10 CFR 2.1017 - Computation of time.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., event, or default after which the designated period of time begins to run is not included. The last day... where the action or event is to occur, in which event the period runs until the end of the next day... service of a notice or other document upon it, one day shall be added to the prescribed period. If the...

10 CFR 2.1017 - Computation of time.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., event, or default after which the designated period of time begins to run is not included. The last day... where the action or event is to occur, in which event the period runs until the end of the next day... service of a notice or other document upon it, one day shall be added to the prescribed period. If the...

76 FR 73494 - Airworthiness Directives; Turbomeca S.A. Arriel 2B Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... identified in the MCAI. The one-time functional test required by the service bulletin is not a normal engine run-up test: the one-time functional test involves additional requirements including mode switching, that are not part of a normal engine run-up after start. FAA's Determination and Requirements of This...

A Comparison of Priority-based and Incremental Real-Time Garbage Collectors in the Implementation of the Shadow Design Pattern

DTIC Science & Technology

2008-08-15

running the real-time application we used in our previous study on IBM WebSphere Real Time. IBM WebSphere Real Time automatically sets Metronome , its...the experiment show that the modified code for the Shadow Design Pattern runs well under Metronome . 15. NUMBER OF PAGES 25 14. SUBJECT TERMS...includes the real-time garbage collector called the Metronome . Unlike the Sun RTGC, we cannot change the priority of the Metronome RTGC. Metronome is

Predicting low back pain outcome following rehabilitation for low back pain.

PubMed

Roberts, Andrew J; Dew, Angela; Bridger, Robert; Etherington, John; Kilminster, Shaun

2015-01-01

Psychosocial factors are known to play a key role in determining the progress of back pain patients. However, it is not known whether these factors are applicable to military personnel, who tend to be fitter than the general population. The aim was to identify physical and psychological predictors in a prospective study of the outcome of back pain rehabilitation over 6 months and a longer follow-up time of between 15 and 32 months. Two hundred and fifty military personnel reporting for a residential rehabilitation programme completed a battery of physical and psychological tests. The physical tests included 800 m run time and the Biering-Sorensen test. The psychological/psychosocial measures included items on fear avoidance, self efficacy, anxiety and depression and occupational psychosocial factors such as job satisfaction. Self efficacy and 800 m run time predicted self-reported functional ability at 6 months and medical discharge/return to full fitness at 15–32 months. Patients with 800 m run times of more than 3 minutes 31 seconds had a four times greater chance of medical discharge from the Armed forces. Eight hundred metre run time and self-efficacy were independent predictors of both self-reported functional ability at 6 months and return to full fitness/medical discharge at 15–32 months. Self-efficacy also predicted 40% of the variance in the intensity of back pain and 10% of other non-back pain. Rehabilitation should include greater emphasis on physical fitness and on improving self-efficacy.

Performance analysis of local area networks

NASA Technical Reports Server (NTRS)

Alkhatib, Hasan S.; Hall, Mary Grace

1990-01-01

A simulation of the TCP/IP protocol running on a CSMA/CD data link layer was described. The simulation was implemented using the simula language, and object oriented discrete event language. It allows the user to set the number of stations at run time, as well as some station parameters. Those parameters are the interrupt time and the dma transfer rate for each station. In addition, the user may configure the network at run time with stations of differing characteristics. Two types are available, and the parameters of both types are read from input files at run time. The parameters include the dma transfer rate, interrupt time, data rate, average message size, maximum frame size and the average interarrival time of messages per station. The information collected for the network is the throughput and the mean delay per packet. For each station, the number of messages attempted as well as the number of messages successfully transmitted is collected in addition to the throughput and mean packet delay per station.

NEQAIR96,Nonequilibrium and Equilibrium Radiative Transport and Spectra Program: User's Manual

NASA Technical Reports Server (NTRS)

Whiting, Ellis E.; Park, Chul; Liu, Yen; Arnold, James O.; Paterson, John A.

1996-01-01

This document is the User's Manual for a new version of the NEQAIR computer program, NEQAIR96. The program is a line-by-line and a line-of-sight code. It calculates the emission and absorption spectra for atomic and diatomic molecules and the transport of radiation through a nonuniform gas mixture to a surface. The program has been rewritten to make it easy to use, run faster, and include many run-time options that tailor a calculation to the user's requirements. The accuracy and capability have also been improved by including the rotational Hamiltonian matrix formalism for calculating rotational energy levels and Hoenl-London factors for dipole and spin-allowed singlet, doublet, triplet, and quartet transitions. Three sample cases are also included to help the user become familiar with the steps taken to produce a spectrum. A new user interface is included that uses check location, to select run-time options and to enter selected run data, making NEQAIR96 easier to use than the older versions of the code. The ease of its use and the speed of its algorithms make NEQAIR96 a valuable educational code as well as a practical spectroscopic prediction and diagnostic code.

Is There Evidence that Runners can Benefit from Wearing Compression Clothing?

PubMed

Engel, Florian Azad; Holmberg, Hans-Christer; Sperlich, Billy

2016-12-01

Runners at various levels of performance and specializing in different events (from 800 m to marathons) wear compression socks, sleeves, shorts, and/or tights in attempt to improve their performance and facilitate recovery. Recently, a number of publications reporting contradictory results with regard to the influence of compression garments in this context have appeared. To assess original research on the effects of compression clothing (socks, calf sleeves, shorts, and tights) on running performance and recovery. A computerized research of the electronic databases PubMed, MEDLINE, SPORTDiscus, and Web of Science was performed in September of 2015, and the relevant articles published in peer-reviewed journals were thus identified rated using the Physiotherapy Evidence Database (PEDro) Scale. Studies examining effects on physiological, psychological, and/or biomechanical parameters during or after running were included, and means and measures of variability for the outcome employed to calculate Hedges'g effect size and associated 95 % confidence intervals for comparison of experimental (compression) and control (non-compression) trials. Compression garments exerted no statistically significant mean effects on running performance (times for a (half) marathon, 15-km trail running, 5- and 10-km runs, and 400-m sprint), maximal and submaximal oxygen uptake, blood lactate concentrations, blood gas kinetics, cardiac parameters (including heart rate, cardiac output, cardiac index, and stroke volume), body and perceived temperature, or the performance of strength-related tasks after running. Small positive effect sizes were calculated for the time to exhaustion (in incremental or step tests), running economy (including biomechanical variables), clearance of blood lactate, perceived exertion, maximal voluntary isometric contraction and peak leg muscle power immediately after running, and markers of muscle damage and inflammation. The body core temperature was moderately affected by compression, while the effect size values for post-exercise leg soreness and the delay in onset of muscle fatigue indicated large positive effects. Our present findings suggest that by wearing compression clothing, runners may improve variables related to endurance performance (i.e., time to exhaustion) slightly, due to improvements in running economy, biomechanical variables, perception, and muscle temperature. They should also benefit from reduced muscle pain, damage, and inflammation.

The treatment of medial tibial stress syndrome in athletes; a randomized clinical trial

PubMed Central

2012-01-01

Background The only three randomized trials on the treatment of MTSS were all performed in military populations. The treatment options investigated in this study were not previously examined in athletes. This study investigated if functional outcome of three common treatment options for medial tibial stress syndrome (MTSS) in athletes in a non-military setting was the same. Methods The study design was randomized and multi-centered. Physical therapists and sports physicians referred athletes with MTSS to the hospital for inclusion. 81 athletes were assessed for eligibility of which 74 athletes were included and randomized to three treatment groups. Group one performed a graded running program, group two performed a graded running program with additional stretching and strengthening exercises for the calves, while group three performed a graded running program with an additional sports compression stocking. The primary outcome measure was: time to complete a running program (able to run 18 minutes with high intensity) and secondary outcome was: general satisfaction with treatment. Results 74 Athletes were randomized and included of which 14 did not complete the study due a lack of progress (18.9%). The data was analyzed on an intention-to-treat basis. Time to complete a running program and general satisfaction with the treatment were not significantly different between the three treatment groups. Conclusion This was the first randomized trial on the treatment of MTSS in athletes in a non-military setting. No differences were found between the groups for the time to complete a running program. Trial registration CCMO; NL23471.098.08 PMID:22464032

Agglomeration Multigrid for an Unstructured-Grid Flow Solver

NASA Technical Reports Server (NTRS)

Frink, Neal; Pandya, Mohagna J.

2004-01-01

An agglomeration multigrid scheme has been implemented into the sequential version of the NASA code USM3Dns, tetrahedral cell-centered finite volume Euler/Navier-Stokes flow solver. Efficiency and robustness of the multigrid-enhanced flow solver have been assessed for three configurations assuming an inviscid flow and one configuration assuming a viscous fully turbulent flow. The inviscid studies include a transonic flow over the ONERA M6 wing and a generic business jet with flow-through nacelles and a low subsonic flow over a high-lift trapezoidal wing. The viscous case includes a fully turbulent flow over the RAE 2822 rectangular wing. The multigrid solutions converged with 12%-33% of the Central Processing Unit (CPU) time required by the solutions obtained without multigrid. For all of the inviscid cases, multigrid in conjunction with an explicit time-stepping scheme performed the best with regard to the run time memory and CPU time requirements. However, for the viscous case multigrid had to be used with an implicit backward Euler time-stepping scheme that increased the run time memory requirement by 22% as compared to the run made without multigrid.

Running speed during training and percent body fat predict race time in recreational male marathoners.

PubMed

Barandun, Ursula; Knechtle, Beat; Knechtle, Patrizia; Klipstein, Andreas; Rüst, Christoph Alexander; Rosemann, Thomas; Lepers, Romuald

2012-01-01

Recent studies have shown that personal best marathon time is a strong predictor of race time in male ultramarathoners. We aimed to determine variables predictive of marathon race time in recreational male marathoners by using the same characteristics of anthropometry and training as used for ultramarathoners. Anthropometric and training characteristics of 126 recreational male marathoners were bivariately and multivariately related to marathon race times. After multivariate regression, running speed of the training units (β = -0.52, P < 0.0001) and percent body fat (β = 0.27, P < 0.0001) were the two variables most strongly correlated with marathon race times. Marathon race time for recreational male runners may be estimated to some extent by using the following equation (r (2) = 0.44): race time ( minutes) = 326.3 + 2.394 × (percent body fat, %) - 12.06 × (speed in training, km/hours). Running speed during training sessions correlated with prerace percent body fat (r = 0.33, P = 0.0002). The model including anthropometric and training variables explained 44% of the variance of marathon race times, whereas running speed during training sessions alone explained 40%. Thus, training speed was more predictive of marathon performance times than anthropometric characteristics. The present results suggest that low body fat and running speed during training close to race pace (about 11 km/hour) are two key factors for a fast marathon race time in recreational male marathoner runners.

SMC Standard: Evaluation and Test Requirements for Liquid Rocket Engines

DTIC Science & Technology

2017-07-26

Run -Time Trends .................................................................................................... 53 7.2.4 Steady State Analytical...Administration, 2008. 22. M. Singh, J. Vargo, D. Schiffer and J. Dello, “Safe Diagram – A Design and Reliability Tool for Turbine Blading ,” Dresser-Rand...allowed starts and run ‐time including ground acceptance testing, on‐pad firings/aborts, and flight exposure. Part: A single piece (or two or more

The Influence of Running on Foot Posture and In-Shoe Plantar Pressures.

PubMed

Bravo-Aguilar, María; Gijón-Noguerón, Gabriel; Luque-Suarez, Alejandro; Abian-Vicen, Javier

2016-03-01

Running can be considered a high-impact practice, and most people practicing continuous running experience lower-limb injuries. The aim of this study was to determine the influence of 45 min of running on foot posture and plantar pressures. The sample comprised 116 healthy adults (92 men and 24 women) with no foot-related injuries. The mean ± SD age of the participants was 28.31 ± 6.01 years; body mass index, 23.45 ± 1.96; and training time, 11.02 ± 4.22 h/wk. Outcome measures were collected before and after 45 min of running at an average speed of 12 km/h, and included the Foot Posture Index (FPI) and a baropodometric analysis. The results show that foot posture can be modified after 45 min of running. The mean ± SD FPI changed from 6.15 ± 2.61 to 4.86 ± 2.65 (P < .001). Significant decreases in mean plantar pressures in the external, internal, rearfoot, and forefoot edges were found after 45 min of running. Peak plantar pressures in the forefoot decreased after running. The pressure-time integral decreased during the heel strike phase in the internal edge of the foot. In addition, a decrease was found in the pressure-time integral during the heel-off phase in the internal and rearfoot edges. The findings suggest that after 45 min of running, a pronated foot tends to change into a more neutral position, and decreased plantar pressures were found after the run.

The virtual slice setup.

PubMed

Lytton, William W; Neymotin, Samuel A; Hines, Michael L

2008-06-30

In an effort to design a simulation environment that is more similar to that of neurophysiology, we introduce a virtual slice setup in the NEURON simulator. The virtual slice setup runs continuously and permits parameter changes, including changes to synaptic weights and time course and to intrinsic cell properties. The virtual slice setup permits shocks to be applied at chosen locations and activity to be sampled intra- or extracellularly from chosen locations. By default, a summed population display is shown during a run to indicate the level of activity and no states are saved. Simulations can run for hours of model time, therefore it is not practical to save all of the state variables. These, in any case, are primarily of interest at discrete times when experiments are being run: the simulation can be stopped momentarily at such times to save activity patterns. The virtual slice setup maintains an automated notebook showing shocks and parameter changes as well as user comments. We demonstrate how interaction with a continuously running simulation encourages experimental prototyping and can suggest additional dynamical features such as ligand wash-in and wash-out-alternatives to typical instantaneous parameter change. The virtual slice setup currently uses event-driven cells and runs at approximately 2 min/h on a laptop.

Engineering Evaluation and Assessment (EE and A) Report for the Symbolic and Sub-symbolic Robotics Intelligence Control System (SS-RICS)

DTIC Science & Technology

2018-04-01

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions...2006. Since that time , SS-RICS has been the integration platform for many robotics algorithms using a variety of different disciplines from cognitive...voice recognition. Each noise level was run 10 times per gender, yielding 60 total runs. Two paths were chosen for testing (Paths A and B) of

Shallow-Water Nitrox Diving, the NASA Experience

NASA Technical Reports Server (NTRS)

Fitzpatrick, Daniel T.

2009-01-01

NASA s Neutral Buoyancy Laboratory (NBL) contains a 6.2 million gallon, 12-meter deep pool where astronauts prepare for space missions involving space walks (extravehicular activity EVA). Training is conducted in a space suit (extravehicular mobility unit EMU) pressurized to 4.0 - 4.3 PSI for up to 6.5 hours while breathing a 46% NITROX mix. Since the facility opened in 1997, over 30,000 hours of suited training has been completed with no occurrence of decompression sickness (DCS) or oxygen toxicity. This study examines the last 5 years of astronaut suited training runs. All suited runs are computer monitored and data is recorded in the Environmental Control System (ECS) database. Astronaut training runs from 2004 - 2008 were reviewed and specific data including total run time, maximum depth and average depth were analyzed. One hundred twenty seven astronauts and cosmonauts completed 2,231 training runs totaling 12,880 exposure hours. Data was available for 96% of the runs. It was revealed that the suit configuration produces a maximum equivalent air depth of 7 meters, essentially eliminating the risk of DCS. Based on average run depth and time, approximately 17% of the training runs exceeded the NOAA oxygen maximum single exposure limits, with no resulting oxygen toxicity. The NBL suited training protocols are safe and time tested. Consideration should be given to reevaluate the NOAA oxygen exposure limits for PO2 levels at or below 1 ATA.

Running speed during training and percent body fat predict race time in recreational male marathoners

PubMed Central

Barandun, Ursula; Knechtle, Beat; Knechtle, Patrizia; Klipstein, Andreas; Rüst, Christoph Alexander; Rosemann, Thomas; Lepers, Romuald

2012-01-01

Background Recent studies have shown that personal best marathon time is a strong predictor of race time in male ultramarathoners. We aimed to determine variables predictive of marathon race time in recreational male marathoners by using the same characteristics of anthropometry and training as used for ultramarathoners. Methods Anthropometric and training characteristics of 126 recreational male marathoners were bivariately and multivariately related to marathon race times. Results After multivariate regression, running speed of the training units (β = −0.52, P < 0.0001) and percent body fat (β = 0.27, P < 0.0001) were the two variables most strongly correlated with marathon race times. Marathon race time for recreational male runners may be estimated to some extent by using the following equation (r2 = 0.44): race time ( minutes) = 326.3 + 2.394 × (percent body fat, %) − 12.06 × (speed in training, km/hours). Running speed during training sessions correlated with prerace percent body fat (r = 0.33, P = 0.0002). The model including anthropometric and training variables explained 44% of the variance of marathon race times, whereas running speed during training sessions alone explained 40%. Thus, training speed was more predictive of marathon performance times than anthropometric characteristics. Conclusion The present results suggest that low body fat and running speed during training close to race pace (about 11 km/hour) are two key factors for a fast marathon race time in recreational male marathoner runners. PMID:24198587

Fast Running Urban Dispersion Model for Radiological Dispersal Device (RDD) Releases: Model Description and Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gowardhan, Akshay; Neuscamman, Stephanie; Donetti, John

Aeolus is an efficient three-dimensional computational fluid dynamics code based on finite volume method developed for predicting transport and dispersion of contaminants in a complex urban area. It solves the time dependent incompressible Navier-Stokes equation on a regular Cartesian staggered grid using a fractional step method. It also solves a scalar transport equation for temperature and using the Boussinesq approximation. The model also includes a Lagrangian dispersion model for predicting the transport and dispersion of atmospheric contaminants. The model can be run in an efficient Reynolds Average Navier-Stokes (RANS) mode with a run time of several minutes, or a moremore » detailed Large Eddy Simulation (LES) mode with run time of hours for a typical simulation. This report describes the model components, including details on the physics models used in the code, as well as several model validation efforts. Aeolus wind and dispersion predictions are compared to field data from the Joint Urban Field Trials 2003 conducted in Oklahoma City (Allwine et al 2004) including both continuous and instantaneous releases. Newly implemented Aeolus capabilities include a decay chain model and an explosive Radiological Dispersal Device (RDD) source term; these capabilities are described. Aeolus predictions using the buoyant explosive RDD source are validated against two experimental data sets: the Green Field explosive cloud rise experiments conducted in Israel (Sharon et al 2012) and the Full-Scale RDD Field Trials conducted in Canada (Green et al 2016).« less

AlgoRun: a Docker-based packaging system for platform-agnostic implemented algorithms.

PubMed

Hosny, Abdelrahman; Vera-Licona, Paola; Laubenbacher, Reinhard; Favre, Thibauld

2016-08-01

There is a growing need in bioinformatics for easy-to-use software implementations of algorithms that are usable across platforms. At the same time, reproducibility of computational results is critical and often a challenge due to source code changes over time and dependencies. The approach introduced in this paper addresses both of these needs with AlgoRun, a dedicated packaging system for implemented algorithms, using Docker technology. Implemented algorithms, packaged with AlgoRun, can be executed through a user-friendly interface directly from a web browser or via a standardized RESTful web API to allow easy integration into more complex workflows. The packaged algorithm includes the entire software execution environment, thereby eliminating the common problem of software dependencies and the irreproducibility of computations over time. AlgoRun-packaged algorithms can be published on http://algorun.org, a centralized searchable directory to find existing AlgoRun-packaged algorithms. AlgoRun is available at http://algorun.org and the source code under GPL license is available at https://github.com/algorun laubenbacher@uchc.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Intra-dance variation among waggle runs and the design of efficient protocols for honey bee dance decoding.

PubMed

Couvillon, Margaret J; Riddell Pearce, Fiona C; Harris-Jones, Elisabeth L; Kuepfer, Amanda M; Mackenzie-Smith, Samantha J; Rozario, Laura A; Schürch, Roger; Ratnieks, Francis L W

2012-05-15

Noise is universal in information transfer. In animal communication, this presents a challenge not only for intended signal receivers, but also to biologists studying the system. In honey bees, a forager communicates to nestmates the location of an important resource via the waggle dance. This vibrational signal is composed of repeating units (waggle runs) that are then averaged by nestmates to derive a single vector. Manual dance decoding is a powerful tool for studying bee foraging ecology, although the process is time-consuming: a forager may repeat the waggle run 1- >100 times within a dance. It is impractical to decode all of these to obtain the vector; however, intra-dance waggle runs vary, so it is important to decode enough to obtain a good average. Here we examine the variation among waggle runs made by foraging bees to devise a method of dance decoding. The first and last waggle runs within a dance are significantly more variable than the middle run. There was no trend in variation for the middle waggle runs. We recommend that any four consecutive waggle runs, not including the first and last runs, may be decoded, and we show that this methodology is suitable by demonstrating the goodness-of-fit between the decoded vectors from our subsamples with the vectors from the entire dances.

Intra-dance variation among waggle runs and the design of efficient protocols for honey bee dance decoding

PubMed Central

Couvillon, Margaret J.; Riddell Pearce, Fiona C.; Harris-Jones, Elisabeth L.; Kuepfer, Amanda M.; Mackenzie-Smith, Samantha J.; Rozario, Laura A.; Schürch, Roger; Ratnieks, Francis L. W.

2012-01-01

Summary Noise is universal in information transfer. In animal communication, this presents a challenge not only for intended signal receivers, but also to biologists studying the system. In honey bees, a forager communicates to nestmates the location of an important resource via the waggle dance. This vibrational signal is composed of repeating units (waggle runs) that are then averaged by nestmates to derive a single vector. Manual dance decoding is a powerful tool for studying bee foraging ecology, although the process is time-consuming: a forager may repeat the waggle run 1- >100 times within a dance. It is impractical to decode all of these to obtain the vector; however, intra-dance waggle runs vary, so it is important to decode enough to obtain a good average. Here we examine the variation among waggle runs made by foraging bees to devise a method of dance decoding. The first and last waggle runs within a dance are significantly more variable than the middle run. There was no trend in variation for the middle waggle runs. We recommend that any four consecutive waggle runs, not including the first and last runs, may be decoded, and we show that this methodology is suitable by demonstrating the goodness-of-fit between the decoded vectors from our subsamples with the vectors from the entire dances. PMID:23213438

No Dose-Response Effect of Carbohydrate Mouth Rinse Concentration on 5-km Running Performance in Recreational Athletes.

PubMed

Clarke, Neil D; Thomas, James R; Kagka, Marion; Ramsbottom, Roger; Delextrat, Anne

2017-03-01

Clarke, ND, Thomas, JR, Kagka, M, Ramsbottom, R, and Delextrat, A. No dose-response effect of carbohydrate mouth rinse concentration on 5-km running performance in recreational athletes. J Strength Cond Res 31(3): 715-720, 2017-Oral carbohydrate rinsing has been demonstrated to provide beneficial effects on exercise performance of durations of up to 1 hour, albeit predominately in a laboratory setting. The aim of the present study was to investigate the effects of different concentrations of carbohydrate solution mouth rinse on 5-km running performance. Fifteen healthy men (n = 9; mean ± SD age; 42 ± 10 years; height, 177.6 ± 6.1 cm; body mass, 73.9 ± 8.9 kg) and women (n = 6; mean ± SD age, 43 ± 9 years; height, 166.5 ± 4.1 cm; body mass, 65.7 ± 6.8 kg) performed a 5-km running time trial on a track on 4 separate occasions. Immediately before starting the time trial and then after each 1 km, subjects rinsed 25 ml of 0, 3, 6, or 12% maltodextrin for 10 seconds. Mouth rinsing with 0, 3, 6, or 12% maltodextrin did not have a significant effect on the time to complete the time trial (0%, 26:34 ± 4:07 minutes:seconds; 3%, 27:17 ± 4:33 minutes:seconds; 6%, 27:05 ± 3:52 minutes:seconds; 12%, 26:47 ± 4.31 minutes:seconds; p = 0.071; (Equation is included in full-text article.)= 0.15), heart rate (p = 0.095; (Equation is included in full-text article.)= 0.16), rating of perceived exertion (p = 0.195; (Equation is included in full-text article.)= 0.11), blood glucose (p = 0.920; (Equation is included in full-text article.)= 0.01), and blood lactate concentration (p = 0.831; (Equation is included in full-text article.)= 0.02), with only nonsignificant trivial to small differences between concentrations. Results of this study suggest that carbohydrate mouth rinsing provides no ergogenic advantage over an acaloric placebo (0%) and that there is no dose-response relationship between carbohydrate solution concentration and 5-km track running performance.

A novel mouse running wheel that senses individual limb forces: biomechanical validation and in vivo testing

PubMed Central

Roach, Grahm C.; Edke, Mangesh

2012-01-01

Biomechanical data provide fundamental information about changes in musculoskeletal function during development, adaptation, and disease. To facilitate the study of mouse locomotor biomechanics, we modified a standard mouse running wheel to include a force-sensitive rung capable of measuring the normal and tangential forces applied by individual paws. Force data were collected throughout the night using an automated threshold trigger algorithm that synchronized force data with wheel-angle data and a high-speed infrared video file. During the first night of wheel running, mice reached consistent running speeds within the first 40 force events, indicating a rapid habituation to wheel running, given that mice generated >2,000 force-event files/night. Average running speeds and peak normal and tangential forces were consistent throughout the first four nights of running, indicating that one night of running is sufficient to characterize the locomotor biomechanics of healthy mice. Twelve weeks of wheel running significantly increased spontaneous wheel-running speeds (16 vs. 37 m/min), lowered duty factors (ratio of foot-ground contact time to stride time; 0.71 vs. 0.58), and raised hindlimb peak normal forces (93 vs. 115% body wt) compared with inexperienced mice. Peak normal hindlimb-force magnitudes were the primary force component, which were nearly tenfold greater than peak tangential forces. Peak normal hindlimb forces exceed the vertical forces generated during overground running (50-60% body wt), suggesting that wheel running shifts weight support toward the hindlimbs. This force-instrumented running-wheel system provides a comprehensive, noninvasive screening method for monitoring gait biomechanics in mice during spontaneous locomotion. PMID:22723628

Activity Demands During Multi-Directional Team Sports: A Systematic Review.

PubMed

Taylor, Jeffrey B; Wright, Alexis A; Dischiavi, Steven L; Townsend, M Allison; Marmon, Adam R

2017-12-01

Late-stage rehabilitation programs often incorporate 'sport-specific' demands, but may not optimally simulate the in-game volume or intensity of such activities as sprinting, cutting, jumping, and lateral movement. The aim of this review was to characterize, quantify, and compare straight-line running and multi-directional demands during sport competition. A systematic review of PubMed, CINAHL, SPORTDiscus, and Cochrane Central Register of Controlled Trials databases was conducted. Studies that reported time-motion analysis data on straight-line running, accelerations/decelerations, activity changes, jumping, cutting, or lateral movement over the course of an entire competition in a multi-directional sport (soccer, basketball, lacrosse, handball, field hockey, futsal, volleyball) were included. Data was organized based on sport, age level, and sex and descriptive statistics of the frequency, intensity, time, and volume of the characteristics of running and multi-directional demands were extracted from each study. Eighty-one studies were included in the review (n = 47 soccer, n = 11 basketball, n = 9 handball, n = 7 field hockey, n = 3 futsal, n = 4 volleyball). Variability of sport demand data was found across sports, sexes, and age levels. Specifically, soccer and field hockey demanded the most volume of running, while basketball required the highest ratio of high-intensity running to sprinting. Athletes change activity between 500 and 3000 times over the course of a competition, or once every 2-4 s. Studies of soccer reported the most frequent cutting (up to 800 per game), while studies of basketball reported the highest frequency of lateral movement (up to 450 per game). Basketball (42-56 per game), handball (up to 90 per game), and volleyball (up to 35 per game) were found to require the most jumping. These data may provide an incomplete view of an athlete's straight-line running load, considering that only competition and not practice data was provided. Considerable variability exists in the demands of straight-line running and multi-directional demands across sports, competition levels, and sexes, indicating the need for sports medicine clinicians to design future rehabilitation programs with improved specificity (including the type of activity and dosage) to these demands.

PalymSys (TM): An extended version of CLIPS for construction and reasoning using blackboards

NASA Technical Reports Server (NTRS)

Bryson, Travis; Ballard, Dan

1994-01-01

This paper describes PalymSys(TM) -- an extended version of the CLIPS language that is designed to facilitate the implementation of blackboard systems. The paper first describes the general characteristics of blackboards and shows how a control blackboard architecture can be used by AI systems to examine their own behavior and adapt to real-time problem-solving situations by striking a balance between domain and control reasoning. The paper then describes the use of PalymSys in the development of a situation assessment subsystem for use aboard Army helicopters. This system performs real-time inferencing about the current battlefield situation using multiple domain blackboards as well as a control blackboard. A description of the control and domain blackboards and their implementation is presented. The paper also describes modifications made to the standard CLIPS 6.02 language in PalymSys(TM) 2.0. These include: (1) a dynamic Dempster-Shafer belief network whose structure is completely specifiable at run-time in the consequent of a PalymSys(TM) rule, (2) extension of the run command including a continuous run feature that enables the system to run even when the agenda is empty, and (3) a built-in communications link that uses shared memory to communicate with other independent processes.

A High-Throughput Biological Calorimetry Core: Steps to Startup, Run, and Maintain a Multiuser Facility.

PubMed

Yennawar, Neela H; Fecko, Julia A; Showalter, Scott A; Bevilacqua, Philip C

2016-01-01

Many labs have conventional calorimeters where denaturation and binding experiments are setup and run one at a time. While these systems are highly informative to biopolymer folding and ligand interaction, they require considerable manual intervention for cleaning and setup. As such, the throughput for such setups is limited typically to a few runs a day. With a large number of experimental parameters to explore including different buffers, macromolecule concentrations, temperatures, ligands, mutants, controls, replicates, and instrument tests, the need for high-throughput automated calorimeters is on the rise. Lower sample volume requirements and reduced user intervention time compared to the manual instruments have improved turnover of calorimetry experiments in a high-throughput format where 25 or more runs can be conducted per day. The cost and efforts to maintain high-throughput equipment typically demands that these instruments be housed in a multiuser core facility. We describe here the steps taken to successfully start and run an automated biological calorimetry facility at Pennsylvania State University. Scientists from various departments at Penn State including Chemistry, Biochemistry and Molecular Biology, Bioengineering, Biology, Food Science, and Chemical Engineering are benefiting from this core facility. Samples studied include proteins, nucleic acids, sugars, lipids, synthetic polymers, small molecules, natural products, and virus capsids. This facility has led to higher throughput of data, which has been leveraged into grant support, attracting new faculty hire and has led to some exciting publications. © 2016 Elsevier Inc. All rights reserved.

NLSEmagic: Nonlinear Schrödinger equation multi-dimensional Matlab-based GPU-accelerated integrators using compact high-order schemes

NASA Astrophysics Data System (ADS)

Caplan, R. M.

2013-04-01

We present a simple to use, yet powerful code package called NLSEmagic to numerically integrate the nonlinear Schrödinger equation in one, two, and three dimensions. NLSEmagic is a high-order finite-difference code package which utilizes graphic processing unit (GPU) parallel architectures. The codes running on the GPU are many times faster than their serial counterparts, and are much cheaper to run than on standard parallel clusters. The codes are developed with usability and portability in mind, and therefore are written to interface with MATLAB utilizing custom GPU-enabled C codes with the MEX-compiler interface. The packages are freely distributed, including user manuals and set-up files. Catalogue identifier: AEOJ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOJ_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 124453 No. of bytes in distributed program, including test data, etc.: 4728604 Distribution format: tar.gz Programming language: C, CUDA, MATLAB. Computer: PC, MAC. Operating system: Windows, MacOS, Linux. Has the code been vectorized or parallelized?: Yes. Number of processors used: Single CPU, number of GPU processors dependent on chosen GPU card (max is currently 3072 cores on GeForce GTX 690). Supplementary material: Setup guide, Installation guide. RAM: Highly dependent on dimensionality and grid size. For typical medium-large problem size in three dimensions, 4GB is sufficient. Keywords: Nonlinear Schröodinger Equation, GPU, high-order finite difference, Bose-Einstien condensates. Classification: 4.3, 7.7. Nature of problem: Integrate solutions of the time-dependent one-, two-, and three-dimensional cubic nonlinear Schrödinger equation. Solution method: The integrators utilize a fully-explicit fourth-order Runge-Kutta scheme in time and both second- and fourth-order differencing in space. The integrators are written to run on NVIDIA GPUs and are interfaced with MATLAB including built-in visualization and analysis tools. Restrictions: The main restriction for the GPU integrators is the amount of RAM on the GPU as the code is currently only designed for running on a single GPU. Unusual features: Ability to visualize real-time simulations through the interaction of MATLAB and the compiled GPU integrators. Additional comments: Setup guide and Installation guide provided. Program has a dedicated web site at www.nlsemagic.com. Running time: A three-dimensional run with a grid dimension of 87×87×203 for 3360 time steps (100 non-dimensional time units) takes about one and a half minutes on a GeForce GTX 580 GPU card.

Evaluation of bus transit reliability in the District of Columbia.

DOT National Transportation Integrated Search

2013-11-01

Several performance metrics can be used to assess the reliability of a transit system. These include on-time arrivals, travel-time : adherence, run-time adherence, and customer satisfaction, among others. On-time arrival at bus stops is one of the pe...

PPC750 Performance Monitor

NASA Technical Reports Server (NTRS)

Meyer, Donald; Uchenik, Igor

2007-01-01

The PPC750 Performance Monitor (Perfmon) is a computer program that helps the user to assess the performance characteristics of application programs running under the Wind River VxWorks real-time operating system on a PPC750 computer. Perfmon generates a user-friendly interface and collects performance data by use of performance registers provided by the PPC750 architecture. It processes and presents run-time statistics on a per-task basis over a repeating time interval (typically, several seconds or minutes) specified by the user. When the Perfmon software module is loaded with the user s software modules, it is available for use through Perfmon commands, without any modification of the user s code and at negligible performance penalty. Per-task run-time performance data made available by Perfmon include percentage time, number of instructions executed per unit time, dispatch ratio, stack high water mark, and level-1 instruction and data cache miss rates. The performance data are written to a file specified by the user or to the serial port of the computer

Design of ProjectRun21: a 14-week prospective cohort study of the influence of running experience and running pace on running-related injury in half-marathoners.

PubMed

Damsted, Camma; Parner, Erik Thorlund; Sørensen, Henrik; Malisoux, Laurent; Nielsen, Rasmus Oestergaard

2017-11-06

Participation in half-marathon has been steeply increasing during the past decade. In line, a vast number of half-marathon running schedules has surfaced. Unfortunately, the injury incidence proportion for half-marathoners has been found to exceed 30% during 1-year follow-up. The majority of running-related injuries are suggested to develop as overuse injuries, which leads to injury if the cumulative training load over one or more training sessions exceeds the runners' load capacity for adaptive tissue repair. Owing to an increase of load capacity along with adaptive running training, the runners' running experience and pace abilities can be used as estimates for load capacity. Since no evidence-based knowledge exist of how to plan appropriate half-marathon running schedules considering the level of running experience and running pace, the aim of ProjectRun21 is to investigate the association between running experience or running pace and the risk of running-related injury. Healthy runners using Global Positioning System (GPS) watch between 18 and 65 years will be invited to participate in this 14-week prospective cohort study. Runners will be allowed to self-select one of three half-marathon running schedules developed for the study. Running data will be collected objectively by GPS. Injury will be based on the consensus-based time loss definition by Yamato et al.: "Running-related (training or competition) musculoskeletal pain in the lower limbs that causes a restriction on or stoppage of running (distance, speed, duration, or training) for at least 7 days or 3 consecutive scheduled training sessions, or that requires the runner to consult a physician or other health professional". Running experience and running pace will be included as primary exposures, while the exposure to running is pre-fixed in the running schedules and thereby conditioned by design. Time-to-event models will be used for analytical purposes. ProjectRun21 will examine if particular subgroups of runners with certain running experiences and running paces seem to sustain more running-related injuries compared with other subgroups of runners. This will enable sport coaches, physiotherapists as well as the runners to evaluate their injury risk of taking up a 14-week running schedule for half-marathon.

Enabling Web-Based Analysis of CUAHSI HIS Hydrologic Data Using R and Web Processing Services

NASA Astrophysics Data System (ADS)

Ames, D. P.; Kadlec, J.; Bayles, M.; Seul, M.; Hooper, R. P.; Cummings, B.

2015-12-01

The CUAHSI Hydrologic Information System (CUAHSI HIS) provides open access to a large number of hydrological time series observation and modeled data from many parts of the world. Several software tools have been designed to simplify searching and access to the CUAHSI HIS datasets. These software tools include: Desktop client software (HydroDesktop, HydroExcel), developer libraries (WaterML R Package, OWSLib, ulmo), and the new interactive search website, http://data.cuahsi.org. An issue with using the time series data from CUAHSI HIS for further analysis by hydrologists (for example for verification of hydrological and snowpack models) is the large heterogeneity of the time series data. The time series may be regular or irregular, contain missing data, have different time support, and be recorded in different units. R is a widely used computational environment for statistical analysis of time series and spatio-temporal data that can be used to assess fitness and perform scientific analyses on observation data. R includes the ability to record a data analysis in the form of a reusable script. The R script together with the input time series dataset can be shared with other users, making the analysis more reproducible. The major goal of this study is to examine the use of R as a Web Processing Service for transforming time series data from the CUAHSI HIS and sharing the results on the Internet within HydroShare. HydroShare is an online data repository and social network for sharing large hydrological data sets such as time series, raster datasets, and multi-dimensional data. It can be used as a permanent cloud storage space for saving the time series analysis results. We examine the issues associated with running R scripts online: including code validation, saving of outputs, reporting progress, and provenance management. An explicit goal is that the script which is run locally should produce exactly the same results as the script run on the Internet. Our design can be used as a model for other studies that need to run R scripts on the web.

Cultural Diversity in AP Art History

ERIC Educational Resources Information Center

Bolte, Frances R.

2006-01-01

Teaching AP Art History is like running on a treadmill that is moving faster than a teacher can run. Many teachers are out of breath before the end of the term and wonder how in the world they can cover every chapter. Because time is short and art from pre-history through to the present, including the non-European traditions, must be covered, this…

Temporal variation in phenotypic and genotypic traits in two sockeye salmon populations, Tustumena Lake, Alaska

USGS Publications Warehouse

Woody, Carol Ann; Olsen, Jeffrey B.; Reynolds, Joel H.; Bentzen, Paul

2000-01-01

Sockeye salmon Oncorhynchus nerka in two tributary streams (about 20 km apart) of the same lake were compared for temporal variation in phenotypic (length, depth adjusted for length) and genotypic (six microsatellite loci) traits. Peak run time (July 16 versus 11 August) and run duration (43 versus 26 d) differed between streams. Populations were sampled twice, including an overlapping point in time. Divergence at microsatellite loci followed a temporal cline: Population sample groups collected at the same time were not different (F ST = 0), whereas those most separated in time were different (F ST = 0.011, P = 0.001). Although contemporaneous sample groups did not differ significantly in microsatellite genotypes (F ST = 0), phenotypic traits did differ significantly (MANOVA, P < 0.001). Fish from the larger stream were larger; fish from the smaller stream were smaller, suggesting differential fitness related to size. Results indicate run time differences among and within sockeye salmon populations may strongly influence levels of gene flow.

Diagnostic Value of Run Chart Analysis: Using Likelihood Ratios to Compare Run Chart Rules on Simulated Data Series

PubMed Central

Anhøj, Jacob

2015-01-01

Run charts are widely used in healthcare improvement, but there is little consensus on how to interpret them. The primary aim of this study was to evaluate and compare the diagnostic properties of different sets of run chart rules. A run chart is a line graph of a quality measure over time. The main purpose of the run chart is to detect process improvement or process degradation, which will turn up as non-random patterns in the distribution of data points around the median. Non-random variation may be identified by simple statistical tests including the presence of unusually long runs of data points on one side of the median or if the graph crosses the median unusually few times. However, there is no general agreement on what defines “unusually long” or “unusually few”. Other tests of questionable value are frequently used as well. Three sets of run chart rules (Anhoej, Perla, and Carey rules) have been published in peer reviewed healthcare journals, but these sets differ significantly in their sensitivity and specificity to non-random variation. In this study I investigate the diagnostic values expressed by likelihood ratios of three sets of run chart rules for detection of shifts in process performance using random data series. The study concludes that the Anhoej rules have good diagnostic properties and are superior to the Perla and the Carey rules. PMID:25799549

Economic optimization software applied to JFK airport heating and cooling plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gay, R.R.; McCoy, L.

This paper describes the on-line economic optimization routine developed by Enter Software, Inc. for application at the heating and cooling plant for the JFK International Airport near New York City. The objective of the economic optimization is to find the optimum plant configuration (which gas turbines to run, power levels of each gas turbine, duct firing levels, which auxiliary water heaters to run, which electric chillers to run, and which absorption chillers to run) which produces maximum net income at the plant as plant loads and the prices vary. The routines also include a planner which runs a series ofmore » optimizations over multiple plant configurations to simulate the varying plant operating conditions for the purpose of predicting the overall plant results over a period of time.« less

Influence of short-term unweighing and reloading on running kinetics and muscle activity.

PubMed

Sainton, Patrick; Nicol, Caroline; Cabri, Jan; Barthelemy-Montfort, Joëlle; Berton, Eric; Chavet, Pascale

2015-05-01

In running, body weight reduction is reported to result in decreased lower limb muscle activity with no change in the global activation pattern (Liebenberg et al. in J Sports Sci 29:207-214). Our study examined the acute effects on running mechanics and lower limb muscle activity of short-term unweighing and reloading conditions while running on a treadmill with a lower body positive pressure (LBPP) device. Eleven healthy males performed two randomized running series of 9 min at preferred speed. Each series included three successive running conditions of 3 min [at 100 % body weight (BW), 60 or 80 % BW, and 100 % BW]. Vertical ground reaction force and center of mass accelerations were analyzed together with surface EMG activity recorded from six major muscles of the left lower limb for the first and last 30 s of each running condition. Effort sensation and mean heart rate were also recorded. In both running series, the unloaded running pattern was characterized by a lower step frequency (due to increased flight time with no change in contact time), lower impact and active force peaks, and also by reduced loading rate and push-off impulse. Amplitude of muscle activity overall decreased, but pre-contact and braking phase extensor muscle activity did not change, whereas it was reduced during the subsequent push-off phase. The combined neuro-mechanical changes suggest that LBPP technology provides runners with an efficient support during the stride. The after-effects recorded after reloading highlight the fact that 3 min of unweighing may be sufficient for updating the running pattern.

Generalized run-and-turn motions: From bacteria to Lévy walks

NASA Astrophysics Data System (ADS)

Detcheverry, François

2017-07-01

Swimming bacteria exhibit a repertoire of motility patterns, in which persistent motion is interrupted by turning events. What are the statistical properties of such random walks? If some particular instances have long been studied, the general case where turning times do not follow a Poisson process has remained unsolved. We present a generic extension of the continuous time random walks formalism relying on operators and noncommutative calculus. The approach is first applied to a unimodal model of bacterial motion. We examine the existence of a minimum in velocity correlation function and discuss the maximum of diffusivity at an optimal value of rotational diffusion. The model is then extended to bimodal patterns and includes as particular cases all swimming strategies: run-and-tumble, run-stop, run-reverse and run-reverse-flick. We characterize their velocity correlation functions and investigate how bimodality affects diffusivity. Finally, the wider applicability of the method is illustrated by considering curved trajectories and Lévy walks. Our results are relevant for intermittent motion of living beings, be they swimming micro-organisms or crawling cells.

EnergyPlus Run Time Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong, Tianzhen; Buhl, Fred; Haves, Philip

2008-09-20

EnergyPlus is a new generation building performance simulation program offering many new modeling capabilities and more accurate performance calculations integrating building components in sub-hourly time steps. However, EnergyPlus runs much slower than the current generation simulation programs. This has become a major barrier to its widespread adoption by the industry. This paper analyzed EnergyPlus run time from comprehensive perspectives to identify key issues and challenges of speeding up EnergyPlus: studying the historical trends of EnergyPlus run time based on the advancement of computers and code improvements to EnergyPlus, comparing EnergyPlus with DOE-2 to understand and quantify the run time differences,more » identifying key simulation settings and model features that have significant impacts on run time, and performing code profiling to identify which EnergyPlus subroutines consume the most amount of run time. This paper provides recommendations to improve EnergyPlus run time from the modeler?s perspective and adequate computing platforms. Suggestions of software code and architecture changes to improve EnergyPlus run time based on the code profiling results are also discussed.« less

The LHCb Run Control

NASA Astrophysics Data System (ADS)

Alessio, F.; Barandela, M. C.; Callot, O.; Duval, P.-Y.; Franek, B.; Frank, M.; Galli, D.; Gaspar, C.; Herwijnen, E. v.; Jacobsson, R.; Jost, B.; Neufeld, N.; Sambade, A.; Schwemmer, R.; Somogyi, P.

2010-04-01

LHCb has designed and implemented an integrated Experiment Control System. The Control System uses the same concepts and the same tools to control and monitor all parts of the experiment: the Data Acquisition System, the Timing and the Trigger Systems, the High Level Trigger Farm, the Detector Control System, the Experiment's Infrastructure and the interaction with the CERN Technical Services and the Accelerator. LHCb's Run Control, the main interface used by the experiment's operator, provides access in a hierarchical, coherent and homogeneous manner to all areas of the experiment and to all its sub-detectors. It allows for automated (or manual) configuration and control, including error recovery, of the full experiment in its different running modes. Different instances of the same Run Control interface are used by the various sub-detectors for their stand-alone activities: test runs, calibration runs, etc. The architecture and the tools used to build the control system, the guidelines and components provided to the developers, as well as the first experience with the usage of the Run Control will be presented

Criterion-Related Validity of the Distance- and Time-Based Walk/Run Field Tests for Estimating Cardiorespiratory Fitness: A Systematic Review and Meta-Analysis.

PubMed

Mayorga-Vega, Daniel; Bocanegra-Parrilla, Raúl; Ornelas, Martha; Viciana, Jesús

2016-01-01

The main purpose of the present meta-analysis was to examine the criterion-related validity of the distance- and time-based walk/run tests for estimating cardiorespiratory fitness among apparently healthy children and adults. Relevant studies were searched from seven electronic bibliographic databases up to August 2015 and through other sources. The Hunter-Schmidt's psychometric meta-analysis approach was conducted to estimate the population criterion-related validity of the following walk/run tests: 5,000 m, 3 miles, 2 miles, 3,000 m, 1.5 miles, 1 mile, 1,000 m, ½ mile, 600 m, 600 yd, ¼ mile, 15 min, 12 min, 9 min, and 6 min. From the 123 included studies, a total of 200 correlation values were analyzed. The overall results showed that the criterion-related validity of the walk/run tests for estimating maximum oxygen uptake ranged from low to moderate (rp = 0.42-0.79), with the 1.5 mile (rp = 0.79, 0.73-0.85) and 12 min walk/run tests (rp = 0.78, 0.72-0.83) having the higher criterion-related validity for distance- and time-based field tests, respectively. The present meta-analysis also showed that sex, age and maximum oxygen uptake level do not seem to affect the criterion-related validity of the walk/run tests. When the evaluation of an individual's maximum oxygen uptake attained during a laboratory test is not feasible, the 1.5 mile and 12 min walk/run tests represent useful alternatives for estimating cardiorespiratory fitness. As in the assessment with any physical fitness field test, evaluators must be aware that the performance score of the walk/run field tests is simply an estimation and not a direct measure of cardiorespiratory fitness.

40 CFR 209.12 - Time.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Time. 209.12 Section 209.12 Protection... Issued Under Section 11(d) of the Noise Control Act § 209.12 Time. (a) In computing any period of time... period of time begins to run shall not be included, except as otherwise provided. Saturdays, Sundays, and...

40 CFR 209.12 - Time.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Time. 209.12 Section 209.12 Protection... Issued Under Section 11(d) of the Noise Control Act § 209.12 Time. (a) In computing any period of time... period of time begins to run shall not be included, except as otherwise provided. Saturdays, Sundays, and...

40 CFR 209.12 - Time.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Time. 209.12 Section 209.12 Protection... Issued Under Section 11(d) of the Noise Control Act § 209.12 Time. (a) In computing any period of time... period of time begins to run shall not be included, except as otherwise provided. Saturdays, Sundays, and...

40 CFR 209.12 - Time.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Time. 209.12 Section 209.12 Protection... Issued Under Section 11(d) of the Noise Control Act § 209.12 Time. (a) In computing any period of time... period of time begins to run shall not be included, except as otherwise provided. Saturdays, Sundays, and...

40 CFR 209.12 - Time.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Time. 209.12 Section 209.12 Protection... Issued Under Section 11(d) of the Noise Control Act § 209.12 Time. (a) In computing any period of time... period of time begins to run shall not be included, except as otherwise provided. Saturdays, Sundays, and...

Principled Design of an Augmented Reality Trainer for Medics

DTIC Science & Technology

2018-04-13

retake test is scheduled. In addition, extensive simulation capstone scenarios are run with a full body manikin that includes airway management...platform so they could run with high quality graphical resolution. We updated the underlying data models to reflect the training scenario parameters...Sedeh, P., Schumann, M., & Groeben, H. (2009). Laryngoscopy via Macintosh blade versus GlideScope: Success rate and time for endotracheal intubation

Behavioral assessment of intermittent wheel running and individual housing in mice in the laboratory.

PubMed

Pham, Therese M; Brené, Stefan; Baumans, Vera

2005-01-01

Physical cage enrichment--exercise devices for rodents in the laboratory--often includes running wheels. This study compared responses of mice in enriched physical and social conditions and in standard social conditions to wheel running, individual housing, and open-field test. The study divided into 6 groups, 48 female BALB/c mice group housed in enriched and standard conditions. On alternate days, the study exposed 2 groups to individual running wheel cages. It intermittently separated from their cage mates and housed individually 2 groups with no running wheels; 2 control groups remained in enriched or standard condition cages. There were no significant differences between enriched and standard group housed mice in alternate days' wheel running. Over time, enriched, group housed mice ran less. Both groups responded similarly to individual housing. In open-field test, mice exposed to individual housing without running wheel moved more and faster than wheel running and home cage control mice. They have lower body weights than group housed and wheel running mice. Intermittent withdrawal of individual housing affects the animals more than other commodities. Wheel running normalizes some effects of intermittent separation from the enriched, social home cage.

Statistical fingerprinting for malware detection and classification

DOEpatents

Prowell, Stacy J.; Rathgeb, Christopher T.

2015-09-15

A system detects malware in a computing architecture with an unknown pedigree. The system includes a first computing device having a known pedigree and operating free of malware. The first computing device executes a series of instrumented functions that, when executed, provide a statistical baseline that is representative of the time it takes the software application to run on a computing device having a known pedigree. A second computing device executes a second series of instrumented functions that, when executed, provides an actual time that is representative of the time the known software application runs on the second computing device. The system detects malware when there is a difference in execution times between the first and the second computing devices.

Changes in the flagellar bundling time account for variations in swimming behavior of flagellated bacteria in viscous media

NASA Astrophysics Data System (ADS)

Qu, Zijie; Temel, Fatma; Henderikx, Rene; Breuer, Kenneth

2017-11-01

The motility of bacteria E.coli in viscous fluids has been widely studied, although conflicting results on the effect of viscosity on swimming speed abound. The swimming mode of wild-type E.coli is idealized as a run-and-tumble sequence in which periods of straight swimming at a constant speed are randomly interrupted by a tumble, defined as a sudden change of direction with a very low speed. Using a tracking microscope, we follow cells for extended time and find that the swimming behavior of a single cell can exhibit a variety of behaviors including run-and-tumble and ``slow-random-walk'' in which the cells move at relatively low speed without the characteristic run. Although the characteristic swimming speed varies between individuals and in different polymer solutions, we find that the skewness of the speed distribution is solely a function of viscosity, and uniquely determines the ratio of the average speed to the characteristic run speed. Using Resistive Force Theory and the cell-specific measured characteristic run speed, we show that differences in the swimming behavior observed in solutions of different viscosity are due to changes in the flagellar bundling time, which increases as the viscosity rises, due to lower rotation rate of the flagellar motor. National Science Foundation.

40 CFR 22.7 - Computation and extension of time.

Code of Federal Regulations, 2014 CFR

2014-07-01

... provided, the day of the event from which the designated period begins to run shall not be included... days shall be added to the time allowed by these Consolidated Rules of Practice for the filing of a...

On the Go with Oxygen

MedlinePlus

... to run the concentrator for 150 percent of travel time (including layovers). What should I consider when traveling ... amtrak.com , or you can inquire at the time you make your reservation. For travel in other countries, contact the carrier. What should ...

Colt: an experiment in wormhole run-time reconfiguration

NASA Astrophysics Data System (ADS)

Bittner, Ray; Athanas, Peter M.; Musgrove, Mark

1996-10-01

Wormhole run-time reconfiguration (RTR) is an attempt to create a refined computing paradigm for high performance computational tasks. By combining concepts from field programmable gate array (FPGA) technologies with data flow computing, the Colt/Stallion architecture achieves high utilization of hardware resources, and facilitates rapid run-time reconfiguration. Targeted mainly at DSP-type operations, the Colt integrated circuit -- a prototype wormhole RTR device -- compares favorably to contemporary DSP alternatives in terms of silicon area consumed per unit computation and in computing performance. Although emphasis has been placed on signal processing applications, general purpose computation has not been overlooked. Colt is a prototype that defines an architecture not only at the chip level but also in terms of an overall system design. As this system is realized, the concept of wormhole RTR will be applied to numerical computation and DSP applications including those common to image processing, communications systems, digital filters, acoustic processing, real-time control systems and simulation acceleration.

Biomechanical characteristics of skeletal muscles and associations between running speed and contraction time in 8- to 13-year-old children.

PubMed

Završnik, Jernej; Pišot, Rado; Šimunič, Boštjan; Kokol, Peter; Blažun Vošner, Helena

2017-02-01

Objective To investigate associations between running speeds and contraction times in 8- to 13-year-old children. Method This longitudinal study analyzed tensiomyographic measurements of vastus lateralis and biceps femoris muscles' contraction times and maximum running speeds in 107 children (53 boys, 54 girls). Data were evaluated using multiple correspondence analysis. Results A gender difference existed between the vastus lateralis contraction times and running speeds. The running speed was less dependent on vastus lateralis contraction times in boys than in girls. Analysis of biceps femoris contraction times and running speeds revealed that running speeds of boys were much more structurally associated with contraction times than those of girls, for whom the association seemed chaotic. Conclusion Joint category plots showed that contraction times of biceps femoris were associated much more closely with running speed than those of the vastus lateralis muscle. These results provide insight into a new dimension of children's development.

CrocoBLAST: Running BLAST efficiently in the age of next-generation sequencing.

PubMed

Tristão Ramos, Ravi José; de Azevedo Martins, Allan Cézar; da Silva Delgado, Gabrielle; Ionescu, Crina-Maria; Ürményi, Turán Peter; Silva, Rosane; Koca, Jaroslav

2017-11-15

CrocoBLAST is a tool for dramatically speeding up BLAST+ execution on any computer. Alignments that would take days or weeks with NCBI BLAST+ can be run overnight with CrocoBLAST. Additionally, CrocoBLAST provides features critical for NGS data analysis, including: results identical to those of BLAST+; compatibility with any BLAST+ version; real-time information regarding calculation progress and remaining run time; access to partial alignment results; queueing, pausing, and resuming BLAST+ calculations without information loss. CrocoBLAST is freely available online, with ample documentation (webchem.ncbr.muni.cz/Platform/App/CrocoBLAST). No installation or user registration is required. CrocoBLAST is implemented in C, while the graphical user interface is implemented in Java. CrocoBLAST is supported under Linux and Windows, and can be run under Mac OS X in a Linux virtual machine. jkoca@ceitec.cz. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

21 CFR 810.3 - Computation of time.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Computation of time. 810.3 Section 810.3 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES... of time begins to run shall not be included. The computation of time is based only on working days. ...

21 CFR 810.3 - Computation of time.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Computation of time. 810.3 Section 810.3 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES... of time begins to run shall not be included. The computation of time is based only on working days. ...

NONMEMory: a run management tool for NONMEM.

PubMed

Wilkins, Justin J

2005-06-01

NONMEM is an extremely powerful tool for nonlinear mixed-effect modelling and simulation of pharmacokinetic and pharmacodynamic data. However, it is a console-based application whose output does not lend itself to rapid interpretation or efficient management. NONMEMory has been created to be a comprehensive project manager for NONMEM, providing detailed summary, comparison and overview of the runs comprising a given project, including the display of output data, simple post-run processing, fast diagnostic plots and run output management, complementary to other available modelling aids. Analysis time ought not to be spent on trivial tasks, and NONMEMory's role is to eliminate these as far as possible by increasing the efficiency of the modelling process. NONMEMory is freely available from http://www.uct.ac.za/depts/pha/nonmemory.php.

artdaq: DAQ software development made simple

NASA Astrophysics Data System (ADS)

Biery, Kurt; Flumerfelt, Eric; Freeman, John; Ketchum, Wesley; Lukhanin, Gennadiy; Rechenmacher, Ron

2017-10-01

For a few years now, the artdaq data acquisition software toolkit has provided numerous experiments with ready-to-use components which allow for rapid development and deployment of DAQ systems. Developed within the Fermilab Scientific Computing Division, artdaq provides data transfer, event building, run control, and event analysis functionality. This latter feature includes built-in support for the art event analysis framework, allowing experiments to run art modules for real-time filtering, compression, disk writing and online monitoring. As art, also developed at Fermilab, is also used for offline analysis, a major advantage of artdaq is that it allows developers to easily switch between developing online and offline software. artdaq continues to be improved. Support for an alternate mode of running whereby data from some subdetector components are only streamed if requested has been added; this option will reduce unnecessary DAQ throughput. Real-time reporting of DAQ metrics has been implemented, along with the flexibility to choose the format through which experiments receive the reports; these formats include the Ganglia, Graphite and syslog software packages, along with flat ASCII files. Additionally, work has been performed investigating more flexible modes of online monitoring, including the capability to run multiple online monitoring processes on different hosts, each running its own set of art modules. Finally, a web-based GUI interface through which users can configure details of their DAQ system has been implemented, increasing the ease of use of the system. Already successfully deployed on the LArlAT, DarkSide-50, DUNE 35ton and Mu2e experiments, artdaq will be employed for SBND and is a strong candidate for use on ICARUS and protoDUNE. With each experiment comes new ideas for how artdaq can be made more flexible and powerful. The above improvements will be described, along with potential ideas for the future.

Injuries in Runners; A Systematic Review on Risk Factors and Sex Differences

PubMed Central

van der Worp, Maarten P.; ten Haaf, Dominique S. M.; van Cingel, Robert; de Wijer, Anton; Nijhuis-van der Sanden, Maria W. G.; Staal, J. Bart

2015-01-01

Background The popularity of running continues to increase, which means that the incidence of running-related injuries will probably also continue to increase. Little is known about risk factors for running injuries and whether they are sex-specific. Objectives The aim of this study was to review information about risk factors and sex-specific differences for running-induced injuries in adults. Search Strategy The databases PubMed, EMBASE, CINAHL and Psych-INFO were searched for relevant articles. Selection Criteria Longitudinal cohort studies with a minimal follow-up of 1 month that investigated the association between risk factors (personal factors, running/training factors and/or health and lifestyle factors) and the occurrence of lower limb injuries in runners were included. Data Collection and Analysis Two reviewers’ independently selected relevant articles from those identified by the systematic search and assessed the risk of bias of the included studies. The strength of the evidence was determined using a best-evidence rating system. Sex differences in risk were determined by calculating the sex ratio for risk factors (the risk factor for women divided by the risk factor for men). Main Results Of 400 articles retrieved, 15 longitudinal studies were included, of which 11 were considered high-quality studies and 4 moderate-quality studies. Overall, women were at lower risk than men for sustaining running-related injuries. Strong and moderate evidence was found that a history of previous injury and of having used orthotics/inserts was associated with an increased risk of running injuries. Age, previous sports activity, running on a concrete surface, participating in a marathon, weekly running distance (30–39 miles) and wearing running shoes for 4 to 6 months were associated with a greater risk of injury in women than in men. A history of previous injuries, having a running experience of 0–2 years, restarting running, weekly running distance (20–29 miles) and having a running distance of more than 40 miles per week were associated with a greater risk of running-related injury in men than in women. Conclusions Previous injury and use of orthotic/inserts are risk factors for running injuries. There appeared to be differences in the risk profile of men and women, but as few studies presented results for men and women separately, the results should be interpreted with caution. Further research should attempt to minimize methodological bias by paying attention to recall bias for running injuries, follow-up time, and the participation rate of the identified target group. PMID:25706955

High Rate of Return to Running for Athletes After Hip Arthroscopy for the Treatment of Femoroacetabular Impingement and Capsular Plication.

PubMed

Levy, David M; Kuhns, Benjamin D; Frank, Rachel M; Grzybowski, Jeffrey S; Campbell, Kirk A; Brown, Sara; Nho, Shane J

2017-01-01

Femoroacetabular impingement (FAI) is most commonly diagnosed in athletes who sustain repetitive flexion loading to their hips. No studies to date have focused solely on patients' return-to-running ability after hip arthroscopy. To evaluate patients' ability to return to running after hip arthroscopy for FAI and capsular plication. Case series; Level of evidence, 4. Clinical data were retrospectively retrieved for 51 consecutive patients with FAI (22 men, 29 women) who had undergone hip arthroscopy for the treatment of FAI and identified themselves as recreational or competitive runners on intake forms. Two-year outcome measures included the modified Harris Hip Score (mHHS) and the Hip Outcome Score Activities of Daily Living (HOS-ADL) and Sport-Specific (HOS-SS) subscales. A postoperative return-to-running survey was used to obtain running-specific information. Patient age and body mass index (BMI) were a mean (±SD) of 26.3 ± 7.8 years and 23.7 ± 3.3 kg/m 2 , respectively. Before surgery, patients had refrained from running because of pain for a mean of 8.1 ± 5.7 months. After surgery, 48 patients (94%) returned to running at a mean of 8.5 ± 4.2 months. Patients who had discontinued running for more than 8 months before surgery had a longer return-to-running time than did those who had stopped for less than 8 months (10.6 ± 4.2 vs 7.6 ± 4.1 months; P = .01). After 2 years, mean preoperative distance had decreased significantly ( P < .01) from 9.5 ± 6.5 miles per week when healthy to 6.4 ± 5.8 miles postoperatively. Despite decreased mileage, all 2-year outcomes scores improved significantly ( P < .001). Recreational and competitive runners with FAI returned to running 94% of the time at a mean of 8.5 months after hip arthroscopy. However, runners should be counseled before their surgery that they may run fewer miles than when they were pain free. Additionally, patients with a higher BMI and/or longer preoperative lull may have a longer recovery time.

5 CFR 841.109 - Computation of time.

Code of Federal Regulations, 2011 CFR

2011-01-01

....109 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS... Computation of time. In computing a period of time for filing documents, the day of the action or event after... included unless it is a Saturday, a Sunday, or a legal holiday; in this event, the period runs until the...

20 CFR 802.221 - Computation of time.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Computation of time. 802.221 Section 802.221 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR RULES OF PRACTICE AND PROCEDURE Prereview... provide otherwise, the day from which the designated period of time begins to run shall not be included...

Improving Running Times for the Determination of Fractional Snow-Covered Area from Landsat TM/ETM+ via Utilization of the CUDA® Programming Paradigm

NASA Astrophysics Data System (ADS)

McGibbney, L. J.; Rittger, K.; Painter, T. H.; Selkowitz, D.; Mattmann, C. A.; Ramirez, P.

2014-12-01

As part of a JPL-USGS collaboration to expand distribution of essential climate variables (ECV) to include on-demand fractional snow cover we describe our experience and implementation of a shift towards the use of NVIDIA's CUDA® parallel computing platform and programming model. In particular the on-demand aspect of this work involves the improvement (via faster processing and a reduction in overall running times) for determination of fractional snow-covered area (fSCA) from Landsat TM/ETM+. Our observations indicate that processing tasks associated with remote sensing including the Snow Covered Area and Grain Size Model (SCAG) when applied to MODIS or LANDSAT TM/ETM+ are computationally intensive processes. We believe the shift to the CUDA programming paradigm represents a significant improvement in the ability to more quickly assert the outcomes of such activities. We use the TMSCAG model as our subject to highlight this argument. We do this by describing how we can ingest a LANDSAT surface reflectance image (typically provided in HDF format), perform spectral mixture analysis to produce land cover fractions including snow, vegetation and rock/soil whilst greatly reducing running time for such tasks. Within the scope of this work we first document the original workflow used to assert fSCA for Landsat TM and it's primary shortcomings. We then introduce the logic and justification behind the switch to the CUDA paradigm for running single as well as batch jobs on the GPU in order to achieve parallel processing. Finally we share lessons learned from the implementation of myriad of existing algorithms to a single set of code in a single target language as well as benefits this ultimately provides scientists at the USGS.

Reducing EnergyPlus Run Time For Code Compliance Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Athalye, Rahul A.; Gowri, Krishnan; Schultz, Robert W.

2014-09-12

Integration of the EnergyPlus ™ simulation engine into performance-based code compliance software raises a concern about simulation run time, which impacts timely feedback of compliance results to the user. EnergyPlus annual simulations for proposed and code baseline building models, and mechanical equipment sizing result in simulation run times beyond acceptable limits. This paper presents a study that compares the results of a shortened simulation time period using 4 weeks of hourly weather data (one per quarter), to an annual simulation using full 52 weeks of hourly weather data. Three representative building types based on DOE Prototype Building Models and threemore » climate zones were used for determining the validity of using a shortened simulation run period. Further sensitivity analysis and run time comparisons were made to evaluate the robustness and run time savings of using this approach. The results of this analysis show that the shortened simulation run period provides compliance index calculations within 1% of those predicted using annual simulation results, and typically saves about 75% of simulation run time.« less

Level-2 Milestone 3244: Deploy Dawn ID Machine for Initial Science Runs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, D

2009-09-21

This report documents the delivery, installation, integration, testing, and acceptance of the Dawn system, ASC L2 milestone 3244: Deploy Dawn ID Machine for Initial Science Runs, due September 30, 2009. The full text of the milestone is included in Attachment 1. The description of the milestone is: This milestone will be a result of work started three years ago with the planning for a multi-petaFLOPS UQ-focused platform (Sequoia) and will be satisfied when a smaller ID version of the final system is delivered, installed, integrated, tested, accepted, and deployed at LLNL for initial science runs in support of SSP mission.more » The deliverable for this milestone will be a LA petascale computing system (named Dawn) usable for code development and scaling necessary to ensure effective use of a final Sequoia platform (expected in 2011-2012), and for urgent SSP program needs. Allocation and scheduling of Dawn as an LA system will likely be performed informally, similar to what has been used for BlueGene/L. However, provision will be made to allow for dedicated access times for application scaling studies across the entire Dawn resource. The milestone was completed on April 1, 2009, when science runs began running on the Dawn system. The following sections describe the Dawn system architecture, current status, installation and integration time line, and testing and acceptance process. A project plan is included as Attachment 2. Attachment 3 is a letter certifying the handoff of the system to a nuclear weapons stockpile customer. Attachment 4 presents the results of science runs completed on the system.« less

Simulation Study of Evacuation Control Center Operations Analysis

DTIC Science & Technology

2011-06-01

28 4.3 Baseline Manning (Runs 1, 2, & 3) . . . . . . . . . . . . 30 4.3.1 Baseline Statistics Interpretation...46 Appendix B. Key Statistic Matrix: Runs 1-12 . . . . . . . . . . . . . 48 Appendix C. Blue Dart...Completion Time . . . 33 11. Paired T result - Run 5 v. Run 6: ECC Completion Time . . . 35 12. Key Statistics : Run 3 vs. Run 9

Simulation of ozone production in a complex circulation region using nested grids

NASA Astrophysics Data System (ADS)

Taghavi, M.; Cautenet, S.; Foret, G.

2004-06-01

During the ESCOMPTE precampaign (summer 2000, over Southern France), a 3-day period of intensive observation (IOP0), associated with ozone peaks, has been simulated. The comprehensive RAMS model, version 4.3, coupled on-line with a chemical module including 29 species, is used to follow the chemistry of the polluted zone. This efficient but time consuming method can be used because the code is installed on a parallel computer, the SGI 3800. Two runs are performed: run 1 with a single grid and run 2 with two nested grids. The simulated fields of ozone, carbon monoxide, nitrogen oxides and sulfur dioxide are compared with aircraft and surface station measurements. The 2-grid run looks substantially better than the run with one grid because the former takes the outer pollutants into account. This on-line method helps to satisfactorily retrieve the chemical species redistribution and to explain the impact of dynamics on this redistribution.

Analysis of Running and Technical Performance in Substitute Players in International Male Rugby Union Competition.

PubMed

Lacome, Mathieu; Piscione, Julien; Hager, Jean-Philippe; Carling, Christopher

2016-09-01

To investigate the patterns and performance of substitutions in 18 international 15-a-side men's rugby union matches. A semiautomatic computerized time-motion system compiled 750 performance observations for 375 players (422 forwards, 328 backs). Running and technical-performance measures included total distance run, high-intensity running (>18.0 km/h), number of individual ball possessions and passes, percentage of passes completed, and number of attempted and percentage of successful tackles. A total of 184 substitutions (85.2%) were attributed to tactical and 32 (14.8%) to injury purposes respectively. The mean period for non-injury-purpose substitutions in backs (17.7%) occurred between 70 and 75 min, while forward substitutions peaked equally between 50-55 and 60-65 min (16.4%). Substitutes generally demonstrated improved running performance compared with both starter players who completed games and players whom they replaced (small differences, ES -0.2 to 0.5) in both forwards and backs over their entire time played. There was also a trend for better running performance in forward and back substitutes over their first 10 min of play compared with the final 10 min for replaced players (small to moderate differences, ES 0.3-0.6). Finally, running performance in both forward and back substitutes was generally lower (ES -0.1 to 0.3, unclear or small differences) over their entire 2nd-half time played compared with their first 10 min of play. The impact of substitutes on technical performance was generally considered unclear. This information provides practitioners with practical data relating to the physical and technical contributions of substitutions that subsequently could enable optimization of their impact on match play.

Asymmetry in Determinants of Running Speed During Curved Sprinting.

PubMed

Ishimura, Kazuhiro; Sakurai, Shinji

2016-08-01

This study investigates the potential asymmetries between inside and outside legs in determinants of curved running speed. To test these asymmetries, a deterministic model of curved running speed was constructed based on components of step length and frequency, including the distances and times of different step phases, takeoff speed and angle, velocities in different directions, and relative height of the runner's center of gravity. Eighteen athletes sprinted 60 m on the curved path of a 400-m track; trials were recorded using a motion-capture system. The variables were calculated following the deterministic model. The average speeds were identical between the 2 sides; however, the step length and frequency were asymmetric. In straight sprinting, there is a trade-off relationship between the step length and frequency; however, such a trade-off relationship was not observed in each step of curved sprinting in this study. Asymmetric vertical velocity at takeoff resulted in an asymmetric flight distance and time. The runners changed the running direction significantly during the outside foot stance because of the asymmetric centripetal force. Moreover, the outside leg had a larger tangential force and shorter stance time. These asymmetries between legs indicated the outside leg plays an important role in curved sprinting.

