Sample records for safety analysis document

  1. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Documented safety analysis. 830.204 Section 830.204 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.204 Documented safety analysis... approval from DOE for the methodology used to prepare the documented safety analysis for the facility...

  2. 10 CFR 830.206 - Preliminary documented safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Preliminary documented safety analysis. 830.206 Section 830.206 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.206 Preliminary documented safety analysis. If construction begins after December 11, 2000, the contractor...

  3. TA-55 Final Safety Analysis Report Comparison Document and DOE Safety Evaluation Report Requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alan Bond

    2001-04-01

    This document provides an overview of changes to the currently approved TA-55 Final Safety Analysis Report (FSAR) that are included in the upgraded FSAR. The DOE Safety Evaluation Report (SER) requirements that are incorporated into the upgraded FSAR are briefly discussed to provide the starting point in the FSAR with respect to the SER requirements.

  4. Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Browne, E.T.

    1981-03-01

    This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.

  5. Car manufacturers and global road safety: a word frequency analysis of road safety documents.

    PubMed

    Roberts, I; Wentz, R; Edwards, P

    2006-10-01

    The World Bank believes that the car manufacturers can make a valuable contribution to road safety in poor countries and has established the Global Road Safety Partnership (GRSP) for this purpose. However, some commentators are sceptical. The authors examined road safety policy documents to assess the extent of any bias. Word frequency analyses of road safety policy documents from the World Health Organization (WHO) and the GRSP. The relative occurrence of key road safety terms was quantified by calculating a word prevalence ratio with 95% confidence intervals. Terms for which there was a fourfold difference in prevalence between the documents were tabulated. Compared to WHO's World report on road traffic injury prevention, the GRSP road safety documents were substantially less likely to use the words speed, speed limits, child restraint, pedestrian, public transport, walking, and cycling, but substantially more likely to use the words school, campaign, driver training, and billboard. There are important differences in emphasis in road safety policy documents prepared by WHO and the GRSP. Vigilance is needed to ensure that the road safety interventions that the car industry supports are based on sound evidence of effectiveness.

  6. Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

  7. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 3: Nuclear Safety Analysis Document (NSAD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Nuclear safety analysis as applied to a space base mission is presented. The nuclear safety analysis document summarizes the mission and the credible accidents/events which may lead to nuclear hazards to the general public. The radiological effects and associated consequences of the hazards are discussed in detail. The probability of occurrence is combined with the potential number of individuals exposed to or above guideline values to provide a measure of accident and total mission risk. The overall mission risk has been determined to be low with the potential exposure to or above 25 rem limited to less than 4 individuals per every 1000 missions performed. No radiological risk to the general public occurs during the prelaunch phase at KSC. The most significant risks occur from prolonged exposure to reactor debris following land impact generally associated with the disposal phase of the mission where fission product inventories can be high.

  8. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CROWE, R.D.; PIEPHO, M.G.

    2000-03-23

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  9. Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

    PubMed

    Furlan, Giovanni

    2012-08-01

    Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically

  10. Environment, Health, and Safety - Construction Subcontractors Documents |

    Science.gov Websites

    NREL Environment, Health, and Safety - Construction Subcontractors Documents Environment , Health, and Safety - Construction Subcontractors Documents The purpose of this page is to ensure NREL Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and

  11. Microgravity Experiments Safety and Integration Requirements Document Tree

    NASA Technical Reports Server (NTRS)

    Hogan, Jean M.

    1995-01-01

    This report is a document tree of the safety and integration documents required to develop a space experiment. Pertinent document information for each of the top level (tier one) safety and integration documents, and their applicable and reference (tier two) documents has been identified. This information includes: document title, revision level, configuration management, electronic availability, listed applicable and reference documents, source for obtaining the document, and document owner. One of the main conclusions of this report is that no single document tree exists for all safety and integration documents, regardless of the Shuttle carrier. This document also identifies the need for a single point of contact for customers wishing to access documents. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center, as well as for all developers of space experiments.

  12. Safety and fitness electronic records (SAFER) system : logical architecture document : working draft

    DOT National Transportation Integrated Search

    1997-01-31

    This Logical Architecture Document includes the products developed during the functional analysis of the Safety and Fitness Electronic Records (SAFER) System. This document, along with the companion Operational Concept and Physical Architecture Docum...

  13. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

  14. Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-03-01

    The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

  15. Electronic Medical Record Documentation of Driving Safety for Veterans with Diagnosed Dementia.

    PubMed

    Vair, Christina L; King, Paul R; Gass, Julie; Eaker, April; Kusche, Anna; Wray, Laura O

    2018-01-01

    Many older adults continue to drive following dementia diagnosis, with medical providers increasingly likely to be involved in addressing such safety concerns. This study examined electronic medical record (EMR) documentation of driving safety for veterans with dementia (N = 118) seen in Veterans Affairs primary care and interdisciplinary geriatrics clinics in one geographic region over a 10-year period. Qualitative directed content analysis of retrospective EMR data. Assessment of known risk factors or subjective concerns for unsafe driving were documented in fewer than half of observed cases; specific recommendations for driving safety were evident for a minority of patients, with formal driving evaluation the most frequently documented recommendation by providers. Utilizing data from actual clinical encounters provides a unique snapshot of how driving risk and safety concerns are addressed for veterans with dementia. This information provides a meaningful frame of reference for understanding potential strengths and possible gaps in how this important topic area is being addressed in the course of clinical care. The EMR is an important forum for interprofessional communication, with documentation of driving risk and safety concerns an essential element for continuity of care and ensuring consistency of information delivered to patients and caregivers.

  16. Too much information? A document analysis of sport safety resources from key organisations

    PubMed Central

    Finch, Caroline F

    2016-01-01

    Objectives The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Design Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. Setting This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. Participants The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. Results The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. Conclusions People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based

  17. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

  18. Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beaulieu, R. A.

    The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less

  19. A Synthetic Vision Preliminary Integrated Safety Analysis

    NASA Technical Reports Server (NTRS)

    Hemm, Robert; Houser, Scott

    2001-01-01

    This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

  20. Too much information? A document analysis of sport safety resources from key organisations.

    PubMed

    Bekker, Sheree; Finch, Caroline F

    2016-05-06

    The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based, fully up to date or even effective in supporting sport

  1. Intranet-based safety documentation in management of major hazards and occupational health and safety.

    PubMed

    Leino, Antti

    2002-01-01

    In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

  2. Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1988-12-15

    This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in thesemore » appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.« less

  3. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Safety management system document and data maintenance (1) Procedures which establish and maintain control of all documents and data relevant to the safety management system. (2) Documents are available at... safety management system have? 96.250 Section 96.250 Navigation and Navigable Waters COAST GUARD...

  4. Overview of Energy Systems' safety analysis report programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-03-01

    The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

  5. Comprehensive Safety Analysis 2010 Safety Measurement System (SMS) Methodology, Version 2.1 Revised December 2010

    DOT National Transportation Integrated Search

    2010-12-01

    This report documents the Safety Measurement System (SMS) methodology developed to support the Comprehensive Safety Analysis 2010 (CSA 2010) Initiative for the Federal Motor Carrier Safety Administration (FMCSA). The SMS is one of the major tools for...

  6. Motorcoach and school bus fire safety analysis.

    DOT National Transportation Integrated Search

    2016-11-01

    This report documents a motorcoach and school bus fire safety analysis performed by the John A. Volpe National Transportation Systems Center (Volpe) for the Federal Motor Carrier Safety Administration. This report aims to: 1) identify the causes, fre...

  7. Safety analysis and review system (SARS) assessment report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Browne, E.T.

    1981-03-01

    Under DOE Order 5481.1, Safety Analysis and Review System for DOE Operations, safety analyses are required for DOE projects in order to ensure that: (1) potential hazards are systematically identified; (2) potential impacts are analyzed; (3) reasonable measures have been taken to eliminate, control, or mitigate the hazards; and (4) there is documented management authorization of the DOE operation based on an objective assessment of the adequacy of the safety analysis. This report is intended to provide the DOE Office of Plans and Technology Assessment (OPTA) with an independent evaluation of the adequacy of the ongoing safety analysis effort. Asmore » part of this effort, a number of site visits and interviews were conducted, and FE SARS documents were reviewed. The latter included SARS Implementation Plans for a number of FE field offices, as well as safety analysis reports completed for certain FE operations. This report summarizes SARS related efforts at the DOE field offices visited and evaluates the extent to which they fulfill the requirements of DOE 5481.1.« less

  8. Transit safety retrofit package development : applications requirements document.

    DOT National Transportation Integrated Search

    2014-05-01

    This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

  9. Automated document analysis system

    NASA Astrophysics Data System (ADS)

    Black, Jeffrey D.; Dietzel, Robert; Hartnett, David

    2002-08-01

    A software application has been developed to aid law enforcement and government intelligence gathering organizations in the translation and analysis of foreign language documents with potential intelligence content. The Automated Document Analysis System (ADAS) provides the capability to search (data or text mine) documents in English and the most commonly encountered foreign languages, including Arabic. Hardcopy documents are scanned by a high-speed scanner and are optical character recognized (OCR). Documents obtained in an electronic format bypass the OCR and are copied directly to a working directory. For translation and analysis, the script and the language of the documents are first determined. If the document is not in English, the document is machine translated to English. The documents are searched for keywords and key features in either the native language or translated English. The user can quickly review the document to determine if it has any intelligence content and whether detailed, verbatim human translation is required. The documents and document content are cataloged for potential future analysis. The system allows non-linguists to evaluate foreign language documents and allows for the quick analysis of a large quantity of documents. All document processing can be performed manually or automatically on a single document or a batch of documents.

  10. Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source.more » The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.« less

  11. Analysis of microgravity space experiments Space Shuttle programmatic safety requirements

    NASA Technical Reports Server (NTRS)

    Terlep, Judith A.

    1996-01-01

    This report documents the results of an analysis of microgravity space experiments space shuttle programmatic safety requirements and recommends the creation of a Safety Compliance Data Package (SCDP) Template for both flight and ground processes. These templates detail the programmatic requirements necessary to produce a complete SCDP. The templates were developed from various NASA centers' requirement documents, previously written guidelines on safety data packages, and from personal experiences. The templates are included in the back as part of this report.

  12. Electronic availability of microgravity experiments safety and integration requirements documents

    NASA Technical Reports Server (NTRS)

    Hogan, Jean M.

    1995-01-01

    This follow-on to NASA Contractor Report 195447, Microgravity Experiments Safety and Integration Requirements Document Tree, provides the details for accessing the systems that contain the official, electronic versions of the documents initially researched in NASA Contractor Report 195447. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center (PDC), as well as for all developers of space experiments. The PDC has acquired the hardware, software, ID's, and passwords necessary to access most of these systems and is now able to provide customers with current document information as well as immediate delivery of available documents in either electronic or hard copy format.

  13. Intelligent Document Gateway: A Service System Case Study and Analysis

    NASA Astrophysics Data System (ADS)

    Krishna, Vikas; Lelescu, Ana

    In today's fast paced world, it is necessary to process business ­documents expediently, accurately, and diligently. In other words, processing has to be fast, errors must be prevented (or caught and corrected quickly), and documents cannot be lost or misplaced. The failure to meet these criteria, depending on the type and purpose of the documents, can have serious business, legal, or safety consequences. In this paper, we evaluated a B2B order placement service system that allows clients to place orders for products and services over a network. We describe the order placement service before and after deploying the Intelligent Document Gateway (IDG), a document-centric business process automation technology from IBM Research. Using service science perspective and service systems frameworks, we provide an analysis of how IDG improved the value proposition for both the service providers and service clients.

  14. Automation for System Safety Analysis

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Fleming, Land; Throop, David; Thronesbery, Carroll; Flores, Joshua; Bennett, Ted; Wennberg, Paul

    2009-01-01

    This presentation describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

  15. Software Safety Analysis of a Flight Guidance System

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W. (Technical Monitor); Tribble, Alan C.; Miller, Steven P.; Lempia, David L.

    2004-01-01

    This document summarizes the safety analysis performed on a Flight Guidance System (FGS) requirements model. In particular, the safety properties desired of the FGS model are identified and the presence of the safety properties in the model is formally verified. Chapter 1 provides an introduction to the entire project, while Chapter 2 gives a brief overview of the problem domain, the nature of accidents, model based development, and the four-variable model. Chapter 3 outlines the approach. Chapter 4 presents the results of the traditional safety analysis techniques and illustrates how the hazardous conditions associated with the system trace into specific safety properties. Chapter 5 presents the results of the formal methods analysis technique model checking that was used to verify the presence of the safety properties in the requirements model. Finally, Chapter 6 summarizes the main conclusions of the study, first and foremost that model checking is a very effective verification technique to use on discrete models with reasonable state spaces. Additional supporting details are provided in the appendices.

  16. 14 CFR Appendix B to Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

  17. 14 CFR Appendix B to Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

  18. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  19. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  20. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  1. Reliability Modeling Methodology for Independent Approaches on Parallel Runways Safety Analysis

    NASA Technical Reports Server (NTRS)

    Babcock, P.; Schor, A.; Rosch, G.

    1998-01-01

    This document is an adjunct to the final report An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies. That report presents the results of our analysis of the problem of simultaneous but independent, approaches of two aircraft on parallel runways (independent approaches on parallel runways, or IAPR). This introductory chapter presents a brief overview and perspective of approaches and methodologies for performing safety analyses for complex systems. Ensuing chapter provide the technical details that underlie the approach that we have taken in performing the safety analysis for the IAPR concept.

  2. Health Information Technology, Patient Safety, and Professional Nursing Care Documentation in Acute Care Settings.

    PubMed

    Lavin, Mary Ann; Harper, Ellen; Barr, Nancy

    2015-04-14

    The electronic health record (EHR) is a documentation tool that yields data useful in enhancing patient safety, evaluating care quality, maximizing efficiency, and measuring staffing needs. Although nurses applaud the EHR, they also indicate dissatisfaction with its design and cumbersome electronic processes. This article describes the views of nurses shared by members of the Nursing Practice Committee of the Missouri Nurses Association; it encourages nurses to share their EHR concerns with Information Technology (IT) staff and vendors and to take their place at the table when nursing-related IT decisions are made. In this article, we describe the experiential-reflective reasoning and action model used to understand staff nurses' perspectives, share committee reflections and recommendations for improving both documentation and documentation technology, and conclude by encouraging nurses to develop their documentation and informatics skills. Nursing issues include medication safety, documentation and standards of practice, and EHR efficiency. IT concerns include interoperability, vendors, innovation, nursing voice, education, and collaboration.

  3. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KRIPPS, L.J.

    2005-02-18

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the needmore » for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.« less

  4. 78 FR 47805 - Test Documentation for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... Documents Access and Management System (ADAMS): You may access publicly available documents online in the... Management Plans for Digital Computer Software used in Safety Systems of Nuclear Power Plants,'' issued for... Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Revision...

  5. SU-E-T-201: Safety-Focused Customization of Treatment Plan Documentation.

    PubMed

    Schubert, L; Westerly, D; Stuhr, K; Miften, M

    2012-06-01

    Plan report documentation contains numerous details about the treatment plan, but critical information for patient safety is often presented without special emphasis. This can make it difficult to detect errors from treatment planning and data transfer during the initial chart review. The objective of this work is to improve safety measures in radiation therapy practice by customizing the treatment plan report to emphasize safety-critical information. Commands within the template file from a commercial planning system (Eclipse, Varian Medical Systems) that automatically generates the treatment plan report were reviewed and modified. Safety-critical plan parameters were identified from published risks known to be inherent in the treatment planning process. Risks having medium to high potential impact on patient safety included incorrect patient identifiers, erroneous use of the treatment prescription, and incorrect transfer of beam parameters or consideration of accessories. Specific examples of critical information in the treatment plan report that can be overlooked during a chart review included prescribed dose per fraction and number of fractions, wedge and open field monitor units, presence of beam accessories, and table shifts for patient setup. Critical information was streamlined and concentrated. Patient and plan identification, dose prescription details, and patient positioning couch shift instructions were placed on the first page. Plan information to verify the correct data transfer to the record and verify system was re-organized in an easy to review tabular format and placed in the second page of the customized printout. Placeholders were introduced to indicate both the presence and absence of beam modifiers. Font sizes and spacing were adjusted for clarity, and departmental standards and terminology were introduced to streamline data communication among staff members. Plan reporting documentation has been customized to concentrate and emphasize safety

  6. Documenting quality improvement and patient safety efforts: the quality portfolio. A statement from the academic hospitalist taskforce.

    PubMed

    Taylor, Benjamin B; Parekh, Vikas; Estrada, Carlos A; Schleyer, Anneliese; Sharpe, Bradley

    2014-01-01

    Physicians increasingly investigate, work, and teach to improve the quality of care and safety of care delivery. The Society of General Internal Medicine Academic Hospitalist Task Force sought to develop a practical tool, the quality portfolio, to systematically document quality and safety achievements. The quality portfolio was vetted with internal and external stakeholders including national leaders in academic medicine. The portfolio was refined for implementation to include an outlined framework, detailed instructions for use and an example to guide users. The portfolio has eight categories including: (1) a faculty narrative, (2) leadership and administrative activities, (3) project activities, (4) education and curricula, (5) research and scholarship, (6) honors, awards, and recognition, (7) training and certification, and (8) an appendix. The authors offer this comprehensive, yet practical tool as a method to document quality and safety activities. It is relevant for physicians across disciplines and institutions and may be useful as a standalone document or as an adjunct to traditional promotion documents. As the Next Accreditation System is implemented, academic medical centers will require faculty who can teach and implement the systems-based practice requirements. The quality portfolio is a method to document quality improvement and safety activities.

  7. 76 FR 31507 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ... Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission... rule announced the availability of a draft regulatory analysis for public comment. This document... in Section XI, ``Regulatory Analysis.'' The correct ADAMS accession number is ML102380243. DATES: The...

  8. Safety analysis report for the Waste Storage Facility. Revision 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bengston, S.J.

    1994-05-01

    This safety analysis report outlines the safety concerns associated with the Waste Storage Facility located in the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. The three main objectives of the report are: define and document a safety basis for the Waste Storage Facility activities; demonstrate how the activities will be carried out to adequately protect the workers, public, and environment; and provide a basis for review and acceptance of the identified risk that the managers, operators, and owners will assume.

  9. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  10. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  11. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  12. Safety of Zoster Vaccine in Elderly Adults Following Documented Herpes Zoster

    PubMed Central

    Morrison, Vicki A.; Oxman, Michael N.; Levin, Myron J.; Schmader, Kenneth E.; Guatelli, John C.; Betts, Robert F.; Gelb, Larry D.; Pachucki, Constance T.; Keay, Susan K.; Menzies, Barbara; Griffin, Marie R.; Kauffman, Carol A.; Marques, Adriana R.; Toney, John F.; Simberkoff, Michael S.; Serrao, Richard; Arbeit, Robert D.; Gnann, John W.; Greenberg, Richard N.; Holodniy, Mark; Keitel, Wendy A.; Yeh, Shingshing S.; Davis, Larry E.; Crawford, George E.; Neuzil, Kathy M.; Johnson, Gary R.; Zhang, Jane H.; Harbecke, Rith; Chan, Ivan S. F.; Keller, Paul M.; Williams, Heather M.; Boardman, Kathy D.; Silber, Jeffrey L.; Annunziato, Paula W.

    2013-01-01

    Background. After completion of the Shingles Prevention Study (SPS; Department of Veterans Affairs Cooperative Studies Program Number 403), SPS participants who had initially received placebo were offered investigational zoster vaccine without charge. This provided an opportunity to determine the relative safety of zoster vaccine in older adults following documented herpes zoster (HZ). Methods. A total of 13 681 SPS placebo recipients who elected to receive zoster vaccine were followed for serious adverse events (SAE) for 28 days after vaccination. In contrast to the SPS, a prior episode of HZ was not a contraindication to receiving zoster vaccine. The SPS placebo recipients who received zoster vaccine included 420 who had developed documented HZ during the SPS. Results. The mean interval between the onset of HZ and the receipt of zoster vaccine in the 420 recipients with prior HZ was 3.61 years (median interval, 3.77 years [range, 3–85 months]); the interval was <5 years for approximately 80% of recipients. The proportion of vaccinated SPS placebo recipients with prior HZ who developed ≥1 SAE (0.95%) was not significantly different from that of vaccinated SPS placebo recipients with no prior history of HZ (0.66%), and the distribution of SAEs in the 2 groups was comparable. Conclusions. These results demonstrate that the general safety of zoster vaccine in older persons is not altered by a recent history of documented HZ, supporting the safety aspect of the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices recommendation to administer zoster vaccine to all persons ≥60 years of age with no contraindications, regardless of a prior history of HZ. PMID:23633406

  13. Safety of zoster vaccine in elderly adults following documented herpes zoster.

    PubMed

    Morrison, Vicki A; Oxman, Michael N; Levin, Myron J; Schmader, Kenneth E; Guatelli, John C; Betts, Robert F; Gelb, Larry D; Pachucki, Constance T; Keay, Susan K; Menzies, Barbara; Griffin, Marie R; Kauffman, Carol A; Marques, Adriana R; Toney, John F; Simberkoff, Michael S; Serrao, Richard; Arbeit, Robert D; Gnann, John W; Greenberg, Richard N; Holodniy, Mark; Keitel, Wendy A; Yeh, Shingshing S; Davis, Larry E; Crawford, George E; Neuzil, Kathy M; Johnson, Gary R; Zhang, Jane H; Harbecke, Rith; Chan, Ivan S F; Keller, Paul M; Williams, Heather M; Boardman, Kathy D; Silber, Jeffrey L; Annunziato, Paula W

    2013-08-15

    After completion of the Shingles Prevention Study (SPS; Department of Veterans Affairs Cooperative Studies Program Number 403), SPS participants who had initially received placebo were offered investigational zoster vaccine without charge. This provided an opportunity to determine the relative safety of zoster vaccine in older adults following documented herpes zoster (HZ). A total of 13 681 SPS placebo recipients who elected to receive zoster vaccine were followed for serious adverse events (SAE) for 28 days after vaccination. In contrast to the SPS, a prior episode of HZ was not a contraindication to receiving zoster vaccine. The SPS placebo recipients who received zoster vaccine included 420 who had developed documented HZ during the SPS. The mean interval between the onset of HZ and the receipt of zoster vaccine in the 420 recipients with prior HZ was 3.61 years (median interval, 3.77 years [range, 3-85 months]); the interval was <5 years for approximately 80% of recipients. The proportion of vaccinated SPS placebo recipients with prior HZ who developed ≥ 1 SAE (0.95%) was not significantly different from that of vaccinated SPS placebo recipients with no prior history of HZ (0.66%), and the distribution of SAEs in the 2 groups was comparable. These results demonstrate that the general safety of zoster vaccine in older persons is not altered by a recent history of documented HZ, supporting the safety aspect of the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices recommendation to administer zoster vaccine to all persons ≥ 60 years of age with no contraindications, regardless of a prior history of HZ.

  14. Safety analysis report for packaging (onsite) multicanister overpack cask

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Edwards, W.S.

    1997-07-14

    This safety analysis report for packaging (SARP) documents the safety of shipments of irradiated fuel elements in the MUlticanister Overpack (MCO) and MCO Cask for a highway route controlled quantity, Type B fissile package. This SARP evaluates the package during transfers of (1) water-filled MCOs from the K Basins to the Cold Vacuum Drying Facility (CVDF) and (2) sealed and cold vacuum dried MCOs from the CVDF in the 100 K Area to the Canister Storage Building in the 200 East Area.

  15. Document reconstruction by layout analysis of snippets

    NASA Astrophysics Data System (ADS)

    Kleber, Florian; Diem, Markus; Sablatnig, Robert

    2010-02-01

    Document analysis is done to analyze entire forms (e.g. intelligent form analysis, table detection) or to describe the layout/structure of a document. Also skew detection of scanned documents is performed to support OCR algorithms that are sensitive to skew. In this paper document analysis is applied to snippets of torn documents to calculate features for the reconstruction. Documents can either be destroyed by the intention to make the printed content unavailable (e.g. tax fraud investigation, business crime) or due to time induced degeneration of ancient documents (e.g. bad storage conditions). Current reconstruction methods for manually torn documents deal with the shape, inpainting and texture synthesis techniques. In this paper the possibility of document analysis techniques of snippets to support the matching algorithm by considering additional features are shown. This implies a rotational analysis, a color analysis and a line detection. As a future work it is planned to extend the feature set with the paper type (blank, checked, lined), the type of the writing (handwritten vs. machine printed) and the text layout of a snippet (text size, line spacing). Preliminary results show that these pre-processing steps can be performed reliably on a real dataset consisting of 690 snippets.

  16. Flight deck party line issues : an Aviation Safety Reporting System analysis

    DOT National Transportation Integrated Search

    1995-06-01

    This document describes an analysis of the Aviation Safety Reporting System : (ASRS) database with regards to human factors aspects concerning the : implementation of Data Link into the flightdeck. The ASRS database contains : thousands of reports co...

  17. Comprehensive safety document/product.

    DOT National Transportation Integrated Search

    2013-06-01

    With 100 counties and more than 800 cities, towns, and township governments in North Carolina, there is a tremendous need to : disseminate road safety information at the local level. For safety gains to be made in NC communities there needs to be bot...

  18. MODEL 9977 B(M)F-96 SAFETY ANALYSIS REPORT FOR PACKAGING

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Abramczyk, G; Paul Blanton, P; Kurt Eberl, K

    2006-05-18

    This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on and for the 9977 Shipping Package, referred to as the General Purpose Fissile Package (GPFP). The performance evaluation presented in this SARP documents the compliance of the 9977 package with the regulatory safety requirements for Type B packages. Per 10 CFR 71.59, for the 9977 packages evaluated in this SARP, the value of ''N'' is 50, and the Transport Index based on nuclear criticality control is 1.0. The 9977 package is designed with a high degree of single containment. The 9977 complies with 10 CFR 71more » (2002), Department of Energy (DOE) Order 460.1B, DOE Order 460.2, and 10 CFR 20 (2003) for As Low As Reasonably Achievable (ALARA) principles. The 9977 also satisfies the requirements of the Regulations for the Safe Transport of Radioactive Material--1996 Edition (Revised)--Requirements. IAEA Safety Standards, Safety Series No. TS-R-1 (ST-1, Rev.), International Atomic Energy Agency, Vienna, Austria (2000). The 9977 package is designed, analyzed and fabricated in accordance with Section III of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code, 1992 edition.« less

  19. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  20. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  1. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  2. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  3. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  4. Failures in communication through documents and documentation across the perioperative pathway.

    PubMed

    Braaf, Sandra; Riley, Robin; Manias, Elizabeth

    2015-07-01

    To explore how communication failures occur in documents and documentations across the perioperative pathway in nurses' interactions with other nurses, surgeons and anaesthetists. Documents and documentation are used to communicate vital patient and procedural information among nurses, and in nurses' interactions with surgeons and anaesthetists, across the perioperative pathway. Previous research indicates that communication failure regularly occurs in the perioperative setting. A qualitative study was undertaken. The study was conducted over three hospitals in Melbourne, Australia. One hundred and twenty-five healthcare professionals from the disciplines of surgery, anaesthesia and nursing participated in the study. Data collection commenced in January 2010 and concluded in October 2010. Data were generated through 350 hours of observation, two focus groups and 20 semi-structured interviews. A detailed thematic analysis was undertaken. Communication failure occurred owing to a reliance on documents and documentation to transfer information at patient transition points, poor quality documents and documentation, and problematic access to information. Institutional ruling practices of professional practice, efficiency and productivity, and fiscal constraint dominated the coordination of nurses', surgeons' and anaesthetists' communication through documents and documentation. These governing practices configured communication to be incongruous with reliably meeting safety and quality objectives. Communication failure occurred because important information was sometimes buried in documents, insufficient, inaccurate, out-of-date or not verbally reinforced. Furthermore, busy nurses were not always able to access information they required in a timely manner. Patient safety was affected, which led to delays in treatment and at times inadequate care. Organisational support needs to be provided to nurses, surgeons and anaesthetists so they have sufficient time to complete

  5. RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KOZLOWSKI, S.D.

    2007-05-30

    This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

  6. A Generic Software Safety Document Generator

    NASA Technical Reports Server (NTRS)

    Denney, Ewen; Venkatesan, Ram Prasad

    2004-01-01

    Formal certification is based on the idea that a mathematical proof of some property of a piece of software can be regarded as a certificate of correctness which, in principle, can be subjected to external scrutiny. In practice, however, proofs themselves are unlikely to be of much interest to engineers. Nevertheless, it is possible to use the information obtained from a mathematical analysis of software to produce a detailed textual justification of correctness. In this paper, we describe an approach to generating textual explanations from automatically generated proofs of program safety, where the proofs are of compliance with an explicit safety policy that can be varied. Key to this is tracing proof obligations back to the program, and we describe a tool which implements this to certify code auto-generated by AutoBayes and AutoFilter, program synthesis systems under development at the NASA Ames Research Center. Our approach is a step towards combining formal certification with traditional certification methods.

  7. Model-Based Safety Analysis

    NASA Technical Reports Server (NTRS)

    Joshi, Anjali; Heimdahl, Mats P. E.; Miller, Steven P.; Whalen, Mike W.

    2006-01-01

    System safety analysis techniques are well established and are used extensively during the design of safety-critical systems. Despite this, most of the techniques are highly subjective and dependent on the skill of the practitioner. Since these analyses are usually based on an informal system model, it is unlikely that they will be complete, consistent, and error free. In fact, the lack of precise models of the system architecture and its failure modes often forces the safety analysts to devote much of their effort to gathering architectural details about the system behavior from several sources and embedding this information in the safety artifacts such as the fault trees. This report describes Model-Based Safety Analysis, an approach in which the system and safety engineers share a common system model created using a model-based development process. By extending the system model with a fault model as well as relevant portions of the physical system to be controlled, automated support can be provided for much of the safety analysis. We believe that by using a common model for both system and safety engineering and automating parts of the safety analysis, we can both reduce the cost and improve the quality of the safety analysis. Here we present our vision of model-based safety analysis and discuss the advantages and challenges in making this approach practical.

  8. CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kessler, S

    2009-04-21

    With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007

  9. Document analysis with neural net circuits

    NASA Technical Reports Server (NTRS)

    Graf, Hans Peter

    1994-01-01

    Document analysis is one of the main applications of machine vision today and offers great opportunities for neural net circuits. Despite more and more data processing with computers, the number of paper documents is still increasing rapidly. A fast translation of data from paper into electronic format is needed almost everywhere, and when done manually, this is a time consuming process. Markets range from small scanners for personal use to high-volume document analysis systems, such as address readers for the postal service or check processing systems for banks. A major concern with present systems is the accuracy of the automatic interpretation. Today's algorithms fail miserably when noise is present, when print quality is poor, or when the layout is complex. A common approach to circumvent these problems is to restrict the variations of the documents handled by a system. In our laboratory, we had the best luck with circuits implementing basic functions, such as convolutions, that can be used in many different algorithms. To illustrate the flexibility of this approach, three applications of the NET32K circuit are described in this short viewgraph presentation: locating address blocks, cleaning document images by removing noise, and locating areas of interest in personal checks to improve image compression. Several of the ideas realized in this circuit that were inspired by neural nets, such as analog computation with a low resolution, resulted in a chip that is well suited for real-world document analysis applications and that compares favorably with alternative, 'conventional' circuits.

  10. Accident analysis and control options in support of the sludge water system safety analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    HEY, B.E.

    A hazards analysis was initiated for the SWS in July 2001 (SNF-8626, K Basin Sludge and Water System Preliminary Hazard Analysis) and updated in December 2001 (SNF-10020 Rev. 0, Hazard Evaluation for KE Sludge and Water System - Project A16) based on conceptual design information for the Sludge Retrieval System (SRS) and 60% design information for the cask and container. SNF-10020 was again revised in September 2002 to incorporate new hazards identified from final design information and from a What-if/Checklist evaluation of operational steps. The process hazards, controls, and qualitative consequence and frequency estimates taken from these efforts have beenmore » incorporated into Revision 5 of HNF-3960, K Basins Hazards Analysis. The hazards identification process documented in the above referenced reports utilized standard industrial safety techniques (AIChE 1992, Guidelines for Hazard Evaluation Procedures) to systematically guide several interdisciplinary teams through the system using a pre-established set of process parameters (e.g., flow, temperature, pressure) and guide words (e.g., high, low, more, less). The teams generally included representation from the U.S. Department of Energy (DOE), K Basins Nuclear Safety, T Plant Nuclear Safety, K Basin Industrial Safety, fire protection, project engineering, operations, and facility engineering.« less

  11. Integrated Safety Analysis Teams

    NASA Technical Reports Server (NTRS)

    Wetherholt, Jonathan C.

    2008-01-01

    Today's complex systems require understanding beyond one person s capability to comprehend. Each system requires a team to divide the system into understandable subsystems which can then be analyzed with an Integrated Hazard Analysis. The team must have both specific experiences and diversity of experience. Safety experience and system understanding are not always manifested in one individual. Group dynamics make the difference between success and failure as well as the difference between a difficult task and a rewarding experience. There are examples in the news which demonstrate the need to connect the pieces of a system into a complete picture. The Columbia disaster is now a standard example of a low consequence hazard in one part of the system; the External Tank is a catastrophic hazard cause for a companion subsystem, the Space Shuttle Orbiter. The interaction between the hardware, the manufacturing process, the handling, and the operations contributed to the problem. Each of these had analysis performed, but who constituted the team which integrated this analysis together? This paper will explore some of the methods used for dividing up a complex system; and how one integration team has analyzed the parts. How this analysis has been documented in one particular launch space vehicle case will also be discussed.

