Organophosphate degrading microorganisms and enzymes as biocatalysts in environmental and personal decontamination applications.

PubMed

Yair, Simo; Ofer, Butnaro; Arik, Eisenkraft; Shai, Shrot; Yossi, Rosman; Tzvika, Dushnitsky; Amir, Krivoy

2008-01-01

One of the major challenges in dealing with chemical warfare agent (CWA) dispersal, whether in the battlefield or after a terror act, is decontamination and rehabilitation of any contaminated area. Organophosphates (OPs) are considered to be among the deadliest CWAs to date. Other OPs are used as pesticides in modern agriculture, and are considered environmentally hazardous. Current methods for OP decontamination are either dangerous or insufficiently effective. As a promising solution for this problem, bioremediation--the use of biocomponents for environmental remediation--is a potentially effective, safe, and environment-friendly method. The technology relies on several enzymatic mechanisms, and can be applied in various ways. We will review recent achievements and potential applications, such as biocatalyst-containing foams and an enzymatic sponge, for environmental as well as personal exterior decontamination.

Research and Development initiative of Satellite Technology Application for Environmental Issues in Asia Region

NASA Astrophysics Data System (ADS)

Hamamoto, K.; Kaneko, Y.; Sobue, S.; Oyoshi, K.

2016-12-01

Climate change and human activities are directly or indirectly influence the acceleration of environmental problems and natural hazards such as forest fires, drought and floods in the Asia-Pacific countries. Satellite technology has become one of the key information sources in assessment, monitoring and mitigation of these hazards and related phenomenon. However, there are still gaps between science and application of space technology in practical usage. Asia-Pacific Regional Space Agency Forum (APRSAF) recommended to initiate the Space Applications for Environment (SAFE) proposal providing opportunity to potential user agencies in the Asia Pacific region to develop prototype applications of space technology for number of key issues including forest resources management, coastal monitoring and management, agriculture and food security, water resource management and development user-friendly tools for application of space technology. The main activity of SAFE is SAFE prototyping. SAFE prototyping is a demonstration for end users and decision makers to apply space technology applications for solving environmental issues in Asia-Pacific region. By utilizing space technology and getting technical support by experts, prototype executers can develop the application system, which could support decision making activities. SAFE holds a workshop once a year. In the workshop, new prototypes are approved and the progress of on-going prototypes are confirmed. Every prototype is limited for two years period and all activities are operated by volunteer manner. As of 2016, 20 prototypes are completed and 6 prototypes are on-going. Some of the completed prototypes, for example drought monitoring in Indonesia were applied to operational use by a local official organization.

Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

PubMed

Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

2011-07-01

More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

Tensile Fabrics Enhance Architecture Around the World

NASA Technical Reports Server (NTRS)

2009-01-01

Using a remarkable fabric originally developed to protect Apollo astronauts, Birdair Inc. of Amherst, New York, has crafted highly durable, safe, environmentally friendly, and architecturally stunning tensile membrane roofs for over 900 landmark structures around the world. Travelers in airports, sports fans at stadiums, and shoppers in malls have all experienced the benefits of the Teflon-coated fiberglass fabric that has enabled Birdair to grow from a small company established in its founder?s kitchen in 1955 to a multimillion-dollar specialty contractor today.

Environmental friendly technology for aluminum electrolytic capacitors recycling from waste printed circuit boards.

PubMed

Wang, Jianbo; Xu, Zhenming

2017-03-15

up to now, the recycling of e-waste should be developed towards more depth and refinement to promote industrial production of e-waste resource recovery. in the present study, the recycling of aluminum electrolytic capacitors (AECs) from waste printed circuit boards (WPCBs) is focused on. First of all, AECs are disassembled from WPCBs by a self-designed machine; meanwhile, the disassembled AECs are subjected to an integrated process, involving heating treatment, crushing, sieving, and magnetic separating, to recover aluminum and iron; finally, the off-gas and residue generated during the aforementioned processes are analyzed to evaluate environmental risks. The results indicate that 96.52% and 98.68% of aluminum and iron, respectively, can be recovered from AECs under the optimal condition. The off-gas generated during the process is mainly composed of elements of C, H, and O, indicating that the off-gas is non-toxic and could be re-utilized as clean energy source. The residue according with toxicity characteristics leaching standard can be landfilled safely in sanitary landfill site. The present study provides an environmentally friendly and industrial application potential strategy to recycle AECs to promote e-waste recycling industry. Copyright © 2016 Elsevier B.V. All rights reserved.

Biomedical waste management in India: Critical appraisal

PubMed Central

Datta, Priya; Mohi, Gursimran Kaur; Chander, Jagdish

2018-01-01

The safe and sustainable management of biomedical waste (BMW) is social and legal responsibility of all people supporting and financing health-care activities. Effective BMW management (BMWM) is mandatory for healthy humans and cleaner environment. This article reviews the recent 2016 BMWM rules, practical problems for its effective implementation, the major drawback of conventional techniques, and the latest eco-friendly methods for BMW disposal. The new rules are meant to improve the segregation, transportation, and disposal methods, to decrease environmental pollution so as to change the dynamic of BMW disposal and treatment in India. For effective disposal of BMWM, there should be a collective teamwork with committed government support in terms of finance and infrastructure development, dedicated health-care workers and health-care facilities, continuous monitoring of BMW practices, tough legislature, and strong regulatory bodies. The basic principle of BMWM is segregation at source and waste reduction. Besides, a lot of research and development need to be in the field of developing environmental friendly medical devices and BMW disposal systems for a greener and cleaner environment. PMID:29403196

Staying Healthy and Safe at Work

MedlinePlus

... The Prematurity Campaign About us Annual report Our work Community impact Global programs Research Need help? Frequently ... safe at work Staying healthy and safe at work E-mail to a friend Please fill in ...

Acting green elicits a literal warm glow

NASA Astrophysics Data System (ADS)

Taufik, Danny; Bolderdijk, Jan Willem; Steg, Linda

2015-01-01

Environmental policies are often based on the assumption that people only act environmentally friendly if some extrinsic reward is implicated, usually money. We argue that people might also be motivated by intrinsic rewards: doing the right thing (such as acting environmentally friendly) elicits psychological rewards in the form of positive feelings, a phenomenon known as warm glow. Given the fact that people's psychological state may affect their thermal state, we expected that this warm glow could express itself quite literally: people who act environmentally friendly may perceive the temperature to be higher. In two studies, we found that people who learned they acted environmentally friendly perceived a higher temperature than people who learned they acted environmentally unfriendly. The underlying psychological mechanism pertains to the self-concept: learning you acted environmentally friendly signals to yourself that you are a good person. Together, our studies show that acting environmentally friendly can be psychologically rewarding, suggesting that appealing to intrinsic rewards can be an alternative way to encourage pro-environmental actions.

Bethune-Cookman University STEM Research Lab. DOE Renovation Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Herbert W.

DOE funding was used to renovate 4,500 square feet of aging laboratories and classrooms that support science, engineering, and mathematics disciplines (specifically environmental science, and computer engineering). The expansion of the labs was needed to support robotics and environmental science research, and to better accommodate a wide variety of teaching situations. The renovated space includes a robotics laboratory, two multi-use labs, safe spaces for the storage of instrumentation, modern ventilation equipment, and other “smart” learning venues. The renovated areas feature technologies that are environmentally friendly with reduced energy costs. A campus showcase, the laboratories are a reflection of the University’smore » commitment to the environment and research as a tool for teaching. As anticipated, the labs facilitate the exploration of emerging technologies that are compatible with local and regional economic plans.« less

"My husband usually makes those decisions": gender, behavior, and attitudes toward the marine environment.

PubMed

Wester, Misse; Eklund, Britta

2011-07-01

Human behavior impacts the environment we live in. In order to better understand how one group, boat owners, in three Nordic countries adjacent to the Baltic Sea; Sweden, Finland and Denmark, viewed the relationship between the marine environment, leisure boats and issues of responsibility, a survey study was conducted (n = 1701). The results show that there are differences between gender in many areas and those women in general are more environmentally friendly than men in their views and behavior. Men and women seek information about boating by different channels and this knowledge may be used in future information campaigns. Both men and women ranked boat owners as having the lowest impact on the marine environment and perceived these to be responsible for addressing environmental issues caused by leisure boat activities. The results also show that it is important to prove the effectiveness of an environmentally safe product since this factor is ranked higher than price when considering buying a product. The results suggest that once environmentally friendly behavior is established, such as recycling, this behavior continues. One implication of this study is that small changes in human behavior are seen as acceptable but larger commitments are more difficult to achieve. If individuals do not feel responsible for causing environmental damage, this aspect needs to be addressed in information aimed at this group. Novel approaches on framing the information and new ways of disseminating information are needed.

OverView of Space Applications for Environment (SAFE) initiative

NASA Astrophysics Data System (ADS)

Hamamoto, Ko; Fukuda, Toru; Tajima, Yoshimitsu; Takeuchi, Wataru; Sobue, Shinichi; Nukui, Tomoyuki

2014-06-01

Climate change and human activities have a direc or indirect influence on the acceleration of environmental problems and natural hazards such as forest fires, draughts and floods in the Asia-Pacific countries. Satellite technology has become one of the key information sources in assessment, monitoring and mitigation of these disasters and related phenomenon. However, there are still gaps between science and application of satellite technology in real-world usage. Asia-Pacific Regional Space Agency Forum (APRSAF) recommended to initiate the Space Applications for Environment (SAFE) proposal providing opportunity to potential user agencies in the Asia Pacific region to develop prototype applications of satellite technology for number of key issues including forest resources management, coastal monitoring and management, agriculture and food security, water resource management and development user-friendly tools for application of satellite technology. This paper describes the overview of SAFE initiative and outcomes of two selected prototypes; agricultural drought monitoring in Indonesia and coastal management in Sri Lanka, as well as the current status of on-going prototypes.

Green, Yellow, and Red risk perception in everyday life - a communication tool.

PubMed

Stensgaard, A; DunnGalvin, A; Nielsen, D; Munch, M; Bindslev-Jensen, C

2017-07-01

Adolescents have the highest risk for food allergy-related fatalities. Our main aim was to investigate the level of risk in everyday social situations as perceived by adolescents/young adults with peanut allergy, their families, and their friends. The web-based 'Colours Of Risks' (COR) questionnaire was completed by 70 patients (aged 12-23 years), 103 mothers and fathers, 31 siblings (aged 12-26 years), and 42 friends (aged 12-24 years). COR deals with six main contexts (home, school/university, work, visiting/social activities, special occasions/parties, and vacations), each with 1-12 items. Response categories are green (I feel safe), yellow (I feel uncertain), or red (I feel everything is risky). There was a high level of agreement between participants in defining situations as safe, uncertain, or risky, but female patients and mothers rated fewer situations as safe compared to male patients and fathers. Being with close friends and family, and attending planned parties without alcohol were perceived as situations of low risk. While 94% of patients took an epinephrine auto-injector (EAI) into risky situations, only 65% took it into safe situations. In contrast to the close family, 31% of the friends did not know the patient had an EAI, and fewer knew how to administer the EAI. Young adults with peanut allergy face challenges when moving from the safe home with ready assistance if needed, to independence with unpredictable surroundings and less certain help. Perceived 'safe' situations may in fact be the riskiest, as patients often do not take the EAI with them. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Feasibility study for an innovative industrial red mud utilisation method.

PubMed

Kounalakis, Petros; Aravossis, Konstantinos; Karayianni, ChS

2016-02-01

Red mud is a high volume industrial waste, and its management poses a unique challenge. For the utilisation of red mud, an economical, energy saving, environmental friendly and widely applicable method has been found. The proposed novel method is purely chemical, and achieves the recovery of all the oxides contained in red mud totally and transforms them into high value added products. The present work shows that an investment in an industrial plant, treating red mud and turning a toxic industrial waste in commercial products, is safe and viable. © The Author(s) 2015.

77 FR 31147 - National Safe Boating Week, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... Safe Boating Week, 2012 By the President of the United States of America A Proclamation For generations... friends and family a well- loved tradition. During National Safe Boating Week, we renew our commitment to... mark National Safe Boating Week, let us reflect on that important mission and resolve to do our part to...

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers.

PubMed

Ali, Akbar; Ahmed, Shakeel

2018-06-26

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

NaNO3/NaCl Oxidant and Polyethylene Glycol (PEG) Capped Gold Nanoparticles (AuNPs) as a Novel Green Route for AuNPs Detection in Electrochemical Biosensors.

PubMed

López-Marzo, Adaris M; Hoyos-de-la-Torre, Raquel; Baldrich, Eva

2018-03-20

Gold nanoparticles (AuNPs) have been exploited as signal-producing tags in electrochemical biosensors. However, the electrochemical detection of AuNPs is currently performed using corrosive acid solutions, which may raise health and environmental concerns. Here, oxidant salts, and specifically the environmentally friendly and occupational safe NaNO 3 /NaCl mixture, have been evaluated for the first time as potential alternatives to the acid solutions traditionally used for AuNPs electrooxidation. In addition, a new strategy to improve the sensitivity of the biosensor through PEG-based ligand exchange to produce less compact and easier to oxidize AuNPs immunoconjugates is presented too. As we show, the electrochemical immunosensor using NaNO 3 /NaCl measurement solution for AuNPs electrooxidation and detection, coupled to the employment of PEG-capped nanoimmunoconjugates, produced results comparable to classical HCl detection. The procedure developed was next tested for human matrix metallopeptidase-9 (hMMP9) analysis, exhibiting a 0.18-23 ng/mL linear range, a detection limit of 0.06 ng/mL, and recoveries between 95 and 105% in spiked human plasma. These results show that the procedure developed is applicable to the analysis of protein biomarkers in blood plasma and could contribute to the development of more environmentally friendly AuNP-based electrochemical biosensors.

Heroin and Pregnancy

MedlinePlus

... Home > Pregnancy > Is it safe? > Heroin and pregnancy Heroin and pregnancy E-mail to a friend Please ... way that’s safe for your baby. What is heroin? Heroin (also called smack or junk) is an ...

Sustainable engineered processes to mitigate the global arsenic crisis in drinking water: challenges and progress.

PubMed

Sarkar, Sudipta; Greenleaf, John E; Gupta, Anirban; Uy, Davin; Sengupta, Arup K

2012-01-01

Millions of people around the world are currently living under the threat of developing serious health problems owing to ingestion of dangerous concentrations of arsenic through their drinking water. In many places, treatment of arsenic-contaminated water is an urgent necessity owing to a lack of safe alternative sources. Sustainable production of arsenic-safe water from an arsenic-contaminated raw water source is currently a challenge. Despite the successful development in the laboratory of technologies for arsenic remediation, few have been successful in the field. A sustainable arsenic-remediation technology should be robust, composed of local resources, and user-friendly as well as must attach special consideration to the social, economic, cultural, traditional, and environmental aspects of the target community. One such technology is in operation on the Indian subcontinent. Wide-scale replication of this technology with adequate improvisation can solve the arsenic crisis prevalent in the developing world.

Nanoparticle-plant interaction: Implications in energy, environment, and agriculture.

PubMed

Rai, Prabhat Kumar; Kumar, Vanish; Lee, SangSoo; Raza, Nadeem; Kim, Ki-Hyun; Ok, Yong Sik; Tsang, Daniel C W

2018-06-14

In the recent techno-scientific revolution, nanotechnology has gained popularity at a rapid pace in different sectors and disciplines, specifically environmental, sensing, bioenergy, and agricultural systems. Controlled, easy, economical, and safe synthesis of nanomaterials is desired for the development of new-age nanotechnology. In general, nanomaterial synthesis techniques, such as chemical synthesis, are not completely safe or environmentally friendly due to harmful chemicals used or to toxic by-products produced. Moreover, a few nanomaterials are present as by-product during washing process, which may accumulate in water, air, and soil system to pose serious threats to plants, animals, and microbes. In contrast, using plants for nanomaterial (especially nanoparticle) synthesis has proven to be environmentally safe and economical. The role of plants as a source of nanoparticles is also likely to expand the number of options for sustainable green renewable energy, especially in biorefineries. Despite several advantages of nanotechnology, the nano-revolution has aroused concerns in terms of the fate of nanoparticles in the environment because of the potential health impacts caused by nanotoxicity upon their release. In the present panoramic review, we discuss the possibility that a multitudinous array of nanoparticles may find applications convergent with human welfare based on the synthesis of diverse nanoparticles from plants and their extracts. The significance of plant-nanoparticle interactions has been elucidated further for nanoparticle synthesis, applications of nanoparticles, and the disadvantages of using plants for synthesizing nanoparticles. Finally, we discuss future prospects of plant-nanoparticle interactions in relation to the environment, energy, and agriculture with implications in nanotechnology. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Behavior of Environmentally Friendly Corrosion Preventative Compounds in an Aggressive Coastal Marine Environment

NASA Technical Reports Server (NTRS)

Montgomery, Eliza L.; Calle, Luz Marina; Curran Jerome C.; Kolody, Mark R.

2013-01-01

The shift to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. The CPCs, while a temporary protective coating, must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different soft film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. The CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing . The initial results for the fifteen CPC systems are reported : Key words: corrosion preventive compound, CPC, spaceport, environmentally friendly, atmospheric exposure, marine, carbon steel, aluminum alloy, galvanic corrosion, wire on bolt.

A Survey on Turkish Elementary School Students' Environmental Friendly Behaviours and Associated Variables

ERIC Educational Resources Information Center

Alp, Elvan; Ertepinar, Hamide; Tekkaya, Ceren; Yilmaz, Ayhan

2008-01-01

This study investigated elementary school students' environmental knowledge and attitudes, the effects of sociodemographic variables on environmental knowledge and attitudes, and how self-reported environmentally friendly behaviour is related to environmental knowledge, behavioural intentions, environmental affects, and the students' locus of…

Eco-friendly plasmonic sensors: using the photothermal effect to prepare metal nanoparticle-containing test papers for highly sensitive colorimetric detection.

PubMed

Tseng, Shao-Chin; Yu, Chen-Chieh; Wan, Dehui; Chen, Hsuen-Li; Wang, Lon Alex; Wu, Ming-Chung; Su, Wei-Fang; Han, Hsieh-Cheng; Chen, Li-Chyong

2012-06-05

Convenient, rapid, and accurate detection of chemical and biomolecules would be a great benefit to medical, pharmaceutical, and environmental sciences. Many chemical and biosensors based on metal nanoparticles (NPs) have been developed. However, as a result of the inconvenience and complexity of most of the current preparation techniques, surface plasmon-based test papers are not as common as, for example, litmus paper, which finds daily use. In this paper, we propose a convenient and practical technique, based on the photothermal effect, to fabricate the plasmonic test paper. This technique is superior to other reported methods for its rapid fabrication time (a few seconds), large-area throughput, selectivity in the positioning of the NPs, and the capability of preparing NP arrays in high density on various paper substrates. In addition to their low cost, portability, flexibility, and biodegradability, plasmonic test paper can be burned after detecting contagious biomolecules, making them safe and eco-friendly.

Status analysis and vision on urban landscape planning-take Chengdu city as an example

NASA Astrophysics Data System (ADS)

Liu, Hanyun

2017-10-01

Appropriate urban planning can forge a proper and safe city framework so as to achieve safety, health, convenience and comfort. A personalized urban planning is a name card of city development which can demonstrate the unique culture and function of a city. This essay concludes the concept and principles of urban landscape planning; takes the status of landscape planning in Chengdu City as an object, concludes its merits and demerits and offers solutions to the weak points; looks into the future of urban landscape planning so as to offer theoretical support for the development of an ecologically and environmentally friendly low-carbon city.

78 FR 12304 - Lock+ Hydro Friends Fund XLII, LLC; Notice of Application Ready for Environmental Analysis and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... Friends Fund XLII, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...+ Hydro Friends Fund XLII, LLC. e. Name of Project: Braddock Locks and Dam Hydroelectric Project. f...\\ Hydro Friends Fund XLII, LLC, c/o Hydro Green Energy, LLC, 900 Oakmont Lane, Suite 310, Westmont, IL...

How Safe Are Kid-Safe Search Engines?

ERIC Educational Resources Information Center

Masterson-Krum, Hope

2001-01-01

Examines search tools available to elementary and secondary school students, both human-compiled and crawler-based, to help direct them to age-appropriate Web sites; analyzes the procedures of search engines labeled family-friendly or kid safe that use filters; and tests the effectiveness of these services to students in school libraries. (LRW)

Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

ERIC Educational Resources Information Center

Candan, Sevcan; Erten, Sinan

2015-01-01

In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

77 FR 68765 - Lock+ Hydro Friends Fund XLII, LLC; Notice of Scoping Meetings and Environmental Site Review and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... Friends Fund XLII, LLC; Notice of Scoping Meetings and Environmental Site Review and Soliciting Scoping.... c. Date filed: September 17, 2012. d. Applicant: Lock+ Hydro Friends Fund XLII, LLC. e. Name of...)-825(r). h. Applicant Contact: Mr. Mark R. Stover, Lock+\\TM\\ Hydro Friends Fund XLII, LLC, c/o Hydro...

Review on the Extraction Methods of Crude oil from all Generation Biofuels in last few Decades

NASA Astrophysics Data System (ADS)

Bhargavi, G.; Nageswara Rao, P.; Renganathan, S.

2018-03-01

The ever growing demand for the energy fuels, economy of oil, depletion of energy resources and environmental protection are the inevitable challenges required to be solved meticulously in future decades in order to sustain the life of humans and other creatures. Switching to alternate fuels that are renewable, biodegradable, economically and environmentally friendly can quench the minimum thirst of fuel demands, in addition to mitigation of climate changes. At this moment, production of biofuels has got prominence. The term biofuels broadly refer to the fuels derived from living matter either animals or plants. Among the competent biofuels, biodiesel is one of the promising alternates for diesel engines. Biodiesel is renewable, environmentally friendly, safe to use with wide applications and biodegradable. Due to which, it has become a major focus of intensive global research and development of alternate energy. The present review has been focused specifically on biodiesel. Concerning to the biodiesel production, the major steps includes lipid extraction followed by esterification/transesterification. For the extraction of lipids, several extraction techniques have been put forward irrespective of the generations and feed stocks used. This review provides theoretical background on the two major extraction methods, mechanical and chemical extraction methods. The practical issues of each extraction method such as efficiency of extraction, extraction time, oil sources and its pros and cons are discussed. It is conceived that congregating information on oil extraction methods may helpful in further research advancements to ease biofuel production.

NOAA Marine and Arctic Monitoring Using UASs

NASA Astrophysics Data System (ADS)

Jacobs, T.; Coffey, J. J.; Hood, R. E.; Hall, P.; Adler, J.

2014-12-01

Unmanned systems have the potential to efficiently, effectively, economically and safely bridging critical observation requirements in an environmentally friendly manner. As the United States' Marine and Arctic areas of interest expand and include hard-to-reach regions of the Earth (such as the Arctic and remote oceanic areas) optimizing unmanned capabilities will be needed to advance the United States' science, technology and security efforts. Through increased multi-mission and multi-agency operations using improved inter-operable and autonomous unmanned systems, the research and operations communities will better collect environmental intelligence and better protect our Country against hazardous weather, environmental, marine and polar hazards. This presentation will examine NOAA's Marine and Arctic Monitoring UAS strategies which includes developing a coordinated effort to maximize the efficiency and capabilities of unmanned systems across the federal government and research partners. Numerous intra- and inter-agency operational demonstrations and assessments have been made to verify and validated these strategies. The presentation will also discuss the requisite sUAS capabilities and our experience in using them.

Environmentally Friendly Corrosion Preventative Compounds for Ground Support Structures

NASA Technical Reports Server (NTRS)

Montgomery Eliza L.; Calle, Luz, Marina; Curran, Jerome P.; Kolody, Mark R.

2013-01-01

The need to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. CPCs are used as temporary protective coatings and must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different oily film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing. The results for the fifteen CPC systems are presented in this paper.

Environmentally friendly corrosion preventive compounds for ground support structures

NASA Astrophysics Data System (ADS)

Montgomery, Eliza; Curran, Jerome; Calle, Luz Marina; Kolody, Mark

The need to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based corrosion preventive compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. CPCs are used as temporary protective coatings and must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different oily film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing. The results for the fifteen CPC systems are presented in this paper.

The Effects of Mothers' Educational Levels on University Students' Environmental Protection Commitments and Environmental Behaviors

ERIC Educational Resources Information Center

Saraçli, Sinan; Yilmaz, Veysel; Arslan, Talha

2014-01-01

Problem Statement: The damage caused by recent environmental problems has led to increased environmental concerns and the development of environment-friendly consumption behaviours in almost every society. Environment-friendly consumption involves the consideration of environmental benefits by minimizing any damage done to the environment at all…

"Green" electronics: biodegradable and biocompatible materials and devices for sustainable future.

PubMed

Irimia-Vladu, Mihai

2014-01-21

"Green" electronics represents not only a novel scientific term but also an emerging area of research aimed at identifying compounds of natural origin and establishing economically efficient routes for the production of synthetic materials that have applicability in environmentally safe (biodegradable) and/or biocompatible devices. The ultimate goal of this research is to create paths for the production of human- and environmentally friendly electronics in general and the integration of such electronic circuits with living tissue in particular. Researching into the emerging class of "green" electronics may help fulfill not only the original promise of organic electronics that is to deliver low-cost and energy efficient materials and devices but also achieve unimaginable functionalities for electronics, for example benign integration into life and environment. This Review will highlight recent research advancements in this emerging group of materials and their integration in unconventional organic electronic devices.

Food Labeling and Consumer Associations with Health, Safety, and Environment.

PubMed

Sax, Joanna K; Doran, Neal

2016-12-01

The food supply is complicated and consumers are increasingly calling for labeling on food to be more informative. In particular, consumers are asking for the labeling of food derived from genetically modified organisms (GMO) based on health, safety, and environmental concerns. At issue is whether the labels that are sought would accurately provide the information desired. The present study examined consumer (n = 181) perceptions of health, safety and the environment for foods labeled organic, natural, fat free or low fat, GMO, or non-GMO. Findings indicated that respondents consistently believed that foods labeled GMO are less healthy, safe and environmentally-friendly compared to all other labels (ps < .05). These results suggest that labels mean something to consumers, but that a disconnect may exist between the meaning associated with the label and the scientific consensus for GMO food. These findings may provide insight for the development of labels that provide information that consumers seek.

Effectiveness of silica based sol-gel microencapsulation method for odorants and flavors leading to sustainable environment

PubMed Central

Ashraf, Muhammad Aqeel; Khan, Aysha Masood; Ahmad, Mushtaq; Sarfraz, Maliha

2015-01-01

Microencapsulation has become a hot topic in chemical research. Technology mainly used for control release and protection purposes. The sol-gel micro encapsulation approach for fragrance and aroma in porous silica-based materials leads to sustainable odorant and flavored materials with novel and unique beneficial properties. Sol-gel encapsulation of silica based micro particles considered economically cheap as capital investment in manufacturing is very low and environmentally friendly. Amorphous sol-gel SiO2 is non-toxic and safe, whereas the sol-gel entrapment of delicate chemicals in its inner pores results in pronounced chemical and physical stabilization of the entrapped active agents, thereby broadening the practical utilization of chemically unstable essential oils (EOs). Reviewing progress in the fabrication of diverse odorant and flavored sol-gels, shows us how different synthetic strategies are appropriate for practical application with important health and environmental benefits. PMID:26322304

Effectiveness of silica based sol-gel microencapsulation method for odorants and flavors leading to sustainable environment.

PubMed

Ashraf, Muhammad Aqeel; Khan, Aysha Masood; Ahmad, Mushtaq; Sarfraz, Maliha

2015-01-01

Microencapsulation has become a hot topic in chemical research. Technology mainly used for control release and protection purposes. The sol-gel micro encapsulation approach for fragrance and aroma in porous silica-based materials leads to sustainable odorant and flavored materials with novel and unique beneficial properties. Sol-gel encapsulation of silica based micro particles considered economically cheap as capital investment in manufacturing is very low and environmentally friendly. Amorphous sol-gel SiO2 is non-toxic and safe, whereas the sol-gel entrapment of delicate chemicals in its inner pores results in pronounced chemical and physical stabilization of the entrapped active agents, thereby broadening the practical utilization of chemically unstable essential oils (EOs). Reviewing progress in the fabrication of diverse odorant and flavored sol-gels, shows us how different synthetic strategies are appropriate for practical application with important health and environmental benefits.

Environmentally friendly paint and varnish additives based on isobutyrate aldehyde condensation products

NASA Astrophysics Data System (ADS)

Guziałowska-Tic, Joanna; Jan Tic, Wilhelm

2017-10-01

The demand for exploitation of new plasticizers and coalescents to be used for production of water dispersion adhesives based on poli(vinyl acetate), turned to be recently of particular significance because the use of all kind of toxic phthalates was banned and certain restrictions were made to use glycol derivatives classified as volatile organic compounds. An alternative for toxic plasticizers used for production of adhesives is hydroxyester (HE-1) obtained from isobutanal during the process of aldol condensation under subsequent Cannizaro and Tischenko reactions. The paper presents selected results of ecotoxicological tests on the environmental impact of hydroxyester HE-1. It was found that the substance is biodegradable and has no negative impact on algae growth rate, however it may inhibit algae biomass growth. The results of Daphnia immobilization test shows that the substance is safe for the aquatic environment. Whereas, at higher concentrations, hydroxyester HE-1 may exhibit acute toxicity to rainbow trout.

Marine microorganisms as potential biofactories for synthesis of metallic nanoparticles.

PubMed

Manivasagan, Panchanathan; Nam, Seung Yun; Oh, Junghwan

2016-11-01

The use of marine microorganisms as potential biofactories for green synthesis of metallic nanoparticles is a relatively new field of research with considerable prospects. This method is eco-friendly, time saving, and inexpensive and can be easily scaled up for large-scale synthesis. The increasing need to develop simple, nontoxic, clean, and environmentally safe production methods for nanoparticles and to decrease environmental impact, minimize waste, and increase energy productivity has become important in this field. Marine microorganisms are tiny organisms that live in marine ecosystems and account for >98% of biomass of the world's ocean. Marine microorganisms synthesize metallic nanoparticles either intracellularly or extracellularly. Marine microbially-produced metallic nanoparticles have received considerable attention in recent years because of their expected impact on various applications such as medicine, energy, electronic, and space industries. The present review discusses marine microorganisms as potential biofactories for the green synthesis of metallic nanoparticles and their potential applications.

Child-Friendly Cities: A Place for Active Citizenship in Geographical and Environmental Education

ERIC Educational Resources Information Center

Wilks, Judith

2010-01-01

This research was designed to investigate innovative practices associated with child-friendly cities initiatives in the United Kingdom and Italy and how civics and citizenship initiatives are being applied into practical programmes of exploration and learning in geography and environmental education. The Child-Friendly Cities Initiative (CFCI) of…

Environmental Friendly Coatings and Corrosion Prevention For Flight Hardware Project

NASA Technical Reports Server (NTRS)

Calle, Luz

2014-01-01

Identify, test and develop qualification criteria for environmentally friendly corrosion protective coatings and corrosion preventative compounds (CPC's) for flight hardware an ground support equipment.

The Importance of Understanding Culture When Improving Education: Learning from Cambodia

ERIC Educational Resources Information Center

Berkvens, Jan B. Y.

2017-01-01

Following Education for All, initiatives like child-friendly schools initiative, are rolled out in many countries, including Cambodia. The child-friendly schools initiative is addressing general and local needs of children in schools, like a safe environment, well-trained teachers and the provision of teaching and materials. But there is also a…

Comparison of the microbiological quality of environmentally friendly and conventionally grown vegetables sold at retail markets in Korea.

PubMed

Ryu, Jee-Hoon; Kim, Minju; Kim, Eun-Gyeong; Beuchat, Larry R; Kim, Hoikyung

2014-09-01

Fresh produce is usually eaten raw without cooking or heating, which may increase the probability of foodborne infection. The microbiological quality of 11 types of fresh, raw vegetables (romaine lettuce, sesame leaves, crown daisy, garlic chives, iceberg lettuce, cabbage, broccoli, leek, chili pepper, capsicum, and zucchini) purchased at retail markets in Iksan, Korea as affected by cultivation method (environmentally friendly vegetables [organic, pesticide-free, and low-pesticide vegetables] and conventionally grown vegetables) and harvest season was determined. Escherichia coli O157:H7 and Salmonella were not detected in all samples of vegetables tested. Aerobic mesophiles (>6 log cfu/g) were detected in environmentally friendly romaine lettuce and crown daisy and environmentally friendly and conventionally grown garlic chives, which also contained coliforms (>3 log cfu/g). Sesame leaf and crown daisy (regardless of cultivation method), as well as conventionally grown romaine lettuce and leek, contained >1 log cfu/g of E. coli. The overall microbiological quality of environmentally friendly and conventionally grown vegetables was not significantly different (P > 0.05). However, there were seasonal effects on populations of coliforms and generic E. coli on vegetables. The greatest numbers of microorganisms were isolated from environmentally friendly or conventionally grown vegetables purchased in winter. The vegetables, regardless of cultivation method or season, should be subjected to appropriate antimicrobial treatment to enhance their microbial safety. © 2014 Institute of Food Technologists®

Synthetic Fuel

ScienceCinema

Idaho National Laboratory - Steve Herring, Jim O'Brien, Carl Stoots

2017-12-09

Two global energy priorities today are finding environmentally friendly alternatives to fossil fuels, and reducing greenhouse gass Two global energy priorities today are finding environmentally friendly alternatives to fossil fuels, and reducing greenhous

Perceived safety and teen risk taking in online chat sites.

PubMed

McCarty, Cheryl; Prawitz, Aimee D; Derscheid, Linda E; Montgomery, Bette

2011-03-01

Framed by theories of adolescent development, this study explored relationships among adolescents' perceptions of chat-site safety, time spent chatting, and risky online behaviors. Tenth graders (N = 139) in rural Midwestern U.S. schools completed surveys. Factor analysis produced three factors each for perception of safety and risk-taking behaviors. Regression analyses revealed that perception of safety factors were useful in predicting online risk-taking behaviors. Teens with more social discomfort and those who thought it was safe to reveal personal information and trust chat-site "friends" were more likely to take risks. As time spent in chat sites increased, so did risk-taking behaviors. Implications for educators and parents are discussed, such as initiation of conversations about safe Internet use, parental participation in chat sites as teens' invited "friends," and school programs to teach safe online practices.

Biodegradation of bispyribac sodium by a novel bacterial consortium BDAM: Optimization of degradation conditions using response surface methodology.

PubMed

Ahmad, Fiaz; Anwar, Samina; Firdous, Sadiqa; Da-Chuan, Yin; Iqbal, Samina

2018-05-05

Bispyribac sodium (BS), is a selective, systemic and post emergent herbicide used to eradicate grasses and broad leaf weeds. Extensive use of this herbicide has engendered serious environmental concerns. Hence it is important to develop strategies for bioremediation of BS in a cost effective and environment friendly way. In this study a bacterial consortium named BDAM, comprising three novel isolates Achromobacter xylosoxidans (BD1), Achromobacter pulmonis (BA2), and Ochrobactrum intermedium (BM2), was developed by virtue of its potential for degradation of BS. Different culture conditions (temperature, pH and inoculum size) were optimized for degradation of BS by the consortium BDAM and the mutual interactions of these parameters were analysed using a 2 3 full factorial central composite design (CCD) based on Response Surface Methodology (RSM). The optimal values for temperature, pH and inoculum size were found to be 40 °C, 8 and 0.4 g/L respectively to achieve maximum degradation of BS (85.6%). Moreover, the interactive effects of these parameters were investigated using three dimensional surface plots in terms of maximum fitness function. Importantly, it was concluded that the newly developed consortium is a potential candidate for biodegradation of BS in a safe, cost-effective and environmentally friendly manner. Copyright © 2017. Published by Elsevier B.V.

Biotechnological advances and perspectives of gamma-aminobutyric acid production.

PubMed

Xu, Ning; Wei, Liang; Liu, Jun

2017-03-01

Gamma-aminobutyric acid (GABA) is a four-carbon non-protein amino acid that is widely distributed among various organisms. Since GABA has several well-known physiological functions, such as mediating neurotransmission and hypotensive activity, as well as having tranquilizer effects, it is commonly used as a bioactive compound in the food, pharmaceutical and feed industries. The major pathway of GABA biosynthesis is the irreversible decarboxylation of L-glutamate catalyzed by glutamate decarboxylase (GAD), which develops a safe, sustainable and environmentally friendly alternative in comparison with traditional chemical synthesis methods. To date, several microorganisms have been successfully engineered for high-level GABA biosynthesis by overexpressing exogenous GADs. However, the activity of almost all reported microbial GADs sharply decreases at physiological near-neutral pH, which in turn provokes negative effects on the application of these GADs in the recombinant strains for GABA production. Therefore, ongoing efforts in the molecular evolution of GADs, in combination with high-throughput screening and metabolic engineering of particular producer strains, offer fascinating new prospects for effective, environmentally friendly and economically viable GABA biosynthesis. In this review, we briefly introduce the applications in which GABA is used, and summarize the most important methods associated with GABA production. The major achievements and present challenges in the biotechnological synthesis of GABA, focusing on screening and enzyme engineering of GADs, as well as metabolic engineering strategy for one-step GABA biosynthesis, will be extensively discussed.

Environment and human friendly colored materials prepared using black and white components.

PubMed

Takeoka, Yukikazu

2018-05-10

Our lives in the present age are full of colorful items. However, when many coloring materials cannot be used due to environmental concerns, this colorful life that has been constructed will be diminished. Maintaining our rich lifestyle necessitates the development of technologies that can make safe and secure color materials from materials with less burden on people and the environment. Herein, the author reveals that structural colored materials with little angle dependence can be prepared using various materials with short-range order in the refractive index, which is comparable to the wavelength of visible light, and with the aid of a black substance. This approach enables the preparation of colorful materials from materials that have a low environmental burden and are non-toxic to living things; examples of such materials include silica, carbon black, and iron oxide. If we can achieve mechanical stabilization and hue stabilization of these coloring materials, we can develop new green pigments with low toxicity, good color development, and high durability. The use of conventional angular-dependent structural colored materials has been limited. However, structural colored materials with no angle dependence, such as those prepared by the author, can be used in fields where pigments have traditionally been used. For example, they could be used in coating materials for automobiles and buildings, and in pigments used by artists. Environmentally friendly green color materials are expected to promote sustainable development. In this review, I will describe how to prepare structural colored materials with less angle dependency using white and black substances previously reported by the author.

Highway corridor responsibility

Treesearch

Bonnie L. Harper-Lore

1998-01-01

As highways cross the nation they provide safe travel for the vacationers, commuters, truckers, the military, farmers, congressmen, our families, and friends. Highway corridors provide safe passage for many plant invaders as well. Highway vegetation managers manage millions of acres of rights-of-way that cross your land. It is imperative that we understand each other...

Adherence to National Asthma Education and Prevention Program's "How Asthma-Friendly Is Your School?" Recommendations

ERIC Educational Resources Information Center

Jones, Sherry Everett; Wheeler, Lani S.; Smith, Alisa M.; McManus, Tim

2009-01-01

School health policies and programs provide the framework for a safe and supportive environment for students with asthma. School Health Policies and Programs Study 2006 data were examined to assess whether schools nationwide have policies and programs consistent with the "How Asthma-Friendly Is Your School?" checklist from the National Asthma…

Keeping Friends Safe: A Prospective Study Examining Early Adolescent's Confidence and Support Networks

ERIC Educational Resources Information Center

Buckley, L.; Chapman, R. L.; Sheehan, M.; Cunningham, L.

2012-01-01

There is a continued need to consider ways to prevent early adolescent engagement in a variety of harmful risk-taking behaviours for example, violence, road-related risks and alcohol use. The current prospective study examined adolescents' reports of intervening to try and stop friends' engagement in such behaviours among 207 early adolescents…

Development of environmentally friendly messages to promote longer durations of breastfeeding for already breastfeeding mothers.

PubMed

Hamilton, Amanda E

2015-01-01

Durations of breastfeeding activity in the United States fall short of established recommendations by leading public health institutions. In response to this problem, this study sought to develop environmentally friendly messages to promote continued breastfeeding for moms already breastfeeding in order to help them reach recommended breastfeeding durations. Messages were successfully cultivated to encourage moms already breastfeeding to meet recommended breastfeeding durations. In addition, this study cultivated strategies by which to use environmentally friendly messages to urge mothers who still need to decide whether to breastfeed or formula feed to breastfeed, although this was not the purpose of the research. Avenues for future communication-based breastfeeding research were also elucidated. The Elaboration Likelihood Model serves as useful theory to assess the role of environmentally friendly messages in the promotion of continued breastfeeding.

DECO FRECASE (drywall eco-friendly from eggshell and cane bagasse) as an innovation of eco-friendly interior construction

NASA Astrophysics Data System (ADS)

Imron, M. A.; Ahkam, D. N. I.; Hidayat, A. W.

2017-12-01

The number of factories and home industries, both upper and lower middle class certainly adds waste generated, resulting in environmental pollution. The development of buildings is one of the largest contributors to global warming. For that, it takes technological innovations that lead to the criteria of green building. The application of green material is important aspects of environmentally friendly development, the selection of materials on the green material criteria of both roles should be applied continuously in order to realize the environmental sustainability of the material. Utilization Waste eggshell and bagasse which is a community waste, has the potential to become innovative environmentally friendly building materials. The eggshell is composed of 94% calcium carbonate, 1% magnesium carbonate, 1% calcium phosphate, and 4% organic material, especially protein, while the bagasse has a high content of silica (SiO2). In this study, the compounds are used as raw material for making alternative drywall in the form of DECO FRECASE. DECO FRECASE is an innovation of environmentally friendly building materials as an interior wall construction. Through DECO FRECASE, it is expected that building material innovation in Indonesia can be improved and of course environmental problems can be minimized by utilizing it as raw material for building construction.

A High-Performance and Recyclable Al-Air Coin Cell Based on Eco-Friendly Chitosan Hydrogel Membranes.

PubMed

Liu, Yisi; Sun, Qian; Yang, Xiaofei; Liang, Jianneng; Wang, Biqiong; Koo, Alicia; Li, Ruying; Li, Jie; Sun, Xueliang

2018-05-18

Aluminum-air batteries are a promising power supply for electronics due to its low cost and high energy density. However, portable coin-type Al-air batteries operating under ambient air condition for small electronic appliances have rarely been reported. Herein, coin cell-type Al-air batteries using cost-effective and eco-friendly chitosan hydrogel membranes modified by SiO2, SnO2, and ZnO have been prepared and assembled. The Al-air coin cell employing chitosan hydrogel membrane containing 10 wt.% SiO2 as a separator exhibits better discharge performance with a higher flat voltage plateau, longer discharge duration, and higher power density than the cells using a chitosan hydrogel membrane containing SnO2 or ZnO. Moreover, we also demonstrate that the presented Al-air coin cell can be recycled by a series of eco-friendly procedures using food grade ingredients, resulting in recycled products that are environmentally safe and ready for reuse. The Al-air coin cell adopting a recycled cathode from a fully discharged Al-air coin cell using the above-mentioned procedure has shown comparable performance to cells assembled with a new cathode. With these merits of enhanced electrochemical performance and recyclability, this new Al-air coin cell with modified chitosan hydrogel membrane can find wide applications for powering portable and small-size electronics.

Environmentally friendly preparation of metal nanoparticles

EPA Science Inventory

The book chapter summarizes the “state of the art” in the exploitation of various environmentally-friendly synthesis approaches, reaction precursors and conditions to manufacture metal and metal oxide nanoparticles for a vast variety of purposes.

Synthesis and characterization of intercalated polyaniline-clay nanocomposite using supercritical CO2

NASA Astrophysics Data System (ADS)

Abdelraheem, A.; El-Shazly, A. H.; Elkady, M. F.

2018-05-01

Lately, supercritical CO2 (SCCO2) have been getting great interest. It can be used in numerous applications because it is environmentally friendly, safe, comparatively low cost, and nonflammable. One of its applications is being a solvent in the synthesis of polymeric-clay nanocomposite. In this paper, intercalated polyaniline-clay nanocomposite (PANC) was prepared using SCCO2. The intercalation structure of polyaniline chains between clay layers was verified by various characterization techniques. Scanning electron microscope and transmission electron microscope (SEM-TEM) were used to show the morphology of the synthesized nanocomposite. The molecular structure of PANC nanocomposite was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The BET surface area and the conductivity of the nanocomposite were determined.

Tap versus bottled water consumption: The influence of social norms, affect and image on consumer choice.

PubMed

Etale, Anita; Jobin, Marilou; Siegrist, Michael

2018-02-01

What drives consumers to choose bottled water instead of tap water where the latter is safe, accessible, costs far less, and in spite of its environmental impacts? This research investigates the influence of hitherto unexplored psychological drivers in an attempt to generate a more holistic understanding of the phenomenon, and strategies for designing more effective consumption reduction campaigns. Using data from an internet survey of Swiss and German respondents (N = 849) we investigated the role of, social norms, affect and image on water consumption. Results suggest that these psychological factors play a role in water consumption choice. Convenience was the only contextual predictor - the inconvenience of transporting bottled water has a negative effect on its consumption, and a positive effect on tap water consumption. Although concern about the effect of bottled water on the environment was not a significant predictor of tap water consumption, we found that for some people, a link exists between environmental concern and consumption choice. Ways through which consumers may be more effectively influenced towards environmentally-friendly consumption are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Teaching Ecology to Children of Preschool Education to Instill Environmentally Friendly Behaviour

ERIC Educational Resources Information Center

Ferreira, Maria Eduarda; Cruz, Catarina; Pitarma, Rui

2016-01-01

This qualitative study analyzes the results of a pedagogical and didactic experiment which was focused on the problem of teaching environmentally-friendly behaviours to young kindergarten children. It is essential to awaken children's curiosity and desire to know more about environmental issues in their regions so that children develop their own…

Environmentally friendly and biobased lubricants

USDA-ARS?s Scientific Manuscript database

Biobased and environmentally friendly lubricants are finding applications in many areas ranging from hydraulic fluids to grease. They offer excellent biodegradability and very low ecotoxicity; high viscosity index; improved tribological properties; lower volatility and flash points relative to petro...

Social domain based modulation of neural responses to threat: The different roles of romantic partners versus friends.

PubMed

Morriss, Jayne; Bell, Tiffany; Johnstone, Tom; van Reekum, Carien M; Hill, Jonathan

2018-06-21

The neural circuitry associated with threat regulation in the absence of other people is well established. An examination of threat regulatory processes with people from different domains of an individual's social world is key to understanding social emotion regulation and personality functioning conceptualised as social domain organisation. In this study, 42 healthy female participants completed functional magnetic imaging sessions in which they underwent a scan in the presence of a romantic partner or friend, whilst completing a threat of shock task. In the presence of a romantic partner vs. friend, we found a reduction in amygdala activation to threat vs. safe trials over time. Furthermore, in the presence of a romantic partner vs. friend we observed greater subgenual anterior cingulate cortex and ventromedial prefrontal cortex activation to threat vs. safe trials overall. The results support the hypothesis that recruitment of threat regulation circuitry is modulated by romantic partner relative to another person well-known to the individual. Future work needs to examine neural responses to a wider range of stimuli across more social domains, and implications of failures of this neural organisation for psychopathology.

EPA Enforcement and Compliance History Online

EPA Pesticide Factsheets

The Environmental Protection Agency's Enforcement and Compliance History Online (ECHO) website provides customizable and downloadable information about environmental inspections, violations, and enforcement actions for EPA-regulated facilities related to the Clean Air Act, Clean Water Act, Resource Conservation and Recovery Act, and Safe Drinking Water Act. These data are updated weekly as part of the ECHO data refresh, and ECHO offers many user-friendly options to explore data, including:? Facility Search: ECHO information is searchable by varied criteria, including location, facility type, and compliance status. Search results are customizable and downloadable.? Comparative Maps and State Dashboards: These tools offer aggregated information about facility compliance status, regulatory agency compliance monitoring, and enforcement activity at the national and state level.? Bulk Data Downloads: One of ECHO??s most popular features is the ability to work offline by downloading large data sets. Users can take advantage of the ECHO Exporter, which provides summary information about each facility in comma-separated values (csv) file format, or download data sets by program as zip files.