Coupled Ocean-Atmosphere Dynamics and Predictability of MJO’s

DTIC Science & Technology

2012-09-30

developed. b. Modeling study of the mechanisms of surface chlorophyll modulation by the MJO Previous studies analyzed ocean color satellite data and...to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data ...with Gupta, SIO) e. Run SCOAR2 in downscaling mode for the 2nd MJO event during the DYNAMO period (led by Seo, WHOI, with Miller, SIO) f. Run and

Accelerating Molecular Dynamic Simulation on Graphics Processing Units

PubMed Central

Friedrichs, Mark S.; Eastman, Peter; Vaidyanathan, Vishal; Houston, Mike; Legrand, Scott; Beberg, Adam L.; Ensign, Daniel L.; Bruns, Christopher M.; Pande, Vijay S.

2009-01-01

We describe a complete implementation of all-atom protein molecular dynamics running entirely on a graphics processing unit (GPU), including all standard force field terms, integration, constraints, and implicit solvent. We discuss the design of our algorithms and important optimizations needed to fully take advantage of a GPU. We evaluate its performance, and show that it can be more than 700 times faster than a conventional implementation running on a single CPU core. PMID:19191337

Running as Interoceptive Exposure for Decreasing Anxiety Sensitivity: Replication and Extension.

PubMed

Sabourin, Brigitte C; Stewart, Sherry H; Watt, Margo C; Krigolson, Olav E

2015-01-01

A brief, group cognitive behavioural therapy with running as the interoceptive exposure (IE; exposure to physiological sensations) component was effective in decreasing anxiety sensitivity (AS; fear of arousal sensations) levels in female undergraduates (Watt et al., Anxiety and Substance Use Disorders: The Vicious Cycle of Comorbidity, 201-219, 2008). Additionally, repeated exposure to running resulted in decreases in cognitive (i.e., catastrophic thoughts) and affective (i.e., feelings of anxiety) reactions to running over time for high AS, but not low AS, participants (Sabourin et al., "Physical exercise as interoceptive exposure within a brief cognitive-behavioral treatment for anxiety-sensitive women", Journal of Cognitive Psychotherapy, 22:302-320, 2008). A follow-up study including the above-mentioned intervention with an expanded IE component also resulted in decreases in AS levels (Sabourin et al., under review). The goals of the present process study were (1) to replicate the original process study, with the expanded IE component, and (2) to determine whether decreases in cognitive, affective, and/or somatic (physiological sensations) reactions to running would be related to decreases in AS. Eighteen high AS and 10 low AS participants completed 20 IE running trials following the 3-day group intervention. As predicted, high AS participants, but not low AS participants, experienced decreases in cognitive, affective, and somatic reactions to running over time. Furthermore, decreases in cognitive and affective, but not in somatic, reactions to running were related to decreases in AS levels. These results suggest that the therapeutic effects of repeated exposure to running in decreasing sensitivity to anxiety-related sensations are not related to decreasing the experience of somatic sensations themselves. Rather, they are related to altering the cognitive and affective reactions to these sensations.

The Dependability of Classroom Observations.

ERIC Educational Resources Information Center

Hiatt, Diana Buell; Keesling, J. Ward

A generalizability study of timed observations was conducted in 25 primary grade classes to observe teachers' use of time--for instruction, evaluation of instruction, and classroom management--according to the hour and day observed. Observational methods used by on-site researchers included videotape, checklists, running documentaries, frequency…

Effects of Physical Training and Fitness on Running Injuries in Physically Active Young Men.

PubMed

Grier, Tyson L; Canham-Chervak, Michelle; Anderson, Morgan K; Bushman, Timothy T; Jones, Bruce H

2017-01-01

Grier, TL, Canham-Chervak, M, Anderson, MK, Bushman, TT, and Jones, BH. Effects of physical training and fitness on running injuries in physically active young men. J Strength Cond Res 31(1): 207-216, 2017-The purpose of this investigation was to determine the effects of physical training (PT) and fitness on risks for running-related injuries (RRIs) in physically active young men. Personal characteristics, PT, Army Physical Fitness Test scores, and injury data were obtained by survey. Army Physical Fitness Test variables (push-ups, sit-ups, and 2-mile run) were converted into quartiles (Q), where Q1 = lowest performance and Q4 = highest performance. Odds ratios (OR) and 95% confidence intervals (95% CI) were calculated using multivariate logistic regression. Over 4,000 (n = 4,236) soldiers were surveyed. Running injury incidence was 14%. A greater risk of an RRI was associated with older age (OR31+/<22 years = 1.62, 95% CI, 1.21-2.18), higher BMI ((Equation is included in full-text article.)), and total distance ran per week during unit PT (OR16.1+/1-5 miles = 1.66, 95% CI, 1.15-2.41). A lower risk of an RRI was associated with total distance run per week during personal PT (OR5.1-10/1-5 miles = 0.70, 95% CI, 0.53-0.91, OR10.1-16 +/1-5 miles = 0.58, 95% CI, 0.35-0.97, OR16.1+/1-5 miles = 0.54, 95% CI, 0.30-0.98), higher aerobic endurance as measured by 2-mile run performance (ORQ4/Q1 = 0.50, 95% CI, 0.35-0.72), and unit resistance training ≥3 times a week (OR≥3 times per week/none = 0.46, 95% CI, 0.29-0.73). Greater personal PT running mileage decreased injuries in this population suggesting that the increased protective effect of higher aerobic fitness outweighed the injurious effect of running more miles during personal PT. Countermeasures to prevent RRIs could entail enhancing aerobic endurance, providing opportunities for personal aerobic training, monitoring for excessive unit PT running mileage and encouraging unit resistance training ≥3 times per week.

Running Habits of Competitive Runners During Pregnancy and Breastfeeding

PubMed Central

Tenforde, Adam S.; Toth, Kierann E. S.; Langen, Elizabeth; Fredericson, Michael; Sainani, Kristin L.

2015-01-01

Background: Running is a popular sport that may be performed safely during pregnancy. Few studies have characterized running behavior of competitive female runners during pregnancy and breastfeeding. Hypothesis: Women modify their running behavior during pregnancy and breastfeeding. Study Design: Observational, cross-sectional study. Level of evidence: Level 2. Methods: One hundred ten female long-distance runners who ran competitively prior to pregnancy completed an online survey characterizing training attitudes and behaviors during pregnancy and postpartum. Results: Seventy percent of runners ran some time during their pregnancy (or pregnancies), but only 31% ran during their third trimester. On average, women reduced training during pregnancy, including cutting their intensity to about half of their nonpregnant running effort. Only 3.9% reported sustaining a running injury while pregnant. Fewer than one third (29.9%) selected fetal health as a reason to continue running during pregnancy. Of the women who breastfed, 84.1% reported running during breastfeeding. Most felt that running had no effect on their ability to breastfeed. Women who ran during breastfeeding were less likely to report postpartum depression than those who did not run (6.7% vs 23.5%, P = 0.051), but we did not detect the same association of running during pregnancy (6.5% vs 15.2%, P = 0.16). Conclusion: Women runners reported a reduction in total training while pregnant, and few sustained running injuries during pregnancy. The effect of running on postpartum depression was not clear from our findings. Clinical Relevance: We characterized running behaviors during pregnancy and breastfeeding in competitive runners. Most continue to run during pregnancy but reduce total training effort. Top reasons for running during pregnancy were fitness, health, and maintaining routine; the most common reason for not running was not feeling well. Most competitive runners run during breastfeeding with little perceived impact. PMID:25984264

Tolerance of centrifuge-simulated suborbital spaceflight by medical condition.

PubMed

Blue, Rebecca S; Pattarini, James M; Reyes, David P; Mulcahy, Robert A; Garbino, Alejandro; Mathers, Charles H; Vardiman, Johnené L; Castleberry, Tarah L; Vanderploeg, James M

2014-07-01

We examined responses of volunteers with known medical disease to G forces in a centrifuge to evaluate how potential commercial spaceflight participants (SFPs) might tolerate the forces of spaceflight despite significant medical history. Volunteers were recruited based upon suitability for each of five disease categories (hypertension, cardiovascular disease, diabetes, lung disease, back or neck problems) or a control group. Subjects underwent seven centrifuge runs over 2 d. Day 1 consisted of two +G(z) runs (peak = +3.5 G(z), Run 2) and two +G(x), runs (peak = +6.0 G(x), Run 4). Day 2 consisted of three runs approximating suborbital spaceflight profiles (combined +G(x) and +G(z), peak = +6.0 G(x)/+4.0 G(z)). Data collected included blood pressure, electrocardiogram, pulse oximetry, neurovestibular exams, and post-run questionnaires regarding motion sickness, disorientation, grayout, and other symptoms. A total of 335 subjects registered for participation, of which 86 (63 men, 23 women, age 20-78 yr) participated in centrifuge trials. The most common causes for disqualification were weight and severe and uncontrolled medical or psychiatric disease. Five subjects voluntarily withdrew from the second day of testing: three for anxiety reasons, one for back strain, and one for time constraints. Maximum hemodynamic values recorded included HR of 192 bpm, systolic BP of 217 mmHg, and diastolic BP of 144 mmHg. Common subjective complaints included grayout (69%), nausea (20%), and chest discomfort (6%). Despite their medical history, no subject experienced significant adverse physiological responses to centrifuge profiles. These results suggest that most individuals with well-controlled medical conditions can withstand acceleration forces of launch and re-entry profiles of current commercial spaceflight vehicles.

Time-dependent onshore tsunami response

USGS Publications Warehouse

Apotsos, Alex; Gelfenbaum, Guy R.; Jaffe, Bruce E.

2012-01-01

While bulk measures of the onshore impact of a tsunami, including the maximum run-up elevation and inundation distance, are important for hazard planning, the temporal evolution of the onshore flow dynamics likely controls the extent of the onshore destruction and the erosion and deposition of sediment that occurs. However, the time-varying dynamics of actual tsunamis are even more difficult to measure in situ than the bulk parameters. Here, a numerical model based on the non-linear shallow water equations is used to examine the effects variations in the wave characteristics, bed slope, and bottom roughness have on the temporal evolution of the onshore flow. Model results indicate that the onshore flow dynamics vary significantly over the parameter space examined. For example, the flow dynamics over steep, smooth morphologies tend to be temporally symmetric, with similar magnitude velocities generated during the run-up and run-down phases of inundation. Conversely, on shallow, rough onshore topographies the flow dynamics tend to be temporally skewed toward the run-down phase of inundation, with the magnitude of the flow velocities during run-up and run-down being significantly different. Furthermore, for near-breaking tsunami waves inundating over steep topography, the flow velocity tends to accelerate almost instantaneously to a maximum and then decrease monotonically. Conversely, when very long waves inundate over shallow topography, the flow accelerates more slowly and can remain steady for a period of time before beginning to decelerate. These results indicate that a single set of assumptions concerning the onshore flow dynamics cannot be applied to all tsunamis, and site specific analyses may be required.

Leisure-time running reduces all-cause and cardiovascular mortality risk.

PubMed

Lee, Duck-Chul; Pate, Russell R; Lavie, Carl J; Sui, Xuemei; Church, Timothy S; Blair, Steven N

2014-08-05

Although running is a popular leisure-time physical activity, little is known about the long-term effects of running on mortality. The dose-response relations between running, as well as the change in running behaviors over time, and mortality remain uncertain. We examined the associations of running with all-cause and cardiovascular mortality risks in 55,137 adults, 18 to 100 years of age (mean age 44 years). Running was assessed on a medical history questionnaire by leisure-time activity. During a mean follow-up of 15 years, 3,413 all-cause and 1,217 cardiovascular deaths occurred. Approximately 24% of adults participated in running in this population. Compared with nonrunners, runners had 30% and 45% lower adjusted risks of all-cause and cardiovascular mortality, respectively, with a 3-year life expectancy benefit. In dose-response analyses, the mortality benefits in runners were similar across quintiles of running time, distance, frequency, amount, and speed, compared with nonrunners. Weekly running even <51 min, <6 miles, 1 to 2 times, <506 metabolic equivalent-minutes, or <6 miles/h was sufficient to reduce risk of mortality, compared with not running. In the analyses of change in running behaviors and mortality, persistent runners had the most significant benefits, with 29% and 50% lower risks of all-cause and cardiovascular mortality, respectively, compared with never-runners. Running, even 5 to 10 min/day and at slow speeds <6 miles/h, is associated with markedly reduced risks of death from all causes and cardiovascular disease. This study may motivate healthy but sedentary individuals to begin and continue running for substantial and attainable mortality benefits. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Leisure-Time Running Reduces All-Cause and Cardiovascular Mortality Risk

PubMed Central

Lee, Duck-chul; Pate, Russell R.; Lavie, Carl J.; Sui, Xuemei; Church, Timothy S.; Blair, Steven N.

2014-01-01

Background Although running is a popular leisure-time physical activity, little is known about the long-term effects of running on mortality. The dose-response relations between running, as well as the change in running behaviors over time and mortality remain uncertain. Objectives We examined the associations of running with all-cause and cardiovascular mortality risks in 55,137 adults, aged 18 to 100 years (mean age, 44). Methods Running was assessed on the medical history questionnaire by leisure-time activity. Results During a mean follow-up of 15 years, 3,413 all-cause and 1,217 cardiovascular deaths occurred. Approximately, 24% of adults participated in running in this population. Compared with non-runners, runners had 30% and 45% lower adjusted risks of all-cause and cardiovascular mortality, respectively, with a 3-year life expectancy benefit. In dose-response analyses, the mortality benefits in runners were similar across quintiles of running time, distance, frequency, amount, and speed, compared with non-runners. Weekly running even <51 minutes, <6 miles, 1-2 times, <506 metabolic equivalent-minutes, or <6 mph was sufficient to reduce risk of mortality, compared with not running. In the analyses of change in running behaviors and mortality, persistent runners had the most significant benefits with 29% and 50% lower risks of all-cause and cardiovascular mortality, respectively, compared with never-runners. Conclusions Running, even 5-10 minutes per day and slow speeds <6 mph, is associated with markedly reduced risks of death from all causes and cardiovascular disease. This study may motivate healthy but sedentary individuals to begin and continue running for substantial and attainable mortality benefits. PMID:25082581

Criterion-Related Validity of the Distance- and Time-Based Walk/Run Field Tests for Estimating Cardiorespiratory Fitness: A Systematic Review and Meta-Analysis

PubMed Central

Mayorga-Vega, Daniel; Bocanegra-Parrilla, Raúl; Ornelas, Martha; Viciana, Jesús

2016-01-01

Objectives The main purpose of the present meta-analysis was to examine the criterion-related validity of the distance- and time-based walk/run tests for estimating cardiorespiratory fitness among apparently healthy children and adults. Materials and Methods Relevant studies were searched from seven electronic bibliographic databases up to August 2015 and through other sources. The Hunter-Schmidt’s psychometric meta-analysis approach was conducted to estimate the population criterion-related validity of the following walk/run tests: 5,000 m, 3 miles, 2 miles, 3,000 m, 1.5 miles, 1 mile, 1,000 m, ½ mile, 600 m, 600 yd, ¼ mile, 15 min, 12 min, 9 min, and 6 min. Results From the 123 included studies, a total of 200 correlation values were analyzed. The overall results showed that the criterion-related validity of the walk/run tests for estimating maximum oxygen uptake ranged from low to moderate (rp = 0.42–0.79), with the 1.5 mile (rp = 0.79, 0.73–0.85) and 12 min walk/run tests (rp = 0.78, 0.72–0.83) having the higher criterion-related validity for distance- and time-based field tests, respectively. The present meta-analysis also showed that sex, age and maximum oxygen uptake level do not seem to affect the criterion-related validity of the walk/run tests. Conclusions When the evaluation of an individual’s maximum oxygen uptake attained during a laboratory test is not feasible, the 1.5 mile and 12 min walk/run tests represent useful alternatives for estimating cardiorespiratory fitness. As in the assessment with any physical fitness field test, evaluators must be aware that the performance score of the walk/run field tests is simply an estimation and not a direct measure of cardiorespiratory fitness. PMID:26987118

Effect of using poles on foot-ground kinetics during stance phase in trail running.

PubMed

Daviaux, Yannick; Hintzy, Frédérique; Samozino, Pierre; Horvais, Nicolas

2013-01-01

The aim of this study was to investigate the effect of using poles on foot-ground interaction during trail running with slopes of varying incline. Ten runners ran on a loop track representative of a trail running field situation with uphill (+9°), level and downhill (-6°) sections at fixed speed (3.2 m.s(-1)). Experimental conditions included running with (WP) and without (NP) the use of poles for each of the three slopes. Several quantitative and temporal foot-ground interaction parameters were calculated from plantar pressure data measured with a portable device. Using poles induced a decrease in plantar pressure intensity even when the running velocity stayed constant. However, the localisation and the magnitude of this decrease depended on the slope situations. During WP level running, regional analysis of the foot highlighted a decrease of the force time integral (FTI) for absolute (FTIabs; -12.6%; P<0.05) and relative values (FTIrel; -14.3%; P<0.05) in the medial forefoot region. FTIabs (-14.2%; P<0.05) and duration of force application (Δt; -13.5%; P<0.05) also decreased in the medial heel region when WP downhill running. These results support a facilitating effect of pole use for propulsion during level running and for the absorption phase during downhill running.

Validity of the Polar V800 monitor for measuring heart rate variability in mountain running route conditions.

PubMed

Caminal, Pere; Sola, Fuensanta; Gomis, Pedro; Guasch, Eduard; Perera, Alexandre; Soriano, Núria; Mont, Lluis

2018-03-01

This study was conducted to test, in mountain running route conditions, the accuracy of the Polar V800™ monitor as a suitable device for monitoring the heart rate variability (HRV) of runners. Eighteen healthy subjects ran a route that included a range of running slopes such as those encountered in trail and ultra-trail races. The comparative study of a V800 and a Holter SEER 12 ECG Recorder™ included the analysis of RR time series and short-term HRV analysis. A correction algorithm was designed to obtain the corrected Polar RR intervals. Six 5-min segments related to different running slopes were considered for each subject. The correlation between corrected V800 RR intervals and Holter RR intervals was very high (r = 0.99, p < 0.001), and the bias was less than 1 ms. The limits of agreement (LoA) obtained for SDNN and RMSSD were (- 0.25 to 0.32 ms) and (- 0.90 to 1.08 ms), respectively. The effect size (ES) obtained in the time domain HRV parameters was considered small (ES < 0.2). Frequency domain HRV parameters did not differ (p > 0.05) and were well correlated (r ≥ 0.96, p < 0.001). Narrow limits of agreement, high correlations and small effect size suggest that the Polar V800 is a valid tool for the analysis of heart rate variability in athletes while running high endurance events such as marathon, trail, and ultra-trail races.

A FORTRAN program for multivariate survival analysis on the personal computer.

PubMed

Mulder, P G

1988-01-01

In this paper a FORTRAN program is presented for multivariate survival or life table regression analysis in a competing risks' situation. The relevant failure rate (for example, a particular disease or mortality rate) is modelled as a log-linear function of a vector of (possibly time-dependent) explanatory variables. The explanatory variables may also include the variable time itself, which is useful for parameterizing piecewise exponential time-to-failure distributions in a Gompertz-like or Weibull-like way as a more efficient alternative to Cox's proportional hazards model. Maximum likelihood estimates of the coefficients of the log-linear relationship are obtained from the iterative Newton-Raphson method. The program runs on a personal computer under DOS; running time is quite acceptable, even for large samples.

Gender difference and age-related changes in performance at the long-distance duathlon.

PubMed

Rüst, Christoph A; Knechtle, Beat; Knechtle, Patrizia; Pfeifer, Susanne; Rosemann, Thomas; Lepers, Romuald; Senn, Oliver

2013-02-01

The differences in gender- and the age-related changes in triathlon (i.e., swimming, cycling, and running) performances have been previously investigated, but data are missing for duathlon (i.e., running, cycling, and running). We investigated the participation and performance trends and the gender difference and the age-related decline in performance, at the "Powerman Zofingen" long-distance duathlon (10-km run, 150-km cycle, and 30-km run) from 2002 to 2011. During this period, there were 2,236 finishers (272 women and 1,964 men, respectively). Linear regression analyses for the 3 split times, and the total event time, demonstrated that running and cycling times were fairly stable during the last decade for both male and female elite duathletes. The top 10 overall gender differences in times were 16 ± 2, 17 ± 3, 15 ± 3, and 16 ± 5%, for the 10-km run, 150-km cycle, 30-km run and the overall race time, respectively. There was a significant (p < 0.001) age effect for each discipline and for the total race time. The fastest overall race times were achieved between the 25- and 39-year-olds. Female gender and increasing age were associated with increased performance times when additionally controlled for environmental temperatures and race year. There was only a marginal time period effect ranging between 1.3% (first run) and 9.8% (bike split) with 3.3% for overall race time. In accordance with previous observations in triathlons, the age-related decline in the duathlon performance was more pronounced in running than in cycling. Athletes and coaches can use these findings to plan the career in long-distance duathletes with the age of peak performance between 25 and 39 years for both women and men.

Scattering of cylindrical electric field waves from an elliptical dielectric cylindrical shell

NASA Astrophysics Data System (ADS)

Urbanik, E. A.

1982-12-01

This thesis examines the scattering of cylindrical waves by large dielectric scatterers of elliptic cross section. The solution method was the method of moments using a Galerkin approach. Sinusoidal basis and testing functions were used resulting in a higher convergence rate. The higher rate of convergence made it possible for the program to run on the Aeronautical Systems Division's CYBER computers without any special storage methods. This report includes discussion on moment methods, solution of integral equations, and the relationship between the electric field and the source region or self cell singularity. Since the program produced unacceptable run times, no results are contained herein. The importance of this work is the evaluation of the practicality of moment methods using standard techniques. The long run times for a mid-sized scatterer demonstrate the impracticality of moment methods for dielectrics using standard techniques.

DualSPHysics: A numerical tool to simulate real breakwaters

NASA Astrophysics Data System (ADS)

Zhang, Feng; Crespo, Alejandro; Altomare, Corrado; Domínguez, José; Marzeddu, Andrea; Shang, Shao-ping; Gómez-Gesteira, Moncho

2018-02-01

The open-source code DualSPHysics is used in this work to compute the wave run-up in an existing dike in the Chinese coast using realistic dimensions, bathymetry and wave conditions. The GPU computing power of the DualSPHysics allows simulating real-engineering problems that involve complex geometries with a high resolution in a reasonable computational time. The code is first validated by comparing the numerical free-surface elevation, the wave orbital velocities and the time series of the run-up with physical data in a wave flume. Those experiments include a smooth dike and an armored dike with two layers of cubic blocks. After validation, the code is applied to a real case to obtain the wave run-up under different incident wave conditions. In order to simulate the real open sea, the spurious reflections from the wavemaker are removed by using an active wave absorption technique.

Biomechanics and running economy.

PubMed

Anderson, T

1996-08-01

Running economy, which has traditionally been measured as the oxygen cost of running at a given velocity, has been accepted as the physiological criterion for 'efficient' performance and has been identified as a critical element of overall distance running performance. There is an intuitive link between running mechanics and energy cost of running, but research to date has not established a clear mechanical profile of an economic runner. It appears that through training, individuals are able to integrate and accommodate their own unique combination of dimensions and mechanical characteristics so that they arrive at a running motion which is most economical for them. Information in the literature suggests that biomechanical factors are likely to contribute to better economy in any runner. A variety of anthropometric dimensions could influence biomechanical effectiveness. These include: average or slightly smaller than average height for men and slightly greater than average height for women; high ponderal index and ectomorphic or ectomesomorphic physique; low percentage body fat; leg morphology which distributes mass closer to the hip joint; narrow pelvis and smaller than average feet. Gait patterns, kinematics and the kinetics of running may also be related to running economy. These factors include: stride length which is freely chosen over considerable running time; low vertical oscillation of body centre of mass; more acute knee angle during swing; less range of motion but greater angular velocity of plantar flexion during toe-off; arm motion of smaller amplitude; low peak ground reaction forces; faster rotation of shoulders in the transverse plane; greater angular excursion of the hips and shoulders about the polar axis in the transverse plane; and effective exploitation of stored elastic energy. Other factors which may improve running economy are: lightweight but well-cushioned shoes; more comprehensive training history; and the running surface of intermediate compliance. At the developmental level, this information might be useful in identifying athletes with favourable characteristics for economical distance running. At higher levels of competition, it is likely that 'natural selection' tends to eliminate athletes who failed to either inherit or develop characteristics which favour economy.

The Decline in American Children's Fitness Levels.

ERIC Educational Resources Information Center

Kuntzleman, Charles T.; Reiff, Guy G.

1992-01-01

Examines whether physical fitness levels in U.S. children and youth have changed over time. Research indicates that weight and skinfolds have increased over 50 years and distance run times have worsened over 10 years. The article includes information on relationships between cardiovascular fitness and coronary heart disease risks in children. (SM)

Assessment and Grading in Physical Education

ERIC Educational Resources Information Center

Mohnsen, Bonnie

2006-01-01

This article discusses the basis for assessing and grading students in physical education. Although students should dress appropriately for physical education, be physically active during class time, and improve their fitness (e.g., mile-run time), these items are typically not included in the physical education content standards. The vast…

Cafe Data

ERIC Educational Resources Information Center

DePaolo, Concetta A.; Robinson, David F.

2011-01-01

In this paper we present time series data collected from a cafe run by business students at a Midwestern public university. The data were collected over a ten-week period during the spring semester of 2010. These data can be used in introductory courses to illustrate basic concepts of time series and forecasting, including trend, seasonality, and…

Improved Algorithms Speed It Up for Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hazi, A

2005-09-20

Huge computers, huge codes, complex problems to solve. The longer it takes to run a code, the more it costs. One way to speed things up and save time and money is through hardware improvements--faster processors, different system designs, bigger computers. But another side of supercomputing can reap savings in time and speed: software improvements to make codes--particularly the mathematical algorithms that form them--run faster and more efficiently. Speed up math? Is that really possible? According to Livermore physicist Eugene Brooks, the answer is a resounding yes. ''Sure, you get great speed-ups by improving hardware,'' says Brooks, the deputy leadermore » for Computational Physics in N Division, which is part of Livermore's Physics and Advanced Technologies (PAT) Directorate. ''But the real bonus comes on the software side, where improvements in software can lead to orders of magnitude improvement in run times.'' Brooks knows whereof he speaks. Working with Laboratory physicist Abraham Szoeke and others, he has been instrumental in devising ways to shrink the running time of what has, historically, been a tough computational nut to crack: radiation transport codes based on the statistical or Monte Carlo method of calculation. And Brooks is not the only one. Others around the Laboratory, including physicists Andrew Williamson, Randolph Hood, and Jeff Grossman, have come up with innovative ways to speed up Monte Carlo calculations using pure mathematics.« less

Effect on Oxygen Cost of Transport from 8-Weeks of Progressive Training with Barefoot Running.

PubMed

Tam, N; Tucker, R; Astephen Wilson, J L; Santos-Concejero, J

2015-11-01

Popular interest in barefoot running has emerged as a result of its alleged performance and injury prevention benefits. Oxygen cost of transport (COT) improvements from barefoot running, however, remains equivocal. The aim of this study was to determine the influence of an 8-week progressive barefoot training program on COT and associated spatiotemporal variables. 15 male runners participated in this study. Variables such as oxygen uptake, biomechanical and spatiotemporal characteristics of gait, including ground contact (GC) and swing time; stride length and frequency and ankle plantar-dorsiflexion were measured pre- and post-intervention. The COT did not differ between barefoot and shod running either pre- or post-training. Improved barefoot COT (p<0.05) but not shod was found between pre- and post-training. Biomechanical differences between barefoot and shod conditions persisted over the training period. A decrease in barefoot COT was associated with a decrease in GC time (p=0.003, r=0.688) and a small increase in stride frequency (p=0.030; r=0.569). Ground contact time and stride frequency, previously associated with COT, only partly contribute (32% - Stride frequency and 47% - GC time) to a decrease in COT after barefoot training. Thus other physiological and biomechanical variables must influence the improvement in COT after a barefoot training intervention. © Georg Thieme Verlag KG Stuttgart · New York.

Earth Global Reference Atmospheric Model (GRAM99): Short Course

NASA Technical Reports Server (NTRS)

Leslie, Fred W.; Justus, C. G.

2007-01-01

Earth-GRAM is a FORTRAN software package that can run on a variety of platforms including PC's. For any time and location in the Earth's atmosphere, Earth-GRAM provides values of atmospheric quantities such as temperature, pressure, density, winds, constituents, etc.. Dispersions (perturbations) of these parameters are also provided and have realistic correlations, means, and variances - useful for Monte Carlo analysis. Earth-GRAM is driven by observations including a tropospheric database available from the National Climatic Data Center. Although Earth-GRAM can be run in a "stand-alone" mode, many users incorporate it into their trajectory codes. The source code is distributed free-of-charge to eligible recipients.

ACON: a multipurpose production controller for plasma physics codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snell, C.

1983-01-01

ACON is a BCON controller designed to run large production codes on the CTSS Cray-1 or the LTSS 7600 computers. ACON can also be operated interactively, with input from the user's terminal. The controller can run one code or a sequence of up to ten codes during the same job. Options are available to get and save Mass storage files, to perform Historian file updating operations, to compile and load source files, and to send out print and film files. Special features include ability to retry after Mass failures, backup options for saving files, startup messages for the various codes,more » and ability to reserve specified amounts of computer time after successive code runs. ACON's flexibility and power make it useful for running a number of different production codes.« less

Influences of motorcycle rider and driver characteristics and road environment on red light running behavior at signalized intersections.

PubMed

Jensupakarn, Auearree; Kanitpong, Kunnawee

2018-04-01

In Thailand, red light running is considered as one of the most dangerous behaviors at intersection. Red light running (RLR) behavior is the failure to obey the traffic control signal. However, motorcycle riders and car drivers who are running through red lights could be influenced by human factors or road environment at intersection. RLR could be advertent or inadvertent behavior influenced by many factors. Little research study has been done to evaluate the contributing factors influencing the red-light violation behavior. This study aims to determine the factors influencing the red light running behavior including human characteristics, physical condition of intersection, traffic signal operation, and traffic condition. A total of 92 intersections were observed in Chiang Mai, Nakhon Ratchasima, and Chonburi, the major provinces in each region of Thailand. In addition, the socio-economic characteristics of red light runners were obtained from self-reported questionnaire survey. The Binary Logistic Regression and the Multiple Linear Regression models were used to determine the characteristics of red light runners and the factors influencing rates of red light running respectively. The results from this study can help to understand the characteristics of red light runners and factors affecting them to run red lights. For motorcycle riders and car drivers, age, gender, occupation, driving license, helmet/seatbelt use, and the probability to be penalized when running the red light significantly affect RLR behavior. In addition, the results indicated that vehicle travelling direction, time of day, existence of turning lane, number of lanes, lane width, intersection sight distance, type of traffic signal pole, type of traffic signal operation, length of yellow time interval, approaching speed, distance from intersection warning sign to stop line, and pavement roughness significantly affect RLR rates. Copyright © 2018 Elsevier Ltd. All rights reserved.

Simulated tsunami run-up amplification factors around Penang Island for preliminary risk assessment

NASA Astrophysics Data System (ADS)

Lim, Yong Hui; Kh'ng, Xin Yi; Teh, Su Yean; Koh, Hock Lye; Tan, Wai Kiat

2017-08-01

The mega-tsunami Andaman that struck Malaysia on 26 December 2004 affected 200 kilometers of northwest Peninsular Malaysia coastline from Perlis to Selangor. It is anticipated by the tsunami scientific community that the next mega-tsunami is due to occur any time soon. This rare catastrophic event has awakened the attention of Malaysian government to take appropriate risk reduction measures, including timely and orderly evacuation. To effectively evacuate ordinary citizens to a safe ground or a nearest designated emergency shelter, a well prepared evacuation route is essential with the estimated tsunami run-up heights and inundation distances on land clearly indicated on the evacuation map. The run-up heights and inundation distances are simulated by an in-house model 2-D TUNA-RP based upon credible scientific tsunami source scenarios derived from tectonic activity around the region. To provide a useful tool for estimating the run-up heights along the entire coast of Penang Island, we computed tsunami amplification factors based upon 2-D TUNA-RP model simulations in this paper. The inundation map and run-up amplification factors in six domains along the entire coastline of Penang Island are provided. The comparison between measured tsunami wave heights for the 2004 Andaman tsunami and TUNA-RP model simulated values demonstrates good agreement.

User's guide to program FLEXSTAB. [aerodynamics

NASA Technical Reports Server (NTRS)

Cavin, R. K., III; Colunga, D.

1975-01-01

A manual is presented for correctly submitting program runs in aerodynamics on the UNIVAC 1108 computer system. All major program modules are included. Control cards are documented for the user's convenience, and card parameters are included in order to provide some idea as to reasonable time estimates for the program modules.

A Monte-Carlo maplet for the study of the optical properties of biological tissues

NASA Astrophysics Data System (ADS)

Yip, Man Ho; Carvalho, M. J.

2007-12-01

Monte-Carlo simulations are commonly used to study complex physical processes in various fields of physics. In this paper we present a Maple program intended for Monte-Carlo simulations of photon transport in biological tissues. The program has been designed so that the input data and output display can be handled by a maplet (an easy and user-friendly graphical interface), named the MonteCarloMaplet. A thorough explanation of the programming steps and how to use the maplet is given. Results obtained with the Maple program are compared with corresponding results available in the literature. Program summaryProgram title:MonteCarloMaplet Catalogue identifier:ADZU_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZU_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.:3251 No. of bytes in distributed program, including test data, etc.:296 465 Distribution format: tar.gz Programming language:Maple 10 Computer: Acer Aspire 5610 (any running Maple 10) Operating system: Windows XP professional (any running Maple 10) Classification: 3.1, 5 Nature of problem: Simulate the transport of radiation in biological tissues. Solution method: The Maple program follows the steps of the C program of L. Wang et al. [L. Wang, S.L. Jacques, L. Zheng, Computer Methods and Programs in Biomedicine 47 (1995) 131-146]; The Maple library routine for random number generation is used [Maple 10 User Manual c Maplesoft, a division of Waterloo Maple Inc., 2005]. Restrictions: Running time increases rapidly with the number of photons used in the simulation. Unusual features: A maplet (graphical user interface) has been programmed for data input and output. Note that the Monte-Carlo simulation was programmed with Maple 10. If attempting to run the simulation with an earlier version of Maple, appropriate modifications (regarding typesetting fonts) are required and once effected the worksheet runs without problem. However some of the windows of the maplet may still appear distorted. Running time: Depends essentially on the number of photons used in the simulation. Elapsed times for particular runs are reported in the main text.

Red-light running violation prediction using observational and simulator data.

PubMed

Jahangiri, Arash; Rakha, Hesham; Dingus, Thomas A

2016-11-01

In the United States, 683 people were killed and an estimated 133,000 were injured in crashes due to running red lights in 2012. To help prevent/mitigate crashes caused by running red lights, these violations need to be identified before they occur, so both the road users (i.e., drivers, pedestrians, etc.) in potential danger and the infrastructure can be notified and actions can be taken accordingly. Two different data sets were used to assess the feasibility of developing red-light running (RLR) violation prediction models: (1) observational data and (2) driver simulator data. Both data sets included common factors, such as time to intersection (TTI), distance to intersection (DTI), and velocity at the onset of the yellow indication. However, the observational data set provided additional factors that the simulator data set did not, and vice versa. The observational data included vehicle information (e.g., speed, acceleration, etc.) for several different time frames. For each vehicle approaching an intersection in the observational data set, required data were extracted from several time frames as the vehicle drew closer to the intersection. However, since the observational data were inherently anonymous, driver factors such as age and gender were unavailable in the observational data set. Conversely, the simulator data set contained age and gender. In addition, the simulator data included a secondary (non-driving) task factor and a treatment factor (i.e., incoming/outgoing calls while driving). The simulator data only included vehicle information for certain time frames (e.g., yellow onset); the data did not provide vehicle information for several different time frames while vehicles were approaching an intersection. In this study, the random forest (RF) machine-learning technique was adopted to develop RLR violation prediction models. Factor importance was obtained for different models and different data sets to show how differently the factors influence the performance of each model. A sensitivity analysis showed that the factor importance to identify RLR violations changed when data from different time frames were used to develop the prediction models. TTI, DTI, the required deceleration parameter (RDP), and velocity at the onset of a yellow indication were among the most important factors identified by both models constructed using observational data and simulator data. Furthermore, in addition to the factors obtained from a point in time (i.e., yellow onset), valuable information suitable for RLR violation prediction was obtained from defined monitoring periods. It was found that period lengths of 2-6m contributed to the best model performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Surrogate Reservoir Model

NASA Astrophysics Data System (ADS)

Mohaghegh, Shahab

2010-05-01

Surrogate Reservoir Model (SRM) is new solution for fast track, comprehensive reservoir analysis (solving both direct and inverse problems) using existing reservoir simulation models. SRM is defined as a replica of the full field reservoir simulation model that runs and provides accurate results in real-time (one simulation run takes only a fraction of a second). SRM mimics the capabilities of a full field model with high accuracy. Reservoir simulation is the industry standard for reservoir management. It is used in all phases of field development in the oil and gas industry. The routine of simulation studies calls for integration of static and dynamic measurements into the reservoir model. Full field reservoir simulation models have become the major source of information for analysis, prediction and decision making. Large prolific fields usually go through several versions (updates) of their model. Each new version usually is a major improvement over the previous version. The updated model includes the latest available information incorporated along with adjustments that usually are the result of single-well or multi-well history matching. As the number of reservoir layers (thickness of the formations) increases, the number of cells representing the model approaches several millions. As the reservoir models grow in size, so does the time that is required for each run. Schemes such as grid computing and parallel processing helps to a certain degree but do not provide the required speed for tasks such as: field development strategies using comprehensive reservoir analysis, solving the inverse problem for injection/production optimization, quantifying uncertainties associated with the geological model and real-time optimization and decision making. These types of analyses require hundreds or thousands of runs. Furthermore, with the new push for smart fields in the oil/gas industry that is a natural growth of smart completion and smart wells, the need for real time reservoir modeling becomes more pronounced. SRM is developed using the state of the art in neural computing and fuzzy pattern recognition to address the ever growing need in the oil and gas industry to perform accurate, but high speed simulation and modeling. Unlike conventional geo-statistical approaches (response surfaces, proxy models …) that require hundreds of simulation runs for development, SRM is developed only with a few (from 10 to 30 runs) simulation runs. SRM can be developed regularly (as new versions of the full field model become available) off-line and can be put online for real-time processing to guide important decisions. SRM has proven its value in the field. An SRM was developed for a giant oil field in the Middle East. The model included about one million grid blocks with more than 165 horizontal wells and took ten hours for a single run on 12 parallel CPUs. Using only 10 simulation runs, an SRM was developed that was able to accurately mimic the behavior of the reservoir simulation model. Performing a comprehensive reservoir analysis that included making millions of SRM runs, wells in the field were divided into five clusters. It was predicted that wells in cluster one & two are best candidates for rate relaxation with minimal, long term water production while wells in clusters four and five are susceptive to high water cuts. Two and a half years and 20 wells later, rate relaxation results from the field proved that all the predictions made by the SRM analysis were correct. While incremental oil production increased in all wells (wells in clusters 1 produced the most followed by wells in cluster 2, 3 …) the percent change in average monthly water cut for wells in each cluster clearly demonstrated the analytic power of SRM. As it was correctly predicted, wells in clusters 1 and 2 actually experience a reduction in water cut while a substantial increase in water cut was observed in wells classified into clusters 4 and 5. Performing these analyses would have been impossible using the original full field simulation model.

Australia's marine virtual laboratory

NASA Astrophysics Data System (ADS)

Proctor, Roger; Gillibrand, Philip; Oke, Peter; Rosebrock, Uwe

2014-05-01

In all modelling studies of realistic scenarios, a researcher has to go through a number of steps to set up a model in order to produce a model simulation of value. The steps are generally the same, independent of the modelling system chosen. These steps include determining the time and space scales and processes of the required simulation; obtaining data for the initial set up and for input during the simulation time; obtaining observation data for validation or data assimilation; implementing scripts to run the simulation(s); and running utilities or custom-built software to extract results. These steps are time consuming and resource hungry, and have to be done every time irrespective of the simulation - the more complex the processes, the more effort is required to set up the simulation. The Australian Marine Virtual Laboratory (MARVL) is a new development in modelling frameworks for researchers in Australia. MARVL uses the TRIKE framework, a java-based control system developed by CSIRO that allows a non-specialist user configure and run a model, to automate many of the modelling preparation steps needed to bring the researcher faster to the stage of simulation and analysis. The tool is seen as enhancing the efficiency of researchers and marine managers, and is being considered as an educational aid in teaching. In MARVL we are developing a web-based open source application which provides a number of model choices and provides search and recovery of relevant observations, allowing researchers to: a) efficiently configure a range of different community ocean and wave models for any region, for any historical time period, with model specifications of their choice, through a user-friendly web application, b) access data sets to force a model and nest a model into, c) discover and assemble ocean observations from the Australian Ocean Data Network (AODN, http://portal.aodn.org.au/webportal/) in a format that is suitable for model evaluation or data assimilation, and d) run the assembled configuration in a cloud computing environment, or download the assembled configuration and packaged data to run on any other system of the user's choice. MARVL is now being applied in a number of case studies around Australia ranging in scale from locally confined estuaries to the Tasman Sea between Australia and New Zealand. In time we expect the range of models offered will include biogeochemical models.

Potential Relationship between Passive Plantar Flexor Stiffness and Running Performance.

PubMed

Ueno, Hiromasa; Suga, Tadashi; Takao, Kenji; Tanaka, Takahiro; Misaki, Jun; Miyake, Yuto; Nagano, Akinori; Isaka, Tadao

2018-02-01

The present study aimed to determine the relationship between passive stiffness of the plantar flexors and running performance in endurance runners. Forty-eight well-trained male endurance runners and 24 untrained male control subjects participated in this study. Plantar flexor stiffness during passive dorsiflexion was calculated from the slope of the linear portion of the torque-angle curve. Of the endurance runners included in the present study, running economy in 28 endurance runners was evaluated by measuring energy cost during three 4-min trials (14, 16, and 18 km/h) of submaximal treadmill running. Passive stiffness of the plantar flexors was significantly higher in endurance runners than in untrained subjects. Moreover, passive plantar flexor stiffness in endurance runners was significantly correlated with a personal best 5000-m race time. Furthermore, passive plantar flexor stiffness in endurance runners was significantly correlated with energy cost during submaximal running at 16 km/h and 18 km/h, and a trend towards such significance was observed at 14 km/h. The present findings suggest that stiffer plantar flexors may help achieve better running performance, with greater running economy, in endurance runners. Therefore, in the clinical setting, passive stiffness of the plantar flexors may be a potential parameter for assessing running performance. © Georg Thieme Verlag KG Stuttgart · New York.

Injuries in women associated with a periodized strength training and running program.

PubMed

Reynolds, K L; Harman, E A; Worsham, R E; Sykes, M B; Frykman, P N; Backus, V L

2001-02-01

Forty-five women participated in a 24-week physical training program designed to improve lifting, load carriage, and running performance. Activities included weightlifting, running, backpacking, lift and carry drills, and sprint running. Physicians documented by passive surveillance all training-related injuries. Thirty-two women successfully completed training program. Twenty-two women (48.9%) suffered least 1 injury during training, but only 2 women had to drop out of the study because of injuries. The rate of injury associated with lost training time was 2.8 injuries per 1,000 training hours of exposure. Total clinic visits and days lost from training were 89 and 69, respectively. Most injuries were the overuse type involving the lower back, knees, and feet. Weightlifting accounted for a majority of the lost training days. A combined strength training and running program resulted in significant performance gains in women. Only 2 out of 45 participants left the training program cause of injuries.

Effects of resistance training on running economy and cross-country performance.

PubMed

Barnes, Kyle R; Hopkins, Will G; McGuigan, Michael R; Northuis, Mark E; Kilding, Andrew E

2013-12-01

Heavy-resistance training and plyometric training offer distinct physiological and neuromuscular adaptations that could enhance running economy and, consequently, distance-running performance. To date, no studies have examined the effect of combining the two modes of training on running economy or performance. Fifty collegiate male and female cross-country runners performed a 5-km time trial and a series of laboratory-based tests to determine aerobic, anthropometric, biomechanical, and neuromuscular characteristics. Thereafter, each athlete participated in a season of six to eight collegiate cross-country races for 13 wk. After the first 4 wk, athletes were randomly assigned to either heavy-resistance or plyometric plus heavy-resistance training. Five days after completing their final competition, runners repeated the same set of laboratory tests. We also estimated the effects of the intervention on competition performance throughout the season using athletes of other teams as controls. Heavy-resistance training produced small-moderate improvements in peak speed, running economy, and neuromuscular characteristics relative to plyometric resistance training, whereas changes in biomechanical measures favored plyometric resistance training. Men made less gains than women in most tests. Both treatments had possibly harmful effects on competition times in men (mean = 0.5%; 90% confidence interval = ±1.2%), but there may have been benefit for some individuals. Both treatments were likely beneficial for all women (-1.2%; ±1.3%), but heavy-resistance training was possibly better than plyometric resistance training. The changes in laboratory-based parameters related to distance-running performance were consistent with the changes in competition times for women but only partly for men. Our data indicate that women should include heavy-resistance training in their programs, but men should be cautious about using it in season until more research establishes whether certain men are positive or negative responders.

Monitoring and Evaluation of Smolt Migration in the Columbia Basin : Volume XV : Evaluation of the 2007 Predictions of the Run-Timing of Wild and Hatchery-Reared Salmon and Steelhead Smolts to Rock Island, Lower Granite, McNary, John Day, and Bonneville Dams using Program RealTime.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griswold, Jim; Townsend, Richard L.; Skalski, John R.

Program RealTime provided monitoring and forecasting of the 2007 inseason outmigrations via the internet for 26 PIT-tagged stocks of wild ESU Chinook salmon and steelhead to Lower Granite and/or McNary dams, one PIT-tagged hatchery-reared ESU of sockeye salmon to Lower Granite Dam, one PIT-tagged wild stock of sockeye salmon to McNary Dam, and 20 passage-indexed runs-at-large, five each to Rock Island, McNary, John Day, and Bonneville dams. Nineteen stocks are of wild yearling Chinook salmon which were captured, PIT-tagged, and released at sites above Lower Granite Dam in 2007 and have at least one year's historical migration data previous tomore » the 2007 migration. These stocks originate in 19 tributaries of the Salmon, Grande Ronde and Clearwater Rivers, all tributaries to the Snake River, and are subsequently detected through tag identification and monitored at Lower Granite Dam. Seven wild PIT-tagged runs-at-large of Snake or Upper Columbia River ESU salmon and steelhead were monitored at McNary Dam. Three wild PIT-tagged runs-at-large were monitored at Lower Granite Dam, consisting of the yearling and subyearling Chinook salmon and the steelhead runs. The hatchery-reared PIT-tagged sockeye salmon stock from Redfish Lake was monitored outmigrating through Lower Granite Dam. Passage-indexed stocks (stocks monitored by FPC passage indices) included combined wild and hatchery runs-at-large of subyearling and yearling Chinook, coho, and sockeye salmon, and steelhead forecasted to Rock Island, McNary, John Day, and Bonneville dams.« less

Monitoring and Evaluation of Smolt Migration in the Columbia Basin, Volume XIV; Evaluation of 2006 Prediction of the Run-Timing of Wild and Hatchery-Reared Salmon and Steelhead at Rock Island, Lower Granite, McNary, John Day and Bonneville Dams using Program Real Time, Technical Report 2006.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griswold, Jim

Program RealTime provided monitoring and forecasting of the 2006 inseason outmigrations via the internet for 32 PIT-tagged stocks of wild ESU chinook salmon and steelhead to Lower Granite and/or McNary dams, one PIT-tagged hatchery-reared ESU of sockeye salmon to Lower Granite Dam, and 20 passage-indexed runs-at-large, five each to Rock Island, McNary, John Day, and Bonneville Dams. Twenty-four stocks are of wild yearling chinook salmon which were captured, PIT-tagged, and released at sites above Lower Granite Dam in 2006, and have at least one year's historical migration data previous to the 2006 migration. These stocks originate in drainages of themore » Salmon, Grande Ronde and Clearwater Rivers, all tributaries to the Snake River, and are subsequently detected through the tag identification and monitored at Lower Granite Dam. In addition, seven wild PIT-tagged runs-at-large of Snake or Upper Columbia River ESU salmon and steelhead were monitored at McNary Dam. Three wild PIT-tagged runs-at-large were monitored at Lower Granite Dam, consisting of the yearling and subyearling chinook salmon and the steelhead trout runs. The hatchery-reared PIT-tagged sockeye salmon stock from Redfish Lake was monitored outmigrating through Lower Granite Dam. Passage-indexed stocks (stocks monitored by FPC passage indices) included combined wild and hatchery runs-at-large of subyearling and yearling chinook, coho, and sockeye salmon, and steelhead trout forecasted to Rock Island, McNary, John Day, and Bonneville Dams.« less

Listing triangles in expected linear time on a class of power law graphs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordman, Daniel J.; Wilson, Alyson G.; Phillips, Cynthia Ann

Enumerating triangles (3-cycles) in graphs is a kernel operation for social network analysis. For example, many community detection methods depend upon finding common neighbors of two related entities. We consider Cohen's simple and elegant solution for listing triangles: give each node a 'bucket.' Place each edge into the bucket of its endpoint of lowest degree, breaking ties consistently. Each node then checks each pair of edges in its bucket, testing for the adjacency that would complete that triangle. Cohen presents an informal argument that his algorithm should run well on real graphs. We formalize this argument by providing an analysismore » for the expected running time on a class of random graphs, including power law graphs. We consider a rigorously defined method for generating a random simple graph, the erased configuration model (ECM). In the ECM each node draws a degree independently from a marginal degree distribution, endpoints pair randomly, and we erase self loops and multiedges. If the marginal degree distribution has a finite second moment, it follows immediately that Cohen's algorithm runs in expected linear time. Furthermore, it can still run in expected linear time even when the degree distribution has such a heavy tail that the second moment is not finite. We prove that Cohen's algorithm runs in expected linear time when the marginal degree distribution has finite 4/3 moment and no vertex has degree larger than {radical}n. In fact we give the precise asymptotic value of the expected number of edge pairs per bucket. A finite 4/3 moment is required; if it is unbounded, then so is the number of pairs. The marginal degree distribution of a power law graph has bounded 4/3 moment when its exponent {alpha} is more than 7/3. Thus for this class of power law graphs, with degree at most {radical}n, Cohen's algorithm runs in expected linear time. This is precisely the value of {alpha} for which the clustering coefficient tends to zero asymptotically, and it is in the range that is relevant for the degree distribution of the World-Wide Web.« less

Brine stability study

DOE Data Explorer

Gary Garland

2015-04-15

This is a study of the brine formulations that we were using in our testing were stable over time. The data includes charts, as well as, all of the original data from the ICP-MS runs to complete this study.

Gas Chromatograph Method Optimization Trade Study for RESOLVE: 20-meter Column v. 8-meter Column

NASA Technical Reports Server (NTRS)

Huz, Kateryna

2014-01-01

RESOLVE is the payload on a Class D mission, Resource Prospector, which will prospect for water and other volatile resources at a lunar pole. The RESOLVE payload's primary scientific purpose includes determining the presence of water on the moon in the lunar regolith. In order to detect the water, a gas chromatograph (GC) will be used in conjunction with a mass spectrometer (MS). The goal of the experiment was to compare two GC column lengths and recommend which would be best for RESOLVE's purposes. Throughout the experiment, an Inficon Fusion GC and an Inficon Micro GC 3000 were used. The Fusion had a 20m long column with 0.25mm internal diameter (Id). The Micro GC 3000 had an 8m long column with a 0.32mm Id. By varying the column temperature and column pressure while holding all other parameters constant, the ideal conditions for testing with each column length in their individual instrument configurations were determined. The criteria used for determining the optimal method parameters included (in no particular order) (1) quickest run time, (2) peak sharpness, and (3) peak separation. After testing numerous combinations of temperature and pressure, the parameters for each column length that resulted in the most optimal data given my three criteria were selected. The ideal temperature and pressure for the 20m column were 95 C and 50psig. At this temperature and pressure, the peaks were separated and the retention times were shorter compared to other combinations. The Inficon Micro GC 3000 operated better at lower temperature mainly due to the shorter 8m column. The optimal column temperature and pressure were 70 C and 30psig. The Inficon Micro GC 3000 8m column had worse separation than the Inficon Fusion 20m column, but was able to separate water within a shorter run time. Therefore, the most significant tradeoff between the two column lengths was peak separation of the sample versus run time. After performing several tests, it was concluded that better detection via good peak separation with a longer run time is a better asset than moderate peak separation with a shorter run time. Even given that RESOLVE is highly interested in water and that mission timeline is of significant importance given the short seven-to-ten-day mission timeline, worse detection with an 8m column may lead to overlooking other substances existing on the moon that could advance planetary science. Thus, I recommend the 20m column. However, if mission timeline and water separation are deemed the highest priority, the 8m column should be selected due to its ability to separate water within a shorter run time than the 20m column.

Interactions between hyporheic flow produced by stream meanders, bars, and dunes

USGS Publications Warehouse

Stonedahl, Susa H.; Harvey, Judson W.; Packman, Aaron I.

2013-01-01

Stream channel morphology from grain-scale roughness to large meanders drives hyporheic exchange flow. In practice, it is difficult to model hyporheic flow over the wide spectrum of topographic features typically found in rivers. As a result, many studies only characterize isolated exchange processes at a single spatial scale. In this work, we simulated hyporheic flows induced by a range of geomorphic features including meanders, bars and dunes in sand bed streams. Twenty cases were examined with 5 degrees of river meandering. Each meandering river model was run initially without any small topographic features. Models were run again after superimposing only bars and then only dunes, and then run a final time after including all scales of topographic features. This allowed us to investigate the relative importance and interactions between flows induced by different scales of topography. We found that dunes typically contributed more to hyporheic exchange than bars and meanders. Furthermore, our simulations show that the volume of water exchanged and the distributions of hyporheic residence times resulting from various scales of topographic features are close to, but not linearly additive. These findings can potentially be used to develop scaling laws for hyporheic flow that can be widely applied in streams and rivers.

Recent Performance Results of VPIC on Trinity

NASA Astrophysics Data System (ADS)

Nystrom, W. D.; Bergen, B.; Bird, R. F.; Bowers, K. J.; Daughton, W. S.; Guo, F.; Le, A.; Li, H.; Nam, H.; Pang, X.; Stark, D. J.; Rust, W. N., III; Yin, L.; Albright, B. J.

2017-10-01

Trinity is a new DOE compute resource now in production at Los Alamos National Laboratory. Trinity has several new and unique features including two compute partitions, one with dual socket Intel Haswell Xeon compute nodes and one with Intel Knights Landing (KNL) Xeon Phi compute nodes, use of on package high bandwidth memory (HBM) for KNL nodes, ability to configure KNL nodes with respect to HBM model and on die network topology in a variety of operational modes at run time, and use of solid state storage via burst buffer technology to reduce time required to perform I/O. An effort is in progress to optimize VPIC on Trinity by taking advantage of these new architectural features. Results of work will be presented on performance of VPIC on Haswell and KNL partitions for single node runs and runs at scale. Results include use of burst buffers at scale to optimize I/O, comparison of strategies for using MPI and threads, performance benefits using HBM and effectiveness of using intrinsics for vectorization. Work performed under auspices of U.S. Dept. of Energy by Los Alamos National Security, LLC Los Alamos National Laboratory under contract DE-AC52-06NA25396 and supported by LANL LDRD program.

Real Time Linux - The RTOS for Astronomy?

NASA Astrophysics Data System (ADS)

Daly, P. N.

The BoF was attended by about 30 participants and a free CD of real time Linux-based upon RedHat 5.2-was available. There was a detailed presentation on the nature of real time Linux and the variants for hard real time: New Mexico Tech's RTL and DIAPM's RTAI. Comparison tables between standard Linux and real time Linux responses to time interval generation and interrupt response latency were presented (see elsewhere in these proceedings). The present recommendations are to use RTL for UP machines running the 2.0.x kernels and RTAI for SMP machines running the 2.2.x kernel. Support, both academically and commercially, is available. Some known limitations were presented and the solutions reported e.g., debugging and hardware support. The features of RTAI (scheduler, fifos, shared memory, semaphores, message queues and RPCs) were described. Typical performance statistics were presented: Pentium-based oneshot tasks running > 30kHz, 486-based oneshot tasks running at ~ 10 kHz, periodic timer tasks running in excess of 90 kHz with average zero jitter peaking to ~ 13 mus (UP) and ~ 30 mus (SMP). Some detail on kernel module programming, including coding examples, were presented showing a typical data acquisition system generating simulated (random) data writing to a shared memory buffer and a fifo buffer to communicate between real time Linux and user space. All coding examples were complete and tested under RTAI v0.6 and the 2.2.12 kernel. Finally, arguments were raised in support of real time Linux: it's open source, free under GPL, enables rapid prototyping, has good support and the ability to have a fully functioning workstation capable of co-existing hard real time performance. The counter weight-the negatives-of lack of platforms (x86 and PowerPC only at present), lack of board support, promiscuous root access and the danger of ignorance of real time programming issues were also discussed. See ftp://orion.tuc.noao.edu/pub/pnd/rtlbof.tgz for the StarOffice overheads for this presentation.

Fast Gradient Elution Reversed-Phase HPLC with Diode-Array Detection as a High Throughput Screening Method for Drugs of Abuse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter W. Carr; K.M. Fuller; D.R. Stoll

A new approach has been developed by modifying a conventional gradient elution liquid chromatograph for the high throughput screening of biological samples to detect the presence of regulated intoxicants. The goal of this work was to improve the speed of a gradient elution screening method over current approaches by optimizing the operational parameters of both the column and the instrument without compromising the reproducibility of the retention times, which are the basis for the identification. Most importantly, the novel instrument configuration substantially reduces the time needed to re-equilibrate the column between gradient runs, thereby reducing the total time for eachmore » analysis. The total analysis time for each gradient elution run is only 2.8 minutes, including 0.3 minutes for column reequilibration between analyses. Retention times standard calibration solutes are reproducible to better than 0.002 minutes in consecutive runs. A corrected retention index was adopted to account for day-to-day and column-to-column variations in retention time. The discriminating power and mean list length were calculated for a library of 47 intoxicants and compared with previous work from other laboratories to evaluate fast gradient elution HPLC as a screening tool.« less

Run-time implementation issues for real-time embedded Ada

NASA Technical Reports Server (NTRS)

Maule, Ruth A.

1986-01-01

A motivating factor in the development of Ada as the department of defense standard language was the high cost of embedded system software development. It was with embedded system requirements in mind that many of the features of the language were incorporated. Yet it is the designers of embedded systems that seem to comprise the majority of the Ada community dissatisfied with the language. There are a variety of reasons for this dissatisfaction, but many seem to be related in some way to the Ada run-time support system. Some of the areas in which the inconsistencies were found to have the greatest impact on performance from the standpoint of real-time systems are presented. In particular, a large part of the duties of the tasking supervisor are subject to the design decisions of the implementer. These include scheduling, rendezvous, delay processing, and task activation and termination. Some of the more general issues presented include time and space efficiencies, generic expansions, memory management, pragmas, and tracing features. As validated compilers become available for bare computer targets, it is important for a designer to be aware that, at least for many real-time issues, all validated Ada compilers are not created equal.

Dedicated heterogeneous node scheduling including backfill scheduling

DOEpatents

Wood, Robert R [Livermore, CA; Eckert, Philip D [Livermore, CA; Hommes, Gregg [Pleasanton, CA

2006-07-25

A method and system for job backfill scheduling dedicated heterogeneous nodes in a multi-node computing environment. Heterogeneous nodes are grouped into homogeneous node sub-pools. For each sub-pool, a free node schedule (FNS) is created so that the number of to chart the free nodes over time. For each prioritized job, using the FNS of sub-pools having nodes useable by a particular job, to determine the earliest time range (ETR) capable of running the job. Once determined for a particular job, scheduling the job to run in that ETR. If the ETR determined for a lower priority job (LPJ) has a start time earlier than a higher priority job (HPJ), then the LPJ is scheduled in that ETR if it would not disturb the anticipated start times of any HPJ previously scheduled for a future time. Thus, efficient utilization and throughput of such computing environments may be increased by utilizing resources otherwise remaining idle.

Shoe cleat position during cycling and its effect on subsequent running performance in triathletes.

PubMed

Viker, Tomas; Richardson, Matt X

2013-01-01

Research with cyclists suggests a decreased load on the lower limbs by placing the shoe cleat more posteriorly, which may benefit subsequent running in a triathlon. This study investigated the effect of shoe cleat position during cycling on subsequent running. Following bike-run training sessions with both aft and traditional cleat positions, 13 well-trained triathletes completed a 30 min simulated draft-legal triathlon cycling leg, followed by a maximal 5 km run on two occasions, once with aft-placed and once with traditionally placed cleats. Oxygen consumption, breath frequency, heart rate, cadence and power output were measured during cycling, while heart rate, contact time, 200 m lap time and total time were measured during running. Cardiovascular measures did not differ between aft and traditional cleat placement during the cycling protocol. The 5 km run time was similar for aft and traditional cleat placement, at 1084 ± 80 s and 1072 ± 64 s, respectively, as was contact time during km 1 and 5, and heart rate and running speed for km 5 for the two cleat positions. Running speed during km 1 was 2.1% ± 1.8 faster (P < 0.05) for the traditional cleat placement. There are no beneficial effects of an aft cleat position on subsequent running in a short distance triathlon.

Running stride peak forces inversely determine running economy in elite runners.

PubMed

Støren, Øyvind; Helgerud, Jan; Hoff, Jan

2011-01-01

The present study investigated the relationship between running economy (RE) at 15 km/h(-1) , 3.000-m race time, maximal strength, and a number of physiological, anthropometrical, and mechanical variables. The variables measured included RE, maximal oxygen consumption, heart rate, step length and frequency, contact time, and the peak horizontal and vertical forces of each step. Maximal strength was measured as the 1 repetition maximum (1RM) half-squat using a leg press machine. Eleven male elite endurance athletes with a V(O2)max of 75.8 ± 6.2 mL/kg(-1)/min(-1) participated in this study. After the anthropometric data were collected, they were tested for RE, running characteristics, and force measures on a level treadmill at 15 km/h(-1). The athletes wore contact soles, and the treadmill was placed on a force platform. Maximal oxygen consumption and 1RM were tested after the RE measurements. The sum of horizontal and vertical peak forces revealed a significant inverse correlation (p < 0.05) both with 3,000-m performance (R = 0.71) and RE (R = 0.66). Inverse correlations were also found (p < 0.05) between RE and body height (R = 0.61) and between RE and body fat percentage (R = 0.62). In conclusion, the sum of horizontal and vertical peak forces was found to be negatively correlated to running economy and 3,000-m running performance, indicating that avoiding vertical movements and high horizontal braking force is crucial for a positive development of RE.

Heavy tailed bacterial motor switching statistics define macroscopic transport properties during upstream contamination by E. coli

NASA Astrophysics Data System (ADS)

Figueroa-Morales, N.; Rivera, A.; Altshuler, E.; Darnige, T.; Douarche, C.; Soto, R.; Lindner, A.; Clément, E.

The motility of E. Coli bacteria is described as a run and tumble process. Changes of direction correspond to a switch in the flagellar motor rotation. The run time distribution is described as an exponential decay of characteristic time close to 1s. Remarkably, it has been demonstrated that the generic response for the distribution of run times is not exponential, but a heavy tailed power law decay, which is at odds with the motility findings. We investigate the consequences of the motor statistics in the macroscopic bacterial transport. During upstream contamination processes in very confined channels, we have identified very long contamination tongues. Using a stochastic model considering bacterial dwelling times on the surfaces related to the run times, we are able to reproduce qualitatively and quantitatively the evolution of the contamination profiles when considering the power law run time distribution. However, the model fails to reproduce the qualitative dynamics when the classical exponential run and tumble distribution is considered. Moreover, we have corroborated the existence of a power law run time distribution by means of 3D Lagrangian tracking. We then argue that the macroscopic transport of bacteria is essentially determined by the motor rotation statistics.

Preventing Run-Time Bugs at Compile-Time Using Advanced C++

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neswold, Richard

When writing software, we develop algorithms that tell the computer what to do at run-time. Our solutions are easier to understand and debug when they are properly modeled using class hierarchies, enumerations, and a well-factored API. Unfortunately, even with these design tools, we end up having to debug our programs at run-time. Worse still, debugging an embedded system changes its dynamics, making it tough to find and fix concurrency issues. This paper describes techniques using C++ to detect run-time bugs *at compile time*. A concurrency library, developed at Fermilab, is used for examples in illustrating these techniques.

16 CFR 1025.15 - Time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... time prescribed or allowed by these rules, the day of the act, event, or default from which the... be included, unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs... mail, three (3) days shall be added to the prescribed period. (c) Extensions. For good cause shown, the...

16 CFR 1025.15 - Time.

Code of Federal Regulations, 2014 CFR

2014-01-01

... time prescribed or allowed by these rules, the day of the act, event, or default from which the... be included, unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs... mail, three (3) days shall be added to the prescribed period. (c) Extensions. For good cause shown, the...

16 CFR 1025.15 - Time.

Code of Federal Regulations, 2011 CFR

2011-01-01

... time prescribed or allowed by these rules, the day of the act, event, or default from which the... be included, unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs... mail, three (3) days shall be added to the prescribed period. (c) Extensions. For good cause shown, the...

16 CFR § 1025.15 - Time.

Code of Federal Regulations, 2013 CFR

2013-01-01

... period of time prescribed or allowed by these rules, the day of the act, event, or default from which the... be included, unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs... mail, three (3) days shall be added to the prescribed period. (c) Extensions. For good cause shown, the...

16 CFR 1025.15 - Time.

Code of Federal Regulations, 2012 CFR

2012-01-01

... time prescribed or allowed by these rules, the day of the act, event, or default from which the... be included, unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs... mail, three (3) days shall be added to the prescribed period. (c) Extensions. For good cause shown, the...

Optimal chemotaxis in intermittent migration of animal cells

NASA Astrophysics Data System (ADS)

Romanczuk, P.; Salbreux, G.

2015-04-01

Animal cells can sense chemical gradients without moving and are faced with the challenge of migrating towards a target despite noisy information on the target position. Here we discuss optimal search strategies for a chaser that moves by switching between two phases of motion ("run" and "tumble"), reorienting itself towards the target during tumble phases, and performing persistent migration during run phases. We show that the chaser average run time can be adjusted to minimize the target catching time or the spatial dispersion of the chasers. We obtain analytical results for the catching time and for the spatial dispersion in the limits of small and large ratios of run time to tumble time and scaling laws for the optimal run times. Our findings have implications for optimal chemotactic strategies in animal cell migration.

Adaptive sampling dual terahertz comb spectroscopy using dual free-running femtosecond lasers.

PubMed

Yasui, Takeshi; Ichikawa, Ryuji; Hsieh, Yi-Da; Hayashi, Kenta; Cahyadi, Harsono; Hindle, Francis; Sakaguchi, Yoshiyuki; Iwata, Tetsuo; Mizutani, Yasuhiro; Yamamoto, Hirotsugu; Minoshima, Kaoru; Inaba, Hajime

2015-06-02

Terahertz (THz) dual comb spectroscopy (DCS) is a promising method for high-accuracy, high-resolution, broadband THz spectroscopy because the mode-resolved THz comb spectrum includes both broadband THz radiation and narrow-line CW-THz radiation characteristics. In addition, all frequency modes of a THz comb can be phase-locked to a microwave frequency standard, providing excellent traceability. However, the need for stabilization of dual femtosecond lasers has often hindered its wide use. To overcome this limitation, here we have demonstrated adaptive-sampling THz-DCS, allowing the use of free-running femtosecond lasers. To correct the fluctuation of the time and frequency scales caused by the laser timing jitter, an adaptive sampling clock is generated by dual THz-comb-referenced spectrum analysers and is used for a timing clock signal in a data acquisition board. The results not only indicated the successful implementation of THz-DCS with free-running lasers but also showed that this configuration outperforms standard THz-DCS with stabilized lasers due to the slight jitter remained in the stabilized lasers.

Adaptive sampling dual terahertz comb spectroscopy using dual free-running femtosecond lasers

PubMed Central

Yasui, Takeshi; Ichikawa, Ryuji; Hsieh, Yi-Da; Hayashi, Kenta; Cahyadi, Harsono; Hindle, Francis; Sakaguchi, Yoshiyuki; Iwata, Tetsuo; Mizutani, Yasuhiro; Yamamoto, Hirotsugu; Minoshima, Kaoru; Inaba, Hajime

2015-01-01

Terahertz (THz) dual comb spectroscopy (DCS) is a promising method for high-accuracy, high-resolution, broadband THz spectroscopy because the mode-resolved THz comb spectrum includes both broadband THz radiation and narrow-line CW-THz radiation characteristics. In addition, all frequency modes of a THz comb can be phase-locked to a microwave frequency standard, providing excellent traceability. However, the need for stabilization of dual femtosecond lasers has often hindered its wide use. To overcome this limitation, here we have demonstrated adaptive-sampling THz-DCS, allowing the use of free-running femtosecond lasers. To correct the fluctuation of the time and frequency scales caused by the laser timing jitter, an adaptive sampling clock is generated by dual THz-comb-referenced spectrum analysers and is used for a timing clock signal in a data acquisition board. The results not only indicated the successful implementation of THz-DCS with free-running lasers but also showed that this configuration outperforms standard THz-DCS with stabilized lasers due to the slight jitter remained in the stabilized lasers. PMID:26035687

Running Injuries in the Participants of Ljubljana Marathon.

