The Scientific Status of Projective Techniques.

PubMed

Lilienfeld, S O; Wood, J M; Garb, H N

2000-11-01

Although projective techniques continue to be widely used in clinical and forensic settings, their scientific status remains highly controversial. In this monograph, we review the current state of the literature concerning the psychometric properties (norms, reliability, validity, incremental validity, treatment utility) of three major projective instruments: Rorschach Inkblot Test, Thematic Apperception Test (TAT), and human figure drawings. We conclude that there is empirical support for the validity of a small number of indexes derived from the Rorschach and TAT. However, the substantial majority of Rorschach and TAT indexes are not empirically supported. The validity evidence for human figure drawings is even more limited. With a few exceptions, projective indexes have not consistently demonstrated incremental validity above and beyond other psychometric data. In addition, we summarize the results of a new meta-analysis intended to examine the capacity of these three instruments to detect child sexual abuse. Although some projective instruments were better than chance at detecting child sexual abuse, there were virtually no replicated findings across independent investigative teams. This meta-analysis also provides the first clear evidence of substantial file drawer effects in the projectives literature, as the effect sizes from published studies markedly exceeded those from unpublished studies. We conclude with recommendations regarding the (a) construction of projective techniques with adequate validity, (b) forensic and clinical use of projective techniques, and (c) education and training of future psychologists regarding projective techniques. © 2000 Association for Psychological Science.

Analysis by gender and Visual Imagery Reactivity of conventional and imagery Rorschach.

PubMed

Yanovski, A; Menduke, H; Albertson, M G

1995-06-01

Examined here are the effects of gender and Visual Imagery Reactivity in 80 consecutively selected psychiatric outpatients. The participants were grouped by gender and by the amounts of responsiveness to preceding therapy work using imagery (Imagery Nonreactors and Reactors). In the group of Imagery Nonreactors were 13 men and 22 women, and in the Reactor group were 17 men and 28 women. Compared were the responses to standard Rorschach (Conventional condition) with visual associations to memory images of Rorschach inkblots (Imagery condition). Responses were scored using the Visual Imagery Reactivity (VIR) scoring system, a general, test-nonspecific scoring method. Nonparametric statistical analysis showed that critical indicators of Imagery Reactivity encoded as High Affect/Conflict score and its derivatives associated with sexual or bizarre content were not significantly associated with gender; neither was Neutral Content score which categorizes "non-Reactivity." These results support the notion that system's criteria of Visual Imagery Reactivity can be applied equally to both men and women for the classification of Imagery Reactors and Nonreactors. Discussed are also the speculative consequences of extending the tolerance range of significance levels for the interaction between Reactivity and sex above the customary limit of p < .05 in borderline cases. The results of such an analysis may imply a trend towards more rigid defensiveness under Imagery and toward lesser verbal productivity in response to either the Conventional or the Imagery task among women who are Nonreactors. In Reactors, men produced significantly more Sexual Reference scores (in the subcategory not associated with High Affect/Conflict) than women, but this could be attributed to the effect of tester's and subjects' gender combined.

Incarcerated Violent Offenders' Ability to Avoid Revealing Their Potential for Violence on the Rorschach and the MMPI-2.

PubMed

Nørbech, Peder Chr Bryhn; Fodstad, Lars; Kuisma, Irene; Lunde, Ketil Berge; Hartmann, Ellen

2016-01-01

Recently, Hartmann and Hartmann (2014) found that psychiatric outpatients, both with and without access to Internet-based information about the Rorschach Inkblot Method (RIM; Weiner, 2003 ) and the MMPI-2 (Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989 ), were unable to imitate healthy test performance on these tests. We replicated the study by administering the RIM and the MMPI-2 to 63 incarcerated violent offenders using similar testing conditions. As in the previous study, comparisons were made not only among the 3 subgroups of incarcerated offenders, but also between these offender groups and the group of nonpatients examined in the previous study. On the RIM, Internet-coached and uncoached "faking good" offenders produced records with significantly higher F% and X-% and significantly lower M, m, SumC, X+%, P, AG, and COP than nonoffenders under standard instructions (effect sizes between d = 0.24 and d = 2.39). For AgC, AgPot, AgPast, and TCI% there were no significant differences between the faking offenders and the nonoffenders under standard instructions. On the MMPI-2 clinical scales, there were no significant differences between the faking good groups and the nonoffenders under standard instructions, except on Hs, Pd, and Sc. Both faking groups were identifiable by their high L scale scores. Although both faking groups managed to avoid giving responses with aggressive and generally psychopathological content on the RIM, they were unable to produce test profiles demonstrating healthy test performance on any of the tests; nevertheless, Internet-based test information might weaken test validity.

Results of post-test psychological examinations of the crewmen from the 90-day manned test of an advanced regenerative life support system

NASA Technical Reports Server (NTRS)

Seeman, J. S.; Macfarlane, T. G.

1972-01-01

The following material presents the results of two temporally remote administrations of an identical projective personality assessment device (Rorschach Inkblot) using crew members aboard the 90-day test. The first administration took place during preselection crew psychodiagnostic testing in the period extending from mid-December 1969 through mid-January 1970. Second administration took place in late May and early June, 1971, approximately one year after termination of the test. During the 90-day program duration, the subjects participated in the crew training program, were selected and served as onboard crew during the 90-day test. The testing was undertaken in order to determine the character and extent of change (if any) in basic personality dynamics accompanying or caused by participation in the 90-day test program. Results indicate that significant personality changes occurred in three of the four onboard crew members. A detailed discussion of the results is provided. Objective scores which served as the basis for the discussion are presented in the Appendix.

On the integration of personality assessment methods: the Rorschach and MMPI.

PubMed

Meyer, G J

1997-04-01

Despite being the most studied and used personality assessment tools, data from the Rorschach and MMPI generally disagree (Archer & Krishnamurthy, 1993a, 1993b). Independence is proposed to result from at least 3 factors: (a) the methods tap unique levels of personality, (b) personality has a complex organization, and (c) response styles generate considerable method variance that must be considered in nomothetic research. These ideas led to 5 hypotheses, each of which received support. Rorschach and MMPI response styles are uncorrelated, although response styles are quite consistent within a method family. MMPI-2 and Rorschach constructs of dysphoria, psychosis, or wariness are uncorrelated when response styles are ignored. However, robust convergent validity is evident when patients have similar response styles on each method (e.g., for dysphoria, M r = .59) and dysphoria is expressed in opposing ways on each method when response styles are discordant (i.e., M r = -.54). Data from the latter analyses were correlated with genuine clinical phenomena and implications were discussed for clinical practice and research.

The effects of violent media on adolescent inkblot responses: implications for clinical and forensic assessments.

PubMed

Hess, T H; Hess, K D; Hess, A K

1999-04-01

Two experiments were conducted to assess the degree to which violent media stimulate violent fantasy as depicted on inkblot responses. In Experiment I, 41 gifted high school students were exposed to a bucolic or violent film clip and then were asked to produce inkblot responses. In Experiment II, a second sample of 43 additional students were exposed to a verbal description of the bucolic or violent scene to assess whether the "hot" or "cooler" media (McLuhan, 1964) had different effects on the inkblot responses. In both experiments, the media exposure led to increased levels of violent responses, and in both cases males produced more violent responses. There was no sex by media interaction effect. Implications for clinical and forensic assessments are presented.

[Gender identity disorders or andromimetic behaviour in a victim of incest--a case study].

PubMed

Piegza, Magdalena; Leksowska, Aleksandra; Pudlo, Robert; Badura-Brzoza, Karina; Matysiakiewicz, Jerzy; Gierlotka, Zbigniew; Gorczyca, Piotr W

2014-01-01

Nowadays, it is becoming increasingly difficult to clearly classify the issues associated with the phenomenon of gender dysphoria due to the fact that one identifies oneself in the context of increasingly fluid categories of gender identity-- an intrinsic sense of being a woman or a man. The authors present a woman whose internal problems connected with her sexuality and incomplete identification with the role attributed to her gender originate from her family history. Long-lasting, traumatic experiences of incestuous abuse and violence on the part of close relatives disturbed her development in many areas of personality and functioning. The aim of the study was to verify the hypothesis of the existence of gender identity disorder accompanied by depressive disorders. In addition to the medical history, the study of patient's problems included the following diagnostic tools: the Minnesota Multiphasic Personality Inventory (MMPI) and the Rorschach Inkblot Test in a CSR Exner system (TPA). The study revealed that as for sexual identification, the patient unambiguously identifies herself as a woman. Her behaviour to become like a man does not deny her sex, or even involve a temporary need of belonging to the opposite sex. It should be interpreted in the broader context of her traumatic experiences, not just sexual, but also concerning different aspects of a female gender role.

Might the Rorschach be a projective test after all? Social projection of an undesired trait alters Rorschach Oral Dependency scores.

PubMed

Bornstein, Robert F

2007-06-01

The degree to which projection plays a role in Rorschach (Rorschach, 1921/1942) responding remains controversial, in part because extant data have yielded inconclusive results. In this investigation, I examined the impact of social projection on Rorschach Oral Dependency (ROD) scores using methods adapted from social cognition research. In Study 1, I prescreened 85 college students (40 women and 45 men) with the ROD scale and a widely used self-report measure of dependency, the Interpersonal Dependency Inventory (IDI; Hirschfeld et al., 1977). Results show that informing participants who scored low on the IDI that they were in fact highly dependent led to significant increases in ROD scores; I did not obtain parallel ROD increases for participants who scored high on the IDI or for participants who received low-dependent feedback. In Study 2, I examined a separate sample of 80 prescreened college students (40 women and 40 men) and showed that providing low self-report participants an opportunity to attribute dependency to a fictional target person prior to Rorschach responding attenuated the impact of high-dependent feedback on ROD scores. These results suggest that projection played a role in at least one domain of Rorschach responding. I discuss theoretical, clinical, and empirical implications of these results.

The analyst's Rorschach: gateway to opening the dialectical field.

PubMed

Alexy, William

2018-02-01

The author offers an account of his evolving relationship with the Rorschach test which for over 20 years as a private practice psychologist, he used in his clinical practice with the intent of mining patients' psyches for useful information about personality organization and functioning. Coinciding with having found himself on the homestretch of analytic training and during a time when he desired clarity on how Rorschach assessment and Jungian analysis could fruitfully merge, there was an unexpected shift in emphasis wherein the Rorschach suddenly became a method for looking at himself as well. This challenge to identify and integrate aspects of self hitherto neglected was found to enrich his clinical practice. An historical perspective on this experience is offered which highlights the enigmatic relationship that existed between Carl Jung and Hermann Rorschach. The proverbial question of 'What might this be?' has been asked when administering the Rorschach for nearly a century. From an analytic perspective, the question is more fully and meaningfully asked when the person doing the asking has also been willing to step in, look around, and take notice of what happens. © 2018, The Society of Analytical Psychology.

Constructivism and the projective assessment of meaning in Rorschach administration.

PubMed

Raskin, J D

2001-08-01

Constructivist perspectives on the Rorschach are outlined. I discuss ways in which constructivism complements and adds to existing Rorschach methodologies. It is suggested hat the constructivist emphasis on personally and socially constructed meanings is very consistent with many of the ways the Rorschach has been used and resonates with recent emphases on the Rorschach as a representational task. Furthermore, constructivist perspectives on Rorschach also provide an opportunity to supplement Exner's (1993, 1995) efforts to standardize and norm the Rorschach in a way that maintains the instrument's historic and admirable attention to relational elements of assessment and psychotherapy. I present a variety of meaning-based techniques for conducting Rorschach assessment, incorporating both the constructivist and social constructionist perspective.

BLOTS AND ALL: A HISTORY OF THE RORSCHACH INK BLOT TEST IN BRITAIN.

PubMed

Hubbard, Katherine; Hegarty, Peter

2016-01-01

Despite the easily recognizable nature of the Rorschach ink blot test very little is known about the history of the test in Britain. We attend to the oft-ignored history of the Rorschach test in Britain and compare it to its history in the US. Prior to the Second World War, Rorschach testing in Britain had attracted advocates and critiques. Afterward, the British Rorschach Forum, a network with a high proportion of women, developed around the Tavistock Institute in London and The Rorschach Newsletter. In 1968, the International Rorschach Congress was held in London but soon after the group became less exclusive, and fell into decline. A comparative account of the Rorschach in Britain demonstrates how different national institutions invested in the 'projective hypothesis' according to the influence of psychoanalysis, the adoption of a nationalized health system, and the social positioning of 'others' throughout the twentieth century. In comparing and contrasting the history of the Rorschach in Britain and the US, we decentralize and particularize the history of North American Psychology. © 2016 Wiley Periodicals, Inc.

There Is an Alternative to the IQ

ERIC Educational Resources Information Center

Allen, Robert M.

1975-01-01

The inkblot method was used to differentiate how a person, who is considered retarded from the viewpoint of measured intelligence, deals with familiar and unfamiliar problems. The language and mode of perceiving, organizing, and responding of an individual while problem solving is emphasized. (Author/BJG)

The Rorschach: projective technique or psychometric test?

PubMed

Aronow, E; Reznikoff, M; Moreland, K L

1995-04-01

Various approaches to the Rorschach Technique are described in terms of the idiographic-nomothetic axis and the perceptual-content axis. It is suggested that it is most productive to view the Rorschach as a projective tool, with perceptual scoring a secondary factor. Current efforts at objectification of the Rorschach are not seen as useful as efforts to enhance its projective qualities. Some possible ways are discussed in which the projective value of the instrument can be maximized.

A Role-Play Rorschach Procedure

ERIC Educational Resources Information Center

Bricklin, Barry

1975-01-01

Three subjects were used in a role playing study based on the subject's own Rorschach responses. The results proved to be valuable as an aspect of therapeutic involvement. Results also help to expand and clarify the psychological meaning of Rorschach images. (Author/DEP)

The Rorschach Perceptual-Thinking Index (PTI): An Examination of Reliability, Validity, and Diagnostic Efficiency

ERIC Educational Resources Information Center

Hilsenroth, Mark J.; Eudell-Simmons, Erin M.; DeFife, Jared A.; Charnas, Jocelyn W.

2007-01-01

This study investigates the reliability, validity, and diagnostic efficiency of the Rorschach Perceptual-Thinking Index (PTI) in relation to the accurate identification of psychotic disorder (PTD) patients. The PTI is a revision of the Rorschach Schizophrenia Index (SCZI), designed to achieve several criteria, including an increase in the…

RORSCHACH'S TEST. VOLUME II, A VARIETY OF PERSONALITY PICTURES.

ERIC Educational Resources Information Center

BECK, SAMUEL J.; MOLISH, HERMAN B.

REVISED AND REWRITTEN FROM THE 1945 EDITION, THE TEXT DESCRIBES AND ANALYZES THE RORSCHACH TEST. PART 1 OF THE VOLUME WAS WRITTEN BY SAMUEL J. BECK AND PRESENTS A VARIETY OF PERSONALITY PICTURES DRAWN FROM RORSCHACH PROTOCOLS AND THEIR INTERPRETATION. EXCERPTS FROM 29 CASE STUDIES ARE INCLUDED ON FIVE DIMENSIONS--THE INTELLIGENCE CURVE, YOUNG…

A critique of Lilienfeld et al.'s (2000) "The scientific status of projective techniques".

PubMed

Hibbard, Stephen

2003-06-01

Lilienfeld, Wood, and Garb (2000) published a largely negative critique of the validity and reliability of projective methods, concentrating on the Comprehensive System for the Rorschach (Exner, 1993), 3 systems for coding the Thematic Apperception Test (TAT; Murray, 1943) cards, and human figure drawings. This article is an effort to document and correct what I perceive as errors of omission and commission in the Lilienfeld et al. article. When projective measures are viewed in the light of these corrections, the evidence for the validity and clinical usefulness of the Rorschach and TAT methods is more robust than Lilienfeld et al. represented.

Convergence of self-report scales and Rorschach indexes of psychological distress: the moderating role of self-disclosure.

PubMed

Berant, Ety; Newborn, Michal; Orgler, Smadar

2008-01-01

In this study, we addressed the weak associations found in research between self-report measures and the Rorschach test (Exner, 1978, 1991), from the perspective of Bornstein's (2002) "process dissociation framework." Specifically, in the study, we focused on the associations between self-report measures of psychological distress and their corresponding Rorschach indexes while inspecting the moderating role of self-disclosure. A total of 59, nonpatient Israeli adults participated in a 2-session study. In the first session, they completed self-report scales measuring self-disclosure and psychological distress (suicidality, depression, and loneliness). In the second session, the Rorschach test was administered and coded. The participants were divided into high and low self-disclosure groups. A convergence between self-report and Rorschach measures of psychological distress was found only among high self-disclosers. In the discussion, we address the theoretical and clinical implications of these findings.

The Impact of an Ego Depletion Manipulation on Performance-Based and Self-Report Assessment Measures.

PubMed

Charek, Daniel B; Meyer, Gregory J; Mihura, Joni L

2016-10-01

We investigated the impact of ego depletion on selected Rorschach cognitive processing variables and self-reported affect states. Research indicates acts of effortful self-regulation transiently deplete a finite pool of cognitive resources, impairing performance on subsequent tasks requiring self-regulation. We predicted that relative to controls, ego-depleted participants' Rorschach protocols would have more spontaneous reactivity to color, less cognitive sophistication, and more frequent logical lapses in visualization, whereas self-reports would reflect greater fatigue and less attentiveness. The hypotheses were partially supported; despite a surprising absence of self-reported differences, ego-depleted participants had Rorschach protocols with lower scores on two variables indicative of sophisticated combinatory thinking, as well as higher levels of color receptivity; they also had lower scores on a composite variable computed across all hypothesized markers of complexity. In addition, self-reported achievement striving moderated the effect of the experimental manipulation on color receptivity, and in the Depletion condition it was associated with greater attentiveness to the tasks, more color reactivity, and less global synthetic processing. Results are discussed with an emphasis on the response process, methodological limitations and strengths, implications for calculating refined Rorschach scores, and the value of using multiple methods in research and experimental paradigms to validate assessment measures. © The Author(s) 2015.

Revising the Rorschach Ego Impairment Index to Accommodate Recent Recommendations about Improving Rorschach Validity

ERIC Educational Resources Information Center

Viglione, Donald J.; Perry, William; Giromini, Luciano; Meyer, Gregory J.

2011-01-01

We used multiple regression to calculate a new Ego Impairment Index (EII-3). The aim was to incorporate changes in the component variables and distribution of the number of responses as found in the new Rorschach Performance Assessment System, while sustaining the validity and reliability of previous EIIs. The EII-3 formula was derived from a…

Rorschach assessment of cognitive impairment from an object relations perspective.

PubMed

Lerner, P M

1996-01-01

In 1986, H. Lerner and P. Lerner proposed an object relations model of thinking that integrated Piaget's theory of early cognitive development with Mahler's theory of separation-individuation. They identified three distinct, interdigitated stages, outlined the cognitive task for each stage, detailed the necessary role and function of the stage-specific caregiving object, and suggested potential cognitive impairments associated with the object not fulfilling its function. Herein, this conceptual model is extended to the Rorschach. Rorschach indices of cognitive impairments associated with each stage were developed. The indices are then applied to the Rorschach records of children who were selected as prototypical of specific developmental disorders.

Rorschach Comprehensive System data for a sample of 141 adult nonpatients from Denmark.

PubMed

Ivanouw, Jan

2007-01-01

A sample (n = 141) of Danish nonpatients 25-50 years of age, never hospitalized with a psychiatric diagnosis and currently employed, was demographically representative of two geographical areas of Copenhagen with different social strain. The sample, as well as 45 persons not currently employed, was tested with the Rorschach (Exner, 1995), MMPI-2 (Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989), Word Association Test (Ivanouw, 1999b), WAIS Comprehension subtest (Hess, 1974), and SCL-90-R (Olsen, Mortenson, & Bech, 2006). Half of the persons contacted volunteered for the study. There was no difference in rate of volunteering between a standard no-feedback condition and a feedback condition; the latter, however, tended to attract more psychologically resourceful persons. The employed persons tended to appear healthier than the not employed. Response style of the subjects, quality of the Rorschach protocols, reliability of scoring, and the effect of the data being grouped on geographical area and examiner were examined. Form level, color, texture, cooperative movement, and EA were lower than in the Comprehensive System (CS; n = 450) sample, but higher than in nine international nonpatient Rorschach studies. Unique for the Danish sample was a low number of animal movement answers. The Rorschach data showed women to be healthier than men. Differences in Rorschach variables based on educational level were small.

Rorschach Comprehensive System data for a sample of 52 older adult nonpatients from the United States.

PubMed

Pertchik, Kevin; Shaffer, Thomas W; Erdberg, Philip; Margolin, David Ira

2007-01-01

This study is composed of 52 older adults, ages 60 to 80, all from the United States. In addition to being administered the Rorschach (Rorschach, 1942), all participants also were administered the Wechsler Adult Intelligence Scale-Revised (WAIS-R; Weschler, 1981), the Minnesota Multiphasic Personality Inventory-2 (MMPI-2; Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989), the Neuro Cognitive Status Examination (NCSE; Kiernan, Mueller, Langston, & Van Dyke, 1987), and the Trail Making Test Part B (Reitan, 1958; Reitan & Wolfson, 1993). Examiners included the principal author as well as three other trained examiners. Inclusion criteria are described. Interrater reliability statistics at the response level are presented along with scores for the Rorschach Comprehensive System (CS; Exner, 1995).

Hemispheric resource limitations in comprehending ambiguous pictures.

PubMed

White, H; Minor, S W

1990-03-01

Ambiguous pictures (Roschach inkblots) were lateralized for 100 msec vs. 200 msec to the right and left hemispheres (RH and LH) of 32 normal right-handed males who determined which of two previously presented words (an accurate or inaccurate one) better described the inkblot. Over the first 32 trials, subjects receiving each stimulus exposure duration were less accurate when the hemisphere receiving the stimulus also controlled the hand used to register a keypress response (RH-left hand and LH-right hand trials) than when hemispheric resources were shared, i.e., when one hemisphere controlled stimulus processing and the other controlled response programming. These differences were eliminated when the 32 trials were repeated.

Seeing red: affect modulation and chromatic color responses on the Rorschach.

PubMed

Malone, Johanna C; Stein, Michelle B; Slavin-Mulford, Jenelle; Bello, Iruma; Sinclair, S Justin; Blais, Mark A

2013-01-01

Psychoanalytic theories suggest that color perception on the Rorschach relates to affective modulation. However, this idea has minimal empirical support. Using a clinical sample, the authors explored the cognitive and clinical correlates of Rorschach color determinants and differences among four affective modulation subtypes: Controlled, Balanced, Under-Controlled, and Flooded. Subtypes were differentiated by measures of affective regulation, reality testing/confusion, and personality traits. Initial support for the relationship of chromatic color response styles and affective modulation was found.

Degree of body weight in obesity and Rorschach personality aspects of mental distress.

PubMed

Elfhag, K; Rössner, S; Carlsson, A M

2004-03-01

To study the relationship between degree of obesity and personality measures of mental distress. The Rorschach method (Comprehensive System) and the Beck Depression Inventory. General descriptors were also included. Participants were 120 obese patients with a mean body mass index (BMI) of 41 (+/- SD 6) kg/m2. Depression, stress or psychopathology such as distortions in perception and cognitions were not related to the degree of obesity. Body concern and body-related anxiety (An+Xy) were more common in relatively lower degrees of obesity. According to general descriptors heavier patients had lower educational and socio-economic level, and more bodily pain problems. Depression was not related to body weight, in spite of findings of more depression in obesity compared to normal weights. Other factors than severity of obesity would account for the mental distress in obese patients. The differences in body concern and anxiety in varying degrees of obesity could be related to the social and educational context, where attitudes toward obesity differ. Less Rorschach signs of body concern in the morbidly obese contrasted with more self-reported bodily pain problems.

The Comparison of Iranian Normative Reference Data with Five Countries ‎Across Variables in Eight Rorschach Comprehensive System (CS) Clusters

PubMed Central

Hosseininasab, Abufazel; Mohammadi, Mohammadreza; Jouzi, Samira; Esmaeilinasab, Maryam; Delavar, Ali

2016-01-01

Objective: This study aimed to provide a normative study documenting how 114 five-seven year-old non-‎patient Iranian children respond to the Rorschach test. We compared this especial sample to ‎international normative reference values for the Comprehensive System (CS).‎ Method: One hundred fourteen 5- 7- year-old non-patient Iranian children were recruited from public ‎schools. Using five child and adolescent samples from five countries, we compared Iranian ‎Normative Reference Data- based on reference means and standard deviations for each sample.‎ Results: Findings revealed that how the scores in each sample were distributed and how the samples were ‎compared across variables in eight Rorschach Comprehensive System (CS) clusters. We reported ‎all descriptive statistics such as reference mean and standard deviation for all variables.‎ Conclusion: Iranian clinicians could rely on country specific or “local norms” when assessing children. We ‎discourage Iranian clinicians to use many CS scores to make nomothetic, score-based inferences ‎about psychopathology in children and adolescents.‎ PMID:27928247

A Rorschach investigation of defensiveness, self-perception, interpersonal relations, and affective states in incarcerated pedophiles.

PubMed

Bridges, M R; Wilson, J S; Gacono, C B

1998-04-01

Rorschach protocols of 60 incarcerated men who met the Diagnostic and Statistical Manual of Mental Disorders (4th ed. [DSM-IV]; American Psychiatric Association, 1994) criteria for Pedophilia were compared to those of 60 incarcerated men with no history of sex offenses (matched for age, education, and race). Comprehensive System Rorschach variables (Exner, 1991) were selected based on both psychodynamic and cognitive-behavioral models of pedophilia. Pedophiles' Rorschachs (a) contained significantly more responses and were more likely to reveal signs of (b) anxiety and helplessness, (c) painful introspection, (d) distorted views of others, and (e) primitive dependency needs than the comparison group's Rorschachs. Like other incarcerated men, the pedophiles exhibited disturbances in self-worth (either poor self-esteem or excessive self-focus), tendencies to abuse fantasy and avoid emotionally tinged stimuli, and chronic oppositionality and hostility. Pedophiles possess many core personality features associated with Narcissistic Personality Disorders, but are less well defended against feelings of vulnerability and painful introspection than other incarcerated men. Like Antisocial Personality Disorder patients (Gacono & Meloy, 1994), our pedophiles and nonpedophile offenders showed signs of impaired attachment and, in the context of incarceration, failed narcissism.

The role of verbalization in the Rorschach response process: a review.

PubMed

Gold, J M

1987-01-01

Traditional Rorschach theory has consistently overlooked the linguistic aspect of the response process. Most conceptualizations focus on the perceptual and cognitive aspects of the process, never examining the subject's need to find a linguistic representation for the inner, perceptual process. This review examines the traditional formulations and suggests that new research from information-processing, neuropsychological, and dual-coding memory theory paradigms offer new possibilities for Rorschach research that would incorporate an appreciation of the unique cognitive demand of the test--the linking of percept with language.

Clinical utility of the Rorschach with African Americans.

PubMed

Presley, G; Smith, C; Hilsenroth, M; Exner, J

2001-12-01

In this study we sought to identify Rorschach differences between African Americans and White Americans and to understand these differences within a social and cultural framework. Data from the Exner (1993) Comprehensive System normative sample (N = 700) was used to form a group of 44 African Americans and 44 White Americans matched for age, sex, education, and socioeconomic status. Twenty-three Rorschach variables were chosen a priori and group differences were analyzed. The only clinically significant difference found was that African Americans offered significantly less cooperative movement. This lower frequency of cooperative movement may suggest African Americans do not anticipate cooperative interactions with others as a routine event. This may reflect a shared feeling among African Americans that most members of our society are less likely to be sensitive to or responsive to their needs relative to others. However, the study demonstrates a striking similarity between the groups, supporting the clinical use of the Rorschach with African Americans.

Rorschach missing responses--is this more than nothing?

PubMed

King, M G

2014-01-01

The Rorschach has been demonstrated as a suitable tool for investigating otherwise hidden psychological aspects of sex offenders: sex-related responses are more common. The present paper looks at the established tendency of some clients to minimise their overall Rorschach responding, the linking of this response restraint to particular Rorschach profiles, and the sparse but consistent literature which casts doubt on the proposition that Examiner enthusiasm will cause the minimising client to provide more responses which divulge additional information. In the case of sex offenders, with so much to hide, it is proposed that there may be extensive filtering of responses even among those giving more than "normal" sex-related responses. "What the client did not say", and the corresponding "missing" Rorschach responses in the case of sex offenders is discussed in the light of an individual case: (a sex offender with undue interest in young boys' penii) where "sex-like" images were specifically targeted, but never named as such. The exciting prospect of inferring what the client could have said and thus generating the content of missing responses, whether or not response filtering produced numerical minimisation, must be balanced against the risk of naked men and women (and their genitalia) representing nothing more than an artefact of the clinician's own making--"ce qui n' est pas le cas".

The Rorschach test and Gilles de la Tourette's syndrome: a pilot case-control study.

PubMed

Balottin, Umberto; Rossi, Maura; Rossi, Giorgio; Viganò, Lucia; Nanti, Marta; Salini, Silvia; Lanzi, Giovanni; Termine, Cristiano

2009-10-01

To date only three studies, all lacking a control group, have investigated the personality style underlying tic disorders or Tourette's syndrome (TS), using the projective Rorschach test. Despite the recent controversy about its proper use in clinical practice and research, the Rorschach test may be useful to explore personality organization in TS. The research hypothesis under investigation in this exploratory study was that young TS patients exhibit a peculiar personality organization, with significantly increased indicators of poor emotional control, aggression, anxiety and depression, on the Rorschach test, compared to healthy controls. We analyed the Rorschach protocols of 17 newly diagnosed paediatric TS patients and 17 age- and sex-matched healthy controls. Compared with the controls young TS patients recorded significantly lower mean percentages of F and F+ responses and a significantly higher number of FM and FC responses, thus showing reduced control of emotions and difficulty in integrating aggressivity. Furthermore, associations emerged between comorbidity with ADHD and increased emotional instability and between severity of tics and of OCD and a pattern of emotional hyper-control and application of rigid defensive mechanisms. These results seem to confirm the existence of a peculiar personality style in young TS patients and may have important implications, both pathogenetic and therapeutic.

Influence of Examiner Differences on Rorschach Productivity in Children

ERIC Educational Resources Information Center

Tuma, June M.; McCraw, Ronald K.

1975-01-01

Rorschach test protocols for a matched sample of male and female subjects, in the child and adolescent range, were scored for total responses. The data was analyzed for evidence of interactions between sex of experimenter and sex and age of subject. (Author/BJG)

More challenges since Wikipedia: the effects of exposure to internet information about the Rorschach on selected comprehensive system variables.

PubMed

Schultz, Douglas S; Brabender, Virginia M

2013-01-01

To determine the effects of reading the Wikipedia article on the Rorschach on Comprehensive System variables, participants in this study (recruited from parent-teacher associations, online message boards, and graduate schools; N = 50) were provided with either a copy of the Wikipedia article on the Rorschach (from April 2010) or an irrelevant article, then administered the Rorschach and instructed to "fake good." Monetary incentives were used to increase motivation to dissimulate. Initial results indicated that participants given the Wikipedia article produced a lower number of responses (R) and had higher scores on Populars, X+%, XA%, and WDA% as compared to controls. However, post-hoc analyses revealed that when the influence of Populars was controlled, significant differences for X+%, XA%, and WDA% disappeared. No significant differences were found for Form%, Zf, Blends, or PER, although post-hoc analyses controlling for differences in R revealed a significant difference between groups on Zf%. Limitations of the study and implications for clinical and forensic practice are discussed.

Differentiating psychotic patients from nonpsychotic patients with the MMPI-2 and Rorschach.

PubMed

Dao, Tam K; Prevatt, Frances; Horne, Heather Leveta

2008-01-01

The goal of this study was to examine the incremental validity and the clinical utility of the Minnesota Multiphasic Personality Inventory-2 (MMPI-2; (Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989) and Rorschach (Rorschach, 1942) with regard to differential diagnosis in a sample of adult inpatients with a primary psychotic disorder or a primary mood disorder without psychotic features. Diagnostic efficiency statistics have suggested that the Rorschach Perceptual Thinking Index (PTI; Exner, 2000a, 2000b) was better than MMPI-2 scales in discriminating psychotic patients from nonpsychotic patients. We compared the 84% overall correct classification rate (OCC) for the PTI to an OCC of 70% for the MMPI-2 scales. Adding the MMPI-2 scales to the PTI resulted in a decrease in OCC of 1%, whereas adding the PTI to the MMPI-2 resulted in an increase in OCC of 14%. Sensitivity, specificity, positive predictive power, negative predictive power, and kappa were equal or higher with only the PTI in the model.

Rorschach cognitive developmental indices of mentally retarded persons: a comparison with scores on Wechsler Intelligence Scale for children-revised.

PubMed

Di Nuovo, S F; Colucci, G; Pellicciotta, A; Buono, S

1997-08-01

In a sample of 55 mentally retarded subjects (M age = 14 yr., 1 mo.) the relations between some perceptual and cognitive Rorschach indices, including the Becker's Genetic Level Score, and Wechsler Scale scores were studied. The mean Developmental Score did not increase across ages and was higher for girls than for boys, while Verbal and Performance IQs were lower for girls. The correlations confirm the hypothesis that for mentally retarded persons WISC-R scaled scores and Rorschach cognitive indices are different measures of intellective functioning. The findings are discussed with reference to the assessment and rehabilitation of retarded subjects.

Perceptual Development on the Rorschach

ERIC Educational Resources Information Center

O'Neill, Patrick; And Others

1976-01-01

The Rorschach was given to 60 school children in two designs: chronological age (CA) and mental age (MA) orthogonal and CA=MA. Responses were scored for Form Accuracy, Complexity, Movement and Friedman's Developmental Level (DL) Scoring System. The results suggest that the DL system does assess MA independently of CA. (Author/DEP)

Self-reported attachment patterns and Rorschach-related scores of ego boundary, defensive processes, and thinking disorders.

PubMed

Berant, Ety; Wald, Yaarit

2009-07-01

In this study, we addressed associations between self-reported attachment scales (anxiety and avoidance) and Rorschach (1921/1942) indexes indicating ego-boundary perception (barrier and penetration), use of projective identification, devaluation and splitting defenses, and Comprehensive System (Exner, 2005) scores that represent boundary blurring (incongruous and fabulized combinations). In this study, we extended the sample and findings described by Berant, Mikulincer, Shaver, and Segal (2005) using a nonclinical sample of 89 Israeli adults. We found significant associations between attachment orientations and Rorschach indexes dynamically related to anxiety. We also found a trend toward association between attachment orientation and avoidance. We discuss the theoretical and clinical implications of these findings.

Are Rorschach Responses Influenced by Society's Change?

ERIC Educational Resources Information Center

Ames, Louise Bates

1975-01-01

Based on the general belief that people "normally" see male figures on Rorschach Card III and females on Card VII; to see the opposite, according to some, would indicate a confusing of sex roles. This study makes two comparisons: age and time changes of individual responses to these cards in different decades. (DEP)

The Relationship of Culture Value Orientation Change and Rorschach Indices of Psychological Development

ERIC Educational Resources Information Center

Papajohn, John C.; Spiegel, John P.

1971-01-01

The relationship of culture value orientation change and Rorschach indices of psychological development was investigated using a sample of second-generation Greek-Americans undergoing the acculturation process by comparing the families with psychotic member with a matched group of families in which there was no history of psychopathology. (JM)

Rorschach Comprehensive System data for a sample of 190 Japanese nonpatient children at five ages.

PubMed

Matsumoto, Mariko; Suzuki, Nobuko; Shirai, Hiromi; Nakabayashi, Mutsumi

2007-01-01

This study is a part of our series of studies of nonpatient, Japanese children. In total, 346 children were administered the Rorschach. Thirty-two children had fewer than 10 responses, 112 children had more than 10 but fewer than 14 responses, and 12 children were maladjusted or mentally retarded, for a total of 156. In this study, we analyzed the remaining 190 children not excluded by the above criteria in the following age groups: 5 years (n = 24), 8 years (n = 43), 9 years (n = 42), 12 years (n = 42), and 14 years (n = 39). Japanese children showed few responses generally, with an average of 18 ~ 20 responses. In addition to having fewer responses, other features of Japanese children are high Lambda, low EA, very high X-%, and low X+%. The fact that the Rorschach test depends on verbal expression may be one factor in all these features, and we should consider this study in view of these Japanese cultural factors. Interrater reliability findings and Rorschach Comprehensive System (CS; Exner, 1995; Matsumoto, 2003; Matsumoto et al., 2002) data are presented.

A Survey of Rorschach Teaching in APA-Approved Clinical Graduate Programs

ERIC Educational Resources Information Center

Del Gaudio, Andrew C.; Ritzler, Barry A.

1976-01-01

This survey of APA-approved doctoral programs in clinical psychology provides a status assessment of the Rorschach technique. Eighty-one percent emphasized the technique; a quarter offered the course for a full year; respondents with more experience rated the technique higher; and its was rated highly as a clinical tool and teaching aid, but low…

The Validity of Individual Rorschach Variables: Systematic Reviews and Meta-Analyses of the Comprehensive System

ERIC Educational Resources Information Center

Mihura, Joni L.; Meyer, Gregory J.; Dumitrascu, Nicolae; Bombel, George

2013-01-01

We systematically evaluated the peer-reviewed Rorschach validity literature for the 65 main variables in the popular Comprehensive System (CS). Across 53 meta-analyses examining variables against externally assessed criteria (e.g., observer ratings, psychiatric diagnosis), the mean validity was r = 0.27 (k = 770) as compared to r = 0.08 (k = 386)…

[Self-esteem and giftedness: a Rorschach Comprehensive System study].

PubMed

Kostogianni, N; Andronikof, A

2014-02-01

According to empirical literature, low self-esteem is highly correlated to behavioural and emotional problems in gifted children and adolescents. Since self-esteem is an indicator of social and emotional adjustment, it would be interesting to better understand the meaning of this construct, as it is evaluated explicitly with the use of self-report questionnaires. In order to explore the psychological processes underlying the explicit self-esteem, we studied the relation of a self-report questionnaire and an indirect measure of self and interpersonal perception using the Rorschach Comprehensive System (CS). The participants were 93 children, aged between 9 and 15 years old, with an IQ≥130. They were attending regular classes (no curriculum difference). Self-esteem was evaluated using the Coopersmith Self-Esteem Inventory (SEI). We used the Rorschach CS measures of self and interpersonal perception. The results showed no significant correlation between self-esteem and high IQ. A negative correlation between self-esteem evaluated on the SEI and the Rorschach Vista responses was found, which reflected self-critical introspection and painful self-appraisal. Then a positive correlation was observed between self-esteem and reflection answers on the Rorschach (Fr+rF>0), which are related to narcissistic-like features of personality. We also found a positive correlation between self-esteem and the Rorschach egocentricity index (EGO), which provides an estimate of self-concern. Finally, the strongest correlation was found between self-esteem and the dominance of good over poor human representations (GHR>PHR), which reveals effective interpersonal behaviour. The psychological processes which seem to be related to low self-esteem in gifted children and adolescents are maladaptive interpersonal behaviours, painful experience of introspection focusing on perceived negative aspects of the self, absence of narcissistic-like features of the personality and low self-concern. These findings may suggest that intervention planning with gifted children and adolescents with low self-esteem should emphasize the accurate interpretation of interpersonal data, develop social skills and restructure negative self-thoughts. Copyright © 2013 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Rorschach oral dependency in psychopaths, sexual homicide perpetrators, and nonviolent pedophiles.

PubMed

Huprich, Steven K; Gacono, Carl B; Schneider, Robert B; Bridges, Michael R

2004-01-01

Rorschach Oral Dependency scores (Masling, Rabie, & Blondheim, 1967) were compared among nonsexually offending psychopaths (NSOPs, n = 32), sexual homicide perpetrators (SHPs, n = 38), and non-violent pedophiles (NVPs, n = 39) as initially reported by Gacono, Meloy, and Bridges (2000). The aggressive special scores of Gacono and Meloy (1994; Gacono, unpublished doctoral dissertation, 1998) were also scored and compared with ROD scores. Consistent with theory and predictions, NVPs were found to have significantly higher levels of oral dependency scores than NSOPs or SHPs. Additionally, there was a high degree of association between oral dependency and aggression in the SHP and NSOP groups. These Rorschach differences support the validity of the ROD as an implicit measure of dependency and add to the understanding of the dynamics that fuel sexually deviant violence. Copyright 2004 John Wiley & Sons, Ltd.

Potential Projective Material on the Rorschach: Comparing Comprehensive System Protocols to Their Modeled R-Optimized Administration Counterparts.

PubMed

Pianowski, Giselle; Meyer, Gregory J; Villemor-Amaral, Anna Elisa de

2016-01-01

Exner ( 1989 ) and Weiner ( 2003 ) identified 3 types of Rorschach codes that are most likely to contain personally relevant projective material: Distortions, Movement, and Embellishments. We examine how often these types of codes occur in normative data and whether their frequency changes for the 1st, 2nd, 3rd, 4th, or last response to a card. We also examine the impact on these variables of the Rorschach Performance Assessment System's (R-PAS) statistical modeling procedures that convert the distribution of responses (R) from Comprehensive System (CS) administered protocols to match the distribution of R found in protocols obtained using R-optimized administration guidelines. In 2 normative reference databases, the results indicated that about 40% of responses (M = 39.25) have 1 type of code, 15% have 2 types, and 1.5% have all 3 types, with frequencies not changing by response number. In addition, there were no mean differences in the original CS and R-optimized modeled records (M Cohen's d = -0.04 in both databases). When considered alongside findings showing minimal differences between the protocols of people randomly assigned to CS or R-optimized administration, the data suggest R-optimized administration should not alter the extent to which potential projective material is present in a Rorschach protocol.

Extrasensory Perception Experiences and Childhood Trauma: A Rorschach Investigation.

PubMed

Scimeca, Giuseppe; Bruno, Antonio; Pandolfo, Gianluca; La Ciura, Giulia; Zoccali, Rocco A; Muscatello, Maria R A

2015-11-01

This study investigated whether people who report recurrent extrasensory perception (ESP) experiences (telepathy, clairvoyance, and precognition) have suffered more traumatic experiences and traumatic intrusions. Thirty-one nonclinical participants reporting recurrent ESP experiences were compared with a nonclinical sample of 31 individuals who did not report recurrent ESP phenomena. Past traumatic experiences were assessed via a self-report measure of trauma history (Childhood Trauma Questionnaire); traumatic intrusions were assessed via a performance-based personality measure (Rorschach Traumatic Content Index). Participants also completed the Anomalous Experience Inventory, the Minnesota Multiphasic Personality Inventory-2, the Dissociative Experience Scale, and the Revised Paranormal Belief Scale. The ESP group reported higher levels of emotional abuse, sexual abuse, emotional neglect, physical neglect, and traumatic intrusions. The association between ESP experiences and trauma was partly mediated by the effects of dissociation and emotional distress. Implications for health professionals are discussed. Results also showed the reliability of the twofold method of assessment of trauma.

A Rorschach comparison of psychopaths, sexual homicide perpetrators, and nonviolent pedophiles: where angels fear to tread.

PubMed

Gacono, C B; Meloy, J R; Bridges, M R

2000-06-01

Nonsexually offending psychopaths (N = 32) were compared to sexual homicide perpetrators (N = 38) and nonviolent pedophiles (N = 39) on select Comprehensive System Rorschach variables (Exner et al., 1993). Results indicate similarities among the groups in pathological narcissism, formal thought disorder, and borderline level reality testing. Nonsexually offending psychopaths are distinguished by their lack of interest in and attachment to others and their seemingly conflict-free internal world. While both sexually deviant groups evidenced interest in others and appear to experience a very dysphoric internal world, the sexual homicide perpetrators are distinguished by high levels of obsessional thought and an inability to disengage from environmental stimuli. Pedophiles show significantly more characterological anger, which may stem from their general inadequacy, cognitive rigidness, less alloplastic (acting out) style, and their introversive inability to gratify their needs. Rorschach differences add to our understanding of sexual deviation and violence among these three groups.

The Rorschach texture response: a construct validation study using attachment theory.

PubMed

Cassella, Michael J; Viglione, Donald J

2009-11-01

Using attachment theory, in this research, we explored the construct validity of the Rorschach (Exner, 1974) Texture (T) response as a measure of interpersonal closeness and contact. A total of 40 men and 39 women completed the Rorschach and 2 attachment inventories. Their romantic partners also completed an informant version of the attachment measures. Attachment styles were measured by factor scores involving both self-report and partner report. Results indicate that attachment theory, as a broad conceptual framework, is associated with T. Specifically, T = 1 is most closely associated with a secure attachment style, T > 1 with aspects of the preoccupied style, and T = 0 with aspects of the avoidant style and an absence of secure attachment. Needs for closeness and contact associated with T can be couched within an adult attachment theory, but in this study, we did not test for problematic aspects of insecure attachment. Gender is a complicating factor and deserves more study.

The effect of color on the production of responses to Rorschach cards VIII, IX, and X in age groups of 11-12 and 15-16 years.

PubMed

Silva, Danilo R; Ferreira, Ana Sousa

2014-01-01

The effect of color on the production of responses to the Rorschach task has been considered by investigators from 2 different positions: (a) that color has little effect on the production of responses, and (b) that color increases the number of responses. Some previous results found by the current investigators have supported the first position for the last 3 fully colored Rorschach cards (VIII, IX, and X), in children from 5 to 12 years old. Other studies of ours, however, have confirmed the second position for these same cards with a group of young adults 17 to 23 years old. As there was no increase of responses up to age 12, for this study we hypothesized a developmental effect in adolescence such that there would be an increase in the production of responses to the colored Rorschach cards at the age of 15 to 16 years, and this is what the results indicate. From a pragmatic standpoint, these results imply a revision of interpretive meaning for the Color and Affective Ratio variables in children's protocols. Our results also indicate that color cannot be regarded as a means of expression of affect at age 11 to 12 like it will be from age 15 to 16 and on.

Personality Dimensions as Assessed by Projective and Verbal Instruments

ERIC Educational Resources Information Center

Rimoldi, H. J.; And Others

1975-01-01

This study aimed to define personality dimensions when assessed by projective and verbal instruments. The Holtzman Inkblot Test was selected to represent projective tests. The 18 scales of the California Personality Inventory (CPI) and the Rokeach Dogmatism Scale (RDS) were the objective tests used. (Author/RK)

Personality and symptom change in treatment-refractory inpatients: evaluation of the phase model of change using Rorschach,TAT, and DSM-IV Axis V.

PubMed

Fowler, J Christopher; Ackerman, Steven J; Speanburg, Stefanie; Bailey, Adrian; Blagys, Matthew; Conklin, Adam C

2004-12-01

In this study, we examined global treatment outcomes during 16 months of intensive, psychodynamic treatment for 77 inpatients suffering from treatment-refractory disorders. Hypotheses based on the phase model of treatment change (Howard, Lueger, Maling, & Martinovich, 1993; Howard, Moras, Brill, Martinovich, & Lutz, 1996) were supported in the study results. Diagnostic and Statistical Manual of Mental Disorders (4th ed.; American Psychiatric Association, 1994) Axis V scales assessing behavioral functioning demonstrated large and medium effect size change, whereas stable, enduring personality functioning assessed by psychoanalytic Rorschach scales and the Social Cognition and Object Relations Scale (Westen, 1995) for the Thematic Apperception Test (Murray, 1943) demonstrated small and medium effect size change. We also report assessment of reliable change index and clinical significance. The ecological validity of Rorschach measures is supported by significant validity coefficients (in the hypothesized directions) between implicit measures of personality functioning and behavioral ratings.

[Utilizing the Rorschach Test in the diagnosis of gender identity disorder and in the evaluation of eligibility for sex reassignment surgery].

PubMed

Affatati, Valeria; Grattagliano, Ignazio; Todarello, Orlando; Catanesi, Roberto

2012-01-01

Gender identity disorder (GID) is a mental disorder in which gender identity is incongruent with the anatomical sex, in the absence of any clear and defined genetic or biological alteration. The diagnosis of GID as well as the assessment of patient eligibility for sex reassignment surgery (SRS) are prerequisite to the legal recognition procedure. The aim of this study was to evaluate the usefulness of the Rorschach test in differential diagnosis determination and primarily in providing information on patient eligibility for SRS, in the framework of the clinical, therapeutic and forensic psychometric and psychodiagnostic assessment, and according to the World Professional Association for Transgender Health (WPATH) criteria. For this purpose we analysed the Rorschach test of 47 patients (33 GID and 14 GID NAS). Results show that GID NAS patients have greater difficulties in stress control and less adaptability, which could lead to disorganisation, impulsiveness, behavioural disorders, as well as higher levels of situational and chronic stress, with altered thought patterns and uncontrolled ideation, a higher frequency of thought disorders and disturbed relations, with lower quality and less adaptive interpersonal relationships, which are characterized by dependency and aggressive behaviours. This research shows that the Rorschach test cannot be used alone in the determination of the differential diagnosis between GID and GID NAS in the diagnosis and evaluation of patient eligibility for SRS, especially when comparing groups which do not shows significant differences in the prevalence of the main psychopathological disorders.

A commentary on Adolf Eichmann's Rorschach.

PubMed

McCully, R S

1980-06-01

A Rorschach was administered to Adolf Eichmann in Jerusalem in 1961 at the time of his trial for war crimes. The recent publication of this protocol offers an opportunity to compare his personal world against opinions formed about him by observers at his trial. Various professionals certified Eichmann as a banal, ordinary man, and a societal theory was proposed about Nazism based in part on impressions of Eichmann as an uncomplicated man. This commentary examines Eichmann's protocol and provides an opinion that in several important respects his record includes features uncharacteristic of an ordinary, banal mind.

[The elaboration of aggressiveness in adolescence: Comparative structural study based on the Rorschach test].

PubMed

Schiltz, L; Diwo, R; de Tychey, C

2015-09-01

In adolescence, a component of a successful identity quest consists in elaborating the aggressiveness, be it endured or acted out, in an imaginary and symbolic manner. We will present a comparative study between anxious and violent adolescents, based on the Rorschach test. As the handling of aggressiveness by means of various defense mechanisms and coping strategies contributes to the construction of a sense of reality and of coherent representations of oneself and the others, the Rorschach test is a pertinent tool to study the vicissitudes of the identity quest of medium adolescence. On the other hand, many studies demonstrate that it is also a precious tool allowing diagnosis of the risks of evolution towards character pathology and personality disorders belonging to cluster B of the DSM, or towards emotional disorders and suicidal tendencies. Thus, it can help initiating appropriate therapeutic measures in a spirit of tertiary prevention. We present a comparative study between a sample of 20 adolescents suffering from anxiety and inhibition of aggressiveness (subgroup anxiety) and a second sample of 20 adolescents suffering from exteriorized aggressiveness and violent behavior (subgroup violence). The inclusion into the subgroups was based on clinical interviews and a thorough psychological assessment, using the criteria of categorical psychopathology. The comparative study between the two subgroups is based on an original rating scale constructed in the phenomenological and structural tradition, reflecting the global judgment of the experienced clinical psychologist. It permits using the Rorschach test as a research tool by making the step from qualitative analysis towards quantification and the use of inferential and multidimensional statistics. It also allows computing correlations between the Rorschach test and psychometric scales or other projective tests, using specific rating scales of the same type. After showing the descriptive demographic data, we present the results of the comparative between groups study (computed by means of Mann-Whitney's U test) and those of the multidimensional study (computed by means of the optimal scaling procedure HOMALS). The comparative study indicates that, with adolescents suffering from anxiety and inhibition, the emotional and relational needs are much greater, as is the tendency to direct one's aggressiveness against one self. Mentalization, documented by the richness, the originality, the level of integration and the maturity of associations is better developed in this subgroup. In the subgroup of adolescents characterized by exteriorized aggressiveness and violent behavior, the ambiguity of the stimulus causes perplexity, slowing down executive functions. The latent dimensions, extracted with the help of optimal scaling procedures, are meaningful at the light of current clinical psychology and create a typology of the adjustment to aggressive drives. They tend to illustrate the pertinence of the rating scale as a research tool and contribute in demonstrating its construct validity. The data of the comparative and multidimensional study are discussed in relationship with open questions in developmental and clinical psychology of adolescence. They highlight the role of the Rorschach test as a means to differentiate between temporary and long-term difficulties related to aggressiveness, as well as to show similarities and differences at the structural level of personality functioning between subgroups with interiorized and exteriorized aggressiveness. The psychological meaning of the latent dimensions, extracted with the help of optimal scaling techniques, are discussed in light of the recent research literature. Rorschach profiles can help indicate risks of evolution towards personality pathology at adult age. Let us stress that our latent dimensions are not focused on aggressiveness itself but rather on control functions liable to modulate its expression. Using the Rorschach test in pretest and posttest situation and exploring the change occurring during the psychotherapeutic interventions with the help of the rating scale (application of optimal scaling on Delta values) could open interesting tracks for future research in the realm of outcome and process evaluation of psychotherapies. Copyright © 2014 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Personality and Psychiatric Disorders in Women Affected by Polycystic Ovary Syndrome

PubMed Central

Scaruffi, Elisabetta; Gambineri, Alessandra; Cattaneo, Stefania; Turra, Jenni; Vettor, Roberto; Mioni, Roberto

2014-01-01

Background: Polycystic ovary syndrome (PCOS) is the most prevalent endocrine disorder among fertile women. Studies show reduced quality of life, anxiety, depression, body dissatisfaction, eating disorder, and sexual dysfunction, but the etiology of these disturbs remains still debated. The aim of our study is to verify whether this hyperandrogenic syndrome characterizes a strong psycho(patho)logical personality. Method: Sixty PCOS subjects (mean age 25.8 ± 4.7 years) were evaluated by anthropometric, metabolic, hormonal, clinical, and psychological parameters. After the certainty of the diagnosis of PCOS, the Rorschach test, according to Exner’s comprehensive system (CS) and the Millon Clinical Multiaxial Inventory-III (MCMI-III) were administered to each patient. The control group, on which the comparison was carried out, was composed by 40 healthy and aged compared women who were exclusively administered the Rorschach test according to CS. Results: MCMI-III evidenced axis II DSM-IV personality disorders [4.1% schizoid, depressive, sadistic, negativistic (passive–aggressive), and masochistic, 6.1% avoiding, 12.2% dependent, 20.4% histrionic, 16.3% narcissistic, 2.0% obsessive–compulsive], and axis I DSM-IV psychiatric disorders: 10.2% anxiety, 2.0% somatoform disorder and bipolar disorder, 16.3% major depressive disorder. Finally, we found 44.9% delusional disorder and 4.1% thought disorder. Rorschach test’s results show 53.1% reduced coping abilities and social skills, 55.1% depression, 30.6% perceptual distortion and cognitive slippage, 24.5% constantly alert and worry, 8.1% at risk for suicide, and finally about 50% of our patients had chronic stress. Conclusion: PCOS women have relevant personality and psychiatric disorders, when compared with normal subjects. PMID:25429283

An empirical study of Freud's penis-baby equation.

PubMed

Jones, R L

1994-03-01

One hypothesis of traditional psychoanalytic theory holds that a cardinal aspect of the "natural" development of femininity involves the woman's substitution of the wish for a baby in place of her original wish for a penis. The current study modified and extended earlier research examining the validity of Freud's this "penis-baby" theory. College-aged women and men were presented with either subliminal or supraliminal auditory messages concerned with either pregnancy or penetration themes. Subjects' written responses to Holtzman ink-blots, obtained both before and after exposure to an auditory message, were content-coded for phallic imagery and sexual imagery. Consistent with Freud's speculations about the phallic significance of pregnancy for women, female subjects who were exposed to the subliminal pregnancy message produced significantly more phallic imagery responses to ink-blots than did women in any of the other experimental conditions (p < .01). The phallic imagery production of males did not vary significantly as a function of message condition. Implications of these findings are discussed in the context of modern revisions to Freud's psychology of women and the current psychoanalytic conceptualization of penis envy as a highly condensed mental product with many layers of meaning.

Solomon design analysis of multiple-choice Rorschach animal content.

PubMed

Feigenbaum, D; Costello, R M

1975-10-01

The Solomon four-group design was used to study the effects of a persuasive message on a selected multiple-choice Rorschach index--animal content. The independent variable elicited behavior in a predictable manner. Pretesting as a main effect was not significant, but as an interactional effect obviated the effect of the persuasive message. Although knowledge of test rationale can elicit behavior that conforms to experimental demand characteristics, some subjects nonetheless acted in defiance of such information. A condition for defiance in this experimental arrangement, however, was pretesting. Other possibilities regarding the study of compliance behavior and the use of pathognomonic indicators were suggested. Ethical issues were raised.

Communication Deviance in parents of families with adoptees at a high or low risk of schizophrenia-spectrum disorders and its associations with attributes of the adoptee and the adoptive parents.

PubMed

Roisko, Riikka; Wahlberg, Karl-Erik; Hakko, Helinä; Wynne, Lyman; Tienari, Pekka

2011-01-30

Communication Deviance (CD) in rearing parents is a known indicator of a psychopathology risk in the offspring, but the direction of the effects of these two factors on each other has remained an unresolved question. The purpose of the present study was to clarify this issue by assessing the relationship of CD in adoptive parents with certain attributes of the adoptee and adoptive parents themselves. The subjects were 109 adoptees at a high or low risk of schizophrenia-spectrum disorders and their adoptive parents. Communication Deviance was measured in individual, spouse and family Rorschach situations. Thought disorders in the adoptees were assessed using the Thought Disorder Index. The variability of CD in the adoptive parents in individual Rorschach situations was not significantly explained by any characteristics of the child. The variability in parental CD in family Rorschach situations was most closely associated with the characteristics of the parents themselves. The results strongly support the hypotheses that the frequency of Communication Deviance is an enduring trait rather than a fluctuating state and that frequent CD in parent's speech may impair the growing child's cognitive development and predispose him/her to schizophrenia-spectrum disorders. Copyright © 2010 Elsevier Ltd. All rights reserved.

Antipsychotic treatment and the Rorschach Perceptual Thinking Index (PTI) in psychotic disorder patients: Effects of treatment.

PubMed

Biagiarelli, Mario; Curto, Martina; Di Pomponio, Ileana; Comparelli, Anna; Baldessarini, Ross J; Ferracuti, Stefano

2017-05-01

The Rorschach-based Perceptual Thinking Index (PTI) is used to identify and rate features of psychotic disorders, but effects of antipsychotic treatment on such ratings is not clear. Accordingly, we examined potential effects of antipsychotic drugs on PTI measures in 114 patients with a psychotic or bipolar-I disorder. Use and doses of antipsychotic drugs (as chlorpromazine-equivalent [CPZ-eq] mg/day) were unrelated to PTI total or subscale scores in any diagnostic group. PTI scores were independently and significantly associated with psychotic symptomatic severity (PANSS score) and less with female sex. These findings support the validity and value of the PTI in identifying features of psychosis even in the presence of antipsychotic treatment. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

On Conducting Construct Validity Meta-Analyses for the Rorschach: A Reply to Tibon Czopp and Zeligman (2016).

PubMed

Mihura, Joni L; Meyer, Gregory J; Dumitrascu, Nicolae; Bombel, George

2016-01-01

We respond to Tibon Czopp and Zeligman's (2016) critique of our systematic reviews and meta-analyses of 65 Rorschach Comprehensive System (CS) variables published in Psychological Bulletin (2013). The authors endorsed our supportive findings but critiqued the same methodology when used for the 13 unsupported variables. Unfortunately, their commentary was based on significant misunderstandings of our meta-analytic method and results, such as thinking we used introspectively assessed criteria in classifying levels of support and reporting only a subset of our externally assessed criteria. We systematically address their arguments that our construct label and criterion variable choices were inaccurate and, therefore, meta-analytic validity for these 13 CS variables was artificially low. For example, the authors created new construct labels for these variables that they called "the customary CS interpretation," but did not describe their methodology nor provide evidence that their labels would result in better validity than ours. They cite studies they believe we should have included; we explain how these studies did not fit our inclusion criteria and that including them would have actually reduced the relevant CS variables' meta-analytic validity. Ultimately, criticisms alone cannot change meta-analytic support from negative to positive; Tibon Czopp and Zeligman would need to conduct their own construct validity meta-analyses.

[The Rorschach's test for heroin addicts treated by methadone: from reality to imaginary].

PubMed

Deslandes, C; Gourarier, L; Sanchez, M; Lowenstein, W

2000-10-01

The aim of this study was to analyze the role of the imaginary and its link with reality among 30 subjects treated by methadone. The Rorschach test was proposed to 30 heroin addicts treated by methadone, over an average 7 months. The formal answers (used preferentially in the 30 results, though often inappropriately) and socializing landmarks involving considerable individual investment, we were able to identify two ways of working within the same protocol. The first relies most on conformity and adaptation and tries to put the imaginary aside. The second is a more projective, unorganized approach evidencing the influence of the imaginary. This specific imaginary activity could not be assimilated with the traditional "lack of fantasy" observed in heroin addicts. It would be interesting to examine the course of this approach over a longer period.

Concurrent validity of the Wheeler signs of homosexuality in the Rorschach: P (Ci/Rj).