Multi-Shell Nano-CarboScavengers for Petroleum Spill Remediation

PubMed Central

Daza, Enrique A.; Misra, Santosh K.; Scott, John; Tripathi, Indu; Promisel, Christine; Sharma, Brajendra K.; Topczewski, Jacek; Chaudhuri, Santanu; Pan, Dipanjan

2017-01-01

Increasingly frequent petroleum contamination in water bodies continues to threaten our ecosystem, which lacks efficient and safe remediation tactics both on macro and nanoscales. Current nanomaterial and dispersant remediation methods neglect to investigate their adverse environmental and biological impact, which can lead to a synergistic chemical imbalance. In response to this rising threat, a highly efficient, environmentally friendly and biocompatible nano-dispersant has been developed comprising a multi-shelled nanoparticle termed ‘Nano-CarboScavengers’ (NCS) with native properties for facile recovery via booms and mesh tools. NCS treated different forms of petroleum oil (raw and distillate form) with considerable efficiency (80% and 91%, respectively) utilizing sequestration and dispersion abilities in tandem with a ~10:1 (oil: NCS; w/w) loading capacity. In extreme contrast with chemical dispersants, the NCS was found to be remarkably benign in in vitro and in vivo assays. Additionally, the carbonaceous nature of NCS broke down by human myeloperoxidase and horseradish peroxidase enzymes, revealing that incidental biological uptake can enzymatically digest the sugar based core. PMID:28157204

Multi-Shell Nano-CarboScavengers for Petroleum Spill Remediation

NASA Astrophysics Data System (ADS)

Daza, Enrique A.; Misra, Santosh K.; Scott, John; Tripathi, Indu; Promisel, Christine; Sharma, Brajendra K.; Topczewski, Jacek; Chaudhuri, Santanu; Pan, Dipanjan

2017-02-01

Increasingly frequent petroleum contamination in water bodies continues to threaten our ecosystem, which lacks efficient and safe remediation tactics both on macro and nanoscales. Current nanomaterial and dispersant remediation methods neglect to investigate their adverse environmental and biological impact, which can lead to a synergistic chemical imbalance. In response to this rising threat, a highly efficient, environmentally friendly and biocompatible nano-dispersant has been developed comprising a multi-shelled nanoparticle termed ‘Nano-CarboScavengers’ (NCS) with native properties for facile recovery via booms and mesh tools. NCS treated different forms of petroleum oil (raw and distillate form) with considerable efficiency (80% and 91%, respectively) utilizing sequestration and dispersion abilities in tandem with a ~10:1 (oil: NCS; w/w) loading capacity. In extreme contrast with chemical dispersants, the NCS was found to be remarkably benign in in vitro and in vivo assays. Additionally, the carbonaceous nature of NCS broke down by human myeloperoxidase and horseradish peroxidase enzymes, revealing that incidental biological uptake can enzymatically digest the sugar based core.

Organic agriculture in the twenty-first century.

PubMed

Reganold, John P; Wachter, Jonathan M

2016-02-03

Organic agriculture has a history of being contentious and is considered by some as an inefficient approach to food production. Yet organic foods and beverages are a rapidly growing market segment in the global food industry. Here, we examine the performance of organic farming in light of four key sustainability metrics: productivity, environmental impact, economic viability and social wellbeing. Organic farming systems produce lower yields compared with conventional agriculture. However, they are more profitable and environmentally friendly, and deliver equally or more nutritious foods that contain less (or no) pesticide residues, compared with conventional farming. Moreover, initial evidence indicates that organic agricultural systems deliver greater ecosystem services and social benefits. Although organic agriculture has an untapped role to play when it comes to the establishment of sustainable farming systems, no single approach will safely feed the planet. Rather, a blend of organic and other innovative farming systems is needed. Significant barriers exist to adopting these systems, however, and a diversity of policy instruments will be required to facilitate their development and implementation.

Environmentally friendly driving feedback systems research and development for heavy duty trucks.

DOT National Transportation Integrated Search

2016-03-31

In this research project, the research team developed an environmentally-friendly driving feedback system for heavy-duty trucks, which was : adapted from a similar system previously developed for light-duty cars. The system consists of: 1) Eco-Routin...

Use of natural gas, methanol, and ethanol fuel emulsions as environmentally friendly energy carriers for mobile heat power plants

NASA Astrophysics Data System (ADS)

Likhanov, V. A.; Lopatin, O. P.

2017-12-01

The need for using environmentally friendly energy carriers for mobile heat power plants (HPPs) is grounded. Ecologically friendly sources of energy, such as natural gas as well as renewable methyl and ethyl alcohols, are investigated. In order to develop, determine, and optimize the composition of environmentally friendly energy carriers for an HPP, the latter has been tested when working on diesel fuel (DF), compressed natural gas (CNG), and methanol and ethanol fuel emulsions (MFE, EFE). It has been experimentally established that, for the application of environmentally friendly energy carriers for a 4Ch 11.0/12.5 diesel engine of a mobile fuel and power plant, it is necessary to maintain the following ratio of components when working on CNG: 80% gas and 20% DF primer portion. When working on an alcohol mixture, emulsions of the following composition were used: 25% alcohol (methanol or ethanol), 0.5% detergent-dispersant additive succinimide C-5A, 7% water, and 67.5% DF. When this diesel passed from oil DF to environmentally friendly energy sources, it allowed for the reduction of the content of exhaust gases (EG) (1) when working on CNG with recirculation of exhaust gases (EGR) (recirculation was used to eliminate the increased amount of nitric oxides by using CNG): carbon black by 5.8 times, carbon dioxide by 45.9%, and carbon monoxide by 23.8%; (2) when working on MFE: carbon black by 6.4 times, nitrogen oxides by 29.6%, carbon dioxide by 10.1%, and carbon oxide by 47.6%; (3) when working on EFE: carbon black by 4.8 times; nitrogen oxides by 40.3%, carbon dioxide by 26.6%, and carbon monoxide by 28.6%. The prospects of use of environmentally friendly energy carriers in diesels of mobile HPPs, such as natural gas, ethanol, and methanol, has been determined.

Natural-product-based chromenes as a novel class of potential termiticides.

PubMed

Meepagala, Kumudini M; Osbrink, Weste; Burandt, Charles; Lax, Alan; Duke, Stephen O

2011-11-01

Among the termite infestations in the United States, the Formosan subterranean termite, Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae), is considered to be the most devastating termite pest. This pest most likely invaded North America as a result of the disembarkation of wooden military cargo at the port of New Orleans that arrived from Asia during and after World War II. It has now spread over other states, including Texas, Florida, South Carolina and California. Devastation caused by C. formosanus in North America has been estimated to cost $ US 1 billion a year. Over the past decades, organochlorines and organophosphates, the two prominent classes of termite control agents, have been banned owing to environmental and human health concerns. At the present time, phenylpyrazoles, pyrethroids, chloronicotinyls and pyrroles are being used as termite control agents. Mammalian toxicity and seeping of these compounds into groundwater are some of the drawbacks associated with these treatments. The instruction for the application of these termiticides indicate ground water advisory. Hence, with the increasing spread of termite infestation there is an increased need to discover effective, environmentally friendly and safe termite control agents with minimal mammalian toxicity. Chromene analogs derived from a natural-product-based chromene amide isolated from Amyris texana were tested in a collaborative discovery program for effective, environmentally friendly termite control agents. Several chromene derivatives were synthesized and characterized as a novel class of potential termiticides, followed by bioassays. These compounds exhibited significantly higher mortalities compared with untreated controls in laboratory bioassays. Chromene derivatives have been shown to be a potential novel class of termiticides against Formosan subterranean termites. Copyright © 2011 Society of Chemical Industry.

Solvent extraction of gold using ionic liquid based process

NASA Astrophysics Data System (ADS)

Makertihartha, I. G. B. N.; Zunita, Megawati; Rizki, Z.; Dharmawijaya, P. T.

2017-01-01

In decades, many research and mineral processing industries are using solvent extraction technology for metal ions separation. Solvent extraction technique has been used for the purification of precious metals such as Au and Pd, and base metals such as Cu, Zn and Cd. This process uses organic compounds as solvent. Organic solvents have some undesired properties i.e. toxic, volatile, excessive used, flammable, difficult to recycle, low reusability, low Au recovery, together with the problems related to the disposal of spent extractants and diluents, even the costs associated with these processes are relatively expensive. Therefore, a lot of research have boosted into the development of safe and environmentally friendly process for Au separation. Ionic liquids (ILs) are the potential alternative for gold extraction because they possess several desirable properties, such as a the ability to expanse temperature process up to 300°C, good solvent properties for a wide range of metal ions, high selectivity, low vapor pressures, stability up to 200°C, easy preparation, environmentally friendly (commonly called as "green solvent"), and relatively low cost. This review paper is focused in investigate of some ILs that have the potentials as solvent in extraction of Au from mineral/metal alloy at various conditions (pH, temperature, and pressure). Performances of ILs extraction of Au are studied in depth, i.e. structural relationship of ILs with capability to separate Au from metal ions aggregate. Optimal extraction conditon in order to gain high percent of Au in mineral processing is also investigated.

Genetically Engineering Entomopathogenic Fungi.

PubMed

Zhao, H; Lovett, B; Fang, W

2016-01-01

Entomopathogenic fungi have been developed as environmentally friendly alternatives to chemical insecticides in biocontrol programs for agricultural pests and vectors of disease. However, mycoinsecticides currently have a small market share due to low virulence and inconsistencies in their performance. Genetic engineering has made it possible to significantly improve the virulence of fungi and their tolerance to adverse conditions. Virulence enhancement has been achieved by engineering fungi to express insect proteins and insecticidal proteins/peptides from insect predators and other insect pathogens, or by overexpressing the pathogen's own genes. Importantly, protein engineering can be used to mix and match functional domains from diverse genes sourced from entomopathogenic fungi and other organisms, producing insecticidal proteins with novel characteristics. Fungal tolerance to abiotic stresses, especially UV radiation, has been greatly improved by introducing into entomopathogens a photoreactivation system from an archaean and pigment synthesis pathways from nonentomopathogenic fungi. Conversely, gene knockout strategies have produced strains with reduced ecological fitness as recipients for genetic engineering to improve virulence; the resulting strains are hypervirulent, but will not persist in the environment. Coupled with their natural insect specificity, safety concerns can also be mitigated by using safe effector proteins with selection marker genes removed after transformation. With the increasing public concern over the continued use of synthetic chemical insecticides and growing public acceptance of genetically modified organisms, new types of biological insecticides produced by genetic engineering offer a range of environmentally friendly options for cost-effective control of insect pests. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation of Patient Safety Indicators in Semnan City Hospitals by Using the Patient Safety Friendly Hospital Initiative (PSFHI).

PubMed

Babamohamadi, Hassan; Nemati, Roghayeh Khabiri; Nobahar, Monir; Keighobady, Seifullah; Ghazavi, Soheila; Izadi-Sabet, Farideh; Najafpour, Zhila

2016-08-01

Nowadays, patient safety issue is among one of the main concerns of the hospital policy worldwide. This study aimed to evaluate the patient safety status in hospitals affiliated to Semnan city, using the WHO model for Patient Safety Friendly Hospital Initiatives (PSFHI) in summer 2014. That was a cross sectional descriptive study that addressed patient safety , which explained the current status of safety in the Semnan hospitals using by instrument of Patient safety friendly initiative standards (PSFHI). Data was collected from 5 hospitals in Semnan city during four weeks in May 2014. The finding of 5 areas examined showed that some components in critical standards had disadvantages. Critical standards of hospitals including areas of leadership and administration, patient and public involvement and safe evidence-based clinical practice, safe environment with and lifetime education in a safe and secure environment were analyzed. The domain of patient and public involvement obtained the lowest mean score and the domain of safe environment obtained the highest mean score in the surveyed hospitals. All the surveyed hospitals had a poor condition regarding standards based on patient safety. Further, the identified weak points are almost the same in the hospitals. Therefore, In order to achieve a good level of all aspects of the protocol, the goals should be considered in the level of strategic planning at hospitals. An effective execution of patient safety creatively may depend on the legal infrastructure and enforcement of standards by hospital management, organizational liability to expectation of patients, safety culture in hospitals.

Green Leaders

ERIC Educational Resources Information Center

Kennedy, Mike

2008-01-01

More and more people are viewing the world through green-tinted glasses, and those ideas about making school and university facilities more environmentally friendly suddenly are appearing to be prudent and responsible. Among the groups that have been advocating for environmentally friendly school design for years are the Collaborative for High…

Environmentally friendly lubricant development programs at the USDA

USDA-ARS?s Scientific Manuscript database

The USDA is engaged in a comprehensive program to bring about the development and commercialization of environmentally friendly lubricants. A wide range of critical issues are being addresses through basic and applied research internally and in collaboration with industry and academia. The main thr...

Design optimization of a vaneless ``fish-friendly'' swirl injector for small water turbines

NASA Astrophysics Data System (ADS)

Airody, Ajith; Peterson, Sean D.

2015-11-01

Small-scale hydro-electric plants are attractive options for powering remote sites, as they draw energy from local bodies of water. However, the environmental impact on the aquatic life drawn into the water turbine is a concern. To mitigate adverse consequences on the local fauna, small-scale water turbine design efforts have focused on developing ``fish-friendly'' facilities. The components of these turbines tend to have wider passages between the blades when compared to traditional turbines, and the rotors are designed to spin at much lower angular velocities, thus allowing fish to pass through safely. Galt Green Energy has proposed a vaneless casing that provides the swirl component to the flow approaching the rotor, eliminating the need for inlet guide vanes. We numerically model the flow through the casing using ANSYS CFX to assess the evolution of the axial and circumferential velocity symmetry and uniformity in various cross-sections within and downstream of the injector. The velocity distributions, as well as the pressure loss through the injector, are functions of the pitch angle and number of revolutions of the casing. Optimization of the casing design is discussed via an objective function consisting of the velocity and pressure performance measures.

Green Synthesis of InP/ZnS Core/Shell Quantum Dots for Application in Heavy-Metal-Free Light-Emitting Diodes

NASA Astrophysics Data System (ADS)

Kuo, Tsung-Rong; Hung, Shih-Ting; Lin, Yen-Ting; Chou, Tzu-Lin; Kuo, Ming-Cheng; Kuo, Ya-Pei; Chen, Chia-Chun

2017-09-01

Quantum dot light-emitting diodes (QD-LEDs) have been considered as potential display technologies with the characterizations of high color purity, flexibility, transparency, and cost efficiency. For the practical applications, the development of heavy-metal-free QD-LEDs from environment-friendly materials is the most important issue to reduce the impacts on human health and environmental pollution. In this work, heavy-metal-free InP/ZnS core/shell QDs with different fluorescence were prepared by green synthesis method with low cost, safe, and environment-friendly precursors. The InP/ZnS core/shell QDs with maximum fluorescence peak at 530 nm, superior fluorescence quantum yield of 60.1%, and full width at half maximum of 55 nm were applied as an emission layer to fabricate multilayered QD-LEDs. The multilayered InP/ZnS core/shell QD-LEDs showed the turn-on voltage at 5 V, the highest luminance (160 cd/m2) at 12 V, and the external quantum efficiency of 0.223% at 6.7 V. Overall, the multilayered InP/ZnS core/shell QD-LEDs reveal potential to be the heavy-metal-free QD-LEDs for future display applications.

Analysis of Environmental Friendly Library Based on the Satisfaction and Service Quality: study at Library “X”

NASA Astrophysics Data System (ADS)

Herdiansyah, Herdis; Satriya Utama, Andre; Safruddin; Hidayat, Heri; Gema Zuliana Irawan, Angga; Immanuel Tjandra Muliawan, R.; Mutia Pratiwi, Diana

2017-10-01

One of the factor that influenced the development of science is the existence of the library, which in this case is the college libraries. Library, which is located in the college environment, aims to supply collections of literatures to support research activities as well as educational for students of the college. Conceptually, every library now starts to practice environmental principles. For example, “X” library as a central library claims to be an environmental friendly library for practicing environmental friendly management, but the X library has not inserted the satisfaction and service aspect to the users, including whether it is true that environmental friendly process is perceived by library users. Satisfaction can be seen from the comparison between expectations and reality of library users. This paper analyzes the level of library user satisfaction with library services in the campus area and the gap between expectations and reality felt by the library users. The result of the research shows that there is a disparity between the hope of library management, which is sustainable and environmentally friendly with the reality in the management of the library, so that it has not given satisfaction to the users yet. The gap value of satisfaction that has the biggest difference is in the library collection with the value of 1.57; while for the smallest gap value is in the same service to all students with a value of 0.67.

Environmentally Friendly Pretreatment for Department of Defense Applications

DTIC Science & Technology

2012-08-29

Develop an environmentally friendly pretreatment system for multi-material Department of Defense applications ― Free of hexavalent chromium (Cr6...Zn phosphate and chrome wash primer •Two Zirconium pretreatment variations passed the 336 hr and 1000 hr B-117 outlined per MIL-DTL-53022 or MIL

Interdisciplinary Chemistry Experiment: An Environmentally Friendly Extraction of Lycopene

ERIC Educational Resources Information Center

Zhu, Jie; Zhang, Mingjie; Liu, Qingwei

2008-01-01

A novel experiment for the extraction of lycopene from tomato paste without the use of an organic solvent is described. The experiment employs polymer, green, and analytical chemistry. This environmentally friendly extraction is more efficient and requires less time than the traditional approach using an organic solvent. The extraction is…

Does better for the environment mean less tasty? Offering more climate-friendly meals is good for the environment and customer satisfaction.

PubMed

Visschers, Vivianne H M; Siegrist, Michael

2015-12-01

Food consumption comprises a significant portion of the total environmental impact of households. One way to reduce this impact may be to offer consumers more climate-friendly meal choices, such as when eating out. However, the environmental benefits of such an intervention will depend on not only consumers' liking of the climate-friendlier meals, but also on the perceived environmental impact. We therefore investigated the relationship between the global warming potential (GWP) of and consumers' liking of meals in two field studies in the same restaurant. Visitors to the restaurant were asked to rate the taste of the meal they had just consumed. These taste ratings were then related to the meals' GWP and number of purchases. In the second study, an intervention was tested consisting of a climate-friendly choice label and information posters. Contrary to expectations, it was found in both studies that the GWP of the meals was unrelated to the taste or the number of purchases. Offering more climate-friendly meals did not change consumer satisfaction. As expected, the introduction of the climate-friendly choice label increased the number of climate-friendly meal purchases. Therefore, offering more climate-friendly meals with a climate-friendly choice label can affect consumers' meal choices, but not their preferences or satisfaction, which is beneficial for the climate, consumers and gastronomic establishments. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Versatile and Scalable Approach toward Robust Superhydrophobic Porous Materials with Excellent Absorbency and Flame Retardancy

NASA Astrophysics Data System (ADS)

Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui

2016-08-01

The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications.

A Versatile and Scalable Approach toward Robust Superhydrophobic Porous Materials with Excellent Absorbency and Flame Retardancy

PubMed Central

Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui

2016-01-01

The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications. PMID:27501762

Environmental sentinel biomonitors: integrated response systems for monitoring toxic chemicals

NASA Astrophysics Data System (ADS)

van der Schalie, William H.; Reuter, Roy; Shedd, Tommy R.; Knechtges, Paul L.

2002-02-01

Operational environments for military forces are becoming potentially more dangerous due to the increased number, use, and misuse of toxic chemicals across the entire range of military missions. Defense personnel may be exposed to harmful chemicals as a result of industrial accidents or intentional or unintentional action of enemy, friendly forces, or indigenous populations. While there has been a significant military effort to enable forces to operate safely and survive and sustain operations in nuclear, biological, chemical warfare agent environments, until recently there has not been a concomitant effort associated with potential adverse health effects from exposures of deployed personnel to toxic industrial chemicals. To provide continuous real-time toxicity assessments across a broad spectrum of individual chemicals or chemical mixtures, an Environmental Sentinel Biomonitor (ESB) system concept is proposed. An ESB system will integrate data from one or more platforms of biologically-based systems and chemical detectors placed in the environment to sense developing toxic conditions and transmit time-relevant data for use in risk assessment, mitigation, and/or management. Issues, challenges, and next steps for the ESB system concept are described, based in part on discussions at a September 2001 workshop sponsored by the U.S. Army Center for Environmental Health Research.

NOAA Atmospheric, Marine and Arctic Monitoring Using UASs (including Rapid Response)

NASA Astrophysics Data System (ADS)

Coffey, J. J.; Jacobs, T.

2015-12-01

Unmanned systems have the potential to efficiently, effectively, economically, and safely bridge critical observation requirements in an environmentally friendly manner. As the United States' Atmospheric, Marine and Arctic areas of interest expand and include hard-to-reach regions of the Earth (such as the Arctic and remote oceanic areas) optimizing unmanned capabilities will be needed to advance the United States' science, technology and security efforts. Through increased multi-mission and multi-agency operations using improved inter-operable and autonomous unmanned systems, the research and operations communities will better collect environmental intelligence and better protect our Country against hazardous weather, environmental, marine and polar hazards. This presentation will examine NOAA's Atmospheric, Marine and Arctic Monitoring Unmanned Aircraft System (UAS) strategies which includes developing a coordinated effort to maximize the efficiency and capabilities of unmanned systems across the federal government and research partners. Numerous intra- and inter-agency operational demonstrations and assessments have been made to verify and validated these strategies. This includes the introduction of the Targeted Autonomous Insitu Sensing and Rapid Response (TAISRR) with UAS concept of operations. The presentation will also discuss the requisite UAS capabilities and our experience in using them.

"From safe source to safe sink" development of colorimetric assay for gabapentin in bulk drug and capsules using naturally derived genipin.

PubMed

Winotapun, Weerapath; Kongpakwattana, Khachen; Dejpittayanunt, Sirirat; Pathomcharoensukchai, Suwaparp; Suksaran, Udomluck; Nuntharatanapong, Nopparat; Rojanarata, Theerasak

2012-09-15

A novel colorimetric assay for gabapentin in bulk drug and capsules has been developed via a safety-and-sustainability concerning concept. The method relied on the reaction of primary amino group of drug with non-toxic and eco-friendly genipin in totally aqueous medium to form the blue product which was subsequently measured by visible spectrophotometry at 590 nm. Under the optimized conditions, Beer's law was obeyed in the concentration range of 0.15-0.50 mM (r(2)=0.9998). It was accurate, precise and insensitive to the interferences from all related compounds specified in the United States Pharmacopeia as well as commonly used excipients. Furthermore, it gave the assay results in agreement with the pharmacopeial chromatographic method. Owing to the environmental concern and responsibility, a fast and facile method was also proposed for the treatment of waste generated from the assay based on the decoloration by using gypsum as a cheap and commonly available adsorbent. After the treatment, more than 95% of the initial blue product was removed from the waste solution and the treated waste was proven to be safe for aquatic organisms, as studied in brine shrimp and guppy fishes. Therefore, this work not only reports for the first time the application of naturally derived genipin to drug analysis, but also presents a new and contemporary paradigm that illustrates the fully benign-by-design development of the analytical methodologies in the era of Green Chemistry, starting from the safe source of reagents toward the safe sink when waste is released into the environment. Copyright © 2012 Elsevier B.V. All rights reserved.

Comparison of Environmentally Friendly Space Compatible Grease to its Predecessor in a Space Mechanism Bearing Test Rig

NASA Technical Reports Server (NTRS)

Jett, T. R.; Baker, M. A.; Thom, R. L.

1997-01-01

Perfluoroakylpolyether (PFPE) greases are used extensively in critical flight hardware in a space environment. In the past, these greases have been processed using chlorofluorocarbon (CFC) based solvents. In response to the recent ban of CFC's, new formulations of environmentally friendly PFPE greases that are not processed with CFC based solvents were developed. The purpose of this study was to compare the performance of a new environmentally friendly formulation PFPE grease to a previously proven space compatible formulation PFPE grease. A one year test using 20 small electrical motors (two bearings per motor) was conducted in a high vacuum environment(2.0 x 10(exp 4)) Torr at a temperature of 90 C. Twenty bearings were lubricated with a new environmentally friendly formulation, and twenty bearings were lubricated with an old formulation. The mass of each lubricated bearing was measured both pre and post test. Along with mass loss measurements a profilometer trace was taken to measure post test wear of the bearings. In addition the bearings were visually examined and analyzed using an optical microscope.

Epilepsy

MedlinePlus

... Staying Safe Videos for Educators Search English Español Epilepsy KidsHealth / For Teens / Epilepsy What's in this article? ... embarrass himself or scare his friends. What Is Epilepsy? Epilepsy is a condition of the nervous system ...

Laser cleaning of the contaminations on the surface of tire mould

NASA Astrophysics Data System (ADS)

Ye, Yayun; Jia, Baoshen; Chen, Jing; Jiang, Yilan; Tang, Hongping; Wang, Haijun; Luan, Xiaoyu; Liao, Wei; Zhang, Chuanchao; Yao, Caizhen

2017-07-01

During the manufacturing of tires, surface pollutants on tire mould will lead to the production of unqualified tires. Tire moulds need to be regularly cleaned. Laser cleaning is recognized as a non-destructive, effective, precise and environmental friendly method. In this paper, laser cleaning was used to remove contaminants on tire mould surface. First, laser induced damage experiments were performed. The results showed that the roughness and hardness of the cast steel sample surface seldom changed under the energy range of 140.1-580.2 mJ laser irradiation 1 pulse and the energy range of 44.7-168.9 mJ laser irradiation 100 pulses. In the laser cleaning experiments, the cleaning thresholds and the optimal cleaning parameters were obtained. Results indicated that laser cleaning was safe and effective for tire mould contamination removal.

Children's representations of nature using photovoice and community mapping: perspectives from South Africa.

PubMed

Adams, Sabirah; Savahl, Shazly; Fattore, Tobia

2017-12-01

The aim of the study was to explore children's representations and perceptions of natural spaces using photovoice and community mapping. The sample consisted of 28 children aged 12-14 years residing in urban and rural communities in the Western Cape, South Africa. Data were collected by means of a series of six focus groups interviews (three photovoice discussion groups and three community mapping discussion groups). For the photovoice missions, children were provided with a 28-exposure disposable camera and given 1 week to complete their missions. Thematic analysis was employed to analyse the data. Three key themes emerged, namely: safe spaces in nature, unsafe spaces in nature, and children's favourite places in nature. Socio-economic status (SES) was found to be a determining factor in how children make sense of natural spaces. Children from low SES communities indicated being more constricted in their mobility, and were unable to access to safe natural spaces compared to the children from the middle SES community. It is recommended that an expedient starting point would be to work towards and build environmentally and child-friendly communities for children, with children as key contributors in the planning process using a child participation framework.

Perception of Radiation Risk by Japanese Radiation Specialists Evaluated as a Safe Dose Before the Fukushima Nuclear Accident.

PubMed

Miura, Miwa; Ono, Koji; Yamauchi, Motohiro; Matsuda, Naoki

2016-06-01

From October to December 2010, just before the radiological accident at the Fukushima Daiichi nuclear power plant, 71 radiation professionals from radiation facilities in Japan were asked what they considered as a "safe dose" of radiation for themselves, their partners, parents, children, siblings, and friends. Although the 'safe dose' they noted varied widely, from less than 1 mSv y to more than 100 mSv y, the average dose was 35.6 mSv y, which is around the middle point between the legal exposure dose limits for the annual average and for any single year. Similar results were obtained from other surveys of members of the Japan Radioisotope Association (36.9 mSv y) and of the Oita Prefectural Hospital (36.8 mSv y). Among family members and friends, the minimum average "safe" dose was 8.5 mSv y for children, for whom 50% of the responders claimed a "safe dose" of less than 1 mSv. Gender, age and specialty of the radiation professional also affected their notion of a "safe dose." These findings suggest that the perception of radiation risk varies widely even for radiation professionals and that the legal exposure dose limits derived from regulatory science may act as an anchor of safety. The different levels of risk perception for different target groups among radiation professionals appear similar to those in the general population. The gap between these characteristics of radiation professionals and the generally accepted picture of radiation professionals might have played a role in the state of confusion after the radiological accident.

Impact of Quillaja saponaria saponins on grapevine ecosystem organisms.

PubMed

Fischer, Marc J C; Pensec, Flora; Demangeat, Gérard; Farine, Sibylle; Chong, Julie; Ramírez-Suero, Montserrat; Mazet, Flore; Bertsch, Christophe

2011-08-01

The control of grapevine pathogens is a rising concern in Vitis vinifera culture. The current international trend is toward banning chemicals that are highly toxic to the environment and human workers, and adopting tighter regulations. We evaluated the impact of saponins on three kinds of organisms found in grapevine culture. The ectoparasitic nematode Xiphinema index, the parasitic fungus Botrytis cinerea and various yeast strains representative of the must fermentation population were incubated on synthetic media supplemented with variable concentrations of Quillaja saponaria saponins. Saponins induced reduction in the growth of B. cinerea and showed nematicide effects on X. index. The control of X. index and Botrytis cinerea is discussed in the context of the potential use of these chemicals as environmentally-friendly grapevine treatments. With Saccharomyces cerevisiae and other yeasts, saponins showed higher toxicity against S. cerevisiae strains isolated from wine or palm wine whereas laboratory strains or strains isolated from oak exhibited better resistance. This indicates that Q. saponaria saponins effects against yeast microflora should be assessed in the field before they can be considered an environmentally-safe new molecule against B. cinerea and X. index.

Caenorhabditis elegans Predation on Bacillus anthracis: Decontamination of Spore Contaminated Soil with Germinants and Nematodes.

PubMed

Schelkle, Bettina; Choi, Young; Baillie, Leslie W; Richter, William; Buyuk, Fatih; Celik, Elif; Wendling, Morgan; Sahin, Mitat; Gallagher, Theresa

2017-01-01

Remediation of Bacillus anthracis -contaminated soil is challenging and approaches to reduce overall spore levels in environmentally contaminated soil or after intentional release of the infectious disease agent in a safe, low-cost manner are needed. B. anthracis spores are highly resistant to biocides, but once germinated they become susceptible to traditional biocides or potentially even natural predators such as nematodes in the soil environment. Here, we describe a two-step approach to reducing B. anthracis spore load in soil during laboratory trials, whereby germinants and Caenorhabditis elegans nematodes are applied concurrently. While the application of germinants reduced B. anthracis spore load by up to four logs depending on soil type, the addition of nematodes achieved a further log reduction in spore count. These laboratory based results suggest that the combined use of nematodes and germinants could represent a promising approach for the remediation of B. anthracis spore contaminated soil. Originality-Significance Statement: This study demonstrates for the first time the successful use of environmentally friendly decontamination methods to inactivate Bacillus anthracis spores in soil using natural predators of the bacterium, nematode worms.

Green remediation. Tool for safe and sustainable environment: a review

NASA Astrophysics Data System (ADS)

Singh, Mamta; Pant, Gaurav; Hossain, Kaizar; Bhatia, A. K.

2017-10-01

Nowadays, the bioremediation of toxic pollutants is a subject of interest in terms of health issues and environmental cleaning. In the present review, an eco-friendly, cost-effective approach is discussed for the detoxification of environmental pollutants by the means of natural purifier, i.e., blue-green algae over the conventional methods. Industrial wastes having toxic pollutants are not able to eliminate completely by existing the conventional techniques; in fact, these methods can only change their form rather than the entire degradation. These pollutants have an adverse effect on aquatic life, such as fauna and flora, and finally harm human life directly or indirectly. Cyanobacterial approach for the removal of this contaminant is an efficient tool for sustainable development and pollution control. Cyanobacteria are the primary consumers of food chain which absorbed complex toxic compounds from environments and convert them to simple nontoxic compounds which finally protect higher food chain consumer and eliminate risk of pollution. In addition, these organisms have capability to solve secondary pollution, as they can remediate radioactive compound, petroleum waste and degrade toxins from pesticides.

Facile Synthesis of Monodisperse Gold Nanocrystals Using Virola oleifera

NASA Astrophysics Data System (ADS)

Milaneze, Bárbara A.; Oliveira, Jairo P.; Augusto, Ingrid; Keijok, Wanderson J.; Côrrea, Andressa S.; Ferreira, Débora M.; Nunes, Otalíbio C.; Gonçalves, Rita de Cássia R.; Kitagawa, Rodrigo R.; Celante, Vinícius G.; da Silva, André Romero; Pereira, Ana Claudia H.; Endringer, Denise C.; Schuenck, Ricardo P.; Guimarães, Marco C. C.

2016-10-01

The development of new routes and strategies for nanotechnology applications that only employ green synthesis has inspired investigators to devise natural systems. Among these systems, the synthesis of gold nanoparticles using plant extracts has been actively developed as an alternative, efficient, cost-effective, and environmentally safe method for producing nanoparticles, and this approach is also suitable for large-scale synthesis. This study reports reproducible and completely natural gold nanocrystals that were synthesized using Virola oleifera extract. V. oleifera resin is rich in epicatechin, ferulic acid, gallic acid, and flavonoids (i.e., quercetin and eriodictyol). These gold nanoparticles play three roles. First, these nanoparticles exhibit remarkable stability based on their zeta potential. Second, these nanoparticles are functionalized with flavonoids, and third, an efficient, economical, and environmentally friendly mechanism can be employed to produce green nanoparticles with organic compounds on the surface. Our model is capable of reducing the resin of V. oleifera, which creates stability and opens a new avenue for biological applications. This method does not require painstaking conditions or hazardous agents and is a rapid, efficient, and green approach for the fabrication of monodisperse gold nanoparticles.

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

NASA Astrophysics Data System (ADS)

Uglyanitca, Andrey; Solonin, Kirill

2017-11-01

The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Green Synthesis of InP/ZnS Core/Shell Quantum Dots for Application in Heavy-Metal-Free Light-Emitting Diodes.

PubMed

Kuo, Tsung-Rong; Hung, Shih-Ting; Lin, Yen-Ting; Chou, Tzu-Lin; Kuo, Ming-Cheng; Kuo, Ya-Pei; Chen, Chia-Chun

2017-09-19

Quantum dot light-emitting diodes (QD-LEDs) have been considered as potential display technologies with the characterizations of high color purity, flexibility, transparency, and cost efficiency. For the practical applications, the development of heavy-metal-free QD-LEDs from environment-friendly materials is the most important issue to reduce the impacts on human health and environmental pollution. In this work, heavy-metal-free InP/ZnS core/shell QDs with different fluorescence were prepared by green synthesis method with low cost, safe, and environment-friendly precursors. The InP/ZnS core/shell QDs with maximum fluorescence peak at ~ 530 nm, superior fluorescence quantum yield of 60.1%, and full width at half maximum of 55 nm were applied as an emission layer to fabricate multilayered QD-LEDs. The multilayered InP/ZnS core/shell QD-LEDs showed the turn-on voltage at ~ 5 V, the highest luminance (160 cd/m 2 ) at 12 V, and the external quantum efficiency of 0.223% at 6.7 V. Overall, the multilayered InP/ZnS core/shell QD-LEDs reveal potential to be the heavy-metal-free QD-LEDs for future display applications.

Hands-On Practical Chemistry for All: Why and How?

NASA Astrophysics Data System (ADS)

Bradley, John D.; Durbach, S.; Bell, B.; Mungarulire, J.; Kimel, H.

1998-11-01

Practical work in chemistry is invariably described as essential in chemical education, and a variety of aims is claimed for it. Yet in schools around the world it is frequently absent from the real curriculum. Although some of the explanations advanced for this conundrum are little more than excuses, there is truth in the cost explanation. In this article we report on our development of a system based on microscale chemistry kits for individual students. These reusable kits comprise a number of components specially designed around a Comboplate made of optically clear plastic. The kits are supplied in individual zip-lock bags with a variety of configurations to suit different grades and curricula. Chemicals are supplied as solids and prepared solutions in quantities suitable for a whole class for one year, and student worksheets are available. The total system is cost-effective, safe, environmentally friendly, and versatile. The system has been very well received in both wealthy and poor contexts and countries by both teachers and students. It is so convenient and user-friendly it appeals to teachers. For students, pride of ownership is tapped by the individual kits. Their portability facilitates fieldwork and also distance learning. The system, developed through academic-industrial cooperation, may well achieve a global revolution in chemistry teaching and learning.

Synthesis of copper oxide nanowires and nanoporous copper via environmentally friendly transformation of bulk copper-calcium alloys.

PubMed

Zhang, X; Turcheniuk, K; Zusmann, B; Benson, J; Nelson, S; Luo, S; Magasinski, A; Yushin, G

2018-05-24

In this work, we report a novel, one-step, inexpensive and environmentally friendly synthesis of Cu nanostructures by means of chemical de-alloying of bulk Cu-Ca alloys in aqueous solutions. By controlling the synthesis conditions, we tune the morphology of the nanostructured Cu from nanoporous Cu to copper oxide nanowires.

A Research-Based Undergraduate Organic Laboratory Project: Investigation of a One-Pot, Multicomponent, Environmentally Friendly Prins-Friedel-Crafts-Type Reaction

ERIC Educational Resources Information Center

Dintzner, Matthew R.; Maresh, Justin J.; Kinzie, Charles R.; Arena, Anthony F.; Speltz, Thomas

2012-01-01

Students in the undergraduate organic laboratory synthesize tetrahydro-2-(4-nitrophenyl)-4-phenyl-2"H"-pyran via the Montmorillonite K10 clay-catalyzed reaction of p-nitrobenzaldehye with methanol, 3-buten-1-ol, and benzene. The synthesis comprises an environmentally friendly tandem Prins-Friedel-Crafts-type multicomponent reaction (MCR) and sets…

Awareness, Openness and Eco-Friendly (AOE) Model Teaches Pre-Service Teachers on How to Be Eco-Friendly

ERIC Educational Resources Information Center

Jena, Ananta Kumar

2012-01-01

This paper studied the empirical pattern to observe the overall attitude of pre service teachers' of different training colleges towards environmental education and practice. Environmental education is a continuous lifelong process, starts at the preschool level and continues up to adulthood via all levels of education. In this context, to know…

The use of nipah leaves (Nypa fruticans) as an environmentally friendly roofing material

NASA Astrophysics Data System (ADS)

Umar, Muhammad Zakaria; Faslih, Arman; Arsyad, Muhammad; Ikhsan, Ainussalbi Al; Umar, Mazhfia

2017-09-01

An environmentally friendly building is a building that cares for the environment. The use of building materials from plants are very beneficial to maintain the climatic conditions of space and one proper example is the roof made from palm leaves. Petoaha Village, located in the District of Abeli, Kendari Municipality has craftsmen specified in creating roof from palm leaves. The purpose of this study to analyze and identify the instruments of labor, materials, and how to create a roof of palm leaves in the Petoaha Village. This research applies a qualitative case study approach. The result shows that the roof of palm leaves is categorized as an environmentally friendly roofing material due to simple working tools, vegetative based material, man power use and preservation process through immersion in sea water.

Maternity Leave: Tips for Returning to Work

MedlinePlus

... set yourself up for a successful return to work: Find dependable child care. Consider local child care providers and facilities or make other arrangements. Look for a safe, stimulating environment and qualified caregivers. Ask your baby's doctor, friends, ...

Environmentally Friendly Cleaners for Removing Tar from Metal Surfaces

DTIC Science & Technology

2009-04-01

treatment plants that handle phosphate type solu- tions. The terms used by commercial vendors such as environmentally friendly, all natural, green, and...solvents used in relation to diesel fuel, and the procedure can also rank solvents quantitatively. Sacco (2004) has studied the blending of two plant ...other bituminous materials from industrial equipment surfaces. The composition is a mixture of a carrier monocyclic monoterpene and a nonionic

The impact of incinerators on human health and environment.

PubMed

Sharma, Raman; Sharma, Meenakshi; Sharma, Ratika; Sharma, Vivek

2013-01-01

Of the total wastes generated by health-care organizations, 10%-25% are biomedical wastes, which are hazardous to humans and the environment and requires specific treatment and management. For decades, incineration was the method of choice for the treatment of such infectious wastes. Incinerator releases a wide variety of pollutants depending on the composition of the waste, which leads to health deterioration and environmental degradation. The significant pollutants emitted are particulate matter, metals, acid gases, oxides of nitrogen, and sulfur, aside from the release of innumerable substances of unknown toxicity. This process of waste incineration poses a significant threat to public health and the environment. The major impact on health is the higher incidence of cancer and respiratory symptoms; other potential effects are congenital abnormalities, hormonal defects, and increase in sex ratio. The effect on the environmental is in the form of global warming, acidification, photochemical ozone or smog formation, eutrophication, and human and animal toxicity. Thus, there is a need to skip to newer, widely accepted, economical, and environment-friendly technologies. The use of hydroclaves and plasma pyrolysis for the incineration of biomedical wastes leads to lesser environmental degradation, negligible health impacts, safe handling of treated wastes, lesser running and maintenance costs, more effective reduction of microorganisms, and safer disposal.

Predicting Australian adults' sun-safe behaviour: examining the role of personal and social norms.

PubMed

White, Katherine M; Starfelt, Louise C; Young, Ross McD; Hawkes, Anna L; Leske, Stuart; Hamilton, Kyra

2015-05-01

To address the scarcity of comprehensive, theory-based research in the Australian context, this study, using a theory of planned behaviour (TPB) framework, investigated the role of personal and social norms to identify the key predictors of adult Australians' sun-safe intentions and behaviour. The study used a prospective design with two waves of data collection, 1 week apart. Participants were 816 adults (48.2% men) aged between 18 and 88 years recruited from urban, regional, and rural areas of Australia. At baseline, participants completed a questionnaire assessing the standard TPB predictors (attitude, subjective norm, and perceived behavioural control [PBC]), past behaviour, behavioural intention, and additional measures of group norm for the referent groups of friends and family, image norm, personal norm, personal choice/responsibility, and Australian identity. Seventy-one per cent of the participants (n = 577) reported on their sun-safe behaviour in the subsequent week. Via path modelling, past behaviour, attitude, group norm (friends), personal norm, and personal choice/responsibility emerged as independent predictors of intentions which, in turn, predicted sun-safe behaviour prospectively. Past behaviour, but not PBC, had direct effects on sun-safe behaviour. The model explained 61.6% and 43.9% of the variance in intention and behaviour, respectively. This study provides support for the use of a comprehensive theoretical decision-making model to explain Australian adults' sun-safe intentions and behaviours and identifies viable targets for health-promoting messages in this high-risk context. Statement of contribution What is already known on this subject? Identifying determinants of sun-safe behaviour is vital in high-risk cancer areas like Australia. For young Australians, friendship group norm is a key influence of intentions and behaviour. Little is known about drivers of sun safety, especially norms, among Australian adults in general. What does this study add? This study drew on qualitative data and reconceptualized norms for Australians' sun-safe decisions. Friendship group norm and personal norm, not family group norm, influence sun-safe intentions. Perceived responsibility and choice to be sun safe also impact on people's intentions. © 2014 The British Psychological Society.

An aptamer-based paper microfluidic device for the colorimetric determination of cocaine.

PubMed

Wang, Ling; Musile, Giacomo; McCord, Bruce R

2018-02-01

A method utilizing paper microfluidics coupled with gold nanoparticles and two anticocaine aptamers has been developed to detect seized cocaine samples. The ready-to-use format involves the use of a paper strip that produces a color change resulting from the salt-induced aggregation of gold nanoparticles producing a visible color change indicating the presence of the drug. This format is specific for the detection of cocaine. The visual LOD for the method was 2.5 μg and the camera based LOD was 2.36 μg. The operation of the device is easy and rapid, and does not require extensive training or instrumentation. All of the materials utilized in the device are safe and environmental friendly. This device should prove a useful tool for the screening of forensic samples. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Behaviour of one-step spray-coated carbon nanotube supercapacitor in ambient light harvester circuit with printed organic solar cell and electrochromic display.

PubMed

Tuukkanen, Sampo; Välimäki, Marja; Lehtimäki, Suvi; Vuorinen, Tiina; Lupo, Donald

2016-03-09

A printed energy harvesting and storage circuit powered by ambient office lighting and its use to power a printed display is reported. The autonomous device is composed of three printed electronic components: an organic photovoltaic module, a carbon-nanotubes-only supercapacitor and an electrochromic display element. Components are fabricated from safe and environmentally friendly materials, and have been fabricated using solution processing methods, which translate into low-cost and high-throughput manufacturing. A supercapacitor made of spray-coated carbon nanotube based ink and aqueous NaCl electrolyte was charged using a printed organic photovoltaic module exposed to office lighting conditions. The supercapacitor charging rate, self-discharge rate and display operation were studied in detail. The supercapacitor self-discharge rate was found to depend on the charging rate. The fully charged supercapacitor was used as a power source to run the electrochromic display over 50 times.

New spectrophotometric estimation of indomethacin capsules with niacinamide as hydrotropic solubilizing agent.

PubMed

Maheshwari, R K; Rathore, Amit; Agrawal, Archana; Gupta, Megha A

2011-07-01

Hydrotropic solubilization process involves cooperative intermolecular interaction with several balancing molecular forces, rather than either a specific complexation event or a process dominated by a medium effect, such as co-solvency or salting-in. In the present investigation, hydrotropic solution of 2 M niacinamide was employed as the solubilizing agent to solubilize the poorly water-soluble drug, indomethacin, from the capsule dosage form for spectrophotometric determination in ultraviolet region. Hydrotropic agent used did not interfere in the spectrophotometric analysis. In preliminary solubility studies, it was found that there was more than fivefold enhancement in the aqueous solubility of indomethacin (poorly water-soluble drug) in 2 M niacinamide solution as compared to its aqueous solubility at 28 ± 1°C. The proposed method is new, simple, safe, environmentally friendly, economic, accurate and cost-effective and can be successfully employed in routine analysis.

High-Capacity Hydrogen-Based Green-Energy Storage Solutions For The Grid Balancing

NASA Astrophysics Data System (ADS)

D'Errico, F.; Screnci, A.

One of the current main challenges in green-power storage and smart grids is the lack of effective solutions for accommodating the unbalance between renewable energy sources, that offer intermittent electricity supply, and a variable electricity demand. Energy management systems have to be foreseen for the near future, while they still represent a major challenge. Integrating intermittent renewable energy sources, by safe and cost-effective energy storage systems based on solid state hydrogen is today achievable thanks to recently some technology breakthroughs. Optimized solid storage method made of magnesium-based hydrides guarantees a very rapid absorption and desorption kinetics. Coupled with electrolyzer technology, high-capacity storage of green-hydrogen is therefore practicable. Besides these aspects, magnesium has been emerging as environmentally friend energy storage method to sustain integration, monitoring and control of large quantity of GWh from high capacity renewable generation in the EU.

High-Capacity Hydrogen-Based Green-Energy Storage Solutions for the Grid Balancing

NASA Astrophysics Data System (ADS)

D'Errico, F.; Screnci, A.

One of the current main challenges in green-power storage and smart grids is the lack of effective solutions for accommodating the unbalance between renewable energy sources, that offer intermittent electricity supply, and a variable electricity demand. Energy management systems have to be foreseen for the near future, while they still represent a major challenge. Integrating intermittent renewable energy sources, by safe and cost-effective energy storage systems based on solid state hydrogen is today achievable thanks to recently some technology breakthroughs. Optimized solid storage method made of magnesium-based hydrides guarantees a very rapid absorption and desorption kinetics. Coupled with electrolyzer technology, high-capacity storage of green-hydrogen is therefore practicable. Besides these aspects, magnesium has been emerging as environmentally friend energy storage method to sustain integration, monitoring and control of large quantity of GWh from high capacity renewable generation in the EU.

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

NASA Technical Reports Server (NTRS)

Pearman, Benjamin Pieter; Li, Wenyan; Buhrow, Jerry; Zhang, Xuejun; Surma, Jan; Fitzpatrick, Lilly; Montgomery, Eliza; Calle, Luz Marina

2014-01-01

Research efforts are under way to replace current corrosion inhibitors with more environmentally friendly alternatives. However, problems with corrosion inhibition efficiency, coating compatibility and solubility have hindered the use of many of these materials as simple pigment additives.This paper will present technical details on how the Corrosion Technology Lab at NASAs Kennedy Space Center (KSC) has addressed these issues by encapsulating environmentally friendly inhibitors into organic and inorganic microparticles and microcapsules. The synthetic process for polymer particles was characterized and post-synthesis analysis was performed to determine the interactions between the inhibitors and the encapsulation material. The pH-controlled release of inhibitors from various particle formulations in aqueous base was monitored and compared to both electrochemical and salt immersion accelerated corrosion experiment. Furthermore, synergistic corrosion inhibition effects observed during the corrosion testing of several inhibitor combinations will be presented.

Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper

NASA Astrophysics Data System (ADS)

Pettersson, F.; Keskinen, J.; Remonen, T.; von Hertzen, L.; Jansson, E.; Tappura, K.; Zhang, Y.; Wilén, C.-E.; Österbacka, R.

2014-12-01

Environmentally friendly supercapacitors are fabricated using commercial grade aluminum coated paper as a substrate and symmetrical activated carbon electrodes as large area electrodes. Different choline chloride-based eutectic solvents are used as electrolyte. These are inexpensive, environmentally friendly and have a larger operating window compared to that of water electrolytes. As the entire device is printed and the materials used are inexpensive, both small- and large-area power sources can be fabricated to be used in cheap, disposable and recyclable devices. Supercapacitors with different eutectic solvents are measured using cyclic charge-discharge and impedance spectroscopy measurements and compared to one widely used and one "green" imidazolium ionic liquid; EMIM:TFSI and EcoEng 212™, respectively. A mixture of ethylene glycol and choline chloride, Glyceline™, show the highest capacitance and power densities of the electrolytes being tested, including the imidazolium alternatives.

Purchase of a Raman and Photoluminescence Imaging System for Characterization of Advanced Electrochemical and Electronic Materials

DTIC Science & Technology

2016-01-05

2015, Abstract #1092. The Role of Chromium (III) in the Corrosion Inhibition of AA2024-T3 By Trivalent Chromium Process Coatings by Greg Swain...to replace chromate conversion coatings and primers with more environmentally-friendly, non-chromated coatings. The Trivalent Chromium Process (TCP...coatings and primers with more environmentally-friendly, non-chromated coatings. The Trivalent Chromium Process (TCP) coating, originally developed

Sun: Friend and Foe.

ERIC Educational Resources Information Center

Froschauer, Linda K.; Boudrot, Barbara

1986-01-01

Reviews the benefits and hazards that the sun provides. Describes activities which focus on the power of the sun and on the development of "Sun-sensible" behavior. Also included is a poster which contains puzzles and additional information and activities on safe sunning. (ML)

Extracellular red Monascus pigment-mediated rapid one-step synthesis of silver nanoparticles and its application in biomedical and environment.