  12. Integrated vehicle-based safety systems (IVBSS) : light vehicle platform field operational test data analysis plan.

    DOT National Transportation Integrated Search

    2009-12-22

    This document presents the University of Michigan Transportation Research Institutes plan to : perform analysis of data collected from the light vehicle platform field operational test of the : Integrated Vehicle-Based Safety Systems (IVBSS) progr...

  13. Integrated vehicle-based safety systems (IVBSS) : heavy truck platform field operational test data analysis plan.

    DOT National Transportation Integrated Search

    2009-11-23

    This document presents the University of Michigan Transportation Research Institutes plan to perform : analysis of data collected from the heavy truck platform field operational test of the Integrated Vehicle- : Based Safety Systems (IVBSS) progra...

  14. Cultural diversity: blind spot in medical curriculum documents, a document analysis.

    PubMed

    Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

    2014-08-22

    Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

  15. Transportation safety data and analysis : Volume 2, Calibration of the highway safety manual and development of new safety performance functions.

    DOT National Transportation Integrated Search

    2011-03-01

    This report documents the calibration of the Highway Safety Manual (HSM) safety performance function (SPF) : for rural two-lane two-way roadway segments in Utah and the development of new models using negative : binomial and hierarchical Bayesian mod...

  16. Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1994-10-01

    This document is the second volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of failure modes and effects analysis; accident analysis; operational safety requirements; quality assurance program; ES&H management program; environmental, safety, and health systems critical to safety; summary of waste-management program; environmental monitoring program; facility expansion, decontamination, and decommissioning; summary of emergency response plan; summary plan for employee training; summary plan for operating procedures; glossary; and appendices A and B.« less

  17. Cultural diversity: blind spot in medical curriculum documents, a document analysis

    PubMed Central

    2014-01-01

    Background Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. Methods In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Results Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Conclusions Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula. PMID:25150546

  18. Graph-based layout analysis for PDF documents

    NASA Astrophysics Data System (ADS)

    Xu, Canhui; Tang, Zhi; Tao, Xin; Li, Yun; Shi, Cao

    2013-03-01

    To increase the flexibility and enrich the reading experience of e-book on small portable screens, a graph based method is proposed to perform layout analysis on Portable Document Format (PDF) documents. Digital born document has its inherent advantages like representing texts and fractional images in explicit form, which can be straightforwardly exploited. To integrate traditional image-based document analysis and the inherent meta-data provided by PDF parser, the page primitives including text, image and path elements are processed to produce text and non text layer for respective analysis. Graph-based method is developed in superpixel representation level, and page text elements corresponding to vertices are used to construct an undirected graph. Euclidean distance between adjacent vertices is applied in a top-down manner to cut the graph tree formed by Kruskal's algorithm. And edge orientation is then used in a bottom-up manner to extract text lines from each sub tree. On the other hand, non-textual objects are segmented by connected component analysis. For each segmented text and non-text composite, a 13-dimensional feature vector is extracted for labelling purpose. The experimental results on selected pages from PDF books are presented.

  19. Clinical decision support improves quality of telephone triage documentation--an analysis of triage documentation before and after computerized clinical decision support.

    PubMed

    North, Frederick; Richards, Debra D; Bremseth, Kimberly A; Lee, Mary R; Cox, Debra L; Varkey, Prathibha; Stroebel, Robert J

    2014-03-20

    Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS can improve documentation, further study is needed

  20. Authorization basis supporting documentation for plutonium finishing plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, J.P., Fluor Daniel Hanford

    1997-03-05

    The identification and definition of the authorization basis for the Plutonium Finishing Plant (PFP) facility and operations are essential for compliance to DOE Order 5480.21, Unreviewed Safety Questions. The authorization basis, as defined in the Order, consists of those aspects of the facility design basis, i.e., the structures, systems and components (SSCS) and the operational requirements that are considered to be important to the safety of operations and are relied upon by DOE to authorize operation of the facility. These facility design features and their function in various accident scenarios are described in WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysismore » Report (FSAR), Chapter 9, `Accident Analysis.` Figure 1 depicts the relationship of the Authorization Basis to its components and other information contained in safety documentation supporting the Authorization Basis. The PFP SSCs that are important to safety, collectively referred to as the `Safety Envelope` are discussed in various chapters of the FSAR and in WHC-SD-CP-OSR-010, Plutonium Finishing Plant Operational Safety Requirements. Other documents such as Criticality Safety Evaluation Reports (CSERS) address and support some portions of the Authorization Basis and Safety Envelope.« less

  1. Software Safety Progress in NASA

    NASA Technical Reports Server (NTRS)

    Radley, Charles F.

    1995-01-01

    NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

  2. Documentary analysis of risk-assessment and safety-planning policies and tools in a mental health context.

    PubMed

    Higgins, Agnes; Doyle, Louise; Morrissey, Jean; Downes, Carmel; Gill, Ailish; Bailey, Sive

    2016-08-01

    Despite the articulated need for policies and processes to guide risk assessment and safety planning, limited guidance exists on the processes or procedures to be used to develop such policies, and there is no body of research that examines the quality or content of the risk-management policies developed. The aim of the present study was to analyse the policies of risk and safety management used to guide mental health nursing practice in Ireland. A documentary analysis was performed on 123 documents received from 22 of the 23 directors of nursing contacted. Findings from the analysis revealed a wide variation in how risk, risk assessment, and risk management were defined. Emphasis within the risk documentation submitted was on risk related to self and others, with minimal attention paid to other types of risks. In addition, there was limited evidence of recovery-focused approaches to positive risk taking that involved service users and their families within the risk-related documentation. Many of the risk-assessment tools had not been validated, and lacked consistency or guidance in relation to how they were to be used or applied. The tick-box approach and absence of space for commentary within documentation have the potential to impact severely on the quality of information collected and documented, and subsequent clinical decision-making. Managers, and those tasked with ensuring safety and quality, need to ensure that policies and processes are, where possible, informed by best evidence and are in line with national mental health policy on recovery. © 2016 Australian College of Mental Health Nurses Inc.

  3. The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

    PubMed

    Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

    2016-09-01

    Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

  4. 14 CFR 415.117 - Ground safety.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

  5. 14 CFR 415.117 - Ground safety.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

  6. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

  7. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

  8. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

  9. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., and accident conditions, including consideration of natural and man-made external events... radioactive and other hazardous materials, and consideration of the need for analysis of accidents which may... preparedness, fire protection, waste management, and radiation protection; and (6) With respect to a nonreactor...

  10. 10 CFR 830.205 - Technical safety requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

  11. 10 CFR 830.205 - Technical safety requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

  12. Clinical decision support improves quality of telephone triage documentation - an analysis of triage documentation before and after computerized clinical decision support

    PubMed Central

    2014-01-01

    Background Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. Methods We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Results Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). Conclusions CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS

  13. Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

    NASA Technical Reports Server (NTRS)

    Duarte, Alberto

    2007-01-01

    Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

  14. A Conceptual Model for Multidimensional Analysis of Documents

    NASA Astrophysics Data System (ADS)

    Ravat, Franck; Teste, Olivier; Tournier, Ronan; Zurlfluh, Gilles

    Data warehousing and OLAP are mainly used for the analysis of transactional data. Nowadays, with the evolution of Internet, and the development of semi-structured data exchange format (such as XML), it is possible to consider entire fragments of data such as documents as analysis sources. As a consequence, an adapted multidimensional analysis framework needs to be provided. In this paper, we introduce an OLAP multidimensional conceptual model without facts. This model is based on the unique concept of dimensions and is adapted for multidimensional document analysis. We also provide a set of manipulation operations.

  15. [Patient safety in home care - A review of international recommendations].

    PubMed

    Czakert, Judith; Lehmann, Yvonne; Ewers, Michael

    2018-06-08

    In recent years there has been a growing trend towards nursing care at home in general as well as towards intensive home care being provided by specialized home care services in Germany. However, resulting challenges for patient safety have rarely been considered. Against this background we aimed to explore whether international recommendations for patient safety in home care in general and in intensive home care in particular already exist and how they can stimulate further practice development in Germany. A review of online English documents containing recommendations for patient safety in intensive home care was conducted. Available documents were analyzed and compared in terms of their form and content. Overall, a small number of relevant documents could be identified. None of these documents exclusively refer to the intensive home care sector. Despite their differences, however, the analysis of four selected documents showed similarities, e. g., regarding specific topics of patient safety (communication, involvement of patients and their relatives, risk assessment, medication management, qualification). Furthermore, strengths and weaknesses of the documents became apparent: e. g., an explicit understanding of patient safety, a literature-based introduction to safety topics or an adaptation of the recommendations to the specific features of home care were occasionally lacking. This document analysis provides interesting input to the formal and content-related development of specific recommendations and to practice development in Germany to improve patient safety in home care. Copyright © 2018. Published by Elsevier GmbH.

  16. Making Patient Risk Visible: Implementation of a Nursing Document Information System to Improve Patient Safety.

    PubMed

    Wang, Panfeng; Zhang, Hongjun; Li, Baohua; Lin, Keke

    2016-01-01

    The aims of this study were to develop a nursing information system (NIS), enhance the visibility of patient risk, and identify challenges and facilitators to adoption of the NIS risk assessment system for nurse leaders. This article describes the function of a nursing risk assessment information system, and the results of a survey on the risk assessment system. The results suggested that quality of information processing in nursing significantly improved patient safety. Nurses surveyed demonstrated a high degree of satisfaction, with saving time and improving safety. The nursing document information system described was introduced to improve patient safety and decrease risk. The application of the system has greatly enhanced the efficiency of nursing work, and guides the nurses to make an accurate, comprehensive and objective assessment of patient information, contributing significantly to further improvement in care standards and care decisions.

  17. Nuclear Safety

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silver, E G

    This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  18. School Survey on Crime and Safety (SSOCS) 2000 Public-Use Data Files, User's Manual, and Detailed Data Documentation. [CD-ROM].

    ERIC Educational Resources Information Center

    National Center for Education Statistics (ED), Washington, DC.

    This CD-ROM contains the raw, public-use data from the 2000 School Survey on Crime and Safety (SSOCS) along with a User's Manual and Detailed Data Documentation. The data are provided in SAS, SPSS, STATA, and ASCII formats. The User's Manual and the Detailed Data Documentation are provided as .pdf files. (Author)

  19. Safety analysis, risk assessment, and risk acceptance criteria

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jamali, K.; Stack, D.W.; Sullivan, L.H.

    1997-08-01

    This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities andmore » that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, `ensuring` plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is `safe.` Use of RACs requires quantitative estimates of consequence frequency and magnitude.« less

  20. Information Extraction for System-Software Safety Analysis: Calendar Year 2008 Year-End Report

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.

    2009-01-01

    This annual report describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

  1. Planning, Conducting, and Documenting Data Analysis for Program Improvement

    ERIC Educational Resources Information Center

    Winer, Abby; Taylor, Cornelia; Derrington, Taletha; Lucas, Anne

    2015-01-01

    This 2015 document was developed to help technical assistance (TA) providers and state staff define and limit the scope of data analysis for program improvement efforts, including the State Systemic Improvement Plan (SSIP); develop a plan for data analysis; document alternative hypotheses and additional analyses as they are generated; and…

  2. [Written information for patients: From papers to documents].

    PubMed

    Cortés-Criado, M C

    2014-01-01

    There is a high variability in the level of information intended for patients, with different content, format and presentation. To determine the perceived safety of the patients treated at the Country Hospital of Melilla (HCML) and to assess the quality of the documents using criteria adapted to the «International Patient Decision Aid Standards» (IPDAS). Descriptive study of the documents given to patients by the HCML. They included questionnaires on perceived safety, classification of the documents, and the level of adherence to the IPDAS criteria. The Information given to patients during their stay in the HCML, their participation in decision-making, and the information about medication, did not exceed the average on the acceptance scale. Only 40 documents were studied (of the 131 collected), on being published in-house, and were classified, following the definitions of the RAE, into instructions (20), recommendations (14) and guidelines (6). Of these, only the 27.5% showed hospital logo. In the content analysis according to the IPDAS criteria, there was an overall adherence rate of 24.1% in instructions, 24.8% in recommendations, and 61.5% in guidelines. The perception of patient safety expressed in the questionnaire, and its assessment according IPDAS criteria, shows there may be a significant improvement within the organization. Furthermore, the quality of patient documentation provided can help decision making. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

  3. Page layout analysis and classification for complex scanned documents

    NASA Astrophysics Data System (ADS)

    Erkilinc, M. Sezer; Jaber, Mustafa; Saber, Eli; Bauer, Peter; Depalov, Dejan

    2011-09-01

    A framework for region/zone classification in color and gray-scale scanned documents is proposed in this paper. The algorithm includes modules for extracting text, photo, and strong edge/line regions. Firstly, a text detection module which is based on wavelet analysis and Run Length Encoding (RLE) technique is employed. Local and global energy maps in high frequency bands of the wavelet domain are generated and used as initial text maps. Further analysis using RLE yields a final text map. The second module is developed to detect image/photo and pictorial regions in the input document. A block-based classifier using basis vector projections is employed to identify photo candidate regions. Then, a final photo map is obtained by applying probabilistic model based on Markov random field (MRF) based maximum a posteriori (MAP) optimization with iterated conditional mode (ICM). The final module detects lines and strong edges using Hough transform and edge-linkages analysis, respectively. The text, photo, and strong edge/line maps are combined to generate a page layout classification of the scanned target document. Experimental results and objective evaluation show that the proposed technique has a very effective performance on variety of simple and complex scanned document types obtained from MediaTeam Oulu document database. The proposed page layout classifier can be used in systems for efficient document storage, content based document retrieval, optical character recognition, mobile phone imagery, and augmented reality.

  4. Guidance on health effects of toxic chemicals. Safety Analysis Report Update Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Foust, C.B.; Griffin, G.D.; Munro, N.B.

    1994-02-01

    Martin Marietta Energy Systems, Inc. (MMES), and Martin Marietta Utility Services, Inc. (MMUS), are engaged in phased programs to update the safety documentation for the existing US Department of Energy (DOE)-owned facilities. The safety analysis of potential toxic hazards requires a methodology for evaluating human health effects of predicted toxic exposures. This report provides a consistent set of health effects and documents toxicity estimates corresponding to these health effects for some of the more important chemicals found within MMES and MMUS. The estimates are based on published toxicity information and apply to acute exposures for an ``average`` individual. The healthmore » effects (toxicological endpoints) used in this report are (1) the detection threshold; (2) the no-observed adverse effect level; (3) the onset of irritation/reversible effects; (4) the onset of irreversible effects; and (5) a lethal exposure, defined to be the 50% lethal level. An irreversible effect is defined as a significant effect on a person`s quality of life, e.g., serious injury. Predicted consequences are evaluated on the basis of concentration and exposure time.« less

  5. Artificial neural networks for document analysis and recognition.

    PubMed

    Marinai, Simone; Gori, Marco; Soda, Giovanni; Society, Computer

    2005-01-01

    Artificial neural networks have been extensively applied to document analysis and recognition. Most efforts have been devoted to the recognition of isolated handwritten and printed characters with widely recognized successful results. However, many other document processing tasks, like preprocessing, layout analysis, character segmentation, word recognition, and signature verification, have been effectively faced with very promising results. This paper surveys the most significant problems in the area of offline document image processing, where connectionist-based approaches have been applied. Similarities and differences between approaches belonging to different categories are discussed. A particular emphasis is given on the crucial role of prior knowledge for the conception of both appropriate architectures and learning algorithms. Finally, the paper provides a critical analysis on the reviewed approaches and depicts the most promising research guidelines in the field. In particular, a second generation of connectionist-based models are foreseen which are based on appropriate graphical representations of the learning environment.

  6. L-Band Digital Aeronautical Communications System Engineering - Initial Safety and Security Risk Assessment and Mitigation

    NASA Technical Reports Server (NTRS)

    Zelkin, Natalie; Henriksen, Stephen

    2011-01-01

    This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents a preliminary safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the L-band communication system after the technology is chosen and system rollout timing is determined. The security risk analysis resulted in identifying main security threats to the proposed system as well as noting additional threats recommended for a future security analysis conducted at a later stage in the system development process. The document discusses various security controls, including those suggested in the COCR Version 2.0.

  7. Juggling confidentiality and safety: a qualitative study of how general practice clinicians document domestic violence in families with children.

    PubMed

    Drinkwater, Jessica; Stanley, Nicky; Szilassy, Eszter; Larkins, Cath; Hester, Marianne; Feder, Gene

    2017-06-01

    Domestic violence and abuse (DVA) and child safeguarding are interlinked problems, impacting on all family members. Documenting in electronic patient records (EPRs) is an important part of managing these families. Current evidence and guidance, however, treats DVA and child safeguarding separately. This does not reflect the complexity clinicians face when documenting both issues in one family. To explore how and why general practice clinicians document DVA in families with children. A qualitative interview study using vignettes with GPs and practice nurses (PNs) in England. Semi-structured telephone interviews with 54 clinicians (42 GPs and 12 PNs) were conducted across six sites in England. Data were analysed thematically using a coding frame incorporating concepts from the literature and emerging themes. Most clinicians recognised DVA and its impact on child safeguarding, but struggled to work out the best way to document it. They described tensions among the different roles of the EPR: a legal document; providing continuity of care; information sharing to improve safety; and a patient-owned record. This led to strategies to hide information, so that it was only available to other clinicians. Managing DVA in families with children is complex and challenging for general practice clinicians. National integrated guidance is urgently needed regarding how clinicians should manage the competing roles of the EPR, while maintaining safety of the whole family, especially in the context of online EPRs and patient access. © British Journal of General Practice 2017.

  8. Juggling confidentiality and safety: a qualitative study of how general practice clinicians document domestic violence in families with children

    PubMed Central

    Drinkwater, Jessica; Stanley, Nicky; Szilassy, Eszter; Larkins, Cath; Hester, Marianne; Feder, Gene

    2017-01-01

    Background Domestic violence and abuse (DVA) and child safeguarding are interlinked problems, impacting on all family members. Documenting in electronic patient records (EPRs) is an important part of managing these families. Current evidence and guidance, however, treats DVA and child safeguarding separately. This does not reflect the complexity clinicians face when documenting both issues in one family. Aim To explore how and why general practice clinicians document DVA in families with children. Design and setting A qualitative interview study using vignettes with GPs and practice nurses (PNs) in England. Method Semi-structured telephone interviews with 54 clinicians (42 GPs and 12 PNs) were conducted across six sites in England. Data were analysed thematically using a coding frame incorporating concepts from the literature and emerging themes. Results Most clinicians recognised DVA and its impact on child safeguarding, but struggled to work out the best way to document it. They described tensions among the different roles of the EPR: a legal document; providing continuity of care; information sharing to improve safety; and a patient-owned record. This led to strategies to hide information, so that it was only available to other clinicians. Conclusion Managing DVA in families with children is complex and challenging for general practice clinicians. National integrated guidance is urgently needed regarding how clinicians should manage the competing roles of the EPR, while maintaining safety of the whole family, especially in the context of online EPRs and patient access. PMID:28137783

  9. Nuclear Criticality Safety Data Book

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hollenbach, D. F.

    The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

  10. High-level waste tank farm set point document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREASmore » listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.« less

  11. C-Band Airport Surface Communications System Engineering-Initial High-Level Safety Risk Assessment and Mitigation

    NASA Technical Reports Server (NTRS)

    Zelkin, Natalie; Henriksen, Stephen

    2011-01-01

    This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.

  12. Analysis of line structure in handwritten documents using the Hough transform

    NASA Astrophysics Data System (ADS)

    Ball, Gregory R.; Kasiviswanathan, Harish; Srihari, Sargur N.; Narayanan, Aswin

    2010-01-01

    In the analysis of handwriting in documents a central task is that of determining line structure of the text, e.g., number of text lines, location of their starting and end-points, line-width, etc. While simple methods can handle ideal images, real world documents have complexities such as overlapping line structure, variable line spacing, line skew, document skew, noisy or degraded images etc. This paper explores the application of the Hough transform method to handwritten documents with the goal of automatically determining global document line structure in a top-down manner which can then be used in conjunction with a bottom-up method such as connected component analysis. The performance is significantly better than other top-down methods, such as the projection profile method. In addition, we evaluate the performance of skew analysis by the Hough transform on handwritten documents.

  13. 43 CFR 46.135 - Incorporation of referenced documents into NEPA analysis.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the analysis at hand. (b) Citations of specific information or analysis from other source documents... NEPA analysis. 46.135 Section 46.135 Public Lands: Interior Office of the Secretary of the Interior... Quality § 46.135 Incorporation of referenced documents into NEPA analysis. (a) The Responsible Official...

  14. 43 CFR 46.135 - Incorporation of referenced documents into NEPA analysis.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the analysis at hand. (b) Citations of specific information or analysis from other source documents... NEPA analysis. 46.135 Section 46.135 Public Lands: Interior Office of the Secretary of the Interior... Quality § 46.135 Incorporation of referenced documents into NEPA analysis. (a) The Responsible Official...

  15. 43 CFR 46.135 - Incorporation of referenced documents into NEPA analysis.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the analysis at hand. (b) Citations of specific information or analysis from other source documents... NEPA analysis. 46.135 Section 46.135 Public Lands: Interior Office of the Secretary of the Interior... Quality § 46.135 Incorporation of referenced documents into NEPA analysis. (a) The Responsible Official...

  16. 43 CFR 46.135 - Incorporation of referenced documents into NEPA analysis.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the analysis at hand. (b) Citations of specific information or analysis from other source documents... NEPA analysis. 46.135 Section 46.135 Public Lands: Interior Office of the Secretary of the Interior... Quality § 46.135 Incorporation of referenced documents into NEPA analysis. (a) The Responsible Official...

  17. 43 CFR 46.135 - Incorporation of referenced documents into NEPA analysis.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the analysis at hand. (b) Citations of specific information or analysis from other source documents... NEPA analysis. 46.135 Section 46.135 Public Lands: Interior Office of the Secretary of the Interior... Quality § 46.135 Incorporation of referenced documents into NEPA analysis. (a) The Responsible Official...

  18. An investigation and analysis of safety issues in Polish small construction plants.

    PubMed

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety.

  19. An investigation and analysis of safety issues in Polish small construction plants

    PubMed Central

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety. PMID:26694002

  20. Safety and Performance Analysis of the Non-Radar Oceanic/Remote Airspace In-Trail Procedure

    NASA Technical Reports Server (NTRS)

    Carreno, Victor A.; Munoz, Cesar A.

    2007-01-01

    This document presents a safety and performance analysis of the nominal case for the In-Trail Procedure (ITP) in a non-radar oceanic/remote airspace. The analysis estimates the risk of collision between the aircraft performing the ITP and a reference aircraft. The risk of collision is only estimated for the ITP maneuver and it is based on nominal operating conditions. The analysis does not consider human error, communication error conditions, or the normal risk of flight present in current operations. The hazards associated with human error and communication errors are evaluated in an Operational Hazards Analysis presented elsewhere.

  1. Fire safety in transit systems fault tree analysis

    DOT National Transportation Integrated Search

    1981-09-01

    Fire safety countermeasures applicable to transit vehicles are identified and evaluated. This document contains fault trees which illustrate the sequences of events which may lead to a transit-fire related casualty. A description of the basis for the...

  2. Analysis of a document/reporting system

    NASA Technical Reports Server (NTRS)

    Narrow, B.

    1971-01-01

    An in-depth analysis of the information system within the Data Processing Branch is presented. Quantitative measures are used to evaluate the efficiency and effectiveness of the information system. It is believed that this is the first documented study which utilizes quantitative measures for full scale system analysis. The quantitative measures and techniques for collecting and qualifying the basic data, as described, are applicable to any information system. Therefore this report is considered to be of interest to any persons concerned with the management design, analysis or evaluation of information systems.

  3. Content Recognition and Context Modeling for Document Analysis and Retrieval

    ERIC Educational Resources Information Center

    Zhu, Guangyu

    2009-01-01

    The nature and scope of available documents are changing significantly in many areas of document analysis and retrieval as complex, heterogeneous collections become accessible to virtually everyone via the web. The increasing level of diversity presents a great challenge for document image content categorization, indexing, and retrieval.…

  4. Traceability of Software Safety Requirements in Legacy Safety Critical Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.

    2007-01-01

    How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

  5. Transportation systems safety hazard analysis tool (SafetyHAT) user guide (version 1.0)

    DOT National Transportation Integrated Search

    2014-03-24

    This is a user guide for the transportation system Safety Hazard Analysis Tool (SafetyHAT) Version 1.0. SafetyHAT is a software tool that facilitates System Theoretic Process Analysis (STPA.) This user guide provides instructions on how to download, ...

  6. Waste Sampling & Characterization Facility (WSCF) Complex Safety Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MELOY, R.T.

    2002-04-01

    This document was prepared to analyze the Waste Sampling and Characterization Facility for safety consequences by: Determining radionuclide and highly hazardous chemical inventories; Comparing these inventories to the appropriate regulatory limits; Documenting the compliance status with respect to these limits; and Identifying the administrative controls necessary to maintain this status. The primary purpose of the Waste Sampling and Characterization Facility (WSCF) is to perform low-level radiological and chemical analyses on various types of samples taken from the Hanford Site. These analyses will support the fulfillment of federal, Washington State, and Department of Energy requirements.

  7. Spectrum analysis on quality requirements consideration in software design documents.

    PubMed

    Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

    2013-12-01

    Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

  8. 16 CFR 1203.3 - Referenced documents.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Referenced documents. 1203.3 Section 1203.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... international standard, it has become a consensus national standard because all recent major voluntary standards...

  9. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  10. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  11. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  12. Full-scale system impact analysis: Digital document storage project

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The Digital Document Storage Full Scale System can provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The desired functionality of the DDS system is highly dependent on the assumed requirements for remote access used in this Impact Analysis. It is highly recommended that NASA proceed with a phased, communications requirement analysis to ensure that adequate communications service can be supplied at a reasonable cost in order to validate recent working assumptions upon which the success of the DDS Full Scale System is dependent.

  13. Directory of aerospace safety specialized information sources

    NASA Technical Reports Server (NTRS)

    Fullerton, E. A.; Rubens, L. S.; Mandel, G.; Mckenna, P. J.

    1974-01-01

    Directory aids safety specialists in locating information sources and individual experts in engineering-related fields. Lists 170 organizations and approximately 300 individuals who can provide safety-related technical information in form of documentation, data, and consulting expertise. Information on hazard and failure cause identification, accident analysis, and materials characteristics are covered.

  14. Deep Borehole Disposal Safety Analysis.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Freeze, Geoffrey A.; Stein, Emily; Price, Laura L.

    This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept.more » It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.« less

  15. Policies on Protecting Vulnerable People During Disasters in Iran: A Document Analysis

    PubMed Central

    Abbasi Dolatabadi, Zahra; Seyedin, Hesam; Aryankhesal, Aidin

    2016-01-01

    Context Developing official protection policies for disasters is a main strategy in protecting vulnerable people. The aim of this study was to analyze official documents concerning policies on protecting vulnerable people during disasters. Evidence Acquisition This study was conducted by the qualitative document analysis method. Documents were gathered by searching websites and referring to the organizations involved in disaster management. The documents were assessed by a researcher-made data collection form. A directed content analysis approach was used to analyze the retrieved documents regarding the protection policies and legislation for vulnerable people. Results A total of 22 documents were included in the final analysis. Most of the documents referred to women, children, elderly people, poor, and villagers as vulnerable people. Moreover, the documents did not provide information regarding official measures for protecting vulnerable people during different phases of disaster management. Conclusions A clear and comprehensive definition of “vulnerable people” and formulation of official policies to protect them is needs to be formulated. Given the high prevalence of disasters in Iran, policy makers need to develop effective context-based policies to protect vulnerable people during disasters. PMID:27921019

  16. System safety engineering analysis handbook

    NASA Technical Reports Server (NTRS)

    Ijams, T. E.

    1972-01-01

    The basic requirements and guidelines for the preparation of System Safety Engineering Analysis are presented. The philosophy of System Safety and the various analytic methods available to the engineering profession are discussed. A text-book description of each of the methods is included.

  17. Firefighter safety: rampant unsafe practices as documented in mainstream media.

    PubMed

    Kahn, Steven A; Woods, Jason; Sipes, Jan C; Toscano, Nicole; Bell, Derek E

    2014-01-01

    More than 30,000 firefighters are injured on the fireground each year. Literature suggests that injury often occurs when protective gear is not used properly. According to firefighters, failure to correctly wear protective equipment occurs for several reasons: (1) gear not used because of haste, (2) cumbersome gear can sometimes interfere with performance, and (3) cultural factors. The purpose of this study is to quantify improper gear and tactic use in a publicly available, online video repository in order to better understand unsafe firefighting. This was an Institutional Review Board-exempt study of public video records. A search for "fire fighting videos" was conducted at YouTube (www.youtube.com). The first 50 videos that contained volunteer or career firefighters at work fighting fires were selected evaluated for appropriate use of personal protective equipment and for safe behavior. The videos were evaluated by two highly experienced professional firefighters. Of the 50 videos reviewed, 25 (50%) demonstrated violations of firefighting safety principles. Of the unsafe videos, 21 (42%) displayed firefighters improperly using gear, while the other 4 (8%) were related to unsound tactics. The most common problem was failure to wear or properly secure a self-contained breathing apparatus when appropriate (14 videos or 28%). The second most common failure was lack of helmet, hood, or approved gloves (11 videos or 22%). In conclusion, firefighting as documented on YouTube is often unsafe because of failure to properly use personal protective equipment. Half of the videos reviewed contained unsafe practices. With such a shockingly high rate of unsafe firefighting, the profession is in need of additional education and reform. In response to this epidemic, a multidisciplinary educational program has been developed to improve firefighter awareness of gear limitations and burn injury risk. Effectiveness of educational programs should be documented in additional

  18. Additional nuclear criticality safety calculations for small-diameter containers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hone, M.J.

    This report documents additional criticality safety analysis calculations for small diameter containers, which were originally documented in Reference 1. The results in Reference 1 indicated that some of the small diameter containers did not meet the criteria established for criticality safety at the Portsmouth facility (K{sub eff} +2{sigma}<.95) when modeled under various contingency assumptions of reflection and moderation. The calculations performed in this report reexamine those cases which did not meet the criticality safety criteria. In some cases, unnecessary conservatism is removed, and in other cases mass or assay limits are established for use with the respective containers.

  19. SRB Safety Analysis

    NASA Image and Video Library

    2003-09-11

    Jeff Thon, an SRB mechanic with United Space Alliance, is lowered into a mockup of a segment of a solid rocket booster. He is testing a technique for vertical SRB propellant grain inspection. The inspection of segments is required as part of safety analysis.

  20. Third Annual Symposium on Document Analysis and Information Retrieval

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    This document presents papers of the Third Annual Symposium on Document Analysis and Information Retrieval at the Information Science Research-l Institute at the University of Nevada, Las Vegas (UNLV/ISRI). Of the 60 papers submitted, 25 were accepted for oral presentation and 9 as poster papers. Both oral presentations and poster papers are included in these Proceedings. The individual papers have been cataloged separately.

  1. Infusing Reliability Techniques into Software Safety Analysis

    NASA Technical Reports Server (NTRS)

    Shi, Ying

    2015-01-01

    Software safety analysis for a large software intensive system is always a challenge. Software safety practitioners need to ensure that software related hazards are completely identified, controlled, and tracked. This paper discusses in detail how to incorporate the traditional reliability techniques into the entire software safety analysis process. In addition, this paper addresses how information can be effectively shared between the various practitioners involved in the software safety analyses. The author has successfully applied the approach to several aerospace applications. Examples are provided to illustrate the key steps of the proposed approach.

  2. RDS - A systematic approach towards system thermal hydraulics input code development for a comprehensive deterministic safety analysis

    NASA Astrophysics Data System (ADS)

    Salim, Mohd Faiz; Roslan, Ridha; Ibrahim, Mohd Rizal Mamat @

    2014-02-01

    Deterministic Safety Analysis (DSA) is one of the mandatory requirements conducted for Nuclear Power Plant licensing process, with the aim of ensuring safety compliance with relevant regulatory acceptance criteria. DSA is a technique whereby a set of conservative deterministic rules and requirements are applied for the design and operation of facilities or activities. Computer codes are normally used to assist in performing all required analysis under DSA. To ensure a comprehensive analysis, the conduct of DSA should follow a systematic approach. One of the methodologies proposed is the Standardized and Consolidated Reference Experimental (and Calculated) Database (SCRED) developed by University of Pisa. Based on this methodology, the use of Reference Data Set (RDS) as a pre-requisite reference document for developing input nodalization was proposed. This paper shall describe the application of RDS with the purpose of assessing its effectiveness. Two RDS documents were developed for an Integral Test Facility of LOBI-MOD2 and associated Test A1-83. Data and information from various reports and drawings were referred in preparing the RDS. The results showed that by developing RDS, it has made possible to consolidate all relevant information in one single document. This is beneficial as it enables preservation of information, promotes quality assurance, allows traceability, facilitates continuous improvement, promotes solving of contradictions and finally assisting in developing thermal hydraulic input regardless of whichever code selected. However, some disadvantages were also recognized such as the need for experience in making engineering judgments, language barrier in accessing foreign information and limitation of resources. Some possible improvements are suggested to overcome these challenges.

