9 CFR 416.4 - Sanitary operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... compounds, sanitizing agents, processing aids, and other chemicals used by an establishment must be safe and effective under the conditions of use. Such chemicals must be used, handled, and stored in a manner that... a chemical's use in a food processing environment must be available to FSIS inspection program...

Health Care Ergonomics: Contributions of Thomas Waters.

PubMed

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

Saving our backs: safe patient handling and mobility for home care.

PubMed

Beauvais, Audrey; Frost, Lenore

2014-01-01

Predicted work-related injuries for nurses and home healthcare workers are on the rise given the many risk factors in the home environment and the escalating demands for home healthcare workers in the United States. Fortunately, safe patient handling and mobility programs can dramatically decrease injuries. Despite strides being made to promote safe patient handling and mobility programs in acute care, more can be done to establish such initiatives in the home care setting.

78 FR 4324 - Occupational Exposure to Hazardous Chemicals in Laboratories (Non-Mandatory Appendix); Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... institutions that sponsor chemical laboratories accountable for providing safe working environments. Beyond... current laboratory practices, security, and emergency response, as well as promoting safe handling of.... Safety and training programs have been implemented to promote the safe handling of chemicals from...

Nurses' Attitudes Regarding the Safe Handling of Patients Who Are Morbidly Obese: Instrument Development and Psychometric Analysis.

PubMed

Bejciy-Spring, Susan; Vermillion, Brenda; Morgan, Sally; Newton, Cheryl; Chucta, Sheila; Gatens, Cindy; Zadvinskis, Inga; Holloman, Christopher; Chipps, Esther

2016-12-01

Nurses' attitudes play an important role in the consistent practice of safe patient handling behaviors. The purposes of this study were to develop and assess the psychometric properties of a newly developed instrument measuring attitudes of nurses related to the care and safe handling of patients who are obese. Phases of instrument development included (a) item generation, (b) content validity assessment, (c) reliability assessment, (d) cognitive interviewing, and (e) construct validity assessment through factor analysis. The final data from the exploratory factor analysis produced a 26-item multidimensional instrument that contains 9 subscales. Based on the factor analysis, a 26-item instrument can be used to examine nurses' attitudes regarding patients who are morbidly obese and related safe handling practices.

Safe Patient Handling and Mobility: Development and Implementation of a Large-Scale Education Program.

PubMed

Lee, Corinne; Knight, Suzanne W; Smith, Sharon L; Nagle, Dorothy J; DeVries, Lori

This article addresses the development, implementation, and evaluation of an education program for safe patient handling and mobility at a large academic medical center. The ultimate goal of the program was to increase safety during patient mobility/transfer and reduce nursing staff injury from lifting/pulling. This comprehensive program was designed on the basis of the principles of prework, application, and support at the point of care. A combination of online learning, demonstration, skill evaluation, and coaching at the point of care was used to achieve the goal. Specific roles and responsibilities were developed to facilitate implementation. It took 17 master trainers, 88 certified trainers, 176 unit-based trainers, and 98 coaches to put 3706 nurses and nursing assistants through the program. Evaluations indicated both an increase in knowledge about safe patient handling and an increased ability to safely mobilize patients. The challenge now is sustainability of safe patient-handling practices and the growth and development of trainers and coaches.

Tritium handling experience at Atomic Energy of Canada Limited

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suppiah, S.; McCrimmon, K.; Lalonde, S.

2015-03-15

Canada has been a leader in tritium handling technologies as a result of the successful CANDU reactor technology used for power production. Over the last 50 to 60 years, capabilities have been established in tritium handling and tritium management in CANDU stations, tritium removal processes for heavy and light water, tritium measurement and monitoring, and understanding the effects of tritium on the environment. This paper outlines details of tritium-related work currently being carried out at Atomic Energy of Canada Limited (AECL). It concerns the CECE (Combined Electrolysis and Catalytic Exchange) process for detritiation, tritium-compatible electrolysers, tritium permeation studies, and tritiummore » powered batteries. It is worth noting that AECL offers a Tritium Safe-Handling Course to national and international participants, the course is a mixture of classroom sessions and hands-on practical exercises. The expertise and facilities available at AECL is ready to address technological needs of nuclear fusion and next-generation nuclear fission reactors related to tritium handling and related issues.« less

Barriers and Facilitators to Safe Food Handling among Consumers: A Systematic Review and Thematic Synthesis of Qualitative Research Studies

PubMed Central

Young, Ian; Waddell, Lisa

2016-01-01

Foodborne illness has a substantial health and economic burden on society, and most cases are believed to be due to unsafe food handling practices at home. Several qualitative research studies have been conducted to investigate consumers’ perspectives, opinions, and experiences with safe food handling at home, and these studies provide insights into the underlying barriers and facilitators affecting their safe food handling behaviours. We conducted a systematic review of previously published qualitative studies in this area to synthesize the main across-study themes and to develop recommendations for future consumer interventions and research. The review was conducted using the following steps: comprehensive search strategy; relevance screening of abstracts; relevance confirmation of articles; study quality assessment; thematic synthesis of the results; and quality-of-evidence assessment. A total of 39 relevant articles reporting on 37 unique qualitative studies were identified. Twenty-one barriers and 10 facilitators to safe food handling were identified, grouped across six descriptive themes: confidence and perceived risk; knowledge-behaviour gap; habits and heuristics; practical and lifestyle constraints; food preferences; and societal and social influences. Our overall confidence that each barrier and facilitator represents the phenomenon of interest was rated as high (n = 11), moderate (11), and low (9). Overarching analytical themes included: 1) safe food handling behaviours occur as part of a complex interaction of everyday consumer practices and habituation; 2) most consumers are not concerned about food safety and are generally not motivated to change their behaviours based on new knowledge about food safety risks; and 3) consumers are amenable to changing their safe food handling habits through relevant social pressures. Key implications and recommendations for research, policy and practice are discussed. PMID:27907161

Microbiological Sampling Procedures

USDA-ARS?s Scientific Manuscript database

Detection and enumeration of microorganisms are an important part of providing to consumers, safe foods of high quality. Determining the presence and/or numbers of certain bacteria and fungi may be directly or indirectly related to facility sanitation, hygiene of handling and processing, quality an...

Unique and massive Chernobyl cranes for deconstruction activities in the new safe confinement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parameswaran, N. A. Vijay; Chornyy, Igor; Owen, Rob

2013-07-01

On 26 April 1986, the worst nuclear power plant accident in history occurred at the Chernobyl plant in Ukraine (then part of the Soviet Union). The destruction of Unit 4 sent highly radioactive fallout over Belarus, Russia, Ukraine, and Europe. The object shelter-a containment sarcophagus-was built in November 1986 to limit exposure to radiation. However, it has only a planned 25-year lifespan and would probably not survive even a moderate seismic event in a region that has more than its share of such events. It was time to take action. One of the largest tasks that are in progress ismore » the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant Unit. One of the major mechanical handling systems to be installed in the new safe confinement is the Main Cranes System. The planned decontamination and decommissioning or dismantling activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the new safe confinement, will require large and sophisticated cranes. The article will focus on the current progress of the new safe confinement and of the main cranes system for the decommissioning or dismantling activities. (authors)« less

40 CFR 180.435 - Deltamethrin; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in food handling establishments, including food service, manufacturing and processing establishments.... Contamination of food/feed or food/feed contact surfaces shall be avoided. (B) To assure safe use of the...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

Microbiological Sampling Procedures for Eggs

USDA-ARS?s Scientific Manuscript database

Detection and enumeration of microorganisms are an important part of providing to consumers, safe foods of high quality. Determining the presence and/or numbers of certain bacteria and fungi may be directly or indirectly related to facility sanitation, hygiene of handling and processing, quality an...

76 FR 5340 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... inclement weather, NMFS cancelled the Protected Species Safe Handling, Release, and Identification workshop..., 2011, due to inclement weather along the east coast of the United States on the date of the originally...

Development of a safety decision-making scenario to measure worker safety in agriculture.

PubMed

Mosher, G A; Keren, N; Freeman, S A; Hurburgh, C R

2014-04-01

Human factors play an important role in the management of occupational safety, especially in high-hazard workplaces such as commercial grain-handling facilities. Employee decision-making patterns represent an essential component of the safety system within a work environment. This research describes the process used to create a safety decision-making scenario to measure the process that grain-handling employees used to make choices in a safety-related work task. A sample of 160 employees completed safety decision-making simulations based on a hypothetical but realistic scenario in a grain-handling environment. Their choices and the information they used to make their choices were recorded. Although the employees emphasized safety information in their decision-making process, not all of their choices were safe choices. Factors influencing their choices are discussed, and implications for industry, management, and workers are shared.

Thermal Catalytic Oxidation of Airborne Contaminants by a Reactor Using Ultra-Short Channel Length, Monolithic Catalyst Substrates

NASA Technical Reports Server (NTRS)

Perry, J. L.; Tomes, K. M.; Tatara, J. D.

2005-01-01

Contaminated air, whether in a crewed spacecraft cabin or terrestrial work and living spaces, is a pervasive problem affecting human health, performance, and well being. The need for highly effective, economical air quality processes spans a wide range of terrestrial and space flight applications. Typically, air quality control processes rely on absorption-based processes. Most industrial packed-bed adsorption processes use activated carbon. Once saturated, the carbon is either dumped or regenerated. In either case, the dumped carbon and concentrated waste streams constitute a hazardous waste that must be handled safely while minimizing environmental impact. Thermal catalytic oxidation processes designed to address waste handling issues are moving to the forefront of cleaner air quality control and process gas decontamination processes. Careful consideration in designing the catalyst substrate and reactor can lead to more complete contaminant destruction and poisoning resistance. Maintenance improvements leading to reduced waste handling and process downtime can also be realized. Performance of a prototype thermal catalytic reaction based on ultra-short waste channel, monolith catalyst substrate design, under a variety of process flow and contaminant loading conditions, is discussed.

Practical Tips for the Safe Handling of Micro-organisms in Schools

ERIC Educational Resources Information Center

Holt, G.

1974-01-01

Outlines safe laboratory procedures for the handling of micro-organisms including aseptic technique, manipulation of cultures, and treatment of contaminated equipment. Identifies the principal hazard as the microbial aerosol, explains its possible effects, and describes the appropriate precautions. (GS)

Helping Students with Disabilities Deal with Acts of Terrorism.

ERIC Educational Resources Information Center

Friehe, Mary J. (Morris); Swain, Kristine D.

2002-01-01

This article discusses the special needs of students with cognitive or language-processing disabilities in dealing with tragedy, including acts of terrorism. Specific suggestions for helping students cope are given for the following areas: feeling safe, handling emotion, and developing understanding. (Contains references.) (Author/DB)

Texas passes first law for safe patient handling in America: landmark legislation protects health-care workers and patients from injury related to manual patient lifting.

PubMed

Hudson, Mary Anne

2005-01-01

On June 17,2005, Texas Governor Rick Perry (R) signed into law Senate Bill 1525, making Texas the first state in the nation to require hospitals and nursing homes to implement safe patient handling and movement programs. Governor Perry is to be commended for this heroic first stand for safe patient handling in America. The landmark legislation will take effect January 1, 2006, requiring the establishment of policy to identify, assess, and develop methods of controlling the risk of injury to patients and nurses associated with lifting, transferring, repositioning, and movement of patients; evaluation of alternative methods from manual lifting to reduce the risk of injury from patient lifting, including equipment and patient care environment; restricting, to the extent feasible with existing equipment, manual handling of all or most of a patient's weight to emergency, life-threatening, or exceptional circumstances; and provision for refusal to perform patient handling tasks believed to involve unacceptable risks of injury to a patient or nurse. Manually lifting patients has been called deplorable, inefficient, dangerous to nurses, and painful and brutal to patients; manual lifting can cause needless suffering and injury to patients, with dangers including pain, bruising, skin tears, abrasions, tube dislodgement, dislocations, fractures, and being dropped by nursing staff during attempts to manually lift. Use of safe, secure, mechanical lift equipment and gentle friction-reducing devices for patient maneuvering tasks could eliminate such needless brutality. Research has proven that manual patient lifting is extremely hazardous to health-care workers, creating substantial risk of low-back injury, whether with one or two patient handlers. Studies on the use of mechanical patient lift equipment, by either nursing staff or lift teams, have proven repeatedly that most nursing staff back injury is preventable, leading to substantial savings to employers on medical and compensation costs. Because the health-care industry has relied on people to do the work of machines, nursing work remains the most dangerous occupation for disabling back injury. Back injury from patient lifting may be the single largest contributor to the nursing shortage, with perhaps 12% of nurses leaving or being terminated because of back injury. The US health-care industry has not kept pace with other industries, which provide mechanical lift equipment for lifting loads equivalent to the weight of patients, or with other countries, such as Australia and England, which are more advanced in their use of modern technology for patient lifting and with no-lifting practices in compliance with government regulations and nursing policies banning manual lifting. With Texas being the first state to succeed in passing legislation for safe patient handling, other states are working toward legislative protection against injury with manual patient lifting. California re-introduced safe patient handling legislation on February 17, 2005, with CA SB 363, Hospitals: Lift Teams, following the September 22, 2004, veto of CA AB 2532 by Governor Arnold Schwarzenegger, who said he believes existing statutory protection and workplace safety standards are sufficient to protect health care workers from injury. Massachusetts HB 2662, Relating to Safe Patient Handling in Certain Health Facilities, was introduced December 1, 2004. Ohio HB 67, signed March 21, 2005 by Governor Bob Taft (R), creates a program for interest-free loans to nursing homes for implementation of a no-manual-lift program. New York companion bills AB 7641 and SB 4029 were introduced in April, 2005, calling for creation of a 2-year study to establish safe patient handling programs and collect data on nursing staff and patient injury with manual patient handling versus lift equipment, to determine best practices for improving health and safety of health-care workers and patients during patient handling. Washington State is planning re-introduction of safe patient handling legislation, after WA HB 1672, Relating to reducing injuries among patients and health care workers, was stalled in committee in February, 2005. Language from these state initiatives may be used as models to assist other states with drafting safe patient handling legislation. Rapid enactment of a federal mandate for Safe Patient Handling No Manual Lift is essential and anticipated.

Thermodynamic processes associated with frostbite in the handling of liquid nitrogen

NASA Astrophysics Data System (ADS)

Johnson, W. L.; Cook, C. R.

2014-01-01

It is often taught that exposure to liquid nitrogen will cause frostbite or more severe damage to exposed skin tissue. However, it is also demonstrated that a full hand can be briefly immersed in liquid nitrogen without damage. To better understand and possibly visualize the effects of human tissue exposure to liquid nitrogen, a series of tests were conducted using simulated hands and arms composed of molded gelatin forms. The simulated hands and arms were immersed, sprayed, or splashed with liquid nitrogen both with and without state of the art personal protective equipment. Thermocouples were located within the test articles to allow for thermal mapping during the freezing process. The study is aimed to help understand frostbite hazards and the time constants involved with the handling of liquid nitrogen to improve future safety protocols for the safe handling of cryogenic fluids. Results of the testing also show the limits to handling liquid nitrogen while using various means of protection.

Comparison of food safety cognitions and self-reported food-handling behaviors with observed food safety behaviors of young adults.

PubMed

Abbot, J M; Byrd-Bredbenner, C; Schaffner, D; Bruhn, C M; Blalock, L

2009-04-01

Developing tailored and effective food safety education for young adults is critical given their future roles as caregivers likely to be preparing food for populations who may be at greater risk for foodborne disease (FBD). The objective of this study was to examine the relationship between food safety self-reported food-handling behaviors and cognitions of young adults to observed food-handling behaviors. Participants were 153 young adults (mean age 20.74+/-1.30 s.d.) attending a major American university. Each prepared a meal under observation in a controlled laboratory setting, permitted researchers to observe their home kitchen and completed an online survey assessing food safety knowledge, behavior and psychosocial measures. Descriptive statistics were generated for participants' self-reported food-handling behaviors, psychosocial characteristics, knowledge, food preparation observations and home kitchen observations. Determinants of compliance with safe food-handling procedures while preparing a meal and home food storage/rotation practices were identified using backward regression models. Participants engaged in less than half of the recommended safe food-handling practices evaluated and correctly answered only two-thirds of the food safety knowledge items. They reported positive food safety beliefs and high food safety self-efficacy. Self-reported compliance with cross-contamination prevention, disinfection procedures and knowledge of groups at greatest risk for FBD were the best measures for predicting compliance with established safe food-handling practices. Food safety education directed toward young adults should focus on increasing awareness of FBD and knowledge of proper cross-contamination prevention procedures to help promote better compliance with actual safe food handling.

75 FR 29991 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... certificate in order to fish with or renew their limited-access shark and limited-access swordfish permits... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification... (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification...

Waste Controls at Base Metal Mines

ERIC Educational Resources Information Center

Bell, Alan V.

1976-01-01

Mining and milling of copper, lead, zinc and nickel in Canada involves an accumulation of a half-million tons of waste material each day and requires 250 million gallons of process water daily. Waste management considerations for handling large volumes of wastes in an economically and environmentally safe manner are discussed. (BT)

Food Safety Posters for Safe Handling of Leafy Greens

ERIC Educational Resources Information Center

Rajagopal, Lakshman; Arendt, Susan W.; Shaw, Angela M.; Strohbehn, Catherine H.; Sauer, Kevin L.

2016-01-01

This article describes food safety educational tools depicting safe handling of leafy greens that are available as downloadable posters to Extension educators and practitioners (www.extension.iastate.edu). Nine visual-based minimal-text colored posters in English, Chinese, and Spanish were developed for use when formally or informally educating…

78 FR 34349 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

... January 1, 2007, shark limited-access and swordfish limited- access permit holders who fish with longline... next permit renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

76 FR 34209 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-13

... swordfish or shark permit and that use longline or gillnet gear may not fish unless both the vessel owner... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification...

76 FR 59661 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... shark permit and that use longline or gillnet gear may not fish unless both the vessel owner and... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and... Administration (NOAA), Commerce. ACTION: Notice of public workshops. SUMMARY: Free Atlantic Shark Identification...

78 FR 73500 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

... January 1, 2007, shark limited-access and swordfish limited- access permit holders who fish with longline... next permit renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

77 FR 32950 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-04

... renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited-access permits. Additionally, new shark and swordfish limited- access permit applicants who intend to fish with longline or... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

75 FR 8304 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited access permits. Additionally, new shark and swordfish limited access permit applicants who intend to fish with longline or... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification...

AthenaMT: upgrading the ATLAS software framework for the many-core world with multi-threading

NASA Astrophysics Data System (ADS)

Leggett, Charles; Baines, John; Bold, Tomasz; Calafiura, Paolo; Farrell, Steven; van Gemmeren, Peter; Malon, David; Ritsch, Elmar; Stewart, Graeme; Snyder, Scott; Tsulaia, Vakhtang; Wynne, Benjamin; ATLAS Collaboration

2017-10-01

ATLAS’s current software framework, Gaudi/Athena, has been very successful for the experiment in LHC Runs 1 and 2. However, its single threaded design has been recognized for some time to be increasingly problematic as CPUs have increased core counts and decreased available memory per core. Even the multi-process version of Athena, AthenaMP, will not scale to the range of architectures we expect to use beyond Run2. After concluding a rigorous requirements phase, where many design components were examined in detail, ATLAS has begun the migration to a new data-flow driven, multi-threaded framework, which enables the simultaneous processing of singleton, thread unsafe legacy Algorithms, cloned Algorithms that execute concurrently in their own threads with different Event contexts, and fully re-entrant, thread safe Algorithms. In this paper we report on the process of modifying the framework to safely process multiple concurrent events in different threads, which entails significant changes in the underlying handling of features such as event and time dependent data, asynchronous callbacks, metadata, integration with the online High Level Trigger for partial processing in certain regions of interest, concurrent I/O, as well as ensuring thread safety of core services. We also report on upgrading the framework to handle Algorithms that are fully re-entrant.

Trends in U.S. consumers' safe handling and consumption of food and their risk perceptions, 1988 through 2010.

PubMed

Fein, Sara B; Lando, Amy M; Levy, Alan S; Teisl, Mario F; Noblet, Caroline

2011-09-01

Although survey results measuring the safety of consumers' food handling and risky food consumption practices have been published for over 20 years, evaluation of trends is impossible because the designs of published studies are not comparable. The Food Safety Surveys used comparable methods to interview U.S. adults by telephone in 1988, 1993, 2001, 2006, and 2010 about food handling (i.e., cross-contamination prevention) and risky consumption practices (eating raw or undercooked foods from animals) and perceived risk from foodborne illness. Sample sizes ranged from 1,620 to 4,547. Responses were analyzed descriptively, and four indices measuring meat, chicken, and egg cross-contamination, fish cross-contamination, risky consumption, and risk perceptions were analyzed using generalized linear models. The extent of media coverage of food safety issues was also examined. We found a substantial improvement in food handling and consumption practices and an increase in perceived risk from foodborne illness between 1993 and 1998. All indices were stable or declined between 1998 and 2006. Between 2006 and 2010, the two safe food handling practice indices increased significantly, but risk perceptions did not change, and safe consumption declined. Women had safer food handling and consumption practices than men. The oldest and youngest respondents and those with the highest education had the least safe food handling behaviors. Changes in safety of practices over the survey years are consistent with the change in the number of media stories about food safety in the periods between surveys. This finding suggests that increased media attention to food safety issues may raise awareness of food safety hazards and increase vigilance in food handling by consumers.

Guidelines for safe handling of hazardous drugs: A systematic review

PubMed Central

Bernabeu-Martínez, Mari A.; Ramos Merino, Mateo; Santos Gago, Juan M.; Álvarez Sabucedo, Luis M.; Wanden-Berghe, Carmina

2018-01-01

Objective To review the scientific literature related to the safe handling of hazardous drugs (HDs). Method Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. Results In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Conclusions Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion. PMID:29750798

Guidelines for safe handling of hazardous drugs: A systematic review.

PubMed

Bernabeu-Martínez, Mari A; Ramos Merino, Mateo; Santos Gago, Juan M; Álvarez Sabucedo, Luis M; Wanden-Berghe, Carmina; Sanz-Valero, Javier

2018-01-01

To review the scientific literature related to the safe handling of hazardous drugs (HDs). Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion.

Safe handling of antineoplastic drugs.

PubMed

Harrison, B R

1994-07-01

Managers should be aware of the hazardous properties of antineoplastic drugs and of the procedures and equipment commonly recommended to provide a safe working environment for employees, patients, and visitors. Compliance with the many published guidelines should help ensure passage of the inevitable Occupational Safety and Health Administration (OSHA) or Joint Commission inspection. Acute and chronic toxicities of the antineoplastic drugs, the potential for exposure in the workplace, and the basic guidelines for safe handling of these agents are reviewed.

29 CFR 1917.16 - Line handling. (See also § 1917.95(b)).

Code of Federal Regulations, 2011 CFR

2011-07-01

... also § 1917.95(b)). (a) In order to provide safe access for handling lines while mooring and unmooring... be used. (b) When stringpiece or apron width is insufficient for safe footing, grab lines or rails... the water edge of a berth and a shed or other structure.) ...

29 CFR 1917.16 - Line handling. (See also § 1917.95(b)).

Code of Federal Regulations, 2010 CFR

2010-07-01

... also § 1917.95(b)). (a) In order to provide safe access for handling lines while mooring and unmooring... be used. (b) When stringpiece or apron width is insufficient for safe footing, grab lines or rails... the water edge of a berth and a shed or other structure.) ...

78 FR 15709 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... shark and swordfish limited-access permit applicants who intend to fish with longline or gillnet gear... limited-access swordfish or shark permit and that use longline or gillnet gear may not fish unless both... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

76 FR 11762 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

... receipt of fish as they are offloaded from a vessel; and who fills out dealer reports. Atlantic shark... swordfish or shark permit and that use longline or gillnet gear may not fish unless both the vessel owner... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

78 FR 54456 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

... workshop to fish with, or renew, their swordfish and shark limited-access permits. Additionally, new shark... limited-access swordfish or shark permit and that use longline or gillnet gear may not fish unless both... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

77 FR 55464 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... Workshops Since January 1, 2007, shark limited-access and swordfish limited- access permit holders who fish... shark permit and that use longline or gillnet gear may not fish unless both the vessel owner and... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

75 FR 53665 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... shark permit and that use longline or gillnet gear may not fish unless both the vessel owner and... course, and obtain a new certificate in order to fish with or renew their limited-access shark and... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification...

77 FR 12574 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... workshop to fish with, or renew, their swordfish and shark limited-access permits. Additionally, new shark...-access swordfish or shark permit and that use longline or gillnet gear may not fish unless both the... for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and...

75 FR 10217 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-05

... first receipt of fish as they are offloaded from a vessel; and fills out dealer reports. Atlantic shark... certificate in order to fish with or renew their limited-access shark and limited-access swordfish permits... Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification...

Food safety self-reported behaviors and cognitions of young adults: results of a national study.

PubMed

Byrd-Bredbenner, Carol; Maurer, Jaclyn; Wheatley, Virginia; Schaffner, Donald; Bruhn, Christine; Blalock, Lydia

2007-08-01

With limited opportunities to learn safe food handling via observation, many young adults lack the knowledge needed to keep them safe from foodborne disease. It is important to reach young adults with food safety education because of their current and future roles as caregivers. With a nationwide online survey, the demographic characteristics, self-reported food handling and consumption behaviors, food safety beliefs, locus of control, self-efficacy, stage of change, and knowledge of young adults with education beyond high school (n = 4,343) were assessed. Young adults (mean age, 19.92 +/- 1.67 SD) who participated were mainly female, white, never married, and freshmen or sophomores. Participants correctly answered 60% of the knowledge questions and were most knowledgeable about groups at greatest risk for foodborne disease and least knowledgeable about common food sources of foodborne disease pathogens. They reported less than optimal levels of safe food handling practices. Young adults generally had a limited intake of foods that increase the risk of foodborne disease, positive food safety beliefs, an internal food safety locus of control, and confidence in their ability to handle food safely, and they were contemplating an improvement in, or preparing to improve, their food handling practices. Females significantly outperformed males on nearly all study measures. Future food safety educational efforts should focus on increasing knowledge and propelling young adults into the action stage of safe food handling, especially males. Efforts to improve knowledge and, ultimately, food safety behaviors are essential to safeguard the health of these young adults and enable them to fulfill the role of protecting the health of their future families.

21 CFR 179.45 - Packaging materials for use during the irradiation of prepackaged foods.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Packaging materials for use during the irradiation... OF HEALTH AND HUMAN SERVICES (CONTINUED) IRRADIATION IN THE PRODUCTION, PROCESSING AND HANDLING OF... irradiation of prepackaged foods. The packaging materials identified in this section may be safely subjected...

Unique Chernobyl Cranes for Deconstruction Activities in the New Safe Confinement - 13542

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parameswaran, N.A. Vijay; Chornyy, Igor; Owen, Rob

2013-07-01

The devastation left behind from the Chernobyl nuclear power plant (ChNPP) Unit 4 accident which occurred on April 26, 1986 presented unparalleled technical challenges to the world engineering and scientific community. One of the largest tasks that are in progress is the design and construction of the New Safe Confinement (NSC). The NSC is an engineered enclosure for the entire object shelter (OS) that includes a suite of process equipment. The process equipment will be used for the dismantling of the destroyed Chernobyl Nuclear Power Plant (ChNPP) Unit. One of the major mechanical handling systems to be installed in themore » NSC is the Main Cranes System (MCS). The planned decontamination and decommissioning or dismantling (D and D) activities will require the handling of heavily shielded waste disposal casks containing nuclear fuel as well as lifting and transporting extremely large structural elements. These activities, to be performed within the NSC, will require large and sophisticated cranes. The article will focus on the unique design features of the MCS for the D and D activities. (authors)« less

Supercritical fluids as alternative, safe, food-processing media: an overview.

PubMed

Da Cruz Francisco, José; Szwajcer Dey, Estera

2003-01-01

The continuous growth of world population and its concentration in the urban areas require food supplies that are continuous, sufficient and of good quality. To resolve this problem techniques have been developed for increasing food quantity and quality. The techniques are applied throughout the food chain from production, conservation and during distribution to the consumers (from "the field to the fork"). During handling of food, chemicals are often deliberately added to achieve improved processing and better quality. This is one of the main reasons food undergoes different kinds of contamination. This overview focuses on the application of supercritical fluids as media for handling food materials during processing with the perspective of reducing chemical contamination of food. Examples of developmental applications of this technique and on research work in process are presented. Emphasis is given to extraction and biotransformation techniques.

Safe procedure development to manage hazardous drugs in the workplace.

PubMed

Gaspar Carreño, Marisa; Achau Muñoz, Rubén; Torrico Martín, Fátima; Agún Gonzalez, Juan José; Sanchez Santos, Jose Cristobal; Cercos Lletí, Ana Cristina; Ramos Orozco, Pedro

2017-03-01

To develop a safety working procedure for the employees in the Intermutual Hospital de Levante (HIL) in those areas of activity that deal with the handling of hazardous drugs (MP). The procedure was developed in six phases: 1) hazard definition; 2) definition and identification of processes and development of general correct work practices about hazardous drugs' selection and special handling; 3) detection, selection and set of specific recommendations to handle with hazardous drugs during the processes of preparation and administration included in the hospital GFT; 4) categorization of risk during the preparation/administration and development of an identification system; 5) information and training of professionals; 6) implementation of the identification measures and prevention guidelines. Six processes were detected handling HD. During those processes, thirty HD were identified included in the hospital GFT and a safer alternative was found for 6 of them. The HD were classified into 4 risk categories based on those measures to be taken during the preparation and administration of each of them. The development and implementation of specific safety-work processes dealing with medication handling, allows hospital managers to accomplish effectively with their legal obligations about the area of prevention and provides healthcare professional staff with the adequate techniques and safety equipment to avoid possible dangers and risks of some drugs. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Safe medication management in specialized home healthcare - an observational study.

PubMed

Lindblad, Marléne; Flink, Maria; Ekstedt, Mirjam

2017-08-24

Medication management is a complex, error-prone process. The aim of this study was to explore what constitutes the complexity of the medication management process (MMP) in specialized home healthcare and how healthcare professionals handle this complexity. The study is theoretically based in resilience engineering. Data were collected during the MMP at three specialized home healthcare units in Sweden using two strategies: observation of workplaces and shadowing RNs in everyday work, including interviews. Transcribed material was analysed using grounded theory. The MMP in home healthcare was dynamic and complex with unclear boundaries of responsibilities, inadequate information systems and fluctuating work conditions. Healthcare professionals adapted their everyday clinical work by sharing responsibility and simultaneously being authoritative and preserving patients' active participation, autonomy and integrity. To promote a safe MMP, healthcare professionals constantly re-prioritized goals, handled gaps in communication and information transmission at a distance by creating new bridging solutions. Trade-offs and workarounds were necessary elements, but also posed a threat to patient safety, as these interim solutions were not systematically evaluated or devised learning strategies. To manage a safe medication process in home healthcare, healthcare professionals need to adapt to fluctuating conditions and create bridging strategies through multiple parallel activities distributed over time, space and actors. The healthcare professionals' strategies could be integrated in continuous learning, while preserving boundaries of safety, instead of being more or less interim solutions. Patients' and family caregivers' as active partners in the MMP may be an underestimated resource for a resilient home healthcare.

Experience with fluorine and its safe use as a propellant

NASA Technical Reports Server (NTRS)

Bond, D. L.; Guenther, M. E.; Stimpson, L. D.; Toth, L. R.; Young, D. L.

1979-01-01

The industrial and the propulsion experience with fluorine and its derivatives is surveyed. The hazardous qualities of fluorine and safe handling procedures for the substance are emphasized. Procedures which fulfill the safety requirements during ground operations for handling fluorinated propulsion systems are discussed. Procedures to be implemented for use onboard the Space Transportation System are included.

Assessing and Addressing Safe Food Handling Knowledge, Attitudes, and Behaviors of College Undergraduates

ERIC Educational Resources Information Center

Stein, Susan E.; Dirks, Brian P.; Quinlan, Jennifer J.

2010-01-01

The authors determined the food safety knowledge, attitudes, and behaviors of undergraduates (n = 1122) on an urban college campus using a previously piloted survey tool. Data obtained found that while students reported high levels of confidence in their ability to engage in safe food handling practices, their knowledge and self-reported behaviors…

Implementing AORN recommended practices for medication safety.

PubMed

Hicks, Rodney W; Wanzer, Linda J; Denholm, Bonnie

2012-12-01

Medication errors in the perioperative setting can result in patient morbidity and mortality. The AORN "Recommended practices for medication safety" provide guidance to perioperative nurses in developing, implementing, and evaluating safe medication use practices. These practices include recognizing risk points in the medication use process, collaborating with pharmacy staff members, conducting preoperative assessments and postoperative evaluations (eg, medication reconciliation), and handling hazardous medications and pharmaceutical waste. Strategies for successful implementation of the recommended practices include promoting a basic understanding of the nurse's role in the medication use process and developing a medication management plan as well as policies and procedures that support medication safety and activities to measure compliance with safe practices. Published by Elsevier Inc.

Hygienic food handling behaviours. An application of the Theory of Planned Behaviour.

PubMed

Mullan, Barbara A; Wong, Cara L

2009-06-01

It is estimated that 5.4 million Australians get sick annually from eating contaminated food and that up to 20% of this illness results from food handling behaviour. A study was undertaken to investigate the efficacy of the Theory of Planned Behaviour (TPB) including past behaviour in predicting safe food handling intention and behaviour. One hundred and nine participants completed questionnaires regarding their attitudes, perceived behavioural control (PBC), subjective norm, intentions and past behaviour. Behaviour was measured 4 weeks later. The TPB predicted a high proportion of variance in both intentions and behaviour, and past behaviour/habit was found to be the strongest predictor of behaviour. The results of the present study suggest interventions aimed at increasing safe food handling intentions should focus on the impact of normative influences and perceptions of control over their food handling environment; whereas interventions to change actual behaviour should attempt to increase hygienic food handling as a habitual behaviour.

Materials Handling. Module SH-01. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Examining the predictive utility of an extended theory of planned behaviour model in the context of specific individual safe food-handling.

PubMed

Mullan, Barbara; Allom, Vanessa; Sainsbury, Kirby; Monds, Lauren A

2015-07-01

In order to minimise the occurrence of food-borne illness, it is recommended that individuals perform safe food-handling behaviours, such as cooking food properly, cleaning hands and surfaces before preparing food, keeping food at the correct temperature, and avoiding unsafe foods. Previous research examining the determinants of safe food-handling behaviour has produced mixed results; however, this may be due to the fact that this research examined these behaviours as a totality, rather than considering the determinants of each behaviour separately. As such, the objective for the present study was to examine the predictors of the four aforementioned safe food-handling behaviours by applying an extended theory of planned behaviour to the prediction of each distinct behaviour. Participants were 170 students who completed theory of planned behaviour measures, with the addition of moral norm and habit strength at time 1, and behaviour measures one week later. While the influence of injunctive and descriptive norm and perceived behavioural control differed between behaviours, it appeared that moral norm was an important predictor of intention to engage in each of the four behaviours. Similarly, habit strength was an important predictor of each of the behaviours and moderated the relationship between intention and behaviour for the behaviour of avoiding unsafe food. The implication of these findings is that examining safe food-handling behaviours separately, rather than as a totality, may result in meaningful distinctions between the predictors of these behaviours. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safe Handling and Use of Flammable and Combustible Materials. Module SH-30. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safe handling and use of flammable and combustible materials is one of 50 modules concerned with job safety and health. This module introduces the student to the hazards of flammable and combustible materials and the measures necessary to control those hazards. Following the introduction, 14 objectives (each keyed to a page…

Challenges of safe medication practice in paediatric care--a nursing perspective.

PubMed

Star, Kristina; Nordin, Karin; Pöder, Ulrika; Edwards, I Ralph

2013-05-01

To explore nurses' experiences of handling medications in paediatric clinical practice, with a focus on factors that hinder and facilitate safe medication practices. Twenty nurses (registered nurses) from four paediatric wards at two hospitals in Sweden were interviewed in focus groups. The interviews were analysed using content analysis. Six themes emerged from the analysed interviews: the complexity specific for nurses working on paediatric wards is a hindrance to safe medication practices; nurses' concerns about medication errors cause a considerable psychological burden; the individual nurse works hard for safe medication practices and values support from other nurse colleagues; circumstances out of the ordinary are perceived as critical challenges for maintaining patient safety; nurses value clear instructions, guidelines and routines, but these are often missing, variable or changeable; management, other medical professionals, the pharmacy, the pharmaceutical industry and informatics support need to respond to the requirements of the nurses' working situations to improve safe medication practices. Weaknesses were apparent in the long chain of the medication-delivery process. A joint effort by different professions involved in that delivery process, and a nationwide collaboration between hospitals is recommended to increase safe medication practices in paediatric care. ©2013 Foundation Acta Paediatrica. Published by Blackwell Publishing Ltd.

An exploration of undergraduate nursing and physiotherapy students' views regarding education for patient handling.

PubMed

Kneafsey, Rosie; Ramsay, Jill; Edwards, Helen; Callaghan, Helen

2012-12-01

To ascertain the views of undergraduate student nurses and physiotherapists regarding their education in patient handling. Musculo-skeletal injuries are an important cause of staff sickness absence and attrition from the nursing profession and are a recognised problem within the physiotherapy profession. Nurses and physiotherapists are at risk of musculo-skeletal injuries as a result of their role in assisting patients with movement. A questionnaire survey was undertaken of undergraduate nursing and physiotherapy students (n = 371) at one university. Most students agreed that university teaching about moving and handling prepared them for clinical practice (64%). Over a third reported that they had never undertaken a written moving and handling risk assessment in clinical practice (38%). Almost half of the sample (40%) admitted undertaking unsafe moving and handling activities. Half (50%) also stated that they would rather 'fit' into the team than challenge unsafe practice. Almost a third (29%) stated that they had begun to experience pain since becoming a student. There were significant differences between nursing and physiotherapy students. Physiotherapy students were more likely to report being supervised when moving and handling and reported being more assertive about adhering to safe practice. The well-being of both nursing and physiotherapy undergraduate students is threatened when students undertake work placements in clinical settings. University-based education in safe patient handling, though important, can be undermined by workplace settings where unsafe practices occur. Collaboration is needed between university educators, managers and practice-based mentors to support students to maintain safe approaches to moving and handling patients. A third of students reported developing pain since becoming a healthcare student. Students entering their professions already injured may leave the workforce owing to poor physical well-being. It is vital that the clinical workplace supports safe systems of working. © 2012 Blackwell Publishing Ltd.

Food safety knowledge, attitudes and self-reported practices among Ontario high school students.

PubMed

Majowicz, Shannon E; Diplock, Kenneth J; Leatherdale, Scott T; Bredin, Chad T; Rebellato, Steven; Hammond, David; Jones-Bitton, Andria; Dubin, Joel A

2016-03-16

To measure the food safety knowledge, attitudes and self-reported practices of high school students in Ontario. We administered a school-wide paper survey to the student body (n = 2,860) of four Ontario high schools. We developed the survey by selecting questions from existing, validated questionnaires, prioritizing questions that aligned with the Canadian Partnership for Consumer Food Safety Education's educational messages and the food safety objectives from the 2013 Ontario High School Curriculum. One in five students reported currently handling food in commercial or public-serving venues; of these, 45.1% had ever taken a course that taught them how to prepare food (e.g., food and nutrition classes, food handler certification). Food safety knowledge among respondents was low. For example, 17.3% knew that the best way to determine whether hamburgers were cooked enough to eat was to measure the temperature with a food thermometer. Despite low knowledge, most respondents (72.7%) reported being confident that they could cook safe, healthy meals for themselves and their families. Safe food handling practices were frequently self-reported. Most students (86.5%) agreed that being able to cook safe, healthy meals was an important life skill, although their interest in learning about safe food handling and concern about foodborne disease were less pronounced. Our findings suggest that food safety knowledge is low, yet confidence in preparing safe, healthy meals is high, among high school students. Because work and volunteer opportunities put students in contact with both the public and food, this group is important to target for increased education about safe food handling.

American Nurses Association position statement on elimination of manual patient handling to prevent work-related musculoskeletal disorders.

PubMed

In order to establish a safe environment for nurses and patients, the American Nurses Association (ANA) supports actions and policies that result in the elimination of manual patient handling. Patient handling, such as lifting, repositioning, and transferring, has conventionally been performed by nurses. The performance of these tasks exposes nurses to increased risk for work-related musculoskeletal disorders. With the development of assistive equipment, such as lift and transfer devices, the risk of musculoskeletal injury can be significantly reduced. Effective use of assistive equipment and devices for patient handling creates a safe healthcare environment by separating the physical burden from the nurse and ensuring the safety, comfort, and dignity of the patient.

Lifting and exertion injuries decrease after implementation of an integrated hospital-wide safe patient handling and mobilisation programme.

PubMed

Dennerlein, Jack T; O'Day, Elizabeth Tucker; Mulloy, Deborah F; Somerville, Jackie; Stoddard, Anne M; Kenwood, Christopher; Teeple, Erin; Boden, Leslie I; Sorensen, Glorian; Hashimoto, Dean

2017-05-01

With increasing emphasis on early and frequent mobilisation of patients in acute care, safe patient handling and mobilisation practices need to be integrated into these quality initiatives. We completed a programme evaluation of a safe patient handling and mobilisation programme within the context of a hospital-wide patient care improvement initiative that utilised a systems approach and integrated safe patient equipment and practices into patient care plans. Baseline and 12-month follow-up surveys of 1832 direct patient care workers assessed work practices and self-reported pain while an integrated employee payroll and injury database provided recordable injury rates collected concurrently at 2 hospitals: the study hospital with the programme and a comparison hospital. Safe and unsafe patient handling practice scales at the study hospital improved significantly (p<0.0001 and p=0.0031, respectively), with no differences observed at the comparison hospital. We observed significant decreases in recordable neck and shoulder (Relative Risk (RR)=0.68, 95% CI 0.46 to 1.00), lifting and exertion (RR=0.73, 95% CI 0.60 to 0.89) and pain and inflammation (RR=0.78, 95% CI 0.62 to 1.00) injury rates at the study hospital. Changes in rates at the comparison hospital were not statistically significant. Within the context of a patient mobilisation initiative, a safe patient handling and mobilisation programme was associated with improved work practices and a reduction in recordable worker injuries. This study demonstrates the potential impact of utilising a systems approach based on recommended best practices, including integration of these practices into the patient's plan for care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Factors influencing oncology nurses' use of hazardous drug safe-handling precautions.