PubMed

Koli, Sunil H; Mohite, Bhavana V; Suryawanshi, Rahul K; Borase, Hemant P; Patil, Satish V

2018-05-01

The development of a safe and eco-friendly method for metal nanoparticle synthesis has an increasing demand, due to emerging environmental and biological harms of hazardous chemicals used in existing nanosynthesis methods. The present investigation reports a rapid one-step, eco-friendly and green approach for the formation of nanosized silver particles (AgNPs) using extracellular non-toxic-colored fungal metabolites (Monascus pigments-MPs). The formation of nanosized silver particles utilizing Monascus pigments was confirmed after exposure of reaction mixture to sunlight, by visually color change and further established by spectrophotometric analysis. The size, shape, and topography of synthesized MPs-AgNPs were well-defined using different microscopic and spectroscopic techniques, i.e., FE-SEM, HR-TEM, and DLS. The average size of MPs-AgNPs was found to be 10-40 nm with a spherical shape which was highly stable and dispersed in the solution. HR-TEM and XRD confirmed crystalline nature of MPs-AgNPs. The biocidal potential of MPs-AgNPs was evaluated against three bacterial pathogens such as Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus and it was observed that the MPs-AgNPs significantly inhibited the growth of all three bacterial pathogens. The anti-biofilm activity of MPs-AgNPs was recorded against antibiotic-resistant P. aeruginosa. Besides, the colorimetric metal sensing using MPs-AgNPs was studied. Among the metals tested, the selective Hg 2+ -sensing potential at micromolar concentration was observed. In conclusion, this is the rapid one-step (within 12-15 min), environment-friendly method for synthesis of AgNPs and synthesized MPs-AgNPs could be used as a potential antibacterial agent against antibiotic-resistant bacterial pathogens.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

PubMed

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Physical activity, psychosocial and perceived environmental factors in adolescents from Northeast Brazil.

PubMed

Farias Júnior, José Cazuza de; Reis, Rodrigo Siqueira; Hallal, Pedro Curi

2014-05-01

The aim of this study was to evaluate the association between levels of physical activity, psychosocial and perceived environmental factors in adolescents from Northeastern Brazil. A cross-sectional epidemiologic study was conducted with 2,859 adolescents enrolled in secondary schools (57.8% females; mean = 16.5 years; SD = 1.2) in the city of João Pessoa, Paraíba State, Brazil. The following physical activity correlates were measured: attitude, self-efficacy, social support from friends and parents, and perceived environmental characteristics. Physical activity was measured using a questionnaire. Multivariable ordinal logistic regression with proportional odds model analysis showed that the following factors are positively related to physical activity levels in adolescents: attitude, self-efficacy, as well as social support from parents and friends. Physical activity intervention programs should increase self-efficacy and social support from parents and friends, as well as a positive attitude toward physical activity.

Influence of electrolyte ion-solvent interactions on the performances of supercapacitors porous carbon electrodes

NASA Astrophysics Data System (ADS)

Decaux, C.; Matei Ghimbeu, C.; Dahbi, M.; Anouti, M.; Lemordant, D.; Béguin, F.; Vix-Guterl, C.; Raymundo-Piñero, E.

2014-10-01

The development of advanced and safe electrochemical supercapacitors or hybrid supercapacitors combining a battery electrode material such as graphite and a porous carbon electrode implies the use of new electrolytes containing a tetra-alkylammonium or lithium salt dissolved preferentially in a safe and environmentally friendly solvent such as alkylcarbonates. In those systems, the carbon porosity of the activated carbon electrode controls the electrochemical behavior of the whole device. In this work, it is demonstrated that electrolytes containing highly polarizing ions such as Li+ dissolved in polar solvents such as alkylcarbonates do not completely loss their solvation shell at the opposite of what is observed for poorly solvated cations like TEABF4. As a consequence, the optimal carbon pore size for obtaining the largest energy density, while keeping a high power density, is wider when strongly solvated cations, like Li+ are used than for conventional organic electrolytes using acetonitrile as solvent and TEA+ as salt cations. TEA+ cations are easily desolvated and hence are able to penetrate in small pores matching the dimensions of bare ions. The dissimilarity of behavior of alkylcarbonates and acetonitrile based electrolytes highlights the importance of ion-solvent interactions when searching the optimal porous texture for the electrode material.

Children’s representations of nature using photovoice and community mapping: perspectives from South Africa

PubMed Central

Adams, Sabirah; Savahl, Shazly; Fattore, Tobia

2017-01-01

ABSTRACT The aim of the study was to explore children’s representations and perceptions of natural spaces using photovoice and community mapping. The sample consisted of 28 children aged 12–14 years residing in urban and rural communities in the Western Cape, South Africa. Data were collected by means of a series of six focus groups interviews (three photovoice discussion groups and three community mapping discussion groups). For the photovoice missions, children were provided with a 28-exposure disposable camera and given 1 week to complete their missions. Thematic analysis was employed to analyse the data. Three key themes emerged, namely: safe spaces in nature, unsafe spaces in nature, and children’s favourite places in nature. Socio-economic status (SES) was found to be a determining factor in how children make sense of natural spaces. Children from low SES communities indicated being more constricted in their mobility, and were unable to access to safe natural spaces compared to the children from the middle SES community. It is recommended that an expedient starting point would be to work towards and build environmentally and child-friendly communities for children, with children as key contributors in the planning process using a child participation framework. PMID:28699852

Toxicity evaluation of prodigiosin from Serratia marcescens in a Caenorhabditis elegans model

NASA Astrophysics Data System (ADS)

Seah, Siew-Wei; Nathan, Sheila; Wan, Kiew-Lian

2016-11-01

Serratia marcescens produces several secondary metabolites, including a red antimicrobial pigment, prodigiosin. There is considerable interest in prodigiosin and its derivatives due to their anticancer and immunosuppressive properties. Prodigiosin has also become the main choice of red dye in textiles. As prodigiosin has potentially high commercial value, there is a demand to develop high-throughput and cost-effective bioprocesses for prodigiosin production. However little is still known about its toxicity. This study was carried out to investigate the toxicity effect of prodigiosin. To determine if prodigiosin was potentially toxic to eukaryotic systems, the S. marcescens ATCC 274 wild type (Sma 274) and the non-prodigiosin producer S. marcescens Bizio WF mutant ATCC 29635 (WF mutant) were grown under the optimised conditions for prodigiosin production and fed to the nematode Caenorhabditis elegans. The mean time to death (TDmean) for Sma 274-infected worms assayed on agar was 112.6 hours while the WF mutant culture had a TDmean of 104.4 hours. However, the nematode killing kinetics were not significantly different between the prodigiosin-producing and non-producing S. marcescens strains (p>0.05). In lieu of its non-toxic property, prodigiosin has the potential to be developed for safe therapeutic applications and as a safe environmental friendly bio-dye.

Energy Efficiency and Importance of Renewable Energy Sources in Latvia

NASA Astrophysics Data System (ADS)

Skapare, I.; Kreslins, A.

2007-10-01

The main goal of Latvian energy policy is to ensure safe and environmentally friendly long-term energy supply at cost-effective prices, contributing to enhance competitiveness, and to ensure safe energy transit. The Latvian Parliament approved an Energy Efficiency Strategy in 2000. Its objective is to decrease energy consumption per unit of GDP by 25% by 2010. Awareness raising, implementation of standards and economic incentives for self financing are the main instruments to increase energy efficiency, mentioned in the strategy. Latvia, as many other European Union member states, is dependent on the import of primary energy resources. The Latvian Renewable Energy strategy is still under development. The only recent study on RES was developed in the framework of a PHARE program in year 2000: "Renewable energy resource program", where three main objectives for a future RES strategy were proposed: 1. To increase the use of wood waste and low value wood and forest residues. 2. To improve efficiency of combustion technologies and to replace outdated plants. 3. To increase the use of renewables in Combined Heat and Power plants (CHP). Through the Renewable Energy and Energy Efficiency Partnership, partners will develop a set of new shared activities, and coordinate and strengthen existing efforts in this area.

Microscale chemistry-based design of eco-friendly, reagent-saving and efficient pharmaceutical analysis: a miniaturized Volhard's titration for the assay of sodium chloride.

PubMed

Rojanarata, Theerasak; Sumran, Krissadecha; Nateetaweewat, Paksupang; Winotapun, Weerapath; Sukpisit, Sirarat; Opanasopit, Praneet; Ngawhirunpat, Tanasait

2011-09-15

This work demonstrates the extended application of microscale chemistry which has been used in the educational discipline to the real analytical purposes. Using Volhard's titration for the determination of sodium chloride as a paradigm, the reaction was downscaled to less than 2 mL conducted in commercially available microcentrifuge tubes and using micropipettes for the measurement and transfer of reagents. The equivalence point was determined spectrophotometrically on the microplates which quickened the multi-sample measurements. After the validation and evaluation with bulk and dosage forms, the downsized method showed good accuracy comparable to the British Pharmacopeial macroscale method and gave satisfactory precision (intra-day, inter-day, inter-analyst and inter-equipment) with the relative standard deviation of less than 0.5%. Interestingly, the amount of nitric acid, silver nitrate, ferric alum and ammonium thiocyanate consumed in the miniaturized titration was reduced by the factors of 25, 50, 50 and 215 times, respectively. The use of environmentally dangerous dibutyl phthalate was absolutely eliminated in the proposed method. Furthermore, the release of solid waste silver chloride was drastically reduced by about 25 folds. Therefore, microscale chemistry is an attractive, facile and powerful green strategy for the development of eco-friendly, safe, and cost-effective analytical methods suitable for a sustainable environment. Copyright © 2011 Elsevier B.V. All rights reserved.

Wastewater treatment by local microalgae strains for CO2 sequestration and biofuel production

NASA Astrophysics Data System (ADS)

Ansari, Abeera A.; Khoja, Asif Hussain; Nawar, Azra; Qayyum, Muneeb; Ali, Ehsan

2017-11-01

Currently, the scientific community is keenly working on environmental-friendly processes for the production of clean energy and sustainable development. The study was conducted to cultivate microalgae in raw institutional wastewater for water treatment, enriched production of biomass and CO2 sequestration. The strains which were used in this study are Scenedesmus sp. and Chlorella sp. which were isolated from Kallar Kahar Lake, Pakistan. Both strains were cultivated in synthetic growth medium (Bold's Basal Medium) to enhance biomass production. Afterward, microalgae cultures were inoculated in wastewater sample in mixotrophic mode under ambient conditions. The impurities in wastewater were successfully removed from the original sample by the 7th day of operation. COD 95%, nitrate 99.7% and phosphate 80.5% were removed by applying Scenedesmus sp. Meanwhile, Chlorella sp. reduced 84.86% COD, 98.2% nitrate and 70% phosphate, respectively. Interestingly, sulfates were removed from wastewater completely by both strains. Besides being useful in wastewater remediation, these microalgae strains were subsequently harvested for lipid extraction and potential biofuel production was determined. Therefore, the applied method is an environmentally safe, cost-effective and alternative technology for wastewater treatment. Furthermore, the achieved biomass through this process can be used for the production of biofuels.

Caenorhabditis elegans Predation on Bacillus anthracis: Decontamination of Spore Contaminated Soil with Germinants and Nematodes

PubMed Central

Schelkle, Bettina; Choi, Young; Baillie, Leslie W.; Richter, William; Buyuk, Fatih; Celik, Elif; Wendling, Morgan; Sahin, Mitat; Gallagher, Theresa

2018-01-01

Remediation of Bacillus anthracis-contaminated soil is challenging and approaches to reduce overall spore levels in environmentally contaminated soil or after intentional release of the infectious disease agent in a safe, low-cost manner are needed. B. anthracis spores are highly resistant to biocides, but once germinated they become susceptible to traditional biocides or potentially even natural predators such as nematodes in the soil environment. Here, we describe a two-step approach to reducing B. anthracis spore load in soil during laboratory trials, whereby germinants and Caenorhabditis elegans nematodes are applied concurrently. While the application of germinants reduced B. anthracis spore load by up to four logs depending on soil type, the addition of nematodes achieved a further log reduction in spore count. These laboratory based results suggest that the combined use of nematodes and germinants could represent a promising approach for the remediation of B. anthracis spore contaminated soil. Originality-Significance Statement: This study demonstrates for the first time the successful use of environmentally friendly decontamination methods to inactivate Bacillus anthracis spores in soil using natural predators of the bacterium, nematode worms. PMID:29379472

Civil Penalty Policies

EPA Pesticide Factsheets

The Environmental Protection Agency's Enforcement and Compliance History Online (ECHO) website provides customizable and downloadable information about environmental inspections, violations, and enforcement actions for EPA-regulated facilities, like power plants and factories. ECHO advances public information by sharing data related to facility compliance with and regulatory agency activity related to air, hazardous waste, clean water, and drinking water regulations. ECHO offers many user-friendly options to explore data, including:1. Facility Search (http://echo.epa.gov/facilities/facility-search?mediaSelected=all): ECHO information is searchable by varied criteria, including location, facility type, and compliance status related to the Clean Air Act, Clean Water Act, Resource Conservation and Recovery Act, and Safe Drinking Water Act. Search results are customizable and downloadable.2. Comparative Maps (http://echo.epa.gov/maps/state-comparative-maps) and State Dashboards (http://echo.epa.gov/trends/comparative-maps-dashboards/state-air-dashboard): These tools offer aggregated information about facility compliance status and regulatory agency compliance monitoring and enforcement activity at the national and state level.3. Bulk Data Downloads (http://echo.epa.gov/resources/echo-data/data-downloads): One of ECHO's most popular features is the ability to work offline by downloading large data sets. Users can take advantage of the ECHO Exporter, which provides su

Synthesis of Gold Nanoparticles Using Leaf Extract of Ziziphus zizyphus and their Antimicrobial Activity

PubMed Central

Akkam, Yazan; Al-Batayneh, Khalid M.; Abo Alrob, Osama; Alkilany, Alaaldin M.; Benamara, Mourad

2018-01-01

(1) Background: There is a growing need for the development of new methods for the synthesis of nanoparticles. The interest in such particles has raised concerns about the environmental safety of their production methods; (2) Objectives: The current methods of nanoparticle production are often expensive and employ chemicals that are potentially harmful to the environment, which calls for the development of “greener” protocols. Herein we describe the synthesis of gold nanoparticles (AuNPs) using plant extracts, which offers an alternative, efficient, inexpensive, and environmentally friendly method to produce well-defined geometries of nanoparticles; (3) Methods: The phytochemicals present in the aqueous leaf extract acted as an effective reducing agent. The generated AuNPs were characterized by Transmission electron microscopy (TEM), Scanning electron microscope (SEM), and Atomic Force microscopy (AFM), X-ray diffraction (XRD), UV-visible spectroscopy, energy dispersive X-ray (EDX), and thermogravimetric analyses (TGA); (4) Results and Conclusions: The prepared nanoparticles were found to be biocompatible and exhibited no antimicrobial or antifungal effect, deeming the particles safe for various applications in nanomedicine. TGA analysis revealed that biomolecules, which were present in the plant extract, capped the nanoparticles and acted as stabilizing agents. PMID:29562669

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

LCA-Based Product Claims

EPA Science Inventory

Product environmental claims include a wide range of marketing claims, labels, declarations, statements and reports that are generally intended to distinguish a product as environmentally friendly or ‘green’. They differ from organizational environmental claims in the...

ENERGY EFFICIENCY AND ENVIRONMENTALLY FRIENDLY DISTRIBUTED ENERGY STORAGE BATTERY

DOE Office of Scientific and Technical Information (OSTI.GOV)

LANDI, J.T.; PLIVELICH, R.F.

2006-04-30

Electro Energy, Inc. conducted a research project to develop an energy efficient and environmentally friendly bipolar Ni-MH battery for distributed energy storage applications. Rechargeable batteries with long life and low cost potentially play a significant role by reducing electricity cost and pollution. A rechargeable battery functions as a reservoir for storage for electrical energy, carries energy for portable applications, or can provide peaking energy when a demand for electrical power exceeds primary generating capabilities.

Gender sensitive education in watershed management to support environmental friendly city

NASA Astrophysics Data System (ADS)

Asteria, D.; Budidarmono; Herdiansyah, H.; Ni’mah, N. L.

2018-03-01

This study is about gender-sensitive perspective in watershed management education program as one of capacity building for citizens in watershed management with community-based strategy to support environmental friendly cities and security for women from flood disasters. Involving women and increasing women’s active participation in sustainable watershed management is essential in urban area. In global warming and climate change situations, city management should be integrated between social aspect and environmental planning. This study used mix method (concurrent embedded type, with quantitative as primary method) with research type is descriptive-explanatory. The result of this study is education strategies with gender approaches and affirmative action through emancipation approach and local knowledge from women’s experiences can increase women’s participation. Women’s empowerment efforts need integrated intervention and collaboration from government, NGO, and other stakeholders to optimize women’s role in watershed management for support environmental friendly city. The implication of this study is an educational strategy on watershed conservation with gender perspective to offer social engineering alternatives for decision makers to policy of sustainable watershed management in urban area related to flood mitigation efforts.

Aqueous hybrid ion batteries - An environmentally friendly alternative for stationary energy storage?

NASA Astrophysics Data System (ADS)

Peters, Jens F.; Weil, Marcel

2017-10-01

Aqueous hybrid ion batteries (AHIB) are being promoted as an environmentally friendly alternative to existing stationary battery technologies. However, no quantification of their potential environmental impacts has yet been done. This paper presents a prospective life cycle assessment of an AHIB module and compares its performance with lithium-ion and sodium-ion batteries in two different stationary energy storage applications. The findings show that the claim of being an environmentally friendly technology can only be supported with some major limitations. While the AHIB uses abundant and non-toxic materials, it has a very low energy density and requires increased amounts of material for providing a given storage capacity. Per kWh of battery, results comparable to those of the alternative lithium- or sodium-ion batteries are obtained, but significantly higher impacts under global warming and ozone depletion aspects. The comparable high cycle life of the AHIB compensates this partially, requiring less battery replacements over the lifetime of the application. On the other hand, its internal inefficiencies are higher, what becomes the dominating factor when charging majorly fossil based electricity, making AHIB unattractive for this type of applications.

Candidate eco-friendly gas mixtures for MPGDs

NASA Astrophysics Data System (ADS)

Benussi, L.; Bianco, S.; Saviano, G.; Muhammad, S.; Piccolo, D.; Ferrini, M.; Parvis, M.; Grassini, S.; Colafranceschi, S.; Kjølbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-02-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Water treatment and handwashing behaviors among non-pregnant friends and relatives of participants in an antenatal hygiene promotion program in Malawi.

PubMed

Russo, Elizabeth T; Sheth, Anandi; Menon, Manoj; Wannemuehler, Kathleen; Weinger, Merri; Kudzala, Amose C; Tauzie, Blessius; Masuku, Humphreys D; Msowoya, Tapona E; Quick, Robert

2012-05-01

Access to safe drinking water and improved hygiene are essential for preventing diarrheal diseases. To integrate hygiene improvement with antenatal care, free hygiene kits (water storage containers, water treatment solution, soap) and educational messages were distributed to pregnant women at antenatal clinics in Malawi. We assessed water treatment and hygiene practices of 275 non-pregnant friends and relatives of the hygiene kit recipients at baseline and follow-up nine months later to measure program impact on non-participants in the same communities. At follow-up, friends and relatives who did not receive kits or education were more likely than at baseline to purchase and use water treatment solution (25% versus 1%; P < 0.0001) and demonstrate correct handwashing practices (60% versus 18%; P < 0.0001). This antenatal clinic-based program resulted in improved water treatment and hygiene behaviors among non-pregnant friends and relatives living in the same communities as hygiene kit recipients, suggesting that program benefits extended beyond direct beneficiaries.

Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

EPA Science Inventory

Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

Environmentally safe fluids for hydraulics used in civil engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wirzberger, E.; Rexroth, M.

1995-12-31

The majority of hydraulic units used in civil engineering are operated with pressure fluids based on mineral oil. Most civil engineering projects are installed near or immediately next to bodies of water, therefore, any leakage signifies danger for the environment. We try to avert this danger with increasingly safe hydraulic drives. However, growing environmental awareness and stricter laws are demanding more and more environmentally safe hydraulic fluids. Today, the manufacturers of fluids and hydraulic drives have to accept this challenge. What exactly is an environmentally safe hydraulic fluid? The major objectives are: (1) they have to be biodegradable, (2) nomore » fish toxicity, (3) no water pollution, and (4) food compatibility.« less

Environmental education and socioresponsive engineering. Report of an educational initiative in Hyderabad, India.

PubMed

Ansari, Ali Uddin; Jafari, Ashfaque; Mirzana, Ishrat Meera; Imtiaz, Zulfia; Lukacs, Heather

2003-07-01

A recent initiative at Muffakham Jah College of Engineering and Technology, Hyderabad, India, has resulted in setting up a program called Centre for Environment Studies and Socioresponsive Engineering which seeks to involve undergraduate students in studying and solving environmental problems in and around the city of Hyderabad, India. Two pilot projects have been undertaken--one focusing on design and construction of an eco-friendly house, The Natural House, and another directed at improving environmental and general living conditions in a slum area. The paper describes our attempts and experience of motivating our students to take interest in such projects. In an interesting development we invited a member of a student-faculty team at Massachusetts Institute of Technology (M.I.T.) that is doing a project in Nepal on safe drinking water. We report in our paper how the presentation by the guest from M.I.T. served as a catalyst for generating interest among civil and mechanical engineering students in our own projects. The paper includes contributions from one of our students and the M.I.T. staff member, reporting on their experiences related to the slum development project. We also discuss the Natural House project and its international and educational significance as a means of inculcating sensitivity and interest in nature among engineering students. We propose a pledge for engineers similar to the Hippocratic Oath for medical professionals.

A novel, environmentally friendly sodium lauryl ether sulfate-, cocamidopropyl betaine-, cocamide monoethanolamine-containing buffer for MEKC on microfluidic devices.

PubMed

Hoeman, Kurt W; Culbertson, Christopher T

2008-12-01

A new buffer has been developed for fast, high-efficiency separations of amino acids by MEKC. This buffer was more environmentally friendly than the most commonly used surfactant-containing buffers for MEKC separations. It used a commercially available dishwashing soap by Seventh Generation (Burlington, VT, USA), which contained three micelle-forming agents. The mixed micelles were composed of sodium lauryl ether sulfate (anionic), cocamidopropyl betaine (zwitterionic), and cocamide monoethanolamine (non-ionic). The optimized buffer contained 5.0% w/w Seventh Generation Free & Clear dishwashing soap, 10 mM sodium borate, and was completely void of organics. The lack of organics and the biodegradability of the surfactant molecules made this buffer more environmentally friendly than typical SDS-containing buffers. This new buffer also had a different selectivity and provided faster separations with higher separation efficiencies than SDS-based buffers. Fast separations of BODIPY FL labeled amino acids yielded peaks with separation efficiencies greater than 100,000 in less than 20 s.

Safe Youth. Safe Schools.

MedlinePlus

... evidence. Research/Data Sources Crime Prevention Through Environmental Design (CPTED) School Project Research has shown that proper environmental design can reduce crime and fear associated with criminal ...

SOS Children's Friendly Community Historical Overview

ERIC Educational Resources Information Center

Lukaš, Mirko; Lenard, Ivan

2014-01-01

SOS Children's Village Croatia is categorized as a children's home whose primary goal is taking care of children without an adequate parental care or parents themselves. Moreover, it aims at providing children, regardless of their racial, national or religious affiliation, with affection and love in a safe family environment. In addition, SOS…

Perceived School Safety: Visual Narratives from the Middle Grades

ERIC Educational Resources Information Center

Biag, Manuelito

2014-01-01

Using participatory visual research methods, this study examined how certain low-income, urban youth in a high-minority middle school characterized safe and unsafe spaces on campus. Drawing from a convenience sample of identified gifted students in one classroom (N = 20), results suggested how caring support from adults, friendly peer…

Meal-Maker: A Virtual Meal Preparation Environment for Children with Cerebral Palsy

ERIC Educational Resources Information Center

Kirshner, Sharon; Weiss, Patrice L.; Tirosh, Emanuel

2011-01-01

Virtual reality (VR) technology enables evaluation and practice of specific skills in a motivating, user-friendly and safe way. The implementation of virtual game environments within clinical settings has increased substantially in recent years. However, the psychometric properties and feasibility of many applications have not been fully…

An Empirical Test of Self-Determination Theory as a Guide to Fostering Environmental Motivation

ERIC Educational Resources Information Center

Darner, Rebekka

2012-01-01

A goal of most environmental education is to motivate students toward environmentally friendly behaviour change. This article describes a study that elucidates how such motivation can be fostered in the classroom. It compared students' development of environmental motivation in a conventional post-secondary environmental biology course and a…

The Green Synthesis and Evaluation of Silver Nanoparticles and Zinc Oxide Nanoparticles

NASA Astrophysics Data System (ADS)

Gebear-Eigzabher, Bellsabel

Nanoparticle (NP) research has received exceptional attention as the field of study that contributes to transforming the world of materials science. When implementing NPs in consumer and industrial products, their unique properties improve technologies to the extent of significant game-changing breakthroughs. Conversely, the increased production of NPs, their use, their disposal or inadvertent release in the environment drove the need for processes and policies that ensures consumer and environmental safety. Mitigation of any harmful effects that NPs could potentially have combines methods of safe preparation, safe handling and safe disposal as well as containment of any inadvertent release. Our focus is in safe preparation of nanomaterials and we report green and energy efficient synthesis methods for metal NPs and metal oxide NPs of two popular materials: silver (Ag) and zinc oxide (ZnO). The thesis explained: 1) The impact of NPs in nowadays' world; 2) Synthesis methods that were designed to include environmentally-friendly staring materials and energy-saving fabrication processes, with emphasis on maintaining NPs final size and morphology when compared with existing methods; and 3) Nanoparticles characterization and data collection which allowed us to determine and/or validate their properties. Nanoparticles were studied using transmission electron microscope (TEM), X-Ray powder diffraction (XRD), low-voltage (5 keV) transmission electron microscopy (LV EM 5), Fourier-Transform Infrared Spectroscopy (FT-IR), and Ultraviolet-Visible (UV-Vis) spectroscopy. We developed an aqueous-based preparation of zinc oxide nanoparticles (ZnO NPs) using microwave-assisted chemistry to render a well-controlled particle size distribution within each set of reaction conditions in the range of 15 nm to 75 nm. We developed a scalable silver nanoparticles synthesis by chemical reduction methods. The NPs could be used in consumer products. The measurement tools for consumer products were also used on in-house synthesized Ag NPs. Commercially available silver nanoparticles have been compared with the in-house synthesized ones and characterized by Photothermal Lens (PTL) Spectroscopy. In respect to particle size and morphology, the Ag NPs synthesized by chemical reduction methods are similar to Ag nanoparticle solution available in the market. However, the synthesized nanoparticles are high in concentration and do not show signs of aggregation or agglomeration. It was concluded that our Ag NPs are superior to the commercially available ones by exhibiting large concentrations in ultra-stable dispersions.

Quality Partners

ERIC Educational Resources Information Center

Clark, Bob

2006-01-01

Green cleaning is gaining momentum. It is a method of cleaning and maintaining facilities that is friendly to the environment and healthful for students and staff. The process uses environmentally friendly and nontoxic cleaning products and practices that must be third-party-certified. Using green cleaning practices and products can result in…

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jang, Minho, E-mail: minmin40@hanmail.net; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr; Ji, Changyoon, E-mail: chnagyoon@yonsei.ac.kr

2015-01-15

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using themore » developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C{sub 6}H{sub 6} eq.) calculated by the previous model was much lower (1965 kg C{sub 6}H{sub 6} eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings.« less

Contributors to young drivers' driving styles - A comparison between Israel and Queensland.

PubMed

Skvirsky, Vera; Ben-Ari, Orit Taubman; Greenbury, Timothy J; Prato, Carlo G

2017-12-01

Among the numerous factors that contribute to young novice drivers' driving styles, personality characteristics, sociodemographic variables, family atmosphere, and friends' norms are known to have an important impact. However, cross-cultural comparisons are relatively rare in the safety literature concerning young drivers. This study aimed at comparing young drivers from Israel and Queensland (Australia) and examining the contribution of personality, sociodemographic, family and friends' aspects to their driving styles (reckless and careless; hostile and angry; anxious; patient and careful). More specifically, this study examined the associations between young drivers' driving style and their perceptions of separation-individuation, the family climate for road safety, and the safe driving climate among friends. We also examined sociodemographic and driving history variables such as gender, the marital status of parents, and personal exposure to traffic crashes. The study consisted of two samples of male and female young drivers (age 17-22) from Israel (n=160) and Queensland (n=160), who completed a set of valid and reliable self-report questionnaires. Findings indicate that in general, maladaptive driving styles are associated with lower family tendency to engage in promoting road safety, higher pressure and costs of driving with peers, and unhealthier separation-individuation aspects. The opposite is observed for the patient and careful driving style that relates to higher engagement of the family in road safety, lower pressure from friends, and healthier separation-individuation. Some differences were found regarding specific styles between the two samples. In addition, women scored lower than men in the reckless and careless style, and higher (in the Israeli sample) in the anxious as well as the patient and careful styles. Overall, similarities in the associations between the study variables in the samples exceed the differences, and the importance of examining variables on multi-levels when referring to young drivers' driving styles, is confirmed. The findings attest to the universal utility of the MDSI, together with the understanding that only a wider examination of personal and environmental contributors enables true insights into the complex behavior of driving among young drivers. Copyright © 2017 Elsevier Ltd. All rights reserved.

USING GENETIC ALGORITHMS TO DESIGN ENVIRONMENTALLY FRIENDLY PROCESSES

EPA Science Inventory

Genetic algorithm calculations are applied to the design of chemical processes to achieve improvements in environmental and economic performance. By finding the set of Pareto (i.e., non-dominated) solutions one can see how different objectives, such as environmental and economic ...

Environmental impact assessment and eco-friendly decision-making in civil structures.

PubMed

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Environment polluting conventional chemical control compared to an environmentally friendly IPM approach for control of diamondback moth, Plutella xylostella (L.), in China: a review.

PubMed

Shakeel, Muhammad; Farooq, Muhammad; Nasim, Wajid; Akram, Waseem; Khan, Fawad Zafar Ahmad; Jaleel, Waqar; Zhu, Xun; Yin, Haichen; Li, Shuzhong; Fahad, Shah; Hussain, Saddam; Chauhan, Bhagirath Singh; Jin, Fengliang

2017-06-01

The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.

Anaerobic digestion of bio-waste: A mini-review focusing on territorial and environmental aspects.

PubMed

Cecchi, Franco; Cavinato, Cristina

2015-05-01

Scientific and industrial experiences, together with economical and policies changes of last 30 years, bring anaerobic digestion among the most environmental friendly and economically advantageous technologies for organic waste treatment and management in Europe. In this short review, the role of anaerobic digestion of organic wastes is discussed, considering the opportunity of a territorial friendly approach, without barriers, where different organic wastes are co-treated. This objective can be achieved through two proposed strategies: one is the anaerobic digestion applied as a service for the agricultural and farming sector; the other as a service for citizen (biowaste, diapers and wastewater treatment integration). The union of these two strategies is an environmental- and territorial-friendly process that aims to produce renewable energy and fertiliser material, with a low greenhouse gas emission and nutrients recovery. The advantage of forthcoming application of anaerobic digestion of organic wastes, even for added value bioproducts production and new energy carriers, are finally discussed. Among several advantages of anaerobic digestion, the role of the environmental controller was evaluated, considering the ability of minimising the impacts exploiting the biochemical equilibrium and sensitivity as a quality assurance for digestate. © The Author(s) 2015.

Environmentally safe fluid extractor

DOEpatents

Sungaila, Zenon F.

1993-01-01

An environmentally safe fluid extraction device for use in mobile laboratory and industrial settings comprising a pump, compressor, valving system, waste recovery tank, fluid tank, and a exhaust filtering system.

Environmentally safe fluid extractor

DOEpatents

Sungaila, Zenon F.

1993-07-06

An environmentally safe fluid extraction device for use in mobile laboratory and industrial settings comprising a pump, compressor, valving system, waste recovery tank, fluid tank, and a exhaust filtering system.

Green synthesis and characterization of silver nanoparticles by leaf extracts of Cycas circinalis, Ficus amplissima, Commelina benghalensis and Lippia nodiflora

NASA Astrophysics Data System (ADS)

Johnson, I.; Prabu, H. Joy

2015-01-01

Biosynthesis of nanoparticles is a kind of bottom-up approach where the main reaction occurring is reduction. Since silver nanoparticles (AgNPs) have been used for infection prevention in medical field, it is more relevant to reduce their size using ancient Indian herbal plants. This method is good in anti-microbial efficiency against bacteria, viruses and other microorganisms and hence clearly enhances the medicinal usage of AgNPs. This type of green biosynthesis of nanoparticles has received increasing attention due to the growing need to develop safe, cost-effective and environmental-friendly technologies for nano-materials synthesis. In the process of synthesizing AgNPs, we observed a rapid reduction of silver ions leading to the formation of stable crystalline AgNPs in the solution. Plant extracts from Cycas circinalis, Ficus amplissima, Commelina benghalensis and Lippia nodiflora were used for the synthesis of AgNPs from silver nitrate solution. AgNPs were characterized by different techniques.

Choosing organics: a path analysis of factors underlying the selection of organic food among Australian consumers.

PubMed

Lockie, Stewart; Lyons, Kristen; Lawrence, Geoffrey; Grice, Janet

2004-10-01

Path analysis of attitudinal, motivational, demographic and behavioural factors influencing food choice among Australian consumers who had consumed at least some organic food in the preceding 12 months showed that concern with the naturalness of food and the sensory and emotional experience of eating were the major determinants of increasing levels of organic consumption. Increasing consumption was also related to other 'green consumption' behaviours such as recycling and to lower levels of concern with convenience in the purchase and preparation of food. Most of these factors were, in turn, strongly affected by gender and the level of responsibility taken by respondents for food provisioning within their households, a responsibility dominated by women. Education had a slightly negative effect on the levels of concern for sensory and emotional appeal due to lower levels of education among women. Income, age, political and ecological values and willingness to pay a premium for safe and environmentally friendly foods all had extremely minor effects.

Behaviour of one-step spray-coated carbon nanotube supercapacitor in ambient light harvester circuit with printed organic solar cell and electrochromic display

PubMed Central

Tuukkanen, Sampo; Välimäki, Marja; Lehtimäki, Suvi; Vuorinen, Tiina; Lupo, Donald

2016-01-01

A printed energy harvesting and storage circuit powered by ambient office lighting and its use to power a printed display is reported. The autonomous device is composed of three printed electronic components: an organic photovoltaic module, a carbon-nanotubes-only supercapacitor and an electrochromic display element. Components are fabricated from safe and environmentally friendly materials, and have been fabricated using solution processing methods, which translate into low-cost and high-throughput manufacturing. A supercapacitor made of spray-coated carbon nanotube based ink and aqueous NaCl electrolyte was charged using a printed organic photovoltaic module exposed to office lighting conditions. The supercapacitor charging rate, self-discharge rate and display operation were studied in detail. The supercapacitor self-discharge rate was found to depend on the charging rate. The fully charged supercapacitor was used as a power source to run the electrochromic display over 50 times. PMID:26957019

The subsea deployment and installation of flexible pipe catenaries for the Enserch Garden Banks 388 Freestanding Production Riser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herman, R.J.

1997-07-01

This narrative addresses the development of the subsea flexible pipe catenary handling tools and procedures as used in the Gulf of Mexico on the Enserch Garden Banks 388 Freestanding Production Riser. The philosophy that was invoked for the development of the tools and procedures was targeted on long term utilization and field maintenance capability with minimum vessel relocation requirements and minimum production interruptions. The initial emphasis for the required tools and procedures was to develop worker safe, environmentally friendly and cost effective equipment. These tools are for the deployment and installation of 3-inch Production and Annulus flexible pipe catenaries frommore » the Enserch Garden Banks 388 Floating Production Vessel to the system`s Freestanding Production Riser. The Pull In Jib system is common to the handling of all the catenaries. The Pull In Jib system has been designed to support the greater loads of the 8-inch and 12-inch export line catenaries.« less

Low-cost, solution processable carbon nanotube supercapacitors and their characterization

NASA Astrophysics Data System (ADS)

Lehtimäki, Suvi; Tuukkanen, Sampo; Pörhönen, Juho; Moilanen, Pasi; Virtanen, Jorma; Honkanen, Mari; Lupo, Donald

2014-06-01

We report ecological and low-cost carbon nanotube (CNT) supercapacitors fabricated using a simple, scalable solution processing method, where the use of a highly porous and electrically conductive active material eliminates the need for a current collector. Electrodes were fabricated on a poly(ethylene terephthalate) substrate from a printable multi-wall CNT ink, where the CNTs are solubilized in water using xylan as a dispersion agent. The dispersion method facilitates a very high concentration of CNTs in the ink. Supercapacitors were assembled using a paper separator and an aqueous NaCl electrolyte and the devices were characterized with a galvanostatic discharge method defined by an industrial standard. The capacitance of the 2 cm^2 devices was 6 mF/cm^2 (2.3 F/g) and equivalent series resistance 80 Ω . Low-cost supercapacitors fabricated from safe and environmentally friendly materials have potential applications as energy storage devices in ubiquitous and autonomous intelligence as well as in disposable low-end products.

Elicitation effect of Saccharomyces cerevisiae yeast extract on main health-promoting compounds and antioxidant and anti-inflammatory potential of butter lettuce (Lactuca sativa L.).

PubMed

Złotek, Urszula; Świeca, Michał

2016-05-01

This paper presents a study on changes in the main phytochemical levels and antioxidant and anti-inflammatory activity of lettuce caused by different doses and times of application of yeast extracts. Elicitation with yeast extract caused an increase in the total phenolic compounds and chlorophyll content, which varied according to the dose and time of spraying, but it did not have a positive impact on vitamin C, flavonoid and carotenoid content in lettuce. The best effect was achieved by double spraying with 1% yeast extract and by single spraying with 0.1% yeast extract. The increase in phytochemical content was positively correlated with the antioxidant and anti-inflammatory activity of the studied lettuce leaves. Chicoric acid seems to be the major contributor to these antioxidant activities. Yeast extract may be used as a natural, environmentally friendly and safe elicitor for improving the health-promoting qualities of lettuce. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Child-Friendly Schools: An Assessment of Secondary Schools

ERIC Educational Resources Information Center

Çobanoglu, Fatma; Ayvaz-Tuncel, Zeynep; Ordu, Aydan

2018-01-01

As education has many variables, essential arrangements are required in different areas to enhance its quality. School buildings, environmental arrangements, teaching and learning process, sources and materials, teachers, principals, health and security are the variables of which come to mind first. The concept of 'child-friendly school' ('CFS')…

Life cycle assessment of mobile phone housing.

PubMed

Yang, Jian-xin; Wang, Ru-song; Fu, Hao; Liu, Jing-ru

2004-01-01

The life cycle assessment of the mobile phone housing in Motorola(China) Electronics Ltd. was carried out, in which materials flows and environmental emissions based on a basic production scheme were analyzed and assessed. In the manufacturing stage, such primary processes as polycarbonate molding and surface painting are included, whereas different surface finishing technologies like normal painting, electroplate, IMD and VDM etc. were assessed. The results showed that housing decoration plays a significant role within the housing life cycle. The most significant environmental impact from housing production is the photochemical ozone formation potential. Environmental impacts of different decoration techniques varied widely, for example, the electroplating technique is more environmentally friendly than VDM. VDM consumes much more energy and raw material. In addition, the results of two alternative scenarios of dematerialization showed that material flow analysis and assessment is very important and valuable in selecting an environmentally friendly process.

It's Not Easy Building Green.

ERIC Educational Resources Information Center

Higgins, Joseph

2003-01-01

Discusses green buildings, facilities designed, constructed, and operated in an environmentally friendly and resource-efficient way. Discusses reasons for campuses to "go green," the "shades of green" or variations in environmental-friendliness, certification through the Leadership in Energy and Environmental Design (LEED) rating system, financial…

An environmental assessment of grass-finishing beef operations in Pennsylvania

USDA-ARS?s Scientific Manuscript database

Concern for the environmental sustainability of traditional beef production has increased consumer interest in alternatively produced beef products perceived to be more environmentally friendly. This includes those marketed under “grassfed beef” labels. However, little information exists on the env...

DESIGNING ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES WITH FUGITIVE AND OPEN EMISSIONS

EPA Science Inventory

Designing a chemical process normally includes aspects of economic and environmental disciplines. In this work we describe methods to quickly and easily evaluate the economics and potential environmental impacts of a process, with the hydrodealkylation of toluene as an example. ...

Is Formal Environmental Education Friendly to Nature? Environmental Ethics in Science Textbooks for Primary School Pupils in Poland

ERIC Educational Resources Information Center

Gola, Beata

2017-01-01

Due to the increased interest in ecology, global warming and numerous environmental problems, ecological issues are becoming extremely important in education. Many researchers and thinkers believe that solutions to environmental problems are affected by the environmental ethics adopted. This article identifies which of the three branches of…

Homogenous photocatalytic decontamination of prion infected stainless steel and titanium surfaces.

PubMed

Berberidou, Chrysanthi; Xanthopoulos, Konstantinos; Paspaltsis, Ioannis; Lourbopoulos, Athanasios; Polyzoidou, Eleni; Sklaviadis, Theodoros; Poulios, Ioannis

2013-01-01

Prions are notorious for their extraordinary resistance to traditional methods of decontamination, rendering their transmission a public health risk. Iatrogenic Creutzfeldt-Jakob disease (iCJD) via contaminated surgical instruments and medical devices has been verified both experimentally and clinically. Standard methods for prion inactivation by sodium hydroxide or sodium hypochlorite have failed, in some cases, to fully remove prion infectivity, while they are often impractical for routine applications. Prion accumulation in peripheral tissues and indications of human-to-human bloodborne prion transmission, highlight the need for novel, efficient, yet user-friendly methods of prion inactivation. Here we show both in vitro and in vivo that homogenous photocatalytic oxidation, mediated by the photo-Fenton reagent, has the potential to inactivate the pathological prion isoform adsorbed on metal substrates. Photocatalytic oxidation with 224 μg mL(-1) Fe (3+), 500 μg mL(-1) h(-1) H 2O 2, UV-A for 480 min lead to 100% survival in golden Syrian hamsters after intracranial implantation of stainless steel wires infected with the 263K prion strain. Interestingly, photocatalytic treatment of 263K infected titanium wires, under the same experimental conditions, prolonged the survival interval significantly, but failed to eliminate infectivity, a result that we correlate with the increased adsorption of PrP(Sc) on titanium, in comparison to stainless steel. Our findings strongly indicate that our, user--and environmentally--friendly protocol can be safely applied to the decontamination of prion infected stainless steel surfaces.

Fungi-assisted silver nanoparticle synthesis and their applications.

PubMed

Khan, Azhar U; Malik, Nazia; Khan, Masudulla; Cho, Moo Hwan; Khan, Mohammad Mansoob

2018-01-01

Nanotechnology is a rapidly developing field because of its wide range of applications in science, nanoscience and biotechnology. Nanobiotechnology deals with nanomaterials synthesised or modified using biotechnology. Fungi are used to synthesise metal nanoparticles and they have vast applications in wound healing, pathogen detection and control, food preservation, textiles, fabrics, etc. The present review describes the different types of fungi used for the biosyntheses of silver nanoparticles (AgNPs), along with their characterisation and possible biological applications. AgNPs synthesised by other physical and chemical methods are expensive and have toxic substances adsorbed onto them. Therefore, green, simple and effective approaches have been chosen for the biosynthesis of AgNPs, which are very important because of their lower toxicity and environmentally friendly behaviour. AgNPs synthesised using fungi have high monodispersity, specific composition and a narrow size range. In this regard, among the different biological methods used for metal nanoparticle synthesis, fungi are considered to be a superior biogenic method owing to their diversity and better size control. To further understand the biosynthesis of AgNPs using various fungi and evaluate their potential applications, this review discusses the antimicrobial, antibacterial, antifungal, antiviral, antidermatophytic, anti-inflammatory, antitumor, hepatoprotective, cytotoxic, hypotensive, and immunomodulatory activities of these AgNPs. The synthesis of AgNPs using fungi is a clean, green, inexpensive, eco-friendly, reliable, and safe method that can be used for a range of applications in real life for the benefit of human beings.

Water Treatment and Handwashing Behaviors among Non-Pregnant Friends and Relatives of Participants in an Antenatal Hygiene Promotion Program in Malawi

PubMed Central

Russo, Elizabeth T.; Sheth, Anandi; Menon, Manoj; Wannemuehler, Kathleen; Weinger, Merri; Kudzala, Amose C.; Tauzie, Blessius; Masuku, Humphreys D.; Msowoya, Tapona E.; Quick, Robert

2012-01-01

Access to safe drinking water and improved hygiene are essential for preventing diarrheal diseases. To integrate hygiene improvement with antenatal care, free hygiene kits (water storage containers, water treatment solution, soap) and educational messages were distributed to pregnant women at antenatal clinics in Malawi. We assessed water treatment and hygiene practices of 275 non-pregnant friends and relatives of the hygiene kit recipients at baseline and follow-up nine months later to measure program impact on non-participants in the same communities. At follow-up, friends and relatives who did not receive kits or education were more likely than at baseline to purchase and use water treatment solution (25% versus 1%; P < 0.0001) and demonstrate correct handwashing practices (60% versus 18%; P < 0.0001). This antenatal clinic–based program resulted in improved water treatment and hygiene behaviors among non-pregnant friends and relatives living in the same communities as hygiene kit recipients, suggesting that program benefits extended beyond direct beneficiaries. PMID:22556088

Sexual Violence Prevention through Bystander Education: An Experimental Evaluation

ERIC Educational Resources Information Center

Banyard, Victoria L.; Moynihan, Mary M.; Plante, Elizabethe G.

2007-01-01

The current study used an experimental design to evaluate a sexual violence prevention program based on a community of responsibility model that teaches women and men how to intervene safely and effectively in cases of sexual violence before, during, and after incidents with strangers, acquaintances, or friends. It approaches both women and men as…

Keeping Kids Safe Online

ERIC Educational Resources Information Center

Descy, Don E.

2006-01-01

What would people do without the Internet? It gives them the world at their fingertips. Almost anything that they want and need can be found in one neat little place. The Internet is a great place for kids also. They can be entertained, chat with friends, and learn about whatever interests them. Unfortunately the Internet also helps people…

This Specialty Line of Clothing Really Is the "Bee's Knees"

ERIC Educational Resources Information Center

Hollingsworth, Jan Carter

2009-01-01

This article features "Bee's Knees," a specialty line of clothing. While not the typical product one would think of when considering mobility equipment, this line of clothing certainly does aid in helping those with disabilities access their world more safely and comfortably. "Bee's Knees" offers pint-sized pants made of kid-friendly, durable…

Restore the Respect: How to Mediate School Conflicts and Keep Students Learning

ERIC Educational Resources Information Center

Gross, Ondine

2016-01-01

Unresolved conflicts in schools build barriers to learning, including low motivation, lack of focus, and disruptive behaviors that remove students from the classroom. When teacher-student conflicts occur, the negative effects can be long-lasting without a safe and structured way to repair the relationship. This reader-friendly guidebook has a…

The Complexation of the Na(super +) by 18-Crown-6 Studied via Nuclear Magnetic Resonance

ERIC Educational Resources Information Center

Peters, Steven J.; Stevenson, Cheryl D.

2004-01-01

A student friendly experiment that teaches several important concepts of modern nuclear magnetic resonance (NMR), like multinuclear capabilities, the NMR time scale, and time-averaged signals, is described along with some important concepts of thermo chemical equilibria. The mentioned experiment involves safe and inexpensive compounds, such as…

Contact Us

Science.gov Websites

SRC Engineering Research Center for Environmentally Benign Semiconductor Manufacturing (ERC ) ** Bringing Sustainability to Semiconductor Manufacturing ** A multi-university research center leading the way to environmentally friendly semiconductor manufacturing, sponsored by the Semiconductor Research

Behavioral intention and its relationship with gender: a study of green school students in Surakarta, Indonesia

NASA Astrophysics Data System (ADS)

Fakhrudin, I. A.; Karyanto, P.; Ramli, M.

2018-05-01

The environmental problems faced today have had a great impact on human beings. The root causes of all environmental problems are related to injudicious human behavior. Since human behavior is determined by Behavioral Intention (BI), it is crucial to examine the role of BI with regard to the study of environmentally friendly behavior. As such, in this research, BI was scrutinized; in particular, this study aimed to identify the factors affecting the particular degree of BI from the perspective of gender. This study was conducted with 334 high school student participants in the district of Surakarta, Indonesia. According to the New Ecological Paradigm (NEP) result, the BI possessed by high school students does not sufficiently promote environmentally friendly behavior. This research also found that there is no significant link between BI and gender.

Olive mill wastewater treatment using a simple zeolite-based low-cost method.