PubMed

Vitez, Luka; Zupet, Petra; Zadnik, Vesna; Drobnič, Matej

2017-10-01

The aim of our study was to determine the self-reported incidence and prevalence of running-related injuries among participants of the 18 th Ljubljana Marathon, and to identify risk factors for their occurrence. A customized questionnaire was distributed over registration. Independent samples of t-test and chi-square test were used to calculate the differences in risk factors occurrence in the injured and non-injured group. Factors which appeared significantly more frequently in the injured group were included further into multiple logistic regression analysis. The reported lifetime running injury (absence >2 weeks) incidence was: 46% none, 47% rarely, 4% occasionally, and 2% often. Most commonly injured body regions were: knee (30%), ankle and Achilles' tendon (24%), foot (15%), and calf (12%). Male gender, running history of 1-3 years, and history of previous injuries were risk factors for life-time running injury. In the season preceding the event, 65% of participants had not experienced any running injuries, 19% of them reported minor problems (max 2 weeks absenteeism), but 10% and 7% suffered from moderate (absence 3-4 weeks) or major (more than 4 weeks pause) injuries. BMI was identified as the solely risk factor. This self-reported study revealed a 53% lifetime prevalence of running-related injuries, with the predominate involvement of knee, ankle and Achilles' tendon. One out of three recreational runners experienced at least one minor running injury per season. It seems that male gender, short running experience, previous injury, and BMI do increase the probability for running-related injuries.

Assays for therapeutic drug monitoring of β-lactam antibiotics: A structured review.

PubMed

Carlier, Mieke; Stove, Veronique; Wallis, Steven C; De Waele, Jan J; Verstraete, Alain G; Lipman, Jeffrey; Roberts, Jason A

2015-10-01

In some patient groups, including critically ill patients, the pharmacokinetics of β-lactam antibiotics may be profoundly disturbed due to pathophysiological changes in distribution and elimination. Therapeutic drug monitoring (TDM) is a strategy that may help to optimise dosing. The aim of this review was to identify and analyse the published literature on the methods used for β-lactam quantification in TDM programmes. Sixteen reports described methods for the simultaneous determination of three or more β-lactam antibiotics in plasma/serum. Measurement of these antibiotics, due to low frequency of usage relative to some other tests, is generally limited to in-house chromatographic methods coupled to ultraviolet or mass spectrometric detection. Although many published methods state they are fit for TDM, they are inconvenient because of intensive sample preparation and/or long run times. Ideally, methods used for routine TDM should have a short turnaround time (fast run-time and fast sample preparation), a low limit of quantification and a sufficiently high upper limit of quantification. The published assays included a median of 6 analytes [interquartile range (IQR) 4-10], with meropenem and piperacillin being the most frequently measured β-lactam antibiotics. The median run time was 8 min (IQR 5.9-21.3 min). There is also a growing number of methods measuring free concentrations. An assay that measures antibiotics without any sample preparation would be the next step towards real-time monitoring; no such method is currently available. Copyright © 2015 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

First International Conference on Ada (R) Programming Language Applications for the NASA Space Station, volume 1

NASA Technical Reports Server (NTRS)

Bown, Rodney L. (Editor)

1986-01-01

Topics discussed include: test and verification; environment issues; distributed Ada issues; life cycle issues; Ada in Europe; management/training issues; common Ada interface set; and run time issues.

Modeling a maintenance simulation of the geosynchronous platform

NASA Technical Reports Server (NTRS)

Kleiner, A. F., Jr.

1980-01-01

A modeling technique used to conduct a simulation study comparing various maintenance routines for a space platform is dicussed. A system model is described and illustrated, the basic concepts of a simulation pass are detailed, and sections on failures and maintenance are included. The operation of the system across time is best modeled by a discrete event approach with two basic events - failure and maintenance of the system. Each overall simulation run consists of introducing a particular model of the physical system, together with a maintenance policy, demand function, and mission lifetime. The system is then run through many passes, each pass corresponding to one mission and the model is re-initialized before each pass. Statistics are compiled at the end of each pass and after the last pass a report is printed. Items of interest typically include the time to first maintenance, total number of maintenance trips for each pass, average capability of the system, etc.

Plantar pressure measurements and running-related injury: A systematic review of methods and possible associations.

PubMed

Mann, Robert; Malisoux, Laurent; Urhausen, Axel; Meijer, Kenneth; Theisen, Daniel

2016-06-01

Pressure-sensitive measuring devices have been identified as appropriate tools for measuring an array of parameters during running. It is unclear which biomechanical characteristics relate to running-related injury (RRI) and which data-processing techniques are most promising to detect this relationship. This systematic review aims to identify pertinent methodologies and characteristics measured using plantar pressure devices, and to summarise their associations with RRI. PubMed, Embase, CINAHL, ScienceDirect and Scopus were searched up until March 2015. Retrospective and prospective, biomechanical studies on running using any kind of pressure-sensitive device with RRI as an outcome were included. All studies involving regular or recreational runners were considered. The study quality was assessed and the measured parameters were summarised. One low quality, two moderate quality and five high quality studies were included. Five different subdivisions of plantar area were identified, as well as five instants and four phases of measurement during foot-ground contact. Overall many parameters were collated and subdivided as plantar pressure and force, plantar pressure and force location, contact area, timing and stride parameters. Differences between the injured and control group were found for mediolateral and anteroposterior displacement of force, contact area, velocity of force displacement, relative force-time integral, mediolateral force ratio, time to peak force and inter-stride correlative patterns. However, no consistent results were found between studies and no biomechanical risk patterns were apparent. Additionally, conflicting findings were reported for peak force in three studies. Based on these observations, we provide suggestions for improved methodology measurement of pertinent parameters for future studies. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

New operator assistance features in the CMS Run Control System

NASA Astrophysics Data System (ADS)

Andre, J.-M.; Behrens, U.; Branson, J.; Brummer, P.; Chaze, O.; Cittolin, S.; Contescu, C.; Craigs, B. G.; Darlea, G.-L.; Deldicque, C.; Demiragli, Z.; Dobson, M.; Doualot, N.; Erhan, S.; Fulcher, J. R.; Gigi, D.; Gładki, M.; Glege, F.; Gomez-Ceballos, G.; Hegeman, J.; Holzner, A.; Janulis, M.; Jimenez-Estupiñán, R.; Masetti, L.; Meijers, F.; Meschi, E.; Mommsen, R. K.; Morovic, S.; O'Dell, V.; Orsini, L.; Paus, C.; Petrova, P.; Pieri, M.; Racz, A.; Reis, T.; Sakulin, H.; Schwick, C.; Simelevicius, D.; Vougioukas, M.; Zejdl, P.

2017-10-01

During Run-1 of the LHC, many operational procedures have been automated in the run control system of the Compact Muon Solenoid (CMS) experiment. When detector high voltages are ramped up or down or upon certain beam mode changes of the LHC, the DAQ system is automatically partially reconfigured with new parameters. Certain types of errors such as errors caused by single-event upsets may trigger an automatic recovery procedure. Furthermore, the top-level control node continuously performs cross-checks to detect sub-system actions becoming necessary because of changes in configuration keys, changes in the set of included front-end drivers or because of potential clock instabilities. The operator is guided to perform the necessary actions through graphical indicators displayed next to the relevant command buttons in the user interface. Through these indicators, consistent configuration of CMS is ensured. However, manually following the indicators can still be inefficient at times. A new assistant to the operator has therefore been developed that can automatically perform all the necessary actions in a streamlined order. If additional problems arise, the new assistant tries to automatically recover from these. With the new assistant, a run can be started from any state of the sub-systems with a single click. An ongoing run may be recovered with a single click, once the appropriate recovery action has been selected. We review the automation features of CMS Run Control and discuss the new assistant in detail including first operational experience.

New Operator Assistance Features in the CMS Run Control System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andre, J.M.; et al.

During Run-1 of the LHC, many operational procedures have been automated in the run control system of the Compact Muon Solenoid (CMS) experiment. When detector high voltages are ramped up or down or upon certain beam mode changes of the LHC, the DAQ system is automatically partially reconfigured with new parameters. Certain types of errors such as errors caused by single-event upsets may trigger an automatic recovery procedure. Furthermore, the top-level control node continuously performs cross-checks to detect sub-system actions becoming necessary because of changes in configuration keys, changes in the set of included front-end drivers or because of potentialmore » clock instabilities. The operator is guided to perform the necessary actions through graphical indicators displayed next to the relevant command buttons in the user interface. Through these indicators, consistent configuration of CMS is ensured. However, manually following the indicators can still be inefficient at times. A new assistant to the operator has therefore been developed that can automatically perform all the necessary actions in a streamlined order. If additional problems arise, the new assistant tries to automatically recover from these. With the new assistant, a run can be started from any state of the sub-systems with a single click. An ongoing run may be recovered with a single click, once the appropriate recovery action has been selected. We review the automation features of CMS Run Control and discuss the new assistant in detail including first operational experience.« less

Maximal oxygen uptake, anaerobic threshold and running economy in women and men with similar performances level in marathons.

PubMed

Helgerud, J

1994-01-01

Sex differences in running economy (gross oxygen cost of running, CR), maximal oxygen uptake (VO2max), anaerobic threshold (Th(an)), percentage utilization of aerobic power (% VO2max), and Th(an) during running were investigated. There were six men and six women aged 20-30 years with a performance time of 2 h 40 min over the marathon distance. The VO2max, Th(an), and CR were measured during controlled running on a treadmill at 1 degree and 3 degrees gradient. From each subject's recorded time of running in the marathon, the average speed (vM) was calculated and maintained during the treadmill running for 11 min. The VO2max was inversely related to body mass (mb), there were no sex differences, and the mean values of the reduced exponent were 0.65 for women and 0.81 for men. These results indicate that for running the unit ml.kg-0.75.min-1 is convenient when comparing individuals with different mb. The VO2max was about 10% (23 ml.kg-0.75.min-1) higher in the men than in the women. The women had on the average 10-12 ml.kg-0.75.min-1 lower VO2 than the men when running at comparable velocities. Disregarding sex, the mean value of CR was 0.211 (SEM 0.005) ml.kg-1.m-1 (resting included), and was independent of treadmill speed. No sex differences in Th(an) expressed as % VO2max or percentage maximal heart rate were found, but Th(an) expressed as VO2 in ml.kg-0.75.min-1 was significantly higher in the men compared to the women. The percentage utilization of fcmax and concentration of blood lactate at vM was higher for the female runners.(ABSTRACT TRUNCATED AT 250 WORDS)

Non-exchangeability of running vs. other exercise in their association with adiposity, and its implications for public health recommendations.

PubMed

Williams, Paul T

2012-01-01

Current physical activity recommendations assume that different activities can be exchanged to produce the same weight-control benefits so long as total energy expended remains the same (exchangeability premise). To this end, they recommend calculating energy expenditure as the product of the time spent performing each activity and the activity's metabolic equivalents (MET), which may be summed to achieve target levels. The validity of the exchangeability premise was assessed using data from the National Runners' Health Study. Physical activity dose was compared to body mass index (BMI) and body circumferences in 33,374 runners who reported usual distance run and pace, and usual times spent running and other exercises per week. MET hours per day (METhr/d) from running was computed from: a) time and intensity, and b) reported distance run (1.02 MET • hours per km). When computed from time and intensity, the declines (slope±SE) per METhr/d were significantly greater (P<10(-15)) for running than non-running exercise for BMI (slopes±SE, male: -0.12 ± 0.00 vs. 0.00±0.00; female: -0.12 ± 0.00 vs. -0.01 ± 0.01 kg/m(2) per METhr/d) and waist circumference (male: -0.28 ± 0.01 vs. -0.07±0.01; female: -0. 31±0.01 vs. -0.05 ± 0.01 cm per METhr/d). Reported METhr/d of running was 38% to 43% greater when calculated from time and intensity than distance. Moreover, the declines per METhr/d run were significantly greater when estimated from reported distance for BMI (males: -0.29 ± 0.01; females: -0.27 ± 0.01 kg/m(2) per METhr/d) and waist circumference (males: -0.67 ± 0.02; females: -0.69 ± 0.02 cm per METhr/d) than when computed from time and intensity (cited above). The exchangeability premise was not supported for running vs. non-running exercise. Moreover, distance-based running prescriptions may provide better weight control than time-based prescriptions for running or other activities. Additional longitudinal studies and randomized clinical trials are required to verify these results prospectively.

Robust and fast nonlinear optimization of diffusion MRI microstructure models.

PubMed

Harms, R L; Fritz, F J; Tobisch, A; Goebel, R; Roebroeck, A

2017-07-15

Advances in biophysical multi-compartment modeling for diffusion MRI (dMRI) have gained popularity because of greater specificity than DTI in relating the dMRI signal to underlying cellular microstructure. A large range of these diffusion microstructure models have been developed and each of the popular models comes with its own, often different, optimization algorithm, noise model and initialization strategy to estimate its parameter maps. Since data fit, accuracy and precision is hard to verify, this creates additional challenges to comparability and generalization of results from diffusion microstructure models. In addition, non-linear optimization is computationally expensive leading to very long run times, which can be prohibitive in large group or population studies. In this technical note we investigate the performance of several optimization algorithms and initialization strategies over a few of the most popular diffusion microstructure models, including NODDI and CHARMED. We evaluate whether a single well performing optimization approach exists that could be applied to many models and would equate both run time and fit aspects. All models, algorithms and strategies were implemented on the Graphics Processing Unit (GPU) to remove run time constraints, with which we achieve whole brain dataset fits in seconds to minutes. We then evaluated fit, accuracy, precision and run time for different models of differing complexity against three common optimization algorithms and three parameter initialization strategies. Variability of the achieved quality of fit in actual data was evaluated on ten subjects of each of two population studies with a different acquisition protocol. We find that optimization algorithms and multi-step optimization approaches have a considerable influence on performance and stability over subjects and over acquisition protocols. The gradient-free Powell conjugate-direction algorithm was found to outperform other common algorithms in terms of run time, fit, accuracy and precision. Parameter initialization approaches were found to be relevant especially for more complex models, such as those involving several fiber orientations per voxel. For these, a fitting cascade initializing or fixing parameter values in a later optimization step from simpler models in an earlier optimization step further improved run time, fit, accuracy and precision compared to a single step fit. This establishes and makes available standards by which robust fit and accuracy can be achieved in shorter run times. This is especially relevant for the use of diffusion microstructure modeling in large group or population studies and in combining microstructure parameter maps with tractography results. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Effect of Minimalist Footwear on Running Efficiency: A Randomized Crossover Trial.

PubMed

Gillinov, Stephen M; Laux, Sara; Kuivila, Thomas; Hass, Daniel; Joy, Susan M

2015-05-01

Although minimalist footwear is increasingly popular among runners, claims that minimalist footwear enhances running biomechanics and efficiency are controversial. Minimalist and barefoot conditions improve running efficiency when compared with traditional running shoes. Randomized crossover trial. Level 3. Fifteen experienced runners each completed three 90-second running trials on a treadmill, each trial performed in a different type of footwear: traditional running shoes with a heavily cushioned heel, minimalist running shoes with minimal heel cushioning, and barefoot (socked). High-speed photography was used to determine foot strike, ground contact time, knee angle, and stride cadence with each footwear type. Runners had more rearfoot strikes in traditional shoes (87%) compared with minimalist shoes (67%) and socked (40%) (P = 0.03). Ground contact time was longest in traditional shoes (265.9 ± 10.9 ms) when compared with minimalist shoes (253.4 ± 11.2 ms) and socked (250.6 ± 16.2 ms) (P = 0.005). There was no difference between groups with respect to knee angle (P = 0.37) or stride cadence (P = 0.20). When comparing running socked to running with minimalist running shoes, there were no differences in measures of running efficiency. When compared with running in traditional, cushioned shoes, both barefoot (socked) running and minimalist running shoes produce greater running efficiency in some experienced runners, with a greater tendency toward a midfoot or forefoot strike and a shorter ground contact time. Minimalist shoes closely approximate socked running in the 4 measurements performed. With regard to running efficiency and biomechanics, in some runners, barefoot (socked) and minimalist footwear are preferable to traditional running shoes.

Compilation time analysis to minimize run-time overhead in preemptive scheduling on multiprocessors

NASA Astrophysics Data System (ADS)

Wauters, Piet; Lauwereins, Rudy; Peperstraete, J.

1994-10-01

This paper describes a scheduling method for hard real-time Digital Signal Processing (DSP) applications, implemented on a multi-processor. Due to the very high operating frequencies of DSP applications (typically hundreds of kHz) runtime overhead should be kept as small as possible. Because static scheduling introduces very little run-time overhead it is used as much as possible. Dynamic pre-emption of tasks is allowed if and only if it leads to better performance in spite of the extra run-time overhead. We essentially combine static scheduling with dynamic pre-emption using static priorities. Since we are dealing with hard real-time applications we must be able to guarantee at compile-time that all timing requirements will be satisfied at run-time. We will show that our method performs at least as good as any static scheduling method. It also reduces the total amount of dynamic pre-emptions compared with run time methods like deadline monotonic scheduling.

Development and performance of a new version of the OASIS coupler, OASIS3-MCT_3.0

NASA Astrophysics Data System (ADS)

Craig, Anthony; Valcke, Sophie; Coquart, Laure

2017-09-01

OASIS is coupling software developed primarily for use in the climate community. It provides the ability to couple different models with low implementation and performance overhead. OASIS3-MCT is the latest version of OASIS. It includes several improvements compared to OASIS3, including elimination of a separate hub coupler process, parallelization of the coupling communication and run-time grid interpolation, and the ability to easily reuse mapping weight files. OASIS3-MCT_3.0 is the latest release and includes the ability to couple between components running sequentially on the same set of tasks as well as to couple within a single component between different grids or decompositions such as physics, dynamics, and I/O. OASIS3-MCT has been tested with different configurations on up to 32 000 processes, with components running on high-resolution grids with up to 1.5 million grid cells, and with over 10 000 2-D coupling fields. Several new features will be available in OASIS3-MCT_4.0, and some of those are also described.

Streaming data analytics via message passing with application to graph algorithms

DOE PAGES

Plimpton, Steven J.; Shead, Tim

2014-05-06

The need to process streaming data, which arrives continuously at high-volume in real-time, arises in a variety of contexts including data produced by experiments, collections of environmental or network sensors, and running simulations. Streaming data can also be formulated as queries or transactions which operate on a large dynamic data store, e.g. a distributed database. We describe a lightweight, portable framework named PHISH which enables a set of independent processes to compute on a stream of data in a distributed-memory parallel manner. Datums are routed between processes in patterns defined by the application. PHISH can run on top of eithermore » message-passing via MPI or sockets via ZMQ. The former means streaming computations can be run on any parallel machine which supports MPI; the latter allows them to run on a heterogeneous, geographically dispersed network of machines. We illustrate how PHISH can support streaming MapReduce operations, and describe streaming versions of three algorithms for large, sparse graph analytics: triangle enumeration, subgraph isomorphism matching, and connected component finding. Lastly, we also provide benchmark timings for MPI versus socket performance of several kernel operations useful in streaming algorithms.« less

Associations of age, aerobic fitness, and body mass index with injury in an operational Army brigade.

PubMed

Rappole, Catherine; Grier, Tyson; Anderson, Morgan K; Hauschild, Veronique; Jones, Bruce H

2017-11-01

To investigate the effects of age, aerobic fitness, and body mass index (BMI) on injury risk in operational Army soldiers. Retrospective cohort study. Male soldiers from an operational Army brigade were administered electronic surveys regarding personal characteristics, physical fitness, and injuries occurring over the last 12 months. Injury risks were stratified by age, 2-mile run time, and BMI. Analyses included descriptive incidence, a Mantel-Haenszel χ 2 test to determine trends, a multivariable logistic regression to determine factors associated with injury, and a one-way analysis of variance (ANOVA). Forty-seventy percent of 1099 respondents reported at least one injury. A linear trend showed that as age, 2-mile run time, and BMI increased, so did injury risk (p<0.01). When controlling for BMI, the most significant independent injury risk factors were older age (odd ratio (OR) 30years-35years/≤24years=1.25, 95%CI: 1.08-2.32), (OR≥36years/≤24years=2.05, 95%CI: 1.36-3.10), and slow run times (OR≥15.9min/≤13.9min=1.91, 95%CI: 1.28-2.85). An ANOVA showed that both run times and BMI increased with age. The stratified analysis and the multivariable logistic regression suggested that older age and poor aerobic fitness are stronger predictors of injury than BMI. Copyright © 2017 Sports Medicine Australia. All rights reserved.

16 CFR 803.10 - Running of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Running of time. 803.10 Section 803.10 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 TRANSMITTAL RULES § 803.10 Running of time. (a...

The Katydid system for compiling KEE applications to Ada

NASA Technical Reports Server (NTRS)

Filman, Robert E.; Bock, Conrad; Feldman, Roy

1990-01-01

Components of a system known as Katydid are developed in an effort to compile knowledge-based systems developed in a multimechanism integrated environment (KEE) to Ada. The Katydid core is an Ada library supporting KEE object functionality, and the other elements include a rule compiler, a LISP-to-Ada translator, and a knowledge-base dumper. Katydid employs translation mechanisms that convert LISP knowledge structures and rules to Ada and utilizes basic prototypes of a run-time KEE object-structure library module for Ada. Preliminary results include the semiautomatic compilation of portions of a simple expert system to run in an Ada environment with the described algorithms. It is suggested that Ada can be employed for AI programming and implementation, and the Katydid system is being developed to include concurrency and synchronization mechanisms.

Run Clever – No difference in risk of injury when comparing progression in running volume and running intensity in recreational runners: A randomised trial

PubMed Central

Rasmussen, Sten; Sørensen, Henrik; Parner, Erik Thorlund; Lind, Martin; Nielsen, Rasmus Oestergaard

2018-01-01

Background/aim The Run Clever trial investigated if there was a difference in injury occurrence across two running schedules, focusing on progression in volume of running intensity (Sch-I) or in total running volume (Sch-V). It was hypothesised that 15% more runners with a focus on progression in volume of running intensity would sustain an injury compared with runners with a focus on progression in total running volume. Methods Healthy recreational runners were included and randomly allocated to Sch-I or Sch-V. In the first eight weeks of the 24-week follow-up, all participants (n=839) followed the same running schedule (preconditioning). Participants (n=447) not censored during the first eight weeks entered the 16-week training period with a focus on either progression in intensity (Sch-I) or volume (Sch-V). A global positioning system collected all data on running. During running, all participants received real-time, individualised feedback on running intensity and running volume. The primary outcome was running-related injury (RRI). Results After preconditioning a total of 80 runners sustained an RRI (Sch-I n=36/Sch-V n=44). The cumulative incidence proportion (CIP) in Sch-V (reference group) were CIP2 weeks 4.6%; CIP4 weeks 8.2%; CIP8 weeks 13.2%; CIP16 weeks 28.0%. The risk differences (RD) and 95% CI between the two schedules were RD2 weeks=2.9%(−5.7% to 11.6%); RD4 weeks=1.8%(−9.1% to 12.8%); RD8 weeks=−4.7%(−17.5% to 8.1%); RD16 weeks=−14.0% (−36.9% to 8.9%). Conclusion A similar proportion of runners sustained injuries in the two running schedules. PMID:29527322

Altered Running Economy Directly Translates to Altered Distance-Running Performance.

PubMed

Hoogkamer, Wouter; Kipp, Shalaya; Spiering, Barry A; Kram, Rodger

2016-11-01

Our goal was to quantify if small (1%-3%) changes in running economy quantitatively affect distance-running performance. Based on the linear relationship between metabolic rate and running velocity and on earlier observations that added shoe mass increases metabolic rate by ~1% per 100 g per shoe, we hypothesized that adding 100 and 300 g per shoe would slow 3000-m time-trial performance by 1% and 3%, respectively. Eighteen male sub-20-min 5-km runners completed treadmill testing, and three 3000-m time trials wearing control shoes and identical shoes with 100 and 300 g of discreetly added mass. We measured rates of oxygen consumption and carbon dioxide production and calculated metabolic rates for the treadmill tests, and we recorded overall running time for the time trials. Adding mass to the shoes significantly increased metabolic rate at 3.5 m·s by 1.11% per 100 g per shoe (95% confidence interval = 0.88%-1.35%). While wearing the control shoes, participants ran the 3000-m time trial in 626.1 ± 55.6 s. Times averaged 0.65% ± 1.36% and 2.37% ± 2.09% slower for the +100-g and +300-g shoes, respectively (P < 0.001). On the basis of a linear fit of all the data, 3000-m time increased 0.78% per added 100 g per shoe (95% confidence interval = 0.52%-1.04%). Adding shoe mass predictably degrades running economy and slows 3000-m time-trial performance proportionally. Our data demonstrate that laboratory-based running economy measurements can accurately predict changes in distance-running race performance due to shoe modifications.

Running performance and thermal sensation in the heat are improved with menthol mouth rinse but not ice slurry ingestion.

PubMed

Stevens, C J; Thoseby, B; Sculley, D V; Callister, R; Taylor, L; Dascombe, B J

2016-10-01

The purpose of this study was to compare the effects of a cooling strategy designed to predominately lower thermal state with a strategy designed to lower thermal sensation on endurance running performance and physiology in the heat. Eleven moderately trained male runners completed familiarization and three randomized, crossover 5-km running time trials on a non-motorized treadmill in hot conditions (33 °C). The trials included ice slurry ingestion before exercise (ICE), menthol mouth rinse during exercise (MEN), and no intervention (CON). Running performance was significantly improved with MEN (25.3 ± 3.5 min; P = 0.01), but not ICE (26.3 ± 3.2 min; P = 0.45) when compared with CON (26.0 ± 3.4 min). Rectal temperature was significantly decreased with ICE (by 0.3 ± 0.2 °C; P < 0.01), which persisted for 2 km of the run and MEN significantly decreased perceived thermal sensation (between 4 and 5 km) and ventilation (between 1 and 2 km) during the time trial. End-exercise blood prolactin concentration was elevated with MEN compared with CON (by 25.1 ± 24.4 ng/mL; P = 0.02). The data demonstrate that a change in the perception of thermal sensation during exercise from menthol mouth rinse was associated with improved endurance running performance in the heat. Ice slurry ingestion reduced core temperature but did not decrease thermal sensation during exercise or improve running performance. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Iron deficiency anemia

MedlinePlus

Anemia - iron deficiency ... iron from old red blood cells. Iron deficiency anemia develops when your body's iron stores run low. ... You may have no symptoms if the anemia is mild. Most of the time, ... slowly. Symptoms may include: Feeling weak or tired more often ...

Investigations of timing during the schedule and reinforcement intervals with wheel-running reinforcement.

PubMed

Belke, Terry W; Christie-Fougere, Melissa M

2006-11-01

Across two experiments, a peak procedure was used to assess the timing of the onset and offset of an opportunity to run as a reinforcer. The first experiment investigated the effect of reinforcer duration on temporal discrimination of the onset of the reinforcement interval. Three male Wistar rats were exposed to fixed-interval (FI) 30-s schedules of wheel-running reinforcement and the duration of the opportunity to run was varied across values of 15, 30, and 60s. Each session consisted of 50 reinforcers and 10 probe trials. Results showed that as reinforcer duration increased, the percentage of postreinforcement pauses longer than the 30-s schedule interval increased. On probe trials, peak response rates occurred near the time of reinforcer delivery and peak times varied with reinforcer duration. In a second experiment, seven female Long-Evans rats were exposed to FI 30-s schedules leading to 30-s opportunities to run. Timing of the onset and offset of the reinforcement period was assessed by probe trials during the schedule interval and during the reinforcement interval in separate conditions. The results provided evidence of timing of the onset, but not the offset of the wheel-running reinforcement period. Further research is required to assess if timing occurs during a wheel-running reinforcement period.

Fundamental movement skills testing in children with cerebral palsy.

PubMed

Capio, Catherine M; Sit, Cindy H P; Abernethy, Bruce

2011-01-01

To examine the inter-rater reliability and comparative validity of product-oriented and process-oriented measures of fundamental movement skills among children with cerebral palsy (CP). In total, 30 children with CP aged 6 to 14 years (Mean = 9.83, SD = 2.5) and classified in Gross Motor Function Classification System (GMFCS) levels I-III performed tasks of catching, throwing, kicking, horizontal jumping and running. Process-oriented assessment was undertaken using a number of components of the Test of Gross Motor Development (TGMD-2), while product-oriented assessment included measures of time taken, distance covered and number of successful task completions. Cohen's kappa, Spearman's rank correlation coefficient and tests to compare correlated correlation coefficients were performed. Very good inter-rater reliability was found. Process-oriented measures for running and jumping had significant associations with GMFCS, as did seven product-oriented measures for catching, throwing, kicking, running and jumping. Product-oriented measures of catching, kicking and running had stronger associations with GMFCS than the corresponding process-oriented measures. Findings support the validity of process-oriented measures for running and jumping and of product-oriented measures of catching, throwing, kicking, running and jumping. However, product-oriented measures for catching, kicking and running appear to have stronger associations with functional abilities of children with CP, and are thus recommended for use in rehabilitation processes.

Regulation of substrate use during the marathon.

PubMed

Spriet, Lawrence L

2007-01-01

The energy required to run a marathon is mainly provided through oxidative phosphorylation in the mitochondria of the active muscles. Small amounts of energy from substrate phosphorylation are also required during transitions and short periods when running speed is increased. The three inputs for adenosine triphosphate production in the mitochondria include oxygen, free adenosine diphosphate and inorganic phosphate, and reducing equivalents. The reducing equivalents are derived from the metabolism of fat and carbohydrate (CHO), which are mobilised from intramuscular stores and also delivered from adipose tissue and liver, respectively. The metabolism of fat and CHO is tightly controlled at several regulatory sites during marathon running. Slower, recreational runners run at 60-65% maximal oxygen uptake (VO(2max)) for approximately 3:45:00 and faster athletes run at 70-75% for approximately 2:45:00. Both groups rely heavily on fat and CHO fuels. However, elite athletes run marathons at speeds requiring between 80% and 90% VO(2max), and finish in times between 2:05:00 and 2:20:00. They are highly adapted to oxidise fat and must do so during training. However, they compete at such high running speeds, that CHO oxidation (also highly adapted) may be the exclusive source of energy while racing. Further work with elite athletes is needed to examine this possibility.

Analysis of Community Detection Algorithms for Large Scale Cyber Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mane, Prachita; Shanbhag, Sunanda; Kamath, Tanmayee

The aim of this project is to use existing community detection algorithms on an IP network dataset to create supernodes within the network. This study compares the performance of different algorithms on the network in terms of running time. The paper begins with an introduction to the concept of clustering and community detection followed by the research question that the team aimed to address. Further the paper describes the graph metrics that were considered in order to shortlist algorithms followed by a brief explanation of each algorithm with respect to the graph metric on which it is based. The nextmore » section in the paper describes the methodology used by the team in order to run the algorithms and determine which algorithm is most efficient with respect to running time. Finally, the last section of the paper includes the results obtained by the team and a conclusion based on those results as well as future work.« less

ChronQC: a quality control monitoring system for clinical next generation sequencing.

PubMed

Tawari, Nilesh R; Seow, Justine Jia Wen; Perumal, Dharuman; Ow, Jack L; Ang, Shimin; Devasia, Arun George; Ng, Pauline C

2018-05-15

ChronQC is a quality control (QC) tracking system for clinical implementation of next-generation sequencing (NGS). ChronQC generates time series plots for various QC metrics to allow comparison of current runs to historical runs. ChronQC has multiple features for tracking QC data including Westgard rules for clinical validity, laboratory-defined thresholds and historical observations within a specified time period. Users can record their notes and corrective actions directly onto the plots for long-term recordkeeping. ChronQC facilitates regular monitoring of clinical NGS to enable adherence to high quality clinical standards. ChronQC is freely available on GitHub (https://github.com/nilesh-tawari/ChronQC), Docker (https://hub.docker.com/r/nileshtawari/chronqc/) and the Python Package Index. ChronQC is implemented in Python and runs on all common operating systems (Windows, Linux and Mac OS X). tawari.nilesh@gmail.com or pauline.c.ng@gmail.com. Supplementary data are available at Bioinformatics online.

A randomized controlled trial of manual therapy and pneumatic compression for recovery from prolonged running - an extended study.

PubMed

Heapy, Amanda M; Hoffman, Martin D; Verhagen, Heidie H; Thompson, Samuel W; Dhamija, Pavitra; Sandford, Fiona J; Cooper, Mary C

2018-03-07

Manual therapy (MT) and intermittent pneumatic compression (IPC) are recovery methods used by endurance athletes with little evidence supporting effectiveness. This randomized controlled trial evaluated effectiveness of four daily post-race treatments of a specific MT protocol and IPC compared with supine rest on recovery following an ultramarathon among 56 ultramarathoners. Groups were comparable across all characteristics examined, including post-race plasma creatine kinase concentration. Subject completed timed 400 m runs before the race and on days three, five, seven and 14 post- race, and also provided muscle pain and soreness ratings and fatigue scores immediately before and after treatments, and during the 14 days post- race. Daily subjective measures and 400 m run times were not improved by either treatment, but both treatments reduced (p < .05) muscular fatigue scores acutely after treatment following the race and on post-race day 1, and MT improved (p < .05) muscle pain and soreness acutely following the race.

SARANA: language, compiler and run-time system support for spatially aware and resource-aware mobile computing.

PubMed

Hari, Pradip; Ko, Kevin; Koukoumidis, Emmanouil; Kremer, Ulrich; Martonosi, Margaret; Ottoni, Desiree; Peh, Li-Shiuan; Zhang, Pei

2008-10-28

Increasingly, spatial awareness plays a central role in many distributed and mobile computing applications. Spatially aware applications rely on information about the geographical position of compute devices and their supported services in order to support novel functionality. While many spatial application drivers already exist in mobile and distributed computing, very little systems research has explored how best to program these applications, to express their spatial and temporal constraints, and to allow efficient implementations on highly dynamic real-world platforms. This paper proposes the SARANA system architecture, which includes language and run-time system support for spatially aware and resource-aware applications. SARANA allows users to express spatial regions of interest, as well as trade-offs between quality of result (QoR), latency and cost. The goal is to produce applications that use resources efficiently and that can be run on diverse resource-constrained platforms ranging from laptops to personal digital assistants and to smart phones. SARANA's run-time system manages QoR and cost trade-offs dynamically by tracking resource availability and locations, brokering usage/pricing agreements and migrating programs to nodes accordingly. A resource cost model permeates the SARANA system layers, permitting users to express their resource needs and QoR expectations in units that make sense to them. Although we are still early in the system development, initial versions have been demonstrated on a nine-node system prototype.

A conceptual framework for dynamic extension of the red clearance interval as a countermeasure for red-light-running.

PubMed

Gates, Timothy J; Noyce, David A

2016-11-01

This manuscript describes the development and evaluation of a conceptual framework for real-time operation of dynamic on-demand extension of the red clearance interval as a countermeasure for red-light-running. The framework includes a decision process for determining, based on the real-time status of vehicles arriving at the intersection, when extension of the red clearance interval should occur and the duration of each extension. A zonal classification scheme was devised to assess whether an approaching vehicle requires additional time to safely clear the intersection based on the remaining phase time, type of vehicle, current speed, and current distance from the intersection. Expected performance of the conceptual framework was evaluated through modeling of replicated field operations using vehicular event data collected as part of this research. The results showed highly accurate classification of red-light-running vehicles needing additional clearance time and relatively few false extension calls from stopping vehicles, thereby minimizing the expected impacts to signal and traffic operations. Based on the recommended parameters, extension calls were predicted to occur once every 26.5cycles. Assuming a 90scycle, 1.5 extensions per hour were expected per approach, with an estimated extension time of 2.30s/h. Although field implementation was not performed, it is anticipated that long-term reductions in targeted red-light-running conflicts and crashes will likely occur if red clearance interval extension systems are implemented at locations where start-up delay on the conflicting approach is generally minimal, such as intersections with lag left-turn phasing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recruit Fitness as a Predictor of Police Academy Graduation.

PubMed

Shusko, M; Benedetti, L; Korre, M; Eshleman, E J; Farioli, A; Christophi, C A; Kales, S N

2017-10-01

Suboptimal recruit fitness may be a risk factor for poor performance, injury, illness, and lost time during police academy training. To assess the probability of successful completion and graduation from a police academy as a function of recruits' baseline fitness levels at the time of academy entry. Retrospective study where all available records from recruit training courses held (2006-2012) at all Massachusetts municipal police academies were reviewed and analysed. Entry fitness levels were quantified from the following measures, as recorded at the start of each training class: body composition, push-ups, sit-ups, sit-and-reach, and 1.5-mile run-time. The primary outcome of interest was the odds of not successfully graduating from an academy. We used generalized linear mixed models in order to fit logistic regression models with random intercepts for assessing the probability of not graduating, based on entry-level fitness. The primary analyses were restricted to recruits with complete entry-level fitness data. The fitness measures most strongly associated with academy failure were lesser number of push-ups completed (odds ratio [OR] = 5.2, 95% confidence interval [CI] 2.3-11.7, for 20 versus 41-60 push-ups) and slower run times (OR = 3.8, 95% CI 1.8-7.8, [1.5 mile run time of ≥15'20″] versus [12'33″ to 10'37″]). Baseline pushups and 1.5-mile run-time showed the best ability to predict successful academy graduation, especially when considered together. Future research should include prospective validation of entry-level fitness as a predictor of subsequent police academy success. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

40 CFR Table 1 to Subpart Eeee of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... determiningcompliance using this method 1. Cadmium 18 micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour...

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

40 CFR Table 1 to Subpart Eeee of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... determiningcompliance using this method 1. Cadmium 18 micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour...

Sustained Accelerated Idioventricular Rhythm in a Centrifuge-Simulated Suborbital Spaceflight.

PubMed

Suresh, Rahul; Blue, Rebecca S; Mathers, Charles; Castleberry, Tarah L; Vanderploeg, James M

2017-08-01

Hypergravitational exposures during human centrifugation are known to provoke dysrhythmias, including sinus dysrhythmias/tachycardias, premature atrial/ventricular contractions, and even atrial fibrillations or flutter patterns. However, events are generally short-lived and resolve rapidly after cessation of acceleration. This case report describes a prolonged ectopic ventricular rhythm in response to high G exposure. A previously healthy 30-yr-old man voluntarily participated in centrifuge trials as a part of a larger study, experiencing a total of 7 centrifuge runs over 48 h. Day 1 consisted of two +Gz runs (peak +3.5 Gz, run 2) and two +Gx runs (peak +6.0 Gx, run 4). Day 2 consisted of three runs approximating suborbital spaceflight profiles (combined +Gx and +Gz). Hemodynamic data collected included blood pressure, heart rate, and continuous three-lead electrocardiogram. Following the final acceleration exposure of the last Day 2 run (peak +4.5 Gx and +4.0 Gz combined, resultant +6.0 G), during a period of idle resting centrifuge activity (resultant vector +1.4 G), the subject demonstrated a marked change in his three-lead electrocardiogram from normal sinus rhythm to a wide-complex ectopic ventricular rhythm at a rate of 91-95 bpm, consistent with an accelerated idioventricular rhythm (AIVR). This rhythm was sustained for 2 m, 24 s before reversion to normal sinus. The subject reported no adverse symptoms during this time. While prolonged, the dysrhythmia was asymptomatic and self-limited. AIVR is likely a physiological response to acceleration and can be managed conservatively. Vigilance is needed to ensure that AIVR is correctly distinguished from other, malignant rhythms to avoid inappropriate treatment and negative operational impacts.Suresh R, Blue RS, Mathers C, Castleberry TL, Vanderploeg JM. Sustained accelerated idioventricular rhythm in a centrifuge-simulated suborbital spaceflight. Aerosp Med Hum Perform. 2017; 88(8):789-793.

Tethered satellite system dynamics and control review panel and related activities, phase 3

NASA Technical Reports Server (NTRS)

1991-01-01

Two major tests of the Tethered Satellite System (TSS) engineering and flight units were conducted to demonstrate the functionality of the hardware and software. Deficiencies in the hardware/software integration tests (HSIT) led to a recommendation for more testing to be performed. Selected problem areas of tether dynamics were analyzed, including verification of the severity of skip rope oscillations, verification or comparison runs to explore dynamic phenomena observed in other simulations, and data generation runs to explore the performance of the time domain and frequency domain skip rope observers.

Effect of Minimalist Footwear on Running Efficiency

PubMed Central

Gillinov, Stephen M.; Laux, Sara; Kuivila, Thomas; Hass, Daniel; Joy, Susan M.

2015-01-01

Background: Although minimalist footwear is increasingly popular among runners, claims that minimalist footwear enhances running biomechanics and efficiency are controversial. Hypothesis: Minimalist and barefoot conditions improve running efficiency when compared with traditional running shoes. Study Design: Randomized crossover trial. Level of Evidence: Level 3. Methods: Fifteen experienced runners each completed three 90-second running trials on a treadmill, each trial performed in a different type of footwear: traditional running shoes with a heavily cushioned heel, minimalist running shoes with minimal heel cushioning, and barefoot (socked). High-speed photography was used to determine foot strike, ground contact time, knee angle, and stride cadence with each footwear type. Results: Runners had more rearfoot strikes in traditional shoes (87%) compared with minimalist shoes (67%) and socked (40%) (P = 0.03). Ground contact time was longest in traditional shoes (265.9 ± 10.9 ms) when compared with minimalist shoes (253.4 ± 11.2 ms) and socked (250.6 ± 16.2 ms) (P = 0.005). There was no difference between groups with respect to knee angle (P = 0.37) or stride cadence (P = 0.20). When comparing running socked to running with minimalist running shoes, there were no differences in measures of running efficiency. Conclusion: When compared with running in traditional, cushioned shoes, both barefoot (socked) running and minimalist running shoes produce greater running efficiency in some experienced runners, with a greater tendency toward a midfoot or forefoot strike and a shorter ground contact time. Minimalist shoes closely approximate socked running in the 4 measurements performed. Clinical Relevance: With regard to running efficiency and biomechanics, in some runners, barefoot (socked) and minimalist footwear are preferable to traditional running shoes. PMID:26131304

The Effect of Training in Minimalist Running Shoes on Running Economy

PubMed Central

Ridge, Sarah T.; Standifird, Tyler; Rivera, Jessica; Johnson, A. Wayne; Mitchell, Ulrike; Hunter, Iain

2015-01-01

The purpose of this study was to examine the effect of minimalist running shoes on oxygen uptake during running before and after a 10-week transition from traditional to minimalist running shoes. Twenty-five recreational runners (no previous experience in minimalist running shoes) participated in submaximal VO2 testing at a self-selected pace while wearing traditional and minimalist running shoes. Ten of the 25 runners gradually transitioned to minimalist running shoes over 10 weeks (experimental group), while the other 15 maintained their typical training regimen (control group). All participants repeated submaximal VO2 testing at the end of 10 weeks. Testing included a 3 minute warm-up, 3 minutes of running in the first pair of shoes, and 3 minutes of running in the second pair of shoes. Shoe order was randomized. Average oxygen uptake was calculated during the last minute of running in each condition. The average change from pre- to post-training for the control group during testing in traditional and minimalist shoes was an improvement of 3.1 ± 15.2% and 2.8 ± 16.2%, respectively. The average change from pre- to post-training for the experimental group during testing in traditional and minimalist shoes was an improvement of 8.4 ± 7.2% and 10.4 ± 6.9%, respectively. Data were analyzed using a 2-way repeated measures ANOVA. There were no significant interaction effects, but the overall improvement in running economy across time (6.15%) was significant (p = 0.015). Running in minimalist running shoes improves running economy in experienced, traditionally shod runners, but not significantly more than when running in traditional running shoes. Improvement in running economy in both groups, regardless of shoe type, may have been due to compliance with training over the 10-week study period and/or familiarity with testing procedures. Key points Running in minimalist footwear did not result in a change in running economy compared to running in traditional footwear prior to 10 weeks of training. Both groups (control and experimental) showed an improvement in running economy in both types of shoes after 10 weeks of training. After transitioning to minimalist running shoes, running economy was not significantly different while running in traditional or minimalist footwear. PMID:26336352

The Effect of Training in Minimalist Running Shoes on Running Economy.

PubMed

Ridge, Sarah T; Standifird, Tyler; Rivera, Jessica; Johnson, A Wayne; Mitchell, Ulrike; Hunter, Iain

2015-09-01

The purpose of this study was to examine the effect of minimalist running shoes on oxygen uptake during running before and after a 10-week transition from traditional to minimalist running shoes. Twenty-five recreational runners (no previous experience in minimalist running shoes) participated in submaximal VO2 testing at a self-selected pace while wearing traditional and minimalist running shoes. Ten of the 25 runners gradually transitioned to minimalist running shoes over 10 weeks (experimental group), while the other 15 maintained their typical training regimen (control group). All participants repeated submaximal VO2 testing at the end of 10 weeks. Testing included a 3 minute warm-up, 3 minutes of running in the first pair of shoes, and 3 minutes of running in the second pair of shoes. Shoe order was randomized. Average oxygen uptake was calculated during the last minute of running in each condition. The average change from pre- to post-training for the control group during testing in traditional and minimalist shoes was an improvement of 3.1 ± 15.2% and 2.8 ± 16.2%, respectively. The average change from pre- to post-training for the experimental group during testing in traditional and minimalist shoes was an improvement of 8.4 ± 7.2% and 10.4 ± 6.9%, respectively. Data were analyzed using a 2-way repeated measures ANOVA. There were no significant interaction effects, but the overall improvement in running economy across time (6.15%) was significant (p = 0.015). Running in minimalist running shoes improves running economy in experienced, traditionally shod runners, but not significantly more than when running in traditional running shoes. Improvement in running economy in both groups, regardless of shoe type, may have been due to compliance with training over the 10-week study period and/or familiarity with testing procedures. Key pointsRunning in minimalist footwear did not result in a change in running economy compared to running in traditional footwear prior to 10 weeks of training.Both groups (control and experimental) showed an improvement in running economy in both types of shoes after 10 weeks of training.After transitioning to minimalist running shoes, running economy was not significantly different while running in traditional or minimalist footwear.

Expansion of the Real-time Sport-land Information System for NOAA / National Weather Service Situational Awareness and Local Modeling Applications

NASA Technical Reports Server (NTRS)

Case, Jonathan L.; White, Kristopher D.

2014-01-01

The NASA Short-term Prediction Research and Transition (SPoRT) Center in Huntsville, AL (Jedlovec 2013; Ralph et al. 2013; Merceret et al. 2013) is running a real-time configuration of the Noah land surface model (LSM) within the NASA Land Information System (LIS) framework (hereafter referred to as the "SPoRT-LIS"). Output from the real-time SPoRT-LIS is used for (1) initializing land surface variables for local modeling applications, and (2) displaying in decision support systems for situational awareness and drought monitoring at select NOAA/National Weather Service (NWS) partner offices. The SPoRT-LIS is currently run over a domain covering the southeastern half of the Continental United States (CONUS), with an additional experimental real-time run over the entire CONUS and surrounding portions of southern Canada and northern Mexico. The experimental CONUS run incorporates hourly quantitative precipitation estimation (QPE) from the National Severe Storms Laboratory Multi- Radar Multi-Sensor (MRMS) product (Zhang et al. 2011, 2014), which will be transitioned into operations at the National Centers for Environmental Prediction (NCEP) in Fall 2014. This paper describes the current and experimental SPoRT-LIS configurations, and documents some of the limitations still remaining through the advent of MRMS precipitation analyses in the SPoRT-LIS land surface model (LSM) simulations. Section 2 gives background information on the NASA LIS and describes the realtime SPoRT-LIS configurations being compared. Section 3 presents recent work done to develop a training module on situational awareness applications of real-time SPoRT-LIS output. Comparisons between output from the two SPoRT-LIS runs are shown in Section 4, including a documentation of issues encountered in using the MRMS precipitation dataset. A summary and future work in given in Section 5, followed by acknowledgements and references.

5K Run: 7-Week Training Schedule for Beginners

MedlinePlus

... This 5K training schedule incorporates a mix of running, walking and resting. This combination helps reduce the ... you'll gradually increase the amount of time running and reduce the amount of time walking. If ...

Selecting and implementing the PBS scheduler on an SGI Onyx 2/Orgin 2000.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bittner, S.

1999-06-28

In the Mathematics and Computer Science Division at Argonne, the demand for resources on the Onyx 2 exceeds the resources available for consumption. To distribute these scarce resources effectively, we need a scheduling and resource management package with multiple capabilities. In particular, it must accept standard interactive user logins, allow batch jobs, backfill the system based on available resources, and permit system activities such as accounting to proceed without interruption. The package must include a mechanism to treat the graphic pipes as a schedulable resource. Also required is the ability to create advance reservations, offer dedicated system modes for largemore » resource runs and benchmarking, and track the resources consumed for each job run. Furthermore, our users want to be able to obtain repeatable timing results on job runs. And, of course, package costs must be carefully considered. We explored several options, including NQE and various third-party products, before settling on the PBS scheduler.« less

Effects of a minimalist shoe on running economy and 5-km running performance.

PubMed

Fuller, Joel T; Thewlis, Dominic; Tsiros, Margarita D; Brown, Nicholas A T; Buckley, Jonathan D

2016-09-01

The purpose of this study was to determine if minimalist shoes improve time trial performance of trained distance runners and if changes in running economy, shoe mass, stride length, stride rate and footfall pattern were related to any difference in performance. Twenty-six trained runners performed three 6-min sub-maximal treadmill runs at 11, 13 and 15 km·h(-1) in minimalist and conventional shoes while running economy, stride length, stride rate and footfall pattern were assessed. They then performed a 5-km time trial. In the minimalist shoe, runners completed the trial in less time (effect size 0.20 ± 0.12), were more economical during sub-maximal running (effect size 0.33 ± 0.14) and decreased stride length (effect size 0.22 ± 0.10) and increased stride rate (effect size 0.22 ± 0.11). All but one runner ran with a rearfoot footfall in the minimalist shoe. Improvements in time trial performance were associated with improvements in running economy at 15 km·h(-1) (r = 0.58), with 79% of the improved economy accounted for by reduced shoe mass (P < 0.05). The results suggest that running in minimalist shoes improves running economy and 5-km running performance.

Sex-related differences in the wheel-running activity of mice decline with increasing age.

PubMed

Bartling, Babett; Al-Robaiy, Samiya; Lehnich, Holger; Binder, Leonore; Hiebl, Bernhard; Simm, Andreas

2017-01-01

Laboratory mice of both sexes having free access to running wheels are commonly used to study mechanisms underlying the beneficial effects of physical exercise on health and aging in human. However, comparative wheel-running activity profiles of male and female mice for a long period of time in which increasing age plays an additional role are unknown. Therefore, we permanently recorded the wheel-running activity (i.e., total distance, median velocity, time of breaks) of female and male mice until 9months of age. Our records indicated higher wheel-running distances for females than males which were highest in 2-month-old mice. This was mainly reached by higher running velocities of the females and not by longer running times. However, the sex-related differences declined in parallel to the age-associated reduction in wheel-running activities. Female mice also showed more variances between the weekly running distances than males, which were recorded most often for females being 4-6months old but not older. Additional records of 24-month-old mice of both sexes indicated highly reduced wheel-running activities at old age. Surprisingly, this reduction at old age resulted mainly from lower running velocities and not from shorter running times. Old mice also differed in their course of night activity which peaked later compared to younger mice. In summary, we demonstrated the influence of sex on the age-dependent activity profile of mice which is somewhat contrasting to humans, and this has to be considered when transferring exercise-mediated mechanism from mouse to human. Copyright © 2016. Published by Elsevier Inc.

Real-time measurements of jet aircraft engine exhaust.

PubMed

Rogers, Fred; Arnott, Pat; Zielinska, Barbara; Sagebiel, John; Kelly, Kerry E; Wagner, David; Lighty, JoAnn S; Sarofim, Adel F

2005-05-01

Particulate-phase exhaust properties from two different types of ground-based jet aircraft engines--high-thrust and turboshaft--were studied with real-time instruments on a portable pallet and additional time-integrated sampling devices. The real-time instruments successfully characterized rapidly changing particulate mass, light absorption, and polycyclic aromatic hydrocarbon (PAH) content. The integrated measurements included particulate-size distributions, PAH, and carbon concentrations for an entire test run (i.e., "run-integrated" measurements). In all cases, the particle-size distributions showed single modes peaking at 20-40nm diameter. Measurements of exhaust from high-thrust F404 engines showed relatively low-light absorption compared with exhaust from a turboshaft engine. Particulate-phase PAH measurements generally varied in phase with both net particulate mass and with light-absorbing particulate concentrations. Unexplained response behavior sometimes occurred with the real-time PAH analyzer, although on average the real-time and integrated PAH methods agreed within the same order of magnitude found in earlier investigations.

mr: A C++ library for the matching and running of the Standard Model parameters

NASA Astrophysics Data System (ADS)

Kniehl, Bernd A.; Pikelner, Andrey F.; Veretin, Oleg L.

2016-09-01

We present the C++ program library mr that allows us to reliably calculate the values of the running parameters in the Standard Model at high energy scales. The initial conditions are obtained by relating the running parameters in the MS bar renormalization scheme to observables at lower energies with full two-loop precision. The evolution is then performed in accordance with the renormalization group equations with full three-loop precision. Pure QCD corrections to the matching and running are included through four loops. We also provide a Mathematica interface for this program library. Catalogue identifier: AFAI_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AFAI_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 517613 No. of bytes in distributed program, including test data, etc.: 2358729 Distribution format: tar.gz Programming language: C++. Computer: IBM PC. Operating system: Linux, Mac OS X. RAM: 1 GB Classification: 11.1. External routines: TSIL [1], OdeInt [2], boost [3] Nature of problem: The running parameters of the Standard Model renormalized in the MS bar scheme at some high renormalization scale, which is chosen by the user, are evaluated in perturbation theory as precisely as possible in two steps. First, the initial conditions at the electroweak energy scale are evaluated from the Fermi constant GF and the pole masses of the W, Z, and Higgs bosons and the bottom and top quarks including the full two-loop threshold corrections. Second, the evolution to the high energy scale is performed by numerically solving the renormalization group evolution equations through three loops. Pure QCD corrections to the matching and running are included through four loops. Solution method: Numerical integration of analytic expressions Additional comments: Available for download from URL: http://apik.github.io/mr/. The MathLink interface is tested to work with Mathematica 7-9 and, with an additional flag, also with Mathematica 10 under Linux and with Mathematica 10 under Mac OS X. Running time: less than 1 second References: [1] S. P. Martin and D. G. Robertson, Comput. Phys. Commun. 174 (2006) 133-151 [hep-ph/0501132]. [2] K. Ahnert and M. Mulansky, AIP Conf. Proc. 1389 (2011) 1586-1589 [arxiv:1110.3397 [cs.MS

An Empirical Derivation of the Run Time of the Bubble Sort Algorithm.

ERIC Educational Resources Information Center

Gonzales, Michael G.

1984-01-01

Suggests a moving pictorial tool to help teach principles in the bubble sort algorithm. Develops such a tool applied to an unsorted list of numbers and describes a method to derive the run time of the algorithm. The method can be modified to run the times of various other algorithms. (JN)

The relationship between aerobic fitness and recovery from high-intensity exercise in infantry soldiers.

PubMed

Hoffman, J R

1997-07-01

The relationship between aerobic fitness and recovery from high-intensity exercise was examined in 197 infantry soldiers. Aerobic fitness was determined by a maximal-effort, 2,000-m run (RUN). High-intensity exercise consisted of three bouts of a continuous 140-m sprint with several changes of direction. A 2-minute passive rest separated each sprint. A fatigue index was developed by dividing the mean time of the three sprints by the fastest time. Times for the RUN were converted into standardized T scores and separated into five groups (group 1 had the slowest run time and group 5 had the fastest run time). Significant differences in the fatigue index were seen between group 1 (4.9 +/- 2.4%) and groups 3 (2.6 +/- 1.7%), 4 (2.3 +/- 1.6%), and 5 (2.3 +/- 1.3%). It appears that recovery from high-intensity exercise is improved at higher levels of aerobic fitness (faster time for the RUN). However, as the level of aerobic fitness improves above the population mean, no further benefit in the recovery rate from high-intensity exercise is apparent.

Running Injuries in the Participants of Ljubljana Marathon

PubMed Central

Vitez, Luka; Zupet, Petra; Zadnik, Vesna; Drobnič, Matej

2017-01-01

Abstract Introduction The aim of our study was to determine the self-reported incidence and prevalence of running-related injuries among participants of the 18th Ljubljana Marathon, and to identify risk factors for their occurrence. Methods A customized questionnaire was distributed over registration. Independent samples of t-test and chi-square test were used to calculate the differences in risk factors occurrence in the injured and non-injured group. Factors which appeared significantly more frequently in the injured group were included further into multiple logistic regression analysis. Results The reported lifetime running injury (absence >2 weeks) incidence was: 46% none, 47% rarely, 4% occasionally, and 2% often. Most commonly injured body regions were: knee (30%), ankle and Achilles’ tendon (24%), foot (15%), and calf (12%). Male gender, running history of 1-3 years, and history of previous injuries were risk factors for life-time running injury. In the season preceding the event, 65% of participants had not experienced any running injuries, 19% of them reported minor problems (max 2 weeks absenteeism), but 10% and 7% suffered from moderate (absence 3-4 weeks) or major (more than 4 weeks pause) injuries. BMI was identified as the solely risk factor. Conclusions This self-reported study revealed a 53% lifetime prevalence of running-related injuries, with the predominate involvement of knee, ankle and Achilles’ tendon. One out of three recreational runners experienced at least one minor running injury per season. It seems that male gender, short running experience, previous injury, and BMI do increase the probability for running-related injuries. PMID:29062393

Improvements of the ALICE HLT data transport framework for LHC Run 2

NASA Astrophysics Data System (ADS)

Rohr, David; Krzwicki, Mikolaj; Engel, Heiko; Lehrbach, Johannes; Lindenstruth, Volker; ALICE Collaboration

2017-10-01

The ALICE HLT uses a data transport framework based on the publisher- subscriber message principle, which transparently handles the communication between processing components over the network and between processing components on the same node via shared memory with a zero copy approach. We present an analysis of the performance in terms of maximum achievable data rates and event rates as well as processing capabilities during Run 1 and Run 2. Based on this analysis, we present new optimizations we have developed for ALICE in Run 2. These include support for asynchronous transport via Zero-MQ which enables loops in the reconstruction chain graph and which is used to ship QA histograms to DQM. We have added asynchronous processing capabilities in order to support long-running tasks besides the event-synchronous reconstruction tasks in normal HLT operation. These asynchronous components run in an isolated process such that the HLT as a whole is resilient even to fatal errors in these asynchronous components. In this way, we can ensure that new developments cannot break data taking. On top of that, we have tuned the processing chain to cope with the higher event and data rates expected from the new TPC readout electronics (RCU2) and we have improved the configuration procedure and the startup time in order to increase the time where ALICE can take physics data. We analyze the maximum achievable data processing rates taking into account processing capabilities of CPUs and GPUs, buffer sizes, network bandwidth, the incoming links from the detectors, and the outgoing links to data acquisition.

Migration trends of Sockeye Salmon at the northern edge of their distribution

USGS Publications Warehouse

Carey, Michael P.; Zimmerman, Christian E.; Keith, Kevin D.; Schelske, Merlyn; Lean, Charles; Douglas, David C.

2017-01-01

Climate change is affecting arctic and subarctic ecosystems, and anadromous fish such as Pacific salmon Oncorhynchus spp. are particularly susceptible due to the physiological challenge of spawning migrations. Predicting how migratory timing will change under Arctic warming scenarios requires an understanding of how environmental factors drive salmon migrations. Multiple mechanisms exist by which environmental conditions may influence migrating salmon, including altered migration cues from the ocean and natal river. We explored relationships between interannual variability and annual migration timing (2003–2014) of Sockeye Salmon O. nerka in a subarctic watershed with environmental conditions at broad, intermediate, and local spatial scales. Low numbers of Sockeye Salmon have returned to this high-latitude watershed in recent years, and run size has been a dominant influence on the migration duration and the midpoint date of the run. The duration of the migration upriver varied by as much as 25 d across years, and shorter run durations were associated with smaller run sizes. The duration of the migration was also extended with warmer sea surface temperatures in the staging area and lower values of the North Pacific Index. The midpoint date of the total run was earlier when the run size was larger, whereas the midpoint date was delayed during years in which river temperatures warmed earlier in the season. Documenting factors related to the migration of Sockeye Salmon near the northern limit of their range provides insights into the determinants of salmon migrations and suggests processes that could be important for determining future changes in arctic and subarctic ecosystems.

Polishing the Image.

ERIC Educational Resources Information Center

Brodhead, Charles W.

1984-01-01

Describes the methods a school board used to recruit students for its vocational education programs. Methods include buying radio time and running public service announcements on radio, newspaper advertisements, direct mail, billboards, newsletters, slide/tape presentations, brochures, displays at shopping malls, and promotional items (calendars,…

The effect of footwear on running performance and running economy in distance runners.

PubMed

Fuller, Joel T; Bellenger, Clint R; Thewlis, Dominic; Tsiros, Margarita D; Buckley, Jonathan D

2015-03-01

The effect of footwear on running economy has been investigated in numerous studies. However, no systematic review and meta-analysis has synthesised the available literature and the effect of footwear on running performance is not known. The aim of this systematic review and meta-analysis was to investigate the effect of footwear on running performance and running economy in distance runners, by reviewing controlled trials that compare different footwear conditions or compare footwear with barefoot. The Web of Science, Scopus, MEDLINE, CENTRAL (Cochrane Central Register of Controlled Trials), EMBASE, AMED (Allied and Complementary Medicine), CINAHL and SPORTDiscus databases were searched from inception up until April 2014. Included articles reported on controlled trials that examined the effects of footwear or footwear characteristics (including shoe mass, cushioning, motion control, longitudinal bending stiffness, midsole viscoelasticity, drop height and comfort) on running performance or running economy and were published in a peer-reviewed journal. Of the 1,044 records retrieved, 19 studies were included in the systematic review and 14 studies were included in the meta-analysis. No studies were identified that reported effects on running performance. Individual studies reported significant, but trivial, beneficial effects on running economy for comfortable and stiff-soled shoes [standardised mean difference (SMD) <0.12; P < 0.05), a significant small beneficial effect on running economy for cushioned shoes (SMD = 0.37; P < 0.05) and a significant moderate beneficial effect on running economy for training in minimalist shoes (SMD = 0.79; P < 0.05). Meta-analysis found significant small beneficial effects on running economy for light shoes and barefoot compared with heavy shoes (SMD < 0.34; P < 0.01) and for minimalist shoes compared with conventional shoes (SMD = 0.29; P < 0.01). A significant positive association between shoe mass and metabolic cost of running was identified (P < 0.01). Footwear with a combined shoe mass less than 440 g per pair had no detrimental effect on running economy. Certain models of footwear and footwear characteristics can improve running economy. Future research in footwear performance should include measures of running performance.

40 CFR Table 2 to Subpart Ffff of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour rolling averages measured using CEMS b...

40 CFR Table 1 to Subpart Cccc of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of this part). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B of appendix A of this...

40 CFR Table 2 to Subpart Ffff of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour rolling averages measured using CEMS b...

40 CFR Table 1 to Subpart Cccc of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of this part). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B of appendix A of this...

40 CFR Table 2 to Subpart Dddd of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of this part) Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B, of appendix A of this part) Dioxins/furans...

Use of models to map potential capture of surface water

USGS Publications Warehouse

Leake, Stanley A.

2006-01-01

The effects of ground-water withdrawals on surface-water resources and riparian vegetation have become important considerations in water-availability studies. Ground water withdrawn by a well initially comes from storage around the well, but with time can eventually increase inflow to the aquifer and (or) decrease natural outflow from the aquifer. This increased inflow and decreased outflow is referred to as “capture.” For a given time, capture can be expressed as a fraction of withdrawal rate that is accounted for as increased rates of inflow and decreased rates of outflow. The time frames over which capture might occur at different locations commonly are not well understood by resource managers. A ground-water model, however, can be used to map potential capture for areas and times of interest. The maps can help managers visualize the possible timing of capture over large regions. The first step in the procedure to map potential capture is to run a ground-water model in steady-state mode without withdrawals to establish baseline total flow rates at all sources and sinks. The next step is to select a time frame and appropriate withdrawal rate for computing capture. For regional aquifers, time frames of decades to centuries may be appropriate. The model is then run repeatedly in transient mode, each run with one well in a different model cell in an area of interest. Differences in inflow and outflow rates from the baseline conditions for each model run are computed and saved. The differences in individual components are summed and divided by the withdrawal rate to obtain a single capture fraction for each cell. Values are contoured to depict capture fractions for the time of interest. Considerations in carrying out the analysis include use of realistic physical boundaries in the model, understanding the degree of linearity of the model, selection of an appropriate time frame and withdrawal rate, and minimizing error in the global mass balance of the model.

Time to audit.

PubMed

Smyth, L G; Martin, Z; Hall, B; Collins, D; Mealy, K

2012-09-01

Public and political pressures are increasing on doctors and in particular surgeons to demonstrate competence assurance. While surgical audit is an integral part of surgical practice, its implementation and delivery at a national level in Ireland is poorly developed. Limits to successful audit systems relate to lack of funding and administrative support. In Wexford General Hospital, we have a comprehensive audit system which is based on the Lothian Surgical Audit system. We wished to analyse the amount of time required by the Consultant, NCHDs and clerical staff on one surgical team to run a successful audit system. Data were collected over a calendar month. This included time spent coding and typing endoscopy procedures, coding and typing operative procedures, and typing and signing discharge letters. The total amount of time spent to run the audit system for one Consultant surgeon for one calendar month was 5,168 min or 86.1 h. Greater than 50% of this time related to work performed by administrative staff. Only the intern and administrative staff spent more than 5% of their working week attending to work related to the audit. An integrated comprehensive audit system requires a very little time input by Consultant surgeons. Greater than 90% of the workload in running the audit was performed by the junior house doctors and administrative staff. The main financial implications for national audit implementation would relate to software and administrative staff recruitment. Implementation of the European Working Time Directive in Ireland may limit the time available for NCHD's to participate in clinical audit.

Static Stretching Alters Neuromuscular Function and Pacing Strategy, but Not Performance during a 3-Km Running Time-Trial

PubMed Central

Damasceno, Mayara V.; Duarte, Marcos; Pasqua, Leonardo A.; Lima-Silva, Adriano E.; MacIntosh, Brian R.; Bertuzzi, Rômulo

2014-01-01

Purpose Previous studies report that static stretching (SS) impairs running economy. Assuming that pacing strategy relies on rate of energy use, this study aimed to determine whether SS would modify pacing strategy and performance in a 3-km running time-trial. Methods Eleven recreational distance runners performed a) a constant-speed running test without previous SS and a maximal incremental treadmill test; b) an anthropometric assessment and a constant-speed running test with previous SS; c) a 3-km time-trial familiarization on an outdoor 400-m track; d and e) two 3-km time-trials, one with SS (experimental situation) and another without (control situation) previous static stretching. The order of the sessions d and e were randomized in a counterbalanced fashion. Sit-and-reach and drop jump tests were performed before the 3-km running time-trial in the control situation and before and after stretching exercises in the SS. Running economy, stride parameters, and electromyographic activity (EMG) of vastus medialis (VM), biceps femoris (BF) and gastrocnemius medialis (GA) were measured during the constant-speed tests. Results The overall running time did not change with condition (SS 11:35±00:31 s; control 11:28±00:41 s, p = 0.304), but the first 100 m was completed at a significantly lower velocity after SS. Surprisingly, SS did not modify the running economy, but the iEMG for the BF (+22.6%, p = 0.031), stride duration (+2.1%, p = 0.053) and range of motion (+11.1%, p = 0.0001) were significantly modified. Drop jump height decreased following SS (−9.2%, p = 0.001). Conclusion Static stretch impaired neuromuscular function, resulting in a slow start during a 3-km running time-trial, thus demonstrating the fundamental role of the neuromuscular system in the self-selected speed during the initial phase of the race. PMID:24905918

Run-time parallelization and scheduling of loops

NASA Technical Reports Server (NTRS)

Saltz, Joel H.; Mirchandaney, Ravi; Crowley, Kay

1991-01-01

Run-time methods are studied to automatically parallelize and schedule iterations of a do loop in certain cases where compile-time information is inadequate. The methods presented involve execution time preprocessing of the loop. At compile-time, these methods set up the framework for performing a loop dependency analysis. At run-time, wavefronts of concurrently executable loop iterations are identified. Using this wavefront information, loop iterations are reordered for increased parallelism. Symbolic transformation rules are used to produce: inspector procedures that perform execution time preprocessing, and executors or transformed versions of source code loop structures. These transformed loop structures carry out the calculations planned in the inspector procedures. Performance results are presented from experiments conducted on the Encore Multimax. These results illustrate that run-time reordering of loop indexes can have a significant impact on performance.

An alternative approach to the Army Physical Fitness Test two-mile run using critical velocity and isoperformance curves.

PubMed

Fukuda, David H; Smith, Abbie E; Kendall, Kristina L; Cramer, Joel T; Stout, Jeffrey R

2012-02-01

The purpose of this study was to evaluate the use of critical velocity (CV) and isoperformance curves as an alternative to the Army Physical Fitness Test (APFT) two-mile running test. Seventy-eight men and women (mean +/- SE; age: 22.1 +/- 0.34 years; VO2(MAX): 46.1 +/- 0.82 mL/kg/min) volunteered to participate in this study. A VO2(MAX) test and four treadmill running bouts to exhaustion at varying intensities were completed. The relationship between total distance and time-to-exhaustion was tracked for each exhaustive run to determine CV and anaerobic running capacity. A VO2(MAX) prediction equation (Coefficient of determination: 0.805; Standard error of the estimate: 3.2377 mL/kg/min) was developed using these variables. Isoperformance curves were constructed for men and women to correspond with two-mile run times from APFT standards. Individual CV and anaerobic running capacity values were plotted and compared to isoperformance curves for APFT 2-mile run scores. Fifty-four individuals were determined to receive passing scores from this assessment. Physiological profiles identified from this procedure can be used to assess specific aerobic or anaerobic training needs. With the use of time-to-exhaustion as opposed to a time-trial format used in the two-mile run test, pacing strategies may be limited. The combination of variables from the CV test and isoperformance curves provides an alternative to standardized time-trial testing.

NSTX-U Advances in Real-Time C++11 on Linux

NASA Astrophysics Data System (ADS)

Erickson, Keith G.

2015-08-01

Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11 standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) will serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.

Comparison of Sprint and Run Times with Performance on the Wingate Anaerobic Test.

ERIC Educational Resources Information Center

Tharp, Gerald D.; And Others

1985-01-01

Male volunteers were studied to examine the relationship between the Wingate Anaerobic Test (WAnT) and sprint-run times and to determine the influence of age and weight. Results indicate the WAnT is a moderate predictor of dash and run times but becomes a stronger predictor when adjusted for body weight. (Author/MT)

12 CFR 1102.306 - Procedures for requesting records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... section; (B) Where the running of such time is suspended for the calculation of a cost estimate for the... section; (C) Where the running of such time is suspended for the payment of fees pursuant to the paragraph... of the invoice. (ix) The time limit for the ASC to respond to a request will not begin to run until...

Acute differences in foot strike and spatiotemporal variables for shod, barefoot or minimalist male runners.

