Missisquoi Bay Phosphorus Model Addendum

EPA Pesticide Factsheets

This technical memorandum provides results of an extended load reduction simulation. The memorandum serves as an addendum to the main Missisquoi Bay Phosphorus Mass Balance Model report prepared for the Lake Champlain Basin Program by LimnoTech in 2012

Liquid rocket booster study addendum

NASA Technical Reports Server (NTRS)

1990-01-01

Liquid rocket booster study (LRB) addendum to final report is presented in the form of the view-graphs. The following subject areas are covered: LRB launch vehicle concepts; LRB design; propulsion system configurations; LRB boattail for Shuttle-C application; and manned transportation systems.

Selection criteria of the addendum modification coefficients of spur gear pairs with smaller number of pinion teeth

NASA Astrophysics Data System (ADS)

Atanasiu, V.; Oprişan, C.; Leohchi, D.

2016-08-01

A design procedure for the optimum distribution of the addendum modification coefficients of spur gear pairs with smaller number of pinion teeth is presented for the case of a fixed centred distance. The geometrical, kinematics and load capacity criteria are considered in the design analysis. The geometric and kinematics criteria are used to prevent the negative phenomena of the generating and engagement processes. The relation between the contact pressure of meshing teeth and specific sliding are analysed in relation with addendum modification coefficients. A dynamic model is developed to simulate the load sharing characteristics through a mesh cycle. The specific phenomenon of contact tooth pairs alternation during mesh cycle is integrated in this dynamic load modelling. A comparative study is included, which shows the effects of the distribution factor of the addendum modification coefficients on the contact surface characteristics of the gear pairs.

Reforming the American Military Officer Personnel System: Addendum: Thoughts on Contractors

DTIC Science & Technology

2016-05-24

Testimony Reforming the American Military Officer Personnel System Addendum: Thoughts on Contractors Bernard D. Rostker CT-446/1 Document...1 Reforming the American Military Officer Personnel System Addendum: Thoughts on Contractors Testimony of Bernard D. Rostker 1 The RAND...Reform and Strengthening the All-Volunteer Force” on December 2, 2015, comment on the need to understand when contractors are being utilized and

Improved guidelines for estimating the Highway safety manual calibration factors.

DOT National Transportation Integrated Search

2016-01-01

Crash prediction models can be used to predict the number of crashes and evaluate roadway safety. Part C of the first edition of the Highway Safety Manual (HSM) provides safety performance functions (SPFs). The HSM addendum that includes freeway and ...

Xenia Spacecraft Study Addendum: Spacecraft Cost Estimate

NASA Technical Reports Server (NTRS)

Hill, Spencer; Hopkins, Randall

2009-01-01

This slide presentation reviews the Xenia spacecraft cost estimates as an addendum for the Xenia Spacecraft study. The NASA/Air Force Cost model (NAFCPOM) was used to derive the cost estimates that are expressed in 2009 dollars.

Reference Mission Version 3.0 Addendum to the Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team. Addendum; 3.0

NASA Technical Reports Server (NTRS)

Drake, Bret G. (Editor)

1998-01-01

This Addendum to the Mars Reference Mission was developed as a companion document to the NASA Special Publication 6107, "Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team." It summarizes changes and updates to the Mars Reference Missions that were developed by the Exploration Office since the final draft of SP 6107 was printed in early 1999. The Reference Mission is a tool used by the exploration community to compare and evaluate approaches to mission and system concepts that could be used for human missions to Mars. It is intended to identify and clarify system drivers, significant sources of cost, performance, risk, and schedule variation. Several alternative scenarios, employing different technical approaches to solving mission and technology challenges, are discussed in this Addendum. Comparing alternative approaches provides the basis for continual improvement to technology investment plan and a general understanding of future human missions to Mars. The Addendum represents a snapshot of work in progress in support of planning for future human exploration missions through May 1998.

77 FR 35699 - Proposed Information Collection; Request for Public Comment: Addendum to Declaration for Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

...; Request for Public Comment: Addendum to Declaration for Federal Employment, Child Care and Indian Child...) for review. Proposed Collection: Title: Addendum to Declaration for Federal Employment, Child Care and Indian Child Care Worker Positions (OMB No. 0917-0028). Type of Information Collection Request: Extension...

46 CFR Appendix IV to Part 390 - Sample Addendum to Maritime Administration Capital Construction Fund Agreement

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Sample Addendum to Maritime Administration Capital Construction Fund Agreement IV Appendix IV to Part 390 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF... 390—Sample Addendum to Maritime Administration Capital Construction Fund Agreement This Agreement...

76 FR 65512 - Record of Decision Addendum for the Department of Homeland Security Headquarters Consolidation at...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

... parts 1500-1508), GSA Order PBS P 1095.1F (Environmental considerations in decision-making, dated... Decision Addendum for the Department of Homeland Security Headquarters Consolidation at St. Elizabeths in...). ACTION: Record of Decision Addendum. SUMMARY: Pursuant to the requirements of the National Environmental...

Statistical Models of At-Grade Intersection Accidents. Addendum.

DOT National Transportation Integrated Search

2000-03-01

This report is an addendum to the work published in FHWA-RD-96-125 titled Statistical Models of At-Grade Intersection Accidents. The objective of both research studies was to develop statistical models of the relationship between traffic accide...

MR 201424 Final Report Addendum

DTIC Science & Technology

2016-09-01

FINAL REPORT ADDENDUM Munitions Classification Library ESTCP Project MR-201424 SEPTEMBER 2016 Mr. Craig Murray Dr. Nagi Khadr Parsons Dr...solver and multi-solver library databases, and only the TEMTADS 2X2 and the MetalMapper advanced TEM systems are supported by UX-Analyze, data on...other steps (section 3.4) before getting into the data collection activities (sections 3.5-3.7). All inversions of library quality data collected over

Vaccine Immunotherapy for Prostate Cancer. Addendum

DTIC Science & Technology

2007-07-01

a hemostatic agent. It is a water-insoluble, off-white, non- elastic, porous, pliable product prepared from purified pork skin. The Gelfoam gelatin ...increasing gelatin volume (27). PROTOCOL #1 Lubaroff; final addendum report, page 8 The mechanism of action of surface-mediated hemostatic devices is...and the clinical protocol. 3.2.14 Allergy or religious objection to pork products; Gelfoam is produced from pork. 4. Registration Procedures

Action Plan for Florida's Public Libraries. Addendum.

ERIC Educational Resources Information Center

Florida Library Study Commission, Tallahassee.

The introduction to this addendum (the Action Plan is LI 004 521) discusses the present use by libraries of information-handling technology and identifies some of the trends taking place in performing essential library services. While some limited inroads have been made in automating certain public library functions, the bulk of services is still…

Human Exploration of Mars Design Reference Architecture 5.0, Addendum #2

NASA Technical Reports Server (NTRS)

Drake, Bret G. (Editor); Watts Kevin D. (Editor)

2014-01-01

This report serves as the second Addendum to NASA-SP-2009-566, "Human Exploration of Mars Design Reference Architecture 5.0." The data and descriptions contained within this Addendum capture some of the key assessments and studies produced since publication of the original document, predominately covering those conducted from 2009 through 2012. The assessments and studies described herein are for the most part independent stand-alone contributions. Effort has not been made to assimilate the findings to provide an updated integrated strategy. That is a recognized future effort. This report should not be viewed as constituting a formal plan for the human exploration of Mars.

Addendum to the AAPM's TG-51 protocol for clinical reference dosimetry of high-energy photon beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

McEwen, Malcolm, E-mail: malcolm.mcewen@nrc-cnrc.gc.ca; DeWerd, Larry; Ibbott, Geoffrey

2014-04-15

An addendum to the AAPM's TG-51 protocol for the determination of absorbed dose to water in megavoltage photon beams is presented. This addendum continues the procedure laid out in TG-51 but new k{sub Q} data for photon beams, based on Monte Carlo simulations, are presented and recommendations are given to improve the accuracy and consistency of the protocol's implementation. The components of the uncertainty budget in determining absorbed dose to water at the reference point are introduced and the magnitude of each component discussed. Finally, the consistency of experimental determination of N{sub D,w} coefficients is discussed. It is expected thatmore » the implementation of this addendum will be straightforward, assuming that the user is already familiar with TG-51. The changes introduced by this report are generally minor, although new recommendations could result in procedural changes for individual users. It is expected that the effort on the medical physicist's part to implement this addendum will not be significant and could be done as part of the annual linac calibration.« less

Addendum to the Handbook of Accreditation. Second Edition.

ERIC Educational Resources Information Center

North Central Association of Colleges and Schools, Chicago, IL. Higher Learning Commission.

This document supplements information provided in the "Handbook of Accreditation," Second Edition (Commission on Institutions of Higher Education). The Addendum contains the information necessary to keep readers informed of changes in policies and procedures while the Commission is engaged in an initiative to revise its Eligibility…

Education in Utah: A Call to Action. Addendum.

ERIC Educational Resources Information Center

Utah State Board of Education, Salt Lake City.

Clarifications to recommendations made in the Utah Education Reform Committee report, "A Call to Action," are presented in this addendum. Earlier recommendations relating to teachers are revised and clarified and new ones relating to class size, teachers' duties, instructional materials, and the student-parent-school relationship are…

78 FR 57873 - 60-Day Notice of Proposed Information Collection: HUD-Owned Real Estate-Sales Contract and Addendums

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-20

... Information Collection: HUD-Owned Real Estate--Sales Contract and Addendums AGENCY: Office of the Assistant... Information Collection Title of Information Collection: HUD-Owned Real Estate--Sales Contract and Addendums... Information and Proposed Use: This collection of information consists of the sales contracts and addenda that...

78 FR 64145 - 30-Day Notice of Proposed Information Collection: HUD-Owned Real Estate-Sales Contract and Addendums

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Information Collection: HUD-Owned Real Estate--Sales Contract and Addendums AGENCY: Office of the Chief... Collection Title of Information Collection: HUD-Owned Real Estate--Sales Contract and Addendums. OMB Approval... sales contracts and addenda that will be used in binding contracts between purchasers of acquired single...

SU-E-T-204: Comparison of Absorbed-Dose to Water in High-Energy Photon Beams Based On Addendum AAPM TG-51, IAEA TRS-398, and JSMP 12

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinoshita, N; Kita, A; Yoshioka, C

Purpose: Several clinical reference dosimetry protocols for absorbed-dose to water have recently been published: The American Association of Physicists in Medicine (AAPM) published an Addendum to the AAPM’s TG-51 (Addendum TG-51) in April 2014, and the Japan Society of Medical Physics (JSMP) published the Japan Society of Medical Physics 12 (JSMP12), a clinical reference dosimetry protocol, in September 2012. This investigation compared and evaluated the absorbed-dose to water of high-energy photon beams according to Addendum TG-51, International Atomic Energy Agency Technical Report Series No. 398 (TRS-398), and JSMP12. Methods: Differences in the respective beam quality conversion factors with Addendum TG-51,more » TRS-398, and JSMP12 were analyzed and the absorbed-dose to water using 6- and 10-MV photon beams was measured according to the protocols recommended in Addendum TG-51, TRS-398, and JSMP12. The measurements were conducted using two Farmer-type ionization chambers, Exradin A12 and PTW 30013. Results: The beam quality conversion factors for both the 6- and 10-MV photon beams with Addendum TG-51 were within 0.6%, in agreement with the beam quality conversion factors with TRS-398 and JSMP12. The Exradin A12 provided an absorbed-dose to water ratio from 1.003 to 1.006 with TRS-398 / Addendum TG-51 and from 1.004 to 1.005 with JSMP 12 / Addendum TG-51, whereas the PTW 30013 provided a ratio of 1.001 with TRS-398 / Addendum TG-51 and a range from 0.997 to 0.999 with JSMP 12 / Addendum TG-51. Conclusion: Despite differences in the beam quality conversion factor, no major differences were seen in the absorbed-dose to water with Addendum TG-51, TRS-398, and JSMP12. However, Addendum TG-51 provides the most recent data for beam quality conversion factors based on Monte Carlo simulation and greater detail for the measurement protocol. Therefore, the absorbed-dose to water measured with Addendum TG-51 is an estimate with less uncertainty.« less

Volpe Aircraft Noise Certification Instrumentation Validation, Data Submittal Guidance; [Addendum to Letter Report V324-FB48B3-LR2

DOT National Transportation Integrated Search

2017-09-15

This addendum to Volpe Letter Report V324-FB48B3-LR2 provides guidance for applicants submitting data and information for validation of noise measurement, recording, and analysis instrumentation systems. Such validation is required by Federal Aviatio...

Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose

This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standardmore » Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.« less

Acquisition of specialized testing equipment for advanced cement-based materials : addendum.

DOT National Transportation Integrated Search

2014-07-01

The purpose of this addendum is to cover the installation cost associated with several of the specialized pieces of : equipment purchased in project 00038844. See report below from Missouri S&T Physical Facilities itemizing the scope of : work and as...

32 CFR Appendix C to Part 68 - Addendum for Education Services Between [Name of Educational Institution] and the U.S. Army

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Addendum for Education Services Between [Name of Educational Institution] and the U.S. Army C Appendix C to Part 68 National Defense Department of Defense..., App. C Appendix C to Part 68—Addendum for Education Services Between [Name of Educational Institution...

77 FR 7131 - Addendum to Environmental Technologies Trade Advisory Committee Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... DEPARTMENT OF COMMERCE International Trade Administration Addendum to Environmental Technologies... agenda of a meeting of the Environmental Technologies Trade Advisory Committee (ETTAC) will be changed to... & Environmental Industries, International Trade Administration, Room 4053, 1401 Constitution Avenue NW...

Addendum Guidelines for the Prevention of Peanut Allergy in the United States

PubMed Central

Togias, Alkis; Cooper, Susan F.; Acebal, Maria L.; Assa’ad, Amal; Baker, James R.; Beck, Lisa A.; Block, Julie; Byrd-Bredbenner, Carol; Chan, Edmond S.; Eichenfield, Lawrence F.; Fleischer, David M.; Fuchs, George J.; Furuta, Glenn T.; Greenhawt, Matthew J.; Gupta, Ruchi S.; Habich, Michele; Jones, Stacie M.; Keaton, Kari; Muraro, Antonella; Plaut, Marshall; Rosenwasser, Lanny J.; Rotrosen, Daniel; Sampson, Hugh A.; Schneider, Lynda C.; Sicherer, Scott H.; Sidbury, Robert; Spergel, Jonathan; Stukus, David R.; Venter, Carina; Boyce, Joshua A.

2016-01-01

Background Food allergy is an important public health problem because it affects children and adults, it may be severe and even life-threatening, and it may be increasing in prevalence. Beginning in 2008, the National Institute of Allergy and Infectious Diseases (NIAID), working with other organizations and advocacy groups, led the development of the first clinical guidelines for the diagnosis and management of food allergy. A recent landmark clinical trial and other emerging data suggest that peanut allergy can be prevented through introduction of peanut-containing foods beginning in infancy. Objectives Prompted by these findings, along with 25 professional organizations, federal agencies, and patient advocacy groups, NIAID facilitated development of Addendum Guidelines to specifically address the prevention of peanut allergy. Results The Addendum provides three separate guidelines for infants at various risk levels for development of peanut allergy and is intended for use by a wide variety of health care providers. Topics addressed include the definition of risk categories, appropriate use of testing (specific IgE, skin prick testing, and oral food challenge) and the timing and approaches for introduction of peanut-containing foods in the health care provider’s office or at home. The Addendum Guidelines provide the background, rationale, and strength of evidence for each recommendation. Conclusions Guidelines have been developed for early introduction of peanut-containing foods into the diets of infants at various risk levels for peanut allergy. PMID:28065278

Comparison of AAPM Addendum to TG-51, IAEA TRS-398, and JSMP 12: Calibration of photon beams in water.

PubMed

Kinoshita, Naoki; Oguchi, Hiroshi; Nishimoto, Yasuhiro; Adachi, Toshiki; Shioura, Hiroki; Kimura, Hirohiko; Doi, Kunio

2017-09-01

The American Association of Physicists in Medicine (AAPM) Working Group on TG-51 published an Addendum to the AAPM's TG-51 protocol (Addendum to TG-51) in 2014, and the Japan Society of Medical Physics (JSMP) published a new dosimetry protocol JSMP 12 in 2012. In this study, we compared the absorbed dose to water determined at the reference depth for high-energy photon beams following the recommendations given in AAPM TG-51 and the Addendum to TG-51, IAEA TRS-398, and JSMP 12. This study was performed using measurements with flattened photon beams with nominal energies of 6 and 10 MV. Three widely used ionization chambers with different compositions, Exradin A12, PTW 30013, and IBA FC65-P, were employed. Fully corrected charge readings obtained for the three chambers according to AAPM TG-51 and the Addendum to TG-51, which included the correction for the radiation beam profile (P rp ), showed variations of 0.2% and 0.3% at 6 and 10 MV, respectively, from the readings corresponding to IAEA TRS-398 and JSMP 12. The values for the beam quality conversion factor k Q obtained according to the three protocols agreed within 0.5%; the only exception was a 0.6% difference between the results obtained at 10 MV for Exradin A12 according to IAEA TRS-398 and AAPM TG-51 and the Addendum to TG-51. Consequently, the values for the absorbed dose to water obtained for the three protocols agreed within 0.4%; the only exception was a 0.6% difference between the values obtained at 10 MV for PTW 30013 according to AAPM TG-51 and the Addendum to TG-51, and JSMP 12. While the difference in the absorbed dose to water determined by the three protocols depends on the k Q and P rp values, the absorbed dose to water obtained according to the three protocols agrees within the relative uncertainties for the three protocols. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Some Thoughts on Stability in Nonlinear Periodic Focusing Systems [Addendum

DOE R&D Accomplishments Database

McMillan, Edwin M.

1968-03-29

Addendum to September 5, 1967 report with the same title and with the abstract: A brief discussion is given of the long-term stability of particle motions through periodic focusing structures containing lumped nonlinear elements. A method is presented whereby one can specify the nonlinear elements in such a way as to generate a variety of structures in which the motion has long-term stability.

77 FR 21782 - International Conference on Harmonisation; Draft Guidance for Industry on E2C(R2) Periodic...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... electronic submission of individual case safety reports to regulatory authorities, automated data mining... Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (E2C guidance) and ``Addendum to E2C Clinical Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (addendum...

ADDENDUM TO ASSESSMENT OF STYRENE EMISSION CONTROLS FOR FRP/C AND BOAT BUILDING INDUSTRIES

EPA Science Inventory

This report is an addendum to a 1996 report, Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries. It presents additional evaluation of the biological treatment of styrene emissions, Dow Chemical Company's Sorbathene solvent vapor recovery system, Occupa...

FRA/Volpe Center Task Force Observation of Operations at TVE Transrapid Test Facility, Addendum

DOT National Transportation Integrated Search

1993-12-01

This report is an addendum to a report (No. DOT-VNTSC-RR393-PM-93-1) prepared in April : 1993 describing the operations witnessed and the relevant information obtained by nine members : of the FRA/Volpe Center High Speed Guided Ground Transportation ...

Addendum to ‘Understanding risks in the light of uncertainty: low-probability, high-impact coastal events in cities’

NASA Astrophysics Data System (ADS)

Galarraga, Ibon; Sainz de Murieta, Elisa; Markandya, Anil; María Abadie, Luis

2018-02-01

This addendum adds to the analysis presented in ‘Understanding risks in the light of uncertainty: low-probability, high-impact coastal events in cities’ Abadie et al (2017 Environ. Res. Lett. 12 014017). We propose to use the framework developed earlier to enhance communication and understanding of risks, with the aim of bridging the gap between highly technical risk management discussion to the public risk aversion debate. We also propose that the framework could be used for stress-testing resilience.

SU-F-T-488: Comparison of the TG-51 and TG-51 Addendum Calibration Protocols

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCaw, T; Hwang, M; Jang, S

Purpose: To quantify differences between the TG51 and TG51 addendum calibration protocols. Methods: Beam energies of 6X, 6XSRS, 10X, 15X, 23X, 6XFFF, and 10XFFF were calibrated following both the TG51 and TG51 addendum protocols using both a Farmer and a scanning ionization chamber with traceable absorbed dose-to-water calibrations. For the TG51 addendum procedure, the collimating jaws were positioned to define a 10×10cm{sup 2} radiation field, a lead foil was only used for kQ measurements of FFF energies, and a volume-averaging correction was applied based on crossline and inline dose profiles. For the TG51 procedure, the collimating jaws were set tomore » 10×10cm{sup 2} according to the digital readout, and a lead foil was used for kQ measurements of energies greater than 10MV. Results: For beam energies with a flattening filter, absorbed dose-to-water determined by the two protocols differed by 0.1%–0.3%. For FFF beam energies, differences between the protocols were up to 0.2% and 0.8% for the scanning and Farmer ionization chambers, respectively. Differences between the protocols were due to kQ determination, volume-averaging correction, and measurement of raw ionization. Differences in kQ values between the two protocols were up to 0.4% and 0.2% for the scanning and Farmer ionization chambers, respectively. Volume-averaging corrections were less than 0.1% for the scanning ionization chamber, and up to 0.4% and 0.6% for the Farmer ionization chamber in beams with a flattening filter and FFF beams, respectively. Raw ionization measurements differed up to 0.3%±0.07% due to differences in jaw settings. Conclusion: The TG51 and TG51 addendum calibration protocols differed less than 0.3% for the scanning ionization chamber. For the Farmer chamber in FFF energies, volume-averaging corrections of up to 0.6% contributed to calibration differences of up to 0.8%. Failure to verify the radiation field size can produce calibration differences of up to 0.3%.« less

77 FR 52749 - 30-Day Proposed Information Collection: Addendum to Declaration for Federal Employment, Child...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... Collection: Addendum to Declaration for Federal Employment, Child Care and Indian Child Care Worker Positions... Care and Indian Child Care Worker Positions (OMB No. 0917-0028). Type of Information Collection Request... Declaration for Federal Employment, Child Care and Indian Child Care Worker Positions.'' Although there was a...

Addendum to Effectiveness of Cognitive Tutor Algebra I at Scale. Working Paper WR-1050-DEIES

ERIC Educational Resources Information Center

Pane, John F.; Griffin, Beth Ann; McCaffrey, Daniel F.; Karam, Rita

2014-01-01

This addendum to previously published results presents alternative analyses of data from large-scale effectiveness studies of Cognitive Tutor Algebra I in middle schools and high schools. These alternative analyses produce results that are substantively the same as previously reported. We find a significant positive effect of 0.21 standard…

Addendum to the Closure Report for Corrective Action Unit 357: Mud Pits and Waste Dump, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauss, Mark J

This document constitutes an addendum to the Closure Report for Corrective Action Unit 357: Mud Pits and Waste Dump, Nevada Test Site, Nevada as described in the document Recommendations and Justifications To Remove Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office Federal Facility Agreement and Consent Order dated September 2013. The Use Restriction Removal document was approved by the Nevada Division of Environmental Protection on October 16, 2013. The approval of the UR Removal document constituted approval of each of the recommended UR removals. In conformance with the UR Removal document, thismore » addendum consists of: This page that refers the reader to the UR Removal document for additional information The cover, title, and signature pages of the UR Removal document The NDEP approval letter The corresponding section of the UR Removal document This addendum provides the documentation justifying the cancellation of the UR for CAS 04-26-03, Lead Bricks. This UR was established as part of FFACO corrective actions and was based on the presence of lead contamination at concentrations greater than the action level established at the time of the initial investigation.« less

Beyond Word Processing. In Microsoft Word 5.0 with Word 5.1 Addendum.

ERIC Educational Resources Information Center

Hall, Jean Marie; Yoder, Sharon

This book is designed for use with Microsoft Word 5.0; it includes an addendum covering the new features of Word 5.1. The contents of the book are designed to get individuals started using some of the more advanced techniques available in Word. Some of the ideas presented in the book will be of immediate use and others are more complex. All of the…

Addendum to Richard D. Altick's Chapter Six on Libraries in "The Art of Literary Research."

ERIC Educational Resources Information Center

Moore-Smith, Mary

This addendum is designed to compensate for Altick's omission of materials by or about black writers in "The Art of Literary Research" and to identify some of the most outstanding public, university, and private library holdings in the United States on American blacks, as well as major Afro-American collections. Major public library…

Communication Platform Payload Definition (CPPD) study. Volume 3: Addendum

NASA Technical Reports Server (NTRS)

Hunter, E. M.; Driggers, T.; Jorasch, R.

1986-01-01

This is Volume 3 (Addendum) of the Ford Aerospace & Communications Corporation Final Report for the Communication Platform Payload Definition (CPPD) Study Program conducted for NASA Lewis Research Center under contract No. NAS3-24235. This report presents the results of the study effort leading to five potential platform payloads to service CONUS and WARC Region 2 traffic demand as projected to the year 2008. The report addresses establishing the data bases, developing service aggregation scenarios, selecting and developing 5 payload concepts, performing detailed definition of the 5 payloads, costing them, identifying critical technology, and finally comparing the payloads with each other and also with non-aggregated equivalent services.

Correlation of DCPI with deformation under proof roller loading to assess soft subgrade stabilization criterion : addendum to NCDOT final report 2011-05, entitled : "Field verification of undercut criteria and alternatives for subgrade stabilization in th

DOT National Transportation Integrated Search

2016-11-21

Work presented herein is an addendum to the final report for NCDOT Project 2011-05 entitled : Field Verification of Undercut Criteria and Alternatives for Subgrade Stabilization in the : Piedmont Area. The objective of the addendum work is to p...

Decommissioning of eight surplus production reactors at the Hanford Site, Richland, Washington. Addendum (Final Environmental Impact Statement)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-01

The first section of this volume summarizes the content of the draft environmental impact statement (DEIS) and this Addendum, which together constitute the final environmental impact statement (FEIS) prepared on the decommissioning of eight surplus plutonium production reactors at Hanford. The FEIS consists of two volumes. The first volume is the DEIS as written. The second volume (this Addendum) consists of a summary; Chapter 9, which contains comments on the DEIS and provides DOE`s responses to the comments; Appendix F, which provides additional health effects information; Appendix K, which contains costs of decommissioning in 1990 dollars; Appendix L, which containsmore » additional graphite leaching data; Appendix M, which contains a discussion of accident scenarios; Appendix N, which contains errata; and Appendix 0, which contains reproductions of the letters, transcripts, and exhibits that constitute the record for the public comment period.« less

Model-Based Safety Analysis

NASA Technical Reports Server (NTRS)

Joshi, Anjali; Heimdahl, Mats P. E.; Miller, Steven P.; Whalen, Mike W.

2006-01-01

System safety analysis techniques are well established and are used extensively during the design of safety-critical systems. Despite this, most of the techniques are highly subjective and dependent on the skill of the practitioner. Since these analyses are usually based on an informal system model, it is unlikely that they will be complete, consistent, and error free. In fact, the lack of precise models of the system architecture and its failure modes often forces the safety analysts to devote much of their effort to gathering architectural details about the system behavior from several sources and embedding this information in the safety artifacts such as the fault trees. This report describes Model-Based Safety Analysis, an approach in which the system and safety engineers share a common system model created using a model-based development process. By extending the system model with a fault model as well as relevant portions of the physical system to be controlled, automated support can be provided for much of the safety analysis. We believe that by using a common model for both system and safety engineering and automating parts of the safety analysis, we can both reduce the cost and improve the quality of the safety analysis. Here we present our vision of model-based safety analysis and discuss the advantages and challenges in making this approach practical.

Site inspection addendum. Fort Meade feasibility study and remedial investigation/site inspection Fort George G. Meade, Maryland. Revision 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-01

This Site Inspection Addendum Report has been prepared to address the Site Inspection portion of the Feasibility Study (FS) and Remedial Investigation/Site Inspection (RI/SI) activities at Fort George G. Meade. It has been prepared under Delivery Order No. 009 and a Change Order dated July 15, 1993, for the U.S. Army Environmental Center (USAEC), formerly known as the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA). This report fulfills the requirements of deliverable ELIN A004 under Delivery Order 0009 of the Total Environmental Program Support (TEPS) contract DAAAl5-91-D-00l6. The purpose of this Site Inspection Addendum (SIA) report is to reportmore » the findings of Arthur D. Little`s SIA investigation. The overall purpose of an SI is to evaluate if chemical releases or potential contamination has occurred at suspected sites and to determine if further investigation is warranted. This study is an addendum to a previous SI and addresses data gaps remaining from or identified in that document. Six sites at Fort George G. Meade (FGGM) are included in the SIA: DPDO Salvage Yard and Transform Storage Area; DPDO Salvage Yard and Transformer Storage Area; Fire Training Area; Helicopter Hangar Area; Inactive Landfill No. 2, Ordnance Demolition Area Soldiers Lake.« less

78 FR 76889 - Proposed Addendum to the Interagency Policy Statement on Income Tax Allocation in a Holding...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... Interagency Policy Statement on Income Tax Allocation in a Holding Company Structure AGENCY: Board of... ``Interagency Policy Statement on Income Tax Allocation in a Holding Company Structure'' (63 FR 64757, Nov. 23... appropriate relationship regarding the payment of taxes and treatment of tax refunds. The Proposed Addendum...

Ethics and the Early Childhood Teacher Educator: A Proposed Addendum to the NAEYC Code of Ethical Conduct.

ERIC Educational Resources Information Center

Freeman, Nancy; Feeney, Stephanie; Moravcik, Eva

2003-01-01

Proposes an addendum to the National Association for the Education of Young Children's Code of Ethical Conduct concerning the unique ethical challenges facing teacher educators. Presents a conception of professional responsibility in six areas: children and families, adult students, programs hosting practicum students and programs' staffs and…

77 FR 36569 - Endangered and Threatened Wildlife and Plants; Thick-Billed Parrot Draft Recovery Plan Addendum

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... Addendum for the Thick-billed Parrot under the Endangered Species Act of 1973, as amended (Act). We have... ecosystems is a primary goal of our endangered species program and the Act (16 U.S.C. 1531 et seq.). Recovery... Species Conservation Act (ESCA), the precursor of the Endangered Species Act. Based on the different...

Questions and Answers for Reporting for the 2006 Partial Updating of the TSCA Chemical Inventory Database: Inorganic Chemicals Addendum

EPA Pesticide Factsheets

This document addresses specific questions related to reporting inorganic chemicals under the IUR and is an addendum to the Questions and Answers for Reporting for the 2006 Partial Updating of the TSCA Chemical Inventory Database (Questions and Answers Document).

Midwest Research-to-Practice Conference (10th, St. Paul, Minnesota, October 3-4, 1991). Conference Proceedings [and] Addendum.

ERIC Educational Resources Information Center

Minnesota Univ., Minneapolis. Coll. of Education.

These proceedings and addendum contain 31 papers: "Linking Motivation and Participation in Adult Education" (Babchuk, Courtney); "Workplace Literacy Education as Contextual Learning" (Babchuk, Dirkx); "Model for Focusing Research in Adult Agricultural Education" (Birkenholz et al.); "A Research Agenda for Adult Civic Education" (Boggs,…

75 FR 13312 - National Endowment for the Arts; National Council on the Arts 169th Meeting-Addendum

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES National Endowment for the Arts; National Council on the Arts 169th Meeting--Addendum Pursuant to section 10(a)(2) of the Federal Advisory Committee... (March 9, 2010--Vol. 75 No. 45) regarding the 169th meeting of the National Council on the Arts. A...

76 FR 53942 - Notice of Lodging of First Addendum to Consent Decree Under the Emergency Planning and Community...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... DEPARTMENT OF JUSTICE Notice of Lodging of First Addendum to Consent Decree Under the Emergency Planning and Community Right-To-Know Act, the Clean Water Act, the Resource Conservation and Recovery Act, the Federal Insecticide, Fungicide, and Rodenticide Act, the Comprehensive Environmental Response, Compensation, and Liability Act, the Safe...

AGARD Index of Publications (1952-1970). Part III: Author Index, Part IV: Addendum to Part I,

DTIC Science & Technology

When the AGARD Index of Publications 1952-1970 was published in June 1972, no Author Index was provided. Experience with the basic document has...therefore contains both an Author Index of all publications and papers from 1952-1970 and, in addition, an Addendum containing a listing of the titles of all individual papers that were omitted from the basic document.

Effects of Alaska Oil and Natural Gas Provisions of H. R. 4 and S. 1766 on U.S. Energy Markets, Addendum

EIA Publications

2002-01-01

This addendum provides projections on the increase in U.S. oil production from opening the Arctic National Wildlife Refuge, the decease in net petroleum imports, and the change in net petroleum expenditures across a range of cases.

Comparison of the recommendations of the AAPM TG-51 and TG-51 addendum reference dosimetry protocols.

PubMed

McCaw, Travis J; Hwang, Min-Sig; Jang, Si Young; Huq, M Saiful

2017-07-01

This work quantified differences between recommendations of the TG-51 and TG-51 addendum reference dosimetry protocols. Reference dosimetry was performed for flattened photon beams with nominal energies of 6, 10, 15, and 23 MV, as well as flattening-filter free (FFF) beam energies of 6 and 10 MV, following the recommendations of both the TG-51 and TG-51 addendum protocols using both a Farmer ® ionization chamber and a scanning ionization chamber with calibration coefficients traceable to absorbed dose-to-water (D w ) standards. Differences in D w determined by the two protocols were 0.1%-0.3% for beam energies with a flattening filter, and up to 0.2% and 0.8% for FFF beams measured with the scanning and Farmer ® ionization chambers, respectively, due to k Q determination, volume-averaging correction, and collimator jaw setting. Combined uncertainty was between 0.91% and 1.2% (k = 1), varying by protocol and detector. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

NLS-72-Postsecondary Education Transcript Files. Data User's Manual for Revised Transcript, Term, and Course Files. Supplementary Addendum.

ERIC Educational Resources Information Center

Adelman, Clifford

This addendum describes the nature, rationale, and results of the second cleaning and revision of the National Longitudinal Study of 1972 (NLS-72) Postsecondary Education Transcript Files (PETS). This project, conducted for nearly 3 years, followed an initial cleaning and reduction in 1987, which came about as a reaction to the idiosyncratic…

Addendum to the Corrective Action Decision Document/Closure Report for Corrective Action Unit 529: Area 25 Contaminated Materials, Nevada Test Site, Nevada, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauss, Mark J

This document constitutes an addendum to the Corrective Action Decision Document/Closure Report for Corrective Action Unit 529: Area 25 Contaminated Materials, Nevada Test Site, Nevada as described in the document Recommendations and Justifications To Remove Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office Federal Facility Agreement and Consent Order dated September 2013. The Use Restriction (UR) Removal document was approved by the Nevada Division of Environmental Protection on October 16, 2013. The approval of the UR Removal document constituted approval of each of the recommended UR removals. In conformance with the URmore » Removal document, this addendum consists of: This page that refers the reader to the UR Removal document for additional information The cover, title, and signature pages of the UR Removal document The NDEP approval letter The corresponding section of the UR Removal document This addendum provides the documentation justifying the cancellation of the UR for CAS 25-23-17, Contaminated Wash (Parcel H). This UR was established as part of FFACO corrective actions and was based on the presence of total petroleum hydrocarbon diesel-range organics contamination at concentrations greater than the NDEP action level at the time of the initial investigation.« less

SU-G-TeP2-03: Comparison of Standard Dosimetry Protocol in Japan and AAPM TG-51 Addendum in Order to Establish Optimal Dosimetry for FFF Beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsunaga, T; Adachi, Y; Hayashi, N

Purpose: Japan Standard Dosimetry of Absorbed dose to water in external beam radiotherapy (JSDP12) is widely used to measure radiation dose in radiotherapy. However, JSDP12 does not take flattening-filter-free (FFF) beam into consideration. In addition, JSDP12 applied TPR20,10 for dose quality index for photon beam. The purpose of this study is to compare JSDP12 with AAPM TG-51 addendum in order to establish optimal dosimetry procedure for FFF beam. Method: We evaluated the ion-recombination factor (ks) and the correction factor of radial beam profile (Prp) in FFF beam dosimetry. The ks was introduced by 2 voltages method and verified by Jaffe’smore » plot. The Prp was given by both film measurement and calculation of treatment planning system, and compared them. Next, we compared the dose quality indexes (kQ) between TPR20,10 method and PDD(10)x method. Finally we considered optimal dosimetry protocol for FFF photon beam using JSDP12 with referring TG-51 addendum protocols. The FFF photon beams of 6 MV (6X-FFF) and 10 MV (10X-FFF) from TrueBeam were investigated in this study. Results: The ks for 6X-FFF and 10X-FFF beams were 1.005 and 1.010, respectively. The Prp of 0.6 cc ionization chamber for 6X-FFF and 10X-FFF beams (Film, TPS) were (1.004, 1.008) and (1.005, 1.008), respectively. The kQ for 6X-FFF and 10X-FFF beams (JSDP12, TG-51 addendum) were (0.9950, 0.9947) and (0.9851, 0.9845), respectively. The most effective factor for uncertainty in FFF photon beam measurement was Prp for JSDP12 formalism. Total dosimetric differences between JSDP12 and TG-51 addendum for 6X-FFF and 10X-FFF were -0.47% and -0.73%, respectively. Conclusion: The total dosimetric difference between JSDP12 and TG-51 addendum was within 1%. The introduction of kQ given by JSDP is feasible for FFF photon beam dosimetry. However, we think Prp should be considered for optimal dosimetry procedure even if JSDP12 is used for FFF photon beam dosimetry.« less

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Mariner Mars 1971 television picture catalog: Sequence design and picture coverage, volume 2, addendum 1

NASA Technical Reports Server (NTRS)

Koskela, P. E.

1973-01-01

This addendum to the Mariner Mars 1971 Television Picture Catalog, Volume 2 (for abstract, see N73-20850) contains data for the Mariner 9 TV pictures taken after Rev 262. Some of the data presented in Volume 2 is brought up to date. The new provisional mapping pole is discussed, and tables provide the latitude and longitude with respect to the new pole, prime meridian, and rotation rate for the centerpoints of all the Mariner 9 TV pictures.

Addendum to foundations of multidimensional wave field signal theory: Gaussian source function

NASA Astrophysics Data System (ADS)

Baddour, Natalie

2018-02-01

Many important physical phenomena are described by wave or diffusion-wave type equations. Recent work has shown that a transform domain signal description from linear system theory can give meaningful insight to multi-dimensional wave fields. In N. Baddour [AIP Adv. 1, 022120 (2011)], certain results were derived that are mathematically useful for the inversion of multi-dimensional Fourier transforms, but more importantly provide useful insight into how source functions are related to the resulting wave field. In this short addendum to that work, it is shown that these results can be applied with a Gaussian source function, which is often useful for modelling various physical phenomena.

Addendum to Air Quality: Decision Support Tools, Partner Plans, Working Groups, Committees

NASA Technical Reports Server (NTRS)

Holekamp, Kara; Frisbie, Troy; Estep, Lee

2005-01-01

In the original report dated February 11, 2005, the utility of NASA Earth science data in the air quality activities of other agencies and organizations was assessed by reviewing strategic and mission plans and by conducting personal interviews with agency experts to identify and investigate agencies with the potential for partnership with NASA. The overarching agency strategic plans were reviewed and commonalities such as the desire for partnerships and technology development were noted. This addendum to the original report contains such information about the Tennessee Valley Authority and will be inserted as Section 2.6 of "Air Quality: Decision Support Tools, Partner Plans, Working Groups, Committees."