PubMed

Stone, N M; Schneider, R E

1975-12-01

The Rorschach protocols of 43 males consecutively admitted to a university outpatient clinic were scored for frequency of the 20 Wheeler signs of homosexuality. Based on case history data, patients were assigned to homosexual, sex-role disturbed, or normal-control groups. In addition to the traditional group comparison the results were analyzed to yield P (Ci/Rj); that is, the probability of criterion group membership given test indicator. Both the homosexual and sex-role disturbed group displayed significantly more Wheeler signs than normals. Furthermore, given a Wheeler sign score of 15%, .75 of the predicted-homosexual group would be correctly classified compared to a .21 baserate prediction. It was suggested that expressing results as P (Ci/Rj) provides information more relevant to the clinician than is provided by the traditional practice of reporting significant differences between groups.

The affective dimension of response elicitation data: a projective measure.

PubMed

Tibon, S; Blumberg, H H

2000-03-01

In this research, the Rorschach Affective Ratio, a measure for frequency of response elicitation, was used to examine the affective dimension of response elicitation data. The purpose of this study was to apply the Rorschach Affective Ratio to an examination of the psychodynamic roots of political behavior. This measure compares the number of responses to colored cards, considered as emotional stimuli, with those revealed by the other (black and white) cards of the test. Israeli undergraduates (N = 26) completed a questionnaire composed of 20 questions about peace. Participants who were more supportive of the peace process in the Middle East were found to have a lower Affective Ratio than those who were less supportive. This result suggests that measurable affective aspects may be as important as cognitive aspects of response elicitation in understanding an individual's political attitudes.

Association between the Rorschach Ego Impairment Index and the Level of Personality Organization interview assessment in depressive and anxiety disorder patients.

PubMed

Valkonen, Harri; Lindfors, Olavi; Knekt, Paul

2012-12-30

The level of personality functioning, relevant for treatment planning, can be evaluated by the Rorschach Comprehensive System (CS) Ego Impairment Index-2 (EII-2) and by interview assessment of the severity of personality pathology. However, few studies on the association between these assessment methods have been reported. This study examines the strength of association between the EII-2 and its subcomponents with the interview-based Level of Personality Organization (LPO) assessment scale, and investigates their mutual associations with psychiatric symptoms, diagnoses, and history. Altogether, 315 mood or anxiety disorder outpatients without severe personality pathology were assessed with the LPO and tested with the CS, on which the EII-2 and its subcomponents (FQ-, WSum6, Critical contents, M-, PHR, GHR, and R) were calculated. Significant, but weak association between the EII-2 and the LPO was found. The WSum6, a measure of thought disorder, was the only EII-2 subcomponent significantly associated with the LPO. Both measures were consistently associated with psychiatric symptoms, diagnoses and history. The findings partially support the EII-2 and the LPO as consistently associated, relatively independent measures of the severity of personality pathology. More research on the incremental benefits of the measures is needed in clinical populations, covering non-severe and complex psychopathology. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Extending the Rorschach trauma content index and aggression indexes to dream narratives of children exposed to enduring violence: an exploratory study.

PubMed

Kamphuis, Jan H; Tuin, Nynke; Timmermans, Marieke; Punamäki, Raija-Leena

2008-11-01

In this study, we compared dream narratives of children and adolescents living under conditions of enduring interpersonal violence (n = 220) versus those living in peaceful surroundings (n = 99) on content variables that have been associated with traumatic experiences in Rorschach (Exner, 1995) imagery. As predicted, children and adolescents living in circumstances of enduring violence reported a higher proportion of content scorable by Armstrong and Loewenstein's (1990) Trauma Content Index and a much higher proportion of aggressive objects in their dreams (AgC; Gacono & Meloy, 1994). In support of discriminant validity, no consistent group differences were observed for the relative frequencies of Animal (A), Clothing (Cg), or Cooperative movement (COP) content. The modest association between manifest dream content and psychological symptom scales suggests that the former may alternatively reflect adaptive or psychopathological processes. Our findings suggest that content analysis of dreams may be a valuable adjunct in tapping the psychological state of children traumatized by violence.

Resiliency characteristics and Rorschach variables in children and adolescents with severe burns.

PubMed

Holaday, M; Terrell, D

1994-01-01

Three raters classified 40 children and adolescents (ages 8 to 19 years) with severe burns who were placed in two groups designated as Resilient (N = 28) and Nonresilient (N = 12). Nine hypothesized differences in Rorschach responding between groups were developed through a review of the literature and operationalized through descriptive statements from a rating scale now being developed. The Resilient group gave more Cooperative Movement responses than the Nonresilient group (p = 0.0270), and they were more likely to have D scores that were within the normal range (p = 0.0700). The Nonresilient group had lower Egocentricity Index scores than the Resilient group (p = 0.0368) and more often had a positive Coping Deficit Index (p = 0.1285). Texture, Diffuse Shading, and Passive: Active responses appeared similar between groups. Differences found concerning Experience Actual and Z frequency were not statistically significant. Possible interventions addressing the emotional needs of burned children and adolescents such as strengthening certain personality characteristics are noted.

Rorschach Measures of Cognition Relate to Everyday and Social Functioning in Schizophrenia

ERIC Educational Resources Information Center

Moore, Raeanne C.; Viglione, Donald J.; Rosenfarb, Irwin S.; Patterson, Thomas L.; Mausbach, Brent T.

2013-01-01

Neurocognitive impairment and negative symptoms contribute to functional disability in people with schizophrenia. Yet, a high level of unexplained variability remains after accounting for the role of these factors. This study examined the role of thought disorder, psychological complexity, and interpersonal representations, as measured by the…

The Predictive Validity of Projective Measures.

ERIC Educational Resources Information Center

Suinn, Richard M.; Oskamp, Stuart

Written for use by clinical practitioners as well as psychological researchers, this book surveys recent literature (1950-1965) on projective test validity by reviewing and critically evaluating studies which shed light on what may reliably be predicted from projective test results. Two major instruments are covered: the Rorschach and the Thematic…

Piagetian Cognitive Development and Primary Process Thinking in Children

ERIC Educational Resources Information Center

Wulach, James S.

1977-01-01

Thirty-seven middle-class white children, ages 5-8, were tested on eight Piagetian tasks and the Rorschach test, and divided into preoperational, transitional, and concrete operational groups. Measures of primary process vs. secondary process thinking were found to be related to the Piagetian stages of development. (GDC)

Attachment Style and Internet Addiction: An Online Survey

PubMed Central

Schott, Markus; Decker, Oliver; Sindelar, Brigitte

2017-01-01

Background One of the clinically relevant problems of Internet use is the phenomenon of Internet addiction. Considering the fact that there is ample evidence for the relationship between attachment style and substance abuse, it stands to reason that attachment theory can also make an important contribution to the understanding of the pathogenesis of Internet addiction. Objective The aim of this study was to examine people’s tendency toward pathological Internet usage in relation to their attachment style. Methods An online survey was conducted. Sociodemographic data, attachment style (Bielefeld questionnaire partnership expectations), symptoms of Internet addiction (scale for online addiction for adults), used Web-based services, and online relationship motives (Cyber Relationship Motive Scale, CRMS-D) were assessed. In order to confirm the findings, a study using the Rorschach test was also conducted. Results In total, 245 subjects were recruited. Participants with insecure attachment style showed a higher tendency to pathological Internet usage compared with securely attached participants. An ambivalent attachment style was particularly associated with pathological Internet usage. Escapist and social-compensatory motives played an important role for insecurely attached subjects. However, there were no significant effects with respect to Web-based services and apps used. Results of the analysis of the Rorschach protocol with 16 subjects corroborated these results. Users with pathological Internet use frequently showed signs of infantile relationship structures in the context of social groups. This refers to the results of the Web-based survey, in which interpersonal relationships were the result of an insecure attachment style. Conclusions Pathological Internet use was a function of insecure attachment and limited interpersonal relationships. PMID:28526662

[Use of the M.H.Q. test (Middlesex Hospital Questionnaire) in the diagnosis of neuroses].

PubMed

Cornia, C; Lorenzini, R

1977-05-19

A psychological interview and the MHQ, Koch, Rorschach, TAT, Machover and family design psychological tests were conducted in pneumopathic patients. The results obtained with the MHQ were compared with those of the other tests with respect to the diagnosis of psychoneurosis. A perfect fit was observed.

[Complicities and ambivalences of psychiatry: Münsterlingen and the 1954 feast of fools].

PubMed

Basso, Elisabetta

2017-01-01

In March 1954, Foucault visited the psychiatric asylum of Münsterlingen (Canton Thurgau), on the Swiss side of Lake Constance. Münsterlingen was the chosen place of activity for well-known psychiatrists, including Hermann Rorschach (1910-1913), and it became famous in the history of psychiatry especially through the work of Roland Kuhn, who was active in the asylum from 1939 to 1979. Kuhn was an expert in the Rorschach psycho-diagnostic test, as well as the discoverer of the first antidepressant in the early 1950s. He was also very close to Ludwig Binswanger, whose anthropological approach to mental illness had a strong influence on his own psychiatric practice. It is precisely in order to meet Kuhn and Binswanger that the young Foucault went to Switzerland, at a time when he was interested in philosophical anthropology and "existential psychopathology". Foucault's visit took place during the Carnival at the asylum, when the patients leave the hospital wearing the masks that they have made up and created. © 2017 médecine/sciences – Inserm.

Confirmatory research on the assessment of murderers.

PubMed

Piotrowski, C

1997-12-01

Prior research, from the psychodynamically oriented literature, characterizes homicidal offenders as impulsive, vulnerable to stress, with difficulties in emotional control, particularly anger. In 1995 Coram reported Rorschach data from a sample of murderers which tentatively support earlier findings. This paper argues that confirmatory data from measures which objectively assess emotional states and behaviors could elucidate this issue.

The Status of Psychological Testing in Clinical Psychology: Relationships Between Test Use and Professional Activities and Orientations

ERIC Educational Resources Information Center

Wade, Terry C.; And Others

1978-01-01

The occupational specializations and therapeutic orientations of clinical psychologists were related to their use and opinion of testing. The two tests clinicians considered most important to clinical practice were the Rorschach and the Thematic Apperception Test. Among the 10 most frequently recommended test, projective measures were listed 30…

European Scientific Notes. Volume 38, Number 11.

DTIC Science & Technology

1984-11-01

ENCE 335-346. , "Aziskolai Teljesitmeny Dinamikus Faktoral" (Dynamic Factors Determin- by Richard E. Snow. ing Academic Achievement), Magyar Pedagogia ...par- thing more than, or different from, cog- ticularly social relationships. There nitive abilities such as intelligence or are many other connected...Ability?" Journal of Personal- has been slow getting off the ground in ity and Social Psychology, in press. Europe. At the Sixth International Rorschach

Rorschach Assessment of Two Distinctive Personality States of a Person With Dissociative Identity Disorder.

PubMed

Hartmann, Ellen; Benum, Kirsten

2017-12-13

This case study used test data from a patient with Dissociative Identity Disorder (DID; American Psychiatric Association, 2013 ) to illustrate how two main personality states of the patient ("Ann" and "Ben") seemed to function. The Rorschach Performance Assessment System (R-PAS; Meyer, Viglione, Mihura, Erard, & Erdberg, 2011 ) and the Inventory of Interpersonal Problems-Circumplex (IIP-64; Horowitz, Alden, Wiggins, & Pincus, 2000 ), administered to Ann and Ben in separate settings, exposed two diverse R-PAS and IIP-64 profiles. Ann's R-PAS profile suggested an intellectualized style of information processing with few indications of psychological problems. Ben's profile indicated severe perceptual, cognitive, and interpersonal difficulties combined with suspicion and anxiety. Ann's IIP-64 profile suggested minor interpersonal problems, whereas Ben's indicated serious relational difficulties. The findings were discussed in relation to the theory of trauma-related structural dissociation of the personality (van der Hart, Nijenhuis, & Steele, 2006 ), which implies an enduring split in the organization of the personality with more or less separate entities with their own sense of self, perception of the world, and ways of organizing emotional, cognitive, and social functions. The DID personality structure is seen as a defense strategy and as a pathway in the personality development producing serious psychological pain and symptoms.

Political repression and its psychological effects on Honduran children.

PubMed

Munczek, D S; Tuber, S

1998-12-01

This paper, based on an exploratory study in Honduras, examines the psychological effects of political disappearance and assassination on surviving child family members. There are few, if any, comparative field studies of non-immigrant, non-refugee or non-clinical populations of children with forcibly disappeared and assassinated parents. In Latin America, violent state power has been exercised in a number of ways, including physical intimidation, jailing, murder and "disappearance". This research compares 16 Honduran children who have experienced the loss of a parent through forced disappearance with 11 Honduran children who suffered a similar loss from a political assassination. Surviving parents or caretakers of these children were also interviewed. Differences between children of the disappeared and assassinated were analyzed using a Rorschach object relations scale, post-traumatic stress and symptom and behavior scales and interviews with the children and the surviving parents. Both groups of children have symptoms of traumatic stress, depression, anxiety and aggressive feelings. Children of both groups remain symptomatic for many years after their loss and children with disappeared parents present more unconscious emotional disturbance in the Rorschach object relations scale than children with assassinated parents. The lack of physical, emotional and legal resolution in forced disappearance appears to impede mourning and a return to age-appropriate concerns.

Projective techniques and the detection of child sexual abuse.

PubMed

Garb, H N; Wood, J M; Nezworski, M T

2000-05-01

Projective techniques (e.g., the Rorschach, Human Figure Drawings) are sometimes used to detect child sexual abuse. West recently conducted a meta-analysis on this topic, but she systematically excluded nonsignificant results. In this article, a reanalysis of her data is presented. The authors conclude that projective techniques should not be used to detect child sexual abuse. Many of the studies purportedly demonstrating validity are flawed, and none of the projective test scores have been well replicated.

Personality and long term exposure to organic solvents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindstroem, K.; Martelin, T.

1980-01-01

Personality, especially emotional reactions of two solvent exposed groups and a nonexposed reference group were described by means of 20 formal, content and check-list type of Rorschach variables. Another objective of the study was to explore the suitability and psychological meaning of other types of Rorschach variables than those applied earlier in the field of behavioral toxicology. The factor analyses grouped the applied variables into factors of Productivity, Ego Strength, Control of Emotionality, Defensive Introversion and Aggressiveness. One solvent group, a patient groups (N.53), was characterized by a high number of Organic signs and a low Genetic Level, indicating possiblemore » psychoorganic deterioration. The other solvent group, styrene exposed but subjectively healthy (N.98), was characterized by few emotional reactions, low Anxiety and a low number of Neurotic Signs. the long duration of exposure of the solvent patient group (mean 10.2 +/- 8.7 years) was related to variables of the Productivity factor, a finding that indicates a possible better adjustment of those exposed for a longer time. The duration of exposure of the styrene exposed group (mean 4.9 +/- 3.2 years) revealed a very slight relation to personality variables, but the mean urinary mandelic acid concentration, indicating the level of styrene exposure, correlated with increased emotional reactions. For the most part definite causal conclusions could not be drawn because of the cross-sectional design of the study.« less

Posttraumatic stress disorder in former 'comfort women'.

PubMed

Min, Sung Kil; Lee, Chang Ho; Kim, Joo Young; Sim, Eun Ji

2011-01-01

This study investigated the mental health of former 'comfort women' who serviced the Japanese Imperial Military during the Second World War. We evaluated 26 former comfort women's life histories, cognitive functioning, DSM-IV diagnosis of posttraumatic stress disorder (PTSD), depression, paranoid state, anger, and Rorschach test results, and compared the data with those of 24 healthy women. Cognitive functioning was not significantly different between former comfort women and the comparison group. All 26 former comfort women had undergone traumatic experiences such as sexual slavery and had suffered PTSD symptoms at least once in their lives. Of the 26, 8 (30.8%) were diagnosed as having PTSD, as opposed to none in the comparison group. The women's PTSD symptoms were characterized by avoidance behavior, intrusive and distressing recollections, and anger. There were no significant differences in depression or paranoid state between the two groups, but former comfort women had impairments in anger control. Former comfort women with PTSD were more depressed. On the Rorschach test, former comfort women revealed characteristic responses related not only to sex and morbidity but also to anger and violence. The small number of subjects might not represent all former comfort women. Some data collected by self report might limit the objectivity of the results. The results suggest that former comfort women are still suffering from traumatic memories, symptoms of PTSD, including avoidant behavior, and anger control impairment, even 60 years after the end of the war.

Eye movements during the Rorschach test in schizophrenia.

PubMed

Hori, Yasuko; Fukuzako, Hiroshi; Sugimoto, Yoko; Takigawa, Morikuni

2002-08-01

In order to understand relationships between scanning behaviors, characteristics of visual stimuli and the clinical symptoms in schizophrenia, eye movements of 37 schizophrenic patients and 36 controls were recorded using an eye-mark recorder during a free-response period in a Rorschach test. Four cards (I, II, V and VIII) were used. Data were analyzed during 15 s from the presentation of each card. For all cards, the number of eye fixations and the number of eye fixation areas were fewer, and total scanning length and mean scanning length were shorter for schizophrenic patients than for controls. For card II, in the non-popular response group, eye fixation frequency upon area 5 + 6 (red) was higher for schizophrenic patients. For card VIII, in the popular response group, eye fixation frequency upon area 5 + 6 (pink) was lower for schizophrenic patients. For cards II and VIII, the number of eye fixations was inversely correlated with negative symptoms. For card II, total scanning length tended to be inversely correlated with negative symptoms, and mean eye fixation time was correlated with negative symptoms. The number of eye fixation areas was inversely correlated with positive symptoms. For card VIII, eye fixation frequency in a stimulative area tended to be correlated with positive symptoms. Scanning behaviors in schizophrenic patients are affected by characteristics of visual stimuli, and partially by clinical symptoms.

What psychological testing and neuroimaging tell us about the treatment of Posttraumatic Stress Disorder by Eye Movement Desensitization and Reprocessing.

PubMed

Levin, P; Lazrove, S; van der Kolk, B

1999-01-01

To better understand the pathophysiology and treatment of Posttraumatic Stress Disorder (PTSD), standard psychological testing, Rorschach Ink Blot testing, and neuroimaging using Single Photon Emission Computed Tomography (SPECT) were administered to subjects with PTSD prior to and following three sessions of Eye Movement Desensitization and Reprocessing (EMDR). Using this within-subject design, data from one of six subjects in our series is presented as a case report. Following EMDR, the subject experienced improvement in his level of distress, which correlated with decrements in PTSD and depressive symptomatology on psychological testing. Analysis of the Rorschach data corroborated these changes. Among other findings, the Hypervigilance Index went from positive to negative, indicating that the subject was spending less time scanning the environment for threats, and available ego resources also increased, as measured by the Experience Actual variable. Upon recall of the traumatic memory during SPECT scanning, two areas of the brain were hyperactive post-EMDR treatment relative to pretreatment: the anterior cingulate gyrus and the left frontal lobe. These changes were consistent with summed data from four out of six subjects in the ongoing study. An important implication of these findings is that successful treatment of PTSD does not reduce arousal at the limbic level, but instead, enhances the ability to differentiate real from imagined threat. The psychology and neurophysiology of PTSD are discussed in greater detail.

Rorschach Evaluation of Personality and Emotional Characteristics in Adolescents With Migraine Versus Epilepsy and Controls

PubMed Central

Balottin, Laura; Mannarini, Stefania; Candeloro, Daniela; Mita, Alda; Chiappedi, Matteo; Balottin, Umberto

2018-01-01

The literature examining primary headache, including migraine, in adolescents, has pointed out the key role played by a wide range of psychiatric disorders in reducing the patients’ quality of life. Moreover, pioneering studies showed that preexisting personality characteristics, specific emotion regulation styles and psychological-psychiatric difficulties are likely to increase the risk of the onset, maintenance, and outcome of headache. Still personality issues in migraine have been poorly studied, in particular in children and adolescents. This study aims, therefore, to investigate the specific characteristics of personality, and in particular emotion regulation and coping strategies, in adolescent with migraine, comparing them with age-matched patients with idiopathic epilepsy and healthy adolescents. 52 adolescents (age: 11–17) were assessed using a multi-method test battery, which included a self-report questionnaire (the youth self-report), a proxy-report (child behavior checklist) along with a projective personality test, the Rorschach Test, administered and scored according to the Exner comprehensive system. The results showed specific personality characteristics in adolescents with migraine, revealing a marked difficulty in modulating and regulating affections through thoughts and reflections, resorting instead to impulsive acts and maladaptive coping strategies, thus revealing a vague and immature perception of reality. Differently from adolescents belonging to the general population, but similarly to patients with epilepsy, adolescents with migraine perceive a high situational stress, probably related to the condition of suffering from chronic disease. They have, therefore, a lower self-consideration and self-esteem along with a poorer insight regarding themselves as well as the relations with others. In line with previous findings, these preliminary results suggest the need for further research on ample samples, using also standardized projective test in order to better understand the pathogenesis of psychological difficulties in patients with migraine. As a clinical implication, the results seem to indicate that providing a psychological integrated approach can play a pivotal role in the assessment and treatment of adolescent with migraine, in order to improve the outcome and the quality of life of the young patients. PMID:29615959

Rorschach Evaluation of Personality and Emotional Characteristics in Adolescents With Migraine Versus Epilepsy and Controls.

PubMed

Balottin, Laura; Mannarini, Stefania; Candeloro, Daniela; Mita, Alda; Chiappedi, Matteo; Balottin, Umberto

2018-01-01

The literature examining primary headache, including migraine, in adolescents, has pointed out the key role played by a wide range of psychiatric disorders in reducing the patients' quality of life. Moreover, pioneering studies showed that preexisting personality characteristics, specific emotion regulation styles and psychological-psychiatric difficulties are likely to increase the risk of the onset, maintenance, and outcome of headache. Still personality issues in migraine have been poorly studied, in particular in children and adolescents. This study aims, therefore, to investigate the specific characteristics of personality, and in particular emotion regulation and coping strategies, in adolescent with migraine, comparing them with age-matched patients with idiopathic epilepsy and healthy adolescents. 52 adolescents (age: 11-17) were assessed using a multi-method test battery, which included a self-report questionnaire (the youth self-report), a proxy-report (child behavior checklist) along with a projective personality test, the Rorschach Test, administered and scored according to the Exner comprehensive system. The results showed specific personality characteristics in adolescents with migraine, revealing a marked difficulty in modulating and regulating affections through thoughts and reflections, resorting instead to impulsive acts and maladaptive coping strategies, thus revealing a vague and immature perception of reality. Differently from adolescents belonging to the general population, but similarly to patients with epilepsy, adolescents with migraine perceive a high situational stress, probably related to the condition of suffering from chronic disease. They have, therefore, a lower self-consideration and self-esteem along with a poorer insight regarding themselves as well as the relations with others. In line with previous findings, these preliminary results suggest the need for further research on ample samples, using also standardized projective test in order to better understand the pathogenesis of psychological difficulties in patients with migraine. As a clinical implication, the results seem to indicate that providing a psychological integrated approach can play a pivotal role in the assessment and treatment of adolescent with migraine, in order to improve the outcome and the quality of life of the young patients.

[Knowledge about the relationship through protagonist-director interactions in psychodrama groups].

PubMed

Erdélyi, Ildikó

2005-01-01

This report follows emotional behavior in two psychodrama groups from the "present moment" until "moment of contact" using the Consensus Rorschach method. In the analysis of verbal and nonverbal material of protagonist-director dyads the following patterns were distinguished: a) early relationship patterns; b) affective attunement; c) fit of knowledge about the relationship. The author describes the relationship between the concept of "present moment" in therapy and the role of eye contact. Eye contact produces emotional tension in the context of the "present moment". Moments of contact, however, require implicit and explicit knowledge about the relationship to be constructed simultaneously as well as development of affective interactions. Emotional impulses are stored in implicit memory, which has no immediate availability. However, therapy--including psychodrama--attaches words to behaviors that are beyond the verbal levels as well, and therefore it extends the domain of memory. This is the way in which non-symbolized emotional behavior (including eye contact) and the play's verbal level with symbolic representations of memories are interconnected.

A meta-analysis of an implicit measure of personality functioning: the Mutuality of Autonomy Scale.

PubMed

Graceffo, Robert A; Mihura, Joni L; Meyer, Gregory J

2014-01-01

The Mutuality of Autonomy scale (MA) is a Rorschach variable designed to capture the degree to which individuals mentally represent self and other as mutually autonomous versus pathologically destructive (Urist, 1977). Discussions of the MA's validity found in articles and chapters usually claim good support, which we evaluated by a systematic review and meta-analysis of its construct validity. Overall, in a random effects analysis across 24 samples (N = 1,801) and 91 effect sizes, the MA scale was found to maintain a relationship of r =.20, 95% CI [.16,.25], with relevant validity criteria. We hypothesized that MA summary scores that aggregate more MA response-level data would maintain the strongest relationship with relevant validity criteria. Results supported this hypothesis (aggregated scoring method: r =.24, k = 57, S = 24; nonaggregated scoring methods: r =.15, k = 34, S = 10; p =.039, 2-tailed). Across 7 exploratory moderator analyses, only 1 (criterion method) produced significant results. Criteria derived from the Thematic Apperception Test produced smaller effects than clinician ratings, diagnostic differentiation, and self-attributed characteristics; criteria derived from observer reports produced smaller effects than clinician ratings and self-attributed characteristics. Implications of the study's findings are discussed in terms of both research and clinical work.

Impact on children of a parent with ALS: a case-control study.

PubMed

Calvo, Vincenzo; Bianco, Francesca; Benelli, Enrico; Sambin, Marco; Monsurrò, Maria R; Femiano, Cinzia; Querin, Giorgia; Sorarù, Gianni; Palmieri, Arianna

2015-01-01

Numerous studies have explored how patients and their caregivers cope with amyotrophic lateral sclerosis (ALS), but the literature completely lacks research on the psychological impact of the disease on patients' children. The aim of our study was to investigate the emotional and psychological impact of a parent with ALS on school-age children and adolescents in terms of problem behavior, adjustment, and personality characteristics. The study involved 23 children (mean age = 10.62 years, six females) with a parent suffering from ALS, and both their parents. Children were matched for age, gender, and birth-order with a control group of children with healthy parents. They were administered the Youth Self Report (YSR) questionnaire and the Rorschach Comprehensive System, and their healthy parent completed the Child Behavior Checklist (CBCL). Findings clearly showed that, compared with controls, children with a parent who had ALS had several clinically significant adverse emotional and behavioral consequences, with emotional and behavioral problems, internalizing problems, anxiety and depressive symptoms. Children of a parent with ALS scored higher than controls for the Total Problems, Internalizing Problems, Anxious/Depressed and Withdrawn/Depressed scales in the YSR. A relevant percentage of children fell within the clinical range (42.9%) and borderline range (28.6%) for Internalizing Problems. The Rorschach CS confirmed the substantial impact of ALS in a parent on their offspring in terms of internalizing behavior and depression, with adjustment difficulties, psychological pain, and thought problems. Our findings indicate that school-aged children and adolescents with a parent who has ALS are vulnerable and carry a substantially higher risk of internalizing behavior, depressive symptoms, and reactive problems than children with healthy parents. Families affected may need support to cope with such an overwhelming disease.

The cognitive, behavioral, and personality profiles of a male monozygotic triplet set discordant for sexual orientation.

PubMed

Hershberger, Scott L; Segal, Nancy L

2004-10-01

The neurohormonal theory of sexual orientation proposes that homosexual men and homosexual women are exposed prenatally to a hormonal environment that is similar to that of the other sex. Prenatal exposure to an opposite-sex hormonal environment may lead the nervous system to develop in a manner consistent with the opposite sex. If this cross-sex exposure occurs, one prediction would be that the cognitive ability profile of homosexual men would be similar to that of heterosexual women. This study examined a set of male monozygotic triplets, aged 21 years, discordant for sexual orientation: 2 of the triplets were heterosexual, 1 was homosexual. The triplets were administered measures of 23 domains of cognitive ability, as well as measures of sexual orientation and masculinity/femininity. On the measures of cognitive ability, the triplets performed similarly, yet consistent differences were found between the 2 heterosexual triplets and the 1 homosexual cotriplet. Differences having the same pattern were found for the number of Schafer homosexuality signs on the Rorschach, and on a homosexuality scale derived from items on the Minnesota Multiphasic Personality Inventory--2 (MMPI-2). Responses from the homosexual triplet were in a more feminine direction than responses from his 2 heterosexual cotriplets on measures of masculinity-femininity, which included measures derived from Rorschach responses, the MMPI-2 Masculinity-Femininity scale, the Bem Sex Role Inventory, and the Boyhood Gender Conformity Scale. Responses to the 16 Personality Factor Questionnaire also distinguished the 1 homosexual triplet from the 2 heterosexual cotriplets. These findings support the view that the prenatal hormonal environment may have enduring effects on selected behavioral traits. Copyright 2004 Springer Science + Business Media, Inc.

Attachment Style and Internet Addiction: An Online Survey.

PubMed

Eichenberg, Christiane; Schott, Markus; Decker, Oliver; Sindelar, Brigitte

2017-05-17

One of the clinically relevant problems of Internet use is the phenomenon of Internet addiction. Considering the fact that there is ample evidence for the relationship between attachment style and substance abuse, it stands to reason that attachment theory can also make an important contribution to the understanding of the pathogenesis of Internet addiction. The aim of this study was to examine people's tendency toward pathological Internet usage in relation to their attachment style. An online survey was conducted. Sociodemographic data, attachment style (Bielefeld questionnaire partnership expectations), symptoms of Internet addiction (scale for online addiction for adults), used Web-based services, and online relationship motives (Cyber Relationship Motive Scale, CRMS-D) were assessed. In order to confirm the findings, a study using the Rorschach test was also conducted. In total, 245 subjects were recruited. Participants with insecure attachment style showed a higher tendency to pathological Internet usage compared with securely attached participants. An ambivalent attachment style was particularly associated with pathological Internet usage. Escapist and social-compensatory motives played an important role for insecurely attached subjects. However, there were no significant effects with respect to Web-based services and apps used. Results of the analysis of the Rorschach protocol with 16 subjects corroborated these results. Users with pathological Internet use frequently showed signs of infantile relationship structures in the context of social groups. This refers to the results of the Web-based survey, in which interpersonal relationships were the result of an insecure attachment style. Pathological Internet use was a function of insecure attachment and limited interpersonal relationships. ©Christiane Eichenberg, Markus Schott, Oliver Decker, Brigitte Sindelar. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 17.05.2017.

Blunted vocal affect and expression is not associated with schizophrenia: A computerized acoustic analysis of speech under ambiguous conditions.

PubMed

Meaux, Lauren T; Mitchell, Kyle R; Cohen, Alex S

2018-05-01

Patients with schizophrenia are consistently rated by clinicians as having high levels of blunted vocal affect and alogia. However, objective technologies have often failed to substantiate these abnormalities. It could be the case that negative symptoms are context-dependent. The present study examined speech elicited under conditions demonstrated to exacerbate thought disorder. The Rorschach Test was administered to 36 outpatients with schizophrenia and 25 nonpatient controls. Replies to separate "perceptual" and "memory" phases were analyzed using validated acoustic analytic methods. Compared to nonpatient controls, schizophrenia patients did not display abnormal speech expression on objective measure of blunted vocal affect or alogia. Moreover, clinical ratings of negative symptoms were not significantly correlated with objective measures. These findings suggest that in patients with schizophrenia, vocal affect/alogia is generally unremarkable under ambiguous conditions. Clarifying the nature of blunted vocal affect and alogia, and how objective measures correspond to what clinicians attend to when making clinical ratings are important directions for future research. Copyright © 2018 Elsevier Inc. All rights reserved.

Attachment, assessment, and psychological intervention: a case study of anorexia.

PubMed

Lis, Adriana; Mazzeschi, Claudia; Di Riso, Daniela; Salcuni, Silvia

2011-01-01

Attachment patterns and personality dimensions have always been considered important to the development and adaptation of the individual. The first aim of this article was to address some basic questions about the place of attachment in a multimethod assessment when compiling a complete picture of the patient's personality functioning. The second aim was to present the Adult Attachment Projective Picture System (AAP; George & West, 2001) as a valid and productive assessment measure. Based on a single case study of an anorexic young woman, the article demonstrates how the AAP is integrated with the Rorschach Comprehensive System (Exner, 1991, 1993) and other assessment tools in both the assessment and in developing a treatment plan.

Painless Parker's legacy: ethics, commerce, and advertising in the professions.

PubMed

Peltier, Bruce

2007-01-01

This presentation will review the life and contributions of Dr. Edgar Parker, the infamous and controversial pioneer who specialized in a precarious straddling of the ethics of the commercial marketplace and the ethics of care. Something of a Rorschach test, he was alternatively referred to as a charlatan, the first people's dentist, a renegade, a crusader, a quack, the Henry Ford of dentistry, and "a menace to the dignity of the profession". He eventually owned and managed thirty dental offices, several in San Francisco, as well as the Parker Dental Circus. Because many young, twenty-first century practitioners have little problem with slick advertising, it seems appropriate to revisit Painless Parker's career and contribution to the current state of affairs.

The role of the right hemisphere in form perception and visual gnosis organization.

PubMed

Belyi, B I

1988-06-01

Peculiarities of series of picture interpretations and Rorschach test results in patients with unilateral benign hemispheric tumours are discussed. It is concluded that visual perception in the right hemisphere has hierarchic structure, i.e., each successive area from the occipital lobe towards the frontal having a more complicated function. Visual engrams are distributed over the right hemisphere in a manner similar to the way the visual information is recorded in holographic systems. In any impairment of the right hemisphere a tendency towards whole but unclear vision arises. The preservation of lower levels of visual perception provides for clear vision only of small parts of the image. Thus, confabulatory phenomena arises, which are specific for right hemispheric lesions.

Changes in implicit and explicit measures of ego functions and distress among two eating disorder subgroups: outcomes of integrative treatment.

PubMed

Rothschild, Lily; Lacoua, Liza; Stein, Daniel

2009-01-01

The study examined changes in ego functions and mental distress among eating disorder (ED) adolescent inpatients following integrative treatment. Participants included 31 restricting anorexia nervosa and 25 bingeing/purging spectrum ED inpatients. Rorschach Comprehensive System (CS; Exner, 2003) and self-report measures were administered on admission and discharge. We found that improvement in ego functions, mental distress and ED symptomatology occurred in both ED groups at discharge. Nevertheless, the two ED subgroups exhibited different configurations of change as well as varying patterns of relations between changes in mental distress and ego functions and improvement in ED symptoms. These data further indicate that the restricting and bingeing/purging patients may require different treatment approaches.

Identifying dissociative identity disorder: a self-report and projective study.

PubMed

Scroppo, J C; Drob, S L; Weinberger, J L; Eagle, P

1998-05-01

This study compared 21 female adult psychiatric patients diagnosed with dissociative identity disorder (DID) with 21 female adult nondissociative psychiatric patients to determine whether DID patients exhibit a distinguishing set of clinical features, and perceptual, attentional, and cognitive processes. Participants were assessed with the Dissociative Disorders Interview Schedule to assess diagnostic status. Group scores on the Dissociative Experiences Scale, Tellegen Absorption Scale, Childhood Trauma Questionnaire, Brief Symptom Inventory, and the Rorschach test were compared. DID participants reported earlier and more severe childhood trauma, more dissociative symptoms, and a greater propensity for altered states of consciousness. The DID participants also exhibited increased projective and imaginative activity, a diminished ability to integrate mental contents, a complex and driven cognitive style, and a highly unconventional view of reality.

Psychological Assessment Training in Clinical Psychology Doctoral Programs.

PubMed

Mihura, Joni L; Roy, Manali; Graceffo, Robert A

2017-01-01

We surveyed American Psychological Association-accredited clinical psychology doctoral programs' (n = 83) training in psychological assessment-specifically, their coverage of various assessment topics and tests in courses and practica, and whether the training was optional or required. We report results overall and separately per training model (clinical science, scientist-practitioner, and practitioner-focused). Overall, our results suggest that psychological assessment training is as active, or even more active, than in previous years. Areas of increased emphasis include clinical interviewing and psychometrics; multimethod, outcomes, health, and collaborative or therapeutic assessment; and different types of cognitive and self-report personality tests. All or almost all practice-focused programs offered training with the Thematic Apperception Test and Rorschach compared to about half of the scientist-practitioner programs and a third of the clinical science programs. Although almost all programs reported teaching multimethod assessment, what constitutes different methods of assessing psychopathology should be clarified in future studies because many programs appear to rely on one method-self-report (especially clinical science programs). Although doctoral programs covered many assessment topics and tests in didactic courses, there appears to be a shortage of program-run opportunities for students to obtain applied assessment training. Finally, we encourage doctoral programs to be familiar with (a) internships' assessment expectations and opportunities, (b) the professional guidelines for assessment training, and (c) the American Psychological Association's requirements for preinternship assessment competencies.

A psychometric evaluation of the Rorschach comprehensive system's perceptual thinking index.

PubMed

Dao, Tam K; Prevatt, Frances

2006-04-01

In this study, we investigated evidence for reliability and validity of the Perceptual Thinking Index (PTI; Exner, 2000a, 2000b) among an adult inpatient population. We conducted reliability and validity analyses on 107 patients who met the Diagnostic and Statistical Manual of Mental Disorders (4th ed., text revision; American Psychiatric Association, 2000) criteria for a schizophrenia-spectrum disorder (SSD) or mood disorder with no psychotic features (MD). Results provided support for interrater reliability as well as internal consistency of the PTI. Furthermore, the PTI was an effective index in differentiating SSD patients from patients diagnosed with an MD. Finally, the PTI demonstrated adequate diagnostic statistics that can be useful in the classification of patients diagnosed with SSD and MD. We discuss methodological issues, implications for assessment practice, and directions for future research.

Clinical identification of compensatory structures on projective tests: a self psychological approach.

PubMed

Silverstein, M L

2001-06-01

In this article I discuss compensatory structure, a concept from Kohut's (1971, 1977) psychology of the self that is not as familiar as Kohut's other views about the self. Compensatory structures are attempts to repair selfobject failure, usually by strengthening idealization or twinship in the face of mirroring deficits. Compensatory structures, particularly their early indications, can be detected on projective tests for identifying adaptive resources and treatment potential. The clinical identification of compensatory structures on test findings is described using Rorschach and Thematic Apperception Test (Murray, 1943) content. Particular attention is devoted to the 2-part process of demonstrating first, an injury to the self, and second, how attempts to recover from such injuries can be detected on projective tests. Clinical examples are provided, and the differentiation between compensatory structures and defenses and sublimation is discussed.

The Potato Chip Really Does Look Like Elvis! Neural Hallmarks of Conceptual Processing Associated with Finding Novel Shapes Subjectively Meaningful

PubMed Central

Federmeier, Kara D.; Paller, Ken A.

2012-01-01

Clouds and inkblots often compellingly resemble something else—faces, animals, or other identifiable objects. Here, we investigated illusions of meaning produced by novel visual shapes. Individuals found some shapes meaningful and others meaningless, with considerable variability among individuals in these subjective categorizations. Repetition for shapes endorsed as meaningful produced conceptual priming in a priming test along with concurrent activity reductions in cortical regions associated with conceptual processing of real objects. Subjectively meaningless shapes elicited robust activity in the same brain areas, but activity was not influenced by repetition. Thus, all shapes were conceptually evaluated, but stable conceptual representations supported neural priming for meaningful shapes only. During a recognition memory test, performance was associated with increased frontoparietal activity, regardless of meaningfulness. In contrast, neural conceptual priming effects for meaningful shapes occurred during both priming and recognition testing. These different patterns of brain activation as a function of stimulus repetition, type of memory test, and subjective meaningfulness underscore the distinctive neural bases of conceptual fluency versus episodic memory retrieval. Finding meaning in ambiguous stimuli appears to depend on conceptual evaluation and cortical processing events similar to those typically observed for known objects. To the brain, the vaguely Elvis-like potato chip truly can provide a substitute for the King himself. PMID:22079921

[Importance and extension of the qualitative approach in phenomeno-structural method in psychopathology].

PubMed

Barthélémy, J M

2006-01-01

Fundamental principles of phenomeno-structural method partly originate from a phenomenological approach in psychiatry for which, as Jaspers says, "the important thing is less the study of innumerable cases than the intuitive and major comprehension of some particular ones". It means that, far from traditional statistical proceedings, it does not give any priority to the temptation of a cumulative and accumulative collection of data, for which it even receives their greatest misgivings, leaving it out of its procedures. This method also owes a lot to Bergson's insistence on the qualitative characteristics of the "immediate data of consciousness" and of experienced temporality, for which analytical and chronological fragmentations can do nothing but distort the authentically comprehensive grasping, and make them loose their specificity, unity and thus the indecomposability that, by nature, they precisely contain. According to Eugene Minkowski, the psychopathical break-up, proceeding from the deep heart of life, is essentially going to express itself, with its own properties, as a qualitative modification. In this way, the study of some cases carefully chosen, in accordance with their "typical" value, is more important than a blind acquisition of data, i.e. without previous option, orientation or perspective. Starting from their spontaneous words collected during a conversation, the meticulous analysis of the language of the patients, put in resonance with the vivid metaphors of the language in which they are expressed, as Minkowski will so brilliantly show, or via mediations connecting image and language, as in the experiment of the Rorschach--particularly approached in its essential mechanisms by his wife Francoise Minkowska--represents, from this point of view, a mediator and an irreplaceable instrument of a qualitative approach of a normal as well as a pathological personality and, more widely, of the person itself.

Personality: individual differences and clinical assessment.

PubMed

Butcher, J N; Rouse, S V

1996-01-01

Research in clinical personality assessment continues to be produced at a high rate. The MMPI/MMPI-2 remains the most popular instrument for both clinical application and psychopathology research. Two other clinical personality instruments, the Rorschach and TAT, continue to find a place in research and clinical assessment. Some new instruments have surfaced recently to deal with areas, such as personality disorders, that have been considered inadequately addressed. There is a growing recognition that the Five-Factor Model is too superficial for clinical assessment that requires more refined and broadened patient information. Clinical personality assessment has successfully survived a number of past challenges. The newest challenge stems from the health-care revolution, in which managed-care providers are reluctant to pay for assessment because of shrinking funds. Psychologists need to develop models for incorporating assessment information into the treatment process. The future is likely to see more extensive research and theoretical development in this endeavor.

Nocturnal enuresis in a longitudinal perspective. A primary problem of maturity and/or a secondary environmental reaction?

PubMed

Klackenberg, G

1981-07-01

The study is part of a prospective longitudinal investigation, involving annual somatic, psychological and social check-ups in a random sample of 212 children. Data are presented on the gradual achievement of bladder control, with relapses into wetting. Information is provided on relationships with training, with behavioural variables, with emotional maturity (Rorschach) and with sleep. It seems probable that primary enuresis usually ceases by the age of 8 at the latest and that enuresis in older children is a secondary emotional disorder which may, however, have started at an earlier age. The 6-year-old enuretic shows signs of delayed emotional maturity. The relation with somnambulism is ambiguous. Enuresis is not significantly related to training. None of the data obtained in this study conflict with the theory that primary enuresis is chiefly a maturity problem, the nature of which can be emotional. The neurophysiological aspect has not been investigated.

Sexual abuse, family environment, and psychological symptoms: on the validity of statistical control.

PubMed

Briere, J; Elliott, D M

1993-04-01

M. R. Nash, T. L. Hulsey, M. C. Sexton, T. L. Harralson, and W. Lambert (1993) reported on the effects of controlling for family environment when studying sexual abuse sequelae. Sexual abuse history was associated with elevated Minnesota Multiphasic Personality Inventory and Rorschach scores in a sample of 105 women, but many of the reported differences disappeared when a Family Functioning Scale score was used as a covariate. The present article considers the findings of Nash et al. in terms of the theoretical and statistical constraints placed on analysis of covariance and other partializing procedures. Because family dysfunction is not always causally antecedent to sexual abuse, and given the quasi-experimental quality of most abuse research, the use of covariate techniques to test hypotheses about the causal role of family environment in the impacts of sexual abuse may be ill advised. Analyses of a 2,964-subject data set illustrate these concerns.

Who has nightmares? The personality of the lifelong nightmare sufferer.

PubMed

Hartmann, E; Russ, D; Oldfield, M; Sivan, I; Cooper, S

1987-01-01

Twelve lifelong nightmare sufferers, 12 vivid dreamers who had no nightmares, and 12 persons who had neither nightmares nor vivid dreams were studied in a series of structured interviews, psychological tests, and other tests. The group with nightmares had significantly higher scores on the "psychotic" side of the Minnesota Multiphasic Personality Inventory profile than the other two groups, scored higher on a "boundary deficit" score of the Rorschach test, and had more first- and second-degree relatives with nightmares, psychological problems, and psychiatric hospitalization. There were no significant differences between the groups with vivid and nonvivid dreams. On interview, the frequent nightmare sufferers were a group of sensitive, open persons who had features of the "schizophrenic spectrum disorders," but who also had artistic and creative tendencies and interests, in contrast to the other groups. These results confirm and extend our previous findings in a group of 38 frequent nightmare sufferers.

[Self-esteem, self-centeredness and social-emotional adjustment of gifted children and adolescents].

PubMed

Kostogianni, N; Andronikof, A

2009-10-01

There is an ongoing debate of how giftedness affects social-emotional adjustment. Self-esteem may be an indicator of social-emotional adjustment but insufficient in its explanatory capacity, especially high self-esteem which tends to produce opposite responses in regards to adjustment. A distinction between defensive and genuine high self-esteem could account for these results. In order to understand how self-esteem operates on social-emotional adjustment, it should be associated with other measurements relating to self-concern. In the Rorschach comprehensive system (CS), egocentricity index measures self-centeredness, which can be defined as the balance between self-concern and concern for others. High self-concern is associated with a neglect of the others. Operationalized here, as the interaction of high self-esteem and excessive self-concern, defensive high self-esteem should predict maladaptive outcomes. Participants were aged from 9 to 15 years old, with an IQ greater or equal to 130 on the WISC-III. They were attending regular classes and were not in counseling or psychotherapy. Children and adolescents were administrated the Rorschach CS and the Coopersmith self-esteem inventory. Parents completed the child behaviour checklist (CBCL) which assesses general psychopathology. Seventy-eight subjects' data satisfy the conditions of validity of the instruments used. Gifted boys present more behavior and emotional problems than gifted girls in this study. Self-esteem predicts social-emotional adjustment. There is an interaction between self-esteem and self-concern on psychopathology only for high values of self-esteem. Gifted with high self-esteem associated with high self-concern are more vulnerable to maladjustment than high self-esteem associated with low self-concern. Gifted children and adolescents with low self-esteem experience more problems anyhow. These findings reinforce the view that the gifted are a diverse group in terms of social-emotional adjustment and self-esteem. Self-esteem operates as a valuable resource for the social-emotional adjustment of gifted children and adolescents but only under some conditions. Low self-esteem gifted seem to be at more risk of maladjustment, but that does not mean any causal relationship. Gifted children and adolescents with high self-esteem can be considered as a heterogeneous category. High self-esteem associated to excessive self-concern has less beneficial effects on adjustment than high self-esteem associated to low self-concern.

The nonlinear, complex sequential organization of behavior in schizophrenic patients: neurocognitive strategies and clinical correlations.

PubMed

Paulus, M P; Perry, W; Braff, D L

1999-09-01

Thought disorder is a hallmark of schizophrenia and can be inferred from disorganized behavior. Measures of the sequential organization of behavior are important because they reflect the cognitive processes of the selection and sequencing of behavioral elements, which generate observable and analyzable behavioral patterns. In this context, sequences of choices generated by schizophrenic patients in a two-choice guessing task fluctuate significantly, which reflects an "oscillating dysregulation" between highly predictable and highly unpredictable subsequences within a single test session. In this study, we aimed to clarify the significance of dysregulation by seeing whether demographic, clinical, neuropsychological, and psychological measures predict the degree of dysregulation observed on this two-choice task. Thirty schizophrenic patients repeatedly performed a LEFT or RIGHT key press that was followed by a stimulus, which occurred randomly on the left or right side of the computer screen. Thus, the stimulus location had nothing to do with the key press behavior. The range of key press sequence predictabilities as measured by the dynamical entropy was used to quantify the dysregulation of response sequences and reflects the range of fixity and randomness of the responses. A factor analysis was performed and step-wise multiple regression analyses were used to relate the factor scores to demographic, clinical, symptomatic, Wisconsin Card Sorting Test (WCST), and Rorschach variables. The LEFT/RIGHT key press sequences were determined by three factors: 1) the degree of win-stay/lose-shift strategy; 2) the degree of contextual influence on the current choice; and 3) the degree of dysregulation on the choice task. Demographic and clinical variables did not predict any of the three response patterns on the choice task. In contrast, the WCST and Rorschach test predicted performance on various factors of choice task response patterns. Schizophrenic patients employ several rules, i.e., "win-stay/lose-shift" and "decide according to the previous choice," that fluctuate significantly when generating sequences on this task, confirming that a basic behavioral dysregulation occurs in a single schizophrenic subject across a single test session. The organization or the "temporal architecture" of the behavioral sequences is not related to symptoms per se, but is related to deficits in executive functioning, problem solving, and perceptual organizational abilities.

CONCOMITANT MACULAR HOLE AND CENTRAL SEROUS CHORIORETINOPATHY AFTER BLUNT EYE TRAUMA.

PubMed

Tekin, Kemal; Citirik, Mehmet; Atalay, Muhammed; Teke, Mehmet Yasin

2018-01-01

To report concomitant macular hole and central serous chorioretinopathy after blunt trauma. Case presentation. A 31-year-old man presented with a complaint of a reduction in visual acuity and blurred vision in the right eye after blunt eye trauma. The patient did not have a history of any systemic disorders and drug administration. On ocular examination, best corrected visual acuity was 2/20 in the right eye and 20/20 in the left eye. His intraocular pressures were 14 mmHg right eye and 13 mmHg left eye by applanation tonometry. Dilated fundus examination of the right eye showed macular hole and serous macular detachment, whereas the left eye was completely normal. Optical coherence tomography confirmed the full-thickness macular hole and subretinal fluid in the right eye, and ink-blot leakage pattern was determined in fundus fluorescein angiography. The patient was followed up without systemic therapy. Three months later, the vision was 10/20 in the right eye with completely closed macular hole and complete resolution of subretinal fluid. This is the first case which describes concomitant macular hole and central serous chorioretinopathy after blunt eye trauma. This presentation demonstrates that macular hole and central serous chorioretinopathy can be developed after blunt trauma. Both pathology may result with spontaneous closure of macular hole and spontaneous resolution of subretinal fluid within 3 months.

A Study of Risk Factors in Recidivistic Criminals

PubMed Central

Tiwari, S.C.; Gupta, S. C.; Shukla, Seema; Srivastava, Shipra; Pandey, Mamta; Maurya, Amit; Kumar, Aditya

2004-01-01

A study was carried out under the aegis of Indian Council of Medical Research, New Delhi with objectives to identify psychosocial, physical, psychiatric, anthropometric and psychometric risk factors in recidivistic criminals, which could predict a future recidivistic criminal. The paper presents study observations on 250 experimental, 250 control-1 and 250 control-2 subjects. Experimental and control-1 subjects were recruited from district jails of Uttar Pradesh and control-2 from the community. Pretested Semi-structured proformae, Verghese and Beig Symptoms Checklist, International Personality Disorder Examination module, Hostility and Direction of Hostility Questionnaire, Rorschach Ink Blot Test and Standard Anthropometric instruments were used to collect data on study probands. All the three groups were compared using Analysis of Variance and Chi-Square Test. The results highlight a number of psycho-social, psychiatric, psychometric and anthropometric factors which were found to have significant association with recidivistic criminal behaviour. The findings would not only help in identifying future recidivistic criminals but can also be used for legal, judicial, interventional and corrective purposes. PMID:21408043

[Using projective tests in forensic psychiatry may lead to wrong conclusions. Only empirically tested tests should be used].

PubMed

Trygg, L; Dåderman, A M; Wiklund, N; Meurling, A W; Lindgren, M; Lidberg, L; Levander, S

2001-06-27

The use of projective and psychometric psychological tests at the Department of Forensic Psychiatry in Stockholm (Huddinge), Sweden, was studied for a population of 60 men, including many patients with neuropsychological disabilities and multiple psychiatric disorders. The results showed that the use of projective tests like Rorschach, Object Relations Test, and House-Tree-Person was more frequent than the use of objective psychometric tests. Neuropsychological test batteries like the Halstead-Reitan Neuropsychological Test Battery or Luria-Nebraska Neuropsychological Battery were not used. The majority of patients were, however, assessed by intelligence scales like the WAIS-R. The questionable reliability and validity of the projective tests, and the risk of subjective interpretations, raise a problem when used in a forensic setting, since the courts' decisions about a sentence to prison or psychiatric care is based on the forensic psychiatric assessment. The use of objective psychometric neuropsychological tests and personality tests is recommended.

Journeys through the valley of death: multimethod psychological assessment and personality transformation in long-term psychotherapy.

PubMed

Finn, Stephen E

2011-03-01

The Psychodynamic Diagnostic Manual (PDM Task Force, 2006) is based on the assumption that an in-depth understanding of clients' underlying emotional, personality, and interpersonal patterns will facilitate their treatment. In this article I show how such an understanding can be achieved through multimethod psychological assessment, and how useful such information can be in long-term psychotherapy with high-achieving, successful clients who struggle with forming and maintaining intimate relationships. Such treatments are extremely difficult, because when these clients attach to their psychotherapists, many of them temporarily become more symptomatic. I illustrate these points with a detailed account of my long-term therapy with a resilient but highly traumatized young man. Repeated use of the Minnesota Multiphasic Personality Disorder-2 (MMPI-2; Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989) and Rorschach with my client helped guide us in our work, and also helped create an important therapeutic "opening" into the underlying traumatic material. This and other experiences have convinced me that it is extremely useful for psychologists to have training in both assessment and psychotherapy.

Mastery of the mind East and West: excellence in being and doing and everyday happiness.

PubMed

Brown, Daniel

2009-08-01

Western psychological research on positive psychology and Buddhism have recently converged in their emphasis on the development of positive states, like states of excellence and everyday happiness. Yet, these traditions differ in their approaches to positive states, with respect to a state-trait and doing-being distinction. Western scientific research on peak performance emphasizes discontinuous, time-limited peak performance states wherein individuals do things extraordinarily well in sports and in the arts. The Eastern spiritual traditions emphasize continuous excellence of being, in the form of traits or character strengths. In both traditions mental imagery is a key ingredient to excellence training. With respect to everyday happiness, Western psychological research has focused on the role of meaning systems in the transformation of flow states into vital engagement in everyday life, while Buddhism stresses the role of meditation training to gain mastery over all levels of mind that leads to everyday happiness. Rorschach and tachistoscopic research on advanced meditators suggests that advance meditators have gained unusual mastery over states of mind not yet documented in the Western psychological research on positive psychology.

Do pedophiles have a weaker identity structure compared with nonsexual offenders?

PubMed

Tardi, M; Van Gijseghem, H

2001-10-01

The aim of this study was to determine whether pedophiles have a weaker identity structure compared with nonsexual offenders. The recruitment process secured the participation of 87 male adult subjects, divided into three groups: 27 pedophiles who abused male victims (X = 38.6 years), 30 pedophiles who abused female victims (X = 35.5 years), 30 nonsexual offenders (X = 29.8 years). The concept of identity was examined on the basis of two factors: body image limits and ego identity. Two objective tests, the Minnesota Multiphasic Personality Inventory (MMPI) and the Ego Identity Scale, and one projective test, the Rorschach scored according to the Fisher and Cleveland method, were used. A multivariate analysis of covariance, at a significance threshold of p < .05, indicated that pedophiles who abused female victims and pedophiles who abused male victims have more fragile body image limits, as measured by the penetration score, and present a higher level of social introversion (Si scale) than do nonsexual offenders. Moreover, pedophiles who abused male victims have a weaker ego (Es scale) than do pedophiles who abused female victims and nonsexual offenders. In other respects, no significant intergroup difference emerged in terms of body image limits as measured by the barrier score and of strength of ego identity (Ego Identity Scale). Conceptual and empirical elements related to body image and ego identity are addressed to shed light on the potential disturbances in the identity of pedophile subjects. These results imply not only that certain impairments exist at the level of the basis structures of the personality, but also that these impairments should be taken into account in formulating a program and devising a therapeutic process for pedophiles.

Assessment of self-perception of transsexual persons: pilot study of 15 patients.

PubMed

Barišić, Jasmina; Milosavljević, Marija; Duišin, Dragana; Batinić, Borjanka; Vujović, Svetlana; Milovanović, Srdjan

2014-01-01

There have been few studies in the area of Self-Perception in transsexual persons, except for the population of transsexual adolescents. Bearing in mind its importance not only in the assessment of personality but also in predicting adaptive capacity, the goal of our research is based on the examination of Self-Perception of adult transsexual persons. The study was conducted using a Rorschach test, which provides an insight into various aspects of Self-Perception. The sample consisted of 15 transsexual persons, who passed the standard diagnostic procedure. The results suggest that transsexual persons manage to maintain Adequate Self-Esteem. Hypervigilance Index and Obsessive Style Index are negative, while the values showing a negative quality of Self-Regard and the capacity for introspection tend to increase. In the process of Self-Introspection, negative and painful emotional states are often perceived. The estimation of Self-Perception in adult transsexual persons indicates a trend of subjective perception of a personal imperfection or inadequacy. This is probably the result of experiencing discomfort for a number of years due to gender incongruence and dysphoria, in particular in persons who enter the sex reassignment procedure later in their adulthood.

Projective risk variables in early adolescence and subsequent disinhibitory psychopathology.

PubMed

af Klinteberg, Britt; Johansson, Sven-Erik; Gacono, Carl; Alm, Per Olof

2008-01-01

The objective was to examine early adolescent projective risk indicators for the development of antisocial behaviour as related to adult personality traits, psychopathy, and violent behaviour over the life span. Assessment data included Rorschach (Rr) ratings (at age 11-14 years), personality inventories (EPQ-I and KSP scales), and a shortened Psychopathy Check List (PCL) (administered at age 32-40 years), obtained from a group of 199 male subjects; and smoking habits (at age 36-44 years) obtained from 125 of those subjects. Results, controlled for intelligence, indicated that the high and very high risk groups, as determined by level of total Rr risk scores, were (1) significantly higher on self-rated IVE Impulsiveness, the anxiety-related KSP Muscular Tension, and nonconformity traits, as compared to the low Rr risk group--the very high risk group also scoring significantly higher on the EPQ Psychoticism scale, related to aggressiveness and cruelty; (2) higher on clinically rated PCL total sum and factor scores; and (3) they were overrepresented among Ss with subsequent violent offence, and Ss with heavy smoking habits. The results are discussed in terms of the possible usefulness of psychodynamic oriented cognitive-emotional indicators in the search for underlying mechanisms in the development of disinhibitory psychopathology.

Queer signs: The women of the British projective test movement.

PubMed

Hubbard, Katherine

2017-07-01

As queer history is often hidden, historians must look for "signs" that hint at queer lives and experiences. When psychologists use projective tests, the search for queer signs has historically been more literal, and this was especially true in the homophobic practices of Psychology in the mid-twentieth century. In this paper, I respond to Elizabeth Scarborough's call for more analytic history about the lesser known women in Psychology's history. By focusing on British projective research conducted by lesbian psychologist June Hopkins, I shift perspective and consider, not those who were tested (which has been historically more common), but those who did the testing, and position them as potential queer subjects. After briefly outlining why the projective test movement is ripe for such analysis and the kinds of queer signs that were identified using the Rorschach ink blot test in the mid-twentieth century, I then present June Hopkins' (1969, 1970) research on the "lesbian personality." This work forms a framework upon which I then consider the lives of Margaret Lowenfeld, Ann Kaldegg, and Effie Lillian Hutton, all of whom were involved in the British projective test movement a generation prior to Hopkins. By adopting Hopkins' research to frame their lives, I present the possibility of this ambiguous history being distinctly queer. © 2017 Wiley Periodicals, Inc.

[Program of studies on psychiatric epidemiology in Argentina. General report].

PubMed

Casullo, M M

1980-12-01

This paper is an outline of a wide program that is currently under development in the large territory of Argentina. The Director of the Program is Dr. Fernando Pagés Larraya; it is supported by the National Council of Scientific Researches (CONICET) and the National Board of Mental Health. The general purpose of the program is to study the prevalence of mental disorders in different ethnographic areas within the country. Epidemiology allows the forecasting of disease occurence. A research work this area may be qualified "effective" if it provides useful data for prevention programs. Therefore, it is necessary that researches and professional responsibles of Mental Health Governmental decissions work together. This rapprochment is being attempted in developing the Argentine research program. It has a cross-cultural approach. It can be called "a way of thinking" as opposed to a precise methodology. A considerable variety of research tools are being used, depending on the specific purposes and the characteristics of the ethnographic areas. One of the main difficulties in choosing a technique for "case-finding" is uncertainty about where to place the "cut-off point" between presence and absence of illness. In this program the Present State Examination (PSE) is used in population surveys of large urban centers. It is a semi-structured interview that has been extensively tested. In small rural communities, the work is done using "key-informants" and applying the snow-ball sample technique. One specific purpose of the research is the study of the modal personality structure in each ethnographic area, formulated in terms of the Holtzman Inkblot Test. The paper shows the relationships between purposes, research tools and responsible professionals. There is hardly time or surplus intellectual energy for polemic and alienation between clinicians and social scientists. Theories, methodologies, research data and prevention programs have not developed harmoniously. We need to carry out research work not divorced from Public Health responsible authorities, in order to avoid that useful data from Epidemiological Studies will not be used in prevention programs.

Pesticide-initiated idiopathic environmental intolerance in South Korean farmers.