  3. 49 CFR 237.155 - Documents and records.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Documentation, Records, and Audits of Bridge Management Programs § 237.155 Documents and records. Each track owner required to implement a bridge management... 49 Transportation 4 2012-10-01 2012-10-01 false Documents and records. 237.155 Section 237.155...

  4. 29 CFR 1905.7 - Form of documents; subscription; copies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... UNDER THE WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1905.7 Form of documents... 29 Labor 5 2010-07-01 2010-07-01 false Form of documents; subscription; copies. 1905.7 Section 1905.7 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

  5. Documentation: Records and Reports.

    PubMed

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  6. Concept analysis of safety climate in healthcare providers.

    PubMed

    Lin, Ying-Siou; Lin, Yen-Chun; Lou, Meei-Fang

    2017-06-01

    To report an analysis of the concept of safety climate in healthcare providers. Compliance with safe work practices is essential to patient safety and care outcomes. Analysing the concept of safety climate from the perspective of healthcare providers could improve understanding of the correlations between safety climate and healthcare provider compliance with safe work practices, thus enhancing quality of patient care. Concept analysis. The electronic databases of CINAHL, MEDLINE, PubMed and Web of Science were searched for literature published between 1995-2015. Searches used the keywords 'safety climate' or 'safety culture' with 'hospital' or 'healthcare'. The concept analysis method of Walker and Avant analysed safety climate from the perspective of healthcare providers. Three attributes defined how healthcare providers define safety climate: (1) creation of safe working environment by senior management in healthcare organisations; (2) shared perception of healthcare providers about safety of their work environment; and (3) the effective dissemination of safety information. Antecedents included the characteristics of healthcare providers and healthcare organisations as a whole, and the types of work in which they are engaged. Consequences consisted of safety performance and safety outcomes. Most studies developed and assessed the survey tools of safety climate or safety culture, with a minority consisting of interventional measures for improving safety climate. More prospective studies are needed to create interventional measures for improving safety climate of healthcare providers. This study is provided as a reference for use in developing multidimensional safety climate assessment tools and interventional measures. The values healthcare teams emphasise with regard to safety can serve to improve safety performance. Having an understanding of the concept of and interventional measures for safety climate allows healthcare providers to ensure the safety of their

  7. Interchange Safety Analysis Tool (ISAT) : user manual

    DOT National Transportation Integrated Search

    2007-06-01

    This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...

  8. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice; Baggs, Rhoda

    2007-01-01

    Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

  9. 14 CFR 417.405 - Ground safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

  10. 14 CFR 417.405 - Ground safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

  11. 14 CFR 417.405 - Ground safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

  12. Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification

    NASA Technical Reports Server (NTRS)

    Merry, Carl M.; Tarpley, Ashley F.; Craig, A. Scott; Tartabini, Paul V.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle

    2011-01-01

    NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the process

  13. An analysis of electronic document management in oncology care.

    PubMed

    Poulter, Thomas; Gannon, Brian; Bath, Peter A

    2012-06-01

    In this research in progress, a reference model for the use of electronic patient record (EPR) systems in oncology is described. The model, termed CICERO, comprises technical and functional components, and emphasises usability, clinical safety and user acceptance. One of the functional components of the model-an electronic document and records management (EDRM) system-is monitored in the course of its deployment at a leading oncology centre in the UK. Specifically, the user requirements and design of the EDRM solution are described.The study is interpretative and forms part a wider research programme to define and validate the CICERO model. Preliminary conclusions confirm the importance of a socio-technical perspective in Onco-EPR system design.

  14. Every document and picture tells a story: using internal corporate document reviews, semiotics, and content analysis to assess tobacco advertising.

    PubMed

    Anderson, S J; Dewhirst, T; Ling, P M

    2006-06-01

    In this article we present communication theory as a conceptual framework for conducting documents research on tobacco advertising strategies, and we discuss two methods for analysing advertisements: semiotics and content analysis. We provide concrete examples of how we have used tobacco industry documents archives and tobacco advertisement collections iteratively in our research to yield a synergistic analysis of these two complementary data sources. Tobacco promotion researchers should consider adopting these theoretical and methodological approaches.

  15. Forensic document analysis using scanning microscopy

    NASA Astrophysics Data System (ADS)

    Shaffer, Douglas K.

    2009-05-01

    The authentication and identification of the source of a printed document(s) can be important in forensic investigations involving a wide range of fraudulent materials, including counterfeit currency, travel and identity documents, business and personal checks, money orders, prescription labels, travelers checks, medical records, financial documents and threatening correspondence. The physical and chemical characterization of document materials - including paper, writing inks and printed media - is becoming increasingly relevant for law enforcement agencies, with the availability of a wide variety of sophisticated commercial printers and copiers which are capable of producing fraudulent documents of extremely high print quality, rendering these difficult to distinguish from genuine documents. This paper describes various applications and analytical methodologies using scanning electron miscoscopy/energy dispersive (x-ray) spectroscopy (SEM/EDS) and related technologies for the characterization of fraudulent documents, and illustrates how their morphological and chemical profiles can be compared to (1) authenticate and (2) link forensic documents with a common source(s) in their production history.

  16. Safety and Efficacy of Methotrexate in Psoriasis: A Meta-Analysis of Published Trials

    PubMed Central

    West, Jonathan; Ogston, Simon; Foerster, John

    2016-01-01

    Background Methotrexate (MTX) has been used to treat psoriasis for over half a century. Even so, clinical data characterising its efficacy and safety are sparse. Objective In order to enhance the available evidence, we conducted two meta-analyses, one for efficacy and one for safety outcomes, respectively, according to PRISMA checklist. (Data sources, study criteria, and study synthesis methods are detailed in Methods). Results In terms of efficacy, only eleven studies met criteria for study design and passed a Cochrane risk of bias analysis. Based on this limited dataset, 45.2% [95% confidence interval 34.1–60.0] of patients achieve PASI75 at primary endpoint (12 or 16 weeks, respectively, n = 705 patients across all studies), compared to a calculated PASI75 of 4.4 [3.5–5.6] for placebo, yielding a relative risk of 10.2 [95% C.I. 7.1–14.7]. For safety outcomes, we extended the meta-analysis to include studies employing the same dose range of MTX for other chronic inflammatory conditions, e.g. rheumatoid arthritis, in order not to maximise capture of relevant safety data. Based on 2763 patient safety years, adverse events (AEs) were found treatment limiting in 6.9 ± 1.4% (mean ± s.e.) of patients treated for six months, with an adverse effect profile largely in line with that encountered in clinical practice. Finally, in order to facilitate prospective clinical audit and to help generate long-term treatment outcomes under real world conditions, we also developed an easy to use documentation form to be completed by patients without requirement for additional staff time. Limitations Meta-analyses for efficacy and safety, respectively, employed non-identical selection criteria. Conclusions These meta-analyses summarise currently available evidence on MTX in psoriasis and should be of use to gauge whether local results broadly fall within outcomes. PMID:27168193

  17. Every document and picture tells a story: using internal corporate document reviews, semiotics, and content analysis to assess tobacco advertising

    PubMed Central

    Anderson, S J; Dewhirst, T; Ling, P M

    2006-01-01

    In this article we present communication theory as a conceptual framework for conducting documents research on tobacco advertising strategies, and we discuss two methods for analysing advertisements: semiotics and content analysis. We provide concrete examples of how we have used tobacco industry documents archives and tobacco advertisement collections iteratively in our research to yield a synergistic analysis of these two complementary data sources. Tobacco promotion researchers should consider adopting these theoretical and methodological approaches. PMID:16728758

  18. Communications data delivery system analysis : public workshop read-ahead document.

    DOT National Transportation Integrated Search

    2012-04-09

    This document presents an overview of work conducted to date around development and analysis of communications data delivery systems for supporting transactions in the connected vehicle environment. It presents the results of technical analysis of co...

  19. A simple 3-day "rush" venom immunotherapy protocol: documentation of safety.

    PubMed

    Kalogeromitros, D; Makris, M; Koti, I; Chliva, C; Mellios, A; Avgerinou, G; Theoharides, T C

    2010-01-01

    Venom immunotherapy (VIT) is the only effective treatment for hymenoptera hypersensitivity, but conventional protocols require a few weeks. We present the safety of a 3-day "rush" protocol that requires only 7 injections and 255 mgr cumulative dose before the 100 microg maintenance dose. Forty-nine patients (33 males, 16 females) of mean age 43.57+/-12.9 yrs received "rush" VIT. Only 7 injections were required until the maintenance dose of 100 mgr was reached on Day 5. On Day 1, four injections were administered with initial dose of 5 mgr and total dose of 75 microg. On Day 3 a cumulative dose of 180 mgr was administered in three injections (40 mgr, 60 mgr and 80 mgr). A dose of 100 mgr was administered on Day 5. Twenty-nine individuals were treated with Honey-Bee venom; 18 with Common wasp; 5 with Paper Wasp; while 13 patients received Mixed Vespid preparation. Inclusion criteria were documented IgE-mediated allergy with intradermal sensitivity to < or =0.1 mgr/ml venom concentration and concomitant detection of specific venom IgE > or =0.35 kU/l. All patients reached the maintenance dose. Forty-nine patients received 65 immunotherapy courses, resulting in 1520 injections. Thirty-three systemic reactions: 7 during building phase (1.5%); and 26 in the maintenance dose (2.4%) were observed in 9 patients. The percentage of reactions/total injection number was 2.2%; all reactions were mild-to-moderate. Fourteen patients reported documented field stings at least two months after VIT onset with only one reported mild systemic reaction. We propose a simple "rush" VIT protocol in an outpatient setting as an easy-to-perform alternative option for VIT induction phase. Copyright 2009 SEICAP. Published by Elsevier Espana. All rights reserved.

  20. Systems Analysis of NASA Aviation Safety Program: Final Report

    NASA Technical Reports Server (NTRS)

    Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

    2013-01-01

    A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

  1. Information Services at the Nuclear Safety Analysis Center.

    ERIC Educational Resources Information Center

    Simard, Ronald

    This paper describes the operations of the Nuclear Safety Analysis Center. Established soon after an accident at the Three Mile Island nuclear power plant near Harrisburg, Pennsylvania, its efforts were initially directed towards a detailed analysis of the accident. Continuing functions include: (1) the analysis of generic nuclear safety issues,…

  2. A Document Analysis of Teacher Evaluation Systems Specific to Physical Education

    ERIC Educational Resources Information Center

    Norris, Jason M.; van der Mars, Hans; Kulinna, Pamela; Kwon, Jayoun; Amrein-Beardsley, Audrey

    2017-01-01

    Purpose: The purpose of this document analysis study was to examine current teacher evaluation systems, understand current practices, and determine whether the instrumentation is a valid measure of teaching quality as reflected in teacher behavior and effectiveness specific to physical education (PE). Method: An interpretive document analysis…

  3. Meta-analysis of surgical safety checklist effects on teamwork, communication, morbidity, mortality, and safety.

    PubMed

    Lyons, Vanessa E; Popejoy, Lori L

    2014-02-01

    The purpose of this study is to examine the effectiveness of surgical safety checklists on teamwork, communication, morbidity, mortality, and compliance with safety measures through meta-analysis. Four meta-analyses were conducted on 19 studies that met the inclusion criteria. The effect size of checklists on teamwork and communication was 1.180 (p = .003), on morbidity and mortality was 0.123 (p = .003) and 0.088 (p = .001), respectively, and on compliance with safety measures was 0.268 (p < .001). The results indicate that surgical safety checklists improve teamwork and communication, reduce morbidity and mortality, and improve compliance with safety measures. This meta-analysis is limited in its generalizability based on the limited number of studies and the inclusion of only published research. Future research is needed to examine possible moderating variables for the effects of surgical safety checklists.

  4. 49 CFR 397.19 - Instructions and documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HAZARDOUS MATERIALS; DRIVING AND PARKING RULES General § 397.19 Instructions and documents. (a) A motor carrier that...

  5. Work zone safety analysis and modeling: a state-of-the-art review.

    PubMed

    Yang, Hong; Ozbay, Kaan; Ozturk, Ozgur; Xie, Kun

    2015-01-01

    Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for work zone safety. To address this deficit, this article aims to provide a comprehensive review of the existing extensive research efforts focused on work zone crash-related analysis and modeling, in the hopes of providing researchers and practitioners with a complete overview. Relevant literature published in the last 5 decades was retrieved from the National Work Zone Crash Information Clearinghouse and the Transport Research International Documentation database and other public digital libraries and search engines. Both peer-reviewed publications and research reports were obtained. Each study was carefully reviewed, and those that focused on either work zone crash data analysis or work zone safety modeling were identified. The most relevant studies are specifically examined and discussed in the article. The identified studies were carefully synthesized to understand the state of knowledge on work zone safety. Agreement and inconsistency regarding the characteristics of the work zone crashes discussed in the descriptive studies were summarized. Progress and issues about the current practices on work zone crash frequency and severity modeling are also explored and discussed. The challenges facing work zone safety research are then presented. The synthesis of the literature suggests that the presence of a work zone is likely to increase the crash rate. Crashes are not uniformly distributed within work zones and rear-end crashes are the most prevalent type of crashes in work zones. There was no across-the-board agreement among numerous papers reviewed on the relationship between work zone

  6. Restoration of recto-verso colour documents using correlated component analysis

    NASA Astrophysics Data System (ADS)

    Tonazzini, Anna; Bedini, Luigi

    2013-12-01

    In this article, we consider the problem of removing see-through interferences from pairs of recto-verso documents acquired either in grayscale or RGB modality. The see-through effect is a typical degradation of historical and archival documents or manuscripts, and is caused by transparency or seeping of ink from the reverse side of the page. We formulate the problem as one of separating two individual texts, overlapped in the recto and verso maps of the colour channels through a linear convolutional mixing operator, where the mixing coefficients are unknown, while the blur kernels are assumed known a priori or estimated off-line. We exploit statistical techniques of blind source separation to estimate both the unknown model parameters and the ideal, uncorrupted images of the two document sides. We show that recently proposed correlated component analysis techniques overcome the already satisfactory performance of independent component analysis techniques and colour decorrelation, when the two texts are even sensibly correlated.

  7. Safety and Health Training Resources.

    ERIC Educational Resources Information Center

    Federal Safety Advisory Council, Washington, DC.

    Information obtained from a survey of safety and health training activities undertaken by Federal agencies is provided in the document which serves as a resource guide and directory of agency safety programs. The document, intended to help Federal managers meet their safety training needs with available government resources, is divided into four…

  8. Improving tractor safety warnings: readability is missing.

    PubMed

    Tebeaux, E

    2010-07-01

    Research on tractor safety has not focused on user manuals. This study focuses on tractor operator manuals, specifically safety warnings, selected from the files of the Tractor Test facility at University of Nebraska-Lincoln. Analysis of many common warnings, based on readability and legibility research, shows that many warnings contain excessive information, confusing visuals and safety icons, poor document design, and illegible typefaces. The result is unreadable warnings that do not communicate quickly and correctly, and discourage readers rather than clarify critical information. Many tractor operator warnings are cluttered, "over-written," and contain information needed to protect the manufacturer rather than to inform operators. What is needed is a careful analysis and revision of many safety warnings with the goal of encouraging operators to read the warnings and follow their message.

  9. Old document image segmentation using the autocorrelation function and multiresolution analysis

    NASA Astrophysics Data System (ADS)

    Mehri, Maroua; Gomez-Krämer, Petra; Héroux, Pierre; Mullot, Rémy

    2013-01-01

    Recent progress in the digitization of heterogeneous collections of ancient documents has rekindled new challenges in information retrieval in digital libraries and document layout analysis. Therefore, in order to control the quality of historical document image digitization and to meet the need of a characterization of their content using intermediate level metadata (between image and document structure), we propose a fast automatic layout segmentation of old document images based on five descriptors. Those descriptors, based on the autocorrelation function, are obtained by multiresolution analysis and used afterwards in a specific clustering method. The method proposed in this article has the advantage that it is performed without any hypothesis on the document structure, either about the document model (physical structure), or the typographical parameters (logical structure). It is also parameter-free since it automatically adapts to the image content. In this paper, firstly, we detail our proposal to characterize the content of old documents by extracting the autocorrelation features in the different areas of a page and at several resolutions. Then, we show that is possible to automatically find the homogeneous regions defined by similar indices of autocorrelation without knowledge about the number of clusters using adapted hierarchical ascendant classification and consensus clustering approaches. To assess our method, we apply our algorithm on 316 old document images, which encompass six centuries (1200-1900) of French history, in order to demonstrate the performance of our proposal in terms of segmentation and characterization of heterogeneous corpus content. Moreover, we define a new evaluation metric, the homogeneity measure, which aims at evaluating the segmentation and characterization accuracy of our methodology. We find a 85% of mean homogeneity accuracy. Those results help to represent a document by a hierarchy of layout structure and content, and to

  10. 49 CFR 591.6 - Documents accompanying declarations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) IMPORTATION OF VEHICLES AND EQUIPMENT SUBJECT TO FEDERAL SAFETY, BUMPER AND THEFT PREVENTION STANDARDS § 591.6 Documents accompanying... public roads, or that the equipment item was not manufactured for use on a motor vehicle or is not an...

  11. Mission safety evaluation report for STS-35: Postflight edition

    NASA Technical Reports Server (NTRS)

    Hill, William C.; Finkel, Seymour I.

    1991-01-01

    Space Transportation System 35 (STS-35) safety risk factors that represent a change from previous flights that had an impact on this flight, and factors that were unique to this flight are discussed. While some changes to the safety risk baseline since the previous flight are included to highlight their significance in risk level change, the primary purpose is to insure that changes which were too late too include in formal changes through the Failure Modes and Effects Analysis/Critical Items List (FMEA/CIL) and Hazard Analysis process are documented along with the safety position, which includes the acceptance rationale.

  12. Demonstration of a Safety Analysis on a Complex System

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy; Alfaro, Liliana; Alvarado, Christine; Brown, Molly; Hunt, Earl B.; Jaffe, Matt; Joslyn, Susan; Pinnell, Denise; Reese, Jon; Samarziya, Jeffrey; hide

    1997-01-01

    For the past 17 years, Professor Leveson and her graduate students have been developing a theoretical foundation for safety in complex systems and building a methodology upon that foundation. The methodology includes special management structures and procedures, system hazard analyses, software hazard analysis, requirements modeling and analysis for completeness and safety, special software design techniques including the design of human-machine interaction, verification, operational feedback, and change analysis. The Safeware methodology is based on system safety techniques that are extended to deal with software and human error. Automation is used to enhance our ability to cope with complex systems. Identification, classification, and evaluation of hazards is done using modeling and analysis. To be effective, the models and analysis tools must consider the hardware, software, and human components in these systems. They also need to include a variety of analysis techniques and orthogonal approaches: There exists no single safety analysis or evaluation technique that can handle all aspects of complex systems. Applying only one or two may make us feel satisfied, but will produce limited results. We report here on a demonstration, performed as part of a contract with NASA Langley Research Center, of the Safeware methodology on the Center-TRACON Automation System (CTAS) portion of the air traffic control (ATC) system and procedures currently employed at the Dallas/Fort Worth (DFW) TRACON (Terminal Radar Approach CONtrol). CTAS is an automated system to assist controllers in handling arrival traffic in the DFW area. Safety is a system property, not a component property, so our safety analysis considers the entire system and not simply the automated components. Because safety analysis of a complex system is an interdisciplinary effort, our team included system engineers, software engineers, human factors experts, and cognitive psychologists.

  13. Analysis of Private Returns to Vocational Education and Training: Support Document

    ERIC Educational Resources Information Center

    Lee, Wang-Sheng; Coelli, Michael

    2010-01-01

    This document is an appendix that is meant to accompany the main report, "Analysis of Private Returns to Vocational Education and Training". Included here are the detailed regression results that correspond to Tables 4 to 59 of the main report. This document was produced by the authors based on their research for the main report, and is…

  14. 10 CFR 72.248 - Safety analysis report updating.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.248 Section 72.248 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF... Approval of Spent Fuel Storage Casks § 72.248 Safety analysis report updating. (a) Each certificate holder...

  15. Safety analysis report for the Galileo Mission. Volume 3, book 2: Nuclear risk analysis document. Appendices, revision 1

    NASA Astrophysics Data System (ADS)

    1989-01-01

    It is the purpose of the NRAD to provide an analysis of the range of potential consequences of accidents which have been identified that are associated with the launching and deployment of the Galileo mission spacecraft. The specific consequences analyzed are those associated with the possible release of radioactive material (fuel) of the Radioisotope Thermoelectric Generators (RTGs). They are in terms of radiation doses to people and areas of deposition of radioactive material. These consequence analyses can be used in several ways. One way is to identify the potential range of consequences which might have to be dealt with if there were to be an accident with a release of fuel, so as to assure that, given such an accident, the health and safety of the public will be reasonably protected. Another use of the information, in conjunction with accident and release probabilities, is to estimate the risks associated with the mission. That is, most space launches occur without incident. Given an accident, the most probable result relative to the RTGs is complete containment of the radioactive material. Only a small fraction of accidents might result in a release of fuel and subsequent radiological consequences. The combination of probability with consequence is risk, which can be compared to other human and societal risks to assure that no undue risks are implied by undertaking the mission. Book 2 contains eight appendices.

  16. Fluor Daniel Hanford contract standards/requirements identification document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bennett, G.L.

    1997-04-24

    This document, the Standards/Requirements Identification Document (S/RID) for the Fluor Daniel Hanford Contract, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment.

  17. NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

    NASA Technical Reports Server (NTRS)

    Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

    2003-01-01

    The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

  18. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  19. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  20. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  1. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  2. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  3. Defining attributes of patient safety through a concept analysis.

    PubMed

    Kim, Linda; Lyder, Courtney H; McNeese-Smith, Donna; Leach, Linda Searle; Needleman, Jack

    2015-11-01

    The aim of this study was to report an analysis of the concept of patient safety. Despite recent increase in the number of work being done to clarify the concept and standardize measurement of patient safety, there are still huge variations in how the term is conceptualized and how to measure patient safety data across various healthcare settings and in research. Concept analysis. A literature search was conducted through PubMed and Cumulative Index to Nursing and Allied Health Literature, Plus using the terms 'patient safety' in the title and 'concept analysis,' 'attributes' or 'definition' in the title and or abstract. All English language literature published between 2002-2014 were considered for the review. Walker and Avant's method guided this analysis. The defining attributes of patient safety include prevention of medical errors and avoidable adverse events, protection of patients from harm or injury and collaborative efforts by individual healthcare providers and a strong, well-integrated healthcare system. The application of Collaborative Alliance of Nursing Outcomes indicators as empirical referents would facilitate the measurement of patient safety. With the knowledge gained from this analysis, nurses may improve patient surveillance efforts that identify potential hazards before they become adverse events and have a stronger voice in health policy decision-making that influence implementation efforts aimed at promoting patient safety, worldwide. Further studies are needed on development of a conceptual model and framework that can aid with collection and measurement of standardized patient safety data. © 2015 John Wiley & Sons Ltd.

  4. Guidelines for economic analysis of pharmaceutical products: a draft document for Ontario and Canada.

    PubMed

    Detsky, A S

    1993-05-01

    In Canada, provincial formulary review committees consider the effectiveness, safety, and cost of products when they derive advice for each Minister of Health. This article offers a draft set of guidelines for pharmaceutical manufacturers making submissions which include economic information, moving beyond a simple presentation of the unit price of the pharmaceutical product (e.g. price per day or course of therapy) and comparison to similar prices for alternative products. A full economic analysis compares all relevant costs and clinical outcomes of the new product with alternate therapeutic strategies for treating patients with a particular condition. The perspective of the decision maker must be clearly identified. The quality of the evidence supporting estimates of the variables incorporated in the analysis should be evaluated. Sensitivity analyses are used to assess the robustness of the qualitative conclusions. Reviewers will examine the answers to a set of 19 questions. Manufacturers can use these questions as a worksheet for preparation of an economic analysis to be incorporated in a submission. These guidelines are intended to be a starting point for further refinement, and discussion with health economists in industry and academia. Considerable flexibility will be used in reviewing documentation supporting economic analysis. Those preparing submissions should be encouraged to experiment with various approaches as part of the general development of this field and to engage provincial review committees in ongoing discussions.

  5. [Hazardous materials and work safety in veterinary practice. 1: Hazardous material definition and characterization, practice documentation and general rules for handling].

    PubMed

    Sliwinski-Korell, A; Lutz, F

    1998-04-01

    In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material is given and the potential risks are mentioned. The correct documentation regarding the protection of the purchase, storage, working conditions and removal of hazardous material and of the personal is explained. General rules for the handling of hazardous material are described. In part 2, particular emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gas, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references is also given.

  6. [Psychoanalysis and Psychiatrie-Enquete: expert interviews and document analysis].

    PubMed

    Söhner, Felicitas Petra; Fangerau, Heiner; Becker, Thomas

    2017-12-01

    Background The purpose of this paper is to analyse the perception of the role of psychoanalysis and psychoanalysts in the coming about of the Psychiatrie-Enquete in the Federal Republic of Germany (West Germany). Methods We performed a qualitative content analysis of expert interviews with persons involved in the Enquete (or witnessing the events as mental health professionals active at the time), a selective literature review and an analysis of documents on the Enquete process. Results Expert interviews, relevant literature and documents point to a role of psychoanalysis in the Enquete process. Psychoanalysts were considered to have been effective in the run-up to the Enquete and the work of the commission. Conclusion Psychoanalysis and a small number of psychoanalysts were perceived as being relevant in the overall process of the Psychiatrie-Enquete in West Germany. Georg Thieme Verlag KG Stuttgart · New York.

  7. School Safety and Security.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    This document offers additional guidelines for school facilities in California in the areas of safety and security, lighting, and cleanliness. It also offers a description of technology resources available on the World Wide Web. On the topic of safety and security, the document offers guidelines in the areas of entrances, doors, and controlled…

  8. Technical documentation challenges in aviation maintenance : a proceedings report.

    DOT National Transportation Integrated Search

    2012-11-01

    The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

  9. Model-based document categorization employing semantic pattern analysis and local structure clustering

    NASA Astrophysics Data System (ADS)

    Fume, Kosei; Ishitani, Yasuto

    2008-01-01

    We propose a document categorization method based on a document model that can be defined externally for each task and that categorizes Web content or business documents into a target category in accordance with the similarity of the model. The main feature of the proposed method consists of two aspects of semantics extraction from an input document. The semantics of terms are extracted by the semantic pattern analysis and implicit meanings of document substructure are specified by a bottom-up text clustering technique focusing on the similarity of text line attributes. We have constructed a system based on the proposed method for trial purposes. The experimental results show that the system achieves more than 80% classification accuracy in categorizing Web content and business documents into 15 or 70 categories.

  10. Integrated Safety Analysis Tiers

    NASA Technical Reports Server (NTRS)

    Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

    2009-01-01

    Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

  11. DARHT: INTEGRATION OF AUTHORIZATION BASIS REQUIREMENTS AND WORKER SAFETY

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    D. A. MC CLURE; C. A. NELSON; R. L. BOUDRIE

    2001-04-01

    This document describes the results of consensus agreements reached by the DARHT Safety Planning Team during the development of the update of the DARHT Safety Analysis Document (SAD). The SAD is one of the Authorization Basis (AB) Documents required by the Department prior to granting approval to operate the DARHT Facility. The DARHT Safety Planning Team is lead by Mr. Joel A. Baca of the Department of Energy Albuquerque Operations Office (DOE/AL). Team membership is drawn from the Department of Energy Albuquerque Operations Office, the Department of Energy Los Alamos Area Office (DOE/LAAO), and several divisions of the Los Alamosmore » National Laboratory. Revision 1 of the DARHT SAD had been written as part of the process for gaining approval to operate the Phase 1 (First Axis) Accelerator. Early in the planning stage for the required update of the SAD for the approval to operate both Phase 1 and Phase 2 (First Axis and Second Axis) DARHT Accelerator, it was discovered that a conflict existed between the Laboratory approach to describing the management of facility and worker safety.« less

  12. Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

    NASA Technical Reports Server (NTRS)

    Reveley, Mary S.

    2003-01-01

    The goal of the NASA Aviation Safety Program (AvSP) is to develop and demonstrate technologies that contribute to a reduction in the aviation fatal accident rate by a factor of 5 by the year 2007 and by a factor of 10 by the year 2022. Integrated safety analysis of day-to-day operations and risks within those operations will provide an understanding of the Aviation Safety Program portfolio. Safety benefits analyses are currently being conducted. Preliminary results for the Synthetic Vision Systems (SVS) and Weather Accident Prevention (WxAP) projects of the AvSP have been completed by the Logistics Management Institute under a contract with the NASA Glenn Research Center. These analyses include both a reliability analysis and a computer simulation model. The integrated safety analysis method comprises two principal components: a reliability model and a simulation model. In the reliability model, the results indicate how different technologies and systems will perform in normal, degraded, and failed modes of operation. In the simulation, an operational scenario is modeled. The primary purpose of the SVS project is to improve safety by providing visual-flightlike situation awareness during instrument conditions. The current analyses are an estimate of the benefits of SVS in avoiding controlled flight into terrain. The scenario modeled has an aircraft flying directly toward a terrain feature. When the flight crew determines that the aircraft is headed toward an obstruction, the aircraft executes a level turn at speed. The simulation is ended when the aircraft completes the turn.

  13. 2001 Safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2001-08-01

    The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. It also documented the lo...

  14. COLD-SAT feasibility study safety analysis

    NASA Technical Reports Server (NTRS)

    Mchenry, Steven T.; Yost, James M.

    1991-01-01

    The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

  15. Safety equipment list for the 241-SY-101 RAPID mitigation project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MORRIS, K.L.

    1999-06-29

    This document provides the safety classification for the safety (safety class and safety RAPID Mitigation Project. This document is being issued as the project SEL until the supporting authorization basis documentation, this document will be superseded by the TWRS SEL (LMHC 1999), documentation istlralized. Upon implementation of the authorization basis significant) structures, systems, and components (SSCS) associated with the 241-SY-1O1 which will be updated to include the information contained herein.

  16. Photovoltaic system criteria documents. Volume 5: Safety criteria for photovoltaic applications

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1979-01-01

    Methodology is described for determining potential safety hazards involved in the construction and operation of photovoltaic power systems and provides guidelines for the implementation of safety considerations in the specification, design and operation of photovoltaic systems. Safety verification procedures for use in solar photovoltaic systems are established.

  17. Analysis of new entrant motor carrier safety performance and compliance using SafeStat

    DOT National Transportation Integrated Search

    2000-03-01

    This report documents the findings of a special study undertaken to update, confirm and expand upon previous studies on the comparative (to experienced carriers) safety performance and compliance of large commercial motor vehicle operators (motor car...

  18. Improving safety on rural local and tribal roads site safety analysis - user guide #1.

    DOT National Transportation Integrated Search

    2014-08-01

    This User Guide presents an example of how rural local and Tribal practitioners can study conditions at a preselected site. It demonstrates the step-by-step safety analysis process presented in Improving Safety on Rural Local and Tribal Roads Saf...

  19. Analysis of Document Authentication Technique using Soft Magnetic Fibers

    NASA Astrophysics Data System (ADS)

    Aoki, Ayumi; Ikeda, Takashi; Yamada, Tsutomu; Takemura, Yasushi; Matsumoto, Tsutomu

    An artifact-metric system using magnetic fibers can be applied for authentications of stock certificate, bill, passport, plastic cards and other documents. Security of the system is guaranteed by its feature of difficulty in copy. This authentication system is based on randomly dispersed magnetic fibers embedded in documents. In this paper, a theoretical analysis was performed in order to evaluate this system. The position of the magnetic fibers was determined by a conventional function of random number generator. By measuring output waveforms by a magnetoresistance (MR) sensor, a false match rate (FMR) could be calculated. Optimizations of the density of the magnetic fibers and the dimension of the MR sensor were achieved.

  20. Reference Mission Operational Analysis Document (RMOAD) for the Life Sciences Research Facilities

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The space station will be constructed during the next decade as an orbiting, low-gravity, permanent facility. The facility will provide a multitude of research opportunities for many different users. The pressurized research laboratory will allow life scientists to study the effects of long-term exposure to microgravity on humans, animals, and plants. The results of these studies will increase our understanding of this foreign environment on basic life processes and ensure the safety of man's long-term presence in space. This document establishes initial operational requirements for the use of the Life Sciences Research Facility (LSRF) during its construction.

  1. Safety and business benefit analysis of NASA's aviation safety program

    DOT National Transportation Integrated Search

    2004-09-20

    NASA Aviation Safety Program elements encompass a wide range of products that require both public and private investment. Therefore, two methods of analysis, one relating to the public and the other to the private industry, must be combined to unders...