Addendum to Air Quality: Decision Support Tools, Partner Plans, Working Groups, Committees

NASA Technical Reports Server (NTRS)

Holekamp, Kara; Frisbie, Troy; Estep, Lee

2005-01-01

In the original report dated February 11, 2005, the utility of the NASA Earth science data in the air quality activities of other agencies and organizations was assessed by reviewing strategic and mission plans and by conducting personal interviews with agency experts to identify and investigate agencies with the potential for partnership with NASA. The overarching agency strategic plans were reviewed and commonalities such as the desire for partnerships and technology development were noted. The addendum to the original report contains such information about the Tennessee Valley Authority and will be inserted in Section 2.6 of "Air Quality Decision Support Tools, Partner Plans, Working Groups, Committees".

The Economic and Workforce Development Program (ED>Net) Annual Report, 2001-02 [and] Addendum to FY 01-02 Annual Report.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Economic Development Coordination Network (EDNet).

This document contains an annual report and its addendum from the Economic and Workforce Development Program of California Community Colleges. The annual report provides an overview of the Program's evaluation processes, regional centers, short-term projects, legislation, strategic plan, etc. It also provides vital facts about the program such as…

Note: Derivation of two-photon circular dichroism—Addendum to “Two-photon circular dichroism” [J. Chem. Phys. 62, 1006 (1975)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friese, Daniel H., E-mail: daniel.h.friese@uit.no

2015-09-07

This addendum shows the detailed derivation of the fundamental equations for two-photon circular dichroism which are given in a very condensed form in the original publication [I. Tinoco, J. Chem. Phys. 62, 1006 (1975)]. In addition, some minor errors are corrected and some of the derivations in the original publication are commented.

76 FR 31379 - Notice of Availability of Environmental Assessment and Finding of No Significant Impact for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... for approval as an addendum to the DP, Revision 2 (Derivation of the Site-Specific Soil DCGLs Addendum Soil DCGLs for Thorium and Radium). The revised DP does not change any previously approved remediation... ensures safety and protection of the public and the environment. Environmental Impacts of the Proposed...

10 CFR 830.204 - Documented safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Documented safety analysis. 830.204 Section 830.204 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.204 Documented safety analysis... approval from DOE for the methodology used to prepare the documented safety analysis for the facility...

TU-D-201-03: Results of a Survey On the Implementation of the TG-51 Protocol and Associated Addendum On Reference Dosimetry of External Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, G; Muir, B; Culberson, W

Purpose: The working group on the review and extension of the TG-51 protocol (WGTG51) collected data from American Association of Physicists in Medicine (AAPM) members with respect to their current TG-51 and associated addendum usage in the interest of considering future protocol addenda and guidance on reference dosimetry best practices. This study reports an overview of this survey on dosimetry of external beams. Methods: Fourteen survey questions were developed by WGTG51 and released in November 2015. The questions collected information on reference dosimetry, beam quality specification, and ancillary calibration equipment. Results: Of the 190 submissions completed worldwide (U.S. 70%), 83%more » were AAPM members. Of the respondents, 33.5% implemented the TG-51 addendum, with the maximum calibration difference for any photon beam, with respect to the original TG-51 protocol, being <1% for 97.4% of responses. One major finding is that 81.8% of respondents used the same cylindrical ionization chamber for photon and electron dosimetry, implying that many clinics are foregoing the use of parallel-plate chambers. Other evidence suggests equivalent dosimetric results can be obtained with both cylindrical and parallel-plate chambers in electron beams. This, combined with users comfort with cylindrical chambers for electrons will likely impact recommendations put forward in an upcoming electron beam addendum to the TG-51 protocol. Data collected on ancillary equipment showed 58.2% (45.0%) of the thermometers (barometers) in use for beam calibration had NIST traceable calibration certificates, but 48.4% (42.7%) were never recalibrated. Conclusion: This survey provides a snapshot of TG-51 external beam reference dosimetry practice in radiotherapy centers. Findings demonstrate the rapid take-up of the TG-51 photon beam addendum and raise issues for the WGTG51 to focus on going forward, including guidelines on ancillary equipment and the choice of chamber for electron

Addendum to: Centrality dependence of high-pT D-meson suppression in Pb-Pb collisions at √{{s}_{NN}}=2.76 TeV

NASA Astrophysics Data System (ADS)

Adam, J.; Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agrawal, N.; Ahammed, Z.; Ahn, S. U.; Aimo, I.; Aiola, S.; Ajaz, M.; Akindinov, A.; Alam, S. N.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alfaro Molina, R.; Alici, A.; Alkin, A.; Almaraz, J. R. M.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; Andrei, C.; Andronic, A.; Anguelov, V.; Anielski, J.; Antičić, T.; Antinori, F.; Antonioli, P.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Armesto, N.; Arnaldi, R.; Arsene, I. C.; Arslandok, M.; Audurier, B.; Augustinus, A.; Averbeck, R.; Azmi, M. D.; Bach, M.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Baltasar Dos Santos Pedrosa, F.; Baral, R. C.; Barbano, A. M.; Barbera, R.; Barile, F.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartalini, P.; Barth, K.; Bartke, J.; Bartsch, E.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bello Martinez, H.; Bellwied, R.; Belmont, R.; Belmont-Moreno, E.; Belyaev, V.; Bencedi, G.; Beole, S.; Berceanu, I.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielčík, J.; Bielčíková, J.; Bilandzic, A.; Biswas, R.; Biswas, S.; Bjelogrlic, S.; Blanco, F.; Blau, D.; Blume, C.; Bock, F.; Bogdanov, A.; Bøggild, H.; Boldizsár, L.; Bombara, M.; Book, J.; Borel, H.; Borissov, A.; Borri, M.; Bossú, F.; Botta, E.; Böttger, S.; Braun-Munzinger, P.; Bregant, M.; Breitner, T.; Broker, T. A.; Browning, T. A.; Broz, M.; Brucken, E. J.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buncic, P.; Busch, O.; Buthelezi, Z.; Butt, J. B.; Buxton, J. T.; Caffarri, D.; Cai, X.; Caines, H.; Calero Diaz, L.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Carena, F.; Carena, W.; Castillo Castellanos, J.; Castro, A. J.; Casula, E. A. R.; Cavicchioli, C.; Ceballos Sanchez, C.; Cepila, J.; Cerello, P.; Cerkala, J.; Chang, B.; Chapeland, S.; Chartier, M.; Charvet, J. L.; Chattopadhyay, S.; Chattopadhyay, S.; Chelnokov, V.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Chochula, P.; Choi, K.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Chunhui, Z.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortés Maldonado, I.; Cortese, P.; Cosentino, M. R.; Costa, F.; Crochet, P.; Cruz Albino, R.; Cuautle, E.; Cunqueiro, L.; Dahms, T.; Dainese, A.; Danu, A.; Das, D.; Das, I.; Das, S.; Dash, A.; Dash, S.; De, S.; De Caro, A.; de Cataldo, G.; de Cuveland, J.; De Falco, A.; De Gruttola, D.; De Marco, N.; De Pasquale, S.; Deisting, A.; Deloff, A.; Dénes, E.; D'Erasmo, G.; Di Bari, D.; Di Mauro, A.; Di Nezza, P.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Djuvsland, Ø.; Dobrin, A.; Dobrowolski, T.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Dupieux, P.; Ehlers, R. J.; Elia, D.; Engel, H.; Erazmus, B.; Erdemir, I.; Erhardt, F.; Eschweiler, D.; Espagnon, B.; Estienne, M.; Esumi, S.; Eum, J.; Evans, D.; Evdokimov, S.; Eyyubova, G.; Fabbietti, L.; Fabris, D.; Faivre, J.; Fantoni, A.; Fasel, M.; Feldkamp, L.; Felea, D.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Feuillard, V. J. G.; Figiel, J.; Figueredo, M. A. S.; Filchagin, S.; Finogeev, D.; Fiore, E. M.; Fleck, M. G.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Frankenfeld, U.; Fuchs, U.; Furget, C.; Furs, A.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gallio, M.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Gargiulo, C.; Gasik, P.; Germain, M.; Gheata, A.; Gheata, M.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Giubilato, P.; Gladysz-Dziadus, E.; Glässel, P.; Gomez Ramirez, A.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Grabski, V.; Graczykowski, L. K.; Graham, K. L.; Grelli, A.; Grigoras, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grinyov, B.; Grion, N.; Grosse-Oetringhaus, J. F.; Grossiord, J.-Y.; Grosso, R.; Guber, F.; Guernane, R.; Guerzoni, B.; Gulbrandsen, K.; Gulkanyan, H.; Gunji, T.; Gupta, A.; Gupta, R.; Haake, R.; Haaland, Ø.; Hadjidakis, C.; Haiduc, M.; Hamagaki, H.; Hamar, G.; Hansen, A.; Harris, J. W.; Hartmann, H.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Heide, M.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Hess, B. A.; Hetland, K. F.; Hilden, T. E.; Hillemanns, H.; Hippolyte, B.; Hosokawa, R.; Hristov, P.; Huang, M.; Humanic, T. J.; Hussain, N.; Hussain, T.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Ilkiv, I.; Inaba, M.; Ippolitov, M.; Irfan, M.; Ivanov, M.; Ivanov, V.; Izucheev, V.; Jacobs, P. M.; Jadlovska, S.; Jahnke, C.; Jang, H. J.; Janik, M. A.; Jayarathna, P. H. S. Y.; Jena, C.; Jena, S.; Jimenez Bustamante, R. T.; Jones, P. G.; Jung, H.; Jusko, A.; Kalinak, P.; Kalweit, A.; Kamin, J.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karayan, L.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L. D.; Keil, M.; Khan, K. H.; Khan, M. M.; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Kileng, B.; Kim, B.; Kim, D. W.; Kim, D. J.; Kim, H.; Kim, J. S.; Kim, M.; Kim, M.; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, C.; Klein, J.; Klein-Bösing, C.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobayashi, T.; Kobdaj, C.; Kofarago, M.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Kondratyuk, E.; Konevskikh, A.; Kopcik, M.; Kour, M.; Kouzinopoulos, C.; Kovalenko, O.; Kovalenko, V.; Kowalski, M.; Koyithatta Meethaleveedu, G.; Kral, J.; Králik, I.; Kravčáková, A.; Krelina, M.; Kretz, M.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kubera, A. M.; Kučera, V.; Kugathasan, T.; Kuhn, C.; Kuijer, P. G.; Kulakov, I.; Kumar, A.; Kumar, J.; Kumar, L.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kushpil, S.; Kweon, M. J.; Kwon, Y.; La Pointe, S. L.; La Rocca, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lara, C.; Lardeux, A.; Lattuca, A.; Laudi, E.; Lea, R.; Leardini, L.; Lee, G. R.; Lee, S.; Legrand, I.; Lehas, F.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; León Monzón, I.; Leoncino, M.; Lévai, P.; Li, S.; Li, X.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Ljunggren, H. M.; Lodato, D. F.; Loenne, P. I.; Loginov, V.; Loizides, C.; Lopez, X.; López Torres, E.; Lowe, A.; Luettig, P.; Lunardon, M.; Luparello, G.; Luz, P. H. F. N. D.; Maevskaya, A.; Mager, M.; Mahajan, S.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manko, V.; Manso, F.; Manzari, V.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Margutti, J.; Marín, A.; Markert, C.; Marquard, M.; Martin, N. A.; Martin Blanco, J.; Martinengo, P.; Martínez, M. I.; Martínez García, G.; Martinez Pedreira, M.; Martynov, Y.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Massacrier, L.; Mastroserio, A.; Masui, H.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzoni, M. A.; Mcdonald, D.; Meddi, F.; Melikyan, Y.; Menchaca-Rocha, A.; Meninno, E.; Mercado Pérez, J.; Meres, M.; Miake, Y.; Mieskolainen, M. M.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Minervini, L. M.; Mischke, A.; Mishra, A. N.; Miskowiec, D.; Mitra, J.; Mitu, C. M.; Mohammadi, N.; Mohanty, B.; Molnar, L.; Montaño Zetina, L.; Montes, E.; Morando, M.; Moreira De Godoy, D. A.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Mulligan, J. D.; Munhoz, M. G.; Murray, S.; Musa, L.; Musinsky, J.; Nandi, B. K.; Nania, R.; Nappi, E.; Naru, M. U.; Nattrass, C.; Nayak, K.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Nellen, L.; Ng, F.; Nicassio, M.; Niculescu, M.; Niedziela, J.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Noferini, F.; Nomokonov, P.; Nooren, G.; Noris, J. C. C.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Oh, S. K.; Ohlson, A.; Okatan, A.; Okubo, T.; Olah, L.; Oleniacz, J.; Oliveira Da Silva, A. C.; Oliver, M. H.; Onderwaater, J.; Oppedisano, C.; Orava, R.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Pachmayer, Y.; Pagano, P.; Paić, G.; Pajares, C.; Pal, S. K.; Pan, J.; Pandey, A. K.; Pant, D.; Papcun, P.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, W. J.; Parmar, S.; Passfeld, A.; Paticchio, V.; Patra, R. N.; Paul, B.; Peitzmann, T.; Pereira Da Costa, H.; Pereira De Oliveira Filho, E.; Peresunko, D.; Pérez Lara, C. E.; Perez Lezama, E.; Peskov, V.; Pestov, Y.; Petráček, V.; Petrov, V.; Petrovici, M.; Petta, C.; Piano, S.; Pikna, M.; Pillot, P.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Ploskon, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L. M.; Poghosyan, M. G.; Polichtchouk, B.; Poljak, N.; Poonsawat, W.; Pop, A.; Porteboeuf-Houssais, S.; Porter, J.; Pospisil, J.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puccio, M.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rajput, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Read, K. F.; Real, J. S.; Redlich, K.; Reed, R. J.; Rehman, A.; Reichelt, P.; Reidt, F.; Ren, X.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Rettig, F.; Revol, J.-P.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Ristea, C.; Rivetti, A.; Rocco, E.; Rodríguez Cahuantzi, M.; Rodriguez Manso, A.; Røed, K.; Rogochaya, E.; Rohr, D.; Röhrich, D.; Romita, R.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Sadovsky, S.; Šafařík, K.; Sahlmuller, B.; Sahoo, P.; Sahoo, R.; Sahoo, S.; Sahu, P. K.; Saini, J.; Sakai, S.; Saleh, M. A.; Salgado, C. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Sanchez Castro, X.; Šándor, L.; Sandoval, A.; Sano, M.; Sarkar, D.; Scapparone, E.; Scarlassara, F.; Scharenberg, R. P.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schuchmann, S.; Schukraft, J.; Schulc, M.; Schuster, T.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Seeder, K. S.; Seger, J. E.; Sekiguchi, Y.; Sekihata, D.; Selyuzhenkov, I.; Senosi, K.; Seo, J.; Serradilla, E.; Sevcenco, A.; Shabanov, A.; Shabetai, A.; Shadura, O.; Shahoyan, R.; Shangaraev, A.; Sharma, A.; Sharma, M.; Sharma, M.; Sharma, N.; Shigaki, K.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Sielewicz, K. M.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Simonetti, G.; Singaraju, R.; Singh, R.; Singha, S.; Singhal, V.; Sinha, B. C.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Slupecki, M.; Smirnov, N.; Snellings, R. J. M.; Snellman, T. W.; Søgaard, C.; Soltz, R.; Song, J.; Song, M.; Song, Z.; Soramel, F.; Sorensen, S.; Spacek, M.; Spiriti, E.; Sputowska, I.; Spyropoulou-Stassinaki, M.; Srivastava, B. K.; Stachel, J.; Stan, I.; Stefanek, G.; Steinpreis, M.; Stenlund, E.; Steyn, G.; Stiller, J. H.; Stocco, D.; Strmen, P.; Suaide, A. A. P.; Sugitate, T.; Suire, C.; Suleymanov, M.; Sultanov, R.; Šumbera, M.; Symons, T. J. M.; Szabo, A.; Szanto de Toledo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Takahashi, J.; Tanaka, N.; Tangaro, M. A.; Tapia Takaki, J. D.; Tarantola Peloni, A.; Tarhini, M.; Tariq, M.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terasaki, K.; Terrevoli, C.; Teyssier, B.; Thäder, J.; Thomas, D.; Tieulent, R.; Timmins, A. R.; Toia, A.; Trogolo, S.; Trubnikov, V.; Trzaska, W. H.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Uras, A.; Usai, G. L.; Utrobicic, A.; Vajzer, M.; Vala, M.; Valencia Palomo, L.; Vallero, S.; Van Der Maarel, J.; Van Hoorne, J. W.; van Leeuwen, M.; Vanat, T.; Vande Vyvre, P.; Varga, D.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vauthier, A.; Vechernin, V.; Veen, A. M.; Veldhoen, M.; Velure, A.; Venaruzzo, M.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Verweij, M.; Vickovic, L.; Viesti, G.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Vinogradov, A.; Vinogradov, L.; Vinogradov, Y.; Virgili, T.; Vislavicius, V.; Viyogi, Y. P.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Vranic, D.; Vrláková, J.; Vulpescu, B.; Vyushin, A.; Wagner, B.; Wagner, J.; Wang, H.; Wang, M.; Wang, Y.; Watanabe, D.; Watanabe, Y.; Weber, M.; Weber, S. G.; Wessels, J. P.; Westerhoff, U.; Wiechula, J.; Wikne, J.; Wilde, M.; Wilk, G.; Wilkinson, J.; Williams, M. C. S.; Windelband, B.; Winn, M.; Yaldo, C. G.; Yang, H.; Yang, P.; Yano, S.; Yin, Z.; Yokoyama, H.; Yoo, I.-K.; Yurchenko, V.; Yushmanov, I.; Zaborowska, A.; Zaccolo, V.; Zaman, A.; Zampolli, C.; Zanoli, H. J. C.; Zaporozhets, S.; Zardoshti, N.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zgura, I. S.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zhu, X.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zinovjev, G.; Zyzak, M.

2017-06-01

This is an addendum to the article JHEP 11 (2015) 205 [1]. The figures 3 (right), 4 (right) and 5 are updated with published results on non-prompt J/ ψ-meson production from the CMS collaboration [2]. [Figure not available: see fulltext.

Addendum guidelines for the prevention of peanut allergy in the United States: Report of the National Institute of Allergy and Infectious Diseases-sponsored expert panel.

PubMed

Togias, Alkis; Cooper, Susan F; Acebal, Maria L; Assa'ad, Amal; Baker, James R; Beck, Lisa A; Block, Julie; Byrd-Bredbenner, Carol; Chan, Edmond S; Eichenfield, Lawrence F; Fleischer, David M; Fuchs, George J; Furuta, Glenn T; Greenhawt, Matthew J; Gupta, Ruchi S; Habich, Michele; Jones, Stacie M; Keaton, Kari; Muraro, Antonella; Plaut, Marshall; Rosenwasser, Lanny J; Rotrosen, Daniel; Sampson, Hugh A; Schneider, Lynda C; Sicherer, Scott H; Sidbury, Robert; Spergel, Jonathan; Stukus, David R; Venter, Carina; Boyce, Joshua A

2017-02-01

Food allergy is an important public health problem because it affects children and adults, can be severe and even life-threatening, and may be increasing in prevalence. Beginning in 2008, the National Institute of Allergy and Infectious Diseases, working with other organizations and advocacy groups, led the development of the first clinical guidelines for the diagnosis and management of food allergy. A recent landmark clinical trial and other emerging data suggest that peanut allergy can be prevented through introduction of peanut-containing foods beginning in infancy. Prompted by these findings, along with 25 professional organizations, federal agencies, and patient advocacy groups, the National Institute of Allergy and Infectious Diseases facilitated development of addendum guidelines to specifically address the prevention of peanut allergy. The addendum provides 3 separate guidelines for infants at various risk levels for the development of peanut allergy and is intended for use by a wide variety of health care providers. Topics addressed include the definition of risk categories, appropriate use of testing (specific IgE measurement, skin prick tests, and oral food challenges), and the timing and approaches for introduction of peanut-containing foods in the health care provider's office or at home. The addendum guidelines provide the background, rationale, and strength of evidence for each recommendation. Guidelines have been developed for early introduction of peanut-containing foods into the diets of infants at various risk levels for peanut allergy. Published by Elsevier Inc.

Addendum Guidelines for the Prevention of Peanut Allergy in the United States: Report of the National Institute of Allergy and Infectious Diseases-Sponsored Expert Panel.

PubMed

Togias, Alkis; Cooper, Susan F; Acebal, Maria L; Assa'ad, Amal; Baker, James R; Beck, Lisa A; Block, Julie; Byrd-Bredbenner, Carol; Chan, Edmond S; Eichenfield, Lawrence F; Fleischer, David M; Fuchs, George J; Furuta, Glenn T; Greenhawt, Matthew J; Gupta, Ruchi S; Habich, Michele; Jones, Stacie M; Keaton, Kari; Muraro, Antonella; Plaut, Marshall; Rosenwasser, Lanny J; Rotrosen, Daniel; Sampson, Hugh A; Schneider, Lynda C; Sicherer, Scott H; Sidbury, Robert; Spergel, Jonathan; Stukus, David R; Venter, Carina; Boyce, Joshua A

Food allergy is an important public health problem because it affects children and adults, can be severe and even life-threatening, and may be increasing in prevalence. Beginning in 2008, the National Institute of Allergy and Infectious Diseases, working with other organizations and advocacy groups, led the development of the first clinical guidelines for the diagnosis and management of food allergy. A recent landmark clinical trial and other emerging data suggest that peanut allergy can be prevented through introduction of peanut-containing foods beginning in infancy. Prompted by these findings, along with 25 professional organizations, federal agencies, and patient advocacy groups, the National Institute of Allergy and Infectious Diseases facilitated development of addendum guidelines to specifically address the prevention of peanut allergy. The addendum provides 3 separate guidelines for infants at various risk levels for the development of peanut allergy and is intended for use by a wide variety of health care providers. Topics addressed include the definition of risk categories, appropriate use of testing (specific IgE measurement, skin prick tests, and oral food challenges), and the timing and approaches for introduction of peanut-containing foods in the health care provider's office or at home. The addendum guidelines provide the background, rationale, and strength of evidence for each recommendation. Guidelines have been developed for early introduction of peanut-containing foods into the diets of infants at various risk levels for peanut allergy. Published by Elsevier Inc.

Addendum guidelines for the prevention of peanut allergy in the United States: Report of the National Institute of Allergy and Infectious Diseases-sponsored expert panel.

PubMed

Togias, Alkis; Cooper, Susan F; Acebal, Maria L; Assa'ad, Amal; Baker, James R; Beck, Lisa A; Block, Julie; Byrd-Bredbenner, Carol; Chan, Edmond S; Eichenfield, Lawrence F; Fleischer, David M; Fuchs, George J; Furuta, Glenn T; Greenhawt, Matthew J; Gupta, Ruchi S; Habich, Michele; Jones, Stacie M; Keaton, Kari; Muraro, Antonella; Plaut, Marshall; Rosenwasser, Lanny J; Rotrosen, Daniel; Sampson, Hugh A; Schneider, Lynda C; Sicherer, Scott H; Sidbury, Robert; Spergel, Jonathan; Stukus, David R; Venter, Carina; Boyce, Joshua A

2017-01-01

Food allergy is an important public health problem because it affects children and adults, can be severe and even life-threatening, and may be increasing in prevalence. Beginning in 2008, the National Institute of Allergy and Infectious Diseases, working with other organizations and advocacy groups, led the development of the first clinical guidelines for the diagnosis and management of food allergy. A recent landmark clinical trial and other emerging data suggest that peanut allergy can be prevented through introduction of peanut-containing foods beginning in infancy. Prompted by these findings, along with 25 professional organizations, federal agencies, and patient advocacy groups, the National Institute of Allergy and Infectious Diseases facilitated development of addendum guidelines to specifically address the prevention of peanut allergy. The addendum provides 3 separate guidelines for infants at various risk levels for the development of peanut allergy and is intended for use by a wide variety of health care providers. Topics addressed include the definition of risk categories, appropriate use of testing (specific IgE measurement, skin prick tests, and oral food challenges), and the timing and approaches for introduction of peanut-containing foods in the health care provider's office or at home. The addendum guidelines provide the background, rationale, and strength of evidence for each recommendation. Guidelines have been developed for early introduction of peanut-containing foods into the diets of infants at various risk levels for peanut allergy. Published by Elsevier Inc.

32 CFR Appendix B to Part 68 - Addendum for Education Services Between [Name of Educational Institution] and the U.S. Air Force

Code of Federal Regulations, 2013 CFR

2013-07-01

... Educational Institution] and the U.S. Air Force B Appendix B to Part 68 National Defense Department of Defense...] and the U.S. Air Force 1. Purpose. This addendum is between (Name of Educational Institution), hereafter referred to as the “Institution,” and the United States Air Force (USAF). The purpose of this...

Annual Status Report (Fiscal Year 2011) Composite Analysis of Low-Level Waste Disposal in the Central Plateau at the Hanford Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, W. E.

2012-03-12

In accordance with the U.S. Department of Energy (DOE) requirements in DOE O 435.1 Chg 11, and as implemented by DOE/RL-2000-29, Rev. 22, the DOE Richland Operations Office (DOE-RL) has prepared this annual summary of the composite analysis for fiscal year (FY) 2011 as originally reported in PNNL-118003 (henceforth referred to as the Composite Analysis). The main emphasis of DOE/RL-2000-29, Rev. 2 is to identify additional data and information to enhance the Composite Analysis and the subsequent PNNL-11800 Addendum 14 (hereinafter referred to as the Addendum), and to address secondary issues identified during the review of the Composite Analysis.

Addendum to the Closure Report for Corrective Action Unit 165: Area 25 and 26 Dry Well and Washdown Areas, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauss, Mark J

This document constitutes an addendum to the Closure Report for Corrective Action Unit 165: Area 25 and 26 Dry Well and Washdown Areas, Nevada Test Site, Nevada as described in the document Recommendations and Justifications To Remove Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office Federal Facility Agreement and Consent Order dated September 2013. The Use Restriction Removal document was approved by the Nevada Division of Environmental Protection on October 16, 2013. The approval of the UR Removal document constituted approval of each of the recommended UR removals. In conformance with themore » UR Removal document, this addendum consists of: This page that refers the reader to the UR Removal document for additional information The cover, title, and signature pages of the UR Removal document The NDEP approval letter The corresponding section of the UR Removal document This addendum provides the documentation justifying the cancellation of the UR for CAS 25-20-01, Lab Drain Dry Well. This UR was established as part of FFACO corrective actions and was based on the presence of tetrachloroethene contamination at concentrations greater than the action level established at the time of the initial investigation. Although total petroleum hydrocarbon diesel-range organics contamination at concentrations greater than the NDEP action level was present at the site, no hazardous constituents of TPH-DRO exceeded the U.S. Environmental Protection Agency (EPA) Region 9 preliminary remediation goals established at the time of the initial investigation.« less

Addendum Guidelines for the Prevention of Peanut Allergy in the United States: Report of the National Institute of Allergy and Infectious Diseases-Sponsored Expert Panel.

PubMed

Togias, Alkis; Cooper, Susan F; Acebal, Maria L; Assa'ad, Amal; Baker, James R; Beck, Lisa A; Block, Julie; Byrd-Bredbenner, Carol; Chan, Edmond S; Eichenfield, Lawrence F; Fleischer, David M; Fuchs, George J; Furuta, Glenn T; Greenhawt, Matthew J; Gupta, Ruchi S; Habich, Michele; Jones, Stacie M; Keaton, Kari; Muraro, Antonella; Plaut, Marshall; Rosenwasser, Lanny J; Rotrosen, Daniel; Sampson, Hugh A; Schneider, Lynda C; Sicherer, Scott H; Sidbury, Robert; Spergel, Jonathan; Stukus, David R; Venter, Carina; Boyce, Joshua A

2017-01-01

Food allergy is an important public health problem because it affects children and adults, can be severe and even life-threatening, and may be increasing in prevalence. Beginning in 2008, the National Institute of Allergy and Infectious Diseases, working with other organizations and advocacy groups, led the development of the first clinical guidelines for the diagnosis and management of food allergy. A recent landmark clinical trial and other emerging data suggest that peanut allergy can be prevented through introduction of peanut-containing foods beginning in infancy. Prompted by these findings, along with 25 professional organizations, federal agencies, and patient advocacy groups, the National Institute of Allergy and Infectious Diseases facilitated development of addendum guidelines to specifically address the prevention of peanut allergy. The addendum provides three separate guidelines for infants at various risk levels for the development of peanut allergy and is intended for use by a wide variety of health care providers. Topics addressed include the definition of risk categories, appropriate use of testing (specific IgE measurement, skin prick tests, and oral food challenges), and the timing and approaches for introduction of peanut-containing foods in the health care provider's office or at home. The addendum guidelines provide the background, rationale, and strength of evidence for each recommendation. Guidelines have been developed for early introduction of peanut-containing foods into the diets of infants at various risk levels for peanut allergy. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Transportation systems safety hazard analysis tool (SafetyHAT) user guide (version 1.0)

DOT National Transportation Integrated Search

2014-03-24

This is a user guide for the transportation system Safety Hazard Analysis Tool (SafetyHAT) Version 1.0. SafetyHAT is a software tool that facilitates System Theoretic Process Analysis (STPA.) This user guide provides instructions on how to download, ...

A Synthetic Vision Preliminary Integrated Safety Analysis

NASA Technical Reports Server (NTRS)

Hemm, Robert; Houser, Scott

2001-01-01

This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

Revised Evaluation of Health Effects Associated with Carbon Monoxide Exposure: An Addendum to the 1979 U.S. EPA Air Quality Criteria Document for Carbon Monoxide (1984)

EPA Science Inventory

The addendum re-evaluates the scientific data base concerning health effects associated with exposure to carbon monoxide (CO) at ambient or near ambient levels by providing: (1) a concise summary of key health effects information pertaining to relatively low-level CO exposure; an...

Flavonoid Values for USDA Survey Foods and Beverages 2007-2008: Provisional Flavonoid Addendum, FNDDS 4.1 and Flavonoid Intake Data, WWEIA, NHANES 2007-2008

USDA-ARS?s Scientific Manuscript database

This release of the Flavonoid Values for Survey Foods and Beverages 2007-2008 makes possible, for the first time, calculation of flavonoid intakes based on all foods and beverages reported in national surveys. This release has two components. The first component is an addendum to USDA’s Food and N...

Addendum to the Closure Report for Corrective Action Unit 403: Second Gas Station, Tonopah Test Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Closure Report for Corrective Action Unit 403: Second Gas Station, Tonopah Test Range, Nevada, September 1998 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additional information • The cover, title, and signature pagesmore » of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the UR for CAS 03-02-004-0360, Underground Storage Tanks. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was reevaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not present at the site above the risk-based FALs. Requirements for inspecting and maintaining this UR will be canceled, and the postings and signage at this site will be removed. Fencing and posting may be present at this site that are unrelated to the

NASA satellite communications application research, phase 2 addendum. Efficient high power, solid state amplifier for EHF communications

NASA Technical Reports Server (NTRS)

Benet, James

1994-01-01

This document is an addendum to the NASA Satellite Communications Application Research (SCAR) Phase 2 Final Report, 'Efficient High Power, Solid State Amplifier for EHF Communications.' This report describes the work performed from 1 August 1993 to 11 March 1994, under contract number NASW-4513. During this reporting period an array of transistor amplifiers was repaired by replacing all MMIC amplifier chips. The amplifier array was then tested using three different feedhorn configurations. Descriptions, procedures, and results of this testing are presented in this report, and conclusions are drawn based on the test results obtained.

49 CFR 229.307 - Safety analysis.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

49 CFR 229.307 - Safety analysis.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

49 CFR 229.307 - Safety analysis.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

10 CFR 830.206 - Preliminary documented safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Preliminary documented safety analysis. 830.206 Section 830.206 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.206 Preliminary documented safety analysis. If construction begins after December 11, 2000, the contractor...

Deep Borehole Disposal Safety Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, Geoffrey A.; Stein, Emily; Price, Laura L.

This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept.more » It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.« less

System safety engineering analysis handbook

NASA Technical Reports Server (NTRS)

Ijams, T. E.

1972-01-01

The basic requirements and guidelines for the preparation of System Safety Engineering Analysis are presented. The philosophy of System Safety and the various analytic methods available to the engineering profession are discussed. A text-book description of each of the methods is included.

State Implementation Plans; General Preamble & Lead (Pb) Addendum for the Implementation of Title I of the Clean Air Act (CAA) Amendments of 1990 (57 FR 13498 & 58 FR 67748)

EPA Pesticide Factsheets

This page contains a copy of the 1993 & 1993 Federal Register publications of the State Implementation Plans (SIPs); General Preamble & Lead (Pb) Addendum for the Implementation of Title I of the Clean Air Act (CAA) Amendments of 1990.

Health and Safety Plan for Waste Area Grouping 6 at Oak Ridge National Laboratory, Oak Ridge, Tennessee. Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Hoesen, S.D.; Clark, C. Jr.; Burman, S.N.

1993-12-01

The Martin Marietta Energy Systems, Inc. (Energy Systems), policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at Waste Area Grouping (WAG) 6 at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to safety and health (S&H) issues. The plan is written to utilize past experience and best management practices to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactivemore » materials to air, soil, or surface water This plan explains additional site-specific health and safety requirements such as Site Specific Hazards Evaluation Addendums (SSHEAs) to the Site Safety and Health Plan which should be used in concert with this plan and existing established procedures.« less

SRB Safety Analysis

NASA Image and Video Library

2003-09-11

Jeff Thon, an SRB mechanic with United Space Alliance, is lowered into a mockup of a segment of a solid rocket booster. He is testing a technique for vertical SRB propellant grain inspection. The inspection of segments is required as part of safety analysis.

Infusing Reliability Techniques into Software Safety Analysis

NASA Technical Reports Server (NTRS)

Shi, Ying

2015-01-01

Software safety analysis for a large software intensive system is always a challenge. Software safety practitioners need to ensure that software related hazards are completely identified, controlled, and tracked. This paper discusses in detail how to incorporate the traditional reliability techniques into the entire software safety analysis process. In addition, this paper addresses how information can be effectively shared between the various practitioners involved in the software safety analyses. The author has successfully applied the approach to several aerospace applications. Examples are provided to illustrate the key steps of the proposed approach.

Technical Review Report for the Mound 1KW Package Safety Analysis Report for Packaging Waiver for the Use of Modified Primary Containment Vessel (PCV)

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, M; Hafner, R

2008-05-05

This Technical Review Report (TRR) documents the review, performed by the Lawrence Livermore National Laboratory (LLNL) staff, at the request of the U.S. Department of Energy (DOE), on the Waiver for the Use of Modified Primary Containment Vessels (PCV). The waiver is to be used to support a limited number of shipments of fuel for the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) Project in support of the National Aeronautics and Space Administration's (NASA's) Mars Science Laboratory (MSL) mission. Under the waiver, an inventory of existing national security PCVs will be converted to standard PCVs. Both types of PCVs are currently approvedmore » for use by the Office of Nuclear Energy. LLNL has previously reviewed the national security PCVs under Mound 1KW Package Safety Analysis Report for Packaging, Addendum No. 1, Revision c, dated June 2007 (Addendum 1). The safety analysis of the package is documented in the Safety Analysis Report for Packaging (SARP) for the Mound 1KW Package (i.e., the Mound 1KW SARP, or the SARP) where the standard PCVs have been reviewed by LLNL. The Mound 1KW Package is certified by DOE Certificate of Compliance (CoC) number USA/9516/B(U)F-85 for the transportation of Type B quantities of plutonium heat source material. The waiver requests an exemption, claiming safety equivalent to the requirements specified in 10 CFR 71.12, Specific Exemptions, and will lead to a letter amendment to the CoC. Under the waiver, the Office of Radioisotope Power Systems, NE-34, is seeking an exemption from 10 CFR 71.19(d)(1), Previously Approved Package,[5] which states: '(d) NRC will approve modifications to the design and authorized contents of a Type B package, or a fissile material package, previously approved by NRC, provided--(1) The modifications of a Type B package are not significant with respect to the design, operating characteristics, or safe performance of the containment system, when the package is subjected to the tests

Concept analysis of safety climate in healthcare providers.

PubMed

Lin, Ying-Siou; Lin, Yen-Chun; Lou, Meei-Fang

2017-06-01

To report an analysis of the concept of safety climate in healthcare providers. Compliance with safe work practices is essential to patient safety and care outcomes. Analysing the concept of safety climate from the perspective of healthcare providers could improve understanding of the correlations between safety climate and healthcare provider compliance with safe work practices, thus enhancing quality of patient care. Concept analysis. The electronic databases of CINAHL, MEDLINE, PubMed and Web of Science were searched for literature published between 1995-2015. Searches used the keywords 'safety climate' or 'safety culture' with 'hospital' or 'healthcare'. The concept analysis method of Walker and Avant analysed safety climate from the perspective of healthcare providers. Three attributes defined how healthcare providers define safety climate: (1) creation of safe working environment by senior management in healthcare organisations; (2) shared perception of healthcare providers about safety of their work environment; and (3) the effective dissemination of safety information. Antecedents included the characteristics of healthcare providers and healthcare organisations as a whole, and the types of work in which they are engaged. Consequences consisted of safety performance and safety outcomes. Most studies developed and assessed the survey tools of safety climate or safety culture, with a minority consisting of interventional measures for improving safety climate. More prospective studies are needed to create interventional measures for improving safety climate of healthcare providers. This study is provided as a reference for use in developing multidimensional safety climate assessment tools and interventional measures. The values healthcare teams emphasise with regard to safety can serve to improve safety performance. Having an understanding of the concept of and interventional measures for safety climate allows healthcare providers to ensure the safety of their

Interchange Safety Analysis Tool (ISAT) : user manual

DOT National Transportation Integrated Search

2007-06-01

This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

Addendum to the East Tennessee Technology Park Site-Wide Residual Contamination Remedial Investigation Work Plan Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

SAIC

2011-04-01

The East Tennessee Technology Park Site-Wide Residual Contamination Remedial Investigation Work Plan (DOE 2004) describes the planned fieldwork to support the remedial investigation (RI) for residual contamination at the East Tennessee Technology Park (ETTP) not addressed in previous Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) decisions. This Addendum describes activities that will be conducted to gather additional information in Zone 1 of the ETTP for groundwater, surface water, and sediments. This Addendum has been developed from agreements reached in meetings held on June 23, 2010, August 25, 2010, October 13, 2010, November 13, 2010, December 1, 2010,more » and January 13, 2011, with representatives of the U. S. Department of Energy (DOE), U. S. Environmental Protection Agency (EPA), and Tennessee Department of Environment and Conservation (TDEC). Based on historical to recent groundwater data for ETTP and the previously completed Sitewide Remedial Investigation for the ETTP (DOE 2007a), the following six areas of concern have been identified that exhibit groundwater contamination downgradient of these areas above state of Tennessee and EPA drinking water maximum contaminant levels (MCLs): (1) K-720 Fly Ash Pile, (2) K-770 Scrap Yard, (3) Duct Island, (4) K-1085 Firehouse Burn/J.A. Jones Maintenance Area, (5) Contractor's Spoil Area (CSA), and (6) Former K-1070-A Burial Ground. The paper presents a brief summary of the history of the areas, the general conceptual models for the observed groundwater contamination, and the data gaps identified.« less

Site Safety Plan for Lawrence Livermore National Laboratory CERCLA investigations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bainer, R.; Duarte, J.

