Conversion of evanescent Lamb waves into propagating waves via a narrow aperture edge.

PubMed

Yan, Xiang; Yuan, Fuh-Gwo

2015-06-01

This paper presents a quantitative study of conversion of evanescent Lamb waves into propagating in isotropic plates. The conversion is substantiated by prescribing time-harmonic Lamb displacements/tractions through a narrow aperture at an edge of a semi-infinite plate. Complex-valued dispersion and group velocity curves are employed to characterize the conversion process. The amplitude coefficient of the propagating Lamb modes converted from evanescent is quantified based on the complex reciprocity theorem via a finite element analysis. The power flow generated into the plate can be separated into radiative and reactive parts made on the basis of propagating and evanescent Lamb waves, where propagating Lamb waves are theoretically proved to radiate pure real power flow, and evanescent Lamb waves carry reactive pure imaginary power flow. The propagating power conversion efficiency is then defined to quantitatively describe the conversion. The conversion efficiency is strongly frequency dependent and can be significant. With the converted propagating waves from evanescent, sensors at far-field can recapture some localized damage information that is generally possessed in evanescent waves and may have potential application in structural health monitoring.

Lamb Wave Response of Fatigued Composite Samples

NASA Technical Reports Server (NTRS)

Seale, Michael; Smith, Barry T.; Prosser, William H.; Masters, John E.

1994-01-01

Composite materials are being more widely used today by aerospace, automotive, sports equipment, and a number of other commercial industries because of their advantages over conventional metals. Composites have a high strength-to-weight ratio and can be constructed to meet specific design needs. Composite structures are already in use in secondary parts of the Douglas MD-11 and are planned to be used in the new MD-12X. Plans also exist for their use in primary and secondary structures on the Boeing 777. Douglas proposed MD-XX may also incorporate composite materials into primary structures such as the wings and tail. Use of composites in these structures offers weight savings, corrosion resistance, and improved aerodynamics. Additionally, composites have been used to repair cracks in many B-1Bs where traditional repair techniques were not very effective. Plans have also been made to reinforce all of the remaining B-1s with composite materials. Verification of the structural integrity of composite components is needed to insure safe operation of these aerospace vehicles. One aspect of the use of these composites is their response to fatigue. To track this progression of fatigue in aerospace structures, a convenient method to nondestructively monitor this damage needs to be developed. Traditional NDE techniques used on metals are not easily adaptable to composites due to the inhomogeneous and anisotropic nature of these materials. Finding an effective means of nondestructively monitoring fatigue damage is extremely important to the safety and reliability of such structures. Lamb waves offer one method of evaluating these composite materials. As a material is fatigued, the modulus degrades. Since the Lamb wave velocity can be related to the modulus of the material, an effective tool can be developed to monitor fatigue damage in composites by measuring the velocity of these waves. In this work, preliminary studies have been conducted which monitor fatigue damage in

Investigating the thermally induced acoustoelastic effect in isotropic media with Lamb waves

PubMed Central

Dodson, Jacob C.; Inman, Daniel J.

2014-01-01

Elastic wave velocities in metallic structures are affected by variations in environmental conditions such as changing temperature. This paper extends the theory of acoustoelasticity by allowing thermally induced strains in unconstrained isotropic media, and it experimentally examines the velocity variation of Lamb waves in aluminum plates (AL-6061) due to isothermal temperature deviations. This paper presents both thermally induced acoustoelastic constants and thermally varying effective Young's modulus and Poisson's ratio which include the third order elastic material constants. The experimental thermal sensitivity of the phase velocity (∂vP/∂θ) for both the symmetric and antisymmetric modes are bounded by two theories, the acoustoelastic Lamb wave theory with thermo-acoustoelastic tensors and the thermoelastic Lamb wave theory using an effective thermo-acoustoelastic moduli. This paper shows the theoretical thermally induced acoustoelastic Lamb wave thermal sensitivity (∂vP/∂θ) is an upper bound approximation of the experimental thermal changes, but the acoustoelastic Lamb wave theory is not valid for predicting the antisymmetric (A0) phase velocity at low frequency-thickness values, <1.55 MHz mm for various temperatures. PMID:25373955

Temperature effects in ultrasonic Lamb wave structural health monitoring systems.

PubMed

Lanza di Scalea, Francesco; Salamone, Salvatore

2008-07-01

There is a need to better understand the effect of temperature changes on the response of ultrasonic guided-wave pitch-catch systems used for structural health monitoring. A model is proposed to account for all relevant temperature-dependent parameters of a pitch-catch system on an isotropic plate, including the actuator-plate and plate-sensor interactions through shear-lag behavior, the piezoelectric and dielectric permittivity properties of the transducers, and the Lamb wave dispersion properties of the substrate plate. The model is used to predict the S(0) and A(0) response spectra in aluminum plates for the temperature range of -40-+60 degrees C, which accounts for normal aircraft operations. The transducers examined are monolithic PZT-5A [PZT denotes Pb(Zr-Ti)O3] patches and flexible macrofiber composite type P1 patches. The study shows substantial changes in Lamb wave amplitude response caused solely by temperature excursions. It is also shown that, for the transducers considered, the response amplitude changes follow two opposite trends below and above ambient temperature (20 degrees C), respectively. These results can provide a basis for the compensation of temperature effects in guided-wave damage detection systems.

Mixing of ultrasonic Lamb waves in thin plates with quadratic nonlinearity.

PubMed

Li, Feilong; Zhao, Youxuan; Cao, Peng; Hu, Ning

2018-07-01

This paper investigates the propagation of Lamb waves in thin plates with quadratic nonlinearity by one-way mixing method using numerical simulations. It is shown that an A 0 -mode wave can be generated by a pair of S 0 and A 0 mode waves only when mixing condition is satisfied, and mixing wave signals are capable of locating the damage zone. Additionally, it is manifested that the acoustic nonlinear parameter increases linearly with quadratic nonlinearity but monotonously with the size of mixing zone. Furthermore, because of frequency deviation, the waveform of the mixing wave changes significantly from a regular diamond shape to toneburst trains. Copyright © 2018 Elsevier B.V. All rights reserved.

Lamb Wave Assessment of Fatigue and Thermal Damage in Composites

NASA Technical Reports Server (NTRS)

Seale, Michael D.; Smith, Barry T.; Prosser, W. H.

2004-01-01

Among the various techniques available, ultrasonic Lamb waves offer a convenient method of evaluating composite materials. Since the Lamb wave velocity depends on the elastic properties of a structure, an effective tool exists to monitor damage in composites by measuring the velocity of these waves. Lamb wave measurements can propagate over long distances and are sensitive to the desired in-plane elastic properties of the material. This paper describes two studies which monitor fatigue damage and two studies which monitor thermal damage in composites using Lamb waves. In the fatigue studies, the Lamb wave velocity is compared to modulus measurements obtained using strain gage measurements in the first experiment and the velocity is monitored along with the crack density in the second. In the thermal damage studies, one examines samples which were exposed to varying temperatures for a three minute duration and the second includes rapid thermal damage in composites by intense laser beams. In all studies, the Lamb wave velocity is demonstrated to be an excellent method to monitor damage in composites.

Quantitative Evaluation of Delamination in Composites Using Lamb Waves

NASA Astrophysics Data System (ADS)

Michalcová, L.; Hron, R.

2018-03-01

Ultrasonic guided wave monitoring has become very popular in the area of structural health monitoring (SHM) of aerospace structures. Any possible type of damage must be reliably assessed. The paper deals with delamination length determination in DCB specimens using Lamb waves. An analytical equation based on the velocity dependence on variable thickness is utilized. The group velocity of the fundamental antisymmetric A0 mode rapidly changes in a particular range of the frequency-thickness product. Using the same actuation frequency the propagation velocity is different for delaminated structure. Lamb wave based delamination lengths were compared to the visually determined lengths. The method of the wave velocity determination proved to be essential. More accurate results were achieved by tracking the maximum amplitude of A0 mode than the first signal arrival. These findings are considered as the basis for the damage evaluation of complex structures.

Lamb Wave Damage Quantification Using GA-Based LS-SVM.

PubMed

Sun, Fuqiang; Wang, Ning; He, Jingjing; Guan, Xuefei; Yang, Jinsong

2017-06-12

Lamb waves have been reported to be an efficient tool for non-destructive evaluations (NDE) for various application scenarios. However, accurate and reliable damage quantification using the Lamb wave method is still a practical challenge, due to the complex underlying mechanism of Lamb wave propagation and damage detection. This paper presents a Lamb wave damage quantification method using a least square support vector machine (LS-SVM) and a genetic algorithm (GA). Three damage sensitive features, namely, normalized amplitude, phase change, and correlation coefficient, were proposed to describe changes of Lamb wave characteristics caused by damage. In view of commonly used data-driven methods, the GA-based LS-SVM model using the proposed three damage sensitive features was implemented to evaluate the crack size. The GA method was adopted to optimize the model parameters. The results of GA-based LS-SVM were validated using coupon test data and lap joint component test data with naturally developed fatigue cracks. Cases of different loading and manufacturer were also included to further verify the robustness of the proposed method for crack quantification.

Lamb Wave Damage Quantification Using GA-Based LS-SVM

PubMed Central

Sun, Fuqiang; Wang, Ning; He, Jingjing; Guan, Xuefei; Yang, Jinsong

2017-01-01

Lamb waves have been reported to be an efficient tool for non-destructive evaluations (NDE) for various application scenarios. However, accurate and reliable damage quantification using the Lamb wave method is still a practical challenge, due to the complex underlying mechanism of Lamb wave propagation and damage detection. This paper presents a Lamb wave damage quantification method using a least square support vector machine (LS-SVM) and a genetic algorithm (GA). Three damage sensitive features, namely, normalized amplitude, phase change, and correlation coefficient, were proposed to describe changes of Lamb wave characteristics caused by damage. In view of commonly used data-driven methods, the GA-based LS-SVM model using the proposed three damage sensitive features was implemented to evaluate the crack size. The GA method was adopted to optimize the model parameters. The results of GA-based LS-SVM were validated using coupon test data and lap joint component test data with naturally developed fatigue cracks. Cases of different loading and manufacturer were also included to further verify the robustness of the proposed method for crack quantification. PMID:28773003

Propagation of time-reversed Lamb waves in bovine cortical bone in vitro.

PubMed

Lee, Kang Il; Yoon, Suk Wang

2015-01-01

The present study aims to investigate the propagation of time-reversed Lamb waves in bovine cortical bone in vitro. The time-reversed Lamb waves were successfully launched at 200 kHz in 18 bovine tibiae through a time reversal process of Lamb waves. The group velocities of the time-reversed Lamb waves in the bovine tibiae were measured using the axial transmission technique. They showed a significant correlation with the cortical thickness and tended to follow the theoretical group velocity of the lowest order antisymmetrical Lamb wave fairly well, consistent with the behavior of the slow guided wave in long cortical bones.

Detection of crack in thin cylindrical pipes using piezo-actuated Lamb waves

NASA Astrophysics Data System (ADS)

Tua, P. S.; Quek, S. T.; Wang, Q.

2005-05-01

The detection of cracks in beams and plates using piezo-actuated Lamb waves has been presented in the last SPIE Symposium. This paper is an extension of the technique to pipes. It has been shown that for a thin-walled pipe, the assumption of Lamb wave propagation is valid. Such waves can be efficiently excited using piezoceramic transducers (PZT) with good control on the pulse characteristics to assess the health of structural components, such as the presence of cracks. In this paper, a systematic methodology to detect and locate cracks in homogenous cylinder/pipe based on the time-of-flight and strength analysis of propagating Lamb wave is proposed. By observing the attenuation in strength of the direct wave incidence at the sensor, the presence of a crack along the propagation path can be determined. At least four actuation positions, two on each end of the pipe segment of interest, are needed to exhaustively interrogate for the presence of cracks. The detailed procedure for locating and tracing the geometry of the crack(s) is described. It is shown experimentally that the detection using circular PZT actuator and sensor, with dimensions of 5.0 mm diameter and 0.5 mm thick, is possible for an aluminum pipe segment of up to at least 4.0 m in length. The proposed methodology is also explored for the aluminum pipe under more practical situations, such as burying it in sand with only the actuator and sensor positions exposed. Experimental results obtained showed the feasibility of detecting the 'concealed' crack on the pipe buried in sand.

Non-contact ultrasonic gas flow metering using air-coupled leaky Lamb waves.

PubMed

Fan, Zichuan; Jiang, Wentao; Wright, William M D

2018-04-23

This paper describes a completely non-contact ultrasonic method of gas flow metering using air-coupled leaky Lamb waves. To show proof of principle, a simplified representation of gas flow in a duct, comprising two separated thin isotropic plates with a gas flowing between them, has been modelled and investigated experimentally. An airborne compression wave emitted from an air-coupled capacitive ultrasonic transducer excited a leaky Lamb wave in the first plate in a non-contact manner. The leakage of this Lamb wave crossed the gas flow at an angle between the two plates as a compression wave, and excited a leaky Lamb wave in the second plate. An air-coupled capacitive ultrasonic transducer on the opposite side of this second plate then detected the airborne compression wave leakage from the second Lamb wave. As the gas flow shifted the wave field between the two plates, the point of Lamb wave excitation in the second plate was displaced in proportion to the gas flow rate. Two such measurements, in opposite directions, formed a completely non-contact contra-propagating Lamb wave flow meter, allowing measurement of the flow velocity between the plates. A COMSOL Multiphysics® model was used to visualize the wave fields, and accurately predicted the time differences that were then measured experimentally. Experiments using different Lamb wave frequencies and plate materials were also similarly verified. This entirely non-contact airborne approach to Lamb wave flow metering could be applied in place of clamp-on techniques in thin-walled ducts or pipes. Copyright © 2018 Elsevier B.V. All rights reserved.

Demonstration of Shear Waves, Lamb Waves, and Rayleigh Waves by Mode Conversion.

ERIC Educational Resources Information Center

Leung, W. P.

1980-01-01

Introduces an experiment that can be demonstrated in the classroom to show that shear waves, Rayleigh waves, and Lamb waves can be easily generated and observed by means of mode conversion. (Author/CS)

Nondestructive testing of CFRP plates by Lamb waves

NASA Astrophysics Data System (ADS)

Tsushima, Satoshi; Fukiage, Norio; Ono, Masao

1993-03-01

Nondestructive testing based on low frequency Lamb waves was used to analyze the thickness of plates, the delamination, the fiber contents, and the wave velocities in composite laminates. The thickness of plates was predicted and the delamination was detected using the relationship between the phase velocities of Lamb waves and the product of frequency and plate thickness. The fiber content was predicted from the stationary waves, and the wave velocity propagating at an angle to the fiber direction was calculated using the Young's modulus.

Using Ultrasonic Lamb Waves To Measure Moduli Of Composites

NASA Technical Reports Server (NTRS)

Kautz, Harold E.

1995-01-01

Measurements of broad-band ultrasonic Lamb waves in plate specimens of ceramic-matrix/fiber and metal-matrix/fiber composite materials used to determine moduli of elasticity of materials. In one class of potential applications of concept, Lamb-wave responses of specimens measured and analyzed at various stages of thermal and/or mechanical processing to determine effects of processing, without having to dissect specimens. In another class, structural components having shapes supporting propagation of Lamb waves monitored ultrasonically to identify signs of deterioration and impending failure.

Lamb Waves Decomposition and Mode Identification Using Matching Pursuit Method

DTIC Science & Technology

2009-01-01

Wigner - Ville distribution ( WVD ). However, WVD suffers from severe interferences, called cross-terms. Cross- terms are the area of a time-frequency...transform (STFT), wavelet transform, Wigner - Ville distribution , matching pursuit decomposition, etc. 1 Report Documentation Page Form ApprovedOMB No...MP decomposition using chirplet dictionary was applied to a simulated S0 mode Lamb wave shown previously in Figure 2a. Wigner - Ville distribution of

The numerical simulation of Lamb wave propagation in laser welding of stainless steel

NASA Astrophysics Data System (ADS)

Zhang, Bo; Liu, Fang; Liu, Chang; Li, Jingming; Zhang, Baojun; Zhou, Qingxiang; Han, Xiaohui; Zhao, Yang

2017-12-01

In order to explore the Lamb wave propagation in laser welding of stainless steel, the numerical simulation is used to show the feature of Lamb wave. In this paper, according to Lamb dispersion equation, excites the Lamb wave on the edge of thin stainless steel plate, and presents the reflection coefficient for quantizing the Lamb wave energy, the results show that the reflection coefficient is increased with the welding width increasing,

Intelligent feature selection techniques for pattern classification of Lamb wave signals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinders, Mark K.; Miller, Corey A.

2014-02-18

Lamb wave interaction with flaws is a complex, three-dimensional phenomenon, which often frustrates signal interpretation schemes based on mode arrival time shifts predicted by dispersion curves. As the flaw severity increases, scattering and mode conversion effects will often dominate the time-domain signals, obscuring available information about flaws because multiple modes may arrive on top of each other. Even for idealized flaw geometries the scattering and mode conversion behavior of Lamb waves is very complex. Here, multi-mode Lamb waves in a metal plate are propagated across a rectangular flat-bottom hole in a sequence of pitch-catch measurements corresponding to the double crossholemore » tomography geometry. The flaw is sequentially deepened, with the Lamb wave measurements repeated at each flaw depth. Lamb wave tomography reconstructions are used to identify which waveforms have interacted with the flaw and thereby carry information about its depth. Multiple features are extracted from each of the Lamb wave signals using wavelets, which are then fed to statistical pattern classification algorithms that identify flaw severity. In order to achieve the highest classification accuracy, an optimal feature space is required but it’s never known a priori which features are going to be best. For structural health monitoring we make use of the fact that physical flaws, such as corrosion, will only increase over time. This allows us to identify feature vectors which are topologically well-behaved by requiring that sequential classes “line up” in feature vector space. An intelligent feature selection routine is illustrated that identifies favorable class distributions in multi-dimensional feature spaces using computational homology theory. Betti numbers and formal classification accuracies are calculated for each feature space subset to establish a correlation between the topology of the class distribution and the corresponding classification accuracy.« less

Background Lamb waves in the Earth's atmosphere

NASA Astrophysics Data System (ADS)

Nishida, K.; Kobayashi, N.; Fukao, Y.

2013-12-01

Lamb waves of the Earth's atmosphere in the millihertz band have been considered as transient phenomena excited only by large events [e.g. the major volcanic eruption of Krakatoa in 1833, the impact of Siberian meteorite in 1908, the testing of large nuclear tests and the huge earthquakes, Garrett1969]. In a case of the solid Earth, observation of background free oscillations in the millihertz band-now known as Earth's background free oscillations or seismic hum, has been firmly established. Above 5 mHz, their dominant excitation sources are oceanic infragravity waves. At 3.7 and 4.4 mHz an elasto-acoustic resonance between the solid Earth and the atmosphere was observed [Nishida et al., 2000]. These seismic observations show that the contribution of atmospheric disturbances to the seismic hum is dominant below 5 mHz. Such contribution implies background excitations of acoustic-gravity waves in this frequency range. For direct detection of the background acoustic-gravity waves, our group conducted observations using an array of barometers [Nishida et al. 2005]. However, the spatial scale of the array of about 10 km was too small to detect acoustic modes below 10 mHz. Since then, no direct observations of these waves have been reported. In 2011, 337 high-resolution microbarometers were installed on a continental scale at USArray Transportable Array. The large and dense array enables us to detect the background atmospheric waves. Here, we show the first evidence of background Lamb waves in the Earth's atmosphere from 0.2 to 10 mHz, based on the array analysis of microbarometer data from the USArray in 2012. The observations suggest that the excitation sources are atmospheric disturbances in the troposphere. Theoretically, their energy in the troposphere tunnels into the thermosphere at a resonant frequency via thermospheric gravity wave, where the observed amplitudes indeed take a local minimum. The energy leak through the frequency window could partly contribute to

Temperature effects on the band gaps of Lamb waves in a one-dimensional phononic-crystal plate (L).

PubMed

Cheng, Y; Liu, X J; Wu, D J

2011-03-01

This study investigates the temperature-tuned band gaps of Lamb waves in a one-dimensional phononic-crystal plate, which is formed by alternating strips of ferroelectric ceramic Ba(0.7)Sr(0.3)TiO(3) and epoxy. The sensitive and continuous temperature-tunability of Lamb wave band gaps is demonstrated using the analyses of the band structures and the transmission spectra. The width and position of Lamb wave band gaps shift prominently with variation of temperature in the range of 26 °C-50 °C. For example, the width of the second band gap increases from 0.066 to 0.111 MHz as the temperature is increased from 26 °C to 50 °C. The strong shift promises that the structure could be suitable for temperature-tuned multi-frequency Lamb wave filters. © 2011 Acoustical Society of America

Relationships of the group velocity of the time-reversed Lamb wave with bone properties in cortical bone in vitro.

PubMed

Lee, Kang Il; Yoon, Suk Wang

2017-04-11

The present study aims to investigate the feasibility of using the time-reversed Lamb wave as a new method for noninvasive characterization of long cortical bones. The group velocity of the time-reversed Lamb wave launched by using the modified time reversal method was measured in 15 bovine tibiae, and their correlations with the bone properties of the tibia were examined. The group velocity of the time-reversed Lamb wave showed significant positive correlations with the bone properties (r=0.55-0.81). The best univariate predictor of the group velocity of the time-reversed Lamb wave was the cortical thickness, yielding an adjusted squared correlation coefficient (r 2 ) of 0.64. These results imply that the group velocity of the time-reversed Lamb wave, in addition to the velocities of the first arriving signal and the slow guided wave, could potentially be used as a discriminator for osteoporosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Fatigue Crack Size Evaluation Method Based on Lamb Wave Simulation and Limited Experimental Data

PubMed Central

He, Jingjing; Ran, Yunmeng; Liu, Bin; Yang, Jinsong; Guan, Xuefei

2017-01-01

This paper presents a systematic and general method for Lamb wave-based crack size quantification using finite element simulations and Bayesian updating. The method consists of construction of a baseline quantification model using finite element simulation data and Bayesian updating with limited Lamb wave data from target structure. The baseline model correlates two proposed damage sensitive features, namely the normalized amplitude and phase change, with the crack length through a response surface model. The two damage sensitive features are extracted from the first received S0 mode wave package. The model parameters of the baseline model are estimated using finite element simulation data. To account for uncertainties from numerical modeling, geometry, material and manufacturing between the baseline model and the target model, Bayesian method is employed to update the baseline model with a few measurements acquired from the actual target structure. A rigorous validation is made using in-situ fatigue testing and Lamb wave data from coupon specimens and realistic lap-joint components. The effectiveness and accuracy of the proposed method is demonstrated under different loading and damage conditions. PMID:28902148

Study of Lamb Waves for Non-Destructive Testing Behind Screens

NASA Astrophysics Data System (ADS)

Kauffmann, P.; Ploix, M.-A.; Chaix, J.-F.; Gueudré, C.; Corneloup, G.; Baqué, F. AF(; )

2018-01-01

The inspection and control of sodium-cooled fast reactors (SFR) is a major issue for the nuclear industry. Ultrasonic solutions are under study because of the opacity of liquid sodium. In this paper, the use of leaky Lamb waves is considered for non-destructive testing (NDT) on parallel and immersed structures assimilated as plates. The first phase of our approach involved studying the propagation properties of leaky Lamb waves. Equations that model the propagation of Lamb waves in an immersed plate were solved numerically. The phase velocity can be experimentally measured using a two dimensional Fourier transform. The group velocity can be experimentally measured using a short-time Fourier transform technique. Attenuation of leaky Lamb waves is mostly due to the re-emission of energy into the surrounding fluid, and it can be measured by these two techniques.

Detecting Lamb waves with broadband acousto-ultrasonic signals in composite structures

NASA Technical Reports Server (NTRS)

Kautz, Harold E.

1992-01-01

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and lowest antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave disperison curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMCs, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Analysis of Rayleigh-Lamb Modes in Soft-solids with Application to Surface Wave Elastography

NASA Astrophysics Data System (ADS)

Benech, Nicolás; Grinspan, Gustavo; Aguiar, Sofía; Brum, Javier; Negreira, Carlos; tanter, Mickäel; Gennisson, Jean-Luc

The goal of Surface Wave Elastography (SE) techniques is to estimate the shear elasticity of the sample by measuring the surface wave speed. In SE the thickness of the sample is often assumed to be infinite, in this way, the surface wave speed is directly linked to the sample's shear elasticity. However for many applications this assumption is not true. In this work, we study experimentally the Rayleigh-Lamb modes in soft solids of finite thickness to explore the optimal conditions for SWE. Experiments were carried out in three tissue mimicking phantoms of different thicknesses (10 mm, 20 mm and 60 mm) and same shear elasticity. The surface waves were generated at the surface of the phantom using piston attached to a mechanical vibrator. The central frequency of the excitation was varied between 60 Hz to 160 Hz. One component of the displacement field generated by the piston was measured at the surface and in the bulk of the sample trough a standard speckle tracking technique using a 256 element, 7.5 MHz central frequency linear array and an ultrasound ultrafast electronics. Finally, by measuring the phase velocity at each excitation frequency, velocity dispersion curves were obtained for each phantom. The results show that instead of a Rayleigh wave, zero order symmetric (S0) and antisymmetric (A0) Lamb modes are excited with this type of source. Moreover, in this study we show that due to the near field effects of the source, which are appreciable only in soft solids at low frequencies, both Lamb modes are separable in time and space. We show that while the Ao mode dominates close the source, the S0 mode dominates far away.

Lamb mode selection for accurate wall loss estimation via guided wave tomography

NASA Astrophysics Data System (ADS)

Huthwaite, P.; Ribichini, R.; Lowe, M. J. S.; Cawley, P.

2014-02-01

Guided wave tomography offers a method to accurately quantify wall thickness losses in pipes and vessels caused by corrosion. This is achieved using ultrasonic waves transmitted over distances of approximately 1-2m, which are measured by an array of transducers and then used to reconstruct a map of wall thickness throughout the inspected region. To achieve accurate estimations of remnant wall thickness, it is vital that a suitable Lamb mode is chosen. This paper presents a detailed evaluation of the fundamental modes, S0 and A0, which are of primary interest in guided wave tomography thickness estimates since the higher order modes do not exist at all thicknesses, to compare their performance using both numerical and experimental data while considering a range of challenging phenomena. The sensitivity of A0 to thickness variations was shown to be superior to S0, however, the attenuation from A0 when a liquid loading was present was much higher than S0. A0 was less sensitive to the presence of coatings on the surface of than S0.

Thickness Measurement of Surface Attachment on Plate with Lamb Wave

NASA Astrophysics Data System (ADS)

Ma, Xianglong; Zhang, Yinghong; Wen, Lichao; He, Yehu

2017-12-01

Aiming at the thickness detection of the plate surface attachment, a nondestructive testing method based on the Lamb wave is presented. This method utilizes Lamb wave propagation characteristics of signals in a bi-layer medium to measure the surface attachment plate thickness. Propagation of Lamb wave in bi-layer elastic is modeled and analyzed. The two-dimensional simulation model of electromagnetic ultrasonic plate - scale is established. The simulation is conducted by software COMSOL for simulation analysis under different boiler scale thickness wave form curve. Through this study, the thickness of the attached material can be judged by analyzing the characteristics of the received signal when the thickness of the surface of the plate is measured.

Theoretical investigation of Lamb wave characteristics in AlN/3C-SiC composite membranes

NASA Astrophysics Data System (ADS)

Lin, Chih-Ming; Chen, Yung-Yu; Pisano, Albert P.

2010-11-01

Cubic silicon carbide (3C-SiC) layer can provide advantages of high frequency and high quality factor for Lamb wave devices due to the superior properties of high acoustic velocity and low acoustic loss. In this study, Lamb wave propagation characteristics in composite membranes consisting of a c-axis oriented aluminum nitride (AlN) film and an epitaxial 3C-SiC (100) layer are investigated by theoretical calculation. The lowest symmetric mode Lamb wave propagating along the [011] direction exhibits a phase velocity higher than 10 000 m/s and an electromechanical coupling coefficient above 2% in the AlN/3C-SiC multilayered membranes.

Lamb waves increase sensitivity in nondestructive testing

NASA Technical Reports Server (NTRS)

Di Novi, R.

1967-01-01

Lamb waves improve sensitivity and resolution in the detection of small defects in thin plates and small diameter, thin-walled tubing. This improvement over shear waves applies to both longitudinal and transverse flaws in the specimens.

A Guided Wave Sensor Enabling Simultaneous Wavenumber-Frequency Analysis for Both Lamb and Shear-Horizontal Waves.

PubMed

Ren, Baiyang; Cho, Hwanjeong; Lissenden, Cliff J

2017-03-01

Guided waves in plate-like structures have been widely investigated for structural health monitoring. Lamb waves and shear horizontal (SH) waves, two commonly used types of waves in plates, provide different benefits for the detection of various types of defects and material degradation. However, there are few sensors that can detect both Lamb and SH waves and also resolve their modal content, namely the wavenumber-frequency spectrum. A sensor that can detect both waves is desirable to take full advantage of both types of waves in order to improve sensitivity to different discontinuity geometries. We demonstrate that polyvinylidene difluoride (PVDF) film provides the basis for a multi-element array sensor that detects both Lamb and SH waves and also measures their modal content, i.e., the wavenumber-frequency spectrum.

Lamb wave line sensing for crack detection in a welded stiffener.

PubMed

An, Yun-Kyu; Kim, Jae Hong; Yim, Hong Jae

2014-07-18

This paper proposes a novel Lamb wave line sensing technique for crack detection in a welded stiffener. The proposed technique overcomes one of the biggest technical challenges of Lamb wave crack detection for real structure applications: crack-induced Lamb waves are often mixed with multiple reflections from complex waveguides. In particular, crack detection in a welded joint, one of the structural hot spots due to stress concentration, is accompanied by reflections from the welded joint as well as a crack. Extracting and highlighting crack-induced Lamb wave modes from Lamb wave responses measured at multi-spatial points along a single line can be accomplished through a frequency-wavenumber domain analysis. The advantages of the proposed technique enable us not only to enhance the crack detectability in the welded joint but also to minimize false alarms caused by environmental and operational variations by avoiding the direct comparison with the baseline data previously accumulated from the pristine condition of a target structure. The proposed technique is experimentally and numerically validated in vertically stiffened metallic structures, revealing that it successfully identifies and localizes subsurface cracks, regardless of the coexistence with the vertical stiffener.

Detecting Lamb waves with broad-band acousto-ultrasonic signals in composite structures

NASA Technical Reports Server (NTRS)

Kautz, Harold E.

1992-01-01

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave dispersion curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMC, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Lamb wave characterization of the effects of long-term thermal-mechanical aging on composite stiffness

NASA Technical Reports Server (NTRS)

Seale, M. D.; Madaras, E. I.

1999-01-01

Lamb waves offer a promising method of evaluating damage in composite materials. The Lamb wave velocity is directly related to the material parameters, so an effective tool exists to monitor damage in composites by measuring the velocity of these waves. The Lamb Wave Imager (LWI) uses a pulse/receive technique that excites an antisymmetric Lamb mode and measures the time-of-flight over a wide frequency range. Given the material density and plate thickness, the bending and out-of-plane shear stiffnesses are calculated from a reconstruction of the dispersion curve. In this study, the time-of-flight as well as the elastic stiffnesses D11, D22, A44, and A55 for composite samples which have undergone combined thermal and mechanical aging are obtained. The samples examined include a baseline specimen with 0 cycles, specimens which have been aged 2350 and 3530 cycles at high strain levels, and one specimen aged 3530 cycles at low strain levels.

Lamb wave characterization of the effects of long-term thermal-mechanical aging on composite stiffness.

PubMed

Seale, M D; Madaras, E I

1999-09-01

Lamb waves offer a promising method of evaluating damage in composite materials. The Lamb wave velocity is directly related to the material parameters, so an effective tool exists to monitor damage in composites by measuring the velocity of these waves. The Lamb Wave Imager (LWI) uses a pulse/receive technique that excites an antisymmetric Lamb mode and measures the time-of-flight over a wide frequency range. Given the material density and plate thickness, the bending and out-of-plane shear stiffnesses are calculated from a reconstruction of the dispersion curve. In this study, the time-of-flight as well as the elastic stiffnesses D11, D22, A44, and A55 for composite samples which have undergone combined thermal and mechanical aging are obtained. The samples examined include a baseline specimen with 0 cycles, specimens which have been aged 2350 and 3530 cycles at high strain levels, and one specimen aged 3530 cycles at low strain levels.

A guided wave sensor enabling simultaneous wavenumber-frequency analysis for both lamb and shear-horizontal waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Baiyang; Cho, Hwanjeong; Lissenden, Cliff J.

Guided waves in plate-like structures have been widely investigated for structural health monitoring. Lamb waves and shear horizontal (SH) waves, two commonly used types of waves in plates, provide different benefits for the detection of various types of defects and material degradation. However, there are few sensors that can detect both Lamb and SH waves and also resolve their modal content, namely the wavenumber-frequency spectrum. A sensor that can detect both waves is desirable to take full advantage of both types of waves in order to improve sensitivity to different discontinuity geometries. As a result, we demonstrate that polyvinylidene difluoridemore » (PVDF) film provides the basis for a multi-element array sensor that detects both Lamb and SH waves and also measures their modal content, i.e., the wavenumber-frequency spectrum.« less

A guided wave sensor enabling simultaneous wavenumber-frequency analysis for both lamb and shear-horizontal waves

DOE PAGES

Ren, Baiyang; Cho, Hwanjeong; Lissenden, Cliff J.

2017-03-01

Guided waves in plate-like structures have been widely investigated for structural health monitoring. Lamb waves and shear horizontal (SH) waves, two commonly used types of waves in plates, provide different benefits for the detection of various types of defects and material degradation. However, there are few sensors that can detect both Lamb and SH waves and also resolve their modal content, namely the wavenumber-frequency spectrum. A sensor that can detect both waves is desirable to take full advantage of both types of waves in order to improve sensitivity to different discontinuity geometries. As a result, we demonstrate that polyvinylidene difluoridemore » (PVDF) film provides the basis for a multi-element array sensor that detects both Lamb and SH waves and also measures their modal content, i.e., the wavenumber-frequency spectrum.« less

Delamination detection in smart composite beams using Lamb waves

NASA Astrophysics Data System (ADS)

Ip, Kim-Ho; Mai, Yiu-Wing

2004-06-01

This paper presents a feasibility study on using Lamb waves to detect and locate through-width delamination in fiber-reinforced plastic beams. An active diagnostic system is proposed for clamped-free specimens. It consists of a piezoelectric patch and an accelerometer both mounted near the support. Such a system can locate damage in an absolute sense, that is, a priori knowledge on the response from pristine specimens is not required. The fundamental anti-symmetric Lamb wave mode is chosen as the diagnostic wave. It is generated by applying a voltage in the form of sinusoidal bursts to the piezoelectric patch. The proposed system was applied to locate delaminations in some fabricated Kevlar/epoxy beam specimens. With an appropriate actuating frequency, distortions of waveforms due to boundary reflections can be reduced. Based on their arrival times and the known propagating speed of Lamb waves, the delaminations can be located. The errors associated with the predicted damage positions range from 4.5% to 8.5%.

Crack Detection with Lamb Wave Wavenumber Analysis

NASA Technical Reports Server (NTRS)

Tian, Zhenhua; Leckey, Cara; Rogge, Matt; Yu, Lingyu

2013-01-01

In this work, we present our study of Lamb wave crack detection using wavenumber analysis. The aim is to demonstrate the application of wavenumber analysis to 3D Lamb wave data to enable damage detection. The 3D wavefields (including vx, vy and vz components) in time-space domain contain a wealth of information regarding the propagating waves in a damaged plate. For crack detection, three wavenumber analysis techniques are used: (i) two dimensional Fourier transform (2D-FT) which can transform the time-space wavefield into frequency-wavenumber representation while losing the spatial information; (ii) short space 2D-FT which can obtain the frequency-wavenumber spectra at various spatial locations, resulting in a space-frequency-wavenumber representation; (iii) local wavenumber analysis which can provide the distribution of the effective wavenumbers at different locations. All of these concepts are demonstrated through a numerical simulation example of an aluminum plate with a crack. The 3D elastodynamic finite integration technique (EFIT) was used to obtain the 3D wavefields, of which the vz (out-of-plane) wave component is compared with the experimental measurement obtained from a scanning laser Doppler vibrometer (SLDV) for verification purposes. The experimental and simulated results are found to be in close agreement. The application of wavenumber analysis on 3D EFIT simulation data shows the effectiveness of the analysis for crack detection. Keywords: : Lamb wave, crack detection, wavenumber analysis, EFIT modeling

A micromachined thermally compensated thin film Lamb wave resonator for frequency control and sensing applications

NASA Astrophysics Data System (ADS)

Wingqvist, G.; Arapan, L.; Yantchev, V.; Katardjiev, I.

2009-03-01

Micromachined thin film plate acoustic wave resonators (FPARs) utilizing the lowest order symmetric Lamb wave (S0) propagating in highly textured 2 µm thick aluminium nitride (AlN) membranes have been successfully demonstrated (Yantchev and Katardjiev 2007 IEEE Trans. Ultrason. Ferroelectr. Freq. Control 54 87-95). The proposed devices have a SAW-based design and exhibit Q factors of up to 3000 at a frequency around 900 MHz as well as design flexibility with respect to the required motional resistance. However, a notable drawback of the proposed devices is the non-zero temperature coefficient of frequency (TCF) which lies in the range -20 ppm K-1 to -25 ppm K-1. Thus, despite the promising features demonstrated, further device optimization is required. In this work temperature compensation of thin AlN film Lamb wave resonators is studied and experimentally demonstrated. Temperature compensation while retaining at the same time the device electromechanical coupling is experimentally demonstrated. The zero TCF Lamb wave resonators are fabricated onto composite AlN/SiO2 membranes. Q factors of around 1400 have been measured at a frequency of around 755 MHz. Finally, the impact of technological issues on the device performance is discussed in view of improving the device performance.

Re-radiation of acoustic waves from the A0 wave on a submerged elastic shell

NASA Astrophysics Data System (ADS)

Ahyi, A. C.; Cao, Hui; Raju, P. K.; Überall, Herbert

2005-07-01

We consider evacuated thin semi-infinite shells immersed in a fluid, which may be either of cylindrical shape with a hemispherical shell endcap, or formed two-dimensionally by semi-infinite parallel plates joined together by a semi-cylinder. The connected shell portions are joined in a manner to satisfy continuity but with a discontinuous radius of curvature. Acoustic waves are considered incident along the axis of symmetry (say the z axis) onto the curved portion of the shell, where they, at the critical angle of coincidence, generate Lamb and Stoneley-type waves in the shell. Computations were carried out using a code developed by Cao et al. [Chinese J. Acoust. 14, 317 (1995)] and was used in order to computationally visualize the waves in the fluid that have been re-radiated by the shell waves a the critical angle. The frequency range was below that of the lowest Lamb wave, and only the A0 wave (and partly the S0 wave) was observed to re-radiate into the fluid under our assumptions. The results will be compared to experimental results in which the re-radiated waves are optically visualized by the Schardin-Cranz schlieren method. .

Quantitative damage imaging using Lamb wave diffraction tomography

NASA Astrophysics Data System (ADS)

Zhang, Hai-Yan; Ruan, Min; Zhu, Wen-Fa; Chai, Xiao-Dong

2016-12-01

In this paper, we investigate the diffraction tomography for quantitative imaging damages of partly through-thickness holes with various shapes in isotropic plates by using converted and non-converted scattered Lamb waves generated numerically. Finite element simulations are carried out to provide the scattered wave data. The validity of the finite element model is confirmed by the comparison of scattering directivity pattern (SDP) of circle blind hole damage between the finite element simulations and the analytical results. The imaging method is based on a theoretical relation between the one-dimensional (1D) Fourier transform of the scattered projection and two-dimensional (2D) spatial Fourier transform of the scattering object. A quantitative image of the damage is obtained by carrying out the 2D inverse Fourier transform of the scattering object. The proposed approach employs a circle transducer network containing forward and backward projections, which lead to so-called transmission mode (TMDT) and reflection mode diffraction tomography (RMDT), respectively. The reconstructed results of the two projections for a non-converted S0 scattered mode are investigated to illuminate the influence of the scattering field data. The results show that Lamb wave diffraction tomography using the combination of TMDT and RMDT improves the imaging effect compared with by using only the TMDT or RMDT. The scattered data of the converted A0 mode are also used to assess the performance of the diffraction tomography method. It is found that the circle and elliptical shaped damages can still be reasonably identified from the reconstructed images while the reconstructed results of other complex shaped damages like crisscross rectangles and racecourse are relatively poor. Project supported by the National Natural Science Foundation of China (Grant Nos. 11474195, 11274226, 11674214, and 51478258).

Rectification of Lamb wave propagation in thin plates with piezo-dielectric periodic structures

NASA Astrophysics Data System (ADS)

Iwasaki, Yuhei; Tsuruta, Kenji; Ishikawa, Atsushi

2016-07-01

Based on a heterostructured plate consisting of piezoelectric-ceramic/epoxy-resin composites with different periodicities, we design a novel acoustic diode for the symmetrical/asymmetrical (S/A) mode of Lamb wave at audible ranges. The acoustic diode is constructed with two parts, i.e., the mode conversion part and the mode selection part, and the mode conversion mechanism at the interface is applied to the mode hybridization from S to S+A and for the mode conversion from A to S. The phonon band structures for each part are calculated and optimized so that the mode selection is realized for a specific mode at the junction. Finite-element simulations prove that the proposed acoustic diode achieves efficient rectification at audio frequency ranges for both S and A mode incidences of the Lamb wave.

Damage detection in composite materials using Lamb wave methods

NASA Astrophysics Data System (ADS)

Kessler, Seth S.; Spearing, S. Mark; Soutis, Constantinos

2002-04-01

Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents part of an experimental and analytical survey of candidate methods for in situ damage detection of composite materials. Experimental results are presented for the application of Lamb wave techniques to quasi-isotropic graphite/epoxy test specimens containing representative damage modes, including delamination, transverse ply cracks and through-holes. Linear wave scans were performed on narrow laminated specimens and sandwich beams with various cores by monitoring the transmitted waves with piezoceramic sensors. Optimal actuator and sensor configurations were devised through experimentation, and various types of driving signal were explored. These experiments provided a procedure capable of easily and accurately determining the time of flight of a Lamb wave pulse between an actuator and sensor. Lamb wave techniques provide more information about damage presence and severity than previously tested methods (frequency response techniques), and provide the possibility of determining damage location due to their local response nature. These methods may prove suitable for structural health monitoring applications since they travel long distances and can be applied with conformable piezoelectric actuators and sensors that require little power.

Lamb-Wave-Based Tomographic Imaging Techniques for Hole-Edge Corrosion Monitoring in Plate Structures

PubMed Central

Wang, Dengjiang; Zhang, Weifang; Wang, Xiangyu; Sun, Bo

2016-01-01

This study presents a novel monitoring method for hole-edge corrosion damage in plate structures based on Lamb wave tomographic imaging techniques. An experimental procedure with a cross-hole layout using 16 piezoelectric transducers (PZTs) was designed. The A0 mode of the Lamb wave was selected, which is sensitive to thickness-loss damage. The iterative algebraic reconstruction technique (ART) method was used to locate and quantify the corrosion damage at the edge of the hole. Hydrofluoric acid with a concentration of 20% was used to corrode the specimen artificially. To estimate the effectiveness of the proposed method, the real corrosion damage was compared with the predicted corrosion damage based on the tomographic method. The results show that the Lamb-wave-based tomographic method can be used to monitor the hole-edge corrosion damage accurately. PMID:28774041

Finite Element Analysis of Lamb Waves Acting within a Thin Aluminum Plate

DTIC Science & Technology

2007-09-01

signal to avoid time aliasing % LambWaveMode % lamb wave mode to simulate; use proper phase velocity curve % thickness % thickness of...analysis of the simulated signal response data demonstrated that elevated temperatures delay wave propagation, although the delays are minimal at the...Echo Techniques Ultrasonic NDE techniques are based on the propagation and reflection of elastic waves , with the assumption that damage in the

Multi reflection of Lamb wave emission in an acoustic waveguide sensor.

PubMed

Schmitt, Martin; Olfert, Sergei; Rautenberg, Jens; Lindner, Gerhard; Henning, Bernd; Reindl, Leonhard Michael

2013-02-27

Recently, an acoustic waveguide sensor based on multiple mode conversion of surface acoustic waves at the solid-liquid interfaces has been introduced for the concentration measurement of binary and ternary mixtures, liquid level sensing, investigation of spatial inhomogenities or bubble detection. In this contribution the sound wave propagation within this acoustic waveguide sensor is visualized by Schlieren imaging for continuous and burst operation the first time. In the acoustic waveguide the antisymmetrical zero order Lamb wave mode is excited by a single phase transducer of 1 MHz on thin glass plates of 1 mm thickness. By contact to the investigated liquid Lamb waves propagating on the first plate emit pressure waves into the adjacent liquid, which excites Lamb waves on the second plate, what again causes pressure waves traveling inside the liquid back to the first plate and so on. The Schlieren images prove this multi reflection within the acoustic waveguide, which confirms former considerations and calculations based on the receiver signal. With this knowledge the sensor concepts with the acoustic waveguide sensor can be interpreted in a better manner.

Multi Reflection of Lamb Wave Emission in an Acoustic Waveguide Sensor

PubMed Central

Schmitt, Martin; Olfert, Sergei; Rautenberg, Jens; Lindner, Gerhard; Henning, Bernd; Reindl, Leonhard Michael

2013-01-01

Recently, an acoustic waveguide sensor based on multiple mode conversion of surface acoustic waves at the solid—liquid interfaces has been introduced for the concentration measurement of binary and ternary mixtures, liquid level sensing, investigation of spatial inhomogenities or bubble detection. In this contribution the sound wave propagation within this acoustic waveguide sensor is visualized by Schlieren imaging for continuous and burst operation the first time. In the acoustic waveguide the antisymmetrical zero order Lamb wave mode is excited by a single phase transducer of 1 MHz on thin glass plates of 1 mm thickness. By contact to the investigated liquid Lamb waves propagating on the first plate emit pressure waves into the adjacent liquid, which excites Lamb waves on the second plate, what again causes pressure waves traveling inside the liquid back to the first plate and so on. The Schlieren images prove this multi reflection within the acoustic waveguide, which confirms former considerations and calculations based on the receiver signal. With this knowledge the sensor concepts with the acoustic waveguide sensor can be interpreted in a better manner. PMID:23447010

Adhesive joint evaluation by ultrasonic interface and lamb waves

NASA Technical Reports Server (NTRS)

Rokhlin, S. I.

1986-01-01

Some results on the application of interface and Lamb waves for the study of curing of thin adhesive layers were summarized. In the case of thick substrates (thickness much more than the wave length) the interface waves can be used. In this case the experimental data can be inverted and the shear modulus of the adhesive film may be explicitly found based on the measured interface wave velocity. It is shown that interface waves can be used for the study of curing of structural adhesives as a function of different temperatures and other experimental conditions. The kinetics of curing was studied. In the case of thin substrates the wave phenomena are much more complicated. It is shown that for successful measurements proper selection of experimental conditions is very important. This can be done based on theoretical estimations. For correctly selected experimental conditions the Lamb waves may be a sensitive probe of adhesive bond quality and may be used or cure monitoring.

The propagation of Lamb waves in multilayered plates: phase-velocity measurement

NASA Astrophysics Data System (ADS)

Grondel, Sébastien; Assaad, Jamal; Delebarre, Christophe; Blanquet, Pierrick; Moulin, Emmanuel

1999-05-01

Owing to the dispersive nature and complexity of the Lamb waves generated in a composite plate, the measurement of the phase velocities by using classical methods is complicated. This paper describes a measurement method based upon the spectrum-analysis technique, which allows one to overcome these problems. The technique consists of using the fast Fourier transform to compute the spatial power-density spectrum. Additionally, weighted functions are used to increase the probability of detecting the various propagation modes. Experimental Lamb-wave dispersion curves of multilayered plates are successfully compared with the analytical ones. This technique is expected to be a useful way to design composite parts integrating ultrasonic transducers in the field of health monitoring. Indeed, Lamb waves and particularly their velocities are very sensitive to defects.

High-frequency Lamb wave device composed of MEMS structure using LiNbO3 thin film and air gap.

PubMed

Kadota, Michio; Ogami, Takashi; Yamamoto, Kansho; Tochishita, Hikari; Negoro, Yasuhiro

2010-11-01

High-frequency devices operating at 3 GHz or higher are required, for instance, for future 4th generation mobile phone systems in Japan. Using a substrate with a high acoustic velocity is one method to realize a high-frequency acoustic or elastic device. A Lamb wave has a high velocity when the substrate thickness is thin. To realize a high-frequency device operating at 3 GHz or higher using a Lamb wave, a very thin (less than 0.5 μm thick) single-crystal plate must be used. It is difficult to fabricate such a very thin single crystal plate. The authors have attempted to use a c-axis orientated epitaxial LiNbO(3) thin film deposited by a chemical vapor deposition system (CVD) instead of using a thin LiNbO(3) single crystal plate. Lamb wave resonators composed of a interdigital transducer (IDT)/the LiNbO(3) film/air gap/base substrate structure like micro-electromechanical system (MEMS) transducers were fabricated. These resonators have shown a high frequency of 4.5 and 6.3 GHz, which correspond to very high acoustic velocities of 14,000 and 12,500 m/s, respectively, have excellent characteristics such as a ratio of resonant and antiresonant impedance of 52 and 38 dB and a wide band of 7.2% and 3.7%, respectively, and do not have spurious responses caused by the 0th modes of shear horizontal (SH(0)) and symmetric (S(0)) modes.

Legendre polynomial modeling for vibrations of guided Lamb waves modes in [001]c, [011]c and [111]c polarized (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (x = 0.29 and 0.33) piezoelectric plates: Physical phenomenon of multiple intertwining of An and Sn modes

NASA Astrophysics Data System (ADS)

Othmani, Cherif; Takali, Farid; Njeh, Anouar

2017-12-01

Guided wave devices have recently become one of the most important applications in the industry because such waves are directly related to applications in sensor technology, chemical sensing, agricultural science, fields of bio-sensing and surface acoustic wave (SAW) devices that are used in electronic filters and signal processing. On that account, this numerical investigation aims to study the propagation behavior of guided Lamb waves in a (1-x)Pb(Mg1/3Nb2/3)O3- x PbTiO3 [PMN- x PT] ( x=0.29 or 0.33) piezoelectric single crystal plate. In fact, the PMN- xPT ( x=0.29 or 0.33) piezoelectric crystals are being polarized along [001]c, [011]c and [111]c of the cubic reference directions so that the macroscopic symmetries are tetragonal 4 mm, orthogonal mm2 and rhombohedral 3 m, respectively. Both open- and short-circuit conditions are considered. Here, the Legendre polynomial method is proposed to solve the guided Lamb waves equations. The validity of the proposed method is illustrated by comparison with the ordinary differential equation (ODE). The convergence of this method is discussed. Consequently, the converged results are obtained with very low truncation order M . This constitutes a major advantage of the present method when compared with the other matrix methods. There is cross-crossings among multiple modes for both symmetric ( Sn) and the anti-symmetric ( An) guided Lamb waves propagation. A displacement field has been illustrated to judge whether Sn and An modes cross with each other. Moreover, electric displacement, stress field and electric potential for the open-circuit case were presented for both S0 and A0 Lamb modes.

Lamb waves in phononic crystal slabs with square or rectangular symmetries

NASA Astrophysics Data System (ADS)

Brunet, Thomas; Vasseur, Jérôme; Bonello, Bernard; Djafari-Rouhani, Bahram; Hladky-Hennion, Anne-Christine

2008-08-01

We report on both numerical and experimental results showing the occurrence of band gaps for Lamb waves propagating in phononic crystal plates. The structures are made of centered rectangular and square arrays of holes drilled in a silicon plate. A supercell plane wave expansion method is used to calculate the band structures and to predict the position and the magnitude of the gaps. The band structures of phononic crystal slabs are then measured using a laser ultrasonic technique. Lamb waves in the megahertz range and with wave vectors ranging over more than the first two reduced Brillouin zones are investigated.