PubMed

Polovich, Martha; Clark, Patricia C

2012-05-01

To examine relationships among factors affecting nurses' use of hazardous drug (HD) safe-handling precautions, identify factors that promote or interfere with HD precaution use, and determine managers' perspectives on the use of HD safe-handling precautions. Cross-sectional, mixed methods; mailed survey to nurses who handle chemotherapy and telephone interviews with managers. Mailed invitation to oncology centers across the United States. 165 nurses who reported handling chemotherapy and 20 managers of nurses handling chemotherapy. Instruments measured the use of HD precautions and individual and organizational factors believed to influence precaution use. Data analysis included descriptive statistics and hierarchical regression. Manager interview data were analyzed using content analysis. Chemotherapy exposure knowledge, self-efficacy, perceived barriers, perceived risk, interpersonal influences, and workplace safety climate. Nurses were well educated, experienced, and certified in oncology nursing. The majority worked in outpatient settings and administered chemotherapy to an average of 6.8 patients per day. Exposure knowledge, self-efficacy for using personal protective equipment, and perceived risk of harm from HD exposure were high; total precaution use was low. Nurse characteristics did not predict HD precaution use. Fewer barriers, better workplace safety climate, and fewer patients per day were independent predictors of higher HD precaution use. HD handling policies were present, but many did not reflect current recommendations. Few managers formally monitored nurses' HD precaution use. Circumstances in the workplace interfere with nurses' use of HD precautions. Interventions should include fostering a positive workplace safety climate, reducing barriers, and providing appropriate nurse-patient ratios.

Pd-catalyzed intramolecular oxidative C-H amination: synthesis of carbazoles.

PubMed

Youn, So Won; Bihn, Joon Hyung; Kim, Byung Seok

2011-07-15

A Pd-catalyzed oxidative C-H amination of N-Ts-2-arylanilines under ambient temperature using Oxone as an inexpensive, safe, and easy-to-handle oxidant has been developed. This process represents a green and practical method for the facile construction of carbazoles with a broad substrate scope and wide functional group tolerance. © 2011 American Chemical Society

Occupational health and safety aspects of animal handling in dairy production.

PubMed

Lindahl, Cecilia; Lundqvist, Peter; Hagevoort, G Robert; Lunner Kolstrup, Christina; Douphrate, David I; Pinzke, Stefan; Grandin, Temple

2013-01-01

Livestock handling in dairy production is associated with a number of health and safety issues. A large number of fatal and nonfatal injuries still occur when handling livestock. The many animal handling tasks on a dairy farm include moving cattle between different locations, vaccination, administration of medication, hoof care, artificial insemination, ear tagging, milking, and loading onto trucks. There are particular problems with bulls, which continue to cause considerable numbers of injuries and fatalities in dairy production. In order to reduce the number of injuries during animal handling on dairy farms, it is important to understand the key factors in human-animal interactions. These include handler attitudes and behavior, animal behavior, and fear in cows. Care when in close proximity to the animal is the key for safe handling, including knowledge of the flight zone, and use of the right types of tools and suitable restraint equipment. Thus, in order to create safe working conditions during livestock handling, it is important to provide handlers with adequate training and to establish sound safety management procedures on the farm.

A multi-component patient-handling intervention improves attitudes and behaviors for safe patient handling and reduces aggression experienced by nursing staff: A controlled before-after study.

PubMed

Risør, Bettina Wulff; Casper, Sven Dalgas; Andersen, Lars Louis; Sørensen, Jan

2017-04-01

This study evaluated an intervention for patient-handling equipment aimed to improve nursing staffs' use of patient handling equipment and improve their general health, reduce musculoskeletal problems, aggressive episodes, days of absence and work-related accidents. As a controlled before-after study, questionnaire data were collected at baseline and 12-month follow-up among nursing staff at intervention and control wards at two hospitals. At 12-month follow-up, the intervention group had more positive attitudes towards patient-handling equipment and increased use of specific patient-handling equipment. In addition, a lower proportion of nursing staff in the intervention group had experienced physically aggressive episodes. No significant change was observed in general health status, musculoskeletal problems, days of absence or work-related accidents. The intervention resulted in more positive attitudes and behaviours for safe patient-handling and less physically aggressive episodes. However, this did not translate into improved health of the staff during the 12-month study period. Copyright © 2016 Elsevier Ltd. All rights reserved.

Examining the Factor Structure and Reliability of the Safe Patient Handling Perception Scale: An Initial Validation Study.

PubMed

White-Heisel, Regina; Canfield, James P; Young-Hughes, Sadie

Perceiving imminent safe patient handling and movement (SPH&M) dangers may reduce musculoskeletal (MSK) injuries for nurses in the workplace. The purpose of this study is to develop and validate the 17-item Safe Patient Handling Perception Scale (SPHPS) as an evaluation instrument assessing perceptual risk of MSK injury based on SPH&M knowledge, practice, and resource accessibility in the workplace. Data were collected from a convenience sample (N = 117) of nursing employees at a Veteran Affairs Medical Center. Factor analysis identified three factors: knowledge, practice, and accessibility. The SPHPS demonstrated high levels of reliability, supported by acceptable alpha scores (SPHM knowledge [α = .866], SPHM practices [α = .901], and access to SPHM resources [α = .855]), in addition to the relatively low standard error of measurement scores (SEM). The study outcomes suggest that the SPHPS is a valid and reliable tool that can measure participants' perceived risk factors for MSK injuries.

Metam Sodium and Metam Potassium Fumigant Safe Handling Guide

EPA Pesticide Factsheets

Safety training is required for certified pesticide applicators and handlers to handle soil fumigants. Measures to mitigate exposure include personal protective equipment, air monitoring, respiratory protection, and emergency preparedness.

Irradiation in the production, processing, and handling of food. Final rule.

PubMed

2005-08-16

The Food and Drug Administration (FDA) is amending the food additive regulations to provide for the safe use of ionizing radiation for control of Vibrio species and other foodborne pathogens in fresh or frozen molluscan shellfish (e.g., oysters, mussels, clams, etc.). This action is in response to a petition filed by the National Fisheries Institute and the Louisiana Department of Agriculture and Forestry.

Gender difference in safe and unsafe practice of pesticide handling in tobacco farmers of malaysia.

PubMed

Bin Nordin, R; Araki, S; Sato, H; Yokoyama, K; Bin Wan Muda, W A; Win Kyi, D

2001-01-01

To identify gender difference in safe and unsafe practice of pesticide handling in tobacco farmers of Malaysia, we conducted a 20-item questionnaire interview on storage of pesticide (4 questions), mixing of pesticide (3 questions), use of personal protective equipment and clothing while spraying pesticide (7 questions), activities during and after spraying of pesticide (5 questions), and maintenance of pesticide sprayer (1 question) in 496 tobacco farmers (395 males and 101 females) in Bachok District, Kelantan, Malaysia. Duration of employment was significantly longer in females than those in males (p<0.001). In addition, proportion with no formal education in females was significantly higher than those in males (p<0.05). The following eight common factors were extracted from the 20 questionnaires by principal components factor analysis after varimax rotation in all farmers: (1) use of personal protective equipment, (2) unsafe work habit, (3) reading and following instructions on pesticide label, (4) security, storage and disposal of pesticide container, (5) safe work habit, (6) proper handling of pesticide and maintenance of pesticide sprayer, (7) use of personal protective clothing, and (8) safe handling of pesticide. Results of analysis of covariance for the eight factor scores of all male and female farmers, controlling for educational level and duration of employment, showed that: (1) factor scores for use of personal protective equipment (p<0.001), use of personal protective clothing (p<0.001) and safe work habit (p<0.001) in females were significantly lower than those in males; (2) conversely, factor scores for reading and following instruction on pesticide label (p<0.001) and proper handling of pesticide and maintenance of pesticide sprayer (p<0.01) in males were significantly lower than those in females; and (3) there were no significant differences in other three factor scores (p>0.05). We therefore conclude that: (1) for female tobacco farmers, choice of personal attire tend to result in lower scores on use of personal protective equipment and personal protective clothing while personal hygiene practices result in lower score on safe work habit; and, (2) for male tobacco farmers, the lower scores on reading and following instruction on pesticide label and mixing pesticide and maintenance of pesticide sprayer in good condition suggests that they were not primarily involved in these activities. It is postulated that these differences in safe and unsafe practices of pesticide handling across gender is related to the choice of personal attire, personal hygiene practices and division of labour within farming households which in turn is influenced by prevailing sociocultural norms in the community.

KSC-00pp1584

NASA Image and Video Library

2000-10-18

During Super Safety and Health Day at KSC, workers from Florida Power and Light (at left) demonstrate to an interested group of KSC employees how they safely handle high power lines. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is “Safety and Health First.” KSC’s number one goal is to “Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.

KSC00pp1584

NASA Image and Video Library

2000-10-18

During Super Safety and Health Day at KSC, workers from Florida Power and Light (at left) demonstrate to an interested group of KSC employees how they safely handle high power lines. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is “Safety and Health First.” KSC’s number one goal is to “Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.

Safe Hazmat Storage Tips.

ERIC Educational Resources Information Center

Neville, Angela

1996-01-01

Provides a list of recommendations for safely managing hazardous waste containers. Encourages training of employees on the hazards of the wastes they handle and the correct procedures for managing containers. (DDR)

Dazomet Fumigant Safe Handling Guide

EPA Pesticide Factsheets

Dazomet is the active ingredient in Basamid G soil fumigant pesticide. Wear personal protective equipment such as respirators when handling Basamid granules or making an application, mitigate exposures, and recognize signs of vapor inhalation.

Varying influences of motivation factors on employees' likelihood to perform safe food handling practices because of demographic differences.

PubMed

Ellis, Jason D; Arendt, Susan W; Strohbehn, Catherine H; Meyer, Janell; Paez, Paola

2010-11-01

Food safety training has been the primary avenue for ensuring food workers are performing proper food handling practices and thus, serving safe food. Yet, knowledge of safe food handling practices does not necessarily result in actual performance of these practices. This research identified participating food service employees' level of agreement with four factors of motivation (internal motivations, communication, reward-punishment, and resources) and determined if respondents with different demographic characteristics reported different motivating factors. Data were collected from 311 food service employees who did not have any supervisory responsibilities. Intrinsic motivation agreement scores were consistently the highest of all four motivational factors evaluated and did not differ across any of the demographic characteristics considered. In contrast, motivation agreement scores for communication, reward-punishment, and resources did differ based on respondents' gender, age, place of employment, job status, food service experience, completion of food handler course, or possession of a food safety certification. In general, respondents agreed that these motivation factors influenced their likelihood to perform various safe food handling procedures. This research begins to illustrate how employees' demographic characteristics influence their responses to various motivators, helping to clarify the complex situation of ensuring safe food in retail establishments. Future research into why employee willingness to perform varies more for extrinsic motivation than for intrinsic motivation could assist food service managers in structuring employee development programs and the work environment, in a manner that aids in improving external motivation (communication, reward-punishment, and resources) and capitalizing on internal motivation.

Closed-system drug-transfer devices plus safe handling of hazardous drugs versus safe handling alone for reducing exposure to infusional hazardous drugs in healthcare staff.

PubMed

Gurusamy, Kurinchi Selvan; Best, Lawrence Mj; Tanguay, Cynthia; Lennan, Elaine; Korva, Mika; Bussières, Jean-François

2018-03-27

Occupational exposure to hazardous drugs can decrease fertility and result in miscarriages, stillbirths, and cancers in healthcare staff. Several recommended practices aim to reduce this exposure, including protective clothing, gloves, and biological safety cabinets ('safe handling'). There is significant uncertainty as to whether using closed-system drug-transfer devices (CSTD) in addition to safe handling decreases the contamination and risk of staff exposure to infusional hazardous drugs compared to safe handling alone. To assess the effects of closed-system drug-transfer of infusional hazardous drugs plus safe handling versus safe handling alone for reducing staff exposure to infusional hazardous drugs and risk of staff contamination. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, Embase, OSH-UPDATE, CINAHL, Science Citation Index Expanded, economic evaluation databases, the World Health Organization International Clinical Trials Registry Platform, and ClinicalTrials.gov to October 2017. We included comparative studies of any study design (irrespective of language, blinding, or publication status) that compared CSTD plus safe handling versus safe handling alone for infusional hazardous drugs. Two review authors independently identified trials and extracted data. We calculated the risk ratio (RR) and mean difference (MD) with 95% confidence intervals (CI) using both fixed-effect and random-effects models. We assessed risk of bias according to the risk of bias in non-randomised studies of interventions (ROBINS-I) tool, used an intracluster correlation coefficient of 0.10, and we assessed the quality of the evidence using GRADE. We included 23 observational cluster studies (358 hospitals) in this review. We did not find any randomised controlled trials or formal economic evaluations. In 21 studies, the people who used the intervention (CSTD plus safe handling) and control (safe handling alone) were pharmacists or pharmacy technicians; in the other two studies, the people who used the intervention and control were nurses, pharmacists, or pharmacy technicians. The CSTD used in the studies were PhaSeal (13 studies), Tevadaptor (1 study), SpikeSwan (1 study), PhaSeal and Tevadaptor (1 study), varied (5 studies), and not stated (2 studies). The studies' descriptions of the control groups were varied. Twenty-one studies provide data on one or more outcomes for this systematic review. All the studies are at serious risk of bias. The quality of evidence is very low for all the outcomes.There is no evidence of differences in the proportion of people with positive urine tests for exposure between the CSTD and control groups for cyclophosphamide alone (RR 0.83, 95% CI 0.46 to 1.52; I² = 12%; 2 studies; 2 hospitals; 20 participants; CSTD: 76.1% versus control: 91.7%); cyclophosphamide or ifosfamide (RR 0.09, 95% CI 0.00 to 2.79; 1 study; 1 hospital; 14 participants; CSTD: 6.4% versus control: 71.4%); and cyclophosphamide, ifosfamide, or gemcitabine (RR not estimable; 1 study; 1 hospital; 36 participants; 0% in both groups).There is no evidence of a difference in the proportion of surface samples contaminated in the pharmacy areas or patient-care areas for any of the drugs except 5-fluorouracil, which was lower in the CSTD group than in the control (RR 0.65, 95% CI 0.43 to 0.97; 3 studies, 106 hospitals, 1008 samples; CSTD: 9% versus control: 13.9%).The amount of cyclophosphamide was lower in pharmacy areas in the CSTD group than in the control group (MD -49.34 pg/cm², 95% CI -84.11 to -14.56, I² = 0%, 7 studies; 282 hospitals, 1793 surface samples). Additionally, one interrupted time-series study (3 hospitals; 342 samples) demonstrated a change in the slope between pre-CSTD and CSTD (3.9439 pg/cm², 95% CI 1.2303 to 6.6576; P = 0.010), but not between CSTD and post-CSTD withdrawal (-1.9331 pg/cm², 95% CI -5.1260 to 1.2598; P = 0.20). There is no evidence of difference in the amount of the other drugs between CSTD and control groups in the pharmacy areas or patient-care areas.None of the studies report on atmospheric contamination, blood tests, or other measures of exposure to infusional hazardous drugs such as urine mutagenicity, chromosomal aberrations, sister chromatid exchanges, or micronuclei induction.None of the studies report short-term health benefits such as reduction in skin rashes, medium-term reproductive health benefits such as fertility and parity, or long-term health benefits related to the development of any type of cancer or adverse events.Five studies (six hospitals) report the potential cost savings through the use of CSTD. The studies used different methods of calculating the costs, and the results were not reported in a format that could be pooled via meta-analysis. There is significant variability between the studies in terms of whether CSTD resulted in cost savings (the point estimates of the average potential cost savings ranged from (2017) USD -642,656 to (2017) USD 221,818). There is currently no evidence to support or refute the routine use of closed-system drug transfer devices in addition to safe handling of infusional hazardous drugs, as there is no evidence of differences in exposure or financial benefits between CSTD plus safe handling versus safe handling alone (very low-quality evidence). None of the studies report health benefits.Well-designed multicentre randomised controlled trials may be feasible depending upon the proportion of people with exposure. The next best study design is interrupted time-series. This design is likely to provide a better estimate than uncontrolled before-after studies or cross-sectional studies. Future studies may involve other alternate ways of reducing exposure in addition to safe handling as one intervention group in a multi-arm parallel design or factorial design trial. Future studies should have designs that decrease the risk of bias and enable measurement of direct health benefits in addition to exposure. Studies using exposure should be tested for a relevant selection of hazardous drugs used in the hospital to provide an estimate of the exposure and health benefits of using CSTD. Steps should be undertaken to ensure that there are no other differences between CSTD and control groups, so that one can obtain a reasonable estimate of the health benefits of using CSTD.

[Nursing workers' perceptions regarding the handling of hazardous chemical waste].

PubMed

Costa, Taiza Florêncio; Felli, Vanda Elisa Andres; Baptista, Patrícia Campos Pavan

2012-12-01

The objectives of this study were to identify the perceptions of nursing workers regarding the handling of hazardous chemical waste at the University of São Paulo University Hospital (HU-USP), and develop a proposal to improve safety measures. This study used a qualitative approach and a convenience sample consisting of eighteen nursing workers. Data collection was performed through focal groups. Thematic analysis revealed four categories that gave evidence of training deficiencies in terms of the stages of handling waste. Difficulties that emerged included a lack of knowledge regarding exposure and its impact, the utilization of personal protective equipment versus collective protection, and suggestions regarding measures to be taken by the institution and workers for the safe handling of hazardous chemical waste. The present data allowed for recommending proposals regarding the safe management of hazardous chemical waste by the nursing staff.

Uranium hexafluoride: Safe handling, processing, and transporting: Conference proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strunk, W.D.; Thornton, S.G.

This conference seeks to provide a forum for the exchange of information and ideas of the safety aspects and technical issue related to the handling of uranium hexafluoride. By allowing operators, engineers, scientists, managers, educators, and others to meet and share experiences of mutual concern, the conference is also intended to provide the participants with a more complete knowledge of technical and operational issues. The topics for the papers in the proceedings are widely varied and include the results of chemical, metallurgical, mechanical, thermal, and analytical investigations, as well as the developed philosophies of operational, managerial, and regulatory guidelines. Papersmore » have been entered individually into EDB and ERA. (LTN)« less

NPF MECHANICAL CELL NaK DISPOSAL AND FUME ABATEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rey, G.

Some of the fuels originally scheduled for processing in the nonproduction fuel (NPF) processing program incorporated sodium or sodium- potassium alloy (NaK) as the bonding material between stainless-steel cladding and the uranium or uranium-molybdenum alloy core. Because of the special hazards involved in handling NaK, studies were made to determine safe methods for processing NaK-containing fuels. An underwater NaK dispensing system was installed, and tests were made to determine the characteristics of the NaK-water reaction. The equipment consisted of a dispenser, reaction pan, and off-gas scrubber. After initinl studies, a prototype test was made wherein U-Mo canned slugs containing NaKmore » reservoirs were hack sawed underwater. The studies demonstrated that the NaK reservoirs can be safely deactivated by hack sawing under a submerged hood in a shallow water bath. (W.L.H.)« less

Handling small arbovirus vectors safely during biosafety level 3 containment: Culicoides variipennis sonorensis (Diptera:Ceratopogonidae) and exotic bluetongue viruses.

PubMed

Hunt, G J; Tabachnick, W J

1996-05-01

Equipment and procedures are described for biosafety level 3 (BL-3) containment work with small, zoophilic arthropods. BL-3 classified pathogens always must be manipulated in biological safety cabinets. Procedures, including physical barriers and handling methods, that prevent the escape of potentially virus-infected insects are discussed, and the use of a monitoring system for insect security is explained. The inability to recover escaped minute, flying insects poses a major difference from similar work with larger insects, such as mosquitoes. Methods were developed for the safe and secure handling of Culicoides variipennis sonorensis Wirth & Jones infected with exotic bluetongue viruses during BL-3 containment.

45 CFR 1310.17 - Driver and bus monitor training.

Code of Federal Regulations, 2010 CFR

2010-10-01

... safe and efficient manner; (2) safely run a fixed route, including loading and unloading children... first aid in case of injury; (4) handle emergency situations, including vehicle evacuation procedures...

Explaining Consumer Safe Food Handling Through Behavior-Change Theories: A Systematic Review.

PubMed

Young, Ian; Reimer, Danielle; Greig, Judy; Meldrum, Richard; Turgeon, Patricia; Waddell, Lisa

2017-11-01

Consumers often engage in unsafe food handling behaviors at home. Previous studies have investigated the ability of behavior-change theories to explain and predict these behaviors. The purpose of this review was to determine which theories are most consistently associated with consumers' safe food handling behaviors across the published literature. A standardized systematic review methodology was used, consisting of the following steps: comprehensive search strategy; relevance screening of identified references; confirmation of relevance and characterization of relevant articles; risk-of-bias assessment; data extraction; and descriptive analysis of study results. A total of 20 relevant studies were identified; they were mostly conducted in Australia (40%) and the United States (35%) and used a cross-sectional design (65%). Most studies targeted young adults (65%), and none focused on high-risk consumer groups. The outcomes of 70% of studies received high overall risk-of-bias ratings, largely due to a lack of control for confounding variables. The most commonly applied theory was the Theory of Planned Behavior (45% of studies), which, along with other investigated theories of behavior change, was frequently associated with consumer safe food handling behavioral intentions and behaviors. However, overall, there was wide variation in the specific constructs found to be significantly associated and in the percentage of variance explained in each outcome across studies. The results suggest that multiple theories of behavior change can help to explain consumer safe food handling behaviors and could be adopted to guide the development of future behavior-change interventions. In these contexts, theories should be appropriately selected and adapted to meet the needs of the specific target population and context of interest.

78 FR 34335 - Foreign-Trade Zone (FTZ) 141-Monroe County, New York; Notification of Proposed Production...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

... steel, fire and water resistant storage chests, gun safes, security safes, portable security safes, cash..., touchpads, plastic gun racks, keypad assemblies, panel lock assemblies, door backs, plastic trays, drawers..., wood gun shelf racks, cable assemblies, communication cables, gasket kits, door springs, metal handles...

Safe Handling of Radioactive Materials. Recommendations of the National Committee on Radiation Protection. Handbook 92.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

This handbook is designed to help users of radioactive materials to handle the radioactive material without exposing themselves or others to radiation doses in excess of maximum permissible limits. The discussion of radiation levels is in terms of readings from dosimeters and survey instruments. Safety in the handling of radioactive materials in…

Additives in plastics.

PubMed Central

Deanin, R D

1975-01-01

The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

Carbothermal Production of Magnesium: Csiro's Magsonic™ Process

NASA Astrophysics Data System (ADS)

Prentice, Leon H.; Nagle, Michael W.; Barton, Timothy R. D.; Tassios, Steven; Kuan, Benny T.; Witt, Peter J.; Constanti-Carey, Keri K.

Carbothermal production has been recognized as conceptually the simplest and cleanest route to magnesium metal, but has suffered from technical challenges of development and scale-up. Work by CSIRO has now successfully demonstrated the technology using supersonic quenching of magnesium vapor (the MagSonic™ Process). Key barriers to process development have been overcome: the experimental program has achieved sustained operation, no nozzle blockage, minimal reversion, and safe handling of pyrophoric powders. The laboratory equipment has been operated at industrially relevant magnesium vapor concentrations (>25% Mg) for multiple runs with no blockage. Novel computational fluid dynamics (CFD) modeling of the shock quenching and metal vapor condensation has informed nozzle design and is supported by experimental data. Reversion below 10% has been demonstrated, and magnesium successfully purified (>99.9%) from the collected powder. Safe operating procedures have been developed and demonstrated, minimizing the risk of powder explosion. The MagSonic™ Process is now ready to progress to significantly larger scale and continuous operation.

Seafood Safety and Quality: The Consumer’s Role

PubMed Central

Hicks, Doris T.

2016-01-01

All the good news about seafood—the health and nutritional benefits, the wide varieties and flavors—has had a positive effect on consumption: people are eating more seafood (http://www.seagrant.sunysb.edu/seafood/pdfs/SeafoodSavvy.pdf). Yet consumers want to be assured that seafood is as safe as, or safer to eat than, other foods. When you hear “seafood safety”, think of a safety net designed to protect you, the consumer, from food-borne illness. Every facet of the seafood industry, from harvester to consumer, plays a role in holding up the safety net. The role of state and federal agencies, fishermen, aquaculturists, retailers, processors, restaurants, and scientists is to provide, update, and carry out the necessary handling, processing, and inspection procedures to give consumers the safest seafood possible. The consumer’s responsibility is to follow through with proper handling techniques, from purchase to preparation. It doesn’t matter how many regulations and inspection procedures are set up; the final edge of the safety net is held by the consumer. This article will give you the information you need to educate yourself and be assured that the fish and shellfish you consume are safe. The most common food-borne illnesses are caused by a combination of bacteria naturally present in our environment and food handling errors made in commercial settings, food service institutions, or at home. PMID:28231165

Gender Difference in Safe and Unsafe Practice of Pesticide Handling in Tobacco Farmers of Malaysia

PubMed Central

BIN NORDIN, Rusli; ARAKI, Shunichi; SATO, Hajime; YOKOYAMA, Kazuhito; BIN WAN MUDA, Wan Abdul Manan; WIN KYI, Daw

2001-01-01

To identify gender difference in safe and unsafe practice of pesticide handling in tobacco farmers of Malaysia, we conducted a 20-item questionnaire interview on storage of pesticide (4 questions), mixing of pesticide (3 questions), use of personal protective equipment and clothing while spraying pesticide (7 questions), activities during and after spraying of pesticide (5 questions), and maintenance of pesticide sprayer (1 question) in 496 tobacco farmers (395 males and 101 females) in Bachok District, Kelantan, Malaysia. Duration of employment was significantly longer in females than those in males (p<0.001). In addition, proportion with no formal education in females was significantly higher than those in males (p<0.05). The following eight common factors were extracted from the 20 questionnaires by principal components factor analysis after varimax rotation in all farmers: (1) use of personal protective equipment, (2) unsafe work habit, (3) reading and following instructions on pesticide label, (4) security, storage and disposal of pesticide container, (5) safe work habit, (6) proper handling of pesticide and maintenance of pesticide sprayer, (7) use of personal protective clothing, and (8) safe handling of pesticide. Results of analysis of covariance for the eight factor scores of all male and female farmers, controlling for educational level and duration of employment, showed that: (1) factor scores for use of personal protective equipment (p<0.001), use of personal protective clothing (p<0.001) and safe work habit (p<0.001) in females were significantly lower than those in males; (2) conversely, factor scores for reading and following instruction on pesticide label (p<0.001) and proper handling of pesticide and maintenance of pesticide sprayer (p<0.01) in males were significantly lower than those in females; and (3) there were no significant differences in other three factor scores (p>0.05). We therefore conclude that: (1) for female tobacco farmers, choice of personal attire tend to result in lower scores on use of personal protective equipment and personal protective clothing while personal hygiene practices result in lower score on safe work habit; and, (2) for male tobacco farmers, the lower scores on reading and following instruction on pesticide label and mixing pesticide and maintenance of pesticide sprayer in good condition suggests that they were not primarily involved in these activities. It is postulated that these differences in safe and unsafe practices of pesticide handling across gender is related to the choice of personal attire, personal hygiene practices and division of labour within farming households which in turn is influenced by prevailing sociocultural norms in the community. PMID:22973149

Options and processes for spent catalyst handling and utilization.

PubMed

Marafi, M; Stanislaus, A

2003-07-18

The quantity of spent hydroprocessing catalysts discarded as solid wastes in the petroleum refining industries has increased remarkably in recent years due to a rapid growth in the hydroprocessing capacity to meet the rising demand for low-sulfur fuels. Due to their toxic nature, spent hydroprocessing catalysts have been branded as hazardous wastes, and the refiners are experiencing pressure from environmental authorities to handle them safely. Several alternative methods such as reclamation of metals, rejuvenation and reuse, disposal in landfills and preparation of useful materials using spent catalysts as raw materials are available to deal with the spent catalyst problem. The technical feasibility as well as the environmental and economic aspects of these options are reviewed. In addition, details of two bench-scale processes, one for rejuvenation of spent hydroprocessing catalysts, and the other for producing non-leachable synthetic aggregate materials that were developed in this laboratory, are presented in this paper.

Llama medicine. Physical examination, restraint and handling.

PubMed

Fowler, M

1989-03-01

Llamas are generally docile, easily handled domestic animals. Special chutes have been designed for safe, efficient restraint for examination and diagnostic procedures, most of which are commonly performed on other species. Anatomic differences make some of these procedures unique to the llama.

33 CFR 127.1315 - Preliminary transfer inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Hazardous Gas Operations § 127.1315 Preliminary... capacity of each storage tank to or from which LHG will be transferred, to ensure that it is safe for...

Research on the Use of Robotics in Hazardous Environments at Sandia National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwok, Kwan S.

Many hazardous material handling needs exist in remote unstructured environments. Currently these operations are accomplished using personnel in direct contact with the hazards. A safe and cost effective alternative to this approach is the use of intelligent robotic systems for safe handling, packaging, transport, and even excavation of hazardous materials. The Intelligent Systems and Robotics Center of Sandia National Laboratories has developed and deployed robotic technologies for use in hazardous environments, three of which have been deployed in DOE production facilities for handling of special nuclear materials. Other systems are currently under development for packaging special nuclear materials. This papermore » presents an overview of the research activities, including five delivered systems, at %ndia National Laboratories on the use of robotics in hazardous environments.« less

Evaluation of Selected Chemical Processes for Production of Low-cost Silicon, Phase 3. [using a fluidized bed reactor

NASA Technical Reports Server (NTRS)

Blocher, J. M., Jr.; Browning, M. F.

1979-01-01

The construction and operation of an experimental process system development unit (EPSDU) for the production of granular semiconductor grade silicon by the zinc vapor reduction of silicon tetrachloride in a fluidized bed of seed particles is presented. The construction of the process development unit (PDU) is reported. The PDU consists of four critical units of the EPSDU: the fluidized bed reactor, the reactor by product condenser, the zinc vaporizer, and the electrolytic cell. An experimental wetted wall condenser and its operation are described. Procedures are established for safe handling of SiCl4 leaks and spills from the EPSDU and PDU.

Prudent Practices for Handling Hazardous Chemicals in Laboratories.

ERIC Educational Resources Information Center

National Academy of Sciences-National Research Council, Washington, DC. Assembly of Mathematical and Physical Sciences.

This guide recommends procedures for safe handling and disposal of hazardous substances, along with broad recommendations for developing comprehensive laboratory safety programs. Although specific information is provided, general principles which can be adapted to activities in any laboratory are emphasized. Section 1 focuses on procedures for…

29 CFR 1919.75 - Determination of crane or derrick safe working loads and limitations in absence of manufacturer's...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Determination of crane or derrick safe working loads and limitations in absence of manufacturer's data. 1919.75 Section 1919.75 Labor Regulations Relating to Labor... Certification of Shore-Based Material Handling Devices § 1919.75 Determination of crane or derrick safe working...

29 CFR 1919.75 - Determination of crane or derrick safe working loads and limitations in absence of manufacturer's...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Determination of crane or derrick safe working loads and limitations in absence of manufacturer's data. 1919.75 Section 1919.75 Labor Regulations Relating to Labor... Certification of Shore-Based Material Handling Devices § 1919.75 Determination of crane or derrick safe working...

What Elements of the 2013 American Nurses Association Safe Patient Handling and Mobility Standards are Reflected in State Legislation?

PubMed Central

Powell-Cope, Gail; Rugs, Deborah

2015-01-01

Many professional organizations have endorsed and provided guidance on the implementation of safe patient handling and mobility (SPHM) programs. In 2013, the American Nurses Association published the interprofessional standards of SPHM. Eleven states have passed laws to implement statewide SPHM programs. This article describes the evaluation of the quality of SPHM legislation against the ANA standards. Information gleaned from this analysis could be used to strengthen existing legislation, craft new bills in the 39 states without SPHM legislation, and provide direction for national legislation. PMID:26413418

Guidelines for design and safe handling of curved I-shaped steel girders.

DOT National Transportation Integrated Search

2010-02-01

The purpose of this set of guidelines is to summarize recommendations from work : completed as part of the Texas Department of Transportation (TxDOT) Research Project 0-5574 : entitled "Curved Plate Girder Design for Safe and Economic Construction." ...

Human Milk Handling and Storage Practices Among Peer Milk-Sharing Mothers.

PubMed

Reyes-Foster, Beatriz M; Carter, Shannon K; Hinojosa, Melanie Sberna

2017-02-01

Peer milk sharing, the noncommercial sharing of human milk from one parent or caretaker directly to another for the purposes of feeding a child, appears to be an increasing infant-feeding practice. Although the U.S. Food and Drug Administration has issued a warning against the practice, little is known about how people who share human milk handle and store milk and whether these practices are consistent with clinical safety protocols. Research aim: This study aimed to learn about the milk-handling practices of expressed human milk by milk-sharing donors and recipient caretakers. In this article, we explore the degree to which donors and recipients adhere to the Academy of Breastfeeding Medicine clinical recommendations for safe handling and storage. Online surveys were collected from 321 parents engaged in peer milk sharing. Univariate descriptive statistics were used to describe the safe handling and storage procedures for milk donors and recipients. A two-sample t-test was used to compare safety items common to each group. Multivariate ordinary least squares regression analysis was used to examine sociodemographic correlates of milk safety practices within the sample group. Findings indicate that respondents engaged in peer milk sharing report predominantly positive safety practices. Multivariate analysis did not reveal any relationship between safety practices and sociodemographic characteristics. The number of safe practices did not differ between donors and recipients. Parents and caretakers who participate in peer human milk sharing report engaging in practices that should reduce risk of bacterial contamination of expressed peer shared milk. More research on this particular population is recommended.

Irradiation in the production, processing and handling of food. Final rule.

PubMed

2012-11-30

The Food and Drug Administration (FDA) is amending the food additive regulations to provide for the safe use of a 4.5 kilogray (kGy) maximum absorbed dose of ionizing radiation to treat unrefrigerated (as well as refrigerated) uncooked meat, meat byproducts, and certain meat food products to reduce levels of foodborne pathogens and extend shelf life. This action is in response to a petition filed by the U.S. Department of Agriculture, Food Safety and Inspection Service (USDA/FSIS).

Validation of Autoclave Protocols for Successful Decontamination of Category A Medical Waste Generated from Care of Patients with Serious Communicable Diseases

PubMed Central

Reimers, Mallory; Ernst, Neysa; Bova, Gregory; Nowakowski, Elaine; Bukowski, James; Ellis, Brandon C.; Smith, Chris; Sauer, Lauren; Dionne, Kim; Carroll, Karen C.; Maragakis, Lisa L.; Parrish, Nicole M.

2016-01-01

ABSTRACT In response to the Ebola outbreak in 2014, many hospitals designated specific areas to care for patients with Ebola and other highly infectious diseases. The safe handling of category A infectious substances is a unique challenge in this environment. One solution is on-site waste treatment with a steam sterilizer or autoclave. The Johns Hopkins Hospital (JHH) installed two pass-through autoclaves in its biocontainment unit (BCU). The JHH BCU and The Johns Hopkins biosafety level 3 (BSL-3) clinical microbiology laboratory designed and validated waste-handling protocols with simulated patient trash to ensure adequate sterilization. The results of the validation process revealed that autoclave factory default settings are potentially ineffective for certain types of medical waste and highlighted the critical role of waste packaging in successful sterilization. The lessons learned from the JHH validation process can inform the design of waste management protocols to ensure effective treatment of highly infectious medical waste. PMID:27927920

Validation of Autoclave Protocols for Successful Decontamination of Category A Medical Waste Generated from Care of Patients with Serious Communicable Diseases.

PubMed

Garibaldi, Brian T; Reimers, Mallory; Ernst, Neysa; Bova, Gregory; Nowakowski, Elaine; Bukowski, James; Ellis, Brandon C; Smith, Chris; Sauer, Lauren; Dionne, Kim; Carroll, Karen C; Maragakis, Lisa L; Parrish, Nicole M

2017-02-01

In response to the Ebola outbreak in 2014, many hospitals designated specific areas to care for patients with Ebola and other highly infectious diseases. The safe handling of category A infectious substances is a unique challenge in this environment. One solution is on-site waste treatment with a steam sterilizer or autoclave. The Johns Hopkins Hospital (JHH) installed two pass-through autoclaves in its biocontainment unit (BCU). The JHH BCU and The Johns Hopkins biosafety level 3 (BSL-3) clinical microbiology laboratory designed and validated waste-handling protocols with simulated patient trash to ensure adequate sterilization. The results of the validation process revealed that autoclave factory default settings are potentially ineffective for certain types of medical waste and highlighted the critical role of waste packaging in successful sterilization. The lessons learned from the JHH validation process can inform the design of waste management protocols to ensure effective treatment of highly infectious medical waste. Copyright © 2017 American Society for Microbiology.

A physical workload index to evaluate a safe resident handling program for nursing home personnel.

PubMed

Kurowski, Alicia; Buchholz, Bryan; Punnett, Laura

2014-06-01

The aim of this study was to obtain a comprehensive analysis of the physical workload of clinical staff in long-term care facilities, before and after a safe resident handling program (SRHP). Ergonomic exposures of health care workers include manual handling of patients and many non-neutral postures. A comprehensive assessment requires the integration of loads from these varied exposures into a single metric. The Postures, Activities, Tools, and Handling observational protocol, customized for health care, was used for direct observations of ergonomic exposures in clinical jobs at 12 nursing homes before the SRHP and 3, 12, 24, and 36 months afterward. Average compressive forces on the spine were estimated for observed combinations of body postures and manual handling and then weighted by frequencies of observed time for the combination. These values were summed to obtain a biomechanical index for nursing assistants and nurses across observation periods. The physical workload index (PWI) was much higher for nursing assistants than for nurses and decreased more after 3 years (-24% versus -2.5%). Specifically during resident handling, the PWI for nursing assistants decreased by 41% of baseline value. Spinal loading was higher for nursing assistants than for nurses in long-term care centers. Both job groups experienced reductions in physical loading from the SRHP, especially the nursing assistants and especially while resident handling. The PWI facilitates a comprehensive investigation of physical loading from both manual handling and non-neutral postures. It can be used in any work setting to identify high-risk tasks and determine whether reductions in one exposure are offset by increases in another.

Addition of Electrostatic Forces to EDEM with Applications to Triboelectrically Charged Particles

NASA Technical Reports Server (NTRS)

Hogue, Michael D.; Calle, Carlos; Curry, David

2008-01-01

Tribocharging of particles is common in many processes including fine powder handling and mixing, printer toner transport and dust extraction. In a lunar environment with its high vacuum and lack of water, electrostatic forces are an important factor to consider when designing and operating equipment. Dust mitigation and management is critical to safe and predictable performance of people and equipment. The extreme nature of lunar conditions makes it difficult and costly to carryout experiments on earth which are necessary to better understand how particles gather and transfer charge between each other and with equipment surfaces. DEM (Discrete Element Modeling) provides an excellent virtual laboratory for studying tribocharging of particles as well as for design of devices for dust mitigation and for other purposes related to handling and processing of lunar regolith. Theoretical and experimental work has been performed pursuant to incorporating screened Coulombic electrostatic forces into EDEM Tm, a commercial DEM software package. The DEM software is used to model the trajectories of large numbers of particles for industrial particulate handling and processing applications and can be coupled with other solvers and numerical models to calculate particle interaction with surrounding media and force fields. In this paper we will present overview of the theoretical calculations and experimental data and their comparison to the results of the DEM simulations. We will also discuss current plans to revise the DEM software with advanced electrodynamic and mechanical algorithms.

Organizational safety culture/climate and worker compliance with hazardous drug guidelines: lessons from the blood-borne pathogen experience.

PubMed

McDiarmid, Melissa A; Condon, Marian

2005-07-01

The health risks posed to health care workers (HCW) handling antineoplastic and other hazardous drugs (HDs) are well established. However, despite nearly 20 years of professional practice standards, compliance with safe handling procedures is poor. We present documentation of undercompliance with recommended safety procedures for HDs. Then, we examine a similar problem, HCW compliance with blood-borne pathogen universal precautions (UP) and its partial solution tied to the strength of a facility's safety culture. Lessons learned here may be applicable to the HD issue. It is proposed that analyzing a facility's safety culture may enlarge our understanding of the barriers contributing to HD under-compliance and suggest strategies to improve it. The Safety Culture paradigm offers many targets for intervention to enhance and promote worker compliance with safe HD handling practices thus mitigating internal exposure.

Development of safe infrared gas lasers

NASA Astrophysics Data System (ADS)

Mainuddin; Singhal, Gaurav; Tyagi, R. K.; Maini, A. K.

2013-04-01

Infrared gas lasers find application in numerous civil and military areas. Such lasers are therefore being developed at different institutions around the world. However, the development of chemical infrared gas lasers such as chemical oxygen iodine lasers (COIL) involves the use of several hazardous chemicals. In order to exploit full potential of these lasers, one must take diligent care of the safety issues associated with the handling of these chemicals and the involved processes. The present paper discusses the safety aspects to be taken into account in the development of these infrared gas lasers including various detection sensors working in conjunction with a customized data acquisition system loaded with safety interlocks for safe operation. The developed safety schemes may also be implemented for CO2 gas dynamic laser (GDL) and hydrogen fluoride-deuterium fluoride (HF-DF) Laser.

Differences among nursing homes in outcomes of a safe resident handling program

PubMed Central

Kurotvski, Alicia; Gore, Rebecca; Buchholz, Bryan; Punnett, Laura

2018-01-01

A large nursing home corporation implemented a safe resident handling program (SRHP) in 2004–2007. We evaluated its efficacy over a 2-year period by examining differences among 5 centers in program outcomes and potential predictors of those differences. We observed nursing assistants (NAs), recording activities and body postures at 60-second intervals on personal digital assistants at baseline and at 3-month, 12-month, and 24-month follow-ups. The two outcomes computed were change in equipment use during resident handling and change in a physical workload index that estimated spinal loading due to body postures and handled loads. Potential explanatory factors were extracted from post-observation interviews, investigator surveys of the workforce, from administrative data, and employee satisfaction surveys. The facility with the most positive outcome measures was associated with many positive changes in explanatory factors and the facility with the fewest positive outcome measures experienced negative changes in the same factors. These findings suggest greater SRHP benefits where there was lower NA turnover and agency staffing; less time pressure; and better teamwork, staff communication, and supervisory support. PMID:22833329

A Review of Toxicity and Use and Handling Considerations for Guanidine, Guanidine Hydrochloride, and Urea.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ertell, Katherine GB

2006-03-27

This is a technical report prepared for Oregon Sustainable Energy, LLC, under Agreement 06-19 with PNNL's Office of Small Business Programs. The request was to perform a review of the toxicity and safe handling of guanidine. The request was later amended to add urea. This report summarizes the toxicity data available in the scientific literature and provides an interpretation of the results and recommendations for handling these compounds.

Hunter Education Instructors Manual.

ERIC Educational Resources Information Center

Alexander, Jack E.