PubMed

McCallion, Ciara; Donne, Bernard; Fleming, Neil; Blanksby, Brian

2014-05-01

This study compared stride length, stride frequency, contact time, flight time and foot-strike patterns (FSP) when running barefoot, and in minimalist and conventional running shoes. Habitually shod male athletes (n = 14; age 25 ± 6 yr; competitive running experience 8 ± 3 yr) completed a randomised order of 6 by 4-min treadmill runs at velocities (V1 and V2) equivalent to 70 and 85% of best 5-km race time, in the three conditions. Synchronous recording of 3-D joint kinematics and ground reaction force data examined spatiotemporal variables and FSP. Most participants adopted a mid-foot strike pattern, regardless of condition. Heel-toe latency was less at V2 than V1 (-6 ± 20 vs. -1 ± 13 ms, p < 0.05), which indicated a velocity related shift towards a more FFS pattern. Stride duration and flight time, when shod and in minimalist footwear, were greater than barefoot (713 ± 48 and 701 ± 49 vs. 679 ± 56 ms, p < 0.001; and 502 ± 45 and 503 ± 41 vs. 488 ±4 9 ms, p < 0.05, respectively). Contact time was significantly longer when running shod than barefoot or in minimalist footwear (211±30 vs. 191 ± 29 ms and 198 ± 33 ms, p < 0.001). When running barefoot, stride frequency was significantly higher (p < 0.001) than in conventional and minimalist footwear (89 ± 7 vs. 85 ± 6 and 86 ± 6 strides·min(-1)). In conclusion, differences in spatiotemporal variables occurred within a single running session, irrespective of barefoot running experience, and, without a detectable change in FSP. Key pointsDifferences in spatiotemporal variables occurred within a single running session, without a change in foot strike pattern.Stride duration and flight time were greater when shod and in minimalist footwear than when barefoot.Stride frequency when barefoot was higher than when shod or in minimalist footwear.Contact time when shod was longer than when barefoot or in minimalist footwear.Spatiotemporal variables when running in minimalist footwear more closely resemble shod than barefoot running.

Acute Differences in Foot Strike and Spatiotemporal Variables for Shod, Barefoot or Minimalist Male Runners

PubMed Central

McCallion, Ciara; Donne, Bernard; Fleming, Neil; Blanksby, Brian

2014-01-01

This study compared stride length, stride frequency, contact time, flight time and foot-strike patterns (FSP) when running barefoot, and in minimalist and conventional running shoes. Habitually shod male athletes (n = 14; age 25 ± 6 yr; competitive running experience 8 ± 3 yr) completed a randomised order of 6 by 4-min treadmill runs at velocities (V1 and V2) equivalent to 70 and 85% of best 5-km race time, in the three conditions. Synchronous recording of 3-D joint kinematics and ground reaction force data examined spatiotemporal variables and FSP. Most participants adopted a mid-foot strike pattern, regardless of condition. Heel-toe latency was less at V2 than V1 (-6 ± 20 vs. -1 ± 13 ms, p < 0.05), which indicated a velocity related shift towards a more FFS pattern. Stride duration and flight time, when shod and in minimalist footwear, were greater than barefoot (713 ± 48 and 701 ± 49 vs. 679 ± 56 ms, p < 0.001; and 502 ± 45 and 503 ± 41 vs. 488 ±4 9 ms, p < 0.05, respectively). Contact time was significantly longer when running shod than barefoot or in minimalist footwear (211±30 vs. 191 ± 29 ms and 198 ± 33 ms, p < 0.001). When running barefoot, stride frequency was significantly higher (p < 0.001) than in conventional and minimalist footwear (89 ± 7 vs. 85 ± 6 and 86 ± 6 strides·min-1). In conclusion, differences in spatiotemporal variables occurred within a single running session, irrespective of barefoot running experience, and, without a detectable change in FSP. Key points Differences in spatiotemporal variables occurred within a single running session, without a change in foot strike pattern. Stride duration and flight time were greater when shod and in minimalist footwear than when barefoot. Stride frequency when barefoot was higher than when shod or in minimalist footwear. Contact time when shod was longer than when barefoot or in minimalist footwear. Spatiotemporal variables when running in minimalist footwear more closely resemble shod than barefoot running. PMID:24790480

The 6-minute walk test, motor function measure and quantitative thigh muscle MRI in Becker muscular dystrophy: A cross-sectional study.

PubMed

Fischer, Dirk; Hafner, Patricia; Rubino, Daniela; Schmid, Maurice; Neuhaus, Cornelia; Jung, Hans; Bieri, Oliver; Haas, Tanja; Gloor, Monika; Fischmann, Arne; Bonati, Ulrike

2016-07-01

Becker muscular dystrophy (BMD) has an incidence of 1 in 16 000 male births. This cross-sectional study investigated the relation between validated functional scores and quantitative MRI (qMRI) of thigh muscles in 20 ambulatory BMD patients, aged 18.3-60 years (mean 31.2; SD 11.1). Clinical assessments included the motor function measure (MFM) and its subscales, as well as timed function tests such as the 6-minute walk test (6MWT) and the timed 10-m run/walk test. Quantitative MRI of the thigh muscles included the mean fat fraction (MFF) using a 2-point Dixon (2-PD) technique, and transverse relaxation time (T2) measurements. The mean MFM value was 80.4%, SD 9.44 and the D1 subscore 54.5%, SD 19.9. The median 6MWT was 195m, IQR 160-330.2. The median 10-m run/walk test was 7.4 seconds, IQR 6.1-9.3. The mean fat fraction of the thigh muscles was 55.6%, SD 17.4%, mean T2 relaxation times of all muscles: 69.9 ms, SD 14.4. The flexors had the highest MFF and T2 relaxation times, followed by the extensors and the adductors. MFF and global T2 relaxation times were highly negatively correlated with the MFM total, D1-subscore and 6MWT, and positively correlated with the 10 m run/walk test time (p < 0.01). Age was not correlated with MFF, global T2 relaxation time or clinical assessments. Both MFF and T2 measures in the thigh muscle were well correlated with clinical function in BMD and may serve as a surrogate outcome measure in clinical trials. Copyright © 2016 Elsevier B.V. All rights reserved.

The NLstart2run study: Training-related factors associated with running-related injuries in novice runners.

PubMed

Kluitenberg, Bas; van der Worp, Henk; Huisstede, Bionka M A; Hartgens, Fred; Diercks, Ron; Verhagen, Evert; van Middelkoop, Marienke

2016-08-01

The incidence of running-related injuries is high. Some risk factors for injury were identified in novice runners, however, not much is known about the effect of training factors on injury risk. Therefore, the purpose of this study was to examine the associations between training factors and running-related injuries in novice runners, taking the time varying nature of these training-related factors into account. Prospective cohort study. 1696 participants completed weekly diaries on running exposure and injuries during a 6-week running program for novice runners. Total running volume (min), frequency and mean intensity (Rate of Perceived Exertion) were calculated for the seven days prior to each training session. The association of these time-varying variables with injury was determined in an extended Cox regression analysis. The results of the multivariable analysis showed that running with a higher intensity in the previous week was associated with a higher injury risk. Running frequency was not significantly associated with injury, however a trend towards running three times per week being more hazardous than two times could be observed. Finally, lower running volume was associated with a higher risk of sustaining an injury. These results suggest that running more than 60min at a lower intensity is least injurious. This finding is contrary to our expectations and is presumably the result of other factors. Therefore, the findings should not be used plainly as a guideline for novices. More research is needed to establish the person-specific training patterns that are associated with injury. Copyright © 2015 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Analyzing large scale genomic data on the cloud with Sparkhit

PubMed Central

Huang, Liren; Krüger, Jan

2018-01-01

Abstract Motivation The increasing amount of next-generation sequencing data poses a fundamental challenge on large scale genomic analytics. Existing tools use different distributed computational platforms to scale-out bioinformatics workloads. However, the scalability of these tools is not efficient. Moreover, they have heavy run time overheads when pre-processing large amounts of data. To address these limitations, we have developed Sparkhit: a distributed bioinformatics framework built on top of the Apache Spark platform. Results Sparkhit integrates a variety of analytical methods. It is implemented in the Spark extended MapReduce model. It runs 92–157 times faster than MetaSpark on metagenomic fragment recruitment and 18–32 times faster than Crossbow on data pre-processing. We analyzed 100 terabytes of data across four genomic projects in the cloud in 21 h, which includes the run times of cluster deployment and data downloading. Furthermore, our application on the entire Human Microbiome Project shotgun sequencing data was completed in 2 h, presenting an approach to easily associate large amounts of public datasets with reference data. Availability and implementation Sparkhit is freely available at: https://rhinempi.github.io/sparkhit/. Contact asczyrba@cebitec.uni-bielefeld.de Supplementary information Supplementary data are available at Bioinformatics online. PMID:29253074

Walking, running, and resting under time, distance, and average speed constraints: optimality of walk-run-rest mixtures.

PubMed

Long, Leroy L; Srinivasan, Manoj

2013-04-06

On a treadmill, humans switch from walking to running beyond a characteristic transition speed. Here, we study human choice between walking and running in a more ecological (non-treadmill) setting. We asked subjects to travel a given distance overground in a given allowed time duration. During this task, the subjects carried, and could look at, a stopwatch that counted down to zero. As expected, if the total time available were large, humans walk the whole distance. If the time available were small, humans mostly run. For an intermediate total time, humans often use a mixture of walking at a slow speed and running at a higher speed. With analytical and computational optimization, we show that using a walk-run mixture at intermediate speeds and a walk-rest mixture at the lowest average speeds is predicted by metabolic energy minimization, even with costs for transients-a consequence of non-convex energy curves. Thus, sometimes, steady locomotion may not be energy optimal, and not preferred, even in the absence of fatigue. Assuming similar non-convex energy curves, we conjecture that similar walk-run mixtures may be energetically beneficial to children following a parent and animals on long leashes. Humans and other animals might also benefit energetically from alternating between moving forward and standing still on a slow and sufficiently long treadmill.

Transient dynamics capability at Sandia National Laboratories

NASA Technical Reports Server (NTRS)

Attaway, Steven W.; Biffle, Johnny H.; Sjaardema, G. D.; Heinstein, M. W.; Schoof, L. A.

1993-01-01

A brief overview of the transient dynamics capabilities at Sandia National Laboratories, with an emphasis on recent new developments and current research is presented. In addition, the Sandia National Laboratories (SNL) Engineering Analysis Code Access System (SEACAS), which is a collection of structural and thermal codes and utilities used by analysts at SNL, is described. The SEACAS system includes pre- and post-processing codes, analysis codes, database translation codes, support libraries, Unix shell scripts for execution, and an installation system. SEACAS is used at SNL on a daily basis as a production, research, and development system for the engineering analysts and code developers. Over the past year, approximately 190 days of CPU time were used by SEACAS codes on jobs running from a few seconds up to two and one-half days of CPU time. SEACAS is running on several different systems at SNL including Cray Unicos, Hewlett Packard PH-UX, Digital Equipment Ultrix, and Sun SunOS. An overview of SEACAS, including a short description of the codes in the system, are presented. Abstracts and references for the codes are listed at the end of the report.

Major and Minor League Baseball Hamstring Injuries: Epidemiologic Findings From the Major League Baseball Injury Surveillance System.

PubMed

Ahmad, Christopher S; Dick, Randall W; Snell, Edward; Kenney, Nick D; Curriero, Frank C; Pollack, Keshia; Albright, John P; Mandelbaum, Bert R

2014-06-01

Hamstring strains are a recognized cause of disability for athletes in many sports, but no study exists that reports the incidence and circumstances surrounding these injuries in professional baseball. Professional baseball players have a high incidence of hamstring strains, and these injuries are influenced by multiple factors including history of hamstring injury, time period within the season, and activity of base running. Descriptive epidemiologic study. For the 2011 season, injury data were prospectively collected for every Major League Baseball (MLB) major and minor league team and recorded in the MLB's Injury Surveillance System. Data collected for this study included date of injury, activity in which the player was engaged at the time of injury, and time loss. Injury rates were reported in injuries per athlete-exposure (A-E). Athlete-exposures were defined as the average number of players on a team who were participating in a game multiplied by the number of games. In the major leagues, 50 hamstring strains were reported for an injury rate (IR) of 0.7 per 1000 A-Es and averaged 24 days missed. In the minor leagues, 218 hamstring strains were reported for an IR of 0.7 per 1000 A-Es and averaged 27 days missed. Base running, specifically running to first base, was the top activity for sustaining a hamstring strain in both major and minor leagues, associated with almost two-thirds of hamstring strains. Approximately two-thirds of these injuries in both the major and minor leagues resulted in more than 7 days of time loss. Approximately 25% of these injuries kept the player out for 1 month or longer. History of a previous hamstring strain in the prior year, 2010, was found in 20% of the major league players and 8% of the minor league players. In the major leagues, the month of May had a statistically significant higher frequency of hamstring injuries than any other month in the season (P = .0153). Hamstring strains are a considerable cause of disability in professional baseball and are affected by history of hamstring strain, seasonal timing, and running to first base. © 2014 The Author(s).

Multidisciplinary Simulation Acceleration using Multiple Shared-Memory Graphical Processing Units

NASA Astrophysics Data System (ADS)

Kemal, Jonathan Yashar

For purposes of optimizing and analyzing turbomachinery and other designs, the unsteady Favre-averaged flow-field differential equations for an ideal compressible gas can be solved in conjunction with the heat conduction equation. We solve all equations using the finite-volume multiple-grid numerical technique, with the dual time-step scheme used for unsteady simulations. Our numerical solver code targets CUDA-capable Graphical Processing Units (GPUs) produced by NVIDIA. Making use of MPI, our solver can run across networked compute notes, where each MPI process can use either a GPU or a Central Processing Unit (CPU) core for primary solver calculations. We use NVIDIA Tesla C2050/C2070 GPUs based on the Fermi architecture, and compare our resulting performance against Intel Zeon X5690 CPUs. Solver routines converted to CUDA typically run about 10 times faster on a GPU for sufficiently dense computational grids. We used a conjugate cylinder computational grid and ran a turbulent steady flow simulation using 4 increasingly dense computational grids. Our densest computational grid is divided into 13 blocks each containing 1033x1033 grid points, for a total of 13.87 million grid points or 1.07 million grid points per domain block. To obtain overall speedups, we compare the execution time of the solver's iteration loop, including all resource intensive GPU-related memory copies. Comparing the performance of 8 GPUs to that of 8 CPUs, we obtain an overall speedup of about 6.0 when using our densest computational grid. This amounts to an 8-GPU simulation running about 39.5 times faster than running than a single-CPU simulation.

Reducing the worst case running times of a family of RNA and CFG problems, using Valiant's approach.

PubMed

Zakov, Shay; Tsur, Dekel; Ziv-Ukelson, Michal

2011-08-18

RNA secondary structure prediction is a mainstream bioinformatic domain, and is key to computational analysis of functional RNA. In more than 30 years, much research has been devoted to defining different variants of RNA structure prediction problems, and to developing techniques for improving prediction quality. Nevertheless, most of the algorithms in this field follow a similar dynamic programming approach as that presented by Nussinov and Jacobson in the late 70's, which typically yields cubic worst case running time algorithms. Recently, some algorithmic approaches were applied to improve the complexity of these algorithms, motivated by new discoveries in the RNA domain and by the need to efficiently analyze the increasing amount of accumulated genome-wide data. We study Valiant's classical algorithm for Context Free Grammar recognition in sub-cubic time, and extract features that are common to problems on which Valiant's approach can be applied. Based on this, we describe several problem templates, and formulate generic algorithms that use Valiant's technique and can be applied to all problems which abide by these templates, including many problems within the world of RNA Secondary Structures and Context Free Grammars. The algorithms presented in this paper improve the theoretical asymptotic worst case running time bounds for a large family of important problems. It is also possible that the suggested techniques could be applied to yield a practical speedup for these problems. For some of the problems (such as computing the RNA partition function and base-pair binding probabilities), the presented techniques are the only ones which are currently known for reducing the asymptotic running time bounds of the standard algorithms.

Reducing the worst case running times of a family of RNA and CFG problems, using Valiant's approach

PubMed Central

2011-01-01

Background RNA secondary structure prediction is a mainstream bioinformatic domain, and is key to computational analysis of functional RNA. In more than 30 years, much research has been devoted to defining different variants of RNA structure prediction problems, and to developing techniques for improving prediction quality. Nevertheless, most of the algorithms in this field follow a similar dynamic programming approach as that presented by Nussinov and Jacobson in the late 70's, which typically yields cubic worst case running time algorithms. Recently, some algorithmic approaches were applied to improve the complexity of these algorithms, motivated by new discoveries in the RNA domain and by the need to efficiently analyze the increasing amount of accumulated genome-wide data. Results We study Valiant's classical algorithm for Context Free Grammar recognition in sub-cubic time, and extract features that are common to problems on which Valiant's approach can be applied. Based on this, we describe several problem templates, and formulate generic algorithms that use Valiant's technique and can be applied to all problems which abide by these templates, including many problems within the world of RNA Secondary Structures and Context Free Grammars. Conclusions The algorithms presented in this paper improve the theoretical asymptotic worst case running time bounds for a large family of important problems. It is also possible that the suggested techniques could be applied to yield a practical speedup for these problems. For some of the problems (such as computing the RNA partition function and base-pair binding probabilities), the presented techniques are the only ones which are currently known for reducing the asymptotic running time bounds of the standard algorithms. PMID:21851589

Comparison of Four Precipitation Forcing Datasets in Land Information System Simulations over the Continental U.S.

NASA Technical Reports Server (NTRS)

Case, Jonathan L.; Kumar, Sujay V.; Kuligowski, Robert J.; Langston, Carrie

2013-01-01

The NASA Short ]term Prediction Research and Transition (SPoRT) Center in Huntsville, AL is running a real ]time configuration of the NASA Land Information System (LIS) with the Noah land surface model (LSM). Output from the SPoRT ]LIS run is used to initialize land surface variables for local modeling applications at select National Weather Service (NWS) partner offices, and can be displayed in decision support systems for situational awareness and drought monitoring. The SPoRT ]LIS is run over a domain covering the southern and eastern United States, fully nested within the National Centers for Environmental Prediction Stage IV precipitation analysis grid, which provides precipitation forcing to the offline LIS ]Noah runs. The SPoRT Center seeks to expand the real ]time LIS domain to the entire Continental U.S. (CONUS); however, geographical limitations with the Stage IV analysis product have inhibited this expansion. Therefore, a goal of this study is to test alternative precipitation forcing datasets that can enable the LIS expansion by improving upon the current geographical limitations of the Stage IV product. The four precipitation forcing datasets that are inter ]compared on a 4 ]km resolution CONUS domain include the Stage IV, an experimental GOES quantitative precipitation estimate (QPE) from NESDIS/STAR, the National Mosaic and QPE (NMQ) product from the National Severe Storms Laboratory, and the North American Land Data Assimilation System phase 2 (NLDAS ]2) analyses. The NLDAS ]2 dataset is used as the control run, with each of the other three datasets considered experimental runs compared against the control. The regional strengths, weaknesses, and biases of each precipitation analysis are identified relative to the NLDAS ]2 control in terms of accumulated precipitation pattern and amount, and the impacts on the subsequent LSM spin ]up simulations. The ultimate goal is to identify an alternative precipitation forcing dataset that can best support an expansion of the real ]time SPoRT ]LIS to a domain covering the entire CONUS.

Prototype methodology for obtaining cloud seeding guidance from HRRR model data

NASA Astrophysics Data System (ADS)

Dawson, N.; Blestrud, D.; Kunkel, M. L.; Waller, B.; Ceratto, J.

2017-12-01

Weather model data, along with real time observations, are critical to determine whether atmospheric conditions are prime for super-cooled liquid water during cloud seeding operations. Cloud seeding groups can either use operational forecast models, or run their own model on a computer cluster. A custom weather model provides the most flexibility, but is also expensive. For programs with smaller budgets, openly-available operational forecasting models are the de facto method for obtaining forecast data. The new High-Resolution Rapid Refresh (HRRR) model (3 x 3 km grid size), developed by the Earth System Research Laboratory (ESRL), provides hourly model runs with 18 forecast hours per run. While the model cannot be fine-tuned for a specific area or edited to provide cloud-seeding-specific output, model output is openly available on a near-real-time basis. This presentation focuses on a prototype methodology for using HRRR model data to create maps which aid in near-real-time cloud seeding decision making. The R programming language is utilized to run a script on a Windows® desktop/laptop computer either on a schedule (such as every half hour) or manually. The latest HRRR model run is downloaded from NOAA's Operational Model Archive and Distribution System (NOMADS). A GRIB-filter service, provided by NOMADS, is used to obtain surface and mandatory pressure level data for a subset domain which greatly cuts down on the amount of data transfer. Then, a set of criteria, identified by the Idaho Power Atmospheric Science Group, is used to create guidance maps. These criteria include atmospheric stability (lapse rates), dew point depression, air temperature, and wet bulb temperature. The maps highlight potential areas where super-cooled liquid water may exist, reasons as to why cloud seeding should not be attempted, and wind speed at flight level.

MESAFace, a graphical interface to analyze the MESA output

NASA Astrophysics Data System (ADS)

Giannotti, M.; Wise, M.; Mohammed, A.

2013-04-01

MESA (Modules for Experiments in Stellar Astrophysics) has become very popular among astrophysicists as a powerful and reliable code to simulate stellar evolution. Analyzing the output data thoroughly may, however, present some challenges and be rather time-consuming. Here we describe MESAFace, a graphical and dynamical interface which provides an intuitive, efficient and quick way to analyze the MESA output. Catalogue identifier: AEOQ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOQ_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 19165 No. of bytes in distributed program, including test data, etc.: 6300592 Distribution format: tar.gz Programming language: Mathematica. Computer: Any computer capable of running Mathematica. Operating system: Any capable of running Mathematica. Tested on Linux, Mac, Windows XP, Windows 7. RAM: Recommended 2 Gigabytes or more. Supplementary material: Additional test data files are available. Classification: 1.7, 14. Nature of problem: Find a way to quickly and thoroughly analyze the output of a MESA run, including all the profiles, and have an efficient method to produce graphical representations of the data. Solution method: We created two scripts (to be run consecutively). The first one downloads all the data from a MESA run and organizes the profiles in order of age. All the files are saved as tables or arrays of tables which can then be accessed very quickly by Mathematica. The second script uses the Manipulate function to create a graphical interface which allows the user to choose what to plot from a set of menus and buttons. The information shown is updated in real time. The user can access very quickly all the data from the run under examination and visualize it with plots and tables. Unusual features: Moving the slides in certain regions may cause an error message. This happens when Mathematica is asked to read nonexistent data. The error message, however, disappears when the slides are moved back. This issue does not preclude the good functioning of the interface. Additional comments: The program uses the dynamical capabilities of Mathematica. When the program is opened, Mathematica prompts the user to “Enable Dynamics”. It is necessary to accept before proceeding. Running time: Depends on the size of the data downloaded, on where the data are stored (hard-drive or web), and on the speed of the computer or network connection. In general, downloading the data may take from a minute to several minutes. Loading directly from the web is slower. For example, downloading a 200 MB data folder (a total of 102 files) with a dual-core Intel laptop, P8700, 2 GB of RAM, at 2.53 GHz took about a minute from the hard-drive and about 23 min from the web (with a basic home wireless connection).

A Monotonic Degradation Assessment Index of Rolling Bearings Using Fuzzy Support Vector Data Description and Running Time

PubMed Central

Shen, Zhongjie; He, Zhengjia; Chen, Xuefeng; Sun, Chuang; Liu, Zhiwen

2012-01-01

Performance degradation assessment based on condition monitoring plays an important role in ensuring reliable operation of equipment, reducing production downtime and saving maintenance costs, yet performance degradation has strong fuzziness, and the dynamic information is random and fuzzy, making it a challenge how to assess the fuzzy bearing performance degradation. This study proposes a monotonic degradation assessment index of rolling bearings using fuzzy support vector data description (FSVDD) and running time. FSVDD constructs the fuzzy-monitoring coefficient ε̄ which is sensitive to the initial defect and stably increases as faults develop. Moreover, the parameter ε̄ describes the accelerating relationships between the damage development and running time. However, the index ε̄ with an oscillating trend disagrees with the irreversible damage development. The running time is introduced to form a monotonic index, namely damage severity index (DSI). DSI inherits all advantages of ε̄ and overcomes its disadvantage. A run-to-failure test is carried out to validate the performance of the proposed method. The results show that DSI reflects the growth of the damages with running time perfectly. PMID:23112591

A monotonic degradation assessment index of rolling bearings using fuzzy support vector data description and running time.

PubMed

Shen, Zhongjie; He, Zhengjia; Chen, Xuefeng; Sun, Chuang; Liu, Zhiwen

2012-01-01

Performance degradation assessment based on condition monitoring plays an important role in ensuring reliable operation of equipment, reducing production downtime and saving maintenance costs, yet performance degradation has strong fuzziness, and the dynamic information is random and fuzzy, making it a challenge how to assess the fuzzy bearing performance degradation. This study proposes a monotonic degradation assessment index of rolling bearings using fuzzy support vector data description (FSVDD) and running time. FSVDD constructs the fuzzy-monitoring coefficient ε⁻ which is sensitive to the initial defect and stably increases as faults develop. Moreover, the parameter ε⁻ describes the accelerating relationships between the damage development and running time. However, the index ε⁻ with an oscillating trend disagrees with the irreversible damage development. The running time is introduced to form a monotonic index, namely damage severity index (DSI). DSI inherits all advantages of ε⁻ and overcomes its disadvantage. A run-to-failure test is carried out to validate the performance of the proposed method. The results show that DSI reflects the growth of the damages with running time perfectly.

Addressing Thermal Model Run Time Concerns of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA)

NASA Technical Reports Server (NTRS)

Peabody, Hume; Guerrero, Sergio; Hawk, John; Rodriguez, Juan; McDonald, Carson; Jackson, Cliff

2016-01-01

The Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) utilizes an existing 2.4 m diameter Hubble sized telescope donated from elsewhere in the federal government for near-infrared sky surveys and Exoplanet searches to answer crucial questions about the universe and dark energy. The WFIRST design continues to increase in maturity, detail, and complexity with each design cycle leading to a Mission Concept Review and entrance to the Mission Formulation Phase. Each cycle has required a Structural-Thermal-Optical-Performance (STOP) analysis to ensure the design can meet the stringent pointing and stability requirements. As such, the models have also grown in size and complexity leading to increased model run time. This paper addresses efforts to reduce the run time while still maintaining sufficient accuracy for STOP analyses. A technique was developed to identify slews between observing orientations that were sufficiently different to warrant recalculation of the environmental fluxes to reduce the total number of radiation calculation points. The inclusion of a cryocooler fluid loop in the model also forced smaller time-steps than desired, which greatly increases the overall run time. The analysis of this fluid model required mitigation to drive the run time down by solving portions of the model at different time scales. Lastly, investigations were made into the impact of the removal of small radiation couplings on run time and accuracy. Use of these techniques allowed the models to produce meaningful results within reasonable run times to meet project schedule deadlines.

Running away experience and psychoactive substance use among adolescents in Taiwan: multi-city street outreach survey.

PubMed

Wang, Shi-Heng; Chen, Wen-Chun; Lew-Ting, Chih-Yin; Chen, Chuan-Yu; Chen, Wei J

2010-01-20

This study aimed to examine: 1) the relationship between being a runaway and the time since the first absconding event and adolescent substance use; 2) whether different kinds of psychoactive substances have a different temporal relationship to the first absconding event; and 3) whether the various reasons for the first absconding event are associated with different risks of substance use. Participants were drawn from the 2004-2006 nationwide outreach programs across 26 cities/towns in Taiwan. A total of 17,133 participants, age 12-18 years, who completed an anonymous questionnaire on their experience of running away and substances use and who were now living with their families, were included in the analysis. The lifetime risk of tobacco, alcohol, betel nut, and illegal drug/inhalant use increased steadily from adolescents who had experienced a trial runaway episode (one time lasting or= 2 times or lasting > 1 day), when compared to those who had never ran away. Adolescents who had their first running away experience > 6 months previously had a greater risk of betel nut or illegal drug/inhalant use over the past 6-months than those with a similar experience within the last 6 months. Both alcohol and tobacco use were most frequently initiated before the first running away, whereas both betel nut and illegal drug/inhalant use were most frequently initiated after this event. When adolescents who were fleeing an unsatisfactory home life were compared to those who ran away for excitement, the risk of alcohol use was similar but the former tended to have a higher risk of tobacco, betel nut, and illegal drug/inhalant use. More significant running away and a longer time since the first absconding experience were associated with more advanced substance involvement among adolescents now living in a family setting. Once adolescents had left home, they developed additional psychoactive substance problems, regardless of their reasons for running away. These findings have implications for caregivers, teachers, and healthcare workers when trying to prevent and/or intervening in adolescent substance use.

77 FR 50198 - Self-Regulatory Organizations; The Fixed Income Clearing Corporation; Notice of Filing Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-20

... Time at Which the Mortgage-Backed Securities Division Runs Its Daily Morning Pass August 14, 2012... Division (``MBSD'') runs its first processing pass of the day from 2 p.m. to 4 p.m. Eastern Standard Time... MBSD intends to move the time at which it runs its first processing pass of the day (historically...

Towards Run-time Assurance of Advanced Propulsion Algorithms

NASA Technical Reports Server (NTRS)

Wong, Edmond; Schierman, John D.; Schlapkohl, Thomas; Chicatelli, Amy

2014-01-01

This paper covers the motivation and rationale for investigating the application of run-time assurance methods as a potential means of providing safety assurance for advanced propulsion control systems. Certification is becoming increasingly infeasible for such systems using current verification practices. Run-time assurance systems hold the promise of certifying these advanced systems by continuously monitoring the state of the feedback system during operation and reverting to a simpler, certified system if anomalous behavior is detected. The discussion will also cover initial efforts underway to apply a run-time assurance framework to NASA's model-based engine control approach. Preliminary experimental results are presented and discussed.

PCLIPS: Parallel CLIPS

NASA Technical Reports Server (NTRS)

Hall, Lawrence O.; Bennett, Bonnie H.; Tello, Ivan

1994-01-01

A parallel version of CLIPS 5.1 has been developed to run on Intel Hypercubes. The user interface is the same as that for CLIPS with some added commands to allow for parallel calls. A complete version of CLIPS runs on each node of the hypercube. The system has been instrumented to display the time spent in the match, recognize, and act cycles on each node. Only rule-level parallelism is supported. Parallel commands enable the assertion and retraction of facts to/from remote nodes working memory. Parallel CLIPS was used to implement a knowledge-based command, control, communications, and intelligence (C(sup 3)I) system to demonstrate the fusion of high-level, disparate sources. We discuss the nature of the information fusion problem, our approach, and implementation. Parallel CLIPS has also be used to run several benchmark parallel knowledge bases such as one to set up a cafeteria. Results show from running Parallel CLIPS with parallel knowledge base partitions indicate that significant speed increases, including superlinear in some cases, are possible.

Implementation of a multi-threaded framework for large-scale scientific applications

DOE PAGES

Sexton-Kennedy, E.; Gartung, Patrick; Jones, C. D.; ...

2015-05-22

The CMS experiment has recently completed the development of a multi-threaded capable application framework. In this paper, we will discuss the design, implementation and application of this framework to production applications in CMS. For the 2015 LHC run, this functionality is particularly critical for both our online and offline production applications, which depend on faster turn-around times and a reduced memory footprint relative to before. These applications are complex codes, each including a large number of physics-driven algorithms. While the framework is capable of running a mix of thread-safe and 'legacy' modules, algorithms running in our production applications need tomore » be thread-safe for optimal use of this multi-threaded framework at a large scale. Towards this end, we discuss the types of changes, which were necessary for our algorithms to achieve good performance of our multithreaded applications in a full-scale application. Lastly performance numbers for what has been achieved for the 2015 run are presented.« less

Factors affecting the energy cost of level running at submaximal speed.

PubMed

Lacour, Jean-René; Bourdin, Muriel

2015-04-01

Metabolic measurement is still the criterion for investigation of the efficiency of mechanical work and for analysis of endurance performance in running. Metabolic demand may be expressed either as the energy spent per unit distance (energy cost of running, C r) or as energy demand at a given running speed (running economy). Systematic studies showed a range of costs of about 20 % between runners. Factors affecting C r include body dimensions: body mass and leg architecture, mostly calcaneal tuberosity length, responsible for 60-80 % of the variability. Children show a higher C r than adults. Higher resting metabolism and lower leg length/stature ratio are the main putative factors responsible for the difference. Elastic energy storage and reuse also contribute to the variability of C r. The increase in C r with increasing running speed due to increase in mechanical work is blunted till 6-7 m s(-1) by the increase in vertical stiffness and the decrease in ground contact time. Fatigue induced by prolonged or intense running is associated with up to 10 % increased C r; the contribution of metabolic and biomechanical factors remains unclear. Women show a C r similar to men of similar body mass, despite differences in gait pattern. The superiority of black African runners is presumably related to their leg architecture and better elastic energy storage and reuse.

High- compared to low-arched athletes exhibit smaller knee abduction moments in walking and running.

PubMed

Powell, Douglas W; Andrews, Samantha; Stickley, Cris; Williams, D S Blaise

2016-12-01

High- (HA) and low-arched athletes (LA) experience distinct injury patterns. These injuries are the result of the interaction of structure and biomechanics. A suggested mechanism of patellofemoral pain pertains to frontal plane knee moments which may be exaggerated in LA athletes. We hypothesize that LA athletes will exhibit greater peak knee abduction moments than high-arched athletes. Twenty healthy female recreational athletes (10HA and 10LA) performed five over-ground barefoot walking and five barefoot running trials at a self-selected velocity while three-dimensional kinematics and ground reaction forces were recorded. Peak knee abduction moments and time-to-peak knee abduction moments were calculated using Visual 3D. High-arched athletes had smaller peak knee abduction moments compared to low-arched athletes during walking (KAM1: p=0.019; KAM2: p=0.015) and running (p=0.010). No differences were observed in time-to-peak knee abduction moment during walking (KAM1: p=0.360; KAM2: p=0.085) or running (p=0.359). These findings demonstrate that foot type is associated with altered frontal plane knee kinetics which may contribute to patellofemoral pain. Future research should address the efficacy of clinical interventions including orthotics and rehabilitation programs in these athletes. Copyright © 2016 Elsevier B.V. All rights reserved.

Robust H∞ control of active vehicle suspension under non-stationary running

NASA Astrophysics Data System (ADS)

Guo, Li-Xin; Zhang, Li-Ping

2012-12-01

Due to complexity of the controlled objects, the selection of control strategies and algorithms in vehicle control system designs is an important task. Moreover, the control problem of automobile active suspensions has been become one of the important relevant investigations due to the constrained peculiarity and parameter uncertainty of mathematical models. In this study, after establishing the non-stationary road surface excitation model, a study on the active suspension control for non-stationary running condition was conducted using robust H∞ control and linear matrix inequality optimization. The dynamic equation of a two-degree-of-freedom quarter car model with parameter uncertainty was derived. The H∞ state feedback control strategy with time-domain hard constraints was proposed, and then was used to design the active suspension control system of the quarter car model. Time-domain analysis and parameter robustness analysis were carried out to evaluate the proposed controller stability. Simulation results show that the proposed control strategy has high systemic stability on the condition of non-stationary running and parameter uncertainty (including suspension mass, suspension stiffness and tire stiffness). The proposed control strategy can achieve a promising improvement on ride comfort and satisfy the requirements of dynamic suspension deflection, dynamic tire loads and required control forces within given constraints, as well as non-stationary running condition.

Smap Soil Moisture Data Assimilation for the Continental United States and Eastern Africa

NASA Astrophysics Data System (ADS)

Blankenship, C. B.; Case, J.; Zavodsky, B.; Crosson, W. L.

2016-12-01

The NASA Short-Term Prediction Research and Transition (SPoRT) Center at Marshall Space Flight Center manages near-real-time runs of the Noah Land Surface Model within the NASA Land Information System (LIS) over Continental U.S. (CONUS) and Eastern Africa domains. Soil moisture products from the CONUS model run are used by several NOAA/National Weather Service Weather Forecast Offices for flood and drought situational awareness. The baseline LIS configuration is the Noah model driven by atmospheric and combined radar/gauge precipitation analyses, and input satellite-derived real-time green vegetation fraction on a 3-km grid for the CONUS. This configuration is being enhanced by adding the assimilation of Level 2 Soil Moisture Active/Passive (SMAP) soil moisture retrievals in a parallel run beginning on 1 April 2015. Our implementation of SMAP assimilation includes a cumulative distribution function (CDF) matching approach that aggregates points with similar soil types. This method allows creation of robust CDFs with a short data record, and also permits the correction of local anomalies that may arise from poor forcing data (e.g., quality-control problems with rain gauges). Validation results using in situ soil monitoring networks in the CONUS are shown, with comparisons to the baseline SPoRT-LIS run. Initial results are also presented from a modeling run in eastern Africa, forced by Integrated Multi-satellitE Retrievals for GPM (IMERG) precipitation data. Strategies for spatial downscaling and for dealing with effective depth of the retrieval product are also discussed.

14 CFR 25.113 - Takeoff distance and takeoff run.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Takeoff distance and takeoff run. 25.113... and takeoff run. (a) Takeoff distance on a dry runway is the greater of— (1) The horizontal distance... include a clearway, the takeoff run is equal to the takeoff distance. If the takeoff distance includes a...

14 CFR 25.113 - Takeoff distance and takeoff run.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Takeoff distance and takeoff run. 25.113... and takeoff run. (a) Takeoff distance on a dry runway is the greater of— (1) The horizontal distance... include a clearway, the takeoff run is equal to the takeoff distance. If the takeoff distance includes a...

Quantitative Assessment of the CCMC's Experimental Real-time SWMF-Geospace Results

NASA Astrophysics Data System (ADS)

Liemohn, Michael; Ganushkina, Natalia; De Zeeuw, Darren; Welling, Daniel; Toth, Gabor; Ilie, Raluca; Gombosi, Tamas; van der Holst, Bart; Kuznetsova, Maria; Maddox, Marlo; Rastaetter, Lutz

2016-04-01

Experimental real-time simulations of the Space Weather Modeling Framework (SWMF) are conducted at the Community Coordinated Modeling Center (CCMC), with results available there (http://ccmc.gsfc.nasa.gov/realtime.php), through the CCMC Integrated Space Weather Analysis (iSWA) site (http://iswa.ccmc.gsfc.nasa.gov/IswaSystemWebApp/), and the Michigan SWMF site (http://csem.engin.umich.edu/realtime). Presently, two configurations of the SWMF are running in real time at CCMC, both focusing on the geospace modules, using the BATS-R-US magnetohydrodynamic model, the Ridley Ionosphere Model, and with and without the Rice Convection Model for inner magnetospheric drift physics. While both have been running for several years, nearly continuous results are available since July 2015. Dst from the model output is compared against the Kyoto real-time Dst, in particular the daily minimum value of Dst to quantify the ability of the model to capture storms. Contingency tables are presented, showing that the run with the inner magnetosphere model is much better at reproducing storm-time values. For disturbances with a minimum Dst lower than -50 nT, this version yields a probability of event detection of 0.86 and a Heidke Skill Score of 0.60. In the other version of the SWMF, without the inner magnetospheric module included, the modeled Dst never dropped below -50 nT during the examined epoch.

40 CFR Table 1b to Subpart Ce of... - Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Defined in § 60...

Code of Federal Regulations, 2011 CFR

2011-07-01

....011) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part... by volume (ppmv) 20 5.5 11 3-run average (1-hour minimum sample time per run) EPA Reference Method 10... dscf) 16 (7.0) or 0.013 (0.0057) 0.85 (0.37) or 0.020 (0.0087) 9.3 (4.1) or 0.054 (0.024) 3-run average...

A comparison of the spatiotemporal parameters, kinematics, and biomechanics between shod, unshod, and minimally supported running as compared to walking.

PubMed

Lohman, Everett B; Balan Sackiriyas, Kanikkai Steni; Swen, R Wesley

2011-11-01

Recreational running has many proven benefits which include increased cardiovascular, physical and mental health. It is no surprise that Running USA reported over 10 million individuals completed running road races in 2009 not to mention recreational joggers who do not wish to compete in organized events. Unfortunately there are numerous risks associated with running, the most common being musculoskeletal injuries attributed to incorrect shoe choice, training errors and excessive shoe wear or other biomechanical factors associated with ground reaction forces. Approximately 65% of chronic injuries in distance runners are related to routine high mileage, rapid increases in mileage, increased intensity, hills or irregular surface running, and surface firmness. Humans have been running barefooted or wearing minimally supportive footwear such as moccasins or sandals since the beginning of time while modernized running shoes were not invented until the 1970s. However, the current trend is that many runners are moving back to barefoot running or running in "minimal" shoes. The goal of this masterclass article is to examine the similarities and differences between shod and unshod (barefoot or minimally supportive running shoes) runners by examining spatiotemporal parameters, energetics, and biomechanics. These running parameters will be compared and contrasted with walking. The most obvious difference between the walking and running gait cycle is the elimination of the double limb support phase of walking gait in exchange for a float (no limb support) phase. The biggest difference between barefoot and shod runners is at the initial contact phase of gait where the barefoot and minimally supported runner initiates contact with their forefoot or midfoot instead of the rearfoot. As movement science experts, physical therapists are often called upon to assess the gait of a running athlete, their choice of footwear, and training regime. With a clearer understanding of running and its complexities, the physical therapist will be able to better identify faults and create informed treatment plans while rehabilitating patients who are experiencing musculoskeletal injuries due to running. Copyright © 2011 Elsevier Ltd. All rights reserved.

Run-time parallelization and scheduling of loops

NASA Technical Reports Server (NTRS)

Saltz, Joel H.; Mirchandaney, Ravi; Crowley, Kay

1990-01-01

Run time methods are studied to automatically parallelize and schedule iterations of a do loop in certain cases, where compile-time information is inadequate. The methods presented involve execution time preprocessing of the loop. At compile-time, these methods set up the framework for performing a loop dependency analysis. At run time, wave fronts of concurrently executable loop iterations are identified. Using this wavefront information, loop iterations are reordered for increased parallelism. Symbolic transformation rules are used to produce: inspector procedures that perform execution time preprocessing and executors or transformed versions of source code loop structures. These transformed loop structures carry out the calculations planned in the inspector procedures. Performance results are presented from experiments conducted on the Encore Multimax. These results illustrate that run time reordering of loop indices can have a significant impact on performance. Furthermore, the overheads associated with this type of reordering are amortized when the loop is executed several times with the same dependency structure.

Build and Execute Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guan, Qiang

At exascale, the challenge becomes to develop applications that run at scale and use exascale platforms reliably, efficiently, and flexibly. Workflows become much more complex because they must seamlessly integrate simulation and data analytics. They must include down-sampling, post-processing, feature extraction, and visualization. Power and data transfer limitations require these analysis tasks to be run in-situ or in-transit. We expect successful workflows will comprise multiple linked simulations along with tens of analysis routines. Users will have limited development time at scale and, therefore, must have rich tools to develop, debug, test, and deploy applications. At this scale, successful workflows willmore » compose linked computations from an assortment of reliable, well-defined computation elements, ones that can come and go as required, based on the needs of the workflow over time. We propose a novel framework that utilizes both virtual machines (VMs) and software containers to create a workflow system that establishes a uniform build and execution environment (BEE) beyond the capabilities of current systems. In this environment, applications will run reliably and repeatably across heterogeneous hardware and software. Containers, both commercial (Docker and Rocket) and open-source (LXC and LXD), define a runtime that isolates all software dependencies from the machine operating system. Workflows may contain multiple containers that run different operating systems, different software, and even different versions of the same software. We will run containers in open-source virtual machines (KVM) and emulators (QEMU) so that workflows run on any machine entirely in user-space. On this platform of containers and virtual machines, we will deliver workflow software that provides services, including repeatable execution, provenance, checkpointing, and future proofing. We will capture provenance about how containers were launched and how they interact to annotate workflows for repeatable and partial re-execution. We will coordinate the physical snapshots of virtual machines with parallel programming constructs, such as barriers, to automate checkpoint and restart. We will also integrate with HPC-specific container runtimes to gain access to accelerators and other specialized hardware to preserve native performance. Containers will link development to continuous integration. When application developers check code in, it will automatically be tested on a suite of different software and hardware architectures.« less

Relationship between Achilles tendon length and running performance in well-trained male endurance runners.

PubMed

Ueno, Hiromasa; Suga, Tadashi; Takao, Kenji; Tanaka, Takahiro; Misaki, Jun; Miyake, Yuto; Nagano, Akinori; Isaka, Tadao

2018-02-01

This study aimed to determine the relationship between Achilles tendon (AT) length and running performance, including running economy, in well-trained endurance runners. We also examined the reasonable portion of the AT related to running performance among AT lengths measured in three different portions. The AT lengths at three portions and cross-sectional area (CSA) of 30 endurance runners were measured using magnetic resonance imaging. Each AT length was calculated as the distance from the calcaneal tuberosity to the muscle-tendon junction of the soleus, gastrocnemius medialis (GM AT ), and gastrocnemius lateralis, respectively. These AT lengths were normalized with shank length. The AT CSA was calculated as the average of 10, 20, and 30 mm above the distal insertion of the AT and normalized with body mass. Running economy was evaluated by measuring energy cost during three 4-minutes submaximal treadmill running trials at 14, 16, and 18 km/h, respectively. Among three AT lengths, only a GM AT correlated significantly with personal best 5000-m race time (r=-.376, P=.046). Furthermore, GM AT correlated significantly with energy cost during submaximal treadmill running trials at 14 km/h and 18 km/h (r=-.446 and -.429, respectively, P<.05 for both), and a trend toward such significance was observed at 16 km/h (r=-.360, P=.050). In contrast, there was no correlation between AT CSA and running performance. These findings suggest that longer AT, especially GM AT , may be advantageous to achieve superior running performance, with better running economy, in endurance runners. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Risks and Benefits of Running Barefoot or in Minimalist Shoes

PubMed Central

Perkins, Kyle P.; Hanney, William J.; Rothschild, Carey E.

2014-01-01

Context: The popularity of running barefoot or in minimalist shoes has recently increased because of claims of injury prevention, enhanced running efficiency, and improved performance compared with running in shoes. Potential risks and benefits of running barefoot or in minimalist shoes have yet to be clearly defined. Objective: To determine the methodological quality and level of evidence pertaining to the risks and benefits of running barefoot or in minimalist shoes. Data Sources: In September 2013, a comprehensive search of the Ovid MEDLINE, SPORTDiscus, and CINAHL databases was performed by 2 independent reviewers. Study Selection: Included articles were obtained from peer-reviewed journals in the English language with no limit for year of publication. Final inclusion criteria required at least 1 of the following outcome variables: pain, injury rate, running economy, joint forces, running velocity, electromyography, muscle performance, or edema. Study Design: Systematic review. Level of Evidence: Level 3. Data Extraction: Two reviewers appraised each article using the Downs and Black checklist and appraised each for level of evidence. Results: Twenty-three articles met the criteria for this review. Of 27 possible points on the Downs and Black checklist, articles scored between 13 and 19 points, indicating a range of evidence from very limited to moderate. Moderate evidence supports the following biomechanical differences when running barefoot versus in shoes: overall less maximum vertical ground reaction forces, less extension moment and power absorption at the knee, less foot and ankle dorsiflexion at ground contact, less ground contact time, shorter stride length, increased stride frequency, and increased knee flexion at ground contact. Conclusion: Because of lack of high-quality evidence, no definitive conclusions can be drawn regarding specific risks or benefits to running barefoot, shod, or in minimalist shoes. PMID:25364479

The risks and benefits of running barefoot or in minimalist shoes: a systematic review.

PubMed

Perkins, Kyle P; Hanney, William J; Rothschild, Carey E

2014-11-01

The popularity of running barefoot or in minimalist shoes has recently increased because of claims of injury prevention, enhanced running efficiency, and improved performance compared with running in shoes. Potential risks and benefits of running barefoot or in minimalist shoes have yet to be clearly defined. To determine the methodological quality and level of evidence pertaining to the risks and benefits of running barefoot or in minimalist shoes. In September 2013, a comprehensive search of the Ovid MEDLINE, SPORTDiscus, and CINAHL databases was performed by 2 independent reviewers. Included articles were obtained from peer-reviewed journals in the English language with no limit for year of publication. Final inclusion criteria required at least 1 of the following outcome variables: pain, injury rate, running economy, joint forces, running velocity, electromyography, muscle performance, or edema. Systematic review. Level 3. Two reviewers appraised each article using the Downs and Black checklist and appraised each for level of evidence. Twenty-three articles met the criteria for this review. Of 27 possible points on the Downs and Black checklist, articles scored between 13 and 19 points, indicating a range of evidence from very limited to moderate. Moderate evidence supports the following biomechanical differences when running barefoot versus in shoes: overall less maximum vertical ground reaction forces, less extension moment and power absorption at the knee, less foot and ankle dorsiflexion at ground contact, less ground contact time, shorter stride length, increased stride frequency, and increased knee flexion at ground contact. Because of lack of high-quality evidence, no definitive conclusions can be drawn regarding specific risks or benefits to running barefoot, shod, or in minimalist shoes.

Three essays in energy consumption: Time series analyses

NASA Astrophysics Data System (ADS)

Ahn, Hee Bai

1997-10-01

Firstly, this dissertation investigates that which demand specification is an appropriate model for long-run energy demand between the conventional demand specification and the limited demand specification. In order to determine the components of a stable long-run demand for different sectors of the energy industry, I perform cointegration tests by using the Johansen test procedure. First, I test the conventional demand specification including prices and income as components. Second, I test a limited demand specification only income as a component. The reason for performing these tests is that we can determine that which demand specification is a good long-run predictor of energy consumption between the two demand specifications by using the cointegration tests. Secondly, for the purpose of planning and forecasting energy demand in case of cointegrated system, long-run elasticities are of particular interest. To retrieve the optimal level of energy demand in case of price shock, we need long-run elasticities rather than short-run elasticities. The energy demand study provides valuable information to the energy policy makers who are concerned about the long-run impact of taxes and tariffs. A long-run price elasticity is a primary barometer of the substitution effect between energy and non-energy inputs and long-run income elasticity is an important factor since we can measure the energy demand growing slowly or fast than in the past depending on the magnitude of long-run elasticity. The one other problem in estimating the total energy demand is that there exists an aggregation bias stemming from the process of summation in four different energy types for the total aggregation prices and total aggregation energy consumption. In order to measure the aggregation bias between the Btu aggregation method and the Divisia Index method, i.e., which methodology has less aggregation bias in the long-run, I compare the two estimation results with calculated results estimated on a disaggregated basis. Thus, we can confirm whether or not the theoretically superior methodology has less aggregation bias in empirical estimation. Thirdly, I investigate the causal relationships between energy use and GDP. In order to detect causal relationships both in the long-run and in the short-run, the VECM (Vector Error Correction Model) can be used if there exists cointegration relationships among the variables. I detect the causal effects between energy use and GDP by estimating the VECM based on the multivariate production function including the labor and capital variables.

Porting DubaiSat-2 Flight Software to RTEMS: A Feasibility Study

NASA Astrophysics Data System (ADS)

Khoory, Mohammed; Al Shamsi, Zakareyya; Al Midfa, Ibrahim

2015-09-01

This paper details the process taken by EIAST to study RTEMS as a potential real-time operating system for future space missions. The direction was to attempt to run the DubaiSat-2 flight software under RTEMS 4.10.2 with as little modification to the original source as possible. The implementation used a “translation layer” to translate system calls used by the DS-2 flight software into RTEMS system calls. The RTEMS RTL project was integrated to satisfy the run-time loading requirement, and some differences in the filesystem were encountered and worked around. The implementation was tested for performance and stability, and comparisons were made. The conclusion is that RTEMS provides an adequate base for future space missions with certain advantages over other RTOS’s including cost, a smaller executable size, and control over the source. Drawbacks include the slow speed of loading tasks during runtime and some filesystem integrity issues during unexpected reboots.

Methods of the international study on soccer at altitude 3600 m (ISA3600)

PubMed Central

Gore, Christopher J; Aughey, Robert J; Bourdon, Pitre C; Garvican-Lewis, Laura A; Soria, Rudy; Claros, Jesus C Jimenez; Sargent, Charli; Roach, Gregory D; Buchheit, Martin; Simpson, Ben M; Hammond, Kristal; Kley, Marlen; Wachsmuth, Nadine; Pepper, Mark; Edwards, Alistair; Cuenca, Douglas; Vidmar, Tony; Spielvogel, Hilde; Schmidt, Walter F

2013-01-01

Background We describe here the 3-year process underpinning a multinational collaboration to investigate soccer played at high altitude—La Paz, Bolivia (3600 m). There were two main aims: first, to quantify the extent to which running performance would be altered at 3600 m compared with near sea level; and second, to characterise the time course of acclimatisation of running performance and underlying physiology to training and playing at 3600 m. In addition, this project was able to measure the physiological changes and the effect on running performance of altitude-adapted soccer players from 3600 m playing at low altitude. Methods A U20 Bolivian team (‘The Strongest’ from La Paz, n=19) played a series of five games against a U17 team from sea level in Australia (The Joeys, n=20). 2 games were played near sea level (Santa Cruz 430 m) over 5 days and then three games were played in La Paz over the next 12 days. Measures were (1) game and training running performance—including global positioning system (GPS) data on distance travelled and velocity of movement; (2) blood—including haemoglobin mass, blood volume, blood gases and acid–base status; (3) acclimatisation—including resting heart rate variability, perceived altitude sickness, as well as heart rate and perceived exertion responses to a submaximal running test; and (4) sleep patterns. Conclusions Pivotal to the success of the project were the strong professional networks of the collaborators, with most exceeding 10 years, the links of several of the researchers to soccer federations, as well as the interest and support of the two head coaches. PMID:24282214

ATLAS Metadata Infrastructure Evolution for Run 2 and Beyond

NASA Astrophysics Data System (ADS)

van Gemmeren, P.; Cranshaw, J.; Malon, D.; Vaniachine, A.

2015-12-01

ATLAS developed and employed for Run 1 of the Large Hadron Collider a sophisticated infrastructure for metadata handling in event processing jobs. This infrastructure profits from a rich feature set provided by the ATLAS execution control framework, including standardized interfaces and invocation mechanisms for tools and services, segregation of transient data stores with concomitant object lifetime management, and mechanisms for handling occurrences asynchronous to the control framework's state machine transitions. This metadata infrastructure is evolving and being extended for Run 2 to allow its use and reuse in downstream physics analyses, analyses that may or may not utilize the ATLAS control framework. At the same time, multiprocessing versions of the control framework and the requirements of future multithreaded frameworks are leading to redesign of components that use an incident-handling approach to asynchrony. The increased use of scatter-gather architectures, both local and distributed, requires further enhancement of metadata infrastructure in order to ensure semantic coherence and robust bookkeeping. This paper describes the evolution of ATLAS metadata infrastructure for Run 2 and beyond, including the transition to dual-use tools—tools that can operate inside or outside the ATLAS control framework—and the implications thereof. It further examines how the design of this infrastructure is changing to accommodate the requirements of future frameworks and emerging event processing architectures.

Pathways to designing and running an operational flood forecasting system: an adventure game!

NASA Astrophysics Data System (ADS)

Arnal, Louise; Pappenberger, Florian; Ramos, Maria-Helena; Cloke, Hannah; Crochemore, Louise; Giuliani, Matteo; Aalbers, Emma

2017-04-01

In the design and building of an operational flood forecasting system, a large number of decisions have to be taken. These include technical decisions related to the choice of the meteorological forecasts to be used as input to the hydrological model, the choice of the hydrological model itself (its structure and parameters), the selection of a data assimilation procedure to run in real-time, the use (or not) of a post-processor, and the computing environment to run the models and display the outputs. Additionally, a number of trans-disciplinary decisions are also involved in the process, such as the way the needs of the users will be considered in the modelling setup and how the forecasts (and their quality) will be efficiently communicated to ensure usefulness and build confidence in the forecasting system. We propose to reflect on the numerous, alternative pathways to designing and running an operational flood forecasting system through an adventure game. In this game, the player is the protagonist of an interactive story driven by challenges, exploration and problem-solving. For this presentation, you will have a chance to play this game, acting as the leader of a forecasting team at an operational centre. Your role is to manage the actions of your team and make sequential decisions that impact the design and running of the system in preparation to and during a flood event, and that deal with the consequences of the forecasts issued. Your actions are evaluated by how much they cost you in time, money and credibility. Your aim is to take decisions that will ultimately lead to a good balance between time and money spent, while keeping your credibility high over the whole process. This game was designed to highlight the complexities behind decision-making in an operational forecasting and emergency response context, in terms of the variety of pathways that can be selected as well as the timescale, cost and timing of effective actions.

Testing Game-Based Performance in Team-Handball.

PubMed

Wagner, Herbert; Orwat, Matthias; Hinz, Matthias; Pfusterschmied, Jürgen; Bacharach, David W; von Duvillard, Serge P; Müller, Erich

2016-10-01

Wagner, H, Orwat, M, Hinz, M, Pfusterschmied, J, Bacharach, DW, von Duvillard, SP, and Müller, E. Testing game-based performance in team-handball. J Strength Cond Res 30(10): 2794-2801, 2016-Team-handball is a fast paced game of defensive and offensive action that includes specific movements of jumping, passing, throwing, checking, and screening. To date and to the best of our knowledge, a game-based performance test (GBPT) for team-handball does not exist. Therefore, the aim of this study was to develop and validate such a test. Seventeen experienced team-handball players performed 2 GBPTs separated by 7 days between each test, an incremental treadmill running test, and a team-handball test game (TG) (2 × 20 minutes). Peak oxygen uptake (V[Combining Dot Above]O2peak), blood lactate concentration (BLC), heart rate (HR), sprinting time, time of offensive and defensive actions as well as running intensities, ball velocity, and jump height were measured in the game-based test. Reliability of the tests was calculated using an intraclass correlation coefficient (ICC). Additionally, we measured V[Combining Dot Above]O2peak in the incremental treadmill running test and BLC, HR, and running intensities in the team-handball TG to determine the validity of the GBPT. For the test-retest reliability, we found an ICC >0.70 for the peak BLC and HR, mean offense and defense time, as well as ball velocity that yielded an ICC >0.90 for the V[Combining Dot Above]O2peak in the GBPT. Percent walking and standing constituted 73% of total time. Moderate (18%) and high (9%) intensity running in the GBPT was similar to the team-handball TG. Our results indicated that the GBPT is a valid and reliable test to analyze team-handball performance (physiological and biomechanical variables) under conditions similar to competition.

The impact of running away on teen girls' sexual health.

PubMed

Lacoursiere, Terri; Fontenot, Holly B

2012-01-01

This article reviews three recent studies investigating the impact of running away on adolescent females' sexual health. There are between 500,000 and 2.8 million runaway and homeless youth in the U.S. at any point in time, and adolescent females are at increased risk as compared to males. All three studies analyzed data from The National Longitudinal Study of Adolescent Health and each examined a different health risk related to runaways including sexual debut, sexual assault and pregnancy. These studies show how health risks are persistent even after adolescents return home to their primary residence. © 2012 AWHONN.

Calibration of the LIGO gravitational wave detectors in the fifth science run

NASA Astrophysics Data System (ADS)

Abadie, J.; Abbott, B. P.; Abbott, R.; Abernathy, M.; Adams, C.; Adhikari, R.; Ajith, P.; Allen, B.; Allen, G.; Amador Ceron, E.; Amin, R. S.; Anderson, S. B.; Anderson, W. G.; Arain, M. A.; Araya, M.; Aronsson, M.; Aso, Y.; Aston, S.; Atkinson, D. E.; Aufmuth, P.; Aulbert, C.; Babak, S.; Baker, P.; Ballmer, S.; Barker, D.; Barnum, S.; Barr, B.; Barriga, P.; Barsotti, L.; Barton, M. A.; Bartos, I.; Bassiri, R.; Bastarrika, M.; Bauchrowitz, J.; Behnke, B.; Benacquista, M.; Bertolini, A.; Betzwieser, J.; Beveridge, N.; Beyersdorf, P. T.; Bilenko, I. A.; Billingsley, G.; Birch, J.; Biswas, R.; Black, E.; Blackburn, J. K.; Blackburn, L.; Blair, D.; Bland, B.; Bock, O.; Bodiya, T. P.; Bondarescu, R.; Bork, R.; Born, M.; Bose, S.; Boyle, M.; Brady, P. R.; Braginsky, V. B.; Brau, J. E.; Breyer, J.; Bridges, D. O.; Brinkmann, M.; Britzger, M.; Brooks, A. F.; Brown, D. A.; Buonanno, A.; Burguet-Castell, J.; Burmeister, O.; Byer, R. L.; Cadonati, L.; Cain, J.; Camp, J. B.; Campsie, P.; Cannizzo, J.; Cannon, K. C.; Cao, J.; Capano, C.; Caride, S.; Caudill, S.; Cavaglià, M.; Cepeda, C.; Chalermsongsak, T.; Chalkley, E.; Charlton, P.; Chelkowski, S.; Chen, Y.; Christensen, N.; Chua, S. S. Y.; Chung, C. T. Y.; Clark, D.; Clark, J.; Clayton, J. H.; Conte, R.; Cook, D.; Corbitt, T. R.; Cornish, N.; Costa, C. A.; Coward, D. M.; Coyne, D. C.; Creighton, J. D. E.; Creighton, T. D.; Cruise, A. M.; Culter, R. M.; Cumming, A.; Cunningham, L.; Dahl, K.; Danilishin, S. L.; Dannenberg, R.; Danzmann, K.; Das, K.; Daudert, B.; Davies, G.; Davis, A.; Daw, E. J.; Dayanga, T.; Debra, D.; Degallaix, J.; Dergachev, V.; Derosa, R.; Desalvo, R.; Devanka, P.; Dhurandhar, S.; di Palma, I.; Díaz, M.; Donovan, F.; Dooley, K. L.; Doomes, E. E.; Dorsher, S.; Douglas, E. S. D.; Drever, R. W. P.; Driggers, J. C.; Dueck, J.; Dumas, J.-C.; Eberle, T.; Edgar, M.; Edwards, M.; Effler, A.; Ehrens, P.; Engel, R.; Etzel, T.; Evans, M.; Evans, T.; Fairhurst, S.; Fan, Y.; Farr, B. F.; Fazi, D.; Fehrmann, H.; Feldbaum, D.; Finn, L. S.; Flanigan, M.; Flasch, K.; Foley, S.; Forrest, C.; Forsi, E.; Fotopoulos, N.; Frede, M.; Frei, M.; Frei, Z.; Freise, A.; Frey, R.; Fricke, T. T.; Friedrich, D.; Fritschel, P.; Frolov, V. V.; Fulda, P.; Fyffe, M.; Garofoli, J. A.; Gholami, I.; Ghosh, S.; Giaime, J. A.; Giampanis, S.; Giardina, K. D.; Gill, C.; Goetz, E.; Goggin, L. M.; González, G.; Gorodetsky, M. L.; Goßler, S.; Graef, C.; Grant, A.; Gras, S.; Gray, C.; Greenhalgh, R. J. S.; Gretarsson, A. M.; Grosso, R.; Grote, H.; Grunewald, S.; Gustafson, E. K.; Gustafson, R.; Hage, B.; Hall, P.; Hallam, J. M.; Hammer, D.; Hammond, G.; Hanks, J.; Hanna, C.; Hanson, J.; Harms, J.; Harry, G. M.; Harry, I. W.; Harstad, E. D.; Haughian, K.; Hayama, K.; Hayler, T.; Heefner, J.; Heng, I. S.; Heptonstall, A. W.; Hewitson, M.; Hild, S.; Hirose, E.; Hoak, D.; Hodge, K. A.; Holt, K.; Hosken, D. J.; Hough, J.; Howell, E. J.; Hoyland, D.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh-Dinh, T.; Ingram, D. R.; Inta, R.; Isogai, T.; Ivanov, A.; Johnson, W. W.; Jones, D. I.; Jones, G.; Jones, R.; Ju, L.; Kalmus, P.; Kalogera, V.; Kandhasamy, S.; Kanner, J. B.; Katsavounidis, E.; Kawabe, K.; Kawamura, S.; Kawazoe, F.; Kells, W.; Keppel, D. G.; Khalaidovski, A.; Khalili, F. Y.; Khazanov, E. A.; Kim, H.; King, P. J.; Kinzel, D. L.; Kissel, J. S.; Klimenko, S.; Kondrashov, V.; Kopparapu, R.; Koranda, S.; Kozak, D.; Krause, T.; Kringel, V.; Krishnamurthy, S.; Krishnan, B.; Kuehn, G.; Kullman, J.; Kumar, R.; Kwee, P.; Landry, M.; Lang, M.; Lantz, B.; Lastzka, N.; Lazzarini, A.; Leaci, P.; Leong, J.; Leonor, I.; Li, J.; Lin, H.; Lindquist, P. E.; Lockerbie, N. A.; Lodhia, D.; Lormand, M.; Lu, P.; Luan, J.; Lubinski, M.; Lucianetti, A.; Lück, H.; Lundgren, A.; Machenschalk, B.; Macinnis, M.; Mageswaran, M.; Mailand, K.; Mak, C.; Mandel, I.; Mandic, V.; Márka, S.; Márka, Z.; Maros, E.; Martin, I. W.; Martin, R. M.; Marx, J. N.; Mason, K.; Matichard, F.; Matone, L.; Matzner, R. A.; Mavalvala, N.; McCarthy, R.; McClelland, D. E.; McGuire, S. C.; McIntyre, G.; McIvor, G.; McKechan, D. J. A.; Meadors, G.; Mehmet, M.; Meier, T.; Melatos, A.; Melissinos, A. C.; Mendell, G.; Menéndez, D. F.; Mercer, R. A.; Merill, L.; Meshkov, S.; Messenger, C.; Meyer, M. S.; Miao, H.; Miller, J.; Mino, Y.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Moe, B.; Mohanty, S. D.; Mohapatra, S. R. P.; Moraru, D.; Moreno, G.; Morioka, T.; Mors, K.; Mossavi, K.; Mowlowry, C. M.; Mueller, G.; Mukherjee, S.; Mullavey, A.; Müller-Ebhardt, H.; Munch, J.; Murray, P. G.; Nash, T.; Nawrodt, R.; Nelson, J.; Newton, G.; Nishizawa, A.; Nolting, D.; Ochsner, E.; O'Dell, J.; Ogin, G. H.; Oldenburg, R. G.; O'Reilly, B.; O'Shaughnessy, R.; Osthelder, C.; Ottaway, D. J.; Ottens, R. S.; Overmier, H.; Owen, B. J.; Page, A.; Pan, Y.; Pankow, C.; Papa, M. A.; Pareja, M.; Patel, P.; Pathak, D.; Pedraza, M.; Pekowsky, L.; Penn, S.; Peralta, C.; Perreca, A.; Pickenpack, M.; Pinto, I. M.; Pitkin, M.; Pletsch, H. J.; Plissi, M. V.; Postiglione, F.; Predoi, V.; Price, L. R.; Prijatelj, M.; Principe, M.; Prix, R.; Prokhorov, L.; Puncken, O.; Quetschke, V.; Raab, F. J.; Radke, T.; Radkins, H.; Raffai, P.; Rakhmanov, M.; Rankins, B.; Raymond, V.; Reed, C. M.; Reed, T.; Reid, S.; Reitze, D. H.; Riesen, R.; Riles, K.; Roberts, P.; Robertson, N. A.; Robinson, C.; Robinson, E. L.; Roddy, S.; Röver, C.; Rollins, J.; Romano, J. D.; Romie, J. H.; Rowan, S.; Rüdiger, A.; Ryan, K.; Sakata, S.; Sakosky, M.; Salemi, F.; Sammut, L.; Sancho de La Jordana, L.; Sandberg, V.; Sannibale, V.; Santamaría, L.; Santostasi, G.; Saraf, S.; Sathyaprakash, B. S.; Sato, S.; Satterthwaite, M.; Saulson, P. R.; Savage, R.; Schilling, R.; Schnabel, R.; Schofield, R. M. S.; Schulz, B.; Schutz, B. F.; Schwinberg, P.; Scott, J.; Scott, S. M.; Searle, A. C.; Seifert, F.; Sellers, D.; Sengupta, A. S.; Sergeev, A.; Shaddock, D. A.; Shapiro, B.; Shawhan, P.; Shoemaker, D. H.; Sibley, A.; Siemens, X.; Sigg, D.; Singer, A.; Sintes, A. M.; Skelton, G.; Slagmolen, B. J. J.; Slutsky, J.; Smith, J. R.; Smith, M. R.; Smith, N. D.; Somiya, K.; Sorazu, B.; Speirits, F. C.; Stein, A. J.; Stein, L. C.; Steinlechner, S.; Steplewski, S.; Stochino, A.; Stone, R.; Strain, K. A.; Strigin, S.; Stroeer, A.; Stuver, A. L.; Summerscales, T. Z.; Sung, M.; Susmithan, S.; Sutton, P. J.; Szokoly, G. P.; Talukder, D.; Tanner, D. B.; Tarabrin, S. P.; Taylor, J. R.; Taylor, R.; Thomas, P.; Thorne, K. A.; Thorne, K. S.; Thrane, E.; Thüring, A.; Titsler, C.; Tokmakov, K. V.; Torres, C.; Torrie, C. I.; Traylor, G.; Trias, M.; Tseng, K.; Turner, L.; Ugolini, D.; Urbanek, K.; Vahlbruch, H.; Vaishnav, B.; Vallisneri, M.; van den Broeck, C.; van der Sluys, M. V.; van Veggel, A. A.; Vass, S.; Vaulin, R.; Vecchio, A.; Veitch, J.; Veitch, P. J.; Veltkamp, C.; Villar, A. E.; Vorvick, C.; Vyachanin, S. P.; Waldman, S. J.; Wallace, L.; Wanner, A.; Ward, R. L.; Wei, P.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Wen, L.; Wen, S.; Wessels, P.; West, M.; Westphal, T.; Wette, K.; Whelan, J. T.; Whitcomb, S. E.; White, D. J.; Whiting, B. F.; Wilkinson, C.; Willems, P. A.; Williams, L.; Willke, B.; Winkelmann, L.; Winkler, W.; Wipf, C. C.; Wiseman, A. G.; Woan, G.; Wooley, R.; Worden, J.; Yakushin, I.; Yamamoto, H.; Yamamoto, K.; Yeaton-Massey, D.; Yoshida, S.; Yu, P. P.; Zanolin, M.; Zhang, L.; Zhang, Z.; Zhao, C.; Zotov, N.; Zucker, M. E.; Zweizig, J.; LIGO Scientific Collaboration

2010-12-01

The Laser Interferometer Gravitational Wave Observatory (LIGO) is a network of three detectors built to detect local perturbations in the space-time metric from astrophysical sources. These detectors, two in Hanford, WA and one in Livingston, LA, are power-recycled Fabry-Perot Michelson interferometers. In their fifth science run (S5), between November 2005 and October 2007, these detectors accumulated one year of triple coincident data while operating at their designed sensitivity. In this paper, we describe the calibration of the instruments in the S5 data set, including measurement techniques and uncertainty estimation.

Modeling Subsurface Reactive Flows Using Leadership-Class Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, Richard T; Hammond, Glenn; Lichtner, Peter

2009-01-01

We describe our experiences running PFLOTRAN - a code for simulation of coupled hydro-thermal-chemical processes in variably saturated, non-isothermal, porous media - on leadership-class supercomputers, including initial experiences running on the petaflop incarnation of Jaguar, the Cray XT5 at the National Center for Computational Sciences at Oak Ridge National Laboratory. PFLOTRAN utilizes fully implicit time-stepping and is built on top of the Portable, Extensible Toolkit for Scientific Computation (PETSc). We discuss some of the hurdles to 'at scale' performance with PFLOTRAN and the progress we have made in overcoming them on leadership-class computer architectures.

Agricultural Airplane Mission Time Structure Characteristics

NASA Technical Reports Server (NTRS)

Jewel, J. W., Jr.

1982-01-01

The time structure characteristics of agricultural airplane missions were studied by using records from NASA VGH flight recorders. Flight times varied from less than 3 minutes to more than 103 minutes. There was a significant reduction in turning time between spreading runs as pilot experience in the airplane type increased. Spreading runs accounted for only 25 to 29 percent of the flight time of an agricultural airplane. Lowering the longitudinal stick force appeared to reduce both the turning time between spreading runs and pilot fatigue at the end of a working day.

A High Temperature Cyclic Oxidation Data Base for Selected Materials Tested at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Barrett, Charles A.

2003-01-01

The cyclic oxidation test results for some 1000 high temperature commercial and experimental alloys have been collected in an EXCEL database. This database represents over thirty years of research at NASA Glenn Research Center in Cleveland, Ohio. The data is in the form of a series of runs of specific weight change versus time values for a set of samples tested at a given temperature, cycle time, and exposure time. Included on each run is a set of embedded plots of the critical data. The nature of the data is discussed along with analysis of the cyclic oxidation process. In addition examples are given as to how a set of results can be analyzed. The data is assembled on a read-only compact disk which is available on request from Materials Durability Branch, NASA Glenn Research Center, Cleveland, Ohio.

GPU Particle Tracking and MHD Simulations with Greatly Enhanced Computational Speed

NASA Astrophysics Data System (ADS)

Ziemba, T.; O'Donnell, D.; Carscadden, J.; Cash, M.; Winglee, R.; Harnett, E.

2008-12-01

GPUs are intrinsically highly parallelized systems that provide more than an order of magnitude computing speed over a CPU based systems, for less cost than a high end-workstation. Recent advancements in GPU technologies allow for full IEEE float specifications with performance up to several hundred GFLOPs per GPU, and new software architectures have recently become available to ease the transition from graphics based to scientific applications. This allows for a cheap alternative to standard supercomputing methods and should increase the time to discovery. 3-D particle tracking and MHD codes have been developed using NVIDIA's CUDA and have demonstrated speed up of nearly a factor of 20 over equivalent CPU versions of the codes. Such a speed up enables new applications to develop, including real time running of radiation belt simulations and real time running of global magnetospheric simulations, both of which could provide important space weather prediction tools.

SWATShare- A Platform for Collaborative Hydrology Research and Education with Cyber-enabled Sharing, Running and Visualization of SWAT Models

NASA Astrophysics Data System (ADS)

Rajib, M. A.; Merwade, V.; Song, C.; Zhao, L.; Kim, I. L.; Zhe, S.

2014-12-01

Setting up of any hydrologic model requires a large amount of efforts including compilation of all the data, creation of input files, calibration and validation. Given the amount of efforts involved, it is possible that models for a watershed get created multiple times by multiple groups or organizations to accomplish different research, educational or policy goals. To reduce the duplication of efforts and enable collaboration among different groups or organizations around an already existing hydrology model, a platform is needed where anyone can search for existing models, perform simple scenario analysis and visualize model results. The creator and users of a model on such a platform can then collaborate to accomplish new research or educational objectives. From this perspective, a prototype cyber-infrastructure (CI), called SWATShare, is developed for sharing, running and visualizing Soil Water Assessment Tool (SWAT) models in an interactive GIS-enabled web environment. Users can utilize SWATShare to publish or upload their own models, search and download existing SWAT models developed by others, run simulations including calibration using high performance resources provided by XSEDE and Cloud. Besides running and sharing, SWATShare hosts a novel spatio-temporal visualization system for SWAT model outputs. In temporal scale, the system creates time-series plots for all the hydrology and water quality variables available along the reach as well as in watershed-level. In spatial scale, the system can dynamically generate sub-basin level thematic maps for any variable at any user-defined date or date range; and thereby, allowing users to run animations or download the data for subsequent analyses. In addition to research, SWATShare can also be used within a classroom setting as an educational tool for modeling and comparing the hydrologic processes under different geographic and climatic settings. SWATShare is publicly available at https://www.water-hub.org/swatshare.

Short-run and long-run elasticities of electricity demand in the public sector: A case study of the United States Navy bases

NASA Astrophysics Data System (ADS)

Choi, Jino

Numerous studies have examined the elasticities of electricity demand---residential as well as commercial and industrial---in the private sector. However, no one appears to have examined the behavior of the public sector demand. This study aims to fill that gap and to provide insights into the electricity demand in the public sector, using the U.S. Navy bases as a case study. This study examines electricity demand data of 38 Navy activities within the United States for a 16-year time period from 1985 through 2000. The Navy maintains a highly diverse shore infrastructure to conduct its mission and to support the fleet. The types of shore facilities include shipyards, air stations, aviation depots, hospital, and many others. These Navy activities are analogous to commercial or industrial organizations in the private sector. In this study, I used a number of analytical approaches to estimate short-run and long-run elasticities of electricity demand. Estimation using pooled data was rejected because it failed the test for homogeneity. Estimation using the time series data of each Navy activity had several wrong signs for coefficients. The Stein-rule estimator did not differ significantly from the separate cross-section estimates because of the strong rejection of the homogeneity assumption. The iterative Bayesian shrinkage estimator provided the most reasonable results. The empirical findings from this study are as follows. First, the Navy's electricity demand is price elastic. Second, the price elasticities appear to be lower than those of the private sector. The short-run price elasticities for the Navy activities ranged from -0.083 to -0.157. The long-run price elasticities ranged from -0.151 to -0.769.

76 FR 13683 - Self-Regulatory Organizations; The Fixed Income Clearing Corporation; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... To Move the Time at Which It Runs Its Daily Morning Pass March 8, 2011. Pursuant to Section 19(b)(1... Backed Securities Division (``MBSD'') intends to move the time at which it runs its daily morning pass... notify participants that MBSD intends to move the time at which it runs its daily morning pass from 10:30...

Mechanics and energetics of human locomotion on sand.

PubMed

Lejeune, T M; Willems, P A; Heglund, N C

1998-07-01

Moving about in nature often involves walking or running on a soft yielding substratum such as sand, which has a profound effect on the mechanics and energetics of locomotion. Force platform and cinematographic analyses were used to determine the mechanical work performed by human subjects during walking and running on sand and on a hard surface. Oxygen consumption was used to determine the energetic cost of walking and running under the same conditions. Walking on sand requires 1.6-2.5 times more mechanical work than does walking on a hard surface at the same speed. In contrast, running on sand requires only 1.15 times more mechanical work than does running on a hard surface at the same speed. Walking on sand requires 2.1-2.7 times more energy expenditure than does walking on a hard surface at the same speed; while running on sand requires 1.6 times more energy expenditure than does running on a hard surface. The increase in energy cost is due primarily to two effects: the mechanical work done on the sand, and a decrease in the efficiency of positive work done by the muscles and tendons.

Isocapnic hyperpnea training improves performance in competitive male runners.

PubMed

Leddy, John J; Limprasertkul, Atcharaporn; Patel, Snehal; Modlich, Frank; Buyea, Cathy; Pendergast, David R; Lundgren, Claes E G

2007-04-01

The effects of voluntary isocapnic hyperpnea (VIH) training (10 h over 4 weeks, 30 min/day) on ventilatory system and running performance were studied in 15 male competitive runners, 8 of whom trained twice weekly for 3 more months. Control subjects (n = 7) performed sham-VIH. Vital capacity (VC), FEV1, maximum voluntary ventilation (MVV), maximal inspiratory and expiratory mouth pressures, VO2max, 4-mile run time, treadmill run time to exhaustion at 80% VO2max, serum lactate, total ventilation (V(E)), oxygen consumption (VO2) oxygen saturation and cardiac output were measured before and after 4 weeks of VIH. Respiratory parameters and 4-mile run time were measured monthly during the 3-month maintenance period. There were no significant changes in post-VIH VC and FEV1 but MVV improved significantly (+10%). Maximal inspiratory and expiratory mouth pressures, arterial oxygen saturation and cardiac output did not change post-VIH. Respiratory and running performances were better 7- versus 1 day after VIH. Seven days post-VIH, respiratory endurance (+208%) and treadmill run time (+50%) increased significantly accompanied by significant reductions in respiratory frequency (-6%), V(E) (-7%), VO2 (-6%) and lactate (-18%) during the treadmill run. Post-VIH 4-mile run time did not improve in the control group whereas it improved in the experimental group (-4%) and remained improved over a 3 month period of reduced VIH frequency. The improvements cannot be ascribed to improved blood oxygen delivery to muscle or to psychological factors.

40 CFR Table 6 to Subpart Dddd of... - Model Rule-Emission Limitations That Apply to Incinerators on and After [Date to be specified in...

Code of Federal Regulations, 2012 CFR

2012-07-01

... per million dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10... (Reapproved 2008) c. Oxides of nitrogen 53 parts per million dry volume 3-run average (1 hour minimum sample... average (1 hour minimum sample time per run) Performance test (Method 6 or 6c at 40 CFR part 60, appendix...

40 CFR Table 6 to Subpart Dddd of... - Model Rule-Emission Limitations That Apply to Incinerators on and After [Date to be specified in...

Code of Federal Regulations, 2011 CFR

2011-07-01

... per million dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10... (Reapproved 2008) c. Oxides of nitrogen 53 parts per million dry volume 3-run average (1 hour minimum sample... average (1 hour minimum sample time per run) Performance test (Method 6 or 6c at 40 CFR part 60, appendix...

40 CFR Table 2 to Subpart Dddd of... - Model Rule-Emission Limitations That Apply to Incinerators Before [Date to be specified in state...

Code of Federal Regulations, 2014 CFR

2014-07-01

... parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test..., appendix A-4). Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour minimum sample... (1 hour minimum sample time per run) Performance test (Method 6 or 6c of appendix A of this part) a...

40 CFR Table 2 to Subpart Dddd of... - Model Rule-Emission Limitations That Apply to Incinerators Before [Date to be specified in state...

Code of Federal Regulations, 2013 CFR

2013-07-01

... parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test..., appendix A-4). Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour minimum sample... (1 hour minimum sample time per run) Performance test (Method 6 or 6c of appendix A of this part) a...

The Basis System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubois, P.F.

1989-05-16

This paper discusses the basis system. Basis is a program development system for scientific programs. It has been developed over the last five years at Lawrence Livermore National Laboratory (LLNL), where it is now used in about twenty major programming efforts. The Basis System includes two major components, a program development system and a run-time package. The run-time package provides the Basis Language interpreter, through which the user does input, output, plotting, and control of the program's subroutines and functions. Variables in the scientific packages are known to this interpreter, so that the user may arbitrarily print, plot, and calculatemore » with, any major program variables. Also provided are facilities for dynamic memory management, terminal logs, error recovery, text-file i/o, and the attachment of non-Basis-developed packages.« less

Recent Upgrades to NASA SPoRT Initialization Datasets for the Environmental Modeling System

NASA Technical Reports Server (NTRS)

Case, Jonathan L.; Lafontaine, Frank J.; Molthan, Andrew L.; Zavodsky, Bradley T.; Rozumalski, Robert A.

2012-01-01

The NASA Short-term Prediction Research and Transition (SPoRT) Center has developed several products for its NOAA/National Weather Service (NWS) partners that can initialize specific fields for local model runs within the NOAA/NWS Science and Training Resource Center Environmental Modeling System (EMS). The suite of SPoRT products for use in the EMS consists of a Sea Surface Temperature (SST) composite that includes a Lake Surface Temperature (LST) analysis over the Great Lakes, a Great Lakes sea-ice extent within the SST composite, a real-time Green Vegetation Fraction (GVF) composite, and NASA Land Information System (LIS) gridded output. This paper and companion poster describe each dataset and provide recent upgrades made to the SST, Great Lakes LST, GVF composites, and the real-time LIS runs.

CADNA: a library for estimating round-off error propagation

NASA Astrophysics Data System (ADS)

Jézéquel, Fabienne; Chesneaux, Jean-Marie

2008-06-01

The CADNA library enables one to estimate round-off error propagation using a probabilistic approach. With CADNA the numerical quality of any simulation program can be controlled. Furthermore by detecting all the instabilities which may occur at run time, a numerical debugging of the user code can be performed. CADNA provides new numerical types on which round-off errors can be estimated. Slight modifications are required to control a code with CADNA, mainly changes in variable declarations, input and output. This paper describes the features of the CADNA library and shows how to interpret the information it provides concerning round-off error propagation in a code. Program summaryProgram title:CADNA Catalogue identifier:AEAT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAT_v1_0.html Program obtainable from:CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.:53 420 No. of bytes in distributed program, including test data, etc.:566 495 Distribution format:tar.gz Programming language:Fortran Computer:PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBM Operating system:LINUX, UNIX Classification:4.14, 6.5, 20 Nature of problem:A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time. Solution method:The CADNA library [1] implements Discrete Stochastic Arithmetic [2-4] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic. Restrictions:CADNA requires a Fortran 90 (or newer) compiler. In the program to be linked with the CADNA library, round-off errors on complex variables cannot be estimated. Furthermore array functions such as product or sum must not be used. Only the arithmetic operators and the abs, min, max and sqrt functions can be used for arrays. Running time:The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected. References:The CADNA library, URL address: http://www.lip6.fr/cadna. J.-M. Chesneaux, L'arithmétique Stochastique et le Logiciel CADNA, Habilitation á diriger des recherches, Université Pierre et Marie Curie, Paris, 1995. J. Vignes, A stochastic arithmetic for reliable scientific computation, Math. Comput. Simulation 35 (1993) 233-261. J. Vignes, Discrete stochastic arithmetic for validating results of numerical software, Numer. Algorithms 37 (2004) 377-390.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Passarge, M; Fix, M K; Manser, P

Purpose: To create and test an accurate EPID-frame-based VMAT QA metric to detect gross dose errors in real-time and to provide information about the source of error. Methods: A Swiss cheese model was created for an EPID-based real-time QA process. The system compares a treatmentplan- based reference set of EPID images with images acquired over each 2° gantry angle interval. The metric utilizes a sequence of independent consecutively executed error detection Methods: a masking technique that verifies infield radiation delivery and ensures no out-of-field radiation; output normalization checks at two different stages; global image alignment to quantify rotation, scaling andmore » translation; standard gamma evaluation (3%, 3 mm) and pixel intensity deviation checks including and excluding high dose gradient regions. Tolerances for each test were determined. For algorithm testing, twelve different types of errors were selected to modify the original plan. Corresponding predictions for each test case were generated, which included measurement-based noise. Each test case was run multiple times (with different noise per run) to assess the ability to detect introduced errors. Results: Averaged over five test runs, 99.1% of all plan variations that resulted in patient dose errors were detected within 2° and 100% within 4° (∼1% of patient dose delivery). Including cases that led to slightly modified but clinically equivalent plans, 91.5% were detected by the system within 2°. Based on the type of method that detected the error, determination of error sources was achieved. Conclusion: An EPID-based during-treatment error detection system for VMAT deliveries was successfully designed and tested. The system utilizes a sequence of methods to identify and prevent gross treatment delivery errors. The system was inspected for robustness with realistic noise variations, demonstrating that it has the potential to detect a large majority of errors in real-time and indicate the error source. J. V. Siebers receives funding support from Varian Medical Systems.« less

The CHAT System: An OS/360 MVT Time-Sharing Subsystem for Displays and Teletype. Technical Progress Report.

ERIC Educational Resources Information Center

Schultz, Gary D.

The design and operation of a time-sharing monitor are described. It runs under OS/360 MVT that supports multiple application program interaction with operators of CRT (cathode ray tube) display stations and of a teletype. Key design features discussed include: 1) an interface allowing application programs to be coded in either PL/I or assembler…

Quantitative Spectral Radiance Measurements in the HYMETS Arc Jet

NASA Technical Reports Server (NTRS)

Danehy, Paul M.; Hires, Drew V.; Johansen, Craig T.; Bathel, Brett F.; Jones, Stephen B.; Gragg, Jeffrey G.; Splinter, Scott C.

2012-01-01

Calibrated spectral radiance measurements of gaseous emission spectra have been obtained from the HYMETS (Hypersonic Materials Environmental Test System) 400 kW arc-heated wind tunnel at NASA Langley Research Center. A fiber-optic coupled spectrometer collected natural luminosity from the flow. Spectral radiance measurements are reported between 340 and 1000 nm. Both Silicon Carbide (SiC) and Phenolic Impregnated Carbon Ablator (PICA) samples were placed in the flow. Test gases studied included a mostly-N2 atmosphere (95% nitrogen, 5% argon), a simulated Earth Air atmosphere (75% nitrogen, 20% oxygen, 5% argon) and a simulated Martian atmosphere (71% carbon dioxide, 24% nitrogen, 5% argon). The bulk enthalpy of the flow was varied as was the location of the measurement. For the intermediate flow enthalpy tested (20 MJ/kg), emission from the Mars simulant gas was about 10 times higher than the Air flow and 15 times higher than the mostly-N2 atmosphere. Shock standoff distances were estimated from the spectral radiance measurements. Within-run, run-to-run and day-to-day repeatability of the emission were studied, with significant variations (15-100%) noted.

Performance of the LHCb RICH detectors during the LHC Run II

NASA Astrophysics Data System (ADS)

Papanestis, A.; D'Ambrosio, C.; LHCb RICH Collaboration

2017-12-01

The LHCb RICH system provides hadron identification over a wide momentum range (2-100 GeV/c). This detector system is key to LHCb's precision flavour physics programme, which has unique sensitivity to physics beyond the standard model. This paper reports on the performance of the LHCb RICH in Run II, following significant changes in the detector and operating conditions. The changes include the refurbishment of significant number of photon detectors, assembled using new vacuum technologies, and the removal of the aerogel radiator. The start of Run II of the LHC saw the beam energy increase to 6.5 TeV per beam and a new trigger strategy for LHCb with full online detector calibration. The RICH information has also been made available for all trigger streams in the High Level Trigger for the first time.

Storm Water Management Model User’s Manual Version 5.1 - manual

EPA Science Inventory

SWMM 5 provides an integrated environment for editing study area input data, running hydrologic, hydraulic and water quality simulations, and viewing the results in a variety of formats. These include color-coded drainage area and conveyance system maps, time series graphs and ta...

HAL/S-FC compiler system functional specification

NASA Technical Reports Server (NTRS)

1974-01-01

Compiler organization is discussed, including overall compiler structure, internal data transfer, compiler development, and code optimization. The user, system, and SDL interfaces are described, along with compiler system requirements. Run-time software support package and restrictions and dependencies are also considered of the HAL/S-FC system.

Velocity changes, long runs, and reversals in the Chromatium minus swimming response.

PubMed Central

Mitchell, J G; Martinez-Alonso, M; Lalucat, J; Esteve, I; Brown, S

1991-01-01

The velocity, run time, path curvature, and reorientation angle of Chromatium minus were measured as a function of light intensity, temperature, viscosity, osmotic pressure, and hydrogen sulfide concentration. C. minus changed both velocity and run time. Velocity decreased with increasing light intensity in sulfide-depleted cultures and increased in sulfide-replete cultures. The addition of sulfide to cultures grown at low light intensity (10 microeinsteins m-2 s-1) caused mean run times to increase from 10.5 to 20.6 s. The addition of sulfide to cultures grown at high light intensity (100 microeinsteins m-2 s-1) caused mean run times to decrease from 15.3 to 7.7 s. These changes were maintained for up to an hour and indicate that at least some members of the family Chromatiaceae simultaneously modulate velocity and turning frequency for extended periods as part of normal taxis. Images PMID:1991736

Purple L1 Milestone Review Panel TotalView Debugger Functionality and Performance for ASC Purple

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolfe, M

2006-12-12

ASC code teams require a robust software debugging tool to help developers quickly find bugs in their codes and get their codes running. Development debugging commonly runs up to 512 processes. Production jobs run up to full ASC Purple scale, and at times require introspection while running. Developers want a debugger that runs on all their development and production platforms and that works with all compilers and runtimes used with ASC codes. The TotalView Multiprocess Debugger made by Etnus was specified for ASC Purple to address this needed capability. The ASC Purple environment builds on the environment seen by TotalViewmore » on ASCI White. The debugger must now operate with the Power5 CPU, Federation switch, AIX 5.3 operating system including large pages, IBM compilers 7 and 9, POE 4.2 parallel environment, and rs6000 SLURM resource manager. Users require robust, basic debugger functionality with acceptable performance at development debugging scale. A TotalView installation must be provided at the beginning of the early user access period that meets these requirements. A functional enhancement, fast conditional data watchpoints, and a scalability enhancement, capability up to 8192 processes, are to be demonstrated.« less

Emotion recognition in girls with conduct problems.

PubMed

Schwenck, Christina; Gensthaler, Angelika; Romanos, Marcel; Freitag, Christine M; Schneider, Wolfgang; Taurines, Regina

2014-01-01

A deficit in emotion recognition has been suggested to underlie conduct problems. Although several studies have been conducted on this topic so far, most concentrated on male participants. The aim of the current study was to compare recognition of morphed emotional faces in girls with conduct problems (CP) with elevated or low callous-unemotional (CU+ vs. CU-) traits and a matched healthy developing control group (CG). Sixteen girls with CP-CU+, 16 girls with CP-CU- and 32 controls (mean age: 13.23 years, SD=2.33 years) were included. Video clips with morphed faces were presented in two runs to assess emotion recognition. Multivariate analysis of variance with the factors group and run was performed. Girls with CP-CU- needed more time than the CG to encode sad, fearful, and happy faces and they correctly identified sadness less often. Girls with CP-CU+ outperformed the other groups in the identification of fear. Learning effects throughout runs were the same for all groups except that girls with CP-CU- correctly identified fear less often in the second run compared to the first run. Results need to be replicated with comparable tasks, which might result in subgroup-specific therapeutic recommendations.

Personal best marathon time and longest training run, not anthropometry, predict performance in recreational 24-hour ultrarunners.

PubMed

Knechtle, Beat; Knechtle, Patrizia; Rosemann, Thomas; Lepers, Romuald

2011-08-01

In recent studies, a relationship between both low body fat and low thicknesses of selected skinfolds has been demonstrated for running performance of distances from 100 m to the marathon but not in ultramarathon. We investigated the association of anthropometric and training characteristics with race performance in 63 male recreational ultrarunners in a 24-hour run using bi and multivariate analysis. The athletes achieved an average distance of 146.1 (43.1) km. In the bivariate analysis, body mass (r = -0.25), the sum of 9 skinfolds (r = -0.32), the sum of upper body skinfolds (r = -0.34), body fat percentage (r = -0.32), weekly kilometers ran (r = 0.31), longest training session before the 24-hour run (r = 0.56), and personal best marathon time (r = -0.58) were related to race performance. Stepwise multiple regression showed that both the longest training session before the 24-hour run (p = 0.0013) and the personal best marathon time (p = 0.0015) had the best correlation with race performance. Performance in these 24-hour runners may be predicted (r2 = 0.46) by the following equation: Performance in a 24-hour run, km) = 234.7 + 0.481 (longest training session before the 24-hour run, km) - 0.594 (personal best marathon time, minutes). For practical applications, training variables such as volume and intensity were associated with performance but not anthropometric variables. To achieve maximum kilometers in a 24-hour run, recreational ultrarunners should have a personal best marathon time of ∼3 hours 20 minutes and complete a long training run of ∼60 km before the race, whereas anthropometric characteristics such as low body fat or low skinfold thicknesses showed no association with performance.

Relationship between 1.5-mile run time, injury risk and training outcome in British Army recruits.

PubMed

Hall, Lianne J

2017-12-01

1.5-mile run time, as a surrogate measure of aerobic fitness, is associated with musculoskeletal injury (MSI) risk in military recruits. This study aimed to determine if 1.5-mile run times can predict injury risk and attrition rates from phase 1 (initial) training and determine if a link exists between phase 1 and 2 discharge outcomes in British Army recruits. 1.5-mile times from week 1 of initial training and MSI reported during training were retrieved for 3446 male recruits. Run times were examined against injury occurrence and training outcomes for 3050 recruits, using a Binary Logistic Regression and χ 2 analysis. The 1.5-mile run can predict injury risk and phase 1 attrition rates (χ 2 (1)=59.3 p<0.001, χ 2 (1)=66.873 p<0.001). Slower 1.5-mile run times were associated with higher injury occurrence (χ 2 (1)=59.3 p<0.001) and reduced phase 1 ( χ 2 104.609 a p<0.001) and 2 (χ 2 84.978 a p<0.001) success. The 1.5-mile run can be used to guide a future standard that will in turn help reduce injury occurrence and improve training success. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

BeatBox-HPC simulation environment for biophysically and anatomically realistic cardiac electrophysiology.

PubMed

Antonioletti, Mario; Biktashev, Vadim N; Jackson, Adrian; Kharche, Sanjay R; Stary, Tomas; Biktasheva, Irina V

2017-01-01

The BeatBox simulation environment combines flexible script language user interface with the robust computational tools, in order to setup cardiac electrophysiology in-silico experiments without re-coding at low-level, so that cell excitation, tissue/anatomy models, stimulation protocols may be included into a BeatBox script, and simulation run either sequentially or in parallel (MPI) without re-compilation. BeatBox is a free software written in C language to be run on a Unix-based platform. It provides the whole spectrum of multi scale tissue modelling from 0-dimensional individual cell simulation, 1-dimensional fibre, 2-dimensional sheet and 3-dimensional slab of tissue, up to anatomically realistic whole heart simulations, with run time measurements including cardiac re-entry tip/filament tracing, ECG, local/global samples of any variables, etc. BeatBox solvers, cell, and tissue/anatomy models repositories are extended via robust and flexible interfaces, thus providing an open framework for new developments in the field. In this paper we give an overview of the BeatBox current state, together with a description of the main computational methods and MPI parallelisation approaches.

NSTX-U Advances in Real-Time C++11 on Linux

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Keith G.

Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore » serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less

NSTX-U Advances in Real-Time C++11 on Linux

DOE PAGES

Erickson, Keith G.

2015-08-14

Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore » serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less

Effect of match-run frequencies on the number of transplants and waiting times in kidney exchange.

PubMed

Ashlagi, Itai; Bingaman, Adam; Burq, Maximilien; Manshadi, Vahideh; Gamarnik, David; Murphey, Cathi; Roth, Alvin E; Melcher, Marc L; Rees, Michael A

2018-05-01

Numerous kidney exchange (kidney paired donation [KPD]) registries in the United States have gradually shifted to high-frequency match-runs, raising the question of whether this harms the number of transplants. We conducted simulations using clinical data from 2 KPD registries-the Alliance for Paired Donation, which runs multihospital exchanges, and Methodist San Antonio, which runs single-center exchanges-to study how the frequency of match-runs impacts the number of transplants and the average waiting times. We simulate the options facing each of the 2 registries by repeated resampling from their historical pools of patient-donor pairs and nondirected donors, with arrival and departure rates corresponding to the historical data. We find that longer intervals between match-runs do not increase the total number of transplants, and that prioritizing highly sensitized patients is more effective than waiting longer between match-runs for transplanting highly sensitized patients. While we do not find that frequent match-runs result in fewer transplanted pairs, we do find that increasing arrival rates of new pairs improves both the fraction of transplanted pairs and waiting times. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.

Performance of VPIC on Trinity

NASA Astrophysics Data System (ADS)

Nystrom, W. D.; Bergen, B.; Bird, R. F.; Bowers, K. J.; Daughton, W. S.; Guo, F.; Li, H.; Nam, H. A.; Pang, X.; Rust, W. N., III; Wohlbier, J.; Yin, L.; Albright, B. J.

2016-10-01

Trinity is a new major DOE computing resource which is going through final acceptance testing at Los Alamos National Laboratory. Trinity has several new and unique architectural features including two compute partitions, one with dual socket Intel Haswell Xeon compute nodes and one with Intel Knights Landing (KNL) Xeon Phi compute nodes. Additional unique features include use of on package high bandwidth memory (HBM) for the KNL nodes, the ability to configure the KNL nodes with respect to HBM model and on die network topology in a variety of operational modes at run time, and use of solid state storage via burst buffer technology to reduce time required to perform I/O. An effort is in progress to port and optimize VPIC to Trinity and evaluate its performance. Because VPIC was recently released as Open Source, it is being used as part of acceptance testing for Trinity and is participating in the Trinity Open Science Program which has resulted in excellent collaboration activities with both Cray and Intel. Results of this work will be presented on performance of VPIC on both Haswell and KNL partitions for both single node runs and runs at scale. Work performed under the auspices of the U.S. Dept. of Energy by the Los Alamos National Security, LLC Los Alamos National Laboratory under contract DE-AC52-06NA25396 and supported by the LANL LDRD program.

Low-cost real-time 3D PC distributed-interactive-simulation (DIS) application for C4I

NASA Astrophysics Data System (ADS)

Gonthier, David L.; Veron, Harry

1998-04-01

A 3D Distributed Interactive Simulation (DIS) application was developed and demonstrated in a PC environment. The application is capable of running in the stealth mode or as a player which includes battlefield simulations, such as ModSAF. PCs can be clustered together, but not necessarily collocated, to run a simulation or training exercise on their own. A 3D perspective view of the battlefield is displayed that includes terrain, trees, buildings and other objects supported by the DIS application. Screen update rates of 15 to 20 frames per second have been achieved with fully lit and textured scenes thus providing high quality and fast graphics. A complete PC system can be configured for under $2,500. The software runs under Windows95 and WindowsNT. It is written in C++ and uses a commercial API called RenderWare for 3D rendering. The software uses Microsoft Foundation classes and Microsoft DirectPlay for joystick input. The RenderWare libraries enhance the performance through optimization for MMX and the Pentium Pro processor. The RenderWare and the Righteous 3D graphics board from Orchid Technologies with an advertised rendering rate of up to 2 million texture mapped triangles per second. A low-cost PC DIS simulator that can partake in a real-time collaborative simulation with other platforms is thus achieved.

Walking, running, and resting under time, distance, and average speed constraints: optimality of walk–run–rest mixtures

PubMed Central

Long, Leroy L.; Srinivasan, Manoj

2013-01-01

On a treadmill, humans switch from walking to running beyond a characteristic transition speed. Here, we study human choice between walking and running in a more ecological (non-treadmill) setting. We asked subjects to travel a given distance overground in a given allowed time duration. During this task, the subjects carried, and could look at, a stopwatch that counted down to zero. As expected, if the total time available were large, humans walk the whole distance. If the time available were small, humans mostly run. For an intermediate total time, humans often use a mixture of walking at a slow speed and running at a higher speed. With analytical and computational optimization, we show that using a walk–run mixture at intermediate speeds and a walk–rest mixture at the lowest average speeds is predicted by metabolic energy minimization, even with costs for transients—a consequence of non-convex energy curves. Thus, sometimes, steady locomotion may not be energy optimal, and not preferred, even in the absence of fatigue. Assuming similar non-convex energy curves, we conjecture that similar walk–run mixtures may be energetically beneficial to children following a parent and animals on long leashes. Humans and other animals might also benefit energetically from alternating between moving forward and standing still on a slow and sufficiently long treadmill. PMID:23365192

Foot strike patterns of runners at the 15-km point during an elite-level half marathon.

PubMed

Hasegawa, Hiroshi; Yamauchi, Takeshi; Kraemer, William J

2007-08-01

There are various recommendations by many coaches regarding foot landing techniques in distance running that are meant to improve running performance and prevent injuries. Several studies have investigated the kinematic and kinetic differences between rearfoot strike (RFS), midfoot strike (MFS), and forefoot strike (FFS) patterns at foot landing and their effects on running efficiency on a treadmill and over ground conditions. However, little is known about the actual condition of the foot strike pattern during an actual road race at the elite level of competition. The purpose of the present study was to document actual foot strike patterns during a half marathon in which elite international level runners, including Olympians, compete. Four hundred fifteen runners were filmed by 2 120-Hz video cameras in the height of 0.15 m placed at the 15.0-km point and obtained sagittal foot landing and taking off images for 283 runners. Rearfoot strike was observed in 74.9% of all analyzed runners, MFS in 23.7%, and FFS in 1.4%. The percentage of MFS was higher in the faster runners group, when all runners were ranked and divided into 50 runner groups at the 15.0-km point of the competition. In the top 50, which included up to the 69th place runner in actual order who passed the 15-km point at 45 minutes, 53 second (this speed represents 5.45 m x s(-1), or 15 minutes, 17 seconds per 5 km), RFS, MFS, and FFS were 62.0, 36.0, and 2.0%, respectively. Contact time (CT) clearly increased for the slower runners, or the placement order increased (r = 0.71, p < or = 0.05). The CT for RFS + FFS for every 50 runners group significantly increased with increase of the placement order. The CT for RFS was significantly longer than MFS + FFS (200.0 +/- 21.3 vs. 183.0 +/- 16 millisecond). Apparent inversion (INV) of the foot at the foot strike was observed in 42% of all runners. The percentage of INV for MFS was higher than for RFS and FFS (62.5, 32.0, and 50%, respectively). The CT with INV for MFS + FFS was significantly shorter than the CT with and without INV for RFS. Furthermore, the CT with INV was significantly shorter than push-off time without INV for RFS. The findings of this study indicate that foot strike patterns are related to running speed. The percentage of RFS increases with the decreasing of the running speed; conversely, the percentage of MFS increases as the running speed increases. A shorter contact time and a higher frequency of inversion at the foot contact might contribute to higher running economy.

Lower-volume muscle-damaging exercise protects against high-volume muscle-damaging exercise and the detrimental effects on endurance performance.

PubMed

Burt, Dean; Lamb, Kevin; Nicholas, Ceri; Twist, Craig

2015-07-01

This study examined whether lower-volume exercise-induced muscle damage (EIMD) performed 2 weeks before high-volume muscle-damaging exercise protects against its detrimental effect on running performance. Sixteen male participants were randomly assigned to a lower-volume (five sets of ten squats, n = 8) or high-volume (ten sets of ten squats, n = 8) EIMD group and completed baseline measurements for muscle soreness, knee extensor torque, creatine kinase (CK), a 5-min fixed-intensity running bout and a 3-km running time-trial. Measurements were repeated 24 and 48 h after EIMD, and the running time-trial after 48 h. Two weeks later, both groups repeated the baseline measurements, ten sets of ten squats and the same follow-up testing (Bout 2). Data analysis revealed increases in muscle soreness and CK and decreases in knee extensor torque 24-48 h after the initial bouts of EIMD. Increases in oxygen uptake [Formula: see text], minute ventilation [Formula: see text] and rating of perceived exertion were observed during fixed-intensity running 24-48 h after EIMD Bout 1. Likewise, time increased and speed and [Formula: see text] decreased during a 3-km running time-trial 48 h after EIMD. Symptoms of EIMD, responses during fixed-intensity and running time-trial were attenuated in the days after the repeated bout of high-volume EIMD performed 2 weeks after the initial bout. This study demonstrates that the protective effect of lower-volume EIMD on subsequent high-volume EIMD is transferable to endurance running. Furthermore, time-trial performance was found to be preserved after a repeated bout of EIMD.

Real­-Time Ensemble Forecasting of Coronal Mass Ejections Using the Wsa-Enlil+Cone Model

NASA Astrophysics Data System (ADS)

Mays, M. L.; Taktakishvili, A.; Pulkkinen, A. A.; Odstrcil, D.; MacNeice, P. J.; Rastaetter, L.; LaSota, J. A.

2014-12-01

Ensemble forecasting of coronal mass ejections (CMEs) provides significant information in that it provides an estimation of the spread or uncertainty in CME arrival time predictions. Real-time ensemble modeling of CME propagation is performed by forecasters at the Space Weather Research Center (SWRC) using the WSA-ENLIL+cone model available at the Community Coordinated Modeling Center (CCMC). To estimate the effect of uncertainties in determining CME input parameters on arrival time predictions, a distribution of n (routinely n=48) CME input parameter sets are generated using the CCMC Stereo CME Analysis Tool (StereoCAT) which employs geometrical triangulation techniques. These input parameters are used to perform n different simulations yielding an ensemble of solar wind parameters at various locations of interest, including a probability distribution of CME arrival times (for hits), and geomagnetic storm strength (for Earth-directed hits). We present the results of ensemble simulations for a total of 38 CME events in 2013-2014. For 28 of the ensemble runs containing hits, the observed CME arrival was within the range of ensemble arrival time predictions for 14 runs (half). The average arrival time prediction was computed for each of the 28 ensembles predicting hits and using the actual arrival time, an average absolute error of 10.0 hours (RMSE=11.4 hours) was found for all 28 ensembles, which is comparable to current forecasting errors. Some considerations for the accuracy of ensemble CME arrival time predictions include the importance of the initial distribution of CME input parameters, particularly the mean and spread. When the observed arrivals are not within the predicted range, this still allows the ruling out of prediction errors caused by tested CME input parameters. Prediction errors can also arise from ambient model parameters such as the accuracy of the solar wind background, and other limitations. Additionally the ensemble modeling sysem was used to complete a parametric event case study of the sensitivity of the CME arrival time prediction to free parameters for ambient solar wind model and CME. The parameter sensitivity study suggests future directions for the system, such as running ensembles using various magnetogram inputs to the WSA model.

Effect of cycle run time of backwash and relaxation on membrane fouling removal in submerged membrane bioreactor treating sewage at higher flux.

PubMed

Tabraiz, Shamas; Haydar, Sajjad; Sallis, Paul; Nasreen, Sadia; Mahmood, Qaisar; Awais, Muhammad; Acharya, Kishor

2017-08-01

Intermittent backwashing and relaxation are mandatory in the membrane bioreactor (MBR) for its effective operation. The objective of the current study was to evaluate the effects of run-relaxation and run-backwash cycle time on fouling rates. Furthermore, comparison of the effects of backwashing and relaxation on the fouling behavior of membrane in high rate submerged MBR. The study was carried out on a laboratory scale MBR at high flux (30 L/m 2 ·h), treating sewage. The MBR was operated at three relaxation operational scenarios by keeping the run time to relaxation time ratio constant. Similarly, the MBR was operated at three backwashing operational scenarios by keeping the run time to backwashing time ratio constant. The results revealed that the provision of relaxation or backwashing at small intervals prolonged the MBR operation by reducing fouling rates. The cake and pores fouling rates in backwashing scenarios were far less as compared to the relaxation scenarios, which proved backwashing a better option as compared to relaxation. The operation time of backwashing scenario (lowest cycle time) was 64.6% and 21.1% more as compared to continuous scenario and relaxation scenario (lowest cycle time), respectively. Increase in cycle time increased removal efficiencies insignificantly, in both scenarios of relaxation and backwashing.

Creation of a retrospective job-exposure matrix using surrogate measures of exposure for a cohort of US career firefighters from San Francisco, Chicago and Philadelphia

PubMed Central

Dahm, Matthew M; Bertke, Stephen; Allee, Steve; Daniels, Robert D

2015-01-01

Objectives To construct a cohort-specific job-exposure matrix (JEM) using surrogate metrics of exposure for a cancer study on career firefighters from the Chicago, Philadelphia and San Francisco Fire Departments. Methods Departmental work history records, along with data on historical annual fire-runs and hours, were collected from 1950 to 2009 and coded into separate databases. These data were used to create a JEM based on standardised job titles and fire apparatus assignments using several surrogate exposure metrics to estimate firefighters’ exposure to the combustion byproducts of fire. The metrics included duration of exposure (cumulative time with a standardised exposed job title and assignment), fire-runs (cumulative events of potential fire exposure) and time at fire (cumulative hours of potential fire exposure). Results The JEM consisted of 2298 unique job titles alongside 16 174 fire apparatus assignments from the three departments, which were collapsed into 15 standardised job titles and 15 standardised job assignments. Correlations were found between fire-runs and time at fires (Pearson coefficient=0.92), duration of exposure and time at fires (Pearson coefficient=0.85), and duration of exposure and fire-runs (Pearson coefficient=0.82). Total misclassification rates were found to be between 16–30% when using duration of employment as an exposure surrogate, which has been traditionally used in most epidemiological studies, compared with using the duration of exposure surrogate metric. Conclusions The constructed JEM successfully differentiated firefighters based on gradient levels of potential exposure to the combustion byproducts of fire using multiple surrogate exposure metrics. PMID:26163543

Creation of a retrospective job-exposure matrix using surrogate measures of exposure for a cohort of US career firefighters from San Francisco, Chicago and Philadelphia.

PubMed

Dahm, Matthew M; Bertke, Stephen; Allee, Steve; Daniels, Robert D

2015-09-01

To construct a cohort-specific job-exposure matrix (JEM) using surrogate metrics of exposure for a cancer study on career firefighters from the Chicago, Philadelphia and San Francisco Fire Departments. Departmental work history records, along with data on historical annual fire-runs and hours, were collected from 1950 to 2009 and coded into separate databases. These data were used to create a JEM based on standardised job titles and fire apparatus assignments using several surrogate exposure metrics to estimate firefighters' exposure to the combustion byproducts of fire. The metrics included duration of exposure (cumulative time with a standardised exposed job title and assignment), fire-runs (cumulative events of potential fire exposure) and time at fire (cumulative hours of potential fire exposure). The JEM consisted of 2298 unique job titles alongside 16,174 fire apparatus assignments from the three departments, which were collapsed into 15 standardised job titles and 15 standardised job assignments. Correlations were found between fire-runs and time at fires (Pearson coefficient=0.92), duration of exposure and time at fires (Pearson coefficient=0.85), and duration of exposure and fire-runs (Pearson coefficient=0.82). Total misclassification rates were found to be between 16-30% when using duration of employment as an exposure surrogate, which has been traditionally used in most epidemiological studies, compared with using the duration of exposure surrogate metric. The constructed JEM successfully differentiated firefighters based on gradient levels of potential exposure to the combustion byproducts of fire using multiple surrogate exposure metrics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

PARLO: PArallel Run-Time Layout Optimization for Scientific Data Explorations with Heterogeneous Access Pattern

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong, Zhenhuan; Boyuka, David; Zou, X

Download Citation Email Print Request Permissions Save to Project The size and scope of cutting-edge scientific simulations are growing much faster than the I/O and storage capabilities of their run-time environments. The growing gap is exacerbated by exploratory, data-intensive analytics, such as querying simulation data with multivariate, spatio-temporal constraints, which induces heterogeneous access patterns that stress the performance of the underlying storage system. Previous work addresses data layout and indexing techniques to improve query performance for a single access pattern, which is not sufficient for complex analytics jobs. We present PARLO a parallel run-time layout optimization framework, to achieve multi-levelmore » data layout optimization for scientific applications at run-time before data is written to storage. The layout schemes optimize for heterogeneous access patterns with user-specified priorities. PARLO is integrated with ADIOS, a high-performance parallel I/O middleware for large-scale HPC applications, to achieve user-transparent, light-weight layout optimization for scientific datasets. It offers simple XML-based configuration for users to achieve flexible layout optimization without the need to modify or recompile application codes. Experiments show that PARLO improves performance by 2 to 26 times for queries with heterogeneous access patterns compared to state-of-the-art scientific database management systems. Compared to traditional post-processing approaches, its underlying run-time layout optimization achieves a 56% savings in processing time and a reduction in storage overhead of up to 50%. PARLO also exhibits a low run-time resource requirement, while also limiting the performance impact on running applications to a reasonable level.« less

Watershed Characteristics and Pre-Restoration Surface-Water Hydrology of Minebank Run, Baltimore County, Maryland, Water Years 2002-04

USGS Publications Warehouse

Doheny, Edward J.; Starsoneck, Roger J.; Striz, Elise A.; Mayer, Paul M.

2006-01-01

Stream restoration efforts have been ongoing in Maryland since the early 1990s. Physical stream restoration often involves replacement of lost sediments to elevate degraded streambeds, re-establishment of riffle-pool sequences along the channel profile, planting vegetation in riparian zones, and re-constructing channel banks, point bars, flood plains, and stream-meanders. The primary goal of many restoration efforts is to re-establish geomorphic stability of the stream channel and reduce erosive energy from urban runoff. Monitoring streams prior to and after restoration could help quantify other possible benefits of stream restoration, such as improved water quality and biota. This report presents general watershed characteristics associated with the Minebank Run watershed; a small, urban watershed in the south-central section of Baltimore County, Maryland that was physically restored in phases during 1999, 2004, and 2005. The physiography, geology, hydrology, land use, soils, and pre-restoration geomorphic setting of the unrestored stream channel are discussed. The report describes a reach of Minebank Run that was selected for the purpose of collecting several types of environmental data prior to restoration, including continuous-record and partial-record stage and streamflow data, precipitation, and ground-water levels. Examples of surface-water data that were collected in and near the study reach during water years 2002 through 2004, including continuous-record streamflow, partial-record stage and discharge, and precipitation, are described. These data were used in analyses of several characteristics of surface-water hydrology in the watershed, including (1) rainfall totals, storm duration, and intensity, (2) instantaneous peak discharge and daily mean discharge, (3) stage-discharge ratings, (4) hydraulic-geometry relations, (5) water-surface slope, (6) time of concentration, (7) flood frequency, (8) flood volume, and (9) rainfall-runoff relations. Several hydrologic characteristics that are typical of urban environments were quantified by these analyses. These include (1) large ratios of peak discharge to daily mean discharge as an indicator of flashiness, (2) consistent shifting of the stage-discharge rating over short periods of time that indicates instability of the stream channel, (3) analyses of hydraulic-geometry relations that indicate mean velocities of 11 feet per second or more while the flow is contained in the stream channel, (4) discharges that are 4 to 5 times larger in Minebank Run for corresponding flood frequency recurrence intervals than in Slade Run, which is a Piedmont watershed of similar size with smaller percentages of urban development, and (5) flood waves that can travel through the stream channel at a velocity of 412 feet per minute, or 6.9 feet per second.

Running Performance While Wearing a Heat Dissipating Compression Garment in Male Recreational Runners.

PubMed

Leoz-Abaurrea, Iker; Santos-Concejero, Jordan; Grobler, Lara; Engelbrecht, Louise; Aguado-Jiménez, Roberto

2016-12-01

Leoz-Abaurrea, I, Santos-Concejero, J, Grobler, L, Engelbrecht, L, and Aguado-Jiménez, R. Running performance while wearing a heat dissipating compression garment in male recreational runners. J Strength Cond Res 30(12): 3367-3372, 2016-The aim of this study was to investigate the effects of a heat dissipating compression garment (CG) during a running performance test. Ten male recreational runners (mean ± SD: age 23 ± 3 years; V[Combining Dot Above]O2max 55.8 ± 4.8 ml·kg·min) completed 2 identical sessions wearing either CG or conventional t-shirt (CON). Each trial included a 45-minute run at 60% of the peak treadmill speed (PTS) followed by a time to exhaustion (TTE) run at 80% of the PTS and a 10-minute recovery period. During the tests, thermoregulatory and cardiovascular responses were monitored. Participants wearing the CG displayed an impaired running performance (508 ± 281 vs. 580 ± 314 seconds, p = 0.046; effect size [ES] = 0.24). In addition, a higher respiratory exchange ratio (1.06 ± 0.04 vs. 1.02 ± 0.07, p = 0.01; ES = 0.70) was observed at TTE when wearing the CG in comparison to CON. Changes in core temperature did not differ between garments after the 45-minute run (p = 0.96; ES = 0.03) or TTE (1.97 ± 0.32 vs. 1.98 ± 0.38° C; p = 0.93; ES = 0.02) for CG and CON, respectively. During recovery, significantly higher heart rate and blood lactate values were observed when wearing CG (p ≤ 0.05). These findings suggest that the use of a heat dissipating CG may not improve running performance in male recreational runners during a running performance test to exhaustion.

Attenuation of foot pressure during running on four different surfaces: asphalt, concrete, rubber, and natural grass.

PubMed

Tessutti, Vitor; Ribeiro, Ana Paula; Trombini-Souza, Francis; Sacco, Isabel C N

2012-01-01

The practice of running has consistently increased worldwide, and with it, related lower limb injuries. The type of running surface has been associated with running injury etiology, in addition other factors, such as the relationship between the amount and intensity of training. There is still controversy in the literature regarding the biomechanical effects of different types of running surfaces on foot-floor interaction. The aim of this study was to investigate the influence of running on asphalt, concrete, natural grass, and rubber on in-shoe pressure patterns in adult recreational runners. Forty-seven adult recreational runners ran twice for 40 m on all four different surfaces at 12 ± 5% km · h(-1). Peak pressure, pressure-time integral, and contact time were recorded by Pedar X insoles. Asphalt and concrete were similar for all plantar variables and pressure zones. Running on grass produced peak pressures 9.3% to 16.6% lower (P < 0.001) than the other surfaces in the rearfoot and 4.7% to 12.3% (P < 0.05) lower in the forefoot. The contact time on rubber was greater than on concrete for the rearfoot and midfoot. The behaviour of rubber was similar to that obtained for the rigid surfaces - concrete and asphalt - possibly because of its time of usage (five years). Running on natural grass attenuates in-shoe plantar pressures in recreational runners. If a runner controls the amount and intensity of practice, running on grass may reduce the total stress on the musculoskeletal system compared with the total musculoskeletal stress when running on more rigid surfaces, such as asphalt and concrete.

Nocturnal to Diurnal Switches with Spontaneous Suppression of Wheel-Running Behavior in a Subterranean Rodent

PubMed Central

Tachinardi, Patricia; Tøien, Øivind; Valentinuzzi, Veronica S.; Buck, C. Loren; Oda, Gisele A.

2015-01-01

Several rodent species that are diurnal in the field become nocturnal in the lab. It has been suggested that the use of running-wheels in the lab might contribute to this timing switch. This proposition is based on studies that indicate feed-back of vigorous wheel-running on the period and phase of circadian clocks that time daily activity rhythms. Tuco-tucos (Ctenomys aff. knighti) are subterranean rodents that are diurnal in the field but are robustly nocturnal in laboratory, with or without access to running wheels. We assessed their energy metabolism by continuously and simultaneously monitoring rates of oxygen consumption, body temperature, general motor and wheel running activity for several days in the presence and absence of wheels. Surprisingly, some individuals spontaneously suppressed running-wheel activity and switched to diurnality in the respirometry chamber, whereas the remaining animals continued to be nocturnal even after wheel removal. This is the first report of timing switches that occur with spontaneous wheel-running suppression and which are not replicated by removal of the wheel. PMID:26460828

Impact of water quality on chlorine demand of corroding copper.

PubMed

Lytle, Darren A; Liggett, Jennifer

2016-04-01

Copper is widely used in drinking water premise plumbing system materials. In buildings such as hospitals, large and complicated plumbing networks make it difficult to maintain good water quality. Sustaining safe disinfectant residuals throughout a building to protect against waterborne pathogens such as Legionella is particularly challenging since copper and other reactive distribution system materials can exert considerable demands. The objective of this work was to evaluate the impact of pH and orthophosphate on the consumption of free chlorine associated with corroding copper pipes over time. A copper test-loop pilot system was used to control test conditions and systematically meet the study objectives. Chlorine consumption trends attributed to abiotic reactions with copper over time were different for each pH condition tested, and the total amount of chlorine consumed over the test runs increased with increasing pH. Orthophosphate eliminated chlorine consumption trends with elapsed time (i.e., chlorine demand was consistent across entire test runs). Orthophosphate also greatly reduced the total amount of chlorine consumed over the test runs. Interestingly, the total amount of chlorine consumed and the consumption rate were not pH dependent when orthophosphate was present. The findings reflect the complex and competing reactions at the copper pipe wall including corrosion, oxidation of Cu(I) minerals and ions, and possible oxidation of Cu(II) minerals, and the change in chlorine species all as a function of pH. The work has practical applications for maintaining chlorine residuals in premise plumbing drinking water systems including large buildings such as hospitals. Published by Elsevier Ltd.

Promoting physical activity and fruit and vegetable consumption through a community-school partnership: the effects of Marathon Kids® on low-income elementary school children in Texas.

PubMed

Springer, Andrew E; Kelder, Steven H; Ranjit, Nalini; Hochberg-Garrett, Heather; Crow, Sherman; Delk, Joanne

2012-07-01

Marathon Kids® (MK) is a community and school-based program that promotes running, walking, and healthy eating in elementary school children. This study assessed the impact of MK on self-reported physical activity (PA), fruit and vegetable consumption (FVC), and related psycho-social factors in a sample of low-income, 4th- and 5th-grade students in Texas (n = 511). Intervention strategies included structured school running time, behavioral tracking, celebratory events, and rewards. A quasi-experimental design with 5 intervention (MK) and 3 comparison schools was employed. Students were assessed at baseline in the fall and at 3 time points during 2008 to 09. Mixed-effect regression methods were used to model pooled means, adjusting for baseline and sociodemographic variables. MK students reported a higher mean time of running in past 7 days compared with non-MK students (mean = 4.38 vs. 3.83, respectively. P = .002), with a standardized effect size of 0.16. Mean times of FVC (P = .008), athletic identity self-concept (P < .001), PA outcome expectations (P = .007), and PA and FVC self-efficacy (P < .001 and P = .02, respectively) were also higher in MK students. Fewer differences in social support were observed. Findings provide further evidence on the importance of community and school partnerships for promoting PA and healthy eating in children.

Can anti-gravity running improve performance to the same degree as over-ground running?

PubMed

Brennan, Christopher T; Jenkins, David G; Osborne, Mark A; Oyewale, Michael; Kelly, Vincent G

2018-03-11

This study examined the changes in running performance, maximal blood lactate concentrations and running kinematics between 85%BM anti-gravity (AG) running and normal over-ground (OG) running over an 8-week training period. Fifteen elite male developmental cricketers were assigned to either the AG or over-ground (CON) running group. The AG group (n = 7) ran twice a week on an AG treadmill and once per week over-ground. The CON group (n = 8) completed all sessions OG on grass. Both AG and OG training resulted in similar improvements in time trial and shuttle run performance. Maximal running performance showed moderate differences between the groups, however the AG condition resulted in less improvement. Large differences in maximal blood lactate concentrations existed with OG running resulting in greater improvements in blood lactate concentrations measured during maximal running. Moderate increases in stride length paired with moderate decreases in stride rate also resulted from AG training. The use of AG training to supplement regular OG training for performance should be used cautiously, as extended use over long periods of time could lead to altered stride mechanics and reduced blood lactate.

Scaling NS-3 DCE Experiments on Multi-Core Servers

DTIC Science & Technology

2016-06-15

that work well together. 3.2 Simulation Server Details We ran the simulations on a Dell® PowerEdge M520 blade server[8] running Ubuntu Linux 14.04...To minimize the amount of time needed to complete all of the simulations, we planned to run multiple simulations at the same time on a blade server...MacBook was running the simulation inside a virtual machine (Ubuntu 14.04), while the blade server was running the same operating system directly on

40 CFR Table 1a to Subpart Ce of... - Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Defined in § 60...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) (grains per dry standard cubic foot (gr/dscf)) 115 (0.05) 69 (0.03) 34 (0.015) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method...-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of appendix A-4 of...

40 CFR Table 1a to Subpart Ce of... - Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Defined in § 60...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) (grains per dry standard cubic foot (gr/dscf)) 115 (0.05) 69 (0.03) 34 (0.015) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method...-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of appendix A-4 of...

Regulation of step frequency in transtibial amputee endurance athletes using a running-specific prosthesis.

PubMed

Oudenhoven, Laura M; Boes, Judith M; Hak, Laura; Faber, Gert S; Houdijk, Han

2017-01-25

Running specific prostheses (RSP) are designed to replicate the spring-like behaviour of the human leg during running, by incorporating a real physical spring in the prosthesis. Leg stiffness is an important parameter in running as it is strongly related to step frequency and running economy. To be able to select a prosthesis that contributes to the required leg stiffness of the athlete, it needs to be known to what extent the behaviour of the prosthetic leg during running is dominated by the stiffness of the prosthesis or whether it can be regulated by adaptations of the residual joints. The aim of this study was to investigate whether and how athletes with an RSP could regulate leg stiffness during distance running at different step frequencies. Seven endurance runners with an unilateral transtibial amputation performed five running trials on a treadmill at a fixed speed, while different step frequencies were imposed (preferred step frequency (PSF) and -15%, -7.5%, +7.5% and +15% of PSF). Among others, step time, ground contact time, flight time, leg stiffness and joint kinetics were measured for both legs. In the intact leg, increasing step frequency was accompanied by a decrease in both contact and flight time, while in the prosthetic leg contact time remained constant and only flight time decreased. In accordance, leg stiffness increased in the intact leg, but not in the prosthetic leg. Although a substantial contribution of the residual leg to total leg stiffness was observed, this contribution did not change considerably with changing step frequency. Amputee athletes do not seem to be able to alter prosthetic leg stiffness to regulate step frequency during running. This invariant behaviour indicates that RSP stiffness has a large effect on total leg stiffness and therefore can have an important influence on running performance. Nevertheless, since prosthetic leg stiffness was considerably lower than stiffness of the RSP, compliance of the residual leg should not be ignored when selecting RSP stiffness. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sex differences in association of race performance, skin-fold thicknesses, and training variables for recreational half-marathon runners.

PubMed

Knechtle, Beat; Knechtle, Patrizia; Rosemann, Thomas; Senn, Oliver

2010-12-01

The purpose of this study was to investigate the association between selected skin-fold thicknesses and training variables with a half-marathon race time, for both male and female recreational runners, using bi- and multivariate analysis. In 52 men, two skin-fold thicknesses (abdominal and calf) were significantly and positively correlated with race time; whereas in 15 women, five (pectoral, mid-axilla, subscapular, abdominal, and suprailiac) showed positive and significant relations with total race time. In men, the mean weekly running distance, minimum distance run per week, maximum distance run per week, mean weekly hours of running, number of running training sessions per week, and mean speed of the training sessions were significantly and negatively related to total race time, but not in women. Interaction analyses suggested that race time was more strongly associated with anthropometry in women than men. Race time for the women was independently associated with the sum of eight skin-folds; but for the men, only the mean speed during training sessions was independently associated. Skin-fold thicknesses and training variables in these groups were differently related to race time according to their sex.

American Academy of Podiatric Sports Medicine

MedlinePlus

... Runblogger Running Product Reviews Running Research Junkie Running Times The ... © American Academy of Podiatric Sports Medicine Website Design, Maintenance and Hosting by Catalyst Marketing / Worry Free ...

Jumping and hopping in elite and amateur orienteering athletes and correlations to sprinting and running.

PubMed

Hébert-Losier, Kim; Jensen, Kurt; Holmberg, Hans-Christer

2014-11-01

Jumping and hopping are used to measure lower-body muscle power, stiffness, and stretch-shortening-cycle utilization in sports, with several studies reporting correlations between such measures and sprinting and/or running abilities in athletes. Neither jumping and hopping nor correlations with sprinting and/or running have been examined in orienteering athletes. The authors investigated squat jump (SJ), countermovement jump (CMJ), standing long jump (SLJ), and hopping performed by 8 elite and 8 amateur male foot-orienteering athletes (29 ± 7 y, 183 ± 5 cm, 73 ± 7 kg) and possible correlations to road, path, and forest running and sprinting performance, as well as running economy, velocity at anaerobic threshold, and peak oxygen uptake (VO(2peak)) from treadmill assessments. During SJs and CMJs, elites demonstrated superior relative peak forces, times to peak force, and prestretch augmentation, albeit lower SJ heights and peak powers. Between-groups differences were unclear for CMJ heights, hopping stiffness, and most SLJ parameters. Large pairwise correlations were observed between relative peak and time to peak forces and sprinting velocities; time to peak forces and running velocities; and prestretch augmentation and forest-running velocities. Prestretch augmentation and time to peak forces were moderately correlated to VO(2peak). Correlations between running economy and jumping or hopping were small or trivial. Overall, the elites exhibited superior stretch-shortening-cycle utilization and rapid generation of high relative maximal forces, especially vertically. These functional measures were more closely related to sprinting and/or running abilities, indicating benefits of lower-body training in orienteering.

Optimization of Primary Drying in Lyophilization during Early Phase Drug Development using a Definitive Screening Design with Formulation and Process Factors.

PubMed

Goldman, Johnathan M; More, Haresh T; Yee, Olga; Borgeson, Elizabeth; Remy, Brenda; Rowe, Jasmine; Sadineni, Vikram

2018-06-08

Development of optimal drug product lyophilization cycles is typically accomplished via multiple engineering runs to determine appropriate process parameters. These runs require significant time and product investments, which are especially costly during early phase development when the drug product formulation and lyophilization process are often defined simultaneously. Even small changes in the formulation may require a new set of engineering runs to define lyophilization process parameters. In order to overcome these development difficulties, an eight factor definitive screening design (DSD), including both formulation and process parameters, was executed on a fully human monoclonal antibody (mAb) drug product. The DSD enables evaluation of several interdependent factors to define critical parameters that affect primary drying time and product temperature. From these parameters, a lyophilization development model is defined where near optimal process parameters can be derived for many different drug product formulations. This concept is demonstrated on a mAb drug product where statistically predicted cycle responses agree well with those measured experimentally. This design of experiments (DoE) approach for early phase lyophilization cycle development offers a workflow that significantly decreases the development time of clinically and potentially commercially viable lyophilization cycles for a platform formulation that still has variable range of compositions. Copyright © 2018. Published by Elsevier Inc.

A portable pattern-based design technology co-optimization flow to reduce optical proximity correction run-time

NASA Astrophysics Data System (ADS)

Chen, Yi-Chieh; Li, Tsung-Han; Lin, Hung-Yu; Chen, Kao-Tun; Wu, Chun-Sheng; Lai, Ya-Chieh; Hurat, Philippe

2018-03-01

Along with process improvement and integrated circuit (IC) design complexity increased, failure rate caused by optical getting higher in the semiconductor manufacture. In order to enhance chip quality, optical proximity correction (OPC) plays an indispensable rule in the manufacture industry. However, OPC, includes model creation, correction, simulation and verification, is a bottleneck from design to manufacture due to the multiple iterations and advanced physical behavior description in math. Thus, this paper presented a pattern-based design technology co-optimization (PB-DTCO) flow in cooperation with OPC to find out patterns which will negatively affect the yield and fixed it automatically in advance to reduce the run-time in OPC operation. PB-DTCO flow can generate plenty of test patterns for model creation and yield gaining, classify candidate patterns systematically and furthermore build up bank includes pairs of match and optimization patterns quickly. Those banks can be used for hotspot fixing, layout optimization and also be referenced for the next technology node. Therefore, the combination of PB-DTCO flow with OPC not only benefits for reducing the time-to-market but also flexible and can be easily adapted to diversity OPC flow.

Using a virtual world for robot planning

NASA Astrophysics Data System (ADS)

Benjamin, D. Paul; Monaco, John V.; Lin, Yixia; Funk, Christopher; Lyons, Damian

2012-06-01

We are building a robot cognitive architecture that constructs a real-time virtual copy of itself and its environment, including people, and uses the model to process perceptual information and to plan its movements. This paper describes the structure of this architecture. The software components of this architecture include PhysX for the virtual world, OpenCV and the Point Cloud Library for visual processing, and the Soar cognitive architecture that controls the perceptual processing and task planning. The RS (Robot Schemas) language is implemented in Soar, providing the ability to reason about concurrency and time. This Soar/RS component controls visual processing, deciding which objects and dynamics to render into PhysX, and the degree of detail required for the task. As the robot runs, its virtual model diverges from physical reality, and errors grow. The Match-Mediated Difference component monitors these errors by comparing the visual data with corresponding data from virtual cameras, and notifies Soar/RS of significant differences, e.g. a new object that appears, or an object that changes direction unexpectedly. Soar/RS can then run PhysX much faster than real-time and search among possible future world paths to plan the robot's actions. We report experimental results in indoor environments.

The use of a running wheel to measure activity in rodents: relationship to energy balance, general activity, and reward.

PubMed

Novak, Colleen M; Burghardt, Paul R; Levine, James A

2012-03-01

Running wheels are commonly employed to measure rodent physical activity in a variety of contexts, including studies of energy balance and obesity. There is no consensus on the nature of wheel-running activity or its underlying causes, however. Here, we will begin by systematically reviewing how running wheel availability affects physical activity and other aspects of energy balance in laboratory rodents. While wheel running and physical activity in the absence of a wheel commonly correlate in a general sense, in many specific aspects the two do not correspond. In fact, the presence of running wheels alters several aspects of energy balance, including body weight and composition, food intake, and energy expenditure of activity. We contend that wheel-running activity should be considered a behavior in and of itself, reflecting several underlying behavioral processes in addition to a rodent's general, spontaneous activity. These behavioral processes include defensive behavior, predatory aggression, and depression- and anxiety-like behaviors. As it relates to energy balance, wheel running engages several brain systems-including those related to the stress response, mood, and reward, and those responsive to growth factors-that influence energy balance indirectly. We contend that wheel-running behavior represents factors in addition to rodents' tendency to be physically active, engaging additional neural and physiological mechanisms which can then independently alter energy balance and behavior. Given the impact of wheel-running behavior on numerous overlapping systems that influence behavior and physiology, this review outlines the need for careful design and interpretation of studies that utilize running wheels as a means for exercise or as a measurement of general physical activity. Copyright © 2012 Elsevier Ltd. All rights reserved.

The use of a running wheel to measure activity in rodents: Relationship to energy balance, general activity, and reward

PubMed Central

Levine, James A.

2015-01-01

Running wheels are commonly employed to measure rodent physical activity in a variety of contexts, including studies of energy balance and obesity. There is no consensus on the nature of wheel-running activity or its underlying causes, however. Here, we will begin by systematically reviewing how running wheel availability affects physical activity and other aspects of energy balance in laboratory rodents. While wheel running and physical activity in the absence of a wheel commonly correlate in a general sense, in many specific aspects the two do not correspond. In fact, the presence of running wheels alters several aspects of energy balance, including body weight and composition, food intake, and energy expenditure of activity. We contend that wheel-running activity should be considered a behavior in and of itself, reflecting several underlying behavioral processes in addition to a rodent's general, spontaneous activity. These behavioral processes include defensive behavior, predatory aggression, and depression- and anxiety-like behaviors. As it relates to energy balance, wheel running engages several brain systems—including those related to the stress response, mood, and reward, and those responsive to growth factors—that influence energy balance indirectly. We contend that wheel-running behavior represents factors in addition to rodents' tendency to be physically active, engaging additional neural and physiological mechanisms which can then independently alter energy balance and behavior. Given the impact of wheel-running behavior on numerous overlapping systems that influence behavior and physiology, this review outlines the need for careful design and interpretation of studies that utilize running wheels as a means for exercise or as a measurement of general physical activity. PMID:22230703

Short-term changes in running mechanics and foot strike pattern after introduction to minimalistic footwear.

PubMed

Willson, John D; Bjorhus, Jordan S; Williams, D S Blaise; Butler, Robert J; Porcari, John P; Kernozek, Thomas W

2014-01-01

Minimalistic footwear has garnered widespread interest in the running community, based largely on the premise that the footwear may reduce certain running-related injury risk factors through adaptations in running mechanics and foot strike pattern. To examine short-term adaptations in running mechanics among runners who typically run in conventional cushioned heel running shoes as they transition to minimalistic footwear. A 2-week, prospective, observational study. A movement science laboratory. Nineteen female runners with a rear foot strike (RFS) pattern who usually train in conventional running shoes. The participants trained for 20 minutes, 3 times per week for 2 weeks by using minimalistic footwear. Three-dimensional lower extremity running mechanics were analyzed before and after this 2-week period. Hip, knee, and ankle joint kinematics at initial contact; step length; stance time; peak ankle joint moment and joint work; impact peak; vertical ground reaction force loading rate; and foot strike pattern preference were evaluated before and after the intervention. The knee flexion angle at initial contact increased 3.8° (P < .01), but the ankle and hip flexion angles at initial contact did not change after training. No changes in ankle joint kinetics or running temporospatial parameters were observed. The majority of participants (71%), before the intervention, demonstrated an RFS pattern while running in minimalistic footwear. The proportion of runners with an RFS pattern did not decrease after 2 weeks (P = .25). Those runners who chose an RFS pattern in minimalistic shoes experienced a vertical loading rate that was 3 times greater than those who chose to run with a non-RFS pattern. Few systematic changes in running mechanics were observed among participants after 2 weeks of training in minimalistic footwear. The majority of the participants continued to use an RFS pattern after training in minimalistic footwear, and these participants experienced higher vertical loading rates. Continued exposure to these greater loading rates may have detrimental effects over time. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

77 FR 60165 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Order Approving Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... Time at Which the Mortgage-Backed Securities Division Runs Its Daily Morning Pass September 26, 2012. I... FICC proposes to move the time at which its Mortgage-Backed Securities Division (``MBSD'') runs its... processing passes. MBSD currently runs its first processing pass of the day (historically referred to as the...

Effect of Light/Dark Cycle on Wheel Running and Responding Reinforced by the Opportunity to Run Depends on Postsession Feeding Time

ERIC Educational Resources Information Center

Belke, T. W.; Mondona, A. R.; Conrad, K. M.; Poirier, K. F.; Pickering, K. L.

2008-01-01

Do rats run and respond at a higher rate to run during the dark phase when they are typically more active? To answer this question, Long Evans rats were exposed to a response-initiated variable interval 30-s schedule of wheel-running reinforcement during light and dark cycles. Wheel-running and local lever-pressing rates increased modestly during…

Lower-body determinants of running economy in male and female distance runners.

PubMed

Barnes, Kyle R; Mcguigan, Michael R; Kilding, Andrew E

2014-05-01

A variety of training approaches have been shown to improve running economy in well-trained athletes. However, there is a paucity of data exploring lower-body determinants that may affect running economy and account for differences that may exist between genders. Sixty-three male and female distance runners were assessed in the laboratory for a range of metabolic, biomechanical, and neuromuscular measures potentially related to running economy (ml·kg(-1)·min(-1)) at a range of running speeds. At all common test velocities, women were more economical than men (effect size [ES] = 0.40); however, when compared in terms of relative intensity, men had better running economy (ES = 2.41). Leg stiffness (r = -0.80) and moment arm length (r = 0.90) were large-extremely largely correlated with running economy and each other (r = -0.82). Correlations between running economy and kinetic measures (peak force, peak power, and time to peak force) for both genders were unclear. The relationship in stride rate (r = -0.27 to -0.31) was in the opposite direction to that of stride length (r = 0.32-0.49), and the relationship in contact time (r = -0.21 to -0.54) was opposite of that of flight time (r = 0.06-0.74). Although both leg stiffness and moment arm length are highly related to running economy, it seems that no single lower-body measure can completely explain differences in running economy between individuals or genders. Running economy is therefore likely determined from the sum of influences from multiple lower-body attributes.

Scientific Benefits of Space Science Models Archiving at Community Coordinated Modeling Center

NASA Technical Reports Server (NTRS)

Kuznetsova, Maria M.; Berrios, David; Chulaki, Anna; Hesse, Michael; MacNeice, Peter J.; Maddox, Marlo M.; Pulkkinen, Antti; Rastaetter, Lutz; Taktakishvili, Aleksandre

2009-01-01

The Community Coordinated Modeling Center (CCMC) hosts a set of state-of-the-art space science models ranging from the solar atmosphere to the Earth's upper atmosphere. CCMC provides a web-based Run-on-Request system, by which the interested scientist can request simulations for a broad range of space science problems. To allow the models to be driven by data relevant to particular events CCMC developed a tool that automatically downloads data from data archives and transform them to required formats. CCMC also provides a tailored web-based visualization interface for the model output, as well as the capability to download the simulation output in portable format. CCMC offers a variety of visualization and output analysis tools to aid scientists in interpretation of simulation results. During eight years since the Run-on-request system became available the CCMC archived the results of almost 3000 runs that are covering significant space weather events and time intervals of interest identified by the community. The simulation results archived at CCMC also include a library of general purpose runs with modeled conditions that are used for education and research. Archiving results of simulations performed in support of several Modeling Challenges helps to evaluate the progress in space weather modeling over time. We will highlight the scientific benefits of CCMC space science model archive and discuss plans for further development of advanced methods to interact with simulation results.

Distribution, stock composition and timing, and tagging response of wild Chinook Salmon returning to a large, free-flowing river basin

USGS Publications Warehouse

Eiler, John H.; Masuda, Michele; Spencer, Ted R.; Driscoll, Richard J.; Schreck, Carl B.

2014-01-01

Chinook Salmon Oncorhynchus tshawytscha returns to the Yukon River basin have declined dramatically since the late 1990s, and detailed information on the spawning distribution, stock structure, and stock timing is needed to better manage the run and facilitate conservation efforts. A total of 2,860 fish were radio-tagged in the lower basin during 2002–2004 and tracked upriver. Fish traveled to spawning areas throughout the basin, ranging from several hundred to over 3,000 km from the tagging site. Similar distribution patterns were observed across years, suggesting that the major components of the run were identified. Daily and seasonal composition estimates were calculated for the component stocks. The run was dominated by two regional components comprising over 70% of the return. Substantially fewer fish returned to other areas, ranging from 2% to 9% of the return, but their collective contribution was appreciable. Most regional components consisted of several principal stocks and a number of small, spatially isolated populations. Regional and stock composition estimates were similar across years even though differences in run abundance were reported, suggesting that the differences in abundance were not related to regional or stock-specific variability. Run timing was relatively compressed compared with that in rivers in the southern portion of the species’ range. Most stocks passed through the lower river over a 6-week period, ranging in duration from 16 to 38 d. Run timing was similar for middle- and upper-basin stocks, limiting the use of timing information for management. The lower-basin stocks were primarily later-run fish. Although differences were observed, there was general agreement between our composition and timing estimates and those from other assessment projects within the basin, suggesting that the telemetry-based estimates provided a plausible approximation of the return. However, the short duration of the run, complex stock structure, and similar stock timing complicate management of Yukon River returns.

Weather model performance on extreme rainfall events simulation's over Western Iberian Peninsula

NASA Astrophysics Data System (ADS)

Pereira, S. C.; Carvalho, A. C.; Ferreira, J.; Nunes, J. P.; Kaiser, J. J.; Rocha, A.

2012-08-01

This study evaluates the performance of the WRF-ARW numerical weather model in simulating the spatial and temporal patterns of an extreme rainfall period over a complex orographic region in north-central Portugal. The analysis was performed for the December month of 2009, during the Portugal Mainland rainy season. The heavy rainfall to extreme heavy rainfall periods were due to several low surface pressure's systems associated with frontal surfaces. The total amount of precipitation for December exceeded, in average, the climatological mean for the 1971-2000 time period in +89 mm, varying from 190 mm (south part of the country) to 1175 mm (north part of the country). Three model runs were conducted to assess possible improvements in model performance: (1) the WRF-ARW is forced with the initial fields from a global domain model (RunRef); (2) data assimilation for a specific location (RunObsN) is included; (3) nudging is used to adjust the analysis field (RunGridN). Model performance was evaluated against an observed hourly precipitation dataset of 15 rainfall stations using several statistical parameters. The WRF-ARW model reproduced well the temporal rainfall patterns but tended to overestimate precipitation amounts. The RunGridN simulation provided the best results but model performance of the other two runs was good too, so that the selected extreme rainfall episode was successfully reproduced.

Understanding key performance indicators for breast support: An analysis of breast support effects on biomechanical, physiological and subjective measures during running.

PubMed

Risius, Debbie; Milligan, Alexandra; Berns, Jason; Brown, Nicola; Scurr, Joanna

2017-05-01

To assess the effectiveness of breast support previous studies monitored breast kinematics and kinetics, subjective feedback, muscle activity (EMG), ground reaction forces (GRFs) and physiological measures in isolation. Comparing these variables within one study will establish the key performance variables that distinguish between breast supports during activities such as running. This study investigates the effects of changes in breast support on biomechanical, physiological and subjective measures during running. Ten females (34D) ran for 10 min in high and low breast supports, and for 2 min bare breasted (2.8 m·s -1 ). Breast and body kinematics, EMG, expired air and heart rate were recorded. GRFs were recorded during 10 m overground runs (2.8 m·s -1 ) and subjective feedback obtained after each condition. Of the 62 variables measured, 22 kinematic and subjective variables were influenced by changes in breast support. Willingness to exercise, time lag and superio-inferior breast velocity were most affected. GRFs, EMG and physiological variables were unaffected by breast support changes during running. Breast displacement reduction, although previously advocated, was not the most sensitive variable to breast support changes during running. Instead breast support products should be assessed using a battery of performance indicators, including the key kinematic and subjective variables identified here.

Solar electric geocentric transfer with attitude constraints: Analysis

NASA Technical Reports Server (NTRS)

Sackett, L. L.; Malchow, H. L.; Delbaum, T. N.

1975-01-01

A time optimal or nearly time optimal trajectory program was developed for solar electric geocentric transfer with or without attitude constraints and with an optional initial high thrust stage. The method of averaging reduces computation time. A nonsingular set of orbital elements is used. The constraints, which are those of one of the SERT-C designs, introduce complexities into the analysis and the solution yields possible discontinuous changes in thrust direction. The power degradation due to VanAllen radiation is modeled analytically. A wide range of solar cell characteristics is assumed. Effects such as oblateness and shadowing are included. The analysis and the results of many example runs are included.

Running with a minimalist shoe increases plantar pressure in the forefoot region of healthy female runners.

PubMed

Bergstra, S A; Kluitenberg, B; Dekker, R; Bredeweg, S W; Postema, K; Van den Heuvel, E R; Hijmans, J M; Sobhani, S

2015-07-01

Minimalist running shoes have been proposed as an alternative to barefoot running. However, several studies have reported cases of forefoot stress fractures after switching from standard to minimalist shoes. Therefore, the aim of the current study was to investigate the differences in plantar pressure in the forefoot region between running with a minimalist shoe and running with a standard shoe in healthy female runners during overground running. Randomized crossover design. In-shoe plantar pressure measurements were recorded from eighteen healthy female runners. Peak pressure, maximum mean pressure, pressure time integral and instant of peak pressure were assessed for seven foot areas. Force time integral, stride time, stance time, swing time, shoe comfort and landing type were assessed for both shoe types. A linear mixed model was used to analyze the data. Peak pressure and maximum mean pressure were higher in the medial forefoot (respectively 13.5% and 7.46%), central forefoot (respectively 37.5% and 29.2%) and lateral forefoot (respectively 37.9% and 20.4%) for the minimalist shoe condition. Stance time was reduced with 3.81%. No relevant differences in shoe comfort or landing strategy were found. Running with a minimalist shoe increased plantar pressure without a change in landing pattern. This increased pressure in the forefoot region might play a role in the occurrence of metatarsal stress fractures in runners who switched to minimalist shoes and warrants a cautious approach to transitioning to minimalist shoe use. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

TRAINING ERRORS AND RUNNING RELATED INJURIES: A SYSTEMATIC REVIEW

PubMed Central

Buist, Ida; Sørensen, Henrik; Lind, Martin; Rasmussen, Sten

2012-01-01

Purpose: The purpose of this systematic review was to examine the link between training characteristics (volume, duration, frequency, and intensity) and running related injuries. Methods: A systematic search was performed in PubMed, Web of Science, Embase, and SportDiscus. Studies were included if they examined novice, recreational, or elite runners between the ages of 18 and 65. Exposure variables were training characteristics defined as volume, distance or mileage, time or duration, frequency, intensity, speed or pace, or similar terms. The outcome of interest was Running Related Injuries (RRI) in general or specific RRI in the lower extremity or lower back. Methodological quality was evaluated using quality assessment tools of 11 to 16 items. Results: After examining 4561 titles and abstracts, 63 articles were identified as potentially relevant. Finally, nine retrospective cohort studies, 13 prospective cohort studies, six case-control studies, and three randomized controlled trials were included. The mean quality score was 44.1%. Conflicting results were reported on the relationships between volume, duration, intensity, and frequency and RRI. Conclusion: It was not possible to identify which training errors were related to running related injuries. Still, well supported data on which training errors relate to or cause running related injuries is highly important for determining proper prevention strategies. If methodological limitations in measuring training variables can be resolved, more work can be conducted to define training and the interactions between different training variables, create several hypotheses, test the hypotheses in a large scale prospective study, and explore cause and effect relationships in randomized controlled trials. Level of evidence: 2a PMID:22389869

Radar Unix: a complete package for GPR data processing

NASA Astrophysics Data System (ADS)

Grandjean, Gilles; Durand, Herve

1999-03-01

A complete package for ground penetrating radar data interpretation including data processing, forward modeling and a case history database consultation is presented. Running on an Unix operating system, its architecture consists of a graphical user interface generating batch files transmitted to a library of processing routines. This design allows a better software maintenance and the possibility for the user to run processing or modeling batch files by itself and differed in time. A case history data base is available and consists of an hypertext document which can be consulted by using a standard HTML browser. All the software specifications are presented through a realistic example.

New virtual laboratories presenting advanced motion control concepts

NASA Astrophysics Data System (ADS)

Goubej, Martin; Krejčí, Alois; Reitinger, Jan

2015-11-01

The paper deals with development of software framework for rapid generation of remote virtual laboratories. Client-server architecture is chosen in order to employ real-time simulation core which is running on a dedicated server. Ordinary web browser is used as a final renderer to achieve hardware independent solution which can be run on different target platforms including laptops, tablets or mobile phones. The provided toolchain allows automatic generation of the virtual laboratory source code from the configuration file created in the open- source Inkscape graphic editor. Three virtual laboratories presenting advanced motion control algorithms have been developed showing the applicability of the proposed approach.

Effect of a prior intermittent run at vVO2max on oxygen kinetics during an all-out severe run in humans.

PubMed

Billat, V L; Bocquet, V; Slawinski, J; Laffite, L; Demarle, A; Chassaing, P; Koralsztein, J P

2000-09-01

The purpose of this study was to examine the influence of prior intermittent running at VO2max on oxygen kinetics during a continuous severe intensity run and the time spent at VO2max. Eight long-distance runners performed three maximal tests on a synthetic track (400 m) whilst breathing through the COSMED K4 portable telemetric metabolic analyser: i) an incremental test which determined velocity at the lactate threshold (vLT), VO2max and velocity associated with VO2max (vVO2max), ii) a continuous severe intensity run at vLT+50% (vdelta50) of the difference between vLT and vVO2max (91.3+/-1.6% VO2max)preceded by a light continuous 20 minute run at 50% of vVO2max (light warm-up), iii) the same continuous severe intensity run at vdelta50 with a prior interval training exercise (hard warm-up) of repeated hard running bouts performed at 100% of vVO2max and light running at 50% of vVO2max (of 30 seconds each) performed until exhaustion (on average 19+/-5 min with 19+/-5 interval repetitions). This hard warm-up speeded the VO2 kinetics: the time constant was reduced by 45% (28+/-7 sec vs 51+/-37 sec) and the slow component of VO2 (deltaVO2 6-3 min) was deleted (-143+/-271 ml x min(-1) vs 291+/-153 ml x min(-1)). In conclusion, despite a significantly lower total run time at vdelta50 (6 min 19+/-0) min 17 vs 8 min 20+/-1 min 45, p=0.02) after the intermittent warm-up at VO2max, the time spent specifically at VO2max in the severe continuous run at vdelta50 was not significantly different.

An automated metrics system to measure and improve the success of laboratory automation implementation.

PubMed

Benn, Neil; Turlais, Fabrice; Clark, Victoria; Jones, Mike; Clulow, Stephen

2007-03-01

The authors describe a system for collecting usage metrics from widely distributed automation systems. An application that records and stores usage data centrally, calculates run times, and charts the data was developed. Data were collected over 20 months from at least 28 workstations. The application was used to plot bar charts of date versus run time for individual workstations, the automation in a specific laboratory, or automation of a specified type. The authors show that revised user training, redeployment of equipment, and running complimentary processes on one workstation can increase the average number of runs by up to 20-fold and run times by up to 450%. Active monitoring of usage leads to more effective use of automation. Usage data could be used to determine whether purchasing particular automation was a good investment.

Stride-to-stride variability and complexity between novice and experienced runners during a prolonged run at anaerobic threshold speed.

PubMed

Mo, Shiwei; Chow, Daniel H K

2018-05-19

Motor control, related to running performance and running related injuries, is affected by progression of fatigue during a prolonged run. Distance runners are usually recommended to train at or slightly above anaerobic threshold (AT) speed for improving performance. However, running at AT speed may result in accelerated fatigue. It is not clear how one adapts running gait pattern during a prolonged run at AT speed and if there are differences between runners with different training experience. To compare characteristics of stride-to-stride variability and complexity during a prolonged run at AT speed between novice runners (NR) and experienced runners (ER). Both NR (n = 17) and ER (n = 17) performed a treadmill run for 31 min at his/her AT speed. Stride interval dynamics was obtained throughout the run with the middle 30 min equally divided into six time intervals (denoted as T1, T2, T3, T4, T5 and T6). Mean, coefficient of variation (CV) and scaling exponent alpha of stride intervals were calculated for each interval of each group. This study revealed mean stride interval significantly increased with running time in a non-linear trend (p<0.001). The stride interval variability (CV) maintained relatively constant for NR (p = 0.22) and changed nonlinearly for ER (p = 0.023) throughout the run. Alpha was significantly different between groups at T2, T5 and T6, and nonlinearly changed with running time for both groups with slight differences. These findings provided insights into how the motor control system adapts to progression of fatigue and evidences that long-term training enhances motor control. Although both ER and NR could regulate gait complexity to maintain AT speed throughout the prolonged run, ER also regulated stride interval variability to achieve the goal. Copyright © 2018. Published by Elsevier B.V.

Hiding the Disk and Network Latency of Out-of-Core Visualization

NASA Technical Reports Server (NTRS)

Ellsworth, David

2001-01-01

This paper describes an algorithm that improves the performance of application-controlled demand paging for out-of-core visualization by hiding the latency of reading data from both local disks or disks on remote servers. The performance improvements come from better overlapping the computation with the page reading process, and by performing multiple page reads in parallel. The paper includes measurements that show that the new multithreaded paging algorithm decreases the time needed to compute visualizations by one third when using one processor and reading data from local disk. The time needed when using one processor and reading data from remote disk decreased by two thirds. Visualization runs using data from remote disk actually ran faster than ones using data from local disk because the remote runs were able to make use of the remote server's high performance disk array.

Database Performance Monitoring for the Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klise, Katherine A.

The Database Performance Monitoring (DPM) software (copyright in processes) is being developed at Sandia National Laboratories to perform quality control analysis on time series data. The software loads time indexed databases (currently csv format), performs a series of quality control tests defined by the user, and creates reports which include summary statistics, tables, and graphics. DPM can be setup to run on an automated schedule defined by the user. For example, the software can be run once per day to analyze data collected on the previous day. HTML formatted reports can be sent via email or hosted on a website.more » To compare performance of several databases, summary statistics and graphics can be gathered in a dashboard view which links to detailed reporting information for each database. The software can be customized for specific applications.« less

78 FR 61946 - Pheasant Run Wind, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-07

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-2461-000] Pheasant Run Wind, LLC; Supplemental Notice That Initial Market- Based Rate Filing Includes Request for Blanket... Run Wind, LLC's application for market-based rate authority, with an accompanying rate schedule...

Visualization of synchronization of the uterine contraction signals: running cross-correlation and wavelet running cross-correlation methods.

PubMed

Oczeretko, Edward; Swiatecka, Jolanta; Kitlas, Agnieszka; Laudanski, Tadeusz; Pierzynski, Piotr

2006-01-01

In physiological research, we often study multivariate data sets, containing two or more simultaneously recorded time series. The aim of this paper is to present the cross-correlation and the wavelet cross-correlation methods to assess synchronization between contractions in different topographic regions of the uterus. From a medical point of view, it is important to identify time delays between contractions, which may be of potential diagnostic significance in various pathologies. The cross-correlation was computed in a moving window with a width corresponding to approximately two or three contractions. As a result, the running cross-correlation function was obtained. The propagation% parameter assessed from this function allows quantitative description of synchronization in bivariate time series. In general, the uterine contraction signals are very complicated. Wavelet transforms provide insight into the structure of the time series at various frequencies (scales). To show the changes of the propagation% parameter along scales, a wavelet running cross-correlation was used. At first, the continuous wavelet transforms as the uterine contraction signals were received and afterwards, a running cross-correlation analysis was conducted for each pair of transformed time series. The findings show that running functions are very useful in the analysis of uterine contractions.

Search for Gravitational-wave Inspiral Signals Associated with Short Gamma-ray Bursts During LIGO's Fifth and Virgo's First Science Run

NASA Astrophysics Data System (ADS)

Abadie, J.; Abbott, B. P.; Abbott, R.; Accadia, T.; Acernese, F.; Adhikari, R.; Ajith, P.; Allen, B.; Allen, G.; Amador Ceron, E.; Amin, R. S.; Anderson, S. B.; Anderson, W. G.; Antonucci, F.; Aoudia, S.; Arain, M. A.; Araya, M.; Arun, K. G.; Aso, Y.; Aston, S.; Astone, P.; Aufmuth, P.; Aulbert, C.; Babak, S.; Baker, P.; Ballardin, G.; Ballmer, S.; Barker, D.; Barone, F.; Barr, B.; Barriga, P.; Barsotti, L.; Barsuglia, M.; Barton, M. A.; Bartos, I.; Bassiri, R.; Bastarrika, M.; Bauer, Th. S.; Behnke, B.; Beker, M. G.; Belletoile, A.; Benacquista, M.; Betzwieser, J.; Beyersdorf, P. T.; Bigotta, S.; Bilenko, I. A.; Billingsley, G.; Birindelli, S.; Biswas, R.; Bizouard, M. A.; Black, E.; Blackburn, J. K.; Blackburn, L.; Blair, D.; Bland, B.; Blom, M.; Boccara, C.; Bock, O.; Bodiya, T. P.; Bondarescu, R.; Bondu, F.; Bonelli, L.; Bonnand, R.; Bork, R.; Born, M.; Bose, S.; Bosi, L.; Braccini, S.; Bradaschia, C.; Brady, P. R.; Braginsky, V. B.; Brau, J. E.; Breyer, J.; Bridges, D. O.; Brillet, A.; Brinkmann, M.; Brisson, V.; Britzger, M.; Brooks, A. F.; Brown, D. A.; Budzyński, R.; Bulik, T.; Bullington, A.; Bulten, H. J.; Buonanno, A.; Burguet-Castell, J.; Burmeister, O.; Buskulic, D.; Buy, C.; Byer, R. L.; Cadonati, L.; Cagnoli, G.; Cain, J.; Calloni, E.; Camp, J. B.; Campagna, E.; Cannizzo, J.; Cannon, K. C.; Canuel, B.; Cao, J.; Capano, C. D.; Carbognani, F.; Cardenas, L.; Caudill, S.; Cavaglià, M.; Cavalier, F.; Cavalieri, R.; Cella, G.; Cepeda, C.; Cesarini, E.; Chalermsongsak, T.; Chalkley, E.; Charlton, P.; Chassande-Mottin, E.; Chatterji, S.; Chelkowski, S.; Chen, Y.; Chincarini, A.; Christensen, N.; Chua, S. S. Y.; Chung, C. T. Y.; Clark, D.; Clark, J.; Clayton, J. H.; Cleva, F.; Coccia, E.; Colacino, C. N.; Colas, J.; Colla, A.; Colombini, M.; Conte, R.; Cook, D.; Corbitt, T. R. C.; Cornish, N.; Corsi, A.; Coulon, J.-P.; Coward, D.; Coyne, D. C.; Creighton, J. D. E.; Creighton, T. D.; Cruise, A. M.; Culter, R. M.; Cumming, A.; Cunningham, L.; Cuoco, E.; Dahl, K.; Danilishin, S. L.; D'Antonio, S.; Danzmann, K.; Dattilo, V.; Daudert, B.; Davier, M.; Davies, G.; Daw, E. J.; Day, R.; Dayanga, T.; De Rosa, R.; DeBra, D.; Degallaix, J.; del Prete, M.; Dergachev, V.; DeSalvo, R.; Dhurandhar, S.; Di Fiore, L.; Di Lieto, A.; Emilio, M. Di Paolo; Di Virgilio, A.; Díaz, M.; Dietz, A.; Donovan, F.; Dooley, K. L.; Doomes, E. E.; Drago, M.; Drever, R. W. P.; Driggers, J.; Dueck, J.; Duke, I.; Dumas, J.-C.; Edgar, M.; Edwards, M.; Effler, A.; Ehrens, P.; Etzel, T.; Evans, M.; Evans, T.; Fafone, V.; Fairhurst, S.; Faltas, Y.; Fan, Y.; Fazi, D.; Fehrmann, H.; Ferrante, I.; Fidecaro, F.; Finn, L. S.; Fiori, I.; Flaminio, R.; Flasch, K.; Foley, S.; Forrest, C.; Fotopoulos, N.; Fournier, J.-D.; Franc, J.; Frasca, S.; Frasconi, F.; Frede, M.; Frei, M.; Frei, Z.; Freise, A.; Frey, R.; Fricke, T. T.; Friedrich, D.; Fritschel, P.; Frolov, V. V.; Fulda, P.; Fyffe, M.; Galimberti, M.; Gammaitoni, L.; Garofoli, J. A.; Garufi, F.; Gemme, G.; Genin, E.; Gennai, A.; Ghosh, S.; Giaime, J. A.; Giampanis, S.; Giardina, K. D.; Giazotto, A.; Goetz, E.; Goggin, L. M.; González, G.; Goßler, S.; Gouaty, R.; Granata, M.; Grant, A.; Gras, S.; Gray, C.; Greenhalgh, R. J. S.; Gretarsson, A. M.; Greverie, C.; Grosso, R.; Grote, H.; Grunewald, S.; Guidi, G. M.; Gustafson, E. K.; Gustafson, R.; Hage, B.; Hallam, J. M.; Hammer, D.; Hammond, G. D.; Hanna, C.; Hanson, J.; Harms, J.; Harry, G. M.; Harry, I. W.; Harstad, E. D.; Haughian, K.; Hayama, K.; Hayler, T.; Heefner, J.; Heitmann, H.; Hello, P.; Heng, I. S.; Heptonstall, A.; Hewitson, M.; Hild, S.; Hirose, E.; Hoak, D.; Hodge, K. A.; Holt, K.; Hosken, D. J.; Hough, J.; Howell, E.; Hoyland, D.; Huet, D.; Hughey, B.; Husa, S.; Huttner, S. H.; Ingram, D. R.; Isogai, T.; Ivanov, A.; Jaranowski, P.; Johnson, W. W.; Jones, D. I.; Jones, G.; Jones, R.; Ju, L.; Kalmus, P.; Kalogera, V.; Kandhasamy, S.; Kanner, J.; Katsavounidis, E.; Kawabe, K.; Kawamura, S.; Kawazoe, F.; Kells, W.; Keppel, D. G.; Khalaidovski, A.; Khalili, F. Y.; Khan, R.; Khazanov, E.; Kim, H.; King, P. J.; Kissel, J. S.; Klimenko, S.; Kokeyama, K.; Kondrashov, V.; Kopparapu, R.; Koranda, S.; Kowalska, I.; Kozak, D.; Kringel, V.; Krishnan, B.; Królak, A.; Kuehn, G.; Kullman, J.; Kumar, R.; Kwee, P.; Lam, P. K.; Landry, M.; Lang, M.; Lantz, B.; Lastzka, N.; Lazzarini, A.; Leaci, P.; Lei, M.; Leindecker, N.; Leonor, I.; Leroy, N.; Letendre, N.; Li, T. G. F.; Lin, H.; Lindquist, P. E.; Littenberg, T. B.; Lockerbie, N. A.; Lodhia, D.; Lorenzini, M.; Loriette, V.; Lormand, M.; Losurdo, G.; Lu, P.; Lubiński, M.; Lucianetti, A.; Lück, H.; Lundgren, A.; Machenschalk, B.; MacInnis, M.; Mageswaran, M.; Mailand, K.; Majorana, E.; Mak, C.; Maksimovic, I.; Man, N.; Mandel, I.; Mandic, V.; Mantovani, M.; Marchesoni, F.; Marion, F.; Márka, S.; Márka, Z.; Markosyan, A.; Markowitz, J.; Maros, E.; Marque, J.; Martelli, F.; Martin, I. W.; Martin, R. M.; Marx, J. N.; Mason, K.; Masserot, A.; Matichard, F.; Matone, L.; Matzner, R. A.; Mavalvala, N.; McCarthy, R.; McClelland, D. E.; McGuire, S. C.; McIntyre, G.; McKechan, D. J. A.; Mehmet, M.; Melatos, A.; Melissinos, A. C.; Mendell, G.; Menéndez, D. F.; Mercer, R. A.; Merill, L.; Meshkov, S.; Messenger, C.; Meyer, M. S.; Miao, H.; Michel, C.; Milano, L.; Miller, J.; Minenkov, Y.; Mino, Y.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Miyakawa, O.; Moe, B.; Mohan, M.; Mohanty, S. D.; Mohapatra, S. R. P.; Moreau, J.; Moreno, G.; Morgado, N.; Morgia, A.; Mors, K.; Mosca, S.; Moscatelli, V.; Mossavi, K.; Mours, B.; MowLowry, C.; Mueller, G.; Mukherjee, S.; Mullavey, A.; Müller-Ebhardt, H.; Munch, J.; Murray, P. G.; Nash, T.; Nawrodt, R.; Nelson, J.; Neri, I.; Newton, G.; Nishida, E.; Nishizawa, A.; Nocera, F.; Ochsner, E.; O'Dell, J.; Ogin, G. H.; Oldenburg, R.; O'Reilly, B.; O'Shaughnessy, R.; Ottaway, D. J.; Ottens, R. S.; Overmier, H.; Owen, B. J.; Page, A.; Pagliaroli, G.; Palomba, C.; Pan, Y.; Pankow, C.; Paoletti, F.; Papa, M. A.; Pardi, S.; Parisi, M.; Pasqualetti, A.; Passaquieti, R.; Passuello, D.; Patel, P.; Pathak, D.; Pedraza, M.; Pekowsky, L.; Penn, S.; Peralta, C.; Perreca, A.; Persichetti, G.; Pichot, M.; Pickenpack, M.; Piergiovanni, F.; Pietka, M.; Pinard, L.; Pinto, I. M.; Pitkin, M.; Pletsch, H. J.; Plissi, M. V.; Poggiani, R.; Postiglione, F.; Prato, M.; Predoi, V.; Principe, M.; Prix, R.; Prodi, G. A.; Prokhorov, L.; Puncken, O.; Punturo, M.; Puppo, P.; Quetschke, V.; Raab, F. J.; Rabeling, D. S.; Radkins, H.; Raffai, P.; Raics, Z.; Rakhmanov, M.; Rapagnani, P.; Raymond, V.; Re, V.; Reed, C. M.; Reed, T.; Regimbau, T.; Rehbein, H.; Reid, S.; Reitze, D. H.; Ricci, F.; Riesen, R.; Riles, K.; Roberts, P.; Robertson, N. A.; Robinet, F.; Robinson, C.; Robinson, E. L.; Rocchi, A.; Roddy, S.; Röver, C.; Rolland, L.; Rollins, J.; Romano, J. D.; Romano, R.; Romie, J. H.; Rosińska, D.; Rowan, S.; Rüdiger, A.; Ruggi, P.; Ryan, K.; Sakata, S.; Salemi, F.; Sammut, L.; Sancho de la Jordana, L.; Sandberg, V.; Sannibale, V.; Santamaría, L.; Santostasi, G.; Saraf, S.; Sarin, P.; Sassolas, B.; Sathyaprakash, B. S.; Sato, S.; Satterthwaite, M.; Saulson, P. R.; Savage, R.; Schilling, R.; Schnabel, R.; Schofield, R.; Schulz, B.; Schutz, B. F.; Schwinberg, P.; Scott, J.; Scott, S. M.; Searle, A. C.; Seifert, F.; Sellers, D.; Sengupta, A. S.; Sentenac, D.; Sergeev, A.; Shapiro, B.; Shawhan, P.; Shoemaker, D. H.; Sibley, A.; Siemens, X.; Sigg, D.; Sintes, A. M.; Skelton, G.; Slagmolen, B. J. J.; Slutsky, J.; Smith, J. R.; Smith, M. R.; Smith, N. D.; Somiya, K.; Sorazu, B.; Stein, A. J.; Stein, L. C.; Steplewski, S.; Stochino, A.; Stone, R.; Strain, K. A.; Strigin, S.; Stroeer, A.; Sturani, R.; Stuver, A. L.; Summerscales, T. Z.; Sung, M.; Susmithan, S.; Sutton, P. J.; Swinkels, B.; Szokoly, G. P.; Talukder, D.; Tanner, D. B.; Tarabrin, S. P.; Taylor, J. R.; Taylor, R.; Thorne, K. A.; Thorne, K. S.; Thüring, A.; Titsler, C.; Tokmakov, K. V.; Toncelli, A.; Tonelli, M.; Torres, C.; Torrie, C. I.; Tournefier, E.; Travasso, F.; Traylor, G.; Trias, M.; Trummer, J.; Turner, L.; Ugolini, D.; Urbanek, K.; Vahlbruch, H.; Vajente, G.; Vallisneri, M.; van den Brand, J. F. J.; Van Den Broeck, C.; van der Putten, S.; van der Sluys, M. V.; Vass, S.; Vaulin, R.; Vavoulidis, M.; Vecchio, A.; Vedovato, G.; van Veggel, A. A.; Veitch, J.; Veitch, P. J.; Veltkamp, C.; Verkindt, D.; Vetrano, F.; Viceré, A.; Villar, A.; Vinet, J.-Y.; Vocca, H.; Vorvick, C.; Vyachanin, S. P.; Waldman, S. J.; Wallace, L.; Wanner, A.; Ward, R. L.; Was, M.; Wei, P.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Wen, L.; Wen, S.; Wessels, P.; West, M.; Westphal, T.; Wette, K.; Whelan, J. T.; Whitcomb, S. E.; Whiting, B. F.; Wilkinson, C.; Willems, P. A.; Williams, H. R.; Williams, L.; Willke, B.; Wilmut, I.; Winkelmann, L.; Winkler, W.; Wipf, C. C.; Wiseman, A. G.; Woan, G.; Wooley, R.; Worden, J.; Yakushin, I.; Yamamoto, H.; Yamamoto, K.; Yeaton-Massey, D.; Yoshida, S.; Yu, P. P.; Yvert, M.; Zanolin, M.; Zhang, L.; Zhang, Z.; Zhao, C.; Zotov, N.; Zucker, M. E.; Zweizig, J.; LIGO Scientific Collaboration; Virgo Collaboration

2010-06-01

Progenitor scenarios for short gamma-ray bursts (short GRBs) include coalescenses of two neutron stars or a neutron star and black hole, which would necessarily be accompanied by the emission of strong gravitational waves. We present a search for these known gravitational-wave signatures in temporal and directional coincidence with 22 GRBs that had sufficient gravitational-wave data available in multiple instruments during LIGO's fifth science run, S5, and Virgo's first science run, VSR1. We find no statistically significant gravitational-wave candidates within a [ - 5, + 1) s window around the trigger time of any GRB. Using the Wilcoxon-Mann-Whitney U-test, we find no evidence for an excess of weak gravitational-wave signals in our sample of GRBs. We exclude neutron star-black hole progenitors to a median 90% confidence exclusion distance of 6.7 Mpc.

Performance, emissions, and physical characteristics of a rotating combustion aircraft engine

NASA Technical Reports Server (NTRS)

Berkowitz, M.; Hermes, W. L.; Mount, R. E.; Myers, D.

1976-01-01

The RC2-75, a liquid cooled two chamber rotary combustion engine (Wankel type), designed for aircraft use, was tested and representative baseline (212 KW, 285 BHP) performance and emissions characteristics established. The testing included running fuel/air mixture control curves and varied ignition timing to permit selection of desirable and practical settings for running wide open throttle curves, propeller load curves, variable manifold pressure curves covering cruise conditions, and EPA cycle operating points. Performance and emissions data were recorded for all of the points run. In addition to the test data, information required to characterize the engine and evaluate its performance in aircraft use is provided over a range from one half to twice its present power. The exhaust emissions results are compared to the 1980 EPA requirements. Standard day take-off brake specific fuel consumption is 356 g/KW-HR (.585 lb/BHP-HR) for the configuration tested.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Richen; Guo, Hanqi; Yuan, Xiaoru

Most of the existing approaches to visualize vector field ensembles are to reveal the uncertainty of individual variables, for example, statistics, variability, etc. However, a user-defined derived feature like vortex or air mass is also quite significant, since they make more sense to domain scientists. In this paper, we present a new framework to extract user-defined derived features from different simulation runs. Specially, we use a detail-to-overview searching scheme to help extract vortex with a user-defined shape. We further compute the geometry information including the size, the geo-spatial location of the extracted vortexes. We also design some linked views tomore » compare them between different runs. At last, the temporal information such as the occurrence time of the feature is further estimated and compared. Results show that our method is capable of extracting the features across different runs and comparing them spatially and temporally.« less

Simple estimation of linear 1+1 D tsunami run-up

NASA Astrophysics Data System (ADS)

Fuentes, M.; Campos, J. A.; Riquelme, S.

2016-12-01

An analytical expression is derived concerning the linear run-up for any given initial wave generated over a sloping bathymetry. Due to the simplicity of the linear formulation, complex transformations are unnecessay, because the shoreline motion is directly obtained in terms of the initial wave. This analytical result not only supports maximum run-up invariance between linear and non-linear theories, but also the time evolution of shoreline motion and velocity. The results exhibit good agreement with the non-linear theory. The present formulation also allows computing the shoreline motion numerically from a customised initial waveform, including non-smooth functions. This is useful for numerical tests, laboratory experiments or realistic cases in which the initial disturbance might be retrieved from seismic data rather than using a theoretical model. It is also shown that the real case studied is consistent with the field observations.

Sensitivity analysis, calibration, and testing of a distributed hydrological model using error‐based weighting and one objective function

USGS Publications Warehouse

Foglia, L.; Hill, Mary C.; Mehl, Steffen W.; Burlando, P.

2009-01-01

We evaluate the utility of three interrelated means of using data to calibrate the fully distributed rainfall‐runoff model TOPKAPI as applied to the Maggia Valley drainage area in Switzerland. The use of error‐based weighting of observation and prior information data, local sensitivity analysis, and single‐objective function nonlinear regression provides quantitative evaluation of sensitivity of the 35 model parameters to the data, identification of data types most important to the calibration, and identification of correlations among parameters that contribute to nonuniqueness. Sensitivity analysis required only 71 model runs, and regression required about 50 model runs. The approach presented appears to be ideal for evaluation of models with long run times or as a preliminary step to more computationally demanding methods. The statistics used include composite scaled sensitivities, parameter correlation coefficients, leverage, Cook's D, and DFBETAS. Tests suggest predictive ability of the calibrated model typical of hydrologic models.

Cassini Scientist for a Day: Encouraging Science Research and Writing for Students on National and International Scales

NASA Astrophysics Data System (ADS)

Zimmerman Brachman, R.; Piazza, E.

2010-12-01

The Cassini Outreach Group for the Cassini mission to Saturn at NASA’s Jet Propulsion Laboratory runs an international essay contest called “Cassini Scientist for a Day.” Students write essays about Saturn and its rings and moons. The program has been run nine times, increasing in scope with each contest. Students in grades 5-12 gain skills in critical thinking, decision-making, researching, asking good questions, and communicating their ideas to scientists. Winners and their classes participate in teleconferencing question and answer sessions with Cassini scientists so students can ask questions to professional scientists. Videos of young Cassini scientists are included in the contest reference materials to provide role models for the students. Thousands of students in 27 countries on 6 continents have participated in the essay contest. Volunteers run the international contests outside of the United States, with their own rules, languages, and prizes.

Cassini Scientist for a Day: Encouraging Science Research and Writing for Students on National and International Scales

NASA Astrophysics Data System (ADS)

Zimmerman Brachman, R.; Wessen, A.; Piazza, E.

2011-10-01

The outreach team for the Cassini mission to Saturn at NASA's Jet Propulsion Laboratory (JPL) runs an international essay contest called "Cassini Scientist for a Day." Students write essays about Saturn and its rings and moons. The program has been run nine times, increasing in scope with each contest. Students in grades 5 to 12 (ages 10 to 18) gain skills in critical thinking, decision-making, researching, asking good questions, and communicating their ideas to scientists. Winners and their classes participate in teleconferencing question-and-answer sessions with Cassini scientists so students can ask questions to professional scientists. Videos of young Cassini scientists are included in the contest reference materials to provide role models for the students. Thousands of students in 50 countries on 6 continents have participated in the essay contest. Volunteers run the international contests outside of the United States, with their own rules, languages, and prizes.

Reliability of Vibrating Mesh Technology.

PubMed

Gowda, Ashwin A; Cuccia, Ann D; Smaldone, Gerald C

2017-01-01

For delivery of inhaled aerosols, vibrating mesh systems are more efficient than jet nebulizers are and do not require added gas flow. We assessed the reliability of a vibrating mesh nebulizer (Aerogen Solo, Aerogen Ltd, Galway Ireland) suitable for use in mechanical ventilation. An initial observational study was performed with 6 nebulizers to determine run time and efficiency using normal saline and distilled water. Nebulizers were run until cessation of aerosol production was noted, with residual volume and run time recorded. Three controllers were used to assess the impact of the controller on nebulizer function. Following the observational study, a more detailed experimental protocol was performed using 20 nebulizers. For this analysis, 2 controllers were used, and time to cessation of aerosol production was noted. Gravimetric techniques were used to measure residual volume. Total nebulization time and residual volume were recorded. Failure was defined as premature cessation of aerosol production represented by residual volume of > 10% of the nebulizer charge. In the initial observational protocol, an unexpected sporadic failure rate was noted of 25% in 55 experimental runs. In the experimental protocol, a failure rate was noted of 30% in 40 experimental runs. Failed runs in the experimental protocol exhibited a wide range of retained volume averaging ± SD 36 ± 21.3% compared with 3.2 ± 1.5% (P = .001) in successful runs. Small but significant differences existed in nebulization time between controllers. Aerogen Solo nebulization was often randomly interrupted with a wide range of retained volumes. Copyright © 2017 by Daedalus Enterprises.

The swimming behavior of flagellated bacteria in viscous and viscoelastic media

NASA Astrophysics Data System (ADS)

Qu, Zijie; Henderikx, Rene; Breuer, Kenneth

2016-11-01

The motility of bacteria E.coli in viscous and viscoelastic fluids has been widely studied although full understanding remains elusive. The swimming mode of wild-type E.coli is well-described by a run-and-tumble sequence in which periods of straight swimming at a constant speed are randomly interrupted by a tumble, defined as a sudden change of direction with a very low speed. Using a tracking microscope, we follow cells for extended periods of time and find that the swimming behavior can be more complex, and can include a wider variety of behaviors including a "slow random walk" in which the cells move at relatively low speed without the characteristic run. Significant variation between individual cells is observed, and furthermore, a single cell can change its motility during the course of a tracking event. Changing the viscosity and viscoelasticy of the swimming media also has profound effects on the average swimming speed and run-tumble nature of the cell motility, including changing the distribution, duration of tumbling and slow random walk events. The reasons for these changes are explained using a Purcell-style resistive force model for the cell and flagellar behavior as well as model for the changes in flagellar bundling in different fluid viscosities. National Science Foundation.

Staghorn: An Automated Large-Scale Distributed System Analysis Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabert, Kasimir; Burns, Ian; Elliott, Steven

2016-09-01

Conducting experiments on large-scale distributed computing systems is becoming significantly easier with the assistance of emulation. Researchers can now create a model of a distributed computing environment and then generate a virtual, laboratory copy of the entire system composed of potentially thousands of virtual machines, switches, and software. The use of real software, running at clock rate in full virtual machines, allows experiments to produce meaningful results without necessitating a full understanding of all model components. However, the ability to inspect and modify elements within these models is bound by the limitation that such modifications must compete with the model,more » either running in or alongside it. This inhibits entire classes of analyses from being conducted upon these models. We developed a mechanism to snapshot an entire emulation-based model as it is running. This allows us to \\freeze time" and subsequently fork execution, replay execution, modify arbitrary parts of the model, or deeply explore the model. This snapshot includes capturing packets in transit and other input/output state along with the running virtual machines. We were able to build this system in Linux using Open vSwitch and Kernel Virtual Machines on top of Sandia's emulation platform Firewheel. This primitive opens the door to numerous subsequent analyses on models, including state space exploration, debugging distributed systems, performance optimizations, improved training environments, and improved experiment repeatability.« less

Lambda: A Mathematica package for operator product expansions in vertex algebras

NASA Astrophysics Data System (ADS)

Ekstrand, Joel

2011-02-01

We give an introduction to the Mathematica package Lambda, designed for calculating λ-brackets in both vertex algebras, and in SUSY vertex algebras. This is equivalent to calculating operator product expansions in two-dimensional conformal field theory. The syntax of λ-brackets is reviewed, and some simple examples are shown, both in component notation, and in N=1 superfield notation. Program summaryProgram title: Lambda Catalogue identifier: AEHF_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHF_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 18 087 No. of bytes in distributed program, including test data, etc.: 131 812 Distribution format: tar.gz Programming language: Mathematica Computer: See specifications for running Mathematica V7 or above. Operating system: See specifications for running Mathematica V7 or above. RAM: Varies greatly depending on calculation to be performed. Classification: 4.2, 5, 11.1. Nature of problem: Calculate operator product expansions (OPEs) of composite fields in 2d conformal field theory. Solution method: Implementation of the algebraic formulation of OPEs given by vertex algebras, and especially by λ-brackets. Running time: Varies greatly depending on calculation requested. The example notebook provided takes about 3 s to run.

Fixed-interval matching-to-sample: intermatching time and intermatching error runs1

PubMed Central

Nelson, Thomas D.

1978-01-01

Four pigeons were trained on a matching-to-sample task in which reinforcers followed either the first matching response (fixed interval) or the fifth matching response (tandem fixed-interval fixed-ratio) that occurred 80 seconds or longer after the last reinforcement. Relative frequency distributions of the matching-to-sample responses that concluded intermatching times and runs of mismatches (intermatching error runs) were computed for the final matching responses directly followed by grain access and also for the three matching responses immediately preceding the final match. Comparison of these two distributions showed that the fixed-interval schedule arranged for the preferential reinforcement of matches concluding relatively extended intermatching times and runs of mismatches. Differences in matching accuracy and rate during the fixed interval, compared to the tandem fixed-interval fixed-ratio, suggested that reinforcers following matches concluding various intermatching times and runs of mismatches influenced the rate and accuracy of the last few matches before grain access, but did not control rate and accuracy throughout the entire fixed-interval period. PMID:16812032

Reference manual for generation and analysis of Habitat Time Series: version II

USGS Publications Warehouse

Milhous, Robert T.; Bartholow, John M.; Updike, Marlys A.; Moos, Alan R.

1990-01-01

The selection of an instream flow requirement for water resource management often requires the review of how the physical habitat changes through time. This review is referred to as 'Time Series Analysis." The Tune Series Library (fSLIB) is a group of programs to enter, transform, analyze, and display time series data for use in stream habitat assessment. A time series may be defined as a sequence of data recorded or calculated over time. Examples might be historical monthly flow, predicted monthly weighted usable area, daily electrical power generation, annual irrigation diversion, and so forth. The time series can be analyzed, both descriptively and analytically, to understand the importance of the variation in the events over time. This is especially useful in the development of instream flow needs based on habitat availability. The TSLIB group of programs assumes that you have an adequate study plan to guide you in your analysis. You need to already have knowledge about such things as time period and time step, species and life stages to consider, and appropriate comparisons or statistics to be produced and displayed or tabulated. Knowing your destination, you must first evaluate whether TSLIB can get you there. Remember, data are not answers. This publication is a reference manual to TSLIB and is intended to be a guide to the process of using the various programs in TSLIB. This manual is essentially limited to the hands-on use of the various programs. a TSLIB use interface program (called RTSM) has been developed to provide an integrated working environment where the use has a brief on-line description of each TSLIB program with the capability to run the TSLIB program while in the user interface. For information on the RTSM program, refer to Appendix F. Before applying the computer models described herein, it is recommended that the user enroll in the short course "Problem Solving with the Instream Flow Incremental Methodology (IFIM)." This course is offered by the Aquatic Systems Branch of the National Ecology Research Center. For more information about the TSLIB software, refer to the Memorandum of Understanding. Chapter 1 provides a brief introduction to the Instream Flow Incremental Methodology and TSLIB. Other chapters in this manual provide information on the different aspects of using the models. The information contained in the other chapters includes (2) acquisition, entry, manipulation, and listing of streamflow data; (3) entry, manipulation, and listing of the habitat-versus-streamflow function; (4) transferring streamflow data; (5) water resources systems analysis; (6) generation and analysis of daily streamflow and habitat values; (7) generation of the time series of monthly habitats; (8) manipulation, analysis, and display of month time series data; and (9) generation, analysis, and display of annual time series data. Each section includes documentation for the programs therein with at least one page of information for each program, including a program description, instructions for running the program, and sample output. The Appendixes contain the following: (A) sample file formats; (B) descriptions of default filenames; (C) alphabetical summary of batch-procedure files; (D) installing and running TSLIB on a microcomputer; (E) running TSLIB on a CDC Cyber computer; (F) using the TSLIB user interface program (RTSM); and (G) running WATSTORE on the USGS Amdahl mainframe computer. The number for this version of TSLIB--Version II-- is somewhat arbitrary, as the TSLIB programs were collected into a library some time ago; but operators tended to use and manage them as individual programs. Therefore, we will consider the group of programs from the past that were only on the CDC Cyber computer as Version 0; the programs from the past that were on both the Cyber and the IBM-compatible microcomputer as Version I; and the programs contained in this reference manual as Version II.

A public dataset of running biomechanics and the effects of running speed on lower extremity kinematics and kinetics

PubMed Central

Fukuchi, Claudiane A.; Duarte, Marcos

2017-01-01

Background The goals of this study were (1) to present the set of data evaluating running biomechanics (kinematics and kinetics), including data on running habits, demographics, and levels of muscle strength and flexibility made available at Figshare (DOI: 10.6084/m9.figshare.4543435); and (2) to examine the effect of running speed on selected gait-biomechanics variables related to both running injuries and running economy. Methods The lower-extremity kinematics and kinetics data of 28 regular runners were collected using a three-dimensional (3D) motion-capture system and an instrumented treadmill while the subjects ran at 2.5 m/s, 3.5 m/s, and 4.5 m/s wearing standard neutral shoes. Results A dataset comprising raw and processed kinematics and kinetics signals pertaining to this experiment is available in various file formats. In addition, a file of metadata, including demographics, running characteristics, foot-strike patterns, and muscle strength and flexibility measurements is provided. Overall, there was an effect of running speed on most of the gait-biomechanics variables selected for this study. However, the foot-strike patterns were not affected by running speed. Discussion Several applications of this dataset can be anticipated, including testing new methods of data reduction and variable selection; for educational purposes; and answering specific research questions. This last application was exemplified in the study’s second objective. PMID:28503379

A public dataset of running biomechanics and the effects of running speed on lower extremity kinematics and kinetics.

PubMed

Fukuchi, Reginaldo K; Fukuchi, Claudiane A; Duarte, Marcos

2017-01-01

The goals of this study were (1) to present the set of data evaluating running biomechanics (kinematics and kinetics), including data on running habits, demographics, and levels of muscle strength and flexibility made available at Figshare (DOI: 10.6084/m9.figshare.4543435); and (2) to examine the effect of running speed on selected gait-biomechanics variables related to both running injuries and running economy. The lower-extremity kinematics and kinetics data of 28 regular runners were collected using a three-dimensional (3D) motion-capture system and an instrumented treadmill while the subjects ran at 2.5 m/s, 3.5 m/s, and 4.5 m/s wearing standard neutral shoes. A dataset comprising raw and processed kinematics and kinetics signals pertaining to this experiment is available in various file formats. In addition, a file of metadata, including demographics, running characteristics, foot-strike patterns, and muscle strength and flexibility measurements is provided. Overall, there was an effect of running speed on most of the gait-biomechanics variables selected for this study. However, the foot-strike patterns were not affected by running speed. Several applications of this dataset can be anticipated, including testing new methods of data reduction and variable selection; for educational purposes; and answering specific research questions. This last application was exemplified in the study's second objective.

Influence of the world's most challenging mountain ultra-marathon on energy cost and running mechanics.

PubMed

Vernillo, Gianluca; Savoldelli, Aldo; Zignoli, Andrea; Trabucchi, Pietro; Pellegrini, Barbara; Millet, Grégoire P; Schena, Federico

2014-05-01

To examine the effects of the world's most challenging mountain ultra-marathon (Tor des Géants(®) 2012) on the energy cost of three types of locomotion (cycling, level and uphill running) and running kinematics. Before (pre-) and immediately after (post-) the competition, a group of ten male experienced ultra-marathon runners performed in random order three submaximal 4-min exercise trials: cycling at a power of 1.5 W kg(-1) body mass; level running at 9 km h(-1) and uphill running at 6 km h(-1) at an inclination of +15 % on a motorized treadmill. Two video cameras recorded running mechanics at different sampling rates. Between pre- and post-, the uphill-running energy cost decreased by 13.8 % (P = 0.004); no change was noted in the energy cost of level running or cycling (NS). There was an increase in contact time (+10.3 %, P = 0.019) and duty factor (+8.1 %, P = 0.001) and a decrease in swing time (-6.4 %, P = 0.008) in the uphill-running condition. After this extreme mountain ultra-marathon, the subjects modified only their uphill-running patterns for a more economical step mechanics.

TEA CO 2 Laser Simulator: A software tool to predict the output pulse characteristics of TEA CO 2 laser

NASA Astrophysics Data System (ADS)

Abdul Ghani, B.

2005-09-01

"TEA CO 2 Laser Simulator" has been designed to simulate the dynamic emission processes of the TEA CO 2 laser based on the six-temperature model. The program predicts the behavior of the laser output pulse (power, energy, pulse duration, delay time, FWHM, etc.) depending on the physical and geometrical input parameters (pressure ratio of gas mixture, reflecting area of the output mirror, media length, losses, filling and decay factors, etc.). Program summaryTitle of program: TEA_CO2 Catalogue identifier: ADVW Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVW Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer: P.IV DELL PC Setup: Atomic Energy Commission of Syria, Scientific Services Department, Mathematics and Informatics Division Operating system: MS-Windows 9x, 2000, XP Programming language: Delphi 6.0 No. of lines in distributed program, including test data, etc.: 47 315 No. of bytes in distributed program, including test data, etc.:7 681 109 Distribution format:tar.gz Classification: 15 Laser Physics Nature of the physical problem: "TEA CO 2 Laser Simulator" is a program that predicts the behavior of the laser output pulse by studying the effect of the physical and geometrical input parameters on the characteristics of the output laser pulse. The laser active medium consists of a CO 2-N 2-He gas mixture. Method of solution: Six-temperature model, for the dynamics emission of TEA CO 2 laser, has been adapted in order to predict the parameters of laser output pulses. A simulation of the laser electrical pumping was carried out using two approaches; empirical function equation (8) and differential equation (9). Typical running time: The program's running time mainly depends on both integration interval and step; for a 4 μs period of time and 0.001 μs integration step (defaults values used in the program), the running time will be about 4 seconds. Restrictions on the complexity: Using a very small integration step might leads to stop the program run due to the huge number of calculating points and to a small paging file size of the MS-Windows virtual memory. In such case, it is recommended to enlarge the paging file size to the appropriate size, or to use a bigger value of integration step.

Agreement between VO[subscript 2peak] Predicted from PACER and One-Mile Run Time-Equated Laps

ERIC Educational Resources Information Center

Saint-Maurice, Pedro F.; Anderson, Katelin; Bai, Yang; Welk, Gregory J.

2016-01-01

Purpose: This study examined the agreement between estimated peak oxygen consumption (VO[subscript 2peak]) obtained from the Progressive Aerobic Cardiovascular Endurance Run (PACER) fitness test and equated PACER laps derived from One-Mile Run time (MR). Methods: A sample of 680 participants (324 boys and 356 girls) in Grades 7 through 12…

The Reliability of a 5km Run Test on a Motorized Treadmill

ERIC Educational Resources Information Center

Driller, Matthew; Brophy-Williams, Ned; Walker, Anthony

2017-01-01

The purpose of the present study was to determine the reliability of a 5km run test on a motorized treadmill. Over three consecutive weeks, 12 well-trained runners completed three 5km time trials on a treadmill following a standardized warm-up. Runners were partially-blinded to their running speed and distance covered. Total time to complete the…

40 CFR Table 2 to Subpart Dddd of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2012 CFR

2012-07-01

... part) Hydrogen chloride 62 parts per million by dry volume 3-run average (1 hour minimum sample time...) Sulfur dioxide 20 parts per million by dry volume 3-run average (1 hour minimum sample time per run...-8) or ASTM D6784-02 (Reapproved 2008).c Opacity 10 percent Three 1-hour blocks consisting of ten 6...

Critical Velocity Is Associated With Combat-Specific Performance Measures in a Special Forces Unit.

PubMed

Hoffman, Mattan W; Stout, Jeffrey R; Hoffman, Jay R; Landua, Geva; Fukuda, David H; Sharvit, Nurit; Moran, Daniel S; Carmon, Erez; Ostfeld, Ishay

2016-02-01

The purpose of this study was to examine the relationship between critical velocity (CV) and anaerobic distance capacity (ADC) to combat-specific tasks (CST) in a special forces (SFs) unit. Eighteen male soldiers (mean ± SD; age: 19.9 ± 0.8 years; height: 177.6 ± 6.6 cm; body mass: 74.1 ± 5.8 kg; body mass index [BMI]: 23.52 ± 1.63) from an SF unit of the Israel Defense Forces volunteered to complete a 3-minute all-out run along with CST (2.5-km run, 50-m casualty carry, and 30-m repeated sprints with "rush" shooting [RPTDS]). Estimates of CV and ADC from the 3-minute all-out run were determined from data downloaded from a global position system device worn by each soldier, with CV calculated as the average velocity of the final 30 seconds of the run and ADC as the velocity-time integral above CV. Critical velocity exhibited significant negative correlations with the 2.5-km run time (r = -0.62, p < 0.01) and RPTDS time (r = -0.71, p < 0.01). In addition, CV was positively correlated with the average velocity during the 2.5-km run (r = 0.64, p < 0.01). Stepwise regression identified CV as the most significant performance measure associated with the 2.5-km run time, whereas BMI and CV measures were significant predictors of RPTDS time (R(2) = 0.67, p ≤ 0.05). Using the 3-minute all-out run as a testing measurement in combat, personnel may offer a more efficient and simpler way in assessing both aerobic and anaerobic capabilities (CV and ADC) within a relatively large sample.

HIV-1 and HCV viral load cost models for bDNA: 440 Molecular System versus real-time PCR AmpliPrep/TaqMan test.

PubMed

Elbeik, Tarek; Dalessandro, Ralph; Loftus, Richard A; Beringer, Scott

2007-11-01

Comparative cost models were developed to assess cost-per-reportable result and annual costs for HIV-1 and HCV bDNA and AmpliPrep/TaqMan Test (PCR). Model cost components included kit, disposables, platform and related equipment, equipment service plan, equipment maintenance, equipment footprint, waste and labor. Model assessment was most cost-effective when run by bDNA with 36 or more clinical samples and PCR with 30 or fewer clinical samples. Lower costs are attained with maximum samples (84-168) run daily. Highest cost contributors include kit, platform and PCR proprietary disposables. Understanding component costs and the most economic use of HIV-1 and HCV viral load will aid in attaining lowest costs through selection of the appropriate assay and effective negotiations.

Experiences with Cray multi-tasking

NASA Technical Reports Server (NTRS)

Miya, E. N.

1985-01-01

The issues involved in modifying an existing code for multitasking is explored. They include Cray extensions to FORTRAN, an examination of the application code under study, designing workable modifications, specific code modifications to the VAX and Cray versions, performance, and efficiency results. The finished product is a faster, fully synchronous, parallel version of the original program. A production program is partitioned by hand to run on two CPUs. Loop splitting multitasks three key subroutines. Simply dividing subroutine data and control structure down the middle of a subroutine is not safe. Simple division produces results that are inconsistent with uniprocessor runs. The safest way to partition the code is to transfer one block of loops at a time and check the results of each on a test case. Other issues include debugging and performance. Task startup and maintenance (e.g., synchronization) are potentially expensive.

Shape prior modeling using sparse representation and online dictionary learning.

PubMed

Zhang, Shaoting; Zhan, Yiqiang; Zhou, Yan; Uzunbas, Mustafa; Metaxas, Dimitris N

2012-01-01

The recently proposed sparse shape composition (SSC) opens a new avenue for shape prior modeling. Instead of assuming any parametric model of shape statistics, SSC incorporates shape priors on-the-fly by approximating a shape instance (usually derived from appearance cues) by a sparse combination of shapes in a training repository. Theoretically, one can increase the modeling capability of SSC by including as many training shapes in the repository. However, this strategy confronts two limitations in practice. First, since SSC involves an iterative sparse optimization at run-time, the more shape instances contained in the repository, the less run-time efficiency SSC has. Therefore, a compact and informative shape dictionary is preferred to a large shape repository. Second, in medical imaging applications, training shapes seldom come in one batch. It is very time consuming and sometimes infeasible to reconstruct the shape dictionary every time new training shapes appear. In this paper, we propose an online learning method to address these two limitations. Our method starts from constructing an initial shape dictionary using the K-SVD algorithm. When new training shapes come, instead of re-constructing the dictionary from the ground up, we update the existing one using a block-coordinates descent approach. Using the dynamically updated dictionary, sparse shape composition can be gracefully scaled up to model shape priors from a large number of training shapes without sacrificing run-time efficiency. Our method is validated on lung localization in X-Ray and cardiac segmentation in MRI time series. Compared to the original SSC, it shows comparable performance while being significantly more efficient.

Development of a timing detector for the TOTEM experiment at the LHC

NASA Astrophysics Data System (ADS)

Minafra, Nicola

2017-09-01

The upgrade program of the TOTEM experiment will include the installation of timing detectors inside vertical Roman Pots to allow the reconstruction of the longitudinal vertex position in the presence of event pile-up in high- β^{\\ast} dedicated runs. The small available space inside the Roman Pot, optimized for high-intensity LHC runs, and the required time precision led to the study of a solution using single crystal CVD diamonds. The sensors are read out using fast low-noise front-end electronics developed by the TOTEM Collaboration, achieving a signal-to-noise ratio larger than 20 for MIPs. A prototype was designed, manufactured and tested during a test beam campaign, proving a time precision below 100ps and an efficiency above 99%. The geometry of the detector has been designed to guarantee uniform occupancy in the expected running conditions keeping, at the same time, the number of channels below 12. The read-out electronics was developed during an extensive campaign of beam tests dedicated first to the characterization of existing solution and then to the optimization of the electronics designed within the Collaboration. The detectors were designed to be read out using the SAMPIC chip, a fast sampler designed specifically for picosecond timing measurements with high-rate capabilities; later, a modified version was realized using the HPTDC to achieve the higher trigger rates required for the CT-PPS experiment. The first set of prototypes was successfully installed and tested in the LHC in November 2015; moreover the detectors modified for CT-PPS are successfully part of the global CMS data taking since October 2016.

Effect of metrology time delay on overlay APC

NASA Astrophysics Data System (ADS)

Carlson, Alan; DiBiase, Debra

2002-07-01

The run-to-run control strategy of lithography APC is primarily composed of a feedback loop as shown in the diagram below. It is known that the insertion of a time delay in a feedback loop can cause degradation in control performance and could even cause a stable system to become unstable, if the time delay becomes sufficiently large. Many proponents of integrated metrology methods have cited the damage caused by metrology time delays as the primary justification for moving from a stand-alone to integrated metrology. While there is little dispute over the qualitative form of this argument, there has been very light published about the quantitative effects under real fab conditions - precisely how much control is lost due to these time delays. Another issue regarding time delays is that the length of these delays is not typically fixed - they vary from lot to lot and in some cases this variance can be large - from one hour on the short side to over 32 hours on the long side. Concern has been expressed that the variability in metrology time delays can cause undesirable dynamics in feedback loops that make it difficult to optimize feedback filters and gains and at worst could drive a system unstable. By using data from numerous fabs, spanning many sizes and styles of operation, we have conducted a quantitative study of the time delay effect on overlay run- to-run control. Our analysis resulted in the following conclusions: (1) There is a significant and material relationship between metrology time delay and overlay control under a variety of real world production conditions. (2) The run-to-run controller can be configured to minimize sensitivity to time delay variations. (3) The value of moving to integrated metrology can be quantified.

PMARC_12 - PANEL METHOD AMES RESEARCH CENTER, VERSION 12

NASA Technical Reports Server (NTRS)

Ashby, D. L.

1994-01-01

Panel method computer programs are software tools of moderate cost used for solving a wide range of engineering problems. The panel code PMARC_12 (Panel Method Ames Research Center, version 12) can compute the potential flow field around complex three-dimensional bodies such as complete aircraft models. PMARC_12 is a well-documented, highly structured code with an open architecture that facilitates modifications and the addition of new features. Adjustable arrays are used throughout the code, with dimensioning controlled by a set of parameter statements contained in an include file; thus, the size of the code (i.e. the number of panels that it can handle) can be changed very quickly. This allows the user to tailor PMARC_12 to specific problems and computer hardware constraints. In addition, PMARC_12 can be configured (through one of the parameter statements in the include file) so that the code's iterative matrix solver is run entirely in RAM, rather than reading a large matrix from disk at each iteration. This significantly increases the execution speed of the code, but it requires a large amount of RAM memory. PMARC_12 contains several advanced features, including internal flow modeling, a time-stepping wake model for simulating either steady or unsteady (including oscillatory) motions, a Trefftz plane induced drag computation, off-body and on-body streamline computations, and computation of boundary layer parameters using a two-dimensional integral boundary layer method along surface streamlines. In a panel method, the surface of the body over which the flow field is to be computed is represented by a set of panels. Singularities are distributed on the panels to perturb the flow field around the body surfaces. PMARC_12 uses constant strength source and doublet distributions over each panel, thus making it a low order panel method. Higher order panel methods allow the singularity strength to vary linearly or quadratically across each panel. Experience has shown that low order panel methods can provide nearly the same accuracy as higher order methods over a wide range of cases with significantly reduced computation times; hence, the low order formulation was adopted for PMARC_12. The flow problem is solved by modeling the body as a closed surface dividing space into two regions: the region external to the surface in which an unknown velocity potential exists representing the flow field of interest, and the region internal to the surface in which a known velocity potential (representing a fictitious flow) is prescribed as a boundary condition. Both velocity potentials are required to satisfy Laplace's equation. A surface integral equation for the unknown potential external to the surface can be written by applying Green's Theorem to the external region. Using the internal potential and zero flow through the surface as boundary conditions, the unknown potential external to the surface can be solved for. When the internal flow option, which allows the analysis of closed ducts, wind tunnels, and similar internal flow problems, is selected, the geometry is modeled such that the flow field of interest is inside the geometry and the fictitious flow is outside the geometry. Items such as wings, struts, or aircraft models can be included in the internal flow problem. The time-stepping wake model gives PMARC_12 the ability to model both steady and unsteady flow problems. The wake is convected downstream from the wake-separation line by the local velocity field. With each time step, a new row of wake panels is added to the wake at the wake-separation line. Time stepping can start from time t=0 (no initial wake) or from time t=t0 (an initial wake is specified). A wide range of motions can be prescribed, including constant rates of translation, constant rate of rotation about an arbitrary axis, oscillatory translation, and oscillatory rotation about any of the three coordinate axes. Investigators interested in a visual representation of the phenomenon they are studying with PMARC_12 may want to consider obtaining the program GVS (ARC-13361), the General Visualization System. GVS is a Silicon Graphics IRIS program which was created for the purpose of supporting the scientific visualization needs of PMARC_12. GVS is available separately from COSMIC. PMARC_12 is written in standard FORTRAN 77, with the exception of the NAMELIST extension used for input. This makes the code fairly machine independent. A compiler which supports the NAMELIST extension is required. The amount of free disk space and RAM memory required for PMARC_12 will vary depending on how the code is dimensioned using the parameter statements in the include file. The recommended minimum requirements are 20Mb of free disk space and 4Mb of RAM. PMARC_12 has been successfully implemented on a Macintosh II running System 6.0.7 or 7.0 (using MPW/Language Systems Fortran 3.0), a Sun SLC running SunOS 4.1.1, an HP 720 running HP-UX 8.07, an SGI IRIS running IRIX 4.0 (it will not run under IRIX 3.x.x without modifications), an IBM RS/6000 running AIX, a DECstation 3100 running ULTRIX, and a CRAY-YMP running UNICOS 6.0 or later. Due to its memory requirements, this program does not readily lend itself to implementation on MS-DOS based machines. The standard distribution medium for PMARC_12 is a set of three 3.5 inch 800K Macintosh format diskettes and one 3.5 inch 1.44Mb Macintosh format diskette which contains an electronic copy of the documentation in MS Word 5.0 format for the Macintosh. Alternate distribution media and formats are available upon request, but these will not include the electronic version of the document. No executables are included on the distribution media. This program is an update to PMARC version 11, which was released in 1989. PMARC_12 was released in 1993. It is available only for use by United States citizens.

Changes in Contributions of Swimming, Cycling, and Running Performances on Overall Triathlon Performance Over a 26-Year Period.

PubMed

Figueiredo, Pedro; Marques, Elisa A; Lepers, Romuald

2016-09-01

Figueiredo, P, Marques, EA, and Lepers, R. Changes in contributions of swimming, cycling, and running performances on overall triathlon performance over a 26-year period. J Strength Cond Res 30(9): 2406-2415, 2016-This study examined the changes in the individual contribution of each discipline to the overall performance of Olympic and Ironman distance triathlons among men and women. Between 1989 and 2014, overall performances and their component disciplines (swimming, cycling and running) were analyzed from the top 50 overall male and female finishers. Regression analyses determined that for the Olympic distance, the split times in swimming and running decreased over the years (r = 0.25-0.43, p ≤ 0.05), whereas the cycling split and total time remained unchanged (p > 0.05), for both sexes. For the Ironman distance, the cycling and running splits and the total time decreased (r = 0.19-0.88, p ≤ 0.05), whereas swimming time remained stable, for both men and women. The average contribution of the swimming stage (∼18%) was smaller than the cycling and running stages (p ≤ 0.05), for both distances and both sexes. Running (∼47%) and then cycling (∼36%) had the greatest contribution to overall performance for the Olympic distance (∼47%), whereas for the Ironman distance, cycling and running presented similar contributions (∼40%, p > 0.05). Across the years, in the Olympic distance, swimming contribution significantly decreased for women and men (r = 0.51 and 0.68, p < 0.001, respectively), whereas running increased for men (r = 0.33, p = 0.014). In the Ironman distance, swimming and cycling contributions changed in an undulating fashion, being inverse between the two segments, for both sexes (p < 0.01), whereas running contribution decreased for men only (r = 0.61, p = 0.001). These findings highlight that strategies to improve running performance should be the main focus on the preparation to compete in the Olympic distance; whereas, in the Ironman, both cycling and running are decisive and should be well developed.

Parametric Study of Carbon Nanotube Production by Laser Ablation Process

NASA Technical Reports Server (NTRS)

Arepalli, Sivaram; Nikolaev, Pavel; Holmes, William; Hadjiev, Victor; Scott, Carl

2002-01-01

Carbon nanotubes form a new class of nanomaterials that are presumed to have extraordinary mechanical, electrical and thermal properties. The single wall nanotubes (SWNTs) are estimated to be 100 times stronger than steel with 1/6th the weight; electrical carrying capacity better than copper and thermal conductivity better than diamond. Applications of these SWNTs include possible weight reduction of aerospace structures, multifunctional materials, nanosensors and nanoelectronics. Double pulsed laser vaporization process produces SWNTs with the highest percentage of nanotubes in the output material. The normal operating conditions include a green laser pulse closely followed by an infrared laser pulse. Lasers ab late a metal-containing graphite target located in a flow tube maintained in an oven at 1473K with argon flow of 100 sccm at a 500 Torr pressure. In the present work a number of production runs were carried out, changing one operating condition at a time. We have studied the effects of nine parameters, including the sequencing of the laser pulses, pulse separation times, laser energy densities, the type of buffer gas used, oven temperature, operating pressure, flow rate and inner flow tube diameters. All runs were done using the same graphite target. The collected nanotube material was characterized by a variety of analytical techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman and thermo gravimetric analysis (TGA). Results indicate trends that could be used to optimize the process and increase the efficiency of the production process.

Reliability and validity of pressure and temporal parameters recorded using a pressure-sensitive insole during running.

PubMed

Mann, Robert; Malisoux, Laurent; Brunner, Roman; Gette, Paul; Urhausen, Axel; Statham, Andrew; Meijer, Kenneth; Theisen, Daniel

2014-01-01

Running biomechanics has received increasing interest in recent literature on running-related injuries, calling for new, portable methods for large-scale measurements. Our aims were to define running strike pattern based on output of a new pressure-sensitive measurement device, the Runalyser, and to test its validity regarding temporal parameters describing running gait. Furthermore, reliability of the Runalyser measurements was evaluated, as well as its ability to discriminate different running styles. Thirty-one healthy participants (30.3 ± 7.4 years, 1.78 ± 0.10 m and 74.1 ± 12.1 kg) were involved in the different study parts. Eleven participants were instructed to use a rearfoot (RFS), midfoot (MFS) and forefoot (FFS) strike pattern while running on a treadmill. Strike pattern was subsequently defined using a linear regression (R(2)=0.89) between foot strike angle, as determined by motion analysis (1000 Hz), and strike index (SI, point of contact on the foot sole, as a percentage of foot sole length), as measured by the Runalyser. MFS was defined by the 95% confidence interval of the intercept (SI=43.9-49.1%). High agreement (overall mean difference 1.2%) was found between stance time, flight time, stride time and duty factor as determined by the Runalyser and a force-measuring treadmill (n=16 participants). Measurements of the two devices were highly correlated (R ≥ 0.80) and not significantly different. Test-retest intra-class correlation coefficients for all parameters were ≥ 0.94 (n=14 participants). Significant differences (p<0.05) between FFS, RFS and habitual running were detected regarding SI, stance time and stride time (n=24 participants). The Runalyser is suitable for, and easily applicable in large-scale studies on running biomechanics. Copyright © 2013 Elsevier B.V. All rights reserved.

Transitionless driving on adiabatic search algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oh, Sangchul, E-mail: soh@qf.org.qa; Kais, Sabre, E-mail: kais@purdue.edu; Department of Chemistry, Department of Physics and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907

We study quantum dynamics of the adiabatic search algorithm with the equivalent two-level system. Its adiabatic and non-adiabatic evolution is studied and visualized as trajectories of Bloch vectors on a Bloch sphere. We find the change in the non-adiabatic transition probability from exponential decay for the short running time to inverse-square decay in asymptotic running time. The scaling of the critical running time is expressed in terms of the Lambert W function. We derive the transitionless driving Hamiltonian for the adiabatic search algorithm, which makes a quantum state follow the adiabatic path. We demonstrate that a uniform transitionless driving Hamiltonian,more » approximate to the exact time-dependent driving Hamiltonian, can alter the non-adiabatic transition probability from the inverse square decay to the inverse fourth power decay with the running time. This may open up a new but simple way of speeding up adiabatic quantum dynamics.« less

The Validity and Reliability of an iPhone App for Measuring Running Mechanics.

PubMed

Balsalobre-Fernández, Carlos; Agopyan, Hovannes; Morin, Jean-Benoit

2017-07-01

The purpose of this investigation was to analyze the validity of an iPhone application (Runmatic) for measuring running mechanics. To do this, 96 steps from 12 different runs at speeds ranging from 2.77-5.55 m·s -1 were recorded simultaneously with Runmatic, as well as with an opto-electronic device installed on a motorized treadmill to measure the contact and aerial time of each step. Additionally, several running mechanics variables were calculated using the contact and aerial times measured, and previously validated equations. Several statistics were computed to test the validity and reliability of Runmatic in comparison with the opto-electronic device for the measurement of contact time, aerial time, vertical oscillation, leg stiffness, maximum relative force, and step frequency. The running mechanics values obtained with both the app and the opto-electronic device showed a high degree of correlation (r = .94-.99, p < .001). Moreover, there was very close agreement between instruments as revealed by the ICC (2,1) (ICC = 0.965-0.991). Finally, both Runmatic and the opto-electronic device showed almost identical reliability levels when measuring each set of 8 steps for every run recorded. In conclusion, Runmatic has been proven to be a highly reliable tool for measuring the running mechanics studied in this work.

Effects of Short or Long Warm-up on Intermediate Running Performance.

PubMed

van den Tillaar, Roland; Vatten, Tormod; von Heimburg, Erna

2017-01-01

van den Tillaar, R, Vatten, T, and von Heimburg, E. Effects of short or long warm-up on intermediate running performance. J Strength Cond Res 31(1): 37-44, 2017-The aim of the study was to compare the effects of a long warm-up (general + specific) and a short warm-up (specific) on intermediate running performance (3-minute run). Thirteen experienced endurance-trained athletes (age 23.2 ± 2.3 years, body mass 79.8 ± 8.2 kg, body height 1.82 ± 0.05 m) conducted 2 types of warm-ups in a crossover design with 1 week in between: a long warm-up (10 minutes, 80% maximal heart rate, and 8 × 60 m sprint with increasing intensity and 1 minute rest in between) and a short warm-up (8 × 60 m sprint with increasing intensity and 1 minute rest in between). Each warm-up was followed by a 3-minute running test on a nonmotorized treadmill. Total running distance, running velocity at each 30 seconds, heart rate, blood lactate concentration, oxygen uptake, and rate of perceived exertion were measured. No significant differences in running performance variables and physiological parameters were found between the 2 warm-up protocols, except for the rate of perceived exertion and heart rate, which were higher after the long warm-up and after the 3-minute running test compared with the short warm-up. It was concluded that a short warm-up is as effective as a long warm-up for intermediate performance. Therefore, athletes can choose for themselves if they want to include a general part in their warm-up routines, even though it would not enhance their running performance more compared with only using a short, specific warm-up. However, to increase efficiency of time for training or competition, these short, specific warm-ups should be performed instead of long warm-ups.

78 FR 61946 - Pheasant Run Wind II, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-07

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-2462-000] Pheasant Run Wind II, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket... Run Wind II, LLC's application for market-based rate authority, with an accompanying rate schedule...

78 FR 31593 - Aleris Recycling Bens Run, LLC, Including On-Site Leased Workers From Winans Extras Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,388] Aleris Recycling Bens Run, LLC, Including On-Site Leased Workers From Winans Extras Support Staffing and CDI Corporation... (TAA) applicable to workers and former workers of Aleris Recycling Bens Run, LLC, Friendly, West...

Collecting and Applying Usability Data from Distance Learners

ERIC Educational Resources Information Center

Mitchell, Emily; West, Brandon

2017-01-01

Growth of their college's off-campus and online course offerings led librarians at SUNY Oswego to run usability tests with off-campus students to compensate for a lack of responses from this population during earlier usability testing. Constraints on testing with off-campus students included lack of funding and librarian time, as well as…

Use of a Modern Polymerization Pilot-Plant for Undergraduate Control Projects.

ERIC Educational Resources Information Center

Mendoza-Bustos, S. A.; And Others

1991-01-01

Described is a project where students gain experience in handling large volumes of hazardous materials, process start up and shut down, equipment failures, operational variations, scaling up, equipment cleaning, and run-time scheduling while working in a modern pilot plant. Included are the system design, experimental procedures, and results. (KR)

The First Whole Library Catalog; Access to Film.

ERIC Educational Resources Information Center

1973

Films available from Films Incorporated are listed in this catalog under the following five headings: Art and Culture, Education and Information, Economy and Society, Health and Medicine, and the World Around Us. Each citation includes such data as the film's producer, director, cast, date, running time and whether it is in color, provides a…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bush, Brian W; Brunhart-Lupo, Nicholas J; Gruchalla, Kenny M

This brochure describes a system dynamics simulation (SD) framework that supports an end-to-end analysis workflow that is optimized for deployment on ESIF facilities(Peregrine and the Insight Center). It includes (I) parallel and distributed simulation of SD models, (ii) real-time 3D visualization of running simulations, and (iii) comprehensive database-oriented persistence of simulation metadata, inputs, and outputs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bush, Brian W; Brunhart-Lupo, Nicholas J; Gruchalla, Kenny M

This presentation describes a system dynamics simulation (SD) framework that supports an end-to-end analysis workflow that is optimized for deployment on ESIF facilities(Peregrine and the Insight Center). It includes (I) parallel and distributed simulation of SD models, (ii) real-time 3D visualization of running simulations, and (iii) comprehensive database-oriented persistence of simulation metadata, inputs, and outputs.

Evaluating real-time Java for mission-critical large-scale embedded systems

NASA Technical Reports Server (NTRS)

Sharp, D. C.; Pla, E.; Luecke, K. R.; Hassan, R. J.

2003-01-01

This paper describes benchmarking results on an RT JVM. This paper extends previously published results by including additional tests, by being run on a recently available pre-release version of the first commercially supported RTSJ implementation, and by assessing results based on our experience with avionics systems in other languages.

Intervention for Young Children Displaying Coordination Disorders

ERIC Educational Resources Information Center

Chambers, Mary E.; Sugden, David A.

2016-01-01

The years from 3 to 6 are a time when children develop fundamental movement skills that are the building blocks for the functional movements they use throughout their lives. By 6 years of age, a typically developing child will have in place a full range of movement skills, including, running, jumping, hopping, skipping, climbing, throwing,…

Straight A's: Public Education Policy and Progress. Volume 10, Number 19

ERIC Educational Resources Information Center

Alliance for Excellent Education, 2010

2010-01-01

"Straight A's: Public Education Policy and Progress" is a biweekly newsletter that focuses on education news and events both in Washington, DC and around the country. The following articles are included in this issue: (1) To Be Continued: Congress Passes Continuing Resolution to Keep Government Running, Buys Time to Pass Appropriations…

Surviving Tight Times or What to Do When the Money Runs Out.

ERIC Educational Resources Information Center

Neugebauer, Roger

1987-01-01

Recommends strategies to help for-profit and non-profit child care centers survive financial crises. These strategies include discovering the source of the problem; monitoring cash flow; trimming the budget; slowing cash outflow; speeding cash inflow; exploring new income sources; enduring the strain effectively; and avoiding crisis repetition.…

Hot-wire anemometry in hypersonic helium flow

NASA Technical Reports Server (NTRS)

Wagner, R. D.; Weinstein, L. M.

1974-01-01

Hot-wire anemometry techniques are described that have been developed and used for hypersonic-helium-flow studies. The short run time available dictated certain innovations in applying conventional hot-wire techniques. Some examples are given to show the application of the techniques used. Modifications to conventional equipment are described, including probe modifications and probe heating controls.

12 CFR 1070.22 - Fees for processing requests for CFPB records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CFPB shall charge the requester for the actual direct cost of the search, including computer search time, runs, and the operator's salary. The fee for computer output will be the actual direct cost. For... and the cost of operating the computer to process a request) equals the equivalent dollar amount of...

Users Manual for the Geospatial Stream Flow Model (GeoSFM)

USGS Publications Warehouse

Artan, Guleid A.; Asante, Kwabena; Smith, Jodie; Pervez, Md Shahriar; Entenmann, Debbie; Verdin, James P.; Rowland, James

2008-01-01

The monitoring of wide-area hydrologic events requires the manipulation of large amounts of geospatial and time series data into concise information products that characterize the location and magnitude of the event. To perform these manipulations, scientists at the U.S. Geological Survey Center for Earth Resources Observation and Science (EROS), with the cooperation of the U.S. Agency for International Development, Office of Foreign Disaster Assistance (USAID/OFDA), have implemented a hydrologic modeling system. The system includes a data assimilation component to generate data for a Geospatial Stream Flow Model (GeoSFM) that can be run operationally to identify and map wide-area streamflow anomalies. GeoSFM integrates a geographical information system (GIS) for geospatial preprocessing and postprocessing tasks and hydrologic modeling routines implemented as dynamically linked libraries (DLLs) for time series manipulations. Model results include maps that depicting the status of streamflow and soil water conditions. This Users Manual provides step-by-step instructions for running the model and for downloading and processing the input data required for initial model parameterization and daily operation.

Closed cycle electric discharge laser design investigation

NASA Technical Reports Server (NTRS)

Baily, P. K.; Smith, R. C.

1978-01-01

Closed cycle CO2 and CO electric discharge lasers were studied. An analytical investigation assessed scale-up parameters and design features for CO2, closed cycle, continuous wave, unstable resonator, electric discharge lasing systems operating in space and airborne environments. A space based CO system was also examined. The program objectives were the conceptual designs of six CO2 systems and one CO system. Three airborne CO2 designs, with one, five, and ten megawatt outputs, were produced. These designs were based upon five minute run times. Three space based CO2 designs, with the same output levels, were also produced, but based upon one year run times. In addition, a conceptual design for a one megawatt space based CO laser system was also produced. These designs include the flow loop, compressor, and heat exchanger, as well as the laser cavity itself. The designs resulted in a laser loop weight for the space based five megawatt system that is within the space shuttle capacity. For the one megawatt systems, the estimated weight of the entire system including laser loop, solar power generator, and heat radiator is less than the shuttle capacity.

High heat flux measurements and experimental calibrations/characterizations

NASA Technical Reports Server (NTRS)

Kidd, Carl T.

1992-01-01

Recent progress in techniques employed in the measurement of very high heat-transfer rates in reentry-type facilities at the Arnold Engineering Development Center (AEDC) is described. These advances include thermal analyses applied to transducer concepts used to make these measurements; improved heat-flux sensor fabrication methods, equipment, and procedures for determining the experimental time response of individual sensors; performance of absolute heat-flux calibrations at levels above 2,000 Btu/cu ft-sec (2.27 kW/cu cm); and innovative methods of performing in-situ run-to-run characterizations of heat-flux probes installed in the test facility. Graphical illustrations of the results of extensive thermal analyses of the null-point calorimeter and coaxial surface thermocouple concepts with application to measurements in aerothermal test environments are presented. Results of time response experiments and absolute calibrations of null-point calorimeters and coaxial thermocouples performed in the laboratory at intermediate to high heat-flux levels are shown. Typical AEDC high-enthalpy arc heater heat-flux data recently obtained with a Calspan-fabricated null-point probe model are included.

Effect of 8 weeks of concurrent plyometric and running training on spatiotemporal and physiological variables of novice runners.

PubMed

Gómez-Molina, Josué; Ogueta-Alday, Ana; Camara, Jesus; Stickley, Christopher; García-López, Juan

2018-03-01

Concurrent plyometric and running training has the potential to improve running economy (RE) and performance through increasing muscle strength and power, but the possible effect on spatiotemporal parameters of running has not been studied yet. The aim of this study was to compare the effect of 8 weeks of concurrent plyometric and running training on spatiotemporal parameters and physiological variables of novice runners. Twenty-five male participants were randomly assigned into two training groups; running group (RG) (n = 11) and running + plyometric group (RPG) (n = 14). Both groups performed 8 weeks of running training programme, and only the RPG performed a concurrent plyometric training programme (two sessions per week). Anthropometric, physiological (VO 2max , heart rate and RE) and spatiotemporal variables (contact and flight times, step rate and length) were registered before and after the intervention. In comparison to RG, the RPG reduced step rate and increased flight times at the same running speeds (P < .05) while contact times remained constant. Significant increases in pre- and post-training (P < .05) were found in RPG for squat jump and 5 bound test, while RG remained unchanged. Peak speed, ventilatory threshold (VT) speed and respiratory compensation threshold (RCT) speed increased (P < .05) for both groups, although peak speed and VO 2max increased more in the RPG than in the RG. In conclusion, concurrent plyometric and running training entails a reduction in step rate, as well as increases in VT speed, RCT speed, peak speed and VO 2max . Athletes could benefit from plyometric training in order to improve their strength, which would contribute to them attaining higher running speeds.

Toward real-time performance benchmarks for Ada

NASA Technical Reports Server (NTRS)

Clapp, Russell M.; Duchesneau, Louis; Volz, Richard A.; Mudge, Trevor N.; Schultze, Timothy

1986-01-01

The issue of real-time performance measurements for the Ada programming language through the use of benchmarks is addressed. First, the Ada notion of time is examined and a set of basic measurement techniques are developed. Then a set of Ada language features believed to be important for real-time performance are presented and specific measurement methods discussed. In addition, other important time related features which are not explicitly part of the language but are part of the run-time related features which are not explicitly part of the language but are part of the run-time system are also identified and measurement techniques developed. The measurement techniques are applied to the language and run-time system features and the results are presented.

Run charts revisited: a simulation study of run chart rules for detection of non-random variation in health care processes.

PubMed

Anhøj, Jacob; Olesen, Anne Vingaard

2014-01-01

A run chart is a line graph of a measure plotted over time with the median as a horizontal line. The main purpose of the run chart is to identify process improvement or degradation, which may be detected by statistical tests for non-random patterns in the data sequence. We studied the sensitivity to shifts and linear drifts in simulated processes using the shift, crossings and trend rules for detecting non-random variation in run charts. The shift and crossings rules are effective in detecting shifts and drifts in process centre over time while keeping the false signal rate constant around 5% and independent of the number of data points in the chart. The trend rule is virtually useless for detection of linear drift over time, the purpose it was intended for.

The Impact of a Food Elimination Diet on Collegiate Athletes' 300-meter Run Time and Concentration

PubMed Central

Breshears, Karen; Baker, David McA.

2014-01-01

Background: Optimal human function and performance through diet strategies are critical for everyone but especially for those involved in collegiate or professional athletics. Currently, individualized medicine (IM) is emerging as a more efficacious approach to health with emphasis on personalized diet strategies for the public and is common practice for elite athletes. One method for directing patient-specific foods in the diet, while concomitantly impacting physical performance, may be via IgG food sensitivity and Candida albicans analysis from dried blood spot (DBS) collections. Methods: The authors designed a quasi-experimental, nonrandomized, pilot study without a control group. Twenty-three participants, 15 female, 8 male, from soccer/volleyball and football athletic teams, respectively, mean age 19.64+0.86 years, were recruited for the study, which examined preposttest 300-meter run times and questionnaire responses after a 14-day IgG DBS–directed food elimination diet based on IgG reactivity to 93 foods. DBS specimen collection, 300-meter run times, and Learning Difficulties Assessment (LDA) questionnaires were collected at the participants' university athletics building on campus. IgG, C albicans, and S cerevisiae analyses were conducted at the Great Plains Laboratory, Lenexa, Kansas. Results: Data indicated a change in 300-meter run time but not of statistical significance (run time baseline mean=50.41 sec, run time intervention mean=50.14 sec). Descriptive statistics for frequency of responses and chi-square analysis revealed that 4 of the 23 items selected from the LDA (Listening-Memory and Concentration subscale R=.8669; Listening-Information Processing subscale R=.8517; and General Concentration and Memory subscale R=.9019) were improved posttest. Conclusion: The study results did not indicate merit in eliminating foods based on IgG reactivity for affecting athletic performance (faster 300-meter run time) but did reveal potential for affecting academic qualities of listening, information processing, concentration, and memory. Further studies are warranted evaluating IgG-directed food elimination diets for improving run time, concentration, and memory among college athletes as well as among other populations. PMID:25568830

Local corticosteroid injection in iliotibial band friction syndrome in runners: a randomised controlled trial

PubMed Central

Gunter, P; Schwellnus, M; Fuller, P

2004-01-01

Objective: To establish whether a local injection of methylprednisolone acetate (40 mg) is effective in decreasing pain during running in runners with recent onset (less than two weeks) iliotibial band friction syndrome (ITBFS). Methods: Eighteen runners with at least grade 2 ITBFS underwent baseline investigations including a treadmill running test during which pain was recorded on a visual analogue scale every minute. The runners were then randomly assigned to either the experimental (EXP; nine) or a placebo control (CON; nine) group. The EXP group was infiltrated in the area where the iliotibial band crosses the lateral femoral condyle with 40 mg methylprednisolone acetate mixed with a short acting local anaesthetic, and the CON group with short acting local anaesthetic only. The same laboratory based running test was repeated after seven and 14 days. The main measure of outcome was total pain during running (calculated as the area under the pain versus time graph for each running test). Results: There was a tendency (p = 0.07) for a greater decrease in total pain (mean (SEM)) during the treadmill running in the EXP group than the CON group tests from day 0 (EXP = 222 (71), CON = 197 (31)) to day 7 (EXP = 140 (87), CON = 178 (76)), but there was a significant decrease in total pain during running (p = 0.01) from day 7 (EXP = 140 (87), CON = 178 (76)) to day 14 (EXP = 103 (89), CON = 157 (109)) in the EXP group compared with the CON group. Conclusion: Local corticosteroid infiltration effectively decreases pain during running in the first two weeks of treatment in patients with recent onset ITBFS. PMID:15155424

Changes in Running Mechanics During a 6-Hour Running Race.

PubMed

Giovanelli, Nicola; Taboga, Paolo; Lazzer, Stefano

2017-05-01

To investigate changes in running mechanics during a 6-h running race. Twelve ultraendurance runners (age 41.9 ± 5.8 y, body mass 68.3 ± 12.6 kg, height 1.72 ± 0.09 m) were asked to run as many 874-m flat loops as possible in 6 h. Running speed, contact time (t c ), and aerial time (t a ) were measured in the first lap and every 30 ± 2 min during the race. Peak vertical ground-reaction force (F max ), stride length (SL), vertical downward displacement of the center of mass (Δz), leg-length change (ΔL), vertical stiffness (k vert ), and leg stiffness (k leg ) were then estimated. Mean distance covered by the athletes during the race was 62.9 ± 7.9 km. Compared with the 1st lap, running speed decreased significantly from 4 h 30 min onward (mean -5.6% ± 0.3%, P < .05), while t c increased after 4 h 30 min of running, reaching the maximum difference after 5 h 30 min (+6.1%, P = .015). Conversely, k vert decreased after 4 h, reaching the lowest value after 5 h 30 min (-6.5%, P = .008); t a and F max decreased after 4 h 30 min through to the end of the race (mean -29.2% and -5.1%, respectively, P < .05). Finally, SL decreased significantly (-5.1%, P = .010) during the last hour of the race. Most changes occurred after 4 h continuous self-paced running, suggesting a possible time threshold that could affect performance regardless of absolute running speed.

Reliability of Leg and Vertical Stiffness During High Speed Treadmill Running.

PubMed

Pappas, Panagiotis; Dallas, Giorgos; Paradisis, Giorgos

2017-04-01

In research, the accurate and reliable measurement of leg and vertical stiffness could contribute to valid interpretations. The current study aimed at determining the intraparticipant variability (ie, intraday and interday reliabilities) of leg and vertical stiffness, as well as related parameters, during high speed treadmill running, using the "sine-wave" method. Thirty-one males ran on a treadmill at 6.67 m∙s -1 , and the contact and flight times were measured. To determine the intraday reliability, three 10-s running bouts with 10-min recovery were performed. In addition, to examine the interday reliability, three 10-s running bouts on 3 separate days with 48-h interbout intervals were performed. The reliability statistics included repeated-measure analysis of variance, average intertrial correlations, intraclass correlation coefficients (ICCs), Cronbach's α reliability coefficient, and the coefficient of variation (CV%). Both intraday and interday reliabilities were high for leg and vertical stiffness (ICC > 0.939 and CV < 4.3%), as well as related variables (ICC > 0.934 and CV < 3.9%). It was thus inferred that the measurements of leg and vertical stiffness, as well as the related parameters obtained using the "sine-wave" method during treadmill running at 6.67 m∙s -1 , were highly reliable, both within and across days.

Speckle interferometry at SOAR in 2012 and 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokovinin, Andrei; Mason, Brian D.; Hartkopf, William I., E-mail: atokovinin@ctio.noao.edu, E-mail: bdm@usno.navy.mil, E-mail: wih@usno.navy.mil

2014-05-01

We report the results of speckle runs at the 4.1 m Southern Astronomical Research telescope in 2012 and 2013. A total of 586 objects were observed. We give 699 measurements of 487 resolved binaries and upper detection limits for 112 unresolved stars. Eleven pairs (including one triple) were resolved for the first time. Orbital elements have been determined for the first time for 13 pairs; orbits of another 45 binaries are revised or updated.

The immediate effect of long-distance running on T2 and T2* relaxation times of articular cartilage of the knee in young healthy adults at 3.0 T MR imaging

PubMed Central

Welsch, Goetz H; Laqmani, Azien; Henes, Frank O; Kaul, Michael G; Schoen, Gerhard; Adam, Gerhard; Regier, Marc

2016-01-01

Objective: To quantitatively assess the immediate effect of long-distance running on T2 and T2* relaxation times of the articular cartilage of the knee at 3.0 T in young healthy adults. Methods: 30 healthy male adults (18–31 years) who perform sports at an amateur level underwent an initial MRI at 3.0 T with T2 weighted [16 echo times (TEs): 9.7–154.6 ms] and T2* weighted (24 TEs: 4.6–53.6 ms) relaxation measurements. Thereafter, all participants performed a 45-min run. After the run, all individuals were immediately re-examined. Data sets were post-processed using dedicated software (ImageJ; National Institute of Health, Bethesda, MD). 22 regions of interest were manually drawn in segmented areas of the femoral, tibial and patellar cartilage. For statistical evaluation, Pearson product–moment correlation coefficients and confidence intervals were computed. Results: Mean initial values were 35.7 ms for T2 and 25.1 ms for T2*. After the run, a significant decrease in the mean T2 and T2* relaxation times was observed for all segments in all participants. A mean decrease of relaxation time was observed for T2 with 4.6 ms (±3.6 ms) and for T2* with 3.6 ms (±5.1 ms) after running. Conclusion: A significant decrease could be observed in all cartilage segments for both biomarkers. Both quantitative techniques, T2 and T2*, seem to be valuable parameters in the evaluation of immediate changes in the cartilage ultrastructure after running. Advances in knowledge: This is the first direct comparison of immediate changes in T2 and T2* relaxation times after running in healthy adults. PMID:27336705

The immediate effect of long-distance running on T2 and T2* relaxation times of articular cartilage of the knee in young healthy adults at 3.0 T MR imaging.

PubMed

Behzadi, Cyrus; Welsch, Goetz H; Laqmani, Azien; Henes, Frank O; Kaul, Michael G; Schoen, Gerhard; Adam, Gerhard; Regier, Marc

2016-08-01

To quantitatively assess the immediate effect of long-distance running on T2 and T2* relaxation times of the articular cartilage of the knee at 3.0 T in young healthy adults. 30 healthy male adults (18-31 years) who perform sports at an amateur level underwent an initial MRI at 3.0 T with T2 weighted [16 echo times (TEs): 9.7-154.6 ms] and T2* weighted (24 TEs: 4.6-53.6 ms) relaxation measurements. Thereafter, all participants performed a 45-min run. After the run, all individuals were immediately re-examined. Data sets were post-processed using dedicated software (ImageJ; National Institute of Health, Bethesda, MD). 22 regions of interest were manually drawn in segmented areas of the femoral, tibial and patellar cartilage. For statistical evaluation, Pearson product-moment correlation coefficients and confidence intervals were computed. Mean initial values were 35.7 ms for T2 and 25.1 ms for T2*. After the run, a significant decrease in the mean T2 and T2* relaxation times was observed for all segments in all participants. A mean decrease of relaxation time was observed for T2 with 4.6 ms (±3.6 ms) and for T2* with 3.6 ms (±5.1 ms) after running. A significant decrease could be observed in all cartilage segments for both biomarkers. Both quantitative techniques, T2 and T2*, seem to be valuable parameters in the evaluation of immediate changes in the cartilage ultrastructure after running. This is the first direct comparison of immediate changes in T2 and T2* relaxation times after running in healthy adults.

Effect of recording duration on the diagnostic performance of multifocal visual-evoked potentials in high-risk ocular hypertension and early glaucoma.

PubMed

Fortune, Brad; Zhang, Xian; Hood, Donald C; Demirel, Shaban; Patterson, Emily; Jamil, Annisa; Mansberger, Steven L; Cioffi, George A; Johnson, Chris A

2008-01-01

To evaluate the effect on diagnostic performance of reducing multifocal visual-evoked potential (mfVEP) recording duration from 16 to 8 minutes per eye. Both eyes of 185 individuals with high-risk ocular hypertension or early glaucoma were studied. Two 8-minute mfVEP recordings were obtained for each eye in an ABBA order using VERIS. The first recording for each eye was compared against single run (1-Run) mfVEP normative data; the average of both recordings for each eye was compared against 2-Run normative data. Visual fields (VFs) were obtained by standard automated perimetry (SAP) within 22.3+/-27.0 days of the mfVEP. Stereo disc photographs and Heidelberg Retina Tomograph images were obtained together, within 24.8+/-50.4 days of the mfVEP and 33.1+/-62.9 days of SAP. Masked experts graded disc photographs as either glaucomatous optic neuropathy or normal. The overall Moorfields Regression Analysis result from the Heidelberg Retina Tomograph was used as a separate diagnostic classification. Thus, 4 diagnostic standards were applied in total, 2 based on optic disc structure alone and 2 others based on disc structure and SAP. Agreement between the 1-Run and 2-Run mfVEP was 90%. Diagnostic performance of the 1-Run mfVEP was similar to that of the 2-Run mfVEP for all 4 diagnostic standards. Sensitivity was slightly higher for the 2-Run mfVEP, whereas specificity was slightly higher for the 1-Run mfVEP. If higher sensitivity is sought, the 2-Run mfVEP will provide better discrimination between groups of eyes with relatively high signal-to-noise ratio (eg, early glaucoma or high-risk suspects). But if higher specificity is a more important goal, the 1-Run mfVEP provides adequate sensitivity and requires only half the test time. Considered alongside prior studies, the present results suggest that the 1-Run mfVEP is an efficient way to confirm (or refute) the extent of VF loss in patients with moderate or advanced glaucoma, particularly in those with unreliable VFs, including malingering or other "functional" forms of VF loss.

Performance analysis of a large-grain dataflow scheduling paradigm

NASA Technical Reports Server (NTRS)

Young, Steven D.; Wills, Robert W.

1993-01-01

A paradigm for scheduling computations on a network of multiprocessors using large-grain data flow scheduling at run time is described and analyzed. The computations to be scheduled must follow a static flow graph, while the schedule itself will be dynamic (i.e., determined at run time). Many applications characterized by static flow exist, and they include real-time control and digital signal processing. With the advent of computer-aided software engineering (CASE) tools for capturing software designs in dataflow-like structures, macro-dataflow scheduling becomes increasingly attractive, if not necessary. For parallel implementations, using the macro-dataflow method allows the scheduling to be insulated from the application designer and enables the maximum utilization of available resources. Further, by allowing multitasking, processor utilizations can approach 100 percent while they maintain maximum speedup. Extensive simulation studies are performed on 4-, 8-, and 16-processor architectures that reflect the effects of communication delays, scheduling delays, algorithm class, and multitasking on performance and speedup gains.

Pairwise velocities in the "Running FLRW" cosmological model

NASA Astrophysics Data System (ADS)

Bibiano, Antonio; Croton, Darren J.

2017-05-01

We present an analysis of the pairwise velocity statistics from a suite of cosmological N-body simulations describing the 'Running Friedmann-Lemaître-Robertson-Walker' (R-FLRW) cosmological model. This model is based on quantum field theory in a curved space-time and extends Λ cold dark matter (CDM) with a time-evolving vacuum energy density, ρ _Λ. To enforce local conservation of matter, a time-evolving gravitational coupling is also included. Our results constitute the first study of velocities in the R-FLRW cosmology, and we also compare with other dark energy simulations suites, repeating the same analysis. We find a strong degeneracy between the pairwise velocity and σ8 at z = 0 for almost all scenarios considered, which remains even when we look back to epochs as early as z = 2. We also investigate various coupled dark energy models, some of which show minimal degeneracy, and reveal interesting deviations from ΛCDM that could be readily exploited by future cosmological observations to test and further constrain our understanding of dark energy.

Digital Access to a Sky Century at Harvard: Initial Photometry and Astrometry

NASA Astrophysics Data System (ADS)

Laycock, S.; Tang, S.; Grindlay, J.; Los, E.; Simcoe, R.; Mink, D.

2010-10-01

Digital Access to a Sky Century at Harvard (DASCH) is a project to digitize the collection of ~500,000 glass photographic plates held at Harvard College Observatory. The collection spans the time period from 1880 to 1985, during which time every point on the sky was been observed from 500 to 1000 times. In this paper, we describe the DASCH commissioning run, during which we developed the data-reduction pipeline, characterized the plates and fine-tuned the digitizer's performance and operation. This initial run consisted of 500 plates taken from a variety of different plate series, all containing the open cluster Praeseppe (M44). We report that accurate photometry at the 0.1 mag level is possible on the majority of plates, and demonstrate century-long light curves of various types of variable stars in and around M44. DASCH will generate a public online archive of the entire plate collection, including images, source catalogs, and light curves for nearly all astronomical objects brighter than about 17th magnitude.

Validity of Treadmill-Derived Critical Speed on Predicting 5000-Meter Track-Running Performance.

PubMed

Nimmerichter, Alfred; Novak, Nina; Triska, Christoph; Prinz, Bernhard; Breese, Brynmor C

2017-03-01

Nimmerichter, A, Novak, N, Triska, C, Prinz, B, and Breese, BC. Validity of treadmill-derived critical speed on predicting 5,000-meter track-running performance. J Strength Cond Res 31(3): 706-714, 2017-To evaluate 3 models of critical speed (CS) for the prediction of 5,000-m running performance, 16 trained athletes completed an incremental test on a treadmill to determine maximal aerobic speed (MAS) and 3 randomly ordered runs to exhaustion at the [INCREMENT]70% intensity, at 110% and 98% of MAS. Critical speed and the distance covered above CS (D') were calculated using the hyperbolic speed-time (HYP), the linear distance-time (LIN), and the linear speed inverse-time model (INV). Five thousand meter performance was determined on a 400-m running track. Individual predictions of 5,000-m running time (t = [5,000-D']/CS) and speed (s = D'/t + CS) were calculated across the 3 models in addition to multiple regression analyses. Prediction accuracy was assessed with the standard error of estimate (SEE) from linear regression analysis and the mean difference expressed in units of measurement and coefficient of variation (%). Five thousand meter running performance (speed: 4.29 ± 0.39 m·s; time: 1,176 ± 117 seconds) was significantly better than the predictions from all 3 models (p < 0.0001). The mean difference was 65-105 seconds (5.7-9.4%) for time and -0.22 to -0.34 m·s (-5.0 to -7.5%) for speed. Predictions from multiple regression analyses with CS and D' as predictor variables were not significantly different from actual running performance (-1.0 to 1.1%). The SEE across all models and predictions was approximately 65 seconds or 0.20 m·s and is therefore considered as moderate. The results of this study have shown the importance of aerobic and anaerobic energy system contribution to predict 5,000-m running performance. Using estimates of CS and D' is valuable for predicting performance over race distances of 5,000 m.

Flame-Vortex Studies to Quantify Markstein Numbers Needed to Model Flame Extinction Limits

NASA Technical Reports Server (NTRS)

Driscoll, James F.; Feikema, Douglas A.

2003-01-01

This has quantified a database of Markstein numbers for unsteady flames; future work will quantify a database of flame extinction limits for unsteady conditions. Unsteady extinction limits have not been documented previously; both a stretch rate and a residence time must be measured, since extinction requires that the stretch rate be sufficiently large for a sufficiently long residence time. Ma was measured for an inwardly-propagating flame (IPF) that is negatively-stretched under microgravity conditions. Computations also were performed using RUN-1DL to explain the measurements. The Markstein number of an inwardly-propagating flame, for both the microgravity experiment and the computations, is significantly larger than that of an outwardy-propagating flame. The computed profiles of the various species within the flame suggest reasons. Computed hydrogen concentrations build up ahead of the IPF but not the OPF. Understanding was gained by running the computations for both simplified and full-chemistry conditions. Numerical Simulations. To explain the experimental findings, numerical simulations of both inwardly and outwardly propagating spherical flames (with complex chemistry) were generated using the RUN-1DL code, which includes 16 species and 46 reactions.

Actual situation analyses of rat-run traffic on community streets based on car probe data

NASA Astrophysics Data System (ADS)

Sakuragi, Yuki; Matsuo, Kojiro; Sugiki, Nao

2017-10-01

Lowering of so-called "rat-run" traffic on community streets has been one of significant challenges for improving the living environment of neighborhood. However, it has been difficult to quantitatively grasp the actual situation of rat-run traffic by the traditional surveys such as point observations. This study aims to develop a method for extracting rat-run traffic based on car probe data. In addition, based on the extracted rat-run traffic in Toyohashi city, Japan, we try to analyze the actual situation such as time and location distribution of the rat-run traffic. As a result, in Toyohashi city, the rate of using rat-run route increases in peak time period. Focusing on the location distribution of rat-run traffic, in addition, they pass through a variety of community streets. There is no great inter-district bias of the route frequently used as rat-run traffic. Next, we focused on some trips passing through a heavily used route as rat-run traffic. As a result, we found the possibility that they habitually use the route as rat-run because their trips had some commonalities. We also found that they tend to use the rat-run route due to shorter distance than using the alternative highway route, and that the travel speeds were faster than using the alternative highway route. In conclusions, we confirmed that the proposed method can quantitatively grasp the actual situation and the phenomenal tendencies of the rat-run traffic.

Voluntary wheel running in dystrophin-deficient (mdx) mice: Relationships between exercise parameters and exacerbation of the dystrophic phenotype.

PubMed

Smythe, Gayle M; White, Jason D

2011-12-18

Voluntary wheel running can potentially be used to exacerbate the disease phenotype in dystrophin-deficient mdx mice. While it has been established that voluntary wheel running is highly variable between individuals, the key parameters of wheel running that impact the most on muscle pathology have not been examined in detail. We conducted a 2-week test of voluntary wheel running by mdx mice and the impact of wheel running on disease pathology. There was significant individual variation in the average daily distance (ranging from 0.003 ± 0.005 km to 4.48 ± 0.96 km), culminating in a wide range (0.040 km to 67.24 km) of total cumulative distances run by individuals. There was also variation in the number and length of run/rest cycles per night, and the average running rate. Correlation analyses demonstrated that in the quadriceps muscle, a low number of high distance run/rest cycles was the most consistent indicator for increased tissue damage. The amount of rest time between running bouts was a key factor associated with gastrocnemius damage. These data emphasize the need for detailed analysis of individual running performance, consideration of the length of wheel exposure time, and the selection of appropriate muscle groups for analysis, when applying the use of voluntary wheel running to disease exacerbation and/or pre-clinical testing of the efficacy of therapeutic agents in the mdx mouse.

Sex difference in top performers from Ironman to double deca iron ultra-triathlon

PubMed Central

Knechtle, Beat; Zingg, Matthias A; Rosemann, Thomas; Rüst, Christoph A

2014-01-01

This study investigated changes in performance and sex difference in top performers for ultra-triathlon races held between 1978 and 2013 from Ironman (3.8 km swim, 180 km cycle, and 42 km run) to double deca iron ultra-triathlon distance (76 km swim, 3,600 km cycle, and 844 km run). The fastest men ever were faster than the fastest women ever for split and overall race times, with the exception of the swimming split in the quintuple iron ultra-triathlon (19 km swim, 900 km cycle, and 210.1 km run). Correlation analyses showed an increase in sex difference with increasing length of race distance for swimming (r2=0.67, P=0.023), running (r2=0.77, P=0.009), and overall race time (r2=0.77, P=0.0087), but not for cycling (r2=0.26, P=0.23). For the annual top performers, split and overall race times decreased across years nonlinearly in female and male Ironman triathletes. For longer distances, cycling split times decreased linearly in male triple iron ultra-triathletes, and running split times decreased linearly in male double iron ultra-triathletes but increased linearly in female triple and quintuple iron ultra-triathletes. Overall race times increased nonlinearly in female triple and male quintuple iron ultra-triathletes. The sex difference decreased nonlinearly in swimming, running, and overall race time in Ironman triathletes but increased linearly in cycling and running and nonlinearly in overall race time in triple iron ultra-triathletes. These findings suggest that women reduced the sex difference nonlinearly in shorter ultra-triathlon distances (ie, Ironman), but for longer distances than the Ironman, the sex difference increased or remained unchanged across years. It seems very unlikely that female top performers will ever outrun male top performers in ultratriathlons. The nonlinear change in speed and sex difference in Ironman triathlon suggests that female and male Ironman triathletes have reached their limits in performance. PMID:25114605

Beauty and the beast: Some perspectives on efficient model analysis, surrogate models, and the future of modeling

NASA Astrophysics Data System (ADS)

Hill, M. C.; Jakeman, J.; Razavi, S.; Tolson, B.

2015-12-01

For many environmental systems model runtimes have remained very long as more capable computers have been used to add more processes and more time and space discretization. Scientists have also added more parameters and kinds of observations, and many model runs are needed to explore the models. Computational demand equals run time multiplied by number of model runs divided by parallelization opportunities. Model exploration is conducted using sensitivity analysis, optimization, and uncertainty quantification. Sensitivity analysis is used to reveal consequences of what may be very complex simulated relations, optimization is used to identify parameter values that fit the data best, or at least better, and uncertainty quantification is used to evaluate the precision of simulated results. The long execution times make such analyses a challenge. Methods for addressing this challenges include computationally frugal analysis of the demanding original model and a number of ingenious surrogate modeling methods. Both commonly use about 50-100 runs of the demanding original model. In this talk we consider the tradeoffs between (1) original model development decisions, (2) computationally frugal analysis of the original model, and (3) using many model runs of the fast surrogate model. Some questions of interest are as follows. If the added processes and discretization invested in (1) are compared with the restrictions and approximations in model analysis produced by long model execution times, is there a net benefit related of the goals of the model? Are there changes to the numerical methods that could reduce the computational demands while giving up less fidelity than is compromised by using computationally frugal methods or surrogate models for model analysis? Both the computationally frugal methods and surrogate models require that the solution of interest be a smooth function of the parameters or interest. How does the information obtained from the local methods typical of (2) and the global averaged methods typical of (3) compare for typical systems? The discussion will use examples of response of the Greenland glacier to global warming and surface and groundwater modeling.

Compression socks and functional recovery following marathon running: a randomized controlled trial.

PubMed

Armstrong, Stuart A; Till, Eloise S; Maloney, Stephen R; Harris, Gregory A

2015-02-01

Compression socks have become a popular recovery aid for distance running athletes. Although some physiological markers have been shown to be influenced by wearing these garments, scant evidence exists on their effects on functional recovery. This research aims to shed light onto whether the wearing of compression socks for 48 hours after marathon running can improve functional recovery, as measured by a timed treadmill test to exhaustion 14 days following marathon running. Athletes (n = 33, age, 38.5 ± 7.2 years) participating in the 2012 Melbourne, 2013 Canberra, or 2013 Gold Coast marathons were recruited and randomized into the compression sock or placebo group. A graded treadmill test to exhaustion was performed 2 weeks before and 2 weeks after each marathon. Time to exhaustion, average and maximum heart rates were recorded. Participants were asked to wear their socks for 48 hours immediately after completion of the marathon. The change in treadmill times (seconds) was recorded for each participant. Thirty-three participants completed the treadmill protocols. In the compression group, average treadmill run to exhaustion time 2 weeks after the marathon increased by 2.6% (52 ± 103 seconds). In the placebo group, run to exhaustion time decreased by 3.4% (-62 ± 130 seconds), P = 0.009. This shows a significant beneficial effect of compression socks on recovery compared with placebo. The wearing of below-knee compression socks for 48 hours after marathon running has been shown to improve functional recovery as measured by a graduated treadmill test to exhaustion 2 weeks after the event.

Multiple Off-Ice Performance Variables Predict On-Ice Skating Performance in Male and Female Division III Ice Hockey Players.

PubMed

Janot, Jeffrey M; Beltz, Nicholas M; Dalleck, Lance D

2015-09-01

The purpose of this study was to determine if off-ice performance variables could predict on-ice skating performance in Division III collegiate hockey players. Both men (n = 15) and women (n = 11) hockey players (age = 20.5 ± 1.4 years) participated in the study. The skating tests were agility cornering S-turn, 6.10 m acceleration, 44.80 m speed, modified repeat skate, and 15.20 m full speed. Off-ice variables assessed were years of playing experience, height, weight and percent body fat and off-ice performance variables included vertical jump (VJ), 40-yd dash (36.58m), 1-RM squat, pro-agility, Wingate peak power and peak power percentage drop (% drop), and 1.5 mile (2.4km) run. Results indicated that 40-yd dash (36.58m), VJ, 1.5 mile (2.4km) run, and % drop were significant predictors of skating performance for repeat skate (slowest, fastest, and average time) and 44.80 m speed time, respectively. Four predictive equations were derived from multiple regression analyses: 1) slowest repeat skate time = 2.362 + (1.68 x 40-yd dash time) + (0.005 x 1.5 mile run), 2) fastest repeat skate time = 9.762 - (0.089 x VJ) - (0.998 x 40-yd dash time), 3) average repeat skate time = 7.770 + (1.041 x 40-yd dash time) - (0.63 x VJ) + (0.003 x 1.5 mile time), and 4) 47.85 m speed test = 7.707 - (0.050 x VJ) - (0.01 x % drop). It was concluded that selected off-ice tests could be used to predict on-ice performance regarding speed and recovery ability in Division III male and female hockey players. Key pointsThe 40-yd dash (36.58m) and vertical jump tests are significant predictors of on-ice skating performance specific to speed.In addition to 40-yd dash and vertical jump, the 1.5 mile (2.4km) run for time and percent power drop from the Wingate anaerobic power test were also significant predictors of skating performance that incorporates the aspect of recovery from skating activity.Due to the specificity of selected off-ice variables as predictors of on-ice performance, coaches can elect to assess player performance off-ice and focus on other uses of valuable ice time for their individual teams.

Self-Reported Minimalist Running Injury Incidence and Severity: A Pilot Study.

PubMed

Ostermann, Katrina; Ridpath, Lance; Hanna, Jandy B

2016-08-01

Minimalist running entails using shoes with a flexible thin sole and is popular in the United States. Existing literature disagrees over whether minimalist running shoes (MRS) improve perceived severity of injuries associated with running in traditional running shoes (TRS). Additionally, the perceived injury patterns associated with MRS are relatively unknown. To examine whether injury incidence and severity (ie, degree of pain) by body region change after switching to MRS, and to determine if transition times affect injury incidences or severity with MRS. Runners who were either current or previous users of MRS were recruited to complete an Internet-based survey regarding self-reported injury before switching to MRS and whether self-reported pain from that injury decreased after switching. Questions regarding whether new injuries developed in respondents after switching to MRS were also included. Analyses were calculated using t tests, Wilcoxon signed rank tests, and Fischer exact tests. Forty-seven runners completed the survey, and 16 respondents reported injuries before switching to MRS. Among these respondents, pain resulting from injuries of the feet (P=.03) and knees (P=.01) decreased. Eighteen respondents (38.3%) indicated they sustained new injuries after switching to MRS, but the severity of these did not differ significantly from no injury. Neither time allowed for transition to MRS nor use or disuse of a stretching routine during this period was correlated with an increase in the incidence or severity of injuries. After switching to MRS, respondents perceived an improvement in foot and knee injuries. Additionally, respondents using MRS reported an injury rate of 38.3%, compared with the approximately 64% that the literature reports among TRS users. Future studies should be expanded to determine the full extent of the differences in injury patterns between MRS and TRS.

NASA AVOSS Fast-Time Wake Prediction Models: User's Guide

NASA Technical Reports Server (NTRS)

Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew

2014-01-01

The National Aeronautics and Space Administration (NASA) is developing and testing fast-time wake transport and decay models to safely enhance the capacity of the National Airspace System (NAS). The fast-time wake models are empirical algorithms used for real-time predictions of wake transport and decay based on aircraft parameters and ambient weather conditions. The aircraft dependent parameters include the initial vortex descent velocity and the vortex pair separation distance. The atmospheric initial conditions include vertical profiles of temperature or potential temperature, eddy dissipation rate, and crosswind. The current distribution includes the latest versions of the APA (3.4) and the TDP (2.1) models. This User's Guide provides detailed information on the model inputs, file formats, and the model output. An example of a model run and a brief description of the Memphis 1995 Wake Vortex Dataset is also provided.

Evaluation of the coupled COSMO-CLM+NEMO-Nordic model with focus on North and Baltic seas

NASA Astrophysics Data System (ADS)

Lenhardt, J.; Pham, T. V.; Früh, B.; Brauch, J.

2017-12-01

The region east of the Baltic Sea has been identified as a hot-spot of climate change by Giorgi, 2006, on the base of temperature and precipitation variability. For this purpose, the atmosphere model COSMO-CLM has been coupled to the ocean model NEMO, including the sea ice model LIM3, via the OASIS3-MCT coupler (Pham et al., 2014). The coupler interpolates heat, fresh water, momentum fluxes, sea level pressure and the fraction of sea ice at the interface in space and time. Our aim is to find an optimal configuration of the already existing coupled regional atmospheric-ocean model COSMO-CLM+NEMO-Nordic. So far results for the North- and Baltic seas show that the coupled run has large biases compared with the E-OBS reference data. Therefore, additional simulation evaluations are planned by the use of independent satellite observation data (e.g. Copernicus, EURO4M). We have performed a series of runs with the coupled COSMO-CLM+NEMO-Nordic model to find out about differences of model outputs due to different coupling time steps. First analyses of COSMO-CLM 2m temperatures let presume that different coupling time steps have an impact on the results of the coupled model run. Additional tests over a longer period of time are conducted to understand whether the signal-to-noise ratio could influence the bias. The results will be presented in our poster.

Development and implementation of a pharmacist-run comprehensive medication review program in Wisconsin.

PubMed

Schoenrock, Danielle L; Hartkopf, Katherine; Boeckelman, Carrie

2016-12-01

The development and implementation of a centralized, pharmacist-run population health program were pursued within a health system to increase patient exposure to comprehensive medication reviews (CMRs) and improve visit processes. Program implementation included choosing appropriate pilot pharmacy locations, developing a feasible staffing model, standardizing the workflow, and creating a patient referral process. The impact on patient exposure, specific interventions, and the sustainability of the program were evaluated over a seven-month period. A total of 96 CMRs were scheduled during the data collection period. Attendance at scheduled CMRs was 54% (52 visits); there were 25 cancellations (26%) and 19 no-shows (20%). Since program implementation, there has been more than a twofold increase (2.08) in the number of CMRs completed within the health system. On average, all aspects of each patient visit took 1.78 hours to complete. Pharmacists spent 28% of scheduled time on CMR tasks and 72% of time on telephone calls and technical tasks to maintain appointments. A pharmacist-run CMR program helped to elevate the role of the community pharmacist in a health system and to improve patient exposure to CMRs. Sustaining a centralized CMR program requires support from other members of the health-system team so that pharmacists can spend more time providing patient care and less time on the technical tasks involved. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Development and testing of a new system for assessing wheel-running behaviour in rodents.

PubMed

Chomiak, Taylor; Block, Edward W; Brown, Andrew R; Teskey, G Campbell; Hu, Bin

2016-05-05

Wheel running is one of the most widely studied behaviours in laboratory rodents. As a result, improved approaches for the objective monitoring and gathering of more detailed information is increasingly becoming important for evaluating rodent wheel-running behaviour. Here our aim was to develop a new quantitative wheel-running system that can be used for most typical wheel-running experimental protocols. Here we devise a system that can provide a continuous waveform amenable to real-time integration with a high-speed video ideal for wheel-running experimental protocols. While quantification of wheel running behaviour has typically focused on the number of revolutions per unit time as an end point measure, the approach described here allows for more detailed information like wheel rotation fluidity, directionality, instantaneous velocity, and acceleration, in addition to total number of rotations, and the temporal pattern of wheel-running behaviour to be derived from a single trace. We further tested this system with a running-wheel behavioural paradigm that can be used for investigating the neuronal mechanisms of procedural learning and postural stability, and discuss other potentially useful applications. This system and its ability to evaluate multiple wheel-running parameters may become a useful tool for screening new potentially important therapeutic compounds related to many neurological conditions.

Updates to watershed modeling in the Potholes Reservoir basin, Washington-a supplement to Scientific Investigation Report 2009-5081

USGS Publications Warehouse

Mastin, Mark

2012-01-01

A previous collaborative effort between the U.S. Geological Survey and the Bureau of Reclamation resulted in a watershed model for four watersheds that discharge into Potholes Reservoir, Washington. Since the model was constructed, two new meteorological sites have been established that provide more reliable real-time information. The Bureau of Reclamation was interested in incorporating this new information into the existing watershed model developed in 2009, and adding measured snowpack information to update simulated results and to improve forecasts of runoff. This report includes descriptions of procedures to aid a user in making model runs, including a description of the Object User Interface for the watershed model with details on specific keystrokes to generate model runs for the contributing basins. A new real-time, data-gathering computer program automates the creation of the model input files and includes the new meteorological sites. The 2009 watershed model was updated with the new sites and validated by comparing simulated results to measured data. As in the previous study, the updated model (2012 model) does a poor job of simulating individual storms, but a reasonably good job of simulating seasonal runoff volumes. At three streamflow-gaging stations, the January 1 to June 30 retrospective forecasts of runoff volume for years 2010 and 2011 were within 40 percent of the measured runoff volume for five of the six comparisons, ranging from -39.4 to 60.3 percent difference. A procedure for collecting measured snowpack data and using the data in the watershed model for forecast model runs, based on the Ensemble Streamflow Prediction method, is described, with an example that uses 2004 snow-survey data.

Framework for architecture-independent run-time reconfigurable applications

NASA Astrophysics Data System (ADS)

Lehn, David I.; Hudson, Rhett D.; Athanas, Peter M.

2000-10-01

Configurable Computing Machines (CCMs) have emerged as a technology with the computational benefits of custom ASICs as well as the flexibility and reconfigurability of general-purpose microprocessors. Significant effort from the research community has focused on techniques to move this reconfigurability from a rapid application development tool to a run-time tool. This requires the ability to change the hardware design while the application is executing and is known as Run-Time Reconfiguration (RTR). Widespread acceptance of run-time reconfigurable custom computing depends upon the existence of high-level automated design tools. Such tools must reduce the designers effort to port applications between different platforms as the architecture, hardware, and software evolves. A Java implementation of a high-level application framework, called Janus, is presented here. In this environment, developers create Java classes that describe the structural behavior of an application. The framework allows hardware and software modules to be freely mixed and interchanged. A compilation phase of the development process analyzes the structure of the application and adapts it to the target platform. Janus is capable of structuring the run-time behavior of an application to take advantage of the memory and computational resources available.

The Web Based Monitoring Project at the CMS Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez-Perez, Juan Antonio; Badgett, William; Behrens, Ulf

The Compact Muon Solenoid is a large a complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To the end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graphical and tabular formats of interest to the experimenters,more » including data such as beam conditions, luminosity, trigger rates, detector conditions, and many others, allowing for flexibility on the user’s side. This paper describes the WBM system architecture and describes how the system has been used from the beginning of data taking until now (Run1 and Run 2).« less

The web based monitoring project at the CMS experiment

NASA Astrophysics Data System (ADS)

Lopez-Perez, Juan Antonio; Badgett, William; Behrens, Ulf; Chakaberia, Irakli; Jo, Youngkwon; Maeshima, Kaori; Maruyama, Sho; Patrick, James; Rapsevicius, Valdas; Soha, Aron; Stankevicius, Mantas; Sulmanas, Balys; Toda, Sachiko; Wan, Zongru

2017-10-01

The Compact Muon Solenoid is a large a complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To that end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graphical and tabular formats of interest to the experimenters, including data such as beam conditions, luminosity, trigger rates, detector conditions, and many others, allowing for flexibility on the user’s side. This paper describes the WBM system architecture and describes how the system has been used from the beginning of data taking until now (Run1 and Run 2).

Solving Equations of Multibody Dynamics

NASA Technical Reports Server (NTRS)

Jain, Abhinandan; Lim, Christopher

2007-01-01

Darts++ is a computer program for solving the equations of motion of a multibody system or of a multibody model of a dynamic system. It is intended especially for use in dynamical simulations performed in designing and analyzing, and developing software for the control of, complex mechanical systems. Darts++ is based on the Spatial-Operator- Algebra formulation for multibody dynamics. This software reads a description of a multibody system from a model data file, then constructs and implements an efficient algorithm that solves the dynamical equations of the system. The efficiency and, hence, the computational speed is sufficient to make Darts++ suitable for use in realtime closed-loop simulations. Darts++ features an object-oriented software architecture that enables reconfiguration of system topology at run time; in contrast, in related prior software, system topology is fixed during initialization. Darts++ provides an interface to scripting languages, including Tcl and Python, that enable the user to configure and interact with simulation objects at run time.

Payload Operations

NASA Technical Reports Server (NTRS)

Cissom, R. D.; Melton, T. L.; Schneider, M. P.; Lapenta, C. C.

1999-01-01

The objective of this paper is to provide the future ISS scientist and/or engineer a sense of what ISS payload operations are expected to be. This paper uses a real-time operations scenario to convey this message. The real-time operations scenario begins at the initiation of payload operations and runs through post run experiment analysis. In developing this scenario, it is assumed that the ISS payload operations flight and ground capabilities are fully available for use by the payload user community. Emphasis is placed on telescience operations whose main objective is to enable researchers to utilize experiment hardware onboard the International Space Station as if it were located in their terrestrial laboratory. An overview of the Payload Operations Integration Center (POIC) systems and user ground system options is included to provide an understanding of the systems and interfaces users will utilize to perform payload operations. Detailed information regarding POIC capabilities can be found in the POIC Capabilities Document, SSP 50304.

The Trick Simulation Toolkit: A NASA/Opensource Framework for Running Time Based Physics Models

NASA Technical Reports Server (NTRS)

Penn, John M.

2016-01-01

The Trick Simulation Toolkit is a simulation development environment used to create high fidelity training and engineering simulations at the NASA Johnson Space Center and many other NASA facilities. Its purpose is to generate a simulation executable from a collection of user-supplied models and a simulation definition file. For each Trick-based simulation, Trick automatically provides job scheduling, numerical integration, the ability to write and restore human readable checkpoints, data recording, interactive variable manipulation, a run-time interpreter, and many other commonly needed capabilities. This allows simulation developers to concentrate on their domain expertise and the algorithms and equations of their models. Also included in Trick are tools for plotting recorded data and various other supporting utilities and libraries. Trick is written in C/C++ and Java and supports both Linux and MacOSX computer operating systems. This paper describes Trick's design and use at NASA Johnson Space Center.

Adaptive DIT-Based Fringe Tracking and Prediction at IOTA

NASA Technical Reports Server (NTRS)

Wilson, Edward; Pedretti, Ettore; Bregman, Jesse; Mah, Robert W.; Traub, Wesley A.

2004-01-01

An automatic fringe tracking system has been developed and implemented at the Infrared Optical Telescope Array (IOTA). In testing during May 2002, the system successfully minimized the optical path differences (OPDs) for all three baselines at IOTA. Based on sliding window discrete Fourier transform (DFT) calculations that were optimized for computational efficiency and robustness to atmospheric disturbances, the algorithm has also been tested extensively on off-line data. Implemented in ANSI C on the 266 MHZ PowerPC processor running the VxWorks real-time operating system, the algorithm runs in approximately 2.0 milliseconds per scan (including all three interferograms), using the science camera and piezo scanners to measure and correct the OPDs. Preliminary analysis on an extension of this algorithm indicates a potential for predictive tracking, although at present, real-time implementation of this extension would require significantly more computational capacity.

29 CFR 4003.4 - Extension of time.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL RULES FOR ADMINISTRATIVE REVIEW... an extension shall stop the running of the prescribed period of time. When a request for an extension... writing, and the prescribed period of time shall resume running from the date of denial. (b) Disaster...

Transport of plutonium in snowmelt run-off

DOE Office of Scientific and Technical Information (OSTI.GOV)

Purtymun, W.D.; Peters, R.; Maes, M.N.

1990-07-01

Plutonium in treated low-level radioactive effluents released into intermittent streams is bound by ion exchange or adsorption to bed sediments in the stream channel. These sediments are subject to transport with summer and spring snowmelt run-off. A study was made of the transport of plutonium during seven spring run-off events in Los Alamos and Pueblo canyons from the Laboratory boundary to Otowi on the Rio Grande. The melting of the snowpack during these years resulted in run-off that was large enough to reach the eastern edge of the Laboratory. Of these seven run-off events recorded at the Laboratory boundary, onlymore » five had sufficient flow to reach the Rio Grande. The volume of the five events that reached the river ranged from 5 {times} 10{sup 3} m{sup 3} to 104 {times} 10{sup 3} m{sup 3}. The five run-off events carried 119 {times} 10{sup 3} kg of suspended sediments and 1073 {times} 10{sup 3} kg of bed sediments, and transported 598 {mu}Ci of plutonium to the river. Of the 598 {mu}Ci of plutonium, 3% was transported in solution, 57% with suspended sediments, and 40% with bed sediments. 13 refs., 3 figs., 6 tabs.« less

Physiological characteristics of elite short- and long-distance triathletes.

PubMed

Millet, Grégoire P; Dréano, Patrick; Bentley, David J

2003-01-01

The purpose of this study was to compare the physiological responses in cycling and running of elite short-distance (ShD) and long-distance (LD) triathletes. Fifteen elite male triathletes participating in the World Championships were divided into two groups (ShD and LD) and performed a laboratory trial that comprised submaximal treadmill running, maximal then submaximal ergometry cycling and then an additional submaximal run. "In situ" best ShD triathlon performances were also analysed for each athlete. ShD demonstrated a significantly faster swim time than LD whereas .VO(2max) (ml kg(-1) min(-1)), cycling economy (W l(-1) min(-1)), peak power output (.W(peak),W) and ventilatory threshold (%.VO(2max)) were all similar between ShD and LD. Moreover, there were no differences between the two groups in the change (%) in running economy from the first to the second running bout. Swimming time was correlated to .W(peak)(r=-0.76; P<0.05) and economy ( r=-0.89; P<0.01) in the ShD athletes. Also, cycling time in the triathlon was correlated to .W(peak)(r=-0.83; P<0.05) in LD. In conclusion, ShD triathletes had a faster swimming time but did not exhibit different maximal or submaximal physiological characteristics measured in cycling and running than LD triathletes.

Comparisons of spawning areas and times for two runs of chinook salmon (Oncorhynchus tshawytscha) in the Kenai River, Alaska

USGS Publications Warehouse

Burger, C.V.; Wilmot, R.L.; Wangaard, D.B.

1985-01-01

From 1979 to 1982,188 chinook salmon (Oncorhynchus tshawytscha) were tagged with radio transmitters to locate spawning areas in the glacial Kenai River, southcentral Alaska. Results confirmed that an early run entered the river in May and June and spawned in tributaries, and a late run entered the river from late June through August and spawned in the main stem. Spawning peaked during August in tributaries influenced by lakes, but during July in other tributaries. Lakes may have increased fall and winter temperatures of downstream waters, enabling successful reproduction for later spawning fish within these tributaries. This hypothesis assumes that hatching and emergence can be completed in a shorter time in lake-influenced waters. The time of upstream migration and spawning (mid- to late August) of the late run is unique among chinook stocks in Cook Inlet. This behavior may have developed only because two large lakes (Kenai and Skilak) directly influence the main-stem Kenai River. If run timing is genetically controlled, and if the various components of the two runs are isolated stocks that have adapted to predictable stream temperatures, there are implications for stock transplantation programs and for any activities of man that alter stream temperatures.

Setting Time Limits on Tests

ERIC Educational Resources Information Center

van der Linden, Wim J.

2011-01-01

It is shown how the time limit on a test can be set to control the probability of a test taker running out of time before completing it. The probability is derived from the item parameters in the lognormal model for response times. Examples of curves representing the probability of running out of time on a test with given parameters as a function…

Study of the Effect of Temporal Sampling Frequency on DSCOVR Observations Using the GEOS-5 Nature Run Results. Part II; Cloud Coverage

NASA Technical Reports Server (NTRS)

Holdaway, Daniel; Yang, Yuekui

2016-01-01

This is the second part of a study on how temporal sampling frequency affects satellite retrievals in support of the Deep Space Climate Observatory (DSCOVR) mission. Continuing from Part 1, which looked at Earth's radiation budget, this paper presents the effect of sampling frequency on DSCOVR-derived cloud fraction. The output from NASA's Goddard Earth Observing System version 5 (GEOS-5) Nature Run is used as the "truth". The effect of temporal resolution on potential DSCOVR observations is assessed by subsampling the full Nature Run data. A set of metrics, including uncertainty and absolute error in the subsampled time series, correlation between the original and the subsamples, and Fourier analysis have been used for this study. Results show that, for a given sampling frequency, the uncertainties in the annual mean cloud fraction of the sunlit half of the Earth are larger over land than over ocean. Analysis of correlation coefficients between the subsamples and the original time series demonstrates that even though sampling at certain longer time intervals may not increase the uncertainty in the mean, the subsampled time series is further and further away from the "truth" as the sampling interval becomes larger and larger. Fourier analysis shows that the simulated DSCOVR cloud fraction has underlying periodical features at certain time intervals, such as 8, 12, and 24 h. If the data is subsampled at these frequencies, the uncertainties in the mean cloud fraction are higher. These results provide helpful insights for the DSCOVR temporal sampling strategy.

DN1(p) circadian neurons coordinate acute light and PDF inputs to produce robust daily behavior in Drosophila.

PubMed

Zhang, Luoying; Chung, Brian Y; Lear, Bridget C; Kilman, Valerie L; Liu, Yixiao; Mahesh, Guruswamy; Meissner, Rose-Anne; Hardin, Paul E; Allada, Ravi

2010-04-13

Daily behaviors in animals are determined by the interplay between internal timing signals from circadian clocks and environmental stimuli such as light. How these signals are integrated to produce timely and adaptive behavior is unclear. The fruit fly Drosophila exhibits clock-driven activity increases that anticipate dawn and dusk and free-running rhythms under constant conditions. Flies also respond to the onset of light and dark with acute increases in activity. Mutants of a novel ion channel, narrow abdomen (na), lack a robust increase in activity in response to light and show reduced anticipatory behavior and free-running rhythms, providing a genetic link between photic responses and circadian clock function. We used tissue-specific rescue of na to demonstrate a role for approximately 16-20 circadian pacemaker neurons, a subset of the posterior dorsal neurons 1 (DN1(p)s), in mediating the acute response to the onset of light as well as morning anticipatory behavior. Circadian pacemaker neurons expressing the neuropeptide PIGMENT-DISPERSING FACTOR (PDF) are especially important for morning anticipation and free-running rhythms and send projections to the DN1(p)s. We also demonstrate that DN1(p)Pdfr expression is sufficient to rescue, at least partially, Pdfr morning anticipation defects as well as defects in free-running rhythms, including those in DN1 molecular clocks. Additionally, these DN1 clocks in wild-type flies are more strongly reset to timing changes in PDF clocks than other pacemaker neurons, suggesting that they are direct targets. Taking these results together, we demonstrate that the DN1(p)s lie at the nexus of PDF and photic signaling to produce appropriate daily behavior.

Running Technique is an Important Component of Running Economy and Performance

PubMed Central

FOLLAND, JONATHAN P.; ALLEN, SAM J.; BLACK, MATTHEW I.; HANDSAKER, JOSEPH C.; FORRESTER, STEPHANIE E.

2017-01-01

ABSTRACT Despite an intuitive relationship between technique and both running economy (RE) and performance, and the diverse techniques used by runners to achieve forward locomotion, the objective importance of overall technique and the key components therein remain to be elucidated. Purpose This study aimed to determine the relationship between individual and combined kinematic measures of technique with both RE and performance. Methods Ninety-seven endurance runners (47 females) of diverse competitive standards performed a discontinuous protocol of incremental treadmill running (4-min stages, 1-km·h−1 increments). Measurements included three-dimensional full-body kinematics, respiratory gases to determine energy cost, and velocity of lactate turn point. Five categories of kinematic measures (vertical oscillation, braking, posture, stride parameters, and lower limb angles) and locomotory energy cost (LEc) were averaged across 10–12 km·h−1 (the highest common velocity < velocity of lactate turn point). Performance was measured as season's best (SB) time converted to a sex-specific z-score. Results Numerous kinematic variables were correlated with RE and performance (LEc, 19 variables; SB time, 11 variables). Regression analysis found three variables (pelvis vertical oscillation during ground contact normalized to height, minimum knee joint angle during ground contact, and minimum horizontal pelvis velocity) explained 39% of LEc variability. In addition, four variables (minimum horizontal pelvis velocity, shank touchdown angle, duty factor, and trunk forward lean) combined to explain 31% of the variability in performance (SB time). Conclusions This study provides novel and robust evidence that technique explains a substantial proportion of the variance in RE and performance. We recommend that runners and coaches are attentive to specific aspects of stride parameters and lower limb angles in part to optimize pelvis movement, and ultimately enhance performance. PMID:28263283

Biomechanics of Distance Running.

ERIC Educational Resources Information Center

Cavanagh, Peter R., Ed.

Contributions from researchers in the field of running mechanics are included in the 13 chapters of this book. The following topics are covered: (1) "The Mechanics of Distance Running: A Historical Perspective" (Peter Cavanagh); (2) "Stride Length in Distance Running: Velocity, Body Dimensions, and Added Mass Effects" (Peter Cavanagh, Rodger…

Contrasting Indian Ocean SST Variability With and Without ENSO Influence: A Coupled Atmosphere-Ocean GCM Study

NASA Technical Reports Server (NTRS)

Yu, Jin-Yi; Lau, K. M.

2004-01-01

In this study, we perform experiments with a coupled atmosphere-ocean general circulation model (CGCM) to examine ENSO's influence on the interannual sea surface temperature (SST) variability of the tropical Indian Ocean. The control experiment includes both the Indian and Pacific Oceans in the ocean model component of the CGCM (the Indo-Pacific Run). The anomaly experiment excludes ENSOs influence by including only the Indian Ocean while prescribing monthly-varying climatological SSTs for the Pacific Ocean (the Indian-Ocean Run). In the Indo-Pacific Run, an oscillatory mode of the Indian Ocean SST variability is identified by a multi-channel singular spectral analysis (MSSA). The oscillatory mode comprises two patterns that can be identified with the Indian Ocean Zonal Mode (IOZM) and a basin-wide warming/cooling mode respectively. In the model, the IOZM peaks about 3-5 months after ENSO reaches its maximum intensity. The basin mode peaks 8 months after the IOZM. The timing and associated SST patterns suggests that the IOZM is related to ENSO, and the basin- wide warming/cooling develops as a result of the decay of the IOZM spreading SST anomalies from western Indian Ocean to the eastern Indian Ocean. In contrast, in the Indian-Ocean Run, no oscillatory modes can be identified by the MSSA, even though the Indian Ocean SST variability is characterized by east-west SST contrast patterns similar to the IOZM. In both control and anomaly runs, IOZM-like SST variability appears to be associated with forcings from fluctuations of the Indian monsoon. Our modeling results suggest that the oscillatory feature of the IOZM is primarily forced by ENSO.

Solar Ultraviolet Radiation Exposure of South African Marathon Runners During Competition Marathon Runs and Training Sessions: A Feasibility Study.

PubMed

Nurse, Victoria; Wright, Caradee Y; Allen, Martin; McKenzie, Richard L

2015-01-01

Marathon runners spend considerable time in outdoor training for and participating in marathons. Outdoor runners may experience high solar ultraviolet radiation (UVR) exposure. South Africa, where running is popular, experiences high ambient solar UVR levels that may be associated with adverse health effects. This feasibility study explores the use of personal dosimeters to determine solar UVR exposure patterns and possible related acute health risks of four marathon runners during marathons and training sessions in Cape Town and Pretoria. Runners running marathons that started early in the day, and that did not exceed 4 hours, yielded low total solar UVR exposure doses (mean 0.093 SED per exposure period run, median 0.088 SED, range 0.062-0.136 SED; average of 16.54% of ambient solar UVR). Training sessions run during early morning and late afternoon presented similar results. Several challenges hindered analysis including accounting for anatomical position of personal dosimeter and natural shade. To assess health risks, hazard quotients (HQs) were calculated using a hypothetical runner's schedule. Cumulative, annual solar UVR exposure-calculated acute health risks were low (HQ = 0.024) for training sessions and moderate (HQ = 4.922) for marathon runs. While these data and calculations are based on 18 person-days, one can measure marathon runners' personal solar UVR exposure although several challenges must be overcome. © 2015 The American Society of Photobiology.

Run-Curve Design for Energy Saving Operation in a Modern DC-Electrification

NASA Astrophysics Data System (ADS)

Koseki, Takafumi; Noda, Takashi

Mechanical brakes are often used by electric trains. These brakes have a few problems like response speed, coefficient of friction, maintenance cost and so on. As a result, methods for actively using regenerative brakes are required. In this paper, we propose the useful pure electric braking, which would involve ordinary brakes by only regenerative brakes without any mechanical brakes at high speed. Benefits of our proposal include a DC-electrification system with regenerative substations that can return powers to the commercial power system and a train that can use the full regenerative braking force. We furthermore evaluate the effects on running time and energies saved by regenerative substations in the proposed method.

Hercules Aerospace flywheel test results

NASA Astrophysics Data System (ADS)

Steele, R. S., Jr.; Babelay, E. F., Jr.; Sutton, B. J.

1981-06-01

The detailed results of the spin test evaluation of the Hercules Aerospace flywheel at the Oak Ridge Flywheel Evaluation Laboratory (ORFEL) are presented. Details of the static evaluation with radiography and measures of weight, inertia and natural frequencies are included. The flywheel was spun four times with the maximum speed being increased with each run. During the final run, the flywheel achieved 372 rps and stored 0.714 kWhr of kinetic energy at 37 Whr/kg. The ultimate speed was limited by a composite transverse strength that was somewhat lower than that used in the design of the flywheel. This resulted in internal cracking of the flywheel and, eventually, the loss of material from the outer circumference.

Internal Quality Control Practices in Coagulation Laboratories: recommendations based on a patterns-of-practice survey.

PubMed

McFarlane, A; Aslan, B; Raby, A; Moffat, K A; Selby, R; Padmore, R

2015-12-01

Internal quality control (IQC) procedures are crucial for ensuring accurate patient test results. The IQMH Centre for Proficiency Testing conducted a web-based survey to gather information on the current IQC practices in coagulation testing. A questionnaire was distributed to 174 Ontario laboratories licensed to perform prothrombin time (PT) and activated partial thromboplastin time (APTT). All laboratories reported using two levels of commercial QC (CQC); 12% incorporate pooled patient plasma into their IQC program; >68% run CQC at the beginning of each shift; 56% following maintenance, with reagent changes, during a shift, or with every repeat sample; 6% only run CQC at the beginning of the day and 25% when the instruments have been idle for a defined period of time. IQC run frequency was determined by manufacturer recommendations (71%) but also influenced by the stability of test (27%), clinical impact of an incorrect test result (25%), and sample's batch number (10%). IQC was monitored using preset limits based on standard deviation (66%), precision goals (46%), or allowable performance limits (36%). 95% use multirules. Failure actions include repeating the IQC (90%) and reporting patient results; if repeat passes, 42% perform repeat analysis of all patient samples from last acceptable IQC. Variability exists in coagulation IQC practices among Ontario clinical laboratories. The recommendations presented here would be useful in encouraging standardized IQC practices. © 2015 John Wiley & Sons Ltd.

The Effect of Driver Rise-Time on Pinch Current and its Impact on Plasma Focus Performance and Neutron Yield

NASA Astrophysics Data System (ADS)

Sears, Jason; Schmidt, Andrea; Link, Anthony; Welch, Dale

2016-10-01

Experiments have suggested that dense plasma focus (DPF) neutron yield increases with faster drivers [Decker NIMP 1986]. Using the particle-in-cell code LSP [Schmidt PRL 2012], we reproduce this trend in a kJ DPF [Ellsworth 2014], and demonstrate how driver rise time is coupled to neutron output. We implement a 2-D model of the plasma focus including self-consistent circuit-driven boundary conditions. Driver capacitance and voltage are varied to modify the current rise time, and anode length is adjusted so that run-in coincides with the peak current. We observe during run down that magnetohydrodynamic (MHD) instabilities of the sheath shed blobs of plasma that remain in the inter-electrode gap during run in. This trailing plasma later acts as a low-inductance restrike path that shunts current from the pinch during maximum compression. While the MHD growth rate increases slightly with driver speed, the shorter anode of the fast driver allows fewer e-foldings and hence reduces the trailing mass between electrodes. As a result, the fast driver postpones parasitic restrikes and maintains peak current through the pinch during maximum compression. The fast driver pinch therefore achieves best simultaneity between its ion beam and peak target density, which maximizes neutron production. Prepared by LLNL under Contract DE-AC52-07NA27344.

Effect of Compression Garments on Physiological Responses After Uphill Running.

PubMed

Struhár, Ivan; Kumstát, Michal; Králová, Dagmar Moc

2018-03-01

Limited practical recommendations related to wearing compression garments for athletes can be drawn from the literature at the present time. We aimed to identify the effects of compression garments on physiological and perceptual measures of performance and recovery after uphill running with different pressure and distributions of applied compression. In a random, double blinded study, 10 trained male runners undertook three 8 km treadmill runs at a 6% elevation rate, with the intensity of 75% VO2max while wearing low, medium grade compression garments and high reverse grade compression. In all the trials, compression garments were worn during 4 hours post run. Creatine kinase, measurements of muscle soreness, ankle strength of plantar/dorsal flexors and mean performance time were then measured. The best mean performance time was observed in the medium grade compression garments with the time difference being: medium grade compression garments vs. high reverse grade compression garments. A positive trend in increasing peak torque of plantar flexion (60º·s-1, 120º·s-1) was found in the medium grade compression garments: a difference between 24 and 48 hours post run. The highest pain tolerance shift in the gastrocnemius muscle was the medium grade compression garments, 24 hour post run, with the shift being +11.37% for the lateral head and 6.63% for the medial head. In conclusion, a beneficial trend in the promotion of running performance and decreasing muscle soreness within 24 hour post exercise was apparent in medium grade compression garments.

GO, an exec for running the programs: CELL, COLLIDER, MAGIC, PATRICIA, PETROS, TRANSPORT, and TURTLE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoaee, H.

1982-05-01

An exec has been written and placed on the PEP group's public disk to facilitate the use of several PEP related computer programs available on VM. The exec's program list currently includes: CELL, COLLIDER, MAGIC, PATRICIA, PETROS, TRANSPORT, and TURTLE. In addition, provisions have been made to allow addition of new programs to this list as they become available. The GO exec is directly callable from inside the Wylbur editor (in fact, currently this is the only way to use the GO exec.). It provides the option of running any of the above programs in either interactive or batch mode.more » In the batch mode, the GO exec sends the data in the Wylbur active file along with the information required to run the job to the batch monitor (BMON, a virtual machine that schedules and controls execution of batch jobs). This enables the user to proceed with other VM activities at his/her terminal while the job executes, thus making it of particular interest to the users with jobs requiring much CPU time to execute and/or those wishing to run multiple jobs independently. In the interactive mode, useful for small jobs requiring less CPU time, the job is executed by the user's own Virtual Machine using the data in the active file as input. At the termination of an interactive job, the GO exec facilitates examination of the output by placing it in the Wylbur active file.« less

GO, an exec for running the programs: CELL, COLLIDER, MAGIC, PATRICIA, PETROS, TRANSPORT and TURTLE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoaee, H.

1982-05-01

An exec has been written and placed on the PEP group's public disk (PUBRL 192) to facilitate the use of several PEP related computer programs available on VM. The exec's program list currently includes: CELL, COLLIDER, MAGIC, PATRICIA, PETROS, TRANSPORT, and TURTLE. In addition, provisions have been made to allow addition of new programs to this list as they become available. The GO exec is directly callable from inside the Wylbur editor (in fact, currently this is the only way to use the GO exec.) It provides the option of running any of the above programs in either interactive ormore » batch mode. In the batch mode, the GO exec sends the data in the Wylbur active file along with the information required to run the job to the batch monitor (BMON, a virtual machine that schedules and controls execution of batch jobs). This enables the user to proceed with other VM activities at his/her terminal while the job executes, thus making it of particular interest to the users with jobs requiring much CPU time to execute and/or those wishing to run multiple jobs independently. In the interactive mode, useful for small jobs requiring less CPU time, the job is executed by the user's own Virtual Machine using the data in the active file as input. At the termination of an interactive job, the GO exec facilitates examination of the output by placing it in the Wylbur active file.« less

Acute and Chronic Exercise in Animal Models.

PubMed

Thu, Vu Thi; Kim, Hyoung Kyu; Han, Jin

2017-01-01

Numerous animal cardiac exercise models using animal subjects have been established to uncover the cardiovascular physiological mechanism of exercise or to determine the effects of exercise on cardiovascular health and disease. In most cases, animal-based cardiovascular exercise modalities include treadmill running, swimming, and voluntary wheel running with a series of intensities, times, and durations. Those used animals include small rodents (e.g., mice and rats) and large animals (e.g., rabbits, dogs, goats, sheep, pigs, and horses). Depending on the research goal, each experimental protocol should also describe whether its respective exercise treatment can produce the anticipated acute or chronic cardiovascular adaptive response. In this chapter, we will briefly describe the most common kinds of animal models of acute and chronic cardiovascular exercises that are currently being conducted and are likely to be chosen in the near future. Strengths and weakness of animal-based cardiac exercise modalities are also discussed.

Running SW4 On New Commodity Technology Systems (CTS-1) Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodgers, Arthur J.; Petersson, N. Anders; Pitarka, Arben

We have recently been running earthquake ground motion simulations with SW4 on the new capacity computing systems, called the Commodity Technology Systems - 1 (CTS-1) at Lawrence Livermore National Laboratory (LLNL). SW4 is a fourth order time domain finite difference code developed by LLNL and distributed by the Computational Infrastructure for Geodynamics (CIG). SW4 simulates seismic wave propagation in complex three-dimensional Earth models including anelasticity and surface topography. We are modeling near-fault earthquake strong ground motions for the purposes of evaluating the response of engineered structures, such as nuclear power plants and other critical infrastructure. Engineering analysis of structures requiresmore » the inclusion of high frequencies which can cause damage, but are often difficult to include in simulations because of the need for large memory to model fine grid spacing on large domains.« less

Quantifying Uncertainty from Computational Factors in Simulations of a Model Ballistic System

DTIC Science & Technology

2017-08-01

Comparison of runs 6–9 with the corresponding simulations from the stop time study (Tables 22 and 23) show that the restart series produces...Disclaimers The findings in this report are not to be construed as an official Department of the Army position unless so designated by other authorized...0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing

75 FR 37311 - Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... maximum time interval between any engine run-ups from idle and the minimum ambient temperature associated with that run-up interval. This limitation is necessary because we do not currently have any specific requirements for run-up procedures for engine ground operation in icing conditions. The engine run-up procedure...

Measuring Students' Physical Activity Levels: Validating SOFIT for Use with High-School Students

ERIC Educational Resources Information Center

van der Mars, Hans; Rowe, Paul J.; Schuldheisz, Joel M.; Fox, Susan

2004-01-01

This study was conducted to validate the System for Observing Fitness Instruction Time (SOFIT) for measuring physical activity levels of high-school students. Thirty-five students (21 girls and 14 boys from grades 9-12) completed a standardized protocol including lying, sitting, standing, walking, running, curl-ups, and push-ups. Heart rates and…

System on a Chip Real-Time Emulation (SOCRE)

DTIC Science & Technology

2006-09-01

code ) i Table of Contents Preface...emulation platform included LDPC decoders, A/V and radio applications Port BEE flow to Emulation Platforms, SOC Technologies One of the key tasks of the...Once the design has been described within Simulink, the designer runs the BEE design flow within Matlab using the bee_xps interface. At this point

CARDIOVASCULAR MORTALITY IN PHOENIX: PM1 IS A BETTER INDICATOR THAN PM2.5.

EPA Science Inventory

EPA has obtained a 3-year database of particulate matter (PM) in Phoenix, AZ from 1995 - 1997 that includes elemental analysis by XRF of daily PM2.5. During this time period PM1 and PM2.5 TEOMs were run simultaneously for about 7 months during two periods of the year. Regressio...

My Time: A Self-Esteem Course for Adolescent Girls.

ERIC Educational Resources Information Center

Rea, Lorraine M.

Today's adolescents face an increasing number of serious problems including drugs, violence, divorce, and early pregnancy. Over one million youngsters run away from home each year seeking answers to their difficulties. Young women of this age need an opportunity to share their fears and worries with others and to gain information on ways to deal…

TIMESERIESSTREAMING.VI: LabVIEW program for reliable data streaming of large analog time series

NASA Astrophysics Data System (ADS)

Czerwinski, Fabian; Oddershede, Lene B.

2011-02-01

With modern data acquisition devices that work fast and very precise, scientists often face the task of dealing with huge amounts of data. These need to be rapidly processed and stored onto a hard disk. We present a LabVIEW program which reliably streams analog time series of MHz sampling. Its run time has virtually no limitation. We explicitly show how to use the program to extract time series from two experiments: For a photodiode detection system that tracks the position of an optically trapped particle and for a measurement of ionic current through a glass capillary. The program is easy to use and versatile as the input can be any type of analog signal. Also, the data streaming software is simple, highly reliable, and can be easily customized to include, e.g., real-time power spectral analysis and Allan variance noise quantification. Program summaryProgram title: TimeSeriesStreaming.VI Catalogue identifier: AEHT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 250 No. of bytes in distributed program, including test data, etc.: 63 259 Distribution format: tar.gz Programming language: LabVIEW ( http://www.ni.com/labview/) Computer: Any machine running LabVIEW 8.6 or higher Operating system: Windows XP and Windows 7 RAM: 60-360 Mbyte Classification: 3 Nature of problem: For numerous scientific and engineering applications, it is highly desirable to have an efficient, reliable, and flexible program to perform data streaming of time series sampled with high frequencies and possibly for long time intervals. This type of data acquisition often produces very large amounts of data not easily streamed onto a computer hard disk using standard methods. Solution method: This LabVIEW program is developed to directly stream any kind of time series onto a hard disk. Due to optimized timing and usage of computational resources, such as multicores and protocols for memory usage, this program provides extremely reliable data acquisition. In particular, the program is optimized to deal with large amounts of data, e.g., taken with high sampling frequencies and over long time intervals. The program can be easily customized for time series analyses. Restrictions: Only tested in Windows-operating LabVIEW environments, must use TDMS format, acquisition cards must be LabVIEW compatible, driver DAQmx installed. Running time: As desirable: microseconds to hours

History of Satellite Orbit Determination at NSWCDD

DTIC Science & Technology

2018-01-31

run . Segment 40 did pass editing and its use was optional after Segment 20. Segment 30 needed to be run before Segment 80. Segment 70 was run as...control cards required to run the program. These included a CHARGE card related to usage charges and various REQUEST, ATTACH, and CATALOG cards...each) could be done in a single run after the long-arc solution had converged. These short arcs used the pass matrices from the long-arc run in their

Time and Space Partitioning the EagleEye Reference Misson

NASA Astrophysics Data System (ADS)

Bos, Victor; Mendham, Peter; Kauppinen, Panu; Holsti, Niklas; Crespo, Alfons; Masmano, Miguel; de la Puente, Juan A.; Zamorano, Juan

2013-08-01

We discuss experiences gained by porting a Software Validation Facility (SVF) and a satellite Central Software (CSW) to a platform with support for Time and Space Partitioning (TSP). The SVF and CSW are part of the EagleEye Reference mission of the European Space Agency (ESA). As a reference mission, EagleEye is a perfect candidate to evaluate practical aspects of developing satellite CSW for and on TSP platforms. The specific TSP platform we used consists of a simulated LEON3 CPU controlled by the XtratuM separation micro-kernel. On top of this, we run five separate partitions. Each partition runs its own real-time operating system or Ada run-time kernel, which in turn are running the application software of the CSW. We describe issues related to partitioning; inter-partition communication; scheduling; I/O; and fault-detection, isolation, and recovery (FDIR).

76 FR 179 - General Motors Company, Formerly Known as General Motors Corporation, Willow Run Transmission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-03

..., Formerly Known as General Motors Corporation, Willow Run Transmission Plant, Including On-Site Leased... to workers of General Motors Company, formerly known as General Motors Corporation, Willow Run... location of General Motors Company, formerly known as General Motors Corporation, Willow Run Transmission...

75 FR 76038 - General Motors Company Formerly Known as General Motors Corporation Willow Run Transmission Plant...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Formerly Known as General Motors Corporation Willow Run Transmission Plant Including On-Site Leased Workers... Company, formerly known as General Motors Corporation, Willow Run Transmission Plant, Ypsilanti, Michigan... Motors Company, formerly known as General Motors Corporation, Willow Run Transmission Plant. The...

75 FR 49527 - General Motors Company Formerly Known as General Motors Corporation, Willow Run Transmission...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... Formerly Known as General Motors Corporation, Willow Run Transmission Plant Including On-Site Leased... Corporation, Willow Run Transmission Plant, Ypsilanti, Michigan. The notice was published in the Federal... Motors Corporation, Willow Run Transmission Plant. The Department has determined that these workers were...

Assessing the debris flow run-out frequency of a catchment in the French Alps using a parameterization analysis with the RAMMS numerical run-out model

NASA Astrophysics Data System (ADS)

Hussin, H. Y.; Luna, B. Quan; van Westen, C. J.; Christen, M.; Malet, J.-P.; van Asch, Th. W. J.

2012-04-01

Debris flows occurring in the European Alps frequently cause significant damage to settlements, power-lines and transportation infrastructure which has led to traffic disruptions, economic loss and even death. Estimating the debris flow run-out extent and the parameter uncertainty related to run-out modeling are some of the difficulties found in the Quantitative Risk Assessment (QRA) of debris flows. Also, the process of the entrainment of material into a debris flow is until now not completely understood. Debris flows observed in the French Alps entrain 5 - 50 times the amount of volume compared to the initially mobilized source volume. In this study we analyze a debris flow that occurred in 2003 at the Faucon catchment in the Barcelonnette Basin (Southern French Alps). The analysis was carried out using the Voellmy rheology and an entrainment model imbedded in the RAMMS 2D numerical modeling software. The historic event was back calibrated based on source, entrainment and deposit volumes, including the run-out distance, velocities and deposit heights of the debris flow. This was then followed by a sensitivity analysis of the rheological and entrainment parameters to produce 120 debris flow scenarios leading to a frequency assessment of the run-out distance and deposit height at the debris fan. The study shows that the Voellmy frictional parameters mainly influence the run-out distance and velocity of the flow, while the entrainment parameter has a major impact on the debris flow height. The frequency assessment of the 120 simulated scenarios further gives an indication on the most likely debris flow run-out extents and heights for this catchment. Such an assessment can be an important link between the rheological model parameters and the spatial probability of the run-out for the Quantitative Risk Assessment (QRA) of debris flows.

Lock Acquisition and Sensitivity Analysis of Advanced LIGO Interferometers

NASA Astrophysics Data System (ADS)

Martynov, Denis

Laser interferometer gravitational wave observatory (LIGO) consists of two complex large-scale laser interferometers designed for direct detection of gravitational waves from distant astrophysical sources in the frequency range 10Hz - 5kHz. Direct detection of space-time ripples will support Einstein's general theory of relativity and provide invaluable information and new insight into physics of the Universe. The initial phase of LIGO started in 2002, and since then data was collected during the six science runs. Instrument sensitivity improved from run to run due to the effort of commissioning team. Initial LIGO has reached designed sensitivity during the last science run, which ended in October 2010. In parallel with commissioning and data analysis with the initial detector, LIGO group worked on research and development of the next generation of detectors. Major instrument upgrade from initial to advanced LIGO started in 2010 and lasted until 2014. This thesis describes results of commissioning work done at the LIGO Livingston site from 2013 until 2015 in parallel with and after the installation of the instrument. This thesis also discusses new techniques and tools developed at the 40m prototype including adaptive filtering, estimation of quantization noise in digital filters and design of isolation kits for ground seismometers. The first part of this thesis is devoted to the description of methods for bringing the interferometer into linear regime when collection of data becomes possible. States of longitudinal and angular controls of interferometer degrees of freedom during lock acquisition process and in low noise configuration are discussed in details. Once interferometer is locked and transitioned to low noise regime, instrument produces astrophysics data that should be calibrated to units of meters or strain. The second part of this thesis describes online calibration technique set up in both observatories to monitor the quality of the collected data in real time. Sensitivity analysis was done to understand and eliminate noise sources of the instrument. The coupling of noise sources to gravitational wave channel can be reduced if robust feedforward and optimal feedback control loops are implemented. Static and adaptive feedforward noise cancellation techniques applied to Advanced LIGO interferometers and tested at the 40m prototype are described in the last part of this thesis. Applications of optimal time domain feedback control techniques and estimators to aLIGO control loops are also discussed. Commissioning work is still ongoing at the sites. First science run of advanced LIGO is planned for September 2015 and will last for 3-4 months. This run will be followed by a set of small instrument upgrades that will be installed on a time scale of few months. Second science run will start in spring 2016 and last for about six months. Since current sensitivity of advanced LIGO is already more than a factor of 3 higher compared to initial detectors and keeps improving on a monthly basis, the upcoming science runs have a good chance for the first direct detection of gravitational waves.

Improved performance of the LHCb Outer Tracker in LHC Run 2

NASA Astrophysics Data System (ADS)

d'Argent, P.; Dufour, L.; Grillo, L.; de Vries, J. A.; Ukleja, A.; Aaij, R.; Archilli, F.; Bachmann, S.; Berninghoff, D.; Birnkraut, A.; Blouw, J.; De Cian, M.; Ciezarek, G.; Färber, C.; Demmer, M.; Dettori, F.; Gersabeck, E.; Grabowski, J.; Hulsbergen, W. D.; Khanji, B.; Kolpin, M.; Kucharczyk, M.; Malecki, B. P.; Merk, M.; Mulder, M.; Müller, J.; Mueller, V.; Pellegrino, A.; Pikies, M.; Rachwal, B.; Schmelzer, T.; Spaan, B.; Szczekowski, M.; van Tilburg, J.; Tolk, S.; Tuning, N.; Uwer, U.; Wishahi, J.; Witek, M.

2017-11-01

The LHCb Outer Tracker is a gaseous detector covering an area of 5 × 6 m2 with 12 double layers of straw tubes. The performance of the detector is presented based on data of the LHC Run 2 running period from 2015 and 2016. Occupancies and operational experience for data collected in pp, pPb and PbPb collisions are described. An updated study of the ageing effects is presented showing no signs of gain deterioration or other radiation damage effects. In addition several improvements with respect to LHC Run 1 data taking are introduced. A novel real-time calibration of the time-alignment of the detector and the alignment of the single monolayers composing detector modules are presented, improving the drift-time and position resolution of the detector by 20%. Finally, a potential use of the improved resolution for the timing of charged tracks is described, showing the possibility to identify low-momentum hadrons with their time-of-flight.

OGS improvements in 2012 in running the Northeastern Italy Seismic Network: the Ferrara VBB borehole seismic station

NASA Astrophysics Data System (ADS)

Pesaresi, Damiano; Romanelli, Marco; Barnaba, Carla; Bragato, Pier Luigi; Durì, Giorgio

2013-04-01

The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the Northeastern Italy Seismic Network: it currently consists of 17 very sensitive broad band and 18 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of about 100 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of Northeastern Italy. The southwestern edge of the OGS seismic network stands on the Po alluvial basin: earthquake localization and characterization in this area is affected by the presence of soft alluvial deposits. OGS ha already experience in running a local seismic network in high noise conditions making use of borehole installations in the case of the micro-seismicity monitoring of a local gas storage site for a private company. Following the ML=5.9 earthquake that struck the Emilia region around Ferrara in Northern Italy on May 20, 2012 at 02:03:53 UTC, a cooperation of Istituto Nazionale di Geofisica e Vulcanologia, OGS, the Comune di Ferrara and the University of Ferrara lead to the reinstallation of a previously existing very broad band (VBB) borehole seismic station in Ferrara. The aim of the OGS intervention was on one hand to extend its real time seismic monitoring capabilities toward South-West, including Ferrara and its surroundings, and on the other hand to evaluate the seismic response at the site. We will describe improvements in running the Northeastern Italy Seismic Network, including details of the Ferrara VBB borehole station configuration and installation, with first results.

Comprehensive seismic monitoring of the Cascadia megathrust with real-time GPS

NASA Astrophysics Data System (ADS)

Melbourne, T. I.; Szeliga, W. M.; Santillan, V. M.; Scrivner, C. W.; Webb, F.

2013-12-01

We have developed a comprehensive real-time GPS-based seismic monitoring system for the Cascadia subduction zone based on 1- and 5-second point position estimates computed within the ITRF08 reference frame. A Kalman filter stream editor that uses a geometry-free combination of phase and range observables to speed convergence while also producing independent estimation of carrier phase biases and ionosphere delay pre-cleans raw satellite measurements. These are then analyzed with GIPSY-OASIS using satellite clock and orbit corrections streamed continuously from the International GNSS Service (IGS) and the German Aerospace Center (DLR). The resulting RMS position scatter is less than 3 cm, and typical latencies are under 2 seconds. Currently 31 coastal Washington, Oregon, and northern California stations from the combined PANGA and PBO networks are analyzed. We are now ramping up to include all of the remaining 400+ stations currently operating throughout the Cascadia subduction zone, all of which are high-rate and telemetered in real-time to CWU. These receivers span the M9 megathrust, M7 crustal faults beneath population centers, several active Cascades volcanoes, and a host of other hazard sources. To use the point position streams for seismic monitoring, we have developed an inter-process client communication package that captures, buffers and re-broadcasts real-time positions and covariances to a variety of seismic estimation routines running on distributed hardware. An aggregator ingests, re-streams and can rebroadcast up to 24 hours of point-positions and resultant seismic estimates derived from the point positions to application clients distributed across web. A suite of seismic monitoring applications has also been written, which includes position time series analysis, instantaneous displacement vectors, and peak ground displacement contouring and mapping. We have also implemented a continuous estimation of finite-fault slip along the Cascadia megathrust using a NIF-type approach. This currently operates on the terrestrial GPS data streams, but could readily be expanded to use real-time offshore geodetic measurements as well. The continuous slip distributions are used in turn to compute tsunami excitation and, when convolved with pre-computed, hydrodynamic Green functions calculated using the COMCOT tsunami modeling software, run-up estimates for the entire Cascadia coastal margin. Finally, a suite of data visualization tools has been written to allow interaction with the real-time position streams and seismic estimates based on them, including time series plotting, instantaneous offset vectors, peak ground deformation contouring, finite-fault inversions, and tsunami run-up. This suite is currently bundled within a single client written in JAVA, called ';GPS Cockpit,' which is available for download.

WE-C-217BCD-08: Rapid Monte Carlo Simulations of DQE(f) of Scintillator-Based Detectors.

PubMed

Star-Lack, J; Abel, E; Constantin, D; Fahrig, R; Sun, M

2012-06-01

Monte Carlo simulations of DQE(f) can greatly aid in the design of scintillator-based detectors by helping optimize key parameters including scintillator material and thickness, pixel size, surface finish, and septa reflectivity. However, the additional optical transport significantly increases simulation times, necessitating a large number of parallel processors to adequately explore the parameter space. To address this limitation, we have optimized the DQE(f) algorithm, reducing simulation times per design iteration to 10 minutes on a single CPU. DQE(f) is proportional to the ratio, MTF(f)̂2 /NPS(f). The LSF-MTF simulation uses a slanted line source and is rapidly performed with relatively few gammas launched. However, the conventional NPS simulation for standard radiation exposure levels requires the acquisition of multiple flood fields (nRun), each requiring billions of input gamma photons (nGamma), many of which will scintillate, thereby producing thousands of optical photons (nOpt) per deposited MeV. The resulting execution time is proportional to the product nRun x nGamma x nOpt. In this investigation, we revisit the theoretical derivation of DQE(f), and reveal significant computation time savings through the optimization of nRun, nGamma, and nOpt. Using GEANT4, we determine optimal values for these three variables for a GOS scintillator-amorphous silicon portal imager. Both isotropic and Mie optical scattering processes were modeled. Simulation results were validated against the literature. We found that, depending on the radiative and optical attenuation properties of the scintillator, the NPS can be accurately computed using values for nGamma below 1000, and values for nOpt below 500/MeV. nRun should remain above 200. Using these parameters, typical computation times for a complete NPS ranged from 2-10 minutes on a single CPU. The number of launched particles and corresponding execution times for a DQE simulation can be dramatically reduced allowing for accurate computation with modest computer hardware. NIHRO1 CA138426. Several authors work for Varian Medical Systems. © 2012 American Association of Physicists in Medicine.

Gait-cycle characteristics and running economy in elite Eritrean and European runners.

PubMed

Santos-Concejero, Jordan; Oliván, Jesús; Maté-Muñoz, José L; Muniesa, Carlos; Montil, Marta; Tucker, Ross; Lucia, Alejandro

2015-04-01

This study aimed to determine whether biomechanical characteristics such as ground-contact time, swing time, and stride length and frequency contribute to the exceptional running economy of East African runners. Seventeen elite long-distance runners (9 Eritrean, 8 European) performed an incremental maximal running test and 3 submaximal running bouts at 17, 19, and 21 km/h. During the tests, gas-exchange parameters were measured to determine maximal oxygen uptake (VO2max) and running economy (RE). In addition, ground-contact time, swing time, stride length, and stride frequency were measured. The European runners had higher VO2max values than the Eritrean runners (77.2 ± 5.2 vs 73.5 ± 6.0 mL · kg-1 · min-1, P = .011, effect sizes [ES] = 0.65), although Eritrean runners were more economical at 19 km/h (191.4 ± 10.4 vs 205.9 ± 13.3 mL · kg-1 · min-1, P = .026, ES = 1.21). There were no differences between groups for ground-contact time, swing time, stride length, or stride frequency at any speed. Swing time was associated with running economy at 21 km/h in the Eritrean runners (r = .71, P = .033), but no other significant association was found between RE and biomechanical variables. Finally, best 10-km performance was significantly correlated with RE (r = -.57; P = .013). Eritrean runners have superior RE compared with elite European runners. This appears to offset their inferior VO2max. However, the current data suggest that their better RE does not have a biomechanical basis. Other factors, not measured in the current study, may contribute to this RE advantage.

A Study of ATLAS Grid Performance for Distributed Analysis

NASA Astrophysics Data System (ADS)

Panitkin, Sergey; Fine, Valery; Wenaus, Torre

2012-12-01

In the past two years the ATLAS Collaboration at the LHC has collected a large volume of data and published a number of ground breaking papers. The Grid-based ATLAS distributed computing infrastructure played a crucial role in enabling timely analysis of the data. We will present a study of the performance and usage of the ATLAS Grid as platform for physics analysis in 2011. This includes studies of general properties as well as timing properties of user jobs (wait time, run time, etc). These studies are based on mining of data archived by the PanDA workload management system.

Concurrent schedules of wheel-running reinforcement: choice between different durations of opportunity to run in rats.

PubMed

Belke, Terry W

2006-02-01

How do animals choose between opportunities to run of different durations? Are longer durations preferred over shorter durations because they permit a greater number of revolutions? Are shorter durations preferred because they engender higher rates of running? Will longer durations be chosen because running is less constrained? The present study reports on three experiments that attempted to address these questions. In the first experiment, five male Wistar rats chose between 10-sec and 50-sec opportunities to run on modified concurrent variable-interval (VI) schedules. Across conditions, the durations associated with the alternatives were reversed. Response, time, and reinforcer proportions did not vary from indifference. In a second experiment, eight female Long-Evans rats chose between opportunities to run of equal (30 sec) and unequal durations (10 sec and 50 sec) on concurrent variable-ratio (VR) schedules. As in Experiment 1, between presentations of equal duration conditions, 10-sec and 50-sec durations were reversed. Results showed that response, time, and reinforcer proportions on an alternative did not vary with reinforcer duration. In a third experiment, using concurrent VR schedules, durations were systematically varied to decrease the shorter duration toward 0 sec. As the shorter duration decreased, response, time, and reinforcer proportions shifted toward the longer duration. In summary, differences in durations of opportunities to run did not affect choice behavior in a manner consistent with the assumption that a longer reinforcer is a larger reinforcer.

Panel estimation for renewable and non-renewable energy consumption, economic growth, CO2 emissions, the composite trade intensity, and financial openness of the commonwealth of independent states.

PubMed

Rasoulinezhad, Ehsan; Saboori, Behnaz

2018-04-13

This article investigates the long-run and causal linkages between economic growth, CO 2 emissions, renewable and non-renewable (fossil fuels) energy consumption, the Composite Trade Intensity (CTI) as a proxy for trade openness, and the Chinn-Ito index as a proxy for financial openness for a panel of the Commonwealth of Independent States (CIS) region including Armenia, Azerbaijan, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan over the period of 1992-2015. It is the first time that CTI and the Chinn-Ito indexes are used in an economic-pollution model. Employing three panel unit root tests, panel cointegration estimation methods (DOLS and FMOLS), and two panel causality tests, the main empirical results provided evidence for the bidirectional long-run relationship between all the variables in all 12 sampled countries except for economic growth-renewable energy use linkage. The findings of causality tests indicated that there is a unidirectional short-run panel causality running from economic growth, financial openness, and trade openness to CO 2 emissions and from fossil fuel energy consumption to renewable energy use.

Thermoregulatory responses to skin wetting during prolonged treadmill running.

PubMed

Bassett, D R; Nagle, F J; Mookerjee, S; Darr, K C; Ng, A V; Voss, S G; Napp, J P

1987-02-01

We examined the physiological responses to skin wetting during a 120-min level treadmill run to assess whether skin wetting would reduce the dehydration and the increase in core temperature associated with prolonged exercise. Testing was conducted in an environmental chamber (T = 29.5 degrees C, wind velocity = 3 m X sec-1) under two different humidity conditions (33 or 66% relative humidity). Ten male subjects performed two runs in each humidity condition; one served as a control run. The other included spraying the body with 50 ml of water (T = 29.5 degrees C) every 10 min. Spraying had no effect on rectal temperature (Tre), heart rate, oxygen consumption, perceived exertion, sweat loss, or percent change in plasma volume in both the humid and the dry conditions. Spraying produced a significant reduction in mean skin temperature (Tsk), which increased the (Tre - Tsk) gradient. At the same time, overall skin conductance (K) was decreased, presumably as a result of cutaneous vasoconstriction due to the low Tsk. Since heat transfer from the body's core to the skin is expressed by the equation: heat transfer = K X (Tre - Tsk) the spraying had no effect on heat transfer away from the core, and Tre remained unchanged.

PEP-II Hardware Reliability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, C. W.

2005-04-28

Hardware reliability takes on special importance in large accelerator facilities intended to work as factories; i.e., when they are expected to deliver design performance for extended periods of time. The PEP-II B-Factory at SLAC is such a facility. In this paper, we summarize PEP-II reliability statistics from the first four years of production running. The four running periods extended from January 12 through October 31, 2000, from February 4, 2001 through June 30, 2002, from November 15, 2002 through June 30, 2003, and from September 9, 2003 through July 31, 2004. These four periods are designated Runs 1, 2, 3,more » and 4 in the discussion and tables presented in the paper. The first four runs encompassed 30,359 hours. During this time, PEP-II was delivering luminosity to the BaBar detector 57.9 percent of the time. In addition, 5.3 percent of the time was used for scheduled dedicated machine development work, and 4.5 percent was scheduled off for maintenance, installations, or safety checks. Injection and tuning accounted for 19.9 percent. The remaining 12.4 percent was lost due to malfunctions. During this time period, a total of 9701 malfunctions were reported, but most did not interrupt the running program. The unscheduled down time, a total of 3883 hours, was attributed to 1724 of these malfunctions. Mean Time to Fail (MTTF) and Mean Time to Repair (MTTR) are presented for each of the major subsystems, and long-term availability trends are discussed.« less

Metabolic Power in Team Sports - Part 1: An Update.

PubMed

di Prampero, Pietro Enrico; Osgnach, Cristian

2018-06-14

Team sports are characterised by frequent episodes of accelerated/decelerated running. The corresponding energy cost can be estimated on the basis of the biomechanical equivalence between accelerated/decelerated running on flat terrain and constant speed running uphill/downhill. This approach allows one to: (i) estimate the time course of the instantaneous metabolic power requirement of any given player and (ii) infer therefrom the overall energy expenditure of any given time window of a soccer drill or match. In the original approach, walking and running were aggregated and energetically considered as running, even if in team sports several walking periods are interspersed among running bouts. However, since the transition speed between walking and running is known for any given incline of the terrain, we describe here an approach to identify walking episodes, thus utilising the corresponding energy cost which is smaller than in running. In addition, the new algorithm also takes into account the energy expenditure against the air resistance, for both walking and running. The new approach yields overall energy expenditure values, for a whole match,≈14% smaller than the original algorithm; moreover, it shows that the energy expenditure against the air resistance is≈2% of the total. © Georg Thieme Verlag KG Stuttgart · New York.

Runner's Knee

MedlinePlus

... you want to run over a period of time. If you're used to only running a mile or so, don't try to go out and suddenly run 5 miles. Work up to it with a series of intermediate steps. If you've had runner's ...

Coordinating the 2009 RHIC Run

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brookhaven Lab - Mei Bai

2009-04-13

Physicists working at the Brookhaven National Lab's Relativistic Heavy Ion Collider (RHIC) are exploring the puzzle of proton spin as they begin taking data during the 2009 RHIC run. For the first time, RHIC is running at a record energy of 500 giga-elect

Coordinating the 2009 RHIC Run

ScienceCinema

Brookhaven Lab - Mei Bai

2017-12-09

Physicists working at the Brookhaven National Lab's Relativistic Heavy Ion Collider (RHIC) are exploring the puzzle of proton spin as they begin taking data during the 2009 RHIC run. For the first time, RHIC is running at a record energy of 500 giga-elect

E Pluribus Analysis: Applying a Superforecasting Methodology to the Detection of Homegrown Violence

DTIC Science & Technology

2018-03-01

actor violence and a set of predefined decision-making protocols. This research included running four simulations using the Monte Carlo technique, which...actor violence and a set of predefined decision-making protocols. This research included running four simulations using the Monte Carlo technique...PREDICTING RANDOMNESS.............................................................24 1. Using a “ Runs Test” to Determine a Temporal Pattern in Lone

Instrument front-ends at Fermilab during Run II

NASA Astrophysics Data System (ADS)

Meyer, T.; Slimmer, D.; Voy, D.

2011-11-01

The optimization of an accelerator relies on the ability to monitor the behavior of the beam in an intelligent and timely fashion. The use of processor-driven front-ends allowed for the deployment of smart systems in the field for improved data collection and analysis during Run II. This paper describes the implementation of the two main systems used: National Instruments LabVIEW running on PCs, and WindRiver's VxWorks real-time operating system running in a VME crate processor. Work supported by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the United States Department of Energy.

Resting sympatho-vagal balance is related to 10 km running performance in master endurance athletes.

PubMed

Cataldo, Angelo; Bianco, Antonino; Paoli, Antonio; Cerasola, Dario; Alagna, Saverio; Messina, Giuseppe; Zangla, Daniele; Traina, Marcello

2018-01-12

Relationships between heart rate recovery after exercise (HRR, baseline heart rate variability measures (HRV), and time to perform a 10Km running trial (t10Km) were evaluated in "master" athletes of endurance to assess whether the measured indexes may be useful for monitoring the training status of the athletes. Ten "master" athletes of endurance, aged 40-60 years, were recruited. After baseline measures of HRV, the athletes performed a graded maximal test on treadmill and HRR was measured at 1 and 2 minutes from recovery. Subsequently they performed a 10Km running trial and t10Km was related to HRV and HRR indexes. The time to perform a 10Km running trial was significantly correlated with baseline HRV indexes. No correlation was found between t10Km and HRR. Baseline HRV measures, but not HRR, were significantly correlated with the time of performance on 10km running in "master" athletes. The enhanced parasympathetic function at rest appears to be a condition to a better performance on 10km running. HRV can be simple and useful measurements for monitoring the training stratus of athletes and their physical condition in proximity of a competition.

Using Integration and Autonomy to Teach an Elementary Running Unit

ERIC Educational Resources Information Center

Sluder, J. Brandon; Howard-Shaughnessy, Candice

2015-01-01

Cardiovascular fitness is an important aspect of overall fitness, health, and wellness, and running can be an excellent lifetime physical activity. One of the most simple and effective means of exercise, running raises heart rate in a short amount of time and can be done with little to no cost for equipment. There are many benefits to running,…

40 CFR Table 2 to Subpart Dddd of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... this part) Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample... per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method... appendix A of this part) Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour...

Automated home cage observations as a tool to measure the effects of wheel running on cage floor locomotion.

PubMed

de Visser, Leonie; van den Bos, Ruud; Spruijt, Berry M

2005-05-28

This paper introduces automated observations in a modular home cage system as a tool to measure the effects of wheel running on the time distribution and daily organization of cage floor locomotor activity in female C57BL/6 mice. Mice (n = 16) were placed in the home cage system for 6 consecutive days. Fifty percent of the subjects had free access to a running wheel that was integrated in the home cage. Overall activity levels in terms of duration of movement were increased by wheel running, while time spent inside a sheltering box was decreased. Wheel running affected the hourly pattern of movement during the animals' active period of the day. Mice without a running wheel, in contrast to mice with a running wheel, showed a clear differentiation between novelty-induced and baseline levels of locomotion as reflected by a decrease after the first day of introduction to the home cage. The results are discussed in the light of the use of running wheels as a tool to measure general activity and as an object for environmental enrichment. Furthermore, the possibilities of using automated home cage observations for e.g. behavioural phenotyping are discussed.

On Why It Is Impossible to Prove that the BDX90 Dispatcher Implements a Time-sharing System

NASA Technical Reports Server (NTRS)

Boyer, R. S.; Moore, J. S.

1983-01-01

The Software Implemented Fault Tolerance SIFT system, is written in PASCAL except for about a page of machine code. The SIFT system implements a small time sharing system in which PASCAL programs for separate application tasks are executed according to a schedule with real time constraints. The PASCAL language has no provision for handling the notion of an interrupt such as the B930 clock interrupt. The PASCAL language also lacks the notion of running a PASCAL subroutine for a given amount of time, suspending it, saving away the suspension, and later activating the suspension. Machine code was used to overcome these inadequacies of PASCAL. Code which handles clock interrupts and suspends processes is called a dispatcher. The time sharing/virtual machine idea is completely destroyed by the reconfiguration task. After termination of the reconfiguration task, the tasks run by the dispatcher have no relation to those run before reconfiguration. It is impossible to view the dispatcher as a time-sharing system implementing virtual BDX930s running concurrently when one process can wipe out the others.

SPEEDES - A multiple-synchronization environment for parallel discrete-event simulation

NASA Technical Reports Server (NTRS)

Steinman, Jeff S.

1992-01-01

Synchronous Parallel Environment for Emulation and Discrete-Event Simulation (SPEEDES) is a unified parallel simulation environment. It supports multiple-synchronization protocols without requiring users to recompile their code. When a SPEEDES simulation runs on one node, all the extra parallel overhead is removed automatically at run time. When the same executable runs in parallel, the user preselects the synchronization algorithm from a list of options. SPEEDES currently runs on UNIX networks and on the California Institute of Technology/Jet Propulsion Laboratory Mark III Hypercube. SPEEDES also supports interactive simulations. Featured in the SPEEDES environment is a new parallel synchronization approach called Breathing Time Buckets. This algorithm uses some of the conservative techniques found in Time Bucket synchronization, along with the optimism that characterizes the Time Warp approach. A mathematical model derived from first principles predicts the performance of Breathing Time Buckets. Along with the Breathing Time Buckets algorithm, this paper discusses the rules for processing events in SPEEDES, describes the implementation of various other synchronization protocols supported by SPEEDES, describes some new ones for the future, discusses interactive simulations, and then gives some performance results.

Barefoot running does not affect simple reaction time: an exploratory study

PubMed Central

Snow, Nicholas J.; Blair, Jason F.L.; MacDonald, Graham Z.

2018-01-01

Background Converging evidence comparing barefoot (BF) and shod (SH) running highlights differences in foot-strike patterns and somatosensory feedback, among others. Anecdotal evidence from SH runners attempting BF running suggests a greater attentional demand may be experienced during BF running. However, little work to date has examined whether there is an attentional cost of BF versus SH running. Objective This exploratory study aimed to examine whether an acute bout of BF running would impact simple reaction time (SRT) compared to SH running, in a sample of runners naïve to BF running. Methods Eight male distance runners completed SRT testing during 10 min of BF or SH treadmill running at 70% maximal aerobic speed (17.9 ± 1.4 km h−1). To test SRT, participants were required to press a hand-held button in response to the flash of a light bulb placed in the center of their visual field. SRT was tested at 1-minute intervals during running. BF and SH conditions were completed in a pseudo-randomized and counterbalanced crossover fashion. SRT was defined as the time elapsed between the light bulb flash and the button press. SRT errors were also recorded and were defined as the number of trials in which a button press was not recorded in response to the light bulb flash. Results Overall, SRT later in the exercise bouts showed a statistically significant increase compared to earlier (p < 0.05). Statistically significant increases in SRT were present at 7 min versus 5 min (0.29 ± 0.02 s vs. 0.27 ± 0.02 s, p < 0.05) and at 9 min versus 2 min (0.29 ± 0.03 s vs. 0.27 ± 0.03 s, p < 0.05). However, BF running did not influence this increase in SRT (p > 0.05) or the number of SRT errors (17.6 ± 6.6 trials vs. 17.0 ± 13.0 trials, p > 0.05). Discussion In a sample of distance runners naïve to BF running, there was no statistically significant difference in SRT or SRT errors during acute bouts of BF and SH running. We interpret these results to mean that BF running does not have a greater attentional cost compared to SH running during a SRT task throughout treadmill running. Literature suggests that stride-to-stride gait modulation during running may occur predominately via mechanisms that preclude conscious perception, thus potentially attenuating effects of increased somatosensory feedback experienced during BF running. Future research should explore the present experimental paradigm in a larger sample using over-ground running trials, as well as employing different tests of attention. PMID:29666760

A program for performing exact quantum dynamics calculations using cylindrical polar coordinates: A nanotube application

NASA Astrophysics Data System (ADS)

Skouteris, Dimitris; Gervasi, Osvaldo; Laganà, Antonio

2009-03-01

A program that uses the time-dependent wavepacket method to study the motion of structureless particles in a force field of quasi-cylindrical symmetry is presented here. The program utilises cylindrical polar coordinates to express the wavepacket, which is subsequently propagated using a Chebyshev expansion of the Schrödinger propagator. Time-dependent exit flux as well as energy-dependent S matrix elements can be obtained for all states of the particle (describing its angular momentum component along the nanotube axis and the excitation of the radial degree of freedom in the cylinder). The program has been used to study the motion of an H atom across a carbon nanotube. Program summaryProgram title: CYLWAVE Catalogue identifier: AECL_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AECL_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3673 No. of bytes in distributed program, including test data, etc.: 35 237 Distribution format: tar.gz Programming language: Fortran 77 Computer: RISC workstations Operating system: UNIX RAM: 120 MBytes Classification: 16.7, 16.10 External routines: SUNSOFT performance library (not essential) TFFT2D.F (Temperton Fast Fourier Transform), BESSJ.F (from Numerical Recipes, for the calculation of Bessel functions) (included in the distribution file). Nature of problem: Time evolution of the state of a structureless particle in a quasicylindrical potential. Solution method: Time dependent wavepacket propagation. Running time: 50000 secs. The test run supplied with the distribution takes about 10 minutes to complete.

Event visualisation in ALICE - current status and strategy for Run 3

NASA Astrophysics Data System (ADS)

Niedziela, Jeremi; von Haller, Barthélémy

2017-10-01

A Large Ion Collider Experiment (ALICE) is one of the four big experiments running at the Large Hadron Collider (LHC), which focuses on the study of the Quark-Gluon Plasma (QGP) being produced in heavy-ion collisions. The ALICE Event Visualisation Environment (AliEve) is a tool providing an interactive 3D model of the detector’s geometry and a graphical representation of the data. Together with the online reconstruction module, it provides important quality monitoring of the recorded data. As a consequence it has been used in the ALICE Run Control Centre during all stages of Run 2. Static screenshots from the online visualisation are published on the public website - ALICE LIVE. Dedicated converters have been developed to provide geometry and data for external projects. An example of such project is the Total Event Display (TEV) - a visualisation tool recently developed by the CERN Media Lab based on the Unity game engine. It can be easily deployed on any platform, including web and mobile platforms. Another external project is More Than ALICE - an augmented reality application for visitors, overlaying detector descriptions and event visualisations on the camera’s picture. For the future Run 3 both AliEve and TEV will be adapted to fit the ALICE O2 project. Several changes are required due to the new data formats, especially so-called Compressed Time Frames.

An enhanced Ada run-time system for real-time embedded processors

NASA Technical Reports Server (NTRS)

Sims, J. T.

1991-01-01

An enhanced Ada run-time system has been developed to support real-time embedded processor applications. The primary focus of this development effort has been on the tasking system and the memory management facilities of the run-time system. The tasking system has been extended to support efficient and precise periodic task execution as required for control applications. Event-driven task execution providing a means of task-asynchronous control and communication among Ada tasks is supported in this system. Inter-task control is even provided among tasks distributed on separate physical processors. The memory management system has been enhanced to provide object allocation and protected access support for memory shared between disjoint processors, each of which is executing a distinct Ada program.

Nonlinear Analysis of a Bolted Marine Riser Connector Using NASTRAN Substructuring

NASA Technical Reports Server (NTRS)

Fox, G. L.

1984-01-01

Results of an investigation of the behavior of a bolted, flange type marine riser connector is reported. The method used to account for the nonlinear effect of connector separation due to bolt preload and axial tension load is described. The automated multilevel substructing capability of COSMIC/NASTRAN was employed at considerable savings in computer run time. Simplified formulas for computer resources, i.e., computer run times for modules SDCOMP, FBS, and MPYAD, as well as disk storage space, are presented. Actual run time data on a VAX-11/780 is compared with the formulas presented.

The diverse use of clouds by CMS

DOE PAGES

Andronis, Anastasios; Bauer, Daniela; Chaze, Olivier; ...

2015-12-23

The resources CMS is using are increasingly being offered as clouds. In Run 2 of the LHC the majority of CMS CERN resources, both in Meyrin and at the Wigner Computing Centre, will be presented as cloud resources on which CMS will have to build its own infrastructure. This infrastructure will need to run all of the CMS workflows including: Tier 0, production and user analysis. In addition, the CMS High Level Trigger will provide a compute resource comparable in scale to the total offered by the CMS Tier 1 sites, when it is not running as part of themore » trigger system. During these periods a cloud infrastructure will be overlaid on this resource, making it accessible for general CMS use. Finally, CMS is starting to utilise cloud resources being offered by individual institutes and is gaining experience to facilitate the use of opportunistically available cloud resources. Lastly, we present a snap shot of this infrastructure and its operation at the time of the CHEP2015 conference.« less

JAX Colony Management System (JCMS): an extensible colony and phenotype data management system.

PubMed

Donnelly, Chuck J; McFarland, Mike; Ames, Abigail; Sundberg, Beth; Springer, Dave; Blauth, Peter; Bult, Carol J

2010-04-01

The Jackson Laboratory Colony Management System (JCMS) is a software application for managing data and information related to research mouse colonies, associated biospecimens, and experimental protocols. JCMS runs directly on computers that run one of the PC Windows operating systems, but can be accessed via web browser interfaces from any computer running a Windows, Macintosh, or Linux operating system. JCMS can be configured for a single user or multiple users in small- to medium-size work groups. The target audience for JCMS includes laboratory technicians, animal colony managers, and principal investigators. The application provides operational support for colony management and experimental workflows, sample and data tracking through transaction-based data entry forms, and date-driven work reports. Flexible query forms allow researchers to retrieve database records based on user-defined criteria. Recent advances in handheld computers with integrated barcode readers, middleware technologies, web browsers, and wireless networks add to the utility of JCMS by allowing real-time access to the database from any networked computer.

Circadian Rhythm Sleep Disorder, Free-Running Type in a Sighted Male with Severe Depression, Anxiety, and Agoraphobia

PubMed Central

Brown, Mark A.; Quan, Stuart F.; Eichling, Philip S.

2011-01-01

Circadian rhythm sleep disorder, free-running type (CRSD, FRT) is a disorder in which the intrinsic circadian rhythm is no longer entrained to the 24-hour schedule. A unique case of CRSD, FRT in a 67-year-old sighted male is presented. The patient had a progressively delayed time in bed (TIB) each night, so that he would cycle around the 24-h clock approximately every 30 days. This was meticulously documented each night by the patient over the course of 22 years. The patient's CRSD, FRT was associated with severe depression, anxiety, and agoraphobia. The agoraphobia may have exacerbated the CRSD, FRT. Entrainment and stabilization of his circadian rhythm was accomplished after treatment that included melatonin, light therapy, and increased sleep structure. Citation: Brown MA; Quan SF; Eichling PS. Circadian rhythm sleep disorder, free-running type in a sighted male with severe depression, anxiety, and agoraphobia. J Clin Sleep Med 2011;7(1):93-94. PMID:21344043

First International Diagnosis Competition - DXC'09

NASA Technical Reports Server (NTRS)

Kurtoglu, tolga; Narasimhan, Sriram; Poll, Scott; Garcia, David; Kuhn, Lukas; deKleer, Johan; vanGemund, Arjan; Feldman, Alexander

2009-01-01

A framework to compare and evaluate diagnosis algorithms (DAs) has been created jointly by NASA Ames Research Center and PARC. In this paper, we present the first concrete implementation of this framework as a competition called DXC 09. The goal of this competition was to evaluate and compare DAs in a common platform and to determine a winner based on diagnosis results. 12 DAs (model-based and otherwise) competed in this first year of the competition in 3 tracks that included industrial and synthetic systems. Specifically, the participants provided algorithms that communicated with the run-time architecture to receive scenario data and return diagnostic results. These algorithms were run on extended scenario data sets (different from sample set) to compute a set of pre-defined metrics. A ranking scheme based on weighted metrics was used to declare winners. This paper presents the systems used in DXC 09, description of faults and data sets, a listing of participating DAs, the metrics and results computed from running the DAs, and a superficial analysis of the results.

40 CFR Table 2a to Subpart Ce of... - Emissions Limits for Small HMIWI Which Meet the Criteria Under § 60.33e(b)(1)

Code of Federal Regulations, 2011 CFR

2011-07-01

... time 1 Method for demonstrating compliance 2 Particulate matter mg/dscm (gr/dscf) 197 (0.086) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60. Carbon monoxide ppmv 40 3-run average (1-hour minimum...

40 CFR Table 2b to Subpart Ce of... - Emissions Limits for Small HMIWI Which Meet the Criteria Under § 60.33e(b)(2)

Code of Federal Regulations, 2011 CFR

2011-07-01

... time 1 Method for demonstrating compliance 2 Particulate matter mg/dscm (gr/dscf) 87 (0.038) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60. Carbon monoxide ppmv 20 3-run average (1-hour minimum...

How Biomechanical Improvements in Running Economy Could Break the 2-hour Marathon Barrier.

PubMed

Hoogkamer, Wouter; Kram, Rodger; Arellano, Christopher J

2017-09-01

A sub-2-hour marathon requires an average velocity (5.86 m/s) that is 2.5% faster than the current world record of 02:02:57 (5.72 m/s) and could be accomplished with a 2.7% reduction in the metabolic cost of running. Although supporting body weight comprises the majority of the metabolic cost of running, targeting the costs of forward propulsion and leg swing are the most promising strategies for reducing the metabolic cost of running and thus improving marathon running performance. Here, we calculate how much time could be saved by taking advantage of unconventional drafting strategies, a consistent tailwind, a downhill course, and specific running shoe design features while staying within the current International Association of Athletic Federations regulations for record purposes. Specifically, running in shoes that are 100 g lighter along with second-half scenarios of four runners alternately leading and drafting, or a tailwind of 6.0 m/s, combined with a 42-m elevation drop could result in a time well below the 2-hour marathon barrier.

Pre-game perceived wellness highly associates with match running performances during an international field hockey tournament.

PubMed

Ihsan, Mohammed; Tan, Frankie; Sahrom, Sofyan; Choo, Hui Cheng; Chia, Michael; Aziz, Abdul Rashid

2017-06-01

This study examined the associations between pre-game wellness and changes in match running performance normalised to either (i) playing time, (ii) post-match RPE or (iii) both playing time and post-match RPE, over the course of a field hockey tournament. Twelve male hockey players were equipped with global positioning system (GPS) units while competing in an international tournament (six matches over 9 days). The following GPS-derived variables, total distance (TD), low-intensity activity (LIA; <15 km/h), high-intensity running (HIR; >15 km/h), high-intensity accelerations (HIACC; >2 m/s 2 ) and decelerations (HIDEC; >-2 m/s 2 ) were acquired and normalised to either (i) playing time, (ii) post-match RPE or (iii) both playing time and post-match RPE. Each morning, players completed ratings on a 0-10 scale for four variables: fatigue, muscle soreness, mood state and sleep quality, with cumulative scores determined as wellness. Associations between match performances and wellness were analysed using Pearson's correlation coefficient. Combined time and RPE normalisation demonstrated the largest associations with Δwellness compared with time or RPE alone for most variables; TD (r = -0.95; -1.00 to -0.82, p = .004), HIR (r = -0.95; -1.00 to -0.83, p = .003), LIA (r = -0.94; -1.00 to -0.81, p = .026), HIACC (r = -0.87; -1.00 to -0.66, p = .004) and HIDEC (r = -0.90; -0.99 to -0.74, p = .008). These findings support the use of wellness measures as a pre-match tool to assist with managing internal load over the course of a field hockey tournament. Highlights Fixtures during international field hockey tournaments are typically congested and impose high physiological demands on an athlete. To minimise decrements in running performance over the course of a tournament, measures to identify players who have sustained high internal loads are logically warranted. The present study examined the association between changes in simple customised psychometric wellness measures, on changes in match running performance normalised to (i) playing time, (ii) post-match RPE and (iii) playing time and post-match RPE, over the course of a field hockey tournament. Changes in match running performance were better associated to changes in wellness (r = -0.87 to -0.95), when running performances were normalised to both time and RPE compared with time or RPE alone. The present findings support the use of wellness measures as a pre-match tool to assist with managing internal load over the course of a field hockey tournament. Improved associations between wellness scores and match running performances were evident, when running variables were normalised to both playing time and post-match RPE.

Characterization of Foot-Strike Patterns: Lack of an Association With Injuries or Performance in Soldiers.

PubMed

Warr, Bradley J; Fellin, Rebecca E; Sauer, Shane G; Goss, Donald L; Frykman, Peter N; Seay, Joseph F

2015-07-01

Characterize the distribution of foot-strike (FS) patterns in U.S. Army Soldiers and determine if FS patterns are related to self-reported running injuries and performance. 341 male Soldiers from a U.S. Army Combined Arms Battalion ran at their training pace for 100 meters, and FSs were recorded in the sagittal plane. Participants also completed a survey related to training habits, injury history, and run times. Two researchers classified FS patterns as heel strike (HS) or nonheel strike (NHS, combination of midfoot strike and forefoot strike patterns). Two clinicians classified the musculoskeletal injuries as acute or overuse. The relationship of FS type with two-mile run time and running-related injury was analyzed (p ≤ 0.05). The Soldiers predominately landed with an HS (87%) and only 13% were characterized as NHS. Running-related injury was similar between HS (50.3%) and NHS (55.6%) patterns (p = 0.51). There was no difference (p = 0.14) between overuse injury rates between an HS pattern (31.8%) and an NHS pattern (31.0%). Two-mile run times were also similar, with both groups averaging 14:48 minutes. Soldiers were mostly heel strikers (87%) in this U.S. Army Combined Arms Battalion. Neither FS pattern was advantageous for increased performance or decreased incidence of running-related injury. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

Elixir - how to handle 2 trillion pixels

NASA Astrophysics Data System (ADS)

Magnier, Eugene A.; Cuillandre, Jean-Charles

2002-12-01

The Elixir system at CFHT provides automatic data quality assurance and calibration for the wide-field mosaic imager camera CFH12K. Elixir consists of a variety of tools, including: a real-time analysis suite which runs at the telescope to provide quick feedback to the observers; a detailed analysis of the calibration data; and an automated pipeline for processing data to be distributed to observers. To date, 2.4 × 1012 night-time sky pixels from CFH12K have been processed by the Elixir system.

Integrated four-channel all-fiber up-conversion single-photon-detector with adjustable efficiency and dark count.

PubMed

Zheng, Ming-Yang; Shentu, Guo-Liang; Ma, Fei; Zhou, Fei; Zhang, Hai-Ting; Dai, Yun-Qi; Xie, Xiuping; Zhang, Qiang; Pan, Jian-Wei

2016-09-01

Up-conversion single photon detector (UCSPD) has been widely used in many research fields including quantum key distribution, lidar, optical time domain reflectrometry, and deep space communication. For the first time in laboratory, we have developed an integrated four-channel all-fiber UCSPD which can work in both free-running and gate modes. This compact module can satisfy different experimental demands with adjustable detection efficiency and dark count. We have characterized the key parameters of the UCSPD system.

Relationship between percentages of heart rate reserve and oxygen uptake reserve during cycling and running: a validation study.

PubMed

Guimarães, Giovanna C; Farinatti, Paulo T V; Midgley, Adrian W; Vasconcellos, Fabrício; Vigário, Patrícia; Cunha, Felipe A

2017-06-22

The present study investigated the relationship between percentages of heart rate reserve (%HRR) and oxygen uptake reserve (%VO2R) during a cardiopulmonary exercise test (CPET) and discrete bouts of isocaloric cycling and treadmill running. Thirty men visited the laboratory three times for anthropometrical and resting VO2 assessments, and perform cycling and running CPETs. Ten men visited the laboratory twice more to investigate the validity of the %HRR-%VO2R relationships during isocaloric bouts of cycling and running at 75% VO2R with energy expenditures of 400 kcals. The %HRR was significantly higher than the %VO2R during both CPETs at all exercise intensities (P < 0.001). During isocaloric exercise bouts, mean %HRR-%VO2R differences of 6.5% and 7.0% were observed for cycling and running, respectively (P = 0.007 to P < 0.001). The %HRR and %VO2R increased over time (P < 0.001), the rate of which was influenced by exercise modality (P < 0.001). On average, heart rate was 5 (P = 0.007) and 8 (P < 0.001) beats·min higher than predicted from the second energy expenditure quartile for cycling and running, respectively; however, observed VO2 was lower than predicted during all quartiles for cycling, and the first quartile for running. Consequently, time to achieve the target energy expenditure was greater than predicted (P < 0.01). In conclusion, the %HRR-%VO2R relationship observed during CPET data did not accurately transpose to prolonged isocaloric bouts of cycling and running. Additionally, power outputs and speeds defined by the ACSM equations for cycling and running, respectively, overestimated VO2 and energy expenditure.

Effect of Recording Duration on the Diagnostic Performance of Multifocal Visual-evoked Potentials in High-risk Ocular Hypertension and Early Glaucoma

PubMed Central

Fortune, Brad; Zhang, Xian; Hood, Donald C.; Demirel, Shaban; Patterson, Emily; Jamil, Annisa; Mansberger, Steven L.; Cioffi, George A.; Johnson, Chris A.

2010-01-01

Purpose To evaluate the effect on diagnostic performance of reducing multifocal visual-evoked potential (mfVEP) recording duration from 16 to 8 minutes per eye. Methods Both eyes of 185 individuals with high-risk ocular hypertension or early glaucoma were studied. Two 8-minute mfVEP recordings were obtained for each eye in an ABBA order using VERIS. The first recording for each eye was compared against single run (1-Run) mfVEP normative data; the average of both recordings for each eye was compared against 2-Run normative data. Visual fields (VFs) were obtained by standard automated perimetry (SAP) within 22.3±27.0 days of the mfVEP. Stereo disc photographs and Heidelberg Retina Tomograph images were obtained together, within 24.8±50.4 days of the mfVEP and 33.1±62.9 days of SAP. Masked experts graded disc photographs as either glaucomatous optic neuropathy or normal. The overall Moorfields Regression Analysis result from the Heidelberg Retina Tomograph was used as a separate diagnostic classification. Thus, 4 diagnostic standards were applied in total, 2 based on optic disc structure alone and 2 others based on disc structure and SAP. Results Agreement between the 1-Run and 2-Run mfVEP was 90%. Diagnostic performance of the 1-Run mfVEP was similar to that of the 2-Run mfVEP for all 4 diagnostic standards. Sensitivity was slightly higher for the 2-Run mfVEP, whereas specificity was slightly higher for the 1-Run mfVEP. Conclusions If higher sensitivity is sought, the 2-Run mfVEP will provide better discrimination between groups of eyes with relatively high signal-to-noise ratio (eg, early glaucoma or high-risk suspects). But if higher specificity is a more important goal, the 1-Run mfVEP provides adequate sensitivity and requires only half the test time. Considered alongside prior studies, the present results suggest that the 1-Run mfVEP is an efficient way to confirm (or refute) the extent of VF loss in patients with moderate or advanced glaucoma, particularly in those with unreliable VFs, including malingering or other “functional” forms of VF loss. PMID:18414101

Incidence of Running-Related Injuries Per 1000 h of running in Different Types of Runners: A Systematic Review and Meta-Analysis.

PubMed

Videbæk, Solvej; Bueno, Andreas Moeballe; Nielsen, Rasmus Oestergaard; Rasmussen, Sten

2015-07-01

No systematic review has identified the incidence of running-related injuries per 1000 h of running in different types of runners. The purpose of the present review was to systematically search the literature for the incidence of running-related injuries per 1000 h of running in different types of runners, and to include the data in meta-analyses. A search of the PubMed, Scopus, SPORTDiscus, PEDro and Web of Science databases was conducted. Titles, abstracts, and full-text articles were screened by two blinded reviewers to identify prospective cohort studies and randomized controlled trials reporting the incidence of running-related injuries in novice runners, recreational runners, ultra-marathon runners, and track and field athletes. Data were extracted from all studies and comprised for further analysis. An adapted scale was applied to assess the risk of bias. After screening 815 abstracts, 13 original articles were included in the main analysis. Running-related injuries per 1000 h of running ranged from a minimum of 2.5 in a study of long-distance track and field athletes to a maximum of 33.0 in a study of novice runners. The meta-analyses revealed a weighted injury incidence of 17.8 (95% confidence interval [CI] 16.7-19.1) in novice runners and 7.7 (95% CI 6.9-8.7) in recreational runners. Heterogeneity in definitions of injury, definition of type of runner, and outcome measures in the included full-text articles challenged comparison across studies. Novice runners seem to face a significantly greater risk of injury per 1000 h of running than recreational runners.

Understanding resonance graphs using Easy Java Simulations (EJS) and why we use EJS

NASA Astrophysics Data System (ADS)

Wee, Loo Kang; Lee, Tat Leong; Chew, Charles; Wong, Darren; Tan, Samuel

2015-03-01

This paper reports a computer model simulation created using Easy Java Simulation (EJS) for learners to visualize how the steady-state amplitude of a driven oscillating system varies with the frequency of the periodic driving force. The simulation shows (N = 100) identical spring-mass systems being subjected to (1) a periodic driving force of equal amplitude but different driving frequencies, and (2) different amounts of damping. The simulation aims to create a visually intuitive way of understanding how the series of amplitude versus driving frequency graphs are obtained by showing how the displacement of the system changes over time as it transits from the transient to the steady state. A suggested ‘how to use’ the model is added to help educators and students in their teaching and learning, where we explain the theoretical steady-state equation time conditions when the model begins to allow data recording of maximum amplitudes to closely match the theoretical equation, and the steps to collect different runs of the degree of damping. We also discuss two of the design features in our computer model: displaying the instantaneous oscillation together with the achieved steady-state amplitudes, and the explicit world view overlay with scientific representation with different degrees of damping runs. Three advantages of using EJS include: (1) open source codes and creative commons attribution licenses for scaling up of interactively engaging educational practices; (2) the models made can run on almost any device, including Android and iOS; and (3) it allows the redefinition of physics educational practices through computer modeling.

TIM, a ray-tracing program for METATOY research and its dissemination

NASA Astrophysics Data System (ADS)

Lambert, Dean; Hamilton, Alasdair C.; Constable, George; Snehanshu, Harsh; Talati, Sharvil; Courtial, Johannes

2012-03-01

TIM (The Interactive METATOY) is a ray-tracing program specifically tailored towards our research in METATOYs, which are optical components that appear to be able to create wave-optically forbidden light-ray fields. For this reason, TIM possesses features not found in other ray-tracing programs. TIM can either be used interactively or by modifying the openly available source code; in both cases, it can easily be run as an applet embedded in a web page. Here we describe the basic structure of TIM's source code and how to extend it, and we give examples of how we have used TIM in our own research. Program summaryProgram title: TIM Catalogue identifier: AEKY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 124 478 No. of bytes in distributed program, including test data, etc.: 4 120 052 Distribution format: tar.gz Programming language: Java Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6 Operating system: Any; developed under Mac OS X Version 10.6 RAM: Typically 145 MB (interactive version running under Mac OS X Version 10.6) Classification: 14, 18 External routines: JAMA [1] (source code included) Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories; can visualise geometric optic transformations; can create anaglyphs (for viewing with coloured "3D glasses") and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene.

26 CFR 301.6503(d)-1 - Suspension of running of period of limitation; extension of time for payment of estate tax.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Suspension of running of period of limitation... ADMINISTRATION Limitations Limitations on Assessment and Collection § 301.6503(d)-1 Suspension of running of... payment of any estate tax, the running of the period of limitations for collection of such tax is...

26 CFR 301.6503(d)-1 - Suspension of running of period of limitation; extension of time for payment of estate tax.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Suspension of running of period of limitation... ADMINISTRATION Limitations Limitations on Assessment and Collection § 301.6503(d)-1 Suspension of running of... payment of any estate tax, the running of the period of limitations for collection of such tax is...