PubMed

Aly, Anwar A; Hasan, Yousef N Y; Al-Farraj, Abdullah S

2014-12-01

Olive mill wastewater (OMW), a liquid by-product of the olive oil industry, represents a severe environmental problem owing to its high pollution load. In this study, successive columns containing different types of natural materials were investigated for their OMW treatment efficiency. Passing OMW through three columns of gravel, fine sand, and a mixture of acidified cotton and zeolite (weight:weight ratio of cotton:clinoptilolite of 2:1), followed by treatment with activated charcoal (AC) and lime, was the best treatment in terms of the quality of water obtained. This treatment decreased concentrations of [Formula: see text] , B, K, P, and total fat in OMW by mean percentages of 78.0, 92.4, 66.6, 48.3, and 93.3%, respectively. Furthermore, it decreased OMW turbidity and electric conductivity (EC) by 96.8 and 48.4%, respectively. Most contaminants were removed from the OMW in the cotton/clinoptilolite column owing to the high sorption affinity of clinoptilolite on its active sites. The AC was efficient for organic particle removal; meanwhile, lime was used to raise the pH of the treated OMW (TOMW) from 2.9 to 5.1. This simple method enables us to obtain environmentally friendly TOMW that can be safely used for irrigation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ecological analysis of college women's physical activity and health-related quality of life.

PubMed

Zhang, Tao; Dunn, Jacqueline; Morrow, James; Greenleaf, Christy

2018-03-01

Despite significant health benefits of regular physical activity, over 60 percent of college women do not meet recommended physical activity guidelines to promote their health and health-related quality of life (HRQoL), a comprehensive construct including physical and psychosocial health functioning. The major purpose of this study was to examine the influences of individual (e.g., self-efficacy, enjoyment), social (e.g., family and friend support), and physical environmental factors (e.g., crime safety) on college women's physical activity and HRQoL. Participants were 235 (Mean age = 21.0 years) college women from a public research university located in the southwest region of the United States. They completed validated surveys assessing their perceptions of physical activity, HRQoL, and social ecological factors during the spring semester of 2012. The findings of three multiple linear regressions, entering individual factors first, followed by social and physical environmental factors, revealed that self-efficacy and crime safety were significantly related to physical activity. For HRQoL-physical functioning, significant factors were self-efficacy, enjoyment, and crime safety. Enjoyment was the only factor related to HRQoL-psychosocial functioning. These findings indicated that physical activity professionals need to foster safe environments, enhance self-efficacy, and provide enjoyable activities to promote college women's physical activity and HRQoL.

Etiology of depression: genetic and environmental factors.

PubMed

Saveanu, Radu V; Nemeroff, Charles B

2012-03-01

In summary, depressed patients with a history of childhood trauma may have a distinct depression endophenotype characterized by a specific neurobiology and risk genotype that may be responsive to different treatment strategies than depressed patients without childhood adversity. Based on current findings, treatment strategies should be multimodal and include the following: 1. Psychotherapy that addresses a number of domains, such as emotional regulation, cognitive reframing, careful exploration of past traumatic events, attachment, and interpersonal relationships in a safe and trusting therapeutic environment. 2. The therapy should likely be longer term in order to effectively impact those domains. 3. Pharmacotherapy that will be effective in quieting the body’s hyperresponsiveness to stress and reverse epigenetic modifications induced by trauma and stress. 4. Environmental interventions that provide a support network (maternal care, a positive family environment, the support of a close friend) have all been shown to attenuate the impact of childhood abuse. In addition, there is great potential in the identification of genomic biomarkers to help guide us in the identification of traumatized individuals who are susceptible to depression. These indices may also help identify those for whom the immediate provision of treatment may have a preventive effect and may someday guide us in the development of novel pharmacologic approaches.

Enviro-Friendly Hydrogen Generation from Steel Mill-Scale via Metal-Steam Reforming

ERIC Educational Resources Information Center

Azad, Abdul-Majeed; Kesavan, Sathees

2006-01-01

An economically viable and environmental friendly method of generating hydrogen for fuel cells is by the reaction of certain metals with steam, called metal-steam reforming (MSR). This technique does not generate any toxic by-products nor contributes to the undesirable greenhouse effect. From the standpoint of favorable thermodynamics, total…

Primary Schools Eco-Friendly Education in the Frame of Education for Sustainable Development

ERIC Educational Resources Information Center

Prabawani, Bulan; Hanika, Ita Musfirowati; Pradhanawati, Ari; Budiatmo, Agung

2017-01-01

A research on primary school education in the frame of education for sustainable development, as known as ESD, is important because the awareness of eco-friendly activities and environment empowerment cannot be developed in a short time. Meanwhile, human activities have caused significant environmental degradation. This is an exploratory study…

Going Green: Environmentally Friendly Schools Pay Off

ERIC Educational Resources Information Center

LaFee, Scott

2008-01-01

The notion of campuses that are energy-efficient and ecologically friendly, and that provide a healthy, productive, comfortable environment for students and staff has been around for some time. But for many educators, green schools have remained more good intention than proven approach, a huge risk that few school leaders could--or would--take.…

Convergent spray process for environmentally friendly coatings

NASA Technical Reports Server (NTRS)

Scarpa, Jack

1995-01-01

Conventional spray application processes have poor transfer efficiencies, resulting in an exorbitant loss in materials, solvents, and time. Also, with ever tightening Environmental Protection Agency (EPA) regulations and Occupational Safety and Health Administration requirements, the low transfer efficiencies have a significant impact on the quantities of materials and solvents that are released into the environment. High solids spray processes are also limited by material viscosities, thus requiring many passes over the surface to achieve a thickness in the 0.125 -inch range. This results in high application costs and a negative impact on the environment. Until recently, requirements for a 100 percent solid sprayable, environmentally friendly, lightweight thermal protection system that can be applied in a thick (greater than 0.125 inch) single-pass operation exceeded the capability of existing systems. Such coatings must be applied by hand lay-up techniques, especially for thermal and/or fire protection systems. The current formulation of these coatings has presented many problems such as worker safety, environmental hazards, waste, high cost, and application constraints. A system which can apply coatings without using hazardous materials would alleviate many of these problems. Potential applications include the aerospace thermal protective specialty coatings, chemical and petroleum industries that require fire-protection coatings that resist impact, chemicals, and weather. These markets can be penetrated by offering customized coatings applied by automated processes that are environmentally friendly.

Measured Environmental Contributions to Cannabis Abuse/Dependence in an Offspring of Twins Design

PubMed Central

Scherrer, Jeffrey F.; Grant, Julia D.; Duncan, Alexis E.; Pan, Hui; Waterman, Brian; Jacob, Theodore; Haber, Jon Randolph; True, William R.; Heath, Andrew C.; Bucholz, Kathleen Keenan

2008-01-01

Genetic and environmental factors are known to contribute to cannabis abuse/dependence (CAD). We sought to determine the magnitude of the contribution from measured environmental variables to offspring cannabis dependence in a design that controls for familial vulnerability. Data come from a study of 725 twin members of the Vietnam Era Twin Registry, 720 of their biological offspring (age 18–32 years) and 427 mothers. Data were obtained on offspring perception of family and peer support and substance use behaviors and offspring CAD. After adjusting for familial risk, and environmental covariates, CAD was significantly more likely among male offspring (OR=2.73; 95% CI: 1.69–4.41). Offspring CAD was associated with reporting: siblings used illicit drugs (OR=3.40; 95%CI:1.81–6.38), a few friends used drugs (OR=2.72; 95%CI: 1.04–7.09), a quarter or more friends used drugs (OR=8.30; 95% CI:3.09–22.33) and one-half or more 12th grade peers used drugs (OR=3.17; 95%CI: 1.42–7.08). Perceived sibling, friend and school peer substance use are strongly associated with CAD in young adults even after accounting for latent familial risk and for multiple measured intra-family and extra-family environmental influences. PMID:18583065

Characterization of Encapsulated Corrosion Inhibitors Containing Microparticles for Environmentally Friendly Smart Coatings

NASA Technical Reports Server (NTRS)

Pearman, Benjamin Pieter; Calle, Luz M.

2015-01-01

This poster presents the results obtained from experiments designed to evaluate the release properties, as well as the corrosion inhibition effectiveness, of several encapsulated corrosion inhibitors. Microencapsulation has been used in the development of environmentally friendly multifunctional smart coatings. This technique enables the incorporation of autonomous corrosion detection, inhibition and self-healing functionalities into many commercially available coating systems. Select environmentally friendly corrosion inhibitors were encapsulated in organic and inorganic pH-sensitive microparticles and their release in basic solutions was studied. The release rate results showed that the encapsulation can be tailored from fast, for immediate corrosion protection, to slow, which will provide continued long-term corrosion protection. The incorporation of several corrosion inhibitor release profiles into a coating provides effective corrosion protection properties. To investigate the corrosion inhibition efficiency of the encapsulated inhibitors, electrochemical techniques were used to obtain corrosion potential, polarization curve and polarization resistance data. These measurements were performed using the free as well as the encapsulated inhibitors singly or in combinations. Results from these electrochemical tests will be compared to those obtained from weight loss and other accelerated corrosion experiments.

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

NASA Technical Reports Server (NTRS)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The release of the inhibitors from the microparticles in basic solution was studied. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, incorporated directly and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Facile and environmentally friendly synthesis of ultrathin nickel hydroxide nanosheets with excellent supercapacitor performances

NASA Astrophysics Data System (ADS)

Hu, Xiaowei; Liu, Sheng; Li, Chenghui; Huang, Jiahao; Luv, Jixing; Xu, Pan; Liu, Jian; You, Xiao-Zeng

2016-06-01

In this article, we report a facile and environmentally friendly glutamic acid-assisted hydrothermal strategy for the preparation of ultrathin two-dimensional (2D) β-Ni(OH)2 nanosheets with a thickness of about 2 nm, which exhibit a maximum specific capacitance of 2537.4 F g-1 at a current density of 1 A g-1, even at 10 A g-1, the specific capacitance is still maintained at 2290.0 F g-1 with 77.6% retention after 3000 cycles.In this article, we report a facile and environmentally friendly glutamic acid-assisted hydrothermal strategy for the preparation of ultrathin two-dimensional (2D) β-Ni(OH)2 nanosheets with a thickness of about 2 nm, which exhibit a maximum specific capacitance of 2537.4 F g-1 at a current density of 1 A g-1, even at 10 A g-1, the specific capacitance is still maintained at 2290.0 F g-1 with 77.6% retention after 3000 cycles. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr02912d

Achieving over 9.8% Efficiency in Nonfullerene Polymer Solar Cells by Environmentally Friendly Solvent Processing.

PubMed

Wu, Yue; Zou, Yan; Yang, Hang; Li, Yaowen; Li, Hongkun; Cui, Chaohua; Li, Yongfang

2017-10-25

Nowadays, most of the solution-processed high-efficiency polymer solar cell (PSC) devices are fabricated by halogenated solvents (such as chlorobenzene, 1,2-dichlorobenzene, chloroform, etc.) which are harmful to people and the environment. Therefore, it is essential to develop high-efficiency PSC devices processed by environmentally friendly solvent processing for their industrialization. In this regard, we report a new alkylthio chain-based conjugated polymer PBDB-TS as donor material for environmentally friendly solvent-processed PSCs. PBDB-TS possesses a low-lying HOMO energy level at -5.42 eV and a good solubility in toluene and o-xylene. By using o-xylene and 1% N-methylpyrrolidone as processing solvent, following by the thermal annealing treatment for PBDB-TS:ITIC blend films, well-developed morphological features, and balanced charge transport properties are observed, leading to a high power conversion efficiency (PCE) of 9.85%, higher than that of the device cast from halogenated solvent (PCE = 9.65%). The results suggest that PBDB-TS is an attractive donor material for nonhalogen solvents-processing PSCs.

Phage Therapy and Photodynamic Therapy: Low Environmental Impact Approaches to Inactivate Microorganisms in Fish Farming Plants

PubMed Central

Almeida, Adelaide; Cunha, Ângela; Gomes, Newton C.M.; Alves, Eliana; Costa, Liliana; Faustino, Maria A.F.

2009-01-01

Owing to the increasing importance of aquaculture to compensate for the progressive worldwide reduction of natural fish and to the fact that several fish farming plants often suffer from heavy financial losses due to the development of infections caused by microbial pathogens, including multidrug resistant bacteria, more environmentally-friendly strategies to control fish infections are urgently needed to make the aquaculture industry more sustainable. The aim of this review is to briefly present the typical fish farming diseases and their threats and discuss the present state of chemotherapy to inactivate microorganisms in fish farming plants as well as to examine the new environmentally friendly approaches to control fish infection namely phage therapy and photodynamic antimicrobial therapy. PMID:19841715

ERC Membership/Boards

Science.gov Websites

SRC Engineering Research Center for Environmentally Benign Semiconductor Manufacturing (ERC ) ** Bringing Sustainability to Semiconductor Manufacturing ** A multi-university research center leading the way to environmentally friendly semiconductor manufacturing, sponsored by the Semiconductor Research

UNLV’s environmentally friendly Science and Engineering Building is monitored for earthquake shaking

USGS Publications Warehouse

Kalkan, Erol; Savage, Woody; Reza, Shahneam; Knight, Eric; Tian, Ying

2013-01-01

The University of Nevada Las Vegas’ (UNLV) Science and Engineering Building is at the cutting edge of environmentally friendly design. As the result of a recent effort by the U.S. Geological Survey’s National Strong Motion Project in cooperation with UNLV, the building is now also in the forefront of buildings installed with structural monitoring systems to measure response during earthquakes. This is particularly important because this is the first such building in Las Vegas. The seismic instrumentation will provide essential data to better understand the structural performance of buildings, especially in this seismically active region.

Application of supercritical water to decompose brominated epoxy resin and environmental friendly recovery of metals from waste memory module.

PubMed

Li, Kuo; Xu, Zhenming

2015-02-03

Waste Memory Modules (WMMs), a particular kind of waste printed circuit board (WPCB), contain a high amount of brominated epoxy resin (BER), which may bring a series of environmental and health problems. On the other hand, metals like gold and copper are very valuable and are important to recover from WMMs. In the present study, an effective and environmental friendly method using supercritical water (SCW) to decompose BER and recover metals from WMMs was developed instead of hydrometallurgy or pyrometallurgy simultaneously. Experiments were conducted under external-catalyst-free conditions with temperatures ranging from 350 to 550 °C, pressures from 25 to 40 MPa, and reaction times from 120 to 360 min in a semibatch-type reactor. The results showed that BER could be quickly and efficiently decomposed under SCW condition, and the mechanism was possibly free radical reaction. After the SCW treatments, the glass fibers and metal foils in the solid residue could be easily liberated and recovered, respectively. The metal recovery rate reached 99.80%. The optimal parameters were determined as 495 °C, 33 MPa, and 305 min on the basis of response surface methodology (RSM). This study provides an efficient and environmental friendly approach for WMMs recycling compared with electrolysis, pyrometallurgy, and hydrometallurgy.

Green Logistics Management

NASA Astrophysics Data System (ADS)

Chang, Yoon S.; Oh, Chang H.

Nowadays, environmental management becomes a critical business consideration for companies to survive from many regulations and tough business requirements. Most of world-leading companies are now aware that environment friendly technology and management are critical to the sustainable growth of the company. The environment market has seen continuous growth marking 532B in 2000, and 590B in 2004. This growth rate is expected to grow to 700B in 2010. It is not hard to see the environment-friendly efforts in almost all aspects of business operations. Such trends can be easily found in logistics area. Green logistics aims to make environmental friendly decisions throughout a product lifecycle. Therefore for the success of green logistics, it is critical to have real time tracking capability on the product throughout the product lifecycle and smart solution service architecture. In this chapter, we introduce an RFID based green logistics solution and service.

Environmentally friendly electroless plating for Ag/TiO2-coated core-shell magnetic particles using ultrasonic treatment.

PubMed

Kim, Soo-Dong; Choe, Won-Gyun; Jeong, Jong-Ryul

2013-11-01

In this work, high-reflectance brilliant white color magnetic microspheres comprising a Fe/TiO2/Ag core-shell structure with a continuous, uniform compact silver layer were successfully fabricated by TiO2-assisted electroless plating in a simple and eco-friendly method. The coating procedure for TiO2 and Ag involved a sol-gel reaction and electroless plating with ultrasound treatment. The electroless plating step was carried out in an eco-friendly manner in a single process without environmentally toxic additives. The TiO2 layer was used as a modification layer between the Fe microspheres and the silver layer to improve adhesion. A continuous and compact silver layer could be formed with a high degree of morphological control by introducing ultrasonication and adjusting the ammonium hydroxide concentration. Copyright © 2013 Elsevier B.V. All rights reserved.

Study questions environmental impact of fuel-cell vehicles

NASA Astrophysics Data System (ADS)

Stafford, Ned

2015-09-01

Fuel-cell electric vehicles are seen by many as an environmentally friendly technology that can reduce greenhousegas emissions by producing no harmful emissions. But a new study has found that overall a fuel cell electric vehicle has about the same negative environmental impact as a luxury sports car.

Genetic and environmental sources of individual religiousness: the roles of individual personality traits and perceived environmental religiousness.

PubMed

Kandler, Christian; Riemann, Rainer

2013-07-01

In the current study, we examined the genetic and environmental sources of the links between individual religiousness and individual personality traits, perceived parental religiousness, and perceived peer religiousness. Data from 870 individuals (incl. 394 twin pairs) were analyzed. Variance in individual religiousness was significantly influenced by genetic effects, environmental influences shared by twins reared together, and individual-specific environmental influences. Individual religiousness showed significant associations with age, sex, specific personality traits (e.g., agreeableness, openness to values), and perceived religiousness of important social interaction partners, such as parents, best friends, and spouses. The links to personality traits were relatively small and primarily genetically mediated. The associations between individual religiousness and parental religiousness were substantial and mediated by shared environmental effects. These links significantly decreased across age accompanying a significant decrease of shared environmental influences on individual religiousness. The correlations between individual religiousness and perceived religiousness of spouses and best friends were relatively moderate but increased with age. These associations were mediated by genetic as well as nonshared environmental sources accompanying an increase of nonshared environmental influences on individual religiousness with age. The results suggest that inter-individual differences in religiousness are due to multiple sources.

The Iron Dog: The Care and Keeping of a Sno-go.

ERIC Educational Resources Information Center

Keller, Rosanne

Part of a series of home literacy readers with conversational text and sketches, this booklet addresses the Alaskan environment, where the snowmobile or sno-go has recently replaced the dogsled and mechanized land travel. Only with safe drivers is this "Iron Dog" one of man's best friends. The good sno-go driver stays off roads, plane…

Creating a Positive Social-Emotional Climate in Your Elementary Physical Education Program

ERIC Educational Resources Information Center

Gagnon, Amy G.

2016-01-01

Creating a positive social-emotional climate must be the backbone of a quality elementary physical education program. The need to belong, have friends, and feel emotionally safe are basic needs everyone has, but meeting these needs in the classroom can be challenging at times. Strategies regarding how to implement a positive social-emotional…

Having Allies Makes a Difference

ERIC Educational Resources Information Center

Pardini, Priscilla

2013-01-01

Milwaukee's gay-friendly Alliance High School was conceived to be a welcoming and confirming school for kids who have been teased and bullied and had their interests marginalized in traditional schools. The result is a group of teens who feel they have found a safe place as they explore who they will be and how they will live the rest of their…

Evaluation of biotechnologies for flexible pavement applications : final report.

DOT National Transportation Integrated Search

2016-12-01

With solid data from environmental scientists supporting climate change there has been a strong push in the industry to look for alternative green or environmentally friendly methods to keep building and maintaining our infrastructure. This col...

Doing Good Again? A Multilevel Institutional Perspective on Corporate Environmental Responsibility and Philanthropic Strategy.

PubMed

Liu, Wei; Wei, Qiao; Huang, Song-Qin; Tsai, Sang-Bing

2017-10-24

This study investigates the relationship between corporate environmental responsibility and corporate philanthropy. Using a sample of Chinese listed firms from 2008 to 2013, this paper examines the role of corporate environmental responsibility in corporate philanthropy and the moderating influence of the institutional environment using multilevel analysis. The results show that corporate eco-friendly events are positively associated with corporate philanthropic strategy to a significant degree. Provincial-level government intervention positively moderate the positive relationship between eco-friendly events and corporate philanthropy and government corruption is negatively moderate the relationship. All these results are robust according to robustness checks. These findings provide a new perspective on corporate philanthropic strategy as a means to obtain critical resources from the government in order to compensate for the loss made on environmental responsibility. Moreover, the institutional environment is proved here to play an important role in corporate philanthropic strategy.

Doing Good Again? A Multilevel Institutional Perspective on Corporate Environmental Responsibility and Philanthropic Strategy

PubMed Central

Liu, Wei; Wei, Qiao; Huang, Song-Qin

2017-01-01

This study investigates the relationship between corporate environmental responsibility and corporate philanthropy. Using a sample of Chinese listed firms from 2008 to 2013, this paper examines the role of corporate environmental responsibility in corporate philanthropy and the moderating influence of the institutional environment using multilevel analysis. The results show that corporate eco-friendly events are positively associated with corporate philanthropic strategy to a significant degree. Provincial-level government intervention positively moderate the positive relationship between eco-friendly events and corporate philanthropy and government corruption is negatively moderate the relationship. All these results are robust according to robustness checks. These findings provide a new perspective on corporate philanthropic strategy as a means to obtain critical resources from the government in order to compensate for the loss made on environmental responsibility. Moreover, the institutional environment is proved here to play an important role in corporate philanthropic strategy. PMID:29064451

Fashion design solutions for environmentally conscious consumers

NASA Astrophysics Data System (ADS)

Wagner, M.; Chen, Y.; Curteza, A.; Thomassey, S.; Perwuelz, A.; Zeng, X.

2017-10-01

This paper intends to give an overview of the design solutions in fashion for environmentally conscious consumers, presenting green and ethical practices in contemporary clothing design. The results introduce the concept of slow fashion and discuss available fashion design solutions, giving most prominent examples of sustainable products and brands, these contain one or more design features. By this, the discussion extracts the main contemporary ideas. The presented examples of current offers are all envisioning less impact on the environment and society. Sustainable design solutions use more environmentally friendly materials such as organic cotton, incorporate circular design or design for recycling, e.g., replacing button closures with alternative closing possibilities or leather labels with printed versions, or ensure long product life through durability, among other methods. There are differing designs due to creators’ individuality. This overview can be beneficial for the future development of new solutions for more environmentally friendly fashion.

Conceptual Design of Environmentally Friendly Rotorcraft - A Comparison of NASA and ONERA Approaches

NASA Technical Reports Server (NTRS)

Russell, Carl; Basset, Pierre-Marie

2015-01-01

In 2011, a task was initiated under the US-French Project Agreement on rotorcraft studies to collaborate on design methodologies for environmentally friendly rotorcraft. This paper summarizes the efforts of that collaboration. The French and US aerospace agencies, ONERA and NASA, have their own software toolsets and approaches to rotorcraft design. The first step of this research effort was to understand how rotorcraft impact the environment, with the initial focus on air pollution. Second, similar baseline helicopters were developed for a passenger transport mission, using NASA and ONERA rotorcraft design software tools. Comparisons were made between the designs generated by the two tools. Finally, rotorcraft designs were generated targeting reduced environmental impact. The results show that a rotorcraft design that targets reduced environmental impact can be significantly different than one that targets traditional cost drivers, such as fuel burn and empty weight.

Environmental Action Guide for New York City Schools.

ERIC Educational Resources Information Center

Advocates for Children of New York, Inc., Long Island City.

The purpose of this guide is to inform parents, advocates, and school personnel about existing laws and resources available to ensure that every child and every school employee has an environmentally safe and healthy school that is clean and in good repair. An environmentally safe and healthy school is one of the principles adopted by the New York…

Uncertainty propagation in life cycle assessment of biodiesel versus diesel: global warming and non-renewable energy.

PubMed

Hong, Jinglan

2012-06-01

Uncertainty information is essential for the proper use of life cycle assessment and environmental assessments in decision making. To investigate the uncertainties of biodiesel and determine the level of confidence in the assertion that biodiesel is more environmentally friendly than diesel, an explicit analytical approach based on the Taylor series expansion for lognormal distribution was applied in the present study. A biodiesel case study demonstrates the probability that biodiesel has a lower global warming and non-renewable energy score than diesel, that is 92.3% and 93.1%, respectively. The results indicate the level of confidence in the assertion that biodiesel is more environmentally friendly than diesel based on the global warming and non-renewable energy scores. Copyright © 2011 Elsevier Ltd. All rights reserved.

Environmental characteristics comparison of Li-ion batteries and Ni-MH batteries under the uncertainty of cycle performance.

PubMed

Yu, Yajuan; Wang, Xiang; Wang, Dong; Huang, Kai; Wang, Lijing; Bao, Liying; Wu, Feng

2012-08-30

An environmental impact assessment model for secondary batteries under uncertainty is proposed, which is a combination of the life cycle assessment (LCA), Eco-indicator 99 system and Monte Carlo simulation (MCS). The LCA can describe the environmental impact mechanism of secondary batteries, whereas the cycle performance was simulated through MCS. The composite LCA-MCS model was then carried out to estimate the environmental impact of two kinds of experimental batteries. Under this kind of standard assessment system, a comparison between different batteries could be accomplished. The following results were found: (1) among the two selected batteries, the environmental impact of the Li-ion battery is lower than the nickel-metal hydride (Ni-MH) battery, especially with regards to resource consumption and (2) the lithium ion (Li-ion) battery is less sensitive to cycle uncertainty, its environmental impact fluctuations are small when compared with the selected Ni-MH battery and it is more environmentally friendly. The assessment methodology and model proposed in this paper can also be used for any other secondary batteries and they can be helpful in the development of environmentally friendly secondary batteries. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

5th Conference on Aerospace Materials, Processes, and Environmental Technology

NASA Technical Reports Server (NTRS)

Cook, M. B. (Editor); Stanley, D. Cross (Editor)

2003-01-01

Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

Learning, Knowing and Being in the World: Postformalism, Einstein, and Lessons from a Kid Named Larry

ERIC Educational Resources Information Center

Steinberg, Shirley

2009-01-01

I describe how Joe Kincheloe experienced learning from a peer during his pre-school life only to see how his friend was unable to succeed at school. Joe's commitment to empowered cognition was grounded first, by his friend, Larry's mentorship--teaching him the environmental nuances of the mountains in rural Tennessee, and secondly, the…

Journeys of Mike and Wayland: Reflections on a Friend and Mentor

ERIC Educational Resources Information Center

Gifford, Paul

2010-01-01

According to the author, Mike was his close friend and also his mentor. Mike helped him find his way into teaching and he drew him into traditional winter camping. His first winter camping experience was with Mike 16 years ago in Killbear Provincial Park, near Parry Sound. Mike was thinking up Community Environmental Leadership Program (CELP) way…

A Procedure for Setting Environmentally Safe Total Maximum Daily Loads (TMDLs) for Selenium

Treesearch

A. Dennis Lemly

2002-01-01

This article presents a seven-step procedure for developing environmentally safe total maximum daily loads (TMDLs) for selenium. The need for this information stems from recent actions taken by the U.S. Environmental Protection Agency (EPA) that may require TMDLs for selenium and other contaminants that are impairing water bodies. However, there is no technical...

Isomerization of glucose into fructose by environmentally friendly Fe/β zeolite catalysts.

PubMed

Xu, Siquan; Zhang, Lei; Xiao, Kehao; Xia, Haian

2017-06-29

Herein, the environmentally friendly Fe/β zeolite for glucose isomerization to fructose in aqueous media was reported for the first time. The effects of various reaction conditions including reaction temperature, reaction time, catalyst dosage, etc. on the isomerization reaction over Fe/β zeolite were studied in detail. Under the optimized conditions, yield of fructose higher than 20% were obtained. Moreover, the Fe/β zeolite catalysts were stable and remained constant catalytic activity after five consecutive runs. The possible active Fe species for isomerization of glucose in Fe/β zeolite is also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmentally Friendly Corrosion Preventative Compounds

NASA Technical Reports Server (NTRS)

Calle, Luz Marina; Montgomery, Eliza; Kolody, Mark; Curran, Jerry; Back, Teddy; Balles, Angela

2012-01-01

The objective of the Ground Systems Development and Operations Program Environmentally Friendly Corrosion Protective Coatings and Corrosion Preventive Compounds (CPCs) project is to identify, test, and develop qualification criteria for the use of environmentally friendly corrosion protective coatings and CPCs for flight hardware and ground support equipment. This document is the Final Report for Phase I evaluations, which included physical property, corrosion resistance, and NASA spaceport environment compatibility testing and analysis of fifteen CPC types. The CPCs consisted of ten different oily film CPCs and five different wax or grease CPC types. Physical property testing encompassed measuring various properties of the bulk CPCs, while corrosion resistance testing directly measured the ability of each CPC material to protect various metals against corrosion. The NASA spaceport environment compatibility testing included common tests required by NASA-STD-6001, "Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion". At the end of Phase I, CPC materials were down-selected for inclusion in the next test phases. This final report includes all data and analysis of results obtained by following the experimental test plan that was developed as part of the project. Highlights of the results are summarized by test criteria type.

Release Properties and Electrochemical Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

NASA Technical Reports Server (NTRS)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows for the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The total inhibitor content and the release of one of the inhibitors from the microparticles in basic solution was measured. Particles with inhibitor contents of up 60 wt% were synthesized. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, both as the pure materials and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Moral intensity and climate-friendly food choices.

PubMed

Mäkiniemi, Jaana-Piia; Vainio, Annukka

2013-07-01

By changing individual food consumption patterns, it might be possible to reduce greenhouse gas emissions associated with climate change. The aim of the current study was to examine how perceptions of the moral intensity of climate change are related to climate friendly-food choices. The participants were 350 Finnish university students in the social and behavioral sciences who completed a questionnaire during class. The results indicated that moral perceptions mainly affected the moral evaluation and intentions to make climate-friendly food choices. We suggest that the results can be used to promote climate-friendly food choices, for example, by increasing the recognition of climate change as a moral imperative and by combining environmental motives with other relevant food choice motives. Copyright © 2013 Elsevier Ltd. All rights reserved.

News from Online: Green Chemistry

ERIC Educational Resources Information Center

Uffelman, Erich S.

2004-01-01

Green chemistry closely relates to energy and environmental problems, and includes the promotion of environmental friendly products and systems within the framework of renewable resources. Various websites on green chemistry are reviewed, one of which lists the 12 commandments of this particular subject.

DESIGNING EFFICIENT, ECONOMIC AND ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES

EPA Science Inventory

A catalytic reforming process has been studied using hierarchical design and simulation calculations. Approximations for the fugitive emissions indicate which streams allow the most value to be lost and which have the highest potential environmental impact. One can use this infor...

Green Synthesis of Nanomaterials: Environmental Aspects

EPA Science Inventory

There is always a search for reliable and environmentally friendly processes to manufacture metal and metal oxide nanoparticles minimizing or even eliminating the use of hazardous chemicals. The only way to develop these “green” processes is to adapt benign synthesis approaches t...

Application of Green Infrastructure for Combined Sewer Overflow, Kansas City, MO

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) encourages communities to adopt environmentally friendly design practices and other “green” management techniques when addressing stormwater control and management. Advanced design concepts such as Low Impact Development (LID) and Gr...

DESIGNING EFFICIENT, ECONOMIC AND ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES

EPA Science Inventory

A catalytic reforming process has been studied using hierarchical design and simulation calculations. Aproximations for the fugitive emissions indicate which streams allow the most value to be lost and which have the highest potential environmental impact. One can use tis inform...

Sustainable Regeneration of Nanoparticle Enhanced Activated Carbon in Water

EPA Science Inventory

The regeneration and reuse of exhausted granular activated carbon (GAC) is an appropriate method for lowering operational and environmental costs. Advanced oxidation is a promising environmental friendly technique for GAC regeneration. The main objective of this research was to ...

POLLUTION PREVENTION: THE ROLE OF ENVIRONMENTAL MANAGEMENT AND INFORMATION

EPA Science Inventory

The theoretical analysis undertaken here addresses the following issues. First we examine whether firms with high intrinsic quality products would choose to produce more or less environmentally friendly products than their competitors. Second, we investigate how the environmen...

FACILITATED CHEMICAL SYNTHESIS UNDER ALTERNATE REACTION CONDITIONS

EPA Science Inventory

The chemical research in the late 1990's witnessed a paradigm shift towards "environmentally-friendly chemistry" more popularly known as "green chemistry" due to the increasing environmental concerns and legislative requirements to curb the release of chemical waste into the atmo...

CHEMICAL SYNTHESIS USING 'GREENER' ALTERNATIVE REACTION CONDITIONS AND MEDIA

EPA Science Inventory

The chemical research during the last decade has witnessed a paradigm shift towards "environmentally-friendly chemistry" more popularly known as "green chemistry" due to the increasing environmental concerns and legislative requirements to curb the release of chemical waste into ...

Dance Movement as a Way to Help Children Affected by War

ERIC Educational Resources Information Center

Levy, Fran J.; Ranjbar, Azita; Dean, Colleen Hearn

2006-01-01

In the midst of the violence of the 21st century, many children fear that they or someone they know will lose a relative or friend through terrorism. Professionals in dance movement therapy, dance education, and physical education can help children to overcome their fears in order to feel safe and to build self-esteem. This article examines how…

Using What We Know: Supporting the Education of Unaccompanied Homeless Youth

ERIC Educational Resources Information Center

Julianelle, Patricia

2008-01-01

Unaccompanied youth are young people who lack safe, stable housing and who are not in the care of a parent or guardian. They may have run away from home or been forced to leave by their parents. Unaccompanied youth live in a variety of temporary situations, including shelters, the homes of friends or relatives, cars, campgrounds, public parks,…

Responsible Management and Use of a Personal Take-Home Naloxone Supply: A Pilot Project

ERIC Educational Resources Information Center

McAuley, Andrew; Lindsay, George; Woods, Maureen; Louttit, Derek

2010-01-01

Aims: To assess if Scottish drug users, their family and friends could be trained in critical incident management and the safe and effective administration of naloxone. The project also sought to monitor whether drug users can manage their own personal take-home naloxone (THN) supply and use it appropriately in an emergency opiate overdose…

Out and Ignored: Why Are so Many School Libraries Reluctant to Embrace Gay Teens?

ERIC Educational Resources Information Center

Whelan, Debra Lau

2006-01-01

According to the 2003 National School Climate Survey, a biannual study by the Gay, Lesbian, and Straight Education Network, an organization which ensures safe schools for lesbian, gay, bisexual, and transgendered (LGBT) students, only 50 percent of students say they have access to community LGBT Web sites, such as Parents, Families, and Friends of…

Fictive kinship as it mediates learning, resiliency, perseverance, and social learning of inner-city high school students of color in a college physics class

NASA Astrophysics Data System (ADS)

Alexakos, Konstantinos; Jones, Jayson K.; Rodriguez, Victor H.

2011-12-01

In this hermeneutic study we explore how fictive kinship (kin-like close personal friendship) amongst high school students of color mediated their resiliency, perseverance, and success in a college physics class. These freely chosen, processual friendships were based on emotional and material support, motivation, and caring for each other, as well as trust, common interests, and goals. Such close bonds contributed in creating a safe and supportive emotional space and allowed for friendly, cooperative competition within the physics classroom. Friends became the role models, source of support, and motivation for the fictive kinship group as well as for each other, as the group became the role model, source of support, and motivation for the individuals in it. Because of their friendships with one another, physics talk was extended and made part of their personal interactions outside the classroom. These social relationships and safe spaces helped the students cope and persevere despite their initial conflicting expectations of their success in physics. Our research thus expands on the concept of social learning by exploring student friendships and how they frame and mediate such a process.

SOME PROBLEMS OF "SAFE DOSE" ESTIMATION

EPA Science Inventory

In environmental carcinogenic risk assessment, the usually defined "safe doses" appear subjective in some sense. n this paper a method of standardizing "safe doses" based on some objective parameters is introduced and a procedure of estimating safe doses under the competing risks...

[Using SWOT to analyze breastfeeding education results in a medical center].

PubMed

Lee, Pei-Shan; Huang, Chiu-Mieh

2005-08-01

The breastfeeding rate within the first month after postpartum dropped from 95% in 1962 to 25% in 1989. As a result, the Department of Health, Executive Yuan, has made a lot of effort to promote a baby-friendly hospital policy since 2001, with the aim of increasing the breastfeeding rate. However, many studies have pointed out that the Department of Health is encountering difficulties when implementing this policy. This study is designed to use the Strengths, Weakness, Opportunities, and Threats (SWOT) Analysis to evaluate the development of breastfeeding education in a certain medical center. We divide those factors that influence the effect of this policy into extrinsic environmental factors and intrinsic environmental factors. The intrinsic environmental factors are the strengths and weaknesses of the baby-friendly hospital policy. The extrinsic environmental factors are the opportunities and threats. The SWOT Matrix is also applied to develop appropriate strategies to take the greatest possible advantage of opportunities available. With the SWOT approach, managers can not only readily extinguish intrinsic advantages from intrinsic disadvantages, but also recognize external opportunities and threats. Furthermore, it assists managers in resolving problems and turning adversity into opportunity. In providing the SWOT analysis, we hope clinical nursing staff will gain a better understanding of the baby-friendly hospital policy and deliver higher quality of health care for postpartum mothers, thus increasing the breastfeeding rate.

Stimuli Responsive/Rheoreversible Hydraulic Fracturing Fluids for Enhanced Geothermal Energy Production (Part I)

NASA Astrophysics Data System (ADS)

Fernandez, C. A.; Jung, H. B.; Shao, H.; Bonneville, A.; Heldebrant, D.; Hoyt, D.; Zhong, L.; Holladay, J.

2014-12-01

Cost-effective yet safe creation of high-permeability reservoirs inside deep crystalline bedrock is the primary challenge for the viability of enhanced geothermal systems and unconventional oil/gas recovery. Current reservoir stimulation processes utilize brute force (hydraulic pressures in the order of hundreds of bar) to create/propagate fractures in the bedrock. Such stimulation processes entail substantial economic costs ($3.3 million per reservoir as of 2011). Furthermore, the environmental impacts of reservoir stimulation are only recently being determined. Widespread concerns about the environmental contamination have resulted in a number of regulations for fracturing fluids advocating for greener fracturing processes. To reduce the costs and environmental impact of reservoir stimulation, we developed an environmentally friendly and recyclable hydraulic fracturing fluid that undergoes a controlled and large volume expansion with a simultaneous increase in viscosity triggered by CO2 at temperatures relevant for reservoir stimulation in Enhanced Geothermal System (EGS). The volume expansion, which will specifically occurs at EGS depths of interest, generates an exceptionally large mechanical stress in fracture networks of highly impermeable rock propagating fractures at effective stress an order of magnitude lower than current technology. This paper will concentrate on the presentation of this CO2-triggered expanding hydrogel formed from diluted aqueous solutions of polyallylamine (PAA). Aqueous PAA-CO2 mixtures also show significantly higher viscosities than conventional rheology modifiers at similar pressures and temperatures due to the cross-linking reaction of PAA with CO2, which was demonstrated by chemical speciation studies using in situ HP-HT 13C MAS-NMR. In addtion, PAA shows shear-thinning behavior, a critical advantage for the use of this fluid system in EGS reservoir stimulation. The high pressure/temperature experiments and their results as well as the CFD modeling are presented in a companion paper.

Creating Age-Friendly Health Systems - A vision for better care of older adults.

PubMed

Mate, Kedar S; Berman, Amy; Laderman, Mara; Kabcenell, Andrea; Fulmer, Terry

2018-03-01

Safe and effective care of older adults is a crucial issue given the rapid growth of the aging demographic, many of whom have complex health and social needs. At the same time, the health care delivery environment is rapidly changing, offering a new set of opportunities to improve care of older adults. We describe the background, evidence-based changes, and testing, scale-up, and spread strategy that are part of the design of the Creating Age-Friendly Health Systems initiative. The goal is to reach 20% of U.S. hospitals and health systems by 2020, with plans to reach additional hospitals and health systems in subsequent years. Copyright © 2017 Elsevier Inc. All rights reserved.

Savvy Schools Are Going Green

ERIC Educational Resources Information Center

St. Gerard, Vanessa

2008-01-01

This article describes how the green phenomenon is spreading, especially among schools, which have found that not only are they being environmentally friendly, they are also saving big money. Green buildings focus on efficiency and renewable energy, water stewardship, environmentally preferable building materials and specifications, waste…

An Environmentally Friendly, Cost-Effective Determination of Lead in Environmental Samples Using Anodic Stripping Voltammetry

ERIC Educational Resources Information Center

Goldcamp, Michael J.; Underwood, Melinda N.; Cloud, Joshua L.; Harshman, Sean

2008-01-01

Contamination of the environment with heavy metals such as lead presents many health risks. Simple, effective, and field-portable methods for the measurement of toxic metals in environmental samples are vital tools for evaluating the risks that these contaminants pose. This article describes the use of new developments in anodic stripping…

Integrating Sustainable Consumption into Environmental Education: A Case Study on Environmental Representations, Decision Making and Intention to Act

ERIC Educational Resources Information Center

Hadjichambis, Andreas Ch.; Paraskeva-Hadjichambi, Demetra; Ioannou, Hara; Georgiou, Yiannis; Manoli, Constantinos C.

2015-01-01

During the last decades, current consumption patterns have been recurrently blamed for rendering both the environment and our lifestyles unsustainable. Young children are considered a critical group in the effort to make a shift towards sustainable consumption (environmentally friendly consumption). However, young people should be able to consider…

The Role of Green Chemistry Activities in Fostering Secondary School Students' Understanding of Acid-Base Concepts and Argumentation Skills

ERIC Educational Resources Information Center

Karpudewan, Mageswary; Roth, Wolff Michael; Sinniah, Devananthini

2016-01-01

In a world where environmental degradation is taking on alarming levels, understanding, and acting to minimize, the individual environmental impact is an important goal for many science educators. In this study, a green chemistry curriculum--combining chemistry experiments with everyday, environmentally friendly substances with a student-centered…

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

NASA Astrophysics Data System (ADS)

Saviano, G.; Ferrini, M.; Benussi, L.; Bianco, S.; Piccolo, D.; Colafranceschi, S.; KjØlbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.; Grassini, S.; Parvis, M.

2018-03-01

Gas detectors for elementary particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This work studies properties of potential eco-friendly gas replacements by computing the physical and chemical parameters relevant for use as detector media, and suggests candidates to be considered for experimental investigation.

A safety app to respond to dating violence for college women and their friends: the MyPlan study randomized controlled trial protocol.

PubMed

Glass, Nancy; Clough, Amber; Case, James; Hanson, Ginger; Barnes-Hoyt, Jamie; Waterbury, Amy; Alhusen, Jeanne; Ehrensaft, Miriam; Grace, Karen Trister; Perrin, Nancy

2015-09-08

Research demonstrates high rates of physical and sexual victimization of women by intimate partners on college campuses (Black et al. 2001). College women in abusive relationships must weigh complex factors (health, academics, economics, and social stigma) during critical decision-making regarding the relationship. Rather than access formal support systems (e.g., campus security, administrators, counselors), research indicates abused college women most often turn to informal networks; specifically friends (Perspect Psychiatr Care 41:162-171, 2005), who often lack the knowledge or resources to provide effective support (Nurs Res 54(4):235-242, 2005). Decision aids have been shown to assist with health-related decisions by improving knowledge, creating realistic expectations, and resolving decisional conflict (Cochrane Database Syst Rev 1:1-332, 2014). This study is a randomized controlled trial testing the effectiveness of an interactive safety decision aid web-based and smartphone application (App) for abused college women and their friends. Three hundred female college students experiencing abuse and three hundred friends of female college students experiencing abuse will be recruited in Maryland and Oregon and randomized to either the intervention safety decision aid, accessible by website or smartphone App, or a usual safety planning control website/App. The intervention App allows users to enter information on: a) relationship health; b) safety priorities; and c) severity of violence/danger in relationship. The App uses this information to provide personalized safety planning information and resources. Self-reported outcome measures for abused college women on safety seeking behaviors, decisional conflict, IPV exposure and mental health will be collected at baseline, six, and 12-months post-baseline via the study App/website. Outcomes measured for friends are IPV awareness, confidence to intervene, supportive behaviors and decisional conflict. Protocols for safely recruiting, retaining and collecting data from abused women via web/App are discussed. This trial may provide important information on the impact of an App and web-based safety planning tool on college women's decisional conflict and safety behavior use when making difficult safety decisions. This study is the first, to our knowledge, to test an intervention that engages friends of abused college women. The trial may also inform researchers on the feasibility of safely conducting research with abused women using online recruitment and enrollment methods and collecting data via an App or website. Clinicaltrials.gov ID: NCT02236663.

Recycled sand in lime-based mortars.

PubMed

Stefanidou, M; Anastasiou, E; Georgiadis Filikas, K

2014-12-01

The increasing awareness of the society about safe guarding heritage buildings and at the same time protecting the environment promotes strategies of combining principles of restoration with environmentally friendly materials and techniques. Along these lines, an experimental program was carried out in order to investigate the possibility of producing repair, lime-based mortars used in historic buildings incorporating secondary materials. The alternative material tested was recycled fine aggregates originating from mixed construction and demolition waste. Extensive tests on the raw materials have been performed and mortar mixtures were produced using different binding systems with natural, standard and recycled sand in order to compare their mechanical, physical and microstructure properties. The study reveals the improved behavior of lime mortars, even at early ages, due to the reaction of lime with the Al and Si constituents of the fine recycled sand. The role of the recycled sand was more beneficial in lime mortars rather than the lime-pozzolan or lime-pozzolan-cement mortars as a decrease in their performance was recorded in the latter cases due to the mortars' structure. Copyright © 2014 Elsevier Ltd. All rights reserved.

Genome editing in plants: Advancing crop transformation and overview of tools.

PubMed

Shah, Tariq; Andleeb, Tayyaba; Lateef, Sadia; Noor, Mehmood Ali

2018-05-07

Genome manipulation technology is one of emerging field which brings real revolution in genetic engineering and biotechnology. Targeted editing of genomes pave path to address a wide range of goals not only to improve quality and productivity of crops but also permit to investigate the fundamental roots of biological systems. These goals includes creation of plants with valued compositional properties and with characters that confer resistance to numerous biotic and abiotic stresses. Numerous novel genome editing systems have been introduced during the past few years; these comprise zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and clustered regularly interspaced short palindromic repeats/Cas9 (CRISPR/Cas9). Genome editing technique is consistent for improving average yield to achieve the growing demands of the world's existing food famine and to launch a feasible and environmentally safe agriculture scheme, to more specific, productive, cost-effective and eco-friendly. These exciting novel methods, concisely reviewed herein, have verified themselves as efficient and reliable tools for the genetic improvement of plants. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Direct growth of high crystallinity graphene from water-soluble polymer powders

NASA Astrophysics Data System (ADS)

Chen, Qiao; Zhong, Yujia; Huang, Meirong; Zhao, Guoke; Zhen, Zhen; Zhu, Hongwei

2018-07-01

The use of solid-state carbon sources is effective to produce graphene by safe and low-cost chemical vapor deposition (CVD) process. Water-soluble polymers are generally environmentally friendly and have great potential on large-scale green production of graphene. Here, we systematically study the growth of graphene from water-soluble polymers on copper foils. Two different conversion ways are adopted to investigate the growth mechanism of graphene from water-soluble polymers. We find that the metal-binding functional group hydroxyl strongly influences the vaporization of water-soluble polymers on Cu foils, which hinders the formation of graphene films by rapid thermal treatment. In direct CVD process using water-soluble polymer powders as precursors, oxygenated functional groups in polymers can enhance the crystallinity of as-grown graphene in contrast to solid hydrocarbons without containing oxygen (e.g. polyethylene). Large and continuous graphene films of high quality are synthesized from polyvinyl alcohol and polyethylene glycol. Nitrogen doping in graphene can be easily realized by using nitrogen-containing water-soluble polymers (e.g. polyvinyl pyrrolidone).

Ion spectrometric detection technologies for ultra-traces of explosives: a review.

PubMed

Mäkinen, Marko; Nousiainen, Marjaana; Sillanpää, Mika

2011-01-01

In recent years, explosive materials have been widely employed for various military applications and civilian conflicts; their use for hostile purposes has increased considerably. The detection of different kind of explosive agents has become crucially important for protection of human lives, infrastructures, and properties. Moreover, both the environmental aspects such as the risk of soil and water contamination and health risks related to the release of explosive particles need to be taken into account. For these reasons, there is a growing need to develop analyzing methods which are faster and more sensitive for detecting explosives. The detection techniques of the explosive materials should ideally serve fast real-time analysis in high accuracy and resolution from a minimal quantity of explosive without involving complicated sample preparation. The performance of the in-field analysis of extremely hazardous material has to be user-friendly and safe for operators. The two closely related ion spectrometric methods used in explosive analyses include mass spectrometry (MS) and ion mobility spectrometry (IMS). The four requirements-speed, selectivity, sensitivity, and sampling-are fulfilled with both of these methods. Copyright © 2011 Wiley Periodicals, Inc.

Dynamic optical tags

NASA Astrophysics Data System (ADS)

Griggs, Steven P.; Mark, Martin B.; Feldman, Barry J.

2004-07-01

The goal of the DARPA Dynamic Optical Tags (DOTs) program is to develop a small, robust, persistent, 2-way tagging, tracking and locating device that also supports communications at data rates greater than 100 kbps and can be interrogated at significant range. These tags will allow for two-way data exchange and tagging operations in friendly and denied areas. The DOTs will be passive and non-RF. To accomplish this, the DOTs program will develop small, thin, retro-reflecting modulators. The tags will operate for long periods of time (greater than two months) in real-world environmental conditions (-40° to +70° C) and allow for a wide interrogation angle (+/-60°). The tags will be passive (in the sleep mode) for most of the time and only become active when interrogated by a laser with the correct code. Once correctly interrogated, the tags will begin to modulate and retro-reflect the incoming beam. The program will also develop two tag specific transceiver systems that are eye-safe, employ automated scanning algorithms, and are capable of short search and interrogate times.