A New Electromagnetic Acoustic Transducer Design for Generating and Receiving S0 Lamb Waves in Ferromagnetic Steel Plate

PubMed Central

He, Jianpeng; Dixon, Steve; Hill, Samuel; Xu, Ke

2017-01-01

Electromagnetic acoustic transducers (EMATs) are non-contact, ultrasonic transducers that are usually kept within 5 mm from the sample surface to obtain a sufficient signal-to-noise ratio (SNR). One important issue associated with operation on a ferromagnetic plate is that the strong attraction force from the magnet can affect measurements and make scanning difficult. This paper investigates a method to generate fundamental, symmetric Lamb waves on a ferromagnetic plate. A coil-only, low-weight, generation EMAT is designed and investigated, operating at lift-offs of over 5 mm. Another design of an EMAT is investigated using a rectangular magnet with a much higher lift-off than the coil, of up to 19 mm. This results in a much lower force between the EMAT and sample, making scanning the EMAT much easier. PMID:28471377

Lamb wave scattering by a surface-breaking crack in a plate

NASA Technical Reports Server (NTRS)

Datta, S. K.; Al-Nassar, Y.; Shah, A. H.

1991-01-01

An NDE method based on finite-element representation and modal expansion has been developed for solving the scattering of Lamb waves in an elastic plate waveguide. This method is very powerful for handling discontinuities of arbitrary shape, weldments of different orientations, canted cracks, etc. The advantage of the method is that it can be used to study the scattering of Lamb waves in anisotropic elastic plates and in multilayered plates as well.

Damage assessment in composite laminates via broadband Lamb wave.

PubMed

Gao, Fei; Zeng, Liang; Lin, Jing; Shao, Yongsheng

2018-05-01

Time of flight (ToF) based method for damage detection using Lamb waves is widely used. However, due to the energy dissipation of Lamb waves and the non-ignorable size of damage in composite structure, the performance of damage detection is restricted. The objective of this research is to establish an improved method to locate and assess damages in composite structure. To choose appropriate excitation parameters, the propagation characters of Lamb waves in quasi-isotropic composite laminates are firstly studied and the broadband excitation is designed. Subsequently, the pulse compression technique is adopted for energy concentration and high-accuracy distance estimation. On this basis, the gravity center of intersections of path loci is employed for damage localization and the convex envelop of identified damage edge points is taken for damage contour estimation. As a result, both damage location and size can be evaluated, thereby providing the information for quantitative damage detection. The experiment consisting of five different sizes of damage is carried for method verification and the identified results show the efficiency of the proposed method. Copyright © 2018 Elsevier B.V. All rights reserved.

Real-Time Characterization of Materials Degradation Using Leaky Lamb Wave

NASA Technical Reports Server (NTRS)

Shiuh, S.; Bar-Cohen, Y.

1997-01-01

Leaky Lamb wave (LLW) propagation in composite materials has been studied extensively since it was first observed in 1982. The wave is induced using a pitch-catch arrangement and the plate wave modes are detected by searching minima in the reflected spectra.

Fatigue disbonding analysis of wide composite panels by means of Lamb waves

NASA Astrophysics Data System (ADS)

Michalcová, Lenka; Rechcígel, Lukáš; Bělský, Petr; Kucharský, Pavel

2018-03-01

Guided wave-based monitoring of composite structures plays an important role in the area of structural health monitoring (SHM) of aerospace structures. Adhesively bonded joints have not yet fulfilled current airworthiness requirements; hence, assemblies of carbon fibre-reinforced parts still require mechanical fasteners, and a verified SHM method with reliable disbonding/delamination detection and propagation assessment is needed. This study investigated the disbonding/delamination propagation in adhesively bonded panels using Lamb waves during fatigue tests. Analyses focused on the proper frequency and mode selection, sensor placement and selection of parameter sensitive to the growth of disbonding areas. Piezoelectric transducers placed across the bonded area were used as actuators and sensors. Lamb wave propagation was investigated considering the actual shape of the crack front and the mode of the crack propagation. The actual cracked area was determined by ultrasonic A-scans. A correlation between the crack propagation rate and the A0 mode velocity was found.

Experimental and theoretical study of Rayleigh-Lamb wave propagation

NASA Technical Reports Server (NTRS)

Rogers, Wayne P.; Datta, Subhendu K.; Ju, T. H.

1990-01-01

Many space structures, such as the Space Station Freedom, contain critical thin-walled components. The structural integrity of thin-walled plates and shells can be monitored effectively using acoustic emission and ultrasonic testing in the Rayleigh-Lamb wave frequency range. A new PVDF piezoelectric sensor has been developed that is well suited to remote, inservice nondestructive evaluation of space structures. In the present study the new sensor was used to investigate Rayleigh-Lamb wave propagation in a plate. The experimental apparatus consisted of a glass plate (2.3 m x 25.4 mm x 5.6 mm) with PVDF sensor (3 mm diam.) mounted at various positions along its length. A steel ball impact served as a simulated acoustic emission source, producing surface waves, shear waves and longitudinal waves with dominant frequencies between 1 kHz and 200 kHz. The experimental time domain wave-forms were compared with theoretical predictions of the wave propagation in the plate. The model uses an analytical solution for the Green's function and the measured response at a single position to predict response at any other position in the plate. Close agreement was found between the experimental and theoretical results.

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Y., E-mail: thuzhangyu@foxmail.com; Huang, S. L., E-mail: huangsling@tsinghua.edu.cn; Wang, S.

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency formore » all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert–Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of <1% and thus can act as a universal time-of-flight extraction method for narrowband Lamb wave detection signals.« less

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals.

PubMed

Zhang, Y; Huang, S L; Wang, S; Zhao, W

2016-05-01

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency for all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert-Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of <1% and thus can act as a universal time-of-flight extraction method for narrowband Lamb wave detection signals.

Low-cost ultrasonic lamb-wave transducer

NASA Technical Reports Server (NTRS)

Kammerer, C. C.

1978-01-01

Transducer propagates Lamb wave through thin aluminum sheet material. Model includes two elements that measure effects of damping and loading which, in turn, are indirectly equated to bond integrity. Transducer has been used to evaluate bond integrity of aluminum facing adhesively bonded to aluminum facing. Because of versatility, it is now possible to inspect many objects of different configurations that could not be reached with earlier transducers.

Influence of crack opening and incident wave angle on second harmonic generation of Lamb waves

NASA Astrophysics Data System (ADS)

Yang, Yi; Ng, Ching-Tai; Kotousov, Andrei

2018-05-01

Techniques utilising second harmonic generation (SHG) have proven their great potential in detecting contact-type damage. However, the gap between the practical applications and laboratory studies is still quite large. The current work is aimed to bridge this gap by investigating the effects of the applied load and incident wave angle on the detectability of fatigue cracks at various lengths. Both effects are critical for practical implementations of these techniques. The present experimental study supported by three-dimensional (3D) finite element (FE) modelling has demonstrated that the applied load, which changes the crack opening and, subsequently, the contact nonlinearity, significantly affects the amplitude of the second harmonic generated by the fundamental symmetric mode (S0) of Lamb wave. This amplitude is also dependent on the length of the fatigue crack as well as the incident wave angle. The experimental and FE results correlate well, so the modelling approach can be implemented for practical design of damage monitoring systems as well as for the evaluation of the severity of the fatigue cracks.

Improved ultrasonic TV images achieved by use of Lamb-wave orientation technique

NASA Technical Reports Server (NTRS)

Berger, H.

1967-01-01

Lamb-wave sample orientation technique minimizes the interference from standing waves in continuous wave ultrasonic television imaging techniques used with thin metallic samples. The sample under investigation is oriented such that the wave incident upon it is not normal, but slightly angled.

ANALYTICAL SOLUTION FOR WAVES IN PLANETS WITH ATMOSPHERIC SUPERROTATION. II. LAMB, SURFACE, AND CENTRIFUGAL WAVES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peralta, J.; López-Valverde, M. A.; Imamura, T.

2014-07-01

This paper is the second in a two-part study devoted to developing tools for a systematic classification of the wide variety of atmospheric waves expected on slowly rotating planets with atmospheric superrotation. Starting with the primitive equations for a cyclostrophic regime, we have deduced the analytical solution for the possible waves, simultaneously including the effect of the metric terms for the centrifugal force and the meridional shear of the background wind. In those cases where the conditions for the method of the multiple scales in height are met, these wave solutions are also valid when vertical shear of the backgroundmore » wind is present. A total of six types of waves have been found and their properties were characterized in terms of the corresponding dispersion relations and wave structures. In this second part, we study the waves' solutions when several atmospheric approximations are applied: Lamb, surface, and centrifugal waves. Lamb and surface waves are found to be quite similar to those in a geostrophic regime. By contrast, centrifugal waves turn out to be a special case of Rossby waves that arise in atmospheres in cyclostrophic balance. Finally, we use our results to identify the nature of the waves behind atmospheric periodicities found in polar and lower latitudes of Venus's atmosphere.« less

Measurement of viscoelastic properties of in vivo swine myocardium using Lamb Wave Dispersion Ultrasound Vibrometry (LDUV)

PubMed Central

Urban, Matthew W.; Pislaru, Cristina; Nenadic, Ivan Z.; Kinnick, Randall R.; Greenleaf, James F.

2012-01-01

Viscoelastic properties of the myocardium are important for normal cardiac function and may be altered by disease. Thus, quantification of these properties may aid with evaluation of the health of the heart. Lamb Wave Dispersion Ultrasound Vibrometry (LDUV) is a shear wave-based method that uses wave velocity dispersion to measure the underlying viscoelastic material properties of soft tissue with plate-like geometries. We tested this method in eight pigs in an open-chest preparation. A mechanical actuator was used to create harmonic, propagating mechanical waves in the myocardial wall. The motion was tracked using a high frame rate acquisition sequence, typically 2500 Hz. The velocities of wave propagation were measured over the 50–400 Hz frequency range in 50 Hz increments. Data were acquired over several cardiac cycles. Dispersion curves were fit with a viscoelastic, anti-symmetric Lamb wave model to obtain estimates of the shear elasticity, μ1, and viscosity, μ2 as defined by the Kelvin-Voigt rheological model. The sensitivity of the Lamb wave model was also studied using simulated data. We demonstrated that wave velocity measurements and Lamb wave theory allow one to estimate the variation of viscoelastic moduli of the myocardial walls in vivo throughout the course of the cardiac cycle. PMID:23060325

Lamb-type waves generated by a cylindrical bubble oscillating between two planar elastic walls

PubMed Central

Mekki-Berrada, F.; Thibault, P.; Marmottant, P.

2016-01-01

The volume oscillation of a cylindrical bubble in a microfluidic channel with planar elastic walls is studied. Analytical solutions are found for the bulk scattered wave propagating in the fluid gap and the surface waves of Lamb-type propagating at the fluid–solid interfaces. This type of surface wave has not yet been described theoretically. A dispersion equation for the Lamb-type waves is derived, which allows one to evaluate the wave speed for different values of the channel height h. It is shown that for h<λt, where λt is the wavelength of the transverse wave in the walls, the speed of the Lamb-type waves decreases with decreasing h, while for h on the order of or greater than λt, their speed tends to the Scholte wave speed. The solutions for the wave fields in the elastic walls and in the fluid are derived using the Hankel transforms. Numerical simulations are carried out to study the effect of the surface waves on the dynamics of a bubble confined between two elastic walls. It is shown that its resonance frequency can be up to 50% higher than the resonance frequency of a similar bubble confined between two rigid walls. PMID:27274695

Lamb wave dispersion and anisotropy profiling of composite plates via non-contact air-coupled and laser ultrasound

NASA Astrophysics Data System (ADS)

Harb, M. S.; Yuan, F. G.

2015-03-01

Conventional ultrasound inspection has been a standard non-destructive testing method for providing an in-service evaluation and noninvasive means of probing the interior of a structure. In particular, measurement of the propagation characteristics of Lamb waves allows inspection of plates that are typical components in aerospace industry. A rapid, complete non-contact hybrid approach for excitation and detection of Lamb waves is presented and applied for non-destructive evaluation of composites. An air-coupled transducer (ACT) excites ultrasonic waves on the surface of a composite plate, generating different propagating Lamb wave modes and a laser Doppler vibrometer (LDV) is used to measure the out-of-plane velocity of the plate. This technology, based on direct waveform imaging, focuses on measuring dispersive curves for A0 mode in a composite laminate and its anisotropy. A two-dimensional fast Fourier transform (2D-FFT) is applied to out-of-plane velocity data captured experimentally using LDV to go from the time-spatial domain to frequency-wavenumber domain. The result is a 2D array of amplitudes at discrete frequencies and wavenumbers for A0 mode in a given propagation direction along the composite. The peak values of the curve are then used to construct frequency wavenumber and phase velocity dispersion curves, which are also obtained directly using Snell's law and the incident angle of the excited ultrasonic waves. A high resolution and strong correlation between numerical and experimental results are observed for dispersive curves with Snell's law method in comparison to 2D-FFT method. Dispersion curves as well as velocity curves for the composite plate along different directions of wave propagation are measured. The visual read-out of the dispersion curves at different propagation directions as well as the phase velocity curves provide profiling and measurements of the composite anisotropy. The results proved a high sensitivity of the air-coupled and laser

Improving the resolution for Lamb wave testing via a smoothed Capon algorithm

NASA Astrophysics Data System (ADS)

Cao, Xuwei; Zeng, Liang; Lin, Jing; Hua, Jiadong

2018-04-01

Lamb wave testing is promising for damage detection and evaluation in large-area structures. The dispersion of Lamb waves is often unavoidable, restricting testing resolution and making the signal hard to interpret. A smoothed Capon algorithm is proposed in this paper to estimate the accurate path length of each wave packet. In the algorithm, frequency domain whitening is firstly used to obtain the transfer function in the bandwidth of the excitation pulse. Subsequently, wavenumber domain smoothing is employed to reduce the correlation between wave packets. Finally, the path lengths are determined by distance domain searching based on the Capon algorithm. Simulations are applied to optimize the number of smoothing times. Experiments are performed on an aluminum plate consisting of two simulated defects. The results demonstrate that spatial resolution is improved significantly by the proposed algorithm.

Identification of damage in composite structures using Gaussian mixture model-processed Lamb waves

NASA Astrophysics Data System (ADS)

Wang, Qiang; Ma, Shuxian; Yue, Dong

2018-04-01

Composite materials have comprehensively better properties than traditional materials, and therefore have been more and more widely used, especially because of its higher strength-weight ratio. However, the damage of composite structures is usually varied and complicated. In order to ensure the security of these structures, it is necessary to monitor and distinguish the structural damage in a timely manner. Lamb wave-based structural health monitoring (SHM) has been proved to be effective in online structural damage detection and evaluation; furthermore, the characteristic parameters of the multi-mode Lamb wave varies in response to different types of damage in the composite material. This paper studies the damage identification approach for composite structures using the Lamb wave and the Gaussian mixture model (GMM). The algorithm and principle of the GMM, and the parameter estimation, is introduced. Multi-statistical characteristic parameters of the excited Lamb waves are extracted, and the parameter space with reduced dimensions is adopted by principal component analysis (PCA). The damage identification system using the GMM is then established through training. Experiments on a glass fiber-reinforced epoxy composite laminate plate are conducted to verify the feasibility of the proposed approach in terms of damage classification. The experimental results show that different types of damage can be identified according to the value of the likelihood function of the GMM.

Unusual energy properties of leaky backward Lamb waves in a submerged plate.

PubMed

Nedospasov, I A; Mozhaev, V G; Kuznetsova, I E

2017-05-01

It is found that leaky backward Lamb waves, i.e. waves with negative energy-flux velocity, propagating in a plate submerged in a liquid possess extraordinary energy properties distinguishing them from any other type of waves in isotropic media. Namely, the total time-averaged energy flux along the waveguide axis is equal to zero for these waves due to opposite directions of the longitudinal energy fluxes in the adjacent media. This property gives rise to the fundamental question of how to define and calculate correctly the energy velocity in such an unusual case. The procedure of calculation based on incomplete integration of the energy flux density over the plate thickness alone is applied. The derivative of the angular frequency with respect to the wave vector, usually referred to as the group velocity, happens to be close to the energy velocity defined by this mean in that part of the frequency range where the backward mode exists in the free plate. The existence region of the backward mode is formally increased for the submerged plate in comparison to the free plate as a result of the liquid-induced hybridization of propagating and nonpropagating (evanescent) Lamb modes. It is shown that the Rayleigh's principle (i.e. equipartition of total time-averaged kinetic and potential energies for time-harmonic acoustic fields) is violated due to the leakage of Lamb waves, in spite of considering nondissipative media. Copyright © 2017 Elsevier B.V. All rights reserved.

Self-action of propagating and standing Lamb waves in the plates exhibiting hysteretic nonlinearity: Nonlinear zero-group velocity modes.

PubMed

Gusev, Vitalyi E; Lomonosov, Alexey M; Ni, Chenyin; Shen, Zhonghua

2017-09-01

An analytical theory accounting for the influence of hysteretic nonlinearity of micro-inhomogeneous plate material on the Lamb waves near the S 1 zero group velocity point is developed. The theory predicts that the main effect of the hysteretic quadratic nonlinearity consists in the modification of the frequency and the induced absorption of the Lamb modes. The effects of the nonlinear self-action in the propagating and standing Lamb waves are expected to be, respectively, nearly twice and three times stronger than those in the plane propagating acoustic waves. The theory is restricted to the simplest hysteretic nonlinearity, which is influencing only one of the Lamé moduli of the materials. However, possible extensions of the theory to the cases of more general hysteretic nonlinearities are discussed as well as the perspectives of its experimental testing. Applications include nondestructive evaluation of micro-inhomogeneous and cracked plates. Copyright © 2017 Elsevier B.V. All rights reserved.

Load-Differential Imaging for Detection and Localization of Fatigue Cracks Using Lamb Waves (Preprint)

DTIC Science & Technology

2012-03-01

AFRL-RX-WP-TP-2012-0278 LOAD-DIFFERENTIAL IMAGING FOR DETECTION AND LOCALIZATION OF FATIGUE CRACKS USING LAMB WAVES (PREPRINT) X. Chen...OF FATIGUE CRACKS USING LAMB WAVES (PREPRINT) 5a. CONTRACT NUMBER FA8650-09-C-5206 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6...Jan 2012. Preprint journal article to be submitted to NDT & E. This document contains color. 14. ABSTRACT Fatigue cracks are common and

Reflection of Lamb waves obliquely incident on the free edge of a plate.

PubMed

Santhanam, Sridhar; Demirli, Ramazan

2013-01-01

The reflection of obliquely incident symmetric and anti-symmetric Lamb wave modes at the edge of a plate is studied. Both in-plane and Shear-Horizontal (SH) reflected wave modes are spawned by an obliquely incident in-plane Lamb wave mode. Energy reflection coefficients are calculated for the reflected wave modes as a function of frequency and angle of incidence. This is done by using the method of orthogonal mode decomposition and by enforcing traction free conditions at the plate edge using the method of collocation. A PZT sensor network, affixed to an Aluminum plate, is used to experimentally verify the predictions of the analysis. Experimental results provide support for the analytically determined results. Copyright © 2012 Elsevier B.V. All rights reserved.

Selective Excitation of Lamb-Waves for Damage Detection in Composites

NASA Astrophysics Data System (ADS)

Petculescu, G.; Krishnaswamy, S.; Achenbach, J. D.

2006-03-01

Sensors based on periodic arrays of coherent piezoelectric sources (comb design) are used to selectively excite and detect Lamb waves in aluminum and AS4/3601 unidirectional carbon-epoxy plates. 110 μm PVDF film poled in the thickness direction is used as piezoelectric material. An algorithm to eliminate the effect of coupling in amplitude measurements, using individual Lamb modes excited/detected by the same transducer pair, is described. A multiple-impact test showing a decrease in amplitude and group velocity as damage progresses is used as an example.

Lamb wave extraction of dispersion curves in micro/nano-plates using couple stress theories

NASA Astrophysics Data System (ADS)

Ghodrati, Behnam; Yaghootian, Amin; Ghanbar Zadeh, Afshin; Mohammad-Sedighi, Hamid

2018-01-01

In this paper, Lamb wave propagation in a homogeneous and isotropic non-classical micro/nano-plates is investigated. To consider the effect of material microstructure on the wave propagation, three size-dependent models namely indeterminate-, modified- and consistent couple stress theories are used to extract the dispersion equations. In the mentioned theories, a parameter called 'characteristic length' is used to consider the size of material microstructure in the governing equations. To generalize the parametric studies and examine the effect of thickness, propagation wavelength, and characteristic length on the behavior of miniature plate structures, the governing equations are nondimensionalized by defining appropriate dimensionless parameters. Then the dispersion curves for phase and group velocities are plotted in terms of a wide frequency-thickness range to study the lamb waves propagation considering microstructure effects in very high frequencies. According to the illustrated results, it was observed that the couple stress theories in the Cosserat type material predict more rigidity than the classical theory; so that in a plate with constant thickness, by increasing the thickness to characteristic length ratio, the results approach to the classical theory, and by reducing this ratio, wave propagation speed in the plate is significantly increased. In addition, it is demonstrated that for high-frequency Lamb waves, it converges to dispersive Rayleigh wave velocity.

Fast Lamb wave energy shift approach using fully contactless ultrasonic system to characterize concrete structures

NASA Astrophysics Data System (ADS)

Ham, Suyun; Popovics, John S.

2015-03-01

Ultrasonic techniques provide an effective non-destructive evaluation (NDE) method to monitor concrete structures, but the need to perform rapid and accurate structural assessment requires evaluation of hundreds, or even thousands, of measurement datasets. Use of a fully contactless ultrasonic system can save time and labor through rapid implementation, and can enable automated and controlled data acquisition, for example through robotic scanning. Here we present results using a fully contactless ultrasonic system. This paper describes our efforts to develop a contactless ultrasonic guided wave NDE approach to detect and characterize delamination defects in concrete structures. The developed contactless sensors, controlled scanning system, and employed Multi-channel Analysis of Surface Waves (MASW) signal processing scheme are reviewed. Then a guided wave interpretation approach for MASW data is described. The presence of delamination is interpreted by guided plate wave (Lamb wave) behavior, where a shift in excited Lamb mode phase velocity, is monitored. Numerically simulated and experimental ultrasonic data collected from a concrete sample with simulated delamination defects are presented, where the occurrence of delamination is shown to be associated with a mode shift in Lamb wave energy.

Robust laser-based detection of Lamb waves using photo-EMF sensors

NASA Astrophysics Data System (ADS)

Klein, Marvin B.; Bacher, Gerald D.

1998-03-01

Lamb waves are easily generated and detected using laser techniques. It has been shown that both symmetric and antisymmetric modes can be produced, using single-spot and phased array generation. Detection has been demonstrated with Michelson interferometers, but these instruments can not function effectively on rough surfaces. By contrast, the confocal Fabry-Perot interferometer can interrogate rough surfaces, but generally is not practical for operation below 300 kHz. In this paper we will present Lamb wave data on a number of parts using a robust, adaptive receiver based on photo-emf detection. This receiver has useful sensitivity down to at least 100 kHz, can process speckled beams and can be easily configured to measure both out-of-plane and in- plane motion with a single probe beam.

Near field effect on elasticity measurement for cartilage-bone structure using Lamb wave method.

PubMed

Xu, Hao; Chen, Shigao; An, Kai-Nan; Luo, Zong-Ping

2017-10-30

Cartilage elasticity changes with cartilage degeneration. Hence, cartilage elasticity detection might be an alternative to traditional imaging methods for the early diagnosis of osteoarthritis. Based on the wave propagation measurement, Shear wave elastography (SWE) become an emerging non-invasive elasticity detection method. The wave propagation model, which is affected by tissue shapes, is crucial for elasticity estimating in SWE. However, wave propagation model for cartilage was unclear. This study aimed to establish a wave propagation model for the cartilage-bone structure. We fabricated a cartilage-bone structure, and studied the elasticity measurement and wave propagation by experimental and numerical Lamb wave method (LWM). Results indicated the wave propagation model satisfied the lamb wave theory for two-layered structure. Moreover, a near field region, which affects wave speed measurements and whose occurrence can be prevented if the wave frequency is larger than one critical frequency, was observed. Our findings would provide a theoretical foundation for further application of LWM in elasticity measurement of cartilage in vivo. It can help the application of LWM to the diagnosis of osteoarthritis.

Experimental study of the acoustoelastic Lamb wave in thin plates

NASA Astrophysics Data System (ADS)

Pei, Ning; Bond, Leonard J.

2016-02-01

Many factors can cause residual stresses in industry, like rolling, welding and coating. Residual stresses can have both benefits and shortcomings on components, so it is important to find the residual stresses out and enhance its benefits part and get rid of its harmful part. There are many methods for residual stresses detection and ultrasonic method turns out to be a good one for it is nondestructive, relative cheap and portable. The critically refracted longitudinal (LCR) wave is widely used for it is regarded most sensitive to stress and less sensitive to texture which can influence detection results. Ultrasonic methods for residual stresses detection are based on time of flight (TOF) measurement, but because the measurement should reach nanosecond to show stress change, there are many other factors that can influence TOF, like temperature, texture of the components and even the thickness of the couplant. So increasing the TOF's sensitivity to stress is very important. In this paper the relationships between velocity and frequency are studied experimentally[6] for different Lamb modes, under various stress loadings. The result shows that the sensitivity of different modes various a lot, the A1 mode is the most sensitivity, compared to S0, S1 and A0 modes; if the force is added to 100 MPa, the change stress of A1 mode can be as large to 80 m/s, which is about 10 times more sensitive than the traditional bulk wave. This makes it as a good choice for residual stress detection.

Nonlinear Lamb waves for fatigue damage identification in FRP-reinforced steel plates.

PubMed

Wang, Yikuan; Guan, Ruiqi; Lu, Ye

2017-09-01

A nonlinear Lamb-wave-based method for fatigue crack detection in steel plates with and without carbon fibre reinforcement polymer (CFRP) reinforcement is presented in this study. Both numerical simulation and experimental evaluation were performed for Lamb wave propagation and its interaction with a fatigue crack on these two steel plate types. With the generation of the second harmonic, the damage-induced wave nonlinearities were identified by surface-bonded piezoelectric sensors. Numerical simulation revealed that the damage-induced wave component at the second harmonic was slightly affected by the existence of CFRP laminate, although the total wave energy was decreased because of wave leakage into the CFRP laminate. Due to unavoidable nonlinearity from the experimental environments, it was impractical to directly extract the time-of-flight of the second harmonic for locating the crack. To this end, the correlation coefficient of benchmark and signal with damage at double frequency in the time domain was calculated, based on which an imaging method was introduced to locate the fatigue crack in steel plates with and without CFRP laminates. Copyright © 2017 Elsevier B.V. All rights reserved.

Lamb wave dispersion ultrasound vibrometry (LDUV) method for quantifying mechanical properties of viscoelastic solids.

PubMed

Nenadic, Ivan Z; Urban, Matthew W; Mitchell, Scott A; Greenleaf, James F

2011-04-07

Diastolic dysfunction is the inability of the left ventricle to supply sufficient stroke volumes under normal physiological conditions and is often accompanied by stiffening of the left-ventricular myocardium. A noninvasive technique capable of quantifying viscoelasticity of the myocardium would be beneficial in clinical settings. Our group has been investigating the use of shear wave dispersion ultrasound vibrometry (SDUV), a noninvasive ultrasound-based method for quantifying viscoelasticity of soft tissues. The primary motive of this study is the design and testing of viscoelastic materials suitable for validation of the Lamb wave dispersion ultrasound vibrometry (LDUV), an SDUV-based technique for measuring viscoelasticity of tissues with plate-like geometry. We report the results of quantifying viscoelasticity of urethane rubber and gelatin samples using LDUV and an embedded sphere method. The LDUV method was used to excite antisymmetric Lamb waves and measure the dispersion in urethane rubber and gelatin plates. An antisymmetric Lamb wave model was fitted to the wave speed dispersion data to estimate elasticity and viscosity of the materials. A finite element model of a viscoelastic plate submerged in water was used to study the appropriateness of the Lamb wave dispersion equations. An embedded sphere method was used as an independent measurement of the viscoelasticity of the urethane rubber and gelatin. The FEM dispersion data were in excellent agreement with the theoretical predictions. Viscoelasticity of the urethane rubber and gelatin obtained using the LDUV and embedded sphere methods agreed within one standard deviation. LDUV studies on excised porcine myocardium sample were performed to investigate the feasibility of the approach in preparation for open-chest in vivo studies. The results suggest that the LDUV technique can be used to quantify the mechanical properties of soft tissues with a plate-like geometry.

Acoustic Streaming and Microparticle Enrichment within a Microliter Droplet Using a Lamb-Wave Resonator Array

NASA Astrophysics Data System (ADS)

Zhang, Hongxiang; Tang, Zifan; Wang, Zhan; Pan, Shuting; Han, Ziyu; Sun, Chongling; Zhang, Menglun; Duan, Xuexin; Pang, Wei

2018-06-01

We report the nonlinear acoustic streaming effect and the fast manipulation of microparticles by microelectromechanical Lamb-wave resonators in a microliter droplet. The device, consisting of four Lamb-wave resonators on a silicon die, generates cylindrical traveling waves in a liquid and efficiently drives nine horizontal vortices within a 1 -μ l droplet; the performance of the device coincides with the numerical model prediction. Experimentally, the particles are enriched at the stagnation center of the main vortex on the free surface of the droplet in open space without microfluidic channels. In addition, the trajectories of the particles in the droplet can be controlled by the excitation power.

Temperature Compensation of Aluminum Nitride Lamb Wave Resonators Utilizing the Lowest-Order Symmetric Mode

DTIC Science & Technology

2012-12-14

PZT ceramic plate [40]. Since then Lamb wave devices utilizing the lowest-order antisymmetric (A0) mode propagation in ZnO thin plate were widely...Million Pt Platinum PVDF Polyvinylidene Flouride PZT Lead Zirconium Titanate Q Quality Factor R Resistor RIE Reactive Ion Etching Rm Motional...GaAs), silicon carbide (SiC), langasite (LGS), lead zirconium titanate ( PZT ), and polyvinylidene flouride (PVDF). Each piezoelectric material has

Lamb Wave Dispersion Ultrasound Vibrometry (LDUV) Method for Quantifying Mechanical Properties of Viscoelastic Solids

PubMed Central

Nenadic, Ivan Z.; Urban, Matthew W.; Mitchell, Scott A.; Greenleaf, James F.

2011-01-01

Diastolic dysfunction is the inability of the left ventricle to supply sufficient stroke volumes under normal physiological conditions and is often accompanied by stiffening of the left-ventricular myocardium. A noninvasive technique capable of quantifying viscoelasticity of the myocardium would be beneficial in clinical settings. Our group has been investigating the use of Shearwave Dispersion Ultrasound Vibrometry (SDUV), a noninvasive ultrasound based method for quantifying viscoelasticity of soft tissues. The primary motive of this study is the design and testing of viscoelastic materials suitable for validation of the Lamb wave Dispersion Ultrasound Vibrometry (LDUV), an SDUV-based technique for measuring viscoelasticity of tissues with plate-like geometry. We report the results of quantifying viscoelasticity of urethane rubber and gelatin samples using LDUV and an embedded sphere method. The LDUV method was used to excite antisymmetric Lamb waves and measure the dispersion in urethane rubber and gelatin plates. An antisymmetric Lamb wave model was fitted to the wave speed dispersion data to estimate elasticity and viscosity of the materials. A finite element model of a viscoelastic plate submerged in water was used to study the appropriateness of the Lamb wave dispersion equations. An embedded sphere method was used as an independent measurement of the viscoelasticity of the urethane rubber and gelatin. The FEM dispersion data were in excellent agreement with the theoretical predictions. Viscoelasticity of the urethane rubber and gelatin obtained using the LDUV and embedded sphere methods agreed within one standard deviation. LDUV studies on excised porcine myocardium sample were performed to investigate the feasibility of the approach in preparation for open-chest in vivo studies. The results suggest that the LDUV technique can be used to quantify mechanical properties of soft tissues with a plate-like geometry. PMID:21403186

Lamb waves in plates covered by a two-dimensional phononic film

NASA Astrophysics Data System (ADS)

Bonello, Bernard; Charles, Christine; Ganot, François

2007-01-01

The propagation of Lamb waves in silicon plates coated by a very thin two-dimensional phononic film is studied experimentally. The dispersion curves are measured using a laser ultrasonics technique. The data are then compared to the calculated dispersion curves of the uncoated silicon plate. The overall shapes of the lower-order symmetric and antisymmetric Lamb modes are not altered by the thin phononic film, except by the appearing of frequency band gaps at the edges of both the first and the second Brillouin zone. The influence of the filling fraction on the magnitude of the gaps is investigated experimentally.

Lamb Wave Multitouch Ultrasonic Touchscreen.

PubMed

Firouzi, Kamyar; Nikoozadeh, Amin; Carver, Thomas E; Khuri-Yakub, Butrus Pierre T

2016-12-01

Touchscreen sensors are widely used in many devices such as smart phones, tablets, and laptops with diverse applications. We present the design, analysis, and implementation of an ultrasonic touchscreen system that utilizes the interaction of transient Lamb waves with objects in contact with the screen. It attempts to improve on the existing ultrasound technologies, with the potential of addressing some of the weaknesses of the dominant technologies, such as the capacitive or resistive ones. Compared with the existing ultrasonic and acoustic modalities, among other advantages, it provides the capability of detecting several simultaneous touch points and also a more robust performance. The localization algorithm, given the hardware design, can detect several touch points with a very limited number of measurements (one or two). This in turn can significantly reduce the manufacturing cost.

Damage detection in composite panels based on mode-converted Lamb waves sensed using 3D laser scanning vibrometer

NASA Astrophysics Data System (ADS)

Pieczonka, Łukasz; Ambroziński, Łukasz; Staszewski, Wiesław J.; Barnoncel, David; Pérès, Patrick

2017-12-01

This paper introduces damage identification approach based on guided ultrasonic waves and 3D laser Doppler vibrometry. The method is based on the fact that the symmetric and antisymmetric Lamb wave modes differ in amplitude of the in-plane and out-of-plane vibrations. Moreover, the modes differ also in group velocities and normally they are well separated in time. For a given time window both modes can occur simultaneously only close to the wave source or to a defect that leads to mode conversion. By making the comparison between the in-plane and out-of-plane wave vector components the detection of mode conversion is possible, allowing for superior and reliable damage detection. Experimental verification of the proposed damage identification procedure is performed on fuel tank elements of Reusable Launch Vehicles designed for space exploration. Lamb waves are excited using low-profile, surface-bonded piezoceramic transducers and 3D scanning laser Doppler vibrometer is used to characterize the Lamb wave propagation field. The paper presents theoretical background of the proposed damage identification technique as well as experimental arrangements and results.

Bilinear Time-frequency Analysis for Lamb Wave Signal Detected by Electromagnetic Acoustic Transducer

NASA Astrophysics Data System (ADS)

Sun, Wenxiu; Liu, Guoqiang; Xia, Hui; Xia, Zhengwu

2018-03-01

Accurate acquisition of the detection signal travel time plays a very important role in cross-hole tomography. The experimental platform of aluminum plate under the perpendicular magnetic field is established and the bilinear time-frequency analysis methods, Wigner-Ville Distribution (WVD) and the pseudo-Wigner-Ville distribution (PWVD), are applied to analyse the Lamb wave signals detected by electromagnetic acoustic transducer (EMAT). By extracting the same frequency component of the time-frequency spectrum as the excitation frequency, the travel time information can be obtained. In comparison with traditional linear time-frequency analysis method such as short-time Fourier transform (STFT), the bilinear time-frequency analysis method PWVD is more appropriate in extracting travel time and recognizing patterns of Lamb wave.

Impact induced damage assessment by means of Lamb wave image processing

NASA Astrophysics Data System (ADS)

Kudela, Pawel; Radzienski, Maciej; Ostachowicz, Wieslaw

2018-03-01

The aim of this research is an analysis of full wavefield Lamb wave interaction with impact-induced damage at various impact energies in order to find out the limitation of the wavenumber adaptive image filtering method. In other words, the relation between impact energy and damage detectability will be shown. A numerical model based on the time domain spectral element method is used for modeling of Lamb wave propagation and interaction with barely visible impact damage in a carbon-epoxy laminate. Numerical studies are followed by experimental research on the same material with an impact damage induced by various energy and also a Teflon insert simulating delamination. Wavenumber adaptive image filtering and signal processing are used for damage visualization and assessment for both numerical and experimental full wavefield data. It is shown that it is possible to visualize and assess the impact damage location, size and to some extent severity by using the proposed technique.

Scattering of Lamb waves by cracks in a composite graphite fiber-reinforced epoxy plate

NASA Technical Reports Server (NTRS)

Bratton, Robert; Datta, Subhendu K.; Shah, Arvind

1990-01-01

Recent investigations of space construction techniques have explored the used of composite materials in the construction of space stations and platforms. These composites offer superior strength to weight ratio and are thermally stable. For example, a composite material being considered is laminates of graphite fibers in an epoxy matrix. The overall effective elastic constants of such a medium can be calculated from fiber and matrix properties by using an effective modulus theory as shown in Datta, el. al. The investigation of propagation and scattering of elastic waves in composite materials is necessary in order to develop an ability to characterize cracks and predict the reliability of composite structures. The objective of this investigation is the characterization of a surface breaking crack by ultrasonic techniques. In particular, the use of Lamb waves for this purpose is studied here. The Lamb waves travel through the plate, encountering a crack, and scatter. Of interest is the modeling of the scattered wave in terms of the Lamb wave modes. The direct problem of propagation and scattering of Lamb waves by a surface breaking crack has been analyzed. This would permit an experimentalist to characterize the crack by comparing the measured response to the analytical model. The plate is assumed to be infinite in the x and y directions with a constant thickness in the z direction. The top and bottom surfaces are traction free. Solving the governing wave equations and using the stress-free boundary conditions results in the dispersion equation. This equation yields the guided modes in the homogeneous plate. The theoretical model is a hybrid method that combines analytical and finite elements techniques to describe the scattered displacements. A finite region containing the defects is discretized by finite elements. Outside the local region, the far field solution is expressed as a Fourier summation of the guided modes obtained from the dispersion equation

Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates.

PubMed

Veidt, Martin; Ng, Ching-Tai

2011-03-01

This paper investigates the scattering characteristics of the fundamental anti-symmetric (A(0)) Lamb wave at through holes in composite laminates. Three-dimensional (3D) finite element (FE) simulations and experimental measurements are used to study the physical phenomenon. Unidirectional, bidirectional, and quasi-isotropic composite laminates are considered in the study. The influence of different hole diameter to wavelength aspect ratios and different stacking sequences on wave scattering characteristics are investigated. The results show that amplitudes and directivity distribution of the scattered Lamb wave depend on these parameters. In the case of quasi-isotropic composite laminates, the scattering directivity patterns are dominated by the fiber orientation of the outer layers and are quite different for composite laminates with the same number of laminae but different stacking sequence. The study provides improved physical insight into the scattering phenomena at through holes in composite laminates, which is essential to develop, validate, and optimize guided wave damage detection and characterization techniques. © 2011 Acoustical Society of America

Acoustoelastic Lamb Wave Propagation in Biaxially Stressed Plates (Preprint)

DTIC Science & Technology

2012-03-01

0188 The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing...control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1 . REPORT DATE (DD-MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) March 2012...Journal Article 1 March 2012 – 1 March 2012 4. TITLE AND SUBTITLE ACOUSTOELASTIC LAMB WAVE PROPAGATION IN BIAXIALLY STRESSED PLATES (PREPRINT

Extremely low-frequency Lamb wave band gaps in a sandwich phononic crystal thin plate

NASA Astrophysics Data System (ADS)

Shen, Li; Wu, Jiu Hui; Liu, Zhangyi; Fu, Gang

2015-11-01

In this paper, a kind of sandwich phononic crystal (PC) plate with silicon rubber scatterers embedded in polymethyl methacrylate (PMMA) matrix is proposed to demonstrate its low-frequency Lamb wave band gap (BG) characteristics. The dispersion relationship and the displacement vector fields of the basic slab modes and the locally resonant modes are investigated to show the BG formation mechanism. The anti-symmetric Lamb wave BG is further studied due to its important function in reducing vibration. The analysis on the BG characteristics of the PC through changing their geometrical parameters is performed. By optimizing the structure, a sandwich PC plate with a thickness of only 3 mm and a lower boundary (as low as 23.9 Hz) of the first anti-symmetric BG is designed. Finally, sound insulation experiment on a sandwich PC plate with the thickness of only 2.5 mm is conducted, showing satisfactory noise reduction effect in the frequency range of the anti-symmetric Lamb BG. Therefore, this kind of sandwich PC plate has potential applications in controlling vibration and noise in low-frequency ranges.

Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves

NASA Astrophysics Data System (ADS)

díAz Valdés, Sergio H.; Soutis, Costas

2002-05-01

Amid the nondestructive evaluation techniques available for the inspection of composite materials, only a few are suitable for implementation while the component is in service. The investigation examines the application of Lamb waves at low-frequency-thickness products for the detection of delaminations in thick composite laminates. Surface-mounted piezoelectric devices were excited with a tone burst to generate elastic waves in the structure. Experiments were carried out on composite beam specimens where wave propagation distances over 2 m were achieved and artificially induced delaminations as small as 1 cm2 were successfully identified. The feasibility of employing piezoelectric devices for the development of smart structures, where a small and lightweight transducer system design is required, has been demonstrated. The resonance spectrum method, which is based on the study of spectra obtained by forced mechanical resonance of samples using sine-sweep excitation, has been proposed as a technique for measuring the Ao Lamb mode phase velocity. The finite-element method was also used to investigate qualitatively the dynamic response of laminates to wave propagation. Several locations and spatial distribution of the actuators were examined showing the advantages of using transducers arrays for the inspection of large structures.

Experimental assessment of the influence of welding process parameters on Lamb wave transmission across ultrasonically welded thermoplastic composite joints

NASA Astrophysics Data System (ADS)

Ochôa, Pedro; Fernandez Villegas, Irene; Groves, Roger M.; Benedictus, Rinze

2018-01-01

One of the advantages of thermoplastic composites relative to their thermoset counterparts is the possibility of assembling components through welding. Ultrasonic welding in particular is very promising for industrialization. However, uncertainty in the fatigue and fracture behaviour of composites is still an obstacle to the full utilisation of these materials. Health monitoring is then of vital importance, and Lamb wave techniques have been widely recognised as some of the most promising approaches for that end. This paper presents the first experimental study about the influence of welding travel on the transmission of Lamb waves across ultrasonically welded thermoplastic composite joints in single-lap configuration. The main aim of this research is to start to understand how guided waves interact with the internal structure of ultrasonic welds, so that benign, manufacturing-related structural features can be distinguished from damaging ones in signal interpretation. The power transmission coefficient and the correlation coefficient proved to be suitable for analysing the wave propagation phenomena, allowing quantitative identification of small variations of weld-line thickness and intermolecular diffusion at the weld interface. The conclusions are used to develop a tentative damage detection criterion which can later on assist the design of a Lamb wave based structural health monitoring system for thermoplastic composite structures. The Lamb wave test results are backed up by phased-array inspections, which also provide some extra insight on the internal structure of ultrasonic welds.

Spiral-shaped piezoelectric sensors for Lamb waves direction of arrival (DoA) estimation

NASA Astrophysics Data System (ADS)

De Marchi, L.; Testoni, N.; Marzani, A.

2018-04-01

A novel strategy to design piezoelectric sensors suited for direction of arrival (DoA) estimation of incoming Lamb waves is presented in this work. The designed sensor is composed by two piezoelectric patches (P1, P2) bonded on the structure to be inspected. In particular, by exploiting the Radon transform, the proposed procedure computes the shape of P2 given the shape of P1 so that the difference in time of arrival (DToA) of the Lamb waves at the two patches is linearly related to the DoA while being agnostic of the waveguide dispersion curves. With a dedicated processing procedure, the waveforms acquired from the two electrodes and digitized can be used to retrieve the DoA information. Numerical and experimental results show that DoA estimation performed by means of the proposed shaped transducers is extremely robust.

Broadband attenuation of Lamb waves through a periodic array of thin rectangular junctions

NASA Astrophysics Data System (ADS)

Moiseyenko, Rayisa P.; Pennec, Yan; Marchal, Rémi; Bonello, Bernard; Djafari-Rouhani, Bahram

2014-10-01

We study theoretically subwavelength physical phenomena, such as resonant transmission and broadband sound shielding for Lamb waves propagating in an acoustic metamaterial made of a thin plate drilled with one or two row(s) of rectangular holes. The resonances and antiresonances of periodically arranged rectangular junctions separated by holes are investigated as a function of the geometrical parameters of the junctions. With one and two row(s) of holes, high frequency specific features in the transmission coefficient are explained in terms of a coupling of incident waves with both Fabry-Perot oscillations inside the junctions and induced surface acoustic waves between the homogeneous part of the plate and the row of holes. With two rows of holes, low frequency peaks and dips appear in the transmission spectrum. The choice of the distance between the two rows of holes allows the realization of a broadband low frequency acoustic shielding with attenuation over 99% for symmetric waves in a wide low frequency range and over 90% for antisymmetric ones. The origin of the transmission gap is discussed in terms of localized modes of the "H" element made by the junctions, connecting the two homogeneous parts of the plate.

A Baseline-Free Defect Imaging Technique in Plates Using Time Reversal of Lamb Waves

NASA Astrophysics Data System (ADS)

Hyunjo, Jeong; Sungjong, Cho; Wei, Wei

2011-06-01

We present an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional sidebands that contain the time-of-flight information on the defect location. One of the side-band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free imaging of a defect.

Signal Construction-Based Dispersion Compensation of Lamb Waves Considering Signal Waveform and Amplitude Spectrum Preservation

PubMed Central

Cai, Jian; Yuan, Shenfang; Wang, Tongguang

2016-01-01

The results of Lamb wave identification for the aerospace structures could be easily affected by the nonlinear-dispersion characteristics. In this paper, dispersion compensation of Lamb waves is of particular concern. Compared with the similar research works on the traditional signal domain transform methods, this study is based on signal construction from the viewpoint of nonlinear wavenumber linearization. Two compensation methods of linearly-dispersive signal construction (LDSC) and non-dispersive signal construction (NDSC) are proposed. Furthermore, to improve the compensation effect, the influence of the signal construction process on the other crucial signal properties, including the signal waveform and amplitude spectrum, is considered during the investigation. The linear-dispersion and non-dispersion effects are firstly analyzed. Then, after the basic signal construction principle is explored, the numerical realization of LDSC and NDSC is discussed, in which the signal waveform and amplitude spectrum preservation is especially regarded. Subsequently, associated with the delay-and-sum algorithm, LDSC or NDSC is employed for high spatial resolution damage imaging, so that the adjacent multi-damage or quantitative imaging capacity of Lamb waves can be strengthened. To verify the proposed signal construction and damage imaging methods, the experimental and numerical validation is finally arranged on the aluminum plates. PMID:28772366

Signal Construction-Based Dispersion Compensation of Lamb Waves Considering Signal Waveform and Amplitude Spectrum Preservation.

PubMed

Cai, Jian; Yuan, Shenfang; Wang, Tongguang

2016-12-23

The results of Lamb wave identification for the aerospace structures could be easily affected by the nonlinear-dispersion characteristics. In this paper, dispersion compensation of Lamb waves is of particular concern. Compared with the similar research works on the traditional signal domain transform methods, this study is based on signal construction from the viewpoint of nonlinear wavenumber linearization. Two compensation methods of linearly-dispersive signal construction (LDSC) and non-dispersive signal construction (NDSC) are proposed. Furthermore, to improve the compensation effect, the influence of the signal construction process on the other crucial signal properties, including the signal waveform and amplitude spectrum, is considered during the investigation. The linear-dispersion and non-dispersion effects are firstly analyzed. Then, after the basic signal construction principle is explored, the numerical realization of LDSC and NDSC is discussed, in which the signal waveform and amplitude spectrum preservation is especially regarded. Subsequently, associated with the delay-and-sum algorithm, LDSC or NDSC is employed for high spatial resolution damage imaging, so that the adjacent multi-damage or quantitative imaging capacity of Lamb waves can be strengthened. To verify the proposed signal construction and damage imaging methods, the experimental and numerical validation is finally arranged on the aluminum plates.

Impact damage detection in sandwich composite structures using Lamb waves and laser vibrometry

NASA Astrophysics Data System (ADS)

Lamboul, B.; Passilly, B.; Roche, J.-M.; Osmont, D.

2013-01-01

This experimental study explores the feasibility of impact damage detection in composite sandwich structures using Lamb wave excitation and signals acquired with a laser Doppler vibrometer. Energy maps are computed from the transient velocity wave fields and used to highlight defect areas in impacted coupons of foam core and honeycomb core sandwich materials. The technique performs well for the detection of barely visible damage in this type of material, and is shown to be robust in the presence of wave reverberation. Defect extent information is not always readily retrieved from the obtained defect signatures, which depend on the wave - defect interaction mechanisms.

Characterization of Defects in Composite Material Using Rapidly Acquired Leaky Lamb Wave Dispersion Data

NASA Technical Reports Server (NTRS)

Bar-Cohen, Y.; Mal, A.; Chang, Z.

1998-01-01

The phenomenon of Leaky Lamb Wave (LLW) in composite materials was first observed in 1982 using a Schlieren system. It has been studied extensively by numerous investigators and successfully shown to be an effective quantitative NDE tool.

Tunable modulation of refracted lamb wave front facilitated by adaptive elastic metasurfaces

NASA Astrophysics Data System (ADS)

Li, Shilong; Xu, Jiawen; Tang, J.

2018-01-01

This letter reports designs of adaptive metasurfaces capable of modulating incoming wave fronts of elastic waves through electromechanical-tuning of their cells. The proposed elastic metasurfaces are composed of arrayed piezoelectric units with individually connected negative capacitance elements that are online tunable. By adjusting the negative capacitances properly, accurately formed, discontinuous phase profiles along the elastic metasurfaces can be achieved. Subsequently, anomalous refraction with various angles can be realized on the transmitted lowest asymmetric mode Lamb wave. Moreover, designs to facilitate planar focal lenses and source illusion devices can also be accomplished. The proposed flexible and versatile strategy to manipulate elastic waves has potential applications ranging from structural fault detection to vibration/noise control.

Modeling a surface-mounted Lamb wave emission-reception system: applications to structural health monitoring.

PubMed

Moulin, Emmanuel; Grondel, Sébastien; Assaad, Jamal; Duquenne, Laurent

2008-12-01

The work described in this paper is intended to present a simple and efficient way of modeling a full Lamb wave emission and reception system. The emitter behavior and the Lamb wave generation are predicted using a two-dimensional (2D) hybrid finite element-normal mode expansion model. Then the receiver electrical response is obtained from a finite element computation with prescribed displacements. A numerical correction is applied to the 2D results in order to account for the in-plane radiation divergence caused by the finite length of the emitter. The advantage of this modular approach is that realistic configurations can be simulated without performing cumbersome modeling and time-consuming computations. It also provides insight into the physical interpretation of the results. A good agreement is obtained between predicted and measured signals. The range of application of the method is discussed.

Study of guided wave propagation on a plate between two solid bodies with imperfect contact conditions.

PubMed

Balvantín, A J; Diosdado-De-la-Peña, J A; Limon-Leyva, P A; Hernández-Rodríguez, E

2018-02-01

In this work, fundamental symmetric Lamb wave S0 mode is characterized in terms of its velocity variation as function of the interfacial conditions between solid bodies in contact. Imperfect contact conditions are numerically and experimentally determined by using ultrasonic Lamb wave propagation parameters. For the study, an experimental system was used, formed by two solid aluminum rods (25.4mm in diameter) axially loading a thin aluminum plate to control contact interfacial stiffness. The axially applied load on the aluminum plate was varied from 0MPa to 10MPa. Experimental Lamb wave signals were excited on the plate through two longitudinal contact transducers (1MHz of central frequency) using a pitch-catch configuration. Numerical simulations of contact conditions and Lamb wave propagation were performed through Finite Element Analysis (FEA) in commercial software, ANSYS 15®. Simulated Lamb wave signals were generated by means of a 5 cycles tone burst signals with different frequency values. Results indicate a velocity change in both, experimental and simulated Lamb wave signals as function of the applied load. Finally, a comparison between numerical results and experimental measurements was performed obtaining a good agreement. Copyright © 2017 Elsevier B.V. All rights reserved.

