Emerging Technologies for Environmental Remediation: Integrating Data and Judgment.

PubMed

Bates, Matthew E; Grieger, Khara D; Trump, Benjamin D; Keisler, Jeffrey M; Plourde, Kenton J; Linkov, Igor

2016-01-05

Emerging technologies present significant challenges to researchers, decision-makers, industry professionals, and other stakeholder groups due to the lack of quantitative risk, benefit, and cost data associated with their use. Multi-criteria decision analysis (MCDA) can support early decisions for emerging technologies when data is too sparse or uncertain for traditional risk assessment. It does this by integrating expert judgment with available quantitative and qualitative inputs across multiple criteria to provide relative technology scores. Here, an MCDA framework provides preliminary insights on the suitability of emerging technologies for environmental remediation by comparing nanotechnology and synthetic biology to conventional remediation methods. Subject matter experts provided judgments regarding the importance of criteria used in the evaluations and scored the technologies with respect to those criteria. The results indicate that synthetic biology may be preferred over nanotechnology and conventional methods for high expected benefits and low deployment costs but that conventional technology may be preferred over emerging technologies for reduced risks and development costs. In the absence of field data regarding the risks, benefits, and costs of emerging technologies, structuring evidence-based expert judgment through a weighted hierarchy of topical questions may be helpful to inform preliminary risk governance and guide emerging technology development and policy.

QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2011-01-01

QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

10 CFR 611.103 - Application evaluation.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Technical Program Factors such as economic development and diversity in technology, company, risk, and... DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE..., the following: (1) The technical merit of the proposed advanced technology vehicles or qualifying...

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

NASA Astrophysics Data System (ADS)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

Financial options methodology for analyzing investments in new technology

NASA Technical Reports Server (NTRS)

Wenning, B. D.

1995-01-01

The evaluation of investments in longer term research and development in emerging technologies, because of the nature of such subjects, must address inherent uncertainties. Most notably, future cash flow forecasts include substantial uncertainties. Conventional present value methodology, when applied to emerging technologies severely penalizes cash flow forecasts, and strategic investment opportunities are at risk of being neglected. Use of options evaluation methodology adapted from the financial arena has been introduced as having applicability in such technology evaluations. Indeed, characteristics of superconducting magnetic energy storage technology suggest that it is a candidate for the use of options methodology when investment decisions are being contemplated.

The Next Step: Managing Your District's Technology Operations.

ERIC Educational Resources Information Center

Pereus, Stephen C.

2001-01-01

Discusses benefits and especially risks involved with educational technology: unexpected costs; possible negative effects on student achievement; legal, ethical, and security issues; and resistance to change. Success ensues from providing leadership and vision, updating technology planning, evaluating alternatives, setting standards, involving…

Risk evaluation of highway engineering project based on the fuzzy-AHP

NASA Astrophysics Data System (ADS)

Yang, Qian; Wei, Yajun

2011-10-01

Engineering projects are social activities, which integrate with technology, economy, management and organization. There are uncertainties in each respect of engineering projects, and it needs to strengthen risk management urgently. Based on the analysis of the characteristics of highway engineering, and the study of the basic theory on risk evaluation, the paper built an index system of highway project risk evaluation. Besides based on fuzzy mathematics principle, analytical hierarchy process was used and as a result, the model of the comprehensive appraisal method of fuzzy and AHP was set up for the risk evaluation of express way concessionary project. The validity and the practicability of the risk evaluation of expressway concessionary project were verified after the model was applied to the practice of a project.

Environmental risks in the developing world: exposure indicators for evaluating interventions, programmes, and policies.

PubMed

Ezzati, Majid; Utzinger, Jürg; Cairncross, Sandy; Cohen, Aaron J; Singer, Burton H

2005-01-01

Monitoring and empirical evaluation are essential components of evidence based public health policies and programmes. Consequently, there is a growing interest in monitoring of, and indicators for, major environmental health risks, particularly in the developing world. Current large scale data collection efforts are generally disconnected from micro-scale studies in health sciences, which in turn have insufficiently investigated the behavioural and socioeconomic factors that influence exposure. A basic framework is proposed for development of indicators of exposure to environmental health risks that would facilitate the (a) assessment of the health effects of risk factors, (b) design and evaluation of interventions and programmes to deliver the interventions, and (c) appraisal and quantification of inequalities in health effects of risk factors, and benefits of intervention programmes and policies. Specific emphasis is put on the features of environmental risks that should guide the choice of indicators, in particular the interactions of technology, the environment, and human behaviour in determining exposure. The indicators are divided into four categories: (a) access and infrastructure, (b) technology, (c) agents and vectors, and (d) behaviour. The study used water and sanitation, indoor air pollution from solid fuels, urban ambient air pollution, and malaria as illustrative examples for this framework. Organised and systematic indicator selection and monitoring can provide an evidence base for design and implementation of more effective and equitable technological interventions, delivery programmes, and policies for environmental health risks in resource poor settings.

Radiation risk from CT: implications for cancer screening.

PubMed

Albert, Jeffrey M

2013-07-01

The cancer risks associated with patient exposure to radiation from medical imaging have become a major topic of debate. The higher doses necessary for technologies such as CT and the increasing utilization of these technologies further increase medical radiation exposure to the population. Furthermore, the use of CT for population-based cancer screening continues to be explored for common malignancies such as lung cancer and colorectal cancer. Given the known carcinogenic effects of ionizing radiation, this warrants evaluation of the balance between the benefit of early cancer detection and the risk of screening-induced malignancy. This report provides a brief review of the process of radiation carcino-genesis and the literature evaluating the risk of malignancy from CT, with a focus on the risks and benefits of CT for cancer screening. The available data suggest a small but real risk of radiation-induced malignancy from CT that could become significant at the population level with widespread use of CT-based screening. However, a growing body of literature suggests that the benefits of CT screening for lung cancer in high-risk patients and CT colonography for colorectal cancer may significantly outweigh the radiation risk. Future studies evaluating the benefits of CT screening should continue to consider potential radiation risks.

10 CFR 609.7 - Programmatic, technical and financial evaluation of Applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advancement of that technology into the commercial marketplace; (4) The extent to which the requested amount... market, regulatory, legal, financial, technological, and other risks associated with the project and...

10 CFR 609.7 - Programmatic, technical and financial evaluation of Applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... advancement of that technology into the commercial marketplace; (4) The extent to which the requested amount... market, regulatory, legal, financial, technological, and other risks associated with the project and...

10 CFR 609.7 - Programmatic, technical and financial evaluation of Applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advancement of that technology into the commercial marketplace; (4) The extent to which the requested amount... market, regulatory, legal, financial, technological, and other risks associated with the project and...

10 CFR 609.7 - Programmatic, technical and financial evaluation of Applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advancement of that technology into the commercial marketplace; (4) The extent to which the requested amount... market, regulatory, legal, financial, technological, and other risks associated with the project and...

10 CFR 609.7 - Programmatic, technical and financial evaluation of Applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... advancement of that technology into the commercial marketplace; (4) The extent to which the requested amount... market, regulatory, legal, financial, technological, and other risks associated with the project and...

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). his evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory....

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). This evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory...

Risk Evaluation of Business Continuity Management by Using Green Technology

NASA Astrophysics Data System (ADS)

Gang, Chen

IT disasters can be seen as the test of the ability in communities and firms to effectively protect their information and infrastructure, to reduce both human and property loss, and to rapidly recover. In this paper, we use a literature meta-analysis method to identify potential research directions in Green Business Continuity Management (GBCM). The concept and characteristics of GBCM are discussed. We analysis the connotation and the sources of green technology risk. An assessment index system is established from the perspectives of GBCM. A fuzzy comprehensive assessment method is introduced to assess the risks of green technology in Business Continuity Management.

SITE EVALUATION OF SOIL AMENDMENT TECHNOLOGIES AT THE CROOKSVILLE/ROSEVILLE POTTERY AREA OF CONCERN - STAR ORGANICS SOIL RESCUE INNOVATIVE TECHNOLOGY EVALUATION REPORT (ITER)

EPA Science Inventory

Star Organics, L.L.C., of Dallas, Texas (Star Organics) has developed Soil Rescue to treat soil contaminated with metals. Star Organics claims that Soil Rescue forms metal complexes that immobilize toxic metals, thereby reducing the risk to human health and the environment. The ...

Use and clinical efficacy of standard and health information technology fall risk assessment tools.

PubMed

Teh, Ruth C; Wilson, Anne; Ranasinghe, Damith; Visvanathan, Renuka

2017-12-01

To evaluate the health information technology (HIT) compared to Fall Risk for Older Persons (FROP) tool in fall risk screening. A HIT tool trial was conducted on the geriatric evaluation and management (GEM, n = 111) and acute medical units (AMU, n = 424). Health information technology and FROP scores were higher on GEM versus AMU, with no differences between people who fell and people who did not fall. Both score completion rates were similar, and their values correlated marginally (Spearman's correlation coefficient 0.33, P < 0.01). HIT and FROP scores demonstrated similar sensitivity (80 vs 82%) and specificity (32 vs 36%) for detecting hospital falls. Hospital fall rates trended towards reduction on AMU (4.20 vs 6.96, P = 0.15) and increase on GEM (10.98 vs 6.52, P = 0.54) with HIT tool implementation. Health information technology tool acceptability and scoring were comparable to FROP screening, with mixed effects on fall rate with HIT tool implementation. Clinician partnership remains key to effective tool development. © 2017 AJA Inc.

Regulatory science based approach in development of novel medical devices.

PubMed

Sakuma, Ichiro

2015-08-01

For development rational evaluation method for medical devices' safety and efficacy, regulatory science studies are important. Studies on regulatory affairs related to a medical device under development should be conducted as well as its technological development. Clinical performance of a medical device is influenced by performance of the device, medical doctors' skill, pathological condition of a patient, and so on. Thus it is sometimes difficult to demonstrate superiority of the device in terms of clinical outcome although its efficacy as a medical device is accepted. Setting of appropriate end points is required to evaluate a medical device appropriately. Risk assessment and risk management are the basis of medical device safety assurance. In case of medical device software, there are difficulties in identifying the risk due to its complexity of user environment and different design and manufacturing procedure compared with conventional hardware based medical devices. Recent technological advancement such as information and communication technologies (ICT) for medical devices and wireless network has raised new issue on risk management: cybersecurity. We have to watch closely the progress of safety standard development.

Technology Evaluation for Environmental Risk Mitigation Compendium

NASA Technical Reports Server (NTRS)

Meinhold, A.; Greene, B.; Dussich, J.; Sorkin, A.; Olsen, W.

2017-01-01

The Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center and its predecessor organization the Acquisition Pollution Prevention Program (AP2) supported the National Aeronautics and Space Administration (NASA) in identifying technology solutions to risks and costs to NASA programs driven by environmental regulations and requirements. TEERM researched the commercial and government marketplace to locate viable and available technologies that met NASAs needs. TEERM focused on addressing environmentally-driven risks of direct concern to NASA programs and facilities, including hazardous materials in NASA operations and materials that became obsolescent because of environmental regulations. TEERM projects aimed to reduce cost; ensure the health and safety of people, assets, and the environment; promote efficiency; and minimize duplication. Major TEERM and AP2 projects focused on waste minimization and hazardous waste treatment, recycling, corrosion prevention and control, solvent and ozone depleting substances substitution, and aqueous based cleaners. In 2017, NASA made the decision to terminate the TEERM Principal Center. This Compendium Report documents TEERM and AP2 project successes. The Compendium Report traces the evolution of TEERM based on evolving risks and requirements for NASA and its relationship to the Space Shuttle Program, the United States Department of Defense, the European Space Agency, and other public and private stakeholders. This Compendium Report also documents project details from Project Summaries and Joint Test Plans and describes project stakeholders and collaborative effort results.

An Evaluation of Methods for Assessing Vulnerability of Army Installations toImpacts of Climate Change on Listed and At-Risk Species

DTIC Science & Technology

2017-07-01

ER D C/ CE RL T R- 17 -2 5 Army Environmental Quality Technology An Evaluation of Methods for Assessing Vulnerability of Army...Evaluation of Methods for Assessing Vulnerability of Army Installations to Impacts of Climate Change on Listed and At-Risk Species Matthew G. Hohmann...their suitability for informing BRAC-related evaluations. Three recently developed methods for assessing the vulnerability of Army installations to

Evaluation of health risks for contaminated aquifers.

PubMed Central

Piver, W T; Jacobs, T L; Medina, M A

1997-01-01

This review focuses on progress in the development of transport models for heterogeneous contaminated aquifers, the use of predicted contaminant concentrations in groundwater for risk assessment for heterogeneous human populations, and the evaluation of aquifer remediation technologies. Major limitations and areas for continuing research for all methods presented in this review are identified. Images Figure 2. PMID:9114282

New research on bioregenerative air/water purification systems

NASA Technical Reports Server (NTRS)

Johnson, Anne H.; Ellender, R. D.; Watkins, Paul J.

1991-01-01

For the past several years, air and water purification systems have been developed and used. This technology is based on the combined activities of plants and microorganisms as they function in a natural environment. More recently, researchers have begun to address the problems associated with indoor air pollution. Various common houseplants are currently being evaluated for their abilities to reduce concentrations of volatile organic compounds (VOCS) such as formaldehyde and benzene. With development of the Space Exploration Initiative, missions will increase in duration, and problems with resupply necessitates implementation of regenerative technology. Aspects of bioregenerative technology have been included in a habitat known as the BioHome. The ultimate goal is to use this technology in conjunction with physicochemical systems for air and water purification within closed systems. This study continued the risk assessment of bioregenerative technology with emphasis on biological hazards. In an effort to evaluate the risk for human infection, analyses were directed at enumeration of fecal streptococci and enteric viruses with the BioHome waste water treatment system.

[Biological evaluation within a risk management process].

PubMed

Zhuang, Fei; Ding, Biao

2007-07-01

Bio-evaluation within the medical device quality/risk management system is a risk analyzing and assessing process. On the basis of data from characterization of materials, scientific literatures, application history, bio-toxicology testing and so on, weighing the benefit and the risk, bio-evaluation does a conclusion to "take" or "quit" the product design. There is no "zero risk" though "no toxicity" always is the most desirable conclusion in a testing report. The application history data is the most comprehensive among the information available, since no testing system can "clone" the human body. In addition, the capital cost has to be taken into account when bringing the sophisticated testing technologies into the evaluating system. Investigating the #G95-1 of FDA CDRH and the changes of ISO 10993-1, the trend to integrate bio-evaluation into a quality/risk management process can be figured out.

Distracted Walking, Bicycling, and Driving: Systematic Review and Meta-Analysis of Mobile Technology and Youth Crash Risk.

PubMed

Stavrinos, Despina; Pope, Caitlin N; Shen, Jiabin; Schwebel, David C

2018-01-01

This article examined the impact of mobile technology on young pedestrians, bicyclists, and drivers. A systematic search yielded 41 articles meeting inclusion criteria: peer-reviewed, published before February 1, 2016, behavioral outcome related to pedestrian, bicycling, or driving in the presence of mobile technology use, youth sample. Eleven studies were meta-analyzed to evaluate increased risk for crash/near-crash while distracted. Risk of bias and quality of research were assessed. Across methodologies, developmental stages, and type of distracting task, mobile technology use impairs youth safety on the road. Quality of evidence was low (pedestrian) to moderate (driving). Findings are discussed from the perspective of cognitive and visual distractions. Policy and behavioral efforts should continue to reduce mobile technology use in transportation settings. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

10 CFR 611.103 - Application evaluation.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Technical Program Factors such as economic development and diversity in technology, company, risk, and... DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE... be reviewed to determine whether the applicant is eligible, the information required under § 611.101...

Illustrative Case Using the RISK21 Roadmap and Matrix: Prioritization for Evaluation of Chemicals Found in Drinking Water

EPA Science Inventory

The HESI-led RISK21 effort has developed a framework supporting the use of twenty first century technology in obtaining and using information for chemical risk assessment. This framework represents a problem formulation-based, exposure-driven, tiered data acquisition approach tha...

Evaluating Assistive Technology in Early Childhood Education: The Use of a Concurrent Time Series Probe Approach

ERIC Educational Resources Information Center

Parette, Howard P.; Blum, Craig; Boeckmann, Nichole M.

2009-01-01

As assistive technology applications are increasingly implemented in early childhood settings for children who are at risk or who have disabilities, it is critical that teachers utilize observational approaches to determine whether targeted assistive technology-supported interventions make a difference in children's learning. One structured…

Methodology for evaluation of railroad technology research projects

DOT National Transportation Integrated Search

1981-04-01

This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

Models of evaluating efficiency and risks on integration of cloud-base IT-services of the machine-building enterprise: a system approach

NASA Astrophysics Data System (ADS)

Razumnikov, S.; Kurmanbay, A.

2016-04-01

The present paper suggests a system approach to evaluation of the effectiveness and risks resulted from the integration of cloud-based services in a machine-building enterprise. This approach makes it possible to estimate a set of enterprise IT applications and choose the applications to be migrated to the cloud with regard to specific business requirements, a technological strategy and willingness to risk.

Financial options methodology for analyzing investments in new technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wenning, B.D.

1994-12-31

The evaluation of investments in longer term research and development in emerging technologies, because of the nature of such subjects, must address inherent uncertainties. Most notably, future cash flow forecasts include substantial uncertainties. Conventional present value methodology, when applied to emerging technologies severely penalizes cash flow forecasts, and strategic investment opportunities are at risk of being neglected. Use of options valuation methodology adapted from the financial arena has been introduced as having applicability in such technology evaluations. Indeed, characteristics of superconducting magnetic energy storage technology suggest that it is a candidate for the use of options methodology when investment decisionsmore » are being contemplated.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anuar, Nuraslinda, E-mail: nuraslinda@uniten.edu.my; Kahar, Wan Shakirah Wan Abdul, E-mail: shakirah@tnb.com.my; Manan, Jamal Abdul Nasir Abd

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that “proven technology” is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for “proven technology” is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the “proven technology” term according to amore » specific country’s requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of “proven technology” that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia’s definition of “proven technology”.« less

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Radiation Hardness Assurance (RHA) challenges associated with the use of commercial-off-the-shelf (COTS) components and emerging technologies are cause for risk acceptance in space flight missions. The RHA flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate the risk a project or program takes. The varied missions profiles and environments don't necessarily benefit from the same risk reduction efforts or cost reduction attempts. The level of effort within the RHA flow can be tailored to minimize risk based on the environment or design criticality.

Electrical Impedance Tomography Technology (EITT) Project

NASA Technical Reports Server (NTRS)

Oliva-Buisson, Yvette J.

2014-01-01

Development of a portable, lightweight device providing two-dimensional tomographic imaging of the human body using impedance mapping. This technology can be developed to evaluate health risks and provide appropriate medical care on the ISS, during space travel and on the ground.

Energy use in the marine transportation industry. Task III. Efficiency improvements. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-02

Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used is discussed in Chapter II. The technology base of the commercial marine transportation industry relating to energy usage is made up of: main propulsion plants, propulsors, hydrodynamics, vessel operations, and fuels. Fifteen specific program areas in the first four generic technologies are identified and are evaluated. An economic and energy impact analysis and technological risk assessment was performed on the specific program areas and the results are summarized in Chapter III. The first five appendices address the generic technologies. The sixth appendixmore » contains the baseline operating and cost parameters against which the 15 program areas were evaluated, and the last appendix contains sample printouts of the MTEM model used to evaluate the energy consumption and economic impacts associated with the candidate technology areas. (MCW)« less

Electronic media, violence, and adolescents: an emerging public health problem.

PubMed

David-Ferdon, Corinne; Hertz, Marci Feldman

2007-12-01

Adolescents' access to and use of new media technology (e.g., cell phone, personal data assistant, computer for Internet access) are on the rise, and this explosion of technology brings with it potential benefits and risks. Attention is growing about the risk of adolescents to become victims of aggression perpetrated by peers with new technology. In September 2006, the Centers for Disease Control and Prevention convened a panel of experts in technology and youth aggression to examine this specific risk. This special issue of the Journal of Adolescent Health presents the data and recommendations for future directions discussed at the meeting. The articles in the Journal support the argument that electronic aggression is an emerging public health problem in need of additional prevalence and etiological research to support the development and evaluation of effective prevention programs.

Emerging technologies in healthcare: navigating risks, evaluating rewards.

PubMed

McGrady, Elizabeth; Conger, Sue; Blanke, Sandra; Landry, Brett J L

2010-01-01

The purpose of this prescriptive research is to help decision makers become better informed about three technologies emerging in the healthcare arena by providing a basic description of the technology and describing their current applications, future healthcare deployment, potential risks, and related managerial issues. Two of the technologies, radio frequency identification (RFID) and global positioning systems (GPS), are currently available to healthcare organizations and appear capable of decreasing cost but may require significant initial investment and have disruptive potential. The third technology, nanotechnology, has limited current use but may revolutionize both the delivery of medicine and hospital infrastructure management. With cautious attention to managerial issues and meticulous attention to implementation details, healthcare organizations that can successfully navigate the coming technologically driven paradigm shifts will emerge more resilient organizations.

In Situ Fabrication and Repair (ISFR) Technologies; New Challenges for Exploration

NASA Technical Reports Server (NTRS)

Bassler, Julie A.; Bodiford, Melanie P.; Hammond, Monica S.; King, Ron; Mclemore, Carole A.; Hall, Nancy R.; Fiske, Michael R.; Ray, Julie A.

2006-01-01

NASA's human exploration initiative poses great opportunity and great risk for manned missions to the Moon and Mars. Engineers and Scientists at the Marshall Space Flight Center (MSFC) are continuing to evaluate current technologies for in situ resource-based exploration fabrication and repair applications. Several technologies to be addressed in this paper have technology readiness levels (TRLs) that are currently mature enough to pursue for exploration purposes. However, while many technologies offer promising applications, these technologies must be pulled along by the demands and applications of this great initiative. The In Situ Fabrication and Repair (ISFR) Element will supply and push state of the art technologies for applications such as habitat structure development, in situ resource utilization for tool and part fabrication, and repair and non-destructive evaluation W E ) of common life support elements. As an overview of the ISFR Element, this paper will address rapid prototyping technologies, their applications, challenges, and near term advancements. This paper will also discuss the anticipated need to utilize in situ resources to produce replacement parts and fabricate repairs to vehicles, habitats, life support and quality of life elements. Overcoming the challenges of ISFR development will provide the Exploration initiative with state of the art technologies that reduce risk, and enhance supportability.

Space-based solar power conversion and delivery systems study. Volume 5: Economic analysis

NASA Technical Reports Server (NTRS)

1977-01-01

Space-based solar power conversion and delivery systems are studied along with a variety of economic and programmatic issues relevant to their development and deployment. The costs, uncertainties and risks associated with the current photovoltaic Satellite Solar Power System (SSPS) configuration, and issues affecting the development of an economically viable SSPS development program are addressed. In particular, the desirability of low earth orbit (LEO) and geosynchronous (GEO) test satellites is examined and critical technology areas are identified. The development of SSPS unit production (nth item), and operation and maintenance cost models suitable for incorporation into a risk assessment (Monte Carlo) model (RAM) are reported. The RAM was then used to evaluate the current SSPS configuration expected costs and cost-risk associated with this configuration. By examining differential costs and cost-risk as a function of postulated technology developments, the critical technologies, that is, those which drive costs and/or cost-risk, are identified. It is shown that the key technology area deals with productivity in space, that is, the ability to fabricate and assemble large structures in space, not, as might be expected, with some hardware component technology.

Activity Monitoring and Heart Rate Variability as Indicators of Fall Risk: Proof-of-Concept for Application of Wearable Sensors in the Acute Care Setting.

PubMed

Razjouyan, Javad; Grewal, Gurtej Singh; Rishel, Cindy; Parthasarathy, Sairam; Mohler, Jane; Najafi, Bijan

2017-07-01

Growing concern for falls in acute care settings could be addressed with objective evaluation of fall risk. The current proof-of-concept study evaluated the feasibility of using a chest-worn sensor during hospitalization to determine fall risk. Physical activity and heart rate variability (HRV) of 31 volunteers admitted to a 29-bed adult inpatient unit were recorded using a single chest-worn sensor. Sensor data during the first 24-hour recording were analyzed. Participants were stratified using the Hendrich II fall risk assessment into high and low fall risk groups. Univariate analysis revealed age, daytime activity, nighttime side lying posture, and HRV were significantly different between groups. Results suggest feasibility of wearable technology to consciously monitor physical activity, sleep postures, and HRV as potential markers of fall risk in the acute care setting. Further study is warranted to confirm the results and examine the efficacy of the proposed wearable technology to manage falls in hospitals. [Journal of Gerontological Nursing, 43(7), 53-62.]. Copyright 2017, SLACK Incorporated.

Risk assessing study for Bio-CCS technology

NASA Astrophysics Data System (ADS)

Tanaka, A.; Sakamoto, Y.; Kano, Y.; Higashino, H.; Suzumura, M.; Tosha, T.; Nakao, S.; Komai, T.

2013-12-01

We have started a new R&D project titled 'Energy resources creation by geo-microbes and CCS'. It is new concept of a technology which cultivate methanogenic geo-microbes in reservoirs of geological CCS conditions to produce methane gas effectively and safely. As one of feasibility studies, we are evaluating risks around its new Bio-CCS technology. Our consideration involves risk scenarios about Bio-CCS in geological strata, marine environment, surface facilities, ambient air and injection sites. To cover risk scenarios in these areas, we are carrying out a sub-project with five sub-themes. Four sub-themes out of five are researches for identifying risk scenarios: A) Underground strata and injection well, B) Ambient air, C) Surface facilities and D) Seabed. We are developing risk assessment tool,named GERAS-CO2GS (Geo-environmental Risk Assessment System,CO2 Geological Storage Risk Assessment System. We are going to combine identified risk scenarios into GERAS-CO2GS accordingly. It is expected that new GERAS-CO2GS will contribute to risk assessment and management for not only Bio-CCS but also individual injection sites, and facilitate under standing of risks among legislators and concerned peoples around injection site.

Novel sensing technology in fall risk assessment in older adults: a systematic review.

PubMed

Sun, Ruopeng; Sosnoff, Jacob J

2018-01-16

Falls are a major health problem for older adults with significant physical and psychological consequences. A first step of successful fall prevention is to identify those at risk of falling. Recent advancement in sensing technology offers the possibility of objective, low-cost and easy-to-implement fall risk assessment. The objective of this systematic review is to assess the current state of sensing technology on providing objective fall risk assessment in older adults. A systematic review was conducted in accordance to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis statement (PRISMA). Twenty-two studies out of 855 articles were systematically identified and included in this review. Pertinent methodological features (sensing technique, assessment activities, outcome variables, and fall discrimination/prediction models) were extracted from each article. Four major sensing technologies (inertial sensors, video/depth camera, pressure sensing platform and laser sensing) were reported to provide accurate fall risk diagnostic in older adults. Steady state walking, static/dynamic balance, and functional mobility were used as the assessment activity. A diverse range of diagnostic accuracy across studies (47.9% - 100%) were reported, due to variation in measured kinematic/kinetic parameters and modelling techniques. A wide range of sensor technologies have been utilized in fall risk assessment in older adults. Overall, these devices have the potential to provide an accurate, inexpensive, and easy-to-implement fall risk assessment. However, the variation in measured parameters, assessment tools, sensor sites, movement tasks, and modelling techniques, precludes a firm conclusion on their ability to predict future falls. Future work is needed to determine a clinical meaningful and easy to interpret fall risk diagnosis utilizing sensing technology. Additionally, the gap between functional evaluation and user experience to technology should be addressed.

Accuracy, risk and the intrinsic value of diagnostic imaging: a review of the cost-utility literature.

PubMed

Otero, Hansel J; Fang, Chi H; Sekar, Meera; Ward, Robert J; Neumann, Peter J

2012-05-01

The aim of this study was to systematically review the reporting of the value of imaging unrelated to treatment consequences and test characteristics in all imaging-related published cost-utility analyses (CUAs) in the medical literature. All CUAs published between 1976 and 2008 evaluating diagnostic imaging technologies contained in the CEA Registry, a publicly available comprehensive database of health related CUAs, were screened. Publication characteristics, imaging modality, and the inclusion of test characteristics including accuracy, costs, risks, and the potential value unrelated to treatment consequences (eg, reassurance or anxiety) were assessed. Ninety-six published CUAs evaluating 155 different imaging technologies were included in the final sample; 27 studies were published in imaging-specialized journals. Fifty-two studies (54%) evaluated the performance of a single imaging modality, while 44 studies (46%) compared two or more different imaging modalities. The most common areas of interest were cardiovascular (45%) and neuroradiology (17%). Forty-two technologies (27%) concerned ultrasound, while 34 (22%) concerned magnetic resonance. Seventy-nine (51%) technologies used ionizing radiation. Test accuracy was reported or calculated for 90% (n = 133 and n = 5, respectively) and assumed perfect (reference test or gold-standard test without alternative testing strategy to capture false-negatives and false-positives) for 8% (n = 12) of technologies. Only 22 studies (23%) assessing 40 imaging technologies (26%) considered inconclusive or indeterminate results. The risk of testing was reported for 32 imaging technologies (21%). Fifteen studies (16%) considered the value of diagnostic imaging unrelated to treatment. Four studies incorporated it as quality-of-life adjustments, while 10 studies mentioned it only in their discussions or as a limitation. The intrinsic value of imaging (the value of imaging unrelated to treatment) has not been appropriately defined or incorporated in the existing cost-utility literature, which could be due to a lack of evidence on the issue. Thus, more research is needed on metrics for a more comprehensive evaluation of diagnostic imaging. Similarly, the incorporation of variations in imaging tests accuracy, inconclusive results and associated risks has lacked uniformity in the cost-utility literature. Acknowledgment of these characteristics in future cost-utility publications will enhance their value and provide results that more closely resemble routine clinical practice. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

Radiation Status of Sub-65 nm Electronics

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.

2011-01-01

Ultra-scaled complementary metal oxide semiconductor (CMOS) includes commercial foundry capabilities at and below the 65 nm technology node Radiation evaluations take place using standard products and test characterization vehicles (memories, logic/latch chains, etc.) NEPP focus is two-fold: (1) Conduct early radiation evaluations to ascertain viability for future NASA missions (i.e. leverage commercial technology development). (2) Uncover gaps in current testing methodologies and mechanism comprehension -- early risk mitigation.

Rapid Chemical Exposure and Dose Research

EPA Pesticide Factsheets

EPA evaluates the potential risks of the manufacture and use of thousands of chemicals. To assist with this evaluation, EPA scientists developed a rapid, automated model using off the shelf technology that predicts exposures for thousands of chemicals.

[Development and clinical evaluation of an anesthesia information management system].

PubMed

Feng, Jing-yi; Chen, Hua; Zhu, Sheng-mei

2010-09-21

To study the design, implementation and clinical evaluation of an anesthesia information management system. To record, process and store peri-operative patient data automatically, all kinds of bedside monitoring equipments are connected into the system based on information integrating technology; after a statistical analysis of those patient data by data mining technology, patient status can be evaluated automatically based on risk prediction standard and decision support system, and then anesthetist could perform reasonable and safe clinical processes; with clinical processes electronically recorded, standard record tables could be generated, and clinical workflow is optimized, as well. With the system, kinds of patient data could be collected, stored, analyzed and archived, kinds of anesthesia documents could be generated, and patient status could be evaluated to support clinic decision. The anesthesia information management system is useful for improving anesthesia quality, decreasing risk of patient and clinician, and aiding to provide clinical proof.

Acceptability and validity of older driver screening with the DrivingHealth Inventory.

PubMed

Edwards, Jerri D; Leonard, Kathleen M; Lunsman, Melissa; Dodson, Joan; Bradley, Stacy; Myers, Charlsie A; Hubble, Bridgette

2008-05-01

Research has indicated that technology can be effectively used to identify high-risk older drivers. However, adaptation of such technology has been limited. Researchers debate whether older drivers represent a safety problem as well as whether they should be screened for driving fitness. The present study examined how drivers feel regarding technological screening and mandatory state testing. The validity and acceptability of a new technological screening battery for identifying high-risk drivers, the DrivingHealth Inventory (DHI), was also evaluated. In a sample of 258 Alabama drivers aged 18-87, older drivers performed significantly worse than younger drivers on sensory, cognitive, and physical subtests of the DHI, and older drivers with a crash history performed worse than older drivers without crashes. Regardless of age, 90% of participants supported states requiring screening for older drivers' license renewal. The majority of the participants (72%) supported use of technological screening batteries such as the DHI as a driver screening tool. Considering the acceptability and potential efficacy of the DHI, it may be a useful tool in evaluating driving fitness among older adults.

NASA Collaborative Approach Mitigates Environmentally-Driven Obsolescence

NASA Technical Reports Server (NTRS)

Greene, Brian; Leeney, Bob; Richards, Joni

2016-01-01

National Aeronautics and Space Administration (NASA) missions, like Department of Defense (DoD) organizations, require the rigorous testing and qualification of critical materials. Obsolescence supply risks created by environmental requirements can affect the cost, schedule and performance of NASA missions and the resilience of critical infrastructure. The NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center helps to identify obsolescence supply risks driven by environmental requirements and works proactively with NASA Centers and Programs, the DoD, the European Space Agency (ESA) and other agencies and partners to identify and evaluate environmentally friendly alternatives. TEERM tracks environmental regulations, identifies the potential loss of material availability and works with NASA programs and Centers to evaluate potential impacts through a risk assessment approach. TEERM collaborative projects identify, demonstrate and evaluate commercially viable alternative technologies and materials. A major focus during the Space Shuttle Program was the need to replace ozone depleting substances that were used in spray foam and cleaning applications. The potential obsolescence of coatings containing hexavalent chromium and the risks associated with lead free solder were also of concern for the Space Shuttle and present ongoing risks to new programs such as the Space Launch System. One current project teams NASA and ESA in the evaluation and testing of individual coatings and coating systems as replacements for hexavalent chromium coatings in aerospace applications. The proactive, collaborative approach used by TEERM helps reduce the cost burden on any one team partner, reduces duplication of effort, and enhances the technical quality and overall applicability of the testing and analysis.

Advanced-to-Revolutionary Space Technology Options - The Responsibly Imaginable

NASA Technical Reports Server (NTRS)

Bushnell, Dennis M.

2013-01-01

Paper summarizes a spectrum of low TRL, high risk technologies and systems approaches which could massively change the cost and safety of space exploration/exploitation/industrialization. These technologies and approaches could be studied in a triage fashion, the method of evaluation wherein several prospective solutions are investigated in parallel to address the innate risk of each, with resources concentrated on the more successful as more is learned. Technology areas addressed include Fabrication, Materials, Energetics, Communications, Propulsion, Radiation Protection, ISRU and LEO access. Overall and conceptually it should be possible with serious research to enable human space exploration beyond LEO both safe and affordable with a design process having sizable positive margins. Revolutionary goals require, generally, revolutionary technologies. By far, Revolutionary Energetics is the most important, has the most leverage, of any advanced technology for space exploration applications.

Schedule Risks Due to Delays in Advanced Technology Development

NASA Technical Reports Server (NTRS)

Reeves, John D. Jr.; Kayat, Kamal A.; Lim, Evan

2008-01-01

This paper discusses a methodology and modeling capability that probabilistically evaluates the likelihood and impacts of delays in advanced technology development prior to the start of design, development, test, and evaluation (DDT&E) of complex space systems. The challenges of understanding and modeling advanced technology development considerations are first outlined, followed by a discussion of the problem in the context of lunar surface architecture analysis. The current and planned methodologies to address the problem are then presented along with sample analyses and results. The methodology discussed herein provides decision-makers a thorough understanding of the schedule impacts resulting from the inclusion of various enabling advanced technology assumptions within system design.

48 CFR 215.304 - Evaluation factors and significant subfactors.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of any information technology, whether acquired as a service or as a supply, consider the need for an evaluation factor regarding supply chain risk (see subpart 239.73). [71 FR 3414, Jan. 23, 2006, as amended at...

EVALUATION OF COLLIER COUNTY, FLORIDA LANDFILL MINING DEMONSTRATION

EPA Science Inventory

This report describes the landfill mining process as demonstrated under the U.S. EPA, Risk Reduction Engineering Laboratory's Municipal Waste Innovative Technology Evaluation (MITE) Program by the Collier County (Florida) Solid Waste Management Department. Landfill mining is the ...

EVALUATION OF THE COLLIER COUNTY, FLORIDA LANDFILL MINING DEMONSTRATION

EPA Science Inventory

This report describes the landfill mining process as demonstrated under the U.S. EPA, Risk Reduction Engineering Laboratory's Municipal Waste Innovative Technology Evaluation (MITE) Program by the Collier County (Florida) Solid Waste Management Department. Landfill mining is the ...

Agency perspectives on food safety for the products of animal biotechnology.

PubMed

Howard, H J; Jones, K M; Rudenko, L

2012-08-01

Animal biotechnology represents one subset of tools among a larger set of technologies for potential use to meet increasing world demands for food. Assisted reproductive technologies (ART) such as artificial insemination and embryo transfer continue to make positive contributions in food animal production. The US Food and Drug Administration (FDA) performed a comprehensive risk assessment to identify potential food consumption or animal health risks associated with animal cloning, an emerging ART. At that time, FDA concluded that animal cloning posed no unique risks either to animal health or to food consumption, and food from animal clones and their sexually reproduced offspring required no additional federal regulation beyond that applicable to conventionally bred animals of the species examined. At this time, no new information has arisen that would necessitate a change in FDA's conclusions on food from animal clones or their sexually reproduced offspring. Use of recombinant DNA technologies to produce genetically engineered (GE) animals represents another emerging technology with potential to impact food animal production. In its regulation of GE animals, FDA follows a cumulative, risk-based approach to address scientific questions related to the GE animals. FDA evaluates data and information on the safety, effectiveness and stability of the GE event. FDA carries out its review at several levels (e.g. molecular biology, animal safety, food safety, environmental safety and claim validation). GE animal sponsors provide data to address risk questions for each level. This manuscript discusses FDA's role in evaluation of animal cloning and GE animals. © 2012 Blackwell Verlag GmbH.

Risk as a Driver for Innovation

NASA Technical Reports Server (NTRS)

Davis, Jeff; Fogarty, Jennifer; Perchonok, Michele; Zapp, Neal; Ferebee, Melvin; Edwards, J. Michelle

2010-01-01

The Space Life Sciences directorate (SLSD) and Human Research Program (HRP) at NASA Johnson Space Center has implemented a system for managing human systems risks. These risks are defined as the health and performance risks posed to crew during and after spaceflight. Identification and evaluation of these risks has led to the identification of gaps in knowledge about the risks as well as gaps in technology needed to mitigate them. Traditional routes of closing technology gaps have, in some cases, proven to be too slow when a solution was required quickly. Therefore, certain gaps were used to drive the development of "challenges" for the scientific community. Partnering with open innovation service providers such as InnoCentive and Yet2.com, SLSD and HRP have decreased the amount of time from identification of a need to the evaluation of a solution. Although not all proposed solutions will result in a risk mitigation strategy or tool, the process has allowed faster evaluation of proposed solutions providing the researcher the ability to move to another possible solution if the first does not sufficiently address the problem. Moreover, this process engages the community outside of NASA and broadens the population from which to draw solutions. In the traditional grant funding structure, only those in the specific field will apply for the grant. However, using open innovation, solutions can come from individuals in many different fields. This can expand the general view of a field (way of thinking within a field) and the application of solutions form new fields while providing a pathway for the acquisition of novel solutions or refinements of current mitigations. Identification of the human systems risks has helped drive the development and evaluation of innovative solutions as well as engaging a broader scientific audience in working with NASA.

The Role of New Technologies to Foster Positive Youth Development

ERIC Educational Resources Information Center

Bers, Marina Umaschi

2006-01-01

This article describes a developmental systems approach to applied developmental science (ADS), which provides a framework to design and evaluate technology-rich programs that promote positive development by emphasizing the strengths and assets of young people instead of focusing on diminishing or preventing risk-taking behaviors. Until now, most…

Assisted reproductive technologies: medical safety issues in the older woman.

PubMed

Segev, Yakir; Riskin-Mashiah, Shlomit; Lavie, Ofer; Auslender, Ron

2011-06-01

Abstract Previous study has shown that in the United States, most maternal deaths and severe obstetric complications due to chronic disease are potentially preventable through improved medical care before conception. Many women who need assisted reproductive technology (ART) because of infertility are older than the average pregnant woman. Risks for such chronic diseases as obesity, diabetes mellitus, chronic hypertension, cardiovascular disease (CVD), and malignancy greatly increase with maternal age. Chronic illness increases the risk of the in vitro fertilization (IVF) procedure and is also associated with increased obstetric risk and even death. The objective of this review is to outline the potential risks for older women who undergo ART procedures and pregnancy and to characterize guidelines for evaluation before enrollment in ART programs. A PubMed search revealed that very few studies have related to pre-ART medical evaluation. Therefore, we suggest a pre-ART medical assessment, comparable to the recommendations of the American Heart Association before noncompetitive physical activity and the American Society of Anesthesiologists before elective surgery. This assessment should include a thorough medical questionnaire and medical examination. Further evaluation and treatment should follow to ensure the safety of ART procedures and of ensuing pregnancies.

Silent Aircraft Initiative Concept Risk Assessment

NASA Technical Reports Server (NTRS)

Nickol, Craig L.

2008-01-01

A risk assessment of the Silent Aircraft Initiative's SAX-40 concept design for extremely low noise has been performed. A NASA team developed a list of 27 risk items, and evaluated the level of risk for each item in terms of the likelihood that the risk would occur and the consequences of the occurrence. The following risk items were identified as high risk, meaning that the combination of likelihood and consequence put them into the top one-fourth of the risk matrix: structures and weight prediction; boundary-layer ingestion (BLI) and inlet design; variable-area exhaust and thrust vectoring; displaced-threshold and continuous descent approach (CDA) operational concepts; cost; human factors; and overall noise performance. Several advanced-technology baseline concepts were created to serve as a basis for comparison to the SAX-40 concept. These comparisons indicate that the SAX-40 would have significantly greater research, development, test, and engineering (RDT&E) and production costs than a conventional aircraft with similar technology levels. Therefore, the cost of obtaining the extremely low noise capability that has been estimated for the SAX-40 is significant. The SAX-40 concept design proved successful in focusing attention toward low noise technologies and in raising public awareness of the issue.

Public perceptions of the risks of an unfamiliar technology: The case of using nuclear energy sources for space missions

NASA Astrophysics Data System (ADS)

Maharik, Michael

This thesis addresses the public perception of the risk of a technology not widely known to laypeople. Its aims were (1) to characterize public perceptions of the risk of using nuclear energy in space and decisions related to this risk, and (2) to extend the 'mental model' methodology to studying public perception of unfamiliar, risky technologies. A model of the physical processes capable of creating risks from using nuclear energy sources in space was first constructed. Then, knowledge and beliefs related to this topic were elicited from three different groups of people. The generality of the findings was examined in a constructive replication with environmentally-oriented people. The possibility of involving the public in decision-making processes related to engineering macro-design was then investigated. Finally, a communication regarding these risk processes was developed and evaluated in an experiment comparing it with communications produced by NASA. Although they included large portions of the expert model, people's beliefs also had gaps and misconceptions. Respondents often used scientific terms without a clear understanding of what they meant. Respondents' mental models sometimes contained scattered and inconsistent entries. The impact of pre-existing mental models was clearly seen. Different groups of people had different patterns of knowledge and beliefs. Nevertheless, respondents expressed reasonable and coherent opinions on choices among engineering options. The CMU brochure, derived from the study of readers' existing mental models, provided a better risk communication tool than NASA's material, reflecting primarily experts' perspective. The better performance of subjects reading either brochure generally reflected adding knowledge on issues that they had not previously known, rather than correcting wrong beliefs. The communication study confirmed a hypothesis that improving knowledge on risk processes related to the use of a technology causes a more favorable attitude towards that technology. Recommendations related to the design and targeting of risk communication, and to public participation in decision-making on using new and risky technologies, are derived. Additional studies that will elicit laypeople's definitions of risk related to specific technologies, and link their detailed understanding of risk-development processes to the perceived dimensions of risk, are suggested.

Deciding to buy expensive technology. The case of biliary lithotripsy.

PubMed

Weingart, S N

1995-01-01

Acquiring expensive, new medical technology requires an evaluation of the efficacy and effectiveness, safety, profitability, feasibility, and risk of a project in the context of the hospital's social responsibility and institutional strategy. A case study of the decision to bring biliary lithotripsy to Strong Memorial Hospital illustrates how these criteria offer managers a coherent approach to difficult and consequential decisions about acquiring medical technology.

Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II - "Unexpected" effects on shoulder motion, balance, and spine loading.

PubMed

Kim, Sunwook; Nussbaum, Maury A; Mokhlespour Esfahani, Mohammad Iman; Alemi, Mohammad Mehdi; Jia, Bochen; Rashedi, Ehsan

2018-03-07

Adopting a new technology (exoskeletal vest designed to support overhead work) in the workplace can be challenging since the technology may pose unexpected safety and health consequences. A prototype exoskeletal vest was evaluated for potential unexpected consequences with a set of evaluation tests for: usability (especially, donning & doffing), shoulder range of motion (ROM), postural control, slip & trip risks, and spine loading during overhead work simulations. Donning/doffing the vest was easily done by a wearer alone. The vest reduced the max. shoulder abduction ROM by ∼10%, and increased the mean center of pressure velocity in the anteroposterior direction by ∼12%. However, vest use had minimal influences on trip-/slip-related fall risks during level walking, and significantly reduced spine loadings (up to ∼30%) especially during the drilling task. Use of an exoskeletal vest can be beneficial, yet the current evaluation tests should be expanded for more comprehensiveness, to enable the safe adoption of the technology. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of Sensor Technology to Detect Fall Risk and Prevent Falls in Acute Care.

PubMed

Potter, Patricia; Allen, Kelly; Costantinou, Eileen; Klinkenberg, William Dean; Malen, Jill; Norris, Traci; O'Connor, Elizabeth; Roney, Wilhemina; Tymkew, Heidi Hahn; Wolf, Laurie

2017-08-01

Sensor technology that dynamically identifies hospitalized patients' fall risk and detects and alerts nurses of high-risk patients' early exits out of bed has potential for reducing fall rates and preventing patient harm. During Phase 1 (August 2014-January 2015) of a previously reported performance improvement project, an innovative depth sensor was evaluated on two inpatient medical units to study fall characteristics. In Phase 2 (April 2015-January 2016), a combined depth and bed sensor system designed to assign patient fall probability, detect patient bed exits, and subsequently prevent falls was evaluated. Fall detection depth sensors remained in place on two medicine units; bed sensors used to detect patient bed exits were added on only one of the medicine units. Fall rates and fall with injury rates were evaluated on both units. During Phase 2, the designated evaluation unit had 14 falls, for a fall rate of 2.22 per 1,000 patient-days-a 54.1% reduction compared with the Phase 1 fall rate. The difference in rates from Phase 1 to Phase 2 was statistically significant (z = 2.20; p = 0.0297). The comparison medicine unit had 30 falls-a fall rate of 4.69 per 1,000 patient-days, representing a 57.9% increase as compared with Phase 1. A fall detection sensor system affords a level of surveillance that standard fall alert systems do not have. Fall prevention remains a complex issue, but sensor technology is a viable fall prevention option. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Trade Studies of Space Launch Architectures using Modular Probabilistic Risk Analysis

NASA Technical Reports Server (NTRS)

Mathias, Donovan L.; Go, Susie

2006-01-01

A top-down risk assessment in the early phases of space exploration architecture development can provide understanding and intuition of the potential risks associated with new designs and technologies. In this approach, risk analysts draw from their past experience and the heritage of similar existing systems as a source for reliability data. This top-down approach captures the complex interactions of the risk driving parts of the integrated system without requiring detailed knowledge of the parts themselves, which is often unavailable in the early design stages. Traditional probabilistic risk analysis (PRA) technologies, however, suffer several drawbacks that limit their timely application to complex technology development programs. The most restrictive of these is a dependence on static planning scenarios, expressed through fault and event trees. Fault trees incorporating comprehensive mission scenarios are routinely constructed for complex space systems, and several commercial software products are available for evaluating fault statistics. These static representations cannot capture the dynamic behavior of system failures without substantial modification of the initial tree. Consequently, the development of dynamic models using fault tree analysis has been an active area of research in recent years. This paper discusses the implementation and demonstration of dynamic, modular scenario modeling for integration of subsystem fault evaluation modules using the Space Architecture Failure Evaluation (SAFE) tool. SAFE is a C++ code that was originally developed to support NASA s Space Launch Initiative. It provides a flexible framework for system architecture definition and trade studies. SAFE supports extensible modeling of dynamic, time-dependent risk drivers of the system and functions at the level of fidelity for which design and failure data exists. The approach is scalable, allowing inclusion of additional information as detailed data becomes available. The tool performs a Monte Carlo analysis to provide statistical estimates. Example results of an architecture system reliability study are summarized for an exploration system concept using heritage data from liquid-fueled expendable Saturn V/Apollo launch vehicles.

A Rapid Monitoring and Evaluation Method of Schistosomiasis Based on Spatial Information Technology.

PubMed

Wang, Yong; Zhuang, Dafang

2015-12-12

Thanks to Spatial Information Technologies (SITs) such as Remote Sensing (RS) and Geographical Information System (GIS) that are being quickly developed and updated, SITs are being used more widely in the public health field. The use of SITs to study the characteristics of the temporal and spatial distribution of Schistosoma japonicum and to assess the risk of infection provides methods for the control and prevention of schistosomiasis japonica has gradually become a hot topic in the field. The purpose of the present paper was to use RS and GIS technology to develop an efficient method of prediction and assessment of the risk of schistosomiasis japonica. We choose the Yueyang region, close to the east DongTing Lake (Hunan Province, China), as the study area, where a recent serious outbreak of schistosomiasis japonica took place. We monitored and evaluated the transmission risk of schistosomiasis japonica in the region using SITs. Water distribution data were extracted from RS images. The ground temperature, ground humidity and vegetation index were calculated based on RS images. Additionally, the density of oncomelania snails, which are the Schistosoma japonicum intermediate host, was calculated on the base of RS data and field measurements. The spatial distribution of oncomelania snails was explored using SITs in order to estimate the area surrounding the residents with transmission risk of schistosomiasis japonica. Our research result demonstrated: (1) the risk factors for the transmission of schistosomiasis japonica were closely related to the living environment of oncomelania snails. Key factors such as water distribution, ground temperature, ground humidity and vegetation index can be quickly obtained and calculated from RS images; (2) using GIS technology and a RS deduction technique along with statistical regression models, the density distribution model of oncomelania snails could be quickly built; (3) using SITs and analysis with overlaying population distribution data, the range of transmission risk of schistosomiasis japonica of the study area can be quickly monitored and evaluated. This method will help support the decision making for the control and prevention of schistosomiasis and form a valuable application using SITs for the schistosomiasis research.

Simulation technology used for risky assessment in deep exploration project in China

NASA Astrophysics Data System (ADS)

jiao, J.; Huang, D.; Liu, J.

2013-12-01

Deep exploration has been carried out in China for five years in which various heavy duty instruments and equipments are employed for gravity, magnetic, seismic and electromagnetic data prospecting as well as ultra deep drilling rig established for obtaining deep samples, and so on. The deep exploration is a large and complex system engineering crossing multiple subjects with great investment. It is necessary to employ advanced technical means technology for verification, appraisal, and optimization of geographical prospecting equipment development. To reduce risk of the application and exploration, efficient and allegeable management concept and skills have to be enhanced in order to consolidate management measure and workflow to benefit the ambitious project. Therefore, evidence, prediction, evaluation and related decision strategies have to be taken into accouter simultaneously to meet practical scientific requests and technique limits and extendable attempts. Simulation technique is then proposed as a tool that can be used to carry out dynamic test on actual or imagined system. In practice, it is necessary to combine the simulation technique with the instruments and equipment to accomplish R&D tasks. In this paper, simulation technique is introduced into the R&D process of heavy-duty equipment and high-end engineering project technology. Based on the information provided by a drilling group recently, a digital model is constructed by combination of geographical data, 3d visualization, database management, and visual reality technologies together. It result in push ahead a R&D strategy, in which data processing , instrument application, expected result and uncertainty, and even operation workflow effect environment atmosphere are simulated systematically or simultaneously, in order to obtain an optimal consequence as well as equipment updating strategy. The simulation technology is able to adjust, verify, appraise and optimize the primary plan due to changing in the real world or process, which can provide new insight to the equipment to meet requests from application and construction process and facilitates by means of direct perception and understanding of installation, debugging and experimental process of key equipment for deep exploration. Finally, the objective of project cost conservation and risk reduction can be reasonably approached. Risk assessment can be used to quantitatively evaluate the possible degree of the impact. During the research and development stage, information from the installation, debugging and simulation demonstration of the experiment process of the key instrument and equipment are used to evaluate the fatigue and safety of the device. It needs fully understanding the controllable and uncontrollable risk factors during the process, and then adjusting and improving the unsafe risk factors in the risk assessment and prediction. With combination with professional Geo software to process and interpret the environment to obtain evaluation parameters, simulation modeling is more likely close to exploration target which need more details of evaluations. From micro and macro comprehensive angles to safety and risk assessment can be achieved to satisfy the purpose of reducing the risk of equipment development, and to avoid unnecessary loss on the way of the development.

Risk assessment of technologies for detecting illicit drugs in containers

NASA Astrophysics Data System (ADS)

Brandenstein, Albert E.

1995-03-01

This paper provides the highlights of the role risk assessment plays in the United States technology program for nonintrusive inspection of cargo containers for illicit drugs. The Counterdrug Technology Assessment Center is coordinating the national effort to develop prototype technologies for an advanced generation, nonintrusive cargo inspection system. In the future, the U.S. Customs Service could configure advanced technologies for finding not only drugs and other contraband hidden in cargo, but for a wide variety of commodities for customs duty verification purposes. The overall nonintrusive inspection system is envisioned to consist primarily of two classes of subsystems: (1) shipment document examination subsystems to prescreen exporter and importer documents; and (2) chemical and physics-based subsystems to detect and characterize illicit substances. The document examination subsystems would use software algorithms, artificial intelligence, and neural net technology to perform an initial prescreening of the information on the shipping manifest for suspicious patterns. This would be accomplished by creating a `profile' from the shipping information and matching it to trends known to be used by traffickers. The chemical and physics-based subsystems would apply nuclear physics, x-ray, gas chromatography and spectrometry technologies to locate and identify contraband in containers and other conveyances without the need for manual searches. The approach taken includes using technology testbeds to assist in evaluating technology prototypes and testing system concepts in a fully instrumented but realistic operational environment. This approach coupled with a substance signature phenomenology program to characterize those detectable elements of benign, as well as target substances lends itself particularly well to the topics of risk assessment and elemental characterization of substances. A technology testbed established in Tacoma, Washington provides a national facility for testing and evaluating existing and emerging prototype systems in an operational environment. The results of initial tests using the advanced x-ray subsystem installed at the testbed are given in this paper. A description of typical cargo contents and those characteristics applicable to nuclear interrogation techniques are provided in the appendix.

Health Information Technology Risks, Errors, External Threats, and Human Complacency.

PubMed

Felkey, Bill G; Fox, Brent I

2015-06-01

It may seem that our position is one of unwavering support for all things health information technology (HIT). However, we like to believe that we are cautious and deliberate in our evaluation of HIT. This month, we explore some of the common overt and covert challenges to optimal use of HIT.

Mobile Health Technology Interventions for Suicide Prevention: Protocol for a Systematic Review and Meta-Analysis.

PubMed

Melia, Ruth; Francis, Kady; Duggan, Jim; Bogue, John; O'Sullivan, Mary; Chambers, Derek; Young, Karen

2018-01-26

Previous research has reported that two of the major barriers to help-seeking for individuals at risk of suicide are stigma and geographical isolation. Mobile technology offers a potential means of delivering evidence-based interventions with greater specificity to the individual, and at the time that it is needed. Despite documented motivation by at-risk individuals to use mobile technology to track mental health and to support psychological interventions, there is a shortfall of outcomes data on the efficacy of mobile health (mHealth) technology on suicide-specific outcomes. The objective of this study is to develop a protocol for a systematic review and meta-analysis that aims to evaluate the effectiveness of mobile technology-based interventions for suicide prevention. The search includes the Cochrane Central Register of Controlled Trials (CENTRAL: The Cochrane Library), MEDLINE, Embase, PsycINFO, CRESP and relevant sources of gray literature. Studies that have evaluated psychological or nonpsychological interventions delivered via mobile computing and communication technology, and have suicidality as an outcome measure will be included. Two authors will independently extract data and assess the study suitability in accordance with the Cochrane Collaboration Risk of Bias Tool. Studies will be included if they measure at least one suicide outcome variable (ie, suicidal ideation, suicidal intent, nonsuicidal self-injurious behavior, suicidal behavior). Secondary outcomes will be measures of symptoms of depression. Where studies are sufficiently homogenous and reported outcomes are amenable for pooled synthesis, meta-analysis will be performed. A narrative synthesis will be conducted if the data is unsuitable for a meta-analysis. The review is in progress, with findings expected by summer 2018. To date, evaluations of mobile technology-based interventions in suicide prevention have focused on evaluating content as opposed to efficacy. Indeed, previous research has identified mobile applications that appear to present harmful content. The current review will address a gap in the literature by evaluating the efficacy of stand-alone mobile technology tools in suicide prevention. It is imperative that research identifies the evidence base for such tools in suicide prevention in order to inform policy, guide clinical practice, inform users and focus future research. PROSPERO International Prospective Register of Systematic Reviews CRD42017072899; https:// www.crd.york.ac.uk/prospero/display_record.asp?ID=CRD42017072899  (Archived by WebCite at http://www.webcitation.org/ 6tZAj0yqJ). ©Ruth Melia, Kady Francis, Jim Duggan, John Bogue, Mary O'Sullivan, Derek Chambers, Karen Young. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 26.01.2018.

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian; Paxton, Joseph

2010-01-01

This paper will present a Supply Chain Readiness Level (SCRL) model that can be used to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. It will also show that using SCRL in conjunction with Technology Readiness Levels (TRLs), Manufacturing Readiness Levels (MRLs) and National Aeronautics Space Administrations (NASA s) Project Lifecycle Process will provide a more complete means of developing and evaluating a robust sustainable supply chain that encompasses the entire product, system and mission lifecycle. In addition, it will be shown that by implementing the SCRL model, NASA can additionally define supplier requirements to enable effective supply chain management (SCM). Developing and evaluating overall supply chain readiness for any product, system and mission lifecycle is critical for mission success. Readiness levels are presently being used to evaluate the maturity of technology and manufacturing capability during development and deployment phases of products and systems. For example, TRLs are used to support the assessment of the maturity of a particular technology and compare maturity of different types of technologies. MRLs are designed to assess the maturity and risk of a given technology from a manufacturing perspective. In addition, when these measurement systems are used collectively they can offer a more comprehensive view of the maturity of the system. While some aspects of the supply chain and supply chain planning are considered in these familiar metric systems, certain characteristics of an effective supply chain, when evaluated in more detail, will provide an improved insight into the readiness and risk throughout the supply chain. Therefore, a system that concentrates particularly on supply chain attributes is required to better assess enterprise supply chain readiness.

Risk of adverse pregnancy and perinatal outcomes after high technology infertility treatment: a comprehensive systematic review.

PubMed

Palomba, Stefano; Homburg, Roy; Santagni, Susanna; La Sala, Giovanni Battista; Orvieto, Raoul

2016-11-04

In the literature, there is growing evidence that subfertile patients who conceived after infertility treatments have an increased risk of pregnancy and perinatal complications and this is particularly true for patients who conceived through use of high technology infertility treatments. Moreover, high technology infertility treatments include many concomitant clinical and biological risk factors. This review aims to summarize in a systematic fashion the current evidence regarding the relative effect of the different procedures for high technology infertility treatments on the risk of adverse pregnancy and perinatal outcome. A literature search up to August 2016 was performed in IBSS, SocINDEX, Institute for Scientific Information, PubMed, Web of Science and Google Scholar and an evidence-based hierarchy was used to determine which articles to include and analyze. Data on prepregnancy maternal factors, low technology interventions, specific procedures for male factor, ovarian tissue/ovary and uterus transplantation, and chromosomal abnormalities and malformations of the offspring were excluded. The available evidences were analyzed assessing the level and the quality of evidence according to the Oxford Centre for Evidence-Based Medicine guidelines and the Grading of Recommendations Assessment, Development, and Evaluation system, respectively. Current review highlights that every single procedure of high technology infertility treatments can play a crucial role in increasing the risk of pregnancy and perinatal complications. Due to the suboptimal level and quality of the current evidence, further well-designed studies are needed.

Women, health, and technology.

PubMed

Stauning, I

1993-01-01

Some factors that determine the development and diffusion of medical technologies are discussed. The use of technology in pregnancy and labor cannot be seen as a response to user needs or the result of societal planning alone. Often technologies are developed and diffused without any evaluation of their risks and benefits. The relations between medical research and industrial interests are focused on to explain the development, and against this background user interests and women's strategies as users and providers of health care are discussed.

QuEST: Qualifying Environmentally Sustainable Technologies. Vol. 3

NASA Technical Reports Server (NTRS)

Lewis, Pattie (Editor)

2008-01-01

This is an exciting new chapter for the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). The Principal Center's past successes have created new opportunities for partnership and technology implementation. TEERM is continuing to support the current NASA Programs while reaching out and offering our assistance and experience to Constellation. NASA has also assumed Chairmanship responsibility of the Joint Group on Pollution Prevention (JG-PP) and Chairmanship of the JG-PP Working Group (WG). Both JG-PP and TEERM strive to improve mission readiness and reduce risk to personnel and assets by solving joint problems through cooperation. JG-PP and TEERM not only show our commitment to environmental stewardship, but also our commitment to fiscal responsibility.

Clinical Simulation: A Protocol for Evaluation of Mobile Technology.

PubMed

Mather, Carey; Jensen, Sanne; Cummings, Elizabeth

2017-01-01

For mobile technology to be accepted at point of care in healthcare environments there is a need to demonstrate benefits whilst ameliorating the risks and challenges. To provide a standardised approach to evaluation of mobile technology a simulation protocol was developed to provide guidance for its use in healthcare environments. Simulated conditions provide the opportunity to assess intended and unintended consequences and identify potential workarounds when using technology. The protocol can also be used to demonstrate the importance of the development of digital professionalism by end-users prior to students entering the clinical practice setting. The mobile technology protocol was adapted from a health information systems protocol developed and used at the ITX Lab, Denmark for use in other simulation laboratories. Use case scenarios were developed to enable evaluation of mobile technology for mobile learning of nurses, nurse supervisors, students and patients. The scenarios can be used in a range of simulated environments including hospital bedside, outpatient clinic or community settings. A case study exemplar of a nurse and patient is included to demonstrate how the mobile technology protocol can be applied.

