ESPE), PQ1 (Ultradent), Peak LC (Ultradent), Optibond Solo Plus (Kerr), Prime&Bond NT (Dentsply) (all 2-step etch-and-rinse adhesives), and Adper Easy Bond (3M ESPE), Tri-S (Kuraray), and Xeno-V (Dentsply) (1-step self-etch adhesives). MMP-2 and -9 activities were quantified in adhesive-treated dentin powder by means of an activity assay and gelatin zymography. MMP-2 and MMP-9 activities were found after treatment with all of the simplified etch-and-rinse and self-etch adhesives; however, the activation was adhesive-dependent. It is concluded that all two-step etch-and-rinse and the one-step self-etch adhesives tested can activate endogenous MMP-2 and MMP-9 in human dentin. These results support the role of endogenous MMPs in the degradation of hybrid layers created by these adhesives.
Nosé, Ricardo M; Daga, Fabio B; Nosé, Walton; Kasahara, Niro
2017-03-01
To evaluate the efficacy of mannitol solution as a decontamination agent on the chemical burn of the human corneas. Eight donor corneas from an eye bank were exposed to 25μl of 2.5% hydrofluoric acid (HF) solution on a filter paper for 20s. Three eyes were rinsed with 1000ml of mannitol 20% for 15min immediately after removal of the filter paper, 3 other were rinsed with sodium chloride (NaCl) 0.9% (1000ml for 15min) and two eyes were not rinsed. Microstructural changes were monitored in the time domain by optical coherence tomography (OCT) imaging for 75min. NaCl reduced the penetration depth to approximately half the thickness of the cornea at 15min; scattering within the anterior cornea was higher than that for the unrinsed eye. With mannitol, no increased scattering was observed in the posterior part of the corneal stroma within a time period of 1h after rinsing. OCT images revealed low-scattering intensity within the anterior stroma at the end of the rinsing period. In eye bank human corneas, mannitol proved to be an efficient agent to decontaminate HF burn. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.
Schiffner, Ulrich; Bahr, Mathias; Effenberger, Susanne
2007-12-01
To study the outcome of intensified mechanical oral hygiene compared with the effect of an adjunctive antibacterial mouth rinse on plaque and gingivitis in elderly people. In a randomized, single-blind, 6-month controlled clinical study, 106 subjects, 55 years or older, were divided into four groups: (I) Participants were instructed on improved mechanical oral hygiene, including interdental hygiene; (II) subjects used an antibacterial mouth rinse containing amine and stannous fluoride in addition to their usual oral hygiene practices; (III) both intensive mechanical and antibacterial measures were combined; and (IV) a control group with no specific regimen. Gingivitis and plaque were examined. After 6 months, both plaque and gingivitis scores were significantly lower than at baseline in all groups. Reductions in gingivitis differed significantly between the control group and all other groups but not between the three intervention groups. Only groups with improved mechanical oral hygiene showed significant improvements in plaque scores compared with control. Intensive mechanical oral hygiene resulted in greater plaque reduction than the combination of an antibacterial rinse and usual oral hygiene procedures. Gingivitis was reduced by both intensive oral hygiene and use of the amine/stannous fluoride rinse. Combining intensive mechanical oral hygiene with the antibacterial rinse did not result in further gingivitis reduction.
Grzesiak, B; Krukowski, H; Głowacka, A
2018-04-16
The research concerns algae of the genus Prototheca. They are found in the natural environment and they can cause a disease in animals and humans called protothecosis. The aim of the study was to evaluate the in vitro activity of the fruit and vegetable rinse agent SunSmile ® Fruit & Vegetable Rinse (Sunrider International) against P. zopfii isolates. The materials consisted of ten P. zopfii strains isolated from the milk of cows with mastitis. The following antifungal chemotherapeutic agents were also used in the study for comparison: nystatin, ketoconazole, amphothericin B, miconazole, clotrimazole, econazole, fluconazole, and flucytosine. The tube dilution method were used to evaluate the effect of a fruit and vegetable rinse agent and the disc-diffusion method to evaluate the effect of antifungal chemotherapeutic agents on P. zopfii strains. All tested strains of P. zopfii were susceptible to the action of the SunSmile ® agent. The MMC was in the range of 0.0024-0.0190%. The SunSmile ® Fruit & Vegetable Rinse can be used in prevention of mastitis in cows and in human protothecosis due to its safe, natural composition and efficacy. Copyright © 2018 Elsevier Masson SAS. All rights reserved.
Effects of Etch-and-Rinse and Self-etch Adhesives on Dentin MMP-2 and MMP-9
Mazzoni, A.; Scaffa, P.; Carrilho, M.; Tjäderhane, L.; Di Lenarda, R.; Polimeni, A.; Tezvergil-Mutluay, A.; Tay, F.R.; Pashley, D.H.; Breschi, L.
2013-01-01
Auto-degradation of collagen matrices occurs within hybrid layers created by contemporary dentin bonding systems, by the slow action of host-derived matrix metalloproteinases (MMPs). This study tested the null hypothesis that there are no differences in the activities of MMP-2 and -9 after treatment with different etch-and-rinse or self-etch adhesives. Tested adhesives were: Adper Scotchbond 1XT (3M ESPE), PQ1 (Ultradent), Peak LC (Ultradent), Optibond Solo Plus (Kerr), Prime&Bond NT (Dentsply) (all 2-step etch-and-rinse adhesives), and Adper Easy Bond (3M ESPE), Tri-S (Kuraray), and Xeno-V (Dentsply) (1-step self-etch adhesives). MMP-2 and -9 activities were quantified in adhesive-treated dentin powder by means of an activity assay and gelatin zymography. MMP-2 and MMP-9 activities were found after treatment with all of the simplified etch-and-rinse and self-etch adhesives; however, the activation was adhesive-dependent. It is concluded that all two-step etch-and-rinse and the one-step self-etch adhesives tested can activate endogenous MMP-2 and MMP-9 in human dentin. These results support the role of endogenous MMPs in the degradation of hybrid layers created by these adhesives. PMID:23128110
Influence of Application Time and Etching Mode of Universal Adhesives on Enamel Adhesion.
Sai, Keiichi; Takamizawa, Toshiki; Imai, Arisa; Tsujimoto, Akimasa; Ishii, Ryo; Barkmeier, Wayne W; Latta, Mark A; Miyazaki, Masashi
2018-01-01
To investigate the influence of application time and etching mode of universal adhesives on enamel adhesion. Five universal adhesives, Adhese Universal, Bondmer Lightless, Clearfil Universal Bond Quick, G-Premio Bond, and Scotchbond Universal, were used. Bovine incisors were prepared and divided into four groups of ten teeth each. SBS, Ra, and SFE were determined after the following procedures: 1. self-etch mode with immediate air blowing after application (IA); 2. self-etch mode with prolonged application time (PA); 3. etch-and-rinse mode with IA; 4. etch-and-rinse mode with PA. After 24-h water storage, the bonded assemblies were subjected to shear bond strength (SBS) tests. For surface roughness (Ra) and surface free energy (SFE) measurements, the adhesives were simply applied to the enamel and rinsed with acetone and water before the measurements were carried out. Significantly higher SBS and Ra values were obtained with etch-and-rinse mode than with self-etch mode regardless of the application time or type of adhesive. Although most adhesives showed decreased SFE values with increased application time in self-etch mode, SFE values in etch-and-rinse mode were dependent on the adhesive type and application time. Etching mode, application time, and type of adhesive significantly influenced the SBS, Ra, and SFE values.
Sadler-Reeves, L; Aird, H; de Pinna, E; Elviss, N; Fox, A; Kaye, M; Jorgensen, F; Lane, C; Willis, C; McLauchlin, J
2016-02-01
A total of 554 samples of bean sprouts or other sprouted seeds were collected at retail sale and submitted to nine Official Control Laboratories in England and Northern Ireland during January to March 2011. Samples (100 g) were tested for the presence of Salmonella using the EN ISO 6579:2002 method. Products labelled as ready-to-eat comprised 23% of the samples and 61% were labelled as raw or to-cook: the remaining 12% had no indication if the food was intended as ready-to-eat or ready-to-cook, and 4% were not recorded. Salmonella spp. were detected from four samples of mung-bean sprouts (0·7% of all the 554 samples) and all four isolates were confirmed as Salmonella enterica serovar Abaetetuba (11 : k : 1,5). Two of the samples where Salmonella was detected were sold as ready-to-eat (labelled 'rinse and serve' only): The remaining two were from samples labelled as ready-to-cook. Consumption of sprouted seeds have been associated with infections from a range of foodborne pathogens, particularly Salmonella and shigatoxin producing Escherichia coli (STEC). However, there is limited data (including that from EU monitoring) on foodborne pathogens in samples of this food type which are not associated with outbreaks of infection. Out of 554 raw and ready-to-eat bean sprouts and sprouted seeds sampled at retail, Salmonella spp. was detected from four samples. This study illustrated the potential of this product to be contaminated with a human pathogen and the importance of considering the intended use and preparation of specific food in assessing microbiological risks. © 2015 The Society for Applied Microbiology.
A caffeine-maltodextrin mouth rinse counters mental fatigue.
Van Cutsem, Jeroen; De Pauw, Kevin; Marcora, Samuele; Meeusen, Romain; Roelands, Bart
2018-04-01
Mental fatigue is a psychobiological state caused by prolonged periods of demanding cognitive activity that has negative implications on many aspects in daily life. Caffeine and carbohydrate ingestion have been shown to be able to reduce these negative effects of mental fatigue. Intake of these substances might however be less desirable in some situations (e.g., restricted caloric intake, Ramadan). Rinsing caffeine or glucose within the mouth has already been shown to improve exercise performance. Therefore, we sought to evaluate the effect of frequent caffeine-maltodextrin (CAF-MALT) mouth rinsing on mental fatigue induced by a prolonged cognitive task. Ten males (age 23 ± 2 years, physical activity 7.3 ± 4.3 h/week, low CAF users) performed two trials. Participants first completed a Flanker task (3 min), then performed a 90-min mentally fatiguing task (Stroop task), followed by another Flanker task. Before the start and after each 12.5% of the Stroop task (eight blocks), subjects received a CAF-MALT mouth rinse (MR: 0.3 g/25 ml CAF: 1.6g/25 ml MALT) or placebo (PLAC: 25 ml artificial saliva). Self-reported mental fatigue was lower in MR (p = 0.017) compared to PLAC. Normalized accuracy (accuracy first block = 100%) was higher in the last block of the Stroop in MR (p = 0.032) compared to PLAC. P2 amplitude in the dorsolateral prefrontal cortex (DLPFC) decreased over time only in PLAC (p = 0.017). Frequent mouth rinsing during a prolonged and demanding cognitive task reduces mental fatigue compared to mouth rinsing with artificial saliva.
Disinfection of syringes contaminated with hepatitis C virus by rinsing with household products.
Binka, Mawuena; Paintsil, Elijah; Patel, Amisha; Lindenbach, Brett D; Heimer, Robert
2015-01-01
Background. Hepatitis C virus (HCV) transmission among people who inject drugs (PWID) is associated with the sharing of injection paraphernalia. People who inject drugs often "disinfect" used syringes with household products when new syringes are unavailable. We assessed the effectiveness of these products in disinfecting HCV-contaminated syringes. Methods. A genotype-2a reporter virus assay was used to assess HCV infectivity in syringes postrinsing. Hepatitis C virus-contaminated 1 mL insulin syringes with fixed needles and 1 mL tuberculin syringes with detachable needles were rinsed with water, Clorox bleach, hydrogen peroxide, ethanol, isopropanol, Lysol, or Dawn Ultra at different concentrations. Syringes were either immediately tested for viable virus or stored at 4°C, 22°C, and 37°C for up to 21 days before viral infectivity was determined. Results. Most products tested reduced HCV infectivity to undetectable levels in insulin syringes. Bleach eliminated HCV infectivity in both syringes. Other disinfectants produced virus recovery ranging from high (5% ethanol, 77% ± 12% HCV-positive syringes) to low (1:800 Dawn Ultra, 7% ± 7% positive syringes) in tuberculin syringes. Conclusions. Household disinfectants tested were more effective in fixed-needle syringes (low residual volume) than in syringes with detachable needles (high residual volume). Bleach was the most effective disinfectant after 1 rinse, whereas other diluted household products required multiple rinses to eliminate HCV. Rinsing with water, 5% ethanol (as in beer), and 20% ethanol (as in fortified wine) was ineffective and should be avoided. Our data suggest that rinsing of syringes with household disinfectants may be an effective tool in preventing HCV transmission in PWID when done properly.
Disinfection of Syringes Contaminated With Hepatitis C Virus by Rinsing With Household Products
Binka, Mawuena; Paintsil, Elijah; Patel, Amisha; Lindenbach, Brett D.; Heimer, Robert
2015-01-01
Background. Hepatitis C virus (HCV) transmission among people who inject drugs (PWID) is associated with the sharing of injection paraphernalia. People who inject drugs often “disinfect” used syringes with household products when new syringes are unavailable. We assessed the effectiveness of these products in disinfecting HCV-contaminated syringes. Methods. A genotype-2a reporter virus assay was used to assess HCV infectivity in syringes postrinsing. Hepatitis C virus-contaminated 1 mL insulin syringes with fixed needles and 1 mL tuberculin syringes with detachable needles were rinsed with water, Clorox bleach, hydrogen peroxide, ethanol, isopropanol, Lysol, or Dawn Ultra at different concentrations. Syringes were either immediately tested for viable virus or stored at 4°C, 22°C, and 37°C for up to 21 days before viral infectivity was determined. Results. Most products tested reduced HCV infectivity to undetectable levels in insulin syringes. Bleach eliminated HCV infectivity in both syringes. Other disinfectants produced virus recovery ranging from high (5% ethanol, 77% ± 12% HCV-positive syringes) to low (1:800 Dawn Ultra, 7% ± 7% positive syringes) in tuberculin syringes. Conclusions. Household disinfectants tested were more effective in fixed-needle syringes (low residual volume) than in syringes with detachable needles (high residual volume). Bleach was the most effective disinfectant after 1 rinse, whereas other diluted household products required multiple rinses to eliminate HCV. Rinsing with water, 5% ethanol (as in beer), and 20% ethanol (as in fortified wine) was ineffective and should be avoided. Our data suggest that rinsing of syringes with household disinfectants may be an effective tool in preventing HCV transmission in PWID when done properly. PMID:26034767
Masarwa, Nader; Mohamed, Ahmed; Abou-Rabii, Iyad; Abu Zaghlan, Rawan; Steier, Liviu
2016-06-01
A systematic review and meta-analysis were performed to compare longevity of Self-Etch Dentin Bonding Adhesives to Etch-and-Rinse Dentin Bonding Adhesives. The following databases were searched for PubMed, MEDLINE, Web of Science, CINAHL, the Cochrane Library complemented by a manual search of the Journal of Adhesive Dentistry. The MESH keywords used were: "etch and rinse," "total etch," "self-etch," "dentin bonding agent," "bond durability," and "bond degradation." Included were in-vitro experimental studies performed on human dental tissues of sound tooth structure origin. The examined Self-Etch Bonds were of two subtypes; Two Steps and One Step Self-Etch Bonds, while Etch-and-Rinse Bonds were of two subtypes; Two Steps and Three Steps. The included studies measured micro tensile bond strength (μTBs) to evaluate bond strength and possible longevity of both types of dental adhesives at different times. The selected studies depended on water storage as the aging technique. Statistical analysis was performed for outcome measurements compared at 24 h, 3 months, 6 months and 12 months of water storage. After 24 hours (p-value = 0.051), 3 months (p-value = 0.756), 6 months (p-value=0.267), 12 months (p-value=0.785) of water storage self-etch adhesives showed lower μTBs when compared to the etch-and-rinse adhesives, but the comparisons were statistically insignificant. In this study, longevity of Dentin Bonds was related to the measured μTBs. Although Etch-and-Rinse bonds showed higher values at all times, the meta-analysis found no difference in longevity of the two types of bonds at the examined aging times. Copyright © 2016 Elsevier Inc. All rights reserved.
The effect of heparin rinse on the biocompatibility of continuous veno-venous hemodiafiltration.
Opatrný, K; Polanská, K; Krouzecký, A; Vít, L; Novák, I; Kasal, E
2002-06-01
The aims of our cross-over randomized study were (1) to assess hemostasis in patients with acute renal failure (ARF) and (2) to determine whether or not the generally recommended heparin rinse of the extracorporeal circuit (ECC) prior to the procedure affects thrombogenicity, complement activation, and leukocyte count in blood during continuous venovenous hemodiafiltration (CVVHDF). Eleven critically ill ARF patients were treated, in random order, using CVVHDF in postdilution setup following ECC rinse with saline (A) with heparin at a concentration of 2,000 IU/L (10 procedures), (B) with heparin at a concentration of 10,000 IU/L (7 procedures), and (C) without heparin (9 procedures). Except for the rinse, anticoagulation therapy did not differ in individual patients during the procedures. Blood was withdrawn before, and at minutes 15, 60, and 360 invariably at diafilter inlet and outlet. Compared with healthy individuals, patients showed lower blood thrombocyte counts (153 vs 233*10(9)/L, p<0.01, arithmetic means, Student's t test), longer aPTT (44 vs 36 s, p<0.05), higher plasma levels of heparin (0.1 vs 0.0 U/mL, p<0.05), D-dimer (1129 vs 36 ng/mL, p<0.001) and beta-thromboglobulin (BTG) (159 vs 37 U/mL, p<0.001) prior to CVVHDF. The comparison of procedures with different rinsing technique did not reveal any significant difference in their effects on blood thrombocyte and leukocyte counts, aPTT, plasma levels of heparin, BTG, thrombin-antithrombin III complexes, D-dimer, or the C5a complement component. (1) Patients indicated for CVVHDF show impaired hemostasis involving thrombocytes, coagulation, and fibrinolysis, (2) no beneficial effect of heparin rinse on CVVHDF ECC thrombogenicity, complement activation or blood leukocyte counts was demonstrated.
Wang, Lin; Huang, Xin-En; Ji, Zhu-Qing; Liu, Meng-Yan; Qian, Ting; Li, Li
2016-01-01
To assess the safety and effectiveness of a mouth-rinse with G-CSF (JiSaiXin, produced by NCPC Biotechnology Co., Ltd) in treating patients with chemotherapy-induced oral mucositis (CIM). A consecutive cohort of patients with advanced cancers and CIM were treated with mouth-rinse G-CSF. All chemotherapy for patients with advanced cancers was adopted from regimens suggested by NCCN guidelines. The mouth-rinse with G-CSF at a dose of 150-300ug plus 100ml-500ml normal saline was started from the time of oral mucositis was confirmed and continuously used for at least 7 days as one course. After at least two courses of treatment, safety and efficacy were evaluated. There were 7 female and 7 male patients with advanced cancer and CIM recruited into this study, including 5 with colorectal, 2 with lung, 1 patient with gastric, 1 with cervical and 1 with pancreatic cancer, as well as 2 patients with diffuse large B cell lymphomas, 1 with nasopharyngeal and 1 with gastric cancer. The median age was 57 (41-79) years. Grade 1 to 2 myelosuppression was observed in 3/14 patients, and Grade 4 myelosuppression in 1/14. Adverse effects on the gastrointestinal tract were documented in 5/14 patients, and were Grade 1 to Grade 3. No treatment related death was documented. Regarding CIM, the median response time to mouth rinse of G-CSF was 2 (1-5) days, and all patients with CIM demonstrated a positive response. Mouth-rinse with G-CSF proved to be safe and effective in treating patients with advanced cancers and CIM. However, further randomized controlled studies should be conducted to clarify the effectiveness of this treatment with other lesions.
The effect of compliance on contact lens case contamination.
Tilia, Daniel; Lazon de la Jara, Percy; Zhu, Hua; Naduvilath, Thomas J; Holden, Brien A
2014-03-01
To determine the efficacy of written instructions on contact lens case hygiene and to quantify the effect of noncompliance on contact lens case contamination. Data were retrospectively analyzed from 16 prospective, 3-month daily-wear studies during which six commercially available silicone hydrogel contact lenses and seven lens care solutions (LCS) were tested following a similar protocol. Verbal instructions regarding case hygiene (rinse case with LCS, not tap water) were given in nine studies, while the same instructions were given verbally and in written format in seven studies. A survey on contact lens, LCS, and lens case hygiene was completed at 1- and 3-month visits and compliance with case hygiene instructions was determined. Regular contact lens cases were used for 1 month and collected for microbial analysis at the 1- and 3-month visits. The rate of case contamination and the types of microbes contaminating cases were evaluated. Participants given verbal and written instructions were more likely to be compliant with case hygiene instructions than those just given verbal instructions (odds ratio [OR]: 2.19, p < 0.001, 95% confidence interval [CI]: 1.40-3.44). The overall case contamination rate was 79%. Use of tap water to rinse contact lens cases was associated with significantly more cases contaminated with Gram-negative bacteria (GNB) (30% vs. 10%, p < 0.001), a greater risk of GNB case contamination (OR: 2.91, p < 0.001. 95% CI: 1.72-4.92), and a higher quantity of GNB in cases (mean colony-forming unit/case ± SD: 28,286 ± 131,935 vs. 6477 ± 60,447, p < 0.001). Lens case hygiene can be improved by effective communication of instructions. Contact lens wearers should be actively discouraged from rinsing contact lens cases with tap water because of the increased risk of GNB contamination.
ETV REPORT AND VERIFICATION STATEMENT; EVALUATION OF LOBO LIQUIDS RINSE WATER RECOVERY SYSTEM
The Lobo Liquids Rinse Water Recovery System (Lobo Liquids system) was tested, under actual production conditions, processing metal finishing wastewater, at Gull Industries in Houston, Texas. The verification test evaluated the ability of the ion exchange (IX) treatment system t...
40 CFR 471.35 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2013 CFR
2013-07-01
... Fluoride 13.9 6.15 (w) Molten salt rinse. Subpart C—PSNS Pollutant or pollutant property Maximum for any 1... with molten salt Chromium 0.312 0.127 Nickel 0.464 0.312 Fluoride 50.2 22.3 (x) Ammonia rinse. Subpart...
40 CFR 471.35 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2012 CFR
2012-07-01
... Fluoride 13.9 6.15 (w) Molten salt rinse. Subpart C—PSNS Pollutant or pollutant property Maximum for any 1... with molten salt Chromium 0.312 0.127 Nickel 0.464 0.312 Fluoride 50.2 22.3 (x) Ammonia rinse. Subpart...
40 CFR 471.35 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2014 CFR
2014-07-01
... Fluoride 13.9 6.15 (w) Molten salt rinse. Subpart C—PSNS Pollutant or pollutant property Maximum for any 1... with molten salt Chromium 0.312 0.127 Nickel 0.464 0.312 Fluoride 50.2 22.3 (x) Ammonia rinse. Subpart...
Liga developer apparatus system
Boehme, Dale R.; Bankert, Michelle A.; Christenson, Todd R.