Numerical and experimental study of Lamb wave propagation in a two-dimensional acoustic black hole

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yan, Shiling; Shen, Zhonghua, E-mail: shenzh@njust.edu.cn; Lomonosov, Alexey M.

2016-06-07

The propagation of laser-generated Lamb waves in a two-dimensional acoustic black-hole structure was studied numerically and experimentally. The geometrical acoustic theory has been applied to calculate the beam trajectories in the region of the acoustic black hole. The finite element method was also used to study the time evolution of propagating waves. An optical system based on the laser-Doppler vibration method was assembled. The effect of the focusing wave and the reduction in wave speed of the acoustic black hole has been validated.

Effect of system of lamb rearing and season on early post-partum fertility of ewes and growth performance of lambs in Katahdin sheep.

PubMed

Rastle-Simpson, S; D'Souza, K; Redhead, A; Singh-Knights, D; Baptiste, Q; Knights, M

2017-10-01

The effect of season (S), lamb rearing system (RT) and grain supplementation (GS) on post-partum fertility in Katahdin ewes and growth in Katahdin lambs was evaluated. Katahdin ewes were bred to lamb in fall (n = 36) or spring (n = 56) and at approximately 2.5 months post-partum were randomly assigned to be permanently separated or to continue to suckle their lambs for an additional 3 months. All ewes were joined with rams following treatment to synchronize oestrus. Weaned (W, n = 84) and continuously suckled lambs (CSK, n = 88) were fed forage only (n = 84; hay and pasture for fall- and spring-born lambs respectively) or were supplemented (n = 88; 18% crude protein ration ad libitum) and all weighed biweekly. Ewes rebred in the fall had a shorter ram introduction to lambing interval (p < 0.05), higher prolificacy (p = 0.001) and higher lambing rates (p = 0.02); however, the proportion of ewes lambing was not affected by season. The first service lambing rate was lower in ewes continuously suckling lambs in the spring, but not in the fall breeding season (S × RT, p = 0.03). Lambs that continuously suckled their dams and were supplemented grew quicker and gained more (p < 0.001) than their weaned and unsupplemented counterparts. The effect of CSK on growth rate of lambs was greater in the spring (RT × S; p = 0.05), and the effect of supplementation on growth rate of lambs was greater in the fall (GS × S; p < 0.0001). In conclusion, Katahdin lambs achieved higher weight gains from continuous suckling and grain supplementation. Moreover, Katahdin ewes are capable of early rebreeding post-partum while suckling their lambs, which makes them suited for use in accelerated lambing programmes. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Application of the Pseudo Wigner-Ville Distribution to the Measurement of the Dispersion of Lamb Modes in Graphite/Epoxy Plates

NASA Technical Reports Server (NTRS)

Prosser, W. H.; Seale, M. D.; Smith, B. T.

1997-01-01

Acoustic waves propagate in thin plates as guided or Lamb modes. The velocities of these modes are dispersive in that they depend not only on the material elastic properties and density, but also on the frequency. Accurate characterization of Lamb wave dispersion is important in many acoustic based nondestructive evaluation techniques. It is necessary for ultrasonic measurements in thin plates to determine elastic properties and for flaw detection and localization. In acoustic emission (AE) testing, if not taken into account, highly dispersive Lamb mode propagation can lead to large errors in source location. In this study, the pseudo Wigner-Ville distribution (PWVD) was used for measurement of group velocity dispersion of Lamb waves in a unidirectional graphite/epoxy (AS4/3502) laminate. The PWVD is one of a number of transforms which provide a time-frequency representation of a digitized time series. Broad band acoustic waves were generated by a pencil lead fracture (Hsu-Neilsen source) and were detected with broad band ultrasonic transducers. The arrival times for the lowest order symmetric (S(sub 0)) and antisymmetric (A(sub 0)) Lamb modes were determined from measurements of the time at which the respective peak amplitudes occurred in the PWVD. Measurements were made at several source-to-detector distances and a least squares fit used to calculate the velocity. Results are presented for propagation along, and perpendicular to, the fiber direction. Theoretical dispersion curves were also calculated and a comparison between theory and experiment demonstrates good agreement.

Effect of Prestresses on the Dispersion of Quasi-Lamb Waves in the System Consisting of an Ideal Liquid Layer and a Compressible Elastic Layer

NASA Astrophysics Data System (ADS)

Bagno, A. M.

2017-03-01

The propagation of quasi-Lamb waves in a prestrained compressible elastic layer interacting with a layer of an ideal compressible fluid is studied. The three-dimensional equations of linearized elasticity and the assumption of finite strains for the elastic layer and the three-dimensional linearized Euler equations for the fluid are used. The dispersion curves for the quasi-Lamb modes are plotted over a wide frequency range. The effect of prestresses and the thickness of the elastic and liquid layers on the frequency spectrum of normal quasi-Lamb waves is analyzed. The localization properties of the lower quasi-Lamb modes in the elastic-fluid waveguides are studied. The numerical results are presented in the form of graphs and analyzed

Research on a Lamb Wave and Particle Filter-Based On-Line Crack Propagation Prognosis Method.

PubMed

Chen, Jian; Yuan, Shenfang; Qiu, Lei; Cai, Jian; Yang, Weibo

2016-03-03

Prognostics and health management techniques have drawn widespread attention due to their ability to facilitate maintenance activities based on need. On-line prognosis of fatigue crack propagation can offer information for optimizing operation and maintenance strategies in real-time. This paper proposes a Lamb wave-particle filter (LW-PF)-based method for on-line prognosis of fatigue crack propagation which takes advantages of the possibility of on-line monitoring to evaluate the actual crack length and uses a particle filter to deal with the crack evolution and monitoring uncertainties. The piezoelectric transducers (PZTs)-based active Lamb wave method is adopted for on-line crack monitoring. The state space model relating to crack propagation is established by the data-driven and finite element methods. Fatigue experiments performed on hole-edge crack specimens have validated the advantages of the proposed method.

Lamb wave propagation in a restricted geometry composite pi-joint specimen

NASA Astrophysics Data System (ADS)

Blackshire, James L.; Soni, Som

2012-05-01

The propagation of elastic waves in a material can involve a number of complex physical phenomena, resulting in both subtle and dramatic effects on detected signal content. In recent years, the use of advanced methods for characterizing and imaging elastic wave propagation and scattering processes has increased, where for example the use of scanning laser vibrometry and advanced computational models have been used very effectively to identify propagating modes, scattering phenomena, and damage feature interactions. In the present effort, the propagation of Lamb waves within a narrow, constrained geometry composite pi-joint structure are studied using 3D finite element models and scanning laser vibrometry measurements, where the effects of varying sample thickness, complex joint curvatures, and restricted structure geometries are highlighted, and a direct comparison of computational and experimental results are provided for simulated and realistic geometry composite pi-joint samples.

Temperament and its heritability in Corriedale and Merino lambs.

PubMed

Zambra, N; Gimeno, D; Blache, D; van Lier, E

2015-03-01

Temperament can be defined as the fearfulness and reactivity of an animal in response to humans and strange, novel or threatening environments. The productive performance of an animal is affected by its temperament, and selection of calm animals might improve their adaptation to the farming environment and handling, as well as improve productivity. The temperament was measured in lambs of two breeds of sheep in Uruguay. The effects of dam's age, type of birth, age of the lamb and contemporary group (CG; lambs belonging to the same year, flock, sex and rearing group) on the temperament of the lambs and the heritability of temperament were estimated with a Bayesian analysis using Gibbs sampling. Overall, 4962 Corriedale lambs and 2952 Merino lambs from 13 farms were tested. Temperament was measured using the isolation box test, isolating a lamb inside the box for 30 s, and recording the vibrations produced by its movements. The average temperament score (±s.e.m.) of the Corriedale lambs was 24.7 (±0.23) and that of the Merino was 36.8 (±0.45). Temperament was not associated with dam's age, type of birth or lamb's age. There were no relevant differences in the agitation score between lambs born in 2010 and 2011. The mean of the distribution of possible values of heritability (±s.d.) was 0.18 (±0.05) for the Corriedale and 0.31 (±0.06) for the Merino. The likelihood of heritability values to be greater than 0.15 exceeded 70% in the Corriedale and 90% in the Merino. The temperament of Merino and Corriedale sheep in Uruguay is moderately heritable. It is not related to dam's age, type of birth or age of the lambs; however, it is affected by some aspect of the CG.

Negative group velocity Lamb waves on plates and applications to the scattering of sound by shells

NASA Astrophysics Data System (ADS)

Marston, Philip L.

2003-05-01

Symmetric Lamb waves on plates exhibit anomalies for certain regions of frequency. The phase velocity appears to be double-valued [M. F. Werby and H. Überall, J. Acoust. Soc. Am. 111, 2686-2691 (2002)] with one of the branches having a negative group velocity relative to the corresponding phase velocity. The classification of the symmetric plate modes for frequencies appearing to have a double-valued phase velocity is reviewed here. The complication of a double-valued velocity is avoided by examining mode orthogonality and the complex wave-number spectra. Various authors have noted an enhancement in the backscattering of sound by elastic shells in water that occurs for frequencies where symmetric leaky Lamb waves (generalized to case of a shell) have contra-directed group and phase velocities. The ray diagram for negative group velocity contributions to the scattering by shells [G. Kaduchak, D. H. Hughes, and P. L. Marston, J. Acoust. Soc. Am. 96, 3704-3714 (1994)] is unusual since for this type of mode the energy on the shell flows in the opposite direction of the wave vector. Circumnavigation of the shell is not required for the leaky ray to be backward directed.

Disbond Detection in Bonded Aluminum Joints Using Lamb Wave Amplitude and Time-of-Flight

NASA Technical Reports Server (NTRS)

Sun, Keun J.; Johnston, Patrick H.

1992-01-01

In recent years, there was a need of developing efficient nondestructive integrity assessment techniques for large area laminate structures, such as detections of disbond, crack, and corrosion in fuselage of an aircraft. Together with the improving tomography and computer technologies, progress has been made in many fields in NDE towards a faster inspection. Ultrasonically, Lamb wave is considered to be a candidate for large area inspections based on its capability of propagating a relatively long distance in thin plates and its media-thickness-dependent propagation properties. Moreover, the occurence of disbonds, corrosion, and even cracks often results in reduction of effective thickness of a laminate. The idea is to assess the condition of a structure by sensing the response of propagating Lamb waves to these flaws over long path length. A series of tests in the sequence of disbond, corrosion, and crack have been done on various types of specimen to investigate the feasibility of this approach. This paper will present some of the test results for disbond detection on aluminum lap splice joints.

Imaging of a Defect in Thin Plates Using the Time Reversal of Single Mode Lamb Waves

NASA Astrophysics Data System (ADS)

Jeong, Hyunjo; Lee, Jung-Sik; Bae, Sung-Min

2011-06-01

This paper presents an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional sidebands that contain the time-of-flight information on the defect location. One of the side band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free detection of a defect, so that experimental studies are needed to verify the proposed method and to be applied to real structure.

Lamb wave tomographic imaging system for aircraft structural health assessment

NASA Astrophysics Data System (ADS)

Schwarz, Willi G.; Read, Michael E.; Kremer, Matthew J.; Hinders, Mark K.; Smith, Barry T.

1999-01-01

A tomographic imaging system using ultrasonic Lamb waves for the nondestructive inspection of aircraft components such as wings and fuselage is being developed. The computer-based system provides large-area inspection capability by electronically scanning an array of transducers that can be easily attached to flat and curved surface without moving parts. Images of the inspected area are produced in near real time employing a tomographic reconstruction method adapted from seismological applications. Changes in material properties caused by structural flaws such as disbonds, corrosion, and fatigue cracks can be effectively detected and characterized utilizing this fast NDE technique.

Lamb Wave Propagation in a Restricted Geometry Composite PI-Joint Specimen (Preprint)

DTIC Science & Technology

2011-11-01

adhesive, and were located along the length and height of the specimen as depicted in Figure 3. The sensors were 6.35 mm round disks of PZT , with a...in both cases for R1, R2, and R3. 3D Finite Element Model Geometry 200mm length 50mm width 140mm height x z y PZT Actuation Sensor...health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection”, Smart Mater. Struct., Vol. 14, No. 6, 2005. 16

Lamb wave based damage detection using Matching Pursuit and Support Vector Machine classifier

NASA Astrophysics Data System (ADS)

Agarwal, Sushant; Mitra, Mira

2014-03-01

In this paper, the suitability of using Matching Pursuit (MP) and Support Vector Machine (SVM) for damage detection using Lamb wave response of thin aluminium plate is explored. Lamb wave response of thin aluminium plate with or without damage is simulated using finite element. Simulations are carried out at different frequencies for various kinds of damage. The procedure is divided into two parts - signal processing and machine learning. Firstly, MP is used for denoising and to maintain the sparsity of the dataset. In this study, MP is extended by using a combination of time-frequency functions as the dictionary and is deployed in two stages. Selection of a particular type of atoms lead to extraction of important features while maintaining the sparsity of the waveform. The resultant waveform is then passed as input data for SVM classifier. SVM is used to detect the location of the potential damage from the reduced data. The study demonstrates that SVM is a robust classifier in presence of noise and more efficient as compared to Artificial Neural Network (ANN). Out-of-sample data is used for the validation of the trained and tested classifier. Trained classifiers are found successful in detection of the damage with more than 95% detection rate.

Characterization of Degradation Progressive in Composite Laminates Subjected to Thermal Fatigue and Moisture Diffusion by Lamb Waves.

PubMed

Li, Weibin; Xu, Chunguang; Cho, Younho

2016-02-19

Laminate composites which are widely used in the aeronautical industry, are usually subjected to frequency variation of environmental temperature and excessive humidity in the in-service environment. The thermal fatigue and moisture absorption in composites may induce material degradation. There is a demand to investigate the coupling damages mechanism and characterize the degradation evolution of composite laminates for the particular application. In this paper, the degradation evolution in unidirectional carbon/epoxy composite laminates subjected to thermal fatigue and moisture absorption is characterized by Lamb waves. The decrease rate of Lamb wave velocity is used to track the degradation evolution in the specimens. The results show that there are two stages for the progressive degradation of composites under the coupling effect of thermal cyclic loading and moisture diffusion. The present work provides an alternative to monitoring the degradation evolution of in-service aircraft composite Laminates.

Measurement of leaky Lamb wave dispersion curves with application on coating characterization

NASA Astrophysics Data System (ADS)

Lee, Yung-Chun; Cheng, Sheng Wen

2001-04-01

This paper describes a new measurement system for measuring dispersion curves of leaky Lamb waves. The measurement system is based on a focusing PVDF transducer, the defocusing measurement, the V(f,z) waveform processing method, and an image displaying technique. The measurement system is applied for the determination of thin-film elastic properties, namely Young's modulus and shear modulus, by the inversion of dispersion curves measured from a thin-film/plate configuration. Elastic constants of electro-deposited nickel layers are determined with this method.

Acousto-optic modulation of a photonic crystal nanocavity with Lamb waves in microwave K band

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tadesse, Semere A.; School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455; Li, Huan

2015-11-16

Integrating nanoscale electromechanical transducers and nanophotonic devices potentially can enable acousto-optic devices to reach unprecedented high frequencies and modulation efficiency. Here, we demonstrate acousto-optic modulation of a photonic crystal nanocavity using Lamb waves with frequency up to 19 GHz, reaching the microwave K band. The devices are fabricated in suspended aluminum nitride membrane. Excitation of acoustic waves is achieved with interdigital transducers with period as small as 300 nm. Confining both acoustic wave and optical wave within the thickness of the membrane leads to improved acousto-optic modulation efficiency in these devices than that obtained in previous surface acoustic wave devices. Ourmore » system demonstrates a scalable optomechanical platform where strong acousto-optic coupling between cavity-confined photons and high frequency traveling phonons can be explored.« less

Guided ultrasonic wave beam skew in silicon wafers

NASA Astrophysics Data System (ADS)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2018-04-01

In the photovoltaic industry, monocrystalline silicon wafers are employed for solar cells with high conversion efficiency. Micro-cracks induced by the cutting process in the thin wafers can lead to brittle wafer fracture. Guided ultrasonic waves would offer an efficient methodology for the in-process non-destructive testing of wafers to assess micro-crack density. The material anisotropy of the monocrystalline silicon leads to variations of the guided wave characteristics, depending on the propagation direction relative to the crystal orientation. Selective guided ultrasonic wave excitation was achieved using a contact piezoelectric transducer with custom-made wedges for the A0 and S0 Lamb wave modes and a transducer holder to achieve controlled contact pressure and orientation. The out-of-plane component of the guided wave propagation was measured using a non-contact laser interferometer. The phase slowness (velocity) of the two fundamental Lamb wave modes was measured experimentally for varying propagation directions relative to the crystal orientation and found to match theoretical predictions. Significant wave beam skew was observed experimentally, especially for the S0 mode, and investigated from 3D finite element simulations. Good agreement was found with the theoretical predictions based on nominal material properties of the silicon wafer. The important contribution of guided wave beam skewing effects for the non-destructive testing of silicon wafers was demonstrated.

Effect of Liquid Viscosity on Dispersion of Quasi-Lamb Waves in an Elastic-Layer-Viscous-Liquid-Layer System

NASA Astrophysics Data System (ADS)

Guz, A. N.; Bagno, A. M.

2017-07-01

The dispersion curves are constructed and propagation of quasi-Lamb waves are studied for wide range of frequencies based on the Navier -Stokes three-dimensional linearized equations for a viscous liquid and linear equations of the classical theory of elasticity for an elastic layer. For a thick liquid layer, the effect of the viscosity of the liquid and the thickness of elastic and liquid layers on the phase velocities and attenuation coefficients of quasi-Lamb modes is analyzed. It is shown that in the case of a thick liquid layer for all modes, there are elastic layers of certain thickness with minimal effect of liquid viscosity on the phase velocities and attenuation coefficients of modes. It is also discovered that for some modes, there are both certain thicknesses and certain ranges of thickness where the effect of liquid viscosity on the phase velocities and attenuation coefficients of these modes is considerable. We ascertain that liquid viscosity promotes decrease of the penetration depth of the lowest quasi-Lamb mode into the liquid. The developed approach and the obtained results make it possible to ascertain for wave processes the limits of applicability of the model of ideal compressible fluid. Numerical results in the form of graphs are adduced and analyzed.

Comparative study of electromechanical impedance and Lamb wave techniques for fatigue crack detection and monitoring in metallic structures

NASA Astrophysics Data System (ADS)

Lim, Say Ian; Liu, Yu; Soh, Chee Kiong

2012-04-01

Fatigue cracks often initiate at the weld toes of welded steel connections. Usually, these cracks cannot be identified by the naked eyes. Existing identification methods like dye-penetration test and alternating current potential drop (ACPD) may be useful for detecting fatigue cracks at the weld toes. To apply these non-destructive evaluation (NDE) techniques, the potential sites have to be accessible during inspection. Therefore, there is a need to explore other detection and monitoring techniques for fatigue cracks especially when their locations are inaccessible or cost of access is uneconomical. Electro-mechanical Impedance (EMI) and Lamb wave techniques are two fast growing techniques in the Structural Health Monitoring (SHM) community. These techniques use piezoelectric ceramics (PZT) for actuation and sensing. Since the monitoring site is only needed to be accessed once for the instrumentation of the transducers, remote monitoring is made possible. The permanent locations of these transducers also translate to having consistent measurement for monitoring. The main focus of this study is to conduct a comparative investigation on the effectiveness and efficiency of the EMI technique and the Lamb wave technique for successful fatigue crack identification and monitoring of welded steel connections using piezoelectric transducers. A laboratory-sized non-load carrying fillet weld specimen is used in this study. The specimen is subjected to cyclic tensile load and data for both techniques are acquired at stipulated intervals. It can be concluded that the EMI technique is sensitive to the crack initiation phase while the Lamb wave technique correlates well with the crack propagation phase.

Dispersion of Lamb waves in a honeycomb composite sandwich panel.

PubMed

Baid, Harsh; Schaal, Christoph; Samajder, Himadri; Mal, Ajit

2015-02-01

Composite materials are increasingly being used in advanced aircraft and aerospace structures. Despite their many advantages, composites are often susceptible to hidden damages that may occur during manufacturing and/or service of the structure. Therefore, safe operation of composite structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost effective method for defects monitoring in advanced structures due to their long propagation range and their sensitivity to defects in their propagation path. In this paper, some of the useful properties of guided Lamb type waves are investigated, using analytical, numerical and experimental methods, in an effort to provide the knowledge base required for the development of viable structural health monitoring systems for composite structures. The laboratory experiments involve a pitch-catch method in which a pair of movable transducers is placed on the outside surface of the structure for generating and recording the wave signals. The specific cases considered include an aluminum plate, a woven composite laminate and an aluminum honeycomb sandwich panel. The agreement between experimental, numerical and theoretical results are shown to be excellent in certain frequency ranges, providing a guidance for the design of effective inspection systems. Copyright © 2014 Elsevier B.V. All rights reserved.

Composite Materials NDE Using Enhanced Leaky Lamb Wave Dispersion Data Acquisition Method

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Mal, Ajit; Lih, Shyh-Shiuh; Chang, Zensheu

1999-01-01

The leaky Lamb wave (LLW) technique is approaching a maturity level that is making it an attractive quantitative NDE tool for composites and bonded joints. Since it was first observed in 1982, the phenomenon has been studied extensively, particularly in composite materials. The wave is induced by oblique insonification using a pitch-catch arrangement and the plate wave modes are detected by identifying minima in the reflected spectra to obtain the dispersion data. The wave behavior in multi-orientation laminates has been well documented and corroborated experimentally with high accuracy. The sensitivity of the wave to the elastic constants of the material and to the boundary conditions led to the capability to measure the elastic properties of bonded joints. Recently, the authors significantly enhanced the LLW method's capability by increasing the speed of the data acquisition, the number of modes that can be identified and the accuracy of the data inversion. In spite of the theoretical and experimental progress, methods that employ oblique insonification of composites are still not being applied as standard industrial NDE methods. The authors investigated the issues that are hampering the transition of the LLW to industrial applications and identified 4 key issues. The current capability of the method and the nature of these issues are described in this paper.

Lamb Wave Stiffness Characterization of Composites Undergoing Thermal-Mechanical Aging

NASA Technical Reports Server (NTRS)

Seale, Michael D.; Madaras, Eric I.

2004-01-01

The introduction of new, advanced composite materials into aviation systems requires a thorough understanding of the long term effects of combined thermal and mechanical loading upon those materials. Analytical methods investigating the effects of intense thermal heating combined with mechanical loading have been investigated. The damage mechanisms and fatigue lives were dependent on test parameters as well as stress levels. Castelli, et al. identified matrix dominated failure modes for out-of-phase cycling and fiber dominated damage modes for in-phase cycling. In recent years, ultrasonic methods have been developed that can measure the mechanical stiffness of composites. To help evaluate the effect of aging, a suitably designed Lamb wave measurement system is being used to obtain bending and out-of-plane stiffness coefficients of composite laminates undergoing thermal-mechanical loading. The system works by exciting an antisymmetric Lamb wave and calculating the velocity at each frequency from the known transducer separation and the measured time-of-flight. The same peak in the waveforms received at various distances is used to measure the time difference between the signals. The velocity measurements are accurate and repeatable to within 1% resulting in reconstructed stiffness values repeatable to within 4%. Given the material density and plate thickness, the bending and out-of-plane shear stiffnesses are calculated from a reconstruction of the dispersion curve. A mechanical scanner is used to move the sensors over the surface to map the time-of-flight, velocity, or stiffnesses of the entire specimen. Access to only one side of the material is required and no immersion or couplants are required because the sensors are dry coupled to the surface of the plate. In this study, the elastic stiffnesses D(sub 11), D(sub 22), A(sub 44), and A(sub 55) as well as time-of-flight measurements for composite samples that have undergone combined thermal and mechanical aging for

Modeling of phase velocity and frequency spectrum of guided Lamb waves in piezoelectric-semiconductor multilayered structures made of AlAs and GaAs

NASA Astrophysics Data System (ADS)

Othmani, Cherif; Takali, Farid; Njeh, Anouar

2017-11-01

Modeling of guided Lamb waves propagation in piezoelectric-semiconductor multilayered structures made of AlAs and GaAs is evaluated in this paper. Here, the Legendre polynomial method is used to calculate dispersion curves, frequency spectrum and field distributions of guided Lamb waves propagation modes in AlAs, GaAs, AlAs/GaAs and AlAs/GaAs/AlAs-1/2/1 structures. In fact, formulations are given for open-circuit surface. Consequently, the polynomial method is numerically stable according to the total number of layers and the frequency range. This analysis is meaningful for the applications of the piezoelectric-semiconductor multilayered structures made of AlAs and GaAs such as in novel acoustic devices.

Quantitative assessment of corneal viscoelasticity using optical coherence elastography and a modified Rayleigh-Lamb equation

NASA Astrophysics Data System (ADS)

Han, Zhaolong; Aglyamov, Salavat R.; Li, Jiasong; Singh, Manmohan; Wang, Shang; Vantipalli, Srilatha; Wu, Chen; Liu, Chih-hao; Twa, Michael D.; Larin, Kirill V.

2015-02-01

We demonstrate the use of a modified Rayleigh-Lamb frequency equation in conjunction with noncontact optical coherence elastography to quantify the viscoelastic properties of the cornea. Phase velocities of air-pulse-induced elastic waves were extracted by spectral analysis and used for calculating the Young's moduli of the samples using the Rayleigh-Lamb frequency equation (RLFE). Validation experiments were performed on 2% agar phantoms (n=3) and then applied to porcine corneas (n=3) in situ. The Young's moduli of the porcine corneas were estimated to be ˜60 kPa with a shear viscosity ˜0.33 Pa.s. The results demonstrate that the RLFE is a promising method for noninvasive quantification of the corneal biomechanical properties and may potentially be useful for clinical ophthalmological applications.

Report: Prevalence and antibiotic trials against Salmonella enterica isolated from diarrheic lambs and kids.

PubMed

Iqbal, Muhammad Kashif; Ijaz, Muhammad; Aslam, Hassaan Bin; Farooqi, Shahid Hussain; Ahmad, Syed Saleem; Akhtar, Raheela

2017-11-01

Salmonella enterica (S. enterica) is the major zoonotic threat for small ruminants and humans responsible for huge economic losses and high mortality in Pakistan. Lambs and kids of Lahore district were examined to determine the prevalence, hematology and chemotherapy of S. enterica. A total of 200 diarrheic samples (n=100 lambs; n=100 kids) were collected and examined; 59 (29.50%) were found positive for S. enterica. Lambs had lightly greater prevalence (31%) than kids (29%). The frequency analysis (OR=1.16 [reciprocal =0.87]) showed non-significant difference in both the lambs and kids. The significant decrease (Pℜ0.001) in hemoglobin, pack cell volume and total erythrocyte count was observed in infected lambs and kids. Results of in-vitro antibiotic susceptibility test revealed that S. enteric isolated from both lambs and kids were susceptible to levofloxacin, ciprofloxacin, ofloxacin, gentamicin, azithromycin, tobramycin, amoxicillin, ampicillin and nalidixic acid. Where as the results of in vivo antibiotic trials showed that isolates from both lambs and the kids with diarrhea were susceptible to levofloxacin and ciprofloxacin.

A pulse coding and decoding strategy to perform Lamb wave inspections using simultaneously multiple actuators

NASA Astrophysics Data System (ADS)

De Marchi, Luca; Marzani, Alessandro; Moll, Jochen; Kudela, Paweł; Radzieński, Maciej; Ostachowicz, Wiesław

2017-07-01

The performance of Lamb wave based monitoring systems, both in terms of diagnosis time and data complexity, can be enhanced by increasing the number of transducers used to actuate simultaneously the guided waves in the inspected medium. However, in case of multiple simultaneously-operated actuators the interference among the excited wave modes within the acquired signals has to be considered for the further processing. To this aim, in this work a code division strategy based on the Warped Frequency Transform is presented. At first, the proposed procedure encodes actuation pulses using Gold sequences. Next, for each considered actuator the acquired signals are compensated from dispersion by cross correlating the warped version of the actuated and received signals. Compensated signals form the base for a final wavenumber imaging meant at emphasizing defects and or anomalies by removing incident wavefield and edge reflections. The proposed strategy is tested numerically, and validated through an experiment in which guided waves are actuated in a plate by four piezoelectric transducers operating simultaneously.

Plane Evanescent Waves and Interface Waves

NASA Astrophysics Data System (ADS)

Luppé, F.; Conoir, J. M.; El Kettani, M. Ech-Cherif; Lenoir, O.; Izbicki, J. L.; Duclos, J.; Poirée, B.

The evanescent plane wave formalism is used to obtain the characteristic equation of the normal vibration modes of a plane elastic solid embedded in a perfect fluid. Simple drawings of the real and imaginary parts of complex wave vectors make quite clear the choice of the Riemann sheets on which the roots of the characteristic equation are to be looked for. The generalized Rayleigh wave and the Scholte - Stoneley wave are then described. The same formalism is used to describe Lamb waves on an elastic plane plate immersed in water. The damping, due to energy leaking in the fluid, is shown to be directly given by the projection of evanescence vectors on the interface. Measured values of the damping coefficient are in good agreement with those derived from calculations. The width of the angular resonances associated to Lamb waves or Rayleigh waves is also directly related to this same evanescence vectors projection, as well as the excitation coefficient of a given Lamb wave excited by a plane incident wave. This study shows clearly the strong correlation between the resonance point of view and the wave one in plane interface problems.

Experimental and theoretical study of Rayleigh-Lamb waves in a plate containing a surface-breaking crack

NASA Technical Reports Server (NTRS)

Paffenholz, Joseph; Fox, Jon W.; Gu, Xiaobai; Jewett, Greg S.; Datta, Subhendu K.

1990-01-01

Scattering of Rayleigh-Lamb waves by a normal surface-breaking crack in a plate has been studied both theoretically and experimentally. The two-dimensionality of the far field, generated by a ball impact source, is exploited to characterize the source function using a direct integration technique. The scattering of waves generated by this impact source by the crack is subsequently solved by employing a Green's function integral expression for the scattered field coupled with a finite element representation of the near field. It is shown that theoretical results of plate response, both in frequency and time, are similar to those obtained experimentally. Additionally, implication for practical applications are discussed.

Optimizing a spectral element for modeling PZT-induced Lamb wave propagation in thin plates

NASA Astrophysics Data System (ADS)

Ha, Sungwon; Chang, Fu-Kuo

2010-01-01

Use of surface-mounted piezoelectric actuators to generate acoustic ultrasound has been demonstrated to be a key component of built-in nondestructive detection evaluation (NDE) techniques, which can automatically inspect and interrogate damage in hard-to-access areas in real time without disassembly of the structural parts. However, piezoelectric actuators create complex waves, which propagate through the structure. Having the capability to model piezoelectric actuator-induced wave propagation and understanding its physics are essential to developing advanced algorithms for the built-in NDE techniques. Therefore, the objective of this investigation was to develop an efficient hybrid spectral element for modeling piezoelectric actuator-induced high-frequency wave propagation in thin plates. With the hybrid element we take advantage of both a high-order spectral element in the in-plane direction and a linear finite element in the thickness direction in order to efficiently analyze Lamb wave propagation in thin plates. The hybrid spectral element out-performs other elements in terms of leading to significantly faster computation and smaller memory requirements. Use of the hybrid spectral element is proven to be an efficient technique for modeling PZT-induced (PZT: lead zirconate titanate) wave propagation in thin plates. The element enables fundamental understanding of PZT-induced wave propagation.

Theoretical study on the dispersion curves of Lamb waves in piezoelectric-semiconductor sandwich plates GaAs-FGPM-AlAs: Legendre polynomial series expansion

NASA Astrophysics Data System (ADS)

Othmani, Cherif; Takali, Farid; Njeh, Anouar

2017-06-01

In this paper, the propagation of the Lamb waves in the GaAs-FGPM-AlAs sandwich plate is studied. Based on the orthogonal function, Legendre polynomial series expansion is applied along the thickness direction to obtain the Lamb dispersion curves. The convergence and accuracy of this polynomial method are discussed. In addition, the influences of the volume fraction p and thickness hFGPM of the FGPM middle layer on the Lamb dispersion curves are developed. The numerical results also show differences between the characteristics of Lamb dispersion curves in the sandwich plate for various gradient coefficients of the FGPM middle layer. In fact, if the volume fraction p increases the phase velocity will increases and the number of modes will decreases at a given frequency range. All the developments performed in this paper were implemented in Matlab software. The corresponding results presented in this work may have important applications in several industry areas and developing novel acoustic devices such as sensors, electromechanical transducers, actuators and filters.

Index selection in terminal sires improves lamb performance at finishing.

PubMed

Márquez, G C; Haresign, W; Davies, M H; Roehe, R; Bünger, L; Simm, G; Lewis, R M

2013-01-01

Lamb meat is often perceived by consumers as fatty, and consumption has decreased in recent decades. A lean growth index was developed in the UK for terminal sire breeds to increase carcass lean content and constrain fat content at a constant age end point. The purposes of this study were 1) to evaluate the effects of index selection of terminal sires on their crossbred offspring at finishing and 2) to evaluate its effectiveness within terminal sire breeds. Approximately 70% of lambs marketed in the UK have been sired by rams of breeds typically thought of as specialized terminal sires. The most widely used are Charollais, Suffolk, and Texel. These breeds participated in sire referencing schemes from the early 1990s by sharing rams among flocks selected on the lean growth index. From 1999 to 2002 approximately 15 "high" and 15 "low" lean growth index score rams were selected from within their sire referencing schemes and mated to Welsh and Scottish Mule ewes. Their crossbred offspring were commercially reared on 3 farms in the UK. Lambs were finished to an estimated 11% subcutaneous fat by visual evaluation. At finishing, lambs were weighed, ultrasonically scanned, and assessed for condition score and conformation. Records were obtained for 6356 lambs on finishing BW (FWT), ultrasonic muscle depth (UMD), ultrasonic fat depth, overall condition score (OCS), and conformation of gigot, loin, and shoulder. Ultrasonic fat depth was log transformed (logUFD) to approach normality. High-index-sired lambs were heavier at finishing (1.2±0.2 kg) with thicker UMD (0.7±0.2 mm) and less logUFD (0.08±0.01 mm; P<0.05). There were no differences in OCS or conformation based on the sire index or breed (P>0.08). Suffolk-sired lambs were heavier than Charollais (1.0±0.3 kg), which were heavier than Texel (0.9±0.3 kg; P<0.001). Texel-sired lambs had thicker UMD than Charollais (0.7±0.2 mm; P<0.001) but were not different than Suffolk. Charollais-sired lambs had greater log

Low pasture allowance until late gestation in ewes: behavioural and physiological changes in ewes and lambs from lambing to weaning.

PubMed

Freitas-de-Melo, A; Ungerfeld, R; Hötzel, M J; Orihuela, A; Pérez-Clariget, R

2017-02-01

Low pasture allowance during gestation affects ewes' BW at parturition, the bond with their lamb, lamb development, and thus also may affect their responses to weaning. The objectives were to determine if native pasture allowance from before conception until late pregnancy affects ewe-lamb behaviours at lambing, ewes' milk yield, lambs' BW, and the behavioural and physiological changes of ewes and lambs at weaning. From 23 days before conception until 122 days of pregnancy, 24 ewes grazed on two different native pasture allowances: high (10 to 12 kg of dry matter (DM)/100 kg of BW per day; HPA treatment; n=12) or low (5 to 8 kg of DM/100 kg of BW per day; LPA treatment; n=12). Thereafter, all ewes grazed on Festuca arundinacea and received rice bran and crude glycerine. Ewes' body condition score (BCS) and BW were recorded during pregnancy and postpartum periods. Milk yield was determined on days 32, 41 and 54 after lambing. Lambs' BW was recorded from birth until 72 days after lambing. Latency from parturition until the ewe licked her lamb, maternal behaviour score (a test that evaluates maternal attachment to the lamb) and latency for lamb to stand up and suckle were determined. The behaviour of the lambs and ewes was recorded before and after weaning (at 65 days). The ewes' serum total protein, albumin and globulin concentrations were measured before and after weaning. The HPA ewes presented greater BW (P<0.005) and BCS (P<0.005) than the LPA ewes during pregnancy and postpartum (P<0.04), and had a greater milk yield than the LPA ewes (P<0.03). Treatments did not influence any behaviour at lambing, lambs' BW, neither the ewes' behavioural and physiological changes at weaning. HPA lambs paced and vocalized more than LPA lambs (P<0.0001). The variation of albumin concentration before and after weaning was greater in the HPA lambs than in the LPA lambs (P<0.0001). In conclusion, although ewes' BW, BCS and milk production were affected by pasture allowance until

Lamb wave band gaps in a double-sided phononic plate

NASA Astrophysics Data System (ADS)

Wang, Peng; Chen, Tian-Ning; Yu, Kun-Peng; Wang, Xiao-Peng

2013-02-01

In this paper, we report on the theoretical investigation of the propagation characteristics of Lamb wave in a phononic crystal structure constituted by a square array of cylindrical stubs deposited on both sides of a thin homogeneous plate. The dispersion relations, the power transmission spectra, and the displacement fields of the eigenmodes are studied by using the finite-element method. We investigate the evolution of band gaps in the double-sided phononic plate with stub height on both sides arranged from an asymmetrical distribution to a symmetrical distribution gradually. Numerical results show that as the double stubs in a unit cell arranged more symmetrically on both sides, band width shifts, new band gaps appear, and the bands become flat due to localized resonant modes which couple with plate modes. Specially, more band gaps and flat bands can be found in the symmetrical system as a result of local resonances of the stubs which interact in a stronger way with the plate modes. Moreover, the symmetrical double-sided plate exhibits lower and smaller band gap than that of the asymmetrical plate. These propagation properties of elastic or acoustic waves in the double-sided plate can potentially be utilized to generate filters, slow the group velocity, low-frequency sound insulation, and design acoustic sensors.

Simulation of Detecting Damage in Composite Stiffened Panel Using Lamb Waves

NASA Technical Reports Server (NTRS)

Wang, John T.; Ross, Richard W.; Huang, Guo L.; Yuan, Fuh G.

2013-01-01

Lamb wave damage detection in a composite stiffened panel is simulated by performing explicit transient dynamic finite element analyses and using signal imaging techniques. This virtual test process does not need to use real structures, actuators/sensors, or laboratory equipment. Quasi-isotropic laminates are used for the stiffened panels. Two types of damage are studied. One type is a damage in the skin bay and the other type is a debond between the stiffener flange and the skin. Innovative approaches for identifying the damage location and imaging the damage were developed. The damage location is identified by finding the intersection of the damage locus and the path of the time reversal wave packet re-emitted from the sensor nodes. The damage locus is a circle that envelops the potential damage locations. Its center is at the actuator location and its radius is computed by multiplying the group velocity by the time of flight to damage. To create a damage image for estimating the size of damage, a group of nodes in the neighborhood of the damage location is identified for applying an image condition. The image condition, computed at a finite element node, is the zero-lag cross-correlation (ZLCC) of the time-reversed incident wave signal and the time reversal wave signal from the sensor nodes. This damage imaging process is computationally efficient since only the ZLCC values of a small amount of nodes in the neighborhood of the identified damage location are computed instead of those of the full model.

Comparison of parasitological and productive traits of Criollo lambs native to the central Mexican Plateau and Suffolk lambs experimentally infected with Haemonchus contortus.

PubMed

Alba-Hurtado, F; Romero-Escobedo, E; Muñoz-Guzmán, M A; Torres-Hernández, G; Becerril-Pérez, C M

2010-09-20

The study compares the parasitological and productive traits of Criollo lambs native to the central Mexican Plateau (CNCMP) and Suffolk (SU) lambs experimentally infected with Haemonchus contortus. CNCMP lambs (n=20) and SU lambs (n=15) were infected with L3 of H. contortus while five lambs of each genotype were kept as controls. Fecal egg count (FEC), packed cell volume (PCV), blood eosinophil number (BEN), ocular mucous membrane color (as measured by the FAMACHA index), changes in body condition score (BCS) and cumulative live weight gain (CLWG) were measured weekly during a 20-week period. On week 20, all animals were euthanized and the number of adult worms (AW) in the abomasum was counted. Infected SU lambs had higher (p<0.05) FEC and AW mean values compared to CNCMP lambs, which had a higher mean BEN count (p<0.05). Infected lambs had lower PCV values than controls, regardless of genotype, and had a negative correlation (r=-0.84, p<0.05) with the FAMACHA index. BCS tended to decline for infected SU lambs and increased slightly for infected CNCMP lambs. CLWG differed in all groups (p<0.05); infected SU lambs gained 12.1+/-1.9kg, infected CNCMP lambs gained 18.8+/-0.7kg, control SU lambs gained 34.6+/-1.6kg, and control CNCMP lambs gained 26.9+/-0.8kg. In conclusion, CNCMP lambs had a smaller worm burden, a better ability to maintain their productive traits, and were less affected by infection with Haemonchus contortus.

Electromagnetomechanical elastodynamic model for Lamb wave damage quantification in composites

NASA Astrophysics Data System (ADS)

Borkowski, Luke; Chattopadhyay, Aditi

2014-03-01

Physics-based wave propagation computational models play a key role in structural health monitoring (SHM) and the development of improved damage quantification methodologies. Guided waves (GWs), such as Lamb waves, provide the capability to monitor large plate-like aerospace structures with limited actuators and sensors and are sensitive to small scale damage; however due to the complex nature of GWs, accurate and efficient computation tools are necessary to investigate the mechanisms responsible for dispersion, coupling, and interaction with damage. In this paper, the local interaction simulation approach (LISA) coupled with the sharp interface model (SIM) solution methodology is used to solve the fully coupled electro-magneto-mechanical elastodynamic equations for the piezoelectric and piezomagnetic actuation and sensing of GWs in fiber reinforced composite material systems. The final framework provides the full three-dimensional displacement as well as electrical and magnetic potential fields for arbitrary plate and transducer geometries and excitation waveform and frequency. The model is validated experimentally and proven computationally efficient for a laminated composite plate. Studies are performed with surface bonded piezoelectric and embedded piezomagnetic sensors to gain insight into the physics of experimental techniques used for SHM. The symmetric collocation of piezoelectric actuators is modeled to demonstrate mode suppression in laminated composites for the purpose of damage detection. The effect of delamination and damage (i.e., matrix cracking) on the GW propagation is demonstrated and quantified. The developed model provides a valuable tool for the improvement of SHM techniques due to its proven accuracy and computational efficiency.

QEDMOD: Fortran program for calculating the model Lamb-shift operator

NASA Astrophysics Data System (ADS)

Shabaev, V. M.; Tupitsyn, I. I.; Yerokhin, V. A.

2018-02-01

We present Fortran package QEDMOD for computing the model QED operator hQED that can be used to account for the Lamb shift in accurate atomic-structure calculations. The package routines calculate the matrix elements of hQED with the user-specified one-electron wave functions. The operator can be used to calculate Lamb shift in many-electron atomic systems with a typical accuracy of few percent, either by evaluating the matrix element of hQED with the many-electron wave function, or by adding hQED to the Dirac-Coulomb-Breit Hamiltonian.

Analysis of Critically Refracted Longitudinal and Lamb Waves for Stress Characterization

NASA Astrophysics Data System (ADS)

Pei, Ning

The global production of metal, in particular, steel and aluminum keeps increasing. This material is used with various fabrication processes, such as, welding, forging, and rolling that can induce stresses in the material that can subsequently impact product performance and cause phenomena such as cracking and corrosion. When investigating plate materials it is necessary to map both texture and stress under a range of loading conditions. To address these needs a wide range of both destructive and nondestructive tools have been used. One family of methods are those based on ultrasonic measurements that relate ultrasonic velocity to properties, in particular stress. Two particular challenges are faced which are the relative insensitivity of compression and shear waves to stress and that there are also other factors which can also change velocity and these are temperature, texture and grain size. This project focused on an analysis of ultrasonic velocity measurements and specifically ways to improve performance and capabilities for stress characterization. Two approaches were considered and are reported: the critically refracted ultrasonic longitudinal (LCR) wave and higher order Lamb waves. The LCR wave method was modelled and optimized based on the fact that the sensitivity between waves and stress can reach maximum when they propagate in the same direction. However, in reality this wave typically propagates at an angle to stress, which will decrease its sensitivity. This thesis reports a numerical model used to investigate the transducers parameters that can influence the directivity of the LCR wave and hence enable performance optimization when used for industrial applications. An orthogonal test method is used to study the transducer parameters which influence the LCR wave beams and this method provides a design tool that can be used to study and optimize multiple parameter experiments and identify which parameter or parameters are of most significance. The

Focusing guided waves using surface bonded elastic metamaterials

NASA Astrophysics Data System (ADS)

Yan, Xiang; Zhu, Rui; Huang, Guoliang; Yuan, Fuh-Gwo

2013-09-01

Bonding a two-dimensional planar array of small lead discs on an aluminum plate with silicone rubber is shown numerically to focus low-frequency flexural guided waves. The "effective mass density profile" of this type of elastic metamaterials (EMMs), perpendicular to wave propagation direction, is carefully tailored and designed, which allows rays of flexural A0 mode Lamb waves to bend in succession and then focus through a 7 × 9 planar array. Numerical simulations show that Lamb waves can be focused beyond EMMs region with amplified displacement and yet largely retained narrow banded waveform, which may have potential application in structural health monitoring.

Does suckling offer protection to the lamb against Teladorsagia circumcincta infection?

PubMed

Iposu, S O; McAnulty, R W; Greer, A W; Xie, H L; Green, R S; Stankiewicz, M; Sykes, A R

2008-05-31

This study tested the hypothesis that milk has a direct effect on the establishment of infection with Teladorsagia circumcincta, and provides information on the effects of suckling on resilience to infection in young lambs. Of 46 six-week-old twin-born lambs, one from each twin was allowed to continue suckling (S-) and its twin-weaned (W-) while both were concurrently infected with an average of either 0 (-0; n=7/group), 250 (-250; n=8/group) or 1000 (-1000; n=8/group) third stage infective larvae (L3) of T. circumcincta per day, providing six treatment groups. All groups grazed minimally contaminated pasture, and after 42 days were slaughtered for necropsy. Low pasture larval contamination was confirmed in W0 and S0 lambs by faecal egg counts (FEC) of less than 30 eggs per gram (EPG) and burdens of less than 140 worms. There was no difference in FEC between weaned and suckled lambs. Within infection regime, total worm burdens were 55-60% greater in the weaned compared with their suckled counterparts (P=0.05), and represented 27 and 17%, respectively, net establishment of larvae. The greater worm burdens of both groups of weaned animals, which compared with their suckled counterparts, and of those infected with 1000 compared with 250 larvae per day, were associated with shorter female adults that had fewer eggs in utero, perhaps indicating intra-worm population regulation, but highlighting the limitation of FEC in assessing nematode burdens of such young lambs. There was no effect of infection on live weight gain of either weaned or suckled groups and the possibility was raised that, in such young lambs, immune unresponsiveness may be responsible. The major benefit of continued milk consumption appears to lie more in providing nutrients for enhanced growth rather than in improving resilience of the lambs to infection.

Precise Determination of the 1s Lamb Shift in Hydrogen-Like Lead and Gold Using Microcalorimeters

NASA Technical Reports Server (NTRS)

Kraft-Bermuth, S.; Andrianov, V.; Bleile, A.; Echler, A.; Egelhof, P.; Grabitz, P.; Ilieva, S.; Kiselev, O.; Kilbourne, C.; McCammon, D.;

Real-Time Leaky Lamb Wave Spectrum Measurement and Its Application to NDE of Composites

NASA Technical Reports Server (NTRS)

Lih, Shyh-Shiuh; Bar-Cohen, Yoseph

1999-01-01

Numerous analytical and theoretical studies of the behavior of leaky Lamb waves (LLW) in composite materials were documented in the literature. One of the key issues that are constraining the application of this method as a practical tool is the amount of data that needs to be acquired and the slow process that is involved with such experiments. Recently, a methodology that allows quasi real-time acquisition of LLW dispersion data was developed. At each angle of incidence the reflection spectrum is available in real time from the experimental setup and it can be used for rapid detection of the defects. This technique can be used to rapidly acquire the various plate wave modes along various angles of incidence for the characterization of the material elastic properties. The experimental method and data acquisition technique will be described in this paper. Experimental data was used to examine a series of flaws including porosity and delaminations and demonstrated the efficiency of the developed technique.

On the Lamb shift in neutral muonic helium

NASA Astrophysics Data System (ADS)

Amusia, Miron; Karshenboim, Savely; Ivanov, Vladimir

2015-05-01

The neutral muonic helium is an exotic atomic system consisting of an electron, muon and a nucleus. We consider it as a hydrogen-like atom with a compound nucleus that is also hydrogen-like system. There are a number of corrections to the Bohr energy levels, which all can be treated as contributions of generic hydrogen-like theory. While the form of those contributions is the same for all hydrogen-like atoms, their relative numerical importance differs from an atom to an atom. Here, the leading contribution to the electronic Lamb shift in the neutral muonic helium is found in a close analytic form together with the most important corrections. We believe that the Lamb shift in the neutral muonic hydrogen is measurable, at least through a measurement of the electronic 1 s - 2 s transition. We present a theoretical prediction for the 1 s - 2 s transitions with the uncertainty of 2 ppm (4 GHz), as well as for the 2 s - 2 p Lamb shift with the uncertainty of 0.6 GHz.

The effect of breed slaughter weight and nutritional management on cholesterol content of lamb carcasses.

PubMed

Arsenos; Zygoyjannis; Kufidis; Katsaounis; Stamataris

2000-06-01

This study was carried out to assess the effect of breed, sex, post-weaning nutrition, live weight at slaughter and their interactions on the cholesterol content in carcass fat of lambs. The carcasses were obtained from lambs of three indigenous Greek dairy breeds of sheep, the Boutsko (B), Serres (S) and Karagouniko (K) breed. After weaning (at approximately 42 days), the lambs of the three breeds had been reared under different conditions of housing and nutritional management in three consecutive experiments between 1992 and 1994. In experiment 1, lambs (males and females) were individually penned and fed ad libitum on a concentrate ration (11.3MJ Metabolizable Energy (ME)/kg DM and 192g crude protein (CP)/kg DM) together with 100g per day of Lucerne hay (8.3MJ ME/kg DM and 182g CP/kg DM). In experiment 2, lambs (males only) were also individually penned but were fed on three different levels of concentrate and ad libitum on Lucerne hay. In experiment 3, lambs (males only) were initially group fed indoors for 63 days on three different levels of concentrate together with ad libitum Lucerne hay, and thereafter the lambs finished on irrigated, sown pasture (Lolium perrene+Trifolium repens). Lambs were assigned to be slaughtered at one of five standard proportions of estimated mature weight for each breed in experiment 1; at three fixed live weights, common for all breeds in experiment 2 and at two fixed proportions of breed mature weight in experiment 3. The right-hand side of the lamb carcasses was minced and 150 lamb carcasses were selected out of a total of 300 minced carcasses. The concentration of total cholesterol content in carcass fat was determined by HPLC in samples of these 150 lamb carcasses. Mean cholesterol content of carcass fat in the three breeds, B, S and K, extracted from the whole ground carcasses samples, was 3.33, 4.41, 3.34mg/g of carcass fat (s.e.d. 0.18), respectively in experiment 1, whereas this content was 3.42, 4.50, 3.59mg/g of carcass

Organic selenium supplementation increased selenium concentrations in ewe and newborn lamb blood and in slaughter lamb meat compared to inorganic selenium supplementation.

PubMed

Steen, Arvid; Strøm, Turid; Bernhoft, Aksel

2008-03-31

Selenium is part of the antioxidant defence system in animals and humans. The available selenium concentration in soil is low in many regions of the world. The purpose of this study was to evaluate the effect of organic versus inorganic selenium supplementation on selenium status of ewes, their lambs, and slaughter lambs. Ewes on four organic farms were allocated five or six to 18 pens. The ewes were given either 20 mg/kg inorganic selenium as sodium selenite or organic selenium as selenized nonviable yeast supplementation for the two last months of pregnancy. Stipulated selenium concentrations in the rations were below 0.40 mg/kg dry matter. In addition 20 male lambs were given supplements from November until they were slaughtered in March. Silage, hay, concentrates, and individual ewe blood samples were taken before and after the mineral supplementation period, and blood samples were taken from the newborn lambs. Blood samples from ewes and lambs in the same pens were pooled. Muscle samples were taken from slaughter lambs in March. Selenium concentrations were determined by atomic absorption spectrometry with a hydride generator system. In the ANOVA model, selenium concentration was the continuous response variable, and selenium source and farm were the nominal effect variables. Two-sample t-test was used to compare selenium concentrations in muscle samples from the slaughtered lambs that received either organic or inorganic selenium supplements. In all ewe pens the whole blood selenium concentrations increased during the experimental period. In addition, ewe pens that received organic selenium had significantly higher whole blood selenium concentrations (mean 0.28 microg/g) than ewe pens that received inorganic selenium (mean 0.24 microg/g). Most prominent, however, was the difference in their lambs; whole blood mean selenium concentration in lambs from mothers that received organic selenium (mean 0.27 microg/g) was 30% higher than in lambs from mothers that

Scattering matrices of Lamb waves at irregular surface and void defects.