  2. Tobacco document research reporting

    PubMed Central

    Carter, S

    2005-01-01

    Design: Interpretive analysis of published research. Sample: 173 papers indexed in Medline between 1995 and 2004 that cited tobacco industry documents. Analysis: Information about year published, journal and author, and a set of codes relating to methods reporting, were managed in N*Vivo. This coding formed the basis of an interpretation of tobacco document research reporting. Results: Two types of papers were identified. The first used tobacco documents as the primary data source (A-papers). The second was dedicated to another purpose but cited a small number of documents (B-papers). In B-papers documents were used either to provide a specific example or to support an expansive contention. A-papers contained information about purpose, sources, searching, analysis, and limitations that differed by author and journal and over time. A-papers had no clear methodological context, but used words from three major traditions—interpretive research, positivist research, and history—to describe analysis. Interpretation: A descriptive mainstream form of tobacco document reporting is proposed, initially typical but decreasing, and a continuum of positioning of the researcher, from conduit to constructor. Reporting practices, particularly from experienced researchers, appeared to evolve towards researcher as constructor, with later papers showing more complex purposes, diverse sources, and detail of searching and analysis. Tobacco document research could learn from existing research traditions: a model for planning and evaluating tobacco document research is presented. PMID:16319359

  3. Patient safety principles in family medicine residency accreditation standards and curriculum objectives

    PubMed Central

    Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

    2016-01-01

    Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

  4. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    NASA Technical Reports Server (NTRS)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  5. Content analysis to detect high stress in oral interviews and text documents

    NASA Technical Reports Server (NTRS)

    Thirumalainambi, Rajkumar (Inventor); Jorgensen, Charles C. (Inventor)

    2012-01-01

    A system of interrogation to estimate whether a subject of interrogation is likely experiencing high stress, emotional volatility and/or internal conflict in the subject's responses to an interviewer's questions. The system applies one or more of four procedures, a first statistical analysis, a second statistical analysis, a third analysis and a heat map analysis, to identify one or more documents containing the subject's responses for which further examination is recommended. Words in the documents are characterized in terms of dimensions representing different classes of emotions and states of mind, in which the subject's responses that manifest high stress, emotional volatility and/or internal conflict are identified. A heat map visually displays the dimensions manifested by the subject's responses in different colors, textures, geometric shapes or other visually distinguishable indicia.

  6. An Analysis of Community Health Nurses Documentation: The Best Approach to Computerization

    PubMed Central

    Chalmers, M.

    1988-01-01

    The study explored and analyzed the actual patient-related documentation performed by a sample of community health nurses working in voluntary home health agencies. The outcome of the study was a system flow chart of that documentation and included: common components of the documentation, where in the existing systems they are recorded, when they are recorded by the nurse and why they are used by the nurses and administrative personnel in the agencies. The flow chart is suitable for use as a prototype for the development of a computer software package for the computerization of the patient-related documentation by community health nurses. General System and communication theories were used as a framework for this study. A thorough analysis of the documenation resulted in a complete and exhaustive explication of the documentation by community health nurses, as well as the identification of what parts of that documentation lend themselves most readily to computerization and what areas, if any, may not readily adapt to computerization.

  7. Recent Progresses in Nanobiosensing for Food Safety Analysis

    PubMed Central

    Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

    2016-01-01

    With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014–present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly. PMID:27447636

  8. Recent Progresses in Nanobiosensing for Food Safety Analysis.

    PubMed

    Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

    2016-07-19

    With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

  9. Mine safety assessment using gray relational analysis and bow tie model

    PubMed Central

    2018-01-01

    Mine safety assessment is a precondition for ensuring orderly and safety in production. The main purpose of this study was to prevent mine accidents more effectively by proposing a composite risk analysis model. First, the weights of the assessment indicators were determined by the revised integrated weight method, in which the objective weights were determined by a variation coefficient method and the subjective weights determined by the Delphi method. A new formula was then adopted to calculate the integrated weights based on the subjective and objective weights. Second, after the assessment indicator weights were determined, gray relational analysis was used to evaluate the safety of mine enterprises. Mine enterprise safety was ranked according to the gray relational degree, and weak links of mine safety practices identified based on gray relational analysis. Third, to validate the revised integrated weight method adopted in the process of gray relational analysis, the fuzzy evaluation method was used to the safety assessment of mine enterprises. Fourth, for first time, bow tie model was adopted to identify the causes and consequences of weak links and allow corresponding safety measures to be taken to guarantee the mine’s safe production. A case study of mine safety assessment was presented to demonstrate the effectiveness and rationality of the proposed composite risk analysis model, which can be applied to other related industries for safety evaluation. PMID:29561875

  10. Range Flight Safety Requirements

    NASA Technical Reports Server (NTRS)

    Loftin, Charles E.; Hudson, Sandra M.

    2018-01-01

    The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

  11. Web document ranking via active learning and kernel principal component analysis

    NASA Astrophysics Data System (ADS)

    Cai, Fei; Chen, Honghui; Shu, Zhen

    2015-09-01

    Web document ranking arises in many information retrieval (IR) applications, such as the search engine, recommendation system and online advertising. A challenging issue is how to select the representative query-document pairs and informative features as well for better learning and exploring new ranking models to produce an acceptable ranking list of candidate documents of each query. In this study, we propose an active sampling (AS) plus kernel principal component analysis (KPCA) based ranking model, viz. AS-KPCA Regression, to study the document ranking for a retrieval system, i.e. how to choose the representative query-document pairs and features for learning. More precisely, we fill those documents gradually into the training set by AS such that each of which will incur the highest expected DCG loss if unselected. Then, the KPCA is performed via projecting the selected query-document pairs onto p-principal components in the feature space to complete the regression. Hence, we can cut down the computational overhead and depress the impact incurred by noise simultaneously. To the best of our knowledge, we are the first to perform the document ranking via dimension reductions in two dimensions, namely, the number of documents and features simultaneously. Our experiments demonstrate that the performance of our approach is better than that of the baseline methods on the public LETOR 4.0 datasets. Our approach brings an improvement against RankBoost as well as other baselines near 20% in terms of MAP metric and less improvements using P@K and NDCG@K, respectively. Moreover, our approach is particularly suitable for document ranking on the noisy dataset in practice.

  12. Safety analysis in test facility design

    NASA Astrophysics Data System (ADS)

    Valk, A.; Jonker, R. J.

    1990-09-01

    The application of safety analysis techniques as developed in, for example nuclear and petrochemical industry, can be very beneficial in coping with the increasing complexity of modern test facility installations and their operations. To illustrate the various techniques available and their phasing in a project, an overview of the most commonly used techniques is presented. Two case studies are described: the hazard and operability study techniques and safety zoning in relation to the possible presence of asphyxiating atmospheres.

  13. Requirements Analysis for the Army Safety Management Information System (ASMIS)

    DTIC Science & Technology

    1989-03-01

    8217_>’ Telephone Number « .. PNL-6819 Limited Distribution Requirements Analysis for the Army Safety Management Information System (ASMIS) Final...PNL-6819 REQUIREMENTS ANALYSIS FOR THE ARMY SAFETY MANAGEMENT INFORMATION SYSTEM (ASMIS) FINAL REPORT J. S. Littlefield A. L. Corrigan March...accidents. This accident data is available under the Army Safety Management Information System (ASMIS) which is an umbrella for many databases

  14. Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  15. Comparison of approaches for mobile document image analysis using server supported smartphones

    NASA Astrophysics Data System (ADS)

    Ozarslan, Suleyman; Eren, P. Erhan

    2014-03-01

    With the recent advances in mobile technologies, new capabilities are emerging, such as mobile document image analysis. However, mobile phones are still less powerful than servers, and they have some resource limitations. One approach to overcome these limitations is performing resource-intensive processes of the application on remote servers. In mobile document image analysis, the most resource consuming process is the Optical Character Recognition (OCR) process, which is used to extract text in mobile phone captured images. In this study, our goal is to compare the in-phone and the remote server processing approaches for mobile document image analysis in order to explore their trade-offs. For the inphone approach, all processes required for mobile document image analysis run on the mobile phone. On the other hand, in the remote-server approach, core OCR process runs on the remote server and other processes run on the mobile phone. Results of the experiments show that the remote server approach is considerably faster than the in-phone approach in terms of OCR time, but adds extra delays such as network delay. Since compression and downscaling of images significantly reduce file sizes and extra delays, the remote server approach overall outperforms the in-phone approach in terms of selected speed and correct recognition metrics, if the gain in OCR time compensates for the extra delays. According to the results of the experiments, using the most preferable settings, the remote server approach performs better than the in-phone approach in terms of speed and acceptable correct recognition metrics.

  16. Posttest analysis of the FFTF inherent safety tests

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Padilla, A. Jr.; Claybrook, S.W.

    Inherent safety tests were performed during 1986 in the 400-MW (thermal) Fast Flux Test Facility (FFTF) reactor to demonstrate the effectiveness of an inherent shutdown device called the gas expansion module (GEM). The GEM device provided a strong negative reactivity feedback during loss-of-flow conditions by increasing the neutron leakage as a result of an expanding gas bubble. The best-estimate pretest calculations for these tests were performed using the IANUS plant analysis code (Westinghouse Electric Corporation proprietary code) and the MELT/SIEX3 core analysis code. These two codes were also used to perform the required operational safety analyses for the FFTF reactormore » and plant. Although it was intended to also use the SASSYS systems (core and plant) analysis code, the calibration of the SASSYS code for FFTF core and plant analysis was not completed in time to perform pretest analyses. The purpose of this paper is to present the results of the posttest analysis of the 1986 FFTF inherent safety tests using the SASSYS code.« less

  17. Relationships between psychological safety climate facets and safety behavior in the rail industry: a dominance analysis.

    PubMed

    Morrow, Stephanie L; McGonagle, Alyssa K; Dove-Steinkamp, Megan L; Walker, Curtis T; Marmet, Matthew; Barnes-Farrell, Janet L

    2010-09-01

    The goals of this study were twofold: (1) to confirm a relationship between employee perceptions of psychological safety climate and safety behavior for a sample of workers in the rail industry and (2) to explore the relative strengths of relationships between specific facets of safety climate and safety behavior. Non-management rail maintenance workers employed by a large North American railroad completed a survey (n=421) regarding workplace safety perceptions and behaviors. Three facets of safety climate (management safety, coworker safety, and work-safety tension) were assessed as relating to individual workers' reported safety behavior. All three facets were significantly associated with safety behavior. Dominance analysis was used to assess the relative importance of each facet as related to the outcome, and work-safety tension evidenced the strongest relationship with safety behavior. Published by Elsevier Ltd.

  18. Automated documentation generator for advanced protein crystal growth

    NASA Technical Reports Server (NTRS)

    Maddux, Gary A.; Provancha, Anna; Chattam, David

    1994-01-01

    To achieve an environment less dependent on the flow of paper, automated techniques of data storage and retrieval must be utilized. This software system, 'Automated Payload Experiment Tool,' seeks to provide a knowledge-based, hypertext environment for the development of NASA documentation. Once developed, the final system should be able to guide a Principal Investigator through the documentation process in a more timely and efficient manner, while supplying more accurate information to the NASA payload developer. The current system is designed for the development of the Science Requirements Document (SRD), the Experiment Requirements Document (ERD), the Project Plan, and the Safety Requirements Document.

  19. Roadway safety analysis methodology for Utah : final report.

    DOT National Transportation Integrated Search

    2016-12-01

    This research focuses on the creation of a three-part Roadway Safety Analysis methodology that applies and automates the cumulative work of recently-completed roadway safety research. The first part is to prepare the roadway and crash data for analys...

  20. Ares I-X Range Safety Simulation and Analysis IV and V

    NASA Technical Reports Server (NTRS)

    Merry, Carl M.; Brewer, Joan D.; Dulski, Matt B.; Gimenez, Adrian; Barron, Kyle; Tarpley, Ashley F.; Craig, A. Scott; Beaty, Jim R.; Starr, Brett R.

    2011-01-01

    NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) product data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual (AFSPCMAN) 91-710. Some products included were a nominal ascent trajectory, ascent flight envelopes, and malfunction turn data. These products are used by the Air Force s 45th Space Wing (45SW) to ensure public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures the Ares I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for certain RS products. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

  1. Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1994-10-01

    This document is the third volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of appendices C through U of the report« less

  2. Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

    ERIC Educational Resources Information Center

    MacDonald, Wayne, Comp.; And Others

    Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

  3. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... for the design and construction of a new DOE nuclear facility or a major modification to an existing... acceptable nuclear safety design criteria for use in preparing a preliminary documented safety analysis. As a... mitigate hazards to workers, the public, or the environment. They include (1) physical, design, structural...

  4. Public health human resources: a comparative analysis of policy documents in two Canadian provinces

    PubMed Central

    2014-01-01

    Background Amidst concerns regarding the capacity of the public health system to respond rapidly and appropriately to threats such as pandemics and terrorism, along with changing population health needs, governments have focused on strengthening public health systems. A key factor in a robust public health system is its workforce. As part of a nationally funded study of public health renewal in Canada, a policy analysis was conducted to compare public health human resources-relevant documents in two Canadian provinces, British Columbia (BC) and Ontario (ON), as they each implement public health renewal activities. Methods A content analysis of policy and planning documents from government and public health-related organizations was conducted by a research team comprised of academics and government decision-makers. Documents published between 2003 and 2011 were accessed (BC = 27; ON = 20); documents were either publicly available or internal to government and excerpted with permission. Documentary texts were deductively coded using a coding template developed by the researchers based on key health human resources concepts derived from two national policy documents. Results Documents in both provinces highlighted the importance of public health human resources planning and policies; this was particularly evident in early post-SARS documents. Key thematic areas of public health human resources identified were: education, training, and competencies; capacity; supply; intersectoral collaboration; leadership; public health planning context; and priority populations. Policy documents in both provinces discussed the importance of an educated, competent public health workforce with the appropriate skills and competencies for the effective and efficient delivery of public health services. Conclusion This policy analysis identified progressive work on public health human resources policy and planning with early documents providing an inventory of issues to be

  5. Public health human resources: a comparative analysis of policy documents in two Canadian provinces.

    PubMed

    Regan, Sandra; MacDonald, Marjorie; Allan, Diane E; Martin, Cheryl; Peroff-Johnston, Nancy

    2014-02-24

    Amidst concerns regarding the capacity of the public health system to respond rapidly and appropriately to threats such as pandemics and terrorism, along with changing population health needs, governments have focused on strengthening public health systems. A key factor in a robust public health system is its workforce. As part of a nationally funded study of public health renewal in Canada, a policy analysis was conducted to compare public health human resources-relevant documents in two Canadian provinces, British Columbia (BC) and Ontario (ON), as they each implement public health renewal activities. A content analysis of policy and planning documents from government and public health-related organizations was conducted by a research team comprised of academics and government decision-makers. Documents published between 2003 and 2011 were accessed (BC = 27; ON = 20); documents were either publicly available or internal to government and excerpted with permission. Documentary texts were deductively coded using a coding template developed by the researchers based on key health human resources concepts derived from two national policy documents. Documents in both provinces highlighted the importance of public health human resources planning and policies; this was particularly evident in early post-SARS documents. Key thematic areas of public health human resources identified were: education, training, and competencies; capacity; supply; intersectoral collaboration; leadership; public health planning context; and priority populations. Policy documents in both provinces discussed the importance of an educated, competent public health workforce with the appropriate skills and competencies for the effective and efficient delivery of public health services. This policy analysis identified progressive work on public health human resources policy and planning with early documents providing an inventory of issues to be addressed and later documents providing

  6. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  7. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  8. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  9. Final safety analysis report for the Galileo mission: Volume 3 (Book 2), Nuclear risk analysis document: Appendices: Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1989-01-25

    It is the purpose of the NRAD to provide an analysis of the range of potential consequences of accidents which have been identified that are associated with the launching and deployment of the Galileo mission spacecraft. The specific consequences analyzed are those associated with the possible release of radioactive material (fuel) of the Radioisotope Thermoelectric Generators (RTGs). They are in terms of radiation doses to people and areas of deposition of radioactive material. These consequence analyses can be used in several ways. One way is to identify the potential range of consequences which might have to be dealt with ifmore » there were to be an accident with a release of fuel, so as to assure that, given such an accident, the health and safety of the public will be reasonably protected. Another use of the information, in conjunction with accident and release probabilities, is to estimate the risks associated with the mission. That is, most space launches occur without incident. Given an accident, the most probable result relative to the RTGs is complete containment of the radioactive material. Only a small fraction of accidents might result in a release of fuel and subsequent radiological consequences. The combination of probability with consequence is risk, which can be compared to other human and societal risks to assure that no undue risks are implied by undertaking the mission. Book 2 contains eight appendices.« less

  10. Global Nursing Issues and Development: Analysis of World Health Organization Documents.

    PubMed

    Wong, Frances Kam Yuet; Liu, Huaping; Wang, Hui; Anderson, Debra; Seib, Charrlotte; Molasiotis, Alex

    2015-11-01

    To analyze World Health Organization (WHO) documents to identify global nursing issues and development. Qualitative content analysis. Documents published by the six WHO regions between 2007 and 2012 and with key words related to nurse/midwife or nursing/midwifery were included. Themes, categories, and subcategories were derived. The final coding reached 80% agreement among three independent coders, and the final coding for the discrepant coding was reached by consensus. Thirty-two documents from the regions of Europe (n = 19), the Americas (n = 6), the Western Pacific (n = 4), Africa (n = 1), the Eastern Mediterranean (n = 1), and Southeast Asia (n = 1) were examined. A total of 385 units of analysis dispersed in 31 subcategories under four themes were derived. The four themes derived (number of unit of analysis, %) were Management & Leadership (206, 53.5), Practice (75, 19.5), Education (70, 18.2), and Research (34, 8.8). The key nursing issues of concern at the global level are workforce, the impacts of nursing in health care, professional status, and education of nurses. International alliances can help advance nursing, but the visibility of nursing in the WHO needs to be strengthened. Organizational leadership is important in order to optimize the use of nursing competence in practice and inform policy makers regarding the value of nursing to promote people's health. © 2015 Sigma Theta Tau International.

  11. Organ donation in the ICU: A document analysis of institutional policies, protocols, and order sets.

    PubMed

    Oczkowski, Simon J W; Centofanti, John E; Durepos, Pamela; Arseneau, Erika; Kelecevic, Julija; Cook, Deborah J; Meade, Maureen O

    2018-04-01

    To better understand how local policies influence organ donation rates. We conducted a document analysis of our ICU organ donation policies, protocols and order sets. We used a systematic search of our institution's policy library to identify documents related to organ donation. We used Mindnode software to create a publication timeline, basic statistics to describe document characteristics, and qualitative content analysis to extract document themes. Documents were retrieved from Hamilton Health Sciences, an academic hospital system with a high volume of organ donation, from database inception to October 2015. We retrieved 12 active organ donation documents, including six protocols, two policies, two order sets, and two unclassified documents, a majority (75%) after the introduction of donation after circulatory death in 2006. Four major themes emerged: organ donation process, quality of care, patient and family-centred care, and the role of the institution. These themes indicate areas where documented institutional standards may be beneficial. Further research is necessary to determine the relationship of local policies, protocols, and order sets to actual organ donation practices, and to identify barriers and facilitators to improving donation rates. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Ares I-X Range Safety Simulation Verification and Analysis IV and V

    NASA Technical Reports Server (NTRS)

    Tarpley, Ashley; Beaty, James; Starr, Brett

    2010-01-01

    NASA s ARES I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) flight data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual 91-710. Some products included in the flight data package were a nominal ascent trajectory, ascent flight envelope trajectories, and malfunction turn trajectories. These data are used by the Air Force s 45th Space Wing (45SW) to ensure Eastern Range public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data in regards to public safety and mission success, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. Multiple NASA centers and contractor organizations were assigned specific products to IV&V. The data generation and IV&V work was coordinated through the Launch Constellation Range Safety Panel s Trajectory Working Group, which included members from the prime and IV&V organizations as well as the 45SW. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures ARES I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for an RS product. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

  13. Prison-Based Educational Programs: A Content Analysis of Government Documents

    ERIC Educational Resources Information Center

    Piotrowski, Chris; Lathrop, Peter J.

    2012-01-01

    The literature provides limited, constructive, consensus-based information to correctional officials and administrators on the efficacy of prison-based programs. This study reports an analysis of 8 review government documents, that surveyed the research literature from 1980-2008, on the topic of educational rehabilitation programs available to…

  14. Canister Storage Building (CSB) Hazard Analysis Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    POWERS, T.B.

    2000-03-16

    This report describes the methodology used in conducting the Canister Storage Building (CSB) Hazard Analysis to support the final CSB Safety Analysis Report and documents the results. This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis process identified hazardous conditions and material-at-risk, determined causes for potential accidents, identified preventive and mitigative features, and qualitatively estimated the frequencies and consequences of specific occurrences. The hazard analysis was performed by a team of cognizant CSB operations and design personnel, safetymore » analysts familiar with the CSB, and technical experts in specialty areas. The material included in this report documents the final state of a nearly two-year long process. Attachment A provides two lists of hazard analysis team members and describes the background and experience of each. The first list is a complete list of the hazard analysis team members that have been involved over the two-year long process. The second list is a subset of the first list and consists of those hazard analysis team members that reviewed and agreed to the final hazard analysis documentation. The material included in this report documents the final state of a nearly two-year long process involving formal facilitated group sessions and independent hazard and accident analysis work. The hazard analysis process led to the selection of candidate accidents for further quantitative analysis. New information relative to the hazards, discovered during the accident analysis, was incorporated into the hazard analysis data in order to compile a complete profile of facility hazards. Through this process, the results of the hazard and accident analyses led directly to the identification of safety structures, systems, and components, technical safety requirements, and

  15. 76 FR 411 - Regulatory Guidance Concerning Electronic Signatures and Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... Concerning Electronic Signatures and Documents AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of regulatory guidance. SUMMARY: FMCSA issues regulatory guidance concerning the... regulatory guidance concerning the use of electronic signatures and documents to comply with FMCSA...

  16. Advanced missions safety. Volume 3: Appendices. Part 2: Experiment

    NASA Technical Reports Server (NTRS)

    Hinton, M. G., Jr.

    1972-01-01

    Supporting documentation pertaining to the hazards of transporting experimental equipment on the Earth Orbit Shuttle is presented. The subjects discussed are: (1) experiment and hardware definition, (2) hazard analysis, (3) preventive measure assessment, (4) preventive measures statements, (5) remedial measure assessment, and (6) experiment interaction safety considerations.

  17. A Study on Urban Road Traffic Safety Based on Matter Element Analysis

    PubMed Central

    Hu, Qizhou; Zhou, Zhuping; Sun, Xu

    2014-01-01

    This paper examines a new evaluation of urban road traffic safety based on a matter element analysis, avoiding the difficulties found in other traffic safety evaluations. The issue of urban road traffic safety has been investigated through the matter element analysis theory. The chief aim of the present work is to investigate the features of urban road traffic safety. Emphasis was placed on the construction of a criterion function by which traffic safety achieved a hierarchical system of objectives to be evaluated. The matter element analysis theory was used to create the comprehensive appraisal model of urban road traffic safety. The technique was used to employ a newly developed and versatile matter element analysis algorithm. The matter element matrix solves the uncertainty and incompatibility of the evaluated factors used to assess urban road traffic safety. The application results showed the superiority of the evaluation model and a didactic example was included to illustrate the computational procedure. PMID:25587267

  18. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.; Baggs, Rhoda

    2007-01-01

    Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

  19. A root cause analysis project in a medication safety course.

    PubMed

    Schafer, Jason J

    2012-08-10

    To develop, implement, and evaluate team-based root cause analysis projects as part of a required medication safety course for second-year pharmacy students. Lectures, in-class activities, and out-of-class reading assignments were used to develop students' medication safety skills and introduce them to the culture of medication safety. Students applied these skills within teams by evaluating cases of medication errors using root cause analyses. Teams also developed error prevention strategies and formally presented their findings. Student performance was assessed using a medication errors evaluation rubric. Of the 211 students who completed the course, the majority performed well on root cause analysis assignments and rated them favorably on course evaluations. Medication error evaluation and prevention was successfully introduced in a medication safety course using team-based root cause analysis projects.

  20. DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vessard, S.G.

    1995-12-31

    In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

  1. A Qualitative Analysis Evaluating The Purposes And Practices Of Clinical Documentation

    PubMed Central

    Ho, Y.-X.; Gadd, C. S.; Kohorst, K.L.; Rosenbloom, S.T.

    2014-01-01

    Summary Objectives An important challenge for biomedical informatics researchers is determining the best approach for healthcare providers to use when generating clinical notes in settings where electronic health record (EHR) systems are used. The goal of this qualitative study was to explore healthcare providers’ and administrators’ perceptions about the purpose of clinical documentation and their own documentation practices. Methods We conducted seven focus groups with a total of 46 subjects composed of healthcare providers and administrators to collect knowledge, perceptions and beliefs about documentation from those who generate and review notes, respectively. Data were analyzed using inductive analysis to probe and classify impressions collected from focus group subjects. Results We observed that both healthcare providers and administrators believe that documentation serves five primary domains: clinical, administrative, legal, research, education. These purposes are tied closely to the nature of the clinical note as a document shared by multiple stakeholders, which can be a source of tension for all parties who must use the note. Most providers reported using a combination of methods to complete their notes in a timely fashion without compromising patient care. While all administrators reported relying on computer-based documentation tools to review notes, they expressed a desire for a more efficient method of extracting relevant data. Conclusions Although clinical documentation has utility, and is valued highly by its users, the development and successful adoption of a clinical documentation tool largely depends on its ability to be smoothly integrated into the provider’s busy workflow, while allowing the provider to generate a note that communicates effectively and efficiently with multiple stakeholders. PMID:24734130

  2. Dutch pedestrian safety research review

    DOT National Transportation Integrated Search

    1999-12-01

    This report is one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration to document pedestrian safety in other countries. This report reviews recent pedestrian safety research in the Netherlands. It addre...

  3. SafetyAnalyst Testing and Implementation

    DOT National Transportation Integrated Search

    2009-03-01

    SafetyAnalyst is a software tool developed by the Federal Highway Administration to assist state and local transportation agencies on analyzing safety data and managing their roadway safety programs. This research report documents the major tasks acc...

  4. 29 CFR 2204.203 - Documentation of fees and expenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Documentation of fees and expenses. 2204.203 Section 2204.203 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN PROCEEDINGS BEFORE THE OCCUPATIONAL SAFETY AND HEALTH REVIEW...

  5. 29 CFR 2204.301 - Filing and service of documents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Filing and service of documents. 2204.301 Section 2204.301 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN PROCEEDINGS BEFORE THE OCCUPATIONAL SAFETY AND HEALTH REVIEW...

  6. Investigation of safety analysis methods using computer vision techniques

    NASA Astrophysics Data System (ADS)

    Shirazi, Mohammad Shokrolah; Morris, Brendan Tran

    2017-09-01

    This work investigates safety analysis methods using computer vision techniques. The vision-based tracking system is developed to provide the trajectory of road users including vehicles and pedestrians. Safety analysis methods are developed to estimate time to collision (TTC) and postencroachment time (PET) that are two important safety measurements. Corresponding algorithms are presented and their advantages and drawbacks are shown through their success in capturing the conflict events in real time. The performance of the tracking system is evaluated first, and probability density estimation of TTC and PET are shown for 1-h monitoring of a Las Vegas intersection. Finally, an idea of an intersection safety map is introduced, and TTC values of two different intersections are estimated for 1 day from 8:00 a.m. to 6:00 p.m.

  7. 77 FR 31724 - Production Measurement Documents Incorporated by Reference; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement 30 CFR Part 250 [Docket ID: BSEE-2012-0003] RIN 1014-AA01 Production Measurement Documents Incorporated by Reference; Correction AGENCY: Bureau of Safety and Environmental Enforcement (BSEE), Interior. ACTION: Correcting...

  8. A Taxonomy of Fallacies in System Safety Arguments

    NASA Technical Reports Server (NTRS)

    Greenwell, William S.; Knight, John C.; Holloway, C. Michael; Pease, Jacob J.

    2006-01-01

    Safety cases are gaining acceptance as assurance vehicles for safety-related systems. A safety case documents the evidence and argument that a system is safe to operate; however, logical fallacies in the underlying argument may undermine a system s safety claims. Removing these fallacies is essential to reduce the risk of safety-related system failure. We present a taxonomy of common fallacies in safety arguments that is intended to assist safety professionals in avoiding and detecting fallacious reasoning in the arguments they develop and review. The taxonomy derives from a survey of general argument fallacies and a separate survey of fallacies in real-world safety arguments. Our taxonomy is specific to safety argumentation, and it is targeted at professionals who work with safety arguments but may lack formal training in logic or argumentation. We discuss the rationale for the selection and categorization of fallacies in the taxonomy. In addition to its applications to the development and review of safety cases, our taxonomy could also support the analysis of system failures and promote the development of more robust safety case patterns.

  9. Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1994-10-01

    This document is the first volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of an introduction, summary/conclusion, site description and assessment, description of facility, and description of operation.« less

  10. Canadian research on pedestrian safety

    DOT National Transportation Integrated Search

    1999-12-01

    This report is one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration to document pedestrian safety in other countries. This report reviews Canadian research in six areas of pedestrian safety: (1) Inter...

  11. Underground Test Area Subproject Phase I Data Analysis Task. Volume VII - Tritium Transport Model Documentation Package

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  12. Analysis of a risk prevention document using dependability techniques: a first step towards an effectiveness model

    NASA Astrophysics Data System (ADS)

    Ferrer, Laetitia; Curt, Corinne; Tacnet, Jean-Marc

    2018-04-01

    Major hazard prevention is a main challenge given that it is specifically based on information communicated to the public. In France, preventive information is notably provided by way of local regulatory documents. Unfortunately, the law requires only few specifications concerning their content; therefore one can question the impact on the general population relative to the way the document is concretely created. Ergo, the purpose of our work is to propose an analytical methodology to evaluate preventive risk communication document effectiveness. The methodology is based on dependability approaches and is applied in this paper to the Document d'Information Communal sur les Risques Majeurs (DICRIM; in English, Municipal Information Document on Major Risks). DICRIM has to be made by mayors and addressed to the public to provide information on major hazards affecting their municipalities. An analysis of law compliance of the document is carried out thanks to the identification of regulatory detection elements. These are applied to a database of 30 DICRIMs. This analysis leads to a discussion on points such as usefulness of the missing elements. External and internal function analysis permits the identification of the form and content requirements and service and technical functions of the document and its components (here its sections). Their results are used to carry out an FMEA (failure modes and effects analysis), which allows us to define the failure and to identify detection elements. This permits the evaluation of the effectiveness of form and content of each components of the document. The outputs are validated by experts from the different fields investigated. Those results are obtained to build, in future works, a decision support model for the municipality (or specialised consulting firms) in charge of drawing up documents.

  13. Motorcoach and school bus fire safety analysis : technology brief.

    DOT National Transportation Integrated Search

    2016-11-01

    In 2009, the Federal Motor Carrier Safety Administration (FMCSA) published findings from a study entitled Motorcoach Fire Safety Analysis. The objective of this study was to gather and analyze information regarding the causes, frequency, and se...

  14. 14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

  15. 14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

  16. 14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

  17. 14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

  18. 14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

  19. 14 CFR 417.103 - Safety organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 417.103 Section 417... OF TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.103 Safety organization. (a) A launch operator must maintain and document a safety organization. A launch operator must...

  20. 75 FR 45678 - Notice of Availability of Interim Staff Guidance Document for Fuel Cycle Facilities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... Document for Fuel Cycle Facilities AGENCY: Nuclear Regulatory Commission. ACTION: Notice of availability..., Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety and Safeguards, U.S... Commission (NRC) prepares and issues Interim Staff Guidance (ISG) documents for fuel cycle facilities. These...

  1. Analysis of Documentation Speed Using Web-Based Medical Speech Recognition Technology: Randomized Controlled Trial.

    PubMed

    Vogel, Markus; Kaisers, Wolfgang; Wassmuth, Ralf; Mayatepek, Ertan

    2015-11-03

    Clinical documentation has undergone a change due to the usage of electronic health records. The core element is to capture clinical findings and document therapy electronically. Health care personnel spend a significant portion of their time on the computer. Alternatives to self-typing, such as speech recognition, are currently believed to increase documentation efficiency and quality, as well as satisfaction of health professionals while accomplishing clinical documentation, but few studies in this area have been published to date. This study describes the effects of using a Web-based medical speech recognition system for clinical documentation in a university hospital on (1) documentation speed, (2) document length, and (3) physician satisfaction. Reports of 28 physicians were randomized to be created with (intervention) or without (control) the assistance of a Web-based system of medical automatic speech recognition (ASR) in the German language. The documentation was entered into a browser's text area and the time to complete the documentation including all necessary corrections, correction effort, number of characters, and mood of participant were stored in a database. The underlying time comprised text entering, text correction, and finalization of the documentation event. Participants self-assessed their moods on a scale of 1-3 (1=good, 2=moderate, 3=bad). Statistical analysis was done using permutation tests. The number of clinical reports eligible for further analysis stood at 1455. Out of 1455 reports, 718 (49.35%) were assisted by ASR and 737 (50.65%) were not assisted by ASR. Average documentation speed without ASR was 173 (SD 101) characters per minute, while it was 217 (SD 120) characters per minute using ASR. The overall increase in documentation speed through Web-based ASR assistance was 26% (P=.04). Participants documented an average of 356 (SD 388) characters per report when not assisted by ASR and 649 (SD 561) characters per report when assisted

  2. 14 CFR 33.75 - Safety analysis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a) (1) The applicant must analyze the engine, including the control system, to assess the likely...