Leveraging Technology to Improve Developmental Mathematics Course Completion: Evaluation of a Large-Scale Intervention

ERIC Educational Resources Information Center

Wladis, Claire; Offenholley, Kathleen; George, Michael

2014-01-01

This study hypothesizes that course passing rates in remedial mathematics classes can be improved through early identification of at-risk students using a department-wide midterm, followed by a mandated set of online intervention assignments incorporating immediate and elaborate feedback for all students identified as "at-risk" by their…

Construction risk assessment of deep foundation pit in metro station based on G-COWA method

NASA Astrophysics Data System (ADS)

You, Weibao; Wang, Jianbo; Zhang, Wei; Liu, Fangmeng; Yang, Diying

2018-05-01

In order to get an accurate understanding of the construction safety of deep foundation pit in metro station and reduce the probability and loss of risk occurrence, a risk assessment method based on G-COWA is proposed. Firstly, relying on the specific engineering examples and the construction characteristics of deep foundation pit, an evaluation index system based on the five factors of “human, management, technology, material and environment” is established. Secondly, the C-OWA operator is introduced to realize the evaluation index empowerment and weaken the negative influence of expert subjective preference. The gray cluster analysis and fuzzy comprehensive evaluation method are combined to construct the construction risk assessment model of deep foundation pit, which can effectively solve the uncertainties. Finally, the model is applied to the actual project of deep foundation pit of Qingdao Metro North Station, determine its construction risk rating is “medium”, evaluate the model is feasible and reasonable. And then corresponding control measures are put forward and useful reference are provided.

An evaluation of nursing tasks.

PubMed

Baptiste, Andrea

2011-01-01

Functional capacity evaluations have been criticized as being too general in theory and not being accurate enough to determine what tasks an employee can perform. This paper will describe results of a descriptive study that was conducted in a laboratory setting to objectively determine the physical demands of patient transfer tasks performed by nurses. Fifty three tasks were analyzed and broken down into sub-tasks to quantify the peak force required to perform each sub-task in order to determine which tasks pose healthcare workers at highest risk of injury. Dissecting the transfer task into segments allows us to see which part of the task requires high forces on the part of the caregiver. The task can then be modified to eliminate the risk of injury to the caregiver. This modification can be accomplished by using healthcare technology, such as floor based or overhead lifts, friction reducing devices, sit to stand lifts, properly designed slings, and motorized beds/trolleys. Technological solutions are available for some of these high risk tasks and should be implemented where applicable to reduce the force demand and eliminate or reduce the risk of injury to healthcare workers in nursing.

Transcatheter aortic valve replacement in patients with severe aortic stenosis who are at high risk for surgical complications: summary assessment of the California Technology Assessment Forum.

PubMed

Tice, Jeffrey A; Sellke, Frank W; Schaff, Hartzell V

2014-08-01

The California Technology Assessment Forum is dedicated to assessment and public reporting of syntheses of available data on medical technologies. In this assessment, transcatheter aortic valve replacement (TAVR) was evaluated for patients with severe aortic stenosis (AS) who are at high risk for complications. In this assessment, 5 criteria were used: Regulatory approval, sufficient scientific evidence to allow conclusions on effectiveness, evidence that the technology improves net health outcomes, evidence that the technology is as beneficial as established methods, and availability of the technology outside investigational settings. In this assessment, all 5 criteria were judged to have been met. The primary benefit of TAVR is the ability to treat AS in patients who would otherwise be ineligible for surgical aortic valve replacement. It may also be useful for patients at high surgical risk by potentially reducing periprocedural complications and avoiding the morbidity and recovery from undergoing heart surgery. Potential harms include the need for conversion to an open procedure, perioperative death, myocardial infarction, stroke, bleeding, valve embolization, aortic regurgitation, heart block that requires a permanent pacemaker, renal failure, pulmonary failure, and major vascular complications such as cardiac perforation or arterial dissection. Potential long-term harms include death, stroke, valve failure or clotting, and endocarditis. As highlighted at the February 2012 California Technology Assessment Forum meeting, the dispersion of this technology to new centers across the United States must proceed with careful thought given to training and proctoring multidisciplinary teams to become new centers of excellence. TAVR is a potentially lifesaving procedure that may improve quality of life for patients at high risk for surgical AVR. However, attention needs to be paid to appropriate patient selection, their preoperative evaluation, surgical techniques, and postoperative care to preserve and improve on the results attained in the Placement of Aortic Transcatheter Valve trial. Specialty societies are collaborating to ensure that this happens in a rational and comprehensive manner. Copyright © 2014 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Final ACT configuration evaluation

NASA Technical Reports Server (NTRS)

1982-01-01

The Final ACT Configuration Evaluation Task of the Integrated Application of Active Controls (IAAC) technology project within the energy efficient transport program is summarized. The Final ACT Configuration, through application of Active Controls Technology (ACT) in combination with increased wing span, exhibits significant performance improvements over the conventional baseline configuration. At the design range for these configurations, 3590 km, the block fuel used is 10% less for the Final ACT Configuration, with significant reductions in fuel usage at all operational ranges. Results of this improved fuel usage and additional system and airframe costs and the complexity required to achieve it were analyzed to determine its economic effects. For a 926 km mission, the incremental return on investment is nearly 25% at 1980 fuel prices. For longer range missions or increased fuel prices, the return is greater. The technical risks encountered in the Final ACT Configuration design and the research and development effort required to reduce these risks to levels acceptable for commercial airplane design are identified.

Towards a practical framework for managing the risks of selecting technology to support independent living.

PubMed

Monk, Andrew; Hone, Kate; Lines, Lorna; Dowdall, Alan; Baxter, Gordon; Blythe, Mark; Wright, Peter

2006-09-01

Information and communication technology applications can help increase the independence and quality of life of older people, or people with disabilities who live in their own homes. A risk management framework is proposed to assist in selecting applications that match the needs and wishes of particular individuals. Risk comprises two components: the likelihood of the occurrence of harm and the consequences of that harm. In the home, the social and psychological harms are as important as the physical ones. The importance of the harm (e.g., injury) is conditioned by its consequences (e.g., distress, costly medical treatment). We identify six generic types of harm (including dependency, loneliness, fear and debt) and four generic consequences (including distress and loss of confidence in ability to live independently). The resultant client-centred framework offers a systematic basis for selecting and evaluating technology for independent living.

Cost/benefit analysis of advanced materials technology candidates for the 1980's, part 2

NASA Technical Reports Server (NTRS)

Dennis, R. E.; Maertins, H. F.

1980-01-01

Cost/benefit analyses to evaluate advanced material technologies projects considered for general aviation and turboprop commuter aircraft through estimated life-cycle costs, direct operating costs, and development costs are discussed. Specifically addressed is the selection of technologies to be evaluated; development of property goals; assessment of candidate technologies on typical engines and aircraft; sensitivity analysis of the changes in property goals on performance and economics, cost, and risk analysis for each technology; and ranking of each technology by relative value. The cost/benefit analysis was applied to a domestic, nonrevenue producing, business-type jet aircraft configured with two TFE731-3 turbofan engines, and to a domestic, nonrevenue producing, business type turboprop aircraft configured with two TPE331-10 turboprop engines. In addition, a cost/benefit analysis was applied to a commercial turboprop aircraft configured with a growth version of the TPE331-10.

Promoting the safe and strategic use of technology for victims of intimate partner violence: evaluation of the technology safety project.

PubMed

Finn, Jerry; Atkinson, Teresa

2009-11-01

The Technology Safety Project of the Washington State Coalition Against Domestic Violence was designed to increase awareness and knowledge of technology safety issues for domestic violence victims, survivors, and advocacy staff. The project used a "train-the-trainer" model and provided computer and Internet resources to domestic violence service providers to (a) increase safe computer and Internet access for domestic violence survivors in Washington, (b) reduce the risk posed by abusers by educating survivors about technology safety and privacy, and (c) increase the ability of survivors to help themselves and their children through information technology. Evaluation of the project suggests that the program is needed, useful, and effective. Consumer satisfaction was high, and there was perceived improvement in computer confidence and knowledge of computer safety. Areas for future program development and further research are discussed.

Converging technologies: a critical analysis of cognitive enhancement for public policy application.

PubMed

Makridis, Christos

2013-09-01

This paper investigates cognitive enhancement, specifically biological cognitive enhancement (BCE), as a converging technology, and its implications for public policy. With an increasing rate of technological advancements, the legal, social, and economic frameworks lag behind the scientific advancements that they support. This lag poses significant challenges for policymakers if it is not dealt with sufficiently within the right analytical context. Therefore, the driving question behind this paper is, "What contingencies inform the advancement of biological cognitive enhancement, and what would society look like under this set of assumptions?" The paper is divided into five components: (1) defining the current policy context for BCEs, (2) analyzing the current social and economic outcomes to BCEs, (3) investigating the context of cost-benefit arguments in relation to BCEs, (4) proposing an analytical model for evaluating contingencies for BCE development, and (5) evaluating a simulated policy, social, technological, and economic context given the contingencies. In order to manage the risk and uncertainty inherent in technological change, BCEs' drivers must be scrutinized and evaluated.

An early warning system for groundwater pollution based on the assessment of groundwater pollution risks.

NASA Astrophysics Data System (ADS)

Zhang, Weihong.; Zhao, Yongsheng; Hong, Mei; Guo, Xiaodong

2009-04-01

Groundwater pollution usually is complex and concealed, remediation of which is difficult, high cost, time-consuming, and ineffective. An early warning system for groundwater pollution is needed that detects groundwater quality problems and gets the information necessary to make sound decisions before massive groundwater quality degradation occurs. Groundwater pollution early warning were performed by considering comprehensively the current groundwater quality, groundwater quality varying trend and groundwater pollution risk . The map of the basic quality of the groundwater was obtained by fuzzy comprehensive evaluation or BP neural network evaluation. Based on multi-annual groundwater monitoring datasets, Water quality state in sometime of the future was forecasted using time-sequenced analyzing methods. Water quality varying trend was analyzed by Spearman's rank correlative coefficient.The relative risk map of groundwater pollution was estimated through a procedure that identifies, cell by cell,the values of three factors, that is inherent vulnerability, load risk of pollution source and contamination hazard. DRASTIC method was used to assess inherent vulnerability of aquifer. Load risk of pollution source was analyzed based on the potential of contamination and pollution degree. Assessment index of load risk of pollution source which involves the variety of pollution source, quantity of contaminants, releasing potential of pollutants, and distance were determined. The load risks of all sources considered by GIS overlay technology. Early warning model of groundwater pollution combined with ComGIS technology organically, the regional groundwater pollution early-warning information system was developed, and applied it into Qiqiha'er groundwater early warning. It can be used to evaluate current water quality, to forecast water quality changing trend, and to analyze space-time influencing range of groundwater quality by natural process and human activities. Keywords: groundwater pollution, early warning, aquifer vulnerability, pollution load, pollution risk, ComGIS

Personnel reliability impact on petrochemical facilities monitoring system's failure skipping probability

NASA Astrophysics Data System (ADS)

Kostyukov, V. N.; Naumenko, A. P.

2017-08-01

The paper dwells upon urgent issues of evaluating impact of actions conducted by complex technological systems operators on their safe operation considering application of condition monitoring systems for elements and sub-systems of petrochemical production facilities. The main task for the research is to distinguish factors and criteria of monitoring system properties description, which would allow to evaluate impact of errors made by personnel on operation of real-time condition monitoring and diagnostic systems for machinery of petrochemical facilities, and find and objective criteria for monitoring system class, considering a human factor. On the basis of real-time condition monitoring concepts of sudden failure skipping risk, static and dynamic error, monitoring systems, one may solve a task of evaluation of impact that personnel's qualification has on monitoring system operation in terms of error in personnel or operators' actions while receiving information from monitoring systems and operating a technological system. Operator is considered as a part of the technological system. Although, personnel's behavior is usually a combination of the following parameters: input signal - information perceiving, reaction - decision making, response - decision implementing. Based on several researches on behavior of nuclear powers station operators in USA, Italy and other countries, as well as on researches conducted by Russian scientists, required data on operator's reliability were selected for analysis of operator's behavior at technological facilities diagnostics and monitoring systems. The calculations revealed that for the monitoring system selected as an example, the failure skipping risk for the set values of static (less than 0.01) and dynamic (less than 0.001) errors considering all related factors of data on reliability of information perception, decision-making, and reaction fulfilled is 0.037, in case when all the facilities and error probability are under control - not more than 0.027. In case when only pump and compressor units are under control, the failure skipping risk is not more than 0.022, when the probability of error in operator's action is not more than 0.011. The work output shows that on the basis of the researches results an assessment of operators' reliability can be made in terms of almost any kind of production, but considering only technological capabilities, since operators' psychological and general training considerable vary in different production industries. Using latest technologies of engineering psychology and design of data support systems, situation assessment systems, decision-making and responding system, as well as achievement in condition monitoring in various production industries one can evaluate hazardous condition skipping risk probability considering static, dynamic errors and human factor.

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

1997-12-01

Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite mission concepts.

On determining specifications and selections of alternative technologies for airport checked-baggage security screening.

PubMed

Feng, Qianmei

2007-10-01

Federal law mandates that every checked bag at all commercial airports be screened by explosive detection systems (EDS), explosive trace detection systems (ETD), or alternative technologies. These technologies serve as critical components of airport security systems that strive to reduce security risks at both national and global levels. To improve the operational efficiency and airport security, emerging image-based technologies have been developed, such as dual-energy X-ray (DX), backscatter X-ray (BX), and multiview tomography (MVT). These technologies differ widely in purchasing cost, maintenance cost, operating cost, processing rate, and accuracy. Based on a mathematical framework that takes into account all these factors, this article investigates two critical issues for operating screening devices: setting specifications for continuous security responses by different technologies; and selecting technology or combination of technologies for efficient 100% baggage screening. For continuous security responses, specifications or thresholds are used for classifying threat items from nonthreat items. By investigating the setting of specifications on system security responses, this article assesses the risk and cost effectiveness of various technologies for both single-device and two-device systems. The findings provide the best selection of image-based technologies for both single-device and two-device systems. Our study suggests that two-device systems outperform single-device systems in terms of both cost effectiveness and accuracy. The model can be readily extended to evaluate risk and cost effectiveness of multiple-device systems for airport checked-baggage security screening.

Trials of Intervention Principles: Evaluation Methods for Evolving Behavioral Intervention Technologies

PubMed Central

Schueller, Stephen M; Riley, William T; Brown, C Hendricks; Cuijpers, Pim; Duan, Naihua; Kwasny, Mary J; Stiles-Shields, Colleen; Cheung, Ken

2015-01-01

In recent years, there has been increasing discussion of the limitations of traditional randomized controlled trial (RCT) methodologies for the evaluation of eHealth and mHealth interventions, and in particular, the requirement that these interventions be locked down during evaluation. Locking down these interventions locks in defects and eliminates the opportunities for quality improvement and adaptation to the changing technological environment, often leading to validation of tools that are outdated by the time that trial results are published. Furthermore, because behavioral intervention technologies change frequently during real-world deployment, even if a tested intervention were deployed in the real world, its shelf life would be limited. We argue that RCTs will have greater scientific and public health value if they focus on the evaluation of intervention principles (rather than a specific locked-down version of the intervention), allowing for ongoing quality improvement modifications to the behavioral intervention technology based on the core intervention principles, while continuously improving the functionality and maintaining technological currency. This paper is an initial proposal of a framework and methodology for the conduct of trials of intervention principles (TIPs) aimed at minimizing the risks of in-trial changes to intervention technologies and maximizing the potential for knowledge acquisition. The focus on evaluation of intervention principles using clinical and usage outcomes has the potential to provide more generalizable and durable information than trials focused on a single intervention technology. PMID:26155878

Trials of Intervention Principles: Evaluation Methods for Evolving Behavioral Intervention Technologies.

PubMed

Mohr, David C; Schueller, Stephen M; Riley, William T; Brown, C Hendricks; Cuijpers, Pim; Duan, Naihua; Kwasny, Mary J; Stiles-Shields, Colleen; Cheung, Ken

2015-07-08

In recent years, there has been increasing discussion of the limitations of traditional randomized controlled trial (RCT) methodologies for the evaluation of eHealth and mHealth interventions, and in particular, the requirement that these interventions be locked down during evaluation. Locking down these interventions locks in defects and eliminates the opportunities for quality improvement and adaptation to the changing technological environment, often leading to validation of tools that are outdated by the time that trial results are published. Furthermore, because behavioral intervention technologies change frequently during real-world deployment, even if a tested intervention were deployed in the real world, its shelf life would be limited. We argue that RCTs will have greater scientific and public health value if they focus on the evaluation of intervention principles (rather than a specific locked-down version of the intervention), allowing for ongoing quality improvement modifications to the behavioral intervention technology based on the core intervention principles, while continuously improving the functionality and maintaining technological currency. This paper is an initial proposal of a framework and methodology for the conduct of trials of intervention principles (TIPs) aimed at minimizing the risks of in-trial changes to intervention technologies and maximizing the potential for knowledge acquisition. The focus on evaluation of intervention principles using clinical and usage outcomes has the potential to provide more generalizable and durable information than trials focused on a single intervention technology.

Reading between the Lines: Implicit Assessment of the Association of Parental Attributions and Empathy with Abuse Risk

ERIC Educational Resources Information Center

Rodriguez, Christina M.; Cook, Anne E.; Jedrziewski, Chezlie T.

2012-01-01

Objective: Researchers in the child maltreatment field have traditionally relied on explicit self-reports to study factors that may exacerbate physical child abuse risk. The current investigation evaluated an implicit analog task utilizing eye tracking technology to assess both parental attributions of child misbehavior and empathy. Method: Based…

Hyper-X Stage Separation: Simulation Development and Results

NASA Technical Reports Server (NTRS)

Reubush, David E.; Martin, John G.; Robinson, Jeffrey S.; Bose, David M.; Strovers, Brian K.

2001-01-01

This paper provides an overview of stage separation simulation development and results for NASA's Hyper-X program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an account of the development of the current 14 degree of freedom stage separation simulation tool (SepSim) and results from use of the tool in a Monte Carlo analysis to evaluate the risk of failure for the separation event. Results from use of the tool show that there is only a very small risk of failure in the separation event.

Chemical and biological sensing needs for health effects studies

NASA Astrophysics Data System (ADS)

Breysse, Patrick N.

2012-06-01

Exposure assessment is an integral component of occupational and environmental epidemiology, risk assessment and management, as well as regulatory compliance. For the most part, air sampling and analysis tools used in occupational and environmental exposure assessments are based on technologies that have changed little since the 1970s. In many cases the lack of simple, inexpensive, exposure assessment technologies has limited epidemiologists' and risk assessors' ability to evaluate the environmental and occupational causes of disease. While there have been tremendous investments and advances in medical diagnostic and biomonitoring technologies (e.g., glucose testing, human genetics), there has been less effort invested in advancing the science of exposure assessment. Recent developments in sensor technology have focused on medical and homeland security applications. Developing and applying new sensors to health effects studies can revolutionize the way epidemiologic studies are conducted. Time-series studies that investigate short-term (hours to days) changes in exposure that are linked to changes in health care encounters, symptoms, and biological markers of preclinical disease and/or susceptibility are needed to more fully evaluate the impact of chemicals and other agents on health. Current sampling technology limits our ability to assess time-varying concentrations. The purpose of this paper is to discuss the current state of air sampling and health assessment and the potential application of novel sensor technology for use in health effects studies.

Evolving provider payment models and patient access to innovative medical technology.

PubMed

Long, Genia; Mortimer, Richard; Sanzenbacher, Geoffrey

2014-12-01

Abstract Objective: To investigate the evolving use and expected impact of pay-for-performance (P4P) and risk-based provider reimbursement on patient access to innovative medical technology. Structured interviews with leading private payers representing over 110 million commercially-insured lives exploring current and planned use of P4P provider payment models, evidence requirements for technology assessment and new technology coverage, and the evolving relationship between the two topics. Respondents reported rapid increases in the use of P4P and risk-sharing programs, with roughly half of commercial lives affected 3 years ago, just under two-thirds today, and an expected three-quarters in 3 years. All reported well-established systems for evaluating new technology coverage. Five of nine reported becoming more selective in the past 3 years in approving new technologies; four anticipated that in the next 3 years there will be a higher evidence requirement for new technology access. Similarly, four expected it will become more difficult for clinically appropriate but costly technologies to gain coverage. All reported planning to rely more on these types of provider payment incentives to control costs, but didn't see them as a substitute for payer technology reviews and coverage limitations; they each have a role to play. Interviews limited to nine leading payers with models in place; self-reported data. Likely implications include a more uncertain payment environment for providers, and indirectly for innovative medical technology and future investment, greater reliance on quality and financial metrics, and increased evidence requirements for favorable coverage and utilization decisions. Increasing provider financial risk may challenge the traditional technology adoption paradigm, where payers assumed a 'gatekeeping' role and providers a countervailing patient advocacy role with regard to access to new technology. Increased provider financial risk may result in an additional hurdle to the adoption of new technology, rather than substitution of provider- for payer-based gatekeeping.

Decision support in addiction: The development of an e-health tool to assess and prevent risk of fatal overdose. The ORION Project.

PubMed

Baldacchino, A; Crocamo, C; Humphris, G; Neufeind, J; Frisher, M; Scherbaum, N; Carrà, G

2016-09-01

The application of e-health technology to the field of substance use disorders is at a relatively early stage, and methodological quality is still variable. Few have explored the extent of utilization of communication technology in exploring risk perception by patients enrolled in substance abuse services. The Overdose RIsk InfOrmatioN (ORION) project is a European Commission funded programme, aimed to develop and pilot an e-health psycho-educational tool to provide information to drug using individuals about the risks of suffering a drug overdose. In this article, we report on phase 1 (risk estimation), phase 2 (design), and phase 3 (feasibility) of the ORION project. The development of ORION e-health tool underlined the importance of an evidence-based intervention aimed in obtaining reliable evaluation of risk. The ORION tool supported a decision making process aimed at influencing the substance users' self-efficacy and the degree to which the substance users' understand risk factors. Therefore, its innovative power consisted in translating risks combination into a clear estimation for the user who will then appear more likely to be interested in his/her risk perception. Exploratory field testing and validation confirmed the next stage of evaluation, namely, collection of routine patient samples in study clinics. The associations between risk perception of overdose, engagement with the ORION tool and willingness to alter overdose risk factors, in a clinical setting across various EU member states will further confirm the ORION tool's generalisability and effectiveness. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Evaluation of Ignition and Burn Risk Associated with Contemporary Fiberoptic and Distal Sensor Endoscopic Technology.

PubMed

Spradling, Kyle; Uribe, Brittany; Okhunov, Zhamshid; Hofmann, Martin; Del Junco, Michael; Hwang, Christina; Gruber, Caden; Youssef, Ramy F; Landman, Jaime

2015-09-01

To evaluate the ignition and burn risk associated with contemporary fiberoptic and distal sensor endoscopic technologies. We used new and used SCB Xenon 300 light sources to illuminate a 4.8 mm fiberoptic cable, 10 mm laparoscope, 5 mm laparoscope, rigid cystoscope, semirigid ureteroscope, flexible cystoscope, flexible fiberoptic ureteroscope, distal sensor cystoscope, and a distal sensor ureteroscope (Karl Storz, Inc., Tuttlingen, Germany). We measured peak temperatures at the distal end of each device. We then evaluated each device on a flat and folded surgical drape to establish ignition risk. Finally, we evaluated the effects of all devices on human cadaver skin covered by surgical drape. Peak temperatures recorded for each device ranged from 26.9°C (flexible fiberoptic ureteroscope) to 194.5°C (fiberoptic cable). Drape ignition was noted when the fiberoptic cable was placed against a fold of drape. Contact with the fiberoptic cable, 10 mm laparoscope, 5 mm laparoscope, and distal sensor cystoscope resulted in cadaver skin damage. Cadaver skin damage occurred despite little or no visible change to the surgical drape. Rigid and flexible fiberoptic cystoscopes and flexible fiberoptic ureteroscopes had no effect on surgical drapes or cadaver skin. Fiberoptic light cables and some endoscopic devices have the potential to cause thermal injury and drape ignition. Thermal injury may occur without visible damage to drapes. Surgeons should remain vigilant regarding the risks associated with these devices and take necessary safety precautions to prevent patient injury.

Remedial Action Assessment System: A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M.K.; Buelt, J.L.; Stottlemyre, J.A.

1991-02-01

Because of the complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process. The Remedial Action Assessment System (RAAS), can be used for screening, linking, and evaluating established technology processes in support of conducting feasibility studies. It is also intended to do the same in support of corrective measures studies. The user interface employs menus, windows, help features, and graphical information while RAAS is in operation. Object-oriented programming is used to link unit processes into sets ofmore » compatible processes that form appropriate remedial alternatives. Once the remedial alternatives are formed, the RAAS methodology can evaluate them in terms of effectiveness, implementability, and cost. RAAS will access a user-selected risk assessment code to determine the reduction of risk after remedial action by each recommended alternative. The methodology will also help determine the implementability of the remedial alternatives at a site and access cost estimating tools to provide estimates of capital, operating, and maintenance costs. This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses graphical, tabular and textual information about technologies, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Diplomatic Solutions to Additive Challenges

DTIC Science & Technology

Additive manufacturing (AM) technology, colloquially known as 3D printing , will bring significant benefits to society, but also poses great risks...regimes, are not sufficient to address the challenges presented by 3D printing technology. The DOS should evaluate and promote unconventional strategies...from printed weapons proliferation. Working with other nations to resolve the appropriate balance between development and security, and to promote norms

Microwave power transmission system studies. Volume 4: Sections 9 through 14 with appendices. [ground tests and antenna design

NASA Technical Reports Server (NTRS)

Maynard, O. E.; Brown, W. C.; Edwards, A.; Haley, J. T.; Meltz, G.; Howell, J. M.; Nathan, A.

1975-01-01

The microwave rectifier technology, approaches to the receiving antenna, topology of rectenna circuits, assembly and construction, ROM cost estimates are discussed. Analyses and cost estimates for the equipment required to transmit the ground power to an external user. Noise and harmonic considerations are presented for both the amplitron and klystron and interference limits are identified and evaluated. The risk assessment discussion is discussed wherein technology risks are rated and ranked with regard to their importance in impacting the microwave power transmission system. The system analyses and evaluation are included of parametric studies of system relationships pertaining to geometry, materials, specific cost, specific weight, efficiency, converter packing, frequency selection, power distribution, power density, power output magnitude, power source, transportation and assembly. Capital costs per kW and energy costs as a function of rate of return, power source and transportation costs as well as build cycle time are presented. The critical technology and ground test program are discussed along with ROM costs and schedule. The orbital test program with associated critical technology and ground based program based on full implementation of the defined objectives is discussed.

Early economic evaluation of emerging health technologies: protocol of a systematic review

PubMed Central

2014-01-01

Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. Discussion This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives. PMID:25055987

Early economic evaluation of emerging health technologies: protocol of a systematic review.

PubMed

Pham, Ba'; Tu, Hong Anh Thi; Han, Dolly; Pechlivanoglou, Petros; Miller, Fiona; Rac, Valeria; Chin, Warren; Tricco, Andrea C; Paulden, Mike; Bielecki, Joanna; Krahn, Murray

2014-07-23

The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives.

Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-09-01

The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologiesmore » identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.« less

Introduction of new process technology into the wastewater treatment sector.

PubMed

Parker, Denny S

2011-06-01

Innovative wastewater treatment technologies are developed to respond to changing regulatory requirements, increase efficiency, and enhance sustainability or to reduce capital or operating costs. Drawing from experience of five successful new process introductions from both the inventor/developer's and adopter's viewpoints coupled with the application of marketing analysis tools (an S curve), the phases of new technology market penetration can be identified along with the influence of market drivers, marketing, patents and early adopters. The analysis is used to identify measures that have increased the capture of benefits from new technology introduction. These have included funding by the government for research and demonstrations, transparency of information, and the provision of independent technology evaluations. To reduce the barriers and speed the introduction of new technology, and thereby harvest the full benefits from it, our industry must develop mechanisms for sharing risks and any consequences of failure more broadly than just amongst the early adopters. WEF and WERF will continue to have the central role in providing reliable information networks and independent technology evaluations.

Systems engineering and integration: Cost estimation and benefits analysis

NASA Technical Reports Server (NTRS)

Dean, ED; Fridge, Ernie; Hamaker, Joe

1990-01-01

Space Transportation Avionics hardware and software cost has traditionally been estimated in Phase A and B using cost techniques which predict cost as a function of various cost predictive variables such as weight, lines of code, functions to be performed, quantities of test hardware, quantities of flight hardware, design and development heritage, complexity, etc. The output of such analyses has been life cycle costs, economic benefits and related data. The major objectives of Cost Estimation and Benefits analysis are twofold: (1) to play a role in the evaluation of potential new space transportation avionics technologies, and (2) to benefit from emerging technological innovations. Both aspects of cost estimation and technology are discussed here. The role of cost analysis in the evaluation of potential technologies should be one of offering additional quantitative and qualitative information to aid decision-making. The cost analyses process needs to be fully integrated into the design process in such a way that cost trades, optimizations and sensitivities are understood. Current hardware cost models tend to primarily use weights, functional specifications, quantities, design heritage and complexity as metrics to predict cost. Software models mostly use functionality, volume of code, heritage and complexity as cost descriptive variables. Basic research needs to be initiated to develop metrics more responsive to the trades which are required for future launch vehicle avionics systems. These would include cost estimating capabilities that are sensitive to technological innovations such as improved materials and fabrication processes, computer aided design and manufacturing, self checkout and many others. In addition to basic cost estimating improvements, the process must be sensitive to the fact that no cost estimate can be quoted without also quoting a confidence associated with the estimate. In order to achieve this, better cost risk evaluation techniques are needed as well as improved usage of risk data by decision-makers. More and better ways to display and communicate cost and cost risk to management are required.

Evaluation of Small System Filtration Technologies for the Treatment of Color, Disinfection ByProducts and Microbiological Contaminants in Surface Water

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) National Risk Management Research Laboratory (NRMRL) evaluated various filtration systems at the EPA T&E Facility in Cincinnati, Ohio and at a field site in Ely, Minnesota (MN) in collaboration with the Minnesota Department of Health...

Digital technology for treating and preventing mental disorders in low-income and middle-income countries: a narrative review of the literature.

PubMed

Naslund, John A; Aschbrenner, Kelly A; Araya, Ricardo; Marsch, Lisa A; Unützer, Jürgen; Patel, Vikram; Bartels, Stephen J

2017-06-01

Few individuals living with mental disorders around the globe have access to mental health care, yet most have access to a mobile phone. Digital technology holds promise for improving access to, and quality of, mental health care. We reviewed evidence on the use of mobile, online, and other remote technologies for treatment and prevention of mental disorders in low-income and middle-income countries. Of the 49 studies identified, most were preliminary evaluations of feasibility and acceptability. The findings were promising, showing the potential effectiveness of online, text-messaging, and telephone support interventions. We summarised the evaluations as: technology for supporting clinical care and educating health workers, mobile tools for facilitating diagnosis and detection of mental disorders, technologies for promoting treatment adherence and supporting recovery, online self-help programmes for individuals with mental disorders, and programmes for substance misuse prevention and treatment. Continued research is needed to rigorously evaluate effectiveness, assess costs, and carefully consider potential risks of digital technology interventions for mental disorders, while determining how emerging technologies might support the scale-up of mental health treatment and prevention efforts across low-resource settings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Digital technology for treating and preventing mental disorders in low-income and middle-income countries: a narrative review of the literature

PubMed Central

Naslund, John A; Aschbrenner, Kelly A; Araya, Ricardo; Marsch, Lisa A; Unützer, Jürgen; Patel, Vikram; Bartels, Stephen J

2017-01-01

Few individuals living with mental disorders around the globe have access to mental health care, yet most have access to a mobile phone. Digital technology holds promise for improving access to, and quality of, mental health care. We reviewed evidence on the use of mobile, online, and other remote technologies for treatment and prevention of mental disorders in low-income and middle-income countries. Of the 49 studies identified, most were preliminary evaluations of feasibility and acceptability. The findings were promising, showing the potential effectiveness of online, text-messaging, and telephone support interventions. We summarised the evaluations as: technology for supporting clinical care and educating health workers, mobile tools for facilitating diagnosis and detection of mental disorders, technologies for promoting treatment adherence and supporting recovery, online self-help programmes for individuals with mental disorders, and programmes for substance misuse prevention and treatment. Continued research is needed to rigorously evaluate effectiveness, assess costs, and carefully consider potential risks of digital technology interventions for mental disorders, while determining how emerging technologies might support the scale-up of mental health treatment and prevention efforts across low-resource settings. PMID:28433615

Some factors influencing the nonexpert's perception and evaluation of environmental risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, E.

Policy makers and decision analysts have been limited somewhat in their ability to predict public reactions to regulatory decisions about hazardous substances or technologies. Most studies of the nonexpert's evaluation of environmental risks have relied on survey data and correlational analyses which preclude the determination of interactive effects, effects that could explain apparent inconsistencies. Three experimental studies were designed to test empirically the effect of six dimensions of environmental risk on judgments of (1) perceived risk, (2) acceptability of risk, (3) subjective probability of negative outcomes due to exposure, and (4) perceived severity of consequences. Factors examined included: (a) familiaritymore » with the terms used to describe a hazard, (b) environmental persistence of a chemical, (c) personal relevance of data used to evaluate cancer-causing potential, (d) personal relevance of possible adverse consequences, (e) perceived control over exposure, and (f) vividness of the exposure pathway. The findings were discussed in terms of their implications for the nonexpert's formulation of risk perceptions, and public policy in the domain of environmental risks.« less

In situ remediation of DNAPL compounds in low permeability media fate/transport, in situ control technologies, and risk reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-08-01

In this project, in situ remediation technologies are being tested and evaluated for both source control and mass removal of dense, non-aqueous phase liquid (DNAPL) compounds in low permeability media (LPM). This effort is focused on chlorinated solvents (e.g., trichloroethylene and perchloroethylene) in the vadose and saturated zones of low permeability, massive deposits, and stratified deposits with inter-bedded clay lenses. The project includes technology evaluation and screening analyses and field-scale testing at both clean and contaminated sites in the US and Canada. Throughout this project, activities have been directed at understanding the processes that influence DNPAL compound migration and treatmentmore » in LPM and to assessing the operation and performance of the remediation technologies developed and tested. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less

Problem formulation and option assessment (PFOA) linking governance and environmental risk assessment for technologies: a methodology for problem analysis of nanotechnologies and genetically engineered organisms.

PubMed

Nelson, Kristen C; Andow, David A; Banker, Michael J

2009-01-01

Societal evaluation of new technologies, specifically nanotechnology and genetically engineered organisms (GEOs), challenges current practices of governance and science. Employing environmental risk assessment (ERA) for governance and oversight assumes we have a reasonable ability to understand consequences and predict adverse effects. However, traditional ERA has come under considerable criticism for its many shortcomings and current governance institutions have demonstrated limitations in transparency, public input, and capacity. Problem Formulation and Options Assessment (PFOA) is a methodology founded on three key concepts in risk assessment (science-based consideration, deliberation, and multi-criteria analysis) and three in governance (participation, transparency, and accountability). Developed through a series of international workshops, the PFOA process emphasizes engagement with stakeholders in iterative stages, from identification of the problem(s) through comparison of multiple technology solutions that could be used in the future with their relative benefits, harms, and risk. It provides "upstream public engagement" in a deliberation informed by science that identifies values for improved decision making.

Determining Risk - How to Evaluate the Environmental Effects of Marine and Hydrokinetic Energy Development

NASA Astrophysics Data System (ADS)

Copping, A. E.; Blake, K.; Zdanski, L.

2011-12-01

As marine and hydrokinetic (MHK) energy development projects progress towards early deployments in the U.S., the process of determining the risks to aquatic animals, habitats, and ecosystem processes from these engineered systems continues to be a significant barrier to efficient siting and permitting. Understanding the risk of MHK installations requires that the two elements of risk - consequence and probability - be evaluated. However, standard risk assessment methodologies are not easily applied to MHK interactions with marine and riverine environment as there are few data that describe the interaction of stressors (MHK devices, anchors, foundations, mooring lines and power cables) and receptors (aquatic animals, habitats and ecosystem processes). The number of possible combinations and permutations of stressors and receptors in MHK systems is large: there are many different technologies designed to harvest energy from the tides, waves and flowing rivers; each device is planned for a specific waterbody that supports an endemic ecosystem of animals and habitats, tied together by specific physical and chemical processes. With few appropriate analogue industries in the oceans and rivers, little information on the effects of these technologies on the living world is available. Similarly, without robust data sets of interactions, mathematical probability models are difficult to apply. Pacific Northwest National Laboratory scientists are working with MHK developers, researchers, engineers, and regulators to rank the consequences of planned MHK projects on living systems, and exploring alternative methodologies to estimate probabilities of these encounters. This paper will present the results of ERES, the Environmental Risk Evaluation System, which has been used to rank consequences for major animal groups and habitats for five MHK projects that are in advanced stages of development and/or early commercial deployment. Probability analyses have been performed for high priority stressor/receptor interactions where data are adaptable from other industries. In addition, a methodology for evaluating the probability of encounter, and therefore risk, to an endangered marine mammal from tidal turbine blades will be presented.

Determining the Quality and Impact of an E-Mentoring Program on At-Risk Youth

ERIC Educational Resources Information Center

Culpepper, Diane W.; Hernandez-Gantes, Victor M.; Blank, William E.

2015-01-01

The purpose of this study was to determine the quality of an e-mentoring program and the impact of participation on at-risk high school students enrolled in dropout prevention programs. The quality of the program was evaluated based on the ease of implementation, use of technology, and overall satisfaction. Indicators of student's self-esteem,…

Applying Formal Methods to NASA Projects: Transition from Research to Practice

NASA Technical Reports Server (NTRS)

Othon, Bill

2009-01-01

NASA project managers attempt to manage risk by relying on mature, well-understood process and technology when designing spacecraft. In the case of crewed systems, the margin for error is even tighter and leads to risk aversion. But as we look to future missions to the Moon and Mars, the complexity of the systems will increase as the spacecraft and crew work together with less reliance on Earth-based support. NASA will be forced to look for new ways to do business. Formal methods technologies can help NASA develop complex but cost effective spacecraft in many domains, including requirements and design, software development and inspection, and verification and validation of vehicle subsystems. To realize these gains, the technologies must be matured and field-tested so that they are proven when needed. During this discussion, current activities used to evaluate FM technologies for Orion spacecraft design will be reviewed. Also, suggestions will be made to demonstrate value to current designers, and mature the technology for eventual use in safety-critical NASA missions.

Image of Synthetic Biology and Nanotechnology: A Survey among University Students

PubMed Central

Ineichen, Christian; Biller-Andorno, Nikola; Deplazes-Zemp, Anna

2017-01-01

This study explores the image of synthetic biology and nanotechnology in comparison to agricultural biotechnology and communication technology by examining spontaneous associations with, and deliberate evaluations of, these technologies by university students. Data were collected through a self-completion online questionnaire by students from two universities in Switzerland. The survey aimed to capture implicit associations, explicit harm-benefit evaluations and views on regulation. The data suggest overall positive associations with emerging technologies. While positive associations were most pronounced for nanotechnology, agricultural biotechnology was attributed with the least favorable associations. In contrast to its positive result in the association task, respondents attributed a high harm potential for nanotechnology. Associations attributed to synthetic biology were demonstrated to be more positive than for agricultural biotechnology, however, not as favorable as for nanotechnology. Contrary to the evaluations of nanotechnology, the benefit-examples of synthetic biology were evaluated particularly positively. Accordingly, the investigated technologies enjoy different esteem, with synthetic biology and nanotechnology both showing a more “exciting” image. Even though, the image of nanotechnology was demonstrated to be more pronounced it was also more heterogeneous across tasks while agricultural biotechnology remains contested. For all technologies, the predominant spontaneous concerns pertain to risks rather than an immoral nature inherent to these technologies. Our data suggest that harm-benefit analyses reveal only one aspect of the attitude toward emerging technologies. Survey questions addressing spontaneous associations with these technologies are a valuable addition for our picture of the image of emerging technologies. PMID:28979291

Eliminating the Rhetoric: An Evaluation of the Halt Phase Strategy

DTIC Science & Technology

1999-06-01

Halt operations can demonstrate to the enemy leadership that continued aggression equals unacceptable risk because air superiority can be exploited...lesson can be drawn. The presence of ground forces demonstrates commitment and leadership . Powerful ground combat forces represent the strongest... leadership far more than technology will determine who wins and who loses." 10 The Fallacy of Technological Determinism Another main theme in critiques of

Risk assessment can be a game-changing information technology--but too often it isn't.

PubMed

Goble, Robert; Bier, Vicki M

2013-11-01

The printing press was a game-changing information technology. Risk assessment could be also. At present, risk assessments are commonly used as one-time decision aids: they provide justification for a particular decision, and afterwards usually sit on a shelf. However, when viewed as information technologies, their potential uses are much broader. Risk assessments: (1) are repositories of structured information and a medium for communication; (2) embody evaluative structures for setting priorities; (3) can preserve information over time and permit asynchronous communication, thus encouraging learning and adaptation; and (4) explicitly address uncertain futures. Moreover, because of their "what-if" capabilities, risk assessments can serve as a platform for constructive discussion among parties that hold different values. The evolution of risk assessment in the nuclear industry shows how such attributes have been used to lower core-melt risks substantially through improved templates for maintenance and more effective coordination with regulators (although risk assessment has been less commonly used in improving emergency-response capabilities). The end result of this evolution in the nuclear industry has been the development of "living" risk assessments that are updated more or less in real time to answer even routine operational questions. Similar but untapped opportunities abound for the use of living risk assessments to reduce risks in small operational decisions as well as large policy decisions in other areas of hazard management. They can also help improve understanding of and communication about risks, and future risk assessment and management. Realization of these opportunities will require significant changes in incentives and active promotion by the risk analytic community. © 2013 Society for Risk Analysis.

A methodology for spacecraft technology insertion analysis balancing benefit, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David Allen

Emerging technologies are changing the way space missions are developed and implemented. Technology development programs are proceeding with the goal of enhancing spacecraft performance and reducing mass and cost. However, it is often the case that technology insertion assessment activities, in the interest of maximizing performance and/or mass reduction, do not consider synergistic system-level effects. Furthermore, even though technical risks are often identified as a large cost and schedule driver, many design processes ignore effects of cost and schedule uncertainty. This research is based on the hypothesis that technology selection is a problem of balancing interrelated (and potentially competing) objectives. Current spacecraft technology selection approaches are summarized, and a Methodology for Evaluating and Ranking Insertion of Technology (MERIT) that expands on these practices to attack otherwise unsolved problems is demonstrated. MERIT combines the modern techniques of technology maturity measures, parametric models, genetic algorithms, and risk assessment (cost and schedule) in a unique manner to resolve very difficult issues including: user-generated uncertainty, relationships between cost/schedule and complexity, and technology "portfolio" management. While the methodology is sufficiently generic that it may in theory be applied to a number of technology insertion problems, this research focuses on application to the specific case of small (<500 kg) satellite design. Small satellite missions are of particular interest because they are often developed under rigid programmatic (cost and schedule) constraints and are motivated to introduce advanced technologies into the design. MERIT is demonstrated for programs procured under varying conditions and constraints such as stringent performance goals, not-to-exceed costs, or hard schedule requirements. MERIT'S contributions to the engineering community are its: unique coupling of the aspects of performance, cost, and schedule; assessment of system level impacts of technology insertion; procedures for estimating uncertainties (risks) associated with advanced technology; and application of heuristics to facilitate informed system-level technology utilization decisions earlier in the conceptual design phase. MERIT extends the state of the art in technology insertion assessment selection practice and, if adopted, may aid designers in determining the configuration of complex systems that meet essential requirements in a timely, cost-effective manner.

Rethinking risk assessment for emerging technology first-in-human trials.

PubMed

Genske, Anna; Engel-Glatter, Sabrina

2016-03-01

Recent progress in synthetic biology (SynBio) has enabled the development of novel therapeutic opportunities for the treatment of human disease. In the near future, first-in-human trials (FIH) will be indicated. FIH trials mark a key milestone in the translation of medical SynBio applications into clinical practice. Fostered by uncertainty of possible adverse events for trial participants, a variety of ethical concerns emerge with regards to SynBio FIH trials, including 'risk' minimization. These concerns are associated with any FIH trial, however, due to the novelty of the approach, they become more pronounced for medical applications of emerging technologies (emTech) like SynBio. To minimize potential harm for trial participants, scholars, guidelines, regulations and policy makers alike suggest using 'risk assessment' as evaluation tool for such trials. Conversely, in the context of emTech FIH trials, we believe it to be at least questionable to contextualize uncertainty of potential adverse events as 'risk' and apply traditional risk assessment methods. Hence, this issue needs to be discussed to enable alterations of the evaluation process before the translational phase of SynBio applications begins. In this paper, we will take the opportunity to start the debate and highlight how a misunderstanding of the concept of risk, and the possibilities and limitations of risk assessment, respectively, might impair decision-making by the relevant regulatory authorities and research ethics committees, and discuss possible solutions to tackle the issue.

A Review of New and Developing Technology to Significantly Improve Mars Sample-Return Missions

NASA Technical Reports Server (NTRS)

Carsey, F.; Brophy, J.; Gilmore, M.; Rodgers, D.; Wilcox, B.

2000-01-01

A JPL development activity was initiated in FY 1999 for the purpose of examining and evaluating technologies that could materially improve future (i.e., beyond the 2005 launch) Mars sample return missions. The scope of the technology review was comprehensive and end-to-end; the goal was to improve mass, cost, risk, and scientific return. A specific objective was to assess approaches to sample return with only one Earth launch. While the objective of the study was specifically for sample-return, in-situ missions can also benefit from using many of the technologies examined.

Pacific Northwest Laboratory annual report for 1983 to the DOE Office of Energy Research. Part 1. Biomedical sciences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drucker, H.

1983-02-01

Biomedical and health effects research conducted at PNL in 1982 on the evaluation of risk to man from existing and/or developing energy-related technologies are described. Most of the studies described in this report relate to activities for three major energy technologies: nuclear fuel cycle; fossil fuel cycle (oil, gas, and coal process technologies, mining, and utilization; synfuel development), and fudion (biomagnetic effects). The report is organized under these technologies. In addition, research reports are included on the application of nuclear energy to biomedical problems. Individual projects are indexed separately.

A Review of New and Developing Technology to Significantly Improve Mars Sample-Return Missions

NASA Astrophysics Data System (ADS)

Carsey, F.; Brophy, J.; Gilmore, M.; Rodgers, D.; Wilcox, B.

2000-07-01

A JPL development activity was initiated in FY 1999 for the purpose of examining and evaluating technologies that could materially improve future (i.e., beyond the 2005 launch) Mars sample return missions. The scope of the technology review was comprehensive and end-to-end; the goal was to improve mass, cost, risk, and scientific return. A specific objective was to assess approaches to sample return with only one Earth launch. While the objective of the study was specifically for sample-return, in-situ missions can also benefit from using many of the technologies examined.

Strategic Vision for Adopting 21st Century Science Methodologies

EPA Pesticide Factsheets

To better protect human health and the environment, EPA’s OPP is developing and evaluating new technologies in molecular, cellular, computational sciences to supplement or replace more traditional methods of toxicity testing and risk assessment.

78 FR 45992 - National Science and Technology Council; Notice of Meeting: Open Meeting of the National Science...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

..., and the general public; analysis of the role of comparative risk assessment in these evaluations, including decision analysis tools and gap analysis tools; identification, through case study presentations...

Risk Management of Microelectronics: The NASA Electronic Parts and Packaging (NEPP) Program

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2005-01-01

This viewgraph information provides information on how the NASA Electronic Parts and Packaging (NEPP) Program evaluates the reliability of technologies for Electrical, Electronic, and Electromechanical (EEE) parts, and their suitability for spacecraft applications.

Intelligent instrumentation applied in environment management

NASA Astrophysics Data System (ADS)

Magheti, Mihnea I.; Walsh, Patrick; Delassus, Patrick

2005-06-01

The use of information and communications technology in environment management and research has witnessed a renaissance in recent years. From optical sensor technology, expert systems, GIS and communications technologies to computer aided harvesting and yield prediction, these systems are increasable used for applications developing in the management sector of natural resources and biodiversity. This paper presents an environmental decision support system, used to monitor biodiversity and present a risk rating for the invasion of pests into the particular systems being examined. This system will utilise expert mobile technology coupled with artificial intelligence and predictive modelling, and will emphasize the potential for expansion into many areas of intelligent remote sensing and computer aided decision-making for environment management or certification. Monitoring and prediction in natural systems, harnessing the potential of computing and communication technologies is an emerging technology within the area of environmental management. This research will lead to the initiation of a hardware and software multi tier decision support system for environment management allowing an evaluation of areas for biodiversity or areas at risk from invasive species, based upon environmental factors/systems.

The problem of active SETI: An overview

NASA Astrophysics Data System (ADS)

Musso, Paolo

2012-09-01

In the present paper (originally presented at the First IAA Symposium on Searching for Life Signatures hold at the UNESCO on 22-26 September 2008) I try to summarize the results of all my previous studies on active SETI and its possible dangers for us, also considering some new topics, in order to provide a possibly complete overview of the whole matter. First, I try to evaluate the possible risks of an indirect contact with aliens, from the social, cultural, and religious point of view; then, the possible risks related with receiving information about alien science and technology; finally, the risk that active SETI could increase the probability of a physical contact with hostile aliens. My conclusion is that active SETI is very unlikely to be dangerous for us, but, at present, such a possibility cannot be completely excluded. Surprisingly, it turns out that a very important point to be assessed in order to improve our evaluation of active SETI is the pace of our technological progress. Some suggestions about the policy that international community should adopt towards active SETI are also included.

QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2010-01-01

This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

Communication Technology Used among Parents and Their College Teens: Implications for College Health Promotion and Risk Prevention Programs

ERIC Educational Resources Information Center

Abar, Caitlin C.; Abar, Beau; Turrisi, Robert; Belden, Calum

2013-01-01

The current study examined the nature of parent-teen communication in college to re-evaluate the potential for parent inclusion in college success and risk prevention programs. During September 2006, 290 first-year college students were assessed for the frequency and form (e.g., cell phone, e-mail, text) of communication with their parents. Latent…

Iterative evaluation in a mobile counseling and testing program to reach people of color at risk for HIV--new strategies improve program acceptability, effectiveness, and evaluation capabilities.

PubMed

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2011-06-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program's results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention's HIV testing recommendations.

ITERATIVE EVALUATION IN A MOBILE COUNSELING AND TESTING PROGRAM TO REACH PEOPLE OF COLOR AT RISK FOR HIV—NEW STRATEGIES IMPROVE PROGRAM ACCEPTABILITY, EFFECTIVENESS, AND EVALUATION CAPABILITIES

PubMed Central

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2016-01-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program’s results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention’s HIV testing recommendations. PMID:21689041

Decision Gate Process for Assessment of a NASA Technology Development Portfolio

NASA Technical Reports Server (NTRS)

Kohli, Rajiv; Fishman, Julianna L.; Hyatt, Mark J.

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to Technology Readiness Level (TRL) 6) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, to reduce life cycle cost and risk, and to increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product was either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Time/frequency systems.

DOT National Transportation Integrated Search

1971-06-01

The report summarizes the work performed at DOT/TSC on the Time/Frequency ATC System study project. Principal emphasis in this report is given to the evaluation and analysis of the technological risk areas. A survey and description of proposed T/F sy...

PROTOCOL FOR LABORATORY TESTING OF CRUDE-OIL BIOREMEDIATION PRODUCTS IN FRESHWATER CONDITIONS

EPA Science Inventory

In 1993, the Environmental Protection Agency, National Risk Management Research Laboratory (EPA, NRMRL), with the National Environmental Technology Application Center (NETAC), developed a protocol for evaluation of bioremediation products in marine environments. The marine proto...

Methodolgy For Evaluation Of Technology Impacts In Space Electric Power Systems

NASA Technical Reports Server (NTRS)

Holda, Julie

2004-01-01

The Analysis and Management branch of the Power and Propulsion Office at NASA Glenn Research Center is responsible for performing complex analyses of the space power and In-Space propulsion products developed by GRC. This work quantifies the benefits of the advanced technologies to support on-going advocacy efforts. The Power and Propulsion Office is committed to understanding how the advancement in space technologies could benefit future NASA missions. They support many diverse projects and missions throughout NASA as well as industry and academia. The area of work that we are concentrating on is space technology investment strategies. Our goal is to develop a Monte-Carlo based tool to investigate technology impacts in space electric power systems. The framework is being developed at this stage, which will be used to set up a computer simulation of a space electric power system (EPS). The outcome is expected to be a probabilistic assessment of critical technologies and potential development issues. We are developing methods for integrating existing spreadsheet-based tools into the simulation tool. Also, work is being done on defining interface protocols to enable rapid integration of future tools. Monte Carlo-based simulation programs for statistical modeling of the EPS Model. I decided to learn and evaluate Palisade's @Risk and Risk Optimizer software, and utilize it's capabilities for the Electric Power System (EPS) model. I also looked at similar software packages (JMP, SPSS, Crystal Ball, VenSim, Analytica) available from other suppliers and evaluated them. The second task was to develop the framework for the tool, in which we had to define technology characteristics using weighing factors and probability distributions. Also we had to define the simulation space and add hard and soft constraints to the model. The third task is to incorporate (preliminary) cost factors into the model. A final task is developing a cross-platform solution of this framework.

Decision Gate Process for Assessment of a Technology Development Portfolio

NASA Technical Reports Server (NTRS)

Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Benefits of Using a Mars Forward Strategy for Lunar Surface Systems

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Griffin, Brand; Smitherman, David; Maples, Dauphne

2009-01-01

This paper identifies potential risk reduction, cost savings and programmatic procurement benefits of a Mars Forward Lunar Surface System architecture that provides commonality or evolutionary development paths for lunar surface system elements applicable to Mars surface systems. The objective of this paper is to identify the potential benefits for incorporating a Mars Forward development strategy into the planned Project Constellation Lunar Surface System Architecture. The benefits include cost savings, technology readiness, and design validation of systems that would be applicable to lunar and Mars surface systems. The paper presents a survey of previous lunar and Mars surface systems design concepts and provides an assessment of previous conclusions concerning those systems in light of the current Project Constellation Exploration Architectures. The operational requirements for current Project Constellation lunar and Mars surface system elements are compared and evaluated to identify the potential risk reduction strategies that build on lunar surface systems to reduce the technical and programmatic risks for Mars exploration. Risk reduction for rapidly evolving technologies is achieved through systematic evolution of technologies and components based on Moore's Law superimposed on the typical NASA systems engineering project development "V-cycle" described in NASA NPR 7120.5. Risk reduction for established or slowly evolving technologies is achieved through a process called the Mars-Ready Platform strategy in which incremental improvements lead from the initial lunar surface system components to Mars-Ready technologies. The potential programmatic benefits of the Mars Forward strategy are provided in terms of the transition from the lunar exploration campaign to the Mars exploration campaign. By utilizing a sequential combined procurement strategy for lunar and Mars exploration surface systems, the overall budget wedges for exploration systems are reduced and the costly technological development gap between the lunar and Mars programs can be eliminated. This provides a sustained level of technological competitiveness as well as maintaining a stable engineering and manufacturing capability throughout the entire duration of Project Constellation.

New technologies in the management of risk and violence in forensic settings.

PubMed

Tully, John; Larkin, Fintan; Fahy, Thomas

2015-06-01

Novel technological interventions are increasingly used in mental health settings. In this article, we describe 3 novel technological strategies in use for management of risk and violence in 2 forensic psychiatry settings in the United Kingdom: electronic monitoring by GPS-based tracking devices of patients on leave from a medium secure service in London, and closed circuit television (CCTV) monitoring and motion sensor technology at Broadmoor high secure hospital. A common theme is the use of these technologies to improve the completeness and accuracy of data used by clinicians to make clinical decisions. Another common thread is that each of these strategies supports and improves current clinical approaches rather than drastically changing them. The technologies offer a broad range of benefits. These include less restrictive options for patients, improved accountability of both staff and patients, less invasive testing, improved automated record-keeping, and better assurance reporting. Services utilizing technologies need also be aware of limitations. Technologies may be seen as unduly restrictive by patients and advocates, and technical issues may reduce effectiveness. It is vital that the types of technological innovations described in this article should be subject to thorough evaluation that addresses cost effectiveness, qualitative analysis of patients' attitudes, safety, and ethical considerations.

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age

PubMed Central

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-01-01

Summary To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. In order to adequately meet the mental health needs of today’s society, psychiatry must engage in rigorous assessment of the impact of digital technologies. PMID:26932479

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age.

PubMed

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-03-01

To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. To adequately meet the mental health needs of today's society, psychiatry must engage in rigorous assessment of the impact of digital technologies. © The Royal College of Psychiatrists 2016.

NovaNET 2008-09 Evaluation. Impact Evaluation. E&R Report No. 09.36

ERIC Educational Resources Information Center

Bulgakov-Cook, Dina

2010-01-01

NovaNET is a technology-based teacher-facilitated educational approach used at schools to support students at risk of not meeting graduation requirements to accrue credits in a variety of subjects. NovaNET contributes to the WCPSS goal of closing achievement gaps and creating opportunities for all students to graduate on time. In 2008-09, 38…

Assessment of the disposal of radioactive petroleum industry waste in nonhazardous landfills using risk-based modeling.

PubMed

Smith, Karen P; Arnish, John J; Williams, Gustavious P; Blunt, Deborah L

2003-05-15

Certain petroleum production activities cause naturally occurring radioactive materials (NORM) to accumulate in concentrations above natural background levels, making safe and cost-effective management of such technologically enhanced NORM (TENORM) a key issue for the petroleum industry. As a result, both industry and regulators are interested in identifying cost-effective disposal alternatives that provide adequate protection of human health and the environment One such alternative, currently allowed in Michigan with restrictions, is the disposal of TENORM wastes in nonhazardous waste landfills. The disposal of petroleum industry wastes containing radium-226 (Ra-226) in nonhazardous landfills was modeled to evaluate the potential radiological doses and health risks to workers and the public. Multiple scenarios were considered in evaluating the potential risks associated with landfill operations and the future use of the property. The scenarios were defined, in part, to evaluate the Michigan policy; sensitivity analyses were conducted to evaluate the impact of key parameters on potential risks. The results indicate that the disposal of petroleum industry TENORM wastes in nonhazardous landfills in accordance with the Michigan policy and existing landfill regulations presents a negligible risk to most of the potential receptors considered in this study.

Conservation and renewable energy technologies for transportation

NASA Astrophysics Data System (ADS)

1990-11-01

The Office of Transportation Technologies (OTT) is charged with long-term, high-risk, and potentially high-payoff research and development of promising transportation technologies that are unlikely to be undertaken by the private sector alone. OTT activities are designed to develop an advanced technology base within the U.S. transportation industry for future manufacture of more energy-efficient, fuel-flexible, and environmentally sound transportation systems. OTT operations are focused on three areas: advanced automotive propulsion systems including gas turbines, low heat rejection diesel, and electric vehicle technologies; advanced materials development and tribology research; and research, development, demonstration, test, and evaluation (including field testing in fleet operations) of alternative fuels. Five papers describing the transportation technologies program have been indexed separately for inclusion on the data base.

Evaluating the risk of water distribution system failure: A shared frailty model

NASA Astrophysics Data System (ADS)

Clark, Robert M.; Thurnau, Robert C.

2011-12-01

Condition assessment (CA) Modeling is drawing increasing interest as a technique that can assist in managing drinking water infrastructure. This paper develops a model based on the application of a Cox proportional hazard (PH)/shared frailty model and applies it to evaluating the risk of failure in drinking water networks using data from the Laramie Water Utility (located in Laramie, Wyoming, USA). Using the risk model a cost/ benefit analysis incorporating the inspection value method (IVM), is used to assist in making improved repair, replacement and rehabilitation decisions for selected drinking water distribution system pipes. A separate model is developed to predict failures in prestressed concrete cylinder pipe (PCCP). Various currently available inspection technologies are presented and discussed.

Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

NASA Technical Reports Server (NTRS)

Obrien, W. J.

1976-01-01

Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Crocker, Andy; Graham, Bart

2016-01-01

Dynetics has designed innovative structure assemblies; manufactured them using Friction Stir Welding (FSW) to leverage NASA investments in tools, facilities, and processes; conducted proof and burst testing, demonstrating viability of design/build processes Dynetics/AR has applied state-of-the-art manufacturing and processing techniques to the heritage F-1, reducing risk for engine development Dynetics/AR has also made progress on technology demonstrations for ORSC cycle engine, which offers affordability and performance for both NASA and other launch vehicles Full-scale integrated oxidizer-rich test article. Testing will evaluate performance and combustion stability characteristics. Contributes to technology maturation for ox-rich staged combustion engines.

Fission Power System Technology for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Mason, Lee; Houts, Michael

2011-01-01

Under the NASA Exploration Technology Development Program, and in partnership with the Department of Energy (DOE), NASA is conducting a project to mature Fission Power System (FPS) technology. A primary project goal is to develop viable system options to support future NASA mission needs for nuclear power. The main FPS project objectives are as follows: 1) Develop FPS concepts that meet expected NASA mission power requirements at reasonable cost with added benefits over other options. 2) Establish a hardware-based technical foundation for FPS design concepts and reduce overall development risk. 3) Reduce the cost uncertainties for FPS and establish greater credibility for flight system cost estimates. 4) Generate the key products to allow NASA decisionmakers to consider FPS as a preferred option for flight development. In order to achieve these goals, the FPS project has two main thrusts: concept definition and risk reduction. Under concept definition, NASA and DOE are performing trade studies, defining requirements, developing analytical tools, and formulating system concepts. A typical FPS consists of the reactor, shield, power conversion, heat rejection, and power management and distribution (PMAD). Studies are performed to identify the desired design parameters for each subsystem that allow the system to meet the requirements with reasonable cost and development risk. Risk reduction provides the means to evaluate technologies in a laboratory test environment. Non-nuclear hardware prototypes are built and tested to verify performance expectations, gain operating experience, and resolve design uncertainties.

[Parents' actions for prevention of arterial hypertension educational technology for health].

PubMed

Santos, Zélia Maria de Sousa Araújo; Caetano, Joselany Afio; Moreira, Francisco Getúlio Alves

2011-11-01

This participatory research aimed to evaluate behavioral changes in fifteen parents of pre-school children to prevent the risk factors of arterial hypertension, by applying education technology for health that is based on the Health Beliefs Model at a private school in Fortaleza, State of Ceará, Brazil. The field research was carried out through educational workshops and data collection through questionnaires and interviews. After organizing the data into categories, analysis was based on the premises of health education. Through the application of education technology for health, significant changes were observed in the parents' habits, besides the roles they assumed as agents of change and multipliers of educational actions in the family. Although difficulties arose in the process of change, the parents were motivated to prevent the risk factors of arterial hypertension in themselves and their children. Thus, education technology for health based on the Health Beliefs Model proved to be efficient, as significant behavioral changes occurred and the parents were motivated to prevent arterial hypertension by means of a healthy lifestyle.