PubMed

Feng, Feilong; Shen, Jianzhong; Lin, Shuyu

2012-08-01

Time-harmonic solution of Lamb wave scattering in a plane-strain waveguide with irregular thickness is investigated based on stair-step discretization and stepwise mode matching. The transfer relations of the transmission matrices and reflection matrices are derived in both directions of the waveguide. With these, an explicit expression of the scattering matrix is derived. When the scattering region of an inner irregular defect is geometrically divided into several parts composed of sub-waveguides with variable thicknesses and void regions with vertical free edges corresponding to the plate surfaces, the scattering matrix of the whole region could then be derived by modal matching along the artificial boundaries, as explicit functions of all the scattering matrices of the sub-waveguides and reflection matrices of the free edges. The effectiveness of the formulation is examined by numerical examples; the calculated scattering coefficients are in good accordance with those obtained from numerical simulation models. Copyright © 2012 Elsevier B.V. All rights reserved.

Time-Frequency Analysis of the Dispersion of Lamb Modes

NASA Technical Reports Server (NTRS)

Prosser, W. H.; Seale, Michael D.; Smith, Barry T.

1999-01-01

Accurate knowledge of the velocity dispersion of Lamb modes is important for ultrasonic nondestructive evaluation methods used in detecting and locating flaws in thin plates and in determining their elastic stiffness coefficients. Lamb mode dispersion is also important in the acoustic emission technique for accurately triangulating the location of emissions in thin plates. In this research, the ability to characterize Lamb mode dispersion through a time-frequency analysis (the pseudo Wigner-Ville distribution) was demonstrated. A major advantage of time-frequency methods is the ability to analyze acoustic signals containing multiple propagation modes, which overlap and superimpose in the time domain signal. By combining time-frequency analysis with a broadband acoustic excitation source, the dispersion of multiple Lamb modes over a wide frequency range can be determined from as little as a single measurement. In addition, the technique provides a direct measurement of the group velocity dispersion. The technique was first demonstrated in the analysis of a simulated waveform in an aluminum plate in which the Lamb mode dispersion was well known. Portions of the dispersion curves of the A(sub 0), A(sub 1), S(sub 0), and S(sub 2)Lamb modes were obtained from this one waveform. The technique was also applied for the analysis of experimental waveforms from a unidirectional graphite/epoxy composite plate. Measurements were made both along, and perpendicular to the fiber direction. In this case, the signals contained only the lowest order symmetric and antisymmetric modes. A least squares fit of the results from several source to detector distances was used. Theoretical dispersion curves were calculated and are shown to be in good agreement with experimental results.

Energy requirements of Texel crossbred lambs.

PubMed

Galvani, D B; Pires, C C; Kozloski, G V; Wommer, T P

2008-12-01

Two trials were conducted to determine the energy requirements of feedlot Texel crossbred lambs. In a comparative slaughter trial, thirty 11/16 Texel x 5/16 Ile de France crossbred noncastrated male lambs, weaned at 42 d of age (16.2 +/- 2.1 kg of shrunk BW; SBW), were used. Five lambs were randomly chosen and slaughtered after 10 d of experimental management and diet adaptation (baseline group). Fifteen lambs then were fed for ad libitum intake and slaughtered at 25, 30, or 35 kg of SBW. The remaining 10 lambs were randomly assigned to 2 levels of DMI, either 70 or 55% of the ad libitum intake, and were slaughtered concomitantly with lambs of the 35 kg of SBW group. Total body N, fat, and energy contents were determined. In a digestibility trial, 6 Texel x Ile de France crossbred lambs (30.4 +/- 2.6 kg of SBW) were housed in metabolic cages and used in a replicated 3 x 3 Latin square experiment to evaluate the energetic value of the diet at different feed intake levels. Net and ME requirements for maintenance were 58.6 and 91 kcal/kg(0.75) of SBW, respectively. Consequently, partial efficiency of energy use for maintenance was 0.64. Body fat content varied from 72.7 to 125.9 g/kg of empty BW, respectively, for 13.1 and 28.2 kg of empty BW. Net energy requirements for growth of lambs at 15 and 35 kg of SBW at an ADG of 250 g were 424 and 553 kcal/d, respectively. Partial efficiency of energy use for growth was 0.47. Texel x Ile de France crossbred growing lambs used in this study showed decreased nutritional requirements than those reported by most nutritional systems.

Volatile Profile of Raw Lamb Meat Stored at 4 ± 1 °C: The Potential of Specific Aldehyde Ratios as Indicators of Lamb Meat Quality

PubMed Central

2018-01-01

The objectives of the present study were: (a) to evaluate the aroma evolution of raw lamb packaged in multi-layer coating film and stored at 4 ± 1 °C, with respect to storage time and (b) to investigate whether specific aldehyde ratios could serve as markers of lamb meat freshness and degree of oxidation. Volatile compounds were determined using headspace solid phase microextraction coupled to gas chromatography/mass spectrometry. Results showed that the most dominant volatiles were 2,2,4,6,6-pentamethyl-heptane, hexanal, 1-octen-3-ol, 1-hexanol, carbon disulfide and p-cymene. Volatile compound content was increased during storage time. However, statistically significant differences were recorded only for hexanal, heptanal, and nonanal (p < 0.05). Additionally, the evolution of aldehydes during storage recorded a positive Pearson’s correlation (r) (p < 0.05), whereas hexanal to nonanal, heptanal to nonanal, octanal to nonanal ratios, along with the sum of aldehydes to nonanal ratio, were positively correlated (r = 0.83–1.00) with the degree of oxidation (mg malonic dialdehyde per kg of lamb meat). A perfect Pearson’s correlation (r = 1) was obtained for the ratio hexanal to nonanal. Therefore, this ratio is proposed as an indicator of lamb meat freshness and overall quality. PMID:29547528

Evaluation of barely visible indentation damage (BVID) in CF/EP sandwich composites using guided wave signals

NASA Astrophysics Data System (ADS)

Mustapha, Samir; Ye, Lin; Dong, Xingjian; Alamdari, Mehrisadat Makki

2016-08-01

Barely visible indentation damage after quasi-static indentation in sandwich CF/EP composites was assessed using ultrasonic guided wave signals. Finite element analyses were conducted to investigate the interaction between guided waves and damage, further to assist in the selection process of the Lamb wave sensitive modes for debonding identification. Composite sandwich beams and panels structures were investigated. Using the beam structure, a damage index was defined based on the change in the peak magnitude of the captured wave signals before and after the indentation, and the damage index was correlated with the residual deformation (defined as the depth of the dent), that was further correlated with the amount of crushing within the core. Both A0 and S0 Lamb wave modes showed high sensitivity to the presence of barely visible indentation damage with residual deformation of 0.2 mm. Furthermore, barely visible indentation damage was assessed in composite sandwich panels after indenting to 3 and 5 mm, and the damage index was defined, based on (a) the peak magnitude of the wave signals before and after indentation or (b) the mismatch between the original and reconstructed wave signals based on a time-reversal algorithm, and was subsequently applied to locate the position of indentation.

Organic selenium supplementation increased selenium concentrations in ewe and newborn lamb blood and in slaughter lamb meat compared to inorganic selenium supplementation

PubMed Central

Steen, Arvid; Strøm, Turid; Bernhoft, Aksel

2008-01-01

Background Selenium is part of the antioxidant defence system in animals and humans. The available selenium concentration in soil is low in many regions of the world. The purpose of this study was to evaluate the effect of organic versus inorganic selenium supplementation on selenium status of ewes, their lambs, and slaughter lambs. Methods Ewes on four organic farms were allocated five or six to 18 pens. The ewes were given either 20 mg/kg inorganic selenium as sodium selenite or organic selenium as selenized nonviable yeast supplementation for the two last months of pregnancy. Stipulated selenium concentrations in the rations were below 0.40 mg/kg dry matter. In addition 20 male lambs were given supplements from November until they were slaughtered in March. Silage, hay, concentrates, and individual ewe blood samples were taken before and after the mineral supplementation period, and blood samples were taken from the newborn lambs. Blood samples from ewes and lambs in the same pens were pooled. Muscle samples were taken from slaughter lambs in March. Selenium concentrations were determined by atomic absorption spectrometry with a hydride generator system. In the ANOVA model, selenium concentration was the continuous response variable, and selenium source and farm were the nominal effect variables. Two-sample t-test was used to compare selenium concentrations in muscle samples from the slaughtered lambs that received either organic or inorganic selenium supplements. Results In all ewe pens the whole blood selenium concentrations increased during the experimental period. In addition, ewe pens that received organic selenium had significantly higher whole blood selenium concentrations (mean 0.28 μg/g) than ewe pens that received inorganic selenium (mean 0.24 μg/g). Most prominent, however, was the difference in their lambs; whole blood mean selenium concentration in lambs from mothers that received organic selenium (mean 0.27 μg/g) was 30% higher than in lambs

Mode Conversion Behavior of Guided Wave in a Pipe Inspection System Based on a Long Waveguide.

PubMed

Sun, Feiran; Sun, Zhenguo; Chen, Qiang; Murayama, Riichi; Nishino, Hideo

2016-10-19

To make clear the mode conversion behavior of S0-mode lamb wave and SH0-plate wave converting to the longitudinal mode guided wave and torsional mode guided wave in a pipe, respectively, the experiments were performed based on a previous built pipe inspection system. The pipe was wound with an L-shaped plate or a T-shaped plate as the waveguide, and the S0-wave and SH0-wave were excited separately in the waveguide. To carry out the objective, a meander-line coil electromagnetic acoustic transducer (EMAT) for S0-wave and a periodic permanent magnet (PPM) EMAT for SH0-wave were developed and optimized. Then, several comparison experiments were conducted to compare the efficiency of mode conversion. Experimental results showed that the T(0,1) mode, L(0,1) mode, and L(0,2) mode guided waves can be successfully detected when converted from the S0-wave or SH0-wave with different shaped waveguides. It can also be inferred that the S0-wave has a better ability to convert to the T(0,1) mode, while the SH0-wave is easier to convert to the L(0,1) mode and L(0,2) mode, and the L-shaped waveguide has a better efficiency than T-shaped waveguide.

Lamb survival, glutathione redox state and immune function of neonates and lambs from periparturient Merino ewes supplemented with rumen-protected methionine.

PubMed

Liu, Shimin; Lei, Jason; Hancock, Serina; Scanlan, Victoria; Broomfield, Steve; Currie, Andrew; Thompson, Andrew

2016-10-01

Wool growth in Merino sheep demands a high level of sulphur amino acids, competing with body growth and the immune system, which may play a role in increasing the risk of lamb mortality. The hypothesis that dietary supplementation of methionine (Met) to Merino ewes during the late stages of pregnancy will improve foetal growth and alter immune competency of ewes and lambs was tested in a total of 120 grazing, pregnant Merino ewes. Sixty ewes were group-supplemented with 6.3 g/d rumen-protected Met (Met-Plus) per sheep from day 111 of pregnancy until day 7 after lambing, and the other 60 animals were used as a non-supplemented Control. Lambs from Met-supplemented ewes tended to be 10% heavier than Control lambs (p = 0.10), which did not affected the survival rate at weaning significantly. The supplemented ewes had slightly higher concentrations of total glutathione (GSH) in plasma at lambing (p < 0.06), but there were no differences between 1 and 3 months post-lambing in GSH, glutathione disulphide (GSSG) and the GSSG:GSH ratio. The GSSG:GSH ratio in the blood of ewes was elevated at lambing (p < 0.05), hinting that ewes were undergoing increased oxidative stress. The Met supplementation elevated the total IgG concentration (p < 0.05) in lambs aged 4 and 6 weeks, but did not change the IgG concentrations in colostrum and in plasma of 1-week-old lambs, and white blood cell counts and leukocyte types. The trend towards higher lamb birth weights in the Met-supplemented group requires further investigation as this may influence survival at birth and weaning.

Methods of localization of Lamb wave sources on thin plates

NASA Astrophysics Data System (ADS)

Turkaya, Semih; Toussaint, Renaud; Kvalheim Eriksen, Fredrik; Daniel, Guillaume; Grude Flekkøy, Eirik; Jørgen Måløy, Knut

2015-04-01

Signal localization techniques are ubiquitous in both industry and academic communities. We propose a new localization method on plates which is based on energy amplitude attenuation and inverted source amplitude comparison. This inversion is tested on synthetic data using Lamb wave propagation direct model and on experimental dataset (recorded with 4 Brüel & Kjær Type 4374 miniature piezoelectric shock accelerometers (1-26 kHz frequency range)). We compare the performance of the technique to the classical source localization algorithms, arrival time localization, time reversal localization, localization based on energy amplitude. Furthermore, we measure and compare the accuracy of these techniques as function of sampling rate, dynamic range, geometry, Signal to Noise Ratio, and we show that this very versatile technique works better than classical ones over the sampling rates 100kHz - 1MHz. Experimental phase consists of a glass plate having dimensions of 80cmx40cm with a thickness of 1cm. Generated signals due to a wooden hammer hit or a steel ball hit are captured by sensors placed on the plate on different locations with the mentioned sensors. Numerical simulations are done using dispersive far field approximation of plate waves. Signals are generated using a hertzian loading over the plate. Using imaginary sources outside the plate boundaries the effect of reflections is also included. This proposed method, can be modified to be implemented on 3d environments, monitor industrial activities (e.g boreholes drilling/production activities) or natural brittle systems (e.g earthquakes, volcanoes, avalanches).

Experimental investigation of leaky lamb modes by an optically induced grating.

PubMed

Van de Rostyne, Kris; Glorieux, Christ; Gao, Weimin; Lauriks, Walter; Thoen, Jan

2002-09-01

By removing the symmetry of a free plate configuration, fluid loading significantly modifies the nature of acoustic waves travelling along a plate, and it even gives existence to new acoustic modes. We present theoretical predictions for the existence, dispersive behavior, and spatial distribution of leaky Lamb waves in a fluid-loaded film. Although Lamb modes are often investigated by studying the radiated fluid waves resulting from their leakage, here their properties are assessed by detecting the wave displacements directly using laser beam deflection. By using crossed laser beam excitation, the detection and analysis of the different modes is done at a fixed wavelength, allowing one to verify the existence, the velocity, and the damping of each predicted mode in a simple and unambiguous way. Our theoretical predictions for the nature of the modes in a water-loaded Plexiglas film, including parts of looping modes, are experimentally confirmed.

The Lamb-shift experiment in Muonic helium

NASA Astrophysics Data System (ADS)

Nebel, T.; Amaro, F. D.; Antognini, A.; Biraben, F.; Cardoso, J. M. R.; Covita, D. S.; Dax, A.; Fernandes, L. M. P.; Gouvea, A. L.; Graf, T.; Hänsch, T. W.; Hildebrandt, M.; Indelicato, P.; Julien, L.; Kirch, K.; Kottmann, F.; Liu, Y.-W.; Monteiro, C. M. B.; Nez, F.; Santos, J. M. F. dos; Schuhmann, K.; Taqqu, D.; Veloso, J. F. C. A.; Voss, A.; Pohl, R.

2012-12-01

We propose to measure several transition frequencies between the 2 S and the 2 P states (Lamb shift) in muonic helium ions ( μ 4He + and μ 3He + ) by means of laser spectroscopy, in order to determine the alpha-particle and helion root-mean-square (rms) charge radius. In addition, the fine and hyperfine structure components will be revealed, and the magnetic moment distribution radius will be determined. The contribution of the finite size effect to the Lamb shift (2 S - 2 P energy difference) in μHe + is as high as 20 %. Therefore a measurement of the transition frequencies with a moderate (for laser spectroscopy) precision of 50 ppm (corresponding to 1/20 of the linewidth) will lead to a determination of the nuclear rms charge radii with a relative accuracy of 3 ×10 - 4 (equivalent to 0.0005 fm). The limiting factor for the extraction of the radii from the Lamb shift measurements is given by the uncertainty of the nuclear polarizability contribution. Combined with an ongoing experiment at MPQ aiming to measure the 1 S - 2 S transition frequency in the helium ion, the Lamb shift measurement in μHe + will lead to a sensitive test of problematic and challenging bound-state QED terms. This measurement will also help to clarify the discrepancy found in our previous μ p experiment. Additionally, a precise knowledge of the absolute nuclear radii of the He isotopes and the hyperfine splitting of μ 3He + provide a relevant test of few-nucleon theories.

The Lamb-shift experiment in Muonic helium

NASA Astrophysics Data System (ADS)

Nebel, T.; Amaro, F. D.; Antognini, A.; Biraben, F.; Cardoso, J. M. R.; Covita, D. S.; Dax, A.; Fernandes, L. M. P.; Gouvea, A. L.; Graf, T.; Hänsch, T. W.; Hildebrandt, M.; Indelicato, P.; Julien, L.; Kirch, K.; Kottmann, F.; Liu, Y.-W.; Monteiro, C. M. B.; Nez, F.; Santos, J. M. F. dos; Schuhmann, K.; Taqqu, D.; Veloso, J. F. C. A.; Voss, A.; Pohl, R.

We propose to measure several transition frequencies between the 2S and the 2P states (Lamb shift) in muonic helium ions (μ 4He + and μ 3He + ) by means of laser spectroscopy, in order to determine the alpha-particle and helion root-mean-square (rms) charge radius. In addition, the fine and hyperfine structure components will be revealed, and the magnetic moment distribution radius will be determined. The contribution of the finite size effect to the Lamb shift (2S - 2P energy difference) in μHe + is as high as 20 %. Therefore a measurement of the transition frequencies with a moderate (for laser spectroscopy) precision of 50 ppm (corresponding to 1/20 of the linewidth) will lead to a determination of the nuclear rms charge radii with a relative accuracy of 3 ×10 - 4 (equivalent to 0.0005 fm). The limiting factor for the extraction of the radii from the Lamb shift measurements is given by the uncertainty of the nuclear polarizability contribution. Combined with an ongoing experiment at MPQ aiming to measure the 1S - 2S transition frequency in the helium ion, the Lamb shift measurement in μHe + will lead to a sensitive test of problematic and challenging bound-state QED terms. This measurement will also help to clarify the discrepancy found in our previous μ p experiment. Additionally, a precise knowledge of the absolute nuclear radii of the He isotopes and the hyperfine splitting of μ 3He + provide a relevant test of few-nucleon theories.

Precision Laser Spectroscopic Measurement of Helium -4(1S2S S(3) to 1S2P P(3)) Lamb Shift and Fine Structure

NASA Astrophysics Data System (ADS)

Dixson, Ronald Gene

This thesis is a presentation of the results of a precise measurement of the absolute wavelength and fine structure splitting of the 1s2s ^3S to 1s2p ^3P transition of the ^4He atom. The experiment described in this thesis is the first one in which laser spectroscopy has been done on the 2 ^3S to 2^3 P transition in a metastable atomic beam. The energy interval between the 2^3S and the 2^3P state is precisely determined by comparison of the absolute wavelength of the transition with our standard laser (an iodine stabilized He-Ne laser with an accuracy of 1.6 parts in 10^{10 }) in a Fabry-Perot interferometer. The experimental Lamb shift of the transition is determined by subtracting from the measured frequency the precisely known non-quantum electrodynamic contributions to the theoretical value of the interval. From our measurements of the absolute wavelength, the following weighted (2J + 1) average for the 2^3S to 2^3P transition frequency and experimental Lamb Shift are obtained:eqalign{& rm f_{2S{-}2P} = 276 736 495.59 (5) rm MHz.cr& {bf L}[ 2^3Sto2 ^3P] = 5311.26 (5) rm MHz.cr} Our value for the Lamb Shift is in agreement with the best previous measurement but a factor of 60 more precise. It is also two orders of magnitude more precise than the present theoretical calculation, presenting quite a challenge to theorists. Nevertheless, this work is very timely since it is anticipated (DRA94) (MOR94) that the theory will reach this level in the near future. The measured fine structure splittings of the 2^3P level are: eqalign{rm 2^3P_0to rm2^3P_2 &: 31908.135 (3) rm MHzcrrm 2^3P_1to rm2^3P_2 &: sk{5}2291.173 (3) rm MHz}These results are more precise than previous microwave measurements and in significant disagreement with them, a situation which is especially timely and interesting since new theoretical calculations of these fine structure intervals (DRA94) at this level of precision are nearing completion.

Comparison of six crossbred lamb types: sensory, physical and nutritional meat quality characteristics.

PubMed

Hoffman, L C; Muller, M; Cloete, S W P; Schmidt, D

2003-12-01

The effect of crossbreeding on lamb meat quality was examined on the M. longissimus dorsi and M. semimembranosus of South African lamb breed combinations. The lambs were sired by Dormer (D) and Suffolk (S) rams and born to Merino (M), Dohne Merino (DM) and SA Mutton Merino (SAMM) ewes to give six breed combinations. Ratings of sensory attributes on the M. semimembranosus of the different lamb breed combinations were obtained from a trained descriptive panel. The moisture, total lipids, protein, ash, mineral content and fatty acid composition of the M. semimembranosus were also obtained. Physical parameters measured on the M. longissimus dorsi were: pH(48), drip loss, cooking loss and Warner-Bratzler shear force (WBS). Breed did not have a significant effect (P>0.05) on the sensory quality of lamb, except for D×SAMM lambs which only showed a significantly higher (P⩽0.05) initial juiciness compared to S×M. However, breed had a significant effect on pH(48), WBS, protein content and the fatty acid and mineral composition.

Study on the application of shear-wave elastography to thin-layered media and tubular structure: Finite-element analysis and experiment verification

NASA Astrophysics Data System (ADS)

Jang, Jun-keun; Kondo, Kengo; Namita, Takeshi; Yamakawa, Makoto; Shiina, Tsuyoshi

2016-07-01

Shear-wave elastography (SWE) enables the noninvasive and quantitative evaluation of the mechanical properties of human soft tissue. Generally, shear-wave velocity (C S) can be estimated using the time-of-flight (TOF) method. Young’s modulus is then calculated directly from the estimated C S. However, because shear waves in thin-layered media propagate as guided waves, C S cannot be accurately estimated using the conventional TOF method. Leaky Lamb dispersion analysis (LLDA) has recently been proposed to overcome this problem. In this study, we performed both experimental and finite-element (FE) analyses to evaluate the advantages of LLDA over TOF. In FE analysis, we investigated why the conventional TOF is ineffective for thin-layered media. In phantom experiments, C S results estimated using the two methods were compared for 1.5 and 2% agar plates and tube phantoms. Furthermore, it was shown that Lamb waves can be applied to tubular structures by extracting lateral waves traveling in the long axis direction of the tube using a two-dimensional window. Also, the effects of the inner radius and stiffness (or shear wavelength) of the tube on the estimation performance of LLDA were experimentally discussed. In phantom experiments, the results indicated good agreement between LLDA (plate phantoms of 2 mm thickness: 5.0 m/s for 1.5% agar and 7.2 m/s for 2% agar; tube phantoms with 2 mm thickness and 2 mm inner radius: 5.1 m/s for 1.5% agar and 7.0 m/s for 2% agar; tube phantoms with 2 mm thickness and 4 mm inner radius: 5.3 m/s for 1.5% agar and 7.3 m/s for 2% agar) and SWE measurements (bulk phantoms: 5.3 m/s ± 0.27 for 1.5% agar and 7.3 m/s ± 0.54 for 2% agar).

The effect of tilmicosin administered to ewes prior to lambing on incidence of clinical mastitis and subsequent lamb performance.

PubMed Central

Croft, A; Duffield, T; Menzies, P; Leslie, K; Bagg, R; Dick, P

2000-01-01

The effect of tilmicosin on the incidence of clinical mastitis and subsequent lamb performance was studied in 9 sheep flocks in Ontario. Ewes were treated randomly with either tilmicosin or placebo approximately one month prior to lambing. Outcome was assessed by comparing rates of clinical mastitis, palpable udder abnormalities, and preweaning (50-day) lamb weights between the 2 treatment groups, while controlling for other important variables. Lambs raised by multiparous ewes treated with tilmicosin were significantly heavier than lambs from placebo-treated multiparous ewes at 50 days. Lambs from tilmicosin-treated ewes were on average 0.52 kg heavier than lambs in the placebo group. There was no difference between treatment groups in the weight of lambs from first parity ewes. Tilmicosin treatment resulted in a 43% decrease in palpable udder abnormalities. Incidence of clinical mastitis did not differ between experimental groups. The administration of tilmicosin prelambing, at the time of routine clostridial disease vaccination, may be a beneficial and convenient way to reduce mastitis infection and improve the preweaning gain of lambs. PMID:10769768

The power flow angle of acoustic waves in thin piezoelectric plates.

PubMed

Kuznetsova, Iren E; Zaitsev, Boris D; Teplykh, Andrei A; Joshi, Shrinivas G; Kuznetsova, Anastasia S

2008-09-01

The curves of slowness and power flow angle (PFA) of quasi-antisymmetric (A(0)) and quasi-symmetric (S(0)) Lamb waves as well as quasi-shear-horizontal (SH(0)) acoustic waves in thin plates of lithium niobate and potassium niobate of X-,Y-, and Z-cuts for various propagation directions and the influence of electrical shorting of one plate surface on these curves and PFA have been theoretically investigated. It has been found that the group velocity of such waves does not coincide with the phase velocity for the most directions of propagation. It has been also shown that S(0) and SH(0) wave are characterized by record high values of PFA and its change due to electrical shorting of the plate surface in comparison with surface and bulk acoustic waves in the same material. The most interesting results have been verified by experiment. As a whole, the results obtained may be useful for development of various devices for signal processing, for example, electrically controlled acoustic switchers.

Sodium chlorate reduces presence of Escherichia coli in feces of lambs and ewes managed in shed-lambing systems

USDA-ARS?s Scientific Manuscript database

Our objective was to establish doses of orally-administered NaClO3 that reduced presence of generic Escherichia coli in intestines of ewes and neonatal lambs managed in a shed-lambing system. Neonatal lambs (n = 32; age = 7.1 ± 1.2 d; BW = 6.8 ± 1.0 kg) and yearling ewes (n = 44; BW = 74.8 ± 5.6 kg)...

Factors affecting fecal egg counts in periparturient Katahdin ewes and their lambs.

PubMed

Notter, D R; Burke, J M; Miller, J E; Morgan, J L M

2017-01-01

Selection for low fecal egg counts (FEC) can be used to genetically enhance resistance to gastrointestinal nematode parasites in growing lambs, thereby reducing the frequency of use of anthelmintics, facilitating marketing of organic lamb, and reducing the risk of development of anthelmintic resistance by the parasite. Recording of FEC in lambs has, therefore, been incorporated into several national sheep genetic evaluation programs. Ewes in late gestation and early lactation are also vulnerable to parasite infection and commonly experience a periparturient rise in FEC. This study was designed to assess factors associated with the periparturient rise in FEC in Katahdin ewes and associated changes in FEC in their lambs. Data came from 1,487 lambings by 931 Katahdin ewes from 11 farms in the Eastern United States. Fecal egg counts were measured in ewes at approximately 0, 30, and 60 d postpartum and in their lambs at approximately 60, 90, and 120 d of age. Approximately 1,400 lambs were evaluated at each measurement age. Data were analyzed separately for ewes and lambs and also initially analyzed separately for each measurement time. Repeated-measures analyses were then used to evaluate responses across measurement times. In ewes, FEC peaked at approximately 28 d postpartum, and we concluded that informative periparturient FEC could be obtained from 1 wk before until approximately 5 wk after lambing. Yearling ewes had higher FEC than adult ewes ( < 0.01), and ewes that nursed twin or triplet lambs had higher FEC than ewes that nursed single lambs ( < 0.01). In lambs, FEC increased through approximately 120 d of age. Lambs from yearling ewes and lambs nursed in larger litters were, like their dams, at greater risk of parasitism ( < 0.05). Ewes and lambs in these groups would benefit from enhanced monitoring of parasite loads at lambing and in early lactation. Correlations () between FEC in lambs at 90 d of age and FEC in ewes at 0, 30, and 60 d postpartum of 0.05 to 0

Age, FSH dose and follicular aspiration frequency affect oocyte yield from juvenile donor lambs.

PubMed

Valasi, I; Leontides, L; Papanikolaou, Th; Amiridis, G S

2007-06-01

Experiments were conducted to determine the effects of lamb age, frequency of follicular aspirations, and hormone stimulation by fixed or variable FSH dose, on the number of collected oocytes and their maturational competence. In trial 1, the characteristics of follicular population (number and diameter of follicles) were studied in 40 lambs which were slaughtered at the age of 30 days (S1), 42 days (S2), 60 days (S3) and 5-6 months (S4), each n = 10. In trial 2, 27 lambs were divided into four groups. group MF lambs (n = 6) had follicular aspiration (OPU) in four monthly intervals commencing from the age of 8-9 weeks (sessions MF1, MF2, MF3 and MF4). In groups SF2, SF3 and SF4 (each n = 6), OPU was conducted once during the 12-13, 16-17 and 20-21 week of age, respectively. Ovarian stimulation was conducted with fixed FSH dose (3.52 mg/animal). In trial 3, 10 lambs (group MV) were treated as those of group MF apart from the FSH dose, which was administered according to the body weight in a dose of 0.27 mg/kg. The number and the size of follicles, the number and the quality of collected oocytes and the maturational competence of the oocytes were compared between and within groups. In trial 1, the total number and the number of small follicles were greater in groups S1 and S2 compared with those of S3 and S4 (p < 0.01). Similarly, the follicular population was greater in group MF1 than in group SF3 (p < 0.01). In sessions MF2, MF3, MV2, MV3 and MV4, more oocytes were collected in comparison with those from the respective once-aspirated age mates (groups SF2, SF3 and SF4). In total, more (p = 0.02) oocytes per donor were collected from group MV (15.2 +/- 5.5) than from group MF (9.0 +/- 3.2). An absolute maturational failure was observed in oocytes collected from groups SF2 and SF3. Maturational competence varied between 16.7% and 58.3% (p = 0.017) among sessions of group MF, but it was more uniform among sessions of group MV (range 12.5-42.9%, p > 0.05). Our results

Genetic parameters for lamb birth weight, survival and death risk traits.

PubMed

Everett-Hincks, J M; Mathias-Davis, H C; Greer, G J; Auvray, B A; Dodds, K G

2014-07-01

This paper reports genetic parameters for lamb survival and mortality traits on sheep farms in New Zealand. Lamb survival and mortality records were obtained from 38 flocks (103,357 lambs) from 5 yr of lambing data (2007 to 2011) and include many breeds and their crosses (predominantly Romney, Perendale, Coopworth, and Texel). A number of models were tested, all including environmental weather effects and investigating the random environmental effect of dam and litter (dam/year) as well as logit transformation for binary traits. Total heritability (direct + maternal) estimates were low for lamb viability at birth (0.01), lamb death risk to dystocia (0.01), and lamb death risk to starvation exposure (0.01) from birth to 3 d of age in an analysis accounting for direct and maternal genetic effects and the maternal environmental effects. Lamb survival heritabilities reported are very low (total heritabilities range from 0.02 to 0.06). The total heritabilities for the lamb death risk traits are lower than reported estimates of survival to 3 d of age or to weaning suggesting selection for the postmortem traits are not warranted at this time within these flocks. The total heritability for lamb birth weight was moderate (0.38) and the genetic correlations with the lamb death risk traits suggested that directional selection on lamb birth weight would have an effect on survival, although it is likely to have a nonlinear effect and therefore an optimum birth weight at which survival is maximized. This study has also shown that the total heritabilities may be overestimated when not accounting for maternal genetic and environment effects and in particular not accounting for the random environmental effect of litter (dam/year).

Carcass composition and meat quality of equally mature kids and lambs.

PubMed

Santos, V A C; Silva, S R; Azevedo, J M T

2008-08-01

Carcass composition and meat quality attributes of 55 suckling kids (27 males and 28 females) and 57 suckling lambs (28 males and 29 females) of Portuguese native breeds were investigated. These suckling kid and lamb meats are European meat quality labels produced according to "Cabrito de Barroso- PGI" and "Borrego Terrincho-PDO" specifications, respectively. Female kids were slaughtered at 9.1 +/- 0.36 kg of BW, and male kids were slaughtered at 10.4 +/- 0.37 kg of BW, corresponding to 20.1 and 17.7% of maturity, respectively. Female lambs were slaughtered at 8.6 +/- 0.53 kg of BW, and male lambs were slaughtered at 9.9 +/- 0.23 kg of BW, corresponding to 19.9 and 17.1% of maturity, respectively. At 24 h postmortem, various yield and quality measurements were collected. The left sides of the carcasses were dissected into muscle, subcutaneous fat, intermuscular fat, and bone. Final pH, instrumental color (L*, a*, b*), carcass measurements, and kidney knob and pelvic fat were also determined. Samples of LM were taken from the lumbar and thoracic cuts for intramuscular and meat quality determinations. At 72 h postmortem, a sample of LM was used for cooking losses and Warner-Bratzler shear force determination. Suckling lambs had greater dressing proportion than suckling kids (P < 0.01). Carcass fatness was not affected by species (P > 0.05), but females had greater kidney knob and pelvic fat proportion than males (P < 0.01). Lambs had greater proportions of the highly valued leg cut and lower proportions of shoulder, anterior rib, and neck cuts than kids. Dissection results indicated that kid carcasses had greater muscle content and lower dissected fat and bone than lambs. Kids had greater (P < 0.001) muscle ultimate pH value than lambs (5.8 +/- 0.02 vs. 5.6 +/- 0.02). Males had greater (P < 0.05) muscle ultimate pH value than females (5.7 +/- 0.02 vs. 5.6 +/- 0.02). The kid meat was significantly lighter (P < 0.05) and less yellow (P < 0.001) than the lamb meat. Kids

Economics of callipyge lamb production.

PubMed

Busboom, J R; Wahl, T I; Snowder, G D

1999-01-01

could increase intermediate-run U.S. profits by $109 million, but the actual effects of CLPG attributes, such as a visual appeal, lower fat and cholesterol content, and reduced seam fat, on consumer demand need to be quantified. If accepted by packers and consumers, moisture-enhanced CLPG lamb has the potential to decrease the cost of lamb to consumers and increase lamb industry profitability.

Response of lamb plasma carotenoid concentration to a shift from a low to a high dietary carotenoid level.

PubMed

de Oliveira, L; Carvalho, P C F; Prache, S

2012-07-01

This study was conducted to investigate the pattern of plasma carotenoid concentration (PCC) in lambs switching from a low to a high dietary carotenoid level. A total of 12 Romane lambs were individually penned indoors and fed a low dietary carotenoid level for 23 days (period 1) and then a high dietary carotenoid level for 15 days (period 2). At the beginning of period 2, the lambs were 15 weeks old and weighed 29.9 kg (s.d. 2.7) on average. Lambs were fed daily (dry matter) 0.558 kg alfalfa pellets, 0.181 kg straw and 0.181 kg barley. Plasma content of total carotenoids was measured daily in period 2 by spectrophotometry. PCC (μg/l) varied with the animal (P < 0.001) and with time elapsed since the beginning of alfalfa distribution (P < 0.001). Mean PCC was 8 μg/l (s.d. 3.3) at the beginning of period 2, then increased curvilinearly with the time elapsed since the beginning of alfalfa distribution. As early as 24 h on the alfalfa diet, PCC was already higher than before the switch (P < 0.001). Mean PCC continued to increase until day 6 on average and reached a plateau thereafter. We propose a monomolecular function to model this pattern, the equation obtained on the mean data being: PCC = 97 (s.e. 2.2) × (1-exp(-0.3378 (s.e. 0.0282)×d)), where r2 = 0.997, r.s.d. = 4.47, n = 15 and d = day. The percentage of variance explained by the model ranged between 95.9% and 99.2%, depending on the animal. The parameters of the monomolecular function varied among animals, confirming the interindividual variability in animal response. Plateau for PCC was reached slightly earlier for the six lambs with the lowest values of the asymptote than for the six lambs with the highest values of the asymptote.

Vitamin E supplementation of undernourished ewes pre- and post-lambing reduces weight loss of ewes and increases weight of lambs.

PubMed

Rosales Nieto, César Augusto; Meza-Herrera, César Alberto; Moron Cedillo, Felipe de Jesús; Flores Najera, Manuel de Jesús; Gámez Vázquez, Hector Guillermo; Ventura Pérez, Felipe de Jesús; Liu, Shimin

2016-03-01

The aim of this study was to test if vitamin E supplementation during late gestation and early lactation would affect the weight of ewes under nutritional restriction and the performance of their lambs. Mature Rambouillet ewes (n = 37) were fed a diet that supplied 70 % of the energy and 80 % of recommended protein requirements and randomly assigned to either vitamin E (vit E, n = 20, 4 IU of α-tocopherol kg(-1) of live weight) or control (n = 17, without vitamin E supplementation). During the experimental period, the mean weight of ewes decreased from 74.6 ± 2.4 to 58.1 ± 2.2 kg. Weight loss of ewes was slightly less for the vit E than the control (-65 vs -124 g day(-1), SEM = 46; P = 0.07). Lambs born from vit E-supplemented ewes were heavier than lambs from the control and grew significantly faster (239 vs 195 g day(-1), SEM = 29.3, P < 0.05) with heavier weights at weaning (16.5 vs 13.5 kg, SEM = 1.8, P < 0.05). Besides, birth weight, weaning weight and daily weight gain favoured to single lambs and to male lambs (P < 0.05). Weaning weight was positively correlated to birth weight (P < 0.05) and weight gain (P < 0.001). When the nutrient requirements for ewes are not met, supplementation of vitamin E during late gestation and early lactation might be an effective strategy to minimise ewe weight loss as well as to increase lamb growth.

Immunization of lambs with the S48 strain of Toxoplasma gondii reduces tissue cyst burden following oral challenge with a complete strain of the parasite.

PubMed

Katzer, Frank; Canton, German; Burrells, Alison; Palarea-Albaladejo, Javier; Horton, Ben; Bartley, Paul M; Pang, Yvonne; Chianini, Francesca; Innes, Elisabeth A; Benavides, Julio

2014-09-15

This study evaluates the influence of immunizing lambs with the incomplete S48 strain of Toxoplasma gondii, on parasite dissemination following a live oral challenge with a complete strain of T. gondii (M4). Lambs were culled at 14, 28 and 42 days post challenge. Parasite DNA was detected at significantly (p<0.0001) lower levels in samples from the vaccinated/challenged group (0% in heart and 5.9% in skeletal muscles), when compared to the non-vaccinated/challenged animals (75% heart, 87.9% skeletal muscle). S48 T. gondii DNA was found in muscle or lymph nodes until 42 days post infection, suggesting that parasite DNA or tachyzoites could persist longer after immunization than previously thought. Non-vaccinated/challenged animals showed more frequent lesions in muscles and central nervous system than the vaccinated animals. These results demonstrate that vaccination of lambs with the incomplete S48 T. gondii strain, can protect against establishment of tissue cysts following challenge with a complete strain of T. gondii. Consumption of undercooked meat containing T. gondii cysts is a major route of transmission to people, therefore vaccination of food animals may improve the safety of meat for human consumption. Copyright © 2014 Elsevier B.V. All rights reserved.

Smart Sound Processing for Defect Sizing in Pipelines Using EMAT Actuator Based Multi-Frequency Lamb Waves

PubMed Central

García-Gómez, Joaquín; Rosa-Zurera, Manuel; Romero-Camacho, Antonio; Jiménez-Garrido, Jesús Antonio; García-Benavides, Víctor

2018-01-01

Pipeline inspection is a topic of particular interest to the companies. Especially important is the defect sizing, which allows them to avoid subsequent costly repairs in their equipment. A solution for this issue is using ultrasonic waves sensed through Electro-Magnetic Acoustic Transducer (EMAT) actuators. The main advantage of this technology is the absence of the need to have direct contact with the surface of the material under investigation, which must be a conductive one. Specifically interesting is the meander-line-coil based Lamb wave generation, since the directivity of the waves allows a study based in the circumferential wrap-around received signal. However, the variety of defect sizes changes the behavior of the signal when it passes through the pipeline. Because of that, it is necessary to apply advanced techniques based on Smart Sound Processing (SSP). These methods involve extracting useful information from the signals sensed with EMAT at different frequencies to obtain nonlinear estimations of the depth of the defect, and to select the features that better estimate the profile of the pipeline. The proposed technique has been tested using both simulated and real signals in steel pipelines, obtaining good results in terms of Root Mean Square Error (RMSE). PMID:29518927

Description of development of rumen ecosystem by PCR assay in milk-fed, weaned and finished lambs in an intensive fattening system.

PubMed

Belanche, A; Balcells, J; de la Fuente, G; Yañez-Ruíz, D R; Fondevila, M; Calleja, L

2010-10-01

This study examined the reticulo-rumen characteristics of the microbial community and its fermentative characteristics in milk-fed, at weaning and finished lambs in a conventional fattening system. Five lambs were assigned to each of three groups: milk-fed lambs slaughtered at 30 days (T30), weaned lambs slaughtered at 45 days (T45) and 'finished lambs' slaughtered at 90 days (T90). At slaughter, rumen size, fermentation parameters (pH, volatile fatty acids and microbial enzyme activity) and protozoal counts were recorded. Quantitative PCR was used to quantify the genes encoding 16S and 18S ribosomal DNA of the rumen bacterial and protozoal populations, respectively, and the sequential colonization of the rumen by cellulolytic (Ruminococcus albus, Ruminococcus flavefaciens) and amylolytic (Prevotella ruminicola, Streptococcus bovis) bacteria, and protozoa (Entodinium sp.). Denaturing gradient gel electrophoresis was used to study the development of rumen microbiota biodiversity. Intake of solid food before weaning caused a significant increase in rumen weight (p < 0.0001) and bacterial DNA (p < 0.05) and volatile fatty acid analysis concentration (p < 0.01), whereas pH declined. In milk-fed lambs, cellulolytic bacteria were evident after 30 days. Thereafter, in the 45-day and 90-day groups, the proportions of R. flavefaciens decreased and R. albus increased. Amylolytic bacteria were present in milk-fed lambs; the proportion of P. ruminicola increased in fattening lambs and S. bovis was the least abundant species. Protozoal concentrations were irregular; milk-fed lambs had a significant number of protozoa species from Entodinium and subfamily Isotrichiidae, but they disappeared at weaning. Lamb rumen were refaunated in some individuals at 90 days (Entodinium and subfamily Diplodiniinae spp.), although individual concentrations were variable. © 2009 Blackwell Verlag GmbH.

Effectiveness of a short-term treatment with progesterone injections on synchrony of lambing and fertility in tropical hair sheep.

PubMed

Knights, Marlon; Ramgattie, Reeza; Siew, Narendra; Singh-Knights, Doolarie; Bourne, Gregory

2011-06-01

The efficacy of using a low cost system for delivering progesterone as part of an estrous synchronization protocol in sheep was evaluated. In experiment 1, Barbados Black Belly ewes (n=34) and ewe lambs (n=35; 37.5±0.9 kg) were assigned to be untreated, control animals (C), or to receive PGF(2α) on d0 (PG), or receive two injections of progesterone (200mg, i.m. each) on D -5 and on D -2.5, prior to PGF(2α), on D 0 (2PPG). Treatment with 2PPG increased the proportion of animals lambing to the first service (P<0.05), an effect that was greater in ewe lambs than ewes (treatment × parity; P<0.05). The interval from ram introduction to lambing and the mean lambing day was less (P=0.04) in the 2PPG-treated animals compared to control animals. In Experiment 2, lactating ewes from experiment 1 (n=61) 60-85 days postpartum were assigned within parity and number of lambs reared to remain nursing (S; n=29) or weaned (W; n=32) 3 weeks prior to treatment with the 2PPG protocol. There was no effect of treatment on the proportion of animals lambing to the first service or overall, interval from ram introduction to lambing and lambing interval. An 8-month lambing interval was observed in ewes in which estrus was synchronized regardless of physiological state. In conclusion, the two-progesterone injection synchronization protocol may be used as a practical low cost and efficient method of synchronizing estrus to reduce the lambing interval and maximize productivity in tropical breeds of sheep. Copyright © 2011 Elsevier B.V. All rights reserved.

Development of an ultrasonic inspection robot using an electromagnetic acoustic transducer for a Lamb wave and an SH-plate wave.

PubMed

Murayama, Riichi; Makiyama, Shunnichi; Kodama, Mitutoshi; Taniguchi, Yasutoshi

2004-04-01

For inspection of a storage tank and pipeline in service, the application of an automatic inspection system (nondestructive inspection robot) is desirable, because manual inspection is difficult to perfectly and exactly perform due to the enormous amount of inspection needed. However, an ultrasonic nondestructive inspection robot with a piezoelectric oscillator needs to touch only the material surface to be directly inspected using a coupling medium. That is, the material surface and the sensor must always be held by constant pressure in the vertical direction on the material side. Actually, it is difficult to overcome these problems; thus an ultrasonic inspection robot could not be widely applied. We then tried to develop an ultrasonic inspection robot with an electromagnetic acoustic transducer (EMAT) which did not require a coupling medium to inspect the circumferential pipe parts. We developed a special EMAT that could transmit and receive alternately a Lamb wave with high sensitivity and a SH-plate wave without influence by the welded part. The method by which the inspection robot turned around the direction of the steel pipe surroundings was executed by observing the tape pasted in the direction of the steel pipe surroundings with an installed CCD camera. In this report, the basic mechanism of this inspection robot and an examination of results are described.

Partial replacement of barley grain and soybean meal by fleabane (Conyza bonariensis) in diets of growing Awassi lambs.

PubMed

Abo Omar, J M; Omar, M

2012-07-01

Effects of partial substitution of barley grain and soybean meal with fleabane (FB) Conyza bonariensis on growth performances and body compositions of 24 male local Awassi lambs were studied. All lambs were male with an average BW of 20.3 kg (s.d. = 2.0 kg) at the beginning of the experiment. Animals were randomly divided into four groups of six lambs each. Lambs in each group received individually their cereal-soybean-based total mixed rations with levels of FB: 0, 50, 100 and 150 g/kg dry matter (DM) diet, which replaced similar values of barley and soybean meal. All rations were isonitrogenous and isocaloric. The fattening experiment lasted 9 weeks, after which all lambs were slaughtered. The composition of nutrients in the C. bonariensis were 89.6%, 15.0%, 28.0%, 30.0% and 10% for organic matter, CP, NDF, ADF and lignin, respectively. At the end of the experiment, lambs fed 100 and 150 g FB/kg DM diets gained more weight (P < 0.05) than those fed the control and 50 g FB/kg DM diets. The DM intake was lower in lambs fed the highest level of FB compared with intakes of lambs in other treatments. Diet content of FB had significant effect (P < 0.05) on weights of empty body, carcass, gut and external (hide, head and feet) among all animals. However, FB had no effects on lambs' thoracic organs (lungs and heart) and liver. Muscle, bone, omental and mesenteric fat, subcutaneous, intermuscular, pelvic and kidney fat weights (g/kg empty BW) were not affected by FB feeding. Carcass fat was decreased (P < 0.05) by the increase of FB. Total body fat was the same in all animals of the experiment.

Modeling the high-frequency complex modulus of silicone rubber using standing Lamb waves and an inverse finite element method.

PubMed

Jonsson, Ulf; Lindahl, Olof; Andersson, Britt

2014-12-01

To gain an understanding of the high-frequency elastic properties of silicone rubber, a finite element model of a cylindrical piezoelectric element, in contact with a silicone rubber disk, was constructed. The frequency-dependent elastic modulus of the silicone rubber was modeled by a fourparameter fractional derivative viscoelastic model in the 100 to 250 kHz frequency range. The calculations were carried out in the range of the first radial resonance frequency of the sensor. At the resonance, the hyperelastic effect of the silicone rubber was modeled by a hyperelastic compensating function. The calculated response was matched to the measured response by using the transitional peaks in the impedance spectrum that originates from the switching of standing Lamb wave modes in the silicone rubber. To validate the results, the impedance responses of three 5-mm-thick silicone rubber disks, with different radial lengths, were measured. The calculated and measured transitional frequencies have been compared in detail. The comparison showed very good agreement, with average relative differences of 0.7%, 0.6%, and 0.7% for the silicone rubber samples with radial lengths of 38.0, 21.4, and 11.0 mm, respectively. The average complex elastic moduli of the samples were (0.97 + 0.009i) GPa at 100 kHz and (0.97 + 0.005i) GPa at 250 kHz.

The effects of feeding clinoptilolite on hematology, performance, and health of newborn lambs.

PubMed

Norouzian, M A; Valizadeh, R; Khadem, A A; Afzalzadeh, A; Nabipour, A

2010-11-01

The effects of feeding clinoptilolite on hematology, performance, and health of newborn Balouchi lambs were evaluated in this experiment. In a completely randomized design, 30 newborn lambs were allocated to three groups and fed by basal diet (C0; without clinoptilolite) and C1 and C2 (the basal diet plus 1.5% and 3% clinoptilolite, respectively, for 6 weeks (3 weeks before and 3 weeks after weaning)). Blood samples were taken from all lambs, at the time when the animals were allocated to the experimental diet and at the end of each week of experiment, and analyzed for hematology, plasma fibrinogen, and total protein. Performance and health of all lambs were measured. Fecal consistency score and diarrhea severity were evaluated. There was no difference between lambs in case of hematological parameters. Lambs fecal consistency score and severity of diarrhea were lowest (P < 0.05) for lambs on C1 and C2 and highest for lambs on C0. Dry matter intake and feed conservation ratio were similar between the groups of lambs fed by different diets, but daily gain of lambs differed significantly (P < 0.05) and was higher in C2. It was concluded that addition of 3% clinoptilolite to starter diet of newborn lamb can reduce incidence and severity of diarrhea, although its effect on hematology and performance was negligible.

First pure frequency measurement of an optical transition in helium: Lamb shift on the 23S1 metastable level

NASA Astrophysics Data System (ADS)

Pavone, F. S.; Marin, F.; de Natale, P.; Inguscio, M.; Biraben, F.

1994-07-01

The 23S1-33P40He transition at λ0=389 nm is measured with respect to a previously frequency calibrated 87Rb two-photon transition at 2λ0=778 nm. The 4He absolute frequency is 770 732 839 058 (190) kHz, with an accuracy of 2.4 parts in 1010. A Lamb shift value of +4057.61 (79) MHz, with 600 kHz uncertainty arising from the theoretical position of the 33P0 energy level, is extracted for the 23S1 level. This value is more than 2 orders of magnitude more accurate than the current best theoretical predictions.

Effect of sustained inflation duration; resuscitation of near-term asphyxiated lambs.

PubMed

Klingenberg, Claus; Sobotka, Kristina S; Ong, Tracey; Allison, Beth J; Schmölzer, Georg M; Moss, Timothy J M; Polglase, Graeme R; Dawson, Jennifer A; Davis, Peter G; Hooper, Stuart B

2013-05-01

The 2010 ILCOR neonatal resuscitation guidelines do not specify appropriate inflation times for the initial lung inflations in apnoeic newborn infants. The authors compared three ventilation strategies immediately after delivery in asphyxiated newborn lambs. Experimental animal study. Facility for animal research. Eighteen near-term lambs (weight 3.5-3.9 kg) delivered by caesarean section. Asphyxia was induced by occluding the umbilical cord and delaying ventilation onset (10-11 min) until mean carotid blood pressure (CBP) was ≤22 mm Hg. Animals were divided into three groups (n=6) and ventilation started with: (1) inflation times of 0.5 s at a ventilation rate 60/min, (2) five 3 s inflations or (3) a single 30 s inflation. Subsequent ventilation used inflations at 0.5 s at 60/min for all groups. Times to reach a heart rate (HR) of 120 bpm and a mean CBP of 40 mm Hg. Secondary outcome was change in lung compliance. Median time to reach HR 120 bpm and mean CBP 40 mm Hg was significantly shorter in the single 30 s inflation group (8 s and 74 s) versus the 5×3 s inflation group (38 s and 466 s) and the conventional ventilation group (64 s and 264 s). Lung compliance was significantly better in the single 30 s inflation group. A single sustained inflation of 30 s immediately after birth improved speed of circulatory recovery and lung compliance in near-term asphyxiated lambs. This approach for neonatal resuscitation merits further investigation.