2003-01-01
A system to fabricate precise, high aspect ratio polymeric molds by photolithograpic process is described. The molds for producing micro-scale parts from engineering materials by the LIGA process. The invention is a developer system for developing a PMMA photoresist having exposed patterns comprising features having both very small sizes, and very high aspect ratios. The developer system of the present invention comprises a developer tank, an intermediate rinse tank and a final rinse tank, each tank having a source of high frequency sonic agitation, temperature control, and continuous filtration. It has been found that by moving a patterned wafer, through a specific sequence of developer/rinse solutions, where an intermediate rinse solution completes development of those portions of the exposed resist left undeveloped after the development solution, by agitating the solutions with a source of high frequency sonic vibration, and by adjusting and closely controlling the temperatures and continuously filtering and recirculating these solutions, it is possible to maintain the kinetic dissolution of the exposed PMMA polymer as the rate limiting step.
Clarke, Neil D; Thomas, James R; Kagka, Marion; Ramsbottom, Roger; Delextrat, Anne
2017-03-01
Clarke, ND, Thomas, JR, Kagka, M, Ramsbottom, R, and Delextrat, A. No dose-response effect of carbohydrate mouth rinse concentration on 5-km running performance in recreational athletes. J Strength Cond Res 31(3): 715-720, 2017-Oral carbohydrate rinsing has been demonstrated to provide beneficial effects on exercise performance of durations of up to 1 hour, albeit predominately in a laboratory setting. The aim of the present study was to investigate the effects of different concentrations of carbohydrate solution mouth rinse on 5-km running performance. Fifteen healthy men (n = 9; mean ± SD age; 42 ± 10 years; height, 177.6 ± 6.1 cm; body mass, 73.9 ± 8.9 kg) and women (n = 6; mean ± SD age, 43 ± 9 years; height, 166.5 ± 4.1 cm; body mass, 65.7 ± 6.8 kg) performed a 5-km running time trial on a track on 4 separate occasions. Immediately before starting the time trial and then after each 1 km, subjects rinsed 25 ml of 0, 3, 6, or 12% maltodextrin for 10 seconds. Mouth rinsing with 0, 3, 6, or 12% maltodextrin did not have a significant effect on the time to complete the time trial (0%, 26:34 ± 4:07 minutes:seconds; 3%, 27:17 ± 4:33 minutes:seconds; 6%, 27:05 ± 3:52 minutes:seconds; 12%, 26:47 ± 4.31 minutes:seconds; p = 0.071; (Equation is included in full-text article.)= 0.15), heart rate (p = 0.095; (Equation is included in full-text article.)= 0.16), rating of perceived exertion (p = 0.195; (Equation is included in full-text article.)= 0.11), blood glucose (p = 0.920; (Equation is included in full-text article.)= 0.01), and blood lactate concentration (p = 0.831; (Equation is included in full-text article.)= 0.02), with only nonsignificant trivial to small differences between concentrations. Results of this study suggest that carbohydrate mouth rinsing provides no ergogenic advantage over an acaloric placebo (0%) and that there is no dose-response relationship between carbohydrate solution concentration and 5-km track running performance.
Effect of chewing gums on the production of volatile sulfur compounds (VSC) in vivo.
Rösing, Cassiano K; Gomes, Sabrina C; Bassani, Diego G; Oppermann, Rui V
2009-01-01
The aim of the present study was to evaluate the effect of two chewing gums on the production of volatile sulfur-containing compounds (VSC) in vivo. Fourteen periodontally healthy participants (20-35 years old) were included in the test panel. Test gum 1 (TG1) contained sucrose and Test gum 2 (TG2) contained xylitol and zinc citrate. Two series of tests were conducted with a double-blind cross-over design. Following an overnight refrain from oral hygiene, VSC was measured before and at 5, 15, 30, 45 and 60 minutes of chewing the test gums. In the second series, VSC production was monitored prior to and up to 30 minutes after a rinse with cysteine 6 mM alone or after a rinse followed by chewing the test gums. For the first test, the results were analyzed by repeated measurements ANOVA for intra-group and paired sample t test for intergroup comparisons. In the second series, percent reduction of VSC was compared by Friedman and Wilcoxon tests (p < .05). The test gums did not differ in terms of VSC production, with values ranging from 146 ppb after 5 minutes to 86 ppb after 60 minutes. Similar reductions in VSC production following cysteine were observed for both test gums, with the largest reductions (71% to 52%) observed after 5 and 15 minutes. It can be concluded that VSC production is diminished after chewing gum and that the use of chewing gums reduces temporarily the VSC production enhanced by cysteine rinses.
Effects of metal salts on the oral production of volatile sulfur-containing compounds (VSC).
Young, A; Jonski, G; Rölla, G; Wåler, S M
2001-08-01
Halitosis, mainly caused by bacteria located on the posterior dorsum of the tongue and in periodontal pockets, is due to formation of volatile sulfur compounds (VSC). The hypothesis to be tested was that the affinity of a metal for sulfur determines its anti-VSC activity. Clinical tests were carried out on 12 subjects who rinsed with cysteine to induce halitosis (baseline) before rinsing with 7.34 mM ZnCl2, SnF2 and CuCl2. Mouth air VSC analyses were repeated following cysteine rinses at 1 h, 2 h and 3 h using a gas chromatograph. In vitro experiments tested toxic metals Hg2+, Pb2+ and Cd2+. 10-microl aliquots of metal salts were added to 1-ml aliquots of human whole saliva from 30 subjects. Samples were incubated overnight at 37oC and saliva headspace was analyzed for VSC in a gas chromatograph. Cu2+>Sn2+>Zn2+ (supports hypothesis). Zn2+ had significantly less anti-VSC effect compared with Cu2+ and Sn2+ at 1, 2 and 3 h. In vitro results indicated that Hg2+, Cu2+ and Cd2+ had close to 100% anti-VSC effect, and that Pb2+ was less effective and Cd2+ more effective than expected in inhibiting VSC. Apart from Hg2+ and Cu2+, the metals had a significantly greater effect on H2S than on CH3SH. Cu2+ and Hg2+ have well-known antibacterial activity and may presumably also operate by this mechanism.
Sodium hypochlorite (dilute chlorine bleach) oral rinse in patient self-care.
Rich, Sandra K; Slots, Jørgen
2015-01-01
Sodium hypochlorite (NaOCl), commonly known as "bleach," is widely accepted as being a safe and effective antiseptic against bacteria, fungi, and viruses. For over a century, bleach has been used to control or overcome infection in homes, hospitals, and even on battlefields, and in endodontics for disinfection of root canals. This paper reviews clinical studies on the efficacy of sodium hypochlorite oral rinse to combat dental plaque and gingival inflammation. Sodium hypochlorite is readily available as inexpensive household bleach, and we suggest that oral rinsing twice weekly with dilute bleach (0.25% sodium hypochlorite) constitutes a valuable adjunct to current methods of plaque removal.
Material Compatability with Threshold Limit Value Levels of Monomethyl Hydrazine
1988-10-26
supply was house- compressed air conditioned by passing through a series of demisters, a hot Hopcalite catalyst bed, a reciprocating dual-tower...recorded. At the end of a test, the tubing was rinsed with methanol and dried with compressed breathing air . Cleaning the tubing material between tests had...niecessary and identify by block wbr -’Materials were evaluated for potential use as ambient air sample lines for hydrazines. Fluorinated poly- mers
The Oxidative Stability of Deuterated Lubricants
1982-01-01
through the fluid at some elevated temperature Iand following the increase of viscosity, acidity , or peroxide concentration with time, or monitoring the...1to use, the cells were cleaned in a hot nitric/sulfuric acid bath, rinsed repeatedly with distilled water, and baked overnight in an oven. All sample J...detection), and acidity (by base titration). The gas evolution rate of the lubricant was measured continuously with the gas sensor and displayed on a
ZINC SLUDGE RECYCLING AFTER KASTONE TREATMENT OF CYANIDE-BEARING RINSE WATER
The purpose of this project was to demonstrate the feasibility of reclaiming sludge. The sludge was produced by the destruction of cyanide by Kastone in zinc-cyanide dragout rinse water. The clear supernatant was discharged to the municipal sewer and the sludge eventually recycle...
Microtensile bond strength of etch and rinse versus self-etch adhesive systems.
Hamouda, Ibrahim M; Samra, Nagia R; Badawi, Manal F
2011-04-01
The aim of this study was to compare the microtensile bond strength of the etch and rinse adhesive versus one-component or two-component self-etch adhesives. Twelve intact human molar teeth were cleaned and the occlusal enamel of the teeth was removed. The exposed dentin surfaces were polished and rinsed, and the adhesives were applied. A microhybride composite resin was applied to form specimens of 4 mm height and 6 mm diameter. The specimens were sectioned perpendicular to the adhesive interface to produce dentin-resin composite sticks, with an adhesive area of approximately 1.4 mm(2). The sticks were subjected to tensile loading until failure occurred. The debonded areas were examined with a scanning electron microscope to determine the site of failure. The results showed that the microtensile bond strength of the etch and rinse adhesive was higher than that of one-component or two-component self-etch adhesives. The scanning electron microscope examination of the dentin surfaces revealed adhesive and mixed modes of failure. The adhesive mode of failure occurred at the adhesive/dentin interface, while the mixed mode of failure occurred partially in the composite and partially at the adhesive/dentin interface. It was concluded that the etch and rinse adhesive had higher microtensile bond strength when compared to that of the self-etch adhesives. Copyright © 2010 Elsevier Ltd. All rights reserved.
Young, A; Jonski, G; Rölla, G
2003-08-01
Volatile sulphur compounds (VSC) are major components of oral malodour. As both zinc ions and cationic antibacterial agents inhibit the formation of oral VSC, this study aimed to determine whether these agents combined have synergistic anti-VSC actions. Baseline oral VSC measurements of mouth air from 10 volunteers following cysteine rinsing (6mM, pH 7.2) were obtained using gas chromatography (GC). Subjects rinsed for 1 min with 10ml of the test solutions, 0.3% zinc acetate (Zn), 0.025% chlorhexidine (CHX), 0.025% cetyl pyridinium (CPC), and the combinations Zn+CHX and Zn+CPC. Cysteine rinses were repeated at 1h, 2h and 3h and VSC measurements recorded. Three subjects rinsed with the Zn+CHX combination and fasted for 9h, undergoing cysteine rinses and VSC measurements at 3h intervals. 10 microl of the test solutions were also added to 1ml aliquots of human whole saliva (n=8). Following incubation at 37 degrees C for 24h VSC levels in the saliva headspace were measured by GC. Inhibition of VSC formation and the fractional inhibitory index indicating synergy were calculated. Zn+CHX mouthrinse had a synergistic anti-VSC effect, and was effective for at least 9h. Zn+CPC mouthrinse was less effective. Both combinations showed a synergistic inhibiting effect in-vitro. Synergy between Zn and the antibacterial agents confirms different mechanisms of operation.
Addy, M; al-Arrayed, F; Moran, J
1991-04-01
Discolouration of the teeth, tongue and dental restorative materials associated with the use of cationic antiseptics is still the limiting factor in long-term usage of antiplaque agents such as chlorhexidine. Oxidising agents have been used successfully to remove dental stain in animals, but products and regimens have not been evaluated in humans. These pilot studies in vitro and in vivo assessed a long-established oxidising mouthwash, based on peroxyborate, for stain removal from teeth and acrylic. The laboratory studies measured chlorhexidine tea stain removal from tooth and acrylic specimens. The oxidising agent markedly reduced staining on specimens. In a short-term clinical experiment, dental staining was forced over a 2 1/2-day period by reciprocal chlorhexidine and tea rinsing. 5 rinses with the oxidising mouthwash during the next 1 1/2 days dramatically reduced staining compared with water after rinses. Additionally, a single rinse with peroxyborate following the 5 water after rinses, again considerably reduced the residual staining. Effects on tongue staining were less impressive. Both experimental models produced findings consistent with those from the animal model. The results suggest proprietary oxidising mouthwashes could have a place in the control of dental stain associated with the use of chlorhexidine. Further studies to evaluate such products in a more conventional chlorhexidine regimen are indicated.
40 CFR 420.96 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2010 CFR
2010-07-01
...) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Acid Pickling...) Sulfuric acid pickling (spent acid solutions and rinse waters)—(1) Rod, wire, coil. Subpart I Pollutant or... operations. (b) Hydrochloric acid pickling (spent acid solutions and rinse waters)—(1) Rod, wire, coil...
40 CFR 420.95 - Pretreatment standards for existing sources (PSES).
Code of Federal Regulations, 2010 CFR
2010-07-01
...) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Acid Pickling... for existing sources. (a) Sulfuric acid (spent acid solutions and rinse waters)—(1) Rod, wire, and... pickling (spent acid solutions and rinse waters)—(1) Rod, wire, and coil. Subpart I Pollutant or pollutant...
Code of Federal Regulations, 2014 CFR
2014-04-01
... where the water supply contains 0 to 0.7 parts per million (ppm) fluoride ion. (i) Preventive treatment... rinse in a concentrated form to be mixed with water before using to result in the appropriate fluoride.... A fluoride treatment rinse prepared by adding the powder (a concentrated solid dosage form) to water...
Code of Federal Regulations, 2012 CFR
2012-04-01
... where the water supply contains 0 to 0.7 parts per million (ppm) fluoride ion. (i) Preventive treatment... rinse in a concentrated form to be mixed with water before using to result in the appropriate fluoride.... A fluoride treatment rinse prepared by adding the powder (a concentrated solid dosage form) to water...
Code of Federal Regulations, 2013 CFR
2013-04-01
... where the water supply contains 0 to 0.7 parts per million (ppm) fluoride ion. (i) Preventive treatment... rinse in a concentrated form to be mixed with water before using to result in the appropriate fluoride.... A fluoride treatment rinse prepared by adding the powder (a concentrated solid dosage form) to water...
Al-Attas, Safia A; Amro, Soliman O
2010-01-01
Candidal colonization in diabetics is a matter of debate. The aim of this study is to investigate oral candidal colonization, strain diversity, antifungal susceptibility, and the influence of local and systemic host factors on candidal colonization in adult diabetics. We conducted a case-control study that compared 150 diabetics (49 type 1, 101 type 2) with 50 healthy controls. Two salivary samples were collected, using the oral rinse sampling method: one for salivary flow rate and pH determination, and the other for candidal colonization assessment. The candidal isolates were identified and tested in vitro for antifungal susceptibility using the commercial kit, Candifast. The relationship between specific host factors and candidal colonization was also investigated. Diabetics had a higher candidal carriage rate compared to controls, but not density. Candida albicans was the most frequently isolated species, but diabetics had a variety of other candidal species present. None of the control samples were resistant to any tested antifungal, while the diabetic samples had differing resistances to azole antifungals. Although there was a significant positive correlation between glycemic control and candidal colonization in type 2 diabetics, there was a negative correlation between salivary pH and candidal carriage in the controls versus density in type 2 diabetics. Diabetic patients not only had a higher candidal carriage rate, but also a variety of candidal species that were resistant to azole antifungals. Oral candidal colonization was significantly associated with glycemic control, type of diabetes, and salivary pH.
Zehavi, D; Seiber, J N
1996-10-01
An analytical method has been developed for the determination of trace levels of trifluoroacetic acid (TFA), an atmospheric breakdown product of several of the hydrofluorocarbon (HFC) and hydrochlorofluorocarbon (HCFC) replacements for the chlorofluorocarbon (CFC) refrigerants, in water and air. TFA is derivatized to the volatile methyl trifluoroacetate (MTFA) and determined by automated headspace gas chromatography (HSGC) with electron-capture detection or manual HSGC using GC/MS in the selected ion monitoring (SIM) mode. The method is based on the reaction of an aqueous sample containing TFA with dimethyl sulfate (DMS) in concentrated sulfuric acid in a sealed headspace vial under conditions favoring distribution of MTFA to the vapor phase. Water samples are prepared by evaporative concentration, during which TFA is retained as the anion, followed by extraction with diethyl ether of the acidified sample and then back-extraction of TFA (as the anion) in aqueous bicarbonate solution. The extraction step is required for samples with a relatively high background of other salts and organic materials. Air samples are collected in sodium bicarbonate-glycerin-coated glass denuder tubes and prepared by rinsing the denuder contents with water to form an aqueous sample for derivatization and analysis. Recoveries of TFA from spiked water, with and without evaporative concentration, and from spiked air were quantitative, with estimated detection limits of 10 ng/mL (unconcentrated) and 25 pg/mL (concentrated 250 mL:1 mL) for water and 1 ng/m(3) (72 h at 5 L/min) for air. Several environmental air, fogwater, rainwater, and surface water samples were successfully analyzed; many showed the presence of TFA.
Effective Reuse of Electroplating Rinse Wastewater by Combining PAC with H2O2/UV Process.
Yen, Hsing Yuan; Kang, Shyh-Fang; Lin, Chen Pei
2015-04-01
This study evaluated the performance of treating electroplating rinse wastewater by powder activated carbon (PAC) adsorption, H2O2/UV oxidation, and their combination to remove organic compounds and heavy metals. The results showed that neither the process of PAC adsorption nor H2O2/UV oxidation could reduce COD to 100 mg/L, as enforced by the Taiwan Environmental Protection Agency. On the other hand, the water sample treated by the combined approach of using PAC (5 g/L) pre-adsorption and H2O2/UV post-oxidation (UV of 64 W, H2O2 of 100 mg/L, oxidation time of 90 min), COD and DOC were reduced to 8.2 mg/L and 3.8 mg/L, respectively. Also, the combined approach reduced heavy metals to meet the effluent standards and to satisfy the in-house water reuse criteria for the electroplating factory. The reaction constant analysis indicated that the reaction proceeded much more rapidly for the combined process. Hence, it is a more efficient, economic and environmentally friendly process.
Rapid Single-Cell Electroporation for Labeling Organotypic Cultures
2010-06-01
carry out SCE on the tissue slice under visual control from the user. When the user wishes to transfect a new compound , the entire micromanipulator...a new compound by a perpendicular long-travel linear stage (H). Each sub-system is discussed below in detail including development and choice of...stage where a cleaning bath is moved in. The tip is inserted into the bath and cleaned/rinsed (E) before sampling a new compound and repeating (A). Af D
1995-03-01
Monitoring Well Installation ....................................... 2-8 2.1.3.1 Well Materials Decontamination ..................... 2-9 2.1.3.2 Well...event, with a clean water/phosphate-free detergent mix and a clean water rinse. All well completion materials were factory sealed. All... materials were not stored near or in areas which could be affected by these substances. 2.1.2.3 Drilling and Soil Sampling Drilling was accomplished by using
Vibbert, Hunter B; Ku, Seockmo; Li, Xuan; Liu, Xingya; Ximenes, Eduardo; Kreke, Thomas; Ladisch, Michael R; Deering, Amanda J; Gehring, Andrew G
2015-01-01
Microfiltration of chicken extracts has the potential to significantly decrease the time required to detect Salmonella, as long as the extract can be efficiently filtered and the pathogenic microorganisms kept in a viable state during this process. We present conditions that enable microfiltration by adding endopeptidase from Bacillus amyloliquefaciens to chicken extracts or chicken rinse, prior to microfiltration with fluid flow on both retentate and permeate sides of 0.2 μm cutoff polysulfone and polyethersulfone hollow fiber membranes. After treatment with this protease, the distribution of micron, submicron, and nanometer particles in chicken extracts changes so that the size of the remaining particles corresponds to 0.4-1 μm. Together with alteration of dissolved proteins, this change helps to explain how membrane fouling might be minimized because the potential foulants are significantly smaller or larger than the membrane pore size. At the same time, we found that the presence of protein protects Salmonella from protease action, thus maintaining cell viability. Concentration and recovery of 1-10 CFU Salmonella/mL from 400 mL chicken rinse is possible in less than 4 h, with the microfiltration step requiring less than 25 min at fluxes of 0.028-0.32 mL/cm(2) min. The entire procedure-from sample processing to detection by polymerase chain reaction-is completed in 8 h. © 2015 American Institute of Chemical Engineers.
Fatty acid profile of the initial oral biofilm (pellicle): an in-situ study.
Reich, Marco; Kümmerer, Klaus; Al-Ahmad, Ali; Hannig, Christian
2013-09-01
The first step of bioadhesion on dental surfaces is the formation of the acquired pellicle. This mainly acellular layer is formed instantaneously on all solid surfaces exposed to oral fluids. It is composed of proteins, glycoproteins and lipids. However, information on the lipid composition is sparse. The aim of the present study was to evaluate the fatty acid (FA) profile of the in-situ pellicle for the first time. Furthermore, the impact of rinses with safflower oil on the pellicle's FA composition was investigated. Pellicles were formed in situ on bovine enamel slabs mounted on individual upper jaw splints. The splints were carried by ten subjects over durations of 3-240 min. After comprehensive sample preparation, gas chromatography coupled with electron impact ionization mass spectrometry (GC-EI/MS) was used in order to characterize qualitatively and quantitatively a wide range of FA (C12-C24). The relative FA profiles of the pellicle samples gained from different subjects were remarkably similar, whereas the amount of FA showed significant interindividual variability. An increase in FA in the pellicle was observed over time. The application of rinses with safflower oil resulted in an accumulation of its specific FA in the pellicle. Pellicle formation is a highly selective process that does not correlate directly with salivary composition, as shown for FA.
Tracking sources of Clostridium botulinum type E contamination in seal meat.
Leclair, Daniel; Farber, Jeffrey M; Pagotto, Franco; Suppa, Sandy; Doidge, Bill; Austin, John W
2017-01-01
Botulism in Nunavik, Quebec is associated with the consumption of aged marine mammal meat and fat. The objective was to identify meat handling practices presenting a risk of contamination of seal meat with C. botulinum. Potential sources of contamination were assessed through interviews with igunaq producers from five communities of Nunavik. These sources were verified by detection and isolation of C. botulinum from igunaq prepared in the field from seal carcasses. Interviews indicated practices presenting a risk for contamination included: placing meat or fat on coastal rocks, using seawater for rinsing, and ageing meat in inverted seal skin pouches. Although the presence of C. botulinum type E spores was detected in only two of 32 (6.3%) meat or fat samples collected during the butchering process, two of four igunaq preparations from these samples contained type E botulinum toxin. Analysis of C. botulinum type E isolates recovered from these preparations indicated that shoreline soil may be a source of contamination. Seal meat and fat may be contaminated with C. botulinum type E during the butchering process. Measures can be adopted to reduce the risks of contamination in the field and possibly decrease the incidence of type E botulism in Nunavik.
21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.
Code of Federal Regulations, 2010 CFR
2010-04-01
...) of sodium peroxide is then added to the cup. The bomb is assembled and ignition is conducted in the usual fashion. (d) After the bomb has cooled, it is rinsed thoroughly with distilled water and disassembled. The top of the bomb is rinsed into a 250-milliliter beaker with distilled water. The beaker is...
USDA-ARS?s Scientific Manuscript database
Salmonella diversity on broiler carcasses has received significant attention in recent years, due to emphasis being placed on recovery of certain serotypes related to human attribution studies. The objective of this study was to evaluate Salmonella diversity from broiler carcass rinses by two culti...
NASA Technical Reports Server (NTRS)
Keen, Jill M.; Evans, Kurt B.; Schiffman, Robert L.; Deweese, C. Darrell; Prince, Michael E.