1993-07-01

The safety policy of LLNL is to take every reasonable precaution in the performance of work to protect the environment and the health and safety of employees and the public, and to prevent property damage. With respect to hazardous agents, this protection is provided by limiting human exposures, releases to the environment, and contamination of property to levels that are as low as reasonably achievable (ALARA). It is the intent of this Plan to supply the broad outline for completing environmental investigations within ALARA guidelines. It may not be possible to determine actual working conditions in advance of the work;more » therefore, planning must allow the opportunity to provide a range of protection based upon actual working conditions. Requirements will be the least restrictive possible for a given set of circumstances, such that work can be completed in an efficient and timely fashion. Due to the relatively large size of the LLNL Site and the different types of activities underway, site-specific Operational Safety Procedures (OSPs) will be prepared to supplement activities not covered by this Plan. These site-specific OSPs provide the detailed information for each specific activity and act as an addendum to this Plan, which provides the general plan for LLNL Main Site operation.« less

Addendum to the Closure Report for Corrective Action Unit 398: Area 25 Spill Sites, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the April 2003, Closure Report for Corrective Action Unit 398: Area 25 Spill Sites as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of: • Thismore » cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the UR for CAS 25-25-17, Subsurface Hydraulic Oil Spill. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not present at the site

Addendum to the Closure Report for Corrective Action Unit 214: Bunkers and Storage Areas Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the September 2006, Closure Report for Corrective Action Unit 214: Bunkers and Storage Areas as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of: • Thismore » cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 25-23-01, Contaminated Materials • CAS 25-23-19, Radioactive Material Storage These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation

Addendum to the Closure Report for Corrective Action Unit 326: Areas 6 and 27 Release Sites, Nevada Test Site, Nevada, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Closure Report for Corrective Action Unit 326: Areas 6 and 27 Release Sites, Nevada Test Site, Nevada (Revision 1), December 2002 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additional information • Themore » cover, title, and signature pages of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the UR for CAS 06-25-01, CP-1 Heating Oil Release. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was reevaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not present at the site above the risk-based FALs. Requirements for inspecting and maintaining this UR will be canceled, and the postings and signage at this site will be removed. Fencing and posting may be present at this site that are

Systems Analysis of NASA Aviation Safety Program: Final Report

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

Information Services at the Nuclear Safety Analysis Center.

ERIC Educational Resources Information Center

Simard, Ronald

This paper describes the operations of the Nuclear Safety Analysis Center. Established soon after an accident at the Three Mile Island nuclear power plant near Harrisburg, Pennsylvania, its efforts were initially directed towards a detailed analysis of the accident. Continuing functions include: (1) the analysis of generic nuclear safety issues,…

Meta-analysis of surgical safety checklist effects on teamwork, communication, morbidity, mortality, and safety.

PubMed

Lyons, Vanessa E; Popejoy, Lori L

2014-02-01

The purpose of this study is to examine the effectiveness of surgical safety checklists on teamwork, communication, morbidity, mortality, and compliance with safety measures through meta-analysis. Four meta-analyses were conducted on 19 studies that met the inclusion criteria. The effect size of checklists on teamwork and communication was 1.180 (p = .003), on morbidity and mortality was 0.123 (p = .003) and 0.088 (p = .001), respectively, and on compliance with safety measures was 0.268 (p < .001). The results indicate that surgical safety checklists improve teamwork and communication, reduce morbidity and mortality, and improve compliance with safety measures. This meta-analysis is limited in its generalizability based on the limited number of studies and the inclusion of only published research. Future research is needed to examine possible moderating variables for the effects of surgical safety checklists.

Addendum to the Closure Report for Corrective Action Unit 411: Double Tracks Plutonium Dispersion (Nellis), Nevada Test and Training Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burmeister, Mark

2016-11-01

The Corrective Action Unit (CAU) 411 Closure Report (CR) was published in June 2016 (NNSA/NFO, 2016). The purpose of this addendum is to clarify language in the CR relating to the field instrument for the detection of low-energy radiation (FIDLER), provide the waste disposal documentation for waste generated during the corrective action investigation (CAI), and reference a letter from the U.S. Air Force (USAF) regarding the closure of CAU 411.

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Safety analysis and review system (SARS) assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browne, E.T.

1981-03-01

Under DOE Order 5481.1, Safety Analysis and Review System for DOE Operations, safety analyses are required for DOE projects in order to ensure that: (1) potential hazards are systematically identified; (2) potential impacts are analyzed; (3) reasonable measures have been taken to eliminate, control, or mitigate the hazards; and (4) there is documented management authorization of the DOE operation based on an objective assessment of the adequacy of the safety analysis. This report is intended to provide the DOE Office of Plans and Technology Assessment (OPTA) with an independent evaluation of the adequacy of the ongoing safety analysis effort. Asmore » part of this effort, a number of site visits and interviews were conducted, and FE SARS documents were reviewed. The latter included SARS Implementation Plans for a number of FE field offices, as well as safety analysis reports completed for certain FE operations. This report summarizes SARS related efforts at the DOE field offices visited and evaluates the extent to which they fulfill the requirements of DOE 5481.1.« less

Software Safety Analysis of a Flight Guidance System

NASA Technical Reports Server (NTRS)

Butler, Ricky W. (Technical Monitor); Tribble, Alan C.; Miller, Steven P.; Lempia, David L.

2004-01-01

This document summarizes the safety analysis performed on a Flight Guidance System (FGS) requirements model. In particular, the safety properties desired of the FGS model are identified and the presence of the safety properties in the model is formally verified. Chapter 1 provides an introduction to the entire project, while Chapter 2 gives a brief overview of the problem domain, the nature of accidents, model based development, and the four-variable model. Chapter 3 outlines the approach. Chapter 4 presents the results of the traditional safety analysis techniques and illustrates how the hazardous conditions associated with the system trace into specific safety properties. Chapter 5 presents the results of the formal methods analysis technique model checking that was used to verify the presence of the safety properties in the requirements model. Finally, Chapter 6 summarizes the main conclusions of the study, first and foremost that model checking is a very effective verification technique to use on discrete models with reasonable state spaces. Additional supporting details are provided in the appendices.

Transmittal of the Calculation Package that Supports the Analysis of Performance of the Environmental Management Waste Management Facility Oak Ridge, Tennessee (Based 5-Cell Design Issued 8/14/09)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams M.J.

2009-09-14

This document presents the results of an assessment of the performance of a build-out of the Environmental Management Waste Management Facility (EMWMF). The EMWMF configuration that was assessed includes the as-constructed Cells 1 through 4, with a groundwater underdrain that was installed beneath Cell 3 during the winter of 2003-2004, and Cell 5, whose proposed design is an Addendum to Remedial Design Report for the Disposal of Oak Ridge Reservation Comprehensive Environmental Response, Compensation, and Liability Act of 1980 Waste, Oak Ridge, Tennessee, DOE/OR/01-1873&D2/A5/R1. The total capacity of the EMWMF with 5 cells is about 1.7 million cubic yards. Thismore » assessment was conducted to determine the conditions under which the approved Waste Acceptance Criteria (WAC) for the EMWMF found in the Attainment Plan for Risk/Toxicity-Based Waste Acceptance Criteria at the Oak Ridge Reservation, Oak Ridge, Tennessee [U.S. Department of Energy (DOE) 2001a], as revised for constituents added up to October 2008, would remain protective of public health and safety for a five-cell disposal facility. For consistency, the methods of analyses and the exposure scenario used to predict the performance of a five-cell disposal facility were identical to those used in the Remedial Investigation and Feasibility Study (RI/FS) and its addendum (DOE 1998a, DOE 1998b) to develop the approved WAC. To take advantage of new information and design changes departing from the conceptual design, the modeling domain and model calibration were upaded from those used in the RI/FS and its addendum. It should be noted that this analysis is not intended to justify or propose a change in the approved WAC.« less

Project health and safety plan for the Gunite and Associated Tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abston, J.P.

1997-04-01

The Lockheed Martin Energy Systems, Inc. (Energy Systems) policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at the Gunite and Associated Tanks (GAAT) in the North and South Tank Farms (NTF and STF) at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to health and safety (H and S) issues. The policy and procedures in this plan apply to all GAAT operations in the NTF and STF. The provisions of this plan are to bemore » carried out whenever activities identifies s part of the GAAT are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices in order to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to the air. This plan explains additional task-specific health and safety requirements such as the Site Safety and health Addendum and Activity Hazard Analysis, which should be used in concert with this plan and existing established procedures.« less

Addendum to the Closure Report for Corrective Action Unit 339: Area 12 Fleet Operations Steam Cleaning Discharge Area, Nevada Test Site, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Closure Report for CAU 339: Area 12 Fleet Operations Steam Cleaning Discharge Area Nevada Test Site, December 1997 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additional information • The cover, title, andmore » signature pages of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the UR for CAS 12-19-01, A12 Fleet Ops Steam Cleaning Efflu. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was reevaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not present at the site above the risk-based FALs. Requirements for inspecting and maintaining this UR will be canceled, and the postings and signage at this site will be removed. Fencing and posting may be present at this site that are unrelated

Addendum to the Closure Report for Corrective Action Unit 356: Mud Pits and Disposal Sites Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the November 2002, Closure Report for Corrective Action Unit 356: Mud Pits and Disposal Sites as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of: •more » This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 03-04-01, Area 3 Change House Septic System • CAS 03-09-04, Mud Pit These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove

International Aerospace and Ground Conference on Lightning and Static Electricity (15th) Held in Atlantic City, New Jersey on October 6 - 8, 1992. Addendum

DTIC Science & Technology

1992-11-01

November 1992 1992 INTERNATIONAL AEROSPACE AND GROUND CONFERENCE 6. Perfrming Orgnis.aten Code ON LIGHTNING AND STATIC ELECTRICITY - ADDENDUM 111...October 6-8 1992 Program and the Federal Aviation Administration 14. Sponsoring Agency Code Technical Center ACD-230 15. Supplementary Metes The NICG...area]. The program runs well on an IBM PC or compatible 386 with a math co-processor 387 chip and a VGA monitor. For this study, streamers were added

Demonstration of a Safety Analysis on a Complex System

NASA Technical Reports Server (NTRS)

Leveson, Nancy; Alfaro, Liliana; Alvarado, Christine; Brown, Molly; Hunt, Earl B.; Jaffe, Matt; Joslyn, Susan; Pinnell, Denise; Reese, Jon; Samarziya, Jeffrey;

Motorcoach and school bus fire safety analysis.

DOT National Transportation Integrated Search

2016-11-01

This report documents a motorcoach and school bus fire safety analysis performed by the John A. Volpe National Transportation Systems Center (Volpe) for the Federal Motor Carrier Safety Administration. This report aims to: 1) identify the causes, fre...

10 CFR 72.248 - Safety analysis report updating.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.248 Section 72.248 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF... Approval of Spent Fuel Storage Casks § 72.248 Safety analysis report updating. (a) Each certificate holder...

Comprehensive Safety Analysis 2010 Safety Measurement System (SMS) Methodology, Version 2.1 Revised December 2010

DOT National Transportation Integrated Search

2010-12-01

This report documents the Safety Measurement System (SMS) methodology developed to support the Comprehensive Safety Analysis 2010 (CSA 2010) Initiative for the Federal Motor Carrier Safety Administration (FMCSA). The SMS is one of the major tools for...

Defining attributes of patient safety through a concept analysis.

PubMed

Kim, Linda; Lyder, Courtney H; McNeese-Smith, Donna; Leach, Linda Searle; Needleman, Jack

2015-11-01

The aim of this study was to report an analysis of the concept of patient safety. Despite recent increase in the number of work being done to clarify the concept and standardize measurement of patient safety, there are still huge variations in how the term is conceptualized and how to measure patient safety data across various healthcare settings and in research. Concept analysis. A literature search was conducted through PubMed and Cumulative Index to Nursing and Allied Health Literature, Plus using the terms 'patient safety' in the title and 'concept analysis,' 'attributes' or 'definition' in the title and or abstract. All English language literature published between 2002-2014 were considered for the review. Walker and Avant's method guided this analysis. The defining attributes of patient safety include prevention of medical errors and avoidable adverse events, protection of patients from harm or injury and collaborative efforts by individual healthcare providers and a strong, well-integrated healthcare system. The application of Collaborative Alliance of Nursing Outcomes indicators as empirical referents would facilitate the measurement of patient safety. With the knowledge gained from this analysis, nurses may improve patient surveillance efforts that identify potential hazards before they become adverse events and have a stronger voice in health policy decision-making that influence implementation efforts aimed at promoting patient safety, worldwide. Further studies are needed on development of a conceptual model and framework that can aid with collection and measurement of standardized patient safety data. © 2015 John Wiley & Sons Ltd.

Supplement to the Second Addendum (1986) to Air Quality Criteria for Particulate Matter and Sulfur Oxides (1982): Assessment of New Findings on Sulfur Dioxide and Acute Exposure Health Effects in Asthmatic Individuals (1994)

EPA Science Inventory

The present Supplement to the Second Addendum (1986) to the document Air Quality Criteria for Particulate Matter and Sulfur Oxides (1982) focuses on evaluation of newly available controlled human exposure studies of acute (a\\1h) sulfur dioxide (SO2) exposure effects on pulmonary ...

Addendum to the Closure Report for Corrective Action Unit 113: Area 25 R-MAD Facility, Nevada National Security Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

2011-02-24

This addendum to the Closure Report for Corrective Action Unit 113: Area 25, Reactor Maintenance, Assembly, and Disassembly Facility, Building 3110, Nevada Test Site, Nevada, DOE/NV--891-VOL I-Rev. 1, dated July 2003, provides details of demolition, waste disposal, and use restriction (UR) modification for Corrective Action Unit 113, Area 25 R-MAD Facility. Demolition was completed on July 15, 2010, when the last of the building debris was disposed. Final field activities were concluded on August 30, 2010, after all equipment was demobilized and UR signs were posted. This work was funded by the American Recovery and Reinvestment Act.

Addendum 2 to the Closure Report for Corrective Action Unit 358: Areas 18, 19, 20 Cellars/Mud Pits, Nevada Test Site, Nevada, Revison 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Closure Report for Corrective Action Unit 358: Areas 18, 19, 20 Cellars/Mud Pits, Nevada Test Site, Nevada, January 2004 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additional information • The cover, title,more » and signature pages of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the UR for CAS 19-09-05, Mud Pit. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was reevaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not present at the site above the risk-based FALs. Requirements for inspecting and maintaining this UR will be canceled, and the postings and signage at this site will be removed. Fencing and posting may be present at this site that are unrelated to the FFACO UR such

Integrated Safety Analysis Tiers

NASA Technical Reports Server (NTRS)

Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

2009-01-01

Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

Reveley, Mary S.

2003-01-01

The goal of the NASA Aviation Safety Program (AvSP) is to develop and demonstrate technologies that contribute to a reduction in the aviation fatal accident rate by a factor of 5 by the year 2007 and by a factor of 10 by the year 2022. Integrated safety analysis of day-to-day operations and risks within those operations will provide an understanding of the Aviation Safety Program portfolio. Safety benefits analyses are currently being conducted. Preliminary results for the Synthetic Vision Systems (SVS) and Weather Accident Prevention (WxAP) projects of the AvSP have been completed by the Logistics Management Institute under a contract with the NASA Glenn Research Center. These analyses include both a reliability analysis and a computer simulation model. The integrated safety analysis method comprises two principal components: a reliability model and a simulation model. In the reliability model, the results indicate how different technologies and systems will perform in normal, degraded, and failed modes of operation. In the simulation, an operational scenario is modeled. The primary purpose of the SVS project is to improve safety by providing visual-flightlike situation awareness during instrument conditions. The current analyses are an estimate of the benefits of SVS in avoiding controlled flight into terrain. The scenario modeled has an aircraft flying directly toward a terrain feature. When the flight crew determines that the aircraft is headed toward an obstruction, the aircraft executes a level turn at speed. The simulation is ended when the aircraft completes the turn.

Addendum to the Closure Report for Corrective Action Unit 342: Area 23 Mercury Fire Training Pit Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the April 2000, Closure Report for Corrective Action Unit 342: Area 23 Mercury Fire Training Pit as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of:more » • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the UR for CAS 23-56-01, Former Mercury Fire Training Pit. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR because contamination is not

COLD-SAT feasibility study safety analysis

NASA Technical Reports Server (NTRS)

Mchenry, Steven T.; Yost, James M.

1991-01-01

The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

Addendum to the Closure Report for Corrective Action Unit 262: Area 25 Septic Systems and Underground Discharge Point, Nevada Test Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

2008-10-01

This document constitutes an addendum to the July 2003, Closure Report for Corrective Action Unit 262: Area 25 Septic Systems and Underground Discharge Point as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications.

Improving safety on rural local and tribal roads site safety analysis - user guide #1.

DOT National Transportation Integrated Search

2014-08-01

This User Guide presents an example of how rural local and Tribal practitioners can study conditions at a preselected site. It demonstrates the step-by-step safety analysis process presented in Improving Safety on Rural Local and Tribal Roads Saf...

Addendum to the Closure Report for Corrective Action Unit 358: Areas 18, 19, 20 Cellars/Mud Pits Nevada Test Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the January 2004, Closure Report for Corrective Action Unit 358: Areas 18, 19, 20 Cellars/Mud Pits as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of:more » • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 20-23-02, Postshot Cellar • CAS 20-23-03, Cellar • CAS 20-23-04, Postshot Cellar • CAS 20-23-05, Postshot Cellar • CAS 20-23-06, Cellar • CAS 20-37-01, Cellar & Mud Pit • CAS 20-37-05, Cellar These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk

Safety and business benefit analysis of NASA's aviation safety program

DOT National Transportation Integrated Search

2004-09-20

NASA Aviation Safety Program elements encompass a wide range of products that require both public and private investment. Therefore, two methods of analysis, one relating to the public and the other to the private industry, must be combined to unders...

Addendum to the Closure Report for Corrective Action Unit 427: Area 3 Septic Waste Systems 2, 6, Tonopah Test Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the April 1999, Closure Report for Corrective Action Unit 427: Area 3 Septic Waste Systems 2, 6, Tonopah Test Range, Nevada as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modificationmore » document, this addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 03-05-002-SW02, Septic Waste System • CAS 03-05-002-SW06, Septic Waste System These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re

Addendum to the Closure Report for Corrective Action Unit 335: Area 6 Injection Well and Drain Pit Nevada Test Site, Nevada, Revison 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the June 2003, Closure Report for Corrective Action Unit 335: Area 6 Injection Well and Drain Pit as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consistsmore » of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 06-20-02, 20-inch Cased Hole • CAS 06-23-03, Drain Pit These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove these URs

Recent Progresses in Nanobiosensing for Food Safety Analysis

PubMed Central

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-01-01

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014–present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly. PMID:27447636

Recent Progresses in Nanobiosensing for Food Safety Analysis.

PubMed

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-07-19

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

Mine safety assessment using gray relational analysis and bow tie model

PubMed Central

2018-01-01

Mine safety assessment is a precondition for ensuring orderly and safety in production. The main purpose of this study was to prevent mine accidents more effectively by proposing a composite risk analysis model. First, the weights of the assessment indicators were determined by the revised integrated weight method, in which the objective weights were determined by a variation coefficient method and the subjective weights determined by the Delphi method. A new formula was then adopted to calculate the integrated weights based on the subjective and objective weights. Second, after the assessment indicator weights were determined, gray relational analysis was used to evaluate the safety of mine enterprises. Mine enterprise safety was ranked according to the gray relational degree, and weak links of mine safety practices identified based on gray relational analysis. Third, to validate the revised integrated weight method adopted in the process of gray relational analysis, the fuzzy evaluation method was used to the safety assessment of mine enterprises. Fourth, for first time, bow tie model was adopted to identify the causes and consequences of weak links and allow corresponding safety measures to be taken to guarantee the mine’s safe production. A case study of mine safety assessment was presented to demonstrate the effectiveness and rationality of the proposed composite risk analysis model, which can be applied to other related industries for safety evaluation. PMID:29561875

Safety analysis in test facility design

NASA Astrophysics Data System (ADS)

Valk, A.; Jonker, R. J.

1990-09-01

The application of safety analysis techniques as developed in, for example nuclear and petrochemical industry, can be very beneficial in coping with the increasing complexity of modern test facility installations and their operations. To illustrate the various techniques available and their phasing in a project, an overview of the most commonly used techniques is presented. Two case studies are described: the hazard and operability study techniques and safety zoning in relation to the possible presence of asphyxiating atmospheres.

Requirements Analysis for the Army Safety Management Information System (ASMIS)

DTIC Science & Technology

1989-03-01

8217_>’ Telephone Number « .. PNL-6819 Limited Distribution Requirements Analysis for the Army Safety Management Information System (ASMIS) Final...PNL-6819 REQUIREMENTS ANALYSIS FOR THE ARMY SAFETY MANAGEMENT INFORMATION SYSTEM (ASMIS) FINAL REPORT J. S. Littlefield A. L. Corrigan March...accidents. This accident data is available under the Army Safety Management Information System (ASMIS) which is an umbrella for many databases

Posttest analysis of the FFTF inherent safety tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padilla, A. Jr.; Claybrook, S.W.

Inherent safety tests were performed during 1986 in the 400-MW (thermal) Fast Flux Test Facility (FFTF) reactor to demonstrate the effectiveness of an inherent shutdown device called the gas expansion module (GEM). The GEM device provided a strong negative reactivity feedback during loss-of-flow conditions by increasing the neutron leakage as a result of an expanding gas bubble. The best-estimate pretest calculations for these tests were performed using the IANUS plant analysis code (Westinghouse Electric Corporation proprietary code) and the MELT/SIEX3 core analysis code. These two codes were also used to perform the required operational safety analyses for the FFTF reactormore » and plant. Although it was intended to also use the SASSYS systems (core and plant) analysis code, the calibration of the SASSYS code for FFTF core and plant analysis was not completed in time to perform pretest analyses. The purpose of this paper is to present the results of the posttest analysis of the 1986 FFTF inherent safety tests using the SASSYS code.« less

Relationships between psychological safety climate facets and safety behavior in the rail industry: a dominance analysis.

PubMed

Morrow, Stephanie L; McGonagle, Alyssa K; Dove-Steinkamp, Megan L; Walker, Curtis T; Marmet, Matthew; Barnes-Farrell, Janet L

2010-09-01

The goals of this study were twofold: (1) to confirm a relationship between employee perceptions of psychological safety climate and safety behavior for a sample of workers in the rail industry and (2) to explore the relative strengths of relationships between specific facets of safety climate and safety behavior. Non-management rail maintenance workers employed by a large North American railroad completed a survey (n=421) regarding workplace safety perceptions and behaviors. Three facets of safety climate (management safety, coworker safety, and work-safety tension) were assessed as relating to individual workers' reported safety behavior. All three facets were significantly associated with safety behavior. Dominance analysis was used to assess the relative importance of each facet as related to the outcome, and work-safety tension evidenced the strongest relationship with safety behavior. Published by Elsevier Ltd.

Roadway safety analysis methodology for Utah : final report.

DOT National Transportation Integrated Search

2016-12-01

This research focuses on the creation of a three-part Roadway Safety Analysis methodology that applies and automates the cumulative work of recently-completed roadway safety research. The first part is to prepare the roadway and crash data for analys...

Addendum to the Closure Report for Corrective Action Unit 423: Area 3 Building 03-60 Underground Discharge Point, Tonopah Test Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the July 1999, Closure Report for Corrective Action Unit 423: Area 3 Building 0360 Underground Discharge Point, Tonopah Test Range, Nevada as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modificationmore » document, this addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the UR for CAS 03-02-002-0308, Underground Discharge Point. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to

Addendum to the Closure Report for Corrective Action Unit 322: Areas 1 & 3 Release Sites and Injection Wells Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the June 2006, Closure Report for Corrective Action Unit 322: Areas 1 & 3 Release Sites and Injection Wells as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, thismore » addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 01-25-01, AST Release • CAS 03-25-03, Mud Plant AST Diesel Release These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 3: Nuclear Safety Analysis Document (NSAD)

NASA Technical Reports Server (NTRS)

1972-01-01

Nuclear safety analysis as applied to a space base mission is presented. The nuclear safety analysis document summarizes the mission and the credible accidents/events which may lead to nuclear hazards to the general public. The radiological effects and associated consequences of the hazards are discussed in detail. The probability of occurrence is combined with the potential number of individuals exposed to or above guideline values to provide a measure of accident and total mission risk. The overall mission risk has been determined to be low with the potential exposure to or above 25 rem limited to less than 4 individuals per every 1000 missions performed. No radiological risk to the general public occurs during the prelaunch phase at KSC. The most significant risks occur from prolonged exposure to reactor debris following land impact generally associated with the disposal phase of the mission where fission product inventories can be high.

A Study on Urban Road Traffic Safety Based on Matter Element Analysis

PubMed Central

Hu, Qizhou; Zhou, Zhuping; Sun, Xu

2014-01-01

This paper examines a new evaluation of urban road traffic safety based on a matter element analysis, avoiding the difficulties found in other traffic safety evaluations. The issue of urban road traffic safety has been investigated through the matter element analysis theory. The chief aim of the present work is to investigate the features of urban road traffic safety. Emphasis was placed on the construction of a criterion function by which traffic safety achieved a hierarchical system of objectives to be evaluated. The matter element analysis theory was used to create the comprehensive appraisal model of urban road traffic safety. The technique was used to employ a newly developed and versatile matter element analysis algorithm. The matter element matrix solves the uncertainty and incompatibility of the evaluated factors used to assess urban road traffic safety. The application results showed the superiority of the evaluation model and a didactic example was included to illustrate the computational procedure. PMID:25587267

A root cause analysis project in a medication safety course.

PubMed

Schafer, Jason J

2012-08-10

To develop, implement, and evaluate team-based root cause analysis projects as part of a required medication safety course for second-year pharmacy students. Lectures, in-class activities, and out-of-class reading assignments were used to develop students' medication safety skills and introduce them to the culture of medication safety. Students applied these skills within teams by evaluating cases of medication errors using root cause analyses. Teams also developed error prevention strategies and formally presented their findings. Student performance was assessed using a medication errors evaluation rubric. Of the 211 students who completed the course, the majority performed well on root cause analysis assignments and rated them favorably on course evaluations. Medication error evaluation and prevention was successfully introduced in a medication safety course using team-based root cause analysis projects.

TA-55 Final Safety Analysis Report Comparison Document and DOE Safety Evaluation Report Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Bond

2001-04-01

This document provides an overview of changes to the currently approved TA-55 Final Safety Analysis Report (FSAR) that are included in the upgraded FSAR. The DOE Safety Evaluation Report (SER) requirements that are incorporated into the upgraded FSAR are briefly discussed to provide the starting point in the FSAR with respect to the SER requirements.

Investigation of safety analysis methods using computer vision techniques

NASA Astrophysics Data System (ADS)

Shirazi, Mohammad Shokrolah; Morris, Brendan Tran

2017-09-01

This work investigates safety analysis methods using computer vision techniques. The vision-based tracking system is developed to provide the trajectory of road users including vehicles and pedestrians. Safety analysis methods are developed to estimate time to collision (TTC) and postencroachment time (PET) that are two important safety measurements. Corresponding algorithms are presented and their advantages and drawbacks are shown through their success in capturing the conflict events in real time. The performance of the tracking system is evaluated first, and probability density estimation of TTC and PET are shown for 1-h monitoring of a Las Vegas intersection. Finally, an idea of an intersection safety map is introduced, and TTC values of two different intersections are estimated for 1 day from 8:00 a.m. to 6:00 p.m.

GAMBIT: the global and modular beyond-the-standard-model inference tool. Addendum for GAMBIT 1.1: Mathematica backends, SUSYHD interface and updated likelihoods

NASA Astrophysics Data System (ADS)

Athron, Peter; Balazs, Csaba; Bringmann, Torsten; Buckley, Andy; Chrząszcz, Marcin; Conrad, Jan; Cornell, Jonathan M.; Dal, Lars A.; Dickinson, Hugh; Edsjö, Joakim; Farmer, Ben; Gonzalo, Tomás E.; Jackson, Paul; Krislock, Abram; Kvellestad, Anders; Lundberg, Johan; McKay, James; Mahmoudi, Farvah; Martinez, Gregory D.; Putze, Antje; Raklev, Are; Ripken, Joachim; Rogan, Christopher; Saavedra, Aldo; Savage, Christopher; Scott, Pat; Seo, Seon-Hee; Serra, Nicola; Weniger, Christoph; White, Martin; Wild, Sebastian

2018-02-01

In Ref. (GAMBIT Collaboration: Athron et. al., Eur. Phys. J. C. arXiv:1705.07908, 2017) we introduced the global-fitting framework GAMBIT. In this addendum, we describe a new minor version increment of this package. GAMBIT 1.1 includes full support for Mathematica backends, which we describe in some detail here. As an example, we backend SUSYHD (Vega and Villadoro, JHEP 07:159, 2015), which calculates the mass of the Higgs boson in the MSSM from effective field theory. We also describe updated likelihoods in PrecisionBit and DarkBit, and updated decay data included in DecayBit.

Motorcoach and school bus fire safety analysis : technology brief.

DOT National Transportation Integrated Search

2016-11-01

In 2009, the Federal Motor Carrier Safety Administration (FMCSA) published findings from a study entitled Motorcoach Fire Safety Analysis. The objective of this study was to gather and analyze information regarding the causes, frequency, and se...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2014 CFR

2014-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2013 CFR

2013-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2010 CFR

2010-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2011 CFR

2011-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2012 CFR

2012-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR 33.75 - Safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a) (1) The applicant must analyze the engine, including the control system, to assess the likely...

Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

PubMed

Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

2018-03-01

Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

Random safety auditing, root cause analysis, failure mode and effects analysis.

PubMed

Ursprung, Robert; Gray, James

2010-03-01

Improving quality and safety in health care is a major concern for health care providers, the general public, and policy makers. Errors and quality issues are leading causes of morbidity and mortality across the health care industry. There is evidence that patients in the neonatal intensive care unit (NICU) are at high risk for serious medical errors. To facilitate compliance with safe practices, many institutions have established quality-assurance monitoring procedures. Three techniques that have been found useful in the health care setting are failure mode and effects analysis, root cause analysis, and random safety auditing. When used together, these techniques are effective tools for system analysis and redesign focused on providing safe delivery of care in the complex NICU system. Copyright 2010 Elsevier Inc. All rights reserved.

Microbial food safety in Ghana: a meta-analysis.

PubMed

Saba, Courage K S; Gonzalez-Zorn, Bruno

2012-12-16

Food safety is a crucial factor in the growth of developing countries worldwide. In this study, we present a meta-analysis of microbiological food safety publications from Ghana. The search words "Ghana food safety", "Ghana food research", and "Ghana food bacteria" were used to search for microbiological food safety publications with related abstracts or titles in PubMed, published between 1997 and 2009. We obtained 183 research articles, from which we excluded articles concerning ready-to-eat microbial fermented foods and waterborne microorganisms as well as articles without abstracts. The criteria used for analysis of these publications were based on an assessment of methodological soundness previously developed for use in the medical field, with some modifications incorporated. The most predominant bacteria in Ghanain foods are Enterobacter spp., Citrobacter spp., Klebsiella spp. and Escherichia spp., which were found to be present in 65%, 50%, 46% and 38% respectively, of the food samples considered in the studies analysed. The most contaminated food samples were macaroni, salad, and milk. Although the methodological quality of the articles was generally sound, most of them did not give directions for future research. Several did not state possible reasons for differences between studies. The microbiological food contamination in Ghana is alarming. However, we found that the downward trend in publications of microbial food safety articles is appalling. Hence a concerted effort in research on food safety is needed in Ghana to help curb the incidence of preventable food-borne disease.

Analysis of a 10% Renewable Portfolio Standard, Addendum

EIA Publications

2003-01-01

On May 8, 2003, Senator Jeff Bingaman, the Ranking Minority Member of the Senate Committee on Energy and Natural Resources, requested an analysis of a nationwide Renewable Portfolio Standard (RPS) program proposed to be amended to energy legislation currently pending before the U.S. Senate. With his request Sen. Bingaman provided specific information on the program to be analyzed. This analysis was prepared in response to his request and projects the impact of the proposed program on energy supply, demand, prices, and emissions. The analysis is based on the Annual Energy Outlook 2003 (AEO2003) projections of energy supply, demand, and prices through 2025, as updated in May 2003.

Reliability Modeling Methodology for Independent Approaches on Parallel Runways Safety Analysis

NASA Technical Reports Server (NTRS)

Babcock, P.; Schor, A.; Rosch, G.

1998-01-01

This document is an adjunct to the final report An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies. That report presents the results of our analysis of the problem of simultaneous but independent, approaches of two aircraft on parallel runways (independent approaches on parallel runways, or IAPR). This introductory chapter presents a brief overview and perspective of approaches and methodologies for performing safety analyses for complex systems. Ensuing chapter provide the technical details that underlie the approach that we have taken in performing the safety analysis for the IAPR concept.

Addendum to the Corrective Action Decision Document/Closure Report for Corrective Action Unit 321: Area 22 Weather Station Fuel Storage Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the August 2001, Corrective Action Decision Document / Closure Report for Corrective Action Unit 321: Area 22 Weather Station Fuel Storage as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modificationmore » document, this addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the UR for CAS 22-99-05, Fuel Storage Area. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove the UR

Galileo and Ulysses missions safety analysis and launch readiness status

NASA Technical Reports Server (NTRS)

Cork, M. Joseph; Turi, James A.

1989-01-01

The Galileo spacecraft, which will release probes to explore the Jupiter system, was launched in October, 1989 as the payload on STS-34, and the Ulysses spacecraft, which will fly by Jupiter en route to a polar orbit of the sun, is presently entering system-test activity in preparation for an October, 1990 launch. This paper reviews the Galileo and Ulysses mission objectives and design approaches and presents details of the missions' safety analysis. The processes used to develop the safety analysis are described and the results of safety tests are presented.

Evaluation of the safety performance of highway alignments based on fault tree analysis and safety boundaries.

PubMed

Chen, Yikai; Wang, Kai; Xu, Chengcheng; Shi, Qin; He, Jie; Li, Peiqing; Shi, Ting

2018-05-19

To overcome the limitations of previous highway alignment safety evaluation methods, this article presents a highway alignment safety evaluation method based on fault tree analysis (FTA) and the characteristics of vehicle safety boundaries, within the framework of dynamic modeling of the driver-vehicle-road system. Approaches for categorizing the vehicle failure modes while driving on highways and the corresponding safety boundaries were comprehensively investigated based on vehicle system dynamics theory. Then, an overall crash probability model was formulated based on FTA considering the risks of 3 failure modes: losing steering capability, losing track-holding capability, and rear-end collision. The proposed method was implemented on a highway segment between Bengbu and Nanjing in China. A driver-vehicle-road multibody dynamics model was developed based on the 3D alignments of the Bengbu to Nanjing section of Ning-Luo expressway using Carsim, and the dynamics indices, such as sideslip angle and, yaw rate were obtained. Then, the average crash probability of each road section was calculated with a fixed-length method. Finally, the average crash probability was validated against the crash frequency per kilometer to demonstrate the accuracy of the proposed method. The results of the regression analysis and correlation analysis indicated good consistency between the results of the safety evaluation and the crash data and that it outperformed the safety evaluation methods used in previous studies. The proposed method has the potential to be used in practical engineering applications to identify crash-prone locations and alignment deficiencies on highways in the planning and design phases, as well as those in service.

Addendum to the Closure Report for Corrective Action Unit 394: Areas 12, 18, and 29 Spill/Release Sites Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the September 2003, Closure Report for Corrective Action Unit 394: Areas 12, 18, and 29 Spill/Release Sites as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consistsmore » of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 12-25-04, UST 12-16-2 Waste Oil Release • CAS 18-25-01, Oil Spills • CAS 18-25-02, Oil Spills • CAS 18-25-03, Oil Spill • CAS 29-44-01, Fuel Spill These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using

Probabilistic safety analysis of earth retaining structures during earthquakes

NASA Astrophysics Data System (ADS)

Grivas, D. A.; Souflis, C.

1982-07-01

A procedure is presented for determining the probability of failure of Earth retaining structures under static or seismic conditions. Four possible modes of failure (overturning, base sliding, bearing capacity, and overall sliding) are examined and their combined effect is evaluated with the aid of combinatorial analysis. The probability of failure is shown to be a more adequate measure of safety than the customary factor of safety. As Earth retaining structures may fail in four distinct modes, a system analysis can provide a single estimate for the possibility of failure. A Bayesian formulation of the safety retaining walls is found to provide an improved measure for the predicted probability of failure under seismic loading. The presented Bayesian analysis can account for the damage incurred to a retaining wall during an earthquake to provide an improved estimate for its probability of failure during future seismic events.

14 CFR 33.75 - Safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

14 CFR 33.75 - Safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

14 CFR 33.75 - Safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

14 CFR 33.75 - Safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

Model-Driven Safety Analysis of Closed-Loop Medical Systems

PubMed Central

Pajic, Miroslav; Mangharam, Rahul; Sokolsky, Oleg; Arney, David; Goldman, Julian; Lee, Insup

2013-01-01

In modern hospitals, patients are treated using a wide array of medical devices that are increasingly interacting with each other over the network, thus offering a perfect example of a cyber-physical system. We study the safety of a medical device system for the physiologic closed-loop control of drug infusion. The main contribution of the paper is the verification approach for the safety properties of closed-loop medical device systems. We demonstrate, using a case study, that the approach can be applied to a system of clinical importance. Our method combines simulation-based analysis of a detailed model of the system that contains continuous patient dynamics with model checking of a more abstract timed automata model. We show that the relationship between the two models preserves the crucial aspect of the timing behavior that ensures the conservativeness of the safety analysis. We also describe system design that can provide open-loop safety under network failure. PMID:24177176

Model-Driven Safety Analysis of Closed-Loop Medical Systems.

PubMed

Pajic, Miroslav; Mangharam, Rahul; Sokolsky, Oleg; Arney, David; Goldman, Julian; Lee, Insup

2012-10-26

In modern hospitals, patients are treated using a wide array of medical devices that are increasingly interacting with each other over the network, thus offering a perfect example of a cyber-physical system. We study the safety of a medical device system for the physiologic closed-loop control of drug infusion. The main contribution of the paper is the verification approach for the safety properties of closed-loop medical device systems. We demonstrate, using a case study, that the approach can be applied to a system of clinical importance. Our method combines simulation-based analysis of a detailed model of the system that contains continuous patient dynamics with model checking of a more abstract timed automata model. We show that the relationship between the two models preserves the crucial aspect of the timing behavior that ensures the conservativeness of the safety analysis. We also describe system design that can provide open-loop safety under network failure.