7 CFR 1280.111 - Lamb.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb. 1280.111 Section 1280.111 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means...

Lamb survival analysis from birth to weaning in Iranian Kermani sheep.

PubMed

Barazandeh, Arsalan; Moghbeli, Sadrollah Molaei; Vatankhah, Mahmood; Hossein-Zadeh, Navid Ghavi

2012-04-01

Survival records from 1,763 Kermani lambs born between 1996 and 2004 from 294 ewes and 81 rams were used to determine genetic and non-genetic factors affecting lamb survival. Traits included were lamb survival across five periods from birth to 7, 14, 56, 70, and 90 days of age. Traits were analyzed under Weibull proportional hazard sire models. Several binary analyses were also conducted using animal models. Statistical models included the fixed class effects of sex of lamb, month and year of birth, a covariate effect of birth weight, and random genetic effects of both sire (in survival analyses) and animal (in binary analyses). The average survival to 90 days of age was 94.8%. Hazard rates ranged from 1.00 (birth to 90 days of age) to 1.73 (birth to 7 days of age) between the two sexes indicating that male lambs were at higher risk of mortality than females (P < 0.01). This study also revealed a curvilinear relationship between lamb survival and lamb birth weight, suggesting that viability and birth weight could be considered simultaneously in the selection programs to obtain optimal birth weight in Kermani lambs. Estimates of heritabilities from survival analyses were medium and ranged from 0.23 to 0.29. In addition, heritability estimates obtained from binary analyses were low and varied from 0.04 to 0.09. The results of this study suggest that progress in survival traits could be possible through managerial strategies and genetic selection.

Effect of morning vs. afternoon grazing on intramuscular fatty acid composition in lamb.

PubMed

Vasta, Valentina; Pagano, Renato Italo; Luciano, Giuseppe; Scerra, Manuel; Caparra, Pasquale; Foti, Francesco; Cilione, Caterina; Biondi, Luisa; Priolo, Alessandro; Avondo, Marcella

2012-01-01

The aim of this study was to assess whether different grazing management affect animal performance and meat fatty acid composition. Thirty-five lambs were divided into three groups: 12 lambs grazed from 9 am to 5 pm (8 h group); 11 lambs grazed from 9 am to 1 pm (4hAM group) and 12 lambs grazed from 1 pm to 5 pm (4hPM group). The trial was conducted over 72 days. The 8 h lambs had greater DMI (P<0.0005) and final body weight (P<0.05) than the 4hPM and 4hAM lambs while carcass weight was not different between the three groups. The meat of the 4hPM lambs contained greater (P<0.05) percentages of polyunsaturated fatty acids, C18:2 cis-9 trans-11 and lower saturated fatty acids and C18:0 than the meat of the 8 h and 4hAM lambs. It is concluded that allowing lambs to graze during the afternoon rather than during 8 h does not compromise the carcass yield and results in a healthier meat fatty acid profile. Copyright © 2011 Elsevier Ltd. All rights reserved.

Management of maternal-offspring behavior to improve lamb survival in easy care sheep systems.

PubMed

Everett-Hincks, J M; Dodds, K G

2008-04-01

This paper examines the environmental and management factors affecting lamb survival on high-performing sheep farms in New Zealand. Improved lambing percentage is the biggest contributor to higher profits on New Zealand sheep farms. Many sheep breeders have selected and bred ewes for increased fecundity over the last 4 decades. The increased proportion of ewes having triplets is of concern to farmers and to industry because neonatal lamb mortality is highest in triplets. The majority of lamb deaths occur in the first 3 d after birth and range from 5 to 30% for individual sheep flocks. The ability of a lamb to survive to weaning is determined by genetics, behavior, physiology, and the environment, including on-farm management practices. We investigated the effects of dam body condition in pregnancy, weather during lambing, lamb birth weight, and maternal behavior on single, twin, and triplet lamb viability at birth, lamb death risks from dystocia, and starvation exposure and survival through to weaning for 20 industry flocks from 2003 to 2004 (15,821 lambs). Ewes with higher body condition scores in mid pregnancy had heavier lambs at birth (P < 0.01). Lambs weighing 5.5 to 6 kg at birth (P < 0.01) were more likely to be viable at birth and survive to weaning than heavier or lighter lambs. Weather conditions during late pregnancy (P < 0.05) proved more important than conditions during lambing (P < 0.05) in determining lamb viability and survival through to weaning. Older ewes and ewes with triplets require considerably more attention for farmers to realize their production potential. This information can help formulate appropriate management programs to improve lamb survival rates under easy care farming systems.

Effects of early human handling on the pain sensitivity of young lambs.

PubMed

Guesgen, Mirjam J; Beausoleil, Ngaio J; Stewart, Mairi

2013-01-01

Pain sensitivity of lambs changes over the first weeks of life. However, the effects of early treatments such as human handling on pain sensitivity are unknown for this species. This study investigated the effects of regular early gentle human handling on the pain sensitivity of lambs, indicated by their behavioural responses to tail docking. Prospective part-blinded experimental study. Twenty-nine singleton Coopworth lambs (females n=14, males n=15). Starting at one day of age, lambs were either handled twice daily for 2 weeks (Handled), were kept in the presence of lambs who were being handled but were not handled themselves (Presence), or were exposed to a human only during routine feeding and care (Control). At 3 weeks of age, all lambs were tail docked using rubber rings. Changes in behaviour due to docking were calculated and change data were analyzed using two-way anova with treatment and test pen as main factors. All lambs showed significant increases in the frequency and duration of behaviours indicative of pain, including 'abnormal' behaviours, and decreases in the frequency and duration of 'normal' behaviours after docking. Handled lambs showed a smaller increase in the time spent lying abnormally after docking than did Control lambs (mean transformed change in proportion of 30 minutes spent±SE: Control 0.55±0.04; Handled 0.38±0.03; Presence 0.48±0.03; C versus H t=3.45, p=0.007). These results provide some evidence that handling early in life may reduce subsequent pain sensitivity in lambs. While the behavioural effects of handling on pain behaviour were subtle, the results suggest, at the very least, that early handling does not increase pain sensitivity in lambs and suggests there is still flexibility postnatally in the pain processing system of a precocial species. © 2012 The Authors. Veterinary Anaesthesia and Analgesia. © 2012 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

Damage imaging using Lamb waves for SHM applications

NASA Astrophysics Data System (ADS)

Stepinski, Tadeusz; Ambroziński, Łukasz; Uhl, Tadeusz

2015-03-01

2-D ultrasonic arrays, due to their beam-steering capability and all azimuth angle coverage are a very promising tool for the inspection of plate-like structures using Lamb waves (LW). Contrary to the classical linear phased arrays (PAs) the 2D arrays enable unequivocal defect localization and they are even capable of mode selectivity of the received LWs . Recently, it has been shown that multistatic synthetic focusing (SF) algorithms applied for 2D arrays are much more effective than the classical phase array mode commonly used in NDT. The multistatic SF assumes multiple transmissions of elements in a transmitting aperture and off-line processing of the data acquired by a receiving aperture. In the simplest implementation of the technique, only a single multiplexed input and a number of output channels are required, which results in significant hardware simplification compared with the PA systems. On the one hand implementation of the multistatic SF to 2D arrays creates additional degrees of freedom during the design of the array topology, which complicates the array design process. On the other hand, it enables designing sparse arrays with performance similar to that of the fully populated dense arrays. In this paper we present a general systematic approach to the design and optimization of imaging systems based on the 2D array operating in the multistatic mode. We start from presenting principles of the SF schemes applied to LW imaging. Then, we outline the coarray concept and demonstrate how it can be used for reducing number of elements of the 2D arrays. Finally, efficient tools for the investigation and experimental verification of the designed 2D array prototypes are presented. The first step in the investigation is theoretical evaluation performed using frequency-dependent structure transfer function (STF), which enables approximate simulation of an array excited with a tone-burst in a dispersive medium. Finally, we show how scanning laser vibrometer

Sericea lespdeza as an aid in the control of Emeria spp. in lambs.

PubMed

Burke, J M; Miller, J E; Terrill, T H; Orlik, S T; Acharya, M; Garza, J J; Mosjidis, J A

2013-03-31

The objective was to examine the effects of feeding sericea lespedeza leaf meal (SL) on control of coccidiosis in lambs. In Exp. 1, naturally infected lambs (n=76) were weaned (102.7±1.4 d of age) in May (spring) and randomly assigned in a 2×2 factorial design to receive 2% of BW/d of alfalfa pellets (control) or SL with or without amprolium added to drinking water (n=38/level or 19/treatment). Fecal oocyst counts (FOC), egg counts (FEC), and fecal score (1=solid pellets; 5=slurry) were determined every 7d between weaning and 21 d post-weaning. In Exp. 2, twin rearing ewes were randomly assigned to two groups, and their naturally infected lambs were fed a control creep supplement (16% CP; n=40) or SL pellets (14% CP; n=32) 30 d before weaning. Intake of SL was initially low (100g/lamb daily) and increased to 454 g/lamb daily after weaning. Lambs were weaned at 103.6±0.9 d of age and moved to semi-confinement. The FEC, FOC, packed cell volume (PCV), fecal score, and dag score (soiling around rear of lamb; 1=no soiling; 5=heavy soiling) were determined at d -14, 0 (weaning), 7, 14, and 21. In Exp. 3, lambs were randomly assigned to a control or SL diet (n=12/diet) fed at 1.4 kg/d for 22d and inoculated with 50,000 sporulated oocysts on d 8, 11, and 13. The FEC, FOC, and fecal score were determined every 2 to 3d between d 1 and 29 (d 0=first day of dietary treatment). Data on all experiments were analyzed using mixed models. The FOC and FEC data were log transformed. Chi squared analysis was used to determine differences in incidence of treatment (sulfadimethoxine) for coccidiosis in Exp. 1 and 2. In Exp. 1, FOC and FEC were similar between dietary groups, and FOC declined more rapidly in amprolium treated lambs following weaning (P<0.001). Fecal score was higher in the control compared with the SL fed lambs (P=0.05), suggesting more signs of coccidiosis in control lambs. In Exp. 2, FOC was similar initially but was reduced in SL fed lambs by weaning and remained

Consumer Perception of the Quality of Lamb and Lamb Confit

PubMed Central

2018-01-01

The patterns of food consumption in general and those of meat, in particular, are constantly changing. These changes are due not only to socioeconomic and cultural trends that affect the whole society but also to the specific lifestyles of consumer groups. Due to the importance of consumer lifestyle, the objectives of this study were (i) to identify the profiles of lamb meat consumers according to their orientation toward convenience, as defined by their eating and cooking habits; (ii) to characterize these profiles according to their socioeconomic characteristics and their preferences regarding the intrinsic and extrinsic quality signals of lamb meat; and (iii) to analyze the willingness to pay for lamb confit. In this study, four types of consumers have been differentiated according to their lifestyles related to lamb consumption. These groups, due to their characteristics, could be called “Gourmet”, “Disinterested”, “Conservative”, and “Basic”. The Gourmet group has characteristics that make it especially interesting to market a product such as lamb confit. However, this group is unaware of this product. Therefore, a possible strategy to expand the commercialization of light lamb and the confit product would be guided marketing to this niche market. PMID:29786652

Consumer Perception of the Quality of Lamb and Lamb Confit.

PubMed

Ripoll, Guillermo; Joy, Margalida; Panea, Begoña

2018-05-22

The patterns of food consumption in general and those of meat, in particular, are constantly changing. These changes are due not only to socioeconomic and cultural trends that affect the whole society but also to the specific lifestyles of consumer groups. Due to the importance of consumer lifestyle, the objectives of this study were (i) to identify the profiles of lamb meat consumers according to their orientation toward convenience, as defined by their eating and cooking habits; (ii) to characterize these profiles according to their socioeconomic characteristics and their preferences regarding the intrinsic and extrinsic quality signals of lamb meat; and (iii) to analyze the willingness to pay for lamb confit. In this study, four types of consumers have been differentiated according to their lifestyles related to lamb consumption. These groups, due to their characteristics, could be called "Gourmet", "Disinterested", "Conservative", and "Basic". The Gourmet group has characteristics that make it especially interesting to market a product such as lamb confit. However, this group is unaware of this product. Therefore, a possible strategy to expand the commercialization of light lamb and the confit product would be guided marketing to this niche market.

Design and characterization of an ultrasonic lamb-wave power delivery system.

PubMed

Kural, Aleksander; Pullin, Rhys; Holford, Karen; Lees, Jonathan; Naylon, Jack; Paget, Christophe; Featherston, Carol

2013-06-01

In this paper, a novel design for an ultrasonic power transmission system designed for use in aircraft structural monitoring systems is described. The prototype system uses ultrasonic Lamb waves to carry energy along plates, such as those used in aircraft structures, and commercially available piezoelectric patch transducers as the transmitter and receiver. This sets it apart from other acoustic power transmission systems reported to date. The optimum configuration transmitted 12.7 mW of power across a distance of 54 cm in a 1.5-mm-thick aluminum plate, while being driven by a 20-Vpp, 35-kHz sinusoidal electric signal. This is in the same order of magnitude as the power required by the wireless sensors nodes of a structural health monitoring system currently being developed by Cardiff University and its partners. Thus, the power transmission system can be considered a viable component of the power source combination considered for the sensor nodes, which will also include vibration and thermal energy harvesting. The paper describes the design and optimization of the transmission and reception circuits with the use of inductive compensation. The use of laser vibrometry to characterize the transducers and to understand the signal propagation between them is also reported.

Effect of thiamine concentration on animal health, feedlot performance, carcass characteristics, and ruminal hydrogen sulfide concentrations in lambs fed diets based on 60% distillers dried grains plus solubles.

PubMed

Neville, B W; Schauer, C S; Karges, K; Gibson, M L; Thompson, M M; Kirschten, L A; Dyer, N W; Berg, P T; Lardy, G P

2010-07-01

Limited data are available regarding the influence of thiamine supplementation on the incidence of polioencephalomalacia (PEM) in lambs fed diets containing increased concentrations of S in the diet (>0.7%). Therefore, our objective was to evaluate the influence of thiamine supplementation on feedlot performance, carcass quality, ruminal hydrogen sulfide gas concentrations, and incidence of PEM in lambs fed a finishing diet containing 60% distillers dried grains with solubles (DDGS; DM basis). Two studies were conducted using completely randomized designs to evaluate the influence of concentration of thiamine supplementation. Study 1 used 240 lambs fed in 16 pens, whereas study 2 used 55 individually fed lambs. Lamb finishing diets contained 60% DDGS, which resulted in a dietary S concentration of 0.73% (DM basis). Treatments diets were based on the amount of supplemental thiamine provided: 1) no supplemental thiamine (CON), 2) 50 mg/animal per day (LO), 3) 100 mg/animal per day (MED), or 4) 150 mg/animal per day (HI). Additionally, in study 2, a fifth treatment was included, which contained 0.87% S (DM basis; increased S provided by addition of dilute sulfuric acid) and provided 150 mg of thiamine/animal per day (HI+S). In study 1, ADG decreased quadratically (P = 0.04), with lambs fed the CON, LO, and MED diets gaining BW at a greater rate than lambs fed the HI diet. In study 1, DMI responded quadratically (P < 0.01), whereas G:F tended to differ linearly (P = 0.08) to concentration of thiamine supplementation, with MED lambs having greater DMI and decreased G:F. No differences (P > or = 0.17) in lamb performance were observed in study 2. In both studies, most carcass characteristics were unaffected, with the exception of a tendency for decreased carcass conformation (study 1; P = 0.09) and greater flank streaking (study 2; P = 0.03). No differences in ruminal hydrogen sulfide concentration (P > 0.05) among treatments were apparent until d 10, at which point

Impact of rotational grazing on management of gastrointestinal nematodes in weaned lambs.

PubMed

Burke, J M; Miller, J E; Terrill, T H

2009-07-07

Gastrointestinal nematode (GIN) control for 'natural' or organic lamb production is needed, especially where Haemonchus contortus is prevalent. The objective was to determine the impact of rotational grazing on GIN infection of weaned lambs. In year 1, naturally infected Katahdin lambs (120 days of age) were randomly assigned to graze (1) continuous bermudagrass (CB; n=14), (2) rotational bermudagrass moved every 3.5 days and returned to original plot 35 days later for three rotations (RB; n=14), or (3) rotational bermudagrass rotated when forage height fell below 10 cm (RBH; n=7) where first day of grazing=Day 0. In late summer, all lambs were supplemented with 500 g corn/SBM because of poor condition. The following year, similar animals were used and included the CB (n=18) and the RB (n=36) groups only. In both years, fecal egg counts (FECs) and blood packed cell volume (PCV) were determined every 7-14 days and body weight every 28 days. Individuals were dewormed with 0.5 g copper oxide wire particles (COWP) when FAMACHA score increased to 3 or more. Between 0 and 3 deworming treatments per lamb were necessary and there tended to be fewer RB than CB lambs dewormed by Day 84 for both years combined (P<0.001). Worm free tracer lambs were introduced to CB (n=6) and RB (n=8) plots following the last rotation during the first year to determine worm burdens after 20 days of grazing. Abomasal worm burden tended to be greater in RB than CB or RBH tracer lambs (P<0.10), but intestinal worm numbers were similar. Differences may be due to differences in grazing patterns among groups. Body weight gains were similar between CB and RB groups. Economic value between the CB and RB lambs was similar based on number of lambs that could have been marketed as organic. For both years, lambs relied exclusively on COWP for GIN control with the exception of one lamb. In summary, while there was a reduced incidence of deworming in the RB compared with the CB group of lambs, estimated

7 CFR 1280.111 - Lamb.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means ovine animals of any age, including ewes and rams. ...

7 CFR 1280.111 - Lamb.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means ovine animals of any age, including ewes and rams. ...

7 CFR 1280.111 - Lamb.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means ovine animals of any age, including ewes and rams. ...

7 CFR 1280.111 - Lamb.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means ovine animals of any age, including ewes and rams. ...

Directional nonlinear guided wave mixing: Case study of counter-propagating shear horizontal waves

NASA Astrophysics Data System (ADS)

Hasanian, Mostafa; Lissenden, Cliff J.

2018-04-01

While much nonlinear ultrasonics research has been conducted on higher harmonic generation, wave mixing provides the potential for sensitive measurements of incipient damage unencumbered by instrumentation nonlinearity. Studies of nonlinear ultrasonic wave mixing, both collinear and noncollinear, for bulk waves have shown the robust capability of wave mixing for early damage detection. One merit of bulk wave mixing lies in their non-dispersive nature, but guided waves enable inspection of otherwise inaccessible material and a variety of mixing options. Co-directional guided wave mixing was studied previously, but arbitrary direction guided wave mixing has not been addressed until recently. Wave vector analysis is applied to study variable mixing angles to find wave mode triplets (two primary waves and a secondary wave) resulting in the phase matching condition. As a case study, counter-propagating Shear Horizontal (SH) guided wave mixing is analyzed. SH wave interactions generate a secondary Lamb wave mode that is readily receivable. Reception of the secondary Lamb wave mode is compared for an angle beam transducer, an air coupled transducer, and a laser Doppler vibrometer (LDV). Results from the angle beam and air coupled transducers are quite consistent, while the LDV measurement is plagued by variability issues.

Polwarth and Texel ewe parturition duration and its association with lamb birth asphyxia.

PubMed

Dutra, F; Banchero, G

2011-10-01

The objective of the present study was to test the hypothesis that parturition duration is related to birth asphyxia in lambs and that asphyxia affects newborn lamb viability and vigor. Two sire and dam genotypes (Texel: TX; Polwarth: PW) and their crosses were represented in the study. Eighty lambs (25 PW sire × PW dam, 13 TX × TX, 25 TX × PW, and 17 PW × TX) born to 69 grazing ewes were used. At birth, the log₁₀ length of the second stage of parturition, birth weight, placental weight, and several body measurements were recorded on all lambs, and jugular blood samples were analyzed with the i-Stat Portable Clinical Analyzer (Abbott, Montevideo, Uruguay). A modified Apgar viability score at birth and lamb behavior during their first hour of life were recorded. Brain weight, muscle:bone ratio, and bone density were recorded in 20 male lambs (5 from each breed group) that were euthanized and dissected 24 h after birth. Data were analyzed by linear regression, least squares ANOVA, and ordinal and binary logistic regressions. Mean blood gas and acid-base variables were 7.21 ± 0.09 for pH, 18.4 ± 9.8 mmHg for partial pressure of oxygen, 53 ± 12.5 mmHg for partial pressure of carbon dioxide, and -4 ± 5.1 mmol/L for extracellular fluid base excess. Parturition duration increased with birth weight (P < 0.001) and was shorter in TX ewes (P < 0.001), female lambs (P < 0.05), twins (P < 0.09), and twin females (sex × litter size interaction, P < 0.02). Twenty-six (32.9%) lambs were born asphyxiated (pO₂ < 10 mmHg or pH <7.1). Parturition duration increased the risk of asphyxia (P < 0.001), decreased the viability score (P < 0.001), and increased the latency to suckle the udder (P < 0.05). Twin-born lambs presented at birth a 16-fold greater risk of asphyxia (P < 0.01) and reduced placental efficiency (P < 0.05). Texel-sired lambs appeared immature at birth, with less bone density (P < 0.05), smaller brain (P < 0.05), shorter forelimbs (P < 0.05), greater

Measurements of the S-wave fraction in B 0 → K + π - μ + μ - decays and the B 0 → K ∗(892)0 μ + μ - differential branching fraction

NASA Astrophysics Data System (ADS)

Aaij, R.; Adeva, B.; Adinolfi, M.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Alvarez Cartelle, P.; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassi, G.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Aquines Gutierrez, O.; Archilli, F.; d'Argent, P.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Bay, A.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Bellee, V.; Belloli, N.; Belous, K.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bertolin, A.; Bettler, M.-O.; van Beuzekom, M.; Bifani, S.; Billoir, P.; Bird, T.; Birnkraut, A.; Bitadze, A.; Bizzeti, A.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Boettcher, T.; Bondar, A.; Bondar, N.; Bonivento, W.; Borghi, S.; Borisyak, M.; Borsato, M.; Bossu, F.; Boubdir, M.; Bowcock, T. J. V.; Bowen, E.; Bozzi, C.; Braun, S.; Britsch, M.; Britton, T.; Brodzicka, J.; Buchanan, E.; Burr, C.; Bursche, A.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Calvi, M.; Calvo Gomez, M.; Campana, P.; Campora Perez, D.; Capriotti, L.; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carniti, P.; Carson, L.; Carvalho Akiba, K.; Casse, G.; Cassina, L.; Castillo Garcia, L.; Cattaneo, M.; Cauet, Ch.; Cavallero, G.; Cenci, R.; Charles, M.; Charpentier, Ph.; Chatzikonstantinidis, G.; Chefdeville, M.; Chen, S.; Cheung, S.-F.; Chobanova, V.; Chrzaszcz, M.; Cid Vidal, X.; Ciezarek, G.; Clarke, P. E. L.; Clemencic, M.; Cliff, H. V.; Closier, J.; Coco, V.; Cogan, J.; Cogneras, E.; Cogoni, V.; Cojocariu, L.; Collazuol, G.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coquereau, S.; Corti, G.; Corvo, M.; Couturier, B.; Cowan, G. A.; Craik, D. C.; Crocombe, A.; Cruz Torres, M.; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Dall'Occo, E.; Dalseno, J.; David, P. N. Y.; Davis, A.; De Aguiar Francisco, O.; De Bruyn, K.; De Capua, S.; De Cian, M.; De Miranda, J. M.; De Paula, L.; De Simone, P.; Dean, C.-T.; Decamp, D.; Deckenhoff, M.; Del Buono, L.; Demmer, M.; Derkach, D.; Deschamps, O.; Dettori, F.; Dey, B.; Di Canto, A.; Dijkstra, H.; Dordei, F.; Dorigo, M.; Dosil Suárez, A.; Dovbnya, A.; Dreimanis, K.; Dufour, L.; Dujany, G.; Dungs, K.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Déléage, N.; Easo, S.; Egede, U.; Egorychev, V.; Eidelman, S.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; Elsasser, Ch.; Ely, S.; Esen, S.; Evans, H. M.; Evans, T.; Falabella, A.; Farley, N.; Farry, S.; Fay, R.; Ferguson, D.; Fernandez Albor, V.; Ferrari, F.; Ferreira Rodrigues, F.; Ferro-Luzzi, M.; Filippov, S.; Fiore, M.; Fiorini, M.; Firlej, M.; Fitzpatrick, C.; Fiutowski, T.; Fleuret, F.; Fohl, K.; Fontana, M.; Fontanelli, F.; Forshaw, D. C.; Forty, R.; Frank, M.; Frei, C.; Frosini, M.; Fu, J.; Furfaro, E.; Färber, C.; Gallas Torreira, A.; Galli, D.; Gallorini, S.; Gambetta, S.; Gandelman, M.; Gandini, P.; Gao, Y.; García Pardiñas, J.; Garra Tico, J.; Garrido, L.; Garsed, P. J.; Gascon, D.; Gaspar, C.; Gavardi, L.; Gazzoni, G.; Gerick, D.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Gianì, S.; Gibson, V.; Girard, O. G.; Giubega, L.; Gizdov, K.; Gligorov, V. V.; Golubkov, D.; Golutvin, A.; Gomes, A.; Gorelov, I. V.; Gotti, C.; Grabalosa Gándara, M.; Graciani Diaz, R.; Granado Cardoso, L. A.; Graugés, E.; Graverini, E.; Graziani, G.; Grecu, A.; Griffith, P.; Grillo, L.; Grünberg, O.; Gushchin, E.; Guz, Yu.; Gys, T.; Göbel, C.; Hadavizadeh, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Haines, S. C.; Hall, S.; Hamilton, B.; Han, X.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S. T.; Harrison, J.; He, J.; Head, T.; Heister, A.; Hennessy, K.; Henrard, P.; Henry, L.; Hernando Morata, J. A.; van Herwijnen, E.; Heß, M.; Hicheur, A.; Hill, D.; Hombach, C.; Hulsbergen, W.; Humair, T.; Hushchyn, M.; Hussain, N.; Hutchcroft, D.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jaeger, A.; Jalocha, J.; Jans, E.; Jawahery, A.; John, M.; Johnson, D.; Jones, C. R.; Joram, C.; Jost, B.; Jurik, N.; Kandybei, S.; Kanso, W.; Karacson, M.; Karbach, T. M.; Karodia, S.; Kecke, M.; Kelsey, M.; Kenyon, I. R.; Kenzie, M.; Ketel, T.; Khairullin, E.; Khanji, B.; Khurewathanakul, C.; Kirn, T.; Klaver, S.; Klimaszewski, K.; Kolpin, M.; Komarov, I.; Koopman, R. F.; Koppenburg, P.; Kozachuk, A.; Kozeiha, M.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krokovny, P.; Kruse, F.; Krzemien, W.; Kucewicz, W.; Kucharczyk, M.; Kudryavtsev, V.; Kuonen, A. K.; Kurek, K.; Kvaratskheliya, T.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lambert, D.; Lanfranchi, G.; Langenbruch, C.; Langhans, B.; Latham, T.; Lazzeroni, C.; Le Gac, R.; van Leerdam, J.; Lees, J.-P.; Leflat, A.; Lefrançois, J.; Lefèvre, R.; Lemaitre, F.; Lemos Cid, E.; Leroy, O.; Lesiak, T.; Leverington, B.; Li, Y.; Likhomanenko, T.; Lindner, R.; Linn, C.; Lionetto, F.; Liu, B.; Liu, X.; Loh, D.; Longstaff, I.; Lopes, J. H.; Lucchesi, D.; Lucio Martinez, M.; Luo, H.; Lupato, A.; Luppi, E.; Lupton, O.; Lusiani, A.; Lyu, X.; Machefert, F.; Maciuc, F.; Maev, O.; Maguire, K.; Malde, S.; Malinin, A.; Maltsev, T.; Manca, G.; Mancinelli, G.; Manning, P.; Maratas, J.; Marchand, J. F.; Marconi, U.; Marin Benito, C.; Marino, P.; Marks, J.; Martellotti, G.; Martin, M.; Martinelli, M.; Martinez Santos, D.; Martinez Vidal, F.; Martins Tostes, D.; Massacrier, L. M.; Massafferri, A.; Matev, R.; Mathad, A.; Mathe, Z.; Matteuzzi, C.; Mauri, A.; Maurin, B.; Mazurov, A.; McCann, M.; McCarthy, J.; McNab, A.; McNulty, R.; Meadows, B.; Meier, F.; Meissner, M.; Melnychuk, D.; Merk, M.; Michielin, E.; Milanes, D. A.; Minard, M.-N.; Mitzel, D. S.; Molina Rodriguez, J.; Monroy, I. A.; Monteil, S.; Morandin, M.; Morawski, P.; Mordà, A.; Morello, M. J.; Moron, J.; Morris, A. B.; Mountain, R.; Muheim, F.; Mulder, M.; Mussini, M.; Müller, D.; Müller, J.; Müller, K.; Müller, V.; Naik, P.; Nakada, T.; Nandakumar, R.; Nandi, A.; Nasteva, I.; Needham, M.; Neri, N.; Neubert, S.; Neufeld, N.; Neuner, M.; Nguyen, A. D.; Nguyen-Mau, C.; Niess, V.; Nieswand, S.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; O'Hanlon, D. P.; Oblakowska-Mucha, A.; Obraztsov, V.; Ogilvy, S.; Oldeman, R.; Onderwater, C. J. G.; Otalora Goicochea, J. M.; Otto, A.; Owen, P.; Oyanguren, A.; Palano, A.; Palombo, F.; Palutan, M.; Panman, J.; Papanestis, A.; Pappagallo, M.; Pappalardo, L. L.; Pappenheimer, C.; Parker, W.; Parkes, C.; Passaleva, G.; Patel, G. D.; Patel, M.; Patrignani, C.; Pearce, A.; Pellegrino, A.; Penso, G.; Pepe Altarelli, M.; Perazzini, S.; Perret, P.; Pescatore, L.; Petridis, K.; Petrolini, A.; Petrov, A.; Petruzzo, M.; Picatoste Olloqui, E.; Pietrzyk, B.; Pikies, M.; Pinci, D.; Pistone, A.; Piucci, A.; Playfer, S.; Plo Casasus, M.; Poikela, T.; Polci, F.; Poluektov, A.; Polyakov, I.; Polycarpo, E.; Pomery, G. J.; Popov, A.; Popov, D.; Popovici, B.; Potterat, C.; Price, E.; Price, J. D.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Puig Navarro, A.; Punzi, G.; Qian, W.; Quagliani, R.; Rachwal, B.; Rademacker, J. H.; Rama, M.; Ramos Pernas, M.; Rangel, M. S.; Raniuk, I.; Raven, G.; Redi, F.; Reichert, S.; dos Reis, A. C.; Remon Alepuz, C.; Renaudin, V.; Ricciardi, S.; Richards, S.; Rihl, M.; Rinnert, K.; Rives Molina, V.; Robbe, P.; Rodrigues, A. B.; Rodrigues, E.; Rodriguez Lopez, J. A.; Rodriguez Perez, P.; Rogozhnikov, A.; Roiser, S.; Romanovskiy, V.; Romero Vidal, A.; Ronayne, J. W.; Rotondo, M.; Ruf, T.; Ruiz Valls, P.; Saborido Silva, J. J.; Sagidova, N.; Saitta, B.; Salustino Guimaraes, V.; Sanchez Mayordomo, C.; Sanmartin Sedes, B.; Santacesaria, R.; Santamarina Rios, C.; Santimaria, M.; Santovetti, E.; Sarti, A.; Satriano, C.; Satta, A.; Saunders, D. M.; Savrina, D.; Schael, S.; Schellenberg, M.; Schiller, M.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmelzer, T.; Schmidt, B.; Schneider, O.; Schopper, A.; Schubert, K.; Schubiger, M.; Schune, M.-H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Semennikov, A.; Sergi, A.; Serra, N.; Serrano, J.; Sestini, L.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, V.; Shires, A.; Siddi, B. G.; Silva Coutinho, R.; Silva de Oliveira, L.; Simi, G.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, E.; Smith, I. T.; Smith, J.; Smith, M.; Snoek, H.; Sokoloff, M. D.; Soler, F. J. P.; Souza, D.; Souza De Paula, B.; Spaan, B.; Spradlin, P.; Sridharan, S.; Stagni, F.; Stahl, M.; Stahl, S.; Stefko, P.; Stefkova, S.; Steinkamp, O.; Stenyakin, O.; Stevenson, S.; Stoica, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Sun, L.; Sutcliffe, W.; Swientek, K.; Syropoulos, V.; Szczekowski, M.; Szumlak, T.; T'Jampens, S.; Tayduganov, A.; Tekampe, T.; Tellarini, G.; Teubert, F.; Thomas, C.; Thomas, E.; van Tilburg, J.; Tisserand, V.; Tobin, M.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Tournefier, E.; Tourneur, S.; Trabelsi, K.; Traill, M.; Tran, M. T.; Tresch, M.; Trisovic, A.; Tsaregorodtsev, A.; Tsopelas, P.; Tuning, N.; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vacca, C.; Vagnoni, V.; Valat, S.; Valenti, G.; Vallier, A.; Vazquez Gomez, R.; Vazquez Regueiro, P.; Vecchi, S.; van Veghel, M.; Velthuis, J. J.; Veltri, M.; Veneziano, G.; Venkateswaran, A.; Vesterinen, M.; Viaud, B.; Vieira, D.; Vieites Diaz, M.; Vilasis-Cardona, X.; Volkov, V.; Vollhardt, A.; Voneki, B.; Voong, D.; Vorobyev, A.; Vorobyev, V.; Voß, C.; de Vries, J. A.; Vázquez Sierra, C.; Waldi, R.; Wallace, C.; Wallace, R.; Walsh, J.; Wang, J.; Ward, D. R.; Watson, N. K.; Websdale, D.; Weiden, A.; Whitehead, M.; Wicht, J.; Wilkinson, G.; Wilkinson, M.; Williams, M.; Williams, M. P.; Williams, M.; Williams, T.; Wilson, F. F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S. A.; Wraight, K.; Wright, S.; Wyllie, K.; Xie, Y.; Xing, Z.; Xu, Z.; Yang, Z.; Yin, H.; Yu, J.; Yuan, X.; Yushchenko, O.; Zangoli, M.; Zarebski, K. A.; Zavertyaev, M.; Zhang, L.; Zhang, Y.; Zhang, Y.; Zhelezov, A.; Zheng, Y.; Zhokhov, A.; Zhukov, V.; Zucchelli, S.

2016-11-01

A measurement of the differential branching fraction of the decay B 0 → K ∗(892)0 μ + μ - is presented together with a determination of the S-wave fraction of the K + π - system in the decay B 0 → K +π- μ + μ -. The analysis is based on pp-collision data corresponding to an integrated luminosity of 3 fb-1 collected with the LHCb experiment. The measurements are made in bins of the invariant mass squared of the dimuon system, q 2. Precise theoretical predictions for the differential branching fraction of B 0 → K ∗(892)0 μ + μ - decays are available for the q 2 region 1 .1 < q 2 < 6 .0 GeV2 /c 4. In this q 2 region, for the K +π- invariant mass range 796 < m Kπ < 996 MeV /c 2, the S-wave fraction of the K +π- system in B 0 → K +π- μ + μ - decays is found to be {F}S=0.101± 0.017(stat)± 0.009(syst), and the differential branching fraction of B 0 → K ∗(892)0 μ + μ - decays is determined to be dB/d{q}^2=(0.{392}_{-0.019}^{+0.020}(stat)± 0.010(syst)± 0.027(norm))× 1{0}^{-7}{c}^4/{GeV}^2.

Two-Port Fetoscopic Repair of Myelomeningocele in Fetal Lambs.

PubMed

Guilbaud, Lucie; Garabedian, Charles; Roux, Nathalie; Friszer, Stéphanie; Dhombres, Ferdinand; Vialle, Raphaël; Shah, Zoobia; Bessières, Bettina; Di Rocco, Federico; Zerah, Michel; Jouannic, Jean-Marie

2018-02-21

The aim of this study was to assess the feasibility and the effectiveness of a fetoscopic myelomeningocele (MMC) repair with a running single suture using a 2-port access in the sheep model. Eighteen fetuses underwent surgical creation of a MMC defect at day 75. Fetuses were then randomized into 3 groups. Four fetuses remained untreated (control group). In the other 14 fetuses, a prenatal repair was performed at day 90: 7 fetuses had an open repair (oMMC), and 7 fetuses had a fetoscopic repair (fMMC) using a single-layer running suture through a 2-port access. Lambs were sacrificed at term, and histological examinations were performed. Hindbrain herniation was observed in all live lambs in the control group. A complete closure of the defect was achieved in all the lambs of the fMMC group. A complete healing of the defect and no hindbrain herniation were observed in all live lambs of the oMMC and fMMC groups. The durations of surgeries were not statistically different between the oMMC and the fMMC groups (60 vs. 53 min, p = 0.40), as was the risk of fetal loss (fMMC: 1/7, oMMC: 3/7, p = 0.56). Fetoscopic repair of MMC can be performed using a single-layer running suture through a 2-port access and may be promising to reduce the risk of premature rupture of membranes. © 2018 S. Karger AG, Basel.

Confinement-induced p-wave resonances from s-wave interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishida, Yusuke; Tan, Shina; School of Physics, Georgia Institute of Technology, Atlanta, Georgia 30332

2010-12-15

We show that a purely s-wave interaction in three dimensions (3D) can induce higher partial-wave resonances in mixed dimensions. We develop two-body scattering theories in all three cases of 0D-3D, 1D-3D, and 2D-3D mixtures and determine the positions of higher partial-wave resonances in terms of the 3D s-wave scattering length assuming a harmonic confinement potential. We also compute the low-energy scattering parameters in the p-wave channel (scattering volume and effective momentum) that are necessary for the low-energy effective theory of the p-wave resonance. We point out that some of the resonances observed in the Florence group experiment [Phys. Rev. Lett.more » 104, 153202 (2010)] can be interpreted as the p-wave resonances in the 2D-3D mixed dimensions. Our study paves the way for a variety of physics, such as Anderson localization of matter waves under p-wave resonant scatterers.« less

A supplement containing multiple types of gluconeogenic substrates alters intake but not productivity of heat-stressed Afshari lambs.

PubMed

Mahjoubi, E; Amanlou, H; Hossein Yazdi, M; Aghaziarati, N; Noori, G R; Vahl, C I; Bradford, B J; Baumgard, L H

2016-06-01

Thirty-two Afshari lambs were used in a completely randomized design with a 2 × 2 factorial arrangement of treatments to evaluate a nutritional supplement designed to provide multiple gluconeogenic precursors during heat stress (HS). Lambs were housed in thermal neutral (TN) conditions and fed ad libitum for 8 d to obtain covariate data (period 1 [P1]) for the subsequent experimental period (period 2 [P2]). During P2, which lasted 9 d, half of the lambs were subjected to HS and the other 16 lambs were maintained in TN conditions but pair fed (PFTN) to the HS lambs. Half of the lambs in each thermal regime were fed (top-dressed) 100 g/d of a feed supplement designed to provide gluconeogenic precursors (8 lambs in HS [heat stress with Glukosa {HSG}] and 8 lambs in PFTN [pair-fed thermal neutral with Glukosa]) and the other lambs in both thermal regimes were fed only the basal control diet (HS without Glukosa [HSC] and pair-fed thermal neutral without Glukosa). Heat stress decreased DMI (14%) and by design there were no differences between the thermal treatments, but HSG lambs had increased DMI (7.5%; < 0.05) compared with the HSC lambs. Compared with PFTN lambs, rectal temperature and skin temperature at the rump, shoulder, and legs of HS lambs were increased ( < 0.05) at 0700 and 1400 h. Rectal temperature at 1400 h decreased for HSG lambs (0.15 ± 0.03°C; < 0.05) compared with HSC lambs. Despite similar DMI between thermal treatments, ADG for HS and PFTN lambs in P2 was decreased 55 and 85%, respectively, compared with lambs in P1 ( < 0.01). Although the prefeeding glucose concentration was not affected by thermal treatment or diet, HSG lambs had increased postfeeding glucose concentration compared with HSC lambs ( < 0.05). In contrast to the glucose responses, circulating insulin was influenced only by thermal treatment; HS lambs had increased insulin concentration ( < 0.01) before feeding and decreased concentration ( < 0.05) after feeding compared with PFTN

Effects of asphyxia on lung fluid balance in baby lambs.

PubMed Central

Hansen, T N; Hazinski, T A; Bland, R D

1984-01-01

The purpose of this study was to assess the effects of combined hypoxia and hypercapnia and of severe asphyxia on lung water balance and protein transport in newborn lambs. We studied ten 2-4-wk-old anesthetized lambs which were mechanically ventilated first with air for 2-3 h, then with 10-12% oxygen in nitrogen for 2-4 h, and then with 10-12% oxygen and 10-12% carbon dioxide in nitrogen for 2-4 h. Next we stopped their breathing for 1-2 min to produce severe asphyxia, after which we followed their recovery in air for 2-4 h. In 5 of the 10 lambs we intravenously injected radioactive albumin and measured its turnover time between plasma and lymph during the baseline period and after recovery from asphyxia. During alveolar hypoxia alone, mean pulmonary arterial pressure increased 60% and lung lymph flow increased 74%, whereas lymph protein concentration decreased from 3.47 +/- 0.13 to 2.83 +/- 0.15 g/dl. Cardiac output, left atrial pressure, and plasma protein concentration did not change. When carbon dioxide was added to the inspired gas mixture, pulmonary arterial pressure increased 22%, cardiac output increased 13%, lung lymph flow increased 33%, and lymph protein concentration decreased from 2.83 +/- 0.15 to 2.41 +/- 0.13 g/dl. Left atrial pressure and plasma protein concentration did not change. After 60-90 s of induced asphyxia, vascular pressures and lung lymph flow rapidly returned to values the same as those obtained during the baseline period. The turnover time for radioactive albumin between plasma and lymph was the same between the baseline and recovery periods (185 +/- 16 vs. 179 +/- 12 min). The ratio of albumin to globulin in lymph relative to the same ratio in plasma did not change during any phase of these experiments. Five lambs killed after recovery from asphyxia had significantly less blood and extravascular water in their lungs than control lambs had. We conclude that in the newborn lamb both alveolar hypoxia and alveolar hypoxia with

7 CFR 65.190 - Lamb.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Lamb. 65.190 Section 65.190 Agriculture Regulations of..., PORK, LAMB, CHICKEN, GOAT MEAT, PERISHABLE AGRICULTURAL COMMODITIES, MACADAMIA NUTS, PECANS, PEANUTS, AND GINSENG General Provisions Definitions § 65.190 Lamb. Lamb means meat produced from sheep. ...

7 CFR 1280.112 - Lamb products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb products. 1280.112 Section 1280.112 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.112 Lamb products. Lamb...

Peri-Elastodynamic Simulations of Guided Ultrasonic Waves in Plate-Like Structure with Surface Mounted PZT.

PubMed

Patra, Subir; Ahmed, Hossain; Banerjee, Sourav

2018-01-18

Peridynamic based elastodynamic computation tool named Peri-elastodynamics is proposed herein to simulate the three-dimensional (3D) Lamb wave modes in materials for the first time. Peri-elastodynamics is a nonlocal meshless approach which is a scale-independent generalized technique to visualize the acoustic and ultrasonic waves in plate-like structure, micro-electro-mechanical systems (MEMS) and nanodevices for their respective characterization. In this article, the characteristics of the fundamental Lamb wave modes are simulated in a sample plate-like structure. Lamb wave modes are generated using a surface mounted piezoelectric (PZT) transducer which is actuated from the top surface. The proposed generalized Peri-elastodynamics method is not only capable of simulating two dimensional (2D) in plane wave under plane strain condition formulated previously but also capable of accurately simulating the out of plane Symmetric and Antisymmetric Lamb wave modes in plate like structures in 3D. For structural health monitoring (SHM) of plate-like structures and nondestructive evaluation (NDE) of MEMS devices, it is necessary to simulate the 3D wave-damage interaction scenarios and visualize the different wave features due to damages. Hence, in addition, to simulating the guided ultrasonic wave modes in pristine material, Lamb waves were also simulated in a damaged plate. The accuracy of the proposed technique is verified by comparing the modes generated in the plate and the mode shapes across the thickness of the plate with theoretical wave analysis.

Development and validation of equations utilizing lamb vision system output to predict lamb carcass fabrication yields.

PubMed

Cunha, B C N; Belk, K E; Scanga, J A; LeValley, S B; Tatum, J D; Smith, G C

2004-07-01

This study was performed to validate previous equations and to develop and evaluate new regression equations for predicting lamb carcass fabrication yields using outputs from a lamb vision system-hot carcass component (LVS-HCC) and the lamb vision system-chilled carcass LM imaging component (LVS-CCC). Lamb carcasses (n = 149) were selected after slaughter, imaged hot using the LVS-HCC, and chilled for 24 to 48 h at -3 to 1 degrees C. Chilled carcasses yield grades (YG) were assigned on-line by USDA graders and by expert USDA grading supervisors with unlimited time and access to the carcasses. Before fabrication, carcasses were ribbed between the 12th and 13th ribs and imaged using the LVS-CCC. Carcasses were fabricated into bone-in subprimal/primal cuts. Yields calculated included 1) saleable meat yield (SMY); 2) subprimal yield (SPY); and 3) fat yield (FY). On-line (whole-number) USDA YG accounted for 59, 58, and 64%; expert (whole-number) USDA YG explained 59, 59, and 65%; and expert (nearest-tenth) USDA YG accounted for 60, 60, and 67% of the observed variation in SMY, SPY, and FY, respectively. The best prediction equation developed in this trial using LVS-HCC output and hot carcass weight as independent variables explained 68, 62, and 74% of the variation in SMY, SPY, and FY, respectively. Addition of output from LVS-CCC improved predictive accuracy of the equations; the combined output equations explained 72 and 66% of the variability in SMY and SPY, respectively. Accuracy and repeatability of measurement of LM area made with the LVS-CCC also was assessed, and results suggested that use of LVS-CCC provided reasonably accurate (R2 = 0.59) and highly repeatable (repeatability = 0.98) measurements of LM area. Compared with USDA YG, use of the dual-component lamb vision system to predict cut yields of lamb carcasses improved accuracy and precision, suggesting that this system could have an application as an objective means for pricing carcasses in a value

Periconceptional growth hormone treatment alters fetal growth and development in lambs.

PubMed

Koch, J M; Wilmoth, T A; Wilson, M E

2010-05-01

Research in the area of fetal programming has focused on intrauterine growth restriction. Few studies have attempted to examine programming mechanisms that ultimately lead to lambs with a greater potential for postnatal growth. We previously demonstrated that treatment of ewes with GH at the time of breeding led to an increase in birth weight. Therefore, the objective of this study was to determine the effects of a single injection of sustained-release GH given during the periconceptional period on fetal growth and development and to determine if the GH axis would be altered in these offspring. Estrus was synchronized using 2 injections of PGF(2alpha); at the time of the second injection, ewes assigned to treatment were also given an injection of sustained-release GH. A maternal jugular vein sample was taken weekly to analyze IGF-I as a proxy for GH to estimate the duration of the treatment effect. In ewes treated with GH, IGF-I increased (P < 0.05) by wk 1 and remained elevated until wk 4 postinjection. Lambs were weighed, crown-rump length and abdominal girth were determined, and a plasma sample was collected. In a subset of male lambs, liver, heart, and brain weights were obtained, as well as left and right ventricular wall thicknesses. On postnatal d 100, a subset of ewe lambs were weighed and challenged with an intravenous injection of GHRH. Lambs from treated ewes had increased (P < 0.05) birth weight and abdominal girth compared with control lambs; however, there was no difference in crown-rump length. Expression of GH receptor and IGF-I were increased (P < 0.05) in lambs gestated by GH-treated ewes compared with control ewes. The left ventricular wall was thinner (P < 0.05) from lambs in the GH-treated group compared with control lambs. On postnatal d 100, those ewe lambs born to ewes treated with GH continued to be heavier (P < 0.05) and had no IGF-I response to GHRH challenge. In conclusion, treating ewes with a single injection of GH appeared to alter

A national audit of retail lamb loin quality in Australia.

PubMed

Safari, E; Channon, H A; Hopkins, D L; Hall, D G; van de Ven, R

2002-07-01

A retail audit of lamb loin tenderness was conducted over a 12-month period to determine the variation in tenderness of Australian lamb. Tenderness was objectively measured using Warner-Bratzler (WB) shear force. Muscle pH and cooking loss were determined on all samples and colour was measured on a sub-sample of loins. A total of 909 midloins from retail butcher shops and supermarkets located in four Australian capital cities (Sydney, Canberra, Melbourne, and Perth) were evaluated at four sampling times (December 1997 and March, June, and October 1998). Overall, 20.3% of all midloins purchased had a WB shear force value above the threshold level of 5 kg. Generic samples from Melbourne butcher shops were similar for WB shear force on average to the generic samples from Canberra and Sydney, whereas those from Melbourne supermarkets had significantly (P<0.001) higher WB shear force and were in line with generic samples from Perth. In both Canberra and Perth, alliance (branded) lamb had a greater WB shear force (P<0.05) than generic lamb. No relationship was found between price per kg and shear force (r=0.02) for loins purchased in Sydney (n=220). Price per kg differed between months (P<0.001) and suburbs (P<0.001), but not between retail butcher shops and supermarkets. Of the midloins tested, 10.3% had a pH above the critical point of 5.8. Midloins from the December 1997 sampling had a lower pH (P<0.01) than those sampled at other months. Those sampled in Melbourne and Perth had a similar mean pH, which were lower (P<0.001) than Canberra and Sydney samples. The findings from this quality audit suggest that there is room to improve the tenderness of Australian lamb sold in the domestic market. A lamb eating quality assurance system, based on set protocols, is one approach that is currently being investigated in Australia to ensure the supply of consistently high eating quality lamb to consumers.

Humoral and cellular immunity in chromium picolinate-supplemented lambs.

PubMed

Dallago, B S L; McManus, C M; Caldeira, D F; Campeche, A; Burtet, R T; Paim, T P; Gomes, E F; Branquinho, R P; Braz, S V; Louvandini, H

2013-08-01

The effects of oral supplementation of chromium picolinate (CrPic) on humoral and cellular immunity in sheep were investigated. Twenty-four male lambs divided into four treatments and received different dosages of CrPic: placebo (0), 0.250, 0.375, and 0.500 mg of chromium/animal/day during 84 days. The base ration was Panicum maximum cv Massai hay and concentrate. Blood samples were collected fortnightly for total and differential leukocyte counts. On days 28 and 56, the lambs were challenged with chicken ovalbumin I.M. Serum samples were collected on days 46 and 74 and subjected to an indirect enzyme-linked immunosorbent assay to measure IgG anti-ovalbumin. The cell-mediated immune response was determined by a delay-type hypersensitivity test using phytohemagglutinin. CrPic did not significantly affect humoral immunity in lambs but there was a negative effect on cellular immunity (P < 0.05) as Cr supplementation increased. Therefore, the level of Cr supplementation for lambs must be better studied to address its effect on stressed animals or the possible toxic effects of Cr on the animal itself or its immune system.

Hydrocortisone normalizes oxygenation and cGMP regulation in lambs with persistent pulmonary hypertension of the newborn

PubMed Central

Lakshminrusimha, Satyan; Wedgwood, Stephen; Czech, Lyubov; Gugino, Sylvia F.; Russell, James A.; Farrow, Kathryn N.; Steinhorn, Robin H.