  3. SUSHI: an exquisite recipe for fully documented, reproducible and reusable NGS data analysis.

    PubMed

    Hatakeyama, Masaomi; Opitz, Lennart; Russo, Giancarlo; Qi, Weihong; Schlapbach, Ralph; Rehrauer, Hubert

    2016-06-02

    Next generation sequencing (NGS) produces massive datasets consisting of billions of reads and up to thousands of samples. Subsequent bioinformatic analysis is typically done with the help of open source tools, where each application performs a single step towards the final result. This situation leaves the bioinformaticians with the tasks to combine the tools, manage the data files and meta-information, document the analysis, and ensure reproducibility. We present SUSHI, an agile data analysis framework that relieves bioinformaticians from the administrative challenges of their data analysis. SUSHI lets users build reproducible data analysis workflows from individual applications and manages the input data, the parameters, meta-information with user-driven semantics, and the job scripts. As distinguishing features, SUSHI provides an expert command line interface as well as a convenient web interface to run bioinformatics tools. SUSHI datasets are self-contained and self-documented on the file system. This makes them fully reproducible and ready to be shared. With the associated meta-information being formatted as plain text tables, the datasets can be readily further analyzed and interpreted outside SUSHI. SUSHI provides an exquisite recipe for analysing NGS data. By following the SUSHI recipe, SUSHI makes data analysis straightforward and takes care of documentation and administration tasks. Thus, the user can fully dedicate his time to the analysis itself. SUSHI is suitable for use by bioinformaticians as well as life science researchers. It is targeted for, but by no means constrained to, NGS data analysis. Our SUSHI instance is in productive use and has served as data analysis interface for more than 1000 data analysis projects. SUSHI source code as well as a demo server are freely available.

  4. Variable dynamic testbed vehicle : safety plan

    DOT National Transportation Integrated Search

    1997-02-01

    This safety document covers the entire safety process from inception to delivery of the Variable Dynamic Testbed Vehicle. In addition to addressing the process of safety on the vehicle , it should provide a basis on which to build future safety proce...

  5. Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

    PubMed

    Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

    2018-03-01

    Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

  6. Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DAVIS, S.J.

    2000-05-25

    This document identifies critical characteristics of components to be dedicated for use in Safety Class (SC) or Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common radiation area monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF), in safety class, safety significant systems. System modifications are to be performed in accordance with the instructions provided on ECN 658230. Components for this change are commercially available and interchangeablemore » with the existing alarm configuration This document focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

  7. Random safety auditing, root cause analysis, failure mode and effects analysis.

    PubMed

    Ursprung, Robert; Gray, James

    2010-03-01

    Improving quality and safety in health care is a major concern for health care providers, the general public, and policy makers. Errors and quality issues are leading causes of morbidity and mortality across the health care industry. There is evidence that patients in the neonatal intensive care unit (NICU) are at high risk for serious medical errors. To facilitate compliance with safe practices, many institutions have established quality-assurance monitoring procedures. Three techniques that have been found useful in the health care setting are failure mode and effects analysis, root cause analysis, and random safety auditing. When used together, these techniques are effective tools for system analysis and redesign focused on providing safe delivery of care in the complex NICU system. Copyright 2010 Elsevier Inc. All rights reserved.

  8. Microbial food safety in Ghana: a meta-analysis.

    PubMed

    Saba, Courage K S; Gonzalez-Zorn, Bruno

    2012-12-16

    Food safety is a crucial factor in the growth of developing countries worldwide. In this study, we present a meta-analysis of microbiological food safety publications from Ghana. The search words "Ghana food safety", "Ghana food research", and "Ghana food bacteria" were used to search for microbiological food safety publications with related abstracts or titles in PubMed, published between 1997 and 2009. We obtained 183 research articles, from which we excluded articles concerning ready-to-eat microbial fermented foods and waterborne microorganisms as well as articles without abstracts. The criteria used for analysis of these publications were based on an assessment of methodological soundness previously developed for use in the medical field, with some modifications incorporated. The most predominant bacteria in Ghanain foods are Enterobacter spp., Citrobacter spp., Klebsiella spp. and Escherichia spp., which were found to be present in 65%, 50%, 46% and 38% respectively, of the food samples considered in the studies analysed. The most contaminated food samples were macaroni, salad, and milk. Although the methodological quality of the articles was generally sound, most of them did not give directions for future research. Several did not state possible reasons for differences between studies. The microbiological food contamination in Ghana is alarming. However, we found that the downward trend in publications of microbial food safety articles is appalling. Hence a concerted effort in research on food safety is needed in Ghana to help curb the incidence of preventable food-borne disease.

  9. Flammable gas technical basis document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO, C.A.

    2003-03-22

    This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls.

  10. Safety management vs. picking leaves.

    PubMed

    Wright, D

    1991-09-01

    A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

  11. Galileo and Ulysses missions safety analysis and launch readiness status

    NASA Technical Reports Server (NTRS)

    Cork, M. Joseph; Turi, James A.

    1989-01-01

    The Galileo spacecraft, which will release probes to explore the Jupiter system, was launched in October, 1989 as the payload on STS-34, and the Ulysses spacecraft, which will fly by Jupiter en route to a polar orbit of the sun, is presently entering system-test activity in preparation for an October, 1990 launch. This paper reviews the Galileo and Ulysses mission objectives and design approaches and presents details of the missions' safety analysis. The processes used to develop the safety analysis are described and the results of safety tests are presented.

  12. Evaluation of the safety performance of highway alignments based on fault tree analysis and safety boundaries.

    PubMed

    Chen, Yikai; Wang, Kai; Xu, Chengcheng; Shi, Qin; He, Jie; Li, Peiqing; Shi, Ting

    2018-05-19

    To overcome the limitations of previous highway alignment safety evaluation methods, this article presents a highway alignment safety evaluation method based on fault tree analysis (FTA) and the characteristics of vehicle safety boundaries, within the framework of dynamic modeling of the driver-vehicle-road system. Approaches for categorizing the vehicle failure modes while driving on highways and the corresponding safety boundaries were comprehensively investigated based on vehicle system dynamics theory. Then, an overall crash probability model was formulated based on FTA considering the risks of 3 failure modes: losing steering capability, losing track-holding capability, and rear-end collision. The proposed method was implemented on a highway segment between Bengbu and Nanjing in China. A driver-vehicle-road multibody dynamics model was developed based on the 3D alignments of the Bengbu to Nanjing section of Ning-Luo expressway using Carsim, and the dynamics indices, such as sideslip angle and, yaw rate were obtained. Then, the average crash probability of each road section was calculated with a fixed-length method. Finally, the average crash probability was validated against the crash frequency per kilometer to demonstrate the accuracy of the proposed method. The results of the regression analysis and correlation analysis indicated good consistency between the results of the safety evaluation and the crash data and that it outperformed the safety evaluation methods used in previous studies. The proposed method has the potential to be used in practical engineering applications to identify crash-prone locations and alignment deficiencies on highways in the planning and design phases, as well as those in service.

  13. Pedestrian safety in Australia

    DOT National Transportation Integrated Search

    1999-12-01

    This report was one in a series of pedestrian safety synthesis reports prepared for the Federal Highway : Administration (FHWA) to document pedestrian safety in other countries. Reports are also available for: : United Kingdom (FHWA-RD-99-089) : Cana...

  14. Pedestrian safety in Sweden

    DOT National Transportation Integrated Search

    1999-12-01

    This report was one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration (FHWA) to document pedestrian safety in other countries. Reports are also available for: : United Kingdom (FHWA-RD-99-089) : Canada...

  15. Bite mark documentation and analysis: the forensic 3D/CAD supported photogrammetry approach.

    PubMed

    Thali, M J; Braun, M; Markwalder, Th H; Brueschweiler, W; Zollinger, U; Malik, Naseem J; Yen, K; Dirnhofer, R

    2003-08-12

    Bite mark identification is based on the individuality of a dentition, which is used to match a bite mark to a suspected perpetrator. This matching is based on a tooth-by-tooth and arch-to-arch comparison utilising parameters of size, shape and alignment. The most common method used to analyse bite mark are carried out in 2D space. That means that the 3D information is preserved only two dimensionally with distortions. This paper presents a new 3D documentation, analysis and visualisation approach based on forensic 3D/CAD supported photogrammetry (FPHG) and the use of a 3D surface scanner. Our photogrammetric approach and the used visualisation method is, to the best to our knowledge, the first 3D approach for bite mark analysis in an actual case. The documentation has no distortion artifacts as can be found with standard photography. All the data are documented with a metric 3D measurement, orientation and subsequent analysis in 3D space. Beside the metrical analysis between bite mark and cast, it is possible using our method to utilise the topographical 3D feature of each individual tooth. This means that the 3D features of the biting surfaces and edges of each teeth are respected which is--as shown in our case--very important especially in the front teeth which have the first contact to the skin. Based upon the 3D detailed representation of the cast with the 3D topographic characteristics of the teeth, the interaction with the 3D documented skin can be visualised and analysed on the computer screen.

  16. A summary description of the flammable gas tank safety program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, G.D.; Sherwood, D.J.

    1994-10-01

    Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the wastemore » suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks.« less

  17. Probabilistic safety analysis of earth retaining structures during earthquakes

    NASA Astrophysics Data System (ADS)

    Grivas, D. A.; Souflis, C.

    1982-07-01

    A procedure is presented for determining the probability of failure of Earth retaining structures under static or seismic conditions. Four possible modes of failure (overturning, base sliding, bearing capacity, and overall sliding) are examined and their combined effect is evaluated with the aid of combinatorial analysis. The probability of failure is shown to be a more adequate measure of safety than the customary factor of safety. As Earth retaining structures may fail in four distinct modes, a system analysis can provide a single estimate for the possibility of failure. A Bayesian formulation of the safety retaining walls is found to provide an improved measure for the predicted probability of failure under seismic loading. The presented Bayesian analysis can account for the damage incurred to a retaining wall during an earthquake to provide an improved estimate for its probability of failure during future seismic events.

  18. 14 CFR 33.75 - Safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

  19. 14 CFR 33.75 - Safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

  20. 14 CFR 33.75 - Safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

  1. 14 CFR 33.75 - Safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... judgment and previous experience combined with sound design and test philosophies. (4) The applicant must... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... the effects of failures and likely combination of failures be verified by test. (c) The primary...

  2. Medical technology at home: safety-related items in technical documentation.

    PubMed

    Hilbers, Ellen S M; de Vries, Claudette G J C A; Geertsma, Robert E

    2013-01-01

    This study aimed to investigate the technical documentation of manufacturers on issues of safe use of their device in a home setting. Three categories of equipment were selected: infusion pumps, ventilators, and dialysis systems. Risk analyses, instructions for use, labels, and post market surveillance procedures were requested from manufacturers. Additionally, they were asked to fill out a questionnaire on collection of field experience, on incidents, and training activities. Specific risks of device operation by lay users in a home setting were incompletely addressed in the risk analyses. A substantial number of user manuals were designed for professionals, rather than for patients or lay carers. Risk analyses and user information often showed incomplete coherence. Post market surveillance was mainly based on passive collection of field experiences. Manufacturers of infusion pumps, ventilators, and dialysis systems pay insufficient attention to the specific risks of use by lay persons in home settings. It is expected that this conclusion is also applicable for other medical equipment for treatment at home. Manufacturers of medical equipment for home use should pay more attention to use errors, lay use and home-specific risks in design, risk analysis, and user information. Field experiences should be collected more actively. Coherence between risk analysis and user information should be improved. Notified bodies should address these aspects in their assessment. User manuals issued by institutions supervising a specific home therapy should be drawn up in consultation with the manufacturer.

  3. Safety and Security Interface Technology Initiative

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

    Safety and Security Interface Technology Initiative Mr. Kevin J. Carroll Dr. Robert Lowrie, Dr. Micheal Lehto BWXT Y12 NSC Oak Ridge, TN 37831 865-576-2289/865-241-2772 carrollkj@y12.doe.gov Work Objective. Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. “Supporting Excellence in Operations Through Safety Analysis,” (workshop theme)more » includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is “Safeguards/Security Integration with Safety.” This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis

  4. Analysis of Documents Published in Scopus Database on Foreign Language Learning through Mobile Learning: A Content Analysis

    ERIC Educational Resources Information Center

    Uzunboylu, Huseyin; Genc, Zeynep

    2017-01-01

    The purpose of this study is to determine the recent trends in foreign language learning through mobile learning. The study was conducted employing document analysis and related content analysis among the qualitative research methodology. Through the search conducted on Scopus database with the key words "mobile learning and foreign language…

  5. Model-Driven Safety Analysis of Closed-Loop Medical Systems

    PubMed Central

    Pajic, Miroslav; Mangharam, Rahul; Sokolsky, Oleg; Arney, David; Goldman, Julian; Lee, Insup

    2013-01-01

    In modern hospitals, patients are treated using a wide array of medical devices that are increasingly interacting with each other over the network, thus offering a perfect example of a cyber-physical system. We study the safety of a medical device system for the physiologic closed-loop control of drug infusion. The main contribution of the paper is the verification approach for the safety properties of closed-loop medical device systems. We demonstrate, using a case study, that the approach can be applied to a system of clinical importance. Our method combines simulation-based analysis of a detailed model of the system that contains continuous patient dynamics with model checking of a more abstract timed automata model. We show that the relationship between the two models preserves the crucial aspect of the timing behavior that ensures the conservativeness of the safety analysis. We also describe system design that can provide open-loop safety under network failure. PMID:24177176

  6. Model-Driven Safety Analysis of Closed-Loop Medical Systems.

    PubMed

    Pajic, Miroslav; Mangharam, Rahul; Sokolsky, Oleg; Arney, David; Goldman, Julian; Lee, Insup

    2012-10-26

    In modern hospitals, patients are treated using a wide array of medical devices that are increasingly interacting with each other over the network, thus offering a perfect example of a cyber-physical system. We study the safety of a medical device system for the physiologic closed-loop control of drug infusion. The main contribution of the paper is the verification approach for the safety properties of closed-loop medical device systems. We demonstrate, using a case study, that the approach can be applied to a system of clinical importance. Our method combines simulation-based analysis of a detailed model of the system that contains continuous patient dynamics with model checking of a more abstract timed automata model. We show that the relationship between the two models preserves the crucial aspect of the timing behavior that ensures the conservativeness of the safety analysis. We also describe system design that can provide open-loop safety under network failure.

  7. 49 CFR 821.7 - Filing of documents with the Board.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., National Transportation Safety Board, 490 L'Enfant Plaza East SW., Washington, DC 20594, and addressed to... filed with the Office of General Counsel, National Transportation Safety Board, 490 L'Enfant Plaza East... upper left-hand corner by staple or clip, and shall not be bound or hole-punched. Any document failing...

  8. Centroid-Based Document Classification Algorithms: Analysis & Experimental Results

    DTIC Science & Technology

    2000-03-06

    stories such as baseball, football , basketball, and Olympics. In the first category, most of the documents contain words Clinton and Lewinsky and hence...document. On the other hand, any of sports related words like baseball, football , and basketball appearing in a document will put the document in the...0.15 diseas 0.14 women 0.13 heart 0.12 drug 4 0.41 newspap 0.22 editor 0.19 advertis 0.14 media 0.13 peruvian 0.13 coverag 0.12 percent 0.12 journalist

  9. Medication communication through documentation in medical wards: knowledge and power relations.

    PubMed

    Liu, Wei; Manias, Elizabeth; Gerdtz, Marie

    2014-09-01

    Health professionals communicate with each other about medication information using different forms of documentation. This article explores knowledge and power relations surrounding medication information exchanged through documentation among nurses, doctors and pharmacists. Ethnographic fieldwork was conducted in 2010 in two medical wards of a metropolitan hospital in Australia. Data collection methods included participant observations, field interviews, video-recordings, document retrieval and video reflexive focus groups. A critical discourse analytic framework was used to guide data analysis. The written medication chart was the main means of communicating medication decisions from doctors to nurses as compared to verbal communication. Nurses positioned themselves as auditors of the medication chart and scrutinised medical prescribing to maintain the discourse of patient safety. Pharmacists utilised the discourse of scientific judgement to guide their decision-making on the necessity of verbal communication with nurses and doctors. Targeted interdisciplinary meetings involving nurses, doctors and pharmacists should be organised in ward settings to discuss the importance of having documented medication information conveyed verbally across different disciplines. Health professionals should be encouraged to proactively seek out each other to relay changes in medication regimens and treatment goals. © 2013 John Wiley & Sons Ltd.

  10. 75 FR 24718 - Guidance for Industry on Documenting Statistical Analysis Programs and Data Files; Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-05

    ...] Guidance for Industry on Documenting Statistical Analysis Programs and Data Files; Availability AGENCY... Programs and Data Files.'' This guidance is provided to inform study statisticians of recommendations for documenting statistical analyses and data files submitted to the Center for Veterinary Medicine (CVM) for the...

  11. 14 CFR 415.33 - Safety organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 415.33 Section 415.33... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch From a Federal Launch Range § 415.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by...

  12. Engineering Safety- and Security-Related Requirements for Software-Intensive Systems

    DTIC Science & Technology

    2010-04-27

    Requirements Negative (shall not) Requirements Hardware Requirements equ remen s System / Documentation Requirements eve oper Requirements Operational ...Validation Actual / Proposed Defensibility C li Operational Vulnerability Analysis VulnerabilityVulnerability Safety Vulnerability performs System ...including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson

  13. Criticality Safety Evaluation of Standard Criticality Safety Requirements #1-520 g Operations in PF-4

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yamanaka, Alan Joseph Jr.

    Guidance has been requested from the Nuclear Criticality Safety Division (NCSD) regarding processes that involve 520 grams of fissionable material or less. This Level-3 evaluation was conducted and documented in accordance with NCS-AP-004 (Ref. 1), formerly NCS-GUIDE-01. This evaluation is being written as a generic evaluation for all operations that will be able to operate using a 520-gram mass limit. Implementation for specific operations will be performed using a Level 1 CSED, which will confirm and document that this CSED can be used for the specific operation as discussed in NCS-MEMO-17-007 (Ref. 2). This Level 3 CSED updates and supersedesmore » the analysis performed in NCS-TECH-14-014 (Ref. 3).« less

  14. Applying importance-performance analysis to patient safety culture.

    PubMed

    Lee, Yii-Ching; Wu, Hsin-Hung; Hsieh, Wan-Lin; Weng, Shao-Jen; Hsieh, Liang-Po; Huang, Chih-Hsuan

    2015-01-01

    The Sexton et al.'s (2006) safety attitudes questionnaire (SAQ) has been widely used to assess staff's attitudes towards patient safety in healthcare organizations. However, to date there have been few studies that discuss the perceptions of patient safety both from hospital staff and upper management. The purpose of this paper is to improve and to develop better strategies regarding patient safety in healthcare organizations. The Chinese version of SAQ based on the Taiwan Joint Commission on Hospital Accreditation is used to evaluate the perceptions of hospital staff. The current study then lies in applying importance-performance analysis technique to identify the major strengths and weaknesses of the safety culture. The results show that teamwork climate, safety climate, job satisfaction, stress recognition and working conditions are major strengths and should be maintained in order to provide a better patient safety culture. On the contrary, perceptions of management and hospital handoffs and transitions are important weaknesses and should be improved immediately. Research limitations/implications - The research is restricted in generalizability. The assessment of hospital staff in patient safety culture is physicians and registered nurses. It would be interesting to further evaluate other staff's (e.g. technicians, pharmacists and others) opinions regarding patient safety culture in the hospital. Few studies have clearly evaluated the perceptions of healthcare organization management regarding patient safety culture. Healthcare managers enable to take more effective actions to improve the level of patient safety by investigating key characteristics (either strengths or weaknesses) that healthcare organizations should focus on.

  15. 14 CFR 35.15 - Safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single propeller elements (for example...

  16. 14 CFR 35.15 - Safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

  17. 14 CFR 35.15 - Safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

  18. 14 CFR 35.15 - Safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

  19. Patient safety challenges in a case study hospital--of relevance for transfusion processes?

    PubMed

    Aase, Karina; Høyland, Sindre; Olsen, Espen; Wiig, Siri; Nilsen, Stein Tore

    2008-10-01

    The paper reports results from a research project with the objective of studying patient safety, and relates the finding to safety issues within transfusion medicine. The background is an increased focus on undesired events related to diagnosis, medication, and patient treatment in general in the healthcare sector. The study is designed as a case study within a regional Norwegian hospital conducting specialised health care services. The study includes multiple methods such as interviews, document analysis, analysis of error reports, and a questionnaire survey. Results show that the challenges for improved patient safety, based on employees' perceptions, are hospital management support, reporting of accidents/incidents, and collaboration across hospital units. Several of these generic safety challenges are also found to be of relevance for a hospital's transfusion service. Positive patient safety factors are identified as teamwork within hospital units, a non-punitive response to errors, and unit manager's actions promoting safety.

  20. Directory of aerospace safety specialized information sources

    NASA Technical Reports Server (NTRS)

    Fullerton, E. A.; Rubens, L. S.

    1973-01-01

    A directory is presented to make available to the aerospace safety community a handbook of organizations and experts in specific, well-defined areas of safety technology. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, as well as information in hazard and failure cause identification, accident analysis, materials characteristics, and other related subject areas. These 171 organizations and their staff members, hopefully, should provide technical information in the form of documentation, data and consulting expertise. These will be sources that have assembled and collated their information, so that it will be useful in the solution of engineering problems. One of the goals of the project in the United States that have and are willing to share data of value to the aerospace safety community.

  1. Safety analysis report for packaging (onsite) steel drum

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McCormick, W.A.

    This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum.

  2. 2003 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2003-08-01

    The objective of this study was to establish 2003 safety belt and child safety seat usage rates in Kentucky. The 2003 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

  3. 2004 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2004-08-01

    The objective of this study was to establish 2004 safety belt and child safety seat usage rates in Kentucky. The 2004 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

  4. Factors associated with the enactment of safety belt and motorcycle helmet laws.

    PubMed

    Law, Teik Hua; Noland, Robert B; Evans, Andrew W

    2013-07-01

    It has been shown that road safety laws, such as motorcycle helmet and safety belt laws, have a significant effect in reducing road fatalities. Although an expanding body of literature has documented the effects of these laws on road safety, it remains unclear which factors influence the likelihood that these laws are enacted. This study attempts to identify the factors that influence the decision to enact safety belt and motorcycle helmet laws. Using panel data from 31 countries between 1963 and 2002, our results reveal that increased democracy, education level, per capita income, political stability, and more equitable income distribution within a country are associated with the enactment of road safety laws. © 2012 Society for Risk Analysis.

  5. Revenue-Generating Language Programs at Canadian Post-Secondary Institutions: Emerging Themes from a Documentation Analysis

    ERIC Educational Resources Information Center

    Eaton, Sarah Elaine; Goddard, J. Tim

    2008-01-01

    This presentation identifies emerging themes in a study combining documentation analysis (Atkinson & Coffey, 2004) and interviews that examine policy statements, promotional materials and various institutional documents from selected English as a Second Language (ESL) programs at one Canadian University. It looks at how and why ESL programs…

  6. Analysis of dynamical response of air blast loaded safety device

    NASA Astrophysics Data System (ADS)

    Tropkin, S. N.; Tlyasheva, R. R.; Bayazitov, M. I.; Kuzeev, I. R.

    2018-03-01

    Equipment of many oil and gas processing plants in the Russian Federation is considerably worn-out. This causes the decrease of reliability and durability of equipment and rises the accident rate. An air explosion is the one of the most dangerous cases for plants in oil and gas industry, usually caused by uncontrolled emission and inflammation of oil products. Air explosion can lead to significant danger for life and health of plant staff, so it necessitates safety device usage. A new type of a safety device is designed. Numerical simulation is necessary to analyse design parameters and performance of the safety device, subjected to air blast loading. Coupled fluid-structure interaction analysis is performed to determine strength of the protective device and its performance. The coupled Euler-Lagrange method, allowable in Abaqus by SIMULIA, is selected as the most appropriate analysis tool to study blast wave interaction with the safety device. Absorption factors of blast wave are evaluated for the safety device. This factors allow one to assess efficiency of the safety device, and its main structural component – dampener. Usage of CEL allowed one to model fast and accurately the dampener behaviour, and to develop the parametric model to determine safety device sizes.

  7. Document boundary determination using structural and lexical analysis

    NASA Astrophysics Data System (ADS)

    Taghva, Kazem; Cartright, Marc-Allen

    2009-01-01

    The document boundary determination problem is the process of identifying individual documents in a stack of papers. In this paper, we report on a classification system for automation of this process. The system employs features based on document structure and lexical content. We also report on experimental results to support the effectiveness of this system.

  8. Safety Guide for Health Occupations Programs.

    ERIC Educational Resources Information Center

    Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

    The handbook is intended to be utilized by health occupations teachers as supplementary instructional materials for a unit on safety. The document contains general safety rules applicable to hospitals and other health care institutions. Outlined are general rules for fire safety and office and clerical safety and more specific rules for the…

  9. Safety of intravenous thrombolysis in stroke mimics: prospective 5-year study and comprehensive meta-analysis.

    PubMed

    Tsivgoulis, Georgios; Zand, Ramin; Katsanos, Aristeidis H; Goyal, Nitin; Uchino, Ken; Chang, Jason; Dardiotis, Efthimios; Putaala, Jukka; Alexandrov, Anne W; Malkoff, Marc D; Alexandrov, Andrei V

    2015-05-01

    Shortening door-to-needle time may lead to inadvertent intravenous thrombolysis (IVT) administration in stroke mimics (SMs). We sought to determine the safety of IVT in SMs using prospective, single-center data and by conducting a comprehensive meta-analysis of reported case-series. We prospectively analyzed consecutive IVT-treated patients during a 5-year period at a tertiary care stroke center. A systematic review and meta-analysis of case-series reporting safety of IVT in SMs and confirmed acute ischemic stroke were conducted. Symptomatic intracerebral hemorrhage was defined as imaging evidence of ICH with an National Institutes of Health Stroke scale increase of ≥4 points. Favorable functional outcome at hospital discharge was defined as a modified Rankin Scale score of 0 to 1. Of 516 consecutive IVT patients at our tertiary care center (50% men; mean age, 60±14 years; median National Institutes of Health Stroke scale, 11; range, 3-22), SMs comprised 75 cases. Symptomatic intracerebral hemorrhage occurred in 1 patient, whereas we documented no cases of orolingual edema or major extracranial hemorrhagic complications. In meta-analysis of 9 studies (8942 IVT-treated patients), the pooled rates of symptomatic intracerebral hemorrhage and orolingual edema among 392 patients with SM treated with IVT were 0.5% (95% confidence interval, 0%-2%) and 0.3% (95% confidence interval, 0%-2%), respectively. Patients with SM were found to have a significantly lower risk for symptomatic intracerebral hemorrhage compared with patients with acute ischemic stroke (risk ratio=0.33; 95% confidence interval, 0.14-0.77; P=0.010), with no evidence of heterogeneity or publication bias. Favorable functional outcome was almost 3-fold higher in patients with SM in comparison with patients with acute ischemic stroke (risk ratio=2.78; 95% confidence interval, 2.07-3.73; P<0.00001). Our prospective, single-center experience coupled with the findings of the comprehensive meta-analysis

  10. Vital sign documentation in electronic records: The development of workarounds.

    PubMed

    Stevenson, Jean E; Israelsson, Johan; Nilsson, Gunilla; Petersson, Goran; Bath, Peter A

    2018-06-01

    Workarounds are commonplace in healthcare settings. An increase in the use of electronic health records has led to an escalation of workarounds as healthcare professionals cope with systems which are inadequate for their needs. Closely related to this, the documentation of vital signs in electronic health records has been problematic. The accuracy and completeness of vital sign documentation has a direct impact on the recognition of deterioration in a patient's condition. We examined workflow processes to identify workarounds related to vital signs in a 372-bed hospital in Sweden. In three clinical areas, a qualitative study was performed with data collected during observations and interviews and analysed through thematic content analysis. We identified paper workarounds in the form of handwritten notes and a total of eight pre-printed paper observation charts. Our results suggested that nurses created workarounds to allow a smooth workflow and ensure patients safety.

  11. Sources of Safety Data and Statistical Strategies for Design and Analysis: Clinical Trials.

    PubMed

    Zink, Richard C; Marchenko, Olga; Sanchez-Kam, Matilde; Ma, Haijun; Jiang, Qi

    2018-03-01

    There has been an increased emphasis on the proactive and comprehensive evaluation of safety endpoints to ensure patient well-being throughout the medical product life cycle. In fact, depending on the severity of the underlying disease, it is important to plan for a comprehensive safety evaluation at the start of any development program. Statisticians should be intimately involved in this process and contribute their expertise to study design, safety data collection, analysis, reporting (including data visualization), and interpretation. In this manuscript, we review the challenges associated with the analysis of safety endpoints and describe the safety data that are available to influence the design and analysis of premarket clinical trials. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from clinical trials compared to other sources. Clinical trials are an important source of safety data that contribute to the totality of safety information available to generate evidence for regulators, sponsors, payers, physicians, and patients. This work is a result of the efforts of the American Statistical Association Biopharmaceutical Section Safety Working Group.

  12. Flammable Gas Technical Basis Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO, C.A.

    2003-07-30

    This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls. Revision 1 incorporates comments received from ORP.

  13. Limited-scope probabilistic safety analysis for the Los Alamos Meson Physics Facility (LAMPF)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharirli, M.; Rand, J.L.; Sasser, M.K.

    1992-01-01

    The reliability of instrumentation and safety systems is a major issue in the operation of accelerator facilities. A probabilistic safety analysis was performed or the key safety and instrumentation systems at the Los Alamos Meson Physics Facility (LAMPF). in Phase I of this unique study, the Personnel Safety System (PSS) and the Current Limiters (XLs) were analyzed through the use of the fault tree analyses, failure modes and effects analysis, and criticality analysis. Phase II of the program was done to update and reevaluate the safety systems after the Phase I recommendations were implemented. This paper provides a brief reviewmore » of the studies involved in Phases I and II of the program.« less

  14. Limited-scope probabilistic safety analysis for the Los Alamos Meson Physics Facility (LAMPF)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharirli, M.; Rand, J.L.; Sasser, M.K.

    1992-12-01

    The reliability of instrumentation and safety systems is a major issue in the operation of accelerator facilities. A probabilistic safety analysis was performed or the key safety and instrumentation systems at the Los Alamos Meson Physics Facility (LAMPF). in Phase I of this unique study, the Personnel Safety System (PSS) and the Current Limiters (XLs) were analyzed through the use of the fault tree analyses, failure modes and effects analysis, and criticality analysis. Phase II of the program was done to update and reevaluate the safety systems after the Phase I recommendations were implemented. This paper provides a brief reviewmore » of the studies involved in Phases I and II of the program.« less

  15. Document co-citation analysis to enhance transdisciplinary research

    PubMed Central

    Trujillo, Caleb M.; Long, Tammy M.

    2018-01-01

    Specialized and emerging fields of research infrequently cross disciplinary boundaries and would benefit from frameworks, methods, and materials informed by other fields. Document co-citation analysis, a method developed by bibliometric research, is demonstrated as a way to help identify key literature for cross-disciplinary ideas. To illustrate the method in a useful context, we mapped peer-recognized scholarship related to systems thinking. In addition, three procedures for validation of co-citation networks are proposed and implemented. This method may be useful for strategically selecting information that can build consilience about ideas and constructs that are relevant across a range of disciplines. PMID:29308433

  16. Westinghouse Hanford Company (WHC) standards/requirements identification document (S/RID)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bennett, G.L.

    1996-03-15

    This Standards/Requirements Identification Document (S/RID) set forth the Environmental Safety and Health (ES&H) standards/requirements for Westinghouse Hanford Company Level Programs, where implementation and compliance is the responsibility of these organizations. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

  17. Security analysis for biometric data in ID documents

    NASA Astrophysics Data System (ADS)

    Schimke, Sascha; Kiltz, Stefan; Vielhauer, Claus; Kalker, Ton

    2005-03-01

    In this paper we analyze chances and challenges with respect to the security of using biometrics in ID documents. We identify goals for ID documents, set by national and international authorities, and discuss the degree of security, which is obtainable with the inclusion of biometric into documents like passports. Starting from classical techniques for manual authentication of ID card holders, we expand our view towards automatic methods based on biometrics. We do so by reviewing different human biometric attributes by modality, as well as by discussing possible techniques for storing and handling the particular biometric data on the document. Further, we explore possible vulnerabilities of potential biometric passport systems. Based on the findings of that discussion we will expand upon two exemplary approaches for including digital biometric data in the context of ID documents and present potential risks attack scenarios along with technical aspects such as capacity and robustness.