In-situ regeneration of activated carbon with electric potential swing desorption (EPSD) for the H2S removal from biogas.

PubMed

Farooq, M; Almustapha, M N; Imran, M; Saeed, M A; Andresen, John M

2018-02-01

In-situ regeneration of a granular activated carbon was conducted for the first time using electric potential swing desorption (EPSD) with potentials up to 30 V. The EPSD system was compared against a standard non-potential system using a fixed-bed reactor with a bed of 10 g of activated carbon treating a gas mixture with 10,000 ppm H 2 S. Breakthrough times, adsorption desorption volume, capacities, effect of regeneration and desorption kinetics were investigated. The analysis showed that desorption of H 2 S using the new EPSD system was 3 times quicker compared with the no potential system. Hence, physical adsorption using EPSD over activated carbon is efficient, safe and environmental friendly and could be used for the in-situ regeneration of granular activated carbon without using a PSA and/or TSA system. Additionally, adsorption and desorption cycles can be obtained with a classical two column system, which could lead towards a more efficient and economic biogas to biomethane process. Copyright © 2017 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerczak, Tyler J.; Smith, Kurt R.; Petrie, Christian M.

Tristructural-isotropic (TRISO)–coated particle fuel is a promising advanced fuel concept consisting of a spherical fuel kernel made of uranium oxide and uranium carbide, surrounded by a porous carbonaceous buffer layer and successive layers of dense inner pyrolytic carbon (IPyC), silicon carbide (SiC) deposited by chemical vapor , and dense outer pyrolytic carbon (OPyC). This fuel concept is being considered for advanced reactor applications such as high temperature gas-cooled reactors (HTGRs) and molten salt reactors (MSRs), as well as for accident-tolerant fuel for light water reactors (LWRs). Development and implementation of TRISO fuel for these reactor concepts support the US Departmentmore » of Energy (DOE) Office of Nuclear Energy mission to promote safe, reliable nuclear energy that is sustainable and environmentally friendly. During operation, the SiC layer serves as the primary barrier to metallic fission products and actinides not retained in the kernel. It has been observed that certain fission products are released from TRISO fuel during operation, notably, Ag, Eu, and Sr [1]. Release of these radioisotopes causes safety and maintenance concerns.« less

Friends and social contexts as unshared environments: a discordant sibling analysis of obesity- and health-related behaviors in young adolescents.

PubMed

Salvy, S-J; Feda, D M; Epstein, L H; Roemmich, J N

2017-04-01

This study examines the contribution of best friends' weight and the peer social context (time spent alone versus with friends) as sources of unshared environment associated with variability in weight and health behaviors among weight-discordant siblings. Pairs of same-sex biologic siblings (N=40 pairs; ages 13-17) were originally recruited as part of a study evaluating putative factors contributing to differences in adiposity among weight-discordant siblings. Siblings were asked to bring their best friends to the laboratory and siblings and friends' height and weight were objectively measured. Siblings also completed multi-pass dietary recalls to assess energy intake and sugar sweetened beverage (SSB) consumption. Siblings' physical activity was measured using accelerometry. Experience sampling methodology was used to assess sedentary behaviors/screen time and the number of occasions siblings spent alone and in the presence of friends. Multilevel models were used to estimate the relationships between predictors (best friends' zBMI, time spent alone or with friends) and outcomes (siblings' zBMI and obesity-related health behaviors). Best friends' zBMI was the best predictor of participants' zBMI, even when controlling for child's birth weight. Best friends' weight (zBMI) further predicted participants' SSB intake and time engaged in sedentary behaviors. Being active with friends was positively associated with participants' overall physical activity, whereas spending time alone was negatively associated with accelerometer counts regardless of siblings' adiposity. A friends' weight and the social context are unshared environmental factors associated with variability in adiposity among biologically-related weight-discordant siblings.

Environmentally Responsible Redox Chemistry: An Example of Convenient Oxidation Methodology without Chromium Waste

ERIC Educational Resources Information Center

Crumbie, Robyn L.

2006-01-01

The reactions use recyclable Magtrieve as the oxidant in a simple reaction sequence illustrating the reciprocity of oxidation and reduction processes. The reciprocity of oxidation and reduction reactions are explored while undertaking the reactions in an environmentally friendly manner.

Packaging produced from natural fibers and mycelium: Optimizing biomass blends to meet performance specifications

USDA-ARS?s Scientific Manuscript database

Polystyrene is non-biodegradable and has environmental issues associated with its disposal. A replacement for polystyrene that is biodegradable, environmentally friendly, and has similar performance characteristics is of interest to many ecologically minded companies and consumers. This study utiliz...

The Productivity Dynamics of China's Environmentally Friendly Production Technologies in terms of Wastewater Treatment Techniques

PubMed Central

Yang, Fuxia; Xu, Jiangchuan

2018-01-01

Low economic profit usually reduces the incentive of producers to operate their wastewater treatment technologies effectively. It is necessary to investigate the performance of environmentally friendly production technologies that reduce wastewater discharges and generate economic outputs simultaneously (EPTWs) in China over the past decade. In this paper, we apply the Malmquist-Luenberger productivity index widely used in the field of economics to evaluate the productivity change of EPTWs for 30 administrative provinces in China during 2003–2015. The pathways of the productivity change are further identified by decomposing the productivity index into two components: technological change and technical efficiency change. The results show that China's environmental productivity index associated with wastewater reduction had undergone a downward trend, and evident spatial disparities are observed among the 30 provincial regions. Moreover, the changes of China's environmental productivity over the whole studied period can mainly be attributed to technological progress, while the technical efficiency component has contributed little, although its annual contributing rate is in an increasing trend. PMID:29789803

Integrating environment into land-use planning through strategic environmental assessment in China: Towards legal frameworks and operational procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao Tang; Tan Zhu; He Xu

China currently put forwards 'striving to build an environmentally friendly society' as one of the most important development goals. The land administration authorities are facing the challenge of effectively incorporating environment considerations into their planning system. This paper aims to investigate why and how Strategic Environmental Assessment (SEA) is enacted as an effective tool to integrate the environment into land-use planning during the construction process of an environmentally friendly society in China, and identify factors that influence the integration. It presents characteristics of the land-use planning system, and reviews the progress and current state of SEA in China. Results showmore » that SEA provides many benefits in promoting environmental considerations into the land-use planning process. The legal frameworks and operational procedures, in the context of land-use master planning SEA, are summarized and an assessment made of their effectiveness. Some barriers are highlighted through examination of the latest case studies, and several recommendations are presented to overcome these obstacles.« less

Overlapping genetic and environmental influences among men's alcohol consumption and problems, romantic quality and social support.

PubMed

Salvatore, J E; Prom-Wormley, E; Prescott, C A; Kendler, K S

2015-08-01

Alcohol consumption and problems are associated with interpersonal difficulties. We used a twin design to assess in men the degree to which genetic or environmental influences contributed to the covariance between alcohol consumption and problems, romantic quality and social support. The sample included adult male-male twin pairs (697 monozygotic and 487 dizygotic) for whom there were interview-based data on: alcohol consumption (average monthly alcohol consumption in the past year); alcohol problems (lifetime alcohol dependence symptoms); romantic conflict and warmth; friend problems and support; and relative problems and support. Key findings were that genetic and unique environmental factors contributed to the covariance between alcohol consumption and romantic conflict; genetic factors contributed to the covariance between alcohol problems and romantic conflict; and common and unique environmental factors contributed to the covariance between alcohol problems and friend problems. Recognizing and addressing the overlapping genetic and environmental influences that alcohol consumption and problems share with romantic quality and other indicators of social support may have implications for substance use prevention and intervention efforts.

Green primaries: Environmentally friendly energetic complexes

PubMed Central

Huynh, My Hang V.; Hiskey, Michael A.; Meyer, Thomas J.; Wetzler, Modi

2006-01-01

Primary explosives are used in small quantities to generate a detonation wave when subjected to a flame, heat, impact, electric spark, or friction. Detonation of the primary explosive initiates the secondary booster or main-charge explosive or propellant. Long-term use of lead azide and lead styphnate as primary explosives has resulted in lead contamination at artillery and firing ranges and become a major health hazard and environmental problem for both military and civilian personnel. Devices using lead primary explosives are manufactured by the tens of millions every year in the United States from primers for bullets to detonators for mining. Although substantial synthetic efforts have long been focused on the search for greener primary explosives, this unresolved problem has become a “holy grail” of energetic materials research. Existing candidates suffer from instability or excessive sensitivity, or they possess toxic metals or perchlorate. We report here four previously undescribed green primary explosives based on complex metal dianions and environmentally benign cations, (cat)2[MII(NT)4(H2O)2] (where cat is NH4+ or Na+, M is Fe2+ or Cu2+, and NT− is 5-nitrotetrazolato-N2). They are safer to prepare, handle, and transport than lead compounds, have comparable initiation efficiencies to lead azide, and offer rapid reliable detonation comparable with lead styphnate. Remarkably, they possess all current requirements for green primary explosives and are suitable to replace lead primary explosives in detonators. More importantly, they can be synthesized more safely, do not pose health risks to personnel, and cause much less pollution to the environment. PMID:16567623

Environmentally Friendly Solution to Ground Hazards in Design of Bridges in Earthquake Prone Areas Using Timber Piles

NASA Astrophysics Data System (ADS)

Sadeghi, H.

2015-12-01

Bridges are major elements of infrastructure in all societies. Their safety and continued serviceability guaranties the transportation and emergency access in urban and rural areas. However, these important structures are subject to earthquake induced damages in structure and foundations. The basic approach to the proper support of foundations are a) distribution of imposed loads to foundation in a way they can resist those loads without excessive settlement and failure; b) modification of foundation ground with various available methods; and c) combination of "a" and "b". The engineers has to face the task of designing the foundations meeting all safely and serviceability criteria but sometimes when there are numerous environmental and financial constrains, the use of some traditional methods become inevitable. This paper explains the application of timber piles to improve ground resistance to liquefaction and to secure the abutments of short to medium length bridges in an earthquake/liquefaction prone area in Bohol Island, Philippines. The limitations of using the common ground improvement methods (i.e., injection, dynamic compaction) because of either environmental or financial concerns along with the abundance of timber in the area made the engineers to use a network of timber piles behind the backwalls of the bridge abutments. The suggested timber pile network is simulated by numerical methods and its safety is examined. The results show that the compaction caused by driving of the piles and bearing capacity provided by timbers reduce the settlement and lateral movements due to service and earthquake induced loads.

Greening America's Communities

EPA Pesticide Factsheets

Technical assistance program to help cities and towns develop an implementable vision of distinctive, environmentally friendly neighborhoods using green infrastructure and other sustainable design strategies.

Development of bio-sourced binder to metal injection moulding

NASA Astrophysics Data System (ADS)

Royer, Alexandre; Barrière, Thierry; Gelin, Jean-Claude

2016-10-01

In the MIM process the binder play the most important role. It provides fluidity of the feedstock mixture for injection molding and adhesion of the powder to keep the molded shape. The binder must provide strength and cohesion for the molded part, must be easy to be removed from the molded part, and must be the recyclable, environmentally friendly and economical ones. The goal of this study is to develop a binder environmentally friendly. For this, a study of formulation based on polyethylene glycol, because of is water debinding properties, was made. Polylactic acid and Polyhydroxyalkanoates were investigated as bio sourced polymers. The chemical, miscibility and rheological behavior of the binder formulation were investigated.

Choice of organic foods is related to perceived consequences for human health and to environmentally friendly behaviour.

PubMed

Magnusson, Maria K; Arvola, Anne; Hursti, Ulla Kaisa Koivisto; Aberg, Lars; Sjödén, Per-Olow

2003-04-01

We designed a questionnaire concerned with attitudes and behaviour towards organic foods, environmentally friendly behaviour (EFB), and perceived consequences of organic food choice in terms of human health, the environment and animal welfare. It was mailed in 1998 to a random nation-wide sample of 2000 Swedish citizens, ages 18-65 years, and 1154 (58%) responded. Self-reported purchase of organic foods was most strongly related to perceived benefit for human health. Performance of EFBs such as refraining from car driving was also a good predictor of purchase frequency. The results indicate that egoistic motives are better predictors of the purchase of organic foods than are altruistic motives.

Milestones in chloroplast genetic engineering: an environmentally friendly era in biotechnology.

PubMed

Daniell, Henry; Khan, Muhammad S; Allison, Lori

2002-02-01

Chloroplast genomes defied the laws of Mendelian inheritance at the dawn of plant genetics, and continue to defy the mainstream approach to biotechnology, leading the field in an environmentally friendly direction. Recent success in engineering the chloroplast genome for resistance to herbicides, insects, disease and drought, and for production of biopharmaceuticals, has opened the door to a new era in biotechnology. The successful engineering of tomato chromoplasts for high-level transgene expression in fruits, coupled to hyper-expression of vaccine antigens, and the use of plant-derived antibiotic-free selectable markers, augur well for oral delivery of edible vaccines and biopharmaceuticals that are currently beyond the reach of those who need them most.

On the choice of farm management practices after the reform of the Common Agricultural Policy in 2003.

PubMed

Schmid, Erwin; Sinabell, Franz

2007-02-01

The Common Agricultural Policy (CAP) was fundamentally reformed in 2003. From 2005, farmers will receive decoupled income support payments instead of production premiums if basic standards for environment, food safety, animal health and welfare are met. Farmers are likely to adjust production and management practices to the new policy framework. We describe how this reform fits into the EU strategy of making agricultural production more environmentally friendly by concentrating on the financial aspects of the reforms. Using an agricultural sector model for Austria, we show that the reform will further decrease agricultural outputs, reduce farm inputs, lessen nitrogen surpluses and make environmentally friendly management practices more attractive for farmers.

Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).

PubMed

Villar-Navarro, Mercedes; Martín-Valero, María Jesús; Fernández-Torres, Rut Maria; Callejón-Mochón, Manuel; Bello-López, Miguel Ángel

2017-02-15

An easy and environmental friendly method, based on the use of magnetic molecular imprinted polymers (mag-MIPs) is proposed for the simultaneous extraction of the 16 U.S. EPA polycyclic aromatic hydrocarbons (PAHs) priority pollutants. The mag-MIPs based extraction protocol is simple, more sensitive and low organic solvent consuming compared to official methods and also adequate for those PAHs more retained in the particulate matter. The new proposed extraction method followed by HPLC determination has been validated and applied to different types of water samples: tap water, river water, lake water and mineral water. Copyright © 2017 Elsevier B.V. All rights reserved.

Development and Evaluation of a Leaflet for Concerned Family Members and Friends: "It's Safe to Talk about Suicide"

ERIC Educational Resources Information Center

Owens, Christabel; Charles, Nigel

2017-01-01

Objectives: Significant others can play a key role in suicide prevention, but little attention has been given to the resources they may need in order to do so effectively. Based on previous qualitative research and working in partnership with suicide prevention charities, we developed a simple educational leaflet to help family members and friends…

New porous monolithic membranes based on supported ionic liquid-like phases for oil/water separation and homogenous catalyst immobilisation.

PubMed

Porcar, Raúl; Nuevo, Daniel; García-Verdugo, Eduardo; Lozano, Pedro; Sanchez-Marcano, José; Burguete, M Isabel; Luis, Santiago V

2018-03-07

Porous monolithic advanced functional materials based on supported ionic liquid-like phase (SILLP) systems were used for the preparation of oleophilic and hydrophobic cylindrical membranes and successfully tested as eco-friendly and safe systems for oil/water separation and for the continuous integration of catalytic and separation processes in an aqueous-organic biphasic reaction system.

Causes of Climate and Environmental Changes: The Need for Environmental-Friendly Education Policy in Nigeria

ERIC Educational Resources Information Center

Nwankwoala, H. N. L.

2015-01-01

Man cannot naturally be detached from his environment. From time to time, changes in climate and environmental conditions occur as a result of natural and human factors. Obviously, the natural factors are almost beyond human control. But, the human factors are to a very large extent under human control. Thus, this paper tried to discover natural…

Biodegradable and bio-based polymers: future prospects of eco-friendly plastics.

PubMed

Iwata, Tadahisa

2015-03-09

Currently used plastics are mostly produced from petrochemical products, but there is a growing demand for eco-friendly plastics. The use of bio-based plastics, which are produced from renewable resources, and biodegradable plastics, which are degraded in the environment, will lead to a more sustainable society and help us solve global environmental and waste management problems. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

NOVEL STRATEGIES FOR THE SYNTHESIS OF IONIC LIQUIDS IN AN ENVIRONMENTALLY FRIENDLY MANNER

EPA Science Inventory

The collaborative research effort established between the U. S. Environmental Protection Agency (USEPA) and Kreido Laboratories has focused on the development of reaction strategies for the synthesis of chemicals and materials in a green and sustainable manner. One such area of ...

Preparation of Gold Nanoparticles Using Tea: A Green Chemistry Experiment

ERIC Educational Resources Information Center

Sharma, R. K.; Gulati, Shikha; Mehta, Shilpa

2012-01-01

Assimilating green chemistry principles in nanotechnology is a developing area of nanoscience research nowadays. Thus, there is a growing demand to develop environmentally friendly and sustainable methods for the synthesis of nanoparticles that utilize nontoxic chemicals, environmentally benign solvents, and renewable materials to avoid their…

Assignment: Eco-Friendly Campuses.

ERIC Educational Resources Information Center

Calkins, Meg

2002-01-01

Discusses how institutions of higher education can use their campus environments as a teaching tool and laboratory for finding solutions to environmental dilemmas and ensure that their campus operations, including the landscape, are exemplary models of environmental practice--even if it means far fewer expanses of lawn. Includes a list of…

Examining the market potential for natural-gas-powered trucks : barriers and opportunities for promoting environmental sustainability and economic prosperity.

DOT National Transportation Integrated Search

2014-08-01

Over the past decade, public concerns have grown over America's energy use and production. Pushes : towards more environmentally friendly and sustainable sources of energy have moved out of fringe politics : and into mainstream political discourse. A...

Do Procrastination-Friendly Environments Make Students Delay Unnecessarily?

ERIC Educational Resources Information Center

Nordby, Kent; Klingsieck, Katrin; Svartdal, Frode

2017-01-01

Research on procrastination emphasizes trait explanations for unwanted delay, yet environmental factors are most probably significant contributors to the problem. In this paper, we review literature related to the influence of environmental factors on academic procrastination and investigate how such factors may be assessed in facilitating…

Public say food regulatory policies to improve health in Western Australia are important: population survey results.

PubMed

Pollard, Christina M; Daly, Alison; Moore, Michael; Binns, Colin W

2013-10-01

To investigate the level of support among Western Australian adults for food control policies to improve diet, reduce obesity and protect the environment. Attitudes towards government food control policies on food labelling, food advertising, and the supply of environmentally friendly food data were pooled from two Nutrition Monitoring Survey Series telephone surveys of 2,147 adults aged 18-64 years collected in 2009 and 2012. Descriptive and logistic regression analyses were conducted using survey module of STATA 12. The majority of adults believe it is important that government regulates food policy options under consideration: nutrition information on food labels (97% versus 2% who think it is not important); health rating on food labels (95% versus 3%); food advertising (83% versus 11%); and the supply of environmentally friendly food (86% versus 9%). Community perception is that government control or regulation of food labelling, food advertising and the supply of environmentally friendly food is important. Curbing excess weight gain and related disease burden is a public health priority. Australian governments are considering food regulatory interventions to assist the public to improve their dietary intake. These findings should provide reassurance to government officials considering these regulatory measures. © 2013 The Authors. ANZJPH © 2013 Public Health Association of Australia.

Proposals for the mitigation of the environmental impact of clinical laboratories.

PubMed

Lopez, Joseph B; Badrick, Tony

2012-03-24

Laboratories should be aware of the carbon footprint resulting from their activities and take steps to mitigate it as part of their societal responsibilities. Once committed to a mitigation programme, they should announce an environmental policy, secure the support of senior management, initiate documentation, institute a staff training programme, schedule environmental audits and appoint an environmental manager. Laboratories may aspire to be accredited to one of the standards for environmental management, such as the ISO 14000. As environmental and quality issues are linked, the improvement in the environmental management of an organisation will ultimately lead to improved quality system performance. Indeed, environmental management could conceivably come under overall quality management. Although there will be initial costs, good environmental practices can bring savings. Environmental improvement should be based on the 3R concept to reduce, reuse and recycle. Several policy initiatives may be introduced. These include a green purchasing policy for equipment, laboratory furniture and reagents as well as the management of packaging wastes. There are several ways to reduce energy, water usage and wastage. A reduction of test numbers and collection tubes should be attempted. Paper management involves all aspects of 3R. The recycling of solvents and general wastes should be practised where feasible. The construction new laboratories or renovations to existing ones are opportunities to make them more environmentally-friendly. The advocacy of policies to associates and the inclusion of environmentally-friendly conditions on contractors are integral parts of the programme.

Conceptualizing age-friendly community characteristics in a sample of urban elders: an exploratory factor analysis.

PubMed

Smith, Richard J; Lehning, Amanda J; Dunkle, Ruth E

2013-01-01

Accurate conceptualization and measurement of age-friendly community characteristics would help to reduce barriers to documenting the effects on elders of interventions to create such communities. This article contributes to the measurement of age-friendly communities through an exploratory factor analysis of items reflecting an existing US Environmental Protection Agency policy framework. From a sample of urban elders (n = 1,376), we identified 6 factors associated with demographic and health characteristics: access to business and leisure, social interaction, access to health care, neighborhood problems, social support, and community engagement. Future research should explore the effects of these factors across contexts and populations.

Analysis of Environmentally Friendly Refrigerant Options for Window Air Conditioners

DOE PAGES

Bansal, Pradeep; Shen, Bo

2015-03-12

This paper presents a technical assessment of environmentally friendly refrigerants as alternatives to R410A for window air conditioners. The alternative refrigerants that are studied for its replacement include R32, a mixture of R32/R125 with 90%/10% molar concentration, R600a, R290, R1234yf, R1234ze and R134a. Baseline experiments were performed on a window unit charged with R410A. The heat pump design model (HPDM) was modified and calibrated with the baseline data and was used to evaluate the comparative performance of the WAC with alternative refrigerants. The paper discusses the advantages and disadvantages of each refrigerants and their suitability for window air conditioners. Amongmore » all the refrigerants studied, R32 offers the best efficiency and the lowest Global Warming Potential (GWP), and hence its use will result in the overall environmental friendliness.« less

Water soluble nano-scale transient material germanium oxide for zero toxic waste based environmentally benign nano-manufacturing

NASA Astrophysics Data System (ADS)

Almuslem, A. S.; Hanna, A. N.; Yapici, T.; Wehbe, N.; Diallo, E. M.; Kutbee, A. T.; Bahabry, R. R.; Hussain, M. M.

2017-02-01

In the recent past, with the advent of transient electronics for mostly implantable and secured electronic applications, the whole field effect transistor structure has been dissolved in a variety of chemicals. Here, we show simple water soluble nano-scale (sub-10 nm) germanium oxide (GeO2) as the dissolvable component to remove the functional structures of metal oxide semiconductor devices and then reuse the expensive germanium substrate again for functional device fabrication. This way, in addition to transiency, we also show an environmentally friendly manufacturing process for a complementary metal oxide semiconductor (CMOS) technology. Every year, trillions of complementary metal oxide semiconductor (CMOS) electronics are manufactured and billions are disposed, which extend the harmful impact to our environment. Therefore, this is a key study to show a pragmatic approach for water soluble high performance electronics for environmentally friendly manufacturing and bioresorbable electronic applications.

Developing a smartphone interface for the Florida Environmental Public Health Tracking Web portal.

PubMed

Jordan, Melissa; DuClos, Chris; Folsom, John; Thomas, Rebecca

2015-01-01

As smartphone and tablet devices continue to proliferate, it is becoming increasingly important to tailor information delivery to the mobile device. The Florida Environmental Public Health Tracking Program recognized that the mobile device user needs Web content formatted to smaller screen sizes, simplified data displays, and reduced textual information. The Florida Environmental Public Health Tracking Program developed a smartphone-friendly version of the state Web portal for easier access by mobile device users. The resulting smartphone-friendly portal combines calculated data measures such as inpatient hospitalizations and emergency department visits and presents them grouped by county, along with temporal trend graphs. An abbreviated version of the public health messaging provided on the traditional Web portal is also provided, along with social media connections. As a result of these efforts, the percentage of Web site visitors using an iPhone tripled in just 1 year.

Consumer purchase intention towards environmentally friendly vehicles: an empirical investigation in Kuala Lumpur, Malaysia.

PubMed

Afroz, Rafia; Masud, Muhammad Mehedi; Akhtar, Rulia; Islam, Md Ashraful; Duasa, Jarita Bt

2015-10-01

This paper examines whether attitudes towards electric vehicles (ATEVs), subjective norms (SNs) and perceived behavioural control (PBC) have significant associations with consumer purchase intention (PI) and the purchase behaviour of environmentally friendly vehicles (EFVs). The results from the survey questionnaires are analysed using confirmatory factor analysis (CFA) and structural equation modelling (SEM). The findings of this paper indicate that ATEV, SN and PBC significantly influence PI. This finding also indicates that environmental consequence and individual preferences do not influence the PI of the respondents. We found that Malaysian car owners are largely unaware of the greenhouse effects on the environment or attach to it little importance, which is reflected in their PI towards EFVs. The outcomes of this study could help policymakers design programmes to influence attitudes, subjective norms, perceived behavioural control and purchase behaviour to prevent further air pollution and reduce CO2 emissions from the transportation sector.

The cumulative effects of life event, personal and social resources on subjective well-being of elderly widowers.

PubMed

Balaswamy, S; Richardson, V E

2001-01-01

A multidimensional Life Stress Model was used to test the independent contributions of background characteristics, personal resources, life event, and environmental influences on 200 widowers' levels of well-being, measured by the Affect Balance Scale. Stepwise regression analyses revealed that environmental resources were unrelated to negative affect which is influenced more by the life event and personal resource variables. The environmental resource variables, particularly interactions with friends and neighbors, mostly influenced positive affect. The explanatory model for well-being included multiple variables and explained 33 percent of the variance. Although background characteristics had the greatest impact, absence of hospitalization, higher mastery, higher self-esteem, contacts with friends, and interaction with neighbors enhanced well-being. The results support previous speculations on the importance of positive exchanges for positive affect. African-American widowers showed higher levels of well-being than Caucasian widowers did. The results advance knowledge about differences among elderly men.

Towards eco-friendly crop protection: natural deep eutectic solvents and defensive secondary metabolites.

PubMed

Mouden, Sanae; Klinkhamer, Peter G L; Choi, Young Hae; Leiss, Kirsten A

2017-01-01

With mounting concerns over health and environmental effects of pesticides, the search for environmentally acceptable substitutes has amplified. Plant secondary metabolites appear in the horizon as an attractive solution for green crop protection. This paper reviews the need for changes in the techniques and compounds that, until recently, have been the mainstay for dealing with pest insects. Here we describe and discuss main strategies for selecting plant-derived metabolites as candidates for sustainable agriculture. The second part surveys ten important insecticidal compounds, with special emphasis on those involved in human health. Many of these insecticidal metabolites, however, are crystalline solids with limited solubility which might potentially hamper commercial formulation. As such, we introduce the concept of natural deep eutectic solvents for enhancing solubility and stability of such compounds. The concept, principles and examples of green pest control discussed here offer a new suite of environmental-friendly tools designed to promote and adopt sustainable agriculture.

Development and Pilot Testing of a Bilingual Environmental Health Assessment Tool to Promote Asthma-friendly Childcares.

PubMed

Evans-Agnew, Robin A; Postma, Julie; Camacho, Ariana Ochoa; Hershberg, Rachel M; Trujilio, Elsa; Tinajera, Maria

2018-01-01

Childhood marks the highest risk for allergic sensitization to asthma triggers. Hispanic/Latino children are at higher risk for hospitalization for asthma than non-Hispanic White children. Childcare providers lack knowledge about reducing asthma triggers. The purpose of this paper is to describe a community-based participatory research (CBPR) initiative aimed at developing and pilot testing a bilingual walk-through assessment tool for asthma-friendly childcare environments. Ten Latina mothers of children with asthma living in the Pacific Northwest collaborated with research partners to develop and pilot test a Childcare Environmental Health (CEH) assessment walk-through survey.Results and Lessons Learned: The women innovated the survey with photography and structural examinations of stress and provision of basic needs. The survey tool identified environmental threats to asthma in all three childcares surveyed. Parents are well-positioned to build trust with childcare providers, assess asthma triggers, and recommend practical mitigation strategies.

Drinking-Water Standards and Regulations. Volume 2. Manual for 1982-88

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L.K.; Wang, M.H.S.

1988-04-10

The following 11 important documents are compiled for Drinking Water Standards and Regulations: (1) U.S. Environmental Agency Water Programs, National Interim Primary Drinking Water Regulations; (2) New Jersey Safe Drinking Water Act; (3) Summary of New Jersey Drinking Water Standards; (4) U.S. Environmental Protection Agency Safe Drinking Water Act of 1986 Amendments; (5) U.S. Environmental Protection Agency National Primary Drinking Water Standards; (6) Canadian National Health and Welfare Drinking Water Quality Guidelines--Maximum Acceptable Concentrations; (7) U.S. Environmental Protection Agency, National Primary Drinking Water Regulations, Filtration and Disinfection Turbidity, Giardia Lamblia, Viruses, Legionella, and Heterotrophic Bacteria; (8) Public Water Supply Manual--Guidemore » to the Safe Drinking Water Program; (9) Public Water Supply Manual--Emergency Response; (10) U.S. EPA Approved Krofta Chemicals; (11) NY-DOH Approved Krofta Chemicals.« less

How to tell a patient's story? Influence of the case narrative design on the clinical reasoning process in virtual patients.

PubMed

Hege, Inga; Dietl, Anita; Kiesewetter, Jan; Schelling, Jörg; Kiesewetter, Isabel

2018-02-28

Virtual patients (VPs) are narrative-based educational activities to train clinical reasoning in a safe environment. Our aim was to explore the influence of the design of the narrative and level of difficulty on the clinical reasoning process, diagnostic accuracy and time-on-task. In a randomized controlled trial, we analyzed the clinical reasoning process of 46 medical students with six VPs in three different variations: (1) patients showing a friendly behavior, (2) patients showing a disruptive behavior and (3) a version without a patient story. For easy VPs, we did not see a significant difference in diagnostic accuracy. For difficult VPs, the diagnostic accuracy was significantly higher for participants who worked on the friendly VPs compared to the other two groups. Independent from VP difficulty, participants identified significantly more problems and tests for disruptive than for friendly VPs; time on task was comparable for these two groups. The extrinsic motivation of participants working on the VPs without a patient story was significantly lower than for the students working on the friendly VPs. Our results indicate that the measured VP difficulty has a higher influence on the clinical reasoning process and diagnostic accuracy than the variations in the narratives.

40 CFR 35.101 - Environmental programs covered by the subpart.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) of the Safe Drinking Water Act). (5) Underground water source protection (section 1443(b) of the Safe... 104(b)(3) of the Clean Water Act). (17) Wetlands development grants program (section 104(b)(3) of the... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Environmental programs covered by the...

40 CFR 35.101 - Environmental programs covered by the subpart.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) of the Safe Drinking Water Act). (5) Underground water source protection (section 1443(b) of the Safe... 104(b)(3) of the Clean Water Act). (17) Wetlands development grants program (section 104(b)(3) of the... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Environmental programs covered by the...

40 CFR 35.101 - Environmental programs covered by the subpart.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) of the Safe Drinking Water Act). (5) Underground water source protection (section 1443(b) of the Safe... 104(b)(3) of the Clean Water Act). (17) Wetlands development grants program (section 104(b)(3) of the... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Environmental programs covered by the...

Shrinking the food-print: A qualitative study into consumer perceptions, experiences and attitudes towards healthy and environmentally friendly food behaviours.

PubMed

Hoek, A C; Pearson, D; James, S W; Lawrence, M A; Friel, S

2017-01-01

Internationally, there is increasing recognition of the importance of multilevel policies and actions that address healthy and environmentally friendly food behaviours. However it is not yet clear which actions are most suitable to support consumers to adopt both behaviours concurrently. To this end, we undertook a qualitative study to assess consumer perceptions, experiences and attitudes towards healthy and environmentally friendly foods and four target behaviours: reducing overconsumption of food beyond energy needs, reducing consumption of low-nutrient energy dense foods, eating less animal- and more plant-derived foods, and reducing food waste. Online in-depth interviews were held with 29 Australian food shoppers representing different levels of involvement with health and environment in daily food choices. The results indicate that compared to health, the relationship between food and the environment is rarely considered by consumers. The four target food behaviours were primarily associated and motivated by an impact on health, except for not wasting foods. Participants had the most positive attitude and highest motivation for eating less processed and packaged foods, mostly to avoid excessive packaging and 'chemicals' in foods. This was followed by the behaviours reducing food waste and overconsumption. Conversely, there was a predominantly negative attitude towards, and low motivation for, eating less animal-derived products and more plant based foods. Overall, consumers found a joined concept of healthy and environmentally friendly foods an acceptable idea. We recommend that health should remain the overarching principle for policies and actions concerned with shifting consumer behaviours, as this personal benefit appears to have a greater potential to support behaviour change. Future consumer focused work could pay attention to framing behavioural messages, providing intermediate behavioural goals, and a multiple target approach to change habitual behaviours. Copyright © 2016 Elsevier Ltd. All rights reserved.

Environmental Education Saves the Day

ERIC Educational Resources Information Center

Haines, Sarah; Kilpatrick, Cynthia

2007-01-01

At the start of each school year at Oil City Elementary Magnet School in Oil City, Louisiana, eager students ask, "What's our theme this year?" This curiosity comes from their expectations that they will study a different environmental concept each year. Kindergarten classes learn to "Be a Friend to the Earth," followed by life…

Alternative Nonvolatile Residue Analysis with Contaminant Identification Project

NASA Technical Reports Server (NTRS)

Loftin, Kathleen (Compiler); Summerfield, Burton (Compiler); Thompson, Karen (Compiler); Mullenix, Pamela (Compiler); Zeitlin, Nancy (Compiler)

2015-01-01

Cleanliness verification is required in numerous industries including spaceflight ground support, electronics, medical and aerospace. Currently at KSC requirement for cleanliness verification use solvents that environmentally unfriendly. This goal of this project is to produce an alternative cleanliness verification technique that is both environmentally friendly and more cost effective.

Social Environmental Influences on Adolescents' Smoking Progression.

ERIC Educational Resources Information Center

Wang, Min Qi

2001-01-01

Examined data from adolescents who had completed the 1989 Teenage Attitudes and Practices Survey and who were re-interviewed in 1993 to determine social and environmental factors that influenced their smoking progression. Smoking behavior of best friends and smoking beliefs were consistent and significant factors in predicting progression from…

Leaching Environmental Assessment Framework (LEAF) How-To Guide - Understanding the LEAF Approach and How and When to Use It

EPA Science Inventory

This document is intended to present the reader with important technical and decision-making information in a user-friendly format for implementation of the Leaching Environmental Assessment Framework (LEAF)test methods 1313, 1314, 1315, and 1316 for inorganic constituents. The ...

Developing Pro-Environmental Behaviour: Ecotourism Fieldtrip and Experiences

ERIC Educational Resources Information Center

Ting, Ding Hooi; Cheng, Charles Fang Chin

2017-01-01

Purpose: This study aims to assess the effectiveness of a student participatory approach and assessment to achieve an environmentally friendly behaviour and change strategy. Design/methodology/approach Three time-phase studies employed a participatory and experiential case in the form of ecotourism experiential learning and assessment using a…

Resource Recovery and Reuse: Recycled Magnetically Separable Iron-based Catalysts for Phosphate Recovery and Arsenic Removal

EPA Science Inventory

Environmentally friendly processes that aid human and environmental health include recovering, recycling, and reusing limited natural resources and waste materials. In this study, we re-used Iron-rich solid waste materials from water treatment plants to synthesize magnetic iron-o...

C-TEC: Ohio's First All-Green School

ERIC Educational Resources Information Center

Krall, Angie

2009-01-01

In Ohio's Licking County, the Career and Technology Education Centers (C-TEC) is a leader in the green movement. This eco-friendly school incorporates environmental sustainability in all aspects of its programming and is the first Leadership in Energy and Environmental Design (LEED)-certified public building in the state. While eco-friendly…

"When he's around his brothers … he's not so quiet": the private and public worlds of school-aged children with speech sound disorder.

PubMed

McLeod, Sharynne; Daniel, Graham; Barr, Jacqueline

2013-01-01

Children interact with people in context: including home, school, and in the community. Understanding children's relationships within context is important for supporting children's development. Using child-friendly methodologies, the purpose of this research was to understand the lives of children with speech sound disorder (SSD) in context. Thirty-four interviews were undertaken with six school-aged children identified with SSD, and their siblings, friends, parents, grandparents, and teachers. Interview transcripts, questionnaires, and children's drawings were analyzed to reveal that these children experienced the world in context dependent ways (private vs. public worlds). Family and close friends typically provided a safe, supportive environment where children could be themselves and participate in typical childhoods. In contrast, when out of these familiar contexts, the children often were frustrated, embarrassed, and withdrawn, their relationships changed, and they were unable to get their message across in public contexts. Speech-language pathology assessment and intervention could be enhanced by interweaving the valuable insights of children, siblings, friends, parents, teachers, and other adults within children's worlds to more effectively support these children in context. 1. Recognize that children with SSD experience the world in different ways, depending on whether they are in private or public contexts. 2. Describe the changes in the roles of family and friends when children with SSD are in public contexts. 3. Discover the position of the child as central in Bronfenbrenner’s bioecological model. 4. Identify principles of child-friendly research. 5. Recognize the importance of considering the child in context during speech-language pathology assessment and intervention. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

"Boldness be my friend" (Shakespeare; Cymbeline).

PubMed

Altman, Jessica K; Tallman, Martin S

2011-12-15

Au et al report in this issue of Blood that oral arsenic trioxide (ATO) may be safely used in maintenance therapy in acute promyelocytic leukemia (APL). This is a major improvement in convenience given that intravenous (IV)ATO requires daily administration for weeks at a time. In addition, the oral formulation may be less toxic. The time seems right to carefully explore the introduction of oral ATO earlier in treatment of the disease.

Highlights of the Department of the Navy FY 2013 Budget

DTIC Science & Technology

2012-02-01

ability to perform undersea warfare to include high altitude launched torpedo capability, surface warfare and ISR missions make it a critical force...60B and SH-60F helicopters, whose primary mission areas are undersea warfare and surface warfare. This platform will have numerous capability...sensors to detect, localize, classify and identify undersea threats at a safe distance from friendly ships. The Remote Multi-Mission Vehicle provides

"You're Really Gonna Kick Us All Out?" Sustaining Safe Spaces for Community-Based HIV Prevention and Control among Black Men Who Have Sex with Men.

PubMed

Garcia, Jonathan; Parker, Caroline; Parker, Richard G; Wilson, Patrick A; Philbin, Morgan M; Hirsch, Jennifer S

2015-01-01

Black men who have sex with men (BMSM) experience among the highest rates of HIV infection in the United States. We conducted a community-based ethnography in New York City to identify the structural and environmental factors that influence BMSMs vulnerability to HIV and their engagement with HIV prevention services. Methods included participant observation at community-based organizations (CBOs) in New York City, in-depth interviews with 31 BMSM, and 17 key informant interviews. Our conceptual framework shows how creating and sustaining safe spaces could be a critical environmental approach to reduce vulnerability to HIV among BMSM. Participant observation, in-depth and key informant interviews revealed that fear and mistrust characterized men's relation to social and public institutions, such as churches, schools, and the police. This fear and mistrust created HIV vulnerability among the BMSM in our sample by challenging engagement with services. Our findings suggest that to be successful, HIV prevention efforts must address these structural and environmental vulnerabilities. Among the CBOs that we studied, "safe spaces" emerged as an important tool for addressing these environmental vulnerabilities. CBOs used safe spaces to provide social support, to address stigma, to prepare men for the workforce, and to foster a sense of community among BMSM. In addition, safe spaces were used for HIV and STI testing and treatment campaigns. Our ethnographic findings suggest that safe spaces represent a promising but so far under-utilized part of HIV prevention infrastructure. Safe spaces seem integral to high impact comprehensive HIV prevention efforts, and may be considered more appropriately as part of HIV capacity-building rather than being nested within program-specific funding structures.

Place and sexual partnership transition among young American Indian and Alaska native women.

PubMed

Pearson, Cynthia R; Cassels, Susan

2014-08-01

Multiple challenges expose American Indian and Alaska Native (AIAN) women to high-risk sexual partnerships and increased risk for HIV/STI. Using a unique sample of sexually-active young AIAN women (n = 129), we examined characteristics of last three partners and whether transitional partnerships were associated with different risk profiles, including where partners met, lived, and had sex. Respondents were more likely to have met their previous or current secondary partner (P2) at a friend's or family setting (versus work or social setting) (AOR = 3.92; 95 % CI 1.31, 11.70). Condom use was less likely when meeting a partner at friend's or family settings (AOR = 0.17; 95 % CI 0.05, 0.59). Sexual intercourse with P2 (compared to P1) usually took place in "riskier" settings such as a car, bar, or outside (AOR = 4.15; 95 % CI 1.59, 10.68). Perceived "safe" places, e.g., friend's or family's house, were identified with risky behaviors; thus, homogeneous messaging campaigns may promote a false sense of safety.

Assessment of Environmentally Friendly Refrigerants for Window Air Conditioners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, Pradeep; Shen, Bo

This paper presents technical assessment of environmentally friendly refrigerants for window air conditioners that currently use refrigerant R410A for residential and commercial applications. The alternative refrigerants that are studied for its replacement include R32, R600a, R290, R1234yf, R1234ze and a mixture of R32 (90% molar concentration) and R125 (10% molar concentration). Baseline experiments were performed on a window unit charged with R410A. The ORNL Heat Pump Design Model was calibrated with the baseline data and was used to assess the comparative performance of the WAC with alternative refrigerants. The paper discusses the advantages and disadvantages of each refrigerants and theirmore » suitability for window air conditioners.« less

The Importance of Pro-Environmental Behavior in Adolescent

NASA Astrophysics Data System (ADS)

Palupi, Tyas; Sawitri, Dian R.

2018-02-01

Studies regarding pro-environmental behavior in adolescents are lacking. This study aimed to examine the importance of pro-environmental behavior in adolescents (high school and university students) by conducting literature review from previous studies on pro environmental behavior. Pro-environmental behavior is the behavior of individuals that contributes towards environmental preservation. Based on previous studies, measurement of pro-environmental behavior were investigated on several theories, namely theory of planned behavior (TPB) and value, belief, norms (VBN) by using aspects of pro environmental behavior. Young people with critical thinking, and good environmental education, are expected to behave more environmentally friendly for creating a sustainable future.

ECOLOGICAL RESEARCH IN THE OFFICE OF RESEARCH AND DEVELOPMENT U.S. EPA: AN OVERVIEW OF NEW DIRECTIONS

EPA Science Inventory

In virtually every major environmental act, Congress has required that the U.S. Environmental Protection Agency (U.S. EPA) ensure not only that the air be safe to breathe, the water safe to drink, and the food supply free of contamination, but also that the environment be protect...

Safe School Design: A Handbook for Educational Leaders Applying the Principles of Crime Prevention through Environmental Design.

ERIC Educational Resources Information Center

Schneider, Tod; Walker, Hill; Sprague, Jeffrey

This document seeks to synthesize, integrate, and make available to school personnel solid information regarding Crime Prevention through Environmental Design (CPTED). Chapter 1, "The Changed Landscape of School Safety and Security," examines characteristics of safe and unsafe schools, causes of vulnerability, and the role of design and technology…

Safe Detection System for Hydrogen Leaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lieberman, Robert A.; Beshay, Manal

2012-02-29

Hydrogen is an "environmentally friendly" fuel for future transportation and other applications, since it produces only pure ("distilled") water when it is consumed. Thus, hydrogen-powered vehicles are beginning to proliferate, with the total number of such vehicles expected to rise to nearly 100,000 within the next few years. However, hydrogen is also an odorless, colorless, highly flammable gas. Because of this, there is an important need for hydrogen safety monitors that can warn of hazardous conditions in vehicles, storage facilities, and hydrogen production plants. To address this need, IOS has developed a unique intrinsically safe optical hydrogen sensing technology, andmore » has embodied it in detector systems specifically developed for safety applications. The challenge of using light to detect a colorless substance was met by creating chemically-sensitized optical materials whose color changes in the presence of hydrogen. This reversible reaction provides a sensitive, reliable, way of detecting hydrogen and measuring its concentration using light from low-cost LEDs. Hydrogen sensors based on this material were developed in three completely different optical formats: point sensors ("optrodes"), integrated optic sensors ("optical chips"), and optical fibers ("distributed sensors") whose entire length responds to hydrogen. After comparing performance, cost, time-to-market, and relative market need for these sensor types, the project focused on designing a compact optrode-based single-point hydrogen safety monitor. The project ended with the fabrication of fifteen prototype units, and the selection of two specific markets: fuel cell enclosure monitoring, and refueling/storage safety. Final testing and development of control software for these markets await future support.« less

Presidential Green Chemistry Challenge: 2009 Academic Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2009 award winner, Professor Krzysztof Matyjaszewski, developed Atom Transfer Radical Polymerization to make polymers with copper catalysts and environmentally friendly reducing agents.

Peer Network Drinking Predicts Increased Alcohol Use From Adolescence to Early Adulthood After Controlling for Genetic and Shared Environmental Selection

PubMed Central

Cruz, Jennifer E.; Emery, Robert E.; Turkheimer, Eric

2013-01-01

Research consistently links adolescents' and young adults' drinking with their peers' alcohol intake. In interpreting this correlation, 2 essential questions are often overlooked. First, which peers are more important, best friends or broader social networks? Second, do peers cause increased drinking, or do young people select friends whose drinking habits match their own? The present study combines social network analyses with family (twin and sibling) designs to answer these questions via data from the National Longitudinal Study of Adolescent Health. Analysis of peer nomination data from 134 schools (n = 82,629) and 1,846 twin and sibling pairs shows that peer network substance use predicts changes in drinking from adolescence into young adult life even after controlling for genetic and shared environmental selection, as well as best friend substance use. This effect was particularly strong for high-intensity friendships. Although the peer-adolescent drinking correlation is partially explained by selection, the present finding offers powerful evidence that peers also cause increased drinking. PMID:22390657

The Microbiota, Immunoregulation, and Mental Health: Implications for Public Health

PubMed Central

Lowry, Christopher A.; Smith, David G.; Siebler, Philip H.; Schmidt, Dominic; Stamper, Christopher E.; Hassell, James E.; Yamashita, Paula S.; Fox, James H.; Reber, Stefan O.; Brenner, Lisa A.; Hoisington, Andrew J.; Postolache, Teodor T.; Kinney, Kerry A.; Marciani, Dante; Hernandez, Mark; Hemmings, Sian M.J.; Malan-Muller, Stefanie; Wright, Kenneth P.; Knight, Rob; Raison, Charles L.; Rook, Graham A.W.

2016-01-01

The hygiene or “Old Friends” hypothesis proposes that the epidemic of inflammatory disease in modern urban societies stems at least in part from reduced exposure to microbes that normally prime mammalian immunoregulatory circuits and suppress inappropriate inflammation. Such diseases include but are not limited to allergies and asthma; we and others have proposed that the markedly reduced exposure to these old friends in modern urban societies may also increase vulnerability to neurodevelopmental disorders and stress-related psychiatric disorders, such as anxiety and affective disorders, where data are emerging in support of inflammation as a risk factor. Here we review recent advances in our understanding of the potential for old friends, including environmental microbial inputs, to modify risk for inflammatory disease, with a focus on neurodevelopmental and psychiatric conditions. We highlight potential mechanisms, involving bacterially-derived metabolites, bacterial antigens, and helminthic antigens, through which these inputs promote immunoregulation. Though findings are encouraging, significant human subjects research is required to evaluate the potential impact of old friends, including environmental microbial inputs, on biological signatures and clinically meaningful mental health prevention and intervention outcomes. PMID:27436048

Environmental sustainability assessment of hydropower plant in Europe using life cycle assessment

NASA Astrophysics Data System (ADS)

Mahmud, M. A. P.; Huda, N.; Farjana, S. H.; Lang, C.

2018-05-01

Hydropower is the oldest and most common type of renewable source of electricity available on this planet. The end of life process of hydropower plant have significant environmental impacts, which needs to be identified and minimized to ensure an environment friendly power generation. However, identifying the environmental impacts and health hazards are very little explored in the hydropower processing routes despite a significant quantity of production worldwide. This paper highlight the life-cycle environmental impact assessment of the reservoir based hydropower generation system located in alpine and non-alpine region of Europe, addressing their ecological effects by the ReCiPe and CML methods under several impact-assessment categories such as human health, ecosystems, global warming potential, acidification potential, etc. The Australasian life-cycle inventory database and SimaPro software are utilized to accumulate life-cycle inventory dataset and to evaluate the impacts. The results reveal that plants of alpine region offer superior environmental performance for couple of considered categories: global warming and photochemical oxidation, whilst in the other cases the outcomes are almost similar. Results obtained from this study will take part an important role in promoting sustainable generation of hydropower, and thus towards environment friendly energy production.

