C-Band Airport Surface Communications System Engineering-Initial High-Level Safety Risk Assessment and Mitigation

NASA Technical Reports Server (NTRS)

Zelkin, Natalie; Henriksen, Stephen

2011-01-01

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.

DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vessard, S.G.

1995-12-31

In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

[The role of safety climate and the relationship with job satisfaction: an exploratory study across three different occupational contexts.

PubMed

Emanuel, Federica; Colombo, Lara; Cortese, Claudio G; Ghislieri, Chiara

2017-12-01

This study examined the role of the "safety climate", or the organization's attention to health and safety of workers, and of job demand and resources in relation with job satisfaction. Wellbeing at work is a topic of growing interest, in line with the legislation and the programs on health and safety of workers and management and the evaluation of psychosocial risks. Several studies show that organizational actions concerning health and safety can be an indicator of the attention to employees' wellbeing, even if studies about the relationship between safety climate and some psychosocial outcomes are scant. The study analysed the relationship between job demand, job resources, safety climate and job satisfaction in three different occupational contexts (public authority, N = 224; social care organization, N = 115; pharmaceutical company, N = 127); workers were divided into groups based on the risk level appeared in the objective assessment of work-related stress, in order to identify differences. The self-report questionnaire gathered information about: job satisfaction, work efforts, supervisors' support, colleagues support, safety climate (α between .72 and .93). Data analysis provided: Cronbach α, analysis of variance, correlations, stepwise multiple regressions. The results showed that job satisfaction (R2 between .23 and .88) had a negative relationship with efforts and a positive relationship with job resources and safety climate. It emerges the importance of safety climate: to support and promote wellbeing at work, organizations could endorse training and information programs on health and safety for all workers and management, not only for professional groups with high-risk level. Future studies could explore the relation between safety climate and other outcomes, such as emotional exhaustion or objective indicators of organizational health (e.g. absenteeism, accidents, etc.). Copyright© by Aracne Editrice, Roma, Italy.

Impact of Safety Training and Interventions on Training-Transfer: Targeting Migrant Construction Workers.

PubMed

Hussain, Rahat; Pedro, Akeem; Lee, Do Yeop; Pham, Hai Chien; Park, Chan Sik

2018-05-01

Despite substantial efforts to improve construction safety training, the accident rate of migrant workers is still high. One of the primary factors contributing to the inefficacy of training includes information delivery gaps during training sessions (knowledge-transfer). In addition, there is insufficient evidence that these training programs alone are effective enough to enable migrant workers to transfer their skills to jobsite (training-transfer). This research attempts to identify and evaluate additional interventions to improve the transfer of acquired knowledge to workplace. For this purpose, this study presents the first known experimental effort to assess the effect of interventions on migrant work groups in a multinational construction project in Qatar. Data analysis reveals that the adoption of training programs with the inclusion of interventions significantly improves training-transfer. Construction safety experts can leverage the findings of this study to enhance training-transfer by increasing worker's safety performance and hazard identification ability.

An Organizational Learning Framework for Patient Safety.

PubMed

Edwards, Marc T

Despite concerted effort to improve quality and safety, high reliability remains a distant goal. Although this likely reflects the challenge of organizational change, persistent controversy over basic issues suggests that weaknesses in conceptual models may contribute. The essence of operational improvement is organizational learning. This article presents a framework for identifying leverage points for improvement based on organizational learning theory and applies it to an analysis of current practice and controversy. Organizations learn from others, from defects, from measurement, and from mindfulness. These learning modes correspond with contemporary themes of collaboration, no blame for human error, accountability for performance, and managing the unexpected. The collaborative model has dominated improvement efforts. Greater attention to the underdeveloped modes of organizational learning may foster more rapid progress in patient safety by increasing organizational capabilities, strengthening a culture of safety, and fixing more of the process problems that contribute to patient harm.

Geotechnical approach for occupational safety risk analysis of critical slope in open pit mining as implication for earthquake hazard

NASA Astrophysics Data System (ADS)

Munirwansyah; Irsyam, Masyhur; Munirwan, Reza P.; Yunita, Halida; Zulfan Usrina, M.

2018-05-01

Occupational safety and health (OSH) is a planned effort to prevent accidents and diseases caused by work. In conducting mining activities often occur work accidents caused by unsafe field conditions. In open mine area, there is often a slump due to unstable slopes, which can disrupt the activities and productivity of mining companies. Based on research on stability of open pit slopes conducted by Febrianti [8], the Meureubo coal mine located in Aceh Barat district, on the slope of mine was indicated unsafe slope conditions, it will be continued research on OSH for landslide which is to understand the stability of the excavation slope and the shape of the slope collapse. Plaxis software was used for this research. After analyzing the slope stability and the effect of landslide on OSH with Job Safety Analysis (JSA) method, to identify the hazard to work safety, risk management analysis will be conducted to classified hazard level and its handling technique. This research aim is to know the level of risk of work accident at the company and its prevention effort. The result of risk analysis research is very high-risk value that is > 350 then the activity must be stopped until the risk can be reduced to reach the risk value limit < 20 which is allowed or accepted.

High-Explosives Applications Facility (HEAF)

NASA Astrophysics Data System (ADS)

Morse, J. L.; Weingart, R. C.

1989-03-01

This Safety Analysis Report (SAR) reviews the safety and environmental aspects of the High Explosives Applications Facility (HEAF). Topics covered include the site selected for the HEAF, safety design criteria, operations planned within the facility, and the safety and environmental analyses performed on this project to date. Provided in the Summary section is a review of hazards and the analyses, conclusions, and operating limits developed in this SAR. Appendices provide supporting documents relating to this SAR. This SAR is required by the LLNL Health and Safety Manual and DOE Order 5481.1B(2) to document the safety analysis efforts. The SAR was assembled by the Hazards Control Department, B-Division, and HEAF project personnel. This document was reviewed by B Division, the Chemistry Department, the Hazards Control Department, the Laboratory Associate Director for Administration and Operations, and the Associate Directors ultimately responsible for HEAF operations.

Integrated Safety Analysis Tiers

NASA Technical Reports Server (NTRS)

Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

2009-01-01

Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

2017 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2017-08-01

The use of safety belts and child safety seats is a proven means of reducing injuries to motor vehicle occupants involved in traffic crashes. There have been various methods used in efforts to increase safety belt and safety seat usage. Past efforts ...

2016 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2016-08-01

The use of safety belts and child safety seats is a proven means of reducing injuries to motor vehicle occupants involved in traffic crashes. There have been various methods used in efforts to increase safety belt and safety seat usage. Past efforts ...

L-Band Digital Aeronautical Communications System Engineering - Initial Safety and Security Risk Assessment and Mitigation

NASA Technical Reports Server (NTRS)

Zelkin, Natalie; Henriksen, Stephen

2011-01-01

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents a preliminary safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the L-band communication system after the technology is chosen and system rollout timing is determined. The security risk analysis resulted in identifying main security threats to the proposed system as well as noting additional threats recommended for a future security analysis conducted at a later stage in the system development process. The document discusses various security controls, including those suggested in the COCR Version 2.0.

A streamlined failure mode and effects analysis.

PubMed

Ford, Eric C; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg

2014-06-01

Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes had RPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.

Safety culture assessment in petrochemical industry: a comparative study of two algerian plants.

PubMed

Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

2014-06-01

To elucidate the relationship between safety culture maturity and safety performance of a particular company. To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

Safety Culture Assessment in Petrochemical Industry: A Comparative Study of Two Algerian Plants

PubMed Central

Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

2014-01-01

Background To elucidate the relationship between safety culture maturity and safety performance of a particular company. Methods To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. Results The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. Conclusion The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance. PMID:25180135

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

2015-07-01

The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less

Safety Issues with Hydrogen as a Vehicle Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, Lee Charles; Herring, James Stephen

1999-10-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less

Safety Issues with Hydrogen as a Vehicle Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. C. Cadwallader; J. S. Herring

1999-09-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less

Psychosocial influences on safety climate: evidence from community pharmacies.

PubMed

Phipps, Denham L; Ashcroft, Darren M

2011-12-01

To examine the relationship between psychosocial job characteristics and safety climate. Cross-sectional survey. Community pharmacies in Great Britain. Participants A random sample of community pharmacists registered in Great Britain (n = 860). Survey instruments Effort-reward imbalance (ERI) indicator and Job Content Questionnaire (JCQ). Main outcome measures Pharmacy Safety Climate Questionnaire (PSCQ). The profile of scores from the ERI indicated a relatively high risk of adverse psychological effects. The profile of scores from the JCQ indicated both high demand on pharmacists and a high level of psychological and social resources to meet these demands. Path analysis confirmed a model in which the ERI and JCQ measures, as well as the type of pharmacy and pharmacist role, predicted responses to the PSCQ (χ(2)(36) = 111.38, p < 0.001; Tucker-Lewis index = 0.96; comparative fit index = 0.98; root mean square error of approximation=0.05). Two general factors (effort vs reward and control vs demand) accounted for the effect of job characteristics on safety climate ratings; each had differential effects on the PSCQ scales. The safety climate in community pharmacies is influenced by perceptions of job characteristics, such as the level of job demands and the resources available to meet these demands. Hence, any efforts to improve safety should take into consideration the effect of the psychosocial work environment on safety climate. In addition, there is a need to address the presence of work-related stressors, which have the potential to cause direct or indirect harm to staff and service users. The findings of the current study provide a basis for future research to improve the safety climate and well-being, both in the pharmacy profession and in other healthcare settings.

Vision Zero--a road safety policy innovation.

PubMed

Belin, Matts-Åke; Tillgren, Per; Vedung, Evert

2012-01-01

The aim of this paper is to examine Sweden's Vision Zero road safety policy. In particular, the paper focuses on how safety issues were framed, which decisions were made, and what are the distinctive features of Vision Zero. The analysis reveals that the decision by the Swedish Parliament to adopt Vision Zero as Sweden's road safety policy was a radical innovation. The policy is different in kind from traditional traffic safety policy with regard to problem formulation, its view on responsibility, its requirements for the safety of road users, and the ultimate objective of road safety work. The paper briefly examines the implications of these findings for national and global road safety efforts that aspire to achieving innovative road safety policies in line with the Decade of Action for Road Safety 2011-2020, declared by the United Nations General Assembly in March 2010.

Analysis of VASCAR

DOT National Transportation Integrated Search

1991-05-01

This study is part of an effort by the National Highway Traffic Safety : Administration (NHTSA) to determine the accuracy of the VASCAR-plus speed measurement device. VASCAR-plus is used extensively for speed law enforcement by state and local police...

Calculation of Hazard Category 2/3 Threshold Quantities Using Contemporary Dosimetric Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, William C.

The purpose of this report is to describe the methodology and selection of input data utilized to calculate updated Hazard Category 2 and Hazard Category 3 Threshold Quantities (TQs) using contemporary dosimetric information. The calculation of the updated TQs will be considered for use in the revision to the Department of Energy (DOE) Technical Standard (STD-) 1027-92 Change Notice (CN)-1, “Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports.” The updated TQs documented in this report complement an effort previously undertaken by the National Nuclear Security Administration (NNSA), which in 2014 issued revisedmore » Supplemental Guidance documenting the calculation of updated TQs for approximately 100 radionuclides listed in DOE-STD-1027-92, CN-1. The calculations documented in this report complement the NNSA effort by expanding the set of radionuclides to more than 1,250 radionuclides with a published TQ. The development of this report was sponsored by the Department of Energy’s Office of Nuclear Safety (AU-30) within the Associate Under Secretary for Environment, Health, Safety, and Security organization.« less

Integrating patient and worker safety policies.

PubMed

Ormsby, Jason Derek

2013-01-01

Within the United States a number of federal and state legislative efforts, federal agency regulatory initiatives, and public/private policy efforts have attempted to improve patient safety or health care worker safety, but these initiatives have typically not been linked, in either conceptual development or implementation. Recently, policymakers and stakeholders have acknowledged that the two areas are inherently connected and that efforts to improve safety for frontline health care workers have not been adequately coordinated with initiatives addressing patient safety. Experts at prominent organizations recommend that subsequent discussions involve the integration of patient and worker safety advocates and strategies. This article was commissioned to stimulate discussion at a recent workshop in which nationally recognized patient and worker safety advocates participated in an open forum with discussion focused on policies impacting the U.S. hospital sector, resulting in an overall assessment of efforts in both areas and recommendations to integrate future policy strategies.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the second volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of failure modes and effects analysis; accident analysis; operational safety requirements; quality assurance program; ES&H management program; environmental, safety, and health systems critical to safety; summary of waste-management program; environmental monitoring program; facility expansion, decontamination, and decommissioning; summary of emergency response plan; summary plan for employee training; summary plan for operating procedures; glossary; and appendices A and B.« less

Safety and Security Interface Technology Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

Safety and Security Interface Technology Initiative Mr. Kevin J. Carroll Dr. Robert Lowrie, Dr. Micheal Lehto BWXT Y12 NSC Oak Ridge, TN 37831 865-576-2289/865-241-2772 carrollkj@y12.doe.gov Work Objective. Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. “Supporting Excellence in Operations Through Safety Analysis,” (workshop theme)more » includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is “Safeguards/Security Integration with Safety.” This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis/Security Documentation Integration, Configuration Control, and development of a shared ‘tool box’ of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated implementation plan includes: (1) A recommended process for handling the documentation of the security and safety disciplines, including an appropriate change control process and participation by all stakeholders. (2) A means to package security systems with sufficient information to help expedite the flow of that system through the process. In addition, a means to share successes among sites, to include information and safety basis to the extent such information is transportable. (3) Identification of key security systems and associated essential security elements being installed and an arrangement for the sites installing these systems to host an appropriate team to review a specific system and determine what information is exportable. (4) Identification of the security systems’ essential elements and appropriate controls required for testing of these essential elements in the facility. (5) The ability to help refine and improve an agreed to control set at the manufacture stage.« less

Ultimate strength analysis of inland tank barges

DOT National Transportation Integrated Search

1997-06-16

In an effort to understand the cause of recent catastrophic failures of inland tank barges and reduce the possibility of future casualties, the Coast Guard Marine Safety Center (MSC) studied the buckling" phenomenon. In conclusion, inland tank barges...

A streamlined failure mode and effects analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, Eric C., E-mail: eford@uw.edu; Smith, Koren; Terezakis, Stephanie

Purpose: Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. Methods: FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and usedmore » to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Results: Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes hadRPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Conclusions: Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.« less

Preliminary Evaluation of an Aviation Safety Thesaurus' Utility for Enhancing Automated Processing of Incident Reports

NASA Technical Reports Server (NTRS)

Barrientos, Francesca; Castle, Joseph; McIntosh, Dawn; Srivastava, Ashok

2007-01-01

This document presents a preliminary evaluation the utility of the FAA Safety Analytics Thesaurus (SAT) utility in enhancing automated document processing applications under development at NASA Ames Research Center (ARC). Current development efforts at ARC are described, including overviews of the statistical machine learning techniques that have been investigated. An analysis of opportunities for applying thesaurus knowledge to improving algorithm performance is then presented.

Measuring the wildland firefighting safety culture change - an analysis of entrapment rates from 1994 to 2013

Treesearch

Bob Loveless; Adam Hernandez

2015-01-01

The tragic fatality events of the mid-1990s and subsequent studies led to a concentrated effort to increase safety in the US federal wildland firefighter community beginning in 2000. Addressing human factors (HF) as a causal agent in accidents was a major focal point for this cultural change. To examine the effectiveness of this change, we hypothesized a decline in...

Beyond the cold hit: measuring the impact of the national DNA data bank on public safety at the city and county level.

PubMed

Gabriel, Matthew; Boland, Cherisse; Holt, Cydne

2010-01-01

Over the past decade, the Combined DNA Index System (CODIS) has increased solvability of violent crimes by linking evidence DNA profiles to known offenders. At present, an in-depth analysis of the United States National DNA Data Bank effort has not assessed the success of this national public safety endeavor. Critics of this effort often focus on laboratory and police investigators unable to provide timely investigative support as a root cause(s) of CODIS' failure to increase public safety. By studying a group of nearly 200 DNA cold hits obtained in SFPD criminal investigations from 2001-2006, three key performance metrics (Significance of Cold Hits, Case Progression & Judicial Resolution, and Potential Reduction of Future Criminal Activity) provide a proper context in which to define the impact of CODIS at the City and County level. Further, the analysis of a recidivist group of cold hit offenders and their past interaction with law enforcement established five noteworthy criminal case resolution trends; these trends signify challenges to CODIS in achieving meaningful case resolutions. CODIS' effectiveness and critical activities to support case resolutions are the responsibility of all criminal justice partners in order to achieve long-lasting public safety within the United States.

Exploring the role of emotional intelligence in behavior-based safety coaching.

PubMed

Wiegand, Douglas M

2007-01-01

Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.

Visit from JAXA to NASA MSFC: The Engines Element & Ideas for Collaboration

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

System Design, Development, and Fabrication: Design, develop, and fabricate or procure MB-60 component hardware compliant with the imposed technical requirements and in sufficient quantities to fulfill the overall MB-60 development effort. System Development, Assembly, and Test: Manage the scope of the development, assembly, and test-related activities for MB-60 development. This scope includes engine-level development planning, engine assembly and disassembly, test planning, engine testing, inspection, anomaly resolution, and development of necessary ground support equipment and special test equipment. System Integration: Provide coordinated integration in the realms of engineering, safety, quality, and manufacturing disciplines across the scope of the MB-60 design and associated products development Safety and Mission Assurance, structural design, fracture control, materials and processes, thermal analysis. Systems Engineering and Analysis: Manage and perform Systems Engineering and Analysis to provide rigor and structure to the overall design and development effort for the MB-60. Milestone reviews, requirements management, system analysis, program management support Program Management: Manage, plan, and coordinate the activities across all portions of the MB-60 work scope by providing direction for program administration, business management, and supplier management.

Station Blackout: A case study in the interaction of mechanistic and probabilistic safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli; Cristian Rabiti

2013-11-01

The ability to better characterize and quantify safety margins is important to improved decision making about nuclear power plant design, operation, and plant life extension. As research and development (R&D) in the light-water reactor (LWR) Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway R&D is to support plant decisions for risk-informed margin management with the aim tomore » improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario.« less

Demonstration of a Safety Analysis on a Complex System

NASA Technical Reports Server (NTRS)

Leveson, Nancy; Alfaro, Liliana; Alvarado, Christine; Brown, Molly; Hunt, Earl B.; Jaffe, Matt; Joslyn, Susan; Pinnell, Denise; Reese, Jon; Samarziya, Jeffrey;

Navigating towards improved surgical safety using aviation-based strategies.

PubMed

Kao, Lillian S; Thomas, Eric J

2008-04-01

Safety practices in the aviation industry are being increasingly adapted to healthcare in an effort to reduce medical errors and patient harm. However, caution should be applied in embracing these practices because of limited experience in surgical disciplines, lack of rigorous research linking these practices to outcome, and fundamental differences between the two industries. Surgeons should have an in-depth understanding of the principles and data supporting aviation-based safety strategies before routinely adopting them. This paper serves as a review of strategies adapted to improve surgical safety, including the following: implementation of crew resource management in training operative teams; incorporation of simulation in training of technical and nontechnical skills; and analysis of contributory factors to errors using surveys, behavioral marker systems, human factors analysis, and incident reporting. Avenues and challenges for future research are also discussed.

Clinical safety and professional liability claims in Ophthalmology.

PubMed

Dolz-Güerri, F; Gómez-Durán, E L; Martínez-Palmer, A; Castilla Céspedes, M; Arimany-Manso, J

2017-11-01

Patient safety is an international public health priority. Ophthalmology scientific societies and organisations have intensified their efforts in this field. As a tool to learn from errors, these efforts have been linked to the management of medical professional liability insurance through the analysis of claims. A review is performed on the improvements in patient safety, as well as professional liability issues in Ophthalmology. There is a high frequency of claims and risk of economic reparation of damage in the event of a claim in Ophthalmology. Special complaints, such as wrong surgery or lack of information, have a high risk of financial compensation and need strong efforts to prevent these potentially avoidable events. Studies focused on pathologies or specific procedures provide information of special interest to sub-specialists. The specialist in Ophthalmology, like any other doctor, is subject to the current legal provisions and appropriate mandatory training in the medical-legal aspects of health care is essential. Professionals must be aware of the fundamental aspects of medical professional liability, as well as specific aspects, such as defensive medicine and clinical safety. The understanding of these medical-legal aspects in the routine clinical practice can help to pave the way towards a satisfactory and safe professional career, and help in increasing patient safety. The aim of this review is to contribute to this training, for the benefit of professionals and patients. Copyright © 2017 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

Human Factors Research in Anesthesia Patient Safety

PubMed Central

Weinger, Matthew B.; Slagle, Jason

2002-01-01

Patient safety has become a major public concern. Human factors research in other high-risk fields has demonstrated how rigorous study of factors that affect job performance can lead to improved outcome and reduced errors after evidence-based redesign of tasks or systems. These techniques have increasingly been applied to the anesthesia work environment. This paper describes data obtained recently using task analysis and workload assessment during actual patient care and the use of cognitive task analysis to study clinical decision making. A novel concept of “non-routine events” is introduced and pilot data are presented. The results support the assertion that human factors research can make important contributions to patient safety. Information technologies play a key role in these efforts.

Human factors research in anesthesia patient safety.

PubMed Central

Weinger, M. B.; Slagle, J.

2001-01-01

Patient safety has become a major public concern. Human factors research in other high-risk fields has demonstrated how rigorous study of factors that affect job performance can lead to improved outcome and reduced errors after evidence-based redesign of tasks or systems. These techniques have increasingly been applied to the anesthesia work environment. This paper describes data obtained recently using task analysis and workload assessment during actual patient care and the use of cognitive task analysis to study clinical decision making. A novel concept of "non-routine events" is introduced and pilot data are presented. The results support the assertion that human factors research can make important contributions to patient safety. Information technologies play a key role in these efforts. PMID:11825287

25 CFR 170.145 - Are other funds available for a tribe's highway safety efforts?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Are other funds available for a tribe's highway safety... WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.145 Are other funds available for a tribe's highway safety efforts? Yes. Tribes...

25 CFR 170.145 - Are other funds available for a tribe's highway safety efforts?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Are other funds available for a tribe's highway safety... WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.145 Are other funds available for a tribe's highway safety efforts? Yes. Tribes...

25 CFR 170.145 - Are other funds available for a tribe's highway safety efforts?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Are other funds available for a tribe's highway safety... WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.145 Are other funds available for a tribe's highway safety efforts? Yes. Tribes...

25 CFR 170.145 - Are other funds available for a tribe's highway safety efforts?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Are other funds available for a tribe's highway safety... WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.145 Are other funds available for a tribe's highway safety efforts? Yes. Tribes...

25 CFR 170.145 - Are other funds available for a tribe's highway safety efforts?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Are other funds available for a tribe's highway safety... WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.145 Are other funds available for a tribe's highway safety efforts? Yes. Tribes...

Bisphosphonates and Nonhealing Femoral Fractures: Analysis of the FDA Adverse Event Reporting System (FAERS) and International Safety Efforts

PubMed Central

Edwards, Beatrice J.; Bunta, Andrew D.; Lane, Joseph; Odvina, Clarita; Rao, D. Sudhaker; Raisch, Dennis W.; McKoy, June M.; Omar, Imran; Belknap, Steven M.; Garg, Vishvas; Hahr, Allison J.; Samaras, Athena T.; Fisher, Matthew J.; West, Dennis P.; Langman, Craig B.; Stern, Paula H.

2013-01-01

Background: In the United States, hip fracture rates have declined by 30% coincident with bisphosphonate use. However, bisphosphonates are associated with sporadic cases of atypical femoral fracture. Atypical femoral fractures are usually atraumatic, may be bilateral, are occasionally preceded by prodromal thigh pain, and may have delayed fracture-healing. This study assessed the occurrence of bisphosphonate-associated nonhealing femoral fractures through a review of data from the U.S. FDA (Food and Drug Administration) Adverse Event Reporting System (FAERS) (1996 to 2011), published case reports, and international safety efforts. Methods: We analyzed the FAERS database with use of the proportional reporting ratio (PRR) and empiric Bayesian geometric mean (EBGM) techniques to assess whether a safety signal existed. Additionally, we conducted a systematic literature review (1990 to February 2012). Results: The analysis of the FAERS database indicated a PRR of 4.51 (95% confidence interval [CI], 3.44 to 5.92) for bisphosphonate use and nonhealing femoral fractures. Most cases (n = 317) were attributed to use of alendronate (PRR = 3.32; 95% CI, 2.71 to 4.17). In 2008, international safety agencies issued warnings and required label changes. In 2010, the FDA issued a safety notification, and the American Society for Bone and Mineral Research (ASBMR) issued recommendations about bisphosphonate-associated atypical femoral fractures. Conclusions: Nonhealing femoral fractures are unusual adverse drug reactions associated with bisphosphonate use, as up to 26% of published cases of atypical femoral fractures exhibited delayed healing or nonhealing. PMID:23426763

Safety training priorities

NASA Astrophysics Data System (ADS)

Thompson, N. A.; Ruck, H. W.

1984-04-01

The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.

Preventing Harm in the ICU-Building a Culture of Safety and Engaging Patients and Families.

PubMed

Thornton, Kevin C; Schwarz, Jennifer J; Gross, A Kendall; Anderson, Wendy G; Liu, Kathleen D; Romig, Mark C; Schell-Chaple, Hildy; Pronovost, Peter J; Sapirstein, Adam; Gropper, Michael A; Lipshutz, Angela K M

2017-09-01

Preventing harm remains a persistent challenge in the ICU despite evidence-based practices known to reduce the prevalence of adverse events. This review seeks to describe the critical role of safety culture and patient and family engagement in successful quality improvement initiatives in the ICU. We review the evidence supporting the impact of safety culture and provide practical guidance for those wishing to implement initiatives aimed at improving safety culture and more effectively integrate patients and families in such efforts. Literature review using PubMed including evaluation of key studies assessing large-scale quality improvement efforts in the ICU, impact of safety culture on patient outcomes, methodologies for quality improvement commonly used in healthcare, and patient and family engagement. Print and web-based resources from leading patient safety organizations were also searched. Our group completed a review of original studies, review articles, book chapters, and recommendations from leading patient safety organizations. Our group determined by consensus which resources would best inform this review. A strong safety culture is associated with reduced adverse events, lower mortality rates, and lower costs. Quality improvement efforts have been shown to be more effective and sustainable when paired with a strong safety culture. Different methodologies exist for quality improvement in the ICU; a thoughtful approach to implementation that engages frontline providers and administrative leadership is essential for success. Efforts to substantively include patients and families in the processes of quality improvement work in the ICU should be expanded. Efforts to establish a culture of safety and meaningfully engage patients and families should form the foundation for all safety interventions in the ICU. This review describes an approach that integrates components of several proven quality improvement methodologies to enhance safety culture in the ICU and highlights opportunities to include patients and families.

Tank car accident data analysis

DOT National Transportation Integrated Search

1991-06-01

This report presents the results of a study of accidents involving railroad tank cars. The study is part of an overall effort to provide improved safety of rail transportation at reduced life-cycle costs. A major goal of the study is to provide a tec...

Discounting the value of safety: effects of perceived risk and effort.

PubMed

Sigurdsson, Sigurdur O; Taylor, Matthew A; Wirth, Oliver

2013-09-01

Although falls from heights remain the most prevalent cause of fatalities in the construction industry, factors impacting safety-related choices associated with work at heights are not completely understood. Better tools are needed to identify and study the factors influencing safety-related choices and decision making. Using a computer-based task within a behavioral economics paradigm, college students were presented a choice between two hypothetical scenarios that differed in working height and effort associated with retrieving and donning a safety harness. Participants were instructed to choose the scenario in which they were more likely to wear the safety harness. Based on choice patterns, switch points were identified, indicating when the perceived risk in both scenarios was equivalent. Switch points were a systematic function of working height and effort, and the quantified relation between perceived risk and effort was described well by a hyperbolic equation. Choice patterns revealed that the perceived risk of working at heights decreased as the effort to retrieve and don a safety harness increased. Results contribute to the development of computer-based procedure for assessing risk discounting within a behavioral economics framework. Such a procedure can be used as a research tool to study factors that influence safety-related decision making with a goal of informing more effective prevention and intervention strategies. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Safety planning in focus groups of Malawian women living with HIV: helping each other deal with violence and abuse.

PubMed

Mkandawire-Valhmu, Lucy; Stevens, Patricia E; Kako, Peninnah M; Dressel, Anne

2013-11-01

In this critical ethnography, 72 HIV-infected women in Southern Malawi participated in 12 focus groups discussing the impact of HIV and violence. Our analysis, informed by a postcolonial feminist perspective, revealed women's capacity to collectively engage in safety planning. We present our findings about women's experiences based on narratives detailing how women collectively strategized safety planning efforts to mitigate the impact of violence. This study helps to fill a gap in the literature on the intersection between HIV and violence in women's lives. Strategies discussed by the women could form a basis for safety planning interventions for women in similar circumstances.

Exploiting Science: Enhancing the Safety Training of Pilots to Reduce the Risk of Bird Strikes

NASA Astrophysics Data System (ADS)

Mendonca, Flavio A. C.

Analysis of bird strikes to aviation in the U.S. from 1990 to 2015 indicate that the successful mitigation efforts at airports, which must be sustained, have reduced incidents with damage and a negative effect-on-flight since 2000. However, such efforts have done little to reduce strikes outside the airport jurisdiction, such as occurred with US Airways Flight 1549 in 2009. There are basically three strategies to mitigate the risk of bird strikes: standards set by aviation authorities, technology, and actions by crewmembers. Pilots play an important role as stakeholders in the prevention of bird strikes, especially outside the airport environment. Thus, safety efforts require enhanced risk management and aeronautical decision-making training for flight crews. The purpose of this study was to determine if a safety training protocol could effectively enhance CFR Part 141 general aviation pilots' knowledge and skills to reduce the risk of bird strikes to aviation. Participants were recruited from the Purdue University professional flight program and from Purdue Aviation. The researcher of this study used a pretest posttest experimental design. Additionally, qualitative data were collected through open-ended questions in the pretest, posttest, and a follow-up survey questionnaire. The participants' pretest and posttest scores were analyzed using parametric and nonparametric tests. Results indicated a significant increase in the posttest scores of the experimental group. An investigation of qualitative data showed that the topic "safety management of bird hazards by pilots" is barely covered during the ground and flight training of pilots. Furthermore, qualitative data suggest a misperception of the safety culture tenets and a poor familiarity with the safety risk management process regarding bird hazards. Finally, the researcher presented recommendations for practice and future research.

A Concept Analysis of Systems Thinking.

PubMed

Stalter, Ann M; Phillips, Janet M; Ruggiero, Jeanne S; Scardaville, Debra L; Merriam, Deborah; Dolansky, Mary A; Goldschmidt, Karen A; Wiggs, Carol M; Winegardner, Sherri

2017-10-01

This concept analysis, written by the National Quality and Safety Education for Nurses (QSEN) RN-BSN Task Force, defines systems thinking in relation to healthcare delivery. A review of the literature was conducted using five databases with the keywords "systems thinking" as well as "nursing education," "nursing curriculum," "online," "capstone," "practicum," "RN-BSN/RN to BSN," "healthcare organizations," "hospitals," and "clinical agencies." Only articles that focused on systems thinking in health care were used. The authors identified defining attributes, antecedents, consequences, and empirical referents of systems thinking. Systems thinking was defined as a process applied to individuals, teams, and organizations to impact cause and effect where solutions to complex problems are accomplished through collaborative effort according to personal ability with respect to improving components and the greater whole. Four primary attributes characterized systems thinking: dynamic system, holistic perspective, pattern identification, and transformation. Using the platform provided in this concept analysis, interprofessional practice has the ability to embrace planned efforts to improve critically needed quality and safety initiatives across patients' lifespans and all healthcare settings. © 2016 Wiley Periodicals, Inc.

Report on SARS backfit evaluation, Catalytic, Inc. Solvent Refined Coal Pilot Plant, Wilsonville, Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

A site visit was made in company with the DOE-OPTA-EA Safety and Health Official for the purpose of providing that official with technical assistance in evaluating the validity of an earlier DOE-OPTA recommendation exempting this facility from the Safety and Analysis and Review backfit requirements of DOE Order 5481.1. A further purpose of the visit was to assess and evaluate the occupational safety and health program at this facility, as compared with the criteria and guidelines contained in ASFE Order 5481.1. Adequate documentation regarding compliance with codes, standards, and regulations were observed at this facility. There is in existence anmore » ongoing continuous safety analysis effort for both modifications or additions to this facility. Adequate environmental safeguards and plans and procedures were observed. The SARS backfit exemption is appropriate. The occupational safety and health program is in many ways a model for the scope of work and nature of hazards involved, and is consistent with ASFE guidelines and statutory requirements.« less

Accident analysis and control options in support of the sludge water system safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

HEY, B.E.

A hazards analysis was initiated for the SWS in July 2001 (SNF-8626, K Basin Sludge and Water System Preliminary Hazard Analysis) and updated in December 2001 (SNF-10020 Rev. 0, Hazard Evaluation for KE Sludge and Water System - Project A16) based on conceptual design information for the Sludge Retrieval System (SRS) and 60% design information for the cask and container. SNF-10020 was again revised in September 2002 to incorporate new hazards identified from final design information and from a What-if/Checklist evaluation of operational steps. The process hazards, controls, and qualitative consequence and frequency estimates taken from these efforts have beenmore » incorporated into Revision 5 of HNF-3960, K Basins Hazards Analysis. The hazards identification process documented in the above referenced reports utilized standard industrial safety techniques (AIChE 1992, Guidelines for Hazard Evaluation Procedures) to systematically guide several interdisciplinary teams through the system using a pre-established set of process parameters (e.g., flow, temperature, pressure) and guide words (e.g., high, low, more, less). The teams generally included representation from the U.S. Department of Energy (DOE), K Basins Nuclear Safety, T Plant Nuclear Safety, K Basin Industrial Safety, fire protection, project engineering, operations, and facility engineering.« less

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

Stakeholder Perceptions of Risk in Construction.

PubMed

Zhao, Dong; McCoy, Andrew P; Kleiner, Brian M; Mills, Thomas H; Lingard, Helen

2016-02-01

Safety management in construction is an integral effort and its success requires inputs from all stakeholders across design and construction phases. Effective risk mitigation relies on the concordance of all stakeholders' risk perceptions. Many researchers have noticed the discordance of risk perceptions among critical stakeholders in safe construction work, however few have provided quantifiable evidence describing them. In an effort to fill this perception gap, this research performs an experiment that investigates stakeholder perceptions of risk in construction. Data analysis confirms the existence of such discordance, and indicates a trend in risk likelihood estimation. With risk perceptions from low to high, the stakeholders are architects, contractors/safety professionals, and engineers. Including prior studies, results also suggest that designers have improved their knowledge in building construction safety, but compared to builders they present more difficultly in reaching a consensus of perception. Findings of this research are intended to be used by risk management and decision makers to reassess stakeholders' varying judgments when considering injury prevention and hazard assessment.

Stakeholder Perceptions of Risk in Construction

PubMed Central

Zhao, Dong; McCoy, Andrew P.; Kleiner, Brian M.; Mills, Thomas H.; Lingard, Helen

2015-01-01

Safety management in construction is an integral effort and its success requires inputs from all stakeholders across design and construction phases. Effective risk mitigation relies on the concordance of all stakeholders’ risk perceptions. Many researchers have noticed the discordance of risk perceptions among critical stakeholders in safe construction work, however few have provided quantifiable evidence describing them. In an effort to fill this perception gap, this research performs an experiment that investigates stakeholder perceptions of risk in construction. Data analysis confirms the existence of such discordance, and indicates a trend in risk likelihood estimation. With risk perceptions from low to high, the stakeholders are architects, contractors/safety professionals, and engineers. Including prior studies, results also suggest that designers have improved their knowledge in building construction safety, but compared to builders they present more difficultly in reaching a consensus of perception. Findings of this research are intended to be used by risk management and decision makers to reassess stakeholders’ varying judgments when considering injury prevention and hazard assessment. PMID:26441481

Work zone safety analysis and modeling: a state-of-the-art review.