  18. Surgical Safety Training of World Health Organization Initiatives.

    PubMed

    Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

    2014-01-01

    Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

  19. The effect of challenge and hindrance stressors on safety behavior and safety outcomes: a meta-analysis.

    PubMed

    Clarke, Sharon

    2012-10-01

    The significance of occupational stressors as a risk factor in accidents has long been recognized; however, the behavioral mechanisms underlying this relationship are currently not well-understood. Meta-analysis was utilized to test the relationships between occupational stressors (challenge and hindrance), safety behaviors (compliance and participation), and safety outcomes (occupational injuries and near-misses). It was hypothesized that hindrance stressors would have negative effects on both safety compliance and safety participation, and subsequently, safety outcomes, whereas challenge stressors would have positive effects. The hypotheses relating to hindrance stressors were supported, suggesting that hindrance stressors lead to a significant reduction in both compliance with safety rules and participation in safety-related activities. Hindrance stressors were also associated with higher levels of occupational injuries and near-misses. The relationship between hindrance stressors and occupational injuries was fully mediated by safety behaviors. However, the hypotheses related to challenge stressors were not supported. Challenge stressors had a nonsignificant, near-zero association with compliance and occupational injuries, a small negative association with participation, and a small positive association with near-misses. The theoretical and practical implications of the meta-analytic findings are discussed, as well as avenues for further research.

  20. System analysis of vehicle active safety problem

    NASA Astrophysics Data System (ADS)

    Buznikov, S. E.

    2018-02-01

    The problem of the road transport safety affects the vital interests of the most of the population and is characterized by a global level of significance. The system analysis of problem of creation of competitive active vehicle safety systems is presented as an interrelated complex of tasks of multi-criterion optimization and dynamic stabilization of the state variables of a controlled object. Solving them requires generation of all possible variants of technical solutions within the software and hardware domains and synthesis of the control, which is close to optimum. For implementing the task of the system analysis the Zwicky “morphological box” method is used. Creation of comprehensive active safety systems involves solution of the problem of preventing typical collisions. For solving it, a structured set of collisions is introduced with its elements being generated also using the Zwicky “morphological box” method. The obstacle speed, the longitudinal acceleration of the controlled object and the unpredictable changes in its movement direction due to certain faults, the road surface condition and the control errors are taken as structure variables that characterize the conditions of collisions. The conditions for preventing typical collisions are presented as inequalities for physical variables that define the state vector of the object and its dynamic limits.

  1. Ares I-X Range Safety Flight Envelope Analysis

    NASA Technical Reports Server (NTRS)

    Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

    2011-01-01

    Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

  2. Preliminary Evaluation of an Aviation Safety Thesaurus' Utility for Enhancing Automated Processing of Incident Reports

    NASA Technical Reports Server (NTRS)

    Barrientos, Francesca; Castle, Joseph; McIntosh, Dawn; Srivastava, Ashok

    2007-01-01

    This document presents a preliminary evaluation the utility of the FAA Safety Analytics Thesaurus (SAT) utility in enhancing automated document processing applications under development at NASA Ames Research Center (ARC). Current development efforts at ARC are described, including overviews of the statistical machine learning techniques that have been investigated. An analysis of opportunities for applying thesaurus knowledge to improving algorithm performance is then presented.

  3. Rapid Exploitation and Analysis of Documents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Buttler, D J; Andrzejewski, D; Stevens, K D

    Analysts are overwhelmed with information. They have large archives of historical data, both structured and unstructured, and continuous streams of relevant messages and documents that they need to match to current tasks, digest, and incorporate into their analysis. The purpose of the READ project is to develop technologies to make it easier to catalog, classify, and locate relevant information. We approached this task from multiple angles. First, we tackle the issue of processing large quantities of information in reasonable time. Second, we provide mechanisms that allow users to customize their queries based on latent topics exposed from corpus statistics. Third,more » we assist users in organizing query results, adding localized expert structure over results. Forth, we use word sense disambiguation techniques to increase the precision of matching user generated keyword lists with terms and concepts in the corpus. Fifth, we enhance co-occurrence statistics with latent topic attribution, to aid entity relationship discovery. Finally we quantitatively analyze the quality of three popular latent modeling techniques to examine under which circumstances each is useful.« less

  4. Linguistic analysis of large-scale medical incident reports for patient safety.

    PubMed

    Fujita, Katsuhide; Akiyama, Masanori; Park, Keunsik; Yamaguchi, Etsuko Nakagami; Furukawa, Hiroyuki

    2012-01-01

    The analysis of medical incident reports is indispensable for patient safety. The cycles between analysis of incident reports and proposals to medical staffs are a key point for improving the patient safety in the hospital. Most incident reports are composed from freely written descriptions, but an analysis of such free descriptions is not sufficient in the medical field. In this study, we aim to accumulate and reinterpret findings using structured incident information, to clarify improvements that should be made to solve the root cause of the accident, and to ensure safe medical treatment through such improvements. We employ natural language processing (NLP) and network analysis to identify effective categories of medical incident reports. Network analysis can find various relationships that are not only direct but also indirect. In addition, we compare bottom-up results obtained by NLP with existing categories based on experts' judgment. By the bottom-up analysis, the class of patient managements regarding patients' fallings and medicines in top-down analysis is created clearly. Finally, we present new perspectives on ways of improving patient safety.

  5. 2009 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2009-07-01

    The objective of this study was to establish 2009 safety belt and child safety seat usage rates in Kentucky. The 2009 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  6. 2002 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2002-07-01

    The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  7. 2001 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2001-08-01

    The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  8. Enhancing Safety of Artificially Ventilated Patients Using Ambient Process Analysis.

    PubMed

    Lins, Christian; Gerka, Alexander; Lüpkes, Christian; Röhrig, Rainer; Hein, Andreas

    2018-01-01

    In this paper, we present an approach for enhancing the safety of artificially ventilated patients using ambient process analysis. We propose to use an analysis system consisting of low-cost ambient sensors such as power sensor, RGB-D sensor, passage detector, and matrix infrared temperature sensor to reduce risks for artificially ventilated patients in both home and clinical environments. We describe the system concept and our implementation and show how the system can contribute to patient safety.

  9. The geography of patient safety: a topical analysis of sterility.

    PubMed

    Mesman, Jessica

    2009-12-01

    Many studies on patient safety are geared towards prevention of adverse events by eliminating causes of error. In this article, I argue that patient safety research needs to widen its analytical scope and include causes of strength as well. This change of focus enables me to ask other questions, like why don't things go wrong more often? Or, what is the significance of time and space for patient safety? The focal point of this article is on the spatial dimension of patient safety. To gain insight into the 'geography' of patient safety and perform a topical analysis, I will focus on one specific kind of space (sterile space), one specific medical procedure (insertion of an intravenous line) and one specific medical ward (neonatology). Based on ethnographic data from research in the Netherlands, I demonstrate how spatial arrangements produce sterility and how sterility work produces spatial orders at the same time. Detailed analysis shows how a sterile line insertion involves the convergence of spatially distributed resources, relocations of the field of activity, an assemblage of an infrastructure of attention, a specific compositional order of materials, and the scaling down of one's degree of mobility. Sterility, I will argue, turns out to be a product of spatial orderings. Simultaneously, sterility work generates particular spatial orders, like open and restricted areas, by producing buffers and boundaries. However, the spatial order of sterility intersects with the spatial order of other lines of activity. Insight into the normative structure of these co-existing spatial orders turns out to be crucial for patient safety. By analyzing processes of spatial fine-tuning in everyday practice, it becomes possible to identify spatial competences and circumstances that enable staff members to provide safe health care. As such, a topical analysis offers an alternative perspective of patient safety, one that takes into account its spatial dimension.

  10. 14 CFR 415.33 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

  11. Textual blocks rectification method based on fast Hough transform analysis in identity documents recognition

    NASA Astrophysics Data System (ADS)

    Bezmaternykh, P. V.; Nikolaev, D. P.; Arlazarov, V. L.

    2018-04-01

    Textual blocks rectification or slant correction is an important stage of document image processing in OCR systems. This paper considers existing methods and introduces an approach for the construction of such algorithms based on Fast Hough Transform analysis. A quality measurement technique is proposed and obtained results are shown for both printed and handwritten textual blocks processing as a part of an industrial system of identity documents recognition on mobile devices.

  12. An analysis of electronic health record-related patient safety concerns

    PubMed Central

    Meeks, Derek W; Smith, Michael W; Taylor, Lesley; Sittig, Dean F; Scott, Jean M; Singh, Hardeep

    2014-01-01

    Objective A recent Institute of Medicine report called for attention to safety issues related to electronic health records (EHRs). We analyzed EHR-related safety concerns reported within a large, integrated healthcare system. Methods The Informatics Patient Safety Office of the Veterans Health Administration (VA) maintains a non-punitive, voluntary reporting system to collect and investigate EHR-related safety concerns (ie, adverse events, potential events, and near misses). We analyzed completed investigations using an eight-dimension sociotechnical conceptual model that accounted for both technical and non-technical dimensions of safety. Using the framework analysis approach to qualitative data, we identified emergent and recurring safety concerns common to multiple reports. Results We extracted 100 consecutive, unique, closed investigations between August 2009 and May 2013 from 344 reported incidents. Seventy-four involved unsafe technology and 25 involved unsafe use of technology. A majority (70%) involved two or more model dimensions. Most often, non-technical dimensions such as workflow, policies, and personnel interacted in a complex fashion with technical dimensions such as software/hardware, content, and user interface to produce safety concerns. Most (94%) safety concerns related to either unmet data-display needs in the EHR (ie, displayed information available to the end user failed to reduce uncertainty or led to increased potential for patient harm), software upgrades or modifications, data transmission between components of the EHR, or ‘hidden dependencies’ within the EHR. Discussion EHR-related safety concerns involving both unsafe technology and unsafe use of technology persist long after ‘go-live’ and despite the sophisticated EHR infrastructure represented in our data source. Currently, few healthcare institutions have reporting and analysis capabilities similar to the VA. Conclusions Because EHR-related safety concerns have complex

  13. 2010 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2010-07-01

    The objective of this study was to establish 2010 safety belt and child safety seat usage rates in Kentucky. The 2010 survey continues to document the results after enactment of the original "second enforcement" statewide mandatory safety belt law in...

  14. 2007 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2007-08-01

    The objective of this study was to establish 2007 safety belt and child safety seat usage rates in Kentucky. The 2007 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  15. 2006 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2006-08-01

    The objective of this study was to establish 2006 safety belt and child safety seat usage rates in Kentucky. The 2006 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  16. 2008 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2008-08-01

    The objective of this study was to establish 2008 safety belt and child safety seat usage rates in Kentucky. The 2008 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  17. 2005 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2005-08-01

    The objective of this study was to establish 2005 safety belt and child safety seat usage rates in Kentucky. The 2005 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  18. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  19. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  20. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  1. 14 CFR 417.405 - Ground safety analysis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

  2. 14 CFR 417.405 - Ground safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

  3. The Aviation System Monitoring and Modeling (ASMM) Project: A Documentation of its History and Accomplishments: 1999-2005

    NASA Technical Reports Server (NTRS)

    Statler, Irving C. (Editor)

    2007-01-01

    The Aviation System Monitoring and Modeling (ASMM) Project was one of the projects within NASA s Aviation Safety Program from 1999 through 2005. The objective of the ASMM Project was to develop the technologies to enable the aviation industry to undertake a proactive approach to the management of its system-wide safety risks. The ASMM Project entailed four interdependent elements: (1) Data Analysis Tools Development - develop tools to convert numerical and textual data into information; (2) Intramural Monitoring - test and evaluate the data analysis tools in operational environments; (3) Extramural Monitoring - gain insight into the aviation system performance by surveying its front-line operators; and (4) Modeling and Simulations - provide reliable predictions of the system-wide hazards, their causal factors, and their operational risks that may result from the introduction of new technologies, new procedures, or new operational concepts. This report is a documentation of the history of this highly successful project and of its many accomplishments and contributions to improved safety of the aviation system.

  4. Nuclear and chemical safety analysis: Purex Plant 1970 thorium campaign

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Boldt, A.L.; Oberg, G.C.

    The purpose of this document is to discuss the flowsheet and the related processing equipment with respect to nuclear and chemical safety. The analyses presented are based on equipment utilization and revised piping as outlined in the design criteria. Processing of thorium and uranium-233 in the Purex Plant can be accomplished within currently accepted levels of risk with respect to chemical and nuclear safety if minor instrumentation changes are made. Uranium-233 processing is limited to a rate of about 670 grams per hour by equipment capacities and criticality safety considerations. The major criticality prevention problems result from the potential accumulationmore » of uranium-233 in a solvent phase in E-H4 (ICU concentrator), TK-J1 (IUC receiver), and TK-J21 (2AF pump tank). The same potential problems exist in TK-J5 (3AF pump tank) and TK-N1 (3BU receiver), but the probabilities of reaching a critical condition are not as great. In order to prevent the excessive accumulation of uranium-233 in any of these vessels by an extraction mechanism, it is necessary to maintain the uranium-233 and salting agent concentrations below the point at which a critical concentration of uranium-233 could be reached in a solvent phase.« less

  5. Onboard Safety Systems/Trucking Industry Demographics.

    DOT National Transportation Integrated Search

    2016-11-01

    Research sponsored by the Federal Motor Carrier Safety Administration (FMCSA) in 2008 documented discrete : safety technology investment differences that exist across motor carrier fleet sizes. In response, this research : analyzed the use of onboard...

  6. ISS Crew Transportation and Services Requirements Document

    NASA Technical Reports Server (NTRS)

    Bayt, Robert L. (Compiler); Lueders, Kathryn L. (Compiler)

    2016-01-01

    The ISS Crew Transportation and Services Requirements Document (CCT-REQ-1130) contains all technical, safety, and crew health medical requirements that are mandatory for achieving a Crew Transportation System Certification that will allow for International Space Station delivery and return of NASA crew and limited cargo. Previously approved on TN23183.

  7. 14 CFR 431.33 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

  8. Database management systems for process safety.

    PubMed

    Early, William F

    2006-03-17

    Several elements of the process safety management regulation (PSM) require tracking and documentation of actions; process hazard analyses, management of change, process safety information, operating procedures, training, contractor safety programs, pre-startup safety reviews, incident investigations, emergency planning, and compliance audits. These elements can result in hundreds of actions annually that require actions. This tracking and documentation commonly is a failing identified in compliance audits, and is difficult to manage through action lists, spreadsheets, or other tools that are comfortably manipulated by plant personnel. This paper discusses the recent implementation of a database management system at a chemical plant and chronicles the improvements accomplished through the introduction of a customized system. The system as implemented modeled the normal plant workflows, and provided simple, recognizable user interfaces for ease of use.

  9. Overview of Design, Lifecycle, and Safety for Computer-Based Systems

    NASA Technical Reports Server (NTRS)

    Torres-Pomales, Wilfredo

    2015-01-01

    This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

  10. Degraded document image enhancement

    NASA Astrophysics Data System (ADS)

    Agam, G.; Bal, G.; Frieder, G.; Frieder, O.

    2007-01-01

    Poor quality documents are obtained in various situations such as historical document collections, legal archives, security investigations, and documents found in clandestine locations. Such documents are often scanned for automated analysis, further processing, and archiving. Due to the nature of such documents, degraded document images are often hard to read, have low contrast, and are corrupted by various artifacts. We describe a novel approach for the enhancement of such documents based on probabilistic models which increases the contrast, and thus, readability of such documents under various degradations. The enhancement produced by the proposed approach can be viewed under different viewing conditions if desired. The proposed approach was evaluated qualitatively and compared to standard enhancement techniques on a subset of historical documents obtained from the Yad Vashem Holocaust museum. In addition, quantitative performance was evaluated based on synthetically generated data corrupted under various degradation models. Preliminary results demonstrate the effectiveness of the proposed approach.

  11. 2002 safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2002-07-01

    The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

  12. 2000 Safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2000-08-01

    The objective of this study was to establish 2000 safety belt and child safety seat usage rates in Kentucky. The 2000 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

  13. Hazard Identification and Risk Assessment of Health and Safety Approach JSA (Job Safety Analysis) in Plantation Company

    NASA Astrophysics Data System (ADS)

    Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi

    2017-06-01

    Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.

  14. Interactive BIM-Enabled Safety Training Piloted in Construction Education

    ERIC Educational Resources Information Center

    Clevenger, Caroline; Lopez del Puerto, Carla; Glick, Scott

    2015-01-01

    This paper documents and assesses the development of a construction safety training module featuring interactive, BIM-enabled, 3D visualizations to test if such a tool can enhance safety training related to scaffolds. This research documents the technical challenges and the lessons learned through the development and administration of a prototype…

  15. A comparative analysis of occupational health and safety risk prevention practices in Sweden and Spain.

    PubMed

    Morillas, Rosa María; Rubio-Romero, Juan Carlos; Fuertes, Alba

    2013-12-01

    Scandinavian countries such as Sweden implemented the occupational health and safety (OHS) measures in the European Directive 89/391/EEC earlier than other European counties, including Spain. In fact, statistics on workplace accident rates reveal that between 2004 and 2009, there were considerably fewer accidents in Sweden than in Spain. The objective of the research described in this paper was to reduce workplace accidents and to improve OHS management in Spain by exploring the OHS practices in Sweden. For this purpose, an exploratory comparative study was conducted, which focused on the effectiveness of the EU directive in both countries. The study included a cross-sectional analysis of workplace accident rates and other contextual indicators in both national contexts. A case study of 14 Swedish and Spanish companies identified 14 differences in the preventive practices implemented. These differences were then assessed with a Delphi study to evaluate their contribution to the reduction of workplace accidents and their potential for improving health and safety management in Spain. The results showed that there was agreement concerning 12 of the 14 practices. Finally, we discuss opportunities of improvement in Spanish companies so that they can make their risk management practices more effective. The findings of this comparative study on the implementation of the European Directive 89/391/EEC in both Sweden and Spain have revealed health and safety managerial practices which, if properly implemented, could contribute to improved work conditions and accident statistics of Spanish companies. In particular, the results suggest that Spanish employers, safety managers, external prevention services, safety deputies and Labour Inspectorates should consider implementing streamlined internal preventive management, promoting the integration of prevention responsibilities to the chain of command, and preventing health and safety management from becoming a mere exchange of

  16. The predictive validity of safety climate.

    PubMed

    Johnson, Stephen E

    2007-01-01

    Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group

  17. Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, Curtis L; Mandelli, Diego; Zhegang Ma

    2014-11-01

    As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

  18. E-nursing documentation as a tool for quality assurance.

    PubMed

    Rajkovic, Vladislav; Sustersic, Olga; Rajkovic, Uros

    2006-01-01

    The article presents the results of a project with which we describe the reengineering of nursing documentation. Documentation in nursing is an efficient tool for ensuring quality health care and consequently quality patient treatment along the whole clinical path. We have taken into account the nursing process and patient treatment based on Henderson theoretical model of nursing that consists of 14 basic living activities. The model of new documentation enables tracing, transparency, selectivity, monitoring and analyses. All these factors lead to improvements of a health system as well as to improved safety of patients and members of nursing teams. Thus the documentation was developed for three health care segments: secondary and tertiary level, dispensaries and community health care. The new quality introduced to the documentation process by information and communication technology is presented by a database model and a software prototype for managing documentation.

  19. 41 CFR 102-80.130 - Who must perform the equivalent level of safety analysis?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level of Safety Analysis... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Who must perform the equivalent level of safety analysis? 102-80.130 Section 102-80.130 Public Contracts and Property Management...

  20. Nuclear criticality safety assessment of the low level radioactive waste disposal facility trenches

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kahook, S.D.

    1994-04-01

    Results of the analyses performed to evaluate the possibility of nuclear criticality in the Low Level Radioactive Waste Disposal Facility (LLRWDF) trenches are documented in this report. The studies presented in this document are limited to assessment of the possibility of criticality due to existing conditions in the LLRWDF. This document does not propose nor set limits for enriched uranium (EU) burial in the LLRWDF and is not a nuclear criticality safety evaluation nor analysis. The calculations presented in the report are Level 2 calculations as defined by the E7 Procedure 2.31, Engineering Calculations.

  1. Lattice algebra approach to multispectral analysis of ancient documents.

    PubMed

    Valdiviezo-N, Juan C; Urcid, Gonzalo

    2013-02-01

    This paper introduces a lattice algebra procedure that can be used for the multispectral analysis of historical documents and artworks. Assuming the presence of linearly mixed spectral pixels captured in a multispectral scene, the proposed method computes the scaled min- and max-lattice associative memories to determine the purest pixels that best represent the spectra of single pigments. The estimation of fractional proportions of pure spectra at each image pixel is used to build pigment abundance maps that can be used for subsequent restoration of damaged parts. Application examples include multispectral images acquired from the Archimedes Palimpsest and a Mexican pre-Hispanic codex.

  2. Repository of not readily available documents for project W-320

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Conner, J.C.

    1997-04-18

    The purpose of this document is to provide a readily available source of the technical reports needed for the development of the safety documentation provided for the waste retrieval sluicing system (WRSS), designed to remove the radioactive and chemical sludge from tank 241-C-106, and transport that material to double-shell tank 241-AY-102 via a new, temporary, shielded, encased transfer line.

  3. Development of guidance for states transitioning to new safety analysis tools

    NASA Astrophysics Data System (ADS)

    Alluri, Priyanka

    With about 125 people dying on US roads each day, the US Department of Transportation heightened the awareness of critical safety issues with the passage of SAFETEA-LU (Safe Accountable Flexible Efficient Transportation Equity Act---a Legacy for Users) legislation in 2005. The legislation required each of the states to develop a Strategic Highway Safety Plan (SHSP) and incorporate data-driven approaches to prioritize and evaluate program outcomes: Failure to do so resulted in funding sanctioning. In conjunction with the legislation, research efforts have also been progressing toward the development of new safety analysis tools such as IHSDM (Interactive Highway Safety Design Model), SafetyAnalyst, and HSM (Highway Safety Manual). These software and analysis tools are comparatively more advanced in statistical theory and level of accuracy, and have a tendency to be more data intensive. A review of the 2009 five-percent reports and excerpts from the nationwide survey revealed astonishing facts about the continuing use of traditional methods including crash frequencies and rates for site selection and prioritization. The intense data requirements and statistical complexity of advanced safety tools are considered as a hindrance to their adoption. In this context, this research aims at identifying the data requirements and data availability for SafetyAnalyst and HSM by working with both the tools. This research sets the stage for working with the Empirical Bayes approach by highlighting some of the biases and issues associated with the traditional methods of selecting projects such as greater emphasis on traffic volume and regression-to-mean phenomena. Further, the not-so-obvious issue with shorter segment lengths, which effect the results independent of the methods used, is also discussed. The more reliable and statistically acceptable Empirical Bayes methodology requires safety performance functions (SPFs), regression equations predicting the relation between crashes

  4. Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

    NASA Astrophysics Data System (ADS)

    Melliana, Armen, Yusrizal, Akmal, Syarifah

    2017-11-01

    PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

  5. Safety Evaluation of Roundabouts in Georgia

    DOT National Transportation Integrated Search

    2018-02-28

    Several previous studies have documented significant safety benefits of roundabouts in the United Sates. However, the safety benefits for a given roundabout may vary depending on factors such as the familiarity of the driving population to roundabout...

  6. Safety Evaluation of Roundabouts in Georgia

    DOT National Transportation Integrated Search

    2018-02-02

    Several previous studies have documented significant safety benefits of roundabouts in the United Sates. However, the safety benefits for a given roundabout may vary depending on factors such as the familiarity of the driving population to roundabout...

  7. System for the Analysis of Global Energy Markets - Vol. I, Model Documentation

    EIA Publications

    2003-01-01

    Documents the objectives and the conceptual and methodological approach used in the development of projections for the International Energy Outlook. The first volume of this report describes the System for the Analysis of Global Energy Markets (SAGE) methodology and provides an in-depth explanation of the equations of the model.

  8. Biology Laboratory Safety Manual.

    ERIC Educational Resources Information Center

    Case, Christine L.

    The Centers for Disease Control (CDC) recommends that schools prepare or adapt a biosafety manual, and that instructors develop a list of safety procedures applicable to their own lab and distribute it to each student. In this way, safety issues will be brought to each student's attention. This document is an example of such a manual. It contains…

  9. Improving operating room safety

    PubMed Central

    2009-01-01

    Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety. PMID:19930577

  10. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Analysis Reports for Nuclear Power Plants, or successor document. (2) A DOE nonreactor nuclear facility... with DOE Policy 450.2A, “Identifying, Implementing and Complying with Environment, Safety and Health..., the public and the environment from adverse consequences. These analyses and hazard controls...

  11. Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

    2018-01-01

    The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

  12. Laboratory Safety Guide for Arkansas K-12 Schools.

    ERIC Educational Resources Information Center

    Arkansas State Dept. of Education, Little Rock.

    This document presents laboratory safety rules for Arkansas K-12 schools which were developed by the Arkansas Science Teachers Association (ASTA) and the Arkansas Department of Education (ADE). Contents include: (1) "Laboratory Safety Guide for Arkansas K-12 Schools"; (2) "Safety Considerations"; (3) "Safety Standards for Science Laboratories";…

  13. Registered nurses' decision-making regarding documentation in patients' progress notes.

    PubMed

    Tower, Marion; Chaboyer, Wendy; Green, Quentine; Dyer, Kirsten; Wallis, Marianne

    2012-10-01

    To examine registered nurses' decision-making when documenting care in patients' progress notes. What constitutes effective nursing documentation is supported by available guidelines. However, ineffective documentation continues to be cited as a major cause of adverse events for patients. Decision-making in clinical practice is a complex process. To make an effective decision, the decision-maker must be situationally aware. The concept of situation awareness and its implications for making safe decisions has been examined extensively in air safety and more recently is being applied to health. The study was situated in a naturalistic paradigm. Purposive sampling was used to recruit 17 registered nurses who used think-aloud research methods when making decisions about documenting information in patients' progress notes. Follow-up interviews were conducted to validate interpretations. Data were analysed systematically for evidence of cues that demonstrated situation awareness as nurses made decisions about documentation. Three distinct decision-making scenarios were illuminated from the analysis: the newly admitted patient, the patient whose condition was as expected and the discharging patient. Nurses used mental models for decision-making in documenting in progress notes, and the cues nurses used to direct their assessment of patients' needs demonstrated situation awareness at different levels. Nurses demonstrate situation awareness at different levels in their decision-making processes. While situation awareness is important, it is also important to use an appropriate decision-making framework. Cognitive continuum theory is suggested as a decision-making model that could support situation awareness when nurses made decisions about documenting patient care. Because nurses are key decision-makers, it is imperative that effective decisions are made that translate into safe clinical care. Including situation awareness training, combined with employing cognitive

  14. Transit safety & security statistics & analysis 2003 annual report (formerly SAMIS)

    DOT National Transportation Integrated Search

    2005-12-01

    The Transit Safety & Security Statistics & Analysis 2003 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

  15. Transit safety & security statistics & analysis 2002 annual report (formerly SAMIS)

    DOT National Transportation Integrated Search

    2004-12-01

    The Transit Safety & Security Statistics & Analysis 2002 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...

  16. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  17. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  18. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  19. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  20. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-04-01

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining themore » facility and executing the mission of the High-Level Waste Storage Tank Farms.« less

  1. 33 CFR 96.350 - Interim Document of Compliance certificate: what is it and when can it be used?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Document of Compliance certificate may be issued to help set up a company's safety management system when— (1) A company is newly set up or in transition from an existing company into a new company; or (2) A new type of vessel is added to an existing safety management system and Document of Compliance...

  2. Laboratory Safety Manual for Alabama Schools. Bulletin 1975. No. 20.

    ERIC Educational Resources Information Center

    Alabama State Dept. of Education, Montgomery.

    This document presents the Alabama State Department of Education guidelines for science laboratory safety, equipment, storage, chemical safety, rocket safety, electrical safety, safety with radioisotopes, and safety with biologicals. Also included is a brief bibliography, a teacher's checklist, a listing of laser facts and regulations, and a…

  3. In-service documentation tools and statements on palliative sedation in Germany--do they meet the EAPC framework recommendations? A qualitative document analysis.

    PubMed

    Stiel, Stephanie; Heckel, Maria; Christensen, Britta; Ostgathe, Christoph; Klein, Carsten

    2016-01-01

    Numerous (inter-)national guidelines and frameworks have been developed to provide recommendations for the application of palliative sedation (PS). However, they are still not widely known, and large variations in PS clinical practice can be found. This study aims to collect and describe contents from documents used in clinical practice and to compare to what extent they match the European Association for Palliative Care (EAPC) framework recommendations. In a national survey on PS in Germany 2012, participants were asked to upload their in-service templates, assessment tools, specific protocols, and in-service statements for the application and documentation of PS. These documents are analyzed by using systematic structured content analysis. Three hundred seven content units of 52 provided documents were coded. The analyzed templates are very heterogeneous and also contain items not mentioned in the EAPC framework. Among 11 scales for the evaluation of sedation level, the Ramsey Sedation Score (n = 5) and the Richmond-Agitation-Sedation-Scale (n = 2) were found most often. For symptom assessment, three different scales were provided one time respectively. In all six PS statements, the common core elements were possible indications for PS, instructions on dose titration, patient monitoring, and care. Wide congruency exists for physical and psychological indications. Most documents coincide on midazolam as a preferred drug and basic monitoring in regular intervals. Aspects such as pre-emptive discussion of the potential role of sedation, informational needs of relatives, and care for the medical professionals are mentioned rarely. The analyzed templates do neglect some points of the EAPC recommendations. However, they expand the ten-point scheme of the framework in some details. The findings may facilitate the development of standardized consensus documentation and monitoring draft as an operational statement.

  4. 10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2013-01-01 2013-01-01 false Contents of applications; technical information in final...

  5. 10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2012-01-01 2012-01-01 false Contents of applications; technical information in final...

  6. 10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2014-01-01 2014-01-01 false Contents of applications; technical information in final...

  7. 10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2011-01-01 2011-01-01 false Contents of applications; technical information in final...

  8. Efficacy and safety profile of xanthines in COPD: a network meta-analysis.

    PubMed

    Cazzola, Mario; Calzetta, Luigino; Barnes, Peter J; Criner, Gerard J; Martinez, Fernando J; Papi, Alberto; Gabriella Matera, Maria

    2018-06-30

    Theophylline can still have a role in the management of stable chronic obstructive pulmonary disease (COPD), but its use remains controversial, mainly due to its narrow therapeutic window. Doxofylline, another xanthine, is an effective bronchodilator and displays a better safety profile than theophylline. Therefore, we performed a quantitative synthesis to compare the efficacy and safety profile of different xanthines in COPD.The primary end-point of this meta-analysis was the impact of xanthines on lung function. In addition, we assessed the risk of adverse events by normalising data on safety as a function of person-weeks. Data obtained from 998 COPD patients were selected from 14 studies and meta-analysed using a network approach.The combined surface under the cumulative ranking curve (SUCRA) analysis of efficacy (change from baseline in forced expiratory volume in 1 s) and safety (risk of adverse events) showed that doxofylline was superior to aminophylline (comparable efficacy and significantly better safety), bamiphylline (significantly better efficacy and comparable safety), and theophylline (comparable efficacy and significantly better safety).Considering the overall efficacy/safety profile of the investigated agents, the results of this quantitative synthesis suggest that doxofylline seems to be the best xanthine for the treatment of COPD. Copyright ©ERS 2018.

  9. Child Transportation Safety Tips.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    This document presents nine tips regarding safe infant and child transportation, each tip explained in one to two pages. The tips are as follows: (1) quick safety seat checkup; (2) where should your child ride? (3) how to protect your new baby in the car; (4) what safety seat to use for a big baby or toddler? (5) how should preschool and school…

  10. 46 CFR 71.75-13 - Safety Management Certificate.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Safety Management Certificate. 71.75-13 Section 71.75-13... CERTIFICATION Certificates Under the International Convention for Safety of Life at Sea, 1960 § 71.75-13 Safety... valid Safety Management Certificate and a copy of their company's valid Document of Compliance...

  11. Ward round template: enhancing patient safety on ward rounds.

    PubMed

    Gilliland, Niall; Catherwood, Natalie; Chen, Shaouyn; Browne, Peter; Wilson, Jacob; Burden, Helena

    2018-01-01

    Concerns had been raised at clinical governance regarding the safety of our inpatient ward rounds with particular reference to: documentation of clinical observations and National Early Warning Score (NEWS), compliance with Trust guidance for venous thromboembolism (VTE) risk assessment, antibiotic stewardship, palliative care and treatment escalation plans (TEP). This quality improvement project was conceived to ensure these parameters were considered and documented during the ward round, thereby improving patient care and safety. These parameters were based on Trust patient safety guidance and CQUIN targets. The quality improvement technique of plan-do-study-act (PDSA) was used in this project. We retrospectively reviewed ward round entries to record baseline measurements, based on the above described parameters, prior to making any changes. Following this, the change applied was the introduction of a ward round template to include the highlighted important baseline parameters. Monthly PDSA cycles are performed, and baseline measurements are re-examined, then relevant changes were made to the ward round template. Documentation of baseline measurements was poor prior to introduction of the ward round template; this improved significantly following introduction of a standardised ward round template. Following three cycles, documentation of VTE risk assessments increased from 14% to 92%. Antibiotic stewardship documentation went from 0% to 100%. Use of the TEP form went from 29% to 78%. Following introduction of the ward round template, compliance improved significantly in all safety parameters. Important safety measures being discussed on ward rounds will lead to enhanced patient safety and will improve compliance to Trust guidance and comissioning for quality and innovation (CQUIN) targets. Ongoing change implementation will focus on improving compliance with usage of the template on all urology ward rounds.