Addendum to the Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 452: Historical Underground Storage Tank Release Sites, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 452: Historical Underground Storage Tank Release Sites, Nevada Test Site, Nevada, April 1998 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additionalmore » information • The cover, title, and signature pages of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the URs for CASs: • 25-25-09, Spill H940825C (from UST 25-3101-1) • 25-25-14, Spill H940314E (from UST 25-3102-3) • 25-25-15, Spill H941020E (from UST 25-3152-1) These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove these URs because contamination is not present at these sites above the risk-based FALs

Addendum to the Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 454: Historical Undrground Storage Tank Release Sites, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the April 1998, Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 454: Historical Underground Storage Tank Release Sites as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modificationmore » document, this addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the UR for CAS 12-25-09, Spill 960722-02 (from UST 12-B-3). This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in

Addendum to the Closure Report for Corrective Action Unit 355: Area 2 Cellars/Mud Pits Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the November 2003, Closure Report for Corrective Action Unit 355: Area 2 Cellars/Mud Pits as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consists of: • Thismore » cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS 02-37-01, Cellar & Mud Pit • CAS 02-37-03, Cellar & Mud Pit • CAS 02-37-04, Cellar & Mud Pit • CAS 02-37-05, Cellar & Mud Pit • CAS 02-37-06, Cellar & Mud Pit • CAS 02-37-07, Cellar & Mud Pit • CAS 02-37-10, Cellar & Mud Pit • CAS 02-37-11, Cellar & Mud Pit • CAS 02-37-12, Cellar & Mud Pit • CAS 02-37-13, Cellar & Mud Pit • CAS 02-37-14, Cellar & Mud Pit • CAS 02-37-15, Cellar & Mud Pit • CAS 02-37-16, Cellar & Mud Pit • CAS 02-37-17, Cellar • CAS 02-37-18, Cellar & Tanks These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have

Applying importance-performance analysis to patient safety culture.

PubMed

Lee, Yii-Ching; Wu, Hsin-Hung; Hsieh, Wan-Lin; Weng, Shao-Jen; Hsieh, Liang-Po; Huang, Chih-Hsuan

2015-01-01

The Sexton et al.'s (2006) safety attitudes questionnaire (SAQ) has been widely used to assess staff's attitudes towards patient safety in healthcare organizations. However, to date there have been few studies that discuss the perceptions of patient safety both from hospital staff and upper management. The purpose of this paper is to improve and to develop better strategies regarding patient safety in healthcare organizations. The Chinese version of SAQ based on the Taiwan Joint Commission on Hospital Accreditation is used to evaluate the perceptions of hospital staff. The current study then lies in applying importance-performance analysis technique to identify the major strengths and weaknesses of the safety culture. The results show that teamwork climate, safety climate, job satisfaction, stress recognition and working conditions are major strengths and should be maintained in order to provide a better patient safety culture. On the contrary, perceptions of management and hospital handoffs and transitions are important weaknesses and should be improved immediately. Research limitations/implications - The research is restricted in generalizability. The assessment of hospital staff in patient safety culture is physicians and registered nurses. It would be interesting to further evaluate other staff's (e.g. technicians, pharmacists and others) opinions regarding patient safety culture in the hospital. Few studies have clearly evaluated the perceptions of healthcare organization management regarding patient safety culture. Healthcare managers enable to take more effective actions to improve the level of patient safety by investigating key characteristics (either strengths or weaknesses) that healthcare organizations should focus on.

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single propeller elements (for example...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

Safety analysis report for packaging (onsite) steel drum

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, W.A.

This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum.

E2C(R2) Periodic Benefit-Risk Evaluation Report and E2C(R2) Periodic Benefit-Risk Evaluation Report--Questions and Answers; International Council for Harmonisation; Guidances for Industry; Availability. Notice.

PubMed

2016-07-19

The Food and Drug Administration (FDA or Agency) is announcing the availability of guidances for industry entitled ``E2C(R2) Periodic Benefit-Risk Evaluation'' (E2C(R2) guidance) and ``E2C(R2) Periodic Benefit-Risk Evaluation Report--Questions and Answers'' (E2C(R2) Q&A guidance). These guidances were prepared under the auspices of the International Council for Harmonisation (ICH), formerly the International Conference on Harmonisation. The E2C(R2) draft guidance, issued April 11, 2012, updated and combined two ICH guidances, ``E2C Clinical Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (E2C guidance) and ``Addendum to E2C Clinical Safety Data Management: Periodic Safety Update Reports for Marketed Drugs'' (addendum to the E2C guidance). The E2C(R2) guidance is intended to describe the format, content, and timing of a Periodic Benefit-Risk Evaluation Report (PBRER) for an approved drug or biologic, and it finalizes the draft guidance. The E2C(R2) Q&A guidance is a supplementary guidance that is intended to clarify key issues in the E2C(R2) guidance.

Analysis of dynamical response of air blast loaded safety device

NASA Astrophysics Data System (ADS)

Tropkin, S. N.; Tlyasheva, R. R.; Bayazitov, M. I.; Kuzeev, I. R.

2018-03-01

Equipment of many oil and gas processing plants in the Russian Federation is considerably worn-out. This causes the decrease of reliability and durability of equipment and rises the accident rate. An air explosion is the one of the most dangerous cases for plants in oil and gas industry, usually caused by uncontrolled emission and inflammation of oil products. Air explosion can lead to significant danger for life and health of plant staff, so it necessitates safety device usage. A new type of a safety device is designed. Numerical simulation is necessary to analyse design parameters and performance of the safety device, subjected to air blast loading. Coupled fluid-structure interaction analysis is performed to determine strength of the protective device and its performance. The coupled Euler-Lagrange method, allowable in Abaqus by SIMULIA, is selected as the most appropriate analysis tool to study blast wave interaction with the safety device. Absorption factors of blast wave are evaluated for the safety device. This factors allow one to assess efficiency of the safety device, and its main structural component – dampener. Usage of CEL allowed one to model fast and accurately the dampener behaviour, and to develop the parametric model to determine safety device sizes.

Sources of Safety Data and Statistical Strategies for Design and Analysis: Clinical Trials.

PubMed

Zink, Richard C; Marchenko, Olga; Sanchez-Kam, Matilde; Ma, Haijun; Jiang, Qi

2018-03-01

There has been an increased emphasis on the proactive and comprehensive evaluation of safety endpoints to ensure patient well-being throughout the medical product life cycle. In fact, depending on the severity of the underlying disease, it is important to plan for a comprehensive safety evaluation at the start of any development program. Statisticians should be intimately involved in this process and contribute their expertise to study design, safety data collection, analysis, reporting (including data visualization), and interpretation. In this manuscript, we review the challenges associated with the analysis of safety endpoints and describe the safety data that are available to influence the design and analysis of premarket clinical trials. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from clinical trials compared to other sources. Clinical trials are an important source of safety data that contribute to the totality of safety information available to generate evidence for regulators, sponsors, payers, physicians, and patients. This work is a result of the efforts of the American Statistical Association Biopharmaceutical Section Safety Working Group.

Limited-scope probabilistic safety analysis for the Los Alamos Meson Physics Facility (LAMPF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharirli, M.; Rand, J.L.; Sasser, M.K.

1992-01-01

The reliability of instrumentation and safety systems is a major issue in the operation of accelerator facilities. A probabilistic safety analysis was performed or the key safety and instrumentation systems at the Los Alamos Meson Physics Facility (LAMPF). in Phase I of this unique study, the Personnel Safety System (PSS) and the Current Limiters (XLs) were analyzed through the use of the fault tree analyses, failure modes and effects analysis, and criticality analysis. Phase II of the program was done to update and reevaluate the safety systems after the Phase I recommendations were implemented. This paper provides a brief reviewmore » of the studies involved in Phases I and II of the program.« less

Limited-scope probabilistic safety analysis for the Los Alamos Meson Physics Facility (LAMPF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharirli, M.; Rand, J.L.; Sasser, M.K.

1992-12-01

The reliability of instrumentation and safety systems is a major issue in the operation of accelerator facilities. A probabilistic safety analysis was performed or the key safety and instrumentation systems at the Los Alamos Meson Physics Facility (LAMPF). in Phase I of this unique study, the Personnel Safety System (PSS) and the Current Limiters (XLs) were analyzed through the use of the fault tree analyses, failure modes and effects analysis, and criticality analysis. Phase II of the program was done to update and reevaluate the safety systems after the Phase I recommendations were implemented. This paper provides a brief reviewmore » of the studies involved in Phases I and II of the program.« less

Addendum report to atmospheric science facility pallet-only mode space transportation system payload feasibility study, volume 3, revision A

NASA Technical Reports Server (NTRS)

1976-01-01

The feasibility of accomplishing selected atmospheric science mission using a pallet-only mode was studied. Certain unresolved issues were identified. The first issue was that of assuring that the on-board computer facility was adequate to process scientific data, control subsystems such as instrument pointing, provide mission operational program capability, and accomplish display and control. The second issue evolved from an investigation of the availability of existing substitute instruments that could be used instead of the prime instrumentation where the development tests and schedules are incompatible with the realistic budgets and shuttle vehicle schedules. Some effort was expended on identifying candidate substitute instruments, and the performance, cost, and development schedule trade-offs found during that effort were significant enough to warrant a follow-on investigation. This addendum documents the results of that follow-on effort, as it applies to the Atmospheric Sciences Facility.

Effect of the Operation of Kerr and Hungry Horse Dams on the Reproductive Success of Kokanee in the Flathead System; Technical Addendum to the Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beattie, Will; Tohtz, Joel

1990-03-01

This addendum to the Final Report presents results of research on the zooplankton and fish communities of Flathead Lade. The intent of the Study has been to identify the impacts of hydroelectric operations at Kerr and Hungry Horse Dam on the reproductive success of kokanee an to propose mitigation for these impacts. Recent changes in the trophic ecology of the lake, have reduced the survival of kokanee. In the last three year the Study has been redirected to identify, if possible, the biological mechanisms which now limit kokanee survival, and to test methods of enhancing the kokanee fishery by artificialmore » supplementation. These studies were necessary to the formulation of mitigation plans. The possibility of successfully rehabilitating the kokanee population, is the doubt because of change in the trophic ecology of the system. This report first presents the results of studies of the population dynamics of crustacean zooplankton, upon which planktivorous fish depend. A modest effort was directed to measuring the spawning escapement of kokanee in 1988. Because of its relevance to the study, we also report assessments of 1989 kokanee spawning escapement. Hydroacoustic assessment of the abundance of all fish species in Flathead Lake was conducted in November, 1988. Summary of the continued efforts to document the growth rates and food habits of kokanee and lake whitefish are included in this report. Revised kokanee spawning and harvest estimates, and management implications of the altered ecology of Flathead Lake comprise the final sections of this addendum. 83 refs., 20 figs., 25 tabs.« less

Addendum 2 to the Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 454: Historical Underground Storage Tank Release Sites, Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant Evenson

This document constitutes an addendum to the Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 454: Historical Underground Storage Tank Release Sites, Nevada Test Site, Nevada, April 1998 as described in the document Supplemental Investigation Report for FFACO Use Restrictions, Nevada Test Site, Nevada (SIR) dated November 2008. The SIR document was approved by NDEP on December 5, 2008. The approval of the SIR document constituted approval of each of the recommended UR removals. In conformance with the SIR document, this addendum consists of: • This page that refers the reader to the SIR document for additionalmore » information • The cover, title, and signature pages of the SIR document • The NDEP approval letter • The corresponding section of the SIR document This addendum provides the documentation justifying the cancellation of the URs for CASs: • 12-25-08, Spill H950524F (from UST 12-B-1) • 12-25-10, Spill H950919A (from UST 12-COMM-1) These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to remove these URs because contamination is not present at these sites above the risk-based FALs. Requirements for inspecting and maintaining these URs

WHO position on the use of fractional doses - June 2017, addendum to vaccines and vaccination against yellow fever WHO: Position paper - June 2013.

PubMed

World Health Organization

2017-10-13

This article presents the World Health Organization's (WHO) recommendations on the use of fractional doses of yellow fever vaccines excerpted from the "Yellow fever vaccine: WHO position on the use of fractional doses - June 2017, Addendum to Vaccines and vaccination against yellow fever WHO: Position Paper - June 2013″, published in the Weekly Epidemiological Record [1,2]. This addendum to the 2013 position paper pertains specifically to use of fractional dose YF (fYF) vaccination (fractional dose yellow fever vaccination refers to administration of a reduced volume of vaccine dose, which has been reconstituted as usual per manufacturer recommendations) in the context of YF vaccine supply shortages beyond the capacity of the global stockpile. The current WHO position on the use of yellow fever (YF) vaccine is set out in the 2013 WHO position paper on vaccines and vaccination against YF and those recommendations are unchanged. Footnotes to this paper provide a number of core references including references to grading tables that assess the quality of the scientific evidence, and to the evidence-to-recommendation table. In accordance with its mandate to provide guidance to Member States on health policy matters, WHO issues a series of regularly updated position papers on vaccines and combinations of vaccines against diseases that have an international public health impact. These papers are concerned primarily with the use of vaccines in large-scale immunization programmes; they summarize essential background information on diseases and vaccines, and conclude with WHO's current position on the use of vaccines in the global context. Recommendations on the use of Yellow Fever vaccines were discussed by SAGE in October 2016; evidence presented at these meetings can be accessed at: www.who.int/immunization/sage/meetings/2016/October/presentations_background_docs/en/. Copyright © 2017. Published by Elsevier Ltd.

The effect of challenge and hindrance stressors on safety behavior and safety outcomes: a meta-analysis.

PubMed

Clarke, Sharon

2012-10-01

The significance of occupational stressors as a risk factor in accidents has long been recognized; however, the behavioral mechanisms underlying this relationship are currently not well-understood. Meta-analysis was utilized to test the relationships between occupational stressors (challenge and hindrance), safety behaviors (compliance and participation), and safety outcomes (occupational injuries and near-misses). It was hypothesized that hindrance stressors would have negative effects on both safety compliance and safety participation, and subsequently, safety outcomes, whereas challenge stressors would have positive effects. The hypotheses relating to hindrance stressors were supported, suggesting that hindrance stressors lead to a significant reduction in both compliance with safety rules and participation in safety-related activities. Hindrance stressors were also associated with higher levels of occupational injuries and near-misses. The relationship between hindrance stressors and occupational injuries was fully mediated by safety behaviors. However, the hypotheses related to challenge stressors were not supported. Challenge stressors had a nonsignificant, near-zero association with compliance and occupational injuries, a small negative association with participation, and a small positive association with near-misses. The theoretical and practical implications of the meta-analytic findings are discussed, as well as avenues for further research.

System analysis of vehicle active safety problem

NASA Astrophysics Data System (ADS)

Buznikov, S. E.

2018-02-01

The problem of the road transport safety affects the vital interests of the most of the population and is characterized by a global level of significance. The system analysis of problem of creation of competitive active vehicle safety systems is presented as an interrelated complex of tasks of multi-criterion optimization and dynamic stabilization of the state variables of a controlled object. Solving them requires generation of all possible variants of technical solutions within the software and hardware domains and synthesis of the control, which is close to optimum. For implementing the task of the system analysis the Zwicky “morphological box” method is used. Creation of comprehensive active safety systems involves solution of the problem of preventing typical collisions. For solving it, a structured set of collisions is introduced with its elements being generated also using the Zwicky “morphological box” method. The obstacle speed, the longitudinal acceleration of the controlled object and the unpredictable changes in its movement direction due to certain faults, the road surface condition and the control errors are taken as structure variables that characterize the conditions of collisions. The conditions for preventing typical collisions are presented as inequalities for physical variables that define the state vector of the object and its dynamic limits.

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

International Aerospace and Ground Conference on Lightning and Static Electricity (8th), Lightning Technology Roundup. Held in Fort Worth, Texas on 21-23 June 1983. Addendum

DTIC Science & Technology

1983-10-01

PHOTOGRAPH THIS SHEET !𔃻P...vTEjAT//V,41 AEP.oSPfqc-/ &rJ Raulvn (C MFCeAX.NC; CA) D LEVEL INVENTORY’z.~~F/ er-/lcn I - CD . A-DDENDUM L’&/NTCJG...061 DATE RECEIVED IN I)TI( REGISTERED OR CERTIFIED NO. PHOTOGRAPH THIS SHEET AM) RI-TURN TO I)TIC-I)I)AC OTIC FORM 70A I’IMNT PRO(ESSIN( SHI’ET...New Jersey 08405 15. Supplementary Noses The NICG consists of members from the U.S. Air Force, U.S. Army, U.S. Navy, NASA , NOAA, and the FAA. lt 16

Linguistic analysis of large-scale medical incident reports for patient safety.

PubMed

Fujita, Katsuhide; Akiyama, Masanori; Park, Keunsik; Yamaguchi, Etsuko Nakagami; Furukawa, Hiroyuki

2012-01-01

The analysis of medical incident reports is indispensable for patient safety. The cycles between analysis of incident reports and proposals to medical staffs are a key point for improving the patient safety in the hospital. Most incident reports are composed from freely written descriptions, but an analysis of such free descriptions is not sufficient in the medical field. In this study, we aim to accumulate and reinterpret findings using structured incident information, to clarify improvements that should be made to solve the root cause of the accident, and to ensure safe medical treatment through such improvements. We employ natural language processing (NLP) and network analysis to identify effective categories of medical incident reports. Network analysis can find various relationships that are not only direct but also indirect. In addition, we compare bottom-up results obtained by NLP with existing categories based on experts' judgment. By the bottom-up analysis, the class of patient managements regarding patients' fallings and medicines in top-down analysis is created clearly. Finally, we present new perspectives on ways of improving patient safety.

Enhancing Safety of Artificially Ventilated Patients Using Ambient Process Analysis.

PubMed

Lins, Christian; Gerka, Alexander; Lüpkes, Christian; Röhrig, Rainer; Hein, Andreas

2018-01-01

In this paper, we present an approach for enhancing the safety of artificially ventilated patients using ambient process analysis. We propose to use an analysis system consisting of low-cost ambient sensors such as power sensor, RGB-D sensor, passage detector, and matrix infrared temperature sensor to reduce risks for artificially ventilated patients in both home and clinical environments. We describe the system concept and our implementation and show how the system can contribute to patient safety.

The geography of patient safety: a topical analysis of sterility.

PubMed

Mesman, Jessica

2009-12-01

Many studies on patient safety are geared towards prevention of adverse events by eliminating causes of error. In this article, I argue that patient safety research needs to widen its analytical scope and include causes of strength as well. This change of focus enables me to ask other questions, like why don't things go wrong more often? Or, what is the significance of time and space for patient safety? The focal point of this article is on the spatial dimension of patient safety. To gain insight into the 'geography' of patient safety and perform a topical analysis, I will focus on one specific kind of space (sterile space), one specific medical procedure (insertion of an intravenous line) and one specific medical ward (neonatology). Based on ethnographic data from research in the Netherlands, I demonstrate how spatial arrangements produce sterility and how sterility work produces spatial orders at the same time. Detailed analysis shows how a sterile line insertion involves the convergence of spatially distributed resources, relocations of the field of activity, an assemblage of an infrastructure of attention, a specific compositional order of materials, and the scaling down of one's degree of mobility. Sterility, I will argue, turns out to be a product of spatial orderings. Simultaneously, sterility work generates particular spatial orders, like open and restricted areas, by producing buffers and boundaries. However, the spatial order of sterility intersects with the spatial order of other lines of activity. Insight into the normative structure of these co-existing spatial orders turns out to be crucial for patient safety. By analyzing processes of spatial fine-tuning in everyday practice, it becomes possible to identify spatial competences and circumstances that enable staff members to provide safe health care. As such, a topical analysis offers an alternative perspective of patient safety, one that takes into account its spatial dimension.

Accident analysis and control options in support of the sludge water system safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

HEY, B.E.

A hazards analysis was initiated for the SWS in July 2001 (SNF-8626, K Basin Sludge and Water System Preliminary Hazard Analysis) and updated in December 2001 (SNF-10020 Rev. 0, Hazard Evaluation for KE Sludge and Water System - Project A16) based on conceptual design information for the Sludge Retrieval System (SRS) and 60% design information for the cask and container. SNF-10020 was again revised in September 2002 to incorporate new hazards identified from final design information and from a What-if/Checklist evaluation of operational steps. The process hazards, controls, and qualitative consequence and frequency estimates taken from these efforts have beenmore » incorporated into Revision 5 of HNF-3960, K Basins Hazards Analysis. The hazards identification process documented in the above referenced reports utilized standard industrial safety techniques (AIChE 1992, Guidelines for Hazard Evaluation Procedures) to systematically guide several interdisciplinary teams through the system using a pre-established set of process parameters (e.g., flow, temperature, pressure) and guide words (e.g., high, low, more, less). The teams generally included representation from the U.S. Department of Energy (DOE), K Basins Nuclear Safety, T Plant Nuclear Safety, K Basin Industrial Safety, fire protection, project engineering, operations, and facility engineering.« less

An analysis of electronic health record-related patient safety concerns

PubMed Central

Meeks, Derek W; Smith, Michael W; Taylor, Lesley; Sittig, Dean F; Scott, Jean M; Singh, Hardeep

2014-01-01

Objective A recent Institute of Medicine report called for attention to safety issues related to electronic health records (EHRs). We analyzed EHR-related safety concerns reported within a large, integrated healthcare system. Methods The Informatics Patient Safety Office of the Veterans Health Administration (VA) maintains a non-punitive, voluntary reporting system to collect and investigate EHR-related safety concerns (ie, adverse events, potential events, and near misses). We analyzed completed investigations using an eight-dimension sociotechnical conceptual model that accounted for both technical and non-technical dimensions of safety. Using the framework analysis approach to qualitative data, we identified emergent and recurring safety concerns common to multiple reports. Results We extracted 100 consecutive, unique, closed investigations between August 2009 and May 2013 from 344 reported incidents. Seventy-four involved unsafe technology and 25 involved unsafe use of technology. A majority (70%) involved two or more model dimensions. Most often, non-technical dimensions such as workflow, policies, and personnel interacted in a complex fashion with technical dimensions such as software/hardware, content, and user interface to produce safety concerns. Most (94%) safety concerns related to either unmet data-display needs in the EHR (ie, displayed information available to the end user failed to reduce uncertainty or led to increased potential for patient harm), software upgrades or modifications, data transmission between components of the EHR, or ‘hidden dependencies’ within the EHR. Discussion EHR-related safety concerns involving both unsafe technology and unsafe use of technology persist long after ‘go-live’ and despite the sophisticated EHR infrastructure represented in our data source. Currently, few healthcare institutions have reporting and analysis capabilities similar to the VA. Conclusions Because EHR-related safety concerns have complex

21 CFR 172.833 - Sucrose acetate isobutyrate (SAIB).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Section 172.833 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES..., Addendum 4, Food and Agriculture Organization of the United Nations (FAO), Food and Nutrition Paper 5... Food Safety and Applied Nutrition, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

Addendum: New approach to the resummation of logarithms in Higgs-boson decays to a vector quarkonium plus a photon [Phys. Rev. D 95, 054018 (2017)

DOE PAGES

Bodwin, Geoffrey T.; Chung, Hee Sok; Ee, June-Haak; ...

2017-12-20

In this addendum to Phys. Rev. D 95, 054018 (2017) we recompute the rates for the decays of the Higgs boson to a vector quarkonium plus a photon, where the vector quarkonium is J/psi, Upsilon(1S) Upsilon(2S). We correct an error in the Abel-Pad'e summation formula that was used to carry out the evolution of the quarkonium light-cone distribution amplitude in Phys. Rev. D 95, 054018 (2017). We also correct an error in the scale of quarkonium wave function at the origin in Phys. Rev. D 95, 054018 (2017) and introduce several additional refinements in the calculation.

Addendum: New approach to the resummation of logarithms in Higgs-boson decays to a vector quarkonium plus a photon [Phys. Rev. D 95, 054018 (2017)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bodwin, Geoffrey T.; Chung, Hee Sok; Ee, June-Haak

In this addendum to Phys. Rev. D 95, 054018 (2017) we recompute the rates for the decays of the Higgs boson to a vector quarkonium plus a photon, where the vector quarkonium is J/psi, Upsilon(1S) Upsilon(2S). We correct an error in the Abel-Pad'e summation formula that was used to carry out the evolution of the quarkonium light-cone distribution amplitude in Phys. Rev. D 95, 054018 (2017). We also correct an error in the scale of quarkonium wave function at the origin in Phys. Rev. D 95, 054018 (2017) and introduce several additional refinements in the calculation.

Addendum to the Closure Report for Corrective Action Unit 404: Roller Coaster Lagoons and Trench, Tonopah Test Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the September 1998, Closure Report for Corrective Action Unit 404: Roller Coaster Lagoons and Trench, Tonopah Test Range, Nevada as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, thismore » addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the cancellation of the URs for: • CAS TA-03-001-TARC Roller Coaster Lagoons • CAS TA-21-001-TARC Roller Coaster N. Disposal Trench These URs were established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and were based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since these URs were established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, these URs were re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the URs) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA

Hazard Identification and Risk Assessment of Health and Safety Approach JSA (Job Safety Analysis) in Plantation Company

NASA Astrophysics Data System (ADS)

Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi

2017-06-01

Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.

Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

Integrated Safety Analysis Teams

NASA Technical Reports Server (NTRS)

Wetherholt, Jonathan C.

2008-01-01

Today's complex systems require understanding beyond one person s capability to comprehend. Each system requires a team to divide the system into understandable subsystems which can then be analyzed with an Integrated Hazard Analysis. The team must have both specific experiences and diversity of experience. Safety experience and system understanding are not always manifested in one individual. Group dynamics make the difference between success and failure as well as the difference between a difficult task and a rewarding experience. There are examples in the news which demonstrate the need to connect the pieces of a system into a complete picture. The Columbia disaster is now a standard example of a low consequence hazard in one part of the system; the External Tank is a catastrophic hazard cause for a companion subsystem, the Space Shuttle Orbiter. The interaction between the hardware, the manufacturing process, the handling, and the operations contributed to the problem. Each of these had analysis performed, but who constituted the team which integrated this analysis together? This paper will explore some of the methods used for dividing up a complex system; and how one integration team has analyzed the parts. How this analysis has been documented in one particular launch space vehicle case will also be discussed.

Safety analysis, risk assessment, and risk acceptance criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jamali, K.; Stack, D.W.; Sullivan, L.H.

1997-08-01

This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities andmore » that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, `ensuring` plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is `safe.` Use of RACs requires quantitative estimates of consequence frequency and magnitude.« less

41 CFR 102-80.130 - Who must perform the equivalent level of safety analysis?

Code of Federal Regulations, 2010 CFR

2010-07-01

...-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety Analysis... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Who must perform the equivalent level of safety analysis? 102-80.130 Section 102-80.130 Public Contracts and Property Management...

Development of guidance for states transitioning to new safety analysis tools

NASA Astrophysics Data System (ADS)

Alluri, Priyanka

With about 125 people dying on US roads each day, the US Department of Transportation heightened the awareness of critical safety issues with the passage of SAFETEA-LU (Safe Accountable Flexible Efficient Transportation Equity Act---a Legacy for Users) legislation in 2005. The legislation required each of the states to develop a Strategic Highway Safety Plan (SHSP) and incorporate data-driven approaches to prioritize and evaluate program outcomes: Failure to do so resulted in funding sanctioning. In conjunction with the legislation, research efforts have also been progressing toward the development of new safety analysis tools such as IHSDM (Interactive Highway Safety Design Model), SafetyAnalyst, and HSM (Highway Safety Manual). These software and analysis tools are comparatively more advanced in statistical theory and level of accuracy, and have a tendency to be more data intensive. A review of the 2009 five-percent reports and excerpts from the nationwide survey revealed astonishing facts about the continuing use of traditional methods including crash frequencies and rates for site selection and prioritization. The intense data requirements and statistical complexity of advanced safety tools are considered as a hindrance to their adoption. In this context, this research aims at identifying the data requirements and data availability for SafetyAnalyst and HSM by working with both the tools. This research sets the stage for working with the Empirical Bayes approach by highlighting some of the biases and issues associated with the traditional methods of selecting projects such as greater emphasis on traffic volume and regression-to-mean phenomena. Further, the not-so-obvious issue with shorter segment lengths, which effect the results independent of the methods used, is also discussed. The more reliable and statistically acceptable Empirical Bayes methodology requires safety performance functions (SPFs), regression equations predicting the relation between crashes

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

Analysis of microgravity space experiments Space Shuttle programmatic safety requirements

NASA Technical Reports Server (NTRS)

Terlep, Judith A.

1996-01-01

This report documents the results of an analysis of microgravity space experiments space shuttle programmatic safety requirements and recommends the creation of a Safety Compliance Data Package (SCDP) Template for both flight and ground processes. These templates detail the programmatic requirements necessary to produce a complete SCDP. The templates were developed from various NASA centers' requirement documents, previously written guidelines on safety data packages, and from personal experiences. The templates are included in the back as part of this report.

Safety analysis report for the Waste Storage Facility. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bengston, S.J.

1994-05-01

This safety analysis report outlines the safety concerns associated with the Waste Storage Facility located in the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. The three main objectives of the report are: define and document a safety basis for the Waste Storage Facility activities; demonstrate how the activities will be carried out to adequately protect the workers, public, and environment; and provide a basis for review and acceptance of the identified risk that the managers, operators, and owners will assume.

Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

NASA Astrophysics Data System (ADS)

Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

2018-01-01

The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

Transit safety & security statistics & analysis 2003 annual report (formerly SAMIS)

DOT National Transportation Integrated Search

2005-12-01

The Transit Safety & Security Statistics & Analysis 2003 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

Transit safety & security statistics & analysis 2002 annual report (formerly SAMIS)

DOT National Transportation Integrated Search

2004-12-01

The Transit Safety & Security Statistics & Analysis 2002 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

30 CFR 285.628 - How will MMS process my COP?

Code of Federal Regulations, 2010 CFR

2010-07-01

... allow this to occur. (g) If MMS approves your project easement, MMS will issue an addendum to your lease specifying the terms of the project easement. A project easement may include off-lease areas that: (1... feet (61 meters) in width, unless safety and environmental factors during construction and maintenance...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2013-01-01 2013-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2012-01-01 2012-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2014-01-01 2014-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2011-01-01 2011-01-01 false Contents of applications; technical information in final...

Efficacy and safety profile of xanthines in COPD: a network meta-analysis.

PubMed

Cazzola, Mario; Calzetta, Luigino; Barnes, Peter J; Criner, Gerard J; Martinez, Fernando J; Papi, Alberto; Gabriella Matera, Maria

2018-06-30

Theophylline can still have a role in the management of stable chronic obstructive pulmonary disease (COPD), but its use remains controversial, mainly due to its narrow therapeutic window. Doxofylline, another xanthine, is an effective bronchodilator and displays a better safety profile than theophylline. Therefore, we performed a quantitative synthesis to compare the efficacy and safety profile of different xanthines in COPD.The primary end-point of this meta-analysis was the impact of xanthines on lung function. In addition, we assessed the risk of adverse events by normalising data on safety as a function of person-weeks. Data obtained from 998 COPD patients were selected from 14 studies and meta-analysed using a network approach.The combined surface under the cumulative ranking curve (SUCRA) analysis of efficacy (change from baseline in forced expiratory volume in 1 s) and safety (risk of adverse events) showed that doxofylline was superior to aminophylline (comparable efficacy and significantly better safety), bamiphylline (significantly better efficacy and comparable safety), and theophylline (comparable efficacy and significantly better safety).Considering the overall efficacy/safety profile of the investigated agents, the results of this quantitative synthesis suggest that doxofylline seems to be the best xanthine for the treatment of COPD. Copyright ©ERS 2018.

Safety analysis of interchanges

DOT National Transportation Integrated Search

2007-06-01

The objectives of this research are to synthesize the current state of knowledge concerning the safety assessment of new or modified interchanges; develop a spreadsheet-based computational tool for performing safety assessments of interchanges; and i...

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

Safety analysis report for packaging (onsite) multicanister overpack cask

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, W.S.

1997-07-14

This safety analysis report for packaging (SARP) documents the safety of shipments of irradiated fuel elements in the MUlticanister Overpack (MCO) and MCO Cask for a highway route controlled quantity, Type B fissile package. This SARP evaluates the package during transfers of (1) water-filled MCOs from the K Basins to the Cold Vacuum Drying Facility (CVDF) and (2) sealed and cold vacuum dried MCOs from the CVDF in the 100 K Area to the Canister Storage Building in the 200 East Area.

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

Mines Systems Safety Improvement Using an Integrated Event Tree and Fault Tree Analysis

NASA Astrophysics Data System (ADS)

Kumar, Ranjan; Ghosh, Achyuta Krishna

2017-04-01

Mines systems such as ventilation system, strata support system, flame proof safety equipment, are exposed to dynamic operational conditions such as stress, humidity, dust, temperature, etc., and safety improvement of such systems can be done preferably during planning and design stage. However, the existing safety analysis methods do not handle the accident initiation and progression of mine systems explicitly. To bridge this gap, this paper presents an integrated Event Tree (ET) and Fault Tree (FT) approach for safety analysis and improvement of mine systems design. This approach includes ET and FT modeling coupled with redundancy allocation technique. In this method, a concept of top hazard probability is introduced for identifying system failure probability and redundancy is allocated to the system either at component or system level. A case study on mine methane explosion safety with two initiating events is performed. The results demonstrate that the presented method can reveal the accident scenarios and improve the safety of complex mine systems simultaneously.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the second volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of failure modes and effects analysis; accident analysis; operational safety requirements; quality assurance program; ES&H management program; environmental, safety, and health systems critical to safety; summary of waste-management program; environmental monitoring program; facility expansion, decontamination, and decommissioning; summary of emergency response plan; summary plan for employee training; summary plan for operating procedures; glossary; and appendices A and B.« less

Evolution of Safety Analysis to Support New Exploration Missions

NASA Technical Reports Server (NTRS)

Thrasher, Chard W.

2008-01-01

NASA is currently developing the Ares I launch vehicle as a key component of the Constellation program which will provide safe and reliable transportation to the International Space Station, back to the moon, and later to Mars. The risks and costs of the Ares I must be significantly lowered, as compared to other manned launch vehicles, to enable the continuation of space exploration. It is essential that safety be significantly improved, and cost-effectively incorporated into the design process. This paper justifies early and effective safety analysis of complex space systems. Interactions and dependences between design, logistics, modeling, reliability, and safety engineers will be discussed to illustrate methods to lower cost, reduce design cycles and lessen the likelihood of catastrophic events.

Addendum to the Closure Report for Corrective Action Unit 271: Areas 25, 26, and 27 Septic Systems Nevada Test Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the August 2004, Closure Report for Corrective Action Unit 271, Areas 25, 26, and 27 Septic Systems as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, this addendum consistsmore » of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the modification of the UR for CAS 27-05-02, Leachfield. This UR was established as part of a Federal Facility Agreement and Consent Order (FFACO) corrective action and is based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This re-evaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to modify the UR to an administrative UR. Administrative URs differ

Automation for System Safety Analysis

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Fleming, Land; Throop, David; Thronesbery, Carroll; Flores, Joshua; Bennett, Ted; Wennberg, Paul

2009-01-01

This presentation describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

10 CFR 72.70 - Safety analysis report updating.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.70 Section 72.70 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Records...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

Analysis of factors influencing safety management for metro construction in China.

PubMed

Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

2014-07-01

With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Initial empirical analysis of nuclear power plant organization and its effect on safety performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, J.; McLaughlin, S.D.; Osborn, R.N.

This report contains an analysis of the relationship between selected aspects of organizational structure and the safety-related performance of nuclear power plants. The report starts by identifying and operationalizing certain key dimensions of organizational structure that may be expected to be related to plant safety performance. Next, indicators of plant safety performance are created by combining existing performance measures into more reliable indicators. Finally, the indicators of plant safety performance using correlational and discriminant analysis. The overall results show that plants with better developed coordination mechanisms, shorter vertical hierarchies, and a greater number of departments tend to perform more safely.

Data collection and analysis for local roadway safety assessment.

DOT National Transportation Integrated Search

2014-11-01

The project Data Analysis for Local Roadway : Assessment conducted systematic road-safety : assessment and identified major risks that can be el : iminated or reduced by pr : actical road-improvement : measures. Specifically, the primary task o...

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

Analysis respons to the implementation of nuclear installations safety culture using AHP-TOPSIS

NASA Astrophysics Data System (ADS)

Situmorang, J.; Kuntoro, I.; Santoso, S.; Subekti, M.; Sunaryo, G. R.

2018-02-01

An analysis of responses to the implementation of nuclear installations safety culture has been done using AHP (Analitic Hierarchy Process) - TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution). Safety culture is considered as collective commitments of the decision-making level, management level, and individual level. Thus each level will provide a subjective perspective as an alternative approach to implementation. Furthermore safety culture is considered by the statement of five characteristics which in more detail form consist of 37 attributes, and therefore can be expressed as multi-attribute state. Those characteristics and or attributes will be a criterion and its value is difficult to determine. Those criteria of course, will determine and strongly influence the implementation of the corresponding safety culture. To determine the pattern and magnitude of the influence is done by using a TOPSIS that is based on decision matrix approach and is composed of alternatives and criteria. The weight of each criterion is determined by AHP technique. The data used are data collected through questionnaires at the workshop on safety and health in 2015. .Reliability test of data gives Cronbah Alpha value of 95.5% which according to the criteria is stated reliable. Validity test using bivariate correlation analysis technique between each attribute give Pearson correlation for all attribute is significant at level 0,01. Using confirmatory factor analysis gives Kaise-Meyer-Olkin of sampling Adequacy (KMO) is 0.719 and it is greater than the acceptance criterion 0.5 as well as the 0.000 significance level much smaller than 0.05 and stated that further analysis could be performed. As a result of the analysis it is found that responses from the level of decision maker (second echelon) dominate the best order preference rank to be the best solution in strengthening the nuclear installation safety culture, except for the first characteristics, safety is a

Addendum to the Closure Report for Corrective Action Unit 404: Roller Coaster Sewage Lagoons and North Disposal Trench, Tonopah Test Range, Nevada, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn Kidman

This document constitutes an addendum to the September 1998, Closure Report for Corrective Action Unit 404: Roller Coaster Lagoons and Trench, Tonopah Test Range, Nevada as described in the document Recommendations and Justifications for Modifications for Use Restrictions Established under the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office Federal Facility Agreement and Consent Order (UR Modification document) dated February 2008. The UR Modification document was approved by NDEP on February 26, 2008. The approval of the UR Modification document constituted approval of each of the recommended UR modifications. In conformance with the UR Modification document, thismore » addendum consists of: • This cover page that refers the reader to the UR Modification document for additional information • The cover and signature pages of the UR Modification document • The NDEP approval letter • The corresponding section of the UR Modification document This addendum provides the documentation justifying the modification of the UR for CAS TA-03-001-TARC Roller Coaster Lagoons. This UR was established as part of Federal Facility Agreement and Consent Order (FFACO) corrective actions and was based on the presence of contaminants at concentrations greater than the action levels established at the time of the initial investigation (FFACO, 1996; as amended August 2006). Since this UR was established, practices and procedures relating to the implementation of risk-based corrective actions (RBCA) have changed. Therefore, this UR was re-evaluated against the current RBCA criteria as defined in the Industrial Sites Project Establishment of Final Action Levels (NNSA/NSO, 2006c). This reevaluation consisted of comparing the original data (used to define the need for the UR) to risk-based final action levels (FALs) developed using the current Industrial Sites RBCA process. The re-evaluation resulted in a recommendation to modify the UR for CAS

Assessing the safety effects of cooperative intelligent transport systems: A bowtie analysis approach.