The instructors manual for teaching ethics, conservation, and safe hunting to Alaskans provides a uniform course in hunter education for both young people and adults, regardless of previous hunting experience. Developed as part of a training program in hunter ethics and safe handling of hunting equipment, the hunter education course is designed to…

30 CFR 57.6311 - Handling of misfires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... prohibit entry, and the condition shall be reported immediately to mine management. (d) Misfires occurring during the shift shall be reported to mine management not later than the end of the shift. ... is disposed of in a safe manner. (c) When a misfire cannot be disposed of safely, each approach to...

30 CFR 57.6311 - Handling of misfires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... prohibit entry, and the condition shall be reported immediately to mine management. (d) Misfires occurring during the shift shall be reported to mine management not later than the end of the shift. ... is disposed of in a safe manner. (c) When a misfire cannot be disposed of safely, each approach to...

29 CFR 1918.87 - Ship's cargo elevators.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Ship's cargo elevators. 1918.87 Section 1918.87 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.87 Ship's cargo elevators. (a) Safe working load. The safe working loads of ship's cargo elevators shall be determined and followed...

29 CFR 1918.87 - Ship's cargo elevators.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Ship's cargo elevators. 1918.87 Section 1918.87 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.87 Ship's cargo elevators. (a) Safe working load. The safe working loads of ship's cargo elevators shall be determined and followed...

29 CFR 1918.87 - Ship's cargo elevators.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Ship's cargo elevators. 1918.87 Section 1918.87 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.87 Ship's cargo elevators. (a) Safe working load. The safe working loads of ship's cargo elevators shall be determined and followed...

29 CFR 1918.87 - Ship's cargo elevators.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Ship's cargo elevators. 1918.87 Section 1918.87 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.87 Ship's cargo elevators. (a) Safe working load. The safe working loads of ship's cargo elevators shall be determined and followed...

Method for fabricating beryllium-based multilayer structures

DOEpatents

Skulina, Kenneth M.; Bionta, Richard M.; Makowiecki, Daniel M.; Alford, Craig S.

2003-02-18

Beryllium-based multilayer structures and a process for fabricating beryllium-based multilayer mirrors, useful in the wavelength region greater than the beryllium K-edge (111 .ANG. or 11.1 nm). The process includes alternating sputter deposition of beryllium and a metal, typically from the fifth row of the periodic table, such as niobium (Nb), molybdenum (Mo), ruthenium (Ru), and rhodium (Rh). The process includes not only the method of sputtering the materials, but the industrial hygiene controls for safe handling of beryllium. The mirrors made in accordance with the process may be utilized in soft x-ray and extreme-ultraviolet projection lithography, which requires mirrors of high reflectivity (>60%) for x-rays in the range of 60-140 .ANG. (60-14.0 nm).

Clients' safe food-handling knowledge and risk behavior in a home-delivered meal program.

PubMed

Almanza, Barbara A; Namkung, Young; Ismail, Joseph A; Nelson, Douglas C

2007-05-01

To determine typical handling practices of home-delivered meals, and provide appropriate handling instructions to reduce the risk of foodborne illness by improving consumer handling of home-delivered meals. Once permission was given by the home-delivered meal site directors, clients were provided a voluntary survey and requested by the delivery drivers to complete the self-administered questionnaire. The completed questionnaire was collected by the driver the following day. Because of the special needs of the home-delivered meal populations, the questionnaire was made as easy and convenient to answer as possible. Two hundred fifty-eight male clients (31%) and 575 female clients (69%) whose mean age was 79 years participated in the study. The respondents' safe food-handling practices, food safety knowledge, and demographic information were assessed. Average time for delivery and consumption of meals were also measured. Descriptive statistics (frequency and chi(2) test) of the participants' handling of home-delivered meals, their general food safety knowledge, and demographic information were reported. Delivery time and consumption time were calculated for each subject. Five hundred thirty-six of 869 clients (63%) reported that they ate their meals as soon as they were delivered. Of those clients who did not eat their meals immediately, 234 (82%) stored the cold food in the refrigerator and 142 (58%) stored the hot food in the freezer. More than one-third of the clients (n=277, 35%) reported that they had leftovers and only 34 (15%) ate the leftovers within 2 hours. Significant differences among groups on the basis of a derived food safety knowledge score were observed in terms of whether or not they ate their meal immediately (P

Food safety knowledge, practices and beliefs of primary food preparers in families with young children. A mixed methods study.

PubMed

Meysenburg, Rebecca; Albrecht, Julie A; Litchfield, Ruth; Ritter-Gooder, Paula K

2014-02-01

Food preparers in families with young children are responsible for safe food preparation and handling to prevent foodborne illness. To explore the food safety perceptions, beliefs, and practices of primary food preparers in families with children 10 years of age and younger, a mixed methods convergent parallel design and constructs of the Health Belief Model were used. A random sampling of 72 primary food handlers (36.2±8.6 years of age, 88% female) within young families in urban and rural areas of two Midwestern states completed a knowledge survey and participated in ten focus groups. Quantitative data were analyzed using SPSS. Transcribed interviews were analyzed for codes and common themes. Forty-four percent scored less than the average knowledge score of 73%. Participants believe children are susceptible to foodborne illness but perceive its severity to be low with gastrointestinal discomfort as the primary outcome. Using safe food handling practices and avoiding inconveniences were benefits of preventing foodborne illness. Childcare duties, time and knowledge were barriers to practicing food safety. Confidence in preventing foodborne illness was high, especially when personal control over food handling is present. The low knowledge scores and reported practices revealed a false sense of confidence despite parental concern to protect their child from harm. Food safety messages that emphasize the susceptibility and severity of foodborne illness in children are needed to reach this audience for adoption of safe food handling practices. Published by Elsevier Ltd.

Biodiesel Handling and Use Guide (Fifth Edition)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alleman, Teresa L.; McCormick, Robert L.; Christensen, Earl D.

This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

Biodiesel Handling and Use Guide (Fifth Edition)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alleman, Teresa L.; McCormick, Robert L.; Christensen, Earl D.

2016-11-08

This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

29 CFR 1918.87 - Ship's cargo elevators.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Ship's cargo elevators. 1918.87 Section 1918.87 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.87 Ship's cargo elevators. (a) Safe working load. The safe workin...

Safe practices and financial considerations in using oral chemotherapeutic agents.

PubMed

Bartel, Sylvia B

2007-05-01

Safe handling practices and financial concerns associated with oral chemotherapy in non-traditional settings are discussed. Oral chemotherapy may pose a risk to patients because of a narrow therapeutic index, complex dosing regimen, dispensing by community pharmacists without prescription order review by an oncology pharmacist or nurse, or self-administration in the home or another nontraditional setting, where patient monitoring is infrequent. Errors in prescribing, dispensing, and administration and patient or caregiver misunderstandings are potential problems with the use of oral chemotherapy that need to be addressed when developing safe practices. Changes in Medicare pharmaceutical reimbursement rates and rules need to be monitored because they have the potential to affect patient care and outcomes. Patient assistance programs and advocacy groups can help alleviate financial concerns associated with oral chemotherapy. Consensus guidelines specific to safe handling of oral chemotherapy in the home or other nontraditional setting need to be developed. Also, healthcare providers must understand reimbursement and provide direction to patients when patient assistance programs or advocacy groups can assist with the financial challenges of oral chemotherapy.

Department of the Navy FY 1990/FY 1991 Biennial Budget Estimates. Military Construction and Family Housing Program FY 1991. Justification Data Submitted to Congress

DTIC Science & Technology

1989-01-01

environmental review process as indicated by the County Traffic Engineers for safe and secure transport of ordnance as well as the chosen alternative...from other appropriations: None. PRVOSEDITION$ MAY SE USED ITRALDD DE 7 PG NO.DD • 391C UNTIL XHAUSTEDP N. S.PRRMELMN . CATGOR OO 7..POETNMER U JC...service. IMPACT IF NOT PROVIDED: Activity must rely r.n truck refuelers which are not Capable of handling the demand. Time delays, logisticA and safety

Pilot Plant Makes Oxygen Difluoride

NASA Technical Reports Server (NTRS)

Humphrey, Marshall F.; Lawton, Emil A.

1989-01-01

Pilot plant makes oxygen difluoride highly-energetic, space-storable oxidizer not made commercially. Designed to handle reactants, product, and byproduct, most of which highly reactive, corrosive, and toxic. Oxygen difluoride evolves continuously from reactor containing potassium hydroxide in water at 10 degree C. Collection tanks alternated; one filled while other drained to storage cylinder. Excess OF2 and F2 dissipated in combustion of charcoal in burn barrel. Toxic byproduct, potassium fluoride, reacted with calcium hydroxide to form nontoxic calcium fluoride and to regenerate potassium hydroxide. Equipment processes toxic, difficult-to-make substance efficiently and safely.

Differences among nursing homes in outcomes of a safe resident handling program.

PubMed

Kurowski, Alicia; Gore, Rebecca; Buchholz, Bryan; Punnett, Laura

2012-01-01

A large nursing home corporation implemented a safe resident handling program (SRHP) in 2004-2007. We evaluated its efficacy over a 2-year period by examining differences among 5 centers in program outcomes and potential predictors of those differences. We observed nursing assistants (NAs), recording activities and body postures at 60-second intervals on personal digital assistants at baseline and at 3-month, 12-month, and 24-month follow-ups. The two outcomes computed were change in equipment use during resident handling and change in a physical workload index that estimated spinal loading due to body postures and handled loads. Potential explanatory factors were extracted from post-observation interviews, investigator surveys of the workforce, from administrative data, and employee satisfaction surveys. The facility with the most positive outcome measures was associated with many positive changes in explanatory factors and the facility with the fewest positive outcome measures experienced negative changes in the same factors. These findings suggest greater SRHP benefits where there was lower NA turnover and agency staffing; less time pressure; and better teamwork, staff communication, and supervisory support. © 2012 American Society for Healthcare Risk Management of the American Hospital Association.

High density operation for reactor-relevant power exhaust

NASA Astrophysics Data System (ADS)

Wischmeier, M.; ASDEX Upgrade Team; Jet Efda Contributors

2015-08-01

With increasing size of a tokamak device and associated fusion power gain an increasing power flux density towards the divertor needs to be handled. A solution for handling this power flux is crucial for a safe and economic operation. Using purely geometric arguments in an ITER-like divertor this power flux can be reduced by approximately a factor 100. Based on a conservative extrapolation of current technology for an integrated engineering approach to remove power deposited on plasma facing components a further reduction of the power flux density via volumetric processes in the plasma by up to a factor of 50 is required. Our current ability to interpret existing power exhaust scenarios using numerical transport codes is analyzed and an operational scenario as a potential solution for ITER like divertors under high density and highly radiating reactor-relevant conditions is presented. Alternative concepts for risk mitigation as well as strategies for moving forward are outlined.

Adherence to Safe Handling Guidelines by Health Care Workers Who Administer Antineoplastic Drugs

PubMed Central

Boiano, James M.; Steege, Andrea L.; Sweeney, Marie H.

2015-01-01

The toxicity of antineoplastic drugs is well documented. Many are known or suspected human carcinogens where no safe exposure level exists. Authoritative guidelines developed by professional practice organizations and federal agencies for the safe handling of these hazardous drugs have been available for nearly three decades. As a means of evaluating the extent of use of primary prevention practices such as engineering, administrative and work practice controls, personal protective equipment (PPE), and barriers to using PPE, the National Institute for Safety and Health (NIOSH) conducted a web survey of health care workers in 2011. The study population primarily included members of professional practice organizations representing health care occupations which routinely use or come in contact with selected chemical agents. All respondents who indicated that they administered antineoplastic drugs in the past week were eligible to complete a hazard module addressing self-reported health and safety practices on this topic. Most (98%) of the 2069 respondents of this module were nurses. Working primarily in hospitals, outpatient care centers, and physician offices, respondents reported that they had collectively administered over 90 specific antineoplastic drugs in the past week, with carboplatin, cyclophosphamide, and paclitaxel the most common. Examples of activities which increase exposure risk, expressed as percent of respondents, included: failure to wear nonabsorbent gown with closed front and tight cuffs (42%); intravenous (I.V.) tubing primed with antineoplastic drug by respondent (6%) or by pharmacy (12%); potentially contaminated clothing taken home (12%); spill or leak of antineoplastic drug during administration (12%); failure to wear chemotherapy gloves (12%); and lack of hazard awareness training (4%). The most common reason for not wearing gloves or gowns was “skin exposure was minimal”; 4% of respondents, however, reported skin contact during handling and administration. Despite the longstanding availability of safe handling guidance, recommended practices are not always followed, underscoring the importance of training and education for employers and workers. PMID:24766408

Precautionary Practices of Respiratory Therapists and Other Health-Care Practitioners Who Administer Aerosolized Medications

PubMed Central

Tsai, Rebecca J; Boiano, James M; Steege, Andrea L; Sweeney, Marie H

2015-01-01

BACKGROUND: Respiratory therapists (RTs) and other health-care workers are potentially exposed to a variety of aerosolized medications. The National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers describes current exposure control practices and barriers to using personal protective equipment during administration of selected aerosolized medications. METHODS: An anonymous, multi-module, web-based survey was conducted among members of health-care professional practice organizations representing RTs, nurses, and other health-care practitioners. A module on aerosolized medications included submodules for antibiotics (amikacin, colistin, and tobramycin), pentamidine, and ribavirin. RESULTS: The submodules on antibiotics, pentamidine, and ribavirin were completed by 321, 227, and 50 respondents, respectively, most of whom were RTs. The relatively low number of ribavirin respondents precluded meaningful interpretation of these data and may reflect the rare use of this drug. Consequently, analysis focused on pentamidine, classified by NIOSH as a hazardous drug, and the antibiotics amikacin, colistin, and tobramycin, which currently lack authoritative safe handling guidelines. Respondents who administered pentamidine were more likely to adhere to good work practices compared with those who administered the antibiotics. Examples included training received on safe handling procedures (75% vs 52%), availability of employer standard procedures (82% vs 55%), use of aerosol delivery devices equipped with an expiratory filter (96% vs 53%) or negative-pressure rooms (61% vs 20%), and always using respiratory protection (51% vs 13%). CONCLUSIONS: Despite the availability of safe handling guidelines for pentamidine, implementation was not universal, placing workers, co-workers, and even family members at risk of exposure. Although the antibiotics included in this study lack authoritative safe handling guidelines, prudence dictates that appropriate exposure controls be used to minimize exposure to the antibiotics and other aerosolized medications. Employers and employees share responsibility for ensuring that precautionary measures are taken to keep exposures to all aerosolized medications as low as practicable. PMID:26152473

Precautionary Practices of Respiratory Therapists and Other Health-Care Practitioners Who Administer Aerosolized Medications.

PubMed

Tsai, Rebecca J; Boiano, James M; Steege, Andrea L; Sweeney, Marie H

2015-10-01

Respiratory therapists (RTs) and other health-care workers are potentially exposed to a variety of aerosolized medications. The National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers describes current exposure control practices and barriers to using personal protective equipment during administration of selected aerosolized medications. An anonymous, multi-module, web-based survey was conducted among members of health-care professional practice organizations representing RTs, nurses, and other health-care practitioners. A module on aerosolized medications included submodules for antibiotics (amikacin, colistin, and tobramycin), pentamidine, and ribavirin. The submodules on antibiotics, pentamidine, and ribavirin were completed by 321, 227, and 50 respondents, respectively, most of whom were RTs. The relatively low number of ribavirin respondents precluded meaningful interpretation of these data and may reflect the rare use of this drug. Consequently, analysis focused on pentamidine, classified by NIOSH as a hazardous drug, and the antibiotics amikacin, colistin, and tobramycin, which currently lack authoritative safe handling guidelines. Respondents who administered pentamidine were more likely to adhere to good work practices compared with those who administered the antibiotics. Examples included training received on safe handling procedures (75% vs 52%), availability of employer standard procedures (82% vs 55%), use of aerosol delivery devices equipped with an expiratory filter (96% vs 53%) or negative-pressure rooms (61% vs 20%), and always using respiratory protection (51% vs 13%). Despite the availability of safe handling guidelines for pentamidine, implementation was not universal, placing workers, co-workers, and even family members at risk of exposure. Although the antibiotics included in this study lack authoritative safe handling guidelines, prudence dictates that appropriate exposure controls be used to minimize exposure to the antibiotics and other aerosolized medications. Employers and employees share responsibility for ensuring that precautionary measures are taken to keep exposures to all aerosolized medications as low as practicable. Copyright © 2015 by Daedalus Enterprises.

Touch Temperature Coating for Off-the-Shelf Electrical Equipment Used on Spacecraft

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Brady, Timothy K.

2010-01-01

Off-the-shelf electrical equipment is frequently used in space-based applications to control costs. However, the reduced heat transfer in the spacecraft microgravity environment causes the equipment to operate at significantly higher temperatures than it would in terrestrial applications. This creates touch temperature issues where items particularly metallic ones become too hot for the crew to handle safely. A touch temperature coating layup has been developed that can be added to spacebased electrically powered hardware. The coating allows the crew to safely handle the hardware, but only slightly impedes the heat transfer from the component during normal operation. In the present work, the coating generic requirements are developed and a layup is described that meets these specifications. Analytical and experimental results are presented that demonstrate the ability of the coating layup to increase the allowable limits of touch temperature while only marginally degrading heat transfer to the environment. This allows the spacecraft crew to handle objects that, if not coated, would be hot enough to cause pain or skin damage.

Current challenges in European oncology pharmacy practice.

PubMed

Hoppe-Tichy, Torsten

2010-03-01

The demand for pharmacy cancer services is expected to at least double over the next 10 years, as the population ages and new treatments are introduced. Safe and efficient handling of cytotoxic products minimises risks to staff and reduces medication errors. To identify and describe strategies for coping safely and effectively with heavier workloads in the hospital oncology pharmacy, currently and in the future. The PubMed database was searched for literature on approaches to safe handling of antineoplastic agents and to decreasing medication errors in the hospital pharmacy. Articles that were judged to be of prime importance to the hospital oncologist were reviewed. These safety concepts are put into the context of contemporary hospital oncology pharmacy practice through discussion of key issues, including increased demand, the role of the pharmacist in determining the hospital formulary, and growth in patient preferences for oral chemotherapy. Recommendations on best practices are also provided, based on relevant literature and author experience. Efficient, safe hospital pharmacy operations can be aided by capacity planning, dose banding, and knowledge of novel products and procedures that can reduce risks to health while increasing the number of patients who are safely treated. Consideration may also be given to the economic role of oncology pharmacists in formulary development.

Structural interaction with transportation and handling systems

NASA Technical Reports Server (NTRS)

1973-01-01

Problems involved in the handling and transportation of finished space vehicles from the factory to the launch site are presented, in addition to recommendations for properly accounting for in space vehicle structural design, adverse interactions during transportation. Emphasis is given to the protection of vehicle structures against those environments and loads encountered during transportation (including temporary storage) which would exceed the levels that the vehicle can safely withstand. Current practices for verifying vehicle safety are appraised, and some of the capabilities and limitations of transportation and handling systems are summarized.

Hazard Control Extensions in a COTS Based Data Handling System

NASA Astrophysics Data System (ADS)

Vogel, Torsten; Rakers, Sven; Gronowski, Matthias; Schneegans, Joachim

2011-08-01

EML is an electromagnetic levitator for containerless processing of conductive samples on the International Space Station. This material sciences experiment is running in the European Drawer Rack (EDR) facility. The objective of this experiment is to gain insight into the parameters of liquid metal samples and their crystallisation processes without the influence of container walls. To this end the samples are electromagnetically positioned in a coil system and then heated up beyond their melting point in an ultraclean environment.The EML programme is currently under development by Astrium Space Transportation in Friedrichshafen and Bremen; jointly funded by ESA and DLR (on behalf of BMWi, contract 50WP0808). EML consists of four main modules listed in Table 1. The paper focuses mainly on the architecture and design of the ECM module and its contribution to a safe operation of the experiment. The ECM is a computer system that integrates the power supply to the EML experiment, control functions and video handling and compression features. Experiment control is performed by either telecommand or the execution of predefined experiment scripts.

Safe syringe disposal is related to safe syringe access among HIV-positive injection drug users.

PubMed

Coffin, Phillip O; Latka, Mary H; Latkin, Carl; Wu, Yingfeng; Purcell, David W; Metsch, Lisa; Gomez, Cynthia; Gourevitch, Marc N

2007-09-01

We evaluated the effect of syringe acquisition on syringe disposal among HIV-positive injection drug users (IDUs) in Baltimore, New York City, and San Francisco (N = 680; mean age 42 years, 62% male, 59% African-American, 21% Hispanic, 12% White). Independent predictors of safe disposal were acquiring syringes through a safe source and ever visiting a syringe exchange program. Weaker predictors included living in San Francisco, living in the area longer, less frequent binge drinking, injecting with an HIV+ partner, peer norms supporting safe injection, and self-empowerment. Independent predictors of safe "handling"-both acquiring and disposing of syringes safely-also included being from New York and being older. HIV-positive IDUs who obtain syringes from a safe source are more likely to safely dispose; peer norms contribute to both acquisition and disposal. Interventions to improve disposal should include expanding sites of safe syringe acquisition while enhancing disposal messages, alternatives, and convenience.

Method and apparatus for in-cell vacuuming of radiologically contaminated materials

DOEpatents

Spadaro, Peter R.; Smith, Jay E.; Speer, Elmer L.; Cecconi, Arnold L.

1987-01-01

A vacuum air flow operated cyclone separator arrangement for collecting, handling and packaging loose contaminated material in accordance with acceptable radiological and criticality control requirements. The vacuum air flow system includes a specially designed fail-safe prefilter installed upstream of the vacuum air flow power supply. The fail-safe prefilter provides in-cell vacuum system flow visualization and automatically reduces or shuts off the vacuum air flow in the event of an upstream prefilter failure. The system is effective for collecting and handling highly contaminated radiological waste in the form of dust, dirt, fuel element fines, metal chips and similar loose material in accordance with radiological and criticality control requirements for disposal by means of shipment and burial.

A Draft Protocol for Detecting Possible Biohazards in Martian Samples Returned to Earth

NASA Technical Reports Server (NTRS)

Viso, M.; DeVincenzi, D. L.; Race, M. S.; Schad, P. J.; Stabekis, P. D.; Acevedo, S. E.; Rummel, J. D.

2002-01-01

In preparation for missions to Mars that will involve the return of samples, it is necessary to prepare for the safe receiving, handling, testing, distributing, and archiving of martian materials here on Earth. Previous groups and committees have studied selected aspects of sample return activities, but a specific protocol for handling and testing of returned -=1 samples from Mars remained to be developed. To refine the requirements for Mars sample hazard testing and to develop criteria for the subsequent release of sample materials from precautionary containment, NASA Planetary Protection Officer, working in collaboration with CNES, convened a series of workshops to produce a Protocol by which returned martian sample materials could be assessed for biological hazards and examined for evidence of life (extant or extinct), while safeguarding the samples from possible terrestrial contamination. The Draft Protocol was then reviewed by an Oversight and Review Committee formed specifically for that purpose and composed of senior scientists. In order to preserve the scientific value of returned martian samples under safe conditions, while avoiding false indications of life within the samples, the Sample Receiving Facility (SRF) is required to allow handling and processing of the Mars samples to prevent their terrestrial contamination while maintaining strict biological containment. It is anticipated that samples will be able to be shipped among appropriate containment facilities wherever necessary, under procedures developed in cooperation with international appropriate institutions. The SRF will need to provide different types of laboratory environments for carrying out, beyond sample description and curation, the various aspects of the protocol: Physical/Chemical analysis, Life Detection testing, and Biohazard testing. The main principle of these tests will be described and the criteria for release will be discussed, as well as the requirements for the SRF and its personnel.

Handling System for Iridium-192 Seeds

NASA Technical Reports Server (NTRS)

Carpenter, W.; Wodicka, D.

1973-01-01

A complete system is proposed for safe handling of iridium-192 seeds used to internally irradiate malignant growths. A vibratory hopper feeds the seeds onto a transport system for deposit in a magazine or storage area. A circular magazine consisting of segmented plastic tubing with holes in the walls to accommodate the seeds seems feasible. The magazine is indexed to stop and release a seed for calibration and deposition.

Oxygen Handling and Cooling Options in High Temperature Electrolysis Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manohar S. Sohal; J. Stephen Herring

2008-07-01

Idaho National Laboratory is working on a project to generate hydrogen by high temperature electrolysis (HTE). In such an HTE system, safety precautions need to be taken to handle high temperature oxygen at ~830°C. This report is aimed at addressing oxygen handling in a HTE plant.. Though oxygen itself is not flammable, most engineering material, including many gases and liquids, will burn in the presence of oxygen under some favorable physicochemical conditions. At present, an absolute set of rules does not exist that can cover all aspects of oxygen system design, material selection, and operating practices to avoid subtle hazardsmore » related to oxygen. Because most materials, including metals, will burn in an oxygen-enriched environment, hazards are always present when using oxygen. Most materials will ignite in an oxygen-enriched environment at a temperature lower than that in air, and once ignited, combustion rates are greater in the oxygen-enriched environment. Even many metals, if ignited, burn violently in an oxygen-enriched environment. However, these hazards do not preclude the operations and systems involving oxygen. Oxygen can be safely handled and used if all the materials in a system are not flammable in the end-use environment or if ignition sources are identified and controlled. In fact, the incidence of oxygen system fires is reported to be low with a probability of about one in a million. This report is a practical guideline and tutorial for the safe operation and handling of gaseous oxygen in high temperature electrolysis system. The intent is to provide safe, practical guidance that permits the accomplishment of experimental operations at INL, while being restrictive enough to prevent personnel endangerment and to provide reasonable facility protection. Adequate guidelines are provided to govern various aspects of oxygen handling associated with high temperature electrolysis system to generate hydrogen. The intent here is to present acceptable oxygen standards and practices for minimum safety requirements. A summary of operational hazards, along with oxygen safety and emergency procedures, are provided.« less

Effects of organizational safety practices and perceived safety climate on PPE usage, engineering controls, and adverse events involving liquid antineoplastic drugs among nurses.

PubMed

DeJoy, David M; Smith, Todd D; Woldu, Henok; Dyal, Mari-Amanda; Steege, Andrea L; Boiano, James M

2017-07-01

Antineoplastic drugs pose risks to the healthcare workers who handle them. This fact notwithstanding, adherence to safe handling guidelines remains inconsistent and often poor. This study examined the effects of pertinent organizational safety practices and perceived safety climate on the use of personal protective equipment, engineering controls, and adverse events (spill/leak or skin contact) involving liquid antineoplastic drugs. Data for this study came from the 2011 National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers which included a sample of approximately 1,800 nurses who had administered liquid antineoplastic drugs during the past seven days. Regression modeling was used to examine predictors of personal protective equipment use, engineering controls, and adverse events involving antineoplastic drugs. Approximately 14% of nurses reported experiencing an adverse event while administering antineoplastic drugs during the previous week. Usage of recommended engineering controls and personal protective equipment was quite variable. Usage of both was better in non-profit and government settings, when workers were more familiar with safe handling guidelines, and when perceived management commitment to safety was higher. Usage was poorer in the absence of specific safety handling procedures. The odds of adverse events increased with number of antineoplastic drugs treatments and when antineoplastic drugs were administered more days of the week. The odds of such events were significantly lower when the use of engineering controls and personal protective equipment was greater and when more precautionary measures were in place. Greater levels of management commitment to safety and perceived risk were also related to lower odds of adverse events. These results point to the value of implementing a comprehensive health and safety program that utilizes available hazard controls and effectively communicates and demonstrates the importance of safe handling practices. Such actions also contribute to creating a positive safety climate.

Dairy cow handling facilities and the perception of Beef Quality Assurance on Colorado dairies.

PubMed

Adams, A E; Olea-Popelka, F J; Grandin, T; Woerner, D R; Roman-Muniz, I N

2014-02-01

A survey was conducted on Colorado dairies to assess attitudes and practices regarding Dairy Beef Quality Assurance (DBQA). The objectives were to (1) assess the need for a new handling facility that would allow all injections to be administered via DBQA standards; (2) establish if Colorado dairy producers are concerned with DBQA; and (3) assess differences in responses between dairy owners and herdsmen. Of the 95 dairies contacted, 20 (21%) agreed to participate, with a median herd size of 1,178. When asked to rank the following 7 traits--efficiency, animal safety, human safety, ease of animal handling, ease of operation, inject per Beef Quality Assurance (BQA) procedures, and cost--in order of priority when designing a new handling facility, human and animal safety were ranked highest in priority (first or second) by the majority of participants, with ease of animal handling and efficiency ranked next. Interestingly, the administration of injections per BQA standards was ranked sixth or seventh by most participants. Respondents estimated the average annual income from the sale of cull cows to be 4.6% of all dairy income, with 50% receiving at least one carcass discount or condemnation in the past 12 mo. Although almost all of the participating dairy farmers stated that the preferred injection site for medications was the neck region, a significant number admitted to using alternate injection sites. In contrast, no difference was found between responses regarding the preferred and actual location for intravenous injections. Although most participating producers are aware of BQA injection guidelines, they perceive efficiency as more important, which could result in injections being administered in locations not promoted by BQA. Dairy owners and herdsmen disagreed in whether or not workers had been injured in the animal handling area in the last 12 mo. Handling facilities that allow for an efficient and safe way to administer drugs according to BQA guidelines and educational opportunities that highlight the effect of improved DBQA on profitability could prove useful. Dairy producers play a key role in ensuring that dairy beef is safe and high quality, and just as they are committed to producing safe and nutritious milk for their customers, they should be committed to producing the best quality beef. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Summer trapping method for mule deer. [Nevada Test Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giles, K.R.

1979-07-01

A summer mule deer trapping method which uses modified Clover traps in a circular corral with water as a bait is described. Drug restraint was used to facilitate safe handling of mule deer by the investigator. Fifteen mule deer were safely captured and outfitted with radio transmitters, ear tags, and reflective markers, and their movements monitored to determine migration patterns.

Keeping Kids Safe: A Guide for Safe Food Handling & Sanitation for Child Care Providers.

ERIC Educational Resources Information Center

Food Safety and Inspection Service (USDA), Washington, DC.

Because children under age 5 are susceptible to food-borne illnesses and children in diapers present special sanitation and health problems, food safety and sanitation are emerging as important issues for child care providers. This booklet is designed to give providers and parents a quick and easy reference for food safety and sanitation. The…

IHR (2005) Compliance: Laboratory Capacities and Biological Risks

DTIC Science & Technology

2014-08-01

Preparedness 6. Risk communication 7. Human resources 8. Laboratory Other obligations/Potential Hazards: 9. Points of entry 10. Zoonotic events 11. Food ...of personal protected equipment, 3) safe injection practices, 4) safe handling of potentially contaminated equipment and surfaces, and 5...Any public health event of international or national concern (infectious, zoonotic, food borne, chemical, radio nuclear, or due to unknown

29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

Code of Federal Regulations, 2014 CFR

2014-07-01

... beams or other house fall block supports shall be marked with the safe working load, which shall not be... depends upon components other than commonly used stock items such as shackles, ropes, or chains, and that... (c)(6) of this section). Single sheave blocks shall be marked with safe working loads and proof test...

29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

Code of Federal Regulations, 2011 CFR

2011-07-01

... beams or other house fall block supports shall be marked with the safe working load, which shall not be... depends upon components other than commonly used stock items such as shackles, ropes, or chains, and that... (c)(6) of this section). Single sheave blocks shall be marked with safe working loads and proof test...

29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... beams or other house fall block supports shall be marked with the safe working load, which shall not be... depends upon components other than commonly used stock items such as shackles, ropes, or chains, and that... (c)(6) of this section). Single sheave blocks shall be marked with safe working loads and proof test...

29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... beams or other house fall block supports shall be marked with the safe working load, which shall not be... depends upon components other than commonly used stock items such as shackles, ropes, or chains, and that... (c)(6) of this section). Single sheave blocks shall be marked with safe working loads and proof test...

29 CFR 1917.50 - Certification of marine terminal material handling devices (See also mandatory appendix I, of...

Code of Federal Regulations, 2012 CFR

2012-07-01

... beams or other house fall block supports shall be marked with the safe working load, which shall not be... depends upon components other than commonly used stock items such as shackles, ropes, or chains, and that... (c)(6) of this section). Single sheave blocks shall be marked with safe working loads and proof test...

Unintended shootings in a large metropolitan area: an incident-based analysis.

PubMed

Ismach, Richard B; Reza, Avid; Ary, Roy; Sampson, Tomoko Rie; Bartolomeos, Kidist; Kellermann, Arthur L

2003-01-01

We determine the proportion of unintended shootings that might be prevented by promoting safe storage, safe handling, and/or safer firearm designs. A regional firearm injury surveillance system was used to identify fatal and nonfatal unintentional shootings in a 5-county metropolitan area. Case reports were reviewed, and the causes of each shooting were independently classified by 4 members of the research team. A consensus conference was held to resolve disagreements. Between May 1, 1996, and June 30, 2000, 216 cases of unintentional firearm injury were identified, 3.8% of the shootings documented during the study period. Six (2.8%) were fatal. The majority of victims were between 15 and 34 years of age. One fourth (54) of the shootings involved victims younger than 18 years. Handguns were involved in 87% of the incidents. Enough information was available to characterize the incident in 122 (57%) cases. All but 6 fell into 1 or more of 3 broad categories of causation: Child access (14%), mishandling (74%), and/or deficiencies in firearm design (32%). Many unintentional shootings could be prevented by promoting safe storage of guns in the home, promoting safe handling of firearms, and requiring that all new handguns incorporate basic safety features.

Data Safe Havens and Trust: Toward a Common Understanding of Trusted Research Platforms for Governing Secure and Ethical Health Research

PubMed Central

Nicholls, Jacqueline; Dobbs, Christine; Sethi, Nayha; Cunningham, James; Ainsworth, John; Heaven, Martin; Peacock, Trevor; Peacock, Anthony; Jones, Kerina; Laurie, Graeme; Kalra, Dipak

2016-01-01

In parallel with the advances in big data-driven clinical research, the data safe haven concept has evolved over the last decade. It has led to the development of a framework to support the secure handling of health care information used for clinical research that balances compliance with legal and regulatory controls and ethical requirements while engaging with the public as a partner in its governance. We describe the evolution of 4 separately developed clinical research platforms into services throughout the United Kingdom-wide Farr Institute and their common deployment features in practice. The Farr Institute is a case study from which we propose a common definition of data safe havens as trusted platforms for clinical academic research. We use this common definition to discuss the challenges and dilemmas faced by the clinical academic research community, to help promote a consistent understanding of them and how they might best be handled in practice. We conclude by questioning whether the common definition represents a safe and trustworthy model for conducting clinical research that can stand the test of time and ongoing technical advances while paying heed to evolving public and professional concerns. PMID:27329087

40 CFR 63.923 - Standards-Container Level 2 controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES... other requirements for the safe handling of flammable, combustible, explosive, reactive, or hazardous...

Observation of High School Students' Food Handling Behaviors: Do They Improve following a Food Safety Education Intervention?

PubMed

Diplock, Kenneth J; Dubin, Joel A; Leatherdale, Scott T; Hammond, David; Jones-Bitton, Andria; Majowicz, Shannon E

2018-06-01

Youth are a key audience for food safety education. They often engage in risky food handling behaviors, prepare food for others, and have limited experience and knowledge of safe food handling practices. Our goal was to investigate the effectiveness of an existing food handler training program for improving safe food handling behaviors among high school students in Ontario, Canada. However, because no schools agreed to provide control groups, we evaluated whether behaviors changed following delivery of the intervention program and whether changes were sustained over the school term. We measured 32 food safety behaviors, before the intervention and at 2-week and 3-month follow-up evaluations by in-person observations of students ( n = 119) enrolled in grade 10 and 12 Food and Nutrition classes ( n = 8) and who individually prepared recipes. We examined within-student changes in behaviors across the three time points, using mixed effects regression models to model trends in the total food handling score (of a possible 32 behaviors) and subscores for "clean" (17 behaviors), "separate" (14 behaviors), and "cook" (1 behavior), adjusting for student characteristics. At baseline, students ( n = 108) averaged 49.1% (15.7 of 32 behaviors; standard deviation = 5.8) correct food handling behaviors, and only 5.5% (6) of the 108 students used a food thermometer to check the doneness of the chicken (the "cook" behavior). All four behavior score types increased significantly ∼2 weeks postintervention and remained unchanged ∼3 months later. Student characteristics (e.g., having taken a prior food handling course) were not significant predictors of the total number of correctly performed food handling behaviors or of the "clean" or "separate" behaviors, working or volunteering in a food service establishment was the only characteristic significantly associated with food thermometer use (i.e., "cook"). Despite the significant increase in correct behaviors, students continued to use risky practices postintervention, suggesting that the risk of foodborne disease remained.

A prospective three-step intervention study to prevent medication errors in drug handling in paediatric care.

PubMed

Niemann, Dorothee; Bertsche, Astrid; Meyrath, David; Koepf, Ellen D; Traiser, Carolin; Seebald, Katja; Schmitt, Claus P; Hoffmann, Georg F; Haefeli, Walter E; Bertsche, Thilo

2015-01-01

To prevent medication errors in drug handling in a paediatric ward. One in five preventable adverse drug events in hospitalised children is caused by medication errors. Errors in drug prescription have been studied frequently, but data regarding drug handling, including drug preparation and administration, are scarce. A three-step intervention study including monitoring procedure was used to detect and prevent medication errors in drug handling. After approval by the ethics committee, pharmacists monitored drug handling by nurses on an 18-bed paediatric ward in a university hospital prior to and following each intervention step. They also conducted a questionnaire survey aimed at identifying knowledge deficits. Each intervention step targeted different causes of errors. The handout mainly addressed knowledge deficits, the training course addressed errors caused by rule violations and slips, and the reference book addressed knowledge-, memory- and rule-based errors. The number of patients who were subjected to at least one medication error in drug handling decreased from 38/43 (88%) to 25/51 (49%) following the third intervention, and the overall frequency of errors decreased from 527 errors in 581 processes (91%) to 116/441 (26%). The issue of the handout reduced medication errors caused by knowledge deficits regarding, for instance, the correct 'volume of solvent for IV drugs' from 49-25%. Paediatric drug handling is prone to errors. A three-step intervention effectively decreased the high frequency of medication errors by addressing the diversity of their causes. Worldwide, nurses are in charge of drug handling, which constitutes an error-prone but often-neglected step in drug therapy. Detection and prevention of errors in daily routine is necessary for a safe and effective drug therapy. Our three-step intervention reduced errors and is suitable to be tested in other wards and settings. © 2014 John Wiley & Sons Ltd.

Food Handling Behaviors Observed in Consumers When Cooking Poultry and Eggs.

PubMed

Maughan, Curtis; Chambers, Edgar; Godwin, Sandria; Chambers, Delores; Cates, Sheryl; Koppel, Kadri

2016-06-01

Previous research has shown that many consumers do not follow recommended food safety practices for cooking poultry and eggs, which can lead to exposure to Salmonella and Campylobacter. Past research has been done primarily through surveys and interviews, rather than observations. The objective of this project was to determine through observations whether consumers follow food safety guidelines. Consumers (n = 101) divided among three locations (Manhattan, KS; Kansas City, MO area; and Nashville, TN) were observed as they prepared a baked whole chicken breast, a pan-fried ground turkey patty, a fried egg, and scrambled eggs. The end point temperature for the cooked products was taken (outside the view of consumers) within 30 s after the consumers indicated they were finished cooking. Thermometer use while cooking was low, although marginally higher than that of some previous studies: only 37% of consumers used a thermometer for chicken breasts and only 22% for turkey patties. No one used a thermometer for fried or scrambled eggs. Only 77% of the chicken and 69% of the turkey was cooked to a safe temperature (165°F [74°C]), and 77% of scrambled and 49% of fried eggs reached a safe temperature (160°F [71°C]). Safe hand washing was noted in only 40% of respondents after handling the chicken breast and 44% after handling the ground turkey patty. This value decreased to 15% after handling raw eggs for fried eggs and to 17% for scrambled eggs. These results show that there is a high prevalence of unsafe behaviors (undercooking and poor hand washing technique) when cooking poultry and eggs and a great need for improvement in consumer behavior with poultry and eggs.

Nontoxic Resins Advance Aerospace Manufacturing

NASA Technical Reports Server (NTRS)

2009-01-01

The 2008 NASA Commercial Invention of the Year, PETI-330, is a polyimide matrix resin that performs well at high temperatures and is easily processed into composites in a simple, short curing cycle. Invented by scientists at Langley Research Center, PETI-330 is now licensed to Ube Industries, based in Japan with its American headquarters in New York. In addition to being durable and lightweight, the resin is also nontoxic, which makes it safe for workers to handle. PETI-330 was created specifically for heat-resistant composites formed with resin transfer molding and resin infusion, which formerly could only be used with low temperature resin systems.

Exploring varieties of knowledge in safe work practices - an ethnographic study of surgical teams

PubMed Central

2011-01-01

Background Within existing research in health and medicine, the nature of knowledge on how teams conduct safe work practices has yet to be properly explored. Methods We address this concern by exploring the varieties in which knowledge is expressed during interdisciplinary surgical operations. Specifically, the study was conducted in a surgical section of a Norwegian regional general hospital, between January and April of 2010, by means of an ethnographic design combining detailed non-participant observations, conversations and semi-structured interviews. Results Based on an analysis of the gathered data, we identify three particular themes in how knowledge is expressed by operating room personnel: (i) the ability and variety individuals demonstrate in handling multiple sources of information, before reaching a particular decision, (ii) the variety of ways awareness or anticipation of future events is expressed, and (iii) the different ways sudden and unexpected situations are handled by the individual team members. Conclusions We conclude that these facets of knowledge bring different insights into how safe work practices are achieved at an individual and team level in surgical operations, thus adding to the existing understanding of the nature of knowledge in safe work practices in surgical operations. Future research should focus on exploring and documenting the relationships between various elements of knowledge and safe work practices, in different surgical settings and countries. PMID:21914183

Method for making a low density polyethylene waste form for safe disposal of low level radioactive material

DOEpatents

Colombo, P.; Kalb, P.D.

1984-06-05

In the method of the invention low density polyethylene pellets are mixed in a predetermined ratio with radioactive particulate material, then the mixture is fed through a screw-type extruder that melts the low density polyethylene under a predetermined pressure and temperature to form a homogeneous matrix that is extruded and separated into solid monolithic waste forms. The solid waste forms are adapted to be safely handled, stored for a short time, and safely disposed of in approved depositories.

49 CFR 176.150 - Radio and radar.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., unloaded, or handled, the responsible person must ensure that all sources of electromagnetic radiation such... are sensitive to electromagnetic radiation from external sources must be stowed at a safe distance...

49 CFR 176.150 - Radio and radar.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., unloaded, or handled, the responsible person must ensure that all sources of electromagnetic radiation such... are sensitive to electromagnetic radiation from external sources must be stowed at a safe distance...

49 CFR 176.150 - Radio and radar.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., unloaded, or handled, the responsible person must ensure that all sources of electromagnetic radiation such... are sensitive to electromagnetic radiation from external sources must be stowed at a safe distance...