  12. Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

    NASA Technical Reports Server (NTRS)

    Goltz, G.; Kaiser, L. M.; Weiner, H.

    1977-01-01

    A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

  13. Safety analysis of interchanges

    DOT National Transportation Integrated Search

    2007-06-01

    The objectives of this research are to synthesize the current state of knowledge concerning the safety assessment of new or modified interchanges; develop a spreadsheet-based computational tool for performing safety assessments of interchanges; and i...

  14. Electronics. Module 1: Electronic Safety. Instructor's Guide.

    ERIC Educational Resources Information Center

    Tharp, Bill

    This guide contains instructor's materials for a three-unit secondary school course on electronic safety. The units are shop safety principles, hand tools, and alternating current safety and protection devices. The document begins with advice on its use and a cross-referenced table of instructional materials that show which materials in the guide…

  15. Safety for Older Consumers. Home Safety Checklist.

    ERIC Educational Resources Information Center

    Consumer Product Safety Commission, Washington, DC.

    A home safety checklist geared to the needs of older adults is presented in this document. The beginning of the checklist highlights potential hazards which may need to be checked in more than one area of the home, such as electric cords, smoke detectors, rugs, telephone areas, and emergency exit plans. The rest of the checklist is organized…

  16. The use of fingerprints available on the web in false identity documents: Analysis from a forensic intelligence perspective.

    PubMed

    Girelli, Carlos Magno Alves

    2016-05-01

    Fingerprints present in false identity documents were found on the web. In some cases, laterally reversed (mirrored) images of a same fingerprint were observed in different documents. In the present work, 100 fingerprints images downloaded from the web, as well as their reversals obtained by image editing, were compared between themselves and against the database of the Brazilian Federal Police AFIS, in order to better understand trends about this kind of forgery in Brazil. Some image editing effects were observed in the analyzed fingerprints: addition of artifacts (such as watermarks), image rotation, image stylization, lateral reversal and tonal reversal. Discussion about lateral reversals' detection is presented in this article, as well as suggestion to reduce errors due to missed HIT decisions between reversed fingerprints. The present work aims to highlight the importance of the fingerprints' analysis when performing document examination, especially when only copies of documents are available, something very common in Brazil. Besides the intrinsic features of the fingermarks considered in three levels of details by ACE-V methodology, some visual features of the fingerprints images can be helpful to identify sources of forgeries and modus operandi, such as: limits and image contours, fails in the friction ridges caused by excess or lack of inking and presence of watermarks and artifacts arising from the background. Based on the agreement of such features in fingerprints present in different identity documents and also on the analysis of the time and location where the documents were seized, it is possible to highlight potential links between apparently unconnected crimes. Therefore, fingerprints have potential to reduce linkage blindness and the present work suggests the analysis of fingerprints when profiling false identity documents, as well as the inclusion of fingerprints features in the profile of the documents. Copyright © 2016 Elsevier Ireland Ltd. All

  17. A game of Chinese whispers in Malaysia: contextual analysis of child road safety education.

    PubMed

    Puvanachandra, Prasanthi; Kulanthayan, Subramaniam; Hyder, Adnan A

    2012-11-01

    In 2006, the Malaysian government began implementing road safety education (RSE) programs in primary schools, involving numerous stakeholders. We interviewed 19 stakeholders. Thematic analysis led to the identification of four themes: road traffic injuries (RTIs) among children in Malaysia, the role of RSE, factors affecting successful implementation, and intersectoral involvement. The latter was identified as a significant strength of the overall approach to implementation, and is one of the first examples in Malaysia and in the region of such an approach. Lack of official documentation surrounding ownership, funding responsibilities, and roles among the various sectors led to resistance from some groups. Although we know from scientific studies what works in terms of reducing RTIs, the more important question is how such interventions can be successfully and sustainably implemented, particularly in low- and middle-income countries (LMIC). The results of this study permit stronger understanding of issues surrounding the implementation of RTI interventions in LMIC.

  18. Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

    PubMed

    Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

    2018-04-01

    We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

  19. Safety in the Science Classroom

    ERIC Educational Resources Information Center

    Online Submission, 2006

    2006-01-01

    The goal of this K-12 science safety resource is to bring together information needed by administrators, planners, teachers and support staff to help them make sound decisions regarding science safety. The document identifies areas for decision making and action at a variety of levels. It supports planning and action by providing information on…

  20. RPP-PRT-58489, Revision 1, One Systems Consistent Safety Analysis Methodologies Report. 24590-WTP-RPT-MGT-15-014

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gupta, Mukesh; Niemi, Belinda; Paik, Ingle

    2015-09-02

    In 2012, One System Nuclear Safety performed a comparison of the safety bases for the Tank Farms Operations Contractor (TOC) and Hanford Tank Waste Treatment and Immobilization Plant (WTP) (RPP-RPT-53222 / 24590-WTP-RPT-MGT-12-018, “One System Report of Comparative Evaluation of Safety Bases for Hanford Waste Treatment and Immobilization Plant Project and Tank Operations Contract”), and identified 25 recommendations that required further evaluation for consensus disposition. This report documents ten NSSC approved consistent methodologies and guides and the results of the additional evaluation process using a new set of evaluation criteria developed for the evaluation of the new methodologies.

  1. 14 CFR 417.213 - Flight safety limits analysis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

  2. 14 CFR 417.213 - Flight safety limits analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

  3. 14 CFR 417.213 - Flight safety limits analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

  4. 14 CFR 417.213 - Flight safety limits analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

  5. 14 CFR 417.213 - Flight safety limits analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

  6. Document similarity measures and document browsing

    NASA Astrophysics Data System (ADS)

    Ahmadullin, Ildus; Fan, Jian; Damera-Venkata, Niranjan; Lim, Suk Hwan; Lin, Qian; Liu, Jerry; Liu, Sam; O'Brien-Strain, Eamonn; Allebach, Jan

    2011-03-01

    Managing large document databases is an important task today. Being able to automatically com- pare document layouts and classify and search documents with respect to their visual appearance proves to be desirable in many applications. We measure single page documents' similarity with respect to distance functions between three document components: background, text, and saliency. Each document component is represented as a Gaussian mixture distribution; and distances between dierent documents' components are calculated as probabilistic similarities between corresponding distributions. The similarity measure between documents is represented as a weighted sum of the components' distances. Using this document similarity measure, we propose a browsing mechanism operating on a document dataset. For these purposes, we use a hierarchical browsing environment which we call the document similarity pyramid. It allows the user to browse a large document dataset and to search for documents in the dataset that are similar to the query. The user can browse the dataset on dierent levels of the pyramid, and zoom into the documents that are of interest.

  7. Rural expressway intersection safety toolbox : desktop reference.

    DOT National Transportation Integrated Search

    2011-06-01

    This document is intended to be a guide for planning-level decisions concerning safety : issues and subsequent potential improvements at rural expressway intersections. It is : NOT a design guide. It simply presents the gamut of safety treatment opti...

  8. The culture of patient safety in an Iranian intensive care unit.

    PubMed

    Abdi, Zhaleh; Delgoshaei, Bahram; Ravaghi, Hamid; Abbasi, Mohsen; Heyrani, Ali

    2015-04-01

    To explore nurses' and physicians' attitudes and perceptions relevant to safety culture and to elicit strategies to promote safety culture in an intensive care unit. A strong safety culture is essential to ensure patient safety in the intensive care unit. This case study adopted a mixed method design. The Safety Attitude Questionnaire (SAQ-ICU version), assessing the safety climate through six domains, was completed by nurses and physicians (n = 42) in an academic intensive care unit. Twenty semi-structured interviews and document analyses were conducted as well. Interviews were analysed using a framework analysis method. Mean scores across the six domains ranged from 52.3 to 72.4 on a 100-point scale. Further analysis indicated that there were statistically significant differences between physicians' and nurses' attitudes toward teamwork (mean scores: 64.5/100 vs. 52.6/100, d = 1.15, t = 3.69, P < 0.001) and job satisfaction (mean scores: 78.2/100 vs. 57.7/100, d = 1.5, t = 4.8, P < 0.001). Interviews revealed several safety challenges including underreporting, failure to learn from errors, lack of speaking up, low job satisfaction among nurses and ineffective nurse-physician communication. The results indicate that all the domains need improvements. However, further attention should be devoted to error reporting and analysis, communication and teamwork among professional groups, and nurses' job satisfaction. Nurse managers can contribute to promoting a safety culture by encouraging staff to report errors, fostering learning from errors and addressing inter-professional communication problems. © 2013 John Wiley & Sons Ltd.

  9. Equity in public health standards: a qualitative document analysis of policies from two Canadian provinces

    PubMed Central

    2012-01-01

    Introduction Promoting health equity is a key goal of many public health systems. However, little is known about how equity is conceptualized in such systems, particularly as standards of public health practice are established. As part of a larger study examining the renewal of public health in two Canadian provinces, Ontario and British Columbia (BC), we undertook an analysis of relevant public health documents related to equity. The aim of this paper is to discuss how equity is considered within documents that outline standards for public health. Methods A research team consisting of policymakers and academics identified key documents related to the public health renewal process in each province. The documents were analyzed using constant comparative analysis to identify key themes related to the conceptualization and integration of health equity as part of public health renewal in Ontario and BC. Documents were coded inductively with higher levels of abstraction achieved through multiple readings. Sets of questions were developed to guide the analysis throughout the process. Results In both sets of provincial documents health inequities were defined in a similar fashion, as the consequence of unfair or unjust structural conditions. Reducing health inequities was an explicit goal of the public health renewal process. In Ontario, addressing “priority populations” was used as a proxy term for health equity and the focus was on existing programs. In BC, the incorporation of an equity lens enhanced the identification of health inequities, with a particular emphasis on the social determinants of health. In both, priority was given to reducing barriers to public health services and to forming partnerships with other sectors to reduce health inequities. Limits to the accountability of public health to reduce health inequities were identified in both provinces. Conclusion This study contributes to understanding how health equity is conceptualized and incorporated

  10. Experiment Design and Analysis Guide - Neutronics & Physics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Misti A Lillo

    2014-06-01

    The purpose of this guide is to provide a consistent, standardized approach to performing neutronics/physics analysis for experiments inserted into the Advanced Test Reactor (ATR). This document provides neutronics/physics analysis guidance to support experiment design and analysis needs for experiments irradiated in the ATR. This guide addresses neutronics/physics analysis in support of experiment design, experiment safety, and experiment program objectives and goals. The intent of this guide is to provide a standardized approach for performing typical neutronics/physics analyses. Deviation from this guide is allowed provided that neutronics/physics analysis details are properly documented in an analysis report.

  11. Mines Systems Safety Improvement Using an Integrated Event Tree and Fault Tree Analysis

    NASA Astrophysics Data System (ADS)

    Kumar, Ranjan; Ghosh, Achyuta Krishna

    2017-04-01

    Mines systems such as ventilation system, strata support system, flame proof safety equipment, are exposed to dynamic operational conditions such as stress, humidity, dust, temperature, etc., and safety improvement of such systems can be done preferably during planning and design stage. However, the existing safety analysis methods do not handle the accident initiation and progression of mine systems explicitly. To bridge this gap, this paper presents an integrated Event Tree (ET) and Fault Tree (FT) approach for safety analysis and improvement of mine systems design. This approach includes ET and FT modeling coupled with redundancy allocation technique. In this method, a concept of top hazard probability is introduced for identifying system failure probability and redundancy is allocated to the system either at component or system level. A case study on mine methane explosion safety with two initiating events is performed. The results demonstrate that the presented method can reveal the accident scenarios and improve the safety of complex mine systems simultaneously.

  12. Evolution of Safety Analysis to Support New Exploration Missions

    NASA Technical Reports Server (NTRS)

    Thrasher, Chard W.

    2008-01-01

    NASA is currently developing the Ares I launch vehicle as a key component of the Constellation program which will provide safe and reliable transportation to the International Space Station, back to the moon, and later to Mars. The risks and costs of the Ares I must be significantly lowered, as compared to other manned launch vehicles, to enable the continuation of space exploration. It is essential that safety be significantly improved, and cost-effectively incorporated into the design process. This paper justifies early and effective safety analysis of complex space systems. Interactions and dependences between design, logistics, modeling, reliability, and safety engineers will be discussed to illustrate methods to lower cost, reduce design cycles and lessen the likelihood of catastrophic events.

  13. Baltimore-Washington Parkway, Maryland : traffic safety plan

    DOT National Transportation Integrated Search

    2015-06-01

    Over the past decade, a number of studies have documented the traffic safety issues on the National Park Services (NPS) portion of the Baltimore-Washington (B-W) Parkway. The Baltimore-Washington Parkway Traffic Safety Plan provides an action plan...

  14. 10 CFR 72.70 - Safety analysis report updating.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.70 Section 72.70 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Records...

  15. 10 CFR 70.62 - Safety program and integrated safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

  16. 10 CFR 70.62 - Safety program and integrated safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

  17. 10 CFR 70.62 - Safety program and integrated safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

  18. Safety of High Speed Magnetic Levitation Transportation Systems : Magnetic Field Testing of TR-07 Maglev Vehicle. Volume 1. Analysis.

    DOT National Transportation Integrated Search

    1992-04-01

    The safety of various magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is of direct concern to the Federal Railroad Administration (FRA). This report catalogs and documents detailed magnet...

  19. Nuclear criticality safety evaluation of SRS 9971 shipping package

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vescovi, P.J.

    1993-02-01

    This evaluation is requested to revise the criticality evaluation used to generate Chapter 6 (Criticality Evaluation) of the Safety Analysis Report for Packaging (SARP) for shipment Of UO{sub 3} product from the Uranium Solidification Facility (USF) in the SRS 9971 shipping package. The pertinent document requesting this evaluation is included as Attachment I. The results of the evaluation are given in Attachment II which is written as Chapter 6 of a NRC format SARP.

  20. Health and Safety Adoption from Use of a Risk Assessment Document on Irish Farms.

    PubMed

    McNamara, John; Griffin, Patrick; Kinsella, James; Phelan, James

    2017-01-01

    This article describes levels of implementation of occupational health and safety (OHS) controls on a sample of Irish farms following completion of a risk assessment document (RAD) made available as part of a statutory code of practice (COP) for the agriculture sector. The article describes the legislation mandating the COP and the operation of a prevention initiative (PI) among key stakeholders to develop and promote farmer use of the COP and RAD. RADs were collected for farmers (N = 475) and the number and type of OHS controls listed for action were tabulated. A farm audit of OHS standards and of implementation of controls listed for action in the RAD was undertaken among a randomly selected sample of farms (N = 94) where the RAD was completed. The study data indicates that farmers used the RAD to a limited extent, and that their focus in its use was on identifying physical rather than organizational controls. An association was found between farmers who actively implemented controls and positive OHS standards. Farm OHS standards were also associated with farmer attitude to OHS, farm enterprise, farmer age category, and work time needed to operate the farm. Overall, the study data suggests that standards of farm management are a crucial determinant of OHS standards. The study data also indicates that having knowledge of required OHS controls does not ensure implementation. Development of social learning in groups is considered as a significant means of increasing OHS farm adoption.

  1. SER assistant: An expert system for safety evaluation reports

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DeChaine, M.D.; Levine, S.H.; Feltus, M.A.

    1993-01-01

    The SER Assistant is an expert system that assists engineers to write safety evaluation reports (SERs). Section 50.59 of the Code of Federal Regulations allows modifications to be made to nuclear power plants without prior US Nuclear Regulatory Commission approval if two conditions are satisfied. First, the change must not affect the technical specifications of the plant. Second, the modification must not affect a part of the plant described in the final safety analysis report, or if it does, it must not create an unreviewed safety question. The purpose of an SER is to ensure that these conditions are satisfiedmore » for the proposed modification. The SER Assistant aids this process by providing relevant, but directed, questions and information as well as giving engineers an organized environment to document their thought processes.« less

  2. On the typography of flight-deck documentation

    NASA Technical Reports Server (NTRS)

    Degani, Asaf

    1992-01-01

    Many types of paper documentation are employed on the flight-deck. They range from a simple checklist card to a bulky Aircraft Flight Manual (AFM). Some of these documentations have typographical and graphical deficiencies; yet, many cockpit tasks such as conducting checklists, way-point entry, limitations and performance calculations, and many more, require the use of these documents. Moreover, during emergency and abnormal situations, the flight crews' effectiveness in combating the situation is highly dependent on such documentation; accessing and reading procedures has a significant impact on flight safety. Although flight-deck documentation are an important (and sometimes critical) form of display in the modern cockpit, there is a dearth of information on how to effectively design these displays. The object of this report is to provide a summary of the available literature regarding the design and typographical aspects of printed matter. The report attempts 'to bridge' the gap between basic research about typography, and the kind of information needed by designers of flight-deck documentation. The report focuses on typographical factors such as type-faces, character height, use of lower- and upper-case characters, line length, and spacing. Some graphical aspects such as layout, color coding, fonts, and character contrast are also discussed. In addition, several aspects of cockpit reading conditions such as glare, angular alignment, and paper quality are addressed. Finally, a list of recommendations for the graphical design of flight-deck documentation is provided.

  3. Implementation Procedure for STS Payloads, System Safety Requirements

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Guidelines and instructions for the implementation of the SP&R system safety requirements applicable to STS payloads are provided. The initial contact meeting with the payload organization and the subsequent safety reviews necessary to comply with the system safety requirements of the SP&R document are described. Waiver instructions are included for the cases in which a safety requirement cannot be met.

  4. Analysis of factors influencing safety management for metro construction in China.

    PubMed

    Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

    2014-07-01

    With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. 43 CFR 46.140 - Using tiered documents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... documents. A NEPA document that tiers to another broader NEPA document in accordance with 40 CFR 1508.28 must include a finding that the conditions and environmental effects described in the broader NEPA... identified and analyzed in the broader NEPA document, no further analysis is necessary, and the previously...

  6. 43 CFR 46.140 - Using tiered documents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... documents. A NEPA document that tiers to another broader NEPA document in accordance with 40 CFR 1508.28 must include a finding that the conditions and environmental effects described in the broader NEPA... identified and analyzed in the broader NEPA document, no further analysis is necessary, and the previously...

  7. 43 CFR 46.140 - Using tiered documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... documents. A NEPA document that tiers to another broader NEPA document in accordance with 40 CFR 1508.28 must include a finding that the conditions and environmental effects described in the broader NEPA... identified and analyzed in the broader NEPA document, no further analysis is necessary, and the previously...

  8. 43 CFR 46.140 - Using tiered documents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... documents. A NEPA document that tiers to another broader NEPA document in accordance with 40 CFR 1508.28 must include a finding that the conditions and environmental effects described in the broader NEPA... identified and analyzed in the broader NEPA document, no further analysis is necessary, and the previously...

  9. 43 CFR 46.140 - Using tiered documents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... documents. A NEPA document that tiers to another broader NEPA document in accordance with 40 CFR 1508.28 must include a finding that the conditions and environmental effects described in the broader NEPA... identified and analyzed in the broader NEPA document, no further analysis is necessary, and the previously...

  10. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  11. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  12. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  13. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  14. Initial empirical analysis of nuclear power plant organization and its effect on safety performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olson, J.; McLaughlin, S.D.; Osborn, R.N.

    This report contains an analysis of the relationship between selected aspects of organizational structure and the safety-related performance of nuclear power plants. The report starts by identifying and operationalizing certain key dimensions of organizational structure that may be expected to be related to plant safety performance. Next, indicators of plant safety performance are created by combining existing performance measures into more reliable indicators. Finally, the indicators of plant safety performance using correlational and discriminant analysis. The overall results show that plants with better developed coordination mechanisms, shorter vertical hierarchies, and a greater number of departments tend to perform more safely.

  15. Data collection and analysis for local roadway safety assessment.

    DOT National Transportation Integrated Search

    2014-11-01

    The project Data Analysis for Local Roadway : Assessment conducted systematic road-safety : assessment and identified major risks that can be el : iminated or reduced by pr : actical road-improvement : measures. Specifically, the primary task o...

  16. Current Sports: Medicine Issues. Annual Safety Education Review--1973.

    ERIC Educational Resources Information Center

    Craig, Timothy T., Ed.

    This document is a collection of papers whose theme is sports safety. Section one, "Government Interest in Sports Safety," includes an article on Washington, D.C.'s focus on sports safety. Section two, "Medical Aspects of Safety in Sports," includes articles regarding the medical basis of restriction from athletics, orthopaedic restrictions, and…

  17. Mobile site safety review for the transuranic (TRU) waste characterization program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1996-11-01

    This Safety Review Document (SRD) applies to the Active/Passive Neutron Examination and Assay (APNEA) system installed on a Lockheed Martin Specialty Components, Inc., (Specialty Components) trailer. The APNEA is designed to perform nuclear waste drum assay. The purpose of this document is to describe the safety features of the APNEA system.

  18. Integrating Data From the UK National Reporting and Learning System With Work Domain Analysis to Understand Patient Safety Incidents in Community Pharmacy.

    PubMed

    Phipps, Denham L; Tam, W Vanessa; Ashcroft, Darren M

    2017-03-01

    To explore the combined use of a critical incident database and work domain analysis to understand patient safety issues in a health-care setting. A retrospective review was conducted of incidents reported to the UK National Reporting and Learning System (NRLS) that involved community pharmacy between April 2005 and August 2010. A work domain analysis of community pharmacy was constructed using observational data from 5 community pharmacies, technical documentation, and a focus group with 6 pharmacists. Reports from the NRLS were mapped onto the model generated by the work domain analysis. Approximately 14,709 incident reports meeting the selection criteria were retrieved from the NRLS. Descriptive statistical analysis of these reports found that almost all of the incidents involved medication and that the most frequently occurring error types were dose/strength errors, incorrect medication, and incorrect formulation. The work domain analysis identified 4 overall purposes for community pharmacy: business viability, health promotion and clinical services, provision of medication, and use of medication. These purposes were served by lower-order characteristics of the work system (such as the functions, processes and objects). The tasks most frequently implicated in the incident reports were those involving medication storage, assembly, or patient medication records. Combining the insights from different analytical methods improves understanding of patient safety problems. Incident reporting data can be used to identify general patterns, whereas the work domain analysis can generate information about the contextual factors that surround a critical task.

  19. Interpersonal relationships and safety culture in Brazilian health care organisations.

    PubMed

    Migowski, Eliana R; Oliveira Júnior, Nery; Riegel, Fernando; Migowski, Sérgio A

    2018-06-20

    To examine the association between interpersonal relationships, nursing leadership and patient safety culture and the impact on the efficiency of hospitals. Hospitals are still affected by the increased complexity of the treatments offered and by the diverse knowledge of professionals involved, which has made this assistance model ineffective, expensive and unsustainable over time. A qualitative study of 32 professionals from three large hospitals in Southern Brazil was made. Semi-structured interviews, document analysis and analysis of electronic records were used. All the hospitals had infection rates and an average stay higher than their goal. Lack of interpersonal relationships and physicians failing to commit to organisational objectives were demonstrated. Nursing leadership styles are not definitive factors to improving patient safety and efficiency. The flaws in consolidating interpersonal relationships seem to be related to difficulties in consolidating patient safety culture, which prevented hospitals reaching their efficiency indicators. Professionals who work at the patients' bedside should be involved in the development of strategies, in order to commit them to the organisational objectives. The consolidation of interpersonal relationships of nursing professionals can lead to improvements with medical professionals, with positive impacts on patient safety and efficiency. © 2018 John Wiley & Sons Ltd.

  20. The communicative construction of safety in wildland firefighting

    Treesearch

    Jody Jahn; Linda L. Putnam; Anne E. Black

    2012-01-01

    This document is a summary of a mixed methods dissertation that examined the communicative construction of safety in wildland firefighting. For the dissertation, I used a two-study mixed methods approach, examining the communicative accomplishment of safety from two perspectives: high reliability organizing (Weick, Sutcliffe, & Obstfeld, 1999), and safety climate (...

  1. Clinical efficacy and safety of mesenchymal stem cell transplantation for osteoarthritis treatment: A meta-analysis

    PubMed Central

    Li, Li; Tao, Sun; Bo, Lin; Lin, Chen

    2017-01-01

    Purpose The aim of this study was to evaluate the therapeutic efficacy and safety of mesenchymal stem cells (MSCs) for the treatment of patients with knee osteoarthritis (OA). Materials We performed a meta-analysis of relevant published clinical studies. An electronic search was conducted for randomized controlled trials (RCTs) of MSC-based therapy in knee OA. The visual analogue scale (VAS), International Knee Documentation Committee (IKDC) form, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Lequesne algofunctional indices (Lequesne), Lysholm knee scale (Lysholm), Tegner activity scale (Tegner) and adverse events (AEs) were evaluated. Results Eleven eligible trials with 582 knee OA patients were included in the present meta-analysis. We demonstrated that MSC treatment could significantly decrease VAS and increase IKDC scoresafter a 24-month follow-up compared with controls (P<0.05). MSC therapy also showed significant decreases in WOMAC and Lequesne scores after the 12-month follow-up (P<0.01). Analysis of Lysholm (24-month) and Tegner (12- and 24-month) scores also demonstrated favorable results for MSC treatment (P<0.05). Conclusion Overall, MSC transplantation treatment was shown to be safe and has great potential as an efficacious clinical therapy for patients with knee OA. PMID:28448518

  2. Review of the Constellation Level II Safety, Reliability, and Quality Assurance (SR&QA) Requirements Documents during Participation in the Constellation Level II SR&QA Forum

    NASA Technical Reports Server (NTRS)

    Cameron, Kenneth D.; Gentz, Steven J.; Beil, Robert J.; Minute, Stephen A.; Currie, Nancy J.; Scott, Steven S.; Thomas, Walter B., III; Smiles, Michael D.; Schafer, Charles F.; Null, Cynthia H.; hide

    2009-01-01

    At the request of the Exploration Systems Mission Directorate (ESMD) and the Constellation Program (CxP) Safety, Reliability; and Quality Assurance (SR&QA) Requirements Director, the NASA Engineering and Safety Center (NESC) participated in the Cx SR&QA Requirements forum. The Requirements Forum was held June 24-26; 2008, at GRC's Plum Brook Facility. The forums purpose was to gather all stakeholders into a focused meeting to help complete the process of refining the CxP to refine its Level II SR&QA requirements or defining project-specific requirements tailoring. Element prime contractors had raised specific questions about the wording and intent of many requirements in areas they felt were driving costs without adding commensurate value. NESC was asked to provide an independent and thorough review of requirements that contractors believed were driving Program costs, by active participation in the forum. This document contains information from the forum.

  3. Introduction to LNG vehicle safety

    NASA Astrophysics Data System (ADS)

    Bratvold, Delma; Friedman, David; Chernoff, Harry; Farkhondehpay, Dariush; Comay, Claudia

    1994-03-01

    Basic information on the characteristics of liquefied natural gas (LNG) is assembled to provide an overview of safety issues and practices for the use of LNG vehicles. This document is intended for those planning or considering the use of LNG vehicles, including vehicle fleet owners and operators, public transit officials and boards, local fire and safety officials, manufacturers and distributors, and gas industry officials. Safety issues and mitigation measures that should be considered for candidate LNG vehicle projects are addressed.

  4. 14 CFR 417.103 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 417.103 Section 417... organization. (a) A launch operator must maintain and document a safety organization. A launch operator must... within the launch operator's organization and between the launch operator and any federal launch range or...

  5. F14A System Safety Program Plan

    DTIC Science & Technology

    1981-09-03

    by block number) Electromagnetic Pulse (EMP) Safety Plans Test Program EMP Testing F14 Aircraft Plans 20 ABSTRACT (Continue on reverse side if...compromising completion of the required experimental tasks. This document addresses the safety aspect of performing an Electromagnetic Pulse (EMP) test

  6. Electrical Safety: Safety and Health for Electrical Trades. Student Manual.

    ERIC Educational Resources Information Center

    Fowler, Thaddeus W.; Miles, Karen K.

    This document is designed to teach learners in secondary and postsecondary electrical trades courses to recognize, evaluate, and control hazards associated with electrical work, The manual's eight sections each include some or all of the following components: instructional text; definitions; case studies illustrating key safety considerations;…

  7. 14 CFR 415.131 - Flight safety system crew data.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety system crew data. 415.131... Launch Vehicle From a Non-Federal Launch Site § 415.131 Flight safety system crew data. (a) An applicant's safety review document must identify each flight safety system crew position and the role of that...

  8. Connected commercial vehicles — retrofit safety device kit project : data acquisition system (DAS) documentation.

    DOT National Transportation Integrated Search

    2014-03-01

    Connected vehicle wireless data communications can enable safety applications that may reduce injuries and fatalities. Cooperative vehicle-to-vehicle (V2V) safety applications will be effective only if a high fraction of vehicles are equipped. Deploy...

  9. Nuclear criticality safety calculational analysis for small-diameter containers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    LeTellier, M.S.; Smallwood, D.J.; Henkel, J.A.

    This report documents calculations performed to establish a technical basis for the nuclear criticality safety of favorable geometry containers, sometimes referred to as 5-inch containers, in use at the Portsmouth Gaseous Diffusion Plant. A list of containers currently used in the plant is shown in Table 1.0-1. These containers are currently used throughout the plant with no mass limits. The use of containers with geometries or material types other than those addressed in this evaluation must be bounded by this analysis or have an additional analysis performed. The following five basic container geometries were modeled and bound all container geometriesmore » in Table 1.0-1: (1) 4.32-inch-diameter by 50-inch-high polyethylene bottle; (2) 5.0-inch-diameter by 24-inch-high polyethylene bottle; (3) 5.25-inch-diameter by 24-inch-high steel can ({open_quotes}F-can{close_quotes}); (4) 5.25-inch-diameter by 15-inch-high steel can ({open_quotes}Z-can{close_quotes}); and (5) 5.0-inch-diameter by 9-inch-high polybottle ({open_quotes}CO-4{close_quotes}). Each container type is evaluated using five basic reflection and interaction models that include single containers and multiple containers in normal and in credible abnormal conditions. The uranium materials evaluated are UO{sub 2}F{sub 2}+H{sub 2}O and UF{sub 4}+oil materials at 100% and 10% enrichments and U{sub 3}O{sub 8}, and H{sub 2}O at 100% enrichment. The design basis safe criticality limit for the Portsmouth facility is k{sub eff} + 2{sigma} < 0.95. The KENO study results may be used as the basis for evaluating general use of these containers in the plant.« less

  10. Comparison of historical documents for writership

    NASA Astrophysics Data System (ADS)

    Ball, Gregory R.; Pu, Danjun; Stritmatter, Roger; Srihari, Sargur N.

    2010-01-01

    Over the last century forensic document science has developed progressively more sophisticated pattern recognition methodologies for ascertaining the authorship of disputed documents. These include advances not only in computer assisted stylometrics, but forensic handwriting analysis. We present a writer verification method and an evaluation of an actual historical document written by an unknown writer. The questioned document is compared against two known handwriting samples of Herman Melville, a 19th century American author who has been hypothesized to be the writer of this document. The comparison led to a high confidence result that the questioned document was written by the same writer as the known documents. Such methodology can be applied to many such questioned documents in historical writing, both in literary and legal fields.

  11. System safety education focused on flight safety

    NASA Technical Reports Server (NTRS)

    Holt, E.

    1971-01-01

    The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

  12. Total safety management: An approach to improving safety culture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Blush, S.M.

    A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobylmore » nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair.« less

  13. 33 CFR 96.220 - What makes up a safety management system?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The safety management system must document the responsible person's— (1) Safety and pollution prevention...

  14. NACA documents database project

    NASA Technical Reports Server (NTRS)

    Smith, Ruth S.

    1991-01-01

    The plan to get all the National Advisory Committee on Aeronautics (NACA) collection online, with quality records, led to the NACA Documents Data base Project. The project has a two fold purpose: (1) to develop the definitive bibliography of NACA produced and/or held documents; and (2) to make that bibliography and the associated documents available to the aerospace community. This study supports the first objective by providing an analysis of the NACA collection and its bibliographic records, and supports the second objective by defining the NACA archive and recommending methodologies for meeting the project objectives.

  15. Software Dependability and Safety Evaluations ESA's Initiative

    NASA Astrophysics Data System (ADS)

    Hernek, M.

    ESA has allocated funds for an initiative to evaluate Dependability and Safety methods of Software. The objectives of this initiative are; · More extensive validation of Safety and Dependability techniques for Software · Provide valuable results to improve the quality of the Software thus promoting the application of Dependability and Safety methods and techniques. ESA space systems are being developed according to defined PA requirement specifications. These requirements may be implemented through various design concepts, e.g. redundancy, diversity etc. varying from project to project. Analysis methods (FMECA. FTA, HA, etc) are frequently used during requirements analysis and design activities to assure the correct implementation of system PA requirements. The criticality level of failures, functions and systems is determined and by doing that the critical sub-systems are identified, on which dependability and safety techniques are to be applied during development. Proper performance of the software development requires the development of a technical specification for the products at the beginning of the life cycle. Such technical specification comprises both functional and non-functional requirements. These non-functional requirements address characteristics of the product such as quality, dependability, safety and maintainability. Software in space systems is more and more used in critical functions. Also the trend towards more frequent use of COTS and reusable components pose new difficulties in terms of assuring reliable and safe systems. Because of this, its dependability and safety must be carefully analysed. ESA identified and documented techniques, methods and procedures to ensure that software dependability and safety requirements are specified and taken into account during the design and development of a software system and to verify/validate that the implemented software systems comply with these requirements [R1].