1995-01-01
Experimental design testing was conducted to identify critical parameters of an aqueous spray process intended for cleaning solid rocket motor metal components (steel and aluminum). A two-level, six-parameter, fractional factorial matrix was constructed and conducted for two cleaners, Brulin 815 GD and Diversey Jettacin. The matrix parameters included cleaner temperature and concentration, wash density, wash pressure, rinse pressure, and dishwasher type. Other spray parameters: nozzle stand-off, rinse water temperature, wash and rinse time, dry conditions, and type of rinse water (deionized) were held constant. Matrix response testing utilized discriminating bond specimens (fracture energy and tensile adhesion strength) which represent critical production bond lines. Overall, Jettacin spray cleaning was insensitive to the range of conditions tested for all parameters and exhibited bond strengths significantly above the TCA test baseline for all bond lines tested. Brulin 815 was sensitive to cleaning temperature, but produced bond strengths above the TCA test baseline even at the lower temperatures. Ultimately, the experimental design database was utilized to recommend process parameter settings for future aqueous spray cleaning characterization work.
In vitro mitochondrial test to assess haemodialyser biocompatibility.
Tabouy, L J; Chauvet-Monges, A M; Brunet, P J; Braguer, D L; García, P A; Berland, Y F; Crevat, A D
1997-08-01
This paper describes an in vitro mitochondrial test to assess the biocompatibility of haemodialysers. We tested on isolated liver mitochondria the effect of solutions obtained by an aqueous rinse of different haemodialysers (cuprophane, cellulose acetate, Hemophan, polyacrylonitrile, polymethylmethacrylate, polysulphone, polyamide). Moreover, to determine the penetration into the cell and the cytotoxicity of these solutions from haemodialysers, we examined the effect of rinse solutions on HT29-D4 cells. Our results showed that rinse solutions from haemodialysers decrease the mitochondrial ATP synthesis. Cuprophane has the most marked effect, and the synthetic membranes exhibited only mild effects. Rinse solutions penetrated the cell and were cytotoxic by acting on mitochondria in the cell. In this respect, cellulosic membranes were the most toxic. Taken together our findings lead to a classification of haemodialyser membranes which is identical to one based on criteria such as activation of complement (cuprophane > other cellulosics > synthetics). Moreover isolated mitochondria make it possible to differentiate among the synthetic membranes. Isolated mitochondria thus appear to be a good in vitro test to assess the biocompatibility of haemodialysers.
Nevers, Meredith; Przybyla-Kelly, Kasia; Spoljaric, Ashley; Shively, Dawn A.; Whitman, Richard L.; Byappanahalli, Muruleedhara
2016-01-01
We investigated the occurrence, persistence, and growth potential of Escherichia coli associated with freshwater organic debris (i.e., wrack) frequently deposited along shorelines (shoreline wrack), inputs from rivers (river CPOM), and parking lot runoffs (urban litter). Samples were collected from 9 Great Lakes beaches, 3 creeks, and 4 beach parking lots. Shoreline wrack samples were mainly composed of wood chips, straw, sticks, leaf litter, seeds, feathers, and mussel shells; creek and parking lot samples included dry grass, straw, seeds, wood chips, leaf/pine needle litter; soil particles were present in parking lot samples only. E. coli concentrations (most probable number, MPN) were highly variable in all sample types: shoreline wrack frequently reached 105/g dry weight (dw), river CPOM ranged from 81 to 7,916/g dw, and urban litter ranged from 0.5 to 24,952/g dw. Sequential rinsing studies showed that 61–87% of E. coli concentrations were detected in the first wash of shoreline wrack, with declining concentrations associated with 4–8 subsequent washings; viable counts were still detected even after 8 washes. E. coli grew readily in shoreline wrack and river CPOM incubated at 35 °C. At 30°C, growth was only detected in river CPOM and not in shoreline wrack or urban litter, but the bacteria persisted for at least 16 days. In summary, freshwater wrack is an understudied component of the beach ecosystem that harbors E. coli and thus likely influences estimations of water quality and the microbial community in the nearshore as a result of transfer between environments.
Application of a capsaicin rinse in the treatment of burning mouth syndrome
Silvestre-Rangil, Javier; Tamarit-Santafé, Carmen; Bautista, Daniel
2012-01-01
Objective: To examine the efficacy of a new topical capsaicin presentation as an oral rinse in improving the symptoms of burning mouth syndrome (BMS). Study design: A prospective, double-blind, cross-over study was made of 30 patients with BMS. There were 7 dropouts; the final study series thus comprised 23 individuals. The patients were randomized to two groups: (A) capsaicin rinse (0.02%) or (B) placebo rinse, administered during one week. After a one-week washout period, the patients were then assigned to the opposite group. Burning discomfort was scored using a visual analog scale (VAS): in the morning before starting the treatment, in the afternoon on the first day of treatment, and at the end of the week of treatment in the morning and in the afternoon. The same scoring sequence was again applied one week later with the opposite rinse. Results: The mean patient age was 72.65 ± 12.10 years, and the duration of BMS was 5.43 ± 3.23 years on average. Significant differences in VAS score were recorded in the capsaicin group between baseline in the morning (AM1) or afternoon (AA1) and the end of the week of treatment (AA7)(p=0.003 and p=0.002, respectively). Conclusion: The topical application of capsaicin may be useful in treating the discomfort of BMS, but has some limitations. Key words: Burning mouth syndrome, stomatodynia, capsaicin, treatment, clinical management. PMID:21743415
Orthodontic instrument sterilization with microwave irradiation.
Yezdani, Arif; Mahalakshmi, Krishnan; Padmavathy, Kesavaram
2015-04-01
This study was designed to evaluate the efficiency of microwave sterilization of orthodontic instruments and molar bands immersed in plain distilled water with and without oral rinse, and to ascertain the minimum time of exposure required to sterilize. The orthodontic instruments (hinged and nonhinged), molar bands and mouth mirrorsused in the patient 's mouth were selected for the study. The instruments were divided into two groups - Group I with oral rinse-set A (0.01% chlorhexidine gluconate) and set B (0.025% betadine) and Group II (included sets C and D without oral rinse). The instruments of set A, B and C were microwaved at 2,450 MHz, 800 W for 5 min, whereas, set D was microwaved for 10 min at the same above mentioned specifications. The efficacy of sterilization was assessed by stab inoculation of the instruments onto trypticase soya agar plates. The plates were checked for bacterial growth following incubation at 37 °C for 24 h. For sterility control,Geobacillus stearothermophilus (MTCC 1518) was included. No growth was observed in the plates that were inoculated with the microwaved orthodontic instruments of sets A, B and D, whereas scanty bacterial growth was observed in the plates inoculatedwith the microwaved set C instruments. Effective sterilization was achieved when the orthodontic instruments and molar bands were immersed in distilled water without oral rinse and microwaved for 10 min as also for those that were immersed in distilled water with oral rinse and microwaved for 5 min.
Orthodontic instrument sterilization with microwave irradiation
Yezdani, Arif; Mahalakshmi, Krishnan; Padmavathy, Kesavaram
2015-01-01
Objective: This study was designed to evaluate the efficiency of microwave sterilization of orthodontic instruments and molar bands immersed in plain distilled water with and without oral rinse, and to ascertain the minimum time of exposure required to sterilize. Materials and Methods: The orthodontic instruments (hinged and nonhinged), molar bands and mouth mirrorsused in the patient 's mouth were selected for the study. The instruments were divided into two groups – Group I with oral rinse-set A (0.01% chlorhexidine gluconate) and set B (0.025% betadine) and Group II (included sets C and D without oral rinse). The instruments of set A, B and C were microwaved at 2,450 MHz, 800 W for 5 min, whereas, set D was microwaved for 10 min at the same above mentioned specifications. The efficacy of sterilization was assessed by stab inoculation of the instruments onto trypticase soya agar plates. The plates were checked for bacterial growth following incubation at 37 °C for 24 h. For sterility control,Geobacillus stearothermophilus (MTCC 1518) was included. Results: No growth was observed in the plates that were inoculated with the microwaved orthodontic instruments of sets A, B and D, whereas scanty bacterial growth was observed in the plates inoculatedwith the microwaved set C instruments. Conclusion: Effective sterilization was achieved when the orthodontic instruments and molar bands were immersed in distilled water without oral rinse and microwaved for 10 min as also for those that were immersed in distilled water with oral rinse and microwaved for 5 min. PMID:26015686
Performance of Prototype High-Flow Inhalable Dust Sampler in a Livestock Production Facility
Anthony, T. Renée; Cai, Changjie; Mehaffy, John; Sleeth, Darrah; Volckens, John
2017-01-01
A high-flow inhalable sampler, designed for operational flow rates up to 10 L/min using computer simulations and examined in wind tunnel experiments, was evaluated in the field. This prototype sampler was deployed in collocation with an IOM (the benchmark standard sampler) in a swine farrowing building to examine the sampling performance for assessing concentrations of inhalable particulate mass and endotoxin. Paired samplers were deployed for 24-hours on 19 days over a three-month period. On each sampling day, the paired samplers were deployed at three fixed locations and data were analyzed to identify agreement and to examine systematic biases between concentrations measured by these samplers. Thirty-six paired gravimetric samples were analyzed; insignificant, unsubstantial differences between concentrations were identified between the two samplers (p=0.16; mean difference 0.03 mg/m3). Forty-four paired samples were available for endotoxin analysis, and a significant (p=0.001) difference in endotoxin concentration was identified: the prototype sampler, on average, had 120 EU/m3 more endotoxin than did the IOM samples. Since the same gravimetric samples were analyzed for endotoxin content, the endotoxin difference is likely attributable to differences in endotoxin extraction. The prototype’s disposable thin-film polycarbonate capsule was included with the filter in the 1-hour extraction procedure while the internal plastic cassette of the IOM required a rinse procedure that is susceptible to dust losses. Endotoxin concentrations measured with standard plastic IOM inserts that follow this rinsing procedure may underestimate the true endotoxin exposure concentrations. The maximum concentrations in the study (1.55 mg/m3 gravimetric, 2328 EU/m3 endotoxin) were lower than other agricultural or industrial environments. Future work should explore the performance of the prototype sampler in dustier environments, where concentrations approach particulates not otherwise specified (PNOS) limits of 10 mg/m3, including using the prototype as a personal sampler. PMID:27792469
Performance of prototype high-flow inhalable dust sampler in a livestock production facility.
Anthony, T Renée; Cai, Changjie; Mehaffy, John; Sleeth, Darrah; Volckens, John
2017-05-01
A high-flow inhalable sampler, designed for operational flow rates up to 10 L/min using computer simulations and examined in wind tunnel experiments, was evaluated in the field. This prototype sampler was deployed in collocation with an IOM (the benchmark standard sampler) in a swine farrowing building to examine the sampling performance for assessing concentrations of inhalable particulate mass and endotoxin. Paired samplers were deployed for 24 hr on 19 days over a 3-month period. On each sampling day, the paired samplers were deployed at three fixed locations and data were analyzed to identify agreement and to examine systematic biases between concentrations measured by these samplers. Thirty-six paired gravimetric samples were analyzed; insignificant, unsubstantial differences between concentrations were identified between the two samplers (p = 0.16; mean difference 0.03 mg/m 3 ). Forty-four paired samples were available for endotoxin analysis, and a significant (p = 0.001) difference in endotoxin concentration was identified: the prototype sampler, on average, had 120 EU/m 3 more endotoxin than did the IOM samples. Since the same gravimetric samples were analyzed for endotoxin content, the endotoxin difference is likely attributable to differences in endotoxin extraction. The prototype's disposable thin-film polycarbonate capsule was included with the filter in the 1-hr extraction procedure while the internal plastic cassette of the IOM required a rinse procedure that is susceptible to dust losses. Endotoxin concentrations measured with standard plastic IOM inserts that follow this rinsing procedure may underestimate the true endotoxin exposure concentrations. The maximum concentrations in the study (1.55 mg/m 3 gravimetric, 2328 EU/m 3 endotoxin) were lower than other agricultural or industrial environments. Future work should explore the performance of the prototype sampler in dustier environments, where concentrations approach particulates not otherwise specified (PNOS) limits of 10 mg/m 3 , including using the prototype as a personal sampler.
Effect of enamel etching time on roughness and bond strength.
Barkmeier, Wayne W; Erickson, Robert L; Kimmes, Nicole S; Latta, Mark A; Wilwerding, Terry M
2009-01-01
The current study examined the effect of different enamel conditioning times on surface roughness and bond strength using an etch-and-rinse system and four self-etch adhesives. Surface roughness (Ra) and composite to enamel shear bond strengths (SBS) were determined following the treatment of flat ground human enamel (4000 grit) with five adhesive systems: (1) Adper Single Bond Plus (SBP), (2) Adper Prompt L-Pop (PLP), (3) Clearfil SE Bond (CSE), (4) Clearfil S3 Bond (CS3) and (5) Xeno IV (X4), using recommended treatment times and an extended treatment time of 60 seconds (n = 10/group). Control groups were also included for Ra (4000 grit surface) and SBS (no enamel treatment and Adper Scotchbond Multi-Purpose Adhesive). For surface roughness measurements, the phosphoric acid conditioner of the SBP etch-and-rinse system was rinsed from the surface with an air-water spray, and the other four self-etch adhesive agents were removed with alternating rinses of water and acetone. A Proscan 2000 non-contact profilometer was used to determine Ra values. Composite (Z100) to enamel bond strengths (24 hours) were determined using Ultradent fixtures and they were debonded with a crosshead speed of 1 mm/minute. The data were analyzed with ANOVA and Fisher's LSD post-hoc test. The etch-and- rinse system (SBP) produced the highest Ra (microm) and SBS (MPa) using both the recommended treatment time (0.352 +/- 0.028 microm and 40.5 +/- 6.1 MPa) and the extended treatment time (0.733 +/- 0.122 microm and 44.2 +/- 8.2 MPa). The Ra and SBS of the etch-and-rinse system were significantly greater (p < 0.05) than all the self-etch systems and controls. Increasing the treatment time with phosphoric acid (SBP) and PLP produced greater surface roughness (p < 0.05) but did not result in significantly higher bond strengths (p > 0.05).
Immediate bonding properties of universal adhesives to dentine.
Muñoz, Miguel Angel; Luque, Issis; Hass, Viviane; Reis, Alessandra; Loguercio, Alessandro Dourado; Bombarda, Nara Hellen Campanha
2013-05-01
To evaluate the dentine microtensile bond strength (μTBS), nanoleakage (NL), degree of conversion (DC) within the hybrid layer for etch-and-rinse and self-etch strategies of universal simplified adhesive systems. forty caries free extracted third molars were divided into 8 groups for μTBS (n=5), according to the adhesive and etching strategy: Clearfil SE Bond [CSE] and Adper Single Bond 2 [SB], as controls; Peak Universal Adhesive System, self-etch [PkSe] and etch-and-rinse [PkEr]; Scotchbond Universal Adhesive, self-etch [ScSe] and etch-and-rinse [ScEr]; All Bond Universal, self-etch [AlSe] and etch-and-rinse [AlEr]. After restorations were constructed, specimens were stored in water (37°C/24h) and then resin-dentine sticks were prepared (0.8mm(2)). The sticks were tested under tension at 0.5mm/min. Some sticks from each tooth group were used for DC determination by micro-Raman spectroscopy or nanoleakage evaluation (NL). The pH for each solution was evaluated using a pH metre. Data were analyzed with one-way ANOVA and Tukey's test (α=0.05). For μTBS, only PkSe and PkEr were similar to the respective control groups (p>0.05). AlSe showed the lowest μTBS mean (p<0.05). For NL, ScEr, ScSe, AlSe, and AlEr showed the lowest NL similar to control groups (p<0.05). For DC, only ScSe showed lower DC than the other materials (p<0.05). Performance of universal adhesives was shown to be material-dependent. The results indicate that this new category of universal adhesives used on dentine as either etch-and-rinse or self-etch strategies were inferior as regards at least one of the properties evaluated (μTBS, NL and DC) in comparison with the control adhesives (CSE for self-etch and SB for etch-and-rinse). Copyright © 2013 Elsevier Ltd. All rights reserved.
Iwakura, Maria Luiza Hiromi; Morita, Maria Celeste
2004-04-01
To compare the prevalence of dental caries in two groups of schoolchildren: (1) schoolchildren participating in a weekly 0.2% sodium fluoride mouth-rinsing program and (2) schoolchildren not participating in the program. This cross-sectional study was conducted in the city (municipality) of Londrina, in the state of Paraná, Brazil; the city has fluoridated drinking water. We examined 367 12-year-old children: 190 participants in the weekly mouth-rinsing program (51.8%) and 177 nonparticipants (48.2%). The prevalence of caries was determined based on the scores for decayed, missing, and filled teeth and for decayed, missing, and filled surfaces. The examinations were performed by three examiners, with nearly perfect agreement in their diagnosis of caries (kappa = 0.90). The dependent variable was dental caries. The independent variables were: participation or nonparticipation in the mouth-rinsing program, attending a private school or a public school, frequency of tooth-brushing, amount of toothpaste used, consumption of sweets between meals, and visits to the dentist. The decayed, missing, and filled teeth score (mean and standard deviation) at 12 years of age was 0.85 +/- 0.059 overall, 1.0 +/- 0.058 for program participants, and 0.70 +/- 0.060 for nonparticipants. The decayed, missing, and filled surfaces score (mean and standard deviation) was 1.16 +/- 0.017, with it ranging from a low of 0.34 in one private school to a high of 1.66 in one public school. Bivariate analysis showed an association between caries (P < 0.05) and the following variables: attending a public school, participating in the mouth-rinsing program, and consuming sweets between meals more than once a day. In the multivariate analysis, attending a public school (P = 0.0004) and consuming sweets (P = 0.001) remained associated with the presence of caries. The weekly mouth-rinsing program was not associated with a decreased prevalence of caries, in either the public schools or the private schools. However, additional research is needed to assess the cost-effectiveness of fluoride mouthrinsing programs in populations with a higher prevalence of caries. Given the caries prevalence that we found in the schoolchildren whom we studied, the resources allocated to the fluoride mouth-rinsing program for them should probably be used to pay for other health-promotion activities with them.
Stability of ramipril in water, apple juice, and applesauce.
Allen, L V; Stiles, M L; Prince, S J; McLaury, H J; Sylvestri, M F
1995-11-01
The stability of ramipril in water, in apple juice, and in applesauce was studied. The contents of a single capsule each of ramipril 1.25, 2.5, and 5 mg were mixed in glass beakers with 120 mL of deionized and filtered water, apple juice, or applesauce. Each mixture was apportioned into 10 120-mL amber polyethylene terephthalate (PET) containers. Five of the containers in each set were stored at 23 degrees C, and samples were taken at 0, 1, 2, 6, 12, and 24 hours. The other five containers were stored at 3 degrees C, and samples were taken at 4, 8, 12, 24, and 48 hours. The samples were analyzed for ramipril concentration by stability-indicating high-performance liquid chromatography (HPLC). The quantity of drug remaining in the PET container after "administration" was determined by mixing the contents of single 5-mg ramipril capsules with 60 mL of apple juice, pouring the mixture into a waste receptacle, rinsing the PET container three separate times with 10 mL of water, and analyzing the pooled fluid from these rinses for ramipril concentration by HPLC. Under no condition did the percentage of ramipril remaining drop below 90%. No peaks for degradation products appeared in the chromatograms. The mean +/- S.D. quantity of ramipril remaining in the PET containers after draining was 0.3 +/- 0.3% for the apple juice. Ramipril from 1.25-, 2.5-, and 5-mg capsules mixed in water, in apple juice, and in applesauce was stable for 24 hours at 23 degrees C and for 48 hours at 3 degrees C.
Salmonella spp. on chicken carcasses in processing plants in Poland.
Mikołajczyk, Anita; Radkowski, Mieczysław
2002-09-01
Chickens at selected points in the slaughter process and after slaughter on the dressing line in poultry plants were sampled and analyzed for Salmonella. These chickens came from the northeast part of Poland. The examinations were carried out in quarters I, II, III, and IV of 1999. All the birds were determined to be healthy by a veterinary inspection. Swab samples were taken from the cloaca after stunning and from the skin surface and body cavity of the whole bird after evisceration, after rinsing at the final rinse station but before chilling in the spin-chiller, and after cooling in the continuous cooling plant at the end of the production day. In 1999, 400 whole chickens were examined. The percentage of these 400 chickens from which Salmonella spp. were isolated was relatively high (23.75%; Salmonella-positive results were observed in 95 cases). Salmonella spp. were found after stunning in 6% of the chickens (6 of 100 samples), after evisceration in 24% (24 of 100), before cooling in 52% (52 of 100), and after cooling in 13% (13 of 100). These results show that Salmonella spp. were found more often at some processing points than at others. The lowest Salmonella spp. contamination rate (6%) for slaughter birds was found after stunning, and the highest contamination rate was found before chilling (52%). The serological types of Salmonella spp. isolated from whole chickens were Salmonella Enteritidis, Salmonella Typhimurium, Salmonella Saintpaul, Salmonella Agona, and Salmonella Infantis. The results of these investigations indicate that Salmonella Enteritidis is the dominant serological type in infections of slaughter chickens, as it is in many countries.
An SPR based sensor for allergens detection.
Ashley, J; Piekarska, M; Segers, C; Trinh, L; Rodgers, T; Willey, R; Tothill, I E
2017-02-15
A simple, sensitive and label-free optical sensor method was developed for allergens analysis using α-casein as the biomarker for cow's milk detection, to be used directly in final rinse samples of cleaning in place systems (CIP) of food manufacturers. A Surface Plasmon Resonance (SPR) sensor chip consisting of four sensing arrays enabling the measurement of samples and control binding events simultaneously on the sensor surface was employed in this work. SPR offers several advantages in terms of label free detection, real time measurements and superior sensitivity when compared to ELISA based techniques. The gold sensor chip was used to immobilise α-casein-polyclonal antibody using EDC/NHS coupling procedure. The performance of the assay and the sensor was first optimised and characterised in pure buffer conditions giving a detection limit of 58ngmL -1 as a direct binding assay. The assay sensitivity can be further improved by using sandwich assay format and amplified with nanoparticles. However, at this stage this is not required as the detection limit achieved exceeded the required allergens detection levels of 2µgmL -1 for α-S1-casein. The sensor demonstrated good selectivity towards the α-casein as the target analyte and adequate recoveries from CIP final rinse wash samples. The sensor would be useful tool for monitoring allergen levels after cleaning procedures, providing additional data that may better inform upon wider food allergen risk management decision(s) that are made by food manufacturer. In particular, this sensor could potentially help validate or optimise cleaning practices for a given food manufacturing process. Copyright © 2016 Elsevier B.V. All rights reserved.
Growth of Salmonella during sprouting of alfalfa seeds associated with salmonellosis outbreaks.