Conceptualizing Age-Friendly Community Characteristics in a Sample of Urban Elders: An Exploratory Factor Analysis

PubMed Central

Smith, Richard J.; Lehning, Amanda J.; Dunkle, Ruth E.

2012-01-01

Accurate conceptualization and measurement of age-friendly community characteristics would help to reduce barriers to documenting the effects on elders of interventions to create such communities. This article contributes to the measurement of age-friendly communities through an exploratory factor analysis of items reflecting an existing U.S. Environmental Protection Agency policy framework. From a sample of urban elders (n =1,376), we identified six factors associated with demographic and health characteristics: Access to Business and Leisure, Social Interaction, Access to Health Care, Neighborhood Problems, Social Support, and Community Engagement. Future research should explore the effects of these factors across contexts and populations. PMID:23350565

An Educational Tool for Outdoor Education and Environmental Concern

ERIC Educational Resources Information Center

Sandell, Klas; Ohman, Johan

2013-01-01

The purpose of this paper is to suggest an outdoor education model that respects the need to critically discuss the general belief in a causal relationship between experiences of nature, environmentally-friendly attitudes and behavioural change, but that at the same time respects the legitimate claims on the part of outdoor education practice for…

Environmental Educational Youth Action Task Program

ERIC Educational Resources Information Center

Ab Rahman, Nik Norulaini Nik; Omar, Fatehah Mohd; Kalia, Noorliza; Hasmi, Mohammad

2008-01-01

An educational environmental youth camp was held comprising of fifty one 16-year old secondary students and facilitated by volunteers from the university and Friends of the Earth, a non profit organization in Penang. A weekend camp on youth action task program was held at an isolated beach packed with activities that were structured towards…

Hybrid Design of Electric Power Generation Systems Including Renewable Sources of Energy

ERIC Educational Resources Information Center

Wang, Lingfeng; Singh, Chanan

2008-01-01

With the stricter environmental regulations and diminishing fossil-fuel reserves, there is now higher emphasis on exploiting various renewable sources of energy. These alternative sources of energy are usually environmentally friendly and emit no pollutants. However, the capital investments for those renewable sources of energy are normally high,…

Framework for Sustainability Performance Assessment for Manufacturing Processes- A Review

NASA Astrophysics Data System (ADS)

Singh, K.; Sultan, I.

2017-07-01

Manufacturing industries are facing tough competition due to increasing raw material cost and depleting natural resources. There is great pressure on the industry to produce environmental friendly products using environmental friendly processes. To address these issues modern manufacturing industries are focusing on sustainable manufacturing. To develop more sustainable societies, industries need to better understand how to respond to environmental, economic and social challenges. This paper proposed some framework and tools that accelerate the transition towards a sustainable system. The developed framework will be beneficial for sustainability assessment comparing different plans alongside material properties, ultimately helping the manufacturing industries to reduce the carbon emissions and material waste, besides improving energy efficiency. It is expected that this would be highly beneficial for determination of environmental impact of a process at early design stages. Therefore, it would greatly help the manufacturing industries for selection of process plan based on sustainable indices. Overall objective of this paper would have good impact on reducing air emissions and protecting environment. We expect this work to contribute to the development of a standard reference methodology to help further sustainability in the manufacturing sector.

Evaluating Inundation in Urban Drainage Systems in Tamalanrea District Makassar Based Ecodrainase

NASA Astrophysics Data System (ADS)

Alfidhdha, Rizky; Karnaningroem, Nieke

2018-03-01

Makassar City is one of the major cities in Indonesia with a population of approximately 1.7 million inhabitants, which continues to grow and followed the development of urban infrastructure facilities. The development also resulted in adverse effects on the environment, especially for water catchment area turns into a watertight region resulting changes in surface runoff were greater, especially in the rainy season because the drainage coefficient values are increasing as well. The purpose of this study was to analyze the capacity of the capacity of drainage channels in terms of technical aspects, analyze and formulate efforts to address flooding in a drainage channel system environmentally friendly in terms of environmental aspects, and Calculating the cost and benefit the development of the handling of flooding with a drainage channel system environmentally friendly in terms of financial aspects. The results obtained from the analysis of the technical aspects there are 14 of 41 channel capacity is insufficient accommodation capacity, resulting in the analysis of environmental aspects require 867 infiltration wells, and 3.19 rate of Benefit Cost Ratio (BCR).

EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines: Technical Papers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hogan, T.

2011-12-01

The EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines was a component of a larger project. The goal of the overall project was to conduct the final developmental engineering required to advance the commercialization of the Alden turbine. As part of this effort, the conference provided a venue to disseminate information on the status of the Alden turbine technology as well as the status of other advanced turbines and research on environmentally-friendly hydropower turbines. The conference was also a product of a federal Memorandum of Understanding among DOE, USBR, and USACE to share technical information on hydropower. The conference was held inmore » Washington, DC on May 19 and 20, 2011 and welcomed over 100 attendees. The Conference Organizing Committee included the federal agencies with a vested interest in hydropower in the U.S. The Committee collaboratively assembled this conference, including topics from each facet of the environmentally-friendly conventional hydropower research community. The conference was successful in illustrating the readiness of environmentally-enhanced hydropower technologies. Furthermore, the topics presented illustrated the need for additional deployment and field testing of these technologies in an effort to promote the growth of environmentally sustainable hydropower in the U.S. and around the world.« less

Green dentistry, a metamorphosis towards an eco-friendly dentistry: a short communication.

PubMed

Rastogi, Varun; Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

2014-07-01

Dentistry is most importantly and foremost a healing profession. In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards 'Green dentistry'. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution.

Sustainable Decisions Signal Sustainable Relationships: How Purchasing Decisions Affect Perceptions and Romantic Attraction.

PubMed

DiDonato, Theresa E; Jakubiak, Brittany K

2016-01-01

In the pursuit of love, individuals strategically use luxury products to signal status and other attractive attributes. Might eco-friendly products also signal mate-relevant information? The current research examined inferences from eco-friendly purchases and how they predict perceived suitability for short- and long-term romantic relationships. Participants read descriptions of a stranger's eco-friendly or luxury purchase decisions, reported their perceptions of the purchaser, and indicated their potential romantic interest in the purchaser. The influence of the relative price of the chosen product was also investigated. Compared to luxury purchasers, eco-friendly purchasers were ascribed greater warmth, competence, and good partner traits, but less physical appeal, and they were preferred for long-term but not short-term relationships. The social costs and benefits of "going green" are discussed in light of their implications for environmental sustainability efforts.

Recovery of Trace and Heavy Metals from Coal Combustion Residues for Reuse and Safe Disposal: A Review

NASA Astrophysics Data System (ADS)

Kumar, Ashvani; Samadder, Sukha Ranjan; Elumalai, Suresh Pandian

2016-09-01

The safe disposal of coal combustion residues (CCRs) will remain a major public issue as long as coal is used as a fuel for energy production. Both dry and wet disposal methods of CCRs create serious environmental problems. The dry disposal method creates air pollution initially, and the wet disposal method creates water pollution as a result of the presence of trace and heavy metals. These leached heavy metals from fly ash may become more hazardous when they form toxic compounds such as arsenic sulfite (As2S3) and lead nitrate (N2O6Pb). The available studies on trace and heavy metals present in CCRs cannot ensure environmentally safe utilization. In this work, a novel approach has been offered for the retrieval of trace and heavy metals from CCRs. If the proposed method becomes successful, then the recovered trace and heavy metals may become a resource and environmentally safe use of CCRs may be possible.

AN OVERVIEW OF THE U.S. ENVIRONMENTAL PROTECTION AGENCY'S SMALL SYSTEMS RESEARCH AND DEVELOPMENT CENTER AT THE EPA TEST AND EVALUATION FACILITY IN CINCINNATI, OHIO

EPA Science Inventory

The U.S. Environmental Protection Agency (U.S. EPA) landmark Safe Drinking Water Act Amendments of 1996 promised to bring and provide safe drinking water to all Americans. Since that time many have not understood or appreciated EPA involvement in the research and development (...

Subgroups of adolescents differing in physical and social environmental preferences towards cycling for transport: A latent class analysis.

PubMed

Verhoeven, Hannah; Ghekiere, Ariane; Van Cauwenberg, Jelle; Van Dyck, Delfien; De Bourdeaudhuij, Ilse; Clarys, Peter; Deforche, Benedicte

2018-07-01

In order to be able to tailor environmental interventions to adolescents at risk for low levels of physical activity, the aim of the present study is to identify subgroups of adolescents with different physical and social environmental preferences towards cycling for transport and to determine differences in individual characteristics between these subgroups. In this experimental study, 882 adolescents (12-16 years) completed 15 choice tasks with manipulated photographs. Participants chose between two possible routes to cycle to a friend's house which differed in seven physical micro-environmental factors, cycling distance and co-participation in cycling (i.e. cycling alone or with a friend). Latent class analysis was performed. Data were collected from March till October 2016 across Flanders (Belgium). Three subgroups could be identified. Subgroup 1 attached most importance to separation of the cycle path and safety-related aspects. Subgroup 2 attached most importance to being able to cycle together with a friend and had the highest percentage of regular cyclists. In subgroup 3, the importance of cycling distance clearly stood out. This subgroup included the lowest percentage of regular cyclists. Results showed that in order to stimulate the least regular cyclists, and thus also the subgroup most at risk for low levels of active transport, cycling distances should be as short as possible. In general, results showed that providing well-separated cycle paths which enable adolescents to cycle side by side and introducing shortcuts for cyclists may encourage different subgroups of adolescents to cycle for transport without discouraging other subgroups. Copyright © 2018 Elsevier Inc. All rights reserved.

Age-friendly environments and life satisfaction among South Korean elders: person-environment fit perspective.

PubMed

Park, Sojung; Lee, Sangchul

2017-07-01

Drawing on the person-environment (P-E) fit perspective, this study examined the role of environment on the well-being of vulnerable older adults in a non-western context. Using the indicators from the World Health Organization's (WHO) framework for age friendly cities (ACF), we examined life satisfaction among South Korean older adults, exploring the extent to which multidimensional environmental characteristics are associated with low socioeconomic status (SES). Using the regionally representative data from the Seoul City-wide needs assessment of middle- and old-aged adults, an analytic sample (N = 1657) focused on community-living individuals aged 65 and older. Multilevel regression models examined interaction between SES subgroups and varying aspects of the environment (i.e. physical, social, and service environment) as related to life satisfaction. Consistent with the environmental docility hypothesis, members of the most vulnerable subgroup in the Korean context - older adults who are living alone and poor - are more likely to have higher life satisfaction when they have higher levels of support in physical and social environments. Interestingly, a higher level of support in the service environment was related to lower life satisfaction for this subgroup. This study provides an empirical foundation for efforts to identify age-friendly environmental characteristics as modifiable environmental resources that can improve older adults' psychological well-being. As the first attempt to use WHO ACF indicators within the P-E fit perspective in a non-Western context, our study provides a foundation for designing support services or programs that effectively meet the needs of vulnerable older adults.

Remediation of lead and cadmium from simulated groundwater in loess region in northwestern China using permeable reactive barrier filled with environmentally friendly mixed adsorbents.

PubMed

Fan, Chunhui; Gao, Yalin; Zhang, Yingchao; Dong, Wanqing; Lai, Miao

2018-01-01

Permeable reactive barrier (PRB) is potentially effective for groundwater remediation, especially using environmentally friendly mixed fillers in representative areas, such as semi-arid loess region in northwestern China. The mixed materials, including corn straw (agricultural wastes), fly ash (industrial wastes), zeolite synthesized from fly ash (reutilized products), and iron-manganese nodule derived from loess (materials with regional characteristics) in northwestern China, were chosen as PRB media to reduce the contents of lead and cadmium in simulated groundwater. A series of lab-scale column experiments were investigated, and the response surface methodology (RSM) was used to optimize the working process; Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were applied to further reveal the reaction mechanism. It shows that the purification efficiencies are more acceptable when the concentrations of lead and cadmium are approximately 7 and 0.7 mg/L, respectively, at 25 °C in weakly acidic solution, and functional groups of -OH and C=C play an important role for contaminants removal. The mixed adsorbents used are effective to remove lead and cadmium in groundwater. This is the first report on the removal of lead and cadmium from groundwater in loess region in northwestern China using PRB filled with environmentally friendly mixed adsorbents.

An analysis of environmental data transmission

NASA Astrophysics Data System (ADS)

Yuan, Lina; Chen, Huajun; Gong, Jing

2017-05-01

To comprehensively construct environmental automatic monitoring has become the urgent need of environmental management, is a major measure to implement the scientific outlook on development and build a harmonious socialist society, and is an inevitable choice of “building a resource-conserving and environment-friendly society”, which is of great importance and profound significance to adjust the economic structure and transform growth pattern. This article first introduces the importance of environmental data transmission, then expounds the characteristics, key technologies, transmitting mode, and design ideas of environmental data transmission process, and finally, summarizes the full text.

Healthy Home Action Brochure (English)

EPA Pesticide Factsheets

Tips to save energy, save money, protect inhabitants, and make your home more environmentally-friendly. Information on mold, radon, carbon monoxide, asthma/allergies, secondhand smoke, contaminants, lead, mercury, and pesticides.

Alternative energy resources for MoDOT

DOT National Transportation Integrated Search

2011-02-01

This research investigates environmentally friendly alternative energy sources that could be used by MoDOT in various areas, and develops applicable and sustainable strategies to implement those energy sources.

Capturing how age-friendly communities foster positive health, social participation and health equity: a study protocol of key components and processes that promote population health in aging Canadians.

PubMed

Levasseur, Mélanie; Dubois, Marie-France; Généreux, Mélissa; Menec, Verena; Raina, Parminder; Roy, Mathieu; Gabaude, Catherine; Couturier, Yves; St-Pierre, Catherine

2017-05-25

To address the challenges of the global aging population, the World Health Organization promoted age-friendly communities as a way to foster the development of active aging community initiatives. Accordingly, key components (i.e., policies, services and structures related to the communities' physical and social environments) should be designed to be age-friendly and help all aging adults to live safely, enjoy good health and stay involved in their communities. Although age-friendly communities are believed to be a promising way to help aging Canadians lead healthy and active lives, little is known about which key components best foster positive health, social participation and health equity, and their underlying mechanisms. This study aims to better understand which and how key components of age-friendly communities best foster positive health, social participation and health equity in aging Canadians. Specifically, the research objectives are to: 1) Describe and compare age-friendly key components of communities across Canada 2) Identify key components best associated with positive health, social participation and health equity of aging adults 3) Explore how these key components foster positive health, social participation and health equity METHODS: A mixed-method sequential explanatory design will be used. The quantitative part will involve a survey of Canadian communities and secondary analysis of cross-sectional data from the Canadian Longitudinal Study on Aging (CLSA). The survey will include an age-friendly questionnaire targeting key components in seven domains: physical environment, housing options, social environment, opportunities for participation, community supports and healthcare services, transportation options, communication and information. The CLSA is a large, national prospective study representative of the Canadian aging population designed to examine health transitions and trajectories of adults as they age. In the qualitative part, a multiple case study will be conducted in five Canadian communities performing best on positive health, social participation and health equity. Building on new and existing collaborations and generating evidence from real-world interventions, the results of this project will help communities to promote age-friendly policies, services and structures which foster positive health, social participation and health equity at a population level.

Antifouling phenyl ethers and other compounds from the invertebrates and their symbiotic fungi collected from the South China Sea.

PubMed

Wang, Chao-Yi; Wang, Kai-Ling; Qian, Pei-Yuan; Xu, Ying; Chen, Min; Zheng, Juan-Juan; Liu, Min; Shao, Chang-Lun; Wang, Chang-Yun

2016-12-01

Marine organism-derived secondary metabolites are promising potential sources for discovering environmentally safe antifouling agents. In present study, 55 marine secondary metabolites and their synthesized derivatives were tested and evaluated for their antifouling activities and security. These compounds include 44 natural products isolated from marine invertebrates and their symbiotic microorganisms collected from the South China Sea and 11 structural modified products derived from the isolated compounds. The natural secondary metabolites, covering phenyl ether derivatives, terpenoids, 9, 11-secosteroids, anthraquinones, alkaloids, nucleoside derivatives and peptides, were isolated from two corals, one sponge and five symbiotic fungi. All of the isolated and synthesized compounds were tested for their antifouling activities against the cyprids of barnacle Balanus (Amphibalanus) amphitrite Darwin. Noticeably, five phenyl ether derivatives (9, 11, 13-15) exhibited potent anti-larval settlement activity with the EC 50 values lower than 3.05 μM and the LC 50 /EC 50 ratios higher than 15. The study of structure-activity relationship (SAR) revealed that the introduction of acetoxy groups and bromine atoms to phenyl ether derivatives could significantly improve their antifouling activities. This is the first report on the SAR of phenyl ether derivatives on antifouling activity against barnacle B. amphitrite. The polybrominated diphenyl ether derivative, 2, 4, 6, 2', 4', 6'-hexabromo-diorcinol (13), which displayed excellent antifouling activity, was considered as a promising candidate of environmentally friendly antifouling agents.

Colorado Scientists Win National Award

Science.gov Websites

environmentally friendly products, such as biodegradable pesticides and gasoline additives. Dr. Joseph Bozell and manufacture biodegradable herbicides and pesticides and an oxygenate for cleaner burning gasoline. Biomass

Feeling Stressed

MedlinePlus

... Illness & disability Drugs, alcohol & smoking Your feelings Relationships Bullying Safety Your future Environmental health Skip section navigation ( ... weight Problems with friends or other relationships Being bullied Living in a dangerous neighborhood Peer pressure to ...

Environmentally friendly chemoselective oxidation of primary aliphatic amines by using a biomimetic electrocatalytic system.

PubMed

Largeron, Martine; Chiaroni, Angèle; Fleury, Maurice-Bernard

2008-01-01

Environmentally friendly oxidation of primary aliphatic amines to imines has been successfully achieved, under metal-free conditions, by the use of diverse electrogenerated o-azaquinone mediators. High catalytic performance, together with high chemoselectivity, were observed with electron-poor o-azaquinone catalysts generated from 2-aminoresorcinol derivatives. Similar to copper amine oxidase enzymes, these mediators exhibited lower reactivity toward alpha-branched primary amines and no reactivity toward secondary amines. In the case of 3,4-aminophenol derivatives lacking a 2-hydroxy group, the generated o-azaquinone species failed to catalyze the oxidation of the amine to the corresponding imine. Further mechanistic considerations allowed a rationalization of the crucial role of the 2-hydroxy group in converting a catalytically inert species into a highly effective biomimetic catalyst.

Isocyanides Derived from α,α-Disubstituted Amino Acids: Synthesis and Antifouling Activity Assessment.

PubMed

Inoue, Yuki; Takashima, Shuhei; Nogata, Yasuyuki; Yoshimura, Erina; Chiba, Kazuhiro; Kitano, Yoshikazu

2018-03-01

Herein, we contribute to the development of environmentally friendly antifoulants by synthesizing eighteen isocyanides derived from α,α-disubstituted amino acids and evaluating their antifouling activity/toxicity against the cypris larvae of the Balanus amphitrite barnacle. Almost all isocyanides showed good antifouling activity without significant toxicity and exhibited EC 50 values of 0.07 - 7.30 μg/mL after 120-h exposure. The lowest EC 50 values were observed for valine-, methionine-, and phenylalanine-derived isocyanides, which achieved > 95% cypris larvae settlement inhibition at concentrations of less than 30 μg/mL without exhibiting significant toxicity. Thus, the prepared isocyanides should be useful for further research focused on the development of environmentally friendly antifouling agents. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.

PubMed

Abraham, Eldho; Deepa, B; Pothen, L A; Cintil, J; Thomas, S; John, M J; Anandjiwala, R; Narine, S S

2013-02-15

The objective of this work was to develop an environmental friendly method for the effective utilization of coir fibre by adopting steam pre-treatment. The retting of the coconut bunch makes strong environmental problems which can be avoided by this method. Chemical characterization of the fibre during each processing stages confirmed the increase of cellulose content from raw (40%) to final steam treated fibres (93%). Morphological and dynamic light scattering analyses of the fibres at different processing stages revealed that the isolation of cellulose nano fibres occur in the final step of the process as an aqueous suspension. FT-IR and XRD analysis demonstrated that the treatments lead to the gradual removal of lignin and hemicelluloses from the fibres. The existence of strong lignin-cellulose complex in the raw coir fibre is proved by its enhanced thermal stability. Steam explosion has been proved to be a green method to expand the application areas of coir fibre. Copyright © 2012 Elsevier Ltd. All rights reserved.

Environmental services coupled to food products and brands: food companies interests and on-farm accounting.

PubMed

Kempa, Daniela

2013-09-01

Much research has been carried out on governmental support of agri environmental measures (AEM). However, little is known about demands on and incentives from the commercial market for environmental contributions of the farmers. The factors farm structures, level of remuneration and legal framework have been thoroughly investigated. However, demands of the food industry for environmentally friendly goods(1) and their effects on farmers' decisions have not yet been analyzed. Leading companies in the food industry have observed an increasing consumer awareness and, due to higher competition, see an additional need to communicate environmental benefits which result from either organic production methods or agri-environmental measures. To address this research deficit, two case studies were carried out. The first case study is a survey aimed at the industrial food producers' demands with regards to the environmental performance of supplying farms. Concurrently, within a second survey farmers were questioned to find out what conditions are required to implement agri-environmental measures beyond cross compliance and document their environmental performance. This article presents the outcomes of the first case study. The results show that food companies have an interest in the documentation of environmental benefits of supplying farms for their marketing strategies. Provision of support by finance or contract-design is also seen as appropriate tool to promote an environmentally friendly production. In turn the food producers' demand and support for documented environmental services can have a positive influence on farmers' decisions for implementation and documentation of these services. Thus, the surveys provide essential findings for further development of documentation strategies for environmental benefits within the supply chain. Copyright © 2012 Elsevier Ltd. All rights reserved.

U.S. Fish and Wildlife Service Moves toward Net-Zero Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

First they had a vision: welcome people into a building embracing environmental stewardship on land that is steeped in history. The designers of the U.S. Fish and Wildlife Service took this vision and designed a new energy-efficient and environmentally friendly visitor center for the Assabet River National Wildlife Refuge located in Sudbury, Massachusetts.

Preservative-treated wood and alternative products in the Forest Service

Treesearch

James (Scott) Groenier; Stan Lebow

2006-01-01

When treated wood is used in field settings, the possibility of environmental contamination raises concerns. There is increasing pressure to be environmentally friendly and to reduce, restrict, or eliminate the use of wood preservatives because of the concern that toxic constituents may leach from the treated wood. This report will provide an overview of preservative...

2011 Earth Day

NASA Image and Video Library

2011-04-21

Pat Drackett of the Crosby Arboretum in Picayune (l) speaks with Helen Robinson and Arlene Brown, both employees of the Naval Oceanographic Office at Stennis Space Center, during Earth Day 2011 activities April 21. During the day, Stennis employees were able to visit various exhibits featuring environmentally friendly and energy-conscious items and information. The activities were coordinated by the Stennis Environmental Office.

Preservice Teachers' Perception Levels Concerning Consumer Environmental Consciousness

ERIC Educational Resources Information Center

Dikmenli, Yurdal

2017-01-01

People who strive to prevent harm to the environment while utilizing it and to maintain a livable environment is related to educational and cultural values. If we want the next generation to live in an environment as undisturbed as we live in now, environmentally friendly products should be consumed and waste should be prevented. Thus, raising an…

Reconsidering Conceptualisations of Farm Conservation Activity: The Case of Conserving Hay Meadows

ERIC Educational Resources Information Center

Riley, Mark

2006-01-01

Changes to agri-environmental policy, with an emphasis on encouraging more environmentally friendly farming practices, have been paralleled in the last two decades by a body of research into agri-environment scheme adoption. To date much of this research has considered conservation behaviour as a static issue across whole farms, and viewed…

Production of 3-Oxo-2-(2'-pentenyl)-cyclopentane-1-octanoic Acid in the Fungus Aspergillus oryzae: A Step Towards Heterologous Production of Pyrethrins in Fungi.

PubMed

Mohamed, Maged E; Pahirulzaman, Khomaizon A K; Lazarus, Colin M

2016-03-01

Pyrethrins are natural insecticides, which accumulate to high concentrations in pyrethrum (Chrysanthemum cinerariaefolium) flowers. Synthetic pyrethroids are more stable, more efficacious and cheaper, but contemporary requirements for safe and environmentally friendly pesticides encourage a return to the use of natural pyrethrins, and this would be favoured by development of an efficient route to their production by microbial fermentation. The biosynthesis of pyrethrins involves ester linkage between an acid moiety (chrysanthemoyl or pyrethroyl, synthesised via the mevalonic acid pathway from glucose), and an alcohol (pyrethrolone). Pyrethrolone is generated from 3-oxo-2-(2'-pentenyl)-cyclopentane-1-octanoic acid, which originates from α-linolenic acid via the jasmonic acid biosynthetic cascade. The first four genes in this cascade, encoding lipoxygenase 2, allene-oxide synthase, allene-oxide cyclase 2 and 12-oxophytodienoic acid reductase 3, were amplified from an Arabidopsis thaliana cDNA library, cloned in a purpose-built fungal multigene expression vector and expressed in Aspergillus oryzae. HPLC-MS analysis of the transgenic fungus homogenate gave good evidence for the presence of 3-oxo-2-(2'-pentenyl)-cyclopentane-1-octanoic acid.

Hydrate-melt electrolytes for high-energy-density aqueous batteries

NASA Astrophysics Data System (ADS)

Yamada, Yuki; Usui, Kenji; Sodeyama, Keitaro; Ko, Seongjae; Tateyama, Yoshitaka; Yamada, Atsuo

2016-10-01

Aqueous Li-ion batteries are attracting increasing attention because they are potentially low in cost, safe and environmentally friendly. However, their low energy density (<100 Wh kg-1 based on total electrode weight), which results from the narrow operating potential window of water and the limited selection of suitable negative electrodes, is problematic for their future widespread application. Here, we explore optimized eutectic systems of several organic Li salts and show that a room-temperature hydrate melt of Li salts can be used as a stable aqueous electrolyte in which all water molecules participate in Li+ hydration shells while retaining fluidity. This hydrate-melt electrolyte enables a reversible reaction at a commercial Li4Ti5O12 negative electrode with a low reaction potential (1.55 V versus Li+/Li) and a high capacity (175 mAh g-1). The resultant aqueous Li-ion batteries with high energy density (>130 Wh kg-1) and high voltage (˜2.3-3.1 V) represent significant progress towards performance comparable to that of commercial non-aqueous batteries (with energy densities of ˜150-400 Wh kg-1 and voltages of ˜2.4-3.8 V).

Foams for barriers and nonlethal weapons

NASA Astrophysics Data System (ADS)

Rand, Peter B.

1997-01-01

Our times demand better solutions to conflict resolution than simply shooting someone. Because of this, police and military interest in non-lethal concepts is high. Already in use are pepper sprays, bean-bag guns, flash-bang grenades, and rubber bullets. At Sandia we got a head start on non- lethal weapon concepts. Protection of nuclear materials required systems that went way beyond the traditional back vault. Dispensable deterrents were used to allow a graduated response to a threat. Sticky foams and stabilized aqueous foams were developed to provide access delay. Foams won out for security systems simply because you could get a large volume from a small container. For polymeric foams the expansion ratio is thirty to fifty to one. In aqueous foams expansion ratios of one thousand to ne are easily obtained. Recent development work on sticky foams has included a changeover to environmentally friendly solvents, foams with very low toxicity, and the development of non-flammable silicone resin based foams. High expansion aqueous foams are useful visual and aural obscurants. Our recent aqueous foam development has concentrated on using very low toxicity foaming agents combined with oleoresin capsicum irritant to provide a safe but highly irritating foam.

Progress on lipid extraction from wet algal biomass for biodiesel production.

PubMed

Ghasemi Naghdi, Forough; González González, Lina M; Chan, William; Schenk, Peer M

2016-11-01

Lipid recovery and purification from microalgal cells continues to be a significant bottleneck in biodiesel production due to high costs involved and a high energy demand. Therefore, there is a considerable necessity to develop an extraction method which meets the essential requirements of being safe, cost-effective, robust, efficient, selective, environmentally friendly, feasible for large-scale production and free of product contamination. The use of wet concentrated algal biomass as a feedstock for oil extraction is especially desirable as it would avoid the requirement for further concentration and/or drying. This would save considerable costs and circumvent at least two lengthy processes during algae-based oil production. This article provides an overview on recent progress that has been made on the extraction of lipids from wet algal biomass. The biggest contributing factors appear to be the composition of algal cell walls, pre-treatments of biomass and the use of solvents (e.g. a solvent mixture or solvent-free lipid extraction). We compare recently developed wet extraction processes for oleaginous microalgae and make recommendations towards future research to improve lipid extraction from wet algal biomass. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Enhancement of yield, nutritional and nutraceutical properties of two common bean cultivars following the application of seaweed extract (Ecklonia maxima).

PubMed

Kocira, Anna; Świeca, Michał; Kocira, Sławomir; Złotek, Urszula; Jakubczyk, Anna

2018-03-01

In the present study, application of Ecklonia maxima extract (Kelpak SL - a water soluble concentrate) was optimized and its impact on yield, nutraceutical and nutritional potential of Phaseolus vulgaris L. (var. Aura and Toska) was measured. The study was carried out in 2012 and 2013 in Poland. During the growing season, 0.2% and 0.4% solution of Kelpak SL was applied by single and double spraying of plants. These four treatments with Kelpak SL were compared with the control, where no biostimulator was applied. Kelpak SL treatments stimulated the yield of both cultivars studied. The application of E. maxima extract had no effect on the content of starch, free sugars or proteins in seeds of either of the tested cultivars. The highest level of phenolics was found for double sprayed Toska plants. All the tested variants of Kelpak SL application significantly increased the content of anthocyanins in the seeds. Also, both the reducing power and antiradical ability of Aura seeds were elevated in all the studied treatments. E. maxima extract is a natural, environmentally friendly and safe preparation increasing the yield and nutraceutical quality of beans without any negative effect on their nutritional quality.

40 CFR 23.7 - Timing of Administrator's action under Safe Drinking Water Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Safe Drinking Water Act. 23.7 Section 23.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL JUDICIAL REVIEW UNDER EPA-ADMINISTERED STATUTES § 23.7 Timing of Administrator's action under Safe Drinking Water Act. Unless the Administrator otherwise explicitly provides in a particular promulgation...

40 CFR 23.7 - Timing of Administrator's action under Safe Drinking Water Act.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Safe Drinking Water Act. 23.7 Section 23.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL JUDICIAL REVIEW UNDER EPA-ADMINISTERED STATUTES § 23.7 Timing of Administrator's action under Safe Drinking Water Act. Unless the Administrator otherwise explicitly provides in a particular promulgation...

Going green with eco-friendly dentistry.

PubMed

Avinash, Bhagyalakshmi; Avinash, B S; Shivalinga, B M; Jyothikiran, S; Padmini, M N

2013-07-01

Eco-friendly dentistry is currently transforming the medical and dental field to decrease its affect on our natural environment and reduce the amount of waste being produced. Eco-friendly dentistry uses a sustainable approach to encourage dentists to implement new strategies to try and reduce the energy being consumed and the large amount of waste being produced by the industry. Many reasonable, practical and easy alternatives do exist which would reduce the environmental footprint of a dental office were it to follow the 'green' recommendations. Dentist should take a leading role in the society by implementing 'green' initiatives to lessen their impact on the environment. This article provides a series of 'green' recommendations that dentists around the world can implement to become a leading Stewards of the environment.

Presidential Green Chemistry Challenge: 2004 Designing Greener Chemicals Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2004 award winner, Engelhard Corporation, developed a wide range of environmentally friendly Rightfit azo pigments that contain calcium, strontium, or barium instead of heavy metals.

Alternative energy resources for the Missouri Department of Transportation.

DOT National Transportation Integrated Search

2011-01-01

This research investigates environmentally friendly alternative energy sources that could be used by MoDOT in various areas, and develops applicable and sustainable strategies to implement those energy sources.

Patients' Knowledge and Attitude toward the Disposal of Medications

PubMed Central

AlHamdan, Hani; Abualezz, Rayf; Bahadig, Faiz; Abonofal, Noha; Osman, Mohamed

2017-01-01

Background Safe disposal of medications is of high concern as malpractice may lead to harmful consequences such as undesirable effects, prescription drug abuse, overstocking, self-medication, accidental overdose, and even death. There is a lack of uniform and nationwide guidance on how patients should safely dispose their leftover medications. This study aims to assess patients' knowledge and attitude regarding the disposal of medications. Method This research is a cross-sectional study. A self-administered questionnaire was used to collect data from various outpatient pharmaceutical services in King Abdulaziz Medical City (KAMC), Jeddah. Results The study revealed that 73% of the respondents throw the medications in the trash, 14% return the medications to a pharmacy, 5% never dispose them, and 3% donate the medications to a friend or charity centers. More than 80% of the respondents never received any information or advice from healthcare providers about safe and proper disposal of medications. Conclusion Our findings suggest that there is an immediate requirement for the establishment of collaborative and uniform guidelines for the safe disposal of leftover medications. A policy for drug donation needs to be included in routine patient education as well as educational and collective programs for the public. PMID:29130019

Modeling Age-Friendly Environment, Active Aging, and Social Connectedness in an Emerging Asian Economy.

PubMed

Lai, Ming-Ming; Lein, Shi-Ying; Lau, Siok-Hwa; Lai, Ming-Ling

2016-01-01

This paper empirically tested eight key features of WHO guidelines to age-friendly community by surveying 211 informal caregivers and 402 self-care adults (aged 45 to 85 and above) in Malaysia. We examined the associations of these eight features with active aging and social connectedness through exploratory and confirmatory factor analyses. A structural model with satisfactory goodness-of-fit indices (CMIN/df = 1.11, RMSEA = 0.02, NFI = 0.97, TLI = 1.00, CFI = 1.00, and GFI = 0.96) indicates that transportation and housing, community support and health services, and outdoor spaces and buildings are statistically significant in creating an age-friendly environment. We found a statistically significant positive relationship between an age-friendly environment and active aging. This relationship is mediated by social connectedness. The results indicate that built environments such as accessible public transportations and housing, affordable and accessible healthcare services, and elderly friendly outdoor spaces and buildings have to be put into place before social environment in building an age-friendly environment. Otherwise, the structural barriers would hinder social interactions for the aged. The removal of the environmental barriers and improved public transportation services provide short-term solutions to meet the varied and growing needs of the older population.

Modeling Age-Friendly Environment, Active Aging, and Social Connectedness in an Emerging Asian Economy

PubMed Central

Lai, Ming-Ming; Lein, Shi-Ying; Lau, Siok-Hwa; Lai, Ming-Ling

2016-01-01

This paper empirically tested eight key features of WHO guidelines to age-friendly community by surveying 211 informal caregivers and 402 self-care adults (aged 45 to 85 and above) in Malaysia. We examined the associations of these eight features with active aging and social connectedness through exploratory and confirmatory factor analyses. A structural model with satisfactory goodness-of-fit indices (CMIN/df = 1.11, RMSEA = 0.02, NFI = 0.97, TLI = 1.00, CFI = 1.00, and GFI = 0.96) indicates that transportation and housing, community support and health services, and outdoor spaces and buildings are statistically significant in creating an age-friendly environment. We found a statistically significant positive relationship between an age-friendly environment and active aging. This relationship is mediated by social connectedness. The results indicate that built environments such as accessible public transportations and housing, affordable and accessible healthcare services, and elderly friendly outdoor spaces and buildings have to be put into place before social environment in building an age-friendly environment. Otherwise, the structural barriers would hinder social interactions for the aged. The removal of the environmental barriers and improved public transportation services provide short-term solutions to meet the varied and growing needs of the older population. PMID:27293889

Healthy Home Action Card (English)

EPA Pesticide Factsheets

Brief tips to save energy, save money, protect inhabitants, and make your home more environmentally-friendly. Topics include mold, radon, carbon monoxide, asthma, secondhand smoke, indoor air pollution, water safety, lead, and pest control.

Complete Lesson 2: Pesky Pests and Household Hazards

EPA Pesticide Factsheets

Examines environmentally friendly ways to keep our homes and schools pest-free. Defines pests, pesticides, household hazards, chemicals, and toxic, and explores strategies for keeping common household hazards out of reach.

Increased functional properties and thermal stability of flexible cellulose nanocrystal/ZnO films.

PubMed

Lizundia, E; Urruchi, A; Vilas, J L; León, L M

2016-01-20

In this work we attempt to improve the functional properties and thermal stability of cellulose nanocrystal (CNC) films by means of eco-friendly materials and processes. Mechanically flexible films of closely packed CNCs with concentrations up to 5 wt.% of zinc oxide (ZnO) nanoparticles have been prepared by a simple, standard and environmentally friendly method using solely water. Results reveal that ultraviolet light is blocked by 98.5% at 1 wt.% ZnO while good transparency is maintained. A sharp hydrophobicity increase is observed with the addition of ZnO which would enhance the durability of films by decreasing the water diffusion through the material. The thermal degradation activation energy (E) presents an increase of 141%, denoting a high thermal stability of films, which would result beneficial for their potential application in the field of flexible electronics. Mechanical results demonstrate a high structural integrity of CNC/ZnO as a result of the occurring strong cellulosic inter- and intramolecular interactions within the closely packed CNC network. In overall, this work highlights the potential for environmentally friendly processing of sustainable nanostructured functional materials based on cellulose. Copyright © 2015 Elsevier Ltd. All rights reserved.

A user friendly system for ultrasound carotid intima-media thickness image interpretation

NASA Astrophysics Data System (ADS)

Zhu, Xiangjun; Kendall, Christopher B.; Hurst, R. Todd; Liang, Jianming

2011-03-01

Assessment of Carotid Intima-Media Thickness (CIMT) by B-mode ultrasound is a technically mature and reproducible technology. Given the high morbidity, mortality and the large societal burden associated with CV diseases, as a safe yet inexpensive tool, CIMT is increasingly utilized for cardiovascular (CV) risk stratification. However, CIMT requires a precise measure of the thickness of the intima and media layers of the carotid artery that can be tedious, time consuming, and demand specialized expertise and experience. To this end, we have developed a highly user-friendly system for semiautomatic CIMT image interpretation. Our contribution is the application of active contour models (snake models) with hard constraints, leading to an accurate, adaptive and user-friendly border detection algorithm. A comparison study with the CIMT measurement software in Siemens Syngo® Arterial Health Package shows that our system gives a small bias in mean (0.049 +/-0.051mm) and maximum (0.010 +/- 0.083 mm) CIMT measures and offers a higher reproducibility (average correlation coefficients were 0.948 and 0.844 in mean and maximum CIMT respectively (P <0.001)). This superior performance is attributed to our novel interface design for hard constraints in the snake models.

Potential emission savings from refrigeration and air conditioning systems by using low GWP refrigerants

DOE PAGES

Beshr, Mohamed; Aute, Vikrant; Abdelaziz, Omar; ...

2016-08-24

Refrigeration and air conditioning systems have high, negative environmental impacts due to refrigerant charge leaks from the system and their corresponding high global warming potential. Thus, many efforts are in progress to obtain suitable low GWP alternative refrigerants and more environmentally friendly systems for the future. In addition, the system’s life cycle climate performance (LCCP) is a widespread metric proposed for the evaluation of the system’s environmental impact.

Potential emission savings from refrigeration and air conditioning systems by using low GWP refrigerants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beshr, Mohamed; Aute, Vikrant; Abdelaziz, Omar

Refrigeration and air conditioning systems have high, negative environmental impacts due to refrigerant charge leaks from the system and their corresponding high global warming potential. Thus, many efforts are in progress to obtain suitable low GWP alternative refrigerants and more environmentally friendly systems for the future. In addition, the system’s life cycle climate performance (LCCP) is a widespread metric proposed for the evaluation of the system’s environmental impact.

Correlates of socio-economic inequalities in women's television viewing: a study of intrapersonal, social and environmental mediators.

PubMed

Teychenne, Megan; Ball, Kylie; Salmon, Jo

2012-01-20

Socio-economically disadvantaged women are at a greater risk of spending excess time engaged in television viewing, a behavior linked to several adverse health outcomes. However, the factors which explain socio-economic differences in television viewing are unknown. This study aimed to investigate the contribution of intrapersonal, social and environmental factors to mediating socio-economic (educational) inequalities in women's television viewing. Cross-sectional data were provided by 1,554 women (aged 18-65) who participated in the 'Socio-economic Status and Activity in Women study' of 2004. Based on an ecological framework, women self-reported their socio-economic position (highest education level), television viewing, as well as a number of potential intrapersonal (enjoyment of television viewing, preference for leisure-time sedentary behavior, depression, stress, weight status), social (social participation, interpersonal trust, social cohesion, social support for physical activity from friends and from family) and physical activity environmental factors (safety, aesthetics, distance to places of interest, and distance to physical activity facilities). Multiple mediating analyses showed that two intrapersonal factors (enjoyment of television viewing and weight status) and two social factors (social cohesion and social support from friends for physical activity) partly explained the educational inequalities in women's television viewing. No physical activity environmental factors mediated educational variations in television viewing. Acknowledging the cross-sectional nature of this study, these findings suggest that health promotion interventions aimed at reducing educational inequalities in television viewing should focus on intrapersonal and social strategies, particularly providing enjoyable alternatives to television viewing, weight-loss/management information, increasing social cohesion in the neighborhood and promoting friend support for activity.

Environmentally friendly use of non-coal ashes in Sweden.

PubMed

Ribbing, C

2007-01-01

The Swedish Thermal Engineering Research Institute (Värmeforsk) initiated an applied research program "Environmentally friendly use of non-coal ashes", in 2002. The program aims at increasing knowledge on the by-products of energy production and their application. The goal of formulating technical and environmental guidelines and assessments is a major point of the program, which is supported by about forty authorities and private organisations. The programme has been divided into four areas: recycling of ashes to forests, geotechnical applications, use in landfilling, and environmental aspects and chemistry. Among all results obtained, the following progress is shown: *Evidence for the positive effects of spreading ashes on forest growth. *A proposal for environmental guidelines on the utilisation of ashes in construction. *A handbook for using non-coal fly ashes in unpaved roads. *Technical and environmental assessments of MSWI bottom ashes in road construction. *Development of the use of ashes with municipal wastewater sludge as a cover for landfills and mine tailings. *Use of ashes from bio-fuels in concrete and replacement of cement in stoop mining. *A method to classify those by-products from combustion that have mirror entries in the EWC as a hazardous or non-hazardous compound. The Ash Programme has also made it possible to increase knowledge on ashes as valuable materials, on quality assurance and on markets for recovered materials.

Systematic review of reusable versus disposable laparoscopic instruments: costs and safety.

PubMed

Siu, Joey; Hill, Andrew G; MacCormick, Andrew D

2017-01-01

The quality of instruments and surgical expertise in minimally invasive surgery has developed markedly in the last two decades. Attention is now being turned to ways to allow surgeons to adopt more cost-effective and environmental-friendly approaches. This review explores current evidence on the cost and environmental impact of reusable versus single-use instruments. In addition, we aim to compare their quality, functionality and associated clinical outcomes. The Medline and EMBASE databases were searched for relevant literature from January 2000 to May 2015. Subject headings were Equipment Reuse/, Disposable Equipment/, Cholecystectomy/, Laparoscopic/, Laparoscopy/, Surgical Instruments/, Medical Waste Disposal/, Waste Management/, Medical Waste/, Environmental Sustainability/ and Sterilization/. There are few objective comparative analyses between single-use versus reusable instruments. Current evidence suggests that limiting use of disposal instruments to necessity may hold both economical and environmental advantages. Theoretical advantages of single-use instruments in quality, safety, sterility, ease of use and importantly patient outcomes have rarely been examined. Cost-saving methods, environmental-friendly methods, global operative costs, hidden costs, sterilization methods and quality assurance systems vary greatly between studies making it difficult to gain an overview of the comparison between single-use and reusable instruments. Further examination of cost comparisons between disposable and reusable instruments is necessary while externalized environmental costs, instrument function and safety are also important to consider in future studies. © 2016 Royal Australasian College of Surgeons.

Quality of Agricultural Products and Protection of the Environment: Training, Knowledge Dissemination and Certification. Synthesis Report of a Study in Five European Countries. CEDEFOP Reference Series.

ERIC Educational Resources Information Center

Papadaki-Klavdianou, A.; Menkisoglou-Spiroudi, O.; Tsakiridou, E.

This book examines existing European environmental education and agricultural practices friendly to the environment. Focus is on studies conducted in five countries Germany, Greece, the Netherlands, Portugal, and Spain--that aimed to define new knowledge qualifications related to environmental issues in producing alternative agricultural products…

Envisioning Agricultural Sustainability from Field to Plate: Comparing Producer and Consumer Attitudes and Practices toward "Environmentally Friendly" Food and Farming in Washington State, USA

ERIC Educational Resources Information Center

Selfa, Theresa; Jussaume, Raymond A., Jr.; Winter, Michael

2008-01-01

A substantial body of sociological research has examined the relationship between farmers' environmental attitudes and their conservation behaviors, but little research has compared the attitudes of producers and consumers toward the environment with their behaviors or practices in support of sustainable agri-food systems. This paper addresses…

More than Just Playing Outside: A Self-Study on Finding My Identity as an Environmental Educator in Science Education

ERIC Educational Resources Information Center

Gatzke, Jenna M.; Buck, Gayle A.; Akerson, Valarie L.

2015-01-01

The purpose of this study was to investigate the identity conflicts I was experiencing as an environmental educator entering a doctoral program in science education. My inquiry used self-study methodology with a variety of data sources, including sixteen weeks of personal journal entries, audio-recordings of four critical friend meetings, and…

Environmentally friendly ionic liquid-in-water microemulsions for extraction of hydrophilic and lipophilic components from Flos Chrysanthemi.

PubMed

Chen, Jue; Cao, Jun; Gao, Wen; Qi, Lian-Wen; Li, Ping

2013-10-21

Ionic liquids (ILs) have numerous chemical applications as environmentally green solvents that are extending into microemulsion applications. In this work, a novel benign IL-in-water microemulsion system modified by an IL surfactant has been proposed for simultaneous extraction of hydrophilic and lipophilic constituents from Flos Chrysanthemi (Chrysanthemum morifolium). Constituents were analyzed by rapid-resolution liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. A mixture-design approach was used to optimize the IL surfactant and the IL oil phase in the microemulsion system. Microemulsions consisting of 6.0% 1-dodecyl-3-methylimidazolium hydrogen sulfate, 0.1% 1-vinyl-3-methylimidazolium hexafluorophosphate and 93.9% water offered the acceptable extract efficiency that are comparable to or even better than conventional volatile organic solvents. This assay was fully validated with respect to the linearity of response (r(2) > 0.999 over two orders of magnitude), precision (intra-RSD < 0.49 and inter-day RSD < 2.21), and accuracy (recoveries ranging from 93.73% to 101.84%). The proposed IL-in-water microemulsion method provided an environmentally friendly alternative for efficient extraction of compounds from Flos Chrysanthemi and could be extended to complex environmental and pharmaceutical samples.

Social and Environmental Factors Related to Smoking Cessation among Mothers: Findings from the Geographic Research on Welling (Grow) Study

PubMed Central

Castro, Yessenia; Heck, Katherine; Forster, Jean L.; Widome, Rachel; Cubbin, Catherine

2015-01-01

Objectives The current study examined associations between race/ethnicity and psychosocial/environmental factors with current smoking status, and whether psychosocial/environmental factors accounted for racial differences in smoking status in a population-based sample of mothers in California. Methods Cross-sectional data from 542 women with a history of smoking were used. Analyses adjusted for age, partner status, and educational attainment. Results In models adjusted for sociodemographics, black women had significantly lower odds, and Latina immigrants had significantly higher odds of being a former smoker compared to white women. Persons smoking in the home, having a majority of friends who smoke, having perceptions of their neighborhood as being somewhat or very unsafe, and experiencing food insecurity were associated with decreased odds of being a former smoker. When these variables were entered into a single model, only being a Latina immigrant and having a majority of friends who smoke were significantly associated with smoking status. Conclusions Black women demonstrated a notable disparity compared with white women in smoking status, accounted for by psychosocial/environmental factors. Immigrant Latinas demonstrated notable success in ever quitting smoking. Social networks may be important barriers to smoking cessation among women. PMID:26450549

A life cycle assessment of distributed energy production from organic waste: Two case studies in Europe.

PubMed

Evangelisti, Sara; Clift, Roland; Tagliaferri, Carla; Lettieri, Paola

2017-06-01

By means of the life cycle assessment methodology, the purpose of this study is to assess the environmental impact when biomethane from organic waste produced at residential level is used to supply energy to a group of dwellings in the distributed generation paradigm. Three different Combined Heat and Power systems, such as fuel cells, Stirling engine and micro gas turbine, installed at household level are assessed in two different settings: one in Northern Europe (UK) and one in Southern Europe (Italy). Different operating strategies are investigated for each technology. Moreover, marginal electricity production technologies are analysed to assess their influence on the results. This study has demonstrated that the type of bio-methane fed micro-CHP technology employed has a significantly different environmental impact: fuel cells are the most environmentally friendly solution in every category analysed; Stirling engines, although can supply heat to the largest number of dwellings are the least environmentally friendly technology. However, key factors investigated in the model presented in this paper influence the decision making on the type of technology adopted and the operating strategy to be implemented. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sustainable concretes for transportation infrastructure.

DOT National Transportation Integrated Search

2010-07-01

performance in concrete for structural and transportation applications. Based on the challenges associated with coal ash (including SDA) and the economic costs linked to cement production, this research seeks to develop an environmentally friendly an...

TENORM Resources

EPA Pesticide Factsheets

Studies of existing TENORM sites provide information needed to select appropriate methods for estimating risks from these sites, the best ways to clean up the sites, and the most economical and environmentally friendly ways to dispose of the TENORM.

Green Giants.

ERIC Educational Resources Information Center

Wright, Michaella; Maine, Bruce

2001-01-01

Explains how designing and constructing sustainable, environmentally friendly school buildings does not have to be a costly venture. Provides advice for selecting building materials, developing energy efficiency, and minimizing toxins. Reviews the status of national sustainable design standards. (GR)

United States - Japan evaluation tools and methods.

DOT National Transportation Integrated Search

2014-01-01

Cooperative systems based on intelligent transportation system (ITS) technologies can deliver significant benefits for all road users and the public, especially in terms of safer, more energy-efficient, and environmentally friendly surface transporta...

Ribonucleic acid interference (RNAi) and control of citrus pests

USDA-ARS?s Scientific Manuscript database

Ribonucleic acid interference, RNAi, applications and function are described for the non-scientist to bring a better understanding of how this emerging technology is providing environmentally friendly, non-transgenic, insect pest control. ...

Environmentally-friendly lithium recycling from a spent organic li-ion battery.

PubMed

Renault, Stéven; Brandell, Daniel; Edström, Kristina

2014-10-01

A simple and straightforward method using non-polluting solvents and a single thermal treatment step at moderate temperature was investigated as an environmentally-friendly process to recycle lithium from organic electrode materials for secondary lithium batteries. This method, highly dependent on the choice of electrolyte, gives up to 99% of sustained capacity for the recycled materials used in a second life-cycle battery when compared with the original. The best results were obtained using a dimethyl carbonate/lithium bis(trifluoromethane sulfonyl) imide electrolyte that does not decompose in presence of water. The process implies a thermal decomposition step at a moderate temperature of the extracted organic material into lithium carbonate, which is then used as a lithiation agent for the preparation of fresh electrode material without loss of lithium. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Two-Wheeled, Self-Balancing Electric Vehicle Used As an Environmentally Friendly Individual Means of Transport

NASA Astrophysics Data System (ADS)

Bździuch, D.; Grzegożek, W.

2016-09-01

This paper shows a concept of a model of a two-wheeled self-balancing vehicle with an electric motor drive as an environmentally-friendly personal transporter. The principle of work, modelling of construction and performing a simulation are presented and discussed. The visualization of the designed vehicle was made thanks to using Solid Works a computer-aided design program. The vehicle was modelled as an inverted pendulum. The stability of the mechanism in the equilibrium position was studied. An exemplary steering system was also subjected to the analysis that compared two controllers: PID and LQR which enabled to monitor the balance of the vehicle when the required conditions were fulfilled. Modelling of work of the controllers and the evaluation of the obtained results in required conditions were performed in the MATLAB environment.

Stability of user-friendly blood typing kits stored under typical military field conditions.

PubMed

Bienek, Diane R; Chang, Cheow K; Charlton, David G

2009-10-01

To help preserve in-theater strength within deployed military units, commercially available, rapid, user-friendly ABO-Rh blood typing kits were evaluated to determine their stability in storage conditions commonly encountered by the warfighter. Methods for environmental exposure testing were based on MIL-STD-810F. When Eldon Home Kits 2511 were exposed to various temperature/relative humidity conditions, the results were comparable to those obtained with the control group and those obtained with industry-standard methods. For the ABO-Rh Combination Blood Typing Experiment Kits, 2 of the exposure treatments rendered them unusable. In addition, a third set of exposure treatments adversely affected the kits, resulting in approximately 30% blood type misclassifications. Collectively, this evaluation of commercial blood typing kits revealed that diagnostic performance can vary between products, lots, and environmental storage conditions.

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al2O3 passivation layer

PubMed Central

Chen, Hong-Yan; Lu, Hong-Liang; Sun, Long; Ren, Qing-Hua; Zhang, Hao; Ji, Xin-Ming; Liu, Wen-Jun; Ding, Shi-Jin; Yang, Xiao-Feng; Zhang, David Wei

2016-01-01

Nowadays, the multi-crystalline silicon (mc-Si) solar cells dominate the photovoltaic industry. However, the current acid etching method on mc-Si surface used by firms can hardly suppress the average reflectance value below 25% in the visible light spectrum. Meanwhile, the nitric acid and the hydrofluoric contained in the etching solution is both environmental unfriendly and highly toxic to human. Here, a mc-Si solar cell based on ZnO nanostructures and an Al2O3 spacer layer is demonstrated. The eco-friendly fabrication is realized by low temperature atomic layer deposition of Al2O3 layer as well as ZnO seed layer. Moreover, the ZnO nanostructures are prepared by nontoxic and low cost hydro-thermal growth process. Results show that the best passivation quality of the n+ -type mc-Si surface can be achieved by balancing the Si dangling bond saturation level and the negative charge concentration in the Al2O3 film. Moreover, the average reflectance on cell surface can be suppressed to 8.2% in 400–900 nm range by controlling the thickness of ZnO seed layer. With these two combined refinements, a maximum solar cell efficiency of 15.8% is obtained eventually. This work offer a facile way to realize the environmental friendly fabrication of high performance mc-Si solar cells. PMID:27924911

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al2O3 passivation layer

NASA Astrophysics Data System (ADS)

Chen, Hong-Yan; Lu, Hong-Liang; Sun, Long; Ren, Qing-Hua; Zhang, Hao; Ji, Xin-Ming; Liu, Wen-Jun; Ding, Shi-Jin; Yang, Xiao-Feng; Zhang, David Wei

2016-12-01

Nowadays, the multi-crystalline silicon (mc-Si) solar cells dominate the photovoltaic industry. However, the current acid etching method on mc-Si surface used by firms can hardly suppress the average reflectance value below 25% in the visible light spectrum. Meanwhile, the nitric acid and the hydrofluoric contained in the etching solution is both environmental unfriendly and highly toxic to human. Here, a mc-Si solar cell based on ZnO nanostructures and an Al2O3 spacer layer is demonstrated. The eco-friendly fabrication is realized by low temperature atomic layer deposition of Al2O3 layer as well as ZnO seed layer. Moreover, the ZnO nanostructures are prepared by nontoxic and low cost hydro-thermal growth process. Results show that the best passivation quality of the n+ -type mc-Si surface can be achieved by balancing the Si dangling bond saturation level and the negative charge concentration in the Al2O3 film. Moreover, the average reflectance on cell surface can be suppressed to 8.2% in 400-900 nm range by controlling the thickness of ZnO seed layer. With these two combined refinements, a maximum solar cell efficiency of 15.8% is obtained eventually. This work offer a facile way to realize the environmental friendly fabrication of high performance mc-Si solar cells.

New environmentally-friendly antimicrobials and biocides from Andean and Mexican biodiversity.

PubMed

Cespedes, Carlos L; Alarcon, Julio; Aqueveque, Pedro M; Lobo, Tatiana; Becerra, Julio; Balbontin, Cristian; Avila, Jose G; Kubo, Isao; Seigler, David S

2015-10-01

Persistent application of pesticides often leads to accumulation in the environment and to the development of resistance in various organisms. These chemicals frequently degrade slowly and have the potential to bio-accumulate across the food chain and in top predators. Cancer and neuronal damage at genomic and proteomic levels have been linked to exposure to pesticides in humans. These negative effects encourage search for new sources of biopesticides that are more "environmentally-friendly" to the environment and human health. Many plant or fungal compounds have significant biological activity associated with the presence of secondary metabolites. Plant biotechnology and new molecular methods offer ways to understand regulation and to improve production of secondary metabolites of interest. Naturally occurring crop protection chemicals offer new approaches for pest management by providing new sources of biologically active natural products with biodegradability, low mammalian toxicity and environmentally-friendly qualities. Latin America is one of the world's most biodiverse regions and provide a previously unsuspected reservoir of new and potentially useful molecules. Phytochemicals from a number of families of plants and fungi from the southern Andes and from Mexico have now been evaluated. Andean basidiomycetes are also a great source of scientifically new compounds that are interesting and potentially useful. Use of biopesticides is an important component of integrated pest management (IPM) and can improve the risks and benefits of production of many crops all over the world. Copyright © 2015 Elsevier Inc. All rights reserved.

Developmental Etiologies of Alcohol Use and Their Relations to Parent and Peer Influences Over Adolescence and Young Adulthood: A Genetically Informed Approach.

PubMed

Deutsch, Arielle R; Wood, Phillip K; Slutske, Wendy S

2017-12-01

Distinct changes in alcohol use etiologies occur during adolescence and young adulthood. Additionally, measured environments known to influence alcohol use such as peers and parenting practice can interact or be associated with this genetic influence. However, change in genetic and environmental influences over age, as well as how associations with measured environments change over age, is understudied. The National Longitudinal Study of Adolescent Health (Add Health) sibling subsample was used to examine data-driven biometric models of alcohol use over ages 13 to 27. Associations between friends' drinking, parental autonomy granting, and maternal closeness were also examined. The best-fitting model included a 5-factor model consisting of early (ages 13 to 20) and overall (ages 13 to 27) additive genetic and unique environmental factors, as well as 1 overall common environment factor. The overall additive genetic factor and the early unique environment factor explained the preponderance of mean differences in the alcohol use over this portion of the life span. The most important factors explaining variance attributed to alcohol use changed over age. Additionally, friend use had the strongest associations with genetic and environmental factors at all ages, while parenting practices had almost no associations at any age. These results supplement previous studies indicating changes in genetic and environmental influences in alcohol use over adolescence and adulthood. However, prior research suggesting that constraining exogenous predictors of genetic and environmental factors to have effects of the same magnitude across age overlooks the differential role of factors associated with alcohol use during adolescence. Consonant with previous research, friend use appears to have a more pervasive influence on alcohol use than parental influence during this age. Interventions and prevention programs geared toward reducing alcohol use in younger populations may benefit from focus on peer influence. Copyright © 2017 by the Research Society on Alcoholism.

Green Dentistry, A Metamorphosis Towards an Eco-Friendly Dentistry: A Short Communication

PubMed Central

Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

2014-01-01

Dentistry is most importantly and foremost a healing profession. In today’s world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards ‘Green dentistry’. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution. PMID:25177666

Eubiotic effect of a dietary acidifier (potassium diformate) on the health status of cultured Oreochromis niloticus

PubMed Central

Abu Elala, Nermeen M.; Ragaa, Naela M.

2014-01-01

In connection with the global demand for safe human food and the production of environmentally friendly aquaculture products, acidifiers are natural organic acids and salts that have received considerable attention as animal-feed additives. The current study was designed to evaluate the effects of potassium diformate (KDF) on the growth performance and immunity of cultured Oreochromis niloticus (O. niloticus). Four iso-nitrogenous and iso-caloric rations containing graded levels of KDF, including 0% (control basal diet), 0.1%, 0.2% and 0.3%, were fed separately to four equal fish groups (30 fish/group with an initial body weight of 53.49 ± 6.15 g) for sixty days. At the end of the experimental period, the fish groups fed on 0.2% and 0.3% KDF exhibited significant improvements in their feed intake, live weight gain, specific growth rate, feed conversion ratio and protein efficiency ratio, with concomitant improvement of their apparent protein digestibility (p < 0.05). Dietary supplementation of 0.3% KDF appeared to stimulate the beneficial intestinal flora; a proliferation was observed of indigenous probionts (Eubiosis) associated with the relative activation of cellular and humeral innate immunity (phagocytic activity/index, nitroblue tetrazolium reduction test and serum/gut mucous lysozyme activity). The cumulative mortality of the fish groups fed on KDF and challenged orally with Aeromonas hydrophila was lower than that of the control group. The resistance against diseases increased with dietary KDF in a dose-dependent manner. Thus, we conclude that the use of acidifiers can be an efficient tool to achieve sustainable, economical and safe fish production. PMID:26199753

Toxicity of β-citronellol, geraniol and linalool from Pelargonium roseum essential oil against the West Nile and filariasis vector Culex pipiens (Diptera: Culicidae).

PubMed

Tabari, Mohaddeseh Abouhosseini; Youssefi, Mohammad Reza; Esfandiari, Aryan; Benelli, Giovanni

2017-10-01

Insect vectors are responsible for spreading devastating parasites and pathogens. A large number of botanicals have been suggested for eco-friendly control programs against mosquito vectors, and some of them are aromatic plants. Pelargonium roseum, a species belonging to the Geraniaceae family, due to its pleasant rose-like odor may represent a suitable candidate as mosquito repellent and/or larvicide. In this research, we evaluated the toxicity of the essential oil from P. roseum and its major constituents against the West Nile and filariasis vector Culex pipiens. The chemical composition of P. roseum essential oil was analyzed by gas chromatography-mass spectroscopy. Major constituents were citronellol (35.9%), geraniol (18.5%), and linalool (5.72%). The bioactivity of P. roseum essential oil and its three major compounds on larvae and egg rafts of Cx. pipiens was evaluated. The essential oil had a significant toxic effect on larvae and egg rafts of Cx. pipiens, with 50% lethal concentration (LC 50 ) values of 5.49 and 0.45μg/mL, respectively. Major constituents, geraniol, citronellol and linalool resulted in LC 50 values of 6.86, 7.64 and 14.87μg/mL on larvae, and 0.8, 0.67 and 1.27μg/mL on egg rafts. Essential oil and two of its constituents, citronellol and geraniol showed moderate knock-down on Cx. pipiens adults. Overall, the present investigation revealed that the major components of P. roseum and specially the whole essential oil could be helpful in developing novel and safe mosquito control tools and also offer an environmentally safe and cheap tool for reducing Cx. pipiens mosquito populations. Copyright © 2017. Published by Elsevier Ltd.

Environmental justice in Scotland: policy, pedagogy and praxis

NASA Astrophysics Data System (ADS)

Scandrett, Eurig

2007-10-01

In the first decade of Scottish devolution, environmental justice became a significant component of environmental policy for the Scottish Executive, especially under First Minister Jack McConnell. This paper analyses how a discourse developed within policy narratives which separated environmental justice from economic growth and the interests of capital. In particular, it explores the role which research has played in justifying this discourse. By contrast, an alternative discourse has developed through reflexive and dialogical research associated with the praxis of the environmental organization Friends of the Earth Scotland. This alternative discourse is embedded in the embryonic environmental justice movement in Scotland, and identifies environmental justice as a social conflict which exposes negative externalities at the heart of economic development.

LCA of greywater management within a water circular economy restorative thinking framework.

PubMed

Dominguez, Sara; Laso, Jara; Margallo, María; Aldaco, Rubén; Rivero, Maria J; Irabien, Ángel; Ortiz, Inmaculada

2018-04-15

Greywater reuse is an attractive option for the sustainable management of water under water scarcity circumstances, within a water circular economy restorative thinking framework. Its successful deployment relies on the availability of low cost and environmentally friendly technologies. The life cycle assessment (LCA) approach provides the appropriate methodological tool for the evaluation of alternative treatments based on environmental decision criteria and, therefore, it is highly useful during the process conceptual design. This methodology should be employed in the early design phase to select those technologies with lower environmental impact. This work reports the comparative LCA of three scenarios for greywater reuse: photocatalysis, photovoltaic solar-driven photocatalysis and membrane biological reactor, in order to help the selection of the most environmentally friendly technology. The study has been focused on the removal of the surfactant sodium dodecylbenzenesulfonate, which is used in the formulation of detergents and personal care products and, thus, widely present in greywater. LCA was applied using the Environmental Sustainability Assessment methodology to obtain two main environmental indicators in order to simplify the decision making process: natural resources and environmental burdens. Energy consumption is the main contributor to both indicators owing to the high energy consumption of the light source for the photocatalytic greywater treatment. In order to reduce its environmental burdens, the most desirable scenario would be the use of solar light for the photocatalytic transformation. However, while the technological challenge of direct use of solar light is approached, the environmental suitability of the photovoltaic solar energy driven photocatalysis technology to greywater reuse has been demonstrated, as it involves the smallest environmental impact among the three studied alternatives. Copyright © 2017 Elsevier B.V. All rights reserved.

40 CFR 23.7 - Timing of Administrator's action under Safe Drinking Water Act.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Timing of Administrator's action under Safe Drinking Water Act. 23.7 Section 23.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL JUDICIAL REVIEW UNDER EPA-ADMINISTERED STATUTES § 23.7 Timing of Administrator's action under Safe Drinking Water Act. Unless the...

Globalization and the new integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lay, K.L.

1996-12-31

This paper describes topics of importance to energy companies of the future. Topics include: privatization and liberalization in developing countries; deregulation and increased competition; a shift to more environmentally friendly technologies and fuels; and rapid rate of change.

Evaluation of Virginia's first heated bridge.

DOT National Transportation Integrated Search

2000-12-01

This study is a contribution to the Heated Bridge Technology Program established in 1991 under the Intermodal Surface Transportation Efficiency Act. The goal of the program was to find durable and environmentally friendly heated bridge technologies f...

ENVIRONMENTALLY FRIENDLY LEATHER TANNING USING ENZYMES

EPA Science Inventory

The effectiveness of the leather tanning will be evaluated by measuring shrinkage temperature, and analyzing leather structure using Scan Electron Microscope (SEM). The team will also measure leather physical/mechanical properties, including softness, tensile strength, elon...

Nematodes (Rhabditida: Steinernematidae and Heterorhabditidae)

USDA-ARS?s Scientific Manuscript database

Nematodes are roundworms in the phylum Nematoda. Although most are free-living, some nematodes are parasites of plants, humans, or livestock. Entomopathogenic nematodes in the families Steinernematidae & Heterorhabditidae only parasitize insects. These nematodes are used as environmentally friend...

Making Big Data, Safe Data: A Test Optimization Approach

DTIC Science & Technology

2016-06-15

catalyzed by the need to put a value on testing. Included with this project report is a proof of concept created in MS Excel utilizing its VBA ...Language To make the proof of concept more user friendly, MS Excel was chosen for its convenient user interface and its developer tool, VBA . Another...reason it was selected is everyone has easy access to MS Excel, so the file accompanying this project paper can be easily viewed, used, and modified by

40 CFR Appendix A to Part 45 - Environmental Protection Agency Training Programs

Code of Federal Regulations, 2011 CFR

2011-07-01

... Office of Water: Water Pollution Control—Professional Training Grants X X Safe Drinking Water Professional Training Grants X Safe Drinking Water—Occupational Training X Office of Solid Waste and Emergency...

Demonstration of an Environmentally Benign and Reduced Corrosion Runway Deicing Fluid

DTIC Science & Technology

2011-01-01

ADDRESS(ES) Enviromental Security Technology Certification Program: 901 North Stuart Street, Suite 303, Arlington, Virginia 22203 10. SPONSOR...IMPLEMENTATION ISSUES Users may express concern because the Battelle-RDF is new and they may have reservations because of its potential damage to...several drivers for implementing a new , more environmentally friendly RDF. 1.3.1 Water Pollution Reduction The Clean Water Act (CWA) and its

Demonstration of an Environmentally Benign and Reduced Corrosion Runway Deicing Fluid

DTIC Science & Technology

2011-01-01

43201 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Enviromental Security Technology...laboratory to the airfields and airports across the country. Users may express concern because the Battelle-RDFs are new and they may have...airfield anti-icing and deicing at WPAFB. 1.3 REGULATORY DRIVERS There are several drivers for implementing a new , more environmentally friendly

The Environment and Christian Ethics

NASA Astrophysics Data System (ADS)

Northcott, Michael S.

1996-09-01

This book is about the extent, origins and causes of the environmental crisis. Dr. Northcott argues that Christianity has lost the biblical awareness of the interconnectedness of all life. He shows how Christian theologians and believers might recover a more ecologically-friendly belief system and life style. The author provides an important corrective to secular approaches to environmental ethics, including utilitarian individualism, animal rights theories and deep ecology.

Overview of paint removal methods

NASA Astrophysics Data System (ADS)

Foster, Terry

1995-04-01

With the introduction of strict environmental regulations governing the use and disposal of methylene chloride and phenols, major components of chemical paint strippers, there have been many new environmentally safe and effective methods of paint removal developed. The new methods developed for removing coatings from aircraft and aircraft components include: mechanical methods using abrasive media such as plastic, wheat starch, walnut shells, ice and dry ice, environmentally safe chemical strippers and paint softeners, and optical methods such as lasers and flash lamps. Each method has its advantages and disadvantages, and some have unique applications. For example, mechanical and abrasive methods can damage sensitive surfaces such as composite materials and strict control of blast parameters and conditions are required. Optical methods can be slow, leaving paint residues, and chemical methods may not remove all of the coating or require special coating formulations to be effective. As an introduction to environmentally safe and effective methods of paint removal, this paper is an overview of the various methods available. The purpose of this overview is to introduce the various paint removal methods available.

Students' Environmental Responsibility and Their Willingness to Pay for Green Buildings

ERIC Educational Resources Information Center

Attaran, Sharmin; Celik, Bilge Gokhan

2015-01-01

Purpose: The purpose of this study is to explore environmental attitudes and how such attitudes, when combined with a specific cost, can affect environmental behavior. Environmental attitudes are important to study due to the rising belief by building occupants that they are owed safe, healthy, environmentally responsible, and comfortable living…

Formulation of lubricating grease using Beeswax thickener

NASA Astrophysics Data System (ADS)

Suhaila, N.; Japar, A.; Aizudin, M.; Aziz, A.; Najib Razali, Mohd

2018-04-01

The issues on environmental pollution has brought the industries to seek the alternative green solutions for lubricating grease formulation. The significant challenges in producing modified grease are in which considering the chosen thickener as one of the environmental friendly material. The main purposes of the current research were to formulate lubricant grease using different types of base oils and to study the effect of thickener on the formulated lubricant grease. Used oil and motor oil were used as the base oils for the grease preparation. Beeswax and Damar were used as thickener and additive. The grease is tested based on its consistency, stability and oil bleeding. The prepared greases achieved grease consistency of grade 2 and 3 except for grease with unfiltered used oil. Grease formulated with used oil and synthetic oil tend to harden and loss its lubricating ability under high temperature compared to motor oil’ grease. Grease modification using environmental friendly thickener were successfully formulated but it is considered as a low temperature grease as the beeswax have low melting point of 62°C-65°C.

Association and Diffusion of Li(+) in Carboxymethylcellulose Solutions for Environmentally Friendly Li-ion Batteries.

PubMed

Casalegno, Mosè; Castiglione, Franca; Passarello, Marco; Mele, Andrea; Passerini, Stefano; Raos, Guido

2016-07-21

Carboxymethylcellulose (CMC) has been proposed as a polymeric binder for electrodes in environmentally friendly Li-ion batteries. Its physical properties and interaction with Li(+) ions in water are interesting not only from the point of view of electrode preparation-processability in water is one of the main reasons for its environmental friendliness-but also for its possible application in aqueous Li-ion batteries. We combine molecular dynamics simulations and variable-time pulsed field gradient spin-echo (PFGSE) NMR spectroscopy to investigate Li(+) transport in CMC-based solutions. Both the simulations and experimental results show that, at concentrations at which Li-CMC has a gel-like consistency, the Li(+) diffusion coefficient is still very close to that in water. These Li(+) ions interact preferentially with the carboxylate groups of CMC, giving rise to a rich variety of coordination patterns. However, the diffusion of Li(+) in these systems is essentially unrestricted, with a fast, nanosecond-scale exchange of the ions between CMC and the aqueous environment. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bioconcrete: next generation of self-healing concrete.

PubMed

Seifan, Mostafa; Samani, Ali Khajeh; Berenjian, Aydin

2016-03-01

Concrete is one of the most widely used construction materials and has a high tendency to form cracks. These cracks lead to significant reduction in concrete service life and high replacement costs. Although it is not possible to prevent crack formation, various types of techniques are in place to heal the cracks. It has been shown that some of the current concrete treatment methods such as the application of chemicals and polymers are a source of health and environmental risks, and more importantly, they are effective only in the short term. Thus, treatment methods that are environmentally friendly and long-lasting are in high demand. A microbial self-healing approach is distinguished by its potential for long-lasting, rapid and active crack repair, while also being environmentally friendly. Furthermore, the microbial self-healing approach prevails the other treatment techniques due to the efficient bonding capacity and compatibility with concrete compositions. This study provides an overview of the microbial approaches to produce calcium carbonate (CaCO3). Prospective challenges in microbial crack treatment are discussed, and recommendations are also given for areas of future research.

Fabrication of Cellulose Film with Enhanced Mechanical Properties in Ionic Liquid 1-Allyl-3-methylimidaxolium Chloride (AmimCl)

PubMed Central

Pang, Jinhui; Liu, Xin; Zhang, Xueming; Wu, Yuying; Sun, Runcang

2013-01-01

More and more attention has been paid to environmentally friendly bio-based renewable materials as the substitution of fossil-based materials, due to the increasing environmental concerns. In this study, regenerated cellulose films with enhanced mechanical property were prepared via incorporating different plasticizers using ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl) as the solvent. The characteristics of the cellulose films were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal analysis (TG), X-ray diffraction (XRD), 13C Solid-state cross-polarization/magic angle spinning nuclear magnetic resonance (CP/MAS NMR) and tensile testing. The results showed that the cellulose films exhibited a homogeneous and smooth surface structure. It was noted that the thermal stability of the regenerated cellulose film plasticized with glycerol was increased compared with other regenerated cellulose films. Furthermore, the incorporation of plasticizers dramatically strengthened the tensile strength and improved the hydrophobicity of cellulose films, as compared to the control sample. Therefore, these notable results exhibited the potential utilization in producing environmentally friendly cellulose films with high performance properties. PMID:28809209

Is agritourism eco-friendly? A comparison between agritourisms and other farms in Italy using farm accountancy data network dataset.

PubMed

Mastronardi, Luigi; Giaccio, Vincenzo; Giannelli, Agostino; Scardera, Alfonso

2015-01-01

This paper presents the results of research regarding the environmental performances of Italian farms with agritourism compared with farms without agritourism. In Italy, agritourism is considered an agricultural activity and can only be performed by a farmer. Moreover, Italian national legislation forces the farmer to dedicate himself mainly to traditional farming, rather than to tourism activities. For this reason, environmental performances have been highlighted by analyzing only features and production systems of the farms. By utilizing the most frequent indicators used in studies regarding sustainability, the authors show how Italian agritourisms tend to develop more environmentally friendly agricultural methods, which have a positive impact on biodiversity, landscape and natural resources. The empirical analysis is based on the Italian FADN (Farm Accountancy Data Network) dataset. The European FADN was created to represent farms' technical and economic operation in the European Union and on which it drafts the agricultural and rural policies. The dichotomous structure of the dependent variable (presence or absence of agritourism at the farm) has a propensity for an assessment method based on Binary Response Model Regression.

Bacteriophages and Bacterial Plant Diseases

PubMed Central

Buttimer, Colin; McAuliffe, Olivia; Ross, R. P.; Hill, Colin; O’Mahony, Jim; Coffey, Aidan

2017-01-01

Losses in crop yields due to disease need to be reduced in order to meet increasing global food demands associated with growth in the human population. There is a well-recognized need to develop new environmentally friendly control strategies to combat bacterial crop disease. Current control measures involving the use of traditional chemicals or antibiotics are losing their efficacy due to the natural development of bacterial resistance to these agents. In addition, there is an increasing awareness that their use is environmentally unfriendly. Bacteriophages, the viruses of bacteria, have received increased research interest in recent years as a realistic environmentally friendly means of controlling bacterial diseases. Their use presents a viable control measure for a number of destructive bacterial crop diseases, with some phage-based products already becoming available on the market. Phage biocontrol possesses advantages over chemical controls in that tailor-made phage cocktails can be adapted to target specific disease-causing bacteria. Unlike chemical control measures, phage mixtures can be easily adapted for bacterial resistance which may develop over time. In this review, we will examine the progress and challenges for phage-based disease biocontrol in food crops. PMID:28163700

Environmentally friendly procedure based on VA-MSPD for the determination of booster biocides in fish tissue.

PubMed

Vieira, Augusto A; Caldas, Sergiane S; Escarrone, Ana Laura Venquiaruti; Arias, Jean Lucas de Oliveira; Primel, Ednei Gilberto

2018-03-01

Booster biocides have been widely applied to ships and other submerged structures. These compounds can be released into the marine environment as the result of vessel hull leaching and may remain in different environmental compartments. This study aimed at introducing an environmentally friendly procedure for the extraction of irgarol and diuron from fish samples by vortex-assisted matrix solid phase dispersion (VA-MSPD) with detection by liquid chromatography tandem mass spectrometry. Different types of solid supports and solvents were evaluated. The best results were found when 0.5g mussel shell, 0.5g sodium sulfate and 5mL ethanol were used. Analytical recoveries ranged from 81 to 110%, with RSD below 10%, whereas the matrix effect was between -17 and 1% (for all samples under study). LOQ values of irgarol and diuron were 5 and 50ngg -1 , respectively. The method under investigation proved to be a promising alternative to controlling contamination of fish by booster biocides, with low consumption of biodegradable reagents. Copyright © 2017 Elsevier Ltd. All rights reserved.

A towel less: social norms enhance pro-environmental behavior in hotels.

PubMed

Reese, Gerhard; Loew, Kristina; Steffgen, Georges

2014-01-01

Previous research has shown that normative appeals to engage in environmentally friendly behavior were most effective when they were accompanied by a provincial norm (e.g., when norms matched individuals' immediate situational circumstances). Analyzing hotel guests' towel-use during their stay, the current study tests whether messages employing provincial norms were more effective in reducing towel-use than standard environmental messages. In line with previous findings, guests of two hotels used significantly fewer towels when provincial normative appeals--rather than standard environmental messages--were communicated. These findings corroborate to the body of research demonstrating the power of social norms on environmental behavior.

76 FR 23613 - Draft Programmatic Environmental Assessment for Hazard Mitigation Safe Room Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... Emergency Management Agency (FEMA) may provide funding to eligible applicants for eligible, feasible, and... from hazards and their effects. One such activity is the construction and installation of safe rooms to...

Development of an eco-friendly, cost-effective biogrout for concrete crack repair : tech transfer summary.

DOT National Transportation Integrated Search

2016-09-01

Due to the environmental and economic benefits, biocementation resulting from a microbiologically induced calcium carbonate precipitation process is being increasingly used to enhance civil infrastructurethrough stone surface protection, sand ceme...

Seismic Behavior and Design of Segmental Precast Post-Tensioned Concrete Piers

DOT National Transportation Integrated Search

2011-06-01

Segmental precast column construction is an economic environmental friendly solution to accelerate bridge construction in the United : States. Also, concrete-filled fiber reinforced polymer tubes (CFFT) represents a potential economic solution for du...

Organic and Other Environmentally Friendly Foods

MedlinePlus

... Are they safer? Are they worth the extra money if they cost more than conventional foods? How do they taste? And what about those labels touting foods as "sustainable," "natural," "free-range," "grass-fed," or "fair trade"? What do ...

Ribonucleic acid interference (RNAi) Technology for control of Asian citrus psyllid - You Tube

USDA-ARS?s Scientific Manuscript database

RNAi, Ribonucleic acid interference, function and application are described to bring a better understanding of how this emerging technology is providing environmentally friendly, non-transgenic, insect pest control to the citrus industry....

Sediment management alternatives for the Port of Bienville.

DOT National Transportation Integrated Search

2010-02-01

The objective of this report is to present economical, environmentally friendly, and effective alternatives to maintenance : dredging for the Port of Bienville and its access channels. The Port of Bienville is located in Hancock County, directly off ...

Berkeley bicycle plan : draft for inclusion in the general plan

DOT National Transportation Integrated Search

1998-12-31

The City of Berkeley has long supported bicycling as an environmentally friendly, healthy, lowcost method of transportation and recreation. Frequently, roadway facility and funding decisions are made with little consideration for bicycling as a serio...

Electric Trams : Lessons Learned at Cape Cod National Seashore

DOT National Transportation Integrated Search

2005-08-31

In seeking to obtain environmentally friendly replacement vehicles for its parking shuttle service, Cape Cod National Seashore set out to procure two hybrid-electric trams in 1998. Ultimately, battery-powered trams were delivered with multiple safety...

Wood: a construction material for tall buildings

NASA Astrophysics Data System (ADS)

Wimmers, Guido

2017-12-01

Wood has great potential as a building material, because it is strong and lightweight, environmentally friendly and can be used in prefabricated buildings. However, only changes in building codes will make wood competitive with steel and concrete.

USDA Flax fiber utilization research

USDA-ARS?s Scientific Manuscript database

The United States is pursuing natural fibers as sustainable, environmentally friendly sources for a variety of industrial applications. Flax (Linum usitatissimum L.) fiber offers many possibilities towards this goal. Research on flax fiber production, processing, and standards development is urgen...

Recyclable organic solar cells on cellulose nanocrystal substrates

PubMed Central

Zhou, Yinhua; Fuentes-Hernandez, Canek; Khan, Talha M.; Liu, Jen-Chieh; Hsu, James; Shim, Jae Won; Dindar, Amir; Youngblood, Jeffrey P.; Moon, Robert J.; Kippelen, Bernard

2013-01-01

Solar energy is potentially the largest source of renewable energy at our disposal, but significant advances are required to make photovoltaic technologies economically viable and, from a life-cycle perspective, environmentally friendly, and consequently scalable. Cellulose nanomaterials are emerging high-value nanoparticles extracted from plants that are abundant, renewable, and sustainable. Here, we report on the first demonstration of efficient polymer solar cells fabricated on optically transparent cellulose nanocrystal (CNC) substrates. The solar cells fabricated on the CNC substrates display good rectification in the dark and reach a power conversion efficiency of 2.7%. In addition, we demonstrate that these solar cells can be easily separated and recycled into their major components using low-energy processes at room temperature, opening the door for a truly recyclable solar cell technology. Efficient and easily recyclable organic solar cells on CNC substrates are expected to be an attractive technology for sustainable, scalable, and environmentally-friendly energy production. PMID:23524333

The effect of environmentally friendly hot-dipping auxiliary on the morphology of alloy coatings

NASA Astrophysics Data System (ADS)

Chen, Suhong; Guo, Kai; Zhu, Yi; Gao, Feng; Han, Zhijun

2017-10-01

Zn-Al-Mg-RE hot-dip alloy coatings which prepared by the environmentally friendly plating auxiliary were investigated by X-ray diffraction (XRD), SEM analysis and salt spray measurement. Significant variation in coating surface morphology and element content are observed with increasing content of Al and Mg in this paper. A reinforced ternary eutectic Zn-Al-MgZn2 is confirmed which attribute to improvement metallographic structure derived from certain ternary eutectic reaction in alloy solidification. For Mg-containing coatings, the enhanced corrosion resistance is observed by corrosion resistance test in salt spray at 35°C with 5% NaCl in terms of corrosion weight changes. It is found that the incorporation of 3 wt.% Mg and 0.1 wt.% rare earth element in to Zn-Al-Mg-RE bath caused structural refinement of the crystal and also helped to achieve excellent surface morphology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Xin-Yu; Zhu, Ying-Jie, E-mail: y.j.zhu@mail.sic.ac.cn; Lu, Bing-Qiang

Graphical abstract: Hydroxyapatite nanorods are synthesized using biocompatible biomolecule pyridoxal-5′-phosphate as a new organic phosphorus source by the hydrothermal method. - Highlights: • Hydrothermal synthesis of hydroxyapatite nanorods is reported. • Biocompatible pyridoxal-5′-phosphate is used as an organic phosphorus source. • This method is simple, surfactant-free and environmentally friendly. - Abstract: Hydroxyapatite nanorods are synthesized by the hydrothermal method using biocompatible biomolecule pyridoxal-5′-phosphate (PLP) as a new organic phosphorus source. In this method, PLP biomolecules are hydrolyzed to produce phosphate ions under hydrothermal conditions, and these phosphate ions react with pre-existing calcium ions to form hydroxyapatite nanorods. The effects ofmore » experimental conditions including hydrothermal temperature and time on the morphology and crystal phase of the products are investigated. This method is simple, surfactant-free and environmentally friendly. The products are characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric (TG) analysis.« less

Initial research on recycled tyre bales for road infrastructure applications

NASA Astrophysics Data System (ADS)

Duda, Aleksander; Sobala, Dariusz

2017-12-01

The paper reviews selected surveys carried out within the R&D project, co-financed with the European Regional Development Fund, called "ReUse - Innovative Recycling Materials, Enhancing the Sustainability of Bridge Facilities" (Innotech No. K3 / IN3 / 38/228116 / NCBiR / 15). The aim of the project and conducted research is to develop and implement innovative, cheap and environmentally-friendly recycled construction material in the form of tyre bales made from compressed used car tyres. This material is likely to be applied in civil engineering, especially in transport infrastructure, geotechnical and hydraulic engineering. New material is cheap and has unique properties such as low weight, high water permeability, high vibration and noise-damping capacity, low pressure coefficient values and other parameters that technically and economically allow it to replace natural aggregates. The extensive practical application of new material will facilitate the replacement of waste management methods with the environmentally friendly ones.

Recyclable organic solar cells on cellulose nanocrystal substrates.

PubMed

Zhou, Yinhua; Fuentes-Hernandez, Canek; Khan, Talha M; Liu, Jen-Chieh; Hsu, James; Shim, Jae Won; Dindar, Amir; Youngblood, Jeffrey P; Moon, Robert J; Kippelen, Bernard

2013-01-01

Solar energy is potentially the largest source of renewable energy at our disposal, but significant advances are required to make photovoltaic technologies economically viable and, from a life-cycle perspective, environmentally friendly, and consequently scalable. Cellulose nanomaterials are emerging high-value nanoparticles extracted from plants that are abundant, renewable, and sustainable. Here, we report on the first demonstration of efficient polymer solar cells fabricated on optically transparent cellulose nanocrystal (CNC) substrates. The solar cells fabricated on the CNC substrates display good rectification in the dark and reach a power conversion efficiency of 2.7%. In addition, we demonstrate that these solar cells can be easily separated and recycled into their major components using low-energy processes at room temperature, opening the door for a truly recyclable solar cell technology. Efficient and easily recyclable organic solar cells on CNC substrates are expected to be an attractive technology for sustainable, scalable, and environmentally-friendly energy production.

Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

PubMed

Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

2012-01-01

Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

Wider Action Plan and Multidisciplinar Approach Could Be a Wining Idea in Creation of Friendly Environment

PubMed Central

Gojkovic-Bukvic, Natasa; Bukvic, Nenad

2012-01-01

Herein, we proposed planning of wide transdisciplinary actions, which bring a solution for economic activity such as transportation, strongly related to pollution output with possible repercussions on climate change and public health. To solve logistics problem by introduction of common intermodal policy, and creation of more friendly transport solution, it is possible to obtain sustainable development, climate change prevention, government policy, and regulation which are all related to human health and creation of health-supportive environment. This approach permits environmental and biological monitoring same as economic results measurement by key performance indicators. This approach implementing emerging scientific knowledge in environmental health science such as genetic epidemiology aimed at understanding how genomic variation impacts phenotypic expression and how genes interact with the environment at the population level with subsequent translation into practical information for clinicians as well as for public health policy creation. PMID:22496704

Wider action plan and multidisciplinar approach could be a wining idea in creation of friendly environment.

PubMed

Gojkovic-Bukvic, Natasa; Bukvic, Nenad

2012-01-01

Herein, we proposed planning of wide transdisciplinary actions, which bring a solution for economic activity such as transportation, strongly related to pollution output with possible repercussions on climate change and public health. To solve logistics problem by introduction of common intermodal policy, and creation of more friendly transport solution, it is possible to obtain sustainable development, climate change prevention, government policy, and regulation which are all related to human health and creation of health-supportive environment. This approach permits environmental and biological monitoring same as economic results measurement by key performance indicators. This approach implementing emerging scientific knowledge in environmental health science such as genetic epidemiology aimed at understanding how genomic variation impacts phenotypic expression and how genes interact with the environment at the population level with subsequent translation into practical information for clinicians as well as for public health policy creation.

Incorporation of the zosteric sodium salt in silica nanocapsules: synthesis and characterization of new fillers for antifouling coatings

NASA Astrophysics Data System (ADS)

Ruggiero, Ludovica; Crociani, Laura; Zendri, Elisabetta; El Habra, Naida; Guerriero, Paolo

2018-05-01

In the last decade many commercial biocides were gradually banned for toxicity. This work reports, for the first time, the synthesis and characterization of silica nanocontainers loaded with a natural product antifoulant (NPA), the zosteric sodium salt which is a non-commercial and environmentally friendly product with natural origin. The synthesis approach is a single step dynamic self-assembly with tetraethoxysilane (TEOS) as silica precursor. Unlike conventional mesoporous silica nanoparticles, the structure of these silica nanocontainers provides loading capacity and allows prolonged release of biocide species. The obtained nanocapsules have been characterized morphologically by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The encapsulation was checked by FTIR ATR spectroscopy and thermogravimetric analyses. The results of the release studies show the great potential of the here presented newly developed nanofillers in all applications where a controlled release of non-toxic and environmentally friendly biocides is required.

[Health Council of the Netherlands follows the ecological trail: a new venture].

PubMed

Reijnders, Lucas

2011-01-01

The Health Council of the Netherlands' report 'Guidelines for a healthy diet: the ecological perspective' only partially succeeds in its objectives. The main conclusions are correct: less calories for the obese and replacement of animal protein by plant-based foods are good for both health and the environment, and consumption of fish twice a week is good for health, but not for the environment. However, the Health Council's report does not discuss regulatory measures such as internalization of external costs and the introduction of good manufacturing practices, which can be conducive to implementing a more environmentally friendly healthy diet. Also more could have been done with existing scientific literature, which provides support for eating fresh seasonal produce and lowering the average Dutch protein intake by about one third as contributions to an environmentally friendly healthy diet, and for further research in the field of algae-based fish substitutes.

Co-generation of microbial lipid and bio-butanol from corn cob bagasse in an environmentally friendly biorefinery process.

PubMed

Cai, Di; Dong, Zhongshi; Wang, Yong; Chen, Changjing; Li, Ping; Qin, Peiyong; Wang, Zheng; Tan, Tianwei

2016-09-01

Biorefinery process of corn cob bagasse was investigated by integrating microbial lipid and ABE fermentation. The effects of NaOH concentration on the fermentations performance were evaluated. The black liquor after pretreatment was used as substrate for microbial lipid fermentation, while the enzymatic hydrolysates of the bagasse were used for ABE fermentation. The results demonstrated that under the optimized condition, the cellulose and hemicellulose in raw material could be effectively utilized. Approximate 87.7% of the polysaccharides were converted into valuable biobased products (∼175.7g/kg of ABE along with ∼36.6g/kg of lipid). At the same time, almost half of the initial COD (∼48.9%) in the black liquor could be degraded. The environmentally friendly biorefinery process showed promising in maximizing the utilization of biomass for future biofuels production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Criteria for classification of competitive housing projects in terms of their environmental friendliness

NASA Astrophysics Data System (ADS)

Nezhnikova, Ekaterina

2017-10-01

This article deals with social and economic essence of strategy of the housing industry development, both complex system of economic relations in field of production and consumption, which is regulated through the mechanism of prices and implemented through formation and realization of priority directions. Developed criteria for classification of housing construction projects as environmentally friendly and the quality criteria of variables for assessment of the environmental friendliness of residential buildings allowed to determine the ways of development of the industry on the basis of creation of competitive projects in interrelation with quality, environmental friendliness and price of consumption.

Teaching adolescents safe driving and passenger behaviors: effectiveness of the You Hold the Key Teen Driving Countermeasure.

PubMed

King, Keith A; Vidourek, Rebecca A; Love, Jaime; Wegley, Stacey; Alles-White, Monica

2008-01-01

Unsafe driving and passenger behaviors place teens at increased risk for fatal and nonfatal crashes. This study evaluated the short-and long-term efficacy of the You Hold the Key (YHTK) Teen Driving Countermeasure. A two-page survey was completed by high school students at pretest, posttest, and long-term (6-month) posttest. YHTK was associated with significant immediate and long-term improvements in teen seatbelt use, safe driving, and perceived confidence in preventing drunk driving. Compared to pretests, students at immediate and long-term posttest more frequently wore seatbelts when driving or riding, required passengers to wear seatbelts, and limited the number of passengers to the number of seatbelts in the vehicle. Students were more likely at both posttests to avoid drinking and driving and to say no to riding with a friend who had been drinking. YHTK was associated with increases in safe teen driving and passenger behaviors. Success of YHTK is most notably due to its comprehensive nature. Future programs should consider comprehensive strategies when attempting to modify teen behaviors.

[Predictors of Health-related Quality of Life in Bavarian Preschool Children].

PubMed

Weigl, Korbinian; Herr, Caroline Eva Wella; Meyer, Nicole; Otto, Christiane; Stilianakis, Nikolaos; Bolte, Gabriele; Nennstiel-Ratzel, Uta; Kolb, Stefanie

2018-02-01

Little data are available on health-related quality of life (HRQOL) of children in Germany at the age of school enrollment. Aim of this study was to investigate the HRQOL of children during school enrollment and to determine its predictors with special focus on environmental factors. Data from the fifth survey of the Health-Monitoring-Units (GME) conducted in Bavaria (2010/2011) were analyzed. Parent-reported data on HRQOL using the KINDL-R(evised), the Strength and Difficulties Questionnaire (SDQ), socio-demographic characteristics and characteristics of the living environment were assessed. The sample included a total of 3,744 children (45.9% female; mean age: 6.0; SD=0.4). Girls had significantly higher values than boys in total HRQOL (83.7 vs. 82.4, p ≤0.0001) and in all KINDL-R subscales except "psychological well-being" and "physical well-being". For the latter, boys had significantly higher values than girls (84.1 vs. 82.9, p=0.0103). Multiple linear regression analysis showed that parental annoyance with air or noise pollution, possibility for children to safely play outside and the time a child is outside on weekdays in the summertime were significant predictors of total HRQOL measured by the KINDL-R. Obesity was not linked to HRQOL. Children with migration background had significantly higher values in the subscales "family" and "friends". Environmental factors are associated with HRQOL in children at the age of school enrollment but only partially of relevant use. Although they show significant associations, their explanatory power of the variability observed is rather limited. © Georg Thieme Verlag KG Stuttgart · New York.

Bike, walk, and wheel: a way of life in Columbia, Missouri.

PubMed

Thomas, Ian M; Sayers, Stephen P; Godon, Janet L; Reilly, Stacia R

2009-12-01

With funding support from the Robert Wood Johnson Foundation, the Active Living Partnership of Columbia, Missouri, sought to make routine physical activity more commonplace in the community through behavioral and environmental change strategies. The Active Living by Design 5P model (partnerships, promotions, programs, policy changes, and physical projects) was modified to create two mutually reinforcing components. Programs and promotions (e.g., Walking School Bus) were implemented to influence individual behaviors and generate public policy advocates. Policy changes, such as activity-friendly street design standards, created safe and attractive places for physical activity programs. A strong, diverse community partnership supported all efforts. Key project successes were a citywide social marketing program; the Walking School Bus program, which grew rapidly; and policy campaigns resulting in improved street design standards and a voter-approved $3.5 million sales tax for sidewalks around schools. Notable challenges included programs targeting teenagers and efforts to increase physical activity through self-reported activity logging. The most important lesson was to implement multiple strategies because programs can leverage policy successes, and new policies often lead to more funding for infrastructure. Other lessons learned were to build early successes by reaching first for the "low-hanging fruit" (e.g., elementary-age children rather than teenagers) and to have a flexible plan to take advantage of unexpected opportunities (e.g., a new, influential partner with a specific interest). A modified 5P model was tested and found to be an effective framework for achieving behavioral and environmental changes that promote healthy, active lifestyles in the community.

Field Testing of Environmentally Friendly Drilling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Burnett

2009-05-31

The Environmentally Friendly Drilling (EFD) program addresses new low-impact technology that reduces the footprint of drilling activities, integrates light weight drilling rigs with reduced emission engine packages, addresses on-site waste management, optimizes the systems to fit the needs of a specific development sites and provides stewardship of the environment. In addition, the program includes industry, the public, environmental organizations, and elected officials in a collaboration that addresses concerns on development of unconventional natural gas resources in environmentally sensitive areas. The EFD program provides the fundamentals to result in greater access, reasonable regulatory controls, lower development cost and reduction of themore » environmental footprint associated with operations for unconventional natural gas. Industry Sponsors have supported the program with significant financial and technical support. This final report compendium is organized into segments corresponding directly with the DOE approved scope of work for the term 2005-2009 (10 Sections). Each specific project is defined by (a) its goals, (b) its deliverable, and (c) its future direction. A web site has been established that contains all of these detailed engineering reports produced with their efforts. The goals of the project are to (1) identify critical enabling technologies for a prototype low-impact drilling system, (2) test the prototype systems in field laboratories, and (3) demonstrate the advanced technology to show how these practices would benefit the environment.« less

Recent trends in biological extraction of chitin from marine shell wastes: a review.