PubMed

Lee, Hae-Sung; Hong, So-Yong; Hong, Zoong-Rock; Gil, Hyo-Ook; Yang, Jong-Oh; Lee, Eun-Young; Han, Mi-Jung; Jang, Nam-Woon; Hong, Sae-Yong

2007-05-01

This study was designed to study patients with intolerance to pesticide smells. Ten subjects chosen were complaining of vague symptoms such as headache, dizziness, fatigue, nausea, vomiting, abdominal pain, myalgia, flu-like symptoms, etc., whenever exposed to the pesticide smells even at low intensity. To determine whether the etiology of this kind of pesticide hypersensitivity was of organic or psychiatric nature, all the subjects underwent tests as follows: complete blood cell count, urinalysis, and blood chemistry as routine tests; esophogastroduodenoscopy and abdomen ultrasonography for the gastrointestinal symptoms; chest x-ray, pulmonary function tests, and electrocardiography for the respiratory and/or cardiac symptoms; nerve conduction velocity and brain magnetic resonance imaging (MRI) for peripheral and central nerve system symptoms; and K-WAIS, Rey-Kim memory test, Rorschach, Mini Mental State Examination (MMSE), and Minnesota Multiphasic Personality Inventory (MMPI) for psychoanalysis. Of the 10 cases in which the chief complaint was headache, symptoms of two cases were caused by maxillary sinusitis. Another two showed typical multiple chemical sensitivity (MCS) or idiopathic environmental intolerance (IEI). Six out of the 10 cases, whose symptoms closely resembled the others, did not conclusively meet the criteria of classic MCS or IEI. The subjects of this case shared vague fears, both fear of pesticides and hypochondriasis. Some subjects faced financial insecurity and social uncertainty; others felt uneasy about the future of their farming life. Thus, to help verify the causes of MCS or IEI, which is strongly suggestive of pesticide smells, diagnosis needs a dual approach: on the anima and soma. Psychoanalysis can delve into the mental status of the patients to see whether the patients are aware of their symptoms. Clinical tests can see through the physical structure and functions of the organs on which patients' complaints are centered.

The expert and the foreigner: Reflections of forensic transcultural psychopathology on a total of 86 reports by experts on criminal liability.

PubMed

Merzagora, Isabella; Amadasi, Alberto; Blandino, Alberto; Travaini, Guido

In recent times Italy has been experiencing massive migration flows, therefore the attention on the issue of crimes committed by foreigners is increasing. But within trials, in the evaluation of criminal liability of foreigners, how do experts deal with them? Do the performed evaluations take cultural diversity into account? The present study took origin from these questions and examined a total of 86 reports by experts on criminal liability of foreign persons (16 females and 70 males). Examinees have been declared indictable in 31 cases (36%), totally mentally ill in 40 cases (45%) and with diminished liability in 15 cases (17%); when liability was excluded, examinees were diagnosed in 11 cases with mood disorders, in 23 cases with personality disorders, in 4 cases with adaptation disorders and post-traumatic stress disorder and in 10 cases with different diagnoses (in some cases more than one diagnosis was present). None of the reports used the section of the DSM concerning "cultural framing". Tests were used in 48 surveys (56% of cases), with more tests for each examinee, for a total of 39 Rorschach, 14 Raven test, 8 Minnesota Multiphasic Personality Inventory - MMPI - 4 Wechsler Adult Intelligence Scale - WAIS - level test, 8 Thematic Apperception test. When subjects were diagnosed with mental disorder and with diminished liability, 42 (79%) were also socially dangerous. Results highlight the importance of the relationship between the expert and the foreigner. Many factors ought to be critically considered by experts dealing with foreigners, like cultural awareness, knowledge of verbal communication, critical consideration of meanings and diagnosis, knowledge of the foreigners' personal story, presence of tests with inexact information and cultural fallacy. Copyright © 2018 Elsevier Ltd. All rights reserved.

Meta-analysis of studies assessing the efficacy of projective techniques in discriminating child sexual abuse.

PubMed

West, M M

1998-11-01

This meta-analysis of 12 studies assesses the efficacy of projective techniques to discriminate between sexually abused children and nonsexually abused children. A literature search was conducted to identify published studies that used projective instruments with sexually abused children. Those studies that reported statistics that allowed for an effect size to be calculated, were then included in the meta-analysis. There were 12 studies that fit the criteria. The projectives reviewed include The Rorschach, The Hand Test, The Thematic Apperception Test (TAT), the Kinetic Family Drawings, Human Figure Drawings, Draw Your Favorite Kind of Day, The Rosebush: A Visualization Strategy, and The House-Tree-Person. The results of this analysis gave an over-all effect size of d = .81, which is a large effect. Six studies included only a norm group of nondistressed, nonabused children with the sexual abuse group. The average effect size was d = .87, which is impressive. Six studies did include a clinical group of distressed nonsexually abused subjects and the effect size lowered to d = .76, which is a medium to large effect. This indicates that projective instruments can discriminate distressed children from nondistressed subjects, quite well. In the studies that included a clinical group of distressed children who were not sexually abused, the lower effect size indicates that the instruments were less able to discriminate the type of distress. This meta-analysis gives evidence that projective techniques have the ability to discriminate between children who have been sexually abused and those who were not abused sexually. However, further research that is designed to include clinical groups of distressed children is needed in order to determine how well the projectives can discriminate the type of distress.

History of abuse and organic difficulties in a convenience sample of 46 ultra-orthodox males with pedophilia.

PubMed

Witztum, Eliezer; Daie, Netzer; Daie-Gabai, Ayala; Rosler, Ariel

2012-01-01

Evidence has started to accumulate that relates pedophilia to a history of being a victim of sexual abuse as well as to comorbidity with organic vulnerabilities. During a naturalistic study regarding treatment of pedophilia, the authors had access to clinical and psychodiagnostic evaluations of Israeli Jewish ultraorthodox male pedophiles outside the forensic system. Using psychiatric examination as well as a battery of psychological tests, presence of history of trauma as well as comorbidity with organic vulnerabilities among this unique sub-group was examined. This survey was part of a larger scale research on the effectiveness of Decapeptyl injections as treatment for pedophilia. All participants in the original research underwent comprehensive psychological assessment including an extensive clinical interview as well as psychological tests (Bender, Rorschach and TAT). Of the patients participating in the research, this survey focused on the group of 46 ultra-orthodox male pedophiles. Cross-tabs analyses were conducted in order to examine prevalence of history of trauma and organic vulnerabilities in this specific group. Based on self reports combined with corroborating reports (obtained from parents, educators and medical staff), together with indications in psychological tests, we found that 82.6% of participants were victims of sexual trauma as children and 87% suffer from some kind of organic vulnerability (learning disabilities, disinhibitions, etc.). LIMITATIONS of this small convenience sample that influence ability to generalize are discussed. The current survey indicates that in this sample, the ultra-orthodox male pedophile was frequently a victim of childhood sexual trauma, and exhibited indications of organic vulnerabilities. This is more pronounced than findings in previous studies, and calls for further research in order to understand the underlying causes.

[Social psychological determinants of the formation of medical students' professional identity. Possibilities of development].

PubMed

Csörsz, Ilona

2011-03-20

Systematic observations regarding techniques of medical career-socialization has hardly ever appeared in Hungarian technical literature yet. Focusing on the need for practical medical training the author elaborated a career-socialization program consisting of a three-level, three-branch training technique. This consisted of a Junior Bálint-group, an imaginative visualization technique, and an expressive, drama-pedagogical working method completed with a projective technique. This career-socialization program focuses on the physician's personality, capability-expansion in relationship management, and practicing a set of professional behavior-roles. During the empirical observations connected to the work the author examined medical students' patient-representation, their relation to the patients, and the development of the physician's professional character. Within the frames of this three-level, three-branch training technique program it enables us to observe which training technique is able to reveal all those psychological qualities that can contribute to the conformation of the representations, thus to the process of career-socialization in the most effective way. The content-analyses of the cases of Junior Bálint-groups (n = 60) revealed that the most frequent problems are fear of intimacy, of bodily contact, communication with patients in a chronic or terminal state, and the fear of medical practice. The content-analyses of imaginary patient-images (n = 62) with Rorschach-signs confirmed that the psychological burdens mentioned above are the most serious problems for medical students. The process-, and content-analyses of drama-games, the integrative healing contact training groups (n = 74) showed that group work primarily intensifies the relationship responsiveness, the ability to adopt the other's (the patient's) viewpoints, and enables an involuntary and distressless identification with the patient and the physician, both agents in the healing relationship. It is the drama-game that gives significant support to experience the physician- patient relationship in a high quality level. In the next phase the author tested the short story used for the drama-game and its projective contents on a sample of medical and psychology students (n = 313). For the statistical analysis the SPSS and the LEM program-packets were applied. Statistical methods included variance analysis, chi-square test and log-linear analysis. The vast similarity of the projective contents appearing in the survey questionnaire and in the drama-group verified that the chosen short story as a projective surface is suitable for recalling the students' typical stereotypes and representations related to diseases, patients, healing experts and therapeutic situations. The drama-group focused on the realization of these stereotypical representations, and also on experiencing and forming the students' emotional relations to them.

PREFACE: 13th International Conference on Muon Spin Rotation, Relaxation and Resonance

NASA Astrophysics Data System (ADS)

2014-12-01

The 13th International Conference on Muon Spin Rotation, Relaxation and Resonance (μSR2014) organized by the Laboratory for Muon Spin Spectroscopy, Paul Scherrer Institute in collaboration with the University of Zurich and the University of Fribourg, was held in Grindelwald, Switzerland from 1st to 6th June 2014. The conference provided a forum for researchers from around the world with interests in the applications of μSR to study a wide range of topics including condensed matter physics, materials and molecular sciences, chemistry and biology. Polarized muons provide a unique and versatile probe of matter, enabling studies at the atomic level of electronic structure and dynamics in a wide range of systems. The conference was the thirteenth in a series, which began in Rorschach in 1978 and it took place for the third time in Switzerland. The previous conferences were held in Cancun, Mexico (2011), Tsukuba, Japan (2008), Oxford, UK (2005), Williamsburg, USA (2002), Les Diablerets, Switzerland (1999), Nikko, Japan (1996), Maui, USA (1993), Oxford, UK (1990), Uppsala, Sweden (1986), Shimoda, Japan (1983), Vancouver, Canada (1980), and Rorschach, Switzerland (1978). These conference proceedings contain 67 refereed publications from presentations covering magnetism, superconductivity, chemistry, semiconductors, biophysics and techniques. The conference logo, displayed in the front pages of these proceedings, represents both the location of μSR2014 in the Alps and the muon-spin rotation technique. The silhouette represents the famous local mountains Eiger, Mönch and Jungfrau as drawn by the Swiss painter Ferdinand Hodler and the apple with arrow is at the same time a citation of the Wilhelm Tell legend and a remembrance of the key role played by the muon spin and the asymmetric muon decay (which for the highest positron energy has an apple like shape). More than 160 participants (including 32 registered as students and 13 as accompanying persons) from 19 countries submitted 227 contributions, which were intensively discussed during day and evening sessions. The scientific program was centered around invited talks from speakers outside the μSR community, who presented lectures on topics where μSR is giving or expected to give significant contributions. The invited speakers, covering various fields of interest, included Radu Coldea (Oxford, Quantum Magnetism), Claude- Henri Delmas (Bordeaux, Electro- and Solid State Chemistry), Dirk Johrendt (Munich, Iron Based Materials), Marc-Henri Julien (Grenoble, Cuprate Superconductors), Manfred Fiebig (Zürich, Multiferroics), Allan MacDonald (Austin, Topological Electronic States), Hidenori Takagi (Stuttgart and Tokyo, Transition Metal Oxides), and Jean-Marc Triscone (Geneva, Oxide Heterostructures). In addition to an overview about status and progress of the existing facilities in Europe, Canada and Japan, future projects and new ideas for μSR facilities in South Korea, China and the USA were presented. A special evening session was held to discuss about muon site and muon states calculations by DFT and other techniques. Several talks and posters can be found on the conference web page www.psi.ch/muSR2014. In a ceremony at the beginning of the conference, Roberto De Renzi from the University of Parma was awarded the 2014 Yamazaki Prize for muon science by the International Society for Muon Spin Spectroscopy (ISMS) for his sustained and exceptional contributions to the development of the muon spin relaxation technique to investigate magnetism and superconductivity and for promoting synergies between μSR and NMR. In the closing session Rob Kie (UBC Vancouver and TRIUMF) very effectively summarized the five days of meeting, while giving an enlightening personal impression. In the same session five best poster prizes were awarded and ISMS gave two prizes to young researchers presenting outstanding work at the conference. The conference organizers also on behalf of the entire μSR community are extremely grateful to the conference sponsors: PSI, University of Zürich, University of Fribourg and the Swiss National Foundation as well as to the various industrial sponsors, which are listed in these proceedings. Special mention should also be made of the local organizing committee who has been active during a long period first preparing and then running the conference. Finally we would like to thank the participants whose stimulating research presentations and lively discussion made μSR2014 such a success.

Prevention of traffic accidents: the assessment of perceptual-motor alterations before obtaining a driving license. A longitudinal study of the first years of driving.

PubMed

Martín, Fermina Sánchez; Estévez, M Angeles Quiroga

2005-03-01

A longitudinal study was designed with two objectives: first, to provide a wide cognitive, personality and social description of new drivers before they started to drive cars. Second, to examine the relationship between cognitive and other characteristics drivers had before obtaining their driving license and the number and type of accidents they were involved in during the first years as drivers. The longitudinal study started in 1997 and ended in 2002. The first assessment was made up of 241 individuals at the time they enrolled on the driving course. The follow-up evaluation in the year 2002 was carried out on 144 components of the initial sample after five years driving. Age, gender and education level were matched to represent the population of Spain. Participants were assessed with the Bender Test for visual-motor ability, the B101 Test for practical intelligence, the B19 Test for visual-motor bi-manual coordination, and the TKK-1108 for speed anticipation. Personality was also evaluated with the Rorschach test and the PSY (Psychological Assessment Questionnaire). Five years later, a new examination of all those variables was made as well as a structured interview with each participant in order to collect data relating to significant life events during that time, driving habits, opinions in relation to certain traffic rules and information on accidents, incidents and/or sanctions. Serious and/or minor accidents are concentrated on a few drivers. Accidentality is not related to gender or age, but educational level is related to serious accidents. The number of accidents (severe or minor ones) cannot be predicted if considered as a continuous variable, but it is possible if considered as a discrete variable. In this case two different cognitive profiles account for the number and type of accidents. The number and type of accidents during their first years of driving are related to the cognitive profiles of drivers assessed before they obtained their driving license.

Investigation of the speed of reaction on external stimulus in schizophrenic psychosis.

PubMed

Zampera, E

1997-06-01

In 30 schizophrenic examinees, the latention time was measured. This time is referred to as an interval between the start of the stimulus and the response to the stimulus in the skin-galvanic reflex. Elementary stimulation has been applied, using device's timer tone and clapping of hands, which should simulate and associate the thunderclap. The intensity of psychosis was measured according to the Metric scale of psychotic behavior by Rogina, while the intensity of anxiety was measured by psychological tests: Rorschach's psycho-diagnostic test and Spillberger's questionnaire for anxiety. The reaction to the stimulus and latention time were registered using polygraph unit in order to record skin-galvanic reflex. The research was performed at two separate time points: prior to the therapy with derivatives of the phenothiazine group (the experimental examination group), and 25 days after the therapy (control group). The research has shown that the latention time in schizophrenic examinees does not significantly differ from the corresponding time in healthy controls, and it averages 2.30 seconds. Furthermore, no statistically significant difference in latention time before and after the therapy was observed. However, before the therapy started, i.e. in experimental group," the examinees who were psychotic to a greater extent have shown longer latention than those less psychotic. Additional finding was that the examinees from experimental group who were more anxious according to psychological tests have also shown longer latention time. After the therapy, the reaction to the external stimulus was stronger, which was expressed in increased reaction amplitude in skin-galvanic reflex. The latention time was prolonged, especially in case of examinees that were psychotic to a smaller extent before the therapy. We can conclude that so-called transformed psychotic anxiety was replaced after the therapy with a "new" anxiety-existential fear, i.e. the stronger anxious expectation and confusion appeared because the anxiety in its "free-floating" form remained very high. After the therapy, psychotic protection failed to appear and the reaction characteristics are a consequence of the delaying the confrontation with reality, which was registered as a prolonged latention time, i.e. response to external stimulus.

Evaluation of Two New Smoothing Methods in Equating: The Cubic B-Spline Presmoothing Method and the Direct Presmoothing Method

ERIC Educational Resources Information Center

Cui, Zhongmin; Kolen, Michael J.

2009-01-01

This article considers two new smoothing methods in equipercentile equating, the cubic B-spline presmoothing method and the direct presmoothing method. Using a simulation study, these two methods are compared with established methods, the beta-4 method, the polynomial loglinear method, and the cubic spline postsmoothing method, under three sample…

Comparison of DNA extraction methods for meat analysis.

PubMed

Yalçınkaya, Burhanettin; Yumbul, Eylem; Mozioğlu, Erkan; Akgoz, Muslum

2017-04-15

Preventing adulteration of meat and meat products with less desirable or objectionable meat species is important not only for economical, religious and health reasons, but also, it is important for fair trade practices, therefore, several methods for identification of meat and meat products have been developed. In the present study, ten different DNA extraction methods, including Tris-EDTA Method, a modified Cetyltrimethylammonium Bromide (CTAB) Method, Alkaline Method, Urea Method, Salt Method, Guanidinium Isothiocyanate (GuSCN) Method, Wizard Method, Qiagen Method, Zymogen Method and Genespin Method were examined to determine their relative effectiveness for extracting DNA from meat samples. The results show that the salt method is easy to perform, inexpensive and environmentally friendly. Additionally, it has the highest yield among all the isolation methods tested. We suggest this method as an alternative method for DNA isolation from meat and meat products. Copyright © 2016 Elsevier Ltd. All rights reserved.

Study of New Method Combined Ultra-High Frequency (UHF) Method and Ultrasonic Method on PD Detection for GIS

NASA Astrophysics Data System (ADS)

Li, Yanran; Chen, Duo; Zhang, Jiwei; Chen, Ning; Li, Xiaoqi; Gong, Xiaojing

2017-09-01

GIS (gas insulated switchgear), is an important equipment in power system. Partial discharge plays an important role in detecting the insulation performance of GIS. UHF method and ultrasonic method frequently used in partial discharge (PD) detection for GIS. It is necessary to investigate UHF method and ultrasonic method for partial discharge in GIS. However, very few studies have been conducted on the method combined this two methods. From the view point of safety, a new method based on UHF method and ultrasonic method of PD detection for GIS is proposed in order to greatly enhance the ability of anti-interference of signal detection and the accuracy of fault localization. This paper presents study aimed at clarifying the effect of the new method combined UHF method and ultrasonic method. Partial discharge tests were performed in laboratory simulated environment. Obtained results show the ability of anti-interference of signal detection and the accuracy of fault localization for this new method combined UHF method and ultrasonic method.

The multigrid preconditioned conjugate gradient method

NASA Technical Reports Server (NTRS)

Tatebe, Osamu

1993-01-01

A multigrid preconditioned conjugate gradient method (MGCG method), which uses the multigrid method as a preconditioner of the PCG method, is proposed. The multigrid method has inherent high parallelism and improves convergence of long wavelength components, which is important in iterative methods. By using this method as a preconditioner of the PCG method, an efficient method with high parallelism and fast convergence is obtained. First, it is considered a necessary condition of the multigrid preconditioner in order to satisfy requirements of a preconditioner of the PCG method. Next numerical experiments show a behavior of the MGCG method and that the MGCG method is superior to both the ICCG method and the multigrid method in point of fast convergence and high parallelism. This fast convergence is understood in terms of the eigenvalue analysis of the preconditioned matrix. From this observation of the multigrid preconditioner, it is realized that the MGCG method converges in very few iterations and the multigrid preconditioner is a desirable preconditioner of the conjugate gradient method.

Energy minimization in medical image analysis: Methodologies and applications.

PubMed

Zhao, Feng; Xie, Xianghua

2016-02-01

Energy minimization is of particular interest in medical image analysis. In the past two decades, a variety of optimization schemes have been developed. In this paper, we present a comprehensive survey of the state-of-the-art optimization approaches. These algorithms are mainly classified into two categories: continuous method and discrete method. The former includes Newton-Raphson method, gradient descent method, conjugate gradient method, proximal gradient method, coordinate descent method, and genetic algorithm-based method, while the latter covers graph cuts method, belief propagation method, tree-reweighted message passing method, linear programming method, maximum margin learning method, simulated annealing method, and iterated conditional modes method. We also discuss the minimal surface method, primal-dual method, and the multi-objective optimization method. In addition, we review several comparative studies that evaluate the performance of different minimization techniques in terms of accuracy, efficiency, or complexity. These optimization techniques are widely used in many medical applications, for example, image segmentation, registration, reconstruction, motion tracking, and compressed sensing. We thus give an overview on those applications as well. Copyright © 2015 John Wiley & Sons, Ltd.

[Comparative study on four kinds of assessment methods of post-marketing safety of Danhong injection].

PubMed

Li, Xuelin; Tang, Jinfa; Meng, Fei; Li, Chunxiao; Xie, Yanming

2011-10-01

To study the adverse reaction of Danhong injection with four kinds of methods, central monitoring method, chart review method, literature study method and spontaneous reporting method, and to compare the differences between them, explore an appropriate method to carry out post-marketing safety evaluation of traditional Chinese medicine injection. Set down the adverse reactions' questionnaire of four kinds of methods, central monitoring method, chart review method, literature study method and collect the information on adverse reactions in a certain period. Danhong injection adverse reaction information from Henan Province spontaneous reporting system was collected with spontaneous reporting method. Carry on data summary and descriptive analysis. Study the adverse reaction of Danhong injection with four methods of central monitoring method, chart review method, literature study method and spontaneous reporting method, the rates of adverse events were 0.993%, 0.336%, 0.515%, 0.067%, respectively. Cyanosis, arrhythmia, hypotension, sweating, erythema, hemorrhage dermatitis, rash, irritability, bleeding gums, toothache, tinnitus, asthma, elevated aminotransferases, constipation, pain are new discovered adverse reactions. The central monitoring method is the appropriate method to carry out post-marketing safety evaluation of traditional Chinese medicine injection, which could objectively reflect the real world of clinical usage.

Ensemble Methods for MiRNA Target Prediction from Expression Data.

PubMed

Le, Thuc Duy; Zhang, Junpeng; Liu, Lin; Li, Jiuyong

2015-01-01

microRNAs (miRNAs) are short regulatory RNAs that are involved in several diseases, including cancers. Identifying miRNA functions is very important in understanding disease mechanisms and determining the efficacy of drugs. An increasing number of computational methods have been developed to explore miRNA functions by inferring the miRNA-mRNA regulatory relationships from data. Each of the methods is developed based on some assumptions and constraints, for instance, assuming linear relationships between variables. For such reasons, computational methods are often subject to the problem of inconsistent performance across different datasets. On the other hand, ensemble methods integrate the results from individual methods and have been proved to outperform each of their individual component methods in theory. In this paper, we investigate the performance of some ensemble methods over the commonly used miRNA target prediction methods. We apply eight different popular miRNA target prediction methods to three cancer datasets, and compare their performance with the ensemble methods which integrate the results from each combination of the individual methods. The validation results using experimentally confirmed databases show that the results of the ensemble methods complement those obtained by the individual methods and the ensemble methods perform better than the individual methods across different datasets. The ensemble method, Pearson+IDA+Lasso, which combines methods in different approaches, including a correlation method, a causal inference method, and a regression method, is the best performed ensemble method in this study. Further analysis of the results of this ensemble method shows that the ensemble method can obtain more targets which could not be found by any of the single methods, and the discovered targets are more statistically significant and functionally enriched. The source codes, datasets, miRNA target predictions by all methods, and the ground truth for validation are available in the Supplementary materials.

Ensemble Methods for MiRNA Target Prediction from Expression Data

PubMed Central

Le, Thuc Duy; Zhang, Junpeng; Liu, Lin; Li, Jiuyong

2015-01-01

Background microRNAs (miRNAs) are short regulatory RNAs that are involved in several diseases, including cancers. Identifying miRNA functions is very important in understanding disease mechanisms and determining the efficacy of drugs. An increasing number of computational methods have been developed to explore miRNA functions by inferring the miRNA-mRNA regulatory relationships from data. Each of the methods is developed based on some assumptions and constraints, for instance, assuming linear relationships between variables. For such reasons, computational methods are often subject to the problem of inconsistent performance across different datasets. On the other hand, ensemble methods integrate the results from individual methods and have been proved to outperform each of their individual component methods in theory. Results In this paper, we investigate the performance of some ensemble methods over the commonly used miRNA target prediction methods. We apply eight different popular miRNA target prediction methods to three cancer datasets, and compare their performance with the ensemble methods which integrate the results from each combination of the individual methods. The validation results using experimentally confirmed databases show that the results of the ensemble methods complement those obtained by the individual methods and the ensemble methods perform better than the individual methods across different datasets. The ensemble method, Pearson+IDA+Lasso, which combines methods in different approaches, including a correlation method, a causal inference method, and a regression method, is the best performed ensemble method in this study. Further analysis of the results of this ensemble method shows that the ensemble method can obtain more targets which could not be found by any of the single methods, and the discovered targets are more statistically significant and functionally enriched. The source codes, datasets, miRNA target predictions by all methods, and the ground truth for validation are available in the Supplementary materials. PMID:26114448

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., Breaking of Woven Cloth; Grab Method. (ii) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (iii) Method 5134, Strength of Cloth, Tearing; Tongue Method. (iv) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (v) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Elongation, Breaking of Woven Cloth; Grab Method. (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (3) Method 5134, Strength of Cloth, Tearing; Tongue Method. (4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (5) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., Breaking of Woven Cloth; Grab Method. (ii) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (iii) Method 5134, Strength of Cloth, Tearing; Tongue Method. (iv) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (v) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Elongation, Breaking of Woven Cloth; Grab Method. (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (3) Method 5134, Strength of Cloth, Tearing; Tongue Method. (4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (5) Method 5762, Mildew Resistance of Textile Materials...

Methods for analysis of cracks in three-dimensional solids

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1984-01-01

Various analytical and numerical methods used to evaluate the stress intensity factors for cracks in three-dimensional (3-D) solids are reviewed. Classical exact solutions and many of the approximate methods used in 3-D analyses of cracks are reviewed. The exact solutions for embedded elliptic cracks in infinite solids are discussed. The approximate methods reviewed are the finite element methods, the boundary integral equation (BIE) method, the mixed methods (superposition of analytical and finite element method, stress difference method, discretization-error method, alternating method, finite element-alternating method), and the line-spring model. The finite element method with singularity elements is the most widely used method. The BIE method only needs modeling of the surfaces of the solid and so is gaining popularity. The line-spring model appears to be the quickest way to obtain good estimates of the stress intensity factors. The finite element-alternating method appears to yield the most accurate solution at the minimum cost.

Development and validation of spectrophotometric methods for estimating amisulpride in pharmaceutical preparations.

PubMed

Sharma, Sangita; Neog, Madhurjya; Prajapati, Vipul; Patel, Hiren; Dabhi, Dipti

2010-01-01

Five simple, sensitive, accurate and rapid visible spectrophotometric methods (A, B, C, D and E) have been developed for estimating Amisulpride in pharmaceutical preparations. These are based on the diazotization of Amisulpride with sodium nitrite and hydrochloric acid, followed by coupling with N-(1-naphthyl)ethylenediamine dihydrochloride (Method A), diphenylamine (Method B), beta-naphthol in an alkaline medium (Method C), resorcinol in an alkaline medium (Method D) and chromotropic acid in an alkaline medium (Method E) to form a colored chromogen. The absorption maxima, lambda(max), are at 523 nm for Method A, 382 and 490 nm for Method B, 527 nm for Method C, 521 nm for Method D and 486 nm for Method E. Beer's law was obeyed in the concentration range of 2.5-12.5 microg mL(-1) in Method A, 5-25 and 10-50 microg mL(-1) in Method B, 4-20 microg mL(-1) in Method C, 2.5-12.5 microg mL(-1) in Method D and 5-15 microg mL(-1) in Method E. The results obtained for the proposed methods are in good agreement with labeled amounts, when marketed pharmaceutical preparations were analyzed.

Reconstruction of fluorescence molecular tomography with a cosinoidal level set method.

PubMed

Zhang, Xuanxuan; Cao, Xu; Zhu, Shouping

2017-06-27

Implicit shape-based reconstruction method in fluorescence molecular tomography (FMT) is capable of achieving higher image clarity than image-based reconstruction method. However, the implicit shape method suffers from a low convergence speed and performs unstably due to the utilization of gradient-based optimization methods. Moreover, the implicit shape method requires priori information about the number of targets. A shape-based reconstruction scheme of FMT with a cosinoidal level set method is proposed in this paper. The Heaviside function in the classical implicit shape method is replaced with a cosine function, and then the reconstruction can be accomplished with the Levenberg-Marquardt method rather than gradient-based methods. As a result, the priori information about the number of targets is not required anymore and the choice of step length is avoided. Numerical simulations and phantom experiments were carried out to validate the proposed method. Results of the proposed method show higher contrast to noise ratios and Pearson correlations than the implicit shape method and image-based reconstruction method. Moreover, the number of iterations required in the proposed method is much less than the implicit shape method. The proposed method performs more stably, provides a faster convergence speed than the implicit shape method, and achieves higher image clarity than the image-based reconstruction method.

A Generalized Pivotal Quantity Approach to Analytical Method Validation Based on Total Error.

PubMed

Yang, Harry; Zhang, Jianchun

2015-01-01

The primary purpose of method validation is to demonstrate that the method is fit for its intended use. Traditionally, an analytical method is deemed valid if its performance characteristics such as accuracy and precision are shown to meet prespecified acceptance criteria. However, these acceptance criteria are not directly related to the method's intended purpose, which is usually a gurantee that a high percentage of the test results of future samples will be close to their true values. Alternate "fit for purpose" acceptance criteria based on the concept of total error have been increasingly used. Such criteria allow for assessing method validity, taking into account the relationship between accuracy and precision. Although several statistical test methods have been proposed in literature to test the "fit for purpose" hypothesis, the majority of the methods are not designed to protect the risk of accepting unsuitable methods, thus having the potential to cause uncontrolled consumer's risk. In this paper, we propose a test method based on generalized pivotal quantity inference. Through simulation studies, the performance of the method is compared to five existing approaches. The results show that both the new method and the method based on β-content tolerance interval with a confidence level of 90%, hereafter referred to as the β-content (0.9) method, control Type I error and thus consumer's risk, while the other existing methods do not. It is further demonstrated that the generalized pivotal quantity method is less conservative than the β-content (0.9) method when the analytical methods are biased, whereas it is more conservative when the analytical methods are unbiased. Therefore, selection of either the generalized pivotal quantity or β-content (0.9) method for an analytical method validation depends on the accuracy of the analytical method. It is also shown that the generalized pivotal quantity method has better asymptotic properties than all of the current methods. Analytical methods are often used to ensure safety, efficacy, and quality of medicinal products. According to government regulations and regulatory guidelines, these methods need to be validated through well-designed studies to minimize the risk of accepting unsuitable methods. This article describes a novel statistical test for analytical method validation, which provides better protection for the risk of accepting unsuitable analytical methods. © PDA, Inc. 2015.

Method Engineering: A Service-Oriented Approach

NASA Astrophysics Data System (ADS)

Cauvet, Corine

In the past, a large variety of methods have been published ranging from very generic frameworks to methods for specific information systems. Method Engineering has emerged as a research discipline for designing, constructing and adapting methods for Information Systems development. Several approaches have been proposed as paradigms in method engineering. The meta modeling approach provides means for building methods by instantiation, the component-based approach aims at supporting the development of methods by using modularization constructs such as method fragments, method chunks and method components. This chapter presents an approach (SO2M) for method engineering based on the service paradigm. We consider services as autonomous computational entities that are self-describing, self-configuring and self-adapting. They can be described, published, discovered and dynamically composed for processing a consumer's demand (a developer's requirement). The method service concept is proposed to capture a development process fragment for achieving a goal. Goal orientation in service specification and the principle of service dynamic composition support method construction and method adaptation to different development contexts.

Simultaneous determination of a binary mixture of pantoprazole sodium and itopride hydrochloride by four spectrophotometric methods.

PubMed

Ramadan, Nesrin K; El-Ragehy, Nariman A; Ragab, Mona T; El-Zeany, Badr A

2015-02-25

Four simple, sensitive, accurate and precise spectrophotometric methods were developed for the simultaneous determination of a binary mixture containing Pantoprazole Sodium Sesquihydrate (PAN) and Itopride Hydrochloride (ITH). Method (A) is the derivative ratio method ((1)DD), method (B) is the mean centering of ratio spectra method (MCR), method (C) is the ratio difference method (RD) and method (D) is the isoabsorptive point coupled with third derivative method ((3)D). Linear correlation was obtained in range 8-44 μg/mL for PAN by the four proposed methods, 8-40 μg/mL for ITH by methods A, B and C and 10-40 μg/mL for ITH by method D. The suggested methods were validated according to ICH guidelines. The obtained results were statistically compared with those obtained by the official and a reported method for PAN and ITH, respectively, showing no significant difference with respect to accuracy and precision. Copyright © 2014 Elsevier B.V. All rights reserved.

Simultaneous determination of a binary mixture of pantoprazole sodium and itopride hydrochloride by four spectrophotometric methods

NASA Astrophysics Data System (ADS)

Ramadan, Nesrin K.; El-Ragehy, Nariman A.; Ragab, Mona T.; El-Zeany, Badr A.

2015-02-01

Four simple, sensitive, accurate and precise spectrophotometric methods were developed for the simultaneous determination of a binary mixture containing Pantoprazole Sodium Sesquihydrate (PAN) and Itopride Hydrochloride (ITH). Method (A) is the derivative ratio method (1DD), method (B) is the mean centering of ratio spectra method (MCR), method (C) is the ratio difference method (RD) and method (D) is the isoabsorptive point coupled with third derivative method (3D). Linear correlation was obtained in range 8-44 μg/mL for PAN by the four proposed methods, 8-40 μg/mL for ITH by methods A, B and C and 10-40 μg/mL for ITH by method D. The suggested methods were validated according to ICH guidelines. The obtained results were statistically compared with those obtained by the official and a reported method for PAN and ITH, respectively, showing no significant difference with respect to accuracy and precision.

Evaluating the efficiency of spectral resolution of univariate methods manipulating ratio spectra and comparing to multivariate methods: An application to ternary mixture in common cold preparation

NASA Astrophysics Data System (ADS)

Moustafa, Azza Aziz; Salem, Hesham; Hegazy, Maha; Ali, Omnia

2015-02-01

Simple, accurate, and selective methods have been developed and validated for simultaneous determination of a ternary mixture of Chlorpheniramine maleate (CPM), Pseudoephedrine HCl (PSE) and Ibuprofen (IBF), in tablet dosage form. Four univariate methods manipulating ratio spectra were applied, method A is the double divisor-ratio difference spectrophotometric method (DD-RD). Method B is double divisor-derivative ratio spectrophotometric method (DD-RD). Method C is derivative ratio spectrum-zero crossing method (DRZC), while method D is mean centering of ratio spectra (MCR). Two multivariate methods were also developed and validated, methods E and F are Principal Component Regression (PCR) and Partial Least Squares (PLSs). The proposed methods have the advantage of simultaneous determination of the mentioned drugs without prior separation steps. They were successfully applied to laboratory-prepared mixtures and to commercial pharmaceutical preparation without any interference from additives. The proposed methods were validated according to the ICH guidelines. The obtained results were statistically compared with the official methods where no significant difference was observed regarding both accuracy and precision.

Methods for elimination of dampness in Building walls

NASA Astrophysics Data System (ADS)

Campian, Cristina; Pop, Maria

2016-06-01

Dampness elimination in building walls is a very sensitive problem, with high costs. Many methods are used, as: chemical method, electro osmotic method or physical method. The RECON method is a representative and a sustainable method in Romania. Italy has the most radical method from all methods. The technology consists in cutting the brick walls, insertion of a special plastic sheeting and injection of a pre-mixed anti-shrinking mortar.

A comparison of several methods of solving nonlinear regression groundwater flow problems

USGS Publications Warehouse

Cooley, Richard L.

1985-01-01

Computational efficiency and computer memory requirements for four methods of minimizing functions were compared for four test nonlinear-regression steady state groundwater flow problems. The fastest methods were the Marquardt and quasi-linearization methods, which required almost identical computer times and numbers of iterations; the next fastest was the quasi-Newton method, and last was the Fletcher-Reeves method, which did not converge in 100 iterations for two of the problems. The fastest method per iteration was the Fletcher-Reeves method, and this was followed closely by the quasi-Newton method. The Marquardt and quasi-linearization methods were slower. For all four methods the speed per iteration was directly related to the number of parameters in the model. However, this effect was much more pronounced for the Marquardt and quasi-linearization methods than for the other two. Hence the quasi-Newton (and perhaps Fletcher-Reeves) method might be more efficient than either the Marquardt or quasi-linearization methods if the number of parameters in a particular model were large, although this remains to be proven. The Marquardt method required somewhat less central memory than the quasi-linearization metilod for three of the four problems. For all four problems the quasi-Newton method required roughly two thirds to three quarters of the memory required by the Marquardt method, and the Fletcher-Reeves method required slightly less memory than the quasi-Newton method. Memory requirements were not excessive for any of the four methods.

Hybrid DFP-CG method for solving unconstrained optimization problems

NASA Astrophysics Data System (ADS)

Osman, Wan Farah Hanan Wan; Asrul Hery Ibrahim, Mohd; Mamat, Mustafa

2017-09-01

The conjugate gradient (CG) method and quasi-Newton method are both well known method for solving unconstrained optimization method. In this paper, we proposed a new method by combining the search direction between conjugate gradient method and quasi-Newton method based on BFGS-CG method developed by Ibrahim et al. The Davidon-Fletcher-Powell (DFP) update formula is used as an approximation of Hessian for this new hybrid algorithm. Numerical result showed that the new algorithm perform well than the ordinary DFP method and proven to posses both sufficient descent and global convergence properties.

Generalization of the Engineering Method to the UNIVERSAL METHOD.

ERIC Educational Resources Information Center

Koen, Billy Vaughn

1987-01-01

Proposes that there is a universal method for all realms of knowledge. Reviews Descartes's definition of the universal method, the engineering definition, and the philosophical basis for the universal method. Contends that the engineering method best represents the universal method. (ML)

Colloidal Electrolytes and the Critical Micelle Concentration

ERIC Educational Resources Information Center

Knowlton, L. G.

1970-01-01

Describes methods for determining the Critical Micelle Concentration of Colloidal Electrolytes; methods described are: (1) methods based on Colligative Properties, (2) methods based on the Electrical Conductivity of Colloidal Electrolytic Solutions, (3) Dye Method, (4) Dye Solubilization Method, and (5) Surface Tension Method. (BR)

Theoretical analysis of three methods for calculating thermal insulation of clothing from thermal manikin.

PubMed

Huang, Jianhua

2012-07-01

There are three methods for calculating thermal insulation of clothing measured with a thermal manikin, i.e. the global method, the serial method, and the parallel method. Under the condition of homogeneous clothing insulation, these three methods yield the same insulation values. If the local heat flux is uniform over the manikin body, the global and serial methods provide the same insulation value. In most cases, the serial method gives a higher insulation value than the global method. There is a possibility that the insulation value from the serial method is lower than the value from the global method. The serial method always gives higher insulation value than the parallel method. The insulation value from the parallel method is higher or lower than the value from the global method, depending on the relationship between the heat loss distribution and the surface temperatures. Under the circumstance of uniform surface temperature distribution over the manikin body, the global and parallel methods give the same insulation value. If the constant surface temperature mode is used in the manikin test, the parallel method can be used to calculate the thermal insulation of clothing. If the constant heat flux mode is used in the manikin test, the serial method can be used to calculate the thermal insulation of clothing. The global method should be used for calculating thermal insulation of clothing for all manikin control modes, especially for thermal comfort regulation mode. The global method should be chosen by clothing manufacturers for labelling their products. The serial and parallel methods provide more information with respect to the different parts of clothing.

Comparison of five methods for the estimation of methane production from vented in vitro systems.

PubMed

Alvarez Hess, P S; Eckard, R J; Jacobs, J L; Hannah, M C; Moate, P J

2018-05-23

There are several methods for estimating methane production (MP) from feedstuffs in vented in vitro systems. One method (A; "gold standard") measures methane proportions in the incubation bottle's head space (HS) and in the vented gas collected in gas bags. Four other methods (B, C, D and E) measure methane proportion in a single gas sample from HS. Method B assumes the same methane proportion in the vented gas as in HS, method C assumes constant methane to carbon dioxide ratio, method D has been developed based on empirical data and method E assumes constant individual venting volumes. This study aimed to compare the MP predictions from these methods to that of the gold standard method under different incubation scenarios, to validate these methods based on their concordance with a gold standard method. Methods C, D and E had greater concordance (0.85, 0.88 and 0.81), lower root mean square error (RMSE) (0.80, 0.72 and 0.85) and lower mean bias (0.20, 0.35, -0.35) with the gold standard than did method B (concordance 0.67, RMSE 1.49 and mean bias 1.26). Methods D and E were simpler to perform than method C and method D was slightly more accurate than method E. Based on precision, accuracy and simplicity of implementation, it is recommended that, when method A cannot be used, methods D and E are preferred to estimate MP from vented in vitro systems. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Kennard-Stone combined with least square support vector machine method for noncontact discriminating human blood species

NASA Astrophysics Data System (ADS)

Zhang, Linna; Li, Gang; Sun, Meixiu; Li, Hongxiao; Wang, Zhennan; Li, Yingxin; Lin, Ling

2017-11-01

Identifying whole bloods to be either human or nonhuman is an important responsibility for import-export ports and inspection and quarantine departments. Analytical methods and DNA testing methods are usually destructive. Previous studies demonstrated that visible diffuse reflectance spectroscopy method can realize noncontact human and nonhuman blood discrimination. An appropriate method for calibration set selection was very important for a robust quantitative model. In this paper, Random Selection (RS) method and Kennard-Stone (KS) method was applied in selecting samples for calibration set. Moreover, proper stoichiometry method can be greatly beneficial for improving the performance of classification model or quantification model. Partial Least Square Discrimination Analysis (PLSDA) method was commonly used in identification of blood species with spectroscopy methods. Least Square Support Vector Machine (LSSVM) was proved to be perfect for discrimination analysis. In this research, PLSDA method and LSSVM method was used for human blood discrimination. Compared with the results of PLSDA method, this method could enhance the performance of identified models. The overall results convinced that LSSVM method was more feasible for identifying human and animal blood species, and sufficiently demonstrated LSSVM method was a reliable and robust method for human blood identification, and can be more effective and accurate.

A Novel Method to Identify Differential Pathways in Hippocampus Alzheimer's Disease.

PubMed

Liu, Chun-Han; Liu, Lian

2017-05-08

BACKGROUND Alzheimer's disease (AD) is the most common type of dementia. The objective of this paper is to propose a novel method to identify differential pathways in hippocampus AD. MATERIAL AND METHODS We proposed a combined method by merging existed methods. Firstly, pathways were identified by four known methods (DAVID, the neaGUI package, the pathway-based co-expressed method, and the pathway network approach), and differential pathways were evaluated through setting weight thresholds. Subsequently, we combined all pathways by a rank-based algorithm and called the method the combined method. Finally, common differential pathways across two or more of five methods were selected. RESULTS Pathways obtained from different methods were also different. The combined method obtained 1639 pathways and 596 differential pathways, which included all pathways gained from the four existing methods; hence, the novel method solved the problem of inconsistent results. Besides, a total of 13 common pathways were identified, such as metabolism, immune system, and cell cycle. CONCLUSIONS We have proposed a novel method by combining four existing methods based on a rank product algorithm, and identified 13 significant differential pathways based on it. These differential pathways might provide insight into treatment and diagnosis of hippocampus AD.

Improved accuracy for finite element structural analysis via an integrated force method

NASA Technical Reports Server (NTRS)

Patnaik, S. N.; Hopkins, D. A.; Aiello, R. A.; Berke, L.

1992-01-01

A comparative study was carried out to determine the accuracy of finite element analyses based on the stiffness method, a mixed method, and the new integrated force and dual integrated force methods. The numerical results were obtained with the following software: MSC/NASTRAN and ASKA for the stiffness method; an MHOST implementation method for the mixed method; and GIFT for the integrated force methods. The results indicate that on an overall basis, the stiffness and mixed methods present some limitations. The stiffness method generally requires a large number of elements in the model to achieve acceptable accuracy. The MHOST method tends to achieve a higher degree of accuracy for course models than does the stiffness method implemented by MSC/NASTRAN and ASKA. The two integrated force methods, which bestow simultaneous emphasis on stress equilibrium and strain compatibility, yield accurate solutions with fewer elements in a model. The full potential of these new integrated force methods remains largely unexploited, and they hold the promise of spawning new finite element structural analysis tools.

Study of comparison between Ultra-high Frequency (UHF) method and ultrasonic method on PD detection for GIS

NASA Astrophysics Data System (ADS)

Li, Yanran; Chen, Duo; Li, Li; Zhang, Jiwei; Li, Guang; Liu, Hongxia

2017-11-01

GIS (gas insulated switchgear), is an important equipment in power system. Partial discharge plays an important role in detecting the insulation performance of GIS. UHF method and ultrasonic method frequently used in partial discharge (PD) detection for GIS. However, few studies have been conducted on comparison of this two methods. From the view point of safety, it is necessary to investigate UHF method and ultrasonic method for partial discharge in GIS. This paper presents study aimed at clarifying the effect of UHF method and ultrasonic method for partial discharge caused by free metal particles in GIS. Partial discharge tests were performed in laboratory simulated environment. Obtained results show the ability of anti-interference of signal detection and the accuracy of fault localization for UHF method and ultrasonic method. A new method based on UHF method and ultrasonic method of PD detection for GIS is proposed in order to greatly enhance the ability of anti-interference of signal detection and the accuracy of detection localization.

Comparison of four extraction/methylation analytical methods to measure fatty acid composition by gas chromatography in meat.

PubMed

Juárez, M; Polvillo, O; Contò, M; Ficco, A; Ballico, S; Failla, S

2008-05-09

Four different extraction-derivatization methods commonly used for fatty acid analysis in meat (in situ or one-step method, saponification method, classic method and a combination of classic extraction and saponification derivatization) were tested. The in situ method had low recovery and variation. The saponification method showed the best balance between recovery, precision, repeatability and reproducibility. The classic method had high recovery and acceptable variation values, except for the polyunsaturated fatty acids, showing higher variation than the former methods. The combination of extraction and methylation steps had great recovery values, but the precision, repeatability and reproducibility were not acceptable. Therefore the saponification method would be more convenient for polyunsaturated fatty acid analysis, whereas the in situ method would be an alternative for fast analysis. However the classic method would be the method of choice for the determination of the different lipid classes.

Birth Control Methods

MedlinePlus

... Z Health Topics Birth control methods Birth control methods > A-Z Health Topics Birth control methods fact ... To receive Publications email updates Submit Birth control methods Birth control (contraception) is any method, medicine, or ...

26 CFR 1.381(c)(5)-1 - Inventories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the dollar-value method, use the double-extension method, pool under the natural business unit method... double-extension method, pool under the natural business unit method, and value annual inventory... natural business unit method while P corporation pools under the multiple pool method. In addition, O...

26 CFR 1.381(c)(5)-1 - Inventories.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the dollar-value method, use the double-extension method, pool under the natural business unit method... double-extension method, pool under the natural business unit method, and value annual inventory... natural business unit method while P corporation pools under the multiple pool method. In addition, O...

46 CFR 160.076-11 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... following methods: (1) Method 5100, Strength and Elongation, Breaking of Woven Cloth; Grab Method, 160.076-25; (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method, 160.076-25; (3) Method 5134, Strength of Cloth, Tearing; Tongue Method, 160.076-25. Underwriters Laboratories (UL) Underwriters...

Costs and Efficiency of Online and Offline Recruitment Methods: A Web-Based Cohort Study

PubMed Central

Riis, Anders H; Hatch, Elizabeth E; Wise, Lauren A; Nielsen, Marie G; Rothman, Kenneth J; Toft Sørensen, Henrik; Mikkelsen, Ellen M

2017-01-01

Background The Internet is widely used to conduct research studies on health issues. Many different methods are used to recruit participants for such studies, but little is known about how various recruitment methods compare in terms of efficiency and costs. Objective The aim of our study was to compare online and offline recruitment methods for Internet-based studies in terms of efficiency (number of recruited participants) and costs per participant. Methods We employed several online and offline recruitment methods to enroll 18- to 45-year-old women in an Internet-based Danish prospective cohort study on fertility. Offline methods included press releases, posters, and flyers. Online methods comprised advertisements placed on five different websites, including Facebook and Netdoktor.dk. We defined seven categories of mutually exclusive recruitment methods and used electronic tracking via unique Uniform Resource Locator (URL) and self-reported data to identify the recruitment method for each participant. For each method, we calculated the average cost per participant and efficiency, that is, the total number of recruited participants. Results We recruited 8252 study participants. Of these, 534 were excluded as they could not be assigned to a specific recruitment method. The final study population included 7724 participants, of whom 803 (10.4%) were recruited by offline methods, 3985 (51.6%) by online methods, 2382 (30.8%) by online methods not initiated by us, and 554 (7.2%) by other methods. Overall, the average cost per participant was €6.22 for online methods initiated by us versus €9.06 for offline methods. Costs per participant ranged from €2.74 to €105.53 for online methods and from €0 to €67.50 for offline methods. Lowest average costs per participant were for those recruited from Netdoktor.dk (€2.99) and from Facebook (€3.44). Conclusions In our Internet-based cohort study, online recruitment methods were superior to offline methods in terms of efficiency (total number of participants enrolled). The average cost per recruited participant was also lower for online than for offline methods, although costs varied greatly among both online and offline recruitment methods. We observed a decrease in the efficiency of some online recruitment methods over time, suggesting that it may be optimal to adopt multiple online methods. PMID:28249833

Interior-Point Methods for Linear Programming: A Review

ERIC Educational Resources Information Center

Singh, J. N.; Singh, D.

2002-01-01

The paper reviews some recent advances in interior-point methods for linear programming and indicates directions in which future progress can be made. Most of the interior-point methods belong to any of three categories: affine-scaling methods, potential reduction methods and central path methods. These methods are discussed together with…

The Relation of Finite Element and Finite Difference Methods

NASA Technical Reports Server (NTRS)

Vinokur, M.

1976-01-01

Finite element and finite difference methods are examined in order to bring out their relationship. It is shown that both methods use two types of discrete representations of continuous functions. They differ in that finite difference methods emphasize the discretization of independent variable, while finite element methods emphasize the discretization of dependent variable (referred to as functional approximations). An important point is that finite element methods use global piecewise functional approximations, while finite difference methods normally use local functional approximations. A general conclusion is that finite element methods are best designed to handle complex boundaries, while finite difference methods are superior for complex equations. It is also shown that finite volume difference methods possess many of the advantages attributed to finite element methods.

[Baseflow separation methods in hydrological process research: a review].

PubMed

Xu, Lei-Lei; Liu, Jing-Lin; Jin, Chang-Jie; Wang, An-Zhi; Guan, De-Xin; Wu, Jia-Bing; Yuan, Feng-Hui

2011-11-01

Baseflow separation research is regarded as one of the most important and difficult issues in hydrology and ecohydrology, but lacked of unified standards in the concepts and methods. This paper introduced the theories of baseflow separation based on the definitions of baseflow components, and analyzed the development course of different baseflow separation methods. Among the methods developed, graph separation method is simple and applicable but arbitrary, balance method accords with hydrological mechanism but is difficult in application, whereas time series separation method and isotopic method can overcome the subjective and arbitrary defects caused by graph separation method, and thus can obtain the baseflow procedure quickly and efficiently. In recent years, hydrological modeling, digital filtering, and isotopic method are the main methods used for baseflow separation.

Semi top-down method combined with earth-bank, an effective method for basement construction.

NASA Astrophysics Data System (ADS)

Tuan, B. Q.; Tam, Ng M.

2018-04-01

Choosing an appropriate method of deep excavation not only plays a decisive role in technical success, but also in economics of the construction project. Presently, we mainly base on to key methods: “Bottom-up” and “Top-down” construction method. Right now, this paper presents an another method of construction that is “Semi Top-down method combining with earth-bank” in order to take the advantages and limit the weakness of the above methods. The Bottom-up method was improved by using the earth-bank to stabilize retaining walls instead of the bracing steel struts. The Top-down method was improved by using the open cut method for the half of the earthwork quantities.

Marker-based reconstruction of the kinematics of a chain of segments: a new method that incorporates joint kinematic constraints.

PubMed

Klous, Miriam; Klous, Sander

2010-07-01

The aim of skin-marker-based motion analysis is to reconstruct the motion of a kinematical model from noisy measured motion of skin markers. Existing kinematic models for reconstruction of chains of segments can be divided into two categories: analytical methods that do not take joint constraints into account and numerical global optimization methods that do take joint constraints into account but require numerical optimization of a large number of degrees of freedom, especially when the number of segments increases. In this study, a new and largely analytical method for a chain of rigid bodies is presented, interconnected in spherical joints (chain-method). In this method, the number of generalized coordinates to be determined through numerical optimization is three, irrespective of the number of segments. This new method is compared with the analytical method of Veldpaus et al. [1988, "A Least-Squares Algorithm for the Equiform Transformation From Spatial Marker Co-Ordinates," J. Biomech., 21, pp. 45-54] (Veldpaus-method, a method of the first category) and the numerical global optimization method of Lu and O'Connor [1999, "Bone Position Estimation From Skin-Marker Co-Ordinates Using Global Optimization With Joint Constraints," J. Biomech., 32, pp. 129-134] (Lu-method, a method of the second category) regarding the effects of continuous noise simulating skin movement artifacts and regarding systematic errors in joint constraints. The study is based on simulated data to allow a comparison of the results of the different algorithms with true (noise- and error-free) marker locations. Results indicate a clear trend that accuracy for the chain-method is higher than the Veldpaus-method and similar to the Lu-method. Because large parts of the equations in the chain-method can be solved analytically, the speed of convergence in this method is substantially higher than in the Lu-method. With only three segments, the average number of required iterations with the chain-method is 3.0+/-0.2 times lower than with the Lu-method when skin movement artifacts are simulated by applying a continuous noise model. When simulating systematic errors in joint constraints, the number of iterations for the chain-method was almost a factor 5 lower than the number of iterations for the Lu-method. However, the Lu-method performs slightly better than the chain-method. The RMSD value between the reconstructed and actual marker positions is approximately 57% of the systematic error on the joint center positions for the Lu-method compared with 59% for the chain-method.

Novel two wavelength spectrophotometric methods for simultaneous determination of binary mixtures with severely overlapping spectra

NASA Astrophysics Data System (ADS)

Lotfy, Hayam M.; Saleh, Sarah S.; Hassan, Nagiba Y.; Salem, Hesham

2015-02-01

This work presents the application of different spectrophotometric techniques based on two wavelengths for the determination of severely overlapped spectral components in a binary mixture without prior separation. Four novel spectrophotometric methods were developed namely: induced dual wavelength method (IDW), dual wavelength resolution technique (DWRT), advanced amplitude modulation method (AAM) and induced amplitude modulation method (IAM). The results of the novel methods were compared to that of three well-established methods which were: dual wavelength method (DW), Vierordt's method (VD) and bivariate method (BV). The developed methods were applied for the analysis of the binary mixture of hydrocortisone acetate (HCA) and fusidic acid (FSA) formulated as topical cream accompanied by the determination of methyl paraben and propyl paraben present as preservatives. The specificity of the novel methods was investigated by analyzing laboratory prepared mixtures and the combined dosage form. The methods were validated as per ICH guidelines where accuracy, repeatability, inter-day precision and robustness were found to be within the acceptable limits. The results obtained from the proposed methods were statistically compared with official ones where no significant difference was observed. No difference was observed between the obtained results when compared to the reported HPLC method, which proved that the developed methods could be alternative to HPLC techniques in quality control laboratories.

Determination of Slope Safety Factor with Analytical Solution and Searching Critical Slip Surface with Genetic-Traversal Random Method

PubMed Central

2014-01-01

In the current practice, to determine the safety factor of a slope with two-dimensional circular potential failure surface, one of the searching methods for the critical slip surface is Genetic Algorithm (GA), while the method to calculate the slope safety factor is Fellenius' slices method. However GA needs to be validated with more numeric tests, while Fellenius' slices method is just an approximate method like finite element method. This paper proposed a new method to determine the minimum slope safety factor which is the determination of slope safety factor with analytical solution and searching critical slip surface with Genetic-Traversal Random Method. The analytical solution is more accurate than Fellenius' slices method. The Genetic-Traversal Random Method uses random pick to utilize mutation. A computer automatic search program is developed for the Genetic-Traversal Random Method. After comparison with other methods like slope/w software, results indicate that the Genetic-Traversal Random Search Method can give very low safety factor which is about half of the other methods. However the obtained minimum safety factor with Genetic-Traversal Random Search Method is very close to the lower bound solutions of slope safety factor given by the Ansys software. PMID:24782679

Enumeration of total aerobic microorganisms in foods by SimPlate Total Plate Count-Color Indicator methods and conventional culture methods: collaborative study.

PubMed

Feldsine, Philip T; Leung, Stephanie C; Lienau, Andrew H; Mui, Linda A; Townsend, David E

2003-01-01

The relative efficacy of the SimPlate Total Plate Count-Color Indicator (TPC-CI) method (SimPlate 35 degrees C) was compared with the AOAC Official Method 966.23 (AOAC 35 degrees C) for enumeration of total aerobic microorganisms in foods. The SimPlate TPC-CI method, incubated at 30 degrees C (SimPlate 30 degrees C), was also compared with the International Organization for Standardization (ISO) 4833 method (ISO 30 degrees C). Six food types were analyzed: ground black pepper, flour, nut meats, frozen hamburger patties, frozen fruits, and fresh vegetables. All foods tested were naturally contaminated. Nineteen laboratories throughout North America and Europe participated in the study. Three method comparisons were conducted. In general, there was <0.3 mean log count difference in recovery among the SimPlate methods and their corresponding reference methods. Mean log counts between the 2 reference methods were also very similar. Repeatability (Sr) and reproducibility (SR) standard deviations were similar among the 3 method comparisons. The SimPlate method (35 degrees C) and the AOAC method were comparable for enumerating total aerobic microorganisms in foods. Similarly, the SimPlate method (30 degrees C) was comparable to the ISO method when samples were prepared and incubated according to the ISO method.

Computational time analysis of the numerical solution of 3D electrostatic Poisson's equation

NASA Astrophysics Data System (ADS)

Kamboh, Shakeel Ahmed; Labadin, Jane; Rigit, Andrew Ragai Henri; Ling, Tech Chaw; Amur, Khuda Bux; Chaudhary, Muhammad Tayyab

2015-05-01

3D Poisson's equation is solved numerically to simulate the electric potential in a prototype design of electrohydrodynamic (EHD) ion-drag micropump. Finite difference method (FDM) is employed to discretize the governing equation. The system of linear equations resulting from FDM is solved iteratively by using the sequential Jacobi (SJ) and sequential Gauss-Seidel (SGS) methods, simulation results are also compared to examine the difference between the results. The main objective was to analyze the computational time required by both the methods with respect to different grid sizes and parallelize the Jacobi method to reduce the computational time. In common, the SGS method is faster than the SJ method but the data parallelism of Jacobi method may produce good speedup over SGS method. In this study, the feasibility of using parallel Jacobi (PJ) method is attempted in relation to SGS method. MATLAB Parallel/Distributed computing environment is used and a parallel code for SJ method is implemented. It was found that for small grid size the SGS method remains dominant over SJ method and PJ method while for large grid size both the sequential methods may take nearly too much processing time to converge. Yet, the PJ method reduces computational time to some extent for large grid sizes.

Completed Suicide with Violent and Non-Violent Methods in Rural Shandong, China: A Psychological Autopsy Study

PubMed Central

Sun, Shi-Hua; Jia, Cun-Xian

2014-01-01

Background This study aims to describe the specific characteristics of completed suicides by violent methods and non-violent methods in rural Chinese population, and to explore the related factors for corresponding methods. Methods Data of this study came from investigation of 199 completed suicide cases and their paired controls of rural areas in three different counties in Shandong, China, by interviewing one informant of each subject using the method of Psychological Autopsy (PA). Results There were 78 (39.2%) suicides with violent methods and 121 (60.8%) suicides with non-violent methods. Ingesting pesticides, as a non-violent method, appeared to be the most common suicide method (103, 51.8%). Hanging (73 cases, 36.7%) and drowning (5 cases, 2.5%) were the only violent methods observed. Storage of pesticides at home and higher suicide intent score were significantly associated with choice of violent methods while committing suicide. Risk factors related to suicide death included negative life events and hopelessness. Conclusions Suicide with violent methods has different factors from suicide with non-violent methods. Suicide methods should be considered in suicide prevention and intervention strategies. PMID:25111835

A review of propeller noise prediction methodology: 1919-1994

NASA Technical Reports Server (NTRS)

Metzger, F. Bruce

1995-01-01

This report summarizes a review of the literature regarding propeller noise prediction methods. The review is divided into six sections: (1) early methods; (2) more recent methods based on earlier theory; (3) more recent methods based on the Acoustic Analogy; (4) more recent methods based on Computational Acoustics; (5) empirical methods; and (6) broadband methods. The report concludes that there are a large number of noise prediction procedures available which vary markedly in complexity. Deficiencies in accuracy of methods in many cases may be related, not to the methods themselves, but the accuracy and detail of the aerodynamic inputs used to calculate noise. The steps recommended in the report to provide accurate and easy to use prediction methods are: (1) identify reliable test data; (2) define and conduct test programs to fill gaps in the existing data base; (3) identify the most promising prediction methods; (4) evaluate promising prediction methods relative to the data base; (5) identify and correct the weaknesses in the prediction methods, including lack of user friendliness, and include features now available only in research codes; (6) confirm the accuracy of improved prediction methods to the data base; and (7) make the methods widely available and provide training in their use.

A different approach to estimate nonlinear regression model using numerical methods

NASA Astrophysics Data System (ADS)

Mahaboob, B.; Venkateswarlu, B.; Mokeshrayalu, G.; Balasiddamuni, P.

2017-11-01

This research paper concerns with the computational methods namely the Gauss-Newton method, Gradient algorithm methods (Newton-Raphson method, Steepest Descent or Steepest Ascent algorithm method, the Method of Scoring, the Method of Quadratic Hill-Climbing) based on numerical analysis to estimate parameters of nonlinear regression model in a very different way. Principles of matrix calculus have been used to discuss the Gradient-Algorithm methods. Yonathan Bard [1] discussed a comparison of gradient methods for the solution of nonlinear parameter estimation problems. However this article discusses an analytical approach to the gradient algorithm methods in a different way. This paper describes a new iterative technique namely Gauss-Newton method which differs from the iterative technique proposed by Gorden K. Smyth [2]. Hans Georg Bock et.al [10] proposed numerical methods for parameter estimation in DAE’s (Differential algebraic equation). Isabel Reis Dos Santos et al [11], Introduced weighted least squares procedure for estimating the unknown parameters of a nonlinear regression metamodel. For large-scale non smooth convex minimization the Hager and Zhang (HZ) conjugate gradient Method and the modified HZ (MHZ) method were presented by Gonglin Yuan et al [12].

Sorting protein decoys by machine-learning-to-rank

PubMed Central

Jing, Xiaoyang; Wang, Kai; Lu, Ruqian; Dong, Qiwen

2016-01-01

Much progress has been made in Protein structure prediction during the last few decades. As the predicted models can span a broad range of accuracy spectrum, the accuracy of quality estimation becomes one of the key elements of successful protein structure prediction. Over the past years, a number of methods have been developed to address this issue, and these methods could be roughly divided into three categories: the single-model methods, clustering-based methods and quasi single-model methods. In this study, we develop a single-model method MQAPRank based on the learning-to-rank algorithm firstly, and then implement a quasi single-model method Quasi-MQAPRank. The proposed methods are benchmarked on the 3DRobot and CASP11 dataset. The five-fold cross-validation on the 3DRobot dataset shows the proposed single model method outperforms other methods whose outputs are taken as features of the proposed method, and the quasi single-model method can further enhance the performance. On the CASP11 dataset, the proposed methods also perform well compared with other leading methods in corresponding categories. In particular, the Quasi-MQAPRank method achieves a considerable performance on the CASP11 Best150 dataset. PMID:27530967

Sorting protein decoys by machine-learning-to-rank.

PubMed

Jing, Xiaoyang; Wang, Kai; Lu, Ruqian; Dong, Qiwen

2016-08-17

Much progress has been made in Protein structure prediction during the last few decades. As the predicted models can span a broad range of accuracy spectrum, the accuracy of quality estimation becomes one of the key elements of successful protein structure prediction. Over the past years, a number of methods have been developed to address this issue, and these methods could be roughly divided into three categories: the single-model methods, clustering-based methods and quasi single-model methods. In this study, we develop a single-model method MQAPRank based on the learning-to-rank algorithm firstly, and then implement a quasi single-model method Quasi-MQAPRank. The proposed methods are benchmarked on the 3DRobot and CASP11 dataset. The five-fold cross-validation on the 3DRobot dataset shows the proposed single model method outperforms other methods whose outputs are taken as features of the proposed method, and the quasi single-model method can further enhance the performance. On the CASP11 dataset, the proposed methods also perform well compared with other leading methods in corresponding categories. In particular, the Quasi-MQAPRank method achieves a considerable performance on the CASP11 Best150 dataset.

Improved accuracy for finite element structural analysis via a new integrated force method

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Hopkins, Dale A.; Aiello, Robert A.; Berke, Laszlo

1992-01-01

A comparative study was carried out to determine the accuracy of finite element analyses based on the stiffness method, a mixed method, and the new integrated force and dual integrated force methods. The numerical results were obtained with the following software: MSC/NASTRAN and ASKA for the stiffness method; an MHOST implementation method for the mixed method; and GIFT for the integrated force methods. The results indicate that on an overall basis, the stiffness and mixed methods present some limitations. The stiffness method generally requires a large number of elements in the model to achieve acceptable accuracy. The MHOST method tends to achieve a higher degree of accuracy for course models than does the stiffness method implemented by MSC/NASTRAN and ASKA. The two integrated force methods, which bestow simultaneous emphasis on stress equilibrium and strain compatibility, yield accurate solutions with fewer elements in a model. The full potential of these new integrated force methods remains largely unexploited, and they hold the promise of spawning new finite element structural analysis tools.

Wideband characterization of the complex wave number and characteristic impedance of sound absorbers.

PubMed

Salissou, Yacoubou; Panneton, Raymond

2010-11-01

Several methods for measuring the complex wave number and the characteristic impedance of sound absorbers have been proposed in the literature. These methods can be classified into single frequency and wideband methods. In this paper, the main existing methods are revisited and discussed. An alternative method which is not well known or discussed in the literature while exhibiting great potential is also discussed. This method is essentially an improvement of the wideband method described by Iwase et al., rewritten so that the setup is more ISO 10534-2 standard-compliant. Glass wool, melamine foam and acoustical/thermal insulator wool are used to compare the main existing wideband non-iterative methods with this alternative method. It is found that, in the middle and high frequency ranges the alternative method yields results that are comparable in accuracy to the classical two-cavity method and the four-microphone transfer-matrix method. However, in the low frequency range, the alternative method appears to be more accurate than the other methods, especially when measuring the complex wave number.

Methods for environmental change; an exploratory study.

PubMed

Kok, Gerjo; Gottlieb, Nell H; Panne, Robert; Smerecnik, Chris

2012-11-28

While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change ('Bundling') and how within one environmental level, organizations, methods differ when directed at the management ('At') or applied by the management ('From'). The first part of this online survey dealt with examining the 'bundling' of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed 'at' an organization (for instance, by a health promoter) versus 'from' within an organization itself. All of the 20 respondents are experts in the field of health promotion. Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change.There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Taxonomies of theoretical change methods for environmental change should include combinations of individual level methods that may be bundled and separate suggestions for methods targeting a level or being targeted from a level. Future research needs to cover more methods to rate and to be rated. Qualitative data may explain some of the surprising outcomes, such as the lack of large differences and the avoidance of coercion. Taxonomies should include the theoretical parameters that limit the effectiveness of the method.

A comparison theorem for the SOR iterative method

NASA Astrophysics Data System (ADS)

Sun, Li-Ying

2005-09-01

In 1997, Kohno et al. have reported numerically that the improving modified Gauss-Seidel method, which was referred to as the IMGS method, is superior to the SOR iterative method. In this paper, we prove that the spectral radius of the IMGS method is smaller than that of the SOR method and Gauss-Seidel method, if the relaxation parameter [omega][set membership, variant](0,1]. As a result, we prove theoretically that this method is succeeded in improving the convergence of some classical iterative methods. Some recent results are improved.

A review of parametric approaches specific to aerodynamic design process

NASA Astrophysics Data System (ADS)

Zhang, Tian-tian; Wang, Zhen-guo; Huang, Wei; Yan, Li

2018-04-01

Parametric modeling of aircrafts plays a crucial role in the aerodynamic design process. Effective parametric approaches have large design space with a few variables. Parametric methods that commonly used nowadays are summarized in this paper, and their principles have been introduced briefly. Two-dimensional parametric methods include B-Spline method, Class/Shape function transformation method, Parametric Section method, Hicks-Henne method and Singular Value Decomposition method, and all of them have wide application in the design of the airfoil. This survey made a comparison among them to find out their abilities in the design of the airfoil, and the results show that the Singular Value Decomposition method has the best parametric accuracy. The development of three-dimensional parametric methods is limited, and the most popular one is the Free-form deformation method. Those methods extended from two-dimensional parametric methods have promising prospect in aircraft modeling. Since different parametric methods differ in their characteristics, real design process needs flexible choice among them to adapt to subsequent optimization procedure.

A Review and Comparison of Methods for Recreating Individual Patient Data from Published Kaplan-Meier Survival Curves for Economic Evaluations: A Simulation Study

PubMed Central

Wan, Xiaomin; Peng, Liubao; Li, Yuanjian

2015-01-01

Background In general, the individual patient-level data (IPD) collected in clinical trials are not available to independent researchers to conduct economic evaluations; researchers only have access to published survival curves and summary statistics. Thus, methods that use published survival curves and summary statistics to reproduce statistics for economic evaluations are essential. Four methods have been identified: two traditional methods 1) least squares method, 2) graphical method; and two recently proposed methods by 3) Hoyle and Henley, 4) Guyot et al. The four methods were first individually reviewed and subsequently assessed regarding their abilities to estimate mean survival through a simulation study. Methods A number of different scenarios were developed that comprised combinations of various sample sizes, censoring rates and parametric survival distributions. One thousand simulated survival datasets were generated for each scenario, and all methods were applied to actual IPD. The uncertainty in the estimate of mean survival time was also captured. Results All methods provided accurate estimates of the mean survival time when the sample size was 500 and a Weibull distribution was used. When the sample size was 100 and the Weibull distribution was used, the Guyot et al. method was almost as accurate as the Hoyle and Henley method; however, more biases were identified in the traditional methods. When a lognormal distribution was used, the Guyot et al. method generated noticeably less bias and a more accurate uncertainty compared with the Hoyle and Henley method. Conclusions The traditional methods should not be preferred because of their remarkable overestimation. When the Weibull distribution was used for a fitted model, the Guyot et al. method was almost as accurate as the Hoyle and Henley method. However, if the lognormal distribution was used, the Guyot et al. method was less biased compared with the Hoyle and Henley method. PMID:25803659

Comparisons of Lagrangian and Eulerian PDF methods in simulations of non-premixed turbulent jet flames with moderate-to-strong turbulence-chemistry interactions

NASA Astrophysics Data System (ADS)

Jaishree, J.; Haworth, D. C.

2012-06-01

Transported probability density function (PDF) methods have been applied widely and effectively for modelling turbulent reacting flows. In most applications of PDF methods to date, Lagrangian particle Monte Carlo algorithms have been used to solve a modelled PDF transport equation. However, Lagrangian particle PDF methods are computationally intensive and are not readily integrated into conventional Eulerian computational fluid dynamics (CFD) codes. Eulerian field PDF methods have been proposed as an alternative. Here a systematic comparison is performed among three methods for solving the same underlying modelled composition PDF transport equation: a consistent hybrid Lagrangian particle/Eulerian mesh (LPEM) method, a stochastic Eulerian field (SEF) method and a deterministic Eulerian field method with a direct-quadrature-method-of-moments closure (a multi-environment PDF-MEPDF method). The comparisons have been made in simulations of a series of three non-premixed, piloted methane-air turbulent jet flames that exhibit progressively increasing levels of local extinction and turbulence-chemistry interactions: Sandia/TUD flames D, E and F. The three PDF methods have been implemented using the same underlying CFD solver, and results obtained using the three methods have been compared using (to the extent possible) equivalent physical models and numerical parameters. Reasonably converged mean and rms scalar profiles are obtained using 40 particles per cell for the LPEM method or 40 Eulerian fields for the SEF method. Results from these stochastic methods are compared with results obtained using two- and three-environment MEPDF methods. The relative advantages and disadvantages of each method in terms of accuracy and computational requirements are explored and identified. In general, the results obtained from the two stochastic methods (LPEM and SEF) are very similar, and are in closer agreement with experimental measurements than those obtained using the MEPDF method, while MEPDF is the most computationally efficient of the three methods. These and other findings are discussed in detail.

AN EULERIAN-LAGRANGIAN LOCALIZED ADJOINT METHOD FOR THE ADVECTION-DIFFUSION EQUATION

EPA Science Inventory

Many numerical methods use characteristic analysis to accommodate the advective component of transport. Such characteristic methods include Eulerian-Lagrangian methods (ELM), modified method of characteristics (MMOC), and operator splitting methods. A generalization of characteri...

Capital investment analysis: three methods.

PubMed

Gapenski, L C

1993-08-01

Three cash flow/discount rate methods can be used when conducting capital budgeting financial analyses: the net operating cash flow method, the net cash flow to investors method, and the net cash flow to equity holders method. The three methods differ in how the financing mix and the benefits of debt financing are incorporated. This article explains the three methods, demonstrates that they are essentially equivalent, and recommends which method to use under specific circumstances.

Effective description of a 3D object for photon transportation in Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Suganuma, R.; Ogawa, K.

2000-06-01

Photon transport simulation by means of the Monte Carlo method is an indispensable technique for examining scatter and absorption correction methods in SPECT and PET. The authors have developed a method for object description with maximum size regions (maximum rectangular regions: MRRs) to speed up photon transport simulation, and compared the computation time with that for conventional object description methods, a voxel-based (VB) method and an octree method, in the simulations of two kinds of phantoms. The simulation results showed that the computation time with the proposed method became about 50% of that with the VD method and about 70% of that with the octree method for a high resolution MCAT phantom. Here, details of the expansion of the MRR method to three dimensions are given. Moreover, the effectiveness of the proposed method was compared with the VB and octree methods.

Region of influence regression for estimating the 50-year flood at ungaged sites

USGS Publications Warehouse

Tasker, Gary D.; Hodge, S.A.; Barks, C.S.

1996-01-01

Five methods of developing regional regression models to estimate flood characteristics at ungaged sites in Arkansas are examined. The methods differ in the manner in which the State is divided into subrogions. Each successive method (A to E) is computationally more complex than the previous method. Method A makes no subdivision. Methods B and C define two and four geographic subrogions, respectively. Method D uses cluster/discriminant analysis to define subrogions on the basis of similarities in watershed characteristics. Method E, the new region of influence method, defines a unique subregion for each ungaged site. Split-sample results indicate that, in terms of root-mean-square error, method E (38 percent error) is best. Methods C and D (42 and 41 percent error) were in a virtual tie for second, and methods B (44 percent error) and A (49 percent error) were fourth and fifth best.

Scalable parallel elastic-plastic finite element analysis using a quasi-Newton method with a balancing domain decomposition preconditioner

NASA Astrophysics Data System (ADS)

Yusa, Yasunori; Okada, Hiroshi; Yamada, Tomonori; Yoshimura, Shinobu

2018-04-01

A domain decomposition method for large-scale elastic-plastic problems is proposed. The proposed method is based on a quasi-Newton method in conjunction with a balancing domain decomposition preconditioner. The use of a quasi-Newton method overcomes two problems associated with the conventional domain decomposition method based on the Newton-Raphson method: (1) avoidance of a double-loop iteration algorithm, which generally has large computational complexity, and (2) consideration of the local concentration of nonlinear deformation, which is observed in elastic-plastic problems with stress concentration. Moreover, the application of a balancing domain decomposition preconditioner ensures scalability. Using the conventional and proposed domain decomposition methods, several numerical tests, including weak scaling tests, were performed. The convergence performance of the proposed method is comparable to that of the conventional method. In particular, in elastic-plastic analysis, the proposed method exhibits better convergence performance than the conventional method.

Designing Class Methods from Dataflow Diagrams

NASA Astrophysics Data System (ADS)

Shoval, Peretz; Kabeli-Shani, Judith

A method for designing the class methods of an information system is described. The method is part of FOOM - Functional and Object-Oriented Methodology. In the analysis phase of FOOM, two models defining the users' requirements are created: a conceptual data model - an initial class diagram; and a functional model - hierarchical OO-DFDs (object-oriented dataflow diagrams). Based on these models, a well-defined process of methods design is applied. First, the OO-DFDs are converted into transactions, i.e., system processes that supports user task. The components and the process logic of each transaction are described in detail, using pseudocode. Then, each transaction is decomposed, according to well-defined rules, into class methods of various types: basic methods, application-specific methods and main transaction (control) methods. Each method is attached to a proper class; messages between methods express the process logic of each transaction. The methods are defined using pseudocode or message charts.

Simple Test Functions in Meshless Local Petrov-Galerkin Methods

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.

2016-01-01

Two meshless local Petrov-Galerkin (MLPG) methods based on two different trial functions but that use a simple linear test function were developed for beam and column problems. These methods used generalized moving least squares (GMLS) and radial basis (RB) interpolation functions as trial functions. These two methods were tested on various patch test problems. Both methods passed the patch tests successfully. Then the methods were applied to various beam vibration problems and problems involving Euler and Beck's columns. Both methods yielded accurate solutions for all problems studied. The simple linear test function offers considerable savings in computing efforts as the domain integrals involved in the weak form are avoided. The two methods based on this simple linear test function method produced accurate results for frequencies and buckling loads. Of the two methods studied, the method with radial basis trial functions is very attractive as the method is simple, accurate, and robust.

Leapfrog variants of iterative methods for linear algebra equations

NASA Technical Reports Server (NTRS)

Saylor, Paul E.

1988-01-01

Two iterative methods are considered, Richardson's method and a general second order method. For both methods, a variant of the method is derived for which only even numbered iterates are computed. The variant is called a leapfrog method. Comparisons between the conventional form of the methods and the leapfrog form are made under the assumption that the number of unknowns is large. In the case of Richardson's method, it is possible to express the final iterate in terms of only the initial approximation, a variant of the iteration called the grand-leap method. In the case of the grand-leap variant, a set of parameters is required. An algorithm is presented to compute these parameters that is related to algorithms to compute the weights and abscissas for Gaussian quadrature. General algorithms to implement the leapfrog and grand-leap methods are presented. Algorithms for the important special case of the Chebyshev method are also given.

Development of a Coordinate Transformation method for direct georeferencing in map projection frames

NASA Astrophysics Data System (ADS)

Zhao, Haitao; Zhang, Bing; Wu, Changshan; Zuo, Zhengli; Chen, Zhengchao

2013-03-01

This paper develops a novel Coordinate Transformation method (CT-method), with which the orientation angles (roll, pitch, heading) of the local tangent frame of the GPS/INS system are transformed into those (omega, phi, kappa) of the map projection frame for direct georeferencing (DG). Especially, the orientation angles in the map projection frame were derived from a sequence of coordinate transformations. The effectiveness of orientation angles transformation was verified through comparing with DG results obtained from conventional methods (Legat method and POSPac method) using empirical data. Moreover, the CT-method was also validated with simulated data. One advantage of the proposed method is that the orientation angles can be acquired simultaneously while calculating position elements of exterior orientation (EO) parameters and auxiliary points coordinates by coordinate transformation. These three methods were demonstrated and compared using empirical data. Empirical results show that the CT-method is both as sound and effective as Legat method. Compared with POSPac method, the CT-method is more suitable for calculating EO parameters for DG in map projection frames. DG accuracy of the CT-method and Legat method are at the same level. DG results of all these three methods have systematic errors in height due to inconsistent length projection distortion in the vertical and horizontal components, and these errors can be significantly reduced using the EO height correction technique in Legat's approach. Similar to the results obtained with empirical data, the effectiveness of the CT-method was also proved with simulated data. POSPac method: The method is presented by Applanix POSPac software technical note (Hutton and Savina, 1997). It is implemented in the POSEO module of POSPac software.

Comparison of four USEPA digestion methods for trace metal analysis using certified and Florida soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, M.; Ma, L.Q.

1998-11-01

It is critical to compare existing sample digestion methods for evaluating soil contamination and remediation. USEPA Methods 3050, 3051, 3051a, and 3052 were used to digest standard reference materials and representative Florida surface soils. Fifteen trace metals (Ag, As, Ba, Be, Cd, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Se, and Za), and six macro elements (Al, Ca, Fe, K, Mg, and P) were analyzed. Precise analysis was achieved for all elements except for Cd, Mo, Se, and Sb in NIST SRMs 2704 and 2709 by USEPA Methods 3050 and 3051, and for all elements except for As, Mo,more » Sb, and Se in NIST SRM 2711 by USEPA Method 3052. No significant differences were observed for the three NIST SRMs between the microwave-assisted USEPA Methods 3051 and 3051A and the conventional USEPA Method 3050 Methods 3051 and 3051a and the conventional USEPA Method 3050 except for Hg, Sb, and Se. USEPA Method 3051a provided comparable values for NIST SRMs certified using USEPA Method 3050. However, for method correlation coefficients and elemental recoveries in 40 Florida surface soils, USEPA Method 3051a was an overall better alternative for Method 3050 than was Method 3051. Among the four digestion methods, the microwave-assisted USEPA Method 3052 achieved satisfactory recoveries for all elements except As and Mg using NIST SRM 2711. This total-total digestion method provided greater recoveries for 12 elements Ag, Be, Cr, Fe, K, Mn, Mo, Ni, Pb, Sb, Se, and Zn, but lower recoveries for Mg in Florida soils than did the total-recoverable digestion methods.« less

[Comparative analysis between diatom nitric acid digestion method and plankton 16S rDNA PCR method].

PubMed

Han, Jun-ge; Wang, Cheng-bao; Li, Xing-biao; Fan, Yan-yan; Feng, Xiang-ping

2013-10-01

To compare and explore the application value of diatom nitric acid digestion method and plankton 16S rDNA PCR method for drowning identification. Forty drowning cases from 2010 to 2011 were collected from Department of Forensic Medicine of Wenzhou Medical University. Samples including lung, kidney, liver and field water from each case were tested with diatom nitric acid digestion method and plankton 16S rDNA PCR method, respectively. The Diatom nitric acid digestion method and plankton 16S rDNA PCR method required 20 g and 2 g of each organ, and 15 mL and 1.5 mL of field water, respectively. The inspection time and detection rate were compared between the two methods. Diatom nitric acid digestion method mainly detected two species of diatoms, Centriae and Pennatae, while plankton 16S rDNA PCR method amplified a length of 162 bp band. The average inspection time of each case of the Diatom nitric acid digestion method was (95.30 +/- 2.78) min less than (325.33 +/- 14.18) min of plankton 16S rDNA PCR method (P < 0.05). The detection rates of two methods for field water and lung were both 100%. For liver and kidney, the detection rate of plankton 16S rDNA PCR method was both 80%, higher than 40% and 30% of diatom nitric acid digestion method (P < 0.05), respectively. The laboratory testing method needs to be appropriately selected according to the specific circumstances in the forensic appraisal of drowning. Compared with diatom nitric acid digestion method, plankton 16S rDNA PCR method has practice values with such advantages as less quantity of samples, huge information and high specificity.

Reliable clarity automatic-evaluation method for optical remote sensing images

NASA Astrophysics Data System (ADS)

Qin, Bangyong; Shang, Ren; Li, Shengyang; Hei, Baoqin; Liu, Zhiwen

2015-10-01

Image clarity, which reflects the sharpness degree at the edge of objects in images, is an important quality evaluate index for optical remote sensing images. Scholars at home and abroad have done a lot of work on estimation of image clarity. At present, common clarity-estimation methods for digital images mainly include frequency-domain function methods, statistical parametric methods, gradient function methods and edge acutance methods. Frequency-domain function method is an accurate clarity-measure approach. However, its calculation process is complicate and cannot be carried out automatically. Statistical parametric methods and gradient function methods are both sensitive to clarity of images, while their results are easy to be affected by the complex degree of images. Edge acutance method is an effective approach for clarity estimate, while it needs picking out the edges manually. Due to the limits in accuracy, consistent or automation, these existing methods are not applicable to quality evaluation of optical remote sensing images. In this article, a new clarity-evaluation method, which is based on the principle of edge acutance algorithm, is proposed. In the new method, edge detection algorithm and gradient search algorithm are adopted to automatically search the object edges in images. Moreover, The calculation algorithm for edge sharpness has been improved. The new method has been tested with several groups of optical remote sensing images. Compared with the existing automatic evaluation methods, the new method perform better both in accuracy and consistency. Thus, the new method is an effective clarity evaluation method for optical remote sensing images.

26 CFR 1.412(c)(1)-2 - Shortfall method.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 5 2013-04-01 2013-04-01 false Shortfall method. 1.412(c)(1)-2 Section 1.412(c... Shortfall method. (a) In general—(1) Shortfall method. The shortfall method is a funding method that adapts a plan's underlying funding method for purposes of section 412. As such, the use of the shortfall...

26 CFR 1.412(c)(1)-2 - Shortfall method.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 5 2012-04-01 2011-04-01 true Shortfall method. 1.412(c)(1)-2 Section 1.412(c... Shortfall method. (a) In general—(1) Shortfall method. The shortfall method is a funding method that adapts a plan's underlying funding method for purposes of section 412. As such, the use of the shortfall...

26 CFR 1.412(c)(1)-2 - Shortfall method.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 5 2014-04-01 2014-04-01 false Shortfall method. 1.412(c)(1)-2 Section 1.412(c... Shortfall method. (a) In general—(1) Shortfall method. The shortfall method is a funding method that adapts a plan's underlying funding method for purposes of section 412. As such, the use of the shortfall...

26 CFR 1.412(c)(1)-2 - Shortfall method.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 5 2011-04-01 2011-04-01 false Shortfall method. 1.412(c)(1)-2 Section 1.412(c... Shortfall method. (a) In general—(1) Shortfall method. The shortfall method is a funding method that adapts a plan's underlying funding method for purposes of section 412. As such, the use of the shortfall...

40 CFR 60.547 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... materials. In the event of dispute, Method 24 shall be the reference method. For Method 24, the cement or... sample will be representative of the material as applied in the affected facility. (2) Method 25 as the... by the Administrator. (3) Method 2, 2A, 2C, or 2D, as appropriate, as the reference method for...

40 CFR 60.547 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... materials. In the event of dispute, Method 24 shall be the reference method. For Method 24, the cement or... sample will be representative of the material as applied in the affected facility. (2) Method 25 as the... by the Administrator. (3) Method 2, 2A, 2C, or 2D, as appropriate, as the reference method for...

40 CFR 60.547 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... materials. In the event of dispute, Method 24 shall be the reference method. For Method 24, the cement or... sample will be representative of the material as applied in the affected facility. (2) Method 25 as the... by the Administrator. (3) Method 2, 2A, 2C, or 2D, as appropriate, as the reference method for...

The Dramatic Methods of Hans van Dam.

ERIC Educational Resources Information Center

van de Water, Manon

1994-01-01

Interprets for the American reader the untranslated dramatic methods of Hans van Dam, a leading drama theorist in the Netherlands. Discusses the functions of drama as a method, closed dramatic methods, open dramatic methods, and applying van Dam's methods. (SR)

Methods for environmental change; an exploratory study

PubMed Central

2012-01-01

Background While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change (‘Bundling’) and how within one environmental level, organizations, methods differ when directed at the management (‘At’) or applied by the management (‘From’). Methods The first part of this online survey dealt with examining the ‘bundling’ of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed ‘at’ an organization (for instance, by a health promoter) versus ‘from’ within an organization itself. All of the 20 respondents are experts in the field of health promotion. Results Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change. There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Conclusions Taxonomies of theoretical change methods for environmental change should include combinations of individual level methods that may be bundled and separate suggestions for methods targeting a level or being targeted from a level. Future research needs to cover more methods to rate and to be rated. Qualitative data may explain some of the surprising outcomes, such as the lack of large differences and the avoidance of coercion. Taxonomies should include the theoretical parameters that limit the effectiveness of the method. PMID:23190712

Implementation of an improved adaptive-implicit method in a thermal compositional simulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, T.B.

1988-11-01

A multicomponent thermal simulator with an adaptive-implicit-method (AIM) formulation/inexact-adaptive-Newton (IAN) method is presented. The final coefficient matrix retains the original banded structure so that conventional iterative methods can be used. Various methods for selection of the eliminated unknowns are tested. AIM/IAN method has a lower work count per Newtonian iteration than fully implicit methods, but a wrong choice of unknowns will result in excessive Newtonian iterations. For the problems tested, the residual-error method described in the paper for selecting implicit unknowns, together with the IAN method, had an improvement of up to 28% of the CPU time over the fullymore » implicit method.« less

Approaches to Mixed Methods Dissemination and Implementation Research: Methods, Strengths, Caveats, and Opportunities.

PubMed

Green, Carla A; Duan, Naihua; Gibbons, Robert D; Hoagwood, Kimberly E; Palinkas, Lawrence A; Wisdom, Jennifer P

2015-09-01

Limited translation of research into practice has prompted study of diffusion and implementation, and development of effective methods of encouraging adoption, dissemination and implementation. Mixed methods techniques offer approaches for assessing and addressing processes affecting implementation of evidence-based interventions. We describe common mixed methods approaches used in dissemination and implementation research, discuss strengths and limitations of mixed methods approaches to data collection, and suggest promising methods not yet widely used in implementation research. We review qualitative, quantitative, and hybrid approaches to mixed methods dissemination and implementation studies, and describe methods for integrating multiple methods to increase depth of understanding while improving reliability and validity of findings.

Approaches to Mixed Methods Dissemination and Implementation Research: Methods, Strengths, Caveats, and Opportunities

PubMed Central

Green, Carla A.; Duan, Naihua; Gibbons, Robert D.; Hoagwood, Kimberly E.; Palinkas, Lawrence A.; Wisdom, Jennifer P.

2015-01-01

Limited translation of research into practice has prompted study of diffusion and implementation, and development of effective methods of encouraging adoption, dissemination and implementation. Mixed methods techniques offer approaches for assessing and addressing processes affecting implementation of evidence-based interventions. We describe common mixed methods approaches used in dissemination and implementation research, discuss strengths and limitations of mixed methods approaches to data collection, and suggest promising methods not yet widely used in implementation research. We review qualitative, quantitative, and hybrid approaches to mixed methods dissemination and implementation studies, and describe methods for integrating multiple methods to increase depth of understanding while improving reliability and validity of findings. PMID:24722814

Bond additivity corrections for quantum chemistry methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

C. F. Melius; M. D. Allendorf

1999-04-01

In the 1980's, the authors developed a bond-additivity correction procedure for quantum chemical calculations called BAC-MP4, which has proven reliable in calculating the thermochemical properties of molecular species, including radicals as well as stable closed-shell species. New Bond Additivity Correction (BAC) methods have been developed for the G2 method, BAC-G2, as well as for a hybrid DFT/MP2 method, BAC-Hybrid. These BAC methods use a new form of BAC corrections, involving atomic, molecular, and bond-wise additive terms. These terms enable one to treat positive and negative ions as well as neutrals. The BAC-G2 method reduces errors in the G2 method duemore » to nearest-neighbor bonds. The parameters within the BAC-G2 method only depend on atom types. Thus the BAC-G2 method can be used to determine the parameters needed by BAC methods involving lower levels of theory, such as BAC-Hybrid and BAC-MP4. The BAC-Hybrid method should scale well for large molecules. The BAC-Hybrid method uses the differences between the DFT and MP2 as an indicator of the method's accuracy, while the BAC-G2 method uses its internal methods (G1 and G2MP2) to provide an indicator of its accuracy. Indications of the average error as well as worst cases are provided for each of the BAC methods.« less

Comparison of different methods to quantify fat classes in bakery products.

PubMed

Shin, Jae-Min; Hwang, Young-Ok; Tu, Ock-Ju; Jo, Han-Bin; Kim, Jung-Hun; Chae, Young-Zoo; Rhu, Kyung-Hun; Park, Seung-Kook

2013-01-15

The definition of fat differs in different countries; thus whether fat is listed on food labels depends on the country. Some countries list crude fat content in the 'Fat' section on the food label, whereas other countries list total fat. In this study, three methods were used for determining fat classes and content in bakery products: the Folch method, the automated Soxhlet method, and the AOAC 996.06 method. The results using these methods were compared. Fat (crude) extracted by the Folch and Soxhlet methods was gravimetrically determined and assessed by fat class using capillary gas chromatography (GC). In most samples, fat (total) content determined by the AOAC 996.06 method was lower than the fat (crude) content determined by the Folch or automated Soxhlet methods. Furthermore, monounsaturated fat or saturated fat content determined by the AOAC 996.06 method was lowest. Almost no difference was observed between fat (crude) content determined by the Folch method and that determined by the automated Soxhlet method for nearly all samples. In three samples (wheat biscuits, butter cookies-1, and chocolate chip cookies), monounsaturated fat, saturated fat, and trans fat content obtained by the automated Soxhlet method was higher than that obtained by the Folch method. The polyunsaturated fat content obtained by the automated Soxhlet method was not higher than that obtained by the Folch method in any sample. Copyright © 2012 Elsevier Ltd. All rights reserved.

A CLASS OF RECONSTRUCTED DISCONTINUOUS GALERKIN METHODS IN COMPUTATIONAL FLUID DYNAMICS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong Luo; Yidong Xia; Robert Nourgaliev

2011-05-01

A class of reconstructed discontinuous Galerkin (DG) methods is presented to solve compressible flow problems on arbitrary grids. The idea is to combine the efficiency of the reconstruction methods in finite volume methods and the accuracy of the DG methods to obtain a better numerical algorithm in computational fluid dynamics. The beauty of the resulting reconstructed discontinuous Galerkin (RDG) methods is that they provide a unified formulation for both finite volume and DG methods, and contain both classical finite volume and standard DG methods as two special cases of the RDG methods, and thus allow for a direct efficiency comparison.more » Both Green-Gauss and least-squares reconstruction methods and a least-squares recovery method are presented to obtain a quadratic polynomial representation of the underlying linear discontinuous Galerkin solution on each cell via a so-called in-cell reconstruction process. The devised in-cell reconstruction is aimed to augment the accuracy of the discontinuous Galerkin method by increasing the order of the underlying polynomial solution. These three reconstructed discontinuous Galerkin methods are used to compute a variety of compressible flow problems on arbitrary meshes to assess their accuracy. The numerical experiments demonstrate that all three reconstructed discontinuous Galerkin methods can significantly improve the accuracy of the underlying second-order DG method, although the least-squares reconstructed DG method provides the best performance in terms of both accuracy, efficiency, and robustness.« less

Optimal back-extrapolation method for estimating plasma volume in humans using the indocyanine green dilution method

PubMed Central

2014-01-01

Background The indocyanine green dilution method is one of the methods available to estimate plasma volume, although some researchers have questioned the accuracy of this method. Methods We developed a new, physiologically based mathematical model of indocyanine green kinetics that more accurately represents indocyanine green kinetics during the first few minutes postinjection than what is assumed when using the traditional mono-exponential back-extrapolation method. The mathematical model is used to develop an optimal back-extrapolation method for estimating plasma volume based on simulated indocyanine green kinetics obtained from the physiological model. Results Results from a clinical study using the indocyanine green dilution method in 36 subjects with type 2 diabetes indicate that the estimated plasma volumes are considerably lower when using the traditional back-extrapolation method than when using the proposed back-extrapolation method (mean (standard deviation) plasma volume = 26.8 (5.4) mL/kg for the traditional method vs 35.1 (7.0) mL/kg for the proposed method). The results obtained using the proposed method are more consistent with previously reported plasma volume values. Conclusions Based on the more physiological representation of indocyanine green kinetics and greater consistency with previously reported plasma volume values, the new back-extrapolation method is proposed for use when estimating plasma volume using the indocyanine green dilution method. PMID:25052018

Integral methods of solving boundary-value problems of nonstationary heat conduction and their comparative analysis

NASA Astrophysics Data System (ADS)

Kot, V. A.

2017-11-01

The modern state of approximate integral methods used in applications, where the processes of heat conduction and heat and mass transfer are of first importance, is considered. Integral methods have found a wide utility in different fields of knowledge: problems of heat conduction with different heat-exchange conditions, simulation of thermal protection, Stefantype problems, microwave heating of a substance, problems on a boundary layer, simulation of a fluid flow in a channel, thermal explosion, laser and plasma treatment of materials, simulation of the formation and melting of ice, inverse heat problems, temperature and thermal definition of nanoparticles and nanoliquids, and others. Moreover, polynomial solutions are of interest because the determination of a temperature (concentration) field is an intermediate stage in the mathematical description of any other process. The following main methods were investigated on the basis of the error norms: the Tsoi and Postol’nik methods, the method of integral relations, the Gudman integral method of heat balance, the improved Volkov integral method, the matched integral method, the modified Hristov method, the Mayer integral method, the Kudinov method of additional boundary conditions, the Fedorov boundary method, the method of weighted temperature function, the integral method of boundary characteristics. It was established that the two last-mentioned methods are characterized by high convergence and frequently give solutions whose accuracy is not worse that the accuracy of numerical solutions.

Method for producing smooth inner surfaces

DOEpatents

Cooper, Charles A.

2016-05-17

The invention provides a method for preparing superconducting cavities, the method comprising causing polishing media to tumble by centrifugal barrel polishing within the cavities for a time sufficient to attain a surface smoothness of less than 15 nm root mean square roughness over approximately a 1 mm.sup.2 scan area. The method also provides for a method for preparing superconducting cavities, the method comprising causing polishing media bound to a carrier to tumble within the cavities. The method also provides for a method for preparing superconducting cavities, the method comprising causing polishing media in a slurry to tumble within the cavities.

A Hybrid Method for Pancreas Extraction from CT Image Based on Level Set Methods

PubMed Central

Tan, Hanqing; Fujita, Hiroshi

2013-01-01

This paper proposes a novel semiautomatic method to extract the pancreas from abdominal CT images. Traditional level set and region growing methods that request locating initial contour near the final boundary of object have problem of leakage to nearby tissues of pancreas region. The proposed method consists of a customized fast-marching level set method which generates an optimal initial pancreas region to solve the problem that the level set method is sensitive to the initial contour location and a modified distance regularized level set method which extracts accurate pancreas. The novelty in our method is the proper selection and combination of level set methods, furthermore an energy-decrement algorithm and an energy-tune algorithm are proposed to reduce the negative impact of bonding force caused by connected tissue whose intensity is similar with pancreas. As a result, our method overcomes the shortages of oversegmentation at weak boundary and can accurately extract pancreas from CT images. The proposed method is compared to other five state-of-the-art medical image segmentation methods based on a CT image dataset which contains abdominal images from 10 patients. The evaluated results demonstrate that our method outperforms other methods by achieving higher accuracy and making less false segmentation in pancreas extraction. PMID:24066016

Optimal back-extrapolation method for estimating plasma volume in humans using the indocyanine green dilution method.

PubMed

Polidori, David; Rowley, Clarence

2014-07-22

The indocyanine green dilution method is one of the methods available to estimate plasma volume, although some researchers have questioned the accuracy of this method. We developed a new, physiologically based mathematical model of indocyanine green kinetics that more accurately represents indocyanine green kinetics during the first few minutes postinjection than what is assumed when using the traditional mono-exponential back-extrapolation method. The mathematical model is used to develop an optimal back-extrapolation method for estimating plasma volume based on simulated indocyanine green kinetics obtained from the physiological model. Results from a clinical study using the indocyanine green dilution method in 36 subjects with type 2 diabetes indicate that the estimated plasma volumes are considerably lower when using the traditional back-extrapolation method than when using the proposed back-extrapolation method (mean (standard deviation) plasma volume = 26.8 (5.4) mL/kg for the traditional method vs 35.1 (7.0) mL/kg for the proposed method). The results obtained using the proposed method are more consistent with previously reported plasma volume values. Based on the more physiological representation of indocyanine green kinetics and greater consistency with previously reported plasma volume values, the new back-extrapolation method is proposed for use when estimating plasma volume using the indocyanine green dilution method.

Trends in the Contraceptive Method Mix in Low- and Middle-Income Countries: Analysis Using a New “Average Deviation” Measure

PubMed Central

Ross, John; Keesbury, Jill; Hardee, Karen

2015-01-01

ABSTRACT The method mix of contraceptive use is severely unbalanced in many countries, with over half of all use provided by just 1 or 2 methods. That tends to limit the range of user options and constrains the total prevalence of use, leading to unplanned pregnancies and births or abortions. Previous analyses of method mix distortions focused on countries where a single method accounted for more than half of all use (the 50% rule). We introduce a new measure that uses the average deviation (AD) of method shares around their own mean and apply that to a secondary analysis of method mix data for 8 contraceptive methods from 666 national surveys in 123 countries. A high AD value indicates a skewed method mix while a low AD value indicates a more uniform pattern across methods; the values can range from 0 to 21.9. Most AD values ranged from 6 to 19, with an interquartile range of 8.6 to 12.2. Using the AD measure, we identified 15 countries where the method mix has evolved from a distorted one to a better balanced one, with AD values declining, on average, by 35% over time. Countries show disparate paths in method gains and losses toward a balanced mix, but 4 patterns are suggested: (1) rise of one method partially offset by changes in other methods, (2) replacement of traditional with modern methods, (3) continued but declining domination by a single method, and (4) declines in dominant methods with increases in other methods toward a balanced mix. Regions differ markedly in their method mix profiles and preferences, raising the question of whether programmatic resources are best devoted to better provision of the well-accepted methods or to deploying neglected or new ones, or to a combination of both approaches. PMID:25745119

A review and comparison of methods for recreating individual patient data from published Kaplan-Meier survival curves for economic evaluations: a simulation study.

PubMed

Wan, Xiaomin; Peng, Liubao; Li, Yuanjian

2015-01-01

In general, the individual patient-level data (IPD) collected in clinical trials are not available to independent researchers to conduct economic evaluations; researchers only have access to published survival curves and summary statistics. Thus, methods that use published survival curves and summary statistics to reproduce statistics for economic evaluations are essential. Four methods have been identified: two traditional methods 1) least squares method, 2) graphical method; and two recently proposed methods by 3) Hoyle and Henley, 4) Guyot et al. The four methods were first individually reviewed and subsequently assessed regarding their abilities to estimate mean survival through a simulation study. A number of different scenarios were developed that comprised combinations of various sample sizes, censoring rates and parametric survival distributions. One thousand simulated survival datasets were generated for each scenario, and all methods were applied to actual IPD. The uncertainty in the estimate of mean survival time was also captured. All methods provided accurate estimates of the mean survival time when the sample size was 500 and a Weibull distribution was used. When the sample size was 100 and the Weibull distribution was used, the Guyot et al. method was almost as accurate as the Hoyle and Henley method; however, more biases were identified in the traditional methods. When a lognormal distribution was used, the Guyot et al. method generated noticeably less bias and a more accurate uncertainty compared with the Hoyle and Henley method. The traditional methods should not be preferred because of their remarkable overestimation. When the Weibull distribution was used for a fitted model, the Guyot et al. method was almost as accurate as the Hoyle and Henley method. However, if the lognormal distribution was used, the Guyot et al. method was less biased compared with the Hoyle and Henley method.

Achieving cost-neutrality with long-acting reversible contraceptive methods.

PubMed

Trussell, James; Hassan, Fareen; Lowin, Julia; Law, Amy; Filonenko, Anna

2015-01-01

This analysis aimed to estimate the average annual cost of available reversible contraceptive methods in the United States. In line with literature suggesting long-acting reversible contraceptive (LARC) methods become increasingly cost-saving with extended duration of use, it aimed to also quantify minimum duration of use required for LARC methods to achieve cost-neutrality relative to other reversible contraceptive methods while taking into consideration discontinuation. A three-state economic model was developed to estimate relative costs of no method (chance), four short-acting reversible (SARC) methods (oral contraceptive, ring, patch and injection) and three LARC methods [implant, copper intrauterine device (IUD) and levonorgestrel intrauterine system (LNG-IUS) 20 mcg/24 h (total content 52 mg)]. The analysis was conducted over a 5-year time horizon in 1000 women aged 20-29 years. Method-specific failure and discontinuation rates were based on published literature. Costs associated with drug acquisition, administration and failure (defined as an unintended pregnancy) were considered. Key model outputs were annual average cost per method and minimum duration of LARC method usage to achieve cost-savings compared to SARC methods. The two least expensive methods were copper IUD ($304 per women, per year) and LNG-IUS 20 mcg/24 h ($308). Cost of SARC methods ranged between $432 (injection) and $730 (patch), per women, per year. A minimum of 2.1 years of LARC usage would result in cost-savings compared to SARC usage. This analysis finds that even if LARC methods are not used for their full durations of efficacy, they become cost-saving relative to SARC methods within 3 years of use. Previous economic arguments in support of using LARC methods have been criticized for not considering that LARC methods are not always used for their full duration of efficacy. This study calculated that cost-savings from LARC methods relative to SARC methods, with discontinuation rates considered, can be realized within 3 years. Copyright © 2014 Elsevier Inc. All rights reserved.

[Analyzing and modeling methods of near infrared spectroscopy for in-situ prediction of oil yield from oil shale].

PubMed

Liu, Jie; Zhang, Fu-Dong; Teng, Fei; Li, Jun; Wang, Zhi-Hong

2014-10-01

In order to in-situ detect the oil yield of oil shale, based on portable near infrared spectroscopy analytical technology, with 66 rock core samples from No. 2 well drilling of Fuyu oil shale base in Jilin, the modeling and analyzing methods for in-situ detection were researched. By the developed portable spectrometer, 3 data formats (reflectance, absorbance and K-M function) spectra were acquired. With 4 different modeling data optimization methods: principal component-mahalanobis distance (PCA-MD) for eliminating abnormal samples, uninformative variables elimination (UVE) for wavelength selection and their combina- tions: PCA-MD + UVE and UVE + PCA-MD, 2 modeling methods: partial least square (PLS) and back propagation artificial neural network (BPANN), and the same data pre-processing, the modeling and analyzing experiment were performed to determine the optimum analysis model and method. The results show that the data format, modeling data optimization method and modeling method all affect the analysis precision of model. Results show that whether or not using the optimization method, reflectance or K-M function is the proper spectrum format of the modeling database for two modeling methods. Using two different modeling methods and four different data optimization methods, the model precisions of the same modeling database are different. For PLS modeling method, the PCA-MD and UVE + PCA-MD data optimization methods can improve the modeling precision of database using K-M function spectrum data format. For BPANN modeling method, UVE, UVE + PCA-MD and PCA- MD + UVE data optimization methods can improve the modeling precision of database using any of the 3 spectrum data formats. In addition to using the reflectance spectra and PCA-MD data optimization method, modeling precision by BPANN method is better than that by PLS method. And modeling with reflectance spectra, UVE optimization method and BPANN modeling method, the model gets the highest analysis precision, its correlation coefficient (Rp) is 0.92, and its standard error of prediction (SEP) is 0.69%.

Relative effectiveness of the Bacteriological Analytical Manual method for the recovery of Salmonella from whole cantaloupes and cantaloupe rinses with selected preenrichment media and rapid methods.

PubMed

Hammack, Thomas S; Valentin-Bon, Iris E; Jacobson, Andrew P; Andrews, Wallace H

2004-05-01

Soak and rinse methods were compared for the recovery of Salmonella from whole cantaloupes. Cantaloupes were surface inoculated with Salmonella cell suspensions and stored for 4 days at 2 to 6 degrees C. Cantaloupes were placed in sterile plastic bags with a nonselective preenrichment broth at a 1:1.5 cantaloupe weight-to-broth volume ratio. The cantaloupe broths were shaken for 5 min at 100 rpm after which 25-ml aliquots (rinse) were removed from the bags. The 25-ml rinses were preenriched in 225-ml portions of the same uninoculated broth type at 35 degrees C for 24 h (rinse method). The remaining cantaloupe broths were incubated at 35 degrees C for 24 h (soak method). The preenrichment broths used were buffered peptone water (BPW), modified BPW, lactose (LAC) broth, and Universal Preenrichment (UP) broth. The Bacteriological Analytical Manual Salmonella culture method was compared with the following rapid methods: the TECRA Unique Salmonella method, the VIDAS ICS/SLM method, and the VIDAS SLM method. The soak method detected significantly more Salmonella-positive cantaloupes (P < 0.05) than did the rinse method: 367 Salmonella-positive cantaloupes of 540 test cantaloupes by the soak method and 24 Salmonella-positive cantaloupes of 540 test cantaloupes by the rinse method. Overall, BPW, LAC, and UP broths were equivalent for the recovery of Salmonella from cantaloupes. Both the VIDAS ICS/SLM and TECRA Unique Salmonella methods detected significantly fewer Salmonella-positive cantaloupes than did the culture method: the VIDAS ICS/SLM method detected 23 of 50 Salmonella-positive cantaloupes (60 tested) and the TECRA Unique Salmonella method detected 16 of 29 Salmonella-positive cantaloupes (60 tested). The VIDAS SLM and culture methods were equivalent: both methods detected 37 of 37 Salmonella-positive cantaloupes (60 tested).

Temperature Profiles of Different Cooling Methods in Porcine Pancreas Procurement

PubMed Central

Weegman, Brad P.; Suszynski, Thomas M.; Scott, William E.; Ferrer, Joana; Avgoustiniatos, Efstathios S.; Anazawa, Takayuki; O’Brien, Timothy D.; Rizzari, Michael D.; Karatzas, Theodore; Jie, Tun; Sutherland, David ER.; Hering, Bernhard J.; Papas, Klearchos K.

2014-01-01

Background Porcine islet xenotransplantation is a promising alternative to human islet allotransplantation. Porcine pancreas cooling needs to be optimized to reduce the warm ischemia time (WIT) following donation after cardiac death, which is associated with poorer islet isolation outcomes. Methods This study examines the effect of 4 different cooling Methods on core porcine pancreas temperature (n=24) and histopathology (n=16). All Methods involved surface cooling with crushed ice and chilled irrigation. Method A, which is the standard for porcine pancreas procurement, used only surface cooling. Method B involved an intravascular flush with cold solution through the pancreas arterial system. Method C involved an intraductal infusion with cold solution through the major pancreatic duct, and Method D combined all 3 cooling Methods. Results Surface cooling alone (Method A) gradually decreased core pancreas temperature to < 10 °C after 30 minutes. Using an intravascular flush (Method B) improved cooling during the entire duration of procurement, but incorporating an intraductal infusion (Method C) rapidly reduced core temperature 15–20 °C within the first 2 minutes of cooling. Combining all methods (Method D) was the most effective at rapidly reducing temperature and providing sustained cooling throughout the duration of procurement, although the recorded WIT was not different between Methods (p=0.36). Histological scores were different between the cooling Methods (p=0.02) and the worst with Method A. There were differences in histological scores between Methods A and C (p=0.02) and Methods A and D (p=0.02), but not between Methods C and D (p=0.95), which may highlight the importance of early cooling using an intraductal infusion. Conclusions In conclusion, surface cooling alone cannot rapidly cool large (porcine or human) pancreata. Additional cooling with an intravascular flush and intraductal infusion results in improved core porcine pancreas temperature profiles during procurement and histopathology scores. These data may also have implications on human pancreas procurement since use of an intraductal infusion is not common practice. PMID:25040217

A comparison of Ki-67 counting methods in luminal Breast Cancer: The Average Method vs. the Hot Spot Method

PubMed Central

Jang, Min Hye; Kim, Hyun Jung; Chung, Yul Ri; Lee, Yangkyu

2017-01-01

In spite of the usefulness of the Ki-67 labeling index (LI) as a prognostic and predictive marker in breast cancer, its clinical application remains limited due to variability in its measurement and the absence of a standard method of interpretation. This study was designed to compare the two methods of assessing Ki-67 LI: the average method vs. the hot spot method and thus to determine which method is more appropriate in predicting prognosis of luminal/HER2-negative breast cancers. Ki-67 LIs were calculated by direct counting of three representative areas of 493 luminal/HER2-negative breast cancers using the two methods. We calculated the differences in the Ki-67 LIs (ΔKi-67) between the two methods and the ratio of the Ki-67 LIs (H/A ratio) of the two methods. In addition, we compared the performance of the Ki-67 LIs obtained by the two methods as prognostic markers. ΔKi-67 ranged from 0.01% to 33.3% and the H/A ratio ranged from 1.0 to 2.6. Based on the receiver operating characteristic curve method, the predictive powers of the KI-67 LI measured by the two methods were similar (Area under curve: hot spot method, 0.711; average method, 0.700). In multivariate analysis, high Ki-67 LI based on either method was an independent poor prognostic factor, along with high T stage and node metastasis. However, in repeated counts, the hot spot method did not consistently classify tumors into high vs. low Ki-67 LI groups. In conclusion, both the average and hot spot method of evaluating Ki-67 LI have good predictive performances for tumor recurrence in luminal/HER2-negative breast cancers. However, we recommend using the average method for the present because of its greater reproducibility. PMID:28187177

A comparison of Ki-67 counting methods in luminal Breast Cancer: The Average Method vs. the Hot Spot Method.

PubMed

Jang, Min Hye; Kim, Hyun Jung; Chung, Yul Ri; Lee, Yangkyu; Park, So Yeon

2017-01-01

In spite of the usefulness of the Ki-67 labeling index (LI) as a prognostic and predictive marker in breast cancer, its clinical application remains limited due to variability in its measurement and the absence of a standard method of interpretation. This study was designed to compare the two methods of assessing Ki-67 LI: the average method vs. the hot spot method and thus to determine which method is more appropriate in predicting prognosis of luminal/HER2-negative breast cancers. Ki-67 LIs were calculated by direct counting of three representative areas of 493 luminal/HER2-negative breast cancers using the two methods. We calculated the differences in the Ki-67 LIs (ΔKi-67) between the two methods and the ratio of the Ki-67 LIs (H/A ratio) of the two methods. In addition, we compared the performance of the Ki-67 LIs obtained by the two methods as prognostic markers. ΔKi-67 ranged from 0.01% to 33.3% and the H/A ratio ranged from 1.0 to 2.6. Based on the receiver operating characteristic curve method, the predictive powers of the KI-67 LI measured by the two methods were similar (Area under curve: hot spot method, 0.711; average method, 0.700). In multivariate analysis, high Ki-67 LI based on either method was an independent poor prognostic factor, along with high T stage and node metastasis. However, in repeated counts, the hot spot method did not consistently classify tumors into high vs. low Ki-67 LI groups. In conclusion, both the average and hot spot method of evaluating Ki-67 LI have good predictive performances for tumor recurrence in luminal/HER2-negative breast cancers. However, we recommend using the average method for the present because of its greater reproducibility.

Estimating Tree Height-Diameter Models with the Bayesian Method

PubMed Central

Duan, Aiguo; Zhang, Jianguo; Xiang, Congwei

2014-01-01

Six candidate height-diameter models were used to analyze the height-diameter relationships. The common methods for estimating the height-diameter models have taken the classical (frequentist) approach based on the frequency interpretation of probability, for example, the nonlinear least squares method (NLS) and the maximum likelihood method (ML). The Bayesian method has an exclusive advantage compared with classical method that the parameters to be estimated are regarded as random variables. In this study, the classical and Bayesian methods were used to estimate six height-diameter models, respectively. Both the classical method and Bayesian method showed that the Weibull model was the “best” model using data1. In addition, based on the Weibull model, data2 was used for comparing Bayesian method with informative priors with uninformative priors and classical method. The results showed that the improvement in prediction accuracy with Bayesian method led to narrower confidence bands of predicted value in comparison to that for the classical method, and the credible bands of parameters with informative priors were also narrower than uninformative priors and classical method. The estimated posterior distributions for parameters can be set as new priors in estimating the parameters using data2. PMID:24711733

Estimating tree height-diameter models with the Bayesian method.

PubMed

Zhang, Xiongqing; Duan, Aiguo; Zhang, Jianguo; Xiang, Congwei

2014-01-01

Six candidate height-diameter models were used to analyze the height-diameter relationships. The common methods for estimating the height-diameter models have taken the classical (frequentist) approach based on the frequency interpretation of probability, for example, the nonlinear least squares method (NLS) and the maximum likelihood method (ML). The Bayesian method has an exclusive advantage compared with classical method that the parameters to be estimated are regarded as random variables. In this study, the classical and Bayesian methods were used to estimate six height-diameter models, respectively. Both the classical method and Bayesian method showed that the Weibull model was the "best" model using data1. In addition, based on the Weibull model, data2 was used for comparing Bayesian method with informative priors with uninformative priors and classical method. The results showed that the improvement in prediction accuracy with Bayesian method led to narrower confidence bands of predicted value in comparison to that for the classical method, and the credible bands of parameters with informative priors were also narrower than uninformative priors and classical method. The estimated posterior distributions for parameters can be set as new priors in estimating the parameters using data2.

A comparison of treatment effectiveness between the CAD/CAM method and the manual method for managing adolescent idiopathic scoliosis.

PubMed

Wong, M S; Cheng, J C Y; Lo, K H

2005-04-01

The treatment effectiveness of the CAD/CAM method and the manual method in managing adolescent idiopathic scoliosis (AIS) was compared. Forty subjects were recruited with twenty subjects for each method. The clinical parameters namely Cobb's angle and apical vertebral rotation were evaluated at the pre-brace and the immediate in-brace visits. The results demonstrated that orthotic treatments rendered by the CAD/CAM method and the conventional manual method were effective in providing initial control of Cobb's angle. Significant decreases (p < 0.05) were found between the pre-brace and immediate in-brace visits for both methods. The mean reductions of Cobb's angle were 12.8 degrees (41.9%) for the CAD/CAM method and 9.8 degrees (32.1%) for the manual method. An initial control of the apical vertebral rotation was not shown in this study. In the comparison between the CAD/CAM method and the manual method, no significant difference was found in the control of Cobb's angle and apical vertebral rotation. The current study demonstrated that the CAD/CAM method can provide similar result in the initial stage of treatment as compared with the manual method.

A brief introduction to computer-intensive methods, with a view towards applications in spatial statistics and stereology.

PubMed

Mattfeldt, Torsten

2011-04-01

Computer-intensive methods may be defined as data analytical procedures involving a huge number of highly repetitive computations. We mention resampling methods with replacement (bootstrap methods), resampling methods without replacement (randomization tests) and simulation methods. The resampling methods are based on simple and robust principles and are largely free from distributional assumptions. Bootstrap methods may be used to compute confidence intervals for a scalar model parameter and for summary statistics from replicated planar point patterns, and for significance tests. For some simple models of planar point processes, point patterns can be simulated by elementary Monte Carlo methods. The simulation of models with more complex interaction properties usually requires more advanced computing methods. In this context, we mention simulation of Gibbs processes with Markov chain Monte Carlo methods using the Metropolis-Hastings algorithm. An alternative to simulations on the basis of a parametric model consists of stochastic reconstruction methods. The basic ideas behind the methods are briefly reviewed and illustrated by simple worked examples in order to encourage novices in the field to use computer-intensive methods. © 2010 The Authors Journal of Microscopy © 2010 Royal Microscopical Society.

Costs and Efficiency of Online and Offline Recruitment Methods: A Web-Based Cohort Study.

PubMed

Christensen, Tina; Riis, Anders H; Hatch, Elizabeth E; Wise, Lauren A; Nielsen, Marie G; Rothman, Kenneth J; Toft Sørensen, Henrik; Mikkelsen, Ellen M

2017-03-01

The Internet is widely used to conduct research studies on health issues. Many different methods are used to recruit participants for such studies, but little is known about how various recruitment methods compare in terms of efficiency and costs. The aim of our study was to compare online and offline recruitment methods for Internet-based studies in terms of efficiency (number of recruited participants) and costs per participant. We employed several online and offline recruitment methods to enroll 18- to 45-year-old women in an Internet-based Danish prospective cohort study on fertility. Offline methods included press releases, posters, and flyers. Online methods comprised advertisements placed on five different websites, including Facebook and Netdoktor.dk. We defined seven categories of mutually exclusive recruitment methods and used electronic tracking via unique Uniform Resource Locator (URL) and self-reported data to identify the recruitment method for each participant. For each method, we calculated the average cost per participant and efficiency, that is, the total number of recruited participants. We recruited 8252 study participants. Of these, 534 were excluded as they could not be assigned to a specific recruitment method. The final study population included 7724 participants, of whom 803 (10.4%) were recruited by offline methods, 3985 (51.6%) by online methods, 2382 (30.8%) by online methods not initiated by us, and 554 (7.2%) by other methods. Overall, the average cost per participant was €6.22 for online methods initiated by us versus €9.06 for offline methods. Costs per participant ranged from €2.74 to €105.53 for online methods and from €0 to €67.50 for offline methods. Lowest average costs per participant were for those recruited from Netdoktor.dk (€2.99) and from Facebook (€3.44). In our Internet-based cohort study, online recruitment methods were superior to offline methods in terms of efficiency (total number of participants enrolled). The average cost per recruited participant was also lower for online than for offline methods, although costs varied greatly among both online and offline recruitment methods. We observed a decrease in the efficiency of some online recruitment methods over time, suggesting that it may be optimal to adopt multiple online methods. ©Tina Christensen, Anders H Riis, Elizabeth E Hatch, Lauren A Wise, Marie G Nielsen, Kenneth J Rothman, Henrik Toft Sørensen, Ellen M Mikkelsen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 01.03.2017.

A simple high performance liquid chromatography method for analyzing paraquat in soil solution samples.

PubMed

Ouyang, Ying; Mansell, Robert S; Nkedi-Kizza, Peter

2004-01-01

A high performance liquid chromatography (HPLC) method with UV detection was developed to analyze paraquat (1,1'-dimethyl-4,4'-dipyridinium dichloride) herbicide content in soil solution samples. The analytical method was compared with the liquid scintillation counting (LSC) method using 14C-paraquat. Agreement obtained between the two methods was reasonable. However, the detection limit for paraquat analysis was 0.5 mg L(-1) by the HPLC method and 0.05 mg L(-1) by the LSC method. The LSC method was, therefore, 10 times more precise than the HPLC method for solution concentrations less than 1 mg L(-1). In spite of the high detection limit, the UC (nonradioactive) HPLC method provides an inexpensive and environmentally safe means for determining paraquat concentration in soil solution compared with the 14C-LSC method.

Hybrid finite element and Brownian dynamics method for diffusion-controlled reactions.

PubMed

Bauler, Patricia; Huber, Gary A; McCammon, J Andrew

2012-04-28

Diffusion is often the rate determining step in many biological processes. Currently, the two main computational methods for studying diffusion are stochastic methods, such as Brownian dynamics, and continuum methods, such as the finite element method. This paper proposes a new hybrid diffusion method that couples the strengths of each of these two methods. The method is derived for a general multidimensional system, and is presented using a basic test case for 1D linear and radially symmetric diffusion systems.

Application of multiattribute decision-making methods for the determination of relative significance factor of impact categories.

PubMed

Noh, Jaesung; Lee, Kun Mo

2003-05-01

A relative significance factor (f(i)) of an impact category is the external weight of the impact category. The objective of this study is to propose a systematic and easy-to-use method for the determination of f(i). Multiattribute decision-making (MADM) methods including the analytical hierarchy process (AHP), the rank-order centroid method, and the fuzzy method were evaluated for this purpose. The results and practical aspects of using the three methods are compared. Each method shows the same trend, with minor differences in the value of f(i). Thus, all three methods can be applied to the determination of f(i). The rank order centroid method reduces the number of pairwise comparisons by placing the alternatives in order, although it has inherent weakness over the fuzzy method in expressing the degree of vagueness associated with assigning weights to criteria and alternatives. The rank order centroid method is considered a practical method for the determination of f(i) because it is easier and simpler to use compared to the AHP and the fuzzy method.

Utility of N-Bromosuccinimide for the Titrimetric and Spectrophotometric Determination of Famotidine in Pharmaceutical Formulations

PubMed Central

Zenita, O.; Basavaiah, K.

2011-01-01

Two titrimetric and two spectrophotometric methods are described for the assay of famotidine (FMT) in tablets using N-bromosuccinimide (NBS). The first titrimetric method is direct in which FMT is titrated directly with NBS in HCl medium using methyl orange as indicator (method A). The remaining three methods are indirect in which the unreacted NBS is determined after the complete reaction between FMT and NBS by iodometric back titration (method B) or by reacting with a fixed amount of either indigo carmine (method C) or neutral red (method D). The method A and method B are applicable over the range of 2–9 mg and 1–7 mg, respectively. In spectrophotometric methods, Beer's law is obeyed over the concentration ranges of 0.75–6.0 μg mL−1 (method C) and 0.3–3.0 μg mL−1 (method D). The applicability of the developed methods was demonstrated by the determination of FMT in pure drug as well as in tablets. PMID:21760785

Twostep-by-twostep PIRK-type PC methods with continuous output formulas

NASA Astrophysics Data System (ADS)

Cong, Nguyen Huu; Xuan, Le Ngoc

2008-11-01

This paper deals with parallel predictor-corrector (PC) iteration methods based on collocation Runge-Kutta (RK) corrector methods with continuous output formulas for solving nonstiff initial-value problems (IVPs) for systems of first-order differential equations. At nth step, the continuous output formulas are used not only for predicting the stage values in the PC iteration methods but also for calculating the step values at (n+2)th step. In this case, the integration processes can be proceeded twostep-by-twostep. The resulting twostep-by-twostep (TBT) parallel-iterated RK-type (PIRK-type) methods with continuous output formulas (twostep-by-twostep PIRKC methods or TBTPIRKC methods) give us a faster integration process. Fixed stepsize applications of these TBTPIRKC methods to a few widely-used test problems reveal that the new PC methods are much more efficient when compared with the well-known parallel-iterated RK methods (PIRK methods), parallel-iterated RK-type PC methods with continuous output formulas (PIRKC methods) and sequential explicit RK codes DOPRI5 and DOP853 available from the literature.

Which method should be the reference method to evaluate the severity of rheumatic mitral stenosis? Gorlin's method versus 3D-echo.

PubMed

Pérez de Isla, Leopoldo; Casanova, Carlos; Almería, Carlos; Rodrigo, José Luis; Cordeiro, Pedro; Mataix, Luis; Aubele, Ada Lia; Lang, Roberto; Zamorano, José Luis

2007-12-01

Several studies have shown a wide variability among different methods to determine the valve area in patients with rheumatic mitral stenosis. Our aim was to evaluate if 3D-echo planimetry is more accurate than the Gorlin method to measure the valve area. Twenty-six patients with mitral stenosis underwent 2D and 3D-echo echocardiographic examinations and catheterization. Valve area was estimated by different methods. A median value of the mitral valve area, obtained from the measurements of three classical non-invasive methods (2D planimetry, pressure half-time and PISA method), was used as the reference method and it was compared with 3D-echo planimetry and Gorlin's method. Our results showed that the accuracy of 3D-echo planimetry is superior to the accuracy of the Gorlin method for the assessment of mitral valve area. We should keep in mind the fact that 3D-echo planimetry may be a better reference method than the Gorlin method to assess the severity of rheumatic mitral stenosis.

Evaluation and comparison of Abbott Jaffe and enzymatic creatinine methods: Could the old method meet the new requirements?

PubMed

Küme, Tuncay; Sağlam, Barıs; Ergon, Cem; Sisman, Ali Rıza

2018-01-01

The aim of this study is to evaluate and compare the analytical performance characteristics of the two creatinine methods based on the Jaffe and enzymatic methods. Two original creatinine methods, Jaffe and enzymatic, were evaluated on Architect c16000 automated analyzer via limit of detection (LOD) and limit of quantitation (LOQ), linearity, intra-assay and inter-assay precision, and comparability in serum and urine samples. The method comparison and bias estimation using patient samples according to CLSI guideline were performed on 230 serum and 141 urine samples by analyzing on the same auto-analyzer. The LODs were determined as 0.1 mg/dL for both serum methods and as 0.25 and 0.07 mg/dL for the Jaffe and the enzymatic urine method respectively. The LOQs were similar with 0.05 mg/dL value for both serum methods, and enzymatic urine method had a lower LOQ than Jaffe urine method, values at 0.5 and 2 mg/dL respectively. Both methods were linear up to 65 mg/dL for serum and 260 mg/dL for urine. The intra-assay and inter-assay precision data were under desirable levels in both methods. The higher correlations were determined between two methods in serum and urine (r=.9994, r=.9998 respectively). On the other hand, Jaffe method gave the higher creatinine results than enzymatic method, especially at the low concentrations in both serum and urine. Both Jaffe and enzymatic methods were found to meet the analytical performance requirements in routine use. However, enzymatic method was found to have better performance in low creatinine levels. © 2017 Wiley Periodicals, Inc.

Comparison of the lysis centrifugation method with the conventional blood culture method in cases of sepsis in a tertiary care hospital.

PubMed

Parikh, Harshal R; De, Anuradha S; Baveja, Sujata M

2012-07-01

Physicians and microbiologists have long recognized that the presence of living microorganisms in the blood of a patient carries with it considerable morbidity and mortality. Hence, blood cultures have become critically important and frequently performed test in clinical microbiology laboratories for diagnosis of sepsis. To compare the conventional blood culture method with the lysis centrifugation method in cases of sepsis. Two hundred nonduplicate blood cultures from cases of sepsis were analyzed using two blood culture methods concurrently for recovery of bacteria from patients diagnosed clinically with sepsis - the conventional blood culture method using trypticase soy broth and the lysis centrifugation method using saponin by centrifuging at 3000 g for 30 minutes. Overall bacteria recovered from 200 blood cultures were 17.5%. The conventional blood culture method had a higher yield of organisms, especially Gram positive cocci. The lysis centrifugation method was comparable with the former method with respect to Gram negative bacilli. The sensitivity of lysis centrifugation method in comparison to conventional blood culture method was 49.75% in this study, specificity was 98.21% and diagnostic accuracy was 89.5%. In almost every instance, the time required for detection of the growth was earlier by lysis centrifugation method, which was statistically significant. Contamination by lysis centrifugation was minimal, while that by conventional method was high. Time to growth by the lysis centrifugation method was highly significant (P value 0.000) as compared to time to growth by the conventional blood culture method. For the diagnosis of sepsis, combination of the lysis centrifugation method and the conventional blood culture method with trypticase soy broth or biphasic media is advocable, in order to achieve faster recovery and a better yield of microorganisms.

Optimization and validation of spectrophotometric methods for determination of finasteride in dosage and biological forms

PubMed Central

Amin, Alaa S.; Kassem, Mohammed A.

2012-01-01

Aim and Background: Three simple, accurate and sensitive spectrophotometric methods for the determination of finasteride in pure, dosage and biological forms, and in the presence of its oxidative degradates were developed. Materials and Methods: These methods are indirect, involve the addition of excess oxidant potassium permanganate for method A; cerric sulfate [Ce(SO4)2] for methods B; and N-bromosuccinimide (NBS) for method C of known concentration in acid medium to finasteride, and the determination of the unreacted oxidant by measurement of the decrease in absorbance of methylene blue for method A, chromotrope 2R for method B, and amaranth for method C at a suitable maximum wavelength, λmax: 663, 528, and 520 nm, for the three methods, respectively. The reaction conditions for each method were optimized. Results: Regression analysis of the Beer plots showed good correlation in the concentration ranges of 0.12–3.84 μg mL–1 for method A, and 0.12–3.28 μg mL–1 for method B and 0.14 – 3.56 μg mL–1 for method C. The apparent molar absorptivity, Sandell sensitivity, detection and quantification limits were evaluated. The stoichiometric ratio between the finasteride and the oxidant was estimated. The validity of the proposed methods was tested by analyzing dosage forms and biological samples containing finasteride with relative standard deviation ≤ 0.95. Conclusion: The proposed methods could successfully determine the studied drug with varying excess of its oxidative degradation products, with recovery between 99.0 and 101.4, 99.2 and 101.6, and 99.6 and 101.0% for methods A, B, and C, respectively. PMID:23781478

John Butcher and hybrid methods

NASA Astrophysics Data System (ADS)

Mehdiyeva, Galina; Imanova, Mehriban; Ibrahimov, Vagif

2017-07-01

As is known there are the mainly two classes of the numerical methods for solving ODE, which is commonly called a one and multistep methods. Each of these methods has certain advantages and disadvantages. It is obvious that the method which has better properties of these methods should be constructed at the junction of them. In the middle of the XX century, Butcher and Gear has constructed at the junction of the methods of Runge-Kutta and Adams, which is called hybrid method. Here considers the construction of certain generalizations of hybrid methods, with the high order of accuracy and to explore their application to solving the Ordinary Differential, Volterra Integral and Integro-Differential equations. Also have constructed some specific hybrid methods with the degree p ≤ 10.

Critical study of higher order numerical methods for solving the boundary-layer equations

NASA Technical Reports Server (NTRS)

Wornom, S. F.

1978-01-01

A fourth order box method is presented for calculating numerical solutions to parabolic, partial differential equations in two variables or ordinary differential equations. The method, which is the natural extension of the second order box scheme to fourth order, was demonstrated with application to the incompressible, laminar and turbulent, boundary layer equations. The efficiency of the present method is compared with two point and three point higher order methods, namely, the Keller box scheme with Richardson extrapolation, the method of deferred corrections, a three point spline method, and a modified finite element method. For equivalent accuracy, numerical results show the present method to be more efficient than higher order methods for both laminar and turbulent flows.

A temperature match based optimization method for daily load prediction considering DLC effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Z.

This paper presents a unique optimization method for short term load forecasting. The new method is based on the optimal template temperature match between the future and past temperatures. The optimal error reduction technique is a new concept introduced in this paper. Two case studies show that for hourly load forecasting, this method can yield results as good as the rather complicated Box-Jenkins Transfer Function method, and better than the Box-Jenkins method; for peak load prediction, this method is comparable in accuracy to the neural network method with back propagation, and can produce more accurate results than the multi-linear regressionmore » method. The DLC effect on system load is also considered in this method.« less

[Isolation and identification methods of enterobacteria group and its technological advancement].

PubMed

Furuta, Itaru

2007-08-01

In the last half-century, isolation and identification methods of enterobacteria groups have markedly improved by technological advancement. Clinical microbiology tests have changed overtime from tube methods to commercial identification kits and automated identification. Tube methods are the original method for the identification of enterobacteria groups, that is, a basically essential method to recognize bacterial fermentation and biochemical principles. In this paper, traditional tube tests are discussed, such as the utilization of carbohydrates, indole, methyl red, and citrate and urease tests. Commercial identification kits and automated instruments by computer based analysis as current methods are also discussed, and those methods provide rapidity and accuracy. Nonculture techniques of nucleic acid typing methods using PCR analysis, and immunochemical methods using monoclonal antibodies can be further developed.

Comparison of three commercially available fit-test methods.

PubMed

Janssen, Larry L; Luinenburg, D Michael; Mullins, Haskell E; Nelson, Thomas J

2002-01-01

American National Standards Institute (ANSI) standard Z88.10, Respirator Fit Testing Methods, includes criteria to evaluate new fit-tests. The standard allows generated aerosol, particle counting, or controlled negative pressure quantitative fit-tests to be used as the reference method to determine acceptability of a new test. This study examined (1) comparability of three Occupational Safety and Health Administration-accepted fit-test methods, all of which were validated using generated aerosol as the reference method; and (2) the effect of the reference method on the apparent performance of a fit-test method under evaluation. Sequential fit-tests were performed using the controlled negative pressure and particle counting quantitative fit-tests and the bitter aerosol qualitative fit-test. Of 75 fit-tests conducted with each method, the controlled negative pressure method identified 24 failures; bitter aerosol identified 22 failures; and the particle counting method identified 15 failures. The sensitivity of each method, that is, agreement with the reference method in identifying unacceptable fits, was calculated using each of the other two methods as the reference. None of the test methods met the ANSI sensitivity criterion of 0.95 or greater when compared with either of the other two methods. These results demonstrate that (1) the apparent performance of any fit-test depends on the reference method used, and (2) the fit-tests evaluated use different criteria to identify inadequately fitting respirators. Although "acceptable fit" cannot be defined in absolute terms at this time, the ability of existing fit-test methods to reject poor fits can be inferred from workplace protection factor studies.

A Tale of Two Methods: Chart and Interview Methods for Identifying Delirium

PubMed Central

Saczynski, Jane S.; Kosar, Cyrus M.; Xu, Guoquan; Puelle, Margaret R.; Schmitt, Eva; Jones, Richard N.; Marcantonio, Edward R.; Wong, Bonnie; Isaza, Ilean; Inouye, Sharon K.

2014-01-01

Background Interview and chart-based methods for identifying delirium have been validated. However, relative strengths and limitations of each method have not been described, nor has a combined approach (using both interviews and chart), been systematically examined. Objectives To compare chart and interview-based methods for identification of delirium. Design, Setting and Participants Participants were 300 patients aged 70+ undergoing major elective surgery (majority were orthopedic surgery) interviewed daily during hospitalization for delirium using the Confusion Assessment Method (CAM; interview-based method) and whose medical charts were reviewed for delirium using a validated chart-review method (chart-based method). We examined rate of agreement on the two methods and patient characteristics of those identified using each approach. Predictive validity for clinical outcomes (length of stay, postoperative complications, discharge disposition) was compared. In the absence of a gold-standard, predictive value could not be calculated. Results The cumulative incidence of delirium was 23% (n= 68) by the interview-based method, 12% (n=35) by the chart-based method and 27% (n=82) by the combined approach. Overall agreement was 80%; kappa was 0.30. The methods differed in detection of psychomotor features and time of onset. The chart-based method missed delirium in CAM-identified patients laacking features of psychomotor agitation or inappropriate behavior. The CAM-based method missed chart-identified cases occurring during the night shift. The combined method had high predictive validity for all clinical outcomes. Conclusions Interview and chart-based methods have specific strengths for identification of delirium. A combined approach captures the largest number and the broadest range of delirium cases. PMID:24512042

Inventory Management for Irregular Shipment of Goods in Distribution Centre

NASA Astrophysics Data System (ADS)

Takeda, Hitoshi; Kitaoka, Masatoshi; Usuki, Jun

2016-01-01

The shipping amount of commodity goods (Foods, confectionery, dairy products, such as public cosmetic pharmaceutical products) changes irregularly at the distribution center dealing with the general consumer goods. Because the shipment time and the amount of the shipment are irregular, the demand forecast becomes very difficult. For this, the inventory control becomes difficult, too. It cannot be applied to the shipment of the commodity by the conventional inventory control methods. This paper proposes the method for inventory control by cumulative flow curve method. It proposed the method of deciding the order quantity of the inventory control by the cumulative flow curve. Here, it proposes three methods. 1) Power method,2) Polynomial method and 3)Revised Holt's linear method that forecasts data with trends that is a kind of exponential smoothing method. This paper compares the economics of the conventional method, which is managed by the experienced and three new proposed methods. And, the effectiveness of the proposal method is verified from the numerical calculations.

Computational Methods in Drug Discovery

PubMed Central

Sliwoski, Gregory; Kothiwale, Sandeepkumar; Meiler, Jens

2014-01-01

Computer-aided drug discovery/design methods have played a major role in the development of therapeutically important small molecules for over three decades. These methods are broadly classified as either structure-based or ligand-based methods. Structure-based methods are in principle analogous to high-throughput screening in that both target and ligand structure information is imperative. Structure-based approaches include ligand docking, pharmacophore, and ligand design methods. The article discusses theory behind the most important methods and recent successful applications. Ligand-based methods use only ligand information for predicting activity depending on its similarity/dissimilarity to previously known active ligands. We review widely used ligand-based methods such as ligand-based pharmacophores, molecular descriptors, and quantitative structure-activity relationships. In addition, important tools such as target/ligand data bases, homology modeling, ligand fingerprint methods, etc., necessary for successful implementation of various computer-aided drug discovery/design methods in a drug discovery campaign are discussed. Finally, computational methods for toxicity prediction and optimization for favorable physiologic properties are discussed with successful examples from literature. PMID:24381236

[Primary culture of human normal epithelial cells].

PubMed

Tang, Yu; Xu, Wenji; Guo, Wanbei; Xie, Ming; Fang, Huilong; Chen, Chen; Zhou, Jun

2017-11-28

The traditional primary culture methods of human normal epithelial cells have disadvantages of low activity of cultured cells, the low cultivated rate and complicated operation. To solve these problems, researchers made many studies on culture process of human normal primary epithelial cell. In this paper, we mainly introduce some methods used in separation and purification of human normal epithelial cells, such as tissue separation method, enzyme digestion separation method, mechanical brushing method, red blood cell lysis method, percoll layered medium density gradient separation method. We also review some methods used in the culture and subculture, including serum-free medium combined with low mass fraction serum culture method, mouse tail collagen coating method, and glass culture bottle combined with plastic culture dish culture method. The biological characteristics of human normal epithelial cells, the methods of immunocytochemical staining, trypan blue exclusion are described. Moreover, the factors affecting the aseptic operation, the conditions of the extracellular environment, the conditions of the extracellular environment during culture, the number of differential adhesion, and the selection and dosage of additives are summarized.

A Modified Magnetic Gradient Contraction Based Method for Ferromagnetic Target Localization

PubMed Central

Wang, Chen; Zhang, Xiaojuan; Qu, Xiaodong; Pan, Xiao; Fang, Guangyou; Chen, Luzhao

2016-01-01

The Scalar Triangulation and Ranging (STAR) method, which is based upon the unique properties of magnetic gradient contraction, is a high real-time ferromagnetic target localization method. Only one measurement point is required in the STAR method and it is not sensitive to changes in sensing platform orientation. However, the localization accuracy of the method is limited by the asphericity errors and the inaccurate value of position leads to larger errors in the estimation of magnetic moment. To improve the localization accuracy, a modified STAR method is proposed. In the proposed method, the asphericity errors of the traditional STAR method are compensated with an iterative algorithm. The proposed method has a fast convergence rate which meets the requirement of high real-time localization. Simulations and field experiments have been done to evaluate the performance of the proposed method. The results indicate that target parameters estimated by the modified STAR method are more accurate than the traditional STAR method. PMID:27999322

Comparison of three explicit multigrid methods for the Euler and Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Chima, Rodrick V.; Turkel, Eli; Schaffer, Steve

1987-01-01

Three explicit multigrid methods, Ni's method, Jameson's finite-volume method, and a finite-difference method based on Brandt's work, are described and compared for two model problems. All three methods use an explicit multistage Runge-Kutta scheme on the fine grid, and this scheme is also described. Convergence histories for inviscid flow over a bump in a channel for the fine-grid scheme alone show that convergence rate is proportional to Courant number and that implicit residual smoothing can significantly accelerate the scheme. Ni's method was slightly slower than the implicitly-smoothed scheme alone. Brandt's and Jameson's methods are shown to be equivalent in form but differ in their node versus cell-centered implementations. They are about 8.5 times faster than Ni's method in terms of CPU time. Results for an oblique shock/boundary layer interaction problem verify the accuracy of the finite-difference code. All methods slowed considerably on the stretched viscous grid but Brandt's method was still 2.1 times faster than Ni's method.

Robust numerical solution of the reservoir routing equation

NASA Astrophysics Data System (ADS)

Fiorentini, Marcello; Orlandini, Stefano

2013-09-01

The robustness of numerical methods for the solution of the reservoir routing equation is evaluated. The methods considered in this study are: (1) the Laurenson-Pilgrim method, (2) the fourth-order Runge-Kutta method, and (3) the fixed order Cash-Karp method. Method (1) is unable to handle nonmonotonic outflow rating curves. Method (2) is found to fail under critical conditions occurring, especially at the end of inflow recession limbs, when large time steps (greater than 12 min in this application) are used. Method (3) is computationally intensive and it does not solve the limitations of method (2). The limitations of method (2) can be efficiently overcome by reducing the time step in the critical phases of the simulation so as to ensure that water level remains inside the domains of the storage function and the outflow rating curve. The incorporation of a simple backstepping procedure implementing this control into the method (2) yields a robust and accurate reservoir routing method that can be safely used in distributed time-continuous catchment models.

Impact of statistical learning methods on the predictive power of multivariate normal tissue complication probability models.

PubMed

Xu, Cheng-Jian; van der Schaaf, Arjen; Schilstra, Cornelis; Langendijk, Johannes A; van't Veld, Aart A

2012-03-15

To study the impact of different statistical learning methods on the prediction performance of multivariate normal tissue complication probability (NTCP) models. In this study, three learning methods, stepwise selection, least absolute shrinkage and selection operator (LASSO), and Bayesian model averaging (BMA), were used to build NTCP models of xerostomia following radiotherapy treatment for head and neck cancer. Performance of each learning method was evaluated by a repeated cross-validation scheme in order to obtain a fair comparison among methods. It was found that the LASSO and BMA methods produced models with significantly better predictive power than that of the stepwise selection method. Furthermore, the LASSO method yields an easily interpretable model as the stepwise method does, in contrast to the less intuitive BMA method. The commonly used stepwise selection method, which is simple to execute, may be insufficient for NTCP modeling. The LASSO method is recommended. Copyright © 2012 Elsevier Inc. All rights reserved.

Construction of exponentially fitted symplectic Runge-Kutta-Nyström methods from partitioned Runge-Kutta methods

NASA Astrophysics Data System (ADS)

Monovasilis, Theodore; Kalogiratou, Zacharoula; Simos, T. E.

2014-10-01

In this work we derive exponentially fitted symplectic Runge-Kutta-Nyström (RKN) methods from symplectic exponentially fitted partitioned Runge-Kutta (PRK) methods methods (for the approximate solution of general problems of this category see [18] - [40] and references therein). We construct RKN methods from PRK methods with up to five stages and fourth algebraic order.

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study

PubMed Central

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-01-01

Background Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study – often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Methods Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. Results 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods – particularly surveys and individual interviews – but used methods in a wide range of roles. Conclusion Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single context of combining qualitative methods and randomised controlled trials. Health services researchers could further contribute to the development of mixed methods research in the contexts of instrument development, survey and fieldwork, and non-randomised evaluations. PMID:17570838

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor-Pashow, K.; Fondeur, F.; White, T.

Savannah River National Laboratory (SRNL) was tasked with identifying and developing at least one, but preferably two methods for quantifying the suppressor in the Next Generation Solvent (NGS) system. The suppressor is a guanidine derivative, N,N',N"-tris(3,7-dimethyloctyl)guanidine (TiDG). A list of 10 possible methods was generated, and screening experiments were performed for 8 of the 10 methods. After completion of the screening experiments, the non-aqueous acid-base titration was determined to be the most promising, and was selected for further development as the primary method. {sup 1}H NMR also showed promising results from the screening experiments, and this method was selected formore » further development as the secondary method. Other methods, including {sup 36}Cl radiocounting and ion chromatography, also showed promise; however, due to the similarity to the primary method (titration) and the inability to differentiate between TiDG and TOA (tri-n-ocytlamine) in the blended solvent, {sup 1}H NMR was selected over these methods. Analysis of radioactive samples obtained from real waste ESS (extraction, scrub, strip) testing using the titration method showed good results. Based on these results, the titration method was selected as the method of choice for TiDG measurement. {sup 1}H NMR has been selected as the secondary (back-up) method, and additional work is planned to further develop this method and to verify the method using radioactive samples. Procedures for analyzing radioactive samples of both pure NGS and blended solvent were developed and issued for the both methods.« less

Novel atomic absorption spectrometric and rapid spectrophotometric methods for the quantitation of paracetamol in saliva: application to pharmacokinetic studies.

PubMed

Issa, M M; Nejem, R M; El-Abadla, N S; Al-Kholy, M; Saleh, Akila A

2008-01-01

A novel atomic absorption spectrometric method and two highly sensitive spectrophotometric methods were developed for the determination of paracetamol. These techniques based on the oxidation of paracetamol by iron (III) (method I); oxidation of p-aminophenol after the hydrolysis of paracetamol (method II). Iron (II) then reacts with potassium ferricyanide to form Prussian blue color with a maximum absorbance at 700 nm. The atomic absorption method was accomplished by extracting the excess iron (III) in method II and aspirates the aqueous layer into air-acetylene flame to measure the absorbance of iron (II) at 302.1 nm. The reactions have been spectrometrically evaluated to attain optimum experimental conditions. Linear responses were exhibited over the ranges 1.0-10, 0.2-2.0 and 0.1-1.0 mug/ml for method I, method II and atomic absorption spectrometric method, respectively. A high sensitivity is recorded for the proposed methods I and II and atomic absorption spectrometric method value indicate: 0.05, 0.022 and 0.012 mug/ml, respectively. The limit of quantitation of paracetamol by method II and atomic absorption spectrometric method were 0.20 and 0.10 mug/ml. Method II and the atomic absorption spectrometric method were applied to demonstrate a pharmacokinetic study by means of salivary samples in normal volunteers who received 1.0 g paracetamol. Intra and inter-day precision did not exceed 6.9%.

Novel Atomic Absorption Spectrometric and Rapid Spectrophotometric Methods for the Quantitation of Paracetamol in Saliva: Application to Pharmacokinetic Studies

PubMed Central

Issa, M. M.; Nejem, R. M.; El-Abadla, N. S.; Al-Kholy, M.; Saleh, Akila. A.

2008-01-01

A novel atomic absorption spectrometric method and two highly sensitive spectrophotometric methods were developed for the determination of paracetamol. These techniques based on the oxidation of paracetamol by iron (III) (method I); oxidation of p-aminophenol after the hydrolysis of paracetamol (method II). Iron (II) then reacts with potassium ferricyanide to form Prussian blue color with a maximum absorbance at 700 nm. The atomic absorption method was accomplished by extracting the excess iron (III) in method II and aspirates the aqueous layer into air-acetylene flame to measure the absorbance of iron (II) at 302.1 nm. The reactions have been spectrometrically evaluated to attain optimum experimental conditions. Linear responses were exhibited over the ranges 1.0-10, 0.2-2.0 and 0.1-1.0 μg/ml for method I, method II and atomic absorption spectrometric method, respectively. A high sensitivity is recorded for the proposed methods I and II and atomic absorption spectrometric method value indicate: 0.05, 0.022 and 0.012 μg/ml, respectively. The limit of quantitation of paracetamol by method II and atomic absorption spectrometric method were 0.20 and 0.10 μg/ml. Method II and the atomic absorption spectrometric method were applied to demonstrate a pharmacokinetic study by means of salivary samples in normal volunteers who received 1.0 g paracetamol. Intra and inter-day precision did not exceed 6.9%. PMID:20046743

An investigation of new methods for estimating parameter sensitivities

NASA Technical Reports Server (NTRS)

Beltracchi, Todd J.; Gabriele, Gary A.

1989-01-01

The method proposed for estimating sensitivity derivatives is based on the Recursive Quadratic Programming (RQP) method and in conjunction a differencing formula to produce estimates of the sensitivities. This method is compared to existing methods and is shown to be very competitive in terms of the number of function evaluations required. In terms of accuracy, the method is shown to be equivalent to a modified version of the Kuhn-Tucker method, where the Hessian of the Lagrangian is estimated using the BFS method employed by the RQP algorithm. Initial testing on a test set with known sensitivities demonstrates that the method can accurately calculate the parameter sensitivity.

X-ray imaging using amorphous selenium: a photoinduced discharge readout method for digital mammography.

PubMed

Rowlands, J A; Hunter, D M; Araj, N

1991-01-01

A new digital image readout method for electrostatic charge images on photoconductive plates is described. The method can be used to read out images on selenium plates similar to those used in xeromammography. The readout method, called the air-gap photoinduced discharge method (PID), discharges the latent image pixel by pixel and measures the charge. The PID readout method, like electrometer methods, is linear. However, the PID method permits much better resolution than scanning electrometers while maintaining quantum limited performance at high radiation exposure levels. Thus the air-gap PID method appears to be uniquely superior for high-resolution digital imaging tasks such as mammography.

Quantitative naturalistic methods for detecting change points in psychotherapy research: an illustration with alliance ruptures.

PubMed

Eubanks-Carter, Catherine; Gorman, Bernard S; Muran, J Christopher

2012-01-01

Analysis of change points in psychotherapy process could increase our understanding of mechanisms of change. In particular, naturalistic change point detection methods that identify turning points or breakpoints in time series data could enhance our ability to identify and study alliance ruptures and resolutions. This paper presents four categories of statistical methods for detecting change points in psychotherapy process: criterion-based methods, control chart methods, partitioning methods, and regression methods. Each method's utility for identifying shifts in the alliance is illustrated using a case example from the Beth Israel Psychotherapy Research program. Advantages and disadvantages of the various methods are discussed.

A comparative study of interface reconstruction methods for multi-material ALE simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kucharik, Milan; Garimalla, Rao; Schofield, Samuel

2009-01-01

In this paper we compare the performance of different methods for reconstructing interfaces in multi-material compressible flow simulations. The methods compared are a material-order-dependent Volume-of-Fluid (VOF) method, a material-order-independent VOF method based on power diagram partitioning of cells and the Moment-of-Fluid method (MOF). We demonstrate that the MOF method provides the most accurate tracking of interfaces, followed by the VOF method with the right material ordering. The material-order-independent VOF method performs some-what worse than the above two while the solutions with VOF using the wrong material order are considerably worse.

Digital photography and transparency-based methods for measuring wound surface area.

PubMed

Bhedi, Amul; Saxena, Atul K; Gadani, Ravi; Patel, Ritesh

2013-04-01

To compare and determine a credible method of measurement of wound surface area by linear, transparency, and photographic methods for monitoring progress of wound healing accurately and ascertaining whether these methods are significantly different. From April 2005 to December 2006, 40 patients (30 men, 5 women, 5 children) admitted to the surgical ward of Shree Sayaji General Hospital, Baroda, had clean as well as infected wound following trauma, debridement, pressure sore, venous ulcer, and incision and drainage. Wound surface areas were measured by these three methods (linear, transparency, and photographic methods) simultaneously on alternate days. The linear method is statistically and significantly different from transparency and photographic methods (P value <0.05), but there is no significant difference between transparency and photographic methods (P value >0.05). Photographic and transparency methods provided measurements of wound surface area with equivalent result and there was no statistically significant difference between these two methods.

Anatomically-Aided PET Reconstruction Using the Kernel Method

PubMed Central

Hutchcroft, Will; Wang, Guobao; Chen, Kevin T.; Catana, Ciprian; Qi, Jinyi

2016-01-01

This paper extends the kernel method that was proposed previously for dynamic PET reconstruction, to incorporate anatomical side information into the PET reconstruction model. In contrast to existing methods that incorporate anatomical information using a penalized likelihood framework, the proposed method incorporates this information in the simpler maximum likelihood (ML) formulation and is amenable to ordered subsets. The new method also does not require any segmentation of the anatomical image to obtain edge information. We compare the kernel method with the Bowsher method for anatomically-aided PET image reconstruction through a simulated data set. Computer simulations demonstrate that the kernel method offers advantages over the Bowsher method in region of interest (ROI) quantification. Additionally the kernel method is applied to a 3D patient data set. The kernel method results in reduced noise at a matched contrast level compared with the conventional ML expectation maximization (EM) algorithm. PMID:27541810

Anatomically-aided PET reconstruction using the kernel method.

PubMed

Hutchcroft, Will; Wang, Guobao; Chen, Kevin T; Catana, Ciprian; Qi, Jinyi

2016-09-21

This paper extends the kernel method that was proposed previously for dynamic PET reconstruction, to incorporate anatomical side information into the PET reconstruction model. In contrast to existing methods that incorporate anatomical information using a penalized likelihood framework, the proposed method incorporates this information in the simpler maximum likelihood (ML) formulation and is amenable to ordered subsets. The new method also does not require any segmentation of the anatomical image to obtain edge information. We compare the kernel method with the Bowsher method for anatomically-aided PET image reconstruction through a simulated data set. Computer simulations demonstrate that the kernel method offers advantages over the Bowsher method in region of interest quantification. Additionally the kernel method is applied to a 3D patient data set. The kernel method results in reduced noise at a matched contrast level compared with the conventional ML expectation maximization algorithm.

[An automatic peak detection method for LIBS spectrum based on continuous wavelet transform].

PubMed

Chen, Peng-Fei; Tian, Di; Qiao, Shu-Jun; Yang, Guang

2014-07-01

Spectrum peak detection in the laser-induced breakdown spectroscopy (LIBS) is an essential step, but the presence of background and noise seriously disturb the accuracy of peak position. The present paper proposed a method applied to automatic peak detection for LIBS spectrum in order to enhance the ability of overlapping peaks searching and adaptivity. We introduced the ridge peak detection method based on continuous wavelet transform to LIBS, and discussed the choice of the mother wavelet and optimized the scale factor and the shift factor. This method also improved the ridge peak detection method with a correcting ridge method. The experimental results show that compared with other peak detection methods (the direct comparison method, derivative method and ridge peak search method), our method had a significant advantage on the ability to distinguish overlapping peaks and the precision of peak detection, and could be be applied to data processing in LIBS.

A Method of DTM Construction Based on Quadrangular Irregular Networks and Related Error Analysis

PubMed Central

Kang, Mengjun

2015-01-01

A new method of DTM construction based on quadrangular irregular networks (QINs) that considers all the original data points and has a topological matrix is presented. A numerical test and a real-world example are used to comparatively analyse the accuracy of QINs against classical interpolation methods and other DTM representation methods, including SPLINE, KRIGING and triangulated irregular networks (TINs). The numerical test finds that the QIN method is the second-most accurate of the four methods. In the real-world example, DTMs are constructed using QINs and the three classical interpolation methods. The results indicate that the QIN method is the most accurate method tested. The difference in accuracy rank seems to be caused by the locations of the data points sampled. Although the QIN method has drawbacks, it is an alternative method for DTM construction. PMID:25996691

Anatomically-aided PET reconstruction using the kernel method

NASA Astrophysics Data System (ADS)

Hutchcroft, Will; Wang, Guobao; Chen, Kevin T.; Catana, Ciprian; Qi, Jinyi

2016-09-01

This paper extends the kernel method that was proposed previously for dynamic PET reconstruction, to incorporate anatomical side information into the PET reconstruction model. In contrast to existing methods that incorporate anatomical information using a penalized likelihood framework, the proposed method incorporates this information in the simpler maximum likelihood (ML) formulation and is amenable to ordered subsets. The new method also does not require any segmentation of the anatomical image to obtain edge information. We compare the kernel method with the Bowsher method for anatomically-aided PET image reconstruction through a simulated data set. Computer simulations demonstrate that the kernel method offers advantages over the Bowsher method in region of interest quantification. Additionally the kernel method is applied to a 3D patient data set. The kernel method results in reduced noise at a matched contrast level compared with the conventional ML expectation maximization algorithm.

[Theory, method and application of method R on estimation of (co)variance components].

PubMed

Liu, Wen-Zhong

2004-07-01

Theory, method and application of Method R on estimation of (co)variance components were reviewed in order to make the method be reasonably used. Estimation requires R values,which are regressions of predicted random effects that are calculated using complete dataset on predicted random effects that are calculated using random subsets of the same data. By using multivariate iteration algorithm based on a transformation matrix,and combining with the preconditioned conjugate gradient to solve the mixed model equations, the computation efficiency of Method R is much improved. Method R is computationally inexpensive,and the sampling errors and approximate credible intervals of estimates can be obtained. Disadvantages of Method R include a larger sampling variance than other methods for the same data,and biased estimates in small datasets. As an alternative method, Method R can be used in larger datasets. It is necessary to study its theoretical properties and broaden its application range further.

Multiple zeros of polynomials

NASA Technical Reports Server (NTRS)

Wood, C. A.

1974-01-01

For polynomials of higher degree, iterative numerical methods must be used. Four iterative methods are presented for approximating the zeros of a polynomial using a digital computer. Newton's method and Muller's method are two well known iterative methods which are presented. They extract the zeros of a polynomial by generating a sequence of approximations converging to each zero. However, both of these methods are very unstable when used on a polynomial which has multiple zeros. That is, either they fail to converge to some or all of the zeros, or they converge to very bad approximations of the polynomial's zeros. This material introduces two new methods, the greatest common divisor (G.C.D.) method and the repeated greatest common divisor (repeated G.C.D.) method, which are superior methods for numerically approximating the zeros of a polynomial having multiple zeros. These methods were programmed in FORTRAN 4 and comparisons in time and accuracy are given.

Evaluation of the methods for enumerating coliform bacteria from water samples using precise reference standards.

PubMed

Wohlsen, T; Bates, J; Vesey, G; Robinson, W A; Katouli, M

2006-04-01

To use BioBall cultures as a precise reference standard to evaluate methods for enumeration of Escherichia coli and other coliform bacteria in water samples. Eight methods were evaluated including membrane filtration, standard plate count (pour and spread plate methods), defined substrate technology methods (Colilert and Colisure), the most probable number method and the Petrifilm disposable plate method. Escherichia coli and Enterobacter aerogenes BioBall cultures containing 30 organisms each were used. All tests were performed using 10 replicates. The mean recovery of both bacteria varied with the different methods employed. The best and most consistent results were obtained with Petrifilm and the pour plate method. Other methods either yielded a low recovery or showed significantly high variability between replicates. The BioBall is a very suitable quality control tool for evaluating the efficiency of methods for bacterial enumeration in water samples.

Wilsonian methods of concept analysis: a critique.

PubMed

Hupcey, J E; Morse, J M; Lenz, E R; Tasón, M C

1996-01-01

Wilsonian methods of concept analysis--that is, the method proposed by Wilson and Wilson-derived methods in nursing (as described by Walker and Avant; Chinn and Kramer [Jacobs]; Schwartz-Barcott and Kim; and Rodgers)--are discussed and compared in this article. The evolution and modifications of Wilson's method in nursing are described and research that has used these methods, assessed. The transformation of Wilson's method is traced as each author has adopted his techniques and attempted to modify the method to correct for limitations. We suggest that these adaptations and modifications ultimately erode Wilson's method. Further, the Wilson-derived methods have been overly simplified and used by nurse researchers in a prescriptive manner, and the results often do not serve the purpose of expanding nursing knowledge. We conclude that, considering the significance of concept development for the nursing profession, the development of new methods and a means for evaluating conceptual inquiry must be given priority.

The Application of Continuous Wavelet Transform Based Foreground Subtraction Method in 21 cm Sky Surveys

NASA Astrophysics Data System (ADS)

Gu, Junhua; Xu, Haiguang; Wang, Jingying; An, Tao; Chen, Wen

2013-08-01

We propose a continuous wavelet transform based non-parametric foreground subtraction method for the detection of redshifted 21 cm signal from the epoch of reionization. This method works based on the assumption that the foreground spectra are smooth in frequency domain, while the 21 cm signal spectrum is full of saw-tooth-like structures, thus their characteristic scales are significantly different. We can distinguish them in the wavelet coefficient space easily and perform the foreground subtraction. Compared with the traditional spectral fitting based method, our method is more tolerant to complex foregrounds. Furthermore, we also find that when the instrument has uncorrected response error, our method can also work significantly better than the spectral fitting based method. Our method can obtain similar results with the Wp smoothing method, which is also a non-parametric method, but our method consumes much less computing time.

Study report on a double isotope method of calcium absorption

NASA Technical Reports Server (NTRS)

1978-01-01

Some of the pros and cons of three methods to study gastrointestinal calcium absorption are briefly discussed. The methods are: (1) a balance study; (2) a single isotope method; and (3) a double isotope method. A procedure for the double isotope method is also included.

Comparison on genomic predictions using three GBLUP methods and two single-step blending methods in the Nordic Holstein population

PubMed Central

2012-01-01

Background A single-step blending approach allows genomic prediction using information of genotyped and non-genotyped animals simultaneously. However, the combined relationship matrix in a single-step method may need to be adjusted because marker-based and pedigree-based relationship matrices may not be on the same scale. The same may apply when a GBLUP model includes both genomic breeding values and residual polygenic effects. The objective of this study was to compare single-step blending methods and GBLUP methods with and without adjustment of the genomic relationship matrix for genomic prediction of 16 traits in the Nordic Holstein population. Methods The data consisted of de-regressed proofs (DRP) for 5 214 genotyped and 9 374 non-genotyped bulls. The bulls were divided into a training and a validation population by birth date, October 1, 2001. Five approaches for genomic prediction were used: 1) a simple GBLUP method, 2) a GBLUP method with a polygenic effect, 3) an adjusted GBLUP method with a polygenic effect, 4) a single-step blending method, and 5) an adjusted single-step blending method. In the adjusted GBLUP and single-step methods, the genomic relationship matrix was adjusted for the difference of scale between the genomic and the pedigree relationship matrices. A set of weights on the pedigree relationship matrix (ranging from 0.05 to 0.40) was used to build the combined relationship matrix in the single-step blending method and the GBLUP method with a polygenetic effect. Results Averaged over the 16 traits, reliabilities of genomic breeding values predicted using the GBLUP method with a polygenic effect (relative weight of 0.20) were 0.3% higher than reliabilities from the simple GBLUP method (without a polygenic effect). The adjusted single-step blending and original single-step blending methods (relative weight of 0.20) had average reliabilities that were 2.1% and 1.8% higher than the simple GBLUP method, respectively. In addition, the GBLUP method with a polygenic effect led to less bias of genomic predictions than the simple GBLUP method, and both single-step blending methods yielded less bias of predictions than all GBLUP methods. Conclusions The single-step blending method is an appealing approach for practical genomic prediction in dairy cattle. Genomic prediction from the single-step blending method can be improved by adjusting the scale of the genomic relationship matrix. PMID:22455934

Roka Listeria detection method using transcription mediated amplification to detect Listeria species in select foods and surfaces. Performance Tested Method(SM) 011201.

PubMed

Hua, Yang; Kaplan, Shannon; Reshatoff, Michael; Hu, Ernie; Zukowski, Alexis; Schweis, Franz; Gin, Cristal; Maroni, Brett; Becker, Michael; Wisniewski, Michele

2012-01-01

The Roka Listeria Detection Assay was compared to the reference culture methods for nine select foods and three select surfaces. The Roka method used Half-Fraser Broth for enrichment at 35 +/- 2 degrees C for 24-28 h. Comparison of Roka's method to reference methods requires an unpaired approach. Each method had a total of 545 samples inoculated with a Listeria strain. Each food and surface was inoculated with a different strain of Listeria at two different levels per method. For the dairy products (Brie cheese, whole milk, and ice cream), our method was compared to AOAC Official Method(SM) 993.12. For the ready-to-eat meats (deli chicken, cured ham, chicken salad, and hot dogs) and environmental surfaces (sealed concrete, stainless steel, and plastic), these samples were compared to the U.S. Department of Agriculture/Food Safety and Inspection Service-Microbiology Laboratory Guidebook (USDA/FSIS-MLG) method MLG 8.07. Cold-smoked salmon and romaine lettuce were compared to the U.S. Food and Drug Administration/Bacteriological Analytical Manual, Chapter 10 (FDA/BAM) method. Roka's method had 358 positives out of 545 total inoculated samples compared to 332 positive for the reference methods. Overall the probability of detection analysis of the results showed better or equivalent performance compared to the reference methods.

A propagation method with adaptive mesh grid based on wave characteristics for wave optics simulation

NASA Astrophysics Data System (ADS)

Tang, Qiuyan; Wang, Jing; Lv, Pin; Sun, Quan

2015-10-01

Propagation simulation method and choosing mesh grid are both very important to get the correct propagation results in wave optics simulation. A new angular spectrum propagation method with alterable mesh grid based on the traditional angular spectrum method and the direct FFT method is introduced. With this method, the sampling space after propagation is not limited to propagation methods no more, but freely alterable. However, choosing mesh grid on target board influences the validity of simulation results directly. So an adaptive mesh choosing method based on wave characteristics is proposed with the introduced propagation method. We can calculate appropriate mesh grids on target board to get satisfying results. And for complex initial wave field or propagation through inhomogeneous media, we can also calculate and set the mesh grid rationally according to above method. Finally, though comparing with theoretical results, it's shown that the simulation result with the proposed method coinciding with theory. And by comparing with the traditional angular spectrum method and the direct FFT method, it's known that the proposed method is able to adapt to a wider range of Fresnel number conditions. That is to say, the method can simulate propagation results efficiently and correctly with propagation distance of almost zero to infinity. So it can provide better support for more wave propagation applications such as atmospheric optics, laser propagation and so on.

Reliability and accuracy of real-time visualization techniques for measuring school cafeteria tray waste: validating the quarter-waste method.

PubMed

Hanks, Andrew S; Wansink, Brian; Just, David R

2014-03-01

Measuring food waste is essential to determine the impact of school interventions on what children eat. There are multiple methods used for measuring food waste, yet it is unclear which method is most appropriate in large-scale interventions with restricted resources. This study examines which of three visual tray waste measurement methods is most reliable, accurate, and cost-effective compared with the gold standard of individually weighing leftovers. School cafeteria researchers used the following three visual methods to capture tray waste in addition to actual food waste weights for 197 lunch trays: the quarter-waste method, the half-waste method, and the photograph method. Inter-rater and inter-method reliability were highest for on-site visual methods (0.90 for the quarter-waste method and 0.83 for the half-waste method) and lowest for the photograph method (0.48). This low reliability is partially due to the inability of photographs to determine whether packaged items (such as milk or yogurt) are empty or full. In sum, the quarter-waste method was the most appropriate for calculating accurate amounts of tray waste, and the photograph method might be appropriate if researchers only wish to detect significant differences in waste or consumption of selected, unpackaged food. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Modified flotation method with the use of Percoll for the detection of Isospora suis oocysts in suckling piglet faeces.

PubMed

Karamon, Jacek; Ziomko, Irena; Cencek, Tomasz; Sroka, Jacek

2008-10-01

The modification of flotation method for the examination of diarrhoeic piglet faeces for the detection of Isospora suis oocysts was elaborated. The method was based on removing fractions of fat from the sample of faeces by centrifugation with a 25% Percoll solution. The investigations were carried out in comparison to the McMaster method. From five variants of the Percoll flotation method, the best results were obtained when 2ml of flotation liquid per 1g of faeces were used. The limit of detection in the Percoll flotation method was 160 oocysts per 1g, and was better than with the McMaster method. The efficacy of the modified method was confirmed by results obtained in the examination of the I. suis infected piglets. From all faecal samples, positive samples in the Percoll flotation method were double the results than that of the routine method. Oocysts were first detected by the Percoll flotation method on day 4 post-invasion, i.e. one-day earlier than with the McMaster method. During the experiment (except for 3 days), the extensity of I. suis invasion in the litter examined by the Percoll flotation method was higher than that with the McMaster method. The obtained results show that the modified flotation method with the use of Percoll could be applied in the diagnostics of suckling piglet isosporosis.

Comparison of concentration methods for rapid detection of hookworm ova in wastewater matrices using quantitative PCR.

PubMed

Gyawali, P; Ahmed, W; Jagals, P; Sidhu, J P S; Toze, S

2015-12-01

Hookworm infection contributes around 700 million infections worldwide especially in developing nations due to increased use of wastewater for crop production. The effective recovery of hookworm ova from wastewater matrices is difficult due to their low concentrations and heterogeneous distribution. In this study, we compared the recovery rates of (i) four rapid hookworm ova concentration methods from municipal wastewater, and (ii) two concentration methods from sludge samples. Ancylostoma caninum ova were used as surrogate for human hookworm (Ancylostoma duodenale and Necator americanus). Known concentration of A. caninum hookworm ova were seeded into wastewater (treated and raw) and sludge samples collected from two wastewater treatment plants (WWTPs) in Brisbane and Perth, Australia. The A. caninum ova were concentrated from treated and raw wastewater samples using centrifugation (Method A), hollow fiber ultrafiltration (HFUF) (Method B), filtration (Method C) and flotation (Method D) methods. For sludge samples, flotation (Method E) and direct DNA extraction (Method F) methods were used. Among the four methods tested, filtration (Method C) method was able to recover higher concentrations of A. caninum ova consistently from treated wastewater (39-50%) and raw wastewater (7.1-12%) samples collected from both WWTPs. The remaining methods (Methods A, B and D) yielded variable recovery rate ranging from 0.2 to 40% for treated and raw wastewater samples. The recovery rates for sludge samples were poor (0.02-4.7), although, Method F (direct DNA extraction) provided 1-2 orders of magnitude higher recovery rate than Method E (flotation). Based on our results it can be concluded that the recovery rates of hookworm ova from wastewater matrices, especially sludge samples, can be poor and highly variable. Therefore, choice of concentration method is vital for the sensitive detection of hookworm ova in wastewater matrices. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Achieving cost-neutrality with long-acting reversible contraceptive methods⋆

PubMed Central

Trussell, James; Hassan, Fareen; Lowin, Julia; Law, Amy; Filonenko, Anna

2014-01-01

Objectives This analysis aimed to estimate the average annual cost of available reversible contraceptive methods in the United States. In line with literature suggesting long-acting reversible contraceptive (LARC) methods become increasingly cost-saving with extended duration of use, it aimed to also quantify minimum duration of use required for LARC methods to achieve cost-neutrality relative to other reversible contraceptive methods while taking into consideration discontinuation. Study design A three-state economic model was developed to estimate relative costs of no method (chance), four short-acting reversible (SARC) methods (oral contraceptive, ring, patch and injection) and three LARC methods [implant, copper intrauterine device (IUD) and levonorgestrel intrauterine system (LNG-IUS) 20 mcg/24 h (total content 52 mg)]. The analysis was conducted over a 5-year time horizon in 1000 women aged 20–29 years. Method-specific failure and discontinuation rates were based on published literature. Costs associated with drug acquisition, administration and failure (defined as an unintended pregnancy) were considered. Key model outputs were annual average cost per method and minimum duration of LARC method usage to achieve cost-savings compared to SARC methods. Results The two least expensive methods were copper IUD ($304 per women, per year) and LNG-IUS 20 mcg/24 h ($308). Cost of SARC methods ranged between $432 (injection) and $730 (patch), per women, per year. A minimum of 2.1 years of LARC usage would result in cost-savings compared to SARC usage. Conclusions This analysis finds that even if LARC methods are not used for their full durations of efficacy, they become cost-saving relative to SARC methods within 3 years of use. Implications Previous economic arguments in support of using LARC methods have been criticized for not considering that LARC methods are not always used for their full duration of efficacy. This study calculated that cost-savings from LARC methods relative to SARC methods, with discontinuation rates considered, can be realized within 3 years. PMID:25282161

A method for addressing differences in concentrations of fipronil and three degradates obtained by two different laboratory methods

USGS Publications Warehouse

Crawford, Charles G.; Martin, Jeffrey D.

2017-07-21

In October 2012, the U.S. Geological Survey (USGS) began measuring the concentration of the pesticide fipronil and three of its degradates (desulfinylfipronil, fipronil sulfide, and fipronil sulfone) by a new laboratory method using direct aqueous-injection liquid chromatography tandem mass spectrometry (DAI LC–MS/MS). This method replaced the previous method—in use since 2002—that used gas chromatography/mass spectrometry (GC/MS). The performance of the two methods is not comparable for fipronil and the three degradates. Concentrations of these four chemical compounds determined by the DAI LC–MS/MS method are substantially lower than the GC/MS method. A method was developed to correct for the difference in concentrations obtained by the two laboratory methods based on a methods comparison field study done in 2012. Environmental and field matrix spike samples to be analyzed by both methods from 48 stream sites from across the United States were sampled approximately three times each for this study. These data were used to develop a relation between the two laboratory methods for each compound using regression analysis. The relations were used to calibrate data obtained by the older method to the new method in order to remove any biases attributable to differences in the methods. The coefficients of the equations obtained from the regressions were used to calibrate over 16,600 observations of fipronil, as well as the three degradates determined by the GC/MS method retrieved from the USGS National Water Information System. The calibrated values were then compared to over 7,800 observations of fipronil and to the three degradates determined by the DAI LC–MS/MS method also retrieved from the National Water Information System. The original and calibrated values from the GC/MS method, along with measures of uncertainty in the calibrated values and the original values from the DAI LC–MS/MS method, are provided in an accompanying data release.

24 CFR 291.90 - Sales methods.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Sales methods. 291.90 Section 291....90 Sales methods. HUD will prescribe the terms and conditions for all methods of sale. HUD may, in... following methods of sale: (a) Future REO acquisition method. The Future Real Estate-Owned (REO) acquisition...

24 CFR 291.90 - Sales methods.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Sales methods. 291.90 Section 291....90 Sales methods. HUD will prescribe the terms and conditions for all methods of sale. HUD may, in... following methods of sale: (a) Future REO acquisition method. The Future Real Estate-Owned (REO) acquisition...

24 CFR 291.90 - Sales methods.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Sales methods. 291.90 Section 291....90 Sales methods. HUD will prescribe the terms and conditions for all methods of sale. HUD may, in... following methods of sale: (a) Future REO acquisition method. The Future Real Estate-Owned (REO) acquisition...

24 CFR 291.90 - Sales methods.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Sales methods. 291.90 Section 291....90 Sales methods. HUD will prescribe the terms and conditions for all methods of sale. HUD may, in... following methods of sale: (a) Future REO acquisition method. The Future Real Estate-Owned (REO) acquisition...

77 FR 48733 - Transitional Program for Covered Business Method Patents-Definitions of Covered Business Method...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Office 37 CFR Part 42 Transitional Program for Covered Business Method Patents--Definitions of Covered Business Method Patent and Technological Invention; Final Rule #0;#0;Federal Register / Vol. 77 , No. 157... Business Method Patents-- Definitions of Covered Business Method Patent and Technological Invention AGENCY...

24 CFR 291.90 - Sales methods.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Sales methods. 291.90 Section 291....90 Sales methods. HUD will prescribe the terms and conditions for all methods of sale. HUD may, in... following methods of sale: (a) Future REO acquisition method. The Future Real Estate-Owned (REO) acquisition...

40 CFR 136.6 - Method modifications and analytical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... person or laboratory using a test procedure (analytical method) in this Part. (2) Chemistry of the method... (analytical method) provided that the chemistry of the method or the determinative technique is not changed... prevent efficient recovery of organic pollutants and prevent the method from meeting QC requirements, the...

A Review of Methods for Missing Data.

ERIC Educational Resources Information Center

Pigott, Therese D.

2001-01-01

Reviews methods for handling missing data in a research study. Model-based methods, such as maximum likelihood using the EM algorithm and multiple imputation, hold more promise than ad hoc methods. Although model-based methods require more specialized computer programs and assumptions about the nature of missing data, these methods are appropriate…

The Views of Turkish Pre-Service Teachers about Effectiveness of Cluster Method as a Teaching Writing Method

ERIC Educational Resources Information Center

Kitis, Emine; Türkel, Ali

2017-01-01

The aim of this study is to find out Turkish pre-service teachers' views on effectiveness of cluster method as a writing teaching method. The Cluster Method can be defined as a connotative creative writing method. The way the method works is that the person who brainstorms on connotations of a word or a concept in abscence of any kind of…

Assay of fluoxetine hydrochloride by titrimetric and HPLC methods.

PubMed

Bueno, F; Bergold, A M; Fröehlich, P E

2000-01-01

Two alternative methods were proposed to assay Fluoxetine Hydrochloride: a titrimetric method and another by HPLC using as mobile phase water pH 3.5: acetonitrile (65:35). These methods were applied to the determination of Fluoxetine as such or in formulations (capsules). The titrimetric method is an alternative for pharmacies and small industries. Both methods showed accuracy and precision and are an alternative to the official methods.

Thermophysical Properties of Matter - The TPRC Data Series. Volume 3. Thermal Conductivity - Nonmetallic Liquids and Gases

DTIC Science & Technology

1970-01-01

design and experimentation. I. The Shock- Tube Method Smiley [546] introduced the use of shock waves...one of the greatest disadvantages of this technique. Both the unique adaptability of the shock tube method for high -temperature measurement of...Line-Source Flow Method H. The Hot-Wire Thermal Diffusion Column Method I. The Shock- Tube Method J. The Arc Method K. The Ultrasonic Method .

New methods for the numerical integration of ordinary differential equations and their application to the equations of motion of spacecraft

NASA Technical Reports Server (NTRS)

Banyukevich, A.; Ziolkovski, K.

1975-01-01

A number of hybrid methods for solving Cauchy problems are described on the basis of an evaluation of advantages of single and multiple-point numerical integration methods. The selection criterion is the principle of minimizing computer time. The methods discussed include the Nordsieck method, the Bulirsch-Stoer extrapolation method, and the method of recursive Taylor-Steffensen power series.

Comparison of measurement methods for capacitive tactile sensors and their implementation

NASA Astrophysics Data System (ADS)

Tarapata, Grzegorz; Sienkiewicz, Rafał

2015-09-01

This paper presents a review of ideas and implementations of measurement methods utilized for capacity measurements in tactile sensors. The paper describes technical method, charge amplification method, generation and as well integration method. Three selected methods were implemented in dedicated measurement system and utilised for capacitance measurements of ourselves made tactile sensors. The tactile sensors tested in this work were fully fabricated with the inkjet printing technology. The tests result were presented and summarised. The charge amplification method (CDC) was selected as the best method for the measurement of the tactile sensors.

On time discretizations for spectral methods. [numerical integration of Fourier and Chebyshev methods for dynamic partial differential equations

NASA Technical Reports Server (NTRS)

Gottlieb, D.; Turkel, E.

1980-01-01

New methods are introduced for the time integration of the Fourier and Chebyshev methods of solution for dynamic differential equations. These methods are unconditionally stable, even though no matrix inversions are required. Time steps are chosen by accuracy requirements alone. For the Fourier method both leapfrog and Runge-Kutta methods are considered. For the Chebyshev method only Runge-Kutta schemes are tested. Numerical calculations are presented to verify the analytic results. Applications to the shallow water equations are presented.

Comparison of Response Surface Construction Methods for Derivative Estimation Using Moving Least Squares, Kriging and Radial Basis Functions

NASA Technical Reports Server (NTRS)

Krishnamurthy, Thiagarajan

2005-01-01

Response construction methods using Moving Least Squares (MLS), Kriging and Radial Basis Functions (RBF) are compared with the Global Least Squares (GLS) method in three numerical examples for derivative generation capability. Also, a new Interpolating Moving Least Squares (IMLS) method adopted from the meshless method is presented. It is found that the response surface construction methods using the Kriging and RBF interpolation yields more accurate results compared with MLS and GLS methods. Several computational aspects of the response surface construction methods also discussed.

Two smart spectrophotometric methods for the simultaneous estimation of Simvastatin and Ezetimibe in combined dosage form

NASA Astrophysics Data System (ADS)

Magdy, Nancy; Ayad, Miriam F.

2015-02-01

Two simple, accurate, precise, sensitive and economic spectrophotometric methods were developed for the simultaneous determination of Simvastatin and Ezetimibe in fixed dose combination products without prior separation. The first method depends on a new chemometrics-assisted ratio spectra derivative method using moving window polynomial least square fitting method (Savitzky-Golay filters). The second method is based on a simple modification for the ratio subtraction method. The suggested methods were validated according to USP guidelines and can be applied for routine quality control testing.

Application of LC/MS/MS Techniques to Development of US ...

EPA Pesticide Factsheets

This presentation will describe the U.S. EPA’s drinking water and ambient water method development program in relation to the process employed and the typical challenges encountered in developing standardized LC/MS/MS methods for chemicals of emerging concern. The EPA’s Drinking Water Contaminant Candidate List and Unregulated Contaminant Monitoring Regulations, which are the driving forces behind drinking water method development, will be introduced. Three drinking water LC/MS/MS methods (Methods 537, 544 and a new method for nonylphenol) and two ambient water LC/MS/MS methods for cyanotoxins will be described that highlight some of the challenges encountered during development of these methods. This presentation will provide the audience with basic understanding of EPA's drinking water method development program and an introduction to two new ambient water EPA methods.

The Roche Immunoturbidimetric Albumin Method on Cobas c 501 Gives Higher Values Than the Abbott and Roche BCP Methods When Analyzing Patient Plasma Samples.

PubMed

Helmersson-Karlqvist, Johanna; Flodin, Mats; Havelka, Aleksandra Mandic; Xu, Xiao Yan; Larsson, Anders

2016-09-01

Serum/plasma albumin is an important and widely used laboratory marker and it is important that we measure albumin correctly without bias. We had indications that the immunoturbidimetric method on Cobas c 501 and the bromocresol purple (BCP) method on Architect 16000 differed, so we decided to study these methods more closely. A total of 1,951 patient requests with albumin measured with both the Architect BCP and Cobas immunoturbidimetric methods were extracted from the laboratory system. A comparison with fresh plasma samples was also performed that included immunoturbidimetric and BCP methods on Cobas c 501 and analysis of the international protein calibrator ERM-DA470k/IFCC. The median difference between the Abbott BCP and Roche immunoturbidimetric methods was 3.3 g/l and the Roche method overestimated ERM-DA470k/IFCC by 2.2 g/l. The Roche immunoturbidimetric method gave higher values than the Roche BCP method: y = 1.111x - 0.739, R² = 0.971. The Roche immunoturbidimetric albumin method gives clearly higher values than the Abbott and Roche BCP methods when analyzing fresh patient samples. The differences between the two methods were similar at normal and low albumin levels. © 2016 Wiley Periodicals, Inc.

Manual tracing versus smartphone application (app) tracing: a comparative study.

PubMed

Sayar, Gülşilay; Kilinc, Delal Dara

2017-11-01

This study aimed to compare the results of conventional manual cephalometric tracing with those acquired with smartphone application cephalometric tracing. The cephalometric radiographs of 55 patients (25 females and 30 males) were traced via the manual and app methods and were subsequently examined with Steiner's analysis. Five skeletal measurements, five dental measurements and two soft tissue measurements were managed based on 21 landmarks. The durations of the performances of the two methods were also compared. SNA (Sella, Nasion, A point angle) and SNB (Sella, Nasion, B point angle) values for the manual method were statistically lower (p < .001) than those for the app method. The ANB value for the manual method was statistically lower than that of app method. L1-NB (°) and upper lip protrusion values for the manual method were statistically higher than those for the app method. Go-GN/SN, U1-NA (°) and U1-NA (mm) values for manual method were statistically lower than those for the app method. No differences between the two methods were found in the L1-NB (mm), occlusal plane to SN, interincisal angle or lower lip protrusion values. Although statistically significant differences were found between the two methods, the cephalometric tracing proceeded faster with the app method than with the manual method.

Contraceptive Method Choice Among Young Adults: Influence of Individual and Relationship Factors.

PubMed

Harvey, S Marie; Oakley, Lisa P; Washburn, Isaac; Agnew, Christopher R

2018-01-26

Because decisions related to contraceptive behavior are often made by young adults in the context of specific relationships, the relational context likely influences use of contraceptives. Data presented here are from in-person structured interviews with 536 Black, Hispanic, and White young adults from East Los Angeles, California. We collected partner-specific relational and contraceptive data on all sexual partnerships for each individual, on four occasions, over one year. Using three-level multinomial logistic regression models, we examined individual and relationship factors predictive of contraceptive use. Results indicated that both individual and relationship factors predicted contraceptive use, but factors varied by method. Participants reporting greater perceived partner exclusivity and relationship commitment were more likely to use hormonal/long-acting methods only or a less effective method/no method versus condoms only. Those with greater participation in sexual decision making were more likely to use any method over a less effective method/no method and were more likely to use condoms only or dual methods versus a hormonal/long-acting method only. In addition, for women only, those who reported greater relationship commitment were more likely to use hormonal/long-acting methods or a less effective method/no method versus a dual method. In summary, interactive relationship qualities and dynamics (commitment and sexual decision making) significantly predicted contraceptive use.

[A study for testing the antifungal susceptibility of yeast by the Japanese Society for Medical Mycology (JSMM) method. The proposal of the modified JSMM method 2009].

PubMed

Nishiyama, Yayoi; Abe, Michiko; Ikeda, Reiko; Uno, Jun; Oguri, Toyoko; Shibuya, Kazutoshi; Maesaki, Shigefumi; Mohri, Shinobu; Yamada, Tsuyoshi; Ishibashi, Hiroko; Hasumi, Yayoi; Abe, Shigeru

2010-01-01

The Japanese Society for Medical Mycology (JSMM) method used for testing the antifungal susceptibility of yeast, the MIC end point for azole antifungal agents, is currently set at IC(80). It was recently shown, however that there is an inconsistency in the MIC value between the JSMM method and the CLSI M27-A2 (CLSI) method, in which the end- point was to read as IC(50). To resolve this discrepancy and reassess the JSMM method, the MIC for three azoles, fluconazole, itraconazole and voriconazole were compared to 5 strains of each of the following Candida species: C. albicans, C. glabrata, C. tropicalis, C. parapsilosis and C. krusei, for a total of 25 comparisons, using the JSMM method, a modified JSMM method, and the CLSI method. The results showed that when the MIC end- point criterion of the JSMM method was changed from IC(80) to IC(50) (the modified JSMM method) , the MIC value was consistent and compatible with the CLSI method. Finally, it should be emphasized that the JSMM method, using a spectrophotometer for MIC measurement, was superior in both stability and reproducibility, as compared to the CLSI method in which growth was assessed by visual observation.

Modified Fully Utilized Design (MFUD) Method for Stress and Displacement Constraints

NASA Technical Reports Server (NTRS)

Patnaik, Surya; Gendy, Atef; Berke, Laszlo; Hopkins, Dale

1997-01-01

The traditional fully stressed method performs satisfactorily for stress-limited structural design. When this method is extended to include displacement limitations in addition to stress constraints, it is known as the fully utilized design (FUD). Typically, the FUD produces an overdesign, which is the primary limitation of this otherwise elegant method. We have modified FUD in an attempt to alleviate the limitation. This new method, called the modified fully utilized design (MFUD) method, has been tested successfully on a number of designs that were subjected to multiple loads and had both stress and displacement constraints. The solutions obtained with MFUD compare favorably with the optimum results that can be generated by using nonlinear mathematical programming techniques. The MFUD method appears to have alleviated the overdesign condition and offers the simplicity of a direct, fully stressed type of design method that is distinctly different from optimization and optimality criteria formulations. The MFUD method is being developed for practicing engineers who favor traditional design methods rather than methods based on advanced calculus and nonlinear mathematical programming techniques. The Integrated Force Method (IFM) was found to be the appropriate analysis tool in the development of the MFUD method. In this paper, the MFUD method and its optimality are presented along with a number of illustrative examples.

Accuracy of two geocoding methods for geographic information system-based exposure assessment in epidemiological studies.

PubMed

Faure, Elodie; Danjou, Aurélie M N; Clavel-Chapelon, Françoise; Boutron-Ruault, Marie-Christine; Dossus, Laure; Fervers, Béatrice

2017-02-24

Environmental exposure assessment based on Geographic Information Systems (GIS) and study participants' residential proximity to environmental exposure sources relies on the positional accuracy of subjects' residences to avoid misclassification bias. Our study compared the positional accuracy of two automatic geocoding methods to a manual reference method. We geocoded 4,247 address records representing the residential history (1990-2008) of 1,685 women from the French national E3N cohort living in the Rhône-Alpes region. We compared two automatic geocoding methods, a free-online geocoding service (method A) and an in-house geocoder (method B), to a reference layer created by manually relocating addresses from method A (method R). For each automatic geocoding method, positional accuracy levels were compared according to the urban/rural status of addresses and time-periods (1990-2000, 2001-2008), using Chi Square tests. Kappa statistics were performed to assess agreement of positional accuracy of both methods A and B with the reference method, overall, by time-periods and by urban/rural status of addresses. Respectively 81.4% and 84.4% of addresses were geocoded to the exact address (65.1% and 61.4%) or to the street segment (16.3% and 23.0%) with methods A and B. In the reference layer, geocoding accuracy was higher in urban areas compared to rural areas (74.4% vs. 10.5% addresses geocoded to the address or interpolated address level, p < 0.0001); no difference was observed according to the period of residence. Compared to the reference method, median positional errors were 0.0 m (IQR = 0.0-37.2 m) and 26.5 m (8.0-134.8 m), with positional errors <100 m for 82.5% and 71.3% of addresses, for method A and method B respectively. Positional agreement of method A and method B with method R was 'substantial' for both methods, with kappa coefficients of 0.60 and 0.61 for methods A and B, respectively. Our study demonstrates the feasibility of geocoding residential addresses in epidemiological studies not initially recorded for environmental exposure assessment, for both recent addresses and residence locations more than 20 years ago. Accuracy of the two automatic geocoding methods was comparable. The in-house method (B) allowed a better control of the geocoding process and was less time consuming.

Comparison of reproducibility of natural head position using two methods.

PubMed

Khan, Abdul Rahim; Rajesh, R N G; Dinesh, M R; Sanjay, N; Girish, K S; Venkataraghavan, Karthik

2012-01-01

Lateral cephalometric radiographs have become virtually indispensable to orthodontists in the treatment of patients. They are important in orthodontic growth analysis, diagnosis, treatment planning, monitoring of therapy and evaluation of final treatment outcome. The purpose of this study was to evaluate and compare the maximum reproducibility with minimum variation of natural head position using two methods, i.e. the mirror method and the fluid level device method. The study included two sets of 40 lateral cephalograms taken using two methods of obtaining natural head position: (1) The mirror method and (2) fluid level device method, with a time interval of 2 months. Inclusion criteria • Subjects were randomly selected aged between 18 to 26 years Exclusion criteria • History of orthodontic treatment • Any history of respiratory tract problem or chronic mouth breathing • Any congenital deformity • History of traumatically-induced deformity • History of myofacial pain syndrome • Any previous history of head and neck surgery. The result showed that both the methods for obtaining natural head position-the mirror method and fluid level device method were comparable, but maximum reproducibility was more with the fluid level device as shown by the Dahlberg's coefficient and Bland-Altman plot. The minimum variance was seen with the fluid level device method as shown by Precision and Pearson correlation. The mirror method and the fluid level device method used for obtaining natural head position were comparable without any significance, and the fluid level device method was more reproducible and showed less variance when compared to mirror method for obtaining natural head position. Fluid level device method was more reproducible and shows less variance when compared to mirror method for obtaining natural head position.

Comparing four non-invasive methods to determine the ventilatory anaerobic threshold during cardiopulmonary exercise testing in children with congenital heart or lung disease.

PubMed

Visschers, Naomi C A; Hulzebos, Erik H; van Brussel, Marco; Takken, Tim

2015-11-01

The ventilatory anaerobic threshold (VAT) is an important method to assess the aerobic fitness in patients with cardiopulmonary disease. Several methods exist to determine the VAT; however, there is no consensus which of these methods is the most accurate. To compare four different non-invasive methods for the determination of the VAT via respiratory gas exchange analysis during a cardiopulmonary exercise test (CPET). A secondary objective is to determine the interobserver reliability of the VAT. CPET data of 30 children diagnosed with either cystic fibrosis (CF; N = 15) or with a surgically corrected dextro-transposition of the great arteries (asoTGA; N = 15) were included. No significant differences were found between conditions or among testers. The RER = 1 method differed the most compared to the other methods, showing significant higher results in all six variables. The PET-O2 method differed significantly on five of six and four of six exercise variables with the V-slope method and the VentEq method, respectively. The V-slope and the VentEq method differed significantly on one of six exercise variables. Ten of thirteen ICCs that were >0.80 had a 95% CI > 0.70. The RER = 1 method and the V-slope method had the highest number of significant ICCs and 95% CIs. The V-slope method, the ventilatory equivalent method and the PET-O2 method are comparable and reliable methods to determine the VAT during CPET in children with CF or asoTGA. © 2014 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

Evaluation of Four Methods for Predicting Carbon Stocks of Korean Pine Plantations in Heilongjiang Province, China

PubMed Central

Gao, Huilin; Dong, Lihu; Li, Fengri; Zhang, Lianjun

2015-01-01

A total of 89 trees of Korean pine (Pinus koraiensis) were destructively sampled from the plantations in Heilongjiang Province, P.R. China. The sample trees were measured and calculated for the biomass and carbon stocks of tree components (i.e., stem, branch, foliage and root). Both compatible biomass and carbon stock models were developed with the total biomass and total carbon stocks as the constraints, respectively. Four methods were used to evaluate the carbon stocks of tree components. The first method predicted carbon stocks directly by the compatible carbon stocks models (Method 1). The other three methods indirectly predicted the carbon stocks in two steps: (1) estimating the biomass by the compatible biomass models, and (2) multiplying the estimated biomass by three different carbon conversion factors (i.e., carbon conversion factor 0.5 (Method 2), average carbon concentration of the sample trees (Method 3), and average carbon concentration of each tree component (Method 4)). The prediction errors of estimating the carbon stocks were compared and tested for the differences between the four methods. The results showed that the compatible biomass and carbon models with tree diameter (D) as the sole independent variable performed well so that Method 1 was the best method for predicting the carbon stocks of tree components and total. There were significant differences among the four methods for the carbon stock of stem. Method 2 produced the largest error, especially for stem and total. Methods 3 and Method 4 were slightly worse than Method 1, but the differences were not statistically significant. In practice, the indirect method using the mean carbon concentration of individual trees was sufficient to obtain accurate carbon stocks estimation if carbon stocks models are not available. PMID:26659257

A LSQR-type method provides a computationally efficient automated optimal choice of regularization parameter in diffuse optical tomography.

PubMed

Prakash, Jaya; Yalavarthy, Phaneendra K

2013-03-01

Developing a computationally efficient automated method for the optimal choice of regularization parameter in diffuse optical tomography. The least-squares QR (LSQR)-type method that uses Lanczos bidiagonalization is known to be computationally efficient in performing the reconstruction procedure in diffuse optical tomography. The same is effectively deployed via an optimization procedure that uses the simplex method to find the optimal regularization parameter. The proposed LSQR-type method is compared with the traditional methods such as L-curve, generalized cross-validation (GCV), and recently proposed minimal residual method (MRM)-based choice of regularization parameter using numerical and experimental phantom data. The results indicate that the proposed LSQR-type and MRM-based methods performance in terms of reconstructed image quality is similar and superior compared to L-curve and GCV-based methods. The proposed method computational complexity is at least five times lower compared to MRM-based method, making it an optimal technique. The LSQR-type method was able to overcome the inherent limitation of computationally expensive nature of MRM-based automated way finding the optimal regularization parameter in diffuse optical tomographic imaging, making this method more suitable to be deployed in real-time.

A New Online Calibration Method Based on Lord's Bias-Correction.

PubMed

He, Yinhong; Chen, Ping; Li, Yong; Zhang, Shumei

2017-09-01

Online calibration technique has been widely employed to calibrate new items due to its advantages. Method A is the simplest online calibration method and has attracted many attentions from researchers recently. However, a key assumption of Method A is that it treats person-parameter estimates θ ^ s (obtained by maximum likelihood estimation [MLE]) as their true values θ s , thus the deviation of the estimated θ ^ s from their true values might yield inaccurate item calibration when the deviation is nonignorable. To improve the performance of Method A, a new method, MLE-LBCI-Method A, is proposed. This new method combines a modified Lord's bias-correction method (named as maximum likelihood estimation-Lord's bias-correction with iteration [MLE-LBCI]) with the original Method A in an effort to correct the deviation of θ ^ s which may adversely affect the item calibration precision. Two simulation studies were carried out to explore the performance of both MLE-LBCI and MLE-LBCI-Method A under several scenarios. Simulation results showed that MLE-LBCI could make a significant improvement over the ML ability estimates, and MLE-LBCI-Method A did outperform Method A in almost all experimental conditions.

Qualitative versus quantitative methods in psychiatric research.

PubMed

Razafsha, Mahdi; Behforuzi, Hura; Azari, Hassan; Zhang, Zhiqun; Wang, Kevin K; Kobeissy, Firas H; Gold, Mark S

2012-01-01

Qualitative studies are gaining their credibility after a period of being misinterpreted as "not being quantitative." Qualitative method is a broad umbrella term for research methodologies that describe and explain individuals' experiences, behaviors, interactions, and social contexts. In-depth interview, focus groups, and participant observation are among the qualitative methods of inquiry commonly used in psychiatry. Researchers measure the frequency of occurring events using quantitative methods; however, qualitative methods provide a broader understanding and a more thorough reasoning behind the event. Hence, it is considered to be of special importance in psychiatry. Besides hypothesis generation in earlier phases of the research, qualitative methods can be employed in questionnaire design, diagnostic criteria establishment, feasibility studies, as well as studies of attitude and beliefs. Animal models are another area that qualitative methods can be employed, especially when naturalistic observation of animal behavior is important. However, since qualitative results can be researcher's own view, they need to be statistically confirmed, quantitative methods. The tendency to combine both qualitative and quantitative methods as complementary methods has emerged over recent years. By applying both methods of research, scientists can take advantage of interpretative characteristics of qualitative methods as well as experimental dimensions of quantitative methods.

Methods of Farm Guidance

ERIC Educational Resources Information Center

Vir, Dharm

1971-01-01

A survey of teaching methods for farm guidance workers in India, outlining some approaches developed by and used in other nations. Discusses mass educational methods, group educational methods, and the local leadership method. (JB)

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study.

PubMed

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-06-14

Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study--often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods--particularly surveys and individual interviews--but used methods in a wide range of roles. Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single context of combining qualitative methods and randomised controlled trials. Health services researchers could further contribute to the development of mixed methods research in the contexts of instrument development, survey and fieldwork, and non-randomised evaluations.

New hybrid conjugate gradient methods with the generalized Wolfe line search.

PubMed

Xu, Xiao; Kong, Fan-Yu

2016-01-01

The conjugate gradient method was an efficient technique for solving the unconstrained optimization problem. In this paper, we made a linear combination with parameters β k of the DY method and the HS method, and putted forward the hybrid method of DY and HS. We also proposed the hybrid of FR and PRP by the same mean. Additionally, to present the two hybrid methods, we promoted the Wolfe line search respectively to compute the step size α k of the two hybrid methods. With the new Wolfe line search, the two hybrid methods had descent property and global convergence property of the two hybrid methods that can also be proved.

Research on the calibration methods of the luminance parameter of radiation luminance meters

NASA Astrophysics Data System (ADS)

Cheng, Weihai; Huang, Biyong; Lin, Fangsheng; Li, Tiecheng; Yin, Dejin; Lai, Lei

2017-10-01

This paper introduces standard diffusion reflection white plate method and integrating sphere standard luminance source method to calibrate the luminance parameter. The paper compares the effects of calibration results by using these two methods through principle analysis and experimental verification. After using two methods to calibrate the same radiation luminance meter, the data obtained verifies the testing results of the two methods are both reliable. The results show that the display value using standard white plate method has fewer errors and better reproducibility. However, standard luminance source method is more convenient and suitable for on-site calibration. Moreover, standard luminance source method has wider range and can test the linear performance of the instruments.

The change and development of statistical methods used in research articles in child development 1930-2010.

PubMed

Køppe, Simo; Dammeyer, Jesper

2014-09-01

The evolution of developmental psychology has been characterized by the use of different quantitative and qualitative methods and procedures. But how does the use of methods and procedures change over time? This study explores the change and development of statistical methods used in articles published in Child Development from 1930 to 2010. The methods used in every article in the first issue of every volume were categorized into four categories. Until 1980 relatively simple statistical methods were used. During the last 30 years there has been an explosive use of more advanced statistical methods employed. The absence of statistical methods or use of simple methods had been eliminated.

Social network extraction based on Web: 1. Related superficial methods

NASA Astrophysics Data System (ADS)

Khairuddin Matyuso Nasution, Mahyuddin

2018-01-01

Often the nature of something affects methods to resolve the related issues about it. Likewise, methods to extract social networks from the Web, but involve the structured data types differently. This paper reveals several methods of social network extraction from the same sources that is Web: the basic superficial method, the underlying superficial method, the description superficial method, and the related superficial methods. In complexity we derive the inequalities between methods and so are their computations. In this case, we find that different results from the same tools make the difference from the more complex to the simpler: Extraction of social network by involving co-occurrence is more complex than using occurrences.

Performance of a proposed determinative method for p-TSA in rainbow trout fillet tissue and bridging the proposed method with a method for total chloramine-T residues in rainbow trout fillet tissue

USGS Publications Warehouse

Meinertz, J.R.; Stehly, G.R.; Gingerich, W.H.; Greseth, Shari L.

2001-01-01

Chloramine-T is an effective drug for controlling fish mortality caused by bacterial gill disease. As part of the data required for approval of chloramine-T use in aquaculture, depletion of the chloramine-T marker residue (para-toluenesulfonamide; p-TSA) from edible fillet tissue of fish must be characterized. Declaration of p-TSA as the marker residue for chloramine-T in rainbow trout was based on total residue depletion studies using a method that used time consuming and cumbersome techniques. A simple and robust method recently developed is being proposed as a determinative method for p-TSA in fish fillet tissue. The proposed determinative method was evaluated by comparing accuracy and precision data with U.S. Food and Drug Administration criteria and by bridging the method to the former method for chloramine-T residues. The method accuracy and precision fulfilled the criteria for determinative methods; accuracy was 92.6, 93.4, and 94.6% with samples fortified at 0.5X, 1X, and 2X the expected 1000 ng/g tolerance limit for p-TSA, respectively. Method precision with tissue containing incurred p-TSA at a nominal concentration of 1000 ng/g ranged from 0.80 to 8.4%. The proposed determinative method was successfully bridged with the former method. The concentrations of p-TSA developed with the proposed method were not statistically different at p < 0.05 from p-TSA concentrations developed with the former method.

Standard setting: comparison of two methods.

PubMed

George, Sanju; Haque, M Sayeed; Oyebode, Femi

2006-09-14

The outcome of assessments is determined by the standard-setting method used. There is a wide range of standard-setting methods and the two used most extensively in undergraduate medical education in the UK are the norm-reference and the criterion-reference methods. The aims of the study were to compare these two standard-setting methods for a multiple-choice question examination and to estimate the test-retest and inter-rater reliability of the modified Angoff method. The norm-reference method of standard-setting (mean minus 1 SD) was applied to the 'raw' scores of 78 4th-year medical students on a multiple-choice examination (MCQ). Two panels of raters also set the standard using the modified Angoff method for the same multiple-choice question paper on two occasions (6 months apart). We compared the pass/fail rates derived from the norm reference and the Angoff methods and also assessed the test-retest and inter-rater reliability of the modified Angoff method. The pass rate with the norm-reference method was 85% (66/78) and that by the Angoff method was 100% (78 out of 78). The percentage agreement between Angoff method and norm-reference was 78% (95% CI 69% - 87%). The modified Angoff method had an inter-rater reliability of 0.81-0.82 and a test-retest reliability of 0.59-0.74. There were significant differences in the outcomes of these two standard-setting methods, as shown by the difference in the proportion of candidates that passed and failed the assessment. The modified Angoff method was found to have good inter-rater reliability and moderate test-retest reliability.

Women's Contraceptive Preference-Use Mismatch

PubMed Central

He, Katherine; Dalton, Vanessa K.; Zochowski, Melissa K.

2017-01-01

Abstract Background: Family planning research has not adequately addressed women's preferences for different contraceptive methods and whether women's contraceptive experiences match their preferences. Methods: Data were drawn from the Women's Healthcare Experiences and Preferences Study, an Internet survey of 1,078 women aged 18–55 randomly sampled from a national probability panel. Survey items assessed women's preferences for contraceptive methods, match between methods preferred and used, and perceived reasons for mismatch. We estimated predictors of contraceptive preference with multinomial logistic regression models. Results: Among women at risk for pregnancy who responded with their preferred method (n = 363), hormonal methods (non-LARC [long-acting reversible contraception]) were the most preferred method (34%), followed by no method (23%) and LARC (18%). Sociodemographic differences in contraception method preferences were noted (p-values <0.05), generally with minority, married, and older women having higher rates of preferring less effective methods, compared to their counterparts. Thirty-six percent of women reported preference-use mismatch, with the majority preferring more effective methods than those they were using. Rates of match between preferred and usual methods were highest for LARC (76%), hormonal (non-LARC) (65%), and no method (65%). The most common reasons for mismatch were cost/insurance (41%), lack of perceived/actual need (34%), and method-specific preference concerns (19%). Conclusion: While preference for effective contraception was common among this sample of women, we found substantial mismatch between preferred and usual methods, notably among women of lower socioeconomic status and women using less effective methods. Findings may have implications for patient-centered contraceptive interventions. PMID:27710196

Validation of various adaptive threshold methods of segmentation applied to follicular lymphoma digital images stained with 3,3’-Diaminobenzidine&Haematoxylin

PubMed Central

2013-01-01

The comparative study of the results of various segmentation methods for the digital images of the follicular lymphoma cancer tissue section is described in this paper. The sensitivity and specificity and some other parameters of the following adaptive threshold methods of segmentation: the Niblack method, the Sauvola method, the White method, the Bernsen method, the Yasuda method and the Palumbo method, are calculated. Methods are applied to three types of images constructed by extraction of the brown colour information from the artificial images synthesized based on counterpart experimentally captured images. This paper presents usefulness of the microscopic image synthesis method in evaluation as well as comparison of the image processing results. The results of thoughtful analysis of broad range of adaptive threshold methods applied to: (1) the blue channel of RGB, (2) the brown colour extracted by deconvolution and (3) the ’brown component’ extracted from RGB allows to select some pairs: method and type of image for which this method is most efficient considering various criteria e.g. accuracy and precision in area detection or accuracy in number of objects detection and so on. The comparison shows that the White, the Bernsen and the Sauvola methods results are better than the results of the rest of the methods for all types of monochromatic images. All three methods segments the immunopositive nuclei with the mean accuracy of 0.9952, 0.9942 and 0.9944 respectively, when treated totally. However the best results are achieved for monochromatic image in which intensity shows brown colour map constructed by colour deconvolution algorithm. The specificity in the cases of the Bernsen and the White methods is 1 and sensitivities are: 0.74 for White and 0.91 for Bernsen methods while the Sauvola method achieves sensitivity value of 0.74 and the specificity value of 0.99. According to Bland-Altman plot the Sauvola method selected objects are segmented without undercutting the area for true positive objects but with extra false positive objects. The Sauvola and the Bernsen methods gives complementary results what will be exploited when the new method of virtual tissue slides segmentation be develop. Virtual Slides The virtual slides for this article can be found here: slide 1: http://diagnosticpathology.slidepath.com/dih/webViewer.php?snapshotId=13617947952577 and slide 2: http://diagnosticpathology.slidepath.com/dih/webViewer.php?snapshotId=13617948230017. PMID:23531405

Validation of various adaptive threshold methods of segmentation applied to follicular lymphoma digital images stained with 3,3'-Diaminobenzidine&Haematoxylin.

PubMed

Korzynska, Anna; Roszkowiak, Lukasz; Lopez, Carlos; Bosch, Ramon; Witkowski, Lukasz; Lejeune, Marylene

2013-03-25

The comparative study of the results of various segmentation methods for the digital images of the follicular lymphoma cancer tissue section is described in this paper. The sensitivity and specificity and some other parameters of the following adaptive threshold methods of segmentation: the Niblack method, the Sauvola method, the White method, the Bernsen method, the Yasuda method and the Palumbo method, are calculated. Methods are applied to three types of images constructed by extraction of the brown colour information from the artificial images synthesized based on counterpart experimentally captured images. This paper presents usefulness of the microscopic image synthesis method in evaluation as well as comparison of the image processing results. The results of thoughtful analysis of broad range of adaptive threshold methods applied to: (1) the blue channel of RGB, (2) the brown colour extracted by deconvolution and (3) the 'brown component' extracted from RGB allows to select some pairs: method and type of image for which this method is most efficient considering various criteria e.g. accuracy and precision in area detection or accuracy in number of objects detection and so on. The comparison shows that the White, the Bernsen and the Sauvola methods results are better than the results of the rest of the methods for all types of monochromatic images. All three methods segments the immunopositive nuclei with the mean accuracy of 0.9952, 0.9942 and 0.9944 respectively, when treated totally. However the best results are achieved for monochromatic image in which intensity shows brown colour map constructed by colour deconvolution algorithm. The specificity in the cases of the Bernsen and the White methods is 1 and sensitivities are: 0.74 for White and 0.91 for Bernsen methods while the Sauvola method achieves sensitivity value of 0.74 and the specificity value of 0.99. According to Bland-Altman plot the Sauvola method selected objects are segmented without undercutting the area for true positive objects but with extra false positive objects. The Sauvola and the Bernsen methods gives complementary results what will be exploited when the new method of virtual tissue slides segmentation be develop. The virtual slides for this article can be found here: slide 1: http://diagnosticpathology.slidepath.com/dih/webViewer.php?snapshotId=13617947952577 and slide 2: http://diagnosticpathology.slidepath.com/dih/webViewer.php?snapshotId=13617948230017.

Numerical Grid Generation and Potential Airfoil Analysis and Design

DTIC Science & Technology

1988-01-01

Gauss- Seidel , SOR and ADI iterative methods e JACOBI METHOD In the Jacobi method each new value of a function is computed entirely from old values...preceding iteration and adding the inhomogeneous (boundary condition) term. * GAUSS- SEIDEL METHOD When we compute I in a Jacobi method, we have already...Gauss- Seidel method. Sufficient condition for p convergence of the Gauss- Seidel method is diagonal-dominance of [A].9W e SUCESSIVE OVER-RELAXATION (SOR

Evaluation of intrinsic respiratory signal determination methods for 4D CBCT adapted for mice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Rachael; Pan, Tinsu, E-mail: tpan@mdanderson.org; Rubinstein, Ashley

Purpose: 4D CT imaging in mice is important in a variety of areas including studies of lung function and tumor motion. A necessary step in 4D imaging is obtaining a respiratory signal, which can be done through an external system or intrinsically through the projection images. A number of methods have been developed that can successfully determine the respiratory signal from cone-beam projection images of humans, however only a few have been utilized in a preclinical setting and most of these rely on step-and-shoot style imaging. The purpose of this work is to assess and make adaptions of several successfulmore » methods developed for humans for an image-guided preclinical radiation therapy system. Methods: Respiratory signals were determined from the projection images of free-breathing mice scanned on the X-RAD system using four methods: the so-called Amsterdam shroud method, a method based on the phase of the Fourier transform, a pixel intensity method, and a center of mass method. The Amsterdam shroud method was modified so the sharp inspiration peaks associated with anesthetized mouse breathing could be detected. Respiratory signals were used to sort projections into phase bins and 4D images were reconstructed. Error and standard deviation in the assignment of phase bins for the four methods compared to a manual method considered to be ground truth were calculated for a range of region of interest (ROI) sizes. Qualitative comparisons were additionally made between the 4D images obtained using each of the methods and the manual method. Results: 4D images were successfully created for all mice with each of the respiratory signal extraction methods. Only minimal qualitative differences were noted between each of the methods and the manual method. The average error (and standard deviation) in phase bin assignment was 0.24 ± 0.08 (0.49 ± 0.11) phase bins for the Fourier transform method, 0.09 ± 0.03 (0.31 ± 0.08) phase bins for the modified Amsterdam shroud method, 0.09 ± 0.02 (0.33 ± 0.07) phase bins for the intensity method, and 0.37 ± 0.10 (0.57 ± 0.08) phase bins for the center of mass method. Little dependence on ROI size was noted for the modified Amsterdam shroud and intensity methods while the Fourier transform and center of mass methods showed a noticeable dependence on the ROI size. Conclusions: The modified Amsterdam shroud, Fourier transform, and intensity respiratory signal methods are sufficiently accurate to be used for 4D imaging on the X-RAD system and show improvement over the existing center of mass method. The intensity and modified Amsterdam shroud methods are recommended due to their high accuracy and low dependence on ROI size.« less

26 CFR 1.167(b)-2 - Declining balance method.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 2 2014-04-01 2014-04-01 false Declining balance method. 1.167(b)-2 Section 1... Declining balance method. (a) Application of method. Under the declining balance method a uniform rate is.... While salvage is not taken into account in determining the annual allowances under this method, in no...

77 FR 60985 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-05

... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of three new equivalent methods for monitoring ambient air quality. SUMMARY... equivalent methods, one for measuring concentrations of PM 2.5 , one for measuring concentrations of PM 10...

40 CFR Appendix A to Part 425 - Potassium Ferricyanide Titration Method

Code of Federal Regulations, 2010 CFR

2010-07-01

... Method A Appendix A to Part 425 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Appendix A to Part 425—Potassium Ferricyanide Titration Method Source The potassium ferricyanide titration method is based on method SLM 4/2 described in “Official Method of Analysis,” Society of Leather Trades...

40 CFR Appendix A to Part 425 - Potassium Ferricyanide Titration Method

Code of Federal Regulations, 2012 CFR

2012-07-01

... Method A Appendix A to Part 425 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED..., App. A Appendix A to Part 425—Potassium Ferricyanide Titration Method Source The potassium ferricyanide titration method is based on method SLM 4/2 described in “Official Method of Analysis,” Society of...

78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

40 CFR Appendix A to Part 425 - Potassium Ferricyanide Titration Method

Code of Federal Regulations, 2011 CFR

2011-07-01

... Method A Appendix A to Part 425 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Appendix A to Part 425—Potassium Ferricyanide Titration Method Source The potassium ferricyanide titration method is based on method SLM 4/2 described in “Official Method of Analysis,” Society of Leather Trades...

78 FR 22540 - Notice of Public Meeting/Webinar: EPA Method Development Update on Drinking Water Testing Methods...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

...: EPA Method Development Update on Drinking Water Testing Methods for Contaminant Candidate List... Division will describe methods currently in development for many CCL contaminants, with an expectation that several of these methods will support future cycles of the Unregulated Contaminant Monitoring Rule (UCMR...

Problems d'elaboration d'une methode locale: la methode "Paris-Khartoum" (Problems in Implementing a Local Method: the Paris-Khartoum Method)

ERIC Educational Resources Information Center

Penhoat, Loick; Sakow, Kostia

1978-01-01

A description of the development and implementation of a method introduced in the Sudan that attempts to relate to Sudanese culture and to motivate students. The relationship between language teaching methods and the total educational system is discussed. (AMH)

Exponentially fitted symplectic Runge-Kutta-Nyström methods derived by partitioned Runge-Kutta methods

NASA Astrophysics Data System (ADS)

Monovasilis, Th.; Kalogiratou, Z.; Simos, T. E.

2013-10-01

In this work we derive symplectic EF/TF RKN methods by symplectic EF/TF PRK methods. Also EF/TF symplectic RKN methods are constructed directly from classical symplectic RKN methods. Several numerical examples will be given in order to decide which is the most favourable implementation.

Standard methods for chemical analysis of steel, cast iron, open-hearth iron, and wrought iron

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1973-01-01

Methods are described for determining manganese, phosphorus, sulfur, selenium, copper, nickel, chromium, vanadium, tungsten, titanium, lead, boron, molybdenum ( alpha -benzoin oxime method), zirconium (cupferron --phosphate method), niobium and tantalum (hydrolysis with perchloric and sulfurous acids (gravimetric, titrimetric, and photometric methods)), and beryllium (oxide method). (DHM)

Detection of coupling delay: A problem not yet solved

NASA Astrophysics Data System (ADS)

Coufal, David; Jakubík, Jozef; Jajcay, Nikola; Hlinka, Jaroslav; Krakovská, Anna; Paluš, Milan

2017-08-01

Nonparametric detection of coupling delay in unidirectionally and bidirectionally coupled nonlinear dynamical systems is examined. Both continuous and discrete-time systems are considered. Two methods of detection are assessed—the method based on conditional mutual information—the CMI method (also known as the transfer entropy method) and the method of convergent cross mapping—the CCM method. Computer simulations show that neither method is generally reliable in the detection of coupling delays. For continuous-time chaotic systems, the CMI method appears to be more sensitive and applicable in a broader range of coupling parameters than the CCM method. In the case of tested discrete-time dynamical systems, the CCM method has been found to be more sensitive, while the CMI method required much stronger coupling strength in order to bring correct results. However, when studied systems contain a strong oscillatory component in their dynamics, results of both methods become ambiguous. The presented study suggests that results of the tested algorithms should be interpreted with utmost care and the nonparametric detection of coupling delay, in general, is a problem not yet solved.

An historical survey of computational methods in optimal control.

NASA Technical Reports Server (NTRS)

Polak, E.

1973-01-01

Review of some of the salient theoretical developments in the specific area of optimal control algorithms. The first algorithms for optimal control were aimed at unconstrained problems and were derived by using first- and second-variation methods of the calculus of variations. These methods have subsequently been recognized as gradient, Newton-Raphson, or Gauss-Newton methods in function space. A much more recent addition to the arsenal of unconstrained optimal control algorithms are several variations of conjugate-gradient methods. At first, constrained optimal control problems could only be solved by exterior penalty function methods. Later algorithms specifically designed for constrained problems have appeared. Among these are methods for solving the unconstrained linear quadratic regulator problem, as well as certain constrained minimum-time and minimum-energy problems. Differential-dynamic programming was developed from dynamic programming considerations. The conditional-gradient method, the gradient-projection method, and a couple of feasible directions methods were obtained as extensions or adaptations of related algorithms for finite-dimensional problems. Finally, the so-called epsilon-methods combine the Ritz method with penalty function techniques.

Identifying Outliers of Non-Gaussian Groundwater State Data Based on Ensemble Estimation for Long-Term Trends

NASA Astrophysics Data System (ADS)

Park, E.; Jeong, J.; Choi, J.; Han, W. S.; Yun, S. T.

2016-12-01

Three modified outlier identification methods: the three sigma rule (3s), inter quantile range (IQR) and median absolute deviation (MAD), which take advantage of the ensemble regression method are proposed. For validation purposes, the performance of the methods is compared using simulated and actual groundwater data with a few hypothetical conditions. In the validations using simulated data, all of the proposed methods reasonably identify outliers at a 5% outlier level; whereas, only the IQR method performs well for identifying outliers at a 30% outlier level. When applying the methods to real groundwater data, the outlier identification performance of the IQR method is found to be superior to the other two methods. However, the IQR method is found to have a limitation in the false identification of excessive outliers, which may be supplemented by joint applications with the other methods (i.e., the 3s rule and MAD methods). The proposed methods can be also applied as a potential tool for future anomaly detection by model training based on currently available data.

Overview of paint removal methods

NASA Astrophysics Data System (ADS)

Foster, Terry

1995-04-01

With the introduction of strict environmental regulations governing the use and disposal of methylene chloride and phenols, major components of chemical paint strippers, there have been many new environmentally safe and effective methods of paint removal developed. The new methods developed for removing coatings from aircraft and aircraft components include: mechanical methods using abrasive media such as plastic, wheat starch, walnut shells, ice and dry ice, environmentally safe chemical strippers and paint softeners, and optical methods such as lasers and flash lamps. Each method has its advantages and disadvantages, and some have unique applications. For example, mechanical and abrasive methods can damage sensitive surfaces such as composite materials and strict control of blast parameters and conditions are required. Optical methods can be slow, leaving paint residues, and chemical methods may not remove all of the coating or require special coating formulations to be effective. As an introduction to environmentally safe and effective methods of paint removal, this paper is an overview of the various methods available. The purpose of this overview is to introduce the various paint removal methods available.

Newton's method

DOE Office of Scientific and Technical Information (OSTI.GOV)

More, J. J.; Sorensen, D. C.

1982-02-01

Newton's method plays a central role in the development of numerical techniques for optimization. In fact, most of the current practical methods for optimization can be viewed as variations on Newton's method. It is therefore important to understand Newton's method as an algorithm in its own right and as a key introduction to the most recent ideas in this area. One of the aims of this expository paper is to present and analyze two main approaches to Newton's method for unconstrained minimization: the line search approach and the trust region approach. The other aim is to present some of themore » recent developments in the optimization field which are related to Newton's method. In particular, we explore several variations on Newton's method which are appropriate for large scale problems, and we also show how quasi-Newton methods can be derived quite naturally from Newton's method.« less

[Comparison of two nucleic acid extraction methods for norovirus in oysters].

PubMed

Yuan, Qiao; Li, Hui; Deng, Xiaoling; Mo, Yanling; Fang, Ling; Ke, Changwen

2013-04-01

To explore a convenient and effective method for norovirus nucleic acid extraction from oysters suitable for long-term viral surveillance. Two methods, namely method A (glycine washing and polyethylene glycol precipitation of the virus followed by silica gel centrifugal column) and method B (protease K digestion followed by application of paramagnetic silicon) were compared for their performance in norovirus nucleic acid extraction from oysters. Real-time RT-PCR was used to detect norovirus in naturally infected oysters and in oysters with induced infection. The two methods yielded comparable positive detection rates for the samples, but the recovery rate of the virus was higher with method B than with method A. Method B is a more convenient and rapid method for norovirus nucleic acid extraction from oysters and suitable for long-term surveillance of norovirus.

On the Formulation of Weakly Singular Displacement/Traction Integral Equations; and Their Solution by the MLPG Method

NASA Technical Reports Server (NTRS)

Atluri, Satya N.; Shen, Shengping

2002-01-01

In this paper, a very simple method is used to derive the weakly singular traction boundary integral equation based on the integral relationships for displacement gradients. The concept of the MLPG method is employed to solve the integral equations, especially those arising in solid mechanics. A moving Least Squares (MLS) interpolation is selected to approximate the trial functions in this paper. Five boundary integral Solution methods are introduced: direct solution method; displacement boundary-value problem; traction boundary-value problem; mixed boundary-value problem; and boundary variational principle. Based on the local weak form of the BIE, four different nodal-based local test functions are selected, leading to four different MLPG methods for each BIE solution method. These methods combine the advantages of the MLPG method and the boundary element method.

A numerical method to solve the 1D and the 2D reaction diffusion equation based on Bessel functions and Jacobian free Newton-Krylov subspace methods

NASA Astrophysics Data System (ADS)

Parand, K.; Nikarya, M.

2017-11-01

In this paper a novel method will be introduced to solve a nonlinear partial differential equation (PDE). In the proposed method, we use the spectral collocation method based on Bessel functions of the first kind and the Jacobian free Newton-generalized minimum residual (JFNGMRes) method with adaptive preconditioner. In this work a nonlinear PDE has been converted to a nonlinear system of algebraic equations using the collocation method based on Bessel functions without any linearization, discretization or getting the help of any other methods. Finally, by using JFNGMRes, the solution of the nonlinear algebraic system is achieved. To illustrate the reliability and efficiency of the proposed method, we solve some examples of the famous Fisher equation. We compare our results with other methods.

Mending the Gap, An Effort to Aid the Transfer of Formal Methods Technology

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly

2009-01-01

Formal methods can be applied to many of the development and verification activities required for civil avionics software. RTCA/DO-178B, Software Considerations in Airborne Systems and Equipment Certification, gives a brief description of using formal methods as an alternate method of compliance with the objectives of that standard. Despite this, the avionics industry at large has been hesitant to adopt formal methods, with few developers have actually used formal methods for certification credit. Why is this so, given the volume of evidence of the benefits of formal methods? This presentation will explore some of the challenges to using formal methods in a certification context and describe the effort by the Formal Methods Subgroup of RTCA SC-205/EUROCAE WG-71 to develop guidance to make the use of formal methods a recognized approach.

Methods for the calculation of axial wave numbers in lined ducts with mean flow

NASA Technical Reports Server (NTRS)

Eversman, W.

1981-01-01

A survey is made of the methods available for the calculation of axial wave numbers in lined ducts. Rectangular and circular ducts with both uniform and non-uniform flow are considered as are ducts with peripherally varying liners. A historical perspective is provided by a discussion of the classical methods for computing attenuation when no mean flow is present. When flow is present these techniques become either impractical or impossible. A number of direct eigenvalue determination schemes which have been used when flow is present are discussed. Methods described are extensions of the classical no-flow technique, perturbation methods based on the no-flow technique, direct integration methods for solution of the eigenvalue equation, an integration-iteration method based on the governing differential equation for acoustic transmission, Galerkin methods, finite difference methods, and finite element methods.

Optimal projection method determination by Logdet Divergence and perturbed von-Neumann Divergence.

PubMed

Jiang, Hao; Ching, Wai-Ki; Qiu, Yushan; Cheng, Xiao-Qing

2017-12-14

Positive semi-definiteness is a critical property in kernel methods for Support Vector Machine (SVM) by which efficient solutions can be guaranteed through convex quadratic programming. However, a lot of similarity functions in applications do not produce positive semi-definite kernels. We propose projection method by constructing projection matrix on indefinite kernels. As a generalization of the spectrum method (denoising method and flipping method), the projection method shows better or comparable performance comparing to the corresponding indefinite kernel methods on a number of real world data sets. Under the Bregman matrix divergence theory, we can find suggested optimal λ in projection method using unconstrained optimization in kernel learning. In this paper we focus on optimal λ determination, in the pursuit of precise optimal λ determination method in unconstrained optimization framework. We developed a perturbed von-Neumann divergence to measure kernel relationships. We compared optimal λ determination with Logdet Divergence and perturbed von-Neumann Divergence, aiming at finding better λ in projection method. Results on a number of real world data sets show that projection method with optimal λ by Logdet divergence demonstrate near optimal performance. And the perturbed von-Neumann Divergence can help determine a relatively better optimal projection method. Projection method ia easy to use for dealing with indefinite kernels. And the parameter embedded in the method can be determined through unconstrained optimization under Bregman matrix divergence theory. This may provide a new way in kernel SVMs for varied objectives.

Two-dimensional phase unwrapping using robust derivative estimation and adaptive integration.

PubMed

Strand, Jarle; Taxt, Torfinn

2002-01-01

The adaptive integration (ADI) method for two-dimensional (2-D) phase unwrapping is presented. The method uses an algorithm for noise robust estimation of partial derivatives, followed by a noise robust adaptive integration process. The ADI method can easily unwrap phase images with moderate noise levels, and the resulting images are congruent modulo 2pi with the observed, wrapped, input images. In a quantitative evaluation, both the ADI and the BLS methods (Strand et al.) were better than the least-squares methods of Ghiglia and Romero (GR), and of Marroquin and Rivera (MRM). In a qualitative evaluation, the ADI, the BLS, and a conjugate gradient version of the MRM method (MRMCG), were all compared using a synthetic image with shear, using 115 magnetic resonance images, and using 22 fiber-optic interferometry images. For the synthetic image and the interferometry images, the ADI method gave consistently visually better results than the other methods. For the MR images, the MRMCG method was best, and the ADI method second best. The ADI method was less sensitive to the mask definition and the block size than the BLS method, and successfully unwrapped images with shears that were not marked in the masks. The computational requirements of the ADI method for images of nonrectangular objects were comparable to only two iterations of many least-squares-based methods (e.g., GR). We believe the ADI method provides a powerful addition to the ensemble of tools available for 2-D phase unwrapping.

A method for assigning species into groups based on generalized Mahalanobis distance between habitat model coefficients

USGS Publications Warehouse

Williams, C.J.; Heglund, P.J.

2009-01-01

Habitat association models are commonly developed for individual animal species using generalized linear modeling methods such as logistic regression. We considered the issue of grouping species based on their habitat use so that management decisions can be based on sets of species rather than individual species. This research was motivated by a study of western landbirds in northern Idaho forests. The method we examined was to separately fit models to each species and to use a generalized Mahalanobis distance between coefficient vectors to create a distance matrix among species. Clustering methods were used to group species from the distance matrix, and multidimensional scaling methods were used to visualize the relations among species groups. Methods were also discussed for evaluating the sensitivity of the conclusions because of outliers or influential data points. We illustrate these methods with data from the landbird study conducted in northern Idaho. Simulation results are presented to compare the success of this method to alternative methods using Euclidean distance between coefficient vectors and to methods that do not use habitat association models. These simulations demonstrate that our Mahalanobis-distance- based method was nearly always better than Euclidean-distance-based methods or methods not based on habitat association models. The methods used to develop candidate species groups are easily explained to other scientists and resource managers since they mainly rely on classical multivariate statistical methods. ?? 2008 Springer Science+Business Media, LLC.

Analytical difficulties facing today's regulatory laboratories: issues in method validation.

PubMed

MacNeil, James D

2012-08-01

The challenges facing analytical laboratories today are not unlike those faced in the past, although both the degree of complexity and the rate of change have increased. Challenges such as development and maintenance of expertise, maintenance and up-dating of equipment, and the introduction of new test methods have always been familiar themes for analytical laboratories, but international guidelines for laboratories involved in the import and export testing of food require management of such changes in a context which includes quality assurance, accreditation, and method validation considerations. Decisions as to when a change in a method requires re-validation of the method or on the design of a validation scheme for a complex multi-residue method require a well-considered strategy, based on a current knowledge of international guidance documents and regulatory requirements, as well the laboratory's quality system requirements. Validation demonstrates that a method is 'fit for purpose', so the requirement for validation should be assessed in terms of the intended use of a method and, in the case of change or modification of a method, whether that change or modification may affect a previously validated performance characteristic. In general, method validation involves method scope, calibration-related parameters, method precision, and recovery. Any method change which may affect method scope or any performance parameters will require re-validation. Some typical situations involving change in methods are discussed and a decision process proposed for selection of appropriate validation measures. © 2012 John Wiley & Sons, Ltd.

Statistical methods used to test for agreement of medical instruments measuring continuous variables in method comparison studies: a systematic review.

PubMed

Zaki, Rafdzah; Bulgiba, Awang; Ismail, Roshidi; Ismail, Noor Azina

2012-01-01

Accurate values are a must in medicine. An important parameter in determining the quality of a medical instrument is agreement with a gold standard. Various statistical methods have been used to test for agreement. Some of these methods have been shown to be inappropriate. This can result in misleading conclusions about the validity of an instrument. The Bland-Altman method is the most popular method judging by the many citations of the article proposing this method. However, the number of citations does not necessarily mean that this method has been applied in agreement research. No previous study has been conducted to look into this. This is the first systematic review to identify statistical methods used to test for agreement of medical instruments. The proportion of various statistical methods found in this review will also reflect the proportion of medical instruments that have been validated using those particular methods in current clinical practice. Five electronic databases were searched between 2007 and 2009 to look for agreement studies. A total of 3,260 titles were initially identified. Only 412 titles were potentially related, and finally 210 fitted the inclusion criteria. The Bland-Altman method is the most popular method with 178 (85%) studies having used this method, followed by the correlation coefficient (27%) and means comparison (18%). Some of the inappropriate methods highlighted by Altman and Bland since the 1980s are still in use. This study finds that the Bland-Altman method is the most popular method used in agreement research. There are still inappropriate applications of statistical methods in some studies. It is important for a clinician or medical researcher to be aware of this issue because misleading conclusions from inappropriate analyses will jeopardize the quality of the evidence, which in turn will influence quality of care given to patients in the future.

Statistical Methods Used to Test for Agreement of Medical Instruments Measuring Continuous Variables in Method Comparison Studies: A Systematic Review

PubMed Central

Zaki, Rafdzah; Bulgiba, Awang; Ismail, Roshidi; Ismail, Noor Azina

2012-01-01

Background Accurate values are a must in medicine. An important parameter in determining the quality of a medical instrument is agreement with a gold standard. Various statistical methods have been used to test for agreement. Some of these methods have been shown to be inappropriate. This can result in misleading conclusions about the validity of an instrument. The Bland-Altman method is the most popular method judging by the many citations of the article proposing this method. However, the number of citations does not necessarily mean that this method has been applied in agreement research. No previous study has been conducted to look into this. This is the first systematic review to identify statistical methods used to test for agreement of medical instruments. The proportion of various statistical methods found in this review will also reflect the proportion of medical instruments that have been validated using those particular methods in current clinical practice. Methodology/Findings Five electronic databases were searched between 2007 and 2009 to look for agreement studies. A total of 3,260 titles were initially identified. Only 412 titles were potentially related, and finally 210 fitted the inclusion criteria. The Bland-Altman method is the most popular method with 178 (85%) studies having used this method, followed by the correlation coefficient (27%) and means comparison (18%). Some of the inappropriate methods highlighted by Altman and Bland since the 1980s are still in use. Conclusions This study finds that the Bland-Altman method is the most popular method used in agreement research. There are still inappropriate applications of statistical methods in some studies. It is important for a clinician or medical researcher to be aware of this issue because misleading conclusions from inappropriate analyses will jeopardize the quality of the evidence, which in turn will influence quality of care given to patients in the future. PMID:22662248

Evaluation of PDA Technical Report No 33. Statistical Testing Recommendations for a Rapid Microbiological Method Case Study.

PubMed

Murphy, Thomas; Schwedock, Julie; Nguyen, Kham; Mills, Anna; Jones, David

2015-01-01

New recommendations for the validation of rapid microbiological methods have been included in the revised Technical Report 33 release from the PDA. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This case study applies those statistical methods to accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological methods system being evaluated for water bioburden testing. Results presented demonstrate that the statistical methods described in the PDA Technical Report 33 chapter can all be successfully applied to the rapid microbiological method data sets and gave the same interpretation for equivalence to the standard method. The rapid microbiological method was in general able to pass the requirements of PDA Technical Report 33, though the study shows that there can be occasional outlying results and that caution should be used when applying statistical methods to low average colony-forming unit values. Prior to use in a quality-controlled environment, any new method or technology has to be shown to work as designed by the manufacturer for the purpose required. For new rapid microbiological methods that detect and enumerate contaminating microorganisms, additional recommendations have been provided in the revised PDA Technical Report No. 33. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This paper applies those statistical methods to analyze accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological method system being validated for water bioburden testing. The case study demonstrates that the statistical methods described in the PDA Technical Report No. 33 chapter can be successfully applied to rapid microbiological method data sets and give the same comparability results for similarity or difference as the standard method. © PDA, Inc. 2015.

[The research and application of pretreatment method for matrix-assisted laser desorption ionization-time of flight mass spectrometry identification of filamentous fungi].

PubMed

Huang, Y F; Chang, Z; Bai, J; Zhu, M; Zhang, M X; Wang, M; Zhang, G; Li, X Y; Tong, Y G; Wang, J L; Lu, X X

2017-08-08

Objective: To establish and evaluate the feasibility of a pretreatment method for matrix-assisted laser desorption ionization-time of flight mass spectrometry identification of filamentous fungi developed by the laboratory. Methods: Three hundred and eighty strains of filamentous fungi from January 2014 to December 2016 were recovered and cultured on sabouraud dextrose agar (SDA) plate at 28 ℃ to mature state. Meanwhile, the fungi were cultured in liquid sabouraud medium with a vertical rotation method recommended by Bruker and a horizontal vibration method developed by the laboratory until adequate amount of colonies were observed. For the strains cultured with the three methods, protein was extracted with modified magnetic bead-based extraction method for mass spectrum identification. Results: For 380 fungi strains, it took 3-10 d to culture with SDA culture method, and the ratio of identification of the species and genus was 47% and 81%, respectively; it took 5-7 d to culture with vertical rotation method, and the ratio of identification of the species and genus was 76% and 94%, respectively; it took 1-2 d to culture with horizontal vibration method, and the ratio of identification of the species and genus was 96% and 99%, respectively. For the comparison between horizontal vibration method and SDA culture method comparison, the difference was statistically significant (χ(2)=39.026, P <0.01); for the comparison between horizontal vibration method and vertical rotation method recommended by Bruker, the difference was statistically significant(χ(2)=11.310, P <0.01). Conclusion: The horizontal vibration method and modified magnetic bead-based extraction method developed by the laboratory is superior to the method recommended by Bruker and SDA culture method in terms of the identification capacity for filamentous fungi, which can be applied in clinic.

Development of a practical costing method for hospitals.

PubMed

Cao, Pengyu; Toyabe, Shin-Ichi; Akazawa, Kouhei

2006-03-01

To realize an effective cost control, a practical and accurate cost accounting system is indispensable in hospitals. In traditional cost accounting systems, the volume-based costing (VBC) is the most popular cost accounting method. In this method, the indirect costs are allocated to each cost object (services or units of a hospital) using a single indicator named a cost driver (e.g., Labor hours, revenues or the number of patients). However, this method often results in rough and inaccurate results. The activity based costing (ABC) method introduced in the mid 1990s can prove more accurate results. With the ABC method, all events or transactions that cause costs are recognized as "activities", and a specific cost driver is prepared for each activity. Finally, the costs of activities are allocated to cost objects by the corresponding cost driver. However, it is much more complex and costly than other traditional cost accounting methods because the data collection for cost drivers is not always easy. In this study, we developed a simplified ABC (S-ABC) costing method to reduce the workload of ABC costing by reducing the number of cost drivers used in the ABC method. Using the S-ABC method, we estimated the cost of the laboratory tests, and as a result, similarly accurate results were obtained with the ABC method (largest difference was 2.64%). Simultaneously, this new method reduces the seven cost drivers used in the ABC method to four. Moreover, we performed an evaluation using other sample data from physiological laboratory department to certify the effectiveness of this new method. In conclusion, the S-ABC method provides two advantages in comparison to the VBC and ABC methods: (1) it can obtain accurate results, and (2) it is simpler to perform. Once we reduce the number of cost drivers by applying the proposed S-ABC method to the data for the ABC method, we can easily perform the cost accounting using few cost drivers after the second round of costing.

Comparative study between recent methods manipulating ratio spectra and classical methods based on two-wavelength selection for the determination of binary mixture of antazoline hydrochloride and tetryzoline hydrochloride

NASA Astrophysics Data System (ADS)

Abdel-Halim, Lamia M.; Abd-El Rahman, Mohamed K.; Ramadan, Nesrin K.; EL Sanabary, Hoda F. A.; Salem, Maissa Y.

2016-04-01

A comparative study was developed between two classical spectrophotometric methods (dual wavelength method and Vierordt's method) and two recent methods manipulating ratio spectra (ratio difference method and first derivative of ratio spectra method) for simultaneous determination of Antazoline hydrochloride (AN) and Tetryzoline hydrochloride (TZ) in their combined pharmaceutical formulation and in the presence of benzalkonium chloride as a preservative without preliminary separation. The dual wavelength method depends on choosing two wavelengths for each drug in a way so that the difference in absorbance at those two wavelengths is zero for the other drug. While Vierordt's method, is based upon measuring the absorbance and the absorptivity values of the two drugs at their λmax (248.0 and 219.0 nm for AN and TZ, respectively), followed by substitution in the corresponding Vierordt's equation. Recent methods manipulating ratio spectra depend on either measuring the difference in amplitudes of ratio spectra between 255.5 and 269.5 nm for AN and 220.0 and 273.0 nm for TZ in case of ratio difference method or computing first derivative of the ratio spectra for each drug then measuring the peak amplitude at 250.0 nm for AN and at 224.0 nm for TZ in case of first derivative of ratio spectrophotometry. The specificity of the developed methods was investigated by analyzing different laboratory prepared mixtures of the two drugs. All methods were applied successfully for the determination of the selected drugs in their combined dosage form proving that the classical spectrophotometric methods can still be used successfully in analysis of binary mixture using minimal data manipulation rather than recent methods which require relatively more steps. Furthermore, validation of the proposed methods was performed according to ICH guidelines; accuracy, precision and repeatability are found to be within the acceptable limits. Statistical studies showed that the methods can be competitively applied in quality control laboratories.

Lipidomic analysis of biological samples: Comparison of liquid chromatography, supercritical fluid chromatography and direct infusion mass spectrometry methods.

PubMed

Lísa, Miroslav; Cífková, Eva; Khalikova, Maria; Ovčačíková, Magdaléna; Holčapek, Michal

2017-11-24

Lipidomic analysis of biological samples in a clinical research represents challenging task for analytical methods given by the large number of samples and their extreme complexity. In this work, we compare direct infusion (DI) and chromatography - mass spectrometry (MS) lipidomic approaches represented by three analytical methods in terms of comprehensiveness, sample throughput, and validation results for the lipidomic analysis of biological samples represented by tumor tissue, surrounding normal tissue, plasma, and erythrocytes of kidney cancer patients. Methods are compared in one laboratory using the identical analytical protocol to ensure comparable conditions. Ultrahigh-performance liquid chromatography/MS (UHPLC/MS) method in hydrophilic interaction liquid chromatography mode and DI-MS method are used for this comparison as the most widely used methods for the lipidomic analysis together with ultrahigh-performance supercritical fluid chromatography/MS (UHPSFC/MS) method showing promising results in metabolomics analyses. The nontargeted analysis of pooled samples is performed using all tested methods and 610 lipid species within 23 lipid classes are identified. DI method provides the most comprehensive results due to identification of some polar lipid classes, which are not identified by UHPLC and UHPSFC methods. On the other hand, UHPSFC method provides an excellent sensitivity for less polar lipid classes and the highest sample throughput within 10min method time. The sample consumption of DI method is 125 times higher than for other methods, while only 40μL of organic solvent is used for one sample analysis compared to 3.5mL and 4.9mL in case of UHPLC and UHPSFC methods, respectively. Methods are validated for the quantitative lipidomic analysis of plasma samples with one internal standard for each lipid class. Results show applicability of all tested methods for the lipidomic analysis of biological samples depending on the analysis requirements. Copyright © 2017 Elsevier B.V. All rights reserved.

New clinical validation method for automated sphygmomanometer: a proposal by Japan ISO-WG for sphygmomanometer standard.

PubMed

Shirasaki, Osamu; Asou, Yosuke; Takahashi, Yukio

2007-12-01

Owing to fast or stepwise cuff deflation, or measuring at places other than the upper arm, the clinical accuracy of most recent automated sphygmomanometers (auto-BPMs) cannot be validated by one-arm simultaneous comparison, which would be the only accurate validation method based on auscultation. Two main alternative methods are provided by current standards, that is, two-arm simultaneous comparison (method 1) and one-arm sequential comparison (method 2); however, the accuracy of these validation methods might not be sufficient to compensate for the suspicious accuracy in lateral blood pressure (BP) differences (LD) and/or BP variations (BPV) between the device and reference readings. Thus, the Japan ISO-WG for sphygmomanometer standards has been studying a new method that might improve validation accuracy (method 3). The purpose of this study is to determine the appropriateness of method 3 by comparing immunity to LD and BPV with those of the current validation methods (methods 1 and 2). The validation accuracy of the above three methods was assessed in human participants [N=120, 45+/-15.3 years (mean+/-SD)]. An oscillometric automated monitor, Omron HEM-762, was used as the tested device. When compared with the others, methods 1 and 3 showed a smaller intra-individual standard deviation of device error (SD1), suggesting their higher reproducibility of validation. The SD1 by method 2 (P=0.004) significantly correlated with the participant's BP, supporting our hypothesis that the increased SD of device error by method 2 is at least partially caused by essential BPV. Method 3 showed a significantly (P=0.0044) smaller interparticipant SD of device error (SD2), suggesting its higher interparticipant consistency of validation. Among the methods of validation of the clinical accuracy of auto-BPMs, method 3, which showed the highest reproducibility and highest interparticipant consistency, can be proposed as being the most appropriate.

[Significance of bacteria detection with filter paper method on diagnosis of diabetic foot wound infection].

PubMed

Zou, X H; Zhu, Y P; Ren, G Q; Li, G C; Zhang, J; Zou, L J; Feng, Z B; Li, B H

2017-02-20

Objective: To evaluate the significance of bacteria detection with filter paper method on diagnosis of diabetic foot wound infection. Methods: Eighteen patients with diabetic foot ulcer conforming to the study criteria were hospitalized in Liyuan Hospital Affiliated to Tongji Medical College of Huazhong University of Science and Technology from July 2014 to July 2015. Diabetic foot ulcer wounds were classified according to the University of Texas diabetic foot classification (hereinafter referred to as Texas grade) system, and general condition of patients with wounds in different Texas grade was compared. Exudate and tissue of wounds were obtained, and filter paper method and biopsy method were adopted to detect the bacteria of wounds of patients respectively. Filter paper method was regarded as the evaluation method, and biopsy method was regarded as the control method. The relevance, difference, and consistency of the detection results of two methods were tested. Sensitivity, specificity, positive predictive value, negative predictive value, and accuracy of filter paper method in bacteria detection were calculated. Receiver operating characteristic (ROC) curve was drawn based on the specificity and sensitivity of filter paper method in bacteria detection of 18 patients to predict the detection effect of the method. Data were processed with one-way analysis of variance and Fisher's exact test. In patients tested positive for bacteria by biopsy method, the correlation between bacteria number detected by biopsy method and that by filter paper method was analyzed with Pearson correlation analysis. Results: (1) There were no statistically significant differences among patients with wounds in Texas grade 1, 2, and 3 in age, duration of diabetes, duration of wound, wound area, ankle brachial index, glycosylated hemoglobin, fasting blood sugar, blood platelet count, erythrocyte sedimentation rate, C-reactive protein, aspartate aminotransferase, serum creatinine, and urea nitrogen (with F values from 0.029 to 2.916, P values above 0.05), while there were statistically significant differences among patients with wounds in Texas grade 1, 2, and 3 in white blood cell count and alanine aminotransferase (with F values 4.688 and 6.833 respectively, P <0.05 or P <0.01). (2) According to the results of biopsy method, 6 patients were tested negative for bacteria, and 12 patients were tested positive for bacteria, among which 10 patients were with bacterial number above 1×10(5)/g, and 2 patients with bacterial number below 1×10(5)/g. According to the results of filter paper method, 8 patients were tested negative for bacteria, and 10 patients were tested positive for bacteria, among which 7 patients were with bacterial number above 1×10(5)/g, and 3 patients with bacterial number below 1×10(5)/g. There were 7 patients tested positive for bacteria both by biopsy method and filter paper method, 8 patients tested negative for bacteria both by biopsy method and filter paper method, and 3 patients tested positive for bacteria by biopsy method but negative by filter paper method. Patients tested negative for bacteria by biopsy method did not tested positive for bacteria by filter paper method. There was directional association between the detection results of two methods ( P =0.004), i. e. if result of biopsy method was positive, result of filter paper method could also be positive. There was no obvious difference in the detection results of two methods ( P =0.250). The consistency between the detection results of two methods was ordinary (Kappa=0.68, P =0.002). (3) The sensitivity, specificity, positive predictive value, negative predictive value, and accuracy of filter paper method in bacteria detection were 70%, 100%, 1.00, 0.73, and 83.3%, respectively. Total area under ROC curve of bacteria detection by filter paper method in 18 patients was 0.919 (with 95% confidence interval 0-1.000, P =0.030). (4) There were 13 strains of bacteria detected by biopsy method, with 5 strains of Acinetobacter baumannii, 5 strains of Staphylococcus aureus, 1 strain of Pseudomonas aeruginosa, 1 strain of Streptococcus bovis, and 1 strain of bird Enterococcus . There were 11 strains of bacteria detected by filter paper method, with 5 strains of Acinetobacter baumannii, 3 strains of Staphylococcus aureus, 1 strain of Pseudomonas aeruginosa, 1 strain of Streptococcus bovis, and 1 strain of bird Enterococcus . Except for Staphylococcus aureus, the sensitivity and specificity of filter paper method in the detection of the other 4 bacteria were all 100%. The consistency between filter paper method and biopsy method in detecting Acinetobacter baumannii was good (Kappa=1.00, P <0.01), while that in detecting Staphylococcus aureus was ordinary (Kappa=0.68, P <0.05). (5) There was no obvious correlation between the bacteria number of wounds detected by filter paper method and that by biopsy method ( r =0.257, P =0.419). There was obvious correlation between the bacteria numbers detected by two methods in wounds with Texas grade 1 and 2 (with r values as 0.999, P values as 0.001). There was no obvious correlation between the bacteria numbers detected by two methods in wounds with Texas grade 3 ( r =-0.053, P =0.947). Conclusions: The detection result of filter paper method is in accordance with that of biopsy method in the determination of bacterial infection, and it is of great importance in the diagnosis of local infection of diabetic foot wound.

A k-space method for large-scale models of wave propagation in tissue.

PubMed

Mast, T D; Souriau, L P; Liu, D L; Tabei, M; Nachman, A I; Waag, R C

2001-03-01

Large-scale simulation of ultrasonic pulse propagation in inhomogeneous tissue is important for the study of ultrasound-tissue interaction as well as for development of new imaging methods. Typical scales of interest span hundreds of wavelengths; most current two-dimensional methods, such as finite-difference and finite-element methods, are unable to compute propagation on this scale with the efficiency needed for imaging studies. Furthermore, for most available methods of simulating ultrasonic propagation, large-scale, three-dimensional computations of ultrasonic scattering are infeasible. Some of these difficulties have been overcome by previous pseudospectral and k-space methods, which allow substantial portions of the necessary computations to be executed using fast Fourier transforms. This paper presents a simplified derivation of the k-space method for a medium of variable sound speed and density; the derivation clearly shows the relationship of this k-space method to both past k-space methods and pseudospectral methods. In the present method, the spatial differential equations are solved by a simple Fourier transform method, and temporal iteration is performed using a k-t space propagator. The temporal iteration procedure is shown to be exact for homogeneous media, unconditionally stable for "slow" (c(x) < or = c0) media, and highly accurate for general weakly scattering media. The applicability of the k-space method to large-scale soft tissue modeling is shown by simulating two-dimensional propagation of an incident plane wave through several tissue-mimicking cylinders as well as a model chest wall cross section. A three-dimensional implementation of the k-space method is also employed for the example problem of propagation through a tissue-mimicking sphere. Numerical results indicate that the k-space method is accurate for large-scale soft tissue computations with much greater efficiency than that of an analogous leapfrog pseudospectral method or a 2-4 finite difference time-domain method. However, numerical results also indicate that the k-space method is less accurate than the finite-difference method for a high contrast scatterer with bone-like properties, although qualitative results can still be obtained by the k-space method with high efficiency. Possible extensions to the method, including representation of absorption effects, absorbing boundary conditions, elastic-wave propagation, and acoustic nonlinearity, are discussed.

The method of planning the energy consumption for electricity market

NASA Astrophysics Data System (ADS)

Russkov, O. V.; Saradgishvili, S. E.

2017-10-01

The limitations of existing forecast models are defined. The offered method is based on game theory, probabilities theory and forecasting the energy prices relations. New method is the basis for planning the uneven energy consumption of industrial enterprise. Ecological side of the offered method is disclosed. The program module performed the algorithm of the method is described. Positive method tests at the industrial enterprise are shown. The offered method allows optimizing the difference between planned and factual consumption of energy every hour of a day. The conclusion about applicability of the method for addressing economic and ecological challenges is made.

Numerical solution of sixth-order boundary-value problems using Legendre wavelet collocation method

NASA Astrophysics Data System (ADS)

Sohaib, Muhammad; Haq, Sirajul; Mukhtar, Safyan; Khan, Imad

2018-03-01

An efficient method is proposed to approximate sixth order boundary value problems. The proposed method is based on Legendre wavelet in which Legendre polynomial is used. The mechanism of the method is to use collocation points that converts the differential equation into a system of algebraic equations. For validation two test problems are discussed. The results obtained from proposed method are quite accurate, also close to exact solution, and other different methods. The proposed method is computationally more effective and leads to more accurate results as compared to other methods from literature.

Modifications of the PCPT method for HJB equations

NASA Astrophysics Data System (ADS)

Kossaczký, I.; Ehrhardt, M.; Günther, M.

2016-10-01

In this paper we will revisit the modification of the piecewise constant policy timestepping (PCPT) method for solving Hamilton-Jacobi-Bellman (HJB) equations. This modification is called piecewise predicted policy timestepping (PPPT) method and if properly used, it may be significantly faster. We will quickly recapitulate the algorithms of PCPT, PPPT methods and of the classical implicit method and apply them on a passport option pricing problem with non-standard payoff. We will present modifications needed to solve this problem effectively with the PPPT method and compare the performance with the PCPT method and the classical implicit method.

Rapid Method for Sodium Hydroxide/Sodium Peroxide Fusion ...

EPA Pesticide Factsheets

Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Plutonium-238 and plutonium-239 in water and air filters Method Selected for: SAM lists this method as a pre-treatment technique supporting analysis of refractory radioisotopic forms of plutonium in drinking water and air filters using the following qualitative techniques: • Rapid methods for acid or fusion digestion • Rapid Radiochemical Method for Plutonium-238 and Plutonium 239/240 in Building Materials for Environmental Remediation Following Radiological Incidents. Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

The Importance of Method Selection in Determining Product Integrity for Nutrition Research1234

PubMed Central

Mudge, Elizabeth M; Brown, Paula N

2016-01-01

The American Herbal Products Association estimates that there as many as 3000 plant species in commerce. The FDA estimates that there are about 85,000 dietary supplement products in the marketplace. The pace of product innovation far exceeds that of analytical methods development and validation, with new ingredients, matrixes, and combinations resulting in an analytical community that has been unable to keep up. This has led to a lack of validated analytical methods for dietary supplements and to inappropriate method selection where methods do exist. Only after rigorous validation procedures to ensure that methods are fit for purpose should they be used in a routine setting to verify product authenticity and quality. By following systematic procedures and establishing performance requirements for analytical methods before method development and validation, methods can be developed that are both valid and fit for purpose. This review summarizes advances in method selection, development, and validation regarding herbal supplement analysis and provides several documented examples of inappropriate method selection and application. PMID:26980823

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes

PubMed Central

ZAHABIUN, Farzaneh; SADJJADI, Seyed Mahmoud; ESFANDIARI, Farideh

2015-01-01

Background: Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. Methods: A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. Results: The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Conclusion: Using this method is cost effective and fast for mounting of small nematodes comparing to classic method. PMID:26811729

An evaluation of the efficiency of cleaning methods in a bacon factory

PubMed Central

Dempster, J. F.

1971-01-01

The germicidal efficiencies of hot water (140-150° F.) under pressure (method 1), hot water + 2% (w/v) detergent solution (method 2) and hot water + detergent + 200 p.p.m. solution of available chlorine (method 3) were compared at six sites in a bacon factory. Results indicated that sites 1 and 2 (tiled walls) were satisfactorily cleaned by each method. It was therefore considered more economical to clean such surfaces routinely by method 1. However, this method was much less efficient (31% survival of micro-organisms) on site 3 (wooden surface) than methods 2 (7% survival) and 3 (1% survival). Likewise the remaining sites (dehairing machine, black scraper and table) were least efficiently cleaned by method 1. The most satisfactory results were obtained when these surfaces were treated by method 3. Pig carcasses were shown to be contaminated by an improperly cleaned black scraper. Repeated cleaning and sterilizing (method 3) of this equipment reduced the contamination on carcasses from about 70% to less than 10%. PMID:5291745

Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al.

PubMed

Liu, Zhong-Li; Zhang, Xiu-Lu; Cai, Ling-Cang

2015-09-21

A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curve of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.

Simplified adsorption method for detection of antibodies to Candida albicans germ tubes.

PubMed Central

Ponton, J; Quindos, G; Arilla, M C; Mackenzie, D W

1994-01-01

Two modifications that simplify and shorten a method for adsorption of the antibodies against the antigens expressed on both blastospore and germ tube cell wall surfaces (methods 2 and 3) were compared with the original method of adsorption (method 1) to detect anti-Candida albicans germ tube antibodies in 154 serum specimens. Adsorption of the sera by both modified methods resulted in titers very similar to those obtained by the original method. Only 5.2% of serum specimens tested by method 2 and 5.8% of serum specimens tested by method 3 presented greater than one dilution discrepancies in the titers with respect to the titer observed by method 1. When a test based on method 2 was evaluated with sera from patients with invasive candidiasis, the best discriminatory results (sensitivity, 84.6%; specificity, 87.9%; positive predictive value, 75.9%; negative predictive value, 92.7%; efficiency, 86.9%) were obtained when a titer of > or = 1:160 was considered positive. PMID:8126184

A hybrid perturbation Galerkin technique with applications to slender body theory

NASA Technical Reports Server (NTRS)

Geer, James F.; Andersen, Carl M.

1989-01-01

A two-step hybrid perturbation-Galerkin method to solve a variety of applied mathematics problems which involve a small parameter is presented. The method consists of: (1) the use of a regular or singular perturbation method to determine the asymptotic expansion of the solution in terms of the small parameter; (2) construction of an approximate solution in the form of a sum of the perturbation coefficient functions multiplied by (unknown) amplitudes (gauge functions); and (3) the use of the classical Bubnov-Galerkin method to determine these amplitudes. This hybrid method has the potential of overcoming some of the drawbacks of the perturbation method and the Bubnov-Galerkin method when they are applied by themselves, while combining some of the good features of both. The proposed method is applied to some singular perturbation problems in slender body theory. The results obtained from the hybrid method are compared with approximate solutions obtained by other methods, and the degree of applicability of the hybrid method to broader problem areas is discussed.

A hybrid perturbation Galerkin technique with applications to slender body theory

NASA Technical Reports Server (NTRS)

Geer, James F.; Andersen, Carl M.

1987-01-01

A two step hybrid perturbation-Galerkin method to solve a variety of applied mathematics problems which involve a small parameter is presented. The method consists of: (1) the use of a regular or singular perturbation method to determine the asymptotic expansion of the solution in terms of the small parameter; (2) construction of an approximate solution in the form of a sum of the perturbation coefficient functions multiplied by (unknown) amplitudes (gauge functions); and (3) the use of the classical Bubnov-Galerkin method to determine these amplitudes. This hybrid method has the potential of overcoming some of the drawbacks of the perturbation method and the Bubnov-Galerkin method when they are applied by themselves, while combining some of the good features of both. The proposed method is applied to some singular perturbation problems in slender body theory. The results obtained from the hybrid method are compared with approximate solutions obtained by other methods, and the degree of applicability of the hybrid method to broader problem areas is discussed.

Comparison of the convolution quadrature method and enhanced inverse FFT with application in elastodynamic boundary element method

NASA Astrophysics Data System (ADS)

Schanz, Martin; Ye, Wenjing; Xiao, Jinyou

2016-04-01

Transient problems can often be solved with transformation methods, where the inverse transformation is usually performed numerically. Here, the discrete Fourier transform in combination with the exponential window method is compared with the convolution quadrature method formulated as inverse transformation. Both are inverse Laplace transforms, which are formally identical but use different complex frequencies. A numerical study is performed, first with simple convolution integrals and, second, with a boundary element method (BEM) for elastodynamics. Essentially, when combined with the BEM, the discrete Fourier transform needs less frequency calculations, but finer mesh compared to the convolution quadrature method to obtain the same level of accuracy. If further fast methods like the fast multipole method are used to accelerate the boundary element method the convolution quadrature method is better, because the iterative solver needs much less iterations to converge. This is caused by the larger real part of the complex frequencies necessary for the calculation, which improves the conditions of system matrix.

Explicit methods in extended phase space for inseparable Hamiltonian problems

NASA Astrophysics Data System (ADS)

Pihajoki, Pauli

2015-03-01

We present a method for explicit leapfrog integration of inseparable Hamiltonian systems by means of an extended phase space. A suitably defined new Hamiltonian on the extended phase space leads to equations of motion that can be numerically integrated by standard symplectic leapfrog (splitting) methods. When the leapfrog is combined with coordinate mixing transformations, the resulting algorithm shows good long term stability and error behaviour. We extend the method to non-Hamiltonian problems as well, and investigate optimal methods of projecting the extended phase space back to original dimension. Finally, we apply the methods to a Hamiltonian problem of geodesics in a curved space, and a non-Hamiltonian problem of a forced non-linear oscillator. We compare the performance of the methods to a general purpose differential equation solver LSODE, and the implicit midpoint method, a symplectic one-step method. We find the extended phase space methods to compare favorably to both for the Hamiltonian problem, and to the implicit midpoint method in the case of the non-linear oscillator.

Recent Advances in the Method of Forces: Integrated Force Method of Structural Analysis

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.

1998-01-01

Stress that can be induced in an elastic continuum can be determined directly through the simultaneous application of the equilibrium equations and the compatibility conditions. In the literature, this direct stress formulation is referred to as the integrated force method. This method, which uses forces as the primary unknowns, complements the popular equilibrium-based stiffness method, which considers displacements as the unknowns. The integrated force method produces accurate stress, displacement, and frequency results even for modest finite element models. This version of the force method should be developed as an alternative to the stiffness method because the latter method, which has been researched for the past several decades, may have entered its developmental plateau. Stress plays a primary role in the development of aerospace and other products, and its analysis is difficult. Therefore, it is advisable to use both methods to calculate stress and eliminate errors through comparison. This paper examines the role of the integrated force method in analysis, animation and design.

Comparison of gravimetric, creamatocrit and esterified fatty acid methods for determination of total fat content in human milk.

PubMed

Du, Jian; Gay, Melvin C L; Lai, Ching Tat; Trengove, Robert D; Hartmann, Peter E; Geddes, Donna T

2017-02-15

The gravimetric method is considered the gold standard for measuring the fat content of human milk. However, it is labor intensive and requires large volumes of human milk. Other methods, such as creamatocrit and esterified fatty acid assay (EFA), have also been used widely in fat analysis. However, these methods have not been compared concurrently with the gravimetric method. Comparison of the three methods was conducted with human milk of varying fat content. Correlations between these methods were high (r(2)=0.99). Statistical differences (P<0.001) were observed in the overall fat measurements and within each group (low, medium and high fat milk) using the three methods. Overall, stronger correlation with lower mean (4.73g/L) and percentage differences (5.16%) was observed with the creamatocrit than the EFA method when compared to the gravimetric method. Furthermore, the ease of operation and real-time analysis make the creamatocrit method preferable. Copyright © 2016. Published by Elsevier Ltd.

EIT image reconstruction based on a hybrid FE-EFG forward method and the complete-electrode model.

PubMed

Hadinia, M; Jafari, R; Soleimani, M

2016-06-01

This paper presents the application of the hybrid finite element-element free Galerkin (FE-EFG) method for the forward and inverse problems of electrical impedance tomography (EIT). The proposed method is based on the complete electrode model. Finite element (FE) and element-free Galerkin (EFG) methods are accurate numerical techniques. However, the FE technique has meshing task problems and the EFG method is computationally expensive. In this paper, the hybrid FE-EFG method is applied to take both advantages of FE and EFG methods, the complete electrode model of the forward problem is solved, and an iterative regularized Gauss-Newton method is adopted to solve the inverse problem. The proposed method is applied to compute Jacobian in the inverse problem. Utilizing 2D circular homogenous models, the numerical results are validated with analytical and experimental results and the performance of the hybrid FE-EFG method compared with the FE method is illustrated. Results of image reconstruction are presented for a human chest experimental phantom.

Testing Multivariate Adaptive Regression Splines (MARS) as a Method of Land Cover Classification of TERRA-ASTER Satellite Images.

PubMed

Quirós, Elia; Felicísimo, Angel M; Cuartero, Aurora

2009-01-01

This work proposes a new method to classify multi-spectral satellite images based on multivariate adaptive regression splines (MARS) and compares this classification system with the more common parallelepiped and maximum likelihood (ML) methods. We apply the classification methods to the land cover classification of a test zone located in southwestern Spain. The basis of the MARS method and its associated procedures are explained in detail, and the area under the ROC curve (AUC) is compared for the three methods. The results show that the MARS method provides better results than the parallelepiped method in all cases, and it provides better results than the maximum likelihood method in 13 cases out of 17. These results demonstrate that the MARS method can be used in isolation or in combination with other methods to improve the accuracy of soil cover classification. The improvement is statistically significant according to the Wilcoxon signed rank test.

Monitoring the chemical production of citrus-derived bioactive 5-demethylnobiletin using surface enhanced Raman spectroscopy

PubMed Central

Zheng, Jinkai; Fang, Xiang; Cao, Yong; Xiao, Hang; He, Lili

2013-01-01

To develop an accurate and convenient method for monitoring the production of citrus-derived bioactive 5-demethylnobiletin from demethylation reaction of nobiletin, we compared surface enhanced Raman spectroscopy (SERS) methods with a conventional HPLC method. Our results show that both the substrate-based and solution-based SERS methods correlated with HPLC method very well. The solution method produced lower root mean square error of calibration and higher correlation coefficient than the substrate method. The solution method utilized an ‘affinity chromatography’-like procedure to separate the reactant nobiletin from the product 5-demthylnobiletin based on their different binding affinity to the silver dendrites. The substrate method was found simpler and faster to collect the SERS ‘fingerprint’ spectra of the samples as no incubation between samples and silver was needed and only trace amount of samples were required. Our results demonstrated that the SERS methods were superior to HPLC method in conveniently and rapidly characterizing and quantifying 5-demethylnobiletin production. PMID:23885986

Flow “Fine” Synthesis: High Yielding and Selective Organic Synthesis by Flow Methods

PubMed Central

2015-01-01

Abstract The concept of flow “fine” synthesis, that is, high yielding and selective organic synthesis by flow methods, is described. Some examples of flow “fine” synthesis of natural products and APIs are discussed. Flow methods have several advantages over batch methods in terms of environmental compatibility, efficiency, and safety. However, synthesis by flow methods is more difficult than synthesis by batch methods. Indeed, it has been considered that synthesis by flow methods can be applicable for the production of simple gasses but that it is difficult to apply to the synthesis of complex molecules such as natural products and APIs. Therefore, organic synthesis of such complex molecules has been conducted by batch methods. On the other hand, syntheses and reactions that attain high yields and high selectivities by flow methods are increasingly reported. Flow methods are leading candidates for the next generation of manufacturing methods that can mitigate environmental concerns toward sustainable society. PMID:26337828

Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zhong-Li, E-mail: zl.liu@163.com; Zhang, Xiu-Lu; Cai, Ling-Cang

A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curvemore » of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.« less

The Importance of Method Selection in Determining Product Integrity for Nutrition Research.

PubMed

Mudge, Elizabeth M; Betz, Joseph M; Brown, Paula N

2016-03-01

The American Herbal Products Association estimates that there as many as 3000 plant species in commerce. The FDA estimates that there are about 85,000 dietary supplement products in the marketplace. The pace of product innovation far exceeds that of analytical methods development and validation, with new ingredients, matrixes, and combinations resulting in an analytical community that has been unable to keep up. This has led to a lack of validated analytical methods for dietary supplements and to inappropriate method selection where methods do exist. Only after rigorous validation procedures to ensure that methods are fit for purpose should they be used in a routine setting to verify product authenticity and quality. By following systematic procedures and establishing performance requirements for analytical methods before method development and validation, methods can be developed that are both valid and fit for purpose. This review summarizes advances in method selection, development, and validation regarding herbal supplement analysis and provides several documented examples of inappropriate method selection and application. © 2016 American Society for Nutrition.

Student Preferences Regarding Teaching Methods in a Drug-Induced Diseases and Clinical Toxicology Course

PubMed Central

Gim, Suzanna

2013-01-01

Objectives. To determine which teaching method in a drug-induced diseases and clinical toxicology course was preferred by students and whether their preference correlated with their learning of drug-induced diseases. Design. Three teaching methods incorporating active-learning exercises were implemented. A survey instrument was developed to analyze students’ perceptions of the active-learning methods used and how they compared to the traditional teaching method (lecture). Examination performance was then correlated to students’ perceptions of various teaching methods. Assessment. The majority of the 107 students who responded to the survey found traditional lecture significantly more helpful than active-learning methods (p=0.01 for all comparisons). None of the 3 active-learning methods were preferred over the others. No significant correlations were found between students’ survey responses and examination performance. Conclusions. Students preferred traditional lecture to other instructional methods. Learning was not influenced by the teaching method or by preference for a teaching method. PMID:23966726

A new sampling method for fibre length measurement

NASA Astrophysics Data System (ADS)

Wu, Hongyan; Li, Xianghong; Zhang, Junying

2018-06-01

This paper presents a new sampling method for fibre length measurement. This new method can meet the three features of an effective sampling method, also it can produce the beard with two symmetrical ends which can be scanned from the holding line to get two full fibrograms for each sample. The methodology was introduced and experiments were performed to investigate effectiveness of the new method. The results show that the new sampling method is an effective sampling method.

A comparison between progressive extension method (PEM) and iterative method (IM) for magnetic field extrapolations in the solar atmosphere

NASA Technical Reports Server (NTRS)

Wu, S. T.; Sun, M. T.; Sakurai, Takashi

1990-01-01

This paper presents a comparison between two numerical methods for the extrapolation of nonlinear force-free magnetic fields, viz the Iterative Method (IM) and the Progressive Extension Method (PEM). The advantages and disadvantages of these two methods are summarized, and the accuracy and numerical instability are discussed. On the basis of this investigation, it is claimed that the two methods do resemble each other qualitatively.

Adaptive Discontinuous Galerkin Methods in Multiwavelets Bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Archibald, Richard K; Fann, George I; Shelton Jr, William Allison

2011-01-01

We use a multiwavelet basis with the Discontinuous Galerkin (DG) method to produce a multi-scale DG method. We apply this Multiwavelet DG method to convection and convection-diffusion problems in multiple dimensions. Merging the DG method with multiwavelets allows the adaptivity in the DG method to be resolved through manipulation of multiwavelet coefficients rather than grid manipulation. Additionally, the Multiwavelet DG method is tested on non-linear equations in one dimension and on the cubed sphere.

Sensitivity of Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations

DTIC Science & Technology

2016-06-12

Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations Venkatesh Babu, Kumar Kulkarni, Sanjay...buried in soil viz., (1) coupled discrete element & particle gas methods (DEM-PGM) and (2) Arbitrary Lagrangian-Eulerian (ALE), are investigated. The...DEM_PGM and identify the limitations/strengths compared to the ALE method. Discrete Element Method (DEM) can model individual particle directly, and

Two Project Methods: Preliminary Observations on the Similarities and Differences between William Heard Kilpatrick's Project Method and John Dewey's Problem-Solving Method

ERIC Educational Resources Information Center

Sutinen, Ari

2013-01-01

The project method became a famous teaching method when William Heard Kilpatrick published his article "Project Method" in 1918. The key idea in Kilpatrick's project method is to try to explain how pupils learn things when they work in projects toward different common objects. The same idea of pupils learning by work or action in an…

Using an Ordinal Outranking Method Supporting the Acquisition of Military Equipment

DTIC Science & Technology

2009-10-01

will concentrate on the well-known ORESTE method ([10],[12]) which is complementary to the PROMETHEE methods. There are other methods belonging to...the PROMETHEE methods. This MCDM method is taught in the curriculum of the High Staff College for Military Administrators of the Belgian MoD...C(b,a) similar to the preference indicators ( , ) and (b,a)a b  of the PROMETHEE methods (see [4] and SAS-080 14 and SAS-080 15). These

Review of Statistical Methods for Analysing Healthcare Resources and Costs

PubMed Central

Mihaylova, Borislava; Briggs, Andrew; O'Hagan, Anthony; Thompson, Simon G

2011-01-01

We review statistical methods for analysing healthcare resource use and costs, their ability to address skewness, excess zeros, multimodality and heavy right tails, and their ease for general use. We aim to provide guidance on analysing resource use and costs focusing on randomised trials, although methods often have wider applicability. Twelve broad categories of methods were identified: (I) methods based on the normal distribution, (II) methods following transformation of data, (III) single-distribution generalized linear models (GLMs), (IV) parametric models based on skewed distributions outside the GLM family, (V) models based on mixtures of parametric distributions, (VI) two (or multi)-part and Tobit models, (VII) survival methods, (VIII) non-parametric methods, (IX) methods based on truncation or trimming of data, (X) data components models, (XI) methods based on averaging across models, and (XII) Markov chain methods. Based on this review, our recommendations are that, first, simple methods are preferred in large samples where the near-normality of sample means is assured. Second, in somewhat smaller samples, relatively simple methods, able to deal with one or two of above data characteristics, may be preferable but checking sensitivity to assumptions is necessary. Finally, some more complex methods hold promise, but are relatively untried; their implementation requires substantial expertise and they are not currently recommended for wider applied work. Copyright © 2010 John Wiley & Sons, Ltd. PMID:20799344

An adaptive proper orthogonal decomposition method for model order reduction of multi-disc rotor system

NASA Astrophysics Data System (ADS)

Jin, Yulin; Lu, Kuan; Hou, Lei; Chen, Yushu

2017-12-01

The proper orthogonal decomposition (POD) method is a main and efficient tool for order reduction of high-dimensional complex systems in many research fields. However, the robustness problem of this method is always unsolved, although there are some modified POD methods which were proposed to solve this problem. In this paper, a new adaptive POD method called the interpolation Grassmann manifold (IGM) method is proposed to address the weakness of local property of the interpolation tangent-space of Grassmann manifold (ITGM) method in a wider parametric region. This method is demonstrated here by a nonlinear rotor system of 33-degrees of freedom (DOFs) with a pair of liquid-film bearings and a pedestal looseness fault. The motion region of the rotor system is divided into two parts: simple motion region and complex motion region. The adaptive POD method is compared with the ITGM method for the large and small spans of parameter in the two parametric regions to present the advantage of this method and disadvantage of the ITGM method. The comparisons of the responses are applied to verify the accuracy and robustness of the adaptive POD method, as well as the computational efficiency is also analyzed. As a result, the new adaptive POD method has a strong robustness and high computational efficiency and accuracy in a wide scope of parameter.

A hydrostatic weighing method using total lung capacity and a small tank.

PubMed Central

Warner, J G; Yeater, R; Sherwood, L; Weber, K

1986-01-01

The purpose of this study was to establish the validity and reliability of a hydrostatic weighing method using total lung capacity (measuring vital capacity with a respirometer at the time of weighing) the prone position, and a small oblong tank. The validity of the method was established by comparing the TLC prone (tank) method against three hydrostatic weighing methods administered in a pool. The three methods included residual volume seated, TLC seated and TLC prone. Eighty male and female subjects were underwater weighed using each of the four methods. Validity coefficients for per cent body fat between the TLC prone (tank) method and the RV seated (pool), TLC seated (pool) and TLC prone (pool) methods were .98, .99 and .99, respectively. A randomised complete block ANOVA found significant differences between the RV seated (pool) method and each of the three TLC methods with respect to both body density and per cent body fat. The differences were negligible with respect to HW error. Reliability of the TLC prone (tank) method was established by weighing twenty subjects three different times with ten-minute time intervals between testing. Multiple correlations yielded reliability coefficients for body density and per cent body fat values of .99 and .99, respectively. It was concluded that the TLC prone (tank) method is valid, reliable and a favourable method of hydrostatic weighing. PMID:3697596

A hydrostatic weighing method using total lung capacity and a small tank.

PubMed

Warner, J G; Yeater, R; Sherwood, L; Weber, K

1986-03-01

The purpose of this study was to establish the validity and reliability of a hydrostatic weighing method using total lung capacity (measuring vital capacity with a respirometer at the time of weighing) the prone position, and a small oblong tank. The validity of the method was established by comparing the TLC prone (tank) method against three hydrostatic weighing methods administered in a pool. The three methods included residual volume seated, TLC seated and TLC prone. Eighty male and female subjects were underwater weighed using each of the four methods. Validity coefficients for per cent body fat between the TLC prone (tank) method and the RV seated (pool), TLC seated (pool) and TLC prone (pool) methods were .98, .99 and .99, respectively. A randomised complete block ANOVA found significant differences between the RV seated (pool) method and each of the three TLC methods with respect to both body density and per cent body fat. The differences were negligible with respect to HW error. Reliability of the TLC prone (tank) method was established by weighing twenty subjects three different times with ten-minute time intervals between testing. Multiple correlations yielded reliability coefficients for body density and per cent body fat values of .99 and .99, respectively. It was concluded that the TLC prone (tank) method is valid, reliable and a favourable method of hydrostatic weighing.

A work study of the CAD/CAM method and conventional manual method in the fabrication of spinal orthoses for patients with adolescent idiopathic scoliosis.

PubMed

Wong, M S; Cheng, J C Y; Wong, M W; So, S F

2005-04-01

A study was conducted to compare the CAD/CAM method with the conventional manual method in fabrication of spinal orthoses for patients with adolescent idiopathic scoliosis. Ten subjects were recruited for this study. Efficiency analyses of the two methods were performed from cast filling/ digitization process to completion of cast/image rectification. The dimensional changes of the casts/ models rectified by the two cast rectification methods were also investigated. The results demonstrated that the CAD/CAM method was faster than the conventional manual method in the studied processes. The mean rectification time of the CAD/CAM method was shorter than that of the conventional manual method by 108.3 min (63.5%). This indicated that the CAD/CAM method took about 1/3 of the time of the conventional manual to finish cast rectification. In the comparison of cast/image dimensional differences between the conventional manual method and the CAD/CAM method, five major dimensions in each of the five rectified regions namely the axilla, thoracic, lumbar, abdominal and pelvic regions were involved. There were no significant dimensional differences (p < 0.05) in 19 out of the 25 studied dimensions. This study demonstrated that the CAD/CAM system could save the time in the rectification process and offer a relatively high resemblance in cast rectification as compared with the conventional manual method.

An Improved Newton's Method.

ERIC Educational Resources Information Center

Mathews, John H.

1989-01-01

Describes Newton's method to locate roots of an equation using the Newton-Raphson iteration formula. Develops an adaptive method overcoming limitations of the iteration method. Provides the algorithm and computer program of the adaptive Newton-Raphson method. (YP)

Symplectic test particle encounters: a comparison of methods

NASA Astrophysics Data System (ADS)

Wisdom, Jack

2017-01-01

A new symplectic method for handling encounters of test particles with massive bodies is presented. The new method is compared with several popular methods (RMVS3, SYMBA, and MERCURY). The new method compares favourably.

The Tongue and Quill

DTIC Science & Technology

2004-08-01

ethnography , phenomenological study , grounded theory study and content analysis. THE HISTORICAL METHOD Methods I. Qualitative Research Methods ... Phenomenological Study 4. Grounded Theory Study 5. Content Analysis II. Quantitative Research Methods A...A. The Historical Method B. General Qualitative

26 CFR 1.412(c)(1)-2 - Shortfall method.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Shortfall method. 1.412(c)(1)-2 Section 1.412(c... (CONTINUED) INCOME TAXES Pension, Profit-Sharing, Stock Bonus Plans, Etc. § 1.412(c)(1)-2 Shortfall method. (a) In general—(1) Shortfall method. The shortfall method is a funding method that adapts a plan's...

Comparisons of two methods of harvesting biomass for energy

Treesearch

W.F. Watson; B.J. Stokes; I.W. Savelle

1986-01-01

Two harvesting methods for utilization of understory biomass were tested against a conventional harvesting method to determine relative costs. The conventional harvesting method tested removed all pine 6 inches diameter at breast height (DBH) and larger and hardwood sawlogs as tree length logs. The two intensive harvesting methods were a one-pass and a two-pass method...

Log sampling methods and software for stand and landscape analyses.

Treesearch

Lisa J. Bate; Torolf R. Torgersen; Michael J. Wisdom; Edward O. Garton; Shawn C. Clabough

2008-01-01

We describe methods for efficient, accurate sampling of logs at landscape and stand scales to estimate density, total length, cover, volume, and weight. Our methods focus on optimizing the sampling effort by choosing an appropriate sampling method and transect length for specific forest conditions and objectives. Sampling methods include the line-intersect method and...

77 FR 55832 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of a New Equivalent Method

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... Methods: Designation of a New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of a new equivalent method for monitoring ambient air quality. SUMMARY: Notice is... part 53, a new equivalent method for measuring concentrations of PM 2.5 in the ambient air. FOR FURTHER...

26 CFR 1.446-2 - Method of accounting for interest.

Code of Federal Regulations, 2010 CFR

2010-04-01

... account by a taxpayer under the taxpayer's regular method of accounting (e.g., an accrual method or the... 26 Internal Revenue 6 2010-04-01 2010-04-01 false Method of accounting for interest. 1.446-2... TAX (CONTINUED) INCOME TAXES Methods of Accounting § 1.446-2 Method of accounting for interest. (a...

Rapid Radiochemical Method for Radium-226 in Building ...

EPA Pesticide Factsheets

Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Radium-226 in building materials Method Selected for: SAM lists this method for qualitative analysis of radium-226 in concrete or brick building materials Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

Rapid Radiochemical Method for Americium-241 in Building ...

EPA Pesticide Factsheets

Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Americium-241 in building materials Method Selected for: SAM lists this method for qualitative analysis of americium-241 in concrete or brick building materials. Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

Draft Environmental Impact Statement: Peacekeeper Rail Garrison Program

DTIC Science & Technology

1988-06-01

2-13 3.0 ENVIRONMENTAL ANALYSIS METHODS ................................ 3-1 3.1 Methods for Assessing Nationwide Impacts...3-2 3.1.1 Methods for Assessing National Economic Impacts ........... 3-2 3.1.2 Methods for Assessing Railroad Network...3.2.4 Methods for Assessing Existing and Future Baseline Conditions .......................................... 3-6 3.2.5 Methods for Assessing

A Comparative Investigation of the Efficiency of Two Classroom Observational Methods.

ERIC Educational Resources Information Center

Kissel, Mary Ann

The problem of this study was to determine whether Method A is a more efficient observational method for obtaining activity type behaviors in an individualized classroom than Method B. Method A requires the observer to record the activities of the entire class at given intervals while Method B requires only the activities of selected individuals…

Improved methods of vibration analysis of pretwisted, airfoil blades

NASA Technical Reports Server (NTRS)

Subrahmanyam, K. B.; Kaza, K. R. V.

1984-01-01

Vibration analysis of pretwisted blades of asymmetric airfoil cross section is performed by using two mixed variational approaches. Numerical results obtained from these two methods are compared to those obtained from an improved finite difference method and also to those given by the ordinary finite difference method. The relative merits, convergence properties and accuracies of all four methods are studied and discussed. The effects of asymmetry and pretwist on natural frequencies and mode shapes are investigated. The improved finite difference method is shown to be far superior to the conventional finite difference method in several respects. Close lower bound solutions are provided by the improved finite difference method for untwisted blades with a relatively coarse mesh while the mixed methods have not indicated any specific bound.

An Improved Azimuth Angle Estimation Method with a Single Acoustic Vector Sensor Based on an Active Sonar Detection System.

PubMed

Zhao, Anbang; Ma, Lin; Ma, Xuefei; Hui, Juan

2017-02-20

In this paper, an improved azimuth angle estimation method with a single acoustic vector sensor (AVS) is proposed based on matched filtering theory. The proposed method is mainly applied in an active sonar detection system. According to the conventional passive method based on complex acoustic intensity measurement, the mathematical and physical model of this proposed method is described in detail. The computer simulation and lake experiments results indicate that this method can realize the azimuth angle estimation with high precision by using only a single AVS. Compared with the conventional method, the proposed method achieves better estimation performance. Moreover, the proposed method does not require complex operations in frequencydomain and achieves computational complexity reduction.

Comparison of Instream and Laboratory Methods of Measuring Sediment Oxygen Demand

USGS Publications Warehouse

Hall, Dennis C.; Berkas, Wayne R.

1988-01-01

Sediment oxygen demand (SOD) was determined at three sites in a gravel-bottomed central Missouri stream by: (1) two variations of an instream method, and (2) a laboratory method. SOD generally was greatest by the instream methods, which are considered more accurate, and least by the laboratory method. Disturbing stream sediment did not significantly decrease SOD by the instream method. Temperature ranges of up to 12 degree Celsius had no significant effect on the SOD. In the gravel-bottomed stream, the placement of chambers was critical to obtain reliable measurements. SOD rates were dependent on the method; therefore, care should be taken in comparing SOD data obtained by different methods. There is a need for a carefully researched standardized method for SOD determinations.

Echo movement and evolution from real-time processing.

NASA Technical Reports Server (NTRS)

Schaffner, M. R.

1972-01-01

Preliminary experimental data on the effectiveness of conventional radars in measuring the movement and evolution of meteorological echoes when the radar is connected to a programmable real-time processor are examined. In the processor programming is accomplished by conceiving abstract machines which constitute the actual programs used in the methods employed. An analysis of these methods, such as the center of gravity method, the contour-displacement method, the method of slope, the cross-section method, the contour crosscorrelation method, the method of echo evolution at each point, and three-dimensional measurements, shows that the motions deduced from them may differ notably (since each method determines different quantities) but the plurality of measurement may give additional information on the characteristics of the precipitation.

Comparison of methods for measuring cholinesterase inhibition by carbamates

PubMed Central

Wilhelm, K.; Vandekar, M.; Reiner, E.

1973-01-01

The Acholest and tintometric methods are used widely for measuring blood cholinesterase activity after exposure to organophosphorus compounds. However, if applied for measuring blood cholinesterase activity in persons exposed to carbamates, the accuracy of the methods requires verification since carbamylated cholinesterases are unstable. The spectrophotometric method was used as a reference method and the two field methods were employed under controlled conditions. Human blood cholinesterases were inhibited in vitro by four methylcarbamates that are used as insecticides. When plasma cholinesterase activity was measured by the Acholest and spectrophotometric methods, no difference was found. The enzyme activity in whole blood determined by the tintometric method was ≤ 11% higher than when the same sample was measured by the spectrophotometric method. PMID:4541147

An advanced probabilistic structural analysis method for implicit performance functions

NASA Technical Reports Server (NTRS)

Wu, Y.-T.; Millwater, H. R.; Cruse, T. A.

1989-01-01

In probabilistic structural analysis, the performance or response functions usually are implicitly defined and must be solved by numerical analysis methods such as finite element methods. In such cases, the most commonly used probabilistic analysis tool is the mean-based, second-moment method which provides only the first two statistical moments. This paper presents a generalized advanced mean value (AMV) method which is capable of establishing the distributions to provide additional information for reliability design. The method requires slightly more computations than the second-moment method but is highly efficient relative to the other alternative methods. In particular, the examples show that the AMV method can be used to solve problems involving non-monotonic functions that result in truncated distributions.

Formal methods technology transfer: Some lessons learned

NASA Technical Reports Server (NTRS)

Hamilton, David

1992-01-01

IBM has a long history in the application of formal methods to software development and verification. There have been many successes in the development of methods, tools and training to support formal methods. And formal methods have been very successful on several projects. However, the use of formal methods has not been as widespread as hoped. This presentation summarizes several approaches that have been taken to encourage more widespread use of formal methods, and discusses the results so far. The basic problem is one of technology transfer, which is a very difficult problem. It is even more difficult for formal methods. General problems of technology transfer, especially the transfer of formal methods technology, are also discussed. Finally, some prospects for the future are mentioned.

Method Development in Forensic Toxicology.

PubMed

Peters, Frank T; Wissenbach, Dirk K; Busardo, Francesco Paolo; Marchei, Emilia; Pichini, Simona

2017-01-01

In the field of forensic toxicology, the quality of analytical methods is of great importance to ensure the reliability of results and to avoid unjustified legal consequences. A key to high quality analytical methods is a thorough method development. The presented article will provide an overview on the process of developing methods for forensic applications. This includes the definition of the method's purpose (e.g. qualitative vs quantitative) and the analytes to be included, choosing an appropriate sample matrix, setting up separation and detection systems as well as establishing a versatile sample preparation. Method development is concluded by an optimization process after which the new method is subject to method validation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Implementation of Leak Test Methods for the International Space Station (ISS) Elements, Systems and Components

NASA Technical Reports Server (NTRS)

Underwood, Steve; Lvovsky, Oleg

2007-01-01

The International Space Station (ISS has Qualification and Acceptance Environmental Test Requirements document, SSP 41172 that includes many environmental tests such as Thermal vacuum & Cycling, Depress/Repress, Sinusoidal, Random, and Acoustic Vibration, Pyro Shock, Acceleration, Humidity, Pressure, Electromatic Interference (EMI)/Electromagnetic Compatibility (EMCO), etc. This document also includes (13) leak test methods for Pressure Integrity Verification of the ISS Elements, Systems, and Components. These leak test methods are well known, however, the test procedure for specific leak test method shall be written and implemented paying attention to the important procedural steps/details that, if omitted or deviated, could impact the quality of the final product and affect the crew safety. Such procedural steps/details for different methods include, but not limited to: - Sequence of testing, f or example, pressurization and submersion steps for Method I (Immersion); - Stabilization of the mass spectrometer leak detector outputs fo r Method II (vacuum Chamber or Bell jar); - Proper data processing an d taking a conservative approach while making predictions for on-orbit leakage rate for Method III(Pressure Change); - Proper Calibration o f the mass spectrometer leak detector for all the tracer gas (mostly Helium) Methods such as Method V (Detector Probe), Method VI (Hood), Method VII (Tracer Probe), Method VIII(Accumulation); - Usage of visibl ility aides for Method I (Immersion), Method IV (Chemical Indicator), Method XII (Foam/Liquid Application), and Method XIII (Hydrostatic/Visual Inspection); While some methods could be used for the total leaka ge (either internal-to-external or external-to-internal) rate requirement verification (Vacuum Chamber, Pressure Decay, Hood, Accumulation), other methods shall be used only as a pass/fail test for individual joints (e.g., welds, fittings, and plugs) or for troubleshooting purposes (Chemical Indicator, Detector Probe, Tracer Probe, Local Vacuum Chamber, Foam/Liquid Application, and Hydrostatic/Visual Inspection). Any isolation of SSP 41172 requirements have led to either retesting of hardware or accepting a risk associated with the potential system or component pressure integrity problem during flight.

Temperature profiles of different cooling methods in porcine pancreas procurement.

PubMed

Weegman, Bradley P; Suszynski, Thomas M; Scott, William E; Ferrer Fábrega, Joana; Avgoustiniatos, Efstathios S; Anazawa, Takayuki; O'Brien, Timothy D; Rizzari, Michael D; Karatzas, Theodore; Jie, Tun; Sutherland, David E R; Hering, Bernhard J; Papas, Klearchos K

2014-01-01

Porcine islet xenotransplantation is a promising alternative to human islet allotransplantation. Porcine pancreas cooling needs to be optimized to reduce the warm ischemia time (WIT) following donation after cardiac death, which is associated with poorer islet isolation outcomes. This study examines the effect of four different cooling Methods on core porcine pancreas temperature (n = 24) and histopathology (n = 16). All Methods involved surface cooling with crushed ice and chilled irrigation. Method A, which is the standard for porcine pancreas procurement, used only surface cooling. Method B involved an intravascular flush with cold solution through the pancreas arterial system. Method C involved an intraductal infusion with cold solution through the major pancreatic duct, and Method D combined all three cooling Methods. Surface cooling alone (Method A) gradually decreased core pancreas temperature to <10 °C after 30 min. Using an intravascular flush (Method B) improved cooling during the entire duration of procurement, but incorporating an intraductal infusion (Method C) rapidly reduced core temperature 15-20 °C within the first 2 min of cooling. Combining all methods (Method D) was the most effective at rapidly reducing temperature and providing sustained cooling throughout the duration of procurement, although the recorded WIT was not different between Methods (P = 0.36). Histological scores were different between the cooling Methods (P = 0.02) and the worst with Method A. There were differences in histological scores between Methods A and C (P = 0.02) and Methods A and D (P = 0.02), but not between Methods C and D (P = 0.95), which may highlight the importance of early cooling using an intraductal infusion. In conclusion, surface cooling alone cannot rapidly cool large (porcine or human) pancreata. Additional cooling with an intravascular flush and intraductal infusion results in improved core porcine pancreas temperature profiles during procurement and histopathology scores. These data may also have implications on human pancreas procurement as use of an intraductal infusion is not common practice. © 2014 John Wiley & Sons A/S Published by John Wiley & Sons Ltd.

The PneuCarriage Project: A Multi-Centre Comparative Study to Identify the Best Serotyping Methods for Examining Pneumococcal Carriage in Vaccine Evaluation Studies

PubMed Central

Satzke, Catherine; Dunne, Eileen M.; Porter, Barbara D.; Klugman, Keith P.; Mulholland, E. Kim

2015-01-01

Background The pneumococcus is a diverse pathogen whose primary niche is the nasopharynx. Over 90 different serotypes exist, and nasopharyngeal carriage of multiple serotypes is common. Understanding pneumococcal carriage is essential for evaluating the impact of pneumococcal vaccines. Traditional serotyping methods are cumbersome and insufficient for detecting multiple serotype carriage, and there are few data comparing the new methods that have been developed over the past decade. We established the PneuCarriage project, a large, international multi-centre study dedicated to the identification of the best pneumococcal serotyping methods for carriage studies. Methods and Findings Reference sample sets were distributed to 15 research groups for blinded testing. Twenty pneumococcal serotyping methods were used to test 81 laboratory-prepared (spiked) samples. The five top-performing methods were used to test 260 nasopharyngeal (field) samples collected from children in six high-burden countries. Sensitivity and positive predictive value (PPV) were determined for the test methods and the reference method (traditional serotyping of >100 colonies from each sample). For the alternate serotyping methods, the overall sensitivity ranged from 1% to 99% (reference method 98%), and PPV from 8% to 100% (reference method 100%), when testing the spiked samples. Fifteen methods had ≥70% sensitivity to detect the dominant (major) serotype, whilst only eight methods had ≥70% sensitivity to detect minor serotypes. For the field samples, the overall sensitivity ranged from 74.2% to 95.8% (reference method 93.8%), and PPV from 82.2% to 96.4% (reference method 99.6%). The microarray had the highest sensitivity (95.8%) and high PPV (93.7%). The major limitation of this study is that not all of the available alternative serotyping methods were included. Conclusions Most methods were able to detect the dominant serotype in a sample, but many performed poorly in detecting the minor serotype populations. Microarray with a culture amplification step was the top-performing method. Results from this comprehensive evaluation will inform future vaccine evaluation and impact studies, particularly in low-income settings, where pneumococcal disease burden remains high. PMID:26575033

[The clinical value of sentinel lymph node detection in laryngeal and hypopharyngeal carcinoma patients with clinically negative neck by methylene blue method and radiolabeled tracer method].

PubMed

Zhao, Xin; Xiao, Dajiang; Ni, Jianming; Zhu, Guochen; Yuan, Yuan; Xu, Ting; Zhang, Yongsheng

2014-11-01

To investigate the clinical value of sentinel lymph node (SLN) detection in laryngeal and hypopharyngeal carcinoma patients with clinically negative neck (cN0) by methylene blue method, radiolabeled tracer method and combination of these two methods. Thirty-three patients with cN0 laryngeal carcinoma and six patients with cN0 hypopharyngeal carcinoma underwent SLN detection using both of methylene blue and radiolabeled tracer method. All these patients were accepted received the injection of radioactive isotope 99 Tc(m)-sulfur colloid (SC) and methylene blue into the carcinoma before surgery, then all these patients underwent intraopertive lymphatic mapping with a handheld gamma-detecting probe and blue-dyed SLN. After the mapping of SLN, selected neck dissections and tumor resections were peformed. The results of SLN detection by radiolabeled tracer, dye and combination of both methods were compared. The detection rate of SLN by radiolabeled tracer, methylene blue and combined method were 89.7%, 79.5%, 92.3% respectively. The number of detected SLN was significantly different between radiolabeled tracer method and combined method, and also between methylene blue method and combined method. The detection rate of methylene blue and radiolabeled tracer method were significantly different from combined method (P < 0.05). Nine patients were found to have lymph node metastasis by final pathological examination. The accuracy and negative rate of SLN detection of the combined method were 97.2% and 11.1%. The combined method using radiolabeled tracer and methylene blue can improve the detection rate and accuracy of sentinel lymph node detection. Furthermore, sentinel lymph node detection can accurately represent the cervical lymph node status in cN0 laryngeal and hypopharyngeal carcinoma.

Slump sitting X-ray of the lumbar spine is superior to the conventional flexion view in assessing lumbar spine instability.

PubMed

Hey, Hwee Weng Dennis; Lau, Eugene Tze-Chun; Lim, Joel-Louis; Choong, Denise Ai-Wen; Tan, Chuen-Seng; Liu, Gabriel Ka-Po; Wong, Hee-Kit

2017-03-01

Flexion radiographs have been used to identify cases of spinal instability. However, current methods are not standardized and are not sufficiently sensitive or specific to identify instability. This study aimed to introduce a new slump sitting method for performing lumbar spine flexion radiographs and comparison of the angular range of motions (ROMs) and displacements between the conventional method and this new method. This study used is a prospective study on radiological evaluation of the lumbar spine flexion ROMs and displacements using dynamic radiographs. Sixty patients were recruited from a single spine tertiary center. Angular and displacement measurements of lumbar spine flexion were carried out. Participants were randomly allocated into two groups: those who did the new method first, followed by the conventional method versus those who did the conventional method first, followed by the new method. A comparison of the angular and displacement measurements of lumbar spine flexion between the conventional method and the new method was performed and tested for superiority and non-inferiority. The measurements of global lumbar angular ROM were, on average, 17.3° larger (p<.0001) using the new slump sitting method compared with the conventional method. They were most significant at the levels of L3-L4, L4-L5, and L5-S1 (p<.0001, p<.0001 and p=.001, respectively). There was no significant difference between both methods when measuring lumbar displacements (p=.814). The new method of slump sitting dynamic radiograph was shown to be superior to the conventional method in measuring the angular ROM and non-inferior to the conventional method in the measurement of displacement. Copyright © 2016 Elsevier Inc. All rights reserved.

Searching for transcription factor binding sites in vector spaces

PubMed Central

2012-01-01

Background Computational approaches to transcription factor binding site identification have been actively researched in the past decade. Learning from known binding sites, new binding sites of a transcription factor in unannotated sequences can be identified. A number of search methods have been introduced over the years. However, one can rarely find one single method that performs the best on all the transcription factors. Instead, to identify the best method for a particular transcription factor, one usually has to compare a handful of methods. Hence, it is highly desirable for a method to perform automatic optimization for individual transcription factors. Results We proposed to search for transcription factor binding sites in vector spaces. This framework allows us to identify the best method for each individual transcription factor. We further introduced two novel methods, the negative-to-positive vector (NPV) and optimal discriminating vector (ODV) methods, to construct query vectors to search for binding sites in vector spaces. Extensive cross-validation experiments showed that the proposed methods significantly outperformed the ungapped likelihood under positional background method, a state-of-the-art method, and the widely-used position-specific scoring matrix method. We further demonstrated that motif subtypes of a TF can be readily identified in this framework and two variants called the k NPV and k ODV methods benefited significantly from motif subtype identification. Finally, independent validation on ChIP-seq data showed that the ODV and NPV methods significantly outperformed the other compared methods. Conclusions We conclude that the proposed framework is highly flexible. It enables the two novel methods to automatically identify a TF-specific subspace to search for binding sites. Implementations are available as source code at: http://biogrid.engr.uconn.edu/tfbs_search/. PMID:23244338

[Social aspects of natural methods (author's transl)].

PubMed

Linhard, J

1981-01-01

It is rather difficult to distinguish between "natural methods" and "no natural methods" or "unnatural methods". "Natural methods" should therefore be defined as those which are used without any additional product. Use and success depend on the motivation and control of the couple. These methods are: postcoital douching, prolonged lactation, rhythm method according to Knaus or to Ogino by observing BBT, observation of cervical mucus according to Billings, coitus interruptus, and coitus reservatus. As far as we know, these methods have been used since primeval times and have been commented on during different periods and at different places as being used with the support of all 3 monotheistic religions until the era of Augustinus and Thomas of Aquinas. From then on the Christian and later on the Catholic faith saw human production as the purpose of matrimony and therefore banned all methods with the exception of the rhythm method. It has been assumed that the decrease of fertility in Europe since the industrial revolution was a result of using these methods--primarily coitus interruptus, which still seems to be widely spread. It is therefore unintelligible why so little is known about the impact of these methods on the medical and social sector. As long as the ideal method is not available the natural methods should be given a place in the development of a contraceptive methodology. Since the natural methods do not cost anything, they could help to carry forward family planning in countries with low-income population. But before employing them for the purpose they have to be studied in view of their medicobiological as well as their social aspects in order to learn more about these old and much used methods. (Author's)

Evaluation of selected methods for determining streamflow during periods of ice effect

USGS Publications Warehouse

Melcher, Norwood B.; Walker, J.F.

1992-01-01

Seventeen methods for estimating ice-affected streamflow are evaluated for potential use with the U.S. Geological Survey streamflow-gaging station network. The methods evaluated were identified by written responses from U.S. Geological Survey field offices and by a comprehensive literature search. The methods selected and techniques used for applying the methods are described in this report. The methods are evaluated by comparing estimated results with data collected at three streamflow-gaging stations in Iowa during the winter of 1987-88. Discharge measurements were obtained at 1- to 5-day intervals during the ice-affected periods at the three stations to define an accurate baseline record. Discharge records were compiled for each method based on data available, assuming a 6-week field schedule. The methods are classified into two general categories-subjective and analytical--depending on whether individual judgment is necessary for method application. On the basis of results of the evaluation for the three Iowa stations, two of the subjective methods (discharge ratio and hydrographic-and-climatic comparison) were more accurate than the other subjective methods and approximately as accurate as the best analytical method. Three of the analytical methods (index velocity, adjusted rating curve, and uniform flow) could potentially be used at streamflow-gaging stations, where the need for accurate ice-affected discharge estimates justifies the expense of collecting additional field data. One analytical method (ice-adjustment factor) may be appropriate for use at stations with extremely stable stage-discharge ratings and measuring sections. Further research is needed to refine the analytical methods. The discharge-ratio and multiple-regression methods produce estimates of streamflow for varying ice conditions using information obtained from the existing U.S. Geological Survey streamflow-gaging network.

Fatigue properties of JIS H3300 C1220 copper for strain life prediction

NASA Astrophysics Data System (ADS)

Harun, Muhammad Faiz; Mohammad, Roslina

2018-05-01

The existing methods for estimating strain life parameters are dependent on the material's monotonic tensile properties. However, a few of these methods yield quite complicated expressions for calculating fatigue parameters, and are specific to certain groups of materials only. The Universal Slopes method, Modified Universal Slopes method, Uniform Material Law, the Hardness method, and Medians method are a few existing methods for predicting strain-life fatigue based on monotonic tensile material properties and hardness of material. In the present study, nine methods for estimating fatigue life and properties are applied on JIS H3300 C1220 copper to determine the best methods for strain life estimation of this ductile material. Experimental strain-life curves are compared to estimations obtained using each method. Muralidharan-Manson's Modified Universal Slopes method and Bäumel-Seeger's method for unalloyed and low-alloy steels are found to yield batter accuracy in estimating fatigue life with a deviation of less than 25%. However, the prediction of both methods only yield much better accuracy for a cycle of less than 1000 or for strain amplitudes of more than 1% and less than 6%. Manson's Original Universal Slopes method and Ong's Modified Four-Point Correlation method are found to predict the strain-life fatigue of copper with better accuracy for a high number of cycles of strain amplitudes of less than 1%. The differences between mechanical behavior during monotonic and cyclic loading and the complexity in deciding the coefficient in an equation are probably the reason for the lack of a reliable method for estimating fatigue behavior using the monotonic properties of a group of materials. It is therefore suggested that a differential approach and new expressions be developed to estimate the strain-life fatigue parameters for ductile materials such as copper.