Stewart, D S; Reineke, K F; Ulaszek, J M; Tortorello, M L
2001-05-01
Growth of Salmonella was assessed during sprouting of naturally contaminated alfalfa seeds associated with two outbreaks of salmonellosis. Salmonella was determined daily in sprouts and sprout rinse water samples by a three-tube most probable number (MPN) procedure and a commercial enzyme immunoassay (EIA). Growth of Salmonella in the sprouts was reflected in the rinse water, and the MPNs of the two samples were generally in agreement within approximately 1 log. The results from EIA testing of sprouts and water samples were also in agreement. The pathogen was present in the seed at less than 1 MPN/g, and it increased in number to maximum population levels of 102 to 10(3) MPN/g in one seed lot and 10(2) to 10(4) MPN/ g in the other seed lot. Maximum populations of the pathogen were apparent by day 2 of sprouting. These results show the ability of the pathogen to grow to detectable levels during the sprouting process, and they provide support for the recommendation to test the sprout water for the presence of pathogens 48 h after starting seed sprouting. The effectiveness of a 10-min, 20,0000-microg/ml (ppm) calcium hypochlorite treatment of the outbreak-associated seeds was studied. For both seed lots, the hypochlorite treatment caused a reduction, but not elimination, of Salmonella contamination in the finished sprouts. These results confirm the need to test each production batch for the presence of pathogens, even after 20,000 microg/ml (ppm) hypochlorite treatment of seeds, so that contaminated product is not distributed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ros-Llor, Irene; Lopez-Jornet, Pia, E-mail: majornet@um.es
Objectives: The aim of this study was to evaluate DNA damage and cytokinetic defects, proliferative potential and cell death caused by the frequent use of mouthrinses containing chlorhexidine, triclosan and essential oils in ethanolic solution, compared to a placebo mouthwash. Study design: This double-blind, prospective, randomized clinical trial included 80 Caucasian patients. Subjects were divided into four groups: Group I used a mouthrinse, Triclosan; Group II used physiological saline; Group III used chlorhexidine; Group IV a mouthrinse with essential oils in ethanolic solution. All subjects used the mouthrinses for two weeks (15 ml, twice a day, rinsing for 30 s).more » Two cell samples per subject were collected, before and after mouthrinse use (on day 0 and day 15). Samples were processed as follows: cell collection from cheeks with a cytobrush; cell centrifuge; slide preparation, fixation and staining; and fluorescent microscope analysis. 2000 exfoliated cells were screened for nuclear abnormalities, particularly the presence of micronuclei by means of cytome assay. Results: No significant differences between study times (before and after use of mouthwash) were identified for any of the variables studied (p>0.05). Differences between mouthrinse groups were also compared but no significant differences were found (p>0.05). Conclusions: This study did not observe any genotoxic effect resulting from mouthrinse use. - Highlights: • Mouthrinses are used widely, mainly for their capacity to control dental plaque. • No genotoxic effects from the mouthrinses triclosan, chlorhexidine essential oils solution. • The buccal cytome assay is a sensitive, non-invasive, and low cost technique.« less
NASA Astrophysics Data System (ADS)
Kautz, M.
2016-12-01
Microplastic research in aquatic environments has quickly evolved over the last decade. To have meaningful inter-study comparisons, it is necessary to define methodological criteria for both the sampling and sorting of microplastics. The most common sampling method used for sea surface samples has traditionally been a neuston net (NN) tow. Originally designed for plankton collection, neuston tows allow for a large volume of water to be sampled and can be coupled with phytoplankton monitoring. The widespread use of surface nets allows for easy comparison between data sets, but the units of measurement for calculating microplastic concentration vary, from surface area m2 and Km2, to volume of water sampled, m3. Contamination by the air, equipment, or sampler is a constant concern in microplastic research. Significant in-field contamination concerns for neuston tow sampling include air exposure time, microplastics in rinse water, sampler contact, and plastic net material. Seeking to overcome the lack of contamination control and the intrinsic instrumental size limitation associated with surface tow nets, we developed an alternative sampling method. The whole water (WW) method is a one-liter grab sample of surface water adapted from College of the Atlantic and Sea Education Association (SEA) student, Marina Garland. This is the only WW method that we are aware of being used to sample microplastic. The method addresses the increasing need to explore smaller size domains, to reduce potential contamination and to incorporate citizen scientists into data collection. Less water is analyzed using the WW method, but it allows for targeted sampling of point-source pollution, intertidal, and shallow areas. The WW methodology can easily be integrated into long-term or citizen science monitoring initiatives due to its simplicity and low equipment demands. The aim of our study was to demonstrate a practical and economically feasible method for sampling microplastic abundance at the micro (10-6m) and nano (10-8m) scale that can be used in a wide variety of environments, and for assessing spatial and temporal distributions. The method has been employed in a multi-year citizen science collaboration with Adventurers and Scientists for Conservation to study microplastic worldwide.
Genotypic characterization and biofilm formation of Shiga toxin-producing Escherichia coli.
Picozzi, Claudia; Antoniani, Davide; Vigentini, Ileana; Foschino, Roberto; Kneifel, Wolfgang
2017-01-01
Shiga toxin-producing Escherichia coli (STEC) are recognized as one of the most dangerous foodborne pathogens. The production of Shiga toxins together with intimin protein is among the main virulence factors. However, the ability to form biofilm can protect bacteria against environmental factors (i.e. desiccation, exposure to UV rays, predation, etc.) and sanitization procedures (cleaning, rinsing, chlorination), increasing their survival on food products and in manufacturing plants. Forty-five isolates collected from food and fecal samples were genotyped by pulsed field gel electrophoresis analysis with XbaI restriction enzyme and investigated by searching for toxins (stx1, stx2) and intimin (eae) genes and serogroup (O157, O26, O145, O111, O103 and O104). Afterward, the ability to develop biofilm in microtiter assay and the production of adhesive curli fimbriae and cellulose on agar plates were tested. Our study demonstrated that biofilm formation has a great variability among STEC strains and cannot be related to a specific pulsotype nor even to serogroup or presence of virulence genes. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Amin, Nuhu; Pickering, Amy J.; Ram, Pavani K.; Unicomb, Leanne; Najnin, Nusrat; Homaira, Nusrat; Ashraf, Sania; Abedin, Jaynal; Islam, M. Sirajul; Luby, Stephen P.
2014-01-01
We conducted a randomized, non-inferiority field trial in urban Dhaka, Bangladesh among mothers to compare microbial efficacy of soapy water (30 g powdered detergent in 1.5 L water) with bar soap and water alone. Fieldworkers collected hand rinse samples before and after the following washing regimens: scrubbing with soapy water for 15 and 30 seconds; scrubbing with bar soap for 15 and 30 seconds; and scrubbing with water alone for 15 seconds. Soapy water and bar soap removed thermotolerant coliforms similarly after washing for 15 seconds (mean log10 reduction = 0.7 colony-forming units [CFU], P < 0.001 for soapy water; mean log10 reduction = 0.6 CFU, P = 0.001 for bar soap). Increasing scrubbing time to 30 seconds did not improve removal (P > 0.05). Scrubbing hands with water alone also reduced thermotolerant coliforms (mean log10 reduction = 0.3 CFU, P = 0.046) but was less efficacious than scrubbing hands with soapy water. Soapy water is an inexpensive and microbiologically effective cleansing agent to improve handwashing among households with vulnerable children. PMID:24914003
Rechmann, Peter; Bartolome, N; Kinsel, R; Vaderhobli, R; Rechmann, B M T
2017-12-01
The objective of this study was to evaluate the influence of CO 2 9.3 μm short-pulsed laser irradiation on the shear bond strength of composite resin to enamel and dentin. Two hundred enamel and 210 dentin samples were irradiated with a 9.3 µm carbon dioxide laser (Solea, Convergent Dental, Inc., Natick, MA) with energies which either enhanced caries resistance or were effective for ablation. OptiBond Solo Plus [OptiBondTE] (Kerr Corporation, Orange, CA) and Peak Universal Bond light-cured adhesive [PeakTE] (Ultradent Products, South Jordan, UT) were used. In addition, Scotchbond Universal [ScotchbondSE] (3M ESPE, St. Paul, MN) and Peak SE self-etching primer with Peak Universal Bond light-cured adhesive [PeakSE] (Ultradent Products) were tested. Clearfil APX (Kuraray, New York, NY) was bonded to the samples. After 24 h, a single plane shear bond test was performed. Using the caries preventive setting on enamel resulted in increased shear bond strength for all bonding agents except for self-etch PeakSE. The highest overall bond strength was seen with PeakTE (41.29 ± 6.04 MPa). Etch-and-rinse systems achieved higher bond strength values to ablated enamel than the self-etch systems did. PeakTE showed the highest shear bond strength with 35.22 ± 4.40 MPa. OptiBondTE reached 93.8% of its control value. The self-etch system PeakSE presented significantly lower bond strength. The shear bond strength to dentin ranged between 19.15 ± 3.49 MPa for OptiBondTE and 43.94 ± 6.47 MPa for PeakSE. Etch-and-rinse systems had consistently higher bond strength to CO 2 9.3 µm laser-ablated enamel. Using the maximum recommended energy for dentin ablation, the self-etch system PeakSE reached the highest bond strength (43.9 ± 6.5 MPa).
Youn, S Y; Jeong, O M; Choi, B K; Jung, S C; Kang, M S
2017-02-01
Raw chicken products are major causes of human foodborne salmonellosis worldwide. In particular, there is a significant risk of human exposure to Salmonella originating from the chicken slaughtering process. Controlling the contamination of chicken carcasses by Salmonella has been a considerable challenge in chicken-slaughtering facilities and involves routine microbiological monitoring using reliable detection methods. Simple and rapid detection methods, particularly those capable of determining cell viability, will significantly facilitate routine monitoring of Salmonella Here, we report an invA-based loop-mediated isothermal amplification method coupled with a simple propidium monoazide treatment (PMA-LAMP) for simple and rapid detection and quantification of viable Salmonella in rinse water of chicken carcasses. In this study, PMA-LAMP consistently gave negative results for isopropanol-killed Salmonella with concentrations up to 8.0 × 10 6 CFU/reaction. The detection limit of PMA-LAMP was 8.0 × 10 1 CFU/reaction with viable Salmonella in both pure culture and rinse water of chicken carcasses, and 10-fold lower than a conventional polymerase chain reaction coupled with PMA (PMA-PCR) targeting invA There was a high correlation (R 2 = 0.99 to 0.976) between LAMP time threshold (T T ) values and viable Salmonella with a quantification range of 1.0 × 10 3 to 1.0 × 10 8 CFU/mL in pure culture and rinse water of chicken carcasses. The PMA-LAMP assay took less than 2 h to detect Salmonella contaminated in test samples. Therefore, this simple and rapid method will be a very useful tool to detect live Salmonella contamination of chicken carcasses without pre-enrichment at the slaughterhouse where sanitizing treatments are commonly used. © 2016 Poultry Science Association Inc.
Fernandez y Mostajo, Mercedes; van der Reijden, Wil A; Buijs, Mark J; Beertsen, Wouter; Van der Weijden, Fridus; Crielaard, Wim; Zaura, Egija
2014-01-01
Oral bacteria live in symbiosis with the host. Therefore, when mouthwashes are indicated, selective inhibition of taxa contributing to disease is preferred instead of broad-spectrum antimicrobials. The potential selectivity of an oxygenating mouthwash, Ardox-X® (AX), has not been assessed. The aim of this study was to determine the antimicrobial potential of AX and the effects of a twice-daily oral rinse on dental plaque composition. In vitro, 16 oral bacterial strains were tested using agar diffusion susceptibility, minimum inhibitory and minimum bactericidal concentration tests. A pilot clinical study was performed with 25 healthy volunteers. Clinical assessments and microbiological sampling of supragingival plaque were performed at 1 month before the experiment (Pre-exp), at the start of the experiment (Baseline) and after the one-week experimental period (Post-exp). During the experiment individuals used AX mouthwash twice daily in absence of other oral hygiene measures. The microbiological composition of plaque was assessed by 16S rRNA gene amplicon sequencing. AX showed high inter-species variation in microbial growth inhibition. The tested Prevotella strains and Fusobacterium nucleatum showed the highest sensitivity, while streptococci and Lactobacillus acidophilus were most resistant to AX. Plaque scores at Pre-exp and Baseline visits did not differ significantly (p = 0.193), nor did the microbial composition of plaque. During a period of 7-days non-brushing but twice daily rinsing plaque scores increased from 2.21 (0.31) at Baseline to 2.43 (0.39) Post-exp. A significant microbial shift in composition was observed: genus Streptococcus and Veillonella increased while Corynebacterium, Haemophilus, Leptotrichia, Cardiobacterium and Capnocytophaga decreased (p ≤ 0.001). AX has the potential for selective inhibition of oral bacteria. The shift in oral microbiome after 1 week of rinsing deserves further research.
Lotfi, Mehrdad; Moghaddam, Negar; Vosoughhosseini, Sepideh; Zand, Vahid; Saghiri, Mohammad Ali
2012-01-01
Background and aims The aim of the present study was to compare 1.3% sodium hypochlorite (NaOCl) in MTAD (mixture of tetracycline isomer, acid, and detergent) for the removal of the smear layer and induction of canal erosion. Materials and methods 38 maxillary incisors were divided in three experimental groups of 10 and two positive and negative control groups of each 4 teeth, and prepared using rotary files. In test groups, 1.3% NaOCl was used for 5, 10 and 20 minutes during preparation followed by MTAD as the final rinse. In negative control group, 5.25% NaOCl was used for 10 minutes followed by 17% Ethylenediamine Tetra-Acetic Acid (EDTA) as the final rinse. In positive control group, dis-tilled water was used for 10 minutes during preparation and then as the final rinse. The samples were examined under scan-ning electron microscope, and the smear layer and dentinal erosion scores were recorded. Results Five and 10 min groups had significant differences with 20 min group (p < 0.05). In apical third, 5 and 10 min groups had also significant differences with 20 min (p < 0.05). In the coronal thirds, when the time of irrigation with 1.3% NaOCl increased from 5 min to 20 min, erosion also increased significantly. However, 5 and 10 min groups had no signifi-cant differences with negative control group. Conclusion The use of 1.3% sodium hypochlorite for 5 and 10 minutes in the MTAD protocol removes the smear layer in the coronal and middle thirds but does not induce erosion. PMID:22991642
Researchers at USEPA are testing and evaluating two commercial electrochemical technologies for the purification of rinse water and the recovery of copper and nickel from a variety of electroplating processes. One of the investigated technologies is based on the application of hi...
Impact of alternative antimicrobial commercial egg washes on reducing Salmonella contamination
USDA-ARS?s Scientific Manuscript database
Introduction: Table eggs are washed with an alkaline detergent at approximately pH 11 and at a temperature at least 32°C, followed by a chlorine rinse. Both wash temperature and an antimicrobial rinse are required by regulation, but wash pH is not specified. At this pH, little, if any, free chlorine...
40 CFR 421.206 - Pretreatment standards for new sources.
Code of Federal Regulations, 2010 CFR
2010-07-01
... mercury produced from batteries Lead 0.030 0.014 Mercury 0.016 0.006 (b) Acid wash and rinse water. PSNS... for monthly average mg/kg (pounds per million pounds) of mercury washed and rinsed Lead 0.00056 0.00026 Mercury 0.00030 0.00012 (c) Furnance wet air pollution control. PSNS for the Secondary Mercury...
Investigation Into The Effectiveness of The JLAB High Pressure Rinse System
DOE Office of Scientific and Technical Information (OSTI.GOV)
John Mammosser; Timothy Rothgeb; Tong Wang
2003-05-01
As part of a study to reduce field emission in Superconducting radio frequency cavities, an investigation into the effectiveness of the Jefferson Lab's High Pressure Rinse (HPR) system is underway. This paper describes discoveries from this investigation, the procedural changes made during this investigation, current vertical test results and further plans for improvements and monitoring.
Fluoride rinse effect on retention of CaF2 formed on enamel/dentine by fluoride application.
Falcão, Amanda; Masson, Nadia; Leitão, Tarcísio Jorge; Botelho, Juliana Nunes; Ferreira-Nóbilo, Naiara de Paula; Tabchoury, Cínthia Pereira Machado; Tenuta, Livia Maria Andaló; Cury, Jaime Aparecido
2016-01-01
Calcium fluoride-like materials ("CaF2") formed on dental surfaces after professional fluoride application are unstable in the oral environment but can be retained longer with a daily NaF mouthrinse. We tested the effect of twice daily 0.05% NaF rinses on the retention of "CaF2" formed on enamel and dentine after applying acidulated phosphate fluoride (APF). "CaF2" formed on enamel/dentine by APF application significantly decreased after exposure to artificial saliva and the 0.05% NaF rinse was ineffective to avoid this reduction. These findings suggest that the combination of APF and 0.05% NaF is not clinically relevant, either for caries or dental hypersensitivity.
A Farm to Fork Risk Assessment for the Use of Wastewater in Agriculture in Accra, Ghana
Antwi-Agyei, Prince; Cairncross, Sandy; Peasey, Anne; Price, Vivien; Bruce, Jane; Baker, Kelly; Moe, Christine; Ampofo, Joseph; Armah, George; Ensink, Jeroen
2015-01-01
The need to minimise consumer risk, especially for food that can be consumed uncooked, is a continuing public health concern, particularly in places where safe sanitation and hygienic practices are absent. The use of wastewater in agriculture has been associated with disease risks, though its relative significance in disease transmission remains unclear. This study aimed at identifying key risk factors for produce contamination at different entry points of the food chain. Over 500 produce and ready-to-eat salad samples were collected from fields, markets, and kitchens during the dry and wet seasons in Accra, Ghana, and over 300 soil and irrigation water samples were collected. All samples were analysed for E. coli, human adenovirus and norovirus using standard microbiological procedures, and real time RT-PCR. Finally, critical exposures associated with microbial quality of produce were assessed through observations and interviews. The study found that over 80% of produce samples were contaminated with E. coli, with median concentrations ranging from 0.64 to 3.84 Log E. coli/g produce. Prepared salad from street food vendors was found to be the most contaminated (4.23 Log E. coli/g), and that consumption of salad exceeded acceptable health limits. Key risk factors identified for produce contamination were irrigation water and soil at the farm level. Storage duration and temperature of produce had a significant influence on the quality of produce sold at markets, while observations revealed that the washed water used to rinse produce before sale was dirty. The source of produce and operating with a hygiene permit were found to influence salad microbial quality at kitchens. This study argues for a need to manage produce risk factors at all domains along the food chain, though it would be more effective to prioritise at markets and kitchens due to cost, ease of implementation and public health significance. PMID:26556044
2012-12-01
4.5 Food-grade aluminum foil 4.6 Stainless steel forceps 4.7 Single-edge razor blades 4.8 Teflon (or similar non-contaminating material) cutting...handling PE to avoid cross-contaminating the PE. 6.3 Methylene chloride (pesticide grade) rinsed, stainless steel forceps and scissors are used...3.1 PE is susceptible to contamination from atmospheric and surfaces, and so it must be handled using clean techniques. 3.2 While the formation of
Filtration stability of living brush mattresses at navigable waterways
NASA Astrophysics Data System (ADS)
Sokopp, Manuel
2017-04-01
According to the guidelines of the Federal Waterways Engineering and Research Institute in Germany, waterway construction buildings, which include soil bioengineering structures, must be stable against soil displacements. Therefore, willow brush mattresses were tested for their filtration stability in a specially developed process which is based on the testing of geotextiles and armourstones used for navigable waterway constructions. In March 2016 willow brush mattresses made of white (Salix alba L.) or basket willows (Salix viminalis L.) were planted in 16 sample boxes, each with a cross-section area of 30x30 cm. For the tests on filtration stability, the upper 20 cm of the box were separated and placed upside down into a device in which the sample box could be flowed through from below. When a water column of 50 cm above the sample was reached, the water outlet was opened so the water flowed through the sample in the opposite direction, thus simulating drawdown. By the measurements of the pressure sensors above and below the sample, the coefficient of permeability k of the rooted soil during drawdown could be calculated. After this hydropeaking cycle, the soil material that was rinsed out through the willow branches was collected, weighed after drying until weight constancy, and compared with the dry mass of the retained soil material to calculate the share of the total mass. These filtration stability tests were carried out directly after planting the sample boxes, as well as one, three and six months afterwards, each test series with four reruns per willow species. Over time, the increasing root penetration resulted in a significant reduction in the permeability and in more retained soil material.
Darchuk, Emily M; Waite-Cusic, Joy; Meunier-Goddik, Lisbeth
2015-10-01
Consolidation of the US milk industry has led to use of tankers for up to 24 h in between thorough cleanings. As the heavy use of tankers has not been previously studied, the effect of this form of hauling on raw milk quality is unknown. This study focused on the effect of frequent tanker use during hauling on raw milk quality at a commercial facility. Standard tanker use (cleaned-in-place once per 24 h) served as our control and incremental cleaning treatments (water rinse after each load, water rinse after each load with a sanitizer treatment after 12 h, and 12 h of sanitizer treatment) were added to the study to understand if any effect could be mitigated by more frequent cleaning. Producer samples were collected from the farm before loading milk into the tanker as well as sampling the same milk directly out of the tanker truck before unloading at the manufacturer. The study was repeated at 2 different dairy manufacturing facilities, once during the summer and once during the winter. Milk quality was quantified through industry-relevant microbiological tests: individual bacteria count, thermophilic spore count, and preliminary incubation count. Within the study we defined a negative effect on milk quality as a statistically significant difference between the tanker and producer samples in any of the 3 microbial tests conducted between treatments. Results from the study showed no clear effect due to hauling in individual bacteria count, thermophilic spore count, or preliminary incubation counts. There was also no difference in milk quality between the 2 plants, suggesting that neither season nor location affected our results in the standard use variable. As we did not see a negative effect on milk quality in the standard use variable, the addition of cleaning treatments did not appear to provide any clear benefit. Tanker surface swabs and ATP swabs were also used to monitor tanker sanitation and the efficacy of cleaning treatments. Both surface and ATP swabs revealed differences between cleaning efficacy at the 2 facilities. Although the differences in efficacy did not influence tanker milk quality within our study, variability in sanitation may provide a source of contamination that could negatively affect raw milk quality in other areas. Based on this study, current hauling practices appear to be effective in mitigating any measurable effect on raw milk quality; however, further investigation is needed before making industry-wide recommendations. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Geerts, Sabine; Bolette, Amandine; Seidel, Laurence; Guéders, Audrey
2012-01-01
Our experiment evaluated the microleakage in resin composite restorations bonded to dental tissues with different adhesive systems. 40 class V cavities were prepared on the facial and lingual surfaces of each tooth with coronal margins in enamel and apical margins in cementum (root dentin). The teeth were restored with Z100 resin composite bonded with different adhesive systems: Scotchbond Multipurpose (SBMP), a 3-step Etch and Rinse adhesive, Adper Scotchbond 1 XT (SB1), a 2-step Etch and Rinse adhesive, AdheSE One (ADSE-1), a 1-step Self-Etch adhesive, and AdheSE (ADSE), a 2-step Self-Etch adhesive. Teeth were thermocycled and immersed in 50% silver nitrate solution. When both interfaces were considered, SBMP has exhibited significantly less microleakage than other adhesive systems (resp., for SB1, ADSE-1 and ADSE, P = 0.0007, P < 0.0001 and P < 0.0001). When enamel and dentin interfaces were evaluated separately, (1) for the Self-Etch adhesives, microleakage was found greater at enamel than at dentin interfaces (for ADSE, P = 0.024 and for ADSE-1, P < 0.0001); (2) for the Etch and Rinse adhesive systems, there was no significant difference between enamel and dentin interfaces; (3) SBMP was found significantly better than other adhesives both at enamel and dentin interfaces. In our experiment Etch and Rinse adhesives remain better than Self-Etch adhesives at enamel interface. In addition, there was no statistical difference between 1-step (ADSE-1) and 2-step (ADSE) Self-Etch adhesives. PMID:22675358
Efficacy of home washing methods in controlling surface microbial contamination on fresh produce.