49 CFR 176.150 - Radio and radar.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., unloaded, or handled, the responsible person must ensure that all sources of electromagnetic radiation such... are sensitive to electromagnetic radiation from external sources must be stowed at a safe distance...

49 CFR 176.150 - Radio and radar.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., unloaded, or handled, the responsible person must ensure that all sources of electromagnetic radiation such... are sensitive to electromagnetic radiation from external sources must be stowed at a safe distance...

Adoption of the B2SAFE EUDAT replication service by the EPOS community

NASA Astrophysics Data System (ADS)

Cacciari, Claudio; Fares, Massimo; Fiameni, Giuseppe; Michelini, Alberto; Danecek, Peter; Wittenburg, Peter

2014-05-01

B2SAFE is the EUDAT service for moving and replicating data between sites and storage systems for different purposes. The goal of B2SAFE is to keep the data from a repository safe by replicating it across different geographical and administrative zones according to a set of well-defined policies. It is also a way to store large volumes of data permanently at those sites which are providing powerful on-demand data analysis facilities. In particular, B2SAFE operates on the domain of registered data where data objects are referable via persistent identifiers (PIDs). B2SAFE is more than just copying data because the PIDs must be carefully managed when data objects are moved or replicated. The EUDAT B2SAFE Service offers functionality to replicate datasets across different data centres in a safe and efficient way while maintaining all information required to easily find and query information about the replica locations. The information about the replica locations and other important information is stored in PID records, each managed in separate administrative domains. The B2SAFE Service is implemented as an iRODS module providing a set of iRODS rules or policies to interface with the EPIC handle API and uses the iRODS middleware to replicate datasets from a source data (or community) centre to a destination data centre. The definition of the dataset(s) to replicate is flexible and up to the communities using the B2SAFE service. While the B2SAFE is internally using the EPIC handle API, communities have the choice to use any PID system they prefer to assign PIDs to their digital objects. A reference to one or more EUDAT B2SAFE PIDs is returned by the B2SAFE service when a dataset is replicated. The presentation will introduce the problem space of B2SAFE, presents the achievements that have been made during the last year for enabling communities to make use of the B2SAFE service, demonstrates a EPOS use cases, outlines the commonalities and differences between the policies for B2SAFE, presents new developments towards a common service layer interface and a data policy management framework.

Safe patient handling perceptions and practices: a survey of acute care physical therapists.

PubMed

Olkowski, Brian F; Stolfi, Angela M

2014-05-01

Acute care physical therapists are at risk for developing work-related musculoskeletal disorders (WMSDs) due to manual patient handling. Safe patient handling (SPH) reduces WMSDs caused by manual handling. The purpose of this study was to describe the patient handling practices of acute care physical therapists and their perceptions regarding SPH. Additionally, this study determined whether an SPH program influences the patient handling practices and perceptions regarding SPH of acute care physical therapists. Subscribers to the electronic discussion board of American Physical Therapy Association's Acute Care Section were invited to complete a survey questionnaire. The majority of respondents used SPH equipment and practices (91.1%), were confident using SPH equipment and practices (93.8%), agreed that evidence supports the use of SPH equipment and practices (87.0%), and reported the use of SPH equipment and practices is feasible (92.2%). Respondents at a facility with an SPH program were more likely to use SPH equipment and practices, have received training in the use of SPH equipment and practices, agree that the use of SPH equipment and practices is feasible, and feel confident using SPH equipment and practices. The study might not reflect the perceptions and practices of the population of acute care physical therapists. Acute care physical therapists are trained to use SPH equipment and practices, use SPH equipment and practices, and have positive perceptions regarding SPH. Acute care physical therapists in a facility with an SPH program are more likely to use SPH equipment and practices, receive training in SPH equipment and practices, and have positive perceptions regarding SPH. Quasi-regulatory organizations should incorporate SPH programs into their evaluative standards.

Introduction to Pesticide Labels

EPA Pesticide Factsheets

Pesticide product labels provide critical information about how to safely and legally handle and use pesticide products. Unlike most other types of product labels, pesticide labels are legally enforceable. Learn about pesticide product labels.

Toxic hazards in aerial application.

DOT National Transportation Integrated Search

1962-04-01

An analysis of the hazards accompanying the aerial application of toxic pest-control chemicals are presented. The nature of teh chemicals, teh symptoms of toxicity, recommended treatment, and suggestions for safe-handling, are discussed

Say No to Raw Dough!

MedlinePlus

... Follow safe food handling practices when you are baking and cooking with flour and other raw ingredients: ... the recipe or package directions for cooking or baking at the proper temperature and for the specified ...

Paladin® (Dimethyl Disulfide, DMDS) Fumigant Safe Handling Guide

EPA Pesticide Factsheets

This liquid pre-plant soil fumigant pesticide poses potential exposure risk concerns, so the product label and Fumigant Management Plan (FMP) address personal protective equipment, air monitoring, and respiratory protection.

The Use of Molecular Oxygen in Pharmaceutical Manufacturing: Is Flow the Way to Go?

PubMed

Hone, Christopher A; Roberge, Dominique M; Kappe, C Oliver

2017-01-10

Molecular oxygen is arguably the greenest reagent available to the organic chemist. Most commonly, a diluted form of oxygen gas, consisting of less than 10 % O 2 in N 2 ("synthetic air"), is used in pharmaceutical and fine chemical batch manufacturing to effectively address safety concerns when handling molecular oxygen. Concentrations of O 2 in N 2 below 10 % are generally required to prevent the risk of combustions in the presence of flammable organic solvents ("limiting oxygen concentration"). Nonetheless, the use of pure oxygen is more efficient than using O 2 diluted with N 2 and can often provide enhanced reaction rates, resulting in significant improvements in product quality and process efficiency. This Concept takes into account recent studies to make the argument that, for liquid-phase aerobic oxidations, pure oxygen can indeed be handled safely on large scale by employing continuous-flow reactors, while also providing highly convincing synthetic and manufacturing benefits. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Occupational health hazards related to informal recycling of E-waste in India: An overview.

PubMed

Annamalai, Jayapradha

2015-01-01

The innovation in science and technology coupled with the change in lifestyle of an individual has made an incredible change in the electronic industry show casing an assorted range of new products every day to the world. India too has been impacted by this digital revolution where consumption of electronics goods grows at a rapid rate producing a large amount of waste electrical and electronic equipment. This substantial generation of electronic waste referred to as e-waste accompanied with the lack of stringent environmental laws and regulations for handling the hazardous e-waste has resulted in the cropping of number of informal sectors. Over 95% of the e-waste is treated and processed in the majority of urban slums of the country, where untrained workers carry out the dangerous procedures without personal protective equipment, which are detrimental not only to their health but also to the environment. This paper focuses on the occupational health hazards due to the informal recycling of e-waste and then proceeds to show the safe disposal methods for handling the large quantities of e-waste generated in this electronic era and thus finds a sustainable solution for the formal processing of e-waste.

Handling e-waste in developed and developing countries: initiatives, practices, and consequences.

PubMed

Sthiannopkao, Suthipong; Wong, Ming Hung

2013-10-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. Copyright © 2012 Elsevier B.V. All rights reserved.

Occupational health hazards related to informal recycling of E-waste in India: An overview

PubMed Central

Annamalai, Jayapradha

2015-01-01

The innovation in science and technology coupled with the change in lifestyle of an individual has made an incredible change in the electronic industry show casing an assorted range of new products every day to the world. India too has been impacted by this digital revolution where consumption of electronics goods grows at a rapid rate producing a large amount of waste electrical and electronic equipment. This substantial generation of electronic waste referred to as e-waste accompanied with the lack of stringent environmental laws and regulations for handling the hazardous e-waste has resulted in the cropping of number of informal sectors. Over 95% of the e-waste is treated and processed in the majority of urban slums of the country, where untrained workers carry out the dangerous procedures without personal protective equipment, which are detrimental not only to their health but also to the environment. This paper focuses on the occupational health hazards due to the informal recycling of e-waste and then proceeds to show the safe disposal methods for handling the large quantities of e-waste generated in this electronic era and thus finds a sustainable solution for the formal processing of e-waste. PMID:26023273

Approach to design space from retrospective quality data.

PubMed

Puñal Peces, Daniel; García-Montoya, Encarna; Manich, Albert; Suñé-Negre, Josep Maria; Pérez-Lozano, Pilar; Miñarro, Montse; Ticó, Josep Ramon

2016-01-01

Nowadays, the entire manufacturing process is based on the current GMPs, which emphasize the reproducibility of the process, and companies have a lot of recorded data about their processes. The establishment of the design space (DS) from retrospective data for a wet compression process. A design of experiments (DoE) with historical data from 4 years of industrial production has been carried out using the experimental factors as the results of the previous risk analysis and eight key parameters (quality specifications) that encompassed process and quality control data. Software Statgraphics 5.0 was applied, and data were processed to obtain eight DS as well as their safe and working ranges. Experience shows that it is possible to determine DS retrospectively, being the greatest difficulty in handling and processing of high amounts of data; however, the practicality of this study is very interesting as it let have the DS with minimal investment in experiments since actual production batch data are processed statistically.

Safe Handling of Snakes in an ED Setting.

PubMed

Cockrell, Melanie; Swanson, Kristofer; Sanders, April; Prater, Samuel; von Wenckstern, Toni; Mick, JoAnn

2017-01-01

Efforts to improve consistency in management of snakes and venomous snake bites in the emergency department (ED) can improve patient and staff safety and outcomes, as well as improve surveillance data accuracy. The emergency department at a large academic medical center identified an opportunity to implement a standardized process for snake disposal and identification to reduce staff risk exposure to snake venom from snakes patients brought with them to the ED. A local snake consultation vendor and zoo Herpetologist assisted with development of a process for snake identification and disposal. All snakes have been identified and securely disposed of using the newly implemented process and no safety incidents have been reported. Other emergency department settings may consider developing a standardized process for snake disposal using listed specialized consultants combined with local resources and suppliers to promote employee and patient safety. Copyright © 2017 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Taming tosyl azide: the development of a scalable continuous diazo transfer process.

PubMed

Deadman, Benjamin J; O'Mahony, Rosella M; Lynch, Denis; Crowley, Daniel C; Collins, Stuart G; Maguire, Anita R

2016-04-07

Heat and shock sensitive tosyl azide was generated and used on demand in a telescoped diazo transfer process. Small quantities of tosyl azide were accessed in a 'one pot' batch procedure using shelf stable, readily available reagents. For large scale diazo transfer reactions tosyl azide was generated and used in a telescoped flow process, to mitigate the risks associated with handling potentially explosive reagents on scale. The in situ formed tosyl azide was used to rapidly perform diazo transfer to a range of acceptors, including β-ketoesters, β-ketoamides, malonate esters and β-ketosulfones. An effective in-line quench of sulfonyl azides was also developed, whereby a sacrificial acceptor molecule ensured complete consumption of any residual hazardous diazo transfer reagent. The telescoped diazo transfer process with in-line quenching was used to safely prepare over 21 g of an α-diazocarbonyl in >98% purity without any column chromatography.

Safe gas handling and system design for the large scale production of amorphous silicon based solar cells

NASA Astrophysics Data System (ADS)

Fortmann, C. M.; Farley, M. V.; Smoot, M. A.; Fieselmann, B. F.

1988-07-01

Solarex is one of the leaders in amorphous silicon based photovoltaic production and research. The large scale production environment presents unique safety concerns related to the quantity of dangerous materials as well as the number of personnel handling these materials. The safety measures explored by this work include gas detection systems, training, and failure resistant gas handling systems. Our experiences with flow restricting orifices in the CGA connections and the use of steel cylinders is reviewed. The hazards and efficiency of wet scrubbers for silane exhausts are examined. We have found it to be useful to provide the scrubbler with temperature alarms.

46 CFR 154.1200 - Mechanical ventilation system: General.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Each cargo compressor room, pump room, gas-dangerous cargo control station, and space that contains... motors for cargo handling equipment. (2) Each gas-safe cargo control station in the cargo area. (3) Each...

46 CFR 154.1200 - Mechanical ventilation system: General.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Each cargo compressor room, pump room, gas-dangerous cargo control station, and space that contains... motors for cargo handling equipment. (2) Each gas-safe cargo control station in the cargo area. (3) Each...

46 CFR 154.1200 - Mechanical ventilation system: General.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Each cargo compressor room, pump room, gas-dangerous cargo control station, and space that contains... motors for cargo handling equipment. (2) Each gas-safe cargo control station in the cargo area. (3) Each...

Living with vision loss

MedlinePlus

... a white plate will stand out against a dark blue or dark green place mat. Handle Medicines Safely You should: ... to the principles of the Health on the Net Foundation (www.hon.ch). The information provided herein ...

76 FR 64074 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

.... See SUPPLEMENTARY INFORMATION for further details. FOR FURTHER INFORMATION CONTACT: Richard A. Pearson of the Highly Migratory Species Management Division at (727) 824-5399. SUPPLEMENTARY INFORMATION...

Methyl Bromide and Chloropicrin Safety Information for Handlers

EPA Pesticide Factsheets

Labels for these kind of pesticides require that soil fumigant handlers receive safe handling training before participating in field fumigation, according to the Worker Protection Standard (WPS) and Good Agricultural Practices (GAPs).

Citizen's Guide to Pest Control and Pesticide Safety

EPA Pesticide Factsheets

Teaches consumers how to control pests, choose, use, store, and dispose pesticides safely, reduce exposure when others use pesticides, prevent pesticide poisoning, handle an emergency, and how to choose a pest control company.

Beryllium Science: US-UK agreement on the use of Atomic Energy for mutual defense

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanafee, J.E.

1988-02-19

Twenty-seven papers are presented on beryllium supply, production, fabrication, safe handling, analysis, powder technology, and coatings. Separate abstracts have been prepared for the individual papers. (DLC)

Midas® Fumigant Safe Handling Guide

EPA Pesticide Factsheets

Handlers or applicators should wear personal protective equipment including respirator and chemical-resistant gloves when working with this soil fumigant, be trained according to the Worker Protection Standard (WPS), and know signs of pesticide exposure.

Predicting intentions to adopt safe home food handling practices. Applying the theory of planned behavior.

PubMed

Shapiro, Michael A; Porticella, Norman; Jiang, L Crystal; Gravani, Robert B

2011-02-01

While most home cooks know about safe home food handling procedures, compliance is generally low and has not been much improved by campaigns. Foodborne disease is a common cause of illness, hospitalization and even death, and many of these illnesses are caused by unsafe home food practices. Using the theory of planned behavior as a model, survey data were analyzed. Perceived behavioral control was the strongest predictor of behavioral intentions for both hand washing and food thermometer use. Subjective norm was the next strongest predictor for thermometer use, while attitude towards the behavior was the next strongest predictor for hand washing. This is consistent with earlier focus group results for thermometer use and suggests some possible strategies for designing future home food safety messages. Copyright © 2010 Elsevier Ltd. All rights reserved.

Templates of patient brochures for the preparation, administration and safe-handling of oral chemotherapy.

PubMed

Siden, Rivka; Kem, Ravie; Ostrenga, Andrew; Nicksy, Darcy; Bernhardt, Brooke; Bartholomew, Joy

2014-06-01

The increased use of oral chemotherapy for the treatment of cancer introduces new challenges for patients and caregivers. Among them are the ability to swallow oral solid dosage forms, the proper administration of the agents and the safe-handling of chemotherapeutic drugs in the home. Since these drugs are hazardous, proper preparation, administration, and disposition introduces a variety of safety issues. The increased toxicity of these drugs coupled with complicated dosing regimens and the occasional need to dilute the drug or measure a liquid dosage form require careful instruction of the patient and/or caregivers. The purpose of this project was to create templates for writing patient instruction brochures. A group of clinicians specializing in oncology from several institutions in the United States and Canada met through a series of conference calls. The group included pharmacists with a specialty in pediatric oncology, investigational drug pharmacists, and an oncology nurse practitioner. National guidelines and practices at each institution were used for the creation of templates to be used in developing templates for medication and formulation-specific instruction brochures. The group developed six templates. The templates ranged in scope from instructions on the administration of intact tablets or capsules to directions on opening capsules or crushing tablets and mixing the content with foods or liquids. Thirty-three drug-specific brochures were developed using the templates. Templates of patient brochures and drug-specific brochures on the safe handling of chemotherapy in the home can be created using a collaborative, multi-institutional approach.

Qualification Standards for Personnel Responsible for Hazardous or Noxious Chemicals in Bulk. Volume I.

DTIC Science & Technology

1976-05-01

relate to qualifications and training of chemical handling personnel aboard tank - ships and tank barges for two cargo containment systems (i.e., ambient...Transportation b)j •Water; Human Factors; Functional Job ‘Analysis; Tank Ship; Tank Barge; Chemical Tankerman, Educational Cur- .riculum~ Personnel...for safe handling of hazard- ous chemicals transported In bulk by tankshlps and tank barges. One of the resul ts of this study is a data bank of tasks

Crewed Space Vehicle Battery Safety Requirements Revision D

NASA Technical Reports Server (NTRS)

Russell, Samuel

2017-01-01

The Crewed Space Vehicle Battery Safety Requirements document has been prepared for use by designers of battery-powered vehicles, portable equipment, and experiments intended for crewed spaceflight. The purpose of the requirements document is to provide battery designers with information on design provisions to be incorporated in and around the battery and on the verification to be undertaken to demonstrate a safe battery is provided. The term "safe battery" means that the battery is safe for ground personnel and crew members to handle and use; safe to be used in the enclosed environment of a crewed space vehicle; and safe to be mounted or used in unpressurized spaces adjacent to habitable areas. Battery design review, approval, and certification is required before the batteries can be used for ground operations and be certified for flight.

Development and evaluation of online video teaching resources to enhance student knowledge of livestock handling.

PubMed

Klupiec, C; Pope, S; Taylor, R; Carroll, D; Ward, M H; Celi, P

2014-07-01

To evaluate the effectiveness of online audiovisual materials to support the acquisition of animal handling skills by students of veterinary and animal science. A series of video clips (Livestock Handling modules) demonstrating livestock handling procedures was created and delivered online to students enrolled in the Faculty of Veterinary Science, University of Sydney. The effectiveness of these modules for supporting student learning was evaluated via an online survey. The survey also sought feedback on how students could be better prepared for handling livestock. The survey indicated that students found the videos a useful part of their learning experience, particularly by familiarising them with correct handling procedures and emphasising the importance of safety when handling livestock. Students also highlighted that online delivery supported flexible learning. Suggested improvements of the Livestock Handling modules centred around broadening the content of the videos and improving the user-friendliness of online access. Student feedback regarding how the Faculty could better prepare them for livestock handling was dominated by requests for more opportunities to practise animal handling using live animals. The Livestock Handling audiovisual tool is a valuable supplementary resource for developing students' proficiency in safe and effective handling of livestock. However, the results also clearly reveal a perception by students that more hands-on experience is required for acquisition of animal handling skills. These findings will inform future development of the Faculty's animal handling program. © 2014 Australian Veterinary Association.

40 CFR 180.539 - d-Limonene; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... used in insect-repellent tablecloths and in insect-repellent strips used in food- or feed-handling establishments. (2) To assure safe use of the insect repellent, its label and labeling shall conform to that...

Selecting Safe Pets (For Parents)

MedlinePlus

... kids to wash their hands with soap and water after handling pets. Don't keep undomesticated animals as house pets. Pet ownership has many benefits, and doing a little research before taking the plunge will help make your ...

1,3-Dichloropropene and Chloropicrin Combination Products Fumigant Safe Handling Guide

EPA Pesticide Factsheets

These soil fumigant pesticide products' labels require safety training according to the Worker Protection Standard WPS. Steps to mitigate exposure include air monitoring, respiratory protection, and proper tarp perforation and removal.

40 CFR 180.539 - d-Limonene; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... used in insect-repellent tablecloths and in insect-repellent strips used in food- or feed-handling establishments. (2) To assure safe use of the insect repellent, its label and labeling shall conform to that...

40 CFR 180.539 - d-Limonene; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

... used in insect-repellent tablecloths and in insect-repellent strips used in food- or feed-handling establishments. (2) To assure safe use of the insect repellent, its label and labeling shall conform to that...

40 CFR 180.539 - d-Limonene; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... used in insect-repellent tablecloths and in insect-repellent strips used in food- or feed-handling establishments. (2) To assure safe use of the insect repellent, its label and labeling shall conform to that...

40 CFR 180.539 - d-Limonene; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... used in insect-repellent tablecloths and in insect-repellent strips used in food- or feed-handling establishments. (2) To assure safe use of the insect repellent, its label and labeling shall conform to that...

Paladin® EC (Dimethyl Disulfide, DMDS) Fumigant Safe Handling Guide

EPA Pesticide Factsheets

Certified pesticide applicators are required to provide safety information to handlers working in an application block or buffer zone, including instruction on personal protective equipment, air monitoring, respiratory protection, and exposure mitigation.

EGD discharge

MedlinePlus

... It is not safe to drive or handle tools or equipment. You should also avoid making important work or legal decisions for the rest of the day, even if you believe your thinking is clear. Keep an eye on the site ...

A pilot survey of the U.S. medical waste industry to determine training needs for safely handling highly infectious waste.

PubMed

Le, Aurora B; Hoboy, Selin; Germain, Anne; Miller, Hal; Thompson, Richard; Herstein, Jocelyn J; Jelden, Katelyn C; Beam, Elizabeth L; Gibbs, Shawn G; Lowe, John J

2018-02-01

The recent Ebola outbreak led to the development of Ebola virus disease (EVD) best practices in clinical settings. However, after the care of EVD patients, proper medical waste management and disposal was identified as a crucial component to containing the virus. Category A waste-contaminated with EVD and other highly infectious pathogens-is strictly regulated by governmental agencies, and led to only several facilities willing to accept the waste. A pilot survey was administered to determine if U.S. medical waste facilities are prepared to handle or transport category A waste, and to determine waste workers' current extent of training to handle highly infectious waste. Sixty-eight percent of survey respondents indicated they had not determined if their facility would accept category A waste. Of those that had acquired a special permit, 67% had yet to modify their permit since the EVD outbreak. This pilot survey underscores gaps in the medical waste industry to handle and respond to category A waste. Furthermore, this study affirms reports a limited number of processing facilities are capable or willing to accept category A waste. Developing the proper management of infectious disease materials is essential to close the gaps identified so that states and governmental entities can act accordingly based on the regulations and guidance developed, and to ensure public safety. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Revised Extended Grid Library

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martz, Roger L.

The Revised Eolus Grid Library (REGL) is a mesh-tracking library that was developed for use with the MCNP6TM computer code so that (radiation) particles can track on an unstructured mesh. The unstructured mesh is a finite element representation of any geometric solid model created with a state-of-the-art CAE/CAD tool. The mesh-tracking library is written using modern Fortran and programming standards; the library is Fortran 2003 compliant. The library was created with a defined application programmer interface (API) so that it could easily integrate with other particle tracking/transport codes. The library does not handle parallel processing via the message passing interfacemore » (mpi), but has been used successfully where the host code handles the mpi calls. The library is thread-safe and supports the OpenMP paradigm. As a library, all features are available through the API and overall a tight coupling between it and the host code is required. Features of the library are summarized with the following list: Can accommodate first and second order 4, 5, and 6-sided polyhedra; any combination of element types may appear in a single geometry model; parts may not contain tetrahedra mixed with other element types; pentahedra and hexahedra can be together in the same part; robust handling of overlaps and gaps; tracks element-to-element to produce path length results at the element level; finds element numbers for a given mesh location; finds intersection points on element faces for the particle tracks; produce a data file for post processing results analysis; reads Abaqus .inp input (ASCII) files to obtain information for the global mesh-model; supports parallel input processing via mpi; and support parallel particle transport by both mpi and OpenMP.« less

Improvement of tritium accountancy technology for ITER fuel cycle safety enhancement

NASA Astrophysics Data System (ADS)

O'hira, S.; Hayashi, T.; Nakamura, H.; Kobayashi, K.; Tadokoro, T.; Nakamura, H.; Itoh, T.; Yamanishi, T.; Kawamura, Y.; Iwai, Y.; Arita, T.; Maruyama, T.; Kakuta, T.; Konishi, S.; Enoeda, M.; Yamada, M.; Suzuki, T.; Nishi, M.; Nagashima, T.; Ohta, M.

2000-03-01

In order to improve the safe handling and control of tritium for the ITER fuel cycle, effective in situ tritium accounting methods have been developed at the Tritium Process Laboratory in the Japan Atomic Energy Research Institute under one of the ITER-EDA R&D tasks. The remote and multilocation analysis of process gases by an application of laser Raman spectroscopy developed and tested could provide a measurement of hydrogen isotope gases with a detection limit of 0.3 kPa analytical periods of 120 s. An in situ tritium inventory measurement by application of a `self-assaying' storage bed with 25 g tritium capacity could provide a measurement with the required detection limit of less than 1% and a design proof of a bed with 100 g tritium capacity.

[Prevention of medication errors in healthcare transition of patients treated with apomorphine].

PubMed

Ucha Sanmartin, M; Martín Vila, A; López Vidal, C; Caaamaño Barreiro, M; Piñeiro Corrales, G

2014-05-01

The transition of patients between different levels of care process is a particular risk in the production of medication errors. The aim of this paper is to analyze the role of the pharmacist in preventing errors transition care to ensure a safe and cross pharmacotherapy of patients.Transversal, observational and descriptive study in a University Hospital that has a pharmacy service that integrates specialized inpatient care and health centers. Transition of care a patient treated with Apormorfina was analyzed to determine the keypoints of action of the pharmacist. Demographics, disease and medication history, and care transition episodes were collected through the pharmacy program and electronics history.The pharmacist did tasks adapting, reconciliation, management and reporting of medication to the health care team to prevent medication errors in care transition of patients treated with drugs requiring special handling .In conclusion, this work represents perfectly the key role of the pharmacist as coordinator of safe and transverse pharmacotherapy of patients. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Microbiology as a High-School Elective

ERIC Educational Resources Information Center

Peterson, Priscilla

1973-01-01

Describes a course in microbiology offered as a high school science elective. The laboratory-oriented course has proved to be very popular and provides students with the basic techniques for handling equipment and working safely with bacteria. (JR)

Tips to Reduce Your Risk of Salmonella from Eggs

MedlinePlus

... What's this? Submit Button Past Emails Salmonella and Eggs Language: English (US) Español (Spanish) Recommend on Facebook ... Dizziness when standing up. Safe Handling Tips for Eggs from Backyard Poultry Shell eggs may become contaminated ...

Gun Safety

MedlinePlus

Many U.S. households have guns, but they can cause harm if not handled properly. Here are some things you can do to keep yourself and ... safe: Teach children that they shouldn't touch guns and that if they see a gun, to ...

Radiation and Shipping Port Security | RadTown USA | US ...

EPA Pesticide Factsheets

2017-08-07

Cargo comes into the U.S. from all over the world. Ports can ensure safety by: Screening cargo for radiation before it gets here. Safely handling any radioactive material that needs to pass through a port.

SAFE HANDLING OF FOODS

EPA Science Inventory

Microbial food-borne illnesses pose a significant health problem in Japan. In 1996 the world's largest outbreak of Escherichia coli food illness occurred in Japan. Since then, new regulatory measures were established, including strict hygiene practices in meat and food processi...

Food hygiene training in small to medium-sized care settings.

PubMed

Seaman, Phillip; Eves, Anita

2008-10-01

Adoption of safe food handling practices is essential to effectively manage food safety. This study explores the impact of basic or foundation level food hygiene training on the attitudes and intentions of food handlers in care settings, using questionnaires based on the Theory of Planned Behaviour. Interviews were also conducted with food handlers and their managers to ascertain beliefs about the efficacy of, perceived barriers to, and relevance of food hygiene training. Most food handlers had undertaken formal food hygiene training; however, many who had not yet received training were preparing food, including high risk foods. Appropriate pre-training support and on-going supervision appeared to be lacking, thus limiting the effectiveness of training. Findings showed Subjective Norm to be the most significant influence on food handlers' intention to perform safe food handling practices, irrespective of training status, emphasising the role of important others in determining desirable behaviours.

Handling qualities related to stall/spin accidents of supersonic fighter aircraft

NASA Technical Reports Server (NTRS)

Anderson, S. B.

1984-01-01

This paper reviews the handling qualities which influence the high angle of attack (AOA) behavior of supersonic fighter aircraft in order to obtain a clearer understanding of the causes of stall/spin accidents. The results show that, because modern fighters suffer more serious consequences when control is lost, good handling qualities are essential for safe operation at high AOA. Relaxed static stability used on some fighter aircraft can result in control problems at high AOA owing to inertia coupling and the difficulty of a recovery from a deep stall. Indications are that the use of departure/spin resistance and an automatic spin prevention system will greatly improve the safety record for modern supersonic fighters.

Effects of Variety and Postharvest Handling Practices on Microbial Population at Different Stages of the Value Chain of Fresh Tomato (Solanum lycopersicum) in Western Terai of Nepal.

PubMed

Khadka, Ram B; Marasini, Madan; Rawal, Ranjana; Gautam, Durga M; Acedo, Antonio L

2017-01-01

Background . Fresh vegetables such as tomato should have low microbial population for safe consumption and long storage life. The aerobic bacterial count (ABC) and coliform bacterial count (CBC), yeast, and mold population are the most widely used microbial indicators in fresh vegetables which should be lower than 4 log CFU g -1 for safe consumption. The stages of the supply chain, postharvest handling methods, and crop varieties had significant effects on microbial population. ABC, CBC, yeast, and mold population were significantly highest ( P < 0.05) at retail market (5.59, 4.38, 2.60, and 3.14 log CFU g -1 , resp.), followed by wholesale market (4.72, 4.71, 2.43, and 2.44 log CFU g -1 , resp.), and were least at farm gate (3.89, 3.63, 2.38, and 2.03 log CFU g -1 , resp.). Improved postharvest practices (washing in clean water and grading and packaging in clean plastic crate) helped to reduce ABC, CBC, and mold population by 2.51, 32.70, and 29.86 percentage as compared to the conventional method (no washing and no grading and packaging in mud plastered bamboo baskets). Among varieties, Pusa ruby had the lowest microbial load of 2.58, 4.53, 0.96, and 1.77 log CFU g -1 for ABC, CBC, yeast, and mold count, respectively. Significantly negative correlation ( P < 0.05) was observed between fruit pH & ABC and pH & mold count. Although the microbial quality of fresh tomato is safe in the local market of western Terai of Nepal both in conventional and in improved practices however still it is essential to follow improved postharvest handling practices in production and marketing of newly introduced tomato cultivars (high-pH cultivars) for ensuring the safe availability of fresh tomato in the market.

Effects of Variety and Postharvest Handling Practices on Microbial Population at Different Stages of the Value Chain of Fresh Tomato (Solanum lycopersicum) in Western Terai of Nepal

PubMed Central

Marasini, Madan; Rawal, Ranjana; Gautam, Durga M.; Acedo, Antonio L.

2017-01-01

Background. Fresh vegetables such as tomato should have low microbial population for safe consumption and long storage life. The aerobic bacterial count (ABC) and coliform bacterial count (CBC), yeast, and mold population are the most widely used microbial indicators in fresh vegetables which should be lower than 4 log CFU g−1 for safe consumption. The stages of the supply chain, postharvest handling methods, and crop varieties had significant effects on microbial population. ABC, CBC, yeast, and mold population were significantly highest (P < 0.05) at retail market (5.59, 4.38, 2.60, and 3.14 log CFU g−1, resp.), followed by wholesale market (4.72, 4.71, 2.43, and 2.44 log CFU g−1, resp.), and were least at farm gate (3.89, 3.63, 2.38, and 2.03 log CFU g−1, resp.). Improved postharvest practices (washing in clean water and grading and packaging in clean plastic crate) helped to reduce ABC, CBC, and mold population by 2.51, 32.70, and 29.86 percentage as compared to the conventional method (no washing and no grading and packaging in mud plastered bamboo baskets). Among varieties, Pusa ruby had the lowest microbial load of 2.58, 4.53, 0.96, and 1.77 log CFU g−1 for ABC, CBC, yeast, and mold count, respectively. Significantly negative correlation (P < 0.05) was observed between fruit pH & ABC and pH & mold count. Although the microbial quality of fresh tomato is safe in the local market of western Terai of Nepal both in conventional and in improved practices however still it is essential to follow improved postharvest handling practices in production and marketing of newly introduced tomato cultivars (high-pH cultivars) for ensuring the safe availability of fresh tomato in the market. PMID:29124068

Chemotherapy drug handling in first opinion small animal veterinary practices in the United Kingdom: results of a questionnaire survey.

PubMed

Edery, E G

2017-05-27

To investigate how first opinion small animal veterinary surgeons in the UK handled chemotherapeutic agents, a questionnaire was distributed at the 2014 British Small Animal Veterinary Association congress and by internet. Chemotherapy was regularly offered by 70.4 per cent of the respondents. Gold standards defined according to available guidelines for safe handling of antineoplastic drugs were poorly followed by general practitioners with only 2 per cent of respondents complying with all of them. Dedicated facilities for preparation and administration of cytotoxic drugs were variably available among participants. The level of training of staff indirectly involved in handling chemotherapy was appropriate in less than 50 per cent of practices. No association was found between demographic characteristics of the sampled population and the decision to perform chemotherapy. The results of this study raise concerns about the safety of the veterinary staff in first opinion practices involved in handling chemotherapy. British Veterinary Association.

Safe handling practices of cytotoxic drugs: the results of a chapter survey.

PubMed

Mahon, S M; Casperson, D S; Yackzan, S; Goodner, S; Hasse, B; Hawkins, J; Parham, J; Rimkus, C; Schlomer, M; Witcher, V

1994-08-01

To describe how nurses from a local Oncology Nursing Society (ONS) Chapter Implement Occupational Safety and Health Administration (OSHA) guidelines for handling cytotoxic drugs (CDs) in their individual practices and to identify barriers to implementing these guidelines. Mailed survey. ONS chapter in a large midwestern city. 103 nurses, 83 of whom handle CDs. Mean years in oncology nursing was 7.5. Mailed survey consisting of 48 questions on seven topics, as well as demographic questions. Roles in preparation and administration of CDs, management spills, patient care, and use of protective equipment in patient and family education practices; barriers to use of protective practices. Subjects used some protective equipment when preparing and administering CDs, but the type of equipment and its frequency of use did not specifically meet OSHA Guidelines. Rates of compliance with guidelines were better for management of spills and disposal of equipment. Verbal instructions for patients and families were employed but very few provided written instructions or explanations. Barriers to using protective equipment included a lack of time, problems with availability, and concerns about patient reactions. Barriers must be overcome and better safe-handling practices incorporated into practice to ensure the safety of nurses. More education is needed for family members who come into contact with patients receiving CDs. Future research to document the extent of the problem, including stratification of responses according to the quantity and frequency with which a nurse administers CDs. Better, and perhaps more frequent, staff and family education efforts are needed.

Impact of a Safe Resident Handling Program in Nursing Homes on Return-to-Work and Re-injury Outcomes Following Work Injury.

PubMed

Kurowski, Alicia; Pransky, Glenn; Punnett, Laura

2018-05-21

Purpose This study examined the impact of a Safe Resident Handling Program (SRHP) on length of disability and re-injury, following work-related injuries of nursing home workers. Resident handling-related injuries and back injuries were of particular interest. Methods A large national nursing home corporation introduced a SRHP followed by three years of training for 136 centers. Lost-time workers' compensation claims (3 years pre-SRHP and 6 years post-SRHP) were evaluated. For each claim, length of first episode of disability and recurrence of disabling injury were evaluated over time. Differences were assessed using Chi square analyses and a generalized linear model, and "avoided" costs were projected. Results The SRHP had no impact on length of disability, but did appear to significantly reduce the rate of recurrence among resident handling-related injuries. As indemnity and medical costs were three times higher for claimants with recurrent disabling injuries, the SRHP resulted in significant "avoided" costs due to "avoided" recurrence. Conclusions In addition to reducing overall injury rates, SRHPs appear to improve long-term return-to-work success by reducing the rate of recurrent disabling injuries resulting in work disability. In this study, the impact was sustained over years, even after a formal training and implementation program ended. Since back pain is inherently a recurrent condition, results suggest that SRHPs help workers remain at work and return-to-work.

Compilation of Requirements for Safe Handling of Fluorine and Fluorine-Containing Products of Uranium Hexafluoride Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferrada, J.J.

2000-04-03

Public Law (PL) 105-204 requires the U.S. Department of Energy to develop a plan for inclusion in the fiscal year 2000 budget for conversion of the Department's stockpile of depleted uranium hexafluoride (DUF{sub 6}) to a more stable form over an extended period. The conversion process into a more stable form will produce fluorine compounds (e.g., elemental fluorine or hydrofluoric acid) that need to be handled safely. This document compiles the requirements necessary to handle these materials within health and safety standards, which may apply in order to ensure protection of the environment and the safety and health of workersmore » and the public. Fluorine is a pale-yellow gas with a pungent, irritating odor. It is the most reactive nonmetal and will react vigorously with most oxidizable substances at room temperature, frequently with ignition. Fluorine is a severe irritant of the eyes, mucous membranes, skin, and lungs. In humans, the inhalation of high concentrations causes laryngeal spasm and broncospasms, followed by the delayed onset of pulmonary edema. At sublethal levels, severe local irritation and laryngeal spasm will preclude voluntary exposure to high concentrations, unless the individual is trapped or incapacitated. A blast of fluorine gas on the shaved skin of a rabbit causes a second degree burn. Lower concentrations cause severe burns of insidious onset, resulting in ulceration, similar to the effects produced by hydrogen fluoride. Hydrofluoric acid is a colorless, fuming liquid or gas with a pungent odor. It is soluble in water with release of heat. Ingestion of an estimated 1.5 grams produced sudden death without gross pathological damage. Repeated ingestion of small amounts resulted in moderately advanced hardening of the bones. Contact of skin with anhydrous liquid produces severe burns. Inhalation of AHA or aqueous hydrofluoric acid mist or vapors can cause severe respiratory tract irritation that may be fatal. Based on the extreme chemical properties of these chemicals as noted above, fluorine or fluorine compounds must be handled appropriately within the boundaries of many safety requirements for the protection of the environment and the public. This report analyzes the safety requirements that regulatory agencies have issued to handle fluorine or fluorine compounds and lists them in Table 1. Table 1 lists the source of the requirements, the specific section of the source document, and a brief description of the requirements.« less

Cold Trap Dismantling and Sodium Removal at a Fast Breeder Reactor - 12327

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graf, A.; Petrick, H.; Stutz, U.

2012-07-01

The first German prototype Fast Breeder Nuclear Reactor (KNK) is currently being dismantled after being the only operating Fast Breeder-type reactor in Germany. As this reactor type used sodium as a coolant in its primary and secondary circuit, seven cold traps containing various amounts of partially activated sodium needed to be disposed of as part of the dismantling. The resulting combined difficulties of radioactive contamination and high chemical reactivity were handled by treating the cold traps differently depending on their size and the amount of sodium contained inside. Six small cold traps were processed onsite by cutting them up intomore » small parts using a band saw under a protective atmosphere. The sodium was then converted to sodium hydroxide by using water. The remaining large cold trap could not be handled in the same way due to its dimensions (2.9 m x 1.1 m) and the declared amount of sodium inside (1,700 kg). It was therefore manually dismantled inside a large box filled with a protective atmosphere, while the resulting pieces were packaged for later burning in a special facility. The experiences gained by KNK during this process may be advantageous for future dismantling projects in similar sodium-cooled reactors worldwide. The dismantling of a prototype fast breeder reactor provides the challenge not only to dismantle radioactive materials but also to handle sodium-contaminated or sodium-containing components. The treatment of sodium requires additional equipment and installations to ensure a safe handling. Since it is not permitted to bring sodium into a repository, all sodium has to be neutralized either through a controlled reaction with water or by incinerating. The resulting components can be disposed of as normal radioactive waste with no further conditions. The handling of sodium needs skilled and experienced workers to minimize the inherent risks. And the example of the disposal of the large KNK cold trap shows the interaction with others and also foreign decommissioning projects can provide solutions with were unknown before. (authors)« less

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

[Hazardous materials and work safety in veterinary practice. 1: Hazardous material definition and characterization, practice documentation and general rules for handling].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-04-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material is given and the potential risks are mentioned. The correct documentation regarding the protection of the purchase, storage, working conditions and removal of hazardous material and of the personal is explained. General rules for the handling of hazardous material are described. In part 2, particular emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gas, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references is also given.

Chemical Safety Alert: Safe Storage and Handling of Swimming Pool Chemicals

EPA Pesticide Factsheets

Hazards of pool water treatment and maintenance chemicals (e.g., chlorine), and the protective measures pool owners should take to prevent fires, toxic vapor releases, and injuries. Triggered by improper wetting, mixing, or self-reactivity over time.

THE MID-ATLANTIC INTEGRATED ASSESSMENT (MAIA)

EPA Science Inventory

Since its inception, EPA has focused its research and monitoring towards its regulatory requirements?to protect air and water quality, to control the use of pesticides and toxic substances, to ensure the safe production, handling, and disposal of industrial chemicals, and to clea...

14 CFR 29.1541 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false General. 29.1541 Section 29.1541 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... safe operation of the rotorcraft if it has unusual design, operating or handling characteristics. (b...

Bicycle safety education for children from a developmental and learning perspective.

DOT National Transportation Integrated Search

2014-01-01

When children ride bicycles in and near traffic, they engage in a complicated task of combining motor skills and cognitive skills. In addition to developing bicycle-handling skills, bicycle safety education programs teach children how to ride safely ...

Space Station Freedom Toxic and Reactive Materials Handling

NASA Technical Reports Server (NTRS)

Baugher, Charles R. (Editor)

1990-01-01

Viable research in materials processing in space requires the utilization of a wide variety of chemicals and materials, many of which are considered toxic and/or highly reactive with other substances. A realistic view of the experiments which are most likely to be accomplished in the early Space Station phases are examined and design issues addressed which are related to their safe implementation. Included are discussions of materials research on Skylab, Spacelab, and the Shuttle mid-deck; overviews of early concepts for specialized Space Station systems designed to help contain potential problems; descriptions of industrial experience with ground-based research; and an overview of the state-of-the-art in contamination detection systems.

Verification and Validation of Adaptive and Intelligent Systems with Flight Test Results

NASA Technical Reports Server (NTRS)

Burken, John J.; Larson, Richard R.

2009-01-01

F-15 IFCS project goals are: a) Demonstrate Control Approaches that can Efficiently Optimize Aircraft Performance in both Normal and Failure Conditions [A] & [B] failures. b) Advance Neural Network-Based Flight Control Technology for New Aerospace Systems Designs with a Pilot in the Loop. Gen II objectives include; a) Implement and Fly a Direct Adaptive Neural Network Based Flight Controller; b) Demonstrate the Ability of the System to Adapt to Simulated System Failures: 1) Suppress Transients Associated with Failure; 2) Re-Establish Sufficient Control and Handling of Vehicle for Safe Recovery. c) Provide Flight Experience for Development of Verification and Validation Processes for Flight Critical Neural Network Software.