PubMed

Ehlers, Ute Christine; Ryeng, Eirin Olaussen; McCormack, Edward; Khan, Faisal; Ehlers, Sören

2017-02-01

The safety effects of cooperative intelligent transport systems (C-ITS) are mostly unknown and associated with uncertainties, because these systems represent emerging technology. This study proposes a bowtie analysis as a conceptual framework for evaluating the safety effect of cooperative intelligent transport systems. These seek to prevent road traffic accidents or mitigate their consequences. Under the assumption of the potential occurrence of a particular single vehicle accident, three case studies demonstrate the application of the bowtie analysis approach in road traffic safety. The approach utilizes exemplary expert estimates and knowledge from literature on the probability of the occurrence of accident risk factors and of the success of safety measures. Fuzzy set theory is applied to handle uncertainty in expert knowledge. Based on this approach, a useful tool is developed to estimate the effects of safety-related cooperative intelligent transport systems in terms of the expected change in accident occurrence and consequence probability. Copyright © 2016 Elsevier Ltd. All rights reserved.

ANSI/ASHRAE/IES Standard 90.1-2013 Determination of Energy Savings: Qualitative Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halverson, Mark A.; Rosenberg, Michael I.; Hart, Philip R.

2014-09-04

This report provides a final qualitative analysis of all addenda to ANSI/ASHRAE/IES Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition). All addenda in creating Standard 90.1-2013 were evaluated for their projected impact on energy efficiency. Each addendum was characterized as having a positive, neutral, or negative impact on overall building energy efficiency.

Validation of the French version of the Pittsburgh Sleep Quality Index Addendum for posttraumatic stress disorder

PubMed Central

Ait-Aoudia, Malik; Levy, Pierre P.; Bui, Eric; Insana, Salvatore; de Fouchier, Capucine; Germain, Anne; Jehel, Louis

2013-01-01

Background Sleep disturbances are one of the main complaints of patients with trauma-related disorders. The original Pittsburgh Sleep Quality Index Addendum for PTSD (PSQI-A) is self-report instrument developed to evaluate posttraumatic stress disorder (PTSD)-specific sleep disturbances in trauma-exposed individuals. However, to date, the PSQI-A has not yet been translated nor validated in French. Objective The present study aims to: a) translate the PSQI-A into French, and b) examine its psychometric properties. Method Seventy-three adult patients (mean age=40.3 [SD=15.0], 75% females) evaluated in a specialized psychotraumatology unit completed the French versions of the PSQI-A, Pittsburgh Sleep Quality Index (PSQI), Hospital Anxiety and Depression Scale (HADS), and Impact Event Scale-Revised (IES-R). Results The French version of the PSQI-A showed satisfactory internal consistency, inter-item correlations, item correlations with the total score, convergent validity with PTSD and anxiety measures, and divergent validity with a depression measure. Conclusion Our findings support the use of the French version of the PSQI-A for both clinical care and research. The French version of the PSQI-A is an important addition to the currently available instruments that can be used to examine trauma-related sleep disturbances among French-speaking individuals. PMID:24044071

An integrated safety analysis of intravenous ibuprofen (Caldolor®) in adults

PubMed Central

Southworth, Stephen R; Woodward, Emily J; Peng, Alex; Rock, Amy D

2015-01-01

Intravenous (IV) nonsteroidal anti-inflammatory drugs such as IV ibuprofen are increasingly used as a component of multimodal pain management in the inpatient and outpatient settings. The safety of IV ibuprofen as assessed in ten sponsored clinical studies is presented in this analysis. Overall, 1,752 adult patients have been included in safety and efficacy trials over 11 years; 1,220 of these patients have received IV ibuprofen and 532 received either placebo or comparator medication. The incidence of adverse events (AEs), serious AEs, and changes in vital signs and clinically significant laboratory parameters have been summarized and compared to patients receiving placebo or active comparator drug. Overall, IV ibuprofen has been well tolerated by hospitalized and outpatient patients when administered both prior to surgery and postoperatively as well as for nonsurgical pain or fever. The overall incidence of AEs is lower in patients receiving IV ibuprofen as compared to those receiving placebo in this integrated analysis. Specific analysis of hematological and renal effects showed no increased risk for patients receiving IV ibuprofen. A subset analysis of elderly patients suggests that no dose adjustment is needed in this higher risk population. This integrated safety analysis demonstrates that IV ibuprofen can be safely administered prior to surgery and continued in the postoperative period as a component of multimodal pain management. PMID:26604816

Safety analysis, 200 Area, Savannah River Plant: Separations area operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, W.C.; Lee, R.; Allen, P.M.

1991-07-01

The nev HB-Line, located on the fifth and sixth levels of Building 221-H, is designed to replace the aging existing HB-Line production facility. The nev HB-Line consists of three separate facilities: the Scrap Recovery Facility, the Neptunium Oxide Facility, and the Plutonium Oxide Facility. There are three separate safety analyses for the nev HB-Line, one for each of the three facilities. These are issued as supplements to the 200-Area Safety Analysis (DPSTSA-200-10). These supplements are numbered as Sup 2A, Scrap Recovery Facility, Sup 2B, Neptunium Oxide Facility, Sup 2C, Plutonium Oxide Facility. The subject of this safety analysis, the, Plutoniummore » Oxide Facility, will convert nitrate solutions of {sup 238}Pu to plutonium oxide (PuO{sub 2}) powder. All these new facilities incorporate improvements in: (1) engineered barriers to contain contamination, (2) barriers to minimize personnel exposure to airborne contamination, (3) shielding and remote operations to decrease radiation exposure, and (4) equipment and ventilation design to provide flexibility and improved process performance.« less

Development of the FHR advanced natural circulation analysis code and application to FHR safety analysis

DOE PAGES

Guo, Z.; Zweibaum, N.; Shao, M.; ...

2016-04-19

The University of California, Berkeley (UCB) is performing thermal hydraulics safety analysis to develop the technical basis for design and licensing of fluoride-salt-cooled, high-temperature reactors (FHRs). FHR designs investigated by UCB use natural circulation for emergency, passive decay heat removal when normal decay heat removal systems fail. The FHR advanced natural circulation analysis (FANCY) code has been developed for assessment of passive decay heat removal capability and safety analysis of these innovative system designs. The FANCY code uses a one-dimensional, semi-implicit scheme to solve for pressure-linked mass, momentum and energy conservation equations. Graph theory is used to automatically generate amore » staggered mesh for complicated pipe network systems. Heat structure models have been implemented for three types of boundary conditions (Dirichlet, Neumann and Robin boundary conditions). Heat structures can be composed of several layers of different materials, and are used for simulation of heat structure temperature distribution and heat transfer rate. Control models are used to simulate sequences of events or trips of safety systems. A proportional-integral controller is also used to automatically make thermal hydraulic systems reach desired steady state conditions. A point kinetics model is used to model reactor kinetics behavior with temperature reactivity feedback. The underlying large sparse linear systems in these models are efficiently solved by using direct and iterative solvers provided by the SuperLU code on high performance machines. Input interfaces are designed to increase the flexibility of simulation for complicated thermal hydraulic systems. In conclusion, this paper mainly focuses on the methodology used to develop the FANCY code, and safety analysis of the Mark 1 pebble-bed FHR under development at UCB is performed.« less

Safety analysts training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolton, P.

The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

Sources of Safety Data and Statistical Strategies for Design and Analysis: Postmarket Surveillance.

PubMed

Izem, Rima; Sanchez-Kam, Matilde; Ma, Haijun; Zink, Richard; Zhao, Yueqin

2018-03-01

Safety data are continuously evaluated throughout the life cycle of a medical product to accurately assess and characterize the risks associated with the product. The knowledge about a medical product's safety profile continually evolves as safety data accumulate. This paper discusses data sources and analysis considerations for safety signal detection after a medical product is approved for marketing. This manuscript is the second in a series of papers from the American Statistical Association Biopharmaceutical Section Safety Working Group. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from passive postmarketing surveillance systems compared to other sources. Signal detection has traditionally relied on spontaneous reporting databases that have been available worldwide for decades. However, current regulatory guidelines and ease of reporting have increased the size of these databases exponentially over the last few years. With such large databases, data-mining tools using disproportionality analysis and helpful graphics are often used to detect potential signals. Although the data sources have many limitations, analyses of these data have been successful at identifying safety signals postmarketing. Experience analyzing these dynamic data is useful in understanding the potential and limitations of analyses with new data sources such as social media, claims, or electronic medical records data.

Crime, perceived safety, and physical activity: A meta-analysis.

PubMed

Rees-Punia, Erika; Hathaway, Elizabeth D; Gay, Jennifer L

2018-06-01

Perceived safety from crime and objectively-measured crime rates may be associated with physical inactivity. The purpose of this meta-analysis is to estimate the odds of accumulating high levels of physical activity (PA) when the perception of safety from crime is high and when objectively-measured crime is high. Peer-reviewed studies were identified through PubMed, Web of Science, ProQuest Criminal Justice, and ScienceDirect from earliest record through 2016. Included studies measured total PA, leisure-time PA, or walking in addition to perceived safety from crime or objective measures of crime. Mean odds ratios were aggregated with random effects models, and meta-regression was used to examine effects of potential moderators: country, age, and crime/PA measure. Sixteen cross-sectional studies yielded sixteen effects for perceived safety from crime and four effects for objective crime. Those reporting feeling safe from crime had a 27% greater odds of achieving higher levels of physical activity (OR=1.27 [1.08, 1.49]), and those living in areas with higher objectively-measured crime had a 28% reduced odds of achieving higher levels of physical activity (OR=0.72 [0.61, 0.83]). Effects of perceived safety were highly heterogeneous (I 2 =94.09%), but explored moderators were not statistically significant, likely because of the small sample size. Despite the limited number of effects suitable for aggregation, the mean association between perceived safety and PA was significant. As it seems likely that perceived lack of safety from crime constrains PA behaviors, future research exploring moderators of this association may help guide public health recommendations and interventions. Copyright © 2017 Elsevier Inc. All rights reserved.

Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials.

PubMed

Guttman, Nurit

2015-11-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

76 FR 31507 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission... rule announced the availability of a draft regulatory analysis for public comment. This document... in Section XI, ``Regulatory Analysis.'' The correct ADAMS accession number is ML102380243. DATES: The...

Macro-level safety analysis of pedestrian crashes in Shanghai, China.

PubMed

Wang, Xuesong; Yang, Junguang; Lee, Chris; Ji, Zhuoran; You, Shikai

2016-11-01

Pedestrian safety has become one of the most important issues in the field of traffic safety. This study aims at investigating the association between pedestrian crash frequency and various predictor variables including roadway, socio-economic, and land-use features. The relationships were modeled using the data from 263 Traffic Analysis Zones (TAZs) within the urban area of Shanghai - the largest city in China. Since spatial correlation exists among the zonal-level data, Bayesian Conditional Autoregressive (CAR) models with seven different spatial weight features (i.e. (a) 0-1 first order, adjacency-based, (b) common boundary-length-based, (c) geometric centroid-distance-based, (d) crash-weighted centroid-distance-based, (e) land use type, adjacency-based, (f) land use intensity, adjacency-based, and (g) geometric centroid-distance-order) were developed to characterize the spatial correlations among TAZs. Model results indicated that the geometric centroid-distance-order spatial weight feature, which was introduced in macro-level safety analysis for the first time, outperformed all the other spatial weight features. Population was used as the surrogate for pedestrian exposure, and had a positive effect on pedestrian crashes. Other significant factors included length of major arterials, length of minor arterials, road density, average intersection spacing, percentage of 3-legged intersections, and area of TAZ. Pedestrian crashes were higher in TAZs with medium land use intensity than in TAZs with low and high land use intensity. Thus, higher priority should be given to TAZs with medium land use intensity to improve pedestrian safety. Overall, these findings can help transportation planners and managers understand the characteristics of pedestrian crashes and improve pedestrian safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development and Psychometric Analysis of a Nurses' Attitudes and Skills Safety Scale: Initial Results.

PubMed

Armstrong, Gail E; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses' perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses' perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses' perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices.

75 FR 74022 - Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD [Recommendation 2010-1] Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers AGENCY: Defense Nuclear Facilities Safety Board... Nuclear Facilities Safety Board has made a recommendation to the Secretary of Energy requesting an...

Analysis of event data recorder data for vehicle safety improvement

DOT National Transportation Integrated Search

2008-04-01

The Volpe Center performed a comprehensive engineering analysis of Event Data Recorder (EDR) data supplied by the National Highway Traffic Safety Administration (NHTSA) to assess its accuracy and usefulness in crash reconstruction and improvement of ...

75 FR 69648 - Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD [Recommendation 2010-1] Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers AGENCY: Defense Nuclear Facilities Safety Board... Facilities Safety Board has made a recommendation to the Secretary of Energy requesting an amendment to the...

MODEL 9977 B(M)F-96 SAFETY ANALYSIS REPORT FOR PACKAGING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, G; Paul Blanton, P; Kurt Eberl, K

2006-05-18

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on and for the 9977 Shipping Package, referred to as the General Purpose Fissile Package (GPFP). The performance evaluation presented in this SARP documents the compliance of the 9977 package with the regulatory safety requirements for Type B packages. Per 10 CFR 71.59, for the 9977 packages evaluated in this SARP, the value of ''N'' is 50, and the Transport Index based on nuclear criticality control is 1.0. The 9977 package is designed with a high degree of single containment. The 9977 complies with 10 CFR 71more » (2002), Department of Energy (DOE) Order 460.1B, DOE Order 460.2, and 10 CFR 20 (2003) for As Low As Reasonably Achievable (ALARA) principles. The 9977 also satisfies the requirements of the Regulations for the Safe Transport of Radioactive Material--1996 Edition (Revised)--Requirements. IAEA Safety Standards, Safety Series No. TS-R-1 (ST-1, Rev.), International Atomic Energy Agency, Vienna, Austria (2000). The 9977 package is designed, analyzed and fabricated in accordance with Section III of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code, 1992 edition.« less

Development and Psychometric Analysis of a Nurses’ Attitudes and Skills Safety Scale: Initial Results

PubMed Central

Armstrong, Gail E.; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

2016-01-01

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses’ perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses’ perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses’ perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices. PMID:27479518

Associations between safety culture and employee engagement over time: a retrospective analysis.

PubMed

Daugherty Biddison, Elizabeth Lee; Paine, Lori; Murakami, Peter; Herzke, Carrie; Weaver, Sallie J

2016-01-01

With the growth of the patient safety movement and development of methods to measure workforce health and success have come multiple modes of assessing healthcare worker opinions and attitudes about work and the workplace. Safety culture, a group-level measure of patient safety-related norms and behaviours, has been proposed to influence a variety of patient safety outcomes. Employee engagement, conceptualised as a positive, work-related mindset including feelings of vigour, dedication and absorption in one's work, has also demonstrated an association with a number of important worker outcomes in healthcare. To date, the relationship between responses to these two commonly used measures has been poorly characterised. Our study used secondary data analysis to assess the relationship between safety culture and employee engagement over time in a sample of >50 inpatient hospital units in a large US academic health system. With >2000 respondents in each of three time periods assessed, we found moderate to strong positive correlations (r=0.43-0.69) between employee engagement and four Safety Attitudes Questionnaire domains. Independent collection of these two assessments may have limited our analysis in that minimally different inclusion criteria resulted in some differences in the total respondents to the two instruments. Our findings, nevertheless, suggest a key area in which healthcare quality improvement efforts might be streamlined. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Safety analysis report for the SR-101 inert reservoir package

DOT National Transportation Integrated Search

1998-11-01

Department of Energy (DOE) AL Weapons Surety Division (WSD) requires the SR-101 Inert Reservoir Package to : meet applicable hazardous material transportation requirements. This Safety Analysis Report (SAR) is based on : requirements in place at the ...

49 CFR 209.501 - Review of rail transportation safety and security route analysis.

Code of Federal Regulations, 2010 CFR

2010-10-01

... establish that the route chosen by the carrier poses the least overall safety and security risk, the... analysis, including a clear description of the risks on the selected route that have not been... commercially practicable alternative route poses fewer overall safety and security risks than the route...

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Safety Analysis § 102-80.105 What information must be included in an equivalent level of safety... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What information must be included in an equivalent level of safety analysis? 102-80.105 Section 102-80.105 Public Contracts and...

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Code of Federal Regulations, 2014 CFR

2014-01-01

... of Safety Analysis § 102-80.105 What information must be included in an equivalent level of safety... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What information must be included in an equivalent level of safety analysis? 102-80.105 Section 102-80.105 Public Contracts and...

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Code of Federal Regulations, 2013 CFR

2013-07-01

... of Safety Analysis § 102-80.105 What information must be included in an equivalent level of safety... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What information must be included in an equivalent level of safety analysis? 102-80.105 Section 102-80.105 Public Contracts and...

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Code of Federal Regulations, 2012 CFR

2012-01-01

... of Safety Analysis § 102-80.105 What information must be included in an equivalent level of safety... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What information must be included in an equivalent level of safety analysis? 102-80.105 Section 102-80.105 Public Contracts and...

Implementation of the Generic Safety Analysis Report - Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

1999-06-02

The Savannah River Site has completed the development, review and approval process for the Generic Safety Analysis Report (GSAR) and implemented this information in facility SARs and BIOs. This includes the yearly revision of the GSAR and the facility-specific SARs. The process has provided us with several lessons learned.

Analysis of Material Handling Safety in Construction Sites and Countermeasures for Effective Enhancement

PubMed Central

Anil Kumar, C. N.; Sakthivel, M.; Elangovan, R. K.; Arularasu, M.

2015-01-01

One of many hazardous workplaces includes the construction sites as they involve several dangerous tasks. Many studies have revealed that material handling equipment is a major cause of accidents at these sites. Though safety measures are being followed and monitored continuously, accident rates are still high as either workers are unaware of hazards or the safety regulations are not being strictly followed. This paper analyses the safety management systems at construction sites through means of questionnaire surveys with employees, specifically referring to safety of material handling equipment. Based on results of the questionnaire surveys, two construction sites were selected for a safety education program targeting worker safety related to material handling equipment. Knowledge levels of the workers were gathered before and after the program and results obtained were subjected to a t-test analysis to mark significance level of the conducted safety education program. PMID:26446572

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the System-Wide Safety and Assurance Technologies Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2015-01-01

The Aviation Safety Program (AvSP) System-Wide Safety and Assurance Technologies (SSAT) Project asked the AvSP Systems and Portfolio Analysis Team to identify SSAT-related trends. SSAT had four technical challenges: advance safety assurance to enable deployment of NextGen systems; automated discovery of precursors to aviation safety incidents; increasing safety of human-automation interaction by incorporating human performance, and prognostic algorithm design for safety assurance. This report reviews incident data from the NASA Aviation Safety Reporting System (ASRS) for system-component-failure- or-malfunction- (SCFM-) related and human-factor-related incidents for commercial or cargo air carriers (Part 121), commuter airlines (Part 135), and general aviation (Part 91). The data was analyzed by Federal Aviation Regulations (FAR) part, phase of flight, SCFM category, human factor category, and a variety of anomalies and results. There were 38 894 SCFM-related incidents and 83 478 human-factorrelated incidents analyzed between January 1993 and April 2011.

AADL Fault Modeling and Analysis Within an ARP4761 Safety Assessment

DTIC Science & Technology

2014-10-01

Analysis Generator 27 3.2.3 Mapping to OpenFTA Format File 27 3.2.4 Mapping to Generic XML Format 28 3.2.5 AADL and FTA Mapping Rules 28 3.2.6 Issues...PSSA), System Safety Assessment (SSA), Common Cause Analysis (CCA), Fault Tree Analysis ( FTA ), Failure Modes and Effects Analysis (FMEA), Failure...Modes and Effects Summary, Mar - kov Analysis (MA), and Dependence Diagrams (DDs), also referred to as Reliability Block Dia- grams (RBDs). The

Deaths following prehospital safety incidents: an analysis of a national database.

PubMed

Yardley, Iain E; Donaldson, Liam J

2016-10-01

Ensuring patient safety in the prehospital environment is difficult due to the unpredictable nature of the workload and the uncontrolled situations that care is provided in. Studying previous safety incidents can help understand risks and take action to mitigate them. We present an analysis of safety incidents related to patient deaths in ambulance services in England. All incidents related to a patient death reported to the National Reporting and Learning System from an ambulance service between 1 June 2010 and 31 October 2012 were subjected to thematic analysis to identify the failings that led to the incident. Sixty-nine incidents were analysed, equating to one safety incident-related death per 168 000 calls received. Just three event categories were identified: delayed response (59%, 41/69), shortfalls in clinical care (35%, 24/69) and injury during transit (6%, 4/69). Primary failures differed for the categories: problems with dispatch caused the majority of delays in response, with equipment problems and bad weather accounting for the remainder. Failure to provide necessary care was predominantly caused by clinical misjudgements by ambulance staff and equipment issues underlay incidents that led to a patient injury. Improvements intended to address safety related mortality in the ambulance service should include ensuring adequate equipping and resourcing of ambulance services, improving coordination and decision-making during dispatch and supporting individual staff members in the difficult decisions they are faced with. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Vortex Advisory System Safety Analysis : Volume III, Summary of Laser Data Collection and Analysis

DOT National Transportation Integrated Search

1979-08-01

A Laser-Doppler velocimeter (LDV) was used to monitor the wake vortices shed by 5300 landing aircraft at a point 10,000 feet from the runway threshold. The data were collected to verify the analysis in Volume I of the safety of decreasing interarriva...

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

PubMed

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

A meta-analysis of personality and workplace safety: addressing unanswered questions.

PubMed

Beus, Jeremy M; Dhanani, Lindsay Y; McCord, Mallory A

2015-03-01

[Correction Notice: An Erratum for this article was reported in Vol 100(2) of Journal of Applied Psychology (see record 2015-08139-001). Table 3 contained formatting errors. Minus signs used to indicate negative statistical estimates within the table were inadvertently changed to m-dashes. All versions of this article have been corrected.] The purpose of this meta-analysis was to address unanswered questions regarding the associations between personality and workplace safety by (a) clarifying the magnitude and meaning of these associations with both broad and facet-level personality traits, (b) delineating how personality is associated with workplace safety, and (c) testing the relative importance of personality in comparison to perceptions of the social context of safety (i.e., safety climate) in predicting safety-related behavior. Our results revealed that whereas agreeableness and conscientiousness were negatively associated with unsafe behaviors, extraversion and neuroticism were positively associated with them. Of these traits, agreeableness accounted for the largest proportion of explained variance in safety-related behavior and openness to experience was unrelated. At the facet level, sensation seeking, altruism, anger, and impulsiveness were all meaningfully associated with safety-related behavior, though sensation seeking was the only facet that demonstrated a stronger relationship than its parent trait (i.e., extraversion). In addition, meta-analytic path modeling supported the theoretical expectation that personality's associations with accidents are mediated by safety-related behavior. Finally, although safety climate perceptions accounted for the majority of explained variance in safety-related behavior, personality traits (i.e., agreeableness, conscientiousness, neuroticism) still accounted for a unique and substantive proportion of the explained variance. Taken together, these results substantiate the value of considering personality traits as key

Case-control analysis in highway safety: Accounting for sites with multiple crashes.

PubMed

Gross, Frank

2013-12-01

There is an increased interest in the use of epidemiological methods in highway safety analysis. The case-control and cohort methods are commonly used in the epidemiological field to identify risk factors and quantify the risk or odds of disease given certain characteristics and factors related to an individual. This same concept can be applied to highway safety where the entity of interest is a roadway segment or intersection (rather than a person) and the risk factors of interest are the operational and geometric characteristics of a given roadway. One criticism of the use of these methods in highway safety is that they have not accounted for the difference between sites with single and multiple crashes. In the medical field, a disease either occurs or it does not; multiple occurrences are generally not an issue. In the highway safety field, it is necessary to evaluate the safety of a given site while accounting for multiple crashes. Otherwise, the analysis may underestimate the safety effects of a given factor. This paper explores the use of the case-control method in highway safety and two variations to account for sites with multiple crashes. Specifically, the paper presents two alternative methods for defining cases in a case-control study and compares the results in a case study. The first alternative defines a separate case for each crash in a given study period, thereby increasing the weight of the associated roadway characteristics in the analysis. The second alternative defines entire crash categories as cases (sites with one crash, sites with two crashes, etc.) and analyzes each group separately in comparison to sites with no crashes. The results are also compared to a "typical" case-control application, where the cases are simply defined as any entity that experiences at least one crash and controls are those entities without a crash in a given period. In a "typical" case-control design, the attributes associated with single-crash segments are weighted

ESSAA: Embedded system safety analysis assistant

NASA Technical Reports Server (NTRS)

Wallace, Peter; Holzer, Joseph; Guarro, Sergio; Hyatt, Larry

1987-01-01

The Embedded System Safety Analysis Assistant (ESSAA) is a knowledge-based tool that can assist in identifying disaster scenarios. Imbedded software issues hazardous control commands to the surrounding hardware. ESSAA is intended to work from outputs to inputs, as a complement to simulation and verification methods. Rather than treating the software in isolation, it examines the context in which the software is to be deployed. Given a specified disasterous outcome, ESSAA works from a qualitative, abstract model of the complete system to infer sets of environmental conditions and/or failures that could cause a disasterous outcome. The scenarios can then be examined in depth for plausibility using existing techniques.

Station Blackout: A case study in the interaction of mechanistic and probabilistic safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli; Cristian Rabiti

2013-11-01

The ability to better characterize and quantify safety margins is important to improved decision making about nuclear power plant design, operation, and plant life extension. As research and development (R&D) in the light-water reactor (LWR) Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway R&D is to support plant decisions for risk-informed margin management with the aim tomore » improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario.« less

Efficacy and safety of biologic therapies for systemic lupus erythematosus treatment: systematic review and meta-analysis.

PubMed

Borba, Helena Hiemisch Lobo; Wiens, Astrid; de Souza, Thais Teles; Correr, Cassyano Januário; Pontarolo, Roberto

2014-04-01

The objectives of this study were to evaluate the efficacy, safety, and tolerability of biologic drugs compared with placebo for systemic lupus erythematosus (SLE) treatment. A systematic review evaluating the efficacy and safety of biologic therapies compared with placebo in adult SLE patients treatment was performed. Data from studies performed before September 2013 were collected from several databases (MEDLINE, Cochrane Library, SCIELO, Scopus, and International Pharmaceutical Abstracts). Study eligibility criteria included randomized, double-blind, placebo-controlled trials; regarding treatment with biologic agents in SLE adult patients; and published in English, German, Portuguese, and Spanish. Extracted data were statistically analyzed in a meta-analysis using the Review Manager (RevMan) 5.1 software. Efficacy outcomes included the SELENA-SLEDAI (Safety of Estrogens in Lupus Erythematosus National Assessment version of the SLE Disease Activity Index) score, the SRI (Systemic Lupus Erythematosus Responder Index), normalization of low C3 (<90 mg/dL), anti-double-stranded DNA positive to negative, and no new BILAG (British Isles Lupus Assessment Group index) 1A or 2B flares. Data on safety profile included adverse events, serious and severe adverse events, death, malignancy, infections, and infusion reactions. We also evaluated withdrawals from treatment due to lack of efficacy or adverse events. Thirteen randomized placebo-controlled trials met the criteria for data extraction for systematic review. A meta-analysis regarding the efficacy and safety of belimumab compared with placebo involving four of these trials was undertaken and the remainder contributed to a meta-analysis of the safety of biologic agents. In addition, two trials allowed the performance of a meta-analysis regarding the efficacy and safety of rituximab compared with placebo. Belimumab was more effective than placebo in most evaluated outcomes. No significant differences in the safety and

A fully Bayesian before-after analysis of permeable friction course (PFC) pavement wet weather safety.

PubMed

Buddhavarapu, Prasad; Smit, Andre F; Prozzi, Jorge A

2015-07-01

Permeable friction course (PFC), a porous hot-mix asphalt, is typically applied to improve wet weather safety on high-speed roadways in Texas. In order to warrant expensive PFC construction, a statistical evaluation of its safety benefits is essential. Generally, the literature on the effectiveness of porous mixes in reducing wet-weather crashes is limited and often inconclusive. In this study, the safety effectiveness of PFC was evaluated using a fully Bayesian before-after safety analysis. First, two groups of road segments overlaid with PFC and non-PFC material were identified across Texas; the non-PFC or reference road segments selected were similar to their PFC counterparts in terms of site specific features. Second, a negative binomial data generating process was assumed to model the underlying distribution of crash counts of PFC and reference road segments to perform Bayesian inference on the safety effectiveness. A data-augmentation based computationally efficient algorithm was employed for a fully Bayesian estimation. The statistical analysis shows that PFC is not effective in reducing wet weather crashes. It should be noted that the findings of this study are in agreement with the existing literature, although these studies were not based on a fully Bayesian statistical analysis. Our study suggests that the safety effectiveness of PFC road surfaces, or any other safety infrastructure, largely relies on its interrelationship with the road user. The results suggest that the safety infrastructure must be properly used to reap the benefits of the substantial investments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Scenario Analysis for the Safety Assessment of Nuclear Waste Repositories: A Critical Review.

PubMed

Tosoni, Edoardo; Salo, Ahti; Zio, Enrico

2018-04-01

A major challenge in scenario analysis for the safety assessment of nuclear waste repositories pertains to the comprehensiveness of the set of scenarios selected for assessing the safety of the repository. Motivated by this challenge, we discuss the aspects of scenario analysis relevant to comprehensiveness. Specifically, we note that (1) it is necessary to make it clear why scenarios usually focus on a restricted set of features, events, and processes; (2) there is not yet consensus on the interpretation of comprehensiveness for guiding the generation of scenarios; and (3) there is a need for sound approaches to the treatment of epistemic uncertainties. © 2017 Society for Risk Analysis.

Ares I-X Malfunction Turn Range Safety Analysis

NASA Technical Reports Server (NTRS)

Beaty, J. R.

2011-01-01

Ares I-X was the designation given to the flight test version of the Ares I rocket which was developed by NASA (also known as the Crew Launch Vehicle (CLV) component of the Constellation Program). The Ares I-X flight test vehicle achieved a successful flight test on October 28, 2009, from Pad LC-39B at Kennedy Space Center, Florida (KSC). As part of the flight plan approval for the test vehicle, a range safety malfunction turn analysis was performed to support the risk assessment and vehicle destruct criteria development processes. Several vehicle failure scenarios were identified which could have caused the vehicle trajectory to deviate from its normal flight path. The effects of these failures were evaluated with an Ares I-X 6 degrees-of-freedom (6-DOF) digital simulation, using the Program to Optimize Simulated Trajectories Version II (POST2) simulation tool. The Ares I-X simulation analysis provided output files containing vehicle trajectory state information. These were used by other risk assessment and vehicle debris trajectory simulation tools to determine the risk to personnel and facilities in the vicinity of the launch area at KSC, and to develop the vehicle destruct criteria used by the flight test range safety officer in the event of a flight test anomaly of the vehicle. The simulation analysis approach used for this study is described, including descriptions of the failure modes which were considered and the underlying assumptions and ground rules of the study.

Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

DOE PAGES

Di Maio, Francesco; Zio, Enrico; Smith, Curtis; ...

2015-07-06

The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

PubMed Central

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Reprint of "Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials".

PubMed

Guttman, Nurit

2016-12-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Multimorbidity and Patient Safety Incidents in Primary Care: A Systematic Review and Meta-Analysis

PubMed Central

Panagioti, Maria; Stokes, Jonathan; Esmail, Aneez; Coventry, Peter; Cheraghi-Sohi, Sudeh; Alam, Rahul; Bower, Peter

2015-01-01

Background Multimorbidity is increasingly prevalent and represents a major challenge in primary care. Patients with multimorbidity are potentially more likely to experience safety incidents due to the complexity of their needs and frequency of their interactions with health services. However, rigorous syntheses of the link between patient safety incidents and multimorbidity are not available. This review examined the relationship between multimorbidity and patient safety incidents in primary care. Methods We followed our published protocol (PROSPERO registration number: CRD42014007434). Medline, Embase and CINAHL were searched up to May 2015. Study design and quality were assessed. Odds ratios (OR) and 95% confidence intervals (95% CIs) were calculated for the associations between multimorbidity and two categories of patient safety outcomes: ‘active patient safety incidents’ (such as adverse drug events and medical complications) and ‘precursors of safety incidents’ (such as prescription errors, medication non-adherence, poor quality of care and diagnostic errors). Meta-analyses using random effects models were undertaken. Results Eighty six relevant comparisons from 75 studies were included in the analysis. Meta-analysis demonstrated that physical-mental multimorbidity was associated with an increased risk for ‘active patient safety incidents’ (OR = 2.39, 95% CI = 1.40 to 3.38) and ‘precursors of safety incidents’ (OR = 1.69, 95% CI = 1.36 to 2.03). Physical multimorbidity was associated with an increased risk for active safety incidents (OR = 1.63, 95% CI = 1.45 to 1.80) but was not associated with precursors of safety incidents (OR = 1.02, 95% CI = 0.90 to 1.13). Statistical heterogeneity was high and the methodological quality of the studies was generally low. Conclusions The association between multimorbidity and patient safety is complex, and varies by type of multimorbidity and type of safety incident. Our analyses suggest that multimorbidity

Simulation for Prediction of Entry Article Demise (SPEAD): An Analysis Tool for Spacecraft Safety Analysis and Ascent/Reentry Risk Assessment

NASA Technical Reports Server (NTRS)

Ling, Lisa

2014-01-01

For the purpose of performing safety analysis and risk assessment for a potential off-nominal atmospheric reentry resulting in vehicle breakup, a synthesis of trajectory propagation coupled with thermal analysis and the evaluation of node failure is required to predict the sequence of events, the timeline, and the progressive demise of spacecraft components. To provide this capability, the Simulation for Prediction of Entry Article Demise (SPEAD) analysis tool was developed. The software and methodology have been validated against actual flights, telemetry data, and validated software, and safety/risk analyses were performed for various programs using SPEAD. This report discusses the capabilities, modeling, validation, and application of the SPEAD analysis tool.

FY2017 Updates to the SAS4A/SASSYS-1 Safety Analysis Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanning, T. H.

The SAS4A/SASSYS-1 safety analysis software is used to perform deterministic analysis of anticipated events as well as design-basis and beyond-design-basis accidents for advanced fast reactors. It plays a central role in the analysis of U.S. DOE conceptual designs, proposed test and demonstration reactors, and in domestic and international collaborations. This report summarizes the code development activities that have taken place during FY2017. Extensions to the void and cladding reactivity feedback models have been implemented, and Control System capabilities have been improved through a new virtual data acquisition system for plant state variables and an additional Block Signal for a variablemore » lag compensator to represent reactivity feedback for novel shutdown devices. Current code development and maintenance needs are also summarized in three key areas: software quality assurance, modeling improvements, and maintenance of related tools. With ongoing support, SAS4A/SASSYS-1 can continue to fulfill its growing role in fast reactor safety analysis and help solidify DOE’s leadership role in fast reactor safety both domestically and in international collaborations.« less

[Concept analysis of a participatory approach to occupational safety and health].

PubMed

Yoshikawa, Etsuko

2013-01-01

The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

Bayesian Statistics and Uncertainty Quantification for Safety Boundary Analysis in Complex Systems

NASA Technical Reports Server (NTRS)

He, Yuning; Davies, Misty Dawn

2014-01-01

The analysis of a safety-critical system often requires detailed knowledge of safe regions and their highdimensional non-linear boundaries. We present a statistical approach to iteratively detect and characterize the boundaries, which are provided as parameterized shape candidates. Using methods from uncertainty quantification and active learning, we incrementally construct a statistical model from only few simulation runs and obtain statistically sound estimates of the shape parameters for safety boundaries.

Annotation analysis for testing drug safety signals using unstructured clinical notes

PubMed Central

2012-01-01

Background The electronic surveillance for adverse drug events is largely based upon the analysis of coded data from reporting systems. Yet, the vast majority of electronic health data lies embedded within the free text of clinical notes and is not gathered into centralized repositories. With the increasing access to large volumes of electronic medical data—in particular the clinical notes—it may be possible to computationally encode and to test drug safety signals in an active manner. Results We describe the application of simple annotation tools on clinical text and the mining of the resulting annotations to compute the risk of getting a myocardial infarction for patients with rheumatoid arthritis that take Vioxx. Our analysis clearly reveals elevated risks for myocardial infarction in rheumatoid arthritis patients taking Vioxx (odds ratio 2.06) before 2005. Conclusions Our results show that it is possible to apply annotation analysis methods for testing hypotheses about drug safety using electronic medical records. PMID:22541596

Crash Simulation and Animation: 'A New Approach for Traffic Safety Analysis'

DOT National Transportation Integrated Search

2001-02-01

This researchs objective is to present a methodology to supplement the conventional traffic safety analysis techniques. This methodology aims at using computer simulation to animate and visualize crash occurrence at high-risk locations. This methodol...

FEM Analysis of Glass/Epoxy Composite Based Industrial Safety Helmet

NASA Astrophysics Data System (ADS)

Ram, Khushi; Bajpai, Pramendra Kumar

2017-08-01

Recently, the use of fiber reinforced polymer in every field of engineering (automobile, industry and aerospace) and medical has increased due to its distinctive mechanical properties. The fiber based polymer composites are more popular because these have high strength, light in weight, low cost and easily available. In the present work, the finite element analysis (FEA) of glass/epoxy composite based industrial safety helmet has been performed using solid-works simulation software. The modeling results show that glass fiber reinforced epoxy composite can be used as a material for fabrication of industrial safety helmet which has good mechanical properties than the existing helmet material.

Knowledge and perceived implementation of food safety risk analysis framework in Latin America and the Caribbean region.

PubMed

Cherry, C; Mohr, A Hofelich; Lindsay, T; Diez-Gonzalez, F; Hueston, W; Sampedro, F

2014-12-01

Risk analysis is increasingly promoted as a tool to support science-based decisions regarding food safety. An online survey comprising 45 questions was used to gather information on the implementation of food safety risk analysis within the Latin American and Caribbean regions. Professionals working in food safety in academia, government, and private sectors in Latin American and Caribbean countries were contacted by email and surveyed to assess their individual knowledge of risk analysis and perceptions of its implementation in the region. From a total of 279 participants, 97% reported a familiarity with risk analysis concepts; however, fewer than 25% were able to correctly identify its key principles. The reported implementation of risk analysis among the different professional sectors was relatively low (46%). Participants from industries in countries with a long history of trade with the United States and the European Union, such as Mexico, Brazil, and Chile, reported perceptions of a higher degree of risk analysis implementation (56, 50, and 20%, respectively) than those from the rest of the countries, suggesting that commerce may be a driver for achieving higher food safety standards. Disagreement among respondents on the extent of the use of risk analysis in national food safety regulations was common, illustrating a systematic lack of understanding of the current regulatory status of the country. The results of this survey can be used to target further risk analysis training on selected sectors and countries.

Flight deck party line issues : an Aviation Safety Reporting System analysis

DOT National Transportation Integrated Search

1995-06-01

This document describes an analysis of the Aviation Safety Reporting System : (ASRS) database with regards to human factors aspects concerning the : implementation of Data Link into the flightdeck. The ASRS database contains : thousands of reports co...

Work zone safety analysis and modeling: a state-of-the-art review.

PubMed

Yang, Hong; Ozbay, Kaan; Ozturk, Ozgur; Xie, Kun

2015-01-01

Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for work zone safety. To address this deficit, this article aims to provide a comprehensive review of the existing extensive research efforts focused on work zone crash-related analysis and modeling, in the hopes of providing researchers and practitioners with a complete overview. Relevant literature published in the last 5 decades was retrieved from the National Work Zone Crash Information Clearinghouse and the Transport Research International Documentation database and other public digital libraries and search engines. Both peer-reviewed publications and research reports were obtained. Each study was carefully reviewed, and those that focused on either work zone crash data analysis or work zone safety modeling were identified. The most relevant studies are specifically examined and discussed in the article. The identified studies were carefully synthesized to understand the state of knowledge on work zone safety. Agreement and inconsistency regarding the characteristics of the work zone crashes discussed in the descriptive studies were summarized. Progress and issues about the current practices on work zone crash frequency and severity modeling are also explored and discussed. The challenges facing work zone safety research are then presented. The synthesis of the literature suggests that the presence of a work zone is likely to increase the crash rate. Crashes are not uniformly distributed within work zones and rear-end crashes are the most prevalent type of crashes in work zones. There was no across-the-board agreement among numerous papers reviewed on the relationship between work zone

Using Qualitative Hazard Analysis to Guide Quantitative Safety Analysis

NASA Technical Reports Server (NTRS)

Shortle, J. F.; Allocco, M.

2005-01-01

Quantitative methods can be beneficial in many types of safety investigations. However, there are many difficulties in using quantitative m ethods. Far example, there may be little relevant data available. This paper proposes a framework for using quantitative hazard analysis to prioritize hazard scenarios most suitable for quantitative mziysis. The framework first categorizes hazard scenarios by severity and likelihood. We then propose another metric "modeling difficulty" that desc ribes the complexity in modeling a given hazard scenario quantitatively. The combined metrics of severity, likelihood, and modeling difficu lty help to prioritize hazard scenarios for which quantitative analys is should be applied. We have applied this methodology to proposed concepts of operations for reduced wake separation for airplane operatio ns at closely spaced parallel runways.

Analysis of existing work-zone devices with MASH safety performance criteria.

DOT National Transportation Integrated Search

2009-02-01

Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to : predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine : which hardware param...

75 FR 8239 - School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... 0584-AD65 School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles... Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP) was published on... of Management and Budget (OMB) cleared the associated information collection requirements (ICR) on...

Safety Analysis of Soybean Processing for Advanced Life Support

NASA Technical Reports Server (NTRS)

Hentges, Dawn L.

1999-01-01

Soybeans (cv. Hoyt) is one of the crops planned for food production within the Advanced Life Support System Integration Testbed (ALSSIT), a proposed habitat simulation for long duration lunar/Mars missions. Soybeans may be processed into a variety of food products, including soymilk, tofu, and tempeh. Due to the closed environmental system and importance of crew health maintenance, food safety is a primary concern on long duration space missions. Identification of the food safety hazards and critical control points associated with the closed ALSSIT system is essential for the development of safe food processing techniques and equipment. A Hazard Analysis Critical Control Point (HACCP) model was developed to reflect proposed production and processing protocols for ALSSIT soybeans. Soybean processing was placed in the type III risk category. During the processing of ALSSIT-grown soybeans, critical control points were identified to control microbiological hazards, particularly mycotoxins, and chemical hazards from antinutrients. Critical limits were suggested at each CCP. Food safety recommendations regarding the hazards and risks associated with growing, harvesting, and processing soybeans; biomass management; and use of multifunctional equipment were made in consideration of the limitations and restraints of the closed ALSSIT.

Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

Patient safety in the clinical laboratory: a longitudinal analysis of specimen identification errors.

PubMed

Wagar, Elizabeth A; Tamashiro, Lorraine; Yasin, Bushra; Hilborne, Lee; Bruckner, David A

2006-11-01

Patient safety is an increasingly visible and important mission for clinical laboratories. Attention to improving processes related to patient identification and specimen labeling is being paid by accreditation and regulatory organizations because errors in these areas that jeopardize patient safety are common and avoidable through improvement in the total testing process. To assess patient identification and specimen labeling improvement after multiple implementation projects using longitudinal statistical tools. Specimen errors were categorized by a multidisciplinary health care team. Patient identification errors were grouped into 3 categories: (1) specimen/requisition mismatch, (2) unlabeled specimens, and (3) mislabeled specimens. Specimens with these types of identification errors were compared preimplementation and postimplementation for 3 patient safety projects: (1) reorganization of phlebotomy (4 months); (2) introduction of an electronic event reporting system (10 months); and (3) activation of an automated processing system (14 months) for a 24-month period, using trend analysis and Student t test statistics. Of 16,632 total specimen errors, mislabeled specimens, requisition mismatches, and unlabeled specimens represented 1.0%, 6.3%, and 4.6% of errors, respectively. Student t test showed a significant decrease in the most serious error, mislabeled specimens (P < .001) when compared to before implementation of the 3 patient safety projects. Trend analysis demonstrated decreases in all 3 error types for 26 months. Applying performance-improvement strategies that focus longitudinally on specimen labeling errors can significantly reduce errors, therefore improving patient safety. This is an important area in which laboratory professionals, working in interdisciplinary teams, can improve safety and outcomes of care.

Safe Kids Week: Analysis of gender bias in a national child safety campaign, 1997-2016.

PubMed

Bauer, Michelle E E; Brussoni, Mariana; Giles, Audrey R; Fuselli, Pamela

2017-09-29

Background and Purpose Child safety campaigns play an important role in disseminating injury prevention information to families. A critical discourse analysis of gender bias in child safety campaign marketing materials can offer important insights into how families are represented and the potential influence that gender bias may have on uptake of injury prevention information. Methods Our approach was informed by poststructural feminist theory, and we used critical discourse analysis to identify discourses within the poster materials. We examined the national Safe Kids Canada Safe Kids Week campaign poster material spanning twenty years (1997-2016). Specifically, we analyzed the posters' typeface, colour, images, and language to identify gender bias in relation to discourses surrounding parenting, safety, and societal perceptions of gender. Results The findings show that there is gender bias present in the Safe Kids Week poster material. The posters represent gender as binary, mothers as primary caregivers, and showcase stereotypically masculine sporting equipment among boys and stereotypically feminine equipment among girls. Interestingly, we found that the colour and typeface of the text both challenge and perpetuate the feminization of safety. Discussion It is recommended that future child safety campaigns represent changing family dynamics, include representations of children with non-traditionally gendered sporting equipment, and avoid the representation of gender as binary. This analysis contributes to the discussion of the feminization of safety in injury prevention research and challenges the ways in which gender is represented in child safety campaigns. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browne, E.T.

1981-03-01

This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

Ares-I-X Vehicle Preliminary Range Safety Malfunction Turn Analysis

NASA Technical Reports Server (NTRS)

Beaty, James R.; Starr, Brett R.; Gowan, John W., Jr.

2008-01-01

Ares-I-X is the designation given to the flight test version of the Ares-I rocket (also known as the Crew Launch Vehicle - CLV) being developed by NASA. As part of the preliminary flight plan approval process for the test vehicle, a range safety malfunction turn analysis was performed to support the launch area risk assessment and vehicle destruct criteria development processes. Several vehicle failure scenarios were identified which could cause the vehicle trajectory to deviate from its normal flight path, and the effects of these failures were evaluated with an Ares-I-X 6 degrees-of-freedom (6-DOF) digital simulation, using the Program to Optimize Simulated Trajectories Version 2 (POST2) simulation framework. The Ares-I-X simulation analysis provides output files containing vehicle state information, which are used by other risk assessment and vehicle debris trajectory simulation tools to determine the risk to personnel and facilities in the vicinity of the launch area at Kennedy Space Center (KSC), and to develop the vehicle destruct criteria used by the flight test range safety officer. The simulation analysis approach used for this study is described, including descriptions of the failure modes which were considered and the underlying assumptions and ground rules of the study, and preliminary results are presented, determined by analysis of the trajectory deviation of the failure cases, compared with the expected vehicle trajectory.

Reliability/safety analysis of a fly-by-wire system

NASA Technical Reports Server (NTRS)

Brock, L. D.; Goddman, H. A.

1980-01-01

An analysis technique has been developed to estimate the reliability of a very complex, safety-critical system by constructing a diagram of the reliability equations for the total system. This diagram has many of the characteristics of a fault-tree or success-path diagram, but is much easier to construct for complex redundant systems. The diagram provides insight into system failure characteristics and identifies the most likely failure modes. A computer program aids in the construction of the diagram and the computation of reliability. Analysis of the NASA F-8 Digital Fly-by-Wire Flight Control System is used to illustrate the technique.

Statistical issues in the design, conduct and analysis of two large safety studies.

PubMed

Gaffney, Michael

2016-10-01

The emergence, post approval, of serious medical events, which may be associated with the use of a particular drug or class of drugs, is an important public health and regulatory issue. The best method to address this issue is through a large, rigorously designed safety study. Therefore, it is important to elucidate the statistical issues involved in these large safety studies. Two such studies are PRECISION and EAGLES. PRECISION is the primary focus of this article. PRECISION is a non-inferiority design with a clinically relevant non-inferiority margin. Statistical issues in the design, conduct and analysis of PRECISION are discussed. Quantitative and clinical aspects of the selection of the composite primary endpoint, the determination and role of the non-inferiority margin in a large safety study and the intent-to-treat and modified intent-to-treat analyses in a non-inferiority safety study are shown. Protocol changes that were necessary during the conduct of PRECISION are discussed from a statistical perspective. Issues regarding the complex analysis and interpretation of the results of PRECISION are outlined. EAGLES is presented as a large, rigorously designed safety study when a non-inferiority margin was not able to be determined by a strong clinical/scientific method. In general, when a non-inferiority margin is not able to be determined, the width of the 95% confidence interval is a way to size the study and to assess the cost-benefit of relative trial size. A non-inferiority margin, when able to be determined by a strong scientific method, should be included in a large safety study. Although these studies could not be called "pragmatic," they are examples of best real-world designs to address safety and regulatory concerns. © The Author(s) 2016.

Safety analysis of urban arterials at the meso level.

PubMed

Li, Jia; Wang, Xuesong

2017-11-01

Urban arterials form the main structure of street networks. They typically have multiple lanes, high traffic volume, and high crash frequency. Classical crash prediction models investigate the relationship between arterial characteristics and traffic safety by treating road segments and intersections as isolated units. This micro-level analysis does not work when examining urban arterial crashes because signal spacing is typically short for urban arterials, and there are interactions between intersections and road segments that classical models do not accommodate. Signal spacing also has safety effects on both intersections and road segments that classical models cannot fully account for because they allocate crashes separately to intersections and road segments. In addition, classical models do not consider the impact on arterial safety of the immediately surrounding street network pattern. This study proposes a new modeling methodology that will offer an integrated treatment of intersections and road segments by combining signalized intersections and their adjacent road segments into a single unit based on road geometric design characteristics and operational conditions. These are called meso-level units because they offer an analytical approach between micro and macro. The safety effects of signal spacing and street network pattern were estimated for this study based on 118 meso-level units obtained from 21 urban arterials in Shanghai, and were examined using CAR (conditional auto regressive) models that corrected for spatial correlation among the units within individual arterials. Results showed shorter arterial signal spacing was associated with higher total and PDO (property damage only) crashes, while arterials with a greater number of parallel roads were associated with lower total, PDO, and injury crashes. The findings from this study can be used in the traffic safety planning, design, and management of urban arterials. Copyright © 2017 Elsevier Ltd. All

Use of cultural consensus analysis to evaluate expert feedback of median safety.

PubMed

Kim, Tae-Gyu; Donnell, Eric T; Lee, Dongmin

2008-07-01

Cultural consensus analysis is a statistical method that can be used to assess participant responses to survey questions. The technique concurrently estimates the knowledge of each survey participant and estimates the culturally correct answer to each question asked, based on the existence of consensus among survey participants. The main objectives of this paper are to present the cultural consensus methodology and apply it to a set of median design and safety survey data that were collected using the Delphi method. A total of 21 Delphi survey participants were asked to answer research questions related to cross-median crashes. It was found that the Delphi panel had agreeable opinions with respect to the association of average daily traffic (ADT) and heavy vehicle percentage combination on the risk of cross-median crashes; relative importance of additional factors, other than ADT, median width, and crash history that may contribute to cross-median crashes; and, the relative importance of geometric factors that may be associated with the likelihood of cross-median crashes. Therefore, the findings from the cultural consensus analysis indicate that the expert panel selected to participate in the Delphi survey shared a common knowledge pool relative to the association between median design and safety. There were, however, diverse opinions regarding median barrier type and its preferred placement location. The panel showed a higher level of knowledge on the relative importance regarding the association of geometric factors on cross-median crashes likelihood than on other issues considered. The results of the cultural consensus analysis of the present median design and safety survey data could be used to design a focused field study of median safety.

Integrated Safety Risk Reduction Approach to Enhancing Human-Rated Spaceflight Safety

NASA Astrophysics Data System (ADS)

Mikula, J. F. Kip

2005-12-01

This paper explores and defines the current accepted concept and philosophy of safety improvement based on a Reliability enhancement (called here Reliability Enhancement Based Safety Theory [REBST]). In this theory a Reliability calculation is used as a measure of the safety achieved on the program. This calculation may be based on a math model or a Fault Tree Analysis (FTA) of the system, or on an Event Tree Analysis (ETA) of the system's operational mission sequence. In each case, the numbers used in this calculation are hardware failure rates gleaned from past similar programs. As part of this paper, a fictional but representative case study is provided that helps to illustrate the problems and inaccuracies of this approach to safety determination. Then a safety determination and enhancement approach based on hazard, worst case analysis, and safety risk determination (called here Worst Case Based Safety Theory [WCBST]) is included. This approach is defined and detailed using the same example case study as shown in the REBST case study. In the end it is concluded that an approach combining the two theories works best to reduce Safety Risk.

Safety and efficacy of ezetimibe: A meta-analysis.

PubMed

Savarese, Gianluigi; De Ferrari, Gaetano M; Rosano, Giuseppe M C; Perrone-Filardi, Pasquale

2015-12-15

The addition of ezetimibe to statin therapy has been widely demonstrated to significantly reduce low-density lipoprotein cholesterol levels. However, the efficacy of ezetimibe in reducing CV events and its safety has been less investigated. The aim of the current meta-analysis was to report efficacy and safety of ezetimibe from randomized clinical trials. Randomized clinical trials with a follow-up of at least 24 weeks, enrolling more than 200 patients, comparing ezetimibe versus placebo or ezetimibe plus another hypolipidemic agent versus the same hypolipidemic drug alone and reporting at least one event among all-cause and CV mortality, myocardial infarction (MI), stroke and new onset of cancer were included in the analysis. 7 trials enrolling 31,048 patients (median follow-up 34.1 ± 26.3 months; 70% women; mean age 61 ± 8 years) were included in the analysis. Compared to control therapy, ezetimibe significantly reduced the risk of MI by 13.5% (RR: 0.865, 95% CI: 0.801 to 0.934, p<0.001) and the risk of any stroke by 16.0% (RR: 0.840, 95% CI: 0.744 to 0.949, p=0.005), without any effect on all-cause and CV mortality (RR: 1.003, 95% CI: 0.954 to 1.055, p=0.908; RR: 0.958, 95% CI: 0.879 to 1.044, p=0.330; respectively) and risk of new cancer (RR: 1.040, 95% CI: 0.965 to 1.120, p=0.303). Ezetimibe significantly reduces the risk of MI and stroke without any effect on all-cause and CV mortality and risk of cancer. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Seepage-Based Factor of Safety Analysis Using 3D Groundwater Simulation Results

DTIC Science & Technology

2014-08-01

Edris, and D . Richards. 2006. A first-principle, physics- based watershed model: WASH123D. In Watershed models, ed. V. P. Singh and D . K . Frevert...should be cited as follows: Cheng, H.-P., K . D . Winters, S. M. England, and R. E. Pickett. 2014. Factor of safety analysis using 3D groundwater...Journal of Dam Safety 11(3): 33–42. Pickett, R. E., K . D . Winters, H.-P. Cheng, and S. M. England. 2013. Herbert Hoover Dike (HHD) flow model. Project

A Monte-Carlo simulation analysis for evaluating the severity distribution functions (SDFs) calibration methodology and determining the minimum sample-size requirements.

PubMed

Shirazi, Mohammadali; Reddy Geedipally, Srinivas; Lord, Dominique

2017-01-01

Severity distribution functions (SDFs) are used in highway safety to estimate the severity of crashes and conduct different types of safety evaluations and analyses. Developing a new SDF is a difficult task and demands significant time and resources. To simplify the process, the Highway Safety Manual (HSM) has started to document SDF models for different types of facilities. As such, SDF models have recently been introduced for freeway and ramps in HSM addendum. However, since these functions or models are fitted and validated using data from a few selected number of states, they are required to be calibrated to the local conditions when applied to a new jurisdiction. The HSM provides a methodology to calibrate the models through a scalar calibration factor. However, the proposed methodology to calibrate SDFs was never validated through research. Furthermore, there are no concrete guidelines to select a reliable sample size. Using extensive simulation, this paper documents an analysis that examined the bias between the 'true' and 'estimated' calibration factors. It was indicated that as the value of the true calibration factor deviates further away from '1', more bias is observed between the 'true' and 'estimated' calibration factors. In addition, simulation studies were performed to determine the calibration sample size for various conditions. It was found that, as the average of the coefficient of variation (CV) of the 'KAB' and 'C' crashes increases, the analyst needs to collect a larger sample size to calibrate SDF models. Taking this observation into account, sample-size guidelines are proposed based on the average CV of crash severities that are used for the calibration process. Copyright © 2016 Elsevier Ltd. All rights reserved.

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

37 CFR 202.17 - Renewals

Code of Federal Regulations, 2012 CFR

2012-07-01

...://www.copyright.gov. Copies of Form RE are also available free upon request to the Copyright Information... copyright for the original term of the work. The Form RE/Addendum is used to provide this information. (3... by submission of a Form RE/Addendum. The Addendum, an adjunct to the renewal form, concerns the facts...

37 CFR 202.17 - Renewals

Code of Federal Regulations, 2014 CFR

2014-07-01

... http://www.copyright.gov. Copies of Form RE are also available free upon Request. Requests should be... copyright for the original term of the work. The Form RE/Addendum is used to provide this information. (3... by submission of a Form RE/Addendum. The Addendum, an adjunct to the renewal form, concerns the facts...

37 CFR 202.17 - Renewals

Code of Federal Regulations, 2013 CFR

2013-07-01

...://www.copyright.gov. Copies of Form RE are also available free upon request to the Copyright Information... copyright for the original term of the work. The Form RE/Addendum is used to provide this information. (3... by submission of a Form RE/Addendum. The Addendum, an adjunct to the renewal form, concerns the facts...

78 FR 4477 - Review of Safety Analysis Reports for Nuclear Power Plants, Introduction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0268] Review of Safety Analysis Reports for Nuclear Power... Analysis Reports for Nuclear Power Plants: LWR Edition.'' The new subsection is the Standard Review Plan... Nuclear Power Plants: Integral Pressurized Water Reactor (iPWR) Edition.'' DATES: Comments must be filed...

Adapting Cognitive Task Analysis to Investigate Clinical Decision Making and Medication Safety Incidents.

PubMed

Russ, Alissa L; Militello, Laura G; Glassman, Peter A; Arthur, Karen J; Zillich, Alan J; Weiner, Michael

2017-05-03

Cognitive task analysis (CTA) can yield valuable insights into healthcare professionals' cognition and inform system design to promote safe, quality care. Our objective was to adapt CTA-the critical decision method, specifically-to investigate patient safety incidents, overcome barriers to implementing this method, and facilitate more widespread use of cognitive task analysis in healthcare. We adapted CTA to facilitate recruitment of healthcare professionals and developed a data collection tool to capture incidents as they occurred. We also leveraged the electronic health record (EHR) to expand data capture and used EHR-stimulated recall to aid reconstruction of safety incidents. We investigated 3 categories of medication-related incidents: adverse drug reactions, drug-drug interactions, and drug-disease interactions. Healthcare professionals submitted incidents, and a subset of incidents was selected for CTA. We analyzed several outcomes to characterize incident capture and completed CTA interviews. We captured 101 incidents. Eighty incidents (79%) met eligibility criteria. We completed 60 CTA interviews, 20 for each incident category. Capturing incidents before interviews allowed us to shorten the interview duration and reduced reliance on healthcare professionals' recall. Incorporating the EHR into CTA enriched data collection. The adapted CTA technique was successful in capturing specific categories of safety incidents. Our approach may be especially useful for investigating safety incidents that healthcare professionals "fix and forget." Our innovations to CTA are expected to expand the application of this method in healthcare and inform a wide range of studies on clinical decision making and patient safety.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Meta-analysis of food safety training on hand hygiene knowledge and attitudes among food handlers.

PubMed

Soon, Jan Mei; Baines, Richard; Seaman, Phillip

2012-04-01

Research has shown that traditional food safety training programs and strategies to promote hand hygiene increases knowledge of the subject. However, very few studies have been conducted to evaluate the impact of food safety training on food handlers' attitudes about good hand hygiene practices. The objective of this meta-analytical study was to assess the extent to which food safety training or intervention strategies increased knowledge of and attitudes about hand hygiene. A systematic review of food safety training articles was conducted. Additional studies were identified from abstracts from food safety conferences and food science education conferences. Search terms included combinations of "food safety," "food hygiene," "training," "education," "hand washing," "hand hygiene," "knowledge," "attitudes," "practices," "behavior," and "food handlers." Only before- and after-training approaches and cohort studies with training (intervention group) and without training (control group) in hand hygiene knowledge and including attitudes in food handlers were evaluated. All pooled analyses were based on a random effects model. Meta-analysis values for nine food safety training and intervention studies on hand hygiene knowledge among food handlers were significantly higher than those of the control (without training), with an effect size (Hedges' g) of 1.284 (95% confidence interval [CI] ∼ 0.830 to 1.738). Meta-analysis of five food safety training and intervention studies in which hand hygiene attitudes and self-reported practices were monitored produced a summary effect size of 0.683 (95% CI ∼ 0.523 to 0.843). Food safety training increased knowledge and improved attitudes about hand hygiene practices. Refresher training and long-term reinforcement of good food handling behaviors may also be beneficial for sustaining good hand washing practices.

Car manufacturers and global road safety: a word frequency analysis of road safety documents.

PubMed

Roberts, I; Wentz, R; Edwards, P

2006-10-01

The World Bank believes that the car manufacturers can make a valuable contribution to road safety in poor countries and has established the Global Road Safety Partnership (GRSP) for this purpose. However, some commentators are sceptical. The authors examined road safety policy documents to assess the extent of any bias. Word frequency analyses of road safety policy documents from the World Health Organization (WHO) and the GRSP. The relative occurrence of key road safety terms was quantified by calculating a word prevalence ratio with 95% confidence intervals. Terms for which there was a fourfold difference in prevalence between the documents were tabulated. Compared to WHO's World report on road traffic injury prevention, the GRSP road safety documents were substantially less likely to use the words speed, speed limits, child restraint, pedestrian, public transport, walking, and cycling, but substantially more likely to use the words school, campaign, driver training, and billboard. There are important differences in emphasis in road safety policy documents prepared by WHO and the GRSP. Vigilance is needed to ensure that the road safety interventions that the car industry supports are based on sound evidence of effectiveness.

Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis

NASA Technical Reports Server (NTRS)

Massie, Michael J.; Morris, A. Terry

2010-01-01

Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.

Comparative efficacy and safety of six antidepressants and anticonvulsants in painful diabetic neuropathy: a network meta-analysis.

PubMed

Rudroju, Neelima; Bansal, Dipika; Talakokkula, Shiva Teja; Gudala, Kapil; Hota, Debasish; Bhansali, Anil; Ghai, Babita

2013-01-01

Anticonvulsants and antidepressants are mostly used in management of painful diabetic neuropathy (PDN). However there are few direct comparisons between drugs of these classes, making evidence-based decision-making in the treatment of painful diabetic neuropathy difficult. This study aimed to perform a network meta-analysis and benefit-risk analysis to evaluate the comparative efficacy and safety of these drugs in PDN treatment. Comparative effectiveness study. Medical Education and Research facility in India. A comprehensive data search was done in PubMed, Cochrane, and Embase up to August 2012. We then systematically reviewed the studies which compared any of 6 drugs for the management of PDN: amitriptyline, duloxetine, gabapentin, pregabalin, valproate, and venlafaxine or any of their combinations. We performed a random-effects network meta-analysis to rank treatments in terms of efficacy and safety. We chose the number of patients experiencing = 50% reduction in pain and number of patient withdrawals due to adverse events (AE) as primary outcomes for efficacy and safety, respectively. We also performed benefit-risk analysis, taking efficacy outcome as benefit and safety outcome as risk. Analysis was intention-to-treat. We included 21 published trials in the analysis. Duloxetine, gabapentin, pregabalin, and venlafaxine were shown to be significantly efficacious compared to placebo with odds ratios (OR) of 2.12, 3.98, 2.78, and 4.43, respectively. Amitriptyline (OR: 7.03, 95% confidence interval [CI]: 1.87, 29.05) and duloxetine (OR: 3.26, 95% CI: 1.04, 9.97) caused more withdrawals than gabapentin. The ranking order of efficacy was gabapentin, venlafaxine, pregabalin, duloxetine/gabapentin, duloxetine, amitriptyline, and placebo and the ranking order of safety was placebo, gabapentin, pregabalin, venlafaxine, duloxetine/gabapentin combination, duloxetine, and amitriptyline. Benefit-risk balance favored the order: gabapentin, venlafaxine, pregabalin, duloxetine

Fault Tree Analysis Application for Safety and Reliability

NASA Technical Reports Server (NTRS)

Wallace, Dolores R.

2003-01-01

Many commercial software tools exist for fault tree analysis (FTA), an accepted method for mitigating risk in systems. The method embedded in the tools identifies a root as use in system components, but when software is identified as a root cause, it does not build trees into the software component. No commercial software tools have been built specifically for development and analysis of software fault trees. Research indicates that the methods of FTA could be applied to software, but the method is not practical without automated tool support. With appropriate automated tool support, software fault tree analysis (SFTA) may be a practical technique for identifying the underlying cause of software faults that may lead to critical system failures. We strive to demonstrate that existing commercial tools for FTA can be adapted for use with SFTA, and that applied to a safety-critical system, SFTA can be used to identify serious potential problems long before integrator and system testing.

Safety climate and mindful safety practices in the oil and gas industry.

PubMed

Dahl, Øyvind; Kongsvik, Trond

2018-02-01

The existence of a positive association between safety climate and the safety behavior of sharp-end workers in high-risk organizations is supported by a considerable body of research. Previous research has primarily analyzed two components of safety behavior, namely safety compliance and safety participation. The present study extends previous research by looking into the relationship between safety climate and another component of safety behavior, namely mindful safety practices. Mindful safety practices are defined as the ability to be aware of critical factors in the environment and to act appropriately when dangers arise. Regression analysis was used to examine whether mindful safety practices are, like compliance and participation, promoted by a positive safety climate, in a questionnaire-based study of 5712 sharp-end workers in the oil and gas industry. The analysis revealed that a positive safety climate promotes mindful safety practices. The regression model accounted for roughly 31% of the variance in mindful safety practices. The most important safety climate factor was safety leadership. The findings clearly demonstrate that mindful safety practices are highly context-dependent, hence, manageable and susceptible to change. In order to improve safety climate in a direction which is favorable for mindful safety practices, the results demonstrate that it is important to give the fundamental features of safety climate high priority and in particular that of safety leadership. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

RECERTIFICATION OF THE MODEL 9977 RADIOACTIVE MATERIAL PACKAGING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, G.; Bellamy, S.; Loftin, B.

2013-06-05

The Model 9977 Packaging was initially issued a Certificate of Compliance (CoC) by the Department of Energy’s Office of Environmental Management (DOE-EM) for the transportation of radioactive material (RAM) in the Fall of 2007. This first CoC was for a single radioactive material and two packing configurations. In the five years since that time, seven Addendums have been written to the Safety Analysis Report for Packaging (SARP) and five Letter Amendments have been written that have authorized either new RAM contents or packing configurations, or both. This paper will discuss the process of updating the 9977 SARP to include allmore » the contents and configurations, including the addition of a new content, and its submittal for recertification.« less

[Effects, safety and cost-benefit analysis of Down syndrome screening in first trimester].

PubMed

Shengmou, Lin; Min, Chen; Chenhong, Wang; Shengli, Li; Jiansheng, Xie; Hui, Yuan; Dinghao, Lin; Xiaoxia, Wu; Wei, Wang; Hongyun, Zhang; Haiyan, Tang

2014-05-01

To investigate the effects, safety and cost-benefit analysis of Down syndrome screening in first trimester. From January 2009 to December 2012, 43 729 pregnant women undergoing 3 methods of Down syndrome traditional screening strategies in Shenzhen Maternity and Child Healthcare Hospital were studied retrospectively, including in 17 502 cases in pregnancy associated plasma protein A (PAPP-A) and free β-hCG measured biochemistry screening, 14 080 cases in nuchal translucency (NT) screening and 12 147 cases in combined screening, meanwhile, 7 389 cases on non-invasive fetal trisomy test (NIFTY) were performed in Huada Gene Research Institute(BGI). The effects and safety of four screening strategies were assessed throughout a decision tree. The economical characters of each screening strategy were compared by cost-effectiveness analysis as well as cost-benefit analysis. (1) The effects of four strategies are: NIFTY > combined screening > NT screening > biochemistry screening. (2) The safety of four strategies are: NIFTY > combined screening > NT screening > biochemistry screening. (3) Cost-effectiveness analysis and cost-benefit analysis:the biochemistry screening has lowest cost-effectiveness ratio (CER) and highest cost-benefit ratio (CBR), which performed a better economical efficiency. The incremental CER of three traditional screening strategies are all less than the economical burden of Down syndrome.NIFTY has highest CER and negative net present value (NPV), NPV would be positive and CBR would be more than 1 if the price of NIFTY reduce to 1 434 Yuan. Combined screening possess best screening efficiency, while biochemistry screening was demonstrated more economical in traditional screening.NIFTY is the future of Down syndrome screening.

Safety and Efficacy of Methotrexate in Psoriasis: A Meta-Analysis of Published Trials

PubMed Central

West, Jonathan; Ogston, Simon; Foerster, John

2016-01-01

Background Methotrexate (MTX) has been used to treat psoriasis for over half a century. Even so, clinical data characterising its efficacy and safety are sparse. Objective In order to enhance the available evidence, we conducted two meta-analyses, one for efficacy and one for safety outcomes, respectively, according to PRISMA checklist. (Data sources, study criteria, and study synthesis methods are detailed in Methods). Results In terms of efficacy, only eleven studies met criteria for study design and passed a Cochrane risk of bias analysis. Based on this limited dataset, 45.2% [95% confidence interval 34.1–60.0] of patients achieve PASI75 at primary endpoint (12 or 16 weeks, respectively, n = 705 patients across all studies), compared to a calculated PASI75 of 4.4 [3.5–5.6] for placebo, yielding a relative risk of 10.2 [95% C.I. 7.1–14.7]. For safety outcomes, we extended the meta-analysis to include studies employing the same dose range of MTX for other chronic inflammatory conditions, e.g. rheumatoid arthritis, in order not to maximise capture of relevant safety data. Based on 2763 patient safety years, adverse events (AEs) were found treatment limiting in 6.9 ± 1.4% (mean ± s.e.) of patients treated for six months, with an adverse effect profile largely in line with that encountered in clinical practice. Finally, in order to facilitate prospective clinical audit and to help generate long-term treatment outcomes under real world conditions, we also developed an easy to use documentation form to be completed by patients without requirement for additional staff time. Limitations Meta-analyses for efficacy and safety, respectively, employed non-identical selection criteria. Conclusions These meta-analyses summarise currently available evidence on MTX in psoriasis and should be of use to gauge whether local results broadly fall within outcomes. PMID:27168193

Safety Analysis and Protection Measures of the Control System of the Pulsed High Magnetic Field Facility in WHMFC

NASA Astrophysics Data System (ADS)

Shi, J. T.; Han, X. T.; Xie, J. F.; Yao, L.; Huang, L. T.; Li, L.

2013-03-01

A Pulsed High Magnetic Field Facility (PHMFF) has been established in Wuhan National High Magnetic Field Center (WHMFC) and various protection measures are applied in its control system. In order to improve the reliability and robustness of the control system, the safety analysis of the PHMFF is carried out based on Fault Tree Analysis (FTA) technique. The function and realization of 5 protection systems, which include sequence experiment operation system, safety assistant system, emergency stop system, fault detecting and processing system and accident isolating protection system, are given. The tests and operation indicate that these measures improve the safety of the facility and ensure the safety of people.

Safety System Design for Technology Education. A Safety Guide for Technology Education Courses K-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This manual is designed to involve both teachers and students in planning and controlling a safety system for technology education classrooms. The safety program involves students in the design and maintenance of the system by including them in the analysis of the classroom environment, job safety analysis, safety inspection, and machine safety…

The Relationship Between Professional Burnout and Quality and Safety in Healthcare: A Meta-Analysis.

PubMed

Salyers, Michelle P; Bonfils, Kelsey A; Luther, Lauren; Firmin, Ruth L; White, Dominique A; Adams, Erin L; Rollins, Angela L

2017-04-01

Healthcare provider burnout is considered a factor in quality of care, yet little is known about the consistency and magnitude of this relationship. This meta-analysis examined relationships between provider burnout (emotional exhaustion, depersonalization, and reduced personal accomplishment) and the quality (perceived quality, patient satisfaction) and safety of healthcare. Publications were identified through targeted literature searches in Ovid MEDLINE, PsycINFO, Web of Science, CINAHL, and ProQuest Dissertations & Theses through March of 2015. Two coders extracted data to calculate effect sizes and potential moderators. We calculated Pearson's r for all independent relationships between burnout and quality measures, using a random effects model. Data were assessed for potential impact of study rigor, outliers, and publication bias. Eighty-two studies including 210,669 healthcare providers were included. Statistically significant negative relationships emerged between burnout and quality (r = -0.26, 95 % CI [-0.29, -0.23]) and safety (r = -0.23, 95 % CI [-0.28, -0.17]). In both cases, the negative relationship implied that greater burnout among healthcare providers was associated with poorer-quality healthcare and reduced safety for patients. Moderators for the quality relationship included dimension of burnout, unit of analysis, and quality data source. Moderators for the relationship between burnout and safety were safety indicator type, population, and country. Rigor of the study was not a significant moderator. This is the first study to systematically, quantitatively analyze the links between healthcare provider burnout and healthcare quality and safety across disciplines. Provider burnout shows consistent negative relationships with perceived quality (including patient satisfaction), quality indicators, and perceptions of safety. Though the effects are small to medium, the findings highlight the importance of effective burnout interventions for

A hierarchical factor analysis of a safety culture survey.

PubMed

Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

2013-06-01

Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

[Analysis and modelling of safety culture in a Mexican hospital by Markov chains].

PubMed

Velázquez-Martínez, J D; Cruz-Suárez, H; Santos-Reyes, J

2016-01-01

The objective of this study was to analyse and model the safety culture with Markov chains, as well as predicting and/or prioritizing over time the evolutionary behaviour of the safety culture of the health's staff in one Mexican hospital. The Markov chain theory has been employed in the analysis, and the input data has been obtained from a previous study based on the Safety Attitude Questionnaire (CAS-MX-II), by considering the following 6 dimensions: safety climate, teamwork, job satisfaction, recognition of stress, perception of management, and work environment. The results highlighted the predictions and/or prioritisation of the approximate time for the possible integration into the evolutionary behaviour of the safety culture as regards the "slightly agree" (Likert scale) for: safety climate (in 12 years; 24.13%); teamwork (8 years; 34.61%); job satisfaction (11 years; 52.41%); recognition of the level of stress (8 years; 19.35%); and perception of the direction (22 years; 27.87%). The work environment dimension was unable to determine the behaviour of staff information, i.e. no information cultural roots were obtained. In general, it has been shown that there are weaknesses in the safety culture of the hospital, which is an opportunity to suggest changes to the mandatory policies in order to strengthen it. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

School Safety, Severe Disciplinary Actions, and School Characteristics: A Secondary Analysis of the School Survey on Crime and Safety

ERIC Educational Resources Information Center

Han, Seunghee; Akiba, Motoko

2011-01-01

On the basis of a secondary analysis of survey data collected from 1,872 secondary school principals in the 2005-2006 School Survey on Crime and Safety, we examined the frequency of and reasons for severe disciplinary actions and the relationship between school characteristics and severe disciplinary actions. We found that severe disciplinary…

Data Analysis Approaches for the Risk-Informed Safety Margins Characterization Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Alfonsi, Andrea; Maljovec, Daniel P.

2016-09-01

In the past decades, several numerical simulation codes have been employed to simulate accident dynamics (e.g., RELAP5-3D, RELAP-7, MELCOR, MAAP). In order to evaluate the impact of uncertainties into accident dynamics, several stochastic methodologies have been coupled with these codes. These stochastic methods range from classical Monte-Carlo and Latin Hypercube sampling to stochastic polynomial methods. Similar approaches have been introduced into the risk and safety community where stochastic methods (such as RAVEN, ADAPT, MCDET, ADS) have been coupled with safety analysis codes in order to evaluate the safety impact of timing and sequencing of events. These approaches are usually calledmore » Dynamic PRA or simulation-based PRA methods. These uncertainties and safety methods usually generate a large number of simulation runs (database storage may be on the order of gigabytes or higher). The scope of this paper is to present a broad overview of methods and algorithms that can be used to analyze and extract information from large data sets containing time dependent data. In this context, “extracting information” means constructing input-output correlations, finding commonalities, and identifying outliers. Some of the algorithms presented here have been developed or are under development within the RAVEN statistical framework.« less

[Social network analysis: a method to improve safety in healthcare organizations].

PubMed

Marqués Sánchez, Pilar; González Pérez, Marta Eva; Agra Varela, Yolanda; Vega Núñez, Jorge; Pinto Carral, Arrate; Quiroga Sánchez, Enedina

2013-01-01

Patient safety depends on the culture of the healthcare organization involving relationships between professionals. This article proposes that the study of these relations should be conducted from a network perspective and using a methodology called Social Network Analysis (SNA). This methodology includes a set of mathematical constructs grounded in Graph Theory. With the SNA we can know aspects of the individual's position in the network (centrality) or cohesion among team members. Thus, the SNA allows to know aspects related to security such as the kind of links that can increase commitment among professionals, how to build those links, which nodes have more prestige in the team in generating confidence or collaborative network, which professionals serve as intermediaries between the subgroups of a team to transmit information or smooth conflicts, etc. Useful aspects in stablishing a safety culture. The SNA would analyze the relations among professionals, their level of communication to communicate errors and spontaneously seek help and coordination between departments to participate in projects that enhance safety. Thus, they related through a network, using the same language, a fact that helps to build a culture. In summary, we propose an approach to safety culture from a SNA perspective that would complement other commonly used methods.

A statistical analysis of the impact of advertising signs on road safety.

PubMed

Yannis, George; Papadimitriou, Eleonora; Papantoniou, Panagiotis; Voulgari, Chrisoula

2013-01-01

This research aims to investigate the impact of advertising signs on road safety. An exhaustive review of international literature was carried out on the effect of advertising signs on driver behaviour and safety. Moreover, a before-and-after statistical analysis with control groups was applied on several road sites with different characteristics in the Athens metropolitan area, in Greece, in order to investigate the correlation between the placement or removal of advertising signs and the related occurrence of road accidents. Road accident data for the 'before' and 'after' periods on the test sites and the control sites were extracted from the database of the Hellenic Statistical Authority, and the selected 'before' and 'after' periods vary from 2.5 to 6 years. The statistical analysis shows no statistical correlation between road accidents and advertising signs in none of the nine sites examined, as the confidence intervals of the estimated safety effects are non-significant at 95% confidence level. This can be explained by the fact that, in the examined road sites, drivers are overloaded with information (traffic signs, directions signs, labels of shops, pedestrians and other vehicles, etc.) so that the additional information load from advertising signs may not further distract them.

Safety analysis

NASA Technical Reports Server (NTRS)

Knight, John C.

1995-01-01

We are engaged in a research program in safety-critical computing that is based on two case studies. We use these case studies to provide application-specific details of the various research issues, and as targets for evaluation of research ideas. The first case study is the Magnetic Stereotaxis System (MSS), an investigational device for performing human neurosurgery being developed in a joint effort between the Department of Physics at the University of Virginia and the Department of Neurosurgery at the University of Iowa. The system operates by manipulating a small permanent magnet (known as a 'seed') within the brain using an externally applied magnetic field. By varying the magnitude and gradient of the external magnetic field, the seed can be moved along a non-linear path and positioned at a site requiring therapy, e.g., a tumor. The magnetic field required for movement through brain tissue is extremely high, and is generated by a set of six superconducting magnets located in a housing surrounding the patient's head. The system uses two X-ray cameras positioned at right angles to detect in real time the locations of the seed and of X-ray opaque markers affixed to the patient's skull. the X-ray images are used to locate the objects of interest in a canonical frame of reference. the second case study is the University of Virginia Research Nuclear Reactor (UVAR). It is a 2 MW thermal, concrete-walled pool reactor. The system operates using 20 to 25 plate-type fuel assemblies placed on a rectangular grid plate. There are three scramable safety rods, and one non-scramable regulating rod that can be put in automatic mode. It was originally constructed in 1959 as a 1 MW system, and it was upgraded to 2 MW in 1973. Though only a research reactor rather than a power reactor, the issues raised are significant and can be related to the problems faced by full-scale reactor systems.

Worker safety and injury severity analysis of earthmoving equipment accidents.

PubMed

Kazan, Emrah; Usmen, Mumtaz A

2018-06-01

Research on construction worker safety associated with construction equipment has mostly focused on accident type rather than injury severity and the embedded factor relationships. Significant variables and their effects on the degree of injury are examined for earthmoving equipment using data from OSHA. Four types of equipment, backhoe, bulldozer, excavator, and scraper are included in the study. Accidents involving on-foot workers and equipment operators are investigated collectively, as well as separately. Cross tabulation analysis was conducted to establish the associations between selected categorical variables, using degree of injury as a dichotomous dependent variable (fatal vs. nonfatal) and a number of independent variables having different values. Odds ratios were calculated to determine how much a certain variable/factor increases the odds of fatality in an accident, and the odds ratios were ranked to determine the relative impact of a given factor. It was found that twelve variables were significantly associated with injury severity. Rankings based on odds ratios showed that inadequate safety training (2.54), missing equipment protective system (2.38), being a non-union worker (2.26), being an equipment operator (1.93), and being on or around inadequately maintained equipment (1.58) produced higher odds for fatality. A majority of the earthmoving equipment accidents resulted in fatality. Backhoes were the most common equipment involved in accidents and fatalities. Struck-by accidents were the most prevalent and most fatal. Non-OSHA compliant safety training, missing seatbelt, operator not using seatbelt, malfunctioning back-up alarms, and poorly maintained equipment were factors contributing to accidents and fatalities. On-foot workers experienced a higher number of accidents than operators, while fatality odds were higher for the operators. Practical applications: Safety professionals should benefit from our findings in planning and delivering training

Dynamic event tree analysis with the SAS4A/SASSYS-1 safety analysis code

DOE PAGES

Jankovsky, Zachary K.; Denman, Matthew R.; Aldemir, Tunc

2018-02-02

The consequences of a transient in an advanced sodium-cooled fast reactor are difficult to capture with the traditional approach to probabilistic risk assessment (PRA). Numerous safety-relevant systems are passive and may have operational states that cannot be represented by binary success or failure. In addition, the specific order and timing of events may be crucial which necessitates the use of dynamic PRA tools such as ADAPT. The modifications to the SAS4A/SASSYS-1 sodium-cooled fast reactor safety analysis code for linking it to ADAPT to perform a dynamic PRA are described. A test case is used to demonstrate the linking process andmore » to illustrate the type of insights that may be gained with this process. Finally, newly-developed dynamic importance measures are used to assess the significance of reactor parameters/constituents on calculated consequences of initiating events.« less

Dynamic event tree analysis with the SAS4A/SASSYS-1 safety analysis code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jankovsky, Zachary K.; Denman, Matthew R.; Aldemir, Tunc

The consequences of a transient in an advanced sodium-cooled fast reactor are difficult to capture with the traditional approach to probabilistic risk assessment (PRA). Numerous safety-relevant systems are passive and may have operational states that cannot be represented by binary success or failure. In addition, the specific order and timing of events may be crucial which necessitates the use of dynamic PRA tools such as ADAPT. The modifications to the SAS4A/SASSYS-1 sodium-cooled fast reactor safety analysis code for linking it to ADAPT to perform a dynamic PRA are described. A test case is used to demonstrate the linking process andmore » to illustrate the type of insights that may be gained with this process. Finally, newly-developed dynamic importance measures are used to assess the significance of reactor parameters/constituents on calculated consequences of initiating events.« less

A COMPARATIVE ANALYSIS BETWEEN FRANCE AND JAPAN ON LOCAL GOVERNMENTS' INVOLVEMENT IN NUCLEAR SAFETY GOVERNANCE

NASA Astrophysics Data System (ADS)

Sugawara, Shin-Etsu; Shiroyama, Hideaki

This paper shows a comparative analysis between France and Japan on the way of the local governments' involvement in nuclear safety governance through some interviews. In France, a law came into force that requires related local governments to establish "Commision Locale d'Information" (CLI), which means the local governments officially involve in nuclear regulatory activity. Meanwhile, in Japan, related local governments substantially involve in the operation of nuclear facilities through the "safety agreements" in spite of the lack of legal authority. As a result of comparative analysis, we can point out some institutional input from French cases as follows: to clarify the local governments' roles in the nuclear regulation system, to establish the official channels of communication among nuclear utilities, national regulatory authorities and local governments, and to stipulate explicitly the transparency as a purpose of safety regulation.

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

PubMed

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Identification of Behavior Based Safety by Using Traffic Light Analysis to Reduce Accidents

NASA Astrophysics Data System (ADS)

Mansur, A.; Nasution, M. I.

2016-01-01

This work present the safety assessment of a case study and describes an important area within the field production in oil and gas industry, namely behavior based safety (BBS). The company set a rigorous BBS and its intervention program that implemented and deployed continually. In this case, observers requested to have discussion and spread a number of determined questions related with work behavior to the workers during observation. Appraisal of Traffic Light Analysis (TLA) as one tools of risk assessment used to determine the estimated score of BBS questionnaire. Standardization of TLA appraisal in this study are based on Regulation of Minister of Labor and Occupational Safety and Health No:PER.05/MEN/1996. The result shown that there are some points under 84%, which categorized in yellow category and should corrected immediately by company to prevent existing bad behavior of workers. The application of BBS expected to increase the safety performance at work time-by-time and effective in reducing accidents.

Improved processes for meeting the data requirements for implementing the Highway Safety Manual (HSM) and Safety Analyst in Florida.

DOT National Transportation Integrated Search

2014-03-01

Recent research in highway safety has focused on the more advanced and statistically proven techniques of highway : safety analysis. This project focuses on the two most recent safety analysis tools, the Highway Safety Manual (HSM) : and SafetyAnalys...

Can Disproportionality Analysis of Post-marketing Case Reports be Used for Comparison of Drug Safety Profiles?

PubMed

Michel, Christiane; Scosyrev, Emil; Petrin, Michael; Schmouder, Robert

2017-05-01

Clinical trials usually do not have the power to detect rare adverse drug reactions. Spontaneous adverse reaction reports as for example available in post-marketing safety databases such as the FDA Adverse Event Reporting System (FAERS) are therefore a valuable source of information to detect new safety signals early. To screen such large data-volumes for safety signals, data-mining algorithms based on the concept of disproportionality have been developed. Because disproportionality analysis is based on spontaneous reports submitted for a large number of drugs and adverse event types, one might consider using these data to compare safety profiles across drugs. In fact, recent publications have promoted this practice, claiming to provide guidance on treatment decisions to healthcare decision makers. In this article we investigate the validity of this approach. We argue that disproportionality cannot be used for comparative drug safety analysis beyond basic hypothesis generation because measures of disproportionality are: (1) missing the incidence denominators, (2) subject to severe reporting bias, and (3) not adjusted for confounding. Hypotheses generated by disproportionality analyses must be investigated by more robust methods before they can be allowed to influence clinical decisions.

10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... assurance program will be implemented; (26) The applicant's organizational structure, allocations or... presents a safety analysis of the structures, systems, and components of the facility as a whole. The final... contain an analysis and evaluation of the major structures, systems, and components of the facility that...

76 FR 44865 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... NUCLEAR REGULATORY COMMISSION 10 CFR Part 40 RIN 3150-AI50 [NRC-2009-0079 and NRC-2011-0080] Domestic Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission. ACTION: Extension of public comment period and public meeting. SUMMARY: The U.S. Nuclear...

The Role of Probabilistic Design Analysis Methods in Safety and Affordability

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.

2016-01-01

For the last several years, NASA and its contractors have been working together to build space launch systems to commercialize space. Developing commercial affordable and safe launch systems becomes very important and requires a paradigm shift. This paradigm shift enforces the need for an integrated systems engineering environment where cost, safety, reliability, and performance need to be considered to optimize the launch system design. In such an environment, rule based and deterministic engineering design practices alone may not be sufficient to optimize margins and fault tolerance to reduce cost. As a result, introduction of Probabilistic Design Analysis (PDA) methods to support the current deterministic engineering design practices becomes a necessity to reduce cost without compromising reliability and safety. This paper discusses the importance of PDA methods in NASA's new commercial environment, their applications, and the key role they can play in designing reliable, safe, and affordable launch systems. More specifically, this paper discusses: 1) The involvement of NASA in PDA 2) Why PDA is needed 3) A PDA model structure 4) A PDA example application 5) PDA link to safety and affordability.

Choices, choices: the application of multi-criteria decision analysis to a food safety decision-making problem.

PubMed

Fazil, A; Rajic, A; Sanchez, J; McEwen, S

2008-11-01

In the food safety arena, the decision-making process can be especially difficult. Decision makers are often faced with social and fiscal pressures when attempting to identify an appropriate balance among several choices. Concurrently, policy and decision makers in microbial food safety are under increasing pressure to demonstrate that their policies and decisions are made using transparent and accountable processes. In this article, we present a multi-criteria decision analysis approach that can be used to address the problem of trying to select a food safety intervention while balancing various criteria. Criteria that are important when selecting an intervention were determined, as a result of an expert consultation, to include effectiveness, cost, weight of evidence, and practicality associated with the interventions. The multi-criteria decision analysis approach we present is able to consider these criteria and arrive at a ranking of interventions. It can also provide a clear justification for the ranking as well as demonstrate to stakeholders, through a scenario analysis approach, how to potentially converge toward common ground. While this article focuses on the problem of selecting food safety interventions, the range of applications in the food safety arena is truly diverse and can be a significant tool in assisting decisions that need to be coherent, transparent, and justifiable. Most importantly, it is a significant contributor when there is a need to strike a fine balance between various potentially competing alternatives and/or stakeholder groups.

Safety sans Frontières: An International Safety Culture Model.

PubMed

Reader, Tom W; Noort, Mark C; Shorrock, Steven; Kirwan, Barry

2015-05-01

The management of safety culture in international and culturally diverse organizations is a concern for many high-risk industries. Yet, research has primarily developed models of safety culture within Western countries, and there is a need to extend investigations of safety culture to global environments. We examined (i) whether safety culture can be reliably measured within a single industry operating across different cultural environments, and (ii) if there is an association between safety culture and national culture. The psychometric properties of a safety culture model developed for the air traffic management (ATM) industry were examined in 17 European countries from four culturally distinct regions of Europe (North, East, South, West). Participants were ATM operational staff (n = 5,176) and management staff (n = 1,230). Through employing multigroup confirmatory factor analysis, good psychometric properties of the model were established. This demonstrates, for the first time, that when safety culture models are tailored to a specific industry, they can operate consistently across national boundaries and occupational groups. Additionally, safety culture scores at both regional and national levels were associated with country-level data on Hofstede's five national culture dimensions (collectivism, power distance, uncertainty avoidance, masculinity, and long-term orientation). MANOVAs indicated safety culture to be most positive in Northern Europe, less so in Western and Eastern Europe, and least positive in Southern Europe. This indicates that national cultural traits may influence the development of organizational safety culture, with significant implications for safety culture theory and practice. © 2015 Society for Risk Analysis.

Analysis of vehicle's safety envelope under car-following model

NASA Astrophysics Data System (ADS)

Tang, Tie-Qiao; Zhang, Jian; Chen, Liang; Shang, Hua-Yan

2017-05-01

In this paper, we propose an improved car-following model to explore the impacts of vehicle's two safety distances (i.e., the front safety distance and back safety distance) on the traffic safety during the starting process. The numerical results show that our model is prominently safer than the FVD (full velocity difference) model, i.e., our model is better than the FVD model from the perspective of the traffic safety, which shows that each driver should consider his two safety distances during his driving process.

The use of experimental data in an MTR-type nuclear reactor safety analysis

NASA Astrophysics Data System (ADS)

Day, Simon E.

Reactivity initiated accidents (RIAs) are a category of events required for research reactor safety analysis. A subset of this is unprotected RIAs in which mechanical systems or human intervention are not credited in the response of the system. Light-water cooled and moderated MTR-type ( i.e., aluminum-clad uranium plate fuel) reactors are self-limiting up to some reactivity insertion limit beyond which fuel damage occurs. This characteristic was studied in the Borax and Spert reactor tests of the 1950s and 1960s in the USA. This thesis considers the use of this experimental data in generic MTR-type reactor safety analysis. The approach presented herein is based on fundamental phenomenological understanding and uses correlations in the reactor test data with suitable account taken for differences in important system parameters. Specifically, a semi-empirical approach is used to quantify the relationship between the power, energy and temperature rise response of the system as well as parametric dependencies on void coefficient and the degree of subcooling. Secondary effects including the dependence on coolant flow are also examined. A rigorous curve fitting approach and error assessment is used to quantify the trends in the experimental data. In addition to the initial power burst stage of an unprotected transient, the longer term stability of the system is considered with a stylized treatment of characteristic power/temperature oscillations (chugging). A bridge from the HEU-based experimental data to the LEU fuel cycle is assessed and outlined based on existing simulation results presented in the literature. A cell-model based parametric study is included. The results are used to construct a practical safety analysis methodology for determining reactivity insertion safety limits for a light-water moderated and cooled MTR-type core.

Towards a Fuzzy Bayesian Network Based Approach for Safety Risk Analysis of Tunnel-Induced Pipeline Damage.

PubMed

Zhang, Limao; Wu, Xianguo; Qin, Yawei; Skibniewski, Miroslaw J; Liu, Wenli

2016-02-01

Tunneling excavation is bound to produce significant disturbances to surrounding environments, and the tunnel-induced damage to adjacent underground buried pipelines is of considerable importance for geotechnical practice. A fuzzy Bayesian networks (FBNs) based approach for safety risk analysis is developed in this article with detailed step-by-step procedures, consisting of risk mechanism analysis, the FBN model establishment, fuzzification, FBN-based inference, defuzzification, and decision making. In accordance with the failure mechanism analysis, a tunnel-induced pipeline damage model is proposed to reveal the cause-effect relationships between the pipeline damage and its influential variables. In terms of the fuzzification process, an expert confidence indicator is proposed to reveal the reliability of the data when determining the fuzzy probability of occurrence of basic events, with both the judgment ability level and the subjectivity reliability level taken into account. By means of the fuzzy Bayesian inference, the approach proposed in this article is capable of calculating the probability distribution of potential safety risks and identifying the most likely potential causes of accidents under both prior knowledge and given evidence circumstances. A case concerning the safety analysis of underground buried pipelines adjacent to the construction of the Wuhan Yangtze River Tunnel is presented. The results demonstrate the feasibility of the proposed FBN approach and its application potential. The proposed approach can be used as a decision tool to provide support for safety assurance and management in tunnel construction, and thus increase the likelihood of a successful project in a complex project environment. © 2015 Society for Risk Analysis.

Final report of the addendum to the safety assessment of n-butyl alcohol as used in cosmetics.

PubMed

McLain, Valerie C

2008-01-01

nonimmunological contact urticaria was negative in 105 subjects. Repeat-insult patch test (RIPT) studies of nail colors and enamels containing 3% n-Butyl Alcohol in one study produced reactions on challenge, but further study linked significant positive reactions to another solvent. In other RIPT studies, only minimal reactions were reported. A photopatch test demonstrated that a nail enamel containing 3% n-Butyl Alcohol resulted in no reactions. Workers complained of ocular irritation, disagreeable odor, slight headache and vertigo, slight irritation of nose and throat, and dermatitis of the fingers and hands when the air concentration of n-Butyl Alcohol was greater than 50 ppm, as compared to an odor threshold in air of 0.83 ppm. The available safety test data were considered adequate to support the safety of n-Butyl Alcohol in all cosmetic product categories in which it is currently used.

Analysis of governmental Web sites on food safety issues: a global perspective.

PubMed

Namkung, Young; Almanza, Barbara A

2006-10-01

Despite a growing concern over food safety issues, as well as a growing dependence on the Internet as a source of information, little research has been done to examine the presence and relevance of food safety-related information on Web sites. The study reported here conducted Web site analysis in order to examine the current operational status of governmental Web sites on food safety issues. The study also evaluated Web site usability, especially information dimensionalities such as utility, currency, and relevance of content, from the perspective of the English-speaking consumer. Results showed that out of 192 World Health Organization members, 111 countries operated governmental Web sites that provide information about food safety issues. Among 171 searchable Web sites from the 111 countries, 123 Web sites (71.9 percent) were accessible, and 81 of those 123 (65.9 percent) were available in English. The majority of Web sites offered search engine tools and related links for more information, but their availability and utility was limited. In terms of content, 69.9 percent of Web sites offered information on foodborne-disease outbreaks, compared with 31.5 percent that had travel- and health-related information.

The Range Safety Debris Catalog Analysis in Preparation for the Pad Abort One Flight Test

NASA Technical Reports Server (NTRS)

Kutty, Prasad M.; Pratt, William D.

2010-01-01

The Pad Abort One flight test of the Orion Abort Flight Test Program is currently under development with the goal of demonstrating the capability of the Launch Abort System. In the event of a launch failure, this system will propel the Crew Exploration Vehicle to safety. An essential component of this flight test is range safety, which ensures the security of range assets and personnel. A debris catalog analysis was done as part of a range safety data package delivered to the White Sands Missile Range in New Mexico where the test will be conducted. The analysis discusses the consequences of an overpressurization of the Abort Motor. The resulting structural failure was assumed to create a debris field of vehicle fragments that could potentially pose a hazard to the range. A statistical model was used to assemble the debris catalog of potential propellant fragments. Then, a thermodynamic, energy balance model was applied to the system in order to determine the imparted velocity to these propellant fragments. This analysis was conducted at four points along the flight trajectory to better understand the failure consequences over the entire flight. The methods used to perform this analysis are outlined in detail and the corresponding results are presented and discussed.

Too much information? A document analysis of sport safety resources from key organisations

PubMed Central

Finch, Caroline F

2016-01-01

Objectives The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Design Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. Setting This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. Participants The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. Results The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. Conclusions People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based

Systemic safety project selection tool.

DOT National Transportation Integrated Search

2013-07-01

"The Systemic Safety Project Selection Tool presents a process for incorporating systemic safety planning into traditional safety management processes. The Systemic Tool provides a step-by-step process for conducting systemic safety analysis; conside...

Applying Qualitative Hazard Analysis to Support Quantitative Safety Analysis for Proposed Reduced Wake Separation Conops

NASA Technical Reports Server (NTRS)

Shortle, John F.; Allocco, Michael

2005-01-01

This paper describes a scenario-driven hazard analysis process to identify, eliminate, and control safety-related risks. Within this process, we develop selective criteria to determine the applicability of applying engineering modeling to hypothesized hazard scenarios. This provides a basis for evaluating and prioritizing the scenarios as candidates for further quantitative analysis. We have applied this methodology to proposed concepts of operations for reduced wake separation for closely spaced parallel runways. For arrivals, the process identified 43 core hazard scenarios. Of these, we classified 12 as appropriate for further quantitative modeling, 24 that should be mitigated through controls, recommendations, and / or procedures (that is, scenarios not appropriate for quantitative modeling), and 7 that have the lowest priority for further analysis.

Why the Eurocontrol Safety Regulation Commission Policy on Safety Nets and Risk Assessment is Wrong

NASA Astrophysics Data System (ADS)

Brooker, Peter

2004-05-01

Current Eurocontrol Safety Regulation Commission (SRC) policy says that the Air Traffic Management (ATM) system (including safety minima) must be demonstrated through risk assessments to meet the Target Level of Safety (TLS) without needing to take safety nets (such as Short Term Conflict Alert) into account. This policy is wrong. The policy is invalid because it does not build rationally and consistently from ATM's firm foundations of TLS and hazard analysis. The policy is bad because it would tend to retard safety improvements. Safety net policy must rest on a clear and rational treatment of integrated ATM system safety defences. A new safety net policy, appropriate to safe ATM system improvements, is needed, which recognizes that safety nets are an integrated part of ATM system defences. The effects of safety nets in reducing deaths from mid-air collisions should be fully included in hazard analysis and safety audits in the context of the TLS for total system design.

Road safety risk evaluation and target setting using data envelopment analysis and its extensions.

PubMed

Shen, Yongjun; Hermans, Elke; Brijs, Tom; Wets, Geert; Vanhoof, Koen

2012-09-01

Currently, comparison between countries in terms of their road safety performance is widely conducted in order to better understand one's own safety situation and to learn from those best-performing countries by indicating practical targets and formulating action programmes. In this respect, crash data such as the number of road fatalities and casualties are mostly investigated. However, the absolute numbers are not directly comparable between countries. Therefore, the concept of risk, which is defined as the ratio of road safety outcomes and some measure of exposure (e.g., the population size, the number of registered vehicles, or distance travelled), is often used in the context of benchmarking. Nevertheless, these risk indicators are not consistent in most cases. In other words, countries may have different evaluation results or ranking positions using different exposure information. In this study, data envelopment analysis (DEA) as a performance measurement technique is investigated to provide an overall perspective on a country's road safety situation, and further assess whether the road safety outcomes registered in a country correspond to the numbers that can be expected based on the level of exposure. In doing so, three model extensions are considered, which are the DEA based road safety model (DEA-RS), the cross-efficiency method, and the categorical DEA model. Using the measures of exposure to risk as the model's input and the number of road fatalities as output, an overall road safety efficiency score is computed for the 27 European Union (EU) countries based on the DEA-RS model, and the ranking of countries in accordance with their cross-efficiency scores is evaluated. Furthermore, after applying clustering analysis to group countries with inherent similarity in their practices, the categorical DEA-RS model is adopted to identify best-performing and underperforming countries in each cluster, as well as the reference sets or benchmarks for those

Demand Response Potential for California SubLAPs and Local Capacity Planning Areas: An Addendum to the 2025 California Demand Response Potential Study – Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alstone, Peter; Potter, Jennifer; Piette, Mary Ann

The 2025 California Demand Response Potential Study Phase 2 Report1 was released on March 1, 2017, and described a range of pathways for Demand Response (DR) to support a clean, stable, and cost-effective electric grid for California. One of the Report’s key findings was that while there appears to be very low future value for untargeted DR Shed aimed at system-wide peak load conditions, there could be significant value for locally focused Shed resources. Although the dynamics of renewable capacity expansion have reduced the pressure to build new thermal generation in general, there are still transmission-constrained areas of the statemore » where load growth needs to be managed with the addition of new local capacity, which could include DERs and/or DR. This Addendum to the Phase 2 Report presents a breakdown of the expected future “Local Shed” DR potential at a finer geographic resolution than what is available in the original report, with results summarized by SubLAP and Local Capacity Area (LCA).« less

Safety and Convergence Analysis of Intersecting Aircraft Flows Under Decentralized Collision Avoidance

NASA Astrophysics Data System (ADS)

Dallal, Ahmed H.

Safety is an essential requirement for air traffic management and control systems. Aircraft are not allowed to get closer to each other than a specified safety distance, to avoid any conflicts and collisions between aircraft. Forecast analysis predicts a tremendous increase in the number of flights. Subsequently, automated tools are needed to help air traffic controllers resolve air born conflicts. In this dissertation, we consider the problem of conflict resolution of aircraft flows with the assumption that aircraft are flowing through a fixed specified control volume at a constant speed. In this regard, several centralized and decentralized resolution rules have been proposed for path planning and conflict avoidance. For the case of two intersecting flows, we introduce the concept of conflict touches, and a collaborative decentralized conflict resolution rule is then proposed and analyzed for two intersecting flows. The proposed rule is also able to resolved airborne conflicts that resulted from resolving another conflict via the domino effect. We study the safety conditions under the proposed conflict resolution and collision avoidance rule. Then, we use Lyapunov analysis to analytically prove the convergence of conflict resolution dynamics under the proposed rule. The analysis show that, under the proposed conflict resolution rule, the system of intersecting aircraft flows is guaranteed to converge to safe, conflict free, trajectories within a bounded time. Simulations are provided to verify the analytically derived conclusions and study the convergence of the conflict resolution dynamics at different encounter angles. Simulation results show that lateral deviations taken by aircraft in each flow, to resolve conflicts, are bounded, and aircraft converged to safe and conflict free trajectories, within a finite time.

Integrated risk assessment and screening analysis of drinking water safety of a conventional water supply system.

PubMed

Sun, F; Chen, J; Tong, Q; Zeng, S

2007-01-01

Management of drinking water safety is changing towards an integrated risk assessment and risk management approach that includes all processes in a water supply system from catchment to consumers. However, given the large number of water supply systems in China and the cost of implementing such a risk assessment procedure, there is a necessity to first conduct a strategic screening analysis at a national level. An integrated methodology of risk assessment and screening analysis is thus proposed to evaluate drinking water safety of a conventional water supply system. The violation probability, indicating drinking water safety, is estimated at different locations of a water supply system in terms of permanganate index, ammonia nitrogen, turbidity, residual chlorine and trihalomethanes. Critical parameters with respect to drinking water safety are then identified, based on which an index system is developed to prioritize conventional water supply systems in implementing a detailed risk assessment procedure. The evaluation results are represented as graphic check matrices for the concerned hazards in drinking water, from which the vulnerability of a conventional water supply system is characterized.

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conclusion of each failure investigation of an item relied on for safety or management measure. (b) Process... methodology being used. (3) Requirements for existing licensees. Individuals holding an NRC license on...

Archetypes for Organisational Safety

NASA Technical Reports Server (NTRS)

Marais, Karen; Leveson, Nancy G.

2003-01-01

We propose a framework using system dynamics to model the dynamic behavior of organizations in accident analysis. Most current accident analysis techniques are event-based and do not adequately capture the dynamic complexity and non-linear interactions that characterize accidents in complex systems. In this paper we propose a set of system safety archetypes that model common safety culture flaws in organizations, i.e., the dynamic behaviour of organizations that often leads to accidents. As accident analysis and investigation tools, the archetypes can be used to develop dynamic models that describe the systemic and organizational factors contributing to the accident. The archetypes help clarify why safety-related decisions do not always result in the desired behavior, and how independent decisions in different parts of the organization can combine to impact safety.

Integrating natural language processing expertise with patient safety event review committees to improve the analysis of medication events.

PubMed

Fong, Allan; Harriott, Nicole; Walters, Donna M; Foley, Hanan; Morrissey, Richard; Ratwani, Raj R

2017-08-01

Many healthcare providers have implemented patient safety event reporting systems to better understand and improve patient safety. Reviewing and analyzing these reports is often time consuming and resource intensive because of both the quantity of reports and length of free-text descriptions in the reports. Natural language processing (NLP) experts collaborated with clinical experts on a patient safety committee to assist in the identification and analysis of medication related patient safety events. Different NLP algorithmic approaches were developed to identify four types of medication related patient safety events and the models were compared. Well performing NLP models were generated to categorize medication related events into pharmacy delivery delays, dispensing errors, Pyxis discrepancies, and prescriber errors with receiver operating characteristic areas under the curve of 0.96, 0.87, 0.96, and 0.81 respectively. We also found that modeling the brief without the resolution text generally improved model performance. These models were integrated into a dashboard visualization to support the patient safety committee review process. We demonstrate the capabilities of various NLP models and the use of two text inclusion strategies at categorizing medication related patient safety events. The NLP models and visualization could be used to improve the efficiency of patient safety event data review and analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors.

PubMed

Mohammadi, A; Hassanzadeh, M; Gharib, M

2016-02-01

In this study, shielding calculation and criticality safety analysis were carried out for general material testing reactor (MTR) research reactors interim storage and relevant transportation cask. During these processes, three major terms were considered: source term, shielding, and criticality calculations. The Monte Carlo transport code MCNP5 was used for shielding calculation and criticality safety analysis and ORIGEN2.1 code for source term calculation. According to the results obtained, a cylindrical cask with body, top, and bottom thicknesses of 18, 13, and 13 cm, respectively, was accepted as the dual-purpose cask. Furthermore, it is shown that the total dose rates are below the normal transport criteria that meet the standards specified. Copyright © 2015 Elsevier Ltd. All rights reserved.

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

PubMed

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

Bayesian road safety analysis: incorporation of past evidence and effect of hyper-prior choice.

PubMed

Miranda-Moreno, Luis F; Heydari, Shahram; Lord, Dominique; Fu, Liping

2013-09-01

This paper aims to address two related issues when applying hierarchical Bayesian models for road safety analysis, namely: (a) how to incorporate available information from previous studies or past experiences in the (hyper) prior distributions for model parameters and (b) what are the potential benefits of incorporating past evidence on the results of a road safety analysis when working with scarce accident data (i.e., when calibrating models with crash datasets characterized by a very low average number of accidents and a small number of sites). A simulation framework was developed to evaluate the performance of alternative hyper-priors including informative and non-informative Gamma, Pareto, as well as Uniform distributions. Based on this simulation framework, different data scenarios (i.e., number of observations and years of data) were defined and tested using crash data collected at 3-legged rural intersections in California and crash data collected for rural 4-lane highway segments in Texas. This study shows how the accuracy of model parameter estimates (inverse dispersion parameter) is considerably improved when incorporating past evidence, in particular when working with the small number of observations and crash data with low mean. The results also illustrates that when the sample size (more than 100 sites) and the number of years of crash data is relatively large, neither the incorporation of past experience nor the choice of the hyper-prior distribution may affect the final results of a traffic safety analysis. As a potential solution to the problem of low sample mean and small sample size, this paper suggests some practical guidance on how to incorporate past evidence into informative hyper-priors. By combining evidence from past studies and data available, the model parameter estimates can significantly be improved. The effect of prior choice seems to be less important on the hotspot identification. The results show the benefits of incorporating prior

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the Atmospheric Environment Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This study analyzed aircraft incidents in the NASA Aviation Safety Reporting System (ASRS) that apply to two of the three technical challenges (TCs) in NASA's Aviation Safety Program's Atmospheric Environment Safety Technology Project. The aircraft incidents are related to airframe icing and atmospheric hazards TCs. The study reviewed incidents that listed their primary problem as weather or environment-nonweather between 1994 and 2011 for aircraft defined by Federal Aviation Regulations (FAR) Parts 121, 135, and 91. The study investigated the phases of flight, a variety of anomalies, flight conditions, and incidents by FAR part, along with other categories. The first part of the analysis focused on airframe-icing-related incidents and found 275 incidents out of 3526 weather-related incidents over the 18-yr period. The second portion of the study focused on atmospheric hazards and found 4647 incidents over the same time period. Atmospheric hazards-related incidents included a range of conditions from clear air turbulence and wake vortex, to controlled flight toward terrain, ground encounters, and incursions.

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

The relationship between organizational leadership for safety and learning from patient safety events.

PubMed

Ginsburg, Liane R; Chuang, You-Ta; Berta, Whitney Blair; Norton, Peter G; Ng, Peggy; Tregunno, Deborah; Richardson, Julia

2010-06-01

To examine the relationship between organizational leadership for patient safety and five types of learning from patient safety events (PSEs). Forty-nine general acute care hospitals in Ontario, Canada. A nonexperimental design using cross-sectional surveys of hospital patient safety officers (PSOs) and patient care managers (PCMs). PSOs provided data on organization-level learning from (a) minor events, (b) moderate events, (c) major near misses, (d) major event analysis, and (e) major event dissemination/communication. PCMs provided data on organizational leadership (formal and informal) for patient safety. Hospitals were the unit of analysis. Seemingly unrelated regression was used to examine the influence of formal and informal leadership for safety on the five types of learning from PSEs. The interaction between leadership and hospital size was also examined. Formal organizational leadership for patient safety is an important predictor of learning from minor, moderate, and major near-miss events, and major event dissemination. This relationship is significantly stronger for small hospitals (<100 beds). We find support for the relationship between patient safety leadership and patient safety behaviors such as learning from safety events. Formal leadership support for safety is of particular importance in small organizations where the economic burden of safety programs is disproportionately large and formal leadership is closer to the front lines.

Patient Safety Culture Survey in Pediatric Complex Care Settings: A Factor Analysis.

PubMed

Hessels, Amanda J; Murray, Meghan; Cohen, Bevin; Larson, Elaine L

2017-04-19

Children with complex medical needs are increasing in number and demanding the services of pediatric long-term care facilities (pLTC), which require a focus on patient safety culture (PSC). However, no tool to measure PSC has been tested in this unique hybrid acute care-residential setting. The objective of this study was to evaluate the psychometric properties of the Nursing Home Survey on Patient Safety Culture tool slightly modified for use in the pLTC setting. Factor analyses were performed on data collected from 239 staff at 3 pLTC in 2012. Items were screened by principal axis factoring, and the original structure was tested using confirmatory factor analysis. Exploratory factor analysis was conducted to identify the best model fit for the pLTC data, and factor reliability was assessed by Cronbach alpha. The extracted, rotated factor solution suggested items in 4 (staffing, nonpunitive response to mistakes, communication openness, and organizational learning) of the original 12 dimensions may not be a good fit for this population. Nevertheless, in the pLTC setting, both the original and the modified factor solutions demonstrated similar reliabilities to the published consistencies of the survey when tested in adult nursing homes and the items factored nearly identically as theorized. This study demonstrates that the Nursing Home Survey on Patient Safety Culture with minimal modification may be an appropriate instrument to measure PSC in pLTC settings. Additional psychometric testing is recommended to further validate the use of this instrument in this setting, including examining the relationship to safety outcomes. Increased use will yield data for benchmarking purposes across these specialized settings to inform frontline workers and organizational leaders of areas of strength and opportunity for improvement.

Nursing practice environment, job outcomes and safety climate: a structural equation modelling analysis.

PubMed

Dos Santos Alves, Daniela Fernanda; da Silva, Dirceu; de Brito Guirardello, Edinêis

2017-01-01

To assess correlations between the characteristics of the nursing practice environment, job outcomes and safety climate. The nursing practice environment is critical to the well-being of professionals and to patient safety, as highlighted by national and international studies; however, there is a lack of evidence regarding this theme in paediatric units. A cross-sectional study, in two paediatric hospitals in Brazil, was conducted from December 2013 to February 2014. For data collection, we used the Nursing Work Index - Revised, Safety Attitudes Questionnaire - Short Form 2006 and the Maslach Burnout Inventory, and for analysis Spearman's correlation coefficient and structural equation modelling were used. Two hundred and sixty-seven professional nurses participated in the study. Autonomy, control over the work environment and the relationship between nursing and medical staff are factors associated with job outcomes and safety climate and can be considered their predictors. Professional nurses with greater autonomy, good working relationships and control over their work environment have lower levels of emotional exhaustion, higher job satisfaction, less intention of leaving the job and the safety climate is positive. Initiatives to improve the professional practice environment can improve the safety of paediatric patients and the well-being of professional nurses. © 2016 John Wiley & Sons Ltd.

Preliminary safety analysis of the Baita Bihor radioactive waste repository, Romania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Little, Richard; Bond, Alex; Watson, Sarah

2007-07-01

A project funded under the European Commission's Phare Programme 2002 has undertaken an in-depth analysis of the operational and post-closure safety of the Baita Bihor repository. The repository has accepted low- and some intermediate-level radioactive waste from industry, medical establishments and research activities since 1985 and the current estimate is that disposals might continue for around another 20 to 35 years. The analysis of the operational and post-closure safety of the Baita Bihor repository was carried out in two iterations, with the second iteration resulting in reduced uncertainties, largely as a result taking into account new information on the hydrologymore » and hydrogeology of the area, collected as part of the project. Impacts were evaluated for the maximum potential inventory that might be available for disposal to Baita Bihor for a number of operational and postclosure scenarios and associated conceptual models. The results showed that calculated impacts were below the relevant regulatory criteria. In light of the assessment, a number of recommendations relating to repository operation, optimisation of repository engineering and waste disposals, and environmental monitoring were made. (authors)« less

Evaluating the safety risk of roadside features for rural two-lane roads using reliability analysis.