PubMed

Kaur, Surinder; Dhillon, Gurpreet Singh

2015-03-01

The natural biopolymer chitin and its deacetylated product chitosan are widely used in innumerable applications ranging from biomedicine, pharmaceuticals, food, agriculture and personal care products to environmental sector. The abundant and renewable marine processing wastes are commercially exploited for the extraction of chitin. However, the traditional chitin extraction processes employ harsh chemicals at elevated temperatures for a prolonged time which can harm its physico-chemical properties and are also held responsible for the deterioration of environmental health. In view of this, green extraction methods are increasingly gaining popularity due to their environmentally friendly nature. The bioextraction of chitin from crustacean shell wastes has been increasingly researched at the laboratory scale. However, the bioextraction of chitin is not currently exploited to its maximum potential on the commercial level. Bioextraction of chitin is emerging as a green, cleaner, eco-friendly and economical process. Specifically in the chitin extraction, microorganisms-mediated fermentation processes are highly desirable due to easy handling, simplicity, rapidity, controllability through optimization of process parameters, ambient temperature and negligible solvent consumption, thus reducing environmental impact and costs. Although, chitin production from crustacean shell waste through biological means is still at its early stage of development, it is undergoing rapid progress in recent years and showing a promising prospect. Driven by reduced energy, wastewater or solvent, advances in biological extraction of chitin along with valuable by-products will have high economic and environmental impact.

76 FR 37014 - Expedited Approval of Alternative Test Procedures for the Analysis of Contaminants Under the Safe...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

...; Analysis and Sampling Procedures AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY... Contaminants Under the Safe Drinking Water Act; Analysis and Sampling Procedures. 75 FR 32295. June 8, 2010...

Goals, Strategies

Science.gov Websites

stability Science & Innovation Collaboration Careers Community Environment Science & Innovation . Provide a safe, secure, and effective stockpile Protect against the nuclear threat Counter emerging excellence STRATEGY We will create a modern workplace that is environmentally responsible, safe, and secure

EnviroSafe Finding of Violation

EPA Pesticide Factsheets

This document outlines the U.S. Environmental Protection Agency reissuing an enclosed Finding of Violation (FOV) to Enviro-Safe Refrigerants, Inc. (you). We find that you have violated the Clean Air Act, 42 U.S.C. § 7413(a) (the CAA).

Dye sensitized solar cell based on environmental friendly eosin Y dye and Al doped titanium dioxide nano particles

NASA Astrophysics Data System (ADS)

Kulkarni, Swati S.; Bodkhe, Gajanan A.; Shirsat, Sumedh M.; Hussaini, S. S.; Shejwal, N. N.; Shirsat, Mahendra D.

2018-03-01

Present communication deals with the development of cost effective dye sensitized solar cell (DSSC) with eco-friendly materials. Eco-friendly Eosin Y dye was used to sensitize photo anode which was fabricated using undoped and Aluminium doped titanium dioxide (TiO2) nanoparticles. Undoped and Aluminium doped TiO2 nanoparticles were synthesized by simple and cost effective sol-gel method. Aluminium doped and undoped TiO2 nanoparticles were characterized using UV-visible, FT-IR spectroscopy, x-ray Diffraction, and Scanning Electron Micrograph with EDX. The photo-voltaic activity of the cell was studied under light irradiation of 100 milliwatt cm-2. Aluminium doped TiO2 nanoparticle photo electrode exhibits more than 60% increase in cell efficiency as compared to the undoped TiO2 nanoparticle photo electrode.

The Effect of Environmentally Friendly Wallpaper and Flooring Material on Indoor Air Quality and Atopic Dermatitis: A Pilot Study

PubMed Central

Na, Jung Im; Byun, Sang Young; Jeong, Mi Young; Park, Kyoung Chan

2014-01-01

Background Formaldehyde (FA) and other volatile organic compounds (VOCs) are considered among the main causes of atopic aggravation. Their main sources include wallpapers, paints, adhesives, and flooring materials. Objective To assess the effects of environmentally friendly wallpaper and flooring material on indoor air quality and atopic dermatitis severity. Methods Thirty patients with atopic dermatitis were enrolled in this study. To improve air quality, the wallpaper and flooring in the homes of the subjects were replaced with plant- or silica-based materials. The indoor air concentration of FA and the total VOCs (TVOCs) were measured before remodeling and 2, 6, and 10 weeks thereafter. Pruritus and the severity of atopic eczema were evaluated by using a questionnaire and the eczema area and severity index (EASI) score before and at 4, 8, and 12 weeks after remodeling. The subjects were instructed to continue their therapy for atopic dermatitis. Results The houses of 24 subjects were remodeled; all subjects completed the study. The concentration of FA in ambient air significantly decreased within 2 weeks after remodeling. The TVOC level showed a decrease at week 2 but increased again at weeks 6 and 10. The reduction of pruritus and EASI score was statistically significant in patients whose baseline EASI score was >3. Conclusion Replacing the wallpaper and flooring of houses with environmentally friendly material reduced FA in ambient air and improved pruritus and the severity of atopic eczema. The improvement of pruritus and eczema was statistically significant in patients whose baseline EASI score was >3. PMID:25473219

Investigation of gamma ray shielding efficiency and mechanical performances of concrete shields containing bismuth oxide as an environmentally friendly additive

NASA Astrophysics Data System (ADS)

Yao, Ya; Zhang, Xiaowen; Li, Mi; Yang, Rong; Jiang, Tianjiao; Lv, Junwen

2016-10-01

Concrete has a proven ability to attenuate gamma rays and neutrons without compromising structural property; therefore, it is widely used as the primary shielding material in many nuclear facilities. Recently, there is a tendency toward using various additives to enhance the shielding properties of these concrete mixtures. However, most of these additives being used either pose hygiene hazards or require special handling processes. It would be ideal if environmentally friendly additives were available for use. The bismuth oxide (Bi2O3) additive shows promise in various shielding applications due to its proven radiation attenuation ability and environmentally friendly nature. To the best of our knowledge, however, Bi2O3 has never been used in concrete mixtures. Therefore, for this research, we fabricated the Bi2O3-based concrete mixtures by adding Bi2O3 powder in the ordinary concrete mixture. Concrete mixtures with lead oxide (PbO) additives were used for comparison. Radiation shielding parameters like the linear attenuation coefficients (LAC) of all these concrete mixtures showing the effects of the Bi2O3 additions are presented. The mechanical performances of concrete mixtures incorporated with Bi2O3 additive were also investigated. It suggested that the concrete mixture containing 25% Bi2O3 powder (B5 in this study) provided the best shielding capacity and mechanical performance among other mixes. It has a significant potential for application as a structural concrete where radiological protection capability is required.

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

NASA Astrophysics Data System (ADS)

Deng, R.; Hu, Y. M.; Wang, L.; Li, Zh. H.; Shen, T.; Zhu, Y.; Xiang, J. Zh.

2017-04-01

Superamphiphobic Al surfaces were achieved via an easy and environmentally-friendly approach. Aqueous mixed solution of 0.7 M CuSO4 and 1 M NaCl was used to etch polished Al surfaces to fabricate a rough morphology distributed with microscale step-like pits. The uniformly distributed nanoscale petals covered on the microscale pits were obtained by subsequent 96 °C hot deionized water bathing for 13 min. Thus, the hierarchical micro/nanometer scale roughness was formed which provided the structural basic of superamphiphobic Al surfaces. By 1H, 1H, 2H, 2H-Perfluorodecyl-triethoxysilane (PFDTS) derivatization, desirable superamphiphobic Al surfaces were achieved with the highest static contact angles of 162° for water, 156° for peanut oil, respectively. Meanwhile, the sliding angles were lower than 10° for both water and peanut oil droplets. The as-prepared Al surfaces were investigated by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and optical contact angle measurements. The FE-SEM images of as-prepared Al surfaces showed a hierarchical micro/nanometer scale morphology. XPS analyses demonstrated the PFDTS derivitization on Al surfaces. The superamphiphobic Al surfaces presented good mechanical durability and chemical stability which have a wide range of applications in fields such as self-cleaning, anti-icing, anti-corrosion, oil transportation, energy harvesting, microfluidics, and so forth. The approach reported in this paper may easily realize the industrial production of superamphiphobic Al surfaces owing to the advantage of facile, low cost and environmentally-friendly.

Evaluation of green tea extract as a safe personal hygiene against viral infections.

PubMed

Lee, Yun Ha; Jang, Yo Han; Kim, Young-Seok; Kim, Jinku; Seong, Baik Lin

2018-01-01

Viral infections often pose tremendous public health concerns as well as economic burdens. Despite the availability of vaccines or antiviral drugs, personal hygiene is considered as effective means as the first-hand measure against viral infections. The green tea catechins, in particular, epigallocatechin-3-gallate (EGCG), are known to exert potent antiviral activity. In this study, we evaluated the green tea extract as a safe personal hygiene against viral infections. Using the influenza virus A/Puerto Rico/8/34 (H1N1) as a model, we examined the duration of the viral inactivating activity of green tea extract (GTE) under prolonged storage at various temperature conditions. Even after the storage for 56 days at different temperatures, 0.1% GTE completely inactivated 10 6 PFU of the virus (6 log 10 reduction), and 0.01% and 0.05% GTE resulted in 2 log 10 reduction of the viral titers. When supplemented with 2% citric acid, 0.1% sodium benzoate, and 0.2% ascorbic acid as anti-oxidant, the inactivating activity of GTE was temporarily compromised during earlier times of storage. However, the antiviral activity of the GTE was steadily recovered up to similar levels with those of the same concentrations of GTE without the supplements, effectively prolonging the duration of the virucidal function over extended period. Cryo-EM and DLS analyses showed a slight increase in the overall size of virus particles by GTE treatment. The results suggest that the virucidal activity of GTE is mediated by oxidative crosslinking of catechins to the viral proteins and the change of physical properties of viral membranes. The durability of antiviral effects of GTE was examined as solution type and powder types over extended periods at various temperature conditions using human influenza A/H1N1 virus. GTE with supplements demonstrated potent viral inactivating activity, resulting in greater than 4 log 10 reduction of viral titers even after storage for up to two months at a wide range of temperatures. These data suggest that GTE-based antiviral agents could be formulated as a safe and environmentally friendly personal hygiene against viral infections.

Biogeosystem technique as a method to overcome the Biological and Environmental Hazards of modern Agricultural, Irrigational and Technological Activities

NASA Astrophysics Data System (ADS)

Kalinitchenko, Valery; Batukaev, Abdulmalik; Zinchenko, Vladimir; Zarmaev, Ali; Magomadov, Ali; Chernenko, Vladimir; Startsev, Viktor; Bakoev, Serojdin; Dikaev, Zaurbek

2014-05-01

Modern challenge for humanity is to replace the paradigm of nature use and overcome environmental hazards of agronomy, irrigation, industry, and other human activities in biosphere. It is utterly reasonable to stop dividing biosphere on shares - the human habitat and the environment. In the 21st century it is an outdated anthropocentrism. Contradicting himself to biosphere Humankind has the problems. The new paradigm of biosphere control by methods of Biogeosystem technique is on agenda of Humankind. Key directions of Biogeosystem technique. Tillage. Single rotary milling 20…30-50…60 sm soil layer optimizes the evolution and environment of soil, creates a favorable conditions for the rhizosphere, increases the biological productivity of biosphere by 30-50% compared to the standard agricultural practices for the period up to 40 years. Recycle material. Recycling of mineral and organic substances in soil layer of 20…30-50…60 sm in rotary milling soil processing provides wastes clean return to biosphere. Direct intrasoil substances synthesis. Environmentally friendly robot wasteless nanotechnology provides direct substances synthesis, including fertilizers, inside the soil. It eliminates the prerequisites of the wastes formation under standard industrial technologies. Selective substance's extraction from soil. Electrochemical robotic nanotechnology provides selective substances extraction from soil. The technology provides recovery, collection and subsequent safe industrial use of extracted substances out of landscape. Saving fresh water. An important task is to save fresh water in biosphere. Irrigation spends water 4-5 times more of biological requirements of plants, leads to degradation of soil and landscape. The intrasoil pulse continuous-discrete paradigm of irrigation is proposed. It provides the soil and landscape conservation, increases the biological productivity, save the fresh water up to 10-20 times. The subsurface soil rotary processing and intrasoil pulsed continuous-discrete irrigation provide environmentally safe disposal of municipal, industrial, biological and agricultural wastes. Hazardous chemical and biological agents are under the soil surface. It provided a medical and veterinary safety of environment. Biogeosystem technic controls the equilibria in the soil and soil solution, prevents excessive mineralization of organic matter in the surface layers of soil. Simultaneously a soil chemical reduction excluded, biological substance do not degrade to gases. Products of organic matter decomposition are directed to the food chain, 100% waste recycling is obtained. Biogeosystems technique allows producing more biological products hence to recycle excessive amount of man-made CO2 and other substances. Biogeosystems technique increases the rate of photosynthesis of the biosphere, the degree of air ionization. This enhances the formation of rains over land, ensures stability of the ionosphere, magnetosphere and atmosphere of Earth. The nowadays technologies allow applying technical solutions based on Biogeosystem technique, there is unique opportunity to accelerate the noosphere new technological platform.

Profitability Implications of Sustainable Contracting

DTIC Science & Technology

2006-08-01

in a way that minimizes its impact on the environment. The environmental and social impacts of becoming green are at best positive and at worst...environmental, economic and social impacts of business [3-4]. The triple bottom line asserts that there is value created from being good stewards of the...reputation. Factor Services offered Sales volume Marketing efforts Friendly and helpful staff Past performance Rankings Most impact (1) (2) (3) (4) Least

Environmentally friendly pervious concrete for treating deicer-laden stormwater (phase one report).

DOT National Transportation Integrated Search

2015-12-30

A graphene oxide-modified pervious concrete was developed by using low-reactivity, high-calcium fly ash as sole binder and chemical : activators and other admixtures. The density, void ratio, mechanical strength, infiltration rate, Youngs modulus,...

Biobased, environmentally friendly lubricants for processing plants

USDA-ARS?s Scientific Manuscript database

Vegetable oil based lubricants have excellent lubricity, biodegradability, good viscosity temperature characteristics and low evaporation loss, but poor thermos-oxidative stability and cold flow properties. This paper presents a systematic approach to improve the oxidative and cold flow behavior of...

Biodegradable Pectin/clay Aerogels

USDA-ARS?s Scientific Manuscript database

Biodegradable, foamlike materials based on renewable pectin and sodium montmorillonite clay were fabricated through a simple, environmentally friendly freeze-drying process. Addition of multivalent cations (Ca2+ and Al3+) resulted in apparent crosslinking of the polymer, and enhancement of aerogel p...

Determining the Effects of Ethanol on Pump Station Facilities

DOT National Transportation Integrated Search

2010-04-23

Ethanol has been used for the last several years as an environmentally friendly alternative to methyl tertbutyl ether (MTBE), which is an oxygenate additive to gasoline, to increase octane levels, and to facilitate the combustion process. However, th...

COMPOSITES FROM RECYCLED WOOD AND PLASTICS

EPA Science Inventory

The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

COMPOSITES FROM RECYCLED WOOD AND PLASTICS

EPA Science Inventory

The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. wo processing technologies were used to prepare wood-plastic composites: air-laying and melt-...

California voting and suburbanization patterns : implications for transit policy.

DOT National Transportation Integrated Search

2013-07-01

Public transit is an environmentally friendly transportation mode that usually focuses on transporting people within and to the city : center. However, over the last 60 years, population and employment has been suburbanizing. As the median voter live...

Analyzing the impact of carbon regulatory mechanisms on supply chain management.

DOT National Transportation Integrated Search

2014-07-01

The objective of this research is developing a toolset for designing and managing cost : efficient and environmentally friendly supply chains for perishable products. : The models we propose minimize transportation and inventory holding costs in the ...

Exploring bicycle route choice behavior with space syntax analysis : final report.

DOT National Transportation Integrated Search

2016-12-31

Cycling provides an environmentally friendly alternative mode of transportation. It improves : urban mobility, livability, and public health, and it also helps in reducing traffic congestion and : emissions. Cycling is gaining popularity both as a re...

Toward Green Challenge Courses.

ERIC Educational Resources Information Center

Johnson, Karl E.

1999-01-01

Designing environmentally friendly challenge courses involves considering factors such as clearing, trees versus poles, soil erosion and compaction, toilet design, waste disposal, and carrying capacity. Strategies used in "green development" such as systems thinking, solution multipliers, and brainstorming with stakeholders could promote…

The General Atomics low speed urban Maglev technology development program

DOT National Transportation Integrated Search

2003-01-01

The overall objective of this program is to develop magnetic levitation technology that is a cost effective, reliable, : and environmentally friendly option for urban mass transportation in the United States. Maglev is a revolutionary : approach in w...

Environmentally Benign Production of Stretchable and Robust Superhydrophobic Silicone Monoliths.

PubMed

Davis, Alexander; Surdo, Salvatore; Caputo, Gianvito; Bayer, Ilker S; Athanassiou, Athanassia

2018-01-24

Superhydrophobic materials hold an enormous potential in sectors as important as aerospace, food industries, or biomedicine. Despite this great promise, the lack of environmentally friendly production methods and limited robustness remain the two most pertinent barriers to the scalability, large-area production, and widespread use of superhydrophobic materials. In this work, highly robust superhydrophobic silicone monoliths are produced through a scalable and environmentally friendly emulsion technique. It is first found that stable and surfactantless water-in-polydimethylsiloxane (PDMS) emulsions can be formed through mechanical mixing. Increasing the internal phase fraction of the precursor emulsion is found to increase porosity and microtexture of the final monoliths, rendering them superhydrophobic. Silica nanoparticles can also be dispersed in the aqueous internal phase to create micro/nanotextured monoliths, giving further improvements in superhydrophobicity. Due to the elastomeric nature of PDMS, superhydrophobicity can be maintained even while the material is mechanically strained or compressed. In addition, because of their self-similarity, the monoliths show outstanding robustness to knife-scratch, tape-peel, and finger-wipe tests, as well as rigorous sandpaper abrasion. Superhydrophobicity was also unchanged when exposed to adverse environmental conditions including corrosive solutions, UV light, extreme temperatures, and high-energy droplet impact. Finally, important properties for eventual adoption in real-world applications including self-cleaning, stain-repellence, and blood-repellence are demonstrated.

How safe do teenagers behave on Facebook? An observational study.

PubMed

Vanderhoven, Ellen; Schellens, Tammy; Valcke, Martin; Raes, Annelies

2014-01-01

The substantial use of social network sites by teenagers has raised concerns about privacy and security. Previous research about behavior on social network sites was mostly based on surveys and interviews. Observational research overcomes problems inherent to this research method, for example social desirability. However, existing observational research mostly focuses on public profiles of young adults. Therefore, the current observation-study includes 1050 public and non-public Facebook-profiles of teenagers (13-18) to investigate (1) what kind of information teenagers post on their profile, (2) to what extent they protect this information using privacy-settings and (3) how much risky information they have on their profile. It was found that young people mostly post pictures, interests and some basic personal information on their profile. Some of them manage their privacy-settings as such that this information is reserved for friends' eyes only, but a lot of information is accessible on the friends-of-friends' pages. Although general risk scores are rather low, more detailed analyses show that teenagers nevertheless post a significant amount of risky information. Moreover, older teenagers and girls post more (risky) information while there are no differences in applying privacy settings. We found no differences in the Facebook behavior of teenagers enrolled in different education forms. Implications of these results are discussed.

How Safe Do Teenagers Behave on Facebook? An Observational Study

PubMed Central

Vanderhoven, Ellen; Schellens, Tammy; Valcke, Martin; Raes, Annelies

2014-01-01

The substantial use of social network sites by teenagers has raised concerns about privacy and security. Previous research about behavior on social network sites was mostly based on surveys and interviews. Observational research overcomes problems inherent to this research method, for example social desirability. However, existing observational research mostly focuses on public profiles of young adults. Therefore, the current observation-study includes 1050 public and non-public Facebook-profiles of teenagers (13–18) to investigate (1) what kind of information teenagers post on their profile, (2) to what extent they protect this information using privacy-settings and (3) how much risky information they have on their profile. It was found that young people mostly post pictures, interests and some basic personal information on their profile. Some of them manage their privacy-settings as such that this information is reserved for friends' eyes only, but a lot of information is accessible on the friends-of-friends' pages. Although general risk scores are rather low, more detailed analyses show that teenagers nevertheless post a significant amount of risky information. Moreover, older teenagers and girls post more (risky) information while there are no differences in applying privacy settings. We found no differences in the Facebook behavior of teenagers enrolled in different education forms. Implications of these results are discussed. PMID:25162234

Art Safety.

ERIC Educational Resources Information Center

BCATA Journal for Art Teachers, 1991

1991-01-01

Advocating that Canadian art programs should use and model environmentally safe practices, the articles in this journal focus on issues of safe practices in art education. Articles are: (1) "What is WHMIS?"; (2) "Safety Precautions for Specific Art Processes"; (3) "Toxic Substances"; (4) "Using Clay, Glazes, and…

Human Behavior and Environmental Sustainability: promoting a pro-environmental behavior by harnessing the social, psychological and physical influences of the built environment

NASA Astrophysics Data System (ADS)

Abusafieh, Shaden; Razem, Maiss

2017-11-01

Recently, technological advancements in the sustainable design field have allowed us to reduce the ecological impact of the built environment, to reduce consumption of non-renewable resources, to create healthy environments and in some cases may even rehabilitate the ecosystem. Nevertheless, several studies have been carried out showing that sustainable technology does not automatically lead to environmentally friendly behaviors in its users. Various environmental problems threaten environmental sustainability and many of these problems are rooted in human behavior. Unfortunately, there is a lack in studies which take into consideration the human behavior influences within a sustainable built environment. We believe that the built environment should be used to support human goals and requirements, but at the same time we should consider it as a context in which human values and behaviors are cultivated. This research aimed to help in promoting environmental sustainability by using architectural design in changing relevant human behavior toward an environmentally friendly behavior. In order to achieve this, the research adopted Environment-centered Approach to gain more acute perspective into the relationship between the physical environment and human behavior, focusing on social, psychological and physical influences of the built environment. It appears that environmental psychology's merits have high potential in changing behavior within the built environment. The research provides a systematic approach for selecting, assessing, evaluating the behaviors to be changed and the factors that determine them. Furthermore, this approach helps in choosing the best interventions that could be applied in built environment to encourage such a sustainable behavior. This study tried to construct an agenda for further researches to find particular architectural design elements and strategies that we can harness to develop a pro-environment human behavior.

Biological synthesis of metallic nanoparticles using algae.

PubMed

Castro, Laura; Blázquez, María Luisa; Muñoz, Jesus Angel; González, Felisa; Ballester, Antonio

2013-09-01

The increasing demand and limited natural resources of noble metals make its recovery from dilute industrial wastes attractive, especially when using environmentally friendly methods. Nowadays, the high impact that nanotechnology is having in both science and society offers new research possibilities. Gold and silver nanoparticles were biosynthesised by a simple method using different algae as reducing agent. The authors explored the application of dead algae in an eco-friendly procedure. The nanoparticle formation was followed by UV-vis absorption spectroscopy and transmission electron microscopy. The functional groups involved in the bioreduction were studied by Fourier transform infrared spectroscopy.

Magnetic-confinement fusion

NASA Astrophysics Data System (ADS)

Ongena, J.; Koch, R.; Wolf, R.; Zohm, H.

2016-05-01

Our modern society requires environmentally friendly solutions for energy production. Energy can be released not only from the fission of heavy nuclei but also from the fusion of light nuclei. Nuclear fusion is an important option for a clean and safe solution for our long-term energy needs. The extremely high temperatures required for the fusion reaction are routinely realized in several magnetic-fusion machines. Since the early 1990s, up to 16 MW of fusion power has been released in pulses of a few seconds, corresponding to a power multiplication close to break-even. Our understanding of the very complex behaviour of a magnetized plasma at temperatures between 150 and 200 million °C surrounded by cold walls has also advanced substantially. This steady progress has resulted in the construction of ITER, a fusion device with a planned fusion power output of 500 MW in pulses of 400 s. ITER should provide answers to remaining important questions on the integration of physics and technology, through a full-size demonstration of a tenfold power multiplication, and on nuclear safety aspects. Here we review the basic physics underlying magnetic fusion: past achievements, present efforts and the prospects for future production of electrical energy. We also discuss questions related to the safety, waste management and decommissioning of a future fusion power plant.

Construction of target-specific virus-like particles for the delivery of algicidal compounds to harmful algae.

PubMed

Kang, Beom Sik; Eom, Chi-Yong; Kim, Wonduck; Kim, Pyoung Il; Ju, Sun Yi; Ryu, Jaewon; Han, Gui Hwan; Oh, Jeong-Il; Cho, Hoon; Baek, Seung Ho; Kim, Gueeda; Kim, Minju; Hyun, Jaekyung; Jin, EonSeon; Kim, Si Wouk

2015-04-01

Harmful algal blooms (HABs) can lead to substantial socio-economic losses and extensive damage to aquatic ecosystems, drinking water sources and human health. Common algicidal techniques, including ozonation, ultrasonic treatment and dispersion of algae-killing chemicals, are unsatisfactory both economically and ecologically. This study therefore presents a novel alternative strategy for the efficient control of deleterious algae via the use of host-specific virus-like particles (VLPs) combined with chemically synthesized algicidal compounds. The capsid protein of HcRNAV34, a single-stranded RNA virus that infects the toxic dinoflagellate, Heterocapsa circularisquama, was expressed in and purified from Escherichia coli and then self-assembled into VLPs in vitro. Next, the algicidal compound, thiazolidinedione 49 (TD49), was encapsidated into HcRNAV34 VLPs for specific delivery to H. circularisquama. Consequently, HcRNAV34 VLPs demonstrated the same host selectivity as naturally occurring HcRNAV34 virions, while TD49-encapsidated VLPs showed a more potent target-specific algicidal effect than TD49 alone. These results indicate that target-specific VLPs for the delivery of cytotoxic compounds to nuisance algae might provide a safe, environmentally friendly approach for the management of HABs in aquatic ecosystems. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

Evaluation of the effect of indigenous mycogenic silver nanoparticles on soil exo-enzymes in barite mine contaminated soils

NASA Astrophysics Data System (ADS)

Gaddam, Durga Prameela; Devamma, Nagalakshmi; Prasad, Tollamadugu Naga Venkata Krishna Vara

2015-04-01

The biosynthesis of nanoparticles has received increasing attention due to the growing need to develop safe, cost-effective and environmentally friendly technologies for nanoscale materials synthesis. In this report, silver nanoparticles (AgNPs) were synthesized by treating aqueous Ag+ ions with the culture supernatants of indigenous fungal species of Fusarium solani isolated from barite mine contaminated soils. The formation of AgNPs might be an enzyme-mediated extracellular reaction process. The localized surface plasmon resonance of the formed AgNPs was recorded using UV-VIS spectrophotometer and was characterized using the techniques transmission electron microscopy, particle size analyzer, Fourier transform-infrared spectroscopy (FT-IR), particle size (dynamic light scattering) and zeta potential. The synthesized AgNPs were stable, polydispersed with the average size of 80 nm. FT-IR spectra reveals that proteins and carboxylic groups present in the fungal secrets might be responsible for the reduction and stabilization of the silver ions. Applied to the barite mine contaminated soils, concentration of AgNPs and incubation period significantly influences the soil exo-enzymatic activities, viz., urease, phosphatase, dehydrogenase and β-glucosidase. To the best of our knowledge, this is the first report on this kind of work in barite mine contaminated soils.

Highly efficient extraction of anthocyanins from grape skin using deep eutectic solvents as green and tunable media.

PubMed

Jeong, Kyung Min; Zhao, Jing; Jin, Yan; Heo, Seong Rok; Han, Se Young; Yoo, Da Eun; Lee, Jeongmi

2015-12-01

Deep eutectic solvents (DESs) were investigated as tunable, environmentally benign, yet superior extraction media to enhance the extraction of anthocyanins from grape skin, which is usually discarded as waste. Ten DESs containing choline chloride as hydrogen bond acceptor combined with different hydrogen bond donors were screened for high extraction efficiencies based on the anthocyanin extraction yields. As a result, citric acid, D-(+)-maltose, and fructose were selected as the effective DES components, and the newly designed DES, CM-6 that is composed of citric acid and D-(+)-maltose at 4:1 molar ratio, exhibited significantly higher levels of anthocyanin extraction yields than conventional extraction solvents such as 80% aqueous methanol. The final extraction method was established based on the ultrasound-assisted extraction under conditions optimized using response surface methodology. Its extraction yields were double or even higher than those of conventional methods that are time-consuming and use volatile organic solvents. Our method is truly a green method for anthocyanin extraction with great extraction efficiency using a minimal amount of time and solvent. Moreover, this study suggested that grape skin, the by-products of grape juice processing, could serve as a valuable source for safe, natural colorants or antioxidants by use of the eco-friendly extraction solvent, CM-6.

Plant growth enhancing effects by a siderophore-producing endophytic streptomycete isolated from a Thai jasmine rice plant (Oryza sativa L. cv. KDML105).

PubMed

Rungin, Siriwan; Indananda, Chantra; Suttiviriya, Pavinee; Kruasuwan, Worarat; Jaemsaeng, Ratchaniwan; Thamchaipenet, Arinthip

2012-10-01

An endophytic Streptomyces sp. GMKU 3100 isolated from roots of a Thai jasmine rice plant (Oryza sativa L. cv. KDML105) showed the highest siderophore production on CAS agar while phosphate solubilization and IAA production were not detected. A mutant of Streptomyces sp. GMKU 3100 deficient in just one of the plant growth promoting traits, siderophore production, was generated by inactivation of a desD-like gene encoding a key enzyme controlling the final step of siderophore biosynthesis. Pot culture experiments revealed that rice and mungbean plants inoculated with the wild type gave the best enhancement of plant growth and significantly increased root and shoot biomass and lengths compared with untreated controls and siderophore-deficient mutant treatments. Application of the wild type in the presence or absence of ferric citrate significantly promoted plant growth of both plants. The siderophore-deficient mutant clearly showed the effect of this important trait involved in plant-microbe interaction in enhancement of growth in rice and mungbean plants supplied with sequestered iron. Our results highlight the value of a substantial understanding of the relationship of the plant growth promoting properties of endophytic actinomycetes to the plants. Endophytic actinomycetes, therefore, can be applied as potentially safe and environmentally friendly biofertilizers in agriculture.

Study of zwitterionic sulfopropylbetaine containing reactive siloxanes for application in antibacterial materials.

PubMed

Chen, Shiguo; Chen, Shaojun; Jiang, Song; Mo, Yangmiao; Luo, Junxuan; Tang, Jiaoning; Ge, Zaochuan

2011-07-01

Antibacterial agents receive a great deal of attention around the world due to the interesting academic problems of how to combat bacteria and of the beneficial health, social and economic effects of successful agents. Scientists are actively developing new antibacterial agents for biomaterial applications. This paper reports the novel antibacterial agent siloxane sulfopropylbetaine (SSPB), which contains reactive alkoxysilane groups. The structure and properties of SSPB were systematically investigated, with the results showing that SSPB contains both quaternary ammonium compounds and reactive siloxane groups. SSPB has good antibacterial activity against both Escherichia coli (E. coli, 8099) and Staphylococcus aureus (S. aureus, ATCC 6538). The minimal inhibition concentration is 70 μmol/ml SSPB against both E. coli and S. aureus. In addition, the SSPB antibacterial agent can be used in both weak acid and weak alkaline environments, functioning within the wide pH range of 4.0-9.0. The SSPB-modified glass surface killed 99.96% of both S. aureus and E. coli organisms within 24 h. No significant decrease was observed in this antibacterial activity after 20 washes. Moreover, SSPB does not induce a skin reaction and is nontoxic to animals. Thus, SSPB is an ideal candidate for future applications as a safe, environmentally friendly antibacterial agent. Copyright © 2011 Elsevier B.V. All rights reserved.

Development of ultracapacitor modules for 42-V automotive electrical systems

NASA Astrophysics Data System (ADS)

Jung, Do Yang; Kim, Young Ho; Kim, Sun Wook; Lee, Suck-Hyun

Two types of ultracapacitor modules have been developed for use as energy-storage devices for 42-V systems in automobiles. The modules show high performance and good reliability in terms of discharge and recharge capability, long-term endurance, and high energy and power. During a 42-V system simulation test of 6-kW power boosting/regenerative braking, the modules demonstrate very good performance. In high-power applications such as 42-V and hybrid vehicle systems, ultracapacitors have many merits compared with batteries, especially with respect to specific power at high rate, thermal stability, charge-discharge efficiency, and cycle-life. Ultracapacitors are also very safe, reliable and environmentally friendly. The cost of ultracapacitors is still high compared with batteries because of the low production scale, but is decreasing very rapidly. It is estimated that the cost of ultracapacitors will decrease to US$ 300 per 42-V module in the near future. Also, the maintenance cost of the ultracapacitor is nearly zero because of its high cycle-life. Therefore, the combined cost of the capacitor and maintenance will be lower than that of batteries in the near future. Overall, comparing performance, price and other parameters of ultracapacitors with batteries, ultracapacitors are the most likely candidate for energy-storage in 42-V systems.

A broad-spectrum, efficient and nontransgenic approach to control plant viruses by application of salicylic acid and jasmonic acid.

PubMed

Shang, Jing; Xi, De-Hui; Xu, Fei; Wang, Shao-Dong; Cao, Sen; Xu, Mo-Yun; Zhao, Ping-Ping; Wang, Jian-Hui; Jia, Shu-Dan; Zhang, Zhong-Wei; Yuan, Shu; Lin, Hong-Hui

2011-02-01

Plant viruses cause many diseases that lead to significant economic losses. However, most of the approaches to control plant viruses, including transgenic processes or drugs are plant-species-limited or virus-species-limited, and not very effective. We introduce an application of jasmonic acid (JA) and salicylic acid (SA), a broad-spectrum, efficient and nontransgenic method, to improve plant resistance to RNA viruses. Applying 0.06 mM JA and then 0.1 mM SA 24 h later, enhanced resistance to Cucumber mosaic virus (CMV), Tobacco mosaic virus (TMV) and Turnip crinkle virus (TCV) in Arabidopsis, tobacco, tomato and hot pepper. The inhibition efficiency to virus replication usually achieved up to 80-90%. The putative molecular mechanism was investigated. Some possible factors affecting the synergism of JA and SA have been defined, including WRKY53, WRKY70, PDF1.2, MPK4, MPK2, MPK3, MPK5, MPK12, MPK14, MKK1, MKK2, and MKK6. All genes involving in the synergism of JA and SA were investigated. This approach is safe to human beings and environmentally friendly and shows potential as a strong tool for crop protection against plant viruses.

Analytical Eco-Scale for Assessing the Greenness of a Developed RP-HPLC Method Used for Simultaneous Analysis of Combined Antihypertensive Medications.

PubMed

Mohamed, Heba M; Lamie, Nesrine T

2016-09-01

In the past few decades the analytical community has been focused on eliminating or reducing the usage of hazardous chemicals and solvents, in different analytical methodologies, that have been ascertained to be extremely dangerous to human health and environment. In this context, environmentally friendly, green, or clean practices have been implemented in different research areas. This study presents a greener alternative of conventional RP-HPLC methods for the simultaneous determination and quantitative analysis of a pharmaceutical ternary mixture composed of telmisartan, hydrochlorothiazide, and amlodipine besylate, using an ecofriendly mobile phase and short run time with the least amount of waste production. This solvent-replacement approach was feasible without compromising method performance criteria, such as separation efficiency, peak symmetry, and chromatographic retention. The greenness profile of the proposed method was assessed and compared with reported conventional methods using the analytical Eco-Scale as an assessment tool. The proposed method was found to be greener in terms of usage of hazardous chemicals and solvents, energy consumption, and production of waste. The proposed method can be safely used for the routine analysis of the studied pharmaceutical ternary mixture with a minimal detrimental impact on human health and the environment.

Planning Sustainable Land-Use: The Experience Of Stella, Missouri

EPA Science Inventory

Sustainability has numerous definitions and is often discussed. However, there are fewer lessons derived from its application. The concept for its application evolved out of a study to determine whether brownfields could be redeveloped to be more environmentally friendly. The ...

Locker Room Design Trends.

ERIC Educational Resources Information Center

Wiens, Janet

2001-01-01

Examines how today's college and university athletic locker rooms have become sophisticated recruiting tools that rival many professional facilities. Locker room design and location and their level of furniture, finishes, and equipment are discussed as is the trend for more environmentally friendly locker rooms. (GR)

Nanostructure enzyme assemblies for biomass conversion

USDA-ARS?s Scientific Manuscript database

Biomass represents a vast resource for production of the world’s fuel and chemical feedstock needs. The use of enzymes to effect these bioconversions offers an alternative that is potentially more specific and environmentally-friendly than harsher chemical methodologies. Some species of anaerobic ...

DEVELOPMENT OF SULFATE RADICAL-BASED CHEMICAL OXIDATION PROCESSES FOR TREATMENT OF PCBS

EPA Science Inventory

This study investigates transition metal based activation of peroxymonosulfate for generation of highly reactive sulfate radicals to degrade Polychlorinated Biphenyls (PCBs) in contaminated aqueous and sediment systems. Environmental friendly transition metal iron (Fe (II), Fe (I...

Calibrating the Iowa pore index with mercury intrusion porosimetry and petrography.

DOT National Transportation Integrated Search

2017-10-31

The Iowa Pore Index (IPI) test is a fast, non-destructive, inexpensive, and environmentally friendly test used by several Midwestern state departments of transportation to determine the volume ratio of macropores to micropores in a coarse rock aggreg...

Developing short-span alternatives to reinforced concrete box culvert structures in Kansas.

DOT National Transportation Integrated Search

2014-07-01

Concrete box culvert floor slabs are known to have detrimental effects on river and stream hydraulics. : Consequences include an aquatic environment less friendly to the passage of fish and other organisms. This has : prompted environmental regulatio...

Taking a Holistic Approach to Sustainability

ERIC Educational Resources Information Center

Girouard, Miles

2011-01-01

The benefits of sustainability go way beyond improving the environment. School districts that choose to build facilities using sustainable principles reap the benefits of environmentally friendly, healthy establishments; attractive work spaces (which improve recruiting and retention); and significant operational cost savings. Districts realize…

Technology and Environmental Education: Friend or Foe?

ERIC Educational Resources Information Center

Athman, Julie; Bates, Tim

1998-01-01

Discusses the pros and cons often mentioned concerning technology in education. Describes measures of effectiveness of technology-enhanced educational programs, ranging from active learning and multidisciplinary tasks to performance-based assessments. Argues that technology should enhance rather than replace direct experiences. (PVD)

Innovative technologies for anti-flammable cotton fabrics

USDA-ARS?s Scientific Manuscript database

Due to its environmentally friendly properties, supercritical carbon dioxide (scCO2) is considered in green chemistry as a substitute for organic solvents in chemical reactions. In this presentation, innovative approaches for preparation of flame retardant fabrics were obtained by utilizing supercr...

A Green Building on Campus.

ERIC Educational Resources Information Center

Rosenbaum, Mark

2002-01-01

Describes how techniques such as occupant control, careful sizing of the HVAC equipment, and using a direct digital control (DDC) system have helped the James L. and Evelena S. Oakes Hall at Vermont Law School to be environmentally friendly and save energy. (EV)

Wood adhesives containing proteins and carbohydrates

USDA-ARS?s Scientific Manuscript database

In recent years there has been resurgent interest in using biopolymers as sustainable and environmentally friendly ingredients in wood adhesive formulations. Among them, proteins and carbohydrates are the most commonly used. In this chapter, an overview is given of protein-based and carbohydrate-...

Magnesium-Based Corrosion Nano-Cells For Reductive Transformation Of Contaminants

EPA Science Inventory

Magnesium, with its potential to reduce a variety of aqueous contaminants, unique self-limiting corrosion behavior affording long active life times, natural abundance, low cost, and environmentally friendly nature, promises to be an effective technology. However, nanoparticles o...

Speedy fabrication of diameter-controlled Ag nanowires using glycerolunder microwave irradiation conditions

EPA Science Inventory

Diameter-controlled Ag nanowires were rapidly fabricated (1 min) using inexpensive, abundant, and environmentally-friendly glycerol as both reductant and solvent under non-stirred microwave irradiation conditions; no Ag particles were formed using conventional heating methods. Th...

On global energy scenario, dye-sensitized solar cells and the promise of nanotechnology.

PubMed

Reddy, K Govardhan; Deepak, T G; Anjusree, G S; Thomas, Sara; Vadukumpully, Sajini; Subramanian, K R V; Nair, Shantikumar V; Nair, A Sreekumaran

2014-04-21

One of the major problems that humanity has to face in the next 50 years is the energy crisis. The rising population, rapidly changing life styles of people, heavy industrialization and changing landscape of cities have increased energy demands, enormously. The present annual worldwide electricity consumption is 12 TW and is expected to become 24 TW by 2050, leaving a challenging deficit of 12 TW. The present energy scenario of using fossil fuels to meet the energy demand is unable to meet the increase in demand effectively, as these fossil fuel resources are non-renewable and limited. Also, they cause significant environmental hazards, like global warming and the associated climatic issues. Hence, there is an urgent necessity to adopt renewable sources of energy, which are eco-friendly and not extinguishable. Of the various renewable sources available, such as wind, tidal, geothermal, biomass, solar, etc., solar serves as the most dependable option. Solar energy is freely and abundantly available. Once installed, the maintenance cost is very low. It is eco-friendly, safely fitting into our society without any disturbance. Producing electricity from the Sun requires the installation of solar panels, which incurs a huge initial cost and requires large areas of lands for installation. This is where nanotechnology comes into the picture and serves the purpose of increasing the efficiency to higher levels, thus bringing down the overall cost for energy production. Also, emerging low-cost solar cell technologies, e.g. thin film technologies and dye-sensitized solar cells (DSCs) help to replace the use of silicon, which is expensive. Again, nanotechnological implications can be applied in these solar cells, to achieve higher efficiencies. This paper vividly deals with the various available solar cells, choosing DSCs as the most appropriate ones. The nanotechnological implications which help to improve their performance are dealt with, in detail. Additionally, the economic and ecological aspects of using nanotechnology are briefly introduced.

Environmental attitudes, knowledge, intentions and behaviors among college students.

PubMed

Levine, Debra Siegel; Strube, Michael J

2012-01-01

College students (N = 90) reported their pro-environment behaviors as well as their pro-environment intentions, their explicit and implicit attitudes about the environment, and their knowledge about environmental issues. Intentions and knowledge significantly and independently predicted behavior. Environmental knowledge was not significantly related to attitudes. Implicit and explicit attitudes were significantly but only moderately related. Only explicit attitudes, however, were strongly related to intentions, and intentions completely mediated the influence of explicit attitudes on behavior. Men were found to be more knowledgeable than women about environmental issues; older students had more favorable implicit and explicit environmental attitudes. This research suggests that knowledge about the environment and explicit attitudes influence behavior through different pathways, which may have implications for interventions seeking to increase environmentally friendly behavior.

Has the question of e-waste opened a Pandora's box? An overview of unpredictable issues and challenges.

PubMed

Bakhiyi, Bouchra; Gravel, Sabrina; Ceballos, Diana; Flynn, Michael A; Zayed, Joseph

2018-01-01

Despite regulatory efforts and position papers, electrical and electronic waste (e-waste) remains ill-managed as evidenced by the extremely low rates of proper e-waste recycling (e-recycling) worldwide, ongoing illegal shipments to developing countries and constantly reported human health issues and environmental pollution. The objectives of this review are, first, to expose the complexity of e-waste problems, and then to suggest possible upstream and downstream solutions. Exploring e-waste issues is akin to opening a Pandora's box. Thus, a review of prevailing e-waste management practices reveals complex and often intertwined gaps, issues and challenges. These include the absence of any consistent definition of e-waste to date, a prevalent toxic potential still involving already banned or restricted hazardous components such as heavy metals and persistent and bioaccumulative organic compounds, a relentless growth in e-waste volume fueled by planned obsolescence and unsustainable consumption, problematic e-recycling processes, a fragile formal e-recycling sector, sustained and more harmful informal e-recycling practices, and more convoluted and unpredictable patterns of illegal e-waste trade. A close examination of the e-waste legacy contamination reveals critical human health concerns, including significant occupational exposure during both formal and informal e-recycling, and persistent environmental contamination, particularly in some developing countries. However, newly detected e-waste contaminants as well as unexpected sources and environmental fates of contaminants are among the emerging issues that raise concerns. Moreover, scientific knowledge gaps remain regarding the complexity and magnitude of the e-waste legacy contamination, specifically, a comprehensive characterization of e-waste contaminants, information on the scale of legacy contamination in developing countries and on the potential environmental damage in developed countries, and a stronger body of evidence of adverse health effects specifically ascribed to e-waste contaminants. However, the knowledge accumulated to date is sufficient to raise awareness and concern among all stakeholders. Potential solutions to curb e-waste issues should be addressed comprehensively, by focusing on two fronts: upstream and downstream. Potential upstream solutions should focus on more rational and eco-oriented consumer habits in order to decrease e-waste quantities while fostering ethical and sustained commitments from manufacturers, which include a limited usage of hazardous compounds and an optimal increase in e-waste recyclability. At the downstream level, solutions should include suitable and pragmatic actions to progressively reduce the illegal e-waste trade particularly through international cooperation and coordination, better enforcement of domestic laws, and monitoring in both exporting and receiving countries, along with the supervised integration of the informal sector into the recycling system of developing countries and global expansion of formal e-waste collection and recycling activities. Downstream solutions should also introduce stronger reverse logistics, together with upgraded, more affordable, and eco-friendly and worker-friendly e-recycling technologies to ensure that benefits are derived fully and safely from the great economic potential of e-waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental Hazards in the Child Care Center.

ERIC Educational Resources Information Center

Gratz, Rene; Boulton, Pamla

1993-01-01

Presents research findings regarding the susceptibility of young children to various indoor environmental pollutants including cigarette smoke, heating and cooking equipment, art supplies, lead, and asbestos. Discusses assessment, management, and prevention of environmental hazards to provide guidelines for achieving a safe child care environment.…

Use and safety perceptions regarding herbal supplements: a study of older persons in southeast Idaho.

PubMed

Snyder, Frank J; Dundas, Mary L; Kirkpatrick, Carol; Neill, Karen S

2009-01-01

Herbal supplements (HS) are used by older persons and are often perceived as safe, although there is limited research that examines why this perception exists. A questionnaire was developed and pilot tested to investigate the use and perceived safety of HS among a convenience sample of 112 adults aged 60 to 92 in southeast Idaho. Fifty-five percent of the participants (n = 62) reported using HS in the past. Ninety-five percent (n = 59) of those using HS and 75% (n = 37) of nonusers reported they believed most or some HS were safe. Perception of herbal supplement safety was greatly influenced by family and friends, and HS users had a greater perception of safety than nonusers (p < or = .001). The top reasons for perceived safety given by HS users were that HS: (1) can be purchased without a prescription, (2) can be purchased in many locations, and (3) are natural.

Pre-existing immunity against vaccine vectors – friend or foe?

PubMed Central

Saxena, Manvendra; Van, Thi Thu Hao; Baird, Fiona J.; Coloe, Peter J.

2013-01-01

Over the last century, the successful attenuation of multiple bacterial and viral pathogens has led to an effective, robust and safe form of vaccination. Recently, these vaccines have been evaluated as delivery vectors for heterologous antigens, as a means of simultaneous vaccination against two pathogens. The general consensus from published studies is that these vaccine vectors have the potential to be both safe and efficacious. However, some of the commonly employed vectors, for example Salmonella and adenovirus, often have pre-existing immune responses in the host and this has the potential to modify the subsequent immune response to a vectored antigen. This review examines the literature on this topic, and concludes that for bacterial vectors there can in fact, in some cases, be an enhancement in immunogenicity, typically humoral, while for viral vectors pre-existing immunity is a hindrance for subsequent induction of cell-mediated responses. PMID:23175507

Informatics in Radiology (infoRAD): personal computer security: part 2. Software Configuration and file protection.

PubMed

Caruso, Ronald D

2004-01-01

Proper configuration of software security settings and proper file management are necessary and important elements of safe computer use. Unfortunately, the configuration of software security options is often not user friendly. Safe file management requires the use of several utilities, most of which are already installed on the computer or available as freeware. Among these file operations are setting passwords, defragmentation, deletion, wiping, removal of personal information, and encryption. For example, Digital Imaging and Communications in Medicine medical images need to be anonymized, or "scrubbed," to remove patient identifying information in the header section prior to their use in a public educational or research environment. The choices made with respect to computer security may affect the convenience of the computing process. Ultimately, the degree of inconvenience accepted will depend on the sensitivity of the files and communications to be protected and the tolerance of the user. Copyright RSNA, 2004

Design of a safe cylindrical lithium/thionyl chloride cell

NASA Technical Reports Server (NTRS)

Johnson, D. H.

1983-01-01

Cell design criteria were established which can result in a safe lithium/thionyl chloride cell. A cell vent, a low area internal anode cell, cell balance and composition of the cathode-electrolyte solution were found to be important factors in the design of a safe cell. In addition to routine testing, both undischarged and discharged cells were subjected to electrical abuse, environmental abuse and mechanical abuse without disassembly.