Kilonzo-Nthenge, Agnes; Chen, Fur-Chi; Godwin, Sandria L
2006-02-01
Much effort has been focused on sanitation of fresh produce at the commercial level; however, few options are available to the consumer. The purpose of this study was to determine the efficacy of different cleaning methods in reducing bacterial contamination on fresh produce in a home setting. Lettuce, broccoli, apples, and tomatoes were inoculated with Listeria innocua and then subjected to combinations of the following cleaning procedures: (i) soak for 2 min in tap water, Veggie Wash solution, 5% vinegar solution, or 13% lemon solution and (ii) rinse under running tap water, rinse and rub under running tap water, brush under running tap water, or wipe with wet/dry paper towel. Presoaking in water before rinsing significantly reduced bacteria in apples, tomatoes, and lettuce, but not in broccoli. Wiping apples and tomatoes with wet or dry paper towel showed lower bacterial reductions compared with soaking and rinsing procedures. Blossom ends of apples were more contaminated than the surface after soaking and rinsing; similar results were observed between flower section and stem of broccoli. Reductions of L. innocua in both tomatoes and apples (2.01 to 2.89 log CFU/g) were more than in lettuce and broccoli (1.41 to 1.88 log CFU/g) when subjected to same washing procedures. Reductions of surface contamination of lettuce after soaking in lemon or vinegar solutions were not significantly different (P > 0.05) from lettuce soaking in cold tap water. Therefore, educators and extension workers might consider it appropriate to instruct consumers to rub or brush fresh produce under cold running tap water before consumption.
Efficacy of mouth rinses and toothpaste on tooth whitening.
Torres, C R G; Perote, L C C C; Gutierrez, N C; Pucci, C R; Borges, A B
2013-01-01
People increasingly desire tooth whitening. Considering the wide range of whitening products on the market, this study evaluated the efficacy of whitening toothpastes and mouth rinses compared with the 10% carbamide peroxide (CP) whitening gel. We obtained 120 cylindrical specimens from bovine teeth, which were darkened for 24 hours in a coffee solution. The color measurement was performed by a spectrophotometer using the CIE L*a*b* system, and specimens were divided into six groups according to the use of the following agents: group 1, conventional fluoridated toothpaste; group 2, Close Up White Now; group 3, Listerine Whitening; group 4, Colgate Plax Whitening; group 5, experimental mouth rinse with Plasdone; and group 6, 10% CP Whiteness Perfect. After the simulation of 12 weeks of treatment for groups 1 to 5 and 14 days of treatment for group 6, the specimens were subjected to a new color reading. Data were subjected to one-way analysis of variance (α=0.05), which showed significant differences among groups after 12 weeks for ΔE (p=0.001). Results of the Tukey test revealed that groups 3, 4, and 6 presented significantly higher color alteration than groups 1, 2, and 5. The whitening toothpaste Close Up White Now and the experimental mouth rinse with Plasdone showed similar color alteration as conventional toothpaste after a 12-week treatment simulation. These groups presented significantly lower color alteration compared with whitening mouth rinses Listerine and Colgate Plax Whitening, which showed similar results to those observed after 14 days of bleaching with 10% CP treatment.
Zingler, S; Pritsch, M; Lux, C J; Kneist, S
2016-09-01
To evaluate the correlation between clinical and salivary microbial parameters during treatment with removable orthodontic appliances with or without use of fluoride mouth rinse. A group of 48 patients completed this randomized, controlled, parallel-group, clinical pilot study. 24 patients of the test group (TG) rinsed after tooth brushing with a fluoride mouth rinse (100 ppm AmF/150 ppm NaF) while 21 patients of the control group (CG) did not. Clinical parameters [Approximal Plaque Index (API), Papillary Bleeding Index (PBI)] as well as levels of salivary mutans streptococci (MS) and lactobacilli (LB) were assessed at baseline and after 3, 6, 9 and 12 months. Compliance was documented by participants. Appliance wear-times were estimated retrospectively by the patients. All participants received the same brushing instructions and were supplied with the same toothbrush/toothpaste. A significant correlation of API values with MS levels (p=0.0003) or with LB levels (p=0.001) was observed. Furthermore, appliance wear-times were significantly associated with API values (p=0.02). The changes of MS or LB levels between beginning and end of the study did not differ significantly between study groups. The changes of the API scores showed slightly different median values (-3.5 in the TG vs. 0 in the CG), the difference, however, was not significant. The results emphasise the need for a careful monitoring of the oral hygiene status in patients with removable orthodontic appliances. Larger controlled clinical trials are necessary to investigate treatment options such as use of supplementary fluoride mouth rinse.
Chon, Jung-Whan; Kim, Hong-Seok; Kim, Hyunsook; Oh, Deog-Hwan; Seo, Kun-Ho
2014-05-01
Potassium-clavulanate-supplemented modified charcoal-cefoperazone-deoxycholate agar (C-mCCDA) that was described in our previous study was compared with original mCCDA for the enumeration of Campylobacter in pure culture and chicken carcass rinse. The quantitative detection of viable Campylobacter cells from a pure culture, plated on C-mCCDA, is statistically similar (P > 0.05) to mCCDA. In total, 120 chickens were rinsed using 400 mL buffered peptone water. The rinses were inoculated onto C-mCCDA and mCCDA followed by incubation at 42 °C for 48 h. There was no statistical difference between C-mCCDA (45 of 120 plates; mean count, 145.5 CFU/mL) and normal mCCDA (46 of 120 plates; mean count, 160.8 CFU/mL) in the isolation rate and recovery of Campylobacter (P > 0.05) from chicken carcass rinse. The Pearson correlation coefficient value for the number of Campylobacter cells recovered in the 2 media was 0.942. However, the selectivity was much better on C-mCCDA than on mCCDA plates (P < 0.05). Significantly fewer C-mCCDA plates (33 out of 120 plates; mean count, 1.9 CFU/mL) were contaminated with non-Campylobacter cells than the normal mCCDA plates (67 out of 120 plates; mean count, 27.1 CFU/mL). The C-mCCDA may provide improved results for enumeration of Campylobacter in chicken meat alternative to mCCDA with its increased selectivity the modified agar possess. © 2014 Institute of Food Technologists®
Heratizadeh, Annice; Killig, Claudia; Worm, Margitta; Soost, Stephanie; Simon, Dagmar; Bauer, Andrea; Mahler, Vera; Schuster, Christian; Szliska, Christiane; Frambach, Yvonne; Eben, Ricarda; Werfel, Thomas; Uter, Wolfgang; Schnuch, Axel
2010-06-01
While the use of methyldibromo glutaronitrile (MDBGN) in leave-on products is clearly associated with high sensitization or elicitation risk, such a clear-cut relation could be questioned with regard to rinse-off products. The objective of this study was to find a maximum non-eliciting concentration for rinse-off products in MDBGN patch test-positive patients. We performed a use-related test [repeated open application test (ROAT)] in patients sensitized to MDBGN with a liquid soap containing three concentrations of MDBGN (50, 200, and 400 p.p.m. MDBGN, respectively). The soap at 50 p.p.m. was used twice daily for 4 weeks. If no reaction of the skin was observed, the product with the next higher concentration was used for another 4 weeks, etc. In total, 32/37 evaluated cases [86.5%; lower exact one-sided 95% confidence limit (CL): 73.7%] did not react to any of the preparations. The remaining reacted as follows: 1/37 reacted to 50 p.p.m., 3/37 to 200 p.p.m., and 1/37 to 400 p.p.m. The cumulative non-response to 50 p.p.m. was 97.3% (lower CL: 87.8%). The majority of subjects sensitized to MDBGN-tolerated rinse-off products containing a maximum concentration of 400 p.p.m. A concentration in rinse-off products in the range of 50 p.p.m. could be regarded as safe for most individuals already sensitized. These concentrations will presumably prevent induction (sensitization) also.
NAVAIR Progress in Assessing, Validating and Implementing Non-Chromate Primers (Briefing charts)
2011-02-09
logistics for any new coating or coating system NAVAIR Application Areas for Hexavalent Chromium Alternatives: Status Components/ Structure... Hexavalent chromium alternatives Sacrificial Coating Post Treatment MIL-A-8625 Anodize Avionics/ Electronics Magnesium/Titanium Conversion Aluminum Anodizing...Aluminum Pretreatment Type IC Seal Type IIB Seal Type II Seal Phosphating Rinse (Aluminum)Rinse (Steel) Cadmium Zinc-Nickel Aluminum Bonding Chrome
Field investigation of arsenic in ceramic pot filter-treated drinking water.
Archer, A R; Elmore, A C; Bell, E; Rozycki, C
2011-01-01
Ceramic pot filters (CPFs) is one of several household water treatment technologies that is used to treat drinking water in developing areas. The filters have the advantage of being able to be manufactured using primarily locally available materials and local labor. However, naturally-occurring arsenic present in the clay used to make the filters has the potential to contaminate the water in excess of the World Health Organization drinking water standard of 0.01 mg/L. A manufacturing facility in Guatemala routinely rinses filters to reduce arsenic concentrations prior to distribution to consumers. A systemic study was performed to evaluate the change in arsenic concentrations with increasing volumes of rinse water. Arsenic field kit results were compared to standard method laboratory results, and dissolved versus suspended arsenic concentrations in CPF-treated water were evaluated. The results of the study suggest that rinsing is an effective means of mitigating arsenic leached from the filters, and that even in the absence of a formal rinsing program, routine consumer use may result in the rapid decline of arsenic concentrations. More importantly, the results indicate that filter manufacturers should give strong consideration to implementing an arsenic testing program.
In vivo antiplaque efficacy of combined antimicrobial dentifrice and rinse hygiene regimens.
White, Donald J; Barker, Matthew L; Klukowska, Malgorzata
2008-06-01
To evaluate using digital plaque image analysis the antiplaque efficacy of oral care regimens including use of antimicrobial toothpaste in combination with antimicrobial mouthrinse. 16 subjects completed the study protocol including: (1) initial treatment phase, all subjects used a standard sodium fluoride dentifrice with 2x/day brushing, (2) second treatment phase, subjects were randomized to two treatment groups: stannous fluoride/sodium hexametaphosphate dentifrice or sodium fluoride triclosan/copolymer dentifrice; (3) third treatment phase, the group using stannous fluoride dentifrice rinsed with alcohol-free cetylpyridinium chloride mouthrinse and the group using triclosan dentifrice rinsed with essential oil mouthrinse. During each phase, plaque levels were assessed in the morning before toothbrushing (AM), post-brushing in the morning (PB) and in the afternoon (PM). Stannous fluoride dentifrice was superior to triclosan dentifrice in plaque growth inhibition between toothbrushing. Both mouthrinses provided additional plaque prevention benefits when used with antimicrobial dentifrices. The cetylpyridinium chloride mouthrinse and stannous fluoride dentifrice regimen was particularly effective, building accretive efficacy over time. Average plaque reductions exceeded 50% vs. sodium fluoride dentifrice alone. Chemotherapeutic dentifrices and rinses increase plaque control used alone and particularly in combination. The stannous fluoride-cetylpyridinium chloride regimen showed the greatest benefits.
Stability of self-assembled polymer films investigated by optical laser reflectometry.
Dejeu, Jérôme; Diziain, Séverine; Dange, Catherine; Membrey, François; Charraut, Daniel; Foissy, Alain
2008-04-01
We studied the influence of post-treatment rinsing after the formation of self-assembled polyelectrolyte films made with the weak base poly(allylamine hydrochloride) (PAH) and the strong acid poly(styrene sulfonate) (PSS). The stability of the film was studied using optical fixed-angle laser reflectometry to measure the release of polymeric material and AFM experiments to reveal the change of morphology and thickness. We found that the polymer films were stable upon rinsing when the pH was the same in the solution as that used in the buildup (pH 9). The films released most of the polymeric material when rinsed at higher pH values, but a layer remained that corresponded to a PAH monolayer directly bound with the silica surface. Films containing at least four bilayers were stable upon rinsing at lower pH values, but the stability of thinner films depended on the type of the last polymer deposited. They were stable in the case of PSS as an outermost deposit, but they released a large part of their material in the case of PAH. The stability results were determined using a simple model of the step-by-step assembly of the polymer film described formerly.
Fomete, B; Saheeb, B D; Obiadazie, A C
2015-06-01
Post operative care of sutured wound is important after surgery. Sutured wounds within the oral cavity are kept clean through frequent rinses with either normal saline, chlorhexidine mouth rinses, hydrogen peroxide diluted with saline, or fresh tap water. The patients were randomised into 3 groups (A, B and C). The container used had 34 chlorhexidine, 34 warm saline and 32 warm water mouth rinses. The latter served as control. All selected patients had scaling and polishing done preoperatively when needed. All participants in each group did not receive antibiotics but received analgesics (paracetamol 1 g 8 h for 5 days,). There were 49 females and 51 males, in the age range between 18 and 50 years. Microorganisms were found to grow on sutures with streptococcus viridians predominating followed by staphylococcus epidermides. The effects of chlorhexidine, warm saline and warm tap water mouth washes were not statistically significant. Chlorhexidine, warm salt water and warm tap water averagely produced the same number of colony forming units of bacteria, which shows that the three different mouth washes are equally effective as post-operative mouth rinses after oral surgery.
Merle, Harold; Donnio, Angélique; Ayeboua, Lucas; Michel, Franck; Thomas, Félix; Ketterle, Jeannine; Leonard, Christian; Josset, Patrice; Gerard, Max
2005-03-01
During the 4 years of this study, we noted 66 cases of alkali ocular burns, or approximately 16 cases per year, nearly half (45.5%) of which are due to an assault. For grade 1 and 2 burns the time elapsed to reepithelialization appears to be shorter when rinsed with Diphoterine* versus physiological solution. Comparison of the effectiveness of two rinsing solutions for emergency use: a physiological solution and an amphoteric solution (Diphoterine*, Laboratories Prevor, Valmondois, France). Description of the clinical and progressive characteristics of alkali burns treated at the University Hospital Center of Fort de France in Martinique (French West Indies). Prospective consecutive observational case series and nonrandomized comparative study. Sixty-six patients were included. The total number of burned eyes is 104. Forty-eight eyes (46%) were rinsed with physiological solution and 56 eyes (54%) with Diphoterine*. All patients benefited from an ocular rinse with 500ml of physiological solution or Diphoterine*, followed by a complete ophthalmologic exam. The ocular injuries were classified according to the Roper-Hall modification of the Hughes classification system. The same standardized therapeutic protocol was applied and adapted to the seriousness of the burn. Demographic data, time to corneal reepithelialization, final best corrected visual acuity and complications were analysed. Twenty-eight (42.4%) patients have a unilateral burn and 38 (57.6%) patients have bilateral burns. In decreasing order of frequency, the circumstances surrounding the injury are: assaults in 45.5% of cases (n=30), work-related accidents in 32% of cases (n=31), and domestic accidents in 23% of cases (n=15). For grade 1 and 2 burns the time elapsed to reepithelialization appears to be shorter when rinsed with Diphoterine* versus physiological solution (respectively): 1.9+/-1 days versus 11.1+/-1.4 days (p=10(-7)) and 5.6+/-4.9 days versus 10+/-9.2 days (p=0.02). For grade 3 and 4 burns, there are complications in 11 cases (11.6%): 8 corneal opacities and 3 perforations. This study is the first conducted in humans that takes into account the type of ocular rinse product used in the progressive follow-up study of injuries. The time elapsed to reepithelialization is shorter with Diphoterine* for grade 1 and 2 burns. There are not enough cases of grade 3 and 4 burns to make a conclusion. Diphoterine* seems very effective in terms of its mechanism of action and the experimental and clinical results.
Seo, K H; Mitchell, B W; Holt, P S; Gast, R K
2001-01-01
The bactericidal effect of high levels of negative ions was studied using a custom-built electrostatic space charge device. To investigate whether the ion-enriched air exerted a bactericidal effect, an aerosol containing Salmonella Enteritidis (SE) was pumped into a sealed plastic chamber. Plates of XLT4 agar were attached to the walls, top, and bottom of the chamber and exposed to the aerosol for 3 h with and without the ionizer treatment. The plates were then removed from the chamber, incubated at 37 degrees C for 24 h, and colonies were counted. An average of greater than 10(3) CFU/plate were observed on plates exposed to the aerosol without the ionizer treatment (control) compared with an average of less than 53 CFU/plate on the ionizer-treated plates. In another series of experiments, the SE aerosol was pumped for 3 h into an empty chamber containing only the ionizer and allowed to collect on the internal surfaces. The inside surfaces of the chamber were then rinsed with 100 ml phosphate-buffered saline that was then plated onto XLT4 plates. While the rinse from the control chamber contained colony counts greater than 400 CFU/ml of wash, no colonies were found in the rinse from the ionizer-treatment chamber. These results indicate that high levels of negative air ions can have a significant impact on the airborne microbial load, and that most of this effect is through direct killing of the organisms. This technology, which also causes significant reduction in airborne dust, has already been successfully applied for poultry hatching cabinets and caged layer rooms. Other potential applications include any enclosed space such as food processing areas, medical institutions, the workplace, and the home, where reduction of airborne and surface pathogens is desired.
Foglio-Bonda, P L; Poggia, F; Foglio-Bonda, A; Mantovani, C; Pattarino, F; Giglietta, A
2015-01-01
To evaluate breath alcohol value and blood alcohol concentration after using mouthwashes containing ethanol in a panel of healthy young adults. To determine zeroing time of these values and if subjects' body mass index or gender influenced it. Breathalyzer test is a practice performed to detect alcohol-impaired-drivers that can be penalized. Sometimes Italian judges revoke the penalty justifying that the presence of residual ethanol in the oral cavity can cause false positive values. Our study involved 40 young adult volunteers; the cohort was composed of University students aged between 21 and 30 years. They underwent a medical examination to evaluate BMI. We selected four alcoholic mouthwashes available on the market with a different ethanol amount and an ethanol/ water (10/90) mixture as a reference. Breath alcohol concentration values were collected using a portable breathalyzer immediately after the rinse (T0), after 10 and 20 minutes (T10 and T20). We evaluated blood alcohol concentration 5 minutes after the rinse. All T10 values are lower than 0.5 g/L (Italian BAC driving limit). Differences between average values at T0-T10 are statistically significant (p < 0.05). Correlations between BAV and BMI are not statistically significant respectively at T0 (A: p = 0.54. B: p = 0.96. C: p = 0.93. D: p = 0.53) and T10 (A: p = 0.42. C: p = 0.99. D: p = 0.66). Differences between male and female groups aren't statistically significant (A: p = 0.49; B: p = 0.79; C: p = 0.97; D: p = 0.06). High BAV values determined at T-0 are a consequence of residual ethanol present in the oral cavity, the zeroing time of these ones (oppure thereof) is very swift. Our study shows that rinsing with an alcoholic mouthwash before undergoing the breathalyzer test does not realistically influence the result.
Sattar, Syed A; Kibbee, Richard J; Tetro, Jason A; Rook, Tony A
2006-11-01
To evaluate the effectiveness of a high-level disinfection solution generated inside an endoscope processing system for decontaminating external and internal surfaces of experimentally contaminated heat-sensitive medical devices. The American Society for Testing and Materials Simulated-Use Test protocol (E1837-02), which incorporates a soil load in each inoculum, was used to evaluate the efficacy of the system when processing 4 common types of endoscopes contaminated separately with 5 types of nosocomial pathogens: Pseudomonas aeruginosa (ATCC 15442), spores of Clostridium difficile (ATCC 9689), a glutaraldehyde-resistant strain of Mycobacterium chelonae, a vancomycin-resistant strain of Enterococcus faecalis, and a methicillin-resistant strain of Staphylococcus aureus. Rinse solution samples from channels and from surfaces of the processed endoscopes were tested for any microbicidal residues. For all organisms tested, the baseline level of contamination of the endoscopes ranged from 5 log(10) to greater than 7 log(10) at each external surface site and internal channel. All tests showed reductions in viability of the test organisms to undetectable levels. All rinse solution samples from external and internal sites of the endoscopes proved to be free of any residual microbicidal activity. The endoscope reprocessor, with its processor-generated high-level disinfection solution, successfully reduced the numbers of selected, clinically relevant pathogens to undetectable levels both in the channels and on the outside surfaces of the 4 representative endoscopes tested in this study.
Atara, Achyuta G.; Manjusha, R.; Shukla, Vinay J.; Vaghela, Dharmendra B.; Rooparalia, Brijesh
2014-01-01
Background: Dental caries is the most common complaint encountered in clinical practice. Virtually every adult in the world has experience of dental caries. It affects almost 80% of the population. It is now being viewed in dual perspective- “caries as a disease” and “caries as a lesion”. Aims: To evaluate the efficacy of Triphaladi Gandusha for its anti-caries activity and improvement in Oral Hygiene Index in high risk patients of dental caries and to compare the efficacy of prevalent method of mouth rinsing and classical method of Gandusha. Materials and Methods: The study was conducted in 40 patients, 20 in each Group-1 and 2. Group -1 was given prepared Triphaladi mouthwash (mouth rinse) while Group-2 was given Triphaladi Kwath for Gandusha (retention). Results: The effect of treatment was assessed by subjective and objective parameters (like salivary pH, buffering capacity and microbial count). Triphaladi Gandusha (retention) in Group - 2 provided better results in the improvement of Ruja (toothache), Dantaharsha (tooth sensitivity), Sarambha (inflammation), pH of saliva, microbial count in salivary sample. And Triphaladi Mouthwash in Group - 1 provided better results in Srava (discharge), bad breath, pH of saliva and buffering capacity of salivary sample. There was no improvement in Chidrata (cavity formation), Krishnata (discoloration) and Chaladanta (mobility) with Triphaladi Gandusha and mouthwash. Conclusion: Study concluded that although both groups were effective, but Gandusha group patients’ got better relief in subjective symptoms compared to mouthwash group. PMID:25364198
Atara, Achyuta G; Manjusha, R; Shukla, Vinay J; Vaghela, Dharmendra B; Rooparalia, Brijesh
2014-01-01
Dental caries is the most common complaint encountered in clinical practice. Virtually every adult in the world has experience of dental caries. It affects almost 80% of the population. It is now being viewed in dual perspective- "caries as a disease" and "caries as a lesion". To evaluate the efficacy of Triphaladi Gandusha for its anti-caries activity and improvement in Oral Hygiene Index in high risk patients of dental caries and to compare the efficacy of prevalent method of mouth rinsing and classical method of Gandusha. The study was conducted in 40 patients, 20 in each Group-1 and 2. Group -1 was given prepared Triphaladi mouthwash (mouth rinse) while Group-2 was given Triphaladi Kwath for Gandusha (retention). The effect of treatment was assessed by subjective and objective parameters (like salivary pH, buffering capacity and microbial count). Triphaladi Gandusha (retention) in Group - 2 provided better results in the improvement of Ruja (toothache), Dantaharsha (tooth sensitivity), Sarambha (inflammation), pH of saliva, microbial count in salivary sample. And Triphaladi Mouthwash in Group - 1 provided better results in Srava (discharge), bad breath, pH of saliva and buffering capacity of salivary sample. There was no improvement in Chidrata (cavity formation), Krishnata (discoloration) and Chaladanta (mobility) with Triphaladi Gandusha and mouthwash. Study concluded that although both groups were effective, but Gandusha group patients' got better relief in subjective symptoms compared to mouthwash group.
Closed-Loop Treatment of Electrolytic and Electroless Nickel Rinse Water by Point-Of-Use Ion Exchange: A Case Study.
Dave Szlag1, Joe Leonhardt2, Albert Foster1, Mike Goss1 and Paul Bolger1.
1 U.S. EPA, National Risk Management Research Laboratory, 26 W. M. L. King D...
Methods for globally treating silica optics to reduce optical damage
Miller, Philip Edward; Suratwala, Tayyab Ishaq; Bude, Jeffrey Devin; Shen, Nan; Steele, William Augustus; Laurence, Ted Alfred; Feit, Michael Dennis; Wong, Lana Louie
2012-11-20
A method for preventing damage caused by high intensity light sources to optical components includes annealing the optical component for a predetermined period. Another method includes etching the optical component in an etchant including fluoride and bi-fluoride ions. The method also includes ultrasonically agitating the etching solution during the process followed by rinsing of the optical component in a rinse bath.
40 CFR 421.336 - Pretreatment standards for new sources.
Code of Federal Regulations, 2013 CFR
2013-07-01
....000 499.500 (d) SiCl4 purification wet air pollution control. PSNS for the Primary Zirconium and....262 Lead 4.416 2.050 Nickel 8.674 5.835 Ammonia (as N) 2,102.000 895.800 (q) Leaching rinse water from... Nickel 32.410 21.810 Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy...
40 CFR 421.336 - Pretreatment standards for new sources.
Code of Federal Regulations, 2011 CFR
2011-07-01
....000 499.500 (d) SiCl4 purification wet air pollution control. PSNS for the Primary Zirconium and....262 Lead 4.416 2.050 Nickel 8.674 5.835 Ammonia (as N) 2,102.000 895.800 (q) Leaching rinse water from... Nickel 32.410 21.810 Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy...
40 CFR 421.336 - Pretreatment standards for new sources.
Code of Federal Regulations, 2010 CFR
2010-07-01
....000 499.500 (d) SiCl4 purification wet air pollution control. PSNS for the Primary Zirconium and....262 Lead 4.416 2.050 Nickel 8.674 5.835 Ammonia (as N) 2,102.000 895.800 (q) Leaching rinse water from... Nickel 32.410 21.810 Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy...
40 CFR 421.336 - Pretreatment standards for new sources.
Code of Federal Regulations, 2014 CFR
2014-07-01
....000 499.500 (d) SiCl4 purification wet air pollution control. PSNS for the Primary Zirconium and....262 Lead 4.416 2.050 Nickel 8.674 5.835 Ammonia (as N) 2,102.000 895.800 (q) Leaching rinse water from... Nickel 32.410 21.810 Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy...
40 CFR 421.336 - Pretreatment standards for new sources.
Code of Federal Regulations, 2012 CFR
2012-07-01
....000 499.500 (d) SiCl4 purification wet air pollution control. PSNS for the Primary Zirconium and....262 Lead 4.416 2.050 Nickel 8.674 5.835 Ammonia (as N) 2,102.000 895.800 (q) Leaching rinse water from... Nickel 32.410 21.810 Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy...
1985-09-01
Amonium Nitrate 301 Alkaline rust 104 Cold rinse remover 105...LABORATORY IAFESC/RDVW I IDTIC SLECTE DECO 3 WE SEPTEMBER 1985 D FINAL REPORT JANUARY 1985 -JUNE 1985 J APPROVED FOR PUBLIC RELEASE: DISTRIBUTION UNLIMITED...VIRGINIA 22314 .4" -5 . • " - ’ -. "." . . ."" L. . " -’ ’- ", "" -" " ". . . * V . . .," S " , ." ,. a V ’ *" " UNCLASSIFIEDA D ScURITY
Bowersock, T L; Wu, C C; Inskeep, G A; Chester, S T
2000-03-01
Dogs with periodontitis were used to determine the efficacy of an oral regimen of clindamycin versus chlorhexidine acetate oral rinse in reducing the total number of bacteria and the incidence of bacteremia before and after dental scaling. Aerobic and anaerobic bacteria, isolated from blood and gingival swab cultures, were identified to genus using an automated system.
USDA-ARS?s Scientific Manuscript database
The study was conducted to evaluate the effects of post-treatment rinsing with water on the inactivation efficacy of acid treatments against Salmonella inoculated onto stem scar areas of two types of tomatoes. In addition, impact on fruit quality was investigated during 21 days post-treatment storag...
Berry, A M
2013-10-01
Effective oral hygiene has been proposed as a key factor in the reduction of dental plaque colonisation and subsequent development of ventilator associated pneumonia (VAP). Listerine(®) oral rinse, while used extensively in dental practice has rarely been tested in mechanically ventilated patients. Sodium bicarbonate as an oral rinse has been more commonly utilised in oral hygiene regimens in intensive care patients. To test the efficacies of the essential oil mouth rinse, Listerine(®) (Pfizer) and sodium bicarbonate in the reduction of dental plaque colonisation with respiratory pathogens and the subsequent development of VAP. The study design was a prospective, single blind randomised comparative study of adult patients mechanically ventilated for at least 4 days. Patients were randomised to Listerine(®) (Pfizer) oral rinse twice daily, sodium bicarbonate oral rinse 2/24 or sterile water 2/24 (control group). All groups received tooth brushing 3 times a day. Dental plaque colonisation (primary outcome) and incidence of ventilator associated pneumonia (secondary outcome) were studied. Three hundred and ninety-eight patients were randomised to either the Listerine group (127), sodium bicarbonate group (133) or the control group (138). Baseline characteristics were similar for all groups. There were no significant differences between the control and study groups in colonisation of dental plaque at Day 4 (p=0.243). Ventilator associated pneumonia was diagnosed in 18 patients. The incidence was, Listerine(®) group 4.7%, sodium bicarbonate group 4.5% and control 4.3% [OR, 0.99; 95% CI, 0.31 to 3.16; p=0.92]. Compared to the control group, Listerine(®) or sodium bicarbonate oral rinses were not more effective in the reduction of colonisation of dental plaque or the incidence of VAP. Given the low incidence of VAP, the common factor of a small, soft toothbrush as part of an oral hygiene regimen suggests possible benefit in mechanically ventilated patients. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.
Tess, D A; Cole, R O; Toler, S M
1995-12-15
A simple and highly sensitive reversed-phase fluorimetric HPLC method for the quantitation of droloxifene from rat, monkey, and human plasma as well as human serum is described. This assay employs solid-phase extraction and has a dynamic range of 25 to 10,000 pg/ml. Sample extraction (efficiencies > 86%) was accomplished using a benzenesulfonic acid (SCX) column with water and methanol rinses. Droloxifene and internal standard were eluted with 1 ml of 3.5% (v/v) ammonium hydroxide (30%) in methanol. Samples were quantitated using post-column UV-photochemical cyclization coupled with fluorimetric detection with excitation and emission wavelengths of 260 nm and 375 nm, respectively. Relative ease of sample extraction and short run times allow for the analysis of approximately 100 samples per day.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Palczewski, Ari D.; Tian, Hui; Trofimova, Olga
2011-07-01
We performed Centrifugal Barrel Polishing (CBP) on single crystal niobium samples/coupons housed in a stainless steel sample holder following the polishing recipe developed at Fermi Lab (FNAL) in 2011 \\cite{C. A. Cooper 2011}. Post CBP, the sample coupons were analyzed for surface roughness, crystal composition and structure, and particle contamination. Following the initial analysis each coupon was high pressure rinsed (HRP) and analyzed for the effectiveness of contamination removal. We were able to obtain the mirror like surface finish after the final stage of tumbling, although some defects and embedded particles remained. In addition, standard HPR appears to have littlemore » effect on removing embedded particles which remain after each tumbling step, although final polishing media removal was partially affected by standard/extended HPR.« less
Chon, Jung-Whan; Kim, Young-Ji; Kim, Hong-Seok; Kim, Dong-Hyeon; Kim, Hyunsook; Song, Kwang-Young; Sung, Kidon; Seo, Kun-Ho
2016-04-16
Although cefoperazone is the most commonly used antibiotic in Campylobacter-selective media, the distribution of cefoperazone-resistant bacteria such as extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli is increasing. Here we evaluated the potential of cephamycins for use as supplements to improve modified charcoal-cefoperazone-deoxycholate agar (mCCDA) by replacing cefoperazone with the same concentrations (32 mg/L) of cefotetan (modified charcoal-cefotetan-deoxycholate agar, mCCtDA) and cefoxitin (modified charcoal-cefoxitin-deoxycholate agar, mCCxDA). In chicken carcass rinse samples, the number of mCCDA plates detecting for Campylobacter (18/70, 26%) was significantly lower than that of mCCtDA (42/70, 60%) or mCCxDA plates (40/70, 57%). The number of mCCDA plates (70/70, 100%) that were contaminated with non-Campylobacter species was significantly higher than that of mCCtDA (20/70, 29%) or mCCxDA plates (21/70, 30%). The most common competing species identified using mCCDA was ESBL-producing E. coli, while Pseudomonas species frequently appeared on mCCtDA and mCCxDA. Copyright © 2016. Published by Elsevier B.V.
Physical Properties of Polyester Fabrics Treated with Nano, Micro and Macro Emulsion Silicones
NASA Astrophysics Data System (ADS)
Parvinzadeh, M.; Hajiraissi, R.
2007-08-01
The processing of textile to achieve a particular handle is one of the most important aspects of finishing technology. Fabrics softeners are liquid composition added to washing machines during the rinse cycle to make clothes feel better to the touch. The first fabric softeners were developed by the textile industry during the early twentieth century. In this research polyester fabrics were treated with nano, micro and macro emulsion silicone softeners. Some of the physical properties of the treated fabric samples are discussed. The drapeability of treated samples was improved after treatment with nano silicone softeners. The colorimetric measurement of softener-treated fabrics is evaluated with a reflectance spectrophotometer. Moisture regain of treated samples is increased due to coating of silicone softeners. There is some increase in the weight of softener-treated samples. Samples treated with nano emulsion silicones gave better results compared to micro- and macro-emulsion treated ones.
Effect of gaseous ozone on Enterococcus faecalis biofilm-an in vitro study.
Boch, Tanja; Tennert, Christian; Vach, Kirstin; Al-Ahmad, Ali; Hellwig, Elmar; Polydorou, Olga
2016-09-01
The aim of this study was to evaluate the antimicrobial effect of gaseous ozone compared to conventional methods against Enterococcus faecalis. One hundred twenty-five teeth were infected by E. faecalis and were incubated for 72 h to form biofilm. Teeth were distributed among five groups. In the first group, ozone was used; in the second group, teeth were rinsed with 20 % ethylenediaminetetraacetic acid (EDTA); in the third group, with 3 % sodium hypochlorite (NaOCl). Group 4 combined 20 % EDTA with ozone. NaOCl and ozone were combined in group 5. After treatment, the samples with paper points were taken, followed by dentin samples taken with K-file, and cultured for 24 h. Then bacterial colonies were counted. All treatments reduced significantly (p < 0.05) the bacteria. Paper points' samples showed 85.38 % reduction after ozone. The highest reduction was observed in NaOCl group (99.98 %). EDTA reduced bacteria by 80.64 %. Combination of NaOCl and ozone eradicated 99.95 % of the bacteria. Combination of EDTA and ozone reduced E. faecalis up to 91.33 %. The dentin chips showed the following: the highest CFU counts were observed in EDTA group, followed by ozone and NaOCl group. The lowest CFU counts were found in NaOCl-ozone group and EDTA-ozone group. Ozone reduced E. faecalis, even organised in a biofilm, however, lower than NaOCl. No treatment reduced totally the bacteria. Used as an adjuvant, ozone can increase the efficacy of conventional rinsing like EDTA and presents an alternative treatment when NaOCl cannot be used e.g. in teeth with a wide-open apical foramen.
[Studies for analyzing restricted ingredients such as phenylbenzoimidazole sulfonic acid].
Tokunaga, Hiroshi; Mori, Kenichiro; Onuki, Nahomi; Nosaka, Tomio; Doi, Kayo; Sakaguchi, Hiroshi; Fujii, Makiko; Takano, Katuhiro; Hayashi, Masato; Yoshizawa, Kenichi; Shimamura, Kimio; Sato, Nobuo
2006-01-01
Phenylbenzoimidazol sulfonic acid (PBS) is a kind of sunscreens in cosmetics and is nominated as the restricted ingredients in cosmetics in Japanese Pharmaceutical Affairs Act. So the analytical method for PBS was investigated by HPLC. 1.0 g of the lotions with 1.0% PBS was exactly weighed, put into a 50-mL volumetric flask. Water was added to make exactly 50 mL and this mixture was used as the sample solution. On the other hand, 1.0 g of the creams with 1.0% PBS was exactly weighed, put into a beaker. After adding 1 mL of tetrahydrofuran and dissolving the cream, that mixture was transferred to a 50-mL volumetric flask. And then the beaker was rinsed with 1 mL of tetrahydrofuran and the rinsed solution was put together into the volumetric flask. After adding water to the volumetric flask to make exactly 50 mL, this mixture was used as the sample solution. If necessary, the mixture was filtrated with a membrane filter (0.45 microm). 5.0 mL of the sample solution was pipetted and put into a 200-mL volumetric flask. After adding water to make exactly 200 mL, 20 microL of this solution was analyzed by HPLC using the ODS column (CAPCELL PAK C18 column, 4.6 mm i.d. x 250 mm), the mixture of 40 mmol/L acetic buffer (pH 3.4) and acetonitrile (3:1) with 0.8 mmol/L dodecyltrimethyl ammonium bromide and the detection wavelength of 305 nm. The working curve from 0.5 to 20.0 microg/mL showed a linear line between the concentrations of PBS and the peak areas. There was no interference of peak of PBS from the lotion and cream.
Margueratt, Sean D; Lee, J Michael
2002-01-01
Mechanical loading contributes to the structural deterioration of bioprosthetic heart valves. The influence of stress state during fixation may play a substantial role in their failure, linking fatigue damage caused by buckling and tension and the enzymatic degradation of glutaraldehyde-crosslinked collagen. Bovine pericardia were obtained immediately postmortem and 100 mm x 15 mm samples were cut in the base-to-apex direction. Half the samples were subjected to a uniaxial tensile stress of 250 kPa and half remained unloaded during a crosslinking treatment in 0.5% glutaraldehyde. Tissue samples were rinsed and cut into 16 mm x 4 mm test strips. Half of these strips were exposed to cyclic compressive buckling and alternating tension at 30 Hz for 20 million cycles (approx. 7.5 days) using a custom-built multi-sample fatigue system. Fatigue-damaged and non-damaged samples were subsequently incubated at 37 C for 48 hrs in: (i) Type I bacterial collagenase (20 U/ml) buffered in 0.05 M Tris, 10 mM CaCl2 2H2O (pH 7.4) or (ii) 0.05 M Tris buffer (pH 7.4) only. In both cases, the samples were loaded sinusoidally between 40 and 80 g using a previously described microtensile culture system. Tissue removed from the bath was rinsed in 0.1 M EDTA solution and mounted in a servo-hydraulic mechanical testing system (MTS). Ultimate tensile strength (UTS), maximum tissue modulus, and fracture strain were determined. The percent collagen solubilized was assessed by a colourmetric hydroxyproline assay of the enzyme bath and tissue sample. All data were analyzed by analysis of variance (ANOVA). The results confirmed the synergy between fatigue damage and collagenase proteolysis in these materials; however, there were no significant differences in this effect between simple fixation and stress-fixation up to 20 million cycles. There were significant decreases in the mechanical properties and an increase in the amount of collagen solubilized with increased exposure to fatigue cycling.
Bidra, Avinash S; Tarrand, Jeffery J; Roberts, Dianna B; Rolston, Kenneth V; Chambers, Mark S
2011-04-01
A variety of oral topical agents have been used for prevention and management of radiotherapy-induced adverse effects. The antimicrobial nature of some of the commonly used agents is unknown. The purpose of this study was to evaluate antimicrobial efficacies of various oral topical agents on common microorganisms associated with radiated head and neck cancer patients. Seven commonly used topical oral agents-0.12% chlorhexidine with alcohol, 0.12% chlorhexidine without alcohol, baking soda-salt rinse, 0.4% stannous fluoride gel, 0.63% stannous fluoride rinse, calcium phosphate mouthrinse, and acemannan hydrogel (aloe vera) rinse-were evaluated in vitro for their antimicrobial efficacies against four common microorganisms. A combination of baking soda-salt rinse and 0.4% stannous fluoride gel was evaluated as the eighth agent. The microorganisms used were Staphylococcus aureus, group B Streptococcus, Escherichia coli, and Candida albicans. An ELISA reader was used to measure the turbidity of microbial culture wells and optical density (OD) values for each of the 960 wells recorded. Mean OD values were rank ordered based on their turbidity. One-way ANOVA with Tukey HSD post hoc analysis was used to study differences in OD values (P < .05). Mean OD values classified for topical agents from lowest to highest were chlorhexidine with alcohol, chlorhexidine without alcohol, baking soda- salt, calcium phosphate rinse, and the combination of baking soda-salt and stannous fluoride gel. Mean OD values classified for microorganisms from lowest to highest were Escherichia coli, Staphylococcus aureus, group B Streptococcus, and Candida albicans. A significant difference among the antimicrobial efficacies of topical agents was evident for each of four microorganisms (P < .05). There was also a significant difference among the antimicrobial efficacies of the same topical agent on the four microorganisms tested (P < .05).
The effect of zoledronate-containing primer on dentin bonding of a universal adhesive.
Zenobi, Walter; Feitosa, Victor Pinheiro; Moura, Maria Elisa Martins; D'arcangelo, Camillo; Rodrigues, Lidiany Karla de Azevedo; Sauro, Salvatore
2018-01-01
To evaluate the bonding ability and nanoleakage of a universal adhesive applied to dentin pre-treated using a zoledronate-containing primer (zol-primer) before and after mechanical load cycling. Flat dentin surfaces obtained from human molars were assigned to one of the following adhesion procedures (n=6): 1-Single Bond Universal (SBU) applied in etch-and-rinse mode; 2- SBU applied as etch-and-rinse after the application of zol-primer; 3- SBU applied in self-etch strategy; 4- SBU applied as self-etch after the use of zol-primer. Half of the specimens were processed for microtensile bond strength test after 24h, while the other half part was submitted to 200,000 mechanical cycles. Further specimens were silver-impregnated and assessed for interface nanoleakage by SEM. Data were analyzed with two-way ANOVA and Tukey's test (p<0.05). At 24h evaluation, the four groups presented similar bond strengths, whilst both groups bonded with etch-and-rinse technique showed significant bond strength reduction after mechanical load (p<0.05), with the highest drop in bond strength for the specimens pre-treated with the zol-primer. No negative effects were found for self-etch strategy (p>0.05) in microtensile test. Lower nanoleakage expression was observed for etch-and-rinse specimens treated with zol-primer. However, noteworthy reduction of adhesive layer thickness was observed when combining the zol-primer with the self-etch bonding approach. It can be concluded that zol-primer should not be used along with a universal adhesive in etch-and-rinse mode, but its application before self-etch application may provide less degradation of the resin-dentin interface. Copyright © 2017 Elsevier Ltd. All rights reserved.
Whole body cleaning agent containing N-acyltaurate
NASA Technical Reports Server (NTRS)
Lentsch, Steven E. (Inventor)
1992-01-01
The subject invention relates to a human cleansing agent particularly suitable for use in long duration spaceflight and to a method of bathing with the agent. The agent of the subject invention is in the form of a paste having a pH of 5.0 to 7.9 which comprises an acyltaurate, a skin conditioner, a hair conditioner, and a preservative. More specifically, it includes sodium N-coconut acid-N-methyl taurate, in combination with soybean lecithin, polyquaternium 16, and formalin. This particular combination satisfies the following objectives: (1) that it be usable with a minimum amount of water per shower (approximately 1 gallon); (2) that it be easily separated from the water for purposes of water reclamation; (3) that it be pH compatible with skin and hair; (4) that it rinse well in deionized water; (5) that it be mild to skin and eyes; (6) that it effectively clean both skin and hair; (7) that it be suitable for use in zero gravity; and (8) that it provide ease of combing of wet and dry hair. The method of the invention includes the steps of wetting the skin and hair with a small quantity of water, lathering the skin with the paste, rinsing the lather from the skin and hair with a small quantity of water to produce a rinse water containing the cleansing agent, defoaming the rinse water, and supplying the defoamed rinse water to a water reclamation unit for recycling the water. The novelty of the invention appears to lie in the particular formulation of the cleansing agent and its method of use which provide optimal results under the given constraints and objectives.
Bond strength of universal adhesives: A systematic review and meta-analysis.
Rosa, Wellington Luiz de Oliveira da; Piva, Evandro; Silva, Adriana Fernandes da
2015-07-01
A systematic review was conducted to determine whether the etch-and-rinse or self-etching mode is the best protocol for dentin and enamel adhesion by universal adhesives. This report followed the PRISMA Statement. A total of 10 articles were included in the meta-analysis. Two reviewers performed a literature search up to October 2014 in eight databases: PubMed, Web of Science, Scopus, BBO, SciELO, LILACS, IBECS and The Cochrane Library. In vitro studies evaluating the bond strength of universal adhesives to dentin and/or enamel by the etch-and-rinse and self-etch strategies were eligible to be selected. Statistical analyses were conducted using RevMan 5.1 (The Cochrane Collaboration, Copenhagen, Denmark). A global comparison was performed with random-effects models at a significance level of p<0.05. The analysis of dentin micro-tensile bond strength showed no statistically significant difference between the etch-and-rinse and self-etch strategies for mild universal adhesives (p≥0.05). However, for the ultra-mild All-Bond Universal adhesive, the etch-and-rinse strategy was significantly different than the self-etch mode in terms of dentin micro-tensile bond strength, as well as in the global analysis of enamel micro-tensile and micro-shear bond strength (p≤0.05). The enamel bond strength of universal adhesives is improved with prior phosphoric acid etching. However, this effect was not evident for dentin with the use of mild universal adhesives with the etch-and-rinse strategy. Selective enamel etching prior to the application of a mild universal adhesive is an advisable strategy for optimizing bonding. Copyright © 2015 Elsevier Ltd. All rights reserved.
Defying ageing: An expectation for dentine bonding with universal adhesives?
Zhang, Zheng-yi; Tian, Fu-cong; Niu, Li-na; Ochala, Kirsten; Chen, Chen; Fu, Bai-ping; Wang, Xiao-yan; Pashley, David H; Tay, Franklin R
2016-02-01
The present study evaluated the long-term dentine bonding effectiveness of five universal adhesives in etch-and-rinse or self-etch mode after 12 months of water-ageing. The adhesives evaluated included All-Bond Universal, Clearfil Universal Bond, Futurabond U Prime&Bond Elect and Scotchbond Universal. Microtensile bond strength and transmission electron microscopy of the resin-dentine interfaces created in human coronal dentine were examined after 24h or 12 months. Microtensile bond strength were significantly affected by bonding strategy (etch-and-rinse vs self-etch) and ageing (24h vs 12 months). All subgroups showed significantly decreased bond strength after ageing except for Prime&Bond Elect and Scotchbond Universal used in self-etch mode. All five adhesives employed in etch-and-rinse mode exhibited ultrastructural features characteristic of collagen degradation and resin hydrolysis. A previously-unobserved inside-out collagen degradation pattern was identified in hybrid layers created by 10-MDP containing adhesives (All-Bond Universal, Scotchbond Universal and Clearfil Universal Bond) in the etch-and-rinse mode, producing partially degraded collagen fibrils with intact periphery and a hollow core. In the self-etch mode, all adhesives except for Prime&Bond Elect exhibited degradation of the collagen fibrils along the thin hybrid layers. The three 10-MDP containing universal adhesives did not protect surface collagen fibrils from degradation when bonding was performed in the self-etch mode. Despite the adjunctive conclusion that bonds created by universal adhesives in the self-etch bonding mode are more resistant to decline in bond strength when compared with those bonds created using the etch-and-rinse mode, bonds created by universal adhesives are generally incapable of defying ageing. Copyright © 2015 Elsevier Ltd. All rights reserved.
2013-01-01
Background Pain following surgical removal of impacted molars has remained an important concern among practitioners. Various protocols have been proposed to reduce postoperative pain. However, each one has special side effects and limitations. As green tea possesses anti-inflammatory and antibacterial properties, the aim of the current study was to evaluate the effectiveness of green tea mouthwash in controlling postoperative pain. Materials and methods In a study with split-mouth and double blind design, 44 patients in need of bilateral removal of impacted third molars underwent randomized surgical extraction; following one surgery patients rinsed with a green tea mouthwash from the first to seventh postoperative day and after other extraction rinsed with placebo mouthwash in the same duration. Both patients and surgeon were blinded to the type of mouthwash. The predictor variable was type of mouthwash and primary outcome variable was postoperative pain measured by visual analogue scale (VAS) during first week after surgery. In addition, number of analgesics patients used after surgery recorded. To measure the effect of green tea mouthwash, repeated measures test with confidence interval of 95% was performed. Results Total of 43 patients with mean age of 24 years underwent total of 86 surgeries. VAS value had no statistically difference prior rinsing among groups (P-value > 0.05). However, the mean value of VAS following rinsing with green tea was statistically lower than placebo in postoperative days of 3–7 (P-value < 0.05). In addition, while rinsing with green tea, patients took significantly lower number of analgesics after surgery (P-value < 0.05). No side effects reported. Conclusion Green tea mouthwash could be an appropriate and safe choice to control postoperative pain after third molar surgery. PMID:23866761
Wang, Jing; Gao, Yan; Wang, Qing-shan; Zhang, Yan; Rong, Li; Wang, Jiu
2014-08-01
To evaluate the cleaning effect of the C-shaped canal treated by manual K file and ProTaper rotary endodontic file combined with ultrasonic cleaning, and find a better cleaning program for the C-shaped root canal. Fifty mandibular second molars were randomly divided into 5 groups: K file group, K file+ultrasonic rinsing group, ProTaper group, ProTaper+ultrasonic rinsing group and the control group. After initial shaping and cleaning, the mandibular second molars were soaked in formalin and stained. Under microscopy, the cleaning rate of necrotic tissue and cutting area were observed and analyzed. The data was processed with SPSS 17.0 software package. The cleaning rates of the treated groups were significantly higher than that of the control group (P<0.05); In each treatment group, the cleaning rate of the apex was significantly lower than that of the crown and central part (P<0.05); The cutting score of ProTaper+ultrasonic cleaning group was lower than that of the other treatment groups; The cutting score of the K file+ultrasonic rinsing group was significantly lower than that of the K file group (P<0.05); The cutting score and cleaning rate were negatively correlated (r=-0.712, P=0.000 ), the linear regression was the cleaning rate =98.325-4.325 × wall cutting score (R=0.454, P<0.05). In the process of shaping and cleaning of C-shaped canal, it is recommended that the ProTaper nickel-titanium rotary endodontic file should be chosen to clean the top of the taproot pipe and combined with ultrasonic rinsing to achieve better results.
Effect of eliminating the residual fluoride gel on titanium bracket corrosion.
Khoury, Elie S; Abboud, Maher; Bassil-Nassif, Nayla; Bouserhal, Joseph
2011-09-01
Fluoride ions, in long-term applications on titanium brackets, cause their corrosion. Fluoride gel used for caries prevention during orthodontic treatment has a very high concentration in fluoride ions, and therefore has the potential for causing bracket corrosion. The main aim of this study was to determine the effect of eliminating the residual fluoride gel, by rinsing it, on the corrosion of titanium brackets. The secondary aim was to evaluate the corrosion of titanium brackets in the presence of fluoride gel. One hundred titanium brackets were divided into five groups of 20 brackets each. Group 1 being the control group, the rest of the groups were immersed in fluoride gel: Group 2 for 4 minutes and kept for 30 minutes with the residual fluoride gel on; Group 3 for 4 minutes followed by immediate water rinsing; Group 4 for 12 minutes and kept for 90 minutes with the residual fluoride gel on and Group 5 for 12 minutes followed by immediate water rinsing. All groups were rinsed then dried, for 20 hours, using Silica gel in a desiccator maintained at 37°C before testing. Gravimetrical results and SEM analysis showed no significant difference between Groups 2, 3 and 5 compared to each other and to the control group. Only Group 4 showed significant weight loss and pitting corrosion in four of the 20 brackets. In sliding resistance, no significant difference was detected between any of the groups. Short time applications of fluoride gel do not affect sliding resistance of titanium brackets. No titanium corrosion was detected for one application of concentrated fluoride gel and some brackets showed pitting corrosion for three applications. The rinsing of residual fluoride gel eliminates completely the risk of bracket corrosion. Copyright © 2011 CEO. Published by Elsevier Masson SAS. All rights reserved.
40 CFR 421.334 - Standards of performance for new sources.
Code of Federal Regulations, 2013 CFR
2013-07-01
... range of 7.5 to 10.0 at all times. (d) SiC14 purification wet air pollution control. NSPS for the....600 189.300 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from...) 1 Within the range of 7.5 to 10.0 at all times. (r) Leaching rinse water from zirconium alloy...
Code of Federal Regulations, 2013 CFR
2013-07-01
... times. (d) SiCl4 purification wet air pollution control. BPT Limitations for the Primary Zirconium and....600 307.600 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from... Within the range of 7.5 to 10.0. (r) Leaching rinse water from zirconium alloy production. BPT...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 2.387 1.108 Nickel 4.688 3.154 Ammonia (as N) 1,136.000 499.500 (d) SiCl4 purification wet air....674 5.835 Ammonia (as N) 2,102.000 895.000 (q) Leaching rinse water from zirconium metal production... Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy production. BAT...
Code of Federal Regulations, 2011 CFR
2011-07-01
... times. (d) SiCl4 purification wet air pollution control. BPT Limitations for the Primary Zirconium and....600 307.600 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from... Within the range of 7.5 to 10.0. (r) Leaching rinse water from zirconium alloy production. BPT...
40 CFR 421.334 - Standards of performance for new sources.
Code of Federal Regulations, 2012 CFR
2012-07-01
... range of 7.5 to 10.0 at all times. (d) SiC14 purification wet air pollution control. NSPS for the....600 189.300 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from...) 1 Within the range of 7.5 to 10.0 at all times. (r) Leaching rinse water from zirconium alloy...
40 CFR 421.334 - Standards of performance for new sources.
Code of Federal Regulations, 2014 CFR
2014-07-01
... range of 7.5 to 10.0 at all times. (d) SiC14 purification wet air pollution control. NSPS for the....600 189.300 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from...) 1 Within the range of 7.5 to 10.0 at all times. (r) Leaching rinse water from zirconium alloy...
Code of Federal Regulations, 2012 CFR
2012-07-01
... times. (d) SiCl4 purification wet air pollution control. BPT Limitations for the Primary Zirconium and....600 307.600 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from... Within the range of 7.5 to 10.0. (r) Leaching rinse water from zirconium alloy production. BPT...
Code of Federal Regulations, 2014 CFR
2014-07-01
... times. (d) SiCl4 purification wet air pollution control. BPT Limitations for the Primary Zirconium and....600 307.600 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from... Within the range of 7.5 to 10.0. (r) Leaching rinse water from zirconium alloy production. BPT...
Code of Federal Regulations, 2010 CFR
2010-07-01
... times. (d) SiCl4 purification wet air pollution control. BPT Limitations for the Primary Zirconium and....600 307.600 pH (1) (1) 1 Within the range of 7.5 to 10.0 at all times. (q) Leaching rinse water from... Within the range of 7.5 to 10.0. (r) Leaching rinse water from zirconium alloy production. BPT...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 2.387 1.108 Nickel 4.688 3.154 Ammonia (as N) 1,136.000 499.500 (d) SiCl4 purification wet air....674 5.835 Ammonia (as N) 2,102.000 895.000 (q) Leaching rinse water from zirconium metal production... Ammonia (as N) 7,856.000 3,453.000 (r) Leaching rinse water from zirconium alloy production. BAT...
Recycling positive-electrode material of a lithium-ion battery
Sloop, Steven E.
2017-11-21
Examples are disclosed of methods to recycle positive-electrode material of a lithium-ion battery. In one example, the positive-electrode material is heated under pressure in a concentrated lithium hydroxide solution. After heating, the positive-electrode material is separated from the concentrated lithium hydroxide solution. After separating, the positive electrode material is rinsed in a basic liquid. After rinsing, the positive-electrode material is dried and sintered.
Salivary contamination during bonding procedures with a one-bottle adhesive system.
Fritz, U B; Finger, W J; Stean, H
1998-09-01
The effect of salivary contamination of enamel and dentin on bonding efficacy of an experimental one-bottle resin adhesive was investigated. The adhesive was a light-curing urethane dimethacrylate/hydroxyethyl methacrylate/4-methacryloxyethyl trimellitate anhydride mixture dissolved in acetone. Evaluation parameters were shear bond strength and marginal gap width in a dental cavity. Apart from a control group without contamination (group 1), etched enamel and dentin were (2) contaminated with saliva and air dried; (3) contaminated, rinsed, and blot dried; (4) coated with adhesive, contaminated, rinsed, and blot dried; (5) coated with adhesive, light cured, contaminated, rinsed, and air dried; or (6) treated as in group 5, with additional adhesive application after air drying. There was no negative effect in groups 3 and 4, compared with control. Air drying after salivary contamination (group 2) resulted in low shear bond strengths and wide marginal gaps. Contamination of the cured adhesive layer (groups 5 and 6) had no adverse effect on enamel shear bond strengths, but resulted in 50% reduced dentin shear bond strengths and wide marginal gaps. The one-bottle adhesive system is relatively insensitive to salivary contamination, provided that the contamination occurs prior to light curing of the adhesive and is carefully rinsed and blot dried. Salivary contact after adhesive curing must be avoided.
Wave-front propagation of rinsing flows on rotating semiconductor wafers
NASA Astrophysics Data System (ADS)
Frostad, John M.; Ylitalo, Andy; Walls, Daniel J.; Mui, David S. L.; Fuller, Gerald G.
2016-11-01
The semiconductor manufacturing industry is migrating to a cleaning technology that involves dispersing cleaning solutions onto a rotating wafer, similar to spin-coating. Advantages include a more continuous overall fabrication process, lower particle level, no cross contamination from the back side of a wafer, and less usage of harsh chemicals for a lower environmental impact. Rapid rotation of the wafer during rinsing can be more effective, but centrifugal forces can pull spiral-like ribbons of liquid radially outward from the advancing wave-front where particles can build up, causing higher instances of device failure at these locations. A better understanding of the rinsing flow is essential for reducing yield losses while taking advantage of the benefits of rotation. In the present work, high-speed video and image processing are used to study the dynamics of the advancing wave-front from an impinging jet on a rotating substrate. The flow-rate and rotation-speed are varied for substrates coated with a thin layer of a second liquid that has a different surface tension than the jet liquid. The difference in surface tension of the two fluids gives rise to Marangoni stresses at the interface that have a significant impact on the rinsing process, despite the extremely short time-scales involved.
The effect of three whitening oral rinses on enamel micro-hardness.
Potgieter, E; Osman, Y; Grobler, S R
2014-05-01
The purpose of this study was to determine the effect on human enamel micro-hardness of three over-the-counter whitening oral rinses available in South Africa. Enamel fragments were gathered into three groups of 15 each. One group was exposed to Colgate Plax Whitening Blancheur, the second group to White Glo 2 in 1 and the third to Plus White, in each case for periods recommended by the respective manufacturers. Surface micro-hardness of all groups was measured before and after a 14 day treatment period. pH levels of the oral rinses were also determined with a combination pH electrode. Pre- and post- treatment data were analysed by the Wilcoxon Signed Rank Sum Test. According to the micro-hardness values no significant (p > 0.05) enamel damage was found as a result of treatment. However, it was observed that Colgate Pax and White Glo decreased the enamel hardness, an early sign of enamel damage, while Plus White showed a small increase in hardness. The three whitening oral rinses on the South African market do not damage the tooth enamel significantly when used as recommended by the manufacturers. However, extending the contact period and increasing the frequency of application might lead to damage of enamel.
Ercumen, Ayse; Pickering, Amy J; Kwong, Laura H; Arnold, Benjamin F; Parvez, Sarker Masud; Alam, Mahfuja; Sen, Debashis; Islam, Sharmin; Kullmann, Craig; Chase, Claire; Ahmed, Rokeya; Unicomb, Leanne; Luby, Stephen P; Colford, John M
2017-08-01
Fecal-oral pathogens are transmitted through complex, environmentally mediated pathways. Sanitation interventions that isolate human feces from the environment may reduce transmission but have shown limited impact on environmental contamination. We conducted a study in rural Bangladesh to (1) quantify domestic fecal contamination in settings with high on-site sanitation coverage; (2) determine how domestic animals affect fecal contamination; and (3) assess how each environmental pathway affects others. We collected water, hand rinse, food, soil, and fly samples from 608 households. We analyzed samples with IDEXX Quantitray for the most probable number (MPN) of E. coli. We detected E. coli in source water (25%), stored water (77%), child hands (43%), food (58%), flies (50%), ponds (97%), and soil (95%). Soil had >120 000 mean MPN E. coli per gram. In compounds with vs without animals, E. coli was higher by 0.54 log 10 in soil, 0.40 log 10 in stored water and 0.61 log 10 in food (p < 0.05). E. coli in stored water and food increased with increasing E. coli in soil, ponds, source water and hands. We provide empirical evidence of fecal transmission in the domestic environment despite on-site sanitation. Animal feces contribute to fecal contamination, and fecal indicator bacteria do not strictly indicate human fecal contamination when animals are present.
2017-01-01
Fecal-oral pathogens are transmitted through complex, environmentally mediated pathways. Sanitation interventions that isolate human feces from the environment may reduce transmission but have shown limited impact on environmental contamination. We conducted a study in rural Bangladesh to (1) quantify domestic fecal contamination in settings with high on-site sanitation coverage; (2) determine how domestic animals affect fecal contamination; and (3) assess how each environmental pathway affects others. We collected water, hand rinse, food, soil, and fly samples from 608 households. We analyzed samples with IDEXX Quantitray for the most probable number (MPN) of E. coli. We detected E. coli in source water (25%), stored water (77%), child hands (43%), food (58%), flies (50%), ponds (97%), and soil (95%). Soil had >120 000 mean MPN E. coli per gram. In compounds with vs without animals, E. coli was higher by 0.54 log10 in soil, 0.40 log10 in stored water and 0.61 log10 in food (p < 0.05). E. coli in stored water and food increased with increasing E. coli in soil, ponds, source water and hands. We provide empirical evidence of fecal transmission in the domestic environment despite on-site sanitation. Animal feces contribute to fecal contamination, and fecal indicator bacteria do not strictly indicate human fecal contamination when animals are present. PMID:28686435
DOE Office of Scientific and Technical Information (OSTI.GOV)
Estill, C.F.; Kovein, R.J.; Jones, J.H.
1999-03-26
The National Institute for Occupational Safety and Health (NIOSH) is currently conducting research on ventilation controls to reduce furniture stripping exposures to methylene chloride to the OSHA PEL of 25 ppm. Low cost ventilation systems were designed by NIOSH researchers along with Benny Bixenman of Benco Sales, Inc. (Forney, TX). The controls were constructed and installed by Benco Sales. This report compares the methylene chloride levels of one worker stripping furniture using the recently installed ventilation controls and using the existing controls. During the survey, two different chemical stripping solutions (a standard formulation and a low methylene chloride content formulation)more » were used and compared. This survey tested three control combinations: (1) new ventilation, low methylene chloride stripper, (2) new ventilation, standard stripping solution, and (3) old ventilation, standard stripping solution. During each test, sorbent tube sampling and real-time sampling were employed. Sorbent tube, data collected in the worker's breathing zone, ranged from 300 to 387 ppm. Real-time data showed breathing zone exposures to range from 211 to 383 ppm while stripping and 164 to 230 ppm while rinsing. Data were inconclusive to determine which ventilation system or stripping solution produced the lowest exposures. Recommendations are made in the report to improve the newly installed ventilation controls.« less
Long-Range Order in Cylindrical Block Copolymer Thin Films using Graphoepitaxy
NASA Astrophysics Data System (ADS)
Dadmun, Mark; Lowndes, Doug
2005-03-01
A block copolymer thin film of polystyrene and methyl methacrylate on a neutral surface forms cylinders that are removed by UV exposure and rinsing, creating a template for the deposition of nickel nanodots, which are subsequently used to grow carbon nanofibers. Additionally, graphoepitaxy is used to successfully induce long-range order in hexagonally packed cylinders. The kinetics of the ordering process, limitations on this technique, and specific sample preparation conditions for successful transfer of the porous template to the deposited nanodots will also be discussed
Pierce Campbell, Christine M; Giuliano, Anna R; Torres, B Nelson; O'Keefe, Michael T; Ingles, Donna J; Anderson, Rebecca L; Teras, Lauren R; Gapstur, Susan M
2016-04-01
Secretory leukocyte protease inhibitor (SLPI) is an innate-immunity protein displaying antimicrobial and anti-inflammatory properties that is found in high concentrations in saliva. The role of extracellular salivary SLPI in head and neck squamous cell carcinoma (HNSCC) remains unclear. Thus, we aimed to evaluate the association between SLPI and HNSCC risk in the Cancer Prevention Study II Nutrition Cohort. Among 53,180 men and women with no history of cancer who provided an oral rinse between 2001 and 2002, 60 were subsequently diagnosed with incident HNSCC between specimen collection and June 2009. In this nested case-control study, archived oral supernatants were evaluated using the Human SLPI Quantikine ELISA Kit for all 60 cases and 180 controls individually matched on gender, race, date of birth, and date of oral rinse collection. Conditional logistic regression was used to estimate HNSCC risk. Overall, pre-diagnostic salivary SLPI was associated with a non-statistically significant higher risk of HNSCC (OR=1.6, 95% CI=0.9-3.0). Among never smokers, high SLPI was associated with a non-statistically significant lower risk (OR=0.5, 95% CI=0.1-1.9), whereas among ever smokers, high SLPI was associated with a statistically significant higher risk (OR=2.1, 95% CI=1.0-4.3) of HNSCC, compared to low SLPI. While results from this study suggest that higher concentrations of salivary SLPI might increase the risk of HNSCC among ever smokers, more research is needed to verify these findings and define the mechanisms by which SLPI and smoking influence the etiology of HNSCC. Copyright © 2016 Elsevier Ltd. All rights reserved.
Bartz, Faith E.; Lickness, Jacquelyn Sunshine; Heredia, Norma; Fabiszewski de Aceituno, Anna; Newman, Kira L.; Hodge, Domonique Watson; Jaykus, Lee-Ann; García, Santos
2017-01-01
ABSTRACT To improve food safety on farms, it is critical to quantify the impact of environmental microbial contamination sources on fresh produce. However, studies are hampered by difficulties achieving study designs with powered sample sizes to elucidate relationships between environmental and produce contamination. Our goal was to quantify, in the agricultural production environment, the relationship between microbial contamination on hands, soil, and water and contamination on fresh produce. In 11 farms and packing facilities in northern Mexico, we applied a matched study design: composite samples (n = 636, equivalent to 11,046 units) of produce rinses were matched to water, soil, and worker hand rinses during two growing seasons. Microbial indicators (coliforms, Escherichia coli, Enterococcus spp., and somatic coliphage) were quantified from composite samples. Statistical measures of association and correlations were calculated through Spearman's correlation, linear regression, and logistic regression models. The concentrations of all microbial indicators were positively correlated between produce and hands (ρ range, 0.41 to 0.75; P < 0.01). When E. coli was present on hands, the handled produce was nine times more likely to contain E. coli (P < 0.05). Similarly, when coliphage was present on hands, the handled produce was eight times more likely to contain coliphage (P < 0.05). There were relatively low concentrations of indicators in soil and water samples, and a few sporadic significant associations were observed between contamination of soil and water and contamination of produce. This methodology provides a foundation for future field studies, and results highlight the need for interventions surrounding farmworker hygiene and sanitation to reduce microbial contamination of farmworkers' hands. IMPORTANCE This study of the relationships between microbes on produce and in the farm environment can be used to support the design of targeted interventions to prevent or reduce microbial contamination of fresh produce with associated reductions in foodborne illness. PMID:28363965
Bartz, Faith E; Lickness, Jacquelyn Sunshine; Heredia, Norma; Fabiszewski de Aceituno, Anna; Newman, Kira L; Hodge, Domonique Watson; Jaykus, Lee-Ann; García, Santos; Leon, Juan S
2017-06-01
To improve food safety on farms, it is critical to quantify the impact of environmental microbial contamination sources on fresh produce. However, studies are hampered by difficulties achieving study designs with powered sample sizes to elucidate relationships between environmental and produce contamination. Our goal was to quantify, in the agricultural production environment, the relationship between microbial contamination on hands, soil, and water and contamination on fresh produce. In 11 farms and packing facilities in northern Mexico, we applied a matched study design: composite samples ( n = 636, equivalent to 11,046 units) of produce rinses were matched to water, soil, and worker hand rinses during two growing seasons. Microbial indicators (coliforms, Escherichia coli , Enterococcus spp., and somatic coliphage) were quantified from composite samples. Statistical measures of association and correlations were calculated through Spearman's correlation, linear regression, and logistic regression models. The concentrations of all microbial indicators were positively correlated between produce and hands (ρ range, 0.41 to 0.75; P < 0.01). When E. coli was present on hands, the handled produce was nine times more likely to contain E. coli ( P < 0.05). Similarly, when coliphage was present on hands, the handled produce was eight times more likely to contain coliphage ( P < 0.05). There were relatively low concentrations of indicators in soil and water samples, and a few sporadic significant associations were observed between contamination of soil and water and contamination of produce. This methodology provides a foundation for future field studies, and results highlight the need for interventions surrounding farmworker hygiene and sanitation to reduce microbial contamination of farmworkers' hands. IMPORTANCE This study of the relationships between microbes on produce and in the farm environment can be used to support the design of targeted interventions to prevent or reduce microbial contamination of fresh produce with associated reductions in foodborne illness. Copyright © 2017 American Society for Microbiology.