PubMed

Jalayer, Mohammad; Zhou, Huaguo

2016-08-01

The severity of roadway departure crashes mainly depends on the roadside features, including the sideslope, fixed-object density, offset from fixed objects, and shoulder width. Common engineering countermeasures to improve roadside safety include: cross section improvements, hazard removal or modification, and delineation. It is not always feasible to maintain an object-free and smooth roadside clear zone as recommended in design guidelines. Currently, clear zone width and sideslope are used to determine roadside hazard ratings (RHRs) to quantify the roadside safety of rural two-lane roadways on a seven-point pictorial scale. Since these two variables are continuous and can be treated as random, probabilistic analysis can be applied as an alternative method to address existing uncertainties. Specifically, using reliability analysis, it is possible to quantify roadside safety levels by treating the clear zone width and sideslope as two continuous, rather than discrete, variables. The objective of this manuscript is to present a new approach for defining the reliability index for measuring roadside safety on rural two-lane roads. To evaluate the proposed approach, we gathered five years (2009-2013) of Illinois run-off-road (ROR) crash data and identified the roadside features (i.e., clear zone widths and sideslopes) of 4500 300ft roadway segments. Based on the obtained results, we confirm that reliability indices can serve as indicators to gauge safety levels, such that the greater the reliability index value, the lower the ROR crash rate. Copyright © 2016 Elsevier Ltd. All rights reserved.

Georgia Highway Safety 1997 fact book : a report on highway safety In Georgia

DOT National Transportation Integrated Search

1997-01-01

The goal of this fact book is to present highway safety statistics and fact-based analysis that will increase public awareness on highway safety issues, and to provide information that will assist policy makers and highway safety advocates in making ...

SCAP: a new methodology for safety management based on feedback from credible accident-probabilistic fault tree analysis system.

PubMed

Khan, F I; Iqbal, A; Ramesh, N; Abbasi, S A

2001-10-12

As it is conventionally done, strategies for incorporating accident--prevention measures in any hazardous chemical process industry are developed on the basis of input from risk assessment. However, the two steps-- risk assessment and hazard reduction (or safety) measures--are not linked interactively in the existing methodologies. This prevents a quantitative assessment of the impacts of safety measures on risk control. We have made an attempt to develop a methodology in which risk assessment steps are interactively linked with implementation of safety measures. The resultant system tells us the extent of reduction of risk by each successive safety measure. It also tells based on sophisticated maximum credible accident analysis (MCAA) and probabilistic fault tree analysis (PFTA) whether a given unit can ever be made 'safe'. The application of the methodology has been illustrated with a case study.

Safety huddles to proactively identify and address electronic health record safety

PubMed Central

Menon, Shailaja; Singh, Hardeep; Giardina, Traber D; Rayburn, William L; Davis, Brenda P; Russo, Elise M

2017-01-01

Objective: Methods to identify and study safety risks of electronic health records (EHRs) are underdeveloped and largely depend on limited end-user reports. “Safety huddles” have been found useful in creating a sense of collective situational awareness that increases an organization’s capacity to respond to safety concerns. We explored the use of safety huddles for identifying and learning about EHR-related safety concerns. Design: Data were obtained from daily safety huddle briefing notes recorded at a single midsized tertiary-care hospital in the United States over 1 year. Huddles were attended by key administrative, clinical, and information technology staff. We conducted a content analysis of huddle notes to identify what EHR-related safety concerns were discussed. We expanded a previously developed EHR-related error taxonomy to categorize types of EHR-related safety concerns recorded in the notes. Results: On review of daily huddle notes spanning 249 days, we identified 245 EHR-related safety concerns. For our analysis, we defined EHR technology to include a specific EHR functionality, an entire clinical software application, or the hardware system. Most concerns (41.6%) involved “EHR technology working incorrectly,” followed by 25.7% involving “EHR technology not working at all.” Concerns related to “EHR technology missing or absent” accounted for 16.7%, whereas 15.9% were linked to “user errors.” Conclusions: Safety huddles promoted discussion of several technology-related issues at the organization level and can serve as a promising technique to identify and address EHR-related safety concerns. Based on our findings, we recommend that health care organizations consider huddles as a strategy to promote understanding and improvement of EHR safety. PMID:28031286

An integrated analysis of liver safety data from orlistat clinical trials.

PubMed

Morris, Marc; Lane, Peter; Lee, Kwan; Parks, Daniel

2012-01-01

Orlistat is an oral gastrointestinal lipase inhibitor and is indicated for treatment of obesity in combination with a hypocaloric diet. Post-marketing reports of adverse reactions revealed hints for possible drug-induced liver injury which has prompted changes to the product information. Orlistat's development program, involving over 30,000 patients, did not indicate a hepatic safety issue. We analyzed liver function test data from randomized clinical trials of orlistat, using i) meta-analysis of published study safety data, ii) time-to-event analysis for individual patients, and iii) a novel and more sensitive method derived from the U.S. Food and Drug Administration's (FDA) evaluation of drug-induced serious hepatotoxicity (eDISH) technique. Over 10,000 subjects were included. The combined odds ratio from a simple summary-level fixed-effects meta-analysis of treatment-emergent abnormalities in serum alanine aminotransferase (ALT) (defined as greater than the upper level of normal for 2 successive measurements) was 1.09 (95% CI 0.93-1.28), and in total bilirubin 1.24 (95% CI 1.03-1.49). Part of the small apparent effect was due to longer exposure to orlistat than to placebo, on average. A patient-level display, adjusting for regression towards the mean, and Kaplan-Meier analysis of changes in ALT and bilirubin, taking account of different exposure, showed no significant difference between orlistat and placebo. This shows that there is no signal for hepatic damage in clinical studies of orlistat. While idiosyncratic liver injury following exposure to orlistat cannot be excluded, it is likely to be extremely rare.

An Analysis of Laboratory Safety in Texas.

ERIC Educational Resources Information Center

Fuller, Edward J.; Picucci, Ali Callicoatte; Collins, James W.; Swann, Philip

This paper reports on a survey to discover the types of laboratory accidents that occur in Texas public schools, the factors associated with such accidents, and the practices of schools with regard to current laboratory safety requirements. The purpose of the survey is to better understand safety conditions in Texas public schools and to help…

Safety and reliability analysis in a polyvinyl chloride batch process using dynamic simulator-case study: Loss of containment incident.

PubMed

Rizal, Datu; Tani, Shinichi; Nishiyama, Kimitoshi; Suzuki, Kazuhiko

2006-10-11

In this paper, a novel methodology in batch plant safety and reliability analysis is proposed using a dynamic simulator. A batch process involving several safety objects (e.g. sensors, controller, valves, etc.) is activated during the operational stage. The performance of the safety objects is evaluated by the dynamic simulation and a fault propagation model is generated. By using the fault propagation model, an improved fault tree analysis (FTA) method using switching signal mode (SSM) is developed for estimating the probability of failures. The timely dependent failures can be considered as unavailability of safety objects that can cause the accidents in a plant. Finally, the rank of safety object is formulated as performance index (PI) and can be estimated using the importance measures. PI shows the prioritization of safety objects that should be investigated for safety improvement program in the plants. The output of this method can be used for optimal policy in safety object improvement and maintenance. The dynamic simulator was constructed using Visual Modeler (VM, the plant simulator, developed by Omega Simulation Corp., Japan). A case study is focused on the loss of containment (LOC) incident at polyvinyl chloride (PVC) batch process which is consumed the hazardous material, vinyl chloride monomer (VCM).

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2013 CFR

2013-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2012 CFR

2012-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2010 CFR

2010-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2014 CFR

2014-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

Transportation safety data and analysis : Volume 1, Analyzing the effectiveness of safety measures using Bayesian methods.

DOT National Transportation Integrated Search

2010-12-01

Recent research suggests that traditional safety evaluation methods may be inadequate in accurately determining the effectiveness of roadway safety measures. In recent years, advanced statistical methods are being utilized in traffic safety studies t...

An object-oriented approach to risk and reliability analysis : methodology and aviation safety applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dandini, Vincent John; Duran, Felicia Angelica; Wyss, Gregory Dane

2003-09-01

This article describes how features of event tree analysis and Monte Carlo-based discrete event simulation can be combined with concepts from object-oriented analysis to develop a new risk assessment methodology, with some of the best features of each. The resultant object-based event scenario tree (OBEST) methodology enables an analyst to rapidly construct realistic models for scenarios for which an a priori discovery of event ordering is either cumbersome or impossible. Each scenario produced by OBEST is automatically associated with a likelihood estimate because probabilistic branching is integral to the object model definition. The OBEST methodology is then applied to anmore » aviation safety problem that considers mechanisms by which an aircraft might become involved in a runway incursion incident. The resulting OBEST model demonstrates how a close link between human reliability analysis and probabilistic risk assessment methods can provide important insights into aviation safety phenomenology.« less

The carrier safety measurement system (CSMS) effectiveness test by behavior analysis and safety improvement categories (BASICs)

DOT National Transportation Integrated Search

2014-01-24

The Carrier Safety Measurement System (CSMS) is the Federal Motor Carrier Safety Administrations (FMCSA's) workload prioritization tool. This tool is used to identify carriers with potential safety issues so that they are subject to interventions ...

Safety climate and attitude as evaluation measures of organizational safety.

PubMed

Isla Díaz, R; Díaz Cabrera, D

1997-09-01

The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.

Too much information? A document analysis of sport safety resources from key organisations.

PubMed

Bekker, Sheree; Finch, Caroline F

2016-05-06

The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based, fully up to date or even effective in supporting sport

Predicting safety culture: the roles of employer, operations manager and safety professional.

PubMed

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Understanding of safety monitoring in clinical trials by individuals with CF or their parents: A qualitative analysis.

PubMed

Kern-Goldberger, Andrew S; Hessels, Amanda J; Saiman, Lisa; Quittell, Lynne M

2018-03-14

Recruiting both pediatric and adult participants for clinical trials in CF is currently of paramount importance as numerous new therapies are being developed. However, recruitment is challenging as parents of children with CF and adults with CF cite safety concerns as a principal barrier to enrollment. In conjunction with the CF Foundation (CFF) Data Safety Monitoring Board (DSMB), a pilot brochure was developed to inform patients and parents of the multiple levels of safety monitoring; the CFF simultaneously created an infographic representing the safety monitoring process. This study explores the attitudes and beliefs of CF patients and families regarding safety monitoring and clinical trial participation, and elicits feedback regarding the educational materials. Semi-structured interviews were conducted using a pre-tested interview guide and audio-recorded during routine CF clinic visits. Participants included 5 parents of children with CF <16years old; 5 adolescents and young adults with CF 16-21years old; and 5 adults with CF ≥22years old from pediatric and adult CF centers. The study team performed systematic text condensation analysis of the recorded interviews using an iterative process. Four major thematic categories with subthemes emerged as supported by exemplar quotations: attitudes toward clinical trials, safety values, conceptualizing the safety monitoring process, and priorities for delivery of patient education. Participant feedback was used to revise the pilot brochure; text was shortened, unfamiliar words clarified (e.g., "pipeline"), abbreviations eliminated, and redundancy avoided. Qualitative analysis of CF patient and family interviews provided insights into barriers to participation in clinical trials, safety concerns, perspectives on safety monitoring and educational priorities. We plan a multicenter study to determine if the revised brochure reduces knowledge, attitude and practice barriers regarding participation in CF clinical trials

Efficacy and Safety of Oral Beclomethasone Dipropionate in Ulcerative Colitis: A Systematic Review and Meta-Analysis.

PubMed

Manguso, Francesco; Bennato, Raffaele; Lombardi, Giovanni; Riccio, Elisabetta; Costantino, Giuseppe; Fries, Walter

2016-01-01

We performed a systematic review and meta-analysis of all the available evidence comparing efficacy and safety of oral prolonged released beclomethasone dipropionate (BDP) to active oral controls in patients with mild-to-moderate ulcerative colitis (UC). A subgroup-analysis compared the effectiveness of BDP and 5-ASA. Literature research was performed in different databases, as well as manual search to identify abstracts from international meetings with data not included in extensive publications. Experts in the field and companies involved in BDP development and manufacture were contacted to identify unpublished studies used for registration purposes. Dichotomous data were pooled to obtain odds ratio meta-analysis. Five randomized controlled trials that compared oral BDP 5mg/day vs. all oral active controls in treating UC were identified as eligible. Efficacy and safety have been addressed after 4-week treatment period. One study evaluated efficacy and safety of BDP vs. prednisone and 4 of BDP vs. 5-ASA. Treatment with oral BDP 5 mg/day induces a significant better clinical response compared to oral 5-ASA (OR 1.86, 95% CI = 1.23-2.82, P = 0.003). The effect is detectable even when the comparison to prednisone is added (OR 1.41, 95% CI = 1.03-1.93, P = 0.03). Data on remission indicate that the potential clinical efficacy of BDP may be better than 5-ASA (OR 1.55, 95% CI = 1.00-2.40, P = 0.05). This difference is lost when the comparison with prednisone is added (OR 1.30, 95% CI = 0.76-2.23, P = 0.34). The safety analysis showed no differences between BDP and 5-ASA (OR 0.55, 95% CI = 0.24-1.27, P = 0.16). The lack of difference is maintained even when the study with prednisone is added (OR 0.67, 95% CI = 0.44-1.01, P = 0.06). However, the trend of difference is clear and indicates a more favourable safety profile of BDP compared to 5-ASA and PD. Oral prolonged release BDP showed a superior efficacy vs. oral 5-ASA in inducing clinical improvement of mild

Efficacy and Safety of Oral Beclomethasone Dipropionate in Ulcerative Colitis: A Systematic Review and Meta-Analysis

PubMed Central

Bennato, Raffaele; Lombardi, Giovanni; Riccio, Elisabetta; Costantino, Giuseppe; Fries, Walter

2016-01-01

Background and Aim We performed a systematic review and meta-analysis of all the available evidence comparing efficacy and safety of oral prolonged released beclomethasone dipropionate (BDP) to active oral controls in patients with mild-to-moderate ulcerative colitis (UC). A subgroup-analysis compared the effectiveness of BDP and 5-ASA. Methods Literature research was performed in different databases, as well as manual search to identify abstracts from international meetings with data not included in extensive publications. Experts in the field and companies involved in BDP development and manufacture were contacted to identify unpublished studies used for registration purposes. Dichotomous data were pooled to obtain odds ratio meta-analysis. Results Five randomized controlled trials that compared oral BDP 5mg/day vs. all oral active controls in treating UC were identified as eligible. Efficacy and safety have been addressed after 4-week treatment period. One study evaluated efficacy and safety of BDP vs. prednisone and 4 of BDP vs. 5-ASA. Treatment with oral BDP 5 mg/day induces a significant better clinical response compared to oral 5-ASA (OR 1.86, 95% CI = 1.23–2.82, P = 0.003). The effect is detectable even when the comparison to prednisone is added (OR 1.41, 95% CI = 1.03–1.93, P = 0.03). Data on remission indicate that the potential clinical efficacy of BDP may be better than 5-ASA (OR 1.55, 95% CI = 1.00–2.40, P = 0.05). This difference is lost when the comparison with prednisone is added (OR 1.30, 95% CI = 0.76–2.23, P = 0.34). The safety analysis showed no differences between BDP and 5-ASA (OR 0.55, 95% CI = 0.24–1.27, P = 0.16). The lack of difference is maintained even when the study with prednisone is added (OR 0.67, 95% CI = 0.44–1.01, P = 0.06). However, the trend of difference is clear and indicates a more favourable safety profile of BDP compared to 5-ASA and PD. Conclusions Oral prolonged release BDP showed a superior efficacy vs. oral

[Examination of safety improvement by failure record analysis that uses reliability engineering].

PubMed

Kato, Kyoichi; Sato, Hisaya; Abe, Yoshihisa; Ishimori, Yoshiyuki; Hirano, Hiroshi; Higashimura, Kyoji; Amauchi, Hiroshi; Yanakita, Takashi; Kikuchi, Kei; Nakazawa, Yasuo

2010-08-20

How the maintenance checks of the medical treatment system, including start of work check and the ending check, was effective for preventive maintenance and the safety improvement was verified. In this research, date on the failure of devices in multiple facilities was collected, and the data of the trouble repair record was analyzed by the technique of reliability engineering. An analysis of data on the system (8 general systems, 6 Angio systems, 11 CT systems, 8 MRI systems, 8 RI systems, and the radiation therapy system 9) used in eight hospitals was performed. The data collection period assumed nine months from April to December 2008. Seven items were analyzed. (1) Mean time between failures (MTBF) (2) Mean time to repair (MTTR) (3) Mean down time (MDT) (4) Number found by check in morning (5) Failure generation time according to modality. The classification of the breakdowns per device, the incidence, and the tendency could be understood by introducing reliability engineering. Analysis, evaluation, and feedback on the failure generation history are useful to keep downtime to a minimum and to ensure safety.

The roles and functions of safety professionals in Taiwan: Comparing the perceptions of safety professionals and safety educators.

PubMed

Wu, Tsung-Chih

2011-10-01

The perspectives of both internal and external members have to be considered when developing safety curricula. This study discusses perceptional differences between safety educators (SEs) and safety professionals (SPs) regarding the function of SPs. The findings will serve as a reference framework for the establishment of core safety competencies and the development of safety curricula for SPs. 248 respondents, including both SEs and SPs, completed self-administered questionnaires, which included the 45-item safety function scale (SFS). Nine factors were extracted from the scale using exploratory factor analysis (EFA), namely inspection and research, regulatory tasks, emergency procedures and settlement of damage, management and financial affairs, culture change, problem identification and analysis, developing and implementing solutions, knowledge management, and training and communications. Descriptive statistical results indicated that SPs and SEs hold differing views on the rank of the frequency of safety functions. MANOVA results indicated that SPs' perceptions of developing and implementing solutions, training and communications, inspection and research, and management and financial affairs were significantly higher than that of SEs. On the other hand, SE's perceptions regarding participation in regulatory tasks were significantly higher than those of SPs. Based on these results, the author suggests that a clear communication channel should be established between universities and industry to reduce the gap between the perceptions of SEs and SPs. The results of the study are statistically and practically significant. In addition to serving as a reference for the development of safety curricula, the results are also conducive to the establishment of SP roles and functions. Ultimately the development of more suitable safety curricula would open up employment competition for students who graduate from safety-related programs. SPs, on the other hand, can correctly

Statistical power analysis of cardiovascular safety pharmacology studies in conscious rats.

PubMed

Bhatt, Siddhartha; Li, Dingzhou; Flynn, Declan; Wisialowski, Todd; Hemkens, Michelle; Steidl-Nichols, Jill

2016-01-01

Cardiovascular (CV) toxicity and related attrition are a major challenge for novel therapeutic entities and identifying CV liability early is critical for effective derisking. CV safety pharmacology studies in rats are a valuable tool for early investigation of CV risk. Thorough understanding of data analysis techniques and statistical power of these studies is currently lacking and is imperative for enabling sound decision-making. Data from 24 crossover and 12 parallel design CV telemetry rat studies were used for statistical power calculations. Average values of telemetry parameters (heart rate, blood pressure, body temperature, and activity) were logged every 60s (from 1h predose to 24h post-dose) and reduced to 15min mean values. These data were subsequently binned into super intervals for statistical analysis. A repeated measure analysis of variance was used for statistical analysis of crossover studies and a repeated measure analysis of covariance was used for parallel studies. Statistical power analysis was performed to generate power curves and establish relationships between detectable CV (blood pressure and heart rate) changes and statistical power. Additionally, data from a crossover CV study with phentolamine at 4, 20 and 100mg/kg are reported as a representative example of data analysis methods. Phentolamine produced a CV profile characteristic of alpha adrenergic receptor antagonism, evidenced by a dose-dependent decrease in blood pressure and reflex tachycardia. Detectable blood pressure changes at 80% statistical power for crossover studies (n=8) were 4-5mmHg. For parallel studies (n=8), detectable changes at 80% power were 6-7mmHg. Detectable heart rate changes for both study designs were 20-22bpm. Based on our results, the conscious rat CV model is a sensitive tool to detect and mitigate CV risk in early safety studies. Furthermore, these results will enable informed selection of appropriate models and study design for early stage CV studies

Nuclear Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, E G

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Software safety

NASA Technical Reports Server (NTRS)

Leveson, Nancy

1987-01-01

Software safety and its relationship to other qualities are discussed. It is shown that standard reliability and fault tolerance techniques will not solve the safety problem for the present. A new attitude requires: looking at what you do NOT want software to do along with what you want it to do; and assuming things will go wrong. New procedures and changes to entire software development process are necessary: special software safety analysis techniques are needed; and design techniques, especially eliminating complexity, can be very helpful.

Improving food safety within the dairy chain: an application of conjoint analysis.

PubMed

Valeeva, N I; Meuwissen, M P M; Lansink, A G J M Oude; Huirne, R B M

2005-04-01

This study determined the relative importance of attributes of food safety improvement in the production chain of fluid pasteurized milk. The chain was divided into 4 blocks: "feed" (compound feed production and its transport), "farm" (dairy farm), "dairy processing" (transport and processing of raw milk, delivery of pasteurized milk), and "consumer" (retailer/catering establishment and pasteurized milk consumption). The concept of food safety improvement focused on 2 main groups of hazards: chemical (antibiotics and dioxin) and microbiological (Salmonella, Escherichia coli, Mycobacterium paratuberculosis, and Staphylococcus aureus). Adaptive conjoint analysis was used to investigate food safety experts' perceptions of the attributes' importance. Preference data from individual experts (n = 24) on 101 attributes along the chain were collected in a computer-interactive mode. Experts perceived the attributes from the "feed" and "farm" blocks as being more vital for controlling the chemical hazards; whereas the attributes from the "farm" and "dairy processing" were considered more vital for controlling the microbiological hazards. For the chemical hazards, "identification of treated cows" and "quality assurance system of compound feed manufacturers" were considered the most important attributes. For the microbiological hazards, these were "manure supply source" and "action in salmonellosis and M. paratuberculosis cases". The rather high importance of attributes relating to quality assurance and traceability systems of the chain participants indicates that participants look for food safety assurance from the preceding participants. This information has substantial decision-making implications for private businesses along the chain and for the government regarding the food safety improvement of fluid pasteurized milk.

PROTEOMIC ANALYSIS OPTIMIZATION: SELECTIVE PROTEIN SAMPLE ON-COLUMN RETENTION IN REVERSE-PHASE LIQUID CHROMATOGRAPHY

EPA Science Inventory

Why work was done?

To be able to identify, on a proteomic level, cytochromes P450 (CYP) and UDP-glucuronosyltransferases (UGT) in mouse liver microsomes for the conazole exposure study IRP # NHEERL-ECD-SCN-CZ-2002-01-R1_Addendum 1. The new enrichment method was necessary beca...

Anxiety Disorders Interview Schedule – Autism Addendum: Reliability and Validity in Children with Autism Spectrum Disorder

PubMed Central

Kerns, Connor Morrow; Renno, Patricia; Kendall, Philip C.; Wood, Jeffrey J.; Storch, Eric A.

2017-01-01

Objective Assessing anxiety in autism spectrum disorder (ASD) is inherently challenging due to overlapping (e.g., social avoidance) and ambiguous symptoms (e.g., fears of change). An ASD addendum to the Anxiety Disorders Interview Schedule–Child/Parent, Parent Version (ADIS/ASA) was developed to provide a systematic approach for differentiating traditional anxiety disorders from symptoms of ASD and more ambiguous, ASD-related anxiety symptoms. Method Inter-rater reliability and convergent and discriminant validity were examined in a sample of 69 youth with ASD (8–13 years, 75% male, IQ:68–143) seeking treatment for anxiety. The parents of participants completed the ADIS/ASA and a battery of behavioral measures. A second rater independently observed and scored recordings of the original interviews. Results Findings suggest reliable measurement of comorbid (ICC=0.85–0.98; κ =0.67–0.91) as well as ambiguous anxiety-like symptoms (ICC=0.87–95, κ=0.77–0.90) in children with ASD. Convergent and discriminant validity were supported for the traditional anxiety symptoms on the ADIS/ASA, whereas convergent and discriminant validity were partially supported for the ambiguous anxiety-like symptoms. Conclusions Results provide evidence for the reliability and validity of the ADIS/ASA as a measure of traditional anxiety categories in youth with ASD, with partial support for the validity of the ambiguous anxiety-like categories. Unlike other measures, the ADIS/ASA differentiates comorbid anxiety disorders from overlapping and ambiguous anxiety-like symptoms in ASD, allowing for more precise measurement and clinical conceptualization. Ambiguous anxiety-like symptoms appear phenomenologically distinct from comorbid anxiety disorders and may reflect either symptoms of ASD or a novel variant of anxiety in ASD. PMID:27925775

On statistical inference in time series analysis of the evolution of road safety.

PubMed

Commandeur, Jacques J F; Bijleveld, Frits D; Bergel-Hayat, Ruth; Antoniou, Constantinos; Yannis, George; Papadimitriou, Eleonora

2013-11-01

Data collected for building a road safety observatory usually include observations made sequentially through time. Examples of such data, called time series data, include annual (or monthly) number of road traffic accidents, traffic fatalities or vehicle kilometers driven in a country, as well as the corresponding values of safety performance indicators (e.g., data on speeding, seat belt use, alcohol use, etc.). Some commonly used statistical techniques imply assumptions that are often violated by the special properties of time series data, namely serial dependency among disturbances associated with the observations. The first objective of this paper is to demonstrate the impact of such violations to the applicability of standard methods of statistical inference, which leads to an under or overestimation of the standard error and consequently may produce erroneous inferences. Moreover, having established the adverse consequences of ignoring serial dependency issues, the paper aims to describe rigorous statistical techniques used to overcome them. In particular, appropriate time series analysis techniques of varying complexity are employed to describe the development over time, relating the accident-occurrences to explanatory factors such as exposure measures or safety performance indicators, and forecasting the development into the near future. Traditional regression models (whether they are linear, generalized linear or nonlinear) are shown not to naturally capture the inherent dependencies in time series data. Dedicated time series analysis techniques, such as the ARMA-type and DRAG approaches are discussed next, followed by structural time series models, which are a subclass of state space methods. The paper concludes with general recommendations and practice guidelines for the use of time series models in road safety research. Copyright © 2012 Elsevier Ltd. All rights reserved.

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2011 CFR

2011-01-01

... time duration of the turn and must show increments not to exceed one second. The series of tumble turns... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's...

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, Mitchell T.; Bunt, R.; Corradini, M.

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affectmore » reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).« less

Thematic Analysis of Women's Perspectives on the Meaning of Safety During Hospital-Based Birth.

PubMed

Lyndon, Audrey; Malana, Jennifer; Hedli, Laura C; Sherman, Jules; Lee, Henry C

2018-05-01

To explore women's birth experiences to develop an understanding of their perspectives on patient safety during hospital-based birth. Qualitative description using thematic analysis of interview data. Seventeen women ages 29 to 47 years. Women participated in individual or small group interviews about their birth experiences, the physical environment, interactions with clinicians, and what safety meant to them in the context of birth. An interdisciplinary group of five investigators from nursing, medicine, product design, and journalism analyzed transcripts thematically to examine how women experienced feeling safe or unsafe and identify opportunities for improvements in care. Participants experienced feelings of safety on a continuum. These feelings were affected by confidence in providers, the environment and organizational factors, interpersonal interactions, and actions people took during risk moments of rapid or confusing change. Well-organized teams and sensitive interpersonal interactions that demonstrated human connection supported feelings of safety, whereas some routine aspects of care threatened feelings of safety. Physical and emotional safety are inextricably embedded in the patient experience, yet this connection may be overlooked in some inpatient birth settings. Clinicians should be mindful of how the birth environment and their behaviors in it can affect a woman's feelings of safety during birth. Human connection is especially important during risk moments, which represent a liminal space at the intersection of physical and emotional safety. At least one team member should focus on the provision of emotional support during rapidly changing situations to mitigate the potential for negative experiences that can result in emotional harm. Copyright © 2018 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

Analysis of safety impacts of access management alternatives using the surrogate safety assessment model : final report.

DOT National Transportation Integrated Search

2017-06-01

The purpose of this study was to evaluate if the Surrogate Safety Assessment Model (SSAM) could be used to assess the safety of a highway segment or an intersection in terms of the number and type of conflicts and to compare the safety effects of mul...

Theoretical evaluation of the vapor compression cycle with a liquid-line/suction-line heat exchanger, economizer, and ejector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domanski, P.A.

1995-03-01

The report presents a theoretical analysis of three vapor compression cycles which are derived from the Rankine cycle by incorporating a liquid-line/suction-line heat exchanger, economizer, or ejector. These addendums to the basic cycle reduce throttling losses using different principles, and they require different mechanical hardware of different complexity and cost. The theoretical merits of the three modified cycles were evaluated in relation to the reversed Carnot and Rankine cycle. Thirty-eight fluids were included in the study using the Carnahan-Starling-DeSantis equation of state. In general, the benefit of these addendums increases with the amount of the throttling losses realized by themore » refrigerant in the Rankine cycle.« less

Pharmacodynamic analysis of eribulin safety in breast cancer patients using real-world post-marketing surveillance data.

PubMed

Kawamura, Takahisa; Kasai, Hidefumi; Fermanelli, Valentina; Takahashi, Toshiaki; Sakata, Yukinori; Matsuoka, Toshiyuki; Ishii, Mika; Tanigawara, Yusuke

2018-06-22

Post-marketing surveillance is useful to collect safety data in real-world clinical settings. In this study, we firstly applied the post-marketing real-world data on a mechanistic model analysis for neutropenic profiles of eribulin in patients with recurrent or metastatic breast cancer (RBC/MBC). Demographic and safety data were collected using an active surveillance method from eribulin-treated RBC/MBC patients. Changes in neutrophil counts over time were analyzed using a mechanistic pharmacodynamic model. Pathophysiological factors that may affect the severity of neutropenia were investigated and neutropenic patterns were simulated for different treatment schedules. Clinical and laboratory data were collected from 401 patients (5199 neutrophil count measurements) who had not received granulocyte colony stimulating factor and were eligible for pharmacodynamic analysis. The estimated mean parameters were: mean transit time = 104.5 h, neutrophil proliferation rate constant = 0.0377 h -1 , neutrophil elimination rate constant = 0.0295 h -1 , and linear coefficient of drug effect = 0.0413 mL/ng. Low serum albumin levels and low baseline neutrophil counts were associated with severe neutropenia. The probability of grade ≥3 neutropenia was predicted to be 69%, 27%, and 27% for patients on standard, biweekly, and triweekly treatment scenarios, respectively, based on virtual simulations using the developed pharmacodynamic model. In conclusion, this is the first application of post-marketing surveillance data to a model-based safety analysis. This analysis of safety data reflecting authentic clinical settings will provide useful information on the safe use and potential risk factors of eribulin. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Biosensors for functional food safety and analysis.

PubMed

Lavecchia, Teresa; Tibuzzi, Arianna; Giardi, Maria Teresa

2010-01-01

The importance of safety and functionality analysis of foodstuffs and raw materials is supported by national legislations and European Union (EU) directives concerning not only the amount of residues of pollutants and pathogens but also the activity and content of food additives and the health claims stated on their labels. In addition, consumers' awareness of the impact of functional foods' on their well-being and their desire for daily healthcare without the intake pharmaceuticals has immensely in recent years. Within this picture, the availability of fast, reliable, low cost control systems to measure the content and the quality of food additives and nutrients with health claims becomes mandatory, to be used by producers, consumers and the governmental bodies in charge of the legal supervision of such matters. This review aims at describing the most important methods and tools used for food analysis, starting with the classical methods (e.g., gas-chromatography GC, high performance liquid chromatography HPLC) and moving to the use of biosensors-novel biological material-based equipments. Four types of bio-sensors, among others, the novel photosynthetic proteins-based devices which are more promising and common in food analysis applications, are reviewed. A particular highlight on biosensors for the emerging market of functional foods is given and the most widely applied functional components are reviewed with a comprehensive analysis of papers published in the last three years; this report discusses recent trends for sensitive, fast, repeatable and cheap measurements, focused on the detection of vitamins, folate (folic acid), zinc (Zn), iron (Fe), calcium (Ca), fatty acids (in particular Omega 3), phytosterols and phytochemicals. A final market overview emphasizes some practical aspects ofbiosensor applications.

Safety Analysis of FMS/CTAS Interactions During Aircraft Arrivals

NASA Technical Reports Server (NTRS)

Leveson, Nancy G.

1998-01-01

This grant funded research on human-computer interaction design and analysis techniques, using future ATC environments as a testbed. The basic approach was to model the nominal behavior of both the automated and human procedures and then to apply safety analysis techniques to these models. Our previous modeling language, RSML, had been used to specify the system requirements for TCAS II for the FAA. Using the lessons learned from this experience, we designed a new modeling language that (among other things) incorporates features to assist in designing less error-prone human-computer interactions and interfaces and in detecting potential HCI problems, such as mode confusion. The new language, SpecTRM-RL, uses "intent" abstractions, based on Rasmussen's abstraction hierarchy, and includes both informal (English and graphical) specifications and formal, executable models for specifying various aspects of the system. One of the goals for our language was to highlight the system modes and mode changes to assist in identifying the potential for mode confusion. Three published papers resulted from this research. The first builds on the work of Degani on mode confusion to identify aspects of the system design that could lead to potential hazards. We defined and modeled modes differently than Degani and also defined design criteria for SpecTRM-RL models. Our design criteria include the Degani criteria but extend them to include more potential problems. In a second paper, Leveson and Palmer showed how the criteria for indirect mode transitions could be applied to a mode confusion problem found in several ASRS reports for the MD-88. In addition, we defined a visual task modeling language that can be used by system designers to model human-computer interaction. The visual models can be translated into SpecTRM-RL models, and then the SpecTRM-RL suite of analysis tools can be used to perform formal and informal safety analyses on the task model in isolation or integrated with

A framework for a cost benefit analysis of the Fairfax County, Virginia Alcohol Safety Action Project.

DOT National Transportation Integrated Search

1973-01-01

Cost-benefit analysis is sometimes a useful tool for evaluating the advantages and disadvantages of alternative courses of action. The first half of this study was an attempt to further the use of such analysis in the evaluation of a highway safety p...

Prospective Safety Analysis and the Complex Aviation System

NASA Technical Reports Server (NTRS)

Smith, Brian E.

2013-01-01

Fatal accident rates in commercial passenger aviation are at historic lows yet have plateaued and are not showing evidence of further safety advances. Modern aircraft accidents reflect both historic causal factors and new unexpected "Black Swan" events. The ever-increasing complexity of the aviation system, along with its associated technology and organizational relationships, provides fertile ground for fresh problems. It is important to take a proactive approach to aviation safety by working to identify novel causation mechanisms for future aviation accidents before they happen. Progress has been made in using of historic data to identify the telltale signals preceding aviation accidents and incidents, using the large repositories of discrete and continuous data on aircraft and air traffic control performance and information reported by front-line personnel. Nevertheless, the aviation community is increasingly embracing predictive approaches to aviation safety. The "prospective workshop" early assessment tool described in this paper represents an approach toward this prospective mindset-one that attempts to identify the future vectors of aviation and asks the question: "What haven't we considered in our current safety assessments?" New causation mechanisms threatening aviation safety will arise in the future because new (or revised) systems and procedures will have to be used under future contextual conditions that have not been properly anticipated. Many simulation models exist for demonstrating the safety cases of new operational concepts and technologies. However the results from such models can only be as valid as the accuracy and completeness of assumptions made about the future context in which the new operational concepts and/or technologies will be immersed. Of course that future has not happened yet. What is needed is a reasonably high-confidence description of the future operational context, capturing critical contextual characteristics that modulate

Effectiveness of Occupational Health and Safety Training: A Systematic Review with Meta-Analysis

ERIC Educational Resources Information Center

Ricci, Federico; Chiesi, Andrea; Bisio, Carlo; Panari, Chiara; Pelosi, Annalisa

2016-01-01

Purpose: This meta-analysis aims to verify the efficacy of occupational health and safety (OHS) training in terms of knowledge, attitude and beliefs, behavior and health. Design/methodology/approach: The authors included studies published in English (2007-2014) selected from ten databases. Eligibility criteria were studies concerned with the…

Rapid Method for Sodium Hydroxide Fusion of Asphalt ...

EPA Pesticide Factsheets

Technical Brief--Addendum to Selected Analytical Methods (SAM) 2012 The method will be used for qualitative analysis of americium-241, plutonium-238, plutonium-239, radium-226, strontium-90, uranium-234, uranium-235 and uranium-238 in asphalt matrices samples.

CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, S

2009-04-21

With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007

NASA System Safety Handbook. Volume 1; System Safety Framework and Concepts for Implementation

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Smith, Curtis; Stamatelatos, Michael; Youngblood, Robert

2011-01-01

System safety assessment is defined in NPR 8715.3C, NASA General Safety Program Requirements as a disciplined, systematic approach to the analysis of risks resulting from hazards that can affect humans, the environment, and mission assets. Achievement of the highest practicable degree of system safety is one of NASA's highest priorities. Traditionally, system safety assessment at NASA and elsewhere has focused on the application of a set of safety analysis tools to identify safety risks and formulate effective controls.1 Familiar tools used for this purpose include various forms of hazard analyses, failure modes and effects analyses, and probabilistic safety assessment (commonly also referred to as probabilistic risk assessment (PRA)). In the past, it has been assumed that to show that a system is safe, it is sufficient to provide assurance that the process for identifying the hazards has been as comprehensive as possible and that each identified hazard has one or more associated controls. The NASA Aerospace Safety Advisory Panel (ASAP) has made several statements in its annual reports supporting a more holistic approach. In 2006, it recommended that "... a comprehensive risk assessment, communication and acceptance process be implemented to ensure that overall launch risk is considered in an integrated and consistent manner." In 2009, it advocated for "... a process for using a risk-informed design approach to produce a design that is optimally and sufficiently safe." As a rationale for the latter advocacy, it stated that "... the ASAP applauds switching to a performance-based approach because it emphasizes early risk identification to guide designs, thus enabling creative design approaches that might be more efficient, safer, or both." For purposes of this preface, it is worth mentioning three areas where the handbook emphasizes a more holistic type of thinking. First, the handbook takes the position that it is important to not just focus on risk on an individual

76 FR 48563 - Medicare and Medicaid Programs; Quarterly Listing of Program Issuances-January Through March 2011...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

...-7205 Ventricular Assist Device (Destination Therapy) Facilities. XIII Medicare-Approved Lung JoAnna...-Approved Ventricular Assist Device (Destination Therapy) Facilities, Addendum XIII: Lung Volume Reduction...-Approved Ventricular Assist Device (Destination Therapy) Facilities (January Through March 2011) Addendum...

Transportation safety data and analysis : Volume 2, Calibration of the highway safety manual and development of new safety performance functions.