Can control banding be useful for the safe handling of nanomaterials? A systematic review

NASA Astrophysics Data System (ADS)

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-06-01

Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question "can control banding be useful to ensure adequate controls for the safe handling of nanomaterials." A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included `control,' `hazard,' `exposure,' and `risk' banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended exposure controls using CB to existing exposure controls previously recommended by an industrial hygienist. It was determined that the selection of exposure controls using CB were consistent with those recommended by an industrial hygienist for 19 out of 32 (59.4 %) job activities. A higher level of exposure control was recommended for nine out of 32 (28.1 %) job activities using CB, while four out of 32 (12.5 %) job activities had in-place exposure controls that were more stringent than those recommended using CB. After evaluation using GRADE, evidence indicated that the use of CB Nanotool can recommend exposure controls for many ENM job activities that would be consistent with those recommended by an experienced industrial hygienist. The use of CB for reducing exposures to ENMs has the potential to be an effective risk management strategy when information is limited on the health risk to the nanomaterial and/or there is an absence of an occupational exposure limit. However, there remains a lack of evidence to conclude that the use of CB can provide adequate exposure control in all work environments. Additional validation work is needed to provide more data to support the use of CB for the safe handling of ENMs.

Can Control Banding be Useful for the Safe Handling of Nanomaterials? A Systematic Review

PubMed Central

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-01-01

Objectives Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question “can control banding be useful to ensure adequate controls for the safe handling of nanomaterials.” Methods A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included ‘control’, ‘hazard’, ‘exposure’ and ‘risk’ banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the Methodological Index for Non-Randomized Studies (MINORS). The quality of the evidence was evaluated using Grading of Recommendations Assessment, Development and Evaluation (GRADE). Results A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended exposure controls using CB to existing exposure controls previously recommended by an industrial hygienist. It was determined that the selection of exposure controls using CB were consistent with those recommended by an industrial hygienist for 19 out of 32 (59.4%) job activities. A higher level of exposure control was recommended for nine out of 32 (28.1%) job activities using CB while four out of 32 (12.5%) job activities had in place exposure controls that were more stringent than those recommended using CB. After evaluation using GRADE, evidence indicated that the use of CB Nanotool can recommend exposure controls for many ENM job activities that would be consistent with those recommended by an experienced industrial hygienist. Conclusion The use of CB for reducing exposures to ENMs has the potential to be an effective risk management strategy when information is limited on the health risk to the nanomaterial and/or there is an absence of an occupational exposure limit (OEL). However, there remains a lack of evidence to conclude that the use of CB can provide adequate exposure control in all work environments. Additional validation work is needed to provide more data to support the use of CB for the safe handling of ENMs. PMID:27471426

Diazo compounds in continuous-flow technology.

PubMed

Müller, Simon T R; Wirth, Thomas

2015-01-01

Diazo compounds are very versatile reagents in organic chemistry and meet the challenge of selective assembly of structurally complex molecules. Their leaving group is dinitrogen; therefore, they are very clean and atom-efficient reagents. However, diazo compounds are potentially explosive and extremely difficult to handle on an industrial scale. In this review, it is discussed how continuous flow technology can help to make these powerful reagents accessible on large scale. Microstructured devices can improve heat transfer greatly and help with the handling of dangerous reagents safely. The in situ formation and subsequent consumption of diazo compounds are discussed along with advances in handling diazomethane and ethyl diazoacetate. The potential large-scale applications of a given methodology is emphasized. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bates, T.R. Jr.; Tait, S.; Mumford, G.

The authors discuss how improvements that can increase rig safety can be made in equipment, regulations, and stabilized personnel levels. With regard to equipment, exposure to material handling must be reduced through automation, and well-control technology must be improved by enhanced use of computers and better systems to handle gas. According to this analysis, regulations are needed that are global in scope and have had their costs-to-benefits fully and fairly assessed. Self regulation must be used effectively throughout the industry. Job security and wages should be made adequate to maintain an experienced, motivated, and safe work force.

Performance enhancement of various real-time image processing techniques via speculative execution

NASA Astrophysics Data System (ADS)

Younis, Mohamed F.; Sinha, Purnendu; Marlowe, Thomas J.; Stoyenko, Alexander D.

1996-03-01

In real-time image processing, an application must satisfy a set of timing constraints while ensuring the semantic correctness of the system. Because of the natural structure of digital data, pure data and task parallelism have been used extensively in real-time image processing to accelerate the handling time of image data. These types of parallelism are based on splitting the execution load performed by a single processor across multiple nodes. However, execution of all parallel threads is mandatory for correctness of the algorithm. On the other hand, speculative execution is an optimistic execution of part(s) of the program based on assumptions on program control flow or variable values. Rollback may be required if the assumptions turn out to be invalid. Speculative execution can enhance average, and sometimes worst-case, execution time. In this paper, we target various image processing techniques to investigate applicability of speculative execution. We identify opportunities for safe and profitable speculative execution in image compression, edge detection, morphological filters, and blob recognition.

An Economic Analysis of a Safe Resident Handling Program in Nursing Homes

PubMed Central

Lahiri, Supriya; Latif, Saira; Punnett, Laura

2018-01-01

Background Occupational injuries, especially back problems related to resident handling, are common in nursing home employees and their prevention may require substantial up-front investment. This study evaluated the economics of a safe resident handling program (SRHP), in a large chain of skilled nursing facilities, from the corporation's perspective. Methods The company provided data on program costs, compensation claims, and turnover rates (2003-2009). Workers' compensation and turnover costs before and after the intervention were compared against investment costs using the “net-cost model”. Results Among 110 centers, the overall benefit-to-cost ratio was 1.7–3.09 and the payback period was 1.98–1.06 year (using alternative turnover cost estimates). The average annualized net savings per bed for the 110 centers (using company based turnover cost estimates) was $143, with a 95% confidence interval of $22–$264. This was very similar to the average annualized net savings per full time equivalent (FTE) staff member, which was $165 (95% confidence interval $22–$308). However, at 49 centers costs exceeded benefits. Conclusions Decreased costs of worker injury compensation claims and turnover appear at least partially attributable to the SRHP. Future research should examine center-specific factors that enhance program success, and improve measures of turnover costs and healthcare productivity. PMID:23203729

An economic analysis of a safe resident handling program in nursing homes.

PubMed

Lahiri, Supriya; Latif, Saira; Punnett, Laura

2013-04-01

Occupational injuries, especially back problems related to resident handling, are common in nursing home employees and their prevention may require substantial up-front investment. This study evaluated the economics of a safe resident handling program (SRHP), in a large chain of skilled nursing facilities, from the corporation's perspective. The company provided data on program costs, compensation claims, and turnover rates (2003-2009). Workers' compensation and turnover costs before and after the intervention were compared against investment costs using the "net-cost model." Among 110 centers, the overall benefit-to-cost ratio was 1.7-3.09 and the payback period was 1.98-1.06 year (using alternative turnover cost estimates). The average annualized net savings per bed for the 110 centers (using company based turnover cost estimates) was $143, with a 95% confidence interval of $22-$264. This was very similar to the average annualized net savings per full time equivalent (FTE) staff member, which was $165 (95% confidence interval $22-$308). However, at 49 centers costs exceeded benefits. Decreased costs of worker injury compensation claims and turnover appear at least partially attributable to the SRHP. Future research should examine center-specific factors that enhance program success, and improve measures of turnover costs and healthcare productivity. Copyright © 2012 Wiley Periodicals, Inc.

Nitrogen Trifluoride: Its Chemistry, Toxicity, and Safe Handling.

DTIC Science & Technology

1976-11-12

Hopkins University . LPAI—LtIP-1 , Nov 1961 . 27. Stauffer Chemical Co. Technical Bulletin. “Nitrogen Trifluoride and Tetrafluorohydrazine ” . Market ...Continued ) United Technologies Corp. Naval Postgraduate School Pratt & Whitney Aircraft Div. Attn: Libra ry, Tech. Repts. Florida Researc h & Development Ctr

42 CFR 65.1 - To what projects do these regulations apply?

Code of Federal Regulations, 2010 CFR

2010-10-01

..., INTERNSHIPS, TRAINING NATIONAL INSTITUTE OF ENVIRONMENTAL HEALTH SCIENCES HAZARDOUS WASTE WORKER TRAINING § 65... for the purpose of providing training and education to hazardous materials employees regarding: the safe unloading, loading, handling, storage, and transportation of hazardous materials; and, emergency...

Slosh characteristics of aggregated intermediate bulk containers on single-unit trucks.

DOT National Transportation Integrated Search

2016-08-01

Drivers of cargo tank trucks need special knowledge of vehicle and load dynamics, including slosh, to handle their vehicles safely. This knowledge is reflected by a tank vehicle (N) endorsement to the commercial drivers license (CDL). Drivers of v...

Microbiology--Safety Considerations.

ERIC Educational Resources Information Center

Hoffmann, Sheryl K.

This paper discusses the risk assessment associated with microbiology instruction based on grade level, general control measures, appropriate activities for middle school and high school students, the preparation and sterilization of equipment, and safe handling techniques. Appended are instructions and figures on making wire loops and the…

40 CFR 180.442 - Bifenthrin; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... application of bifenthrin in food handling establishments, including food service, manufacturing and... ingredient. Contamination of food/feed or food/feed contact surfaces shall be avoided. (B) To assure safe use...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

Chemistry laboratory safety manual available

NASA Technical Reports Server (NTRS)

Elsbrock, R. G.

1968-01-01

Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

Technical considerations in the preparation and dispensing of chemotherapy.

PubMed

Peters, B G

1995-01-01

The safe handling of cytotoxic agents is intimately related to the technical aspects of drug preparation, dispensing, and administration. The appropriate equipment, supplies, protective clothing, and waste disposal systems must be available to the health care worker who is called upon to prepare cytotoxic agents. In addition, the health care worker must be adequately trained in and familiar with the safe use of these products and equipment and the preparation techniques or manipulations necessary during cytotoxic drug compounding. The article describes in detail and reviews the technical considerations, such as aseptic technique, proper use of the biological safety cabinet, gowning and gloving, labeling, and waste disposal, that are essential to the safe preparation and dispensing of chemotherapy.

ES-doc-errata: an issue tracker platform for CMIP6

NASA Astrophysics Data System (ADS)

Ben Nasser, Atef; Levavasseur, Guillaume; Greenslade, Mark; Denvil, Sébastien

2017-04-01

In the context of overseeing the quality of data, and as a result of the inherent complexity of projects such as CMIP5/6, it is a mandatory task to keep track of the status of datasets and the version evolution they sustain in their life-cycle. The ESdoc-errata project aims to keep track of the issues affecting specific versions of datasets/files. It enables users to resolve the history tree of each dataset/file enabling a better choice of the data used in their work based on the data status. The ES-doc-errata project has been designed and built on top of the Parent-IDentifiers handle service that will be deployed in the next iteration of the CMIP project, by ensuring maximum usability of ESGF ecosystem and encapsulated in the ES-doc structure. Consuming PIDs from handle service is guided by a specifically built algorithm that extracts meta-data regarding the issues that may or may not affect the quality of datasets/files and cause newer version to be published replacing older deprecated versions. This algorithm is able to deduce the nature of the flaws to the file granularity, that is of high value to the end-user. This new platform has been designed keeping in mind usability by end-users specialized in the data publishing process or other scientists requiring feedback on reliability of data required for their work. To this end, a specific set of rules and a code of conduct has been defined. A validation process ensures the quality of this newly introduced errata meta-data , an authentication safe-guard was implemented to prevent tampering with the archived data, and a wide variety of tools were put at users disposal to interact safely with the platform including a command-line client and a dedicated front-end.

Survey of responsible handling of local anesthetic in Indian dental operatory

PubMed Central

Rooban, Thavarajah; Rao, Umadevi Krishnamohan; Joshua, Elizabeth; Ranganathan, Kannan

2013-01-01

Background: Dental operatory requires handling of numerous toxic fluids such as denture acrylic monomer, alcohol and formalin for effective oral care delivery. The efficacy and responsible handling of such fluids has not been analyzed among Indian dentists and this study aims to address this lacunae. Materials and Methods: Closed ended questionnaire was distributed through email to Indian dentists in July 2012. After inclusion/exclusion criteria, 1484 practitioners constituted the study group with a response rate of 52%. Statistics: SPSS® Version 17.0 (SPSS-IBM Inc., IL, USA) was used to carry out statistical analysis. Descriptive statistics were presented. Chi square test was used to identify the association between the parameters; P ≤ 0.05 was considered as statistically significant. Results: Males (80.8%), undergraduates (78%), exclusive practitioners (81.2%), urban practitioners (68.5%) were the predominant respondents. Predominant of the respondents (97%) used local anesthetic (LA) from bottles. Eight percent have encountered instances of injecting formalin instead of LA in their settings. Safe disposal rules and regulations (P ≤ 0.05), opinion on injecting the other fluids instead of LA as a severe negligent act (P ≤ 0.05) were statistically significant between age groups. Educational status did not appear to influence the outcome. Only a third of the respondents were aware of the rules and regulations for safe disposal of empty LA bottles while 49.1% were not aware of them and willing to learn. Discussion: The lacunae in responsible handling of toxic fluids need to be addressed to prevent inadvertent and negligence suits against dentists, highlighting the need through continuing dental education programmes. PMID:24255564

TECHNICAL GUIDANCE DOCUMENT: INSPECTION TECHNIQUES FOR THE FABRICATION OF GEOMEMBRANE FIELD SEAMS

EPA Science Inventory

Subtitle C of the Resource Conservation and Recovery Act (RCRA) requires the U.S. Environmental Protection Agency (EPA) to establish a Federal hazardous waste management program. This program must ensure that hazardous wastes are handled safely from generation until final dispos...

Safe and Sanitary.

ERIC Educational Resources Information Center

Turner, Ed; Hauser, Dan

1994-01-01

Explains how daily maintenance and design planning can reduce the potential safety hazards found in athletic-facility locker rooms. Topics include designing locker rooms for visual openness and traffic control, providing non-slip surfaces and proper drainage, installing ventilation systems that can handle the moisture produced in locker rooms,…

Burn Rate Modification with Carborane Polymers

DTIC Science & Technology

2017-11-01

test, ARDEC electrostatic discharge test, and DSC analysis of the small-scale runs were performed to ensure the products were safe to handle. Once...Accessions Division 8725 John J. Kingman Road, Ste 0944 Fort Belvoir, VA 22060-6218 GIDEP Operations Center P.O. Box 8000 Corona , CA

40 CFR 243.201-2 - Recommended procedures: Operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... waste handling techniques, and in the proper operation of collection equipment, such as those presented in Operation Responsible: Safe Refuse Collection. (b) Personal protective equipment such as gloves... Standards for Subpart I—Personal Protective Equipment (29 CFR 1910.132 through 1910.137). (c) Scavenging...

40 CFR 243.201-2 - Recommended procedures: Operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... waste handling techniques, and in the proper operation of collection equipment, such as those presented in Operation Responsible: Safe Refuse Collection. (b) Personal protective equipment such as gloves... Standards for Subpart I—Personal Protective Equipment (29 CFR 1910.132 through 1910.137). (c) Scavenging...

Infectious Waste in Camp.

ERIC Educational Resources Information Center

Erceg, Linda Ebner

1993-01-01

As a result of new federal regulations, camps are revising procedures for waste disposal from their health centers. Discusses the importance of properly handling infectious material and developing written policies; determining how infectious waste can be incorporated safely into the general waste stream; and arranging for disposal. (LP)

40 CFR 180.530 - 2,2-Dimethyl-1,3-benzodioxol-4-ol methylcarbamate; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... used in spot and/or crack and crevice treatments in animal feed handling establishments, including feed... insecticide 2,2-dimethyl-1,3-benzodioxol-4-yl methylcarbamate may be safely used in spot and/or crack and...

Interprofessional teaching project with nursing and physical therapy students to promote caregiver and patient safety.

PubMed

von der Lancken, Shelley; Levenhagen, Kim

2014-12-01

Nurse educators must adjust curricula to meet the dynamic and critical changes in the health care environment, and to recognize the risk of injury our educational approach has on safety, team effectiveness, and culture change. Interprofessional collaboration and simulation are key components in the preparation of our students. Utilizing the interprofessional alliance model, an experience to promote collaborative relationships among nursing and physical therapy (PT) students to improve patient and caregiver safety was developed. Through this model, PT students taught safe patient-handling skills in a simulated setting to undergraduate nursing students. The majority of nursing students (N=351) from 2009–2014 strongly agreed or agreed that they were confident in the skills taught by the PT students and provided an overall course rating of outstanding or above average. This educational model, which includes simulation and safe patient handling, was a valuable addition to the curriculum, reinforcing the significance of developing collaborative relationships. Copyright 2014, SLACK Incorporated.

Setting Occupational Exposure Limits for Genotoxic Substances in the Pharmaceutical Industry.

PubMed

Lovsin Barle, Ester; Winkler, Gian Christian; Glowienke, Susanne; Elhajouji, Azeddine; Nunic, Jana; Martus, Hans-Joerg

2016-05-01

In the pharmaceutical industry, genotoxic drug substances are developed for life-threatening indications such as cancer. Healthy employees handle these substances during research, development, and manufacturing; therefore, safe handling of genotoxic substances is essential. When an adequate preclinical dataset is available, a risk-based decision related to exposure controls for manufacturing is made following a determination of safe health-based limits, such as an occupational exposure limit (OEL). OELs are calculated for substances based on a threshold dose-response once a threshold is identified. In this review, we present examples of genotoxic mechanisms where thresholds can be demonstrated and OELs can be calculated, including a holistic toxicity assessment. We also propose a novel approach for inhalation Threshold of Toxicological Concern (TTC) limit for genotoxic substances in cases where the database is not adequate to determine a threshold. © The Author 2016. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Molecular hydrodynamics of high explosives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belak, J.

1994-11-01

High explosives release mechanical energy through chemical reactions. Applications of high explosives are vast in the mining and military industries and are beginning to see more civilian applications such as the deployment of airbags in modern automobiles. One of the central issues surrounding explosive materials is decreasing their sensitivity, necessary for their safe handling, while maintaining a high yield. Many practical tests have been devised to determine the sensitivity of explosive materials to shock, to impact, to spark, and to friction. These tests have great value in determining yield and setting precautions for safe handling but tell little of themore » mechanisms of initiation. How is the mechanical energy of impact or friction transformed into the chemical excitation that initiates explosion? The answer is intimately related to the structure of the explosive material, the size and distribution of grains, the size and presence of open areas such as voids and gas bubbles, and inevitably the bonding between explosive molecules.« less

"Doing the heavy lifting: health care workers take back their backs".

PubMed

Morse, Tim; Fekieta, Renee; Rubenstein, Harriet; Warren, Nick; Alexander, Darryl; Wawzyniecki, Patricia

2008-01-01

Health care workers have the highest musculoskeletal disorder prevalence and incidence of any occupational/industry group, and patient handling tasks are so biomechanically demanding that they cannot be made safe through the commonly used, technique-oriented methods such as "back school" training programs. Although there is standard-setting activity for "no-lift" programs in some states, there is still no federal standard. Health care worker unions and nurses' associations have begun to take action through training members in equipment need, use, and acceptance in programs to encourage adoption of no-lifting programs. Acceptance of lifting equipment is increasing due to recognition of the high human and economic costs of MSD, consistent documentation of cost savings from no-lift programs, major improvements in lifting equipment, and shortages of health care staff. An action-oriented training program for health care workers is described that provides knowledge about the 1) Scope of the current problem of back injuries in health care, 2) Costs of injuries, both to workers and to the hospital, 3) Elements of a safe patient-handling program, and 4) Success stories. The program also builds skills through: 1) Hands-on experience with safe lifting equipment, and 2) Assessing organizational and union readiness and planning for action at the workplace.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alnajjar, Mikhail S.; Quigley, David; Kuntamukkula, Murty

Due to the inherent nature of pyrophoric substances to ignite spontaneously upon exposure to air, special precautions must be taken to ensure their safe handling and use. Pyrophoric gases (such as diborane, dichloroborane, phosphine, etc.) are typically the easiest class of pyrophoric substances to handle since the gas can be plumbed directly to the application and used remotely. Pyrophoric solids and liquids, however, require the user to physically manipulate them when transferring them from one container to another. Failure to follow proper safety precautions could result in serious injury or unintended consequences to laboratory personnel.12 Because of this danger, pyrophoricsmore » should be handled only by experienced personnel. Users with limited experience must be trained on how to handle pyrophoric reagents and consult with a knowledgeable staff member prior to performing the experimental task. The purpose of this article is three fold: 1) to provide guidelines and general safety precautions to avoid accidents, 2) describe proper techniques on how to successfully handle, store, and dispose of pyrophoric liquids and solids, and 3) illustrate best practices for working with this class of reactants in a laboratory environment.« less

Clinical solid waste management practices and its impact on human health and environment - A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hossain, Md. Sohrab; Santhanam, Amutha; Nik Norulaini, N.A.

2011-04-15

Research highlights: > Appropriate waste management technology for safe handling and disposal of clinical solid waste. > Infectious risk assessment on unsafe handling of clinical solid waste. > Recycling-reuse program of clinical solid waste materials. > Effective sterilization technology to reduce exposure of infectious risk. - Abstract: The management of clinical solid waste (CSW) continues to be a major challenge, particularly, in most healthcare facilities of the developing world. Poor conduct and inappropriate disposal methods exercised during handling and disposal of CSW is increasing significant health hazards and environmental pollution due to the infectious nature of the waste. This articlemore » summarises a literature review into existing CSW management practices in the healthcare centers. The information gathered in this paper has been derived from the desk study of open literature survey. Numerous researches have been conducted on the management of CSW. Although, significant steps have been taken on matters related to safe handling and disposal of the clinical waste, but improper management practice is evident from the point of initial collection to the final disposal. In most cases, the main reasons of the mismanagement of CSW are the lack of appropriate legislation, lack of specialized clinical staffs, lack of awareness and effective control. Furthermore, most of the healthcare centers of the developing world have faced financial difficulties and therefore looking for cost effective disposal methods of clinical waste. This paper emphasizes to continue the recycle-reuse program of CSW materials after sterilization by using supercritical fluid carbon dioxide (SF-CO2) sterilization technology at the point of initial collection. Emphasis is on the priority to inactivate the infectious micro-organisms in CSW. In that case, waste would not pose any threat to healthcare workers. The recycling-reuse program would be carried out successfully with the non-specialized clinical staffs. Therefore, the adoption of SF-CO2 sterilization technology in management of clinical solid waste can reduce exposure to infectious waste, decrease labor, lower costs, and yield better compliance with regulatory. Thus healthcare facilities can both save money and provide a safe environment for patients, healthcare staffs and clinical staffs.« less

Protection of therapeutic antibodies from visible light induced degradation: Use safe light in manufacturing and storage.

PubMed

Du, Cheng; Barnett, Gregory; Borwankar, Ameya; Lewandowski, Angela; Singh, Nripen; Ghose, Sanchayita; Borys, Michael; Li, Zheng Jian

2018-06-01

As macromolecules, biologics are susceptible to light exposure, which induces oxidation of multiple amino acid residues including tryptophan, tyrosine, phenylalanine, cysteine and methionine. Pertaining to safety, efficacy and potency, light-induced oxidation of biologics has been widely studied and necessary precautions need to be taken during biologics manufacturing process, drug substance and products handling and storage. Proteins will degrade to varying extents depending on the protein properties, degradation pathways, formulation compositions and type of light source. In addition to UV light, which has been widely known to degrade proteins, visible light from indoor fluorescent lighting also can mediate protein degradation. In this report, we examine and identify wavelengths in the visual spectrum (400-700 nm) that can cause monoclonal antibody and histidine buffer degradation. Installation of safe lights which exclude the identified damaging wavelengths from visible spectra in manufacturing and storage areas can provide a balance between lighting requirement for human operators and their safety and conservation of product quality. Copyright © 2018 Elsevier B.V. All rights reserved.

You Be the Chemist [Multimedia Kit].

ERIC Educational Resources Information Center

National Association of Chemical Distributors, Arlington, VA. Educational Foundation.

This multimedia kit includes a teacher's manual, video, and activity packet. The unique interactive course uses safe, controlled dynamic experiments to teach kids about chemistry, the proper handling of chemicals, and responsible product stewardship. Students are asked to hypothesize about chemical substances, collect and analyze data, and share…

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

Hunter Education: Student Manual. Shooting Skills Series.

ERIC Educational Resources Information Center

Staton, Robert D., Jr.

Designed for use in a hunter education course or as a self-teaching workbook, the student manual presents the following topics: an overall picture including firearms accidents and hunter education; firearms and ammunition; hunting tradition and ethics; the hunter and conservation; safe firearms handling; hunter responsibilities; hunter…

Home Hemodialysis

MedlinePlus

... home hemodialysis: You do this three times a week for three to four hours or longer each time. You and your care partner are trained to do dialysis safely and to handle any problems that may come up. Training may take from several weeks to a few months. 2. Short daily home ...

50 CFR 635.8 - Workshops.

Code of Federal Regulations, 2014 CFR

2014-10-01

... workshop on the safe handling, release, and identification of protected species before a shark or swordfish... renew or obtain a shark or swordfish limited access permit. (4) An operator that fishes with longline or... NMFS no later than December 31, 2006. (b) Atlantic shark identification workshops. (1) As of December...

50 CFR 635.8 - Workshops.

Code of Federal Regulations, 2013 CFR

2013-10-01

... workshop on the safe handling, release, and identification of protected species before a shark or swordfish... renew or obtain a shark or swordfish limited access permit. (4) An operator that fishes with longline or... NMFS no later than December 31, 2006. (b) Atlantic shark identification workshops. (1) As of December...

14 CFR 137.19 - Certification requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... economic poisons, that applicant is not required to demonstrate the knowledge required in paragraphs (e)(1... starting operations, including survey of the area to be worked. (ii) Safe handling of economic poisons and the proper disposal of used containers for those poisons. (iii) The general effects of economic...

14 CFR 137.19 - Certification requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... economic poisons, that applicant is not required to demonstrate the knowledge required in paragraphs (e)(1... starting operations, including survey of the area to be worked. (ii) Safe handling of economic poisons and the proper disposal of used containers for those poisons. (iii) The general effects of economic...

14 CFR 137.19 - Certification requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... economic poisons, that applicant is not required to demonstrate the knowledge required in paragraphs (e)(1... starting operations, including survey of the area to be worked. (ii) Safe handling of economic poisons and the proper disposal of used containers for those poisons. (iii) The general effects of economic...

14 CFR 137.19 - Certification requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... economic poisons, that applicant is not required to demonstrate the knowledge required in paragraphs (e)(1... starting operations, including survey of the area to be worked. (ii) Safe handling of economic poisons and the proper disposal of used containers for those poisons. (iii) The general effects of economic...

Spacelab D-1 mission

NASA Technical Reports Server (NTRS)

Dunbar, Bonnie J.

1990-01-01

The Spacelab D-1 (Deutchland Eins) Mission is discussed from the points of view of safety, materials handling, and toxic materials; the laboratory and equipment used; and some of the different philosophies utilized on this flight. How to enhance scientific return at the same time as being safe was examined.

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

NASA Astrophysics Data System (ADS)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

Optimisation of surfactant decontamination and pre-treatment of waste chicken feathers by using response surface methodology.

PubMed

Tesfaye, Tamrat; Sithole, Bruce; Ramjugernath, Deresh; Ndlela, Luyanda

2018-02-01

Commercially processed, untreated chicken feathers are biologically hazardous due to the presence of blood-borne pathogens. Prior to valorisation, it is crucial that they are decontaminated to remove the microbial contamination. The present study focuses on evaluating the best technologies to decontaminate and pre-treat chicken feathers in order to make them suitable for valorisation. Waste chicken feathers were washed with three surfactants (sodium dodecyl sulphate) dimethyl dioctadecyl ammonium chloride, and polyoxyethylene (40) stearate) using statistically designed experiments. Process conditions were optimised using response surface methodology with a Box-Behnken experimental design. The data were compared with decontamination using an autoclave. Under optimised conditions, the microbial counts of the decontaminated and pre-treated chicken feathers were significantly reduced making them safe for handling and use for valorisation applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Detail view of the lower portion of the vertical stabilizer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of the lower portion of the vertical stabilizer of the Orbiter Discovery. The section below the rudder, often referred to as the "stinger", is used to house the orbiter drag chute assembly. The system consisted of a mortar deployed pilot chute, the main drag chute, a controller assembly and an attach/jettison mechanism. This system was a modification to the original design of the Orbiter Discovery to safely reduce the roll to stop distance without adversely affecting the vehicle handling qualities. This view was taken from a service platform in the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Discrete Element Modeling of Triboelectrically Charged Particles

NASA Technical Reports Server (NTRS)

Hogue, Michael D.; Calle, Carlos I.; Weitzman, Peter S.; Curry, David R.

2008-01-01

Tribocharging of particles is common in many processes including fine powder handling and mixing, printer toner transport and dust extraction. In a lunar environment with its high vacuum and lack of water, electrostatic forces are an important factor to consider when designing and operating equipment. Dust mitigation and management is critical to safe and predictable performance of people and equipment. The extreme nature of lunar conditions makes it difficult and costly to carry out experiments on earth which are necessary to better understand how particles gather and transfer charge between each other and with equipment surfaces. DEM (Discrete Element Modeling) provides an excellent virtual laboratory for studying tribocharging of particles as well as for design of devices for dust mitigation and for other purposes related to handling and processing of lunar regolith. Theoretical and experimental work has been performed pursuant to incorporating screened Coulombic electrostatic forces into EDEM, a commercial DEM software package. The DEM software is used to model the trajectories of large numbers of particles for industrial particulate handling and processing applications and can be coupled with other solvers and numerical models to calculate particle interaction with surrounding media and force fields. While simple Coulombic force between two particles is well understood, its operation in an ensemble of particles is more complex. When the tribocharging of particles and surfaces due to frictional contact is also considered, it is necessary to consider longer range of interaction of particles in response to electrostatic charging. The standard DEM algorithm accounts for particle mechanical properties and inertia as a function of particle shape and mass. If fluid drag is neglected, then particle dynamics are governed by contact between particles, between particles and equipment surfaces and gravity forces. Consideration of particle charge and any tribocharging and electric field effects requires calculation of the forces due to these effects.

Sodium Handling Technology and Engineering Design of the Madison Dynamo Experiment.

NASA Astrophysics Data System (ADS)

Kendrick, R.; Forest, C. B.; O'Connell, R.; Wright, A.; Robinson, K.

1998-11-01

A new liquid metal MHD experiment is being constructed at the University of Wisconsin to test several key predictions of dynamo theory: magnetic instabilities driven by sheared flow, the effects of turbulence on current generation, and the back-reaction of the self-generated magnetic field on the fluid motion which brings saturation. This presentation describes the engineering design of the experiment, which is a 0.5 m radius spherical vessel, filled with liquid sodium at 150 degrees Celsius. The experiment is designed to achieve a magnetic Reynolds number in excess of 100, which requires approximately 80 Hp of mechanical drive, producing flow velocities in sodium of 15 m/s through impellers. Handling liquid sodium offers a number of technical challenges, but routine techniques have been developed over the past several decades for safely handling large quantities for the fast breeder reactor. The handling strategy is discussed, technical details concerning seals and pressurazation are presented, and safety elements are highlighted.

Arthroscopic partial meniscectomy of a medial meniscus bucket-handle tear using the posteromedial portal.

PubMed

Ahn, Jin Hwan; Oh, Irvin

2004-09-01

Arthroscopic resection of irreparable bucket-handle tears of the medial meniscus is a commonly performed procedure. Adequate visualization of the posterior horn of the medial meniscus can be a challenging task with the conventional use of the anterior portal. An attempt to resect the posterior horn in a blind fashion may result in iatrogenic damage of the articular cartilage in the posterior compartment, over-resection of a remnant meniscus, or an insufficient resection of the torn fragment. We describe the use of the posteromedial portal for an accurate visualization and resection of the posterior attachment of a bucket-handle tear for arthroscopic partial meniscectomy, as well as detection of other injuries that may be involved in the posteromedial compartment, while avoiding injury to other intra-articular structures during the arthroscopic procedure. We found that the use of the posteromedial portal is a safe and efficient method in removing a bucket-handle tear of the medial meniscus in one piece.

Study on Handing Process and Quality Degradation of Oil Palm Fresh Fruit Bunches (FFB)

NASA Astrophysics Data System (ADS)

Mat Sharif, Zainon Binti; Taib, Norhasnina Binti Mohd; Yusof, Mohd Sallehuddin Bin; Rahim, Mohammad Zulafif Bin; Tobi, Abdul Latif Bin Mohd; Othman, Mohd Syafiq Bin

2017-05-01

The main objective of this study is to determine the relationship between quality of oil palm fresh fruit bunches (FFB) and handling processes. The study employs exploratory and descriptive design, with quantitative approach and purposive sampling using self-administrated questionnaires, were obtained from 30 smallholder respondents from the Southern Region, Peninsular Malaysia. The study reveals that there was a convincing relationship between quality of oil palm fresh fruit bunches (FFB) and handling processes. The main handling process factors influencing quality of oil palm fresh fruit bunches (FFB) were harvesting activity and handling at the plantation area. As a result, it can be deduced that the handling process factors variable explains 82.80% of the variance that reflects the quality of oil palm fresh fruit bunches (FFB). The overall findings reveal that the handling process factors do play a significant role in the quality of oil palm fresh fruit bunches (FFB).

Anhydrous Ammonia Training Module. Trainer's Package. Participant's Package.

ERIC Educational Resources Information Center

Beaudin, Bart; And Others

This document contains a trainer's and a participant's package for teaching employees on site safe handling procedures for working with anhydrous ammonia, especially on farms. The trainer's package includes the following: a description of the module; a competency; objectives; suggested instructional aids; a training outline (or lesson plan) for…

29 CFR 1910.22 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading.... (d) Floor loading protection. (1) In every building or other structure, or part thereof, used for... roof of a building or other structure a load greater than that for which such floor or roof is approved...

29 CFR 1910.22 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading.... (d) Floor loading protection. (1) In every building or other structure, or part thereof, used for... roof of a building or other structure a load greater than that for which such floor or roof is approved...

29 CFR 1910.22 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading.... (d) Floor loading protection. (1) In every building or other structure, or part thereof, used for... roof of a building or other structure a load greater than that for which such floor or roof is approved...

Hunter Education: Instructor Manual. Shooting Skills Series.

ERIC Educational Resources Information Center

Diebold, Louis, Comp.; And Others

Composed of three books (a procedures guide, the basic student manual, and lesson plans), the instructor's manual provides information to set up and conduct a Hunter Education Certification Course. Course topics include: an introduction, firearms and ammunition, hunting tradition and ethics, the hunter and conservation, safe firearms handling,…

Hamburger Science

ERIC Educational Resources Information Center

Trent, Ann

2004-01-01

While babysitting or preparing home meals, young people (and adults too) sometimes overlook cleanliness procedures. One of the first employment opportunities for teenagers is often in a fast-food restaurant where the safe handling and proper cooking of foods is essential. To teach students about food safety practices, the U.S. Food and Drug…

Handbook for Handling, Storing, and Dispensing E85 and Other Ethanol-Gasoline Blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-09-17

This document serves as a guide for blenders, distributors, sellers, and users of E85 and other ethanol blends above E10. It provides basic information on the proper and safe use of E85 and other ethanol blends and includes supporting technical and policy references.

Nuclear Chemistry, Science (Experimental): 5316.62.

ERIC Educational Resources Information Center

Williams, Russell R.

This nuclear chemistry module includes topics on atomic structure, instability of the nucleus, detection strengths and the uses of radioactive particles. Laboratory work stresses proper use of equipment and safe handling of radioactive materials. Students with a strong mathematics background may consider this course as advanced work in chemistry.…

14 CFR 23.237 - Operation on water.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Operation on water. 23.237 Section 23.237... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 23.237 Operation on water. A wave height, demonstrated to be safe for operation, and any...

14 CFR 25.237 - Wind velocities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Wind velocities. 25.237 Section 25.237... STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 25.237 Wind... wind velocity, demonstrated to be safe for takeoff and landing, must be established for dry runways and...

Effects of Defensive Vehicle Handling Training on Novice Driver Safety : Phase 2. Advanced Driving Training

DOT National Transportation Integrated Search

2006-04-01

New teenaged drivers have the highest accident rates of any group of drivers. Research is needed to determine how to safely equip novice drivers with the important elements of experience before they encounter a need for it in an actual driving situat...

14 CFR 25.237 - Wind velocities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Wind velocities. 25.237 Section 25.237... STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 25.237 Wind... wind velocity, demonstrated to be safe for takeoff and landing, must be established for dry runways and...

14 CFR 25.237 - Wind velocities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Wind velocities. 25.237 Section 25.237... STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 25.237 Wind... wind velocity, demonstrated to be safe for takeoff and landing, must be established for dry runways and...

30 CFR 56.6311 - Handling of misfires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... misfire cannot be disposed of safely, each approach to the area affected by the misfire shall be posted... immediately to mine management. (d) Misfires occurring during the shift shall be reported to mine management.... (b) Only work necessary to remove a misfire and protect the safety of miners engaged in the removal...

30 CFR 56.6311 - Handling of misfires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... misfire cannot be disposed of safely, each approach to the area affected by the misfire shall be posted... immediately to mine management. (d) Misfires occurring during the shift shall be reported to mine management.... (b) Only work necessary to remove a misfire and protect the safety of miners engaged in the removal...

Hydrogen Infrastructure Testing and Research Facility Video (Text Version)

Science.gov Websites

grid integration, continuous code improvement, fuel cell vehicle operation, and renewable hydrogen stations. NRELs research on hydrogen safety provides guidance for safe operation, handling, and use of standards and testing fuel cell and hydrogen components for operation and safety. Building on NRELs Wind-to

46 CFR 151.45-4 - Cargo-handling.

Code of Federal Regulations, 2010 CFR

2010-10-01

... vessel shall be considered when making the cargo connections to insure safe cargo transfer. Suitable material shall be used in joints and in couplings when making connections to insure that they are tight... connections are supported by the vessel's tackle, the person in charge of the transfer operations shall...

33 CFR 96.380 - How will the Coast Guard handle compliance and enforcement of these regulations?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety management system while operating the vessel or transferring cargoes. (b) A foreign vessel that... GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems Be Certificated and Enforced...

Lightweight protective clothing for the safe handling of high-intensity pressurized lamps

NASA Technical Reports Server (NTRS)

Ewashinka, J. G.

1975-01-01

Five commercially available clothing materials, selected for their high cutting resistance, high strength, light weight and pliability, were tested by exposing them to exploding lamps located less than 60 cm (2 ft) away. Face shield material tested initially was commercial high-strength polycarbonate plastic.

High gantry for lifting and handling

NASA Technical Reports Server (NTRS)

Kerley, J. J., Jr.; Tereniak, W. T.

1977-01-01

Standard gantry has been inexpensively modified with standard pipes to allow lifting of heavy loads to distances between 14 and 30 ft. Addition of air mounts permits extensive and sensitive equipment to be moved smoothly and safely over smooth or moderately rough surfaces. Unit has been tested at 6000 pounds without yielding.

Adolescent Drunkenness: Perception of the Problem in Russia and Germany

ERIC Educational Resources Information Center

Rybakova, L. N.

2013-01-01

Alcohol abuse in Russia among children is increasing, but programs to address this problem have not been adequately developed. The experience of other countries in equipping children to handle alcohol in a mature and safe way can be used as a basis for creating new programs in Russia.

Nurses and Dietitians Differ in Food Safety Information Provided to Highly Susceptible Clients

ERIC Educational Resources Information Center

Buffer, Janet; Kendall, Patricia; Medeiros, Lydia; Schroeder, Mary; Sofos, John

2013-01-01

Objective: To determine content, education channels, and motivational factors that influence what health professionals teach about safe food handling to populations who are highly susceptible for foodborne illnesses. To assess the differences in information provided by health professionals to highly susceptible populations. Design: Descriptive,…

Managing Difficult, Frustrating, and Hostile Conversations: Strategies for Savvy Administrators. Second Edition

ERIC Educational Resources Information Center

Kosmoski, Georgia J.; Pollack, Dennis R.

2005-01-01

The second edition of this best-selling resource provides new and updated content influenced by the feedback of over 250 school administrators. "Managing Difficult, Frustrating, and Hostile Conversations" uncovers safe and effective strategies for dispelling common sensitive situations such as handling legitimate complaints, controlling those…

78 FR 3853 - Retrievability, Cladding Integrity and Safe Handling of Spent Fuel at an Independent Spent Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

... requirement that loaded storage casks also meet transportation requirements. Integration of storage and... transported from the storage location. As part of its evaluation of integration and compatibility between... evaluating compatibility of storage and transportation regulations. As part of its evaluation of integration...

A Guide for the Safe Handling of Engineered and Fabricated Nanomaterials

ERIC Educational Resources Information Center

Greaves-Holmes, Wanda L.

2009-01-01

In the absence of scientific clarity regarding the potential health effects of occupational exposure to nanoparticles, there is a need for guidance in making decisions about hazards, risks, and controls (Schulte & Salmanca-Buentello, 2007). Presently, no guiding principles have been universally accepted for personal protective equipment that is…

14 CFR 23.237 - Operation on water.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Operation on water. 23.237 Section 23.237... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 23.237 Operation on water. A wave height, demonstrated to be safe for operation, and any...

14 CFR 23.237 - Operation on water.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Operation on water. 23.237 Section 23.237... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 23.237 Operation on water. A wave height, demonstrated to be safe for operation, and any...

Owl Pellets and Crisis Management.

ERIC Educational Resources Information Center

Anderson, Tom

2002-01-01

Describes a press conference that was used as a "teachable moment" when owl pellets being used for instructional purposes were found to be contaminated with Salmonella. The incident highlighted the need for safe handling of owl pellets, having a crisis management plan, and the importance of conveying accurate information to concerned parents.…

29 CFR 1926.605 - Marine operations and equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... chapter. The term “longshoring operations” means the loading, unloading, moving, or handling of... surfaces of barges. (1) Employees shall not be permitted to walk along the sides of covered lighters or... a safe passage. (4) Employees shall not be permitted to walk over deckloads from rail to coaming...

14 CFR 23.237 - Operation on water.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Operation on water. 23.237 Section 23.237... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 23.237 Operation on water. A wave height, demonstrated to be safe for operation, and any...