  16. Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DAVIS, S.J.

    2000-12-28

    This document identifies critical characteristics of components to be dedicated for use in Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common, radiation area, monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF) for use in safety significant systems. System modifications are to be performed in accordance with the approved design. Components for this change are commercially available and interchangeable with the existing alarm configuration This documentmore » focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

  17. Analysis respons to the implementation of nuclear installations safety culture using AHP-TOPSIS

    NASA Astrophysics Data System (ADS)

    Situmorang, J.; Kuntoro, I.; Santoso, S.; Subekti, M.; Sunaryo, G. R.

    2018-02-01

    An analysis of responses to the implementation of nuclear installations safety culture has been done using AHP (Analitic Hierarchy Process) - TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution). Safety culture is considered as collective commitments of the decision-making level, management level, and individual level. Thus each level will provide a subjective perspective as an alternative approach to implementation. Furthermore safety culture is considered by the statement of five characteristics which in more detail form consist of 37 attributes, and therefore can be expressed as multi-attribute state. Those characteristics and or attributes will be a criterion and its value is difficult to determine. Those criteria of course, will determine and strongly influence the implementation of the corresponding safety culture. To determine the pattern and magnitude of the influence is done by using a TOPSIS that is based on decision matrix approach and is composed of alternatives and criteria. The weight of each criterion is determined by AHP technique. The data used are data collected through questionnaires at the workshop on safety and health in 2015. .Reliability test of data gives Cronbah Alpha value of 95.5% which according to the criteria is stated reliable. Validity test using bivariate correlation analysis technique between each attribute give Pearson correlation for all attribute is significant at level 0,01. Using confirmatory factor analysis gives Kaise-Meyer-Olkin of sampling Adequacy (KMO) is 0.719 and it is greater than the acceptance criterion 0.5 as well as the 0.000 significance level much smaller than 0.05 and stated that further analysis could be performed. As a result of the analysis it is found that responses from the level of decision maker (second echelon) dominate the best order preference rank to be the best solution in strengthening the nuclear installation safety culture, except for the first characteristics, safety is a

  18. 76 FR 5494 - Pipeline Safety: Mechanical Fitting Failure Reporting Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-01

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Safety: Mechanical Fitting Failure Reporting Requirements AGENCY: Pipeline and Hazardous Materials Safety... tightening. A widely accepted industry guidance document, Gas Pipeline Technical Committee (GPTC) Guide, does...

  19. Sandia National Laboratories/New Mexico Environmental Information Document - Volume 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BAYLISS, LINDA S.; GUERRERO, JOSEPH V.; JOHNS, WILLIAM H.

    This Sandia National Laboratories/New Mexico Environmental Information Document (EID) compiles information on the existing environment, or environmental baseline, for SNUNM. Much of the information is drawn from existing reports and databases supplemented by new research and data. The SNL/NM EID, together with the Sandia National Laboratories/New Mexico Facilities and Safety Information Document, provide a basis for assessing the environment, safety, and health aspects of operating selected facilities at SNL/NM. The environmental baseline provides a record of the existing physical, biological, and socioeconomic environment at SNL/NLM prior to being altered (beneficially or adversely) by proposed programs or projects. More specifically, themore » EID provides information on the following topics: Geology; Land Use; Hydrology and Water Resources; Air Quality and Meteorology; Ecology; Noise and Vibration; Cultural Resources; Visual Resources; Socioeconomic and Community Services; Transportation; Material Management; Waste Management; and Regulatory Requirements.« less

  20. Triangulation and the importance of establishing valid methods for food safety culture evaluation.

    PubMed

    Jespersen, Lone; Wallace, Carol A

    2017-10-01

    The research evaluates maturity of food safety culture in five multi-national food companies using method triangulation, specifically self-assessment scale, performance documents, and semi-structured interviews. Weaknesses associated with each individual method are known but there are few studies in food safety where a method triangulation approach is used for both data collection and data analysis. Significantly, this research shows that individual results taken in isolation can lead to wrong conclusions, resulting in potentially failing tactics and wasted investments. However, by applying method triangulation and reviewing results from a range of culture measurement tools it is possible to better direct investments and interventions. The findings add to the food safety culture paradigm beyond a single evaluation of food safety culture using generic culture surveys. Copyright © 2017. Published by Elsevier Ltd.

  1. 76 FR 10295 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-24

    ... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... framework for the nationwide public safety broadband network. This document considers and proposes... broadband networks operating in the 700 MHz band. This document addresses public safety broadband network...

  2. Laboratory Biosafety and Biosecurity Risk Assessment Technical Guidance Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Astuto-Gribble, Lisa M; Caskey, Susan Adele

    2014-07-01

    The purpose of this document is threefold: 1) to describe the laboratory bio safety and biosecurity risk assessment process and its conceptual framework; 2) provide detailed guidance and suggested methodologies on how to conduct a risk assessment; and 3) present some practical risk assessment process strategies using realistic laboratory scenarios.

  3. Vocabulary of aerospace safety terms pertaining to cryogenic safety, fires, explosions, and structure failure

    NASA Technical Reports Server (NTRS)

    Pelouch, J. J., Jr.; Mandel, G.; Ordin, P. M.

    1976-01-01

    This vocabulary listing characterizes the contents of over 10,000 documents of the NASA Aerospace Safety Research and Data Institute's (ASRDI) safety engineering collection. The ASRDI collection is now one of the series accessible on the NASA RECON data base. There are approximately 6,300 postable terms that describe literature in the areas of cryogenic fluid safety, specifically hydrogen, oxygen, liquified natural gas; fire and explosion technology; and the mechanics of structural failure. To facilitate the proper selection of information nonpostable, related and array terms have been included in this listing.

  4. Information Scanning and Processing at the Nuclear Safety Information Center.

    ERIC Educational Resources Information Center

    Parks, Celia; Julian, Carol

    This report is a detailed manual of the information specialist's duties at the Nuclear Safety Information Center. Information specialists scan the literature for documents to be reviewed, procure the documents (books, journal articles, reports, etc.), keep the document location records, and return the documents to the plant library or other…

  5. Implications of electronic health record downtime: an analysis of patient safety event reports.

    PubMed

    Larsen, Ethan; Fong, Allan; Wernz, Christian; Ratwani, Raj M

    2018-02-01

    We sought to understand the types of clinical processes, such as image and medication ordering, that are disrupted during electronic health record (EHR) downtime periods by analyzing the narratives of patient safety event report data. From a database of 80 381 event reports, 76 reports were identified as explicitly describing a safety event associated with an EHR downtime period. These reports were analyzed and categorized based on a developed code book to identify the clinical processes that were impacted by downtime. We also examined whether downtime procedures were in place and followed. The reports were coded into categories related to their reported clinical process: Laboratory, Medication, Imaging, Registration, Patient Handoff, Documentation, History Viewing, Delay of Procedure, and General. A majority of reports (48.7%, n = 37) were associated with lab orders and results, followed by medication ordering and administration (14.5%, n = 11). Incidents commonly involved patient identification and communication of clinical information. A majority of reports (46%, n = 35) indicated that downtime procedures either were not followed or were not in place. Only 27.6% of incidents (n = 21) indicated that downtime procedures were successfully executed. Patient safety report data offer a lens into EHR downtime-related safety hazards. Important areas of risk during EHR downtime periods were patient identification and communication of clinical information; these should be a focus of downtime procedure planning to reduce safety hazards. EHR downtime events pose patient safety hazards, and we highlight critical areas for downtime procedure improvement. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  6. Advancing perinatal patient safety through application of safety science principles using health IT.

    PubMed

    Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

    2017-12-19

    The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated

  7. Assessing the safety effects of cooperative intelligent transport systems: A bowtie analysis approach.

    PubMed

    Ehlers, Ute Christine; Ryeng, Eirin Olaussen; McCormack, Edward; Khan, Faisal; Ehlers, Sören

    2017-02-01

    The safety effects of cooperative intelligent transport systems (C-ITS) are mostly unknown and associated with uncertainties, because these systems represent emerging technology. This study proposes a bowtie analysis as a conceptual framework for evaluating the safety effect of cooperative intelligent transport systems. These seek to prevent road traffic accidents or mitigate their consequences. Under the assumption of the potential occurrence of a particular single vehicle accident, three case studies demonstrate the application of the bowtie analysis approach in road traffic safety. The approach utilizes exemplary expert estimates and knowledge from literature on the probability of the occurrence of accident risk factors and of the success of safety measures. Fuzzy set theory is applied to handle uncertainty in expert knowledge. Based on this approach, a useful tool is developed to estimate the effects of safety-related cooperative intelligent transport systems in terms of the expected change in accident occurrence and consequence probability. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. An integrated safety analysis of intravenous ibuprofen (Caldolor®) in adults

    PubMed Central

    Southworth, Stephen R; Woodward, Emily J; Peng, Alex; Rock, Amy D

    2015-01-01

    Intravenous (IV) nonsteroidal anti-inflammatory drugs such as IV ibuprofen are increasingly used as a component of multimodal pain management in the inpatient and outpatient settings. The safety of IV ibuprofen as assessed in ten sponsored clinical studies is presented in this analysis. Overall, 1,752 adult patients have been included in safety and efficacy trials over 11 years; 1,220 of these patients have received IV ibuprofen and 532 received either placebo or comparator medication. The incidence of adverse events (AEs), serious AEs, and changes in vital signs and clinically significant laboratory parameters have been summarized and compared to patients receiving placebo or active comparator drug. Overall, IV ibuprofen has been well tolerated by hospitalized and outpatient patients when administered both prior to surgery and postoperatively as well as for nonsurgical pain or fever. The overall incidence of AEs is lower in patients receiving IV ibuprofen as compared to those receiving placebo in this integrated analysis. Specific analysis of hematological and renal effects showed no increased risk for patients receiving IV ibuprofen. A subset analysis of elderly patients suggests that no dose adjustment is needed in this higher risk population. This integrated safety analysis demonstrates that IV ibuprofen can be safely administered prior to surgery and continued in the postoperative period as a component of multimodal pain management. PMID:26604816

  9. A general concept for consistent documentation of computational analyses

    PubMed Central

    Müller, Fabian; Nordström, Karl; Lengauer, Thomas; Schulz, Marcel H.

    2015-01-01

    The ever-growing amount of data in the field of life sciences demands standardized ways of high-throughput computational analysis. This standardization requires a thorough documentation of each step in the computational analysis to enable researchers to understand and reproduce the results. However, due to the heterogeneity in software setups and the high rate of change during tool development, reproducibility is hard to achieve. One reason is that there is no common agreement in the research community on how to document computational studies. In many cases, simple flat files or other unstructured text documents are provided by researchers as documentation, which are often missing software dependencies, versions and sufficient documentation to understand the workflow and parameter settings. As a solution we suggest a simple and modest approach for documenting and verifying computational analysis pipelines. We propose a two-part scheme that defines a computational analysis using a Process and an Analysis metadata document, which jointly describe all necessary details to reproduce the results. In this design we separate the metadata specifying the process from the metadata describing an actual analysis run, thereby reducing the effort of manual documentation to an absolute minimum. Our approach is independent of a specific software environment, results in human readable XML documents that can easily be shared with other researchers and allows an automated validation to ensure consistency of the metadata. Because our approach has been designed with little to no assumptions concerning the workflow of an analysis, we expect it to be applicable in a wide range of computational research fields. Database URL: http://deep.mpi-inf.mpg.de/DAC/cmds/pub/pyvalid.zip PMID:26055099

  10. Technology applications for traffic safety programs : a primer

    DOT National Transportation Integrated Search

    2008-09-01

    This document explores how emerging digital and communications technology can advance safety on the Nations highways. The range of technology described in this report is available or will be available in the near future to improve traffic safety. ...

  11. Safety analysis, 200 Area, Savannah River Plant: Separations area operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Perkins, W.C.; Lee, R.; Allen, P.M.

    1991-07-01

    The nev HB-Line, located on the fifth and sixth levels of Building 221-H, is designed to replace the aging existing HB-Line production facility. The nev HB-Line consists of three separate facilities: the Scrap Recovery Facility, the Neptunium Oxide Facility, and the Plutonium Oxide Facility. There are three separate safety analyses for the nev HB-Line, one for each of the three facilities. These are issued as supplements to the 200-Area Safety Analysis (DPSTSA-200-10). These supplements are numbered as Sup 2A, Scrap Recovery Facility, Sup 2B, Neptunium Oxide Facility, Sup 2C, Plutonium Oxide Facility. The subject of this safety analysis, the, Plutoniummore » Oxide Facility, will convert nitrate solutions of {sup 238}Pu to plutonium oxide (PuO{sub 2}) powder. All these new facilities incorporate improvements in: (1) engineered barriers to contain contamination, (2) barriers to minimize personnel exposure to airborne contamination, (3) shielding and remote operations to decrease radiation exposure, and (4) equipment and ventilation design to provide flexibility and improved process performance.« less

  12. Development of the FHR advanced natural circulation analysis code and application to FHR safety analysis

    DOE PAGES

    Guo, Z.; Zweibaum, N.; Shao, M.; ...

    2016-04-19

    The University of California, Berkeley (UCB) is performing thermal hydraulics safety analysis to develop the technical basis for design and licensing of fluoride-salt-cooled, high-temperature reactors (FHRs). FHR designs investigated by UCB use natural circulation for emergency, passive decay heat removal when normal decay heat removal systems fail. The FHR advanced natural circulation analysis (FANCY) code has been developed for assessment of passive decay heat removal capability and safety analysis of these innovative system designs. The FANCY code uses a one-dimensional, semi-implicit scheme to solve for pressure-linked mass, momentum and energy conservation equations. Graph theory is used to automatically generate amore » staggered mesh for complicated pipe network systems. Heat structure models have been implemented for three types of boundary conditions (Dirichlet, Neumann and Robin boundary conditions). Heat structures can be composed of several layers of different materials, and are used for simulation of heat structure temperature distribution and heat transfer rate. Control models are used to simulate sequences of events or trips of safety systems. A proportional-integral controller is also used to automatically make thermal hydraulic systems reach desired steady state conditions. A point kinetics model is used to model reactor kinetics behavior with temperature reactivity feedback. The underlying large sparse linear systems in these models are efficiently solved by using direct and iterative solvers provided by the SuperLU code on high performance machines. Input interfaces are designed to increase the flexibility of simulation for complicated thermal hydraulic systems. In conclusion, this paper mainly focuses on the methodology used to develop the FANCY code, and safety analysis of the Mark 1 pebble-bed FHR under development at UCB is performed.« less

  13. Procedure for Failure Mode, Effects, and Criticality Analysis (FMECA)

    NASA Technical Reports Server (NTRS)

    1966-01-01

    This document provides guidelines for the accomplishment of Failure Mode, Effects, and Criticality Analysis (FMECA) on the Apollo program. It is a procedure for analysis of hardware items to determine those items contributing most to system unreliability and crew safety problems.

  14. Applying a sociolinguistic model to the analysis of informed consent documents.

    PubMed

    Granero-Molina, José; Fernández-Sola, Cayetano; Aguilera-Manrique, Gabriel

    2009-11-01

    Information on the risks and benefits related to surgical procedures is essential for patients in order to obtain their informed consent. Some disciplines, such as sociolinguistics, offer insights that are helpful for patient-professional communication in both written and oral consent. Communication difficulties become more acute when patients make decisions through an informed consent document because they may sign this with a lack of understanding and information, and consequently feel deprived of their freedom to make their choice about different treatments or surgery. This article discusses findings from documentary analysis using the sociolinguistic SPEAKING model, which was applied to the general and specific informed consent documents required for laparoscopic surgery of the bile duct at Torrecárdenas Hospital, Almería, Spain. The objective of this procedure was to identify flaws when information was provided, together with its readability, its voluntary basis, and patients' consent. The results suggest potential linguistic communication difficulties, different languages being used, cultural clashes, asymmetry of communication between professionals and patients, assignment of rights on the part of patients, and overprotection of professionals and institutions.

  15. Safety analysts training

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bolton, P.

    The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

  16. Pretest analysis document for Test S-NH-1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Owca, W.A.

    This report documents the pretest analysis calculation completed with the RELAP5/MOD2/CY3601 code for Semiscale MOD-2C Test S-NH-1. The test will simulate the shear of a small diameter penetration of a cold leg, equivalent to 0.5% of the cold leg flow area. The high pressure injection system is assumed to be inoperative throughout the transient. The recovery procedure consists of latching open both steam generator ADV's while feeding with auxiliary feedwater, and accumulator operation. Recovery will be initiated upon a peak cladding temperature of 811 K (1000/sup 0/F). The test will be terminated when primary pressure has been reduced to themore » low pressure injection system setpoint of 1.38 MPa (200 psia). The calculated results indicate that the test objectives can be achieved and the proposed test scenario poses no threat to personnel or to plant integrity. 12 figs.« less

  17. Sources of Safety Data and Statistical Strategies for Design and Analysis: Postmarket Surveillance.

    PubMed

    Izem, Rima; Sanchez-Kam, Matilde; Ma, Haijun; Zink, Richard; Zhao, Yueqin

    2018-03-01

    Safety data are continuously evaluated throughout the life cycle of a medical product to accurately assess and characterize the risks associated with the product. The knowledge about a medical product's safety profile continually evolves as safety data accumulate. This paper discusses data sources and analysis considerations for safety signal detection after a medical product is approved for marketing. This manuscript is the second in a series of papers from the American Statistical Association Biopharmaceutical Section Safety Working Group. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from passive postmarketing surveillance systems compared to other sources. Signal detection has traditionally relied on spontaneous reporting databases that have been available worldwide for decades. However, current regulatory guidelines and ease of reporting have increased the size of these databases exponentially over the last few years. With such large databases, data-mining tools using disproportionality analysis and helpful graphics are often used to detect potential signals. Although the data sources have many limitations, analyses of these data have been successful at identifying safety signals postmarketing. Experience analyzing these dynamic data is useful in understanding the potential and limitations of analyses with new data sources such as social media, claims, or electronic medical records data.

  18. Traffic safety for older people : 5-year plan.

    DOT National Transportation Integrated Search

    2013-12-01

    This document is intended to serve as the plan for National Highway Traffic Safety Administration activities to address traffic safety concerns of older people. Given the increasing proportion of older people in the population, NHTSA must work in con...

  19. MCPS School Safety & Security at a Glance 2011-2012

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2012

    2012-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  20. MCPS School Safety & Security at a Glance 2013-2014

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2014

    2014-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  1. MCPS School Safety & Security at a Glance 2012-2013

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2013

    2013-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  2. Open Source Patient-Controlled Analgesic Pump Requirements Documentation

    PubMed Central

    Larson, Brian R.; Hatcliff, John; Chalin, Patrice

    2014-01-01

    The dynamic nature of the medical domain is driving a need for continuous innovation and improvement in techniques for developing and assuring medical devices. Unfortunately, research in academia and communication between academics, industrial engineers, and regulatory authorities is hampered by the lack of realistic non-proprietary development artifacts for medical devices. In this paper, we give an overview of a detailed requirements document for a Patient-Controlled Analgesic (PCA) pump developed under the US NSF’s Food and Drug Administration (FDA) Scholar-in-Residence (SIR) program. This 60+ page document follows the methodology outlined in the US Federal Aviation Administrations (FAA) Requirements Engineering Management Handbook (REMH) and includes a domain overview, use cases, statements of safety & security requirements, and formal top-level system architectural description. Based on previous experience with release of a requirements document for a cardiac pacemaker that spawned a number of research and pedagogical activities, we believe that the described PCA requirements document can be an important research enabler within the formal methods and software engineering communities. PMID:24931440

  3. Advanced Air Transportation Technologies Project, Final Document Collection

    NASA Technical Reports Server (NTRS)

    Mogford, Richard H.; Wold, Sheryl (Editor)

    2008-01-01

    This CD ROM contains a compilation of the final documents of the Advanced Air Transportation Technologies (AAIT) project, which was an eight-year (1996 to 2004), $400M project managed by the Airspace Systems Program office, which was part of the Aeronautics Research Mission Directorate at NASA Headquarters. AAIT focused on developing advanced automation tools and air traffic management concepts that would help improve the efficiency of the National Airspace System, while maintaining or enhancing safety. The documents contained in the CD are final reports on AAIT tasks that serve to document the project's accomplishments over its eight-year term. Documents include information on: Advanced Air Transportation Technologies, Autonomous Operations Planner, Collaborative Arrival Planner, Distributed Air/Ground Traffic Management Concept Elements 5, 6, & 11, Direct-To, Direct-To Technology Transfer, Expedite Departure Path, En Route Data Exchange, Final Approach Spacing Tool - (Active and Passive), Multi-Center Traffic Management Advisor, Multi Center Traffic Management Advisor Technology Transfer, Surface Movement Advisor, Surface Management System, Surface Management System Technology Transfer and Traffic Flow Management Research & Development.

  4. Qualitative analysis of national documents on health care services and pharmaceuticals` purchasing challenges: evidence from Iran.

    PubMed

    Bastani, Peivand; Samadbeik, Mahnaz; Dinarvand, Rassoul; Kashefian-Naeeini, Sara; Vatankhah, Soudabeh

    2018-06-05

    Iranian health sector encountered many challenges in resource allocation and health service purchasing during the past decades, the aim of this study was to determine the main challenges of the present process of health service purchasing for national policymakers and other developing countries with the same setting. It was a qualitative study carried out via the complete content analysis of all relevant national documents from 2007 to 2014. In order to retrieve the related documents, we searched the official websites related to the Ministry of Health and Medical Education, four main Iranian insurance organizations, the Health Committee of the Parliament Profile, strategic vice president's site and Supreme Insurance Council. After recognition of documents, their credibility and authenticity were evaluated in terms of their publication or adjustment. For the analysis of documents, the four step-Scott method was used applying MAXQDA version 10. Findings illustrated that health service purchase challenges in the country can be classified in 6 main themes of policy-making, executive, intersectional, natural, legal and informational challenges with 26 subthemes. Furthermore, 5 themes of Basic Benefit Package, Reimbursement,Decision making, Technology and Contract are considered as the main Challenges in pharmaceutical purchasing area containing 13 relevant subthemes. It seems that according to documents, Iran has faced many structural and procedural problems with the purchase of the best health interventions. So it is highly recommended to consider consequences derived from the present challenges and try to use these evidences in their policy making process to decrease the existed problems and move to better procurement of health interventions.

  5. [Problems of safety regulation under radioactive waste management in Russia].

    PubMed

    Monastyrskaia, S G; Kochetkov, O A; Barchukov, V G; Kuznetsova, L I

    2012-01-01

    Analysis of the requirements of Federal Law N 190 "About radioactive waste management and incorporation of changes into some legislative acts of the Russian Federation", as well as normative-legislative documents actual and planned to be published related to provision of radiation protection of the workers and the public have been done. Problems of safety regulation raised due to different approaches of Rospotrebnadzor, FMBA of Russia, Rostekhnadzor and Minprirody with respect to classification and categorization of the radioactive wastes, disposal, exemption from regulatory control, etc. have been discussed in the paper. Proposals regarding improvement of the system of safety regulation under radioactive waste management and of cooperation of various regulatory bodies have been formulated.

  6. Quality and Safety Aspects of Cereals (Wheat) and Their Products.

    PubMed

    Varzakas, Theo

    2016-11-17

    Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

  7. Pilot production system cost/benefit analysis: Digital document storage project

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The Digital Document Storage (DDS)/Pilot Production System (PPS) will provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The DDS/PPS will result in major benefits, such as improved document reproduction quality within a shorter time frame than is currently possible. In addition, the DDS/PPS will provide an important strategic value through the construction of a digital document archive. It is highly recommended that NASA proceed with the DDS Prototype System and a rapid prototyping development methodology in order to validate recent working assumptions upon which the success of the DDS/PPS is dependent.

  8. Crime, perceived safety, and physical activity: A meta-analysis.

    PubMed

    Rees-Punia, Erika; Hathaway, Elizabeth D; Gay, Jennifer L

    2018-06-01

    Perceived safety from crime and objectively-measured crime rates may be associated with physical inactivity. The purpose of this meta-analysis is to estimate the odds of accumulating high levels of physical activity (PA) when the perception of safety from crime is high and when objectively-measured crime is high. Peer-reviewed studies were identified through PubMed, Web of Science, ProQuest Criminal Justice, and ScienceDirect from earliest record through 2016. Included studies measured total PA, leisure-time PA, or walking in addition to perceived safety from crime or objective measures of crime. Mean odds ratios were aggregated with random effects models, and meta-regression was used to examine effects of potential moderators: country, age, and crime/PA measure. Sixteen cross-sectional studies yielded sixteen effects for perceived safety from crime and four effects for objective crime. Those reporting feeling safe from crime had a 27% greater odds of achieving higher levels of physical activity (OR=1.27 [1.08, 1.49]), and those living in areas with higher objectively-measured crime had a 28% reduced odds of achieving higher levels of physical activity (OR=0.72 [0.61, 0.83]). Effects of perceived safety were highly heterogeneous (I 2 =94.09%), but explored moderators were not statistically significant, likely because of the small sample size. Despite the limited number of effects suitable for aggregation, the mean association between perceived safety and PA was significant. As it seems likely that perceived lack of safety from crime constrains PA behaviors, future research exploring moderators of this association may help guide public health recommendations and interventions. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Documents of the JPL Photovoltaics Program Analysis and Integration Center: An annotated bibliography

    NASA Technical Reports Server (NTRS)

    Pearson, A. M.

    1985-01-01

    A bibliography of internal and external documents produced by the Jet Propulsion Laboratory, based on the work performed by the Photovoltaics Program Analysis and Integration Center, is presented with annotations. As shown in the Table of Contents, the bibliography is divided into three subject areas: (1) Assessments, (2) Methdological Studies, and (3) Supporting Studies. Annotated abstracts are presented for 20 papers.

  10. Urban and suburban arterial safety performance functions : final report.

    DOT National Transportation Integrated Search

    2016-06-30

    This report documents findings from a comprehensive set of safety performance functions developed for the entire urban-suburban : arterial road segment system on the state highway system in Washington. Conventional urban suburban safety performance :...

  11. Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials.

    PubMed

    Guttman, Nurit

    2015-11-01

    Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. The growth of partnerships to support patient safety practice adoption.

    PubMed

    Mendel, Peter; Damberg, Cheryl L; Sorbero, Melony E S; Varda, Danielle M; Farley, Donna O

    2009-04-01

    To document the numbers and types of interorganizational partnerships within the national patient safety domain, changes over time in these networks, and their potential for disseminating patient safety knowledge and practices. Self-reported information gathered from representatives of national-level organizations active in promoting patient safety. Social network analysis was used to examine the structure and composition of partnership networks and changes between 2004 and 2006. Two rounds of structured telephone interviews (n=35 organizations in 2004 and 55 in 2006). Patient safety partnerships expanded between 2004 and 2006. The average number of partnerships per interviewed organization increased 40 percent and activities per reported partnership increased over 50 percent. Partnerships increased in all activity domains, particularly dissemination and tools development. Fragmentation of the overall partnership network decreased and potential for information flow increased. Yet network centralization increased, suggesting vulnerability to partnership failure if key participants disengage. Growth in partnerships signifies growing strength in the capacity to disseminate and implement patient safety advancements in the U.S. health care system. The centrality of AHRQ in these networks of partnerships bodes well for its leadership role in disseminating information, tools, and practices generated by patient safety research projects.

  13. 32 CFR 989.23 - Contractor prepared documents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Contractor prepared documents. 989.23 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.23 Contractor prepared documents. All Air Force... should reflect on the cover sheet they are an Air Force document. Contractor preparation information...

  14. Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

    NASA Technical Reports Server (NTRS)

    Withrow, Colleen A.; Reveley, Mary S.

    2014-01-01

    This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

  15. Overview: The Design, Adoption, and Analysis of a Visual Document Mining Tool for Investigative Journalists.

    PubMed

    Brehmer, Matthew; Ingram, Stephen; Stray, Jonathan; Munzner, Tamara

    2014-12-01

    For an investigative journalist, a large collection of documents obtained from a Freedom of Information Act request or a leak is both a blessing and a curse: such material may contain multiple newsworthy stories, but it can be difficult and time consuming to find relevant documents. Standard text search is useful, but even if the search target is known it may not be possible to formulate an effective query. In addition, summarization is an important non-search task. We present Overview, an application for the systematic analysis of large document collections based on document clustering, visualization, and tagging. This work contributes to the small set of design studies which evaluate a visualization system "in the wild", and we report on six case studies where Overview was voluntarily used by self-initiated journalists to produce published stories. We find that the frequently-used language of "exploring" a document collection is both too vague and too narrow to capture how journalists actually used our application. Our iterative process, including multiple rounds of deployment and observations of real world usage, led to a much more specific characterization of tasks. We analyze and justify the visual encoding and interaction techniques used in Overview's design with respect to our final task abstractions, and propose generalizable lessons for visualization design methodology.

  16. 76 FR 5537 - Electronic On-Board Recorders and Hours of Service Supporting Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-01

    ...The Federal Motor Carrier Safety Administration (FMCSA) proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to require certain motor carriers operating commercial motor vehicles (CMVs) in interstate commerce to use electronic on-board recorders (EOBRs) to document their drivers' hours of service (HOS). Under this proposal, all motor carriers currently required to maintain Records of Duty Status (RODS) for HOS recordkeeping would be required to use EOBRs to systematically and effectively monitor their drivers' compliance with HOS requirements. Additionally, this proposal sets forth the supporting documents that all motor carriers currently required to use RODS would still be required to obtain and keep, as required by section 113(a) of the Hazardous Materials Transportation Authorization Act (HMTAA). It explains, however, that although motor carriers subject to the proposed EOBR requirements would still need to retain some supporting documents, they would be relieved of the requirements to retain supporting documents to verify driving time. FMCSA also proposes to require all motor carriers--both RODS and timecard users--to systematically monitor their drivers' compliance with HOS requirements. Motor carriers would be given 3 years after the effective date of the final rule to comply with these requirements.

  17. Macro-level safety analysis of pedestrian crashes in Shanghai, China.

    PubMed

    Wang, Xuesong; Yang, Junguang; Lee, Chris; Ji, Zhuoran; You, Shikai

    2016-11-01

    Pedestrian safety has become one of the most important issues in the field of traffic safety. This study aims at investigating the association between pedestrian crash frequency and various predictor variables including roadway, socio-economic, and land-use features. The relationships were modeled using the data from 263 Traffic Analysis Zones (TAZs) within the urban area of Shanghai - the largest city in China. Since spatial correlation exists among the zonal-level data, Bayesian Conditional Autoregressive (CAR) models with seven different spatial weight features (i.e. (a) 0-1 first order, adjacency-based, (b) common boundary-length-based, (c) geometric centroid-distance-based, (d) crash-weighted centroid-distance-based, (e) land use type, adjacency-based, (f) land use intensity, adjacency-based, and (g) geometric centroid-distance-order) were developed to characterize the spatial correlations among TAZs. Model results indicated that the geometric centroid-distance-order spatial weight feature, which was introduced in macro-level safety analysis for the first time, outperformed all the other spatial weight features. Population was used as the surrogate for pedestrian exposure, and had a positive effect on pedestrian crashes. Other significant factors included length of major arterials, length of minor arterials, road density, average intersection spacing, percentage of 3-legged intersections, and area of TAZ. Pedestrian crashes were higher in TAZs with medium land use intensity than in TAZs with low and high land use intensity. Thus, higher priority should be given to TAZs with medium land use intensity to improve pedestrian safety. Overall, these findings can help transportation planners and managers understand the characteristics of pedestrian crashes and improve pedestrian safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. An approach to model reactor core nodalization for deterministic safety analysis

    NASA Astrophysics Data System (ADS)

    Salim, Mohd Faiz; Samsudin, Mohd Rafie; Mamat @ Ibrahim, Mohd Rizal; Roslan, Ridha; Sadri, Abd Aziz; Farid, Mohd Fairus Abd

    2016-01-01

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to be employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH1.6, stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D® computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M.

  19. An approach to model reactor core nodalization for deterministic safety analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Salim, Mohd Faiz, E-mail: mohdfaizs@tnb.com.my; Samsudin, Mohd Rafie, E-mail: rafies@tnb.com.my; Mamat Ibrahim, Mohd Rizal, E-mail: m-rizal@nuclearmalaysia.gov.my

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to bemore » employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH{sub 1.6}, stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D{sup ®} computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M.« less

  20. Differences in reporting of analyses in internal company documents versus published trial reports: comparisons in industry-sponsored trials in off-label uses of gabapentin.

    PubMed

    Vedula, S Swaroop; Li, Tianjing; Dickersin, Kay

    2013-01-01

    Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards