NASA Technical Reports Server (NTRS)
Grosveld, Ferdinand W.; Rizzi, Stephen A.; Rice, Chad E.
2004-01-01
This document represents a compilation of three informal reports from reverberant acoustic tests performed on X-37 hot structure control surfaces in the NASA Langley Research Center Structural Acoustics Loads and Transmission (SALT) facility. The first test was performed on a carbon-silicone carbide flaperon subcomponent on February 24, 2004. The second test was performed on a carbon-carbon ruddervator subcomponent on May 27, 2004. The third test was performed on a carbon-carbon flaperon subcomponent on June 30, 2004.
Overview of an Advanced Hypersonic Structural Concept Test Program
NASA Technical Reports Server (NTRS)
Stephens, Craig A.; Hudson, Larry D.; Piazza, Anthony
2007-01-01
This viewgraph presentation provides an overview of hypersonics M&S advanced structural concepts development and experimental methods. The discussion on concepts development includes the background, task objectives, test plan, and current status of the C/SiC Ruddervator Subcomponent Test Article (RSTA). The discussion of experimental methods examines instrumentation needs, sensors of interest, and examples of ongoing efforts in the development of extreme environment sensors.
10.2 Thermal-Structural Testing
NASA Technical Reports Server (NTRS)
Hudson, Larry D.
2008-01-01
Objective: Test a C/SiC Ruddervator Subcomponent under relevant thermal, mechanical & dynamic loading a) Thermal-structural mission cycling for re-entry and hypersonic cruise conditions; b) High-temperature modal survey to study the effect of heating on mode shapes, natural frequencies and damping. Supports NASA ARMD Hypersonics Material & Structures Program. Partners: NASA Dryden / Langley / Glenn, Lockheed-Martin, Materials Research & Design, GE CCP Test Phases - Phase 1: Acoustic-Vibration Testing (LaRC) completed - Phase 2: Thermal-Mechanical Testing (DFRC) in assembly - Phase 3: Mechanical Testing (DFRC) in assembly
2007 Research and Engineering Annual Report
NASA Technical Reports Server (NTRS)
Stoliker, Patrick; Bowers, Albion; Cruciani, Everlyn
2008-01-01
Selected research and technology activities at NASA Dryden Flight Research Center are summarized. These following activities exemplify the Center's varied and productive research efforts: Developing a Requirements Development Guide for an Automatic Ground Collision Avoidance System; Digital Terrain Data Compression and Rendering for Automatic Ground Collision Avoidance Systems; Nonlinear Flutter/Limit Cycle Oscillations Prediction Tool; Nonlinear System Identification Using Orthonormal Bases: Application to Aeroelastic/Aeroservoelastic Systems; Critical Aerodynamic Flow Feature Indicators: Towards Application with the Aerostructures Test Wing; Multidisciplinary Design, Analysis, and Optimization Tool Development Using a Genetic Algorithm; Structural Model Tuning Capability in an Object-Oriented Multidisciplinary Design, Analysis, and Optimization Tool; Extension of Ko Straight-Beam Displacement Theory to the Deformed Shape Predictions of Curved Structures; F-15B with Phoenix Missile and Pylon Assembly--Drag Force Estimation; Mass Property Testing of Phoenix Missile Hypersonic Testbed Hardware; ARMD Hypersonics Project Materials and Structures: Testing of Scramjet Thermal Protection System Concepts; High-Temperature Modal Survey of the Ruddervator Subcomponent Test Article; ARMD Hypersonics Project Materials and Structures: C/SiC Ruddervator Subcomponent Test and Analysis Task; Ground Vibration Testing and Model Correlation of the Phoenix Missile Hypersonic Testbed; Phoenix Missile Hypersonic Testbed: Performance Design and Analysis; Crew Exploration Vehicle Launch Abort System-Pad Abort-1 (PA-1) Flight Test; Testing the Orion (Crew Exploration Vehicle) Launch Abort System-Ascent Abort-1 (AA-1) Flight Test; SOFIA Flight-Test Flutter Prediction Methodology; SOFIA Closed-Door Aerodynamic Analyses; SOFIA Handling Qualities Evaluation for Closed-Door Operations; C-17 Support of IRAC Engine Model Development; Current Capabilities and Future Upgrade Plans of the C-17 Data Rack; Intelligent Data Mining Capabilities as Applied to Integrated Vehicle Health Management; STARS Flight Demonstration No. 2 IP Data Formatter; Space-Based Telemetry and Range Safety (STARS) Flight Demonstration No. 2 Range User Flight Test Results; Aerodynamic Effects of the Quiet Spike(tm) on an F-15B Aircraft; F-15 Intelligent Flight Controls-Increased Destabilization Failure; F-15 Integrated Resilient Aircraft Control (IRAC) Improved Adaptive Controller; Aeroelastic Analysis of the Ikhana/Fire Pod System; Ikhana: Western States Fire Missions Utilizing the Ames Research Center Fire Sensor; Ikhana: Fiber-Optic Wing Shape Sensors; Ikhana: ARTS III; SOFIA Closed-Door Flutter Envelope Flight Testing; F-15B Quiet Spike(TM) Aeroservoelastic Flight Test Data Analysis; and UAVSAR Platform Precision Autopilot Flight Results.
High-Temperature Modal Survey of a Hot-Structure Control Surface
NASA Technical Reports Server (NTRS)
Spivey, Natalie D.
2011-01-01
Ground vibration tests are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicles, thermoelastic vibration testing techniques are neither well established nor routinely performed. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. When high-temperature materials, which increase in stiffness when heated, are incorporated into a hot-structure that contains metallic components that decrease in stiffness when heated, the interaction between those materials can affect the hypersonic flutter analysis. A high-temperature modal survey will expand the research database for hypersonics and improve the understanding of this dual-material interaction. This report discusses the vibration testing of the carbon-silicon carbide Ruddervator Subcomponent Test Article, which is a truncated version of a full-scale hot-structure control surface. Two series of room-temperature modal test configurations were performed in order to define the modal characteristics of the test article during the elevated-temperature modal survey: one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary). Testing was performed in the NASA Dryden Flight Research Center Flight Loads Laboratory Large Nitrogen Test Chamber.
High-Temperature Modal Survey of a Hot-Structure Control Surface
NASA Technical Reports Server (NTRS)
Spivey, Natalie Dawn
2010-01-01
Ground vibration tests or modal surveys are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicle applications, thermoelastic vibration testing techniques are not well established and are not routinely performed for supporting hypersonic flutter analysis. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. High-temperature materials have the unique property of increasing in stiffness when heated. When these materials are incorporated into a hot-structure, which includes metallic components that decrease in stiffness with increasing temperature, the interaction between the two materials systems needs to be understood because that interaction could ultimately affect the hypersonic flutter analysis. Performing a high-temperature modal survey will expand the research database for hypersonics and will help build upon the understanding of the dual material interaction. This paper will discuss the vibration testing of the Carbon-Silicon Carbide Ruddervator Subcomponent Test Article which is a truncated version of the full-scale X-37 hot-structure control surface. In order to define the modal characteristics of the test article during the elevated-temperature modal survey, two series of room-temperature modal test configurations had to be performed. The room-temperature test series included one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary condition) in NASA Dryden's Flight Loads Lab large nitrogen test chamber.
Hot Structure Control Surface Progress for X-37 Technology Development Program
NASA Technical Reports Server (NTRS)
Valentine, P. G.; Meyer, David L. (Editor); Snow, Holly (Editor)
2004-01-01
The NASA Marshall Space Flight Center (MSFC) has been leading the development of technologies that will enable the development, fabrication, and flight of the automated X-37 Orbital Vehicle (OV). With the Administration s recent announcement of the Vision for Space Exploration, NASA placed the X-37 OV design on hold while developing detailed requirements for a Crew Exploration Vehicle, but has continued funding the development of high-risk, critical technologies for potential future space exploration vehicle applications. Hot Structure Control Surfaces (HSCS) technology development is one of the high-priority areas being funded at this time. The goal of HSCS research is to mitigate risk by qualifying the lightest possible components that meet the stringent X-37 OV weight and performance requirements, including Shuttle-type reen- try environments with peak temperatures of 2800 OF. The small size of the X-37 OV (25.7-feet long and 14.9-foot wingspan) drives the need for advanced HSCS because the vehicle's two primary aerodynamic surfaces, the flaperons and ruddervators, have thicknesses ranging from approximately 5 in. down to 1 in. Traditional metallic or polymer-matrix composites covered with tile or blanket thermal protection system (TPS) materials cannot be used as there is insufficient volume to fabricate such multi-component structures. Therefore, carbon-carbon (C-C) and carbodsilicon-carbide (C-SiC) composite HSCS structures are being developed in parallel by two teams supporting the X-37 prime contractor (The Boeing Company). The Science Applications International Coy. (SAIC) and Carbon-Carbon Advanced Technologies, Inc. (C-CAT) team is developing the C-C HSCS, while the General Electric Energy Power Systems Composites (GE-PSC) and Materials Research and Design (MRD) team is developing the C-SiC HSCS. These two teams were selected to reduce the high level of risk associated with developing advanced control surface components. They have continued HSCS development work as part of the X-37 critical technology development contract. The SAIC/C-CAT team is using Advanced Carbon-Carbon (ACC) because its fabrication is very similar to the process used for Space Shuttle Reinforced Carbon-Carbon fabrication, including the Sic-based pack cementation conversion coating systems using with both materials. ACC was selected over RCC because it has much higher tension and compressions strengths, and because T-300 fiber is readily available, whereas RCC rayon fiber is no longer manufactured. The GE-PSC/MRD team is using a T-300 fiber-reinforced Sic matrix composite material densified by chemical vapor infiltration. The C-Sic material has an Sic-based environmental barrier coating. Major accomplishments have been made over the past year by both HSCS teams. C-C and C- SiC flaperon subcomponents, which are truncated full-scale versions of flight hardware, have been fabricated and are undergoing testing at the NASA Dryden Flight Research Center, NASA Langley Research Center, and U.S. Air Force Research Laboratory. By the end of 2004, ruddervator subcomponents also will be delivered and tested. As NASA moves forward in realizing the Vision for Space Exploration, it will continue to invest in advanced research and development aimed at making new generations of spacecraft safer, more reliable, and more affordable. The X-37 HSCS effort ultimately will benefit the Agency's vision and mission.
NASA Technical Reports Server (NTRS)
Valentine, Peter G; Rivers, H. Kevin; Chen, Victor L.
2004-01-01
Carbon/Silicon-Carbide (C-Sic) ceramic matrix composite (CMC) flaperon and ruddervator control surface components are being developed for the X-37 Orbital Vehicle (OV). The results of the prior NASA LaRC led work, aimed at developing C-Sic flaperon and ruddervator components for the X-37, will be reviewed. The status of several on-going and/or planned NASA, USAF, and Boeing programs that will support the development of control surface components for the X-37 OV will also be reviewed. The overall design and development philosophy being employed to assemble a team(s) to develop both: (a) C-Sic hot structure control surface components for the X-37 OV, and (b) carbon-carbon (C-C) hot structure components (a risk-reduction backup option for the OV), will be presented.
Control system health test system and method
Hoff, Brian D.; Johnson, Kris W.; Akasam, Sivaprasad; Baker, Thomas M.
2006-08-15
A method is provided for testing multiple elements of a work machine, including a control system, a component, a sub-component that is influenced by operations of the component, and a sensor that monitors a characteristic of the sub-component. In one embodiment, the method is performed by the control system and includes sending a command to the component to adjust a first parameter associated with an operation of the component. Also, the method includes detecting a sensor signal from the sensor reflecting a second parameter associated with a characteristic of the sub-component and determining whether the second parameter is acceptable based on the command. The control system may diagnose at least one of the elements of the work machine when the second parameter of the sub-component is not acceptable.
NASA Technical Reports Server (NTRS)
Stotler, C. L., Jr.; Johnston, E. A.; Freeman, D. S.
1977-01-01
The element and subcomponent testing conducted to verify the under the wing composite nacelle design is reported. This composite nacelle consists of an inlet, outer cowl doors, inner cowl doors, and a variable fan nozzle. The element tests provided the mechanical properties used in the nacelle design. The subcomponent tests verified that the critical panel and joint areas of the nacelle had adequate structural integrity.
Meta-Analysis of the Reasoned Action Approach (RAA) to Understanding Health Behaviors.
McEachan, Rosemary; Taylor, Natalie; Harrison, Reema; Lawton, Rebecca; Gardner, Peter; Conner, Mark
2016-08-01
Reasoned action approach (RAA) includes subcomponents of attitude (experiential/instrumental), perceived norm (injunctive/descriptive), and perceived behavioral control (capacity/autonomy) to predict intention and behavior. To provide a meta-analysis of the RAA for health behaviors focusing on comparing the pairs of RAA subcomponents and differences between health protection and health-risk behaviors. The present research reports a meta-analysis of correlational tests of RAA subcomponents, examination of moderators, and combined effects of subcomponents on intention and behavior. Regressions were used to predict intention and behavior based on data from studies measuring all variables. Capacity and experiential attitude had large, and other constructs had small-medium-sized correlations with intention; all constructs except autonomy were significant independent predictors of intention in regressions. Intention, capacity, and experiential attitude had medium-large, and other constructs had small-medium-sized correlations with behavior; intention, capacity, experiential attitude, and descriptive norm were significant independent predictors of behavior in regressions. The RAA subcomponents have utility in predicting and understanding health behaviors.
Vandenbroucke, Loren; Verschueren, Karine; Ceulemans, Eva; De Smedt, Bert; De Roover, Kim; Baeyens, Dieter
2016-06-01
Executive functioning (EF), needed for goal-oriented behaviour, thoughts, and emotions, is important for various life domains. This study examined the relationship between family demographics and EF subcomponents. A kindergarten sample was tested on subcomponents of working memory, inhibition, and cognitive flexibility. Parents provided information on demographic variables. For 78 children both EF and demographic data were available. First, demographic profiles were identified within the sample. Two profiles were found: A low-risk profile of mainly two-biological-parent, high-income families with a highly educated mother who did not smoke during pregnancy and a high-risk profile of low-income families with a young, low-educated mother who more often smoked during pregnancy. Second, children with different demographic profiles were compared on EF subcomponents. Results indicate differential relations between family demographics and EF subcomponents: Whereas for most EF subcomponents no association with family demographics was found, high-risk children performed better on response shifting and tended to perform worse on verbal memory than low-risk children. Parenting stress decreased performance only for high-risk children. Although this study found limited impact of family demographics for EF, further longitudinal research can provide nuanced insights about which factors influence specific EF subcomponents during which developmental periods and guide targeted prevention of EF difficulties. © 2015 The British Psychological Society.
NASA Technical Reports Server (NTRS)
Raju, Ivatury S; Glaessgen, Edward H.; Mason, Brian H; Krishnamurthy, Thiagarajan; Davila, Carlos G
2005-01-01
A detailed finite element analysis of the right rear lug of the American Airlines Flight 587 - Airbus A300-600R was performed as part of the National Transportation Safety Board s failure investigation of the accident that occurred on November 12, 2001. The loads experienced by the right rear lug are evaluated using global models of the vertical tail, local models near the right rear lug, and a global-local analysis procedure. The right rear lug was analyzed using two modeling approaches. In the first approach, solid-shell type modeling is used, and in the second approach, layered-shell type modeling is used. The solid-shell and the layered-shell modeling approaches were used in progressive failure analyses (PFA) to determine the load, mode, and location of failure in the right rear lug under loading representative of an Airbus certification test conducted in 1985 (the 1985-certification test). Both analyses were in excellent agreement with each other on the predicted failure loads, failure mode, and location of failure. The solid-shell type modeling was then used to analyze both a subcomponent test conducted by Airbus in 2003 (the 2003-subcomponent test) and the accident condition. Excellent agreement was observed between the analyses and the observed failures in both cases. From the analyses conducted and presented in this paper, the following conclusions were drawn. The moment, Mx (moment about the fuselage longitudinal axis), has significant effect on the failure load of the lugs. Higher absolute values of Mx give lower failure loads. The predicted load, mode, and location of the failure of the 1985-certification test, 2003-subcomponent test, and the accident condition are in very good agreement. This agreement suggests that the 1985-certification and 2003- subcomponent tests represent the accident condition accurately. The failure mode of the right rear lug for the 1985-certification test, 2003-subcomponent test, and the accident load case is identified as a cleavage-type failure. For the accident case, the predicted failure load for the right rear lug from the PFA is greater than 1.98 times the limit load of the lugs. I.
Structural Analysis of the Right Rear Lug of American Airlines Flight 587
NASA Technical Reports Server (NTRS)
Raju, Ivatury S.; Glaessgen, Edward H.; Mason, Brian H.; Krishnamurthy, Thiagarajan; Davila, Carlos G.
2006-01-01
A detailed finite element analysis of the right rear lug of the American Airlines Flight 587 - Airbus A300-600R was performed as part of the National Transportation Safety Board s failure investigation of the accident that occurred on November 12, 2001. The loads experienced by the right rear lug are evaluated using global models of the vertical tail, local models near the right rear lug, and a global-local analysis procedure. The right rear lug was analyzed using two modeling approaches. In the first approach, solid-shell type modeling is used, and in the second approach, layered-shell type modeling is used. The solid-shell and the layered-shell modeling approaches were used in progressive failure analyses (PFA) to determine the load, mode, and location of failure in the right rear lug under loading representative of an Airbus certification test conducted in 1985 (the 1985-certification test). Both analyses were in excellent agreement with each other on the predicted failure loads, failure mode, and location of failure. The solid-shell type modeling was then used to analyze both a subcomponent test conducted by Airbus in 2003 (the 2003-subcomponent test) and the accident condition. Excellent agreement was observed between the analyses and the observed failures in both cases. The moment, Mx (moment about the fuselage longitudinal axis), has significant effect on the failure load of the lugs. Higher absolute values of Mx give lower failure loads. The predicted load, mode, and location of the failure of the 1985- certification test, 2003-subcomponent test, and the accident condition are in very good agreement. This agreement suggests that the 1985-certification and 2003-subcomponent tests represent the accident condition accurately. The failure mode of the right rear lug for the 1985-certification test, 2003-subcomponent test, and the accident load case is identified as a cleavage-type failure. For the accident case, the predicted failure load for the right rear lug from the PFA is greater than 1.98 times the limit load of the lugs.
ERIC Educational Resources Information Center
Wright, Logan; And Others
1992-01-01
A self-report measure for the Type A subcomponent of time urgency and perpetual activation (TUPA) was developed using 10 coronary heart disease (CHD) patients and validated with another 48 CHD patients. The internal consistency and test-retest reliabilities indicate that the instrument has clinical and research applications. (SLD)
NASA Technical Reports Server (NTRS)
Hunton, Lynn W.; James Harry A.
1948-01-01
Wind-tunnel tests of the McDonnell XP-85 airplane were conducted to determine its longitudinal, lateral, and directional stability and the characteristics of the aileron, the ruddervator, the leading-edge droop nose flap, and the stall control vanes. The directional stability of the airplane with numerous skyhook modifications and with a ventral fin was also investigated. The results of the tests showed that the effectiveness of the droop nose flaps and the stall control vanes was negligible with regard to either the maximum lift or longitudinal stability of the airplane. Contrary to any previous small-scale results, extension of the skyhook caused a 75-percent reduction in the directional stability of the airplane for both low and high values of lift coefficient. The simplest solution to the problem short of a major redesign of the skyhook appears to be the adoption of a ventral fin.
Thermally determining flow and/or heat load distribution in parallel paths
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chainer, Timothy J.; Iyengar, Madhusudan K.; Parida, Pritish R.
A method including obtaining calibration data for at least one sub-component in a heat transfer assembly, wherein the calibration data comprises at least one indication of coolant flow rate through the sub-component for a given surface temperature delta of the sub-component and a given heat load into said sub-component, determining a measured heat load into the sub-component, determining a measured surface temperature delta of the sub-component, and determining a coolant flow distribution in a first flow path comprising the sub-component from the calibration data according to the measured heat load and the measured surface temperature delta of the sub-component.
Thermally determining flow and/or heat load distribution in parallel paths
Chainer, Timothy J.; Iyengar, Madhusudan K.; Parida, Pritish R.
2016-12-13
A method including obtaining calibration data for at least one sub-component in a heat transfer assembly, wherein the calibration data comprises at least one indication of coolant flow rate through the sub-component for a given surface temperature delta of the sub-component and a given heat load into said sub-component, determining a measured heat load into the sub-component, determining a measured surface temperature delta of the sub-component, and determining a coolant flow distribution in a first flow path comprising the sub-component from the calibration data according to the measured heat load and the measured surface temperature delta of the sub-component.
Quiet Clean Short-haul Experimental Engine (QCSEE). Composite fan frame subsystem test report
NASA Technical Reports Server (NTRS)
Stotler, C. L., Jr.; Bowden, J. H.
1977-01-01
The element and subcomponent testing conducted to verify the composite fan frame design of two experimental high bypass geared turbofan engines and propulsion systems for short haul passenger aircraft is described. Emphasis is placed on the propulsion technology required for future externally blown flap aircraft with engines located both under the wing and over the wing, including technology in composite structures and digital engine controls. The element tests confirmed that the processes used in the frame design would produce the predicted mechanical properties. The subcomponent tests verified that the detail structural components of the frame had adequate structural integrity.
Thermo-mechanical evaluation of carbon-carbon primary structure for SSTO vehicles
NASA Astrophysics Data System (ADS)
Croop, Harold C.; Lowndes, Holland B.; Hahn, Steven E.; Barthel, Chris A.
1998-01-01
An advanced development program to demonstrate carbon-carbon composite structure for use as primary load carrying structure has entered the experimental validation phase. The component being evaluated is a wing torque box section for a single-stage-to-orbit (SSTO) vehicle. The validation or demonstration component features an advanced carbon-carbon design incorporating 3D woven graphite preforms, integral spars, oxidation inhibited matrix, chemical vapor deposited (CVD) oxidation protection coating, and ceramic matrix composite fasteners. The validation component represents the culmination of a four phase design and fabrication development effort. Extensive developmental testing was performed to verify material properties and integrity of basic design features before committing to fabrication of the full scale box. The wing box component is now being set up for testing in the Air Force Research Laboratory Structural Test Facility at Wright-Patterson Air Force Base, Ohio. One of the important developmental tests performed in support of the design and planned testing of the full scale box was the fabrication and test of a skin/spar trial subcomponent. The trial subcomponent incorporated critical features of the full scale wing box design. This paper discusses the results of the trial subcomponent test which served as a pathfinder for the upcoming full scale box test.
Aircraft Fault Detection Using Real-Time Frequency Response Estimation
NASA Technical Reports Server (NTRS)
Grauer, Jared A.
2016-01-01
A real-time method for estimating time-varying aircraft frequency responses from input and output measurements was demonstrated. The Bat-4 subscale airplane was used with NASA Langley Research Center's AirSTAR unmanned aerial flight test facility to conduct flight tests and collect data for dynamic modeling. Orthogonal phase-optimized multisine inputs, summed with pilot stick and pedal inputs, were used to excite the responses. The aircraft was tested in its normal configuration and with emulated failures, which included a stuck left ruddervator and an increased command path latency. No prior knowledge of a dynamic model was used or available for the estimation. The longitudinal short period dynamics were investigated in this work. Time-varying frequency responses and stability margins were tracked well using a 20 second sliding window of data, as compared to a post-flight analysis using output error parameter estimation and a low-order equivalent system model. This method could be used in a real-time fault detection system, or for other applications of dynamic modeling such as real-time verification of stability margins during envelope expansion tests.
X-37 and Our Future in Space: Breaking Barriers to Achieve New Milestones in Space Settlement
NASA Technical Reports Server (NTRS)
Sexton, Jeff
2003-01-01
The X-37 flight demonstrator will serve as a testbed and technology demonstrator for a variety of aerospace technologies needed to produce a successor to the Space Shuttle. Lithium-ion (Li-ion) batteries, thermal protection systems, and hot structures such as flaperons and ruddervators are systems onboard the X-37 which will be of particular use to this effort. This viewgraph presentation identifies stakeholders and participants in the X-37 flight demonstrator program and includes a section of notes which correspond to each of its slides.
Chapman, Benjamin P.
2012-01-01
Many users of the NEO-Five Factor Inventory (NEO-FFI; Costa & McCrae, 1992) are unaware that Saucier (1998) developed item cluster subcomponents for each broad domain of the instrument similar to the facets of the Revised NEO Personality Inventory (Costa & McCrae, 1992). In this study, I examined the following: the replicability of the subcomponents in young adult university and middle-aged community samples; whether item keying accounted for additional covariance among items; subcomponent correlations with a measure of socially desirable responding; subcomponent reliabilities; and subcomponent discriminant validity with respect to age-relevant criterion items expected to reflect varying associations with broad and narrow traits. Confirmatory factor analyses revealed that all subcomponents were recoverable across samples and that the addition of method factors representing positive and negative item keying improved model fit. The subcomponents correlated no more with a measure of socially desirable responding than their parent domains and showed good average reliability. Correlations with criterion items suggested that subcomponents may prove useful in specifying which elements of NEO-FFI domains are more or less related to variables of interest. I discuss their use for enhancing the precision of findings obtained with NEO-FFI domain scores. PMID:17437386
Executive Function Subcomponents and their Relations to Everyday Functioning in Healthy Older Adults
McAlister, Courtney; Schmitter-Edgecombe, Maureen
2016-01-01
Everyday functioning and its executive functioning cognitive correlates (i.e., switching, inhibition, and updating) were investigated in healthy older adults (HOAs) using multiple methods of functional status. In addition to whether computerized experimental tasks would better dissociate these subcomponents than neuropsychological measures of executive functioning, we were also interested in the contributions of both experimental and neuropsychological measures of executive function subcomponents to functional abilities. Seventy HOAs (45 young-old and 25 old-old) and 70 younger adults completed executive function and neuropsychological tests. In addition to self- and informant questionnaires of functional abilities, HOAs completed two performance-based measures. An aging effect was found on all executive function measures. Old-old older adults and their informants did not report more functional difficulties but demonstrated more difficulties on performance-based measures relative to young-old participants. For the HOAs, after controlling for age and education, the neuropsychological measures of executive functioning, but not experimental measures, explained a significant amount of variance in the informant-report and both performance-based measures. Updating measures differentially predicted performance-based measures, while switching was important for questionnaire and performance-based measures. The contribution of executive functioning to functional status when measured with experimental measures specifically designed to isolate the executive subcomponent was not as strong as hypothesized. Further research examining the value of isolating executive function subcomponents in neuropsychological assessment and the prediction of functional abilities in older adults is warranted. PMID:27206842
McAlister, Courtney; Schmitter-Edgecombe, Maureen
2016-10-01
Everyday functioning and its executive functioning cognitive correlates (i.e., switching, inhibition, and updating) were investigated in healthy older adults (HOAs) using multiple methods of functional status. In addition to whether computerized experimental tasks would better dissociate these subcomponents than neuropsychological measures of executive functioning, we were also interested in the contributions of both experimental and neuropsychological measures of executive function subcomponents to functional abilities. Seventy HOAs (45 young-old and 25 old-old) and 70 younger adults completed executive function and neuropsychological tests. In addition to self- and informant questionnaires of functional abilities, HOAs completed two performance-based measures. An aging effect was found on all executive function measures. Old-old older adults and their informants did not report more functional difficulties but demonstrated more difficulties on performance-based measures than did young-old participants. For the HOAs, after controlling for age and education, the neuropsychological measures of executive functioning, but not experimental measures, explained a significant amount of variance in the informant-report and both performance-based measures. Updating measures differentially predicted performance-based measures, while switching was important for questionnaire and performance-based measures. The contribution of executive functioning to functional status when measured with experimental measures specifically designed to isolate the executive subcomponent was not as strong as hypothesized. Further research examining the value of isolating executive function subcomponents in neuropsychological assessment and the prediction of functional abilities in older adults is warranted.
Gatt, Justine M; Burton, Karen L O; Schofield, Peter R; Bryant, Richard A; Williams, Leanne M
2014-09-30
Mental health is not simply the absence of mental illness; rather it is a distinct entity representing wellness. Models of wellbeing have been proposed that emphasize components of subjective wellbeing, psychological wellbeing, or a combination of both. A new 26-item scale of wellbeing (COMPAS-W) was developed in a cohort of 1669 healthy adult twins (18-61 years). The scale was derived using factor analysis of multiple scales of complementary constructs and confirmed using tests of reliability and convergent validity. Bivariate genetic modeling confirmed its heritability. From an original 89 items we identified six independent subcomponents that contributed to wellbeing. The COMPAS-W scale and its subcomponents showed construct validity against psychological and physical health behaviors, high internal consistency (average r=0.71, Wellbeing r=0.84), and 12-month test-retest reliability (average r=0.62, Wellbeing r=0.82). There was a moderate contribution of genetics to total Wellbeing (heritability h(2)=48%) and its subcomponents: Composure (h(2)=24%), Own-worth (h(2)=42%), Mastery (h(2)=40%), Positivity (h(2)=42%), Achievement (h(2)=32%) and Satisfaction (h(2)=43%). Multivariate genetic modeling indicated genetic variance was correlated across the scales, suggesting common genetic factors contributed to Wellbeing and its subcomponents. The COMPAS-W scale provides a validated indicator of wellbeing and offers a new tool to quantify mental health. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.
2014-01-01
The measured aerodynamic performance of a compact, high work factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90-bend, and exit guide vane (EGV), is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level are reported for operation between 70 to 105 of design corrected speed, with subcomponent (impeller, diffuser, and exitguide-vane) detailed flow field measurements presented and discussed at the 100 design-speed condition. Individual component losses from measurements are compared with pre-test predictions on a limited basis.
Newman, Mark A; Hirsch, Mark A; Peindl, Richard D; Habet, Nahir A; Tsai, Tobias J; Runyon, Michael S; Huynh, Toan; Zheng, Nigel
2018-06-01
Studies have evaluated the test-re-test reliability of subcomponents of the timed up and-go test in adults by using body-worn inertial sensors. However, studies in children have not been reported in the literature. To evaluate the within-session reliability of subcomponents of a newly developed electronically augmented timed 'upand-go' test (EATUG) in ambulatory children with traumatic brain injury (TBI) and children with typical development (TD). The timed up and go test was administered to twelve consecutive ambulatory children with moderate to severe TBI (6 males and 6 females, age 10.5 ± 1.5 years, range 8-13 years, during inpatient rehabilitation at 27.0 ± 11.8 days following injury) and 10 TD age and sex-matched children (5 males and 5 females, 10.4 ± 1.3 years, range 8-11 years). Participants wore a single chest-mounted inertial measurement sensor package with custom software that measured angular and acceleration velocity and torso flexion and extension angles, while they performed 6 trials of the EATUG test. Measures were derived from the overall time to complete the TUG test, angular velocity and angular displacement data for torso flexion and extension during sit-to-stand and stand-to-sit segments and both mean and peak angular velocities for two turning segments (i.e. turning around a cone and turning-before-sitting). Within-session reliability of the subcomponents of the TUG test for children with TBI assessed by the intra-class correlation coefficient was ICC (1,1) = 0.84, (range 0.82-0.96), and for TD children ICC (1,1) = 0.73, (range 0.53-0.89). Scores on Total Time, maximum torso flexion/extension angle and peak flexion angular velocity during sit-tostand, and peak turn angular velocity for both turns around the cone and turns before sitting were lower for children with TBI than for TD children (p ≤ 0.05). The EATUG test is a reliable measure of physical function in children with TBI who are being discharged from inpatient rehabilitation. Copyright © 2018 Elsevier B.V. All rights reserved.
Influence of trait empathy on the emotion evoked by sad music and on the preference for it.
Kawakami, Ai; Katahira, Kenji
2015-01-01
Some people experience pleasant emotion when listening to sad music. Therefore, they can enjoy listening to it. In the current study, we aimed to investigate such apparently paradoxical emotional mechanisms and focused on the influence of individuals' trait empathy, which has been reported to associate with emotional responses to sad music and a preference for it. Eighty-four elementary school children (42 males and 42 females, mean age 11.9 years) listened to two kinds of sad music and rated their emotional state and liking toward them. In addition, trait empathy was assessed using the Interpersonal Reactivity Index scale, which comprises four sub-components: Empathic Concern, Personal Distress, Perspective Taking, and Fantasy (FS). We conducted a path analysis and tested our proposed model that hypothesized that trait empathy and its sub-components would affect the preference for sad music directly or indirectly, mediated by the emotional response to the sad music. Our findings indicated that FS, a sub-component of trait empathy, was directly associated with liking sad music. Additionally, perspective taking ability, another sub-component of trait empathy, was correlated with the emotional response to sad music. Furthermore, the experience of pleasant emotions contributed to liking sad music.
Influence of trait empathy on the emotion evoked by sad music and on the preference for it
Kawakami, Ai; Katahira, Kenji
2015-01-01
Some people experience pleasant emotion when listening to sad music. Therefore, they can enjoy listening to it. In the current study, we aimed to investigate such apparently paradoxical emotional mechanisms and focused on the influence of individuals’ trait empathy, which has been reported to associate with emotional responses to sad music and a preference for it. Eighty-four elementary school children (42 males and 42 females, mean age 11.9 years) listened to two kinds of sad music and rated their emotional state and liking toward them. In addition, trait empathy was assessed using the Interpersonal Reactivity Index scale, which comprises four sub-components: Empathic Concern, Personal Distress, Perspective Taking, and Fantasy (FS). We conducted a path analysis and tested our proposed model that hypothesized that trait empathy and its sub-components would affect the preference for sad music directly or indirectly, mediated by the emotional response to the sad music. Our findings indicated that FS, a sub-component of trait empathy, was directly associated with liking sad music. Additionally, perspective taking ability, another sub-component of trait empathy, was correlated with the emotional response to sad music. Furthermore, the experience of pleasant emotions contributed to liking sad music. PMID:26578992
NASA Technical Reports Server (NTRS)
Sheffler, K. D.; Jackson, J. J.
1976-01-01
Thermomechanical fatigue (TMF) and root subcomponent tensile, creep, and low cycle fatigue (LCF) tests were conducted to determine the capability of a fully lamellar directionally solidified eutectic alloy to sustain the airfoil thermal fatigue and root attachment loads anticipated in advanced, hollow, high work turbine blades. A three dimensional finite element elastic stress analysis was performed on typical advanced hollow eutectic airfoil and root-platform designs to determine appropriate conditions for these tests. Results of TMF tests conducted on longitudinal specimens (stress axis parallel to the solidification direction) containing a simulated leading edge cooling hole pattern indicated the longitudinal TMF properties to be more than adequate for the particular advanced hollow blade analyzed, with the strain range for a 10,000 cycle life being more than 50% above the maximum strain range calculated for the advanced hollow blade.
NASA Technical Reports Server (NTRS)
Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.
2015-01-01
The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90deg-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105 percent of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100 percent design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.
NASA Technical Reports Server (NTRS)
Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.
2014-01-01
The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90º-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105% of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100% design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.
Learning STEM Through Integrative Visual Representations
NASA Astrophysics Data System (ADS)
Virk, Satyugjit Singh
Previous cognitive models of memory have not comprehensively taken into account the internal cognitive load of chunking isolated information and have emphasized the external cognitive load of visual presentation only. Under the Virk Long Term Working Memory Multimedia Model of cognitive load, drawing from the Cowan model, students presented with integrated animations of the key neural signal transmission subcomponents where the interrelationships between subcomponents are visually and verbally explicit, were hypothesized to perform significantly better on free response and diagram labeling questions, than students presented with isolated animations of these subcomponents. This is because the internal attentional cognitive load of chunking these concepts is greatly reduced and hence the overall cognitive load is less for the integrated visuals group than the isolated group, despite the higher external load for the integrated group of having the interrelationships between subcomponents presented explicitly. Experiment 1 demonstrated that integrating the subcomponents of the neuron significantly enhanced comprehension of the interconnections between cellular subcomponents and approached significance for enhancing comprehension of the layered molecular correlates of the cellular structures and their interconnections. Experiment 2 corrected time on task confounds from Experiment 1 and focused on the cellular subcomponents of the neuron only. Results from the free response essay subcomponent subscores did demonstrate significant differences in favor of the integrated group as well as some evidence from the diagram labeling section. Results from free response, short answer and What-If (problem solving), and diagram labeling detailed interrelationship subscores demonstrated the integrated group did indeed learn the extra material they were presented with. This data demonstrating the integrated group learned the extra material they were presented with provides some initial support for the assertion that chunking mediated the greater gains in learning for the neural subcomponent concepts over the control.
Components of sustainability considerations in management of petrochemical industries.
Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah
2017-06-01
Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.
NASA Technical Reports Server (NTRS)
Melis, Matthew E.; Brand, Jeremy H.; Pereira, J. Michael; Revilock, Duane M.
2007-01-01
Following the tragedy of the Space Shuttle Columbia on February 1, 2003, a major effort commenced to develop a better understanding of debris impacts and their effect on the Space Shuttle subsystems. An initiative to develop and validate physics-based computer models to predict damage from such impacts was a fundamental component of this effort. To develop the models it was necessary to physically characterize Reinforced Carbon-Carbon (RCC) and various debris materials which could potentially shed on ascent and impact the Orbiter RCC leading edges. The validated models enabled the launch system community to use the impact analysis software LS DYNA to predict damage by potential and actual impact events on the Orbiter leading edge and nose cap thermal protection systems. Validation of the material models was done through a three-level approach: fundamental tests to obtain independent static and dynamic material model properties of materials of interest, sub-component impact tests to provide highly controlled impact test data for the correlation and validation of the models, and full-scale impact tests to establish the final level of confidence for the analysis methodology. This paper discusses the second level subcomponent test program in detail and its application to the LS DYNA model validation process. The level two testing consisted of over one hundred impact tests in the NASA Glenn Research Center Ballistic Impact Lab on 6 by 6 in. and 6 by 12 in. flat plates of RCC and evaluated three types of debris projectiles: BX 265 External Tank foam, ice, and PDL 1034 External Tank foam. These impact tests helped determine the level of damage generated in the RCC flat plates by each projectile. The information obtained from this testing validated the LS DYNA damage prediction models and provided a certain level of confidence to begin performing analysis for full-size RCC test articles for returning NASA to flight with STS 114 and beyond.
(NESC) NASA Engineering and Safety Center Orion Heat Shield Carr
2014-04-29
(NESC) NASA Engineering and Safety Center Orion Heat Shield Carrier Structure: Titanium Orthogrid heat shield sub-component dynamic test article : person in the photo Jim Jeans (Background: Mike Kirsch, James Ainsworth)
Impact Testing of Composites for Aircraft Engine Fan Cases
NASA Technical Reports Server (NTRS)
Roberts, Gary D.; Revilock, Duane M.; Binienda, Wieslaw K.; Nie, Walter Z.; Mackenzie, S. Ben; Todd, Kevin B.
2001-01-01
Before composite materials can be considered for use in the fan case of a commercial jet engine, the performance of a composite structure under blade-out loads needs to be demonstrated. The objective of this program is to develop an efficient test and analysis method for evaluating potential composite case concepts. Ballistic impact tests were performed on laminated glass/epoxy composites in order to identify potential failure modes and to provide data for analysis. Flat 7x7 in. panels were impacted with cylindrical titanium projectiles, and 15 in. diameter half-rings were impacted with wedge-shaped titanium projectiles. Composite failure involved local fiber fracture as well as tearing and delamination on a larger scale. A 36 in. diameter full-ring subcomponent was proposed for larger scale testing. Explicit, transient, finite element analyses were used to evaluate impact dynamics and subsequent global deformation for the proposed full-ring subcomponent test. Analyses on half-ring and quarter ring configurations indicated that less expensive smaller scale tests could be used to screen potential composite concepts when evaluation of local impact damage is the primary concern.
SEM probe of IC radiation sensitivity
NASA Technical Reports Server (NTRS)
Gauthier, M. K.; Stanley, A. G.
1979-01-01
Scanning Electron Microscope (SEM) used to irradiate single integrated circuit (IC) subcomponent to test for radiation sensitivity can localize area of IC less than .03 by .03 mm for determination of exact location of radiation sensitive section.
Critical joints in large composite aircraft structure
NASA Technical Reports Server (NTRS)
Nelson, W. D.; Bunin, B. L.; Hart-Smith, L. J.
1983-01-01
A program was conducted at Douglas Aircraft Company to develop the technology for critical structural joints of composite wing structure that meets design requirements for a 1990 commercial transport aircraft. The prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Ancillary testing of 180 specimens generated data on strength and load-deflection characteristics which provided input to the joint analysis. Load-sharing between fasteners in multirow bolted joints was computed by the nonlinear analysis program A4EJ. This program was used to predict strengths of 20 additional large subcomponents representing strips from a wing root chordwise splice. In most cases, the predictions were accurate to within a few percent of the test results. In some cases, the observed mode of failure was different than anticipated. The highlight of the subcomponent testing was the consistent ability to achieve gross-section failure strains close to 0.005. That represents a considerable improvement over the state of the art.
Wiklund-Hörnqvist, Carola; Jonsson, Bert; Korhonen, Johan; Eklöf, Hanna; Nyroos, Mikaela
2016-01-01
The aim with the present study was to examine the relationship between the subcomponents in working memory (WM) and mathematical performance, as measured by the National tests in a sample of 597 Swedish third-grade pupils. In line with compelling evidence of other studies, individual differences in WM capacity significantly predicted mathematical performance. Dividing the sample into four groups, based on their mathematical performance, revealed that mathematical ability can be conceptualized in terms of different WM profiles. Pupils categorized as High-math performers particularly differed from the other three groups in having a significant higher phonological ability. In contrast, pupils categorized as Low-math performers were particularly characterized by having a significant lower visuo-spatial ability. Findings suggest that it is important for educators to recognize and acknowledge individual differences in WM to support mathematical achievement at an individual level. PMID:27486413
Application of Component Scoring to a Complicated Cognitive Domain.
ERIC Educational Resources Information Center
Tatsuoka, Kikumi K.; Yamamoto, Kentaro
This study used the Montague-Riley Test to introduce a new scoring procedure that revealed errors in cognitive processes occurring at subcomponents of an electricity problem. The test, consisting of four parts with 36 open-ended problems each, was administered to 250 high school students. A computer program, ELTEST, was written applying a…
Fuller, G W; Govind, O; Tucker, R; Raftery, M
2018-04-01
To establish normative reference data for the SCAT3 in professional Rugby Union players. A cross sectional study in professional Rugby Union players competing in national and international professional competitions between 2015 and 2016. The SCAT3 was administered pre-season or prior to tournaments. Data was collected electronically using a custom tablet application. SCAT3 subcomponents distributions were described and normative ranges determined using percentile cut-offs for average, unusually low/high, and extremely low/high scores. The association between player characteristics and performance in SCAT3 subcomponents was also investigated in exploratory analyses. A total of 3611 professional Rugby Union players were included. The most common baseline symptom was fatigue (14%). The symptom score median (md) was 0 (interquartile range (IQR)=0-1). Symptom severity md was 0 (IQR=0-1). The md of the SAC score was 28 (IQR=26-29). The md of the MBESS was 2 (IQR=0-4). The Tandem gait md was 11.1s (IQR=10.0-12.7s). Upper limb coordination was normal in 98.4%. Younger age and lower educational level were associated with worse performance on delayed recall and reverse month sub-components of the SCAT3 (p<0.0001). No statistically significant differences in SCAT3 subcomponents were evident across gender. Representative normative reference values for the SCAT3 among professional Rugby Union players are provided. Baseline performance on concentration and delayed recall tests may be lower in younger athletes or in those with lower educational level. Copyright © 2017. Published by Elsevier Ltd.
Subcomponent tests for composite fuselage technology readiness
NASA Technical Reports Server (NTRS)
Madan, R. C.; Hawley, A. V.
1989-01-01
An account is given of a NASA research effort aimed at the development of an all-composite transport aircraft fuselage incorporating joints and cutouts which meets all design requirements. The design, construction, and analysis activities associated with the 30-ft-long fuselage section gave attention to critically important subcomponent specimens, including shear-tee pulloff specimens, stiffened and unstiffened cutout panels, longitudinal and transverse skin splices, longeron runouts, transverse skin-longerons, stiffened shear panels, and window belt panels. The analysis of large cutouts was conducted with coupling FEM analyses incorporating accurate failure criteria for tension and shear; the strategic application of S2 glass fiber plies around cutouts was demonstrated both analytically and experimentally to increase load capacity with virtually no weight penalty.
NASA Technical Reports Server (NTRS)
Shastry, Rohit; Herman, Daniel Andrew; Soulas, George C.; Patterson, Michael J.
2014-01-01
This presentation describes results from the end-of-test performance characterization of NASA's Evolutionary Xenon Thruster (NEXT) Long-Duration Test (LDT). Sub-component performance as well as overall thruster performance is presented and compared to results over the course of the test. Overall wear of critical thruster components is also described, and an update on the first failure mode of the thruster is provided.
Zhang, Ting; Chen, Lingyan; Wang, Yu; Zhang, Mengmeng; Wang, Lanlan; Xu, Xiangjun; Xiao, Gairong; Chen, Jing; Shen, Yeru; Zhou, Nong
2018-02-01
Epilepsy is a common neurological disorder with a core feature of cognitive impairments. Previous studies showed that patients with focal epilepsy have deficits in both theory of mind (ToM) and executive function (EF). However, there are few studies of ToM in patients with idiopathic generalized epilepsy (IGE), especially in populations with pediatric epilepsy. The aim of this study was to examine the characteristics of ToM and EF, including some of their subcomponents, and explore the relationship between them in Chinese children with IGE. We recruited 54 children and adolescents with IGE as the experimental subjects and 37 typically developing children and adolescents as control subjects. Both groups completed ToM tests, namely, second-order false belief tasks (FBTs) and faux pas tasks (FPTs). Their caregivers completed the Behavior Rating Inventory of Executive Function (BRIEF) at the same time. Children and adolescents with IGE displayed worse performance on some of the FBTs and FPTs than healthy controls (p<0.01). They also exhibited widespread EF deficits, comprising eight subcomponents (p<0.05). Pearson's correlation analysis revealed that several subcomponents of EF (inhibition, emotional control, initiation, working memory, and monitoring) were unequally correlated with FBT and FPT. Regression analysis showed that ToM had associations with inhibition, working memory, and duration of seizures. Analysis of variance (ANOVA) indicated that children with newly diagnosed epilepsy displayed significant deficits in FBT, FPT, and distinct subscales of EF. Our results revealed significant impairments in ToM and EF in children and adolescents with IGE compared with healthy controls. We found significant correlations between ToM and two subcomponents of EF (inhibition and working memory) in children with IGE. Additionally, the duration of seizures affected ToM in patients but was a less powerful predictor than the two subcomponents of EF. Even for children with new-onset seizures and without medication, the deficits in ToM and some distinct subscales of EF were apparent. This result has clinical implications for both nonpharmaceutical therapies and cognitive rehabilitation. Copyright © 2017 Elsevier Inc. All rights reserved.
Franklin, Rebecca A; Butler, Michael P; Bentley, Jacob A
2018-08-01
Yoga contains sub-components related to its physical postures (asana), breathing methods (pranayama), and meditation (dhyana). To test the hypothesis that specific yoga practices are associated with reduced psychological distress, 186 adults completed questionnaires assessing life stressors, symptom severity, and experience with each of these aspects of yoga. Each yoga sub-component was found to be negatively correlated with psychological distress indices. However, differing patterns of relationship to psychological distress symptoms were found for each yoga sub-component. Experience with asana was negatively correlated with global psychological distress (r = -.21, p < .01), and symptoms of anxiety (r = -.18, p = .01) and depression (r = -.17, p = .02). These relationships remained statistically significant after accounting for variance attributable to Social Readjustment Rating Scale scores (GSI: r = -.19, p = .01; BSI Anxiety: r = -.16, p = .04; BSI Depression: r = -.14, p = .05). By contrast, the correlations between other yoga sub-components and symptom subscales became non-significant after accounting for exposure to life stressors. Moreover, stressful life events moderated the predictive relationship between amount of asana experience and depressive symptoms. Asana was not related to depressive symptoms at low levels of life stressors, but became associated at mean (t[182] = -2.73, p < .01) and high levels (t[182] = -3.56, p < .001). Findings suggest asana may possess depressive symptom reduction benefits, particularly as life stressors increase. Additional research is needed to differentiate whether asana has an effect on psychological distress, and to better understand potential psychophysiological mechanisms of action.
Residential solar-heating/cooling system
NASA Technical Reports Server (NTRS)
1980-01-01
Report documents progress of residential solar-heating and cooling system development program at 5-month mark of anticipated 17-month program. System design has been completed, and development and component testing has been initiated. Report includes diagrams, operation overview, optimization studies of subcomponents, and marketing plans for system.
33 CFR 159.75 - Overcurrent protection.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Overcurrent protection. 159.75...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.75 Overcurrent protection. Overcurrent protection must be provided within the unit to protect subcomponents of the device if the...
NASA Astrophysics Data System (ADS)
Hernandez Mendez, Arturo
Collaborative inquiry within undergraduate research experiences (UREs) is an effective curriculum tool to support student growth. This study seeks to understand how collaborative inquiry within undergraduate biology student experiences are affected within faculty mentored experiences and non-mentored experiences at a large private southeastern university. Undergraduate biology students engaged in UREs (faculty as mentor and non-mentor experiences) were examined for statistically significant differences in student self-efficacy. Self-efficacy was measured in three subcomponents (thinking and working like a scientist, scientific self-efficacy, and scientific identity) from student responses obtained in an online survey. Responses were analyzed using a nonparametric equivalent of a t test (Mann Whitney U test) to make comparisons between faculty mentored and non-mentored student groups. The conclusions of this study highlight the statistically significant effect of faculty mentoring in all three subcomponents. Faculty and university policy makers can apply these findings to develop further support for effective faculty mentoring practices in UREs.
NASA Technical Reports Server (NTRS)
Handschuh, Katherine M.; Miller, Sandi G.; Sinnott, Matthew J.; Kohlman, Lee W.; Roberts, Gary D.; Pereira, J. Michael; Ruggeri, Charles R.
2014-01-01
Application of polymer matrix composite materials for jet engine fan blades is becoming attractive as an alternative to metallic blades; particularly for large engines where significant weight savings are recognized on moving to a composite structure. However, the weight benefit of the composite of is offset by a reduction of aerodynamic efficiency resulting from a necessary increase in blade thickness; relative to the titanium blades. Blade dimensions are largely driven by resistance to damage on bird strike. Further development of the composite material is necessary to allow composite blade designs to approximate the dimensions of a metallic fan blade. The reduction in thickness over the state of the art composite blades is expected to translate into structural weight reduction, improved aerodynamic efficiency, and therefore reduced fuel consumption. This paper presents test article design, subcomponent blade leading edge fabrication, test method development, and initial results from ballistic impact of a gelatin projectile on the leading edge of composite fan blades. The simplified test article geometry was developed to realistically simulate a blade leading edge while decreasing fabrication complexity. Impact data is presented on baseline composite blades and toughened blades; where a considerable improvement to impact resistance was recorded.
NASA Technical Reports Server (NTRS)
Miller, Sandi G.; Handschuh, Katherine; Sinnott, Matthew J.; Kohlman, Lee W.; Roberts, Gary D.; Martin, Richard E.; Ruggeri, Charles R.; Pereira, J. Michael
2015-01-01
Application of polymer matrix composite materials for jet engine fan blades is becoming attractive as an alternative to metallic blades; particularly for large engines where significant weight savings are recognized on moving to a composite structure. However, the weight benefit of the composite is offset by a reduction of aerodynamic efficiency resulting from a necessary increase in blade thickness; relative to the titanium blades. Blade dimensions are largely driven by resistance to damage on bird strike. Further development of the composite material is necessary to allow composite blade designs to approximate the dimensions of a metallic fan blade. The reduction in thickness over the state of the art composite blades is expected to translate into structural weight reduction, improved aerodynamic efficiency, and therefore reduced fuel consumption. This paper presents test article design, subcomponent blade leading edge fabrication, test method development, and initial results from ballistic impact of a gelatin projectile on the leading edge of composite fan blades. The simplified test article geometry was developed to realistically simulate a blade leading edge while decreasing fabrication complexity. Impact data is presented on baseline composite blades and toughened blades; where a considerable improvement to impact resistance was recorded.
Capability and flight record of the versatile space shuttle OMS engine
NASA Astrophysics Data System (ADS)
Judd, D. Craig
The development contract for Aerojet's Orbital Manuevering Subsystem (OMS) engine was awarded in February 1974. This paper provides a description of the OMS subcomponents along with a summary of the OMS development program and subsequent flight record. The major subcomponents include the platelet injector, regeneratively cooled chamber, radiation cooled nozzle extension, bipropellant valve, thrust mount, gimbal actuator assembly, and propellant feedlines. The OMS engine underwent an extensive development program between 1974 and 1978 that included approximately 3680 tests performed on 21 separate engines on components for a total duration of more than 19,000 seconds. This was followed with qualification testing of two engines with another 521 tests and 18,504 seconds of hot fire testing. The Space Shuttle system has completed 45 orbital flights with the OMS engines having fired a total of 356 times with a cumulative duration of 38,094 seconds. In all cases, the OMS engine has performed as required because of its maturity, simplicity, and built-in redundancy. Also described are the results of studies performed to increase the performance of the OMS engine either by using LOX/hydrocarbon propellants or by converting to a pump fed system to increase chamber pressure and area ratio.
Tetteh, Kevin K A; Conway, David J
2011-10-13
Merozoite surface protein 1 (MSP1) of Plasmodium falciparum has been implicated as an important target of acquired immunity, and candidate components for a vaccine include polymorphic epitopes in the N-terminal polymorphic block 2 region. We designed a polyvalent hybrid recombinant protein incorporating sequences of the three major allelic types of block 2 together with a composite repeat sequence of one of the types and N-terminal flanking T cell epitopes, and compared this with a series of recombinant proteins containing modular sub-components and similarly expressed in Escherichia coli. Immunogenicity of the full polyvalent hybrid protein was tested in both mice and rabbits, and comparative immunogenicity studies of the sub-component modules were performed in mice. The full hybrid protein induced high titre antibodies against each of the major block 2 allelic types expressed as separate recombinant proteins and against a wide range of allelic types naturally expressed by a panel of diverse P. falciparum isolates, while the sub-component modules had partial antigenic coverage as expected. This encourages further development and evaluation of the full MSP1 block 2 polyvalent hybrid protein as a candidate blood-stage component of a malaria vaccine. Copyright © 2011 Elsevier Ltd. All rights reserved.
TNX GeoSiphon Cell (TGSC-1) Phase II Single Cell Deployment/Demonstration Final Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Phifer, M.A.
1999-04-15
This Phase II final report documents the Phase II testing conducted from June 18, 1998 through November 13, 1998, and it focuses on the application of the siphon technology as a sub-component of the overall GeoSiphon Cell technology. [Q-TPL-T-00004
Health monitoring display system for a complex plant
Ridolfo, Charles F [Bloomfield, CT; Harmon, Daryl L [Enfield, CT; Colin, Dreyfuss [Enfield, CT
2006-08-08
A single page enterprise wide level display provides a comprehensive readily understood representation of the overall health status of a complex plant. Color coded failure domains allow rapid intuitive recognition of component failure status. A three-tier hierarchy of displays provide details on the health status of the components and systems displayed on the enterprise wide level display in a manner that supports a logical drill down to the health status of sub-components on Tier 1 to expected faults of the sub-components on Tier 2 to specific information relative to expected sub-component failures on Tier 3.
Hau, Janice; Sarubbo, Silvio; Houde, Jean Christophe; Corsini, Francesco; Girard, Gabriel; Deledalle, Charles; Crivello, Fabrice; Zago, Laure; Mellet, Emmanuel; Jobard, Gaël; Joliot, Marc; Mazoyer, Bernard; Tzourio-Mazoyer, Nathalie; Descoteaux, Maxime; Petit, Laurent
2017-05-01
Despite its significant functional and clinical interest, the anatomy of the uncinate fasciculus (UF) has received little attention. It is known as a 'hook-shaped' fascicle connecting the frontal and anterior temporal lobes and is believed to consist of multiple subcomponents. However, the knowledge of its precise connectional anatomy in humans is lacking, and its subcomponent divisions are unclear. In the present study, we evaluate the anatomy of the UF and provide its detailed normative description in 30 healthy subjects with advanced particle-filtering tractography with anatomical priors and robustness to crossing fibers with constrained spherical deconvolution. We extracted the UF by defining its stem encompassing all streamlines that converge into a compact bundle, which consisted not only of the classic hook-shaped fibers, but also of straight horizontally oriented. We applied an automatic-clustering method to subdivide the UF bundle and revealed five subcomponents in each hemisphere with distinct connectivity profiles, including different asymmetries. A layer-by-layer microdissection of the ventral part of the external and extreme capsules using Klingler's preparation also demonstrated five types of uncinate fibers that, according to their pattern, depth, and cortical terminations, were consistent with the diffusion-based UF subcomponents. The present results shed new light on the UF cortical terminations and its multicomponent internal organization with extended cortical connections within the frontal and temporal cortices. The different lateralization patterns we report within the UF subcomponents reconcile the conflicting asymmetry findings of the literature. Such results clarifying the UF structural anatomy lay the groundwork for more targeted investigations of its functional role, especially in semantic language processing.
Piolino, Pascale; Lamidey, Virginie; Desgranges, Béatrice; Eustache, Francis
2007-01-01
Fifty-two subjects between ages 40 and 79 years were administered a questionnaire assessing their ability to recall semantic information about famous people from 4 different decades and to recollect its episodic source of acquisition together with autonoetic consciousness via the remember-know paradigm. In addition, they underwent a battery of standardized neuropsychological tests to assess episodic and semantic memory and executive functions. The analyses of age reveal differences for the episodic source score but no differences between age groups for the semantic scores within each decade. Regardless of the age of people, the analyses also show that semantic memory subcomponents of the famous person test are highly associated with each other as well as with the source component. The recall of semantic information on the famous person test relies on participants' semantic abilities, whereas the recall of its episodic source depends on their executive functions. The present findings confirm the existence of an episodic-semantic distinction in knowledge about famous people. They provide further evidence that personal source and semantic information are at once distinct and highly interactive within the framework of remote memory. (c) 2007 APA, all rights reserved.
Valkonen, Harri; Lindfors, Olavi; Knekt, Paul
2012-12-30
The level of personality functioning, relevant for treatment planning, can be evaluated by the Rorschach Comprehensive System (CS) Ego Impairment Index-2 (EII-2) and by interview assessment of the severity of personality pathology. However, few studies on the association between these assessment methods have been reported. This study examines the strength of association between the EII-2 and its subcomponents with the interview-based Level of Personality Organization (LPO) assessment scale, and investigates their mutual associations with psychiatric symptoms, diagnoses, and history. Altogether, 315 mood or anxiety disorder outpatients without severe personality pathology were assessed with the LPO and tested with the CS, on which the EII-2 and its subcomponents (FQ-, WSum6, Critical contents, M-, PHR, GHR, and R) were calculated. Significant, but weak association between the EII-2 and the LPO was found. The WSum6, a measure of thought disorder, was the only EII-2 subcomponent significantly associated with the LPO. Both measures were consistently associated with psychiatric symptoms, diagnoses and history. The findings partially support the EII-2 and the LPO as consistently associated, relatively independent measures of the severity of personality pathology. More research on the incremental benefits of the measures is needed in clinical populations, covering non-severe and complex psychopathology. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Evidence for Different Components in Children's Visuospatial Working Memory
ERIC Educational Resources Information Center
Mammarella, Irene C.; Pazzaglia, Francesca; Cornoldi, Cesare
2008-01-01
There are a large number of studies demonstrating that visuospatial working memory (VSWM) involves different subcomponents, but there is no agreement on the identity of these dimensions. The present study attempts to combine different theoretical accounts by measuring VSWM. A battery composed of 13 tests was used to assess working memory and, in…
Internal Fine Structure of Ellerman Bombs
NASA Astrophysics Data System (ADS)
Hashimoto, Yuki; Kitai, Reizaburo; Ichimoto, Kiyoshi; Ueno, Satoru; Nagata, Shin'ichi; Ishii, Takako T.; Hagino, Masaoki; Komori, Hiroyuki; Nishida, Keisuke; Matsumoto, Takuma; Otsuji, Kenichi; Nakamura, Tahei; Kawate, Tomoko; Watanabe, Hiroko; Shibata, Kazunari
2010-08-01
We conducted coordinated observations of Ellerman bombs (EBs) between Hinode Satellite and Hida Observatory (HOP12). CaII H broad-band filter images of NOAA 10966 on 2007 August 9 and 10 were obtained with the Solar Optical Telescope (SOT) aboard the Hinode Satellite, and many bright points were observed. We identified a total of 4 bright points as EBs, and studied the temporal variation of their morphological fine structures and spectroscopic characteristics. With high-resolution CaII H images of SOT, we found that the EBs, thus far thought of as single bright features, are composed of a few of fine subcomponents. Also, by using Stokes I/V filtergrams with Hinode/SOT, and CaII H spectroheliograms with Hida/Domeless Solar Telescope (DST), our observation showed: (1) The mean duration, the mean width, the mean length, and the mean aspect ratio of the subcomponents were 390 s, 170 km, 450 km, and 2.7, respectively. (2) Subcomponents started to appear on the magnetic neutral lines, and extended their lengths from the original locations. (3) When the CaII H line of EBs showed the characteristic blue asymmetry, they are associated with the appearance or re-brightening of subcomponents. Summarizing our results, we obtained an observational view that elementary magnetic reconnections take place one by one successively and intermittently in EBs, and that their manifestation is the fine subcomponents of the EB phenomena.
High-performance liquid-chromatographic separation of subcomponents of antimycin-A
Abidi, S.L.
1988-01-01
Using a reversed-phase high-performance liquid chromatographic (HPLC) technique, a mixture of antimycins A was separated into eight hitherto unreported subcomponents, Ala, Alb, A2a, A2b, A3a, A3b, A4a, and A4b. Although a base-line resolution of the known four major antimycins Al, A2, A3, and A4 was readily achieved with mobile phases containing acetate buffers, the separation of the new antibiotic subcomponents was highly sensitive to variation in mobile phase conditions. The type and composition of organic modifiers, the nature of buffer salts, and the concentration of added electrolytes had profound effects on capacity factors, separation factors, and peak resolution values. Of the numerous chromatographic systems examined, a mobile phase consisting of methanol-water (70:30) and 0.005 M tetrabutylammonium phosphate at pH 3.0 yielded the most satisfactory results for the separation of the subcomponents. Reversed-phase gradient HPLC separation of the dansylated or methylated antibiotic compounds produced superior chromatographic characteristics and the presence of added electrolytes was not a critical factor for achieving separation. Differences in the chromatographic outcome between homologous and structural isomers were interpretated based on a differential solvophobic interaction rationale. Preparative reversed-phase HPLC under optimal conditions enabled isolation of pure samples of the methylated antimycin subcomponents for use in structural studies.
An innovative re-centering SMA-lead damper and its application to steel frame structures
NASA Astrophysics Data System (ADS)
Li, Hong-Nan; Liu, Ming-Ming; Fu, Xing
2018-07-01
In this paper, an innovative re-centering damper is presented to reduce the residual deflection of civil structures under strong earthquakes. The schematic diagram of the proposed re-centering SMA-lead damper (RSLD) is provided first. Then the mechanical behaviors of all the sub-components are measured by the testing machine, followed by the proposal of mechanical model of the RSLD. Based on the experimental results, the mechanical model factors for each sub-component are determined by the data fitting method, which is then used to simulate the hysteresis loops of the damper. Meanwhile the experiment of the fabricated RSLD is carried out to study the influence of the loading rate and displacement amplitude on the mechanical properties. Finally, the response analysis of a six-story steel frame structure installed with different damper position configurations is performed, and the results reveal that the proposed RSLD has an outstanding re-centering capacity.
Design and development of a cross-cultural disposition inventory
NASA Astrophysics Data System (ADS)
Davies, Randall; Zaugg, Holt; Tateishi, Isaku
2015-01-01
Advances in technology have increased the likelihood that engineers will have to work in a global, culturally diverse setting. Many schools of engineering are currently revising their curricula to help students to develop cultural competence. However, our ability to measure cultural dispositions can be a challenge. The purpose of this project was to develop and test an instrument that measures the various aspects of cultural disposition. The results of the validation process verified that the hypothesised model adequately represented the data. The refined instrument produced a four-factor model for the overall construct. The validation process for the instrument verified the existence of specific subcomponents that form the overall cultural disposition construct. There also seems to be a hierarchical relationship within the subcomponents of cultural disposition. Additional research is needed to explore which aspects of cultural disposition affect an individual's ability to work effectively in a culturally diverse engineering team.
Advanced On-the-Job Training System: Master Test Plan
1990-05-01
synonymous with program evaluation and consists of a plan to evaluate AOTS with regard to assessment of the four crit’cal issues of system compliance...acceptance, performance and suitability. Within the MTP, these critical issues are assessed at subcomponent, component, and subsystem levels. 14. SUBJECT...Master Test Plan is synonymous with program evaluation and consists of a plan to evaluate AOTS with regard to assessment of the four critical issues
Comparison between four dissimilar solar panel configurations
NASA Astrophysics Data System (ADS)
Suleiman, K.; Ali, U. A.; Yusuf, Ibrahim; Koko, A. D.; Bala, S. I.
2017-12-01
Several studies on photovoltaic systems focused on how it operates and energy required in operating it. Little attention is paid on its configurations, modeling of mean time to system failure, availability, cost benefit and comparisons of parallel and series-parallel designs. In this research work, four system configurations were studied. Configuration I consists of two sub-components arranged in parallel with 24 V each, configuration II consists of four sub-components arranged logically in parallel with 12 V each, configuration III consists of four sub-components arranged in series-parallel with 8 V each, and configuration IV has six sub-components with 6 V each arranged in series-parallel. Comparative analysis was made using Chapman Kolmogorov's method. The derivation for explicit expression of mean time to system failure, steady state availability and cost benefit analysis were performed, based on the comparison. Ranking method was used to determine the optimal configuration of the systems. The results of analytical and numerical solutions of system availability and mean time to system failure were determined and it was found that configuration I is the optimal configuration.
Toward Sustainable Communities: A Resource Book for Municipal and Local Governments.
ERIC Educational Resources Information Center
Roseland, Mark
This book is intended as a resource for elected officials, municipal staff, and citizens who would like to apply the concept of sustainable development in their communities through an ecosystems approach to human settlements management. The subcomponents of human community life and its impact on the environment are explored. Included are tested,…
Molecular properties of each subcomponent in Clostridium botulinum type B haemagglutinin complex.
Arimitsu, Hideyuki; Sakaguchi, Yoshihiko; Lee, Jae-Chul; Ochi, Sadayuki; Tsukamoto, Kentaro; Yamamoto, Yumiko; Ma, Shaobo; Tsuji, Takao; Oguma, Keiji
2008-08-01
The role of each subcomponent of Clostridium botulinum serotype B haemagglutinin (HA), which is one component of 16S toxin, and consists of four subcomponents (HA1, 2, 3a, and 3b), was investigated. In order to identify the subcomponent contributing to the stability of a neurotoxin in the gastro-intestinal tract, each recombinant HA (rHA) subcomponent was incubated with gastro-intestinal proteases. Although rHA1 and rHA3 were stable to these proteases except for specific cleavage, rHA2 was not. Anti-free whole HA serum reacted with neither rHA2 nor HA2 in 16S toxin on both Western blot and ELISA, while anti-rHA2 serum reacted with both rHA2 and HA2 in 16S toxin on Western blots, although it did not react with 16S toxin in ELISA. Binding or haemagglutination activity against erythrocytes was found in rHA1 and rHA3, but not in rHA2. In addition, only HA1 bound to the intestinal section. These results indicate that the HA (and 16S toxin) complex is assembled in the way that HA1 and HA3 (HA3a plus HA3b) encase HA2, followed by modification with trypsin-like bacterial protease, leading to the conclusion that HA1 and HA3 act as protective factors for the neurotoxin and as attachment factors to host cells.
Austin, Gina; Groppe, Karoline; Elsner, Birgit
2014-01-01
There is robust evidence showing a link between executive function (EF) and theory of mind (ToM) in 3- to 5-year-olds. However, it is unclear whether this relationship extends to middle childhood. In addition, there has been much discussion about the nature of this relationship. Whereas some authors claim that ToM is needed for EF, others argue that ToM requires EF. To date, however, studies examining the longitudinal relationship between distinct subcomponents of EF [i.e., attention shifting, working memory (WM) updating, inhibition] and ToM in middle childhood are rare. The present study examined (1) the relationship between three EF subcomponents (attention shifting, WM updating, inhibition) and ToM in middle childhood, and (2) the longitudinal reciprocal relationships between the EF subcomponents and ToM across a 1-year period. EF and ToM measures were assessed experimentally in a sample of 1,657 children (aged 6-11 years) at time point one (t1) and 1 year later at time point two (t2). Results showed that the concurrent relationships between all three EF subcomponents and ToM pertained in middle childhood at t1 and t2, respectively, even when age, gender, and fluid intelligence were partialled out. Moreover, cross-lagged structural equation modeling (again, controlling for age, gender, and fluid intelligence, as well as for the earlier levels of the target variables), revealed partial support for the view that early ToM predicts later EF, but stronger evidence for the assumption that early EF predicts later ToM. The latter was found for attention shifting and WM updating, but not for inhibition. This reveals the importance of studying the exact interplay of ToM and EF across childhood development, especially with regard to different EF subcomponents. Most likely, understanding others' mental states at different levels of perspective-taking requires specific EF subcomponents, suggesting developmental change in the relations between EF and ToM across childhood.
Combustor and Vane Features and Components Tested in a Gas Turbine Environment
NASA Technical Reports Server (NTRS)
Roinson, R. Craig; Verrilli, Michael J.
2003-01-01
The use of ceramic matrix composites (CMCs) as combustor liners and turbine vanes provides the potential of improving next-generation turbine engine performance, through lower emissions and higher cycle efficiency, relative to today s use of superalloy hot-section components. For example, the introduction of film-cooling air in metal combustor liners has led to higher levels of nitrogen oxide (NOx) emissions from the combustion process. An environmental barrier coated (EBC) siliconcarbide- fiber-reinforced silicon carbide matrix (SiC/SiC) composite is a new material system that can operate at higher temperatures, significantly reducing the film-cooling requirements and enabling lower NOx production. Evaluating components and subcomponents fabricated from these advanced CMCs under gas turbine conditions is paramount to demonstrating that the material system can perform as required in the complex thermal stress and environmentally aggressive engine environment. To date, only limited testing has been conducted on CMC combustor and turbine concepts and subelements of this type throughout the industry. As part of the Ultra-Efficient Engine Technology (UEET) Program, the High Pressure Burner Rig (HPBR) at the NASA Glenn Research Center was selected to demonstrate coupon, subcomponent feature, and component testing because it can economically provide the temperatures, pressures, velocities, and combustion gas compositions that closely simulate the engine environments. The results have proven the HPBR to be a highly versatile test rig amenable to multiple test specimen configurations essential to coupon and component testing.
Yao, Christie; Bernstein, Lori J; Rich, Jill B
2017-11-01
Women with breast cancer have reported adverse cognitive effects following chemotherapy. Evidence is mixed on whether executive functioning is particularly impaired in women treated with chemotherapy, in part due to the wide range of tasks used to measure executive processes. We performed a systematic review of the published literature to evaluate whether some subcomponents of executive functioning are more vulnerable to impairment than others among breast cancer survivors who had been treated with chemotherapy. Studies published as of April 2017 were identified using three electronic databases (MEDLINE, PsycINFO, and Web of Science) and a manual search of relevant reference lists. The methodological quality of included studies was assessed using a checklist of predefined criteria. Of 1280 identified articles, a total of 41 were included for review. Study findings were categorized into three primary subdomains of executive functioning: inhibition, shifting, and updating. Although there was heterogeneity in the neuropsychological measures used to assess executive functioning, tests could be grouped into the subcomponents they assessed. Inhibition appears relatively spared from the effects of chemotherapy, whereas impairments in shifting and updating are more commonly found following chemotherapy. Examination of subcomponents of executive functioning is recommended to better characterize the nature of executive dysfunction in women treated with chemotherapy. Future studies should include executive functioning tasks of varying complexity, use of multiple tasks to increase reliability, and alternative indices to capture performance, such as within-person variability.
1991-02-01
FY 1990 ACCOMPLISHMENTS: a. (U) Completed physical functional and operational audit of system, subcomponents and interfaces related to digital...receiver hardware. b. (U) Developed system specification reflecting audit results. c. (U) Established reliability assessment and recommended changes and/or...interoperability testing and demonstrations. d. (U) Updated joint terminal specifications and standards. e. (U) Audited Army/Navy/Air Force terminal designs. f. (U
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
2015-08-01
Since 1990, the National Renewable Energy Laboratory’s (NREL's) National Wind Technology Center (NWTC) has tested more than 150 wind turbine blades. NWTC researchers can test full-scale and subcomponent articles, conduct data analyses, and provide engineering expertise on best design practices. Structural testing of wind turbine blades enables designers, manufacturers, and owners to validate designs and assess structural performance to specific load conditions. Rigorous structural testing can reveal design and manufacturing problems at an early stage of development that can lead to overall improvements in design and increase system reliability.
The Department of Defense Should Avoid a Joint Acquisition Approach to the Sixth-Generation Fighter
2014-01-01
development, test, and evaluation (RDT&E) efforts and by achieving econo - mies of scale in procurement and operations and support (O&S).1 Yet, the need...subcomponents. • We assumed that single-service programs conduct com- pletely separate O&S and therefore do not enjoy econo - mies of scale in O&S. • We
Subcomponents of Second-Language Aptitude and Second-Language Proficiency
ERIC Educational Resources Information Center
Sparks, Richard L.; Humbach, Nancy; Patton, Jon; Ganschow, Leonore
2011-01-01
A factor analysis of a test battery that included early first-language (L1) achievement, L1 cognitive ability, second-language (L2) aptitude, and L2 affective measures to predict oral and written L2 proficiency was conducted. The analysis yielded 4 factors that were labeled Language Analysis, composed of L1 and L2 language comprehension, grammar,…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hunziker, R.; Gyarmathy, G.
1994-04-01
A centrifugal compressor was tested with three different diffusers with circular-arc vanes. The vane inlet angle was varied from 15 to 30 deg. Detailed static wall pressure measurements show that the pressure field in the diffuser inlet is very sensitive to flow rate. The stability limit regularly occurred at the flow rate giving the maximum pressure rise for the overall stage. Mild surge arises as a dynamic instability of the compression system. The analysis of the pressure rise characteristic of each individual subcomponent (impeller, diffuser inlet, diffuser channel,...) reveals their contribution to the overall pressure rise. The diffuser channels playmore » an inherently destabilizing role while the impeller and the diffuser inlet are typically stabilizing. The stability limit was mainly determined by a change in the characteristic of the diffuser inlet. Further, the stability limit was found to be independent of the development of inducer-tip recirculation.« less
Boothroyd, Lynda G; Brewer, Gayle
2014-07-01
Previous research has suggested that an individual's sociosexual orientation (i.e., their willingness to engage in sexual behavior outside of long-term relationships) may influence the qualities they find attractive in a potential mate. Results, however, have not been consistent and, moreover, studies have tended to draw from specific social groups. Here, we tested the relationship between sociosexuality and female's preferences for masculinity in male faces, using a diverse population. We furthermore investigated impulsivity alongside sociosexuality, as this trait has been suggested as a "root" cause of variation in sexual behavior (Cross, 2010) and thus may better explain variation in mate choice. Results showed a significant association between increases in both sociosexuality and two subcomponents of impulsivity and greater preferences for masculine male features. Regression analysis suggested that a subcomponent of impulsivity, namely lack of planning, was the primary determinant of preferences. We discuss the implications these results have for our understanding of female attraction to masculine features.
Subcomponent self-assembly and guest-binding properties of face-capped Fe4L4(8+) capsules.
Bilbeisi, Rana A; Clegg, Jack K; Elgrishi, Noémie; de Hatten, Xavier; Devillard, Marc; Breiner, Boris; Mal, Prasenjit; Nitschke, Jonathan R
2012-03-21
A general method for preparing Fe(4)L(4) face-capped tetrahedral cages through subcomponent self-assembly was developed and has been demonstrated using four different C(3)-symmetric triamines, 2-formylpyridine, and iron(II). Three of the triamines were shown also to form Fe(2)L(3) helicates when the appropriate stoichiometry of subcomponents was used. Two of the cages were observed to have nearly identical Fe-Fe distances in the solid state, which enabled their ligands to be coincorporated into a collection of mixed cages. Only one of the cages combined a sufficiently large cavity with the sufficiently small pores required for guest binding, taking up a wide variety of guest species in size- and shape-selective fashion.
Miniature fiber optic loop subcomponent for compact sensors and dense routing
NASA Astrophysics Data System (ADS)
Gillham, Frederick J.; Stowe, David W.; Ouellette, Thomas R.; Pryshlak, Adrian P.
1999-05-01
Fiber optic data links and embedded sensors, such as Fabry- Perot and Mach-Zehnders, are important elements in smart structure architectures. Unfortunately, one problem with optical fiber is the inherent limit through which fibers and cables can be looped. A revolutionary, patented technology has been developed which overcomes this problem. Based on processing the fiber into low loss miniature bends, it permits routing the fiber to difficult areas, and minimizing the size of sensors and components. The minimum bend diameter for singlemode fiber is typically over two inches in diameter, to avoid light attenuation and limit stresses which could prematurely break the fiber. With the new miniature bend technology, bend diameters as small as 1 mm are readily achieved. One embodiment is a sub-component with standard singlemode fiber formed into a 180 degree bend and packaged in a glass tube only 1.5 mm OD X 8 mm long, Figure 1. Measured insertion loss is less than 0.2 dB from 1260 nm to 1680 nm. A final processing step which anneals the fiber into the eventual curvature, reduces the internal stress, thereby resulting in long life expectancy with robust immunity to external loading. This paper addresses the optical and physical performance of the sub-component. Particular attention is paid to attenuation spectra, polarization dependent loss, reflectance, thermal cycle, damp heat, and shock tests. Applications are presented which employs the bend technology. Concatenating right angle bends into a 'wire harness' demonstrates the ability to route fiber through a smart engine or satellite structure. Miniature optical coils are proposed for sensors and expansion joints.
Segmented trapped vortex cavity
NASA Technical Reports Server (NTRS)
Grammel, Jr., Leonard Paul (Inventor); Pennekamp, David Lance (Inventor); Winslow, Jr., Ralph Henry (Inventor)
2010-01-01
An annular trapped vortex cavity assembly segment comprising includes a cavity forward wall, a cavity aft wall, and a cavity radially outer wall there between defining a cavity segment therein. A cavity opening extends between the forward and aft walls at a radially inner end of the assembly segment. Radially spaced apart pluralities of air injection first and second holes extend through the forward and aft walls respectively. The segment may include first and second expansion joint features at distal first and second ends respectively of the segment. The segment may include a forward subcomponent including the cavity forward wall attached to an aft subcomponent including the cavity aft wall. The forward and aft subcomponents include forward and aft portions of the cavity radially outer wall respectively. A ring of the segments may be circumferentially disposed about an axis to form an annular segmented vortex cavity assembly.
Airframe Noise Sub-Component Definition and Model
NASA Technical Reports Server (NTRS)
Golub, Robert A. (Technical Monitor); Sen, Rahul; Hardy, Bruce; Yamamoto, Kingo; Guo, Yue-Ping; Miller, Gregory
2004-01-01
Both in-house, and jointly with NASA under the Advanced Subsonic Transport (AST) program, Boeing Commerical Aircraft Company (BCA) had begun work on systematically identifying specific components of noise responsible for total airframe noise generation and applying the knowledge gained towards the creation of a model for airframe noise prediction. This report documents the continuation of the collection of database from model-scale and full-scale airframe noise measurements to compliment the earlier existing databases, the development of the subcomponent models and the generation of a new empirical prediction code. The airframe subcomponent data includes measurements from aircraft ranging in size from a Boeing 737 to aircraft larger than a Boeing 747 aircraft. These results provide the continuity to evaluate the technology developed under the AST program consistent with the guidelines set forth in NASA CR-198298.
In vitro reconstitution of the Clostridium botulinum type D progenitor toxin.
Kouguchi, Hirokazu; Watanabe, Toshihiro; Sagane, Yoshimasa; Sunagawa, Hiroyuki; Ohyama, Tohru
2002-01-25
Clostridium botulinum type D strain 4947 produces two different sizes of progenitor toxins (M and L) as intact forms without proteolytic processing. The M toxin is composed of neurotoxin (NT) and nontoxic-nonhemagglutinin (NTNHA), whereas the L toxin is composed of the M toxin and hemagglutinin (HA) subcomponents (HA-70, HA-17, and HA-33). The HA-70 subcomponent and the HA-33/17 complex were isolated from the L toxin to near homogeneity by chromatography in the presence of denaturing agents. We were able to demonstrate, for the first time, in vitro reconstitution of the L toxin formed by mixing purified M toxin, HA-70, and HA-33/17. The properties of reconstituted and native L toxins are indistinguishable with respect to their gel filtration profiles, native-PAGE profiles, hemagglutination activity, binding activity to erythrocytes, and oral toxicity to mice. M toxin, which contained nicked NTNHA prepared by treatment with trypsin, could no longer be reconstituted to the L toxin with HA subcomponents, whereas the L toxin treated with proteases was not degraded into M toxin and HA subcomponents. We conclude that the M toxin forms first by assembly of NT with NTNHA and is subsequently converted to the L toxin by assembly with HA-70 and HA-33/17.
Järvelä-Reijonen, Elina; Karhunen, Leila; Sairanen, Essi; Muotka, Joona; Lindroos, Sanni; Laitinen, Jaana; Puttonen, Sampsa; Peuhkuri, Katri; Hallikainen, Maarit; Pihlajamäki, Jussi; Korpela, Riitta; Ermes, Miikka; Lappalainen, Raimo; Kolehmainen, Marjukka
2018-02-27
Internal motivation and good psychological capabilities are important factors in successful eating-related behavior change. Thus, we investigated whether general acceptance and commitment therapy (ACT) affects reported eating behavior and diet quality and whether baseline perceived stress moderates the intervention effects. Secondary analysis of unblinded randomized controlled trial in three Finnish cities. Working-aged adults with psychological distress and overweight or obesity in three parallel groups: (1) ACT-based Face-to-face (n = 70; six group sessions led by a psychologist), (2) ACT-based Mobile (n = 78; one group session and mobile app), and (3) Control (n = 71; only the measurements). At baseline, the participants' (n = 219, 85% females) mean body mass index was 31.3 kg/m 2 (SD = 2.9), and mean age was 49.5 years (SD = 7.4). The measurements conducted before the 8-week intervention period (baseline), 10 weeks after the baseline (post-intervention), and 36 weeks after the baseline (follow-up) included clinical measurements, questionnaires of eating behavior (IES-1, TFEQ-R18, HTAS, ecSI 2.0, REBS), diet quality (IDQ), alcohol consumption (AUDIT-C), perceived stress (PSS), and 48-h dietary recall. Hierarchical linear modeling (Wald test) was used to analyze the differences in changes between groups. Group x time interactions showed that the subcomponent of intuitive eating (IES-1), i.e., Eating for physical rather than emotional reasons, increased in both ACT-based groups (p = .019); the subcomponent of TFEQ-R18, i.e., Uncontrolled eating, decreased in the Face-to-face group (p = .020); the subcomponent of health and taste attitudes (HTAS), i.e., Using food as a reward, decreased in the Mobile group (p = .048); and both subcomponent of eating competence (ecSI 2.0), i.e., Food acceptance (p = .048), and two subcomponents of regulation of eating behavior (REBS), i.e., Integrated and Identified regulation (p = .003, p = .023, respectively), increased in the Face-to-face group. Baseline perceived stress did not moderate effects on these particular features of eating behavior from baseline to follow-up. No statistically significant effects were found for dietary measures. ACT-based interventions, delivered in group sessions or by mobile app, showed beneficial effects on reported eating behavior. Beneficial effects on eating behavior were, however, not accompanied by parallel changes in diet, which suggests that ACT-based interventions should include nutritional counseling if changes in diet are targeted. ClinicalTrials.gov ( NCT01738256 ), registered 17 August, 2012.
Duval, J; Coyette, F; Seron, X
2008-08-01
This paper describes and evaluates a programme of neuropsychological rehabilitation which aims to improve three sub-components of the working memory central executive: processing load, updating and dual-task monitoring, by the acquisition of three re-organisation strategies (double coding, serial processing and speed reduction). Our programme has two stages: cognitive rehabilitation (graduated exercises subdivided into three sub-programmes each corresponding to a sub-component) which enables the patient to acquire the three specific strategies; and an ecological rehabilitation, including analyses of scenarios and simulations of real-life situations, which aims to transfer the strategies learned to everyday life. The programme also includes information meetings. It was applied to a single case who had working memory deficits after a surgical operation for a cerebral tumour on his left internal temporal ganglioglioma. Multiple baseline tests were used to measure the effectiveness of the rehabilitation. The programme proved to be effective for all three working memory components; a generalisation of its effects to everyday life was observed, and the effects were undiminished three months later.
Reversed-phase thin-layer chromatography of homologs of Antimycin-A and related derivatives
Abidi, Sharon L.
1989-01-01
Using a reversed-phase high-performance liquid chromatographic (HPLC) technique, a mixture of antimycins A was separated into eight hitherto unreported subcomponents, Ala, Alb, A2a, A2b, A3a, A3b, A4a, and A4b. Although a base-line resolution of the known four major antimycins Al, A2, A3, and A4 was readily achieved with mobile phases containing acetate buffers, the separation of the new antibiotic subcomponents was highly sensitive to variation in mobile phase conditions. The type and composition of organic modifiers, the nature of buffer salts, and the concentration of added electrolytes had profound effects on capacity factors, separation factors, and peak resolution values. Of the numerous chromatographic systems examined, a mobile phase consisting of methanol-water (70:30) and 0.005 M tetrabutylammonium phosphate at pH 3.0 yielded the most satisfactory results for the separation of the subcomponents. Reversed-phase gradient HPLC separation of the dansylated or methylated antibiotic compounds produced superior chromatographic characteristics and the presence of added electrolytes was not a critical factor for achieving separation. Differences in the chromatographic outcome between homologous and structural isomers were interpretated based on a differential solvophobic interaction rationale. Preparative reversed-phase HPLC under optimal conditions enabled isolation of pure samples of the methylated antimycin subcomponents for use in structural studies.
Lupo, Michela; Ferlazzo, Fabio; Aloise, Fabio; Di Nocera, Francesco; Tedesco, Anna Maria; Cardillo, Chiara; Leggio, Maria
2018-04-27
Several studies have demonstrated that the processing of visuospatial memory for locations in reaching space and in navigational space is supported by independent systems, and that the coding of visuospatial information depends on the modality of the presentation (i.e., sequential or simultaneous). However, these lines of evidence and the most common neuropsychological tests used by clinicians to investigate visuospatial memory have several limitations (e.g., they are unable to analyze all the subcomponents of this function and are not directly comparable). Therefore, we developed a new battery of tests that is able to investigate these subcomponents. We recruited 71 healthy subjects who underwent sequential and simultaneous navigational tests by using an innovative sensorized platform, as well as comparable paper tests to evaluate the same components in reaching space (Exp. 1). Consistent with the literature, the principal-component method of analysis used in this study demonstrated the presence of distinct memory for sequences in different portions of space, but no distinction was found for simultaneous presentation, suggesting that different modalities of eye gaze exploration are used when subjects have to perform different types of tasks. For this purpose, an infrared Tobii Eye-Tracking X50 system was used in both spatial conditions (Exp. 2), showing that a clear effect of the presentation modality was due to the specific strategy used by subjects to explore the stimuli in space. Given these findings, the neuropsychological battery established in the present study allows us to show basic differences in the normal coding of stimuli, which can explain the specific visuospatial deficits found in various neurological conditions.
Graphite/epoxy composite adapters for the Space Shuttle/Centaur vehicle
NASA Technical Reports Server (NTRS)
Kasper, Harold J.; Ring, Darryl S.
1990-01-01
The decision to launch various NASA satellite and Air Force spacecraft from the Space Shuttle created the need for a high-energy upper stage capable of being deployed from the cargo bay. Two redesigned versions of the Centaur vehicle which employed a graphite/epoxy composite material for the forward and aft adapters were selected. Since this was the first time a graphite/epoxy material was used for Centaur major structural components, the development of the adapters was a major effort. An overview of the composite adapter designs, subcomponent design evaluation test results, and composite adapter test results from a full-scale vehicle structural test is presented.
Upcycling UAS into modular platforms for Earth science and autonomy research
NASA Astrophysics Data System (ADS)
Dahlgren, R. P.; Dary, O. G.; Ogunbiyi, J. A.; Pinsker, E. A.; Reynolds, K. W.; Werner, C. A.
2015-12-01
This reports the results of a multidisciplinary project conducted at the NASA Ames Research Center (ARC) involving a number of student interns over the summers of 2014 and 2015. The project had a goal of applying rapid prototyping techniques, including 3D printing, to unmanned aircraft systems (UAS), and demonstrated that surplus UAS could be repurposed into new configurations suitable for conducting science missions. ARC received several units of the RQ-11 Raven and RQ-14 DragonEye manufactured by AeroVironment Corporation, along with ground stations and spare parts. These UAS have electric propulsion, a wingspan and length ~1m; they are designed to disassemble for transport, have a simple wing design with snap-together interfaces, made from lightweight materials. After removing all ITAR restricted technology these were made available to summer interns that also had access to 3D printing, CNC laser-cutting equipment through NASA's SpaceShop. The modular nature and simple wing profiles enabled the teams to deconstruct and subsequently reconfigure them into completely new airframes. Two multi-fuselage designs were assembled using Ardupilot-based common avionics architecture (CAA), with extended wingspans, an H-tail and an innovative cambered flap system. After NASA internal design reviews, the students fabricated new control surfaces and subcomponents necessary to splice the RQ-14 subcomponents back together. Laboratory testing was performed on test articles to determine bending modulus and safety factors, and documentation was prepared for airworthiness flight safety review. Upon receiving approval of documentation and flight readiness certification, the repurposed UAS were flown at Crows Landing airfield in Stanislaus County, California, initially under RC pilot control and subsequently under fully autonomous control. The RQ-11 is now being used to expand on the modularity design and the Team has been at work in designing different configurations and a payload pod that will allow flexible modular implementation. This project demonstrated that rapid prototyping combined with modular subcomponents can enable an increase in the rate of design iterations on aircraft optimized for science missions. Field data will be reported for missions at the Salton Sea and Crows Landing, California.
Design, testing, and damage tolerance study of bonded stiffened composite wing cover panels
NASA Technical Reports Server (NTRS)
Madan, Ram C.; Sutton, Jason O.
1988-01-01
Results are presented from the application of damage tolerance criteria for composite panels to multistringer composite wing cover panels developed under NASA's Composite Transport Wing Technology Development contract. This conceptual wing design integrated aeroelastic stiffness constraints with an enhanced damage tolerance material system, in order to yield optimized producibility and structural performance. Damage tolerance was demonstrated in a test program using full-sized cover panel subcomponents; panel skins were impacted at midbay between stiffeners, directly over a stiffener, and over the stiffener flange edge. None of the impacts produced visible damage. NASTRAN analyses were performed to simulate NDI-detected invisible damage.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bellini, A.; Anderson, J.; Van der Marel, R. P.
We take advantage of the exquisite quality of the Hubble Space Telescope 26-filter astro-photometric catalog of the core of ω Cen presented in the first paper of this series and the empirical differential-reddening correction presented in the second paper in order to distill the main sequence into its constituent populations. To this end, we restrict ourselves to the five most useful filters: the magic “trio” of F275W, F336W, and F438W, along with F606W and F814W. We develop a strategy for identifying color systems where different populations stand out most distinctly, then we isolate those populations and examine them in othermore » filters where their subpopulations also come to light. In this way, we have identified at least 15 subpopulations, each of which has a distinctive fiducial curve through our five-dimensional photometric space. We confirm the MSa to be split into two subcomponents, and find that both the bMS and the rMS are split into three subcomponents. Moreover, we have discovered two additional MS groups: the MSd (which has three subcomponents) shares similar properties with the bMS, and the MSe (which has four subcomponents) has properties more similar to those of the rMS. We examine the fiducial curves together and use synthetic spectra to infer relative heavy-element, light-element, and helium abundances for the populations. Our findings show that the stellar populations and star formation history of ω Cen are even more complex than inferred previously. Finally, we provide as a supplement to the original catalog a list that identifies for each star which population it is most likely associated with.« less
Bolat, D; Bahar, S; Tipirdamaz, S; Selcuk, M L
2013-12-01
The aims of this study were to determine the total volume of the horse kidney and volume fractions of its functional subcomponents (cortex, medulla, renal pelvis) using stereological methods and investigate any possible difference in the functional subcomponents of the right and left kidneys that may arise from differences in shape. The study was carried out on the kidneys of 5 horses of different breed and sex. The weight of the kidneys was measured by a digital scale, and kidney volume was calculated by Archimedes' principle. Total kidney volume and volume fractions of subcomponents of the right and left kidneys were estimated by the Cavalieri's principle. The weights of the right and left kidneys were 550 ± 25 g and 585 ± 23 g, respectively. The volumes of the right and left kidneys estimated using the Cavalieri method were 542 ± 46 ml and 581 ± 29 ml. The relative organ weight of the kidneys was calculated as 1:330. The densities of the right and left kidneys were determined to be 1.01 and 1.00, respectively. The mean volume fractions of the cortex, medulla and renal pelvis were determined as 55.6, 42.7 and 1.7 in both kidneys. No statistically significant difference existed between morphometric data pertaining to the right and left kidneys (P > 0.05). To determine precisely whether differences in shape cause any difference in the functional subcomponents of the right and left kidneys requires further investigation of differences in the number of microscopically functional unit of the kidney such as renal glomeruli and nephrons. © 2013 Blackwell Verlag GmbH.
Hayward, Mariam Naqshbandi; Mequanint, Selam; Paquette-Warren, Jann; Bailie, Ross; Chirila, Alexandra; Dyck, Roland; Green, Michael; Hanley, Anthony; Tompkins, Jordan; Harris, Stewart
2017-03-23
Given the astounding rates of diabetes and related complications, and the barriers to providing care present in Indigenous communities in Canada, intervention strategies that take into account contextual factors such as readiness to mobilize are needed to maximize improvements and increase the likelihood of success and sustainment. As part of the national FORGE AHEAD Program, we sought to develop, test and validate a clinical readiness consultation tool aimed at assessing the readiness of clinical teams working on-reserve in First Nations communities to participate in quality improvement (QI) to enhance diabetes care in Canada. A literature review was conducted to identify existing readiness tools. The ABCD - SAT was adapted using a consensus approach that emphasized a community-based participatory approach and prioritized the knowledge and wisdom held by community members. The tool was piloted with a group of 16 people from 7 provinces and 11 partnering communities to assess language use, clarity, relevance, format, and ease of completion using examples. Internal reliability analysis and convergence validity were conducted with data from 53 clinical team members from 11 First Nations communities (3-5 per community) who have participated in the FORGE AHEAD program. The 27-page Clinical Readiness Consultation Tool (CRCT) consists of five main components, 21 sub-components, and 74 items that are aligned with the Expanded Chronic Care Model. Five-point Likert scale feedback from the pilot ranged from 3.25 to 4.5. Length of the tool was reported as a drawback but respondents noted that all the items were needed to provide a comprehensive picture of the healthcare system. Results for internal consistency showed that all sub-components except for two were within acceptable ranges (0.77-0.93). The Team Structure and Function sub-component scale had a moderately significant positive correlation with the validated Team Climate Inventory, r = 0.45, p < 0.05. The testing and validation of the FORGE AHEAD CRCT demonstrated that the tool is acceptable, valid and reliable. The CRCT has been successfully used to support the implementation of the FORGE AHEAD Program and the health services changes that partnering First Nations communities have designed and undertaken to improve diabetes care. Current ClinicalTrial.gov protocol ID NCT02234973 . Date of Registration: July 30, 2014.
Evaluation of Erosion Resistance of Advanced Turbine Thermal Barrier Coatings
NASA Technical Reports Server (NTRS)
Zhu, Dongming; Kuczmarski, Maria A.; Miller, Robert A.; Cuy, Michael D.
2007-01-01
The erosion resistant turbine thermal barrier coating system is critical to aircraft engine performance and durability. By demonstrating advanced turbine material testing capabilities, we will be able to facilitate the critical turbine coating and subcomponent development and help establish advanced erosion-resistant turbine airfoil thermal barrier coatings design tools. The objective of this work is to determine erosion resistance of advanced thermal barrier coating systems under simulated engine erosion and/or thermal gradient environments, validating advanced turbine airfoil thermal barrier coating systems based on nano-tetragonal phase toughening design approaches.
Ratnoff, Oscar D.; Pensky, Jack; Ogston, Derek; Naff, George B.
1969-01-01
The fraction of human serum designated as C'1 esterase inhibitor is known to inhibit the action of C'1 esterase, a plasma kallikrein, and PF/Dil, an enzyme in plasma enhancing cutaneous vascular permeability. In the present study, C'1 esterase inhibitor has been found to block the actions of plasmin and the C'1r subcomponent of the first component of complement, and to retard the generation of PF/Dil. No inhibition of blood clotting or of the generation of plasmin was demonstrable. PMID:4178758
Multi-level comparison of empathy in schizophrenia: an fMRI study of a cartoon task.
Lee, Seung Jae; Kang, Do Hyung; Kim, Chi-Won; Gu, Bon Mi; Park, Ji-Young; Choi, Chi-Hoon; Shin, Na Young; Lee, Jong-Min; Kwon, Jun Soo
2010-02-28
Empathy deficits might play a role in social dysfunction in schizophrenia. However, few studies have investigated the neuroanatomical underpinnings of the subcomponents of empathy in schizophrenia. This study investigated the hemodynamic responses to three subcomponents of empathy in patients with schizophrenia (N=15) and healthy volunteers (N=18), performing an empathy cartoon task during functional magnetic resonance imaging. The experiment used a block design with four conditions: cognitive, emotional, and inhibitory empathy, and physical causality control. Data were analyzed by comparing the blood-oxygen-level-dependent (BOLD) signal activation between the two groups. The cognitive empathy condition activated the right temporal pole to a lesser extent in the patient group than in comparison subjects. In the emotional and inhibitory conditions, the patients showed greater activation in the left insula and in the right middle/inferior frontal cortex, respectively. These findings add to our understanding of the impaired empathy in patients with schizophrenia by identifying a multi-level cortical dysfunction that underlies a deficit in each subcomponent of empathy and highlighting the importance of the fronto-temporal cortical network in ability to empathize. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.
An explosively driven high-power microwave pulsed power system.
Elsayed, M A; Neuber, A A; Dickens, J C; Walter, J W; Kristiansen, M; Altgilbers, L L
2012-02-01
The increased popularity of high power microwave systems and the various sources to drive them is the motivation behind the work to be presented. A stand-alone, self-contained explosively driven high power microwave pulsed power system has been designed, built, and tested at Texas Tech University's Center for Pulsed Power and Power Electronics. The system integrates four different sub-units that are composed of a battery driven prime power source utilizing capacitive energy storage, a dual stage helical flux compression generator as the main energy amplification device, an integrated power conditioning system with inductive energy storage including a fast opening electro-explosive switch, and a triode reflex geometry virtual cathode oscillator as the microwave radiating source. This system has displayed a measured electrical source power level of over 5 GW and peak radiated microwaves of about 200 MW. It is contained within a 15 cm diameter housing and measures 2 m in length, giving a housing volume of slightly less than 39 l. The system and its sub-components have been extensively studied, both as integrated and individual units, to further expand on components behavior and operation physics. This report will serve as a detailed design overview of each of the four subcomponents and provide detailed analysis of the overall system performance and benchmarks.
Forscher, Emily C.; Zheng, Yan; Ke, Zijun; Folstein, Jonathan; Li, Wen
2016-01-01
Emotion perception is known to involve multiple operations and waves of analysis, but specific nature of these processes remains poorly understood. Combining psychophysical testing and neurometric analysis of event-related potentials (ERPs) in a fear detection task with parametrically-varied fear intensities (N=45), we sought to elucidate key processes in fear perception. Building on psychophysics marking fear perception thresholds, our neurometric model fitting identified several putative operations and stages: four key processes arose in sequence following face presentation—fear-neutral categorization (P1 at 100 ms), fear detection (P300 at 320 ms), valuation (early subcomponent of the late positive potential/LPP at 400–500 ms) and conscious awareness (late subcomponent LPP at 500–600 ms). Furthermore, within-subject brain-behavior association suggests that initial emotion categorization was mandatory and detached from behavior whereas valuation and conscious awareness directly impacted behavioral outcome (explaining 17% and 31% of the total variance, respectively). The current study thus reveals the chronometry of fear perception, ascribing psychological meaning to distinct underlying processes. The combination of early categorization and late valuation of fear reconciles conflicting (categorical versus dimensional) emotion accounts, lending support to a hybrid model. Importantly, future research could specifically interrogate these psychological processes in various behaviors and psychopathologies (e.g., anxiety and depression). PMID:27546075
An explosively driven high-power microwave pulsed power system
NASA Astrophysics Data System (ADS)
Elsayed, M. A.; Neuber, A. A.; Dickens, J. C.; Walter, J. W.; Kristiansen, M.; Altgilbers, L. L.
2012-02-01
The increased popularity of high power microwave systems and the various sources to drive them is the motivation behind the work to be presented. A stand-alone, self-contained explosively driven high power microwave pulsed power system has been designed, built, and tested at Texas Tech University's Center for Pulsed Power and Power Electronics. The system integrates four different sub-units that are composed of a battery driven prime power source utilizing capacitive energy storage, a dual stage helical flux compression generator as the main energy amplification device, an integrated power conditioning system with inductive energy storage including a fast opening electro-explosive switch, and a triode reflex geometry virtual cathode oscillator as the microwave radiating source. This system has displayed a measured electrical source power level of over 5 GW and peak radiated microwaves of about 200 MW. It is contained within a 15 cm diameter housing and measures 2 m in length, giving a housing volume of slightly less than 39 l. The system and its sub-components have been extensively studied, both as integrated and individual units, to further expand on components behavior and operation physics. This report will serve as a detailed design overview of each of the four subcomponents and provide detailed analysis of the overall system performance and benchmarks.
Ihnen, S.K.Z.; Petersen, Steven E.; Schlaggar, Bradley L.
2015-01-01
Attentional control is important both for learning to read and for performing difficult reading tasks. A previous study invoked 2 mechanisms to explain reaction time (RT) differences between reading tasks with variable attentional demands. The present study combined behavioral and neuroimaging measures to test the hypotheses that there are 2 mechanisms of interaction between attentional control and reading; that these mechanisms are dissociable both behaviorally and neuro-anatomically; and that the 2 mechanisms involve functionally separable control systems. First, RT evidence was found in support of the 2-mechanism model, corroborating the previous study. Next, 2 sets of brain regions were identified as showing functional magnetic resonance imaging blood oxygen level-dependent activity that maps onto the 2-mechanism distinction. One set included bilateral Cingulo-opercular regions and mostly right-lateralized Dorsal Attention regions (CO/DA+). This CO/DA+ region set showed response properties consistent with a role in reporting which processing pathway (phonological or lexical) was biased for a particular trial. A second set was composed primarily of left-lateralized Frontal-parietal (FP) regions. Its signal properties were consistent with a role in response checking. These results demonstrate how the subcomponents of attentional control interact with subcomponents of reading processes in healthy young adults. PMID:24275830
Stereochemistry in subcomponent self-assembly.
Castilla, Ana M; Ramsay, William J; Nitschke, Jonathan R
2014-07-15
CONSPECTUS: As Pasteur noted more than 150 years ago, asymmetry exists in matter at all organization levels. Biopolymers such as proteins or DNA adopt one-handed conformations, as a result of the chirality of their constituent building blocks. Even at the level of elementary particles, asymmetry exists due to parity violation in the weak nuclear force. While the origin of homochirality in living systems remains obscure, as does the possibility of its connection with broken symmetries at larger or smaller length scales, its centrality to biomolecular structure is clear: the single-handed forms of bio(macro)molecules interlock in ways that depend upon their handednesses. Dynamic artificial systems, such as helical polymers and other supramolecular structures, have provided a means to study the mechanisms of transmission and amplification of stereochemical information, which are key processes to understand in the context of the origins and functions of biological homochirality. Control over stereochemical information transfer in self-assembled systems will also be crucial for the development of new applications in chiral recognition and separation, asymmetric catalysis, and molecular devices. In this Account, we explore different aspects of stereochemistry encountered during the use of subcomponent self-assembly, whereby complex structures are prepared through the simultaneous formation of dynamic coordinative (N → metal) and covalent (N═C) bonds. This technique provides a useful method to study stereochemical information transfer processes within metal-organic assemblies, which may contain different combinations of fixed (carbon) and labile (metal) stereocenters. We start by discussing how simple subcomponents with fixed stereogenic centers can be incorporated in the organic ligands of mononuclear coordination complexes and communicate stereochemical information to the metal center, resulting in diastereomeric enrichment. Enantiopure subcomponents were then incorporated in self-assembly reactions to control the stereochemistry of increasingly complex architectures. This strategy has also allowed exploration of the degree to which stereochemical information is propagated through tetrahedral frameworks cooperatively, leading to the observation of stereochemical coupling across more than 2 nm between metal stereocenters and the enantioselective synthesis of a face-capped tetrahedron containing no carbon stereocenters via a stereochemical memory effect. Several studies on the communication of stereochemistry between the configurationally flexible metal centers in tetrahedral metal-organic cages have shed light on the factors governing this process, allowing the synthesis of an asymmetric cage, obtained in racemic form, in which all symmetry elements have been broken. Finally, we discuss how stereochemical diversity leads to structural complexity in the structures prepared through subcomponent self-assembly. Initial use of octahedral metal templates with facial stereochemistry in subcomponent self-assembly, which predictably gave rise to structures of tetrahedral symmetry, was extended to meridional metal centers. These lower-symmetry linkages have allowed the assembly of a series of increasingly intricate 3D architectures of varying functionality. The knowledge gained from investigating different aspects of the stereochemistry of metal-templated assemblies thus not only leads to new means of structural control but also opens pathways toward functions such as stereoselective guest binding and transformation.
Structural considerations for fabrication and mounting of the AXAF HRMA optics
NASA Technical Reports Server (NTRS)
Cohen, Lester M.; Cernoch, Larry; Mathews, Gary; Stallcup, Michael
1990-01-01
A methodology is described which minimizes optics distortion in the fabrication, metrology, and launch configuration phases. The significance of finite element modeling and breadboard testing is described with respect to performance analyses of support structures and material effects in NASA's AXAF X-ray optics. The paper outlines the requirements for AXAF performance, optical fabrication, metrology, and glass support fixtures, as well as the specifications for mirror sensitivity and the high-resolution mirror assembly. Analytical modeling of the tools is shown to coincide with grinding and polishing experiments, and is useful for designing large-area polishing and grinding tools. Metrological subcomponents that have undergone initial testing show evidence of meeting force requirements.
The Influence of Childhood Adversity on Rural Black Men's Sexual Risk Behavior.
Kogan, Steven M; Cho, Junhan; Oshri, Assaf
2016-12-01
Young Black men living in resource-poor rural environments are disproportionately affected by both adverse childhood experiences and HIV/STIs. The influence of childhood adversity on sexual risk behavior remains to be examined among this vulnerable population. In this study, we investigated the influence of overall adversity as well as three subcomponents, abusive parenting, parental neglect, and witnessing family violence, on men's engagement in sexual risk behavior. We hypothesized that adverse experiences would predict engagement in sexual risk behaviors including multiple sexual partnerships, inconsistent condom use, frequent sexual activity, and concurrent substance abuse and sexual activity. We tested formally the extent to which defensive relational schemas mediated these associations. Hypotheses were tested with data from 505 rural Black men (M age = 20.29, SD = 1.10) participating in the African American Men's Health Project. Participants were recruited using respondent-driven sampling. Self-report data were gathered from participants via audio computer-assisted self-interviews. Bi-factor analyses revealed that, in addition to a common adversity factor, neglect independently predicted sexual risk behavior. Men's defensive relational schemas partially mediated the influence of the common adversity factor as well as the neglect subcomponent on sexual risk behavior. The present research identified a potential risk factor for sexual risk behavior in an understudied and vulnerable population. Adverse childhood experiences in general, and neglect in particular, may place many young Black men at risk for engaging in sexual risk behavior due in part to the influence of these experiences on men's development of relational schemas characterized by defensiveness and mistrust.
NASA Astrophysics Data System (ADS)
Kh. Beheshti, Hamid
This study is focusing on the application of foam materials in aviation. These materials are being used for acoustic purposes, as padding in the finished interior panels of the aircraft, and as seat cushions. Foams are mostly used in seating applications. Since seat cushion is directly interacting with the body of occupant, it has to be ergonomically comfortable beside of absorbing the energy during the impact. All the seats and seat cushions have to pass regulations defined by Federal Aviation Administration (FAA). In fact, all airplane companies are required to certify the subcomponents of aircrafts before installing them on the main structure, fuselage. Current Federal Aviation Administration Regulations require a dynamic sled test of the entire seat system for certifying the seat cushions. This dynamic testing is required also for replacing the deteriorated cushions with new cushions. This involves a costly and time-consuming certification process. AGATE group has suggested a procedure based on quasi-static testing in order to certify new seat cushions without conducting full-scale dynamic sled testing. AGATE subcomponent methodology involves static tests of the energy-absorbing foam cushions and design validation by conducting a full-scale dynamic seat test. Microscopic and macroscopic studies are necessary to provide a complete understanding about performance of foams during the crash. Much investigation has been done by different sources to obtain the reliable modeling in terms of demonstration of mechanical behavior of foams. However, rate sensitivity of foams needs more attention. A mathematical hybrid dynamic model for the cushion underneath of the human body will be taken into consideration in this research. Analytical and finite element codes such as MADYMO and LS-DYNA codes have the potential to greatly speed up the crashworthy design process, to help certify seats and aircraft to dynamic crash loads, to predict seat and occupant response to impact with the probability of injury, and to evaluate numerous crash scenarios not economically feasible with full-scale crash testing. Therefore, these codes are being used to find the accurate response of spinal load during the impact of model including human body, seat cushion and seat under different acceleration pulses. (Abstract shortened by UMI.)
Post-assembly Modification of Tetrazine-Edged Fe(II)4L6 Tetrahedra.
Roberts, Derrick A; Pilgrim, Ben S; Cooper, Jonathan D; Ronson, Tanya K; Zarra, Salvatore; Nitschke, Jonathan R
2015-08-19
Post-assembly modification (PAM) is a powerful tool for the modular functionalization of self-assembled structures. We report a new family of tetrazine-edged Fe(II)4L6 tetrahedral cages, prepared using different aniline subcomponents, which undergo rapid and efficient PAM by inverse electron-demand Diels-Alder (IEDDA) reactions. Remarkably, the electron-donating or -withdrawing ability of the para-substituent on the aniline moiety influences the IEDDA reactivity of the tetrazine ring 11 bonds away. This effect manifests as a linear free energy relationship, quantified using the Hammett equation, between σ(para) and the rate of the IEDDA reaction. The rate of PAM can thus be adjusted by varying the aniline subcomponent.
NASA Technical Reports Server (NTRS)
Jackson, A. C.; Crocker, J. F.; Ekvall, J. C.; Eudaily, R. R.; Mosesian, B.; Vancleave, R. R.; Vanhamersveld, J.
1981-01-01
The composite fin design consists of two one-piece cocured covers, two one-piece cocured spars and eleven ribs. The lower ribs are truss ribs with graphite/epoxy caps and aluminum truss members. The upper three ribs are a sandwich design with graphite/epoxy face sheets and a syntactic epoxy core. The design achieves a 27% weight saving compared to the metal box. The fastener count has been reduced from over 40,000 to less than 7000. The structural integrity of the composite fin was verified by analysis and test. The static, fail-safe and flutter analyses were completed. An extensive test program has established the material behavior under a range of conditions and critical subcomponents were tested to verify the structural concepts.
Design development of graphite primary structures enables SSTO success
NASA Astrophysics Data System (ADS)
Biagiotti, V. A.; Yahiro, J. S.; Suh, Daniel E.; Hodges, Eric R.; Prior, Donald J.
1997-01-01
This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA's X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman's approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Section Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria.
Design, fabrication and test of graphite/epoxy metering truss structure components, phase 3
NASA Technical Reports Server (NTRS)
1974-01-01
The design, materials, tooling, manufacturing processes, quality control, test procedures, and results associated with the fabrication and test of graphite/epoxy metering truss structure components exhibiting a near zero coefficient of thermal expansion are described. Analytical methods were utilized, with the aid of a computer program, to define the most efficient laminate configurations in terms of thermal behavior and structural requirements. This was followed by an extensive material characterization and selection program, conducted for several graphite/graphite/hybrid laminate systems to obtain experimental data in support of the analytical predictions. Mechanical property tests as well as the coefficient of thermal expansion tests were run on each laminate under study, the results of which were used as the selection criteria for the single most promising laminate. Further coefficient of thermal expansion measurement was successfully performed on three subcomponent tubes utilizing the selected laminate.
Aging and wisdom: age-related changes in economic and social decision making
Lim, Kenneth Teck Kiat; Yu, Rongjun
2015-01-01
World life expectancy is increasing and many populations will begin to age rapidly. The impeding prevalence of a greater number of older people living longer lives will have significant social and economic implications. It is important to understand how older people make economic and social decisions. Aging can be associated with a “phenomenon of decline” and also greater wisdom. This paper seeks to examine the relationship between wisdom and aging. It reviews and connects the behavioral sciences and neuroscience literature on age differences in the following social and economic decision making domains that represent subcomponents of wisdom: (1) prosocial behavior in experimental economic games and competitive situations; (2) resolving social conflicts; (3) emotional homeostasis; (4) self-reflection; (5) dealing effectively with uncertainty in the domains of risk, ambiguity and intertemporal choice. Overall, we find a lack of research into how older people make economic and social decisions. There is, however, some evidence that older adults outperform young adults on certain subcomponents of wisdom, but the exact relationship between old age and each subcomponent remains unclear. A better understanding of these relationships holds the potential to alleviate a wide range of mental health problems, and has broad implications for social policies aimed at the elderly. PMID:26150788
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brigantic, Robert T.; Betzsold, Nick J.; Bakker, Craig KR
In this presentation we overview a methodology for dynamic security risk quantification and optimal resource allocation of security assets for high profile venues. This methodology is especially applicable to venues that require security screening operations such as mass transit (e.g., train or airport terminals), critical infrastructure protection (e.g., government buildings), and largescale public events (e.g., concerts or professional sports). The method starts by decomposing the three core components of risk -- threat, vulnerability, and consequence -- into their various subcomponents. For instance, vulnerability can be decomposed into availability, accessibility, organic security, and target hardness and each of these can bemore » evaluated against the potential threats of interest for the given venue. Once evaluated, these subcomponents are rolled back up to compute the specific value for the vulnerability core risk component. Likewise, the same is done for consequence and threat, and then risk is computed as the product of these three components. A key aspect of our methodology is dynamically quantifying risk. That is, we incorporate the ability to uniquely allow the subcomponents and core components, and in turn, risk, to be quantified as a continuous function of time throughout the day, week, month, or year as appropriate.« less
Suzuki, Tomoko; Miyaki, Koichi; Eguchi, Hisashi; Tsutsumi, Akizumi
2017-09-01
This study aimed to confirm whether autistic traits are normally distributed across a population and to describe their association with the sociodemographic characteristics of Japanese workers. The participants were 2075 workers aged 23-65 years from various parts of Japan. Autistic traits were measured using an abridged Japanese version of the Autism-Spectrum Quotient (AQ-Short). The AQ-Short comprises five subcomponents assessing a fascination for numbers and patterns (numbers/patterns), difficulties with imagination, a preference for routine, difficulties with social skills, and difficulties with switching attention. The five subcomponents of the autistic phenotype as well as the overall autistic phenotype itself were continuously distributed across the sample population of Japanese workers. Men had significantly higher AQ-Short scores than women. AQ-Short scores were not associated with age. Except for the numbers/patterns scores, workers of a lower socioeconomic status had significantly higher AQ-Short scores than their respective counterparts. For the numbers/patterns trait, workers of a higher socioeconomic status scored higher. Workers with low general physical activity had or tended to have higher scores for total and all subcomponent traits, except for the numbers/patterns trait. Generally, the autistic phenotype was more prevalent in workers of a low socioeconomic status, while a particular trait was prevalent among workers of a high socioeconomic status.
Hybridization of active and passive elements for planar photonic components and interconnects
NASA Astrophysics Data System (ADS)
Pearson, M.; Bidnyk, S.; Balakrishnan, A.
2007-02-01
The deployment of Passive Optical Networks (PON) for Fiber-to-the-Home (FTTH) applications currently represents the fastest growing sector of the telecommunication industry. Traditionally, FTTH transceivers have been manufactured using commodity bulk optics subcomponents, such as thin film filters (TFFs), micro-optic collimating lenses, TO-packaged lasers, and photodetectors. Assembling these subcomponents into a single housing requires active alignment and labor-intensive techniques. Today, the majority of cost reducing strategies using bulk subcomponents has been implemented making future reductions in the price of manufacturing FTTH transceivers unlikely. Future success of large scale deployments of FTTH depends on further cost reductions of transceivers. Realizing the necessity of a radically new packaging approach for assembly of photonic components and interconnects, we designed a novel way of hybridizing active and passive elements into a planar lightwave circuit (PLC) platform. In our approach, all the filtering components were monolithically integrated into the chip using advancements in planar reflective gratings. Subsequently, active components were passively hybridized with the chip using fully-automated high-capacity flip-chip bonders. In this approach, the assembly of the transceiver package required no active alignment and was readily suitable for large-scale production. This paper describes the monolithic integration of filters and hybridization of active components in both silica-on-silicon and silicon-on-insulator PLCs.
NASA Astrophysics Data System (ADS)
Bellini, A.; Milone, A. P.; Anderson, J.; Marino, A. F.; Piotto, G.; van der Marel, R. P.; Bedin, L. R.; King, I. R.
2017-08-01
We take advantage of the exquisite quality of the Hubble Space Telescope 26-filter astro-photometric catalog of the core of ω Cen presented in the first paper of this series and the empirical differential-reddening correction presented in the second paper in order to distill the main sequence into its constituent populations. To this end, we restrict ourselves to the five most useful filters: the magic “trio” of F275W, F336W, and F438W, along with F606W and F814W. We develop a strategy for identifying color systems where different populations stand out most distinctly, then we isolate those populations and examine them in other filters where their subpopulations also come to light. In this way, we have identified at least 15 subpopulations, each of which has a distinctive fiducial curve through our five-dimensional photometric space. We confirm the MSa to be split into two subcomponents, and find that both the bMS and the rMS are split into three subcomponents. Moreover, we have discovered two additional MS groups: the MSd (which has three subcomponents) shares similar properties with the bMS, and the MSe (which has four subcomponents) has properties more similar to those of the rMS. We examine the fiducial curves together and use synthetic spectra to infer relative heavy-element, light-element, and helium abundances for the populations. Our findings show that the stellar populations and star formation history of ω Cen are even more complex than inferred previously. Finally, we provide as a supplement to the original catalog a list that identifies for each star which population it is most likely associated with. Based on archival observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by AURA, Inc., under NASA contract NAS 5-26555.
Neurobiology of wisdom: a literature overview.
Meeks, Thomas W; Jeste, Dilip V
2009-04-01
Wisdom is a unique psychological trait noted since antiquity, long discussed in humanities disciplines, recently operationalized by psychology and sociology researchers, but largely unexamined in psychiatry or biology. To discuss recent neurobiological studies related to subcomponents of wisdom identified from several published definitions/descriptions of wisdom by clinical investigators in the field, ie, prosocial attitudes/behaviors, social decision making/pragmatic knowledge of life, emotional homeostasis, reflection/self-understanding, value relativism/tolerance, and acknowledgment of and dealing effectively with uncertainty. Literature focusing primarily on neuroimaging/brain localization and secondarily on neurotransmitters, including their genetic determinants. Studies involving functional neuroimaging or neurotransmitter functioning, examining human (rather than animal) subjects, and identified via a PubMed search using keywords from any of the 6 proposed subcomponents of wisdom were included. Studies were reviewed by both of us, and data considered to be potentially relevant to the neurobiology of wisdom were extracted. Functional neuroimaging permits exploration of neural correlates of complex psychological attributes such as those proposed to comprise wisdom. The prefrontal cortex figures prominently in several wisdom subcomponents (eg, emotional regulation, decision making, value relativism), primarily via top-down regulation of limbic and striatal regions. The lateral prefrontal cortex facilitates calculated, reason-based decision making, whereas the medial prefrontal cortex is implicated in emotional valence and prosocial attitudes/behaviors. Reward neurocircuitry (ventral striatum, nucleus accumbens) also appears important for promoting prosocial attitudes/behaviors. Monoaminergic activity (especially dopaminergic and serotonergic), influenced by several genetic polymorphisms, is critical to certain subcomponents of wisdom such as emotional regulation (including impulse control), decision making, and prosocial behaviors. We have proposed a speculative model of the neurobiology of wisdom involving frontostriatal and frontolimbic circuits and monoaminergic pathways. Wisdom may involve optimal balance between functions of phylogenetically more primitive brain regions (limbic system) and newer ones (prefrontal cortex). Limitations of the putative model are stressed. It is hoped that this review will stimulate further research in characterization, assessment, neurobiology, and interventions related to wisdom.
Wu, Yupeng; Sun, Dandan; Wang, Yong; Wang, Yibao
2016-01-01
The definitive structure and functional role of the inferior fronto-occipital fasciculus (IFOF) are still controversial. In this study, we aimed to investigate the connectivity, asymmetry, and segmentation patterns of this bundle. High angular diffusion spectrum imaging (DSI) analysis was performed on 10 healthy adults and a 90-subject DSI template (NTU-90 Atlas). In addition, a new tractography approach based on the anatomic subregions and two regions of interest (ROI) was evaluated for the fiber reconstructions. More widespread anterior-posterior connections than previous “standard” definition of the IFOF were found. This distinct pathway demonstrated a greater inter-subjects connective variability with a maximum of 40% overlap in its central part. The statistical results revealed no asymmetry between the left and right hemispheres and no significant differences existed in distributions of the IFOF according to sex. In addition, five subcomponents within the IFOF were identified according to the frontal areas of originations. As the subcomponents passed through the anterior floor of the external capsule, the fibers radiated to the posterior terminations. The most common connection patterns of the subcomponents were as follows: IFOF-I, from frontal polar cortex to occipital pole, inferior occipital lobe, middle occipital lobe, superior occipital lobe, and pericalcarine; IFOF-II, from orbito-frontal cortex to occipital pole, inferior occipital lobe, middle occipital lobe, superior occipital lobe, and pericalcarine; IFOF-III, from inferior frontal gyrus to inferior occipital lobe, middle occipital lobe, superior occipital lobe, occipital pole, and pericalcarine; IFOF-IV, from middle frontal gyrus to occipital pole, and inferior occipital lobe; IFOF-V, from superior frontal gyrus to occipital pole, inferior occipital lobe, and middle occipital lobe. Our work demonstrates the feasibility of high resolution diffusion tensor tractography with sufficient sensitivity to elucidate more anatomical details of the IFOF. And we provides a new framework for subdividing the IFOF for better understanding its functional role in the human brain. PMID:27721745
Subunit composition and structure of subcomponent C1q of the first component of human complement.
Reid, K B; Porter, R R
1976-04-01
1. Unreduced human subcomponent C1q was shown by electrophoresis on polyacrylamide gels run in the presence of sodium dodecyl sulphate to be composed of two types of non-covalently linked subunits of apparent mol.wts. 69 000 and 54 000. The ratio of the two subunits was markedly affected by the ionic strength of the applied sample. At a low ionic strength of applied sample, which gave the optimum value for the 54 000-apparent mol.wt. subunit, a ratio of 1.99:1.00 was obtained for the ratio of the 69 000-apparent mol.wt. subunit to the 5400-apparent-mol.wt. subunit. The amount of the 54 000-apparent-mol.wt. subunit detected in the expected position on the gel was found to be inversely proportional to increases in the ionic strength of the applled sample. 2. Human subcomponent C1q on reduction and alkylation, or oxidation, yields equimolar amounts of three chains designated A, B and C [Reid et al. (1972) Biochem. J. 130, 749-763]. The results obtained by Yonemasu & Stroud [(1972) Immunochemistry 9, 545-554], which showed that the 69 000-apparent-mol.wt. subunit was a disulphide-linked dimer of the A and B chains and that the 54 000-apparent-mol.wt. subunit was a disulphide-linked dimer of the C chain, were confirmed. 3. Gel filtration on Sephadex G-200 in 6.0M-guanidinium chloride showed that both types of unreduced subunit were eluted together as a single symmetrical peak of apparent mol.wt. 49 000-50 000 when globular proteins were used as markers. The molecular weights of the oxidized or reduced A, B and C chains have been shown previously to be very similar all being in the range 23 000-24 000 [Reid et al. (1972) Biochem. J. 130, 749-763; Reid (1974) Biochem. J. 141, 189-203]. 4. It is proposed that subcomponent C1q (mol.wt. 410000) is composed of nine non-covalently linked subunits, i.e. six A-B dimers and three C-C dimers. 5. A structure for subcomponent C1q is proposed and is based on the assumption that the collagen-like regions of 78 residues in each of the A, B and C chains are combined to form a triple-helical structure of the same type as is found in collagens.
Social cognition and neurocognition as independent domains in psychosis.
van Hooren, S; Versmissen, D; Janssen, I; Myin-Germeys, I; à Campo, J; Mengelers, R; van Os, J; Krabbendam, L
2008-08-01
Patients with psychosis display alterations in social cognition as well as in the realm of neurocognition. It is unclear, however, to what degree these cognitive domains represent two separate dimensions of liability or the pleiotropic expression of a single deficit. The purpose of the present study was to investigate (i) to what extent alterations in social cognition represent an independent area of vulnerability to psychosis, separate from neurocognitive deficits and (ii) whether social cognition is one construct or can be divided into several subcomponents. Five social cognition and three neurocognitive tasks were completed by 186 participants with different levels of vulnerability for psychosis: 44 patients with psychotic disorder; 47 subjects at familial risk; 41 subjects at psychometric risk and 54 control subjects. The social cognition tasks covered important basic subcomponents of social cognition, i.e. mentalisation (or theory of mind), data gathering bias (jumping to conclusions), source monitoring and attribution style. Neurocognitive tasks assessed speed of information processing, inhibition, cognitive shifting and strategy-driven retrieval from semantic memory. The results of factor analysis suggested that neurocognition and social cognition are two separate areas of vulnerability in psychosis. Furthermore, the social cognition measures lacked significant overlap, suggesting a multidimensional construct. Cognitive liabilities to psychosis are manifold, and include key processes underlying basic person-environment interactions in daily life, independent of cognition quantified by neuropsychological tests.
Computational Fluid Dynamics (CFD) applications in rocket propulsion analysis and design
NASA Technical Reports Server (NTRS)
Mcconnaughey, P. K.; Garcia, R.; Griffin, L. W.; Ruf, J. H.
1993-01-01
Computational Fluid Dynamics (CFD) has been used in recent applications to affect subcomponent designs in liquid propulsion rocket engines. This paper elucidates three such applications for turbine stage, pump stage, and combustor chamber geometries. Details of these applications include the development of a high turning airfoil for a gas generator (GG) powered, liquid oxygen (LOX) turbopump, single-stage turbine using CFD as an integral part of the design process. CFD application to pump stage design has emphasized analysis of inducers, impellers, and diffuser/volute sections. Improvements in pump stage impeller discharge flow uniformity have been seen through CFD optimization on coarse grid models. In the area of combustor design, recent CFD analysis of a film cooled ablating combustion chamber has been used to quantify the interaction between film cooling rate, chamber wall contraction angle, and geometry and their effects of these quantities on local wall temperature. The results are currently guiding combustion chamber design and coolant flow rate for an upcoming subcomponent test. Critical aspects of successful integration of CFD into the design cycle includes a close-coupling of CFD and design organizations, quick turnaround of parametric analyses once a baseline CFD benchmark has been established, and the use of CFD methodology and approaches that address pertinent design issues. In this latter area, some problem details can be simplified while retaining key physical aspects to maintain analytical integrity.
Forscher, Emily C; Zheng, Yan; Ke, Zijun; Folstein, Jonathan; Li, Wen
2016-10-01
Emotion perception is known to involve multiple operations and waves of analysis, but specific nature of these processes remains poorly understood. Combining psychophysical testing and neurometric analysis of event-related potentials (ERPs) in a fear detection task with parametrically varied fear intensities (N=45), we sought to elucidate key processes in fear perception. Building on psychophysics marking fear perception thresholds, our neurometric model fitting identified several putative operations and stages: four key processes arose in sequence following face presentation - fear-neutral categorization (P1 at 100ms), fear detection (P300 at 320ms), valuation (early subcomponent of the late positive potential/LPP at 400-500ms) and conscious awareness (late subcomponent LPP at 500-600ms). Furthermore, within-subject brain-behavior association suggests that initial emotion categorization was mandatory and detached from behavior whereas valuation and conscious awareness directly impacted behavioral outcome (explaining 17% and 31% of the total variance, respectively). The current study thus reveals the chronometry of fear perception, ascribing psychological meaning to distinct underlying processes. The combination of early categorization and late valuation of fear reconciles conflicting (categorical versus dimensional) emotion accounts, lending support to a hybrid model. Importantly, future research could specifically interrogate these psychological processes in various behaviors and psychopathologies (e.g., anxiety and depression). Copyright © 2016 Elsevier Ltd. All rights reserved.
A Low Cost, Self Acting, Liquid Hydrogen Boil-Off Recovery System
NASA Technical Reports Server (NTRS)
Pelfrey, Joy W.; Sharp, Kirk V. (Technical Monitor)
2001-01-01
The purpose of this research was to develop a prototype liquid hydrogen boll-off recovery system. Perform analyses to finalize recovery system cycle, design detail components, fabricate hardware, and conduct sub-component, component, and system level tests leading to the delivery of a prototype system. The design point and off-design analyses identified cycle improvements to increase the robustness of the system by adding a by-pass heat exchanger. Based on the design, analysis, and testing conducted, the recovery system will liquefy 31% of the gaseous boil off from a liquid hydrogen storage tank. All components, including a high speed, miniature turbocompressor, were designed and manufacturing drawings were created. All hardware was fabricated and tests were conducted in air, helium, and hydrogen. Testing validated the design, except for the turbocompressor. A rotor-to-stator clearance issue was discovered as a result of a concentricity tolerance stack-up.
Design and Testing of CO 2 Compression Using Supersonic Shock Wave Technology
DOE Office of Scientific and Technical Information (OSTI.GOV)
Koopman, Aaron
This report summarizes work performed by Ramgen and subcontractors in pursuit of the design and construction of a 10 MW supersonic CO2 compressor and supporting facility. The compressor will demonstrate application of Ramgen’s supersonic compression technology at an industrial scale using CO2 in a closed-loop. The report includes details of early feasibility studies, CFD validation and comparison to experimental data, static test experimental results, compressor and facility design and analyses, and development of aerodynamic tools. A summary of Ramgen's ISC Engine program activity is also included. This program will demonstrate the adaptation of Ramgen's supersonic compression and advanced vortex combustionmore » technology to result in a highly efficient and cost effective alternative to traditional gas turbine engines. The build out of a 1.5 MW test facility to support the engine and associated subcomponent test program is summarized.« less
Recent progress in NASA Langley textile reinforced composites program
NASA Technical Reports Server (NTRS)
Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.
1992-01-01
The NASA LaRC is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. In addition to in-house research, the program was recently expanded to include major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house focus is as follows: development of a science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of design, fabrication and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3D weaving, 2D and 3D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials.
Sub-component modeling for face image reconstruction in video communications
NASA Astrophysics Data System (ADS)
Shiell, Derek J.; Xiao, Jing; Katsaggelos, Aggelos K.
2008-08-01
Emerging communications trends point to streaming video as a new form of content delivery. These systems are implemented over wired systems, such as cable or ethernet, and wireless networks, cell phones, and portable game systems. These communications systems require sophisticated methods of compression and error-resilience encoding to enable communications across band-limited and noisy delivery channels. Additionally, the transmitted video data must be of high enough quality to ensure a satisfactory end-user experience. Traditionally, video compression makes use of temporal and spatial coherence to reduce the information required to represent an image. In many communications systems, the communications channel is characterized by a probabilistic model which describes the capacity or fidelity of the channel. The implication is that information is lost or distorted in the channel, and requires concealment on the receiving end. We demonstrate a generative model based transmission scheme to compress human face images in video, which has the advantages of a potentially higher compression ratio, while maintaining robustness to errors and data corruption. This is accomplished by training an offline face model and using the model to reconstruct face images on the receiving end. We propose a sub-component AAM modeling the appearance of sub-facial components individually, and show face reconstruction results under different types of video degradation using a weighted and non-weighted version of the sub-component AAM.
Kantomaa, Marko T.; Tikanmäki, Marjaana; Kankaanpää, Anna; Vääräsmäki, Marja; Sipola-Leppänen, Marika; Ekelund, Ulf; Hakonen, Harto; Järvelin, Marjo-Riitta; Kajantie, Eero; Tammelin, Tuija H.
2016-01-01
This study examined the association of education level with objectively measured physical activity and sedentary time in young adults. Data from the Finnish ESTER study (2009–2011) (n = 538) was used to examine the association between educational attainment and different subcomponents of physical activity and sedentary time measured using hip-worn accelerometers (ActiGraph GT1M) for seven consecutive days. Overall physical activity, moderate-to-vigorous physical activity (MVPA), light-intensity physical activity and sedentary time were calculated separately for weekdays and weekend days. A latent profile analysis was conducted to identify the different profiles of sedentary time and the subcomponents of physical activity. The educational differences in accelerometer-measured physical activity and sedentary time varied according to the subcomponents of physical activity, and between weekdays and weekend days. A high education level was associated with high MVPA during weekdays and weekend days in both sexes, high sedentary time during weekdays in both sexes, and a low amount of light-intensity physical activity during weekdays in males and during weekdays and weekend days in females. The results indicate different challenges related to unhealthy behaviours in young adults with low and high education: low education is associated with a lack of MVPA, whereas high education is associated with a lack of light-intensity physical activity and high sedentary time especially during weekdays. PMID:27403958
Modal Substructuring of Geometrically Nonlinear Finite-Element Models
Kuether, Robert J.; Allen, Matthew S.; Hollkamp, Joseph J.
2015-12-21
The efficiency of a modal substructuring method depends on the component modes used to reduce each subcomponent model. Methods such as Craig–Bampton have been used extensively to reduce linear finite-element models with thousands or even millions of degrees of freedom down orders of magnitude while maintaining acceptable accuracy. A novel reduction method is proposed here for geometrically nonlinear finite-element models using the fixed-interface and constraint modes of the linearized system to reduce each subcomponent model. The geometric nonlinearity requires an additional cubic and quadratic polynomial function in the modal equations, and the nonlinear stiffness coefficients are determined by applying amore » series of static loads and using the finite-element code to compute the response. The geometrically nonlinear, reduced modal equations for each subcomponent are then coupled by satisfying compatibility and force equilibrium. This modal substructuring approach is an extension of the Craig–Bampton method and is readily applied to geometrically nonlinear models built directly within commercial finite-element packages. The efficiency of this new approach is demonstrated on two example problems: one that couples two geometrically nonlinear beams at a shared rotational degree of freedom, and another that couples an axial spring element to the axial degree of freedom of a geometrically nonlinear beam. The nonlinear normal modes of the assembled models are compared with those of a truth model to assess the accuracy of the novel modal substructuring approach.« less
Modal Substructuring of Geometrically Nonlinear Finite-Element Models
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kuether, Robert J.; Allen, Matthew S.; Hollkamp, Joseph J.
The efficiency of a modal substructuring method depends on the component modes used to reduce each subcomponent model. Methods such as Craig–Bampton have been used extensively to reduce linear finite-element models with thousands or even millions of degrees of freedom down orders of magnitude while maintaining acceptable accuracy. A novel reduction method is proposed here for geometrically nonlinear finite-element models using the fixed-interface and constraint modes of the linearized system to reduce each subcomponent model. The geometric nonlinearity requires an additional cubic and quadratic polynomial function in the modal equations, and the nonlinear stiffness coefficients are determined by applying amore » series of static loads and using the finite-element code to compute the response. The geometrically nonlinear, reduced modal equations for each subcomponent are then coupled by satisfying compatibility and force equilibrium. This modal substructuring approach is an extension of the Craig–Bampton method and is readily applied to geometrically nonlinear models built directly within commercial finite-element packages. The efficiency of this new approach is demonstrated on two example problems: one that couples two geometrically nonlinear beams at a shared rotational degree of freedom, and another that couples an axial spring element to the axial degree of freedom of a geometrically nonlinear beam. The nonlinear normal modes of the assembled models are compared with those of a truth model to assess the accuracy of the novel modal substructuring approach.« less
Lewald, Jörg; Hanenberg, Christina; Getzmann, Stephan
2016-10-01
Successful speech perception in complex auditory scenes with multiple competing speakers requires spatial segregation of auditory streams into perceptually distinct and coherent auditory objects and focusing of attention toward the speaker of interest. Here, we focused on the neural basis of this remarkable capacity of the human auditory system and investigated the spatiotemporal sequence of neural activity within the cortical network engaged in solving the "cocktail-party" problem. Twenty-eight subjects localized a target word in the presence of three competing sound sources. The analysis of the ERPs revealed an anterior contralateral subcomponent of the N2 (N2ac), computed as the difference waveform for targets to the left minus targets to the right. The N2ac peaked at about 500 ms after stimulus onset, and its amplitude was correlated with better localization performance. Cortical source localization for the contrast of left versus right targets at the time of the N2ac revealed a maximum in the region around left superior frontal sulcus and frontal eye field, both of which are known to be involved in processing of auditory spatial information. In addition, a posterior-contralateral late positive subcomponent (LPCpc) occurred at a latency of about 700 ms. Both these subcomponents are potential correlates of allocation of spatial attention to the target under cocktail-party conditions. © 2016 Society for Psychophysiological Research.
Modeling the Earth System, volume 3
NASA Technical Reports Server (NTRS)
Ojima, Dennis (Editor)
1992-01-01
The topics covered fall under the following headings: critical gaps in the Earth system conceptual framework; development needs for simplified models; and validating Earth system models and their subcomponents.
Working memory and executive functions in transient global amnesia.
Quinette, Peggy; Guillery, Bérengère; Desgranges, Béatrice; de la Sayette, Vincent; Viader, Fausto; Eustache, Francis
2003-09-01
Transient global amnesia (TGA) is usually considered to produce a profound impairment of long-term episodic memory, while at the same time sparing working memory. However, this neuropsychological dissociation has rarely been examined in detail. While a few studies have assessed some components of working memory in TGA, the results that have been obtained are far from conclusive. To clarify this issue, we carried out a comprehensive investigation of working memory in 10 patients during a TGA attack. In the first study, we report the results from three patients examined with a battery of neuropsychological tests designed to assess each of the three subcomponents of Baddeley's model of working memory. In a second study, seven different patients underwent neuropsychological investigations that focused specifically on the central executive system, using a protocol derived from a study by Miyake and colleagues. Our findings showed that subcomponents of working memory, such as the phonological loop and visuo-spatial sketch pad, were spared in TGA patients. Specific executive functions that entailed inhibitory control, dual task performance, updating and shifting mechanisms were also found to be normal. However, we found significantly impaired performance for the Brown-Peterson test, and that TGA patients were significantly impaired in the recollection of their episodic memories. They also made reduced numbers of 'remember' compared with 'know' judgments in the episodic memory test several days after TGA. On the basis of our findings, it would appear that the episodic memory deficit during TGA is not related to elementary aspects of executive functioning. Our data also highlight the nature of the cognitive mechanisms involved in the Brown-Peterson task, which may well depend on long-term memory (such as the process of semantic encoding). Lastly, the selective deficit in recollective episodic memories observed in TGA may be principally related to medial temporal lobe abnormalities that have been reported in this syndrome.
Dynamic Impact Testing and Model Development in Support of NASA's Advanced Composites Program
NASA Technical Reports Server (NTRS)
Melis, Matthew E.; Pereira, J. Michael; Goldberg, Robert; Rassaian, Mostafa
2018-01-01
The purpose of this paper is to provide an executive overview of the HEDI effort for NASA's Advanced Composites Program and establish the foundation for the remaining papers to follow in the 2018 SciTech special session NASA ACC High Energy Dynamic Impact. The paper summarizes the work done for the Advanced Composites Program to advance our understanding of the behavior of composite materials during high energy impact events and to advance the ability of analytical tools to provide predictive simulations. The experimental program carried out at GRC is summarized and a status on the current development state for MAT213 will be provided. Future work will be discussed as the HEDI effort transitions from fundamental analysis and testing to investigating sub-component structural concept response to impact events.
Optimization of composite box-beam structures including effects of subcomponent interactions
NASA Technical Reports Server (NTRS)
Ragon, Scott A.; Guerdal, Zafer; Starnes, James H., Jr.
1995-01-01
Minimum mass designs are obtained for a simple box beam structure subject to bending, torque and combined bending/torque load cases. These designs are obtained subject to point strain and linear buckling constraints. The present work differs from previous efforts in that special attention is payed to including the effects of subcomponent panel interaction in the optimal design process. Two different approaches are used to impose the buckling constraints. When the global approach is used, buckling constraints are imposed on the global structure via a linear eigenvalue analysis. This approach allows the subcomponent panels to interact in a realistic manner. The results obtained using this approach are compared to results obtained using a traditional, less expensive approach, called the local approach. When the local approach is used, in-plane loads are extracted from the global model and used to impose buckling constraints on each subcomponent panel individually. In the global cases, it is found that there can be significant interaction between skin, spar, and rib design variables. This coupling is weak or nonexistent in the local designs. It is determined that weight savings of up to 7% may be obtained by using the global approach instead of the local approach to design these structures. Several of the designs obtained using the linear buckling analysis are subjected to a geometrically nonlinear analysis. For the designs which were subjected to bending loads, the innermost rib panel begins to collapse at less than half the intended design load and in a mode different from that predicted by linear analysis. The discrepancy between the predicted linear and nonlinear responses is attributed to the effects of the nonlinear rib crushing load, and the parameter which controls this rib collapse failure mode is shown to be the rib thickness. The rib collapse failure mode may be avoided by increasing the rib thickness above the value obtained from the (linear analysis based) optimizer. It is concluded that it would be necessary to include geometric nonlinearities in the design optimization process if the true optimum in this case were to be found.
Crystal structure of the HA3 subcomponent of Clostridium botulinum type C progenitor toxin.
Nakamura, Toshio; Kotani, Mao; Tonozuka, Takashi; Ide, Azusa; Oguma, Keiji; Nishikawa, Atsushi
2009-01-30
The Clostridium botulinum type C 16S progenitor toxin contains a neurotoxin and several nontoxic components, designated nontoxic nonhemagglutinin (HA), HA1 (HA-33), HA2 (HA-17), HA3a (HA-22-23), and HA3b (HA-53). The HA3b subcomponent seems to play an important role cooperatively with HA1 in the internalization of the toxin by gastrointestinal epithelial cells via binding of these subcomponents to specific oligosaccharides. In this study, we investigated the sugar-binding specificity of the HA3b subcomponent using recombinant protein fused to glutathione S-transferase and determined the three-dimensional structure of the HA3a-HA3b complex based on X-ray crystallography. The crystal structure was determined at a resolution of 2.6 A. HA3b contains three domains, domains I to III, and the structure of domain I resembles HA3a. In crystal packing, three HA3a-HA3b molecules are assembled to form a three-leaved propeller-like structure. The three HA3b domain I and three HA3a alternate, forming a trimer of dimers. In a database search, no proteins with high structural homology to any of the domains (Z score >10) were found. Especially, HA3a and HA3b domain I, mainly composed of beta-sheets, reveal a unique fold. In binding assays, HA3b bound sialic acid with high affinity, but did not bind galactose, N-acetylgalactosamine, or N-acetylglucosamine. The electron density of liganded N-acetylneuraminic acid was determined by crystal soaking. In the sugar-complex structure, the N-acetylneuraminic acid-binding site was located in the cleft formed between domains II and III of HA3b. This report provides the first determination of the three-dimensional structure of the HA3a-HA3b complex and its sialic acid binding site. Our results will provide useful information for elucidating the mechanism of assembly of the C16S toxin and for understanding the interactions with oligosaccharides on epithelial cells and internalization of the botulinum toxin complex.
NASA Technical Reports Server (NTRS)
Seal, Ellis C. (Inventor); Biggs, Jr., Robert William (Inventor); Bodepudi, Venu Prasad (Inventor); Cranston, John A. (Inventor)
2003-01-01
A novel materials technology has been developed and demonstrated for providing a high modulus composite material for use to 1000.degree. F. and above. This material can be produced at 5-20% of the cost of refractory materials, and has higher structural properties. This technology successfully resolves the problem of thermal shock or ply lift, which limits traditional high temperature laminates (such as graphite/polyimide and graphite/phenolic) to temperatures of 550-650.degree. F. in thicker (0.25 and above) laminates. The technology disclosed herein is an enabling technology for the nose for the External Tank (ET) of the Space Shuttle, and has been shown to be capable of withstanding the severe environments encountered by the nose cone through wind tunnel testing, high temperature subcomponent testing, and full scale structural, dynamic, acoustic, and damage tolerance testing.
Design development of graphite primary structures enables SSTO success
DOE Office of Scientific and Technical Information (OSTI.GOV)
Biagiotti, V.A.; Yahiro, J.S.; Suh, D.E.
1997-01-01
This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA{close_quote}s X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman{close_quote}s approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Sectionmore » Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria. {copyright} {ital 1997 American Institute of Physics.}« less
Flexible network wireless transceiver and flexible network telemetry transceiver
Brown, Kenneth D.
2008-08-05
A transceiver for facilitating two-way wireless communication between a baseband application and other nodes in a wireless network, wherein the transceiver provides baseband communication networking and necessary configuration and control functions along with transmitter, receiver, and antenna functions to enable the wireless communication. More specifically, the transceiver provides a long-range wireless duplex communication node or channel between the baseband application, which is associated with a mobile or fixed space, air, water, or ground vehicle or other platform, and other nodes in the wireless network or grid. The transceiver broadly comprises a communication processor; a flexible telemetry transceiver including a receiver and a transmitter; a power conversion and regulation mechanism; a diplexer; and a phased array antenna system, wherein these various components and certain subcomponents thereof may be separately enclosed and distributable relative to the other components and subcomponents.
Consciousness: function and definition.
Niedermeyer, E
1994-07-01
The term "consciousness" plays an enormous role in the clinical assessment of patients and also in psychophysiological considerations. It has often been said that consciousness is a term that defies definition. This lack of definability, however, might be more apparent than real. In the multitude of facets, three main components can be singled out: a) vigilance, b) mental contents and c) selective attention. Vigilance, not to be equated with consciousness, is most amenable to electrophysiological studies. The stages of sleep have fairly well standardized EEG correlates, unlike the comatose states. The overflowing wealth of mental contents is constantly adjusted to momentary needs by the mechanism of selective attention. Awareness is a subcomponent and differs from both vigilance and consciousness. Emotionality is particularly important among the variety of further subcomponents. The time factor must be taken into account in order to understand the dynamics and fluctuations of consciousness.
Wu, Yupeng; Sun, Dandan; Wang, Yong; Wang, Yibao; Ou, Shaowu
2016-01-01
The cingulum bundle (CB) is a critical white matter fiber tract in the brain, which forms connections between the frontal lobe, parietal lobe and temporal lobe. In non-human primates, the CB is actually divided into distinct subcomponents on the basis of corticocortical connections. However, at present, no study has verified similar distinct subdivisions in the human brain. In this study, we reconstructed these distinct subdivisions in the human brain, and determined their exact cortical connections using high definition fiber tracking (HDFT) technique on 10 healthy adults and a 488-subject template from the Human Connectome Project (HCP-488). Fiber dissections were performed to verify tractography results. Five CB segments were identified. CB-I ran from the subrostral areas to the precuneus and splenium, encircling the corpus callosum (CC). CB-II arched around the splenium and extended anteriorly above the CC to the medial aspect of the superior frontal gyrus (SFG). CB-III connected the superior parietal lobule (SPL) and precuneus with the medial aspect of the SFG. CB-IV was a relatively minor subcomponent from the SPL and precuneus to the frontal region. CB-V, the para-hippocampal cingulum, stemmed from the medial temporal lobe and fanned out to the occipital lobes. Our findings not only provide a more accurate and detailed description on the associated architecture of the subcomponents within the CB, but also offer new insights into the functional role of the CB in the human brain.
Thermal Structures Technology Development for Reusable Launch Vehicle Cryogenic Propellant Tanks
NASA Technical Reports Server (NTRS)
Johnson, Theodore F.; Natividad, Roderick; Rivers, H. Kevin; Smith, Russell
1998-01-01
Analytical and experimental studies conducted at the NASA Langley Research Center for investigating integrated cryogenic propellant tank systems for a Reusable Launch Vehicle are described. The cryogenic tanks are investigated as an integrated tank system. An integrated tank system includes the tank wall, cryogenic insulation, Thermal Protection System (TPS) attachment sub-structure, and TPS. Analysis codes are used to size the thicknesses of cryogenic insulation and TPS insulation for thermal loads, and to predict tank buckling strengths at various ring frame spacings. The unique test facilities developed for the testing of cryogenic tank components are described. Testing at cryogenic and high-temperatures verifies the integrity of materials, design concepts, manufacturing processes, and thermal/structural analyses. Test specimens ranging from the element level to the subcomponent level are subjected to projected vehicle operational mechanical loads and temperatures. The analytical and experimental studies described in this paper provide a portion of the basic information required for the development of light-weight reusable cryogenic propellant tanks.
Thermal Structures Technology Development for Reusable Launch Vehicle Cryogenic Propellant Tanks
NASA Technical Reports Server (NTRS)
Johnson, Theodore F.; Natividad, Roderick; Rivers, H. Kevin; Smith, Russell W.
2005-01-01
Analytical and experimental studies conducted at the NASA, Langley Research Center (LaRC) for investigating integrated cryogenic propellant tank systems for a reusable launch vehicle (RLV) are described. The cryogenic tanks are investigated as an integrated tank system. An integrated tank system includes the tank wall, cryogenic insulation, thermal protection system (TPS) attachment sub-structure, and TPS. Analysis codes are used to size the thicknesses of cryogenic insulation and TPS insulation for thermal loads, and to predict tank buckling strengths at various ring frame spacings. The unique test facilities developed for the testing of cryogenic tank components are described. Testing at cryogenic and high-temperatures verifies the integrity of materials, design concepts, manufacturing processes, and thermal/structural analyses. Test specimens ranging from the element level to the subcomponent level are subjected to projected vehicle operational mechanical loads and temperatures. The analytical and experimental studies described in this paper provide a portion of the basic information required for the development of light-weight reusable cryogenic propellant tanks.
Risk Mitigation Testing with the BepiColombo MPO SADA
NASA Astrophysics Data System (ADS)
Zemann, J.; Heinrich, B.; Skulicz, A.; Madsen, M.; Weisenstein, W.; Modugno, F.; Althaus, F.; Panhofer, T.; Osterseher, G.
2013-09-01
A Solar Array (SA) Drive Assembly (SADA) for the BepiColombo mission is being developed and qualified at RUAG Space Zürich (RSSZ). The system is consisting of the Solar Array Drive Mechanism (SADM) and the Solar Array Drive Electronics (SADE) which is subcontracted to RUAG Space Austria (RSA).This paper deals with the risk mitigation activities and the lesson learnt from this development. In specific following topics substantiated by bread board (BB) test results will be addressed in detail:Slipring Bread Board Test: Verification of lifetime and electrical performance of carbon brush technology Potentiometer BB Tests: Focus on lifetime verification (> 650000 revolution) and accuracy requirement SADM EM BB Test: Subcomponent (front-bearing and gearbox) characterization; complete test campaign equivalent to QM test.EM SADM/ SADE Combined Test: Verification of combined performance (accuracy, torque margin) and micro-vibration testing of SADA systemSADE Bread Board Test: Parameter optimization; Test campaign equivalent to QM testThe main improvements identified in frame of BB testing and already implemented in the SADM EM/QM and SADE EQM are:• Improved preload device for gearbox• Improved motor ball-bearing assembly• Position sensor improvements• Calibration process for potentiometer• SADE motor controller optimization toachieve required running smoothness• Overall improvement of test equipment.
Response variability in rapid automatized naming predicts reading comprehension
Li, James J.; Cutting, Laurie E.; Ryan, Matthew; Zilioli, Monica; Denckla, Martha B.; Mahone, E. Mark
2009-01-01
A total of 37 children ages 8 to 14 years, screened for word-reading difficulties (23 with attention-deficit/hyperactivity disorder, ADHD; 14 controls) completed oral reading and rapid automatized naming (RAN) tests. RAN trials were segmented into pause and articulation time and intraindividual variability. There were no group differences on reading or RAN variables. Color- and letter-naming pause times and number-naming articulation time were significant predictors of reading fluency. In contrast, number and letter pause variability were predictors of comprehension. Results support analysis of subcomponents of RAN and add to literature emphasizing intraindividual variability as a marker for response preparation, which has relevance to reading comprehension. PMID:19221923
Evaluation of Silicon Nitride for Brayton Turbine Wheel Application
NASA Technical Reports Server (NTRS)
Freedman, Marc R.
2008-01-01
Silicon nitride (Si3N4) is being evaluated as a risk-reduction alternative for a Jupiter Icy Moons Orbiter Brayton turbine wheel in the event that the Prometheus program design requirements exceed the creep strength of the baseline metallic superalloys. Five Si3N4 ceramics, each processed by a different method, were screened based on the Weibull distribution of bend strength at 1700 F (927 C). Three of the Si3N4 ceramics, Honeywell AS800, Kyocera SN282, and Saint-Gobain NT154, had bend strengths in excess of 87 ksi (600 MPa) at 1700 F (927 C). These were chosen for further assessment and consideration for future subcomponent and component fabrication and testing.
Novel Composites for Wing and Fuselage Applications
NASA Technical Reports Server (NTRS)
Suarez, J. A.; Buttitta, C.
1996-01-01
Design development was successfully completed for textile preforms with continuous cross-stiffened epoxy panels with cut-outs. The preforms developed included 3-D angle interlock weaving of graphite structural fibers impregnated by resin film infiltration (RFI) and shown to be structurally suitable under conditions requiring minimum acquisition costs. Design guidelines/analysis methodology for such textile structures are given. The development was expanded to a fuselage side-panel component of a subsonic commercial airframe and found to be readily scalable. The successfully manufactured panel was delivered to NASA Langley for biaxial testing. This report covers the work performed under Task 3 -- Cross-Stiffened Subcomponent; Task 4 -- Design Guidelines/Analysis of Textile-Reinforced Composites; and Task 5 -- Integrally Woven Fuselage Panel.
The Space Optical Clock project: status and perspectives
NASA Astrophysics Data System (ADS)
Schiller, Stephan; Tino, Guglielmo M.; Sterr, Uwe; Lemonde, Pierre; Görlitz, Axel; Salomon, Christophe
The Space Optical Clocks project aims at operating lattice clocks on the ISS for tests of funda-mental physics and for providing high-accuracy comparisons of future terrestrial optical clocks. A pre-phase-A study (2007-10), funded partially by ESA and DLR, includes the implementa-tion of several optical lattice clock systems using Strontium and Ytterbium as atomic systems and their characterization. Subcomponents of clock demonstrators with the added specification of transportability and using techniques that are suitable for later space use, such as all-solid-state lasers, low power consumption, and compact dimensions, have been developed and are being validated. The talk will give a brief overview over the achieved results and outline future developments.
A semi-analytical refrigeration cycle modelling approach for a heat pump hot water heater
NASA Astrophysics Data System (ADS)
Panaras, G.; Mathioulakis, E.; Belessiotis, V.
2018-04-01
The use of heat pump systems in applications like the production of hot water or space heating makes important the modelling of the processes for the evaluation of the performance of existing systems, as well as for design purposes. The proposed semi-analytical model offers the opportunity to estimate the performance of a heat pump system producing hot water, without using detailed geometrical or any performance data. This is important, as for many commercial systems the type and characteristics of the involved subcomponents can hardly be detected, thus not allowing the implementation of more analytical approaches or the exploitation of the manufacturers' catalogue performance data. The analysis copes with the issues related with the development of the models of the subcomponents involved in the studied system. Issues not discussed thoroughly in the existing literature, as the refrigerant mass inventory in the case an accumulator is present, are examined effectively.
Hedden, Trey; Yoon, Carolyn
2006-09-01
Recent theories have suggested that resistance to interference is a unifying principle of executive function and that individual differences in interference may be explained by executive function (M. J. Kane & R. W. Engle, 2002). Measures of executive function, memory, and perceptual speed were obtained from 121 older adults (ages 63-82). We used structural equation modeling to investigate the relationships of these constructs with interference in a working memory task. Executive function was best described as two related subcomponent processes: shifting and updating goal-relevant representations and inhibition of proactive interference. These subcomponents were distinct from verbal and visual memory and speed. Individual differences in interference susceptibility and recollection were best predicted by shifting and updating and by resistance to proactive interference, and variability in familiarity was predicted by resistance to proactive interference and speed. ((c) 2006 APA, all rights reserved).
Sintered silver joints via controlled topography of electronic packaging subcomponents
Wereszczak, Andrew A.
2014-09-02
Disclosed are sintered silver bonded electronic package subcomponents and methods for making the same. Embodiments of the sintered silver bonded EPSs include topography modification of one or more metal surfaces of semiconductor devices bonded together by the sintered silver joint. The sintered silver bonded EPSs include a first semiconductor device having a first metal surface, the first metal surface having a modified topography that has been chemically etched, grit blasted, uniaxial ground and/or grid sliced connected to a second semiconductor device which may also include a first metal surface with a modified topography, a silver plating layer on the first metal surface of the first semiconductor device and a silver plating layer on the first metal surface of the second semiconductor device and a sintered silver joint between the silver plating layers of the first and second semiconductor devices which bonds the first semiconductor device to the second semiconductor device.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nakamura, Toshio; Tonozuka, Takashi; Kotani, Mao
2007-12-01
HA3, a 70 kDa haemagglutinating protein, is a precursor form of HA3a and HA3b, the subcomponents of Clostridium botulinum type C 16S progenitor toxin. In this report, recombinant HA3 protein was overexpressed in Escherichia coli, purified and crystallized. HA3, a 70 kDa haemagglutinating protein, is a precursor form of HA3a and HA3b, the subcomponents of Clostridium botulinum type C 16S progenitor toxin. In this report, recombinant HA3 protein was overexpressed in Escherichia coli, purified and crystallized. Diffraction data were collected to 2.6 Å resolution and the crystal belonged to the hexagonal space group P6{sub 3}. Matthews coefficient and self-rotation functionmore » calculations indicate that there is probably one molecule of HA3 in the asymmetric unit. A search for heavy-atom derivatives has been undertaken.« less
NASA Astrophysics Data System (ADS)
Alexander, K.; Easterbrook, S. M.
2015-01-01
We analyse the source code of eight coupled climate models, selected from those that participated in the CMIP5 (Taylor et al., 2012) or EMICAR5 (Eby et al., 2013; Zickfeld et al., 2013) intercomparison projects. For each model, we sort the preprocessed code into components and subcomponents based on dependency structure. We then create software architecture diagrams which show the relative sizes of these components/subcomponents and the flow of data between them. The diagrams also illustrate several major classes of climate model design; the distribution of complexity between components, which depends on historical development paths as well as the conscious goals of each institution; and the sharing of components between different modelling groups. These diagrams offer insights into the similarities and differences between models, and have the potential to be useful tools for communication between scientists, scientific institutions, and the public.
NASA Astrophysics Data System (ADS)
Alexander, K.; Easterbrook, S. M.
2015-04-01
We analyze the source code of eight coupled climate models, selected from those that participated in the CMIP5 (Taylor et al., 2012) or EMICAR5 (Eby et al., 2013; Zickfeld et al., 2013) intercomparison projects. For each model, we sort the preprocessed code into components and subcomponents based on dependency structure. We then create software architecture diagrams that show the relative sizes of these components/subcomponents and the flow of data between them. The diagrams also illustrate several major classes of climate model design; the distribution of complexity between components, which depends on historical development paths as well as the conscious goals of each institution; and the sharing of components between different modeling groups. These diagrams offer insights into the similarities and differences in structure between climate models, and have the potential to be useful tools for communication between scientists, scientific institutions, and the public.
Brain activation patterns elicited by the 'Faces Symbol Test' -- a pilot fMRI study.
Grabner, Rh; Popotnig, F; Ropele, S; Neuper, C; Gorani, F; Petrovic, K; Ebner, F; Strasser-Fuchs, S; Fazekas, F; Enzinger, C
2008-04-01
The Faces Symbol Test (FST) has recently been proposed as a brief and patient-friendly screening instrument for the assessment of cognitive dysfunction in patients with multiple sclerosis (MS). However, in contrast to well-established MS screening tests such as the Paced Auditory Serial Addition Test, the neural correlates of the FST have not been investigated so far. In the present study, we developed a functional MRI (fMRI) version of the FST to provide first data on brain regions and networks involved in this test. A sample of 19 healthy participants completed a version of the FST adapted for fMRI, requiring matching of faces and symbols in a multiple choice test and two further experimental conditions drawing on cognitive subcomponents (face matching and symbol matching). Imaging data showed a differential involvement of a fronto-parieto-occipital network in the three conditions. The most demanding FST condition elicited brain activation patterns related with sustained attention and executive control. These results suggest that the FST recruits brain networks critical for higher-order cognitive functions often impaired in MS patients.
Application of damage tolerance methodology in certification of the Piaggio P-180 Avanti
NASA Technical Reports Server (NTRS)
Johnson, Jerry
1992-01-01
The Piaggio P-180 Avanti, a twin pusher-prop engine nine-passenger business aircraft was certified in 1990, to the requirements of FAR Part 23 and Associated Special Conditions for Composite Structure. Certification included the application of a damage tolerant methodology to the design of the composite forward wing and empennage (vertical fin, horizontal stabilizer, tailcone, and rudder) structure. This methodology included an extensive analytical evaluation coupled with sub-component and full-scale testing of the structure. The work from the Damage Tolerance Analysis Assessment was incorporated into the full-scale testing. Damage representing hazards such as dropped tools, ground equipment, handling, and runway debris, was applied to the test articles. Additional substantiation included allowing manufacturing discrepancies to exist unrepaired on the full-scale articles and simulated bondline failures in critical elements. The importance of full-scale testing in the critical environmental conditions and the application of critical damage are addressed. The implication of damage tolerance on static and fatigue testing is discussed. Good correlation between finite element solutions and experimental test data was observed.
Bocquillon, Perrine; Bourriez, Jean-Louis; Palmero-Soler, Ernesto; Defebvre, Luc; Derambure, Philippe; Dujardin, Kathy
2015-01-01
Introduction The selection of task-relevant information requires both the focalization of attention on the task and resistance to interference from irrelevant stimuli. A previous study using the P3 component of the event-related potentials suggested that a reduced ability to resist interference could be responsible for attention disorders at early stages of Parkinson’s disease (PD), with a possible role of the dorsolateral prefrontal cortex (DLPFC). Methods Our objective was to better determine the origin of this impairment, by studying an earlier ERP component, the N2, and its subcomponents, as they reflect early inhibition processes and as they are known to have sources in the anterior cingulate cortex (ACC), which is involved together with the DLPFC in inhibition processes. Fifteen early-stage PD patients and 15 healthy controls (HCs) performed a three-stimulus visual oddball paradigm, consisting in detecting target inputs amongst standard stimuli, while resisting interference from distracter ones. A 128-channel electroencephalogram was recorded during this task and the generators of the N2 subcomponents were identified using standardized weighted low-resolution electromagnetic tomography (swLORETA). Results PD patients displayed fewer N2 generators than HCs in both the DLPFC and the ACC, for all types of stimuli. In contrast to controls, PD patients did not show any differences between their generators for different N2 subcomponents. Conclusion Our data suggest that impaired inhibition in PD results from dysfunction of the DLPFC and the ACC during the early stages of attentional processes. PMID:26135906
NASA Astrophysics Data System (ADS)
Ozbulut, Osman E.; Hurlebaus, Stefan
2011-11-01
This paper proposes a re-centering variable friction device (RVFD) for control of civil structures subjected to near-field earthquakes. The proposed hybrid device has two sub-components. The first sub-component of this hybrid device consists of shape memory alloy (SMA) wires that exhibit a unique hysteretic behavior and full recovery following post-transformation deformations. The second sub-component of the hybrid device consists of variable friction damper (VFD) that can be intelligently controlled for adaptive semi-active behavior via modulation of its voltage level. In general, installed SMA devices have the ability to re-center structures at the end of the motion and VFDs can increase the energy dissipation capacity of structures. The full realization of these devices into a singular, hybrid form which complements the performance of each device is investigated in this study. A neuro-fuzzy model is used to capture rate- and temperature-dependent nonlinear behavior of the SMA components of the hybrid device. An optimal fuzzy logic controller (FLC) is developed to modulate voltage level of VFDs for favorable performance in a RVFD hybrid application. To obtain optimal controllers for concurrent mitigation of displacement and acceleration responses, tuning of governing fuzzy rules is conducted by a multi-objective heuristic optimization. Then, numerical simulation of a multi-story building is conducted to evaluate the performance of the hybrid device. Results show that a re-centering variable friction device modulated with a fuzzy logic control strategy can effectively reduce structural deformations without increasing acceleration response during near-field earthquakes.
AIRWAY EPITHELIAL EFFECTS OF PARTICULATE POLLUTANTS: ROLE OF METAL INTERACTIONS
Numerous epidemiologic studies have demonstrated positive associations with particulate matter (PM) air pollution and daily respiratory morbidity - including exacerbations of asthma. Data are needed to elucidate which PM subcomponents may be mediating disease exacerbation in ind...
Correlates of healthcare and financial decision making among older adults without dementia.
Stewart, Christopher C; Yu, Lei; Wilson, Robert S; Bennett, David A; Boyle, Patricia A
2018-03-22
Healthcare and financial decision making among older persons has been previously associated with cognition, health and financial literacy, and risk aversion; however, the manner by which these resources support decision making remains unclear, as past studies have not systematically investigated the pathways linking these resources with decision making. In the current study, we use path analysis to examine the direct and indirect pathways linking age, education, cognition, literacy, and risk aversion with decision making. We also decomposed literacy into its subcomponents, conceptual knowledge and numeracy, in order to examine their associations with decision making. Participants were 937 community-based older adults without dementia from the Rush Memory and Aging Project who completed a battery of cognitive tests and assessments of healthcare and financial decision making, health and financial literacy, and risk aversion. Age and education exerted effects on decision making, but nearly two thirds of their effects were indirect, working mostly through cognition and literacy. Cognition exerted a strong direct effect on decision making and a robust indirect effect working primarily through literacy. Literacy also exerted a powerful direct effect on decision making, as did its subcomponents, conceptual knowledge and numeracy. The direct effect of risk aversion was comparatively weak. In addition to cognition, health and financial literacy emerged as independent and primary correlates of healthcare and financial decision making. These findings suggest specific actions that might be taken to optimize healthcare and financial decision making and, by extension, improve health and well-being in advanced age. (PsycINFO Database Record (c) 2018 APA, all rights reserved).
Vaitkevičius, Arūnas; Kaubrys, Gintaras; Audronytė, Eglė
2015-07-03
Latency of P300 subcomponent of event-related potentials (ERPs) increases in Alzheimer disease (AD) patients, which correlate well with cognitive impairment. Cholinesterase inhibitors (ChEIs) reduce P300 latency in AD patients with parallel improvement in cognition. It is not known whether N200 response to ChEIs is similar to that of P300. The aim of this study was to evaluate and compare characteristics of P300 and N200 in AD patients, treatment-naïve and on stable donepezil treatment, matched by age, education, sex, and cognitive function. We recruited 22 consecutive treatment-naïve AD patients (AD-N group), 22 AD patients treated with a stable donepezil dose of 10 mg/day for at least 3 months (AD-T group), and 50 healthy controls were recruited. Neuropsychological testing (MMSE, ADAS-Cog, and additional tests) and ERP recording was performed and analyzed. All groups did not differ according to age, duration of education, or sex (p>0.05). AD-N and AD-T groups did not differ according to cognitive function. The AD-T group had longer duration of disease than the AD-N group (p<0.001). The AD-T and AD-N groups did not differ in P300 latencies (p=0.49). N200 latency was longer in the AD-T group (p<0.001). The general linear model showed that significant predictors of P300 latency were age (p=0.019) and AD treatment status (p<0.001). Duration of AD was a significant predictor of N200 latency (p=0.004). The response of N200 latency to donepezil treatment differs from the response of P300. P300 is a better marker of ChEI treatment-dependent cognitive functions. N200 is more dependent on the duration of AD.
NASA Technical Reports Server (NTRS)
Wingate, Robert J.
2012-01-01
After the launch scrub of Space Shuttle mission STS-133 on November 5, 2010, large cracks were discovered in two of the External Tank intertank stringers. The NASA Marshall Space Flight Center, as managing center for the External Tank Project, coordinated the ensuing failure investigation and repair activities with several organizations, including the manufacturer, Lockheed Martin. To support the investigation, the Marshall Space Flight Center formed an ad-hoc stress analysis team to complement the efforts of Lockheed Martin. The team undertook six major efforts to analyze or test the structural behavior of the stringers. Extensive finite element modeling was performed to characterize the local stresses in the stringers near the region of failure. Data from a full-scale tanking test and from several subcomponent static load tests were used to confirm the analytical conclusions. The analysis and test activities of the team are summarized. The root cause of the stringer failures and the flight readiness rationale for the repairs that were implemented are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keller, Todd M.; Benjamin, Jacob S.; Wright, Virginia L.
This paper will describe a practical methodology for understanding the cyber risk of a digital asset. This research attempts to gain a greater understanding of the cyber risk posed by a hardware-based computer asset by considering it as a sum of its hardware and software based sub-components.
Williams, Reed G; Klamen, Debra L; Mayer, David; Valaski, Maureen; Roberts, Nicole K
2007-10-01
Skill acquisition and maintenance requires spaced deliberate practice. Assessing medical students' physical examination performance ability is resource intensive. The authors assessed the nature and size of physical examination performance samples necessary to accurately estimate total physical examination skill. Physical examination assessment data were analyzed from second year students at the University of Illinois College of Medicine at Chicago in 2002, 2003, and 2004 (N = 548). Scores on subgroups of physical exam maneuvers were compared with scores on the total physical exam, to identify sound predictors of total test performance. Five exam subcomponents were sufficiently correlated to overall test performance and provided adequate sensitivity and specificity to serve as a means to prompt continued student review and rehearsal of physical examination technical skills. Selection and administration of samples of the total physical exam provide a resource-saving approach for promoting and estimating overall physical examination skills retention.
Spatial transformation abilities and their relation to later mathematics performance.
Frick, Andrea
2018-04-10
Using a longitudinal approach, this study investigated the relational structure of different spatial transformation skills at kindergarten age, and how these spatial skills relate to children's later mathematics performance. Children were tested at three time points, in kindergarten, first grade, and second grade (N = 119). Exploratory factor analyses revealed two subcomponents of spatial transformation skills: one representing egocentric transformations (mental rotation and spatial scaling), and one representing allocentric transformations (e.g., cross-sectioning, perspective taking). Structural equation modeling suggested that egocentric transformation skills showed their strongest relation to the part of the mathematics test tapping arithmetic operations, whereas allocentric transformations were strongly related to Numeric-Logical and Spatial Functions as well as geometry. The present findings point to a tight connection between early mental transformation skills, particularly the ones requiring a high level of spatial flexibility and a strong sense for spatial magnitudes, and children's mathematics performance at the beginning of their school career.
Integrated function nonimaging concentrating collector tubes for solar thermal energy
NASA Astrophysics Data System (ADS)
Winston, R.; Ogallagher, J. J.
1982-09-01
A substantial improvement in optical efficiency over contemporary external reflector evacuated tube collectors has been achieved by integrating the reflector surface into the outer glass envelope. Described are the design fabrication and test results for a prototype collector based on this concept. A comprehensive test program to measure performance and operational characteristics of a 2 sq m panel (45 tubes) has been completed. Efficiencies above 50% relative to beam at 200 C have been repeatedly demonstrated. Both the instantaneous and long term average performance of this totally stationary solar collector are comparable to those for tracking line focus parabolic troughs. The yield, reliability and stability of performance achieved have been excellent. Subcomponent assemblies and fabrication procedures have been used which are expected to be compatible with high volume production. The collector has a wide variety of applications in the 100 to 300 C range including industrial progress heat, air conditioning and Rankine engine operation.
Energy Efficient Engine (E3) combustion system component technology performance report
NASA Technical Reports Server (NTRS)
Burrus, D. L.; Chahrour, C. A.; Foltz, H. L.; Sabla, P. E.; Seto, S. P.; Taylor, J. R.
1984-01-01
The Energy Efficient Engine (E3) combustor effort was conducted as part of the overall NASA/GE E3 Program. This effort included the selection of an advanced double-annular combustion system design. The primary intent of this effort was to evolve a design that meets the stringent emissions and life goals of the E3, as well as all of the usual performance requirements of combustion systems for modern turbofan engines. Numerous detailed design studies were conducted to define the features of the combustion system design. Development test hardware was fabricated, and an extensive testing effort was undertaken to evaluate the combustion system subcomponents in order to verify and refine the design. Technology derived from this effort was incorporated into the engine combustion hardware design. The advanced engine combustion system was then evaluated in component testing to verify the design intent. What evolved from this effort was an advanced combustion system capable of satisfying all of the combustion system design objectives and requirements of the E3.
Test and Analysis of Sub-Components of Aluminum-Lithium Alloy Cylinders
NASA Technical Reports Server (NTRS)
Haynie, Waddy T.; Chunchu, Prasad B.; Satyanarayana, Arunkumar; Hilburger, Mark W.; Smith, Russell W.
2012-01-01
Integrally machined blade-stiffened panels subjected to an axial compressive load were tested and analyzed to observe the buckling, crippling, and postcrippling response of the panels. The panels were fabricated from aluminum-lithium alloys 2195 and 2050, and both alloys have reduced material properties in the short transverse material direction. The tests were designed to capture a failure mode characterized by the stiffener separating from the panel in the postbuckling range. This failure mode is attributed to the reduced properties in the short transverse direction. Full-field measurements of displacements and strains using three-dimensional digital image correlation systems and local measurements using strain gages were used to capture the deformation of the panel leading up to the failure of the panel for specimens fabricated from 2195. High-speed cameras were used to capture the initiation of the failure. Finite element models were developed using an isotropic strain-hardening material model. Good agreement was observed between the measured and predicted responses for both alloys.
Advanced composite aileron for L-1011 transport aircraft: Design and analysis
NASA Technical Reports Server (NTRS)
Griffin, C. F.; Fogg, L. D.; Dunning, E. G.
1981-01-01
Detail design of the composite aileron has been completed. The aileron design is a multi-rib configuration with single piece upper and lower covers mechanically fastened to the substructure. Covers, front, spar and ribs are fabricated with graphite/epoxy tape or fabric composite material. The design has a weight savings of 23 percent compared to the aluminum aileron. The composite aileron has 50 percent fewer fasteners and parts than the metal aileron and is predicted to be cost competitive. Structural integrity of the composite aileron was verified by structural analysis and an extensive test program. Static, failsafe, and vibration analyses have been conducted on the composite aileron using finite element models and specialized computer programs for composite material laminates. The fundamental behavior of the composite materials used in the aileron was determined by coupon tests for a variety of environmental conditions. Critical details of the design were interrogated by static and fatigue tests on full-scale subcomponents and subassemblies of the aileron.
NASA Technical Reports Server (NTRS)
Littell, Justin D.
2014-01-01
A design for a novel light-weight conical shaped energy absorbing (EA) composite subfloor structure is proposed. This composite EA is fabricated using repeated alternating patterns of a conical geometry to form long beam structures which can be implemented as aircraft subfloor keel beams or frame sections. The geometrical features of this conical design, along with the hybrid composite materials used in the manufacturing process give a strength tailored to achieve a constant 25-40 g sustained crush load, small peak crush loads and long stroke limits. This report will discuss the geometrical design and fabrication methods, along with results from static and dynamic crush testing of 12-in. long subcomponents.
49 CFR 661.11 - Rolling stock procurements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... article, material, or supply, whether manufactured or unmanufactured, that is directly incorporated into... into a new and functionally different article. (f) Except as provided in paragraph (k) of this section, a subcomponent is any article, material, or supply, whether manufactured or unmanufactured, that is...
49 CFR 661.11 - Rolling stock procurements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... article, material, or supply, whether manufactured or unmanufactured, that is directly incorporated into... into a new and functionally different article. (f) Except as provided in paragraph (k) of this section, a subcomponent is any article, material, or supply, whether manufactured or unmanufactured, that is...
Systems Engineering News | Wind | NREL
News Systems Engineering News The Wind Plant Optimization and Systems Engineering newsletter covers range from multi-disciplinary design analysis and optimization of wind turbine sub-components to wind plant optimization and uncertainty analysis to concurrent engineering and financial engineering
Defining and assessing wisdom: a review of the literature.
Bangen, Katherine J; Meeks, Thomas W; Jeste, Dilip V
2013-12-01
With increasing longevity and a growing focus on successful aging, there has been a recent growth of research designed to operationalize and assess wisdom. We aimed to (1) investigate the degree of overlap among empirical definitions of wisdom, (2) identify the most commonly cited wisdom subcomponents, (3) examine the psychometric properties of existing assessment instruments, and (4) investigate whether certain assessment procedures work particularly well in tapping the essence of subcomponents of the various empirical definitions. We searched PsychINFO-indexed articles published through May 2012 and their bibliographies. Studies were included if they were published in a peer-reviewed journal and (1) proposed a definition of wisdom or (2) discussed the development or validation of an instrument designed to assess wisdom. Thirty-one articles met inclusion criteria. Despite variability among the 24 reviewed definitions, there was significant overlap. Commonly cited subcomponents of wisdom included knowledge of life, prosocial values, self-understanding, acknowledgment of uncertainty, emotional homeostasis, tolerance, openness, spirituality, and sense of humor. Published reports describing the psychometric properties of nine instruments varied in comprehensiveness but most measures were examined for selected types of reliability and validity, which were generally acceptable. Given limitations of self-report procedures, an approach integrating multiple indices (e.g., self-report and performance-based measures) may better capture wisdom. Significant progress in the empirical study of wisdom has occurred over the past four decades; however, much needs to be done. Future studies with larger, more diverse samples are needed to determine the generalizability, usefulness, and clinical applicability of these definitions and assessment instruments. Such work will have relevance for the fields of geriatrics, psychiatry, psychology, sociology, education, and public health, among others. Copyright © 2013 American Association for Geriatric Psychiatry. All rights reserved.
Phung, Kieu T. T.; Chaaya, Monique; Waldemar, Gunhild; Atweh, Samir; Asmar, Khalil; Ghusn, Husam; Karam, Georges; Sawaya, Raja; Khoury, Rose Mary; Zeinaty, Ibrahim; Salman, Sandrine; Hammoud, Salem; Radwan, Wael; Bassil, Nazem; Prince, Martin
2014-01-01
Objectives In the North Africa and Middle East region, the illiteracy rates among older people are high, posing a great challenge to cognitive assessment. Validated diagnostic instruments for dementia in Arabic are lacking, hampering the development of dementia research in the region. The study aimed at validating the Arabic version of the 10/66 Dementia Research Group (DRG) diagnostic assessment for dementia to determine if it is suitable for case ascertainment in epidemiological research. Methods 244 participants older than 65 years were included, 100 with normal cognition and 144 with mild to moderate dementia. Dementia was diagnosed by clinicians according to DSM-IV criteria. Depression was diagnosed using the Geriatric Mental State. Trained interviewers blind to the cognitive status of the participants administered the 10/66 DRG diagnostic assessment to the participants and interviewed the caregivers. The discriminatory ability of the 10/66 DRG assessment and its subcomponents were evaluated against the clinical diagnoses. Results Half of the participants had no formal education and 49% of them were depressed. The 10/66 DRG diagnostic assessment showed excellent sensitivity (92.0%), specificity (95.1%), positive predictive value (PPV, 92.9%), and low false positive rates (FPR) among controls with no formal education (8.1%) and depression (5.6%). Each subcomponent of the 10/66 DRG diagnostic assessment independently predicted dementia diagnosis. The predictive ability of the 10/66 DRG assessment was superior to that of its subcomponents. Conclusion 10/66 DRG diagnostic assessment for dementia is well suited for case ascertainment in epidemiological studies among Arabic speaking older population with high prevalence of illiteracy. PMID:24771602
Brydges, Christopher R; Barceló, Francisco
2018-01-01
Cognitive control warrants efficient task performance in dynamic and changing environments through adjustments in executive attention, stimulus and response selection. The well-known P300 component of the human event-related potential (ERP) has long been proposed to index "context-updating"-critical for cognitive control-in simple target detection tasks. However, task switching ERP studies have revealed both target P3 (300-350 ms) and later sustained P3-like potentials (400-1,200 ms) to first targets ensuing transition cues, although it remains unclear whether these target P3-like potentials also reflect context updating operations. To address this question, we applied novel single-trial EEG analyses-residue iteration decomposition (RIDE)-in order to disentangle target P3 sub-components in a sample of 22 young adults while they either repeated or switched (updated) task rules. The rationale was to revise the context updating hypothesis of P300 elicitation in the light of new evidence suggesting that "the context" consists of not only the sensory units of stimulation, but also associated motor units, and intermediate low- and high-order sensorimotor units, all of which may need to be dynamically updated on a trial by trial basis. The results showed functionally distinct target P3-like potentials in stimulus-locked, response-locked, and intermediate RIDE component clusters overlying parietal and frontal regions, implying multiple functionally distinct, though temporarily overlapping context updating operations. These findings support a reformulated version of the context updating hypothesis, and reveal a rich family of distinct target P3-like sub-components during the reactive control of target detection in task-switching, plausibly indexing the complex and dynamic workings of frontoparietal cortical networks subserving cognitive control.
Neurobiology of Wisdom?: A Literature Overview
Meeks, Thomas W.; Jeste, Dilip V.
2013-01-01
Context Wisdom is a unique psychological trait noted since antiquity, long discussed in humanities disciplines, recently operationalized by psychology and sociology researchers, but largely unexamined in psychiatry or biology. Objective We discuss recent neurobiological studies related to subcomponents of wisdom identified from several published definitions/descriptions of wisdom by clinical investigators in the field – i.e., prosocial attitudes/behaviors, social decision-making/pragmatic knowledge of life, emotional homeostasis, reflection/self-understanding, value relativism/tolerance, and acknowledgement of and dealing effectively with uncertainty. Design Literature overview focusing primarily on neuroimaging/brain localization and secondarily on neurotransmitters, including their genetic determinants. Results Functional neuroimaging permits exploration of neural correlates of complex psychological attributes such as those proposed to comprise wisdom. The prefrontal cortex figures prominently in several wisdom subcomponents (e.g., emotional regulation, decision-making, value relativism), primarily via top-down regulation of limbic and striatal regions. The lateral prefrontal cortex facilitates calculated, reason-based decision-making, whereas the medial prefrontal cortex is implicated in emotional valence and prosocial attitudes/behaviors. Reward neurocircuitry (ventral striatum, nucleus accumbens) also appears important for promoting prosocial attitudes/behaviors. Monoaminergic activity (especially dopaminergic and serotonergic), influenced by several genetic polymorphisms, is critical to certain subcomponents of wisdom such as emotional regulation (including impulse control), decision-making, and prosocial behaviors. Conclusions We have proposed a speculative model of the neurobiology of wisdom involving fronto-striatal and fronto-limbic circuits and monoaminergic pathways. Wisdom may involve optimal balance between functions of phylogenetically more primitive brain regions (limbic system) and newer ones (prefrontal cortex). Limitations of the putative model are stressed. It is hoped that this review will stimulate further research in characterization, assessment, neurobiology, and interventions related to wisdom. PMID:19349305
Brydges, Christopher R.; Barceló, Francisco
2018-01-01
Cognitive control warrants efficient task performance in dynamic and changing environments through adjustments in executive attention, stimulus and response selection. The well-known P300 component of the human event-related potential (ERP) has long been proposed to index “context-updating”—critical for cognitive control—in simple target detection tasks. However, task switching ERP studies have revealed both target P3 (300–350 ms) and later sustained P3-like potentials (400–1,200 ms) to first targets ensuing transition cues, although it remains unclear whether these target P3-like potentials also reflect context updating operations. To address this question, we applied novel single-trial EEG analyses—residue iteration decomposition (RIDE)—in order to disentangle target P3 sub-components in a sample of 22 young adults while they either repeated or switched (updated) task rules. The rationale was to revise the context updating hypothesis of P300 elicitation in the light of new evidence suggesting that “the context” consists of not only the sensory units of stimulation, but also associated motor units, and intermediate low- and high-order sensorimotor units, all of which may need to be dynamically updated on a trial by trial basis. The results showed functionally distinct target P3-like potentials in stimulus-locked, response-locked, and intermediate RIDE component clusters overlying parietal and frontal regions, implying multiple functionally distinct, though temporarily overlapping context updating operations. These findings support a reformulated version of the context updating hypothesis, and reveal a rich family of distinct target P3-like sub-components during the reactive control of target detection in task-switching, plausibly indexing the complex and dynamic workings of frontoparietal cortical networks subserving cognitive control. PMID:29515383
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dorman, Claire E.; Guhathakurta, Puragra; Widrow, Lawrence M., E-mail: cdorman@ucolick.org, E-mail: raja@ucolick.org, E-mail: widrow@astro.queensu.ca
We characterize the bulge, disk, and halo subcomponents in the Andromeda galaxy (M31) over the radial range 4 kpc < R {sub proj} < 225 kpc. The cospatial nature of these subcomponents renders them difficult to disentangle using surface brightness (SB) information alone, especially interior to ∼20 kpc. Our new decomposition technique combines information from the luminosity function (LF) of over 1.5 million bright (20 < m {sub 814W} < 22) stars from the Panchromatic Hubble Andromeda Treasury survey, radial velocities of over 5000 red giant branch stars in the same magnitude range from the Spectroscopic and Photometric Landscape ofmore » Andromeda's Stellar Halo survey, and integrated I-band SB profiles from various sources. We use an affine-invariant Markov chain Monte Carlo algorithm to fit an appropriate toy model to these three data sets. The bulge, disk, and halo SB profiles are modeled as a Sérsic, exponential, and cored power law, respectively, and the LFs are modeled as broken power laws. We present probability distributions for each of 32 parameters describing the SB profiles and LFs of the three subcomponents. We find that the number of stars with a disk-like LF is 5.2% ± 2.1% larger than the number with disk-like (dynamically cold) kinematics, suggesting that some stars born in the disk have been dynamically heated to the point that they are kinematically indistinguishable from halo members. This is the first kinematical evidence for a 'kicked-up disk' halo population in M31. The fraction of kicked-up disk stars is consistent with that found in simulations. We also find evidence for a radially varying disk LF, consistent with a negative metallicity gradient in the stellar disk.« less
Sugar-binding sites of the HA1 subcomponent of Clostridium botulinum type C progenitor toxin.
Nakamura, Toshio; Tonozuka, Takashi; Ide, Azusa; Yuzawa, Takayuki; Oguma, Keiji; Nishikawa, Atsushi
2008-02-22
Clostridium botulinum type C 16S progenitor toxin contains a hemagglutinin (HA) subcomponent, designated HA1, which appears to play an important role in the effective internalization of the toxin in gastrointestinal epithelial cells and in creating a broad specificity for the oligosaccharide structure that corresponds to various targets. In this study, using the recombinant protein fused to glutathione S-transferase, we investigated the binding specificity of the HA1 subcomponent to sugars and estimated the binding sites of HA1 based on X-ray crystallography and soaking experiments using various sugars. N-Acetylneuraminic acid, N-acetylgalactosamine, and galactose effectively inhibited the binding that occurs between glutathione S-transferase-HA1 and mucins, whereas N-acetylglucosamine and glucose did not inhibit it. The crystal structures of HA1 complex with N-acetylneuraminic acid, N-acetylgalactosamine, and galactose were also determined. There are two sugar-binding sites, sites I and II. Site I corresponds to the electron densities noted for all sugars and is located at the C-terminal beta-trefoil domain, while site II corresponds to the electron densities noted only for galactose. An aromatic amino acid residue, Trp176, at site I has a stacking interaction with the hexose ring of the sugars. On the other hand, there is no aromatic residue at site II; thus, the interaction with galactose seems to be poor. The double mutant W176A at site I and D271F at site II has no avidity for N-acetylneuraminic acid but has avidity for galactose. In this report, the binding specificity of botulinum C16S toxin HA1 to various sugars is demonstrated based on its structural features.
Assessment of the Contribution of Dietary and Beverage Intake Quality to Obesity Development.
Bilici, Saniye; Mortaş, Hande; Kocaadam, Betül; Köksal, Eda
2018-04-13
Low dietary quality is an important indicator of unhealthy eating patterns that can lead to some consequences such as obesity, so policy is a very powerful tool that can affect the consumption of both healthy and unhealthy foods. Indices that assess whether nutritional policies are applied contribute to the assessment of the quality of the population's diet. This study was conducted to investigate the quality of diets and beverages consumed by Turkish adults, and the factors affecting them. This cross-sectional descriptive study was conducted on 352 adults aged between 18 and 58 years. The quality of diet and beverage was measured through the Healthy Eating Index-2010 (HEI) and Healthy Beverage Index (HBI), respectively, using 2-day (weekday and weekend) dietary recall data. The total HBI scores were 79.1 ± 11.8 and 81.0 ± 11.6; total HEI-2010 scores were 45.9 ± 12.3 and 52.3 ± 11.0, of men and women, respectively (p < 0.05). The women had significantly higher scores than that of the men in the HEI-2010 subcomponent of empty calories (p > 0.05). Sugar-sweetened beverage (HBI subcomponent) was significantly correlated with the scores of HEI-2010 and empty calorie (HEI-2010 subcomponent), as expected (p < 0.01). The caloric beverages contributed ∼133.6 kcal/d to the total caloric intake. The mean contribution of beverages to total daily energy intake of participants was found to be at the suggestion level. This result is rewarding when the relationship of sugar-sweetened beverages scores with the scores of HEI and empty calories is considered.
Quantitative site type delineation for pastures in the northeastern United States
USDA-ARS?s Scientific Manuscript database
The Grazing Lands component of the USDA-NRCS Conservation Effects Assessment Project (CEAP) is a national assessment of the environmental effects of management practices used on pasture and rangelands. The pasture subcomponent is based around applying ecological principles to temperate humid grazing...
Planar Imaging of Hydroxyl in a High Temperature, High Pressure Combustion Facility
NASA Technical Reports Server (NTRS)
Hicks, Yolanda R.; Locke, Randy J.; Anderson, Robert C.; Ockunzzi, Kelly A.
1995-01-01
An optically accessible flame tube combustor is described which has high temperature, pressure, and air flow capabilities. The windows in the combustor measure 3.8 cm axially by 5.1 cm radially, providing 67 percent optical access to the square cross section flow chamber. The instrumentation allows one to examine combusting flows and combustor subcomponents, such as fuel injectors and air swirlers. These internal combustor subcomponents have previously been studied only with physical probes, such as temperature and species rakes. Planar laser-induced fluorescence (PLIF) images of OH have been obtained from this lean burning combustor burning Jet-A fuel. These images were obtained using various laser excitation lines of the OH A yields X (1,0) band for two fuel injector configurations with pressures ranging from 1013 kPa (10 atm) to 1419 kPa (14 atm), and equivalence ratios from 0.41 to 0. 59. Non-uniformities in the combusting flow, attributed to differences in fuel injector configuration, are revealed by these images.
Sun, Bo; Sun, Yong; Wang, Chengxin
2018-06-14
Nanoscale encoding denotes the creation of distinct electric and photonic properties within small, artificially defined regions by physical or chemical means. An encoded single nanostructure includes independent subcomponents as functional units that can also work as functional integrated nanosystems. These can be applied in high-resolution displays, detection systems, and even more complex devices. However, there is still no agreed-upon best platform satisfying all requirements. This paper demonstrates a competitive candidate based on defect engineering, that is, low energy focused e-beam-induced oxygen ion migration in a carbon-doped Al 2 O 3 nanowire. The electronic and photonic properties of these singular units are examined to be significantly modified. Their application in a nanoscale steganography strategy was also evaluated in detail. Complex patterns composed of points, lines, and planes were printed on a single nanowire using a focused e-beam and were subsequently erasable via a simple thermal process in air.
Recent Advances in the Genetics of Vocal Learning
Condro, Michael C.; White, Stephanie A.
2015-01-01
Language is a complex communicative behavior unique to humans, and its genetic basis is poorly understood. Genes associated with human speech and language disorders provide some insights, originating with the FOXP2 transcription factor, a mutation in which is the source of an inherited form of developmental verbal dyspraxia. Subsequently, targets of FOXP2 regulation have been associated with speech and language disorders, along with other genes. Here, we review these recent findings that implicate genetic factors in human speech. Due to the exclusivity of language to humans, no single animal model is sufficient to study the complete behavioral effects of these genes. Fortunately, some animals possess subcomponents of language. One such subcomponent is vocal learning, which though rare in the animal kingdom, is shared with songbirds. We therefore discuss how songbird studies have contributed to the current understanding of genetic factors that impact human speech, and support the continued use of this animal model for such studies in the future. PMID:26052371
A FORMATION SCENARIO OF YOUNG STELLAR GROUPS IN THE REGION OF THE SCORPIO CENTAURUS OB ASSOCIATION
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ortega, V. G.; Jilinski, E.; De la Reza, R.
2009-04-15
The main objective of this work is to investigate the role played by Lower Centaurus Crux (LCC) and Upper Centaurus Lupus (UCL), both subcomponents of the Scorpio Centaurus OB association (Sco-Cen), in the formation of the groups {beta} Pictoris, TW Hydrae, and the {eta} Chamaeleontis cluster. The dynamical evolution of all the stellar groups involved and of the bubbles and shells blown by LCC and UCL are calculated, and followed from the past to the present. This leads to a formation scenario in which (1) the groups {beta} Pictoris, TW Hydrae were formed in the wake of the shells createdmore » by LCC and UCL, (2) the young cluster {eta} Chamaeleontis was born as a consequence of the collision of the shells of LCC and UCL, and (3) the formation of Upper Scorpius (US), the other main subcomponent of the Sco-Cen association, may have been started by the same process that created {eta} Chamaeleontis.« less
Measuring Contextual Characteristics for Community Health
Hillemeier, Marianne M; Lynch, John; Harper, Sam; Casper, Michele
2003-01-01
Objective To conceptualize and measure community contextual influences on population health and health disparities. Data Sources We use traditional and nontraditional secondary sources of data comprising a comprehensive array of community characteristics. Study Design Using a consultative process, we identify 12 overarching dimensions of contextual characteristics that may affect community health, as well as specific subcomponents relating to each dimension. Data Collection An extensive geocoded library of data indicators relating to each dimension and subcomponent for metropolitan areas in the United States is assembled. Principal Findings We describe the development of community contextual health profiles, present the rationale supporting each of the profile dimensions, and provide examples of relevant data sources. Conclusions Our conceptual framework for community contextual characteristics, including a specified set of dimensions and components, can provide practical ways to monitor health-related aspects of the economic, social, and physical environments in which people live. We suggest several guiding principles useful for understanding how aspects of contextual characteristics can affect health and health disparities. PMID:14727793
Print-specific N170 involves multiple subcomponents for Japanese Hiragana.
Uno, Tomoki; Okumura, Yasuko; Kasai, Tetsuko
2017-05-22
Print-specific N170 in event-related potentials is generally considered to reflect relatively automatic processing for letter strings, which is crucial for fluent reading. However, our previous studies demonstrated that print-specific N170 for transparent Japanese Hiragana script consists of at least two subcomponents under rapid stimulus presentation: an attention-related left-lateralized N170 and a bilateral N170 associated with more automatic orthographic processes (Okumura, Kasai & Murohashi, 2014, 2015). The present study aimed to confirm the latter component by controlling presentation frequency of letters and nonlinguistic visual controls (i.e., symbols), but found a quite different pattern of results; an enhanced occipito-temporal positivity for words (80-120ms poststimulus) followed by the typical left-lateralized N170 and an enhanced parietal negativity for nonwords (150-200ms). These results should provide further insights into the interaction processes between attention and early stages of print processing. Copyright © 2017 Elsevier B.V. All rights reserved.
Energy Efficient Engine combustor test hardware detailed design report
NASA Technical Reports Server (NTRS)
Burrus, D. L.; Chahrour, C. A.; Foltz, H. L.; Sabla, P. E.; Seto, S. P.; Taylor, J. R.
1984-01-01
The Energy Efficient Engine (E3) Combustor Development effort was conducted as part of the overall NASA/GE E3 Program. This effort included the selection of an advanced double-annular combustion system design. The primary intent was to evolve a design which meets the stringent emissions and life goals of the E3 as well as all of the usual performance requirements of combustion systems for modern turbofan engines. Numerous detailed design studies were conducted to define the features of the combustion system design. Development test hardware was fabricated, and an extensive testing effort was undertaken to evaluate the combustion system subcomponents in order to verify and refine the design. Technology derived from this development effort will be incorporated into the engine combustion system hardware design. This advanced engine combustion system will then be evaluated in component testing to verify the design intent. What is evolving from this development effort is an advanced combustion system capable of satisfying all of the combustion system design objectives and requirements of the E3. Fuel nozzle, diffuser, starting, and emissions design studies are discussed.
Test results from large wing and fuselage panels
NASA Technical Reports Server (NTRS)
Madan, Ram C.; Voldman, Mike
1993-01-01
This paper presents the first results in an assessment of the strength, stiffness, and damage tolerance of stiffened wing and fuselage subcomponents. Under this NASA funded program, 10 large wing and fuselage panels, variously fabricated by automated tow placement and dry-stitched preform/resin transfer molding, are to be tested. The first test of an automated tow placement six-longeron fuselage panel under shear load was completed successfully. Using NASTRAN finite-element analysis the stiffness of the panel in the linear range prior to buckling was predicted within 3.5 percent. A nonlinear analysis predicted the buckling load within 10 percent and final failure load within 6 percent. The first test of a resin transfer molding six-stringer wing panel under compression was also completed. The panel failed unexpectedly in buckling because of inadequate supporting structure. The average strain was 0.43 percent with a line load of 20.3 kips per inch of width. This strain still exceeds the design allowable strains. Also, the stringers did not debond before failure, which is in contrast to the general behavior of unstitched panels.
Impact force as a scaling parameter
NASA Technical Reports Server (NTRS)
Poe, Clarence C., Jr.; Jackson, Wade C.
1994-01-01
The Federal Aviation Administration (FAR PART 25) requires that a structure carry ultimate load with nonvisible impact damage and carry 70 percent of limit flight loads with discrete damage. The Air Force has similar criteria (MIL-STD-1530A). Both civilian and military structures are designed by a building block approach. First, critical areas of the structure are determined, and potential failure modes are identified. Then, a series of representative specimens are tested that will fail in those modes. The series begins with tests of simple coupons, progresses through larger and more complex subcomponents, and ends with a test on a full-scale component, hence the term 'building block.' In order to minimize testing, analytical models are needed to scale impact damage and residual strength from the simple coupons to the full-scale component. Using experiments and analysis, the present paper illustrates that impact damage can be better understood and scaled using impact force than just kinetic energy. The plate parameters considered are size and thickness, boundary conditions, and material, and the impact parameters are mass, shape, and velocity.
2011-01-01
Background Overweight and obesity during pregnancy raise the risk of gestational diabetes and birth complications. Lifestyle factors like physical activity may decrease these risks through beneficial effects on glucose homeostasis. Here we examined physical activity patterns and their relationships with measures of glucose homeostasis in late pregnancy compared to non-pregnant women. Methods Normal weight and overweight women without diabetes (N = 108; aged 25-35 years) were studied; 35 were pregnant (in gestational weeks 28-32) and 73 were non-pregnant. Insulin sensitivity and β-cell response were estimated from an oral glucose tolerance test. Physical activity was measured during 10-days of free-living using a combined heart rate sensor and accelerometer. Total (TEE), resting (REE), and physical activity (PAEE) energy expenditure were measured using doubly-labeled water and expired gas indirect calorimetry. Results Total activity was associated with reduced first-phase insulin response in both pregnant (Regression r2 = 0.11; Spearman r = -0.47; p = 0.007) and non-pregnant women (Regression r2 = 0.11 Spearman; r = -0.36; p = 0.002). Relative to non-pregnant women, pregnant women were estimated to have secreted 67% more insulin and had 10% lower fasting glucose than non-pregnant women. Pregnant women spent 13% more time sedentary, 71% less time in moderate-to-vigorous intensity activity, had 44% lower objectively measured total activity, and 12% lower PAEE than non-pregnant women. Correlations did not differ significantly for any comparison between physical activity subcomponents and measures of insulin sensitivity or secretion. Conclusions Our findings suggest that physical activity conveys similar benefits on glucose homeostasis in pregnant and non-pregnant women, despite differences in subcomponents of physical activity. PMID:21679399
Diao, Kristen; Tripodis, Yorghos; Long, Webb E; Garg, Arvin
To evaluate whether socioeconomic (SES) and racial disparities in the parental perception and experience of having a medical home decreased from 2007 to 2011-2012. We used nationally representative samples of children aged 1 to 17 from the 2007 (n = 83,293) and 2011-2012 (n = 87,774) National Surveys of Children's Health. Multivariable logistic regression was used to test associations between SES (income, employment, and education) and race/ethnicity to the medical home and its subcomponents (personal doctor or nurse, usual source of care, family-centered care, referrals, care coordination), controlling for a priori identified covariates. From 2007 to 2011-2012, fewer children overall had access to a medical home (56.9% vs 54.0%, aOR = 0.91, 95% confidence interval 0.86-0.96). There were no significant changes in SES and racial trends in access to the medical home during this time period. For example, parents of children <100% federal poverty level (FPL) were significantly less likely to report having a medical home than parents of children ≥400% FPL in 2007 and 2011-2012; however, this disparity did not significantly change during the time period (aOR = 0.98, 95% confidence interval 0.75-1.27). There were also no significant changes in SES and racial/ethnic disparities over time for each medical home subcomponent. Despite widespread efforts to promote the medical home for all children, large SES and racial disparities in the parental perception and experience of having a medical home persisted from 2007 to 2011-2012. Copyright © 2016 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.
Updating Working Memory and Arithmetical Attainment in School
ERIC Educational Resources Information Center
Iuculano, Teresa; Moro, Raffaella; Butterworth, Brian
2011-01-01
Here we wished to determine how the sub-components of Working Memory (Phonological-Loop and Central Executive) influence children's arithmetical development. Specifically, we aimed at distinguishing between Working Memory inhibition and updating processes within the Central Executive, and the domain-specificity (words and numbers) of both…
School Violence: Social Bond Theory and Physical Fights
ERIC Educational Resources Information Center
Nemmetz, Amy J.
2010-01-01
Physical fighting in school is a concern for school administrators, juvenile justice professionals, and students. This quantitative study examined the involvement of physical fights at school among 5,674 adolescents across the United States via a casual comparative design with a correlational subcomponent. Differences were discovered between…
Benchmarking the performance of a land data assimilation system for agricultural drought monitoring
USDA-ARS?s Scientific Manuscript database
The application of land data assimilation systems to operational agricultural drought monitoring requires the development of (at least) three separate system sub-components: 1) a retrieval model to invert satellite-derived observations into soil moisture estimates, 2) a prognostic soil water balance...
The College Access Debate: Class Considerations and College Preparation
ERIC Educational Resources Information Center
Hodgman, Matthew R.
2013-01-01
The college access debate in America remains an important one. Affirmative action policies and practices continue to occupy a significant sub-component of the overall college access discussion. Recent legal debates and policy changes pertaining to affirmative action have encouraged analysis surrounding the overall viability and fairness of these…
Object-Location Memory: A Lesion-Behavior Mapping Study in Stroke Patients
ERIC Educational Resources Information Center
van Asselen, Marieke; Kessels, Roy P. C.; Frijns, Catharina J. M.; Kappelle, L. Jaap; Neggers, Sebastiaan F. W.; Postma, Albert
2009-01-01
Object-location memory is an important form of spatial memory, comprising different subcomponents that each process specific types of information within memory, i.e. remembering objects, remembering positions and binding these features in memory. In the current study we investigated the neural correlates of binding categorical (relative) or…
Analyzing the Impact of a Data Analysis Process to Improve Instruction Using a Collaborative Model
ERIC Educational Resources Information Center
Good, Rebecca B.
2006-01-01
The Data Collaborative Model (DCM) assembles assessment literacy, reflective practices, and professional development into a four-component process. The sub-components include assessing students, reflecting over data, professional dialogue, professional development for the teachers, interventions for students based on data results, and re-assessing…
Construct Validation of the Physics Metacognition Inventory
ERIC Educational Resources Information Center
Taasoobshirazi, Gita; Farley, John
2013-01-01
The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students'…
Kindergarten Impacts of a Preschool Language-Focused Intervention
ERIC Educational Resources Information Center
Johanson, Megan; Justice, Laura M.; Logan, Jessica
2016-01-01
Many preschool language-focused interventions attempt to boost language and literacy skills in young children at risk in these areas of development, though the long-term effects of such interventions are not well-established. This study investigated kindergarten language and reading skills, specifically the subcomponents of vocabulary, decoding,…
Kindergarten Impacts of a Preschool Language Focused-Intervention
ERIC Educational Resources Information Center
Johanson, Megan; Justice, Laura M.; Logan, Jessica
2016-01-01
Many preschool language-focused interventions attempt to boost language and literacy skills in young children at risk in these areas of development, though the long-term effects of such interventions are not well-established. This study investigated kindergarten language and reading skills, specifically the subcomponents of vocabulary, decoding,…
Reading Interest in a Digital Age
ERIC Educational Resources Information Center
Putro, Nur Hidayanto Pancoro Setyo; Lee, Jihyun
2017-01-01
The era of "digital literacy" raises the question of whether the meaning of reading interest may have changed. This study examined psycho-behavioral dimensions of reading interest as these relate to different reading modes and different purposes of reading. Findings show that reading interest is best represented by its subcomponents of…
Enhancing Automaticity through Task-Based Language Learning
ERIC Educational Resources Information Center
De Ridder, Isabelle; Vangehuchten, Lieve; Gomez, Marta Sesena
2007-01-01
In general terms automaticity could be defined as the subconscious condition wherein "we perform a complex series of tasks very quickly and efficiently, without having to think about the various components and subcomponents of action involved" (DeKeyser 2001: 125). For language learning, Segalowitz (2003) characterised automaticity as a…
Graduate Faculty Perceptions of Experiential Learning Activities in Multicultural Classrooms
ERIC Educational Resources Information Center
Su, Yu-Han
2012-01-01
Current graduate programs employ many effective teaching methods. One of these methods, using experiential learning activities (Lee & Caffarella, 1994) in class, includes the subcomponents of cooperative learning, self-directed learning, and active learning. While these methods are commonly used, not much scholarly literature has examined the…
Contingency power for small turboshaft engines using water injection into turbine cooling air
NASA Technical Reports Server (NTRS)
Biesiadny, Thomas J.; Klann, Gary A.; Clark, David A.; Berger, Brett
1987-01-01
Because of one engine inoperative requirements, together with hot-gas reingestion and hot day, high altitude takeoff situations, power augmentation for multiengine rotorcraft has always been of critical interest. However, power augmentation using overtemperature at the turbine inlet will shorten turbine life unless a method of limiting thermal and mechanical stresses is found. A possible solution involves allowing the turbine inlet temperature to rise to augment power while injecting water into the turbine cooling air to limit hot-section metal temperatures. An experimental water injection device was installed in an engine and successfully tested. Although concern for unprotected subcomponents in the engine hot section prevented demonstration of the technique's maximum potential, it was still possible to demonstrate increases in power while maintaining nearly constant turbine rotor blade temperature.
Executive functions deficit in mild cognitive impairment.
Traykov, Latchezar; Raoux, Nadine; Latour, Florence; Gallo, Livia; Hanon, Olivier; Baudic, Sophie; Bayle, Catherine; Wenisch, Emilie; Remy, Philippe; Rigaud, Anne-Sophie
2007-12-01
To investigate whether patients diagnosed with amnestic mild cognitive impairment (MCI) have also impairment in attention/executive functions, and therefore to clarify whether all subcomponents of executive control are equally affected in MCI. MCI refers to the transitional state between normal aging and dementia. Amnestic MCI is characterized by impaired episodic memory, although subtle impairment of executive functions has been noted on neuropsychologic tests. We investigated 20 MCI patients and 20 normal controls using episodic memory, attention/executive functions, language, and praxis tests. MCI patients had significantly lower scores on all measures of the Free and Cued Selective Reminding Test (P<0.05 to 0.01) than controls. Furthermore, MCI had a greater number of perseverations (P<0.01) on Modified Card Sorting Test and the lowest performance on the Stroop Test (P<0.02). Our findings showed impairment in episodic memory performance in MCI as compared with that of controls. In addition, MCI patients had problems with response inhibition, switching, and cognitive flexibility, which encompass various aspects of executive functions. This suggests that MCI may be identified by using a more detailed procedure for the assessment of cognitive decline than the evaluation of memory alone.
Clean catalytic combustor program
NASA Technical Reports Server (NTRS)
Ekstedt, E. E.; Lyon, T. F.; Sabla, P. E.; Dodds, W. J.
1983-01-01
A combustor program was conducted to evolve and to identify the technology needed for, and to establish the credibility of, using combustors with catalytic reactors in modern high-pressure-ratio aircraft turbine engines. Two selected catalytic combustor concepts were designed, fabricated, and evaluated. The combustors were sized for use in the NASA/General Electric Energy Efficient Engine (E3). One of the combustor designs was a basic parallel-staged double-annular combustor. The second design was also a parallel-staged combustor but employed reverse flow cannular catalytic reactors. Subcomponent tests of fuel injection systems and of catalytic reactors for use in the combustion system were also conducted. Very low-level pollutant emissions and excellent combustor performance were achieved. However, it was obvious from these tests that extensive development of fuel/air preparation systems and considerable advancement in the steady-state operating temperature capability of catalytic reactor materials will be required prior to the consideration of catalytic combustion systems for use in high-pressure-ratio aircraft turbine engines.
TCOPPE school environmental audit tool: assessing safety and walkability of school environments.
Lee, Chanam; Kim, Hyung Jin; Dowdy, Diane M; Hoelscher, Deanna M; Ory, Marcia G
2013-09-01
Several environmental audit instruments have been developed for assessing streets, parks and trails, but none for schools. This paper introduces a school audit tool that includes 3 subcomponents: 1) street audit, 2) school site audit, and 3) map audit. It presents the conceptual basis and the development process of this instrument, and the methods and results of the reliability assessments. Reliability tests were conducted by 2 trained auditors on 12 study schools (high-low income and urban-suburban-rural settings). Kappa statistics (categorical, factual items) and ICC (Likert-scale, perceptual items) were used to assess a) interrater, b) test-retest, and c) peak vs. off-peak hour reliability tests. For the interrater reliability test, the average Kappa was 0.839 and the ICC was 0.602. For the test-retest reliability, the average Kappa was 0.903 and the ICC was 0.774. The peak-off peak reliability was 0.801. Rural schools showed the most consistent results in the peak-off peak and test-retest assessments. For interrater tests, urban schools showed the highest ICC, and rural schools showed the highest Kappa. Most items achieved moderate to high levels of reliabilities in all study schools. With proper training, this audit can be used to assess school environments reliably for research, outreach, and policy-support purposes.
An overview of the NASA textile composites program
NASA Technical Reports Server (NTRS)
Dexter, H. Benson
1993-01-01
The NASA Langley Research Center is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structures. In addition to in-house research, the program includes major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house research is focused on science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of innovative design concepts, cost-effective fabrication, and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3-D weaving, 2-D and 3-D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials. The goals of the NASA Langley-sponsored research program are to demonstrate technology readiness with subscale composite components by 1995 and to verify the performance of full-scale composite primary aircraft structural components by 1997. The status of textile reinforced composite structural elements under development by Boeing, Douglas, Lockheed, and Grumman are presented. Included are braided frames and woven/stitched wing and fuselage panels.
Multi-peak structure of generation spectrum of random distributed feedback fiber Raman lasers.
Vatnik, I D; Zlobina, E A; Kablukov, S I; Babin, S A
2017-02-06
We study spectral features of the generation of random distributed feedback fiber Raman laser arising from two-peak shape of the Raman gain spectral profile realized in the germanosilicate fibers. We demonstrate that number of peaks can be calculated using power balance model considering different subcomponents within each Stokes component.
75 FR 1356 - RC2 Corporation, Provisional Acceptance of a Settlement Agreement and Order
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-11
... primarily at toy stores and various retailers nationwide, and secondarily through RC2's e-commerce websites... various retailers nationwide, and secondarily through RC2's e-commerce Web sites or as `sub-components' of...(e). Published below is a provisionally-accepted Settlement Agreement with RC2 Corporation...
ERIC Educational Resources Information Center
Sahin, Ömer; Gökkurt, Burçin; Soylu, Yasin
2016-01-01
The aim of the study is to examine prospective mathematics teachers' pedagogical content knowledge in terms of knowledge of understanding students and knowledge of instructional strategies which are the subcomponents of pedagogical content knowledge. The participants of this research consist of 98 prospective teachers who are studying in two…
Neural Correlates of Oral Word Reading, Silent Reading Comprehension, and Cognitive Subcomponents
ERIC Educational Resources Information Center
Xia, Zhichao; Zhang, Linjun; Hoeft, Fumiko; Gu, Bin; Gong, Gaolang; Shu, Hua
2018-01-01
The ability to read is essential for cognitive development. To deepen our understanding of reading acquisition, we explored the neuroanatomical correlates (cortical thickness; CT) of word-reading fluency and sentence comprehension efficiency in Chinese with a group of typically developing children (N = 21; 12 females and 9 males; age range…
Model and Subcomponent Development for a Pulse-Combustor-Driven Microgenerator
2004-08-31
sputtering of thin magnetic and dielectric layers [4]; and mechanical lamination of polymer -coated NiFe foils [5]. Although these approaches have...photomicrograph of the fabricated device is given in Figure 4.2-6. 3d solenoid- like Cu coil EPOXY SU8 NIFE LAMINATE D CORE Figure 4.2-6 Photomicrograph
ERIC Educational Resources Information Center
Cosper, Sharon M.; Lee, Gregory P.; Peters, Susan Beth; Bishop, Elizabeth
2009-01-01
The objective of this study was to examine the efficacy of Interactive Metronome (Interactive Metronome, Sunrise, Florida, USA) training in a group of children with mixed attentional and motor coordination disorders to further explore which subcomponents of attentional control and motor functioning the training influences. Twelve children who had…
The developmental dynamics of gait maturation with a focus on spatiotemporal measures.
Kraan, C M; Tan, A H J; Cornish, K M
2017-01-01
Gait analysis is recognised as a powerful clinical tool for studying relationships between motor control and brain function. By drawing on the literature investigating gait in individuals with neurological disorders, this review provides insight into the neural processes that contribute to and regulate specific spatiotemporal sub-components of gait and how they may mature across early to late childhood. This review also discusses the roles of changing anthropomorphic characteristics, and maturing sensory and higher-order cognitive processes in differentiating the developmental trajectories of the sub-components of gait. Importantly, although studies have shown that cognitive-gait interference is larger in children compared to adults, the contributing neurocognitive mechanisms may vary across age groups who have different types of attentional or cognitive vulnerabilities. These findings have implications for current models of gait maturation by highlighting the need for a dynamic model that focuses on the integration of various factors that contribute to gait though experience and practice. This is essential to elucidating why gait and other motor deficits are often contiguous with cognitive neurodevelopmental disorders. Copyright © 2016. Published by Elsevier B.V.
A Multiple-star Combined Solution Program - Application to the Population II Binary μ Cas
NASA Astrophysics Data System (ADS)
Gudehus, D. H.
2001-05-01
A multiple-star combined-solution computer program which can simultaneously fit astrometric, speckle, and spectroscopic data, and solve for the orbital parameters, parallax, proper motion, and masses has been written and is now publicly available. Some features of the program are the ability to scale the weights at run time, hold selected parameters constant, handle up to five spectroscopic subcomponents for the primary and the secondary each, account for the light travel time across the system, account for apsidal motion, plot the results, and write the residuals in position to a standard file for further analysis. The spectroscopic subcomponent data can be represented by reflex velocities and/or by independent measurements. A companion editing program which can manage the data files is included in the package. The program has been applied to the Population II binary μ Cas to derive improved masses and an estimate of the primordial helium abundance. The source code, executables, sample data files, and documentation for OpenVMS and Unix, including Linux, are available at http://www.chara.gsu.edu/\\rlap\\ \\ gudehus/binary.html.
Ability-versus skill-based assessment of emotional intelligence.
Bradberry, Travis R; Su, Lac D
2006-01-01
Emotional intelligence has received an intense amount of attention in leadership circles during the last decade and continuing debate exists concerning the best method for measuring this construct. This study analyzed leader emotional intelligence scores, measured via skill and ability methodologies, against leader job performance. Two hundred twelve employees from three organizations participated in this study. Scores on the Emotional Intelligence Appraisal, a skill-based assessment, were positively, though not significantly, correlated with scores on the MSCEIT, an ability-based assessment of emotional intelligence. Scores on the MSCEIT did not have a significant relationship with job performance in this study, whereas, scores on the Emotional Intelligence Appraisal had a strong link to leader job performance. The four subcomponents of the Emotional Intelligence Appraisal were examined against job performance. Relationship management was a stronger predictor of leader job performance than the other three subcomponents. Social awareness was the single emotional intelligence skill that did not have a significant link to leader job performance. Factor analyses yielded a two-component model of emotional intelligence encompassing personal and social competence, rather than confirmation of a four-part taxonomy.
Integrated systems analysis reveals a molecular network underlying autism spectrum disorders
Li, Jingjing; Shi, Minyi; Ma, Zhihai; Zhao, Shuchun; Euskirchen, Ghia; Ziskin, Jennifer; Urban, Alexander; Hallmayer, Joachim; Snyder, Michael
2014-01-01
Autism is a complex disease whose etiology remains elusive. We integrated previously and newly generated data and developed a systems framework involving the interactome, gene expression and genome sequencing to identify a protein interaction module with members strongly enriched for autism candidate genes. Sequencing of 25 patients confirmed the involvement of this module in autism, which was subsequently validated using an independent cohort of over 500 patients. Expression of this module was dichotomized with a ubiquitously expressed subcomponent and another subcomponent preferentially expressed in the corpus callosum, which was significantly affected by our identified mutations in the network center. RNA-sequencing of the corpus callosum from patients with autism exhibited extensive gene mis-expression in this module, and our immunochemical analysis showed that the human corpus callosum is predominantly populated by oligodendrocyte cells. Analysis of functional genomic data further revealed a significant involvement of this module in the development of oligodendrocyte cells in mouse brain. Our analysis delineates a natural network involved in autism, helps uncover novel candidate genes for this disease and improves our understanding of its molecular pathology. PMID:25549968
Communication: Nanoscale structure of tetradecyltrihexylphosphonium based ionic liquids
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hettige, Jeevapani J.; Araque, Juan C.; Margulis, Claudio J., E-mail: claudio-margulis@uiowa.edu
In a recent communication [J. J. Hettige et al., J. Chem. Phys. 140, 111102 (2014)], we investigated the anomalous temperature dependence of the X-ray first sharp diffraction peak (or prepeak) in the tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)-amide ionic liquid. Contrary to what was expected and often observed, the first sharp diffraction peak in this system was shown to increase in intensity with increasing temperature. This implies higher intermediate-range periodicity at a higher temperature. Is this counter-intuitive behavior specific to the combination of cation and anion? The current work analyzes the structural behavior of the same cation coupled with six different anions ranging frommore » the small and spherically symmetric Cl{sup −} to the more structurally complex and charge-diffuse NTf{sub 2}{sup −}. In all cases, the same temperature behavior trend for the prepeak is observed independent of anionic nature. We will show that the intensity increase in the prepeak region is associated with the structural behavior of charged liquid subcomponents. Instead, upon a temperature increase, the apolar subcomponents contribute to what would be an expected decrease of prepeak intensity.« less
Collaborative Planning of Robotic Exploration
NASA Technical Reports Server (NTRS)
Norris, Jeffrey; Backes, Paul; Powell, Mark; Vona, Marsette; Steinke, Robert
2004-01-01
The Science Activity Planner (SAP) software system includes an uplink-planning component, which enables collaborative planning of activities to be undertaken by an exploratory robot on a remote planet or on Earth. Included in the uplink-planning component is the SAP-Uplink Browser, which enables users to load multiple spacecraft activity plans into a single window, compare them, and merge them. The uplink-planning component includes a subcomponent that implements the Rover Markup Language Activity Planning format (RML-AP), based on the Extensible Markup Language (XML) format that enables the representation, within a single document, of planned spacecraft and robotic activities together with the scientific reasons for the activities. Each such document is highly parseable and can be validated easily. Another subcomponent of the uplink-planning component is the Activity Dictionary Markup Language (ADML), which eliminates the need for two mission activity dictionaries - one in a human-readable format and one in a machine-readable format. Style sheets that have been developed along with the ADML format enable users to edit one dictionary in a user-friendly environment without compromising
Zoccolotti, Pierluigi; De Luca, Maria; Marinelli, Chiara V.; Spinelli, Donatella
2014-01-01
This study was aimed at predicting individual differences in text reading fluency. The basic proposal included two factors, i.e., the ability to decode letter strings (measured by discrete pseudo-word reading) and integration of the various sub-components involved in reading (measured by Rapid Automatized Naming, RAN). Subsequently, a third factor was added to the model, i.e., naming of discrete digits. In order to use homogeneous measures, all contributing variables considered the entire processing of the item, including pronunciation time. The model, which was based on commonality analysis, was applied to data from a group of 43 typically developing readers (11- to 13-year-olds) and a group of 25 chronologically matched dyslexic children. In typically developing readers, both orthographic decoding and integration of reading sub-components contributed significantly to the overall prediction of text reading fluency. The model prediction was higher (from ca. 37 to 52% of the explained variance) when we included the naming of discrete digits variable, which had a suppressive effect on pseudo-word reading. In the dyslexic readers, the variance explained by the two-factor model was high (69%) and did not change when the third factor was added. The lack of a suppression effect was likely due to the prominent individual differences in poor orthographic decoding of the dyslexic children. Analyses on data from both groups of children were replicated by using patches of colors as stimuli (both in the RAN task and in the discrete naming task) obtaining similar results. We conclude that it is possible to predict much of the variance in text-reading fluency using basic processes, such as orthographic decoding and integration of reading sub-components, even without taking into consideration higher-order linguistic factors such as lexical, semantic and contextual abilities. The approach validity of using proximal vs. distal causes to predict reading fluency is discussed. PMID:25477856
Six-Tube Freezable Radiator Testing and Model Correlation
NASA Technical Reports Server (NTRS)
Lillibridge, Sean; Navarro, Moses
2011-01-01
Freezable radiators offer an attractive solution to the issue of thermal control system scalability. As thermal environments change, a freezable radiator will effectively scale the total heat rejection it is capable of as a function of the thermal environment and flow rate through the radiator. Scalable thermal control systems are a critical technology for spacecraft that will endure missions with widely varying thermal requirements. These changing requirements are a result of the spacecraft s surroundings and because of different thermal loads rejected during different mission phases. However, freezing and thawing (recovering) a freezable radiator is a process that has historically proven very difficult to predict through modeling, resulting in highly inaccurate predictions of recovery time. These predictions are a critical step in gaining the capability to quickly design and produce optimized freezable radiators for a range of mission requirements. This paper builds upon previous efforts made to correlate a Thermal Desktop(TradeMark) model with empirical testing data from two test articles, with additional model modifications and empirical data from a sub-component radiator for a full scale design. Two working fluids were tested, namely MultiTherm WB-58 and a 50-50 mixture of DI water and Amsoil ANT.
Six-Tube Freezable Radiator Testing and Model Correlation
NASA Technical Reports Server (NTRS)
Lilibridge, Sean T.; Navarro, Moses
2012-01-01
Freezable Radiators offer an attractive solution to the issue of thermal control system scalability. As thermal environments change, a freezable radiator will effectively scale the total heat rejection it is capable of as a function of the thermal environment and flow rate through the radiator. Scalable thermal control systems are a critical technology for spacecraft that will endure missions with widely varying thermal requirements. These changing requirements are a result of the spacecraft?s surroundings and because of different thermal loads rejected during different mission phases. However, freezing and thawing (recov ering) a freezable radiator is a process that has historically proven very difficult to predict through modeling, resulting in highly inaccurate predictions of recovery time. These predictions are a critical step in gaining the capability to quickly design and produce optimized freezable radiators for a range of mission requirements. This paper builds upon previous efforts made to correlate a Thermal Desktop(TM) model with empirical testing data from two test articles, with additional model modifications and empirical data from a sub-component radiator for a full scale design. Two working fluids were tested: MultiTherm WB-58 and a 50-50 mixture of DI water and Amsoil ANT.
NASA Technical Reports Server (NTRS)
Miller, Sandi G.; Roberts, Gary D.; Kohlman, Lee W.; Heimann, Paula J.; Pereira, J. Michael; Ruggeri, Charles R.; Martin, Richard E.; McCorkle, Linda S.
2015-01-01
Impact damage tolerance and damage resistance is a critical metric for application of polymer matrix composites where failure caused by impact damage could compromise structural performance and safety. As a result, several materials and/or design approaches to improve impact damage tolerance have been investigated over the past several decades. Many composite toughening methodologies impart a trade-off between increased fracture toughness and compromised in-plane strength and modulus. In large part, mechanical tests to evaluate composite damage tolerance include static methods such as Mode I, Mode II, and mixed mode failures. However, ballistic impact damage resistance does not always correlate with static properties. The intent of this paper is to evaluate the influence of a thermoplastic polyurethane veil interleave on the static and dynamic performance of composite test articles. Static coupon tests included tension, compression, double cantilever beam, and end notch flexure. Measurement of the resistance to ballistic impact damage were made to evaluate the composites response to high speed impact. The interlayer material showed a decrease of in-plane performance with only a moderate improvement to Mode I and Mode II fracture toughness. However, significant benefit to impact damage tolerance was observed through ballistic tests.
NASA Technical Reports Server (NTRS)
Sengupta, Anita
2005-01-01
Destructive physical analysis of the discharge and neutralizer hollow cathode assemblies from the Deep Space 1 Flight Spare 30,000 Hr life test was performed to characterize physical and chemical evidence of operationally induced effects after 30,372 hours of operation with beam extraction. Post-test inspection of the discharge-cathode assembly was subdivided into detailed analyses at the subcomponent level. Detailed materials analysis and optical inspection of the insert, orifice plate, cathode tube, heater, keeper assembly, insulator, and low-voltage propellant isolator were performed. Energy dispersive X-ray (EDX) and scanning electron microscopy (SEW analyses were used to determine the extent and composition of regions of net deposition and erosion of both the discharge and neutralizer inserts. A comparative approach with an un-operated 4:1:1 insert was used to determine the extent of impregnate material depletion as a function of depth from the ID surface and axial position from the orifice plate. Analysis results are compared and contrasted with those obtained from similar analyses on components from shorter term tests, and provide insight regarding the prospect for successful longer-term operation consistent with SOA ion engine program life objectives at NASA.
Noble, Jake W.; Hunter, Diana V.; Roskelley, Calvin D.; Chan, Edward K. L.; Mills, Julia
2016-01-01
“Rods and rings” (RR) and loukoumasomes are similarly shaped, subcellular macromolecular structures with as yet unknown function. RR, so named because of their shape, are formed in response to inhibition in the GTP or CTP synthetic pathways and are highly enriched in the two key enzymes of the nucleotide synthetic pathway. Loukoumasomes also occur as linear and toroidal bodies and were initially inferred to be the same as RR, largely due to their shared shape and size and the fact that it was unclear if they shared the same subcomponents. In human retinoblastoma tissue and cells we have observed toroidal, perinuclear, macromolecular structures of similar size and antigenicity to those previously reported in neurons (neuronal-loukoumasomes). To further characterize the subcomponents of the retinal-loukoumasomes, confocal analysis following immunocytochemical staining for alpha-tubulin, beta-III tubulin and detyrosinated tubulin was performed. These studies indicate that retinal-loukoumasomes are enriched for beta-III tubulin and other tubulins associated with microtubules. Immunofluorescence together with the in situ proximity ligation assay (PLA), confirmed that beta-III tubulin colocalized with detyrosinated tubulin within loukoumasomes. Our results indicate that these tissues contain only loukoumasomes because these macromolecular structures are immunoreactive with an anti-tubulin antibody but are not recognized by the prototype anti-RR/inosine monophosphate dehydrogenase (IMPDH) antibody (It2006). To further compare the RR and retinal-loukoumasomes, retinoblastoma cells were exposed to the IMPDH-inhibitor ribavirin, a drug known to induce the formation of RR. In contrast to RR, the production of retinal-loukoumasomes was unaffected. Coimmunostaining of Y79 cells for beta-III tubulin and IMPDH indicate that these cells, when treated with ribavirin, can contain both retinal-loukoumasomes and RR and that these structures are antigenically distinct. Subcellular fractionation studies indicate that ribavirin increased the RR subcomponent, IMPDH, in the nuclear fraction of Y79 cells from 21.3 ± 5.8% (0 mM ribavirin) to 122.8 ± 7.9% (1 mM ribavirin) while the subcellular localization of the retinal-loukoumasome subcomponent tubulin went unaltered. Further characterization of retinal-loukoumasomes in retinoblastoma cells reveals that they are intimately associated with lamin folds within the nuclear envelope. Using immunofluorescence and the in situ PLA in this cell type, we have observed colocalization of beta-III tubulin with MAP2. As MAP2 is a microtubule-associated protein implicated in microtubule crosslinking, this supports a role for microtubule crosslinkers in the formation of retinal-loukoumasomes. Together, these results suggest that loukoumasomes and RR are distinct subcellular macromolecular structures, formed by different cellular processes and that there are other loukoumasome-like structures within retinal tissues and cells. PMID:27798680
Noble, Jake W; Hunter, Diana V; Roskelley, Calvin D; Chan, Edward K L; Mills, Julia
2016-01-01
"Rods and rings" (RR) and loukoumasomes are similarly shaped, subcellular macromolecular structures with as yet unknown function. RR, so named because of their shape, are formed in response to inhibition in the GTP or CTP synthetic pathways and are highly enriched in the two key enzymes of the nucleotide synthetic pathway. Loukoumasomes also occur as linear and toroidal bodies and were initially inferred to be the same as RR, largely due to their shared shape and size and the fact that it was unclear if they shared the same subcomponents. In human retinoblastoma tissue and cells we have observed toroidal, perinuclear, macromolecular structures of similar size and antigenicity to those previously reported in neurons (neuronal-loukoumasomes). To further characterize the subcomponents of the retinal-loukoumasomes, confocal analysis following immunocytochemical staining for alpha-tubulin, beta-III tubulin and detyrosinated tubulin was performed. These studies indicate that retinal-loukoumasomes are enriched for beta-III tubulin and other tubulins associated with microtubules. Immunofluorescence together with the in situ proximity ligation assay (PLA), confirmed that beta-III tubulin colocalized with detyrosinated tubulin within loukoumasomes. Our results indicate that these tissues contain only loukoumasomes because these macromolecular structures are immunoreactive with an anti-tubulin antibody but are not recognized by the prototype anti-RR/inosine monophosphate dehydrogenase (IMPDH) antibody (It2006). To further compare the RR and retinal-loukoumasomes, retinoblastoma cells were exposed to the IMPDH-inhibitor ribavirin, a drug known to induce the formation of RR. In contrast to RR, the production of retinal-loukoumasomes was unaffected. Coimmunostaining of Y79 cells for beta-III tubulin and IMPDH indicate that these cells, when treated with ribavirin, can contain both retinal-loukoumasomes and RR and that these structures are antigenically distinct. Subcellular fractionation studies indicate that ribavirin increased the RR subcomponent, IMPDH, in the nuclear fraction of Y79 cells from 21.3 ± 5.8% (0 mM ribavirin) to 122.8 ± 7.9% (1 mM ribavirin) while the subcellular localization of the retinal-loukoumasome subcomponent tubulin went unaltered. Further characterization of retinal-loukoumasomes in retinoblastoma cells reveals that they are intimately associated with lamin folds within the nuclear envelope. Using immunofluorescence and the in situ PLA in this cell type, we have observed colocalization of beta-III tubulin with MAP2. As MAP2 is a microtubule-associated protein implicated in microtubule crosslinking, this supports a role for microtubule crosslinkers in the formation of retinal-loukoumasomes. Together, these results suggest that loukoumasomes and RR are distinct subcellular macromolecular structures, formed by different cellular processes and that there are other loukoumasome-like structures within retinal tissues and cells.
A perspective on future directions in aerospace propulsion system simulation
NASA Technical Reports Server (NTRS)
Miller, Brent A.; Szuch, John R.; Gaugler, Raymond E.; Wood, Jerry R.
1989-01-01
The design and development of aircraft engines is a lengthy and costly process using today's methodology. This is due, in large measure, to the fact that present methods rely heavily on experimental testing to verify the operability, performance, and structural integrity of components and systems. The potential exists for achieving significant speedups in the propulsion development process through increased use of computational techniques for simulation, analysis, and optimization. This paper outlines the concept and technology requirements for a Numerical Propulsion Simulation System (NPSS) that would provide capabilities to do interactive, multidisciplinary simulations of complete propulsion systems. By combining high performance computing hardware and software with state-of-the-art propulsion system models, the NPSS will permit the rapid calculation, assessment, and optimization of subcomponent, component, and system performance, durability, reliability and weight-before committing to building hardware.
In Search of the Physics: The Interplay of Experiment and Computation in Slat Aeroacoustics
NASA Technical Reports Server (NTRS)
Khorrami, Mehdi R.; Choudhari, Meelan; Singer, Bart A.; Lockard, David P.; Streett, Craig L.
2003-01-01
The synergistic use of experiments and numerical simulations can uncover the underlying physics of airframe noise sources. We focus on the high-lift noise component associated with a leading-edge slat; flap side-edge noise is discussed in a companion paper by Streett et al. (2003). The present paper provides an overview of how slat noise was split into subcomponents and analyzed with carefully planned complementary experimental and numerical tests. We consider both tonal and broadband aspects of slat noise. The predicted far-field noise spectra are shown to be in good qualitative (and, to lesser extent, good quantitative agreement) with acoustic array measurements. Although some questions remain unanswered, the success of current airframe noise studies provides ample promise that remaining technical issues can be successfully addressed in the near future.
Li, Shanzhi; Wang, Haoping; Tian, Yang; Aitouch, Abdel; Klein, John
2016-09-01
This paper presents an intelligent proportional-integral sliding mode control (iPISMC) for direct power control of variable speed-constant frequency wind turbine system. This approach deals with optimal power production (in the maximum power point tracking sense) under several disturbance factors such as turbulent wind. This controller is made of two sub-components: (i) an intelligent proportional-integral module for online disturbance compensation and (ii) a sliding mode module for circumventing disturbance estimation errors. This iPISMC method has been tested on FAST/Simulink platform of a 5MW wind turbine system. The obtained results demonstrate that the proposed iPISMC method outperforms the classical PI and intelligent proportional-integral control (iPI) in terms of both active power and response time. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.
Gigapan Voyage for Robotic Recon
NASA Technical Reports Server (NTRS)
Lee, Susan Y.; Moorse, Theodore Fitzgerald; Park, Eric J.
2010-01-01
Gigapan Voyage (GV) is a self-contained remotely-operable Gigapan capturing system that is currently being developed by the Intelligent Robotics Group (IRG) at NASA Ames Research Center. Gigapan Voyage was primarily designed to be integrated onto Johnson Space Center s Lunar Electric Rovers (LER). While on LER, Gigapan Voyage was used by scientists and astronauts during the 2009 and 2010 Desert RATS field tests. The concept behind Gigapan Voyage is to merge all the sub-components of the commercial GigaPan system into an all-in-one system that can capture, stitch, and display Gigapans in an automated way via a simple web interface. The GV system enables NASA to quickly and easily add remote-controlled Gigapan capturing capability onto rovers with minimal integration effort. Key Words: Geology, NASA, Black Point Lava Flow, Robot, K10, LER, Gigapan Voyage, Desert RATS, Intelligent Robotics Group
Contingency power for a small turboshaft engine by using water injection into turbine cooling air
NASA Technical Reports Server (NTRS)
Biesiadny, Thomas J.; Klann, Gary A.
1992-01-01
Because of one-engine-inoperative (OEI) requirements, together with hot-gas reingestion and hot-day, high-altitude take-off situations, power augmentation for multiengine rotorcraft has always been of critical interest. However, power augmentation by using overtemperature at the turbine inlet will shorten turbine life unless a method of limiting thermal and mechanical stress is found. A possible solution involves allowing the turbine inlet temperature to rise to augment power while injecting water into the turbine cooling air to limit hot-section metal temperatures. An experimental water injection device was installed in an engine and successfully tested. Although concern for unprotected subcomponents in the engine hot section prevented demonstration of the technique's maximum potential, it was still possible to demonstrate increases in power while maintaining nearly constant turbine rotor blade temperature.
ERIC Educational Resources Information Center
Schlosser, Ralf G. M.; Koch, Kathrin; Wagner, Gerd; Nenadic, Igor; Roebel, Martin; Schachtzabel, Claudia; Axer, Martina; Schultz, Christoph; Reichenbach, Jurgen R.; Sauer, Heinrich
2008-01-01
Working memory deficits are a core feature of schizophrenia. Previous working memory studies suggest a load dependent storage deficit. However, explicit studies of higher executive working memory processes are limited. Moreover, few studies have examined whether subcomponents of working memory such as encoding and maintenance of information are…
ERIC Educational Resources Information Center
Zmyj, Norbert; Bischof-Köhler, Doris
2015-01-01
What is the developmental course of children's gender constancy? Do other cognitive abilities such as time comprehension and false-belief understanding foster gender constancy and the subcomponents gender stability and gender consistency? We examined the development of gender constancy and its relation to time comprehension and false-belief…
The Influence of Auditory Short-Term Memory on Behavior Problem Development
ERIC Educational Resources Information Center
Low, Justin; Keith, Timothy
2015-01-01
The purpose of this research was to determine the influence of two subcomponents of auditory short-term memory on the developmental trajectories of behavior problems. The sample included 7,058 children from the NLSY79--Children and Young Adult survey between the ages 5 and 14 years. Results suggested that anxious/depressed behavior increases…
Verbal Short-term Memory in Down's Syndrome: An Articulatory Loop Deficit?
ERIC Educational Resources Information Center
Vicari, S.; Marotta, L.; Carlesimo, G. A.
2004-01-01
Verbal short-term memory, as measured by digit or word span, is generally impaired in individuals with Down's syndrome (DS) compared to mental age-matched controls. Moving from the working memory model, the present authors investigated the hypothesis that impairment in some of the articulatory loop sub-components is at the base of the deficient…
40 CFR 1065.550 - Gas analyzer range validation and drift validation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... a dry sample measured with a CLD and the removed water is corrected based on measured CO2, CO, THC... may not validate the concentration subcomponents (e.g., THC and CH4 for NMHC) separately. For example, for NMHC measurements, perform drift validation on NMHC; do not validate THC and CH4 separately. (2...
40 CFR 1065.550 - Gas analyzer range verification and drift verification.
Code of Federal Regulations, 2014 CFR
2014-07-01
... with a CLD and the removed water is corrected based on measured CO2, CO, THC, and NOX concentrations... concentration subcomponents (e.g., THC and CH4 for NMHC) separately. For example, for NMHC measurements, perform drift verification on NMHC; do not verify THC and CH4 separately. (2) Drift verification requires two...
40 CFR 1065.550 - Gas analyzer range validation and drift validation.
Code of Federal Regulations, 2013 CFR
2013-07-01
... a dry sample measured with a CLD and the removed water is corrected based on measured CO2, CO, THC... may not validate the concentration subcomponents (e.g., THC and CH4 for NMHC) separately. For example, for NMHC measurements, perform drift validation on NMHC; do not validate THC and CH4 separately. (2...
Li, Xuezhao; Wu, Jinguo; He, Cheng; Zhang, Rong; Duan, Chunying
2016-04-14
By incorporating a fac-tris(4-(2-pyridinyl)phenylamine)iridium as the backbone of the tripodal ligand to constrain the coordination geometry of Zn(II) ions, a pentanuclear Ir-Zn heterometal-organic luminescent polyhedron was obtained via a subcomponent self-assembly for carbon dioxide fixation and sulfite sequestration.
ERIC Educational Resources Information Center
Nassaji, Hossein
2014-01-01
This article examines current research on the role and importance of lower-level processes in second language (L2) reading. The focus is on word recognition and its subcomponent processes, including various phonological and orthographic processes. Issues related to syntactic and semantic processes and their relationship with word recognition are…
Relationships between Self-Esteem and Smoking Experimentation in Childhood
ERIC Educational Resources Information Center
Barlow, Alexandra; Woods, Susan E.
2009-01-01
There have been mixed results concerning any association between self-esteem and smoking prevalence in young people. The aim of this paper was to investigate cross-sectional and longitudinal relationships between self-esteem and the uptake of smoking in childhood, and how various sub-components of self-esteem are related to smoking. A sample of…
Onboard Stability Control System for a Flapping Wing Nano Air Vehicle
2009-04-24
15 Figure 14. Vehicle response to hover command with nitinol actuators and sensors...with nitinol actuators and sensors modeled. An extended Kalman filter has been implemented to estimate the functional roll rate from sensor...Actuators The wing control actuators subcomponent consists of nitinol wires connected to mechanisms that dictate the wing kinematics. These mechanisms
ERIC Educational Resources Information Center
Ross, Thomas
2008-01-01
During the last decade, theory and research on human self-regulation has made significant progress. While self-regulation may be understood as a generic term comprising a range of different cognitive, emotional, and behavioral processes, most research pertains to a subcomponent of self-regulation, namely emotional self-regulation, or emotional…
The Specificity of Inhibitory Impairments in Autism and Their Relation to ADHD-Type Symptoms
ERIC Educational Resources Information Center
Sanderson, Charlotte; Allen, Melissa L.
2013-01-01
Findings on inhibitory control in autism have been inconsistent. This is perhaps a reflection of the different tasks that have been used. Children with autism (CWA) and typically developing controls, matched for verbal and non-verbal mental age, completed three tasks of inhibition, each representing different inhibitory subcomponents: Go/No-Go…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-30
... Northeast (NE) multispecies vessels fishing under common pool regulations for the 2010 fishing year (FY... of harvest exceeding the subcomponent of the annual catch limit (ACL) allocated to the common pool (common pool sub-ACL) for each of these stocks during FY 2010 (May 1, 2010, through April 30, 2011). This...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-27
... for Northeast (NE) multispecies vessels fishing under common pool regulations for the 2010 fishing... likelihood of harvest exceeding the subcomponent of the annual catch limit (ACL) allocated to the common pool (common pool sub-ACL) for each of these five stocks during FY 2010 (May 1, 2010, through April 30, 2011...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-02
...; Modification of the Common Pool Day-at-Sea Accounting and Possession Prohibition for Witch Flounder AGENCY... fishing under common pool regulations for the 2010 fishing year (FY) when fishing in the Inshore Gulf of... exceed the subcomponent of the annual catch limit (ACL) allocated to the common pool during FY 2010 (May...
Perceptual Units Training for Improving Word Analysis Skills. Technical Report No. 1.
ERIC Educational Resources Information Center
Weaver, Phyllis A.; And Others
A training program was devised to develop automaticity of one subcomponent of reading--locating and disembedding multiletter units within words. The system involved the use of a training task that was implemented in a microcomputer-based game that required students to detect whether a target unit was presented within words that were shown in rapid…
ERIC Educational Resources Information Center
Jung, Jisun; Shin, Jung Cheol
2015-01-01
The purpose of this study is to explore the impact of administrative staff's job competency on their job satisfaction in a Korean research university. We conceptualized job satisfaction into three subcomponents: satisfaction in the job field, in the workplace, and with the actual task. In the regression analysis, we included demographics, inner…
ERIC Educational Resources Information Center
Oh, HunSeok; Seo, DongIn; Kim, JuSeuk; Yoo, SangOk; Seong, HeeChang
2015-01-01
This study assessed and evaluated the competitiveness of national human resource development (NHRD) systems in emerging countries with potential for growth. The literature on emerging countries and NHRD systems was reviewed. The study developed a model mechanism with forty-one indices and nine sub-components for the NHRD system assessment in…
Coherence Threshold and the Continuity of Processing: The RI-Val Model of Comprehension
ERIC Educational Resources Information Center
O'Brien, Edward J.; Cook, Anne E.
2016-01-01
Common to all models of reading comprehension is the assumption that a reader's level of comprehension is heavily influenced by their standards of coherence (van den Broek, Risden, & Husbye-Hartman, 1995). Our discussion focuses on a subcomponent of the readers' standards of coherence: the coherence threshold. We situate this discussion within…
Impact Testing and Analysis of Composites for Aircraft Engine Fan Cases
NASA Technical Reports Server (NTRS)
Roberts, Gary D.; Revilock, Duane M.; Binienda, Wieslaw K.; Nie, Walter Z.; Mackenzie, S. Ben; Todd, Kevin B.
2002-01-01
The fan case in a jet engine is a heavy structure because of its size and because of the requirement that it contain a blade released during engine operation. Composite materials offer the potential for reducing the weight of the case. Efficient design, test, and analysis methods are needed to efficiently evaluate the large number of potential composite materials and design concepts. The type of damage expected in a composite case under blade-out conditions was evaluated using a subscale test in which a glass/epoxy composite half-ring target was impacted with a wedge-shaped titanium projectile. Fiber shearing occurred near points of contact between the projectile and target. Delamination and tearing occurred on a larger scale. These damage modes were reproduced in a simpler test in which flat glass/epoxy composites were impacted with a blunt cylindrical projectile. A surface layer of ceramic eliminated fiber shear fracture but did not reduce delamination. Tests on 3D woven carbon/epoxy composites indicated that transverse reinforcement is effective in reducing delamination. A 91 cm (36 in.) diameter full-ring sub-component was proposed for larger scale testing of these and other composite concepts. Explicit, transient, finite element analyses indicated that a full-ring test is needed to simulate complete impact dynamics, but simpler tests using smaller ring sections are adequate when evaluation of initial impact damage is the primary concern.
Taghdiri, Foad; Chung, Jonathan; Irwin, Samantha; Multani, Namita; Tarazi, Apameh; Ebraheem, Ahmed; Khodadadi, Mozghan; Goswami, Ruma; Wennberg, Richard; Mikulis, David; Green, Robin; Davis, Karen; Tator, Charles; Eizenman, Moshe; Tartaglia, Maria Carmela
2018-03-01
The aim of this study was to examine the potential utility of a self-paced saccadic eye movement as a marker of post-concussion syndrome (PCS) and monitoring the recovery from PCS. Fifty-nine persistently symptomatic participants with at least two concussions performed the self-paced saccade (SPS) task. We evaluated the relationships between the number of SPSs and 1) number of self-reported concussion symptoms, and 2) integrity of major white matter (WM) tracts (as measured by fractional anisotropy [FA] and mean diffusivity) that are directly or indirectly involved in saccadic eye movements and often affected by concussion. These tracts included the uncinate fasciculus (UF), cingulum (Cg) and its three subcomponents (subgenual, retrosplenial, and parahippocampal), superior longitudinal fasciculus, and corpus callosum. Mediation analyses were carried out to examine whether specific WM tracts (left UF and left subgenual Cg) mediated the relationship between the number of SPSs and 1) interval from last concussion or 2) total number of self-reported symptoms. The number of SPSs was negatively correlated with the total number of self-reported symptoms (r = -0.419, p = 0.026). The number of SPSs were positively correlated with FA of left UF and left Cg (r = 0.421, p = 0.013 and r = 0.452, p = 0.008; respectively). FA of the subgenual subcomponent of the left Cg partially mediated the relationship between the total number of symptoms and the number of SPSs, while FA of the left UF mediated the relationship between interval from last concussion and the number of SPSs. In conclusion, SPS testing as a fast and objective assessment may reflect symptom burden in patients with PCS. In addition, since the number of SPSs is associated with the integrity of some WM tracts, it may be useful as a diagnostic biomarker in patients with PCS.
ERIC Educational Resources Information Center
Dang, Cai-Ping; Braeken, Johan; Ferrer, Emilio; Liu, Chang
2012-01-01
This study explored the controversy surrounding working memory: whether it is a unitary system providing general purpose resources or a more differentiated system with domain-specific sub-components. A total of 348 participants completed a set of 6 working memory tasks that systematically varied in storage target contents and type of information…
ERIC Educational Resources Information Center
Zurcher, Louis A., Jr.
This book presents some of the experiences of men and women, poor and not poor, who participated in a community's OEO poverty program. The research upon which this book was based focused upon those subcomponents of the program which best revealed the process experiences of the participants. The study was concerned with three major components of…
Automated Comprehensive Evaluation of mTBI Visual Dysfunction
2017-04-01
Discussion: The results show that all ANAM subcomponents, except for math processing, are reduced in the mTBI population compared to controls. In...0.002534553 Math Processing 0.099382065 Match to Sample 0.004264635 Table 2. MACE p‐value Orientation ‐ Month 0.325052733 Orientation ‐ Date
ERIC Educational Resources Information Center
Tobias, Robert; And Others
During 1983-84, the Public Law 89-313 program served 2,053 students who were formerly educated in State-operated or State-supported schools through the following components and subcomponents: the Regional Services Instructional Support Unit; Citywide Services, consisting of Instructional Supplies and Equipment and Hearing Education Services; and…
Assessing Number Sense Performance of Indonesian Elementary School Students
ERIC Educational Resources Information Center
Purnomo, Yoppy Wahyu; Kowiyah; Alyani, Fitri; Assiti, Saliza S.
2014-01-01
The intention of the present study is to know how students' performance on number sense based on the components of number sense and also the sub-components in it. The participants of the study are 80 six graders (12-13 year-old) from three different schools that represent the city, rural, and small town areas. The data were collected using the…
ERIC Educational Resources Information Center
Alavinia, Parviz; Mollahossein, Hassan
2012-01-01
The researchers in the current study were after gauging the would-be correlation between emotional intelligence (and its subcomponents), on the one hand and the use of listening metacognitive strategies by academic EFL learners on the other. The study at hand benefited from 72 female and 40 male university students from Urmia University, Urmia…
ERIC Educational Resources Information Center
Andersson, Ulf
2008-01-01
Background: The study was conducted in an attempt to further our understanding of how working memory contributes to written arithmetical skills in children. Aim: The aim was to pinpoint the contribution of different central executive functions and to examine the contribution of the two subcomponents of children's written arithmetical skills.…
Empathic competencies in violent offenders☆
Seidel, Eva-Maria; Pfabigan, Daniela Melitta; Keckeis, Katinka; Wucherer, Anna Maria; Jahn, Thomas; Lamm, Claus; Derntl, Birgit
2013-01-01
Violent offending has often been associated with a lack of empathy, but experimental investigations are rare. The present study aimed at clarifying whether violent offenders show a general empathy deficit or specific deficits regarding the separate subcomponents. To this end, we assessed three core components of empathy (emotion recognition, perspective taking, affective responsiveness) as well as skin conductance response (SCR) in a sample of 30 male violent offenders and 30 healthy male controls. Data analysis revealed reduced accuracy in violent offenders compared to healthy controls only in emotion recognition, and that a high number of violent assaults was associated with decreased accuracy in perspective taking for angry scenes. SCR data showed reduced physiological responses in the offender group specifically for fear and disgust stimuli during emotion recognition and perspective taking. In addition, higher psychopathy scores in the violent offender group were associated with reduced accuracy in affective responsiveness. This is the first study to show that mainly emotion recognition is deficient in violent offenders whereas the other components of empathy are rather unaffected. This divergent impact of violent offending on the subcomponents of empathy suggests that all three empathy components can be targeted by therapeutic interventions separately. PMID:24035702
Enhanced Component Performance Study: Emergency Diesel Generators 1998–2014
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schroeder, John Alton
2015-11-01
This report presents an enhanced performance evaluation of emergency diesel generators (EDGs) at U.S. commercial nuclear power plants. This report evaluates component performance over time using (1) Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES) data from 1998 through 2014 and (2) maintenance unavailability (UA) performance data from Mitigating Systems Performance Index (MSPI) Basis Document data from 2002 through 2014. The objective is to show estimates of current failure probabilities and rates related to EDGs, trend these data on an annual basis, determine if the current data are consistent with the probability distributions currently recommended for use inmore » NRC probabilistic risk assessments, show how the reliability data differ for different EDG manufacturers and for EDGs with different ratings; and summarize the subcomponents, causes, detection methods, and recovery associated with each EDG failure mode. Engineering analyses were performed with respect to time period and failure mode without regard to the actual number of EDGs at each plant. The factors analyzed are: sub-component, failure cause, detection method, recovery, manufacturer, and EDG rating. Six trends with varying degrees of statistical significance were identified in the data.« less
Neural basis of hierarchical visual form processing of Japanese Kanji characters.
Higuchi, Hiroki; Moriguchi, Yoshiya; Murakami, Hiroki; Katsunuma, Ruri; Mishima, Kazuo; Uno, Akira
2015-12-01
We investigated the neural processing of reading Japanese Kanji characters, which involves unique hierarchical visual processing, including the recognition of visual components specific to Kanji, such as "radicals." We performed functional MRI to measure brain activity in response to hierarchical visual stimuli containing (1) real Kanji characters (complete structure with semantic information), (2) pseudo Kanji characters (subcomponents without complete character structure), (3) artificial characters (character fragments), and (4) checkerboard (simple photic stimuli). As we expected, the peaks of the activation in response to different stimulus types were aligned within the left occipitotemporal visual region along the posterior-anterior axis in order of the structural complexity of the stimuli, from fragments (3) to complete characters (1). Moreover, only the real Kanji characters produced functional connectivity between the left inferotemporal area and the language area (left inferior frontal triangularis), while pseudo Kanji characters induced connectivity between the left inferotemporal area and the bilateral cerebellum and left putamen. Visual processing of Japanese Kanji takes place in the left occipitotemporal cortex, with a clear hierarchy within the region such that the neural activation differentiates the elements in Kanji characters' fragments, subcomponents, and semantics, with different patterns of connectivity to remote regions among the elements.
Therapeutics incorporating blood constituents.
Charoenphol, Phapanin; Oswalt, Katie; Bishop, Corey J
2018-04-05
Blood deficiency and dysfunctionality can result in adverse events, which can primarily be treated by transfusion of blood or the re-introduction of properly functioning sub-components. Blood constituents can be engineered on the sub-cellular (i.e., DNA recombinant technology) and cellular level (i.e., cellular hitchhiking for drug delivery) for supplementing and enhancing therapeutic efficacy, in addition to rectifying dysfunctioning mechanisms (i.e., clotting). Herein, we report the progress of blood-based therapeutics, with an emphasis on recent applications of blood transfusion, blood cell-based therapies and biomimetic carriers. Clinically translated technologies and commercial products of blood-based therapeutics are subsequently highlighted and perspectives on challenges and future prospects are discussed. Blood-based therapeutics is a burgeoning field and has advanced considerably in recent years. Blood and its constituents, with and without modification (i.e., combinatorial), have been utilized in a broad spectrum of pre-clinical and clinically-translated treatments. This review article summarizes the most up-to-date progress of blood-based therapeutics in the following contexts: synthetic blood substitutes, acellular/non-recombinant therapies, cell-based therapies, and therapeutic sub-components. The article subsequently discusses clinically-translated technologies and future prospects thereof. Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Full-Scale Test and Analysis of a PRSEUS Fuselage Panel to Assess Damage-Containment Features
NASA Technical Reports Server (NTRS)
Bergan, Andrew; Bakuckas, John G.; Lovejoy, Andrew E.; Jegley, Dawn C.; Linton, Kim A.; Korkosz, Gregory; Awerbuch, Jonathan; Tan, Tein-Min
2011-01-01
Stitched composite technology has the potential to substantially decrease structural weight through enhanced damage containment capabilities. The most recent generation of stitched composite technology, the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept, has been shown to successfully arrest damage at the sub-component level through tension testing of a three stringer panel with damage in the form of a two-bay notch. In a joint effort undertaken by the National Aeronautics and Space Administration (NASA), the Federal Aviation Administration (FAA), and the Boeing Company, further studies are being conducted to characterize the damage containment features of the PRSEUS concept. A full-scale residual strength test will be performed on a fuselage panel to determine if the load capacity will meet strength, deformation, and damage tolerance requirements. A curved panel was designed, fabricated, and prepared for residual strength testing. A pre-test Finite Element Model (FEM) was developed using design allowables from previous test programs to predict test panel deformation characteristics and margins of safety. Three phases of testing with increasing damage severity include: (1) as manufactured; (2) barely visible impact damage (BVID) and visible impact damage (VID); and (3) discrete source damage (DSD) where the panel will be loaded to catastrophic failure. This paper presents the background information, test plan, and experimental procedure. This paper is the first of several future articles reporting the test preparations, results, and analysis conducted in the test program.
HSCT Sector Combustor Evaluations for Demonstration Engine
NASA Technical Reports Server (NTRS)
Greenfield, Stuart; Heberling, Paul; Kastl, John; Matulaitis, John; Huff, Cynthia
2004-01-01
In LET Task 10, critical development issues of the HSCT lean-burn low emissions combustor were addressed with a range of engineering tools. Laser diagnostics and CFD analysis were applied to develop a clearer understanding of the fuel-air premixing process and premixed combustion. Subcomponent tests evaluated the emissions and operability performance of the fuel-air premixers. Sector combustor tests evaluated the performance of the integrated combustor system. A 3-cup sector was designed and procured for laser diagnostics studies at NASA Glenn. The results of these efforts supported the earlier selection of the Cyclone Swirler as the pilot stage premixer and the IMFH (Integrated Mixer Flame Holder) tube as the main stage premixer of the LPP combustor. In the combustor system preliminary design subtask, initial efforts to transform the sector combustor design into a practical subscale engine combustor met with significant challenges. Concerns about the durability of a stepped combustor dome and the need for a removable fuel injection system resulted in the invention and refinement of the MRA (Multistage Radial Axial) combustor system in 1994. The MRA combustor was selected for the HSR Phase II LPP subscale combustor testing in the CPC Program.
Composite transport wing technology development
NASA Technical Reports Server (NTRS)
Madan, Ram C.
1988-01-01
The design, fabrication, testing, and analysis of stiffened wing cover panels to assess damage tolerance criteria are discussed. The damage tolerance improvements were demonstrated in a test program using full-sized cover panel subcomponents. The panels utilized a hard skin concept with identical laminates of 44-percent 0-degree, 44-percent plus or minus 45-degree, and 12-percent 90-degree plies in the skins and stiffeners. The panel skins were impacted at midbay between the stiffeners, directly over the stiffener, and over the stiffener flange edge. The stiffener blades were impacted laterally. Impact energy levels of 100 ft-lb and 200 ft-lb were used. NASTRAN finite-element analyses were performed to simulate the nonvisible damage that was detected in the panels by nondestructive inspection. A closed-form solution for generalized loading was developed to evaluate the peel stresses in the bonded structure. Two-dimensional delamination growth analysis was developed using the principle of minimum potential energy in terms of closed-form solution for critical strain. An analysis was conducted to determine the residual compressive stress in the panels after impact damage, and the analytical predictions were verified by compression testing of the damaged panels.
Development of Design Analysis Methods for C/SiC Composite Structures
NASA Technical Reports Server (NTRS)
Sullivan, Roy M.; Mital, Subodh K.; Murthy, Pappu L. N.; Palko, Joseph L.; Cueno, Jacques C.; Koenig, John R.
2006-01-01
The stress-strain behavior at room temperature and at 1100 C (2000 F) was measured for two carbon-fiber-reinforced silicon carbide (C/SiC) composite materials: a two-dimensional plain-weave quasi-isotropic laminate and a three-dimensional angle-interlock woven composite. Micromechanics-based material models were developed for predicting the response properties of these two materials. The micromechanics based material models were calibrated by correlating the predicted material property values with the measured values. Four-point beam bending sub-element specimens were fabricated with these two fiber architectures and four-point bending tests were performed at room temperature and at 1100 C. Displacements and strains were measured at various locations along the beam and recorded as a function of load magnitude. The calibrated material models were used in concert with a nonlinear finite element solution to simulate the structural response of these two materials in the four-point beam bending tests. The structural response predicted by the nonlinear analysis method compares favorably with the measured response for both materials and for both test temperatures. Results show that the material models scale up fairly well from coupon to subcomponent level.
Mechanical Properties of Triaxial Braided Carbon/Epoxy Composites
NASA Technical Reports Server (NTRS)
Bowman, C. L.; Roberts, G. D.; Braley, M. S.; Xie, M.; Booker, M. J.
2003-01-01
In an on-going effort to increase the safety and efficiency of turbine engines, the National Aeronautics and Space Administration is exploring lightweight alternatives to the metal containment structures that currently encase commercial jet engines. Epoxy reinforced with braided carbon fibers is a candidate structural material which may be suitable for an engine case. This paper reports flat-coupon mechanical-property experiments performed to compliment previously reported subcomponent impact testing and analytical simulation of containment structures. Triaxial-braid T700/5208 epoxy and triaxial-braid T700/M36 toughened epoxy composites were evaluated. Also, two triaxial-braid architectures (0 +/- 60 deg., 0 +/- 45 deg.) with the M36 resin were evaluated through tension, compression, and shear testing. Tensile behavior was compared between standard straight-sided specimens (ASTM D3039) and bowtie specimens. Both double-notch shear (ASTM D3846) and Iosepescu (ASTM D5379) tests were performed as well. The M36/0 +/- 45 deg. configuration yield the best response when measurements were made parallel to the axial tows. Conversely, the M36/0 +/- 60 deg. configuration was best when measurements were made perpendicular to the axial tows. The results were used to identify critical properties and to augment the analysis of impact experiments.
NASA Technical Reports Server (NTRS)
Zaller, Michelle; Anderson, Robert C.; Hicks, Yolanda R.; Locke, Randy J.
1999-01-01
In aviation gas turbine combustors, many factors, such as the degree and extent of fuel/air mixing and fuel vaporization achieved prior to combustion, influence the formation of undesirable pollutants. To assist in analyzing the extent of fuel/air mixing, flow visualization techniques have been used to interrogate the fuel distributions during subcomponent tests of lean-burning fuel injectors. Discrimination between liquid and vapor phases of the fuel was determined by comparing planar laser-induced fluorescence (PLIF) images, elastically-scattered light images, and phase/Doppler interferometer measurements. Estimates of Sauter mean diameters are made by ratioing PLIF and Mie scattered intensities for various sprays, and factors affecting the accuracy of these estimates are discussed. Mie calculations of absorption coefficients indicate that the fluorescence intensities of individual droplets are proportional to their surface areas, instead of their volumes, due to the high absorbance of the liquid fuel for the selected excitation wavelengths.
Modulating the Neutron Flux from a Mirror Neutron Source
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ryutov, D D
2011-09-01
A 14-MeV neutron source based on a Gas-Dynamic Trap will provide a high flux of 14 MeV neutrons for fusion materials and sub-component testing. In addition to its main goal, the source has potential applications in condensed matter physics and biophysics. In this report, the author considers adding one more capability to the GDT-based neutron source, the modulation of the neutron flux with a desired frequency. The modulation may be an enabling tool for the assessment of the role of non-steady-state effects in fusion devices as well as for high-precision, low-signal basic science experiments favoring the use of the synchronousmore » detection technique. A conclusion is drawn that modulation frequency of up to 1 kHz and modulation amplitude of a few percent is achievable. Limitations on the amplitude of modulations at higher frequencies are discussed.« less
Sinclair, Samuel J; Blais, Mark A; Gansler, David A; Sandberg, Elisabeth; Bistis, Kimberly; LoCicero, Alice
2010-03-01
The purpose of this study was twofold: (a) to evaluate the scaling assumptions and component structure of and present normative data for the Rosenberg Self-Esteem Scale (RSES) using a sample of US adults (N = 503), both overall and across demographic subgroups and (b) to provide new data regarding the relationship between the two RSES subcomponents of self-competence (SC) and self-liking (SL), and other demographic and clinical variables. As hypothesized, all psychometric tests supported the underlying structure of the RSES. Overall RSES scores varied significantly across age, racial and ethnic, education, employment status, income, and marital status groups. Furthermore, differences between SC and SL were also found across groups differing in gender, age, employment status, and marital status groups. The implications and limitations of this study are discussed, with an emphasis on clinical relevance.
Li, Fuhong; Cao, Bihua; Luo, Yuejia; Lei, Yi; Li, Hong
2013-02-01
Functional magnetic resonance imaging (fMRI) was used to examine differences in brain activation that occur when a person receives the different outcomes of hypothesis testing (HT). Participants were provided with a series of images of batteries and were asked to learn a rule governing what kinds of batteries were charged. Within each trial, the first two charged batteries were sequentially displayed, and participants would generate a preliminary hypothesis based on the perceptual comparison. Next, a third battery that served to strengthen, reject, or was irrelevant to the preliminary hypothesis was displayed. The fMRI results revealed that (1) no significant differences in brain activation were found between the 2 hypothesis-maintain conditions (i.e., strengthen and irrelevant conditions); and (2) compared with the hypothesis-maintain conditions, the hypothesis-reject condition activated the left medial frontal cortex, bilateral putamen, left parietal cortex, and right cerebellum. These findings are discussed in terms of the neural correlates of the subcomponents of HT and working memory manipulation. Copyright © 2012 Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Locke, Randy J.; Anderson, Robert C.; Zaller, Michelle M.; Hicks, Yolanda R.
1998-01-01
Increasingly severe constraints on emissions, noise and fuel efficiency must be met by the next generation of commercial aircraft powerplants. At NASA Lewis Research Center (LeRC) a cooperative research effort with industry is underway to design and test combustors that will meet these requirements. To accomplish these tasks, it is necessary to gain both a detailed understanding of the combustion processes and a precise knowledge of combustor and combustor sub-component performance at close to actual conditions. To that end, researchers at LeRC are engaged in a comprehensive diagnostic investigation of high pressure reacting flowfields that duplicate conditions expected within the actual engine combustors. Unique, optically accessible flame-tubes and sector rig combustors, designed especially for these tests. afford the opportunity to probe these flowfields with the most advanced, laser-based optical diagnostic techniques. However, these same techniques, tested and proven on comparatively simple bench-top gaseous flame burners, encounter numerous restrictions and challenges when applied in these facilities. These include high pressures and temperatures, large flow rates, liquid fuels, remote testing, and carbon or other material deposits on combustor windows. Results are shown that document the success and versatility of these nonintrusive optical diagnostics despite the challenges to their implementation in realistic systems.
Southeast Clinical Oncology Research Consortium, Inc. (SCOR) | Division of Cancer Prevention
The SCCC-Upstate is a merger of two successful legacy CCOPs known as Southeast Cancer Control Consortium, Inc. (SCCC) and Upstate Carolina (hereafter the Consortium) comprised of 23 components and 63 sub-components, located in a five-state area of the Southeast US (GA, NC, SC, TN, and VA) with a nonclinical Administrative Office (AO) in Winston-Salem, NC. The Consortium
ERIC Educational Resources Information Center
Hasan, Md. Kamrul; Shabdin, Ahmad Affendi
2017-01-01
This study makes an attempt to investigate the correlations between manifold aspects, namely both syntagmatic and paradigmatic relations, the four major derivative word forms, which represented morphological knowledge, six dimensions of analytic relations (i.e. component-integral, member-collection, portion-mass, stuff-object, feature-activity,…
Connector device for building integrated photovoltaic device
Keenihan, James R.; Langmaid, Joe A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleerman, Robert J.; Gaston, Ryan S.
2015-11-10
The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.
Connector device for building integrated photovoltaic device
Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.
2014-06-03
The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.
Virtual Manufacturing (la Fabrication virtuelle)
1998-05-01
with moving parts and subassemblies, • verification of product subcomponents and systems operations through kinematics studies, and • realism ...dimensions, parts moved in mechanism based directions, and realism of interaction is increased through use of sound, touch and other parameters. For the...direct converters from CAD systems. A simple cinematic package is also high on the requirement to be able to simulate motions as well as an interface to
Leveraging the Cloud for Integrated Network Experimentation
2014-03-01
kernel settings, or any of the low-level subcomponents. 3. Scalable Solutions: Businesses can build scalable solutions for their clients , ranging from...values. These values 13 can assume several distributions that include normal, Pareto , uniform, exponential and Poisson, among others [21]. Additionally, D...communication, the web client establishes a connection to the server before traffic begins to flow. Web servers do not initiate connections to clients in
Carlos, Ruth C; Sicks, JoRean D; Chang, George J; Lyss, Alan P; Stewart, Teresa L; Sung, Lillian; Weaver, Kathryn E
2017-12-01
Cancer care spans the spectrum from screening and diagnosis through therapy and into survivorship. Delivering appropriate care requires patient transitions across multiple specialties, such as primary care, radiology, and oncology. From the program's inception, the National Cancer Institute Community Oncology Research Program (NCORP) sites were tasked with conducting cancer care delivery research (CCDR) that evaluates structural, organizational, and social factors, including care transitions that determine patient outcomes. The aim of this study is to describe the capacity of the NCORP to conduct multidisciplinary CCDR that includes radiology and primary care practices. The NCORP includes 34 community and 12 minority and underserved community sites. The Landscape Capacity Assessment was conducted in 2015 across these 46 sites, composed of the 401 components and subcomponents designated to conduct CCDR. Each respondent had the opportunity to designate an operational practice group, defined as a group of components and subcomponents with common care practices and resources. The primary outcomes were the proportion of adult oncology practice groups with affiliated radiology and primary care practices. The secondary outcomes were the proportion of those affiliated radiology and primary care groups that participate in research. Eighty-seven percent of components and subcomponents responded to at least some portion of the assessment, representing 230 practice groups. Analyzing the 201 adult oncology practice groups, 85% had affiliated radiologists, 69% of whom participate in research. Seventy-nine percent had affiliated primary care practitioners, 31% of whom participate in research. Institutional size, multidisciplinary group practice, and ownership by large regional or multistate health systems was associated with research participation by affiliated radiology and primary care groups. Research participation by these affiliated specialists was not significantly different between the community and the minority and underserved community sites. Research relationships exist between the majority of community oncology sites and affiliated radiology practices. Research relationships with affiliated primary care practices lagged. NCORP as a whole has the opportunity to encourage continued and expanded engagement where relationships exist. Where no relationship exists, the NCORP can encourage recruitment, particularly of primary care practices as partners. Copyright © 2017. Published by Elsevier Inc.
THE SPATIAL STRUCTURE OF MONO-ABUNDANCE SUB-POPULATIONS OF THE MILKY WAY DISK
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bovy, Jo; Rix, Hans-Walter; Liu Chao
2012-07-10
The spatial, kinematic, and elemental-abundance structure of the Milky Way's stellar disk is complex, and has been difficult to dissect with local spectroscopic or global photometric data. Here, we develop and apply a rigorous density modeling approach for Galactic spectroscopic surveys that enables investigation of the global spatial structure of stellar sub-populations in narrow bins of [{alpha}/Fe] and [Fe/H], using 23,767 G-type dwarfs from SDSS/SEGUE, which effectively sample 5 kpc < R{sub GC} < 12 kpc and 0.3 kpc {approx}< |Z| {approx}< 3 kpc. We fit models for the number density of each such ([{alpha}/Fe] and [Fe/H]) mono-abundance component, properlymore » accounting for the complex spectroscopic SEGUE sampling of the underlying stellar population, as well as for the metallicity and color distributions of the samples. We find that each mono-abundance sub-population has a simple spatial structure that can be described by a single exponential in both the vertical and radial directions, with continuously increasing scale heights ( Almost-Equal-To 200 pc to 1 kpc) and decreasing scale lengths (>4.5 kpc to 2 kpc) for increasingly older sub-populations, as indicated by their lower metallicities and [{alpha}/Fe] enhancements. That the abundance-selected sub-components with the largest scale heights have the shortest scale lengths is in sharp contrast with purely geometric 'thick-thin disk' decompositions. To the extent that [{alpha}/Fe] is an adequate proxy for age, our results directly show that older disk sub-populations are more centrally concentrated, which implies inside-out formation of galactic disks. The fact that the largest scale-height sub-components are most centrally concentrated in the Milky Way is an almost inevitable consequence of explaining the vertical structure of the disk through internal evolution. Whether the simple spatial structure of the mono-abundance sub-components and the striking correlations between age, scale length, and scale height can be plausibly explained by satellite accretion or other external heating remains to be seen.« less
Lillis, Jason; Thomas, J. Graham; Seng, Elizabeth K.; Lipton, Richard B.; Pavlovic, Jelena; Rathier, Lucille; Roth, Julie; O’Leary, Kevin C.; Bond, Dale S.
2018-01-01
BACKGROUND Pain acceptance involves willingness to experience pain and engaging in valued activities while pain is present. Though pain acceptance could limit both headache-related disability and pain interference in individuals with migraine, few studies have addressed this issue. The current study evaluated whether higher levels of total pain acceptance and it’s 2 subcomponents, pain willingness and activity engagement, were associated with lower levels of headache-related impairment in women who had both migraine and overweight/obesity. METHODS In this cross-sectional study, participants seeking weight loss and headache relief in the Women’s Health and Migraine (WHAM) trial completed baseline measures of pain acceptance (Chronic Pain Acceptance Questionnaire [CPAQ]), headache-related disability (Headache Impact Test-6 [HIT-6]), and pain interference (Brief Pain Inventory [BPI]). Migraine headache frequency and pain intensity were assessed daily via smartphone diary. Using CPAQ total and subcomponent (pain willingness and activity engagement) scores, headache frequency, pain intensity, and BMI as predictors in linear regression, headache-related disability and pain interference were modeled as outcomes. RESULTS On average, participants (n=126; age=38.5±8.2 years; BMI=35.3±6.6 kg/m2) reported 8.4±4.7 migraine days/month and pain intensity of 6.0±1.5 on a 0–10 scale on headache days. After correcting for multiple comparisons (adjusted α=.008), pain willingness was independently associated with both lower headache related disability (p<.001; β=−.233) and pain interference (p<.001; β= −.261). Activity engagement was not associated with headache related disability (p=.128; β= −.138) and pain interference (p=.042; β= −.154). CPAQ Total Score was not associated with headache related disability (p=.439; β=.066) and pain interference (p=.305; β=.074). Pain intensity was significantly associated with outcomes in all analyses (p’s <.001; β’s .343−.615). CONCLUSIONS Higher pain willingness, independent of degree of both migraine severity and overweight, is associated with lower headache-related disability and general pain interference in treatment-seeking women with migraine and overweight/obesity. Future studies are needed to clarify direction of causality and test whether strategies designed to help women increase pain willingness, or relinquish ineffective efforts to control pain, can improve functional outcomes in women who have migraine and overweight/obesity. PMID:28295273
Parietal association deficits in patients harboring parietal lobe gliomas: a prospective study.
Liouta, Evangelia; Stranjalis, George; Kalyvas, Aristotelis V; Koutsarnakis, Christos; Pantinaki, Stavroula; Liakos, Faidon; Komaitis, Spyros; Stavrinou, Lampis C
2018-05-04
OBJECTIVE Although the parietal lobe is a common site for glioma formation, current literature is scarce, consists of retrospective studies, and lacks consistency with regard to the incidence, nature, and severity of parietal association deficits (PADs). The aim of this study was to assess the characteristics and incidence of PADs in patients suffering from parietal lobe gliomas through a prospective study and a battery of comprehensive neuropsychological tests. METHODS Between 2012 and 2016 the authors recruited 38 patients with glioma confined in the parietal lobe. Patients were examined for primary and secondary association deficits with a dedicated battery of neuropsychological tests. The PADs were grouped into 5 categories: visuospatial attention, gnosis, praxis, upper-limb coordination, and language. For descriptive analysis tumors were divided into high- and low-grade gliomas and also according to patient age and tumor size. RESULTS Parietal association deficits were elicited in 80% of patients, thus being more common than primary deficits (50%). Apraxia was the most common PAD (47.4%), followed by anomic aphasia and subcomponents of Gerstmann's syndrome (34.2% each). Other deficits such as hemineglect, stereoagnosia, extinction, and visuomotor ataxia were also detected, albeit at lower rates. There was a statistically nonsignificant difference between PADs and sex (72.2% males, 85% females) and age (77.8% at ≤ 60 years, 80% at age > 60 years), but a statistically significant difference between the > 4 cm and the ≤ 4 cm diameter group (p = 0.02, 94.7% vs 63.2%, respectively). There was a tendency (p = 0.094) for low-grade gliomas to present with fewer PADs (50%) than high-grade gliomas (85.7%). Tumor laterality showed a strong correlation with hemineglect (p = 0.004, predilection for right hemisphere), anomia (p = 0.001), and Gerstmann's symptoms (p = 0.01); the last 2 deficits showed a left (dominant) hemispheric preponderance. CONCLUSIONS This is the first study to prospectively evaluate the incidence and nature of PADs in patients with parietal gliomas. It could be that the current literature may have underestimated the true incidence of deficits. Dedicated neuropsychological examination detects a high frequency of PADs, the most common being apraxia, followed by anomia and subcomponents of Gerstmann's syndrome. Nevertheless, a direct correlation between the clinical deficit and its anatomical substrate is only possible to a limited extent, highlighting the need for intraoperative cortical and subcortical functional mapping.
Federico, D; Thomas-Anterion, C; Borg, C; Foyatier Michel, N; Dirson, S; Laurent, B
2008-10-01
Episodic memory is often considered to be essential in the neuropsychological examination of elderly people consulting in the memory clinics. Therefore, the performance of three different episodic memory tests were compared in Alzheimer's disease (AD), mild cognitive impairment (MCI) and anxiety/depression. Seventy-six patients with AD, 46 with MCI, and 36 with anxiety/depression performed three memory tests: (1) three-words immediate and delayed recall of the MMSE test; (2) 10-pictures reminding test; (3) 16-items free and cued reminding test. Patients with AD and MCI differed from the depressed/anxious participants on all subcomponents of the memory tests. Only the three-words immediate and delayed recall in the MMSE test as well as the immediate recall (encoding) of the free and cued reminding test (16-items) did not differ between AD and MCI. Significant correlations were also evidenced between the free and cued recall of the 10 pictures and the score of the 16-items for all patients. Scores of total and free recalls distinguished the three group of patients; also, a trend was observed for the free recall between the patients with AD and MCI. The three-words immediate and delayed recall of the MMSE test is linked with hippocampic dysfunction. Also, the present study suggests that the 10-pictures reminding test, is a simple and reliable test for investigating memory, in addition to other evaluation tests. Finally, further studies would be necessary to assess the sensitivity and specificity of the tests.
ERIC Educational Resources Information Center
Skorich, Daniel P.; Gash, Tahlia B.; Stalker, Katie L.; Zheng, Lidan; Haslam, S. Alexander
2017-01-01
The social difficulties of autism spectrum disorder (ASD) are typically explained as a disruption in the Shared Attention Mechanism (SAM) sub-component of the theory of mind (ToM) system. In the current paper, we explore the hypothesis that SAM's capacity to construct the self-other-object relations necessary for shared-attention arises from a…
Determinants of employee punctuality.
Dishon-Berkovits, Miriam; Koslowsky, Meni
2002-12-01
Although researchers have studied employee lateness empirically (e.g., S. Adler & J. Golan, 1981; C. W. Clegg, 1983), few have attempted to describe the punctual employee. In the present study, results of a discriminant analysis on employees in Israel indicated that a personality characteristic, time urgency, a subcomponent of Type A behavioral pattern, distinguished between punctual and late employees. Organizational commitment and age of employee's youngest child also distinguished between the groups.
Technical summary of accomplishments made in preparation for the USSR barley exploratory experiment
NASA Technical Reports Server (NTRS)
Chapman, G. M.; Dailey, C. L.
1982-01-01
The highlights of the work accomplished under each subcomponent of the U.S.S.R. Barley Pilot Experiment, which is scheduled for completion in 1984, are summarized. A significant amount of developmental system implementation activity was in the final stages of preparation prior to the rescoping of project tasks. Unpublished materials which are significant to this exploratory experiment are incorporated into the appendixes.
Dimeric, trimeric and tetrameric complexes of immunoglobulin G fix complement.
Wright, J K; Tschopp, J; Jaton, J C; Engel, J
1980-01-01
The binding of pure dimers, trimers and tetramers of randomly cross-linked non-immune rabbit immunoglobulin G to the first component and subcomponent of the complement system, C1 and C1q respectively, was studied. These oligomers possessed open linear structures. All three oligomers fixed complement with decreasing affinity in the order: tetramer, trimer, dimer. Complement fixation by dimeric immunoglobulin exhibited the strongest concentration-dependence. No clear distinction between a non-co-operative and a co-operative binding mechanism could be achieved, although the steepness of the complement-fixation curves for dimers and trimers was better reflected by the co-operative mechanism. Intrinsic binding constants were about 10(6)M-1 for dimers, 10(7)M-1 for trimers and 3 X 10(9)M-1 for tetramers, assuming non-co-operative binding. The data are consistent with a maximum valency of complement component C1 for immunoglobulin G protomers in the range 6-18. The binding of dimers to purified complement subcomponent C1q was demonstrated by sedimentation-velocity ultracentrifugation. Mild reduction of the complexes by dithioerythritol caused the immunoglobulin to revert to the monomeric state (S20,w = 6.2-6.5S) with concomitant loss of complement-fixing ability. Images Fig. 2. PMID:6985362
Electron Beam-Cure Polymer Matrix Composites: Processing and Properties
NASA Technical Reports Server (NTRS)
Wrenn, G.; Frame, B.; Jensen, B.; Nettles, A.
2001-01-01
Researchers from NASA and Oak Ridge National Laboratory are evaluating a series of electron beam curable composites for application in reusable launch vehicle airframe and propulsion systems. Objectives are to develop electron beam curable composites that are useful at cryogenic to elevated temperatures (-217 C to 200 C), validate key mechanical properties of these composites, and demonstrate cost-saving fabrication methods at the subcomponent level. Electron beam curing of polymer matrix composites is an enabling capability for production of aerospace structures in a non-autoclave process. Payoffs of this technology will be fabrication of composite structures at room temperature, reduced tooling cost and cure time, and improvements in component durability. This presentation covers the results of material property evaluations for electron beam-cured composites made with either unidirectional tape or woven fabric architectures. Resin systems have been evaluated for performance in ambient, cryogenic, and elevated temperature conditions. Results for electron beam composites and similar composites cured in conventional processes are reviewed for comparison. Fabrication demonstrations were also performed for electron beam-cured composite airframe and propulsion piping subcomponents. These parts have been built to validate manufacturing methods with electron beam composite materials, to evaluate electron beam curing processing parameters, and to demonstrate lightweight, low-cost tooling options.
Patterson, P Daniel; Suyama, Joe; Reis, Steven E; Weaver, Matthew D; Hostler, David
2013-01-01
Cardiac arrest is a leading cause of mortality among firefighters. We sought to develop a valid method for determining the costs of a workplace prevention program for firefighters. In 2012, we developed a draft framework using human resource accounting and in-depth interviews with experts in the firefighting and insurance industries. The interviews produced a draft cost model with 6 components and 26 subcomponents. In 2013, we randomly sampled 100 fire chiefs out of >7,400 affiliated with the International Association of Fire Chiefs. We used the Content Validity Index (CVI) to identify the content valid components of the draft cost model. This was accomplished by having fire chiefs rate the relevancy of cost components using a 4-point Likert scale (highly relevant to not relevant). We received complete survey data from 65 fire chiefs (65% response rate). We retained 5 components and 21 subcomponents based on CVI scores ≥0.70. The five main components include, (1) investment costs, (2) orientation and training costs, (3) medical and pharmaceutical costs, (4) education and continuing education costs, and (5) maintenance costs. Data from a diverse sample of fire chiefs has produced a content valid method for calculating the cost of a prevention program among firefighters.
Patterson, P. Daniel; Suyama, Joe; Reis, Steven E.; Weaver, Matthew D.; Hostler, David
2013-01-01
Cardiac arrest is a leading cause of mortality among firefighters. We sought to develop a valid method for determining the costs of a workplace prevention program for firefighters. In 2012, we developed a draft framework using human resource accounting and in-depth interviews with experts in the firefighting and insurance industries. The interviews produced a draft cost model with 6 components and 26 subcomponents. In 2013, we randomly sampled 100 fire chiefs out of >7,400 affiliated with the International Association of Fire Chiefs. We used the Content Validity Index (CVI) to identify the content valid components of the draft cost model. This was accomplished by having fire chiefs rate the relevancy of cost components using a 4-point Likert scale (highly relevant to not relevant). We received complete survey data from 65 fire chiefs (65% response rate). We retained 5 components and 21 subcomponents based on CVI scores ≥0.70. The five main components include, (1) investment costs, (2) orientation and training costs, (3) medical and pharmaceutical costs, (4) education and continuing education costs, and (5) maintenance costs. Data from a diverse sample of fire chiefs has produced a content valid method for calculating the cost of a prevention program among firefighters. PMID:24455288
NASA Astrophysics Data System (ADS)
Farjoud, Alireza; Taylor, Russell; Schumann, Eric; Schlangen, Timothy
2014-02-01
This paper is focused on modelling, design, and testing of semi-active magneto-rheological (MR) engine and transmission mounts used in the automotive industry. The purpose is to develop a complete analysis, synthesis, design, and tuning tool that reduces the need for expensive and time-consuming laboratory and field tests. A detailed mathematical model of such devices is developed using multi-physics modelling techniques for physical systems with various energy domains. The model includes all major features of an MR mount including fluid dynamics, fluid track, elastic components, decoupler, rate-dip, gas-charged chamber, MR fluid rheology, magnetic circuit, electronic driver, and control algorithm. Conventional passive hydraulic mounts can also be studied using the same mathematical model. The model is validated using standard experimental procedures. It is used for design and parametric study of mounts; effects of various geometric and material parameters on dynamic response of mounts can be studied. Additionally, this model can be used to test various control strategies to obtain best vibration isolation performance by tuning control parameters. Another benefit of this work is that nonlinear interactions between sub-components of the mount can be observed and investigated. This is not possible by using simplified linear models currently available.
Mechanical Properties of Triaxial Braided Carbon/Epoxy Composites
NASA Technical Reports Server (NTRS)
Bowman, C. L.; Roberts, G. D.; Braley, M. S.; Xie, M.; Booker, M. J.
2003-01-01
In an on-going effort to increase the safety and efficiency of turbine engines, the National Aeronautics and Space Administration is exploring lightweight alternatives to the metal containment structures that currently encase commercial jet engines. Epoxy reinforced with braided carbon fibers is a candidate structural material which may be suitable for an engine case. This paper reports flat-coupon mechanical-property experiments performed to compliment previously reported subcomponent impact testing and analytical simulation of containment structures. Triaxial-braid T700/5208 epoxy and triaxial-braid T700h436 toughened epoxy composites were evaluated. Also, two triaxial-braid architectures (0 degrees plus or minus 60 degrees, and 0 degrees plus or minus 45 degrees) with the M36 resin were evaluated through tension, compression, and shear testing. Tensile behavior was compared between standard straight-sided specimens (ASTM D3039) and bow-tie specimens. Both double-notch shear (ASTM D3846) and Iosepescu (ASTM D5379) tests were performed as well. The M36/O degrees plus or minus 45 degrees configuration yield the best response when measurements were made parallel to the axial tows. Conversely, the M36/0 degrees plus or minus 60 degrees configuration was best when measurements were made perpendicular to the axial tows. The results were used to identify critical properties and to augment the analysis of impact experiments.
Modeling and Optimization of Renewable and Hybrid Fuel Cell Systems for Space Power and Propulsion
2010-11-14
For that the project achieved: the optimization of SOFC and PEMFC internal structure and external shape under a volume constraint; an initial set of...subcomponent models for regenerative, renewable fuel cell system (RFC); the integration of PEMFC into RFC systems were developed; power electronic...with the same objectives and goals but using a PEMFC regenerative system instead. This research group studied and published on the optimization and
2010-11-01
such as pay increases, promotions, increases in leader- ship responsibility, leadership performance /behavior ratings, and satisfaction at work. The... Vroom , 1964), self-efficacy (or expectation that one will succeed at a task) is a sub-component or direct predictor of overall motivation to perform a... satisfaction . Comparing Motivation to Lead and Motivation to Develop Leadership in Predicting Leadership Performance and Career Success In this
Study of a 3×3 module array of the ECAL0 calorimeter with an electron beam at the ELSA
NASA Astrophysics Data System (ADS)
Dziewiecki, M.; Anfimov, N.; Anosov, V.; Barth, J.; Chalyshev, V.; Chirikov-Zorin, I.; Elsner, D.; Frolov, V.; Frommberger, F.; Guskov, A.; Klein, F.; Krumshteyn, Z.; Kurjata, R.; Marzec, J.; Nagaytsev, A.; Olchevski, A.; Orlov, I.; Rybnikov, A.; Rychter, A.; Selyunin, A.; Zaremba, K.; Ziembicki, M.
2015-02-01
ECAL0 is a new electromagnetic calorimeter designed for studying generalized parton distributions at the COMPASS II experiment at CERN. It will be located next to the target and will cover larger photon angles (up to 30 degrees). It is a modular high-granularity Shashlyk device with total number of individual channels of approx. 1700 and readout based on wavelength shifting fibers and micropixel avalanche photodiodes. Characterization of the calorimeter includes tests of particular sub-components, tests of complete modules and module arrays, as well as a pilot run of a fully-functional, quarter-size prototype in the COMPASS experiment. The main goals of the tests on low-intensity electron beam at the ELSA accelerator in Bonn were: to provide energy calibration using electrons, to measure angular response of the calorimeter and to perform an energy scan to cross-check previously collected data. A dedicated measurement setup was prepared for the tests, including a 3x3 array of the ECAL0 modules, a scintillating-fibre hodoscope and a remotely-controlled motorized movable platform. The measurements were performed using three electron energies: 3.2 GeV, 1.6 GeV and 0.8 GeV. They include a calibration of the whole detector array with a straight beam and multiple angular scans.
Wachholz, Thalita Bianchi de Oliveira; Yassuda, Mônica Sanches
2011-01-01
It is now known that cognitive functions tend to decline with age. Executive functions (EF) are among the first abilities to decline with aging. A subcomponent of the EF is abstract reasoning. The Test of Proverbs is an instrument that can be used to evaluate the capacity of abstract reasoning. Objective To examine the association of performance in interpretation of proverbs, with education and with episodic memory and EF tasks. Methods A total of 67 individuals aged between 60 and 75 years were evaluated, and divided into three categories of education: 1-4 years, 5-8 years, and 9 or more years of schooling. The instruments used were a sociodemographic questionnaire (gender, age, marital status, education, income, previous occupation, current occupation and health perception), the Mini Mental State Examination, Brief Cognitive Screening Battery; Geriatric Depression Scale; Forward and Backward Digit Span (WAIS-III), and the Test of Proverbs. Results A high impact of education was seen on the interpretation of proverbs, with lower performance among the elderly with less education. A significant association between performance on the Test of Proverbs and scores on the MMSE, GDS, and verbal fluency tests was found. There was a modest association with incidental memory. Conclusions The capacity to interpret proverbs is strongly associated with education and with performance on other EF tasks. PMID:29213717
Carbon-Carbon Composite Radiator Development for the EO-1 Spacecraft
NASA Technical Reports Server (NTRS)
Vaughn, Wallace; Shinn, Elizabeth; Rawal, Suraj; Wright, Joe
2004-01-01
The Carbon-Carbon Space Radiator Partnership (CSRP), an informal partnership of Government and industrial personnel, was formed to promote the use of Carbon-carbon composites (C-C) as engineering materials for spacecraft thermal management applications . As a part of this effort the partnership has built a structural radiator for the Earth Orbiter - 1 (EO-1) spacecraft. This radiator, using C-C face-sheets with an aluminum honeycomb core, will demonstrate both the thermal and structural properties of C-C under actual service conditions as well as provide performance data from space flight. This paper will present results from the design of the radiator, the thermal/mechanical tests of the facesheet materials, and sub-component test results on the C-C/Al honeycomb sandwich material. The 29- by 28-inch radiator was designed to support two electronics boxes with a combined heat output of 60 watts maximum and a weight of 58 lbs. The analysis of the radiator design shows that the radiator constructed with 20-mil-thick facesheets of a P30-fiber-reinforced C-C from BFGoodrich is able to meet or exceed all the required thermal and mechanical requirements.
Low Emissions RQL Flametube Combustor Component Test Results
NASA Technical Reports Server (NTRS)
Holdeman, James D.; Chang, Clarence T.
2001-01-01
This report describes and summarizes elements of the High Speed Research (HSR) Low Emissions Rich burn/Quick mix/Lean burn (RQL) flame tube combustor test program. This test program was performed at NASA Glenn Research Center circa 1992. The overall objective of this test program was to demonstrate and evaluate the capability of the RQL combustor concept for High Speed Civil Transport (HSCT) applications with the goal of achieving NOx emission index levels of 5 g/kg-fuel at representative HSCT supersonic cruise conditions. The specific objectives of the tests reported herein were to investigate component performance of the RQL combustor concept for use in the evolution of ultra-low NOx combustor design tools. Test results indicated that the RQL combustor emissions and performance at simulated supersonic cruise conditions were predominantly sensitive to the quick mixer subcomponent performance and not sensitive to fuel injector performance. Test results also indicated the mixing section configuration employing a single row of circular holes was the lowest NOx mixer tested probably due to the initial fast mixing characteristics of this mixing section. However, other quick mix orifice configurations such as the slanted slot mixer produced substantially lower levels of carbon monoxide emissions most likely due to the enhanced circumferential dispersion of the air addition. Test results also suggested that an optimum momentum-flux ratio exists for a given quick mix configuration. This would cause undesirable jet under- or over-penetration for test conditions with momentum-flux ratios below or above the optimum value. Tests conducted to assess the effect of quick mix flow area indicated that reduction in the quick mix flow area produced lower NOx emissions at reduced residence time, but this had no effect on NOx emissions measured at similar residence time for the configurations tested.
Out-of-autoclave manufacturing of a stiffened thermoplastic carbon fibre PEEK panel
NASA Astrophysics Data System (ADS)
Flanagan, M.; Goggins, J.; Doyle, A.; Weafer, B.; Ward, M.; Bizeul, M.; Canavan, R.; O'Bradaigh, C.; Doyle, K.; Harrison, N.
2017-10-01
Out-of-Autoclave manufacturing methods, specifically Automated Tape Placement (ATP) and induction welding, used in the fabrication of a stiffened thermoplastic demonstrator panel, are presented in this study. The demonstrator panel consists of two stiffeners induction welded to a flat skin, to form a typical load bearing aerospace sub-component. The skin of the panel is manufactured from uni-directional Carbon Fibre (CF) Polyetheretherkeytone (PEEK) using laser assisted Automated Tape Placement (ATP) and the stiffeners are press formed from woven CF-PEEK. The stiffeners are fusion bonded to the skin using a continuous induction welding process. A susceptor material is used at the interface to ensure the required heating is concentrated at the weldline. Microscopy was used to examine the manufactured coupons for defects. Destructive testing was carried out to evaluate the strength of the overall assembly. The work shows that assemblies manufactured using continuous induction welding and ATP are suitable for load bearing aerospace applications.
Nonmotor Symptoms in Parkinson Disease: A Descriptive Review on Social Cognition Ability.
Palmeri, Rosanna; Lo Buono, Viviana; Corallo, Francesco; Foti, Maria; Di Lorenzo, Giuseppe; Bramanti, Placido; Marino, Silvia
2017-03-01
Parkinson disease (PD) is a neurodegenerative disorder characterized by motor and nonmotor symptoms. Nonmotor symptoms include cognitive deficits and impairment in emotions recognition ability associated with loss of dopaminergic neurons in the substantia nigra and with alteration in frontostriatal circuits. In this review, we analyzed the studies on social cognition ability in patients with PD. We searched on PubMed and Web of Science databases and screening references of included studied and review articles for additional citations. From initial 260 articles, only 18 met search criteria. A total of 496 patients were compared with 514 health controls, through 16 different tests that assessed some subcomponents of social cognition, such as theory of mind, decision-making, and emotional face recognition. Studies on cognitive function in patients with PD have focused on executive function. Patients with PD showed impairment in social cognition from the earliest stages of disease. This ability seems to not be significantly associated with other cognitive functions.
Subvocal articulatory rehearsal during verbal working memory in multiple sclerosis.
Sweet, Lawrence H; Vanderhill, Susan D; Jerskey, Beth A; Gordon, Norman M; Paul, Robert H; Cohen, Ronald A
2010-10-01
This study was designed to examine verbal working memory (VWM) components among multiple sclerosis (MS) patients and determine the influence of information processing speed. Of two frequently studied VWM sub-components, subvocal rehearsal was expected to be more affected by MS than short-term memory buffering. Furthermore, worse subvocal rehearsal was predicted to be specifically related to slower cognitive processing. Fifteen MS patients were administered a neuropsychological battery assessing VWM, processing speed, mood, fatigue, and disability. Participants performed a 2-Back VWM task with modified nested conditions designed to increase subvocal rehearsal (via inter-stimulus interval) and short-term memory buffering demands (via phonological similarity). Performance during these 2-Back conditions did not significantly differ and both exhibited strong positive correlations with disability. However, only scores on the subvocal rehearsal 2-Back were significantly related to performance on the remaining test battery, including processing speed and depressive symptoms. Findings suggest that performance during increased subvocal rehearsal demands is specifically influenced by cognitive processing speed and depressive symptoms.
Neural components of topographical representation
Aguirre, Geoffrey K.; Zarahn, Eric; D’Esposito, Mark
1998-01-01
Studies of patients with focal brain damage suggest that topographical representation is subserved by dissociable neural subcomponents. This article offers a condensed review of the literature of “topographical disorientation” and describes several functional MRI studies designed to test hypotheses generated by that review. Three hypotheses are considered: (i) The parahippocampal cortex is critically involved in the acquisition of exocentric spatial information in humans; (ii) separable, posterior, dorsal, and ventral cortical regions subserve the perception and long term representation of position and identity, respectively, of landmarks; and (iii) there is a distinct area of the ventral occipitotemporal cortex that responds maximally to building stimuli and may play a role in the perception of salient landmarks. We conclude with a discussion of the inferential limitations of neuroimaging and lesion studies. It is proposed that combining these two approaches allows for inferences regarding the computational involvement of a neuroanatomical substrate in a given cognitive process although neither method can strictly support this conclusion alone. PMID:9448249
Recent progress in NASA Langley Research Center textile reinforced composites program
NASA Technical Reports Server (NTRS)
Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.
1992-01-01
Research was conducted to explore the benefits of textile reinforced composites for transport aircraft primary structures. The objective is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. Some program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. Textile 3-D weaving, 3-D braiding, and knitting and/or stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighted against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural parts are required to establish the potential of textile reinforced composite materials.
Generation of microfluidic flow using an optically assembled and magnetically driven microrotor
NASA Astrophysics Data System (ADS)
Köhler, J.; Ghadiri, R.; Ksouri, S. I.; Guo, Q.; Gurevich, E. L.; Ostendorf, A.
2014-12-01
The key components in microfluidic systems are micropumps, valves and mixers. Depending on the chosen technology, the realization of these microsystems often requires rotational and translational control of subcomponents. The manufacturing of such active components as well as the driving principle are still challenging tasks. A promising all-optical approach could be the combination of laser direct writing and actuation based on optical forces. However, when higher actuation velocities are required, optical driving might be too slow. Hence, a novel approach based on optical assembling of microfluidic structures and subsequent magnetic actuation is proposed. By applying the optical assembly of microspherical building blocks as the manufacturing method and magnetic actuation, a microrotor was successfully fabricated and tested within a microfluidic channel. The resulting fluid flow was characterized by introducing an optically levitated measuring probe particle. Finally, a freely moving tracer particle visualizes the generated flow. The tracer particle analysis shows average velocities of 0.4-0.5 µm s-1 achieved with the presented technology.
The Fitness Effects of Men's Family Investments : A Test of Three Pathways in a Single Population.
Winking, Jeffrey; Koster, Jeremy
2015-09-01
Men's investments in parenting and long-term reproductive relationships are a hallmark feature of human reproduction and life history. The uniqueness of such male involvement among catarrhines has driven an extensive debate surrounding the selective pressures that led to and maintain such capacities in men. Three major pathways have been proposed through which men's involvement might confer fitness benefits: enhancing child well-being, increasing couple fertility, and decreasing likelihood of partner desertion. Previous research has explored the impact of father involvement on these factors individually, but here we present novel research that explores all three pathways within the same population, the Mayangna/Miskito horticulturalists of Nicaragua. Furthermore, we expand the traditional dichotomous measure of father presence/absence by using a continuous measure of overall male investment, as well as two continuous measures of its subcomponents: direct care and wealth. We find that men's investments are associated with children's growth and possibly with wife's marital satisfaction; however, they are not associated with couple fertility.
Producibility aspects of advanced composites for an L-1011 Aileron
NASA Technical Reports Server (NTRS)
Van Hamersveld, J.; Fogg, L. D.
1976-01-01
The design of advanced composite aileron suitable for long-term service on transport aircraft includes Kevlar 49 fabric skins on honeycomb sandwich covers, hybrid graphite/Kevlar 49 ribs and spars, and graphite/epoxy fittings. Weight and cost savings of 28 and 20 percent, respectively, are predicted by comparison with the production metallic aileron. The structural integrity of the design has been substantiated by analysis and static tests of subcomponents. The producibility considerations played a key role in the selection of design concepts with potential for low-cost production. Simplicity in fabrication is a major factor in achieving low cost using advanced tooling and manufacturing methods such as net molding to size, draping, forming broadgoods, and cocuring components. A broadgoods dispensing machine capable of handling unidirectional and bidirectional prepreg materials in widths ranging from 12 to 42 inches is used for rapid layup of component kits and covers. Existing large autoclaves, platen presses, and shop facilities are fully exploited.
The space optical clocks project
NASA Astrophysics Data System (ADS)
Schiller, S.; Tino, G. M.; Lemonde, P.; Sterr, U.; Lisdat, Ch.; Görlitz, A.; Poli, N.; Nevsky, A.; Salomon, C.
2017-11-01
The Space Optical Clocks project aims at operating lattice clocks on the ISS for tests of fundamental physics and for providing high-accuracy comparisons of future terrestrial optical clocks. A pre-phase-A study (2007- 10), funded partially by ESA and DLR, included the implementation of several optical lattice clock systems using Strontium and Ytterbium as atomic species and their characterization. Subcomponents of clock demonstrators with the added specification of transportability and using techniques suitable for later space use, such as all-solid-state lasers, low power consumption, and compact dimensions, have been developed and have been validated. This included demonstration of laser-cooling and magneto-optical trapping of Sr atoms in a compact breadboard apparatus and demonstration of a transportable clock laser with 1 Hz linewidth. With two laboratory Sr lattice clock systems a number of fundamental results were obtained, such as observing atomic resonances with linewidths as low as 3 Hz, non-destructive detection of atom excitation, determination of decoherence effects and reaching a frequency instability of 1×10-16.
NASA Technical Reports Server (NTRS)
Gould, Kevin E.; Satyanarayana, Arunkumar; Bogert, Philip B.
2016-01-01
Analysis performed in this study substantiates the need for high fidelity vehicle level progressive damage analyses (PDA) structural models for use in the verification and validation of proposed sub-scale structural models and to support required full-scale vehicle level testing. PDA results are presented that capture and correlate the responses of sub-scale 3-stringer and 7-stringer panel models and an idealized 8-ft diameter fuselage model, which provides a vehicle level environment for the 7-stringer sub-scale panel model. Two unique skin-stringer attachment assumptions are considered and correlated in the models analyzed: the TIE constraint interface versus the cohesive element (COH3D8) interface. Evaluating different interfaces allows for assessing a range of predicted damage modes, including delamination and crack propagation responses. Damage models considered in this study are the ABAQUS built-in Hashin procedure and the COmplete STress Reduction (COSTR) damage procedure implemented through a VUMAT user subroutine using the ABAQUS/Explicit code.
Distributed Engine Control Empirical/Analytical Verification Tools
NASA Technical Reports Server (NTRS)
DeCastro, Jonathan; Hettler, Eric; Yedavalli, Rama; Mitra, Sayan
2013-01-01
NASA's vision for an intelligent engine will be realized with the development of a truly distributed control system featuring highly reliable, modular, and dependable components capable of both surviving the harsh engine operating environment and decentralized functionality. A set of control system verification tools was developed and applied to a C-MAPSS40K engine model, and metrics were established to assess the stability and performance of these control systems on the same platform. A software tool was developed that allows designers to assemble easily a distributed control system in software and immediately assess the overall impacts of the system on the target (simulated) platform, allowing control system designers to converge rapidly on acceptable architectures with consideration to all required hardware elements. The software developed in this program will be installed on a distributed hardware-in-the-loop (DHIL) simulation tool to assist NASA and the Distributed Engine Control Working Group (DECWG) in integrating DCS (distributed engine control systems) components onto existing and next-generation engines.The distributed engine control simulator blockset for MATLAB/Simulink and hardware simulator provides the capability to simulate virtual subcomponents, as well as swap actual subcomponents for hardware-in-the-loop (HIL) analysis. Subcomponents can be the communication network, smart sensor or actuator nodes, or a centralized control system. The distributed engine control blockset for MATLAB/Simulink is a software development tool. The software includes an engine simulation, a communication network simulation, control algorithms, and analysis algorithms set up in a modular environment for rapid simulation of different network architectures; the hardware consists of an embedded device running parts of the CMAPSS engine simulator and controlled through Simulink. The distributed engine control simulation, evaluation, and analysis technology provides unique capabilities to study the effects of a given change to the control system in the context of the distributed paradigm. The simulation tool can support treatment of all components within the control system, both virtual and real; these include communication data network, smart sensor and actuator nodes, centralized control system (FADEC full authority digital engine control), and the aircraft engine itself. The DECsim tool can allow simulation-based prototyping of control laws, control architectures, and decentralization strategies before hardware is integrated into the system. With the configuration specified, the simulator allows a variety of key factors to be systematically assessed. Such factors include control system performance, reliability, weight, and bandwidth utilization.
Altruistic traits are predicted by neural responses to monetary outcomes for self vs charity
San Martín, René; Kwak, Youngbin; Pearson, John M.; Woldorff, Marty G.
2016-01-01
Human altruism is often expressed through charitable donation—supporting a cause that benefits others in society, at cost to oneself. The underlying mechanisms of this other-regarding behavior remain imperfectly understood. By recording event-related-potential (ERP) measures of brain activity from human participants during a social gambling task, we identified markers of differential responses to receipt of monetary outcomes for oneself vs for a charitable cause. We focused our ERP analyses on the frontocentral feedback-related negativity (FRN) and three subcomponents of the attention-related P300 (P3) brain wave: the frontocentral P2 and P3a and the parietal P3b. The FRN distinguished between gains and losses for both self and charity outcomes. Importantly, this effect of outcome valence was greater for self than charity for both groups and was independent of two altruism-related measures: participants’ pre-declared intended donations and the actual donations resulting from their choices. In contrast, differences in P3 subcomponents for outcomes for self vs charity strongly predicted both of our laboratory measures of altruism—as well as self-reported engagement in real-life altruistic behaviors. These results indicate that individual differences in altruism are linked to individual differences in the relative deployment of attention (as indexed by the P3) toward outcomes affecting other people. PMID:27030510
The effect of conscious intention to act on the Bereitschaftspotential.
Takashima, Shiro; Cravo, André M; Sameshima, Koichi; Ramos, Renato T
2018-06-02
The current study investigated the effect of conscious intention to act on the Bereitschaftspotential. Situations in which the awareness of acting is minimally expressed were generated by asking 16 participants to press a button after performing a mental imagery task based on animal pictures (automatic condition). The affective responses induced by the pictures were controlled by selecting the animals according to different valences, threatening and neutral. The Bereitschaftspotential associated with the button presses was compared to the observed when similar movements were performed under the basic instructions of the self-paced movement paradigm (willed condition). Enhanced Bereitschaftspotential amplitudes were observed in the willed condition with respect to the automatic condition. This effect was manifested as a negative slope at medial frontocentral sites during the last 500 ms before movement onset. The valence of the pictures did not affect the motor preparatory potentials. The results suggest that significant part of the NS' subcomponent of the readiness potential is associated with the attention to-and, presumably, awareness of-intention to move, possibly reflecting cortical activation from supplementary motor areas. Secondarily, our findings supports that the feeling of threat does not influence the Bereitschaftspotential associated with automatic movements. Regarding methodological issues, the behavioural model of spontaneous voluntary movements proposed in automatic condition can benefit investigations on purely motor (or non-cognitive) subcomponents of the Bereitschaftspotential.
Designed to Fail: A Novel Mode of Collagen Fibril Disruption and Its Relevance to Tissue Toughness
Veres, Samuel P.; Lee, J. Michael
2012-01-01
Collagen fibrils are nanostructured biological cables essential to the structural integrity of many of our tissues. Consequently, understanding the structural basis of their robust mechanical properties is of great interest. Here we present what to our knowledge is a novel mode of collagen fibril disruption that provides new insights into both the structure and mechanics of native collagen fibrils. Using enzyme probes for denatured collagen and scanning electron microscopy, we show that mechanically overloading collagen fibrils from bovine tail tendons causes them to undergo a sequential, two-stage, selective molecular failure process. Denatured collagen molecules—meaning molecules with a reduced degree of time-averaged helicity compared to those packed in undamaged fibrils—were first created within kinks that developed at discrete, repeating locations along the length of fibrils. There, collagen denaturation within the kinks was concentrated within certain subfibrils. Additional denatured molecules were then created along the surface of some disrupted fibrils. The heterogeneity of the disruption within fibrils suggests that either mechanical load is not carried equally by a fibril's subcomponents or that the subcomponents do not possess homogenous mechanical properties. Meanwhile, the creation of denatured collagen molecules, which necessarily involves the energy intensive breaking of intramolecular hydrogen bonds, provides a physical basis for the toughness of collagen fibrils. PMID:22735538
Constituents and functional implications of the rat default mode network.
Hsu, Li-Ming; Liang, Xia; Gu, Hong; Brynildsen, Julia K; Stark, Jennifer A; Ash, Jessica A; Lin, Ching-Po; Lu, Hanbing; Rapp, Peter R; Stein, Elliot A; Yang, Yihong
2016-08-02
The default mode network (DMN) has been suggested to support a variety of self-referential functions in humans and has been fractionated into subsystems based on distinct responses to cognitive tasks and functional connectivity architecture. Such subsystems are thought to reflect functional hierarchy and segregation within the network. Because preclinical models can inform translational studies of neuropsychiatric disorders, partitioning of the DMN in nonhuman species, which has previously not been reported, may inform both physiology and pathophysiology of the human DMN. In this study, we sought to identify constituents of the rat DMN using resting-state functional MRI (rs-fMRI) and diffusion tensor imaging. After identifying DMN using a group-level independent-component analysis on the rs-fMRI data, modularity analyses fractionated the DMN into an anterior and a posterior subsystem, which were further segregated into five modules. Diffusion tensor imaging tractography demonstrates a close relationship between fiber density and the functional connectivity between DMN regions, and provides anatomical evidence to support the detected DMN subsystems. Finally, distinct modulation was seen within and between these DMN subcomponents using a neurocognitive aging model. Taken together, these results suggest that, like the human DMN, the rat DMN can be partitioned into several subcomponents that may support distinct functions. These data encourage further investigation into the neurobiological mechanisms of DMN processing in preclinical models of both normal and disease states.
Pinket, An-Sofie; De Craemer, Marieke; Huybrechts, Inge; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Cardon, Greet; Androutsos, Odysseas; Koletzko, Berthold; Moreno, Luis A.; Socha, Piotr; Iotova, Violeta; Manios, Yannis; Van Lippevelde, Wendy
2017-01-01
The present study aimed to examine whether a multibehavioural intervention with a focus on specific energy balance-related behaviours can affect total diet quality and its four subcomponents in European preschoolers and to investigate if these intervention effects differed by socioeconomic status (SES). Parents/caregivers of 3.5 to 5.5 year-olds (n = 4968) recruited through kindergartens in six European countries within the ToyBox-study completed questionnaires on socio-demographics and a food frequency questionnaire on their preschoolers’ diet. To assess intervention effects and differences by SES, multilevel repeated measures analyses were conducted. In contrast to no significant difference in total diet quality, in both the intervention and control group, the dietary quality and dietary equilibrium increased, with a larger increase in the intervention group (mean difference quality: +3.4%; mean difference equilibrium: +0.9%) compared to the control group (quality: +1.5%; equilibrium: +0.2%). SES was not a significant moderator for intervention effects on total diet quality, nor for the four subcomponents. This study indicates that multibehavioural interventions with a focus on specific energy balance-related behaviours in preschoolers not only affect those targeted behaviours, but can also have more generalized effects. The ToyBox-intervention effects were similar for both lower and high SES preschoolers. PMID:28489048
Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J
2016-01-01
Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.
Lillis, Jason; Graham Thomas, J; Seng, Elizabeth K; Lipton, Richard B; Pavlović, Jelena M; Rathier, Lucille; Roth, Julie; O'Leary, Kevin C; Bond, Dale S
2017-05-01
Pain acceptance involves willingness to experience pain and engaging in valued activities while pain is present. Though pain acceptance could limit both headache-related disability and pain interference in individuals with migraine, few studies have addressed this issue. This study evaluated whether higher levels of total pain acceptance and its two subcomponents, pain willingness and activity engagement, were associated with lower levels of headache-related impairment in women who had both migraine and overweight/obesity. In this cross-sectional study, participants seeking weight loss and headache relief in the Women's Health and Migraine trial completed baseline measures of pain acceptance (Chronic Pain Acceptance Questionnaire [CPAQ]), headache-related disability (Headache Impact Test-6), and pain interference (Brief Pain Inventory). Migraine headache frequency and pain intensity were assessed daily via smartphone diary. Using CPAQ total and subcomponent (pain willingness and activity engagement) scores, headache frequency, pain intensity, and body mass index (BMI) as predictors in linear regression, headache-related disability, and pain interference were modeled as outcomes. On average, participants (n = 126; age = 38.5 ± 8.2 years; BMI = 35.3 ± 6.6 kg/m 2 ) reported 8.4 ± 4.7 migraine days/month and pain intensity of 6.0 ± 1.5 on a 0-10 scale on headache days. After correcting for multiple comparisons (adjusted α = .008), pain willingness was independently associated with both lower headache-related disability (P < .001; β = -0.233) and pain interference (P < .001; β = -0.261). Activity engagement was not associated with headache-related disability (P = .128; β = -0.138) and pain interference (P = .042; β = -0.154). CPAQ total score was not associated with headache-related disability (P = .439; β = 0.066) and pain interference (P = .305; β = 0.074). Pain intensity was significantly associated with outcomes in all analyses (Ps < .001; βs 0.343-0.615). Higher pain willingness, independent of degree of both migraine severity and overweight, is associated with lower headache-related disability and general pain interference in treatment-seeking women with migraine and overweight/obesity. Future studies are needed to clarify direction of causality and test whether strategies designed to help women increase pain willingness, or relinquish ineffective efforts to control pain, can improve functional outcomes in women who have migraine and overweight/obesity. © 2017 American Headache Society.
FDMA/TDM satellite communication systems for domestic/business services
NASA Astrophysics Data System (ADS)
Perrotta, G.; Losquadro, G.; Giubilei, R.
A design concept is presented for a Ka-band satellite communication system for domestic business applications, based on FDMA uplinks and time-domain-multiplexed (TDM) downlinks. The single-hop modular-design regenerative/processing repeaters employed are capable of handling up to 16 2-Mb/s uplink carriers each. The internal (short-block) and external (Reed-Solomon) coding techniques, frequency relations and symbol synchronization, and optional mini-TDMA implementation are explained, and the results of numerical simulations of subcomponent performance are presented graphically.
Cytoskeletal dynamics in fission yeast: a review of models for polarization and division
Drake, Tyler; Vavylonis, Dimitrios
2010-01-01
We review modeling studies concerning cytoskeletal activity of fission yeast. Recent models vary in length and time scales, describing a range of phenomena from cellular morphogenesis to polymer assembly. The components of cytoskeleton act in concert to mediate cell-scale events and interactions such as polarization. The mathematical models reduce these events and interactions to their essential ingredients, describing the cytoskeleton by its bulk properties. On a smaller scale, models describe cytoskeletal subcomponents and how bulk properties emerge. PMID:21119765
DOE Office of Scientific and Technical Information (OSTI.GOV)
The Benchmarks of Global Clean Energy Manufacturing will help policymakers and industry gain deeper understanding of global manufacturing of clean energy technologies. Increased knowledge of the product supply chains can inform decisions related to manufacturing facilities for extracting and processing raw materials, making the array of required subcomponents, and assembling and shipping the final product. This brochure summarized key findings from the analysis and includes important figures from the report. The report was prepared by the Clean Energy Manufacturing Analysis Center (CEMAC) analysts at the U.S. Department of Energy's National Renewable Energy Laboratory.
2011-06-01
CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ...20319 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR...its subcomponents execute their mission by performing research and analysis, publication, conferences, policy support, and outreach. The mission of
2013-12-01
Attention Deficit / Hyperactivity Disorder Symptom Score 20. Parental Marital Status – Parents Divorced 21. Home Until Enlisted 22. High School...FL, 2012; pp 86–96. Rice, V. J. B.; Butler, J.; Marra, D. Neuro-Cognitive Assessment, Symptoms of Attention Deficit and Hyperactivity Disorder , and...V. J.; Butler, J.; Marra, D. The Relationship Between Symptoms of Attention Deficit and Hyperactivity Disorder and Oppositional Defiant Disorder
Motivations for play in online games.
Yee, Nick
2006-12-01
An empirical model of player motivations in online games provides the foundation to understand and assess how players differ from one another and how motivations of play relate to age, gender, usage patterns, and in-game behaviors. In the current study, a factor analytic approach was used to create an empirical model of player motivations. The analysis revealed 10 motivation subcomponents that grouped into three overarching components (achievement, social, and immersion). Relationships between motivations and demographic variables (age, gender, and usage patterns) are also presented.
A systematic review of cognitive performance in patients with childhood craniopharyngioma.
Özyurt, Jale; Müller, Hermann L; Thiel, Christiane M
2015-10-01
Craniopharyngiomas are rare brain tumors of the sellar/suprasellar region, often adversely affecting patients' physical and psychosocial functioning. Until a few years ago, knowledge on cognitive deficits in craniopharyngioma patients was based on little valid evidence, with considerable inconsistencies across studies. Findings from recent research, with partly larger sample sizes, add to existing evidence to provide a more clear and reliable picture. The current review aims to summarize and systemize current findings on cognitive deficits in childhood craniopharyngioma, taking account of patient- and treatment-related variables where possible. Those studies were included that reported results of childhood craniopharyngioma patients tested with formalized neuropsychological tests (irrespective of their age at study, group size ≥10). A systematic assignment of test results to subcomponents of broader cognitive domains (e.g. to specific memory systems and processes) allows for a first comprehensive overview of patterns of spared and impaired cognitive functions. We show that episodic memory recall in particular is impaired, largely sparing other memory components. In accordance with recent knowledge on mammillary function, patients with hypothalamic involvement appear to be at particular risk. Deficits in higher cognitive processes, relying on the integrity of the prefrontal cortex and its subcortical pathways, may also occur, but results are still inconsistent. To gain deeper insight into the pattern of deficits and their association with patient- and treatment-related variables, further multi-site research with larger cohorts is needed.
Fatigue and durability of Nitinol stents.
Pelton, A R; Schroeder, V; Mitchell, M R; Gong, Xiao-Yan; Barney, M; Robertson, S W
2008-04-01
Nitinol self-expanding stents are effective in treating peripheral artery disease, including the superficial femoral, carotid, and renal arteries. However, fracture occurrences of up to 50% have been reported in some stents after one year. These stent fractures are likely due to in vivo cyclic displacements. As such, the cyclic fatigue and durability properties of Nitinol-based endovascular stents are discussed in terms of an engineering-based experimental testing program. In this paper, the combined effects of cardiac pulsatile fatigue and stent-vessel oversizing are evaluated for application to both stents and stent subcomponents. In particular, displacement-controlled fatigue tests were performed on stent-like specimens processed from Nitinol microtubing. Fatigue data were collected with combinations of simulated oversizing conditions and pulsatile cycles that were identified by computer modeling of the stent that mimic in vivo deformation conditions. These data are analyzed with non-linear finite element computations and are illustrated with strain-life and strain-based constant-life diagrams. The utility of this approach is demonstrated in conjunction with 10 million cycle pulsatile fatigue tests of Cordis SMART Control((R)) Nitinol self-expanding stents to calculate fatigue safety factors and thereby predict in vivo fatigue resistance. These results demonstrate the non-linear constant fatigue-life response of Nitinol stents, whereby, contrary to conventional engineering materials, the fatigue life of Nitinol is observed to increase with increasing mean strain.
Delamination Assessment Tool for Spacecraft Composite Structures
NASA Astrophysics Data System (ADS)
Portela, Pedro; Preller, Fabian; Wittke, Henrik; Sinnema, Gerben; Camanho, Pedro; Turon, Albert
2012-07-01
Fortunately only few cases are known where failure of spacecraft structures due to undetected damage has resulted in a loss of spacecraft and launcher mission. However, several problems related to damage tolerance and in particular delamination of composite materials have been encountered during structure development of various ESA projects and qualification testing. To avoid such costly failures during development, launch or service of spacecraft, launcher and reusable launch vehicles structures a comprehensive damage tolerance verification approach is needed. In 2009, the European Space Agency (ESA) initiated an activity called “Delamination Assessment Tool” which is led by the Portuguese company HPS Lda and includes academic and industrial partners. The goal of this study is the development of a comprehensive damage tolerance verification approach for launcher and reusable launch vehicles (RLV) structures, addressing analytical and numerical methodologies, material-, subcomponent- and component testing, as well as non-destructive inspection. The study includes a comprehensive review of current industrial damage tolerance practice resulting from ECSS and NASA standards, the development of new Best Practice Guidelines for analysis, test and inspection methods and the validation of these with a real industrial case study. The paper describes the main findings of this activity so far and presents a first iteration of a Damage Tolerance Verification Approach, which includes the introduction of novel analytical and numerical tools at an industrial level. This new approach is being put to the test using real industrial case studies provided by the industrial partners, MT Aerospace, RUAG Space and INVENT GmbH
Altruistic traits are predicted by neural responses to monetary outcomes for self vs charity.
San Martín, René; Kwak, Youngbin; Pearson, John M; Woldorff, Marty G; Huettel, Scott A
2016-06-01
Human altruism is often expressed through charitable donation-supporting a cause that benefits others in society, at cost to oneself. The underlying mechanisms of this other-regarding behavior remain imperfectly understood. By recording event-related-potential (ERP) measures of brain activity from human participants during a social gambling task, we identified markers of differential responses to receipt of monetary outcomes for oneself vs for a charitable cause. We focused our ERP analyses on the frontocentral feedback-related negativity (FRN) and three subcomponents of the attention-related P300 (P3) brain wave: the frontocentral P2 and P3a and the parietal P3b. The FRN distinguished between gains and losses for both self and charity outcomes. Importantly, this effect of outcome valence was greater for self than charity for both groups and was independent of two altruism-related measures: participants' pre-declared intended donations and the actual donations resulting from their choices. In contrast, differences in P3 subcomponents for outcomes for self vs charity strongly predicted both of our laboratory measures of altruism-as well as self-reported engagement in real-life altruistic behaviors. These results indicate that individual differences in altruism are linked to individual differences in the relative deployment of attention (as indexed by the P3) toward outcomes affecting other people. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.
Modal Substructuring of Geometrically Nonlinear Finite Element Models with Interface Reduction
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kuether, Robert J.; Allen, Matthew S.; Hollkamp, Joseph J.
Substructuring methods have been widely used in structural dynamics to divide large, complicated finite element models into smaller substructures. For linear systems, many methods have been developed to reduce the subcomponents down to a low order set of equations using a special set of component modes, and these are then assembled to approximate the dynamics of a large scale model. In this paper, a substructuring approach is developed for coupling geometrically nonlinear structures, where each subcomponent is drastically reduced to a low order set of nonlinear equations using a truncated set of fixedinterface and characteristic constraint modes. The method usedmore » to extract the coefficients of the nonlinear reduced order model (NLROM) is non-intrusive in that it does not require any modification to the commercial FEA code, but computes the NLROM from the results of several nonlinear static analyses. The NLROMs are then assembled to approximate the nonlinear differential equations of the global assembly. The method is demonstrated on the coupling of two geometrically nonlinear plates with simple supports at all edges. The plates are joined at a continuous interface through the rotational degrees-of-freedom (DOF), and the nonlinear normal modes (NNMs) of the assembled equations are computed to validate the models. The proposed substructuring approach reduces a 12,861 DOF nonlinear finite element model down to only 23 DOF, while still accurately reproducing the first three NNMs of the full order model.« less
Modal Substructuring of Geometrically Nonlinear Finite Element Models with Interface Reduction
Kuether, Robert J.; Allen, Matthew S.; Hollkamp, Joseph J.
2017-03-29
Substructuring methods have been widely used in structural dynamics to divide large, complicated finite element models into smaller substructures. For linear systems, many methods have been developed to reduce the subcomponents down to a low order set of equations using a special set of component modes, and these are then assembled to approximate the dynamics of a large scale model. In this paper, a substructuring approach is developed for coupling geometrically nonlinear structures, where each subcomponent is drastically reduced to a low order set of nonlinear equations using a truncated set of fixedinterface and characteristic constraint modes. The method usedmore » to extract the coefficients of the nonlinear reduced order model (NLROM) is non-intrusive in that it does not require any modification to the commercial FEA code, but computes the NLROM from the results of several nonlinear static analyses. The NLROMs are then assembled to approximate the nonlinear differential equations of the global assembly. The method is demonstrated on the coupling of two geometrically nonlinear plates with simple supports at all edges. The plates are joined at a continuous interface through the rotational degrees-of-freedom (DOF), and the nonlinear normal modes (NNMs) of the assembled equations are computed to validate the models. The proposed substructuring approach reduces a 12,861 DOF nonlinear finite element model down to only 23 DOF, while still accurately reproducing the first three NNMs of the full order model.« less
On the Origin of Complex Adaptive Traits: Progress Since the Darwin Versus Mivart Debate.
Suzuki, Takao K
2017-06-01
The evolutionary origin of complex adaptive traits has been a controversial topic in the history of evolutionary biology. Although Darwin argued for the gradual origins of complex adaptive traits within the theory of natural selection, Mivart insisted that natural selection could not account for the incipient stages of complex traits. The debate starting from Darwin and Mivart eventually engendered two opposite views: gradualism and saltationism. Although this has been a long-standing debate, the issue remains unresolved. However, recent studies have interrogated classic examples of complex traits, such as the asymmetrical eyes of flatfishes and leaf mimicry of butterfly wings, whose origins were debated by Darwin and Mivart. Here, I review recent findings as a starting point to provide a modern picture of the evolution of complex adaptive traits. First, I summarize the empirical evidence that unveils the evolutionary steps toward complex traits. I then argue that the evolution of complex traits could be understood within the concept of "reducible complexity." Through these discussions, I propose a conceptual framework for the formation of complex traits, named as reducible-composable multicomponent systems, that satisfy two major characteristics: reducibility into a sum of subcomponents and composability to construct traits from various additional and combinatorial arrangements of the subcomponents. This conceptual framework provides an analytical foundation for exploring evolutionary pathways to build up complex traits. This review provides certain essential avenues for deciphering the origin of complex adaptive traits. © 2017 Wiley Periodicals, Inc.
Multifunctional nanoparticles for drug/gene delivery in nanomedicine
NASA Astrophysics Data System (ADS)
Seale, Mary-Margaret; Zemlyanov, Dimitry; Cooper, Christy L.; Haglund, Emily; Prow, Tarl W.; Reece, Lisa M.; Leary, James F.
2007-02-01
Multifunctional nanoparticles hold great promise for drug/gene delivery. Multilayered nanoparticles can act as nanomedical systems with on-board "molecular programming" to accomplish complex multi-step tasks. For example, the targeting process has only begun when the nanosystem has found the correct diseased cell of interest. Then it must pass the cell membrane and avoid enzymatic destruction within the endosomes of the cell. Since the nanosystem is only about one millionth the volume of a human cell, for it to have therapeutic efficacy with its contained package, it must deliver that drug or gene to the appropriate site within the living cell. The successive de-layering of these nanosystems in a controlled fashion allows the system to accomplish operations that would be difficult or impossible to do with even complex single molecules. In addition, portions of the nanosystem may be protected from premature degradation or mistargeting to non-diseased cells. All of these problems remain major obstacles to successful drug delivery with a minimum of deleterious side effects to the patient. This paper describes some of the many components involved in the design of a general platform technology for nanomedical systems. The feasibility of most of these components has been demonstrated by our group and others. But the integration of these interacting sub-components remains a challenge. We highlight four components of this process as examples. Each subcomponent has its own sublevels of complexity. But good nanomedical systems have to be designed/engineered as a full nanomedical system, recognizing the need for the other components.
Auerbach, Marc; Roney, Linda; Aysseh, April; Gawel, Marcie; Koziel, Jeannette; Barre, Kimberly; Caty, Michael G; Santucci, Karen
2014-12-01
This study aimed to evaluate the feasibility and measure the impact of an in situ interdisciplinary pediatric trauma quality improvement simulation program. Twenty-two monthly simulations were conducted in a tertiary care pediatric emergency department with the aim of improving the quality of pediatric trauma (February 2010 to November 2012). Each session included 20 minutes of simulated patient care, followed by 30 minutes of debriefing that focused on teamwork, communication, and the identification of gaps in care. A single rater scored the performance of the team in real time using a validated assessment instrument for 6 subcomponents of care (teamwork, airway, intubation, breathing, circulation, and disability). Participants completed a survey and written feedback forms. A trend analysis of the 22 simulations found statistically significant positive trends for overall performance, teamwork, and intubation subcomponents; the strength of the upward trend was the strongest for the teamwork (τ = 0.512), followed by overall performance (τ = 0.488) and intubation (τ = 0.433). Two hundred fifty-one of 398 participants completed the participant feedback form (response rate, 63%), reporting that debriefing was the most valuable aspect of the simulation. An in situ interdisciplinary pediatric trauma simulation quality improvement program resulted in improved validated trauma simulation assessment scores for overall performance, teamwork, and intubation. Participants reported high levels of satisfaction with the program, and debriefing was reported as the most valuable component of the program.
Ouro-Koura, Abdou-Rahim; Sopoh, Emmanuel Ghislain; Sossa, Jerôme Charles; Glèlè-Ahanhanzo, Yolaine; Agueh, Victoire; Ouendo, Edgard-Marius; Ouedraogo, Laurent
2018-01-01
This study aimed to evaluate the performance of the logistics management system (LMS) of malaria control (MC) resources in the Littoral Department, Benin, in 2017. In June 2017, we conducted a cross-sectional evaluative study focusing on the structures for the storage and the disposal of MC resources as well as on staff involved in their management. The performance of the the logistics management system was evaluated on the basis of the observed compliance of the components and sub-components of the "Structure", the "Process" and the "Results" with the norms and standards defined by the Ministry of Health. A total of 36 structures were investigated and secondary target was surveyed. It followed that 52,78% of the structures for the storage and the disposal of MC resources met the requirements for resources storage while only 33.33% of MC resources management staff were trained in logistics management. The performance of the logistics management system of MC resources was inadequate (compliance 59,13 % compared to the expected score). The structure, as well as the process were non-compliant with the standards ( 60,20% and 73.22% compared to the expected score respectively), leading to negative results (41.53% compared to the expected score). The most inadequate sub-component was the logistics management information system (LMIS). This study highlights the role of LMS for better performance of MC resources management. Particular attention should be given to this component.
Aging of theory of mind: the influence of educational level and cognitive processing.
Li, Xiaoming; Wang, Kai; Wang, Fan; Tao, Qian; Xie, Yu; Cheng, Qi
2013-01-01
Previous studies of theory of mind (ToM) in old age have provided mixed results. We predicted that educational level and cognitive processing are two factors influencing the pattern of the aging of ToM. To test this hypothesis, a younger group who received higher education (mean age 20.46 years), an older group with an education level equal to that of the young group (mean age 76.29 years), and an older group with less education (mean age 73.52 years) were recruited. ToM tasks included the following tests: the second-order false-belief task, the faux-pas task, the eyes test, and tests of fundamental aspects of cognitive function that included two background tests (memory span and processing speed) and three subcomponents of executive function (inhibition, updating, and shifting). We found that the younger group and the older group with equally high education outperformed the older group with less education in false-belief and faux-pas tasks. However, there was no significant difference between the two former groups. The three groups of participants performed equivalently in the eyes test as well as in control tasks (false-belief control question, faux-pas control question, faux-pas control story, and Eyes Test control task). The younger group outperformed the other two groups in the cognitive processing tasks. Mediation analyses showed that difficulties in inhibition, memory span, and processing speed mediated the age differences in false-belief reasoning. Also, the variables of inhibition, updating, memory span, and processing speed mediated age-related variance in faux-pas. Discussion focused on the links between ToM aging, educational level, and cognitive processing. Supported by Chinese National Natural Science Foundation (number: 30870766) and Anhui Province Natural Science Foundation (number: 11040606M166).
Formulation of an experimental substructure model using a Craig-Bampton based transmission simulator
NASA Astrophysics Data System (ADS)
Kammer, Daniel C.; Allen, Mathew S.; Mayes, Randy L.
2015-12-01
Experimental-analytical substructuring is attractive when there is motivation to replace one or more system subcomponents with an experimental model. This experimentally derived substructure can then be coupled to finite element models of the rest of the structure to predict the system response. The transmission simulator method couples a fixture to the component of interest during a vibration test in order to improve the experimental model for the component. The transmission simulator is then subtracted from the tested system to produce the experimental component. The method reduces ill-conditioning by imposing a least squares fit of constraints between substructure modal coordinates to connect substructures, instead of directly connecting physical interface degrees of freedom. This paper presents an alternative means of deriving the experimental substructure model, in which a Craig-Bampton representation of the transmission simulator is created and subtracted from the experimental measurements. The corresponding modal basis of the transmission simulator is described by the fixed-interface modes, rather than free modes that were used in the original approach. These modes do a better job of representing the shape of the transmission simulator as it responds within the experimental system, leading to more accurate results using fewer modes. The new approach is demonstrated using a simple finite element model based example with a redundant interface.
NEID Port Adapter: Design and Verification Plan
NASA Astrophysics Data System (ADS)
Logsdon, Sarah E.; McElwain, Michael; McElwain, Michael W.; Gong, Qian; Bender, Chad; Halverson, Samuel; Hearty, Fred; Hunting, Emily; Jaehnig, Kurt; Liang, Ming; Mahadevan, Suvrath; Monson, A. J.; Percival, Jeffrey; Rajagopal, Jayadev; Ramsey, Lawrence; Roy, Arpita; Santoro, Fernando; Schwab, Christian; Smith, Michael; Wolf, Marsha; Wright, Jason
2018-01-01
The NEID spectrograph is an optical (380-930 nm), fiber-fed, precision Doppler spectrograph currently in development for the 3.5 m WIYN Telescope at Kitt Peak National Observatory. Designed to achieve a radial velocity precision of <30 cm/s, NEID will be sensitive enough to detect terrestrial-mass exoplanets around low-mass stars. Light from the target stars is focused by the telescope to a bent-Cassegrain port at the edge of the primary mirror mechanical support. The specialized NEID “Port Adapter” system is mounted at this bent-Cassegrain port and is responsible for delivering the incident light from the telescope to the NEID fibers. In order to provide stable, high-quality images to the science instrument, the Port Adapter houses several subcomponents designed to acquire the target stars, correct for atmospheric dispersion, stabilize the light onto the science fibers, and calibrate the spectrograph by injecting known wavelength sources such as a laser frequency comb. Here we describe the overall design of the Port Adapter and outline the development of calibration tools and an on-sky test plan to verify the performance of the atmospheric dispersion corrector (ADC). We also discuss the development of an error budget and test requirements to ensure high-precision centroiding onto the NEID science fibers using a system of coherent fiber bundles.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zawisza, I; Ren, L; Yin, F
Purpose: Respiratory-gated radiotherapy and dynamic tracking employ real-time imaging and surrogate motion-monitoring methods with tumor motion prediction in advance of real-time. This study investigated respiratory motion data length on prediction accuracy of tumor motion. Methods: Predictions generated from the algorithm are validated against a one-dimensional surrogate signal of amplitude versus time. Prediction consists of three major components: extracting top-ranked subcomponents from training data matching the last respiratory cycle; calculating weighting factors from best-matched subcomponents; fusing data proceeding best-matched subcomponents with respective weighting factors to form predictions. Predictions for one respiratory cycle (∼3-6seconds) were assessed using 351 patient data from themore » respiratory management device. Performance was evaluated for correlation coefficient and root mean square error (RMSE) between prediction and final respiratory cycle. Results: Respiratory prediction results fell into two classes, where best predictions for 70 cycles or less performed using relative prediction and greater than 70 cycles are predicted similarly using relative and derivative relative. For 70 respiratory cycles or less, the average correlation between prediction and final respiratory cycle was 0.9999±0.0001, 0.9999±0.0001, 0.9988±0.0003, 0.9985±0.0023, and 0.9981±0.0023 with RMSE values of 0.0091±0.0030, 0.0091±0.0030, 0.0305±0.0051, 0.0299±0.0259, and 0.0299±0.0259 for equal, relative, pattern, derivative equal and derivative relative weighting methods, respectively. Respectively, the total best prediction for each method was 37, 65, 20, 22, and 22. For data with greater than 70 cycles average correlation was 0.9999±0.0001, 0.9999±0.0001, 0.9988±0.0004, 0.9988±0.0020, and 0.9988±0.0020 with RMSE values of 0.0081±0.0031, 0.0082±0.0033, 0.0306±0.0056, 0.0218±0.0222, and 0.0218±0.0222 for equal, relative, pattern, derivative equal and derivative relative weighting methods, respectively. Respectively, the total best prediction for each method was 24, 44, 42, 30, and 45. Conclusion: The prediction algorithms are effective in estimating surrogate motion in advance. These results indicate an advantage in using relative prediction for shorter data and either relative or derivative relative prediction for longer data.« less
Status of the NectarCAM camera project
NASA Astrophysics Data System (ADS)
Glicenstein, J.-F.; Barcelo, M.; Barrio, J.-A.; Blanch, O.; Boix, J.; Bolmont, J.; Boutonnet, C.; Brun, P.; Chabanne, E.; Champion, C.; Colonges, S.; Corona, P.; Courty, B.; Delagnes, E.; Delgado, C.; Diaz, C.; Ernenwein, J.-P.; Fegan, S.; Ferreira, O.; Fesquet, M.; Fontaine, G.; Fouque, N.; Henault, F.; Gascón, D.; Giebels, B.; Herranz, D.; Hermel, R.; Hoffmann, D.; Horan, D.; Houles, J.; Jean, P.; Karkar, S.; Knödlseder, J.; Martinez, G.; Lamanna, G.; LeFlour, T.; Lévêque, A.; Lopez-Coto, R.; Louis, F.; Moudden, Y.; Moulin, E.; Nayman, P.; Nunio, F.; Olive, J.-F.; Panazol, J.-L.; Pavy, S.; Petrucci, P.-O.; Punch, M.; Prast, Julie; Ramon, P.; Rateau, S.; Ribó, M.; Rosier-Lees, S.; Sanuy, A.; Sizun, P.; Sieiro, J.; Sulanke, K.-H.; Tavernet, J.-P.; Tejedor, L. A.; Toussenel, F.; Vasileiadis, G.; Voisin, V.; Waegebert, V.; Zurbach, C.
2014-07-01
NectarCAM is a camera designed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range 100 GeV to 30 TeV. It has a modular design based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 7 to 8 degrees. Each module includes the photomultiplier bases, High Voltage supply, pre-amplifier, trigger, readout and Thernet transceiver. Events recorded last between a few nanoseconds and tens of nanoseconds. A flexible trigger scheme allows to read out very long events. NectarCAM can sustain a data rate of 10 kHz. The camera concept, the design and tests of the various subcomponents and results of thermal and electrical prototypes are presented. The design includes the mechanical structure, the cooling of electronics, read-out, clock distribution, slow control, data-acquisition, trigger, monitoring and services. A 133-pixel prototype with full scale mechanics, cooling, data acquisition and slow control will be built at the end of 2014.
PACS—Realization of an adaptive concept using pressure actuated cellular structures
NASA Astrophysics Data System (ADS)
Gramüller, B.; Boblenz, J.; Hühne, C.
2014-10-01
A biologically inspired concept is investigated which can be utilized to develop energy efficient, lightweight and applicational flexible adaptive structures. Building a real life morphing unit is an ambitious task as the numerous works in the particular field show. Summarizing fundamental demands and barriers regarding shape changing structures, the basic challenges of designing morphing structures are listed. The concept of Pressure Actuated Cellular Structures (PACS) is arranged within the recent morphing activities and it is shown that it complies with the underlying demands. Systematically divided into energy-related and structural subcomponents the working principle is illuminated and relationships between basic design parameters are expressed. The analytical background describing the physical mechanisms of PACS is presented in concentrated manner. This work focuses on the procedure of dimensioning, realizing and experimental testing of a single cell and a single row cantilever made of PACS. The experimental outcomes as well as the results from the FEM computations are used for evaluating the analytical methods. The functionality of the basic principle is thus validated and open issues are determined pointing the way ahead.
Cut-and-paste restoration of entanglement transmission
NASA Astrophysics Data System (ADS)
Cuevas, Álvaro; Mari, Andrea; De Pasquale, Antonella; Orieux, Adeline; Massaro, Marcello; Sciarrino, Fabio; Mataloni, Paolo; Giovannetti, Vittorio
2017-07-01
The distribution of entangled quantum systems among two or more nodes of a network is a key task at the basis of quantum communication, quantum computation, and quantum cryptography. Unfortunately, the transmission lines used in this procedure can introduce so many perturbations and so much noise in the transmitted signal that they prevent the possibility of restoring quantum correlations in the received messages either by means of encoding optimization or by exploiting local operations and classical communication. In this work we present a procedure which allows one to improve the performance of some of these channels. The mechanism underpinning this result is a protocol which we dub cut and paste, as it consists in extracting and reshuffling the subcomponents of these communication lines, which finally succeed in correcting each other. The proof of this counterintuitive phenomenon, while improving our theoretical understanding of quantum entanglement, also has a direct application in the realization of quantum information networks based on imperfect and highly noisy communication lines. A quantum optics experiment, based on the transmission of single-photon polarization states, is also presented which provides a proof-of-principle test of the proposed protocol.
NASA Astrophysics Data System (ADS)
Beckett, Douglas J. S.; Hickey, Ryan; Logan, Dylan F.; Knights, Andrew P.; Chen, Rong; Cao, Bin; Wheeldon, Jeffery F.
2018-02-01
Quantum dot comb sources integrated with silicon photonic ring-resonator filters and modulators enable the realization of optical sub-components and modules for both inter- and intra-data-center applications. Low-noise, multi-wavelength, single-chip, laser sources, PAM4 modulation and direct detection allow a practical, scalable, architecture for applications beyond 400 Gb/s. Multi-wavelength, single-chip light sources are essential for reducing power dissipation, space and cost, while silicon photonic ring resonators offer high-performance with space and power efficiency.
NASA Technical Reports Server (NTRS)
Polanco, Michael A.; Kellas, Sotiris; Jackson, Karen
2009-01-01
The performance of material models to simulate a novel composite honeycomb Deployable Energy Absorber (DEA) was evaluated using the nonlinear explicit dynamic finite element code LS-DYNA(Registered TradeMark). Prototypes of the DEA concept were manufactured using a Kevlar/Epoxy composite material in which the fibers are oriented at +/-45 degrees with respect to the loading axis. The development of the DEA has included laboratory tests at subcomponent and component levels such as three-point bend testing of single hexagonal cells, dynamic crush testing of single multi-cell components, and impact testing of a full-scale fuselage section fitted with a system of DEA components onto multi-terrain environments. Due to the thin nature of the cell walls, the DEA was modeled using shell elements. In an attempt to simulate the dynamic response of the DEA, it was first represented using *MAT_LAMINATED_COMPOSITE_FABRIC, or *MAT_58, in LS-DYNA. Values for each parameter within the material model were generated such that an in-plane isotropic configuration for the DEA material was assumed. Analytical predictions showed that the load-deflection behavior of a single-cell during three-point bending was within the range of test data, but predicted the DEA crush response to be very stiff. In addition, a *MAT_PIECEWISE_LINEAR_PLASTICITY, or *MAT_24, material model in LS-DYNA was developed, which represented the Kevlar/Epoxy composite as an isotropic elastic-plastic material with input from +/-45 degrees tensile coupon data. The predicted crush response matched that of the test and localized folding patterns of the DEA were captured under compression, but the model failed to predict the single-cell three-point bending response.
NASA Technical Reports Server (NTRS)
Ott, Melanie; Thomes, W. Joe; Blair, Diana; Chuska, Rick; Switzer, Rob
2010-01-01
The Diamond AVIM optical fiber connector has been used for over a decade in flight environments. AVIM which stands for Aviation Intermediate Maintenance is always referenced as a fiber optic connector type from the DIN (Deutsches Institut fur Normung) family of optical fiber connectors. The newly available Mini AVIM and DMI (Definition Multimedia Interface) connectors also by Diamond provide similar features as the high performance AVIM with the added benefits of being small form factor for board mount and internal box use where long connectors and strain relief can not be accommodated. Transceiver, fiber laser technology and receiver optic technology based on small sized constraints will benefit the most by the reduction in connector form factor. It is for this reason that the Mini AVIM is being evaluated for multimode and single mode optical fiber use in both fiber based and cable based packaging configurations. In a fiber based termination, there are no cable materials to bond to the connector. The only bonding that is conducted is the mounting of the fiber with epoxy to the connector ferrules (which are called DMI ferrules). In a cable configuration, the compatibility of the connector subcomponents along with the upjacketing materials of the cable around the fiber needs to be considered carefully for termination fabrication. Cabled terminations will show greater insertion loss and high probability of failures during thermal cycling testing. This is due to the stressing of the combination of materials that each have different Coefficients of Thermal Expansion (CTE's) and that are bonded together to the connector subcomponents. As the materials flex during thermal excursions, forces are applied to the termination and can make the system fail if the grouping of materials (per their CTE's) are not compatible and this includes cable materials, epoxies, ferrule and connector body components. For this evaluation, multimode 100 micron core step index fiber was used for the fiber terminated condition, and single mode SMF-28 upjacketed with W.L. Gore Flexlite was used for the cabled configuration. For background purposes, a comparison is presented here for information purposes between the high performance AVIM connector features and the Mini AVIM small form factor connectors. Basic connector features are described here.
NASA Technical Reports Server (NTRS)
OBrien, T. Kevin; Paris, Isabelle L.
2004-01-01
Small sub-component specimens consisting of solid laminates at the ends that transition to X-cor(R) truss sandwich in the center, were tested in a combination of three point bending, uni-axial tension, and combined tension and bending. The failure process in the transition region was documented for each loading using digital video and high-resolution cameras. For the 3-point bending tests, most of the deformation occurred in the solid laminate regions on either end of the specimen. Some pin debonding from the skin of the X-cor(R) truss sandwich was observed in the transition region and was accompanied by audible "pings" throughout the loading. Tension loaded specimens failed in the sandwich skin in the middle of the gage length, accompanied by separation of the sandwich core from the back skin and by delamination between the top skin and bottom skin at the transition region. The pinging associated with pin debonding occurred as the load was increased. However, the frequency of the pinging exceeded any visual observations of pin debonding in the video of the transition region. For specimens tested in combined tension and bending, the greatest amount of pinging occurred during initial application of the axial load. High-resolution images in the transition region indicated that the pinging corresponded to pins debonding and buckling due to the through-thickness Poisson contraction of the specimen. This buckling continued to a much smaller extent as the transverse load was applied.
Ruan, Jesse S; El-Jawahri, Raed; Rouhana, Stephen W; Barbat, Saeed; Prasad, Priya
2006-11-01
The biofidelity of the Ford Motor Company human body finite element (FE) model in side impact simulations was analyzed and evaluated following the procedures outlined in ISO technical report TR9790. This FE model, representing a 50th percentile adult male, was used to simulate the biomechanical impact tests described in ISO-TR9790. These laboratory tests were considered as suitable for assessing the lateral impact biofidelity of the head, neck, shoulder, thorax, abdomen, and pelvis of crash test dummies, subcomponent test devices, and math models that are used to represent a 50th percentile adult male. The simulated impact responses of the head, neck, shoulder, thorax, abdomen, and pelvis of the FE model were compared with the PMHS (Post Mortem Human Subject) data upon which the response requirements for side impact surrogates was based. An overall biofidelity rating of the human body FE model was determined using the ISO-TR9790 rating method. The resulting rating for the human body FE model was 8.5 on a 0 to 10 scale with 8.6-10 being excellent biofidelity. In addition, in order to explore whether there is a dependency of the impact responses of the FE model on different analysis codes, three commercially available analysis codes, namely, LS-DYNA, Pamcrash, and Radioss were used to run the human body FE model. Effects of these codes on biofidelity when compared with ISO-TR9790 data are discussed. Model robustness and numerical issues arising with three different code simulations are also discussed.
Park, Yoon Soo; Lineberry, Matthew; Hyderi, Abbas; Bordage, Georges; Xing, Kuan; Yudkowsky, Rachel
2016-11-01
Medical schools administer locally developed graduation competency examinations (GCEs) following the structure of the United States Medical Licensing Examination Step 2 Clinical Skills that combine standardized patient (SP)-based physical examination and the patient note (PN) to create integrated clinical encounter (ICE) scores. This study examines how different subcomponent scoring weights in a locally developed GCE affect composite score reliability and pass-fail decisions for ICE scores, contributing to internal structure and consequential validity evidence. Data from two M4 cohorts (2014: n = 177; 2015: n = 182) were used. The reliability of SP encounter (history taking and physical examination), PN, and communication and interpersonal skills scores were estimated with generalizability studies. Composite score reliability was estimated for varying weight combinations. Faculty were surveyed for preferred weights on the SP encounter and PN scores. Composite scores based on Kane's method were compared with weighted mean scores. Faculty suggested weighting PNs higher (60%-70%) than the SP encounter scores (30%-40%). Statistically, composite score reliability was maximized when PN scores were weighted at 40% to 50%. Composite score reliability of ICE scores increased by up to 0.20 points when SP-history taking (SP-Hx) scores were included; excluding SP-Hx only increased composite score reliability by 0.09 points. Classification accuracy for pass-fail decisions between composite and weighted mean scores was 0.77; misclassification was < 5%. Medical schools and certification agencies should consider implications of assigning weights with respect to composite score reliability and consequences on pass-fail decisions.
Diminution of context association memory structure in subjects with subjective cognitive decline.
Fan, Ling-Yun; Lai, Ya-Mei; Chen, Ta-Fu; Hsu, Yung-Chin; Chen, Pin-Yu; Huang, Kuo-Zhou; Cheng, Ting-Wen; Tseng, Wen-Yi Isaac; Hua, Mau-Sun; Chen, Ya-Fang; Chiu, Ming-Jang
2018-06-01
Alzheimer's disease (AD) progresses insidiously from the preclinical stage to dementia. While people with subjective cognitive decline (SCD) have normal cognitive performance, some may be in the preclinical stage of AD. Neurofibrillary tangles appear first in the transentorhinal cortex, followed by the entorhinal cortex in the clinically silent stage of AD. We expected the earliest changes in subjects with SCD to occur in medial temporal subfields other than the hippocampal proper. These selective structural changes would affect specific memory subcomponents. We used the Family Picture subtest of the Wechsler Memory Scale-III, which was modified to separately compute character, activity, and location subscores for episodic memory subcomponents. We recruited 43 subjects with SCD, 44 subjects with amnesic mild cognitive impairment, and 34 normal controls. MRI was used to assess cortical thickness, subcortical gray matter volume, and fractional anisotropy. The results demonstrated that SCD subjects showed significant cortical atrophy in their bilateral parahippocampus and perirhinal and the left entorhinal cortices but not in their hippocampal regions. SCD subjects also exhibited significantly decreased mean fractional anisotropy in their bilateral uncinate fasciculi. The diminution of cortical thickness over the mesial temporal subfields corresponded to brain areas with early tangle deposition, and early degradation of the uncinate fasciculus was in accordance with the retrogenesis hypothesis. The parahippocampus and perirhinal cortex contribute mainly to context association memory while the entorhinal cortex, along with the uncinate fasciculus, contributes to content-related contextual memory. We proposed that context association and related memory structures are vulnerable in the SCD stage. © 2018 Wiley Periodicals, Inc.
Hierarchical graphs for better annotations of rule-based models of biochemical systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hu, Bin; Hlavacek, William
2009-01-01
In the graph-based formalism of the BioNetGen language (BNGL), graphs are used to represent molecules, with a colored vertex representing a component of a molecule, a vertex label representing the internal state of a component, and an edge representing a bond between components. Components of a molecule share the same color. Furthermore, graph-rewriting rules are used to represent molecular interactions, with a rule that specifies addition (removal) of an edge representing a class of association (dissociation) reactions and with a rule that specifies a change of vertex label representing a class of reactions that affect the internal state of amore » molecular component. A set of rules comprises a mathematical/computational model that can be used to determine, through various means, the system-level dynamics of molecular interactions in a biochemical system. Here, for purposes of model annotation, we propose an extension of BNGL that involves the use of hierarchical graphs to represent (1) relationships among components and subcomponents of molecules and (2) relationships among classes of reactions defined by rules. We illustrate how hierarchical graphs can be used to naturally document the structural organization of the functional components and subcomponents of two proteins: the protein tyrosine kinase Lck and the T cell receptor (TCR)/CD3 complex. Likewise, we illustrate how hierarchical graphs can be used to document the similarity of two related rules for kinase-catalyzed phosphorylation of a protein substrate. We also demonstrate how a hierarchical graph representing a protein can be encoded in an XML-based format.« less
Arlaud, G J; Gagnon, J; Porter, R R
1982-01-01
1. The a- and b-chains of reduced and alkylated human complement subcomponent C1r were separated by high-pressure gel-permeation chromatography and isolated in good yield and in pure form. 2. CNBr cleavage of C1r b-chain yielded eight major peptides, which were purified by gel filtration and high-pressure reversed-phase chromatography. As determined from the sum of their amino acid compositions, these peptides accounted for a minimum molecular weight of 28 000, close to the value 29 100 calculated from the whole b-chain. 3. N-Terminal sequence determinations of C1r b-chain and its CNBr-cleavage peptides allowed the identification of about two-thirds of the amino acids of C1r b-chain. From our results, and on the basis of homology with other serine proteinases, an alignment of the eight CNBr-cleavage peptides from C1r b-chain is proposed. 4. The residues forming the 'charge-relay' system of the active site of serine proteinases (His-57, Asp-102 and Ser-195 in the chymotrypsinogen numbering) are found in the corresponding regions of C1r b-chain, and the amino acid sequence around these residues has been determined. 5. The N-terminal sequence of C1r b-chain has been extended to residue 60 and reveals that C1r b-chain lacks the 'histidine loop', a disulphide bond that is present in all other known serine proteinases.
Cheon, Gowoon; Duerloo, Karel-Alexander N; Sendek, Austin D; Porter, Chase; Chen, Yuan; Reed, Evan J
2017-03-08
Layered materials held together by weak interactions including van der Waals forces, such as graphite, have attracted interest for both technological applications and fundamental physics in their layered form and as an isolated single-layer. Only a few dozen single-layer van der Waals solids have been subject to considerable research focus, although there are likely to be many more that could have superior properties. To identify a broad spectrum of layered materials, we present a novel data mining algorithm that determines the dimensionality of weakly bonded subcomponents based on the atomic positions of bulk, three-dimensional crystal structures. By applying this algorithm to the Materials Project database of over 50,000 inorganic crystals, we identify 1173 two-dimensional layered materials and 487 materials that consist of weakly bonded one-dimensional molecular chains. This is an order of magnitude increase in the number of identified materials with most materials not known as two- or one-dimensional materials. Moreover, we discover 98 weakly bonded heterostructures of two-dimensional and one-dimensional subcomponents that are found within bulk materials, opening new possibilities for much-studied assembly of van der Waals heterostructures. Chemical families of materials, band gaps, and point groups for the materials identified in this work are presented. Point group and piezoelectricity in layered materials are also evaluated in single-layer forms. Three hundred and twenty-five of these materials are expected to have piezoelectric monolayers with a variety of forms of the piezoelectric tensor. This work significantly extends the scope of potential low-dimensional weakly bonded solids to be investigated.
Feature Extraction from Subband Brain Signals and Its Classification
NASA Astrophysics Data System (ADS)
Mukul, Manoj Kumar; Matsuno, Fumitoshi
This paper considers both the non-stationarity as well as independence/uncorrelated criteria along with the asymmetry ratio over the electroencephalogram (EEG) signals and proposes a hybrid approach of the signal preprocessing methods before the feature extraction. A filter bank approach of the discrete wavelet transform (DWT) is used to exploit the non-stationary characteristics of the EEG signals and it decomposes the raw EEG signals into the subbands of different center frequencies called as rhythm. A post processing of the selected subband by the AMUSE algorithm (a second order statistics based ICA/BSS algorithm) provides the separating matrix for each class of the movement imagery. In the subband domain the orthogonality as well as orthonormality criteria over the whitening matrix and separating matrix do not come respectively. The human brain has an asymmetrical structure. It has been observed that the ratio between the norms of the left and right class separating matrices should be different for better discrimination between these two classes. The alpha/beta band asymmetry ratio between the separating matrices of the left and right classes will provide the condition to select an appropriate multiplier. So we modify the estimated separating matrix by an appropriate multiplier in order to get the required asymmetry and extend the AMUSE algorithm in the subband domain. The desired subband is further subjected to the updated separating matrix to extract subband sub-components from each class. The extracted subband sub-components sources are further subjected to the feature extraction (power spectral density) step followed by the linear discriminant analysis (LDA).
Remote Thermal Analysis Through the Internet
NASA Astrophysics Data System (ADS)
Malroy, Eric T.
2002-07-01
The Heater of the Hypersonic Tunnel Facility (HTF) was modeled using SINDA/FLUINT thermal software. A description of the model is given. The project presented the opportunity of interfacing the thermal model with the Internet and was a demonstration that complex analysis is possible through the Internet. Some of the issues that need to be addressed related to interfacing software with the Internet are the following: justification for using the Internet, selection of the web server, choice of the CGI language, security of the system, communication among the parties, maintenance of state between web pages, and simultaneous users on the Internet system. The opportunities available for using the Internet for analysis are many and can present a significant jump in technology. This paper presents a vision how interfacing with the Internet could develop in the future. Using a separate Optical Internet (OI) for analysis, coupled with virtual reality analysis rooms (VRAR), could provide a synergistic environment to couple together engineering analysis within industry, academia, and government. The process of analysis could be broken down into sub-components so that specialization could occur resulting in superior quality, minimized cost and reduced time for engineering analysis and manufacturing. Some possible subcomponents of the system are solver routines, databases, Graphical User Interfaces, engineering design software, VRARs, computer processing, CAD systems, manufacturing, and a plethora of other options only limited by ones imagination. On a larger scope, the specialization of companies on the optical network would allow companies to rapidly construct and reconstruct their infrastructure based on changing economic conditions. This could transform business.
NASA Technical Reports Server (NTRS)
Melis, Matthew E.; Revilock, Duane M.; Pereira, Michael J.; Lyle, Karen H.
2009-01-01
Following the tragedy of the Orbiter Columbia (STS-107) on February 1, 2003, a major effort commenced to develop a better understanding of debris impacts and their effect on the space shuttle subsystems. An initiative to develop and validate physics-based computer models to predict damage from such impacts was a fundamental component of this effort. To develop the models it was necessary to physically characterize reinforced carbon-carbon (RCC) along with ice and foam debris materials, which could shed on ascent and impact the orbiter RCC leading edges. The validated models enabled the launch system community to use the impact analysis software LS-DYNA (Livermore Software Technology Corp.) to predict damage by potential and actual impact events on the orbiter leading edge and nose cap thermal protection systems. Validation of the material models was done through a three-level approach: Level 1--fundamental tests to obtain independent static and dynamic constitutive model properties of materials of interest, Level 2--subcomponent impact tests to provide highly controlled impact test data for the correlation and validation of the models, and Level 3--full-scale orbiter leading-edge impact tests to establish the final level of confidence for the analysis methodology. This report discusses the Level 2 test program conducted in the NASA Glenn Research Center (GRC) Ballistic Impact Laboratory with ice projectile impact tests on flat RCC panels, and presents the data observed. The Level 2 testing consisted of 54 impact tests in the NASA GRC Ballistic Impact Laboratory on 6- by 6-in. and 6- by 12-in. flat plates of RCC and evaluated three types of debris projectiles: Single-crystal, polycrystal, and "soft" ice. These impact tests helped determine the level of damage generated in the RCC flat plates by each projectile and validated the use of the ice and RCC models for use in LS-DYNA.
NASA Technical Reports Server (NTRS)
Melis, Matthew E.; Revilock, Duane M.; Pereira, Michael J.; Lyle, Karen H.
2009-01-01
Following the tragedy of the Orbiter Columbia (STS-107) on February 1, 2003, a major effort commenced to develop a better understanding of debris impacts and their effect on the space shuttle subsystems. An initiative to develop and validate physics-based computer models to predict damage from such impacts was a fundamental component of this effort. To develop the models it was necessary to physically characterize reinforced carbon-carbon (RCC) along with ice and foam debris materials, which could shed on ascent and impact the orbiter RCC leading edges. The validated models enabled the launch system community to use the impact analysis software LS-DYNA (Livermore Software Technology Corp.) to predict damage by potential and actual impact events on the orbiter leading edge and nose cap thermal protection systems. Validation of the material models was done through a three-level approach: Level 1-fundamental tests to obtain independent static and dynamic constitutive model properties of materials of interest, Level 2-subcomponent impact tests to provide highly controlled impact test data for the correlation and validation of the models, and Level 3-full-scale orbiter leading-edge impact tests to establish the final level of confidence for the analysis methodology. This report discusses the Level 2 test program conducted in the NASA Glenn Research Center (GRC) Ballistic Impact Laboratory with external tank foam impact tests on flat RCC panels, and presents the data observed. The Level 2 testing consisted of 54 impact tests in the NASA GRC Ballistic Impact Laboratory on 6- by 6-in. and 6- by 12-in. flat plates of RCC and evaluated two types of debris projectiles: BX-265 and PDL-1034 external tank foam. These impact tests helped determine the level of damage generated in the RCC flat plates by each projectile and validated the use of the foam and RCC models for use in LS-DYNA.
Cipresso, Pietro; Albani, Giovanni; Serino, Silvia; Pedroli, Elisa; Pallavicini, Federica; Mauro, Alessandro; Riva, Giuseppe
2014-01-01
Introduction: Several recent studies have pointed out that early impairment of executive functions (EFs) in Parkinson’s Disease (PD) may be a crucial marker to detect patients at risk for developing dementia. The main objective of this study was to compare the performances of PD patients with mild cognitive impairment (PD-MCI) with PD patients with normal cognition (PD-NC) and a control group (CG) using a traditional assessment of EFs and the Virtual Multiple Errands Test (VMET), a virtual reality (VR)-based tool. In order to understand which subcomponents of EFs are early impaired, this experimental study aimed to investigate specifically which instrument best discriminates among these three groups. Materials and methods: The study included three groups of 15 individuals each (for a total of 45 participants): 15 PD-NC; 15 PD-MCI, and 15 cognitively healthy individuals (CG). To assess the global neuropsychological functioning and the EFs, several tests (including the Mini Mental State Examination (MMSE), Clock Drawing Test, and Tower of London test) were administered to the participants. The VMET was used for a more ecologically valid neuropsychological evaluation of EFs. Results: Findings revealed significant differences in the VMET scores between the PD-NC patients vs. the controls. In particular, patients made more errors in the tasks of the VMET, and showed a poorer ability to use effective strategies to complete the tasks. This VMET result seems to be more sensitive in the early detection of executive deficits because these two groups did not differ in the traditional assessment of EFs (neuropsychological battery). Conclusion: This study offers initial evidence that a more ecologically valid evaluation of EFs is more likely to lead to detection of subtle executive deficits. PMID:25538578
Cipresso, Pietro; Albani, Giovanni; Serino, Silvia; Pedroli, Elisa; Pallavicini, Federica; Mauro, Alessandro; Riva, Giuseppe
2014-01-01
Several recent studies have pointed out that early impairment of executive functions (EFs) in Parkinson's Disease (PD) may be a crucial marker to detect patients at risk for developing dementia. The main objective of this study was to compare the performances of PD patients with mild cognitive impairment (PD-MCI) with PD patients with normal cognition (PD-NC) and a control group (CG) using a traditional assessment of EFs and the Virtual Multiple Errands Test (VMET), a virtual reality (VR)-based tool. In order to understand which subcomponents of EFs are early impaired, this experimental study aimed to investigate specifically which instrument best discriminates among these three groups. The study included three groups of 15 individuals each (for a total of 45 participants): 15 PD-NC; 15 PD-MCI, and 15 cognitively healthy individuals (CG). To assess the global neuropsychological functioning and the EFs, several tests (including the Mini Mental State Examination (MMSE), Clock Drawing Test, and Tower of London test) were administered to the participants. The VMET was used for a more ecologically valid neuropsychological evaluation of EFs. Findings revealed significant differences in the VMET scores between the PD-NC patients vs. the controls. In particular, patients made more errors in the tasks of the VMET, and showed a poorer ability to use effective strategies to complete the tasks. This VMET result seems to be more sensitive in the early detection of executive deficits because these two groups did not differ in the traditional assessment of EFs (neuropsychological battery). This study offers initial evidence that a more ecologically valid evaluation of EFs is more likely to lead to detection of subtle executive deficits.
Diagnostics and Optimization of a Miniature High Frequency Pulse Tube Cryocooler
NASA Astrophysics Data System (ADS)
Garaway, I.; Veprik, A.; Radebaugh, R.
2010-04-01
A miniature, high energy density, pulse tube cryocooler with an inertance tube and reservoir has been developed, tested, diagnosed and optimized to provide appropriate cooling for size-limited cryogenic applications demanding fast cool down. This cryocooler, originally designed using REGEN 3.2 for 80 K, an operating frequency of 150 Hz and an average pressure of 5.0 MPa, has regenerator dimensions of 4.4 mm inside diameter and 27 mm length and is filled with ♯635 mesh stainless steel screen. Various design features, such as the use of compact heat exchangers and a miniature linear compressor, resulted in a remarkably compact pulse tube cryocooler. In this report, we present the preliminary test results and the subsequent diagnostic and optimization sequence performed to improve the overall design and operation of the complete cryocooler. These experimentally determined optimal parameters, though slightly different from those proposed in the initial numerical model, yielded 530 mW of gross cooling power at 120 K with an input electrical power of only 25 W. This study highlights the need to further establish our understanding of miniature, high frequency, regenerative cryocoolers, not only as a collection of independent subcomponents, but as one single working unit. It has also led to a list of additional improvements that may yet be made to even further improve the operating characteristics of such a complete miniature cryocooler.
Formulation of an experimental substructure model using a Craig-Bampton based transmission simulator
Kammer, Daniel C.; Allen, Matthew S.; Mayes, Randall L.
2015-09-26
An experimental–analytical substructuring is attractive when there is motivation to replace one or more system subcomponents with an experimental model. This experimentally derived substructure can then be coupled to finite element models of the rest of the structure to predict the system response. The transmission simulator method couples a fixture to the component of interest during a vibration test in order to improve the experimental model for the component. The transmission simulator is then subtracted from the tested system to produce the experimental component. This method reduces ill-conditioning by imposing a least squares fit of constraints between substructure modal coordinatesmore » to connect substructures, instead of directly connecting physical interface degrees of freedom. This paper presents an alternative means of deriving the experimental substructure model, in which a Craig–Bampton representation of the transmission simulator is created and subtracted from the experimental measurements. The corresponding modal basis of the transmission simulator is described by the fixed-interface modes, rather than free modes that were used in the original approach. Moreover, these modes do a better job of representing the shape of the transmission simulator as it responds within the experimental system, leading to more accurate results using fewer modes. The new approach is demonstrated using a simple finite element model based example with a redundant interface.« less
[Role of creative discussion in the learning of critical reading of scientific articles].
Cobos-Aguilar, Héctor; Viniegra-Velázquez, Leonardo; Pérez-Cortés, Patricia
2011-01-01
To compare two active educational strategies on critical reading (two and three stages) for research learning in medical students. Four groups were conformed in a quasi-experimental design. The medical student group, related to three stages (critical reading guide resolution, creative discussion, group discussion) g1, n = 9 with school marks > 90 and g2, n = 19 with a < 90, respectively. The two-stage groups (guide resolution and group discussion) were conformed by pre-graduate interns, g3, n = 17 and g4, n = 12, who attended social security general hospitals. A validated and consistent survey with 144 items was applied to the four groups before and after educational strategies. Critical reading with its subcomponents: interpretation, judgment and proposal were evaluated with 47, 49 and 48 items, respectively. The case control studies, cohort studies, diagnostic test and clinical trial designs were evaluated. Nonparametric significance tests were performed to compare the groups and their results. A bias calculation was performed for each group. The highest median was obtained by the three-stage groups (g1 and g2) and so were the medians in interpretation, judgment and proposal. The several research design results were higher in the same groups. An active educational strategy with three stages is superior to another with two stages in medical students. It is advisable to perform these activities in goal of better learning in our students.
Formulation of an experimental substructure model using a Craig-Bampton based transmission simulator
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kammer, Daniel C.; Allen, Matthew S.; Mayes, Randall L.
An experimental–analytical substructuring is attractive when there is motivation to replace one or more system subcomponents with an experimental model. This experimentally derived substructure can then be coupled to finite element models of the rest of the structure to predict the system response. The transmission simulator method couples a fixture to the component of interest during a vibration test in order to improve the experimental model for the component. The transmission simulator is then subtracted from the tested system to produce the experimental component. This method reduces ill-conditioning by imposing a least squares fit of constraints between substructure modal coordinatesmore » to connect substructures, instead of directly connecting physical interface degrees of freedom. This paper presents an alternative means of deriving the experimental substructure model, in which a Craig–Bampton representation of the transmission simulator is created and subtracted from the experimental measurements. The corresponding modal basis of the transmission simulator is described by the fixed-interface modes, rather than free modes that were used in the original approach. Moreover, these modes do a better job of representing the shape of the transmission simulator as it responds within the experimental system, leading to more accurate results using fewer modes. The new approach is demonstrated using a simple finite element model based example with a redundant interface.« less
A Helicene Nanoribbon with Greatly Amplified Chirality.
Schuster, Nathaniel J; Hernández Sánchez, Raúl; Bukharina, Daria; Kotov, Nicholas A; Berova, Nina; Ng, Fay; Steigerwald, Michael L; Nuckolls, Colin
2018-05-14
We report the synthesis and characterization of a chiral, shape-persistent, perylene-diimide-based nanoribbon. Specifically, the fusion of three perylene-diimide monomers with intervening naphthalene subunits resulted in a helical superstructure with two [6]helicene subcomponents. This π-helix-of-helicenes exhibits very intense electronic circular dichroism, including one of the largest Cotton effects ever observed in the visible range. It also displays more than an order of magnitude increase in circular dichroism for select wavelengths relative to its smaller homologue. These impressive chiroptical properties underscore the potential of this new nanoribbon architecture in the context of chiral electronic materials.
NASA Astrophysics Data System (ADS)
Paulsen, Lee; Hoffmann, Ted; Fulton, Caleb; Yeary, Mark; Saunders, Austin; Thompson, Dan; Chen, Bill; Guo, Alex; Murmann, Boris
2015-05-01
Phased array systems offer numerous advantages to the modern warfighter in multiple application spaces, including Radar, Electronic Warfare, Signals Intelligence, and Communications. However, a lack of commonality in the underlying technology base for DoD Phased Arrays has led to static systems with long development cycles, slow technology refreshes in response to emerging threats, and expensive, application-specific sub-components. The IMPACT module (Integrated Multi-use Phased Array Common Tile) is a multi-channel, reconfigurable, cost-effective beamformer that provides a common building block for multiple, disparate array applications.
Vetter, Nora C; Altgassen, Mareike; Phillips, Louise; Mahy, Caitlin E V; Kliegel, Matthias
2013-01-01
Theory of mind, the ability to understand mental states, involves inferences about others' cognitive (cognitive theory of mind) and emotional (affective theory of mind) mental states. The current study explored the role of executive functions in developing affective theory of mind across adolescence. Affective theory of mind and three subcomponents of executive functions (inhibition, updating, and shifting) were measured. Affective theory of mind was positively related to age, and all three executive functions. Specifically, inhibition explained the largest amount of variance in age-related differences in affective theory of mind.
Deep cultural ancestry and human development indicators across nation states
Sookias, Roland B.; Passmore, Samuel
2018-01-01
How historical connections, events and cultural proximity can influence human development is being increasingly recognized. One aspect of history that has only recently begun to be examined is deep cultural ancestry, i.e. the vertical relationships of descent between cultures, which can be represented by a phylogenetic tree of descent. Here, we test whether deep cultural ancestry predicts the United Nations Human Development Index (HDI) for 44 Eurasian countries, using language ancestry as a proxy for cultural relatedness and controlling for three additional factors—geographical proximity, religion and former communism. While cultural ancestry alone predicts HDI and its subcomponents (income, health and education indices), when geographical proximity is included only income and health indices remain significant and the effect is small. When communism and religion variables are included, cultural ancestry is no longer a significant predictor; communism significantly negatively predicts HDI, income and health indices, and Muslim percentage of the population significantly negatively predicts education index, although the latter result may not be robust. These findings indicate that geographical proximity and recent cultural history—especially communism—are more important than deep cultural factors in current human development and suggest the efficacy of modern policy initiatives is not tightly constrained by cultural ancestry. PMID:29765628
NASA Technical Reports Server (NTRS)
Singh, Mrityunjay
2006-01-01
Advanced ceramics and fiber reinforced composites are under active consideration for use in a wide variety of high temperature applications within the aeronautics, space transportation, energy, and nuclear industries. The engineering designs of ceramic and composite components require fabrication and manufacturing of large and complex shaped parts of various thicknesses. In many instances, it is more economical to build up complex shapes by joining simple geometrical shapes. In addition, these components have to be joined or assembled with metallic sub-components. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of high temperature joints in advanced ceramics and ceramic matrix composites will be presented. Silicon carbide based advanced ceramics and fiber reinforced composites in different shapes and sizes, have been joined using an affordable, robust ceramic joining technology. In addition, some examples of metal-ceramic brazing will also be presented. Microstructure and high temperature mechanical properties of joints in silicon carbide ceramics and composites will be reported. Various joint design philosophies and design issues in joining of ceramics and composites will be discussed.
Improved atmospheric 3D BSDF model in earthlike exoplanet using ray-tracing based method
NASA Astrophysics Data System (ADS)
Ryu, Dongok; Kim, Sug-Whan; Seong, Sehyun
2012-10-01
The studies on planetary radiative transfer computation have become important elements to disk-averaged spectral characterization of potential exoplanets. In this paper, we report an improved ray-tracing based atmospheric simulation model as a part of 3-D earth-like planet model with 3 principle sub-components i.e. land, sea and atmosphere. Any changes in ray paths and their characteristics such as radiative power and direction are computed as they experience reflection, refraction, transmission, absorption and scattering. Improved atmospheric BSDF algorithms uses Q.Liu's combined Rayleigh and aerosol Henrey-Greenstein scattering phase function. The input cloud-free atmosphere model consists of 48 layers with vertical absorption profiles and a scattering layer with their input characteristics using the GIOVANNI database. Total Solar Irradiance data are obtained from Solar Radiation and Climate Experiment (SORCE) mission. Using aerosol scattering computation, we first tested the atmospheric scattering effects with imaging simulation with HRIV, EPOXI. Then we examined the computational validity of atmospheric model with the measurements of global, direct and diffuse radiation taken from NREL(National Renewable Energy Laboratory)s pyranometers and pyrheliometers on a ground station for cases of single incident angle and for simultaneous multiple incident angles of the solar beam.
APDS: the autonomous pathogen detection system.
Hindson, Benjamin J; Makarewicz, Anthony J; Setlur, Ujwal S; Henderer, Bruce D; McBride, Mary T; Dzenitis, John M
2005-04-15
We have developed and tested a fully autonomous pathogen detection system (APDS) capable of continuously monitoring the environment for airborne biological threat agents. The system was developed to provide early warning to civilians in the event of a bioterrorism incident and can be used at high profile events for short-term, intensive monitoring or in major public buildings or transportation nodes for long-term monitoring. The APDS is completely automated, offering continuous aerosol sampling, in-line sample preparation fluidics, multiplexed detection and identification immunoassays, and nucleic acid-based polymerase chain reaction (PCR) amplification and detection. Highly multiplexed antibody-based and duplex nucleic acid-based assays are combined to reduce false positives to a very low level, lower reagent costs, and significantly expand the detection capabilities of this biosensor. This article provides an overview of the current design and operation of the APDS. Certain sub-components of the ADPS are described in detail, including the aerosol collector, the automated sample preparation module that performs multiplexed immunoassays with confirmatory PCR, and the data monitoring and communications system. Data obtained from an APDS that operated continuously for 7 days in a major U.S. transportation hub is reported.
GIS-based approach for optimized siting of municipal solid waste landfill.
Sumathi, V R; Natesan, Usha; Sarkar, Chinmoy
2008-11-01
The exponential rise in the urban population of the developing countries in the past few decades and the resulting accelerated urbanization phenomenon has brought to the fore the necessity to develop environmentally sustainable and efficient waste management systems. Sanitary landfill constitutes one of the primary methods of municipal solid waste disposal. Optimized siting decisions have gained considerable importance in order to ensure minimum damage to the various environmental sub-components as well as reduce the stigma associated with the residents living in its vicinity, thereby enhancing the overall sustainability associated with the life cycle of a landfill. This paper addresses the siting of a new landfill using a multi-criteria decision analysis (MCDA) and overlay analysis using a geographic information system (GIS). The proposed system can accommodate new information on the landfill site selection by updating its knowledge base. Several factors are considered in the siting process including geology, water supply resources, land use, sensitive sites, air quality and groundwater quality. Weightings were assigned to each criterion depending upon their relative importance and ratings in accordance with the relative magnitude of impact. The results from testing the system using different sites show the effectiveness of the system in the selection process.
Sentence processing in the cerebral cortex.
Sakai, K L; Hashimoto, R; Homae, F
2001-01-01
Human language is a unique faculty of the mind. It has been the ultimate mystery throughout the history of neuroscience. Despite many aphasia and functional imaging studies, the exact correlation between cortical language areas and subcomponents of the linguistic system has not been established. One notable drawback is that most functional imaging studies have tested language tasks at the word level, such as lexical decision and word generation tasks, thereby neglecting the syntactic aspects of the language faculty. As proposed by Chomsky, the critical knowledge of language involves universal grammar (UG), which governs the syntactic structure of sentences. In this article, we will review recent advances made by functional neuroimaging studies of language, focusing especially on sentence processing in the cerebral cortex. We also present the recent results of our functional magnetic resonance imaging (fMRI) study intended to identify cortical areas specifically involved in syntactic processing. A study of sentence processing that employs a newly developed technique, optical topography (OT), is also presented. Based on these findings, we propose a modular specialization of Broca's area, Wernicke's area, and the angular gyrus/supramarginal gyrus. The current direction of research in neuroscience is beginning to establish the existence of distinct modules responsible for our knowledge of language.
Virology, Immunology and Pathology of Human Rabies During Treatment
Caicedo, Yolanda; Paez, Andres; Kuzmin, Ivan; Niezgoda, Michael; Orciari, Lillian A.; Yager, Pamela A.; Recuenco, Sergio; Franka, Richard; Velasco-Villa, Andres; Willoughby, Rodney E.
2016-01-01
Background Rabies is an acute fatal encephalitis caused by all members of the Lyssavirus genus. The first human rabies survivor without benefit of prior vaccination was reported from Milwaukee in 2005. We report a second unvaccinated patient who showed early recovery from rabies and then died accidentally during convalescence, providing an unparalleled opportunity to examine the histopathology as well as immune and virological correlates of early recovery from human rabies. Methods Case report, rapid fluorescent focus inhibition test, enzyme-linked immunosorbent assay, indirect and direct fluorescent antibody assays, reverse-transcriptase polymerase chain reaction, phylogenetic reconstruction, isolation in tissue culture, pathology and immunohistochemistry. Results The 9 year old died 76 days after presenting with rabies of vampire bat phylogeny transmitted by cat bite. Antibody response in serum and cerebrospinal fluid was robust and associated with severe cerebral edema. No rabies virus was cultured at autopsy. Rabies virus antigen was atypical in size and distribution. Rabies virus genome was present in neocortex but absent in brainstem. Conclusions Clinical recovery was associated with detection of neutralizing antibody and clearance of infectious rabies virus in the central nervous system by 76 days but not clearance of detectable viral subcomponents such as nucleoprotein antigen or RNA in brain. PMID:25405805
Deep cultural ancestry and human development indicators across nation states.
Sookias, Roland B; Passmore, Samuel; Atkinson, Quentin D
2018-04-01
How historical connections, events and cultural proximity can influence human development is being increasingly recognized. One aspect of history that has only recently begun to be examined is deep cultural ancestry, i.e. the vertical relationships of descent between cultures, which can be represented by a phylogenetic tree of descent. Here, we test whether deep cultural ancestry predicts the United Nations Human Development Index (HDI) for 44 Eurasian countries, using language ancestry as a proxy for cultural relatedness and controlling for three additional factors-geographical proximity, religion and former communism. While cultural ancestry alone predicts HDI and its subcomponents (income, health and education indices), when geographical proximity is included only income and health indices remain significant and the effect is small. When communism and religion variables are included, cultural ancestry is no longer a significant predictor; communism significantly negatively predicts HDI, income and health indices, and Muslim percentage of the population significantly negatively predicts education index, although the latter result may not be robust. These findings indicate that geographical proximity and recent cultural history-especially communism-are more important than deep cultural factors in current human development and suggest the efficacy of modern policy initiatives is not tightly constrained by cultural ancestry.
Brion, Mélanie; Pitel, Anne-Lise; Beaunieux, Hélène; Maurage, Pierre
2014-01-01
Korsakoff syndrome (KS) is a neurological state mostly caused by alcohol-dependence and leading to disproportionate episodic memory deficits. KS patients present more severe anterograde amnesia than Alcohol-Dependent Subjects (ADS), which led to the continuum hypothesis postulating a progressive increase in brain and cognitive damages during the evolution from ADS to KS. This hypothesis has been extensively examined for memory but is still debated for other abilities, notably executive functions (EF). EF have up to now been explored by unspecific tasks in KS, and few studies explored their interactions with memory. Exploring EF in KS by specific tasks based on current EF models could thus renew the exploration of the continuum hypothesis. This paper will propose a research program aiming at: (1) clarifying the extent of executive dysfunctions in KS by tasks focusing on specific EF subcomponents; (2) determining the differential EF deficits in ADS and KS; (3) exploring EF-memory interactions in KS with innovative tasks. At the fundamental level, this exploration will test the continuum hypothesis beyond memory. At the clinical level, it will propose new rehabilitation tools focusing on the EF specifically impaired in KS.
Brion, Mélanie; Pitel, Anne-Lise; Beaunieux, Hélène; Maurage, Pierre
2014-01-01
Korsakoff syndrome (KS) is a neurological state mostly caused by alcohol-dependence and leading to disproportionate episodic memory deficits. KS patients present more severe anterograde amnesia than Alcohol-Dependent Subjects (ADS), which led to the continuum hypothesis postulating a progressive increase in brain and cognitive damages during the evolution from ADS to KS. This hypothesis has been extensively examined for memory but is still debated for other abilities, notably executive functions (EF). EF have up to now been explored by unspecific tasks in KS, and few studies explored their interactions with memory. Exploring EF in KS by specific tasks based on current EF models could thus renew the exploration of the continuum hypothesis. This paper will propose a research program aiming at: (1) clarifying the extent of executive dysfunctions in KS by tasks focusing on specific EF subcomponents; (2) determining the differential EF deficits in ADS and KS; (3) exploring EF-memory interactions in KS with innovative tasks. At the fundamental level, this exploration will test the continuum hypothesis beyond memory. At the clinical level, it will propose new rehabilitation tools focusing on the EF specifically impaired in KS. PMID:25071526
Lowe, Jeremiah T; Li, Xinning; Fasulo, Sydney M; Testa, Edward J; Jawa, Andrew
2017-03-01
Patient-reported outcome measures (PROMs) are valuable tools for quantifying outcomes of orthopedic surgery. However, when baseline scores are not obtained, there is considerable controversy about whether PROMs can be administered retrospectively for patients to recall their preoperative state. We investigated the accuracy of patient recall after total shoulder arthroplasty (TSA) using the American Shoulder and Elbow Surgeons (ASES) assessment score. Recalled ASES scores were collected postoperatively at 6 weeks, 3 months, 6 months, and 12 months from 169 patients who previously completed baseline scores before TSA. The ASES total score was divided into its two subcomponents: functional ability and visual analog scale (VAS) for pain. We compared preoperative and recalled scores for each subcomponent and the total ASES score. Recalled ASES function scores were comparable to corresponding preoperative scores across all time points (analysis of variance, P = .21), but recalled VAS pain was significantly higher at all time points beyond 6 weeks after surgery (P = .0001 at 3 months; P = .005 at 6 months; and P = .001 at 12 months). As a result, the ASES total score was only comparable at 6 weeks after surgery (P = .39) and differed at all time points thereafter. Patients are able to recall preoperative function with considerable accuracy for up to 12 months after TSA. However, beyond 6 weeks postoperatively, patients recall having worse pain than they originally reported, and recalled ASES total scores are unreliable as a result. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
Nedrud, John G; Bagheri, Nayer; Schön, Karin; Xin, Wei; Bergroth, Hilda; Eliasson, Dubravka Grdic; Lycke, Nils Y
2013-01-01
A mucosal vaccine against Helicobacter pylori infection could help prevent gastric cancers and peptic ulcers. While previous attempts to develop such a vaccine have largely failed because of the requirement for safe and effective adjuvants or large amounts of well defined antigens, we have taken a unique approach to combining our strong mucosal CTA1-DD adjuvant with selected peptides from urease B (UreB). The protective efficacy of the selected peptides together with cholera toxin (CT) was first confirmed. However, CT is a strong adjuvant that unfortunately is precluded from clinical use because of its toxicity. To circumvent this problem we have developed a derivative of CT, the CTA1-DD adjuvant, that has been found safe in non-human primates and equally effective compared to CT when used intranasally. We genetically fused the selected peptides into the CTA1-DD plasmid and found after intranasal immunizations of Balb/c mice using purified CTA1-DD with 3 copies of an H. pylori urease T cell epitope (CTA1-UreB3T-DD) that significant protection was stimulated against a live challenge infection. Protection was, however, weaker than with the gold standard, bacterial lysate+CT, but considering that we only used a single epitope in nanomolar amounts the results convey optimism. Protection was associated with enhanced Th1 and Th17 immunity, but immunizations in IL-17A-deficient mice revealed that IL-17 may not be essential for protection. Taken together, we have provided evidence for the rational design of an effective mucosal subcomponent vaccine against H. pylori infection based on well selected protective epitopes from relevant antigens incorporated into the CTA1-DD adjuvant platform.
Nedrud, John G.; Bagheri, Nayer; Schön, Karin; Xin, Wei; Bergroth, Hilda; Eliasson, Dubravka Grdic; Lycke, Nils Y.
2013-01-01
A mucosal vaccine against Helicobacter pylori infection could help prevent gastric cancers and peptic ulcers. While previous attempts to develop such a vaccine have largely failed because of the requirement for safe and effective adjuvants or large amounts of well defined antigens, we have taken a unique approach to combining our strong mucosal CTA1-DD adjuvant with selected peptides from urease B (UreB). The protective efficacy of the selected peptides together with cholera toxin (CT) was first confirmed. However, CT is a strong adjuvant that unfortunately is precluded from clinical use because of its toxicity. To circumvent this problem we have developed a derivative of CT, the CTA1-DD adjuvant, that has been found safe in non-human primates and equally effective compared to CT when used intranasally. We genetically fused the selected peptides into the CTA1-DD plasmid and found after intranasal immunizations of Balb/c mice using purified CTA1-DD with 3 copies of an H. pylori urease T cell epitope (CTA1-UreB3T-DD) that significant protection was stimulated against a live challenge infection. Protection was, however, weaker than with the gold standard, bacterial lysate+CT, but considering that we only used a single epitope in nanomolar amounts the results convey optimism. Protection was associated with enhanced Th1 and Th17 immunity, but immunizations in IL-17A-deficient mice revealed that IL-17 may not be essential for protection. Taken together, we have provided evidence for the rational design of an effective mucosal subcomponent vaccine against H. pylori infection based on well selected protective epitopes from relevant antigens incorporated into the CTA1-DD adjuvant platform. PMID:24391754
Morojele, Neo K; Kitleli, Naledi; Ngako, Kgalabi; Kekwaletswe, Connie T; Nkosi, Sebenzile; Fritz, Katherine; Parry, Charles D H
2014-01-01
Alcohol consumption is a recognised risk factor for HIV infection. Alcohol serving establishments have been identified as appropriate venues in which to deliver HIV prevention interventions. This paper describes experiences and lessons learnt from implementing a combined HIV prevention intervention in bar settings in one city- and one township-based bar in Tshwane, South Africa. The intervention consisted of peer-led and brief intervention counselling sub-components. Thirty-nine bar patrons were recruited and trained, and delivered HIV and alcohol risk reduction activities to their peers as peer interventionists. At the same time, nine counsellors received training and visited the bars weekly to provide brief motivational interviewing counselling, advice, and referrals to the patrons of the bars. A responsible server sub-component that had also been planned was not delivered as it was not feasible to train the staff in the two participating bars. Over the eight-month period the counsellors were approached by and provided advice and counselling for alcohol and sexual risk-related problems to 111 bar patrons. The peer interventionists reported 1323 risk reduction interactions with their fellow bar patrons during the same period. The intervention was overall well received and suggests that bar patrons and servers can accept a myriad of intervention activities to reduce sexual risk behaviour within their drinking settings. However, HIV- and AIDS-related stigma hindered participation in certain intervention activities in some instances. The buy-in that we received from the relevant stakeholders (i.e. bar owners/managers and patrons, and the community at large) was an important contributor to the feasibility and acceptability of the intervention.
Olson, Sheryl L.; Sameroff, Arnold J.; Lansford, Jennifer E.; Sexton, Holly; Davis-Kean, Pamela; Bates, John E.; Pettit, Gregory S.; Dodge, Kenneth A.
2013-01-01
The purpose of this study was to determine whether five subcomponents of children's externalizing behavior showed distinctive patterns of long-term growth and predictive correlates. We examined growth in teachers' ratings of overt aggression, covert aggression, oppositional defiance, impulsivity/inattention, and emotion dysregulation across three developmental periods spanning kindergarten through Grade 8 (ages 5–13 years). We also determined whether three salient background characteristics, family socioeconomic status, child ethnicity, and child gender, differentially predicted growth in discrete categories of child externalizing symptoms across development. Participants were 543 kindergarten-age children (52% male, 81% European American, 17% African American) whose problem behaviors were rated by teachers each successive year of development through Grade 8. Latent growth curve analyses were performed for each component scale, contrasting with overall externalizing, in a piecewise fashion encompassing three developmental periods: kindergarten–Grade 2, Grades 3–5, and Grades 6–8. We found that most subconstructs of externalizing behavior increased significantly across the early school age period relative to middle childhood and early adolescence. However, overt aggression did not show early positive growth, and emotion dysregulation significantly increased across middle childhood. Advantages of using subscales were most clear in relation to illustrating different growth functions between the discrete developmental periods. Moreover, growth in some discrete subcomponents was differentially associated with variations in family socioeconomic status and ethnicity. Our findings strongly affirmed the necessity of adopting a developmental approach to the analysis of growth in children's externalizing behavior and provided unique data concerning similarities and differences in growth between subconstructs of child and adolescent externalizing behavior. PMID:23880394
Shi, Haojun; Fang, Winston; Liu, Minda; Fu, Deliang
2017-10-01
Pancreatic cancer shows a remarkable predilection for hepatic metastasis. Complement component 1, q subcomponent binding protein (C1QBP) can mediate growth factor-induced cancer cell chemotaxis and distant metastasis by activation of receptor tyrosine kinases. Coincidentally, insulin-like growth factor-1 (IGF-1) derived from the liver and cancer cells itself has been recognized as a critical inducer of hepatic metastasis. However, the mechanism underlying IGF-1-dependent hepatic metastasis of pancreatic cancer, in which C1QBP may be involved, remains unknown. In the study, we demonstrated a significant association between C1QBP expression and hepatic metastasis in patients with pancreatic cancer. IGF-1 induced the translocation of C1QBP from cytoplasm to lipid rafts and further drove the formation of CD44 variant 6 (CD44v6)/C1QBP complex in pancreatic cancer cells. C1QBP interacting with CD44v6 in lipid rafts promoted phosphorylation of IGF-1R and thus activated downstream PI3K and MAPK signaling pathways which mediated metastatic potential of pancreatic cancer cells including proliferation, apoptosis, invasion, adhesion and energy metabolism. Furthermore, C1QBP knockdown suppressed hepatic metastasis of pancreatic cancer cells in nude mice. We therefore conclude that C1QBP in lipid rafts serves a key regulator of IGF-1/IGF-1R-induced hepatic metastasis from pancreatic cancer. Our findings about C1QBP in lipid rafts provide a novel strategy to block IGF-1/IGF-1R signaling in pancreatic cancer and a reliable premise for more efficient combined modality therapies. © 2017 UICC.
Working memory span capacity improved by a D2 but not D1 receptor family agonist.
Tarantino, Isadore S; Sharp, Richard F; Geyer, Mark A; Meves, Jessica M; Young, Jared W
2011-06-01
Patients with schizophrenia exhibit poor working memory (WM). Although several subcomponents of WM can be measured, evidence suggests the primary subcomponent affected in schizophrenia is span capacity (WMC). Indeed, the NIMH-funded MATRICS initiative recommended assaying the WMC when assessing the efficacy of a putative therapeutic for FDA approval. Although dopamine D1 receptor agonists improve delay-dependent memory in animals, evidence for improvements in WMC due to dopamine D1 receptor activation is limited. In contrast, the dopamine D2-family agonist bromocriptine improves WMC in humans. The radial arm maze (RAM) can be used to assess WMC, although complications due to ceiling effects or strategy confounds have limited its use. We describe a 12-arm RAM protocol designed to assess whether the dopamine D1-family agonist SKF 38393 (0, 1, 3, and 10 mg/kg) or bromocriptine (0, 1, 3, and 10 mg/kg) could improve WMC in C57BL/6N mice (n=12) in cross-over designs. WMC increased and strategy usage decreased with training. The dopamine D1 agonist SKF 38393 had no effect on WMC or long-term memory. Bromocriptine decreased WMC errors, without affecting long-term memory, consistent with human studies. These data confirm that WMC can be measured in mice and reveal drug effects that are consistent with reported effects in humans. Future research is warranted to identify the subtype of the D2-family of receptors responsible for the observed improvement in WMC. Finally, this RAM procedure may prove useful in developing animal models of deficient WMC to further assess putative treatments for the cognitive deficits in schizophrenia. Copyright © 2011 Elsevier B.V. All rights reserved.
Entirely soft dielectric elastomer robots
NASA Astrophysics Data System (ADS)
Henke, E.-F. Markus; Wilson, Katherine E.; Anderson, Iain A.
2017-04-01
Multifunctional Dielectric Elastomer (DE) devices are well established as actuators, sensors and energy har- vesters. Since the invention of the Dielectric Elastomer Switch (DES), a piezoresistive electrode that can directly switch charge on and off, it has become possible to expand the wide functionality of DE structures even more. We show the application of fully soft DE subcomponents in biomimetic robotic structures. It is now possible to couple arrays of actuator/switch units together so that they switch charge between them- selves on and off. One can then build DE devices that operate as self-controlled oscillators. With an oscillator one can produce a periodic signal that controls a soft DE robot - a DE device with its own DE nervous system. DESs were fabricated using a special electrode mixture, and imprinting technology at an exact pre-strain. We have demonstrated six orders of magnitude change in conductivity within the DES over 50% strain. The control signal can either be a mechanical deformation from another DE or an electrical input to a connected dielectric elastomer actuator (DEA). We have demonstrated a variety of fully soft multifunctional subcomponents that enable the design of autonomous soft robots without conventional electronics. The combination of digital logic structures for basic signal processing, data storage in dielectric elastomer flip-flops and digital and analogue clocks with adjustable frequencies, made of dielectric elastomer oscillators (DEOs), enables fully soft, self-controlled and electronics-free robotic structures. DE robotic structures to date include stiff frames to maintain necessary pre-strains enabling sufficient actuation of DEAs. Here we present a design and production technology for a first robotic structure consisting only of soft silicones and carbon black.
Makarem, Nour; Lin, Yong; Bandera, Elisa V; Jacques, Paul F; Parekh, Niyati
2015-02-01
This prospective cohort study evaluates associations between healthful behaviors consistent with WCRF/AICR cancer prevention guidelines and obesity-related cancer risk, as a third of cancers are estimated to be preventable. The study sample consisted of adults from the Framingham Offspring cohort (n = 2,983). From 1991 to 2008, 480 incident doctor-diagnosed obesity-related cancers were identified. Data on diet, measured by a food frequency questionnaire, anthropometric measures, and self-reported physical activity, collected in 1991 was used to construct a 7-component score based on recommendations for body fatness, physical activity, foods that promote weight gain, plant foods, animal foods, alcohol, and food preservation, processing, and preparation. Multivariable Cox regression models were used to estimate associations between the computed score, its components, and subcomponents in relation to obesity-related cancer risk. The overall score was not associated with obesity-related cancer risk after adjusting for age, sex, smoking, energy, and preexisting conditions (HR 0.94, 95 % CI 0.86-1.02). When score components were evaluated separately, for every unit increment in the alcohol score, there was 29 % lower risk of obesity-related cancers (HR 0.71, 95 % CI 0.51-0.99) and 49-71 % reduced risk of breast, prostate, and colorectal cancers. Every unit increment in the subcomponent score for non-starchy plant foods (fruits, vegetables, and legumes) among participants who consume starchy vegetables was associated with 66 % reduced risk of colorectal cancer (HR 0.44, 95 % CI 0.22-0.88). Lower alcohol consumption and a plant-based diet consistent with the cancer prevention guidelines were associated with reduced risk of obesity-related cancers in this population.
Narrow band quantitative and multivariate electroencephalogram analysis of peri-adolescent period.
Martinez, E I Rodríguez; Barriga-Paulino, C I; Zapata, M I; Chinchilla, C; López-Jiménez, A M; Gómez, C M
2012-08-24
The peri-adolescent period is a crucial developmental moment of transition from childhood to emergent adulthood. The present report analyses the differences in Power Spectrum (PS) of the Electroencephalogram (EEG) between late childhood (24 children between 8 and 13 years old) and young adulthood (24 young adults between 18 and 23 years old). The narrow band analysis of the Electroencephalogram was computed in the frequency range of 0-20 Hz. The analysis of mean and variance suggested that six frequency ranges presented a different rate of maturation at these ages, namely: low delta, delta-theta, low alpha, high alpha, low beta and high beta. For most of these bands the maturation seems to occur later in anterior sites than posterior sites. Correlational analysis showed a lower pattern of correlation between different frequencies in children than in young adults, suggesting a certain asynchrony in the maturation of different rhythms. The topographical analysis revealed similar topographies of the different rhythms in children and young adults. Principal Component Analysis (PCA) demonstrated the same internal structure for the Electroencephalogram of both age groups. Principal Component Analysis allowed to separate four subcomponents in the alpha range. All these subcomponents peaked at a lower frequency in children than in young adults. The present approaches complement and solve some of the incertitudes when the classical brain broad rhythm analysis is applied. Children have a higher absolute power than young adults for frequency ranges between 0-20 Hz, the correlation of Power Spectrum (PS) with age and the variance age comparison showed that there are six ranges of frequencies that can distinguish the level of EEG maturation in children and adults. The establishment of maturational order of different frequencies and its possible maturational interdependence would require a complete series including all the different ages.
Anema, Aranka; Fielden, Sarah J; Shurgold, Susan; Ding, Erin; Messina, Jennifer; Jones, Jennifer E; Chittock, Brian; Monteith, Ken; Globerman, Jason; Rourke, Sean B; Hogg, Robert S
2016-01-01
People living with HIV in high-resource settings suffer severe levels of food insecurity; however, limited evidence exists regarding dietary intake and sub-components that characterize food insecurity (i.e. food quantity, quality, safety or procurement) in this population. We examined the prevalence and characteristics of food insecurity among people living with HIV across British Columbia, Canada. This cross-sectional analysis was conducted within a national community-based research initiative. Food security was measured using the Health Canada Household Food Security Scale Module. Logistic regression was used to determine key independent predictors of food insecurity, controlling for potential confounders. Of 262 participants, 192 (73%) reported food insecurity. Sub-components associated with food insecurity in bivariate analysis included: < RDI consumption of protein (p = 0.046); being sick from spoiled/unsafe food in the past six months (p = 0.010); and procurement of food using non-traditional methods (p <0.05). In multivariable analyses, factors significantly associated with food insecurity included: procurement of food using non-traditional methods [AOR = 11.11, 95% CI: 4.79-25.68, p = <0.001]; younger age [AOR = 0.92, 95% CI: 0.86-0.96, p = <0.001]; unstable housing [AOR = 4.46, 95% CI: 1.15-17.36, p = 0.031]; household gross annual income [AOR = 4.49, 95% CI: 1.74-11.60, p = 0.002]; and symptoms of depression [AOR = 2.73, 95% CI: 1.25-5.96, p = 0.012]. Food insecurity among people living with HIV in British Columbia is characterized by poor dietary quality and food procurement methods. Notably, participants who reported procuring in non-traditional manners were over 10 times more likely to be food insecure. These findings suggest a need for tailored food security and social support interventions in this setting.
Baldo, Brian A.; Pratt, Wayne E.; Will, Matthew J.; Hanlon, Erin C.; Bakshi, Vaishali P.; Cador, Martine
2013-01-01
Circuits that participate in specific subcomponents of feeding (e.g., gustatory perception, peripheral feedback relevant to satiety and energy balance, reward coding, etc.) are found at all levels of the neural axis. Further complexity is conferred by the wide variety of feeding-modulatory neurotransmitters and neuropeptides that act within these circuits. An ongoing challenge has been to refine the understanding of the functional specificity of these neurotransmitters and circuits, and there have been exciting advances in recent years. We focus here on foundational work of Dr. Ann Kelley that identified distinguishable actions of striatal opioid peptide modulation and dopamine transmission in subcomponents of reward processing. We also discuss her work in overlaying these neuropharmacological effects upon anatomical pathways that link the telencephalon (cortex and basal ganglia) with feeding-control circuits in the hypothalamus. Using these seminal contributions as a starting point, we will discuss new findings that expand our understanding of (1) the specific, differentiable motivational processes that are governed by central dopamine and opioid transmission, (2) the manner in which other striatal neuromodulators, specifically acetylcholine, endocannabinoids and adenosine, modulate these motivational processes (including via interactions with opioid systems), and (3) the organization of the cortical-subcortical network that subserves opioid-driven feeding. The findings discussed here strengthen the view that incentive-motivational properties of food are coded by substrates and neural circuits that are distinguishable from those that mediate the acute hedonic experience of food reward. Striatal opioid transmission modulates reward processing by engaging frontotemporal circuits, possibly via a hypothalamic-thalamic axis, that ultimately impinges upon hypothalamic modules dedicated to autonomic function and motor pattern control. We will conclude by discussing implications for understanding disorders of “non-homeostatic” feeding. PMID:23466532
Racial/Ethnic Disparity in NICU Quality of Care Delivery.
Profit, Jochen; Gould, Jeffrey B; Bennett, Mihoko; Goldstein, Benjamin A; Draper, David; Phibbs, Ciaran S; Lee, Henry C
2017-09-01
Differences in NICU quality of care provided to very low birth weight (<1500 g) infants may contribute to the persistence of racial and/or ethnic disparity. An examination of such disparities in a population-based sample across multiple dimensions of care and outcomes is lacking. Prospective observational analysis of 18 616 very low birth weight infants in 134 California NICUs between January 1, 2010, and December 31, 2014. We assessed quality of care via the Baby-MONITOR, a composite indicator consisting of 9 process and outcome measures of quality. For each NICU, we calculated a risk-adjusted composite and individual component quality score for each race and/or ethnicity. We standardized each score to the overall population to compare quality of care between and within NICUs. We found clinically and statistically significant racial and/or ethnic variation in quality of care between NICUs as well as within NICUs. Composite quality scores ranged by 5.26 standard units (range: -2.30 to 2.96). Adjustment of Baby-MONITOR scores by race and/or ethnicity had only minimal effect on comparative assessments of NICU performance. Among subcomponents of the Baby-MONITOR, non-Hispanic white infants scored higher on measures of process compared with African Americans and Hispanics. Compared with whites, African Americans scored higher on measures of outcome; Hispanics scored lower on 7 of the 9 Baby-MONITOR subcomponents. Significant racial and/or ethnic variation in quality of care exists between and within NICUs. Providing feedback of disparity scores to NICUs could serve as an important starting point for promoting improvement and reducing disparities. Copyright © 2017 by the American Academy of Pediatrics.
Morojele, Neo K.; Kitleli, Naledi; Ngako, Kgalabi; Kekwaletswe, Connie T.; Nkosi, Sebenzile; Fritz, Katherine; Parry, Charles D.H.
2014-01-01
Abstract Alcohol consumption is a recognised risk factor for HIV infection. Alcohol serving establishments have been identified as appropriate venues in which to deliver HIV prevention interventions. This paper describes experiences and lessons learnt from implementing a combined HIV prevention intervention in bar settings in one city- and one township-based bar in Tshwane, South Africa. The intervention consisted of peer-led and brief intervention counselling sub-components. Thirty-nine bar patrons were recruited and trained, and delivered HIV and alcohol risk reduction activities to their peers as peer interventionists. At the same time, nine counsellors received training and visited the bars weekly to provide brief motivational interviewing counselling, advice, and referrals to the patrons of the bars. A responsible server sub-component that had also been planned was not delivered as it was not feasible to train the staff in the two participating bars. Over the eight-month period the counsellors were approached by and provided advice and counselling for alcohol and sexual risk-related problems to 111 bar patrons. The peer interventionists reported 1323 risk reduction interactions with their fellow bar patrons during the same period. The intervention was overall well received and suggests that bar patrons and servers can accept a myriad of intervention activities to reduce sexual risk behaviour within their drinking settings. However, HIV- and AIDS-related stigma hindered participation in certain intervention activities in some instances. The buy-in that we received from the relevant stakeholders (i.e. bar owners/managers and patrons, and the community at large) was an important contributor to the feasibility and acceptability of the intervention. PMID:24750106
Baldo, Brian A; Pratt, Wayne E; Will, Matthew J; Hanlon, Erin C; Bakshi, Vaishali P; Cador, Martine
2013-11-01
Circuits that participate in specific subcomponents of feeding (e.g., gustatory perception, peripheral feedback relevant to satiety and energy balance, reward coding, etc.) are found at all levels of the neural axis. Further complexity is conferred by the wide variety of feeding-modulatory neurotransmitters and neuropeptides that act within these circuits. An ongoing challenge has been to refine the understanding of the functional specificity of these neurotransmitters and circuits, and there have been exciting advances in recent years. We focus here on foundational work of Dr. Ann Kelley that identified distinguishable actions of striatal opioid peptide modulation and dopamine transmission in subcomponents of reward processing. We also discuss her work in overlaying these neuropharmacological effects upon anatomical pathways that link the telencephalon (cortex and basal ganglia) with feeding-control circuits in the hypothalamus. Using these seminal contributions as a starting point, we will discuss new findings that expand our understanding of (1) the specific, differentiable motivational processes that are governed by central dopamine and opioid transmission, (2) the manner in which other striatal neuromodulators, specifically acetylcholine, endocannabinoids and adenosine, modulate these motivational processes (including via interactions with opioid systems), and (3) the organization of the cortical-subcortical network that subserves opioid-driven feeding. The findings discussed here strengthen the view that incentive-motivational properties of food are coded by substrates and neural circuits that are distinguishable from those that mediate the acute hedonic experience of food reward. Striatal opioid transmission modulates reward processing by engaging frontotemporal circuits, possibly via a hypothalamic-thalamic axis, that ultimately impinges upon hypothalamic modules dedicated to autonomic function and motor pattern control. We will conclude by discussing implications for understanding disorders of "non-homeostatic" feeding. Copyright © 2013 Elsevier Ltd. All rights reserved.
One-Dimensional Spontaneous Raman Measurements Made in a Gas Turbine Combustor
NASA Technical Reports Server (NTRS)
DeGroot, Wilhelmus A.; Hicks, Yolanda R.; Locke, Randy J.; Anderson, Robert C.
2001-01-01
The NASA Glenn Research Center and the aerospace industry are designing and testing low-emission combustor concepts to build the next generation of cleaner, more fuel efficient aircraft powerplants. These combustors will operate at much higher inlet temperatures and at pressures that are up to 3 to 5 times greater than combustors in the current fleet. From a test and analysis viewpoint, there is an increasing need for measurements from these combustors that are nonintrusive, simultaneous, multipoint, and more quantitative. Glenn researchers have developed several unique test facilities (refs. 1 and 2) that allow, for the first time, optical interrogation of combustor flow fields, including subcomponent performance, at pressures ranging from 1 to 60 bar (1 to 60 atm). Experiments conducted at Glenn are the first application of a visible laser-pumped, one-dimensional, spontaneous Raman-scattering technique to analyze the flow in a high-pressure, advanced-concept fuel injector at pressures thus far reaching 12 bar (12 atm). This technique offers a complementary method to the existing two- and three-dimensional imaging methods used, such as planar laser-induced fluorescence. Raman measurements benefit from the fact that the signal from each species is a linear function of its density, and the relative densities of all major species can be acquired simultaneously with good precision. The Raman method has the added potential to calibrate multidimensional measurements by providing an independent measurement of species number-densities at known points within the planar laser-induced fluorescence images. The visible Raman method is similar to an ultraviolet-Raman technique first tried in the same test facility (ref. 3). However, the visible method did not suffer from the ultraviolet technique's fuel-born polycyclic aromatic hydrocarbon fluorescence interferences.
The Role of Cognitive Factors in Predicting Balance and Fall Risk in a Neuro-Rehabilitation Setting.
Saverino, A; Waller, D; Rantell, K; Parry, R; Moriarty, A; Playford, E D
2016-01-01
There is a consistent body of evidence supporting the role of cognitive functions, particularly executive function, in the elderly and in neurological conditions which become more frequent with ageing. The aim of our study was to assess the role of different domains of cognitive functions to predict balance and fall risk in a sample of adults with various neurological conditions in a rehabilitation setting. This was a prospective, cohort study conducted in a single centre in the UK. 114 participants consecutively admitted to a Neuro-Rehabilitation Unit were prospectively assessed for fall accidents. Baseline assessment included a measure of balance (Berg Balance Scale) and a battery of standard cognitive tests measuring executive function, speed of information processing, verbal and visual memory, visual perception and intellectual function. The outcomes of interest were the risk of becoming a faller, balance and fall rate. Two tests of executive function were significantly associated with fall risk, the Stroop Colour Word Test (IRR 1.01, 95% CI 1.00-1.03) and the number of errors on part B of the Trail Making Test (IRR 1.23, 95% CI 1.03-1.49). Composite scores of executive function, speed of information processing and visual memory domains resulted in 2 to 3 times increased likelihood of having better balance (OR 2.74 95% CI 1.08 to 6.94, OR 2.72 95% CI 1.16 to 6.36 and OR 2.44 95% CI 1.11 to 5.35 respectively). Our results show that specific subcomponents of executive functions are able to predict fall risk, while a more global cognitive dysfunction is associated with poorer balance.
The Role of Cognitive Factors in Predicting Balance and Fall Risk in a Neuro-Rehabilitation Setting
Saverino, A.; Waller, D.; Rantell, K.; Parry, R.; Moriarty, A.; Playford, E. D.
2016-01-01
Introduction There is a consistent body of evidence supporting the role of cognitive functions, particularly executive function, in the elderly and in neurological conditions which become more frequent with ageing. The aim of our study was to assess the role of different domains of cognitive functions to predict balance and fall risk in a sample of adults with various neurological conditions in a rehabilitation setting. Methods This was a prospective, cohort study conducted in a single centre in the UK. 114 participants consecutively admitted to a Neuro-Rehabilitation Unit were prospectively assessed for fall accidents. Baseline assessment included a measure of balance (Berg Balance Scale) and a battery of standard cognitive tests measuring executive function, speed of information processing, verbal and visual memory, visual perception and intellectual function. The outcomes of interest were the risk of becoming a faller, balance and fall rate. Results Two tests of executive function were significantly associated with fall risk, the Stroop Colour Word Test (IRR 1.01, 95% CI 1.00–1.03) and the number of errors on part B of the Trail Making Test (IRR 1.23, 95% CI 1.03–1.49). Composite scores of executive function, speed of information processing and visual memory domains resulted in 2 to 3 times increased likelihood of having better balance (OR 2.74 95% CI 1.08 to 6.94, OR 2.72 95% CI 1.16 to 6.36 and OR 2.44 95% CI 1.11 to 5.35 respectively). Conclusions Our results show that specific subcomponents of executive functions are able to predict fall risk, while a more global cognitive dysfunction is associated with poorer balance. PMID:27115880
Chemical fractionation-enhanced structural characterization of marine dissolved organic matter
NASA Astrophysics Data System (ADS)
Arakawa, N.; Aluwihare, L.
2016-02-01
Describing the molecular fingerprint of dissolved organic matter (DOM) requires sample processing methods and separation techniques that can adequately minimize its complexity. We have employed acid hydrolysis as a way to make the subcomponents of marine solid phase-extracted (PPL) DOM more accessible to analytical techniques. Using a combination of NMR and chemical derivatization or reduction analyzed by comprehensive (GCxGC) gas chromatography, we observed chemical features strikingly similar to terrestrial DOM. In particular, we observed reduced alicylic hydrocarbons believed to be the backbone of previously identified carboxylic rich alicyclic material (CRAM). Additionally, we found carbohydrates, amino acids and small lipids and acids.
Construct Validation of the Physics Metacognition Inventory
NASA Astrophysics Data System (ADS)
Taasoobshirazi, Gita; Farley, John
2013-02-01
The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. An exploratory factor analysis provided evidence of construct validity, revealing six components of students' metacognition when solving physics problems including: knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. Although women and men differed on the components, they had equivalent overall metacognition for problem solving. The implications of these findings for future research are discussed.
Recent Trends in Fusion Gyrotron Development at KIT
NASA Astrophysics Data System (ADS)
Gantenbein, G.; Avramidis, K.; Franck, J.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Jelonnek, J.; Kalaria, P.; Pagonakis, I. Gr.; Ruess, S.; Rzesnicki, T.; Thumm, M.; Wu, C.
2017-10-01
ECRH&CD is one of the favorite heating system for magnetically confined nuclear fusion plasmas. KIT is strongly involved in the development of high power gyrotrons for use in ECRH systems for nuclear fusion. KIT is upgrading the sub-components of the existing 2 MW, 170 GHz coaxial-cavity short-pulse gyrotron to support long-pulse operation up to 1 s, all components will be equipped with a specific active cooling system. Two important developments for future high power, highly efficient gyrotrons will be discussed: design of gyrotrons with high operating frequency (˜ 240 GHz) and efficiency enhancement by using advanced collector designs with multi-staged voltage depression.
Design concepts for low-cost composite engine frames
NASA Technical Reports Server (NTRS)
Chamis, C. C.
1983-01-01
Design concepts for low-cost, lightweight composite engine frames were applied to the design requirements for the frame of commercial, high-bypass turbine engines. The concepts consist of generic-type components and subcomponents that could be adapted for use in different locations in the engine and to different engine sizes. A variety of materials and manufacturing methods were assessed with a goal of having the lowest number of parts possible at the lowest possible cost. The evaluation of the design concepts resulted in the identification of a hybrid composite frame which would weigh about 70 percent of the state-of-the-art metal frame and cost would be about 60 percent.
A study on the effectiveness of task manager board game as a training tool in managing project
NASA Astrophysics Data System (ADS)
Yusof, Shahrul Azmi Mohd; Radzi, Shanizan Herman Md; Din, Sharifah Nadera Syed; Khalid, Nurhafizah
2016-08-01
Nowadays, games have become one of the useful tools in training. Many instructors choose to use games to enhance the way of delivering the subject. Failure to apply the suitable tool in training will lead to discouragement in learning and causing waste to the resources. An effective game will help the student understand the concept quickly. It can also help students to get involve in experiential learning where the student can manage and solve the problem as in the actual situation. This study will focus on the effectiveness of board game as a training tool for managing projects. This game has 4 tasks to be completed by students. They will be divided into a group of 4 or 5. Two methods are used in this study, pilot test, and post-test. These methods are chosen to analyze the effectiveness of using Task Manager Board Game as a teaching tool and the improvement of student's knowledge in project management. Three sub-components assessed were motivation, user experience and learning using case studies on Kirkpatrick's level one base on the perception of the students. The result indicated that the use of Task Manager board game as a training tool for managing project has a positive impact on students. It helps students to experience the situation of managing projects. It is one of the easiest ways for improving time management, human resources and communication skill.
Karimpoor, Mahta; Churchill, Nathan W.; Tam, Fred; Fischer, Corinne E.; Schweizer, Tom A.; Graham, Simon J.
2018-01-01
Handwriting is a complex human activity that engages a blend of cognitive and visual motor skills. Current understanding of the neural correlates of handwriting has largely come from lesion studies of patients with impaired handwriting. Task-based fMRI studies would be useful to supplement this work. To address concerns over ecological validity, previously we developed a fMRI-compatible, computerized tablet system for writing and drawing including visual feedback of hand position and an augmented reality display. The purpose of the present work is to use the tablet system in proof-of-concept to characterize brain activity associated with clinically relevant handwriting tasks, originally developed to characterize handwriting impairments in Alzheimer’s disease patients. As a prelude to undertaking fMRI studies of patients, imaging was performed of twelve young healthy subjects who copied sentences, phone numbers, and grocery lists using the fMRI-compatible tablet. Activation maps for all handwriting tasks consisted of a distributed network of regions in reasonable agreement with previous studies of handwriting performance. In addition, differences in brain activity were observed between the test subcomponents consistent with different demands of neural processing for successful task performance, as identified by investigating three quantitative behavioral metrics (writing speed, stylus contact force and stylus in air time). This study provides baseline behavioral and brain activity results for fMRI studies that adopt this handwriting test to characterize patients with brain impairments. PMID:29487511
Description and evaluation of the Earth System Regional Climate Model (RegCM-ES)
NASA Astrophysics Data System (ADS)
Farneti, Riccardo; Sitz, Lina; Di Sante, Fabio; Fuentes-Franco, Ramon; Coppola, Erika; Mariotti, Laura; Reale, Marco; Sannino, Gianmaria; Barreiro, Marcelo; Nogherotto, Rita; Giuliani, Graziano; Graffino, Giorgio; Solidoro, Cosimo; Giorgi, Filippo
2017-04-01
The increasing availability of satellite remote sensing data, of high temporal frequency and spatial resolution, has provided a new and enhanced view of the global ocean and atmosphere, revealing strong air-sea coupling processes throughout the ocean basins. In order to obtain an accurate representation and better understanding of the climate system, its variability and change, the inclusion of all mechanisms of interaction among the different sub-components, at high temporal and spatial resolution, becomes ever more desirable. Recently, global coupled models have been able to progressively refine their horizontal resolution to attempt to resolve smaller-scale processes. However, regional coupled ocean-atmosphere models can achieve even finer resolutions and provide additional information on the mechanisms of air-sea interactions and feedbacks. Here we describe a new, state-of-the-art, Earth System Regional Climate Model (RegCM-ES). RegCM-ES presently includes the coupling between atmosphere, ocean, land surface and sea-ice components, as well as an hydrological and ocean biogeochemistry model. The regional coupled model has been implemented and tested over some of the COordinated Regional climate Downscaling Experiment (CORDEX) domains. RegCM-ES has shown improvements in the representation of precipitation and SST fields over the tested domains, as well as realistic representations of coupled air-sea processes and interactions. The RegCM-ES model, which can be easily implemented over any regional domain of interest, is open source making it suitable for usage by the large scientific community.
Structural Analysis for the American Airlines Flight 587 Accident Investigation: Global Analysis
NASA Technical Reports Server (NTRS)
Young, Richard D.; Lovejoy, Andrew E.; Hilburger, Mark W.; Moore, David F.
2005-01-01
NASA Langley Research Center (LaRC) supported the National Transportation Safety Board (NTSB) in the American Airlines Flight 587 accident investigation due to LaRC's expertise in high-fidelity structural analysis and testing of composite structures and materials. A Global Analysis Team from LaRC reviewed the manufacturer s design and certification procedures, developed finite element models and conducted structural analyses, and participated jointly with the NTSB and Airbus in subcomponent tests conducted at Airbus in Hamburg, Germany. The Global Analysis Team identified no significant or obvious deficiencies in the Airbus certification and design methods. Analysis results from the LaRC team indicated that the most-likely failure scenario was failure initiation at the right rear main attachment fitting (lug), followed by an unstable progression of failure of all fin-to-fuselage attachments and separation of the VTP from the aircraft. Additionally, analysis results indicated that failure initiates at the final observed maximum fin loading condition in the accident, when the VTP was subjected to loads that were at minimum 1.92 times the design limit load condition for certification. For certification, the VTP is only required to support loads of 1.5 times design limit load without catastrophic failure. The maximum loading during the accident was shown to significantly exceed the certification requirement. Thus, the structure appeared to perform in a manner consistent with its design and certification, and failure is attributed to VTP loads greater than expected.
Karimpoor, Mahta; Churchill, Nathan W; Tam, Fred; Fischer, Corinne E; Schweizer, Tom A; Graham, Simon J
2018-01-01
Handwriting is a complex human activity that engages a blend of cognitive and visual motor skills. Current understanding of the neural correlates of handwriting has largely come from lesion studies of patients with impaired handwriting. Task-based fMRI studies would be useful to supplement this work. To address concerns over ecological validity, previously we developed a fMRI-compatible, computerized tablet system for writing and drawing including visual feedback of hand position and an augmented reality display. The purpose of the present work is to use the tablet system in proof-of-concept to characterize brain activity associated with clinically relevant handwriting tasks, originally developed to characterize handwriting impairments in Alzheimer's disease patients. As a prelude to undertaking fMRI studies of patients, imaging was performed of twelve young healthy subjects who copied sentences, phone numbers, and grocery lists using the fMRI-compatible tablet. Activation maps for all handwriting tasks consisted of a distributed network of regions in reasonable agreement with previous studies of handwriting performance. In addition, differences in brain activity were observed between the test subcomponents consistent with different demands of neural processing for successful task performance, as identified by investigating three quantitative behavioral metrics (writing speed, stylus contact force and stylus in air time). This study provides baseline behavioral and brain activity results for fMRI studies that adopt this handwriting test to characterize patients with brain impairments.
NASA Astrophysics Data System (ADS)
Ammann, C. M.; Holland, M. M.
2016-12-01
The Arctic is undergoing an exceptionally rapid transformation. Trying to predict or project the consequences of this change is pushing nearly every discipline in the physical, biogeochemical and social sciences towards the limits of their current understanding. Adequate data is missing to test and validate models for capturing a state of the Arctic system that we have not observed. But even more challenging is the systems-level evaluation, where impacts can quickly lead to unexpected outcomes with cascading repercussions throughout the different components and subcomponents of the environment. One approach to test our understanding, and to expose gaps in current observation strategies, modeling approaches as well as planning tools (e.g., forecast workflows, or decision frameworks) is to carefully design a small number of coordinated scenarios of plausible future states of the system, and then to study their diverse, potential impacts. A coordination of the scenarios is essential so that all disciplinary perspectives can be arranged around a common state, assumptions can be aligned, and a transdisciplinary conversation can be advanced from a common platform to form a comprehensive assessment of our knowledge. This presentation is a call to the community to join and assist the SEARCH program in designing effective scenarios that can be used for cross-cutting investigation of current limitations in our scientific understanding of how the Arctic environment might change, and what consequences these changes might bring to the physical, biological and social environments.
Towards a theory of individual differences in statistical learning
Bogaerts, Louisa; Christiansen, Morten H.; Frost, Ram
2017-01-01
In recent years, statistical learning (SL) research has seen a growing interest in tracking individual performance in SL tasks, mainly as a predictor of linguistic abilities. We review studies from this line of research and outline three presuppositions underlying the experimental approach they employ: (i) that SL is a unified theoretical construct; (ii) that current SL tasks are interchangeable, and equally valid for assessing SL ability; and (iii) that performance in the standard forced-choice test in the task is a good proxy of SL ability. We argue that these three critical presuppositions are subject to a number of theoretical and empirical issues. First, SL shows patterns of modality- and informational-specificity, suggesting that SL cannot be treated as a unified construct. Second, different SL tasks may tap into separate sub-components of SL that are not necessarily interchangeable. Third, the commonly used forced-choice tests in most SL tasks are subject to inherent limitations and confounds. As a first step, we offer a methodological approach that explicitly spells out a potential set of different SL dimensions, allowing for better transparency in choosing a specific SL task as a predictor of a given linguistic outcome. We then offer possible methodological solutions for better tracking and measuring SL ability. Taken together, these discussions provide a novel theoretical and methodological approach for assessing individual differences in SL, with clear testable predictions. This article is part of the themed issue ‘New frontiers for statistical learning in the cognitive sciences’. PMID:27872377
von Berens, Å; Cederholm, T; Fielding, R A; Gustafsson, T; Kirn, D; Laussen, J; Nydahl, M; Travison, T G; Reid, K; Koochek, A
2018-01-01
To examine the potential association between serum 25(OH) vitamin D and the performance on the Short Physical Performance Battery (SPPB) including the sub-components; five repeated chair stands test, 4 meters walk test and balance in older mobility-limited community-dwelling men and women. A cross sectional study was performed in American and Swedish subjects who were examined for potential participation in a combined exercise and nutrition intervention trial. Logistic regression analysis and linear regression analyses were performed to evaluate the association for 25(OH)D with the overall score on the SBBP, chair stand, gait speed and balance. Community-dwelling (mean age 77.6 ± 5.3 years) mobility limited American (n=494) and Swedish (n=116) females (59%) and males. The SPPB (0-12 points) includes chair stand (s), gait speed (m/s) and a balance test. Mobility limitation i.e., SPPB score ≤ 9 was an inclusion criterion. A blood sample was obtained to measure serum 25(OH)vitamin D concentrations. No clear association of 25(OH)D with SPPB scores was detected either when 25(OH)D was assessed as a continuous variable or when categorized according to serum concentrations of <50, 50-75 or <75 nmol/L. However, when analyzing the relationship between 25(OH)D and seconds to perform the chair stands, a significant quadratic relationship was observed. Thus, at serum levels of 25(OH)D above 74 nmol/L, higher concentrations appeared to be advantageous for the chair stand test, whereas for serum levels below 74 nmol/L this association was not observed. This cross- sectional study lacked clear association between serum 25(OH)D and physical performance in mobility limited adults. A potentially interesting observation was that at higher serum levels of 25(OH)D a better performance on the chair stand test was indicated.
Load Diffusion in Composite Structures
NASA Technical Reports Server (NTRS)
Horgan, Cornelius O.; Simmonds, J. G.
2000-01-01
This research has been concerned with load diffusion in composite structures. Fundamental solid mechanics studies were carried out to provide a basis for assessing the complicated modeling necessary for large scale structures used by NASA. An understanding of the fundamental mechanisms of load diffusion in composite subcomponents is essential in developing primary composite structures. Analytical models of load diffusion behavior are extremely valuable in building an intuitive base for developing refined modeling strategies and assessing results from finite element analyses. The decay behavior of stresses and other field quantities provides a significant aid towards this process. The results are also amendable to parameter study with a large parameter space and should be useful in structural tailoring studies.
Stepwise Construction of Heterobimetallic Cages by an Extended Molecular Library Approach.
Hardy, Matthias; Struch, Niklas; Topić, Filip; Schnakenburg, Gregor; Rissanen, Kari; Lützen, Arne
2018-04-02
Two novel heterobimetallic complexes, a trigonal-bipyramidal and a cubic one, have been synthesized and characterized using the same C 3 -symmetric metalloligand, prepared by a simple subcomponent self-assembly strategy. Adopting the molecular library approach, we chose a mononuclear, preorganized iron(II) complex as the metalloligand capable of self-assembly into a trigonal-bipyramidal or a cubic aggregate upon coordination to cis-protected C 2 -symmetric palladium(II) or unprotected tetravalent palladium(II) ions, respectively. The trigonal-bipyramidal complex was characterized by NMR and UV-vis spectroscopy, electrospray ionization mass spectrometry (ESI-MS), and single-crystal X-ray diffraction. The cubic structure was characterized by NMR and UV-vis spectroscopy and ESI-MS.
OTV propulsion tecnology programmatic overview
NASA Astrophysics Data System (ADS)
Cooper, L. P.
1984-04-01
An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted to generic technologies which benefit all three concepts and specific technology which benefits only one of the concepts. Concept and technology definitions to identify propulsion innovations, and subcomponent research to explore and validate their potential benefits are included.
A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance
NASA Technical Reports Server (NTRS)
Kypuros, Javier A.; Melcher, Kevin J.
2003-01-01
This paper describes a dynamic model that was developed to predict changes in turbine tip clearance the radial distance between the end of a turbine blade and the abradable tip seal. The clearance is estimated by using a first principles approach to model the thermal and mechanical effects of engine operating conditions on the turbine sub-components. These effects are summed to determine the resulting clearance. The model is demonstrated via a ground idle to maximum power transient and a lapse-rate takeoff transient. Results show the model demonstrates the expected pinch point behavior. The paper concludes by identifying knowledge gaps and suggesting additional research to improve the model.
OTV propulsion tecnology programmatic overview
NASA Technical Reports Server (NTRS)
Cooper, L. P.
1984-01-01
An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted to generic technologies which benefit all three concepts and specific technology which benefits only one of the concepts. Concept and technology definitions to identify propulsion innovations, and subcomponent research to explore and validate their potential benefits are included.
Differentiating Burnout from Depression: Personality Matters!
Melchers, Martin Christoph; Plieger, Thomas; Meermann, Rolf; Reuter, Martin
2015-01-01
Stress-related affective disorders have been identified as a core health problem of the twenty-first century. In the endeavor to identify vulnerability factors, personality has been discussed as a major factor explaining and predicting disorders like depression or burnout. An unsolved question is whether there are specific personality factors allowing differentiation of burnout from depression. The present study tested the relation between one of the most prominent, biological personality theories, Cloninger’s Temperament and Character Inventory, and common measures of burnout (Maslach Burnout Inventory General) and depression (Beck Depression Inventory 2) in a sample of German employees (N = 944) and a sample of inpatients (N = 425). Although the same personality traits (harm avoidance and self-directedness) were predominantly associated with burnout and depression, there was a much stronger association to depression than to burnout in both samples. Besides, we observed specific associations between personality traits and subcomponents of burnout. Our results underline differences in the association of burnout vs. depression to personality, which may mirror differences in scope. While symptoms of depression affect all aspects of life, burnout is supposed to be specifically related to the workplace and its requirements. The much stronger association of personality to depression can be important to select appropriate therapy methods and to develop a more specified treatment for burnout in comparison to depression. PMID:26321963
NASA Technical Reports Server (NTRS)
Singh, M.
2004-01-01
Silicon carbide based advanced ceramics and fiber reinforced composites are under active consideration for use in wide variety of high temperature applications within the aeronautics, space transportation, energy, and nuclear industries. The engineering designs of ceramic and composite component require fabrication and manufacturing of large and complex shaped parts of various thicknesses. In many instances, it is more economical to build up complex shapes by joining simple geometrical shapes. In addition these components have to be joined or assembled with metallic sub-components. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing o high temperature joints in ceramic matrix composites will be presented. Silicon carbide based advanced ceramics (CVD and hot pressed), and C/SiC and SiC/SiC composites, in different shapes and sizes, have been joined using an affordable, robust ceramic joining technology (ARCJoinT). Microstructure and high temperature mechanical properties of joints in silicon carbide ceramics and CVI and melt infiltrated SiC matrix composites will,be reported. Various joint design philosophies and design issues in joining of ceramics and composites well be discussed.
Harding, D. R.; Ulreich, J.; Wittman, M. D.; ...
2017-12-06
Improving the performance of direct-drive cryogenic targets at the Omega Laser Facility requires the development of a new cryogenic system to (i) field non permeable targets with a fill tube, and (ii) provide a clean environment around the target. This capability is to demonstrate that imploding a scaled-down version of the direct-drive–ignition target for the National Ignition Facility (NIF) on the OMEGA laser will generate the hot-spot pressure that is needed for ignition; this will justify future cryogenic direct-drive experiments on the NIF. The paper describes the target, the cryogenic equipment that is being constructed to achieve this goal, andmore » the proposed target delivery process. Thermal calculations, fill-tube–based target designs, and structural/vibrational analyses are provided to demonstrate the credibility of the design. This new design will include capabilities not available (or possible) with the existing OMEGA cryogenic system, with the emphasis being to preserve a pristinely clean environment around the target, and to provide upgraded diagnostics to characterize both the ice layer and the target’s surface. The conceptual design is complete and testing of prototypes and subcomponents is underway. The rationale and capabilities of the new design are discussed.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harding, D. R.; Ulreich, J.; Wittman, M. D.
Improving the performance of direct-drive cryogenic targets at the Omega Laser Facility requires the development of a new cryogenic system to (i) field non permeable targets with a fill tube, and (ii) provide a clean environment around the target. This capability is to demonstrate that imploding a scaled-down version of the direct-drive–ignition target for the National Ignition Facility (NIF) on the OMEGA laser will generate the hot-spot pressure that is needed for ignition; this will justify future cryogenic direct-drive experiments on the NIF. The paper describes the target, the cryogenic equipment that is being constructed to achieve this goal, andmore » the proposed target delivery process. Thermal calculations, fill-tube–based target designs, and structural/vibrational analyses are provided to demonstrate the credibility of the design. This new design will include capabilities not available (or possible) with the existing OMEGA cryogenic system, with the emphasis being to preserve a pristinely clean environment around the target, and to provide upgraded diagnostics to characterize both the ice layer and the target’s surface. The conceptual design is complete and testing of prototypes and subcomponents is underway. The rationale and capabilities of the new design are discussed.« less
Chen, Yong-Quan; Hsieh, Shulan
2018-01-01
The aim of this study was to investigate if individuals with frequent internet gaming (IG) experience exhibited better or worse multitasking ability compared with those with infrequent IG experience. The individuals' multitasking abilities were measured using virtual environment multitasks, such as Edinburgh Virtual Errands Test (EVET), and conventional laboratory multitasks, such as the dual task and task switching. Seventy-two young healthy college students participated in this study. They were split into two groups based on the time spent on playing online games, as evaluated using the Internet Use Questionnaire. Each participant performed EVET, dual-task, and task-switching paradigms on a computer. The current results showed that the frequent IG group performed better on EVET compared with the infrequent IG group, but their performance on the dual-task and task-switching paradigms did not differ significantly. The results suggest that the frequent IG group exhibited better multitasking efficacy if measured using a more ecologically valid task, but not when measured using a conventional laboratory multitasking task. The differences in terms of the subcomponents of executive function measured by these task paradigms were discussed. The current results show the importance of the task effect while evaluating frequent internet gamers' multitasking ability.
3D Reconstruction of Space Objects from Multi-Views by a Visible Sensor
Zhang, Haopeng; Wei, Quanmao; Jiang, Zhiguo
2017-01-01
In this paper, a novel 3D reconstruction framework is proposed to recover the 3D structural model of a space object from its multi-view images captured by a visible sensor. Given an image sequence, this framework first estimates the relative camera poses and recovers the depths of the surface points by the structure from motion (SFM) method, then the patch-based multi-view stereo (PMVS) algorithm is utilized to generate a dense 3D point cloud. To resolve the wrong matches arising from the symmetric structure and repeated textures of space objects, a new strategy is introduced, in which images are added to SFM in imaging order. Meanwhile, a refining process exploiting the structural prior knowledge that most sub-components of artificial space objects are composed of basic geometric shapes is proposed and applied to the recovered point cloud. The proposed reconstruction framework is tested on both simulated image datasets and real image datasets. Experimental results illustrate that the recovered point cloud models of space objects are accurate and have a complete coverage of the surface. Moreover, outliers and points with severe noise are effectively filtered out by the refinement, resulting in an distinct improvement of the structure and visualization of the recovered points. PMID:28737675
Nuclear Tools For Oilfield Logging-While-Drilling Applications
NASA Astrophysics Data System (ADS)
Reijonen, Jani
2011-06-01
Schlumberger is an international oilfield service company with nearly 80,000 employees of 140 nationalities, operating globally in 80 countries. As a market leader in oilfield services, Schlumberger has developed a suite of technologies to assess the downhole environment, including, among others, electromagnetic, seismic, chemical, and nuclear measurements. In the past 10 years there has been a radical shift in the oilfield service industry from traditional wireline measurements to logging-while-drilling (LWD) analysis. For LWD measurements, the analysis is performed and the instruments are operated while the borehole is being drilled. The high temperature, high shock, and extreme vibration environment of LWD imposes stringent requirements for the devices used in these applications. This has a significant impact on the design of the components and subcomponents of a downhole tool. Another significant change in the past few years for nuclear-based oilwell logging tools is the desire to replace the sealed radioisotope sources with active, electronic ones. These active radiation sources provide great benefits compared to the isotopic sources, ranging from handling and safety to nonproliferation and well contamination issues. The challenge is to develop electronic generators that have a high degree of reliability for the entire lifetime of a downhole tool. LWD tool testing and operations are highlighted with particular emphasis on electronic radiation sources and nuclear detectors for the downhole environment.
High Thermal Conductivity Polymer Matrix Composites (PMC) for Advanced Space Radiators
NASA Technical Reports Server (NTRS)
Shin, E. Eugene; Bowman, Cheryl; Beach, Duane
2007-01-01
High temperature polymer matrix composites (PMC) reinforced with high thermal conductivity (approx. 1000 W/mK) pitch-based carbon fibers are evaluated for a facesheet/fin structure of large space radiator systems. Significant weight reductions along with improved thermal performance, structural integrity and space durability toward its metallic counterparts were envisioned. Candidate commercial resin systems including Cyanate Esters, BMIs, and polyimide were selected based on thermal capabilities and processability. PMC laminates were designed to match the thermal expansion coefficient of various metal heat pipes or tubes. Large, but thin composite panels were successfully fabricated after optimizing cure conditions. Space durability of PMC with potential degradation mechanisms was assessed by simulated thermal aging tests in high vacuum, 1-3 x 10(exp -6) torr, at three temperatures, 227 C, 277 C, and 316 C for up to one year. Nanocomposites with vapor-grown carbon nano-fibers and exfoliated graphite flakes were attempted to improve thermal conductivity (TC) and microcracking resistance. Good quality nanocomposites were fabricated and evaluated for TC and durability including radiation resistance. TC was measured in both in-plan and thru-the-thickness directions, and the effects of microcracks on TC are also being evaluated. This paper will discuss the systematic experimental approaches, various performance-durability evaluations, and current subcomponent design and fabrication/manufacturing efforts.
Application of the Statistical ICA Technique in the DANCE Data Analysis
NASA Astrophysics Data System (ADS)
Baramsai, Bayarbadrakh; Jandel, M.; Bredeweg, T. A.; Rusev, G.; Walker, C. L.; Couture, A.; Mosby, S.; Ullmann, J. L.; Dance Collaboration
2015-10-01
The Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center is used to improve our understanding of the neutron capture reaction. DANCE is a highly efficient 4 π γ-ray detector array consisting of 160 BaF2 crystals which make it an ideal tool for neutron capture experiments. The (n, γ) reaction Q-value equals to the sum energy of all γ-rays emitted in the de-excitation cascades from the excited capture state to the ground state. The total γ-ray energy is used to identify reactions on different isotopes as well as the background. However, it's challenging to identify contribution in the Esum spectra from different isotopes with the similar Q-values. Recently we have tested the applicability of modern statistical methods such as Independent Component Analysis (ICA) to identify and separate different (n, γ) reaction yields on different isotopes that are present in the target material. ICA is a recently developed computational tool for separating multidimensional data into statistically independent additive subcomponents. In this conference talk, we present some results of the application of ICA algorithms and its modification for the DANCE experimental data analysis. This research is supported by the U. S. Department of Energy, Office of Science, Nuclear Physics under the Early Career Award No. LANL20135009.
NASA Astrophysics Data System (ADS)
Su, Huaneng; Jao, Ting-Chu; Barron, Olivia; Pollet, Bruno G.; Pasupathi, Sivakumar
2014-12-01
This paper reports use of an ultrasonic-spray for producing low Pt loadings membrane electrode assemblies (MEAs) with the catalyst coated substrate (CCS) fabrication technique. The main MEA sub-components (catalyst, membrane and gas diffusion layer (GDL)) are supplied from commercial manufacturers. In this study, high temperature (HT) MEAs with phosphoric acid (PA)-doped poly(2,5-benzimidazole) (AB-PBI) membrane are fabricated and tested under 160 °C, hydrogen and air feed 100 and 250 cc min-1 and ambient pressure conditions. Four different Pt loadings (from 0.138 to 1.208 mg cm-2) are investigated in this study. The experiment data are determined by in-situ electrochemical methods such as polarization curve, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The high Pt loading MEA exhibits higher performance at high voltage operating conditions but lower performances at peak power due to the poor mass transfer. The Pt loading 0.350 mg cm-2 GDE performs the peak power density and peak cathode mass power to 0.339 W cm-2 and 0.967 W mgPt-1, respectively. This work presents impressive cathode mass power and high fuel cell performance for high temperature proton exchange membrane fuel cells (HT-PEMFCs) with low Pt loadings.
Chen, Yong-Quan
2018-01-01
The aim of this study was to investigate if individuals with frequent internet gaming (IG) experience exhibited better or worse multitasking ability compared with those with infrequent IG experience. The individuals’ multitasking abilities were measured using virtual environment multitasks, such as Edinburgh Virtual Errands Test (EVET), and conventional laboratory multitasks, such as the dual task and task switching. Seventy-two young healthy college students participated in this study. They were split into two groups based on the time spent on playing online games, as evaluated using the Internet Use Questionnaire. Each participant performed EVET, dual-task, and task-switching paradigms on a computer. The current results showed that the frequent IG group performed better on EVET compared with the infrequent IG group, but their performance on the dual-task and task-switching paradigms did not differ significantly. The results suggest that the frequent IG group exhibited better multitasking efficacy if measured using a more ecologically valid task, but not when measured using a conventional laboratory multitasking task. The differences in terms of the subcomponents of executive function measured by these task paradigms were discussed. The current results show the importance of the task effect while evaluating frequent internet gamers’ multitasking ability. PMID:29879150
[Specific learning disabilities - from DSM-IV to DSM-5].
Schulte-Körne, Gerd
2014-09-01
The publication of the DSM-5 means changes in the classification and recommendations for diagnosis of specific learning disabilities. Dyslexia and dyscalculia have been reintroduced into the DSM. Three specific learning disorders - impairment in reading, impairment in the written expression, and impairment in mathematics, described by subskills - are now part of the DSM-5. Three subcomponents of the reading disorder are expressly differentiated: word reading accuracy, reading rate, and fluency and reading comprehension. Impaired subskills of the specific learning disorder with impairment in written expression are spelling accuracy, grammar and punctuation accuracy, and clarity and organization of written expression. Four subskills are found in the mathematics disorder: number sense, memorization of arithmetic facts, accurate or fluent calculation, and accurate math reasoning. Each impaired academic domain and subskill should be recorded. A description of the severity degree was also included. The diagnosis is based on a variety of methods, including medical history, clinical interview, school report, teacher evaluation, rating scales, and psychometric tests. The IQ discrepancy criterion was abandoned, though that of age or class discrepancy criterion was retained. The application of a discrepancy is recommended by 1 to 2.5 SD. All three specific developmental disorders are common (prevalence 5 %-15 %), occur early during the first years of formal schooling, and persist into adulthood.
Reconciling large- and small-scale structure in Twin Higgs models
Prilepina, Valentina; Tsai, Yuhsin
2017-09-08
Here, we study possible extensions of the Twin Higgs model that solve the Hierarchy problem and simultaneously address problems of the large- and small-scale structures of the Universe. Besides naturally providing dark matter (DM) candidates as the lightest charged twin fermions, the twin sector contains a light photon and neutrinos, which can modify structure formation relative to the prediction from the ΛCDM paradigm. We focus on two viable scenarios. First, we study a Fraternal Twin Higgs model in which the spin-3/2 baryonmore » $$\\hat{Ω}$$~($$\\hat{b}$$$\\hat{b}$$$\\hat{b}$$) and the lepton twin tau $$\\hat{τ}$$ contribute to the dominant and subcomponent dark matter densities. A non-decoupled scattering between the twin tau and twin neutrino arising from a gauged twin lepton number symmetry provides a drag force that damps the density inhomogeneity of a dark matter subcomponent. Next, we consider the possibility of introducing a twin hydrogen atom $$\\hat{H}$$ as the dominant DM component. After recombination, a small fraction of the twin protons and leptons remains ionized during structure formation, and their scattering to twin neutrinos through a gauged U(1) B-L force provides the mechanism that damps the density inhomogeneity. Both scenarios realize the Partially Acoustic dark matter (PAcDM) scenario and explain the σ 8 discrepancy between the CMB and weak lensing results. Moreover, the self-scattering neutrino behaves as a dark fluid that enhances the size of the Hubble rate H 0 to accommodate the local measurement result while satisfying the CMB constraint. For the small-scale structure, the scattering of $$\\hat{Ω}$$ ’s and $$\\hat{H}$$’s through the twin photon exchange generates a self-interacting dark matter (SIDM) model that solves the mass deficit problem from dwarf galaxy to galaxy cluster scales. Furthermore, when varying general choices of the twin photon coupling, bounds from the dwarf galaxy and the cluster merger observations can set an upper limit on the twin electric coupling.« less
Skrede, Turid; Stavnsbo, Mette; Aadland, Eivind; Aadland, Katrine N; Anderssen, Sigmund A; Resaland, Geir K; Ekelund, Ulf
2017-06-01
Background: Cross-sectional data have suggested an inverse relation between physical activity and cardiometabolic risk factors that is independent of sedentary time. However, little is known about which subcomponent of physical activity may predict cardiometabolic risk factors in youths. Objective: We examined the independent prospective associations between objectively measured sedentary time and subcomponents of physical activity with individual and clustered cardiometabolic risk factors in healthy children aged 10 y. Design: We included 700 children (49.1% males; 50.9% females) in which sedentary time and physical activity were measured with the use of accelerometry. Systolic blood pressure, waist circumference (WC), and fasting blood sample (total cholesterol, high-density lipoprotein cholesterol, triglycerides, glucose, fasting insulin) were measured with the use of standard clinical methods and analyzed individually and as a clustered cardiometabolic risk score standardized by age and sex ( z score). Exposure and outcome variables were measured at baseline and at follow-up 7 mo later. Results: Sedentary time was not associated with any of the individual cardiometabolic risk factors or clustered cardiometabolic risk in prospective analyses. Moderate physical activity at baseline predicted lower concentrations of triglycerides ( P = 0.021) and homeostatic model assessment for insulin resistance ( P = 0.027) at follow-up independent of sex, socioeconomic status, Tanner stage, monitor wear time, or WC. Moderate-to-vigorous physical activity ( P = 0.043) and vigorous physical activity ( P = 0.028) predicted clustered cardiometabolic risk at follow-up, but these associations were attenuated after adjusting for WC. Conclusions: Physical activity, but not sedentary time, is prospectively associated with cardiometabolic risk in healthy children. Public health strategies aimed at improving children's cardiometabolic profile should strive for increasing physical activity of at least moderate intensity rather than reducing sedentary time. This trial was registered at clinicaltrials.gov as NCT02132494. © 2017 American Society for Nutrition.
NASA Technical Reports Server (NTRS)
Todling, Ricardo; Diniz, F. L. R.; Takacs, L. L.; Suarez, M. J.
2018-01-01
Many hybrid data assimilation systems currently used for NWP employ some form of dual-analysis system approach. Typically a hybrid variational analysis is responsible for creating initial conditions for high-resolution forecasts, and an ensemble analysis system is responsible for creating sample perturbations used to form the flow-dependent part of the background error covariance required in the hybrid analysis component. In many of these, the two analysis components employ different methodologies, e.g., variational and ensemble Kalman filter. In such cases, it is not uncommon to have observations treated rather differently between the two analyses components; recentering of the ensemble analysis around the hybrid analysis is used to compensated for such differences. Furthermore, in many cases, the hybrid variational high-resolution system implements some type of four-dimensional approach, whereas the underlying ensemble system relies on a three-dimensional approach, which again introduces discrepancies in the overall system. Connected to these is the expectation that one can reliably estimate observation impact on forecasts issued from hybrid analyses by using an ensemble approach based on the underlying ensemble strategy of dual-analysis systems. Just the realization that the ensemble analysis makes substantially different use of observations as compared to their hybrid counterpart should serve as enough evidence of the implausibility of such expectation. This presentation assembles numerous anecdotal evidence to illustrate the fact that hybrid dual-analysis systems must, at the very minimum, strive for consistent use of the observations in both analysis sub-components. Simpler than that, this work suggests that hybrid systems can reliably be constructed without the need to employ a dual-analysis approach. In practice, the idea of relying on a single analysis system is appealing from a cost-maintenance perspective. More generally, single-analysis systems avoid contradictions such as having to choose one sub-component to generate performance diagnostics to another, possibly not fully consistent, component.
Localization of Impaired Kinesthetic Processing Post-stroke.
Kenzie, Jeffrey M; Semrau, Jennifer A; Findlater, Sonja E; Yu, Amy Y; Desai, Jamsheed A; Herter, Troy M; Hill, Michael D; Scott, Stephen H; Dukelow, Sean P
2016-01-01
Kinesthesia is our sense of limb motion, and allows us to gauge the speed, direction, and amplitude of our movements. Over half of stroke survivors have significant impairments in kinesthesia, which leads to greatly reduced recovery and function in everyday activities. Despite the high reported incidence of kinesthetic deficits after stroke, very little is known about how damage beyond just primary somatosensory areas affects kinesthesia. Stroke provides an ideal model to examine structure-function relationships specific to kinesthetic processing, by comparing lesion location with behavioral impairment. To examine this relationship, we performed voxel-based lesion-symptom mapping and statistical region of interest analyses on a large sample of sub-acute stroke subjects ( N = 142) and compared kinesthetic performance with stroke lesion location. Subjects with first unilateral, ischemic stroke underwent neuroimaging and a comprehensive robotic kinesthetic assessment (~9 days post-stroke). The robotic exoskeleton measured subjects' ability to perform a kinesthetic mirror-matching task of the upper limbs without vision. The robot moved the stroke-affected arm and subjects' mirror-matched the movement with the unaffected arm. We found that lesions both within and outside primary somatosensory cortex were associated with significant kinesthetic impairments. Further, sub-components of kinesthesia were associated with different lesion locations. Impairments in speed perception were primarily associated with lesions to the right post-central and supramarginal gyri whereas impairments in amplitude of movement perception were primarily associated with lesions in the right pre-central gyrus, anterior insula, and superior temporal gyrus. Impairments in perception of movement direction were associated with lesions to bilateral post-central and supramarginal gyri, right superior temporal gyrus and parietal operculum. All measures of impairment shared a common association with damage to the right supramarginal gyrus. These results suggest that processing of kinesthetic information occurs beyond traditional sensorimotor areas. Additionally, this dissociation between kinesthetic sub-components may indicate specialized processing in these brain areas that form a larger distributed network.
Localization of Impaired Kinesthetic Processing Post-stroke
Kenzie, Jeffrey M.; Semrau, Jennifer A.; Findlater, Sonja E.; Yu, Amy Y.; Desai, Jamsheed A.; Herter, Troy M.; Hill, Michael D.; Scott, Stephen H.; Dukelow, Sean P.
2016-01-01
Kinesthesia is our sense of limb motion, and allows us to gauge the speed, direction, and amplitude of our movements. Over half of stroke survivors have significant impairments in kinesthesia, which leads to greatly reduced recovery and function in everyday activities. Despite the high reported incidence of kinesthetic deficits after stroke, very little is known about how damage beyond just primary somatosensory areas affects kinesthesia. Stroke provides an ideal model to examine structure-function relationships specific to kinesthetic processing, by comparing lesion location with behavioral impairment. To examine this relationship, we performed voxel-based lesion-symptom mapping and statistical region of interest analyses on a large sample of sub-acute stroke subjects (N = 142) and compared kinesthetic performance with stroke lesion location. Subjects with first unilateral, ischemic stroke underwent neuroimaging and a comprehensive robotic kinesthetic assessment (~9 days post-stroke). The robotic exoskeleton measured subjects' ability to perform a kinesthetic mirror-matching task of the upper limbs without vision. The robot moved the stroke-affected arm and subjects' mirror-matched the movement with the unaffected arm. We found that lesions both within and outside primary somatosensory cortex were associated with significant kinesthetic impairments. Further, sub-components of kinesthesia were associated with different lesion locations. Impairments in speed perception were primarily associated with lesions to the right post-central and supramarginal gyri whereas impairments in amplitude of movement perception were primarily associated with lesions in the right pre-central gyrus, anterior insula, and superior temporal gyrus. Impairments in perception of movement direction were associated with lesions to bilateral post-central and supramarginal gyri, right superior temporal gyrus and parietal operculum. All measures of impairment shared a common association with damage to the right supramarginal gyrus. These results suggest that processing of kinesthetic information occurs beyond traditional sensorimotor areas. Additionally, this dissociation between kinesthetic sub-components may indicate specialized processing in these brain areas that form a larger distributed network. PMID:27799902
Hierarchical graphs for rule-based modeling of biochemical systems
2011-01-01
Background In rule-based modeling, graphs are used to represent molecules: a colored vertex represents a component of a molecule, a vertex attribute represents the internal state of a component, and an edge represents a bond between components. Components of a molecule share the same color. Furthermore, graph-rewriting rules are used to represent molecular interactions. A rule that specifies addition (removal) of an edge represents a class of association (dissociation) reactions, and a rule that specifies a change of a vertex attribute represents a class of reactions that affect the internal state of a molecular component. A set of rules comprises an executable model that can be used to determine, through various means, the system-level dynamics of molecular interactions in a biochemical system. Results For purposes of model annotation, we propose the use of hierarchical graphs to represent structural relationships among components and subcomponents of molecules. We illustrate how hierarchical graphs can be used to naturally document the structural organization of the functional components and subcomponents of two proteins: the protein tyrosine kinase Lck and the T cell receptor (TCR) complex. We also show that computational methods developed for regular graphs can be applied to hierarchical graphs. In particular, we describe a generalization of Nauty, a graph isomorphism and canonical labeling algorithm. The generalized version of the Nauty procedure, which we call HNauty, can be used to assign canonical labels to hierarchical graphs or more generally to graphs with multiple edge types. The difference between the Nauty and HNauty procedures is minor, but for completeness, we provide an explanation of the entire HNauty algorithm. Conclusions Hierarchical graphs provide more intuitive formal representations of proteins and other structured molecules with multiple functional components than do the regular graphs of current languages for specifying rule-based models, such as the BioNetGen language (BNGL). Thus, the proposed use of hierarchical graphs should promote clarity and better understanding of rule-based models. PMID:21288338
Anema, Aranka; Fielden, Sarah J.; Shurgold, Susan; Ding, Erin; Messina, Jennifer; Jones, Jennifer E.; Chittock, Brian; Monteith, Ken; Globerman, Jason; Rourke, Sean B.; Hogg, Robert S.
2016-01-01
Objective People living with HIV in high-resource settings suffer severe levels of food insecurity; however, limited evidence exists regarding dietary intake and sub-components that characterize food insecurity (i.e. food quantity, quality, safety or procurement) in this population. We examined the prevalence and characteristics of food insecurity among people living with HIV across British Columbia, Canada. Design This cross-sectional analysis was conducted within a national community-based research initiative. Methods Food security was measured using the Health Canada Household Food Security Scale Module. Logistic regression was used to determine key independent predictors of food insecurity, controlling for potential confounders. Results Of 262 participants, 192 (73%) reported food insecurity. Sub-components associated with food insecurity in bivariate analysis included: < RDI consumption of protein (p = 0.046); being sick from spoiled/unsafe food in the past six months (p = 0.010); and procurement of food using non-traditional methods (p <0.05). In multivariable analyses, factors significantly associated with food insecurity included: procurement of food using non-traditional methods [AOR = 11.11, 95% CI: 4.79–25.68, p = <0.001]; younger age [AOR = 0.92, 95% CI: 0.86–0.96, p = <0.001]; unstable housing [AOR = 4.46, 95% CI: 1.15–17.36, p = 0.031]; household gross annual income [AOR = 4.49, 95% CI: 1.74–11.60, p = 0.002]; and symptoms of depression [AOR = 2.73, 95% CI: 1.25–5.96, p = 0.012]. Conclusions Food insecurity among people living with HIV in British Columbia is characterized by poor dietary quality and food procurement methods. Notably, participants who reported procuring in non-traditional manners were over 10 times more likely to be food insecure. These findings suggest a need for tailored food security and social support interventions in this setting. PMID:27487041
Quarto, Tiziana; Paparella, Isabella; De Tullio, Davide; Viscanti, Giovanna; Fazio, Leonardo; Taurisano, Paolo; Romano, Raffaella; Rampino, Antonio; Masellis, Rita; Popolizio, Teresa; Selvaggi, Pierluigi; Pergola, Giulio; Bertolino, Alessandro; Blasi, Giuseppe
2017-09-16
The brain functional mechanisms translating genetic risk into emotional symptoms in schizophrenia (SCZ) may include abnormal functional integration between areas key for emotion processing, such as the amygdala and the lateral prefrontal cortex (LPFC). Indeed, investigation of these mechanisms is also complicated by emotion processing comprising different subcomponents and by disease-associated state variables. Here, our aim was to investigate the relationship between risk for SCZ and effective connectivity between the amygdala and the LPFC during different subcomponents of emotion processing. Thus, we first characterized with dynamic causal modeling (DCM) physiological patterns of LPFC-amygdala effective connectivity in healthy controls (HC) during implicit and explicit emotion processing. Then, we compared DCM patterns in a subsample of HC, in patients with SCZ and in healthy siblings of patients (SIB), matched for demographics. Finally, we investigated in HC association of LPFC-amygdala effective connectivity with a genome-wide supported variant increasing genetic risk for SCZ and possibly relevant to emotion processing (DRD2 rs2514218). In HC, we found that a "bottom-up" amygdala-to-LPFC pattern during implicit processing and a "top-down" LPFC-to-amygdala pattern during explicit processing were the most likely directional models of effective connectivity. Differently, implicit emotion processing in SIB, SCZ, and HC homozygous for the SCZ risk rs2514218 C allele was associated with decreased probability for the "bottom-up" as well as with increased probability for the "top-down" model. These findings suggest that task-specific anomaly in the directional flow of information or disconnection between the amygdala and the LPFC is a good candidate endophenotype of SCZ. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.
Trost, Sarah; Gruber, Oliver
2012-01-01
Recent functional neuroimaging studies have provided evidence that human verbal working memory is represented by two complementary neural systems, a left lateralized premotor-parietal network implementing articulatory rehearsal and a presumably phylogenetically older bilateral anterior-prefrontal/inferior-parietal network subserving non-articulatory maintenance of phonological information. In order to corroborate these findings from functional neuroimaging, we performed a targeted behavioural study in patients with very selective and circumscribed brain lesions to key regions suggested to support these different subcomponents of human verbal working memory. Within a sample of over 500 neurological patients assessed with high-resolution structural magnetic resonance imaging, we identified 2 patients with corresponding brain lesions, one with an isolated lesion to Broca's area and the other with a selective lesion bilaterally to the anterior middle frontal gyrus. These 2 patients as well as groups of age-matched healthy controls performed two circuit-specific verbal working memory tasks. In this way, we systematically assessed the hypothesized selective behavioural effects of these brain lesions on the different subcomponents of verbal working memory in terms of a double dissociation. Confirming prior findings, the lesion to Broca's area led to reduced performance under articulatory rehearsal, whereas the non-articulatory maintenance of phonological information was unimpaired. Conversely, the bifrontopolar brain lesion was associated with impaired non-articulatory phonological working memory, whereas performance under articulatory rehearsal was unaffected. The present experimental neuropsychological study in patients with specific and circumscribed brain lesions confirms the hypothesized double dissociation of two complementary brain systems underlying verbal working memory in humans. In particular, the results demonstrate the functional relevance of the anterior prefrontal cortex for non-articulatory maintenance of phonological information and, in this way, provide further support for the evolutionary-based functional-neuroanatomical model of human working memory. Copyright © 2012 S. Karger AG, Basel.
2013-01-01
Assessing the detrimental health effects of chemicals requires the extrapolation of experimental data in animals to human populations. This is achieved by applying a default uncertainty factor of 100 to doses not found to be associated with observable effects in laboratory animals. It is commonly assumed that the toxicokinetic and toxicodynamic sub-components of this default uncertainty factor represent worst-case scenarios and that the multiplication of those components yields conservative estimates of safe levels for humans. It is sometimes claimed that this conservatism also offers adequate protection from mixture effects. By analysing the evolution of uncertainty factors from a historical perspective, we expose that the default factor and its sub-components are intended to represent adequate rather than worst-case scenarios. The intention of using assessment factors for mixture effects was abandoned thirty years ago. It is also often ignored that the conservatism (or otherwise) of uncertainty factors can only be considered in relation to a defined level of protection. A protection equivalent to an effect magnitude of 0.001-0.0001% over background incidence is generally considered acceptable. However, it is impossible to say whether this level of protection is in fact realised with the tolerable doses that are derived by employing uncertainty factors. Accordingly, it is difficult to assess whether uncertainty factors overestimate or underestimate the sensitivity differences in human populations. It is also often not appreciated that the outcome of probabilistic approaches to the multiplication of sub-factors is dependent on the choice of probability distributions. Therefore, the idea that default uncertainty factors are overly conservative worst-case scenarios which can account both for the lack of statistical power in animal experiments and protect against potential mixture effects is ill-founded. We contend that precautionary regulation should provide an incentive to generate better data and recommend adopting a pragmatic, but scientifically better founded approach to mixture risk assessment. PMID:23816180
Martin, Olwenn V; Martin, Scholze; Kortenkamp, Andreas
2013-07-01
Assessing the detrimental health effects of chemicals requires the extrapolation of experimental data in animals to human populations. This is achieved by applying a default uncertainty factor of 100 to doses not found to be associated with observable effects in laboratory animals. It is commonly assumed that the toxicokinetic and toxicodynamic sub-components of this default uncertainty factor represent worst-case scenarios and that the multiplication of those components yields conservative estimates of safe levels for humans. It is sometimes claimed that this conservatism also offers adequate protection from mixture effects. By analysing the evolution of uncertainty factors from a historical perspective, we expose that the default factor and its sub-components are intended to represent adequate rather than worst-case scenarios. The intention of using assessment factors for mixture effects was abandoned thirty years ago. It is also often ignored that the conservatism (or otherwise) of uncertainty factors can only be considered in relation to a defined level of protection. A protection equivalent to an effect magnitude of 0.001-0.0001% over background incidence is generally considered acceptable. However, it is impossible to say whether this level of protection is in fact realised with the tolerable doses that are derived by employing uncertainty factors. Accordingly, it is difficult to assess whether uncertainty factors overestimate or underestimate the sensitivity differences in human populations. It is also often not appreciated that the outcome of probabilistic approaches to the multiplication of sub-factors is dependent on the choice of probability distributions. Therefore, the idea that default uncertainty factors are overly conservative worst-case scenarios which can account both for the lack of statistical power in animal experiments and protect against potential mixture effects is ill-founded. We contend that precautionary regulation should provide an incentive to generate better data and recommend adopting a pragmatic, but scientifically better founded approach to mixture risk assessment.
Chase, H W; Fournier, J C; Bertocci, M A; Greenberg, T; Aslam, H; Stiffler, R; Lockovich, J; Graur, S; Bebko, G; Forbes, E E; Phillips, M L
2017-01-01
High trait impulsive sensation seeking (ISS) is common in 18–25-year olds, and is associated with risky decision-making and deleterious outcomes. We examined relationships among: activity in reward regions previously associated with ISS during an ISS-relevant context, uncertain reward expectancy (RE), using fMRI; ISS impulsivity and sensation-seeking subcomponents; and risky decision-making in 100, transdiagnostically recruited 18–25-year olds. ISS, anhedonia, anxiety, depression and mania were measured using self-report scales; clinician-administered scales also assessed the latter four. A post-scan risky decision-making task measured ‘risky' (possible win/loss/mixed/neutral) fMRI-task versus ‘sure thing' stimuli. ‘Bias' reflected risky over safe choices. Uncertain RE-related activity in left ventrolateral prefrontal cortex and bilateral ventral striatum was positively associated with an ISS composite score, comprising impulsivity and sensation-seeking–fun-seeking subcomponents (ISSc; P⩽0.001). Bias positively associated with sensation seeking–experience seeking (ES; P=0.003). This relationship was moderated by ISSc (P=0.009): it was evident only in high ISSc individuals. Whole-brain analyses showed a positive relationship between: uncertain RE-related left ventrolateral prefrontal cortical activity and ISSc; uncertain RE-related visual attention and motor preparation neural network activity and ES; and uncertain RE-related dorsal anterior cingulate cortical activity and bias, specifically in high ISSc participants (all ps<0.05, peak-level, family-wise error corrected). We identify an indirect pathway linking greater levels of uncertain RE-related activity in reward, visual attention and motor networks with greater risky decision-making, via positive relationships with impulsivity, fun seeking and ES. These objective neural markers of high ISS can guide new treatment developments for young adults with high levels of this debilitating personality trait. PMID:28418404
Schmidt, Burkhard; Bosch, Jos A; Jarczok, Marc N; Herr, Raphael M; Loerbroks, Adrian; van Vianen, Annelies E M; Fischer, Joachim E
2015-01-15
Job stress is a predictor of cardiovascular disease incidence and mortality and the metabolic syndrome (MetS) represents one of the key pathways potentially underlying those associations. Effort-reward imbalance (ERI) represents one of the most influential theoretical work stress models, but evidence on its relationship with MetS remains sparse and with only limited generalizability. We therefore aimed to determine this association in a large occupational sample with different occupational groups. The present study used cross-sectional data from an industrial sample in Germany (n=4141). ERI was assessed by a validated 10-item questionnaire. MetS was defined according to a joined interim statement of six expert associations involved with MetS, stating that three out of five risk factors (raised blood pressure, elevated triglycerides, low high density lipoprotein, raised fasting glucose and central obesity) qualify a patient for MetS. Multivariable associations of ERI, and its subcomponents "effort" and "reward", with MetS were estimated by logistic regression-based multivariate odds ratios (ORs) with 95% confidence intervals (CIs). ERI (continuous z-score) was positively associated with MetS (zERI: OR=1.14, 95% CI=1.03-1.26). The association was more prominent in males (zERI: OR 1.20, 95% CI=1.07-1.33) and in younger employees (age 18-49 zERI: OR=1.24, 95% CI=1.09-1.40). Analysis of the ERI subcomponents yielded weak associations of both effort (zEffort: OR=1.12, 95% CI=1.00-1.25) and reward (zReward: OR=0.92, 95% CI=0.84-1.00) with MetS. ERI is associated with increased occurrence of MetS, in particular among younger men. Further longitudinal studies are needed to determine the temporal relation of these associations. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
Akylbekova, Ermeg L; Payne, John P; Newton-Cheh, Christopher; May, Warren L; Fox, Ervin R; Wilson, James G; Sarpong, Daniel F; Taylor, Herman A; Maher, Joseph F
2014-01-01
African-American ancestry, hypokalemia, and QT interval prolongation on the electrocardiogram are all risk factors for sudden cardiac death (SCD), but their interactions remain to be characterized. SCN5A-1103Y is a common missense variant, of African ancestry, of the cardiac sodium channel gene. SCN5A-1103Y is known to interact with QT-prolonging factors to promote ventricular arrhythmias in persons at high risk for SCD, but its clinical impact in the general African-American population has not been established. We genotyped SCN5A-S1103Y in 4,476 participants of the Jackson Heart Study, a population-based cohort of African Americans. We investigated the effect of SCN5A-1103Y, including interaction with hypokalemia, on QT interval prolongation, a widely-used indicator of prolonged myocardial repolarization and predisposition to SCD. We then evaluated the two sub-components of the QT interval: QRS duration and JT interval. The carrier frequency for SCN5A-1103Y was 15.4%. SCN5A-1103Y was associated with QT interval prolongation (2.7 milliseconds; P < .001) and potentiated the effect of hypokalemia on QT interval prolongation (14.6 milliseconds; P = .02). SCN5A-1103Y had opposing effects on the two sub-components of the QT interval, with shortening of QRS duration (-1.5 milliseconds; P = .001) and prolongation of the JT interval (3.4 milliseconds; P < .001). Hypokalemia was associated with diuretic use (78%; P < .001). SCN5A-1103Y potentiates the effect of hypokalemia on prolonging myocardial repolarization in the general African-American population. These findings have clinical implications for modification of QT prolonging factors, such as hypokalemia, in the 15% of African Americans who are carriers of SCN5A-1103Y. © 2014.
2012-01-01
Background No validated model exists to explain the learning effects of assessment, a problem when designing and researching assessment for learning. We recently developed a model explaining the pre-assessment learning effects of summative assessment in a theory teaching context. The challenge now is to validate this model. The purpose of this study was to explore whether the model was operational in a clinical context as a first step in this process. Methods Given the complexity of the model, we adopted a qualitative approach. Data from in-depth interviews with eighteen medical students were subject to content analysis. We utilised a code book developed previously using grounded theory. During analysis, we remained alert to data that might not conform to the coding framework and open to the possibility of deploying inductive coding. Ethical clearance and informed consent were obtained. Results The three components of the model i.e., assessment factors, mechanism factors and learning effects were all evident in the clinical context. Associations between these components could all be explained by the model. Interaction with preceptors was identified as a new subcomponent of assessment factors. The model could explain the interrelationships of the three facets of this subcomponent i.e., regular accountability, personal consequences and emotional valence of the learning environment, with previously described components of the model. Conclusions The model could be utilized to analyse and explain observations in an assessment context different to that from which it was derived. In the clinical setting, the (negative) influence of preceptors on student learning was particularly prominent. In this setting, learning effects resulted not only from the high-stakes nature of summative assessment but also from personal stakes, e.g. for esteem and agency. The results suggest that to influence student learning, consequences should accrue from assessment that are immediate, concrete and substantial. The model could have utility as a planning or diagnostic tool in practice and research settings. PMID:22420839
The Double Galaxy Cluster A2465. III. X-Ray and Weak-lensing Observations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wegner, Gary A.; Umetsu, Keiichi; Molnar, Sandor M.
We report Chandra X-ray observations and optical weak-lensing measurements from Subaru/Suprime-Cam images of the double galaxy cluster A2465 ( z = 0.245). The X-ray brightness data are fit to a β model to obtain the radial gas density profiles of the northeast (NE) and southwest (SW) subcomponents, which are seen to differ in structure. We determine core radii, central temperatures, the gas masses within r {sub 500c}, and the total masses for the broader NE and sharper SW components assuming hydrostatic equilibrium. There is no large X-ray excess between the two components. The central entropy of the NE subcluster ismore » about two times higher than the SW. Along with its structural properties and an apparent radio halo that is a sign of a merger, this suggests that the NE component has undergone merging on its own. The weak-lensing analysis gives virial masses for each substructure, which compare well with earlier dynamical results. The derived outer mass contours of the SW sub-component from weak lensing are more irregular and extended than those of the NE. Although there is a weak enhancement and small offsets between X-ray gas and mass centers from weak lensing, the lack of large amounts of gas between the two subclusters indicates that A2465 is in a pre-merger state. We discuss star formation enhancement in this system resulting from its dynamics and shock-induced star formation scenarios. A dynamical model that is consistent with the observed cluster data, based on the FLASH program and the radial infall model, is constructed, where the subclusters currently separated by ∼1.2 Mpc are approaching each other at ∼2000 km s{sup −1} and will meet in ∼0.4 Gyr.« less
Reconciling large- and small-scale structure in Twin Higgs models
NASA Astrophysics Data System (ADS)
Prilepina, Valentina; Tsai, Yuhsin
2017-09-01
We study possible extensions of the Twin Higgs model that solve the Hierarchy problem and simultaneously address problems of the large- and small-scale structures of the Universe. Besides naturally providing dark matter (DM) candidates as the lightest charged twin fermions, the twin sector contains a light photon and neutrinos, which can modify structure formation relative to the prediction from the ΛCDM paradigm. We focus on two viable scenarios. First, we study a Fraternal Twin Higgs model in which the spin-3/2 baryon \\widehat{Ω}˜ (\\widehat{b}\\widehat{b}\\widehat{b}) and the lepton twin tau \\widehat{τ} contribute to the dominant and subcomponent dark matter densities. A non-decoupled scattering between the twin tau and twin neutrino arising from a gauged twin lepton number symmetry provides a drag force that damps the density inhomogeneity of a dark matter subcomponent. Next, we consider the possibility of introducing a twin hydrogen atom Ĥ as the dominant DM component. After recombination, a small fraction of the twin protons and leptons remains ionized during structure formation, and their scattering to twin neutrinos through a gauged U(1) B-L force provides the mechanism that damps the density inhomogeneity. Both scenarios realize the Partially Acoustic dark matter (PAcDM) scenario and explain the σ 8 discrepancy between the CMB and weak lensing results. Moreover, the self-scattering neutrino behaves as a dark fluid that enhances the size of the Hubble rate H 0 to accommodate the local measurement result while satisfying the CMB constraint. For the small-scale structure, the scattering of \\widehat{Ω} 's and Ĥ's through the twin photon exchange generates a self-interacting dark matter (SIDM) model that solves the mass deficit problem from dwarf galaxy to galaxy cluster scales. Furthermore, when varying general choices of the twin photon coupling, bounds from the dwarf galaxy and the cluster merger observations can set an upper limit on the twin electric coupling.
On-line dimensional measurement of small components on the eyeglasses assembly line
NASA Astrophysics Data System (ADS)
Rosati, G.; Boschetti, G.; Biondi, A.; Rossi, A.
2009-03-01
Dimensional measurement of the subassemblies at the beginning of the assembly line is a very crucial process for the eyeglasses industry, since even small manufacturing errors of the components can lead to very visible defects on the final product. For this reason, all subcomponents of the eyeglass are verified before beginning the assembly process either with a 100% inspection or on a statistical basis. Inspection is usually performed by human operators, with high costs and a degree of repeatability which is not always satisfactory. This paper presents a novel on-line measuring system for dimensional verification of small metallic subassemblies for the eyeglasses industry. The machine vision system proposed, which was designed to be used at the beginning of the assembly line, could also be employed in the Statistical Process Control (SPC) by the manufacturer of the subassemblies. The automated system proposed is based on artificial vision, and exploits two CCD cameras and an anthropomorphic robot to inspect and manipulate the subcomponents of the eyeglass. Each component is recognized by the first camera in a quite large workspace, picked up by the robot and placed in the small vision field of the second camera which performs the measurement process. Finally, the part is palletized by the robot. The system can be easily taught by the operator by simply placing the template object in the vision field of the measurement camera (for dimensional data acquisition) and hence by instructing the robot via the Teaching Control Pendant within the vision field of the first camera (for pick-up transformation acquisition). The major problem we dealt with is that the shape and dimensions of the subassemblies can vary in a quite wide range, but different positioning of the same component can look very similar one to another. For this reason, a specific shape recognition procedure was developed. In the paper, the whole system is presented together with first experimental lab results.
Application of the Hydroecological Integrity Assessment Process for Missouri Streams
Kennen, Jonathan G.; Henriksen, James A.; Heasley, John; Cade, Brian S.; Terrell, James W.
2009-01-01
Natural flow regime concepts and theories have established the justification for maintaining or restoring the range of natural hydrologic variability so that physiochemical processes, native biodiversity, and the evolutionary potential of aquatic and riparian assemblages can be sustained. A synthesis of recent research advances in hydroecology, coupled with stream classification using hydroecologically relevant indices, has produced the Hydroecological Integrity Assessment Process (HIP). HIP consists of (1) a regional classification of streams into hydrologic stream types based on flow data from long-term gaging-station records for relatively unmodified streams, (2) an identification of stream-type specific indices that address 11 subcomponents of the flow regime, (3) an ability to establish environmental flow standards, (4) an evaluation of hydrologic alteration, and (5) a capacity to conduct alternative analyses. The process starts with the identification of a hydrologic baseline (reference condition) for selected locations, uses flow data from a stream-gage network, and proceeds to classify streams into hydrologic stream types. Concurrently, the analysis identifies a set of non-redundant and ecologically relevant hydrologic indices for 11 subcomponents of flow for each stream type. Furthermore, regional hydrologic models for synthesizing flow conditions across a region and the development of flow-ecology response relations for each stream type can be added to further enhance the process. The application of HIP to Missouri streams identified five stream types ((1) intermittent, (2) perennial runoff-flashy, (3) perennial runoff-moderate baseflow, (4) perennial groundwater-stable, and (5) perennial groundwater-super stable). Two Missouri-specific computer software programs were developed: (1) a Missouri Hydrologic Assessment Tool (MOHAT) which is used to establish a hydrologic baseline, provide options for setting environmental flow standards, and compare past and proposed hydrologic alterations; and (2) a Missouri Stream Classification Tool (MOSCT) designed for placing previously unclassified streams into one of the five pre-defined stream types.
The Double Galaxy Cluster A2465. III. X-Ray and Weak-lensing Observations
NASA Astrophysics Data System (ADS)
Wegner, Gary A.; Umetsu, Keiichi; Molnar, Sandor M.; Nonino, Mario; Medezinski, Elinor; Andrade-Santos, Felipe; Bogdan, Akos; Lovisari, Lorenzo; Forman, William R.; Jones, Christine
2017-07-01
We report Chandra X-ray observations and optical weak-lensing measurements from Subaru/Suprime-Cam images of the double galaxy cluster A2465 (z = 0.245). The X-ray brightness data are fit to a β model to obtain the radial gas density profiles of the northeast (NE) and southwest (SW) subcomponents, which are seen to differ in structure. We determine core radii, central temperatures, the gas masses within r 500c, and the total masses for the broader NE and sharper SW components assuming hydrostatic equilibrium. There is no large X-ray excess between the two components. The central entropy of the NE subcluster is about two times higher than the SW. Along with its structural properties and an apparent radio halo that is a sign of a merger, this suggests that the NE component has undergone merging on its own. The weak-lensing analysis gives virial masses for each substructure, which compare well with earlier dynamical results. The derived outer mass contours of the SW sub-component from weak lensing are more irregular and extended than those of the NE. Although there is a weak enhancement and small offsets between X-ray gas and mass centers from weak lensing, the lack of large amounts of gas between the two subclusters indicates that A2465 is in a pre-merger state. We discuss star formation enhancement in this system resulting from its dynamics and shock-induced star formation scenarios. A dynamical model that is consistent with the observed cluster data, based on the FLASH program and the radial infall model, is constructed, where the subclusters currently separated by ˜1.2 Mpc are approaching each other at ˜2000 km s-1 and will meet in ˜0.4 Gyr. Based in part on data collected at the Subaru Telescope, which is operated by the National Astronomical Society of Japan.
Narrow band quantitative and multivariate electroencephalogram analysis of peri-adolescent period
2012-01-01
Background The peri-adolescent period is a crucial developmental moment of transition from childhood to emergent adulthood. The present report analyses the differences in Power Spectrum (PS) of the Electroencephalogram (EEG) between late childhood (24 children between 8 and 13 years old) and young adulthood (24 young adults between 18 and 23 years old). Results The narrow band analysis of the Electroencephalogram was computed in the frequency range of 0–20 Hz. The analysis of mean and variance suggested that six frequency ranges presented a different rate of maturation at these ages, namely: low delta, delta-theta, low alpha, high alpha, low beta and high beta. For most of these bands the maturation seems to occur later in anterior sites than posterior sites. Correlational analysis showed a lower pattern of correlation between different frequencies in children than in young adults, suggesting a certain asynchrony in the maturation of different rhythms. The topographical analysis revealed similar topographies of the different rhythms in children and young adults. Principal Component Analysis (PCA) demonstrated the same internal structure for the Electroencephalogram of both age groups. Principal Component Analysis allowed to separate four subcomponents in the alpha range. All these subcomponents peaked at a lower frequency in children than in young adults. Conclusions The present approaches complement and solve some of the incertitudes when the classical brain broad rhythm analysis is applied. Children have a higher absolute power than young adults for frequency ranges between 0-20 Hz, the correlation of Power Spectrum (PS) with age and the variance age comparison showed that there are six ranges of frequencies that can distinguish the level of EEG maturation in children and adults. The establishment of maturational order of different frequencies and its possible maturational interdependence would require a complete series including all the different ages. PMID:22920159
España-Romero, Vanesa; Golubic, Rajna; Martin, Kathryn R; Hardy, Rebecca; Ekelund, Ulf; Kuh, Diana; Wareham, Nicholas J; Cooper, Rachel; Brage, Soren
2014-01-01
To compare physical activity (PA) subcomponents from EPIC Physical Activity Questionnaire (EPAQ2) and combined heart rate and movement sensing in older adults. Participants aged 60-64y from the MRC National Survey of Health and Development in Great Britain completed EPAQ2, which assesses self-report PA in 4 domains (leisure time, occupation, transportation and domestic life) during the past year and wore a combined sensor for 5 consecutive days. Estimates of PA energy expenditure (PAEE), sedentary behaviour, light (LPA) and moderate-to-vigorous PA (MVPA) were obtained from EPAQ2 and combined sensing and compared. Complete data were available in 1689 participants (52% women). EPAQ2 estimates of PAEE and MVPA were higher than objective estimates and sedentary time and LPA estimates were lower [bias (95% limits of agreement) in men and women were 32.3 (-61.5 to 122.6) and 29.0 (-39.2 to 94.6) kJ/kg/day for PAEE; -4.6 (-10.6 to 1.3) and -6.0 (-10.9 to -1.0) h/day for sedentary time; -171.8 (-454.5 to 110.8) and -60.4 (-367.5 to 246.6) min/day for LPA; 91.1 (-159.5 to 341.8) and 55.4 (-117.2 to 228.0) min/day for MVPA]. There were significant positive correlations between all self-reported and objectively assessed PA subcomponents (rho= 0.12 to 0.36); the strongest were observed for MVPA (rho = 0.30 men; rho = 0.36 women) and PAEE (rho = 0.26 men; rho = 0.25 women). EPAQ2 produces higher estimates of PAEE and MVPA and lower estimates of sedentary and LPA than objective assessment. However, both methodologies rank individuals similarly, suggesting that EPAQ2 may be used in etiological studies in this population.
Physician burnout, work engagement and the quality of patient care.
Loerbroks, A; Glaser, J; Vu-Eickmann, P; Angerer, P
2017-07-01
Research suggests that burnout in physicians is associated with poorer patient care, but evidence is inconclusive. More recently, the concept of work engagement has emerged (i.e. the beneficial counterpart of burnout) and has been associated with better care. Evidence remains markedly sparse however. To examine the associations of burnout and work engagement with physicians' self-perceived quality of care. We drew on cross-sectional data from physicians in Germany. We used a six-item version of the Maslach Burnout Inventory measuring exhaustion and depersonalization. We employed the nine-item Utrecht Work Engagement Scale to assess work engagement and its subcomponents: vigour, dedication and absorption. We measured physicians' own perceptions of their quality of care by a six-item instrument covering practices and attitudes. We used continuous and categorized dependent and independent variables in linear and logistic regression analyses. There were 416 participants. In multivariable linear regression analyses, increasing burnout total scores were associated with poorer perceived quality of care [unstandardized regression coefficient (b) = 0.45, 95% confidence interval (CI) 0.37, 0.54]. This association was stronger for depersonalization (b = 0.37, 95% CI 0.29, 0.44) than for exhaustion (b = 0.26, 95% CI 0.18, 0.33). Increasing work engagement was associated with higher perceived quality care (b for the total score = -0.20, 95% CI -0.28, -0.11). This was confirmed for each subcomponent with stronger associations for vigour (b = -0.21, 95% CI -0.29, -0.13) and dedication (b = -0.16, 95% CI -0.24, -0.09) than for absorption (b = -0.12, 95% CI -0.20, -0.04). Logistic regression analyses yielded comparable results. Physician burnout was associated with self-perceived poorer patient care, while work engagement related to self-reported better care. Studies are needed to corroborate these findings, particularly for work engagement. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com
DOE Office of Scientific and Technical Information (OSTI.GOV)
Qin, Sheng-Li; Schilke, Peter; Sánchez-Monge, Álvaro
2015-04-10
We report on the Submillimeter Array (SMA) observations of molecular lines at 270 GHz toward the W3(OH) and W3(H{sub 2}O) complex. Although previous observations already resolved the W3(H{sub 2}O) into two or three sub-components, the physical and chemical properties of the two sources are not well constrained. Our SMA observations clearly resolved the W3(OH) and W3(H{sub 2}O) continuum cores. Taking advantage of the line fitting tool XCLASS, we identified and modeled a rich molecular spectrum in this complex, including multiple CH{sub 3}CN and CH{sub 3}OH transitions in both cores. HDO, C{sub 2}H{sub 5}CN, O{sup 13}CS, and vibrationally excited lines ofmore » HCN, CH{sub 3}CN, and CH{sub 3}OCHO were only detected in W3(H{sub 2}O). We calculate gas temperatures and column densities for both cores. The results show that W3(H{sub 2}O) has higher gas temperatures and larger column densities than W3(OH) as previously observed, suggesting physical and chemical differences between the two cores. We compare the molecular abundances in W3(H{sub 2}O) to those in the Sgr B2(N) hot core, the Orion KL hot core, and the Orion Compact Ridge, and discuss the chemical origin of specific species. An east–west velocity gradient is seen in W3(H{sub 2}O), and the extension is consistent with the bipolar outflow orientation traced by water masers and radio jets. A north–south velocity gradient across W3(OH) is also observed. However, with current observations we cannot be assured whether the velocity gradients are caused by rotation, outflow, or radial velocity differences of the sub-components of W3(OH)« less
Putnik, Katarina; Houkes, Inge
2011-09-23
Little information exists on work and stress related health of medical doctors in non-EU countries. Filling this knowledge gap is needed to uncover the needs of this target population and to provide information on comparability of health related phenomena such as burnout across countries. This study examined work related characteristics, work-home and home-work interference and burnout among Serbian primary healthcare physicians (PHPs) and compared burnout levels with other medical doctors in EU countries. Data were collected via surveys which contained Maslach Burnout Inventory and other validated instruments measuring work and home related characteristics. The sample consisted of 373 PHPs working in 12 primary healthcare centres. Data were analysed using t-tests and Chi square tests. No gender differences were detected on mean scores of variables among Serbian physicians, who experience high levels of personal accomplishment, workload, job control and social support, medium to high levels of emotional exhaustion, medium levels of depersonalisation and work-home interference, and low levels of home-work interference. There were more women than men who experienced low job control and high depersonalisation. Serbian physicians experienced significantly higher emotional exhaustion and lower depersonalisation than physicians in some other European countries. To diminish excessive workload, the number of physicians working in primary healthcare centres in Serbia should be increased. Considering that differences between countries were detected on all burnout subcomponents, work-related interventions for employees should be country specific. The role of gender needs to be closely examined in future studies as well.
Barajas, Ana; Usall, Judith; Baños, Iris; Dolz, Montserrat; Villalta-Gil, Victoria; Vilaplana, Miriam; Autonell, Jaume; Sánchez, Bernardo; Cervilla, Jorge A; Foix, Alexandrina; Obiols, Jordi E; Haro, Josep Maria; Ochoa, Susana
2013-12-01
The dimensionality of premorbid adjustment (PA) has been a debated issue, with attempts to determine whether PA is a unitary construct or composed of several independent domains characterized by a differential deterioration pattern and specific outcome correlates. This study examines the factorial structure of PA, as well as, the course and correlates of its domains. Retrospective study of 84 adult patients experiencing first-episode psychosis (FEP) (n=33) and individuals with schizophrenia (SCH) (n=51). All patients were evaluated with a comprehensive battery of instruments including clinical, functioning and neuropsychological variables. A principal component analysis accompanied by a varimax rotation method was used to examine the factor structure of the PAS-S scale. Paired t tests and Wilcoxon rank tests were used to assess the changes in PAS domains over time. Bivariate correlation analyses were performed to analyse the relationship between PAS factors and clinical, social and cognitive variables. PA was better explained by three factors (71.65% of the variance): Academic PA, Social PA and Socio-sexual PA. The academic domain showed higher scores of PA from childhood. Social and clinical variables were more strongly related to Social PA and Socio-sexual PA domains, and the Academic PA domain was exclusively associated with cognitive variables. This study supports previous evidence, emphasizing the validity of dividing PA into its sub-components. A differential deterioration pattern and specific correlates were observed in each PA domains, suggesting that impairments in each PA domain might predispose individuals to develop different expressions of psychotic dimensions. © 2013.
NASA Astrophysics Data System (ADS)
Zuraski, Steven M.; Fiorino, Steven T.; Beecher, Elizabeth A.; Figlewski, Nathan M.; Schmidt, Jason D.; McCrae, Jack E.
2016-10-01
The Photometry Analysis and Optical Tracking and Evaluation System (PANOPTES) Quad Axis Telescope is a unique four axis mount Ritchey-Chretien 24 inch telescope capable of tracking objects through the zenith without axes rotation delay (no Dead Zone). This paper describes enhancement components added to the quad axis mount telescope that will enable measurements supporting novel research and field testing focused on `three-dimensional' characterization of turbulent atmospheres, mitigation techniques, and new sensing modalities. These all support research and operational techniques relating to astronomical imaging and electro-optical propagation though the atmosphere, relative to sub-meter class telescopes in humid, continental environments. This effort will use custom designed and commercial off the shelf hardware; sub-system components discussed will include a wavefront sensor system, a co-aligned beam launch system, and a fiber coupled research laser. The wavefront sensing system has the ability to take measurements from a dynamic altitude adjustable laser beacon scattering spot, a key concept that enables rapid turbulence structure parameter measurements over an altitude varied integrated atmospheric volume. The sub-components are integrated with the overall goal of measuring a height-resolved volumetric profile for the atmospheric turbulence structure parameter at the site, and developing mobile techniques for such measurements. The design concept, part selection optimization, baseline component lab testing, and initial field measurements, will be discussed in the main sections of this paper. This project is a collaborative effort between the Air Force Research Labs Sensors Directorate and the Air Force Institute of Technology Center for Directed Energy.
NASA Technical Reports Server (NTRS)
Verrilli, Michael J.; Lee, Kuan
2008-01-01
The acoustic liner system designed for use in the High Speed Civil Transport (HSCT) was tested in a thermal-acoustic environment. Five ceramic matrix composite (CMC) acoustic tile configurations, five bulk acoustic absorbers, and one thermal protection system design were tested. The CMC acoustic tiles were subjected to two 2 3/4 hr ambient temperature acoustic exposures to measure their dynamic response. One exposure was conducted on the tiles alone and the second exposure included the tiles and the T-foam bulk absorber. The measured tile RMS strains were small. With or without the T-foam absorber, the dynamic strains were below strain levels that would cause damage during fatigue loading. After the ambient exposure, a 75-hr durability test of the entire acoustic liner system was conducted using a thermal-acoustic cycle that approximated the anticipated service cycle. Acoustic loads up to 139 dB/Hz and temperatures up to 1670 F (910 C) were employed during this 60 cycle test. During the durability test, the CMC tiles were exposed to temperatures up to 1780 F and a transient through thickness gradient up to 490 F. The TPS peak temperatures on the hot side of the panels ranged from 750 to 1000 F during the 60 cycles. The through thickness delta T ranged from 450 to 650 F, varying with TPS location and cycle number. No damage, such as cracks or chipping, was observed in the CMC tiles after completion of the testing. However, on tile warped during the durability test and was replaced after 43 or 60 cycles. No externally observed damage was found in this tile. No failure of the CMC fasteners occurred, but damage was observed. Cracks and missing material occurred, only in the fastener head region. No indication of damage was observed in the T-foam acoustic absorbers. The SiC foam acoustic absorber experienced damage after about 43 cycles. Cracking in the TPS occurred around the attachment holes and under a vent. In spite of the development of damage, the TPS maintained its insulative capability throughout the durability test. The durability test results demonstrate damage-tolerant CMC tile, CMC fastener, TPS, and T-foam absorber designs for the combined thermal and acoustic engine nozzle environment.
Niobium thin film coating on a 500-MHz copper cavity by plasma deposition
DOE Office of Scientific and Technical Information (OSTI.GOV)
Haipeng Wang; Genfa Wu; H. Phillips
2005-05-16
A system using an Electron Cyclotron Resonance (ECR) plasma source for the deposition of a thin niobium film inside a copper cavity for superconducting accelerator applications has been designed and is being constructed. The system uses a 500-MHz copper cavity as both substrate and vacuum chamber. The ECR plasma will be created to produce direct niobium ion deposition. The central cylindrical grid is DC biased to control the deposition energy. This paper describes the design of several subcomponents including the vacuum chamber, RF supply, biasing grid and magnet coils. Operational parameters are compared between an operating sample deposition system andmore » this system. Engineering work progress toward the first plasma creation will be reported here.« less
Building the Pipeline for Hubble Legacy Archive Grism data
NASA Astrophysics Data System (ADS)
Kümmel, M.; Albrecht, R.; Fosbury, R.; Freudling, W.; Haase, J.; Hook, R. N.; Kuntschner, H.; Lombardi, M.; Micol, A.; Rosa, M.; Stoehr, F.; Walsh, J. R.
2008-10-01
The Pipeline for Hubble Legacy Archive Grism data (PHLAG) is currently being developed as an end-to-end pipeline for the Hubble Legacy Archive (HLA). The inputs to PHLAG are slitless spectroscopic HST data with only the basic calibrations from standard HST pipelines applied; the outputs are fully calibrated, Virtuall Observatory-compatible spectra, which will be made available through a static HLA-archive. We give an overview of the various aspects of PHLAG. The pipeline consists of several subcomponents -- data preparation, data retrieval, image combination, object detection, spectral extraction using the aXe software, quality control -- which is discussed in detail. As a pilot project, PHLAG is currently being applied to NICMOS G141 grism data. Examples of G141 spectra reduced with PHLAG are shown.
Stewart, J B; Hardin, S B; Weinrich, S; McGeorge, S; Lopez, J; Pesut, D
1992-01-01
Literature reports that cognitive understanding and social support can mitigate stress in both adults and adolescents. As a subcomponent of the Carolina Adolescent Health Project (CAHP), this research evaluated the efficacy of a Cognitive Social Support (CSS) group protocol designed to mitigate the disaster stress of adolescents who had been exposed seriously to Hurricane Hugo. A purposive sample of 259 students participated in and evaluated the CSS. This article reports the specific structure, content, process, rationale, and cost of the CSS. Evaluations indicated that 82% of the students evaluated the small-group component of the CSS as "very good" or "excellent," while 70% rated the large-group component as "very good" or "excellent."
Systems Maintenance Automated Repair Tasks (SMART)
NASA Technical Reports Server (NTRS)
2008-01-01
SMART is an interactive decision analysis and refinement software system that uses evaluation criteria for discrepant conditions to automatically provide and populate a document/procedure with predefined steps necessary to repair a discrepancy safely, effectively, and efficiently. SMART can store the tacit (corporate) knowledge merging the hardware specification requirements with the actual "how to" repair methods, sequences, and required equipment, all within a user-friendly interface. Besides helping organizations retain repair knowledge in streamlined procedures and sequences, SMART can also help them in saving processing time and expense, increasing productivity, improving quality, and adhering more closely to safety and other guidelines. Though SMART was developed for Space Shuttle applications, its interface is easily adaptable to any hardware that can be broken down by component, subcomponent, discrepancy, and repair.
Type A behaviour pattern: a concept revisited.
Rose, M I
1987-01-01
It is generally accepted that the type A behaviour pattern is a risk factor in the development of coronary artery disease (CAD). Type A people have been characterized as hard-driving, competitive, aggressive and hurried. A number of investigators have attempted to correlate these facets of type A behaviour with increased risks of CAD. However, there have been conflicting results, primarily owing to differences in methods and CAD outcomes and inconsistencies associated with measuring the type A behaviour pattern. As a result, researchers have begun to focus on subcomponents of the type A behaviour pattern, particularly hostility and anger, that appear to be more reliable predictors of CAD outcome. A reconceptualization of the type A behaviour pattern is required. PMID:3815195
Everyday robotic action: lessons from human action control
de Kleijn, Roy; Kachergis, George; Hommel, Bernhard
2014-01-01
Robots are increasingly capable of performing everyday human activities such as cooking, cleaning, and doing the laundry. This requires the real-time planning and execution of complex, temporally extended sequential actions under high degrees of uncertainty, which provides many challenges to traditional approaches to robot action control. We argue that important lessons in this respect can be learned from research on human action control. We provide a brief overview of available psychological insights into this issue and focus on four principles that we think could be particularly beneficial for robot control: the integration of symbolic and subsymbolic planning of action sequences, the integration of feedforward and feedback control, the clustering of complex actions into subcomponents, and the contextualization of action-control structures through goal representations. PMID:24672474
The first example of erbium triple-stranded helicates displaying SMM behaviour.
Gorczyński, Adam; Kubicki, Maciej; Pinkowicz, Dawid; Pełka, Robert; Patroniak, Violetta; Podgajny, Robert
2015-10-14
A series of isostructural C3-symmetrical triple stranded dinuclear lanthanide [Ln2L3](NO3)3 molecules have been synthesized using subcomponent self-assembly of Ln(NO3)3 with 2-(methylhydrazino)benzimidazole and 4-tert-butyl-2,6-diformylphenol, where Ln = Tb (1), Dy (2), Ho (3), Er (4), Tm (5), and Yb (6). The temperature dependent and field dependent magnetic properties of 1-6 were modeled using the van Vleck approximation including the crystal field term HCF, the super-exchange term HSE and the Zeeman term HZE. Ferromagnetic interactions were found in 1, 2, 4 and 6, while antiferromagnetic interactions were found in 3 and 5. The erbium analogue reveals field induced SMM behaviour.
Test Plan. GCPS Task 4, subtask 4.2 thrust structure development
NASA Astrophysics Data System (ADS)
Greenberg, H. S.
1994-09-01
The Single Stage To Orbit (SSTO) vehicle is designed to lift off from a vertical position, go into orbit, return to earth for a horizontal landing, and be reusable for the next mission. (NASA baseline only) In order to meet its performance goals, the SSTO relies on light weight structure and the use of 8 tri-propellant engines. These engines are mounted to the thrust structure. This test plan addresses selection of the material for this structure, and the integrity of the design through testing of elements and a full-scale subcomponent. This test plan supports the development of the design for an advanced composite thrust structure for a Single Stage to Orbit manned, heavy launch vehicle. The thrust structure is designed to transmit very high thrust loads from the engines to the rest of the vehicle (see Figure 1 ). The thrust structure will also be used for primary attachment of the twin vertical tails and possibly act as the aft attach point for the wing. The combination of high loading, high vibration, long service life and high acoustic environments will need to be evaluated by tests. To minimize design risk, a building block approach will be used. We will first screen materials to determine which materials show the most promise for this application. Factors in this screening will be the suitability of these materials for chosen design concepts, particularly concerning specific strength, environmental compatibility and applicability to fabrication processes. Next we will characterize two material systems that will be used in the design; the characterization will allow us to generate preliminary design data that will be used for the analysis. Element testing will be performed to evaluate critical structural locations under load. Final testing on the full scale test article will be performed to verify the design and to demonstrate predictability of the analysis. Additionally, risks associated with fabricating full scale thrust structures will be reduced through testing activities. One of the major concerns that stems from full scale fabrication is the realities of size and the associated complexities of handling, manufacturing, and assembly. The need exists to fabricate, assemble and test_representative joint specimens to achieve_confidence in the design and manufacturing technologies being proposed.
Qualifciation test series of the indium needle FEEP micro-propulsion system for LISA Pathfinder
NASA Astrophysics Data System (ADS)
Scharlemann, C.; Buldrini, N.; Killinger, R.; Jentsch, M.; Polli, A.; Ceruti, L.; Serafini, L.; DiCara, D.; Nicolini, D.
2011-11-01
The Laser Interferometer Space Antenna project (LISA) is a co-operative program between ESA and NASA to detect gravitational waves by measuring distortions in the space-time fabric. LISA Pathfinder is the precursor mission to LISA designed to validate the core technologies intended for LISA. One of the enabling technologies is the micro-propulsion system based on field emission thrusters necessary to achieve the uniquely stringent propulsion requirements. A consortium consisting of Astrium GmbH and the University of Applied Sciences Wiener Neustadt (formerly AIT) was commissioned by ESA to develop and qualify the micro-propulsion system based on the Indium Needle FEEP technology. Several successful tests have verified the proper Needle Field Emission Electric Propulsion (FEEP) operation and the thermal and mechanical design of subcomponents of the developed system. For all functional tests, the flight representative Power Control Unit developed by SELEX Galileo S.p.A (also responsible for the Micro-Propulsion Subsystem (MPS) development) was used. Measurements have shown the exceptional stability of the thruster. An acceptance test of one Thruster Cluster Assembly (TCA) over 3600 h has shown the stable long term operation of the developed system. During the acceptance test compliance to all the applicable requirements have been shown such as a thrust resolution of 0.1 μN, thrust range capability between 0 and 100 μN, thrust overshoot much lower than the required 0.3 μN+3% and many others. In particular important is the voltage stability of the thruster (±1% over the duration of the testing) and the confirmation of the very low thrust noise. Based on the acceptance test the lifetime of the thruster is expected to exceed 39,000 h generating a total impulse bit of 6300 Ns at an average thrust level of 50 μN. A flight representative qualification model of the Needle FEEP Cluster Assembly (DM1) equipped with one active TCA has performed a qualification program consisting of acceptance, vibration, shock, and thermal vacuum test. During the last test, the thermal vacuum test (TVT), a performance decrease was observed. According to a preliminary analysis, this performance decrease is not linked to the thermal conditions simulated in the TVT but might be rather linked to secondary effects of the TVT set-up.
Test Plan. GCPS Task 4, subtask 4.2 thrust structure development
NASA Technical Reports Server (NTRS)
Greenberg, H. S.
1994-01-01
The Single Stage To Orbit (SSTO) vehicle is designed to lift off from a vertical position, go into orbit, return to earth for a horizontal landing, and be reusable for the next mission. (NASA baseline only) In order to meet its performance goals, the SSTO relies on light weight structure and the use of 8 tri-propellant engines. These engines are mounted to the thrust structure. This test plan addresses selection of the material for this structure, and the integrity of the design through testing of elements and a full-scale subcomponent. This test plan supports the development of the design for an advanced composite thrust structure for a Single Stage to Orbit manned, heavy launch vehicle. The thrust structure is designed to transmit very high thrust loads from the engines to the rest of the vehicle (see Figure 1 ). The thrust structure will also be used for primary attachment of the twin vertical tails and possibly act as the aft attach point for the wing. The combination of high loading, high vibration, long service life and high acoustic environments will need to be evaluated by tests. To minimize design risk, a building block approach will be used. We will first screen materials to determine which materials show the most promise for this application. Factors in this screening will be the suitability of these materials for chosen design concepts, particularly concerning specific strength, environmental compatibility and applicability to fabrication processes. Next we will characterize two material systems that will be used in the design; the characterization will allow us to generate preliminary design data that will be used for the analysis. Element testing will be performed to evaluate critical structural locations under load. Final testing on the full scale test article will be performed to verify the design and to demonstrate predictability of the analysis. Additionally, risks associated with fabricating full scale thrust structures will be reduced through testing activities. One of the major concerns that stems from full scale fabrication is the realities of size and the associated complexities of handling, manufacturing, and assembly. The need exists to fabricate, assemble and test_representative joint specimens to achieve_confidence in the design and manufacturing technologies being proposed.
Memory timeline: Brain ERP C250 (not P300) is an early biomarker of short-term storage.
Chapman, Robert M; Gardner, Margaret N; Mapstone, Mark; Dupree, Haley M; Antonsdottir, Inga M
2015-04-16
Brain event-related potentials (ERPs) offer a quantitative link between neurophysiological activity and cognitive performance. ERPs were measured while young adults performed a task that required storing a relevant stimulus in short-term memory. Using principal components analysis, ERP component C250 (maximum at 250 ms post-stimulus) was extracted from a set of ERPs that were separately averaged for various task conditions, including stimulus relevancy and stimulus sequence within a trial. C250 was more positive in response to task-specific stimuli that were successfully stored in short-term memory. This relationship between C250 and short-term memory storage of a stimulus was confirmed by a memory probe recall test where the behavioral recall of a stimulus was highly correlated with its C250 amplitude. ERP component P300 (and its subcomponents of P3a and P3b, which are commonly thought to represent memory operations) did not show a pattern of activation reflective of storing task-relevant stimuli. C250 precedes the P300, indicating that initial short-term memory storage may occur earlier than previously believed. Additionally, because C250 is so strongly predictive of a stimulus being stored in short-term memory, C250 may provide a strong index of early memory operations. Copyright © 2015 Elsevier B.V. All rights reserved.
Main Chamber Injectors for Advanced Hydrocarbon Booster Engines
NASA Technical Reports Server (NTRS)
Long, Matthew R.; Bazarov, Vladimir G.; Anderson, William E.
2003-01-01
Achieving the highest possible specific impulse has long been a key driver for space launch systems. Recently, more importance has been placed on the need for increased reliability and streamlined launch operations. These general factors along with more specific mission requirements have provided a new focus that is centered on the oxidizer rich staged combustion (ORSC) cycle. Despite a history of use in Russia that extends back to the 1960's, a proven design methodology for ORSC cycle engines does not exist in the West. This lack of design expertise extends to the main chamber injector, a critical subcomponent that largely determines the engine performance and main chamber life. The goals of the effort described here are to establish an empirical knowledge base to provide a fundamental understanding of main chamber injectors and for verification of an injector design methodology for the ORSC cycle. The design of a baseline injector element, derived from information on Russian engines in the open literature, is presented. The baseline injector comprises a gaseous oxidizer core flow and an annular swirling fuel flow. Sets of equations describing the steady-state and the dynamic characteristics of the injector are presented; these equations, which form the basis of the design analysis methodology, will be verified in tests later this year. On-going cold flow studies, using nitrogen and water as simulants, are described which indicate highly atomized and symmetric sprays.
Smith-Greenaway, Emily
2013-11-01
Mothers' literacy skills are emerging as a key determinant of children's health and survival in low-income contexts, with emphasis on the cognitive and psychological agency that literacy skills provide. This work has clearly established a strong association between mothers' reading skills--a key subcomponent of broader literacy and language skills--and child mortality. However, this relatively nascent literature has not yet considered how broader social structures condition the process. In Nigeria and in sub-Saharan Africa more broadly, gender-based social inequality constrains many mothers' decision-making power over children's health matters; this structural feature may condition the association between mothers' reading skills and child mortality. This paper uses data from the 2003 Nigerian Demographic and Health Survey (N = 12,076) to test the conditionality of the relationship between mothers' reading skills and child survival on mothers' decision-making power, highlighting how structural realities should factor more heavily into this individual-action-oriented literature. Among Nigerian children whose mothers have decision-making power, mothers' reading skills convey a 27 percent lower risk of child mortality; however, for children whose mothers lack decision-making power, mothers' reading skills do not yield a significant survival advantage. Overall, these findings support the need for future work to further analyze how broader social structures condition the benefits of mothers' reading skills for children's health. Copyright © 2013 Elsevier Ltd. All rights reserved.
Smith-Greenaway, Emily
2013-01-01
Mothers’ literacy skills are emerging as a key determinant of children’s health and survival in low-income contexts, with emphasis on the cognitive and psychological agency that literacy skills provide. This work has clearly established a strong association between mothers’ reading skills—a key subcomponent of broader literacy and language skills—and child mortality. However, this relatively nascent literature has not yet considered how broader social structures condition the process. In Nigeria and in sub-Saharan Africa more broadly, gender-based social inequality constrains many mothers’ decision-making power over children’s health matters; this structural feature may condition the association between mothers’ reading skills and child mortality. This paper uses data from the 2003 Nigerian Demographic and Health Survey (N = 12,076) to test the conditionality of the relationship between mothers’ reading skills and child survival on mothers’ decision-making power, highlighting how structural realities should factor more heavily into this individual-action-oriented literature. Among Nigerian children whose mothers have decision-making power, mothers’ reading skills convey a 27 percent lower risk of child mortality; however, for children whose mothers lack decision-making power, mothers’ reading skills do not yield a significant survival advantage. Overall, these findings support the need for future work to further analyze how broader social structures condition the benefits of mothers’ reading skills for children’s health. PMID:24161100
Verma, Nishant; Beretvas, S Natasha; Pascual, Belen; Masdeu, Joseph C; Markey, Mia K
2018-03-14
Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer's disease. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.
Balance impairment in individuals with Wolfram syndrome
Pickett, Kristen A.; Duncan, Ryan P.; Paciorkowski, Alex R.; Permutt, Alan; Marshall, Bess; Hershey, Tamara; Earhart, Gammon M.
2012-01-01
AIM Wolfram syndrome (WFS), a rare neurodegenerative disorder, is characterized by early onset insulin-dependent diabetes mellitus, optic atrophy, deafness, diabetes insipidus, and neurological abnormalities. Although previously unreported, we hypothesized that neurological complications may be detectable in relatively early stages of the disease. As the cerebellum and brainstem seem particularly vulnerable in WFS, we focused on balance functions critically dependent on these regions. The primary goal of this investigation was to compare balance in young individuals with WFS, in relatively early stages of the disease, to an age-matched cohort using a clinically applicable test. METHOD Balance was assessed via the mini-BESTest in 13 children, adolescents and young adults with WFS and 30 typically developing age-matched individuals. RESULTS A significant difference was observed between groups in balance as well as in three of four subcomponents of the mini-BESTest and in two timed tasks related to balance. Mini-BESTest scores were correlated with age (p < 0.001, rs = 0.59) among typically developing individuals. In the WFS group, mini-BESTest scores were related to overall motor dysfunction, but not age. INTERPRETATION Impairments in balance in WFS may occur earlier in the disease process than previously recognized and appear to be related to overall neurological progression rather than chronological age. Recognizing balance impairments and understanding which balance systems contribute to balance deficits in those with WFS may allow for development of effective patient-centered treatment paradigms. PMID:22771154
NAD(P)H oxidase mediates the endothelial barrier dysfunction induced by TNF-alpha.
Gertzberg, Nancy; Neumann, Paul; Rizzo, Victor; Johnson, Arnold
2004-01-01
We tested the hypothesis that the NAD(P)H oxidase-dependent generation of superoxide anion (O2-*) mediates tumor necrosis factor-alpha (TNF)-induced alterations in the permeability of pulmonary microvessel endothelial monolayers (PMEM). The permeability of PMEM was assessed by the clearance rate of Evans blue-labeled albumin. The NAD(P)H oxidase subcomponents p47phox and p22phox were assessed by immunofluorescent microscopy and Western blot. The reactive oxygen species O2-* was measured by the fluorescence of 6-carboxy-2',7'-dichlorodihydrofluorescein diacetatedi(acetoxymethyl ester), 5 (and 6)-chloromethyl-2',7'-dichlorodihydrofluorescein diacetate-acetyl ester, and dihydroethidium. TNF treatment (50 ng/ml for 4.0 h) induced 1) p47phox translocation, 2) an increase in p22phox protein, 3) increased localization of p47phox with p22phox, 4) O2-* generation, and 5) increased permeability to albumin. p22phox antisense oligonucleotide prevented the TNF-induced effect on p22phox, p47phox, O2-*, and permeability. The scrambled nonsense oligonucleotide had no effect. The TNF-induced increase in O2-* and permeability to albumin was also prevented by the O2-* scavenger Cu-Zn superoxide dismutase (100 U/ml). The results indicate that the activation of NAD(P)H oxidase, via the generation of O2-*, mediates TNF-induced barrier dysfunction in PMEM.
Intelligence and psychopathy: a correlational study on insane female offenders.
Spironelli, C; Segrè, D; Stegagno, L; Angrilli, A
2014-01-01
The occurrence of a significant relationship between psychopathic traits and intelligence is still open to debate. Most of the relevant information has been obtained from crystallized IQ tests or on psychopathic male offenders. In this study we hypothesized a negative correlation between psychopathic traits and fluid intelligence on a sample of criminal female in-patients. We carried out a correlational study on a selected sample of 56 criminal female offenders. Variables that were measured include the Hare Psychopathy Checklist Revised (PCL-R) total score (and, separately, the scores from its four subscales: Interpersonal, Affective, Lifestyle and Antisocial) and fluid IQ measured by Raven's Progressive Matrices (RPM). Pearson's correlation between RPM IQ and total PCL-R score was negative (r(54) = -0.55, p < 0.001); women with greater psychopathy traits (total PCL-R score) had lower IQ scores. Negative correlations were also found between IQ and the four PCL-R subscales, Interpersonal, Affective, Lifestyle and Antisocial (r(54) = -0.35, p < 0.01, r(54) = -0.52, p < 0.001, r(54) = -0.53, p < 0.001, and r(54) = -0.49, p < 0.001 respectively). The results indicate a general negative relationship between PCL-R and IQ, equally distributed across the four subcomponents of the psychopathic trait, and support the view that unsuccessful psychopathic women have poor planning and are unable to foresee and represent future consequences of their actions.
The role of decision-making ability in HIV/AIDS: impact on prospective memory.
Coulehan, Kelly; Byrd, Desiree; Arentoft, Alyssa; Monzones, Jennifer; Fuentes, Armando; Fraser, Felicia; Rosario, Ana; Morgello, Susan; Mindt, Monica Rivera
2014-01-01
Prospective memory (ProM), a form of episodic memory related to execution of future intentions, is important for everyday functioning. Among persons living with HIV (PLWH), executive dysfunction is implicated in ProM impairments. However, specific subcomponents of executive functioning involved in ProM deficits remain poorly understood. Unlike more "traditional" neurocognitive (NC) measures of executive functioning associated with dorsolateral prefrontal cortex (i.e., conceptual reasoning, abstraction), those associated with medial orbitofrontal/ventromedial prefrontal (mOF/vmP) cortex (i.e., decision making, inhibitory control, goal-oriented behavior) have yet to be examined in ProM. This study characterized ProM ability in a sample of 89 HIV-seropositive adults and examined the unique role of decision-making ability in ProM. Participants completed a standard NC battery, the Iowa Gambling Task (IGT; a decision-making measure), and the Memory for Intentions Screening Test (MIST; a ProM measure). Correlational analyses revealed that both traditional executive functioning measures and the IGT were associated with ProM. Regression analyses revealed that the IGT significantly predicted ProM, even after accounting for NC measures. Among all NC measures, only executive functioning significantly contributed to ProM. Further examination of mOF/vmP-sensitive executive dysfunction within this population is needed as PLWH may require more tailored treatment recommendations due to specific decision-making difficulties that can impact medication management.
Prichard, George; Weiller, Cornelius; Fritsch, Brita; Reis, Janine
2014-01-01
Noninvasive electrical brain stimulation (NEBS) with transcranial direct current (tDCS) or random noise stimulation (tRNS) applied to the primary motor cortex (M1) can augment motor learning. We tested whether different types of stimulation alter particular aspects of learning a tracing task over three consecutive days, namely skill acquisition (online/within session effects) or consolidation (offline/between session effects). Motor training on a tracing task over three consecutive days was combined with different types and montages of stimulation (tDCS, tRNS). Unilateral M1 stimulation using tRNS as well as unilateral and bilateral M1 tDCS all enhanced motor skill learning compared to sham stimulation. In all groups, this appeared to be driven by online effects without an additional offline effect. Unilateral tDCS resulted in large skill gains immediately following the onset of stimulation, while tRNS exerted more gradual effects. Control stimulation of the right temporal lobe did not enhance skill learning relative to sham. The mechanisms of action of tDCS and tRNS are likely different. Hence, the time course of skill improvement within sessions could point to specific and temporally distinct interactions with the physiological process of motor skill learning. Exploring the parameters of NEBS on different tasks and in patients with brain injury will allow us to maximize the benefits of NEBS for neurorehabilitation. Copyright © 2014 Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Kiser, J. Douglas; Singh, Mrityunjay; Lei, Jin-Fen; Martin, Lisa C.
1999-01-01
A novel attachment approach for positioning sensor lead wires on silicon carbide-based monolithic ceramic and fiber reinforced ceramic matrix composite (FRCMC) components has been developed. This approach is based on an affordable, robust ceramic joining technology, named ARCJoinT, which was developed for the joining of silicon carbide-based ceramic and fiber reinforced composites. The ARCJoinT technique has previously been shown to produce joints with tailorable thickness and good high temperature strength. In this study, silicon carbide-based ceramic and FRCMC attachments of different shapes and sizes were joined onto silicon carbide fiber reinforced silicon carbide matrix (SiC/ SiC) composites having flat and curved surfaces. Based on results obtained in previous joining studies. the joined attachments should maintain their mechanical strength and integrity at temperatures up to 1350 C in air. Therefore they can be used to position and secure sensor lead wires on SiC/SiC components that are being tested in programs that are focused on developing FRCMCs for a number of demanding high temperature applications in aerospace and ground-based systems. This approach, which is suitable for installing attachments on large and complex shaped monolithic ceramic and composite components, should enhance the durability of minimally intrusive high temperature sensor systems. The technology could also be used to reinstall attachments on ceramic components that were damaged in service.
Trends, Opportunities, and Challenges for Tall Wind Turbine and Tower Technologies
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lantz, Eric; Roberts, Owen; Dykes, Katherine
This presentation summarizes recent analysis focused on characterizing the opportunity for Tall Wind technologies generally and for tall tower technologies specifically. It seeks to illuminate and explain the concept of Tall Wind, its impact on the wind industry to date, and the potential value of Tall Wind in the future. It also explores the conditions and locations under which the impacts of Tall Wind offer the most significant potential to increase wind technology performance. In addition, it seeks to examine the status of tall tower technology as a key sub-component of Tall Wind, focusing on the potential for continued innovationmore » in tubular steel wind turbine towers and the status and potential for a select set of alternative tall tower technologies.« less
Wansard, Murielle; Bartolomeo, Paolo; Bastin, Christine; Segovia, Fermín; Gillet, Sophie; Duret, Christophe; Meulemans, Thierry
2015-01-01
Over the last decade, many studies have demonstrated that visuospatial working memory (VSWM) can be divided into separate subsystems dedicated to the retention of visual patterns and their serial order. Impaired VSWM has been suggested to exacerbate left visual neglect in right-brain-damaged individuals. The aim of this study was to investigate the segregation between spatial-sequential and spatial-simultaneous working memory in individuals with neglect. We demonstrated that patterns of results on these VSWM tasks can be dissociated. Spatial-simultaneous and sequential aspects of VSWM can be selectively impaired in unilateral neglect. Our results support the hypothesis of multiple VSWM subsystems, which should be taken into account to better understand neglect-related deficits.
Ryterska, Agata; Jahanshahi, Marjan; Osman, Magda
2014-01-01
Studies examining decision-making in people with Parkinson's disease (PD) show impaired performance on a variety of tasks. However, there are also demonstrations that patients with PD can make optimal decisions just like healthy age-matched controls. We propose that the reason for these mixed findings is that PD does not produce a generalized impairment of decision-making, but rather affects sub-components of this process. In this review we evaluate this hypothesis by considering the empirical evidence examining decision-making in PD. We suggest that of the various stages of the decision-making process, the most affected in PD are (1) the cost-benefit analysis stage and (2) the outcome evaluation stage. We consider the implications of this proposal for research in this area.
NASA Technical Reports Server (NTRS)
Ferragut, N. J.
1982-01-01
The Shuttle Pointed Autonomous Research Tool for Astronomy (SPARTAN) family of spacecraft are intended to operate with minimum interfaces with the U.S. Space Shuttle in order to increase flight opportunities. The SPARTAN I Spacecraft was designed to enhance structural capabilities and increase reliability. The approach followed results from work experience which evolved from sounding rocket projects. Structural models were developed to do the analyses necessary to satisfy safety requirements for Shuttle hardware. A loads analysis must also be performed. Stress analysis calculations will be performed on the main structural elements and subcomponents. Attention is given to design considerations and program definition, the schematic representation of a finite element model used for SPARTAN I spacecraft, details of loads analysis, the stress analysis, and fracture mechanics plan implications.
Transient Finite Element Analyses Developed to Model Fan Containment Impact Events
NASA Technical Reports Server (NTRS)
Pereira, J. Michael
1997-01-01
Research is underway to establish an increased level of confidence in existing numerical techniques for predicting transient behavior when the fan of a jet engine is released and impacts the fan containment system. To evaluate the predictive accuracy that can currently be obtained, researchers at the NASA Lewis Research Center used the DYNA 3D computer code to simulate large-scale subcomponent impact tests that were conducted at the University of Dayton Research Institute (UDRI) Impact Physics Lab. In these tests, 20- by 40-in. flat metal panels, contoured to the shape of a typical fan case, were impacted by the root section of a fan blade. The panels were oriented at an angle to the path of the projectile that would simulate the conditions in an actual blade-out event. The metal panels were modeled in DYNA 3D using a kinematic hardening model with the strain rate dependence of the yield stress governed by the Cowper-Simons rule. Failure was governed by the effective plastic strain criterion. The model of the fan blade and case just after impact is shown. By varying the maximum effective plastic strain, we obtained good qualitative agreement between the model and the experiments. Both the velocity required to penetrate the case and the deflection during impact compared well. This indicates that the failure criterion and constitutive model may be appropriate, but for DYNA 3D to be useful as a predictive tool, methods to determine accurate model parameters must be established. Simple methods for measuring model parameters are currently being developed. In addition, alternative constitutive models and failure criteria are being investigated.
Bidari, Ali; Hassanzadeh, Morteza; Ghavidel Parsa, Banafsheh; Kianmehr, Nahid; Kabir, Ali; Pirhadi, Sara; Sayfi, Mohammad; Toutounchi, Mehrangiz; Fattahi, Fariba; Zandi Karimi, Fereidoon
2013-12-01
The aim of this study was to validate the 2010 American College of Rheumatology (ACR) preliminary criteria for fibromyalgia (FM) in an Iranian population. In this multicenter prospective study, we enrolled 168 FM patients and 110 controls. All participants underwent dolorimetry examination by study assessors and completed a questionnaire containing variables of both the ACR 2010 preliminary and ACR 1990 criteria. We compared the performance of the ACR 2010 criteria with the expert diagnosis as well as the ACR 1990 criteria. Receiver operator characteristic analyses and Youden index were used to evaluate the test characteristics of a set of different cutoff points for two subcomponents of ACR 2010 criteria including widespread pain index (WPI) and symptom severity (SS) scale. Considering expert diagnosis as the gold standard, the ACR 2010 criteria showed comparable specificity with ACR 1990 (92.8 vs. 88.3 %, P = 0.073), but lower sensitivity (58.9 vs. 71.4 %, P = 0.003) and a tendency for lower accuracy (72.4 vs. 78.4 %, P = 0.105). Applying the ACR 1990 criteria as the gold standard, we observed a trend toward an increase in overall accuracy (72.4 vs. 79.1 %, P = 0.064). Optimal test characteristics were achieved for WPI ≥6 and SS scale score ≥4 and improved sensitivity and accuracy of ACR 2010 criteria when compared to expert, 76.1 and 81.7, respectively. The preliminary ACR 2010 criteria performed less desirably in terms of sensitivity in our set of Iranian patients. Selecting lower cutoff points as WPI ≥6 and SS scale score ≥4 improved the diagnostic values of the criteria.
Chen, Xingui; Zhu, Chunyan; Li, Jingjing; Qiu, Linlin; Zhang, Long; Yu, Fengqiong; Ye, Rong; Zhang, Jingjie; Wang, Kai
2013-10-02
There is evidence that women with breast cancer show a cognitive impairment after having undergone chemotherapy treatment; this cognitive impairment may result in behavioral deficits. However, the neural mechanism of this cognitive impairment remains unclear. The present study investigated the neural basis of the cognitive impairment caused by chemotherapy treatment by exploring the decision-making function of the executive subcomponents under ambiguity and risk in breast cancer survivors. Participants included breast cancer patients who had undergone chemotherapy (CT, N=63) or patients who did not undergo chemotherapy (non-CT, N=62), as well as matched healthy controls (HC, N=61). All participants were examined using the Iowa Gambling Task (IGT) to assess their decision-making under ambiguity, the Game of Dice Task (GDT) to assess their decision-making under risk and neuropsychological background tests. Our results indicated that during the IGT test, the chemotherapy-treated breast cancer patients selected from the disadvantageous decks with a higher frequency than the non-treated breast cancer patients or healthy controls, whereas all three groups performed at the same level when performing the GDT. The CT group demonstrated significantly lower scores in several cognitive tasks, including attention, memory, executive functions and cognitive processing, when compared with the other two groups. In addition, within the CT group, significant correlations were found between the IGT performance and information processing, as well as with working memory. This study demonstrated that breast cancer survivors treated with chemotherapy may have selective reductions in IGT performance but unimpaired GDT performance and that these deficits may result from dysfunctions in the limbic loop rather than in the dorsolateral prefrontal loop. © 2013 Elsevier B.V. All rights reserved.
Dore, Kelly L; Reiter, Harold I; Kreuger, Sharyn; Norman, Geoffrey R
2017-05-01
Typically, only a minority of applicants to health professional training are invited to interview. However, pre-interview measures of cognitive skills predict for national licensure scores (Gauer et al. in Med Educ Online 21 2016) and subsequently licensure scores predict for performance in practice (Tamblyn et al. in JAMA 288(23): 3019-3026, 2002; Tamblyn et al. in JAMA 298(9):993-1001, 2007). Assessment of personal and professional characteristics, with the same psychometric rigour of measures of cognitive abilities, are needed upstream in the selection to health profession training programs. To fill that need, Computer-based Assessment for Sampling Personal characteristics (CASPer)-an on-line, video-based screening test-was created. In this paper, we examine the correlation between CASPer and Canadian national licensure examination outcomes in 109 doctors who took CASPer at the time of selection to medical school. Specifically, CASPer scores were correlated against performance on cognitive and 'non-cognitive' subsections of both the Medical Council of Canada Qualifying Examination (MCCQE) Parts I (end of medical school) and Part II (18 months into specialty training). Unlike most national licensure exams, MCCQE has specific subcomponents examining personal/professional qualities, providing a unique opportunity for comparison. The results demonstrated moderate predictive validity of CASPer to national licensure outcomes of personal/professional characteristics three to six years after admission to medical school. These types of disattenuated correlations (r = 0.3-0.5) are not otherwise predicted by traditional screening measures. These data support the ability of a computer-based strategy to screen applicants in a feasible, reliable test, which has now demonstrated predictive validity, lending evidence of its validation for medical school applicant selection.
Mindfulness training modifies subsystems of attention.
Jha, Amism P; Krompinger, Jason; Baime, Michael J
2007-06-01
Mindfulness is defined as paying attention in the present moment. We investigate the hypothesis that mindfulness training may alter or enhance specific aspects of attention. We examined three functionally and neuroanatomically distinct but overlapping attentional subsystems: alerting, orienting, and conflict monitoring. Functioning of each subsystem was indexed by performance on the Attention Network Test. Two types of mindfulness training (MT) programs were examined, and behavioral testing was conducted on participants before (Time 1) and after (Time 2) training. One training group consisted of individuals naive to mindfulness techniques who participated in an 8-week mindfulness-based stress reduction (MBSR) course that emphasized the development of concentrative meditation skills. The other training group consisted of individuals experienced in concentrative meditation techniques who participated in a 1-month intensive mindfulness retreat. Performance of these groups was compared with that of control participants who were meditation naive and received no MT. At Time 1, the participants in the retreat group demonstrated improved conflict monitoring performance relative to those in the MBSR and control groups. At Time 2, the participants in the MBSR course demonstrated significantly improved orienting in comparison with the control and retreat participants. In contrast, the participants in the retreat group demonstrated altered performance on the alerting component, with improvements in exogenous stimulus detection in comparison with the control and MBSR participants. The groups did not differ in conflict monitoring performance at Time 2. These results suggest that mindfulness training may improve attention-related behavioral responses by enhancing functioning of specific subcomponents of attention. Whereas participation in the MBSR course improved the ability to endogenously orient attention, retreat participation appeared to allow for the development and emergence of receptive attentional skills, which improved exogenous alerting-related process.
Hasegawa, Akira; Nishimura, Haruki; Mastuda, Yuko; Kunisato, Yoshihiko; Morimoto, Hiroshi; Adachi, Masaki
This study examined the relationship between trait rumination and the effectiveness of problem solving strategies as assessed by the Means-Ends Problem-Solving Test (MEPS) in a nonclinical population. The present study extended previous studies in terms of using two instructions in the MEPS: the second-person, actual strategy instructions, which has been utilized in previous studies on rumination, and the third-person, ideal-strategy instructions, which is considered more suitable for assessing the effectiveness of problem solving strategies. We also replicated the association between rumination and each dimension of the Social Problem-Solving Inventory-Revised Short Version (SPSI-R:S). Japanese undergraduate students ( N = 223) completed the Beck Depression Inventory-Second Edition, Ruminative Responses Scale (RRS), MEPS, and SPSI-R:S. One half of the sample completed the MEPS with the second-person, actual strategy instructions. The other participants completed the MEPS with the third-person, ideal-strategy instructions. The results showed that neither total RRS score, nor its subscale scores were significantly correlated with MEPS scores under either of the two instructions. These findings taken together with previous findings indicate that in nonclinical populations, trait rumination is not related to the effectiveness of problem solving strategies, but that state rumination while responding to the MEPS deteriorates the quality of strategies. The correlations between RRS and SPSI-R:S scores indicated that trait rumination in general, and its brooding subcomponent in particular are parts of cognitive and behavioral responses that attempt to avoid negative environmental and negative private events. Results also showed that reflection is a part of active problem solving.
Testing the robustness of management decisions to uncertainty: Everglades restoration scenarios.
Fuller, Michael M; Gross, Louis J; Duke-Sylvester, Scott M; Palmer, Mark
2008-04-01
To effectively manage large natural reserves, resource managers must prepare for future contingencies while balancing the often conflicting priorities of different stakeholders. To deal with these issues, managers routinely employ models to project the response of ecosystems to different scenarios that represent alternative management plans or environmental forecasts. Scenario analysis is often used to rank such alternatives to aid the decision making process. However, model projections are subject to uncertainty in assumptions about model structure, parameter values, environmental inputs, and subcomponent interactions. We introduce an approach for testing the robustness of model-based management decisions to the uncertainty inherent in complex ecological models and their inputs. We use relative assessment to quantify the relative impacts of uncertainty on scenario ranking. To illustrate our approach we consider uncertainty in parameter values and uncertainty in input data, with specific examples drawn from the Florida Everglades restoration project. Our examples focus on two alternative 30-year hydrologic management plans that were ranked according to their overall impacts on wildlife habitat potential. We tested the assumption that varying the parameter settings and inputs of habitat index models does not change the rank order of the hydrologic plans. We compared the average projected index of habitat potential for four endemic species and two wading-bird guilds to rank the plans, accounting for variations in parameter settings and water level inputs associated with hypothetical future climates. Indices of habitat potential were based on projections from spatially explicit models that are closely tied to hydrology. For the American alligator, the rank order of the hydrologic plans was unaffected by substantial variation in model parameters. By contrast, simulated major shifts in water levels led to reversals in the ranks of the hydrologic plans in 24.1-30.6% of the projections for the wading bird guilds and several individual species. By exposing the differential effects of uncertainty, relative assessment can help resource managers assess the robustness of scenario choice in model-based policy decisions.
Sleep disturbances and risk of falls in an old Chinese population-Rugao Longevity and Ageing Study.
Ma, Teng; Shi, Guoping; Zhu, Yinsheng; Wang, Yong; Chu, Xuefeng; Jiang, Xiaoyan; Liu, Zuyun; Cai, Jian; Wang, Hongfei; Jin, Li; Wang, Zhendong; Wang, Xiaofeng
2017-11-01
To explore the relationship between sleep disturbances and falls in an elderly Chinese population. Data from 1726 individuals aged 70-87 years from the Rugao Longevity and Ageing Study were used. The Pittsburgh Sleep Quality Index (PSQI) was used to assess sleep variables. Outcomes were falls ≥1 time per year and falls ≥2 times per year. A total of 22.7% of the participants experienced ≥1 fall, and 9.8% experienced ≥2 falls per year. Poor sleep quality was associated with ≥1 fall (OR 1.08, 95% CI 1.05-1.12; OR 1.27, 95% CI 1.14-1.41) and ≥2 falls (OR 1.08, 95% CI 1.03-1.14; OR 1.28, 95% CI 1.10-1.48), with an increase per PSQI score and SD PSQI score, respectively. In addition, sleep quality, sleep latency, sleep efficiency, and sleep disturbance subcomponents were associated with an increased risk of ≥1 fall with ORs of 1.44 (95% CI, 1.21-1.72), 1.23 (95%CI,1.09-1.40), 1.12 (95%CI, 1.01-1.23) and 1.70 (95% CI,1.35-2.14), respectively, and were associated with an increased risk of ≥2 falls with ORs 1.54 (95%CI, 1.22-1.96), 1.21(95%CI, 1.02-1.44), 1.17 (95% CI 1.02-1.33), and 1.78 (95%CI, 1.31-2.44), respectively. Further, participants slept ≤5h per night had an increased risk of ≥1 fall (OR 2.34; 95%CI, 1.59-3.46) and ≥2 falls (OR 2.19; 95%CI, 1.30-3.69). Poor sleep quality and several subcomponent sleep symptoms were consistently associated with increased risk of falls ≥1 time and ≥2 times in Chinese elderly. The identification of sleep disturbances may help identify high-risk Chinese elders who may benefit from fall prevention education. Copyright © 2017 Elsevier B.V. All rights reserved.
España-Romero, Vanesa; Golubic, Rajna; Martin, Kathryn R.; Hardy, Rebecca; Ekelund, Ulf; Kuh, Diana; Wareham, Nicholas J.; Cooper, Rachel; Brage, Soren
2014-01-01
Objectives To compare physical activity (PA) subcomponents from EPIC Physical Activity Questionnaire (EPAQ2) and combined heart rate and movement sensing in older adults. Methods Participants aged 60–64y from the MRC National Survey of Health and Development in Great Britain completed EPAQ2, which assesses self-report PA in 4 domains (leisure time, occupation, transportation and domestic life) during the past year and wore a combined sensor for 5 consecutive days. Estimates of PA energy expenditure (PAEE), sedentary behaviour, light (LPA) and moderate-to-vigorous PA (MVPA) were obtained from EPAQ2 and combined sensing and compared. Complete data were available in 1689 participants (52% women). Results EPAQ2 estimates of PAEE and MVPA were higher than objective estimates and sedentary time and LPA estimates were lower [bias (95% limits of agreement) in men and women were 32.3 (−61.5 to 122.6) and 29.0 (−39.2 to 94.6) kJ/kg/day for PAEE; −4.6 (−10.6 to 1.3) and −6.0 (−10.9 to −1.0) h/day for sedentary time; −171.8 (−454.5 to 110.8) and −60.4 (−367.5 to 246.6) min/day for LPA; 91.1 (−159.5 to 341.8) and 55.4 (−117.2 to 228.0) min/day for MVPA]. There were significant positive correlations between all self-reported and objectively assessed PA subcomponents (rho = 0.12 to 0.36); the strongest were observed for MVPA (rho = 0.30 men; rho = 0.36 women) and PAEE (rho = 0.26 men; rho = 0.25 women). Conclusion EPAQ2 produces higher estimates of PAEE and MVPA and lower estimates of sedentary and LPA than objective assessment. However, both methodologies rank individuals similarly, suggesting that EPAQ2 may be used in etiological studies in this population. PMID:24516543
U-shaped development: an old but unsolved problem.
Pauls, Franz; Macha, Thorsten; Petermann, Franz
2013-01-01
Even today the investigation of U-shaped functions in human development is of considerable importance for different domains of Developmental Psychology. More and more scientific researchers focus their efforts on the challenge to describe and explain the phenomenon by identifying those skills and abilities being affected. The impact of U-shaped functions on diagnostic decision-making and on therapeutic treatment programs highlights the importance of understanding the nature of non-monotonic development. The present article therefore addresses the relevant questions of how U-shaped functions are defined in theory, in which developmental domains such non-monotonic growth curves are suggested to occur, and which implications there are for future methodology and diagnostic practice. Finally, it is recommended to clearly identify those interactions between proximal and distal subcomponents which are expected to contribute to a U-shaped development.
U-Shaped Development: An Old but Unsolved Problem
Pauls, Franz; Macha, Thorsten; Petermann, Franz
2013-01-01
Even today the investigation of U-shaped functions in human development is of considerable importance for different domains of Developmental Psychology. More and more scientific researchers focus their efforts on the challenge to describe and explain the phenomenon by identifying those skills and abilities being affected. The impact of U-shaped functions on diagnostic decision-making and on therapeutic treatment programs highlights the importance of understanding the nature of non-monotonic development. The present article therefore addresses the relevant questions of how U-shaped functions are defined in theory, in which developmental domains such non-monotonic growth curves are suggested to occur, and which implications there are for future methodology and diagnostic practice. Finally, it is recommended to clearly identify those interactions between proximal and distal subcomponents which are expected to contribute to a U-shaped development. PMID:23750146
Scapholunate Interosseous Ligament Anatomy and Biomechanics.
Rajan, Prashant V; Day, Charles S
2015-08-01
Injury to the scapholunate interosseous ligament is one of the most common causes of carpal instability and can impart considerable compromise to the patient's hand function. However, the management of scapholunate ligament injuries remains a dynamic concept, especially with regard to the multitude of options and techniques that exist for its surgical treatment. We present a thorough review of scapholunate anatomy and morphology, and the role of the scapholunate articulations in the kinetics and pathomechanics of wrist instability. We also review the current literature on the biomechanical properties of the scapholunate ligament and its subcomponents. A sound understanding of the anatomy and biomechanics of the scapholunate ligament can clarify its instability and may better orient current reconstructive procedures or pioneer better future techniques. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Gutierrez-Sigut, Eva; Payne, Heather; MacSweeney, Mairéad
2015-01-01
Although there is consensus that the left hemisphere plays a critical role in language processing, some questions remain. Here we examine the influence of overt versus covert speech production on lateralization, the relationship between lateralization and behavioural measures of language performance and the strength of lateralization across the subcomponents of language. The present study used functional transcranial Doppler sonography (fTCD) to investigate lateralization of phonological and semantic fluency during both overt and covert word generation in right-handed adults. The laterality index (LI) was left lateralized in all conditions, and there was no difference in the strength of LI between overt and covert speech. This supports the validity of using overt speech in fTCD studies, another benefit of which is a reliable measure of speech production. PMID:24875468
Moilanen, Kristin L; Padilla-Walker, Laura M; Blaacker, Debra R
2018-02-21
Relatively little is known about the degree to which subcomponents of self-regulation change during early to middle adolescence. This study considered familial predictors (maternal/paternal regulatory support, antagonistic parenting, and parent-child closeness) of rank-order change in behavioral, emotional and cognitive regulation and perseverance over one year. N = 452 adolescents ages 11-16 years and their parents completed questionnaires and parent-child discussion tasks (48.7% male; 69.6% white). Results indicated minimal direct effects of parenting, though maternal and paternal parenting and parent-child closeness exerted small effects that were moderated by prior levels of cognitive regulation and perseverance. Parents may contribute to the development of complex regulatory capacities that mature after foundational emotional and behavioral regulation competencies.
NASA Technical Reports Server (NTRS)
Kypuros, Javier A.; Colson, Rodrigo; Munoz, Afredo
2004-01-01
This paper describes efforts conducted to improve dynamic temperature estimations of a turbine tip clearance system to facilitate design of a generalized tip clearance controller. This work builds upon research previously conducted and presented in and focuses primarily on improving dynamic temperature estimations of the primary components affecting tip clearance (i.e. the rotor, blades, and casing/shroud). The temperature profiles estimated by the previous model iteration, specifically for the rotor and blades, were found to be inaccurate and, more importantly, insufficient to facilitate controller design. Some assumptions made to facilitate the previous results were not valid, and thus improvements are presented here to better match the physical reality. As will be shown, the improved temperature sub- models, match a commercially validated model and are sufficiently simplified to aid in controller design.
NASA Technical Reports Server (NTRS)
DeLaat, John C.; Breisacher, Kevin J.
2000-01-01
Low-emission combustor designs are prone to combustor instabilities. Because active control of these instabilities may allow future combustors to meet both stringent emissions and performance requirements, an experimental combustor rig was developed for investigating methods of actively suppressing combustion instabilities. The experimental rig has features similar to a real engine combustor and exhibits instabilities representative of those in aircraft gas turbine engines. Experimental testing in the spring of 1999 demonstrated that the rig can be tuned to closely represent an instability observed in engine tests. Future plans are to develop and demonstrate combustion instability control using this experimental combustor rig. The NASA Glenn Research Center at Lewis Field is leading the Combustion Instability Control program to investigate methods for actively suppressing combustion instabilities. Under this program, a single-nozzle, liquid-fueled research combustor rig was designed, fabricated, and tested. The rig has many of the complexities of a real engine combustor, including an actual fuel nozzle and swirler, dilution cooling, and an effusion-cooled liner. Prior to designing the experimental rig, a survey of aircraft engine combustion instability experience identified an instability observed in a prototype engine as a suitable candidate for replication. The frequency of the instability was 525 Hz, with an amplitude of approximately 1.5-psi peak-to-peak at a burner pressure of 200 psia. The single-nozzle experimental combustor rig was designed to preserve subcomponent lengths, cross sectional area distribution, flow distribution, pressure-drop distribution, temperature distribution, and other factors previously found to be determinants of burner acoustic frequencies, mode shapes, gain, and damping. Analytical models were used to predict the acoustic resonances of both the engine combustor and proposed experiment. The analysis confirmed that the test rig configuration and engine configuration had similar longitudinal acoustic characteristics, increasing the likelihood that the engine instability would be replicated in the rig. Parametric analytical studies were performed to understand the influence of geometry and condition variations and to establish a combustion test plan. Cold-flow experiments verified that the design values of area and flow distributions were obtained. Combustion test results established the existence of a longitudinal combustion instability in the 500-Hz range with a measured amplitude approximating that observed in the engine. Modifications to the rig configuration during testing also showed the potential for injector independence. The research combustor rig was developed in partnership with Pratt & Whitney of West Palm Beach, Florida, and United Technologies Research Center of East Hartford, Connecticut. Experimental testing of the combustor rig took place at United Technologies Research Center.
The role of decision-making ability in HIV/AIDS: Impact on prospective memory
Coulehan, Kelly; Byrd, Desiree; Arentoft, Alyssa; Monzones, Jennifer; Fuentes, Armando; Fraser, Felicia; Rosario, Ana; Morgello, Susan; Rivera Mindt, Monica
2017-01-01
Background Prospective memory (ProM), a form of episodic memory related to execution of future intentions, is important for everyday functioning. Among persons living with HIV (PLWH), executive dysfunction is implicated in ProM impairments. However, specific subcomponents of executive functioning involved in ProM deficits remain poorly understood. Unlike more “traditional” neurocognitive (NC) measures of executive functioning associated with dorsolateral prefrontal cortex (i.e., conceptual reasoning, abstraction), those associated with medial orbitofrontal/ventromedial prefrontal (mOF/vmP) cortex (i.e., decision making, inhibitory control, goal-oriented behavior) have yet to be examined in ProM. Method This study characterized ProM ability in a sample of 89 HIV-seropositive adults and examined the unique role of decision-making ability in ProM. Participants completed a standard NC battery, the Iowa Gambling Task (IGT; a decision-making measure), and the Memory for Intentions Screening Test (MIST; a ProM measure). Results Correlational analyses revealed that both traditional executive functioning measures and the IGT were associated with ProM. Regression analyses revealed that the IGT significantly predicted ProM, even after accounting for NC measures. Among all NC measures, only executive functioning significantly contributed to ProM. Discussion Further examination of mOF/vmP-sensitive executive dysfunction within this population is needed as PLWH may require more tailored treatment recommendations due to specific decision-making difficulties that can impact medication management. PMID:25089330
Trojsi, Francesca; Siciliano, Mattia; Russo, Antonio; Passaniti, Carla; Femiano, Cinzia; Ferrantino, Teresa; De Liguoro, Stefania; Lavorgna, Luigi; Monsurrò, Maria R; Tedeschi, Gioacchino; Santangelo, Gabriella
2016-01-01
This study aims to explore the potential impairment of Theory of Mind (ToM; i.e., the ability to represent cognitive and affective mental states to both self and others) and the clinical, neuropsychological and Quality of Life (QoL) correlates of these cognitive abnormalities in the early stages of amyotrophic lateral sclerosis (ALS), a multisystem neurodegenerative disease recently recognized as a part of the same clinical and pathological spectrum of frontotemporal lobar degeneration. Twenty-two consecutive, cognitively intact ALS patients, and 15 healthy controls, underwent assessment of executive, verbal comprehension, visuospatial, behavioral, and QoL measures, as well as of the ToM abilities by Emotion Attribution Task (EAT), Advanced Test of ToM (ATT), and Eyes Task (ET). ALS patients obtained significantly lower scores than controls on EAT and ET. No significant difference was found between the two groups on ATT. As regard to type of ALS onset, patients with bulbar onset performed worse than those with spinal onset on ET. Correlation analysis revealed that EAT and ET were positively correlated with education, memory prose, visuo-spatial performances, and "Mental Health" scores among QoL items. Our results suggest that not only "cognitive" but also "affective" subcomponents of ToM may be impaired in the early stages of ALS, with significant linkage to disease onset and dysfunctions of less executively demanding conditions, causing potential impact on patients' "Mental Health."
Zazulak, Joyce; Halgren, Camilla; Tan, Megan; Grierson, Lawrence E M
2015-06-01
Medical education research demonstrates that empathic behaviour is amenable to positive change when targeted through educational programmes. This study evaluates the impact of an arts-based intervention designed to nurture learner empathy through the provision of facilitated visual literacy activities. Health Sciences students (N=19) were assigned to two learning groups: a group that participated in a visual literacy programme at the McMaster Museum of Art and a control group that participated in the normal Health Sciences curriculum. All participants completed an inter-reactivity index, which measures empathy on affective and cognitive levels, prior to and following the programme. Those individuals assigned to the visual literacy programme also completed open-ended questions concerning the programme's impact on their empathic development. The index scores were subjected to independent within-group, between-test analyses. There was no significant impact of the programme on the participants' overall empathic response. However, sub-component analyses revealed that the programme had a significant positive effect on cognitive aspects of empathy. This finding was substantiated by the narrative reports. The study concludes that the affective focus of humanities-based education needs to be enhanced and recommends that learners are educated on the different components that comprise the overall empathic response. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Attentional impairments in Huntington's disease: A specific deficit for the executive conflict.
Maurage, Pierre; Heeren, Alexandre; Lahaye, Magali; Jeanjean, Anne; Guettat, Lamia; Verellen-Dumoulin, Christine; Halkin, Stéphane; Billieux, Joël; Constant, Eric
2017-05-01
Huntington's disease (HD) is characterized by motor and cognitive impairments including memory, executive, and attentional functions. However, because earlier studies relied on multidetermined attentional tasks, uncertainty still abounds regarding the differential deficit across attentional subcomponents. Likewise, the evolution of these deficits during the successive stages of HD remains unclear. The present study simultaneously explored 3 distinct networks of attention (alerting, orienting, executive conflict) in preclinical and clinical HD. Thirty-eight HD patients (18 preclinical) and 38 matched healthy controls completed the attention network test, an integrated and theoretically grounded task assessing the integrity of 3 attentional networks. Preclinical HD was not characterized by any attentional deficit compared to controls. Conversely, clinical HD was associated with a differential deficit across the 3 attentional networks under investigation, showing preserved performance for alerting and orienting networks but massive and specific impairment for the executive conflict network. This indexes an impaired use of executive control to resolve the conflict between task-relevant stimuli and interfering task-irrelevant ones. Clinical HD does not lead to a global attentional deficit but rather to a specific impairment for the executive control of attention. Moreover, the absence of attentional deficits in preclinical HD suggests that these deficits are absent at the initial stages of the disease. In view of their impact on everyday life, attentional deficits should be considered in clinical contexts. Therapeutic programs improving the executive control of attention by neuropsychology and neuromodulation should be promoted. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Testing to Transition the J-2X from Paper to Hardware
NASA Technical Reports Server (NTRS)
Byrd, Tom
2010-01-01
The J-2X Upper Stage Engine (USE) will be the first new human-rated upper stage engine since the Apollo program of the 1960s. It is designed to carry the Ares I and Ares V into orbit and send the Ares V to the Moon as part of NASA's Constellation Program. This paper will provide an overview of progress on the design, testing, and manufacturing of this new engine in 2009 and 2010. The J-2X embodies the program goals of basing the design on proven technology and experience and seeking commonality between the Ares vehicles as a way to minimize risk, shorten development times, and live within current budget constraints. It is based on the proven J-2 engine used on the Saturn IB and Saturn V launch vehicles. The prime contractor for the J-2X is Pratt & Whitney Rocketdyne (PWR), which is under a design, development, test, and engineering (DDT&E) contract covering the period from June 2006 through September 2014. For Ares I, the J-2X will provide engine start at approximately 190,000 feet, operate roughly 500 seconds, and shut down. For Ares V, the J-2X will start at roughly 190,000 feet to place the Earth departure stage (EDS) in orbit, shut down and loiter for up to five days, re-start on command and operate for roughly 300 seconds at its secondary power level to perform trans lunar injection (TLI), followed by final engine shutdown. The J-2X development effort focuses on four key areas: early risk mitigation, design risk mitigation, component and subassembly testing, and engine system testing. Following that plan, the J-2X successfully completed its critical design review (CDR) in 2008, and it has made significant progress in 2009 and 2010 in moving from the drawing board to the machine shop and test stand. Post-CDR manufacturing is well under way, including PWR in-house and vendor hardware. In addition, a wide range of component and sub-component tests have been completed, and more component tests are planned. Testing includes heritage powerpack, turbopump inducer water flow, turbine air flow, turbopump seal testing, main injector and gas generator, injector testing, augmented spark igniter testing, nozzle side loads cold flow testing, nozzle extension film cooling flow testing, control system testing with hardware in the loop, and nozzle extension emissivity coating tests. In parallel with hardware manufacturing, work is progressing on the new A-3 test stand to support full duration altitude testing. The Stennis A-2 test stand is scheduled to be turned over to the Constellation Program in September 2010 to be modified for J-2X testing also. As the structural steel was rising on the A-3 stand, work was under way in the nearby E complex on the chemical steam generator and subscale diffuser concepts to be used to evacuate the A-3 test cell and simulate altitude conditions.
Advanced manufacturing—A transformative enabling capability for fusion
Nygren, Richard E.; Dehoff, Ryan R.; Youchison, Dennis L.; ...
2018-05-24
Additive Manufacturing (AM) can create novel and complex engineered material structures. Features such as controlled porosity, micro-fibers and/or nano-particles, transitions in materials and integral robust coatings can be important in developing solutions for fusion subcomponents. A realistic understanding of this capability would be particularly valuable in identifying development paths. Major concerns for using AM processes with lasers or electron beams that melt powder to make refractory parts are the power required and residual stresses arising in fabrication. A related issue is the required combination of lasers or e-beams to continue heating of deposited material (to reduce stresses) and to depositmore » new material at a reasonable built rate while providing adequate surface finish and resolution for meso-scale features. In conclusion, Some Direct Write processes that can make suitable preforms and be cured to an acceptable density may offer another approach for PFCs.« less
Identification and simulation evaluation of an AH-64 helicopter hover math model
NASA Technical Reports Server (NTRS)
Schroeder, J. A.; Watson, D. C.; Tischler, M. B.; Eshow, M. M.
1991-01-01
Frequency-domain parameter-identification techniques were used to develop a hover mathematical model of the AH-64 Apache helicopter from flight data. The unstable AH-64 bare-airframe characteristics without a stability-augmentation system were parameterized in the convectional stability-derivative form. To improve the model's vertical response, a simple transfer-function model approximating the effects of dynamic inflow was developed. Additional subcomponents of the vehicle were also modeled and simulated, such as a basic engine response for hover and the vehicle stick dynamic characteristics. The model, with and without stability augmentation, was then evaluated by AH-64 pilots in a moving-base simulation. It was the opinion of the pilots that the simulation was a satisfactory representation of the aircraft for the tasks of interest. The principal negative comment was that height control was more difficult in the simulation than in the aircraft.
The scope of culture in chimpanzees, humans and ancestral apes
Whiten, Andrew
2011-01-01
More studies have focused on aspects of chimpanzee behaviour and cognition relevant to the evolution of culture than on any other species except our own. Accordingly, analysis of the features shared by chimpanzees and humans is here used to infer the scope of cultural phenomena in our last common ancestor, at the same time clarifying the nature of the special characteristics that advanced further in the hominin line. To do this, culture is broken down into three major aspects: the large scale, population-level patterning of traditions; social learning mechanisms; and the behavioural and cognitive contents of culture. Each of these is further dissected into subcomponents. Shared features, as well as differences, are identified in as many as a dozen of these, offering a case study for the comparative analysis of culture across animal taxa and a deeper understanding of the roots of our own cultural capacities. PMID:21357222
Skorich, Daniel P; Gash, Tahlia B; Stalker, Katie L; Zheng, Lidan; Haslam, S Alexander
2017-05-01
The social difficulties of autism spectrum disorder (ASD) are typically explained as a disruption in the Shared Attention Mechanism (SAM) sub-component of the theory of mind (ToM) system. In the current paper, we explore the hypothesis that SAM's capacity to construct the self-other-object relations necessary for shared-attention arises from a self-categorization process, which is weaker among those with more autistic-like traits. We present participants with self-categorization and shared-attention tasks, and measure their autism-spectrum quotient (AQ). Results reveal a negative relationship between AQ and shared-attention, via self-categorization, suggesting a role for self-categorization in the disruption in SAM seen in ASD. Implications for intervention, and for a ToM model in which weak central coherence plays a role are discussed.
NASA Astrophysics Data System (ADS)
Sun, De-Zheng; Bryan, Frank
Largely following the order in which the lectures were given in the graduate class on climate dynamics at the University of Colorado, the book starts with the topic of moist convection in the tropics. Summarizing decades-long research into a succinct article, Moncrieff [this volume] reviews the state of the art of understanding of organized precipitating convective systems with an eye to improving the representation of such systems in global weather and climate models. Moncrieff also addresses in this chapter the multi-scale convective organization in the Madden-Julian Oscillation, a major source of intraseasonal variability in the tropics. The second chapter proceeds to a prominent phenomenon on the seasonal time scale: monsoons. In covering this topic, Li [this volume] focuses his analysis on the Asian monsoon and dissects the physical processes that are responsible for its intraseasonal and interannual variability. All three subcomponents of the Asian monsoon are covered here: the Indian monsoon, the East Asian monsoon, and the Western North Pacific monsoon.
Motor skills in children aged 7-10 years, diagnosed with autism spectrum disorder.
Whyatt, Caroline P; Craig, Cathy M
2012-09-01
This study used the Movement Assessment Battery for Children (M-ABC2) to assess motor skills in children aged 7-10 years with autism (n = 18) in comparison to two groups of age-matched typically developing children; a receptive vocabulary matched group (n = 19) and a nonverbal IQ matched group (n = 22). The results supported previous work, as indicated by a significant general motor impairment in the group with autism. However, sub-analysis of the M-ABC2 revealed that there were only 2 out of 8 subcomponent skills which showed universal significant specific deficits for the autism group; i.e. catching a ball and static balance. These results suggest that motor skill deficits associated with autism may not be pervasive but more apparent in activities demanding complex, interceptive actions or core balance ability.
[Language acquisition in preterm infants during the first year of life].
Nazzi, T; Nishibayashi, L L; Berdasco-Muñoz, E; Baud, O; Biran, V; Gonzalez-Gomez, N
2015-10-01
Previous studies have shown that preterm children are at a higher risk for cognitive and language delays than full-term children. Most of these studies have concentrated on the effects of prematurity during the preschool or school years, while the effect of preterm birth on the early development of language, much of which occurs during the first year of life, remains very little explored. This article focuses on this crucial period and reviews the studies that have explored early phonological and lexical development in preterm infants. The results of these studies show uneven proficiency in different language subdomains in preterm infants. This raises the possibility that different constraints apply to the acquisition of different linguistic subcomponents in this population, in part as a result of a complex interaction between maturation, experience, and language subdomains. Copyright © 2015 Elsevier Masson SAS. All rights reserved.