From design to implementation--the Joint Asia Diabetes Evaluation (JADE) program: a descriptive report of an electronic web-based diabetes management program.

PubMed

Ko, Gary T; So, Wing-Yee; Tong, Peter C; Le Coguiec, Francois; Kerr, Debborah; Lyubomirsky, Greg; Tamesis, Beaver; Wolthers, Troels; Nan, Jennifer; Chan, Juliana

2010-05-13

The Joint Asia Diabetes Evaluation (JADE) Program is a web-based program incorporating a comprehensive risk engine, care protocols, and clinical decision support to improve ambulatory diabetes care. The JADE Program uses information technology to facilitate healthcare professionals to create a diabetes registry and to deliver an evidence-based care and education protocol tailored to patients' risk profiles. With written informed consent from participating patients and care providers, all data are anonymized and stored in a databank to establish an Asian Diabetes Database for research and publication purpose. The JADE electronic portal (e-portal: http://www.jade-adf.org) is implemented as a Java application using the Apache web server, the mySQL database and the Cocoon framework. The JADE e-portal comprises a risk engine which predicts 5-year probability of major clinical events based on parameters collected during an annual comprehensive assessment. Based on this risk stratification, the JADE e-portal recommends a care protocol tailored to these risk levels with decision support triggered by various risk factors. Apart from establishing a registry for quality assurance and data tracking, the JADE e-portal also displays trends of risk factor control at each visit to promote doctor-patient dialogues and to empower both parties to make informed decisions. The JADE Program is a prototype using information technology to facilitate implementation of a comprehensive care model, as recommended by the International Diabetes Federation. It also enables health care teams to record, manage, track and analyze the clinical course and outcomes of people with diabetes.

Innovative use of the integrative review to evaluate evidence of technology transformation in healthcare.

PubMed

Phillips, Andrew B; Merrill, Jacqueline A

2015-12-01

Healthcare is in a period significant transformational activity through the accelerated adoption of healthcare technologies, new reimbursement systems that emphasize shared savings and care coordination, and the common place use of mobile technologies by patients, providers, and others. The complexity of healthcare creates barriers to transformational activity and has the potential to inhibit the desired paths toward change envisioned by policymakers. Methods for understanding how change is occurring within this complex environment are important to the evaluation of delivery system reform and the role of technology in healthcare transformation. This study examines the use on an integrative review methodology to evaluate the healthcare literature for evidence of technology transformation in healthcare. The methodology integrates the evaluation of a broad set of literature with an established evaluative framework to develop a more complete understanding of a particular topic. We applied this methodology and the framework of punctuated equilibrium (PEq) to the analysis of the healthcare literature from 2004 to 2012 for evidence of technology transformation, a time during which technology was at the forefront of healthcare policy. The analysis demonstrated that the established PEq framework applied to the literature showed considerable potential for evaluating the progress of policies that encourage healthcare transformation. Significant inhibitors to change were identified through the integrative review and categorized into ten themes that describe the resistant structure of healthcare delivery: variations in the environment; market complexity; regulations; flawed risks and rewards; change theories; barriers; ethical considerations; competition and sustainability; environmental elements, and internal elements. We hypothesize that the resistant nature of the healthcare system described by this study creates barriers to the direct consumer involvement and engagement necessary for transformational change. Future policies should be directed at removing these barriers by demanding and emphasizing open technologies and unrestricted access to data versus as currently prescribed by technology vendors, practitioners, and policies that perpetuate market equilibrium. Copyright © 2015 Elsevier Inc. All rights reserved.

Illustrative case using the RISK21 roadmap and matrix: prioritization for evaluation of chemicals found in drinking water

PubMed Central

Wolf, Douglas C.; Bachman, Ammie; Barrett, Gordon; Bellin, Cheryl; Goodman, Jay I.; Jensen, Elke; Moretto, Angelo; McMullin, Tami; Pastoor, Timothy P.; Schoeny, Rita; Slezak, Brian; Wend, Korinna; Embry, Michelle R.

2016-01-01

ABSTRACT The HESI-led RISK21 effort has developed a framework supporting the use of twenty-first century technology in obtaining and using information for chemical risk assessment. This framework represents a problem formulation-based, exposure-driven, tiered data acquisition approach that leads to an informed decision on human health safety to be made when sufficient evidence is available. It provides a transparent and consistent approach to evaluate information in order to maximize the ability of assessments to inform decisions and to optimize the use of resources. To demonstrate the application of the framework’s roadmap and matrix, this case study evaluates a large number of chemicals that could be present in drinking water. The focus is to prioritize which of these should be considered for human health risk as individual contaminants. The example evaluates 20 potential drinking water contaminants, using the tiered RISK21 approach in combination with graphical representation of information at each step, using the RISK21 matrix. Utilizing the framework, 11 of the 20 chemicals were assigned low priority based on available exposure data alone, which demonstrated that exposure was extremely low. The remaining nine chemicals were further evaluated, using refined estimates of toxicity based on readily available data, with three deemed high priority for further evaluation. In the present case study, it was determined that the greatest value of additional information would be from improved exposure models and not from additional hazard characterization. PMID:26451723

Illustrative case using the RISK21 roadmap and matrix: prioritization for evaluation of chemicals found in drinking water.

PubMed

Wolf, Douglas C; Bachman, Ammie; Barrett, Gordon; Bellin, Cheryl; Goodman, Jay I; Jensen, Elke; Moretto, Angelo; McMullin, Tami; Pastoor, Timothy P; Schoeny, Rita; Slezak, Brian; Wend, Korinna; Embry, Michelle R

2016-01-01

The HESI-led RISK21 effort has developed a framework supporting the use of twenty-first century technology in obtaining and using information for chemical risk assessment. This framework represents a problem formulation-based, exposure-driven, tiered data acquisition approach that leads to an informed decision on human health safety to be made when sufficient evidence is available. It provides a transparent and consistent approach to evaluate information in order to maximize the ability of assessments to inform decisions and to optimize the use of resources. To demonstrate the application of the framework's roadmap and matrix, this case study evaluates a large number of chemicals that could be present in drinking water. The focus is to prioritize which of these should be considered for human health risk as individual contaminants. The example evaluates 20 potential drinking water contaminants, using the tiered RISK21 approach in combination with graphical representation of information at each step, using the RISK21 matrix. Utilizing the framework, 11 of the 20 chemicals were assigned low priority based on available exposure data alone, which demonstrated that exposure was extremely low. The remaining nine chemicals were further evaluated, using refined estimates of toxicity based on readily available data, with three deemed high priority for further evaluation. In the present case study, it was determined that the greatest value of additional information would be from improved exposure models and not from additional hazard characterization.

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Use of commercial-off-the-shelf (COTS) components and emerging technologies often require space flight missions to accept elevated risk. The Radiation Hardness Assurance (RHA) flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate and mitigate the risk a project or program takes. Depending on the mission profile and environment, different missions may not necessarily benefit from the same risk reduction efforts or cost reduction attempts. While this poses challenges for the radiation engineer, it also presents opportunities to tailor the RHA flow to minimize risk based on the environment or design criticality while remaining within budget. This presentation will focus on an approach to RHA amidst the present challenges, using the same RHA flow as in the past, with examples from recent radiation test results. The current challenges and the types of risk will be identified. How these risks drive requirements development and realization will be explained with examples of device results and data for single event effects (SEE) and in one case total ionizing dose (TID).

Phthalates and Cumulative Risk Assessment (NAS Final ...

EPA Pesticide Factsheets

On December 18, 2008, the National Academy of Sciences' National Research Council released a final report, requested and sponsored by the EPA, entitled Phthalates and Cumulative Risk Assessment: The Task Ahead. Risk assessment has become a dominant public policy tool for making choices, based on limited resources, to protect public health and the environment. It has been instrumental to the mission of the U.S. Environmental Protection Agency (EPA) as well as other federal agencies in evaluating public health concerns, informing regulatory and technological decisions, prioritizing research needs and funding, and in developing approaches for cost-benefit analysis. People are exposed to a variety of chemicals throughout their daily lives. To protect public health, regulators use risk assessments to examine the effects of chemical exposures. This book provides guidance for assessing the risk of phthalates, chemicals found in many consumer products that have been shown to affect the development of the male reproductive system of laboratory animals. Because people are exposed to multiple phthalates and other chemicals that affect male reproductive development, a cumulative risk assessment should be conducted that evaluates the combined effects of exposure to all these chemicals. The book suggests an approach for cumulative risk assessment that can serve as a model for evaluating the health risks of other types of chemicals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strickland, Christopher E.; Johnson, Christian D.; Lee, Brady D.

Iodine-129 (129I) generated at the U.S. Department of Energy (DOE) Hanford Site during plutonium production was released to the subsurface, resulting in several large, though dilute, plumes in the groundwater, including the plume in the 200-UP-1 operable unit (OU). Because 129I is an uncommon contaminant, relevant remediation experience and scientific literature are limited, though work is under way to better understand the fate and transport of 129I in the environment and the effectiveness of potential remediation technologies. The recent UP-1 Evaluation Plan for Iodine and report on the Conceptual Model of Iodine Behavior in the Subsurface at the Hanford Sitemore » provide information on the history of contamination in the 200-UP-1 OU, relevant controlling processes (biological and geochemical), risk, the conceptual site model, and potential remedial options, which provided a foundation for this study. In this study, available information was compiled and used to categorize potential remediation technologies, culminating in a recommendation of promising technologies for further evaluation. Approaches to improve the technical information about promising technologies are also recommended in this study so that a subsequent evaluation of potential remediation alternatives can assess these technologies.« less

Mobile phone radiation causes brain tumors and should be classified as a probable human carcinogen (2A) (review).

PubMed

Morgan, L Lloyd; Miller, Anthony B; Sasco, Annie; Davis, Devra Lee

2015-05-01

Quickly changing technologies and intensive uses of radiofrequency electromagnetic field (RF-EMF)‑emitting phones pose a challenge to public health. Mobile phone users and uses and exposures to other wireless transmitting devices (WTDs) have increased in the past few years. We consider that CERENAT, a French national study, provides an important addition to the literature evaluating the use of mobile phones and risk of brain tumors. The CERENAT finding of increased risk of glioma is consistent with studies that evaluated use of mobile phones for a decade or longer and corroborate those that have shown a risk of meningioma from mobile phone use. In CERENAT, exposure to RF‑EMF from digitally enhanced cordless telephones (DECTs), used by over half the population of France during the period of this study, was not evaluated. If exposures to DECT phones could have been taken into account, the risks of glioma from mobile phone use in CERENAT are likely to be higher than published. We conclude that radiofrequency fields should be classified as a Group 2A ̔probable̓ human carcinogen under the criteria used by the International Agency for Research on Cancer (Lyon, France). Additional data should be gathered on exposures to mobile and cordless phones, other WTDs, mobile phone base stations and Wi‑Fi routers to evaluate their impact on public health. We advise that the as low as reasonable achievable (ALARA) principle be adopted for uses of this technology, while a major cross‑disciplinary effort is generated to train researchers in bioelectromagnetics and provide monitoring of potential health impacts of RF‑EMF.

Evaluation systems for clinical governance development: a comparative study.

PubMed

Hooshmand, Elaheh; Tourani, Sogand; Ravaghi, Hamid; Ebrahimipour, Hossein

2014-01-01

Lack of scientific and confirmed researches and expert knowledge about evaluation systems for clinical governance development in Iran have made studies on different evaluation systems for clinical governance development a necessity. These studies must provide applied strategies to design criteria of implementing clinical governance for hospital's accreditation. This is a descriptive and comparative study on development of clinical governance models all over the world. Data have been gathered by reviewing related articles. Models have been studied in comprehensive review method. The evaluated models of clinical governance development were Australian, NHS, SPOCK and OPTIGOV. The final aspects extracted from these models were Responsiveness, Policies and Strategies, Organizational Structure, Allocating Resources, Education and Occupational Development, Performance Evaluation, External Evaluation, Patient Oriented Approach, Risk Management, Personnel's Participation, Information Technology, Human Resources, Research and Development, Evidence Based Medicine, Clinical Audit, Health Technology Assessment and Quality. These results are applicable for completing the present criteria which evaluating clinical governance application and provide practical framework to evaluate country's hospital on the basis of clinical governance elements.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Evaluation of technology to identify and assess overweight children and adolescents.

PubMed

Gance-Cleveland, Bonnie; Gilbert, Lynn H; Kopanos, Taynin; Gilbert, Kevin C

2010-01-01

The current obesity epidemic has produced a generation of children that may be the first to have a life expectancy shorter than their parents. To address the obesity epidemic, experts have published recommendations for providers. Research suggests the publication of guidelines may not change provider behavior. This study evaluates computer assistance for implementing obesity guidelines in school-based health centers. Significant improvements in identification and assessment of obesity in children with technology support were noted. Computer decision support shows promise for promoting the implementation of current recommendations by supporting providers in identifying, assessing, and providing tailored recommendations for children at risk of obesity.

'Mobile' health needs and opportunities in developing countries.

PubMed

Kahn, James G; Yang, Joshua S; Kahn, James S

2010-02-01

Developing countries face steady growth in the prevalence of chronic diseases, along with a continued burden from communicable diseases. "Mobile" health, or m-health-the use of mobile technologies such as cellular phones to support public health and clinical care-offers promise in responding to both types of disease burdens. Mobile technologies are widely available and can play an important role in health care at the regional, community, and individual levels. We examine various m-health applications and define the risks and benefits of each. We find positive examples but little solid evaluation of clinical or economic performance, which highlights the need for such evaluation.

Coal gasification systems engineering and analysis, volume 2

NASA Technical Reports Server (NTRS)

1980-01-01

The major design related features of each generic plant system were characterized in a catalog. Based on the catalog and requirements data, approximately 17 designs and cost estimates were developed for MBG and alternate products. A series of generic trade studies was conducted to support all of the design studies. A set of cost and programmatic analyses were conducted to supplement the designs. The cost methodology employed for the design and sensitivity studies was documented and implemented in a computer program. Plant design and construction schedules were developed for the K-T, Texaco, and B&W MBG plant designs. A generic work breakdown structure was prepared, based on the K-T design, to coincide with TVA's planned management approach. An extensive set of cost sensitivity analyses was completed for K-T, Texaco, and B&W design. Product price competitiveness was evaluated for MBG and the alternate products. A draft management policy and procedures manual was evaluated. A supporting technology development plan was developed to address high technology risk issues. The issues were identified and ranked in terms of importance and tractability, and a plan developed for obtaining data or developing technology required to mitigate the risk.

3D Printing: What Are the Hazards?

PubMed

Randolph, Susan A

2018-03-01

As the popularity of three-dimensional (3D) printers increases, more research will be conducted to evaluate the benefits and risks of this technology. Occupational health professionals should stay abreast of new recommendations to protect workers from exposure to 3D printer emissions.

TOXICITY APPROACHES TO ASSESSING MINING IMPACTS AND MINE WASTE TREATMENT EFFECTIVENESS

EPA Science Inventory

The USEPA Office of Research and Development's National Exposure Research Laboratory and National Risk Management Research Laboratory have been evaluating the impact of mining sites on receiving streams and the effectiveness of waste treatment technologies in removing toxicity fo...

Research notes : detecting objects at railroad crossings.

DOT National Transportation Integrated Search

2004-04-01

The highest risks are at intersections with roadways. An object may fall off of a truck or farm vehicle, or someone may drop something. The goal of this research was to evaluate promising technologies for the detection of such objects at railroad-roa...

Forecast and virtual weather driven plant disease risk modeling system

USDA-ARS?s Scientific Manuscript database

We describe a system in use and development that leverages public weather station data, several spatialized weather forecast types, leaf wetness estimation, generic plant disease models, and online statistical evaluation. Convergent technological developments in all these areas allow, with funding f...

Statistical, epidemiological, and risk-assessment approaches to evaluating safety of vaccines throughout the life cycle at the Food and Drug Administration.

PubMed

Ball, Robert; Horne, Dale; Izurieta, Hector; Sutherland, Andrea; Walderhaug, Mark; Hsu, Henry

2011-05-01

The public health community faces increasing demands for improving vaccine safety while simultaneously increasing the number of vaccines available to prevent infectious diseases. The passage of the US Food and Drug Administration (FDA) Amendment Act of 2007 formalized the concept of life-cycle management of the risks and benefits of vaccines, from early clinical development through many years of use in large numbers of people. Harnessing scientific and technologic advances is necessary to improve vaccine-safety evaluation. The Office of Biostatistics and Epidemiology in the Center for Biologics Evaluation and Research is working to improve the FDA's ability to monitor vaccine safety by improving statistical, epidemiologic, and risk-assessment methods, gaining access to new sources of data, and exploring the use of genomics data. In this article we describe the current approaches, new resources, and future directions that the FDA is taking to improve the evaluation of vaccine safety.

Development of a Frost Risk Assessment Tool in Agriculture for a Mediterranean ecosystem Utilizing MODIS satellite observations Geomatics and Surface Data

NASA Astrophysics Data System (ADS)

Louka, Panagiota; Papanikolaou, Ioannis; Petropoulos, George; Migiros, George; Tsiros, Ioannis

2014-05-01

Frost risk in Mediterranean countries is a critical factor in agricultural planning and management. Nowadays, the rapid technological developments in Earth Observation (EO) technology have improved dramatically our ability to map the spatiotemporal distribution of frost conditions over a given area and evaluate its impacts on the environment and society. In this study, a frost risk model for agricultural crops cultivated in a Mediterranean environment has been developed, based primarily on Earth Observation (EO) data from MODIS sensor and ancillary spatial and point data. The ability of the model to predict frost conditions has been validated for selected days on which frost conditions had been observed for a region in Northwestern Greece according to ground observations obtained by the Agricultural Insurance Organization (ELGA). An extensive evaluation of the frost risk model predictions has been performed herein to evaluate objectively its ability to predict the spatio-temporal distribution of frost risk in the studied region, including comparisons against physiographical factors of the study area. The topographical characteristics that were taken under consideration were latitude, altitude, slope steepness, topographic convergence and the extend of the areas influenced by water bodies (such as lake and sea) existing in the study area. Additional data were also used concerning land use data and vegetation classification (type and density). Our results showed that the model was able to produce reasonably the spatio-temporal distribution of the frost conditions in our study area, following largely explainable patterns in respect to the study site and local weather conditions characteristics. All in all, the methodology implemented herein proved capable in obtaining rapidly and cost-effectively cartography of the frost risk in a Mediterranean environment, making it potentially a very useful tool for agricultural management and planning. The model presented here has also a potential to enhance conventional field-based surveying for monitoring frost changes over long timescales. KEYWORDS: Earth Observation, MODIS, frost, risk assessment, Greece

An Independent Scientific Assessment of Well Stimulation in California Volume I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Birkholzer, Jens

In 2013, the California Legislature passed Senate Bill 4 (SB 4), setting the framework for regulation of well stimulation technologies in California, including hydraulic fracturing. SB 4 also requires the California Natural Resources Agency to conduct an independent scientific study of well stimulation technologies in California to assess current and potential future practices, including the likelihood that well stimulation technologies could enable extensive new petroleum production in the state, evaluate the impacts of well stimulation technologies and the gaps in data that preclude this understanding, identify risks associated with current practices, and identify alternative practices which might limit these risks.more » The study is issued in three volumes. This document, Volume I, provides the factual basis describing well stimulation technologies, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II discusses how well stimulation affects water, the atmosphere, seismic activity, wildlife and vegetation, traffic, light and noise levels; it will also explore human health hazards, and identify data gaps and alternative practices. Volume III presents case studies to assess environmental issues and qualitative« less

N+3 Small Commercial Efficient and Quiet Transportation for Year 2030-2035

NASA Technical Reports Server (NTRS)

DAngelo, Martin M.; Gallman, John; Johnson, Vicki; Garcia, Elena; Tai, Jimmy; Young, Russell

2010-01-01

This study develops a future scenario that enables convenient point-to-point commercial air travel via a large network of community airports and a new class of small airliners. A network demand and capacity study identifies current and future air travel demands and the capacity of this new network to satisfy these demands. A current technology small commercial airliner is defined to meet the needs of the new network, as a baseline for evaluating the improvement brought about by advanced technologies. Impact of this new mode of travel on the infrastructure and surrounding communities of the small airports in this new N+3 network are also evaluated. Year 2030-2035 small commercial airliner technologies are identified and a trade study conducted to evaluate and select those with the greatest potential for enhancing future air travel and the study metrics. The selected advanced air vehicle concept is assessed against the baseline aircraft, and an advanced, but conventional aircraft, and the study metrics. The key technologies of the selected advanced air vehicle are identified, their impact quantified, and risk assessments and roadmaps defined.

Assuring safety without animal testing: Unilever's ongoing research programme to deliver novel ways to assure consumer safety.

PubMed

Westmoreland, Carl; Carmichael, Paul; Dent, Matt; Fentem, Julia; MacKay, Cameron; Maxwell, Gavin; Pease, Camilla; Reynolds, Fiona

2010-01-01

Assuring consumer safety without the generation of new animal data is currently a considerable challenge. However, through the application of new technologies and the further development of risk-based approaches for safety assessment, we remain confident it is ultimately achievable. For many complex, multi-organ consumer safety endpoints, the development, evaluation and application of new, non-animal approaches is hampered by a lack of biological understanding of the underlying mechanistic processes involved. The enormity of this scientific challenge should not be underestimated. To tackle this challenge a substantial research programme was initiated by Unilever in 2004 to critically evaluate the feasibility of a new conceptual approach based upon the following key components: 1.Developing new, exposure-driven risk assessment approaches. 2.Developing new biological (in vitro) and computer-based (in silico) predictive models. 3.Evaluating the applicability of new technologies for generating data (e.g. "omics", informatics) and for integrating new types of data (e.g. systems approaches) for risk-based safety assessment. Our research efforts are focussed in the priority areas of skin allergy, cancer and general toxicity (including inhaled toxicity). In all of these areas, a long-term investment is essential to increase the scientific understanding of the underlying biology and molecular mechanisms that we believe will ultimately form a sound basis for novel risk assessment approaches. Our research programme in these priority areas consists of in-house research as well as Unilever-sponsored academic research, involvement in EU-funded projects (e.g. Sens-it-iv, Carcinogenomics), participation in cross-industry collaborative research (e.g. Colipa, EPAA) and ongoing involvement with other scientific initiatives on non-animal approaches to risk assessment (e.g. UK NC3Rs, US "Human Toxicology Project" consortium).

Understanding patient and provider perceptions and expectations of genomic medicine

PubMed Central

Hall, Michael J; Forman, Andrea; Montgomery, Susan; Rainey, Kim; Daly, Mary B

2014-01-01

Advances in genome sequencing technology have fostered a new era of clinical genomic medicine. Genetic counselors, who have begun to support patients undergoing multi-gene panel testing for hereditary cancer risk, will review brief clinical vignettes, and discuss early experiences with clinical genomic testing. Their experiences will frame a discussion about how current testing may challenge patient understanding and expectations toward the evaluation of cancer risk and downstream preventive behaviors. PMID:24992205

Evaluating and Mitigating Software Supply Chain Security Risks

DTIC Science & Technology

2010-05-01

is returned for all employees. The risk associated with this defect is high; variants of it have been used in attacks that caused credit card data to...via Common Access Card (CAC) readers). 29 | CMU/SEI-2010-TN-016 4.2.1 Supplier Capability Because the project is already in development, the...ClearCase, Windows, Linux and Solaris, network administration, TCP/IP, X/Motif, DII COE, Simple Net- work Management Protocol (SNMP), Agent Technology

Ending the use of animals in toxicity testing and risk evaluation.

PubMed

Rowan, Andrew N

2015-10-01

This article discusses the use of animals for the safety testing of chemicals, including pharmaceuticals, household products, pesticides, and industrial chemicals. It reviews changes in safety testing technology and what those changes mean from the perspective of industrial innovation, public policy and public health, economics, and ethics. It concludes that the continuing use of animals for chemical safety testing should end within the decade as cheaper, quicker, and more predictive technologies are developed and applied.

Stochastic Simulation Using @ Risk for Dairy Business Investment Decisions

USDA-ARS?s Scientific Manuscript database

A dynamic, stochastic, mechanistic simulation model of a dairy business was developed to evaluate the cost and benefit streams coinciding with technology investments. The model was constructed to embody the biological and economical complexities of a dairy farm system within a partial budgeting fram...

Flight Projects Office Information Systems Testbed (FIST)

NASA Technical Reports Server (NTRS)

Liggett, Patricia

1991-01-01

Viewgraphs on the Flight Projects Office Information Systems Testbed (FIST) are presented. The goal is to perform technology evaluation and prototyping of information systems to support SFOC and JPL flight projects in order to reduce risk in the development of operational data systems for such projects.

Long-term follow-up of children conceived through assisted reproductive technology.

PubMed

Lu, Yue-hong; Wang, Ning; Jin, Fan

2013-05-01

Children conceived via assisted reproductive technologies (ART) are nowadays a substantial proportion of the population. It is important to follow up these children and evaluate whether they have elevated health risks compared to naturally conceived (NC) children. In recent years there has been a lot of work in this field. This review will summarize what is known about the health of ART-conceived children, encompassing neonatal outcomes, birth defects, growth and gonadal developments, physical health, neurological and neurodevelopmental outcomes, psychosocial developments, risk for cancer, and epigenetic abnormalities. Most of the children conceived after ART are normal. However, there is increasing evidence that ART-conceived children are at higher risk of poor perinatal outcome, birth defects, and epigenetic disorders, and the mechanism(s) leading to these changes have not been elucidated. Continuous follow-up of children after ART is of great importance as they progress through adolescence into adulthood, and new ART techniques are constantly being introduced.

Environmental release of living modified organisms: current approaches and case studies.

PubMed

Thomas, E; Nickson, Ph D

2005-01-01

Agricultural biotechnology is being rapidly adopted as evidenced by the acreage of genetically modified (GM) crops planted and tonnes of product (grain and fiber) harvested. Concurrent with this technological progress, is a growing concern that the worlds biological diversity is coming under increasing threat from human activities. As such, ecological risk assessment approaches are being developed for GM crop plants as international agreements regulating the transboundary movements of these products are being implemented. This paper reviews the ecological risk assessment approach that has been used to date to approve GM crops to date. The process has been case-by-case, using a comparative, science-based approach balancing the potential risks and benefits of the new technology versus those present with the currently accepted practices. The approach used to evaluate and approve these products is consistent with the conditions and requirements outlined in the Cartagena Protocol.

Study of Multimission Modular Spacecraft (MMS) propulsion requirements

NASA Technical Reports Server (NTRS)

Fischer, N. H.; Tischer, A. E.

1977-01-01

The cost effectiveness of various propulsion technologies for shuttle-launched multimission modular spacecraft (MMS) missions was determined with special attention to the potential role of ion propulsion. The primary criterion chosen for comparison for the different types of propulsion technologies was the total propulsion related cost, including the Shuttle charges, propulsion module costs, upper stage costs, and propulsion module development. In addition to the cost comparison, other criteria such as reliability, risk, and STS compatibility are examined. Topics covered include MMS mission models, propulsion technology definition, trajectory/performance analysis, cost assessment, program evaluation, sensitivity analysis, and conclusions and recommendations.

[Spatiotemporal dynamic fuzzy evaluation of wetland environmental pollution risk in Dayang estuary of Liaoning Province, Northeast China based on remote sensing].

PubMed

Sun, Yong-Guang; Zhao, Dong-Zhi; Zhang, Feng-Shou; Wei, Bao-Quan; Chu, Jia-Lan; Su, Xiu

2012-11-01

Based on the aerial image data of Dayang estuary in 2008, and by virtue of Analytic Hierarchy Process (AHP) , remote sensing technology, and GIS spatial analysis, a spatiotemporal evaluation was made on the comprehensive level of wetland environmental pollution risk in Dayang estuary, with the impacts of typical human activities on the dynamic variation of this comprehensive level discussed. From 1958 to 2008, the comprehensive level of the environmental pollution risk in study area presented an increasing trend. Spatially, this comprehensive level declined from land to ocean, and showed a zonal distribution. Tourism development activities unlikely led to the increase of the comprehensive level, while human inhabitation, transportation, and aquaculture would exacerbate the risk of environmental pollution. This study could provide reference for the sea area use planning, ecological function planning, and pollutants control of estuary region.

Interest in use of mHealth technology in HIV prevention and associated factors among high-risk drug users enrolled in methadone maintenance program.

PubMed

Shrestha, Roman; Karki, Pramila; Copenhaver, Michael

2017-09-01

The adoption of mobile technologies for health (mHealth) in healthcare has grown considerably in recent years, but systematic assessment of interest in the use of mHealth in HIV prevention efforts among people who use drugs (PWUD) is lacking. We therefore examined interest in use of mHealth technology in HIV prevention and associated individual-level factors among high-risk PWUD enrolled in methadone maintenance program. A total of 400 HIV-negative PWUD, who reported drug- and/or sex-related risk behaviors completed a standardized assessment using audio computer assisted self-interview (ACASI). Results revealed significant interest in using mHealth-based approaches for specific purposes, including: to receive medication reminders (72.3%), to receive information about HIV risk reduction (65.8%), and to assess HIV risk behaviors (76.5%). Multivariate analysis showed that interest in receiving medication reminders was associated with currently taking medication and being neurocognitively impaired, whereas interest in receiving HIV-risk reduction information was associated with being non-white, married, and perceiving the person was at high-risk for contracting HIV. Similarly, participants' interested in using mHealth for HIV risk behavior assessment was associated with having recently visited a healthcare provider and exhibiting depressive symptoms. Overall, this study demonstrated that high-risk PWUD are interested in using mHealth-based tools as a key part of an HIV prevention approach within a common type of drug treatment settings. Thus, formative research on preferences for design and functionality of mHealth-based HIV prevention tools are now needed, followed by practical development, implementation, and evaluation of these new intervention strategies.

A critical evaluation of two point-of-use water treatment technologies: can they provide water that meets WHO drinking water guidelines?

PubMed

Murphy, Heather M; McBean, Edward A; Farahbakhsh, Khosrow

2010-12-01

Point-of-use (POU) technologies have been proposed as solutions for meeting the Millennium Development Goal (MDG) for safe water. They reduce the risk of contamination between the water source and the home, by providing treatment at the household level. This study examined two POU technologies commonly used around the world: BioSand and ceramic filters. While the health benefits in terms of diarrhoeal disease reduction have been fairly well documented for both technologies, little research has focused on the ability of these technologies to treat other contaminants that pose health concerns, including the potential for formation of contaminants as a result of POU treatment. These technologies have not been rigorously tested to see if they meet World Health Organization (WHO) drinking water guidelines. A study was developed to evaluate POU BioSand and ceramic filters in terms of microbiological and chemical quality of the treated water. The following parameters were monitored on filters in rural Cambodia over a six-month period: iron, manganese, fluoride, nitrate, nitrite and Escherichia coli. The results revealed that these technologies are not capable of consistently meeting all of the WHO drinking water guidelines for these parameters.

How medical technologies shape the experience of illness.

PubMed

Hofmann, Bjørn; Svenaeus, Fredrik

2018-02-03

In this article we explore how diagnostic and therapeutic technologies shape the lived experiences of illness for patients. By analysing a wide range of examples, we identify six ways that technology can (trans)form the experience of illness (and health). First, technology may create awareness of disease by revealing asymptomatic signs or markers (imaging techniques, blood tests). Second, the technology can reveal risk factors for developing diseases (e.g., high blood pressure or genetic tests that reveal risks of falling ill in the future). Third, the technology can affect and change an already present illness experience (e.g., the way blood sugar measurement affects the perceived symptoms of diabetes). Fourth, therapeutic technologies may redefine our experiences of a certain condition as diseased rather than unfortunate (e.g. assisted reproductive technologies or symptom based diagnoses in psychiatry). Fifth, technology influences illness experiences through altering social-cultural norms and values regarding various diagnoses. Sixth, technology influences and changes our experiences of being healthy in contrast and relation to being diseased and ill. This typology of how technology forms illness and related conditions calls for reflection regarding the phenomenology of technology and health. How are medical technologies and their outcomes perceived and understood by patients? The phenomenological way of approaching illness as a lived, bodily being-in-the-world is an important approach for better understanding and evaluating the effects that medical technologies may have on our health, not only in defining, diagnosing, or treating diseases, but also in making us feel more vulnerable and less healthy in different regards.

Association Between Endometriosis and Preterm Birth in Women With Spontaneous Conception or Using Assisted Reproductive Technology: A Systematic Review and Meta-Analysis of Cohort Studies.

PubMed

Pérez-López, Faustino R; Villagrasa-Boli, Pablo; Muñoz-Olarte, María; Morera-Grau, Álex; Cruz-Andrés, Pablo; Hernandez, Adrian V

2018-03-01

To perform a systematic review and meta-analysis to estimate the effect of endometriosis on preterm birth (PB) risk. Searches were conducted in PubMed-MEDLINE, Embase, Scopus, Web of Science, Cochrane Library, Google Scholar, and SciELO for studies published in all languages from inception through April 2017. We included cohort studies evaluating pregnant women with and without endometriosis and conception either by spontaneous conception (SC) or with assisted reproductive technology (ART). Primary outcome was PB (<37 weeks), and secondary outcomes were intrauterine growth restriction (IUGR), low birthweight, small for gestational age (SGA), and birthweight. Pooled odds ratios (ORs) and its 95% confidence interval (CI) were calculated as effects, and random-effects models were used for meta-analyses. Risk of bias was assessed with the Newcastle-Ottawa Scale, and heterogeneity of effects among studies was described with the I 2 statistic. We identified 9 cohort studies including a total of 1 496 715 pregnancies (13 798 with endometriosis diagnosis). In women with endometriosis, the PB risk was significantly increased in both SC (OR: 1.59; 95% CI: 1.32-1.90) and ART (OR: 1.43; 95% CI: 1.14-1.79). The SGA risk was increased in women with endometriosis (OR: 1.16; 95% CI: 1.05-1.28), while the IUGR and low birthweight risks and birthweight were not affected by endometriosis. Endometriosis is associated with increased PB risk in both SC and women who obtained pregnancy using ART. Prospective studies evaluating relevant outcomes are needed to confirm these results.

Coal gasification systems engineering and analysis. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1980-01-01

Feasibility analyses and systems engineering studies for a 20,000 tons per day medium Btu (MBG) coal gasification plant to be built by TVA in Northern Alabama were conducted. Major objectives were as follows: (1) provide design and cost data to support the selection of a gasifier technology and other major plant design parameters, (2) provide design and cost data to support alternate product evaluation, (3) prepare a technology development plan to address areas of high technical risk, and (4) develop schedules, PERT charts, and a work breakdown structure to aid in preliminary project planning. Volume one contains a summary of gasification system characterizations. Five gasification technologies were selected for evaluation: Koppers-Totzek, Texaco, Lurgi Dry Ash, Slagging Lurgi, and Babcock and Wilcox. A summary of the trade studies and cost sensitivity analysis is included.

The impact of science and technology on the civilization.

PubMed

Arber, Werner

2009-01-01

The rapid increase of available scientific knowledge is largely due to the introduction of novel research strategies. The application of these strategies, both in fundamental and in translational scientific research, leads to bursts of technological innovations. In order to fulfill the justified public request for sustainability of technological innovations that contribute to the shaping of the future, increasing attention should be given to science-based technology and policy assessment. These requests are illustrated by benefit/risk evaluations of relevance for the use of genetic engineering as an efficient and effective research strategy. Expected benefits of a responsibly planned introduction of GM crops are outlined as a prospective example for the guiding theme "Biotechnology for sustainability of human society".

Fission Surface Power System Initial Concept Definition

NASA Technical Reports Server (NTRS)

2010-01-01

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk Reduction the team develops hardware prototypes and conducts laboratory-based testing.

Risk assessment and risk management of mycotoxins.

PubMed

2012-01-01

Risk assessment is the process of quantifying the magnitude and exposure, or probability, of a harmful effect to individuals or populations from certain agents or activities. Here, we summarize the four steps of risk assessment: hazard identification, dose-response assessment, exposure assessment, and risk characterization. Risk assessments using these principles have been conducted on the major mycotoxins (aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, and zearalenone) by various regulatory agencies for the purpose of setting food safety guidelines. We critically evaluate the impact of these risk assessment parameters on the estimated global burden of the associated diseases as well as the impact of regulatory measures on food supply and international trade. Apart from the well-established risk posed by aflatoxins, many uncertainties still exist about risk assessments for the other major mycotoxins, often reflecting a lack of epidemiological data. Differences exist in the risk management strategies and in the ways different governments impose regulations and technologies to reduce levels of mycotoxins in the food-chain. Regulatory measures have very little impact on remote rural and subsistence farming communities in developing countries, in contrast to developed countries, where regulations are strictly enforced to reduce and/or remove mycotoxin contamination. However, in the absence of the relevant technologies or the necessary infrastructure, we highlight simple intervention practices to reduce mycotoxin contamination in the field and/or prevent mycotoxin formation during storage.

The estimated risk for coronary heart disease and prevalence of dyslipidemia among workers of information technology industries in Taiwan.

PubMed

Yang, Shao-Chi; Chien, Kuo-Liong; Tsai, Wei-I; Ho, Yi-Lwun; Chen, Ming-Fong

2011-03-18

Individuals working in information technology (IT) industries suffer from high work stress, possibly causing adverse impacts on their health. However, studies of cardiovascular risk factors among these workers are lacking. The aims of this study were to evaluate the estimated risk for coronary heart disease (CHD) and prevalence of dyslipidemia among IT workers. A total of 941 employees from 11 IT companies were enrolled and the anthropometrics and serum lipid profiles were measured. The 10-year risk for CHD was calculated based on the Framingham risk score. Compared with lipid profiles in a representative sample (n=6589), IT workers had a significantly higher prevalence of obesity, hypercholesterolemia, low level of HDL-C, and high level of LDL-C in each age group. Their overall estimated 10-year risk for CHD was higher than the average risk of an age- and gender-matched population (2.91% vs. 2.79%, p=0.027). Working for more than 10h/day was associated with a higher estimated CHD risk (3.62% vs. 2.54%, p<0.01). A higher prevalence of hyperlipidemia was noted among IT workers. Their estimated 10-year CHD risk was also higher than average. More aggressive interventions to reduce the risk of CHD in this population are needed. Copyright © 2010 Elsevier B.V. All rights reserved.

From design to implementation - The Joint Asia Diabetes Evaluation (JADE) program: A descriptive report of an electronic web-based diabetes management program

PubMed Central

2010-01-01

Background The Joint Asia Diabetes Evaluation (JADE) Program is a web-based program incorporating a comprehensive risk engine, care protocols, and clinical decision support to improve ambulatory diabetes care. Methods The JADE Program uses information technology to facilitate healthcare professionals to create a diabetes registry and to deliver an evidence-based care and education protocol tailored to patients' risk profiles. With written informed consent from participating patients and care providers, all data are anonymized and stored in a databank to establish an Asian Diabetes Database for research and publication purpose. Results The JADE electronic portal (e-portal: http://www.jade-adf.org) is implemented as a Java application using the Apache web server, the mySQL database and the Cocoon framework. The JADE e-portal comprises a risk engine which predicts 5-year probability of major clinical events based on parameters collected during an annual comprehensive assessment. Based on this risk stratification, the JADE e-portal recommends a care protocol tailored to these risk levels with decision support triggered by various risk factors. Apart from establishing a registry for quality assurance and data tracking, the JADE e-portal also displays trends of risk factor control at each visit to promote doctor-patient dialogues and to empower both parties to make informed decisions. Conclusions The JADE Program is a prototype using information technology to facilitate implementation of a comprehensive care model, as recommended by the International Diabetes Federation. It also enables health care teams to record, manage, track and analyze the clinical course and outcomes of people with diabetes. PMID:20465815

Magnetic Resonance Imaging as an Adjunct to Mammography for Breast Cancer Screening in Women at Less Than High Risk for Breast Cancer: A Health Technology Assessment

PubMed Central

Nikitovic-Jokic, Milica; Holubowich, Corinne

2016-01-01

Background Screening with mammography can detect breast cancer early, before clinical symptoms appear. Some cancers, however, are not captured with mammography screening alone. Among women at high risk for breast cancer, magnetic resonance imaging (MRI) has been suggested as a safe adjunct (supplemental) screening tool that can detect breast cancers missed on screening mammography, potentially reducing the number of deaths associated with the disease. However, the use of adjunct screening tests may also increase the number of false-positive test results, which may lead to unnecessary follow-up testing, as well as patient stress and anxiety. We investigated the benefits and harms of MRI as an adjunct to mammography compared with mammography alone for screening women at less than high risk (average or higher than average risk) for breast cancer. Methods We searched Ovid MEDLINE, Ovid Embase, Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects (DARE), Centre for Reviews and Dissemination (CRD) Health Technology Assessment Database, and National Health Service (NHS) Economic Evaluation Database, from January 2002 to January 2016, for evidence of effectiveness, harms, and diagnostic accuracy. Only studies evaluating the use of screening breast MRI as an adjunct to mammography in the specified populations were included. Results No studies in women at less than high risk for breast cancer met our inclusion criteria. Conclusions It remains uncertain if the use of adjunct screening breast MRI in women at less than high risk (average or higher than average risk) for breast cancer will reduce breast cancer–related mortality without significant increases in unnecessary follow-up testing and treatment. PMID:27990198

ACTIVE AND SEMI-PASSIVE LIME TREATMENT OF ACID MINE DRAINAGE AT LEVIATHAN MINE, CALIFORNIA CAPSULE

EPA Science Inventory

As part of the Superfund Innovative Technology Evaluation (SITE) program, U.S. Environmental Protection Agency (EPA), National Risk Management Research Laboratory (NRMRL), in cooperation with EPA Region IX, the state of California, and the Atlantic Richfield Company (ARCO) evalua...

ACTIVE AND SEMI-PASSIVE LIME TREATMENT OF ACID MINE DRAINAGE AT LEVIATHAN MINE, CALIFORNIA BULLETIN

EPA Science Inventory

As part of the Superfund Innovative Technology Evaluation (SITE) program, U.S. Environmental Protection Agency (EPA) National Risk Management Research Laboratory (NRMRL), in cooperation with EPA Region IX, the state of California, and the Atlantic Richfield Company (ARCO) evaluat...

EFFECT OF PITTING CORROSION PROMOTERS ON THE TREATMENT OF WATERS CONTAMINATED WITH A NITROAROMATIC COMPOUNDS USING INTEGRATED REDUCTIVE/OXIDATIVE PROCESSES

EPA Science Inventory

All the reaction mechanisms developed during the proposed research activities will provide essential information during risk assessment and evaluation of remediation strategies of NACs contamination. The concept of integrated reductive/oxidative technologies. exper...

IMMUNOTOXICOGENOMICS: THE POTENTIAL OF GENOMICS TECHNOLOGY IN THE IMMUNOTOXICITY RISK ASSESSMENT PROCESS

EPA Science Inventory

Evaluation of xenobiotic-induced changes in gene expression as a method to identify and classify potential toxicants is being pursued by industry and regulatory agencies worldwide. A workshop was held at the Research Triangle Park campus of the Environmental Protection Agency to...

Feasibility study of tank leakage mitigation using subsurface barriers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Treat, R.L.; Peters, B.B.; Cameron, R.J.

1994-09-21

The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulatingmore » air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.« less

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

PubMed

Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

2016-08-01

Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories. Copyright © 2016 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Economic Evaluation of the Information Security Levels Achieved by Electric Energy Providers in North Arctic Region

NASA Astrophysics Data System (ADS)

Sushko, O. P.; Kaznin, A. A.; Babkin, A. V.; Bogdanov, D. A.

2017-10-01

The study we are conducting involves the analysis of information security levels achieved by energy providers operating in the North Arctic Region. We look into whether the energy providers’ current information security levels meet reliability standards and determine what further actions may be needed for upgrading information security in the context of the digital transformation that the world community is undergoing. When developing the information security systems for electric energy providers or selecting the protection means for them, we are governed by the fact that the assets to be protected are process technologies. While information security risk can be assessed using different methods, the evaluation of the economic damage from these risks appears to be a difficult task. The most probable and harmful risks we have identified when evaluating the electric energy providers’ information security will be used by us as variables. To provide the evaluation, it is necessary to calculate the costs relating to elimination of the risks identified. The final stage of the study will involve the development of an operation algorithm for the North Arctic Region’s energy provider’s business information protection security system - a set of information security services, and security software and hardware.

Understanding patient and provider perceptions and expectations of genomic medicine.

PubMed

Hall, Michael J; Forman, Andrea D; Montgomery, Susan V; Rainey, Kim L; Daly, Mary B

2015-01-01

Advances in genome sequencing technology have fostered a new era of clinical genomic medicine. Genetic counselors, who have begun to support patients undergoing multi-gene panel testing for hereditary cancer risk, will review brief clinical vignettes, and discuss early experiences with clinical genomic testing. Their experiences will frame a discussion about how current testing may challenge patient understanding and expectations toward the evaluation of cancer risk and downstream preventive behaviors. © 2014 Wiley Periodicals, Inc.

Need for outcomes research in evaluating the benefit of new health care technology

NASA Astrophysics Data System (ADS)

Fendrick, A. Mark

1994-12-01

Despite the remarkable advances conferred to the health care system, technological innovation is often pointed out as an important `culprit' behind the astonishing increases in medical care expenditures. Until cost constraint became an issue of national significance, innovations that offered any potential health benefit rapidly diffused within the United States medical community--indifferent to the amount of resources expended. This pattern of adoption was driven by generous coverage policies of third-party payers that frequently did not require proof of effectiveness for reimbursement. Recently, attention has turned to the outcomes evaluation of medical interventions; assessing not only patient safety, but critically examining the risks and benefits, measured in clinical benefits and resource costs.

Human System Drivers for Exploration Missions

NASA Technical Reports Server (NTRS)

Kundrot, Craig E.; Steinberg, Susan; Charles, John B.

2010-01-01

Evaluation of DRM4 in terms of the human system includes the ability to meet NASA standards, the inclusion of the human system in the design trade space, preparation for future missions and consideration of a robotic precursor mission. Ensuring both the safety and the performance capability of the human system depends upon satisfying NASA Space Flight Human System Standards.1 These standards in turn drive the development of program-specific requirements for Near-earth Object (NEO) missions. In evaluating DRM4 in terms of these human system standards, the currently existing risk models, technologies and biological countermeasures were used. A summary of this evaluation is provided below in a structure that supports a mission architecture planning activities. 1. Unacceptable Level of Risk The duration of the DRM4 mission leads to an unacceptable level of risk for two aspects of human system health: A. The permissible exposure limit for space flight radiation exposure (a human system standard) would be exceeded by DRM4. B. The risk of visual alterations and abnormally high intracranial pressure would be too high. 1

European solvent industry group generic exposure scenario risk and exposure tool

PubMed Central

Zaleski, Rosemary T; Qian, Hua; Zelenka, Michael P; George-Ares, Anita; Money, Chris

2014-01-01

The European Solvents Industry Group (ESIG) Generic Exposure Scenario (GES) Risk and Exposure Tool (EGRET) was developed to facilitate the safety evaluation of consumer uses of solvents, as required by the European Union Registration, Evaluation and Authorization of Chemicals (REACH) Regulation. This exposure-based risk assessment tool provides estimates of both exposure and risk characterization ratios for consumer uses. It builds upon the consumer portion of the European Center for Ecotoxicology and Toxicology of Chemicals (ECETOC) Targeted Risk Assessment (TRA) tool by implementing refinements described in ECETOC TR107. Technical enhancements included the use of additional data to refine scenario defaults and the ability to include additional parameters in exposure calculations. Scenarios were also added to cover all frequently encountered consumer uses of solvents. The TRA tool structure was modified to automatically determine conditions necessary for safe use. EGRET reports results using specific standard phrases in a format consistent with REACH exposure scenario guidance, in order that the outputs can be readily assimilated within safety data sheets and similar information technology systems. Evaluation of tool predictions for a range of commonly encountered consumer uses of solvents found it provides reasonable yet still conservative exposure estimates. PMID:23361440

European solvent industry group generic exposure scenario risk and exposure tool.

PubMed

Zaleski, Rosemary T; Qian, Hua; Zelenka, Michael P; George-Ares, Anita; Money, Chris

2014-01-01

The European Solvents Industry Group (ESIG) Generic Exposure Scenario (GES) Risk and Exposure Tool (EGRET) was developed to facilitate the safety evaluation of consumer uses of solvents, as required by the European Union Registration, Evaluation and Authorization of Chemicals (REACH) Regulation. This exposure-based risk assessment tool provides estimates of both exposure and risk characterization ratios for consumer uses. It builds upon the consumer portion of the European Center for Ecotoxicology and Toxicology of Chemicals (ECETOC) Targeted Risk Assessment (TRA) tool by implementing refinements described in ECETOC TR107. Technical enhancements included the use of additional data to refine scenario defaults and the ability to include additional parameters in exposure calculations. Scenarios were also added to cover all frequently encountered consumer uses of solvents. The TRA tool structure was modified to automatically determine conditions necessary for safe use. EGRET reports results using specific standard phrases in a format consistent with REACH exposure scenario guidance, in order that the outputs can be readily assimilated within safety data sheets and similar information technology systems. Evaluation of tool predictions for a range of commonly encountered consumer uses of solvents found it provides reasonable yet still conservative exposure estimates.

Influence of paternal age on perinatal outcomes.

PubMed

Hurley, Emily G; DeFranco, Emily A

2017-11-01

There is an increasing trend to delay childbearing to advanced parental age. Increased risks of advanced maternal age and assisted reproductive technologies are widely accepted. There are limited data regarding advanced paternal age. To adequately counsel patients on risk, more research regarding advanced paternal age is necessary. We sought to determine the influence of paternal age on perinatal outcomes, and to assess whether this influence differs between pregnancies achieved spontaneously and those achieved with assisted reproductive technology. A population-based retrospective cohort study of all live births in Ohio from 2006 through 2012 was completed. Data were evaluated to determine if advanced paternal age is associated with an increased risk of adverse outcomes in pregnancies. The analysis was stratified by status of utilization of assisted reproductive technology. Generalized linear regression models assessed the association of paternal age on pregnancy complications in assisted reproductive technology and spontaneously conceived pregnancies, after adjusting for maternal age, race, multifetal gestation, and Medicaid status, using Stata software (Stata, Release 12; StataCorp, College Station, TX). Paternal age was documented in 82.2% of 1,034,552 live births in Ohio during the 7-year study period. Paternal age ranged from 12-87 years, with a median of 30 (interquartile range, 26-35) years. Maternal age ranged from 11-62 years, with a median of 27 (interquartile range, 22-31) years. The use of assisted reproductive technology in live births increased as paternal age increased: 0.1% <30 years vs 2.5% >60 years, P < .001. After accounting for maternal age and other confounding risk factors, increased paternal age was not associated with a significant increase in the rate of preeclampsia, preterm birth, fetal growth restriction, congenital anomaly, genetic disorder, or neonatal intensive care unit admission. The influence of paternal age on pregnancy outcomes was similar in pregnancies achieved with and without assisted reproductive technology. Older paternal age does not appear to pose an independent risk of adverse perinatal outcomes, in pregnancies achieved either with or without assisted reproductive technology. However, small effect sizes such as very small risk increases or decreases may not be detectable despite the large sample size in this study of >830,000 births. Copyright © 2017 Elsevier Inc. All rights reserved.

Fetal aneuploidy detection by maternal plasma DNA sequencing: a technology assessment.

PubMed

Walsh, Judith M E; Goldberg, James D

2013-06-01

The American College of Obstetricians and Gynecologists currently recommends that all pregnant women be offered screening for chromosomal abnormalities, regardless of maternal age. Traditional screening tests have detection rates ranging from 85% to 90% and false-positive rates of 3% to 5%. A woman with an abnormal noninvasive test is offered a diagnostic test, but diagnostic tests are associated with a risk of pregnancy loss. Recently, analysis of cell-free fetal DNA (cffDNA) in maternal blood has been shown to have potential for the accurate detection of some of the common fetal autosomal aneuploidies. As part of a technology assessment for the California Technology Assessment Forum, we critically reviewed the evidence for the use of cffDNA as a prenatal screening test. We evaluated the evidence for its use as either a 'primary' or an 'advanced' screening test and for its use in screening for three different trisomies: 21, 18, and 13. We evaluated whether the use of cffDNA met established technology assessment criteria and established conclusions about evidence-based use of this new technology. © 2013 John Wiley & Sons, Ltd.

Are We There Yet? ... Developing In Situ Fabrication and Repair (ISFR) Technologies to Explore and Live on the Moon and Mars

NASA Technical Reports Server (NTRS)

Bodiford, Melanie P.; Gilley, Scott D.; Howard, Richard W.; Kennedy, James P.; Ray, Julie A.

2005-01-01

NASA's human exploration initiative poses great opportunity and great risk for manned missions to the Moon and Mars. Engineers and Scientists at the Marshall Space Flight Center (MSFC) are evaluating current technologies for in situ resource-based exploration fabrication and repair applications. Several technologies to be addressed in this paper have technology readiness levels (TRLs) that are currently mature enough to pursue for exploration purposes. However, many technologies offer promising applications but these must be pulled along by the demands and applications of this great initiative. The In Situ Fabrication and Repair (ISFR) Element will supply and push state of the art technologies for applications such as habitat structure development, in situ resource utilization for tool and part fabrication, and repair and replacement of common life support elements, as well as non-destructive evaluation. This paper will address current rapid prototyping technologies, their ISFR applications and near term advancements. We will discuss the anticipated need to utilize in situ resources to produce replacement parts and fabricate repairs to vehicles, habitats, life support and quality of life elements. Many ISFR technology developments will incorporate automated deployment and robotic construction and fabrication techniques. The current state of the art for these applications is fascinating, but the future is out of this world.

Evaluating Bone Loss in ISS Astronauts.

PubMed

Sibonga, Jean D; Spector, Elisabeth R; Johnston, Smith L; Tarver, William J

2015-12-01

The measurement of bone mineral density (BMD) by dual-energy X-ray absorptiometry (DXA) is the Medical Assessment Test used at the NASA Johnson Space Center to evaluate whether prolonged exposure to spaceflight increases the risk for premature osteoporosis in International Space Station (ISS) astronauts. The DXA scans of crewmembers' BMD during the first decade of the ISS existence showed precipitous declines in BMD for the hip and spine after the typical 6-mo missions. However, a concern exists that skeletal integrity cannot be sufficiently assessed solely by DXA measurement of BMD. Consequently, use of relatively new research technologies is being proposed to NASA for risk surveillance and to enhance long-term management of skeletal health in long-duration astronauts. Sibonga JD, Spector ER, Johnston SL, Tarver WJ. Evaluating bone loss in ISS astronauts.

STochastic Analysis of Technical Systems (STATS): A model for evaluating combined effects of multiple uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kranz, L.; VanKuiken, J.C.; Gillette, J.L.

1989-12-01

The STATS model, now modified to run on microcomputers, uses user- defined component uncertainties to calculate composite uncertainty distributions for systems or technologies. The program can be used to investigate uncertainties for a single technology on to compare two technologies. Although the term technology'' is used throughout the program screens, the program can accommodate very broad problem definitions. For example, electrical demand uncertainties, health risks associated with toxic material exposures, or traffic queuing delay times can be estimated. The terminology adopted in this version of STATS reflects the purpose of the earlier version, which was to aid in comparing advancedmore » electrical generating technologies. A comparison of two clean coal technologies in two power plants is given as a case study illustration. 7 refs., 35 figs., 7 tabs.« less

IT Operational Risk Measurement Model Based on Internal Loss Data of Banks

NASA Astrophysics Data System (ADS)

Hao, Xiaoling

Business operation of banks relies increasingly on information technology (IT) and the most important role of IT is to guarantee the operational continuity of business process. Therefore, IT Risk management efforts need to be seen from the perspective of operational continuity. Traditional IT risk studies focused on IT asset-based risk analysis and risk-matrix based qualitative risk evaluation. In practice, IT risk management practices of banking industry are still limited to the IT department and aren't integrated into business risk management, which causes the two departments to work in isolation. This paper presents an improved methodology for dealing with IT operational risk. It adopts quantitative measurement method, based on the internal business loss data about IT events, and uses Monte Carlo simulation to predict the potential losses. We establish the correlation between the IT resources and business processes to make sure risk management of IT and business can work synergistically.

Clinical Biophysics; A New Concept in Undergraduate Medical Education.

ERIC Educational Resources Information Center

Anbar, Michael

1981-01-01

The abilities to understand medical technology, to evaluate new devices and procedures, and to assess their effectiveness, reliability, costs, and risks in comparison with existing methods are discussed. A course in clinical biophysics offered at the State University of New York at Buffalo is described. (Author/MLW)

Environmental Technology Verification Report for Abraxis Ecologenia® Ethynylestradiol (EE2) Microplate Enzyme-Linked Immunosorbent Assay (ELISA) Test Kits

EPA Science Inventory

The EPA's National Risk Management Research Laboratory (NRMRL) and its verification organization partner, Battelle, operate the Advanced Monitoring Systems (AMS) Center under ETV. The AMS Center recently evaluated the performance of the Abraxis Ecologenia Ethynylestradiol (EE2) ...

Refrigerated fruit juices: quality and safety issues.

PubMed

Esteve, Maria Jose; Frígola, Ana

2007-01-01

Fruit juices are an important source of bioactive compounds, but techniques used for their processing and subsequent storage may cause alterations in their contents so they do not provide the benefits expected by the consumer. In recent years consumers have increasingly sought so-called "fresh" products (like fresh products), stored in refrigeration. This has led the food industry to develop alternative processing technologies to produce foods with a minimum of nutritional, physicochemical, or organoleptic changes induced by the technologies themselves. Attention has also focused on evaluating the microbiological or toxicological risks that may be involved in applying these processes, and their effect on food safety, in order to obtain safe products that do not present health risks. This concept of minimal processing is currently becoming a reality with conventional technologies (mild pasteurization) and nonthermal technologies, some recently introduced (pasteurization by high hydrostatic pressure) and some perhaps with a more important role in the future (pulsed electric fields). Nevertheless, processing is not the only factor that affects the quality of these products. It is also necessary to consider the conditions for refrigerated storage and to control time and temperature.

Reconnaissance Of The Year 2000 And Beyond

NASA Astrophysics Data System (ADS)

Dresser, M. M.

1981-12-01

The reconnaissance systems of the year 2000 and beyond may be merely an extension of current technology or may utilize bold new technology and concepts still in the embryonic stages. The five basic reconnaissance mission stages: collection, processing, interpretation, reporting, and dissemination, are reviewed in terms of the potential application of new and emerging technology such as high density multispectral focal plane arrays, new radar techniques, VLSI/VHSIC computational resources, artificial intelligence, multisensor integration, pattern and target recognition, image compression, advanced display and targeting techniques, and even new fields not thought of as exact sciences today. The application of these technologies is viewed in the context of the reconnaissance missions: targeting, damage assessment, order of battle assessment, terrain evaluation and planning. The traditional neeos for varying levels of detail and timeliness of reconnaissance data are shown to be largely removed by the use of the most advanced and highest development risk systems. Lower development risk systems show excellent capabilities with the potential for high capability at low cost. New fields may totally change or even eliminate reconnaissance as we know it today.

Annual research review: Harms experienced by child users of online and mobile technologies: the nature, prevalence and management of sexual and aggressive risks in the digital age.

PubMed

Livingstone, Sonia; Smith, Peter K

2014-06-01

The usage of mobile phones and the internet by young people has increased rapidly in the past decade, approaching saturation by middle childhood in developed countries. Besides many benefits, online content, contact or conduct can be associated with risk of harm; most research has examined whether aggressive or sexual harms result from this. We examine the nature and prevalence of such risks, and evaluate the evidence regarding the factors that increase or protect against harm resulting from such risks, so as to inform the academic and practitioner knowledge base. We also identify the conceptual and methodological challenges encountered in this relatively new body of research, and highlight the pressing research gaps. Given the pace of change in the market for communication technologies, we review research published since 2008. Following a thorough bibliographic search of literature from the key disciplines (psychology, sociology, education, media studies and computing sciences), the review concentrates on recent, high quality empirical studies, contextualizing these within an overview of the field. Risks of cyberbullying, contact with strangers, sexual messaging ('sexting') and pornography generally affect fewer than one in five adolescents. Prevalence estimates vary according to definition and measurement, but do not appear to be rising substantially with increasing access to mobile and online technologies, possibly because these technologies pose no additional risk to offline behaviour, or because any risks are offset by a commensurate growth in safety awareness and initiatives. While not all online risks result in self-reported harm, a range of adverse emotional and psychosocial consequences is revealed by longitudinal studies. Useful for identifying which children are more vulnerable than others, evidence reveals several risk factors: personality factors (sensation-seeking, low self-esteem, psychological difficulties), social factors (lack of parental support, peer norms) and digital factors (online practices, digital skills, specific online sites). Mobile and online risks are increasingly intertwined with pre-existing (offline) risks in children's lives. Research gaps, as well as implications for practitioners, are identified. The challenge is now to examine the relations among different risks, and to build on the risk and protective factors identified to design effective interventions. © 2014 The Authors. Journal of Child Psychology and Psychiatry. © 2014 Association for Child and Adolescent Mental Health.

Integrating legal liabilities in nanomanufacturing risk management.

PubMed

Mohan, Mayank; Trump, Benjamin D; Bates, Matthew E; Monica, John C; Linkov, Igor

2012-08-07

Among other things, the wide-scale development and use of nanomaterials is expected to produce costly regulatory and civil liabilities for nanomanufacturers due to lingering uncertainties, unanticipated effects, and potential toxicity. The life-cycle environmental, health, and safety (EHS) risks of nanomaterials are currently being studied, but the corresponding legal risks have not been systematically addressed. With the aid of a systematic approach that holistically evaluates and accounts for uncertainties about the inherent properties of nanomaterials, it is possible to provide an order of magnitude estimate of liability risks from regulatory and litigious sources based on current knowledge. In this work, we present a conceptual framework for integrating estimated legal liabilities with EHS risks across nanomaterial life-cycle stages using empirical knowledge in the field, scientific and legal judgment, probabilistic risk assessment, and multicriteria decision analysis. Such estimates will provide investors and operators with a basis to compare different technologies and practices and will also inform regulatory and legislative bodies in determining standards that balance risks with technical advancement. We illustrate the framework through the hypothetical case of a manufacturer of nanoscale titanium dioxide and use the resulting expected legal costs to evaluate alternative risk-management actions.

Health technology assessment (HTA): a brief introduction of history and the current status in the field of cardiology under the economic crisis.

PubMed

Fanourgiakis, John; Kanoupakis, Emmanuel

2015-08-01

In a time of economic recession health technology assessment is an established aid in decision making in many countries in order to identify cost-containment policy options. Moreover, as the volume, complexity, and cost of new medical technology increases, the need for evaluating benefits, risks and costs becomes increasingly important. In recent years there has been a proliferation of health technology assessment initiatives internationally, aimed in introducing rationality in the decision-making process, informing reimbursement, providing clinical guidance on the use of medical technologies across the world in an evidence-based decision-making environment and in pricing decisions. © 2015 Chinese Cochrane Center, West China Hospital of Sichuan University and Wiley Publishing Asia Pty Ltd.