2012-01-01

In the pulmonary vasculature, cGMP levels are regulated by soluble guanylate cyclase (sGC) and phosphodiesterase 5 (PDE5). We previously reported that lambs with persistent pulmonary hypertension of the newborn (PPHN) demonstrate increased reactive oxygen species (ROS) and altered sGC and PDE5 activity, with resultant decreased cGMP. The objective of this study was to evaluate the effects of hydrocortisone on pulmonary vascular function, ROS, and cGMP in the ovine ductal ligation model of PPHN. PPHN lambs were ventilated with 100% O2 for 24 h. Six lambs received 5 mg/kg hydrocortisone every 8 h times three doses (PPHN-hiHC), five lambs received 3 mg/kg hydrocortisone followed by 1 mg·kg−1·dose−1 times two doses (PPHN-loHC), and six lambs were ventilated with O2 alone (PPHN). All groups were compared with healthy 1-day spontaneously breathing lambs (1DSB). O2 ventilation of PPHN lambs decreased sGC activity, increased PDE5 activity, and increased ROS vs. 1DSB lambs. Both hydrocortisone doses significantly improved arterial-to-alveolar ratios relative to PPHN lambs, decreased PDE5 activity, and increased cGMP relative to PPHN lambs. High-dose hydrocortisone also increased sGC activity, decreased PDE5 expression, decreased ROS, and increased total vascular SOD activity vs. PPHN lambs. These data suggest that hydrocortisone treatment in clinically relevant doses improves oxygenation and decreases hyperoxia-induced changes in sGC and PDE5 activity, increasing cGMP levels. Hydrocortisone reduces ROS levels in part by increasing SOD activity in PPHN lambs ventilated with 100% O2. We speculate that hydrocortisone increases cGMP by direct effects on sGC and PDE5 expression and by attenuating abnormalities induced by oxidant stress. PMID:22198909

Ewes Direct Most Maternal Attention towards Lambs that Show the Greatest Pain-Related Behavioural Responses

PubMed Central

Futro, Agnieszka; Masłowska, Katarzyna; Dwyer, Cathy M.

2015-01-01

Although neonatal farm animals are frequently subjected to painful management procedures, the role of maternal behaviour in pain coping, has not been much studied. We investigated whether ewes were able to distinguish between lambs in pain and those that were not, and whether their behaviour altered depending on the severity of lamb pain. Eighty male lambs were allocated to one of 4 pain treatments within 24 hours of birth. Lambs were either handled only (C), bilaterally castrated with tight rubber rings (RR), as for RR but with the application of a Burdizzo clamp immediately proximal to the ring (Combined) or subjected to short scrotum castration (SSC) where the testicles were retained within the abdomen and only the scrotum removed. The behaviour of the ewe, treated lamb and untreated sibling where present (n = 54) were recorded for 30 minutes after treatment. Castration treatment increased the expression of abnormal standing and lying postures, specific pain-related behaviours (head-turning, stamping/kicking, easing quarters, tail wagging) and composite pain scores (P<0.001 for all). The greatest expression of pain-related behaviours was shown by lambs in the RR group, which were the only group to show rolling responses indicative of severe pain, followed by the SSC group. Ewes expressed more licking/sniffing responses to the RR and SSC lambs than towards the Combined and C lambs (P<0.05), and oriented most to RR lambs and least to C lambs (P<0.001). Ewes with two lambs also directed more attention towards the treated than the untreated lamb (P<0.001). The quantity of maternal care directed towards the lamb was positively correlated with the expression of active pain behaviours. The data demonstrate that ewes are able to discriminate between lambs in pain and those that are not, and that their response is increased with a greater severity of pain. PMID:26217942

Genetic and environmental factors affecting perinatal and preweaning survival of D'man lambs.

PubMed

Boujenane, Ismaïl; Chikhi, Abdelkader; Lakcher, Oumaïma; Ibnelbachyr, Mustapha

2013-08-01

This study examined the viability of 4,554 D'man lambs born alive at Errachidia research station in south-eastern Morocco between 1988 and 2009. Lamb survival to 1, 10, 30 and 90 days old was 0.95, 0.93, 0.93 and 0.92, respectively. The majority of deaths (85.7%) occurred before 10 days of age. Type and period of birth both had a significant effect on lamb survival traits, whereas age of dam and sex of lamb did not. The study revealed a curvilinear relationship between lamb's birth weight and survival traits from birth to 90 days, with optimal birth weights for maximal perinatal and preweaning survival varying according to type of birth from 2.6 to 3.5 kg. Estimation of variance components, using an animal model including direct and maternal genetic effects, the permanent maternal environment as well as fixed effects, showed that direct and maternal heritability estimates for survival traits between birth and 90 days were mostly low and varied from 0.01 to 0.10; however, direct heritability for survival at 1 day from birth was estimated at 0.63. Genetic correlations between survival traits and birth weight were positive and low to moderate. It was concluded that survival traits of D'man lambs between birth and 90 days could be improved through selection, but genetic progress would be low. However, the high proportion of the residual variance to total variance reinforces the need to improve management and lambing conditions.

Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis

NASA Astrophysics Data System (ADS)

Fakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey

2018-02-01

Ultrasonic guided waves (GWs), e.g. Lamb waves, have been proven effective in the detection of defects such as corrosion, cracking, delamination, and debonding in both composite and metallic structures. They are a significant tool employed in structural health monitoring. In this study, the ability of ultrasonic GWs to assess the quality of friction stir welding (FSW) was investigated. Four friction stir welded AZ31B magnesium plates processed with different welding parameters and a non-welded plate were used. The fundamental symmetric (S0) Lamb wave mode was excited using piezoelectric wafers (PZTs). Further, the S0 mode was separated using the "Improved complete ensemble empirical mode decomposition with adaptive noise (Improved CEEMDAN)" technique. A damage index (DI) was defined based on the variation in the amplitude of the captured wave signals in order to detect the presence and asses the severity of damage resulting from the welding process. As well, computed tomography (CT) scanning was used as a non-destructive testing (NDT) technique to assess the actual weld quality and validate predictions based on the GW approach. The findings were further confirmed using finite element analysis (FEA). To model the actual damage profile in the welds, "Mimics" software was used for the 3D reconstruction of the CT scans. The built 3D models were later used for evaluation of damage volume and for FEA. The damage volumes were correlated to the damage indices computed from both experimental and numerical data. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the friction stir welded joints. This methodology has great potential as a future classification method of FSW quality.

Interaction between copper oxide wire particles and Duddingtonia flagrans in lambs.

PubMed

Burke, J M; Miller, J E; Larsen, M; Terrill, T H

2005-11-25

An experiment was completed to determine if copper oxide wire particles (COWP) had any effect on the activity of the nematode-trapping fungus Duddingtonia flagrans in growing lambs. COWP has been used recently as a dewormer in small ruminants because of nematode resistance to anthelmintics. D. flagrans has been used to control free-living stages of parasitic nematodes in livestock. Katahdin and Dorper lambs, 4 months of age, were administered no or 4 g COWP (n=24/dose) in early October 2003. Haemonchus contortus was the predominant gastrointestinal parasite during the trial, which was acquired naturally from pasture. Half the lambs from each COWP group were supplemented with corn/soybean meal with or without D. flagrans for 35 days. Fecal egg counts (FEC) and packed cell volume (PCV) were determined weekly between days 0 (day of COWP administration) and 35. Feces from lambs in each treatment group were pooled and three replicates per group were cultured for 14 days at room temperature. Larvae (L3) were identified and counted per gram of feces cultured. Treatment with COWP was effective in decreasing FEC, which remained low compared with FEC from lambs not treated with COWP. This led to an increase in PCV in these lambs (COWP x day, P<0.001). Number of larvae was decreased in feces from lambs treated with COWP and D. flagrans between days 14 and 35 compared to the other groups of lambs (COWP x D. flagrans x day, P<0.003). Percentage of larvae identified as H. contortus decreased in feces collected from lambs treated with COWP and D. flagrans between days 14 and 28 compared with other treatments (COWP x D. flagrans x day, P<0.05). Other trichostrongyles were present and remained less than 7% in feces collected from control lambs. There was no adverse effect of COWP on the ability of D. flagrans to trap residual larvae after COWP treatment. With fewer eggs being excreted due to the effect of copper on H. contortus, and the additional larval reducing effect exerted by

A model-dependent approach to the non-relativistic Lamb shift

NASA Astrophysics Data System (ADS)

Diaz-Valdes, J. F.; Bruce, S. A.

2018-02-01

The precise observation of the Lamb shift, between the 2s_{1/2} and 2p_{1/2} levels in hydrogen, was a genuine motivation for the development of modern quantum electrodynamics. According to Dirac theory, the 2s_{1/2} and 2p_{1/2} levels should have equal energies. However, "radiative corrections" due to the interaction between the atomic electron and the vacuum, shift the 2s_{1/2} level higher in energy by around 4.37493× 10^{-6} eV or 2π\\hbar× 1057.85 MHz relative to the 2p_{1/2} level. The measurement of Lamb and Retherford provided the stimulus for renormalization theory which has been so successful in handling troublesome divergences. The Lamb shift is still a central theme in atomic physics. W.E. Lamb was the first to see that this tiny shift, so elusive and hard to measure, would clarify in a fundamental way our thinking about particles and fields. In this article, the Lamb shift for the 2 s energy level in hydrogen is assessed for three different electron models by using the variational principle. It is then verified that this shift arises mostly from the interaction of a bound electron with the zero-point fluctuations of the free electromagnetic field (Welton's interpretation). We briefly comment on the construct validity of the proposed electron models.

Comparison of visible and near infrared reflectance spectroscopy on fat to authenticate dietary history of lambs.

PubMed

Huang, Y; Andueza, D; de Oliveira, L; Zawadzki, F; Prache, S

2015-11-01

Since consumers are showing increased interest in the origin and method of production of their food, it is important to be able to authenticate dietary history of animals by rapid and robust methods used in the ruminant products. Promising breakthroughs have been made in the use of spectroscopic methods on fat to discriminate pasture-fed and concentrate-fed lambs. However, questions remained on their discriminatory ability in more complex feeding conditions, such as concentrate-finishing after pasture-feeding. We compared the ability of visible reflectance spectroscopy (Vis RS, wavelength range: 400 to 700 nm) with that of visible-near-infrared reflectance spectroscopy (Vis-NIR RS, wavelength range: 400 to 2500 nm) to differentiate between carcasses of lambs reared with three feeding regimes, using partial least square discriminant analysis (PLS-DA) as a classification method. The sample set comprised perirenal fat of Romane male lambs fattened at pasture (P, n = 69), stall-fattened indoors on commercial concentrate and straw (S, n = 55) and finished indoors with concentrate and straw for 28 days after pasture-feeding (PS, n = 65). The overall correct classification rate was better for Vis-NIR RS than for Vis RS (99.0% v. 95.1%, P < 0.05). Vis-NIR RS allowed a correct classification rate of 98.6%, 100.0% and 98.5% for P, S and PS lambs, respectively, whereas Vis RS allowed a correct classification rate of 98.6%, 94.5% and 92.3% for P, S and PS lambs, respectively. This study suggests the likely implication of molecules absorbing light in the non-visible part of the Vis-NIR spectra (possibly fatty acids), together with carotenoid and haem pigments, in the discrimination of the three feeding regimes.

Different dietary energy intake affects skeletal muscle development through an Akt-dependent pathway in Dorper × Small Thin-Tailed crossbred ewe lambs.

PubMed

Zhao, J X; Liu, X D; Li, K; Liu, W Z; Ren, Y S; Zhang, J X

2016-10-01

The objective of this experiment was to investigate the mechanisms through which different levels of dietary energy affect postnatal skeletal muscle development in ewe lambs. Twelve Dorper × Small Thin-Tailed crossbred ewe lambs (100 d of age; 20 ± 0.5 kg BW) were selected randomly and divided into 2 groups in a completely randomized design. Animals were offered identical diets at 100% or 65% of ad libitum intake. Lambs were euthanized when BW in the ad libitum group reached 35 kg and the semitendinosus muscle was sampled. Final BW and skeletal muscle weight were decreased (P < 0.01) by feed restriction. Both muscle fiber size distribution and myofibril cross-sectional area were altered by feed restriction. Insulin-like growth factor 1 (IGF-1) messenger RNA (mRNA) content was decreased (P < 0.05) when lambs were underfed, whereas no difference for IGF-2 mRNA expression was observed (P > 0.05). Feed restriction altered phosphor-Akt protein abundance (P < 0.01). Moreover, the mammalian target of rapamycin (mTOR) pathway was inhibited by feed restriction, which was associated with decreased phosphor-mTOR, phosphorylated eukaryotic initiation factor 4E binding protein 1 (phosphor-4EBP1), and phosphorylated ribosomal protein S6 kinase (phosphor-S6K). Both mRNA expression of myostatin and its protein content were elevated in feed-restricted ewe lambs (P < 0.05). In addition, mRNA expression of both muscle RING finger 1 and muscle atrophy F-box was increased when ewe lambs were underfed. In summary, feed restriction in young growing ewe lambs attenuates skeletal muscle hypertrophy by inhibiting protein synthesis and increasing protein degradation, which may act through the Akt-dependent pathway. Copyright © 2016 Elsevier Inc. All rights reserved.

Quasi-Rayleigh waves in butt-welded thick steel plate

NASA Astrophysics Data System (ADS)

Kamas, Tuncay; Giurgiutiu, Victor; Lin, Bin

2015-03-01

This paper discusses theoretical and experimental analyses of weld guided surface acoustic waves (SAW) through the guided wave propagation (GWP) analyses. The GWP analyses have been carried out by utilizing piezoelectric wafer active sensors (PWAS) for in situ structural inspection of a thick steel plate with butt weld as the weld bead is ground flush. Ultrasonic techniques are commonly used for validation of welded structures in many in-situ monitoring applications, e.g. in off-shore structures, in nuclear and pressure vessel industries and in a range of naval applications. PWAS is recently employed in such ultrasonic applications as a resonator as well as a transducer. Quasi-Rayleigh waves a.k.a. SAW can be generated in relatively thick isotropic elastic plate having the same phase velocity as Rayleigh waves whereas Rayleigh waves are a high frequency approximation of the first symmetric (S0) and anti-symmetric (A0) Lamb wave modes. As the frequency becomes very high the S0 and the A0 wave speeds coalesce, and both have the same value. This value is exactly the Rayleigh wave speed and becomes constant along the frequency i.e. Rayleigh waves are non-dispersive guided surface acoustic waves. The study is followed with weld-GWP tests through the pitch-catch method along the butt weld line. The tuning curves of quasi-Rayleigh wave are determined to show the tuning and trapping effect of the weld bead that has higher thickness than the adjacent plates on producing a dominant quasi-Rayleigh wave mode. The significant usage of the weld tuned and guided quasi-Rayleigh wave mode is essentially discussed for the applications in the in-situ inspection of relatively thick structures with butt weld such as naval offshore structures. The paper ends with summary, conclusions and suggestions for future work.

Quasi-Rayleigh waves in butt-welded thick steel plate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamas, Tuncay, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu; Giurgiutiu, Victor, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu; Lin, Bin, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu

2015-03-31

This paper discusses theoretical and experimental analyses of weld guided surface acoustic waves (SAW) through the guided wave propagation (GWP) analyses. The GWP analyses have been carried out by utilizing piezoelectric wafer active sensors (PWAS) for in situ structural inspection of a thick steel plate with butt weld as the weld bead is ground flush. Ultrasonic techniques are commonly used for validation of welded structures in many in-situ monitoring applications, e.g. in off-shore structures, in nuclear and pressure vessel industries and in a range of naval applications. PWAS is recently employed in such ultrasonic applications as a resonator as wellmore » as a transducer. Quasi-Rayleigh waves a.k.a. SAW can be generated in relatively thick isotropic elastic plate having the same phase velocity as Rayleigh waves whereas Rayleigh waves are a high frequency approximation of the first symmetric (S0) and anti-symmetric (A0) Lamb wave modes. As the frequency becomes very high the S0 and the A0 wave speeds coalesce, and both have the same value. This value is exactly the Rayleigh wave speed and becomes constant along the frequency i.e. Rayleigh waves are non-dispersive guided surface acoustic waves. The study is followed with weld-GWP tests through the pitch-catch method along the butt weld line. The tuning curves of quasi-Rayleigh wave are determined to show the tuning and trapping effect of the weld bead that has higher thickness than the adjacent plates on producing a dominant quasi-Rayleigh wave mode. The significant usage of the weld tuned and guided quasi-Rayleigh wave mode is essentially discussed for the applications in the in-situ inspection of relatively thick structures with butt weld such as naval offshore structures. The paper ends with summary, conclusions and suggestions for future work.« less

7 CFR 1280.217 - Lamb purchases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb purchases. 1280.217 Section 1280.217 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Assessments § 1280.217 Lamb purchases. (a...

Influence of alfalfa grazing-based feeding systems on carcass fat colour and meat quality of light lambs.

PubMed

Ripoll, G; Albertí, P; Joy, M

2012-02-01

One hundred and twenty-seven lambs were fed as follows: lambs and dams grazing alfalfa (Gr); the same as Gr but lambs had access to concentrate (Gr + S); ewes grazed and lambs received milk and concentrate until weaning and thereafter concentrate and straw (Rat-Gr); ewes and lambs were stall-fed (Ind). Lambs were slaughtered at 22-24 kg live weight and fat and M. rectus abdominis colour was measured instrumentally and subjectively. The evolution of the instrumental colour and texture of M. longissimus lumborum was also recorded. There were significant differences in the instrumental colour of subcutaneous fat amongst feeding systems, but no differences were observed upon visual appraisal. On average, M. rectus abdominis colour in the four feeding systems was classed as pink. Differences in longissimus thoracis colour at 0 h disappeared at 24h of air exposure and there were no differences in pH or cooking losses. At no time were any differences in instrumental texture found. Copyright © 2011 Elsevier Ltd. All rights reserved.

Plane Wave SH₀ Piezoceramic Transduction Optimized Using Geometrical Parameters.

PubMed

Boivin, Guillaume; Viens, Martin; Belanger, Pierre

2018-02-10

Structural health monitoring is a prominent alternative to the scheduled maintenance of safety-critical components. The nondispersive nature as well as the through-thickness mode shape of the fundamental shear horizontal guided wave mode (SH 0 ) make it a particularly attractive candidate for ultrasonic guided wave structural health monitoring. However, plane wave excitation of SH 0 at a high level of purity remains challenging because of the existence of the fundamental Lamb modes (A 0 and S 0 ) below the cutoff frequency thickness product of high-order modes. This paper presents a piezoelectric transducer concept optimized for plane SH 0 wave transduction based on the transducer geometry. The transducer parameter exploration was initially performed using a simple analytical model. A 3D multiphysics finite element model was then used to refine the transducer design. Finally, an experimental validation was conducted with a 3D laser Doppler vibrometer system. The analytical model, the finite element model, and the experimental measurement showed excellent agreement. The modal selectivity of SH 0 within a 20 ∘ beam opening angle at the design frequency of 425 kHz in a 1.59 mm aluminum plate was 23 dB, and the angle of the 6 dB wavefront was 86 ∘ .

Stable isotope ratio analysis for authentication of lamb meat.

PubMed

Piasentier, E; Valusso, R; Camin, F; Versini, G

2003-07-01

The effectiveness of the analysis of stable isotope ratios ((13)C/(12)C and (15)N/(14)N) in fractions of lamb meat, measured by isotope ratio mass spectrometry, was evaluated as a method of feeding and geographical origin authentication. Analyses were carried out on meat from 12 lamb types, produced in couples in six European countries (country of origin, CO) and divided in three groups according to the feeding regime during their finishing period: suckled milk only, pasture without any solid supplementation and supplementation containing maize grain (feeding regime, FR). These analyses were made on two samples of longissimus thoracis muscle, taken from the 13th rib section of the left side of two different lambs, randomly chosen between the 120 selected to represent each lamb type. δ(13)C values varied significantly in different meat fractions, the difference being higher in protein than in fat (average difference 5.0‰). However, the pairs δ(13)C values of crude fat and protein were highly correlated (r=0.976) and affected by lamb type in a similar fashion, mainly reflecting animals' feeding regime. Even δ(15)N values of meat protein fraction showed significant differences between lamb types, not dependant on the feeding regime. In fact, lambs fed on similar diets, but in different countries, gave meat with different (15)N relative abundances. These findings provide the possibility of discriminating lamb types within the same feeding regime. Canonical discriminant analysis was carried out to evaluate whether lamb meat from different CO or FR or CO×FR interaction could be mathematically distinguished by its stable isotope ratios. On the basis of CO, the corrected empirical allocation of 79.2% of the initial observations and the corrected cross-validation of two thirds of the individual meat samples was obtained. FR gave better results: 91.7% of the individual meat samples was both correctly allocated and cross-validated, indicating the high potential of

Impact of feeding saltbush twigs on feed intake, weight gain, and some mineral levels of fattening awassi lambs.

PubMed

Alazzeh, A Y; Abughazaleh, A A; Awawdeh, F T; Abdelrahman, M M; Al-Rayyan, N A

2009-07-01

This experiment was conducted to investigate the effect of the inclusion of saltbush (Atriplex sp.) on the productive performance and blood mineral profile of fattening lambs. Eighteen Awassi lambs, 70 +/- 3 days of age and 23 +/- 1.8 kg body weights, were randomly selected and divided into three equal groups. Lambs in group one (control) were offered 0.2 kg/day shredded straw of barley (tibin) as the sole source of roughage, while lambs in treatment groups 2 and 3 were provided either 0.2 kg/day Atriplex nummularia or Atriplex halimus as their sole roughage content for 10 weeks. All lambs were also provided 1.1 kg/day of concentrate ration. Although lambs fed A. halimus had significantly (P < 0.05) lower dry matter intake than the control group, the daily weight gain of the two groups of lambs were not significantly different (P > 0.05). Lambs fed either A. nummularia or A. halimus had significantly lower (P < 0.05) calcium and copper levels but significantly higher (P < 0.05) cobalt levels in their blood serum than the control group. Zinc blood serum level was not affected (P > 0.05) by the treatment diets. These results suggested that A. nummularia and A. halimus can substitute for barley straw in the ration of fattening Awassi lambs without compromising lambs weight gain; however, special attention should be given to the mineral status in lambs if saltbush is a major feed component for prolonged periods of time.

Effect of copper oxide wire particles dosage and feed supplement level on Haemonchus contortus infection in lambs.

PubMed

Burke, J M; Miller, J E; Olcott, D D; Olcott, B M; Terrill, T H

2004-09-02

The objective of the experiment was to determine the optimal dose of copper oxide wire particles (COWPs) to reduce infection of Haemonchus contortus in male lambs. Five to six-month-old hair breed lambs were housed on concrete and fed 450 (L; n = 25) or 675 g (H; n = 25) corn/soybean meal supplement and bermudagrass hay. In July, lambs were inoculated with 10,000 L(3) larvae (97% H. contortus; Day 0). Lambs were administered 0, 2, 4, or 6 g COWP on Day 28. Concentrations of copper in the liver were determined. There were no effects of supplement level on concentrations of copper in the liver and a linear relationship existed between COWP treatment and concentrations of copper in liver (P < 0.001). Least squares means of the 0, 2, 4, 6 g COWP treatments were 62.2, 135.7, 161.1, and 208.4 ppm (P < 0.001). Between Days 0 and 28, PCV declined and by Day 42, PCV of all COWP-treated lambs was markedly higher than control lambs and remained higher (COWP x day, P < 0.05). By Day 21, PCV was greater in the H compared with the L group of lambs (P < 0.001). Within 14 days of COWP treatment FEC declined from more than 8000 eggs/g (epg) to less than 250 epg in all COWP-treated lambs (COWP x day, P < 0.001). The numbers of H. contortus in the abomasum were greatly reduced in all COWP-treated groups of lambs and remaining nematodes were predominantly males. FEC were greater in L versus H supplemented lambs and values decreased to a greater extent in H lambs when treated with COWP (supplement x COWP; P < 0.02). The 2 g COWP was effective in alleviating H. contortus infection and reducing number of egg-laying nematodes in the abomasum with the lowest concentration of copper in the liver of the COWP treatment groups. PCV values were more favorable for lambs fed the higher level of supplement, especially when FEC were greater than 8000 epg.

Earthquake early warning using P-waves that appear after initial S-waves

NASA Astrophysics Data System (ADS)

Kodera, Y.

2017-12-01

As measures for underprediction for large earthquakes with finite faults and overprediction for multiple simultaneous earthquakes, Hoshiba (2013), Hoshiba and Aoki (2015), and Kodera et al. (2016) proposed earthquake early warning (EEW) methods that directly predict ground motion by computing the wave propagation of observed ground motion. These methods are expected to predict ground motion with a high accuracy even for complicated scenarios because these methods do not need source parameter estimation. On the other hand, there is room for improvement in their rapidity because they predict strong motion prediction mainly based on the observation of S-waves and do not explicitly use P-wave information available before the S-waves. In this research, we propose a real-time P-wave detector to incorporate P-wave information into these wavefield-estimation approaches. P-waves within a few seconds from the P-onsets are commonly used in many existing EEW methods. In addition, we focus on P-waves that may appear in the later part of seismic waves. Kurahashi and Irikura (2013) mentioned that P-waves radiated from strong motion generation areas (SMGAs) were recognizable after S-waves of the initial rupture point in the 2011 off the Pacific coast of Tohoku earthquake (Mw 9.0) (the Tohoku-oki earthquake). Detecting these P-waves would enhance the rapidity of prediction for the peak ground motion generated by SMGAs. We constructed a real-time P-wave detector that uses a polarity analysis. Using acceleration records in boreholes of KiK-net (band-pass filtered around 0.5-10 Hz with site amplification correction), the P-wave detector performed the principal component analysis with a sliding window of 4 s and calculated P-filter values (e.g. Ross and Ben-Zion, 2014). The application to the Tohoku-oki earthquake (Mw 9.0) showed that (1) peaks of P-filter that corresponded to SMGAs appeared in several stations located near SMGAs and (2) real-time seismic intensities (Kunugi et al

High frequency guided wave propagation in monocrystalline silicon wafers

NASA Astrophysics Data System (ADS)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2017-04-01

Monocrystalline silicon wafers are widely used in the photovoltaic industry for solar panels with high conversion efficiency. The cutting process can introduce micro-cracks in the thin wafers and lead to varying thickness. High frequency guided ultrasonic waves are considered for the structural monitoring of the wafers. The anisotropy of the monocrystalline silicon leads to variations of the wave characteristics, depending on the propagation direction relative to the crystal orientation. Full three-dimensional Finite Element simulations of the guided wave propagation were conducted to visualize and quantify these effects for a line source. The phase velocity (slowness) and skew angle of the two fundamental Lamb wave modes (first anti-symmetric mode A0 and first symmetric mode S0) for varying propagation directions relative to the crystal orientation were measured experimentally. Selective mode excitation was achieved using a contact piezoelectric transducer with a custom-made wedge and holder to achieve a controlled contact pressure. The out-of-plane component of the guided wave propagation was measured using a noncontact laser interferometer. Good agreement was found with the simulation results and theoretical predictions based on nominal material properties of the silicon wafer.

Single Sustained Inflation followed by Ventilation Leads to Rapid Cardiorespiratory Recovery but Causes Cerebral Vascular Leakage in Asphyxiated Near-Term Lambs

PubMed Central

Sobotka, Kristina S.; Hooper, Stuart B.; Crossley, Kelly J.; Ong, Tracey; Schmölzer, Georg M.; Barton, Samantha K.; McDougall, Annie R. A.; Miller, Suzie L.; Tolcos, Mary; Klingenberg, Claus; Polglase, Graeme R.

2016-01-01

Background A sustained inflation (SI) rapidly restores cardiac function in asphyxic, bradycardic newborns but its effects on cerebral haemodynamics and brain injury are unknown. We determined the effect of different SI strategies on carotid blood flow (CaBF) and cerebral vascular integrity in asphyxiated near-term lambs. Methods Lambs were instrumented and delivered at 139 ± 2 d gestation and asphyxia was induced by delaying ventilation onset. Lambs were randomised to receive 5 consecutive 3 s SI (multiple SI; n = 6), a single 30 s SI (single SI; n = 6) or conventional ventilation (no SI; n = 6). Ventilation continued for 30 min in all lambs while CaBF and respiratory function parameters were recorded. Brains were assessed for gross histopathology and vascular leakage. Results CaBF increased more rapidly and to a greater extent during a single SI (p = 0.01), which then decreased below both other groups by 10 min, due to a higher cerebral oxygen delivery (p = 0.01). Blood brain barrier disruption was increased in single SI lambs as indicated by increased numbers of blood vessel profiles with plasma protein extravasation (p = 0.001) in the cerebral cortex. There were no differences in CaBF or cerebral oxygen delivery between the multiple SI and no SI lambs. Conclusions Ventilation with an initial single 30 s SI improves circulatory recovery, but is associated with greater disruption of blood brain barrier function, which may exacerbate brain injury suffered by asphyxiated newborns. This injury may occur as a direct result of the initial SI or to the higher tidal volumes delivered during subsequent ventilation. PMID:26765258

Reflection and transmission coefficients for guided waves reflected by defects in viscoelastic material plates.

PubMed

Hosten, Bernard; Moreau, Ludovic; Castaings, Michel

2007-06-01

The paper presents a Fourier transform-based signal processing procedure for quantifying the reflection and transmission coefficients and mode conversion of guided waves diffracted by defects in plates made of viscoelastic materials. The case of the S(0) Lamb wave mode incident on a notch in a Perspex plate is considered. The procedure is applied to numerical data produced by a finite element code that simulates the propagation of attenuated guided modes and their diffraction by the notch, including mode conversion. Its validity and precision are checked by the way of the energy balance computation and by comparison with results obtained using an orthogonality relation-based processing method.

Guided wave propagation in metallic and resin plates loaded with water on single surface

NASA Astrophysics Data System (ADS)

Hayashi, Takahiro; Inoue, Daisuke

2016-02-01

Our previous papers reported dispersion curves for leaky Lamb waves in a water-loaded plate and wave structures for several typical modes including quasi-Scholte waves [1,2]. The calculations were carried out with a semi-analytical finite element (SAFE) method developed for leaky Lamb waves. This study presents SAFE calculations for transient guided waves including time-domain waveforms and animations of wave propagation in metallic and resin water-loaded plates. The results show that non-dispersive and non-attenuated waves propagating along the interface between the fluid and the plate are expected for effective non-destructive evaluation of such fluid-loaded plates as storage tanks and transportation pipes. We calculated transient waves in both steel and polyvinyl chloride (PVC) plates loaded with water on a single side and input dynamic loading from a point source on the other water-free surface as typical examples of metallic and resin plates. For a steel plate, there exists a non-dispersive and non-attenuated mode, called the quasi-Scholte wave, having an almost identical phase velocity to that of water. The quasi-Scholte wave has superior generation efficiency in the low frequency range due to its broad energy distribution across the plate, whereas it is localized near the plate-water interface at higher frequencies. This means that it has superior detectability of inner defects. For a PVC plate, plural non-attenuated modes exist. One of the non-attenuated modes similar to the A0 mode of the Lamb wave in the form of a group velocity dispersion curve is promising for the non-destructive evaluation of the PVC plate because it provides prominent characteristics of generation efficiency and low dispersion.

The Productivity of Male Thin-Tailed Lambs and Sheep Fed Complete Feed

NASA Astrophysics Data System (ADS)

Aluns, M. S.; Luthfi, N.

2018-02-01

The aim of this study is to examine the productivity of thin tailed lambs and sheep fed complete feed. The material used in this study were 6 thin tailed lambs aged ± 5 months with an average body weight of 15.41 ± 2.11 kg (CV 37.04%) and 6 thin tailed rams aged ± 1 year with an average body weight of 23, 01 ± 1.91 kg (CV 28.83%). The animals were raised intensively with complete feed as much as 3.5% of body weight. The feed contained 12% crude protein (CP) and 55% Total Digestible Nutrients (TDNs). The results showed that the average feed intake was 567.10 g DMI/d in lambs and 726.24 g DMI per day in sheep. An average of body gain of lambs was 0.02 kg/d and 0.01 kg/d. The day matter digestibility of lambs achieves 50.23% and 50.74% in sheep. Based on results, it can be inferred that lambs has same digestibility with sheep and has more efficient to be fattened than sheep.

Changes in concentrations of trace minerals in lambs fed sericea lespedeza leaf meal pellets with or without dietary sodium molybdate.

PubMed

Acharya, M; Burke, J M; Coffey, K P; Kegley, E B; Miller, J E; Smyth, E; Welborn, M G; Terrill, T H; Mosjidis, J A; Rosenkrans, C

2016-04-01

Prolonged feeding of sericea lespedeza (SL) previously led to reduced serum concentrations of Mo, a cofactor in an enzyme complex that may be involved in weight gain. The current objective was to determine the effect of Mo supplementation on changes in serum, fecal, urine, and liver concentrations of trace minerals in lambs fed SL leaf meal pellets. Thirty ram lambs weaned in May (84 ± 1.5 d of age and 27 ± 1.1 kg; D 0) were blocked by BW, breed type (full or three-fourths Katahdin), and EBV of parasite resistance and randomly assigned to be fed 900 g/d of an alfalfa-based supplement (CON; = 10) or a SL-based supplement ( = 20) for 103 d. Supplements were formulated to be isonitrogenous and isocaloric and to meet trace mineral requirements. Within the SL group, individual lambs were administered either 5 mL water or 5 mL of water with 163.3 mg of sodium molybdate (SLMO). Serum was collected on d 28, 56, and 104; a liver sample was collected by biopsy on d 104 to determine concentrations of trace minerals. Data were analyzed using a mixed model and orthogonal contrasts. Serum concentrations of Mo increased in response to the drench and were greatest in SLMO lambs and then CON lambs and lowest in SL lambs ( < 0.001). Concentrations of Mo in the liver ( < 0.001) were similar between CON and SLMO lambs and were lower in SL lambs than other groups. Serum ( < 0.001) and liver ( = 0.013) concentrations of zinc (Zn) were reduced in both SL and SLMO lambs compared with CON lambs. Serum concentrations of cobalt (Co) increased in CON lambs compared with SL and SLMO lambs between d 0 and 56 but were similar on d 104 (diet × day, < 0.005) as with concentrations in the liver. Serum and liver concentrations of copper (Cu) were greatest ( < 0.001 and < 0.001, respectively) in CON lambs followed by SL lambs and then SLMO lambs. Serum concentrations of selenium (Se) tended ( = 0.10) to be reduced in SL lambs compared with CON and SLMO lambs, but concentrations in the liver were

Fattening performance, carcass and meat quality characteristics of Kivircik male lambs.

PubMed

Gökdal, Ozdal; Atay, Okan; Eren, Vadullah; Demircioğlu, Sibel Karaca

2012-10-01

The objective of this study was to determine the fattening performance and carcass and meat quality characteristics of Kivircik twin male lambs. Twelve lambs at approximately 5 months of age were subjected to a finishing diet for 60 days. Average live weight of lambs at the beginning and the end of the fattening were 23.14 ± 0.84 and 39.0 ± 1.01 kg, respectively. Daily live weight gain and feed conversion efficiency were found as 0.265 ± 0.007 and 6.14 kg, respectively. Hot carcass weight, cold carcass weight, and dressing percentage were 19.6 ± 0.6 and 18.9 ± 0.6 kg and 48.1 ± 0.3%, respectively. Kidney-pelvic fat weight, internal fat weight, and m. longissimus dorsi area were 0.117 ± 0.023 and 0.364 ± 0.041 kg and 15.26 ± 0.70 cm(2), respectively. The percentages of leg, back loin, forearm, shoulder, neck, flank-chest, kidney-pelvic fat, and internal fat in carcasses of the lambs were found as 34.1 ± 0.4%, 19.6 ± 0.3%, 21.0 ± 0.2%, 7.0 ± 0.3%, 10.5 ± 0.3%, 7.2 ± 0.2%, 1.3 ± 0.1%, and 1.8 ± 0.1%, respectively. Averages water content, ash, protein content, and fat content of meat samples were 73.4%, 1.0%, 19.5% and 3.6%, respectively. pH and thiobarbituric acid reactive substances values of meat samples were 5.55 and 0.056 ± 0.017. L*(lightness), a*(redness), and b*(yellowness) values were recorded as 43.87, 12.69, and 10.22, respectively. Thus, we conclude that fattening performance, carcass, and meat quality of Kivircik lambs are satisfactory levels than that of other native breeds.

Intake, digestibility, nitrogen balance, performance, and carcass yield of lambs fed licuri cake.

PubMed

Costa, J B; Oliveira, R L; Silva, T M; Ribeiro, R D X; Silva, A M; Leão, A G; Bezerra, L R; Rocha, T C

2016-07-01

This study aimed to determine the impact of the inclusion of licuri cake in the diets of crossbred Santa Inês lambs, based on intake, digestibility, N balance, urea N, and performance. We used 44 male lambs that were vaccinated and wormed, with an average age of 6 mo and an average BW of 21.2 kg ± 2.7 kg. The lambs were fed a mixture of Tifton-85 hay (40%) and a concentrated mixture (60%) composed of ground corn, soybean meal, and mineral premix. For the treatments, licuri cake was added at levels of 0, 8, 16, and 24% of DM, with the licuri cake replacing soybean meal and ground corn. We used 11 lambs per treatment in a randomized design. The lambs were confined for 70 d, and the digestibility trial occurred between Day 40 and Day 55. The increased level of licuri cake inclusion promoted a linear reduction in DM intake ( = 0.00) with a 39% reduction between treatments with the 0 and 24% cakes. On the other hand, ether extract () consumption showed an initial quadratic increase ( = 0.00). The total weight gain and ADG showed a linear decrease ( = 0.00) with the addition of licuri cake. The inclusion of licuri cake linearly enhanced ( = 0.02) the digestibility of CP and EE, whereas the digestibility of other nutrients in lambs remained unchanged ( > 0.05). The licuri cake increase led to a linear decrease ( < 0.05) in the N intake, fecal N, and retained N in lambs. Urinary N was not changed. The slaughter carcass weight, HCW, cold carcass weight, hot carcass yield, and cold carcass yield showed linear decreases ( < 0.05) with the addition of licuri cake. Carcass morphometric measurements were influenced by experimental diets, showing linear decreases ( < 0.05) with the addition of licuri cake to diets. The fat thickness, conformation, external length, internal length, leg length, rump width, and chest circumference showed linear decreases ( < 0.05) with the inclusion of licuri cake in diets. The inclusion of licuri cake decreased DMI and digestibility, reflecting

Perinatal lamb mortality: an assessment of gross, histological and immunohistochemical changes in the central nervous system.

PubMed

Lashley, Vd; Roe, Wd; Kenyon, Pr; Thompson, Kg

2014-05-01

To compare the vascular and neuronal changes in the central nervous system (CNS) of lambs that died in the first 3 days after birth, from various causes, with control lambs subject to euthanasia. Dead lambs (n=65) were collected daily during the period 07 September 2010 to 26 September 2010 from a flock of 200 twin-lamb-bearing ewes. Age-matched lambs from the same flock were subject to euthanasia as a control group (n=39). Necropsies were conducted on all study lambs. The cause of death in lambs found dead was categorised as starvation-mismothering-exposure complex (SME), dystocia, or other, based on gross necropsy findings. Deaths were categorised as SME in lambs with necropsy lesions of pericardial, perirenal and mesenteric fat catabolism, an empty gastrointestinal tract and completely inflated lungs. Dystocia was diagnosed by the presence of a swollen tongue, injected sclera and subcutaneous oedema and haemorrhage around the head and neck or hind limbs. Deaths were categorised as other if an obvious cause of death could not be ascertained and if evidence of infection was identified. The CNS of each lamb necropsied was assessed grossly for haemorrhage, and using histopathology to determine vascular and neuronal changes. Immunohistochemistry was performed on selected cases (n=36) to confirm neuronal death. Of the 65 lambs found dead, 16 (25%) had evidence of cerebral and spinal meningeal haemorrhage, whereas of the 39 clinically normal control lambs, all displayed gross evidence of cerebral and spinal meningeal haemorrhage. There was no evidence of parenchymal vacuolation, neuronal vacuolation or ischaemic neurons in any of the lamb brain sections including those that died with evidence of dystocia. There was no difference, within the regions examined, in mean vascular score between lambs categorised by cause of death (p>0.05). The overall mean vascular score for the brain stem was greater than the mid brain (p=0.02) and the cortex (p=0.005) but did not differ

Effects of Electrical Stimulation on Meat Quality of Lamb and Goat Meat

PubMed Central

Cetin, Omer; Bingol, Enver Baris; Colak, Hilal; Hampikyan, Hamparsun

2012-01-01

Effect of various voltage of electrical stimulation (ES) on meat quality of lamb and goat was investigated by using a total of 36 animals at 3–5 years old. Constant 50 Hz frequency and 50, 100, and 250 V, 90 sec of ES were administered to 1/2 carcasses and were examined according their textural, physicochemical, and sensorial characteristics. ES decreased the pH values of lamb and goat meat, and accelerated the rigor mortis (P < 0.05). Additionally, ES enhanced the water activity, water-holding capacity, and drip loss of both animals. Shear force varied between lamb and goat meat, and tenderness was improved depending on voltage range used (P < 0.001). ES caused difference in instrumental colour (CIE L ∗, a ∗, b ∗) values of lamb and goat meat compared with the control groups (P < 0.05) during aging period at 4°C. Sensorial characteristics were also improved with various levels of ES treatments. In conclusion, ES had positive effects on meat quality of lamb and goat, in contrast to undesirable consumer preferences. PMID:22593699

Effects of electrical stimulation on meat quality of lamb and goat meat.

PubMed

Cetin, Omer; Bingol, Enver Baris; Colak, Hilal; Hampikyan, Hamparsun

2012-01-01

Effect of various voltage of electrical stimulation (ES) on meat quality of lamb and goat was investigated by using a total of 36 animals at 3-5 years old. Constant 50 Hz frequency and 50, 100, and 250 V, 90 sec of ES were administered to 1/2 carcasses and were examined according their textural, physicochemical, and sensorial characteristics. ES decreased the pH values of lamb and goat meat, and accelerated the rigor mortis (P < 0.05). Additionally, ES enhanced the water activity, water-holding capacity, and drip loss of both animals. Shear force varied between lamb and goat meat, and tenderness was improved depending on voltage range used (P < 0.001). ES caused difference in instrumental colour (CIE L*a*b*) values of lamb and goat meat compared with the control groups (P < 0.05) during aging period at 4°C. Sensorial characteristics were also improved with various levels of ES treatments. In conclusion, ES had positive effects on meat quality of lamb and goat, in contrast to undesirable consumer preferences.

Finite element simulation of core inspection in helicopter rotor blades using guided waves.

PubMed

Chakrapani, Sunil Kishore; Barnard, Daniel; Dayal, Vinay

2015-09-01

This paper extends the work presented earlier on inspection of helicopter rotor blades using guided Lamb modes by focusing on inspecting the spar-core bond. In particular, this research focuses on structures which employ high stiffness, high density core materials. Wave propagation in such structures deviate from the generic Lamb wave propagation in sandwich panels. To understand the various mode conversions, finite element models of a generalized helicopter rotor blade were created and subjected to transient analysis using a commercial finite element code; ANSYS. Numerical simulations showed that a Lamb wave excited in the spar section of the blade gets converted into Rayleigh wave which travels across the spar-core section and mode converts back into Lamb wave. Dispersion of Rayleigh waves in multi-layered half-space was also explored. Damage was modeled in the form of a notch in the core section to simulate a cracked core, and delamination was modeled between the spar and core material to simulate spar-core disbond. Mode conversions under these damaged conditions were examined numerically. The numerical models help in assessing the difficulty of using nondestructive evaluation for complex structures and also highlight the physics behind the mode conversions which occur at various discontinuities. Copyright © 2015 Elsevier B.V. All rights reserved.

Hypercalcemia and hypervitaminosis D in two lambs.

PubMed

Roberson, J R; Swecker, W S; Hullender, L L

2000-04-01

Twin 17-day-old crossbred male lambs were examined to determine the cause of weakness and failure to thrive. Hypercalcemia attributable to hypervitaminosis D was diagnosed. The milk replacer or an accidental overdose of an injectable vitamin D product was suspected to be the source, although a definite cause was not confirmed. Lambs responded favorably to palliative treatment (administration of saline [0.9% NaCl] solution to induce calcium diuresis) and changing the diet to another milk replacer.

Infrared thermal imaging as a method to evaluate heat loss in newborn lambs.

PubMed

Labeur, L; Villiers, G; Small, A H; Hinch, G N; Schmoelzl, S

2017-12-01

Thermal imaging technology has been identified as a potential method for non-invasive study of thermogenesis in the neonatal lamb. In comparison to measurement of the core body temperature, infrared thermography may observe thermal loss and thermogenesis linked to subcutaneous brown fat depots. This study aimed to identify a suitable method to measure heat loss in the neonatal lamb under a cold challenge. During late pregnancy (day 125), ewes were subjected to either shearing (n=15) or mock handling (sham-shorn for 2min mimicking the shearing movements) (n=15). Previous studies have shown an increase in brown adipose tissue deposition in lambs born to ewes shorn during pregnancy and we hypothesized that the shearing treatment would impact thermoregulatory capacities in newborn lambs. Lambs born to control ewes (n=14; CONTROL) and shorn ewes (n=13; SHORN) were subjected to a cold challenge of 1h duration at 4h after birth. During the cold challenge, thermography images were taken every 10min, from above, at a fixed distance from the dorsal midline. On each image, four fixed-size areas were identified (shoulder, mid loin, hips and rump) and the average and maximum temperatures of each recorded. In all lambs, body surface temperature decreased over time. Overall the SHORN lambs appeared to maintain body surface temperature better than CONTROL lambs, while CONTROL lambs appeared to have higher core temperature. At 30min post cold challenge SHORN lambs tended to have higher body surface temperatures than lambs (P=0.0474). Both average and maximum temperatures were highest at the hips. Average temperature was lowest at the shoulder (P<0.05), while maximum temperatures were lowest at both shoulder and rump (P<0.005). These results indicate that lambs born to shorn ewes maintained their radiated body surface temperature better than CONTROL lambs. In conjunction with core temperature changes under cold challenge, this insight will allow us to understand whether increased

Characteristics of lambs fed concentrates or grazed on ryegrass to traditional or heavy slaughter weights. II. Wholesale cuts and tissue accretion.

PubMed

Borton, R J; Loerch, S C; McClure, K E; Wulf, D M

2005-06-01

Targhee x Hampshire lambs (average BW 24 +/- 1 kg) were used to determine the effect of finishing on concentrate or by grazing ryegrass forage on slaughter weights of 52 kg (N) or 77 kg (H) on tissue accretion and lamb wholesale cutout. When fed to similar slaughter weights, the wholesale cuts of concentrate-fed lambs were heavier (P < 0.05) than the same cuts from forage-fed lambs; however, when expressed as a percentage of side weight, carcasses of forage-fed lambs had a higher (P < 0.001) percentage of leg than concentrate-fed lambs. Increasing slaughter weight from 52 to 77 kg resulted in a 1-kg increase in loin weight for lambs finished on concentrate and a 0.60-kg increase for lambs finished on forage (diet x slaughter weight, P < 0.03); however, the increased loin weight for lambs finished on concentrate was due largely to increased fat deposition. For lambs slaughtered at 77 kg, those finished on forage had more lean mass in the leg, loin, rack, and shoulder than those finished on concentrate, but lean mass in these cuts did not differ between diets for lambs slaughtered at 52 kg (diet x slaughter weight, P < 0.01). At the normal slaughter weight (52 kg), concentrate-fed lambs had 50% more dissectible fat than forage-fed lambs, whereas at the heavy slaughter weight, a 79% greater amount of dissectible fat was observed for concentrate- vs. forage-fed lambs (diet x slaughter weight, P < 0.001). Lean and fat accretion rates were higher (P < 0.001) for concentrate-fed lambs than for forage-fed lambs. The lean-to-fat ratio of forage-fed lambs was higher (P < 0.001) than that of concentrate-fed lambs; however, forage finishing decreased accretion rates of all tissues compared with concentrate feeding, and these differences between forage and concentrate feeding were magnified at heavier slaughter weights.

The Effect of Concentrate Supplementation on Creatinine Excretion in Thin-Tailed Lambs and Sheep

NASA Astrophysics Data System (ADS)

Purnami, N. A.; Prima, A.

2018-02-01

An experimental study was carried out to examine the effect of concentrates supplementation on creatinine excretion in lambs and sheep. The study used 8 male thin tailed lambs (aged ±3-4 months, weighed ±15.20 kg) and 8 sheep (aged ±1 year and weighed ±22.71kg). The animals were fed the diet contained 100% napier grass (100G) and 50% napier grass 50% concentrate as much as 3.5% of body weight (50G50C). This study used a complete randomized nested design. The parameters observed were dry matter intake (DMI) and creatinine excretion. The results showed that the diet significantly affect (P<0.05) DMI. The consumption of 100G was lower than that of 50G50C both lambs (0.32 vs 0.62 kg/d) and sheep (0.47 vs 0.88 kg/d). On the other hand, the diet did not affect the creatinine excretion (P 0.05) either G100 or G50C50 in lambs or sheep. However, the creatinine excretion in sheep (185.66 mg/d) was higher than that of lambs (299.1 md/d) (P<0.05). It can be concluded that concentrate supplementation of grass diet increased DMI but did not affect creatinine excretion. The creatinine excretion of sheep was higher than that of lambs .

Interaction between a tannin-containing legume and endophyte-infected tall fescue seed on lambs' feeding behavior and physiology.

PubMed

Villalba, J J; Spackman, C; Goff, B M; Klotz, J L; Griggs, T; MacAdam, J W

2016-02-01

It was hypothesized that a tannin-rich legume such as sainfoin attenuates the negative postingestive effects of ergot alkaloids in tall fescue. Thirty-two 4-mo-old lambs were individually penned and randomly assigned to a 2 × 2 factorial arrangement with 2 legume species, sainfoin (SAN; 2.9% condensed tannins) or cicer milkvetch (CIC; without tannins) and a mixed ration containing tall fescue seed (50:30:20 seed:beet pulp:alfalfa) with 2 levels of endophyte infection (endophyte-infected tall fescue seed [E+; 3,150 ug/L ergovaline] or endophyte-free tall fescue seed [E-]). For a 10-d baseline period, half of the lambs were fed SAN and half were fed CIC and all lambs had ad libitum amounts of E-. In an ensuing 10-d experimental period, the protocol was the same except half of the lambs fed SAN or CIC received E+ instead of E-. Subsequently, all lambs could choose between their respective legume and seed-containing ration and between E+ and E-. Finally, an in vitro radial diffusion assay was conducted to determine whether tannins isolated from SAN would bind to alkaloids isolated from E+. All groups consumed similar amounts of E- during baseline period ( > 0.10), but lambs ate more E- than E+ during the experimental period ( < 0.05) and lambs offered SAN ate more E+ than lambs offered CIC ( < 0.05). Groups fed E- during the baseline and experimental periods had similar rectal temperatures ( > 0.10), but lambs fed E+ had lower rectal temperatures per gram of feed ingested when supplemented with SAN than with CIC ( < 0.05). Lambs fed E+ had greater concentrations of hemoglobin and more red blood cells than lambs fed E- ( < 0.05), but plasmatic concentrations of cortisol and prolactin did not differ among treatments ( > 0.10). All lambs preferred their treatment ration over their treatment legume, but lambs in the SAN and E+ treatment ate more legume + ration than lambs in the CIC and E+ (CIC-E+; < 0.05) treatment. All lambs preferred E- over E+, but lambs in the CIC

A Nonparametric Approach to Automated S-Wave Picking

NASA Astrophysics Data System (ADS)

Rawles, C.; Thurber, C. H.

2014-12-01

Although a number of very effective P-wave automatic pickers have been developed over the years, automatic picking of S waves has remained more challenging. Most automatic pickers take a parametric approach, whereby some characteristic function (CF), e.g. polarization or kurtosis, is determined from the data and the pick is estimated from the CF. We have adopted a nonparametric approach, estimating the pick directly from the waveforms. For a particular waveform to be auto-picked, the method uses a combination of similarity to a set of seismograms with known S-wave arrivals and dissimilarity to a set of seismograms that do not contain S-wave arrivals. Significant effort has been made towards dealing with the problem of S-to-P conversions. We have evaluated the effectiveness of our method by testing it on multiple sets of microearthquake seismograms with well-determined S-wave arrivals for several areas around the world, including fault zones and volcanic regions. In general, we find that the results from our auto-picker are consistent with reviewed analyst picks 90% of the time at the 0.2 s level and 80% of the time at the 0.1 s level, or better. For most of the large datasets we have analyzed, our auto-picker also makes far more S-wave picks than were made previously by analysts. We are using these enlarged sets of high-quality S-wave picks to refine tomographic inversions for these areas, resulting in substantial improvement in the quality of the S-wave images. We will show examples from New Zealand, Hawaii, and California.

Techniques for capturing bighorn sheep lambs

USGS Publications Warehouse

Smith, Joshua B.; Walsh, Daniel P.; Goldstein, Elise J.; Parsons, Zachary D.; Karsch, Rebekah C.; Stiver, Julie R.; Cain, James W.; Raedeke, Kenneth J.; Jenks, Jonathan A.

2014-01-01

Low lamb recruitment is a major challenge facing managers attempting to mitigate the decline of bighorn sheep (Ovis canadensis), and investigations into the underlying mechanisms are limited because of the inability to readily capture and monitor bighorn sheep lambs. We evaluated 4 capture techniques for bighorn sheep lambs: 1) hand-capture of lambs from radiocollared adult females fitted with vaginal implant transmitters (VITs), 2) hand-capture of lambs of intensively monitored radiocollared adult females, 3) helicopter net-gunning, and 4) hand-capture of lambs from helicopters. During 2010–2012, we successfully captured 90% of lambs from females that retained VITs to ≤1 day of parturition, although we noted differences in capture rates between an area of high road density in the Black Hills (92–100%) of South Dakota, USA, and less accessible areas of New Mexico (71%), USA. Retention of VITs was 78% with pre-partum expulsion the main cause of failure. We were less likely to capture lambs from females that expelled VITs ≥1 day of parturition (range = 80–83%) or females that were collared without VITs (range = 60–78%). We used helicopter net-gunning at several sites in 1999, 2001–2002, and 2011, and it proved a useful technique; however, at one site, attempts to capture lambs led to lamb predation by golden eagles (Aquila chrysaetos). We attempted helicopter hand-captures at one site in 1999, and they also were successful in certain circumstances and avoided risk of physical trauma from net-gunning; however, application was limited. In areas of low accessibility or if personnel lack the ability to monitor females and/or VITs for extended periods, helicopter capture may provide a viable option for lamb capture.

Temporal change in shallow subsurface P- and S-wave velocities and S-wave anisotropy inferred from coda wave interferometry

NASA Astrophysics Data System (ADS)

Yamamoto, M.; Nishida, K.; Takeda, T.

2012-12-01

Recent progresses in theoretical and observational researches on seismic interferometry reveal the possibility to detect subtle change in subsurface seismic structure. This high sensitivity of seismic interferometry to the medium properties may thus one of the most important ways to directly observe the time-lapse behavior of shallow crustal structure. Here, using the coda wave interferometry, we show the co-seismic and post-seismic changes in P- and S-wave velocities and S-wave anisotropy associated with the 2011 off the Pacific coast of Tohoku earthquake (M9.0). In this study, we use the acceleration data recorded at KiK-net stations operated by NIED, Japan. Each KiK-net station has a borehole whose typical depth is about 100m, and two three-component accelerometers are installed at the top and bottom of the borehole. To estimate the shallow subsurface P- and S-wave velocities and S-wave anisotropy between two sensors and their temporal change, we select about 1000 earthquakes that occurred between 2004 and 2012, and extract body waves propagating between borehole sensors by computing the cross-correlation functions (CCFs) of 3 x 3 component pairs. We use frequency bands of 2-4, 4-8, 8-16 Hz in our analysis. Each averaged CCF shows clear wave packets traveling between borehole sensors, and their travel times are almost consistent with those of P- and S-waves calculated from the borehole log data. Until the occurrence of the 2011 Tohoku earthquake, the estimated travel time at each station is rather stable with time except for weak seasonal/annual variation. On the other hand, the 2011 Tohoku earthquake and its aftershocks cause sudden decrease in the S-wave velocity at most of the KiK-net stations in eastern Japan. The typical value of S-wave velocity changes, which are measured by the time-stretching method, is about 5-15%. After this co-seismic change, the S-wave velocity gradually recovers with time, and the recovery continues for over one year following the

Coding and quantification of a facial expression for pain in lambs.

PubMed

Guesgen, M J; Beausoleil, N J; Leach, M; Minot, E O; Stewart, M; Stafford, K J

2016-11-01

human observers scored the images from Experiment II. Changes in facial action units were also quantified objectively by a researcher using image measurement software. In both experiments LGS scores were analyzed using a linear MIXED model to evaluate the effects of tail docking on observers' perception of facial expression changes. Kendall's Index of Concordance was used to measure reliability among observers. In Experiment I, human observers were able to use the LGS to differentiate docked lambs from control lambs. LGS scores significantly increased from before to after treatment in docked lambs but not control lambs. In Experiment II there was a significant increase in LGS scores after docking. This was coupled with changes in other validated indicators of pain after docking in the form of pain-related behaviour. Only two components, Mouth Features and Orbital Tightening, showed significant quantitative changes after docking. The direction of these changes agree with the description of these facial action units in the LGS. Restraint affected people's perceptions of pain as well as quantitative measures of LGS components. Freely moving lambs were scored lower using the LGS over both periods and had a significantly smaller eye aperture and smaller nose and ear angles than when they were held. Agreement among observers for LGS scores were fair overall (Experiment I: W=0.60; Experiment II: W=0.66). This preliminary study demonstrates changes in lamb facial expression associated with pain. The results of these experiments should be interpreted with caution due to low lamb numbers. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of aflatoxin on performance, hematology, and clinical immunology in lambs.

PubMed Central

Fernández, A; Hernández, M; Verde, M T; Sanz, M

2000-01-01

Twenty-four female lambs were intoxicated with a diet contaminated with 2 ppm aflatoxin for a period of 37 d. Twelve lambs were maintained as the control group. After this period, the lambs were left for 35 d without aflatoxin in their feed. Performance, hematology and clinical immunology were examined in the intoxicated lambs. A non-significant decrease in body weight was observed in the intoxicated lambs during the intoxication period, whereas a significant decrease (P<0.001) in average daily gain was noted on the last day of intoxication and during the clearance period. No significant differences were observed in erythrocyte count, white blood cell count or differential leukocyte count between the groups. Bacteriostatic activity of the serum was lower in the intoxicated lambs, however, there was no effect on serum opsonic activity. Phagocytosis by the neutrophils was higher during the intoxication period and the levels of IgG were elevated in the intoxicated lambs. In vivo cellular immunity was assessed by intradermal injection of phytohemagglutinin; the response was lower during intoxication period. These results indicate that a lowering in the average daily gain was the most sensitive indicator of aflatoxicosis in lambs, and that the immune response was altered, which could render the animals more susceptible to infectious diseases. PMID:10680657

Effect of feeding Mucuna pruriens on helminth parasite infestation in lambs.

PubMed

Huisden, C M; Adesogan, A T; Gaskin, J M; Courtney, C H; Raji, A M; Kang, T

2010-02-17

Mucuna pruriens is a tropical legume anecdotally reputed to have anthelmintic properties. This study was conducted to examine the validity of such claims. The aim of this study was to determine if ingestion of Mucuna seeds reduces helminth parasite infestation in lambs. Thirty-six Dorper x Katahdin ram lambs were assigned to three treatments, a cottonseed meal based control diet, a diet in which Mucuna replaced cottonseed meal and the control diet with levamisole (7.5mg/kg body weight) administration. All diets were isonitrogenous and isocaloric. The 12 lambs in each treatment were assigned randomly to 4 pens, each containing 3 lambs. Lambs were trickle infected three times per week by gavage with infectious Haemonchus contortus larvae (2000 larvae/lamb) for 3 weeks. Levamisole treatment decreased fecal egg counts by 87% and abomasal worm counts by 83%. Mucuna intake did not statistically affect fecal egg counts or abomasal worm counts, though numerical (P>0.10) reductions of 7.4% and 18.1%, respectively were evident. Anemia indicators, feed intake, and lamb growth were unaffected by treatment. Levamisole reduced the Haemonchus parasite burden in lambs significantly but feeding Mucuna reduced the burden by levels unlikely to eliminate the clinical effects of parasitism. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

Effects of sunflower soap stocks on light lamb meat quality.

PubMed

Blanco, C; Giráldez, J F; Morán, L; Mateo, J; Villalobos-Delgado, L H; Andrés, S; Bodas, R

2017-08-01

Thirty-two lambs were used to study the effect of sunflower soap stocks (SS), a by-product from the vegetable oil refinery industry, on meat chemical composition, fatty acid profile, volatile compounds, and consumer acceptability. Lambs were finished (average length of fattening period 35 ± 7.3 d, 26.8 ± 0.09 kg final BW) on a pelleted total mixed ration (TMR) with no SS (00SS) or including 15, 30 or 60 g SS/kg (15SS, 30SS, and 60SS, respectively). Sunflower soap stocks decreased the percentage of SFA, increased the proportion of -MUFA ( < 0.05), and modified the levels of several odor-active lipid-derived volatile compounds ( 0.05). Consumers were able to distinguish between control and 15SS meat samples in a triangular test ( < 0.05), but a well-defined preference for meat of any of these treatments was not exhibited ( > 0.05). Atherogenicity and saturation indexes decreased by 31% and 27%, respectively, in SS groups compared to control (linear 0.05). However, certain volatile compounds (benzene and toluene) and 10-18:1 fatty acid, known potential hazards for human health, were increased in meat from lambs fed TMR with SS. For this reason, only inclusion rates up to 15 g SS/kg TMR seem to sustain a satisfactory balance between beneficial and detrimental effects on lamb meat composition and quality.

Environmental impacts on offspring survival during the lambing period in central Patagonia

NASA Astrophysics Data System (ADS)

Coronato, F.

Weather conditions are the main factors affecting the survival rate of newborn lambs. In the windy climate of Patagonia, the influence of weather conditions is exacerbated as the wind speed increases noticeably in spring. If the wind increases faster than the temperature rises, wind chill conditions worsen temporarily. This departure from the predictable improvement in bioclimatic conditions as the season moves towards summer may coincide with lambing, if this is not adequately regulated. This paper explores bioclimatic conditions during the 2-month period in which lambing may take place (i.e. mid-September to mid-November), and identifies the unfavourable period that occurs in the second fortnight of October. Starting from the Mount and Brown (Agric Meteorol 27:241-255, 1982) model to assess thermal stress in sheep by means of common meteorological records, a simpler model was developed employing in long-term records. For 2-week averages of temperature (Tf), wind speed (Vf) and total precipitation (Pf), the average heat loss in sheep (HLf) was 40.40-2.07Tf+5.64Vf+0.04Pf. (r2=0.95). A 24-year series of Tf, Vf and Pf data was employed in the calculation of HLf, and results showed this parameter was significantly higher in the second fortnight in October. HLf values were classified into four groups (from ''very good'' to ''very bad'' conditions); once again, significant differences appeared in the second fortnight in October. Finally, HLf during the lambing period was correlated to the percentage of lambs surviving 2 months later. Significant differences between the survival of lambs born under ''very bad'' and ''very good'' conditions were found, but intermediate HLf conditions did not show a clear pattern. The survival rate was best correlated to HLf in the fortnight preceding lambing (P<0.05). This suggests that bioclimatic conditions during late pregnancy are at least as important as conditions during lambing in determining the survival lambs.

Numerical predictions and experiments for optimizing hidden corrosion detection in aircraft structures using Lamb modes.

PubMed

Terrien, N; Royer, D; Lepoutre, F; Déom, A

2007-06-01

To increase the sensitivity of Lamb waves to hidden corrosion in aircraft structures, a preliminary step is to understand the phenomena governing this interaction. A hybrid model combining a finite element approach and a modal decomposition method is used to investigate the interaction of Lamb modes with corrosion pits. The finite element mesh is used to describe the region surrounding the corrosion pits while the modal decomposition method permits to determine the waves reflected and transmitted by the damaged area. Simulations make easier the interpretation of some parts of the measured waveform corresponding to superposition of waves diffracted by the corroded area. Numerical results permit to extract significant information from the transmitted waveform and thus to optimize the signal processing for the detection of corrosion at an early stage. Now, we are able to detect corrosion pits down to 80-mum depth distributed randomly on a square centimeter of an aluminum plate. Moreover, thickness variations present on aircraft structures can be discriminated from a slightly corroded area. Finally, using this experimental setup, aircraft structures have been tested.

A New Omni-Directional EMAT for Ultrasonic Lamb Wave Tomography Imaging of Metallic Plate Defects

PubMed Central

Huang, Songling; Wei, Zheng; Zhao, Wei; Wang, Shen

2014-01-01

This paper proposes a new omni-directional electromagnetic acoustic transducer (EMAT) for the ultrasonic Lamb wave (ULW) tomography imaging (TI) of defects in metallic plates. The proposed EMAT is composed of a permanent magnet and a coil with a contra-flexure structure. This new EMAT coil structure is used for omni-directional ULW transmission and reception and ULW TI for the first time. The theoretical background and the working principles of this EMAT are presented and analyzed. The experimental results of its use on a 3 mm thick aluminum plate indicate that the EMAT with a contra-flexure coil (CFC) can transmit and receive a pure single A0 mode ULW with a high signal-to-noise ratio (SNR). Thus, the extraction of the projection data used for ULW TI may be performed accurately. The circumferential consistency of the projection data is only slightly influenced by the distortion of the eddy current field that is induced by the new CFC with an irregular shape. When the new EMAT array is used for ULW TI using the cross-hole method and SIRT arithmetic, a desirable imaging quality can be achieved, and the estimated size of an artificial corrosion defect agreed well with its actual value. The relation between the reconstruction resolution and the number of the new EMATs used is analyzed. More TI experiments are carried out when the aluminum plate defect is in two different locations relative to the EMAT array, for the further investigation of the performances of the new EMATs. PMID:24561398

The role of the environment in transmission of Dichelobacter nodosus between ewes and their lambs

PubMed Central

Muzafar, Mohd; Calvo-Bado, Leo A.; Green, Laura E.; Smith, Edward M.; Russell, Claire L.; Grogono-Thomas, Rose; Wellington, Elizabeth M.H.

2015-01-01

Dichelobacter nodosus (D. nodosus) is the essential causative agent of footrot in sheep. The current study investigated when D. nodosus was detectable on newborn lambs and possible routes of transmission. Specific qPCR was used to detect and quantify the load of D. nodosus in foot swabs of lambs at birth and 5–13 h post-partum, and their mothers 5–13 h post-partum; and in samples of bedding, pasture, soil and faeces. D. nodosus was not detected on the feet of newborn lambs swabbed at birth, but was detected 5–13 h after birth, once they had stood on bedding containing naturally occurring D. nodosus. Multiple genotypes identified by cloning and sequencing a marker gene, pgrA, and by multi locus variable number tandem repeat analysis (MLVA) of community DNA from swabs on individual feet indicated a mixed population of D. nodosus was present on the feet of both ewes and lambs. There was high variation in pgrA tandem repeat number (between 3 and 21 repeats), and multiple MLVA types. The overall similarity index between the populations on ewes and lambs was 0.45, indicating moderate overlap. Mother offspring pairs shared some alleles but not all, suggesting lambs were infected from sources(s) other than just their mother's feet. We hypothesise that D. nodosus is transferred to the feet of lambs via bedding containing naturally occurring populations of D. nodosus, probably as a result of transfer from the feet of the group of housed ewes. The results support the hypothesis that the environment plays a key role in the transmission of D. nodosus between ewes and lambs. PMID:25953734

16 CFR 301.8 - Use of terms “Persian Lamb,” “Broadtail Lamb,” and “Persian-broadtail Lamb” permitted.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Use of terms âPersian Lamb,â âBroadtail Lamb... Regulations § 301.8 Use of terms “Persian Lamb,” “Broadtail Lamb,” and “Persian-broadtail Lamb” permitted. (a) The term Persian Lamb may be used to describe the skin of the young lamb of the Karakul breed of sheep...

Stable isotopes to discriminate lambs fed herbage or concentrate both obtained from C(3) plants.

PubMed

Moreno-Rojas, Jose M; Vasta, Valentina; Lanza, Alfio; Luciano, Giuseppe; Ladroue, Virginie; Guillou, Claude; Priolo, Alessandro

2008-12-01

This study was aimed at determining whether isotopic ratio mass spectrometry (IRMS) enables us to discriminate between lambs fed herbage or concentrate, both obtained from C(3) plants, and those fed a concentrate obtained from C(4) plants. Thirty-four Comisana male lambs (age 45 days) were assigned to three feeding treatments. Fourteen lambs were fed vetch (Vicia sativa) ad libitum. Another fourteen lambs received a barley-based concentrate. The remaining six lambs were fed a maize-based concentrate. After 60 days of experimental treatment the animals were slaughtered and the wool, perirenal fat and muscle longissimus dorsi were sampled. The delta(13)C and delta(15)N values of the muscle, wool and feed were measured by continuous flow elemental analysis (CF-EA)-IRMS. The delta(13)C of the fat was determined likewise. The isotopic composition of the tissues reflected that of the three diets. For the lambs which were fed herbage the muscle delta(13)C values were higher (P < 0.0005) and delta(15)N values were lower (P < 0.0005) than those of the lambs receiving concentrates. The delta(15)N and delta(13)C values in the muscle and delta(13)C values in the adipose tissue allowed perfect discrimination between the lambs fed the three different diets. The regression between the delta(13)C values measured in muscle and in wool of lambs was linear (R(2) = 0.99; P < 0.0005). This result shows that delta(13)C measured in the wool can predict muscle delta(13)C distribution, suggesting that wool is a valuable matrix for meat authentication.

Influence of Nigella sativa seeds, Rosmarinus officinalis leaves and their combination on growth performance, immune response and rumen metabolism in Dorper lambs.

PubMed

Odhaib, Kifah Jumaah; Adeyemi, Kazeem Dauda; Ahmed, Muideen Adewale; Jahromi, Muhammad Faseleh; Jusoh, Shokri; Samsudin, Anjas Asmara; Alimon, Abdul Razak; Yaakub, Halimatun; Sazili, Awis Qurni

2018-06-01

The objective of this study was to determine the effects of dietary supplementation of Nigella sativa L. seeds, Rosmarinus officinalis L. leaves and their combination on rumen metabolism, nutrient intake and digestibility, growth performance, immune response and blood metabolites in Dorper lambs. Twenty-four entire male Dorper lambs (18.68 ± 0.6 kg, 4-5 months old) were randomly assigned to a concentrate mixture containing on a dry matter basis either, no supplement (control, T1), 1% R. officinalis leaves (T2), 1% N. sativa seeds (T3) or 1% R. officinalis leaves +1% N. sativa seeds (T4). The lambs had ad libitum access to urea-treated rice straw (UTRS) and were raised for 90 days. Supplemented lambs had greater (P < 0.05) intake of DM and UTRS than the control lambs. The T4 lambs had lower (P < 0.05) nutrient digestibility than those fed other treatments. Total and daily weight gain was greater (P < 0.05) in T2 lambs than those fed other diets. The T3 and T4 lambs had greater (P < 0.05) ruminal pH than the T1 and T2 lambs. Supplemented lambs had lower (P < 0.05) ruminal total volatile fatty acids, acetate, propionate, NH 3 -N and C18:0 than the control lambs. The T4 lambs had lower (P < 0.05) population of Fibrobacter succinogenes, Ruminococcus albus, methanogens and total protozoa compared with those fed other diets. Supplemented lambs had lower (P < 0.05) neutrophils, basophils and serum urea and greater (P < 0.05) serum IgA and IgG compared with the control lambs. The current results emphasised the variation in the efficacy of medicinal plants in ruminant nutrition.

Rumen Bacteria Communities and Performances of Fattening Lambs with a Lower or Greater Subacute Ruminal Acidosis Risk

PubMed Central

Li, Fei; Wang, Zhilan; Dong, Chunxiao; Li, Fadi; Wang, Weimin; Yuan, Zehu; Mo, Futao; Weng, Xiuxiu

2017-01-01

Several ruminal cellulolytic bacteria species are sensitive to pH and could therefore be used as biomarkers to determine the risk of sub-acute ruminal acidosis (SARA) in finishing lambs. This study compared a 2–4 h post feeding ruminal pH measurement to abundances of the ruminal pH-sensitive bacteria to evaluate the risk of SARA in a herd of 120 finishing lambs. The lambs were reared in individual units for 50 days. Ruminal fluid was collected by use of an orogastric tube on day 51 2-4 h after feeding. Although the lambs were fed an identical diet, they responded differently in the abundances of four ruminal pH sensitive cellulolytic bacteria (Ruminococcus albus, Ruminococcus flavefaciens and Fibrobacter succinogenes and Butyrivibrio fibrisolvens). Lambs with the most or the least cellulolytic bacteria were then classified as either lower SARA risk (LSR, n = 10) or higher SARA risk group (HSR, n = 10), respectively. Data showed that the ruminal pH and VFA profiles were uncorrelated with the number of cellulolytic bacteria (P > 0.050). Lambs with the HSR showed lower ruminal pH (P = 0.013) and acetate to propionate ratio (P = 0.018), higher concentrations of lactate (P = 0.035) and proportion of propionate (P = 0.033) compared to those with the LSR. The DMI and ADG did not differ in LSR and HSR lambs (P > 0.050). A diversity analysis revealed significantly lower diversity in HSR lambs than in LSR (Simpson index, P = 0.004). The relative abundances of the phyla Bacteroidetes, Fibrobacteres, Verruomicrobia, and Proteobacteria were higher in LSR lambs than in HSR (P < 0.050). The abundances of several phyla including Firmicutes, Tenericutes and Actinobacteria were higher in the HSR than in the LSR group (P < 0.050). The bacterial communities of the LSR and HSR clustered separately in rumen based on the Unifrac distances, indicating distinct bacteria communities at OTU level between the LSR and HSR lambs. Overall, there was no correlation between 2 and 4 h post

Peculiarities of energy trapping of the UHF elastic waves in diamond-based piezoelectric layered structure. I. Waveguide criterion.

PubMed

Kvashnin, G M; Sorokin, B P; Novoselov, A S

2018-03-01

Finite Element Modeling of the peculiarities of the trapping energy phenomenon in application to the piezoelectric layered structure (PLS) "Al/(0 0 1) AlN/Mo/(1 0 0) diamond" has been fulfilled. The resonant properties of longitudinal bulk acoustic waves (BAW) as well as frequency dependence of impedance within the 1 - 6 GHz band have been studied. The investigation of distribution of elastic energy flow and elastic displacements in a PLS cross-section allowed us to obtain an important information on energy trapping (ET) in PLS. Experimentally and as a result of modeling, it has been found that Q minimums are observed in PLS at quarter-wave resonance in the thin-film piezoelectric transducer (TFPT). Maximal Q value was observed at half-wave resonance in TFPT. It has been established that the ET-effect depends considerably on the mutual location of the n-th overtone's antiresonant frequency f a , n and cut-off frequencies of substrate f s , n-k- 1 and f s , n-k where f s , n-k- 1 s , n-k , and k=0, 1,2,… is the number of half-length waves to be stowed on the thickness of TFPT. The total violation of the ET-effect will be arisen at the condition f >f s , n-k , when the BAW energy excites the symmetrical or antisymmetrical Lamb waves. Copyright © 2017. Published by Elsevier B.V.

Effect of pressurization on helical guided wave energy velocity in fluid-filled pipes.

PubMed

Dubuc, Brennan; Ebrahimkhanlou, Arvin; Salamone, Salvatore

2017-03-01

The effect of pressurization stresses on helical guided waves in a thin-walled fluid-filled pipe is studied by modeling leaky Lamb waves in a stressed plate bordered by fluid. Fluid pressurization produces hoop and longitudinal stresses in a thin-walled pipe, which corresponds to biaxial in-plane stress in a plate waveguide model. The effect of stress on guided wave propagation is accounted for through nonlinear elasticity and finite deformation theory. Emphasis is placed on the stress dependence of the energy velocity of the guided wave modes. For this purpose, an expression for the energy velocity of leaky Lamb waves in a stressed plate is derived. Theoretical results are presented for the mode, frequency, and directional dependent variations in energy velocity with respect to stress. An experimental setup is designed for measuring variations in helical wave energy velocity in a thin-walled water-filled steel pipe at different levels of pressure. Good agreement is achieved between the experimental variations in energy velocity for the helical guided waves and the theoretical leaky Lamb wave solutions. Copyright © 2016 Elsevier B.V. All rights reserved.

Fattening ability and carcass value of Dhamari and Tehami ram lambs, F₁ crossbreds of Dhamari × Tehami in Yemen.

PubMed

Al Khewani, Talal; Momani Shaker, Mohamed; Al-Olofi, Samer

2014-12-01

A fattening experiment was carried out to analyze and evaluate the effect of ram lamb genotype on the growth, feed conversion (FC), and carcass value of Dhamari ram lambs, F1 crossbreds of Dhamari × Tehami (F1 DhT), and Tehami ram lambs. Genotype of the ram lambs including the experiment (n = 30) had high significant effect on total weight gain (TWG), average daily gain (ADG), and FC (P < 0.01-0.001). Genotype of the lamb had significant effect on hot and cold dressing percentage (P < 0.001). Also, genotype of the lamb had significant effect on the highest leg percentage (P < 0.001). Furthermore, genotype of the ram lambs had significant effect on musculus longissimus dorsi (MLD) area (P < 0.001). Genotype of the ram lamb had significant effect on TWG, ADG, and FC (P < 0.001). The results of moisture percentage, crude protein percentage, and ash percentage of muscle samples were significantly influenced by ram lamb's genotype (P < 0.001). Fasting live weight and other carcass measurements (hot carcass weight, leg weight, loin weight, shoulder weight, first quality cuts weight) have a positive and highest correlations (P < 0.001). The positive and the highest correlations were found between fasting live weight and hot carcass weight, first quality parts weight. In addition, the positive and the highest correlations were found between hot carcass weight and first quality cuts weight. In general, the results of this study documented that F1 DhT was better than Tehami ram lambs in ADG, TWG, and FC. Additionally, the results show that the feed conversion was in F1 DhT crossbreds ram lambs better than pure Dhamari and Tehami ram lambs, mainly in the carcass indicators.

Effect of creep-fed supplement on the susceptibility of pasture-grazed suckling lambs to gastrointestinal helminths.

PubMed

de Melo, Gleice Kelli Ayardes; Ítavo, Camila Celeste Brandão Ferreira; Monteiro, Kedma Leonora Silva; da Silva, Jonilson Araújo; da Silva, Pâmila Carolini Gonçalves; Ítavo, Luís Carlos Vinhas; Borges, Dyego Gonçalves Lino; de Almeida Borges, Fernando

2017-05-30

This study evaluated the effect of creep feeding a protein supplement on the susceptibility of suckling lambs to infection with gastrointestinal helminths. Male and female lambs were grazed on Brachiaria spp. pastures next to their mothers. Animals were allocated to one of two treatments: creep feeding (261g/d) and control (no supplementation). The trial period was the suckling of lambs during two years of study: May-October 2013 and March-July 2014. Supplementary creep feeding of lambs improved animal performance (P<0.05). Creep-fed lambs reached 18kg body weight in 64 d, but unsupplemented lambs required 77 d to reach the same weight. Lambs were susceptible to helminth infection during lactation; lambs in both treatments had high fecal egg counts (FECs), with means >1000 eggs per gram, as early as 45days of age, when the daily grazing time per animal increased. Creep feeding reduced the FECs of suckling lambs >60days of age in infections dominated by Haemonchus contortus. Totals of 20 and 48 anthelmintic treatments were administered to the supplemented and unsupplemented animals, respectively. The effect of this variable, however, was significant (P<0.05) only after 60days, when nine and 28 treatments had been administered to the supplemented and unsupplemented lambs, respectively. The number of strongyloid larvae recovered from the paddock did not differ significantly (P >0.05) between the two treatments, indicating similar challenges by infective larvae to both groups. The supplementation of lambs by creep feeding can thus be a strategy for the sustainable control of helminth infection, because it reduces the dependence on anthelmintic treatment. Copyright © 2017. Published by Elsevier B.V.

Mineral composition of lamb carcasses from the United States and New Zealand.

PubMed

Lin, K C; Cross, H R; Johnson, H K; Breidenstein, B C; Randecker, V; Field, R A

1988-01-01

The mineral composition-iron (Fe), zinc (Zn), copper (Cu), calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), fluoride (F), and phosphorus (P) (New Zealand lamb only)-of lean tissue from lamb retail cuts was studied. Twenty-four US lamb carcasses of different ages (5 to 11 months), geographical regions (Texas, Colorado and Montana) and USDA quality grades (Prime and Choice) and 27 New Zealand lamb carcasses from three weight groups (11 to 12·5 kg, 13 to 14·5 kg, and 16·5 to 18 kg), age rangining from 7 to 8 months, were selected for use in this study. Mineral concentrations were influenced more by retail cut and age than by quality grade or weigth group. Foreshank and shoulder cuts from both the US and New Zealand group consistently had the highest (P < 0·05) Zn content among the cuts. The K content of the muscle in US lambs increased as age increased, while the level of Ca and Zn in New Zealand lambs decreased as carcass weight increased. Except for Ca, the mineral concentrations of the lean tissue from US lambs were higher than the New Zealand lambs, although the differences were not always significant. US lambs had approximately 20%, 30% and 37% more Fe, Zn and Mg, respectively, but 27% less Ca than lean tissue from the New Zealand lambs. Copyright © 1989. Published by Elsevier Ltd.

On-line crack prognosis in attachment lug using Lamb wave-deterministic resampling particle filter-based method

NASA Astrophysics Data System (ADS)

Yuan, Shenfang; Chen, Jian; Yang, Weibo; Qiu, Lei

2017-08-01

Fatigue crack growth prognosis is important for prolonging service time, improving safety, and reducing maintenance cost in many safety-critical systems, such as in aircraft, wind turbines, bridges, and nuclear plants. Combining fatigue crack growth models with the particle filter (PF) method has proved promising to deal with the uncertainties during fatigue crack growth and reach a more accurate prognosis. However, research on prognosis methods integrating on-line crack monitoring with the PF method is still lacking, as well as experimental verifications. Besides, the PF methods adopted so far are almost all sequential importance resampling-based PFs, which usually encounter sample impoverishment problems, and hence performs poorly. To solve these problems, in this paper, the piezoelectric transducers (PZTs)-based active Lamb wave method is adopted for on-line crack monitoring. The deterministic resampling PF (DRPF) is proposed to be used in fatigue crack growth prognosis, which can overcome the sample impoverishment problem. The proposed method is verified through fatigue tests of attachment lugs, which are a kind of important joint component in aerospace systems.

Body Composition of Lambs and Rams Fed Complete Feed

NASA Astrophysics Data System (ADS)

Rahmawati, F.; Rianto, E.

2018-02-01

This study was aimed to investigate the proportion of body water, protein and fat of lambs and rams. The material used in this study were 6 lambs (weighed of 15.92 kg), and 6 rams (weighed 23.31 kg). The sheep were fed a complete feed. In weeks 1, 5 and 9, the body composition (water, protein and body fat) was measured using the “urea space” method. The results showed that the proportion of water, protein and fat in the body of lambs and sheep differed significantly (P <0.01). The proportion of lambs’ body water in weeks 1, 5 and 9 were 58.71, 58.43 and 58.43%, respectively; while thoset of the rams were 58.40, 58.14% and 58.14%, respectively. The proportion of body protein of lambs in weeks 1, 5 and 9 were 11.84, 11.94 and 11.99%, respectively; while those of rams were 13.01; 13.01 and 13.03%, respectively. The proportion of body fat of lambs in weeks 1, 5 and 9 were 20.51, 20.87 and 20.87%, respectively; while those of rams were 20.9, 21.26 and 21.25%, respectively. Body water of lambs and rams week decreased from week 1 to 9. On the other hand, the proportion of body protein and fat increased. It is concluded that the proportion of body water was higher while the proportions of body protein and fat were lower in lambs as compared with those in rams.

Observations on the alimentary tract of gnotobiotic lambs.

PubMed

Lysons, R J; Alexander, T J; Wellstead, P D; Jennings, I W

1976-01-01

Seventeen gnotobiotic lambs were reared up to 21 weeks of age on cows' milk followed by sterile solid diets similar to diets fed to conventional lambs. Seven were inoculated with limited defined populations of rumen bacteria, seven were left uninoculated and three were dosed with rumen contents from conventional sheep ('conventionalised'). Seven naturally-born lambs were reared for purposes of comparison. As with other species of gnotobiotic animals, both the inoculated and the uninoculated gnotobiotic lambs had small, poorly developed lymph nodes, soft colon contents and thin intestinal walls. Unlike other species the caeca of gnotobiotic lambs were of normal size. The overall size of the reticulo-rumen including contents relative to body weight was similar in gnotobiotic and conventional lambs. However, macroscopically, the musculature of the rumen seemed to be poorly developed and histological studies showed hypoplasia of the muscle tissue of both the rumen and reticulum. Rumination was noted only infrequently in gnotobiotic lambs. The epithelium of the rumen and reticulum of the uninoculated gnotobiotic lambs was similar to that of neonatal lambs, but there was normal development of papillae in gnotobiotic lambs inoculated with limited defined populations of rumen bacteria and in conventionalised lambs. Degenerative changes were observed histologically in some of the organs of gnotobiotic lambs which were consistent with nutritional deficiencies.

The effect of cyclical and severe heat stress on growth performance and metabolism in Afshari lambs.

PubMed

Mahjoubi, E; Yazdi, M Hossein; Aghaziarati, N; Noori, G R; Afsarian, O; Baumgard, L H

2015-04-01

The extent to which reduced feed intake contributes to decreased growth during heat stress (HS) in the ovine model is not clear. To evaluate the impact of decreased DMI on performance, we conducted an experiment on growing lambs experiencing a cyclical but extensive heat load. Sixteen intact male Afshari lambs (40.1 ± 1.9 kg) were used in a completely randomized design in 2 periods. In period 1, all 16 lambs were housed in thermal neutral (TN) conditions (22.2 ± 3.1°C and a temperature-humidity index [THI] of 67.9 ± 3.2) and fed at libitum for 8 d. In period 2 (P2), which lasted 9 d, 8 lambs were subjected to a cyclical HS condition (33.0 to 45.0°C and a THI of more than 80 at least for 24 h/d and more than 90 for 8 h/d). The other 8 lambs were maintained in TN conditions but pair-fed (pair-fed thermal neutral [PFTN]) to the HS lambs. During each period, DMI and water intake were measured daily. Respiration rate, rectal temperature, and skin temperature at the shoulder, rump, and front and rear leg were recorded at 0700 and 1400 h daily. Dry matte intake declined (17.5%; P < 0.01) in HS lambs and, by design, the temporal pattern and magnitude of reduced feed intake was similar in the PFTN controls. Water intake increased (19%; P < 0.05) during P2 in HS but not in the PFTN controls. Heat stress increased the 0700 and 1400 h skin temperature at the shoulder (5 and 9.2%), rump (6.2 and 10.3%), rear (6 and 9.2%), and front leg (6.5 and 9.8%) and respiratory rates (84 and 163% [P < 0.01]at 0700 and 1400 h, respectfully), but only the 1400 h rectal temperature was increased (P < 0.01; 0.65°C) in HS lambs. Neither environment nor period affected blood urea nitrogen and glucose concentrations. However, circulating NEFA and insulin were increased and declined (P < 0.01) in PFTN lambs, respectively, but neither variable was altered in the HS lambs. Growth was reduced in P2 for lambs in both treatments, but despite being on a similar reduced plane of nutrition, the HS

The influence of ovarian factors on the somatostatin-growth hormone system during the postnatal growth and sexual development in lambs.

PubMed

Wańkowska, Marta; Polkowska, Jolanta; Misztal, Tomasz; Romanowicz, Katarzyna

2012-07-01

The aim of the study was to elucidate the effects of ovarian hormones on somatostatin in the hypothalamic neurons and growth hormone (GH) secretion during the postnatal growth and development of sheep. The study was performed on 9-week-old (infantile) lambs that were ovary-intact (OVI) or ovariectomized (OVX) at 39 days of age, and on 16-week-old (juvenile) lambs that were OVI or OVX at 88 days of age. Hormones in neurons and somatotropic cells were assayed with immunohistochemistry and radioimmunoassay. Following ovariectomy, immunoreactive somatostatin was more abundant (p<0.05) in the hypothalamus of infantile lambs, whereas in juvenile lambs it was more abundant (p<0.05) in the periventricular nucleus but reduced (p<0.01) in the median eminence. In contrast to somatostatin in the hypothalamus, the content of immunoreactive GH in the hypophysis was less in OVX infantile lambs, but greater in OVX juvenile lambs (p<0.05). Basal blood serum concentrations of GH were greater (p<0.05) in OVX infantile lambs, whereas in OVX juvenile lambs, mean and basal concentrations of GH and amplitude of GH pulses were less than in OVI lambs (p<0.05). The postnatal increase in body weight was greatest in middle-late infancy (p<0.01). The body weight did not differ (p>0.05) between OVI and OVX lambs. In conclusion, ovarian factors may inhibit the GH secretion in infantile lambs but enhance the GH secretion in juvenile lambs. Transition to puberty, as related to the growth rate, appears to be due mainly to change in gonadal influence on the somatostatin neurosecretion. A stimulation of somatostatin output in the median eminence by gonadal factors in infancy is followed by a stimulation of somatostatin accumulation after infancy. Thus, ovarian factors modulate mechanisms within the somatotropic system of lambs to synchronize the somatic growth with sexual development. Copyright © 2012 Elsevier B.V. All rights reserved.

Is the Lamb shift chemically significant?

NASA Technical Reports Server (NTRS)

Dyall, Kenneth G.; Bauschlicher, Charles W., Jr.; Schwenke, David W.; Pyykko, Pekka; Arnold, James (Technical Monitor)

2001-01-01

The contribution of the Lamb shift to the atomization energies of some prototype molecules, BF3, AlF3, and GaF3, is estimated by a perturbation procedure. It is found to be in the range of 3-5% of the one-electron scalar relativistic contribution to the atomization energy. The maximum absolute value is 0.2 kcal/mol for GaF3. These sample calculations indicate that the Lamb shift is probably small enough to be neglected for energetics of molecules containing light atoms if the target accuracy is 1 kcal/mol, but for higher accuracy calculations and for molecules containing heavy elements it must be considered.

Ground Juniperus pinchotii and urea in supplements fed to Rambouillet ewe lambs Part 2: Ewe lamb rumen microbial communities.

PubMed

Ishaq, S L; Yeoman, C J; Whitney, T R

2017-10-01

This study evaluated effects of ground redberry juniper () and urea in dried distillers grains with solubles-based supplements fed to Rambouillet ewe lambs ( = 48) on rumen physiological parameters and bacterial diversity. In a randomized study (40 d), individually-penned lambs were fed ground sorghum-sudangrass hay and of 1 of 8 supplements (6 lambs/treatment; 533 g/d; as-fed basis) in a 4 × 2 factorial design with 4 concentrations of ground juniper (15%, 30%, 45%, or 60% of DM) and 2 levels of urea (1% or 3% of DM). Increasing juniper resulted in minor changes in microbial β-diversity (PERMANOVA, pseudo F = 1.33, = 0.04); however, concentrations of urea did not show detectable broad-scale differences at phylum, family, or genus levels according to ANOSIM ( > 0.05), AMOVA ( > 0.10), and PERMANOVA ( > 0.05). Linear discriminant analysis indicated some genera were specific to certain dietary treatments ( < 0.05), though none of these genera were present in high abundance; high concentrations of juniper were associated with and , low concentrations of urea were associated with , and high concentrations of urea were associated with and . were decreased by juniper and urea. , , and increased with juniper and were positively correlated (Spearman's, < 0.05) with each other but not to rumen factors, suggesting a symbiotic interaction. Overall, there was not a juniper × urea interaction for total VFA, VFA by concentration or percent total, pH, or ammonia ( 0.29). When considering only percent inclusion of juniper, ruminal pH and proportion of acetic acid linearly increased ( < 0.001) and percentage of butyric acid linearly decreased ( = 0.009). Lamb ADG and G:F were positively correlated with (Spearman's, < 0.05) and negatively correlated with Synergistaceae, the BS5 group, and Lentisphaerae. Firmicutes were negatively correlated with serum urea nitrogen, ammonia, total VFA, total acetate, and total propionate. Overall, modest differences in bacterial diversity among

The restriction of grazing duration does not compromise lamb meat colour and oxidative stability.

PubMed

Luciano, G; Biondi, L; Pagano, R I; Scerra, M; Vasta, V; López-Andrés, P; Valenti, B; Lanza, M; Priolo, A; Avondo, M

2012-09-01

Over 72 days, 33 lambs were fed: concentrates in stall (S), grass at pasture for 8 hours (8 h), or grass at pasture for 4 hours in the afternoon (4h-PM). The 4h-PM treatment did not affect the carcass yield compared to the 8h treatment. Meat colour development after blooming was unaffected by the treatments. The 4 h-PM treatment increased the proportion of polyunsaturated fatty acids (PUFA; P<0.0005) and of the highly peroxidizable fatty acids (HP-PUFA; P<0.001) in meat compared to the 8h treatment. The S treatment increased lipid oxidation (higher TBARS values) and impaired colour stability (higher H* values) of meat over storage compared to the 8h and 4 h-PM treatments (P<0.0005 and P=0.003, respectively). No difference in meat oxidative stability was found between the 8h and the 4h-PM treatments. In conclusion, growing lambs can tolerate a restriction of grazing duration without detrimental effects on performances and meat oxidative stability. Copyright © 2012. Published by Elsevier Ltd.

Using guided ultrasonic wave inspection to quantify the length of delaminations in composite laminates

NASA Astrophysics Data System (ADS)

Feng, Bo; Ribeiro, Artur Lopes; Ramos, Helena Geirinhas

2018-04-01

This paper presents a study of the characteristics of Lamb wave (S0 mode) testing signals in carbon fiber composite laminates containing delaminations. The study was implemented by using commercial finite element simulation software - ANSYS. The delamination signal is proven to be the superposition of the two waves travelling from upper and lower sub-laminates. Dispersion curves for the two sub-laminates were calculated to show the difference between phase velocities of the waves in the sub-laminates. Two models are specifically designed to get the phase difference between the waves that travel in each of the two sub-laminates. From the simulation results, it was found that the phase difference increases with the delamination length. Furthermore, the amplitude of delamination signal decreases first, then it starts to increase after reaching the minimum value. The minimum is reached when the waves from the two sub-laminates are 180° out of phase.

Adult survival, apparent lamb survival, and body condition of desert bighorn sheep in relation to habitat and precipitation on the Kofa National Wildlife Refuge, Arizona

USGS Publications Warehouse

Overstreet, Matthew; Caldwell, Colleen A.; Cain, James W.

2014-01-01

The decline of desert bighorn sheep on the Kofa National Wildlife Refuge (KNWR) beginning in 2003 stimulated efforts to determine the factors limiting survival and recruitment. We 1) determined pregnancy rates, body fat, and estimated survival rates of adults and lambs; 2) investigated the relationship between precipitation, forage conditions, previous year’s reproductive success, and adult body condition; 3) assessed the relative influence of body condition of adult females, precipitation, and forage characteristics on apparent survival of lambs; and 4) determined the prevalence of disease. To assess the influence of potential limiting factors on female desert bighorn sheep on the KNWR, we modeled percent body fat of adult females as a function of previous year’s reproductive effort, age class, and forage conditions (i.e., seasonal NDVI and seasonal precipitation). In addition, we assessed the relative influence of the body condition of adult females, precipitation, and forage conditions (NDVI) on length of time a lamb was observed at heel.Adult female survival was high in both 2009 (0.90 [SE = 0.05]) and 2010 (0.96 [SE = 0.03]). Apparent lamb survival to 6 months of age was 0.23 (SE = 0.05) during 2009-2010 and 0.21 (SE = 0.05) during 2010-2011 lambing seasons. Mean body fat for adult females was 12.03% (SE = 0.479) in 2009-2010 and 11.11% (SE= 0.486) in 2010-2011 and was not significantly different between years. Pregnancy rate was 100% in 2009 and 97.5% in 2010.Models containing the previous year’s reproductive effort, spring NDVI and previous year’s reproductive effort and spring precipitation best approximated data on percent body fat in adult females in 2009-2010. In 2010-2011, the two highest-ranking models included the previous year’s reproductive effort and winter NDVI and previous year’s reproductive effort, and winter and spring NDVI. None of the models assessing the influence of maternal body fat, precipitation, or forage conditions were

The development of the pupillary light reflex and menace response in neonatal lambs and kids.

PubMed

Raoofi, Afshin; Mirfakhraie, Pejman; Yourdkhani, Sorush

2011-03-01

The aim of this study was to investigate the development of the pupillary light reflex and menace response in neonatal lambs and goat kids. Thirty lambs and 33 kids were assessed daily from birth until the pupillary light reflex and menace response had become established. All animals had a controlled pupillary light reflex within 20 h of birth. Lambs and kids had developed menace responses by 8 ± 3 and 14 ± 2 days, respectively. The Mann-Whitney test revealed a significant difference (P < 0.001) in the ages at which lambs and kids developed a menace response. Male kids developed this response significantly (P = 0.006) later than females. There was no sex difference in the menace response in the lambs. Overall, the findings indicated that lambs develop a menace response earlier than kids, and female kids develop this response more rapidly than their male counterparts. Copyright © 2010 Elsevier Ltd. All rights reserved.

Introduction of meat sheep breeds in extensive systems of Patagonia: lamb growth and survival.

PubMed

Alvarez, M; Rodríguez Iglesias, R M; García Vinent, J; Giorgetti, H; Baselga, M

2010-04-01

Genotype effects on lamb growth, survival, and commercial finishing were estimated in a 5-yr study aimed at assessing potential benefits from introducing meat breeds into extensive sheep systems of northeastern Patagonia. Five ram [Corriedale: CO; Border Leicester: BL; Ile de France: IF; Texel: TX; and synthetic CRIII (25% Merino, 37.5% IF, 37.5% TX)] and 5 dam (CO; synthetic CRIII; BLCO: BL x CO; IFCO: IF x CO; and TXCO: TX x CO) genotypes were represented in the study. Data were collected from 1,426 born and 1,258 weaned lambs of 9 resulting genotypes (CO x CO, BL x CO, IF x CO, TX x CO, CRIII x CO, CRIII x BLCO, CRIII x IFCO, CRIII x TXCO, and CRIII x CRIII). Birth weight was recorded on all lambs; subsequently, BW and BCS (scale 1 to 5) were recorded at regular intervals until weaning. Body weights were adjusted to 60 and 90 (weaning) d of age, and ADG were calculated from the adjusted BW for the periods 0 to 60 d and 60 to 90 d; BCS was adjusted to 90 d. Survival to weaning and percentage of lambs reaching commercial finishing (BW >or= 23 kg and BCS >or= 2.5 points) were also recorded. Significant (P < 0.05) genotype x litter size interactions were detected for birth weight and ADG 60 to 90 d. With the exception of CRIII x CO, crossbred and synthetic genotypes presented greater (P < 0.05) ADG 0 to 60 d and BW at 60 and 90 d than CO x CO lambs. Second cross lambs reared as singles presented greater ADG 60 to 90 d (P < 0.05) than BL x CO, TX x CO, and CRIII x CO, but less (P < 0.05) ADG 60 to 90 d, and no differences were observed for twins. The IF x CO, CRIII x BLCO, CRIII x IFCO, and CRIII x CRIII genotypes showed greater BCS at 90 d (P < 0.05) than CO x CO. The probability of greater commercial finishing for crossbred and synthetic genotypes relative to CO x CO was at least 79%. Probabilities of greater survival to weaning in CO x CO and CRIII x BLCO lambs relative to IF x CO, TX x CO, CRIII x CO, and CRIII x CRIII lambs were greater than 81%. Results

Evaluation of Rambouillet, Polypay, and Romanov-White Dorper × Rambouillet ewes mated to terminal sires in an extensive rangeland production system: Lamb production.

PubMed

Notter, D R; Mousel, M R; Lewis, G S; Leymaster, K A; Taylor, J B

2017-09-01

Ewe productivity (i.e., total number or weight of lambs weaned per breeding ewe) is a key indicator of lamb production efficiency. This study compared various measures of ewe productivity and ewe and lamb performance among ewes of 3 breed types mated to rams of 4 terminal-sire breed types in an extensive rangeland production system. Purebred Rambouillet ( = 212), purebred Polypay ( = 236), and crossbred Romanov-White Dorper × Rambouillet (RW-RA; = 231) ewes were produced from locally adapted Polypay and Rambouillet ewes and then annually mated to Columbia, Suffolk, Columbia × Suffolk, or Suffolk × Columbia sires for up to 4 yr, beginning at 1 yr of age. The cumulative number and weight of lambs weaned through 4 yr were greater for RW-RA (5.9 lambs and 153 kg, respectively) and Polypay ewes (4.9 lambs and 123 kg, respectively) than for Rambouillet ewes (2.9 lambs and 99 kg, respectively) and also were greater for RW-RA ewes than for Polypay ewes (all < 0.001). Greater productivity of RW-RA and Polypay ewes, compared with Rambouillet ewes, was driven by greater lambing rates (ewes lambing per ewe exposed) as ewe lambs (87 and 77 vs. 31%, respectively; < 0.001) and greater ( < 0.001) litter sizes as ewe lambs (1.3, 1.3, and 1.0, respectively) and adult ewes (2.1, 2.0, and 1.6, respectively). The RW-RA ewes also had greater longevity ( < 0.01) and cumulative lambing rates ( < 0.001) than Polypay and Rambouillet ewes. Lamb BW at birth and weaning in adult ewes favored less-prolific Rambouillet ewes ( < 0.001), but after adjustment for type of birth and rearing and weaning age, differences in weaning BW among ewe breed types were small and not significant ( = 0.08). Effects of sire breed type on measures of cumulative ewe productivity were not significant ( > 0.74), but Suffolk-sired lambs had the heaviest adjusted birth weights ( = 0.01) and Columbia-sired lambs tended to have the lightest adjusted weaning weights ( = 0.12). Combined effects of heterosis and additive

Wave Gradiometry for the Central U.S

NASA Astrophysics Data System (ADS)

liu, Y.; Holt, W. E.

2013-12-01

Wave gradiometry is a new technique utilizing the shape of seismic wave fields captured by USArray transportable stations to determine fundamental wave propagation characteristics. The horizontal and vertical wave displacements, spatial gradients and time derivatives of displacement are linearly linked by two coefficients which can be used to infer wave slowness, back azimuth, radiation pattern and geometrical spreading. The reducing velocity method from Langston [2007] is applied to pre-process our data. Spatial gradients of the shifted displacement fields are estimated using bi-cubic splines [Beavan and Haines, 2001]. Using singular value decomposition, the spatial gradients are then inverted to iteratively solve for wave parameters mentioned above. Numerical experiments with synthetic data sets provided by Princeton University's Neal Real Time Global Seismicity Portal are conducted to test the algorithm stability and evaluate errors. Our results based on real records in the central U.S. show that, the average Rayleigh wave phase velocity ranges from 3.8 to 4.2 km/s for periods from 60-125s, and 3.6 to 4.0 km/s for periods from 25-60s, which is consistent with earth model. Geometrical spreading and radiation pattern show similar features between different frequency bands. Azimuth variations are partially correlated with phase velocity change. Finally, we calculated waveform amplitude and spatial gradient uncertainties to determine formal errors in the estimated wave parameters. Further effort will be put into calculating shear wave velocity structure with respect to depth in the studied area. The wave gradiometry method is now being employed across the USArray using real observations and results obtained to date are for stations in eastern portion of the U.S. Rayleigh wave phase velocity derived from Aug, 20th, 2011 Vanuatu earthquake for periods from 100 - 125 s.

P-S & S-P Elastic Wave Conversions from Linear Arrays of Oriented Microcracks

NASA Astrophysics Data System (ADS)

Jiang, L.; Modiriasari, A.; Bobet, A.; Pyrak-Nolte, L. J.