Kvitvang, Hans F N; Bruheim, Per
2015-08-15
Capillary ion chromatography (capIC) is the premium separation technology for low molecular phosphometabolites and nucleotides in biological extracts. Removal of excessive amounts of salt during sample preparation stages is a prerequisite to enable high quality capIC separation in combination with reproducible and sensitive MS detection. Existing sampling protocols for mammalian cells used for GC-MS and LC-MS metabolic profiling can therefore not be directly applied to capIC separations. Here, the development of a fast filtration sampling protocol for mammalian suspension cells tailored for quantitative profiling of the phosphometabolome on capIC-MS/MS is presented. The whole procedure from sampling the culture to transfer of filter to quenching and extraction solution takes less than 10s. To prevent leakage it is critical that a low vacuum pressure is applied, and satisfactorily reproducibility was only obtained by usage of a vacuum pressure controlling device. A vacuum of 60mbar was optimal for filtration of multiple myeloma Jjn-3 cell cultures through 5μm polyvinylidene (PVDF) filters. A quick deionized water (DI-water) rinse step prior to extraction was tested, and significantly higher metabolite yields were obtained during capIC-MS/MS analyses in this extract compared to extracts prepared by saline and reduced saline (25%) washing steps only. In addition, chromatographic performance was dramatically improved. Thus, it was verified that a quick DI-water rinse is tolerated by the cells and can be included as the final stage during filtration. Over 30 metabolites were quantitated in JJN-3 cell extracts by using the optimized sampling protocol with subsequent capIC-MS/MS analysis, and up to 2 million cells can be used in a single filtration step for the chosen filter and vacuum pressure. The technical set-up is also highly advantageous for microbial metabolome filtration protocols after optimization of vacuum pressure and washing solutions, and the reduced salt content of the extract will also improve the quality of LC-MS analysis due to lower salt adduct ion formation. Copyright © 2015 Elsevier B.V. All rights reserved.
Rosen, Brian J; Walter, Leora; Gilman, Robert H; Cabrerra, Lilia; Gravitt, Patti E; Marks, Morgan A
2016-03-01
The incidence of human papillomavirus (HPV) associated head and neck cancers (HNCs) have been increasing in Peru. However, the burden of oral HPV infection in Peru has not been assessed. The objective of this cross-sectional study was to estimate the prevalence and correlates of oral HPV infection in a population-based sample from males and females from Lima, Peru. Between January 2010 and June 2011, a population-based sample of 1099 individuals between the ages of 10 and 85 from a low-income neighbourhood in Lima, Peru was identified through random household sampling. Information on demographic, sexual behaviours, reproductive factors and oral hygiene were collected using interviewer-administered questionnaires. Oral rinse specimens were collected from each participant, and these specimens were genotyped using the Roche Linear Array assay. ORs were used to assess differences in the prevalence of any oral HPV and any high-risk oral HPV infection by demographic factors, sexual practices and oral hygiene among individuals 15+ years of age. The prevalence of any HPV and any high-risk HPV (HR-HPV) was 6.8% and 2.0%, respectively. The three most common types were HPV 55 (3.4%), HPV 6 (1.5%) and HPV 16 (1.1%). Male sex (aOR, 2.21; 95% CI 1.22 to 4.03) was associated with any HPV infection after adjustment. The prevalence of oral HPV in this study was similar to estimates observed in the USA. Higher prevalence of oral infections in males was consistent with a male predominance of HPV-associated HNCs and may signal a sex-specific aetiology in the natural history of infection. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Development of Electrically Conductive Transparent Coatings for Acrylic Plastic
1952-12-01
after drying, but increased to 4,000 megoihms/square after 16 hours. 4. Polyacrylic-polyamine Cop-lyrrvrs Aqueous solutions of polymethacrylic acid ...methacrylic acid -methyl methaerylate copolymer re•I. The composite material, i. e., the acrylic and applied coating, retains essentially all the original...ation in 5%, NaOH solution for 5 minutes, rinsed in distilled water, immersed with agitation in 1516 nitric acid for 3 minutes and finally rinsed well
Ion exchange treatment of rinse water generated in the galvanizing process.
Marañón, Elena; Fernández, Yolanda; Castrillón, Leonor
2005-01-01
A study was conducted of the viability of using the cationic exchange resins Amberlite IR-120 and Lewatit SP-112 to treat rinse water generated in the galvanizing process as well as acidic wastewater containing zinc (Zn) and iron (Fe). Solutions containing either 100 mg/L of Zn at pH 5.6 (rinse water) or Fe and Zn at concentrations of 320 and 200 mg/L at pH 1.5 (acidic water), respectively, were percolated through packed beds until the resins were exhausted. Breakthrough capacities obtained ranged between 1.1 and 1.5 meq metal/mL resin. The elution of metal and the regeneration of resins were performed with hydrochloric acid. The influence of the flowrate used during the loading stage was also studied, with 0.5 bed volumes/min (3.2 cm/min) found to be the optimum flowrate.
Cooking rice in excess water reduces both arsenic and enriched vitamins in the cooked grain.
Gray, Patrick J; Conklin, Sean D; Todorov, Todor I; Kasko, Sasha M
2016-01-01
This paper reports the effects of rinsing rice and cooking it in variable amounts of water on total arsenic, inorganic arsenic, iron, cadmium, manganese, folate, thiamin and niacin in the cooked grain. We prepared multiple rice varietals both rinsed and unrinsed and with varying amounts of cooking water. Rinsing rice before cooking has a minimal effect on the arsenic (As) content of the cooked grain, but washes enriched iron, folate, thiamin and niacin from polished and parboiled rice. Cooking rice in excess water efficiently reduces the amount of As in the cooked grain. Excess water cooking reduces average inorganic As by 40% from long grain polished, 60% from parboiled and 50% from brown rice. Iron, folate, niacin and thiamin are reduced by 50-70% for enriched polished and parboiled rice, but significantly less so for brown rice, which is not enriched.
Kanjana, Worarad; Suzuki, Tomohiro; Ishii, Kazuo; Kozaki, Toshinori; Iigo, Masayuki; Yamane, Kenji
2016-08-08
Ornamental peaches cv. 'Yaguchi' (Prunus persica (L.) Batsch) can be propagated via seeds. The establishment of efficient seed treatments for early germination and seedling growth is required to shorten nursery and breeding periods. It is important, therefore, to identify potential candidate genes responsible for the effects of rinsing and chilling on seed germination. We hypothesized that longer rinsing combined with chilling of seeds can alter the genes expression in related to dormancy and then raise the germination rate in the peach. To date, most molecular studies in peaches have involved structural genomics, and few transcriptome studies of seed germination have been conducted. In this study, we investigated the function of key seed dormancy-related genes using next-generation sequencing to profile the transcriptomes involved in seed dormancy in peaches. De novo assembly and analysis of the transcriptome identified differentially expressed and unique genes present in this fruit. De novo RNA-sequencing of peach was performed using the Illumina Miseq 2000 system. Paired-end sequence from mRNAs generated high quality sequence reads (9,049,964, 10,026,362 and 10,101,918 reads) from 'Yaguchi' peach seeds before rinsed (BR) and after rinsed for 2 or 7 days with a chilling period of 4 weeks (termed 2D4W and 7D4W), respectively. The germination rate of 7D4W was significantly higher than that of 2D4W. In total, we obtained 51,366 unique sequences. Differential expression analysis identified 7752, 8469 and 506 differentially expressed genes from BR vs 2D4W, BR vs 7D4W and 2D4W vs 7D4W libraries respectively, filtered based on p-value and an adjusted false discovery rate of less than 0.05. This study identified genes associated with the rinsing and chilling process that included those associated with phytohormones, the stress response and transcription factors. 7D4W treatment downregulated genes involved in ABA synthesis, catabolism and signaling pathways, which eventually suppressed abscisic acid activity and consequently promoted germination and seedling growth. Stress response genes were also downregulated by the 7D4W treatment, suggesting that this treatment released seeds from endodormancy. Transcription factors were upregulated by the BR and 2D4W treatment, suggesting that they play important roles in maintaining seed dormancy. This work indicated that longer rinsing combined with chilling affects gene expression and germination rate, and identified potential candidate genes responsible for dormancy progression in seeds of 'Yaguchi' peach. The results could be used to develop breeding programs and will aid future functional genomic research in peaches and other fruit trees.
Burgess, Elizabeth A; Hunt, Kathleen E; Kraus, Scott D; Rolland, Rosalind M
2016-01-01
Studies are progressively showing that vital physiological data may be contained in the respiratory vapour (blow) of cetaceans. Nonetheless, fundamental methodological issues need to be addressed before hormone analysis of blow can become a reliable technique. In this study, we performed controlled experiments in a laboratory setting, using known doses of pure parent hormones, to validate several technical factors that may play a crucial role in hormone analyses. We evaluated the following factors: (i) practical field storage of samples on small boats during daylong trips; (ii) efficiency of hormone extraction methods; and (iii) assay interference of different sampler types (i.e. veil nylon, nitex nylon mesh and polystyrene dish). Sampling materials were dosed with mock blow samples of known mixed hormone concentrations (progesterone, 17β-estradiol, testosterone, cortisol, aldosterone and triiodothyronine), designed to mimic endocrine profiles characteristic of pregnant females, adult males, an adrenal glucocorticoid response or a zero-hormone control (distilled H 2 O). Results showed that storage of samples in a cooler on ice preserved hormone integrity for at least 6 h ( P = 0.18). All sampling materials and extraction methods yielded the correct relative patterns for all six hormones. However, veil and nitex mesh produced detectable assay interference (mean 0.22 ± 0.04 and 0.18 ± 0.03 ng/ml, respectively), possibly caused by some nylon-based component affecting antibody binding. Polystyrene dishes were the most efficacious sampler for accuracy and precision ( P < 0.001), but required an ethanol rinse for improved progesterone recovery (increased 81%; P < 0.001). Awareness of assay interference from exogenous materials is crucial to future studies. This study establishes critical groundwork to help ensure that hormones can be measured accurately in samples obtained from field collections of whale blow.
Urea and lipid extraction treatment effects on δ(15)N and δ(13)C values in pelagic sharks.
Li, Yunkai; Zhang, Yuying; Hussey, Nigel E; Dai, Xiaojie
2016-01-15
Stable isotope analysis (SIA) provides a powerful tool to investigate diverse ecological questions for marine species, but standardized values are required for comparative assessments. For elasmobranchs, their unique osmoregulatory strategy involves retention of (15)N-depleted urea in body tissues and this may bias δ(15)N values. This may be a particular problem for large predatory species, where δ(15)N discrimination between predator and consumed prey can be small. We evaluated three treatments (deionized water rinsing [DW], chloroform/methanol [LE] and combined chloroform/methanol and deionized water rinsing [LE+DW]) applied to white muscle tissue of 125 individuals from seven pelagic shark species to (i) assess urea and lipid effects on stable isotope values determined by IRMS and (ii) investigate mathematical normalization of these values. For all species examined, the δ(15)N values and C:N ratios increased significantly following all three treatments, identifying that urea removal is required prior to SIA of pelagic sharks. The more marked change in δ(15)N values following DW (1.3 ± 0.4‰) and LE+DW (1.2 ± 0.6‰) than following LE alone (0.7 ± 0.4‰) indicated that water rinsing was more effective at removing urea. The DW and LE+DW treatments lowered the %N values, resulting in an increase in C:N ratios from the unexpected low values of <2.6 in bulk samples to ~3.1 ± 0.1, the expected value of protein. The δ(13)C values of all species also increased significantly following LE and LE+DW treatments. Given the mean change in δ(15)N(1.2 ± 0.6‰) and δ(13)C values (0.7 ± 0.4‰) across pelagic shark species, it is recommended that muscle tissue samples be treated with LE+DW to efficiently extract both urea and lipids to standardize isotopic values. Mathematical normalization of urea and lipid-extracted δ(15)N(LE+DW) and δ(13)C(LE+DW) values using the lipid-extracted δ(15)N(LE) and δ(13)C(LE) data were established for all pelagic shark species. Copyright © 2015 John Wiley & Sons, Ltd.
Pickering, Amy J; Ercumen, Ayse; Arnold, Benjamin F; Kwong, Laura H; Parvez, Sarker Masud; Alam, Mahfuja; Sen, Debashis; Islam, Sharmin; Kullmann, Craig; Chase, Claire; Ahmed, Rokeya; Unicomb, Leanne; Colford, John M; Luby, Stephen P
2018-06-14
Enteric pathogens can be transmitted through multiple environmental pathways, yet little is known about the relative contribution of each pathway to diarrhea risk among children. We aimed to identify fecal transmission pathways in the household environment associated with prospectively measured child diarrhea in rural Bangladesh. We measured the presence and levels of E. coli in tubewells, stored drinking water, pond water, child hand rinses, courtyard soil, flies, and food in 1843 households. Gastrointestinal symptoms among children ages 0-60 months were recorded concurrently at the time of environmental sample collection and again a median of 6 days later. Incident diarrhea (3 or more loose stools in a 24-hr period) was positively associated with the concentration of E. coli on child hands measured on the first visit (incidence rate ratio [IRR]=1.23, 95% CI 1.06, 1.43 for a log10 increase), while other pathways were not associated. In cross-sectional analysis, there were no associations between concurrently measured environmental contamination and diarrhea. Our findings suggest higher levels of E. coli on child hands are strongly associated with subsequent diarrheal illness rates among children in rural Bangladesh.
Kofoed, Kristian; Norrbom, Christina; Forslund, Ola; Møller, Charlotte; Frøding, Ligita P; Pedersen, Anders Elm; Markauskas, Algirdas; Blomberg, Maria; Baumgartner-Nielsen, Jane; Madsen, Jakob Torp; Strauss, Gitte; Madsen, Klaus G; Sand, Carsten
2015-02-01
Risk of human papillomavirus (HPV) transmission during laser vaporisation of genital warts or loop electrode excision procedure is controversial. An oral rinse, a nasal swabs, history of HPV related diseases and data on HPV exposure were collected from 287 employees at departments of dermato-venerology and gynaecology in Denmark. A mucosal HPV type was found among 5.8% of employees with experience of laser treatment of genital warts as compared to 1.7% of those with no experience (p = 0.12). HPV prevalence was not higher in employees participating in electrosurgical treatment or cryotherapy of genital warts, or loop electrode excision procedure compared with those who did not. HPV 6 or 11 were not detected in any samples. Hand warts after the age of 24 years was more common among dermatology than among non-dermatology personnel (18% vs. 8.0%, p = 0.03). Mucosal HPV types are infrequent in the oral and nasal cavity of health care personnel, however, employees at departments of dermato-venereology are at risk of acquiring hand warts.
Buhr, R J; Cason, J A; Dickens, J A; Hinton, A; Ingram, K D
2000-03-01
Four trials were conducted to determine whether conventional solid or elevated wire mesh flooring, during transport and holding of broilers prior to slaughter, influenced the number of bacteria recovered from feathered and defeathered carcasses. After 4 h off feed, 7-wk-old broilers were placed at commercial density into a modified commercial transport dump-coop on either fiberglass sheeting or 2.54x2.54 cm wire mesh flooring that allowed feces to fall through. Broilers were transported for 1 h and then held for 13 h under a covered shed before processing. Broilers were killed by electrocution, and the vents were plugged to prevent escape of feces. External carcass rinses were obtained twice (from the same carcass) from eight broilers per flooring treatment per trial, before scalding and defeathering and again after defeathering and removal of the head and feet. Greater numbers of total aerobes, coliforms, and Escherichia coli were recovered from feathered carcasses than from defeathered carcasses. Campylobacter count was also less for defeathered than feathered carcasses from the solid flooring treatment but did not significantly decrease following defeathering of carcasses from the wire flooring. The incidence of Campylobacter-positive carcasses was reduced following defeathering for both flooring treatments, but the percentage of Salmonellae-positive carcasses remained constant. Coliform (log10 6.20 vs. 5.63 cfu/mL of rinse) and E. coli (log10 5.93 vs. 5.36) counts in the feathered rinses were significantly higher for the solid flooring compared with wire flooring, respectively. After defeathering, the number of coliforms (log10 3.12) and E. coli (log10 2.91) recovered did not differ between flooring treatments. Aerobic plate count (log10 7.06 and 4.02), Campylobacter count (log10 2.49 and 1.80), and the incidence of Campylobacter-positive (44 and 11%) and Salmonellae-positive (52 and 50%) carcasses for feathered and defeathered rinses, respectively, did not differ between flooring treatments. These results indicate that although broilers transported and held on solid flooring had noticeably dirtier breast feathers and higher coliform and E. coli counts prior to scalding and defeathering, bacteria recovery from external carcass rinses did not differ between the solid and wire flooring treatments after defeathering.
Pollution in coastal fog at Alto Patache, Northern Chile.
Sträter, Ellen; Westbeld, Anna; Klemm, Otto
2010-11-01
The Atacama Desert in Northern Chile is one of the most arid places on earth. However, fog occurs regularly at the coastal mountain range and can be collected at different sites in Chile to supply settlements at the coast with freshwater. This is also planned in the fog oasis Alto Patache (20°49'S, 70°09'W). For this pilot study, we collected fog water samples in July and August 2008 for chemical analysis to find indications for its suitability for domestic use. Fog water samples were taken with a cylindrical scientific fog collector and from the net and the storage tank of a Large Fog Collector (LFC). The pHs of advective fog, originating from the stratus cloud deck over the Eastern Pacific, varied between 2.9 and 3.5. Orographic fog, which was formed locally, exhibited a pH of 2.5. About 50% of the total ionic concentration was due to sea salt. High percentages of sulfate and very high enrichment factors (versus sea salt) of heavy metals were found. Both backward trajectories and the enrichment factors indicate that the high concentrations of ions and heavy metals in fog were influenced by anthropogenic activities along the Chilean Pacific Coast such as power plants, mining, and steel industry. We found no direct indication for the importance of other sources such as the emission of dimethyl sulfide from the ocean and subsequent atmospheric oxidation for acidity and sulfate or soil erosion for heavy metal concentrations. When fog water was collected by the LFC, it apparently picked up large amounts of dry deposition which accumulated on the nets during fog-free periods. This material is rinsed off the collector shortly after the onset of a fog event with the water collected first. During the first flush, some concentrations of acidity, nitrate, As, and Se, largely exceeded the Chilean drinking water limits. Before any use of fog water for domestic purpose, its quality should be checked on a regular basis. Strategies to mitigate fog water pollution are given.
The use of hormones indicators in human saliva in diagnosing parodontitis in pregnant women
Dolomatov, S. I.; Zukow, W.; Atmazhov, I. D.; Muszkieta, R.; Skaliy, A.
2012-01-01
AIMS: The purpose of this work– was to study the dynamics of biochemical parameters of human saliva and analyze the features of the chemical composition of the saliva of women with abnormal pregnancy and in periodontitis against pregnancy. MATERIALS AND METHODS: The study included four groups of women: a control group of nonpregnant women of childbearing age (10), pregnant women with physiological pregnancy (24-28 weeks) without any signs of periodontal disease (10), pregnant with a generalized periodontitis I--II degrees in remission (10), women with pathological pregnancy with no signs of periodontal inflammation (10). In each of the groups over two samples of saliva were collected, the first collection of saliva in the morning on an empty stomach. Then mouthwash 0.9% sodium chloride solution was assigned and after 30 minutes the second portion of saliva. By enzyme immunoassay in samples of saliva of control groups of nonpregnant and pregnant women, as well as women with signs of a pathological course of pregnancy, the content of estriol, testosterone, and dehydroepiandrosterone sulfate was determined. STATISTICAL ANALYSIS USED: Statistical data analysis was performed by the standard technique using Student's t-test. RESULTS: The results of biochemical analysis of saliva samples collected before rinsing the mouth with saline in groups of healthy nonpregnant and pregnant women were compared. It was established that during pregnancy the concentration of salivary estriol increases, but in pregnant women with periodontitis, the amount of this hormone in the saliva was significantly reduced. The highest content of testosterone in saliva samples, observed in healthy pregnant women, was significantly higher than nonpregnant women. In pregnant women with periodontitis concentration of testosterone in saliva is reduced, while remaining significantly higher than its level in the saliva of nonpregnant women. The highest concentration of testosterone is observed in the saliva of healthy pregnant women with periodontitis, but the smallest concentration of testosterone is found in the saliva of nonpregnant women. Also the nonpregnant group has the lowest levels of DHEA in pregnancy, and its content increases almost threefold when periodontal disease further grows CONCLUSIONS: It was established that periodontitis against pregnancy is characterized by higher levels of salivary DHEA sulfate and lower estriol, compared with a control group of pregnant women. PMID:23716938
Fernandez y Mostajo, Mercedes; van der Reijden, Wil A.; Buijs, Mark J.; Beertsen, Wouter; van der Weijden, Fridus; Crielaard, Wim; Zaura, Egija
2014-01-01
Oral bacteria live in symbiosis with the host. Therefore, when mouthwashes are indicated, selective inhibition of taxa contributing to disease is preferred instead of broad-spectrum antimicrobials. The potential selectivity of an oxygenating mouthwash, Ardox-X® (AX), has not been assessed. The aim of this study was to determine the antimicrobial potential of AX and the effects of a twice-daily oral rinse on dental plaque composition. Material and methods: In vitro, 16 oral bacterial strains were tested using agar diffusion susceptibility, minimum inhibitory and minimum bactericidal concentration tests. A pilot clinical study was performed with 25 healthy volunteers. Clinical assessments and microbiological sampling of supragingival plaque were performed at 1 month before the experiment (Pre-exp), at the start of the experiment (Baseline) and after the one-week experimental period (Post-exp). During the experiment individuals used AX mouthwash twice daily in absence of other oral hygiene measures. The microbiological composition of plaque was assessed by 16S rRNA gene amplicon sequencing. Results: AX showed high inter-species variation in microbial growth inhibition. The tested Prevotella strains and Fusobacterium nucleatum showed the highest sensitivity, while streptococci and Lactobacillus acidophilus were most resistant to AX. Plaque scores at Pre-exp and Baseline visits did not differ significantly (p = 0.193), nor did the microbial composition of plaque. During a period of 7-days non-brushing but twice daily rinsing plaque scores increased from 2.21 (0.31) at Baseline to 2.43 (0.39) Post-exp. A significant microbial shift in composition was observed: genus Streptococcus and Veillonella increased while Corynebacterium, Haemophilus, Leptotrichia, Cardiobacterium and Capnocytophaga decreased (p ≤ 0.001). Conclusion: AX has the potential for selective inhibition of oral bacteria. The shift in oral microbiome after 1 week of rinsing deserves further research. PMID:25101249