Youth, Technology and HIV: Recent Advances and Future Directions

PubMed Central

Hightow-Weidman, Lisa B.; Muessig, Kathryn E.; Bauermeister, Jose; Zhang, Chen; LeGrand, Sara

2015-01-01

Technology, including mobile technologies and social media, offers powerful tools to reach, engage, and retain youth and young adults in HIV prevention and care interventions both in the United States and globally. In this report we focus on HIV, technology, and youth, presenting a synthesis of recently published (Jan 2014-May 2015) observational and experimental studies relevant for understanding and intervening on HIV risk, prevention and care. We present findings from a selection of the 66 relevant citations identified, highlighting studies that demonstrate a novel approach to technology interventions among youth in regard to content, delivery, target population or public health impact. We discuss current trends globally and in the US in how youth are using technology, as well as emergent research issues in this field – including the need for new theories for developing technology-based HIV interventions and new metrics of engagement, exposure, and evaluation. PMID:26385582

Risk disparities in the globalisation of assisted reproductive technology: the case of Asia.

PubMed

Ha, Jung-Ok

2013-01-01

This paper analyses the disparities in risks associated with biomedical technology focusing on the results of assisted reproductive technology (ART). ART among biomedical technologies transferred to Asia is a representative case that reveals in its clinical use and related scientific research the global politics of technology. This study notes the global politics at work in the recognition of and reaction to such risks. While many Asian countries aggressively pursue technological development, weak legislative and administrative regulations have created various problems and controversial cases. This study asserts that risks associated with technology are characterised as social facts not natural ones or mere 'side effects', since technological development and risk are closely intertwined.

OR.NET: multi-perspective qualitative evaluation of an integrated operating room based on IEEE 11073 SDC.

PubMed

Rockstroh, M; Franke, S; Hofer, M; Will, A; Kasparick, M; Andersen, B; Neumuth, T

2017-08-01

Clinical working environments have become very complex imposing many different tasks in diagnosis, medical treatment, and care procedures. During the German flagship project OR.NET, more than 50 partners developed technologies for an open integration of medical devices and IT systems in the operating room. The aim of the present work was to evaluate a large set of the proposed concepts from the perspectives of various stakeholders. The demonstration OR is focused on interventions from the head and neck surgery and was developed in close cooperation with surgeons and numerous colleagues of the project partners. The demonstration OR was qualitatively evaluated including technical as well as clinical aspects. In the evaluation, a questionnaire was used to obtain feedback from hospital operators. The clinical implications were covered by structured interviews with surgeons, anesthesiologists and OR staff. In the present work, we qualitatively evaluate a subset of the proposed concepts from the perspectives of various stakeholders. The feedback of the clinicians indicates that there is a need for a flexible data and control integration. The hospital operators stress the need for tools to simplify risk management in openly integrated operating rooms. The implementation of openly integrated operating rooms will positively affect the surgeons, the anesthesiologists, the surgical nursing staff, as well as the technical personnel and the hospital operators. The evaluation demonstrated the need for OR integration technologies and identified the missing tools to support risk management and approval as the main barriers for future installments.

Marine and Hydrokinetic Technology Development Risk Management Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snowberg, David; Weber, Jochem

2015-09-01

Over the past decade, the global marine and hydrokinetic (MHK) industry has suffered a number of serious technological and commercial setbacks. To help reduce the risks of industry failures and advance the development of new technologies, the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) developed an MHK Risk Management Framework. By addressing uncertainties, the MHK Risk Management Framework increases the likelihood of successful development of an MHK technology. It covers projects of any technical readiness level (TRL) or technical performance level (TPL) and all risk types (e.g. technological risk, regulatory risk, commercial risk) over themore » development cycle. This framework is intended for the development and deployment of a single MHK technology—not for multiple device deployments within a plant. This risk framework is intended to meet DOE’s risk management expectations for the MHK technology research and development efforts of the Water Power Program (see Appendix A). It also provides an overview of other relevant risk management tools and documentation.1 This framework emphasizes design and risk reviews as formal gates to ensure risks are managed throughout the technology development cycle. Section 1 presents the recommended technology development cycle, Sections 2 and 3 present tools to assess the TRL and TPL of the project, respectively. Section 4 presents a risk management process with design and risk reviews for actively managing risk within the project, and Section 5 presents a detailed description of a risk registry to collect the risk management information into one living document. Section 6 presents recommendations for collecting and using lessons learned throughout the development process.« less

Treatment of men with high-risk prostate cancer based on race, insurance coverage, and access to advanced technology.

PubMed

Gerhard, Robert Steven; Patil, Dattatraya; Liu, Yuan; Ogan, Kenneth; Alemozaffar, Mehrdad; Jani, Ashesh B; Kucuk, Omer N; Master, Viraj A; Gillespie, Theresa W; Filson, Christopher P

2017-05-01

We characterized factors related to nondefinitive management (NDM) of patients with high-risk prostate cancer and assessed impact from race, insurance status, and facility-level volume of technologically advanced prostate cancer treatments (i.e., intensity-modulated radiation therapy, robotic-assisted laparoscopic radical prostatectomy) on this outcome. We identified men with high-risk localized prostate cancer (based on D׳Amico criteria) in the National Cancer Database (2010-2012). Primary outcome was NDM (i.e., delayed/no treatment with prostatectomy/radiation therapy or androgen-deprivation monotherapy). Treating facilities were classified by quartiles of proportions of patients treated with advanced technology. Multivariable regression estimated odds of primary outcome based on race, insurance status, and facility-level technology use, and evaluated for interactions between these covariates. Among 60,300 patients, 9,265 (15.4%) received NDM. This was more common among non-White men (P<0.001), Medicaid/uninsured patients (P<0.001), and those managed at facilities in the lowest quartile of technology use (25.1% vs. 11.0% highest, P<0.001). Though NDM was common among non-White men with Medicaid/no insurance treated at low-technology centers (43% vs. 10% White, private/Medicare, high-tech facility; adjusted odds ratios = 7.18, P<0.001), this was less likely if this group was managed at a high-tech hospital (22% vs. 43% low-tech, P<0.001). Technology use at a facility correlates with high-quality prostate cancer care and is associated with diminished disparities based on insurance status and patient race. More research is required to characterize other facility-level factors explaining these findings. Published by Elsevier Inc.

Treatment of men with high-risk prostate cancer based on race, insurance coverage, and access to advanced technology

PubMed Central

Gerhard, R. Steven; Patil, Dattatraya; Liu, Yuan; Ogan, Kenneth; Alemozaffar, Mehrdad; Jani, Ashesh B.; Kucuk, Omer N.; Master, Viraj A.; Gillespie, Theresa W.; Filson, Christopher P.

2017-01-01

PURPOSE We characterized factors related to non-definitive management of high-risk prostate cancer patients, and assessed impact from race, insurance status, and facility-level volume of technologically-advanced prostate cancer treatments (i.e. intensity-modulated radiation therapy, robotic-assisted laparoscopic radical prostatectomy) on this outcome. METHODS We identified men with high-risk localized prostate cancer (based on D’Amico criteria) in the National Cancer Data Base (2010–2012). Primary outcome was non-definitive management (i.e., delayed/no treatment with prostatectomy/radiation therapy or androgen deprivation therapy monotherapy). Treating facilities were classified by quartiles of proportions of patients treated with advanced technology. Multivariable regression estimated odds of primary outcome based on race, insurance status, and facility-level technology use, and evaluated for interactions between these covariates. RESULTS Among 60,300 patients, 9265 (15.4%) received non-definitive management. This was more common among non-White men (p<0.001), Medicaid/uninsured patients (p<0.001), and those managed at facilities in the lowest quartile of technology use (25.1% vs 11.0% highest, p<0.001). Though non-definitive management was common among non-White men with Medicaid/no insurance treated at low-technology centers (43% vs 10% White, private/Medicare, high-tech facility; adjusted OR 7.18, p<0.001), this was less likely if this group was managed at a high-tech hospital (22% vs 43% low-tech, p<0.001). CONCLUSIONS Technology-use at a facility correlates with high-quality prostate cancer care, and is associated with diminished disparities based on insurance status and patient race. More research is required to characterize other facility-level factors explaining these findings. PMID:28089387

Nanosilver conductive ink: A case study for evaluating the potential risk of nanotechnology under hypothetical use scenarios.

PubMed

Martin, David P; Melby, Nicolas L; Jordan, Shinita M; Bednar, Anthony J; Kennedy, Alan J; Negrete, Maria E; Chappell, Mark A; Poda, Aimee R

2016-11-01

Engineered nanomaterials (ENMs) are being incorporated into a variety of consumer products due to unique properties that offer a variety of advantages over bulk materials. Understanding of the nano-specific risk associated with nano-enabled technologies, however, continues to lag behind research and development, registration with regulators, and commercialization. One example of a nano-enabled technology is nanosilver ink, which can be used in commercial ink-jet printers for the development of low-cost printable electronics. This investigation utilizes a tiered EHS framework to evaluate the potential nano-specific release, exposure and hazard associated with typical use of both nanosilver ink and printed circuits. The framework guides determination of the potential for ENM release from both forms of the technology in simulated use scenarios, including spilling of the ink, aqueous release (washing) from the circuits and UV light exposure. The as-supplied ink merits nano-specific consideration based on the presence of nanoparticles and their persistence in environmentally-relevant media. The material released from the printed circuits upon aqueous exposure was characterized by a number of analysis techniques, including ultracentrifugation and single particle ICP-MS, and the results suggest that a vast majority of the material was ionic in nature and nano-specific regulatory scrutiny may be less relevant. Published by Elsevier Ltd.

Latest research results on the effects of nanomaterials on humans and the environment: DaNa - Knowledge Base Nanomaterials

NASA Astrophysics Data System (ADS)

Marquardt, C.; Kühnel, D.; Richter, V.; Krug, H. F.; Mathes, B.; Steinbach, C.; Nau, K.

2013-04-01

Nanotechnology is considered one of the key technologies of the 21st century. The success of this fascinating technology is based on its versatility. It will bring about fundamental changes of basic research as well as of many sectors of industry and also of daily life from electronics to the health care system. However, consumers often miss reliable and understandable information on nanomaterials and all aspects of this versatile technology. A huge body of data on the potential hazards of nanoobjects towards human and environmental health already exists, but is either not easily accessible for a broad audience or presented unprocessable for nonexperts. But risk communication is an essential and thus integral component of risk management. For that purpose, the DaNa-Project aims at filling this gap by collecting and evaluating scientific results in an interdisciplinary approach with scientists from different research areas, such as human and environmental toxicology, biology, physics, chemistry, and sociology. Research findings from the field of human and environmental nanotoxicology are being prepared and presented together with material properties and possible applications for interested laymen and stakeholders. For the evaluation of literature a "Literature Criteria Checklist" has been developed as well as a Standard Operation Procedure template (SOP) based on careful scientific practice.

[Meta-analyses on measurement precision of non-invasive hemodynamic monitoring technologies in adults].

PubMed

Pestel, G; Fukui, K; Higashi, M; Schmidtmann, I; Werner, C

2018-06-01

An ideal non-invasive monitoring system should provide accurate and reproducible measurements of clinically relevant variables that enables clinicians to guide therapy accordingly. The monitor should be rapid, easy to use, readily available at the bedside, operator-independent, cost-effective and should have a minimal risk and side effect profile for patients. An example is the introduction of pulse oximetry, which has become established for non-invasive monitoring of oxygenation worldwide. A corresponding non-invasive monitoring of hemodynamics and perfusion could optimize the anesthesiological treatment to the needs in individual cases. In recent years several non-invasive technologies to monitor hemodynamics in the perioperative setting have been introduced: suprasternal Doppler ultrasound, modified windkessel function, pulse wave transit time, radial artery tonometry, thoracic bioimpedance, endotracheal bioimpedance, bioreactance, and partial CO 2 rebreathing have been tested for monitoring cardiac output or stroke volume. The photoelectric finger blood volume clamp technique and respiratory variation of the plethysmography curve have been assessed for monitoring fluid responsiveness. In this manuscript meta-analyses of non-invasive monitoring technologies were performed when non-invasive monitoring technology and reference technology were comparable. The primary evaluation criterion for all studies screened was a Bland-Altman analysis. Experimental and pediatric studies were excluded, as were all studies without a non-invasive monitoring technique or studies without evaluation of cardiac output/stroke volume or fluid responsiveness. Most studies found an acceptable bias with wide limits of agreement. Thus, most non-invasive hemodynamic monitoring technologies cannot be considered to be equivalent to the respective reference method. Studies testing the impact of non-invasive hemodynamic monitoring technologies as a trend evaluation on outcome, as well as studies evaluating alternatives to the finger for capturing the raw signals for hemodynamic assessment, and, finally, studies evaluating technologies based on a flow time measurement are current topics of clinical research.

Active Matrix OLED Test Report

NASA Technical Reports Server (NTRS)

Salazar, George

2013-01-01

This report focuses on the limited environmental testing of the AMOLED display performed as an engineering evaluation by The NASA Johnson Space Center (JSC)-specifically. EMI. Thermal Vac, and radiation tests. The AMOLED display is an active-matrix Organic Light Emitting Diode (OLED) technology. The testing provided an initial understanding of the technology and its suitability for space applications. Relative to light emitting diode (LED) displays or liquid crystal displays (LCDs), AMOLED displays provide a superior viewing experience even though they are much lighter and smaller, produce higher contrast ratio and richer colors, and require less power to operate than LCDs. However, AMOLED technology has not been demonstrated in a space environment. Therefore, some risks with the technology must be addressed before they can be seriously considered for human spaceflight. The environmental tests provided preliminary performance data on the ability of the display technology to handle some of the simulated induced space/spacecraft environments that an AMOLED display will see during a spacecraft certification test program. This engineering evaluation is part of a Space Act Agreement (SM) between The NASA/JSC and Honeywell International (HI) as a collaborative effort to evaluate the potential use of AMOLED technology for future human spaceflight missions- both government-led and commercial. Under this SM, HI is responsible for doing optical performance evaluation, as well as temperature and touch screen studies. The NASA/JSC is responsible for performing environmental testing comprised of EMI, Thermal Vac, and radiation tests. Additionally, as part of the testing, limited optical data was acquired to assess performance as the display was subjected to the induced environments. The NASA will benefit from this engineering evaluation by understanding AMOLED suitability for future use in space as well as becoming a smarter buyer (or developer) of the technology. HI benefits from the environmental testing results by understanding its performance limitations/shortcomings to improve subsequent generations of AMOLED technology. Note that the AMOLED used in this test was not deSigned for the space environment but rather for commercial/industrial terrestrial applications.

Evaluation of Gas Chromatography/Mini-IMS to Detect VOCs

NASA Technical Reports Server (NTRS)

Limero, Thomas; Reese, Eric; Peters, Randy; James, John T.; Billica, Roger (Technical Monitor)

1999-01-01

The Toxicology Laboratory at Johnson Space Center (JSC) has pioneered the use of gas chromatography-ion mobility spectrometry (GC/IMS) for measuring target volatile organic compounds (VOCs) aboard spacecraft. Graseby Dynamics, under contract to NASA/Wyle, has built several volatile organic analyzers (VOA) based on GC/IMS. Foremost among these have been the volatile organic analyzer-risk mitigation unit and the two flight VOA units for International Space Station (ISS). The development and evaluation of these instruments has been chronicled through presentations at the International Conference on Ion Mobility Spectrometry over the past three years. As the flight VOA from Graseby is prepared for operation on ISS at JSC, it is time to begin evaluations of technologies for the next generation VOA, Although the desired instrument characteristics for the next generation unit are the same as the current unit, the requirements are much more stringent. As NASA looks toward future missions beyond Earth environs, a premium will be placed upon small, light, reliable, autonomous hardware. It is with these visions in mind that the JSC Toxicology Laboratory began a search for the next generation VOA. One technology that is a candidate for the next generation VOA is GC/IMS. The recent miniaturization of IMS technology permits it to compete with other, inherently small, technologies such as chip-sized sensor arrays. This paper will discuss the lessons learned from the VOA experience and how that has shaped the design of a potential second generation VOA based upon GC/IMS technology. Data will be presented from preliminary evaluations of GC technology and the mini-IMS when exposed to VOCs likely to be detected aboard spacecraft. Results from the evaluation of an integrated GC/mini-IMS system will be shown if available.

In-Space Structural Assembly: Applications and Technology

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Doggett, Bill R.; Watson, Judith J.; Dorsey, John T.; Warren, Jay; Jones, Thomas C.; Komendera, Erik E.; Mann, Troy O.; Bowman, Lynn

2016-01-01

As NASA exploration moves beyond earth's orbit, the need exists for long duration space systems that are resilient to events that compromise safety and performance. Fortunately, technology advances in autonomy, robotic manipulators, and modular plug-and-play architectures over the past two decades have made in-space vehicle assembly and servicing possible at acceptable cost and risk. This study evaluates future space systems needed to support scientific observatories and human/robotic Mars exploration to assess key structural design considerations. The impact of in-space assembly is discussed to identify gaps in structural technology and opportunities for new vehicle designs to support NASA's future long duration missions.

Environmentally Sound Processing Technology: JANNAF Safety and Environmental Protection Subcommittee and Propellant Development and Characterization Subcommittee Joint Workshop

NASA Technical Reports Server (NTRS)

Pickett, Lorri A. (Editor)

1995-01-01

Topics covered include: Risk assessment of hazardous materials, Automated systems for pollution prevention and hazardous materials elimination, Study design for the toxicity evaluation of ammonium perchlorate, Plasma sprayed bondable stainless surface coatings, Development of CFC-free cleaning processes, New fluorinated solvent alternatives to ozone depleting solvents, Cleaning with highly fluorinated liquids, Biotreatment of propyleneglycol nitrate by anoxic denitrification, Treatment of hazardous waste with white rot fungus, Hydrothermal oxidation as an environmentally benign treatment technology, Treatment of solid propellant manufacturing wastes by base hydrolysis, Design considerations for cleaning using supercritical fluid technology, and Centrifugal shear carbon dioxide cleaning.

Sunscreens with Titanium Dioxide (TiO2) Nano-Particles: A Societal Experiment

PubMed Central

van de Poel, Ibo; Osseweijer, Patricia

2010-01-01

The risks of novel technologies, such as nano(bio)technology cannot be fully assessed due to the existing uncertainties surrounding their introduction into society. Consequently, the introduction of innovative technologies can be conceptualised as a societal experiment, which is a helpful approach to evaluate moral acceptability. This approach is illustrated with the marketing of sunscreens containing nano-sized titanium dioxide (TiO2) particles. We argue that the marketing of this TiO2 nanomaterial in UV protective cosmetics is ethically undesirable, since it violates four reasonable moral conditions for societal experimentation (absence of alternatives, controllability, limited informed consent, and continuing evaluation). To remedy the current way nano-sized TiO2 containing sunscreens are utilised, we suggest five complementing actions (closing the gap, setup monitoring tools, continuing review, designing for safety, and regulative improvements) so that its marketing can become more acceptable. PMID:20835397

Safe use of vaccines and vaccine compliance with food safety requirements.

PubMed

Grein, K; Papadopoulos, O; Tollis, M

2007-08-01

Advanced technologies and regulatory regimes have contributed to the availability of veterinary vaccines that have high quality and favourable safety profiles in terms of potential risks posed to the target animals, the persons who come into contact with the vaccine, the consumers of food derived from vaccinated animals and the environment. The authorisation process requires that a range of safety studies are provided to evaluate the products. The design and production of vaccines, and their safe use, are primarily assessed by using data gathered from extensive pre-marketing studies performed on target animals and specific quality tests. The current post-marketing safeguards include good manufacturing practices, batch safety testing, inspections and pharmacovigilance. In addition to hazard identification, a full benefit/risk evaluation needs to be undertaken. The outcome of that evaluation will determine options for risk management and affect regulatory decisions on the safety of the vaccine; options might, for example, include special warnings on package inserts and labels.

Risk management in technovigilance: construction and validation of a medical-hospital product evaluation instrument.

PubMed

Kuwabara, Cleuza Catsue Takeda; Evora, Yolanda Dora Martinez; de Oliveira, Márcio Mattos Borges

2010-01-01

With the continuous incorporation of health technologies, hospital risk management should be implemented to systemize the monitoring of adverse effects, performing actions to control and eliminate their damage. As part of these actions, Technovigilance is active in the procedures of acquisition, use and quality control of health products and equipment. This study aimed to construct and validate an instrument to evaluate medical-hospital products. This is a quantitative, exploratory, longitudinal and methodological development study, based on the Six Sigma quality management model, which has as its principle basis the component stages of the DMAIC Cycle. For data collection and content validation, the Delphi technique was used with professionals from the Brazilian Sentinel Hospital Network. It was concluded that the instrument developed permitted the evaluation of the product, differentiating between the results of the tested brands, in line with the initial study goal of qualifying the evaluations performed.

Regulatory uncertainty and the associated business risk for emerging technologies

NASA Astrophysics Data System (ADS)

Hoerr, Robert A.

2011-04-01

An oversight system specifically concerned with nanomaterials should be flexible enough to take into account the unique aspects of individual novel materials and the settings in which they might be used, while recognizing that heretofore unrecognized safety issues may require future modifications. This article considers a question not explicitly considered by the project team: what is the risk that uncertainty over how regulatory oversight will be applied to nanomaterials will delay or block the development of this emerging technology, thereby depriving human health of potential and substantial benefits? An ambiguous regulatory environment could delay the availability of valuable new technology and therapeutics for human health by reducing access to investment capital. Venture capitalists list regulatory uncertainty as a major reason not to invest at all in certain areas. Uncertainty is far more difficult to evaluate than risk, which lends itself to quantitative models and can be factored into projections of return on possible investments. Loss of time has a large impact on investment return. An examination of regulatory case histories suggests that an increase in regulatory resting requirement, where the path is well-defined, is far less costly than a delay of a year or more in achieving product approval and market launch.

Vulnerability assessment and risk perception: the case of the Arieş River Middle Basin

NASA Astrophysics Data System (ADS)

Ozunu, Al.; Botezan, C.

2012-04-01

Vulnerability assessment is influenced by a number of factors, including risk perception. This paper investigates the vulnerability of people living in the middle basin of the Aries river region, a former mining area, to natural and technologic hazards. The mining industry lead to significant environmental changes, which combined with the social problems caused by its decline (high unemployment rate, low income and old age) raised the level of the vulnerability in the area. This case study is unique, as it includes an evaluation of risk perception and its influence on the social vulnerability and resilience of local communities to disasters. Key words: vulnerability assessment, natural hazards, social vulnerability, risk perception

A Risk Assessment Model for Reduced Aircraft Separation: A Quantitative Method to Evaluate the Safety of Free Flight

NASA Technical Reports Server (NTRS)

Cassell, Rick; Smith, Alex; Connors, Mary; Wojciech, Jack; Rosekind, Mark R. (Technical Monitor)

1996-01-01

As new technologies and procedures are introduced into the National Airspace System, whether they are intended to improve efficiency, capacity, or safety level, the quantification of potential changes in safety levels is of vital concern. Applications of technology can improve safety levels and allow the reduction of separation standards. An excellent example is the Precision Runway Monitor (PRM). By taking advantage of the surveillance and display advances of PRM, airports can run instrument parallel approaches to runways separated by 3400 feet with the same level of safety as parallel approaches to runways separated by 4300 feet using the standard technology. Despite a wealth of information from flight operations and testing programs, there is no readily quantifiable relationship between numerical safety levels and the separation standards that apply to aircraft on final approach. This paper presents a modeling approach to quantify the risk associated with reducing separation on final approach. Reducing aircraft separation, both laterally and longitudinally, has been the goal of several aviation R&D programs over the past several years. Many of these programs have focused on technological solutions to improve navigation accuracy, surveillance accuracy, aircraft situational awareness, controller situational awareness, and other technical and operational factors that are vital to maintaining flight safety. The risk assessment model relates different types of potential aircraft accidents and incidents and their contribution to overall accident risk. The framework links accident risks to a hierarchy of failsafe mechanisms characterized by procedures and interventions. The model will be used to assess the overall level of safety associated with reducing separation standards and the introduction of new technology and procedures, as envisaged under the Free Flight concept. The model framework can be applied to various aircraft scenarios, including parallel and in-trail approaches. This research was performed under contract to NASA and in cooperation with the FAA's Safety Division (ASY).

Electric Propulsion Requirements and Mission Analysis Under NASA's In-Space Propulsion Technology Project

NASA Technical Reports Server (NTRS)

Dudzinski, Leonard a.; Pencil, Eric J.; Dankanich, John W.

2007-01-01

The In-Space Propulsion Technology Project (ISPT) is currently NASA's sole investment in electric propulsion technologies. This project is managed at NASA Glenn Research Center (GRC) for the NASA Headquarters Science Mission Directorate (SMD). The objective of the electric propulsion project area is to develop near-term and midterm electric propulsion technologies to enhance or enable future NASA science missions while minimizing risk and cost to the end user. Systems analysis activities sponsored by ISPT seek to identify future mission applications in order to quantify mission requirements, as well as develop analytical capability in order to facilitate greater understanding and application of electric propulsion and other propulsion technologies in the ISPT portfolio. These analyses guide technology investments by informing decisions and defining metrics for technology development to meet identified mission requirements. This paper discusses the missions currently being studied for electric propulsion by the ISPT project, and presents the results of recent electric propulsion (EP) mission trades. Recent ISPT systems analysis activities include: an initiative to standardize life qualification methods for various electric propulsion systems in order to retire perceived risk to proposed EP missions; mission analysis to identify EP requirements from Discovery, New Frontiers, and Flagship classes of missions; and an evaluation of system requirements for radioisotope-powered electric propulsion. Progress and early results of these activities is discussed where available.

Diesel Engine Exhaust: Basis for Occupational Exposure Limit Value.

PubMed

Taxell, Piia; Santonen, Tiina

2017-08-01

Diesel engines are widely used in transport and power supply, making occupational exposure to diesel exhaust common. Both human and animal studies associate exposure to diesel exhaust with inflammatory lung effects, cardiovascular effects, and an increased risk of lung cancer. The International Agency for Research on Cancer has evaluated diesel exhaust as carcinogenic to humans. Yet national or regional limit values for controlling occupational exposure to diesel exhaust are rare. In recent decades, stricter emission regulations have led to diesel technologies evolving significantly, resulting in changes in exhaust emissions and composition. These changes are also expected to influence the health effects of diesel exhaust. This review provides an overview of the current knowledge on the health effects of diesel exhaust and the influence of new diesel technologies on the health risk. It discusses the relevant exposure indicators and perspectives for setting occupational exposure limit values for diesel exhaust, and outlines directions for future research. The review is based on a collaborative evaluation report by the Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals and the Dutch Expert Committee on Occupational Safety. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Affect and Acceptability: Exploring Teachers' Technology-Related Risk Perceptions

ERIC Educational Resources Information Center

Howard, Sarah K.

2011-01-01

Educational change, such as technology integration, involves risk. Teachers are encouraged to "take risks", but what risks they are asked to take and how do they perceive these risks? Developing an understanding of teachers' technology-related risk perceptions can help explain their choices and behaviours. This paper presents a way to…

Space: The Final Frontier of Bone Density

NASA Technical Reports Server (NTRS)

Sibonga, Jean D.

2011-01-01

It is a medical requirement at NASA to evaluate the skeletal integrity of "long-duration" astronauts by measuring bone mineral density [BMD] with DXA technology. A long-duration mission is a spaceflight that is greater than 30 days but is typically the continuous 120-180 day missions aboard the International Space Station [ISS]. Not only does NASA use the BMD index to monitor fracture risk in this astronaut population, but these measures are also used to describe the effects of spaceflight, to certify skeletal health readiness for flight, to monitor the recovery of lost bone mass after return to earth, and to evaluate the efficacy of countermeasures to bone loss. However, despite the fact that DXA-based BMD is a widely-applied surrogate for bone strength that is grounded in an abundance of population-based fracture data, its applicability to the long-duration astronaut is limited. The cohort of long-duration astronauts is not the typical group for evaluating osteoporosis or determining age-related fracture risk. The cohort is young (< 55 years), predominantly male and exposed to novel risk factors for bone loss besides the weightlessness of space. NASA is concerned about early onset osteoporosis in the astronaut exposed to long-duration spaceflight, especially since any detectable symptoms are likely to manifest after return to earth and perhaps years after space travel. This risk raises the question: is NASA doing enough now to mitigate a fracture event that may manifest later? This presentation will discuss the limitations and constraints to understanding skeletal changes due to prolonged spaceflight and the recommendations, by clinical experts in osteoporosis and BMD, to transition research technologies for clinical decision-making by NASA.

Computer-Assisted Diabetes Risk Assessment and Education (CADRAE) for Medically Vulnerable Populations in the Middle East: a Novel and Practical Method for Prevention

PubMed Central

Rowther, Armaan A.; Dykzeul, Brad; Billimek, John; Abuhassan, Deyana; Anderson, Craig; Lotfipour, Shahram

2016-01-01

The prevalence of diabetes in the Middle East is increasing rapidly due to urbanization, reduced levels of physical activity, and a nutritional transition toward increased consumption of fats and refined carbohydrates. Preventive strategies are of paramount importance to stemming the tide. Portable touch-screen computer technology may hold an answer for alleviating the burdens of cost, time, and training that limit the implementation of diabetes risk screening and intervention, especially among refugees and other vulnerable populations. The Computer-Assisted Diabetes Risk Assessment and Education (CADRAE) Arabic-language intervention program is proposed as a model method for practicing proactive type 2 diabetes prevention in resource-limited settings of the Middle East that combines the efficiency of risk-score screening methods, the advantages of portable computer interface, and the spirit of brief motivational interviewing. This paper aims to describe the theory and novel design of CADRAE—introduced at the Noor Al Hussein Foundation's Institute of Family Health in January 2014—as well as discuss opportunities and challenges for its implementation and evaluation in primary or emergency care settings. Features of CADRAE are elucidated in detail, including development, translation, conceptual framework, theoretical basis, method of risk assessment, brief intervention style, definition of outcomes, requirements for implementation, and potential means of evaluation and quality improvement. CADRAE offers the first example of portable computer technology integrating diabetes risk screening with behavior change counseling tailored for an Arabic-speaking population of mostly refugees and could offer a valuable model for researchers and policy makers of the Middle East as well as other resource-limited settings. PMID:26835181

Evaluating the Cost, Safety, and Proliferation Risks of Small Floating Nuclear Reactors.

PubMed

Ford, Michael J; Abdulla, Ahmed; Morgan, M Granger

2017-11-01

It is hard to see how our energy system can be decarbonized if the world abandons nuclear power, but equally hard to introduce the technology in nonnuclear energy states. This is especially true in countries with limited technical, institutional, and regulatory capabilities, where safety and proliferation concerns are acute. Given the need to achieve serious emissions mitigation by mid-century, and the multidecadal effort required to develop robust nuclear governance institutions, we must look to other models that might facilitate nuclear plant deployment while mitigating the technology's risks. One such deployment paradigm is the build-own-operate-return model. Because returning small land-based reactors containing spent fuel is infeasible, we evaluate the cost, safety, and proliferation risks of a system in which small modular reactors are manufactured in a factory, and then deployed to a customer nation on a floating platform. This floating small modular reactor would be owned and operated by a single entity and returned unopened to the developed state for refueling. We developed a decision model that allows for a comparison of floating and land-based alternatives considering key International Atomic Energy Agency plant-siting criteria. Abandoning onsite refueling is beneficial, and floating reactors built in a central facility can potentially reduce the risk of cost overruns and the consequences of accidents. However, if the floating platform must be built to military-grade specifications, then the cost would be much higher than a land-based system. The analysis tool presented is flexible, and can assist planners in determining the scope of risks and uncertainty associated with different deployment options. © 2017 Society for Risk Analysis.

NASA Langley Systems Analysis & Concepts Directorate Technology Assessment/Portfolio Analysis

NASA Technical Reports Server (NTRS)

Cavanaugh, Stephen; Chytka, Trina; Arcara, Phil; Jones, Sharon; Stanley, Doug; Wilhite, Alan W.

2006-01-01

Systems analysis develops and documents candidate mission and architectures, associated system concepts, enabling capabilities and investment strategies to achieve NASA s strategic objectives. The technology assessment process connects the mission and architectures to the investment strategies. In order to successfully implement a technology assessment, there is a need to collect, manipulate, analyze, document, and disseminate technology-related information. Information must be collected and organized on the wide variety of potentially applicable technologies, including: previous research results, key technical parameters and characteristics, technology readiness levels, relationships to other technologies, costs, and potential barriers and risks. This information must be manipulated to facilitate planning and documentation. An assessment is included of the programmatic and technical risks associated with each technology task as well as potential risk mitigation plans. Risks are assessed and tracked in terms of likelihood of the risk occurring and consequences of the risk if it does occur. The risk assessments take into account cost, schedule, and technical risk dimensions. Assessment data must be simplified for presentation to decision makers. The Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center has a wealth of experience in performing Technology Assessment and Portfolio Analysis as this has been a business line since 1978.

China's soil and groundwater management challenges: Lessons from the UK's experience and opportunities for China.

PubMed

Coulon, Frédéric; Jones, Kevin; Li, Hong; Hu, Qing; Gao, Jingyang; Li, Fasheng; Chen, Mengfang; Zhu, Yong-Guan; Liu, Rongxia; Liu, Ming; Canning, Kate; Harries, Nicola; Bardos, Paul; Nathanail, Paul; Sweeney, Rob; Middleton, David; Charnley, Maggie; Randall, Jeremy; Richell, Martin; Howard, Trevor; Martin, Ian; Spooner, Simon; Weeks, Jason; Cave, Mark; Yu, Fang; Zhang, Fang; Jiang, Ying; Longhurst, Phil; Prpich, George; Bewley, Richard; Abra, Jonathan; Pollard, Simon

2016-05-01

There are a number of specific opportunities for UK and China to work together on contaminated land management issues as China lacks comprehensive and systematic planning for sustainable risk based land management, encompassing both contaminated soil and groundwater and recycling and reuse of soil. It also lacks comprehensive risk assessment systems, structures to support risk management decision making, processes for verification of remediation outcome, systems for record keeping and preservation and integration of contamination issues into land use planning, along with procedures for ensuring effective health and safety considerations during remediation projects, and effective evaluation of costs versus benefits and overall sustainability. A consequence of the absence of these overarching frameworks has been that remediation takes place on an ad hoc basis. At a specific site management level, China lacks capabilities in site investigation and consequent risk assessment systems, in particular related to conceptual modelling and risk evaluation. There is also a lack of shared experience of practical deployment of remediation technologies in China, analogous to the situation before the establishment of the independent, non-profit organisation CL:AIRE (Contaminated Land: Applications In Real Environments) in 1999 in the UK. Many local technology developments are at lab-scale or pilot-scale stage without being widely put into use. Therefore, a shared endeavour is needed to promote the development of technically and scientifically sound land management as well as soil and human health protection to improve the sustainability of the rapid urbanisation in China. Copyright © 2016 Elsevier Ltd. All rights reserved.

Towards a Framework for Managing Risk Associated with Technology-Induced Error.

PubMed

Borycki, Elizabeth M; Kushniruk, Andre W

2017-01-01

Health information technologies (HIT) promised to streamline and modernize healthcare processes. However, a growing body of research has indicated that if such technologies are not designed, implemented or maintained properly this may lead to an increased incidence of new types of errors which the authors have referred to as "technology-induced errors". In this paper, framework is presented that can be used to manage HIT risk. The framework considers the reduction of technology-induced errors at different stages by managing risks associated with the implementation of HIT. Frameworks that allow health information technology managers to employ proactive and preventative approaches that can be used to manage the risks associated with technology-induced errors are critical to improving HIT safety and managing risk associated with implementing new technologies.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis.

PubMed

Vest, Joshua R; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B

2015-12-01

Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004-2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = -0.17; 95% confidence interval [CI] = [-0.25, -0.09]; P < .001). However, image sharing technology was associated with a significant increase in any imaging utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis

PubMed Central

Vest, Joshua R.; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B.

2016-01-01

Introduction Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Methods Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004–2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. Results A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = −0.17; 95% confidence interval [CI] = [−0.25, −0.09]; P < .001). However, image sharing technology was associated with a significant increase in any imaging utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Conclusions Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. PMID:26614882

Performance Evaluation of UHF RFID Technologies for Real-Time Bus Recognition in the Taipei Bus Station

PubMed Central

Own, Chung-Ming; Lee, Da-Sheng; Wang, Ti-Ho; Wang, De-Jun; Ting, Yu-Lun

2013-01-01

Transport stations such as airports, ports, and railways have adopted blocked-type pathway management to process and control travel systems in a one-directional manner. However, this excludes highway transportation where large buses have great variability and mobility; thus, an instant influx of numerous buses increases risks and complicates station management. Focusing on Taipei Bus Station, this study employed RFID technology to develop a system platform integrated with modern information technology that has numerous characteristics. This modern information technology comprised the following systems: ultra-high frequency (UHF) radio-frequency identification (RFID), ultrasound and license number identification, and backstage graphic controls. In conclusion, the system enabled management, bus companies, and passengers to experience the national bus station's new generation technology, which provides diverse information and synchronization functions. Furthermore, this technology reached a new milestone in the energy-saving and efficiency-increasing performance of Taiwan's buses. PMID:23778192

Evaluation of Carrying Capacity Land-Based Layout to Mitigate Flood Risk (Case Study in Tempuran Floodplain, Ponorogo Regency) Novia Lusiana1 Bambang Rahadi2 Tunggul Sutanhaji3 1Environmental and Natural Resources Management Graduate Program University of Brawijaya, Malang, Indonesia 23Laboratory of Environment and Natural Resources Engineering, Department of Agricultural Engineering, Faculty of Agricultural Technology, University of Brawijaya, Malang, Indonesia Email : novialusiana@rocketmail.com, jbrahadi@ub.ac.id, tunggulsutanhaji@yahoo.com

NASA Astrophysics Data System (ADS)

Lusiana, N.

2013-12-01

Abstract Floods haves frequently hit Indonesia and have had greater negative impacts. In Javaboth the area affected by flooding and the amount of damage caused by floods have increased. At least, five factors, affect the flooding in Indonesia, including rainfall, reduced retention capacity of the watershed, erroneous design of river channel development, silting-up of the river, and erroneous regional layout. The level of the disastrous risks can be evaluated based on the extent of the threat and susceptibility of a region. One methode for risk assessment is Geographical Information System (GIS)-based mapping. Objectives of this research are: 1) evaluating current flood risk in susceptible areas, 2) applying supported land-based layout as effort to mitigate floodrisk, and 3) evaluating floodrisk for the period 2031 in the Tempuran floodplain of Ponorogo Regency. Result show that the area categorized as high risk covers 104. 6 ha (1. 2%), moderate risk covers 2512. 9 ha (28. 4%), low risk covers 3140. 8 ha (35. 5%), and the lowest risk covers 3096. 1 (34. 9%). Using Regional Layout Design for the years 2011 - 2031, the high risk area covers 67. 9 ha (0.8%), moderate risk covers 3033 ha (34. 3%), low risk covers 2770. 8 ha (31, 3%), and the lowest risk covers 2982. 6 ha (34%). Based on supported land suitability, the high-risk areais only 2. 9 ha (0.1%), moderate risk covers of 426. 1 ha (4. 8%), low risk covers 4207. 4 ha (47. 5%), and the lowest risk covers 4218 ha (47. 6%). Flood risk can be mitigated by applying supported land-based layout as shown by the reduced high-risk area, and the fact that > 90% of the areas are categorized as low or lowest risk of disaster. Keywords : Carrying Capacity, Land Capacity, Flood Risk

Systems study for an Integrated Digital-Electric Aircraft (IDEA)

NASA Technical Reports Server (NTRS)

Tagge, G. E.; Irish, L. A.; Bailey, A. R.

1985-01-01

The results of the Integrated Digital/Electric Aircraft (IDEA) Study are presented. Airplanes with advanced systems were, defined and evaluated, as a means of identifying potential high payoff research tasks. A baseline airplane was defined for comparison, typical of a 1990's airplane with advanced active controls, propulsion, aerodynamics, and structures technology. Trade studies led to definition of an IDEA airplane, with extensive digital systems and electric secondary power distribution. This airplane showed an improvement of 3% in fuel use and 1.8% in DOC relative to the baseline configuration. An alternate configuration, an advanced technology turboprop, was also evaluated, with greater improvement supported by digital electric systems. Recommended research programs were defined for high risk, high payoff areas appropriate for implementation under NASA leadership.

Risk Perception and the Psychology of Natural Hazard Preparedness

NASA Astrophysics Data System (ADS)

Thompson, K. J.; Weber, E. U.

2014-12-01

In the preparedness phase of the disaster cycle, willingness to invest resources in prevention and mitigation doesn't depend only on quantitative judgments of the probability of a disaster. People also evaluate the risks of situations in qualitative ways. Psychological studies of risk perception have shown that risk attitudes toward everyday technologies and activities (e.g., electric power, air travel, smoking) can be mapped onto two orthogonal dimensions: how unknown the risks seem, and how dread or severe they feel. Previously, this psychometric approach to risk perception has focused mostly on man-made risks (e.g., Fischhoff et al. 1978, Slovic 1987). In this paper we examine how natural hazards fit into the established unknown/dread risk space. Hazards that are high on the unknown dimension of risk tend to be perceived as having effects that are unknown to science and to the exposed, uncontrollable, and new. Hazards that rank high on the dread/severity dimension are seen as immediate, catastrophic, highly dreaded on a gut level, new, and likely to be fatal. Perceived risk tends to be highest for hazards that are both high on the dread dimension and low on the unknown dimension. We find that weather-related hazards rank lowest on both dimensions: blizzards, heat waves, hailstorms, fog, and ice storms are all feel very known and not particularly dread. The exception for this group is hurricanes and tornadoes, which are viewed as more similar to geophysical hazards and mass movements: high on dread, though not particularly unknown. Two notable outliers are climate change and sea-level rise, which are both considered very unknown (higher than any other natural hazard save sinkholes), and not at all dread (less dread even than fog and dust storms). But when compared with perceptions of technological hazards, nearly every natural hazard ranks as more dread than any technology or activity, including nuclear power. Man-made hazards fall with technologies, rather than with natural hazards—climate change and sea-level rise are both only as dread as electric power and motor vehicles, yet feel as unknown as terrorism and GMO foods. We discuss the implications of these qualitative elements of hazard risk perception for the preparedness phase of the disaster lifecycle, and offer recommendations to practitioners and educators.

EVALUATION OF SOIL WASHING TECHNOLOGY: RESULTS OF BENCH SCALE EXPERIMENTS ON PETROLEUM FUELS CONTAMINATED SOILS - EPA/600/S2-91/023

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) through its Risk Reduction Engineering Laboratory's Release Control Branch has undertaken research and development efforts to address the problem of leaking underground storage tanks (USTs). Under this effort, EPA is currently eva...

Environmental Technology Verification Report for Abraxis 17β-Estradiol (E2) Magnetic Particle Enzyme-Linked Immunosorbent Assay (ELISA) Test Kits

EPA Science Inventory

The EPA's National Risk Management Research Laboratory (NRMRL) and its verification organization partner, Battelle, operate the Advanced Monitoring Systems (AMS) Center under ETV. The AMS Center recently evaluated the performance of the Abraxis 17(beta)-estradiol (E2) magnetic p...

Agroforestry adoption in the Calakmul biosphere reserve, Campeche, Mexico

Treesearch

D. Evan Mercer; Jeremy Haggar; Ann Snook; Mauricio Sosa

2005-01-01

Since farmers engage in a complex, dynamic process of learning-by-doing, evaluating economic incentives, and assessing risks in deciding whether to adopt agroforestry systems, a multi-pronged research approach is required for a complete analysis of adoption potential and to develop effective technological and institutional interventions. A case study is presented for...

EVALUATION OF DRINKING WATER TREATMENT TECHNOLOGIES FOR REMOVAL OF ENDOCRINE DISRUPTING CHEMICALS (EDCS)

EPA Science Inventory

A number of the chemicals identified as potential EDCs have been observed in surface and ground waters leading to concern over the possible presence of EDCs in finished drinking waters. Although there has not yet been a determination of risks posed by EDCs in finished waters, it ...

The effectiveness of information and communication technology-based psychological interventions for paediatric chronic pain: protocol for a systematic review, meta-analysis and intervention content analysis.

PubMed

Traynor, Angeline; Morrissey, Eimear; Egan, Jonathan; McGuire, Brian E

2016-10-18

Resource and geographic barriers are the commonly cited constraints preventing the uptake of psychological treatment for chronic pain management. For adults, there is some evidence to support the use of information and communication technology (ICT) as a mode of treatment delivery. However, mixed findings have been reported for the effectiveness and acceptability of psychological interventions delivered using information and communication technology for children and adolescents. This is a protocol for a review that aims to (i) evaluate the effectiveness of psychological interventions delivered using information and communication technology for children and adolescents with chronic pain and (ii) identify the intervention components and usability factors in technology-based treatments associated with behaviour change. We will conduct a systematic review to evaluate the effectiveness of psychological interventions for paediatric chronic pain delivered using ICT. We plan to directly compare ICT-based, psychological interventions with active control, treatment as usual or waiting list control conditions. This systematic review will be reported in line with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidance. Published and unpublished randomised controlled trials will be included and the literature search will comprise Ovid MEDLINE, Ovid Embase, PsycINFO and the Cochrane Library on Wiley, including CENTRAL and Cochrane Database of Systematic Reviews. Grey literature including theses, dissertations, technical and research reports will also be examined. Two review authors will independently conduct study selection, relevant data extraction and assessment of methodological quality. Risk of bias in included studies will be assessed using the Cochrane Collaboration risk of bias tool criteria. Two qualified coders will independently code behaviour change techniques according to the behaviour change taxonomy (v1) of 93 hierarchically clustered techniques and a novel coding scheme for mode of delivery and usability factors. A quantitative synthesis will be conducted if appropriate. The findings of this review may offer insight for healthcare professionals working in chronic pain services and to researchers involved in designing and evaluating information and communication technology-based interventions. PROSPERO CRD42016017657.

Benchmarking Evaluation Results for Prototype Extravehicular Activity Gloves

NASA Technical Reports Server (NTRS)

Aitchison, Lindsay; McFarland, Shane

2012-01-01

The Space Suit Assembly (SSA) Development Team at NASA Johnson Space Center has invested heavily in the advancement of rear-entry planetary exploration suit design but largely deferred development of extravehicular activity (EVA) glove designs, and accepted the risk of using the current flight gloves, Phase VI, for unique mission scenarios outside the Space Shuttle and International Space Station (ISS) Program realm of experience. However, as design reference missions mature, the risks of using heritage hardware have highlighted the need for developing robust new glove technologies. To address the technology gap, the NASA Game-Changing Technology group provided start-up funding for the High Performance EVA Glove (HPEG) Project in the spring of 2012. The overarching goal of the HPEG Project is to develop a robust glove design that increases human performance during EVA and creates pathway for future implementation of emergent technologies, with specific aims of increasing pressurized mobility to 60% of barehanded capability, increasing the durability by 100%, and decreasing the potential of gloves to cause injury during use. The HPEG Project focused initial efforts on identifying potential new technologies and benchmarking the performance of current state of the art gloves to identify trends in design and fit leading to establish standards and metrics against which emerging technologies can be assessed at both the component and assembly levels. The first of the benchmarking tests evaluated the quantitative mobility performance and subjective fit of four prototype gloves developed by Flagsuit LLC, Final Frontier Designs, LLC Dover, and David Clark Company as compared to the Phase VI. All of the companies were asked to design and fabricate gloves to the same set of NASA provided hand measurements (which corresponded to a single size of Phase Vi glove) and focus their efforts on improving mobility in the metacarpal phalangeal and carpometacarpal joints. Four test subjects representing the design ]to hand anthropometry completed range of motion, grip/pinch strength, dexterity, and fit evaluations for each glove design in both the unpressurized and pressurized conditions. This paper provides a comparison of the test results along with a detailed description of hardware and test methodologies used.

Review of mobile communication devices as potential reservoirs of nosocomial pathogens.

PubMed

Brady, R R W; Verran, J; Damani, N N; Gibb, A P

2009-04-01

Innovation in mobile communication technology has provided novel approaches to the delivery of healthcare and improvements in the speed and quality of routine medical communication. Bacterial contamination of mobile communication devices (MCDs) could be an important issue affecting the implementation of effective infection control measures and might have an impact on efforts to reduce cross-contamination. This review examines recent studies reporting bacterial contamination of MCDs, most demonstrating that 9-25% of MCDs are contaminated with pathogenic bacteria. We examine previously investigated risk factors for MCD contamination in addition to work on surface decontamination of the device. Recommendations to reduce contamination risks include staff education, strict hand hygiene measures, guidelines on device cleaning and consideration of the restrictions regarding use of mobile phone technology in certain high risk areas, for example, operating theatres, intensive care units and burns units. Further work is required to evaluate the benefit of such interventions on MCD contamination and to determine whether a link exists between contamination and subsequent patient infection.

Benchmarking on the evaluation of major accident-related risk assessment.

PubMed

Fabbri, Luciano; Contini, Sergio

2009-03-15

This paper summarises the main results of a European project BEQUAR (Benchmarking Exercise in Quantitative Area Risk Assessment in Central and Eastern European Countries). This project is among the first attempts to explore how independent evaluations of the same risk study associated with a certain chemical establishment could differ from each other and the consequent effects on the resulting area risk estimate. The exercise specifically aimed at exploring the manner and degree to which independent experts may disagree on the interpretation of quantitative risk assessments for the same entity. The project first compared the results of a number of independent expert evaluations of a quantitative risk assessment study for the same reference chemical establishment. This effort was then followed by a study of the impact of the different interpretations on the estimate of the overall risk on the area concerned. In order to improve the inter-comparability of the results, this exercise was conducted using a single tool for area risk assessment based on the ARIPAR methodology. The results of this study are expected to contribute to an improved understanding of the inspection criteria and practices used by the different national authorities responsible for the implementation of the Seveso II Directive in their countries. The activity was funded under the Enlargement and Integration Action of the Joint Research Centre (JRC), that aims at providing scientific and technological support for promoting integration of the New Member States and assisting the Candidate Countries on their way towards accession to the European Union.

The application of decision analysis to life support research and technology development

NASA Technical Reports Server (NTRS)

Ballin, Mark G.

1994-01-01

Applied research and technology development is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Decision making regarding which technologies to advance and what resources to devote to them is a challenging but essential task. In the application of life support technology to future manned space flight, new technology concepts typically are characterized by nonexistent data and rough approximations of technology performance, uncertain future flight program needs, and a complex, time-intensive process to develop technology to a flight-ready status. Decision analysis is a quantitative, logic-based discipline that imposes formalism and structure to complex problems. It also accounts for the limits of knowledge that may be available at the time a decision is needed. The utility of decision analysis to life support technology R & D was evaluated by applying it to two case studies. The methodology was found to provide insight that is not possible from more traditional analysis approaches.

Engaging with residents' perceived risks and benefits about technologies as a way of resolving remediation dilemmas.

PubMed

Prior, Jason; Rai, Tapan

2017-12-01

In recent decades the diversity of remediation technologies has increased significantly, with the breadth of technologies ranging from dig and dump to emergent technologies like phytoremediation and nanoremediation. The benefits of these technologies to the environment and human health are believed to be substantial. However, they also potentially constitute risks. Whilst there is a growing body of knowledge about the risks and benefits of these technologies from the perspective of experts, little is known about how residents perceive the risks and benefits of the application of these technologies to address contaminants in their local environment. This absence of knowledge poses a challenge to remediation practitioners and policy makers who are increasingly seeking to engage these affected local residents in choosing technology applications. Building on broader research into the perceived benefits and risks of technologies, and data from a telephone survey of 2009 residents living near 13 contaminated sites in Australia, regression analysis of closed-ended survey questions and coding of open-ended questions are combined to identify the main predictors of resident's perceived levels of risk and benefit to resident's health and to their local environment from remediation technologies. This research identifies a range of factors associated with the residents' physical context, their engagement with institutions during remediation processes, and the technologies which are associated with residents' level of perceived risk and benefit for human health and the local environment. The analysis found that bioremediation technologies were perceived as less risky and more beneficial than chemical, thermal and physical technologies. The paper also supports broader technology research that reports an inverse correlation between levels of perceived risks and benefits. In addition, the paper reveals the types of risks and benefits to human health and the local environment that residents most commonly associate with remediation technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

NASA Technical Reports Server (NTRS)

Lewis, Pattie L.

2009-01-01

In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

Evaluation methods for assessing effectiveness of in situ remediation of soil and sediment contaminated with organic pollutants and heavy metals.

PubMed

Song, Biao; Zeng, Guangming; Gong, Jilai; Liang, Jie; Xu, Piao; Liu, Zhifeng; Zhang, Yi; Zhang, Chen; Cheng, Min; Liu, Yang; Ye, Shujing; Yi, Huan; Ren, Xiaoya

2017-08-01

Soil and sediment contamination has become a critical issue worldwide due to its great harm to the ecological environment and public health. In recent years, many remediation technologies including physical, chemical, biological, and combined methods have been proposed and adopted for the purpose of solving the problems of soil and sediment contamination. However, current research on evaluation methods for assessing these remediation technologies is scattered and lacks valid and integrated evaluation methods for assessing the remediation effectiveness. This paper provides a comprehensive review with an environmental perspective on the evaluation methods for assessing the effectiveness of in situ remediation of soil and sediment contaminated with organic pollutants and heavy metals. The review systematically summarizes recent exploration and attempts of the remediation effectiveness assessment based on the content of pollutants, soil and sediment characteristics, and ecological risks. Moreover, limitations and future research needs of the practical assessment are discussed. These limitations are not conducive to the implementation of the abatement and control programs for soil and sediment contamination. Therefore, more attention should be paid to the evaluation methods for assessing the remediation effectiveness while developing new in situ remediation technologies in future research. Copyright © 2017 Elsevier Ltd. All rights reserved.

A systematic review of balance and fall risk assessments with mobile phone technology.

PubMed

Roeing, Kathleen L; Hsieh, Katherine L; Sosnoff, Jacob J

2017-11-01

Falls are a major health concern for older adults. Preventative measures can help reduce the incidence and severity of falls. Methods for assessing balance and fall risk factors are necessary to effectively implement preventative measures. Research groups are currently developing mobile applications to enable seniors, caregivers, and clinicians to monitor balance and fall risk. The following systematic review assesses the current state of mobile health apps for testing balance as a fall risk factor. Thirteen studies were identified and included in the review and analyzed based on study design, population, sample size, measures of balance, main outcome measures, and evaluation of validity and reliability. All studies successfully tested their applications, but only 38% evaluated the validity, and 23% evaluated the reliability of their applications. Of those, all applications were found to accurately and reliably measure balance on select variables. Four of the 13 studies included special populations groups. Out of the 13 studies, 12 reported clinicians as their intended user and seven reported seniors as their intended user. Further research should examine the validity of mobile health applications as well as report on the application's usability. Copyright © 2017 Elsevier B.V. All rights reserved.

Exploring the sociotechnical intersection of patient safety and electronic health record implementation

PubMed Central

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-01-01

Objective The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). Methods We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). Results The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human–computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. Discussion We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Conclusions Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology. PMID:24052536

Exploring the sociotechnical intersection of patient safety and electronic health record implementation.

PubMed

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-02-01

The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human-computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology.

Clinical relevance of endoscopic assessment of inflammation in ulcerative colitis: Can endoscopic evaluation predict outcomes?

PubMed Central

Mohammed, Noor; Subramanian, Venkataraman

2016-01-01

Ulcerative colitis (UC) is a chronic inflammatory bowel condition characterised by a relapsing and remitting course. Symptom control has been the traditional mainstay of medical treatment. It is well known that histological inflammatory activity persists despite adequate symptom control and absence of endoscopic inflammation. Current evidence suggests that presence of histological inflammation poses a greater risk of disease relapse and subsequent colorectal cancer risk. New endoscopic technologies hold promise for developing endoscopic markers of mucosal inflammation. Achieving endoscopic and histological remission appears be the future aim of medical treatments for UC. This review article aims to evaluate the use of endoscopy as a tool in assessment of mucosal inflammation UC and its correlation with disease outcomes. PMID:27895420

Model Checking for Verification of Interactive Health IT Systems

PubMed Central

Butler, Keith A.; Mercer, Eric; Bahrami, Ali; Tao, Cui

2015-01-01

Rigorous methods for design and verification of health IT systems have lagged far behind their proliferation. The inherent technical complexity of healthcare, combined with the added complexity of health information technology makes their resulting behavior unpredictable and introduces serious risk. We propose to mitigate this risk by formalizing the relationship between HIT and the conceptual work that increasingly typifies modern care. We introduce new techniques for modeling clinical workflows and the conceptual products within them that allow established, powerful modeling checking technology to be applied to interactive health IT systems. The new capability can evaluate the workflows of a new HIT system performed by clinicians and computers to improve safety and reliability. We demonstrate the method on a patient contact system to demonstrate model checking is effective for interactive systems and that much of it can be automated. PMID:26958166

Study designs for identifying risk compensation behavior among users of biomedical HIV prevention technologies: balancing methodological rigor and research ethics.

PubMed

Underhill, Kristen

2013-10-01

The growing evidence base for biomedical HIV prevention interventions - such as oral pre-exposure prophylaxis, microbicides, male circumcision, treatment as prevention, and eventually prevention vaccines - has given rise to concerns about the ways in which users of these biomedical products may adjust their HIV risk behaviors based on the perception that they are prevented from infection. Known as risk compensation, this behavioral adjustment draws on the theory of "risk homeostasis," which has previously been applied to phenomena as diverse as Lyme disease vaccination, insurance mandates, and automobile safety. Little rigorous evidence exists to answer risk compensation concerns in the biomedical HIV prevention literature, in part because the field has not systematically evaluated the study designs available for testing these behaviors. The goals of this Commentary are to explain the origins of risk compensation behavior in risk homeostasis theory, to reframe risk compensation as a testable response to the perception of reduced risk, and to assess the methodological rigor and ethical justification of study designs aiming to isolate risk compensation responses. Although the most rigorous methodological designs for assessing risk compensation behavior may be unavailable due to ethical flaws, several strategies can help investigators identify potential risk compensation behavior during Phase II, Phase III, and Phase IV testing of new technologies. Where concerns arise regarding risk compensation behavior, empirical evidence about the incidence, types, and extent of these behavioral changes can illuminate opportunities to better support the users of new HIV prevention strategies. This Commentary concludes by suggesting a new way to conceptualize risk compensation behavior in the HIV prevention context. Copyright © 2013 Elsevier Ltd. All rights reserved.

Study designs for identifying risk compensation behavior among users of biomedical HIV prevention technologies: Balancing methodological rigor and research ethics

PubMed Central

Underhill, Kristen

2014-01-01

The growing evidence base for biomedical HIV prevention interventions – such as oral pre-exposure prophylaxis, microbicides, male circumcision, treatment as prevention, and eventually prevention vaccines – has given rise to concerns about the ways in which users of these biomedical products may adjust their HIV risk behaviors based on the perception that they are prevented from infection. Known as risk compensation, this behavioral adjustment draws on the theory of “risk homeostasis,” which has previously been applied to phenomena as diverse as Lyme disease vaccination, insurance mandates, and automobile safety. Little rigorous evidence exists to answer risk compensation concerns in the biomedical HIV prevention literature, in part because the field has not systematically evaluated the study designs available for testing these behaviors. The goals of this Commentary are to explain the origins of risk compensation behavior in risk homeostasis theory, to reframe risk compensation as a testable response to the perception of reduced risk, and to assess the methodological rigor and ethical justification of study designs aiming to isolate risk compensation responses. Although the most rigorous methodological designs for assessing risk compensation behavior may be unavailable due to ethical flaws, several strategies can help investigators identify potential risk compensation behavior during Phase II, Phase III, and Phase IV testing of new technologies. Where concerns arise regarding risk compensation behavior, empirical evidence about the incidence, types, and extent of these behavioral changes can illuminate opportunities to better support the users of new HIV prevention strategies. This Commentary concludes by suggesting a new way to conceptualize risk compensation behavior in the HIV prevention context. PMID:23597916

Approaches to acceptable risk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whipple, C

Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, inmore » a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.« less

Mission Systems Open Architecture Science and Technology (MOAST) program

NASA Astrophysics Data System (ADS)

Littlejohn, Kenneth; Rajabian-Schwart, Vahid; Kovach, Nicholas; Satterthwaite, Charles P.

2017-04-01

The Mission Systems Open Architecture Science and Technology (MOAST) program is an AFRL effort that is developing and demonstrating Open System Architecture (OSA) component prototypes, along with methods and tools, to strategically evolve current OSA standards and technical approaches, promote affordable capability evolution, reduce integration risk, and address emerging challenges [1]. Within the context of open architectures, the program is conducting advanced research and concept development in the following areas: (1) Evolution of standards; (2) Cyber-Resiliency; (3) Emerging Concepts and Technologies; (4) Risk Reduction Studies and Experimentation; and (5) Advanced Technology Demonstrations. Current research includes the development of methods, tools, and techniques to characterize the performance of OMS data interconnection methods for representative mission system applications. Of particular interest are the OMS Critical Abstraction Layer (CAL), the Avionics Service Bus (ASB), and the Bulk Data Transfer interconnects, as well as to develop and demonstrate cybersecurity countermeasures techniques to detect and mitigate cyberattacks against open architecture based mission systems and ensure continued mission operations. Focus is on cybersecurity techniques that augment traditional cybersecurity controls and those currently defined within the Open Mission System and UCI standards. AFRL is also developing code generation tools and simulation tools to support evaluation and experimentation of OSA-compliant implementations.

Technology Challenges for Deep-Throttle Cryogenic Engines for Space Exploration

NASA Technical Reports Server (NTRS)

Brown, Kendall K.; Nelson, Karl W.

2005-01-01

Historically, cryogenic rocket engines have not been used for in-space applications due to their additional complexity, the mission need for high reliability, and the challenges of propellant boil-off. While the mission and vehicle architectures are not yet defined for the lunar and Martian robotic and human exploration objectives, cryogenic rocket engines offer the potential for higher performance and greater architecture/mission flexibility. In-situ cryogenic propellant production could enable a more robust exploration program by significantly reducing the propellant mass delivered to low earth orbit, thus warranting the evaluation of cryogenic rocket engines versus the hypergolic bi-propellant engines used in the Apollo program. A multi-use engine. one which can provide the functionality that separate engines provided in the Apollo mission architecture, is desirable for lunar and Mars exploration missions because it increases overall architecture effectiveness through commonality and modularity. The engine requirement derivation process must address each unique mission application and each unique phase within each mission. The resulting requirements, such as thrust level, performance, packaging, bum duration, number of operations; required impulses for each trajectory phase; operation after extended space or surface exposure; availability for inspection and maintenance; throttle range for planetary descent, ascent, acceleration limits and many more must be addressed. Within engine system studies, the system and component technology, capability, and risks must be evaluated and a balance between the appropriate amount of technology-push and technology-pull must be addressed. This paper will summarize many of the key technology challenges associated with using high-performance cryogenic liquid propellant rocket engine systems and components in the exploration program architectures. The paper is divided into two areas. The first area describes how the mission requirements affect the engine system requirements and create system level technology challenges. An engine system architecture for multiple applications or a family of engines based upon a set of core technologies, design, and fabrication approaches may reduce overall programmatic cost and risk. The engine system discussion will also address the characterization of engine cycle figures of merit, configurations, and design approaches for some in-space vehicle alternatives under consideration. The second area evaluates the component-level technology challenges induced from the system requirements. Component technology issues are discussed addressing injector, thrust chamber, ignition system, turbopump assembly, and valve design for the challenging requirements of high reliability, robustness, fault tolerance, deep throttling, reasonable performance (with respect to weight and specific impulse).

Technology Challenges for Deep-Throttle Cryogenic Engines for Space Exploration

NASA Astrophysics Data System (ADS)

Brown, Kendall K.; Nelson, Karl W.

2005-02-01

Historically, cryogenic rocket engines have not been used for in-space applications due to their additional complexity, the mission need for high reliability, and the challenges of propellant boil-off. While the mission and vehicle architectures are not yet defined for the lunar and Martian robotic and human exploration objectives, cryogenic rocket engines offer the potential for higher performance and greater architecture/mission flexibility. In-situ cryogenic propellant production could enable a more robust exploration program by significantly reducing the propellant mass delivered to low earth orbit, thus warranting the evaluation of cryogenic rocket engines versus the hypergolic bipropellant engines used in the Apollo program. A multi-use engine, one which can provide the functionality that separate engines provided in the Apollo mission architecture, is desirable for lunar and Mars exploration missions because it increases overall architecture effectiveness through commonality and modularity. The engine requirement derivation process must address each unique mission application and each unique phase within each mission. The resulting requirements, such as thrust level, performance, packaging, burn duration, number of operations; required impulses for each trajectory phase; operation after extended space or surface exposure; availability for inspection and maintenance; throttle range for planetary descent, ascent, acceleration limits and many more must be addressed. Within engine system studies, the system and component technology, capability, and risks must be evaluated and a balance between the appropriate amount of technology-push and technology-pull must be addressed. This paper will summarize many of the key technology challenges associated with using high-performance cryogenic liquid propellant rocket engine systems and components in the exploration program architectures. The paper is divided into two areas. The first area describes how the mission requirements affect the engine system requirements and create system level technology challenges. An engine system architecture for multiple applications or a family of engines based upon a set of core technologies, design, and fabrication approaches may reduce overall programmatic cost and risk. The engine system discussion will also address the characterization of engine cycle figures of merit, configurations, and design approaches for some in-space vehicle alternatives under consideration. The second area evaluates the component-level technology challenges induced from the system requirements. Component technology issues are discussed addressing injector, thrust chamber, ignition system, turbopump assembly, and valve design for the challenging requirements of high reliability, robustness, fault tolerance, deep throttling, reasonable performance (with respect to weight and specific impulse).

A Systematic Review of Mobile Health Technology Use in Developing Countries.

PubMed

Alghamdi, Manal; Gashgari, Horeya; Househ, Mowafa

2015-01-01

In developing countries, patients are now more informed about their healthcare options as a result of their use of mobile health (mHealth) technologies. The purpose of this paper is to describe the opportunities and challenges in using mHealth technologies for developing countries. In April 2015, Google Scholar and PubMed were searched to identify articles discussing the types, advantages and disadvantages, effectiveness, evaluation of mHealth technologies, and examples of mHealth implementation in developing countries. A total number of 3,803 articles were retrieved from both databases. Articles reporting the benefits and risks, effectiveness, and evaluation of mHealth were included. Articles that were written in English and from developing countries were also included. We excluded papers that were published before 2005, not written in English, and that were technical in nature. After screening the articles using the inclusion and exclusion criteria, 27 articles were selected for inclusion in the study. Of the 27 papers included in the review, eight described opportunities and challenges relating to mHealth, four focused on smoking cessation, three focused on weight loss, and four papers focused on chronic diseases. We also identified four articles discussing mHealth evaluation and four discussing the use of mHealth as a health promotion tool. We conclude that mHealth can improve healthcare delivery for developing countries. Some of the advantages of mHealth include: patient education, health promotion, disease self-management, decrease in healthcare costs, and remote monitoring of patients. However, there are several limitations in using mHealth technologies for developing countries, which include: interoperability, lack of evaluation standards, and lack of a technology infrastructure.

Development and Implementation of a Design Metric for Systems Containing Long-Term Fluid Loops

NASA Technical Reports Server (NTRS)

Steele, John W.

2016-01-01

John Steele, a chemist and technical fellow from United Technologies Corporation, provided a water quality module to assist engineers and scientists with a metric tool to evaluate risks associated with the design of space systems with fluid loops. This design metric is a methodical, quantitative, lessons-learned based means to evaluate the robustness of a long-term fluid loop system design. The tool was developed by a cross-section of engineering disciplines who had decades of experience and problem resolution.

Digital technology to facilitate Proactive Assessment of Obesity Risk during Infancy (ProAsk): a feasibility study

PubMed Central

Rose, Jennie; Ablewhite, Joanne; Swift, Judy Anne; Nathan, Dilip; Atkinson, Pippa; Watson, Vicki; McMaster, Fiona

2017-01-01

Objective To assess the feasibility and acceptability of using digital technology for Proactive Assessment of Obesity Risk during Infancy (ProAsk) with the UK health visitors (HVs) and parents. Design Multicentre, pre- and post-intervention feasibility study with process evaluation. Setting Rural and urban deprived settings, UK community care. Participants 66 parents of infants and 22 HVs. Intervention ProAsk was delivered on a tablet device. It comprises a validated risk prediction tool to quantify overweight risk status and a therapeutic wheel detailing motivational strategies for preventive parental behaviour. Parents were encouraged to agree goals for behaviour change with HVs who received motivational interviewing training. Outcome measures We assessed recruitment, response and attrition rates. Demographic details were collected, and overweight risk status. The proposed primary outcome measure was weight-for-age z-score. The proposed secondary outcomes were parenting self-efficacy, maternal feeding style, infant diet and exposure to physical activity/sedentary behaviour. Qualitative interviews ascertained the acceptability of study processes and intervention fidelity. Results HVs screened 324/589 infants for inclusion in the study and 66/226 (29%) eligible infants were recruited. Assessment of overweight risk was completed on 53 infants and 40% of these were identified as above population risk. Weight-for-age z-score (SD) between the infants at population risk and those above population risk differed significantly at baseline (−0.67 SD vs 0.32 SD). HVs were able to collect data and calculate overweight risk for the infants. Protocol adherence and intervention fidelity was a challenge. HVs and parents found the information provided in the therapeutic wheel appropriate and acceptable. Conclusion Study recruitment and protocol adherence were problematic. ProAsk was acceptable to most parents and HVs, but intervention fidelity was low. There was limited evidence to support the feasibility of implementing ProAsk without significant additional resources. A future study could evaluate ProAsk as a HV-supported, parent-led intervention. Trial registration number NCT02314494 (Feasibility Study Results) PMID:28882926

Earth observation technologies in service to the cultural landscape of Cyprus: risk identification and assessment

NASA Astrophysics Data System (ADS)

Cuca, Branka; Tzouvaras, Marios; Agapiou, Athos; Lysandrou, Vasiliki; Themistocleous, Kyriacos; Nisantzi, Argyro; Hadjimitsis, Diofantos G.

2016-08-01

The Cultural landscapes are witnesses of "the creative genius, social development and the imaginative and spiritual vitality of humanity. They are part of our collective identity", as it is internationally defined and accepted (ICOMOSUNESCO). The need for their protection, management and inclusion in the territorial policies has already been widely accepted and pursued. There is a great number of risks to which the cultural landscapes are exposed, arising mainly from natural (both due to slow geo-physical phenomena as well as hazards) and anthropogenic causes (e.g. urbanisation pressure, agriculture, landscape fragmentation etc.). This paper explores to what extent Earth Observation (EO) technologies can contribute to identify and evaluate the risks to which Cultural Landscapes of Cyprus are exposed, taking into consideration specific phenomena, such as land movements and soil erosion. The research of the paper is illustrated as part of the activities carried out in the CLIMA project - "Cultural Landscape risk Identification, Management and Assessment". It aims to combine the fields of remote sensing technologies, including Sentinel data, and monitoring of cultural landscape for its improved protection and management. Part of this approach will be based on the use of InSAR techniques in order to monitor the temporal evolution of deformations through the detection and measurement of the effects of surface movements caused by various factors. The case study selected for Cyprus is the Nea Paphos archeological site and historical center of Paphos, which are listed as UNESCO World Heritage sites. The interdisciplinary approach adopted in this research was useful to identify major risks affecting the landscape of Cyprus and to classify the most suitable EO methods to assess and map such risks.

Delivery and Evaluation of Synchronous Online Reading Tutoring to Students At-Risk of Reading Failure

ERIC Educational Resources Information Center

Vasquez, Eleazar, III; Forbush, David E.; Mason, Lee L.; Lockwood, April R.; Gleed, Linsey

2011-01-01

In a technological society, demands for higher literacy are ever increasing, creating grievous consequences for those who fail to meet these demands (National Research Council, 1998). Both legislative mandates, such as NCLB, and developments in the provision of reading instruction, such as RtI, have increased the demand for high quality tutoring…

Lessons Learned from the Private Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robichaud, Robert J

This session is focused on lessons learned from private sector energy projects that could be applied to the federal sector. This presentation tees up the subsequent presentations by outlining the differences between private and federal sectors in objectives, metrics for determining success, funding resources/mechanisms, payback and ROI evaluation, risk tolerance/aversion, new technology adoption perspectives, and contracting mechanisms.

A College-Level Foundational Mathematics Course: Evaluation, Challenges, and Future Directions

ERIC Educational Resources Information Center

Maciejewski, Wes

2012-01-01

Recently in Ontario, Canada, the College Math Project brought to light startling data on the achievement of students in Ontario's College of Applied Arts and Technology System related to their performance in first-year mathematics courses: one-third of the students had failed their first-year mathematics course or were at risk of not completing…

Methods and strategies for future reactor safety goals

NASA Astrophysics Data System (ADS)

Arndt, Steven Andrew

There have been significant discussions over the past few years by the United States Nuclear Regulatory Commission (NRC), the Advisory Committee on Reactor Safeguards (ACRS), and others as to the adequacy of the NRC safety goals for use with the next generation of nuclear power reactors to be built in the United States. The NRC, in its safety goals policy statement, has provided general qualitative safety goals and basic quantitative health objectives (QHOs) for nuclear reactors in the United States. Risk metrics such as core damage frequency (CDF) and large early release frequency (LERF) have been used as surrogates for the QHOs. In its review of the new plant licensing policy the ACRS has looked at the safety goals, as has the NRC. A number of issues have been raised including what the Commission had in mind when it drafted the safety goals and QHOs, how risk from multiple reactors at a site should be combined for evaluation, how the combination of a new and old reactor at the same site should be evaluated, what the criteria for evaluating new reactors should be, and whether new reactors should be required to be safer than current generation reactors. As part of the development and application of the NRC safety goal policy statement the Commissioners laid out the expectations for the safety of a nuclear power plant but did not address the risk associated with current multi-unit sites, potential modular reactor sites, and hybrid sites that could contain current generation reactors, new passive reactors, and/or modular reactors. The NRC safety goals and the QHOs refer to a "nuclear power plant," but do not discuss whether a "plant" refers to only a single unit or all of the units on a site. There has been much discussion on this issue recently due to the development of modular reactors. Additionally, the risk of multiple reactor accidents on the same site has been largely ignored in the probabilistic risk assessments (PRAs) done to date, and in most risk-informed analyses and discussions. This dissertation examines potential approaches to updating the safety goals that include the establishment of new quantitative safety goal associated with the comparative risk of generating electricity by viable competing technologies and modifications of the goals to account for multi-plant reactor sites, and issues associated with the use of safety goals in both initial licensing and operational decision making. This research develops a new quantitative health objective that uses a comparable benefit risk metric based on the life-cycle risk of the construction, operation and decommissioning of a comparable non-nuclear electric generation facility, as well as the risks associated with mining and transportation. This dissertation also evaluates the effects of using various methods for aggregating site risk as a safety metric, as opposed to using single plant safety goals. Additionally, a number of important assumptions inherent in the current safety goals, including the effect of other potential negative societal effects such as the generation of greenhouse gases (e.g., carbon dioxide) have on the risk of electric power production and their effects on the setting of safety goals, is explored. Finally, the role risk perception should play in establishing safety goals has been explored. To complete this evaluation, a new method to analytically compare alternative technologies of generating electricity was developed, including development of a new way to evaluate risk perception, and a new method was developed for evaluating the risk at multiple units on a single site. To test these modifications to the safety goals a number of possible reactor designs and configurations were evaluated using these new proposed safety goals to determine the goals' usefulness and utility. The results of the analysis showed that the modifications provide measures that more closely evaluate the potential risk to the public from the operation of nuclear power plants than the current safety goals, while still providing a straight-forward process for assessment of reactor design and operation.

Implications of previous space commercialization experiences for the reusable launch vehicle

NASA Astrophysics Data System (ADS)

Obermann, Richard M.; Williamson, Ray A.

2003-07-01

The United States' 1994 National Space Transportation Policy directed the National Aeronautics and Space Administration (NASA) to work with industry on the development of technologies required for a reusable launch vehicle (RLV). In the partnership that has evolved from that directive, NASA envisions its role as providing support for technological risk reduction and for developing space transportation to serve government needs. NASA officials assume that the development of an operational, commercial RLV will be carried out by the private sector without use of government funds. Under that scenario, the Federal government will simply become a customer for commercial RLV services. In evaluating the prospects for the development of a commercially viable RLV, it may be useful to examine "lessons learned" from previous space commercialization efforts—both those that succeeded and those that did not. It can be argued that several distinct streams of market and technological development may have to converge for successful commercialization of space systems to occur. Potential factors influencing the prospects for commercialization include the size and growth rate of the potential customer base, the extent to which a governmental customer exists to underpin the market, the development of associated "value-added" markets, the stability of governmental policies, the levels of technological and business risk, and the degree to which competitive markets exist. This paper examines two previous space commercialization experiences, evaluates the relative importance of the various factors that influence the prospects for success of commercialization efforts, and assesses the implications of those factors for the commercial viability of the proposed RLV.

Clinical engineering and risk management in healthcare technological process using architecture framework.

PubMed

Signori, Marcos R; Garcia, Renato

2010-01-01

This paper presents a model that aids the Clinical Engineering to deal with Risk Management in the Healthcare Technological Process. The healthcare technological setting is complex and supported by three basics entities: infrastructure (IS), healthcare technology (HT), and human resource (HR). Was used an Enterprise Architecture - MODAF (Ministry of Defence Architecture Framework) - to model this process for risk management. Thus, was created a new model to contribute to the risk management in the HT process, through the Clinical Engineering viewpoint. This architecture model can support and improve the decision making process of the Clinical Engineering to the Risk Management in the Healthcare Technological process.

The first step in the development of text mining technology for cancer risk assessment: identifying and organizing scientific evidence in risk assessment literature

PubMed Central

Korhonen, Anna; Silins, Ilona; Sun, Lin; Stenius, Ulla

2009-01-01

Background One of the most neglected areas of biomedical Text Mining (TM) is the development of systems based on carefully assessed user needs. We have recently investigated the user needs of an important task yet to be tackled by TM -- Cancer Risk Assessment (CRA). Here we take the first step towards the development of TM technology for the task: identifying and organizing the scientific evidence required for CRA in a taxonomy which is capable of supporting extensive data gathering from biomedical literature. Results The taxonomy is based on expert annotation of 1297 abstracts downloaded from relevant PubMed journals. It classifies 1742 unique keywords found in the corpus to 48 classes which specify core evidence required for CRA. We report promising results with inter-annotator agreement tests and automatic classification of PubMed abstracts to taxonomy classes. A simple user test is also reported in a near real-world CRA scenario which demonstrates along with other evaluation that the resources we have built are well-defined, accurate, and applicable in practice. Conclusion We present our annotation guidelines and a tool which we have designed for expert annotation of PubMed abstracts. A corpus annotated for keywords and document relevance is also presented, along with the taxonomy which organizes the keywords into classes defining core evidence for CRA. As demonstrated by the evaluation, the materials we have constructed provide a good basis for classification of CRA literature along multiple dimensions. They can support current manual CRA as well as facilitate the development of an approach based on TM. We discuss extending the taxonomy further via manual and machine learning approaches and the subsequent steps required to develop TM technology for the needs of CRA. PMID:19772619

The state of knowledge on technologies and their use for fall detection: A scoping review.

PubMed

Lapierre, N; Neubauer, N; Miguel-Cruz, A; Rios Rincon, A; Liu, L; Rousseau, J

2018-03-01

Globally, populations are aging with increasing life spans. The normal aging process and the resulting disabilities increase fall risks. Falls are an important cause of injury, loss of independence and institutionalization. Technologies have been developed to detect falls and reduce their consequences but their use and impact on quality of life remain debatable. Reviews on fall detection technologies exist but are not extensive. A comprehensive literature review on the state of knowledge of fall detection technologies can inform research, practice, and user adoption. To examine the extent and the diversity of current technologies for fall detection in older adults. A scoping review design was used to search peer-reviewed literature on technologies to detect falls, published in English, French or Spanish since 2006. Data from the studies were analyzed descriptively. The literature search identified 3202 studies of which 118 were included for analysis. Ten types of technologies were identified ranging from wearable (e.g., inertial sensors) to ambient sensors (e.g., vision sensors). Their Technology Readiness Level was low (mean 4.54 SD 1.25; 95% CI [4.31, 4.77] out of a maximum of 9). Outcomes were typically evaluated on technological basis and in controlled environments. Few were evaluated in home settings or care units with older adults. Acceptability, implementation cost and barriers were seldom addressed. Further research should focus on increasing Technology Readiness Levels of fall detection technologies by testing them in real-life settings with older adults. Copyright © 2017 Elsevier B.V. All rights reserved.

A Pilot Study on Developing a Standardized and Sensitive School Violence Risk Assessment with Manual Annotation.

PubMed

Barzman, Drew H; Ni, Yizhao; Griffey, Marcus; Patel, Bianca; Warren, Ashaki; Latessa, Edward; Sorter, Michael

2017-09-01

School violence has increased over the past decade and innovative, sensitive, and standardized approaches to assess school violence risk are needed. In our current feasibility study, we initialized a standardized, sensitive, and rapid school violence risk approach with manual annotation. Manual annotation is the process of analyzing a student's transcribed interview to extract relevant information (e.g., key words) to school violence risk levels that are associated with students' behaviors, attitudes, feelings, use of technology (social media and video games), and other activities. In this feasibility study, we first implemented school violence risk assessments to evaluate risk levels by interviewing the student and parent separately at the school or the hospital to complete our novel school safety scales. We completed 25 risk assessments, resulting in 25 transcribed interviews of 12-18 year olds from 15 schools in Ohio and Kentucky. We then analyzed structured professional judgments, language, and patterns associated with school violence risk levels by using manual annotation and statistical methodology. To analyze the student interviews, we initiated the development of an annotation guideline to extract key information that is associated with students' behaviors, attitudes, feelings, use of technology and other activities. Statistical analysis was applied to associate the significant categories with students' risk levels to identify key factors which will help with developing action steps to reduce risk. In a future study, we plan to recruit more subjects in order to fully develop the manual annotation which will result in a more standardized and sensitive approach to school violence assessments.

NASA Workshop on Technology for Human Robotic Exploration and Development of Space

NASA Technical Reports Server (NTRS)

Mankins, J. C.; Marzwell, N.; Mullins, C. A.; Christensen, C. B.; Howell, J. T.; O'Neil, D. A.

2004-01-01

Continued constrained budgets and growing interests in the industrialization and development of space requires NASA to seize every opportunity for assuring the maximum return on space infrastructure investments. This workshop provided an excellent forum for reviewing, evaluating, and updating pertinent strategic planning, identifying advanced concepts and high-risk/high-leverage research and technology requirements, developing strategies and roadmaps, and establishing approaches, methodologies, modeling, and tools for facilitating the commercial development of space and supporting diverse exploration and scientific missions. Also, the workshop addressed important topic areas including revolutionary space systems requiring investments in innovative advanced technologies; achieving transformational space operations through the insertion of new technologies; revolutionary science in space through advanced systems and new technologies enabling experiments to go anytime to any location; and, innovative and ambitious concepts and approaches essential for promoting advancements in space transportation. Details concerning the workshop process, structure, and results are contained in the ensuing report.

Developing Fabrication Technologies to Provide On Demand Manufacturing for Exploration of the Moon and Mars

NASA Technical Reports Server (NTRS)

Hammond, Monica S.; Good, James E.; Gilley, Scott D.; Howard, Richard W.

2006-01-01

NASA's human exploration initiative poses great opportunity and risk for manned and robotic missions to the Moon, Mars, and beyond. Engineers and scientists at the Marshall Space Flight Center (MSFC) are developing technologies for in situ fabrication capabilities during lunar and Martian surface operations utilizing provisioned and locally refined materials. Current fabrication technologies must be advanced to support the special demands and applications of the space exploration initiative such as power, weight and volume constraints. In Situ Fabrication and Repair (ISFR) will advance state-of-the-art technologies in support of habitat structure development, tools, and mechanical part fabrication. The repair and replacement of space mission components, such as life support items or crew exercise equipment, fall within the ISFR scope. This paper will address current fabrication technologies relative to meeting ISFR targeted capabilities, near-term advancement goals, and systematic evaluation of various fabrication methods.

Societal Risk Evaluation Scheme (SRES): Scenario-Based Multi-Criteria Evaluation of Synthetic Biology Applications

PubMed Central

2017-01-01

Synthetic biology (SB) applies engineering principles to biology for the construction of novel biological systems designed for useful purposes. From an oversight perspective, SB products come with significant uncertainty. Yet there is a need to anticipate and prepare for SB applications before deployment. This study develops a Societal Risk Evaluation Scheme (SRES) in order to advance methods for anticipatory governance of emerging technologies such as SB. The SRES is based upon societal risk factors that were identified as important through a policy Delphi study. These factors range from those associated with traditional risk assessment, such as health and environmental consequences, to broader features of risk such as those associated with reversibility, manageability, anticipated levels of public concern, and uncertainty. A multi-disciplinary panel with diverse perspectives and affiliations assessed four case studies of SB using the SRES. Rankings of the SRES components are compared within and across the case studies. From these comparisons, we found levels of controllability and familiarity associated with the cases to be important for overall SRES rankings. From a theoretical standpoint, this study illustrates the applicability of the psychometric paradigm to evaluating SB cases. In addition, our paper describes how the SRES can be incorporated into anticipatory governance models as a screening tool to prioritize research, information collection, and dialogue in the face of the limited capacity of governance systems. To our knowledge, this is the first study to elicit data on specific cases of SB with the goal of developing theory and tools for risk governance. PMID:28052080

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

NASA Technical Reports Server (NTRS)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

Risk management in a large-scale CO2 geosequestration pilot project, Illinois, USA

USGS Publications Warehouse

Hnottavange-Telleen, K.; Chabora, E.; Finley, R.J.; Greenberg, S.E.; Marsteller, S.

2011-01-01

Like most large-scale infrastructure projects, carbon dioxide (CO 2) geological sequestration (GS) projects have multiple success criteria and multiple stakeholders. In this context "risk evaluation" encompasses multiple scales. Yet a risk management program aims to maximize the chance of project success by assessing, monitoring, minimizing all risks in a consistent framework. The 150,000-km2 Illinois Basin underlies much of the state of Illinois, USA, and parts of adjacent Kentucky and Indiana. Its potential for CO2 storage is first-rate among basins in North America, an impression that has been strengthened by early testing of the injection well of the Midwest Geological Sequestration Consortium's (MGSC's) Phase III large scale demonstration project, the Illinois Basin - Decatur Project (IBDP). The IBDP, funded by the U.S. Department of Energy's National Energy Technology Laboratory (NETL), represents a key trial of GS technologies and project-management techniques. Though risks are specific to each site and project, IBDP risk management methodologies provide valuable experience for future GS projects. IBDP views risk as the potential for negative impact to any of these five values: health and safety, environment, financial, advancing the viability and public acceptability of a GS industry, and research. Research goals include monitoring one million metric tonnes of injected CO2 in the subsurface. Risk management responds to the ways in which any values are at risk: for example, monitoring is designed to reduce uncertainties in parameter values that are important for research and system control, and is also designed to provide public assurance. Identified risks are the primary basis for risk-reduction measures: risks linked to uncertainty in geologic parameters guide further characterization work and guide simulations applied to performance evaluation. Formally, industry defines risk (more precisely risk criticality) as the product L*S, the Likelihood multiplied by the Severity of negative impact. L and S are each evaluated on five-point scales, yielding a theoretical spread in risk values of 1 through 25. So defined, these judgment-based values are categorical and ordinal - they do not represent physically measurable quantities, but are nonetheless useful for comparison and therefore decision support. The "risk entities" first evaluated are FEPs - conceptual Features, Events, and Processes based on the list published by Quintessa Ltd. After concrete scenarios are generated based on selected FEPs, scenarios become the critical entities whose associated risks are evaluated and tracked. In IBDP workshops, L and S values for 123 FEPs were generated through expert elicitation. About 30 experts in the project or in GS in general were assigned among six facilitated working groups, and each group was charged to envision risks within a sphere of project operations. Working groups covered FEPs with strong spatial characteristics - such as those related to the injection wellbore and simulated plume footprint - and "nonspatial" FEPs related to finance, regulations, legal, and stakeholder issues. Within these working groups, experts shared information, examined assumptions, refined and extended the FEP list, calibrated responses, and provided initial L and S values by consensus. Individual rankings were collected in a follow-up process via emailed spreadsheets. For each of L and S, three values were collected: Lower Bound, Best Guess, and Upper Bound. The Lower-Upper Bound ranges and the spreads among experts can be interpreted to yield rough confidence measures. Based on experts' responses, FEPs were ranked in terms of their L*S risk levels. FEP rankings were determined from individual (not consensus or averaged) results, thus no high-risk responses were damped out. The higher-risk FEPs were used to generate one or more concrete, well defined risk-bearing scenarios for each FEP. Any FEP scored by any expert as having associated risk of

Active Matrix Organic Light Emitting Diode (AMOLED) Environmental Test Report

NASA Technical Reports Server (NTRS)

Salazar, George A.

2013-01-01

This report focuses on the limited environmental testing of the AMOLED display performed as an engineering evaluation by The NASA Johnson Space Center (JSC)-specifically. EMI. Thermal Vac, and radiation tests. The AMOLED display is an active-matrix Organic Light Emitting Diode (OLED) technology. The testing provided an initial understanding of the technology and its suitability for space applications. Relative to light emitting diode (LED) displays or liquid crystal displays (LCDs), AMOLED displays provide a superior viewing experience even though they are much lighter and smaller, produce higher contrast ratio and richer colors, and require less power to operate than LCDs. However, AMOLED technology has not been demonstrated in a space environment. Therefore, some risks with the technology must be addressed before they can be seriously considered for human spaceflight. The environmental tests provided preliminary performance data on the ability of the display technology to handle some of the simulated induced space/spacecraft environments that an AMOLED display will see during a spacecraft certification test program. This engineering evaluation is part of a Space Act Agreement (SM) between The NASA/JSC and Honeywell International (HI) as a collaborative effort to evaluate the potential use of AMOLED technology for future human spaceflight missions- both government-led and commercial. Under this SM, HI is responsible for doing optical performance evaluation, as well as temperature and touch screen studies. The NASA/JSC is responsible for performing environmental testing comprised of EMI, Thermal Vac, and radiation tests. Additionally, as part of the testing, limited optical data was acquired to assess performance as the display was subjected to the induced environments. The NASA will benefit from this engineering evaluation by understanding AMOLED suitability for future use in space as well as becoming a smarter buyer (or developer) of the technology. HI benefits from the environmental testing results by understanding its performance limitations/shortcomings to improve subsequent generations of AMOLED technology. Note that the AMOLED used in this test was not deSigned for the space environment but rather for commercial/industrial terrestrial applications.

ARV robotic technologies (ART): a risk reduction effort for future unmanned systems

NASA Astrophysics Data System (ADS)

Jaster, Jeffrey F.

2006-05-01

The Army's ARV (Armed Robotic Vehicle) Robotic Technologies (ART) program is working on the development of various technological thrusts for use in the robotic forces of the future. The ART program will develop, integrate and demonstrate the technology required to advance the maneuver technologies (i.e., perception, mobility, tactical behaviors) and increase the survivability of unmanned platforms for the future force while focusing on reducing the soldiers' burden by providing an increase in vehicle autonomy coinciding with a decrease in the total number user interventions required to control the unmanned assets. This program will advance the state of the art in perception technologies to provide the unmanned platform an increasingly accurate view of the terrain that surrounds it; while developing tactical/mission behavior technologies to provide the Unmanned Ground Vehicle (UGV) the capability to maneuver tactically, in conjunction with the manned systems in an autonomous mode. The ART testbed will be integrated with the advanced technology software and associated hardware developed under this effort, and incorporate appropriate mission modules (e.g. RSTA sensors, MILES, etc.) to support Warfighter experiments and evaluations (virtual and field) in a military significant environment (open/rolling and complex/urban terrain). The outcome of these experiments as well as other lessons learned through out the program life cycle will be used to reduce the current risks that are identified for the future UGV systems that will be developed under the Future Combat Systems (FCS) program, including the early integration of an FCS-like autonomous navigation system onto a tracked skid steer platform.

Electric Power System Technology Options for Lunar Surface Missions

NASA Technical Reports Server (NTRS)

Kerslake, Thomas W.

2005-01-01

In 2004, the President announced a 'Vision for Space Exploration' that is bold and forward-thinking, yet practical and responsible. The vision explores answers to longstanding questions of importance to science and society and will develop revolutionary technologies and capabilities for the future, while maintaining good stewardship of taxpayer dollars. One crucial technology area enabling all space exploration is electric power systems. In this paper, the author evaluates surface power technology options in order to identify leading candidate technologies that will accomplish lunar design reference mission three (LDRM-3). LDRM-3 mission consists of multiple, 90-day missions to the lunar South Pole with 4-person crews starting in the year 2020. Top-level power requirements included a nominal 50 kW continuous habitat power over a 5-year lifetime with back-up or redundant emergency power provisions and a nominal 2-kW, 2-person unpressurized rover. To help direct NASA's technology investment strategy, this lunar surface power technology evaluation assessed many figures of merit including: current technology readiness levels (TRLs), potential to advance to TRL 6 by 2014, effectiveness of the technology to meet the mission requirements in the specified time, mass, stowed volume, deployed area, complexity, required special ground facilities, safety, reliability/redundancy, strength of industrial base, applicability to other LDRM-3 elements, extensibility to Mars missions, costs, and risks. For the 50-kW habitat module, dozens of nuclear, radioisotope and solar power technologies were down-selected to a nuclear fission heat source with Brayton, Stirling or thermoelectric power conversion options. Preferred energy storage technologies included lithium-ion battery and Proton Exchange Membrane (PEM) Regenerative Fuel Cells (RFC). Several AC and DC power management and distribution architectures and component technologies were defined consistent with the preferred habitat power generation technology option and the overall lunar surface mission. For rover power, more than 20 technology options were down-selected to radioisotope Stirling, liquid lithium-ion battery, PEM RFC, or primary fuel cell options. The author discusses various conclusions that can be drawn from the findings of this surface power technologies evaluation.

Association of birth defects with the mode of assisted reproductive technology in a Chinese data-linkage cohort.

PubMed

Yu, Hui-Ting; Yang, Qing; Sun, Xiao-Xi; Chen, Guo-Wu; Qian, Nai-Si; Cai, Ren-Zhi; Guo, Han-Bing; Wang, Chun-Fang

2018-05-01

To evaluate the impact of assisted reproductive technology (ART) on the offspring of Chinese population. Retrospective, data-linkage cohort. Not applicable. Live births resulting from ART or natural conception. None. Birth defects coded according to ICD-10. Births after ART were more likely to be female and multiple births, especially after intracytoplasmic sperm injection (ICSI). ART was associated with a significantly increased risk of birth defects, especially, among singleton births, a significantly increased risk in fresh-embryo cycles after in vitro fertilization (IVF) and frozen-embryo cycles after ICSI. Associations between ART and multiple defects, between ART and gastrointestinal malformation, genital organs malformation, and musculoskeletal malformation among singleton births, and between ART and cardiac septa malformation among multiple births were observed. This study suggests that ART increases the risk of birth defects. Subgroup analyses indicate higher risk for both fresh and frozen embryos, although nonsignificantly for frozen embryos after IVF and for fresh embryos were presented with low power. Larger sample size research is needed to clarify effects from fresh- or frozen-embryo cycles after IVF and ICSI. Copyright © 2018 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Reducing risks to children in vehicles with passenger airbags.

PubMed

Graham, J D; Goldie, S J; Segui-Gomez, M; Thompson, K M; Nelson, T; Glass, R; Simpson, A; Woerner, L G

1998-07-01

This review examines the risk that passenger airbags pose for children and discusses behavioral and technologic measures aimed at protecting children from airbag deployment. Although airbags reduce fatal crash injuries among adult drivers and passengers, this safety technology increases mortality risk among children younger than age 12. The magnitude of the risk is multiplied when children are unrestrained or restrained improperly. As new vehicles are resold to buyers who tend to be less safety-conscious than new car owners, the number of children endangered by passenger airbag deployment may increase. For vehicles already in the fleet, strong measures are required to secure children in the rear seat and increase the proper use of appropriate restraint systems through police enforcement of laws. One promising strategy is to amend child passenger safety laws to require that parents secure children in the rear seats. For future vehicles, a mandatory performance standard should be adopted that suppresses airbag deployment automatically if a child is located in the front passenger seat. Other promising improvements in airbag design also are discussed. Major changes in passenger airbag design must be evaluated in a broad analytical framework that considers the welfare of adults as well as children.

Landscape ecological risk assessment study in arid land

NASA Astrophysics Data System (ADS)

Gong, Lu; Amut, Aniwaer; Shi, Qingdong; Wang, Gary Z.

2007-09-01

The ecosystem risk assessment is an essential decision making system for predicting the reconstruction and recovery of a damaged ecosystem after intensive mankind activities. The sustainability of environment and resources of the lake ecosystem in arid districts have been paid close attention to by international communities as well as numerous experts and scholars. The ecological risk assessment offered a scientific foundation for making the decision and execution of ecological risk management. Bosten Lake, the largest inland freshwater lake in China, is the main water source of the industrial and agricultural production as well as the local residence in Yanqi basin, Kuara city and Yuri County in the southern Xinjiang. Bosten Lake also provides a direct water source for emergency transportation in the Lower Reaches of Tarim River. However, with the intensive utilizations of water and soil resources, the environmental condition in the Bosten Lake has become more and more serious. In this study, the theory and method of landscape ecological risk assessment has been practiced using 3S technologies combined with the frontier theory of landscape ecology. Defining the mainly risk resource including flood, drought, water pollution and rich nutrition of water has been evaluated based on the ecosystem risk assessment system. The main process includes five stages: regional natural resources analysis, risk receptor selection, risk sources evaluation, exposure and hazard analysis, and integrated risk assessment. Based on the risk assessment results, the environmental risk management countermeasure has been determined.

Diagnosis and Management of High Risk Group for Gastric Cancer

PubMed Central

Yoon, Hyuk; Kim, Nayoung

2015-01-01

Gastric cancer is associated with high morbidity and mortality worldwide. To reduce the socioeconomic burden related to gastric cancer, it is very important to identify and manage high risk group for gastric cancer. In this review, we describe the general risk factors for gastric cancer and define high risk group for gastric cancer. We discuss strategies for the effective management of patients for the prevention and early detection of gastric cancer. Atrophic gastritis (AG) and intestinal metaplasia (IM) are the most significant risk factors for gastric cancer. Therefore, the accurate selection of individuals with AG and IM may be a key strategy for the prevention and/or early detection of gastric cancer. Although endoscopic evaluation using enhanced technologies such as narrow band imaging-magnification, the serum pepsinogen test, Helicobacter pylori serology, and trefoil factor 3 have been evaluated, a gold standard method to accurately select individuals with AG and IM has not emerged. In terms of managing patients at high risk of gastric cancer, it remains uncertain whether H. pylori eradication reverses and/or prevents the progression of AG and IM. Although endoscopic surveillance in high risk patients is expected to be beneficial, further prospective studies in large populations are needed to determine the optimal surveillance interval. PMID:25547086

Evaluating the Impact of Information Technology Tools to Support the Asthma Medical Home.

PubMed

Matiz, L Adriana; Robbins-Milne, Laura; Krause, M Christine; Peretz, Patricia J; Rausch, John C

2016-02-01

This study aimed to evaluate the impact of information technology tools on the outcomes of children with asthma in the medical home. A registry was established for children aged 4 to 18 years with an ICD-9 code for asthma. Changes to the electronic health record included modifications to notes, care plans, and orders. A retrospective analysis of emergency department and in-patient utilization for a cohort of patients was conducted from July 2009 through June 2013. Of the study population (n = 1217), 65% had a classification of asthma severity and 63% were risk-stratified. Seventy percent had a control assessment at least once. Care plan use increased from 5% to 22% and enrollment in care coordination increased from 0.1% to 4%. After 3 years, there was a reduction of emergency department and inpatient admissions for asthma (P < .05 and P < .005, respectively). The implementation of information technology tools was associated with improved asthma outcomes. © The Author(s) 2015.

Global cost and weight evaluation of fuselage keel design concepts

NASA Technical Reports Server (NTRS)

Flynn, B. W.; Morris, M. R.; Metschan, S. L.; Swanson, G. D.; Smith, P. J.; Griess, K. H.; Schramm, M. R.; Humphrey, R. J.

1993-01-01

The Boeing program entitled Advanced Technology Composite Aircraft Structure (ATCAS) is focused on the application of affordable composite technology to pressurized fuselage structure of future aircraft. As part of this effort, a design study was conducted on the keel section of the aft fuselage. A design build team (DBT) approach was used to identify and evaluate several design concepts which incorporated different material systems, fabrication processes, structural configurations, and subassembly details. The design concepts were developed in sufficient detail to accurately assess their potential for cost and weight savings as compared with a metal baseline representing current wide body technology. The cost and weight results, along with an appraisal of performance and producibility risks, are used to identify a globally optimized keel design; one which offers the most promising cost and weight advantages over metal construction. Lastly, an assessment is given of the potential for further cost and weight reductions of the selected keel design during local optimization.

Analysis of fuel cycle strategies and U.S. transition scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wigeland, Roald; Taiwo, Temitope A.

2016-10-17

The nuclear fuel cycle Evaluation and Screening (E&S) study that was completed in October 2014 [1] enabled the identification of four fuel cycle groups that are considered most promising based on a set of nine evaluation criteria: (a) six benefit criteria of Nuclear Waste Management, Proliferation Risk, Nuclear Material Security Risk, Safety, Environmental Impact, Resource Utilization, and (b) three challenge criteria of Development and Deployment Risk, Institutional Issues, Financial Risk and Economics. The E&S study was conducted at a level of analysis that is "technology- neutral," that is, without consideration of specific technologies, but using the fundamental physics characteristics ofmore » each part of the fuel cycle. The study focused on the fuel cycle performance benefits at the fuel cycle equilibrium state, with only limited consideration of transition and deployment impacts. Common characteristics of the four most promising fuel cycle options include continuous recycle of all U/Pu or U/TRU, the use of fast-spectrum reactors, and no use of uranium enrichment once fuel cycle equilibrium has been established. The high-level wastes are mainly from processing of irradiated fuel, and there would be no disposal of any spent fuel. Building on the findings of the E&S study, additional studies have been conducted in the last two years following the information exchange meeting, the 13th IEMPT, which was held in Seoul, the Republic of Korea in 2014. Insights are presented from the recent studies on the benefits and challenges of recycling minor actinides, and transition considerations to some of the most promising fuel cycle options.« less

Business intelligence modeling in launch operations

NASA Astrophysics Data System (ADS)

Bardina, Jorge E.; Thirumalainambi, Rajkumar; Davis, Rodney D.

2005-05-01

The future of business intelligence in space exploration will focus on the intelligent system-of-systems real-time enterprise. In present business intelligence, a number of technologies that are most relevant to space exploration are experiencing the greatest change. Emerging patterns of set of processes rather than organizational units leading to end-to-end automation is becoming a major objective of enterprise information technology. The cost element is a leading factor of future exploration systems. This technology project is to advance an integrated Planning and Management Simulation Model for evaluation of risks, costs, and reliability of launch systems from Earth to Orbit for Space Exploration. The approach builds on research done in the NASA ARC/KSC developed Virtual Test Bed (VTB) to integrate architectural, operations process, and mission simulations for the purpose of evaluating enterprise level strategies to reduce cost, improve systems operability, and reduce mission risks. The objectives are to understand the interdependency of architecture and process on recurring launch cost of operations, provide management a tool for assessing systems safety and dependability versus cost, and leverage lessons learned and empirical models from Shuttle and International Space Station to validate models applied to Exploration. The systems-of-systems concept is built to balance the conflicting objectives of safety, reliability, and process strategy in order to achieve long term sustainability. A planning and analysis test bed is needed for evaluation of enterprise level options and strategies for transit and launch systems as well as surface and orbital systems. This environment can also support agency simulation based acquisition process objectives. The technology development approach is based on the collaborative effort set forth in the VTB's integrating operations, process models, systems and environment models, and cost models as a comprehensive disciplined enterprise analysis environment. Significant emphasis is being placed on adapting root cause from existing Shuttle operations to exploration. Technical challenges include cost model validation, integration of parametric models with discrete event process and systems simulations, and large-scale simulation integration. The enterprise architecture is required for coherent integration of systems models. It will also require a plan for evolution over the life of the program. The proposed technology will produce long-term benefits in support of the NASA objectives for simulation based acquisition, will improve the ability to assess architectural options verses safety/risk for future exploration systems, and will facilitate incorporation of operability as a systems design consideration, reducing overall life cycle cost for future systems.

Business Intelligence Modeling in Launch Operations

NASA Technical Reports Server (NTRS)

Bardina, Jorge E.; Thirumalainambi, Rajkumar; Davis, Rodney D.

2005-01-01

This technology project is to advance an integrated Planning and Management Simulation Model for evaluation of risks, costs, and reliability of launch systems from Earth to Orbit for Space Exploration. The approach builds on research done in the NASA ARC/KSC developed Virtual Test Bed (VTB) to integrate architectural, operations process, and mission simulations for the purpose of evaluating enterprise level strategies to reduce cost, improve systems operability, and reduce mission risks. The objectives are to understand the interdependency of architecture and process on recurring launch cost of operations, provide management a tool for assessing systems safety and dependability versus cost, and leverage lessons learned and empirical models from Shuttle and International Space Station to validate models applied to Exploration. The systems-of-systems concept is built to balance the conflicting objectives of safety, reliability, and process strategy in order to achieve long term sustainability. A planning and analysis test bed is needed for evaluation of enterprise level options and strategies for transit and launch systems as well as surface and orbital systems. This environment can also support agency simulation .based acquisition process objectives. The technology development approach is based on the collaborative effort set forth in the VTB's integrating operations. process models, systems and environment models, and cost models as a comprehensive disciplined enterprise analysis environment. Significant emphasis is being placed on adapting root cause from existing Shuttle operations to exploration. Technical challenges include cost model validation, integration of parametric models with discrete event process and systems simulations. and large-scale simulation integration. The enterprise architecture is required for coherent integration of systems models. It will also require a plan for evolution over the life of the program. The proposed technology will produce long-term benefits in support of the NASA objectives for simulation based acquisition, will improve the ability to assess architectural options verses safety/risk for future exploration systems, and will facilitate incorporation of operability as a systems design consideration, reducing overall life cycle cost for future systems. The future of business intelligence of space exploration will focus on the intelligent system-of-systems real-time enterprise. In present business intelligence, a number of technologies that are most relevant to space exploration are experiencing the greatest change. Emerging patterns of set of processes rather than organizational units leading to end-to-end automation is becoming a major objective of enterprise information technology. The cost element is a leading factor of future exploration systems.

Evaluation and refinement of a handheld health information technology tool to support the timely update of bedside visual cues to prevent falls in hospitals.

PubMed

Teh, Ruth C-A; Visvanathan, Renuka; Ranasinghe, Damith; Wilson, Anne

2018-06-01

To evaluate clinicians' perspectives, before and after clinical implementation (i.e. trial) of a handheld health information technology (HIT) tool, incorporating an iPad device and automatically generated visual cues for bedside display, for falls risk assessment and prevention in hospital. This pilot study utilized mixed-methods research with focus group discussions and Likert-scale surveys to elicit clinicians' attitudes. The study was conducted across three phases within two medical wards of the Queen Elizabeth Hospital. Phase 1 (pretrial) involved focus group discussion (five staff) and surveys (48 staff) to elicit preliminary perspectives on tool use, benefits and barriers to use and recommendations for improvement. Phase 2 (tool trial) involved HIT tool implementation on two hospital wards over consecutive 12-week periods. Phase 3 (post-trial) involved focus group discussion (five staff) and surveys (29 staff) following tool implementation, with similar themes as in Phase 1. Qualitative data were evaluated using content analysis, and quantitative data using descriptive statistics and logistic regression analysis, with subgroup analyses on user status (P ≤ 0.05). Four findings emerged on clinicians' experience, positive perceptions, negative perceptions and recommendations for improvement of the tool. Pretrial, clinicians were familiar with using visual cues in hospital falls prevention. They identified potential benefits of the HIT tool in obtaining timely, useful falls risk assessment to improve patient care. During the trial, the wards differed in methods of tool implementation, resulting in lower uptake by clinicians on the subacute ward. Post-trial, clinicians remained supportive for incorporating the tool into clinical practice; however, there were issues with usability and lack of time for tool use. Staff who had not used the tool had less appreciation for it improving their understanding of patients' falls risk factors (odds ratio 0.12), or effectively preventing hospital falls (odds ratio 0.12). Clinicians' recommendations resulted in subsequent technological refinement of the tool, and provision of an additional iPad device for more efficient use. This study adds to the limited pool of knowledge about clinicians' attitudes toward health technology use in falls avoidance. Clinicians were willing to use the HIT tool, and their concerns about its usability were addressed in ongoing tool improvement. Including end-users in the development and refinement processes, as well as having high staff uptake of new technologies, is important in improving their acceptance and usage, and in maximizing beneficial feedback to further inform tool development.

The HTA Risk Analysis Chart: Visualising the Need for and Potential Value of Managed Entry Agreements in Health Technology Assessment.

PubMed

Grimm, Sabine Elisabeth; Strong, Mark; Brennan, Alan; Wailoo, Allan J

2017-12-01

Recent changes to the regulatory landscape of pharmaceuticals may sometimes require reimbursement authorities to issue guidance on technologies that have a less mature evidence base. Decision makers need to be aware of risks associated with such health technology assessment (HTA) decisions and the potential to manage this risk through managed entry agreements (MEAs). This work develops methods for quantifying risk associated with specific MEAs and for clearly communicating this to decision makers. We develop the 'HTA risk analysis chart', in which we present the payer strategy and uncertainty burden (P-SUB) as a measure of overall risk. The P-SUB consists of the payer uncertainty burden (PUB), the risk stemming from decision uncertainty as to which is the truly optimal technology from the relevant set of technologies, and the payer strategy burden (PSB), the additional risk of approving a technology that is not expected to be optimal. We demonstrate the approach using three recent technology appraisals from the UK National Institute for Health and Clinical Excellence (NICE), each of which considered a price-based MEA. The HTA risk analysis chart was calculated using results from standard probabilistic sensitivity analyses. In all three HTAs, the new interventions were associated with substantial risk as measured by the P-SUB. For one of these technologies, the P-SUB was reduced to zero with the proposed price reduction, making this intervention cost effective with near complete certainty. For the other two, the risk reduced substantially with a much reduced PSB and a slightly increased PUB. The HTA risk analysis chart shows the risk that the healthcare payer incurs under unresolved decision uncertainty and when considering recommending a technology that is not expected to be optimal given current evidence. This allows the simultaneous consideration of financial and data-collection MEA schemes in an easily understood format. The use of HTA risk analysis charts will help to ensure that MEAs are considered within a standard utility-maximising health economic decision-making framework.

The NASA Electronic Parts and Packaging (NEPP) Program: Results and Direction

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.

2007-01-01

The NASA Electronic Parts and Packaging (NEPP) Program's mission is to provide guidance to NASA for the selection and application of microelectronic technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission assurance needs. This viewgraph presentation reviews the NEPP program's goals and objectives, and reviews many of the missions that the NEPP program has impacted, both in and out of NASA. Also included are examples of the evaluation that the program performed.

Applying the food technology neophobia scale in a developing country context. A case-study on processed matooke (cooking banana) flour in Central Uganda.

PubMed

De Steur, Hans; Odongo, Walter; Gellynck, Xavier

2016-01-01

The success of new food technologies largely depends on consumers' behavioral responses to the innovation. In Eastern Africa, and Uganda in particular, a technology to process matooke into flour has been introduced with limited success. We measure and apply the Food technology Neophobia Scale (FTNS) to this specific case. This technique has been increasingly used in consumer research to determine consumers' fear for foods produced by novel technologies. Although it has been successful in developed countries, the low number and limited scope of past studies underlines the need for testing its applicability in a developing country context. Data was collected from 209 matooke consumers from Central Uganda. In general, respondents are relatively neophobic towards the new technology, with an average FTNS score of 58.7%, which hampers the success of processed matooke flour. Besides socio-demographic indicators, 'risk perception', 'healthiness' and the 'necessity of technologies' were key factors that influenced consumer's preference of processed matooke flour. Benchmarking the findings against previous FTNS surveys allows to evaluate factor solutions, compare standardized FTNS scores and further lends support for the multidimensionality of the FTNS. Being the first application in a developing country context, this study provides a case for examining food technology neophobia for processed staple crops in various regions and cultures. Nevertheless, research is needed to replicate this method and evaluate the external validity of our findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Validation of Safety-Critical Systems for Aircraft Loss-of-Control Prevention and Recovery

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.

2012-01-01

Validation of technologies developed for loss of control (LOC) prevention and recovery poses significant challenges. Aircraft LOC can result from a wide spectrum of hazards, often occurring in combination, which cannot be fully replicated during evaluation. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of hazardous and uncertain conditions, and the validation framework must provide some measure of assurance that the new vehicle safety technologies do no harm (i.e., that they themselves do not introduce new safety risks). This paper summarizes a proposed validation framework for safety-critical systems, provides an overview of validation methods and tools developed by NASA to date within the Vehicle Systems Safety Project, and develops a preliminary set of test scenarios for the validation of technologies for LOC prevention and recovery

The personalized reminder information and social management system (PRISM) trial: rationale, methods and baseline characteristics.

PubMed

Czaja, Sara J; Boot, Walter R; Charness, Neil; A Rogers, Wendy; Sharit, Joseph; Fisk, Arthur D; Lee, Chin Chin; Nair, Sankaran N

2015-01-01

Technology holds promise in terms of providing support to older adults. To date, there have been limited robust systematic efforts to evaluate the psychosocial benefits of technology for older people and identify factors that influence both the usability and uptake of technology systems. In response to these issues, we developed the Personal Reminder Information and Social Management System (PRISM), a software application designed for older adults to support social connectivity, memory, knowledge about topics, leisure activities and access to resources. This trail is evaluating the impact of access to the PRISM system on outcomes such as social isolation, social support and connectivity. This paper reports on the approach used to design the PRISM system, study design, methodology and baseline data for the trial. The trial is multi-site randomized field trial. PRISM is being compared to a Binder condition where participants received a binder that contained content similar to that found on PRISM. The sample includes 300 older adults, aged 65-98 years, who lived alone and at risk for being isolated. The primary outcome measures for the trial include indices of social isolation and support and well-being. Secondary outcomes measures include indices of computer proficiency, technology uptake and attitudes towards technology. Follow-up assessments occurred at 6 and 12 months post-randomization. The results of this study will yield important information about the potential value of technology for older adults. The study also demonstrates how a user-centered iterative design approach can be incorporated into the design and evaluation of an intervention protocol. Copyright © 2014 Elsevier Inc. All rights reserved.

The Personalized Reminder Information and Social Management System (PRISM) Trial: Rationale, Methods and Baseline Characteristics

PubMed Central

Czaja, Sara J.; Boot, Walter R.; Charness, Neil; Rogers, Wendy; Sharit, Joseph; Fisk, Arthur D.; Lee, Chin Chin; Nair, Sankaran N.

2014-01-01

Technology holds promise in terms of providing support to older adults. To date there have been limited robust systematic efforts to evaluate the psychosocial benefits of technology for older people and identify factors that influence both the usability and uptake of technology systems. In response to these issues we developed the Personal Reminder Information and Social Management System (PRISM), a software application designed for older adults to support social connectivity, memory, knowledge about topics, leisure activities and access to resources. This trail is evaluating the impact of access to the PRISM system on outcomes such as social isolation, social support and connectivity. This paper reports on the approach used to design the PRISM system, study design, methodology and baseline data for the trial. The trial is multi-site randomized field trial. PRISM is being compared to a Binder condition where participants received a binder that contained content similar to that found on PRISM. The sample includes 300 older adults, aged 65 – 98 years, who lived alone and at risk for being isolated. The primary outcome measures for the trial include indices of social isolation and support and well-being. Secondary outcomes measures include indices of computer proficiency, technology uptake and attitudes towards technology. Follow-up assessments occurred at 6 and 12 months post-randomization. The results of this study will yield important information about the potential value of technology for older adults. The study also demonstrates how a user-centered iterative design approach can be incorporated into the design and evaluation of an intervention protocol. PMID:25460342

Risk Assessment for Stonecutting Enterprises

NASA Astrophysics Data System (ADS)

Aleksandrova, A. J.; Timofeeva, S. S.

2017-04-01

Working conditions at enterprises and artisanal workshops for the processing of jewelry and ornamental stones were considered. The main stages of the technological process for processing of stone raw materials were shown; dangerous processes in the extraction of stone and its processing were identified. The characteristic of harmful and dangerous production factors affecting stonecutters is given. It was revealed that the most dangerous are the increased level of noise and vibration, as well as chemical reagents. The results of a special assessment of the working conditions of stone-cutting plant workers are studied. Professions with high professional risk were identified; an analysis of occupational risks and occupational injuries was carried out. Risk assessment was produced by several methods; professions with high and medium risk indicators were identified by results of the evaluation. The application of risk assessment methods was given the possibility to justify rational measures reducing risks to the lowest possible level. The received quantitative indicators of risk of workers of the stone-cutting enterprises are the result of this work.

The impact of intensity on perceived risk from unconventional shale gas development.

PubMed

Livy, Mitchell R; Gopalakrishnan, Sathya; Klaiber, H Allen; Roe, Brian E

2018-07-15

The recent boom in the extraction of natural gas from subsurface shale deposits due to advances in hydraulic fracturing and horizontal drilling technologies has raised concern around environmental risks. Reliable measures of how residents view these risks are therefore a necessary first step in evaluating policies that regulate the industry through risk mitigation measures. We conduct a choice experiment targeting residents in an area of Ohio with significant shale drilling activity, and find that households are willing to pay to avoid high intensities of shale development and truck traffic. Our analysis presents new policy-relevant evidence of preferences associated with unconventional shale gas reserves, and highlights the tradeoffs between activity intensity at each site and the number of sites in aggregate. Copyright © 2018 Elsevier Ltd. All rights reserved.

Model and Analytic Processes for Export License Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.

2011-09-29

This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determinemore » which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An approach to developing testable hypotheses for the macro-level assessment methodologies is provided. The outcome of this works suggests that we should develop a Bayes Net for micro-level analysis and continue to focus on Bayes Net, System Dynamics and Economic Input/Output models for assessing macro-level problems. Simultaneously, we need to develop metrics for assessing intent in export control, including the risks and consequences associated with all aspects of export control.« less

Effective technologies for noninvasive remote monitoring in heart failure.

PubMed

Conway, Aaron; Inglis, Sally C; Clark, Robyn A

2014-06-01

Trials of new technologies to remotely monitor for signs and symptoms of worsening heart failure are continually emerging. The extent to which technological differences impact the effectiveness of noninvasive remote monitoring for heart failure management is unknown. This study examined the effect of specific technology used for noninvasive remote monitoring of people with heart failure on all-cause mortality and heart failure-related hospitalizations. A subanalysis of a large systematic review and meta-analysis was conducted. Studies were stratified according to the specific type of technology used, and separate meta-analyses were performed. Four different types of noninvasive remote monitoring technologies were identified, including structured telephone calls, videophone, interactive voice response devices, and telemonitoring. Only structured telephone calls and telemonitoring were effective in reducing the risk of all-cause mortality (relative risk [RR]=0.87; 95% confidence interval [CI], 0.75-1.01; p=0.06; and RR=0.62; 95% CI, 0.50-0.77; p<0.0001, respectively) and heart failure-related hospitalizations (RR=0.77; 95% CI, 0.68-0.87; p<0.001; and RR=0.75; 95% CI, 0.63-0.91; p=0.003, respectively). More research data are required for videophone and interactive voice response technologies. This subanalysis identified that only two of the four specific technologies used for noninvasive remote monitoring in heart failure improved outcomes. When results of studies that involved these disparate technologies were combined in previous meta-analyses, significant improvements in outcomes were identified. As such, this study has highlighted implications for future meta-analyses of randomized controlled trials focused on evaluating the effectiveness of remote monitoring in heart failure.

Boar sperm encapsulation reduces in vitro polyspermy.

PubMed

Faustini, M; Bucco, M; Galeati, G; Spinaci, M; Villani, S; Chlapanidas, T; Ghidoni, I; Vigo, D; Torre, M L

2010-04-01

A boar sperm encapsulation technology in barium alginate has been developed to enhance reproductive performances and spermatozoa preservation time; aim of this work was to evaluate the effect of in vitro sperm encapsulation on polyspermy as a function of storage time at 18 degrees C. A total number of 40 in vitro fertilization (IVF) tests were performed using encapsulated or diluted spermatozoa (20 IVF each treatment). Overall, 1288 in vitro matured oocytes were fertilized with spermatozoa stored at 24, 48 or 72 h at 18 degrees C for both treatments polyspermy and normospermy, and the non-penetration rates were assessed by optical microscopy. Results indicate a significant reduction in risk of polyspermic oocytes when spermatozoa are preserved in barium alginate membranes (incidence risk ratio: 0.766 with respect to diluted); such enhancement could be explained by lesser damage of sperm membranes achieved by encapsulation technology.

Intravenous medication safety and smart infusion systems: lessons learned and future opportunities.

PubMed

Keohane, Carol A; Hayes, Judy; Saniuk, Catherine; Rothschild, Jeffrey M; Bates, David W

2005-01-01

The Institute of Medicine report To Err Is Human: Building a Safe Health System greatly increased national awareness of the need to improve patient safety in general and medication safety in particular. Infusion-related errors are associated with the greatest risk of harm, and "smart" (computerized) infusion systems are currently available that can avert high-risk errors and provide previously unavailable data for continuous quality improvement (CQI) efforts. As healthcare organizations consider how to invest scarce dollars, infusion nurses have a key role to play in assessing need, evaluating technology, and selecting and implementing specific products. This article reviews the need to improve intravenous medication safety. It describes smart infusion systems and the results they have achieved. Finally, it details the lessons learned and the opportunities identified through the use of smart infusion technology at Brigham and Women's Hospital in Boston, Massachusetts.

A queueing theory based model for business continuity in hospitals.

PubMed

Miniati, R; Cecconi, G; Dori, F; Frosini, F; Iadanza, E; Biffi Gentili, G; Niccolini, F; Gusinu, R

2013-01-01

Clinical activities can be seen as results of precise and defined events' succession where every single phase is characterized by a waiting time which includes working duration and possible delay. Technology makes part of this process. For a proper business continuity management, planning the minimum number of devices according to the working load only is not enough. A risk analysis on the whole process should be carried out in order to define which interventions and extra purchase have to be made. Markov models and reliability engineering approaches can be used for evaluating the possible interventions and to protect the whole system from technology failures. The following paper reports a case study on the application of the proposed integrated model, including risk analysis approach and queuing theory model, for defining the proper number of device which are essential to guarantee medical activity and comply the business continuity management requirements in hospitals.

Process change evaluation framework for allogeneic cell therapies: impact on drug development and commercialization.

PubMed

Hassan, Sally; Huang, Hsini; Warren, Kim; Mahdavi, Behzad; Smith, David; Jong, Simcha; Farid, Suzanne S

2016-04-01

Some allogeneic cell therapies requiring a high dose of cells for large indication groups demand a change in cell expansion technology, from planar units to microcarriers in single-use bioreactors for the market phase. The aim was to model the optimal timing for making this change. A development lifecycle cash flow framework was created to examine the implications of process changes to microcarrier cultures at different stages of a cell therapy's lifecycle. The analysis performed under assumptions used in the framework predicted that making this switch earlier in development is optimal from a total expected out-of-pocket cost perspective. From a risk-adjusted net present value view, switching at Phase I is economically competitive but a post-approval switch can offer the highest risk-adjusted net present value as the cost of switching is offset by initial market penetration with planar technologies. The framework can facilitate early decision-making during process development.

Pacific Northwest Laboratory annual report for 1985 to the DOE Office of Energy Research. Part 1. Biomedical sciences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.F.

1986-02-01

This report summarizes progress on OHER biomedical and health-effects research conducted at PNL in FY 1985 to develop information for a comprehensive understanding of the interaction of energy-related radiation and chemicals with man. Our continuing emphasis on decreasing the uncertainty of health-effects risk estimates to man from existing and/or developing energy-related technologies supports the DOE goal of increasing and diversifying national energy resources and decreasing risks to human health. The report is arranged to reflect the PNL research relative to OHER programmatic needs. The first section concerns evaluation of possible health effects among nuclear workers. The next two sections, whichmore » contain reports of health-effects research in biological systems, include health effects of radiation and health effects of chemical mixtures. The last section is related to medical applications of nuclear technology.« less

Technology-Induced Risks in History

NASA Astrophysics Data System (ADS)

Rabkin, Ya.

Our perception of risk contains three main aspects: (1) probability of the risk occurring; (2) the extent of possible damage; (3) the degree of voluntary or involuntary exposure to risk. History of risk assessment has been traced in several areas, such as transportation, and has largely focused on insurance. Construction projects constitute one of the oldest areas of technology where accidents continue to occur, while health has always been a fragile commodity. Urbanization has multiplied the risks of illness and death, while natural catastrophes, though still frightening, have ceded their central place to technology-based disasters in the Western perceptions of risk. The human has become the main source of danger to the very survival of the planet. The Enlightenment utopia of scientific progress resulting in social and moral progress of humanity has collided with the awareness of new technology induced risks. Life on Earth began without humans, and it may end without them. Our civilization is the first that faces an end to be brought about by our own technological ingenuity.

Subsonic Ultra Green Aircraft Research

NASA Technical Reports Server (NTRS)

Bradley, Marty K.; Droney, Christopher K.

2011-01-01

This Final Report summarizes the work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team in Phase 1, which includes the time period of October 2008 through March 2010. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, and Georgia Tech. The team completed the development of a comprehensive future scenario for world-wide commercial aviation, selected baseline and advanced configurations for detailed study, generated technology suites for each configuration, conducted detailed performance analysis, calculated noise and emissions, assessed technology risks, and developed technology roadmaps. Five concepts were evaluated in detail: 2008 baseline, N+3 reference, N+3 high span strut braced wing, N+3 gas turbine battery electric concept, and N+3 hybrid wing body. A wide portfolio of technologies was identified to address the NASA N+3 goals. Significant improvements in air traffic management, aerodynamics, materials and structures, aircraft systems, propulsion, and acoustics are needed. Recommendations for Phase 2 concept and technology projects have been identified.

Advanced Technology Spark-Ignition Aircraft Piston Engine Design Study

NASA Technical Reports Server (NTRS)

Stuckas, K. J.

1980-01-01

The advanced technology, spark ignition, aircraft piston engine design study was conducted to determine the improvements that could be made by taking advantage of technology that could reasonably be expected to be made available for an engine intended for production by January 1, 1990. Two engines were proposed to account for levels of technology considered to be moderate risk and high risk. The moderate risk technology engine is a homogeneous charge engine operating on avgas and offers a 40% improvement in transportation efficiency over present designs. The high risk technology engine, with a stratified charge combustion system using kerosene-based jet fuel, projects a 65% improvement in transportation efficiency. Technology enablement program plans are proposed herein to set a timetable for the successful integration of each item of required advanced technology into the engine design.

A methodology of the assessment of environmental and human health risks from amine emissions from post combustion CO2 capture technology

NASA Astrophysics Data System (ADS)

Korre, Anna; Manzoor, Saba; Simperler, Alexandra

2015-04-01

Post combustion CO2 capture (PCCC) technology in power plants using amines as solvent for CO2 capture, is one of the reduction technologies employed to combat escalating levels of CO2 in the atmosphere. However, amine solvents used for capturing CO2 produce negative emissions such as, nitrosamines and nitramines, which are suspected to be potent carcinogens. It is therefore essential to assess the atmospheric fate of these amine emissions in the atmosphere by studying their atmospheric chemistry, dispersion and transport pathways away from the source and deposition in the environment, so as to be able to assess accurately the risk posed to human health and the natural environment. An important knowledge gap until recently has been the consideration of the atmospheric chemistry of these amine emissions simultaneously with dispersion and deposition studies so as to perform reliable human health and environmental risk assessments. The authors have developed a methodology to assess the distribution of such emissions away from a post-combustion facility by studying the atmospheric chemistry of monoethanolamine, the most commonly used solvent for CO2 capture, and those of the resulting degradation amines, methylamine and dimethylamine. This was coupled with dispersion modeling calculations (Manzoor, et al., 2014; Manzoor et al,2015). Rate coefficients describing the entire atmospheric chemistry schemes of the amines studied were evaluated employing quantum chemical theoretical and kinetic modeling calculations. These coefficients were used to solve the advection-dispersion-chemical equation using an atmospheric dispersion model, ADMS 5. This methodology is applicable to any size of a power plant and at any geographical location. In this paper, the humman health risk assessment is integrated in the modelling study. The methodology is demonstrated on a case study on the UK's largest capture pilot plant, Ferrybridge CCPilot 100+, to estimate the dispersion, chemical transformation and transport pathways of the amines and their degradation products away from the emitting facilities for the worst case scenario. The obtained results are used in calculating the cancer risks centred on oral cancer slope factor (CSF), risk-specific dose (RSD) and tolerant risk level of these chemical discharges. According to the CSF and RSD relationship (WQSA, 2011), at high CSF the RSD is small i.e. resulting in a high potent carcinogen risk. The health risk assessment is performed by following the US EPA method (USEPA, 1992) which considers atmospheric concentrations of these pollutants (mg m-3, evaluated by the dispersion model), daily intake through inhalation (mg kg-1 d-1), inhalation rate (m3 d-1), body weight (kg), average time (d), exposure time (d), exposure frequency (d), absorption factor and retention factor. Deterministic and probabilistic risk estimation of human health risks caused by exposure to these chemical pollutant discharges are conducted as well. From the findings of this study, it is suggested that the developed methodology is reliable in determining the risk these amine emissions from PCCC technology pose to human health. With this reliable and a universal approach it is possible to assess the fate of the amine emissions which remains a key area to address for the large scale CCS implementation.

Neuromorphic Computing for Very Large Test and Evaluation Data Analysis

DTIC Science & Technology

2014-05-01

analysis and utilization of newly available hardware- based artificial neural network chips. These two aspects of the program are complementary. The...neuromorphic architectures research focused on long term disruptive technologies with high risk but revolutionary potential. The hardware- based neural...today. Overall, hardware- based neural processing research allows us to study the fundamental system and architectural issues relevant for employing

1-to-1 Computing: A Measure of Success

ERIC Educational Resources Information Center

O'Hanlon, Charlene

2007-01-01

When Texas' Technology Immersion Project began in the spring of 2004, a grant from the US Department of Education allowed a parallel project to launch--eTxTIP--to evaluate and measure the success of the program, which equips middle school students in high-risk, high-need areas with laptops. Data is beginning to come in on several of the first…

Verification and validation of a patient simulator for test and evaluation of a laser doppler vibrometer

NASA Astrophysics Data System (ADS)

Byrd, Kenneth A.; Yauger, Sunny

2012-06-01

In the medical community, patient simulators are used to educate and train nurses, medics and doctors in rendering dierent levels of treatment and care to various patient populations. Students have the opportunity to perform real-world medical procedures without putting any patients at risk. A new thrust for the U.S. Army RDECOM CERDEC Night Vision and Electronic Sensors Directorate (NVESD), is the use of remote sensing technologies to detect human vital signs at stando distances. This capability will provide medics with the ability to diagnose while under re in addition to helping them to prioritize the care and evacuation of battleeld casualties. A potential alternative (or precursor) to human subject testing is the use of patient simulators. This substitution (or augmenting) provides a safe and cost eective means to develop, test, and evaluate sensors without putting any human subjects at risk. In this paper, we present a generalized framework that can be used to accredit patient simulator technologies as human simulants for remote physiological monitoring (RPM). Results indicate that we were successful in using a commercial Laser Doppler Vibrometer (LDV) to exploit pulse and respiration signals from a SimMan 3G patient simulator at stando (8 meters).

PREDIRCAM eHealth platform for individualized telemedical assistance for lifestyle modification in the treatment of obesity, diabetes, and cardiometabolic risk prevention: a pilot study (PREDIRCAM 1).

PubMed

González, Cintia; Herrero, Pau; Cubero, José M; Iniesta, José M; Hernando, M Elena; García-Sáez, Gema; Serrano, Alvaro J; Martinez-Sarriegui, Iñaki; Perez-Gandia, Carmen; Gómez, Enrique J; Rubinat, Esther; Alcantara, Valeria; Brugués, Eulalia; Chico, Ana; Mato, Eugenia; Bell, Olga; Corcoy, Rosa; de Leiva, Alberto

2013-07-01

Healthy diet and regular physical activity are powerful tools in reducing diabetes and cardiometabolic risk. Various international scientific and health organizations have advocated the use of new technologies to solve these problems. The PREDIRCAM project explores the contribution that a technological system could offer for the continuous monitoring of lifestyle habits and individualized treatment of obesity as well as cardiometabolic risk prevention. PREDIRCAM is a technological platform for patients and professionals designed to improve the effectiveness of lifestyle behavior modifications through the intensive use of the latest information and communication technologies. The platform consists of a web-based application providing communication interface with monitoring devices of physiological variables, application for monitoring dietary intake, ad hoc electronic medical records, different communication channels, and an intelligent notification system. A 2-week feasibility study was conducted in 15 volunteers to assess the viability of the platform. The website received 244 visits (average time/session: 17 min 45 s). A total of 435 dietary intakes were recorded (average time for each intake registration, 4 min 42 s ± 2 min 30 s), 59 exercises were recorded in 20 heart rate monitor downloads, 43 topics were discussed through a forum, and 11 of the 15 volunteers expressed a favorable opinion toward the platform. Food intake recording was reported as the most laborious task. Ten of the volunteers considered long-term use of the platform to be feasible. The PREDIRCAM platform is technically ready for clinical evaluation. Training is required to use the platform and, in particular, for registration of dietary food intake. © 2013 Diabetes Technology Society.

An evaluation of a risk-based environmental regulation in Brazil: Limitations to risk management of hazardous installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naime, Andre, E-mail: andre.naime.ibama@gmail.com

The environmental regulation of hazardous projects with risk-based decision-making processes can lead to a deficient management of human exposure to technological hazards. Such an approach for regulation is criticized for simplifying the complexity of decisions involving the economic, social, and environmental aspects of the installation and operation of hazardous facilities in urban areas. Results of a Brazilian case study indicate that oil and gas transmission pipelines may represent a threat to diverse communities if the relationship between such linear projects and human populations is overlooked by regulatory bodies. Results also corroborate known challenges to the implementation of EIA processes andmore » outline limitations to an effective environmental and risk management. Two preliminary topics are discussed to strengthen similar regulatory practices. Firstly, an effective integration between social impact assessment and risk assessment in EIA processes to have a more comprehensive understanding of the social fabric. Secondly, the advancement of traditional management practices for hazardous installations to pursue a strong transition from assessment and evaluation to management and control and to promote an effective interaction between land-use planning and environmental regulation.« less

Texting for Health: An Evaluation of a Population Approach to Type 2 Diabetes Risk Reduction With a Personalized Message.

PubMed

Khurshid, Anjum; Brown, Lisanne; Mukherjee, Snigdha; Abebe, Nebeyou; Kulick, David

2015-11-01

txt4health is an innovative, 14-week, interactive, population-based mobile health program for individuals at risk of type 2 diabetes, developed under the Beacon Community Program in the Greater New Orleans, La., area. A comprehensive social marketing campaign sought to enroll hard-to-reach, at-risk populations using a combination of mass media and face-to-face engagement in faith-based and retail environments. Little is known about the effectiveness of social marketing for mobile technology application in the general population. A systematic evaluation of the campaign identified successes and barriers to implementing a population-based mobile health program. Face-to-face engagement helped increase program enrollment after the initial launch; otherwise, enrollment leveled off over time. Results show positive trends in reaching target populations and in the use of mobile phones to record personal health information and set goals for reducing the risk of type 2 diabetes. The lessons from the txt4health campaign can help inform the development and programmatic strategies to provide a person-level intervention using a population-level approach for individuals at risk for diabetes as well as aid in chronic disease management.

A Techno-Economic Analysis of Emission Controls on Hydrocarbon Biofuel Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatt, Arpit; Zhang, Yimin; Davis, Ryan

Biofuels have the potential to reduce our dependency on petroleum-derived transportation fuels and decrease greenhouse gas (GHG) emissions. Although the overall GHG emissions from biofuels are expected to be lower when compared to those of petroleum fuels, the process of converting biomass feedstocks into biofuels emits various air pollutants, which may be subject to federal air quality regulation or emission limits. While prior research has evaluated the technical and economic feasibility of biofuel technologies, gaps still exist in understanding the regulatory issues associated with the biorefineries and their economic implications on biofuel production costs (referred to as minimum fuel sellingmore » price (MFSP) in this study). The aim of our research is to evaluate the economic impact of implementing emission reduction technologies at biorefineries and estimate the cost effectiveness of two primary control technologies that may be required for air permitting purposes. We analyze a lignocellulosic sugars-to-hydrocarbon biofuel production pathway developed by the National Renewable Energy Laboratory (NREL) and implement air emission controls in Aspen Plus to evaluate how they affect the MFSP. Results from this analysis can help inform decisions about biorefinery siting and sizing, as well as mitigate the risks associated with air permitting.« less

By-product metals are technologically essential but have problematic supply

PubMed Central

Nassar, N. T.; Graedel, T. E.; Harper, E. M.

2015-01-01

The growth in technological innovation that has occurred over the past decades has, in part, been possible because an increasing number of metals of the periodic table are used to perform specialized functions. However, there have been increasing concerns regarding the reliability of supply of some of these metals. A main contributor to these concerns is the fact that many of these metals are recovered only as by-products from a limited number of geopolitically concentrated ore deposits, rendering their supplies unable to respond to rapid changes in demand. Companionality is the degree to which a metal is obtained largely or entirely as a by-product of one or more host metals from geologic ores. The dependence of companion metal availability on the production of the host metals introduces a new facet of supply risk to modern technology. We evaluated companionality for 62 different metals and metalloids, and show that 61% (38 of 62) have companionality greater than 50%. Eighteen of the 38—including such technologically essential elements as germanium, terbium, and dysprosium—are further characterized as having geopolitically concentrated production and extremely low rates of end-of-life recycling. It is this subset of companion metals—vital in current technologies such as electronics, solar energy, medical imaging, energy-efficient lighting, and other state-of-the-art products—that may be at the greatest risk of supply constraints in the coming decades. PMID:26601159

Adverse pregnancy outcomes after in vitro fertilization: effect of number of embryos transferred and plurality at conception.

PubMed

Luke, Barbara; Stern, Judy E; Kotelchuck, Milton; Declercq, Eugene R; Hornstein, Mark D; Gopal, Daksha; Hoang, Lan; Diop, Hafsatou

2015-07-01

To evaluate risks for adverse pregnancy outcomes by number of embryos transferred (ET) and fetal heartbeats (FHB) in assisted reproductive technology-conceived singleton live births. Longitudinal cohort using cycles reported to the Society for Assisted Reproductive Technology Clinic Outcomes Reporting System between 2004 and 2008 among women who were treated and gave birth in Massachusetts. Not applicable. Assisted reproductive technology data on 6,073 births between 2004 and 2008 were linked to vital records and hospital data. Likelihood of ET ≥3 vs. 1-2, FHB >1 vs. 1, and risks of preterm birth (PTB, <37 weeks' gestation), low birth weight (LBW, <2,500 g), and small-for-gestational-age birth weight (SGA, <10th percentile) with FHB >1 were modeled with binary logistic regression using a backward-stepping algorithm, and presented as adjusted odds ratios (95% confidence intervals). None. ET ≥3, FHB >1, PTB, LBW, and SGA. Higher ET was significantly more likely with older maternal age, intracytoplasmic sperm injection, assisted hatching, cleavage-stage embryos, and thawed embryos. The likelihood of FHB >1 with ≥3 ET vs. 1-2 ET was 2.04 (1.68-2.48). Risks of PTB and LBW with FHB >1 were 1.63 (1.27-2.09) and 1.81 (1.36-2.39), respectively; the risk of SGA was not significant. Nulliparity was associated with higher risks of PTB (1.34 [1.12-1.59]), LBW (1.48 [1.20-1.83]), and SGA (2.17 [1.69-2.78]). Number of embryos transferred was strongly associated with FHBs, with twice the risk of FHB >1 with ≥3 ET vs. 1-2 ET. Increasing FHBs were associated with significantly greater risks for PTB and LBW outcomes. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

A systematic review of school-based eHealth interventions targeting alcohol use, smoking, physical inactivity, diet, sedentary behaviour and sleep among adolescents: a review protocol.

PubMed

Champion, Katrina E; Newton, Nicola C; Spring, Bonnie; Wafford, Q Eileen; Parmenter, Belinda J; Teesson, Maree

2017-12-06

Six key behavioural risk factors (risky alcohol use, smoking, poor diet, physical inactivity, sedentary behaviour and unhealthy sleep patterns) have been identified as strong determinants of chronic disease, such as cardiovascular disease, diabetes and cancers. School-based interventions targeting these multiple health risk behaviours among adolescents have the potential to halt the trajectory towards later disease, whilst online and mobile technology interventions offer advantages in terms of student engagement, reach and scalability. Despite this, the efficacy of eHealth school-based interventions targeting these six health risk behaviours among adolescents has not been evaluated. The proposed systematic review aims to address this by determining the nature and efficacy of existing eHealth school-based interventions targeting multiple health risk behaviours among adolescents. A systematic search of the MEDLINE, Embase, PsycINFO and Cochrane Library databases will be conducted to identify eligible published papers. Eligible studies will be randomised controlled trials, including cluster randomised controlled trials, of interventions targeting two or more of the following lifestyle risk behaviours: alcohol use, smoking, poor diet, physical inactivity, sedentary behaviour and sleep. Eligible studies will be those evaluating interventions delivered in a secondary school setting among participants 11-18 years of age, via an eHealth platform (Internet, computers of mobile technology). Two reviewers will independently screen studies for eligibility, extract data and assess the risk of bias. Study outcomes will be summarised in a narrative synthesis, and meta-analyses will be conducted where it is appropriate to combine studies. It is anticipated that the results from this review will serve to inform the development of future eHealth multiple health behaviour interventions for adolescents by identifying common characteristics of effective programs and highlighting knowledge gaps in the evidence base. PROSPERO CRD42017072163.

Delivery of integrated diabetes care using logistics and information technology--the Joint Asia Diabetes Evaluation (JADE) program.

PubMed

Chan, Juliana C N; Ozaki, Risa; Luk, Andrea; Kong, Alice P S; Ma, Ronald C W; Chow, Francis C C; Wong, Patrick; Wong, Rebecca; Chung, Harriet; Chiu, Cherry; Wolthers, Troels; Tong, Peter C Y; Ko, Gary T C; So, Wing-Yee; Lyubomirsky, Greg

2014-12-01

Diabetes is a global epidemic, and many affected individuals are undiagnosed, untreated, or uncontrolled. The silent and multi-system nature of diabetes and its complications, with complex care protocols, are often associated with omission of periodic assessments, clinical inertia, poor treatment compliance, and care fragmentation. These barriers at the system, patient, and care-provider levels have resulted in poor control of risk factors and under-usage of potentially life-saving medications such as statins and renin-angiotensin system inhibitors. However, in the clinical trial setting, use of nurses and protocol with frequent contact and regular monitoring have resulted in marked differences in event rates compared to epidemiological data collected in the real-world setting. The phenotypic heterogeneity and cognitive-psychological-behavioral needs of people with diabetes call for regular risk stratification to personalize care. Quality improvement initiatives targeted at patient education, task delegation, case management, and self-care promotion had the largest effect size in improving cardio-metabolic risk factors. The Joint Asia Diabetes Evaluation (JADE) program is an innovative care prototype that advocates a change in clinic setting and workflow, coordinated by a doctor-nurse team and augmented by a web-based portal, which incorporates care protocols and a validated risk engine to provide decision support and regular feedback. By using logistics and information technology, supported by a network of health-care professionals to provide integrated, holistic, and evidence-based care, the JADE Program aims to establish a high-quality regional diabetes database to reflect the status of diabetes care in real-world practice, confirm efficacy data, and identify unmet needs. Through collaborative efforts, we shall evaluate the feasibility, acceptability, and cost-effectiveness of this "high tech, soft touch" model to make diabetes and chronic disease care more accessible, affordable, and sustainable. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Lung magnetic resonance imaging for pneumonia in children.

PubMed

Liszewski, Mark C; Görkem, Süreyya; Sodhi, Kushaljit S; Lee, Edward Y

2017-10-01

Technical factors have historically limited the role of MRI in the evaluation of pneumonia in children in routine clinical practice. As imaging technology has advanced, recent studies utilizing practical MR imaging protocols have shown MRI to be an accurate potential alternative to CT for the evaluation of pneumonia and its complications. This article provides up-to-date MR imaging techniques that can be implemented in most radiology departments to evaluate pneumonia in children. Imaging findings in pneumonia on MRI are also reviewed. In addition, the current literature describing the diagnostic performance of MRI for pneumonia is discussed. Furthermore, potential risks and limitations of MRI for the evaluation of pneumonia in children are described.

Fuel-Flexible Gasification-Combustion Technology for Production of H2 and Sequestration-Ready CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parag Kulkarni; Jie Guan; Raul Subia

In the near future, the nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It is necessary to improve both the process efficiency and environmental impact of fossil fuel utilization including greenhouse gas management. GE Global Research (GEGR) investigated an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology with potential to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP technology offers the long-term potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions. GE was awarded a contract from U.S. DOEmore » NETL to investigate and develop the UFP technology. Work started on the Phase I program in October 2000 and on the Phase II effort in April 2005. In the UFP technology, coal, water and air are simultaneously converted into (1) hydrogen rich stream that can be utilized in fuel cells or turbines, (2) CO{sub 2} rich stream for sequestration, and (3) high temperature/pressure vitiated air stream to produce electricity in a gas turbine expander. The process produces near-zero emissions with an estimated efficiency higher than Integrated Gasification Combined Cycle (IGCC) process with conventional CO{sub 2} separation. The Phase I R&D program established the chemical feasibility of the major reactions of the integrated UFP technology through lab-, bench- and pilot-scale testing. A risk analysis session was carried out at the end of Phase I effort to identify the major risks in the UFP technology and a plan was developed to mitigate these risks in the Phase II of the program. The Phase II effort focused on three high-risk areas: economics, lifetime of solids used in the UFP process, and product gas quality for turbines (or the impact of impurities in the coal on the overall system). The economic analysis included estimating the capital cost as well as the costs of hydrogen and electricity for a full-scale UFP plant. These costs were benchmarked with IGCC polygen plants with similar level of CO{sub 2} capture. Based on the promising economic analysis comparison results (performed with the help from Worley Parsons), GE recommended a 'Go' decision in April 2006 to continue the experimental investigation of the UFP technology to address the remaining risks i.e. solids lifetime and the impact of impurities in the coal on overall system. Solids attrition and lifetime risk was addressed via bench-scale experiments that monitor solids performance over time and by assessing materials interactions at operating conditions. The product gas under the third reactor (high-temperature vitiated air) operating conditions was evaluated to assess the concentration of particulates, pollutants and other impurities relative to the specifications required for gas turbine feed streams. During this investigation, agglomeration of solids used in the UFP process was identified as a serious risk that impacts the lifetime of the solids and in turn feasibility of the UFP technology. The main causes of the solids agglomeration were the combination of oxygen transfer material (OTM) reduction at temperatures {approx}1000 C and interaction between OTM and CO{sub 2} absorbing material (CAM) at high operating temperatures (>1200 C). At the end of phase II, in March 2008, GEGR recommended a 'No-go' decision for taking the UFP technology to the next level of development, i.e. development of a 3-5 MW prototype system, at this time. GEGR further recommended focused materials development research programs on improving the performance and lifetime of solids materials used in UFP or chemical looping technologies. The scale-up activities would be recommended only after mitigating the risks involved with the agglomeration and overall lifetime of the solids. This is the final report for the phase II of the DOE-funded Vision 21 program entitled 'Fuel-Flexible Gasification-Combustion Technology for Production of H{sub 2} and Sequestration-Ready CO{sub 2}' (DOE Award No. DE-FC26-00NT40974). The report focuses on the major accomplishments and lessons learned in analyzing the risks of the novel UFP technology during Phase II of the DOE program.« less

Interpreting Space-Mission LET Requirements for SEGR in Power MOSFETs

NASA Technical Reports Server (NTRS)

Lauenstein, J. M.; Ladbury, R. L.; Batchelor, D. A.; Goldsman, N.; Kim, H. S.; Phan, A. M.

2010-01-01

A Technology Computer Aided Design (TCAD) simulation-based method is developed to evaluate whether derating of high-energy heavy-ion accelerator test data bounds the risk for single-event gate rupture (SEGR) from much higher energy on-orbit ions for a mission linear energy transfer (LET) requirement. It is shown that a typical derating factor of 0.75 applied to a single-event effect (SEE) response curve defined by high-energy accelerator SEGR test data provides reasonable on-orbit hardness assurance, although in a high-voltage power MOSFET, it did not bound the risk of failure.

Electric and hybrid vehicles environmental control subsystem study

NASA Technical Reports Server (NTRS)

1981-01-01

An environmental control subsystem (ECS) in the passenger compartment of electric and hybrid vehicles is studied. Various methods of obtaining the desired temperature control for the battery pack is also studied. The functional requirements of ECS equipment is defined. Following categorization by methodology, technology availability and risk, all viable ECS concepts are evaluated. Each is assessed independently for benefits versus risk, as well as for its feasibility to short, intermediate and long term product development. Selection of the preferred concept is made against these requirements, as well as the study's major goal of providing safe, highly efficient and thermally confortable ECS equipment.

Video performance for high security applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connell, Jack C.; Norman, Bradley C.

2010-06-01

The complexity of physical protection systems has increased to address modern threats to national security and emerging commercial technologies. A key element of modern physical protection systems is the data presented to the human operator used for rapid determination of the cause of an alarm, whether false (e.g., caused by an animal, debris, etc.) or real (e.g., a human adversary). Alarm assessment, the human validation of a sensor alarm, primarily relies on imaging technologies and video systems. Developing measures of effectiveness (MOE) that drive the design or evaluation of a video system or technology becomes a challenge, given the subjectivitymore » of the application (e.g., alarm assessment). Sandia National Laboratories has conducted empirical analysis using field test data and mathematical models such as binomial distribution and Johnson target transfer functions to develop MOEs for video system technologies. Depending on the technology, the task of the security operator and the distance to the target, the Probability of Assessment (PAs) can be determined as a function of a variety of conditions or assumptions. PAs used as an MOE allows the systems engineer to conduct trade studies, make informed design decisions, or evaluate new higher-risk technologies. This paper outlines general video system design trade-offs, discusses ways video can be used to increase system performance and lists MOEs for video systems used in subjective applications such as alarm assessment.« less

Measuring the Outcome of At-Risk Students on Biology Standardized Tests When Using Different Instructional Strategies

NASA Astrophysics Data System (ADS)

Burns, Dana

Over the last two decades, online education has become a popular concept in universities as well as K-12 education. This generation of students has grown up using technology and has shown interest in incorporating technology into their learning. The idea of using technology in the classroom to enhance student learning and create higher achievement has become necessary for administrators, teachers, and policymakers. Although online education is a popular topic, there has been minimal research on the effectiveness of online and blended learning strategies compared to the student learning in a traditional K-12 classroom setting. The purpose of this study was to investigate differences in standardized test scores from the Biology End of Course exam when at-risk students completed the course using three different educational models: online format, blended learning, and traditional face-to-face learning. Data was collected from over 1,000 students over a five year time period. Correlation analyzed data from standardized tests scores of eighth grade students was used to define students as "at-risk" for failing high school courses. The results indicated a high correlation between eighth grade standardized test scores and Biology End of Course exam scores. These students were deemed "at-risk" for failing high school courses. Standardized test scores were measured for the at-risk students when those students completed Biology in the different models of learning. Results indicated significant differences existed among the learning models. Students had the highest test scores when completing Biology in the traditional face-to-face model. Further evaluation of subgroup populations indicated statistical differences in learning models for African-American populations, female students, and for male students.

The Pittsburgh Cervical Cancer Screening Model: a risk assessment tool.

PubMed

Austin, R Marshall; Onisko, Agnieszka; Druzdzel, Marek J

2010-05-01

Evaluation of cervical cancer screening has grown increasingly complex with the introduction of human papillomavirus (HPV) vaccination and newer screening technologies approved by the US Food and Drug Administration. To create a unique Pittsburgh Cervical Cancer Screening Model (PCCSM) that quantifies risk for histopathologic cervical precancer (cervical intraepithelial neoplasia [CIN] 2, CIN3, and adenocarcinoma in situ) and cervical cancer in an environment predominantly using newer screening technologies. The PCCSM is a dynamic Bayesian network consisting of 19 variables available in the laboratory information system, including patient history data (most recent HPV vaccination data), Papanicolaou test results, high-risk HPV results, procedure data, and histopathologic results. The model's graphic structure was based on the published literature. Results from 375 441 patient records from 2005 through 2008 were used to build and train the model. Additional data from 45 930 patients were used to test the model. The PCCSM compares risk quantitatively over time for histopathologically verifiable CIN2, CIN3, adenocarcinoma in situ, and cervical cancer in screened patients for each current cytology result category and for each HPV result. For each current cytology result, HPV test results affect risk; however, the degree of cytologic abnormality remains the largest positive predictor of risk. Prior history also alters the CIN2, CIN3, adenocarcinoma in situ, and cervical cancer risk for patients with common current cytology and HPV test results. The PCCSM can also generate negative risk projections, estimating the likelihood of the absence of histopathologic CIN2, CIN3, adenocarcinoma in situ, and cervical cancer in screened patients. The PCCSM is a dynamic Bayesian network that computes quantitative cervical disease risk estimates for patients undergoing cervical screening. Continuously updatable with current system data, the PCCSM provides a new tool to monitor cervical disease risk in the evolving postvaccination era.

Nanotechnology risk perceptions and communication: emerging technologies, emerging challenges.

PubMed

Pidgeon, Nick; Harthorn, Barbara; Satterfield, Terre

2011-11-01

Nanotechnology involves the fabrication, manipulation, and control of materials at the atomic level and may also bring novel uncertainties and risks. Potential parallels with other controversial technologies mean there is a need to develop a comprehensive understanding of processes of public perception of nanotechnology uncertainties, risks, and benefits, alongside related communication issues. Study of perceptions, at so early a stage in the development trajectory of a technology, is probably unique in the risk perception and communication field. As such it also brings new methodological and conceptual challenges. These include: dealing with the inherent diversity of the nanotechnology field itself; the unfamiliar and intangible nature of the concept, with few analogies to anchor mental models or risk perceptions; and the ethical and value questions underlying many nanotechnology debates. Utilizing the lens of social amplification of risk, and drawing upon the various contributions to this special issue of Risk Analysis on Nanotechnology Risk Perceptions and Communication, nanotechnology may at present be an attenuated hazard. The generic idea of "upstream public engagement" for emerging technologies such as nanotechnology is also discussed, alongside its importance for future work with emerging technologies in the risk communication field. © 2011 Society for Risk Analysis.

Implications of cost-effectiveness analysis of medical technology. background paper number 5. four common x-ray procedures: problems and prospects for economic evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, J.L.; Krieger, M.J.

This paper is about the economic evaluation of diagnostic procedures. The issue of economic evaluation is explored in the context of four common diagnostic X-ray procedures: the chest X-ray, the skull X-ray, the barium enema study, and the excretory urogram. The paper is divided into two parts. The first part summarizes the different evaluative models underlying studies of the four diagnostic X-ray procedures and to lay out the strengths and weaknesses of each method. The second part contains four separate chapters summarizing what is known about the utilization, costs, risks, and benefits of each procedure, with particular emphasis on themore » evaluative methods employed.« less

Climate change, global food supply and risk of hunger

PubMed Central

Parry, Martin; Rosenzweig, Cynthia; Livermore, Matthew

2005-01-01

This paper reports the results of a series of research projects which have aimed to evaluate the implications of climate change for food production and risk of hunger. There are three sets of results: (a) for IS92a (previously described as a ‘business-as-usual’ climate scenario); (b) for stabilization scenarios at 550 and 750 ppm and (c) for Special Report on Emissions Scenarios (SRES). The main conclusions are: (i) the region of greatest risk is Africa; (ii) stabilization at 750 ppm avoids some but not most of the risk, while stabilization at 550 ppm avoids most of the risk and (iii) the impact of climate change on risk of hunger is influenced greatly by pathways of development. For example, a SRES B2 development pathway is characterized by much lower levels of risk than A2; and this is largely explained by differing levels of income and technology not by differing amounts of climate forcing. PMID:16433098

Summary of Plutonium-238 Production Alternatives Analysis Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Werner; Wade E. Bickford; David B. Lord

The Team implemented a two-phase evaluation process. During the first phase, a wide variety of past and new candidate facilities and processing methods were assessed against the criteria established by DOE for this assessment. Any system or system element selected for consideration as an alternative within the project to reestablish domestic production of Pu-238 must meet the following minimum criteria: Any required source material must be readily available in the United States, without requiring the development of reprocessing technologies or investments in systems to separate material from identified sources. It must be cost, schedule, and risk competitive with existing baselinemore » technology. Any identified facilities required to support the concept must be available to the program for the entire project life cycle (notionally 35 years, unless the concept is so novel as to require a shorter duration). It must present a solution that can generate at least 1.5 Kg of Pu-238 oxide per year, for at least 35 years. It must present a low-risk, near-term solution to the National Aeronautics and Space Administration’s urgent mission need. DOE has implemented this requirement by eliminating from project consideration any alternative with key technologies at less than Technology Readiness Level 5. The Team evaluated the options meeting these criteria using a more detailed assessment of the reasonable facility variations and compared them to the preferred option, which consists of target irradiation at the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR), target fabrication and chemical separations processing at the ORNL Radiochemical Engineering Development Center, and neptunium 237 storage at the Materials and Fuels Complex at INL. This preferred option is consistent with the Records of Decision from the earlier National Environmental Policy Act (NEPA) documentation« less

A genomics study of type 2 diabetes mellitus in U.S. Air Force personnel.

PubMed

Lott, Lisa

2009-07-01

The military community is at high risk for type 2 diabetes (T2D), especially as it relates to military beneficiaries, although preventive measures can be implemented to reduce disease onset. This study evaluates the prevalence of risk-associated single nucleotide polymorphisms in patients diagnosed with T2D within active duty, retired military, and military-dependent populations on Lackland Air Force Base compared to nondiabetic controls. Results will be used as a basis of comparison to analyze risk-conferring genotypes in the young, healthy active duty population to generate the prevalence of T2D risk-associated factors in our current and future war fighters. Identifying genetic markers of T2D prior to abnormal glucose control and insulin resistance may ultimately adjust future risk through early detection, healthy lifestyle modifications, and disease management programs. Copyright 2009 Diabetes Technology Society.

Evaluating oversight systems for emerging technologies: a case study of genetically engineered organisms.

PubMed

Kuzma, Jennifer; Najmaie, Pouya; Larson, Joel

2009-01-01

The U.S. oversight system for genetically engineered organisms (GEOs) was evaluated to develop hypotheses and derive lessons for oversight of other emerging technologies, such as nanotechnology. Evaluation was based upon quantitative expert elicitation, semi-standardized interviews, and historical literature analysis. Through an interdisciplinary policy analysis approach, blending legal, ethical, risk analysis, and policy sciences viewpoints, criteria were used to identify strengths and weaknesses of GEOs oversight and explore correlations among its attributes and outcomes. From the three sources of data, hypotheses and broader conclusions for oversight were developed. Our analysis suggests several lessons for oversight of emerging technologies: the importance of reducing complexity and uncertainty in oversight for minimizing financial burdens on small product developers; consolidating multi-agency jurisdictions to avoid gaps and redundancies in safety reviews; consumer benefits for advancing acceptance of GEO products; rigorous and independent pre- and post-market assessment for environmental safety; early public input and transparency for ensuring public confidence; and the positive role of public input in system development, informed consent, capacity, compliance, incentives, and data requirements and stringency in promoting health and environmental safety outcomes, as well as the equitable distribution of health impacts. Our integrated approach is instructive for more comprehensive analyses of oversight systems, developing hypotheses for how features of oversight systems affect outcomes, and formulating policy options for oversight of future technological products, especially nanotechnology products.

Risk assessment methodology applied to counter IED research & development portfolio prioritization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shevitz, Daniel W; O' Brien, David A; Zerkle, David K

2009-01-01

In an effort to protect the United States from the ever increasing threat of domestic terrorism, the Department of Homeland Security, Science and Technology Directorate (DHS S&T), has significantly increased research activities to counter the terrorist use of explosives. More over, DHS S&T has established a robust Counter-Improvised Explosive Device (C-IED) Program to Deter, Predict, Detect, Defeat, and Mitigate this imminent threat to the Homeland. The DHS S&T portfolio is complicated and changing. In order to provide the ''best answer'' for the available resources, DHS S&T would like some ''risk based'' process for making funding decisions. There is a definitemore » need for a methodology to compare very different types of technologies on a common basis. A methodology was developed that allows users to evaluate a new ''quad chart'' and rank it, compared to all other quad charts across S&T divisions. It couples a logic model with an evidential reasoning model using an Excel spreadsheet containing weights of the subjective merits of different technologies. The methodology produces an Excel spreadsheet containing the aggregate rankings of the different technologies. It uses Extensible Logic Modeling (ELM) for logic models combined with LANL software called INFTree for evidential reasoning.« less

Risk, mobility or population size? Drivers of technological richness among contact-period western North American hunter-gatherers.

PubMed

Collard, Mark; Buchanan, Briggs; O'Brien, Michael J; Scholnick, Jonathan

2013-11-19

Identifying factors that influence technological evolution in small-scale societies is important for understanding human evolution. There have been a number of attempts to identify factors that influence the evolution of food-getting technology, but little work has examined the factors that affect the evolution of other technologies. Here, we focus on variation in technological richness (total number of material items and techniques) among recent hunter-gatherers from western North America and test three hypotheses: (i) technological richness is affected by environmental risk, (ii) population size is the primary determinant of technological richness, and (iii) technological richness is constrained by residential mobility. We found technological richness to be correlated with a proxy for environmental risk-mean rainfall for the driest month-in the manner predicted by the risk hypothesis. Support for the hypothesis persisted when we controlled for shared history and intergroup contact. We found no evidence that technological richness is affected by population size or residential mobility. These results have important implications for unravelling the complexities of technological evolution.

Sharing risk between payer and provider by leasing health technologies: an affordable and effective reimbursement strategy for innovative technologies?

PubMed

Edlin, Richard; Hall, Peter; Wallner, Klemens; McCabe, Christopher

2014-06-01

The challenge of implementing high-cost innovative technologies in health care systems operating under significant budgetary pressure has led to a radical shift in the health technology reimbursement landscape. New reimbursement strategies attempt to reduce the risk of making the wrong decision, that is, paying for a technology that is not good value for the health care system, while promoting the adoption of innovative technologies into clinical practice. The remaining risk, however, is not shared between the manufacturer and the health care payer at the individual purchase level; it continues to be passed from the manufacturer to the payer at the time of purchase. In this article, we propose a health technology payment strategy-technology leasing reimbursement scheme-that allows the sharing of risk between the manufacturer and the payer: the replacing of up-front payments with a stream of payments spread over the expected duration of benefit from the technology, subject to the technology delivering the claimed health benefit. Using trastuzumab (Herceptin) in early breast cancer as an exemplar technology, we show how a technology leasing reimbursement scheme not only reduces the total budgetary impact of the innovative technology but also truly shares risk between the manufacturer and the health care system, while reducing the value of further research and thus promoting the rapid adoption of innovative technologies into clinical practice. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Decreasing the Risk of Adopting New Interactive Instructional Delivery Technologies.

ERIC Educational Resources Information Center

Dennis, Verl E.

1993-01-01

Discusses new interactive training technologies; considers risks of adopting a new technology; and presents the conceptual framework of technology life cycle analysis that provides timing information for the adoption of a new technology that should be used in addition to cost-benefit analysis and technical analysis. (LRW)

Materials, critical materials and clean-energy technologies

NASA Astrophysics Data System (ADS)

Eggert, R.

2017-07-01

Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess "what is critical" to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

Technology-assisted risk of bias assessment in systematic reviews: a prospective cross-sectional evaluation of the RobotReviewer machine learning tool.

PubMed

Gates, Allison; Vandermeer, Ben; Hartling, Lisa

2018-04-01

To evaluate the reliability of RobotReviewer's risk of bias judgments. In this prospective cross-sectional evaluation, we used RobotReviewer to assess risk of bias among 1,180 trials. We computed reliability with human reviewers using Cohen's kappa coefficient and calculated sensitivity and specificity. We investigated differences in reliability by risk of bias domain, topic, and outcome type using the chi-square test in meta-analysis. Reliability (95% CI) was moderate for random sequence generation (0.48 [0.43, 0.53]), allocation concealment (0.45 [0.40, 0.51]), and blinding of participants and personnel (0.42 [0.36, 0.47]); fair for overall risk of bias (0.34 [0.25, 0.44]); and slight for blinding of outcome assessors (0.10 [0.06, 0.14]), incomplete outcome data (0.14 [0.08, 0.19]), and selective reporting (0.02 [-0.02, 0.05]). Reliability for blinding of participants and personnel (P < 0.001), blinding of outcome assessors (P = 0.005), selective reporting (P < 0.001), and overall risk of bias (P < 0.001) differed by topic. Sensitivity and specificity (95% CI) ranged from 0.20 (0.18, 0.23) to 0.76 (0.72, 0.80) and from 0.61 (0.56, 0.65) to 0.95 (0.93, 0.96), respectively. Risk of bias appraisal is subjective. Compared with reliability between author groups, RobotReviewer's reliability with human reviewers was similar for most domains and better for allocation concealment, blinding of participants and personnel, and overall risk of bias. Copyright © 2018 Elsevier Inc. All rights reserved.

A multicriteria decision analysis of augmentative treatment of upper limbs in persons with tetraplegia.

PubMed

Hummel, J M Marjan; Snoek, Govert J; van Til, Janine A; van Rossum, Wouter; Ijzerman, Maarten J

2005-01-01

This study supported the evaluation by a rehabilitation team of the performance of two treatment options that improve the arm-hand function in subjects with sixth cervical vertebra (C6) level Motor Group 2 tetraplegia. The analytic hierarchy process, a technique for multicriteria decision analysis, was used by a rehabilitation team and potential recipients to quantitatively compare a new technology, Functional Elec trical Stimulation (FES), with conventional surgery. Perform-ance was measured by functional improvement, treatment load, risks, user-friendliness, and social outcomes. Functional improvement after FES was considered better than that after conventional surgery. However, the rehabilitation team's overall rating for conventional surgery was slightly higher than that for FES (57% vs 44%). Compared with the rehabilitation team, potential recipients gave greater weight to burden of treatment and less weight to functional improvement. This study shows that evaluation of new technology must be more comprehensive than the evaluation of functional improvement alone, and that patient preferences may differ from those of the rehabilitation team.

Emerging Use of Early Health Technology Assessment in Medical Product Development: A Scoping Review of the Literature.

PubMed

IJzerman, Maarten J; Koffijberg, Hendrik; Fenwick, Elisabeth; Krahn, Murray

2017-07-01

Early health technology assessment is increasingly being used to support health economic evidence development during early stages of clinical research. Such early models can be used to inform research and development about the design and management of new medical technologies to mitigate the risks, perceived by industry and the public sector, associated with market access and reimbursement. Over the past 25 years it has been suggested that health economic evaluation in the early stages may benefit the development and diffusion of medical products. Early health technology assessment has been suggested in the context of iterative economic evaluation alongside phase I and II clinical research to inform clinical trial design, market access, and pricing. In addition, performing early health technology assessment was also proposed at an even earlier stage for managing technology portfolios. This scoping review suggests a generally accepted definition of early health technology assessment to be "all methods used to inform industry and other stakeholders about the potential value of new medical products in development, including methods to quantify and manage uncertainty". The present review also aimed to identify recent published empirical studies employing an early-stage assessment of a medical product. With most included studies carried out to support a market launch, the dominant methodology was early health economic modeling. Further methodological development is required, in particular, by combining systems engineering and health economics to manage uncertainty in medical product portfolios.

Adoption of alternative financing strategies to increase the diffusion of picture archiving and communication systems into the radiology marketplace.

PubMed

Reiner, B; Siegel, E; McKay, P

2000-05-01

The objective of the study was to evaluate current marketplace conditions and strategies employed by major picture archiving and communication systems (PACS) vendors in the creation of alternative financing strategies, to enhance the diffusion of filmless imaging. Data were collected from the major PACS vendors in the forms of survey questionnaires and review of existing leases. Topics evaluated in the survey included current financing options available, foreseeable changes in PACS financing, role of third-party financiers, and creation of risk-sharing arrangements. Generic leases were also reviewed evaluating the presence or absence of several key variables including technology obsolescence protection, hardware/software upgrades, end-of-term options, determination of fair market value, functionality/acceptance testing, uptime guarantees, and workflow management consulting. Eight of the 10 PACS vendors surveyed participated in the data collection. The vast majority of current PACS implementations (60% to 90%) occur through direct purchase, with conventional leasing (operating or capital) accounting for only 5% to 30% of PACS installations. The majority of respondents view fee-for-lease arrangements and other forms of risk sharing as increasing importance for future PACS financing. The specific targets for such risk-sharing arrangements consist of small hospital and privately owned imaging centers. Leases currently offered range in duration from 3 to 5 years and frequently offer technology obsolescence protection with upgrades, multiple end-of-term options, and some form of acceptance testing. A number of important variables frequently omitted from leases include uptime guarantees, flexibility in changing financing or vendors, and incorporation of expected productivity/operational efficiency gains. As vendors strive to increase the penetration of PACS into the radiology marketplace, there will be a shift from conventional financing (loan or purchase) to leasing. Fee-for-use leasing and other forms of risk sharing have the greatest potential in smaller hospitals, which do not have the financial resources to pursue conventional financing options. Potential PACS customers must be cautious when entering into these alternative financing strategies, to ensure that appropriate safeguards are incorporated, in order to minimize downside risk.

Got risk? risk-centric perspective for spacecraft technology decision-making

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Cornford, Steven L.; Moran, Kelly

2004-01-01

A risk-based decision-making methodology conceived and developed at JPL and NASA has been used to aid in decision making for spacecraft technology assessment, adoption, development and operation. It takes a risk-centric perspective, through which risks are used as a reasoning step to interpose between mission objectives and risk mitigation measures.

Opportunities to integrate new approaches in genetic toxicology: an ILSI-HESI workshop report.

PubMed

Zeiger, Errol; Gollapudi, Bhaskar; Aardema, Marilyn J; Auerbach, Scott; Boverhof, Darrell; Custer, Laura; Dedon, Peter; Honma, Masamitsu; Ishida, Seiichi; Kasinski, Andrea L; Kim, James H; Manjanatha, Mugimane G; Marlowe, Jennifer; Pfuhler, Stefan; Pogribny, Igor; Slikker, William; Stankowski, Leon F; Tanir, Jennifer Y; Tice, Raymond; van Benthem, Jan; White, Paul; Witt, Kristine L; Thybaud, Véronique

2015-04-01

Genetic toxicity tests currently used to identify and characterize potential human mutagens and carcinogens rely on measurements of primary DNA damage, gene mutation, and chromosome damage in vitro and in rodents. The International Life Sciences Institute Health and Environmental Sciences Institute (ILSI-HESI) Committee on the Relevance and Follow-up of Positive Results in In Vitro Genetic Toxicity Testing held an April 2012 Workshop in Washington, DC, to consider the impact of new understanding of biology and new technologies on the identification and characterization of genotoxic substances, and to identify new approaches to inform more accurate human risk assessment for genetic and carcinogenic effects. Workshop organizers and speakers were from industry, academe, and government. The Workshop focused on biological effects and technologies that would potentially yield the most useful information for evaluating human risk of genetic damage. Also addressed was the impact that improved understanding of biology and availability of new techniques might have on genetic toxicology practices. Workshop topics included (1) alternative experimental models to improve genetic toxicity testing, (2) Biomarkers of epigenetic changes and their applicability to genetic toxicology, and (3) new technologies and approaches. The ability of these new tests and technologies to be developed into tests to identify and characterize genotoxic agents; to serve as a bridge between in vitro and in vivo rodent, or preferably human, data; or to be used to provide dose response information for quantitative risk assessment was also addressed. A summary of the workshop and links to the scientific presentations are provided. © 2014 Wiley Periodicals, Inc.

Environmental and social risk evaluation of overseas investment under the China-Pakistan Economic Corridor.

PubMed

Zhang, Ruilian; Andam, Francis; Shi, Guoqing

2017-06-01

Along with the further implementation of the "One Belt, One Road" initiative and the promotion of the China-Pakistan Economic Corridor (CPEC), the construction of the CPEC will likely face challenges owing to differences between China and Pakistan in politics, economics, culture, religion, language, customs, environmental management systems, environmental protection laws, social management systems, and social management regulations. To address potential environmental and social risks associated with Chinese enterprises as they invest in the CPEC region, this paper examines previous studies addressing topics such as the environmental and social safeguards of international institutions and Pakistan's domestic environmental and social management requirements. We then systematically identify the environmental and social risk factors involved in CPEC construction, which cover risks regarding water, air, soil, noise, biodiversity, politics, economics, culture, technology, and individuals. By establishing and calculating these risks and using a multi-fuzzy comprehensive evaluation model, we found that noise and individual risks belong to a medium risk category, while others belong to a higher risk category. In view of these risks, the Chinese government must create a friendly and peaceful environment for Chinese enterprises to invest in the CPEC region, and Chinese enterprises must adopt a development strategy of strength and capacity building and establish enterprises capable of addressing environmental and social issues during the investment process. All stakeholders must understand that if no determined and diligent steps are taken, CPEC construction might be doomed for failure from the start.

Safety issues in high speed machining

NASA Astrophysics Data System (ADS)

1994-05-01

There are several risks related to High-Speed Milling, but they have not been systematically determined or studied so far. Increased loads by high centrifugal forces may result in dramatic hazards. Flying tools or fragments from a tool with high kinetic energy may damage surrounding people, machines and devices. In the project, mechanical risks were evaluated, theoretic values for kinetic energies of rotating tools were calculated, possible damages of the flying objects were determined and terms to eliminate the risks were considered. The noise levels of the High-Speed Machining center owned by the Helsinki University of Technology (HUT) and the Technical Research Center of Finland (VTT) in practical machining situation were measured and the results were compared to those after basic preventive measures were taken.

Status of ERA Airframe Technology Demonstrators

NASA Technical Reports Server (NTRS)

Davis, Pamela; Jegley, Dawn; Rigney, Tom

2015-01-01

NASA has created the Environmentally Responsible Aviation (ERA) Project to explore and document the feasibility, benefits and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift-to-drag ratios, reduced drag, and lower community noise. The Airframe Technology subproject contains two elements. Under the Damage Arresting Composite Demonstration an advanced material system is being explored which will lead to lighter airframes that are more structural efficient than the composites used in aircraft today. Under the Adaptive Compliant Trailing Edge Flight Experiment a new concept of a flexible wing trailing edge is being evaluated which will reduce weight and improve aerodynamic performance. This presentation will describe the development these two airframe technologies.

[Application of risk-based approach for determination of critical factors in technology transfer of production of medicinal products].

PubMed

Beregovykh, V V; Spitskiy, O R

2014-01-01

Risk-based approach is used for examination of impact of different factors on quality of medicinal products in technology transfer. A general diagram is offered for risk analysis execution in technology transfer from pharmaceutical development to production. When transferring technology to full- scale commercial production it is necessary to investigate and simulate production process application beforehand in new real conditions. The manufacturing process is the core factorfor risk analysis having the most impact on quality attributes of a medicinal product. Further importantfactors are linked to materials and products to be handled and manufacturing environmental conditions such as premises, equipment and personnel. Usage of risk-based approach in designing of multipurpose production facility of medicinal products is shown where quantitative risk analysis tool RAMM (Risk Analysis and Mitigation Matrix) was applied.

TECHNICAL REPORT ON TECHNOLOGICALLY ENHANCED NATURALLY OCCURRING RADIOACTIVE MATERIALS FROM URANIUM MINING, VOLUME II: INVESTIGATION OF POTENTIAL HEALTH, GEOGRAPHIC, AND ENVIRONMENTAL ISSUES OF ABANDONED URANIUM MINES

EPA Science Inventory

Volume II investigates the potential radiogenic risks from abandoned uranium mines and evaluates which may pose the greatest hazards to members of the public and to the environment. The intent of this report is to identify who may be most likely to be exposed to wastes at small a...

Research in space commercialization, technology transfer and communications, vol. 2

NASA Technical Reports Server (NTRS)

Dunn, D. A.; Agnew, C. E.

1983-01-01

Spectrum management, models for evaluating communications systems, and implications of communications regulations for NASA are considered as major parts of communications policy. Marketing LANDSAT products in developing countries, a political systems analysis of LANDSAT, and private financing and operation of the space operations center (space station) are discussed. Investment requirements, risks, government support, and other primary business and management considerations are examined.

Evaluating the use of cell phone messaging for community Ebola syndromic surveillance in high risked settings in Southern Sierra Leone.

PubMed

Jia, Kangbai; Mohamed, Koroma

2015-09-01

Most underdeveloped countries do not meet core disease outbreak surveillance because of the lack of human resources, laboratory and infrastructural facilities. The use of cell phone technology for disease outbreak syndromic surveillance is a new phenomenon in Sierra Leone despite its successes in other developing countries like Sri Lanka. In this study we set to evaluate the effectiveness of using cell phone technology for Ebola hemorrhagic fever syndromic surveillance in a high risked community in Sierra Leone. This study evaluated the effectiveness of using cell phone messaging (text and calls) for community Ebola hemorrhagic fever syndromic surveillance in high risked community in southern Sierra Leone. All cell phone syndromic surveillance data used for this study was reported as cell phone alert messages-texts and voice calls; by the Moyamba District Health Management Team for both Ebola hemorrhagic fever suspect and mortalities. We conducted a longitudinal data analysis of the monthly cumulative confirmed Ebola hemorrhagic fever cases and mortalities collected by both the traditional sentinel and community cell phone syndromic surveillance from August 2014 to October 2014. A total of 129 and 49 Ebola hemorrhagic fever suspect and confirmed cases respectively were recorded using the community Ebola syndromic surveillance cell phone alert system by the Moyamba District Health Management Team in October 2014. The average number of Ebola hemorrhagic fever suspects and confirmed cases for October 2014 were 4.16 (Std.dev 3.76) and 1.58 (Std.dev 1.43) respectively. Thirty-four percent (n=76) of the community Ebola syndromic surveillance cell phone alerts that were followed-up within 24 hours reported Ebola hemorrhagic fever suspect cases while 65.92% (n=147) reported mortality. Our study suggests some form of underreporting by the traditional sentinel Ebola hemorrhagic fever disease surveillance system in Moyamba District southern Sierra Leone for August-September 2014. Cell phone messaging technology can be effectively use as a tool for community epidemic surveillance from peripheral health care facilities to higher levels.

Historical Relationship Between Performance Assessment for Radioactive Waste Disposal and Other Types of Risk Assessment in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

RECHARD,ROBERT P.

This paper describes the evolution of the process for assessing the hazards of a geologic disposal system for radioactive waste and, similarly, nuclear power reactors, and the relationship of this process with other assessments of risk, particularly assessments of hazards from manufactured carcinogenic chemicals during use and disposal. This perspective reviews the common history of scientific concepts for risk assessment developed to the 1950s. Computational tools and techniques developed in the late 1950s and early 1960s to analyze the reliability of nuclear weapon delivery systems were adopted in the early 1970s for probabilistic risk assessment of nuclear power reactors, amore » technology for which behavior was unknown. In turn, these analyses became an important foundation for performance assessment of nuclear waste disposal in the late 1970s. The evaluation of risk to human health and the environment from chemical hazards is built upon methods for assessing the dose response of radionuclides in the 1950s. Despite a shared background, however, societal events, often in the form of legislation, have affected the development path for risk assessment for human health, producing dissimilarities between these risk assessments and those for nuclear facilities. An important difference is the regulator's interest in accounting for uncertainty and the tools used to evaluate it.« less

Dulce Wireless Tijuana: A Randomized Control Trial Evaluating the Impact of Project Dulce and Short-Term Mobile Technology on Glycemic Control in a Family Medicine Clinic in Northern Mexico.

PubMed

Anzaldo-Campos, María Cecilia; Contreras, Sonia; Vargas-Ojeda, Adriana; Menchaca-Díaz, Rufino; Fortmann, Addie; Philis-Tsimikas, Athena

2016-04-01

The global epidemic of diabetes calls for innovative interventions. This study evaluated the effectiveness of the Project Dulce model, with and without wireless technology, on glycemic control and other clinical and self-reported outcomes in patients with poorly controlled type 2 diabetes in Mexico. Adults with type 2 diabetes and a glycated hemoglobin A1c (HbA1c) level of ≥8% were recruited from Family Medical Unit #27 of the Instituto Mexicano del Seguro Social (IMSS) in Tijuana, México, and randomly assigned to one of three groups: Project Dulce-only (PD); Project Dulce technology-enhanced with mobile tools (PD-TE); or IMSS standard of care/control group (CG). Clinical and self-reported outcomes were assessed at baseline, Month 4, and Month 10. Time-by-group interactions and within-group changes were analyzed. HbA1c reductions from baseline to Month 10 were significantly greater in PD-TE (-3.0% [-33 mmol/mol]) and PD (-2.6% [-28.7 mmol/mol]) compared with CG (-1.3% [-14.2 mmol/mol]) (P = 0.009 and 0.001, respectively). PD-TE and PD also exhibited significant improvement in diabetes knowledge when compared with CG (P < 0.05 for both). No statistically significant differences were detected between PD and PD-TE on these indicators (P = 0.54 and 0.86, respectively). Several within-group improvements were observed on other clinical and self-report indicators but did not vary significantly across groups. Project Dulce with and without wireless technology substantially improved glycemic control and diabetes knowledge in high-risk patients with type 2 diabetes in a Mexican family medical unit, suggesting that integrating peer-led education, nurse coordination, and 3G wireless technology is an effective approach for improving diabetes outcomes in high-risk populations.

Concurrent and Subsequent Associations between Daily Digital Technology Use and High-Risk Adolescents' Mental Health Symptoms

ERIC Educational Resources Information Center

George, Madeleine J.; Russell, Michael A.; Piontak, Joy R.; Odgers, Candice L.

2018-01-01

Adolescents are spending an unprecedented amount of time using digital technologies (especially mobile technologies), and there are concerns that adolescents' constant connectivity is associated with poor mental health, particularly among at-risk adolescents. Participants included 151 adolescents at risk for mental health problems (M[subscript…

[Pay attention to the human health risk of drinking low mineral water].

PubMed

Shu, Weiqun

2015-10-01

The consumption of low mineral drinking water has been increasing around the world with the shortage of water resources and the development of advanced water treatment technologies. Evidences from systematic document reviews, ecological epidemiological observations, and experimental drinking water intervention studies indicate that lack of minerals in drinking water may cause direct or indirect harm to human health, among which, the associations of magnesium in water with cardiovascular disease, as well as calcium in water with osteoporosis, are well proved by sufficient evidence. This article points out that it is urgent to pay more attention to the issues about establishment of health risk evaluation system on susceptible consuming population, establishment of lab evaluation system on water quality and health effect for non-traditional drinking water, and program of safety mineralization for demineralized or desalinated water and so on.

Recent advances in chemical imaging technology for the detection of contaminants for food safety and security

NASA Astrophysics Data System (ADS)

Priore, Ryan J.; Olkhovyk, Oksana; Drauch, Amy; Treado, Patrick; Kim, Moon; Chao, Kaunglin

2009-05-01

The need for routine, non-destructive chemical screening of agricultural products is increasing due to the health hazards to animals and humans associated with intentional and unintentional contamination of foods. Melamine, an industrial additive used to increase flame retardation in the resin industry, has recently been used to increase the apparent protein content of animal feed, of infant formula, as well as powdered and liquid milk in the dairy industry. Such contaminants, even at regulated levels, pose serious health risks. Chemical imaging technology provides the ability to evaluate large volumes of agricultural products before reaching the consumer. In this presentation, recent advances in chemical imaging technology that exploit Raman, fluorescence and near-infrared (NIR) are presented for the detection of contaminants in agricultural products.

Novel challenges of multi-society investigator-initiated studies: a paradigm shift for technique and technology evaluation.

PubMed

Schwaitzberg, Steven D; Hawes, Robert H; Rattner, David W; Kochman, Michael L

2013-08-01

The introduction of innovative techniques and novel technologies into clinical practice is a challenge that confronts all aspects of healthcare delivery. Upheaval from shrinking research funding and declining healthcare reimbursements now forces patients, doctors, hospitals, payers, regulators, and even health systems into conflict as new therapies struggle to find a place in the therapeutic armamentarium. The escalating costs of healthcare force all parties to consider both the medical risks/benefits as well as the economic efficiency of proposed tools and therapies. We highlight these challenges by examining the process of initiating and conducting a "society-as-investigator" clinical trial to assess the safety of the natural orifice translumenal endoscopic surgery (NOTES) approach to cholecystectomy in the context of the issues that confront technology diffusion today.

A Framework for the Evaluation of Biosecurity, Commercial, Regulatory, and Scientific Impacts of Plant Viruses and Viroids Identified by NGS Technologies

PubMed Central

Massart, Sebastien; Candresse, Thierry; Gil, José; Lacomme, Christophe; Predajna, Lukas; Ravnikar, Maja; Reynard, Jean-Sébastien; Rumbou, Artemis; Saldarelli, Pasquale; Škorić, Dijana; Vainio, Eeva J.; Valkonen, Jari P. T.; Vanderschuren, Hervé; Varveri, Christina; Wetzel, Thierry

2017-01-01

Recent advances in high-throughput sequencing technologies and bioinformatics have generated huge new opportunities for discovering and diagnosing plant viruses and viroids. Plant virology has undoubtedly benefited from these new methodologies, but at the same time, faces now substantial bottlenecks, namely the biological characterization of the newly discovered viruses and the analysis of their impact at the biosecurity, commercial, regulatory, and scientific levels. This paper proposes a scaled and progressive scientific framework for efficient biological characterization and risk assessment when a previously known or a new plant virus is detected by next generation sequencing (NGS) technologies. Four case studies are also presented to illustrate the need for such a framework, and to discuss the scenarios. PMID:28174561

Empirical Study on the Impact of a Tactical Biosurveillance Information Visualization on Users' Situational Awareness.

PubMed

Kettelhut, Valeriya V; Vanschooneveld, Trevor C; McClay, James C; Mercer, David F; Fruhling, Ann; Meza, Jane L

2017-03-01

Decisions on antibiotic-resistant infection (ARI) prevention in dynamic health care settings should be agile and target the right process at the right time. Health information technologies can aid the recognition of high-risk situations for ARI transmission and timely facilitate operators' situational awareness (SA) in various military and civilian health care locations or transport platforms. High SA is one of the significant predictors of better performance. The objective of this study was to evaluate the impact of the developed health information visualization (VIZ) on the users' SA regarding situations when risks of ARI transmission and exposure are high. The enrolled 19 subjects assessed the proposed VIZ artifacts representing 1 scenario, compared the VIZ effectiveness against the currently employed local methods, and reported their SA (perception and comprehension) with the use of a pre- and post-self-rating questionnaire. The results showed that the VIZ significantly increased SA in the study subjects and revealed the importance of communicating the risk of exposure to ARIs. The VIZ enabled the participants to quickly acknowledge the high-risk individuals (super-spreaders), locations (hot spots), and biosafety (deficient infection prevention). The study concluded that SA-oriented technologies may be promising for promoting better infection prevention practices. Reprint & Copyright © 2017 Association of Military Surgeons of the U.S.

Execution of a self-directed risk assessment methodology to address HIPAA data security requirements

NASA Astrophysics Data System (ADS)

Coleman, Johnathan

2003-05-01

This paper analyzes the method and training of a self directed risk assessment methodology entitled OCTAVE (Operationally Critical Threat Asset and Vulnerability Evaluation) at over 170 DOD medical treatment facilities. It focuses specifically on how OCTAVE built interdisciplinary, inter-hierarchical consensus and enhanced local capabilities to perform Health Information Assurance. The Risk Assessment Methodology was developed by the Software Engineering Institute at Carnegie Mellon University as part of the Defense Health Information Assurance Program (DHIAP). The basis for its success is the combination of analysis of organizational practices and technological vulnerabilities. Together, these areas address the core implications behind the HIPAA Security Rule and can be used to develop Organizational Protection Strategies and Technological Mitigation Plans. A key component of OCTAVE is the inter-disciplinary composition of the analysis team (Patient Administration, IT staff and Clinician). It is this unique composition of analysis team members, along with organizational and technical analysis of business practices, assets and threats, which enables facilities to create sound and effective security policies. The Risk Assessment is conducted in-house, and therefore the process, results and knowledge remain within the organization, helping to build consensus in an environment of differing organizational and disciplinary perspectives on Health Information Assurance.

Combining usability evaluations to highlight the chain that leads from usability flaws to usage problems and then negative outcomes.

PubMed

Watbled, Ludivine; Marcilly, Romaric; Guerlinger, Sandra; Bastien, J-M Christian; Beuscart-Zéphir, Marie-Catherine; Beuscart, Régis

2018-02-01

Poor usability of health technology is thought to diminish work system performance, increase error rates and, potentially, harm patients. The present study (i) used a combination of usability evaluation methods to highlight the chain that leads from usability flaws to usage problems experienced by users and, ultimately, to negative patient outcomes, and (ii) validated this approach by studying two different discharge summary production systems. To comply with quality guidelines, the process of drafting and sending discharge summaries is increasingly being automated. However, the usability of these systems may modify their impact (or the absence thereof) in terms of production times and quality, and must therefore be evaluated. Here, we applied three successive techniques for usability evaluation (heuristic evaluation, user testing and field observation) to two discharge summary production systems (underpinned by different technologies). The systems' main usability flaws led respectively to an increase in the time need to produce a discharge summary and the risk of patient misidentification. Our results are discussed with regard to the possibility of linking the usability flaws, usage problems and the negative outcomes by successively applying three methods for evaluating usability (heuristic evaluation, user testing and in situ observations) throughout the system development life cycle. Copyright © 2018 Elsevier Inc. All rights reserved.

2017 Emerging Technology Domains Risk Survey

DTIC Science & Technology

2017-10-01

REV-03.18.2016.0 2017 Emerging Technology Domains Risk Survey Daniel Klinedinst Joel Land Kyle O’Meara October 2017 TECHNICAL REPORT CMU/SEI...to the CERT/CC 2016 Emerging Technol- ogy Domains Risk Survey [King 2016]. This list does not supersede previous reports. Many of the previously... Survey [King 2016]. Table 1: New and Emerging Technologies Gartner’s 2015 List of New Technology CERT’s List of Emerging Domains Trust Boundary

Recent innovation of geospatial information technology to support disaster risk management and responses

NASA Astrophysics Data System (ADS)

Une, Hiroshi; Nakano, Takayuki

2018-05-01

Geographic location is one of the most fundamental and indispensable information elements in the field of disaster response and prevention. For example, in the case of the Tohoku Earthquake in 2011, aerial photos taken immediately after the earthquake greatly improved information sharing among different government offices and facilitated rescue and recovery operations, and maps prepared after the disaster assisted in the rapid reconstruction of affected local communities. Thanks to the recent development of geospatial information technology, this information has become more essential for disaster response activities. Advancements in web mapping technology allows us to better understand the situation by overlaying various location-specific data on base maps on the web and specifying the areas on which activities should be focused. Through 3-D modelling technology, we can have a more realistic understanding of the relationship between disaster and topography. Geospatial information technology can sup-port proper preparation and emergency responses against disasters by individuals and local communities through hazard mapping and other information services using mobile devices. Thus, geospatial information technology is playing a more vital role on all stages of disaster risk management and responses. In acknowledging geospatial information's vital role in disaster risk reduction, the Sendai Framework for Disaster Risk Reduction 2015-2030, adopted at the Third United Nations World Conference on Disaster Risk Reduction, repeatedly reveals the importance of utilizing geospatial information technology for disaster risk reduction. This presentation aims to report the recent practical applications of geospatial information technology for disaster risk management and responses.

Solar Electric Propulsion

NASA Technical Reports Server (NTRS)

LaPointe, Michael

2006-01-01

The Solar Electric Propulsion (SEP) technology area is tasked to develop near and mid-term SEP technology to improve or enable science mission capture while minimizing risk and cost to the end user. The solar electric propulsion investments are primarily driven by SMD cost-capped mission needs. The technology needs are determined partially through systems analysis tasks including the recent "Re-focus Studies" and "Standard Architecture Study." These systems analysis tasks transitioned the technology development to address the near term propulsion needs suitable for cost-capped open solicited missions such as Discovery and New Frontiers Class missions. Major SEP activities include NASA's Evolutionary Xenon Thruster (NEXT), implementing a Standard Architecture for NSTAR and NEXT EP systems, and developing a long life High Voltage Hall Accelerator (HiVHAC). Lower level investments include advanced feed system development and xenon recovery testing. Future plans include completion of ongoing ISP development activities and evaluating potential use of commercial electric propulsion systems for SMD applications. Examples of enhanced mission capability and technology readiness dates shall be discussed.

Increasing clinical presence of mobile communication technology: avoiding the pitfalls.

PubMed

Visvanathan, Akila; Gibb, Alan P; Brady, Richard R W

2011-10-01

Mobile communication technologies are employed in many diverse areas of healthcare delivery to provide improved quality and efficiency of communication and facilitate increased rapidity of data or information transfer. Mobile phones enable healthcare professionals to possess a portable platform from which to provide many healthcare-related applications and are a popular means to directly communicate with colleagues and patients. As involvement of mobile communication technology in healthcare delivery continues to rapidly expand, there are also important considerations of relevance to patient safety and security as a result. Here, we review the previous evidence of reported clinical risks associated with mobile communication technology, such as electromagnetic interference, confidentiality and data security, distraction/noise, infection control, and cross contamination. In conclusion, although mobile phones provide much putative potential improvement to healthcare delivery, further evaluation and research are required to both inform and protect health professionals and users of such technology in the healthcare environment and provide the evidence base to support the provision of clear and comprehensive guidelines.

Liability: the complicated task of licensing law enforcement technologies

NASA Astrophysics Data System (ADS)

Hops, Larry W.; Overlin, Trudy K.

1997-01-01

This paper discusses a situation where a company (licensor) requires a liability policy as a condition of a license agreement, when licensing law enforcement technologies. The purpose of this discussion is to evaluate the reasons behind the need for extensive liability policies to protect licensors when marketing their law enforcement technologies to private industry. Finding a solution to the problem, therefore reducing the potential for high liability insurance costs, would be desirable. Since the risks associated with most technologies are virtually unknown, and because such technologies are used in very unpredictable legal environments, alternative ways of guaranteeing research and development enterprises that they will be covered against product liability are needed. Without such protection, licensors may require licensees to indemnify them beyond the usual guarantees provided in a licensing agreement, which may make the license too costly for smaller businesses. When the share of the market is limited to larger corporations, competition suffers and ultimately the cost to law enforcement agencies increases.

Lean Stability augmentation study

NASA Technical Reports Server (NTRS)

Mcvey, J. B.; Kennedy, J. B.

1979-01-01

An analytical and experimental program was conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Three concepts for improving lean stability limits were selected for experimental evaluation among twelve approaches considered. Concepts were selected on the basis of the potential for improving stability limits and achieving emission goals, the technological risks associated with development of practical burners employing the concepts, and the penalties to airline direct operating costs resulting from decreased combustor performance, increased engine cost, increased maintenance cost and increased engine weight associated with implementation of the concepts. Tests of flameholders embodying the selected concepts were conducted.

Novel augmented reality solution for improving health literacy around antihypertensives in people living with type 2 diabetes mellitus: protocol of a technology evaluation study

PubMed Central

Ahmadvand, Alireza; Drennan, Judy; Burgess, Jean; Clark, Michele; Kavanagh, David; Burns, Kara; Howard, Sarah; Kelly, Fleur; Campbell, Chris; Nissen, Lisa

2018-01-01

Introduction Low health literacy is common in people with type 2 diabetes mellitus (T2DM) (up to 40%), associated with decreased self-efficacy in managing T2DM and its important complications, mainly hypertension. This study introduces, for the first time, an easy-to-use solution based on augmented reality (AR) on smartphones, to enhance health literacy around antihypertensive medicines. It assesses the feasibility of the solution for improving health literacy, oriented specifically to angiotensin II receptor blockers; embedding the health literacy improvement into the use cycle of angiotensin II receptor blockers and providing continuous access to information as a form of patient engagement. Methods and analysis This is a technology evaluation study with one technology group (AR plus usual care) and one non-technology group (usual care). Both groups receive face-to-face communications with community pharmacists regarding angiotensin II receptor blockers; the technology group receive additional AR-enhanced digital consumer medicine information throughout the use of their medications. The primary outcome is the change in health literacy and the hypothesis is that the proportions of people who show high health literacy will be larger in the technology group. Mixed effects models will be used to analyse solution effectiveness on outcomes. Multiple regression models will be used to find additional variables that might affect the relationship between health literacy and the AR solution. Ethics and dissemination Queensland University of Technology (QUT) Human Research Ethics Committee has approved the study as a low-risk technology evaluation study (approval number: 1700000275). Findings will be disseminated via attending scientific conferences and publishing in peer-reviewed journals. Facilitated by QUT, two press releases have been published in public media and two presentations have been made in university classrooms. PMID:29705754

Novel augmented reality solution for improving health literacy around antihypertensives in people living with type 2 diabetes mellitus: protocol of a technology evaluation study.

PubMed

Ahmadvand, Alireza; Drennan, Judy; Burgess, Jean; Clark, Michele; Kavanagh, David; Burns, Kara; Howard, Sarah; Kelly, Fleur; Campbell, Chris; Nissen, Lisa

2018-04-28

Low health literacy is common in people with type 2 diabetes mellitus (T2DM) (up to 40%), associated with decreased self-efficacy in managing T2DM and its important complications, mainly hypertension. This study introduces, for the first time, an easy-to-use solution based on augmented reality (AR) on smartphones, to enhance health literacy around antihypertensive medicines. It assesses the feasibility of the solution for improving health literacy, oriented specifically to angiotensin II receptor blockers; embedding the health literacy improvement into the use cycle of angiotensin II receptor blockers and providing continuous access to information as a form of patient engagement. This is a technology evaluation study with one technology group (AR plus usual care) and one non-technology group (usual care). Both groups receive face-to-face communications with community pharmacists regarding angiotensin II receptor blockers; the technology group receive additional AR-enhanced digital consumer medicine information throughout the use of their medications. The primary outcome is the change in health literacy and the hypothesis is that the proportions of people who show high health literacy will be larger in the technology group. Mixed effects models will be used to analyse solution effectiveness on outcomes. Multiple regression models will be used to find additional variables that might affect the relationship between health literacy and the AR solution. Queensland University of Technology (QUT) Human Research Ethics Committee has approved the study as a low-risk technology evaluation study (approval number: 1700000275). Findings will be disseminated via attending scientific conferences and publishing in peer-reviewed journals. Facilitated by QUT, two press releases have been published in public media and two presentations have been made in university classrooms. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Regulating the unknown: Managing the occupational health risks of nanomedical technologies and nanopharmaceuticals in the research laboratory

NASA Astrophysics Data System (ADS)

Ersin, Ozlem Hacer

Novel technologies and their resultant products demand fresh ways of thinking about pre-market risk analysis and post-market surveillance. A regulatory framework that is responsive to emerging knowledge about the hazards of novel technologies offers repeatable and transparent processes and remains economically and socially feasible. Workers are an especially vulnerable population who are exposed to unknown hazards of novel technologies and serve often as unwitting sentinels of impending risks. This Grounded Theory-based case study identifies gaps in our current ability to regulate novel technologies so as to minimize occupational health risks and offers necessary modifications for an environment that is conducive to proper regulation. Nanopharmaceuticals and the nano-based technologies at their base are used by way of exemplar technologies that are currently taxing the ability of the regulatory system to provide adequate oversight. Ambiguities of definition, absence of a tracking system (of who is doing nanotechnology research), and the paucity of scientific evidence to support risk management efforts are among the findings of the study and need to be addressed as ameliorative steps toward an effective regulatory structure.

Application of a web-based Decision Support System in risk management

NASA Astrophysics Data System (ADS)

Aye, Zar Chi; Jaboyedoff, Michel; Derron, Marc-Henri

2013-04-01

Increasingly, risk information is widely available with the help of advanced technologies such as earth observation satellites, global positioning technologies, coupled with hazard modeling and analysis, and geographical information systems (GIS). Even though it exists, no effort will be put into action if it is not properly presented to the decision makers. These information need to be communicated clearly and show its usefulness so that people can make better informed decision. Therefore, communicating available risk information has become an important challenge and decision support systems have been one of the significant approaches which can help not only in presenting risk information to the decision makers but also in making efficient decisions while reducing human resources and time needed. In this study, the conceptual framework of an internet-based decision support system is presented to highlight its importance role in risk management framework and how it can be applied in case study areas chosen. The main purpose of the proposed system is to facilitate the available risk information in risk reduction by taking into account of the changes in climate, land use and socio-economic along with the risk scenarios. It allows the users to formulate, compare and select risk reduction scenarios (mainly for floods and landslides) through an enhanced participatory platform with diverse stakeholders' involvement in the decision making process. It is based on the three-tier (client-server) architecture which integrates web-GIS plus DSS functionalities together with cost benefit analysis and other supporting tools. Embedding web-GIS provides its end users to make better planning and informed decisions referenced to a geographical location, which is the one of the essential factors in disaster risk reduction programs. Different risk reduction measures of a specific area (local scale) will be evaluated using this web-GIS tool, available risk scenarios obtained from Probabilistic Risk Assessment (PRA) model and the knowledge collected from experts. The visualization of the risk reduction scenarios can also be shared among the users on the web to support the on-line participatory process. In addition, cost-benefit ratios of the different risk reduction scenarios can be prepared in order to serve as inputs for high-level decision makers. The most appropriate risk reduction scenarios will be chosen using Multi-Criteria Evaluation (MCE) method by weighting different parameters according to the preferences and criteria defined by the users. The role of public participation has been changing from one-way communication between authorities, experts, stakeholders and citizens towards more intensive two-way interaction. Involving the affected public and interest groups can enhance the level of legitimacy, transparency, and confidence in the decision making process. Due to its important part in decision making, online participatory tool is included in the DSS in order to allow the involved stakeholders interactively in risk reduction and be aware of the existing vulnerability conditions of the community. Moreover, it aims to achieve a more transparent and better informed decision-making process. The system is under in progress and the first tools implemented will be presented showing the wide possibilities of new web technologies which can have a great impact on the decision making process. It will be applied in four pilot areas in Europe: French Alps, North Eastern Italy, Romania and Poland. Nevertheless, the framework will be designed and implemented in a way to be applicable in any other regions.

Evaluating supplier quality performance using fuzzy analytical hierarchy process

NASA Astrophysics Data System (ADS)

Ahmad, Nazihah; Kasim, Maznah Mat; Rajoo, Shanmugam Sundram Kalimuthu

2014-12-01

Evaluating supplier quality performance is vital in ensuring continuous supply chain improvement, reducing the operational costs and risks towards meeting customer's expectation. This paper aims to illustrate an application of Fuzzy Analytical Hierarchy Process to prioritize the evaluation criteria in a context of automotive manufacturing in Malaysia. Five main criteria were identified which were quality, cost, delivery, customer serviceand technology support. These criteria had been arranged into hierarchical structure and evaluated by an expert. The relative importance of each criteria was determined by using linguistic variables which were represented as triangular fuzzy numbers. The Center of Gravity defuzzification method was used to convert the fuzzy evaluations into their corresponding crisps values. Such fuzzy evaluation can be used as a systematic tool to overcome the uncertainty evaluation of suppliers' performance which usually associated with human being subjective judgments.

Work stress and subsequent risk of internet addiction among information technology engineers in Taiwan.

PubMed

Chen, Sung-Wei; Gau, Susan Shur-Fen; Pikhart, Hynek; Peasey, Anne; Chen, Shih-Tse; Tsai, Ming-Chen

2014-08-01

Work stress, as defined by the Demand-Control-Support (DCS) model and the Effort-Reward Imbalance (ERI) model, has been found to predict risks for depression, anxiety, and substance addictions, but little research is available on work stress and Internet addiction. The aims of this study are to assess whether the DCS and ERI models predict subsequent risks of Internet addiction, and to examine whether these associations might be mediated by depression and anxiety. A longitudinal study was conducted in a sample (N=2,550) of 21-55 year old information technology engineers without Internet addiction. Data collection included questionnaires covering work stress, demographic factors, psychosocial factors, substance addictions, Internet-related factors, depression and anxiety at wave 1, and the Internet Addiction Test (IAT) at wave 2. Ordinal logistic regression was used to assess the associations between work stress and IAT; path analysis was adopted to evaluate potentially mediating roles of depression and anxiety. After 6.2 months of follow-up, 14.0% of subjects became problematic Internet users (IAT 40-69) and 4.1% pathological Internet users (IAT 70-100). Job strain was associated with an increased risk of Internet addiction (odds ratio [OR] of having a higher IAT outcome vs. a lower outcome was 1.53); high work social support reduced the risk of Internet addiction (OR=0.62). High ER ratio (OR=1.61) and high overcommitment (OR=1.68) were associated with increased risks of Internet addiction. Work stress defined by the DCS and ERI models predicted subsequent risks of Internet addiction.

Assessment of flood risk in Tokyo metropolitan area

NASA Astrophysics Data System (ADS)

Hirano, J.; Dairaku, K.

2013-12-01

Flood is one of the most significant natural hazards in Japan. The Tokyo metropolitan area has been affected by several large flood disasters. Therefore, investigating potential flood risk in Tokyo metropolitan area is important for development of adaptation strategy for future climate change. We aim to develop a method for evaluating flood risk in Tokyo Metropolitan area by considering effect of historical land use and land cover change, socio-economic change, and climatic change. Ministry of land, infrastructure, transport and tourism in Japan published 'Statistics of flood', which contains data for flood causes, number of damaged houses, area of wetted surface, and total amount of damage for each flood at small municipal level. By using these flood data, we estimated damage by inundation inside a levee for each prefecture based on a statistical method. On the basis of estimated damage, we developed flood risk curves in the Tokyo metropolitan area, representing relationship between damage and exceedance probability of flood for the period 1976-2008 for each prefecture. Based on the flood risk curve, we attempted evaluate potential flood risk in the Tokyo metropolitan area and clarify the cause for regional difference of flood risk. By analyzing flood risk curves, we found out regional differences of flood risk. We identified high flood risk in Tokyo and Saitama prefecture. On the other hand, flood risk was relatively low in Ibaraki and Chiba prefecture. We found that these regional differences of flood risk can be attributed to spatial distribution of entire property value and ratio of damaged housing units in each prefecture.We also attempted to evaluate influence of climate change on potential flood risk by considering variation of precipitation amount and precipitation intensity in the Tokyo metropolitan area. Results shows that we can evaluate potential impact of precipitation change on flood risk with high accuracy by using our methodology. Acknowledgments This study is conducted as part of the research subject "Vulnerability and Adaptation to Climate Change in Water Hazard Assessed Using Regional Climate Scenarios in the Tokyo Region' (National Research Institute for Earth Science and Disaster Prevention; PI: Koji Dairaku) of Research Program on Climate Change Adaptation (RECCA) and was supported by the SOUSEI Program, funded by Ministry of Education, Culture, Sports, Science and Technology, Government of Japan

Composite Payload Fairing Structural Architecture Assessment and Selection

NASA Technical Reports Server (NTRS)

Krivanek, Thomas M.; Yount, Bryan C.

2012-01-01

This paper provides a summary of the structural architecture assessments conducted and a recommendation for an affordable high performance composite structural concept to use on the next generation heavy-lift launch vehicle, the Space Launch System (SLS). The Structural Concepts Element of the Advanced Composites Technology (ACT) project and its follow on the Lightweight Spacecraft Structures and Materials (LSSM) project was tasked with evaluating a number of composite construction technologies for specific Ares V components: the Payload Shroud, the Interstage, and the Core Stage Intertank. Team studies strived to address the structural challenges, risks and needs for each of these vehicle components. Leveraging off of this work, the subsequent Composites for Exploration (CoEx) effort is focused on providing a composite structural concept to support the Payload Fairing for SLS. This paper documents the evaluation and down selection of composite construction technologies and evolution to the SLS Payload Fairing. Development of the evaluation criteria (also referred to as Figures of Merit or FOMs), their relative importance, and association to vehicle requirements are presented. A summary of the evaluation results, and a recommendation of the composite concept to baseline in the Composites for Exploration (CoEx) project is presented. The recommendation for the SLS Fairing is a Honeycomb Sandwich architecture based primarily on affordability and performance with two promising alternatives, Hat stiffened and Fiber Reinforced Foam (FRF) identified for eventual program block upgrade.

A new method to evaluate future impact of vehicle safety technology in Sweden.

PubMed

Strandroth, Johan; Sternlund, Simon; Tingvall, Claes; Johansson, Roger; Rizzi, Matteo; Kullgren, Anders

2012-10-01

In the design of a safe road transport system there is a need to better understand the safety challenges lying ahead. One way of doing that is to evaluate safety technology with retrospective analysis of crashes. However, by using retros- pective data there is the risk of adapting safety innovations to scenarios irrelevant in the future. Also, challenges arise as safety interventions do not act alone but are rather interacting components in a complex road transport system. The objective of this study was therefore to facilitate the prioritizing of road safety measures by developing and applying a new method to consider possible impact of future vehicle safety technology. The key point was to project the chain of events leading to a crash today into the crashes for a given time in the future. Assumptions on implementation on safety technologies were made and these assump- tions were applied on the crashes of today. It was estimated which crashes would be prevented and the residual was analyzed to identify the characteristics of future crashes. The Swedish Transport Administration's in-depth studies of fatal crashes from 2010 involving car passengers (n=156) were used. This study estimated that the number of killed car occupant would be reduced with 53 percent from the year 2010 to 2020. Through this new method, valuable information regarding the characteristic of the future crashes was found. The results of this study showed that it was possible to evaluate future impact of vehicle safety technology if detailed and representative crash data is available.

A GIS technology based potential eco-risk assessment of metals in urban soils in Beijing, China.

PubMed

Wang, Meie; Bai, Yanying; Chen, Weiping; Markert, Bernd; Peng, Chi; Ouyang, Zhiyun

2012-02-01

Ecological risks of heavy metals in urban soils were evaluated using Beijing, China as an example. Cadmium, Cu, Zn, Pb, Cr and Ni contents of 233 surface soils sampled by 1 min latitude × 1 min longitude grid were used to identify their spatial distribution patterns and potential emission sources. Throughout the city, longer the duration of urbanization greater was the accumulations of heavy metals especially, Cd, Cu, Pb, and Zn. The soil Zn mainly came from the wears of vehicular tires. Point source emissions of heavy metals were few and far in the downwind south-east quadrant of Beijing. The calculated risk indices showed potential median eco-risks in the ancient central city. No potential high eco-risk due to soil-borne heavy metals was found. The potential medium eco-risk areas in Beijing would expand from the initial 24 to 110 km(2) if soil pH were to reduce by 0.5 units in anticipation. Copyright © 2011 Elsevier Ltd. All rights reserved.

"Psychogeritechnology" in Japan: Exemplars from a super-aged society.

PubMed

Leroi, Iracema; Watanabe, Kentaro; Hird, Nick; Sugihara, Taro

2018-05-31

The burgeoning field of gerontechnology, which is the interdisciplinary field of applying technology to ageing issues, has focused primarily on "active ageing" and maintaining independence for older adults. To date, there has been less focus on people who develop dementia. Here, we argue for the field of gerontechnology to have a greater emphasis on clinical applications for dementia. This can be captured under the rubric of "psychogeritechnology," a term we have coined to describe the range of technology approaches to the prevention, prediction, screening, assessment, diagnosis, management, and monitoring of people at risk of, or living with, dementia. Using Japan as the world's leading "super-aged' nation as a paradigm, the purpose of this paper is to provide a narrative review of the use of innovative technology for the diagnosis, management and support of people at risk of, or living with, dementia. By following the "life course" of dementia, we will use clinical exemplars and case studies of psychogeritechnological applications from a Japanese context, specific to each stage of dementia, from the preclinical to the advanced stage. In the preclinical stage, the focus will be on prevention and early detection of degenerative cognitive-functional trajectories. In the early-stage of dementia, we will outline examples of screening, assessment, diagnosis, and clinical monitoring, as well as the use of technology to support independent living and autonomy. In the moderate stage, examples of safety monitoring systems, and assistive technology to foster independence, quality of life will be outlined. Finally, in the advanced stage of dementia, our focus will be on assistive technology in the care home setting, and the need to foster secure and efficient communication among care providers. We will discuss these applications in terms of the evolution of the "technological roadmap" for dementia, and the need for a theoretical underpinning for the field, a meaningful and flexible evaluation framework, and consideration of the "wider perspective" including safety-critical issues, ethical issues, and the relation to policy and health economics. Japan, as a rapidly ageing society, is on the forefront of developing technology to support people with dementia. The new field of psychogeritechnology must harness the potential of such developments, while furthering the methodology to implement and evaluate the changes. Copyright © 2018 John Wiley & Sons, Ltd.

Understanding consumer attitudes toward food technologies in Canada.

PubMed

Henson, Spencer; Annou, Mamane; Cranfield, John; Ryks, Joanne

2008-12-01

This article reports a study on consumer attitudes to 21 food and nonfood technologies in Canada. The study involves repertory grid interviews with 36 food consumers, the data from which are analyzed using generalized Procrustes analysis. Results highlight the role of perceived risk and perceived benefit in determining the acceptability of the technologies, with individual technologies lying along a continuum between the two. For technology as a whole and the 21 specific technologies, the perceived risk and perceived benefit constructs were the dominant determinants of consumer acceptability. While perceptions of perceived risk and perceived benefit differed between individual respondents, there were very limited consistent relations with a range of sociodemographic variables.

Efficient Portfolios of the Energy Technologies

NASA Astrophysics Data System (ADS)

Nikonov, Oleg I.; Medvedeva, Marina A.

2011-09-01

The goal of the research is to apply the methods of Portfolio Theory to a set of technologies instead of to a set of securities on a stock market (as it is the case in the original model). Assets on the stock market are objects that have risk and return, parameters that depend on uncertain factors and thus are uncertain. The returns from the use of technologies also depend on uncertain factors and thus each technology has a certain amount of risk. The simultaneous use of technologies could diversify the risks that are associated with technologies just the same way as diversification works on the stock market.

An evolving-requirements technology assessment process for advanced propulsion concepts

NASA Astrophysics Data System (ADS)

McClure, Erin Kathleen

The following dissertation investigates the development of a methodology suitable for the evaluation of advanced propulsion concepts. At early stages of development, both the future performance of these concepts and their requirements are highly uncertain, making it difficult to forecast their future value. Developing advanced propulsion concepts requires a huge investment of resources. The methodology was developed to enhance the decision-makers understanding of the concepts, so that they could mitigate the risks associated with developing such concepts. A systematic methodology to identify potential advanced propulsion concepts and assess their robustness is necessary to reduce the risk of developing advanced propulsion concepts. Existing advanced design methodologies have evaluated the robustness of technologies or concepts to variations in requirements, but they are not suitable to evaluate a large number of dissimilar concepts. Variations in requirements have been shown to impact the development of advanced propulsion concepts, and any method designed to evaluate these concepts must incorporate the possible variations of the requirements into the assessment. In order to do so, a methodology was formulated to be capable of accounting for two aspects of the problem. First, it had to systemically identify a probabilistic distribution for the future requirements. Such a distribution would allow decision-makers to quantify the uncertainty introduced by variations in requirements. Second, the methodology must be able to assess the robustness of the propulsion concepts as a function of that distribution. This dissertation describes in depth these enabling elements and proceeds to synthesize them into a new method, the Evolving Requirements Technology Assessment (ERTA). As a proof of concept, the ERTA method was used to evaluate and compare advanced propulsion systems that will be capable of powering a hurricane tracking, High Altitude, Long Endurance (HALE) unmanned aerial vehicle (UAV). The use of the ERTA methodology to assess HALE UAV propulsion concepts demonstrated that potential variations in requirements do significantly impact the assessment and selection of propulsion concepts. The proof of concept also demonstrated that traditional forecasting techniques, such as the cross impact analysis, could be used to forecast the requirements for advanced propulsion concepts probabilistically. "Fitness", a measure of relative goodness, was used to evaluate the concepts. Finally, stochastic optimizations were used to evaluate the propulsion concepts across the range of requirement sets that were considered.

Investigating the Environmental Effects of Ocean Energy Generation (Invited)

NASA Astrophysics Data System (ADS)

Copping, A. E.; Anderson, R.; Schultz, I.; Woodruff, D.; Carlson, T.; Ward, J.; van Cleve, F.; Eere Mhk Environmental Effects

2010-12-01

The production of electricity from the moving waters of the ocean has the potential to be a viable addition to the portfolio of renewable energy sources worldwide. The marine and hydrokinetic (MHK) industry seeks to deploy and operate devices that harvest energy from the tides, waves, ocean currents and run of the river. Challenges facing the emerging industry include technology development, rigors of offshore deployments, and financing; however, the barrier most commonly cited by industry, regulators, and stakeholders is the uncertainty surrounding potential environmental effects of devices placed in the water and the permitting processes associated with those impacts. There is a need to evaluate the extensive list of potential interactions that may cause harm to marine organisms and ecosystems, to set priorities for regulatory triggers, and to direct future research. Project developers need information to understand how to minimize environmental effects; regulators need to know what monitoring targets are needed near ocean energy farms; and stakeholders need to know what mitigation strategies are effective in addressing unavoidable impacts. Scientists from Pacific Northwest National Laboratory (PNNL) are developing an Environmental Risk Evaluation System (ERES) to assess environmental effects associated with MHK technologies and projects through a systematic analytical process, with specific input from key stakeholder groups. The ERES development process provides the scientific structure to support risk characterization, comparison of tradeoffs, and risk-informed decision-making by project and technology developers, regulatory agencies, and other interested stakeholders. The PNNL team will determine the range and severity of environmental effects of MHK development, leading to the development of mitigation strategies where residual risk remains. Input to ERES draws from a wide range of marine and freshwater studies to understand which marine receptors may suffer damage from specific portions of MHK devices, mooring systems, or electrical cabling. However little is known about the effects of certain MHK stressors such as electromagnetic fields (EMF) from underwater cables and machines, as well as acoustic outputs from rotating turbines. Laboratory investigations into the effects of EMF and acoustics on test organisms will be discussed, and preliminary results presented.

[Simplified models of analysis of the sources of risk and biomechanical overload in craft industries: application experience in wooden barrel making].

PubMed

Pressiani, Sofia

2011-01-01

Barrel making is an ancient art evidence of which is found in paintings from the Egyptian era in the Mediterranean civilizations, and since it was an ideal shipping container its use spread quickly and on a wide scale. The study was conducted in a small high quality craft industry, applying the method which is the topic of this volume, i.e., risk pre-mapping by which it is possible to identify the presence or absence of occupational risk and any need for further evaluation. The study showed the presence of health risks for workers, which were mainly physical (noise, vibrations produced by machinery and equipment typical of the craft, and risks from hardwood dust, in addition to the traditional risks of biomechanical overload of the upper limbs. Today, the barrel maker is a professional craft of excellence and quality, dedicated to the creation of large barrels and vats, using woods of different essences depending on the organoleptic qualities that it is desired should influence the final flavour of the wine: the manual art and the equipment are ancient but the technology used to achieve the final product is necessarily advanced. So far issues of safety and health risks related to this type of industry have received little attention and the risks poorly evaluated, with the possibility that occupational diseases may occur among the operators, particularly of the skeletal-muscular type.

Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation questionnaire, and a scoring formula.

BOK-Printed Electronics

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2013-01-01

The use of printed electronics technologies (PETs), 2D or 3D printing approaches either by conventional electronic fabrication or by rapid graphic printing of organic or nonorganic electronic devices on various small or large rigid or flexible substrates, is projected to grow exponentially in commercial industry. This has provided an opportunity to determine whether or not PETs could be applicable for low volume and high-reliability applications. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the current status of organic and printed electronics technologies. It reviews three key industry roadmaps- on this subject-OE-A, ITRS, and iNEMI-each with a different name identification for this emerging technology. This followed by a brief review of the status of the industry on standard development for this technology, including IEEE and IPC specifications. The report concludes with key technologies and applications and provides a technology hierarchy similar to those of conventional microelectronics for electronics packaging. Understanding key technology roadmaps, parameters, and applications is important when judicially selecting and narrowing the follow-up of new and emerging applicable technologies for evaluation, as well as the low risk insertion of organic, large area, and printed electronics.

An Approach for Performance Assessments of Extravehicular Activity Gloves

NASA Technical Reports Server (NTRS)

Aitchison, Lindsay; Benosn, Elizabeth

2014-01-01

The Space Suit Assembly (SSA) Development Team at NASA Johnson Space Center has invested heavily in the advancement of rear-entry planetary exploration suit design but largely deferred development of extravehicular activity (EVA) glove designs, and accepted the risk of using the current flight gloves, Phase VI, for unique mission scenarios outside the Space Shuttle and International Space Station (ISS) Program realm of experience. However, as design reference missions mature, the risks of using heritage hardware have highlighted the need for developing robust new glove technologies. To address the technology gap, the NASA Game-Changing Technology group provided start-up funding for the High Performance EVA Glove (HPEG) Project in the spring of 2012. The overarching goal of the HPEG Project is to develop a robust glove design that increases human performance during EVA and creates pathway for future implementation of emergent technologies, with specific aims of increasing pressurized mobility to 60% of barehanded capability, increasing the durability by 100%, and decreasing the potential of gloves to cause injury during use. The HPEG Project focused initial efforts on identifying potential new technologies and benchmarking the performance of current state of the art gloves to identify trends in design and fit leading to establish standards and metrics against which emerging technologies can be assessed at both the component and assembly levels. The first of the benchmarking tests evaluated the quantitative mobility performance and subjective fit of two sets of prototype EVA gloves developed ILC Dover and David Clark Company as compared to the Phase VI. Both companies were asked to design and fabricate gloves to the same set of NASA provided hand measurements (which corresponded to a single size of Phase Vi glove) and focus their efforts on improving mobility in the metacarpal phalangeal and carpometacarpal joints. Four test subjects representing the design-to hand anthropometry completed range of motion, grip/pinch strength, dexterity, and fit evaluations for each glove design in pressurized conditions, with and without thermal micrometeoroid garments (TMG) installed. This paper provides a detailed description of hardware and test methodologies used and lessons learned.

Decentralized peri-urban wastewater treatment technologies assessment integrating sustainability indicators.

PubMed

Mena-Ulecia, Karel; Hernández, Heykel Hernández

2015-01-01

Selection of treatment technologies without considering the environmental, economic and social factors associated with each geographical context risks the occurrence of negative impacts that were not properly foreseen, working against the sustainable performance of the technology. The principal aim of this study was to evaluate 12 technologies for decentralized treatment of domestic wastewater applicable to peri-urban communities using sustainability approaches and, at the same time, continuing a discussion about how to address a more integrated assessment of overall sustainability. For this, a set of 13 indicators that embody the environmental, economic and social approach for the overall sustainability assessment were used by means of a target plot diagram as a tool for integrating indicators that represent a holistic analysis of the technologies. The obtained results put forward different degrees of sustainability, which led to the selection of: septic tank+land infiltration; up-flow anaerobic reactor+high rate trickling filter and septic tank+anaerobic filter as the most sustainable and attractive technologies to be applied in peri-urban communities, according to the employed indicators.

New vision in fractional radiofrequency technology with switching, vacuum and cooling.

PubMed

Elman, Monica; Gauthier, Nelly; Belenky, Inna

2015-04-01

Since the introduction of fractional technology, various systems were launched to the market. The first generation of fractional RF systems created epidermal ablation with coagulative/necrosis of the dermis with sufficient clinical outcomes, but with some limitations. The aim of this study was to evaluate the efficacy and safety of SVC technology, based on the principle of separate biological responses. Fifty-two patients were treated for 3-6 sessions using fractional RF handpiece and eight patients received combination treatments with non-invasive RF handpiece. All volunteers showed notable to significant improvement in the photoageing symptoms, without any significant complications or adverse events. Due to its wide spectrum of parameters, the SVC technology can promote different biological responses. Owing to the "Switching" technology, the control of energy depth penetration enables delivery of the necessary thermal dose to the targeted skin layer. In addition, this novel technology includes the "Vacuum" and "Cooling" mechanisms, each contributing to the safety of the treatment. The Smart Heat function reduces the necessary energy levels and thereby reduces the pain level and risks for side effects.

Intraoperative angiography provides objective assessment of skin perfusion in complex knee reconstruction.

PubMed

Wyles, Cody C; Taunton, Michael J; Jacobson, Steven R; Tran, Nho V; Sierra, Rafael J; Trousdale, Robert T

2015-01-01

Wound necrosis is a potentially devastating complication of complex knee reconstruction. Laser-assisted indocyanine green angiography (LA-ICGA) is a technology that has been described in the plastic surgery literature to provide an objective assessment of skin perfusion in the operating room. This novel technology uses a plasma protein bound dye (ICG) and a camera unit that is calibrated to view the frequency emitted by the dye. The intention of this technology is to offer real-time visualization of blood flow to skin and soft tissue in a way that might help surgeons make decisions about closure or coverage of a surgical site based on blood flow, potentially avoiding soft tissue reconstruction while preventing skin necrosis or wound breakdown after primary closures, but its efficacy is untested in the setting of complex TKA. The purpose of this study was to evaluate perfusion borders and tension ischemia in a series of complex knee reconstructions to guide optimal wound management. Beginning in mid-2011, an LA-ICGA system was used to evaluate soft tissue viability in knee reconstruction procedures that were considered high risk for wound complications. Seven patients undergoing complex primary or revision TKA from 2011 to 2013 were included. These patients were chosen as a convenience sample of knee reconstruction procedures for which we obtained consultation with the plastic surgery service. The perfusion of skin and soft tissue coverage was evaluated intraoperatively for all patients with the LA-ICGA system, and the information was used to guide wound management. Followup was at a mean of 9 months (range, 6-17 months), no patients were lost to followup, and the main study endpoint was uneventful healing of the surgical incision. All seven closures went on to heal without necrosis. One patient, however, was subsequently revised for a deep periprosthetic infection 4 months after their knee reconstruction and underwent flap coverage at the time of that revision. Implementation of LA-ICGA provides an objective intraoperative assessment of soft tissue perfusion. This technology may help guide the surgeon's decisions about wound closure in real-time to accommodate the perfusion challenges unique to each patient. Specifically, patients with medical risk factors for poor perfusion or wound healing (such as diabetes, peripheral vascular disease, tobacco use, corticosteroid therapy, infection) or anatomical/surgical risk factors (ie, previous surgery about the reconstruction site, trauma wounds, or reconstruction of severe deformity) may benefit from objective intraoperative information regarding perfusion of the wound site. Furthermore, LA-ICGA could be used to prospectively evaluate the physiologic impact of different wound closure techniques. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Factors Influencing Rapid Prototyping Innovation Implementation: A Descriptive Model

DTIC Science & Technology

1990-03-01

strategy. NDI can be considered as a balance of risk and technological advancement allowing the services to have a system in the field into the...The U.S. military no longer must go through the long, tedious series of events required by the peacetime research and development and service approval...developed, fielded, and evaluated by the fleet in conjunction with fleet introduction (Interim Service Approval). Rapid prototyping conceptually represents

Health and safety implications of alternative energy technologies. I. Geothermal and biomass

NASA Astrophysics Data System (ADS)

Watson, A. P.; Etnier, E. L.

1981-07-01

An evaluation of potential occupational and public health aspects of geopressure, hydrothermal, hot dry rock, silviculture, crop and animal residues, fermentable plant products, municipal waste, and plantation energy technologies has been performed. Future development of these energy options in the United States will contain hazards that could easily be eliminated by safer equipment design and common-sense attention to operation and maintenance. Occupational exposure to hydrogen sulfide gas occurs near all geothermal sites and wherever organic matter decomposes anaerobically. Respiratory damage has occurred to laborers in geothermal fields, while farm workers have been fatally overcome when employed near agitating liquid manure systems. However, the most frequent and severe of reported injuries to geothermal workers is dermal exposure to caustic sludges produced by H2S abatement systems. Principal health and safety considerations of biomass pathways are directly related to the diffuse nature of solar energy fixation by photosynthesis and subsequent transfer to animal food chains. Since the potential fuel is in an unconcentrated form, cultivation, harvest, and transport are necessarily laborintensive. Thus, a significant potential for occupational injuries and fatalities exists. Of all biomass systems evaluated, direct burning of solid fuels presents the greatest public health risk. Data are presented to characterize the population at risk and the frequency and severity of injuries.

Technology Development Risk Assessment for Space Transportation Systems

NASA Technical Reports Server (NTRS)

Mathias, Donovan L.; Godsell, Aga M.; Go, Susie

2006-01-01

A new approach for assessing development risk associated with technology development projects is presented. The method represents technology evolution in terms of sector-specific discrete development stages. A Monte Carlo simulation is used to generate development probability distributions based on statistical models of the discrete transitions. Development risk is derived from the resulting probability distributions and specific program requirements. Two sample cases are discussed to illustrate the approach, a single rocket engine development and a three-technology space transportation portfolio.

The effectiveness of mobile-health technology-based health behaviour change or disease management interventions for health care consumers: a systematic review.

PubMed

Free, Caroline; Phillips, Gemma; Galli, Leandro; Watson, Louise; Felix, Lambert; Edwards, Phil; Patel, Vikram; Haines, Andy

2013-01-01

Mobile technologies could be a powerful media for providing individual level support to health care consumers. We conducted a systematic review to assess the effectiveness of mobile technology interventions delivered to health care consumers. We searched for all controlled trials of mobile technology-based health interventions delivered to health care consumers using MEDLINE, EMBASE, PsycINFO, Global Health, Web of Science, Cochrane Library, UK NHS HTA (Jan 1990-Sept 2010). Two authors extracted data on allocation concealment, allocation sequence, blinding, completeness of follow-up, and measures of effect. We calculated effect estimates and used random effects meta-analysis. We identified 75 trials. Fifty-nine trials investigated the use of mobile technologies to improve disease management and 26 trials investigated their use to change health behaviours. Nearly all trials were conducted in high-income countries. Four trials had a low risk of bias. Two trials of disease management had low risk of bias; in one, antiretroviral (ART) adherence, use of text messages reduced high viral load (>400 copies), with a relative risk (RR) of 0.85 (95% CI 0.72-0.99), but no statistically significant benefit on mortality (RR 0.79 [95% CI 0.47-1.32]). In a second, a PDA based intervention increased scores for perceived self care agency in lung transplant patients. Two trials of health behaviour management had low risk of bias. The pooled effect of text messaging smoking cessation support on biochemically verified smoking cessation was (RR 2.16 [95% CI 1.77-2.62]). Interventions for other conditions showed suggestive benefits in some cases, but the results were not consistent. No evidence of publication bias was demonstrated on visual or statistical examination of the funnel plots for either disease management or health behaviours. To address the limitation of the older search, we also reviewed more recent literature. Text messaging interventions increased adherence to ART and smoking cessation and should be considered for inclusion in services. Although there is suggestive evidence of benefit in some other areas, high quality adequately powered trials of optimised interventions are required to evaluate effects on objective outcomes.

Army Independent Risk Assessment Guidebook

DTIC Science & Technology

2014-04-01

17 5.4.2 Step 2: Gather relevant technology and alternative information............... 17 5.4.3 Step 3: Secure SME support for readiness...level assessment. ................... 17 5.4.4 Step 4: SMEs assess TRL, IRL, and MRL for each technology. .............. 17 5.4.5 Step 5: Identify...technical risks, risk ratings, and mitigations. .................. 20 5.4.6 Step 6: SMEs identify key technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fred D. Brent; Lalit Shah; Earl Berry

The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which uses petroleum coke to produce at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals using ChevronTexaco's proprietary gasification technology. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site; develop a Research, Development, and Testing (RD&T) Plan to mitigate technical risks and barriers; and prepare a Preliminary Project Financing Plan. The objective of Phase IImore » is to implement the work as outlined in the Phase I RD&T Plan to enhance the development and commercial acceptance of coproduction technology. The objective of Phase III is to develop an engineering design package and a financing and testing plan for an EECP located at a specific site. The project's intended result is to provide the necessary technical, economic, and environmental information needed by industry to move the EECP forward to detailed design, construction, and operation. The partners in this project are Texaco Energy Systems LLC or TES (a subsidiary of ChevronTexaco), General Electric (GE), Praxair, and Kellogg Brown & Root (KBR) in addition to the U.S. Department of Energy (DOE). TES is providing gasification technology and Fischer-Tropsch (F-T) technology developed by Rentech, GE is providing combustion turbine technology, Praxair is providing air separation technology, and KBR is providing engineering. Each of the EECP subsystems was assessed for technical risks and barriers. A plan was developed to mitigate the identified risks (Phase II RD&T Plan, October 2000). The potential technical and economic risks to the EECP from Task 2.5 can be mitigated by demonstrating that the end-use products derived from the upgrading of the F-T synthesis total liquid product can meet or exceed current specifications for the manufacture of ethylene and propylene chemicals from F-T naphtha, for the generation of hydrogen from F-T naphtha to power fuel cells, for direct blending of F-T diesels into transportation fuels, for the conversion of F-T heavy product wax to transportation fuels, and the conversion of F-T Heavy product wax to a valuable high melting point food-grade specialty wax product. Product evaluations conducted under Task 2.5 of Phase II successfully mitigated the above technical and economic risks to the EECP with the development of product yields and product qualities for the production of chemicals, transportation fuels, and specialty food-grade waxes from the F-T synthesis products.« less

Application of biomarkers in cancer risk management: evaluation from stochastic clonal evolutionary and dynamic system optimization points of view.

PubMed

Li, Xiaohong; Blount, Patricia L; Vaughan, Thomas L; Reid, Brian J

2011-02-01

Aside from primary prevention, early detection remains the most effective way to decrease mortality associated with the majority of solid cancers. Previous cancer screening models are largely based on classification of at-risk populations into three conceptually defined groups (normal, cancer without symptoms, and cancer with symptoms). Unfortunately, this approach has achieved limited successes in reducing cancer mortality. With advances in molecular biology and genomic technologies, many candidate somatic genetic and epigenetic "biomarkers" have been identified as potential predictors of cancer risk. However, none have yet been validated as robust predictors of progression to cancer or shown to reduce cancer mortality. In this Perspective, we first define the necessary and sufficient conditions for precise prediction of future cancer development and early cancer detection within a simple physical model framework. We then evaluate cancer risk prediction and early detection from a dynamic clonal evolution point of view, examining the implications of dynamic clonal evolution of biomarkers and the application of clonal evolution for cancer risk management in clinical practice. Finally, we propose a framework to guide future collaborative research between mathematical modelers and biomarker researchers to design studies to investigate and model dynamic clonal evolution. This approach will allow optimization of available resources for cancer control and intervention timing based on molecular biomarkers in predicting cancer among various risk subsets that dynamically evolve over time.

Taking a Concept to Commercialization: Designing Relevant Tests to Address Safety.

PubMed

Ferrara, Lisa A

2016-04-01

Taking a product from concept to commercialization requires careful navigation of the regulatory pathway through a series of steps: (A) moving the idea through proof of concept and beyond; (B) evaluating new technologies that may provide added value to the idea; (C) designing appropriate test strategies and protocols; and (D) evaluating and mitigating risks. Moving an idea from the napkin stage of development to the final product requires a team effort. When finished, the product rarely resembles the original design, but careful steps throughout the product life cycle ensure that the product meets the vision.

Recent advances in laser in situ keratomileusis-associated dry eye.

PubMed

Xie, Wenjia

2016-03-01

Dry eye is the most common complication after laser in situ keratomileusis (LASIK). The major cause of LASIK-associated dry eye is corneal nerve damage. Early identification and treatment of post-operative dry eye are essential to prevent further ocular surface damage. This article reviews the recent studies of LASIK-associated dry eye, including clinical features, aetiology, risk factors, evaluations and treatment. The applications of novel technologies in LASIK-associated dry eye evaluation like anterior segment spectral-domain optical coherence tomography (SD-OCT) and corneal confocal microscopy are also introduced in this review. © 2016 Optometry Australia.

Heritage and Advanced Technology Systems Engineering Lessons Learned from NASA Space Missions

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn; Bacskay, Allen

2010-01-01

Use of heritage and new technology is necessary/enabling to implementing small, low cost missions, yet overruns decrease the ability to sustain future mission flight rates The majority of the cost growth drivers seen in the D&NF study were embedded early during formulation phase and later realized during the development and I&T phases Cost drivers can be avoided or significantly decreased by project management and SE emphasis on early identification of risks and realistic analyses SE processes that emphasize an assessment of technology within the mission system to identify technical issues in the design or operational use of the technology. Realistic assessment of new and heritage spacecraft technology assumptions , identification of risks and mitigation strategies. Realistic estimates of effort required to inherit existing or qualify new technology, identification of risks to estimates and develop mitigation strategies. Allocation of project reserves for risk-based mitigation strategies of each individual area of heritage or new technology. Careful tailoring of inheritance processes to ensure due diligence.

Use of advanced treatment technologies among men at low risk of dying from prostate cancer.

PubMed

Jacobs, Bruce L; Zhang, Yun; Schroeck, Florian R; Skolarus, Ted A; Wei, John T; Montie, James E; Gilbert, Scott M; Strope, Seth A; Dunn, Rodney L; Miller, David C; Hollenbeck, Brent K

2013-06-26

The use of advanced treatment technologies (ie, intensity-modulated radiotherapy [IMRT] and robotic prostatectomy) for prostate cancer is increasing. The extent to which these advanced treatment technologies have disseminated among patients at low risk of dying from prostate cancer is uncertain. To assess the use of advanced treatment technologies, compared with prior standards (ie, traditional external beam radiation treatment [EBRT] and open radical prostatectomy) and observation, among men with a low risk of dying from prostate cancer. Using Surveillance, Epidemiology, and End Results (SEER)-Medicare data, we identified a retrospective cohort of men diagnosed with prostate cancer between 2004 and 2009 who underwent IMRT (n = 23,633), EBRT (n = 3926), robotic prostatectomy (n = 5881), open radical prostatectomy (n = 6123), or observation (n = 16,384). Follow-up data were available through December 31, 2010. The use of advanced treatment technologies among men unlikely to die from prostate cancer, as assessed by low-risk disease (clinical stage ≤T2a, biopsy Gleason score ≤6, and prostate-specific antigen level ≤10 ng/mL), high risk of noncancer mortality (based on the predicted probability of death within 10 years in the absence of a cancer diagnosis), or both. In our cohort, the use of advanced treatment technologies increased from 32% (95% CI, 30%-33%) to 44% (95% CI, 43%-46%) among men with low-risk disease (P < .001) and from 36% (95% CI, 35%-38%) to 57% (95% CI, 55%-59%) among men with high risk of noncancer mortality (P < .001). The use of these advanced treatment technologies among men with both low-risk disease and high risk of noncancer mortality increased from 25% (95% CI, 23%-28%) to 34% (95% CI, 31%-37%) (P < .001). Among all patients diagnosed in SEER, the use of advanced treatment technologies for men unlikely to die from prostate cancer increased from 13% (95% CI, 12%-14%), or 129.2 per 1000 patients diagnosed with prostate cancer, to 24% (95% CI, 24%-25%), or 244.2 per 1000 patients diagnosed with prostate cancer (P < .001). Among men diagnosed with prostate cancer between 2004 and 2009 who had low-risk disease, high risk of noncancer mortality, or both, the use of advanced treatment technologies has increased.

Online Social Networking, Sexual Risk and Protective Behaviors: Considerations for Clinicians and Researchers.

PubMed

Holloway, Ian W; Dunlap, Shannon; Del Pino, Homero E; Hermanstyne, Keith; Pulsipher, Craig; Landovitz, Raphael J

2014-09-01

Online social networking refers to the use of internet-based technologies that facilitate connection and communication between users. These platforms may be accessed via computer or mobile device (e.g., tablet, smartphone); communication between users may include linking of profiles, posting of text, photo and video content, instant messaging and email. This review provides an overview of recent research on the relationship between online social networking and sexual risk and protective behaviors with a focus on use of social networking sites (SNS) among young people and populations at high risk for sexually transmitted infections (STIs). While findings are mixed, the widespread use of SNS for sexual communication and partner seeking presents opportunities for the delivery and evaluation of public health interventions. Results of SNS-based interventions to reduce sexual risk are synthesized in order to offer hands-on advice for clinicians and researchers interested in engaging patients and study participants via online social networking.

Study on Ecological Risk Assessment of Guangxi Coastal Zone Based on 3s Technology

NASA Astrophysics Data System (ADS)

Zhong, Z.; Luo, H.; Ling, Z. Y.; Huang, Y.; Ning, W. Y.; Tang, Y. B.; Shao, G. Z.

2018-05-01

This paper takes Guangxi coastal zone as the study area, following the standards of land use type, divides the coastal zone of ecological landscape into seven kinds of natural wetland landscape types such as woodland, farmland, grassland, water, urban land and wetlands. Using TM data of 2000-2015 such 15 years, with the CART decision tree algorithm, for analysis the characteristic of types of landscape's remote sensing image and build decision tree rules of landscape classification to extract information classification. Analyzing of the evolution process of the landscape pattern in Guangxi coastal zone in nearly 15 years, we may understand the distribution characteristics and change rules. Combined with the natural disaster data, we use of landscape index and the related risk interference degree and construct ecological risk evaluation model in Guangxi coastal zone for ecological risk assessment results of Guangxi coastal zone.

Decision making in child protective services: a risky business?

PubMed

Camasso, Michael J; Jagannathan, Radha

2013-09-01

Child Protective Services (CPS) in the United States has received a torrent of criticism from politicians, the media, child advocate groups, and the general public for a perceived propensity to make decisions that are detrimental to children and families. This perception has resulted in numerous lawsuits and court takeovers of CPS in 35 states, and calls for profound restructuring in other states. A widely prescribed remedy for decision errors and faulty judgments is an improvement of risk assessment strategies that enhance hazard evaluation through an improved understanding of threat potentials and exposure likelihoods. We examine the reliability and validity problems that continue to plague current CPS risk assessment and discuss actions that can be taken in the field, including the use of receiver operating characteristic (ROC) curve technology to improve the predictive validity of risk assessment strategies. © 2012 Society for Risk Analysis.

Evaluation of Critical Care Monitor Technology During the US Navy Strong Angel Exercise

NASA Technical Reports Server (NTRS)

Johannesen, John; Rasbury, Jack

2003-01-01

The NASA critical path road map identifies "trauma and acute medical problems" as a clinical capability risk category (http://criticalDath.isc.nasa.gov). Specific risks include major trauma, organ laceration or contusion, hemoperitoneum, pulmonary failure, pneumo- and hemothorax, burn, open bone fracture, blunt head trauma, and penetrating injury. Mitigation of these risks includes the capability for critical care monitoring. Currently, the International Space Station (ISS) Crew Health Care System (CHeCS) does not provide such a capability. The Clinical Space Medicine Strategic Planning Forum (4/8/97), sponsored by NASA Medical Operations, identified the development of trauma care capabilities as one of the top priorities for space medicine. The Clinical Care Capability Development Project (CCCDP) subsequently undertook the task to address this need.

Infectious Disease Transmission during Organ and Tissue Transplantation

PubMed Central

Kuehnert, Matthew J.; Fishman, Jay A.

2012-01-01

Infectious disease transmission through organ and tissue transplantation has been associated with severe complications in recipients. Determination of donor-derived infectious risk associated with organ and tissue transplantation is challenging and limited by availability and performance characteristics of current donor epidemiologic screening (e.g., questionnaire) and laboratory testing tools. Common methods and standards for evaluating potential donors of organs and tissues are needed to facilitate effective data collection for assessing the risk for infectious disease transmission. Research programs can use advanced microbiological technologies to define infectious risks posed by pathogens that are known to be transplant transmissible and provide insights into transmission potential of emerging infectious diseases for which transmission characteristics are unknown. Key research needs are explored. Stakeholder collaboration for surveillance and research infrastructure is required to enhance transplant safety. PMID:22840823

The Aviation System Monitoring and Modeling (ASMM) Project: A Documentation of its History and Accomplishments: 1999-2005

NASA Technical Reports Server (NTRS)

Statler, Irving C. (Editor)

2007-01-01

The Aviation System Monitoring and Modeling (ASMM) Project was one of the projects within NASA s Aviation Safety Program from 1999 through 2005. The objective of the ASMM Project was to develop the technologies to enable the aviation industry to undertake a proactive approach to the management of its system-wide safety risks. The ASMM Project entailed four interdependent elements: (1) Data Analysis Tools Development - develop tools to convert numerical and textual data into information; (2) Intramural Monitoring - test and evaluate the data analysis tools in operational environments; (3) Extramural Monitoring - gain insight into the aviation system performance by surveying its front-line operators; and (4) Modeling and Simulations - provide reliable predictions of the system-wide hazards, their causal factors, and their operational risks that may result from the introduction of new technologies, new procedures, or new operational concepts. This report is a documentation of the history of this highly successful project and of its many accomplishments and contributions to improved safety of the aviation system.

The international politics of geoengineering: The feasibility of Plan B for tackling climate change

PubMed Central

Corry, Olaf

2017-01-01

Geoengineering technologies aim to make large-scale and deliberate interventions in the climate system possible. A typical framing is that researchers are exploring a ‘Plan B’ in case mitigation fails to avert dangerous climate change. Some options are thought to have the potential to alter the politics of climate change dramatically, yet in evaluating whether they might ultimately reduce climate risks, their political and security implications have so far not been given adequate prominence. This article puts forward what it calls the ‘security hazard’ and argues that this could be a crucial factor in determining whether a technology is able, ultimately, to reduce climate risks. Ideas about global governance of geoengineering rely on heroic assumptions about state rationality and a generally pacific international system. Moreover, if in a climate engineered world weather events become something certain states can be made directly responsible for, this may also negatively affect prospects for ‘Plan A’, i.e. an effective global agreement on mitigation. PMID:29386754

Environmental cancer risks

NASA Astrophysics Data System (ADS)

Bell, Peter M.

In a long-awaited report (‘Assessment of Technologies for Determining Cancer Risks From the Environment’), the U.S. Office of Technology Assessment (OTA) has evaluated the role of environmental factors in cancer diseases. Environment is interpreted broadly as encompassing anything that interacts with humans, including the natural environment, food, radiation, the workplace, etc. Geologic factors range from geographic location to radiation and specific minerals. The report, however, is based on an inadequate data base in most instances, and its major recommendations are related to the establishment of a national cancer registry to record cancer statistics, as is done for many other diseases. Presently, hard statistics are lacking in the establishment of some association between the cause-effect relationship of most environmental factors and most carcinogens. Of particular interest, but unfortunately based on unreliable data, are the effects of mineral substances such as ‘asbestos.’ USGS mineralogist Malcolm Ross will review asbestos and its effects on human health in the forthcoming Mineralogical Society of America's Short Course on the Amphiboles (Reviews in Mineralogy, 9, in press, 1981).

Unmanned aerial vehicles in construction and worker safety.

PubMed

Howard, John; Murashov, Vladimir; Branche, Christine M

2018-01-01

Applications of unmanned aerial vehicles (UAVs) for military, recreational, public, and commercial uses have expanded significantly in recent years. In the construction industry, UAVs are used primarily for monitoring of construction workflow and job site logistics, inspecting construction sites to assess structural integrity, and for maintenance assessments. As is the case with other emerging technologies, occupational safety assessments of UAVs lag behind technological advancements. UAVs may create new workplace hazards that need to be evaluated and managed to ensure their safe operation around human workers. At the same time, UAVs can perform dangerous tasks, thereby improving workplace safety. This paper describes the four major uses of UAVs, including their use in construction, the potential risks of their use to workers, approaches for risk mitigation, and the important role that safety and health professionals can play in ensuring safe approaches to the their use in the workplace. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

The power of disruptive technological innovation: Transcatheter aortic valve implantation.

PubMed

Berlin, David B; Davidson, Michael J; Schoen, Frederick J

2015-11-01

We sought to evaluate the principles of disruptive innovation, defined as technology innovation that fundamentally shifts performance and utility metrics, as applied to transcatheter aortic valve implantation (TAVI). In particular, we considered implantation procedure, device design, cost, and patient population. Generally cheaper and lower performing, classical disruptive innovations are first commercialized in insignificant markets, promise lower margins, and often parasitize existing usage, representing unattractive investments for established market participants. However, despite presently high unit cost, TAVI is less invasive, treats a "new," generally high risk, patient population, and is generally done by a multidisciplinary integrated heart team. Moreover, at least in the short-term TAVI has not been lower-performing than open surgical aortic valve replacement in high-risk patients. We conclude that TAVI extends the paradigm of disruptive innovation and represents an attractive commercial opportunity space. Moreover, should the long-term performance and durability of TAVI approach that of conventional prostheses, TAVI will be an increasingly attractive commercial opportunity. © 2014 Wiley Periodicals, Inc.

Implementing an innovated preservation technology: The American Society of Transplant Surgeons' (ASTS) Standards Committee White Paper on Ex Situ Liver Machine Perfusion.

PubMed

Quintini, Cristiano; Martins, Paulo N; Shah, Shimul; Killackey, Mary; Reed, Alan; Guarrera, James; Axelrod, David A

2018-05-23

The pervasive shortage of deceased donor liver allografts contributes to significant waitlist mortality despite efforts to increase organ donation. Ex vivo liver perfusion appears to enhance preservation of donor organs, extending viability and potentially evaluating function in organs previously considered too high risk for transplant. These devices pose novel challenges for organ allocation, safety, training, and finances. This white paper describes the American Society of Transplant Surgeons' belief that organ preservation technology is a vital advance, but its use should not change fundamental aspects of organ allocation. Additional data elements need to be collected, made available for organ assessment by transplant professionals to allow determination of organ suitability in the case of reallocation and incorporated into risk adjustment methodology. Finally, further work is needed to determine the optimal strategy for management and oversight of perfused organs prior to transplantation. © 2018 The American Society of Transplantation and the American Society of Transplant Surgeons.

Fecal Microbiota Therapy for Clostridium difficile Infection: A Health Technology Assessment.