Effects of Defensive Vehicle Handling Training on Novice Driver Safety : Phase 1. Preparation for Advanced Driving Training

DOT National Transportation Integrated Search

2006-10-01

New teenaged drivers have the highest accident rates of any group of drivers. Research is needed to : determine how to safely equip novice drivers with the important elements of experience before they encounter : a need for it in an actual driving si...

50 CFR 635.8 - Workshops.

Code of Federal Regulations, 2011 CFR

2011-10-01

... renew or obtain a shark or swordfish limited access permit. (4) An operator that fishes with longline or... fishes with longline or gillnet gear must be certified by NMFS, or its designee, as having completed a workshop on the safe handling, release, and identification of protected species before a shark or swordfish...

50 CFR 635.8 - Workshops.

Code of Federal Regulations, 2010 CFR

2010-10-01

... renew or obtain a shark or swordfish limited access permit. (4) An operator that fishes with longline or... fishes with longline or gillnet gear must be certified by NMFS, or its designee, as having completed a workshop on the safe handling, release, and identification of protected species before a shark or swordfish...

14 CFR 25.237 - Wind velocities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Wind velocities. 25.237 Section 25.237... STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 25.237 Wind... wind velocity, demonstrated to be safe for takeoff and landing, must be established for dry runways and...

14 CFR 25.237 - Wind velocities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Wind velocities. 25.237 Section 25.237... STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Ground and Water Handling Characteristics § 25.237 Wind... wind velocity, demonstrated to be safe for takeoff and landing, must be established for dry runways and...

It's Time to Develop a New "Draft Test Protocol" for a Mars Sample Return Mission (or Two....)

NASA Astrophysics Data System (ADS)

Rummel, J. D.

2018-04-01

A Mars Sample Return (MSR) will involve analysis of those samples in containment, including their safe receiving, handling, testing, and archiving. With an MSR planned for the end of the next decade, it is time to update the existing MSR protocol.

Outdoorsman: Outdoor Cooking.

ERIC Educational Resources Information Center

Alberta Dept. of Agriculture, Edmonton.

This Outdoor Cookery manual provides information and instruction on the basic outdoor skills of building suitable cooking fires, handling fires safely, and storing food. The necessity of having the right kind of fire is stressed (high flames for boiling, low for stewing, and coals for frying and broiling). Tips on gauging temperature, what types…

How to Handle Radioisotopes Safely.

ERIC Educational Resources Information Center

Sulcoski, John W.

This booklet is one in a series of instructional aids designed for use by elementary and secondary school science teachers. The various units and forms of radioactive materials used by teachers are first considered. Then, the quantities of radioisotopes that a person may possess without a license from the Atomic Energy Commission (AEC) are…

Thermodynamic and experimental study of UC powders ignition

NASA Astrophysics Data System (ADS)

Le Guyadec, F.; Rado, C.; Joffre, S.; Coullomb, S.; Chatillon, C.; Blanquet, E.

2009-09-01

Mixed plutonium and uranium carbide (UPuC) is considered as a possible fuel material for future nuclear reactors. However, UPuC is pyrophoric and fine powders of UPuC are subject to temperature increase due to oxidation with air and possible ignition during conditioning and handling. In a first approach and to allow easier experimental conditions, this study was undertaken on uranium monocarbide (UC) with the aim to determine safe handling conditions for the production and reprocessing of uranium carbide fuels. The reactivity of uranium monocarbide in oxidizing atmosphere was studied in order to analyze the ignition process. Experimental thermogravimetric analysis (TGA) and differential thermal analysis (DTA) revealed that UC powder obtained by arc melting and milling is highly reactive in air at about 200 °C. The phases formed at the various observed stages of the oxidation process were analyzed by X-ray diffraction. At the same time, ignition was analyzed thermodynamically along isothermal sections of the U-C-O ternary diagram and the pressure of the gas produced by the UC + O 2 reaction was calculated. Two possible oxidation schemes were identified on the U-C-O phase diagram and assumptions are proposed concerning the overall oxidation and ignition paths. It is particularly important to understand the mechanisms involved since temperatures as high as 2500 °C could be reached, leading to CO(g) production and possibly to a blast effect.

Handling Practices of Fresh Leafy Greens in Restaurants: Receiving and Training†

PubMed Central

COLEMAN, ERIK; DELEA, KRISTIN; EVERSTINE, KAREN; REIMANN, DAVID; RIPLEY, DANNY

2015-01-01

Multiple foodborne illness outbreaks have been associated with the consumption of fresh produce. Investigations have indicated that microbial contamination throughout the farm-to-fork continuum often contributed to these outbreaks. Researchers have hypothesized that handling practices for leafy greens in restaurants may support contamination by and proliferation and amplification of pathogens that cause foodborne illness outbreaks. However, limited data are available on how workers handle leafy greens in restaurants. The purpose of this study was to collect descriptive data on handling practices of leafy greens in restaurants, including restaurant characteristics, types of leafy greens used, produce receipt, and food safety training and certification. As a federal collaborative partner with the Environmental Health Specialists Network (EHS-Net) of the Centers for Disease Control and Prevention, the U.S. Food and Drug Administration (FDA) recommended that EHS-Net participants survey handling practices for leafy greens in restaurants. The recommendations in the FDA’s Guide to Minimize Microbial Food Safety Hazards of Leafy Greens are significant to this study for comparison of the results. The survey revealed that appropriate handling procedures assist in the mitigation of other unsafe handling practices for leafy greens. These results are significant because the FDA guidance for the safe handling of leafy greens was not available until 2009, after the survey had been completed. The information provided from this study can be used to promote additional efforts that will assist in developing interventions to prevent future foodborne illness outbreaks associated with leafy greens. PMID:24290691

Consumer Shell Egg Consumption and Handling Practices: Results from a National Survey.

PubMed

Kosa, Katherine M; Cates, Sheryl C; Bradley, Samantha; Godwin, Sandria; Chambers, Delores

2015-07-01

Numerous cases and outbreaks of Salmonella infection are attributable to shell eggs each year in the United States. Safe handling and consumption of shell eggs at home can help reduce foodborne illness attributable to shell eggs. A nationally representative Web survey of 1,504 U.S. adult grocery shoppers was conducted to describe consumer handling practices and consumption of shell eggs at home. Based on self-reported survey data, most respondents purchase shell eggs from a grocery store (89.5%), and these eggs were kept refrigerated (not at room temperature; 98.5%). As recommended, most consumers stored shell eggs in the refrigerator (99%) for no more than 3 to 5 weeks (97.6%). After cracking eggs, 48.1% of respondents washed their hands with soap and water. More than half of respondents who fry and/or poach eggs cooked them so that the whites and/or the yolks were still soft or runny, a potentially unsafe practice. Among respondents who owned a food thermometer (62.0%), only 5.2% used it to check the doneness of baked egg dishes when they prepared such a dish. Consumers generally followed two of the four core "Safe Food Families" food safety messages ("separate" and "chill") when handling shell eggs at home. To prevent Salmonella infection associated with shell eggs, consumers should improve their practices related to the messages "clean" (i.e., wash hands after cracking eggs) and "cook" (i.e., cook until yolks and whites are firm and use a food thermometer to check doneness of baked egg dishes) when preparing shell eggs at home. These findings will be used to inform the development of science-based consumer education materials that can help reduce foodborne illness from Salmonella infection.

Work-related musculoskeletal risks associated with nurses and nursing assistants handling overweight and obese patients: A literature review.

PubMed

Choi, Sang D; Brings, Kathryn

2015-01-01

Nurses and nursing assistants are susceptible to work-related musculoskeletal disorders and injuries (WMSDs) due to the increase in overweight and obese patients they are handling on a daily basis. This study aimed to review work-related musculoskeletal hazards and risks associated with handling overweight and obese patients, and summarize the recommended interventions to mitigate musculoskeletal concerns among nurses and nursing assistants. Approximately 350 publications were initially screened and 22 refereed articles were used to synthesize for this study on the bases of inclusion/exclusion relevance and strength of evidence on overweight or obese patient handling. Evidence suggested that the work-related musculoskeletal risks among nurses and nursing assistants included sprains/strains, low back pain, wrist, knee and shoulder injuries. The findings indicated that the WMSD risks increased when nurses and nursing assistants were manually moving or lifting patients, especially when the patients were overweight or obese. The recommended solutions included the lifting/transfer equipment and devices, ergonomic assessments and controls, no-lift policies, and training and education. To alleviate the risk of musculoskeletal disorders and injuries among nurses and nursing assistants handling overweight or obese patients, additional research and development into what safe patient handling interventions suit this growing population needs to be addressed.

From Safe Nanomanufacturing to Nanosafe-by-Design processes

NASA Astrophysics Data System (ADS)

Schuster, F.; Lomello, F.

2013-04-01

Industrial needs in terms of multifunctional components are increasing. Many sectors are concerned, from the integrated direct nanoparticles production to the emerging combinations which include the metal matrix composites (MMC), ductile ceramics and ceramic matrix composites, polymer matrix composites (PMC) for bulk application and advanced surface coatings in the fields of automotive, aerospace, energy production and building applications. Moreover, domains with a planetary impact such as environmental issues, as well as aspects for instance health (toxicity) and hazard assessment (ignition and explosion severity) were also taken into account. Nanotechnologies play an important role in promoting innovation in design and realization of multifunctional products for the future, either by improving usual products or creating new functions and/or new products. Nevertheless, this huge evolution in terms of materials could only be promoted by increasing the social acceptance and by acting on the different main technological and economic challenges and developing safe oriented processes. Nowadays, a huge number of developments of nanoparticles are potentially industrial up-scalable. However, some doubts exist about the handling's safety of the current technologies. For these reasons, the main purpose was to develop a self-monitored automation in the production line coupling different techniques in order to simplify processes such as in-situ growth nanoparticles into a nanostructured matrix, over different substrates and/or the nanopowders synthesis, functionalization, dry or wet safe recovery system, granulation, consolidation in single-step, by monitoring at real time the processing parameters such as powder stoichiometry. With the aim of assuring the traceability of the product during the whole life, starting from the conception and including the R&D, the distribution and the use were also considered. The optimization in terms of processing, recovery and conditioning, permits to increase its versatility, thus leading to the increase of the added value to the production. This review put in evidence -by different examples- the progress achieved since the beginning of Nanosafe integrated initiative developed by CEA and its partners as well as promoting, firstly the safety at work place, and then extending to an integrated and controlled in-situ production by of Nanosafe-by-Design controlled processes.

Criticality Safety Evaluation of the LLNL Inherently Safe Subcritical Assembly (ISSA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, Catherine

2012-06-19

The LLNL Nuclear Criticality Safety Division has developed a training center to illustrate criticality safety and reactor physics concepts through hands-on experimental training. The experimental assembly, the Inherently Safe Subcritical Assembly (ISSA), uses surplus highly enriched research reactor fuel configured in a water tank. The training activities will be conducted by LLNL following the requirements of an Integration Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of LLNL instructors. This report provides the technical criticality safety basis for instructional operations with the ISSA experimental assembly.

Handling Procedures of Vegetable Crops

NASA Technical Reports Server (NTRS)

Perchonok, Michele; French, Stephen J.

2004-01-01

The National Aeronautics and Space Administration (NASA) is working towards future long duration manned space flights beyond low earth orbit. The duration of these missions may be as long as 2.5 years and will likely include a stay on a lunar or planetary surface. The primary goal of the Advanced Food System in these long duration exploratory missions is to provide the crew with a palatable, nutritious, and safe food system while minimizing volume, mass, and waste. Vegetable crops can provide the crew with added nutrition and variety. These crops do not require any cooking or food processing prior to consumption. The vegetable crops, unlike prepackaged foods, will provide bright colors, textures (crispy), and fresh aromas. Ten vegetable crops have been identified for possible use in long duration missions. They are lettuce, spinach, carrot, tomato, green onion, radish, bell pepper, strawberries, fresh herbs, and cabbage. Whether these crops are grown on a transit vehicle (e.g., International Space Station) or on the lunar or planetary surface, it will be necessary to determine how to safely handle the vegetables while maintaining acceptability. Since hydrogen peroxide degrades into water and oxygen and is generally recognized as safe (GRAS), hydrogen peroxide has been recommended as the sanitizer. The objective of th is research is to determine the required effective concentration of hydrogen peroxide. In addition, it will be determined whether the use of hydrogen peroxide, although a viable sanitizer, adversely affects the quality of the vegetables. Vegetables will be dipped in 1 % hydrogen peroxide, 3% hydrogen peroxide, or 5% hydrogen peroxide. Treated produce and controls will be stored in plastic bags at 5 C for up to 14 days. Sensory, color, texture, and total plate count will be measured. The effect on several vegetables including lettuce, radish, tomato and strawberries has been completed. Although each vegetable reacts to hydrogen peroxide differently, the data suggest that 5% hydrogen peroxide reduces the shelf life of the vegetable. A dip of either 1 % or 3% hydrogen peroxide helps reduce the microbial total count while not adversely affecting the quality of the vegetable.

Electrolytic pretreatment unit gaseous effluent conditioning

NASA Technical Reports Server (NTRS)

Colombo, G. V.; Putnam, D. F.

1976-01-01

The electrolytic pretreatment of urine is an advanced process that eliminates the need for handling and storing the highly corrosive chemicals that are normally used in water reclamation systems. The electrolytic pretreatment process also converts the organic materials in urine to gases (N2 and O2) that can be used to replenish those lost to space by leakage, venting, and air lock operations. The electrolytic process is more than a pretreatment, since it decreases the urine solids content by approximately one third, thus reducing the load and eventual solids storage requirements of the urine processing system. The evolved gases from the pretreatment step cannot, however, be returned directly to the atmosphere of a spacecraft without first removing several impurities including hydrogen, chlorine, and certain organic compounds. A treatment concept was developed that would decrease the impurities in the gas stream that emanates from an electrolysis unit to levels sufficiently low to allow the conditioned gas stream to be safely discharged to a spacecraft atmosphere. Two methods were experimentally demonstrated that can accomplish the desired cleanup. The bases of the two methods are, repectively: (1) raw urine scrubbing and (2) silica gel sorption.

Green and Smart: Hydrogels to Facilitate Independent Practical Learning

ERIC Educational Resources Information Center

Hurst, Glenn A.

2017-01-01

A laboratory experiment was developed to enable students to investigate the use of smart hydrogels for potential application in targeted drug delivery. This is challenging for students to explore practically because of the extremely high risks of handling cross-linking agents such as glutaraldehyde. Genipin is a safe and green alternative that has…

School Foodservice Employees' Perceptions of Practice: Differences by Generational Age and Hours Worked

ERIC Educational Resources Information Center

Strohbehn, Catherine; Jun, Jinhyun; Arendt, Susan

2014-01-01

Purpose/Objectives: This study investigated the influences of school foodservice employees' age and average number of hours worked per week on perceived safe food handling practices, barriers, and motivators. Methods: A bilingual survey (English and Spanish) was developed to assess reported food safety practices, barriers, and motivators to…

Handbook for Handling, Storing, and Dispensing E85 and Other Ethanol-Gasoline Blends (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moriarty, K.

2013-09-01

This document serves as a guide for blenders, distributors, sellers, and users of E85 and other ethanol blends above E10. It provides basic information on the proper and safe use of E85 and other ethanol blends and includes supporting technical and policy references.

Contact Information

Science.gov Websites

Employee Directory Toll Free & Emergency Numbers Questions regarding safe food handling practices: 1-87 Telephone: 907-465-5105; Toll Free 866-241-2805 Fax Number: 907-465-5129 Email: denise.koch@alaska.gov Air Free In-state 800-478-2577 Solid Waste 555 Cordova Street Anchorage, AK 99501 907-269-7802 State

A convenient enantioselective CBS-reduction of arylketones in flow-microreactor systems.

PubMed

De Angelis, Sonia; De Renzo, Maddalena; Carlucci, Claudia; Degennaro, Leonardo; Luisi, Renzo

2016-05-04

A convenient, versatile, and green CBS-asymmetric reduction of aryl and heteroaryl ketones has been developed by using the microreactor technology. The study demonstrates that it is possible to handle borane solution safely within microreactors and that the reaction performs well using 2-MeTHF as a greener solvent.

Exploring the Microbiome of Callinectes sapidus (Maryland Blue Crab)

PubMed Central

Reed, Elizabeth; Ottesen, Andrea

2018-01-01

ABSTRACT The Maryland blue crab (Callinectes sapidus) is a treasured food, especially in areas surrounding the Chesapeake Bay. It has huge economic impact on commerce, and thus, understanding the bacterial, fungal, and viral constituents of its microbiome provides valuable information to safely manage aquaculture, handling, and cooking of this valuable commodity. PMID:29853506

Gastroenteritis outbreak associated with unpasteurized tempeh, North Carolina, USA.

PubMed

Griese, Stephanie E; Fleischauer, Aaron T; MacFarquhar, Jennifer K; Moore, Zackary; Harrelson, Cris; Valiani, Anita; Morrison, Sue Ellen; Sweat, David; Maillard, Jean-Marie; Griffin, Denise; Springer, Debra; Mikoleit, Matthew; Newton, Anna E; Jackson, Brendan; Nguyen, Thai-An; Bosch, Stacey; Davies, Megan

2013-01-01

During an investigation of an outbreak of gastroenteritis caused by Salmonella enterica serovar Paratyphi B variant L(+) tartrate(+), we identified unpasteurized tempeh as a novel food vehicle and Rhizopus spp. starter culture as the source of the contamination. Safe handling of uncooked, unpasteurized tempeh should be emphasized for prevention of foodborne illnesses.

Safety in the Science Laboratory, A Guide.

ERIC Educational Resources Information Center

Christian, Floyd T.

The bulletin was prepared as a general guide to encourage the use of safe practices in science laboratories in Florida schools. The guide begins with an outline of recommended emergency procedures. Chapter I discusses the importance of safety in the science program. Chapter II discusses handling and storage of equipment, and designing laboratory…

Agricultural Pesticides: An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

ERIC Educational Resources Information Center

Harrison, Kenneth M.; And Others

This unit was developed as a guide for use by Kentucky teachers in planning and conducting young farmer/adult farmer classes in the use of agricultural pesticides. The unit contains seven lessons covering the following topics: understanding the importance of agricultural pesticides; using and handling agricultural pesticides safely; developing a…

Alternative Fuels Data Center: Animation of a Hydrogen Fueling Station

Science.gov Websites

containers (only pertains to dispersing equipment) - 3-foot setback Setbacks are applicable to a 7,000 psi , Safe Handling of Compressed Gases in Containers (Compressed Gas Association, 2006) 4.1 Transportation Storage Containers for Compressed Gases (Compressed Gas Association, 2005) 5.3.2 Nonliquid Compressed

Investigating Change in Adolescent Self-Efficacy of Food Safety through Educational Interventions

ERIC Educational Resources Information Center

Beavers, Amy S.; Murphy, Lindsay; Richards, Jennifer K.

2015-01-01

A successfully targeted intervention can influence food safety knowledge, attitudes, and behaviors, as well as encourage participants to recognize their own responsibility for safe food handling. This acknowledgement of an individual's responsibility and capacity to address food safety can be understood as self-efficacy of food safety (SEFS). This…

77 FR 38775 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

..., 2012, in Rosenberg, TX, has been changed to August 16, 2012. This workshop notice originally published... & Suites, 28332 SW Freeway 59, Rosenberg, TX 77471. The July and September workshop dates remain unchanged... Atlantic Shark Identification Workshop scheduled for August 9, 2012, in Rosenberg, TX, has been rescheduled...

Noodling for Mollusks

ERIC Educational Resources Information Center

Sukkestad, Kathryn; Curran, Mary Carla

2012-01-01

Mollusks, such as mussels and snails, are a great group to noodle because they are prevalent in banks and bottoms of river basins and in sandy beach habitats. Furthermore, their shells are easy to come by and safe to handle. There are six classes within the phylum Mollusca. In the activities described in this article, the authors focus on the…

46 CFR 154.1205 - Mechanical ventilation system: Standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... openings to accommodations, service, control station, and other gas-safe spaces. (c) Each ventilation system under § 154.1200 (a) and (b)(1) must change the air in that space and its adjoining trunks at... top of each space that personnel enter during cargo handling operations. (b) The discharge end of each...

75 FR 74693 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

... schedules, registration information, and a list of frequently asked questions regarding these workshops are... issued a certificate for each place of business that is permitted to receive sharks. These certificate(s... proxy for each place of business covered by the dealer's permit which first receives Atlantic sharks...

77 FR 73451 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... future. Authority: 16 U.S.C. 1801 et seq. Dated: December 4, 2012. Emily H. Menashes, Deputy Director.... SUPPLEMENTARY INFORMATION: The workshop schedules, registration information, and a list of frequently asked... receive sharks. These certificate(s) are valid for 3 years. Approximately 80 free Atlantic Shark...

29 CFR 1918.61 - General (See also appendix IV of this part).

Code of Federal Regulations, 2012 CFR

2012-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear...) Employer provided gear inspection. All gear and equipment provided by the employer shall be inspected by..., to ensure that it is safe. Any gear that is found upon such inspection to be unsafe shall not be used...

29 CFR 1918.61 - General (See also appendix IV of this part).

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear...) Employer provided gear inspection. All gear and equipment provided by the employer shall be inspected by..., to ensure that it is safe. Any gear that is found upon such inspection to be unsafe shall not be used...

29 CFR 1918.61 - General (See also appendix IV of this part).

Code of Federal Regulations, 2011 CFR

2011-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear...) Employer provided gear inspection. All gear and equipment provided by the employer shall be inspected by..., to ensure that it is safe. Any gear that is found upon such inspection to be unsafe shall not be used...

29 CFR 1918.61 - General (See also appendix IV of this part).

Code of Federal Regulations, 2013 CFR

2013-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear...) Employer provided gear inspection. All gear and equipment provided by the employer shall be inspected by..., to ensure that it is safe. Any gear that is found upon such inspection to be unsafe shall not be used...

76 FR 28727 - Notice of Request for a New Information Collection (Food Safety Education Campaign-Tracking Survey)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

...-reported prevention behaviors. The survey will be fielded once prior to launch of materials, and then again... audit of existing research and statistics surrounding the issue and prevention behaviors. Following this... illness and safe food handling behaviors held by the target audience. These research sessions were...

NIOSH health and safety practices survey of healthcare workers: training and awareness of employer safety procedures.

PubMed

Steege, Andrea L; Boiano, James M; Sweeney, Marie H

2014-06-01

The Health and Safety Practices Survey of Healthcare Workers describes current practices used to minimize chemical exposures and barriers to using recommended personal protective equipment for the following: antineoplastic drugs, anesthetic gases, high level disinfectants, surgical smoke, aerosolized medications (pentamidine, ribavirin, and antibiotics), and chemical sterilants. Twenty-one healthcare professional practice organizations collaborated with NIOSH to develop and implement the web-based survey. Twelve thousand twenty-eight respondents included professional, technical, and support occupations which routinely come in contact with the targeted hazardous chemicals. Chemical-specific safe handling training was lowest for aerosolized antibiotics (52%, n = 316), and surgical smoke (57%, n = 4,747). Reported employer procedures for minimizing exposure was lowest for surgical smoke (32%, n = 4,746) and anesthetic gases (56%, n = 3,604). Training and having procedures in place to minimize exposure to these chemicals is one indication of employer and worker safety awareness. Safe handling practices for use of these chemicals will be reported in subsequent papers. © 2014 Wiley Periodicals, Inc.

Department of Homeland Security (DHS) Proficiency Testing on Small-Scale Safety and Thermal Testing of Improvised Explosives

NASA Astrophysics Data System (ADS)

Reynolds, John; Sandstrom, Mary; Brown, Geoffrey; Warner, Kirstin; Phillips, Jason; Shelley, Timothy; Reyes, Jose; Hsu, Peter

2013-06-01

One of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of improvised materials or HMEs to SSST testing, 18 HME materials were compared to 3 standard military explosives in a proficiency-type round robin study among five laboratories--2 DoD and 3 DOE--sponsored by DHS. The testing matrix has been designed to address problems encountered with improvised materials--powder mixtures, liquid suspensions, partially wetted solids, immiscible liquids, and reactive materials. Over 30 issues have been identified that indicate standard test methods may require modification when applied to HMEs to derive accurate sensitivity assessments needed for development safe handling and storage practices. This presentation will discuss experimental difficulties encountered when testing these problematic samples, show inter-laboratory testing results, show some statistical interpretation of the results, and highlight some of the testing issues. Some of the work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. LLNL-ABS-617519 (721812).

DHS small-scale safety and thermal testing of improvised explosives-comparison of testing performance

NASA Astrophysics Data System (ADS)

Reynolds, J. G.; Sandstrom, M. M.; Brown, G. W.; Warner, K. F.; Phillips, J. J.; Shelley, T. J.; Reyes, J. A.; Hsu, P. C.

2014-05-01

One of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of improvised materials or homemade explosives (HMEs) to SSST testing, 16 HME materials were compared to three standard military explosives in a proficiency-type round robin study among five laboratories-two DoD and three DOE-sponsored by DHS. The testing matrix has been designed to address problems encountered with improvised materials-powder mixtures, liquid suspensions, partially wetted solids, immiscible liquids, and reactive materials. More than 30 issues have been identified that indicate standard test methods may require modification when applied to HMEs to derive accurate sensitivity assessments needed for developing safe handling and storage practices. This paper presents a generalized comparison of the results among the testing participants, comparison of friction results from BAM (German Bundesanstalt für Materi-alprüfung) and ABL (Allegany Ballistics Laboratory) designed testing equipment, and an overview of the statistical results from the RDX (1,3,5-Trinitroperhydro-1,3,5-triazine) standard tested throughout the proficiency test.

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

Position of the American Dietetic Association: food irradiation.

PubMed

Wood, O B; Bruhn, C M

2000-02-01

Food irradiation has been identified a sa safe technology to reduce the risk of foodborne illness as part of high-quality food production, processing, handling, and preparation. Food irradiation's history of scientific research , evaluation, and testing spans more than 40 countries around the world and it has been endorsed or support by numerous national and international food and organizations and professional groups. Food irradiation utilizes a source of ionizing energy that passes through food to destroy harmful bacteria and other organism. Often referred to as "cold pasteurization," food irradiation offers negligible loss of nutrients or sensory qualities in food as it does not substantially raise the temperature of the food during processing. Food irradiation does not replace proper food production, processing, handling, or preparation, nor can it enhance the quality of or prevent contact with foodborne bacteria after irradiation. In the United States, manufacturers are required to identify irradiated food sold to consumers with an international symbol (Radura) and and terminology describing the process on product labels. In addiction, food irradiation facilities are thoroughly regulated and monitored for worker and environmental safety. Members of The American Dietetic Association (ADA) and other food, nutrition, and health professionals have a responsibility to educate consumers, food processors, manufacturers and retailers about the safety and application of the technology. When consumers are educated about food irradiation, many prefer irradiated products because of their increased safety. It is the position of ADA that food irradiation enhances the safety and quality of the food supply and helps protect consumers from foodborne illness. The ADA encourages the government, food manufactures, food commodity groups, and qualified food and nutrition professionals to work together to educate consumers about this additional food safety tool and make this choice available in the marketplace.

Electrostatic application of antimicrobial sprays to sanitize food handling and processing surfaces for enhanced food safety

NASA Astrophysics Data System (ADS)

Lyons, Shawn M.; Harrison, Mark A.; Law, S. Edward

2011-06-01

Human illnesses and deaths caused by foodborne pathogens (e.g., Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7, etc.) are of increasing concern globally in maintaining safe food supplies. At various stages of the food production, processing and supply chain antimicrobial agents are required to sanitize contact surfaces. Additionally, during outbreaks of contagious pathogenic microorganisms (e.g., H1N1 influenza), public health requires timely decontamination of extensive surfaces within public schools, mass transit systems, etc. Prior publications verify effectiveness of air-assisted, induction-charged (AAIC) electrostatic spraying of various chemical and biological agents to protect on-farm production of food crops...typically doubling droplet deposition efficiency with concomitant increases in biological control efficacy. Within a biosafety facility this present work evaluated the AAIC electrostatic-spraying process for application of antimicrobial liquids onto various pathogen-inoculated food processing and handling surfaces as a food safety intervention strategy. Fluoroanalysis of AAIC electrostatic sprays (-7.2 mC/kg charge-to-mass ratio) showed significantly greater (p<0.05) mass of tracer active ingredient (A.I.) deposited onto target surfaces at various orientations as compared both to a similar uncharged spray nozzle (0 mC/kg) and to a conventional hydraulic-atomizing nozzle. Per unit mass of A.I. dispensed toward targets, for example, A.I. mass deposited by AAIC electrostatic sprays onto difficult to coat backsides was 6.1-times greater than for similar uncharged sprays and 29.0-times greater than for conventional hydraulic-nozzle sprays. Even at the 56% reduction in peracetic acid sanitizer A.I. dispensed by AAIC electrostatic spray applications, they achieved equal or greater CFU population reductions of Salmonella on most target orientations and materials as compared to uncharged sprays and conventional full-rate hydraulic-nozzle sprays.

An aqueous rechargeable formate-based hydrogen battery driven by heterogeneous Pd catalysis.

PubMed

Bi, Qing-Yuan; Lin, Jian-Dong; Liu, Yong-Mei; Du, Xian-Long; Wang, Jian-Qiang; He, He-Yong; Cao, Yong

2014-12-01

The formate-based rechargeable hydrogen battery (RHB) promises high reversible capacity to meet the need for safe, reliable, and sustainable H2 storage used in fuel cell applications. Described herein is an additive-free RHB which is based on repetitive cycles operated between aqueous formate dehydrogenation (discharging) and bicarbonate hydrogenation (charging). Key to this truly efficient and durable H2 handling system is the use of highly strained Pd nanoparticles anchored on graphite oxide nanosheets as a robust and efficient solid catalyst, which can facilitate both the discharging and charging processes in a reversible and highly facile manner. Up to six repeated discharging/charging cycles can be performed without noticeable degradation in the storage capacity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Manual handling risks associated with the care, treatment and transportation of bariatric patients and clients in Australia.

PubMed

Cowley, Stephen P; Leggett, Susan

2010-06-01

To gain an understanding of the factors that affect the risks and the adoption of risk control measures during the care of bariatric patients, focus groups were conducted in rural and metropolitan locations in Australia. It was found that the manual handling injury risk to carers is influenced by the design of the environments within which patient movement is undertaken; the limited range of handling equipment available for use with bariatric patients; and the efficacy of organizational procedures and training. Adoption of risk controls is hampered by the absence of a standard definition of the term 'bariatric' and limitations in the use of weight and body mass index in definitions. There are gaps in information flow during the bariatric patient journey through the health-care system and a lack of knowledge about how to safely manage the unique needs of bariatric patients.

Development and perceived effects of an educational programme on quality and safety in medication handling in residential facilities.

PubMed

Mygind, Anna; El-Souri, Mira; Rossing, Charlotte; Thomsen, Linda Aagaard

2018-04-01

To develop and test an educational programme on quality and safety in medication handling for staff in residential facilities for the disabled. The continuing pharmacy education instructional design model was used to develop the programme with 22 learning objectives on disease and medicines, quality and safety, communication and coordination. The programme was a flexible, modular seven + two days' course addressing quality and safety in medication handling, disease and medicines, and medication supervision and reconciliation. The programme was tested in five Danish municipalities. Municipalities were selected based on their application for participation; each independently selected a facility for residents with mental and intellectual disabilities, and a facility for residents with severe mental illnesses. Perceived effects were measured based on a questionnaire completed by participants before and after the programme. Effects on motivation and confidence as well as perceived effects on knowledge, skills and competences related to medication handling, patient empowerment, communication, role clarification and safety culture were analysed conducting bivariate, stratified analyses and test for independence. Of the 114 participants completing the programme, 75 participants returned both questionnaires (response rate = 66%). Motivation and confidence regarding quality and safety in medication handling significantly improved, as did perceived knowledge, skills and competences on 20 learning objectives on role clarification, safety culture, medication handling, patient empowerment and communication. The programme improved staffs' motivation and confidence and their perceived ability to handle residents' medication safely through improved role clarification, safety culture, medication handling and patient empowerment and communication skills. © 2017 Royal Pharmaceutical Society.

Potential exposure to Australian bat lyssavirus is unlikely to prevent future bat handling among adults in South East Queensland.

PubMed

Young, M K; Banu, S; McCall, B J; Vlack, S; Carroll, H; Bennett, S; Davison, R; Francis, D

2018-02-01

Despite ongoing public health messages about the risks associated with bat contact, the number of potential exposures to Australian bat lyssavirus (ABLV) due to intentional handling by members of the general public in Queensland has remained high. We sought to better understand the reasons for intentional handling among these members of the public who reported their potential exposure to inform future public health messages. We interviewed adults who resided in a defined geographic area in South East Queensland and notified potential exposure to ABLV due to intentional handling of bats by telephone between 1 January 2012 and 31 December 2013. The participation rate was 54%. Adults who reported they had intentionally handled bats in South East Queensland indicated high levels of knowledge and perception of a moderately high risk associated with bats with overall low intentions to handle bats in the future. However, substantial proportions of people would attempt to handle bats again in some circumstances, particularly to protect their children or pets. Fifty-two percent indicated that they would handle a bat if a child was about to pick up or touch a live bat, and 49% would intervene if a pet was interacting with a bat. Future public health communications should recognize the situations in which even people with highrisk perceptions of bats will attempt to handle them. Public health messages currently focus on avoidance of bats in all circumstances and recommend calling in a trained vaccinated handler, but messaging directed at adults for circumstances where children or pets may be potentially exposed should provide safe immediate management options. © 2017 Blackwell Verlag GmbH.

Processes and outcomes of the veterans health administration safe patient handling program: study protocol.

PubMed

Rugs, Deborah; Toyinbo, Peter; Patel, Nitin; Powell-Cope, Gail; Hahm, Bridget; Elnitsky, Christine; Besterman-Dahan, Karen; Campbell, Robert; Sutton, Bryce

2013-11-18

Health care workers, such as nurses, nursing aides, orderlies, and attendants, who manually move patients, are consistently listed in the top professions for musculoskeletal injuries (MSIs) by the Bureau of Labor Statistics. These MSIs are typically caused by high-risk patient caregiving activities. In 2008, a safe patient handling (SPH) program was implemented in all 153 Veterans Administration Medical Centers (VAMCs) throughout the United States to reduce patient handling injuries. The goal of the present study is to evaluate the effects associated with the national implementation of a comprehensive SPH program. The primary objectives of the research were to determine the effectiveness of the SPH program in improving direct care nursing outcomes and to provide a context for understanding variations in program results across sites over time. Secondary objectives of the present research were to evaluate the effectiveness of the program in reducing direct and indirect costs associated with patient handling, to explore the potential mediating and moderating mechanisms, and to identify unintended consequences of implementing the program. This 3-year longitudinal study used mixed methods of data collection at 6- to 9-month intervals. The analyses will include data from surveys, administrative databases, individual and focus group interviews, and nonparticipant observations. For this study, a 3-tiered measurement plan was used. For Tier 1, the unit of analysis was the facility, the data source was the facility coordinator or administrative data, and all 153 VAMCs participated. For Tier 2, frontline caregivers and program peer leaders at 17 facilities each completed different surveys. For Tier 3, six facilities completed qualitative site visits, which included individual interviews, focus groups, and nonparticipant observations. Multiple regression models were proposed to test the effects of SPH components on nursing outcomes related to patient handling. Content analysis and constant comparative analysis were proposed for qualitative data analysis to understand the context of implementation and to triangulate quantitative data. All three tiers of data for this study have been collected. We are now in the analyses and writing phase of the project, with the possibility for extraction of additional administrative data. The focus of this paper is to describe the SPH program, its evaluation study design, and its data collection procedures. This study evaluates the effects associated with the national implementation of a comprehensive SPH program that was implemented in all 153 VAMCs throughout the United States to reduce patient handling injuries. To our knowledge, this is the largest evaluation of an SPH program in the United States. A major strength of this observational study design is that all VAMCs implemented the program and were included in Tier 1 of the study; therefore, population sampling bias is not a concern. Although the design lacks a comparison group for testing program effects, this longitudinal field study design allows for capturing program dose-response effects within a naturalistic context. Implementation of the VA-wide SPH program afforded the opportunity for rigorous evaluation in a naturalistic context. Findings will guide VA operations for policy and decision making about resources, and will be useful for health care, in general, outside of the VA, in implementation and impact of an SPH program.

The Law of Communicable Diseases Act and disclosure to sexual partners among HIV-positive youth.

PubMed

Christiansen, Monica; Lalos, Ann; Johansson, Eva E

2008-12-01

In Sweden, human immunodeficiency virus (HIV) is included among the venereal diseases covered by the Law of Communicable Diseases Act. HIV-positive (HIV(+)) people are required to inform their sexual partners about their infection and adopt safe sex behaviours. However, it is unclear how the law is perceived. This study explores how HIV(+) youth in Sweden perceive the law, handle their sexuality and disclose their HIV diagnosis to sexual partners. Ten HIV(+) women and men between 17 and 24 years of age were recruited from three different HIV infection clinics. These participants were interviewed in depth. The interviews were tape-recorded, transcribed verbatim and analysed according to a grounded theory approach. The core category-cultured to take responsibility-illuminates the informants' double-edged experiences regarding the law and how they handle disclosure to sexual partners. The legislation implies both support and burden for these HIV(+) youth; they feel that they have a great deal of responsibility, sometimes more than they can handle. 'Switch off lust', 'balancing lust, fear and obedience' and 'switch off the disease' are strategies that describe how the informants manage sexuality and disclosure. Young HIV(+) people have a difficult time informing partners of their HIV diagnosis and discussing safe sex strategies. These are challenges that health care providers need to take seriously. HIV(+) youth need better communication strategies to negotiate safer sex. Staff with extended education on sexuality should be a part of HIV health care.

Salient Features and Outline of the Joint Japanese Guidelines for Safe Handling of Cancer Chemotherapy Drugs

PubMed Central

Kanda, Kiyoko; Hirai, Kazue; Iino, Keiko; Nomura, Hisanaga; Yasui, Hisateru; Kano, Taro; Ichikawa, Chisato; Hiura, Sumiko; Morita, Tomoko; Mitsuma, Ayako; Komatsu, Hiroko

2017-01-01

The purpose of this paper is to introduce the outline and describe the salient features of the “Joint Guidelines for Safe Handling of Cancer Chemotherapy Drugs” (hereinafter, “Guideline”), which were published in July 2015. The purpose of this Guideline is to provide guidance to protect against occupational exposure to hazardous drugs (HDs) to all medical personnel involved in cancer chemotherapy, including physicians, pharmacists, and nurses and home health-care providers. The Guideline was developed according to the Medical Information Network Distribution Service guidance for developing clinical practice guidelines, with reference to five authoritative guidelines used worldwide. PubMed, Cumulative Index to Nursing and Allied Health Literature, Ichushi-Web, and Cochrane Central Register of Controlled Trials were used for a systematic search of the literature. Eight clinical questions (CQs) were eventually established, and the strength of recommendation for each CQ is presented based on 867 references. The salient features of the Guideline are that it was jointly developed by three societies (Japanese Society of Cancer Nursing, Japanese Society of Medical Oncology, and Japanese Society of Pharmaceutical Oncology), contains descriptions including the definition of HDs and the concept of hierarchy of controls, and addresses exposure control measures during handling of chemotherapy drugs. Our future task is to collect additional evidence for the recommended exposure control measures and to assess whether publication of the Guideline has led to adherence of measures to prevent occupational exposure. PMID:28966958

The Law of Communicable Diseases Act and disclosure to sexual partners among HIV-positive youth

PubMed Central

Christiansen, Monica; Lalos, Ann; Johansson, Eva. E.

2008-01-01

In Sweden, human immunodeficiency virus (HIV) is included among the venereal diseases covered by the Law of Communicable Diseases Act. HIV-positive (HIV+) people are required to inform their sexual partners about their infection and adopt safe sex behaviours. However, it is unclear how the law is perceived. This study explores how HIV+ youth in Sweden perceive the law, handle their sexuality and disclose their HIV diagnosis to sexual partners. Ten HIV+ women and men between 17 and 24 years of age were recruited from three different HIV infection clinics. These participants were interviewed in depth. The interviews were tape-recorded, transcribed verbatim and analysed according to a grounded theory approach. The core category—cultured to take responsibility—illuminates the informants’ double-edged experiences regarding the law and how they handle disclosure to sexual partners. The legislation implies both support and burden for these HIV+ youth; they feel that they have a great deal of responsibility, sometimes more than they can handle. ‘Switch off lust’, ‘balancing lust, fear and obedience’ and ‘switch off the disease’ are strategies that describe how the informants manage sexuality and disclosure. Young HIV+ people have a difficult time informing partners of their HIV diagnosis and discussing safe sex strategies. These are challenges that health care providers need to take seriously. HIV+ youth need better communication strategies to negotiate safer sex. Staff with extended education on sexuality should be a part of HIV health care. PMID:22639678

Monitoring Moving Queries inside a Safe Region

PubMed Central

Al-Khalidi, Haidar; Taniar, David; Alamri, Sultan

2014-01-01

With mobile moving range queries, there is a need to recalculate the relevant surrounding objects of interest whenever the query moves. Therefore, monitoring the moving query is very costly. The safe region is one method that has been proposed to minimise the communication and computation cost of continuously monitoring a moving range query. Inside the safe region the set of objects of interest to the query do not change; thus there is no need to update the query while it is inside its safe region. However, when the query leaves its safe region the mobile device has to reevaluate the query, necessitating communication with the server. Knowing when and where the mobile device will leave a safe region is widely known as a difficult problem. To solve this problem, we propose a novel method to monitor the position of the query over time using a linear function based on the direction of the query obtained by periodic monitoring of its position. Periodic monitoring ensures that the query is aware of its location all the time. This method reduces the costs associated with communications in client-server architecture. Computational results show that our method is successful in handling moving query patterns. PMID:24696652

9 CFR 318.18 - Handling of certain material for mechanical processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Handling of certain material for mechanical processing. 318.18 Section 318.18 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... PREPARATION OF PRODUCTS General § 318.18 Handling of certain material for mechanical processing. Material to...

Is your lunch salad safe to eat? Occurrence of bacterial pathogens and potential for pathogen growth in pre-packed ready-to-eat mixed-ingredient salads.

PubMed

Söderqvist, Karin

2017-01-01

As part of a trend toward healthy convenience foods, ready-to-eat (RTE) mixed-ingredient salads have become popular products among consumers. A mixed-ingredient salad contains combinations of raw ( e.g . leafy vegetables and tomatoes) and processed ( e.g . chicken, salmon, ham, pasta and couscous) ingredients. Contamination of leafy vegetables can occur during any step in the production chain and, since there is no step that kills pathogens, a completely safe final product can never be guaranteed. Meat ingredients, for example poultry meat and ham, are generally heat-treated before preparation, but may be contaminated after this treatment, e.g . when diced or sliced. When several ingredients are mixed together, cross-contamination may occur. Preparation of mixed-ingredient salads requires human handling, which presents an additional risk of bacterial contamination. With high-protein ingredients, e.g . cooked meat, the mixed-ingredient salad represents an excellent substrate for bacterial growth. This article reviews current knowledge regarding human bacterial pathogen prevalence in mixed-ingredient salads and the potential for pathogen growth in this product during storage.