Innovative application of the moisture analyzer for determination of dry mass content of processed cheese

NASA Astrophysics Data System (ADS)

Kowalska, Małgorzata; Janas, Sławomir; Woźniak, Magdalena

2018-04-01

The aim of this work was the presentation of an alternative method of determination of the total dry mass content in processed cheese. The authors claim that the presented method can be used in industry's quality control laboratories for routine testing and for quick in-process control. For the test purposes both reference method of determination of dry mass in processed cheese and moisture analyzer method were used. The tests were carried out for three different kinds of processed cheese. In accordance with the reference method, the sample was placed on a layer of silica sand and dried at the temperature of 102 °C for about 4 h. The moisture analyzer test required method validation, with regard to drying temperature range and mass of the analyzed sample. Optimum drying temperature of 110 °C was determined experimentally. For Hochland cream processed cheese sample, the total dry mass content, obtained using the reference method, was 38.92%, whereas using the moisture analyzer method, it was 38.74%. An average analysis time in case of the moisture analyzer method was 9 min. For the sample of processed cheese with tomatoes, the reference method result was 40.37%, and the alternative method result was 40.67%. For the sample of cream processed cheese with garlic the reference method gave value of 36.88%, and the alternative method, of 37.02%. An average time of those determinations was 16 min. Obtained results confirmed that use of moisture analyzer is effective. Compliant values of dry mass content were obtained for both of the used methods. According to the authors, the fact that the measurement took incomparably less time for moisture analyzer method, is a key criterion of in-process control and final quality control method selection.

Alternative microbial methods: An overview and selection criteria.

PubMed

Jasson, Vicky; Jacxsens, Liesbeth; Luning, Pieternel; Rajkovic, Andreja; Uyttendaele, Mieke

2010-09-01

This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant bibliography. Perspectives on future development and the potential of the rapid method for routine application in food diagnostics are discussed. As various alternative "rapid" methods in different formats are available on the market, it can be very difficult for a food business operator or for a control authority to select the most appropriate method which fits its purpose. Validation of a method by a third party, according to international accepted protocol based upon ISO 16140, may increase the confidence in the performance of a method. A list of at the moment validated methods for enumeration of both utility indicators (aerobic plate count) and hygiene indicators (Enterobacteriaceae, Escherichia coli, coagulase positive Staphylococcus) as well as for detection of the four major pathogens (Salmonella spp., Listeria monocytogenes, E. coli O157 and Campylobacter spp.) is included with reference to relevant websites to check for updates. In a second part of this study, selection criteria are introduced to underpin the choice of the appropriate method(s) for a defined application. The selection criteria link the definition of the context in which the user of the method functions - and thus the prospective use of the microbial test results - with the technical information on the method and its operational requirements and sustainability. The selection criteria can help the end user of the method to obtain a systematic insight into all relevant factors to be taken into account for selection of a method for microbial analysis. Copyright 2010 Elsevier Ltd. All rights reserved.

Study on ABO and RhD blood grouping: Comparison between conventional tile method and a new solid phase method (InTec Blood Grouping Test Kit).

PubMed

Yousuf, R; Abdul Ghani, S A; Abdul Khalid, N; Leong, C F

2018-04-01

'InTec Blood Grouping Test kit' using solid-phase technology is a new method which may be used at outdoor blood donation site or at bed side as an alternative to the conventional tile method in view of its stability at room temperature and fulfilled the criteria as point of care test. This study aimed to compare the efficiency of this solid phase method (InTec Blood Grouping Test Kit) with the conventional tile method in determining the ABO and RhD blood group of healthy donors. A total of 760 voluntary donors who attended the Blood Bank, Penang Hospital or offsite blood donation campaigns from April to May 2014 were recruited. The ABO and RhD blood groups were determined by the conventional tile method and the solid phase method, in which the tube method was used as the gold standard. For ABO blood grouping, the tile method has shown 100% concordance results with the gold standard tube method, whereas the solid-phase method only showed concordance result for 754/760 samples (99.2%). Therefore, for ABO grouping, tile method has 100% sensitivity and specificity while the solid phase method has slightly lower sensitivity of 97.7% but both with good specificity of 100%. For RhD grouping, both the tile and solid phase methods have grouped one RhD positive specimen as negative each, thus giving the sensitivity and specificity of 99.9% and 100% for both methods respectively. The 'InTec Blood Grouping Test Kit' is suitable for offsite usage because of its simplicity and user friendliness. However, further improvement in adding the internal quality control may increase the test sensitivity and validity of the test results.

Knowledge, beliefs and use of nursing methods in preventing pressure sores in Dutch hospitals.

PubMed

Halfens, R J; Eggink, M

1995-02-01

Different methods have been developed in the past to prevent patients from developing pressure sores. The consensus guidelines developed in the Netherlands make a distinction between preventive methods useful for all patients, methods useful only in individual cases, and methods which are not useful at all. This study explores the extent of use of the different methods within Dutch hospitals, and the knowledge and beliefs of nurses regarding the usefulness of these methods. A mail questionnaire was sent to a representative sample of nurses working within Dutch hospitals. A total of 373 questionnaires were returned and used for the analyses. The results showed that many methods judged by the consensus report as not useful, or only useful in individual cases, are still being used. Some methods which are judged as useful, like the use of a risk assessment scale, are used on only a few wards. The opinion of nurses regarding the usefulness of the methods differ from the guidelines of the consensus committee. Although there is agreement about most of the useful methods, there is less agreement about the methods which are useful in individual cases or methods which are not useful at all. In particular the use of massage and cream are, in the opinion of the nurses, useful in individual or in all cases.

Automatic allograft bone selection through band registration and its application to distal femur.

PubMed

Zhang, Yu; Qiu, Lei; Li, Fengzan; Zhang, Qing; Zhang, Li; Niu, Xiaohui

2017-09-01

Clinical reports suggest that large bone defects could be effectively restored by allograft bone transplantation, where allograft bone selection acts an important role. Besides, there is a huge demand for developing the automatic allograft bone selection methods, as the automatic methods could greatly improve the management efficiency of the large bone banks. Although several automatic methods have been presented to select the most suitable allograft bone from the massive allograft bone bank, these methods still suffer from inaccuracy. In this paper, we propose an effective allograft bone selection method without using the contralateral bones. Firstly, the allograft bone is globally aligned to the recipient bone by surface registration. Then, the global alignment is further refined through band registration. The band, defined as the recipient points within the lifted and lowered cutting planes, could involve more local structure of the defected segment. Therefore, our method could achieve robust alignment and high registration accuracy of the allograft and recipient. Moreover, the existing contour method and surface method could be unified into one framework under our method by adjusting the lift and lower distances of the cutting planes. Finally, our method has been validated on the database of distal femurs. The experimental results indicate that our method outperforms the surface method and contour method.

Validation of a questionnaire method for estimating extent of menstrual blood loss in young adult women.

PubMed

Heath, A L; Skeaff, C M; Gibson, R S

1999-04-01

The objective of this study was to validate two indirect methods for estimating the extent of menstrual blood loss against a reference method to determine which method would be most appropriate for use in a population of young adult women. Thirty-two women aged 18 to 29 years (mean +/- SD; 22.4 +/- 2.8) were recruited by poster in Dunedin (New Zealand). Data are presented for 29 women. A recall method and a record method for estimating extent of menstrual loss were validated against a weighed reference method. Spearman rank correlation coefficients between blood loss assessed by Weighed Menstrual Loss and Menstrual Record was rs = 0.47 (p = 0.012), and between Weighed Menstrual Loss and Menstrual Recall, was rs = 0.61 (p = 0.001). The Record method correctly classified 66% of participants into the same tertile, grossly misclassifying 14%. The Recall method correctly classified 59% of participants, grossly misclassifying 7%. Reference method menstrual loss calculated for surrogate categories demonstrated a significant difference between the second and third tertiles for the Record method, and between the first and third tertiles for the Recall method. The Menstrual Recall method can differentiate between low and high levels of menstrual blood loss in young adult women, is quick to complete and analyse, and has a low participant burden.

A comparative study of novel spectrophotometric methods based on isosbestic points; application on a pharmaceutical ternary mixture

NASA Astrophysics Data System (ADS)

Lotfy, Hayam M.; Saleh, Sarah S.; Hassan, Nagiba Y.; Salem, Hesham

This work represents the application of the isosbestic points present in different absorption spectra. Three novel spectrophotometric methods were developed, the first method is the absorption subtraction method (AS) utilizing the isosbestic point in zero-order absorption spectra; the second method is the amplitude modulation method (AM) utilizing the isosbestic point in ratio spectra; and third method is the amplitude summation method (A-Sum) utilizing the isosbestic point in derivative spectra. The three methods were applied for the analysis of the ternary mixture of chloramphenicol (CHL), dexamethasone sodium phosphate (DXM) and tetryzoline hydrochloride (TZH) in eye drops in the presence of benzalkonium chloride as a preservative. The components at the isosbestic point were determined using the corresponding unified regression equation at this point with no need for a complementary method. The obtained results were statistically compared to each other and to that of the developed PLS model. The specificity of the developed methods was investigated by analyzing laboratory prepared mixtures and the combined dosage form. The methods were validated as per ICH guidelines where accuracy, repeatability, inter-day precision and robustness were found to be within the acceptable limits. The results obtained from the proposed methods were statistically compared with official ones where no significant difference was observed.

Towards an Airframe Noise Prediction Methodology: Survey of Current Approaches

NASA Technical Reports Server (NTRS)

Farassat, Fereidoun; Casper, Jay H.

2006-01-01

In this paper, we present a critical survey of the current airframe noise (AFN) prediction methodologies. Four methodologies are recognized. These are the fully analytic method, CFD combined with the acoustic analogy, the semi-empirical method and fully numerical method. It is argued that for the immediate need of the aircraft industry, the semi-empirical method based on recent high quality acoustic database is the best available method. The method based on CFD and the Ffowcs William- Hawkings (FW-H) equation with penetrable data surface (FW-Hpds ) has advanced considerably and much experience has been gained in its use. However, more research is needed in the near future particularly in the area of turbulence simulation. The fully numerical method will take longer to reach maturity. Based on the current trends, it is predicted that this method will eventually develop into the method of choice. Both the turbulence simulation and propagation methods need to develop more for this method to become useful. Nonetheless, the authors propose that the method based on a combination of numerical and analytical techniques, e.g., CFD combined with FW-H equation, should also be worked on. In this effort, the current symbolic algebra software will allow more analytical approaches to be incorporated into AFN prediction methods.

A Reconstructed Discontinuous Galerkin Method for the Compressible Euler Equations on Arbitrary Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong Luo; Luquing Luo; Robert Nourgaliev

2009-06-01

A reconstruction-based discontinuous Galerkin (DG) method is presented for the solution of the compressible Euler equations on arbitrary grids. By taking advantage of handily available and yet invaluable information, namely the derivatives, in the context of the discontinuous Galerkin methods, a solution polynomial of one degree higher is reconstructed using a least-squares method. The stencils used in the reconstruction involve only the van Neumann neighborhood (face-neighboring cells) and are compact and consistent with the underlying DG method. The resulting DG method can be regarded as an improvement of a recovery-based DG method in the sense that it shares the samemore » nice features as the recovery-based DG method, such as high accuracy and efficiency, and yet overcomes some of its shortcomings such as a lack of flexibility, compactness, and robustness. The developed DG method is used to compute a variety of flow problems on arbitrary meshes to demonstrate the accuracy and efficiency of the method. The numerical results indicate that this reconstructed DG method is able to obtain a third-order accurate solution at a slightly higher cost than its second-order DG method and provide an increase in performance over the third order DG method in terms of computing time and storage requirement.« less

[Comparison of different methods in dealing with HIV viral load data with diversified missing value mechanism on HIV positive MSM].

PubMed

Jiang, Z; Dou, Z; Song, W L; Xu, J; Wu, Z Y

2017-11-10

Objective: To compare results of different methods: in organizing HIV viral load (VL) data with missing values mechanism. Methods We used software SPSS 17.0 to simulate complete and missing data with different missing value mechanism from HIV viral loading data collected from MSM in 16 cities in China in 2013. Maximum Likelihood Methods Using the Expectation and Maximization Algorithm (EM), regressive method, mean imputation, delete method, and Markov Chain Monte Carlo (MCMC) were used to supplement missing data respectively. The results: of different methods were compared according to distribution characteristics, accuracy and precision. Results HIV VL data could not be transferred into a normal distribution. All the methods showed good results in iterating data which is Missing Completely at Random Mechanism (MCAR). For the other types of missing data, regressive and MCMC methods were used to keep the main characteristic of the original data. The means of iterating database with different methods were all close to the original one. The EM, regressive method, mean imputation, and delete method under-estimate VL while MCMC overestimates it. Conclusion: MCMC can be used as the main imputation method for HIV virus loading missing data. The iterated data can be used as a reference for mean HIV VL estimation among the investigated population.

Limited memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) method for the parameter estimation on geographically weighted ordinal logistic regression model (GWOLR)

NASA Astrophysics Data System (ADS)

Saputro, Dewi Retno Sari; Widyaningsih, Purnami

2017-08-01

In general, the parameter estimation of GWOLR model uses maximum likelihood method, but it constructs a system of nonlinear equations, making it difficult to find the solution. Therefore, an approximate solution is needed. There are two popular numerical methods: the methods of Newton and Quasi-Newton (QN). Newton's method requires large-scale time in executing the computation program since it contains Jacobian matrix (derivative). QN method overcomes the drawback of Newton's method by substituting derivative computation into a function of direct computation. The QN method uses Hessian matrix approach which contains Davidon-Fletcher-Powell (DFP) formula. The Broyden-Fletcher-Goldfarb-Shanno (BFGS) method is categorized as the QN method which has the DFP formula attribute of having positive definite Hessian matrix. The BFGS method requires large memory in executing the program so another algorithm to decrease memory usage is needed, namely Low Memory BFGS (LBFGS). The purpose of this research is to compute the efficiency of the LBFGS method in the iterative and recursive computation of Hessian matrix and its inverse for the GWOLR parameter estimation. In reference to the research findings, we found out that the BFGS and LBFGS methods have arithmetic operation schemes, including O(n2) and O(nm).

Comprehensive reliability allocation method for CNC lathes based on cubic transformed functions of failure mode and effects analysis

NASA Astrophysics Data System (ADS)

Yang, Zhou; Zhu, Yunpeng; Ren, Hongrui; Zhang, Yimin

2015-03-01

Reliability allocation of computerized numerical controlled(CNC) lathes is very important in industry. Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components, which is not applicable in some conditions. Aiming at solving the problem of CNC lathes reliability allocating, a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis(FMEA) is presented. Firstly, conventional reliability allocation methods are introduced. Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated. Subsequently, a cubic transformed function is established in order to overcome these limitations. Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence. Designers can choose appropriate transform amplitudes according to their requirements. Finally, a CNC lathe and a spindle system are used as an example to verify the new allocation method. Seven criteria are considered to compare the results of the new method with traditional methods. The allocation results indicate that the new method is more flexible than traditional methods. By employing the new cubic transformed function, the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

An Extraction Method of an Informative DOM Node from a Web Page by Using Layout Information

NASA Astrophysics Data System (ADS)

Tsuruta, Masanobu; Masuyama, Shigeru

We propose an informative DOM node extraction method from a Web page for preprocessing of Web content mining. Our proposed method LM uses layout data of DOM nodes generated by a generic Web browser, and the learning set consists of hundreds of Web pages and the annotations of informative DOM nodes of those Web pages. Our method does not require large scale crawling of the whole Web site to which the target Web page belongs. We design LM so that it uses the information of the learning set more efficiently in comparison to the existing method that uses the same learning set. By experiments, we evaluate the methods obtained by combining one that consists of the method for extracting the informative DOM node both the proposed method and the existing methods, and the existing noise elimination methods: Heur removes advertisements and link-lists by some heuristics and CE removes the DOM nodes existing in the Web pages in the same Web site to which the target Web page belongs. Experimental results show that 1) LM outperforms other methods for extracting the informative DOM node, 2) the combination method (LM, {CE(10), Heur}) based on LM (precision: 0.755, recall: 0.826, F-measure: 0.746) outperforms other combination methods.

Comparative study between the hand-wrist method and cervical vertebral maturation method for evaluation skeletal maturity in cleft patients.

PubMed

Manosudprasit, Montian; Wangsrimongkol, Tasanee; Pisek, Poonsak; Chantaramungkorn, Melissa

2013-09-01

To test the measure of agreement between use of the Skeletal Maturation Index (SMI) method of Fishman using hand-wrist radiographs and the Cervical Vertebral Maturation Index (CVMI) method for assessing skeletal maturity of the cleft patients. Hand-wrist and lateral cephalometric radiographs of 60 cleft subjects (35 females and 25 males, age range: 7-16 years) were used. Skeletal age was assessed using an adjustment to the SMI method of Fishman to compare with the CVMI method of Hassel and Farman. Agreement between skeletal age assessed by both methods and the intra- and inter-examiner reliability of both methods were tested by weighted kappa analysis. There was good agreement between the two methods with a kappa value of 0.80 (95% CI = 0.66-0.88, p-value <0.001). Reliability of intra- and inter-examiner of both methods was very good with kappa value ranging from 0.91 to 0.99. The CVMI method can be used as an alternative to the SMI method in skeletal age assessment in cleft patients with the benefit of no need of an additional radiograph and avoiding extra-radiation exposure. Comparing the two methods, the present study found better agreement from peak of adolescence onwards.

Computer-aided analysis with Image J for quantitatively assessing psoriatic lesion area.

PubMed

Sun, Z; Wang, Y; Ji, S; Wang, K; Zhao, Y

2015-11-01

Body surface area is important in determining the severity of psoriasis. However, objective, reliable, and practical method is still in need for this purpose. We performed a computer image analysis (CIA) of psoriatic area using the image J freeware to determine whether this method could be used for objective evaluation of psoriatic area. Fifteen psoriasis patients were randomized to be treated with adalimumab or placebo in a clinical trial. At each visit, the psoriasis area of each body site was estimated by two physicians (E-method), and standard photographs were taken. The psoriasis area in the pictures was assessed with CIA using semi-automatic threshold selection (T-method), or manual selection (M-method, gold standard). The results assessed by the three methods were analyzed with reliability and affecting factors evaluated. Both T- and E-method correlated strongly with M-method, and T-method had a slightly stronger correlation with M-method. Both T- and E-methods had a good consistency between the evaluators. All the three methods were able to detect the change in the psoriatic area after treatment, while the E-method tends to overestimate. The CIA with image J freeware is reliable and practicable in quantitatively assessing the lesional of psoriasis area. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mixed Methods in CAM Research: A Systematic Review of Studies Published in 2012

PubMed Central

Bishop, Felicity L.; Holmes, Michelle M.

2013-01-01

Background. Mixed methods research uses qualitative and quantitative methods together in a single study or a series of related studies. Objectives. To review the prevalence and quality of mixed methods studies in complementary medicine. Methods. All studies published in the top 10 integrative and complementary medicine journals in 2012 were screened. The quality of mixed methods studies was appraised using a published tool designed for mixed methods studies. Results. 4% of papers (95 out of 2349) reported mixed methods studies, 80 of which met criteria for applying the quality appraisal tool. The most popular formal mixed methods design was triangulation (used by 74% of studies), followed by embedded (14%), sequential explanatory (8%), and finally sequential exploratory (5%). Quantitative components were generally of higher quality than qualitative components; when quantitative components involved RCTs they were of particularly high quality. Common methodological limitations were identified. Most strikingly, none of the 80 mixed methods studies addressed the philosophical tensions inherent in mixing qualitative and quantitative methods. Conclusions and Implications. The quality of mixed methods research in CAM can be enhanced by addressing philosophical tensions and improving reporting of (a) analytic methods and reflexivity (in qualitative components) and (b) sampling and recruitment-related procedures (in all components). PMID:24454489

Accuracy of tree diameter estimation from terrestrial laser scanning by circle-fitting methods

NASA Astrophysics Data System (ADS)

Koreň, Milan; Mokroš, Martin; Bucha, Tomáš

2017-12-01

This study compares the accuracies of diameter at breast height (DBH) estimations by three initial (minimum bounding box, centroid, and maximum distance) and two refining (Monte Carlo and optimal circle) circle-fitting methods The circle-fitting algorithms were evaluated in multi-scan mode and a simulated single-scan mode on 157 European beech trees (Fagus sylvatica L.). DBH measured by a calliper was used as reference data. Most of the studied circle-fitting algorithms significantly underestimated the mean DBH in both scanning modes. Only the Monte Carlo method in the single-scan mode significantly overestimated the mean DBH. The centroid method proved to be the least suitable and showed significantly different results from the other circle-fitting methods in both scanning modes. In multi-scan mode, the accuracy of the minimum bounding box method was not significantly different from the accuracies of the refining methods The accuracy of the maximum distance method was significantly different from the accuracies of the refining methods in both scanning modes. The accuracy of the Monte Carlo method was significantly different from the accuracy of the optimal circle method in only single-scan mode. The optimal circle method proved to be the most accurate circle-fitting method for DBH estimation from point clouds in both scanning modes.

Chemometric methods for the simultaneous determination of some water-soluble vitamins.

PubMed

Mohamed, Abdel-Maaboud I; Mohamed, Horria A; Mohamed, Niveen A; El-Zahery, Marwa R

2011-01-01

Two spectrophotometric methods, derivative and multivariate methods, were applied for the determination of binary, ternary, and quaternary mixtures of the water-soluble vitamins thiamine HCI (I), pyridoxine HCI (II), riboflavin (III), and cyanocobalamin (IV). The first method is divided into first derivative and first derivative of ratio spectra methods, and the second into classical least squares and principal components regression methods. Both methods are based on spectrophotometric measurements of the studied vitamins in 0.1 M HCl solution in the range of 200-500 nm for all components. The linear calibration curves were obtained from 2.5-90 microg/mL, and the correlation coefficients ranged from 0.9991 to 0.9999. These methods were applied for the analysis of the following mixtures: (I) and (II); (I), (II), and (III); (I), (II), and (IV); and (I), (II), (III), and (IV). The described methods were successfully applied for the determination of vitamin combinations in synthetic mixtures and dosage forms from different manufacturers. The recovery ranged from 96.1 +/- 1.2 to 101.2 +/- 1.0% for derivative methods and 97.0 +/- 0.5 to 101.9 +/- 1.3% for multivariate methods. The results of the developed methods were compared with those of reported methods, and gave good accuracy and precision.

Perceptions of rural women about contraceptive usage in district Khushab, Punjab.

PubMed

Tabassum, Aqeela; Manj, Yasir Nawaz; Gunjial, Tahira Rehman; Nazir, Salma

2016-12-01

To identify the perceptions of rural women about modern contraceptive methods and to ascertain the psycho-social and economic attitude of women about family planning methods. This cross-sectional study was conducted at the University of Sargodha, Sargodha, Pakistan, from December 2014 to March 2015, and comprised married women. The sample was selected using multistage sampling technique through Fitzgibbon table. They were interviewed regarding use of family planning methods. . SPSS 16 was used for data analysis. Of the 500 women, 358(71.6%) were never-users and 142(28.4%) were past-users of family planning methods. Moreover, 52(14.5%) of never-users did not know about a single modern contraceptive method. Of the past-users, 43(30.3%) knew about 1-3 methods and 99(69.7%) about 4 or more methods. Furthermore, 153(30.6%) respondents graded condoms as good, 261(55.2%) agreed that family planning helped in improving one's standard of living to a great extent while 453(90.6%) indicated that family planning methods were not expensive. Besides, 366(71.2%) respondents believed that using contraceptive method caused infertility. Dissatisfaction with methods, method failure, bad experiences with side effects, privacy concerns and different myths associated to the methods were strongly related to the non-usage of modern contraceptive methods.

Fast polarimetric dehazing method for visibility enhancement in HSI colour space

NASA Astrophysics Data System (ADS)

Zhang, Wenfei; Liang, Jian; Ren, Liyong; Ju, Haijuan; Bai, Zhaofeng; Wu, Zhaoxin

2017-09-01

Image haze removal has attracted much attention in optics and computer vision fields in recent years due to its wide applications. In particular, the fast and real-time dehazing methods are of significance. In this paper, we propose a fast dehazing method in hue, saturation and intensity colour space based on the polarimetric imaging technique. We implement the polarimetric dehazing method in the intensity channel, and the colour distortion of the image is corrected using the white patch retinex method. This method not only reserves the detailed information restoration capacity, but also improves the efficiency of the polarimetric dehazing method. Comparison studies with state of the art methods demonstrate that the proposed method obtains equal or better quality results and moreover the implementation is much faster. The proposed method is promising in real-time image haze removal and video haze removal applications.

Parameter estimation of Monod model by the Least-Squares method for microalgae Botryococcus Braunii sp

NASA Astrophysics Data System (ADS)

See, J. J.; Jamaian, S. S.; Salleh, R. M.; Nor, M. E.; Aman, F.

2018-04-01

This research aims to estimate the parameters of Monod model of microalgae Botryococcus Braunii sp growth by the Least-Squares method. Monod equation is a non-linear equation which can be transformed into a linear equation form and it is solved by implementing the Least-Squares linear regression method. Meanwhile, Gauss-Newton method is an alternative method to solve the non-linear Least-Squares problem with the aim to obtain the parameters value of Monod model by minimizing the sum of square error ( SSE). As the result, the parameters of the Monod model for microalgae Botryococcus Braunii sp can be estimated by the Least-Squares method. However, the estimated parameters value obtained by the non-linear Least-Squares method are more accurate compared to the linear Least-Squares method since the SSE of the non-linear Least-Squares method is less than the linear Least-Squares method.

A Mixed Prioritization Operators Strategy Using A Single Measurement Criterion For AHP Application Development

NASA Astrophysics Data System (ADS)

Yuen, Kevin Kam Fung

2009-10-01

The most appropriate prioritization method is still one of the unsettled issues of the Analytic Hierarchy Process, although many studies have been made and applied. Interestingly, many AHP applications apply only Saaty's Eigenvector method as many studies have found that this method may produce rank reversals and have proposed various prioritization methods as alternatives. Some methods have been proved to be better than the Eigenvector method. However, these methods seem not to attract the attention of researchers. In this paper, eight important prioritization methods are reviewed. A Mixed Prioritization Operators Strategy (MPOS) is developed to select a vector which is prioritized by the most appropriate prioritization operator. To verify this new method, a case study of high school selection is revised using the proposed method. The contribution is that MPOS is useful for solving prioritization problems in the AHP.

On Multifunctional Collaborative Methods in Engineering Science

NASA Technical Reports Server (NTRS)

Ransom, Jonathan B.

2001-01-01

Multifunctional methodologies and analysis procedures are formulated for interfacing diverse subdomain idealizations including multi-fidelity modeling methods and multi-discipline analysis methods. These methods, based on the method of weighted residuals, ensure accurate compatibility of primary and secondary variables across the subdomain interfaces. Methods are developed using diverse mathematical modeling (i.e., finite difference and finite element methods) and multi-fidelity modeling among the subdomains. Several benchmark scalar-field and vector-field problems in engineering science are presented with extensions to multidisciplinary problems. Results for all problems presented are in overall good agreement with the exact analytical solution or the reference numerical solution. Based on the results, the integrated modeling approach using the finite element method for multi-fidelity discretization among the subdomains is identified as most robust. The multiple method approach is advantageous when interfacing diverse disciplines in which each of the method's strengths are utilized.

Modified microplate method for rapid and efficient estimation of siderophore produced by bacteria.

PubMed

Arora, Naveen Kumar; Verma, Maya

2017-12-01

In this study, siderophore production by various bacteria amongst the plant-growth-promoting rhizobacteria was quantified by a rapid and efficient method. In total, 23 siderophore-producing bacterial isolates/strains were taken to estimate their siderophore-producing ability by the standard method (chrome azurol sulphonate assay) as well as 96 well microplate method. Production of siderophore was estimated in percent siderophore unit by both the methods. It was observed that data obtained by both methods correlated positively with each other proving the correctness of microplate method. By the modified microplate method, siderophore production by several bacterial strains can be estimated both qualitatively and quantitatively at one go, saving time, chemicals, making it very less tedious, and also being cheaper in comparison with the method currently in use. The modified microtiter plate method as proposed here makes it far easier to screen the plant-growth-promoting character of plant-associated bacteria.

What can Numerical Computation do for the History of Science? (Study of an Orbit Drawn by Newton on a Letter to Hooke)

NASA Astrophysics Data System (ADS)

Stuchi, Teresa; Cardozo Dias, P.

2013-05-01

Abstract (2,250 Maximum Characters): On a letter to Robert Hooke, Isaac Newton drew the orbit of a mass moving under a constant attracting central force. How he drew the orbit may indicate how and when he developed dynamic categories. Some historians claim that Newton used a method contrived by Hooke; others that he used some method of curvature. We prove geometrically: Hooke’s method is a second order symplectic area preserving algorithm, and the method of curvature is a first order algorithm without special features; then we integrate the hamiltonian equations. Integration by the method of curvature can also be done exploring geometric properties of curves. We compare three methods: Hooke’s method, the method of curvature and a first order method. A fourth order algorithm sets a standard of comparison. We analyze which of these methods best explains Newton’s drawing.

What can numerical computation do for the history of science? (a study of an orbit drawn by Newton in a letter to Hooke)

NASA Astrophysics Data System (ADS)

Cardozo Dias, Penha Maria; Stuchi, T. J.

2013-11-01

In a letter to Robert Hooke, Isaac Newton drew the orbit of a mass moving under a constant attracting central force. The drawing of the orbit may indicate how and when Newton developed dynamic categories. Some historians claim that Newton used a method contrived by Hooke; others that he used some method of curvature. We prove that Hooke’s method is a second-order symplectic area-preserving algorithm, and the method of curvature is a first-order algorithm without special features; then we integrate the Hamiltonian equations. Integration by the method of curvature can also be done, exploring the geometric properties of curves. We compare three methods: Hooke’s method, the method of curvature and a first-order method. A fourth-order algorithm sets a standard of comparison. We analyze which of these methods best explains Newton’s drawing.

Adenosine Monophosphate-Based Detection of Bacterial Spores

NASA Technical Reports Server (NTRS)

Kern, Roger G.; Chen, Fei; Venkateswaran, Kasthuri; Hattori, Nori; Suzuki, Shigeya

2009-01-01

A method of rapid detection of bacterial spores is based on the discovery that a heat shock consisting of exposure to a temperature of 100 C for 10 minutes causes the complete release of adenosine monophosphate (AMP) from the spores. This method could be an alternative to the method described in the immediately preceding article. Unlike that method and related prior methods, the present method does not involve germination and cultivation; this feature is an important advantage because in cases in which the spores are those of pathogens, delays involved in germination and cultivation could increase risks of infection. Also, in comparison with other prior methods that do not involve germination, the present method affords greater sensitivity. At present, the method is embodied in a laboratory procedure, though it would be desirable to implement the method by means of a miniaturized apparatus in order to make it convenient and economical enough to encourage widespread use.

Meshless Local Petrov-Galerkin Method for Bending Problems

NASA Technical Reports Server (NTRS)

Phillips, Dawn R.; Raju, Ivatury S.

2002-01-01

Recent literature shows extensive research work on meshless or element-free methods as alternatives to the versatile Finite Element Method. One such meshless method is the Meshless Local Petrov-Galerkin (MLPG) method. In this report, the method is developed for bending of beams - C1 problems. A generalized moving least squares (GMLS) interpolation is used to construct the trial functions, and spline and power weight functions are used as the test functions. The method is applied to problems for which exact solutions are available to evaluate its effectiveness. The accuracy of the method is demonstrated for problems with load discontinuities and continuous beam problems. A Petrov-Galerkin implementation of the method is shown to greatly reduce computational time and effort and is thus preferable over the previously developed Galerkin approach. The MLPG method for beam problems yields very accurate deflections and slopes and continuous moment and shear forces without the need for elaborate post-processing techniques.

A variationally coupled FE-BE method for elasticity and fracture mechanics

NASA Technical Reports Server (NTRS)

Lu, Y. Y.; Belytschko, T.; Liu, W. K.

1991-01-01

A new method for coupling finite element and boundary element subdomains in elasticity and fracture mechanics problems is described. The essential feature of this new method is that a single variational statement is obtained for the entire domain, and in this process the terms associated with tractions on the interfaces between the subdomains are eliminated. This provides the additional advantage that the ambiguities associated with the matching of discontinuous tractions are circumvented. The method leads to a direct procedure for obtaining the discrete equations for the coupled problem without any intermediate steps. In order to evaluate this method and compare it with previous methods, a patch test for coupled procedures has been devised. Evaluation of this variationally coupled method and other methods, such as stiffness coupling and constraint traction matching coupling, shows that this method is substantially superior. Solutions for a series of fracture mechanics problems are also reported to illustrate the effectiveness of this method.

Comparing strategies to assess multiple behavior change in behavioral intervention studies.

PubMed

Drake, Bettina F; Quintiliani, Lisa M; Sapp, Amy L; Li, Yi; Harley, Amy E; Emmons, Karen M; Sorensen, Glorian

2013-03-01

Alternatives to individual behavior change methods have been proposed, however, little has been done to investigate how these methods compare. To explore four methods that quantify change in multiple risk behaviors targeting four common behaviors. We utilized data from two cluster-randomized, multiple behavior change trials conducted in two settings: small businesses and health centers. Methods used were: (1) summative; (2) z-score; (3) optimal linear combination; and (4) impact score. In the Small Business study, methods 2 and 3 revealed similar outcomes. However, physical activity did not contribute to method 3. In the Health Centers study, similar results were found with each of the methods. Multivitamin intake contributed significantly more to each of the summary measures than other behaviors. Selection of methods to assess multiple behavior change in intervention trials must consider study design, and the targeted population when determining the appropriate method/s to use.

Fast multipole methods on a cluster of GPUs for the meshless simulation of turbulence

NASA Astrophysics Data System (ADS)

Yokota, R.; Narumi, T.; Sakamaki, R.; Kameoka, S.; Obi, S.; Yasuoka, K.

2009-11-01

Recent advances in the parallelizability of fast N-body algorithms, and the programmability of graphics processing units (GPUs) have opened a new path for particle based simulations. For the simulation of turbulence, vortex methods can now be considered as an interesting alternative to finite difference and spectral methods. The present study focuses on the efficient implementation of the fast multipole method and pseudo-particle method on a cluster of NVIDIA GeForce 8800 GT GPUs, and applies this to a vortex method calculation of homogeneous isotropic turbulence. The results of the present vortex method agree quantitatively with that of the reference calculation using a spectral method. We achieved a maximum speed of 7.48 TFlops using 64 GPUs, and the cost performance was near 9.4/GFlops. The calculation of the present vortex method on 64 GPUs took 4120 s, while the spectral method on 32 CPUs took 4910 s.

Dynamic one-dimensional modeling of secondary settling tanks and system robustness evaluation.

PubMed

Li, Ben; Stenstrom, M K

2014-01-01

One-dimensional secondary settling tank models are widely used in current engineering practice for design and optimization, and usually can be expressed as a nonlinear hyperbolic or nonlinear strongly degenerate parabolic partial differential equation (PDE). Reliable numerical methods are needed to produce approximate solutions that converge to the exact analytical solutions. In this study, we introduced a reliable numerical technique, the Yee-Roe-Davis (YRD) method as the governing PDE solver, and compared its reliability with the prevalent Stenstrom-Vitasovic-Takács (SVT) method by assessing their simulation results at various operating conditions. The YRD method also produced a similar solution to the previously developed Method G and Enquist-Osher method. The YRD and SVT methods were also used for a time-to-failure evaluation, and the results show that the choice of numerical method can greatly impact the solution. Reliable numerical methods, such as the YRD method, are strongly recommended.

Simultaneous determination of binary mixture of amlodipine besylate and atenolol based on dual wavelengths

NASA Astrophysics Data System (ADS)

Lamie, Nesrine T.

2015-10-01

Four, accurate, precise, and sensitive spectrophotometric methods are developed for simultaneous determination of a binary mixture of amlodipine besylate (AM) and atenolol (AT). AM is determined at its λmax 360 nm (0D), while atenolol can be determined by four different methods. Method (A) is absorption factor (AF). Method (B) is the new ratio difference method (RD) which measures the difference in amplitudes between 210 and 226 nm. Method (C) is novel constant center spectrophotometric method (CC). Method (D) is mean centering of the ratio spectra (MCR) at 284 nm. The methods are tested by analyzing synthetic mixtures of the cited drugs and they are applied to their commercial pharmaceutical preparation. The validity of results is assessed by applying standard addition technique. The results obtained are found to agree statistically with those obtained by official methods, showing no significant difference with respect to accuracy and precision.

A scale-invariant change detection method for land use/cover change research

NASA Astrophysics Data System (ADS)

Xing, Jin; Sieber, Renee; Caelli, Terrence

2018-07-01

Land Use/Cover Change (LUCC) detection relies increasingly on comparing remote sensing images with different spatial and spectral scales. Based on scale-invariant image analysis algorithms in computer vision, we propose a scale-invariant LUCC detection method to identify changes from scale heterogeneous images. This method is composed of an entropy-based spatial decomposition, two scale-invariant feature extraction methods, Maximally Stable Extremal Region (MSER) and Scale-Invariant Feature Transformation (SIFT) algorithms, a spatial regression voting method to integrate MSER and SIFT results, a Markov Random Field-based smoothing method, and a support vector machine classification method to assign LUCC labels. We test the scale invariance of our new method with a LUCC case study in Montreal, Canada, 2005-2012. We found that the scale-invariant LUCC detection method provides similar accuracy compared with the resampling-based approach but this method avoids the LUCC distortion incurred by resampling.

Mixed methods research in mental health nursing.

PubMed

Kettles, A M; Creswell, J W; Zhang, W

2011-08-01

Mixed methods research is becoming more widely used in order to answer research questions and to investigate research problems in mental health and psychiatric nursing. However, two separate literature searches, one in Scotland and one in the USA, revealed that few mental health nursing studies identified mixed methods research in their titles. Many studies used the term 'embedded' but few studies identified in the literature were mixed methods embedded studies. The history, philosophical underpinnings, definition, types of mixed methods research and associated pragmatism are discussed, as well as the need for mixed methods research. Examples of mental health nursing mixed methods research are used to illustrate the different types of mixed methods: convergent parallel, embedded, explanatory and exploratory in their sequential and concurrent combinations. Implementing mixed methods research is also discussed briefly and the problem of identifying mixed methods research in mental and psychiatric nursing are discussed with some possible solutions to the problem proposed. © 2011 Blackwell Publishing.

Direct application of Padé approximant for solving nonlinear differential equations.

PubMed

Vazquez-Leal, Hector; Benhammouda, Brahim; Filobello-Nino, Uriel; Sarmiento-Reyes, Arturo; Jimenez-Fernandez, Victor Manuel; Garcia-Gervacio, Jose Luis; Huerta-Chua, Jesus; Morales-Mendoza, Luis Javier; Gonzalez-Lee, Mario

2014-01-01

This work presents a direct procedure to apply Padé method to find approximate solutions for nonlinear differential equations. Moreover, we present some cases study showing the strength of the method to generate highly accurate rational approximate solutions compared to other semi-analytical methods. The type of tested nonlinear equations are: a highly nonlinear boundary value problem, a differential-algebraic oscillator problem, and an asymptotic problem. The high accurate handy approximations obtained by the direct application of Padé method shows the high potential if the proposed scheme to approximate a wide variety of problems. What is more, the direct application of the Padé approximant aids to avoid the previous application of an approximative method like Taylor series method, homotopy perturbation method, Adomian Decomposition method, homotopy analysis method, variational iteration method, among others, as tools to obtain a power series solutions to post-treat with the Padé approximant. 34L30.

Methods of measuring soil moisture in the field

USGS Publications Warehouse

Johnson, A.I.

1962-01-01

For centuries, the amount of moisture in the soil has been of interest in agriculture. The subject of soil moisture is also of great importance to the hydrologist, forester, and soils engineer. Much equipment and many methods have been developed to measure soil moisture under field conditions. This report discusses and evaluates the various methods for measurement of soil moisture and describes the equipment needed for each method. The advantages and disadvantages of each method are discussed and an extensive list of references is provided for those desiring to study the subject in more detail. The gravimetric method is concluded to be the most satisfactory method for most problems requiring onetime moisture-content data. The radioactive method is normally best for obtaining repeated measurements of soil moisture in place. It is concluded that all methods have some limitations and that the ideal method for measurement of soil moisture under field conditions has yet to be perfected.

Computational methods for internal flows with emphasis on turbomachinery

NASA Technical Reports Server (NTRS)

Mcnally, W. D.; Sockol, P. M.

1981-01-01

Current computational methods for analyzing flows in turbomachinery and other related internal propulsion components are presented. The methods are divided into two classes. The inviscid methods deal specifically with turbomachinery applications. Viscous methods, deal with generalized duct flows as well as flows in turbomachinery passages. Inviscid methods are categorized into the potential, stream function, and Euler aproaches. Viscous methods are treated in terms of parabolic, partially parabolic, and elliptic procedures. Various grids used in association with these procedures are also discussed.

Digital signal processing methods for biosequence comparison.

PubMed Central

Benson, D C

1990-01-01

A method is discussed for DNA or protein sequence comparison using a finite field fast Fourier transform, a digital signal processing technique; and statistical methods are discussed for analyzing the output of this algorithm. This method compares two sequences of length N in computing time proportional to N log N compared to N2 for methods currently used. This method makes it feasible to compare very long sequences. An example is given to show that the method correctly identifies sites of known homology. PMID:2349096

Evaluation of methods for the assay of radium-228 in water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noyce, J.R.

1981-02-01

The technical literature from 1967 to May 1980 was searched for methods for assaying radium-228 in water. These methods were evaluated for their suitability as potential EPA reference methods for drinking water assays. The authors suggest the present EPA reference method (Krieger, 1976) be retained but improved, and a second method (McCurdy and Mellor, 1979), which employs beta-gamma coincidence counting, be added. Included in this report is a table that lists the principal features of 17 methods for radium-228 assays.

Comparing Methods for Assessing Reliability Uncertainty Based on Pass/Fail Data Collected Over Time

DOE PAGES

Abes, Jeff I.; Hamada, Michael S.; Hills, Charles R.

2017-12-20

In this paper, we compare statistical methods for analyzing pass/fail data collected over time; some methods are traditional and one (the RADAR or Rationale for Assessing Degradation Arriving at Random) was recently developed. These methods are used to provide uncertainty bounds on reliability. We make observations about the methods' assumptions and properties. Finally, we illustrate the differences between two traditional methods, logistic regression and Weibull failure time analysis, and the RADAR method using a numerical example.

Comparing Methods for Assessing Reliability Uncertainty Based on Pass/Fail Data Collected Over Time

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abes, Jeff I.; Hamada, Michael S.; Hills, Charles R.

In this paper, we compare statistical methods for analyzing pass/fail data collected over time; some methods are traditional and one (the RADAR or Rationale for Assessing Degradation Arriving at Random) was recently developed. These methods are used to provide uncertainty bounds on reliability. We make observations about the methods' assumptions and properties. Finally, we illustrate the differences between two traditional methods, logistic regression and Weibull failure time analysis, and the RADAR method using a numerical example.

Remote air pollution measurement

NASA Technical Reports Server (NTRS)

Byer, R. L.

1975-01-01

This paper presents a discussion and comparison of the Raman method, the resonance and fluorescence backscatter method, long path absorption methods and the differential absorption method for remote air pollution measurement. A comparison of the above remote detection methods shows that the absorption methods offer the most sensitivity at the least required transmitted energy. Topographical absorption provides the advantage of a single ended measurement, and differential absorption offers the additional advantage of a fully depth resolved absorption measurement. Recent experimental results confirming the range and sensitivity of the methods are presented.

Conservation properties of numerical integration methods for systems of ordinary differential equations

NASA Technical Reports Server (NTRS)

Rosenbaum, J. S.

1976-01-01

If a system of ordinary differential equations represents a property conserving system that can be expressed linearly (e.g., conservation of mass), it is then desirable that the numerical integration method used conserve the same quantity. It is shown that both linear multistep methods and Runge-Kutta methods are 'conservative' and that Newton-type methods used to solve the implicit equations preserve the inherent conservation of the numerical method. It is further shown that a method used by several authors is not conservative.

The application of generalized, cyclic, and modified numerical integration algorithms to problems of satellite orbit computation

NASA Technical Reports Server (NTRS)

Chesler, L.; Pierce, S.

1971-01-01

Generalized, cyclic, and modified multistep numerical integration methods are developed and evaluated for application to problems of satellite orbit computation. Generalized methods are compared with the presently utilized Cowell methods; new cyclic methods are developed for special second-order differential equations; and several modified methods are developed and applied to orbit computation problems. Special computer programs were written to generate coefficients for these methods, and subroutines were written which allow use of these methods with NASA's GEOSTAR computer program.

A comparison of modifications of the McMaster method for the enumeration of Ascaris suum eggs in pig faecal samples.

PubMed

Pereckiene, A; Kaziūnaite, V; Vysniauskas, A; Petkevicius, S; Malakauskas, A; Sarkūnas, M; Taylor, M A

2007-10-21

The comparative efficacies of seven published McMaster method modifications for faecal egg counting were evaluated on pig faecal samples containing Ascaris suum eggs. Comparisons were made as to the number of samples found to be positive by each of the methods, the total egg counts per gram (EPG) of faeces, the variations in EPG obtained in the samples examined, and the ease of use of each of the methods. Each method was evaluated after the examination of 30 samples of faeces. The positive samples were identified by counting A. suum eggs in one, two and three sections of newly designed McMaster chamber. In the present study compared methods were reported by: I-Henriksen and Aagaard [Henriksen, S.A., Aagaard, K.A., 1976. A simple flotation and McMaster method. Nord. Vet. Med. 28, 392-397]; II-Kassai [Kassai, T., 1999. Veterinary Helminthology. Butterworth-Heinemann, Oxford, 260 pp.]; III and IV-Urquhart et al. [Urquhart, G.M., Armour, J., Duncan, J.L., Dunn, A.M., Jennings, F.W., 1996. Veterinary Parasitology, 2nd ed. Blackwell Science Ltd., Oxford, UK, 307 pp.] (centrifugation and non-centrifugation methods); V and VI-Grønvold [Grønvold, J., 1991. Laboratory diagnoses of helminths common routine methods used in Denmark. In: Nansen, P., Grønvold, J., Bjørn, H. (Eds.), Seminars on Parasitic Problems in Farm Animals Related to Fodder Production and Management. The Estonian Academy of Sciences, Tartu, Estonia, pp. 47-48] (salt solution, and salt and glucose solution); VII-Thienpont et al. [Thienpont, D., Rochette, F., Vanparijs, O.F.J., 1986. Diagnosing Helminthiasis by Coprological Examination. Coprological Examination, 2nd ed. Janssen Research Foundation, Beerse, Belgium, 205 pp.]. The number of positive samples by examining single section ranged from 98.9% (method I), to 51.1% (method VII). Only with methods I and II, there was a 100% positivity in two out of three of the chambers examined, and FEC obtained using these methods were significantly (p<0.01) higher comparing to remaining methods. Mean FEC varied between 243 EPG (method I) and 82 EPG (method IV). Examination of all three chambers resulted in four methods (I, II, V and VI) having 100% sensitivity, while method VII had the lowest 83.3% sensitivity. Mean FEC in this case varied between 239 EPG (method I) and 81 EPG (method IV). Based on the mean FEC for two chambers, an efficiency coefficient (EF) was calculated and equated to 1 for the highest egg count (method I) and 0.87, 0.57, 0.34, 0.53, 0.49 and 0.50 for remaining methods (II-VII), respectively. Efficiency coefficients make it possible not only to recalculate and unify results of faeces examination obtained by any method but also to interpret coproscopical examinations by other authors. Method VII was the easiest and quickest but least sensitive, and method I the most complex but most sensitive. Examining two or three sections of the McMaster chamber resulted in increased sensitivity for all methods.

Effect of preparation methods on dispersion stability and electrochemical performance of graphene sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Li, E-mail: chenli1981@lut.cn; Li, Na; Zhang, Mingxia

Chemical exfoliation is one of the most important strategies for preparing graphene. The aggregation of graphene sheets severely prevents graphene from exhibiting excellent properties. However, there are no attempts to investigate the effect of preparation methods on the dispersity of graphene sheets. In this study, three chemical exfoliation methods, including Hummers method, modified Hummers method, and improved method, were used to prepare graphene sheets. The influence of preparation methods on the structure, dispersion stability in organic solvents, and electrochemical properties of graphene sheets were investigated. Fourier transform infrared microscopy, Raman spectra, transmission electron microscopy, and UV–vis spectrophotometry were employed tomore » analyze the structure of the as-prepared graphene sheets. The results showed that graphene prepared by improved method exhibits excellent dispersity and stability in organic solvents without any additional stabilizer or modifier, which is attributed to the completely exfoliation and regular structure. Moreover, cyclic voltammetric and electrochemical impedance spectroscopy measurements showed that graphene prepared by improved method exhibits superior electrochemical properties than that prepared by the other two methods. - Graphical abstract: Graphene oxides with different oxidation degree were obtained via three methods, and then graphene with different crystal structures were created by chemical reduction of exfoliated graphene oxides. - Highlights: • Graphene oxides with different oxidation degree were obtained via three oxidation methods. • The influence of oxidation methods on microstructure of graphene was investigated. • The effect of oxidation methods on dispersion stability of graphene was investigated. • The effect of oxidation methods on electrochemical properties of graphene was discussed.« less

A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells

PubMed Central

Zongyi, Yin; Funian, Zou; Hao, Li; Ying, Cheng; Jialin, Zhang

2017-01-01

Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods). Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P < 0.05). There was no significant difference in islet viability among the four groups. The islet purity, function, yield, and cost of our method were superior to those of the Ficoll-400 and 1077 methods, but inferior to the handpicking method. However, the handpicking method may cause wrist injury and visual impairment in researchers during large-scale islet isolation (>1000 islets). In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized. PMID:28207765

Evaluating marginal likelihood with thermodynamic integration method and comparison with several other numerical methods

DOE PAGES

Liu, Peigui; Elshall, Ahmed S.; Ye, Ming; ...

2016-02-05

Evaluating marginal likelihood is the most critical and computationally expensive task, when conducting Bayesian model averaging to quantify parametric and model uncertainties. The evaluation is commonly done by using Laplace approximations to evaluate semianalytical expressions of the marginal likelihood or by using Monte Carlo (MC) methods to evaluate arithmetic or harmonic mean of a joint likelihood function. This study introduces a new MC method, i.e., thermodynamic integration, which has not been attempted in environmental modeling. Instead of using samples only from prior parameter space (as in arithmetic mean evaluation) or posterior parameter space (as in harmonic mean evaluation), the thermodynamicmore » integration method uses samples generated gradually from the prior to posterior parameter space. This is done through a path sampling that conducts Markov chain Monte Carlo simulation with different power coefficient values applied to the joint likelihood function. The thermodynamic integration method is evaluated using three analytical functions by comparing the method with two variants of the Laplace approximation method and three MC methods, including the nested sampling method that is recently introduced into environmental modeling. The thermodynamic integration method outperforms the other methods in terms of their accuracy, convergence, and consistency. The thermodynamic integration method is also applied to a synthetic case of groundwater modeling with four alternative models. The application shows that model probabilities obtained using the thermodynamic integration method improves predictive performance of Bayesian model averaging. As a result, the thermodynamic integration method is mathematically rigorous, and its MC implementation is computationally general for a wide range of environmental problems.« less

A robust two-way semi-linear model for normalization of cDNA microarray data

PubMed Central

Wang, Deli; Huang, Jian; Xie, Hehuang; Manzella, Liliana; Soares, Marcelo Bento

2005-01-01

Background Normalization is a basic step in microarray data analysis. A proper normalization procedure ensures that the intensity ratios provide meaningful measures of relative expression values. Methods We propose a robust semiparametric method in a two-way semi-linear model (TW-SLM) for normalization of cDNA microarray data. This method does not make the usual assumptions underlying some of the existing methods. For example, it does not assume that: (i) the percentage of differentially expressed genes is small; or (ii) the numbers of up- and down-regulated genes are about the same, as required in the LOWESS normalization method. We conduct simulation studies to evaluate the proposed method and use a real data set from a specially designed microarray experiment to compare the performance of the proposed method with that of the LOWESS normalization approach. Results The simulation results show that the proposed method performs better than the LOWESS normalization method in terms of mean square errors for estimated gene effects. The results of analysis of the real data set also show that the proposed method yields more consistent results between the direct and the indirect comparisons and also can detect more differentially expressed genes than the LOWESS method. Conclusions Our simulation studies and the real data example indicate that the proposed robust TW-SLM method works at least as well as the LOWESS method and works better when the underlying assumptions for the LOWESS method are not satisfied. Therefore, it is a powerful alternative to the existing normalization methods. PMID:15663789

A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells.

PubMed

Zongyi, Yin; Funian, Zou; Hao, Li; Ying, Cheng; Jialin, Zhang; Baifeng, Li

2017-01-01

Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods). Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P < 0.05). There was no significant difference in islet viability among the four groups. The islet purity, function, yield, and cost of our method were superior to those of the Ficoll-400 and 1077 methods, but inferior to the handpicking method. However, the handpicking method may cause wrist injury and visual impairment in researchers during large-scale islet isolation (>1000 islets). In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized.

A new cation-exchange method for accurate field speciation of hexavalent chromium

USGS Publications Warehouse

Ball, J.W.; McCleskey, R. Blaine

2003-01-01

A new method for field speciation of Cr(VI) has been developed to meet present stringent regulatory standards and to overcome the limitations of existing methods. The method consists of passing a water sample through strong acid cation-exchange resin at the field site, where Cr(III) is retained while Cr(VI) passes into the effluent and is preserved for later determination. The method is simple, rapid, portable, and accurate, and makes use of readily available, inexpensive materials. Cr(VI) concentrations are determined later in the laboratory using any elemental analysis instrument sufficiently sensitive to measure the Cr(VI) concentrations of interest. The new method allows measurement of Cr(VI) concentrations as low as 0.05 ??g 1-1, storage of samples for at least several weeks prior to analysis, and use of readily available analytical instrumentation. Cr(VI) can be separated from Cr(III) between pH 2 and 11 at Cr(III)/Cr(VI) concentration ratios as high as 1000. The new method has demonstrated excellent comparability with two commonly used methods, the Hach Company direct colorimetric method and USEPA method 218.6. The new method is superior to the Hach direct colorimetric method owing to its relative sensitivity and simplicity. The new method is superior to USEPA method 218.6 in the presence of Fe(II) concentrations up to 1 mg 1-1 and Fe(III) concentrations up to 10 mg 1-1. Time stability of preserved samples is a significant advantage over the 24-h time constraint specified for USEPA method 218.6.

Whole-Body Computed Tomography-Based Body Mass and Body Fat Quantification: A Comparison to Hydrostatic Weighing and Air Displacement Plethysmography.

PubMed

Gibby, Jacob T; Njeru, Dennis K; Cvetko, Steve T; Heiny, Eric L; Creer, Andrew R; Gibby, Wendell A

We correlate and evaluate the accuracy of accepted anthropometric methods of percent body fat (%BF) quantification, namely, hydrostatic weighing (HW) and air displacement plethysmography (ADP), to 2 automatic adipose tissue quantification methods using computed tomography (CT). Twenty volunteer subjects (14 men, 6 women) received head-to-toe CT scans. Hydrostatic weighing and ADP were obtained from 17 and 12 subjects, respectively. The CT data underwent conversion using 2 separate algorithms, namely, the Schneider method and the Beam method, to convert Hounsfield units to their respective tissue densities. The overall mass and %BF of both methods were compared with HW and ADP. When comparing ADP to CT data using the Schneider method and Beam method, correlations were r = 0.9806 and 0.9804, respectively. Paired t tests indicated there were no statistically significant biases. Additionally, observed average differences in %BF between ADP and the Schneider method and the Beam method were 0.38% and 0.77%, respectively. The %BF measured from ADP, the Schneider method, and the Beam method all had significantly higher mean differences when compared with HW (3.05%, 2.32%, and 1.94%, respectively). We have shown that total body mass correlates remarkably well with both the Schneider method and Beam method of mass quantification. Furthermore, %BF calculated with the Schneider method and Beam method CT algorithms correlates remarkably well with ADP. The application of these CT algorithms have utility in further research to accurately stratify risk factors with periorgan, visceral, and subcutaneous types of adipose tissue, and has the potential for significant clinical application.

Method for determination of aflatoxin M₁ in cheese and butter by HPLC using an immunoaffinity column.

PubMed

Sakuma, Hisako; Kamata, Yoichi; Sugita-Konishi, Yoshiko; Kawakami, Hiroshi

2011-01-01

A rapid, sensitive convenient method for determination of aflatoxin M₁ (AFM₁) in cheese and butter by HPLC was developed and validated. The method employs a safe extraction solution (mixture of acetonitrile, methanol and water) and an immunoaffinity column (IAC) for clean-up. Compared with the widely used method employing chloroform and a Florisil column, the IAC method has a short analytical time and there are no interference peaks. The limits of quantification (LOQ) of the IAC method were 0.12 and 0.14 µg/kg, while those of the Florisil column method were 0.47 and 0.23 µg/kg in cheese and buffer, respectively. The recovery and relative standard deviation (RSD) for cheese (spiked at 0.5 µg/kg) in the IAC method were 92% and 7%, respectively, while for the Florisil column method the corresponding values were 76% and 10%. The recovery and RSD for butter (spiked at 0.5 µg/kg) in the IAC method were 97% and 9%, and those in the Florisil method were 74% and 9%, respectively. In the IAC method, the values of in-house precision (n=2, day=5) of cheese and butter (spiked at 0.5 µg/kg) were 9% and 13%, respectively. The IAC method is superior to the Florisil column method in terms of safety, ease of handling, sensitivity and reliability. A survey of AFM₁ contamination in imported cheese and butter in Japan was conducted by the IAC method. AFM₁ was not detected in 60 samples of cheese and 30 samples of butter.

26 CFR 1.412(c)(1)-3 - Applying the minimum funding requirements to restored plans.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) In general—(1) Restoration method. The restoration method is a funding method that adapts the... spread gain method that maintains an unfunded liability. A plan may adopt any cost method that satisfies...

Comparison of modal superposition methods for the analytical solution to moving load problems.

DOT National Transportation Integrated Search

1994-01-01

The response of bridge structures to moving loads is investigated using modal superposition methods. Two distinct modal superposition methods are available: the modedisplacement method and the mode-acceleration method. While the mode-displacement met...

Turbulent boundary layers over nonstationary plane boundaries

NASA Technical Reports Server (NTRS)

Roper, A. T.; Gentry, G. L., Jr.

1978-01-01

Methods of predicting integral parameters and skin friction coefficients of turbulent boundary layers developing over moving ground planes were evaluated. The three methods evaluated were: relative integral parameter method; relative power law method; and modified law of the wall method.

Inventory-based estimates of forest biomass carbon stocks in China: A comparison of three methods

Treesearch

Zhaodi Guo; Jingyun Fang; Yude Pan; Richard Birdsey

2010-01-01

Several studies have reported different estimates for forest biomass carbon (C) stocks in China. The discrepancy among these estimates may be largely attributed to the methods used. In this study, we used three methods [mean biomass density method (MBM), mean ratio method (MRM), and continuous biomass expansion factor (BEF) method (abbreviated as CBM)] applied to...

Comparative Evaluation of Two Methods to Estimate Natural Gas Production in Texas

EIA Publications

2003-01-01

This report describes an evaluation conducted by the Energy Information Administration (EIA) in August 2003 of two methods that estimate natural gas production in Texas. The first method (parametric method) was used by EIA from February through August 2003 and the second method (multinomial method) replaced it starting in September 2003, based on the results of this evaluation.

Hypothesis Testing Using Factor Score Regression: A Comparison of Four Methods

ERIC Educational Resources Information Center

Devlieger, Ines; Mayer, Axel; Rosseel, Yves

2016-01-01

In this article, an overview is given of four methods to perform factor score regression (FSR), namely regression FSR, Bartlett FSR, the bias avoiding method of Skrondal and Laake, and the bias correcting method of Croon. The bias correcting method is extended to include a reliable standard error. The four methods are compared with each other and…

Using Caspar Creek flow records to test peak flow estimation methods applicable to crossing design

Treesearch

Peter H. Cafferata; Leslie M. Reid

2017-01-01

Long-term flow records from sub-watersheds in the Caspar Creek Experimental Watersheds were used to test the accuracy of four methods commonly used to estimate peak flows in small forested watersheds: the Rational Method, the updated USGS Magnitude and Frequency Method, flow transference methods, and the NRCS curve number method. Comparison of measured and calculated...

Slip and Slide Method of Factoring Trinomials with Integer Coefficients over the Integers

ERIC Educational Resources Information Center

Donnell, William A.

2012-01-01

In intermediate and college algebra courses there are a number of methods for factoring quadratic trinomials with integer coefficients over the integers. Some of these methods have been given names, such as trial and error, reversing FOIL, AC method, middle term splitting method and slip and slide method. The purpose of this article is to discuss…