PubMed

2016-01-01

Fecal microbiota therapy is increasingly being used to treat patients with Clostridium difficile infection. This health technology assessment primarily evaluated the effectiveness and cost-effectiveness of fecal microbiota therapy compared with the usual treatment (antibiotic therapy). We performed a literature search using Ovid MEDLINE, Embase, Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, CRD Health Technology Assessment Database, Cochrane Central Register of Controlled Trials, and NHS Economic Evaluation Database. For the economic review, we applied economic filters to these search results. We also searched the websites of agencies for other health technology assessments. We conducted a meta-analysis to analyze effectiveness. The quality of the body of evidence for each outcome was examined according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. Using a step-wise, structural methodology, we determined the overall quality to be high, moderate, low, or very low. We used a survey to examine physicians' perception of patients' lived experience, and a modified grounded theory method to analyze information from the survey. For the review of clinical effectiveness, 16 of 1,173 citations met the inclusion criteria. A meta-analysis of two randomized controlled trials found that fecal microbiota therapy significantly improved diarrhea associated with recurrent C. difficile infection versus treatment with vancomycin (relative risk 3.24, 95% confidence interval [CI] 1.85-5.68) (GRADE: moderate). While fecal microbiota therapy is not associated with a significant decrease in mortality compared with antibiotic therapy (relative risk 0.69, 95% CI 0.14-3.39) (GRADE: low), it is associated with a significant increase in adverse events (e.g., short-term diarrhea, relative risk 30.76, 95% CI 4.46-212.44; abdominal cramping, relative risk 14.81, 95% CI 2.07-105.97) (GRADE: low). For the value-for-money component, two of 151 economic evaluations met the inclusion criteria. One reported that fecal microbiota therapy was dominant (more effective and less expensive) compared with vancomycin; the other reported an incremental cost-effectiveness ratio of $17,016 USD per quality-adjusted life-year for fecal microbiota therapy compared with vancomycin. This ratio for the second study indicated that there would be additional cost associated with each recurrent C. difficile infection resolved. In Ontario, if fecal microbiota therapy were adopted to treat recurrent C. difficile infection, considering it from the perspective of the Ministry of Health and Long-Term Care as the payer, an estimated $1.5 million would be saved after the first year of adoption and $2.9 million after 3 years. The contradiction between the second economic evaluation and the savings we estimated may be a result of the lower cost of fecal microbiota therapy and hospitalization in Ontario compared with the cost of therapy used in the US model. Physicians reported that C. difficile infection significantly reduced patients' quality of life. Physicians saw fecal microbiota therapy as improving patients' quality of life because patients could resume daily activities. Physicians reported that their patients were happy with the procedures required to receive fecal microbiota therapy. In patients with recurrent C. difficile infection, fecal microbiota therapy improves outcomes that are important to patients and provides good value for money.

Fecal Microbiota Therapy for Clostridium difficile Infection: A Health Technology Assessment

PubMed Central

2016-01-01

Background Fecal microbiota therapy is increasingly being used to treat patients with Clostridium difficile infection. This health technology assessment primarily evaluated the effectiveness and cost-effectiveness of fecal microbiota therapy compared with the usual treatment (antibiotic therapy). Methods We performed a literature search using Ovid MEDLINE, Embase, Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, CRD Health Technology Assessment Database, Cochrane Central Register of Controlled Trials, and NHS Economic Evaluation Database. For the economic review, we applied economic filters to these search results. We also searched the websites of agencies for other health technology assessments. We conducted a meta-analysis to analyze effectiveness. The quality of the body of evidence for each outcome was examined according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. Using a step-wise, structural methodology, we determined the overall quality to be high, moderate, low, or very low. We used a survey to examine physicians’ perception of patients’ lived experience, and a modified grounded theory method to analyze information from the survey. Results For the review of clinical effectiveness, 16 of 1,173 citations met the inclusion criteria. A meta-analysis of two randomized controlled trials found that fecal microbiota therapy significantly improved diarrhea associated with recurrent C. difficile infection versus treatment with vancomycin (relative risk 3.24, 95% confidence interval [CI] 1.85–5.68) (GRADE: moderate). While fecal microbiota therapy is not associated with a significant decrease in mortality compared with antibiotic therapy (relative risk 0.69, 95% CI 0.14–3.39) (GRADE: low), it is associated with a significant increase in adverse events (e.g., short-term diarrhea, relative risk 30.76, 95% CI 4.46–212.44; abdominal cramping, relative risk 14.81, 95% CI 2.07–105.97) (GRADE: low). For the value-for-money component, two of 151 economic evaluations met the inclusion criteria. One reported that fecal microbiota therapy was dominant (more effective and less expensive) compared with vancomycin; the other reported an incremental cost-effectiveness ratio of $17,016 USD per quality-adjusted life-year for fecal microbiota therapy compared with vancomycin. This ratio for the second study indicated that there would be additional cost associated with each recurrent C. difficile infection resolved. In Ontario, if fecal microbiota therapy were adopted to treat recurrent C. difficile infection, considering it from the perspective of the Ministry of Health and Long-Term Care as the payer, an estimated $1.5 million would be saved after the first year of adoption and $2.9 million after 3 years. The contradiction between the second economic evaluation and the savings we estimated may be a result of the lower cost of fecal microbiota therapy and hospitalization in Ontario compared with the cost of therapy used in the US model. Physicians reported that C. difficile infection significantly reduced patients’ quality of life. Physicians saw fecal microbiota therapy as improving patients’ quality of life because patients could resume daily activities. Physicians reported that their patients were happy with the procedures required to receive fecal microbiota therapy. Conclusions In patients with recurrent C. difficile infection, fecal microbiota therapy improves outcomes that are important to patients and provides good value for money. PMID:27516814

Learning and mastery behaviours as risk factors to abandonment in a paediatric user of advanced single-switch access technology.

PubMed

Brian, Leung; Jessica A, Brian; Tom, Chau

2013-09-01

The present descriptive case study documents the behaviours of a child single-switch user in the community setting and draws attention to learning and mastery behaviours as risk factors to single-switch abandonment. Our observations were interpreted in the context of a longer term school-based evaluation of an advanced single-switch access technology with a nine year-old user with severe spastic quadriplegic cerebral palsy. The child completed 25 experiment sessions averaging a rate of three sessions every two weeks. During each session he worked on several blocks of single-switch computer activity using his vocal cord vibration switch. Despite high levels of single-switch sensitivity and specificity that suggested a good fit between the participant and the technology, the participant perceived a lower proficiency level of his own abilities, demonstrated impatience and intolerance to interaction errors, and was apprehensive of making mistakes when using his switch in public. The benefit of gaining some degree of independent physical access might not necessarily enhance resilience to interaction errors or bouts of poor task performance. On the other hand, the participant's behaviours were consistent with those of a typically developing child learning or mastering any new skill or task. Implications for Rehabilitation The attitude and behaviour of a paediatric switch user towards skill development can be risk factors to abandonment of an access technology, despite successful clinical trial with the device. Children with severe disabilities can be associated with the same types of skill development behaviour patterns and achievement motivation as their typically developing peers. Empirical observations of the case participant's switch use behaviours suggest that user training could be adaptive in order to account for individual differences in skill development and achievement motivation.

Application of a risk analysis method to different technologies for producing a monoclonal antibody employed in hepatitis B vaccine manufacturing.

PubMed

Milá, Lorely; Valdés, Rodolfo; Tamayo, Andrés; Padilla, Sigifredo; Ferro, Williams

2012-03-01

CB.Hep-1 monoclonal antibody (mAb) is used for a recombinant Hepatitis B vaccine manufacturing, which is included in a worldwide vaccination program against Hepatitis B disease. The use of this mAb as immunoligand has been addressed into one of the most efficient steps of active pharmaceutical ingredient purification process. Regarding this, Quality Risk Management (QRM) provides an excellent framework for the risk management use in pharmaceutical manufacturing and quality decision-making applications. Consequently, this study sought applying a prospective risk analysis methodology Failure Mode Effects Analysis (FMEA) as QRM tool for analyzing different CB.Hep-1 mAb manufacturing technologies. As main conclusions FMEA was successfully used to assess risks associated with potential problems in CB.Hep-1 mAb manufacturing processes. The severity and occurrence of risks analysis evidenced that the percentage of very high severe risks ranged 31.0-38.7% of all risks and the huge majority of risks have a very low occurrence level (61.9-83.3%) in all assessed technologies. Finally, additive Risk Priority Number, was descending ordered as follow: transgenic plants (2636), ascites (2577), transgenic animals (2046) and hollow fiber bioreactors (1654), which also corroborated that in vitro technology, should be the technology of choice for CB.Hep-1 mAb manufacturing in terms of risks and mAb molecule quality. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

Are privacy-enhancing technologies for genomic data ready for the clinic? A survey of medical experts of the Swiss HIV Cohort Study.

PubMed

Raisaro, Jean-Louis; McLaren, Paul J; Fellay, Jacques; Cavassini, Matthias; Klersy, Catherine; Hubaux, Jean-Pierre

2018-03-01

Protecting patient privacy is a major obstacle for the implementation of genomic-based medicine. Emerging privacy-enhancing technologies can become key enablers for managing sensitive genetic data. We studied physicians' attitude toward this kind of technology in order to derive insights that might foster their future adoption for clinical care. We conducted a questionnaire-based survey among 55 physicians of the Swiss HIV Cohort Study who tested the first implementation of a privacy-preserving model for delivering genomic test results. We evaluated their feedback on three different aspects of our model: clinical utility, ability to address privacy concerns and system usability. 38/55 (69%) physicians participated in the study. Two thirds of them acknowledged genetic privacy as a key aspect that needs to be protected to help building patient trust and deploy new-generation medical information systems. All of them successfully used the tool for evaluating their patients' pharmacogenomics risk and 90% were happy with the user experience and the efficiency of the tool. Only 8% of physicians were unsatisfied with the level of information and wanted to have access to the patient's actual DNA sequence. This survey, although limited in size, represents the first evaluation of privacy-preserving models for genomic-based medicine. It has allowed us to derive unique insights that will improve the design of these new systems in the future. In particular, we have observed that a clinical information system that uses homomorphic encryption to provide clinicians with risk information based on sensitive genetic test results can offer information that clinicians feel sufficient for their needs and appropriately respectful of patients' privacy. The ability of this kind of systems to ensure strong security and privacy guarantees and to provide some analytics on encrypted data has been assessed as a key enabler for the management of sensitive medical information in the near future. Providing clinically relevant information to physicians while protecting patients' privacy in order to comply with regulations is crucial for the widespread use of these new technologies. Copyright © 2017. Published by Elsevier Inc.

Performance and economic risk evaluation of dispersed solar thermal power systems by Monte Carlo simulation

NASA Technical Reports Server (NTRS)

Manvi, R.; Fujita, T.

1978-01-01

A preliminary comparative evaluation of dispersed solar thermal power plants utilizing advanced technologies available in 1985-2000 time frame is under way at JPL. The solar power plants of 50 KWe to 10 MWe size are equipped with two axis tracking parabolic dish concentrator systems operating at temperatures in excess of 1000 F. The energy conversion schemes under consideration include advanced steam, open and closed cycle gas turbines, stirling, and combined cycle. The energy storage systems include advanced batteries, liquid metal, and chemical. This paper outlines a simple methodology for a probabilistic assessment of such systems. Sources of uncertainty in the development of advanced systems are identified, and a computer Monte Carlo simulation is exercised to permit an analysis of the tradeoffs of the risk of failure versus the potential for large gains. Frequency distribution of energy cost for several alternatives are presented.

Implications of climate change mitigation for sustainable development

NASA Astrophysics Data System (ADS)

Jakob, Michael; Steckel, Jan Christoph

2016-10-01

Evaluating the trade-offs between the risks related to climate change, climate change mitigation as well as co-benefits requires an integrated scenarios approach to sustainable development. We outline a conceptual multi-objective framework to assess climate policies that takes into account climate impacts, mitigation costs, water and food availability, technological risks of nuclear energy and carbon capture and sequestration as well as co-benefits of reducing local air pollution and increasing energy security. This framework is then employed as an example to different climate change mitigation scenarios generated with integrated assessment models. Even though some scenarios encompass considerable challenges for sustainability, no scenario performs better or worse than others in all dimensions, pointing to trade-offs between different dimensions of sustainable development. For this reason, we argue that these trade-offs need to be evaluated in a process of public deliberation that includes all relevant social actors.

Human Research Program: Space Human Factors and Habitability Element

NASA Technical Reports Server (NTRS)

Russo, Dane M.

2007-01-01

The three project areas of the Space Human Factors and Habitability Element work together to achieve a working and living environment that will keep crews healthy, safe, and productive throughout all missions -- from Earth orbit to Mars expeditions. The Advanced Environmental Health (AEH) Project develops and evaluates advanced habitability systems and establishes requirements and health standards for exploration missions. The Space Human Factors Engineering (SHFE) Project s goal is to ensure a safe and productive environment for humans in space. With missions using new technologies at an ever-increasing rate, it is imperative that these advances enhance crew performance without increasing stress or risk. The ultimate goal of Advanced Food Technology (AFT) Project is to develop and deliver technologies for human centered spacecraft that will support crews on missions to the moon, Mars, and beyond.

Systematic assessment of laser safety in otolaryngology

NASA Astrophysics Data System (ADS)

Oswal, V. H.

2001-01-01

Risk management of lasers can be broadly define das a process of identification of the risk, assessment of the risk and steps taken to avert the risk. The risk management may be divided into: Risk inherent to the technology and risk in clinical use. Within the National Health Service in the UK, a useful document, which provides hospital laser users with advice on safety, is the 'Guidance on the Safe Use of Lasers in Medical and Dental Practice' issued by the Medical Devices Agency for the Department of Health in the UK. It recommends the appointment of a Laser Protection Adviser (LPA) who is knowledgeable in the evaluation of laser hazards. One of the duties LPA is to ensure that Local Rules are drawn up for each specific application of a laser. A Laser Protection Supervisor (LPS) should also be appointed with responsibility to ensure that the Local Rules are observed. It is a sensible precaution that laser users should be those approved by the Laser Protection Supervisor in consultation with the Laser Protection Advisor. All laser users should sign a statement that they have read and understood the Local Rules.

A Simplified Approach to Risk Assessment Based on System Dynamics: An Industrial Case Study.

PubMed

Garbolino, Emmanuel; Chery, Jean-Pierre; Guarnieri, Franck

2016-01-01

Seveso plants are complex sociotechnical systems, which makes it appropriate to support any risk assessment with a model of the system. However, more often than not, this step is only partially addressed, simplified, or avoided in safety reports. At the same time, investigations have shown that the complexity of industrial systems is frequently a factor in accidents, due to interactions between their technical, human, and organizational dimensions. In order to handle both this complexity and changes in the system over time, this article proposes an original and simplified qualitative risk evaluation method based on the system dynamics theory developed by Forrester in the early 1960s. The methodology supports the development of a dynamic risk assessment framework dedicated to industrial activities. It consists of 10 complementary steps grouped into two main activities: system dynamics modeling of the sociotechnical system and risk analysis. This system dynamics risk analysis is applied to a case study of a chemical plant and provides a way to assess the technological and organizational components of safety. © 2016 Society for Risk Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, R.A.

Many emerging remediation technologies are designed to remove contaminant mass from source zones at DNAPL sites in response to regulatory requirements. There is often concern in the regulated community as to whether mass removal actually reduces risk, or whether the small risk reductions achieved warrant the large costs incurred. This paper sets out a framework for quantifying the degree to which risk is reduced as mass is removed from shallow, saturated, low-permeability, dual-porosity, DNAPL source zones. Risk is defined in terms of meeting an alternate concentration level (ACL) at a compliance well in an aquifer underlying the source zone. Themore » ACL is back-calculated from a carcinogenic health-risk characterization at a downstream water-supply well. Source-zone mass-removal efficiencies are heavily dependent on the distribution of mass between media (fractures, matrix) and phases (dissolved, sorbed, free product). Due to the uncertainties in currently-available technology performance data, the scope of the paper is limited to developing a framework for generic technologies rather than making risk-reduction calculations for specific technologies. Despite the qualitative nature of the exercise, results imply that very high mass-removal efficiencies are required to achieve significant long-term risk reduction with technology, applications of finite duration. 17 refs., 7 figs., 6 tabs.« less

Are people with chronic diseases interested in using telehealth? A cross-sectional postal survey.

PubMed

Edwards, Louisa; Thomas, Clare; Gregory, Alison; Yardley, Lucy; O'Cathain, Alicia; Montgomery, Alan A; Salisbury, Chris

2014-05-08

There is growing interest in telehealth-the use of technology to support the remote delivery of health care and promote self-management-as a potential alternative to face-to-face care for patients with chronic diseases. However, little is known about what precipitates interest in the use of telehealth among these patients. This survey forms part of a research program to develop and evaluate a telehealth intervention for patients with two exemplar chronic diseases: depression and raised cardiovascular disease (CVD) risk. The survey was designed to explore the key factors that influence interest in using telehealth in these patient groups. Thirty-four general practices were recruited from two different regions within England. Practice records were searched for patients with (1) depression (aged 18+ years) or (2) 10-year risk of CVD ≥20% and at least one modifiable risk factor (aged 40-74 years). Within each general practice, 54 patients in each chronic disease group were randomly selected to receive a postal questionnaire. Questions assessed five key constructs: sociodemographics, health needs, difficulties accessing health care, technology-related factors (availability, confidence using technology, perceived benefits and drawbacks of telehealth), and satisfaction with prior use of telehealth. Respondents also rated their interest in using different technologies for telehealth (phone, email and Internet, or social media). Relationships between the key constructs and interest in using the three mediums of telehealth were examined using multivariable regression models. Of the 3329 patients who were sent a study questionnaire, 44.40% completed it (872/1740, 50.11% CVD risk; 606/1589, 38.14% depression). Overall, there was moderate interest in using phone-based (854/1423, 60.01%) and email/Internet-based (816/1425, 57.26%) telehealth, but very little interest in social media (243/1430, 16.99%). After adjusting for health needs, access difficulties, technology-related factors, and prior use of telehealth, interest in telehealth had largely no association with sociodemographic variables. For both patient groups and for each of the three technology mediums, the most important constructs related to interest in telehealth were having the confidence to use the associated technology, as well as perceiving greater advantages and fewer disadvantages from using telehealth. To illustrate, greater confidence using phone technologies (b=.16, 95% CI 0.002-0.33), while also perceiving more benefits (b=.31, 95% CI 0.21-0.40) and fewer drawbacks (b=-.23, 95% CI -0.28 to -0.17) to using telehealth were associated with more interest in using phone-based telehealth technologies for patients with depression. There is widespread interest in using phone-based and email/Internet-based telehealth among patients with chronic diseases, regardless of their health status, access difficulties, age, or many other sociodemographic factors. This interest could be increased by helping patients gain confidence using technologies and through highlighting benefits and addressing concerns about telehealth. While the same pattern exists for social media telehealth, interest in using these technologies is minimal.

Multivariate analysis of factors affecting probability of pregnancy and live birth with in vitro fertilization: an analysis of the Society for Assisted Reproductive Technology Clinic Outcomes Reporting System.

PubMed

Baker, Valerie L; Luke, Barbara; Brown, Morton B; Alvero, Ruben; Frattarelli, John L; Usadi, Rebecca; Grainger, David A; Armstrong, Alicia Y

2010-09-01

To evaluate factors predictive of clinical pregnancy and of pregnancy loss from assisted reproductive technology (ART) using data from the Society for Assisted Reproductive Technology database for 2004-2006. Retrospective cohort. Clinic-based data. The study population included 225,889 fresh embryo transfer cycles using autologous oocytes and partner semen. None. Clinical intrauterine gestation (presence of gestational sac) and live birth (>or=22 weeks gestation and >or=300 g birth weight). Increasing maternal age was significantly associated with a reduced odds of conception and increased fetal loss until 19 weeks gestation, but not with later pregnancy loss. Intracytoplasmic sperm injection (ICSI), assisted hatching, and increasing number of embryos transferred had significant positive effects on the odds of conception and pregnancy continuation through the first trimester, but did not affect the risk of later loss. Blacks, Asians, and Hispanics had significantly lower odds of clinical pregnancy compared with whites. Also compared with whites, Hispanics and Asians had a significantly greater risk of pregnancy loss in the second and third trimesters, and blacks had a significantly greater risk of pregnancy loss in all trimesters. Certain demographic and ART treatment parameters influenced chance of conception and early pregnancy loss, whereas black race and Hispanic ethnicity were also significantly associated with late pregnancy loss in ART-conceived pregnancies. Copyright (c) 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Research on Life Science and Life Support Engineering Problems of Manned Deep Space Exploration Mission

NASA Astrophysics Data System (ADS)

Qi, Bin; Guo, Linli; Zhang, Zhixian

2016-07-01

Space life science and life support engineering are prominent problems in manned deep space exploration mission. Some typical problems are discussed in this paper, including long-term life support problem, physiological effect and defense of varying extraterrestrial environment. The causes of these problems are developed for these problems. To solve these problems, research on space life science and space medical-engineering should be conducted. In the aspect of space life science, the study of space gravity biology should focus on character of physiological effect in long term zero gravity, co-regulation of physiological systems, impact on stem cells in space, etc. The study of space radiation biology should focus on target effect and non-target effect of radiation, carcinogenicity of radiation, spread of radiation damage in life system, etc. The study of basic biology of space life support system should focus on theoretical basis and simulating mode of constructing the life support system, filtration and combination of species, regulation and optimization method of life support system, etc. In the aspect of space medical-engineering, the study of bio-regenerative life support technology should focus on plants cultivation technology, animal-protein production technology, waste treatment technology, etc. The study of varying gravity defense technology should focus on biological and medical measures to defend varying gravity effect, generation and evaluation of artificial gravity, etc. The study of extraterrestrial environment defense technology should focus on risk evaluation of radiation, monitoring and defending of radiation, compound prevention and removal technology of dust, etc. At last, a case of manned lunar base is analyzed, in which the effective schemes of life support system, defense of varying gravity, defense of extraterrestrial environment are advanced respectively. The points in this paper can be used as references for intensive study on key technologies.

Being everything to anyone: Applicability of thermoacoustic technology in the commercial refrigeration market

NASA Astrophysics Data System (ADS)

Poese, Matthew E.; Smith, Robert W. M.; Garrett, Steven L.

2005-09-01

This talk will compare electrodynamically driven thermoacoustic refrigeration technology to some common implementations of low-lift vapor-compression technology. A rudimentary explanation of vapor-compression refrigeration will be presented along with some of the implementation problems faced by refrigeration engineers using compressor-based systems. These problems include oil management, compressor slugging, refrigerant leaks and the environmental impact of refrigerants. Recently, the method of evaluating this environmental impact has been codified to include the direct effects of the refrigerants on global warming as well as the so-called ``indirect'' warming impact of the carbon dioxide released during the generation (at the power plant) of the electrical power consumed by the refrigeration equipment. It is issues like these that generate commercial interest in an alternative refrigeration technology. However, the requirements of a candidate technology for adoption in a mature and risk-averse commercial refrigeration industry are as hard to divine as they are to meet. Also mentioned will be the state of other alternative refrigeration technologies like free-piston Stirling, thermoelectric and magnetocaloric as well as progress using vapor compression technology with alternative refrigerants like hydrocarbons and carbon dioxide.

Current and future needs for developmental toxicity testing.

PubMed

Makris, Susan L; Kim, James H; Ellis, Amy; Faber, Willem; Harrouk, Wafa; Lewis, Joseph M; Paule, Merle G; Seed, Jennifer; Tassinari, Melissa; Tyl, Rochelle

2011-10-01

A review is presented of the use of developmental toxicity testing in the United States and international regulatory assessment of human health risks associated with exposures to pharmaceuticals (human and veterinary), chemicals (agricultural, industrial, and environmental), food additives, cosmetics, and consumer products. Developmental toxicology data are used for prioritization and screening of pharmaceuticals and chemicals, for evaluating and labeling of pharmaceuticals, and for characterizing hazards and risk of exposures to industrial and environmental chemicals. The in vivo study designs utilized in hazard characterization and dose-response assessment for developmental outcomes have not changed substantially over the past 30 years and have served the process well. Now there are opportunities to incorporate new technologies and approaches to testing into the existing assessment paradigm, or to apply innovative approaches to various aspects of risk assessment. Developmental toxicology testing can be enhanced by the refinement or replacement of traditional in vivo protocols, including through the use of in vitro assays, studies conducted in alternative nonmammalian species, the application of new technologies, and the use of in silico models. Potential benefits to the current regulatory process include the ability to screen large numbers of chemicals quickly, with the commitment of fewer resources than traditional toxicology studies, and to refine the risk assessment process through an enhanced understanding of the mechanisms of developmental toxicity and their relevance to potential human risk. As the testing paradigm evolves, the ability to use developmental toxicology data to meet diverse critical regulatory needs must be retained. © 2011 Wiley Periodicals, Inc.

Genetically modified crops: success, safety assessment, and public concern.

PubMed

Singh, Om V; Ghai, Shivani; Paul, Debarati; Jain, Rakesh K

2006-08-01

With the emergence of transgenic technologies, new ways to improve the agronomic performance of crops for food, feed, and processing applications have been devised. In addition, ability to express foreign genes using transgenic technologies has opened up options for producing large quantities of commercially important industrial or pharmaceutical products in plants. Despite this high adoption rate and future promises, there is a multitude of concerns about the impact of genetically modified (GM) crops on the environment. Potential contamination of the environment and food chains has prompted detailed consideration of how such crops and the molecules that they produce can be effectively isolated and contained. One of the reasonable steps after creating a transgenic plant is to evaluate its potential benefits and risks to the environment and these should be compared to those generated by traditional agricultural practices. The precautionary approach in risk management of GM plants may make it necessary to monitor significant wild and weed populations that might be affected by transgene escape. Effective risk assessment and monitoring mechanisms are the basic prerequisites of any legal framework to adequately address the risks and watch out for new risks. Several agencies in different countries monitor the release of GM organisms or frame guidelines for the appropriate application of recombinant organisms in agro-industries so as to assure the safe use of recombinant organisms and to achieve sound overall development. We feel that it is important to establish an internationally harmonized framework for the safe handling of recombinant DNA organisms within a few years.

Ethical arguments relevant to the use of GM crops.

PubMed

Weale, Albert

2010-11-30

The Nuffield Council on Bioethics (NCOB) has published two reports (1999 and 2004) on the social and ethical issues involved in the use of genetically modified crops. This presentation summarises their core ethical arguments. Five sets of ethical concerns have been raised about GM crops: potential harm to human health; potential damage to the environment; negative impact on traditional farming practice; excessive corporate dominance; and the 'unnaturalness' of the technology. The NCOB examined these claims in the light of the principle of general human welfare, the maintenance of human rights and the principle of justice. It concluded in relation to the issue of 'unnaturalness' that GM modification did not differ to such an extent from conventional breeding that it is in itself morally objectionable. In making an assessment of possible costs, benefits and risks, it was necessary to proceed on a case-by-case basis. However, the potential to bring about significant benefits in developing countries (improved nutrition, enhanced pest resistance, increased yields and new products) meant that there was an ethical obligation to explore these potential benefits responsibly, to contribute to the reduction of poverty, and improve food security and profitable agriculture in developing countries. NCOB held that these conclusions were consistent with any practical precautionary approach. In particular, in applying a precautionary approach the risks associated with the status quo need to be considered, as well as any risks inherent in the technology. These ethical requirements have implications for the governance of the technology, in particular mechanisms for enabling small-scale farmers to express their preferences for traits selected by plant breeders and mechanisms for the diffusion of risk-based evaluations. Copyright © 2010 Elsevier B.V. All rights reserved.

Leakage Risk Assessment for a Potential CO2 Storage Project in Saskatchewan, Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houseworth, J.E.; Oldenburg, C.M.; Mazzoldi, A.

2011-05-01

A CO{sub 2} sequestration project is being considered to (1) capture CO{sub 2} emissions from the Consumers Cooperative Refineries Limited at Regina, Saskatchewan and (2) geologically sequester the captured CO{sub 2} locally in a deep saline aquifer. This project is a collaboration of several industrial and governmental organizations, including the Petroleum Technology Research Centre (PTRC), Sustainable Development Technology Canada (SDTC), SaskEnvironment Go Green Fund, SaskPower, CCRL, Schlumberger Carbon Services, and Enbridge. The project objective is to sequester 600 tonnes CO{sub 2}/day. Injection is planned to start in 2012 or 2013 for a period of 25 years for a total storagemore » of approximately 5.5 million tonnes CO{sub 2}. This report presents an assessment of the leakage risk of the proposed project using a methodology known as the Certification Framework (CF). The CF is used for evaluating CO{sub 2} leakage risk associated with geologic carbon sequestration (GCS), as well as brine leakage risk owing to displacement and pressurization of brine by the injected CO{sub 2}. We follow the CF methodology by defining the entities (so-called Compartments) that could be impacted by CO{sub 2} leakage, the CO{sub 2} storage region, the potential for leakage along well and fault pathways, and the consequences of such leakage. An understanding of the likelihood and consequences of leakage forms the basis for understanding CO{sub 2} leakage risk, and forms the basis for recommendations of additional data collection and analysis to increase confidence in the risk assessment.« less

Risk based In Vitro Performance Assessment of Extended Release Abuse Deterrent Formulations

PubMed Central

Xu, Xiaoming; Gupta, Abhay; Al-Ghabeish, Manar; Calderon, Silvia N.; Khan, Mansoor A.

2016-01-01

High strength extended release opioid products, which are indispensable tools in the management of pain, are associated with serious risks of unintentional and potentially fatal overdose, as well as of misuse and abuse that might lead to addiction. The issue of drug abuse becomes increasingly prominent when the dosage forms can be readily manipulated to release a high amount of opioid or to extract the drug in certain products or solvents. One approach to deter opioid drug abuse is by providing novel abuse deterrent formulations (ADF), with properties that may be viewed as barriers to abuse of the product. However, unlike regular extended release formulations, assessment of ADF technologies are challenging, in part due to the great variety of formulation designs available to achieve deterrence of abuse by oral, parenteral, nasal and respiratory routes. With limited prior history or literature information, and lack of compendial standards, evaluation and regulatory approval of these novel drug products become increasingly difficult. The present article describes a risk-based standardized in-vitro approach that can be utilized in general evaluation of abuse deterrent features for all ADF products. PMID:26784976

A Rapid Public Health Needs Assessment Framework for after Major Earthquakes Using High-Resolution Satellite Imagery.

PubMed

Zhao, Jian; Ding, Fan; Wang, Zhe; Ren, Jinghuan; Zhao, Jing; Wang, Yeping; Tang, Xuefeng; Wang, Yong; Yao, Jianyi; Li, Qun

2018-05-30

Background : Earthquakes causing significant damage have occurred frequently in China, producing enormous health losses, damage to the environment and public health issues. Timely public health response is crucial to reduce mortality and morbidity and promote overall effectiveness of rescue efforts after a major earthquake. Methods : A rapid assessment framework was established based on GIS technology and high-resolution remote sensing images. A two-step casualties and injures estimation method was developed to evaluate health loss with great rapidity. Historical data and health resources information was reviewed to evaluate the damage condition of medical resources and public health issues. Results : The casualties and injures are estimated within a few hours after an earthquake. For the Wenchuan earthquake, which killed about 96,000 people and injured about 288,000, the estimation accuracy is about 77%. 242/294 (82.3%) of the medical existing institutions were severely damaged. About 40,000 tons of safe drinking water was needed every day to ensure basic living needs. The risk of water-borne and foodborne disease, respiratory and close contact transmission disease is high. For natural foci diseases, the high-risk area of schistosomiasis was mapped in Lushan County as an example. Finally, temporary settlements for victims of earthquake were mapped. Conclusions : High resolution Earth observation technology can provide a scientific basis for public health emergency management in the major disasters field, which will be of great significance in helping policy makers effectively improve health service ability and public health emergency management in prevention and control of infectious diseases and risk assessment.

Quality transitivity and traceability system of herbal medicine products based on quality markers.

PubMed

Liu, Changxiao; Guo, De-An; Liu, Liang

2018-05-15

Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products. To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products. Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed. Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control. The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain. The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production. Copyright © 2018 Elsevier GmbH. All rights reserved.

Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W; Laird, Daniel; Costello, Ronan

This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

Tracing Impacts of Science and Technology Development

NASA Astrophysics Data System (ADS)

Powell, Jeanne

2003-03-01

ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for commercialization and diffusion. ATP has contracted a number of in-depth case studies of individual projects and groups of related projects. Given that the full timeline for economic impact extends many years after ATP funding ends, some studies are prospective, and others are retrospective. Some are a mix of the two. Quantitative economic impacts from just a few or the projects funded to date provide strong evidence that the ATP is addressing its ultimate goal of broad economic benefits to the nation and generating value that vastly exceeds the cost of the program to date.

Advanced Gas Turbine (AGT) powertrain system development for automotive applications report

NASA Technical Reports Server (NTRS)

1984-01-01

This report describes progress and work performed during January through June 1984 to develop technology for an Advanced Gas Turbine (AGT) engine for automotive applications. Work performed during the first eight periods initiated design and analysis, ceramic development, component testing, and test bed evaluation. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System Program. This program is oriented at providing the United States automotive industry the high-risk long-range techology necessary to produce gas turbine engines for automobiles with reduced fuel consumption and reduced environmental impact. Technology resulting from this program is intended to reach the marketplace by the early 1990s.

Do "clicker" educational sessions enhance the effectiveness of a social norms marketing campaign?

PubMed

Killos, Lydia F; Hancock, Linda C; Wattenmaker McGann, Amanda; Keller, Adrienne E

2010-01-01

social norms campaigns are a cost-effective way to reduce high-risk drinking on college campuses. This study compares effectiveness of a "standard" social norms media (SNM) campaign for those with and without exposure to additional educational sessions using audience response technology ("clickers"). American College Health Association's National College Health Assessment questions are used to evaluate actual and perceived use. Additional survey questions assess individual exposure to the interventions. the authors find "clicker" technology to be more effective than social norms poster media alone in reducing misperceptions of normative alcohol use for those students who attended clicker sessions. poster SNM campaigns may be most effective when supported by group "clicker" heath-related sessions.

Challenges to oil spill assessment for seabirds in the deep ocean

USGS Publications Warehouse

Haney, J. Christopher; Jodice, Patrick G. R.; Montevecchi, William; Evers, David C.

2017-01-01

We synthesize impediments for evaluating effects to seabirds from open ocean hydrocarbon releases. Effects on seabirds from ship discharges, spills, and well blowouts often are poorly detected and monitored far from land. Regulatory regimes for ocean spills can result in monitoring efforts that are not entirely transparent. We illustrate how interdisciplinary technologies address deficits that hamper individual or population level assessments for seabirds, and we demonstrate where emerging technologies might be engaged to bridge gaps in oil spill monitoring. Although acute mortality from direct oil exposure poses the greatest risk to seabirds, other hazards from light-attraction, flaring, collisions, chronic pollution, and hydrocarbon inhalation around oil infrastructure also may induce bird mortality in the deep ocean.

Technology and At-Risk Young Readers and Their Classrooms

ERIC Educational Resources Information Center

Blachowicz, Camille L. Z.; Bates, Ann; Berne, Jennifer; Bridgman, Teresa; Chaney, Jeanne; Perney, Jan

2009-01-01

This study examined the ways in which 18 first-grade teachers and their students in 11 high-risk urban schools began to use literacy-focused technology. The goal of the study was to observe the technology in use by the students, to observe the classroom dynamics and teachers' instructional choices centered around technology use, to look at student…

The TURis System for Transurethral Resection of the Prostate: A NICE Medical Technology Guidance.

PubMed

Cleves, Andrew; Dimmock, Paul; Hewitt, Neil; Carolan-Rees, Grace

2016-06-01

The transurethral resection in saline (TURis) system was notified by the company Olympus Medical to the National Institute of Health and Care Excellence's (NICE's) Medical Technologies Evaluation Programme. Following selection for medical technologies guidance, the company developed a submission of clinical and economic evidence for evaluation. TURis is a bipolar surgical system for treating men with lower urinary tract symptoms due to benign prostatic enlargement. The comparator is any monopolar transurethral resection of the prostate (mTURP) system. Cedar, a collaboration between Cardiff and Vale University Health Board, Cardiff University and Swansea University in the UK, acted as an External Assessment Centre (EAC) for NICE to independently critique the company's submission of evidence. Eight randomised trials provided evidence for TURis, demonstrating efficacy equivalent to that of mTURP for improvement of symptoms. The company presented meta-analyses of key outcome measures, and the EAC made methodological modifications in response to the heterogeneity of the trial data. The EAC analysis found that TURis substantially reduced the relative risks of transurethral resection syndrome (relative risk 0.18 [95 % confidence interval 0.05-0.62]) and blood transfusion (relative risk 0.35 [95 % confidence interval 0.19-0.65]). The company provided a de novo economic model comparing TURis with mTURP. The EAC critiqued the model methodology and made modifications. This found TURis to be cost saving at £70.55 per case for existing Olympus customers and cost incurring at £19.80 per case for non-Olympus customers. When an additional scenario based on the only available data on readmission (due to any cause) from a single trial was modelled, the estimated cost saving per case was £375.02 for existing users of Olympus electrosurgery equipment and £284.66 per case when new Olympus equipment would need to be purchased. Meta-analysis of eight randomised trials showed that TURis is associated with a statistically significantly reduced risk of transurethral resection syndrome and a reduced need for blood transfusion-two factors that may drive cost saving for the National Health Service. The clinical data are equivocal as to whether TURis shortens the hospital stay. Limited data from a single study suggest that TURis may reduce the rate of readmission after surgery. The NICE guidance supports adoption of the TURis technology for performing transurethral resection of the prostate in men with lower urinary tract symptoms due to benign prostatic enlargement.

Evaluating practical vs. theoretical inspection system capability with a new programmed defect test mask designed for 3X and 4X technology nodes

NASA Astrophysics Data System (ADS)

Glasser, Joshua; Pratt, Tim

2008-10-01

Programmed defect test masks serve the useful purpose of evaluating inspection system sensitivity and capability. It is widely recognized that when evaluating inspection system capability, it is important to understand the actual sensitivity of the inspection system in production; yet unfortunately we have observed that many test masks are a more accurate judge of theoretical sensitivity rather than real-world usable capability. Use of ineffective test masks leave the purchaser of inspection equipment open to the risks of over-estimating the capability of their inspection solution and overspecifying defect sensitivity to their customers. This can result in catastrophic yield loss for device makers. In this paper we examine some of the lithography-related technology advances which place an increasing burden on mask inspection complexity, such as MEEF, defect printability estimation, aggressive OPC, double patterning, and OPC jogs. We evaluate the key inspection system component contributors to successful mask inspection, including what can "go wrong" with these components. We designed and fabricated a test mask which both (a) more faithfully represents actual production use cases; and (b) stresses the key components of the inspection system. This mask's patterns represent 32nm, 36nm, and 45nm logic and memory technology including metal and poly like background patterns with programmed defects. This test mask takes into consideration requirements of advanced lithography, such as MEEF, defect printability, assist features, nearly-repetitive patterns, and data preparation. This mask uses patterns representative of 32nm, 36nm, and 45nm logic, flash, and DRAM technology. It is specifically designed to have metal and poly like background patterns with programmed defects. The mask is complex tritone and was designed for annular immersion lithography.

River Protection Project Technology and Innovation Roadmap.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, D. S.; Wooley, T. A.; Kelly, S. E.

The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

Nano-technology and nano-toxicology.

PubMed

Maynard, Robert L

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of exposure to nano-materials and relates these to the evidence of the effects on health of the ambient aerosol. A number of hypotheses are proposed and the dangers of adopting unsubstantiated hypotheses are stressed. Nano-toxicology presents many challenges and will need substantial financial support if it is to develop at a rate sufficient to cope with developments in nano-technology.

Nano-technology and nano-toxicology

PubMed Central

Maynard, Robert L.

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of exposure to nano-materials and relates these to the evidence of the effects on health of the ambient aerosol. A number of hypotheses are proposed and the dangers of adopting unsubstantiated hypotheses are stressed. Nano-toxicology presents many challenges and will need substantial financial support if it is to develop at a rate sufficient to cope with developments in nano-technology. PMID:22662021

Susceptibility of Murine Norovirus and Hepatitis A Virus to Electron Beam Irradiation in Oysters and Quantifying the Reduction in Potential Infection Risks

PubMed Central

Praveen, Chandni; Dancho, Brooke A.; Kingsley, David H.; Calci, Kevin R.; Meade, Gloria K.; Mena, Kristina D.

2013-01-01

Consumption of raw oysters is an exposure route for human norovirus (NoV) and hepatitis A virus (HAV). Therefore, efficient postharvest oyster treatment technology is needed to reduce public health risks. This study evaluated the inactivation of HAV and the NoV research surrogate, murine norovirus-1 (MNV-1), in oysters (Crassostrea virginica) by electron beam (E-beam) irradiation. The reduction of potential infection risks was quantified for E-beam irradiation technology employed on raw oysters at various virus contamination levels. The E-beam dose required to reduce the MNV and HAV titer by 90% (D10 value) in whole oysters was 4.05 (standard deviations [SD], ±0.63) and 4.83 (SD, ±0.08) kGy, respectively. Microbial risk assessment suggests that if a typical serving of 12 raw oysters was contaminated with 105 PFU, a 5-kGy treatment would achieve a 12% reduction (from 4.49 out of 10 persons to 3.95 out of 10 persons) in NoV infection and a 16% reduction (from 9.21 out of 10 persons to 7.76 out of 10 persons) in HAV infections. If the serving size contained only 102 PFU of viruses, a 5-kGy treatment would achieve a 26% reduction (2.74 out of 10 persons to 2.03 out of 10 persons) of NoV and 91% reduction (2.1 out of 10 persons to 1.93 out of 100 persons) of HAV infection risks. This study shows that although E-beam processing cannot completely eliminate the risk of viral illness, infection risks can be reduced. PMID:23584781

Qualitative evaluation of selected social factors that impact sexual risk-taking behaviour among African students in Kwazulu-Natal, South Africa.

PubMed

Ngidi, Ndumiso Daluxolo; Moyo, Sibusiso; Zulu, Thobile; Adam, Jamila Khatoon; Krishna, Suresh Babu Naidu

2016-12-01

The incidence of HIV and AIDS continues to be a source of great concern within universities in South Africa. Furthermore, university students constitute an important community in the intervention against the HIV/AIDS epidemic. Students in the age group of 15-24 years are at a greater risk of HIV infection than any other group in the country; yet, little is known about why they continue to engage in risky sexual practices. This study was designed to explore the sexual behaviour of students in a metropolitan Durban University of Technology in KwaZulu-Natal to understand the social factors underlying their risk of HIV infection. This is a qualitative study that used cluster sampling where the population was stratified by campus and faculty. The study population was selected using a standard randomization technique. This was a part of a multi-phased research project aimed at providing a sero-prevalence baseline and an analysis of risk-taking behaviour at a Durban University of Technology in the eThekwini Metropolitan Municipality area. The study highlights peer pressure among students as an influence in promoting high-risk sexual behaviour. Within this context, the findings revealed that university students lack the ability to negotiate risk-aware decisions especially regarding sexual relationships. This study draws attention to the perspectives of African university students regarding their risk-taking sexual practices and selected factors which influence such behaviour. The findings are not exhaustive in exploring contextual antecedents that shape students' sexual practices. However, they provide an important basis in understanding key factors which expose students to HIV infections. The study provides insights into opportunities for further studies as well as preventative implications.

Qualitative evaluation of selected social factors that impact sexual risk-taking behaviour among African students in Kwazulu-Natal, South Africa

PubMed Central

Ngidi, Ndumiso Daluxolo; Moyo, Sibusiso; Zulu, Thobile; Adam, Jamila Khatoon; Krishna, Suresh Babu Naidu

2016-01-01

Abstract Background: The incidence of HIV and AIDS continues to be a source of great concern within universities in South Africa. Furthermore, university students constitute an important community in the intervention against the HIV/AIDS epidemic. Students in the age group of 15–24 years are at a greater risk of HIV infection than any other group in the country; yet, little is known about why they continue to engage in risky sexual practices. Objectives: This study was designed to explore the sexual behaviour of students in a metropolitan Durban University of Technology in KwaZulu-Natal to understand the social factors underlying their risk of HIV infection. Methods: This is a qualitative study that used cluster sampling where the population was stratified by campus and faculty. The study population was selected using a standard randomization technique. This was a part of a multi-phased research project aimed at providing a sero-prevalence baseline and an analysis of risk-taking behaviour at a Durban University of Technology in the eThekwini Metropolitan Municipality area. Results: The study highlights peer pressure among students as an influence in promoting high-risk sexual behaviour. Within this context, the findings revealed that university students lack the ability to negotiate risk-aware decisions especially regarding sexual relationships. Conclusion: This study draws attention to the perspectives of African university students regarding their risk-taking sexual practices and selected factors which influence such behaviour. The findings are not exhaustive in exploring contextual antecedents that shape students’ sexual practices. However, they provide an important basis in understanding key factors which expose students to HIV infections. The study provides insights into opportunities for further studies as well as preventative implications. PMID:27687152

Is it real? Can we win? Is it worth doing? Managing risk and reward in an innovation portfolio.

PubMed

Day, George S

2007-12-01

Minor innovations make up most of a company's development portfolio, on average, but they never generate the growth companies seek. The solution, says Day--the Geoffrey T. Boisi Professor of Marketing and a codirector of the Mack Center for Technological Innovation at Wharton--is for companies to undertake a systematic, disciplined review of their innovation portfolios and increase the number of major innovations at an acceptable level of risk. Two tools can help them do this. The first, called the risk matrix, graphically reveals the distribution of risk across a company's entire innovation portfolio. The matrix allows companies to estimate each project's probability of success or failure, based on how big a stretch it is for the firm to undertake. The less familiar the product or technology and the intended market, the higher the risk. The second tool, dubbed the R-W-W (real-win-worth it) screen, allows companies to evaluate the risks and potential of individual projects by answering six fundamental questions about each one: Is the market real? Explores customers' needs, their willingness to buy, and the size of the potential market. Is the product real? Looks at the feasibility of producing the innovation. Can the product be competitive? and Can our company be competitive? Investigate how well suited the company's resources and management are to compete in the marketplace with the product. Will the product be profitable at an acceptable risk? Explores the financial analysis needed to assess an innovation's commercial viability. Last, Does launching the product make strategic sense? examines the project's fit with company strategy and whether management supports it.

Susceptibility of murine norovirus and hepatitis A virus to electron beam irradiation in oysters and quantifying the reduction in potential infection risks.

PubMed

Praveen, Chandni; Dancho, Brooke A; Kingsley, David H; Calci, Kevin R; Meade, Gloria K; Mena, Kristina D; Pillai, Suresh D

2013-06-01

Consumption of raw oysters is an exposure route for human norovirus (NoV) and hepatitis A virus (HAV). Therefore, efficient postharvest oyster treatment technology is needed to reduce public health risks. This study evaluated the inactivation of HAV and the NoV research surrogate, murine norovirus-1 (MNV-1), in oysters (Crassostrea virginica) by electron beam (E-beam) irradiation. The reduction of potential infection risks was quantified for E-beam irradiation technology employed on raw oysters at various virus contamination levels. The E-beam dose required to reduce the MNV and HAV titer by 90% (D(10) value) in whole oysters was 4.05 (standard deviations [SD], ±0.63) and 4.83 (SD, ±0.08) kGy, respectively. Microbial risk assessment suggests that if a typical serving of 12 raw oysters was contaminated with 10(5) PFU, a 5-kGy treatment would achieve a 12% reduction (from 4.49 out of 10 persons to 3.95 out of 10 persons) in NoV infection and a 16% reduction (from 9.21 out of 10 persons to 7.76 out of 10 persons) in HAV infections. If the serving size contained only 10(2) PFU of viruses, a 5-kGy treatment would achieve a 26% reduction (2.74 out of 10 persons to 2.03 out of 10 persons) of NoV and 91% reduction (2.1 out of 10 persons to 1.93 out of 100 persons) of HAV infection risks. This study shows that although E-beam processing cannot completely eliminate the risk of viral illness, infection risks can be reduced.

Exploring for the optimal structural design for the 3D-printing technology for cranial reconstruction: a biomechanical and histological study comparison of solid vs. porous structure.

PubMed

Lim, Jun Young; Kim, Namhyun; Park, Jong-Chul; Yoo, Sun K; Shin, Dong Ah; Shim, Kyu-Won

2017-09-01

Cranioplasty for recovering skull defects carries the risk for a number of complications. Various materials are used, including autologous bone graft, metallic materials, and non-metallic materials, each of which has advantages and disadvantages. If the use of autologous bone is not feasible, those artificial materials also have constraints in the case of complex anatomy and/or irregular defects. This study used metal 3D-printing technology to overcome these existing drawbacks and analyze the clinical and mechanical performance requirements. To find an optimal structure that satisfied the structural and mechanical stability requirements, we evaluated biomechanical stability using finite element analysis (FEA) and mechanical testing. To ensure clinical applicability, the model was subjected to histological evaluation. Each specimen was implanted in the femur of a rabbit and was evaluated using histological measurements and push-out test. We believe that our data will provide the basis for future applications of a variety of unit structures and further clinical trials and research, as well as the direction for the study of other patient-specific implants.

Developing Use Cases for Evaluation of ADMS Applications to Accelerate Technology Adoption: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veda, Santosh; Wu, Hongyu; Martin, Maurice

Grid modernization for the distribution systems comprise of the ability to effectively monitor and manage unplanned events while ensuring reliable operations. Integration of Distributed Energy Resources (DERs) and proliferation of autonomous smart controllers like microgrids and smart inverters in the distribution networks challenge the status quo of distribution system operations. Advanced Distribution Management System (ADMS) technologies are being increasingly deployed to manage the complexities of operating distribution systems. The ability to evaluate the ADMS applications in specific utility environments and for future scenarios will accelerate wider adoption of the ADMS and will lower the risks and costs of their implementation.more » This paper addresses the first step - identify and define the use cases for evaluating these applications. The applications that are selected for this discussion include Volt-VAr Optimization (VVO), Fault Location Isolation and Service Restoration (FLISR), Online Power Flow (OLPF)/Distribution System State Estimation (DSSE) and Market Participation. A technical description and general operational requirements for each of these applications is presented. The test scenarios that are most relevant to the utility challenges are also addressed.« less

Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-15-1-0632 TITLE: Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk PRINCIPAL INVESTIGATOR: Brian...CONTRACT NUMBER Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk 5b. GRANT NUMBER W81XWH-15-1-0632 5c. PROGRAM...Public Release; Distribution Unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT The primary aim of the proposed project is to develop cognitive and

National Rehabilitation Hospital Assistive Technology Research Center

DTIC Science & Technology

1997-11-01

Individuals to be included are those who had a recent stroke, are judged not to be at high risk for having potential medical side - effects of taking the...detecting and characterizing concussion; investigation of the cognitive effects of ginkgo on stroke patients; application and evaluation of virtual reality... effectiveness of the video game based therapy. Proposed Work and Outcomes for Year 4: For year 4, the research team proposes to complete a pilot test of a

Engaging At-Risk Students with Technology.

ERIC Educational Resources Information Center

Duttweiler, Patricia Cloud

1992-01-01

Educational technology can be used to engage students in interesting activities through which teachers can present skills, concepts, and problems to be solved. At-risk students benefit from the investigation of relevant real world problems and the immediate feedback and privacy that technology affords. (EA)

Mobile Health (mHealth) Technology for the Management of Hypertension and Hyperlipidemia: Slow Start but Loads of Potential.

PubMed

Rehman, Hasan; Kamal, Ayeesha K; Morris, Pamela B; Sayani, Saleem; Merchant, Anwar T; Virani, Salim S

2017-03-01

Hypertension and hyperlipidemia represent two major risk factors for atherosclerotic cardiovascular disease. Mobile health or mHealth is defined as the use of mobile phone and wireless technologies to support the achievement of health objectives. Management of hypertension, and to some extent hyperlipidemia, has often employed mHealth interventions given lower cost and greater patient engagement compared to traditional methods. These interventions include the use of text messaging, wireless devices, and mobile phone applications. This review considers recent studies evaluating the effectiveness of mHealth interventions in the management of hypertension and hyperlipidemia. Numerous studies have evaluated the role of mHealth interventions in the management of hypertension, while very few have evaluated their role in hyperlipidemia. Text messaging has been used most frequently. However, the trend is shifting towards the use of mobile phone applications and wireless devices. Interventions in developing countries have been modified for greater applicability to local settings. mHealth interventions were found to be frequently effective. However, studies comparing the relative efficacy of various mHealth strategies are scarce. Long-term cardiovascular outcomes data and analyses relating to cost effectiveness are also lacking. mHealth interventions may be effective in improving hypertension management. More studies are needed to evaluate the role of mHealth strategies in hyperlipidemia management, particularly in identifying high-risk individuals and improving medication adherence. Studies assessing the long-term impact of these interventions, comparing different interventions and analyzing their relative cost effectiveness, are also needed. Following recently published guidelines on reporting results of mHealth interventions will provide a more meaningful context for interpreting these promising early studies.

Design definition study of a NASA/Navy lift/cruise fan technology V/STOL airplane: Risk assessment addendum to the final report

NASA Technical Reports Server (NTRS)

Zabinsky, J. M.; Burnham, R. W.; Flora, C. C.; Gotlieb, P.; Grande, D. L.; Gunnarson, D. W.; Howard, W. M.; Hunt, D.; Jakubowski, G. W.; Johnson, P. E.

1975-01-01

An assessment of risk, in terms of delivery delays, cost overrun, and performance achievement, associated with the V/STOL technology airplane is presented. The risk is discussed in terms of weight, structure, aerodynamics, propulsion, mechanical drive, and flight controls. The analysis ensures that risks associated with the design and development of the airplane will be eliminated in the course of the program and a useful technology airplane that meets the predicted cost, schedule, and performance can be produced.

Birth Outcomes by Infertility Diagnosis Analyses of the Massachusetts Outcomes Study of Assisted Reproductive Technologies (MOSART).

PubMed

Luke, Barbara; Stern, Judy E; Kotelchuck, Milton; Declercq, Eugene R; Cohen, Bruce; Diop, Hafsatou

2015-01-01

To evaluate assisted reproductive technology (ART) pregnancy outcomes by infertility diagnosis. ART data on women who were treated and gave birth in Massachusetts were linked to vital records and hospital utilization data. Live births were categorized by 8 mutually exclusive ART diagnoses. Risks of prematurity, low birthweight (LBW), small-for-gestational age (SGA), large-for-gestational age (LGA), pregnancy hypertension, gestational diabetes, prenatal hospitalizations, and primary cesarean delivery were modeled using logistic regression, adjusted for parental characteristics, treatment parameters, and plurality (adjusted odds ratios [AORs] and 95% confidence intervals); the reference group were pregnancies with the diagnosis of malefactor. Among the 7,354 singleton and twin pregnancies, there were nonsignificant differences in the risks for LBW, SGA, or LGA. Significantly increased risks included gestational diabetes (ovulation disorders, AOR 1.80, 1.35-2.41), prematurity (ovulation disorders, AOR 1.36, 1.08-1.71; other factors, AOR 1.33, 1.05-1.67), prenatal hospital admissions (endometriosis, tubal and other factors, ovulation disorders, and uterine factors, AORs ranging from 1.66-2.68), and primary cesarean section (uterine factors, AOR 1.96, 1.15-3.36). Although the infant outcomes of LBW, SGA, and LGA were generally similar across diagnosis groups, specific diagnoses had greater risks for prematurity, gestational diabetes, prenatal hospital utilization, and primary cesarean delivery. (J Reprod Med 2015;

Variable speed generator application on the MOD-5A 7.3 mW wind turbine generator

NASA Technical Reports Server (NTRS)

Barton, Robert S.

1995-01-01

This paper describes the application of a Scherbiustat type variable speed subsystem in the MOD-5A Wind Turbine Generator. As designed by General Electric Company, Advanced Energy Programs Department, under contract DEN3-153 with NASA Lewis Research Center and DOE, the MOD-5A utilizes the subsystem for both starting assistance in a motoring mode and generation in a controlled airgap torque mode. Reactive power control is also provided. The Scherbiustat type arrangement of a wound rotor machine with a cycloconverter in the rotor circuit was selected after an evaluation of variable speed technologies that followed a system evaluation of drivetrain cost and risk. The paper describes the evaluation factors considered, the results of the evaluations and summarizes operating strategy and performance simulations.

A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tortorelli, J.P.

1995-08-01

A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactivemore » materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance.« less

Integrating human and ecological risk assessment: application to the cyanobacterial harmful algal bloom problem.

PubMed

Orme-Zavaleta, Jennifer; Munns, Wayne R

2008-01-01

Environmental and public health policy continues to evolve in response to new and complex social, economic and environmental drivers. Globalization and centralization of commerce, evolving patterns of land use (e.g., urbanization, deforestation), and technological advances in such areas as manufacturing and development of genetically modified foods have created new and complex classes of stressors and risks (e.g., climate change, emergent and opportunist disease, sprawl, genomic change). In recognition of these changes, environmental risk assessment and its use are changing from stressor-endpoint specific assessments used in command and control types of decisions to an integrated approach for application in community-based decisions. As a result, the process of risk assessment and supporting risk analyses are evolving to characterize the human-environment relationship. Integrating risk paradigms combine the process of risk estimation for humans, biota, and natural resources into one assessment to improve the information used in environmental decisions (Suter et al. 2003b). A benefit to this approach includes a broader, system-wide evaluation that considers the interacting effects of stressors on humans and the environment, as well the interactions between these entities. To improve our understanding of the linkages within complex systems, risk assessors will need to rely on a suite of techniques for conducting rigorous analyses characterizing the exposure and effects relationships between stressors and biological receptors. Many of the analytical techniques routinely employed are narrowly focused and unable to address the complexities of an integrated assessment. In this paper, we describe an approach to integrated risk assessment, and discuss qualitative community modeling and Probabilistic Relational Modeling techniques that address these limitations and evaluate their potential for use in an integrated risk assessment of cyanobacteria.

Endosonography in the diagnosis and management of pancreatic cysts

PubMed Central

Kadiyala, Vivek; Lee, Linda S

2015-01-01

Rapid advances in radiologic technology and increased cross-sectional imaging have led to a sharp rise in incidental discoveries of pancreatic cystic lesions. These cystic lesions include non-neoplastic cysts with no risk of malignancy, neoplastic non-mucinous serous cystadenomas with little or no risk of malignancy, as well as neoplastic mucinous cysts and solid pseudopapillary neoplasms both with varying risk of malignancy. Accurate diagnosis is imperative as management is guided by symptoms and risk of malignancy. Endoscopic ultrasound (EUS) allows high resolution evaluation of cyst morphology and precise guidance for fine needle aspiration (FNA) of cyst fluid for cytological, chemical and molecular analysis. Initially, clinical evaluation and radiologic imaging, preferably with magnetic resonance imaging of the pancreas and magnetic resonance cholangiopancreatography, are performed. In asymptomatic patients where diagnosis is unclear and malignant risk is indeterminate, EUS-FNA should be used to confirm the presence or absence of high-risk features, differentiate mucinous from non-mucinous lesions, and diagnose malignancy. After analyzing the cyst fluid for viscosity, cyst fluid carcinoembryonic antigen, amylase, and cyst wall cytology should be obtained. DNA analysis may add useful information in diagnosing mucinous cysts when the previous studies are indeterminate. New molecular biomarkers are being investigated to improve diagnostic capabilities and management decisions in these challenging cystic lesions. Current guidelines recommend surgical pancreatic resection as the standard of care for symptomatic cysts and those with high-risk features associated with malignancy. EUS-guided cyst ablation is a promising minimally invasive, relatively low-risk alternative to both surgery and surveillance. PMID:25789091

Evaluation of Technologies to Prevent Precipitation During Water Recovery from Urine

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Pickering, Karen D.; Adam, Niklas M.; Mitchell, Julie L.; Anderson, Molly S.; Carter, Layne; Muirhead, Dean; Gazda, Daniel B.

2011-01-01

The International Space Station (ISS) Urine Processor Assembly (UPA) experienced a hardware failure in the Distillation Assembly (DA) in October 2010. Initially the UPA was operated to recover 85% of the water from urine through distillation, concentrating the contaminants in the remaining urine. The DA failed due to precipitation of calcium sulfate (gypsum) which caused a loss of UPA function. The ISS UPA operations have been modified to only recover 70% of the water minimizing gypsum precipitation risk but substantially increasing water resupply needs. This paper describes the feasibility assessment of several technologies (ion exchange, chelating agents, threshold inhibitors, and Lorentz devices) to prevent gypsum precipitation. The feasibility assessment includes the development of assessment methods, chemical modeling, bench top testing, and validation testing in a flight-like ground UPA unit. Ion exchange technology has been successfully demonstrated and has been recommended for further development. The incorporation of the selected technology will enable water recovery to be increased from 70% back to the original 85% and improve the ISS water balance.

Bioprinting: an assessment based on manufacturing readiness levels.

PubMed

Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

2017-05-01

Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

Emerging Technologies for Real-Time Continuous Monitoring of Wellbore Integrity

NASA Astrophysics Data System (ADS)

Freifeld, B. M.

2017-12-01

Assessment of a well's integrity has traditionally been carried out through periodic wireline logging, often performed only when an operational problem was noted at the surface. There are several emerging technologies that can be installed permanently as part of the well completion and offer the ability to monitor operations while providing continuous indicators to evaluate the structural health of a well. Permanent behind casing instrumentation, such as pressure and temperature gauges can monitor for behind casing leakage. Similarly, fiber-optic distributed temperature and acoustic sensing provide additional information for assessing unwanted movement of fluid, which is indicative of problems either inside or outside of casing. Furthermore, these technologies offer the benefit of providing real-time continuous streams of information that serve as leading-indicators of wellbore problems to allow for early intervention. Additional research is still needed to develop best practices for the installation and operation of these technologies, as they increase cost and add additional risks that must be managed.

Possibilities for mixed mode chip manufacturing in EUROPRACTICE

NASA Astrophysics Data System (ADS)

Das, C.

1997-02-01

EUROPRACTICE is an EC initiative under the ESPRIT programme which aims to stimulate the wider exploitation of state-of-the-art microelectronics technologies by European industry and to enhance European industrial competitiveness in the global market-place. Through EUROPRACTICE, the EC has created a range of Basic Services that offer users a cost-effective and flexible means of accessing three main microelectronics-based technologies: Application Specific Integrated Circuit (ASICs), Multi-Chip Modules (MCMs) and Microsystems. EUROPRACTICE Basic Services reduce the cost and risk for companies wishing to begin using these technologies. EUROPRACTICE offers a fully supported, low cost route for companies to design and fabricate ASICs for their individual applications. Low cost is achieved by consolidating designs from many users onto a single semiconductor wafer (MPW: Multi Project Wafer). The EUROPRACTICE IC Manufacturing Service (ICMS) offers a broad range of fabrication technologies including CMOS, BiCMOS and GaAs. The Service extends from enabling users to produce prototype ASICs for testing and evaluation, through to low-volume production runs.