2017-12-01

Natural and induced processes can produce oriented mechanical discontinuities such as en echelon cracks, fractures and faults. Previous research has shown that compressional to shear (P-S) wave conversions occur at normal incidence to a fracture because of cross-coupling fracture compliances (Nakagawa et al., 2000). Here, experiments and computer simulation are presented to demonstrate the link among cross-coupling stiffness, microcrack orientation and energy partitioning among P, S, and P-S/S-P waves. A FormLabs 2 3D printer was used to fabricate 7 samples (50 mm x 50 mm x 100 mm) with linear arrays of microcracks oriented at 0, 15, 30, 45, 60, 75, and 900 with a print resolution of 0.025 mm. The microcracks were elliptical in cross-sections (2 mm long by 1 mm wide), through the 50 mm thickness of sample, and spaced 3 mm (center-to-center for adjacent cracks). A 25 mm length of each sample contained no microcracks to act as a reference material. Broadband transducers (0.2-1.5 MHz) were used to transmit and receive P and polarized S wave signals that were propagated at normal incidence to the linear array of microcracks. P-wave amplitude increased, while S-wave amplitude remained relatively constant, as the microcrack orientation increased from 0o to 90o. At normal incidence, P-S and S-P wave conversions emerged and increased in amplitude as the crack inclination increased from 00 to 450. From 450 to 900, the amplitude of these converted modes decreased. Between negative and positive crack angles, the P-to-S and S-to-P waves were 1800 phase reversed. The observed energy partitioning matched the computed compliances obtained from numerical simulations with ABAQUS. The cross-coupling compliance for cracks inclined at 450 was found to be the smallest magnitude. 3D printing enabled the study of microstructural effects on macro-scale wave measurements. Information on the orientation of microcracks or even en echelon fractures and faults is contained in P-S conversions

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Code of Federal Regulations, 2011 CFR

2011-01-01

... following information on total carlot-based lamb carcass transactions not later than 3 p.m. central time in... per hundredweight on an F.O.B. plant basis; (2) The quantity for each lot of each transaction, quoted... price for each lot of each boxed lamb cut sale, quoted in dollars per hundredweight on a F.O.B. plant...

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Code of Federal Regulations, 2012 CFR

2012-01-01

... following information on total carlot-based lamb carcass transactions not later than 3 p.m. central time in... per hundredweight on an F.O.B. plant basis; (2) The quantity for each lot of each transaction, quoted... price for each lot of each boxed lamb cut sale, quoted in dollars per hundredweight on a F.O.B. plant...

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Code of Federal Regulations, 2014 CFR

2014-01-01

... following information on total carlot-based lamb carcass transactions not later than 3 p.m. central time in... per hundredweight on an F.O.B. plant basis; (2) The quantity for each lot of each transaction, quoted... price for each lot of each boxed lamb cut sale, quoted in dollars per hundredweight on a F.O.B. plant...

Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: VIII. Quality measures of lamb longissimus dorsi.

PubMed

Mousel, M R; Notter, D R; Leeds, T D; Zerby, H N; Moeller, S J; Taylor, J B; Lewis, G S

2014-07-01

Quality measures of lamb longissimus dorsi were evaluated in 514 crossbred wether lambs to assess sire breed differences. Wethers were produced over 3 yr from single-sire matings of 22 Columbia, 22 U.S. Meat Animal Research Center (USMARC)-Composite (Composite), 21 Suffolk, and 17 Texel rams to adult Rambouillet ewes. Lambs were reared to weaning in an extensive western rangeland production system and finished in a feedlot on a high-energy finishing diet. One of three harvest groups were randomly assigned to each lamb, and lambs were transported to The Ohio State University abattoir when the mean BW of wethers remaining in the feedlot reached 54.4, 61.2, or 68.0 kg. After harvest, subjective lean quality scores were assigned and LM pH (immediately after and 24 h after harvest), color (quantified as Minolta L*, a*, and b*), intramuscular fat (IMF), cooking loss percentage, and Warner-Bratzler shear force (WBSF) were determined. Statistical models included fixed effects of sire breed, year of birth, and harvest group and random effects of sire (nested within sire breed and year) and maternal grandsire. Year and harvest group were significant (P < 0.04) for all traits, except harvest group was not for WBSF and lean quality (P > 0.28). At comparable numbers of days on feed, Texel-sired wethers had the greatest (more desirable; P < 0.01) subjective lean quality scores while Composite- and Suffolk-sired lambs were intermediate and Columbia-sired lambs had the lowest (less desirable). Minolta L* values were greater (P < 0.02) for Texel- than Columbia-sired lambs, although this difference is not visually discernible by humans. No significant (P > 0.05) sire breed effects were detected for LM pH at or 24 h after harvest, Minolta a* and b*, IMF, percentage of cooking loss, and WBSF at comparable numbers of days on feed. At comparable chilled carcass weight, significant (P < 0.01) sire breed effects were detected for subjective lean quality score. Texel-sired lambs had

Influence of wholesale lamb marketing options and merchandising styles on retail yield and fabrication time.

PubMed

Lorenzen, C L; Martin, A M; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1997-01-01

Lamb carcasses (n = 94) from five packing plants, selected to vary in weight class and fat thickness, were used to determine retail yield and labor requirements of wholesale lamb fabrication. Carcasses were allotted randomly according to weight class to be fabricated as whole carcasses (n = 20), three-piece boxes (n = 22), or subprimals (n = 52). Processing times (seconds) were recorded and wholesale and retail weights (kilograms) were obtained to calculate retail yield. Subprimals were fabricated into bone-in retail cuts or boneless or semi-boneless retail cuts. Retail yield for subprimal lamb legs decreased from 85.3 +/- .6% for bone-in to 68.0 +/- .7% for a completely boneless retail product. Correspondingly, processing times increased from 126.1 +/- 5.4 s to 542.0 +/- 19.2 s for bone-in and boneless legs, respectively. For all subprimals, retail yield percentage tended to decrease and total processing time increase as cuts were fabricated to boneless or semi-boneless end points compared with a bone-in end point. Percentage retail yield did not differ (P > .05) among whole carcass, three-piece box, and subprimal marketing methods. Total processing time was shorter for subprimals (P < .05) than for the other two marketing methods.

Effects of chestnut tannins on the meat quality, welfare, and antioxidant status of heat-stressed lambs.

PubMed

Liu, Huawei; Li, Ke; Mingbin, Lv; Zhao, Jinshan; Xiong, Benhai

2016-06-01

A study was conducted to evaluate the effects of chestnut tannins (CT) on the meat quality, welfare and antioxidant status of heat-stressed lambs. Lambs in one group were raised at 20°C and fed a basal diet (N), and three other groups (32°C) were fed a basal diet with 0 (CT0), 5 (CT5), and 10 g (CT10) of CT/kg. Addition of CT increased the b* and L* values of meat and superoxide dismutase and glutathione peroxidase activity in the serum and liver of heat-stressed lambs. The malondialdehyde concentration in meat, serum, and liver of heat-stressed lambs was decreased by dietary CT supplementation. Lambs in the CT0 group had higher cortisol, T3, and T4 levels, creatine kinase activity, white blood cell count, neutrophil count, neutrophil:lymphocyte ratio and a lower lymphocyte count than that in the N and CT10 groups. In conclusion, the addition of CT improved meat quality, certain stress parameters, and the antioxidant status of heat-stressed lambs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Crack detection in fastener holes using surface acoustic wave

NASA Astrophysics Data System (ADS)

Bao, Xiao-Qi; Varadan, Vasundara V.; Varadan, Vijay K.

1995-05-01

This paper presents an investigation of the monitoring of cracks at the edge of fastener holes on plates using an ultrasonic pulse-echo technique. Our studies show that, if the surface of the plate surrounding the hold is free, an acoustic wave on the surface of the plate is able to detect the cracks located in an arc of 60 degree(s). When the inner surface of the hole is free, surface acoustic waves on the inner surface are alternate choices. For the case when all these surfaces are in tight contact with other parts, hence unavailable for mounting transducers, a particular type of Lamb wave mode is presented.

Identifying the chiral d-wave superconductivity by Josephson φ0-states.

PubMed

Liu, Jun-Feng; Xu, Yong; Wang, Jun

2017-03-07

We propose the Josephson junctions linked by a normal metal between a d + id superconductor and another d + id superconductor, a d-wave superconductor, or a s-wave superconductor for identifying the chiral d + id superconductivity. The time-reversal breaking in the chiral d-wave superconducting state is shown to result in a Josephson φ 0 -junction state where the current-phase relation is shifted by a phase φ 0 from the sinusoidal relation, other than 0 and π. The ground-state phase difference φ 0 and the critical current can be used to definitely confirm and read the information about the d + id superconductivity. A smooth evolution from conventional 0-π transitions to tunable φ 0 -states can be observed by changing the relative magnitude of two types of d-wave components in the d + id pairing. On the other hand, the Josephson junction involving the d + id superconductor is also the simplest model to realize a φ 0 - junction, which is useful in superconducting electronics and superconducting quantum computation.

Identifying the chiral d-wave superconductivity by Josephson φ0-states

PubMed Central

Liu, Jun-Feng; Xu, Yong; Wang, Jun

2017-01-01

We propose the Josephson junctions linked by a normal metal between a d + id superconductor and another d + id superconductor, a d-wave superconductor, or a s-wave superconductor for identifying the chiral d + id superconductivity. The time-reversal breaking in the chiral d-wave superconducting state is shown to result in a Josephson φ0-junction state where the current-phase relation is shifted by a phase φ0 from the sinusoidal relation, other than 0 and π. The ground-state phase difference φ0 and the critical current can be used to definitely confirm and read the information about the d + id superconductivity. A smooth evolution from conventional 0-π transitions to tunable φ0-states can be observed by changing the relative magnitude of two types of d-wave components in the d + id pairing. On the other hand, the Josephson junction involving the d + id superconductor is also the simplest model to realize a φ0- junction, which is useful in superconducting electronics and superconducting quantum computation. PMID:28266582

Effects of using ground redberry juniper and dried distillers grains with solubles in lamb feedlot diets: growth, blood serum, fecal, and wool characteristics.

PubMed

Whitney, T R; Lupton, C J; Muir, J P; Adams, R P; Stewart, W C

2014-03-01

Effects of using ground redberry juniper and dried distillers grains with solubles (DDGS) in Rambouillet lamb (n = 45) feedlot diets on growth, blood serum, fecal, and wool characteristics were evaluated. In a randomized design study with 2 feeding periods (Period 1 = 64% concentrate diet, 35 d; Period 2 = 85% concentrate diet, 56 d), lambs were individually fed 5 isonitrogenous diets: a control diet (CNTL) that contained oat hay but not DDGS or juniper or DDGS-based diets in which 0 (0JUN), 33 (33JUN), 66 (66JUN), or 100% (100JUN) of the oat hay was replaced by juniper. During Period 1, lambs fed CNTL had greater (P < 0.05) DMI and ADG and tended to have greater (P < 0.10) G:F than lambs fed 0JUN or lambs fed DDGS-based diets. Lamb DMI, ADG, and G:F quadratically increased (P < 0.008) as juniper increased in the DDGS-based diets. During Period 2, lambs fed CNTL had greater (P < 0.05) DMI than lambs fed 0JUN or lambs fed DDGS-based diets, but ADG was similar (P > 0.41). Compared to 0JUN, lambs fed CNTL had similar (P = 0.12) G:F and tended to have less G:F (P = 0.07) than lambs fed DDGS-based diets. Among lambs fed DDGS-based diets, DMI was similar (P > 0.19), ADG increased linearly (P = 0.03), and G:F tended to decrease quadratically (P = 0.06) as juniper increased in the diet. Serum IGF-1, serum urea N (SUN), and fecal N were greater (P < 0.05) and serum Ca and P and fecal P were similar (P > 0.13) for lambs fed CNTL vs. lambs fed DDGS-based diets (CNTL). Within lambs fed DDGS-based diets, SUN increased quadratically (P = 0.01) and fecal N increased linearly (P = 0.004), which can partially be attributed to increased dietary urea and condensed tannin intake. Most wool characteristics were not affected, but wool growth per kilogram of BW decreased quadratically (P = 0.04) as percentage of juniper increased in the DDGS-based diets. When evaluating the entire 91-d feeding trial, results indicated that replacing all of the ground oat hay with ground juniper leaves

Genetic evaluation of weaning weight and probability of lambing at 1 year of age in Targhee lambs

USDA-ARS?s Scientific Manuscript database

The objective of this study was to investigate genetic control of 120-day weaning weight and the probability of lambing at 1 year of age in Targhee ewe lambs. Records of 5,967 ewe lambs born from 1989 to 2012 and first exposed to rams for breeding at approximately 7 months of age were analyzed. Reco...

Statistical lamb wave localization based on extreme value theory

NASA Astrophysics Data System (ADS)

Harley, Joel B.

2018-04-01

Guided wave localization methods based on delay-and-sum imaging, matched field processing, and other techniques have been designed and researched to create images that locate and describe structural damage. The maximum value of these images typically represent an estimated damage location. Yet, it is often unclear if this maximum value, or any other value in the image, is a statistically significant indicator of damage. Furthermore, there are currently few, if any, approaches to assess the statistical significance of guided wave localization images. As a result, we present statistical delay-and-sum and statistical matched field processing localization methods to create statistically significant images of damage. Our framework uses constant rate of false alarm statistics and extreme value theory to detect damage with little prior information. We demonstrate our methods with in situ guided wave data from an aluminum plate to detect two 0.75 cm diameter holes. Our results show an expected improvement in statistical significance as the number of sensors increase. With seventeen sensors, both methods successfully detect damage with statistical significance.

Impacts of supplemental arginine on the reproductive performance of fall lambing ewes.

PubMed

Crane, A R; Redden, R R; Van Emon, M L; Neville, T L; Reynolds, L P; Caton, J S; Schauer, C S

2016-08-01

In sheep, embryonic and fetal death during pregnancy can account for 25% to 50% of the total number of corpora lutea (and thus potential embryos). The objective of this study was to determine the effects of injectable and oral Arg supplementation provided for 14 d postbreeding on the reproductive performance of naturally stimulated fall lambing ewes. Rambouillet ewes ( = 210) were exposed to rams equipped with marking harnesses to induce cyclicity in April 2012. Upon estrus detection (d 0) ewes were randomly assigned, in a completely random design, to 1 of 6 treatments for a 14-d treatment period: injectable saline (CON; = 25), injectable Ala (IVALA; = 20), injectable Arg (IVARG; = 23), oral rumen-protected Arg (RPARG; = 20), oral fish meal (FM; = 24), or oral soybean meal (SBM; = 23). Daily treatments, except CON, IVALA, and SBM, were formulated to provide supplemental Arg at 30 mg·kg BW·d and were provided at 0800 h daily. Ewes receiving injectable treatments were provided 454 g corn/d postinjection, whereas ewes receiving oral supplements were provided a ground ration of their respective treatments with corn individually at 0800 h daily. Plasma and serum samples were collected on d 0, 2, 4, 6, 8, 10, 12, and 14 from 12 ewes per treatment to evaluate plasma progesterone and serum AA concentrations. At lambing, birth weight, birth type, and sex were recorded. Weaning weights were recorded when the average age of lambs was 85 d. No differences ( ≥ 0.39) were detected for pregnancy, prolificacy, and lambing rates or lamb birth weights among treatments. However, litter weaning weight tended to be greater ( = 0.06) and weaning rates were greater ( = 0.05) in Arg-injected ewes (1.09, 0.95, 1.29, 0.72, 1.00, and 0.86, respectively). Plasma progesterone and serum Arg concentrations showed a treatment and day effect ( < 0.001), but no treatment × day interaction ( ≥ 0.99) was observed. In contrast to previous research, supplemental Arg during the first 14 d of

Alfalfa Intervention Alters Rumen Microbial Community Development in Hu Lambs During Early Life.

PubMed

Yang, Bin; Le, Jiaqing; Wu, Peng; Liu, Jianxin; Guan, Le L; Wang, Jiakun

2018-01-01

The pre-weaning period is crucial for rumen developmental plasticity, which can have a long-term impact on animal performance. Understanding the rumen microbiota during early life is important to elucidate its potential role in rumen development. In this study, the rumen microbiota of 10-day-old Hu lambs fed either milk replacer (B-10), milk replacer and starter (STA) or milk replacer and starter supplemented with alfalfa (S-ALF) in the pre- (d17, 24, and 38) and post-weaning periods (d45 and 66) were assessed to characterize rumen microbial colonization during early life and its response to fiber intervention. In the rumens of B-10 lambs, 498 operational taxonomic units belonging to 33 predominant genera were observed, and the top six predicted functions included "Membrane transport," "carbohydrate metabolism," "amino acid metabolism," "replication and repair," "translation," and "energy metabolism." Prevotella , Succinivibrio , Bifidobacterium , and Butyrivibrio abundances were increased at d38 for both STA and S-ALF groups compared to the B-10 group, whereas fibrolytic bacteria of the taxa Lachnospiraceae and Treponema were only increased in the S-ALF group at d38. A number of saccharolytic bacteria ( Bacteroidaceae ), organic acid-producing bacteria ( Coprococcus and Actinomyces ), proteolytic and amino acid fermenters ( Fusobacterium ) and fibrolytic bacteria (unclassified Ruminococcaceae ) were significantly decreased in the STA lambs but not in the S-ALF lambs at d38. After weaning and exposed to alfalfa, the rumen microbial composition in the STA group started to appear similar to that of the S-ALF lambs. The relative abundance of unclassified Clostridiales was higher in S-ALF lambs than STA lambs after weaning. Spearman's correlation analysis showed positive relationships between unclassified Lachnospiraceae , unclassified Clostridiales , Treponema , unclassified Bacteroidales , Coprococcus and crude protein intake, neutral detergent fiber intake, and

Reversibility and safety of KISS1 metastasis suppressor gene vaccine in immunocastration of ram lambs

PubMed Central

2018-01-01

Objective The aim of this study was to investigate the reversibility and safety of KISS1 metastasis suppressor (KISS1) gene vaccine in immunocastration. Methods Six eight-week old ram lambs were randomly divided into vaccinated and control groups. The vaccine (1 mg/ram lamb) was injected at weeks 0, 3, and 6 of the study. Blood samples were collected from the jugular vein before primary immunization and at weeks 2, 4, 6, 10, 14, 22, and 30 after primary immunization. All ram lambs were slaughtered at 38 weeks of age, and samples were collected. Results The specific anti-KISS1 antibody titers in vaccinated animals were significantly higher and the serum testosterone level was significantly lower than those in the control groups from week 4 to 14 after primary immunization (p<0.05). No significant difference was observed at weeks 22 and 30 after the primary immunization. Similar results were also found for scrotal circumference, testicular weight, length, breadth, and spermatogenesis in seminiferous tubules in week 30 after primary immunization. KS (KISS1-hepatitis B surface antigen S) fusion fragment of KISS1 gene vaccine was not detected in host cell genomic DNA of 9 tissues of the vaccinated ram lambs by polymerase chain reaction. Conclusion The effects of KISS1 gene vaccine in immunocastration were reversible and no integration events were recorded. PMID:29268573

Reversibility and safety of KISS1 metastasis suppressor gene vaccine in immunocastration of ram lambs.

PubMed

Han, Yan-Guo; Liu, Gui-Qiong; Jiang, Xun-Ping; Xiang, Xing-Long; Huang, Yong-Fu; Nie, Bin; Zhao, Jia-Yu; Nabeel, Ijaz; Tesema, Birhanu

2018-06-01

The aim of this study was to investigate the reversibility and safety of KISS1 metastasis suppressor ( KISS1 ) gene vaccine in immunocastration. Six eight-week old ram lambs were randomly divided into vaccinated and control groups. The vaccine (1 mg/ram lamb) was injected at weeks 0, 3, and 6 of the study. Blood samples were collected from the jugular vein before primary immunization and at weeks 2, 4, 6, 10, 14, 22, and 30 after primary immunization. All ram lambs were slaughtered at 38 weeks of age, and samples were collected. The specific anti- KISS1 antibody titers in vaccinated animals were significantly higher and the serum testosterone level was significantly lower than those in the control groups from week 4 to 14 after primary immunization (p<0.05). No significant difference was observed at weeks 22 and 30 after the primary immunization. Similar results were also found for scrotal circumference, testicular weight, length, breadth, and spermatogenesis in seminiferous tubules in week 30 after primary immunization. KS ( KISS1 -hepatitis B surface antigen S ) fusion fragment of KISS1 gene vaccine was not detected in host cell genomic DNA of 9 tissues of the vaccinated ram lambs by polymerase chain reaction. The effects of KISS1 gene vaccine in immunocastration were reversible and no integration events were recorded.

Meta-analysis of lamb birth weight as influenced by pregnancy nutrition of multiparous ewes.

PubMed

Roca Fraga, Fernando J; Lagisz, Malgorzata; Nakagawa, Shinichi; Lopez-Villalobos, Nicolas; Blair, Hugh T; Kenyon, Paul R

2018-05-04

Across the literature, there is large variation in lamb birth weight responses to changes in the ewe pregnancy nutrition. Much of this heterogeneity has been attributed to several factors inherent to each experiment; however, the relative contribution of these experimental factors has not yet been quantified. This meta-analysis aimed to systematically review the variation in lamb birth weight responses across nutritional studies involving adult multiparous ewes. Effect-sizes for individual studies were estimated using the unbiased estimator Hedges' g, whereby positive and negative values indicate heavier and lighter treatment lambs vs. controls, respectively. Heterogeneity varied between early-, mid- and late-pregnancy undernutrition studies (I2total [early pregnancy] = 19.90%, I2total [midpregnancy] = 52.10%, I2total [late pregnancy] = 68.70%). The small average effects for early- (0.04, highest posterior density [HPD] interval = -0.22, 0.28) and mid-pregnancy undernutrition (-0.15, HPD interval = -0.35, 0.05) suggest that if farmers anticipate a potential feed shortage, ewes can be allowed to lose weight providing nutrition is resumed to adequate levels later in pregnancy. On the contrary, late-pregnancy undernutrition was associated with a significant decrease in lamb birth weight (-0.72, HPD interval = -0.86, -0.55). Thus, management practices should focus on ensuring adequate nutrition in late pregnancy. Increasing lamb birth weight could be possible by feeding ewes above their pregnancy maintenance requirement (0.23, HPD interval = 0.002, 0.48), though the number of studies is limited and further research is needed.

Exploration of S-wave velocity profiles at strong motion stations in Eskisehir, Turkey, using microtremor phase velocity and S-wave amplification

NASA Astrophysics Data System (ADS)

Yamanaka, Hiroaki; Özmen, Ögur Tuna; Chimoto, Kosuke; Alkan, Mehmet Akif; Tün, Muammer; Pekkan, Emrah; Özel, Oguz; Polat, Derya; Nurlu, Murat

2018-05-01

We have explored 1D S-wave velocity profiles of shallow and deep soil layers over a basement at strong motion stations in Eskisehir Province, Turkey. Microtremor array explorations were conducted at eight strong motion stations in the area to know shallow 1D S-wave velocity models. Rayleigh wave phase velocity at a frequency range from 3 to 30 Hz was estimated with the spatial autocorrelation analysis of array records of vertical microtremors at each station. Individual phase velocity was inverted to a shallow S-wave velocity profile. Low-velocity layers were identified at the stations in the basin. Site amplification factors from S-wave parts of earthquake records that had been estimated at the strong motion stations by Yamanaka et al. (2017) were inverted to the S-wave velocities and Q-values of the sedimentary layers. The depths to the basement with an S-wave velocity of 2.2 km/s are about 1 km in the central part of the basin, while the basement becomes shallow as 0.3 km in the marginal part of the basin. We finally discussed the effects of the shallow and deep sedimentary layers on the 1D S-wave amplification characteristics using the revealed profiles. It is found that the shallow soil layers have no significant effects in the amplification at a frequency range lower than 3 Hz in the area.

Intake of honey mesquite (Prosopis glandulosa) leaves by lambs using different levels of activated charcoal

USDA-ARS?s Scientific Manuscript database

A 24-day feeding trial was conducted to assess the effect of feeding four levels of activated charcoal (0.0, 0.33, 0.67 and 1.00 g/kg of body weight) on intake of honey mesquite leaves (Prosopis glandulosa Torr.) by 20 wether lambs (36.6 ± 0.6 kg) that were randomly assigned to treatments. Lambs wer...

Predicting S-wave velocities for unconsolidated sediments at low effective pressure

USGS Publications Warehouse

Lee, Myung W.

2010-01-01

Accurate S-wave velocities for shallow sediments are important in performing a reliable elastic inversion for gas hydrate-bearing sediments and in evaluating velocity models for predicting S-wave velocities, but few S-wave velocities are measured at low effective pressure. Predicting S-wave velocities by using conventional methods based on the Biot-Gassmann theory appears to be inaccurate for laboratory-measured velocities at effective pressures less than about 4-5 megapascals (MPa). Measured laboratory and well log velocities show two distinct trends for S-wave velocities with respect to P-wave velocity: one for the S-wave velocity less than about 0.6 kilometer per second (km/s) which approximately corresponds to effective pressure of about 4-5 MPa, and the other for S-wave velocities greater than 0.6 km/s. To accurately predict S-wave velocities at low effective pressure less than about 4-5 MPa, a pressure-dependent parameter that relates the consolidation parameter to shear modulus of the sediments at low effective pressure is proposed. The proposed method in predicting S-wave velocity at low effective pressure worked well for velocities of water-saturated sands measured in the laboratory. However, this method underestimates the well-log S-wave velocities measured in the Gulf of Mexico, whereas the conventional method performs well for the well log velocities. The P-wave velocity dispersion due to fluid in the pore spaces, which is more pronounced at high frequency with low effective pressures less than about 4 MPa, is probably a cause for this discrepancy.

Mutagenicity of basic fractions derived from lamb and beef cooked by common household methods.

PubMed

Barrington, P J; Baker, R S; Truswell, A S; Bonin, A M; Ryan, A J; Paulin, A P

1990-03-01

Mutagen production was examined in lamb and beef in relation to certain common household cooking methods. Mutagenicity was assessed, after extraction of the basic fraction of cooked meat samples, using Salmonella typhimurium strain TA1538 with added rat-liver S-9 homogenate. Little or no mutagenicity was found in barbecued lamb chops, in microwave-cooked lamb chops, sirloin steak, leg of lamb, or rolled beef loaf, in roasted leg of lamb or rolled beef loaf, in stewed blade steak or in boiled chuck steak. However, the basic fraction from well-done, edible fried or grilled meat contained mutagenic activity equivalent to approximately 30,000 TA1538 revertants/100 g cooked meat. It was found tht the mutagenic activity of grilled lamb chops, sirloin and rump steaks was directly related to the average surface temperatures attained during cooking. Use of butter as a frying medium was particularly associated with higher mutagenicity in meat samples. Fried meats (rump and fillet steaks) generally yielded higher mutagenic activity than did grilled meats (rump steak, lamb chops) at comparable temperatures of the cooking medium. Using similar cooking procedures, lamb did not differ markedly from beef in mutagenic activity.

Antioxidant status, metabolic profile and immune response of lambs supplemented with tannin rich Ficus infectoria leaf meal.

PubMed

Dey, Avijit; Dutta, Narayan; Pattanaik, Ashok Kumar; Sharma, Kusumakar

2015-02-01

To study the effect of supplementation of tanniferous tree leaves Ficus infectoria on antioxidant status and immune response, twenty four lambs were randomly divided into four groups of six each in a completely randomized design and fed either a conventional supplement (CON) or experimental supplements (FILM-I, FILM-II and FILM-III) containing 1.0, 1.5 and 2.0% condensed tannins (CT), respectively by replacement of wheat bran of supplement CON with Ficus infectoria leaf meal (FILM). Blood biochemical profile was monitored in all lambs at 0, 45, 90, 135, 180 days of feeding. Although haemato-biochemical parameters remained similar, there was significant (p < 0.05) improvement in catalase activity, total thiol and protein thiol groups with reduction in lipid peroxidation (LPO) in lambs fed FILM diet irrespective of levels. However, intracellular status of reduced glutathione, and superoxide dismutase activity was improved (p < 0.05) only in FILM-II and FILM-III supplemented lambs. The cell-mediated immune response was significantly (p < 0.05) improved in all the lambs fed FILM supplemented diets. Improved antioxidant status and immunity in FILM supplemented lambs increased voluntary feed intake irrespective of level. However, the average daily gain for a period of 180 d showed a significant (p < 0.05) increase by the supplementation of FILM-II diet containing 1.5% CT. The present study reveals that the supplementation of Ficus infectoria leaf meal up to 21.2% in the concentrate mixture could improve the antioxidant status and immunity in lambs. However, as feed efficiency was reduced at higher levels due to presence of CT, 15.9% supplementation containing 1.5% condensed tannins in concentrate mixture is suggested to improve the health and production performance of lambs.

Nonlinear attenuation of S-waves and Love waves within ambient rock

NASA Astrophysics Data System (ADS)

Sleep, Norman H.; Erickson, Brittany A.

2014-04-01

obtain scaling relationships for nonlinear attenuation of S-waves and Love waves within sedimentary basins to assist numerical modeling. These relationships constrain the past peak ground velocity (PGV) of strong 3-4 s Love waves from San Andreas events within Greater Los Angeles, as well as the maximum PGV of future waves that can propagate without strong nonlinear attenuation. During each event, the shaking episode cracks the stiff, shallow rock. Over multiple events, this repeated damage in the upper few hundred meters leads to self-organization of the shear modulus. Dynamic strain is PGV divided by phase velocity, and dynamic stress is strain times the shear modulus. The frictional yield stress is proportional to depth times the effective coefficient of friction. At the eventual quasi-steady self-organized state, the shear modulus increases linearly with depth allowing inference of past typical PGV where rock over the damaged depth range barely reaches frictional failure. Still greater future PGV would cause frictional failure throughout the damaged zone, nonlinearly attenuating the wave. Assuming self-organization has taken place, estimated maximum past PGV within Greater Los Angeles Basins is 0.4-2.6 m s-1. The upper part of this range includes regions of accumulating sediments with low S-wave velocity that may have not yet compacted, rather than having been damaged by strong shaking. Published numerical models indicate that strong Love waves from the San Andreas Fault pass through Whittier Narrows. Within this corridor, deep drawdown of the water table from its currently shallow and preindustrial levels would nearly double PGV of Love waves reaching Downtown Los Angeles.

Evaluation of ewe vaccination as a tool for increasing bighorn lamb survival following pasteurellosis epizootics.

PubMed

Cassirer, E F; Rudolph, K M; Fowler, P; Coggins, V L; Hunter, D L; Miller, M W

2001-01-01

We conducted field and laboratory experiments to evaluate whether treating pregnant bighorn ewes with a combination of an experimental Pasteurella trehalosi and Mannheimia haemolytica (formerly P. haemolytica) vaccine and a commercially-available bovine P. multocida and M. haemolytica vaccine would increase lamb survival following a pneumonia epidemic. Three free-ranging bighorn herds affected by pasteurellosis outbreaks between November 1995 and June 1996 were included in the field experiment. Post-epidemic lamb survival was low in all three herds in 1996, with November lamb:ewe ratios of < or = 8:100. In March 1997, thirty-six ewes (12/herd) were captured and radiocollared. Half of the ewes captured in each herd were randomly selected to receive both vaccines; the other half were injected with 0.9% saline solution as controls. Lambs born to radiocollared ewes were observed two or more times per week and were considered to have survived if they were alive in October 1997, about 6 mo after birth. Lamb survival differed among herds (range 22% to 100%), and survival of lambs born to vaccinated ewes was lower (P = 0.08) than survival of lambs born to unvaccinated ewes. Bronchopneumonia (pasteurellosis) was the dominant cause of mortality among lambs examined. We concurrently evaluated vaccine effects on survival of lambs born to seven captive ewes removed from the wild during the 1995-96 epidemic. Antibody titers were high in captive ewes prior to vaccination, and vaccines failed to enhance antibody titers in treated captive ewes. None of the captive-born lambs survived. These data suggest that, using existing technology, vaccinating bighorn ewes following pneumonia epidemics has little chance of increasing neonatal survival and population recovery.

Winter-feeding systems for gestating sheep II. Effects on feedlot performance, glucose tolerance, and carcass composition of lamb progeny.

PubMed

Radunz, A E; Fluharty, F L; Susin, I; Felix, T L; Zerby, H N; Loerch, S C

2011-02-01

Mature pregnant crossbred ewes (n = 90) were used in a randomized complete block design experiment and were assigned to 1 of 3 winter-feeding systems differing in primary feed source: haylage (HL), limit-fed corn (CN), or limit-fed dried distillers grains (DDGS). Effects of these winter-feeding strategies on postweaning progeny performance were determined. Lamb progeny (n = 96) were weaned at 61 ± 4 d of age and fed a common high-concentrate diet. Lambs were assigned to feedlot pen (n = 18) based on dam mid-gestation pen. Growth rate, DMI, and ADG were determined for the first 40 d of the finishing period. At 96 ± 4 d of age, 1 wether lamb was randomly selected from each pen (n = 18) for a glucose tolerance test. The experiment was terminated, and lambs were slaughtered individually when they were determined to have achieved 0.6-cm 12th-rib fat thickness. After a 24-h chill, carcass data were collected and a 2.54-cm chop was removed from each lamb from the LM posterior to the 12th rib for ether extract analysis. Additional carcass measurements of bone, muscle, and fat from the shoulder, rack, loin, and leg were collected on 35 carcasses. At weaning, lamb BW was not different among treatments, whereas final BW tended to be greater (P = 0.09) for lambs from ewes fed DDGS and CN during gestation than from those fed HL. Overall lamb growth rate from birth to slaughter was not different among treatments. Lambs from ewes fed DDGS vs. CN or HL tended to have a greater initial insulin response (P = 0.09). Dressing percent was less (P = 0.04) in lambs from ewes fed DDGS, but no difference (P = 0.16) was detected in HCW among treatments. As expected, 12th rib fat thickness was similar among treatments, whereas LM area was largest to smallest (P = 0.05) in lambs from ewes fed CN, HL, and DDGS, respectively. Proportion of internal fat tended to be greatest to smallest (P = 0.06) in lambs from ewes fed DDGS, CN, and HL, respectively. Calculated boneless trimmed retail cuts

Effects of stunning with different carbon dioxide concentrations and exposure times on suckling lamb meat quality.

PubMed

Bórnez, R; Linares, M B; Vergara, H

2009-03-01

Forty-nine Manchega breed male suckling lambs were used to determine the effect of different stunning methods (using two different CO2 concentrations and exposure times) on lamb meat quality. The lambs were allocated to five stunning treatments including four CO2 treatments [80% CO2 for 90s (G1); 90% CO2 for 90s (G2); 90% CO2 for 60s (G3); 80% CO2 for 60s (G4)] and an electrically stunned control group (G5). The gas-stunning treatments did not cause neither haematomas nor blood splash in the carcasses. Meat quality was evaluated by testing pH, colour (L(∗), a(∗), b(∗), chroma, hue values), water holding capacity (WHC), cooking loss (CL), shear force (SF), drip loss (DL) and total aerobic bacteria. Statistical differences in pH at 24h post-mortem, colour, WHC and CL were not found among groups. After 7 days post-mortem, there were statistical differences among groups in pH (highest in G4 and G5) and in DL (highest in G1). There were differences in SF due to stunning method evident after 72h and 7 days ageing. The statistical differences (P<0.01) among groups on total aerobic bacteria at 24h (lower and higher values in G2 and G5, respectively) disappeared at 7 days post-mortem. As G2 as G3, could be recommended to stunning suckling lambs since a highest stability with ageing time on meat quality was found using 90% CO2.

Effect of maternal dietary restriction during pregnancy on lamb carcass characteristics and muscle fiber composition.

PubMed

Daniel, Z C T R; Brameld, J M; Craigon, J; Scollan, N D; Buttery, P J

2007-06-01

Two experiments were conducted to determine whether the decreased proportion of fast muscle fibers seen previously in 2-wk-old lambs from ewes that were dietary restricted from d 30 to 70 of gestation are still evident in older lambs and what the consequences may be in terms of growth rates and carcass composition. Throughout both experiments, ewes were fed on an individual basis according to the recommended dietary allowance throughout pregnancy relative to metabolic BW (BW(0.73)). Control groups were fed as above, and the treatment groups had their nutrient supply reduced to 50% of this recommended allowance from d 30 to 70 (Exp. 1) or d 30 to 85 (Exp. 2) of gestation, after which they were returned to the same level of nutrition as the control group. All twin lambs were kept with their dams, and at 2 wk were given access to creep. After weaning, lambs were individually housed and fed ad libitum to 24 or 17 wk of age for Exp. 1 and 2, respectively. Although not significant (P = 0.18), growth to 24 wk (Exp. 1) resulted in a small decrease in the protein content and therefore an increase in the fat:lean ratio in the carcass of lambs subjected to maternal dietary restriction. This was not apparent when animals were slaughtered at 17 wk (Exp. 2; P > 0.68). Few significant effects of maternal dietary restriction on the fiber type composition of muscles were observed. In Exp. 1 the number of fast fibers increased (P < 0.008) with no effect on slow fiber number in LM. In Exp. 2 an increase in the total number of fibers in male lambs and an increase in type II (A and B) fibers in female lambs were observed in the LM, and an increase in IIB fiber number was observed in semitendinosus (ST) muscle from male lambs. Prenatal maternal dietary restriction during the time of muscle differentiation demonstrated an increase in type IIB muscle fibers and increase in intramuscular fat; although significant, effects on subsequent carcass quality of lambs were relatively small. These

Growth performance, feed digestibility, body composition, and feeding behavior of high- and low-residual feed intake fat-tailed lambs under moderate feed restriction.

PubMed

Rajaei Sharifabadi, H; Naserian, A A; Valizadeh, R; Nassiry, M R; Bottje, W G; Redden, R R

2016-08-01

Two experiments were conducted to evaluate the effect of moderate feed restriction on productivity of lambs classified on the basis of phenotypic expression of residual feed intake (RFI). In Exp. 1, 58 fat-tailed Kurdi ram lambs (32.1 ± 4.2 kg BW) were individually fed, ad libitum, a pelleted diet (35% alfalfa hay and 65% concentrate). Feed intake and ADG were determined for a 6-wk period and 3 feed efficiency measures including RFI, G:F, and partial efficiency of maintenance (PEM) were calculated. The lambs were sorted based on RFI and the 16 highest RFI (RFI ≥ mean + 0.5 SD) and 16 lowest RFI (RFI ≤ mean - 0.5 SD) lambs were subjected to body composition (BC) and DM digestibility (DMD) analysis. Feeding behavior traits (FB) were also evaluated for 24 h using a regular 5-min interval observation method. The high- and low-RFI lambs (14 lambs/RFI group) so classified in Exp. 1 were used in Exp. 2. Half of the lambs in each RFI group were randomly selected to be fed ad libitum or 85% of ad libitum (restricted feeding), which resulted in 4 experimental groups: 1) ad libitum high-RFI, 2) feed restricted high-RFI, 3) ad libitum low-RFI, and 4) feed restricted low-RFI. The lambs were fed the same diet as Exp. 1, and growth efficiency during a 6-wk test period as well as BC, DMD, and FB were also determined in Exp. 2. In Exp. 1, the low-RFI lambs consumed 14% ( < 0.01) less feed than high-RFI lambs. Differences were also observed between high- and low-RFI groups for G:F ( = 0.01), RFI ( < 0.01), and PEM ( < 0.01) in Exp. 1, but no differences were detected between high- and low-RFI lambs for ADG ( = 0.79), DMD ( = 0.42), BC ( > 0.72), and FB ( > 0.24). In Exp.2, the restriction feeding regime negatively affected ADG ( < 0.01) and G:F ( = 0.02) in low-RFI lambs, whereas G:F ( = 0.02) and PEM ( < 0.01) were improved in high-RFI lambs under the feed restriction condition. No effects of feed restriction on DMD ( = 0.87) and BC ( > 0.05) were observed. The lambs fed at

Multimodal sparse reconstruction in guided wave imaging of defects in plates

NASA Astrophysics Data System (ADS)

Golato, Andrew; Santhanam, Sridhar; Ahmad, Fauzia; Amin, Moeness G.

2016-07-01

A multimodal sparse reconstruction approach is proposed for localizing defects in thin plates in Lamb wave-based structural health monitoring. The proposed approach exploits both the sparsity of the defects and the multimodal nature of Lamb wave propagation in plates. It takes into account the variation of the defects' aspect angles across the various transducer pairs. At low operating frequencies, only the fundamental symmetric and antisymmetric Lamb modes emanate from a transmitting transducer. Asymmetric defects scatter these modes and spawn additional converted fundamental modes. Propagation models are developed for each of these scattered and spawned modes arriving at the various receiving transducers. This enables the construction of modal dictionary matrices spanning a two-dimensional array of pixels representing potential defect locations in the region of interest. Reconstruction of the region of interest is achieved by inverting the resulting linear model using the group sparsity constraint, where the groups extend across the various transducer pairs and the different modes. The effectiveness of the proposed approach is established with finite-element scattering simulations of the fundamental Lamb wave modes by crack-like defects in a plate. The approach is subsequently validated with experimental results obtained from an aluminum plate with asymmetric defects.

Effect of mechanically deboned poultry meat content on technological properties and sensory characteristics of lamb and mutton sausages

PubMed Central

Perez, Juan Ramon Olalquiaga

2018-01-01

Objective This study aimed to develop a value-added product concerning technological and sensory characteristics changes of the use of mechanically deboned poultry meat (MDPM) as meat replacer in lamb and mutton emulsion-type sausages (mortadella). Methods Sausages were produced with lamb and mutton and with different contents of MDPM. Six treatments, using lamb or mutton and 0%, 30%, and 60% of MDPM in relation to the meat batter, were produced and analyzed for pH, proximal composition, calcium and residual nitrite content, water activity, 2-thiobarbituric acid reactive substances (TBARS), instrumental color and texture profile. The sensory profile of the mortadella’s was also evaluated by acceptance test and check-all-that-applies (CATA) analysis. Results The MDPM addition increased (p<0.05) fat, residual nitrite and calcium content in the all sausage formulations, but mutton sausage had (p<0.05) higher fat and lower moisture content than lamb sausage. The pH, water activity, TBARS index and color was not affected by MDPM additions, while the mutton sausages were significantly redder (higher a*, C*, and lower h°) and darker (lower L*) than lamb sausages. Adding up to 60% of MDPM reduced (p<0.05) sausages hardness and chewiness. Overall, the meat replacement by MDPM increased the sausages acceptance, but the mutton sausage with 30% of MDPM replacer were the most preferred. Consumers related that pink color, glossy appearance, poultry meat-like taste, soft texture, juicy and greasy mouth feel to all sausages contain MDPM according to CATA analysis. Conclusion Mutton from culled ewes can be utilized for mortadella production with 30% replacement of lean mutton and fat by MDPM. PMID:28920407

Influence of distiller's dried grains with solubles on ram lamb growth and reproductive traits.

PubMed

Crane, Alison R; Redden, Reid R; Crouse, Matthew S; Kirsch, James D; Borowicz, Pawel P; Held, Jeffrey E; Swanson, Kendall C; Schauer, Christopher S

2018-04-14

The hypothesis of this experiment was that increasing the inclusion level of distiller's dried grains with solubles (DDGS) in the diets would decrease semen quality but have no negative effects on growth performance. Following the removal of DDGS from the diet, it was hypothesized that the ram lambs would recover and become reproductively sound, independent of treatment. To test this hypothesis, Suffolk and Hampshire ram lambs (n = 112) were allocated to 4 treatments (n = 4 pens per treatment; 7 rams per pen) in a completely randomized design. Dietary treatments were 60% corn, 25% oats, and 15% commercial lamb pellet (CON), 15% of the ration as DDGS substituted for corn (% DM basis; 15DDGS), 30% of the ration as DDGS substituted for corn (% DM basis; 30DDGS), and 45% of the ration as DDGS substituted for corn (% DM basis; 45DDGS). Lambs were fed for 112 d on their respective treatment, after which they were placed on the CON ration until day 168. Lambs were weighed on consecutive d at the beginning (days 0 and 1) and end (days 167 and 168) of the study. Scrotal circumference was measured on all lambs on days 84, 112, 140, and 168. Semen samples were collected on a subset of 64 rams (4 rams per pen) to evaluate semen quality on days 84, 112, 140, and 168. Blood samples were collected on the same subset of rams every 14 d throughout the study. A quadratic effect on BW on day 112 and overall BW (P = 0.03 and P = 0.005, respectively), ADG on day 112 and overall ADG (P = 0.02 and P = 0.02, respectively), DMI (P = 0.007) on day 112, and a cubic effect (P = 0.05) for overall G:F were observed. Overall and day 168 scrotal circumference had a quadratic (P = 0.05) response. A linear increase in spermatozoa concentration on day 168 was observed (P = 0.03) as DDGS concentration increased in the treatment diets, although rams in this stage of the study were no longer receiving DDGS. Overall, testosterone concentrations exhibited a linear decrease (P = 0.005) as DDGS increased

Ground Juniperus pinchotii and urea in supplements fed to Rambouillet ewe lambs: I. Feedlot growth traits, blood serum parameters, and fecal characteristics.

PubMed

Whitney, T R

2017-08-01

Ground woody products and urea are low-cost roughage and N sources. Rambouillet ewe lambs ( = 48, 6 lambs/treatment; initial BW = 42 kg ± 3.8) were used to evaluate effects of using ground (juniper) and urea in supplements on feedlot lamb growth traits, blood serum parameters, and fecal characteristics. In a randomized complete block design (40 d), lambs were individually fed an ad libitum basal sorghum-Sudangrass hay diet, which was fed separate from 1 of 8 supplemental diets (6 lambs/diet; 533 g of supplement/d, as-fed basis). Treatment structure was a 4 × 2 factorial: 4 concentrations of ground juniper (JN: 15%, 30%, 45%, or 60% of DM) and 2 concentrations of urea (UR: 1 or 3% of DM). Lamb growth traits were evaluated on d 0, 5, 12, 19, 26, 33, and 40; blood serum was evaluated on d 6 to 8, 20 to 22, and 34 (at h 3 and 6), and feces was evaluated on d 35. Compared to lambs fed all of the other treatments, lambs fed JN60UR1 or JN60UR3 had reduced supplement DMI (negative quadratic, = 0.007). Hay and total DMI were variable across day (JN × UR × day, < 0.04), but no linear or quadratic trends were detected ( > 0.10). A JN × day interaction was detected ( < 0.001) for lamb BW and the JN × day negative quadratic trend ( = 0.02) for BW was influenced by reduced ADG (linear decrease, < 0.001) of lambs fed JN60. Lambs supplemented with UR3 vs. UR1 tended ( = 0.06) to have reduced BW but had similar ( > 0.17) ADG and G:F. Lamb G:F fluctuated across day (JN × day, = 0.007), but the JN × day quadratic trend ( < 0.001) was mainly due to reduced G:F in lambs fed JN45 or JN60 diets. As the percentage of JN increased in the supplement, serum IGF-1 linearly decreased ( = 0.04), and serum urea N quadratically increased ( < 0.001). The UR × hour interaction ( < 0.001) for serum urea N resulted from a greater decline from 3 to 6 h after feeding in lambs supplemented with UR1 vs. UR3. Increasing JN concentration tended to quadratically increase ( = 0.09) fecal DM and

Mode separation in frequency-wavenumber domain through compressed sensing of far-field Lamb waves

NASA Astrophysics Data System (ADS)

Gao, Fei; Zeng, Liang; Lin, Jing; Luo, Zhi

2017-07-01

This method based on Lamb waves shows great potential for long-range damage detection. Mode superposition resulting from multi-modal and dispersive characteristics makes signal interpretation and damage feature extraction difficult. Mode separation in the frequency-wavenumber (f-k) domain using a 1D sparse sensing array is a promising solution. However, due to the lack of prior knowledge about damage location, this method based on 1D linear measurement, for the mode extraction of arbitrary reflections caused by defects that are not in line with the sensor array, is restricted. In this paper, an improved compressed sensing method under the far-field assumption is established, which is beneficial to the reconstruction of reflections in the f-k domain. Hence, multiple components consisting of structure and damage features could be recovered via a limited number of measurements. Subsequently, a mode sweeping process based on theoretical dispersion curves has been designed for mode characterization and direction of arrival estimation. Moreover, 2D f-k filtering and inverse transforms are applied to the reconstructed f-k distribution in order to extract the purified mode of interest. As a result, overlapping waveforms can be separated and the direction of defects can be estimated. A uniform linear sensor array consisting of 16 laser excitations is finally employed for experimental investigations and the results demonstrate the efficiency of the proposed method.

Fecal microbiota of lambs fed purple prairie clover (Dalea purpurea Vent.) and alfalfa (Medicago sativa).

PubMed

Huang, Qianqian; Holman, Devin B; Alexander, Trevor; Hu, Tianming; Jin, Long; Xu, Zhongjun; McAllister, Tim A; Acharya, Surya; Zhao, Guoqi; Wang, Yuxi

2018-01-01

The present study assessed the effect of purple prairie clover (PPC) and PPC condensed tannins (CT) on the fecal microbiota of lambs using high-throughput 16S rRNA gene pyrosequencing. A total of 18 individual lambs were randomly divided into three groups and fed either green chop alfalfa (Alf), a 40:60 (DM basis; Mix) mixture of Alf and PPC, or Mix supplemented with polyethylene glycol (Mix-P) for 18 days. Fecal samples were collected on days 13 through 18 using digital rectal retrieval. The DNA of fecal samples was extracted and the microbial 16S rRNA gene amplicons were sequenced using 454 pyrosequencing. Regardless of diet, the bacterial community was dominated by Firmicutes and Bacteroidetes with many sequences unclassified at the genus level. Forage type and CT had no effect on the fecal microbial composition at the phylum level or on α-diversity. Compared to the Alf diet, the Mix diet reduced the relative abundance of Akkermansia (P = 0.03) and Asteroleplasma (P = 0.05). Fecal microbial populations in Alf and Mix-P clustered separately from each other when assessed using unweighted UniFrac (P < 0.05). These results indicate that PPC CT up to 36 g/kg DM in the diet had no major effect on fecal microbial flora at the phyla level and exerted only minor effects on the genera composition of fecal microbiota in lambs.

Alfalfa Intervention Alters Rumen Microbial Community Development in Hu Lambs During Early Life

PubMed Central

Yang, Bin; Le, Jiaqing; Wu, Peng; Liu, Jianxin; Guan, Le L.; Wang, Jiakun

2018-01-01

The pre-weaning period is crucial for rumen developmental plasticity, which can have a long-term impact on animal performance. Understanding the rumen microbiota during early life is important to elucidate its potential role in rumen development. In this study, the rumen microbiota of 10-day-old Hu lambs fed either milk replacer (B-10), milk replacer and starter (STA) or milk replacer and starter supplemented with alfalfa (S-ALF) in the pre- (d17, 24, and 38) and post-weaning periods (d45 and 66) were assessed to characterize rumen microbial colonization during early life and its response to fiber intervention. In the rumens of B-10 lambs, 498 operational taxonomic units belonging to 33 predominant genera were observed, and the top six predicted functions included “Membrane transport,” “carbohydrate metabolism,” “amino acid metabolism,” “replication and repair,” “translation,” and “energy metabolism.” Prevotella, Succinivibrio, Bifidobacterium, and Butyrivibrio abundances were increased at d38 for both STA and S-ALF groups compared to the B-10 group, whereas fibrolytic bacteria of the taxa Lachnospiraceae and Treponema were only increased in the S-ALF group at d38. A number of saccharolytic bacteria (Bacteroidaceae), organic acid-producing bacteria (Coprococcus and Actinomyces), proteolytic and amino acid fermenters (Fusobacterium) and fibrolytic bacteria (unclassified Ruminococcaceae) were significantly decreased in the STA lambs but not in the S-ALF lambs at d38. After weaning and exposed to alfalfa, the rumen microbial composition in the STA group started to appear similar to that of the S-ALF lambs. The relative abundance of unclassified Clostridiales was higher in S-ALF lambs than STA lambs after weaning. Spearman’s correlation analysis showed positive relationships between unclassified Lachnospiraceae, unclassified Clostridiales, Treponema, unclassified Bacteroidales, Coprococcus and crude protein intake, neutral detergent fiber

Measurements of the branching fractions for D + → K S 0 K S 0 K + , K S 0 K S 0 π + and D 0 → K S 0 K S 0 , K S 0 K S 0 K S 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ablikim, M.; Achasov, M. N.; Ahmed, S.

By analyzing 2.93 fb-1 of data taken at the ψ (3770) resonance peak with the BESIII detector, we measure the branching fractions for the hadronic decays D +→Kmore » $$0\\atop{S}$$K$$0\\atop{S}$$K +, D +→K$$0\\atop{S}$$K$$0\\atop{S}$$π +. D 0→K$$0\\atop{S}$$K$$0\\atop{S}$$ and D 0→K$$0\\atop{S}$$K$$0\\atop{S}$$K$$0\\atop{S}$$.« less