Is your lunch salad safe to eat? Occurrence of bacterial pathogens and potential for pathogen growth in pre-packed ready-to-eat mixed-ingredient salads

PubMed Central

Söderqvist, Karin

2017-01-01

ABSTRACT As part of a trend toward healthy convenience foods, ready-to-eat (RTE) mixed-ingredient salads have become popular products among consumers. A mixed-ingredient salad contains combinations of raw (e.g. leafy vegetables and tomatoes) and processed (e.g. chicken, salmon, ham, pasta and couscous) ingredients. Contamination of leafy vegetables can occur during any step in the production chain and, since there is no step that kills pathogens, a completely safe final product can never be guaranteed. Meat ingredients, for example poultry meat and ham, are generally heat-treated before preparation, but may be contaminated after this treatment, e.g. when diced or sliced. When several ingredients are mixed together, cross-contamination may occur. Preparation of mixed-ingredient salads requires human handling, which presents an additional risk of bacterial contamination. With high-protein ingredients, e.g. cooked meat, the mixed-ingredient salad represents an excellent substrate for bacterial growth. This article reviews current knowledge regarding human bacterial pathogen prevalence in mixed-ingredient salads and the potential for pathogen growth in this product during storage. PMID:29230273

21 CFR 101.17 - Food labeling warning, notice, and safe handling statements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... any other labeling. (e) Dietary supplements containing iron or iron salts. (1) The labeling of any dietary supplement in solid oral dosage form (e.g., tablets or capsules) that contains iron or iron salts... concentrating and inhaling the contents can be harmful or fatal. (2) The warning required by paragraph (b)(1) of...

21 CFR 101.17 - Food labeling warning, notice, and safe handling statements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... any other labeling. (e) Dietary supplements containing iron or iron salts. (1) The labeling of any dietary supplement in solid oral dosage form (e.g., tablets or capsules) that contains iron or iron salts... concentrating and inhaling the contents can be harmful or fatal. (2) The warning required by paragraph (b)(1) of...

21 CFR 101.17 - Food labeling warning, notice, and safe handling statements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... any other labeling. (e) Dietary supplements containing iron or iron salts. (1) The labeling of any dietary supplement in solid oral dosage form (e.g., tablets or capsules) that contains iron or iron salts... concentrating and inhaling the contents can be harmful or fatal. (2) The warning required by paragraph (b)(1) of...

21 CFR 101.17 - Food labeling warning, notice, and safe handling statements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING General Provisions § 101.17 Food labeling..., or are sold for use in food service establishments, may be provided on cartons or in labeling, e.g... the Public Health Service Act (PHS Act), any State or locality that is willing and able to assist the...

Agricultural Chemical and Pesticide Hazards. Module SH-50. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on agricultural chemical and pesticide hazards is one of 50 modules concerned with job safety and health. This module contains information concerning the safe handling, use, and storage of many chemicals that are frequently used in the control of pests. Following the introduction, 10 objectives (each keyed to a page in the…

21 CFR 101.17 - Food labeling warning, notice, and safe handling statements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... bear the following warning: WARNING—Avoid spraying in eyes. Contents under pressure. Do not puncture or... warning required by paragraph (a)(1) of this section. (4) The words “Avoid spraying in eyes” may be... containing dry or incompletely hydrated psyllium husk, also known as psyllium seed husk, and bearing a health...

Schools with Special Needs Students Connect with Parents in a Crisis

ERIC Educational Resources Information Center

Cancro, Lorraine

2009-01-01

Long gone are the days of parent phone chains. Today, faster communications and instant alerts for any situation can empower school administrators to handle difficult events and put parent concerns at ease with better prepared school safety management. Keeping students safe and families informed in an increasingly uncertain world is a top priority…

Learning in the Absence of Direct Supervision: Person-Dependent Scaffolding

ERIC Educational Resources Information Center

Palesy, Debra

2017-01-01

Contemporary accounts of learning emphasise the importance of immediate social partners such as teachers and co-workers. Yet, much of our learning for work occurs without such experts. This paper provides an understanding of how and why new home care workers use scaffolding to learn and enact safe manual handling techniques in their workplaces,…

Financial Accounting for School Activities. Bulletin, 1959, No. 21

ERIC Educational Resources Information Center

Samuelson, Everett V., Comp.; Tankard, George G., Jr., Comp.; Pope, Hoyt, W., Comp.

1959-01-01

This handbook is a guide to accounting for school activity funds. It is designed for use by individual schools and school systems throughout the United States. The project was undertaken to meet the increasing concern of State and local school officials and the general public for safe ands economical handling of school activity money which amounts…

Locksmith: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5008.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2008

2008-01-01

The graduate of the Locksmith apprenticeship program is a certified journeyperson who will be able to: (1) apply the principles of Locksmithing; (2) handle orders of locks, safes and allied equipment; (3) operate and service the tools and machinery as used in the Locksmith trade; (4) perform the installation of locks and allied equipment; (5)…

40 CFR Appendix 6 to Subpart A of... - Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling...

Code of Federal Regulations, 2010 CFR

2010-07-01

... environment and a current awareness file of OSHA regulations regarding the safe handling of the chemicals... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Reverse Phase Extraction (RPE) Method... Part 435 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND...

76 FR 77214 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

... of fish as they are offloaded from a vessel; and who fills out dealer reports. Atlantic shark dealers... January 1, 2007, shark limited-access and swordfish limited- access permit holders who fish with longline... next permit renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited...

Food Safety Knowledge and Beliefs of Middle School Children: Implications for Food Safety Educators

ERIC Educational Resources Information Center

Byrd-Bredbenner, Carol; Abbot, Jaclyn Maurer; Quick, Virginia

2010-01-01

To create effective educational interventions that address the food safety informational needs of youth, a greater understanding of their knowledge and skills is needed. The purposes of this study were to explore, via focus groups, the food-handling responsibilities of middle school youth and obstacles they face in practicing safe food handling…

75 FR 54598 - Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-08

... workshop for September 9, 2010, to be held at the same time and location, 9 a.m. to 5 p.m., Comfort Inn (UNC Wilmington), 151 South College Road, Wilmington, NC 28403. DATES: The Atlantic Shark... CONTACT: Richard A. Pearson of the Highly Migratory Species Management Division at (727) 824-5399...

Living Lightly: Energy Conservation in Housing.

ERIC Educational Resources Information Center

Bender, Tom

This publication contains a series of papers which promote the concepts of energy conservation and offer safe and convenient ways of handling all aspects of our lives affected by energy without having to depend in any way on fossil fuels or nuclear power. These changes, which can be brought about in homes and in energy flows affected by the…

Dangerous Waste Characteristics of Contact-Handled Transuranic Mixed Wastes from Hanford Tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tingey, Joel M.; Bryan, Garry H.; Deschane, Jaquetta R.

2004-10-05

This report summarizes existing analytical data gleaned from samples taken from the Hanford tanks designated as potentially containing transuranic mixed process wastes. Process knowledge of the wastes transferred to these tanks has been reviewed to determine whether the dangerous waste characteristics now assigned to all Hanford underground storage tanks are applicable to these particular wastes. Supplemental technologies are being examined to accelerate the Hanford tank waste cleanup mission and accomplish waste treatment safely and efficiently. To date, 11 Hanford waste tanks have been designated as potentially containing contact-handled (CH) transuranic mixed (TRUM) wastes. The CH-TRUM wastes are found in single-shellmore » tanks B-201 through B-204, T-201 through T-204, T-104, T-110, and T-111. Methods and equipment to solidify and package the CH-TRUM wastes are part of the supplemental technologies being evaluated. The resulting packages and wastes must be acceptable for disposal at the Waste Isolation Pilot Plant (WIPP). The dangerous waste characteristics being considered include ignitability, corrosivity, reactivity, and toxicity arising from the presence of 2,4,5-trichlorophenol at levels above the dangerous waste threshold. The analytical data reviewed include concentrations of sulfur, sulfate, cyanide, 2,4,5-trichlorophenol, total organic carbon, and oxalate; the composition of the tank headspace, pH, and mercury. Differential scanning calorimetry results were used to determine the energetics of the wastes as a function of temperature. This report supercedes and replaces PNNL-14832.« less

Dangerous Waste Characteristics of Contact-Handled Transuranic Mixed Wastes from the Hanford Tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tingey, Joel M.; Bryan, Garry H.; Deschane, Jaquetta R.

2004-08-31

This report summarizes existing analytical data from samples taken from the Hanford tanks designated as potentially containing transuranic mixed process wastes. Process knowledge of the wastes transferred to these tanks has been reviewed to determine whether the dangerous waste characteristics now assigned to all Hanford underground storage tanks are applicable to these particular wastes. Supplemental technologies are being examined to accelerate the Hanford tank waste cleanup mission and accomplish waste treatment safely and efficiently. To date, 11 Hanford waste tanks have been designated as potentially containing contact-handled (CH) transuranic mixed (TRUM) wastes. The CH-TRUM wastes are found in single-shell tanksmore » B-201 through B-204, T-201 through T-204, T-104, T-110, and T-111. Methods and equipment to solidify and package the CH-TRUM wastes are part of the supplemental technologies being evaluated. The resulting packages and wastes must be acceptable for disposal at the Waste Isolation Pilot Plant (WIPP). The dangerous waste characteristics being considered include ignitability, corrosivity, reactivity, and toxicity arising from the presence of 2,4,5-trichlorophenol at levels above the dangerous waste threshold. The analytical data reviewed include concentrations of sulfur, sulfate, cyanide, 2,4,5-trichlorophenol, total organic carbon, and oxalate; the composition of the tank headspace, pH, and mercury. Differential scanning calorimetry results were used to determine the energetics of the wastes as a function of temperature.« less

[Risk assessment of manual handling of loads: the choice of reference values in light of Leg. 81/2008].

PubMed

Baracco, A; Coggiola, M; Discalzi, G; Perrelli, F; Romano, C

2009-01-01

Italian law on safety at work does not clarify specific levels of load for safe manual material handling. For this reason professionals appointed for safety need to define new target range value for the correct application of D.Lgs. 81/2008 law. Authors, discussing about indication of the national laws and international rules, suggest the assumption of a load of 25 and 20 kg as reference values for male and female adult and healthy workers. They also examine the graduation of the acceptable loads in relation to workers' age and the Lifting Index values to be adopted as action limit and exposure limit.

Tracer sensitive tapes

NASA Technical Reports Server (NTRS)

Burrows, W. H.; Burrows, W. H.

1971-01-01

A leak detection system has been developed, consisting of a tape that can be wrapped around possible leak sites on a system pressurized with air or gaseous nitrogen. Carbon monoxide, at a level of 100 to 1000 parts per million is used as a trace gas in the pressurized system. The sensitive element of the tape is palladium chloride supported on specially prepared silica gel and specially dried. At a CO level of 100 ppm and a leak rate of 10-20 ml/hr, discoloration of the sensitive element is observed in 1.5 to 3 min. The tape and trace gas are compatible with aerospace hardware, safe to handle, and economically reasonable to produce and handle.

Use of piezosurgery for internal auditory canal drilling in acoustic neuroma surgery.

PubMed

Grauvogel, Juergen; Scheiwe, Christian; Kaminsky, Jan

2011-10-01

Piezosurgery is based on microvibrations generated by the piezoelectrical effect and has a selective bone-cutting ability with preservation of soft tissue. This study examined the applicability of Piezosurgery compared to rotating drills (RD) for internal auditory canal (IAC) opening in acoustic neuroma (AN) surgery. Piezosurgery was used in eight patients for IAC drilling in AN surgery. After exposition of the IAC and tumor, the posterior wall of the IAC was drilled using Piezosurgery instead of RD. Piezosurgery was evaluated with respect to practicability, safety, preciseness of bone cutting, preservation of cranial nerves, influences on neurophysiological monitoring, and facial nerve and hearing outcome. Piezosurgery was successfully used for selective bone cutting, while cranial nerves were structurally and functionally preserved, which could be measured by means of neuromonitoring. Piezosurgery guaranteed a safe and precise cut by removing bone layer by layer in a shaping way. Compared to RD, limited influence on neurophysiological monitoring attributable to Piezosurgery was noted, allowing for continuous neuromonitoring. No disadvantage due to microvibrations was noticed concerning hearing function. The angled tip showed better handling in right-sided than in left-sided tumors in the hands of a right-handed surgeon. The short, thick handpiece may be improved for more convenient handling. Piezosurgery is a safe tool for selective bone cutting for opening of the IAC with preservation of facial nerve and hearing function in AN surgery. Piezosurgery has the potential to replace RD for this indication because of its safe and precise bone-cutting properties.

Zebrafish reproduction: revisiting in vitro fertilization to increase sperm cryopreservation success.

PubMed

Hagedorn, Mary; Carter, Virginia L

2011-01-01

Although conventional cryopreservation is a proven method for long-term, safe storage of genetic material, protocols used by the zebrafish community are not standardized and yield inconsistent results, thereby putting the security of many genotypes in individual laboratories and stock centers at risk. An important challenge for a successful zebrafish sperm cryopreservation program is the large variability in the post-thaw in vitro fertilization success (0 to 80%). But how much of this variability was due to the reproductive traits of the in vitro fertilization process, and not due to the cryopreservation process? These experiments only assessed the in vitro process with fresh sperm, but yielded the basic metrics needed for successful in vitro fertilization using cryopreserved sperm, as well. We analyzed the reproductive traits for zebrafish males with a strict body condition range. It did not correlate with sperm volume, or motility (P>0.05), but it did correlate with sperm concentration. Younger males produced more concentrated sperm (P<0.05). To minimize the wastage of sperm during the in vitro fertilization process, 10(6) cells/ml was the minimum sperm concentration needed to achieve an in vitro fertilization success of ≥ 70%. During the in vitro process, pooling sperm did not reduce fertilization success (P>0.05), but pooling eggs reduced it by approximately 30 to 50% (P<0.05). This reduction in fertilization success was due not to the pooling of the females' eggs, but to the type of tools used to handle the eggs. Recommendations to enhance the in vitro process for zebrafish include: 1) using males of a body condition closer to 1.5 for maximal sperm concentration; 2) minimizing sperm wastage by using a working sperm concentration of 10(6) motile cells/ml for in vitro fertilization; and 3) never using metal or sharp-edged tools to handle eggs prior to fertilization.

Zebrafish Reproduction: Revisiting In Vitro Fertilization to Increase Sperm Cryopreservation Success

PubMed Central

Hagedorn, Mary; Carter, Virginia L.

2011-01-01

Although conventional cryopreservation is a proven method for long-term, safe storage of genetic material, protocols used by the zebrafish community are not standardized and yield inconsistent results, thereby putting the security of many genotypes in individual laboratories and stock centers at risk. An important challenge for a successful zebrafish sperm cryopreservation program is the large variability in the post-thaw in vitro fertilization success (0 to 80%). But how much of this variability was due to the reproductive traits of the in vitro fertilization process, and not due to the cryopreservation process? These experiments only assessed the in vitro process with fresh sperm, but yielded the basic metrics needed for successful in vitro fertilization using cryopreserved sperm, as well. We analyzed the reproductive traits for zebrafish males with a strict body condition range. It did not correlate with sperm volume, or motility (P>0.05), but it did correlate with sperm concentration. Younger males produced more concentrated sperm (P<0.05). To minimize the wastage of sperm during the in vitro fertilization process, 106 cells/ml was the minimum sperm concentration needed to achieve an in vitro fertilization success of ≥ 70%. During the in vitro process, pooling sperm did not reduce fertilization success (P>0.05), but pooling eggs reduced it by approximately 30 to 50% (P<0.05). This reduction in fertilization success was due not to the pooling of the females' eggs, but to the type of tools used to handle the eggs. Recommendations to enhance the in vitro process for zebrafish include: 1) using males of a body condition closer to 1.5 for maximal sperm concentration; 2) minimizing sperm wastage by using a working sperm concentration of 106 motile cells/ml for in vitro fertilization; and 3) never using metal or sharp-edged tools to handle eggs prior to fertilization. PMID:21698162

The EuroNet paediatric hodgkin network - modern imaging data management for real time central review in multicentre trials.

PubMed

Kurch, L; Mauz-Körholz, C; Bertling, S; Wallinder, M; Kaminska, M; Marwede, D; Tchavdarova, L; Georgi, T W; Elsner, A; Barthel, A; Stoevesandt, D; Hasenclever, D; Sattler, B; Sabri, O; Körholz, D; Kluge, R

2013-11-01

Since 2007, children and adolescents with Hodgkin lymphomas are treated in the Europe-wide EuroNet-PHL trials. A real time central review process for stratification of the patients enhances quality control and efficient therapy management. This process includes reading of all cross-sectional-images. Since reference evaluation is time critical, a fast, easy to handle and safe data transfer is important. In addition, immediate and constant access to all the data has to be guaranteed in case of queries and for regulatory reasons. To meet the mentioned requirements the EuroNet Paediatric Hodgkin Data Network (funded by the European Union - Project Number: 2007108) was established between 2008 and 2011. A respective tailored data protection plan was formulated. The aim of this article is to describe the networks' mode of operation and the advantages for multi-centre trials that include centralized image review. © Georg Thieme Verlag KG Stuttgart · New York.

Emerging role of phenolic compounds as natural food additives in fish and fish products.

PubMed

Maqsood, Sajid; Benjakul, Soottawat; Shahidi, Fereidoon

2013-01-01

Chemical and microbiological deteriorations are principal causes of quality loss of fish and fish products during handling, processing, and storage. Development of rancid odor and unpleasant flavor, changes of color and texture as well as lowering nutritional value in fish can be prevented by appropriate use of additives. Due to the potential health hazards of synthetic additives, natural products, especially antioxidants and antimicrobial agents, have been intensively examined as safe alternatives to synthetic compounds. Polyphenols (PP) are the natural antioxidants prevalent in fruits, vegetables, beverages (tea, wine, juices), plants, seaweeds, and some herbs and show antioxidative and antimicrobial activities in different fish and fish products. The use of phenolic compounds also appears to be a good alternative for sulphiting agent for retarding melanosis in crustaceans. Phenolic compounds have also been successfully employed as the processing aid for texture modification of fish mince and surimi. Thus, plant polyphenolic compounds can serve as potential additives for preventing quality deterioration or to retain the quality of fish and fish products.

Employee and customer handling of nicotine-containing e-liquids in vape shops.

PubMed

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2016-01-01

Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers.

Long-term efficacy of an ergonomics program that includes patient-handling devices on reducing musculoskeletal injuries to nursing personnel.

PubMed

Garg, Arun; Kapellusch, Jay M

2012-08-01

The aim of this study was to evaluate long-term efficacy of an ergonomics program that included patient-handling devices in six long-term care facilities (LTC) and one chronic care hospital (CCH). Patient handling is recognized as a major source of musculoskeletal disorders (MSDs) among nursing personnel, and several studies have demonstrated effectiveness of patient-handling devices in reducing those MSDs. However, most studies have been conducted in a single facility, for a short period, and/or without a comprehensive ergonomics program. Patient-handling devices along with a comprehensive ergonomics program was implemented in six LTC facilities and one CCH. Pre- and postintervention injury data were collected for 38.9 months (range = 29 to 54 months) and 51.2 months (range = 36 to 60 months), respectively. Postintervention patient-handling injuries decreased by 59.8% (rate ratio [RR] = 0.36, 95% confidence interval [CI] [0.28, 0.49], p < .001), lost workdays by 86.7% (RR = 0.16, 95% CI [0.13, 0.18], p < .001), modified-duty days by 78.8% (RR = 0.25, 95% CI [0.22, 0.28], p < .001), and workers' compensation costs by 90.6% (RR = 0.12, 95% CI [0.09, 0.15], p < .001). Perceived stresses to low back and shoulders among nursing staff were fairly low. A vast majority of patients found the devices comfortable and safe. Longer transfer times with the use of devices was not an issue. Implementation of patient-handling devices along with a comprehensive program can be effective in reducing MSDs among nursing personnel. Strategies to expand usage of patient-handling devices in most health care settings should be explored.

Employee and customer handling of nicotine-containing e-liquids in vape shops

PubMed Central

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. METHODS Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. RESULTS Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. CONCLUSIONS Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers. PMID:28660255

Routine handling methods affect behaviour of three-spined sticklebacks in a novel test of anxiety.

PubMed

Thompson, Ralph R J; Paul, Elizabeth S; Radford, Andrew N; Purser, Julia; Mendl, Michael

2016-06-01

Fish are increasingly popular subjects in behavioural and neurobiological research. It is therefore important that they are housed and handled appropriately to ensure good welfare and reliable scientific findings, and that species-appropriate behavioural tests (e.g. of cognitive/affective states) are developed. Routine handling of captive animals may cause physiological stress responses that lead to anxiety-like states (e.g. increased perception of danger). In fish, these may be particularly pronounced when handling during tank-to-tank transfer involves removal from water into air. Here we develop and use a new combined scototaxis (preference for dark over light areas) and novel-tank-diving test, alongside conventional open-field and novel-object tests, to measure the effects of transferring three-spined sticklebacks (Gasterosteus aculeatus) between tanks using a box or net (in and out of water respectively). Preference tests for dark over light areas confirmed the presence of scototaxis in this species. Open-field and novel-object tests failed to detect any significant differences between net and box-handled fish. However, the combined diving and scototaxis detected consistent differences between the treatments. Net-handled fish spent less time on the dark side of the tank, less time in the bottom third, and kept a greater distance from the 'safe' bottom dark area than box-handled fish. Possible explanations for this reduction in anxiety-like behaviour in net-handled fish are discussed. The combined diving and scototaxis test may be a sensitive and taxon-appropriate method for measuring anxiety-like states in fish. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

7 CFR 926.9 - Handle.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current of...

7 CFR 926.9 - Handle.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current of...

7 CFR 926.9 - Handle.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current of...

7 CFR 926.9 - Handle.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current of...

Staphylococcus aureus and Staphylococcal Food-Borne Disease: An Ongoing Challenge in Public Health

PubMed Central

Smith, Tara C.

2014-01-01

Staphylococcal food-borne disease (SFD) is one of the most common food-borne diseases worldwide resulting from the contamination of food by preformed S. aureus enterotoxins. It is one of the most common causes of reported food-borne diseases in the United States. Although several Staphylococcal enterotoxins (SEs) have been identified, SEA, a highly heat-stable SE, is the most common cause of SFD worldwide. Outbreak investigations have found that improper food handling practices in the retail industry account for the majority of SFD outbreaks. However, several studies have documented prevalence of S. aureus in many food products including raw retail meat indicating that consumers are at potential risk of S. aureus colonization and subsequent infection. Presence of pathogens in food products imposes potential hazard for consumers and causes grave economic loss and loss in human productivity via food-borne disease. Symptoms of SFD include nausea, vomiting, and abdominal cramps with or without diarrhea. Preventive measures include safe food handling and processing practice, maintaining cold chain, adequate cleaning and disinfection of equipment, prevention of cross-contamination in home and kitchen, and prevention of contamination from farm to fork. This paper provides a brief overview of SFD, contributing factors, risk that it imposes to the consumers, current research gaps, and preventive measures. PMID:24804250

Use of electronic group method in assessing food safety training needs and delivery methods among international college students in the U.S.

PubMed

Garden-Robinson, Julie; Eighmy, Myron A; Lyonga, Agnes Ngale

2010-12-01

The purpose of this study was to determine the types of unfamiliar foods international students in the U.S. encounter and to assess food safety information that international students would like to receive for mitigating risks associated with handling and preparing unfamiliar foods. The study identified preferred instructional delivery methods and media for receiving food safety training or information. An electronic group method was used for this study. The electronic group method was chosen to maximize group efficiency by allowing participants to share ideas simultaneously and anonymously with minimal use of time and resources.Types of different (unfamiliar) foods were grouped into major categories. Fast and ready-to-eat foods, and processed and frozen foods constituted a major change for some international students, who were accustomed to homemade and fresh foods in their countries. Participants were interested in receiving information about how to safely handle and prepare unfamiliar foods in their new environment. Preferred methods for receiving food safety information included written materials, online publications, presentations, and materials provided during student orientation. Food packages, websites, and television programs were other preferred methods of receiving food safety information. Copyright © 2010 Elsevier Ltd. All rights reserved.

Safety for Compressed Gas and Air Equipment. Module SH-26. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety for compressed gas and air equipment is one of 50 modules concerned with job safety and health. This module presents technical data about commonly used gases and stresses the procedures necessary for safe handling of compressed gases. Following the introduction, 14 objectives (each keyed to a page in the text) the…

SEPARATING LIQUID MODERATOR FROM A SLURRY TYPE REACTOR

DOEpatents

Vernon, H.C.

1961-07-01

A system for evaporating moderator such as D/sub 2/O from an irradiated slurry or sloution characterized by two successive evaproators is described. In the first of these the most troublesome radioactivity dissipates before the slurry becomes too thick to be pumped out; in the second the slurry, now easier to handle, can be safely reduced to a sludge.

Explosive simulants for testing explosive detection systems

DOEpatents

Kury, John W.; Anderson, Brian L.

1999-09-28

Explosives simulants that include non-explosive components are disclosed that facilitate testing of equipment designed to remotely detect explosives. The simulants are non-explosive, non-hazardous materials that can be safely handled without any significant precautions. The simulants imitate real explosives in terms of mass density, effective atomic number, x-ray transmission properties, and physical form, including moldable plastics and emulsions/gels.

An inventory of multipurpose avenue trees of urban Chandigarh, India

Treesearch

R. K. Kohli; H. P. Singh; Daizy R. Batish

2000-01-01

Trees in urban ecosystems play a very significant role in environmental protection by checking air and noise pollutants, abating wind, and handling many other functions, in India, Chandigarh is the most modern and environmentally safe city and qualifies to be called a GREEN CITY because of its rich tree component. This is so in spite of its high population density,...

Strand IV: Environmental and Community Health. Environmental and Public Health, Grades 4-6. Special Edition for Evaluation and Discussion.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Elementary Curriculum Development.

This prototypic curriculum is designed to develop awareness of the challenges man faces in his crowded communities to insure clean water, pest control, waste removal, safe food handling and adequate community health facilities. It distinguishes between the prevention of future environmental abuse and compensation for past abuses. Both the gaining…

Resolving Conflict through Peer Mediation. A Series of Solutions and Strategies. Number 9.

ERIC Educational Resources Information Center

Rogers, Marie

Research confirms the fact that violence is a growing problem in American society. The frequency of reports of youth involved in violent acts reflects an inability to handle conflicts in safe, constructive ways among this age group. Although the business of schools is to educate, many students are more concerned with their own safety than…

Toward cellulose nanomaterial commercialization: knowledge gap analysis for safety data sheets according to the globally harmonized system

Treesearch

Jo Anne Shatkin; Kimberly J. Ong; James D. Ede; Theodore H. Wegner; Michael Goergen

2016-01-01

Commercialization of cellulose nanomaterials (CNs) is rapidly advancing, to the benefit of many end-use product sectors, and providing information about the safe manufacturing and handling for CNs is a priority. Safety Data Sheets (SDS) are required for industrially produced materials to communicate information on their potential health, fire, reactivity, and...

Safe Exploration Algorithms for Reinforcement Learning Controllers.

PubMed

Mannucci, Tommaso; van Kampen, Erik-Jan; de Visser, Cornelis; Chu, Qiping

2018-04-01

Self-learning approaches, such as reinforcement learning, offer new possibilities for autonomous control of uncertain or time-varying systems. However, exploring an unknown environment under limited prediction capabilities is a challenge for a learning agent. If the environment is dangerous, free exploration can result in physical damage or in an otherwise unacceptable behavior. With respect to existing methods, the main contribution of this paper is the definition of a new approach that does not require global safety functions, nor specific formulations of the dynamics or of the environment, but relies on interval estimation of the dynamics of the agent during the exploration phase, assuming a limited capability of the agent to perceive the presence of incoming fatal states. Two algorithms are presented with this approach. The first is the Safety Handling Exploration with Risk Perception Algorithm (SHERPA), which provides safety by individuating temporary safety functions, called backups. SHERPA is shown in a simulated, simplified quadrotor task, for which dangerous states are avoided. The second algorithm, denominated OptiSHERPA, can safely handle more dynamically complex systems for which SHERPA is not sufficient through the use of safety metrics. An application of OptiSHERPA is simulated on an aircraft altitude control task.

Foodservice employees benefit from interventions targeting barriers to food safety.

PubMed

York, Valerie K; Brannon, Laura A; Shanklin, Carol W; Roberts, Kevin R; Howells, Amber D; Barrett, Elizabeth B

2009-09-01

The number of foodborne illnesses traced to improper food handling in restaurants indicates a need for research to improve food safety in these establishments. Therefore, this 2-year longitudinal study investigated the effectiveness of traditional ServSafe (National Restaurant Association Educational Foundation, Chicago, IL) food-safety training and a Theory of Planned Behavior intervention program targeting employees' perceived barriers and attitudes toward important food-safety behaviors. The effectiveness of the training and intervention was measured by knowledge scores and observed behavioral compliance rates related to food-safety practices. Employees were observed for handwashing, thermometer usage, and proper handling of work surfaces at baseline, after receiving ServSafe training, and again after exposure to the intervention targeting barriers and negative attitudes about food-safety practices. Repeated-measures analyses of variance indicated training improved handwashing knowledge, but the intervention was necessary to improve overall behavioral compliance and handwashing compliance. Results suggest that registered dietitians; dietetic technicians, registered; and foodservice managers should implement a combination of training and intervention to improve knowledge and compliance with food-safety behaviors, rather than relying on training alone. Challenges encountered while conducting this research are discussed, and recommendations are provided for researchers interested in conducting this type of research in the future.

Results Of Automating A Photolithography Cell In A Clean Tunnel

NASA Astrophysics Data System (ADS)

June, David H.

1987-01-01

A prototype automated photobay was installed in an existing fab area utilizing flexible material handling techniques within a clean tunnel. The project objective was to prove design concepts of automated cassette-to-cassette handling within a clean tunnel that isolated operators from the wafers being processed. Material handling was by monorail track transport system to feed cassettes to pick and place robots. The robots loaded and unloaded cassettes of wafers to each of the various pieces of process equipment. The material handling algorithms, recipe downloading and statistical process control functions were all performed by custom software on the photobay cell controller.

Sodium Heat Pipe Module Processing For the SAFE-100 Reactor Concept

NASA Technical Reports Server (NTRS)

Martin, James; Salvail, Pat

2003-01-01

To support development and hardware-based testing of various space reactor concepts, the Early Flight Fission-Test Facility (EFF-TF) team established a specialized glove box unit with ancillary systems to handle/process alkali metals. Recently, these systems have been commissioned with sodium supporting the fill of stainless steel heat pipe modules for use with a 100 kW thermal heat pipe reactor design. As part of this effort, procedures were developed and refined to govern each segment of the process covering: fill, leak check, vacuum processing, weld closeout, and final "wet in". A series of 316 stainless steel modules, used as precursors to the actual 321 stainless steel modules, were filled with 35 +/- 1 grams of sodium using a known volume canister to control the dispensed mass. Each module was leak checked to less than10(exp -10) std cc/sec helium and vacuum conditioned at 250 C to assist in the removal of trapped gases. A welding procedure was developed to close out the fill stem preventing external gases from entering the evacuated module. Finally the completed modules were vacuum fired at 750 C allowing the sodium to fully wet the internal surface and wick structure of the heat pipe module.

Sodium Heat Pipe Module Processing For the SAFE-100 Reactor Concept

NASA Astrophysics Data System (ADS)

Martin, James; Salvail, Pat

2004-02-01

To support development and hardware-based testing of various space reactor concepts, the Early Flight Fission-Test Facility (EFF-TF) team established a specialized glove box unit with ancillary systems to handle/process alkali metals. Recently, these systems have been commissioned with sodium supporting the fill of stainless steel heat pipe modules for use with a 100 kW thermal heat pipe reactor design. As part of this effort, procedures were developed and refined to govern each segment of the process covering: fill, leak check, vacuum processing, weld closeout, and final ``wet in''. A series of 316 stainless steel modules, used as precursors to the actual 321 stainless steel modules, were filled with 35 +/-1 grams of sodium using a known volume canister to control the dispensed mass. Each module was leak checked to <10-10 std cc/sec helium and vacuum conditioned at 250 °C to assist in the removal of trapped gases. A welding procedure was developed to close out the fill stem preventing external gases from entering the evacuated module. Finally the completed modules were vacuum fired at 750 °C allowing the sodium to fully wet the internal surface and wick structure of the heat pipe module.

[Rural work and health risks: a review into de "safe use" of pesticides in Brazil].

PubMed

de Abreu, Pedro Henrique Barbosa; Alonzo, Herling Gregorio Aguilar

2014-10-01

The paradigm of the "safe use" of pesticides is based on measures to control risks in the handling of these products. However, studies carried out in various regions of Brazil reveal a situation of widespread exposure and health damages among rural workers, revealing the ineffectiveness of this paradigm. This work presents a critical review of the "safe use" approach for pesticides in scientific papers published in Brazil in the past 15 years. Results indicate that these studies do not address, simultaneously, all the work activities that involve exposure and risk of intoxication (acquisition, transportation, storage, preparation and application, final disposal of empty containers and sanitization of contaminated clothes/ PPEs), nor do they comprehensively address the "safe use" measures recommended in safety manuals, which are mandatory for each activity. A total of 25 studies were selected and analyzed, revealing a high number of results and analyses regarding activities of preparation and application and final disposal of empty containers. The range of the approaches was seen to be timely in the six work activities. For future studies, a broader approach of the "safe use" of pesticides is recommended, seeking to reveal the complete infeasibility of this safety paradigm.

Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil.

PubMed

Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa Sobrinho, Paulo de Souza; da Silva, Daniele Ferreira

2015-06-01

Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05). Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets.

[Hazardous material and safety conditions in veterinary practice. 2: Flammable liquid, disinfectants and cleansing media, cytostatics, pressurized gases, liquid nitrogen, narcotic gases, mailing of diagnostic samples, hazardous waste].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-05-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material was given and the potential risks were mentioned. The correct documentation regarding the protection of personal and the purchase, storage, working conditions and removal of hazardous material was explained. General rules for the handling of hazardous material were described. In part 2, partial emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gases, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references are also given.

Initial operation with sodium in the Madison Dynamo Experiment.

NASA Astrophysics Data System (ADS)

Kendrick, R.; Spence, Ej; Forest, C. B.; O'Connell, R.; Nornberg, Md; Canary, Hw; Wright, A.; Robinson, K.

1999-11-01

A new liquid metal MHD experiment has been constructed at the University of Wisconsin to test several key predictions of dynamo theory: magnetic instabilities driven by sheared flow, the effects of turbulence on current generation, and the back-reaction of the self-generated magnetic field on the fluid motion which brings saturation. This presentation describes the engineering design of the experiment, which is a 0.5 m radius spherical vessel, filled with liquid sodium at 150 ^circC. The experiment is designed to achieve a magnetic Reynolds number in excess of 100, which requires approximately 80 Hp of mechanical drive, producing flow velocities in sodium of 15 m/s through impellers. Handling liquid sodium offers a number of technical challenges, but routine techniques have been developed over the past several decades for safely handling large quantities for the fast breeder reactor. The handling strategy is discussed, technical details concerning seals and pressurization are presented, and safety elements are highlighted.

37 CFR 201.15 - Special handling of pending claims requiring expedited processing for purposes of litigation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Special handling of pending..., Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.15 Special handling of pending claims requiring expedited processing for purposes of...

APIC position paper: safe injection, infusion, and medication vial practices in health care.

PubMed

Dolan, Susan A; Felizardo, Gwenda; Barnes, Sue; Cox, Tracy R; Patrick, Marcia; Ward, Katherine S; Arias, Kathleen Meehan

2010-04-01

Outbreaks involving the transmission of bloodborne pathogens or other microbial pathogens to patients in various types of health care settings due to unsafe injection, infusion, and medication vial practices are unacceptable. Each of the outbreaks could have been prevented by the use of proper aseptic technique in conjunction with basic infection prevention practices for handling parenteral medications, administration of injections, and procurement and sampling of blood. This document provides practice guidance for health care facilities on essential safe injection, infusion, and vial practices that should be consistently implemented in such settings. 2010 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

AORN ergonomic tool 2: positioning and repositioning the supine patient on the OR bed.

PubMed

Waters, Thomas; Short, Manon; Lloyd, John; Baptiste, Andrea; Butler, Lorraine; Petersen, Carol; Nelson, Audrey

2011-04-01

Positioning or repositioning a patient on the OR bed in preparation for a surgical procedure presents a high risk for musculoskeletal disorders, such as low-back and shoulder injuries, for perioperative personnel. Safe patient handling requires knowledge of current ergonomic safety concepts, scientific evidence, and equipment and devices to ensure that neither the patient nor the caregiver is at risk for injury. AORN Ergonomic Tool 2: Positioning and Repositioning the Supine Patient on the OR Bed provides guidelines that enable perioperative personnel to determine safe methods for positioning and repositioning a patient in the semi-Fowler, lateral, or lithotomy position in preparation for surgery. Published by Elsevier Inc.

Alignment and testing of critical interface fixtures for the James Webb Space Telescope

NASA Astrophysics Data System (ADS)

McLean, Kyle; Bagdanove, Paul; Berrier, Joshua; Cofie, Emmanuel; Glassman, Tiffany; Hadjimichael, Theodore; Johnson, Eric; Levi, Joshua; Lo, Amy; McMann, Joseph; Ohl, Raymond; Osgood, Dean; Parker, James; Redman, Kevin; Roberts, Vicki; Stephens, Matthew; Sutton, Adam; Wenzel, Greg; Young, Jerrod

2017-08-01

NASA's James Webb Space Telescope (JWST) is a 6.5m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory architecture includes the Primary Mirror Backplane Support Structure (PMBSS) and Integrated Science Instrument Module (ISIM) Electronics Compartment (IEC) which is designed to integrate to the spacecraft bus via six cup/cone interfaces. Prior to integration to the spacecraft bus, the JWST observatory must undergo environmental testing, handling, and transportation. Multiple fixtures were developed to support these tasks including the vibration fixture and handling and integration fixture (HIF). This work reports on the development of the nominal alignment of the six interfaces and metrology operations performed for the JWST observatory to safely integrate them for successful environmental testing.

Food sanitation practices in restaurants of Ramallah and Al-Bireh district of Palestine.

PubMed

Al-Khatib, I A; Al-Mitwalli, S M

2009-01-01

Safe handling of food in restaurants is a basic element in the reduction of foodborne illness. We investigated knowledge and practices about food safety by food-handlers in restaurants in Ramallah and Al-Bireh district of Palestine. A high proportion of workers in the restaurants had no previous experience in other restaurants and 63.4% had received no training on food sanitation and safety. Most of the restaurants in the refugee camps, villages and towns had only 1 worker. Restaurants lacked basic conditions for food sanitation and safety, such as hot water in most and cleaning materials in some. Many workers had poor personal hygiene practices. Training is needed for restaurant owners and staff to improve food handling practices and standards.

Alignment and Testing of Critical Interface Fixtures for the James Webb Space Telescope

NASA Technical Reports Server (NTRS)

Mclean, Kyle; Bagdanove, Paul; Berrier, Joshua; Cofie, Emmanuel; Glassman, Tiffany; Hadjimichael, Theodore; Johnson, Eric; Levi, Joshua; Lo, Amy; McMann, Joseph;

Alignment and Testing of Critical Interface Fixtures for the James Webb Space Telescope

NASA Technical Reports Server (NTRS)

Mclean, Kyle; Bagdanove, Paul; Berrier, Joshua; Cofie, Emmanuel; Glassman, Tiffany; Hadjimichael, Theodore; Johnson, Eric; Levi, Joshua; Lo, Amy; McMann, Joseph;

Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

NASA Technical Reports Server (NTRS)

Gera, Joseph; Bosworth, John T.

1987-01-01

Initial envelope clearance and subsequent flight testing of a new, fully augmented airplane with an extremely high degree of static instability can place unusual demands on the flight test approach. Previous flight test experience with these kinds of airplanes is very limited or nonexistent. The safe and efficient flight testing may be further complicated by a multiplicity of control effectors that may be present on this class of airplanes. This paper describes some novel flight test and analysis techniques in the flight dynamics and handling qualities area. These techniques were utilized during the initial flight envelope clearance of the X-29A aircraft and were largely responsible for the completion of the flight controls clearance program without any incidents or significant delays.

[Preparation and administration of cytotoxic drugs: prickly innovation].

PubMed

Mullot, H; Simon, L; Payen, C; Gentes, P

2005-06-01

The requirement for safe and optimal administration of cytotoxic drugs led us to test a new product manufactured by Codan. The transfer set (CONNECT SET) and the administration set (CYTO-AD-SET) were assessed successively by pharmacist assistance within a centralized unit for cytotoxic drug preparation and by the nursing staff in an ambulatory unit. Transfer sets can be handled in the centralized units without using needles, but with an increased sterilization load and production cost. Assessment of the administration sets demonstrated time saving for the nursing staff. These materials require significant expenditures, careful training, and a change in treatment routine, but provide important time savings for the nursing staff and considerable improvement in the safety of handling cytotoxic drugs.

76 FR 13112 - Maryland Regulatory Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

... generation, storage, handling, processing, disposal, recycling, beneficial use, or other use of CCBs within... establish requirements pertaining to the generation, storage, handling, processing, disposal, recycling...

Guidelines for safe handling, use and disposal of nanoparticles

NASA Astrophysics Data System (ADS)

Amoabediny, G. H.; Naderi, A.; Malakootikhah, J.; Koohi, M. K.; Mortazavi, S. A.; Naderi, M.; Rashedi, H.

2009-05-01

Health, safety and environmental (HSE) risks of a technology is an inseparable part of it which threatens all exposed employees. It has been proved for many years that exposure to particles, in an occupational setting, could be linked with the onset of lung diseases, such as pneumoconiosis, chronic obstructive pulmonary disease (COPD), and mesotelioma and lung cancer. Nanoparticles, due to their unique characteristics including; small size, shape, high surface area, charge, chemical properties, solubility, and degree of agglomeration can cross cell boundaries or pass directly from the lungs into the blood stream and ultimately reach to all of the organs in the body. This is the reason why they may pose higher risk than the same mass and material of larger particles. Moreover, biodegradation of nanoparticles by some kinds of fungi (like wood decay fungi) may result in metabolites which may be toxic to microorganisms under aerobic and anaerobic conditions. Bacteria and living cells can take up nanoparticles, providing the basis for potential bioaccumulation in the food chain. Considering Iran's prominent position in nanotechnologies and fast-growing in research and industrial activities, controlling nanoparticles related HSE risks should be highly considered. In general, there are three main approaches to risk and exposure control: engineering techniques, administrative means and personal protective equipments. These complementary approaches especially engineering techniques should be considered starting with the design stage of an industrial process. Administrative means of control constitute an additional approach when the other methods have not achieved the expected control levels. Administrative means of control must never substitute for engineering techniques, which always be performed according to standard practices. In some situations, due to insufficiently advanced technology and prohibitive costs, engineering measerus can not be implemended. In these situations, performing administrative means of control constitute other ways of limiaiting the occupational exposure risks. Accordingly, to minimize the risks from know and unknown health, safety and invironment hazards in research and occupational setting of the country, guideline for safe handling, use and disposal of manopractical has provided.

Versatile Boron Carbide-Based Visual Obscurant Compositions for Smoke Munitions

DTIC Science & Technology

2015-04-17

Versatile Boron Carbide-Based Visual Obscurant Compositions for Smoke Munitions Anthony P. Shaw,*,† Giancarlo Diviacchi,‡ Ernest L. Black,‡ Jared D...have been demonstrated to produce thick white smoke clouds upon combustion. These compositions use powdered boron carbide (B4C) as a pyrotechnic...ignition and are safe to handle. KEYWORDS: Smoke, Obscurants, Pyrotechnics, Boron carbide, Sustainable chemistry ■ INTRODUCTION Visible obscuration

Editorial. Recent advances and new challenges of occupational and environmental health of nanotechnology

NASA Astrophysics Data System (ADS)

Tsai, Chuen-Jinn; Pui, David Y. H.

2009-01-01

An overview of the special issue of the Journal of Nanoparticle Research on Occupational and Environmental Health of nanotechnology is presented. Papers published in this special issue show considerable progress in understanding nanoparticle toxicity, monitoring, generation, dustiness, filtration, and applications of nanoparticles. More research is needed to ensure safe handling of nanomaterials as nanotechnology continues to develop at an incredible pace.

Safe Operation of Mobile Unmanned Ground Vehicle (UGV) Systems

DTIC Science & Technology

2010-07-13

vehicle could go during uncommanded movement and full throttle acceleration. 4. TEST PROCEDURES. 4.1 Vehicle Subsystem Tests. These tests identify...time required to go from straight ahead to full deflection in one direction. (sec) i. Observations on ability of the remote operator to maintain...were well below the lateral acceleration limits of the vehicle resulting in very predictable handling traits. The primary concern , albeit subjective

Hair cuttime on ISS

NASA Image and Video Library

2015-03-22

Caption: ISS043E044174 (03/22/2015) --- Its haircut time onboard the International Space Station as Expedition 43 Commander and NASA astronaut Terry Virts handles the scissors while ESA (European Space Agency) astronaut Samantha Cristoforetti holds the vacuum to immediately pull the fine hair strands into the safe container so they don't float away into the station. Hair trims are a regular occurrence during an astronaut's six month tour.

Fire Technology Abstracts, volume 4, issue 1, August, 1981

NASA Astrophysics Data System (ADS)

Holtschlag, L. J.; Kuvshinoff, B. W.; Jernigan, J. B.

This bibliography contains over 400 citations with abstracts addressing various aspects of fire technology. Subjects cover the dynamics of fire, behavior and properties of materials, fire modeling and test burns, fire protection, fire safety, fire service organization, apparatus and equipment, fire prevention, suppression, planning, human behavior, medical problems, codes and standards, hazard identification, safe handling of materials, insurance, economics of loss and prevention, and more.

BIPM Time Activities Update

DTIC Science & Technology

2009-11-01

transfer technique as GPS PPP and GLONASS Common View, - creation of new statistical tools in order remove outliers in TWSTFT time links, making the...in-view [1] using single- and dual-frequency receivers and TWSTFT links [2-4]. Significant progress has been made in time transfer for clock...of differentially calibrated GLONASS receivers [8]. TWSTFT links are often affected by outliers which are difficult to remove; for safe handling, a

Radiolytic Effects on Fluoride Impurities in a U{sub 3}O{sub 8} Matrix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Icenhour, A.S.

2000-05-01

The safe handling and storage of radioactive materials require an understanding of the effects of radiolysis on those materials. Radiolysis may result in the production of gases (e.g., corrosives) or pressures that are deleterious to storage containers. A study has been performed to address these concerns as they relate to the radiolysis of residual fluoride compounds in uranium oxides.

Criticality Safety Basics for INL FMHs and CSOs

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. L. Putman

2012-04-01

Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional information from readers and from personnel who took course 00INL189. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that fissionable material handlers and criticality safety officers must understand. The reorganization is based on and consistent with changes made to course 00INL189 due to a review of course exam results and to discussions with personnel who conduct area-specific training.« less

Crewed Space Vehicle Battery Safety Requirements

NASA Technical Reports Server (NTRS)

Jeevarajan, Judith A.; Darcy, Eric C.

2014-01-01

This requirements document is applicable to all batteries on crewed spacecraft, including vehicle, payload, and crew equipment batteries. It defines the specific provisions required to design a battery that is safe for ground personnel and crew members to handle and/or operate during all applicable phases of crewed missions, safe for use in the enclosed environment of a crewed space vehicle, and safe for use in launch vehicles, as well as in unpressurized spaces adjacent to the habitable portion of a space vehicle. The required provisions encompass hazard controls, design evaluation, and verification. The extent of the hazard controls and verification required depends on the applicability and credibility of the hazard to the specific battery design and applicable missions under review. Evaluation of the design and verification program results shall be completed prior to certification for flight and ground operations. This requirements document is geared toward the designers of battery systems to be used in crewed vehicles, crew equipment, crew suits, or batteries to be used in crewed vehicle systems and payloads (or experiments). This requirements document also applies to ground handling and testing of flight batteries. Specific design and verification requirements for a battery are dependent upon the battery chemistry, capacity, complexity, charging, environment, and application. The variety of battery chemistries available, combined with the variety of battery-powered applications, results in each battery application having specific, unique requirements pertinent to the specific battery application. However, there are basic requirements for all battery designs and applications, which are listed in section 4. Section 5 includes a description of hazards and controls and also includes requirements.

Biosynthesis, targeting, and processing of lysosomal proteins: pulse-chase labeling and immune precipitation.

PubMed

Pohl, Sandra; Hasilik, Andrej

2015-01-01

Incorporation of radioactive precursors of amino acids and/or modifier groups into proteins, isolation and sizing of polypeptide species of interest, and finally their detection and characterization provide a robust handle to examine the life cycle and varied modifications of any protein. A prerequisite in application of these techniques to lysosomal enzymes is the availability of an avid and specific antibody, because lysosomal proteins represent a very minor fraction of the cellular protein and must be purified without a significant loss many 1000-fold as conveniently as possible. Pulse-chase labeling and good knowledge on organelle-specific modifications of lysosomal proteins may enhance the information that can be obtained from such experiments. We describe procedures for pulse-chase labeling experiments that have proven to work with a commercially available antibody against a mouse and a human lysosomal protease and can be used as a reference in establishing the technique in any laboratory that has an access to a certified isotope facility and the knowledge to handle radioactivity safely. We discuss the crucial steps and refer to alternatives described in the literature. The present model protein cathepsin Z is synthesized as a larger proenzyme that contains two N-linked oligosaccharides and matures to a shorter single chain enzyme retaining the processed oligosaccharides. A pulse-chase experiment demonstrates the conversion of the precursor into the mature form. In addition, results on deglycosylation of metabolically labeled cathepsin Z are shown and the alterations in the apparent size of the glycopeptides are explained. Copyright © 2015 Elsevier Inc. All rights reserved.

Establishment of Biosafety Level-3 (BSL-3) laboratory: Important criteria to consider while designing, constructing, commissioning & operating the facility in Indian setting

PubMed Central

Mourya, Devendra T.; Yadav, Pragya D.; Majumdar, Triparna Dutta; Chauhan, Devendra S.; Katoch, Vishwa Mohan

2014-01-01

Since the enactment of Environmental Protection Act in 1989 and Department of Biotechnology (DBT) guidelines to deal with genetically modified organisms, India has embarked on establishing various levels of biosafety laboratories to deal with highly infectious and pathogenic organisms. Occurrence of outbreaks due to rapidly spreading respiratory and haemorrhagic fever causing viruses has caused an urgency to create a safe laboratory environment. This has thus become a mandate, not only to protect laboratory workers, but also to protect the environment and community. In India, technology and science are progressing rapidly. Several BSL-3 [=high containment] laboratories are in the planning or execution phase, to tackle biosafety issues involved in handling highly infectious disease agents required for basic research and diagnosis. In most of the developing countries, the awareness about biocontainment has increased but planning, designing, constructing and operating BSL-3 laboratories need regular updates about the design and construction of facilities and clear definition of risk groups and their handling which should be in harmony with the latest international practices. This article describes the major steps involved in the process of construction of a BSL-3 laboratory in Indian settings, from freezing the concept of proposal to operationalization phase. The key to success of this kind of project is strong institutional commitment to biosafety norms, adequate fund availability, careful planning and designing, hiring good construction agency, monitoring by experienced consultancy agency and involvement of scientific and engineering personnel with biocontainment experience in the process. PMID:25297350

Establishment of Biosafety Level-3 (BSL-3) laboratory: important criteria to consider while designing, constructing, commissioning & operating the facility in Indian setting.

PubMed

Mourya, Devendra T; Yadav, Pragya D; Majumdar, Triparna Dutta; Chauhan, Devendra S; Katoch, Vishwa Mohan

2014-08-01

Since the enactment of Environmental Protection Act in 1989 and Department of Biotechnology (DBT) guidelines to deal with genetically modified organisms, India has embarked on establishing various levels of biosafety laboratories to deal with highly infectious and pathogenic organisms. Occurrence of outbreaks due to rapidly spreading respiratory and haemorrhagic fever causing viruses has caused an urgency to create a safe laboratory environment. This has thus become a mandate, not only to protect laboratory workers, but also to protect the environment and community. In India, technology and science are progressing rapidly. Several BSL-3 [=high containment] laboratories are in the planning or execution phase, to tackle biosafety issues involved in handling highly infectious disease agents required for basic research and diagnosis. In most of the developing countries, the awareness about biocontainment has increased but planning, designing, constructing and operating BSL-3 laboratories need regular updates about the design and construction of facilities and clear definition of risk groups and their handling which should be in harmony with the latest international practices. This article describes the major steps involved in the process of construction of a BSL-3 laboratory in Indian settings, from freezing the concept of proposal to operationalization phase. The key to success of this kind of project is strong institutional commitment to biosafety norms, adequate fund availability, careful planning and designing, hiring good construction agency, monitoring by experienced consultancy agency and involvement of scientific and engineering personnel with biocontainment experience in the process.

Topological Analysis and Gaussian Decision Tree: Effective Representation and Classification of Biosignals of Small Sample Size.

PubMed

Zhang, Zhifei; Song, Yang; Cui, Haochen; Wu, Jayne; Schwartz, Fernando; Qi, Hairong

2017-09-01

Bucking the trend of big data, in microdevice engineering, small sample size is common, especially when the device is still at the proof-of-concept stage. The small sample size, small interclass variation, and large intraclass variation, have brought biosignal analysis new challenges. Novel representation and classification approaches need to be developed to effectively recognize targets of interests with the absence of a large training set. Moving away from the traditional signal analysis in the spatiotemporal domain, we exploit the biosignal representation in the topological domain that would reveal the intrinsic structure of point clouds generated from the biosignal. Additionally, we propose a Gaussian-based decision tree (GDT), which can efficiently classify the biosignals even when the sample size is extremely small. This study is motivated by the application of mastitis detection using low-voltage alternating current electrokinetics (ACEK) where five categories of bisignals need to be recognized with only two samples in each class. Experimental results demonstrate the robustness of the topological features as well as the advantage of GDT over some conventional classifiers in handling small dataset. Our method reduces the voltage of ACEK to a safe level and still yields high-fidelity results with a short assay time. This paper makes two distinctive contributions to the field of biosignal analysis, including performing signal processing in the topological domain and handling extremely small dataset. Currently, there have been no related works that can efficiently tackle the dilemma between avoiding electrochemical reaction and accelerating assay process using ACEK.

76 FR 5103 - Maryland Regulatory Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

..., storage, handling, processing, disposal, recycling, beneficial use, or other use of CCBs within the State... pertaining to the generation, storage, handling, processing, disposal, recycling, beneficial use, or other...

The farm apprentice: agricultural college students recollections of learning to farm "safely".

PubMed

Sanderson, L L; Dukeshire, S R; Rangel, C; Garbes, R

2010-10-01

A consistent message in the farm safety literature is the need to develop effective interventions to manage the unacceptably high rate of injury and death among farm children. To better understand the influence of childhood farm experiences on safety beliefs, attitudes, and practices, semi-structured interviews were conducted with 24 farm youth attending the Nova Scotia Agricultural College. The interviews were designed to elicit information pertaining to participants' earliest memories of involvement in farm activities, the decision-making processes that led them to assume work-related responsibilities, and the roles that their parents played in their safety training. A common theme of experiencing childhood as a "farm apprentice" emerged across all narratives whereby farm activities were learned primarily through observational learning and modeling of parents and then mastered through repetition. As "farm apprentices," the youths' involvement in dangerous activities such as tractor driving and livestock handling began at early ages, with very little formal training and supervision. Although participants clearly described themselves as being exposed to dangerous activities, they believed that they had the capacity to control the risks and farm safely. Based on our findings, the concept of the "farm apprentice" appears to be integral to the social context of the farming community and should be considered in the design of interventions to reduce child injury and death.

Knowledge, Attitudes and Practices of Law Enforcement Officers on Rabies and Animal Control Issues in Kansas.

PubMed

Straily, A; Trevino-Garrison, I

2017-03-01

Rabies is a deadly zoonoses endemic in the United States, including Kansas. Animal control programmes that emphasize vaccination of dogs and cats, removal of stray animals and enforcement of licensure programmes have historically been essential in reducing the risk of rabies exposures to humans (Beran, 1991). Kansas does not mandate the use of animal control officers [ACOs] and in areas where there is no designated animal control officer, law enforcement officers [LEOs] are required to fill that role. Little is known about LEOs' knowledge of rabies, their current practices in responding to animal-related calls or if they receive any specialized training to perform the duties of an ACO. A web-based, voluntary and anonymous survey was sent to law enforcement officers in Kansas in January 2014. The survey included questions about animal control practices and a self-assessment of rabies knowledge. The response rate was 16.2%. All respondents indicated LEOs will respond to animal-related calls, even if there was an ACO available in their department or jurisdiction. A majority of respondents indicated they had not received training on safe animal handling (62.9%, 61/97) or zoonoses prevention (85.6%, 83/97), even though a strong majority considered such training important (89.7% and 79.4%, respectively). Most respondents (>80%) were able to correctly identify animals capable of transmitting rabies but were less aware of how rabies was transmitted or the severity of rabies in humans. Our results demonstrate that Kansas LEOs perform animal control duties, many without the proper training, even though most consider such training to be important to be able to perform their duties safely. Training on safe animal handling and zoonoses prevention should be provided to all LEOs in Kansas to enable them to safely execute their duties and provide timely and accurate information to citizens regarding rabies prevention. © 2016 Blackwell Verlag GmbH.

9 CFR 318.308 - Deviations in processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Deviations in processing (or process deviations) must be handled according to: (1)(i) A HACCP plan for canned...) of this section. (c) [Reserved] (d) Procedures for handling process deviations where the HACCP plan... accordance with the following procedures: (a) Emergency stops. (1) When retort jams or breakdowns occur...

Thermal decomposition hazard evaluation of hydroxylamine nitrate.

PubMed

Wei, Chunyang; Rogers, William J; Mannan, M Sam

2006-03-17

Hydroxylamine nitrate (HAN) is an important member of the hydroxylamine family and it is a liquid propellant when combined with alkylammonium nitrate fuel in an aqueous solution. Low concentrations of HAN are used primarily in the nuclear industry as a reductant in nuclear material processing and for decontamination of equipment. Also, HAN has been involved in several incidents because of its instability and autocatalytic decomposition behavior. This paper presents calorimetric measurement for the thermal decomposition of 24 mass% HAN/water. Gas phase enthalpy of formation of HAN is calculated using both semi-empirical methods with MOPAC and high-level quantum chemical methods of Gaussian 03. CHETAH is used to estimate the energy release potential of HAN. A Reactive System Screening Tool (RSST) and an Automatic Pressure Tracking Adiabatic Calorimeter (APTAC) are used to characterize thermal decomposition of HAN and to provide guidance about safe conditions for handling and storing of HAN.

Intentional cargo disruption by nefarious means: Examining threats, systemic vulnerabilities and securitisation measures in complex global supply chains.

PubMed

McGreevy, Conor; Harrop, Wayne

2015-01-01

Global trade and commerce requires products to be securely contained and transferred in a timely way across great distances and between national boundaries. Throughout the process, cargo and containers are stored, handled and checked by a range of authorities and authorised agents. Intermodal transportation involves the use of container ships, planes, railway systems, land bridges, road networks and barges. This paper examines the the nefarious nature of intentional disruption and nefarious risks associated with the movement of cargo and container freight. The paper explores main threats, vulnerabilities and security measures relevant to significant intermodal transit risk issues such as theft, piracy, terrorism, contamination, counterfeiting and product tampering. Three risk and vulnerability models are examined and basic standards and regulations that are relevant to safe and secure transit of container goods across international supply networks are outlined.

Biosafety standards for working with Crimean-Congo hemorrhagic fever virus.

PubMed

Weidmann, Manfred; Avsic-Zupanc, Tatjana; Bino, Silvia; Bouloy, Michelle; Burt, Felicity; Chinikar, Sadegh; Christova, Iva; Dedushaj, Isuf; El-Sanousi, Ahmed; Elaldi, Nazif; Hewson, Roger; Hufert, Frank T; Humolli, Isme; Jansen van Vuren, Petrus; Koçak Tufan, Zeliha; Korukluoglu, Gülay; Lyssen, Pieter; Mirazimi, Ali; Neyts, Johan; Niedrig, Matthias; Ozkul, Aykut; Papa, Anna; Paweska, Janusz; Sall, Amadou A; Schmaljohn, Connie S; Swanepoel, Robert; Uyar, Yavuz; Weber, Friedemann; Zeller, Herve

2016-11-01

In countries from which Crimean-Congo haemorrhagic fever (CCHF) is absent, the causative virus, CCHF virus (CCHFV), is classified as a hazard group 4 agent and handled in containment level (CL)-4. In contrast, most endemic countries out of necessity have had to perform diagnostic tests under biosafety level (BSL)-2 or -3 conditions. In particular, Turkey and several of the Balkan countries have safely processed more than 100 000 samples over many years in BSL-2 laboratories. It is therefore advocated that biosafety requirements for CCHF diagnostic procedures should be revised, to allow the tests required to be performed under enhanced BSL-2 conditions with appropriate biosafety laboratory equipment and personal protective equipment used according to standardized protocols in the countries affected. Downgrading of CCHFV research work from CL-4, BSL-4 to CL-3, BSL-3 should also be considered.

Systems and methods for harvesting and storing materials produced in a nuclear reactor

DOEpatents

Heinold, Mark R.; Dayal, Yogeshwar; Brittingham, Martin W.

2016-04-05

Systems produce desired isotopes through irradiation in nuclear reactor instrumentation tubes and deposit the same in a robust facility for immediate shipping, handling, and/or consumption. Irradiation targets are inserted and removed through inaccessible areas without plant shutdown and placed in the harvesting facility, such as a plurality of sealable and shipping-safe casks and/or canisters. Systems may connect various structures in a sealed manner to avoid release of dangerous or unwanted matter throughout the nuclear plant, and/or systems may also automatically decontaminate materials to be released. Useable casks or canisters can include plural barriers for containment that are temporarily and selectively removable with specially-configured paths inserted therein. Penetrations in the facilities may limit waste or pneumatic gas escape and allow the same to be removed from the systems without over-pressurization or leakage. Methods include processing irradiation targets through such systems and securely delivering them in such harvesting facilities.

Consumer food handling in the home: a review of food safety studies.

PubMed

Redmond, Elizabeth C; Griffith, Christopher J

2003-01-01

Epidemiological data from Europe, North America, Australia, and New Zealand indicate that a substantial proportion of foodborne disease is attributable to improper food preparation practices in consumers' homes. International concern about consumer food safety has prompted considerable research to evaluate domestic food-handling practices. The majority of consumer food safety studies in the last decade have been conducted in the United Kingdom and Northern Ireland (48%) and in the United States (42%). Surveys (questionnaires and interviews), the most frequent means of data collection, were used in 75% of the reviewed studies. Focus groups and observational studies have also been used. One consumer food safety study examined the relationship between pathogenic microbial contamination from raw chicken and observed food-handling behaviors, and the results of this study indicated extensive Campylobacter cross-contamination during food preparation sessions. Limited information about consumers' attitudes and intentions with regard to safe food-handling behaviors has been obtained, although a substantial amount of information about consumer knowledge and self-reported practices is available. Observation studies suggest that substantial numbers of consumers frequently implement unsafe food-handling practices. Knowledge, attitudes, intentions, and self-reported practices did not correspond to observed behaviors, suggesting that observational studies provide a more realistic indication of the food hygiene actions actually used in domestic food preparation. An improvement in consumer food-handling behavior is likely to reduce the risk and incidence of foodborne disease. The need for the development and implementation of food safety education strategies to improve specific food safety behaviors is reviewed in this paper.

Important exposure controls for protection against antineoplastic agents: Highlights for oncology health care workers.

PubMed

Alehashem, Maryam; Baniasadi, Shadi

2018-01-01

A great number of antineoplastic drugs (ANPDs) are used globally in cancer treatment. Due to their adverse health effects, occupational exposure to ANPDs is considered a potential health risk to health care workers. The current study aimed to evaluate safe-handling practices of ANPDs, exposure controls, and adverse health implications for health care providers exposed to ANDPs. Prevention measures, including engineering, administrative, and work practice controls, as well as personal protective equipment (PPE), were recorded daily through a questionnaire for six weeks. Acute adverse health effects experienced by health care workers were also documented. The implemented exposure controls for preparation, administration, cleaning, and waste disposal were not in accordance with the safe handling guidelines. Central nervous system disorders (26.33%) were the most frequent acute adverse effects reported by health care workers. A significant correlation was found between the number of experienced adverse effects and handling characteristics, including the number of preparations (r = 0.38, p < 0.05), dose, and the number of prepared drugs (r = 0.46, p < 0.01 and 0.39, p < 0.05), and working hours in different locations of oncology setting for six weeks (preparation room: r = 0.38, P < 0.05, treatment room: r = 0.46, P < 0.01, patient room: r = 0.63, P < 0.01, and station: r = 0.68, P < 0.01). Due to inadequate control measures, oncology health care workers were in danger of exposure to ANPDs and experienced acute adverse health effects. Implementation of appropriate exposure controls is required to prevent occupational exposure to ANPDs.

Knowledge of nursing students about central venous catheters.

PubMed

Mlinar, Suzana; Malnarsić, Rosanda Rasković

2012-04-01

Central venous catheters (CVC) are at the crucial importance, particulary in the intensive therapy units. In order to handle a CVC safely, nursing students need to acquire theoretical and practical knowledge during the course of their studies. The aim of the study was to establish theoretical knowledge of nursing students about the procedures of nurses in placing and removing a central venous catheter (CVC), dressing the catheter entry point, the reasons for measuring central venous pressure (CVP), possible complications and risk factors for developing infections related to CVC. The questionnaire developed specifically for this cross-sectionl study was handed out to 87 full-time students and 57 part-time students. The results show that all the surveyed nursing students know why chest radiography is carried out when inserting a catheter, have relatively good knowledge of CVC insertion points, procedures carried out in case of a suspected catheter sepsis and complications and risk factors for the development of infections related to CVC. However, the study show that the majority of students have insufficient knowledge of the procedures accompanying insertion of a catheter, signs that indicate correct functioning of CVC, frequency of flushing a catheter when it is not in use and the reasons for introducing an implanted CVC. Based on the results of the study it can be concluded that the second-year nursing students have insufficient knowledge of CVC. In order to correctly and safely handle a CVC, good theoretical knowledge and relevant practical experience are needed. The authors therefore believe that, in future, the classes should be organized in smaller groups with step-by-step demonstrations of individual procedures in handling a CVC, and the students encouraged to learn as actively as possible.

Environmental health program activities

NASA Technical Reports Server (NTRS)

Bergtholdt, C. P.

1969-01-01

Activities reported include studies on toxic air contaminants, excessive noise, poor lighting, food sanitation, water pollution, and exposure to nonionizing radiation as health hazards. Formulations for a radiological health manual provide guidance to personnel in the procurement and safe handling of radiation producing equipment and Apollo mission planning. A literature search and development of a water analysis laboratory are outlined to obtain information regarding microbiological problems involving potable water, waste management, and personal hygiene.

Fire technology abstracts, volume 4. Cumulative indexes

NASA Astrophysics Data System (ADS)

1982-03-01

Cumulative subject, author, publisher, and report number indexes referencing articles, books, reports, and patents are provided. The dynamics of fire, behavior and properties of materials, fire modeling and test burns, fire protection, fire safety, fire service organization, apparatus and equipment, fire prevention suppression, planning, human behavior, medical problems, codes and standards, hazard identification, safe handling of materials, and insurance economics of loss and prevention are among the subjects covered.

Context-dependent ‘safekeeping’ of foraging tools in New Caledonian crows

PubMed Central

Klump, Barbara C.; van der Wal, Jessica E. M.; St Clair, James J. H.; Rutz, Christian

2015-01-01

Several animal species use tools for foraging, such as sticks to extract embedded arthropods and honey, or stones to crack open nuts and eggs. While providing access to nutritious foods, these behaviours may incur significant costs, such as the time and energy spent searching for, manufacturing and transporting tools. These costs can be reduced by re-using tools, keeping them safe when not needed. We experimentally investigated what New Caledonian crows do with their tools between successive prey extractions, and whether they express tool ‘safekeeping’ behaviours more often when the costs (foraging at height), or likelihood (handling of demanding prey), of tool loss are high. Birds generally took care of their tools (84% of 176 prey extractions, nine subjects), either trapping them underfoot (74%) or storing them in holes (26%)—behaviours we also observed in the wild (19 cases, four subjects). Moreover, tool-handling behaviour was context-dependent, with subjects: keeping their tools safe significantly more often when foraging at height; and storing tools significantly more often in holes when extracting more demanding prey (under these conditions, foot-trapping proved challenging). In arboreal environments, safekeeping can prevent costly tool losses, removing a potentially important constraint on the evolution of habitual and complex tool behaviour. PMID:25994674

APSIC Guidelines for environmental cleaning and decontamination.

PubMed

Ling, Moi Lin; Apisarnthanarak, Anucha; Thu, Le Thi Anh; Villanueva, Victoria; Pandjaitan, Costy; Yusof, Mohamad Yasim

2015-01-01

This document is an executive summary of APSIC Guidelines for Environmental Cleaning and Decontamination. It describes best practices in routine cleaning and decontamination in healthcare facilities as well as in specific settings e.g. management of patients with isolation precautions, food preparation areas, construction and renovation, and following a flood. It recommends the implementation of environmental hygiene program to keep the environment safe for patients, staff and visitors visiting a healthcare facility. Objective assessment of cleanliness and quality is an essential component of this program as a method for identifying quality improvement opportunities. Recommendations for safe handling of linen and bedding; as well as occupational health and safety issues are included in the guidelines. A training program is vital to ensure consistent adherence to best practices.

The safe and responsible disposal of unused controlled drugs.

PubMed

Ahmed, Iftikhar; Majeed, Amer

There are well-defined legal requirements for the safe storage, handling and disposal of controlled drugs (CDs): The Misuse of Drugs Act 1971, and Safer Management of Controlled Drugs (Department of Health, 2007). Clinical staff involved in the prescription and administration of CDs to patients are responsible and accountable for the appropriate disposal of these drugs because of the risk of substance abuse. A review of current practice, as followed by staff involved in the use and disposal of CDs, has been evaluated in a multi-centre audit. This audit showed that a wide variation in attitude towards disposal of CDs exists among medical and non-medical staff, and that the sample hospitals are falling short of meeting proposed standards.

Technology Development for Hydrogen Propellant Storage and Transfer at the Kennedy Space Center (KSC)

NASA Technical Reports Server (NTRS)

Youngquist, Robert; Starr, Stanley; Krenn, Angela; Captain, Janine; Williams, Martha

2016-01-01

The National Aeronautics and Space Administration (NASA) is a major user of liquid hydrogen. In particular, NASA's John F. Kennedy (KSC) Space Center has operated facilities for handling and storing very large quantities of liquid hydrogen (LH2) since the early 1960s. Safe operations pose unique challenges and as a result NASA has invested in technology development to improve operational efficiency and safety. This paper reviews recent innovations including methods of leak and fire detection and aspects of large storage tank health and integrity. We also discuss the use of liquid hydrogen in space and issues we are addressing to ensure safe and efficient operations should hydrogen be used as a propellant derived from in-situ volatiles.

Activation Levels, Handling, and Storage of Activated Components in the Target Hall at FRIB

NASA Astrophysics Data System (ADS)

Georgobiani, D.; Bennett, R.; Bollen, G.; Kostin, M.; Ronningen, R.

2018-06-01

The Facility for Rare Isotope Beams (FRIB) is a major new scientific user facility under construction in the United States for nuclear science research with beams of rare isotopes. 400 kW beam operations with heavy ions ranging from oxygen to uranium will create a high radiation environment for many components, particularly for the beam line components located in the target hall, where approximately 100 kW of beam power are dissipated in the target and another 300 kW are dissipated in the beam dump. Detailed studies of the component activation, their remote handling, storage, and transport, have been performed to ensure safe operation levels in this environment. Levels of activation are calculated for the beam line components within the FRIB target hall.

Tests of protective clothing for the safe handling of pressurized lamps

NASA Technical Reports Server (NTRS)

Ewashinka, J. G.

1975-01-01

Tests were made to find a clothing material combination for use in handling high-pressure lamps. Monofilament nylon, ballistic nylon, and ballistic felt grouped into various multilayer combinations and chromed leather were positioned around and 30 cm (12 in.) away from exploding high-pressure lamps of different manufacturers and wattages. The results are: (1) 5024 nylon/ballistic felt/5024 nylon in a layered configuration was not penetrated by fragments of lamps as large as 6.5 kW; (2) this layered combination is lightweight and pliable and offers greater mobility and comfort to the user than previous protective clothing; and (3) Lexan plastic 1.6 mm (1/6 in.) thick to be used for face shield material showed no penetration for lamps as large as 20 kW.

Conceptual design and optimization for JET water detritiation system cryo-distillation facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lefebvre, X.; Hollingsworth, A.; Parracho, A.

2015-03-15

The aim of the Exhaust Detritiation System (EDS) of the JET Active Gas Handling System (AGHS) is to convert all Q-based species (Q{sub 2}, Q-hydrocarbons) into Q{sub 2}O (Q being indifferently H, D or T) which is then trapped on molecular sieve beds (MSB). Regenerating the saturated MSBs leads to the production of tritiated water which is stored in Briggs drums. An alternative disposal solution to offsite shipping, is to process the tritiated water onsite via the implementation of a Water Detritiation System (WDS) based, in part, on the combination of an electrolyser and a cryo-distillation (CD) facility. The CDmore » system will separate a Q{sub 2} mixture into a de-tritiated hydrogen stream for safe release and a tritiated stream for further processing on existing AGHS subsystems. A sensitivity study of the Souers' model using the simulation program ProSimPlus (edited by ProSim S.A.) has then been undertaken in order to perform an optimised dimensioning of the cryo-distillation system in terms of available cooling technologies, cost of investment, cost of operations, process performance and safety. (authors)« less

Requirements to the procedure and stages of innovative fuel development

NASA Astrophysics Data System (ADS)

Troyanov, V.; Zabudko, L.; Grachyov, A.; Zhdanova, O.

2016-04-01

According to the accepted current understanding under the nuclear fuel we will consider the assembled active zone unit (Fuel assembly) with its structural elements, fuel rods, pellet column, structural materials of fuel rods and fuel assemblies. The licensing process includes justification of safe application of the proposed modifications, including design-basis and experimental justification of the modified items under normal operating conditions and in violation of normal conditions, including accidents as well. Besides the justification of modified units itself, it is required to show the influence of modifications on the performance and safety of the other Reactor Unit’ and Nuclear Plant’ elements (e.g. burst can detection system, transportation and processing operations during fuel handling), as well as to justify the new standards of fuel storage etc. Finally, the modified fuel should comply with the applicable regulations, which often becomes a very difficult task, if only because those regulations, such as the NP-082-07, are not covered modification issues. Making amendments into regulations can be considered as the only solution, but the process is complicated and requires deep grounds for amendments. Some aspects of licensing new nuclear fuel are considered the example of mixed nitride uranium -plutonium fuel application for the BREST reactor unit.

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

Managing patient complaints in China: a qualitative study in Shanghai

PubMed Central

Jiang, Yishi; Ying, Xiaohua; Zhang, Qian; Tang, Sirui Rae; Kane, Sumit; Mukhopadhyay, Maitrayee; Qian, Xu

2014-01-01

Objectives To examine the handling system for patient complaints and to identify existing barriers that are associated with effective management of patient complaints in China. Setting Key stakeholders of the handling system for patient complaints at the national, Shanghai municipal and hospital levels in China. Participants 35 key informants including policymakers, hospital managers, healthcare providers, users and other stakeholders in Shanghai. Primary and secondary outcome measures Semistructured interviews were conducted to understand the process of handling patient complaints and factors affecting the process and outcomes of patient complaint management. Results The Chinese handling system for patient complaints was established in the past decade. Hospitals shoulder the most responsibility of patient complaint handling. Barriers to effective management of patient complaints included service users’ low awareness of the systems in the initial stage of the process; poor capacity and skills of healthcare providers, incompetence and powerlessness of complaint handlers and non-transparent exchange of information during the process of complaint handling; conflicts between relevant actors and regulations and unjustifiable complaints by patients during solution settlements; and weak enforcement of regulations, deficient information for managing patient complaints and unwillingness of the hospitals to effectively handle complaints in the postcomplaint stage. Conclusions Barriers to the effective management of patient complaints vary at the different stages of complaint handling and perspectives on these barriers differ between the service users and providers. Information, procedure design, human resources, system arrangement, unified legal system and regulations and factors shaping the social context all play important roles in effective patient complaint management. PMID:25146715

21 CFR 579.12 - Incorporation of regulations in part 179.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IRRADIATION IN THE PRODUCTION, PROCESSING, AND HANDLING.... Regulations providing for irradiation in the production, processing, and handling of food in part 179 of this...

21 CFR 579.12 - Incorporation of regulations in part 179.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IRRADIATION IN THE PRODUCTION, PROCESSING, AND HANDLING.... Regulations providing for irradiation in the production, processing, and handling of food in part 179 of this...

21 CFR 579.12 - Incorporation of regulations in part 179.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IRRADIATION IN THE PRODUCTION, PROCESSING, AND HANDLING.... Regulations providing for irradiation in the production, processing, and handling of food in part 179 of this...

21 CFR 579.12 - Incorporation of regulations in part 179.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IRRADIATION IN THE PRODUCTION, PROCESSING, AND HANDLING.... Regulations providing for irradiation in the production, processing, and handling of food in part 179 of this...

21 CFR 579.12 - Incorporation of regulations in part 179.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IRRADIATION IN THE PRODUCTION, PROCESSING, AND HANDLING.... Regulations providing for irradiation in the production, processing, and handling of food in part 179 of this...

Integration of Value Stream Map and Healthcare Failure Mode and Effect Analysis into Six Sigma Methodology to Improve Process of Surgical Specimen Handling.

PubMed

Hung, Sheng-Hui; Wang, Pa-Chun; Lin, Hung-Chun; Chen, Hung-Ying; Su, Chao-Ton

2015-01-01

Specimen handling is a critical patient safety issue. Problematic handling process, such as misidentification (of patients, surgical site, and specimen counts), specimen loss, or improper specimen preparation can lead to serious patient harms and lawsuits. Value stream map (VSM) is a tool used to find out non-value-added works, enhance the quality, and reduce the cost of the studied process. On the other hand, healthcare failure mode and effect analysis (HFMEA) is now frequently employed to avoid possible medication errors in healthcare process. Both of them have a goal similar to Six Sigma methodology for process improvement. This study proposes a model that integrates VSM and HFMEA into the framework, which mainly consists of define, measure, analyze, improve, and control (DMAIC), of Six Sigma. A Six Sigma project for improving the process of surgical specimen handling in a hospital was conducted to demonstrate the effectiveness of the proposed model.

Automated blood-sample handling in the clinical laboratory.

PubMed

Godolphin, W; Bodtker, K; Uyeno, D; Goh, L O

1990-09-01

The only significant advances in blood-taking in 25 years have been the disposable needle and evacuated blood-drawing tube. With the exception of a few isolated barcode experiments, most sample-tracking is performed through handwritten or computer-printed labels. Attempts to reduce the hazards of centrifugation have resulted in air-tight lids or chambers, the use of which is time-consuming and cumbersome. Most commonly used clinical analyzers require serum or plasma, distributed into specialized containers, unique to that analyzer. Aliquots for different tests are prepared by handpouring or pipetting. Moderate to large clinical laboratories perform so many different tests that even multi-analyzers performing multiple analyses on a single sample may account for only a portion of all tests ordered for a patient. Thus several aliquots of each specimen are usually required. We have developed a proprietary serial centrifuge and blood-collection tube suitable for incorporation into an automated or robotic sample-handling system. The system we propose is (a) safe--avoids or prevents biological danger to the many "handlers" of blood; (b) small--minimizes the amount of sample taken and space required to adapt to the needs of satellite and mobile testing, and direct interfacing with analyzers; (c) serial--permits each sample to be treated according to its own "merits," optimizes throughput, and facilitates flexible automation; and (d) smart--ensures quality results through monitoring and intelligent control of patient identification, sample characteristics, and separation process.

Mission Data System Java Edition Version 7

NASA Technical Reports Server (NTRS)

Reinholtz, William K.; Wagner, David A.

2013-01-01

The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil

PubMed Central

Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa, Paulo de Souza; da Silva, Daniele Ferreira

2015-01-01

Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05). Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets. PMID:26273278

Estimating time available for sensor fusion exception handling

NASA Astrophysics Data System (ADS)

Murphy, Robin R.; Rogers, Erika

1995-09-01

In previous work, we have developed a generate, test, and debug methodology for detecting, classifying, and responding to sensing failures in autonomous and semi-autonomous mobile robots. An important issue has arisen from these efforts: how much time is there available to classify the cause of the failure and determine an alternative sensing strategy before the robot mission must be terminated? In this paper, we consider the impact of time for teleoperation applications where a remote robot attempts to autonomously maintain sensing in the presence of failures yet has the option to contact the local for further assistance. Time limits are determined by using evidential reasoning with a novel generalization of Dempster-Shafer theory. Generalized Dempster-Shafer theory is used to estimate the time remaining until the robot behavior must be suspended because of uncertainty; this becomes the time limit on autonomous exception handling at the remote. If the remote cannot complete exception handling in this time or needs assistance, responsibility is passed to the local, while the remote assumes a `safe' state. An intelligent assistant then facilitates human intervention, either directing the remote without human assistance or coordinating data collection and presentation to the operator within time limits imposed by the mission. The impact of time on exception handling activities is demonstrated using video camera sensor data.

Analysis of Porosity Defects in Aluminum as Part Handle Motor Vehicle Lever Processed by High-pressure Die Casting

NASA Astrophysics Data System (ADS)

Anggraini, L.; Sugeng

2018-05-01

This research discusses the testing and analysis of cracking Aluminum (Al) material. Al as a handle lever was used for a braking device on a motor vehicle. Cracking of handle lever due to the part content of porosity from hydrogen gas. The existence of the H2 can be caused by the casting process and dies design that is less perfect, especially at the gate or brisket and overflow. This research is to optimize the process of making Al part handle lever, and the construction dies by following the standard. The results of these improvements were reevaluated through the chemical and mechanical testing properties stages, such as density test and tensile test on the workpiece as part handle lever. The loads on the tensile test are 25 kg and 35 kg, and the tensile test result has met the standard set by the motor vehicle company. The optimization result has the porosity defect can be reduced by 99 %. Therefore the best part handle lever can be produced.

40 CFR 63.9621 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing Initial Compliance... section. (b) For each ore crushing and handling affected source and each finished pellet handling affected... each ore crushing and handling affected source and each finished pellet handling affected source, you...

Extension of ERIM multispectral data processing capabilities through improved data handling techniques

NASA Technical Reports Server (NTRS)

Kriegler, F. J.

1973-01-01

The improvement and extension of the capabilities of the Environmental Research Institute of Michigan processing facility in handling multispectral data are discussed. Improvements consisted of implementing hardware modifications which permitted more rapid access to the recorded data through improved numbering and indexing of such data. In addition, techniques are discussed for handling data from sources other than the ERIM M-5 and M-7 scanner systems.

Methods of manipulating stressed epistructures

DOEpatents

Wanlass, Mark W

2014-04-08

A method of processing an epistructure or processing a semiconductor device including associating a conformal and flexible handle with the epistructure and removing the epistructure and handle as a unit from the parent substrate. The method further includes causing the epistructure and handle unit to conform to a shape that differs from the shape the epistructure otherwise inherently assumes upon removal from the parent substrate. A device prepared according to the disclosed methods.

Food Safety Knowledge, Attitudes, and Behaviors of Native American Families with Young Children: A Mixed Methods Study.

PubMed

Vlasin-Marty, Kara; Ritter-Gooder, Paula; Albrecht, Julie A

2016-12-01

Children are at increased risk for foodborne illness due to underdeveloped immune system. Limited research has been reported on food safety knowledge of Native American families with children 10 years of age and younger. This study was conducted to determine the food safety knowledge, attitudes, and behaviors of the main food preparer in these families by collecting quantitative and qualitative data simultaneously in a mixed method approach. A food safety knowledge survey created using FightBAC! ™ concepts was administered prior to focus groups discussions held in Native American communities using a script based upon the Health Belief Model. Quantitative data were analyzed using SPSS. Qualitative data were coded by three reviewers independently and then compared jointly for themes. Over three fourths of participants (n = 102) were female with an average age of 38.3 years. Over one half of participants were unemployed (54 %), lived on reservations (54 %), and 86 % had a high school degree or higher level of education. The following four themes emerged from the eight focus groups (n = 66): food can make one sick, I am not in control when others handle food, I know how to safely prepare foods for my family, and I do not have time or best equipment (for food safety). Mixed method analysis revealed that participants were aware of the severity and susceptibility for foodborne illness but were confident in preparing foods safely for their family. A food safety education program for Native American food preparers with young children is needed to prevent foodborne illness (FBI) in this population and promote safe food handling practice.