PubMed

Yang, Hong; Ozbay, Kaan; Ozturk, Ozgur; Xie, Kun

2015-01-01

Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for work zone safety. To address this deficit, this article aims to provide a comprehensive review of the existing extensive research efforts focused on work zone crash-related analysis and modeling, in the hopes of providing researchers and practitioners with a complete overview. Relevant literature published in the last 5 decades was retrieved from the National Work Zone Crash Information Clearinghouse and the Transport Research International Documentation database and other public digital libraries and search engines. Both peer-reviewed publications and research reports were obtained. Each study was carefully reviewed, and those that focused on either work zone crash data analysis or work zone safety modeling were identified. The most relevant studies are specifically examined and discussed in the article. The identified studies were carefully synthesized to understand the state of knowledge on work zone safety. Agreement and inconsistency regarding the characteristics of the work zone crashes discussed in the descriptive studies were summarized. Progress and issues about the current practices on work zone crash frequency and severity modeling are also explored and discussed. The challenges facing work zone safety research are then presented. The synthesis of the literature suggests that the presence of a work zone is likely to increase the crash rate. Crashes are not uniformly distributed within work zones and rear-end crashes are the most prevalent type of crashes in work zones. There was no across-the-board agreement among numerous papers reviewed on the relationship between work zone crashes and other factors such as time, weather, victim severity, traffic control devices, and facility types. Moreover, both work zone crash frequency and severity models still rely on relatively simple modeling techniques and approaches. In addition, work zone data limitations have caused a number of challenges in analyzing and modeling work zone safety. Additional efforts on data collection, developing a systematic data analysis framework, and using more advanced modeling approaches are suggested as future research tasks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurt, Christopher J.; Freels, James D.; Hobbs, Randy W.

There has been a considerable effort over the previous few years to demonstrate and optimize the production of plutonium-238 ( 238Pu) at the High Flux Isotope Reactor (HFIR). This effort has involved resources from multiple divisions and facilities at the Oak Ridge National Laboratory (ORNL) to demonstrate the fabrication, irradiation, and chemical processing of targets containing neptunium-237 ( 237Np) dioxide (NpO 2)/aluminum (Al) cermet pellets. A critical preliminary step to irradiation at the HFIR is to demonstrate the safety of the target under irradiation via documented experiment safety analyses. The steady-state thermal safety analyses of the target are simulated inmore » a finite element model with the COMSOL Multiphysics code that determines, among other crucial parameters, the limiting maximum temperature in the target. Safety analysis efforts for this model discussed in the present report include: (1) initial modeling of single and reduced-length pellet capsules in order to generate an experimental knowledge base that incorporate initial non-linear contact heat transfer and fission gas equations, (2) modeling efforts for prototypical designs of partially loaded and fully loaded targets using limited available knowledge of fabrication and irradiation characteristics, and (3) the most recent and comprehensive modeling effort of a fully coupled thermo-mechanical approach over the entire fully loaded target domain incorporating burn-up dependent irradiation behavior and measured target and pellet properties, hereafter referred to as the production model. These models are used to conservatively determine several important steady-state parameters including target stresses and temperatures, the limiting condition of which is the maximum temperature with respect to the melting point. The single pellet model results provide a basis for the safety of the irradiations, followed by parametric analyses in the initial prototypical designs that were necessary due to the limiting fabrication and irradiation data available. The calculated parameters in the final production target model are the most accurate and comprehensive, while still conservative. Over 210 permutations in irradiation time and position were evaluated, and are supported by the most recent inputs and highest fidelity methodology. The results of these analyses show that the models presented in this report provide a robust and reliable basis for previous, current and future experiment safety analyses. In addition, they reveal an evolving knowledge of the steady-state behavior of the NpO 2/Al pellets under irradiation for a variety of target encapsulations and potential conditions.« less

"Taking the problem to the people": traffic safety from public relations to political theory, 1937-1954.

PubMed

Bernardin, Stève

2015-04-01

The slogan "taking the problem to the people" nicely summarizes U.S. traffic safety campaigns of the 1950s. It refers to the goal of awareness and self-discipline for drivers through education and law enforcement. A detailed analysis of the campaigns, however, shows a subtler objective of the motor interests that promoted it. They wanted to overcome political indifference through a civic mobilization of drivers as citizens, persuading drivers to lobby for traffic control. The analysis of their efforts leads us to question the role-or lack of role-of politicians in scientific and technological controversies.

The quality improvement attitude survey: Development and preliminary psychometric characteristics.

PubMed

Dunagan, Pamela B

2017-12-01

To report the development of a tool to measure nurse's attitudes about quality improvement in their practice setting and to examine preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Human factors such as nursing attitudes of complacency have been identified as root causes of sentinel events. Attitudes of nurses concerning use of Quality and Safety Education for nurse's competencies can be most challenging to teach and to change. No tool has been developed measuring attitudes of nurses concerning their role in quality improvement. A descriptive study design with preliminary psychometric evaluation was used to examine the preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Registered bedside clinical nurses comprised the sample for the study (n = 57). Quantitative data were analysed using descriptive statistics and Cronbach's alpha reliability. Total score and individual item statistics were evaluated. Two open-ended items were used to collect statements about nurses' feelings regarding their experience in quality improvement efforts. Strong support for the internal consistency reliability and face validity of the Quality Improvement Nursing Attitude Scale was found. Total scale scores were high indicating nurse participants valued Quality and Safety Education for Nurse competencies in practice. However, item-level statistics indicated nurses felt powerless when other nurses deviate from care standards. Additionally, the sample indicated they did not consistently report patient safety issues and did not have a feeling of value in efforts to improve care. Findings suggested organisational culture fosters nurses' reporting safety issues and feeling valued in efforts to improve care. Participants' narrative comments and item analysis revealed the need to generate new items for the Quality Improvement Nursing Attitude Scale focused on nurses' perception of their importance in quality and safety and their power to enact principles. The Quality Improvement Nursing Attitude Scale-Revised edition was designed to help in understanding nurses' attitudes and values. It can be used to further explore broad concepts of quality improvement efforts. © 2017 John Wiley & Sons Ltd.

Using human factors engineering to improve patient safety in the cardiovascular operating room.

PubMed

Gurses, Ayse P; Martinez, Elizabeth A; Bauer, Laura; Kim, George; Lubomski, Lisa H; Marsteller, Jill A; Pennathur, Priyadarshini R; Goeschel, Chris; Pronovost, Peter J; Thompson, David

2012-01-01

Despite significant medical advances, cardiac surgery remains a high risk procedure. Sub-optimal work system design characteristics can contribute to the risks associated with cardiac surgery. However, hazards due to work system characteristics have not been identified in the cardiovascular operating room (CVOR) in sufficient detail to guide improvement efforts. The purpose of this study was to identify and categorize hazards (anything that has the potential to cause a preventable adverse patient safety event) in the CVOR. An interdisciplinary research team used prospective hazard identification methods including direct observations, contextual inquiry, and photographing to collect data in 5 hospitals for a total 22 cardiac surgeries. We performed thematic analysis of the qualitative data guided by a work system model. 60 categories of hazards such as practice variations, high workload, non-compliance with evidence-based guidelines, not including clinicians' in medical device purchasing decisions were found. Results indicated that hazards are common in cardiac surgery and should be eliminated or mitigated to improve patient safety. To improve patient safety in the CVOR, efforts should focus on creating a culture of safety, increasing compliance with evidence based infection control practices, improving communication and teamwork, and designing better tools and technologies through partnership among all stakeholders.

Job characteristics and safety climate: the role of effort-reward and demand-control-support models.

PubMed

Phipps, Denham L; Malley, Christine; Ashcroft, Darren M

2012-07-01

While safety climate is widely recognized as a key influence on organizational safety, there remain questions about the nature of its antecedents. One potential influence on safety climate is job characteristics (that is, psychosocial features of the work environment). This study investigated the relationship between two job characteristics models--demand-control-support (Karasek & Theorell, 1990) and effort-reward imbalance (Siegrist, 1996)--and safety climate. A survey was conducted with a random sample of 860 British retail pharmacists, using the job contents questionnaire (JCQ), effort-reward imbalance indicator (ERI) and a measure of safety climate in pharmacies. Multivariate data analyses found that: (a) both models contributed to the prediction of safety climate ratings, with the demand-control-support model making the largest contribution; (b) there were some interactions between demand, control and support from the JCQ in the prediction of safety climate scores. The latter finding suggests the presence of "active learning" with respect to safety improvement in high demand, high control settings. The findings provide further insight into the ways in which job characteristics relate to safety, both individually and at an aggregated level.

Program level evaluation of ASAP diagnosis, referral and rehabilitation efforts. Volume 3, Analysis of ASAP rehabilitation countermeasures effectiveness

DOT National Transportation Integrated Search

1976-09-01

The present report describes the client flow through rehabilitation systems of the 35 NHTSA funded Alcohol Safety Action Projects (ASAPs) during the 1972-1974 period of project operations, summarizes project initiated analyses of treatment program ef...

Analysis of roadside safety devices for use on very high-speed roadways.

DOT National Transportation Integrated Search

2009-09-01

The Texas Department of Transportation (TxDOT) is embarking on a multi-decade effort to expand : the states transportation system. TxDOT has expressed an interest in using very high design speeds (above : 80 mph) for some of these facilities to pr...

Quality and safety in medical care: what does the future hold?

PubMed

Liang, Bryan A; Mackey, Tim

2011-11-01

The rapid changes in health care policy, embracing quality and safety mandates, have culminated in programs and initiatives under the Patient Protection and Affordable Care Act. To review the context of, and anticipated quality and patient safety mandates for, delivery systems, incentives under health care reform, and models for future accountability for outcomes of care. Assessment of the provisions of Patient Protection and Affordable Care Act, other reform efforts, and reform initiatives focusing on future quality and safety provisions for health care providers. Health care reform and other efforts focus on consumerism in the context of price. Quality and safety efforts will be structured using financial incentives, best-practices research, and new delivery models that focus on reaching benchmarks while reducing costs. In addition, patient experience will be a key component of reimbursement, and a move toward "retail" approaches directed at the individual patient may supplant traditional "wholesale" efforts at attracting employers. Quality and safety have always been of prime importance in medicine. However, in the future, under health care reform and associated initiatives, a shift in the paradigm of medicine will integrate quality and safety measurement with financial incentives and a new emphasis on consumerism.

Ares I-X Range Safety Simulation and Analysis IV and V

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Brewer, Joan D.; Dulski, Matt B.; Gimenez, Adrian; Barron, Kyle; Tarpley, Ashley F.; Craig, A. Scott; Beaty, Jim R.; Starr, Brett R.

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) product data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual (AFSPCMAN) 91-710. Some products included were a nominal ascent trajectory, ascent flight envelopes, and malfunction turn data. These products are used by the Air Force s 45th Space Wing (45SW) to ensure public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures the Ares I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for certain RS products. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

15 CFR 270.202 - Coordination with search and rescue efforts.

Code of Federal Regulations, 2013 CFR

2013-01-01

... SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.202 Coordination with search and... efforts being undertaken at the site of the building failure, including FEMA urban search and rescue teams...

15 CFR 270.202 - Coordination with search and rescue efforts.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.202 Coordination with search and... efforts being undertaken at the site of the building failure, including FEMA urban search and rescue teams...

15 CFR 270.202 - Coordination with search and rescue efforts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.202 Coordination with search and... efforts being undertaken at the site of the building failure, including FEMA urban search and rescue teams...

15 CFR 270.202 - Coordination with search and rescue efforts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.202 Coordination with search and... efforts being undertaken at the site of the building failure, including FEMA urban search and rescue teams...

15 CFR 270.202 - Coordination with search and rescue efforts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.202 Coordination with search and... efforts being undertaken at the site of the building failure, including FEMA urban search and rescue teams...

Risk Informed Margins Management as part of Risk Informed Safety Margin Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith

2014-06-01

The ability to better characterize and quantify safety margin is important to improved decision making about Light Water Reactor (LWR) design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plantmore » safety and performance will become known. To support decision making related to economics, readability, and safety, the Risk Informed Safety Margin Characterization (RISMC) Pathway provides methods and tools that enable mitigation options known as risk informed margins management (RIMM) strategies.« less

Photographic Data Extraction Feasibility and Pilot Study in Support of Roadside Safety and Roadway Departure Research

DOT National Transportation Integrated Search

2014-05-01

This work represents the first phase of an ongoing low-cost in-house effort to perform data analysis, optimize internal data gathering in an informed fashion, make data requests to organizations, and obtain needed information. The work also calls on ...

Intimate Partner Survivors' Help-Seeking and Protection Efforts: A Person-Oriented Analysis

ERIC Educational Resources Information Center

Nurius, Paula S.; Macy, Rebecca J.; Nwabuzor, Ijeoma; Holt, Victoria L.

2011-01-01

Domestic violence advocates and researchers advocate for a survivor-centered approach for assisting women experiencing intimate partner violence (IV), with individualized safety plans and services; yet little empirical work has been done to determine IV survivors' specific combinations of vulnerabilities and assets that might inform such an…

Controller and pilot error in airport operations : a review of previous research and analysis of safety data

DOT National Transportation Integrated Search

2001-01-01

The purpose of this study was to examine controller and pilot errors in airport operations to identify potential tower remedies. The : first part of the report contains a review of the literature of studies conducted of tower operationsand of efforts...

Three Reflections on Assessing Safety Training Needs: A Case Study

ERIC Educational Resources Information Center

Sleezer, Catherine M.; Kelsey, Kathleen D.; Wood, Thomas E.

2008-01-01

Needs assessment plays an important role in training and human performance improvement efforts, but the literature contains little research on this topic. This study extended previous research on the Performance Analysis for Training (PAT) model of needs assessment by examining its implementation to determine environmental and occupational health…

Exploring the state of health and safety management system performance measurement in mining organizations.

PubMed

Haas, Emily Joy; Yorio, Patrick

2016-03-01

Complex arguments continue to be articulated regarding the theoretical foundation of health and safety management system (HSMS) performance measurement. The culmination of these efforts has begun to enhance a collective understanding. Despite this enhanced theoretical understanding, however, there are still continuing debates and little consensus. The goal of the current research effort was to empirically explore common methods to HSMS performance measurement in mining organizations. The purpose was to determine if value and insight could be added into the ongoing approaches of the best ways to engage in health and safety performance measurement. Nine site-level health and safety management professionals were provided with 133 practices corresponding to 20 HSMS elements, each fitting into the plan, do, check, act phases common to most HSMS. Participants were asked to supply detailed information as to how they (1) assess the performance of each practice in their organization, or (2) would assess each practice if it were an identified strategic imperative. Qualitative content analysis indicated that the approximately 1200 responses provided could be described and categorized into interventions , organizational performance , and worker performance . A discussion of how these categories relate to existing indicator frameworks is provided. The analysis also revealed divergence in two important measurement issues; (1) quantitative vs qualitative measurement and reporting; and (2) the primary use of objective or subjective metrics. In lieu of these findings we ultimately recommend a balanced measurement and reporting approach within the three metric categories and conclude with suggestions for future research.

Exploring the state of health and safety management system performance measurement in mining organizations

PubMed Central

Haas, Emily Joy; Yorio, Patrick

2016-01-01

Complex arguments continue to be articulated regarding the theoretical foundation of health and safety management system (HSMS) performance measurement. The culmination of these efforts has begun to enhance a collective understanding. Despite this enhanced theoretical understanding, however, there are still continuing debates and little consensus. The goal of the current research effort was to empirically explore common methods to HSMS performance measurement in mining organizations. The purpose was to determine if value and insight could be added into the ongoing approaches of the best ways to engage in health and safety performance measurement. Nine site-level health and safety management professionals were provided with 133 practices corresponding to 20 HSMS elements, each fitting into the plan, do, check, act phases common to most HSMS. Participants were asked to supply detailed information as to how they (1) assess the performance of each practice in their organization, or (2) would assess each practice if it were an identified strategic imperative. Qualitative content analysis indicated that the approximately 1200 responses provided could be described and categorized into interventions, organizational performance, and worker performance. A discussion of how these categories relate to existing indicator frameworks is provided. The analysis also revealed divergence in two important measurement issues; (1) quantitative vs qualitative measurement and reporting; and (2) the primary use of objective or subjective metrics. In lieu of these findings we ultimately recommend a balanced measurement and reporting approach within the three metric categories and conclude with suggestions for future research. PMID:26823642

Positioning Continuing Education: Boundaries and Intersections between the Domains Continuing Education, Knowledge Translation, Patient Safety and Quality Improvement

ERIC Educational Resources Information Center

Kitto, Simon; Bell, Mary; Peller, Jennifer; Sargeant, Joan; Etchells, Edward; Reeves, Scott; Silver, Ivan

2013-01-01

Public and professional concern about health care quality, safety and efficiency is growing. Continuing education, knowledge translation, patient safety and quality improvement have made concerted efforts to address these issues. However, a coordinated and integrated effort across these domains is lacking. This article explores and discusses the…

Development of Large-Scale Spacecraft Fire Safety Experiments

NASA Technical Reports Server (NTRS)

Ruff, Gary A.; Urban, David; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Legros, Guillaume; Eigenbrod, Christian; Smirnov, Nickolay; Fujita, Osamu; Cowlard, Adam J.;

Are health care provider organizations ready to tackle diagnostic error? A survey of Leapfrog-participating hospitals.

PubMed

Newman-Toker, David E; Austin, J Matthew; Derk, Jordan; Danforth, Melissa; Graber, Mark L

2017-06-27

A 2015 National Academy of Medicine report on improving diagnosis in health care made recommendations for direct action by hospitals and health systems. Little is known about how health care provider organizations are addressing diagnostic safety/quality. This study is an anonymous online survey of safety professionals from US hospitals and health systems in July-August 2016. The survey was sent to those attending a Leapfrog Group webinar on misdiagnosis (n=188). The instrument was focused on knowledge, attitudes, and capability to address diagnostic errors at the institutional level. Overall, 61 (32%) responded, including community hospitals (42%), integrated health networks (25%), and academic centers (21%). Awareness was high, but commitment and capability were low (31% of leaders understand the problem; 28% have sufficient safety resources; and 25% have made diagnosis a top institutional safety priority). Ongoing efforts to improve diagnostic safety were sparse and mostly included root cause analysis and peer review feedback around diagnostic errors. The top three barriers to addressing diagnostic error were lack of awareness of the problem, lack of measures of diagnostic accuracy and error, and lack of feedback on diagnostic performance. The top two tools viewed as critically important for locally tackling the problem were routine feedback on diagnostic performance and culture change to emphasize diagnostic safety. Although hospitals and health systems appear to be aware of diagnostic errors as a major safety imperative, most organizations (even those that appear to be making a strong commitment to patient safety) are not yet doing much to improve diagnosis. Going forward, efforts to activate health care organizations will be essential to improving diagnostic safety.

Ares I-X Range Safety Simulation Verification and Analysis IV and V

NASA Technical Reports Server (NTRS)

Tarpley, Ashley; Beaty, James; Starr, Brett

2010-01-01

NASA s ARES I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) flight data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual 91-710. Some products included in the flight data package were a nominal ascent trajectory, ascent flight envelope trajectories, and malfunction turn trajectories. These data are used by the Air Force s 45th Space Wing (45SW) to ensure Eastern Range public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data in regards to public safety and mission success, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. Multiple NASA centers and contractor organizations were assigned specific products to IV&V. The data generation and IV&V work was coordinated through the Launch Constellation Range Safety Panel s Trajectory Working Group, which included members from the prime and IV&V organizations as well as the 45SW. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures ARES I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for an RS product. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

[Is an effort needed in order to replace the punitive culture for the sake of patient safety?].

PubMed

Gutiérrez Ubeda, S R

2016-01-01

Efforts to introduce a safety culture have flourished in a growing number of health care organisations. However, many of these organisational efforts have been incomplete with respect to the manner on how to address the resistance to change offered by the prevailing punitive culture of healthcare organisations. The present article is intended to increase the awareness on three reasons of why an effort is needed to change the punitive culture before introducing the patient safety culture. The first reason is that the culture needs to be investigated and understood. The second reason is that culture is a complex construct, deeply embedded in organisations and their contexts, and thus difficult to change. The third reason is that punitive culture is not compatible with some components of safety culture, thus without removing it there are great possibilities that it would continue to be active and dominant over safety culture. These reasons suggest that, unless planning and executing effective interventions towards replacing punitive culture with safety culture, there is the risk that punitive culture would still prevail. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Effectiveness of Direct Safety Regulations on Manufacturers and Users of Industrial Machines: Its Implications on Industrial Safety Policies in Republic of Korea.

PubMed

Choi, Gi Heung

2017-03-01

Despite considerable efforts made in recent years, the industrial accident rate and the fatality rate in the Republic of Korea are much higher than those in most developed countries in Europe and North America. Industrial safety policies and safety regulations are also known to be ineffective and inefficient in some cases. This study focuses on the quantitative evaluation of the effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, and safety inspection of industrial machines in the Republic of Korea. Implications on safety policies to restructure the industrial safety system associated with industrial machines are also explored. Analysis of causes in industrial accidents associated with industrial machines confirms that technical causes need to be resolved to reduce both the frequency and the severity of such industrial accidents. Statistical analysis also confirms that the indirect effects of safety device regulation on users are limited for a variety of reasons. Safety device regulation needs to be shifted to complement safety certification and self-declaration of conformity for more balanced direct regulations on manufacturers and users. An example of cost-benefit analysis on conveyor justifies such a transition. Industrial safety policies and regulations associated with industrial machines must be directed towards eliminating the sources of danger at the stage of danger creation, thereby securing the safe industrial machines. Safety inspection further secures the safety of workers at the stage of danger use. The overall balance between such safety regulations is achieved by proper distribution of industrial machines subject to such regulations and the intensity of each regulation. Rearrangement of industrial machines subject to safety certification and self-declaration of conformity to include more movable industrial machines and other industrial machines with a high level of danger is also suggested.

Ares I-X Range Safety Trajectory Analyses Overview and Independent Validation and Verification

NASA Technical Reports Server (NTRS)

Tarpley, Ashley F.; Starr, Brett R.; Tartabini, Paul V.; Craig, A. Scott; Merry, Carl M.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle

2011-01-01

All Flight Analysis data products were successfully generated and delivered to the 45SW in time to support the launch. The IV&V effort allowed data generators to work through issues early. Data consistency proved through the IV&V process provided confidence that the delivered data was of high quality. Flight plan approval was granted for the launch. The test flight was successful and had no safety related issues. The flight occurred within the predicted flight envelopes. Post flight reconstruction results verified the simulations accurately predicted the FTV trajectory.

Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

NASA Technical Reports Server (NTRS)

Diorio, Kimberly A.

2002-01-01

A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

Quantifying Safety Performance of Driveways on State Highways

DOT National Transportation Integrated Search

2012-08-01

This report documents a research effort to quantify the safety performance of driveways in the State of Oregon. In : particular, this research effort focuses on driveways located adjacent to principal arterial state highways with urban or : rural des...

Safety evaluation of curve warning speed signs.

DOT National Transportation Integrated Search

2011-06-01

This report presents a review of a research effort to evaluate the safety implications of advisory speeds at horizontal curve locations on Oregon rural two-lane highways. The primary goals of this research effort were to characterize driving operatio...

Role of trade unions in workplace health promotion.

PubMed

Johansson, Mauri; Partanen, Timo

2002-01-01

Since the 19th century, workers have organized in trade unions and parties to strengthen their efforts at improving workplace health and safety, job conditions, working hours, wages, job contracts, and social security. Cooperation between workers and their organizations and professionals has been instrumental in improving regulation and legislation affecting workers' health. The authors give examples of participatory research in occupational health in Denmark and Finland. The social context of workplace health promotion, particularly the role of unions and workers' safety representatives, is described in an international feasibility study. Health promotion is rife with fundamental political, socioeconomic, philosophical, ethical, gender- and ethnicity-related, psychological, and biological problems. Analysis of power and context is crucial, focusing on political systems nationally, regionally, and globally. The authors advocate defending and supporting workers and their trade unions and strengthening their influence on workplace health promotion. In the face of rapid capitalist globalization, unions represent a barricade in defense of workers' health and safety. Health promoters and related professionals are encouraged to support trade unions in their efforts to promote health for workers and other less privileged groups.

Final report of coordination and cooperation with the European Union on embankment failure analysis

USDA-ARS?s Scientific Manuscript database

There has been an emphasis in the European Union (EU) community on the investigation of extreme flood processes and the uncertainties related to these processes. Over a 3-year period, the EU and the U.S. dam safety community (1) coordinated their efforts and collected information needed to integrate...

Program Multi - A Multi-purpose Program for Computing and Graphing Roots and Values for Any Real Function -- Users/Programmers Manual

DOT National Transportation Integrated Search

1976-05-01

As part of its activity under the Rail Equipment Safety Project, computer programs for track/train dynamics analysis are being developed and modified. As part of this effort, derailment behavior of trains negotiating curves under buff or draft has be...

An Analysis of Whitewater Rafting Safety Data: Risk Management for Programme Organizers

ERIC Educational Resources Information Center

Hunter, I. Roy

2007-01-01

Many outdoor organizations integrate whitewater rafting into their programmes. Often this is accomplished by contracting with a whitewater outfitter. This paper analyses rafting accident data collected by the American Canoe Association in an effort to suggest ways in which programmes can better manage risk while contracting with outfitters for…

Improving operating room safety

PubMed Central

2009-01-01

Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety. PMID:19930577

VVER Reactor Safety in Eastern Europe and Former Soviet Union

NASA Astrophysics Data System (ADS)

Papadopoulou, Demetra

2012-02-01

VVER Soviet-designed reactors that operate in Eastern Europe and former Soviet republics have heightened international concern for years due to major safety deficiencies. The governments of countries with VVER reactors have invested millions of dollars toward improving the safety of their nuclear power plants. Most of these reactors will continue to operate for the foreseeable future since they provide urgently-needed electrical power. Given this situation, this paper assesses the radiological consequences of a major nuclear accident in Eastern Europe. The paper also chronicles the efforts launched by the international nuclear community to improve the safety of the reactors and notes the progress made so far through extensive collaborative efforts in Armenia, Bulgaria, the Czech Republic, Hungary, Kazakhstan, Lithuania, Russia, Slovakia, and Ukraine to reduce the risks of nuclear accidents. Western scientific and technical staff collaborated with these countries to improve the safety of their reactor operations by strengthening the ability of the regulator to perform its oversight function, installing safety equipment and technologies, investing time in safety training, and working diligently to establish an enduring safety culture. Still, continued safety improvement efforts are necessary to ensure safe operating practices and achieve timely phase-out of older plants.

Safety behaviors and sleep effort predict sleep disturbance and fatigue in an outpatient sample with anxiety and depressive disorders.

PubMed

Fairholme, Christopher P; Manber, Rachel

2014-03-01

Theoretical and empirical support for the role of dysfunctional beliefs, safety behaviors, and increased sleep effort in the maintenance of insomnia has begun to accumulate. It is not yet known how these factors predict sleep disturbance and fatigue occurring in the context of anxiety and mood disorders. It was hypothesized that these three insomnia-specific cognitive-behavioral factors would be uniquely associated with insomnia and fatigue among patients with emotional disorders after adjusting for current symptoms of anxiety and depression and trait levels of neuroticism and extraversion. Outpatients with a current anxiety or mood disorder (N = 63) completed self-report measures including the Dysfunctional Beliefs About Sleep Scale (DBAS), Sleep-Related Safety Behaviors Questionnaire (SRBQ), Glasgow Sleep Effort Scale (GSES), Pittsburgh Sleep Quality Index (PSQI), NEO Five-Factor Inventory (FFI), and the 21-item Depression Anxiety and Stress Scale (DASS). Multivariate path analysis was used to evaluate study hypotheses. SRBQ (B = .60, p < .001, 95% CI [.34, .86]) and GSES (B = .31, p < .01, 95% CI [.07, .55]) were both significantly associated with PSQI. There was a significant interaction between SRBQ and DBAS (B = .25, p < .05, 95% CI [.04, .47]) such that the relationship between safety behaviors and fatigue was strongest among individuals with greater levels of dysfunctional beliefs. Findings are consistent with cognitive behavioral models of insomnia and suggest that sleep-specific factors might be important treatment targets among patients with anxiety and depressive disorders with disturbed sleep. Copyright © 2013 Elsevier Inc. All rights reserved.

Development of consistent hazard controls for DOE transuranic waste operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woody, W.J.

2007-07-01

This paper describes the results of a re-engineering initiative undertaken with the Department of Energy's (DOE) Office of Environmental Management (EM) in order to standardize hazard analysis assumptions and methods and resulting safety controls applied to multiple transuranic (TRU) waste operations located across the United States. A wide range of safety controls are historically applied to transuranic waste operations, in spite of the fact that these operations have similar operational characteristics and hazard/accident potential. The re-engineering effort supported the development of a DOE technical standard with specific safety controls designated for accidents postulated during waste container retrieval, staging/storage, venting, onsitemore » movements, and characterization activities. Controls cover preventive and mitigative measures; include both hardware and specific administrative controls; and provide protection to the facility worker, onsite co-located workers and the general public located outside of facility boundaries. The Standard development involved participation from all major DOE sites conducting TRU waste operations. Both safety analysts and operations personnel contributed to the re-engineering effort. Acknowledgment is given in particular to the following individuals who formed a core working group: Brenda Hawks, (DOE Oak Ridge Office), Patrice McEahern (CWI-Idaho), Jofu Mishima (Consultant), Louis Restrepo (Omicron), Jay Mullis (DOE-ORO), Mike Hitchler (WSMS), John Menna (WSMS), Jackie East (WSMS), Terry Foppe (CTAC), Carla Mewhinney (WIPP-SNL), Stephie Jennings (WIPP-LANL), Michael Mikolanis (DOESRS), Kraig Wendt (BBWI-Idaho), Lee Roberts (Fluor Hanford), and Jim Blankenhorn (WSRC). Additional acknowledgment is given to Dae Chung (EM) and Ines Triay (EM) for leadership and management of the re-engineering effort. (authors)« less

Evaluating safety and operations of high-speed signalized intersections.

DOT National Transportation Integrated Search

2010-03-01

This Final Report reviews a research effort to evaluate the safety and operations of high-speed intersections in the State of : Oregon. In particular, this research effort focuses on four-leg, signalized intersections with speed limits of 45 mph or :...

Evaluating safety and operation of high-speed intersections.

DOT National Transportation Integrated Search

2010-03-01

This Final Report reviews a research effort to evaluate the safety and operations of high-speed intersections in the State of : Oregon. In particular, this research effort focuses on four-leg, signalized intersections with speed limits of 45 mph or :...

Strengths, weaknesses, opportunities, and threats analysis of integrating the World Health Organization patient safety curriculum into undergraduate medical education in Pakistan: a qualitative case study.

PubMed

Misbah, Samreen; Mahboob, Usman

2017-01-01

The purpose of this study was to conduct a strengths, weaknesses, opportunities, and threats (SWOT) analysis of integrating the World Health Organization (WHO) patient safety curriculum into undergraduate medical education in Pakistan. A qualitative interpretive case study was conducted at Riphah International University, Islamabad, from October 2016 to June 2017. The study included 9 faculty members and 1 expert on patient safety. The interviews were audiotaped, and a thematic analysis of the transcripts was performed using NVivo software. Four themes were derived based on the need analysis model. The sub-themes derived from the collected data were arranged under the themes of strengths, weaknesses, opportunities, and threats, in accordance with the principles of SWOT analysis. The strengths identified were the need for a formal patient safety curriculum and its early integration into the undergraduate program. The weaknesses were faculty awareness and participation in development programs. The opportunities were an ongoing effort to develop an appropriate curriculum, to improve the current culture of healthcare, and to use the WHO curricular resource guide. The threats were attitudes towards patient safety in Pakistani culture, resistance to implementation from different levels, and the role of regulatory authorities. The theme of patient safety needs to be incorporated early into the formal medical education curriculum, with the main goals of striving to do no harm and seeing mistakes as opportunities to learn. Faculty development activities need to be organized, and faculty members should to be encouraged to participate in them. The lack of a patient safety culture was identified as the primary reason for resistance to this initiative at many levels. The WHO curriculum, amended according to local institutional culture, can be implemented appropriately with support from the corresponding regulatory bodies.

Safety-net providers in some US communities have increasingly embraced coordinated care models.

PubMed

Cunningham, Peter; Felland, Laurie; Stark, Lucy

2012-08-01

Safety-net organizations, which provide health services to uninsured and low-income people, increasingly are looking for ways to coordinate services among providers to improve access to and quality of care and to reduce costs. In this analysis, a part of the Community Tracking Study, we examined trends in safety-net coordination activities from 2000 to 2010 within twelve communities in the United States and found a notable increase in such activities. Six of the twelve communities had made formal efforts to link uninsured people to medical homes and coordinate care with specialists in 2010, compared to only two communities in 2000. We also identified key attributes of safety-net coordinated care systems, such as reliance on a medical home for meeting patients' primary care needs, and lingering challenges to safety-net integration, such as competition among hospitals and community health centers for Medicaid patients.

Lunar mission safety and rescue: Executive summary

NASA Technical Reports Server (NTRS)

1971-01-01

An executive summary is presented of the escape/rescue and the hazards analyses for manned missions and operations in the 1980 time frame. The method of approach, basic data generated, and significant results are outlined, and highlights of the two analyses are given. Areas in which research or technical development efforts could improve mission safety, and specific suggestions for additional effort studies on safety analyses are listed.

Influence Map Methodology for Evaluating Systemic Safety Issues

NASA Technical Reports Server (NTRS)

2008-01-01

"Raising the bar" in safety performance is a critical challenge for many organizations, including Kennedy Space Center. Contributing-factor taxonomies organize information about the reasons accidents occur and therefore are essential elements of accident investigations and safety reporting systems. Organizations must balance efforts to identify causes of specific accidents with efforts to evaluate systemic safety issues in order to become more proactive about improving safety. This project successfully addressed the following two problems: (1) methods and metrics to support the design of effective taxonomies are limited and (2) influence relationships among contributing factors are not explicitly modeled within a taxonomy.

Safety in the Workplace.

ERIC Educational Resources Information Center

Shaw, Richard

1999-01-01

Addresses workplace safety needs and tips for helping an organization achieve a high level of safety. Tips include showing administration commitment, establishing retribution-free reporting of safety problems and violations, rewarding excellent safety effort, and allowing no compromises in following safety procedures. (GR)

Fabrication and Testing of Ceramic Matrix Composite Rocket Propulsion Components

NASA Technical Reports Server (NTRS)

Effinger, M. R.; Clinton, R. C., Jr.; Dennis, J.; Elam, S.; Genge, G.; Eckel, A.; Jaskowiak, M. H.; Kiser, J. D.; Lang, J.

2001-01-01

NASA has established goals for Second and Third Generation Reusable Launch Vehicles. Emphasis has been placed on significantly improving safety and decreasing the cost of transporting payloads to orbit. Ceramic matrix composites (CMC) components are being developed by NASA to enable significant increases in safety and engineer performance, while reducing costs. The development of the following CMC components are being pursued by NASA: (1) Simplex CMC Blisk; (2) Cooled CMC Nozzle Ramps; (3) Cooled CMC Thrust Chambers; and (4) CMC Gas Generator. These development efforts are application oriented, but have a strong underpinning of fundamental understanding of processing-microstructure-property relationships relative to structural analyses, nondestructive characterization, and material behavior analysis at the coupon and component and system operation levels. As each effort matures, emphasis will be placed on optimizing and demonstrating material/component durability, ideally using a combined Building Block Approach and Build and Bust Approach.

Lessons regarding the safety of orthopaedic patient care: an analysis of four hundred and sixty-four closed malpractice claims.

PubMed

Matsen, Frederick A; Stephens, Linda; Jette, Jocelyn L; Warme, Winston J; Posner, Karen L

2013-02-20

An orthopaedic malpractice claim alleges that the patient sustained a preventable iatrogenic injury. The analysis of a representative series of malpractice claims provides a unique view of alleged orthopaedic adverse events, revealing what can potentially go wrong across a spectrum of practice settings and anatomic locations. The goal of this study was to identify high-impact targets in order to institute measures to reduce claims through efforts focused on patient safety. The authors investigated 464 consecutive closed malpractice claims from the nation's largest insurer of medical liability. We analyzed the claims by anatomical site, type of care rendered, type of allegation, and payment. We calculated an "impact factor" for each claim type by dividing the percentage of total payments for each type by the percentage of total claims for that type. Our analysis revealed major concerns regarding patient safety within this series of malpractice claims. One-third of the claims alleged permanent disabling injuries, including amputations, brain damage, and major nerve damage. The highest impact allegations were failure to protect structures in the surgical field (41% of total payments to plaintiffs, 15% of all claims, impact factor of 2.7) and failure to prevent, diagnose, and/or treat complications of treatment (16% of total payments, 7% of all claims, impact factor of 2.3). Spine procedures had high impact (1.9), representing 28% of dollars paid and 15% of claims, with 45% of spine claims involving death or severe permanent injury. Failure of implant positioning was commonly alleged in hip and knee arthroplasty. In claims related to fracture care, the most common allegations were related to malunions, nonunions, dislocations, failure to protect structures in the surgical field, infection, and treatment complications. Total payment for the eighty-eight claims paid was $17,917,614 (U.S. dollars adjusted to 2009). Regarding clinical relevance, this analysis suggests risk areas for targeted efforts to improve patient safety and reduce malpractice claims.

Associations between safety culture and employee engagement over time: a retrospective analysis.

PubMed

Daugherty Biddison, Elizabeth Lee; Paine, Lori; Murakami, Peter; Herzke, Carrie; Weaver, Sallie J

2016-01-01

With the growth of the patient safety movement and development of methods to measure workforce health and success have come multiple modes of assessing healthcare worker opinions and attitudes about work and the workplace. Safety culture, a group-level measure of patient safety-related norms and behaviours, has been proposed to influence a variety of patient safety outcomes. Employee engagement, conceptualised as a positive, work-related mindset including feelings of vigour, dedication and absorption in one's work, has also demonstrated an association with a number of important worker outcomes in healthcare. To date, the relationship between responses to these two commonly used measures has been poorly characterised. Our study used secondary data analysis to assess the relationship between safety culture and employee engagement over time in a sample of >50 inpatient hospital units in a large US academic health system. With >2000 respondents in each of three time periods assessed, we found moderate to strong positive correlations (r=0.43-0.69) between employee engagement and four Safety Attitudes Questionnaire domains. Independent collection of these two assessments may have limited our analysis in that minimally different inclusion criteria resulted in some differences in the total respondents to the two instruments. Our findings, nevertheless, suggest a key area in which healthcare quality improvement efforts might be streamlined. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Microbial food safety in Ghana: a meta-analysis.

PubMed

Saba, Courage K S; Gonzalez-Zorn, Bruno

2012-12-16

Food safety is a crucial factor in the growth of developing countries worldwide. In this study, we present a meta-analysis of microbiological food safety publications from Ghana. The search words "Ghana food safety", "Ghana food research", and "Ghana food bacteria" were used to search for microbiological food safety publications with related abstracts or titles in PubMed, published between 1997 and 2009. We obtained 183 research articles, from which we excluded articles concerning ready-to-eat microbial fermented foods and waterborne microorganisms as well as articles without abstracts. The criteria used for analysis of these publications were based on an assessment of methodological soundness previously developed for use in the medical field, with some modifications incorporated. The most predominant bacteria in Ghanain foods are Enterobacter spp., Citrobacter spp., Klebsiella spp. and Escherichia spp., which were found to be present in 65%, 50%, 46% and 38% respectively, of the food samples considered in the studies analysed. The most contaminated food samples were macaroni, salad, and milk. Although the methodological quality of the articles was generally sound, most of them did not give directions for future research. Several did not state possible reasons for differences between studies. The microbiological food contamination in Ghana is alarming. However, we found that the downward trend in publications of microbial food safety articles is appalling. Hence a concerted effort in research on food safety is needed in Ghana to help curb the incidence of preventable food-borne disease.

Using Computational Toxicology to Enable Risk-Based ...

EPA Pesticide Factsheets

presentation at Drug Safety Gordon Research Conference 2016 on research efforts in NCCT to enable Computational Toxicology to support risk assessment. Slide presentation at Drug Safety Gordon Research Conference 2016 on research efforts in NCCT to enable Computational Toxicology to support risk assessment.

Resources Available for Hazards Analysis of Aerospace Fluids

NASA Technical Reports Server (NTRS)

Woods, S. S.; Stewart, W. F.; Baker, D. L.

2001-01-01

In recent years, the legislative and executive branches of the federal government have pushed to make government more efficient and responsive to the needs of the marketplace. One of these initiatives, Public Law 104-113, also known as the National Technology Transfer and Advancement Act of 1995 (NTTAA), is designed to accelerate technology transfer to industry and promote government-industry partnership. Summarized, NTTAA states that '... all Federal agencies and departments shall use technical standards that are developed or adopted by voluntary consensus standards bodies, using such technical standards as a means to carry out policy objectives or activities determined by the agencies and departments. Government agencies must now determine if their in-house requirement-setting activities are sufficiently unique that no public interest is served by having them adopted by a voluntary consensus organization (VCO), or if not, to use or develop voluntary consensus standards. The Office of Management and Budget (OMB) is chartered by the law to monitor federal agency progress and report the results to Congress. In response to NTTAA, agency-wide oxygen and hydrogen safety standards sponsored by the NASA Headquarters (HQ) Office of Safety and Mission Assurance (OSMA) were obvious choices for early adoption by VCOs. In 1996, HQ sought assistance from the Johnson Space Center (JSC) White Sands Test Facility (WSTF), the technical lead for development of these safety standards, to evaluate their adoption by VCOs. At that time, WSTF-developed propellant hazards manuals were likewise identified for possible VCO adoption. Subsequently, WSTF was asked to represent NASA for development of an international ISO safety standard for hydrogen use. Concurrent with these WSTF standards activities are related efforts to develop and publish propellant hazards analysis protocols and safety courses for the industrial, propellant use of oxygen, hydrogen, and hypergols. This paper reports on these efforts and describes WSTF's overall voluntary consensus standards program to coordinate the interchange of NASA's propellant hazards and safety information with industry.

[Anaesthetic security: evolution of ideas].

PubMed

Cherif, Ali; Daghfous, Mounir; Saîdi, Yosri

2008-11-01

The concept of risk has not clear neither in the media nor in the medical field. It appears important to us to bring details relating some definitions in the field of anaesthesia safety. This work aims to clarify the concepts of safety, of risk in a medical activity like the Anaesthesia. A search was carried out on Medline with the following key words: Risk anaesthetic, anaesthetic Safety, anaesthetic mortality. The definitions of risk, of acceptable risk taking account of social and economic considerations are brought in this text. The ways to evaluate safety and the methods to achieve it was developed. The indicator of quality more used to evaluate safety is anaesthetic mortality. Many difficulties exist with the interpretation of data on mortality. The standards of care are normally established according to the degree of necessary safety. Concurrently to these standards exist certainly the human error which is a phenomenon towards which must direct all the efforts of improvement of safety but more especially the errors of system which are found regularly in the analysis of accidents and incident. The identification of the failures is the mandatory step to achieve safety.

A multilevel examination of affective job insecurity climate on safety outcomes.

PubMed

Jiang, Lixin; Probst, Tahira M

2016-07-01

Previous research has established a causal link between individual perceptions of job insecurity and safety outcomes. However, whether job insecurity climate is associated with safety outcomes has not been studied. The purpose of the current study was to explore the main and cross-level interaction effects of affective job insecurity climate on safety outcomes, including behavioral safety compliance, reporting attitudes, workplace injuries, experienced safety events, unreported safety events, and accident underreporting, beyond individual affective job insecurity. With 171 employees nested in 40 workgroups, multilevel analyses revealed that the negative impacts of individual affective job insecurity on safety outcomes are exacerbated when they occur in a climate of high affective job insecurity. These results are interpreted in light of safety management efforts and suggest that efforts to create a secure climate within one's workgroup may reap safety-related benefits. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Evaluating safety and operation of high-speed signalized intersections : final report, March 2010.

DOT National Transportation Integrated Search

2010-03-01

This Final Report reviews a research effort to evaluate the safety and operations of high-speed intersections in the State of : Oregon. In particular, this research effort focuses on four-leg, signalized intersections with speed limits of 45 mph or :...

Coupling the System Analysis Module with SAS4A/SASSYS-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanning, T. H.; Hu, R.

2016-09-30

SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format formore » PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly attributed to the limited maturity of the SAM development effort. The severe accident modeling capabilities in SAS4A/SASSYS-1 (sodium boiling, fuel melting and relocation) will continue to play a vital role for a long time. Therefore, the SAS4A/SASSYS-1 modernization effort should remain a high priority task under the ART program to ensure continued participation in domestic and international SFR safety collaborations and design optimizations. On the other hand, SAM provides an advanced system analysis tool, with improved numerical solution schemes, data management, code flexibility, and accuracy. SAM is still in early stages of development and will require continued support from NEAMS to fulfill its potential and to mature into a production tool for advanced reactor safety analysis. The effort to couple SAS4A/SASSYS-1 and SAM is the first step on the integration of these modeling capabilities.« less

Step voltage analysis for the catenoid lightning protection system

NASA Technical Reports Server (NTRS)

Chai, J. C.; Briet, R.; Barker, D. L.; Eley, H. E.

1991-01-01

The main objective of the proposed overhead Catenoid Lightning Protection System (CLPS) is personnel safety. To ensure working personnel's safety in lightning situations, it is necessary that the potential difference developed across a distance equal to a person's pace (step voltage) does not exceed a separately established safe voltage in order to avoid electrocution (ventricular fibrillation) of humans. Therefore, the first stage of the analytical effort is to calculate the open circuit step voltage. An impedance model is developed for this purpose. It takes into consideration the earth's complex impedance behavior and the transient nature of the lightning phenomenon. In the low frequency limit, this impedance model is shown to reduce to results similar to those predicted by the conventional resistor model in a DC analysis.

Anomaly Analysis: NASA's Engineering and Safety Center Checks Recurring Shuttle Glitches

NASA Technical Reports Server (NTRS)

Morring, Frank, Jr.

2004-01-01

The NASA Engineering and Safety Center (NESC), set up in the wake of the Columbia accident to backstop engineers in the space shuttle program, is reviewing hundreds of recurring anomalies that the program had determined don't affect flight safety to see if in fact they might. The NESC is expanding its support to other programs across the agency, as well. The effort, which will later extend to the International Space Station (ISS), is a principal part of the attempt to overcome the normalization of deviance--a situation in which organizations proceeded as if nothing was wrong in the face of evidence that something was wrong--cited by sociologist Diane Vaughn as contributing to both space shuttle disasters.

International Safety Regulation and Standards for Space Travel and Commerce

NASA Astrophysics Data System (ADS)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

Redirecting traditional professional values to support safety: changing organisational culture in health care.

PubMed

Carroll, J S; Quijada, M A

2004-12-01

Professionals in healthcare organisations who seek to enhance safety and quality in an increasingly demanding industry environment often identify culture as a barrier to change. The cultural focus on individual autonomy, for example, seems to conflict with desired norms of teamwork, problem reporting, and learning. We offer a definition and explication of why culture is important to change efforts. A cultural analysis of health care suggests professional values that can be redirected to support change. We offer examples of organisations that drew upon cultural strengths to create new ways of working and gradually shifted the culture.

Redirecting traditional professional values to support safety: changing organisational culture in health care

PubMed Central

Carroll, J; Quijada, M

2004-01-01

Professionals in healthcare organisations who seek to enhance safety and quality in an increasingly demanding industry environment often identify culture as a barrier to change. The cultural focus on individual autonomy, for example, seems to conflict with desired norms of teamwork, problem reporting, and learning. We offer a definition and explication of why culture is important to change efforts. A cultural analysis of health care suggests professional values that can be redirected to support change. We offer examples of organisations that drew upon cultural strengths to create new ways of working and gradually shifted the culture. PMID:15576686

A systems-based food safety evaluation: an experimental approach.

PubMed

Higgins, Charles L; Hartfield, Barry S

2004-11-01

Food establishments are complex systems with inputs, subsystems, underlying forces that affect the system, outputs, and feedback. Building on past exploration of the hazard analysis critical control point concept and Ludwig von Bertalanffy General Systems Theory, the National Park Service (NPS) is attempting to translate these ideas into a realistic field assessment of food service establishments and to use information gathered by these methods in efforts to improve food safety. Over the course of the last two years, an experimental systems-based methodology has been drafted, developed, and tested by the NPS Public Health Program. This methodology is described in this paper.

Night club patrons who feel safe will return: Evidence to encourage management to address club violence.

PubMed

Johnson, Mark B; Voas, Robert; Miller, Brenda A; Byrnes, Hilary; Bourdeau, Beth

2016-02-01

There is substantial evidence that heavy drinking is associated with aggression and violence. Most managers of drinking establishments are required to maintain a security staff to deal with disruptive patrons who threaten an organization's business or legal status. However, managers may focus little on minor instances of aggression even though these may escalate into more serious events. We hypothesize that proactive security efforts may positively affect patrons' perceptions of nighttime safety and influence their decisions to return to the club, thereby affecting the club's bottom line. Data for this study were collected from entry and exit surveys with 1714 attendees at 70 electronic music dance events at 10 clubs in the San Francisco Bay Area (2010-2012). Participants were asked to report on observations and experiences with aggressive behavior while in the club, their overall perception of club safety, and their plans to return to the same club in the next 30 days. Mediational multiple regression analysis was used to relate observations of club security to perceptions of personal safety and plans to return to the club. Reported observations of an active club security staff were positively related to perceptions of personal safety. Safety perceptions, in turn, were significantly related to plans to return to the club. The indirect path between perceptions of security and plans to return was significant as well. The results suggest that an active security presence inside clubs can encourage club attendance by providing an environment where minor altercations are minimized, contributing to the perception of club safety. Evidence that proactive security efforts appear to increase return customers might motivate managers to implement better security policies. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

2015 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2015-08-01

The use of safety belts and child safety seats has been shown to be an effective means of : reducing injuries to motor-vehicle occupants involved in traffic crashes. There have been various : methods used in efforts to increase safety belt and safety...

Airline Safety and Economy

NASA Technical Reports Server (NTRS)

1993-01-01

This video documents efforts at NASA Langley Research Center to improve safety and economy in aircraft. Featured are the cockpit weather information needs computer system, which relays real time weather information to the pilot, and efforts to improve techniques to detect structural flaws and corrosion, such as the thermal bond inspection system.

Navigating School Safety Law and Policy

ERIC Educational Resources Information Center

Vaillancourt, Kelly; Rossen, Eric

2012-01-01

Initiatives designed to improve school safety and conditions for learning have become central to education reform efforts at the local, state, and national levels. These efforts often target the reduction and prevention of bullying, discrimination, and harassment in schools. While most states currently have some form of law or policy designed to…

Walking the line: Understanding pedestrian behaviour and risk at rail level crossings with cognitive work analysis.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Stanton, Neville A

2016-03-01

Pedestrian fatalities at rail level crossings (RLXs) are a public safety concern for governments worldwide. There is little literature examining pedestrian behaviour at RLXs and no previous studies have adopted a formative approach to understanding behaviour in this context. In this article, cognitive work analysis is applied to understand the constraints that shape pedestrian behaviour at RLXs in Melbourne, Australia. The five phases of cognitive work analysis were developed using data gathered via document analysis, behavioural observation, walk-throughs and critical decision method interviews. The analysis demonstrates the complex nature of pedestrian decision making at RLXs and the findings are synthesised to provide a model illustrating the influences on pedestrian decision making in this context (i.e. time, effort and social pressures). Further, the CWA outputs are used to inform an analysis of the risks to safety associated with pedestrian behaviour at RLXs and the identification of potential interventions to reduce risk. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Element Load Data Processor (ELDAP) Users Manual

NASA Technical Reports Server (NTRS)

Ramsey, John K., Jr.; Ramsey, John K., Sr.

2015-01-01

Often, the shear and tensile forces and moments are extracted from finite element analyses to be used in off-line calculations for evaluating the integrity of structural connections involving bolts, rivets, and welds. Usually the maximum forces and moments are desired for use in the calculations. In situations where there are numerous structural connections of interest for numerous load cases, the effort in finding the true maximum force and/or moment combinations among all fasteners and welds and load cases becomes difficult. The Element Load Data Processor (ELDAP) software described herein makes this effort manageable. This software eliminates the possibility of overlooking the worst-case forces and moments that could result in erroneous positive margins of safety and/or selecting inconsistent combinations of forces and moments resulting in false negative margins of safety. In addition to forces and moments, any scalar quantity output in a PATRAN report file may be evaluated with this software. This software was originally written to fill an urgent need during the structural analysis of the Ares I-X Interstage segment. As such, this software was coded in a straightforward manner with no effort made to optimize or minimize code or to develop a graphical user interface.

Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Tarpley, Ashley F.; Craig, A. Scott; Tartabini, Paul V.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the process

Pharmacological mechanism-based drug safety assessment and prediction.

PubMed

Abernethy, D R; Woodcock, J; Lesko, L J

2011-06-01

Advances in cheminformatics, bioinformatics, and pharmacology in the context of biological systems are now at a point that these tools can be applied to mechanism-based drug safety assessment and prediction. The development of such predictive tools at the US Food and Drug Administration (FDA) will complement ongoing efforts in drug safety that are focused on spontaneous adverse event reporting and active surveillance to monitor drug safety. This effort will require the active collaboration of scientists in the pharmaceutical industry, academe, and the National Institutes of Health, as well as those at the FDA, to reach its full potential. Here, we describe the approaches and goals for the mechanism-based drug safety assessment and prediction program.

DARPA/USAF/USN J-UCAS X-45A System Demonstration Program: A Review of Flight Test Site Processes and Personnel

NASA Technical Reports Server (NTRS)

Cosentino, Gary B.

2008-01-01

The Joint Unmanned Combat Air Systems (J-UCAS) program is a collaborative effort between the Defense Advanced Research Project Agency (DARPA), the US Air Force (USAF) and the US Navy (USN). Together they have reviewed X-45A flight test site processes and personnel as part of a system demonstration program for the UCAV-ATD Flight Test Program. The goal was to provide a disciplined controlled process for system integration and testing and demonstration flight tests. NASA's Dryden Flight Research Center (DFRC) acted as the project manager during this effort and was tasked with the responsibilities of range and ground safety, the provision of flight test support and infrastructure and the monitoring of technical and engineering tasks. DFRC also contributed their engineering knowledge through their contributions in the areas of autonomous ground taxi control development, structural dynamics testing and analysis and the provision of other flight test support including telemetry data, tracking radars, and communications and control support equipment. The Air Force Flight Test Center acted at the Deputy Project Manager in this effort and was responsible for the provision of system safety support and airfield management and air traffic control services, among other supporting roles. The T-33 served as a J-UCAS surrogate aircraft and demonstrated flight characteristics similar to that of the the X-45A. The surrogate served as a significant risk reduction resource providing mission planning verification, range safety mission assessment and team training, among other contributions.

Report to the administrator by the NASA Aerospace Safety Advisory Panel on the Skylab program. Volume 2: Program implementation and maturity. [systems management evaluation and design analysis

NASA Technical Reports Server (NTRS)

1973-01-01

Results of the design and manufacturing reviews on the maturity of the Skylab modules are presented along with results of investigations on the scope of the cluster risk assessment efforts. The technical management system and its capability to assess and resolve problems are studied.

Toward Determining Best Practices for Recruiting Future Leaders in Food Science and Technology

ERIC Educational Resources Information Center

Stevenson, Clinton D.

2016-01-01

There is a shortage of qualified food scientists in the workforce that has adverse consequences for the quality and safety of our food supply. The Institute of Food Technologists and other institutions have initiated and continue to initiate outreach programs; however, an analysis of the effectiveness of these efforts has not yet come to fruition.…

RELAP-7 Code Assessment Plan and Requirement Traceability Matrix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Junsoo; Choi, Yong-joon; Smith, Curtis L.

2016-10-01

The RELAP-7, a safety analysis code for nuclear reactor system, is under development at Idaho National Laboratory (INL). Overall, the code development is directed towards leveraging the advancements in computer science technology, numerical solution methods and physical models over the last decades. Recently, INL has also been putting an effort to establish the code assessment plan, which aims to ensure an improved final product quality through the RELAP-7 development process. The ultimate goal of this plan is to propose a suitable way to systematically assess the wide range of software requirements for RELAP-7, including the software design, user interface, andmore » technical requirements, etc. To this end, we first survey the literature (i.e., international/domestic reports, research articles) addressing the desirable features generally required for advanced nuclear system safety analysis codes. In addition, the V&V (verification and validation) efforts as well as the legacy issues of several recently-developed codes (e.g., RELAP5-3D, TRACE V5.0) are investigated. Lastly, this paper outlines the Requirement Traceability Matrix (RTM) for RELAP-7 which can be used to systematically evaluate and identify the code development process and its present capability.« less

A Multi-Perspective Study on Safety Performance at the Colorado DOT

DOT National Transportation Integrated Search

2018-01-01

This effort focuses on the safety culture within CDOT and the effectiveness of the CDOT safety programs on improving safety culture. The study used a survey approach based on interviews with senior safety officials to determine the scope of the surve...

Linking Environmental Sustainability, Health, and Safety Data in Health Care: A Research Roadmap.

PubMed

Kaplan, Susan B; Forst, Linda

2017-08-01

Limited but growing evidence demonstrates that environmental sustainability in the health-care sector can improve worker and patient health and safety. Yet these connections are not appreciated or understood by decision makers in health-care organizations or oversight agencies. Several studies demonstrate improvements in quality of care, staff satisfaction, and work productivity related to environmental improvements in the health-care sector. A pilot study conducted by the authors found that already-collected data could be used to evaluate impacts of environmental sustainability initiatives on worker and patient health and safety, yet few hospitals do so. Future research should include a policy analysis of laws that could drive efforts to integrate these areas, elucidation of organizational models that promote sharing of environmental and health and safety data, and development of tools and methods to enable systematic linkage and evaluation of these data to expand the evidence base and improve the hospital environment.

Automated Mixed Traffic Vehicle (AMTV) technology and safety study

NASA Technical Reports Server (NTRS)

Johnston, A. R.; Peng, T. K. C.; Vivian, H. C.; Wang, P. K.

1978-01-01

Technology and safety related to the implementation of an Automated Mixed Traffic Vehicle (AMTV) system are discussed. System concepts and technology status were reviewed and areas where further development is needed are identified. Failure and hazard modes were also analyzed and methods for prevention were suggested. The results presented are intended as a guide for further efforts in AMTV system design and technology development for both near term and long term applications. The AMTV systems discussed include a low speed system, and a hybrid system consisting of low speed sections and high speed sections operating in a semi-guideway. The safety analysis identified hazards that may arise in a properly functioning AMTV system, as well as hardware failure modes. Safety related failure modes were emphasized. A risk assessment was performed in order to create a priority order and significant hazards and failure modes were summarized. Corrective measures were proposed for each hazard.

Radiation exposure control from the application of nuclear gauges in the mining industry in Ghana.

PubMed

Faanu, A; Darko, E O; Awudu, A R; Schandorf, C; Emi-Reynolds, G; Yeboah, J; Glover, E T; Kattah, V K

2010-05-01

The use of nuclear gauges for process control and elemental analysis in the mining industry in Ghana, West Africa, is wide spread and on the increase in recent times. The Ghana Radiation Protection Board regulates nuclear gauges through a system of notification and authorization by registration or licensing, inspection, and enforcement. Safety assessments for authorization and enforcement have been established to ensure the safety and security of radiation sources as well as protection of workers and the general public. Appropriate training of mine staff is part of the efforts to develop the necessary awareness about the safety and security of radiation sources. The knowledge and skills acquired will ensure the required protection and safety at the workplaces. Doses received by workers monitored over a period between 1998 and 2007 are well below the annual dose limit of 20 mSv recommended by the International Commission on Radiological Protection.

Safety evaluation of increasing retroreflectivity of STOP signs

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized 26 States : to participate in the FHWA Low-Cost Safety Improvements Pooled : Fund Study to evaluate low-cost safety strategies as part of its : strategic highway safety plan support effort. The purp...

Safety evaluation of advance street name signs

DOT National Transportation Integrated Search

2009-06-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. The objective of the pooled fund study was to estimate the safety effectivenes...

Single pilot IFR accident data analysis

NASA Technical Reports Server (NTRS)

Harris, D. F.

1983-01-01

The aircraft accident data recorded by the National Transportation and Safety Board (NTSR) for 1964-1979 were analyzed to determine what problems exist in the general aviation (GA) single pilot instrument flight rule (SPIFR) environment. A previous study conducted in 1978 for the years 1964-1975 provided a basis for comparison. This effort was generally limited to SPIFR pilot error landing phase accidents but includes some SPIFR takeoff and enroute accident analysis as well as some dual pilot IFR accident analysis for comparison. Analysis was performed for 554 accidents of which 39% (216) occurred during the years 1976-1979.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the third volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of appendices C through U of the report« less

An assessment of traffic safety culture related to engagement efforts to improve traffic safety : research programs.

DOT National Transportation Integrated Search

2016-12-01

The Center for Health and Safety Culture at Montana State University developed a survey to investigate the traffic safety culture related to engagement in traffic safety citizenship behaviors. The development of the survey was based on an augmented f...

An Alignment Analysis of the U.S. Navy Supply Corps Officer’s Career Guidance With Naval Supply Systems Command’s Strategic Publications

DTIC Science & Technology

2014-06-03

relationship to business outcomes such as customer satisfaction , turnover, safety, and productivity” (Shuck, 2011, p. 312). Follow-on studies using...during the analysis efforts of this research. The 339 Level 1 codes span a wide range of ideas from strategy execution to customer satisfaction and...not reflect the radical shift in corporate culture needed by Naval Supply Systems Command (NAVSUP) to better serve U.S. Navy customers . This research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew

'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

Advances in Measuring Culturally Competent Care: A Confirmatory Factor Analysis of CAHPS-CC in a Safety-net Population

PubMed Central

Stern, RJ; Fernandez, A; Jacobs, EA; Neilands, TB; Weech-Maldonado, R; Quan, J; Carle, A; Seligman, HK

2012-01-01

Background Providing culturally competent care shows promise as a mechanism to reduce healthcare inequalities. Until the recent development of the CAHPS Cultural Competency Item Set (CAHPS-CC), no measures capturing patient-level experiences with culturally competent care have been suitable for broad-scale administration. Methods We performed confirmatory factor analysis and internal consistency reliability analysis of CAHPS-CC among patients with type 2 diabetes (n=600) receiving primary care in safety-net clinics. CAHPS-CC domains were also correlated with global physician ratings. Results A 7-factor model demonstrated satisfactory fit (χ2(231)=484.34, p<.0001) with significant factor loadings at p<.05. Three domains showed excellent reliability – Doctor Communication- Positive Behaviors (α=.82), Trust (α=.77), and Doctor Communication- Health Promotion (α=.72). Four domains showed inadequate reliability either among Spanish speakers or overall (overall reliabilities listed): Doctor Communication- Negative Behaviors (α=.54), Equitable Treatment (α=.69), Doctor Communication- Alternative Medicine (α=.52), and Shared Decision-Making (α=.51). CAHPS-CC domains were positively and significantly correlated with global physician rating. Conclusions Select CAHPS-CC domains are suitable for broad-scale administration among safety-net patients. Those domains may be used to target quality-improvement efforts focused on providing culturally competent care in safety-net settings. PMID:22895231

Strengths, weaknesses, opportunities, and threats analysis of integrating the World Health Organization patient safety curriculum into undergraduate medical education in Pakistan: a qualitative case study

PubMed Central

2017-01-01

Purpose The purpose of this study was to conduct a strengths, weaknesses, opportunities, and threats (SWOT) analysis of integrating the World Health Organization (WHO) patient safety curriculum into undergraduate medical education in Pakistan. Methods A qualitative interpretive case study was conducted at Riphah International University, Islamabad, from October 2016 to June 2017. The study included 9 faculty members and 1 expert on patient safety. The interviews were audiotaped, and a thematic analysis of the transcripts was performed using NVivo software. Results Four themes were derived based on the need analysis model. The sub-themes derived from the collected data were arranged under the themes of strengths, weaknesses, opportunities, and threats, in accordance with the principles of SWOT analysis. The strengths identified were the need for a formal patient safety curriculum and its early integration into the undergraduate program. The weaknesses were faculty awareness and participation in development programs. The opportunities were an ongoing effort to develop an appropriate curriculum, to improve the current culture of healthcare, and to use the WHO curricular resource guide. The threats were attitudes towards patient safety in Pakistani culture, resistance to implementation from different levels, and the role of regulatory authorities. Conclusion The theme of patient safety needs to be incorporated early into the formal medical education curriculum, with the main goals of striving to do no harm and seeing mistakes as opportunities to learn. Faculty development activities need to be organized, and faculty members should to be encouraged to participate in them. The lack of a patient safety culture was identified as the primary reason for resistance to this initiative at many levels. The WHO curriculum, amended according to local institutional culture, can be implemented appropriately with support from the corresponding regulatory bodies. PMID:29284217

Patient Drug Safety Reporting: Diabetes Patients' Perceptions of Drug Safety and How to Improve Reporting of Adverse Events and Product Complaints.

PubMed

Patel, Puja; Spears, David; Eriksen, Betina Østergaard; Lollike, Karsten; Sacco, Michael

2018-03-01

Global health care manufacturer Novo Nordisk commissioned research regarding awareness of drug safety department activities and potential to increase patient feedback. Objectives were to examine patients' knowledge of pharmaceutical manufacturers' responsibilities and efforts regarding drug safety, their perceptions and experiences related to these efforts, and how these factors influence their thoughts and behaviors. Data were collected before and after respondents read a description of a drug safety department and its practices. We conducted quantitative survey research across 608 health care consumers receiving treatment for diabetes in the United States, Germany, United Kingdom, and Italy. This research validated initial, exploratory qualitative research (across 40 comparable consumers from the same countries) which served to guide design of the larger study. Before reading a drug safety department description, 55% of respondents were unaware these departments collect safety information on products and patients. After reading the description, 34% reported the department does more than they expected to ensure drug safety, and 56% reported "more confidence" in the industry as a whole. Further, 66% reported themselves more likely to report an adverse event or product complaint, and 60% reported that they were more likely to contact a drug safety department with questions. The most preferred communication methods were websites/online forums (39%), email (27%), and telephone (25%). Learning about drug safety departments elevates consumers' confidence in manufacturers' safety efforts and establishes potential for patients to engage in increased self-monitoring and reporting. Study results reveal potentially actionable insights for the industry across patient and physician programs and communications.

Toward an understanding of the impact of production pressure on safety performance in construction operations.

PubMed

Han, Sanguk; Saba, Farzaneh; Lee, Sanghyun; Mohamed, Yasser; Peña-Mora, Feniosky

2014-07-01

It is not unusual to observe that actual schedule and quality performances are different from planned performances (e.g., schedule delay and rework) during a construction project. Such differences often result in production pressure (e.g., being pressed to work faster). Previous studies demonstrated that such production pressure negatively affects safety performance. However, the process by which production pressure influences safety performance, and to what extent, has not been fully investigated. As a result, the impact of production pressure has not been incorporated much into safety management in practice. In an effort to address this issue, this paper examines how production pressure relates to safety performance over time by identifying their feedback processes. A conceptual causal loop diagram is created to identify the relationship between schedule and quality performances (e.g., schedule delays and rework) and the components related to a safety program (e.g., workers' perceptions of safety, safety training, safety supervision, and crew size). A case study is then experimentally undertaken to investigate this relationship with accident occurrence with the use of data collected from a construction site; the case study is used to build a System Dynamics (SD) model. The SD model, then, is validated through inequality statistics analysis. Sensitivity analysis and statistical screening techniques further permit an evaluation of the impact of the managerial components on accident occurrence. The results of the case study indicate that schedule delays and rework are the critical factors affecting accident occurrence for the monitored project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Night club patrons who feel safe will return: Evidence to encourage management to address club violence

PubMed Central

Johnson, Mark B.; Voas, Robert; Miller, Brenda A.; Byrnes, Hilary; Bourdeau, Beth

2017-01-01

Introduction There is substantial evidence that heavy drinking is associated with aggression and violence. Most managers of drinking establishments are required to maintain a security staff to deal with disruptive patrons who threaten an organization’s business or legal status. However, managers may focus little on minor instances of aggression even though these may escalate into more serious events. We hypothesize that proactive security efforts may positively affect patron’s perceptions of nighttime safety and influence their decisions to return to the club, thereby affecting the club’s bottom line. Method Data for this study were collected from entry and exit surveys with 1,714 attendees at 70 electronic music dance events at 10 clubs in the San Francisco Bay Area (2010–2012). Participants were asked to report on observations and experiences with aggressive behavior while in the club, their overall perception of club safety, and their plans to return to the same club in the next 30 days. Mediational multiple regression analysis was used to relate observations of club security to perceptions of personal safety and plans to return to the club. Results Reported observations of an active club security staff were positively related to perceptions of personal safety. Safety perceptions, in turn, were significantly related to plans to return to the club. The indirect path between perceptions of security and plans to return was significant as well. Conclusions The results suggest that an active security presence inside clubs can encourage club attendance by providing an environment where minor altercations are minimized, contributing to the perception of club safety. Practical Applications Evidence that proactive security efforts appear to increase return customers might motivate managers to implement better security policies. PMID:26875162

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan.

PubMed

Lee, Yii-Ching; Zeng, Pei-Shan; Huang, Chih-Hsuan; Wu, Hsin-Hung

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan

PubMed Central

Zeng, Pei-Shan; Huang, Chih-Hsuan

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored. PMID:29686825

Safety evaluation of flashing beacons at stop-controlled intersections

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized 26 States to participate in the FHWA Low-Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the study is to evaluate the safety ef...

Safety evaluation of STOP AHEAD pavement markings TechBrief

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized 26 States to participate in the FHWA Low-Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the study is to evaluate the safety ef...

Chief Student Affairs Officers' Interpretation and Implementation of the Minimum Legal Drinking Age and the Amethyst Initiative: A Discursive Policy Analysis

ERIC Educational Resources Information Center

Caldwell, Rebecca Jane

2012-01-01

High-risk drinking is an endemic health and safety issue for college campuses in the United States (U.S.). While public health officials have recommended various models for campus alcohol prevention efforts, in 2008 a group of college presidents recommended a controversial strategy: reconsidering the U.S. minimum legal drinking age (MLDA). The…

Local Food Systems Food Safety Concerns.

PubMed

Chapman, Benjamin; Gunter, Chris

2018-04-01

Foodborne disease causes an estimated 48 million illnesses and 3,000 deaths annually (Scallan E, et al., Emerg Infect Dis 17:7-15, 2011), with U.S. economic costs estimated at $152 billion to $1.4 trillion annually (Roberts T, Am J Agric Econ 89:1183-1188, 2007; Scharff RL, http://www.pewtrusts.org/en/research-and-analysis/reports/0001/01/01/healthrelated-costs-from-foodborne-illness-in-the-united-states, 2010). An increasing number of these illnesses are associated with fresh fruits and vegetables. An analysis of outbreaks from 1990 to 2003 found that 12% of outbreaks and 20% of outbreak-related illnesses were associated with produce (Klein S, Smith DeWaal CS, Center for Science in the Public Interest, https://cspinet.org/sites/default/files/attachment/ddreport.pdf, June 2008; Lynch M, Tauxe R, Hedberg C, Epidemiol Infect 137:307-315, 2009). These food safety problems have resulted in various stakeholders recommending the shift to a more preventative and risk-based food safety system. A modern risk-based food safety system takes a farm-to-fork preventative approach to food safety and relies on the proactive collection and analysis of data to better understand potential hazards and risk factors, to design and evaluate interventions, and to prioritize prevention efforts. Such a system focuses limited resources at the points in the food system with the likelihood of having greatest benefit to public health. As shared kitchens, food hubs, and local food systems such as community supported agriculture are becoming more prevalent throughout the United States, so are foodborne illness outbreaks at these locations. At these locations, many with limited resources, food safety methods of prevention are rarely the main focus. This lack of focus on food safety knowledge is why a growing number of foodborne illness outbreaks are occurring at these locations.

A methodology for accident analysis of fusion breeder blankets and its application to helium-cooled lead–lithium blanket

DOE PAGES

Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew; ...

2016-09-23

'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

The Armstrong Institute: An Academic Institute for Patient Safety and Quality Improvement, Research, Training, and Practice.

PubMed

Pronovost, Peter J; Holzmueller, Christine G; Molello, Nancy E; Paine, Lori; Winner, Laura; Marsteller, Jill A; Berenholtz, Sean M; Aboumatar, Hanan J; Demski, Renee; Armstrong, C Michael

2015-10-01

Academic medical centers (AMCs) could advance the science of health care delivery, improve patient safety and quality improvement, and enhance value, but many centers have fragmented efforts with little accountability. Johns Hopkins Medicine, the AMC under which the Johns Hopkins University School of Medicine and the Johns Hopkins Health System are organized, experienced similar challenges, with operational patient safety and quality leadership separate from safety and quality-related research efforts. To unite efforts and establish accountability, the Armstrong Institute for Patient Safety and Quality was created in 2011.The authors describe the development, purpose, governance, function, and challenges of the institute to help other AMCs replicate it and accelerate safety and quality improvement. The purpose is to partner with patients, their loved ones, and all interested parties to end preventable harm, continuously improve patient outcomes and experience, and eliminate waste in health care. A governance structure was created, with care mapped into seven categories, to oversee the quality and safety of all patients treated at a Johns Hopkins Medicine entity. The governance has a Patient Safety and Quality Board Committee that sets strategic goals, and the institute communicates these goals throughout the health system and supports personnel in meeting these goals. The institute is organized into 13 functional councils reflecting their behaviors and purpose. The institute works daily to build the capacity of clinicians trained in safety and quality through established programs, advance improvement science, and implement and evaluate interventions to improve the quality of care and safety of patients.

Testing the reliability and validity of a measure of safety climate.

PubMed

Anderson, E; McGovern, P M; Kochevar, L; Vesley, D; Gershon, R

2000-01-01

The lack of compliance with universal precautions (UP) is well documented across a wide variety of healthcare professions and has been reported both before and after the enactment of the Occupational Safety and Health Administration's Bloodborne Pathogens Standard. Gershon, Karkashian, and Felknor (1994) found that several factors correlated significantly with healthcare workers' lack of compliance with UP, including a measure of organizational safety climate (e.g., the employees' perception of their organizational culture and practices regarding safety). We conducted a secondary analysis using data from a cross-sectional survey of a convenience sample of 1,746 healthcare workers at risk of occupational exposure to bloodborne pathogens to assess the validity and reliability of Gershon's measure of safety climate. Findings revealed no relationship between safety climate and employees' gender, age, education, tenure in position, profession, hours worked per day, perceived risk, attitude toward risk, and training. An association was demonstrated between safety climate and (1) healthcare worker compliance with UP and (2) the availability of personal protective equipment, providing support for the construct validity of this measure of safety climate. These findings could be used by occupational health professionals to assess employees' perceptions of the safety culture and practices in the workplace and to guide the institution's risk management efforts in association with U.P.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Understanding parental motivators and barriers to uptake of child poison safety strategies: a qualitative study.

PubMed

Gibbs, L; Waters, E; Sherrard, J; Ozanne-Smith, J; Robinson, J; Young, S; Hutchinson, A

2005-12-01

To develop an understanding of factors acting as barriers and motivators to parental uptake of child poison safety strategies. A qualitative study involving semistructured interviews and focus groups. A grounded theory approach was used for the collection and analysis of data. Sixty five parents of children under 5 years of age, some of whom had experienced an unintentional child poisoning incident. A range of knowledge based, environmental, and behavioral barriers to comprehensive parental uptake of poison safety practices were identified. As a result there tended to be only partial implementation of safety initiatives in the home. Selection of safety practices was often guided by the interests and behaviors of the child. This made the child vulnerable to changes in the home environment, inadequate supervision, and/or shifts in their own behavior and developmental ability. Personal or vicarious exposure of a parent to a child poisoning incident was a significant motivator for parental review of safety practices. Environmental measures targeting child resistant containers, warning labels, and lockable poisons cupboards will support parents' efforts to maintain poison safety. Additional education campaigns using stories of actual poisoning incidents may help to increase awareness of risk and encourage increased uptake.

Unexpected Anomaly of GHF (Gradient Heating Furnace) On-Board

NASA Astrophysics Data System (ADS)

Kobayashi, Ryoji

2013-09-01

GHF (Gradient Heating Furnace) is vacuum furnace that enables to raise temperature up to 1600 degree Celsius. GHF consumes large amount of power (about 4 kW), contains pressure vessel and has interface with vacuum line. Therefore, GHF has hazardous function in nature. JAXA performed safety analysis thoroughly, identified all causes and set appropriate safety controls to meet safety requirements. JAXA launched GHF in January of 2011 and operates in Kibo laboratory of ISS (International Space Station). JAXA encountered unexpected anomalies during operations on-board. They did not give safety degradation actually since safety devices inherent to GHF worked, but some of anomalies were unexpected.This paper presents one of the "unexpected" anomaly happened on-board, and how it relates with safety and how it is controlled not to lead to safety accident.It is pretty hard to find out "root cause" for some of anomalies due to limited telemetry information and crew resources. In addition, most of engineers designing GHF have gone. This paper also introduces agency level efforts to struggle to find out causes and to set appropriate countermeasure.Finally, this paper summaries lessons and learned from anomaly JAXA encountered.

Safety evaluation of lane and shoulder width combinations on rural, two-lane, undivided roads

DOT National Transportation Integrated Search

2009-06-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. The goal of this study is to evaluate the safety effectiveness of various lane...

Hispanic Outreach: Delivering the Safety and Health Message.

ERIC Educational Resources Information Center

Delaney, Kathryn

2002-01-01

After a sharp increase in fatal accidents among Hispanic construction workers in Dallas, the Occupational Safety and Health Administration (OSHA) began aggressive outreach to the Mexican American community. Efforts included training bilingual safety trainers, offering workers' safety training in Spanish, and developing Spanish-language materials.…

The Pioneering Role of the Vaccine Safety Datalink Project (VSD) to Advance Collaborative Research and Distributed Data Networks

PubMed Central

Fahey, Kevin R.

2015-01-01

Introduction: Large-scale distributed data networks consisting of diverse stakeholders including providers, patients, and payers are changing health research in terms of methods, speed and efficiency. The Vaccine Safety Datalink (VSD) set the stage for expanded involvement of health plans in collaborative research. Expanding Surveillance Capacity and Progress Toward a Learning Health System: From an initial collaboration of four integrated health systems with fewer than 10 million covered lives to 16 diverse health plans with nearly 100 million lives now in the FDA Sentinel, the expanded engagement of health plan researchers has been essential to increase the value and impact of these efforts. The collaborative structure of the VSD established a pathway toward research efforts that successfully engage all stakeholders in a cohesive rather than competitive manner. The scientific expertise and methodology developed through the VSD such as rapid cycle analysis (RCA) to conduct near real-time safety surveillance allowed for the development of the expanded surveillance systems that now exist. Building on Success and Lessons Learned: These networks have learned from and built on the knowledge base and infrastructure created by the VSD investigators. This shared technical knowledge and experience expedited the development of systems like the FDA’s Mini-Sentinel and the Patient Centered Outcomes Research Institute (PCORI)’s PCORnet Conclusion: This narrative reviews the evolution of the VSD, its contribution to other collaborative research networks, longer-term sustainability of this type of distributed research, and how knowledge gained from the earlier efforts can contribute to a continually learning health system. PMID:26793736

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the first volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of an introduction, summary/conclusion, site description and assessment, description of facility, and description of operation.« less

Putting the ‘patient’ in patient safety: a qualitative study of consumer experiences

PubMed Central

Rathert, Cheryl; Brandt, Julie; Williams, Eric S.

2011-01-01

Abstract Background  Although patient safety has been studied extensively, little research has directly examined patient and family (consumer) perceptions. Evidence suggests that clinicians define safety differently from consumers, e.g. clinicians focus more on outcomes, whereas consumers may focus more on processes. Consumer perceptions of patient safety are important for several reasons. First, health‐care policy leaders have been encouraging patients and families to take a proactive role in ensuring patient safety; therefore, an understanding of how patients define safety is needed. Second, consumer perceptions of safety could influence outcomes such as trust and satisfaction or compliance with treatment protocols. Finally, consumer perspectives could be an additional lens for viewing complex systems and processes for quality improvement efforts. Objectives  To qualitatively explore acute care consumer perceptions of patient safety. Design and methods  Thirty‐nine individuals with a recent overnight hospital visit participated in one of four group interviews. Analysis followed an interpretive analytical approach. Results  Three basic themes were identified: Communication, staffing issues and medication administration. Consumers associated care process problems, such as delays or lack of information, with safety rather than as service quality problems. Participants agreed that patients need family caregivers as advocates. Conclusions  Consumers seem acutely aware of care processes they believe pose risks to safety. Perceptual measures of patient safety and quality may help to identify areas where there are higher risks of preventable adverse events. PMID:21624026

Chemical Safety for Sustainability Research Action Plan 2012-2016

EPA Pesticide Factsheets

EPA’s Chemical Safety for Sustainability (CSS) research program presents the purpose, design and themes of the Agency’s CSS research efforts to ensure safety in the design, manufacture and use of existing and future chemicals

Transportation of natural and other gases and liquids by pipeline occupational safety and health standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-05-17

The U.S. Materials Transportation Bureau (MTB) withdraws an advanced notice of proposed rulemaking (ANPR) which requested advice, recommendations, and information relating to the issuance of additional occupational safety and health standards for the protection of employees engaged in the construction, operation, and maintenance of pipeline systems and facilities used in the transportation of hazardous materials. Comments submitted in response to the ANPR indicated that the issuance of additional occupational safety and health standards by the MTB would be a duplication of the U.S. Occupational Safety and Health Administration's efforts and would increase the possibility of jurisdictional disputes. Since the MTB'smore » present standards development efforts are primarily directed at public safety (as opposed to occupational safety) by regulating pipeline design, construction, operation, and maintenance activities, the MTB withdraws the ANPR.« less

Fathers' views on their financial situations, father-child activities, and preventing child injuries.

PubMed

Olsen, Lise L; Oliffe, John L; Brussoni, Mariana; Creighton, Genevieve

2015-01-01

Unintentional injuries are a leading public health problem for children, particularly among those living at lower socioeconomic levels. Parents play an important preventive role, and the aim of this study was to examine fathers' views on the role of their family financial situation in preventing children's injuries. In-depth interviews were conducted with 15 fathers of children 2 to 7 years living in western Canada. Questions solicited fathers' views about their financial situation and their child injury prevention efforts. Data analysis was underpinned by masculinity theory and guided by constant comparative grounded theory methods. Findings included that fathers living with fewer financial limitations emphasized use of safety equipment and aligned themselves with provider and protector masculine ideals. Fathers with moderate financial constraint described more child-centered safety efforts and efforts to manage finances. Those facing greatest constraint demonstrated aspects of marginalized masculinities, whereby they acknowledged their economic provider limitations while strongly aligning with the protector role. These findings hold relevance for development of interventions aimed at reducing child injury risk inequities. Taking into account how masculinities may shape their beliefs and practices can inform design of father-centered interventions for men living at different points on the socioeconomic spectrum. © The Author(s) 2013.

Failure modes and effects analysis automation

NASA Technical Reports Server (NTRS)

Kamhieh, Cynthia H.; Cutts, Dannie E.; Purves, R. Byron

1988-01-01

A failure modes and effects analysis (FMEA) assistant was implemented as a knowledge based system and will be used during design of the Space Station to aid engineers in performing the complex task of tracking failures throughout the entire design effort. The three major directions in which automation was pursued were the clerical components of the FMEA process, the knowledge acquisition aspects of FMEA, and the failure propagation/analysis portions of the FMEA task. The system is accessible to design, safety, and reliability engineers at single user workstations and, although not designed to replace conventional FMEA, it is expected to decrease by many man years the time required to perform the analysis.

PLANNING FOR SAFETY ON THE JOBSITE. SAFETY IN INDUSTRY--CONSTRUCTION INDUSTRY SERIES.

ERIC Educational Resources Information Center

OTTO, FRANCIS L.; VAN ATTA, F.A.

WORK INJURIES AND THEIR MONETARY LOSSES IN THE CONSTRUCTION INDUSTRY CAN BE EFFECTIVELY PREVENTED ONLY THROUGH AN AGGRESSIVE AND WELL-PLANNED SAFETY EFFORT. THIS BULLETIN DISCUSSES THE "HOW" OF PLANNING FOR SAFETY ON THE JOBSITE. IT WAS PREPARED IN THE DIVISION OF PROGRAMING AND RESEARCH, OFFICE OF OCCUPATIONAL SAFETY. CONTENTS INCLUDE (1) THE…

Virtual Safety Training.

ERIC Educational Resources Information Center

Fuller, Scott; Davis, Jason

2003-01-01

The Multimedia Tool Box Talk is a web-based quick reference safety guide and training tool for construction personnel. An intended outcome of this effort was to provide an efficient and effective way to locate and interpret crucial safety information while at the job site. The tool includes information from the Occupational Safety and Health…

Do not blame the driver: a systems analysis of the causes of road freight crashes.

PubMed

Newnam, Sharon; Goode, Natassia

2015-03-01

Although many have advocated a systems approach in road transportation, this view has not meaningfully penetrated road safety research, practice or policy. In this study, a systems theory-based approach, Rasmussens's (1997) risk management framework and associated Accimap technique, is applied to the analysis of road freight transportation crashes. Twenty-seven highway crash investigation reports were downloaded from the National Transport Safety Bureau website. Thematic analysis was used to identify the complex system of contributory factors, and relationships, identified within the reports. The Accimap technique was then used to represent the linkages and dependencies within and across system levels in the road freight transportation industry and to identify common factors and interactions across multiple crashes. The results demonstrate how a systems approach can increase knowledge in this safety critical domain, while the findings can be used to guide prevention efforts and the development of system-based investigation processes for the heavy vehicle industry. A research agenda for developing an investigation technique to better support the application of the Accimap technique by practitioners in road freight transportation industry is proposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of efforts to optimise morbidity and mortality rounds to serve contemporary quality improvement and educational goals: a systematic review.

PubMed

Smaggus, Andrew; Mrkobrada, Marko; Marson, Alanna; Appleton, Andrew

2018-01-01

The quality and safety movement has reinvigorated interest in optimising morbidity and mortality (M&M) rounds. We performed a systematic review to identify effective means of updating M&M rounds to (1) identify and address quality and safety issues, and (2) address contemporary educational goals. Relevant databases (Medline, Embase, PubMed, Education Resource Information Centre, Cumulative Index to Nursing and Allied Health Literature, Healthstar, and Global Health) were searched to identify primary sources. Studies were included if they (1) investigated an intervention applied to M&M rounds, (2) reported outcomes relevant to the identification of quality and safety issues, or educational outcomes relevant to quality improvement (QI), patient safety or general medical education and (3) included a control group. Study quality was assessed using the Medical Education Research Study Quality Instrument and Newcastle-Ottawa Scale-Education instruments. Given the heterogeneity of interventions and outcome measures, results were analysed thematically. The final analysis included 19 studies. We identified multiple effective strategies (updating objectives, standardising elements of rounds and attaching rounds to a formal quality committee) to optimise M&M rounds for a QI/safety purpose. These efforts were associated with successful integration of quality and safety content into rounds, and increased implementation of QI interventions. Consistent effects on educational outcomes were difficult to identify, likely due to the use of methodologies ill-fitted for educational research. These results are encouraging for those seeking to optimise the quality and safety mission of M&M rounds. However, the inability to identify consistent educational effects suggests the investigation of M&M rounds could benefit from additional methodologies (qualitative, mixed methods) in order to understand the complex mechanisms driving learning at M&M rounds. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Migrant Farmworker Field and Camp Safety and Sanitation in Eastern North Carolina

PubMed Central

Whalley, Lara E.; Grzywacz, Joseph G.; Quandt, Sara A.; Vallejos, Quirina M.; Walkup, Michael; Chen, Haiying; Galvan, Leonardo; Arcury, Thomas A.

2009-01-01

Migrant farmworkers are exposed to numerous workplace hazards, with pesticides being a ubiquitous occupational exposure. This analysis describes farmworker experiences of field and camp safety conditions and their safety behaviors, and delineates farmworker characteristics associated with safety conditions and behaviors. Data were collected from 255 migrant farmworkers up to four times at monthly intervals during the 2007 agricultural season in eastern North Carolina. Measures assess field safety conditions and camp sanitation required by federal and state regulations. Most of the farmworkers were Latino men from Mexico. About 20% had not received pesticide safety training across the season; many of those who received such training did not understand it. Water for washing was not available for about one-third of the workers; soap and towels were not available for over half. About 20% lived in camps with more than eight workers per showerhead and about 20% lived in camps that failed to meet the standard of 30 or fewer workers per washtub/washing machine. Important predictors of variation included H2A visa status and years of experience. Four themes emerged from the analysis: (1) safety regulations are not consistently met; (2) farmworkers do not always practice safety behaviors; (3) camps become more crowded and less compliant during the middle of the agricultural season; and (4) workers with H2A visas experience better conditions and practice more safety behaviors than do workers who do not have H2A visas. Further research needs to account for social and cultural factors. Regulations should be compared with pesticide metabolite levels to measure their effectiveness. More effort is needed to enforce existing regulations. PMID:19894164

Buckling analysis of the quadripod structure for the NASA 70-meter antenna

NASA Technical Reports Server (NTRS)

Chian, Chian T.

1987-01-01

As part of the effort to extend the diameter of three Deep Space Network large earth antennas from 64 meters to 70 meters, a slim profiled quadripod structure was designed to support a 7.7 meter diameter subreflector for the 70 meter antenna. The new quadripod design, which particularly emphasizes reduced radio frequency blockage, is achieved by means of a narrow cross sectional profile of the legs. Buckling analysis, using NASTRAN, was conducted in this study to verify the safety margin for the quadripod structural stability.

Relationship between ethical leadership and organisational commitment of nurses with perception of patient safety culture.

PubMed

Lotfi, Zahra; Atashzadeh-Shoorideh, Foroozan; Mohtashami, Jamileh; Nasiri, Maliheh

2018-03-12

To determine the relationship between ethical leadership, organisational commitment of nurses and their perception of patient safety culture. Patient safety, organisational commitment and ethical leadership styles are very important for improving the quality of nursing care. In this descriptive-correlational study, 340 nurses were selected using random sampling from the hospitals in Tehran in 2016. Data were analysed using descriptive and inferential statistics in SPSS v.20. There was a significant positive relationship between the ethical leadership of nursing managers, perception of patient safety culture and organisational commitment. The regression analysis showed that nursing managers' ethical leadership and nurses' organisational commitment is a predictor of patient safety culture and confirms the relationship between the variables. Regarding the relationship between the nurses' safety performance, ethical leadership and organisational commitment, it seems that the optimisation of the organisational commitment and adherence to ethical leadership by administrators and managers in hospitals could improve the nurses' performance in terms of patient safety. Implementing ethical leadership seems to be one feasible strategy to improve nurses' organisational commitment and perception of patient safety culture. Efforts by nurse managers to develop ethical leadership reinforce organisational commitment to improve patient outcomes. Nurse managers' engagement and performance in this process is vital for a successful result. © 2018 John Wiley & Sons Ltd.

Safety evaluation of centerline plus shoulder rumble strips.

DOT National Transportation Integrated Search

2015-06-01

The Federal Highway Administration organized a pooled fund study of 38 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies selected for evaluation was the combined application of centerl...

Chemical Safety for Sustainability: Research Action Plan

EPA Pesticide Factsheets

The Strategic Research Action Plan for EPA’s Chemical Safety for Sustainability research program presents the purpose, design and themes of the Agency’s research efforts to ensure safety in the design, manufacture and use of existing and future chemicals.

Safety evaluation of wet reflective pavement markers.

DOT National Transportation Integrated Search

2015-09-01

The Federal Highway Administration organized a pooled fund study of 38 States to evaluate low-cost safety : strategies as part of its strategic highway safety effort. One of the strategies selected for evaluation was the : application of wet-reflecti...

Safety evaluation of wet-reflective pavement markings.

DOT National Transportation Integrated Search

2015-09-01

The Federal Highway Administration organized a pooled fund study of 38 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies selected for evaluation was the application of wet-reflective p...

Safety evaluation of intersection conflict warning system.

DOT National Transportation Integrated Search

2016-06-01

FHWA organized a pooled fund study of 40 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies selected for evaluation was intersection conflict warning systems (ICWSs). This strategy is i...

Safety evaluation of improved curve delineation

DOT National Transportation Integrated Search

2009-01-01

The Federal Highway Administration (FHWA) organized 26 States to participate in the FHWA Low Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the pooled fund study is to estimate t...

Advances in measuring culturally competent care: a confirmatory factor analysis of CAHPS-CC in a safety-net population.

PubMed

Stern, Rachel J; Fernandez, Alicia; Jacobs, Elizabeth A; Neilands, Torsten B; Weech-Maldonado, Robert; Quan, Judy; Carle, Adam; Seligman, Hilary K

2012-09-01

Providing culturally competent care shows promise as a mechanism to reduce health care inequalities. Until the recent development of the Consumer Assessment of Healthcare Providers and Systems Cultural Competency Item Set (CAHPS-CC), no measures capturing patient-level experiences with culturally competent care have been suitable for broad-scale administration. We performed confirmatory factor analysis and internal consistency reliability analysis of CAHPS-CC among patients with type 2 diabetes (n=600) receiving primary care in safety-net clinics. CAHPS-CC domains were also correlated with global physician ratings. A 7-factor model demonstrated satisfactory fit (χ²₂₃₁=484.34, P<0.0001) with significant factor loadings at P<0.05. Three domains showed excellent reliability-Doctor Communication-Positive Behaviors (α=0.82), Trust (α=0.77), and Doctor Communication-Health Promotion (α=0.72). Four domains showed inadequate reliability either among Spanish speakers or overall (overall reliabilities listed): Doctor Communication-Negative Behaviors (α=0.54), Equitable Treatment (α=0.69), Doctor Communication-Alternative Medicine (α=0.52), and Shared Decision-Making (α=0.51). CAHPS-CC domains were positively and significantly correlated with global physician rating. Select CAHPS-CC domains are suitable for broad-scale administration among safety-net patients. Those domains may be used to target quality-improvement efforts focused on providing culturally competent care in safety-net settings.

Sustainable development and next generation's health: a long-term perspective about the consequences of today's activities for food safety.

PubMed

Frazzoli, Chiara; Petrini, Carlo; Mantovani, Alberto

2009-01-01

Development is defined sustainable when it meets the needs of the present without compromising the ability of future generations to meet their own needs. Pivoting on social, environmental and economic aspects of food chain sustainability, this paper presents the concept of sustainable food safety based on the prevention of risks and burden of poor health for generations to come. Under this respect, the assessment of long-term, transgenerational risks is still hampered by serious scientific uncertainties. Critical issues to the development of a sustainable food safety framework may include: endocrine disrupters as emerging contaminants that specifically target developing organisms; toxicological risks assessment in Countries at the turning point of development; translating knowledge into toxicity indexes to support risk management approaches, such as hazard analysis and critical control points (HACCP); the interplay between chemical hazards and social determinants. Efforts towards the comprehensive knowledge and management of key factors of sustainable food safety appear critical to the effectiveness of the overall sustainability policies.

Perceived Neighborhood Safety, Social Cohesion, and Psychological Health of Older Adults.

PubMed

Choi, Yeon Jin; Matz-Costa, Christina

2018-01-18

We aimed to investigate the interactive effects of perceived neighborhood safety and social cohesion on the psychological health of older adults with and without functional impairments. This cross-sectional study included 13,897 community-dwelling older adults (aged 65 years and older) from the 2011-2012 California Health Interview Survey (CHIS). Hypotheses were tested using weighted moderated ordinary least squared regression analysis. Perceived neighborhood safety was significantly associated with psychological health regardless of respondents' physical functioning, although the effect was greater among older adults with functional limitations. Perceived social cohesion, however, was only significantly related to psychological health among those with functional limitations. Among physically impaired respondents, social cohesion buffered the ill-effect of an unsafe neighborhood on psychological health. Findings suggest that efforts to promote perceived neighborhood safety and social cohesion are essential to the well-being of older adults. Special attention should be paid to older adults with functional limitations, who appear to be more vulnerable to the negative effects of neighborhood environments.

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence

PubMed Central

2013-01-01

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and “green chemistry” principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers. PMID:23587312

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence.

PubMed

Schulte, Paul A; McKernan, Lauralynn T; Heidel, Donna S; Okun, Andrea H; Dotson, Gary Scott; Lentz, Thomas J; Geraci, Charles L; Heckel, Pamela E; Branche, Christine M

2013-04-15

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and "green chemistry" principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers.

Road death trend in the United States: implied effects of prevention.

PubMed

Robertson, Leon

2018-05-01

This study estimates road deaths prevented by U.S. vehicle safety regulations, state laws, and other efforts based on comparison of actual deaths to those predicted from temperature and precipitation effects on exposure, migration to warmer areas, population growth, median age of the population, and vehicle mix. Logistic regression of risk factors predictive of road deaths in 1961, prior to the adoption of federal vehicle safety regulations, state behavioral change laws, and other preventive efforts were used to predict deaths in subsequent years given the changing prevalence of the risk factors from 1962 to 2015. The included risk factors are strong predictors of road death risk. Without the preventive efforts, an additional 5.8 million road deaths would likely have occurred in the U.S. from the initiation of federal safety standards for new vehicles in 1968 through 2015.

Adjusting the Passing Scores for Gearing up for Safety: Production Agriculture Safety Training for Youth Curriculum Test Instruments

ERIC Educational Resources Information Center

Hoover, William Brian; French, Brian F.; Field, William E.; Tormoehlen, Roger L.

2012-01-01

Minimum passing scores for the Gearing Up for Safety: Production Agriculture Safety Training for Youth curriculum (Gearing Up for Safety) were set in 2006 with widely used and established procedures by efforts of subject matter experts (French, Breidenbach et al., 2007; French, Field, and Tormoehlen, 2006, 2007). While providing a research-based…

Commonalities in Transportation Fire Safety : Regulations, Research and Development, and Data Bases

DOT National Transportation Integrated Search

1980-01-01

This report presents a comprehensive review of current modal fire safety efforts within the U.S. Department of Transportation. Common fire safety problems and modal administration response are identified. Work completed includes a review of modal adm...

Safety evaluation of STOP AHEAD pavement markings

DOT National Transportation Integrated Search

2007-12-01

The Federal Highway Administration (FHWA) organized a Pooled Fund Study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was STOP AHEAD pav...

Safety evaluation of STOP AHEAD pavement markings

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized a Pooled Fund Study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was STOP AHEAD pav...

Developing safety performance measures for roundabout applications in the state of Oregon.

DOT National Transportation Integrated Search

2013-04-01

This report documents the research effort to quantify the safety performance of roundabouts in the State of Oregon. : The primary goal of this research is to provide the Oregon Department of Transportation (ODOT) with safety : performance functions (...

Safety evaluation of advance street name signs

DOT National Transportation Integrated Search

2009-06-01

The Federal Highway Administration (FHWA) organized 26 States to participate in the FHWA Low-Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the pooled fund study is to estimate t...

77 FR 48970 - Sunshine Act Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Sunshine Act Notice AGENCY: Defense Nuclear Facilities... given of the Defense Nuclear Facilities Safety Board's (Board) public meeting and hearing described... (NNSA) efforts to mitigate risks to public and worker safety posed by aging defense nuclear facilities...

Scan tour of safety-related intelligent transportation systems across the United States.

DOT National Transportation Integrated Search

2015-09-01

The Utah Department of Transportation (UDOT) has long been on the forefront of nationwide efforts to improve : roadway safety. Their safety focus encompasses infrastructure improvements as well as non-infrastructure elements : such as education and e...

Highway safety in black/African-American communities : issues and strategies

DOT National Transportation Integrated Search

2002-09-17

As traffic safety needs and problems differ across populations, so are the strategies required to address them. Efforts to improve traffic safety in the Black community have been handicapped, however, by a lack of information on communication strateg...

Safety evaluation of wet-reflective pavement markings : tech brief.

DOT National Transportation Integrated Search

2015-12-01

The Federal Highway Administration (FHWA) organized : 38 States for the FHWA Evaluation of Low-Cost Safety : Improvements Pooled Fund Study as part of its strategic : highway safety plan support effort. The purpose of the : study is to evaluate the s...

Prevention, The Beginning of the Rehabilitation Process: A View from New Zealand. Monograph #46.

ERIC Educational Resources Information Center

Campbell, Ian B.

The monograph argues that prevention should be considered the first step in the rehabilitation process, and examines preventive efforts in the areas of occupational safety, road safety, home safety, and sporting and recreational safety. Following an introductory chapter, other chapters discuss: (1) the close relationship between compensation,…

Motor carrier safety : reincarnating commercial vehicle companies pose safety threat to motoring public; federal safety agency has initiated efforts to prevent future occurrences.

DOT National Transportation Integrated Search

2009-07-01

In 2008, the Federal Motor Carrier Safety Administration (FMCSA) reports that there were about 300 fatalities from bus crashes in the United States. Although bus crashes are relatively rare, they are particularly deadly since many individuals may be ...

Consumer Product Safety Commission. Consumer Education Efforts for Revised Children's Sleepwear Safety Standard.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

A study examined the type and extent of consumer education that occurred since the Consumer Product Safety Commission (CPSC) amended the 1972 federal safety standards (effective January 1997) to permit marketing of snug-fitting, nonflame-resistant cotton garments as sleepwear. Three voluntary point-of-sale (POS) practices recognized as important…

School Climate: An Essential Component of a Comprehensive School Safety Plan

ERIC Educational Resources Information Center

Stark, Heidi

2017-01-01

The intentional assessment and management of school climate is an essential component of a comprehensive school safety plan. The value of this preventive aspect of school safety is often diminished as schools invest resources in physical security measures as a narrowly focused effort to increase school safety (Addington, 2009). This dissertation…

Role of champions in the implementation of patient safety practice change.

PubMed

Soo, Stephanie; Berta, Whitney; Baker, G Ross

2009-01-01

Practitioners of patient safety practice change agree that champions are central to the success of implementation. The clinical champion role is a concept that has been widely promoted yet empirically underdeveloped in health services literature. Questions remain as to who these champions are, what roles they play in patient safety practice change and what contexts serve to facilitate their efforts. This investigation used a multiple-case study design to critically examine the role of champions in the implementation of rapid response teams (RRTs), an innovative complex patient safety intervention, in two large urban acute care facilities. An analysis of interviews with key individuals involved in the RRT implementation process revealed a typology of the patient safety practice champion that extended beyond clinical personnel to include managerial and executive staff. Champions engaged to a varying extent in a number of core activities, including education, advocacy, relationship building and boundary spanning. Individuals became champions both through informal emergence and a combination of formal appointment and informal emergence. By identifying and elaborating upon specific features of the champion role, this study aims to expand the dialogue about champions for patient safety practice change.

100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

PubMed

Hofmann, David A; Burke, Michael J; Zohar, Dov

2017-03-01

Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Understanding middle managers' influence in implementing patient safety culture.

PubMed

Gutberg, Jennifer; Berta, Whitney

2017-08-22

The past fifteen years have been marked by large-scale change efforts undertaken by healthcare organizations to improve patient safety and patient-centered care. Despite substantial investment of effort and resources, many of these large-scale or "radical change" initiatives, like those in other industries, have enjoyed limited success - with practice and behavioural changes neither fully adopted nor ultimately sustained - which has in large part been ascribed to inadequate implementation efforts. Culture change to "patient safety culture" (PSC) is among these radical change initiatives, where results to date have been mixed at best. This paper responds to calls for research that focus on explicating factors that affect efforts to implement radical change in healthcare contexts, and focuses on PSC as the radical change implementation. Specifically, this paper offers a novel conceptual model based on Organizational Learning Theory to explain the ability of middle managers in healthcare organizations to influence patient safety culture change. We propose that middle managers can capitalize on their unique position between upper and lower levels in the organization and engage in 'ambidextrous' learning that is critical to implementing and sustaining radical change. This organizational learning perspective offers an innovative way of framing the mid-level managers' role, through both explorative and exploitative activities, which further considers the necessary organizational context in which they operate.

The outcomes of recent patient safety education interventions for trainee physicians and medical students: a systematic review

PubMed Central

Kirkman, Matthew A; Sevdalis, Nick; Arora, Sonal; Baker, Paul; Vincent, Charles; Ahmed, Maria

2015-01-01

Objective To systematically review the latest evidence for patient safety education for physicians in training and medical students, updating, extending and improving on a previous systematic review on this topic. Design A systematic review. Data sources Embase, Ovid Medline and PsycINFO databases. Study selection Studies including an evaluation of patient safety training interventions delivered to trainees/residents and medical students published between January 2009 and May 2014. Data extraction The review was performed using a structured data capture tool. Thematic analysis also identified factors influencing successful implementation of interventions. Results We identified 26 studies reporting patient safety interventions: 11 involving students and 15 involving trainees/residents. Common educational content included a general overview of patient safety, root cause/systems-based analysis, communication and teamwork skills, and quality improvement principles and methodologies. The majority of courses were well received by learners, and improved patient safety knowledge, skills and attitudes. Moreover, some interventions were shown to result in positive behaviours, notably subsequent engagement in quality improvement projects. No studies demonstrated patient benefit. Availability of expert faculty, competing curricular/service demands and institutional culture were important factors affecting implementation. Conclusions There is an increasing trend for developing educational interventions in patient safety delivered to trainees/residents and medical students. However, significant methodological shortcomings remain and additional evidence of impact on patient outcomes is needed. While there is some evidence of enhanced efforts to promote sustainability of such interventions, further work is needed to encourage their wider adoption and spread. PMID:25995240

Development of guidance for states transitioning to new safety analysis tools

NASA Astrophysics Data System (ADS)

Alluri, Priyanka

With about 125 people dying on US roads each day, the US Department of Transportation heightened the awareness of critical safety issues with the passage of SAFETEA-LU (Safe Accountable Flexible Efficient Transportation Equity Act---a Legacy for Users) legislation in 2005. The legislation required each of the states to develop a Strategic Highway Safety Plan (SHSP) and incorporate data-driven approaches to prioritize and evaluate program outcomes: Failure to do so resulted in funding sanctioning. In conjunction with the legislation, research efforts have also been progressing toward the development of new safety analysis tools such as IHSDM (Interactive Highway Safety Design Model), SafetyAnalyst, and HSM (Highway Safety Manual). These software and analysis tools are comparatively more advanced in statistical theory and level of accuracy, and have a tendency to be more data intensive. A review of the 2009 five-percent reports and excerpts from the nationwide survey revealed astonishing facts about the continuing use of traditional methods including crash frequencies and rates for site selection and prioritization. The intense data requirements and statistical complexity of advanced safety tools are considered as a hindrance to their adoption. In this context, this research aims at identifying the data requirements and data availability for SafetyAnalyst and HSM by working with both the tools. This research sets the stage for working with the Empirical Bayes approach by highlighting some of the biases and issues associated with the traditional methods of selecting projects such as greater emphasis on traffic volume and regression-to-mean phenomena. Further, the not-so-obvious issue with shorter segment lengths, which effect the results independent of the methods used, is also discussed. The more reliable and statistically acceptable Empirical Bayes methodology requires safety performance functions (SPFs), regression equations predicting the relation between crashes and exposure for a subset of roadway network. These SPFs, specific to a region and the analysis period are often unavailable. Calibration of already existing default national SPFs to the state's data could be a feasible solution, but, how well the state's data is represented is a legitimate question. With this background, SPFs were generated for various classifications of segments in Georgia and compared against the national default SPFs used in SafetyAnalyst calibrated to Georgia data. Dwelling deeper into the development of SPFs, the influence of actual and estimated traffic data on the fit of the equations is also studied questioning the accuracy and reliability of traffic estimations. In addition to SafetyAnalyst, HSM aims at performing quantitative safety analysis. Applying HSM methodology to two-way two-lane rural roads, the effect of using multiple CMFs (Crash Modification Factors) is studied. Lastly, data requirements, methodology, constraints, and results are compared between SafetyAnalyst and HSM.

Management Advisory Memorandum on Airline Safety Data for Consumers; Federal Aviation Administration

DOT National Transportation Integrated Search

1996-10-28

This is a review of whether the Department of Transportation (DOT) provides adequate comparative information to consumers on the safety record of airlines. This review was undertaken in light of recent concerns over airline safety and DOT's efforts t...

Improving Student Safety.

ERIC Educational Resources Information Center

Dorn, Michael; Trump, Kenneth S.; Nichols, R. Leslie

2001-01-01

Presents the latest information on how schools can keep their students safe. Safety oriented actions discussed cover incident reporting and tracking, tactical site surveys, school safety and emergency operations planning, staff development efforts, and facility design. Explains the need to review and test specific prevention concepts and emergency…

Safety evaluation of flashing beacons at STOP-controlled intersections

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was flashing beaco...

Safety belt and motorcycle helmet use in Virginia : the Summer 2008 update.

DOT National Transportation Integrated Search

2008-01-01

This survey was conducted at the request of the Virginia Department of Motor Vehicles to track the effectiveness of programmatic efforts carried out to increase safety belt usage in Virginia. The official Virginia safety belt use survey is conducted ...

Food Safety and Quality. Uniform, Risk-Based Inspection System Needed to Ensure Safe Food Supply,

DTIC Science & Technology

1992-06-01

Concerned about the effectiveness of the federal food safety inspection system, the Chairman, Subcommittee on Oversight and Investigations, House...federal resources for inspection, and (3) agencies are effectively coordinating their food safety and quality inspection efforts.

Safety evaluation of increasing retroreflectivity of STOP signs

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration (FHWA) organized a Pooled Fund Study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was STOP signs wit...

Evaluation of US 119 Pine Mountain safety improvements : interim report.

DOT National Transportation Integrated Search

2003-10-01

The safety improvement project for a section of US 119 across Pine Mountain in Letcher County was initiated as an interim effort to address safety issues related t o roadway geometrics and specific problems related to truck traffic. : Specific object...

Linking sustainable transportation in a university community : final report.

DOT National Transportation Integrated Search

2010-01-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. The purpose of the FHWA Low-Cost Safety Improvements Pooled Fund Study is to e...

Evaluating the impact of grade crossing safety factors through signal detection theory

DOT National Transportation Integrated Search

2012-10-22

The purpose of this effort was to apply signal detection theory to descriptively model the impact : of five grade crossing safety factors to understand their effect on driver decision making. The : safety factors consisted of: improving commercial mo...

Safety evaluation of offset improvements for left-turn lanes

DOT National Transportation Integrated Search

2009-06-01

The Federal Highway Administration (FHWA) organized 26 States to participate in the FHWA Low Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the pooled fund study is to estimate t...

Safety evaluation of intersection conflict warning systems (ICWS), TechBrief

DOT National Transportation Integrated Search

2016-02-02

The Federal Highway Administration (FHWA) organized 40 States to participate in the FHWA Evaluation of LowCost Safety Improvements Pooled Fund Study (ELCSI-PFS) as part of its strategic highway safety plan support effort. The goal of the ELCSI-PFS re...

Safety evaluation of centerline plus shoulder rumble strips, TechBrief

DOT National Transportation Integrated Search

2015-09-01

The Federal Highway Administration (FHWA) organized 37 States to participate in the FHWA Evaluation of Low-Cost Safety Improvements Pooled Fund Study as part of its strategic highway safety plan support effort. The purpose of the study was to evaluat...

Safety evaluation of offset improvements for left-turn lanes

DOT National Transportation Integrated Search

2009-06-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was offset improve...

The implementation and assessment of a quality and safety culture education program in a large radiation oncology department.

PubMed

Woodhouse, Kristina D; Volz, Edna; Bellerive, Marc; Bergendahl, Howard W; Gabriel, Peter E; Maity, Amit; Hahn, Stephen M; Vapiwala, Neha

2016-01-01

In 2010, the American Society for Radiation Oncology launched a national campaign to improve patient safety in radiation therapy. One recommendation included the expansion of educational programs dedicated to quality and safety. We subsequently implemented a quality and safety culture education program (Q-SCEP) in our large radiation oncology department. The purpose of this study is to describe the design, implementation, and impact of this Q-SCEP. In 2010, we instituted a comprehensive Q-SCEP, consisting of a longitudinal series of lectures, meetings, and interactive workshops. Participation was mandatory for all department members across all network locations. Electronic surveys were administered to assess employee engagement, knowledge retention, preferred learning styles, and the program's overall impact. The Agency for Healthcare Research and Quality (AHRQ) Survey on Patient Safety Culture was administered. Analysis of variance was used for statistical analysis. Between 2010 and 2015, 100% of targeted staff participated in Q-SCEP. Thirty-three percent (132 of 400) and 30% (136 of 450) responded to surveys in 2012 and 2014, respectively. Mean scores improved from 73% to 89% (P < .001), with the largest improvement seen among therapists (+21.7%). The majority strongly agreed that safety culture education was critical to performing their jobs well. Full course compliance was achieved despite the sizable number of personnel and treatment centers. Periodic assessments demonstrated high knowledge retention, which significantly improved over time in nearly all department divisions. Additionally, our AHRQ patient safety grade remains high and continues to improve. These results will be used to further enhance ongoing internal safety initiatives and to inform future innovative efforts. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Defining Desirable Central Nervous System Drug Space through the Alignment of Molecular Properties, in Vitro ADME, and Safety Attributes

PubMed Central

2010-01-01

As part of our effort to increase survival of drug candidates and to move our medicinal chemistry design to higher probability space for success in the Neuroscience therapeutic area, we embarked on a detailed study of the property space for a collection of central nervous system (CNS) molecules. We carried out a thorough analysis of properties for 119 marketed CNS drugs and a set of 108 Pfizer CNS candidates. In particular, we focused on understanding the relationships between physicochemical properties, in vitro ADME (absorption, distribution, metabolism, and elimination) attributes, primary pharmacology binding efficiencies, and in vitro safety data for these two sets of compounds. This scholarship provides guidance for the design of CNS molecules in a property space with increased probability of success and may lead to the identification of druglike candidates with favorable safety profiles that can successfully test hypotheses in the clinic. PMID:22778836

An observational analysis of surgical team compliance with perioperative safety practices after crew resource management training.

PubMed

France, Daniel J; Leming-Lee, Susie; Jackson, Tom; Feistritzer, Nancye R; Higgins, Michael S

2008-04-01

Acknowledging the need to improve team communication and coordination among health care providers, health care administrators and improvement officers have been quick to endorse and invest in aviation crew resource management (CRM). Despite the increased interest in CRM there exists limited data on the effectiveness of CRM to change team behavior and performance in clinical settings. Direct observational analyses were performed on 30 surgical teams (15 neurosurgery cases and 15 cardiac cases) to evaluate surgical team compliance with integrated safety and CRM practices after extensive CRM training. Observed surgical teams were compliant with only 60% of the CRM and perioperative safety practices emphasized in the training program. The results highlight many of the challenges the health care industry faces in its efforts to adapt CRM from aviation to medicine. Additional research is needed to develop and test new team training methods and performance feedback mechanisms for clinical teams.

NASA Range Safety Annual Report 2007

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2007-01-01

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

Translating infection control guidelines into practice: implementation process within a health care institution.

PubMed

Raveis, Victoria H; Conway, Laurie J; Uchida, Mayuko; Pogorzelska-Maziarz, Monika; Larson, Elaine L; Stone, Patricia W

2014-04-01

Health-care-associated infections (HAIs) remain a major patient safety problem even as policy and programmatic efforts designed to reduce HAIs have increased. Although information on implementing effective infection control (IC) efforts has steadily grown, knowledge gaps remain regarding the organizational elements that improve bedside practice and accommodate variations in clinical care settings. We conducted in-depth, semistructured interviews in 11 hospitals across the United States with a range of hospital personnel involved in IC (n = 116). We examined the collective nature of IC and the organizational elements that can enable disparate groups to work together to prevent HAIs. Our content analysis of participants' narratives yielded a rich description of the organizational process of implementing adherence to IC. Findings document the dynamic, fluid, interactional, and reactive nature of this process. Three themes emerged: implementing adherence efforts institution-wide, promoting an institutional culture to sustain adherence, and contending with opposition to the IC mandate.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunett, A. J.; Fanning, T. H.

The United States has extensive experience with the design, construction, and operation of sodium cooled fast reactors (SFRs) over the last six decades. Despite the closure of various facilities, the U.S. continues to dedicate research and development (R&D) efforts to the design of innovative experimental, prototype, and commercial facilities. Accordingly, in support of the rich operating history and ongoing design efforts, the U.S. has been developing and maintaining a series of tools with capabilities that envelope all facets of SFR design and safety analyses. This paper provides an overview of the current U.S. SFR analysis toolset, including codes such asmore » SAS4A/SASSYS-1, MC2-3, SE2-ANL, PERSENT, NUBOW-3D, and LIFE-METAL, as well as the higher-fidelity tools (e.g. PROTEUS) being integrated into the toolset. Current capabilities of the codes are described and key ongoing development efforts are highlighted for some codes.« less

Applied Use of Safety Event Occurrence Control Charts of Harm and Non-Harm Events: A Case Study.

PubMed

Robinson, Susan N; Neyens, David M; Diller, Thomas

Most hospitals use occurrence reporting systems that facilitate identifying serious events that lead to root cause investigations. Thus, the events catalyze improvement efforts to mitigate patient harm. A serious limitation is that only a few of the occurrences are investigated. A challenge is leveraging the data to generate knowledge. The goal is to present a methodology to supplement these incident assessment efforts. The framework affords an enhanced understanding of patient safety through the use of control charts to monitor non-harm and harm incidents simultaneously. This approach can identify harm and non-harm reporting rates and also can facilitate monitoring occurrence trends. This method also can expedite identifying changes in workflow, processes, or safety culture. Although unable to identify root causes, this approach can identify changes in near real time. This approach also supports evaluating safety or policy interventions that may not be observable in annual safety climate surveys.

Safety and health in biomass production, transportation, and storage: a commentary based on the biomass and biofuels session at the 2013 North American Agricultural Safety Summit.

PubMed

Yoder, Aaron M; Schwab, Charles; Gunderson, Paul; Murphy, Dennis

2014-01-01

There is significant interest in biomass production ranging from government agencies to the private sector, both inside and outside of the traditional production agricultural setting. This interest has led to an increase in the development and production of biomass crops. Much of this effort has focused on specific segments of the process, and more specifically on the mechanics of these individual segments. From a review of scientific literature, it is seen that little effort has been put into identifying, classifying and preventing safety hazards in on-farm biomass production systems. This commentary describes the current status of the knowledge pertaining to health and safety factors of biomass production and storage in the US and identifies areas of standards development that the biomass industry needs from the agricultural safety and health community.

Prioritizing Threats to Patient Safety in Rural Primary Care

ERIC Educational Resources Information Center

Singh, Ranjit; Singh, Ashok; Servoss, Timothy J.; Singh, Gurdev

2007-01-01

Context: Rural primary care is a complex environment in which multiple patient safety challenges can arise. To make progress in improving safety with limited resources, each practice needs to identify those safety problems that pose the greatest threat to patients and focus efforts on these. Purpose: To describe and field-test a novel approach to…

Community-based Injury Prevention Interventions.

ERIC Educational Resources Information Center

Klassen, Terry P.; MacKay, J. Morag; Moher, David; Walker, Annie; Jones, Alison L.

2000-01-01

Reviewed 32 studies that evaluated the impact of community-based injury prevention efforts on childhood injuries, safety behaviors, and adoption of safety devices. Interventions targeted schools, municipalities, and cities. This approach effectively increased some safety practices (e.g, bicycle helmet and car seat use) but not others. Common…

An assessment of traffic safety culture related to engagement in efforts to improve traffic safety : final report.

DOT National Transportation Integrated Search

2016-12-01

This final report summarizes the methods, results, conclusions, and recommendations derived from a survey conducted to understand values, beliefs, and attitudes regarding engagement in behaviors that impact the traffic safety of others. Results of th...

Drug research methodology. Volume 1, The alcohol-highway safety experience and its applicability to other drugs

DOT National Transportation Integrated Search

1980-03-01

This report presents the findings of a workshop concerning the alcohol and highway safety experience, which includes research efforts to define the drinking-driving problem and societal responses to reduce the increased highway safety risk attributab...

The village/commune safety policy and HIV prevention efforts among key affected populations in Cambodia: finding a balance

PubMed Central

2012-01-01

The Village/Commune Safety Policy was launched by the Ministry of Interior of the Kingdom of Cambodia in 2010 and, due to a priority focus on “cleaning the streets”, has created difficulties for HIV prevention programs attempting to implement programs that work with key affected populations including female sex workers and people who inject drugs. The implementation of the policy has forced HIV program implementers, the UN and various government counterparts to explore and develop collaborative ways of delivering HIV prevention services within this difficult environment. The following case study explores some of these efforts and highlights the promising development of a Police Community Partnership Initiative that it is hoped will find a meaningful balance between the Village/Commune Safety Policy and HIV prevention efforts with key affected populations in Cambodia. PMID:22770267

Safety modelling and testing of lithium-ion batteries in electrified vehicles

NASA Astrophysics Data System (ADS)

Deng, Jie; Bae, Chulheung; Marcicki, James; Masias, Alvaro; Miller, Theodore

2018-04-01

To optimize the safety of batteries, it is important to understand their behaviours when subjected to abuse conditions. Most early efforts in battery safety modelling focused on either one battery cell or a single field of interest such as mechanical or thermal failure. These efforts may not completely reflect the failure of batteries in automotive applications, where various physical processes can take place in a large number of cells simultaneously. In this Perspective, we review modelling and testing approaches for battery safety under abuse conditions. We then propose a general framework for large-scale multi-physics modelling and experimental work to address safety issues of automotive batteries in real-world applications. In particular, we consider modelling coupled mechanical, electrical, electrochemical and thermal behaviours of batteries, and explore strategies to extend simulations to the battery module and pack level. Moreover, we evaluate safety test approaches for an entire range of automotive hardware sets from cell to pack. We also discuss challenges in building this framework and directions for its future development.

Analyzing and Predicting Effort Associated with Finding and Fixing Software Faults

NASA Technical Reports Server (NTRS)

Hamill, Maggie; Goseva-Popstojanova, Katerina

2016-01-01

Context: Software developers spend a significant amount of time fixing faults. However, not many papers have addressed the actual effort needed to fix software faults. Objective: The objective of this paper is twofold: (1) analysis of the effort needed to fix software faults and how it was affected by several factors and (2) prediction of the level of fix implementation effort based on the information provided in software change requests. Method: The work is based on data related to 1200 failures, extracted from the change tracking system of a large NASA mission. The analysis includes descriptive and inferential statistics. Predictions are made using three supervised machine learning algorithms and three sampling techniques aimed at addressing the imbalanced data problem. Results: Our results show that (1) 83% of the total fix implementation effort was associated with only 20% of failures. (2) Both safety critical failures and post-release failures required three times more effort to fix compared to non-critical and pre-release counterparts, respectively. (3) Failures with fixes spread across multiple components or across multiple types of software artifacts required more effort. The spread across artifacts was more costly than spread across components. (4) Surprisingly, some types of faults associated with later life-cycle activities did not require significant effort. (5) The level of fix implementation effort was predicted with 73% overall accuracy using the original, imbalanced data. Using oversampling techniques improved the overall accuracy up to 77%. More importantly, oversampling significantly improved the prediction of the high level effort, from 31% to around 85%. Conclusions: This paper shows the importance of tying software failures to changes made to fix all associated faults, in one or more software components and/or in one or more software artifacts, and the benefit of studying how the spread of faults and other factors affect the fix implementation effort.

The practice of pre-marketing safety assessment in drug development.

PubMed

Chuang-Stein, Christy; Xia, H Amy

2013-01-01

The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.

An ethnographic study of classifying and accounting for risk at the sharp end of medical wards.

PubMed

Dixon-Woods, Mary; Suokas, Anu; Pitchforth, Emma; Tarrant, Carolyn

2009-08-01

An understanding of how staff identify, classify, narrativise and orient to patient safety risks is important in understanding responses to efforts to effect change. We report an ethnographic study of four medical wards in the UK, in hospitals that were participating in the Health Foundation's Safer Patients Initiative, an organisation-wide patient safety programme. Data analysis of observations and 49 interviews with staff was based on the constant comparative method. We found that staff engaged routinely in practices of determining what gets to count as a risk, how such risks should properly be managed, and how to account for what they do. Staff practices and reasoning in relation to risk emerged through their practical engagement in the everyday work of the wards, but were also shaped by social imperatives. Risks, in the environment we studied, were not simply risks to patient safety; when things went wrong, professional identity was at risk too. Staff oriented to risks in the context of busy and complex ward environments, which influenced how they accounted for risk. Reasoning about risk was influenced by judgements about which values should be promoted when caring for patients, by social norms, by risk-spreading logics, and by perceptions of the extent to which particular behaviours and actions were coupled to outcomes and were blameworthy. These ways of identifying, evaluating and addressing risks are likely to be highly influential in staff responses to efforts to effect change, and highlight the challenges in designing and implementing patient safety interventions.

Industrial responses to constrained OSHA regulation. Occupational Safety and Health Administration.

PubMed

Pedersen, D H

2000-01-01

As part of the effort to reduce the size and economic impact of the federal establishment, congressional conservatives are proposing legislation to restrict the regulatory activity of the Occupational Safety and Health Administration (OSHA). These proposals push OSHA toward a purely consultative role, at a corresponding cost in direct regulatory capability. The Clinton administration's reinvention of government initiative is also moving OSHA toward a consultative role based on a strategy of cooperative compliance or industry self-regulation with a strong coercive foundation. Since both camps appear to agree that self-regulation can assure a safe and healthy workplace, the remaining debate concerns the extent to which coercive regulation is still needed. National survey data on the industrial provision of occupational safety and health services in the manufacturing sector were used to measure changes in industrial safety and health activity between 1972-74 and 1981-83. In conjunction with data on OSHA command-and-control regulatory activity from 1972 to 1979, these data permitted an examination of the relationship between command-and-control regulatory activities and changes in industrial behavior that could be regarded as a form of self-regulation. This analysis showed that coercive regulation by OSHA in the 1970s was significantly related to industry self-regulation efforts, although the relationship varied by industrial facility employment size and type of regulatory coercion. These results indicate that coercive regulation should be retained as an industrial incentive in any self-regulation policy paradigm. The results also provide evidence that OSHA regulatory policy should be based on anticipated differences in industrial response to various coercive measures.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

PubMed Central

Gao, Ran; Chan, Albert P.C.; Utama, Wahyudi P.; Zahoor, Hafiz

2016-01-01

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors’ expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers’ caring and communication (CCC) and coworkers’ role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry. PMID:27834823

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

PubMed

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

New Horizons Launch Contingency Effort

NASA Astrophysics Data System (ADS)

Chang, Yale; Lear, Matthew H.; McGrath, Brian E.; Heyler, Gene A.; Takashima, Naruhisa; Owings, W. Donald

2007-01-01

On 19 January 2006 at 2:00 PM EST, the NASA New Horizons spacecraft (SC) was launched from the Cape Canaveral Air Force Station (CCAFS), FL, onboard an Atlas V 551/Centaur/STAR™ 48B launch vehicle (LV) on a mission to explore the Pluto Charon planetary system and possibly other Kuiper Belt Objects. It carried a single Radioisotope Thermoelectric Generator (RTG). As part of the joint NASA/US Department of Energy (DOE) safety effort, contingency plans were prepared to address the unlikely events of launch accidents leading to a near-pad impact, a suborbital reentry, an orbital reentry, or a heliocentric orbit. As the implementing organization. The Johns Hopkins University Applied Physics Laboratory (JHU/APL) had expanded roles in the New Horizons launch contingency effort over those for the Cassini mission and Mars Exploration Rovers missions. The expanded tasks included participation in the Radiological Control Center (RADCC) at the Kennedy Space Center (KSC), preparation of contingency plans, coordination of space tracking assets, improved aerodynamics characterization of the RTG's 18 General Purpose Heat Source (GPHS) modules, and development of spacecraft and RTG reentry breakup analysis tools. Other JHU/APL tasks were prediction of the Earth impact footprints (ElFs) for the GPHS modules released during the atmospheric reentry (for purposes of notification and recovery), prediction of the time of SC reentry from a potential orbital decay, pre-launch dissemination of ballistic coefficients of various possible reentry configurations, and launch support of an Emergency Operations Center (EOC) on the JHU/APL campus. For the New Horizons launch, JHU/APL personnel at the RADCC and at the EOC were ready to implement any real-time launch contingency activities. A successful New Horizons launch and interplanetary injection precluded any further contingency actions. The New Horizons launch contingency was an interagency effort by several organizations. This paper describes JHU/APL's roles and responsibilities in the launch contingency effort, and the specific tasks to fulfill those responsibilities. The overall effort contributed to mission safety and demonstrated successful cooperation between several agencies.

Nurses' response to parents' 'speaking-up' efforts to ensure their hospitalized child's safety: an attribution theory perspective.

PubMed

Bsharat, Sondos; Drach-Zahavy, Anat

2017-09-01

To understand how attribution processes (control and stability), which the nurse attributes to parental involvement in maintaining child safety, determine the nurse's response to a safety alert. Participation of parents in maintaining their child's safety is shown to reduce the incidence of and risk of clinical errors. Unless nurses respond appropriately to parents' safety alerts, this potential source of support could diminish. A 2 (controllability: high vs. low) × 2 (consistency: high vs. low) factorial design. Data were collected during the period 2013-2014 in paediatric wards. Four variants of scenarios were created corresponding to the different combinations of these variables. A total of 126 nurses read a scenario and completed self-report questionnaires measuring their response to the parent's safety alert. Additional data were collected about the manipulation check, safety norms in the ward and demographic variables. Data were analysed using analysis of variance. Results showed a main effect of stability and a significant two-way interaction effect of stability and controllability, on a nurse's tendency to help the parent and fix the safety problem. Furthermore, safety norms were significantly related to nurses' response. These findings contribute to the understanding of antecedents that affect nurses' responses to parents' speaking-up initiatives: whether nurses will reject or heed the alert. Theoretical and practical implications for promoting parents' engagement in their safety are discussed. © 2017 John Wiley & Sons Ltd.

Undergraduate medical students' perceptions and intentions regarding patient safety during clinical clerkship.

PubMed

Lee, Hoo-Yeon; Hahm, Myung-Il; Lee, Sang Gyu

2018-04-04

The purpose of this study was to examine undergraduate medical students' perceptions and intentions regarding patient safety during clinical clerkships. Cross-sectional study administered in face-to-face interviews using modified the Medical Student Safety Attitudes and Professionalism Survey (MSSAPS) from three colleges of medicine in Korea. We assessed medical students' perceptions of the cultures ('safety', 'teamwork', and 'error disclosure'), 'behavioural intentions' concerning patient safety issues and 'overall patient safety'. Confirmatory factor analysis and Spearman's correlation analyses was performed. In total, 194(91.9%) of the 211 third-year undergraduate students participated. 78% of medical students reported that the quality of care received by patients was impacted by teamwork during clinical rotations. Regarding error disclosure, positive scores ranged from 10% to 74%. Except for one question asking whether the disclosure of medical errors was an important component of patient safety (74%), the percentages of positive scores for all the other questions were below 20%. 41.2% of medical students have intention to disclose it when they saw a medical error committed by another team member. Many students had difficulty speaking up about medical errors. Error disclosure guidelines and educational efforts aimed at developing sophisticated communication skills are needed. This study may serve as a reference for other institutions planning patient safety education in their curricula. Assessing student perceptions of safety culture can provide clerkship directors and clinical service chiefs with information that enhances the educational environment and promotes patient safety.

Waste isolation safety assessment program. Task 4. Third contractor information meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-06-01

The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less

The perceived compatibility of safety and production expectations in hazardous occupations.

PubMed

McLain, David L; Jarrell, Kimberly A

2007-01-01

Safety hazards are unavoidable in many work environments. Employees must be both productive and safe, however, conflicting safety and production demands can negatively affect safety, production, or both. The employee's perception of the compatibility of management's safety and production expectations is a possible predictor of such consequences. This paper defines "safety-production compatibility" and describes how measures of safety-production compatibility, as well as safety pressure and production pressure, were developed. We used LISREL structural equation modeling to test the influences of safety-production compatibility, safety pressure, and production pressure on safe work behavior and interference with performing other work tasks. The 239 study participants were workers employed in diverse but hazardous occupations. Pressure to work safely was positively associated with safe work behavior. The perceived compatibility of safety and production demands positively influenced safe work behavior and reduced the interference of safety hazards performing other tasks. Safety-production compatibility was also found to mediate the relationship between trust in management and safe work behavior. The results of this field study suggest increased compatibility, and thus less conflict, between safety and production demands influences safe work behavior and the interference of safety hazards with performing other work tasks. More broadly, the worker's reaction to multiple work demands is a safety and performance influence. Safety management efforts that focus only on the hazards fail to eliminate many accidents because accidents arise from many factors including technology, safety climate, social influences, production, and safety demands. This study suggests that workers differ in their perception of the compatibility of safety and production demands. These differences will show up in safe work behavior, influencing the effectiveness of safety management efforts and the trust workers have in management's concern for safety.

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: lessons learned from the use of multiple sources and mixed methods in a safety needs assessment.

PubMed

Gittleman, Janie L; Gardner, Paige C; Haile, Elizabeth; Sampson, Julie M; Cigularov, Konstantin P; Ermann, Erica D; Stafford, Pete; Chen, Peter Y

2010-06-01

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history. Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey. Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey. The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication. The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization. Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events. (c) 2010 Elsevier Ltd. All rights reserved.

Packaging Strategies for Criticality Safety for "Other" DOE Fuels in a Repository

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larry L Taylor

2004-06-01

Since 1998, there has been an ongoing effort to gain acceptance of U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in the national repository. To accomplish this goal, the fuel matrix was used as a discriminating feature to segregate fuels into nine distinct groups. From each of those groups, a characteristic fuel was selected and analyzed for criticality safety based on a proposed packaging strategy. This report identifies and quantifies the important criticality parameters for the canisterized fuels within each criticality group to: (1) demonstrate how the “other” fuels in the group are bounded by the baseline calculations ormore » (2) allow identification of individual type fuels that might require special analysis and packaging.« less

Assessment of Electrical Safety in Afghanistan

DTIC Science & Technology

2009-07-24

effectiveness of command efforts to ensure the electrical safety of Department of Defense occupied and constructed facilities in Afghanistan. We...March 31, 2009, we announced the Assessment of Electrical Safety in Afghanistan. The objective of this assessment was to review the effectiveness of...used contractors to review and identify electrical deficiencies to include life, health , and safety issues at FOBs. According to TF POWER

The Role of Labor-Management Committees in Safeguarding Worker Safety and Health.

ERIC Educational Resources Information Center

Ruttenberg, Ruth

There are thousands of labor-management committees for occupational safety and health in the United States. Most were established or activated after passage of the Occupational Safety and Health Act of 1970. Such committees can be an important tool when used as part of a comprehensive effort to achieve safety and health in the workplace. In the…

Constructing definitions of safety risks while nurses care for hospitalised older people: Secondary analysis of qualitative data.

PubMed

Dahlke, Sherry; Hall, Wendy A; Baumbusch, Jennifer

2017-09-01

The aim of this secondary qualitative descriptive analysis was to examine how nurses construct a definition of older peoples' safety risks and provide care while working within organisational contexts that are focused on diminishing patient risks. Numbers of older patients are increasing in acute hospital contexts-contexts that place their focus on patient safety. Nurses need to manage tensions between older peoples' risks, evidence-informed practice decisions, limited resources and organisational emphases on patient falls. To date, their practice dilemmas have not been well examined. A secondary qualitative descriptive analysis was conducted using data that were collected between June 2010 and May 2011 to examine nursing practice with hospitalised older people. All field notes and transcribed data were reviewed to generate themes representing 18 Registered Nurses' perceptions about safe care for hospitalised older people. The first author generated categories that described how nurses construct definitions of safety risks for older people. All authors engaged in an iterative analytic process that resulted in themes capturing nurses' efforts to provide care in limited resource environments while considering older peoples' safety risks. Nurses constructed definitions of patient safety risks in the context of institutional directives. Nurses provided care using available resources as efficiently as possible and accessing co-worker support. They also minimised the importance of older people's functional abilities by setting priorities for medically delegated tasks and immobilising their patients to reduce their risks. Nurses' definitions of patient risk, which were shaped by impoverished institutional resources and nurses' lack of valuing of functional abilities, contributed to suboptimal care for older adults. Nurses' definitions of risk as physical injury reduced their attention to patients' functional abilities, which nurses reported suffered declines as a result. Leaders need to examine how organisational emphases on particular areas of patient safety and resource constraints contribute to suboptimal care of older people. Nurses understanding of patient risk must incorporate older patients' functional abilities. © 2017 John Wiley & Sons Ltd.

CHEMICAL SAFETY ALERTS-

EPA Science Inventory

Chemical Safety Alerts are short publications which explain specific hazards that have become evident through chemical accident investigation efforts. EPA has produced over a dozen Alerts to date. This year's Alert: Managing Chemical Reactivity Hazards

Design and analysis of lifting tool assemblies to lift different engine block

NASA Astrophysics Data System (ADS)

Sawant, Arpana; Deshmukh, Nilaj N.; Chauhan, Santosh; Dabhadkar, Mandar; Deore, Rupali

2017-07-01

Engines block are required to be lifted from one place to another while they are being processed. The human effort required for this purpose is more and also the engine block may get damaged if it is not handled properly. There is a need for designing a proper lifting tool which will be able to conveniently lift the engine block and place it at the desired position without any accident and damage to the engine block. In the present study lifting tool assemblies are designed and analyzed in such way that it may lift different categories of engine blocks. The lifting tool assembly consists of lifting plate, lifting ring, cap screws and washers. A parametric model and assembly of Lifting tool is done in 3D modelling software CREO 2.0 and analysis is carried out in ANSYS Workbench 16.0. A test block of weight equivalent to that of an engine block is considered for the purpose of analysis. In the preliminary study, without washer the stresses obtained on the lifting tool were more than the safety margin. In the present design, washers were used with appropriate dimensions which helps to bring down the stresses on the lifting tool within the safety margin. Analysis is carried out to verify that tool design meets the ASME BTH-1 required safety margin.

Reprint of "Safe places for pedestrians: using cognitive work analysis to consider the relationships between the engineering and urban design of footpaths".

PubMed

Stevens, Nicholas; Salmon, Paul

2015-01-01

Footpaths provide an integral component of our urban environments and have the potential to act as safe places for people and the focus for community life. Despite this, the approach to designing footpaths that are safe while providing this sense of place often occurs in silos. There is often very little consideration given to how designing for sense of place impacts safety and vice versa. The aim of this study was to use a systems analysis and design framework to develop a design template for an 'ideal' footpath system that embodies both safety and sense of place. This was achieved through using the first phase of the Cognitive Work Analysis framework, Work Domain Analysis, to specify a model of footpaths as safe places for pedestrians. This model was subsequently used to assess two existing footpath environments to determine the extent to which they meet the design requirements specified. The findings show instances where the existing footpaths both meet and fail to meet the design requirements specified. Through utilising a systems approach for footpaths, this paper has provided a novel design template that can inform new footpath design efforts or be used to evaluate the extent to which existing footpaths achieve their safety and sense of place requirements. Copyright © 2014 Elsevier Ltd. All rights reserved.

Safe places for pedestrians: using cognitive work analysis to consider the relationships between the engineering and urban design of footpaths.

PubMed

Stevens, Nicholas; Salmon, Paul

2014-11-01

Footpaths provide an integral component of our urban environments and have the potential to act as safe places for people and the focus for community life. Despite this, the approach to designing footpaths that are safe while providing this sense of place often occurs in silos. There is often very little consideration given to how designing for sense of place impacts safety and vice versa. The aim of this study was to use a systems analysis and design framework to develop a design template for an 'ideal' footpath system that embodies both safety and sense of place. This was achieved through using the first phase of the Cognitive Work Analysis framework, Work Domain Analysis, to specify a model of footpaths as safe places for pedestrians. This model was subsequently used to assess two existing footpath environments to determine the extent to which they meet the design requirements specified. The findings show instances where the existing footpaths both meet and fail to meet the design requirements specified. Through utilising a systems approach for footpaths, this paper has provided a novel design template that can inform new footpath design efforts or be used to evaluate the extent to which existing footpaths achieve their safety and sense of place requirements. Copyright © 2014 Elsevier Ltd. All rights reserved.

The safety of 17a-Methyltestosterone medicated feed to tilapia

USDA-ARS?s Scientific Manuscript database

17a-Methyltestosterone (17MT) is used in U.S. aquaculture under an Investigational New Animal Drug exemption to produce male populations of tilapia. Efforts to gain FDA-approval include this Target Animal Safety study. A study was designed to determine its histological safety to tilapia when fed a...

Optical sensing technologies for rapid food safety and quality inspection

USDA-ARS?s Scientific Manuscript database

Public concerns for food safety and foodborne illness have risen in recent years. There is a need to expand efforts to prevent and mitigate any food contamination that can potentially be harmful to human health. Researchers at the Environmental Microbial and Food Safety Laboratory, ARS, USDA is one...

Safety, Dignity and the Quest for a Democratic Campus Culture

ERIC Educational Resources Information Center

Ben-Porath, Sigal

2016-01-01

In his excellent paper, Callan (2016) differentiates intellectual safety, which fosters smugness, indifference and lack of effort, from dignity safety, which is needed for participation, learning and engagement. He suggests that college classrooms that reject the first and espouse the second would be ones that focus on "cultivating…

Educational Alternatives for Boating Safety Programs. Final Report.

ERIC Educational Resources Information Center

Sager, E.; And Others

The Coast Guard, in efforts to improve the safety of recreational boating, undertook research to identify educational alternatives in boating safety programs. Background research was done to assess materials from areas of boating education and education in comparable recreational areas. Research was also conducted to review educational and mass…

Two low-cost safety concepts for two-way STOP-controlled, rural intersections on high-speed two-lane, two-way roadways.

DOT National Transportation Integrated Search

2008-09-01

The Federal Highway Administration (FHWA) Office of Safety has identified intersections as one of its safety focus areas. As part of the FHWA efforts to reduce intersection crashes and the related injuries and fatalities, two concepts have been ident...

Safety evaluation of installing center two-way left-turn lanes on two-lane roads

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration organized a Pooled Fund Study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was the installation of c...

1001518

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001519

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001520

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001521

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tenney, J.L.

SARS is a data acquisition system designed to gather and process radar data from aircraft flights. A database of flight trajectories has been developed for Albuquerque, NM, and Amarillo, TX. The data is used for safety analysis and risk assessment reports. To support this database effort, Sandia developed a collection of hardware and software tools to collect and post process the aircraft radar data. This document describes the data reduction tools which comprise the SARS, and maintenance procedures for the hardware and software system.

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE PAGES

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.; ...

2017-08-02

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

A 3S Risk ?3SR? Assessment Approach for Nuclear Power: Safety Security and Safeguards.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forrest, Robert; Reinhardt, Jason Christian; Wheeler, Timothy A.

Safety-focused risk analysis and assessment approaches struggle to adequately include malicious, deliberate acts against the nuclear power industry's fissile and waste material, infrastructure, and facilities. Further, existing methods do not adequately address non- proliferation issues. Treating safety, security, and safeguards concerns independently is inefficient because, at best, it may not take explicit advantage of measures that provide benefits against multiple risk domains, and, at worst, it may lead to implementations that increase overall risk due to incompatibilities. What is needed is an integrated safety, security and safeguards risk (or "3SR") framework for describing and assessing nuclear power risks that canmore » enable direct trade-offs and interactions in order to inform risk management processes -- a potential paradigm shift in risk analysis and management. These proceedings of the Sandia ePRA Workshop (held August 22-23, 2017) are an attempt to begin the discussions and deliberations to extend and augment safety focused risk assessment approaches to include security concerns and begin moving towards a 3S Risk approach. Safeguards concerns were not included in this initial workshop and are left to future efforts. This workshop focused on four themes in order to begin building out a the safety and security portions of the 3S Risk toolkit: 1. Historical Approaches and Tools 2. Current Challenges 3. Modern Approaches 4. Paths Forward and Next Steps This report is organized along the four areas described above, and concludes with a summary of key points. 2 Contact: rforres@sandia.gov; +1 (925) 294-2728« less

[Towards a safety culture in the neonatal unit: Six years experience].

PubMed

Esqué Ruiz, M T; Moretones Suñol, M G; Rodríguez Miguélez, J M; Parés Tercero, S; Cortés Albuixech, R; Varón Ramírez, E M; Figueras Aloy, J

2015-10-01

A safety culture is the collective effort of an institution to direct its resources toward the goal of safety. An analysis is performed on the six years of experience of the Committee on the Safety of Neonatal Patient. A mailbox was created for the declaration of adverse events, and measures for their correction were devised, such as case studies, continuous education, prevention of nosocomial infections, as well as information on the work done and its assessment. A total of 1287 reports of adverse events were received during the six years, of which 600 (50.8%) occurred in the neonatal ICU, with 15 (1.2%) contributing to death, and 1282 (99.6%) considered preventable. Simple corrective measures (notification, security alerts, etc.) were applied in 559 (43.4%), intermediate measures (protocols, monthly newsletter, etc.) in 692 (53.8%), and more complex measures (causal analysis, scripts, continuous education seminars, prospective studies, etc.) in 66 (5.1%). As regards nosocomial infections, the prevention strategies implemented (hand washing, insertion and maintenance of catheters) directly affected their improvement. Two surveys were conducted to determine the level of satisfaction with the Committee on the Safety of Neonatal Patient. A rating 7.5/10 was obtained in the local survey, while using the Spanish version of the Hospital Survey on Patient Safety Culture the rate was 7.26/10. A path to a culture of safety has been successfully started and carried out. Reporting the adverse events is the key to obtaining information on their nature, etiology and evolution, and to undertake possible prevention strategies. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

Towards patient safety in anaesthesia.

PubMed

Cooper, J B

1994-07-01

The anaesthesia specialty has focused on the safety of the patient and examination of untoward outcomes. Serious injuries are now rare in medically advanced countries. Still, anaesthesia deaths and complications are important because the anaesthetic itself has no intended therapeutic effect. Safety is a never-ending battle that requires continued effort because many forces have the potential to diminish whatever progress is made. This paper describes the modern movement in anaesthesia patient safety--the reasons it started, the major foci and explanations for why anaesthesia seems now to be safer than at any time in history. The American legal system, critical incident studies, studies of malpractice claims and large-scale studies of anaesthesia outcomes played a role in increasing the awareness of the need to enhance anaesthesia safety. Many efforts are believed to have contributed to improvements in the safety of anaesthesia: improved training of anaesthesia clinicians, new pharmaceuticals, new technologies for monitoring (especially pulse oximetry and capnography), standards for monitoring and other aspects of anaesthesia care, safety enhancements in anaesthesia equipment and the implementation of quality assurance and risk management programmes. The creation of the Anesthesia Patient Safety Foundation in the United States and a similar organization in Australia have helped to bring about awareness of safety issues and to support study of patient safety. Ultimately, the motto of the Anesthesia Patient Safety Foundation should be the goal of all anaesthesia professionals: "That no patient shall be harmed by anaesthesia".

Processes of technology assessment: The National Transportation Safety Board

NASA Technical Reports Server (NTRS)

Weiss, E.

1972-01-01

The functions and operations of the Safety Board as related to technology assessment are described, and a brief history of the Safety Board is given. Recommendations made for safety in all areas of transportation and the actions taken are listed. Although accident investigation is an important aspect of NTSB's activity, it is felt that the greatest contribution is in pressing for development of better accident prevention programs. Efforts of the Safety Board in changing transportation technology to improve safety and prevent accidents are illustrated.

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea.

PubMed

Choi, Gi Heung; Loh, Byoung Gook

2017-06-01

Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

Safety Tips.

ERIC Educational Resources Information Center

Nagel, Miriam C., Ed.

1984-01-01

Outlines a cooperative effort in Iowa to eliminate dangerous or unwanted chemicals from school science storerooms. Also reviews the Council of State Science Supervisor's safety program and discusses how to prevent cuts and punctures from jagged glass tubing. (JN)

Implementing local agency safety management

DOT National Transportation Integrated Search

2003-12-17

For local agencies to mount a successful effort toward reducing motor vehicle collisions and their costs, an effective systematic approach must be taken. A Safety Management System (SMS) has two basic components: a collaborative information exchange ...

Human factors aspects of lightplane safety.

DOT National Transportation Integrated Search

1963-12-01

This paper attempts to relate aircraft accident investigation and aeromedical research efforts for the purpose of clarifying research needs. Such efforts ultimately can lead to a reduction on lightplane accidents, injuries, and fatalities. Recent sta...

Improving Safety through Human Factors Engineering.

PubMed

Siewert, Bettina; Hochman, Mary G

2015-10-01

Human factors engineering (HFE) focuses on the design and analysis of interactive systems that involve people, technical equipment, and work environment. HFE is informed by knowledge of human characteristics. It complements existing patient safety efforts by specifically taking into consideration that, as humans, frontline staff will inevitably make mistakes. Therefore, the systems with which they interact should be designed for the anticipation and mitigation of human errors. The goal of HFE is to optimize the interaction of humans with their work environment and technical equipment to maximize safety and efficiency. Special safeguards include usability testing, standardization of processes, and use of checklists and forcing functions. However, the effectiveness of the safety program and resiliency of the organization depend on timely reporting of all safety events independent of patient harm, including perceived potential risks, bad outcomes that occur even when proper protocols have been followed, and episodes of "improvisation" when formal guidelines are found not to exist. Therefore, an institution must adopt a robust culture of safety, where the focus is shifted from blaming individuals for errors to preventing future errors, and where barriers to speaking up-including barriers introduced by steep authority gradients-are minimized. This requires creation of formal guidelines to address safety concerns, establishment of unified teams with open communication and shared responsibility for patient safety, and education of managers and senior physicians to perceive the reporting of safety concerns as a benefit rather than a threat. © RSNA, 2015.

John M. Eisenberg Patient Safety Awards. System innovation: Veterans Health Administration National Center for Patient Safety.

PubMed

Heget, Jeffrey R; Bagian, James P; Lee, Caryl Z; Gosbee, John W

2002-12-01

In 1998 the Veterans Health Administration (VHA) created the National Center for Patient Safety (NCPS) to lead the effort to reduce adverse events and close calls systemwide. NCPS's aim is to foster a culture of safety in the Department of Veterans Affairs (VA) by developing and providing patient safety programs and delivering standardized tools, methods, and initiatives to the 163 VA facilities. To create a system-oriented approach to patient safety, NCPS looked for models in fields such as aviation, nuclear power, human factors, and safety engineering. Core concepts included a non-punitive approach to patient safety activities that emphasizes systems-based learning, the active seeking out of close calls, which are viewed as opportunities for learning and investigation, and the use of interdisciplinary teams to investigate close calls and adverse events through a root cause analysis (RCA) process. Participation by VA facilities and networks was voluntary. NCPS has always aimed to develop a program that would be applicable both within the VA and beyond. NCPS's full patient safety program was tested and implemented throughout the VA system from November 1999 to August 2000. Program components included an RCA system for use by caregivers at the front line, a system for the aggregate review of RCA results, information systems software, alerts and advisories, and cognitive acids. Following program implementation, NCPS saw a 900-fold increase in reporting of close calls of high-priority events, reflecting the level of commitment to the program by VHA leaders and staff.

Health and safety implications of occupational exposure to engineered nanomaterials.

PubMed

Stebounova, Larissa V; Morgan, Hallie; Grassian, Vicki H; Brenner, Sara

2012-01-01

The rapid growth and commercialization of nanotechnology are currently outpacing health and safety recommendations for engineered nanomaterials. As the production and use of nanomaterials increase, so does the possibility that there will be exposure of workers and the public to these materials. This review provides a summary of current research and regulatory efforts related to occupational exposure and medical surveillance for the nanotechnology workforce, focusing on the most prevalent industrial nanomaterials currently moving through the research, development, and manufacturing pipelines. Their applications and usage precedes a discussion of occupational health and safety efforts, including exposure assessment, occupational health surveillance, and regulatory considerations for these nanomaterials. Copyright © 2011 Wiley Periodicals, Inc.

Time-related degradation, a key issue in nuclear plant safety evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonzon, L.L.; Bustard, L.D.; Clough, R.L.

1982-01-01

Sandia National Laboratories is conducting a number of programs under NRC sponsorship which deal with safety-related equipment qualification issues, including the important aspect of aging. Among these is the Qualification Testing Evaluation (QTE) program which was probably the first to devote significant effort towards aging research and was one of the primary motivators leading to the Workshop. The thrust of the QTE aging efforts has been on elastomeric materials, typically used in electrical cables, seals, gaskets, and the like; currently, efforts are being pursued on plant ambient environments measurements, aging of electronics, and aging of motors. A brief status reportmore » is presented in this paper.« less

Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

1989-04-01

This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespreadmore » availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.« less

78 FR 60218 - Safety Zone; Old Mormon Slough, Stockton, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

... decontaminate soil, groundwater, and sediment in Old Mormon Slough and the surrounding basin. This safety zone... safety zone in Old Mormon Slough to further the efforts of the EPA to rehabilitate soil, sediment, and... water collection ponds. The unlined oily waste ponds were closed in 1981. Sampling has shown that soils...

78 FR 34258 - Safety Zone; Salvage Operations at Marseilles Dam; Illinois River

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

...-AA00 Safety Zone; Salvage Operations at Marseilles Dam; Illinois River AGENCY: Coast Guard, DHS. ACTION... Illinois River starting at Mile Marker 246.9 and extending 600 yards upstream of the Marseilles Dam to Mile... repair efforts at the Marseilles Dam. This safety zone is necessary to protect the general public...

GAO’s Views on DOE’s 1991 Budget for Addressing Problems at the Nuclear Weapons Complex

DTIC Science & Technology

1990-03-02

management, and efforts by DOE to make its contractors more accountable. Also, the Defense Nuclear Facilities Safety Board mandated by the Congress became...and safety matters. 6 Finally, the Defense Nuclear Facilities Safety Board was established. Although not a DOE action, its establishment, nevertheless

Oklahoma Curriculum Guide for Teaching Safety Education.

ERIC Educational Resources Information Center

Oklahoma Curriculum Improvement Commission, Oklahoma City.

Developed by classroom teachers, university professors, and personnel from the Oklahoma State Department of Education, this guide is an effort to assist teachers in locating and utilizing safety materials as well as to assist them in developing well-balanced safety programs for the children and young people in the state. The preschool and…

75 FR 8137 - Coordination and Strategic Planning of the Federal Effort Against Intellectual Property...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... jobs. In addition, the IPEC seeks written submissions identifying threats to public health and safety... resulting from intellectual property violations, and the threats to public health and safety created by... violations, and the threats to public health and safety created by infringement. Thus, the IPEC seeks written...

What Can Students Learn about Lab Safety from Mr. Bean?

ERIC Educational Resources Information Center

Carr, Jeremy M.; Carr, June M.

2016-01-01

Chemical laboratory safety education is often synonymous with boring, dry, drawn-out lectures. In an effort to challenge this norm and stimulate vivid learning opportunities about laboratory safety, college chemistry classes analyzed a short, humorous video clip of a character, named Mr. Bean, who visits a chemistry laboratory and commits several…

Efforts to update firefighter safety zone guidelines

Treesearch

Bret Butler

2009-01-01

One of the most critical decisions made on wildland fires is the identification of suitable safety zones for firefighters during daily fire management operations. To be effective (timely, repeatable, and accurate), these decisions rely on good training and judgment, but also on clear, concise guidelines. This article is a summary of safety zone guidelines and the...

Model Transformation for a System of Systems Dependability Safety Case

NASA Technical Reports Server (NTRS)

Murphy, Judy; Driskell, Steve

2011-01-01

The presentation reviews the dependability and safety effort of NASA's Independent Verification and Validation Facility. Topics include: safety engineering process, applications to non-space environment, Phase I overview, process creation, sample SRM artifact, Phase I end result, Phase II model transformation, fault management, and applying Phase II to individual projects.

Occupational Safety and Health Practices: An Alarming Call to Action

ERIC Educational Resources Information Center

Threeton, Mark D.; Evanoski, Danielle C.

2014-01-01

In an effort to provide additional insight on providing a secure teaching and learning environment within schools, this study sought to: (1) explore the safety and health practices within Career and Technical Education (CTE); and (2) identify the perceived obstacles which appear to hinder implementation of health and safety programs. While it…

WRRSP: Wyoming rural road safety program.

DOT National Transportation Integrated Search

2009-05-01

SAFETEA-LU contains language indicating that State Department of Transportations (DOTs) will be required to address : safety on local and rural roads. The Wyoming Local Technical Assistant Program (LTAP) coordinated an effort in cooperation with the ...

ITS logical architecture : volume 3, data dictionary.

DOT National Transportation Integrated Search

1981-01-01

The objective of the research effort was to develop an empirically and experiencially based model pedestrian safety program which cities can use as guidelines for pedestrian safety program planning, implementation, and evaluation. The basis of these ...

78 FR 46588 - Solicitation of Written Comments on the Global Immunizations Working Group's Draft Report and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... Vaccine Safety Monitoring and Post-Marketing Surveillance 4. Building Global Immunization Research and... activities not represented in the report where HHS efforts can offer a comparative advantage or where HHS... global immunization efforts and the role of HHS in enhancing those efforts. Examples of potential...

Developing an Oregon access management best practices manual.

DOT National Transportation Integrated Search

2013-02-01

This Report reviews an Oregon research effort to develop an Oregon Access Management Best Practices Manual. In particular, this research effort develops a resource to help transportation professionals quantify safety and operational effects of variou...

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

NASA Technical Reports Server (NTRS)

Sawyer, J. C., Jr.

1993-01-01

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

The value of bedside shift reporting enhancing nurse surveillance, accountability, and patient safety.

PubMed

Jeffs, Lianne; Acott, Ashley; Simpson, Elisa; Campbell, Heather; Irwin, Terri; Lo, Joyce; Beswick, Susan; Cardoso, Roberta

2013-01-01

A study was undertaken to explore nurses' experiences and perceptions associated with implementation of bedside nurse-to-nurse shift handoff reporting. Interviews were conducted with nurses and analyzed using directed content analysis. Two themes emerged that illustrated the value of bedside shift reporting. These themes included clarifying information and intercepting errors and visualizing patients and prioritizing care. Nurse leaders can leverage study findings in their efforts to embed nurse-to-nurse bedside shift reporting in their respective organizations.

Symbolic Interactionism: A Framework for Understanding Risk-Taking Behaviors in Farm Communities.

PubMed

Sorensen, Julie A; Tinc, Pamela J; Weil, Rebecca; Droullard, David

2017-01-01

Risk behaviors are key drivers of occupationally related injuries and illnesses, considerably impacting the uptake and success of injury interventions, technologies, and practices. This is certainly true in the agricultural sector, where farmers often ignore recommended safety practices or have even been known to disable safety technologies. Although research studies have characterized specific individual safety or risk behaviors, few studies have thoroughly examined farmers' risk and safety orientations or how these develop in response to environmental and societal exposures. This study utilizes data collected over the past decade with a variety of small to midsize farm personnel to explore the meanings that farmers ascribe to risk and safety and how these influence risk and safety behaviors. In all, over 90 interviews with farmers, farm-wives, and family members were reviewed. Researchers used a grounded theory approach to identify patterns of environmental and societal exposures, as well as their impact on farmers' risk and safety orientations. Analysis revealed exposures and orientations to risk and safety, which could be largely explained through the lens of symbolic interactionism. This framework posits that people create a sense-of-self as a way of adjusting and adapting to their environment. For farmers in this study, belief in their ability to persevere allows them to succeed, despite the considerable stressors and challenges they face each day. However, this identity can, at times, be maladaptive when it is applied to safety decisions and hazard exposures. The authors discuss the implications of this research and how it may be used to productively inform future farm safety efforts.

Patient safety climate in general public hospitals in China: differences associated with department and job type based on a cross-sectional survey.

PubMed

Zhou, Ping; Bai, Fei; Tang, Hui-Qin; Bai, Jie; Li, Min-Qi; Xue, Di

2018-04-17

This study analysed differences in the perceived patient safety climate among different working departments and job types in public general hospitals in China. Cross-sectional survey. Eighteen tertiary hospitals and 36 secondary hospitals from 10 areas in Shanghai, Hubei Province and Gansu Province, China. Overall, 4753 staff, including physicians, nurses, medical technicians and managers, were recruited from March to June 2015. The Patient Safety Climate in Healthcare Organisations (PSCHO) tool and the percentages of 'problematic responses' (PPRs) were used as outcome measures. Multivariable two-level random intercept models were applied in the analysis. A total of 4121 valid questionnaires were collected. Perceptions regarding the patient safety climate varied among departments and job types. Physicians responded with relatively more negative evaluations of 'organisational resources for safety', 'unit recognition and support for safety efforts', 'psychological safety', 'problem responsiveness' and overall safety climate. Paediatrics departments, intensive care units, emergency departments and clinical auxiliary departments require more attention. The PPRs for 'fear of blame and punishment' were universally significantly high, and the PPRs for 'fear of shame' and 'provision of safe care' were remarkably high, especially in some departments. Departmental differences across all dimensions and the overall safety climate primarily depended on job type. The differences suggest that strategies and measures for improving the patient safety climate should be tailored by working department and job type. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Achieving a climate for patient safety by focusing on relationships.

PubMed

Manojlovich, Milisa; Kerr, Mickey; Davies, Barbara; Squires, Janet; Mallick, Ranjeeta; Rodger, Ginette L

2014-12-01

Despite many initiatives, advances in patient safety remain uneven in part because poor relationships among health professionals have not been addressed. The purpose of this study was to determine whether relationships between health professionals contributed to a patient safety climate, after implementation of an intervention to improve inter-professional collaboration. This was a secondary analysis of data collected to evaluate the Interprofessional Model of Patient Care (IPMPC) at The Ottawa Hospital in Ontario, Canada, which consists of five sites. A series of generalized estimating equation models were generated, accounting for the clustering of responses by site. Thirteen health professionals including physicians, nurses, physiotherapists and others (n = 1896) completed anonymous surveys about 1 year after the IPMPC was introduced. The IPMPC was implemented to improve interdisciplinary collaboration. Reliable instruments were used to measure collaboration, respect, inter-professional conflict and patient safety climate. Collaboration (β = 0.13; P = 0.002) and respect (β = 1.07; P = 0.03) were significant independent predictors of patient safety climate. Conflict was an independent and significant inverse predictor of patient safety climate (β = -0.29; P = 0.03), but did not moderate linkages between collaboration and patient safety climate or between respect and patient safety climate. Through the IPMPC, all health professionals learned how to collaborate and build a patient safety climate, even in the presence of inter-professional conflict. Efforts by others to foster better work relationships may yield similar improvements in patient safety climate. © The Author 2014. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Indonesian Sea Accident Analysis (Case Study From 2003 – 2013)

NASA Astrophysics Data System (ADS)

Arya Dewanto, Y.; Faturachman, D.

2018-03-01

There are so many accidents in sea transportation in Indonesia. Most of the accidents happen because of low concern aspects of the safety and security of the crew. In sailing, a man as transport users to interact with the ship and the surrounding environment (including other ships, cruise lines, ports, and the situation of local conditions). These interactions are sometimes very complex and related to various aspects of. Aware of the multiplicity of aspects related to the third of these factors, seeking the safety of cruise through a reduction in the number of accidents and the risk of death and serious injuries due to accidents and goods transported is certainly not enough attempted through mono-sector approach, but rather takes a multi-sector approach to the efforts. In this paper, we described the Indonesian Sea Transportation accident analysis for eleven years divided into four items: total of ship accident type, ship accident factor, total of casualties, region of ship accidents. All data founded from Marine Court (Mahkamah Pelayaran). From that 4 items we can find Indonesia Sea Accident Analysis from 2003-2013.

Leadership and Funding: Changes Ahead for Agricultural Safety and Health.

PubMed

Murphy, Dennis J; Lee, Barbara C

2018-01-01

For the last several decades, financial support for agricultural safety and health programs and professionals has primarily been covered by public dollars through federal and state government grant programs and appropriations. This federal and state funding provided a tremendous boost to farm safety and health professionals and program efforts for 30+ years and has provided the foundation and structure for current agricultural safety and health efforts and activities. However, there is reason to question long-term sustainability of a sufficient level of federal and state dollars for agricultural safety and health. Public funding for agricultural safety and health has never quite kept up to inflation, but even more ominous is that the entire agricultural safety and health program has been proposed for elimination each year by the White House budget beginning with the fiscal year 2012. It seems prudent, perhaps even imperative, for the agricultural safety and health community to find alternative support mechanisms. We suggest that now is a great time for agricultural businesses, services, and organizations to step up their financial support. Fortunately, several positive examples have recently surfaced within the agricultural community. As the agricultural industry continues to be a dominant enterprise in the United States, the integration of significant funding and the role of leadership from within the industry must continue to expand.

Patient safety in thoracic surgery and European Society of Thoracic Surgeons checklist.

PubMed

Novoa, Nuria M

2015-04-01

Improving patient safety seems to be a new interesting clinical subject but, in fact, it is no new. It has to do with one of the oldest ethical principles of our profession: curing and not harming. The important research that has been done in a short period of time has brought in new insight to this complex area that is fast developing. The creation of safety managing systems will allow coordinating efforts from very different, although complementary, areas to create real safety culture and safety climate in every organization. In the surgical settings, teamwork is basic to provide good quality of care. Safety leaders in every team have an important role in establishing priorities, summarizing proposals, coordinating efforts, launching new initiatives and transmitting that safety efforts are worth taken. Preparedness and anticipation are key points for avoiding most of the diverse types of patient harm that can occur. As has been published, a great number of errors can be avoided simply using crosscheck based on specialized checklist that reviews every important detail of the procedure. This strategy has been demonstrated very useful at other high risk industries such as aviation, nuclear or food management. The Safe Surgery Saves Lives program launched in 2002 by the WHO has taught us that improvement is possible using a simple checklist. More complex and detail checklist can be more adequate for more complex procedures and settings. The proposed ESTS checklist reviews different areas of possible error in deeper detail allowing the finest adjustment of the patient before the skin incision. It has been recently released to the general thoracic community and monitors its use and usefulness has to be warrantied.

Comparative Case Studies Of Corridor Safety Improvement Efforts

DOT National Transportation Integrated Search

1999-12-01

In 1988, following a series of fatal crashes on U.S. Route 322, Pennsylvania's governor directed Pennsylvania's secretary of transportation to develop immediate, short-term measures to improve safety on the roadway. In response, the Pennsylvania Depa...

In-Vehicle Safety Advisory And Warning System (Ivsaws), Volume I: Executive Summary

DOT National Transportation Integrated Search

1996-03-01

THE INVEHICLE SAFETY ADVISORY AND WARNING SYSTEM (IVSAWS) IS A FEDERAL HIGHWAY ADMINISTRATION EFFORT TO DEVELOP A NATIONWIDE VEHICULAR INFORMATION SYSTEM THAT PROVIDES DRIVERS WITH ADVANCE, SUPPLEMENTAL NOTIFICATION OF DANGEROUS ROAD CONDITIONS USING...

Drugs and highway safety 1980

DOT National Transportation Integrated Search

1980-05-01

This report presents findings of a study to describe (1) present knowledge about the relationship between drug use by drivers and highway safety, and (2) efforts to detect and prevent drug-impaired driving. Past, ongoing, and planned activities at fe...

Weather and Climate Impacts on Commercial Motor Vehicle Safety

DOT National Transportation Integrated Search

2011-04-01

The Federal Motor Carrier Safety Administration (FMCSA) has an interest in how adverse weather may influence trucking industry practices, and what climate change might mean for future FMCSA efforts to reduce weather-related crashes. Weather condition...

Safety issues with herbal products.

PubMed

Marrone, C M

1999-12-01

To review safety issues associated with the use of herbal products. Literature accessed through MEDLINE and other Internet search engines. Key search terms included herbs, dietary supplements, and safety. A misconception exists among consumers that herbal remedies are safe because they are natural. In an effort to provide healthcare practitioners with information necessary for a patient discussion, a review of safety concerns with herbal products was conducted. Several safety concerns exist with herbal products including lack of safety data, absence of quality-control requirements for potency and purity, and lenient labeling standards.

The power of collaboration with patient safety programs: building safe passage for patients, nurses, and clinical staff.

PubMed

Kerfoot, Karlene M; Rapala, Kathryn; Ebright, Patricia; Rogers, Suzanne M

2006-12-01

Patient safety is a relatively new field, with many opinions and few effectively proven approaches. One factor is clear: optimal patient safety outcomes cannot be achieved in isolation. Although it is well recognized that multidisciplinary collaboration in the healthcare setting is necessary to effect patient safety, collaboration with resources external to healthcare-academia and industry in particular-will not only aid but also quicken the patient safety efforts. The authors outline a healthcare system's use of all available resources to build a patient safety program.

Codex Alimentarius: food quality and safety standards for international trade.

PubMed

Randell, A W; Whitehead, A J

1997-08-01

Since 1962, the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organisation/World Health Organisation has been responsible for developing standards, guidelines and other recommendations on the quality and safety of food to protect the health of consumers and to ensure fair practices in food trade. The mission of the CAC remains relevant, but a number of factors have shown the need for new techniques to form the basis of food standards, the most important of which is risk analysis. The authors give a brief description of the role and work of the CAC and the efforts deployed by the Commission to respond to the challenges posed by new approaches to government regulation, harmonisation of national requirements based on international standards and the role of civil society.

Driver Performance Problems of Intercity Bus Public Transportation Safety in Indonesia

NASA Astrophysics Data System (ADS)

Suraji, A.; Harnen, S.; Wicaksono, A.; Djakfar, L.

2017-11-01

The risk of an inter-city bus public accident can be influenced by various factors such as the driver’s performance. Therefore, knowing the various influential factors related to driver’s performance is very necessary as an effort to realize road traffic safety. This study aims to determine the factors that fall on the accident associated with the driver’s performance and make mathematical modeling factors that affect the accident. Methods of data retrieval were obtained from NTSC secondary data. The data was processed by identifying factors that cause the accident. Furthermore data processing and analysis used the PCA method to obtain mathematical modeling of factors influencing the inter-city bus accidents. The results showed that the main factors that cause accidents are health, discipline, and driver competence.

Transforming primary care in the New Orleans safety-net: the patient experience.

PubMed

Schmidt, Laura A; Rittenhouse, Diane R; Wu, Kevin J; Wiley, James A

2013-02-01

The patient-centered medical home (PCMH) is a key service delivery innovation in health reform. However, there are growing questions about whether the changes in clinics promoted by the PCMH model lead to improvements in the patient experience. To test the hypothesis that PCMH improvements in safety-net primary care clinics are associated with a more positive patient experience. Multilevel cross-sectional analysis of patients nested within the primary care clinics that serve them. Primary care clinic leaders and patients throughout the City of New Orleans health care safety-net. Dependent variables included patient ratings of accessibility, coordination, and confidence in the quality/safety of care. The key independent variable was a score measuring PCMH structural and process improvements at the clinic level. Approximately two thirds of patients in New Orleans gave positive ratings to their clinics on access and quality/safety, but only one third did for care coordination. In all but the largest clinics, patient experiences of care coordination were positively associated with the clinic's use of PCMH structural and process changes. Results for patient ratings of access and quality/safety were mixed. Among primary care clinics in the New Orleans safety-net, use of more PCMH improvements at the clinic level led to more positive patient rating of care coordination, but not of accessibility or confidence in quality/safety. Ongoing efforts to pilot, demonstrate, implement, and evaluate the PCMH should consider how the impact of medical practice transformation could vary across different aspects of the patient experience.

Summaries of BFRL fire research in-house projects and grants, 1993

NASA Astrophysics Data System (ADS)

Jason, Nora H.

1993-09-01

The report describes the fire research projects performed in the Building and Fire Research Laboratory (BFRL) and under its extramural grants program during fiscal year 1993. The BFRL Fire Research Program has directed its efforts under three program thrusts. The in-house priority projects, grants, and externally-funded efforts thus form an integrated, focussed ensemble. The publication is organized along those lines: fire risk and hazard prediction - carbon monoxide prediction, turbulent combustion, soot, engineering analysis, fire hazard assessment, and large fires; fire safety of products and materials - materials combustion, furniture flammability, and wall and ceiling fires; and advanced technologies for fire sensing and control - fire detection and fire suppression. For the convenience of the reader, an alphabetical listing of all grants is contained in Part 2.0.

76 FR 11334 - Safety Zone; Soil Sampling; Chicago River, Chicago, IL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...-AA00 Safety Zone; Soil Sampling; Chicago River, Chicago, IL AGENCY: Coast Guard, DHS. ACTION: Temporary... North Branch of the Chicago River due to soil sampling in this area. This temporary safety zone is... soil sampling efforts. DATES: This rule is effective from 7 a.m. on March 1, 2011, until 5 p.m. on...

History of Playground Safety in America.

ERIC Educational Resources Information Center

Frost, Joe L.

The history of playground safety standards since the 1890s is reviewed and the lack of improvements in safety made since that time is demonstrated. The first formal effort to develop standards for playground apparatus was made by the National Recreation Association (NRA) in 1929. A major concern in this and a 1938 NRA report was the choice of safe…

Crash Testing in the Lab: Putting a New Stop to the CO2 Car!

ERIC Educational Resources Information Center

Decker, Rob

2005-01-01

Every year in the United States, the federal government, insurance companies and automobile manufacturers wreck hundreds of cars for safety-testing purposes. All this crashing comes in an effort to rate vehicular safety for the public. Inspired by numerous movies with car chases, dramatic wrecks and television commercials showing car safety tests,…

Advanced missions safety. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1972-01-01

Three separate studies were performed under the general category of advanced missions safety. Each dealt with a separate issue, was a self-contained effort, and was independent of the other two studies. The studies are titled: (1) space shuttle rescue capability, (2) experiment safety, and (3) emergency crew transfer. A separate discussion of each study is presented.

Planning for Safety on the Jobsite. Safety in Industry, Construction Industry Series.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

Work injuries and their monetary losses in the construction industry can be effectively prevented only through an aggressive and well-planned safety effort. The purpose of this bulletin is to provide guidelines to aid the construction contractor in complying with legal requirements and in attaining the objective of keeping costly accidents and…

[Healthcare-Associated Infection Control with Awareness of Patient Safety].

PubMed

Murakami, Nobuo

2016-03-01

In order to provide safe and secure medical care for patients, health care-associated infections (HAI) must not occur. HAI should be considered as incidents, and countermeasures should be viewed as a patient safety management itself. Healthcare-associated infection control (HAIC) is practiced by the infection control team (ICT), which is based on multidisciplinary cooperation. Team members have to recognize that it is the most important to make use of the expertise of each discipline. In addition, all members must try to respond quickly, to help the clinic staff. Visualized rapid information provision and sharing, environmental improvement, outbreak factor analysis, hand hygiene compliance rate improvement, proper antibiotic use (Antimicrobial Stewardship Program: ASP), and regional cooperation & leadership comprise the role of the ICT in the flagship hospital. Regarding this role, we present our hospital's efforts and the outcomes. In conclusion, for medical practice quality improvement, healthcare-associated infection control should be conducted thoroughly along with an awareness of patient safety.

Undocumented Status as a Social Determinant of Occupational Safety and Health: The Workers’ Perspective

PubMed Central

Flynn, Michael A.; Eggerth, Donald E.; Jacobson, C. Jeffrey

2015-01-01

Background Undocumented immigration to the United States has grown dramatically over the past 25 years. This study explores undocumented status as a social determinant of occupational health by examining its perceived consequences on workplace safety of Latino immigrants. Methods Guided by the Theory of Work Adjustment, qualitative analysis was conducted on transcripts from focus groups and individual interviews conducted with a convenience sample of Latino immigrant workers. Results Participants reported that unauthorized status negatively impacted their safety at work and resulted in a degree of alienation that exceeded the specific proscriptions of the law. Participants overwhelming used a strategy of disengagement to cope with the challenges they face as undocumented immigrants. Conclusion This study describes the complex web of consequences resulting from undocumented status and its impact on occupational health. This study presents a framework connecting the daily work experiences of immigrants, the coping strategy of disengagement, and efforts to minimize the impact of structural violence. PMID:26471878

Utilization of sonar technology and microcontroller towards reducing aviation hazards during ground handling of aircraft

NASA Astrophysics Data System (ADS)

Khanam, Mosammat Samia; Biswas, Debasish; Rashid, Mohsina; Salam, Md Abdus

2017-12-01

Safety is one of the most important factors in the field of aviation. Though, modern aircraft are equipped with many instruments/devices to enhance the flight safety but it is seen that accidents/incidents are never reduced to zero. Analysis of the statistical summary of Commercial Jet Airplane accidents highlights that fatal accidents that occurred worldwide from 2006 through 2015 is 11% during taxing, loading/unloading, parking and towing. Human, handling the aircrafts is one of the most important links in aircraft maintenance and hence play a significant role in aviation safety. Effort has been made in this paper to obviate human error in aviation and outline an affordable system that monitors the uneven surface &obstacles for safe "towing in" and "towing out" of an aircraft by the ground crew. The system revolves around implementation of sonar technology by microcontroller. Ultrasonic sensors can be installed on aircraft wings and tail section to identify the uneven surface &obstacles ahead and provide early warning to the maintenance ground crews.

DNA microarray technology in nutraceutical and food safety.

PubMed

Liu-Stratton, Yiwen; Roy, Sashwati; Sen, Chandan K

2004-04-15

The quality and quantity of diet is a key determinant of health and disease. Molecular diagnostics may play a key role in food safety related to genetically modified foods, food-borne pathogens and novel nutraceuticals. Functional outcomes in biology are determined, for the most part, by net balance between sets of genes related to the specific outcome in question. The DNA microarray technology offers a new dimension of strength in molecular diagnostics by permitting the simultaneous analysis of large sets of genes. Automation of assay and novel bioinformatics tools make DNA microarrays a robust technology for diagnostics. Since its development a few years ago, this technology has been used for the applications of toxicogenomics, pharmacogenomics, cell biology, and clinical investigations addressing the prevention and intervention of diseases. Optimization of this technology to specifically address food safety is a vast resource that remains to be mined. Efforts to develop diagnostic custom arrays and simplified bioinformatics tools for field use are warranted.

Standards Development Activities at White Sands Test Facility

NASA Technical Reports Server (NTRS)

Baker, D. L.; Beeson, H. D.; Saulsberry, R. L.; Julien, H. L.; Woods, S. S.

2003-01-01

The development of standards and standard activities at the JSC White Sands Test Facility (WSTF) has been expanded to include the transfer of technology and standards to voluntary consensus organizations in five technical areas of importance to NASA. This effort is in direct response to the National Technology Transfer Act designed to accelerate transfer of technology to industry and promote government-industry partnerships. Technology transfer is especially important for WSTF, whose longterm mission has been to develop and provide vital propellant safety and hazards information to aerospace designers, operations personnel, and safety personnel. Meeting this mission is being accomplished through the preparation of consensus guidelines and standards, propellant hazards analysis protocols, and safety courses for the propellant use of hydrogen, oxygen, and hypergols, as well as the design and inspection of spacecraft pressure vessels and the use of pyrovalves in spacecraft propulsion systems. The overall WSTF technology transfer program is described and the current status of technology transfer activities are summarized.

Undocumented status as a social determinant of occupational safety and health: The workers' perspective.

PubMed

Flynn, Michael A; Eggerth, Donald E; Jacobson, C Jeffrey

2015-11-01

Undocumented immigration to the United States has grown dramatically over the past 25 years. This study explores undocumented status as a social determinant of occupational health by examining its perceived consequences on workplace safety of Latino immigrants. Guided by the Theory of Work Adjustment, qualitative analysis was conducted on transcripts from focus groups and individual interviews conducted with a convenience sample of Latino immigrant workers. Participants reported that unauthorized status negatively impacted their safety at work and resulted in a degree of alienation that exceeded the specific proscriptions of the law. Participants overwhelming used a strategy of disengagement to cope with the challenges they face as undocumented immigrants. This study describes the complex web of consequences resulting from undocumented status and its impact on occupational health. This study presents a framework connecting the daily work experiences of immigrants, the coping strategy of disengagement, and efforts to minimize the impact of structural violence. © 2015 Wiley Periodicals, Inc.

Ares I-X Upper Stage Simulator Structural Analyses Supporting the NESC Critical Initial Flaw Size Assessment

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Phillips, Dawn R.; Raju, Ivatury S.

2008-01-01

The structural analyses described in the present report were performed in support of the NASA Engineering and Safety Center (NESC) Critical Initial Flaw Size (CIFS) assessment for the ARES I-X Upper Stage Simulator (USS) common shell segment. The structural analysis effort for the NESC assessment had three thrusts: shell buckling analyses, detailed stress analyses of the single-bolt joint test; and stress analyses of two-segment 10 degree-wedge models for the peak axial tensile running load. Elasto-plastic, large-deformation simulations were performed. Stress analysis results indicated that the stress levels were well below the material yield stress for the bounding axial tensile design load. This report also summarizes the analyses and results from parametric studies on modeling the shell-to-gusset weld, flange-surface mismatch, bolt preload, and washer-bearing-surface modeling. These analyses models were used to generate the stress levels specified for the fatigue crack growth assessment using the design load with a factor of safety.

MS-Based Analytical Techniques: Advances in Spray-Based Methods and EI-LC-MS Applications

PubMed Central

Medina, Isabel; Cappiello, Achille; Careri, Maria

2018-01-01

Mass spectrometry is the most powerful technique for the detection and identification of organic compounds. It can provide molecular weight information and a wealth of structural details that give a unique fingerprint for each analyte. Due to these characteristics, mass spectrometry-based analytical methods are showing an increasing interest in the scientific community, especially in food safety, environmental, and forensic investigation areas where the simultaneous detection of targeted and nontargeted compounds represents a key factor. In addition, safety risks can be identified at the early stage through online and real-time analytical methodologies. In this context, several efforts have been made to achieve analytical instrumentation able to perform real-time analysis in the native environment of samples and to generate highly informative spectra. This review article provides a survey of some instrumental innovations and their applications with particular attention to spray-based MS methods and food analysis issues. The survey will attempt to cover the state of the art from 2012 up to 2017. PMID:29850370

The health team and the safety of the mother-baby binomial during labor and birth.

PubMed

Dornfeld, Dinara; Rubim Pedro, Eva Neri

2015-01-01

Describe the performance of the health care team regarding the safety of both mother and baby during labor and birth. Qualitative, descriptive, exploratory study. The subjects were: obstetricians, residents in Obstetrics, pediatricians, nurses, and nursing technicians. The observation technique was used for data collection in a public hospital, between March and July 2010. The data was subjected to thematic content analysis. CEP-GHC (No. 10/001). Data analysis revealed the themes: empathic support, woman's companion, skin-to-skin contact (SSC), and birth environment. The team promoted safe care through empathic support for women and appreciation and respect for the escort. In relation to SSC and the enabling environment for the reception of the newborn, efforts are still needed for these practices to be configured in secure care circumstances. The Nurse played a differential role in the team for the realization of safe care, because she was predominant in supporting women and promoting CPP.

U.S. Department of Agriculture: Similarities Between the Activities of the Department and Other Federal Agencies

DTIC Science & Technology

1998-12-09

food safety and land management, that are carried out by more than one agency; examined previous GAO reports that highlight these similarities; and reviewed the goals of the Government Performance and Results Act and USDA’S efforts to comply with it. Our analysis highlights many of the activities that are apparently similar. However, USDA’S activities may not be directed at the same clientele as those carried out by other federal agencies, and other agencies’ activities may be only a part of their overall mission. Our analysis did not determine all of the

A national safety stand-down to reduce construction worker falls.

PubMed

Bunting, Jessica; Branche, Christine; Trahan, Chris; Goldenhar, Linda

2017-02-01

Falls are the leading cause of death and third leading cause of non-fatal injuries in construction. In an effort to combat these numbers, The National Campaign to Prevent Falls in Construction began in April 2012. As the campaign gained momentum, a week called the National Safety Stand-Down to Prevent Falls was launched to draw attention to the campaign and its goals. The purpose of this paper is to examine the reach of the Stand-Down and lessons learned from its implementation. The Occupational Safety & Health Administration offered a certificate of participation during the Stand-Down. To print the certificate, respondents provided information about their company and stand-down event. CPWR - The Center for Construction Research and Training conducted analyses on the data collected to assess reach and extent of participation. In 2014, 4,882 stand-downs were reported. The total number reported in 2015 was 3,759. The number of participants, however, increased from 770,193 in 2014 to 1,041,307 in 2015. The Stand-Down successfully reached the construction industry and beyond. Respondents were enthusiastic and participated nationally and internationally in variety of activities. They also provided significant feedback that will be influential in future campaign planning. Numbers of Stand-Downs and participants for both years are estimated to be substantially higher than the data recorded from the certificate database. While we cannot determine impact, the reach of the Stand-Down has surpassed expectations. The data gathered provide support for the continuation of the Stand-Down. Campaign planners incorporated findings into future Stand-Down planning, materials creation, and promotion. This analysis also provides insight on how organizations can partner to create targeted national campaigns that include activities stakeholders in the construction industry respond to, and can be used to replicate our efforts for other safety and health initiatives in construction and other industries. Copyright © 2016 National Safety Council and Elsevier Ltd. All rights reserved.

Safety performance functions for ramp terminals at diamond interchanges.

DOT National Transportation Integrated Search

2011-07-01

This report documents two efforts to support CDOT in the area of Safety Performance Function (SPF) : development. The first involved the data collection and development of SPFs for five categories of ramp : terminals at diamond interchanges. For each...

Improving driver decisions and performance in high-speed, multilane, complex conditions.

DOT National Transportation Integrated Search

2009-01-01

In an effort to reduce fatalities resulting from traffic collisions, Californias Strategic Highway Safety Plan identified : 16 Challenge Areas under the State Highway Safety Plan. Improper driving decisions about the right of way and : turning bec...

49 CFR 1.82 - The Federal Aviation Administration.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., with due consideration of safety, capacity, efficiency, environmental compatibility and sustainability... connections to surface transportation, and other efforts to increase the environmental sustainability of the... improve airport safety, efficiency, and sustainability; (13) Exercising the final authority for carrying...

49 CFR 1.82 - The Federal Aviation Administration.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., with due consideration of safety, capacity, efficiency, environmental compatibility and sustainability... connections to surface transportation, and other efforts to increase the environmental sustainability of the... improve airport safety, efficiency, and sustainability; (13) Exercising the final authority for carrying...

49 CFR 1.82 - The Federal Aviation Administration.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., with due consideration of safety, capacity, efficiency, environmental compatibility and sustainability... connections to surface transportation, and other efforts to increase the environmental sustainability of the... improve airport safety, efficiency, and sustainability; (13) Exercising the final authority for carrying...

Bus operator safety : critical issues examination and model practices.

DOT National Transportation Integrated Search

2014-01-01

In this study, researchers at the National Center for Transit Research performed a multi-topic comprehensive : examination of bus operator-related critical safety and personal security issues. The goals of this research : effort were to: : 1. Identif...

Responding to Vaccine Safety Signals during Pandemic Influenza: A Modeling Study

PubMed Central

Maro, Judith C.; Fryback, Dennis G.; Lieu, Tracy A.; Lee, Grace M.; Martin, David B.

2014-01-01

Background Managing emerging vaccine safety signals during an influenza pandemic is challenging. Federal regulators must balance vaccine risks against benefits while maintaining public confidence in the public health system. Methods We developed a multi-criteria decision analysis model to explore regulatory decision-making in the context of emerging vaccine safety signals during a pandemic. We simulated vaccine safety surveillance system capabilities and used an age-structured compartmental model to develop potential pandemic scenarios. We used an expert-derived multi-attribute utility function to evaluate potential regulatory responses by combining four outcome measures into a single measure of interest: 1) expected vaccination benefit from averted influenza; 2) expected vaccination risk from vaccine-associated febrile seizures; 3) expected vaccination risk from vaccine-associated Guillain-Barre Syndrome; and 4) expected change in vaccine-seeking behavior in future influenza seasons. Results Over multiple scenarios, risk communication, with or without suspension of vaccination of high-risk persons, were the consistently preferred regulatory responses over no action or general suspension when safety signals were detected during a pandemic influenza. On average, the expert panel valued near-term vaccine-related outcomes relative to long-term projected outcomes by 3∶1. However, when decision-makers had minimal ability to influence near-term outcomes, the response was selected primarily by projected impacts on future vaccine-seeking behavior. Conclusions The selected regulatory response depends on how quickly a vaccine safety signal is identified relative to the peak of the pandemic and the initiation of vaccination. Our analysis suggested two areas for future investment: efforts to improve the size and timeliness of the surveillance system and behavioral research to understand changes in vaccine-seeking behavior. PMID:25536228

Estimation of Inherent Safety Margins in Loaded Commercial Spent Nuclear Fuel Casks

DOE PAGES

Banerjee, Kaushik; Robb, Kevin R.; Radulescu, Georgeta; ...

2016-06-15

We completed a novel assessment to determine the unquantified and uncredited safety margins (i.e., the difference between the licensing basis and as-loaded calculations) available in as-loaded spent nuclear fuel (SNF) casks. This assessment was performed as part of a broader effort to assess issues and uncertainties related to the continued safety of casks during extended storage and transportability following extended storage periods. Detailed analyses crediting the actual as-loaded cask inventory were performed for each of the casks at three decommissioned pressurized water reactor (PWR) sites to determine their characteristics relative to regulatory safety criteria for criticality, thermal, and shielding performance.more » These detailed analyses were performed in an automated fashion by employing a comprehensive and integrated data and analysis tool—Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS). Calculated uncredited criticality margins from 0.07 to almost 0.30 Δk eff were observed; calculated decay heat margins ranged from 4 to almost 22 kW (as of 2014); and significant uncredited transportation dose rate margins were also observed. The results demonstrate that, at least for the casks analyzed here, significant uncredited safety margins are available that could potentially be used to compensate for SNF assembly and canister structural performance related uncertainties associated with long-term storage and subsequent transportation. The results also suggest that these inherent margins associated with how casks are loaded could support future changes in cask licensing to directly or indirectly credit the margins. Work continues to quantify the uncredited safety margins in the SNF casks loaded at other nuclear reactor sites.« less

Experimental optimization of the FireFly 600 photovoltaic off-grid system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyson, William Earl; Orozco, Ron; Ralph, Mark E.

2003-10-01

A comprehensive evaluation and experimental optimization of the FireFly{trademark} 600 off-grid photovoltaic system manufactured by Energia Total, Ltd. was conducted at Sandia National Laboratories in May and June of 2001. This evaluation was conducted at the request of the manufacturer and addressed performance of individual system components, overall system functionality and performance, safety concerns, and compliance with applicable codes and standards. A primary goal of the effort was to identify areas for improvement in performance, reliability, and safety. New system test procedures were developed during the effort.

Alternative approaches to condition monitoring in freeway management systems.

DOT National Transportation Integrated Search

2002-01-01

In response to growing concerns over traffic congestion, traffic management systems have been built in large urban areas in an effort to improve the efficiency and safety of the transportation network. This research effort developed an automated cond...

Effects of patient safety culture interventions on incident reporting in general practice: a cluster randomised trial

PubMed Central

Verbakel, Natasha J; Langelaan, Maaike; Verheij, Theo JM; Wagner, Cordula; Zwart, Dorien LM

2015-01-01

Background A constructive safety culture is essential for the successful implementation of patient safety improvements. Aim To assess the effect of two patient safety culture interventions on incident reporting as a proxy of safety culture. Design and setting A three-arm cluster randomised trial was conducted in a mixed method study, studying the effect of administering a patient safety culture questionnaire (intervention I), the questionnaire complemented with a practice-based workshop (intervention II) and no intervention (control) in 30 general practices in the Netherlands. Method The primary outcome, the number of reported incidents, was measured with a questionnaire at baseline and a year after. Analysis was performed using a negative binomial model. Secondary outcomes were quality and safety indicators and safety culture. Mixed effects linear regression was used to analyse the culture questionnaires. Results The number of incidents increased in both intervention groups, to 82 and 224 in intervention I and II respectively. Adjusted for baseline number of incidents, practice size and accreditation status, the study showed that practices that additionally participated in the workshop reported 42 (95% confidence interval [CI] = 9.81 to 177.50) times more incidents compared to the control group. Practices that only completed the questionnaire reported 5 (95% CI = 1.17 to 25.49) times more incidents. There were no statistically significant differences in staff perception of patient safety culture at follow-up between the three study groups. Conclusion Educating staff and facilitating discussion about patient safety culture in their own practice leads to increased reporting of incidents. It is beneficial to invest in a team-wise effort to improve patient safety. PMID:25918337

Effects of patient safety culture interventions on incident reporting in general practice: a cluster randomised trial.

PubMed

Verbakel, Natasha J; Langelaan, Maaike; Verheij, Theo J M; Wagner, Cordula; Zwart, Dorien L M

2015-05-01

A constructive safety culture is essential for the successful implementation of patient safety improvements. To assess the effect of two patient safety culture interventions on incident reporting as a proxy of safety culture. A three-arm cluster randomised trial was conducted in a mixed method study, studying the effect of administering a patient safety culture questionnaire (intervention I), the questionnaire complemented with a practice-based workshop (intervention II) and no intervention (control) in 30 general practices in the Netherlands. The primary outcome, the number of reported incidents, was measured with a questionnaire at baseline and a year after. Analysis was performed using a negative binomial model. Secondary outcomes were quality and safety indicators and safety culture. Mixed effects linear regression was used to analyse the culture questionnaires. The number of incidents increased in both intervention groups, to 82 and 224 in intervention I and II respectively. Adjusted for baseline number of incidents, practice size and accreditation status, the study showed that practices that additionally participated in the workshop reported 42 (95% confidence interval [CI] = 9.81 to 177.50) times more incidents compared to the control group. Practices that only completed the questionnaire reported 5 (95% CI = 1.17 to 25.49) times more incidents. There were no statistically significant differences in staff perception of patient safety culture at follow-up between the three study groups. Educating staff and facilitating discussion about patient safety culture in their own practice leads to increased reporting of incidents. It is beneficial to invest in a team-wise effort to improve patient safety. © British Journal of General Practice 2015.

Evidence-based safety (EBS) management: A new approach to teaching the practice of safety management (SM).

PubMed

Wang, Bing; Wu, Chao; Shi, Bo; Huang, Lang

2017-12-01

In safety management (SM), it is important to make an effective safety decision based on the reliable and sufficient safety-related information. However, many SM failures in organizations occur for a lack of the necessary safety-related information for safety decision-making. Since facts are the important basis and foundation for decision-making, more efforts to seek the best evidence relevant to a particular SM problem would lead to a more effective SM solution. Therefore, the new paradigm for decision-making named "evidence-based practice (EBP)" can hold important implications for SM, because it uses the current best evidence for effective decision-making. Based on a systematic review of existing SM approaches and an analysis of reasons why we need new SM approaches, we created a new SM approach called evidence-based safety (EBS) management by introducing evidence-based practice into SM. It was necessary to create new SM approaches. A new SM approach called EBS was put forward, and the basic questions of EBS such as its definition and core were analyzed in detail. Moreover, the determinants of EBS included manager's attitudes towards EBS; evidence-based consciousness in SM; evidence sources; technical support; EBS human resources; organizational culture; and individual attributes. EBS is a new and effective approach to teaching the practice of SM. Of course, further research on EBS should be carried out to make EBS a reality. Practical applications: Our work can provide a new and effective idea and method to teach the practice of SM. Specifically, EBS proposed in our study can help safety professionals make an effective safety decision based on a firm foundation of high-grade evidence. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

A Multilevel Analysis of U.S. Hospital Patient Safety Culture Relationships With Perceptions of Voluntary Event Reporting.

PubMed

Burlison, Jonathan D; Quillivan, Rebecca R; Kath, Lisa M; Zhou, Yinmei; Courtney, Sam C; Cheng, Cheng; Hoffman, James M

2016-11-03

Patient safety events offer opportunities to improve patient care, but, unfortunately, events often go unreported. Although some barriers to event reporting can be reduced with electronic reporting systems, insight on organizational and cultural factors that influence reporting frequency may help hospitals increase reporting rates and improve patient safety. The purpose of this study was to evaluate the associations between dimensions of patient safety culture and perceived reporting practices of safety events of varying severity. We conducted a cross-sectional survey study using previously collected data from The Agency for Healthcare Research and Quality Hospital Survey of Patient Safety Culture as predictors and outcome variables. The dataset included health-care professionals in U.S. hospitals, and data were analyzed using multilevel modeling techniques. Data from 223,412 individuals, 7816 work areas/units, and 967 hospitals were analyzed. Whether examining near miss, no harm, or potential for harm safety events, the dimension feedback about error accounted for the most unique predictive variance in the outcome frequency of events reported. Other significantly associated variables included organizational learning, nonpunitive response to error, and teamwork within units (all P < 0.001). As the perceived severity of the safety event increased, more culture dimensions became significantly associated with voluntary reporting. To increase the likelihood that a patient safety event will be voluntarily reported, our study suggests placing priority on improving event feedback mechanisms and communication of event-related improvements. Focusing efforts on these aspects may be more efficient than other forms of culture change.

A Multilevel Analysis of U.S. Hospital Patient Safety Culture Relationships with Perceptions of Voluntary Event Reporting

PubMed Central

Burlison, Jonathan D.; Quillivan, Rebecca R.; Kath, Lisa M.; Zhou, Yinmei; Courtney, Sam C.; Cheng, Cheng; Hoffman, James M.

2016-01-01

Objectives Patient safety events offer opportunities to improve patient care, but, unfortunately, events often go unreported. Although some barriers to event reporting can be reduced with electronic reporting systems, insight on organizational and cultural factors that influence reporting frequency may help hospitals increase reporting rates and improve patient safety. The purpose of this study was to evaluate the associations between dimensions of patient safety culture and perceived reporting practices of safety events of varying severity. Methods We conducted a cross-sectional survey study using previously collected data from The Agency for Healthcare Research and Quality Hospital Survey of Patient Safety Culture as predictors and outcome variables. The dataset included healthcare professionals in U.S. hospitals, and data were analyzed by using multilevel modeling techniques. Results Data from 223,412 individuals, 7816 work areas/units and 967 hospitals were analyzed. Whether examining Near-miss, No harm, or Potential for harm safety events, the dimension Feedback about error accounted for the most unique predictive variance in the outcome Frequency of events reported. Other significantly associated variables included Organizational learning, Nonpunitive response to error, and Teamwork within units (all p<.001). As the perceived severity of the safety event increased, more culture dimensions became significantly associated with voluntary reporting. Conclusions To increase the likelihood that a patient safety event will be voluntarily reported, our study suggests placing priority on improving event feedback mechanisms and communication of event-related improvements. Focusing efforts on these aspects may be more efficient than other forms of culture change. PMID:27820722

Third year nursing students' viewpoints about circumstances which threaten safety in the clinical setting.

PubMed

Montgomery, Phyllis; Killam, Laura; Mossey, Sharolyn; Heerschap, Corey

2014-02-01

Evidence emphasizes that learners, educators, clinicians, programs, and organizations share the responsibility for establishing and maintaining safety throughout undergraduate nursing education. Increased knowledge about students' perceptions of threats to safety in the clinical setting may guide educators' efforts to promote the development of safe novice practitioners while preserving patient safety. The purpose of this study was to describe third year nursing students' viewpoints of the circumstances which threaten safety in the clinical setting. Using Q methodology, 34 third year Bachelor of Science in Nursing students sorted 43 theoretical statement cards. Each card identified a statement describing a threat to safety in the clinical setting. These statements were generated through a review of nursing literature and consultation with experts in nursing education. Centroid factor analysis and varimax rotation identified viewpoints regarding circumstances that most threaten safety. Three discrete viewpoints and one consensus perspective constituted students' description of threatened safety. The discrete viewpoints were labeled lack of readiness, misdirected practices, and negation of professional boundaries. There was consensus that it is most unsafe in the clinical setting when novices fail to consolidate an integrated cognitive, behavioral, and ethical identity. This unifying perspective was labeled non-integration. Third year nursing students and their educators are encouraged to be mindful of the need to ensure readiness prior to entry into the clinical setting. In the clinical setting, the learning of prepared students must be guided by competent educators. Finally, both students and their educators must respect professional boundaries to promote safety for students and patients. © 2013.

Human factors and ergonomics as a patient safety practice

PubMed Central

Carayon, Pascale; Xie, Anping; Kianfar, Sarah

2014-01-01

Background Human factors and ergonomics (HFE) approaches to patient safety have addressed five different domains: usability of technology; human error and its role in patient safety; the role of healthcare worker performance in patient safety; system resilience; and HFE systems approaches to patient safety. Methods A review of various HFE approaches to patient safety and studies on HFE interventions was conducted. Results This paper describes specific examples of HFE-based interventions for patient safety. Studies show that HFE can be used in a variety of domains. Conclusions HFE is a core element of patient safety improvement. Therefore, every effort should be made to support HFE applications in patient safety. PMID:23813211

A Research Roadmap for Computation-Based Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald; Mandelli, Diego; Joe, Jeffrey

2015-08-01

The United States (U.S.) Department of Energy (DOE) is sponsoring research through the Light Water Reactor Sustainability (LWRS) program to extend the life of the currently operating fleet of commercial nuclear power plants. The Risk Informed Safety Margin Characterization (RISMC) research pathway within LWRS looks at ways to maintain and improve the safety margins of these plants. The RISMC pathway includes significant developments in the area of thermalhydraulics code modeling and the development of tools to facilitate dynamic probabilistic risk assessment (PRA). PRA is primarily concerned with the risk of hardware systems at the plant; yet, hardware reliability is oftenmore » secondary in overall risk significance to human errors that can trigger or compound undesirable events at the plant. This report highlights ongoing efforts to develop a computation-based approach to human reliability analysis (HRA). This computation-based approach differs from existing static and dynamic HRA approaches in that it: (i) interfaces with a dynamic computation engine that includes a full scope plant model, and (ii) interfaces with a PRA software toolset. The computation-based HRA approach presented in this report is called the Human Unimodels for Nuclear Technology to Enhance Reliability (HUNTER) and incorporates in a hybrid fashion elements of existing HRA methods to interface with new computational tools developed under the RISMC pathway. The goal of this research effort is to model human performance more accurately than existing approaches, thereby minimizing modeling uncertainty found in current plant risk models.« less

An Economic Evaluation of Food Safety Education Interventions: Estimates and Critical Data Gaps.

PubMed

Zan, Hua; Lambea, Maria; McDowell, Joyce; Scharff, Robert L

2017-08-01

The economic evaluation of food safety interventions is an important tool that practitioners and policy makers use to assess the efficacy of their efforts. These evaluations are built on models that are dependent on accurate estimation of numerous input variables. In many cases, however, there is no data available to determine input values and expert opinion is used to generate estimates. This study uses a benefit-cost analysis of the food safety component of the adult Expanded Food and Nutrition Education Program (EFNEP) in Ohio as a vehicle for demonstrating how results based on variable values that are not objectively determined may be sensitive to alternative assumptions. In particular, the focus here is on how reported behavioral change is translated into economic benefits. Current gaps in the literature make it impossible to know with certainty how many people are protected by the education (what are the spillover effects?), the length of time education remains effective, and the level of risk reduction from change in behavior. Based on EFNEP survey data, food safety education led 37.4% of participants to improve their food safety behaviors. Under reasonable default assumptions, benefits from this improvement significantly outweigh costs, yielding a benefit-cost ratio of between 6.2 and 10.0. Incorporation of a sensitivity analysis using alternative estimates yields a greater range of estimates (0.2 to 56.3), which highlights the importance of future research aimed at filling these research gaps. Nevertheless, most reasonable assumptions lead to estimates of benefits that justify their costs.

Nudging for Prevention in Occupational Health and Safety in South Africa Using Fiscal Policies.

PubMed

de Jager, Pieter; Rees, David; Kisting, Sophia; Kgalamono, Spo; Ndaba, Mpume; Stacey, Nicolas; Tugendhaft, Aviva; Hofman, Karen

2017-08-01

Currently, in some countries occupational health and safety policy and practice have a bias toward secondary prevention and workers' compensation rather than primary prevention. Particularly, in emerging economies, research has not adequately contributed to effective interventions and improvements in workers' health. This article, using South Africa as a case study, describes a methodology for identifying candidate fiscal policy interventions and describes the policy interventions selected for occupational health and safety. It is argued that fiscal policies are well placed to deal with complex intersectoral health problems and to focus efforts on primary prevention. A major challenge is the lack of empirical evidence to support the effectiveness of fiscal policies in improving workers' health. A second challenge is the underprioritization of occupational health and safety partly due to the relatively small burden of disease attributed to occupational exposures. Both challenges can and should be overcome by (i) conducting policy-relevant research to fill the empirical gaps and (ii) reconceptualizing, both for policy and research purposes, the role of work as a determinant of population health. Fiscal policies to prevent exposure to hazards at work have face validity and are thus appealing, not as a replacement for other efforts to improve health, but as part of a comprehensive effort toward prevention.

Continuous Evaluation Of In-Service Highway Safety Feature Performance

DOT National Transportation Integrated Search

2002-09-01

This report documents the research effort, findings, conclusions, and recommendations of a study to develop a program for the continuous in-service evaluation of highway safety features. The study consisted of two phases and eight tasks. An in-servic...

Effectiveness of increased law enforcement surveillance on work zone safety in Mississippi.

DOT National Transportation Integrated Search

2007-07-01

Increased law enforcement surveillance program is one of the methods currently been implemented by departments of transportation in the United States in an effort to increase safety for both drivers and workers in highway construction zones. Unfortun...

Evaluation plan for the ticketing aggressive cars and trucks (TACT) program in Kentucky.

DOT National Transportation Integrated Search

2010-02-01

Kentucky State Police Division of Commercial Vehicle Enforcement in cooperation with Federal Motor Carrier Safety Administration (FMCSA) has started a concentrated education and enforcement campaign in an effort to increase the safety and awareness o...

Delivering Food Safety Education to Middle School Students Using a Web-Based, Interactive, Multimedia, Computer Program

ERIC Educational Resources Information Center

Lynch, Rebecca A.; Steen, M. Dale; Pritchard, Todd J.; Buzzell, Paul R.; Pintauro, Stephen J.

2008-01-01

More than 76 million persons become ill from foodborne pathogens in the United States each year. To reduce these numbers, food safety education efforts need to be targeted at not only adults, but school children as well. The middle school grades are ideal for integrating food safety education into the curriculum while simultaneously contributing…

Improving Employees' Safety Awareness in Healthcare Organizations Using the DMAIC Quality Improvement Approach.

PubMed

Momani, Amer; Hirzallah, Muʼath; Mumani, Ahmad

Occupational injuries and illnesses in healthcare can cause great human suffering, incur high cost, and have an adverse impact on the quality of patient care. One of the most effective solutions for addressing health and safety issues and improving decisions at the point of care rests in raising employees' safety awareness to recognize, avoid, or respond to potential problems before they arise. In this article, the DMAIC Six Sigma model (Define, Measure, Analyze, Improve, Control) is used as a systematic program to measure, improve, and sustain employees' safety awareness in healthcare organizations. We report on a case study using the model, which was implemented and validated at a local hospital. First, the occupational health and safety knowledge that each job requires was identified. Next, the degree of competence of jobholders to meet these requirements was assessed. Based on the assessment, different awareness-raising efforts were proposed and implemented. The results showed significant improvement in the overall safety awareness compliance assessed: from 74.2% to 84.4% (p < .001) after the intervention. The proposed model ensures that the organization's awareness-raising efforts serve its actual needs and produce optimized and sustained results that eventually lead to safer healthcare service.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunett, A. J.; Fei, T.; Strons, P. S.

The Transient Reactor Test Facility (TREAT), located at Idaho National Laboratory (INL), is a test facility designed to evaluate the performance of reactor fuels and materials under transient accident conditions. The facility, an air-cooled, graphite-moderated reactor designed to utilize fuel containing high-enriched uranium (HEU), has been in non-operational standby status since 1994. Currently, in support of the missions of the Department of Energy (DOE) National Nuclear Security Administration (NNSA) Material Management and Minimization (M3) Reactor Conversion Program, a new core design is being developed for TREAT that will utilize low-enriched uranium (LEU). The primary objective of this conversion effort ismore » to design an LEU core that is capable of meeting the performance characteristics of the existing HEU core. Minimal, if any, changes are anticipated for the supporting systems (e.g. reactor trip system, filtration/cooling system, etc.); therefore, the LEU core must also be able to function with the existing supporting systems, and must also satisfy acceptable safety limits. In support of the LEU conversion effort, a range of ancillary safety analyses are required to evaluate the LEU core operation relative to that of the existing facility. These analyses cover neutronics, shielding, and thermal hydraulic topics that have been identified as having the potential to have reduced safety margins due to conversion to LEU fuel, or are required to support the required safety analyses documentation. The majority of these ancillary tasks have been identified in [1] and [2]. The purpose of this report is to document the ancillary safety analyses that have been performed at Argonne National Laboratory during the early stages of the LEU design effort, and to describe ongoing and anticipated analyses. For all analyses presented in this report, methodologies are utilized that are consistent with, or improved from, those used in analyses for the HEU Final Safety Analysis Report (FSAR) [3]. Depending on the availability of historical data derived from HEU TREAT operation, results calculated for the LEU core are compared to measurements obtained from HEU TREAT operation. While all analyses in this report are largely considered complete and have been reviewed for technical content, it is important to note that all topics will be revisited once the LEU design approaches its final stages of maturity. For most safety significant issues, it is expected that the analyses presented here will be bounding, but additional calculations will be performed as necessary to support safety analyses and safety documentation. It should also be noted that these analyses were completed as the LEU design evolved, and therefore utilized different LEU reference designs. Preliminary shielding, neutronic, and thermal hydraulic analyses have been completed and have generally demonstrated that the various LEU core designs will satisfy existing safety limits and standards also satisfied by the existing HEU core. These analyses include the assessment of the dose rate in the hodoscope room, near a loaded fuel transfer cask, above the fuel storage area, and near the HEPA filters. The potential change in the concentration of tramp uranium and change in neutron flux reaching instrumentation has also been assessed. Safety-significant thermal hydraulic items addressed in this report include thermally-induced mechanical distortion of the grid plate, and heating in the radial reflector.« less

Best practices for INDOT-funded work zone police patrols.

DOT National Transportation Integrated Search

2012-12-01

Transportation agencies across the U.S. are expending a great deal of effort to improve highway work zone safety. Among those efforts : is a special fund for work zone enforcement established by the Indiana Department of Transportation (INDOT). The a...

Combating the drug-impaired driver : a prescription for safer highways.

DOT National Transportation Integrated Search

1985-01-01

In recent years, the Commonwealth of Virginia has increased its efforts to improve highway safety by combating the problems created by drunken drivers. However, law enforcement officials still face major obstacles in their efforts to detect and prose...

A public-professional web-bridge for vaccines and vaccination: user concerns about vaccine safety.

PubMed

García-Basteiro, Alberto L; Alvarez-Pasquín, María-José; Mena, Guillermo; Llupià, Anna; Aldea, Marta; Sequera, Victor-Guillermo; Sanz, Sergi; Tuells, Jose; Navarro-Alonso, José-Antonio; de Arísteguí, Javier; Bayas, José-María

2012-05-28

Vacunas.org (http://www.vacunas.org), a website founded by the Spanish Association of Vaccinology offers a personalized service called Ask the Expert, which answers any questions posed by the public or health professionals about vaccines and vaccination. The aim of this study was to analyze the factors associated with questions on vaccination safety and determine the characteristics of questioners and the type of question asked during the period 2008-2010. A total of 1341 questions were finally included in the analysis. Of those, 30% were related to vaccine safety. Questions about pregnant women had 5.01 higher odds of asking about safety (95% CI 2.82-8.93) than people not belonging to any risk group. Older questioners (>50 years) were less likely to ask about vaccine safety compared to younger questioners (OR: 0.44, 95% CI 0.25-0.76). Questions made after vaccination or related to influenza (including H1N1) or travel vaccines were also associated with a higher likelihood of asking about vaccine safety. These results identify risk groups (pregnant women), population groups (older people) and some vaccines (travel and influenza vaccines, including H1N1) where greater efforts to provide improved, more-tailored vaccine information in general and on the Internet are required. Copyright © 2011 Elsevier Ltd. All rights reserved.

System Risk Assessment and Allocation in Conceptual Design

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Smith, Natasha L.; Zang, Thomas A. (Technical Monitor)

2003-01-01

As aerospace systems continue to evolve in addressing newer challenges in air and space transportation, there exists a heightened priority for significant improvement in system performance, cost effectiveness, reliability, and safety. Tools, which synthesize multidisciplinary integration, probabilistic analysis, and optimization, are needed to facilitate design decisions allowing trade-offs between cost and reliability. This study investigates tools for probabilistic analysis and probabilistic optimization in the multidisciplinary design of aerospace systems. A probabilistic optimization methodology is demonstrated for the low-fidelity design of a reusable launch vehicle at two levels, a global geometry design and a local tank design. Probabilistic analysis is performed on a high fidelity analysis of a Navy missile system. Furthermore, decoupling strategies are introduced to reduce the computational effort required for multidisciplinary systems with feedback coupling.

Bridging the Gap: A Framework and Strategies for Integrating the Quality and Safety Mission of Teaching Hospitals and Graduate Medical Education.

PubMed

Tess, Anjala; Vidyarthi, Arpana; Yang, Julius; Myers, Jennifer S

2015-09-01

Integrating the quality and safety mission of teaching hospitals and graduate medical education (GME) is a necessary step to provide the next generation of physicians with the knowledge, skills, and attitudes they need to participate in health system improvement. Although many teaching hospital and health system leaders have made substantial efforts to improve the quality of patient care, few have fully included residents and fellows, who deliver a large portion of that care, in their efforts. Despite expectations related to the engagement of these trainees in health care quality improvement and patient safety outlined by the Accreditation Council for Graduate Medical Education in the Clinical Learning Environment Review program, a structure for approaching this integration has not been described.In this article, the authors present a framework that they hope will assist teaching hospitals in integrating residents and fellows into their quality and safety efforts and in fostering a positive clinical learning environment for education and patient care. The authors define the six essential elements of this framework-organizational culture, teaching hospital-GME alignment, infrastructure, curricular resources, faculty development, and interprofessional collaboration. They then describe the organizational characteristics required for each element and offer concrete strategies to achieve integration. This framework is meant to be a starting point for the development of robust national models of infrastructure, alignment, and collaboration between GME and health care quality and safety leaders at teaching hospitals.

Large Scale Experiments on Spacecraft Fire Safety

NASA Technical Reports Server (NTRS)

Urban, David L.; Ruff, Gary A.; Minster, Olivier; Toth, Balazs; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Cowlard, Adam J.; Legros, Guillaume; Eigenbrod, Christian;

Large Scale Experiments on Spacecraft Fire Safety

NASA Technical Reports Server (NTRS)

Urban, David; Ruff, Gary A.; Minster, Olivier; Fernandez-Pello, A. Carlos; Tien, James S.; Torero, Jose L.; Legros, Guillaume; Eigenbrod, Christian; Smirnov, Nickolay; Fujita, Osamu;

Transformational and passive leadership as cross-level moderators of the relationships between safety knowledge, safety motivation, and safety participation.

PubMed

Jiang, Lixin; Probst, Tahira M

2016-06-01

While safety knowledge and safety motivation are well-established predictors of safety participation, less is known about the impact of leadership styles on these relationships. The purpose of the current study was to examine whether the positive relationships between safety knowledge and motivation and safety participation are contingent on transformational and passive forms of safety leadership. Using multilevel modeling with a sample of 171 employees nested in 40 workgroups, we found that transformational safety leadership strengthened the safety knowledge-participation relationship, whereas passive leadership weakened the safety motivation-participation relationship. Under low transformational leadership, safety motivation was not related to safety participation; under high passive leadership, safety knowledge was not related to safety participation. These results are discussed in light of organizational efforts to increase safety-related citizenship behaviors. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

The effect of safety initiatives on safety performance: a longitudinal study.

PubMed

Hoonakker, Peter; Loushine, Todd; Carayon, Pascale; Kallman, James; Kapp, Andrew; Smith, Michael J

2005-07-01

Construction industry is one of the most dangerous industries, not only in the USA, but worldwide. In this longitudinal study we examined the effects of safety initiatives on the safety performance of construction companies. One of the measures commonly used in the USA to track a company's safety performance is the experience modification rate (EMR). The EMR is based on the company's safety records (injury claims) from the past three full years and is used to calculate the workers' compensation insurance premiums. In a longitudinal study, we studied the effects of safety efforts and initiatives on the EMR. The results show that safety initiatives and money spent on safety do improve safety performance, but only over time.

Reducing health care hazards: lessons from the commercial aviation safety team.

PubMed

Pronovost, Peter J; Goeschel, Christine A; Olsen, Kyle L; Pham, Julius C; Miller, Marlene R; Berenholtz, Sean M; Sexton, J Bryan; Marsteller, Jill A; Morlock, Laura L; Wu, Albert W; Loeb, Jerod M; Clancy, Carolyn M

2009-01-01

The movement to improve quality of care and patient safety has grown, but examples of measurable and sustained progress are rare. The slow progress made in health care contrasts with the success of aviation safety. After a tragic 1995 plane crash, the aviation industry and government created the Commercial Aviation Safety Team to reduce fatal accidents. This public-private partnership of safety officials and technical experts is responsible for the decreased average rate of fatal aviation accidents. We propose a similar partnership in the health care community to coordinate national efforts and move patient safety and quality forward.

Managing health and safety risks: Implications for tailoring health and safety management system practices.

PubMed

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Review article: safety aspects of anesthesia in under-resourced locations.

PubMed

Enright, Angela

2013-02-01

Improving patient safety during anesthesia and surgery is the focus of much effort worldwide. Major advances have occurred since the 1980s, especially in economically advantaged areas. This paper is a review of some of the challenges that face those who work in resource-poor areas of the world. There is a shortage of trained anesthesia providers, both physician and non-physician, and this is particularly acute outside urban areas. Anesthesia is still sometimes delivered by unqualified people, which results in expected high rates of morbidity and mortality. Residency training programs in low-income countries ought to increase their output as anesthesiologists must be available to supervise non-physician providers. All groups require continuing medical education. In addition, increased efforts are needed to recruit trainees into the specialty of anesthesia and to retain them locally. There is a well-recognized shortage of resources for anesthesia. Consequently, concerted efforts are necessary to ensure reliable supplies of drugs, and attention should be paid to the procurement of anesthesia equipment appropriate for the location. Biomedical support must also be developed. Lifebox is a charitable foundation dedicated to supplying pulse oximeters to low- and middle-income countries. Adoption of the World Health Organization's Surgical Safety Checklist could further reduce morbidity and mortality. Much time, effort, planning, and resources are required to ensure that anesthesia in low-income areas can reach internationally accepted standards. Such investment in anesthesia would result in wider access to surgical and obstetrical care, and the quality and safety of that care would be much improved.

NACA Wartime Safety Poster

NASA Image and Video Library

1945-04-21

One of many safety posters produced by NACA artists during World War II. The Aircraft Engine Research Laboratory established a Safety Office in 1942 to coordinate and oversee safety-related activities. The lab struggled to maintain a full staff during the war when military research projects were at a peak. NACA management mandated six-day work weeks without overtime and the elimination of holidays. As such, workplace injuries were a serious threat to maintaining productivity needed to sustain the military’s aeronautics efforts.

Loaded Questions: Internet Commenters’ Opinions on Physician-Patient Firearm Safety Conversations

PubMed Central

Knoepke, Christopher E.; Allen, Amanda; Ranney, Megan L.; Wintemute, Garen J.; Matlock, Daniel D.; Betz, Marian E.

2017-01-01

Introduction Medical and public health societies advocate that healthcare providers (HCPs) counsel at-risk patients to reduce firearm injury risk. Anonymous online media comments often contain extreme viewpoints and may therefore help in understanding challenges of firearm safety counseling. To help inform injury prevention efforts, we sought to examine commenters’ stated opinions regarding firearm safety counseling HCPs. Methods Qualitative descriptive analysis of online comments posted following news items (in May–June, 2016) about a peer-reviewed publication addressing when and how HCPs should counsel patients regarding firearms. Results Among 871 comments posted by 522 individuals, most (57%) were generally negative toward firearm discussions, 17% were positive, and 26% were neutral/unclear. Two major categories and multiple themes emerged. “Areas of agreement” included that discussions may be valuable (1) when addressing risk of harm to self or others, (2) in pediatric injury prevention, and (3) as general safety education (without direct questioning), and that (4) HCPs lack gun safety and cultural knowledge. “Areas of tension” included whether (1) firearms are a public health issue, (2) counseling is effective prevention practice, (3) suicide could/should be prevented, and (4) firearm safety counseling is within HCPs’ purview. Conclusion Among this set of commenters with likely extreme viewpoints, opinions were generally negative toward firearm safety conversations, but with some support in specific situations. Providing education, counseling, or materials without asking about firearm ownership was encouraged. Engaging firearm advocates when developing materials may enhance the acceptability of prevention activities. PMID:28874943

Tracking data in the office environment.

PubMed

Erickson, Ty B

2010-09-01

Data tracking in the office setting focuses on a narrow spectrum of the entire patient safety arena; however, when properly executed, data tracking increases staff members' awareness of the importance of patient safety. Data tracking is also a high-volume event and thereby continues to loop back on the consciousness of providers in all aspects of their practice. Improvement in date tracking will improve the collateral areas of patient safety such as proper medication usage, legibility of written communication, effective delegation of patient safety initiatives, and a collegial effort at developing teams for safety design processes.

49 CFR 350.301 - What level of effort must a State maintain to qualify for MCSAP funding?

Code of Federal Regulations, 2012 CFR

2012-10-01

... funds and State matching funds, for CMV safety programs eligible for funding under this part at a level...) State funds used for federally sponsored demonstration or pilot CMV safety programs. (c) The State must...

49 CFR 350.301 - What level of effort must a State maintain to qualify for MCSAP funding?

Code of Federal Regulations, 2013 CFR

2013-10-01

... funds and State matching funds, for CMV safety programs eligible for funding under this part at a level...) State funds used for federally sponsored demonstration or pilot CMV safety programs. (c) The State must...

49 CFR 350.301 - What level of effort must a State maintain to qualify for MCSAP funding?

Code of Federal Regulations, 2014 CFR

2014-10-01

... funds and State matching funds, for CMV safety programs eligible for funding under this part at a level...) State funds used for federally sponsored demonstration or pilot CMV safety programs. (c) The State must...

Recommendations for Highway Construction, Maintenance, and Service Equipment Warning Lights and Pavement Data Collection System Safety

DOT National Transportation Integrated Search

1998-10-01

This report presents the recommendations to improve the vehicle and equipment warning light policy for the Texas Department of Transportation, and improve the safety of the Department's pavement data collection activities. Research efforts include a ...

Aviation Safety: FAA Has Begun Efforts to Make Data More Publicly Available

DOT National Transportation Integrated Search

1997-04-25

Public concern about the safety of the nation's aviation system escalated : following the crashes of ValuJet flight 592 and TWA flight 800. The Congress : and the public expressed interest in having the Federal Aviation Administration : (FAA) publish...

Development of safety performance functions for North Carolina.

DOT National Transportation Integrated Search

2011-12-06

"The objective of this effort is to develop safety performance functions (SPFs) for different types of facilities in North Carolina : and illustrate how they can be used to improve the decision making process. The prediction models in Part C of the H...

Hazardous material transportation safety and security field operational test final evaluation plan : executive summary

DOT National Transportation Integrated Search

2003-03-17

The purpose of this effort is to independently evaluate the Battelle Operational Test Team to test methods for leveraging technology and operations to improve HAZMAT transport security, safety, and operational efficiency. As such, the preceding techn...

A peer-to-peer traffic safety campaign program.

DOT National Transportation Integrated Search

2014-06-01

The purpose of this project was to implement a peer-to-peer drivers safety program designed for high school students. : This project builds upon an effective peer-to-peer outreach effort in Texas entitled Teens in the Driver Seat (TDS), the : nati...

Literature search and scan tour of wrong-way driving mitigation measures across the United States.

DOT National Transportation Integrated Search

2017-01-01

The Utah Department of Transportation (UDOT) has long been on the forefront of nationwide efforts to improve roadway safety. Their safety focus encompasses infrastructure improvements as well as non-infrastructure elements such as education and enfor...

[Determinants in an occupational health and safety program implementation].

PubMed

Chaves, Sonia Cristina Lima; Santana, Vilma Sousa; de Leão, Inez Cristina Martins; de Santana, Jusiene Nogueira; de Almeida Lacerda, Lívia Maria Aragão

2009-03-01

To identify predictors for the degree to which a program that integrates occupational health surveillance with labor safety, and involves occupational health/safety specialists, company management, and employees, is implemented. This ecological study evaluated companies implementing the occupational health and safety program (OHSP) proposed by the state of Bahia's regional department of Serviço Social da Indústria (Social Services for Industry, SESI) during the 2005-2006 cycle. The companies that participated were randomly selected. Data were collected through interviews with key contacts within the companies and from technical reports issued by SESI. Multiple linear regression was used to identify factors related to the company, employee, occupational/safety specialist, and any subdimensions that might promote OHSP implementation. Of the 78 companies selected (3 384 employees), the degree to which OHSP was implemented was "advanced" in 24.4%, "intermediate" in 53.8%, and "initial" in 19.3%. Company-related, employee-related and specialist-related factors were positively associated with OHSP implementation (P < 0.001). The most important factor overall was the program's financial autonomy (beta = 4.40; P < 0.001). Bivariate analysis revealed that the degree of implementation was associated with the employees' level of health/safety knowledge (beta = 1.58; P < 0.05) and training (beta = 0.40; P < 0.001) and with communication between the occupational safety team (beta = 1.89; P < 0.01) and the health team (beta = 0.58; P < 0.05). These findings remained unchanged after adjustment for levels of education among managers and employees, salary/wages, company size, and risk. The time and resources available for employees to dedicate to occupational health and safety, the integration and reinforcement of employee and manager training programs, and improved relationship between occupational health and safety teams may contribute to the success of health and safety promotion efforts among employees.

Developing a safe on-orbit cryogenic depot

NASA Technical Reports Server (NTRS)

Bahr, Nicholas J.

1992-01-01

New U.S. space initiatives will require technology to realize planned programs such as piloted lunar and Mars missions. Key to the optimal execution of such missions are high performance orbit transfer vehicles and propellant storage facilities. Large amounts of liquid hydrogen and oxygen demand a uniquely designed on-orbit cryogenic propellant depot. Because of the inherent dangers in propellant storage and handling, a comprehensive system safety program must be established. This paper shows how the myriad and complex hazards demonstrate the need for an integrated safety effort to be applied from program conception through operational use. Even though the cryogenic depot is still in the conceptual stage, many of the hazards have been identified, including fatigue due to heavy thermal loading from environmental and operating temperature extremes, micrometeoroid and/or depot ancillary equipment impact (this is an important problem due to the large surface area needed to house the large quantities of propellant), docking and maintenance hazards, and hazards associated with extended extravehicular activity. Various safety analysis techniques were presented for each program phase. Specific system safety implementation steps were also listed. Enhanced risk assessment was demonstrated through the incorporation of these methods.

Methods of quantitative risk assessment: The case of the propellant supply system

NASA Astrophysics Data System (ADS)

Merz, H. A.; Bienz, A.

1984-08-01

As a consequence of the disastrous accident in Lapua (Finland) in 1976, where an explosion in a cartridge loading facility killed 40 and injured more than 70 persons, efforts were undertaken to examine and improve the safety of such installations. An ammunition factory in Switzerland considered the replacement of the manual supply of propellant hoppers by a new pneumatic supply system. This would reduce the maximum quantity of propellant in the hoppers to a level, where an accidental ignition would no longer lead to a detonation, and this would drastically limit the effects on persons. A quantitative risk assessment of the present and the planned supply system demonstrated that, in this particular case, the pneumatic supply system would not reduce the risk enough to justify the related costs. In addition, it could be shown that the safety of the existing system can be improved more effectively by other safety measures at considerably lower costs. Based on this practical example, the advantages of a strictly quantitative risk assessment for the safety planning in explosives factories are demonstrated. The methodological background of a risk assessment and the steps involved in the analysis are summarized. In addition, problems of quantification are discussed.

Quality and Safety Implications of Emergency Department Information Systems

PubMed Central

Farley, Heather L.; Baumlin, Kevin M.; Hamedani, Azita G.; Cheung, Dickson S.; Edwards, Michael R.; Fuller, Drew C.; Genes, Nicholas; Griffey, Richard T.; Kelly, John J.; McClay, James C.; Nielson, Jeff; Phelan, Michael P.; Shapiro, Jason S.; Stone-Griffith, Suzanne; Pines, Jesse M.

2013-01-01

The Health Information Technology for Economic and Clinical Health Act of 2009 and the Centers for Medicare & Medicaid Services “meaningful use” incentive programs, in tandem with the boundless additional requirements for detailed reporting of quality metrics, have galvanized hospital efforts to implement hospital-based electronic health records. As such, emergency department information systems (EDISs) are an important and unique component of most hospitals’ electronic health records. System functionality varies greatly and affects physician decisionmaking, clinician workflow, communication, and, ultimately, the overall quality of care and patient safety. This article is a joint effort by members of the Quality Improvement and Patient Safety Section and the Informatics Section of the American College of Emergency Physicians. The aim of this effort is to examine the benefits and potential threats to quality and patient safety that could result from the choice of a particular EDIS, its implementation and optimization, and the hospital’s or physician group’s approach to continuous improvement of the EDIS. Specifically, we explored the following areas of potential EDIS safety concerns: communication failure, wrong order–wrong patient errors, poor data display, and alert fatigue. Case studies are presented that illustrate the potential harm that could befall patients from an inferior EDIS product or suboptimal execution of such a product in the clinical environment. The authors have developed 7 recommendations to improve patient safety with respect to the deployment of EDISs. These include ensuring that emergency providers actively participate in selection of the EDIS product, in the design of processes related to EDIS implementation and optimization, and in the monitoring of the system’s ongoing success or failure. Our recommendations apply to emergency departments using any type of EDIS: custom-developed systems, best-of-breed vendor systems, or enterprise systems. PMID:23796627

Drinking Water Management and Governance in Canada: An Innovative Plan-Do-Check-Act (PDCA) Framework for a Safe Drinking Water Supply

NASA Astrophysics Data System (ADS)

Bereskie, Ty; Rodriguez, Manuel J.; Sadiq, Rehan

2017-08-01

Drinking water management in Canada is complex, with a decentralized, three-tiered governance structure responsible for safe drinking water throughout the country. The current approach has been described as fragmented, leading to governance gaps, duplication of efforts, and an absence of accountability and enforcement. Although there have been no major waterborne disease outbreaks in Canada since 2001, a lack of performance improvement, especially in small drinking water systems, is evident. The World Health Organization water safety plan approach for drinking water management represents an alternative preventative management framework to the current conventional, reactive drinking water management strategies. This approach has seen successful implementation throughout the world and has the potential to address many of the issues with drinking water management in Canada. This paper presents a review and strengths-weaknesses-opportunities-threats analysis of drinking water management and governance in Canada at the federal, provincial/territorial, and municipal levels. Based on this analysis, a modified water safety plan (defined as the plan-do-check-act (PDCA)-WSP framework) is proposed, established from water safety plan recommendations and the principles of PDCA for continuous performance improvement. This proposed framework is designed to strengthen current drinking water management in Canada and is designed to fit within and incorporate the existing governance structure.

Drinking Water Management and Governance in Canada: An Innovative Plan-Do-Check-Act (PDCA) Framework for a Safe Drinking Water Supply.

PubMed

Bereskie, Ty; Rodriguez, Manuel J; Sadiq, Rehan

2017-08-01

Drinking water management in Canada is complex, with a decentralized, three-tiered governance structure responsible for safe drinking water throughout the country. The current approach has been described as fragmented, leading to governance gaps, duplication of efforts, and an absence of accountability and enforcement. Although there have been no major waterborne disease outbreaks in Canada since 2001, a lack of performance improvement, especially in small drinking water systems, is evident. The World Health Organization water safety plan approach for drinking water management represents an alternative preventative management framework to the current conventional, reactive drinking water management strategies. This approach has seen successful implementation throughout the world and has the potential to address many of the issues with drinking water management in Canada. This paper presents a review and strengths-weaknesses-opportunities-threats analysis of drinking water management and governance in Canada at the federal, provincial/territorial, and municipal levels. Based on this analysis, a modified water safety plan (defined as the plan-do-check-act (PDCA)-WSP framework) is proposed, established from water safety plan recommendations and the principles of PDCA for continuous performance improvement. This proposed framework is designed to strengthen current drinking water management in Canada and is designed to fit within and incorporate the existing governance structure.

Problems associated with noise measurements in the mining industry

NASA Astrophysics Data System (ADS)

Bauer, Eric R.; Vipperman, Jeffrey S.

2002-05-01

In response to the continuing problem of noise-induced hearing loss (NIHL) among mine workers, the National Institute for Occupational Safety and Health (NIOSH) has been conducting numerous noise- and hearing-loss research efforts in the mining industry. Research is underway to determine worker noise exposure, equipment noise, hearing loss and hearing protection use, and to evaluate engineering controls. Issues that are peculiar to the mining industry have complicated these efforts. A few of the issues that must be overcome to conduct meaningful research include constantly moving equipment, changing work environments, confined space, varying production rates, multiple noise sources, and electronic permissibility of instrumentation. This presentation will address the factors that affect the measurement and analysis of noise in the mining industry and how these factors are managed. In addition, some examples of research results will be included.

49 CFR 385.323 - May FMCSA extend the period under § 385.319(c) for a new entrant to take corrective action to...

Code of Federal Regulations, 2010 CFR

2010-10-01

...) for a new entrant to take corrective action to remedy its safety management practices? 385.323 Section....319(c) for a new entrant to take corrective action to remedy its safety management practices? (a... determines the new entrant is making a good faith effort to remedy its safety management practices. (b) FMCSA...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans

This document outlines the development of a high fidelity, best estimate nuclear power plant severe transient simulation capability that will complement or enhance the integral system codes historically used for licensing and analysis of severe accidents. As with other tools in the Risk Informed Safety Margin Characterization (RISMC) Toolkit, the ultimate user of Enhanced Severe Transient Analysis and Prevention (ESTAP) capability is the plant decision-maker; the deliverable to that customer is a modern, simulation-based safety analysis capability, applicable to a much broader class of safety issues than is traditional Light Water Reactor (LWR) licensing analysis. Currently, the RISMC pathway’s majormore » emphasis is placed on developing RELAP-7, a next-generation safety analysis code, and on showing how to use RELAP-7 to analyze margin from a modern point of view: that is, by characterizing margin in terms of the probabilistic spectra of the “loads” applied to systems, structures, and components (SSCs), and the “capacity” of those SSCs to resist those loads without failing. The first objective of the ESTAP task, and the focus of one task of this effort, is to augment RELAP-7 analyses with user-selected multi-dimensional, multi-phase models of specific plant components to simulate complex phenomena that may lead to, or exacerbate, severe transients and core damage. Such phenomena include: coolant crossflow between PWR assemblies during a severe reactivity transient, stratified single or two-phase coolant flow in primary coolant piping, inhomogeneous mixing of emergency coolant water or boric acid with hot primary coolant, and water hammer. These are well-documented phenomena associated with plant transients but that are generally not captured in system codes. They are, however, generally limited to specific components, structures, and operating conditions. The second ESTAP task is to similarly augment a severe (post-core damage) accident integral analyses code with high fidelity simulations that would allow investigation of multi-dimensional, multi-phase containment phenomena that are only treated approximately in established codes.« less

Flight Data Entry, Descent, and Landing (EDL) Repository

NASA Technical Reports Server (NTRS)

Martinez, Elmain M.; Winterhalter, Daniel

2012-01-01

Dr. Daniel Winterhalter, NASA Engineering and Safety Center Chief Engineer at the Jet Propulsion Laboratory, requested the NASA Engineering and Safety Center sponsor a 3-year effort to collect entry, descent, and landing material and to establish a NASA-wide archive to serve the material. The principle focus of this task was to identify entry, descent, and landing repository material that was at risk of being permanently lost due to damage, decay, and undocumented storage. To provide NASA-wide access to this material, a web-based digital archive was created. This document contains the outcome of the effort.

Group interaction and flight crew performance

NASA Technical Reports Server (NTRS)

Foushee, H. Clayton; Helmreich, Robert L.

1988-01-01

The application of human-factors analysis to the performance of aircraft-operation tasks by the crew as a group is discussed in an introductory review and illustrated with anecdotal material. Topics addressed include the function of a group in the operational environment, the classification of group performance factors (input, process, and output parameters), input variables and the flight crew process, and the effect of process variables on performance. Consideration is given to aviation safety issues, techniques for altering group norms, ways of increasing crew effort and coordination, and the optimization of group composition.

Safety Assessment for the Kozloduy National Disposal Facility in Bulgaria - 13507

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biurrun, E.; Haverkamp, B.; Lazaro, A.

2013-07-01

Due to the early decommissioning of four Water-Water Energy Reactors (WWER) 440-V230 reactors at the Nuclear Power Plant (NPP) near the city of Kozloduy in Bulgaria, large amounts of low and intermediate radioactive waste will arise much earlier than initially scheduled. In or-der to manage the radioactive waste from the early decommissioning, Bulgaria has intensified its efforts to provide a near surface disposal facility at Radiana with the required capacity. To this end, a project was launched and assigned in international competition to a German-Spanish consortium to provide the complete technical planning including the preparation of the Intermediate Safety Assessmentmore » Report. Preliminary results of operational and long-term safety show compliance with the Bulgarian regulatory requirements. The long-term calculations carried out for the Radiana site are also a good example of how analysis of safety assessment results can be used for iterative improvements of the assessment by pointing out uncertainties and areas of future investigations to reduce such uncertainties in regard to the potential radiological impact. The computer model used to estimate the long-term evolution of the future repository at Radiana predicted a maximum total annual dose for members of the critical group, which is carried to approximately 80 % by C-14 for a specific ingestion pathway. Based on this result and the outcome of the sensitivity analysis, existing uncertainties were evaluated and areas for reasonable future investigations to reduce these uncertainties were identified. (authors)« less

Matching Traffic Safety Strategies to Youth Characteristics: A Literature Review of Cognitive Development

DOT National Transportation Integrated Search

1998-09-01

In an effort to reduce the high crash rate and resulting injuries of young drivers, the National Highway Traffic Safety Administration has sponsored research to assess the factors responsible for this heightened crash risk and to determine the implic...

Matching traffic safety strategies to youth characteristics : a literature review of cognitive development

DOT National Transportation Integrated Search

1998-09-01

In an effort to reduce the high crash rate and resulting injuries of young drivers, the National Highway Traffic Safety Administration has sponsored research to assess the factors responsible for this heightened crash risk and to determine the implic...

Watch Your Step

ERIC Educational Resources Information Center

Kelley, Scott

2007-01-01

Schools and universities looking to be safer and prevent accidents should review their pedestrian-safety efforts. Over the last several years, a variety of research has assessed the effectiveness of pedestrian-safety programs. In one study, researchers found that marked crosswalks had no effect on reducing pedestrian accidents. Even more…

NASA aviation safety program aircraft engine health management data mining tools roadmap

DOT National Transportation Integrated Search

2000-04-01

Aircraft Engine Health Management Data Mining Tools is a project led by NASA Glenn Research Center in support of the NASA Aviation Safety Program's Aviation System Monitoring and Modeling Thrust. The objective of the Glenn-led effort is to develop en...

Impact of edge lines on safety of rural two-lane highways.

DOT National Transportation Integrated Search

2005-10-01

This report documents the results of the project for Impact of Edge Lines on Safety of Rural Two Lane Highways. This research project was initiated in the effort of compliance with the updated version of the Manual on Uniform Traffic Control De...

Promoting Health and Safety. Skills for Independent Living.

ERIC Educational Resources Information Center

Agran, Martin, Ed.; And Others

This guidebook provides behavioral-instructional strategies for teaching essential personal safety skills and promoting overall well-being to persons with developmental disabilities. Case studies demonstrate these strategies in practice, and detailed curriculum goals are included to guide intervention efforts. To ensure that learners both…

75 FR 21602 - Online Safety and Technology Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

School Safety: A Collaborative Effort.

ERIC Educational Resources Information Center

ERIC Review, 2000

2000-01-01

The "ERIC Review" announces research results, publications, and new programs relevant to each issue's theme topic. This issue focuses on school safety and violence prevention. An introductory section includes two articles: "How Safe Is My Child's School?" (Kevin Mitchell) and "Making America's Schools Safer" (U.S.…

EFFECTIVENESS AND SAFETY OF STRATEGIES FOR OIL SPILL BIOREMEDIATION: POTENTIAL AND LIMITATION, LABORATORY TO FIELD (RESEARCH BRIEF)

EPA Science Inventory

Several important additional research efforts were identified during the development of test systems and protocols for assessing the effectiveness and environmental safety of oil spill commercial bioremediation agents (CBAs). Research that examined CBA efficacy issues included: (...

49 CFR 350.301 - What level of effort must a State maintain to qualify for MCSAP funding?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false What level of effort must a State maintain to... What level of effort must a State maintain to qualify for MCSAP funding? (a) The State must maintain... funds and State matching funds, for CMV safety programs eligible for funding under this part at a level...

49 CFR 350.301 - What level of effort must a State maintain to qualify for MCSAP funding?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What level of effort must a State maintain to... What level of effort must a State maintain to qualify for MCSAP funding? (a) The State must maintain... funds and State matching funds, for CMV safety programs eligible for funding under this part at a level...

Intelligent behaviors through vehicle-to-vehicle and vehicle-to-infrastructure communication

NASA Astrophysics Data System (ADS)

Garcia, Richard D.; Sturgeon, Purser; Brown, Mike

2012-06-01

The last decade has seen a significant increase in intelligent safety devices on private automobiles. These devices have both increased and augmented the situational awareness of the driver and in some cases provided automated vehicle responses. To date almost all intelligent safety devices have relied on data directly perceived by the vehicle. This constraint has a direct impact on the types of solutions available to the vehicle. In an effort to improve the safety options available to a vehicle, numerous research laboratories and government agencies are investing time and resources into connecting vehicles to each other and to infrastructure-based devices. This work details several efforts in both the commercial vehicle and the private auto industries to increase vehicle safety and driver situational awareness through vehicle-to-vehicle and vehicle-to-infrastructure communication. It will specifically discuss intelligent behaviors being designed to automatically disable non-compliant vehicles, warn tractor trailer vehicles of unsafe lane maneuvers such as lane changes, passing, and merging, and alert drivers to non-line-of-sight emergencies.

Patient Safety and the Malpractice System.

PubMed

Swift, James Q

2017-05-01

The cost of health care in the United States and malpractice insurance has escalated greatly over the past 30 years. In an ideal world, the goals of the tort system would be aligned with efforts at improving safety. In fact, there is little evidence that the tort system and the processes of risk management and informed consent have improved patient safety. This article explores the disunion between patient safety and the malpractice system. Copyright © 2016 Elsevier Inc. All rights reserved.

System safety engineering in the development of advanced surface transportation vehicles

NASA Technical Reports Server (NTRS)

Arnzen, H. E.

1971-01-01

Applications of system safety engineering to the development of advanced surface transportation vehicles are described. As a pertinent example, the paper describes a safety engineering efforts tailored to the particular design and test requirements of the Tracked Air Cushion Research Vehicle (TACRV). The test results obtained from this unique research vehicle provide significant design data directly applicable to the development of future tracked air cushion vehicles that will carry passengers in comfort and safety at speeds up to 300 miles per hour.

Applying principles from safety science to improve child protection.

PubMed

Cull, Michael J; Rzepnicki, Tina L; O'Day, Kathryn; Epstein, Richard A

2013-01-01

Child Protective Services Agencies (CPSAs) share many characteristics with other organizations operating in high-risk, high-profile industries. Over the past 50 years, industries as diverse as aviation, nuclear power, and healthcare have applied principles from safety science to improve practice. The current paper describes the rationale, characteristics, and challenges of applying concepts from the safety culture literature to CPSAs. Preliminary efforts to apply key principles aimed at improving child safety and well-being in two states are also presented.

Hazardous material transportation safety and security field operational test beta test and baseline data report : executive summary

DOT National Transportation Integrated Search

2003-10-29

The Beta Test and Baseline Data Collection efforts ensured that the test technologies would successfully operate during the field operational test (FOT) in the designed scenario configurations. These efforts also ensured that FOT systems would succes...

Four Generations of Maintenance Resource Management Programs in the United States: An Analysis of the Past, Present, and Future

NASA Technical Reports Server (NTRS)

Taylor, James C.; Patankar, Manoj S.

2001-01-01

This paper analyzes four generations of Maintenance Resource Management (MRM) programs implemented by aviation maintenance organizations in the United States. Data collected from over ten years of survey research and field observations are used for this analysis; they are presented in a case-study format. The first three generations of MRM programs were episodic efforts to increase safety through teamwork, focus group discussions, and awareness courses, respectively. Now, the fourth generation programs, characterized by a commitment to long-term communication and behavioral changes in maintenance, are set to build on those earlier generations, toward a culture of mutual trust between mechanics, their managers, and regulators.

The role of adverse events and related safety data in the pre-market evaluation of drug abuse potential.

PubMed

Mansbach, Robert S; Schoedel, Kerri A; Kittrelle, Jeffrey P; Sellers, Edward M

2010-12-01

The scientific and regulatory assessment of abuse and dependence potential of drugs involves a multi-layered evaluation of its properties related to chemistry, formulation, pharmacology, animal behavior and clinical response. In addition to the primary laboratory-based assessment in experienced drug users, data are also reviewed from studies in healthy volunteers and in the patient population. Much of the emphasis in these latter studies is placed on adverse events that are reported by the subject or observed by the investigator. Unlike other aspects of abuse potential assessment, the evaluation of abuse- and dependence-related events has not been the subject of scholarly research. The present commentary presents recommendations for several areas that would benefit from a consensus review to result in greater standardization for the analysis and presentation of abuse- and dependence-related data from clinical trials. These include special investigator training, a system of weighted primary and secondary terms, adjudication of individual events, case report management, organization of integrated safety data, and protocols for drug accountability. Such an effort would aid in implementing the evolving efforts of health authorities to guide drug developers in the collection and presentation of data needed for the regulation of drugs with the potential for abuse and dependence. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

A controlled evaluation of the WHO Safe Communities model approach to injury prevention: increasing child restraint use in motor vehicles.

PubMed

Istre, Gregory R; Stowe, Martha; McCoy, Mary A; Moore, Billy J; Culica, Dan; Womack, Katie N; Anderson, Ron J

2011-02-01

To measure the effect of the WHO Safe Communities model approach to increasing child restraint use in motor vehicles. Pre- and post-intervention observations of restraint use in motor vehicles in several sites in the target area, and in a comparison area community. Community; southeast Dallas, Texas, 2003-2005. A multifaceted approach to increasing use of child safety seats, booster seats and seat belts that included efforts in schools, day care centres, neighbourhoods and a local public clinic, along with child safety seat classes and a low-cost distribution programme. Prevalence of restraint use among children 0-8 years old riding in motor vehicles. In the target area, the adjusted child restraint use increased by 23.9 percentage points versus 11.8 in the comparison area (difference 12.1; 95% CI 9.9 to 14.3), and adjusted driver seat belt use increased by 16.3 percentage points in the target area versus 4.9 in the comparison area (difference 11.4; 95% CI 11.0 to 11.7). Multivariable multilevel analysis showed that the increase in the target area was significantly greater than in the comparison area for child restraint use (OR 1.6; 95% CI 1.2 to 2.2), as well as for driver seat belt use and proportion of children riding in the back seat. The Safe Communities approach was successful in promoting the use of child restraints in motor vehicles through a multifaceted intervention that included efforts in various community settings, instructional classes and child safety seat distribution.

Cybersecurity: The Nation’s Greatest Threat to Critical Infrastructure

DTIC Science & Technology

2013-03-01

protection has become a matter of national security, public safety, and economic stability . It is imperative the U.S. Government (USG) examine current...recommendations for federal responsibilities and legislation to direct nation critical infrastructure efforts to ensure national security, public safety and economic stability .

Evaluating Amtrak's S2S: Are Recorded Injury Rates Showing Actual Injury Rates?

DOT National Transportation Integrated Search

2017-08-01

Since 2009, Amtrak has been engaged in unprecedented efforts to advance its safety processes and improve the safety culture of the entire corporation, including establishing a peer-to-peer feedback process, known as the Safe-2-Safer program. FRA is c...

Fire Safety Training Handbook.

ERIC Educational Resources Information Center

Montgomery County Dept. of Fire and Rescue Services, Rockville, MD. Div. of Fire Prevention.

Designed for a community fire education effort, particularly in which local volunteers present general information on fire safety to their fellow citizens, this workbook contains nine lessons. Included are an overview of the household fire problem; instruction in basic chemistry and physics of fire, flammable liquids, portable fire extinguishers,…

Collaboration with the Local Community.

ERIC Educational Resources Information Center

Jackson, Michael L.; Cherrey, Cynthia

2002-01-01

Colleges and universities continually search for ways to enhance the safety and security of their educational programs and physical plant. This article examines how the University of Southern California and other institutions are using collaborative efforts with the local community to enhance their mutual safety and security through dynamic…

Strategies to reduce driving under the influence of alcohol.

PubMed

DeJong, W; Hingson, R

1998-01-01

The purpose of this review is to update research on the prevention of alcohol-related traffic deaths since the 1988 Surgeon General's Workshop on Drunk Driving. Four primary areas of research are reviewed here: (a) general deterrence policies, (b) alcohol control policies, (c) mass communications campaigns, including advertising restrictions, and (d) community traffic safety programs. Modern efforts to combat drunk driving in the United States began with specific deterrence strategies to punish convicted drunk drivers, and then evolved to include general deterrence strategies that were targeted to the population as a whole. Efforts next expanded to include the alcohol side of the problem, with measures installed to decrease underage drinking and excessive alcohol consumption. In the next several years, greater efforts are needed on all these fronts. Also needed, however, are programs that integrate drunk driving prevention with other traffic safety initiatives.

SHARP pre-release v1.0 - Current Status and Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahadevan, Vijay S.; Rahaman, Ronald O.

The NEAMS Reactor Product Line effort aims to develop an integrated multiphysics simulation capability for the design and analysis of future generations of nuclear power plants. The Reactor Product Line code suite’s multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. In this report, building on a several previous report issued in September 2014, we describe our continued efforts to integrate thermal/hydraulics, neutronics, and structural mechanics modeling codes to perform coupled analysis of a representativemore » fast sodium-cooled reactor core in preparation for a unified release of the toolkit. The work reported in the current document covers the software engineering aspects of managing the entire stack of components in the SHARP toolkit and the continuous integration efforts ongoing to prepare a release candidate for interested reactor analysis users. Here we report on the continued integration effort of PROTEUS/Nek5000 and Diablo into the NEAMS framework and the software processes that enable users to utilize the capabilities without losing scientific productivity. Due to the complexity of the individual modules and their necessary/optional dependency library chain, we focus on the configuration and build aspects for the SHARP toolkit, which includes capability to autodownload dependencies and configure/install with optimal flags in an architecture-aware fashion. Such complexity is untenable without strong software engineering processes such as source management, source control, change reviews, unit tests, integration tests and continuous test suites. Details on these processes are provided in the report as a building step for a SHARP user guide that will accompany the first release, expected by Mar 2016.« less

Comparative analysis of numerical models of pipe handling equipment used in offshore drilling applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlus, Witold, E-mail: witold.p.pawlus@ieee.org; Ebbesen, Morten K.; Hansen, Michael R.

Design of offshore drilling equipment is a task that involves not only analysis of strict machine specifications and safety requirements but also consideration of changeable weather conditions and harsh environment. These challenges call for a multidisciplinary approach and make the design process complex. Various modeling software products are currently available to aid design engineers in their effort to test and redesign equipment before it is manufactured. However, given the number of available modeling tools and methods, the choice of the proper modeling methodology becomes not obvious and – in some cases – troublesome. Therefore, we present a comparative analysis ofmore » two popular approaches used in modeling and simulation of mechanical systems: multibody and analytical modeling. A gripper arm of the offshore vertical pipe handling machine is selected as a case study for which both models are created. In contrast to some other works, the current paper shows verification of both systems by benchmarking their simulation results against each other. Such criteria as modeling effort and results accuracy are evaluated to assess which modeling strategy is the most suitable given its eventual application.« less

Factors Associated With Barcode Medication Administration Technology That Contribute to Patient Safety: An Integrative Review.

PubMed

Strudwick, Gillian; Reisdorfer, Emilene; Warnock, Caroline; Kalia, Kamini; Sulkers, Heather; Clark, Carrie; Booth, Richard

In an effort to prevent medication errors, barcode medication administration technology has been implemented in many health care organizations. An integrative review was conducted to understand the effect of barcode medication administration technology on medication errors, and characteristics of use demonstrated by nurses contribute to medication safety. Addressing poor system use may support improved patient safety through the reduction of medication administration errors.

The NHTSA & NCSDR program to combat drowsy driving : a report to the House and Senate Appropriations Committees describing collaboration between National Highway Traffic Safety Administration and National Center on Sleep Disorders Research, National Heart, Lung and Blood Institute, National Institutes of Health

DOT National Transportation Integrated Search

1999-03-15

In 1996, the National Highway Traffic Safety Administration (NHTSA) embarked on a congressionally mandated effort to develop educational countermeasures to the effects of fatigue, sleep disorders, and inattention on highway safety. In collaboration w...

A Recipe for Success OSHA VPP and Wellness

NASA Technical Reports Server (NTRS)

Keprta, Sean

2010-01-01

This slide presentation reviews the Voluntary Protection Program (VPP) which is a program to promote effective worksite-based safety and health. In the VPP, management, labor, and OSHA establish cooperative relationships at workplaces that have implemented a comprehensive safety and health management system. The history of JSC's Total Health program and the movement from the Safety and Total Health program and the efforts to become certified by OSHA is reviewed.

Association between health worker motivation and healthcare quality efforts in Ghana.

PubMed

Alhassan, Robert Kaba; Spieker, Nicole; van Ostenberg, Paul; Ogink, Alice; Nketiah-Amponsah, Edward; de Wit, Tobias F Rinke

2013-08-14

Ghana is one of the sub-Saharan African countries making significant progress towards universal access to quality healthcare. However, it remains a challenge to attain the 2015 targets for the health related Millennium Development Goals (MDGs) partly due to health sector human resource challenges including low staff motivation. This paper addresses indicators of health worker motivation and assesses associations with quality care and patient safety in Ghana. The aim is to identify interventions at the health worker level that contribute to quality improvement in healthcare facilities. The study is a baseline survey of health workers (n = 324) in 64 primary healthcare facilities in two regions in Ghana. Data collection involved quality care assessment using the SafeCare Essentials tool, the National Health Insurance Authority (NHIA) accreditation data and structured staff interviews on workplace motivating factors. The Spearman correlation test was conducted to test the hypothesis that the level of health worker motivation is associated with level of effort by primary healthcare facilities to improve quality care and patient safety. The quality care situation in health facilities was generally low, as determined by the SafeCare Essentials tool and NHIA data. The majority of facilities assessed did not have documented evidence of processes for continuous quality improvement and patient safety. Overall, staff motivation appeared low although workers in private facilities perceived better working conditions than workers in public facilities (P <0.05). Significant positive associations were found between staff satisfaction levels with working conditions and the clinic's effort towards quality improvement and patient safety (P <0.05). As part of efforts towards attainment of the health related MDGs in Ghana, more comprehensive staff motivation interventions should be integrated into quality improvement strategies especially in government-owned healthcare facilities where working conditions are perceived to be the worst.

Optimizing Quality of Care and Patient Safety in Malaysia: The Current Global Initiatives, Gaps and Suggested Solutions.

PubMed

Jarrar, Mu'taman; Abdul Rahman, Hamzah; Don, Mohammad Sobri

2015-10-20

Demand for health care service has significantly increased, while the quality of healthcare and patient safety has become national and international priorities. This paper aims to identify the gaps and the current initiatives for optimizing the quality of care and patient safety in Malaysia. Review of the current literature. Highly cited articles were used as the basis to retrieve and review the current initiatives for optimizing the quality of care and patient safety. The country health plan of Ministry of Health (MOH) Malaysia and the MOH Malaysia Annual Reports were reviewed. The MOH has set four strategies for optimizing quality and sustaining quality of life. The 10th Malaysia Health Plan promotes the theme "1 Care for 1 Malaysia" in order to sustain the quality of care. Despite of these efforts, the total number of complaints received by the medico-legal section of the MOH Malaysia is increasing. The current global initiatives indicted that quality performance generally belong to three main categories: patient; staffing; and working environment related factors. There is no single intervention for optimizing quality of care to maintain patient safety. Multidimensional efforts and interventions are recommended in order to optimize the quality of care and patient safety in Malaysia.

Optimizing Quality of Care and Patient Safety in Malaysia: The Current Global Initiatives, Gaps and Suggested Solutions

PubMed Central

Jarrar, Mu’taman; Rahman, Hamzah Abdul; Don, Mohammad Sobri

2016-01-01

Background and Objective: Demand for health care service has significantly increased, while the quality of healthcare and patient safety has become national and international priorities. This paper aims to identify the gaps and the current initiatives for optimizing the quality of care and patient safety in Malaysia. Design: Review of the current literature. Highly cited articles were used as the basis to retrieve and review the current initiatives for optimizing the quality of care and patient safety. The country health plan of Ministry of Health (MOH) Malaysia and the MOH Malaysia Annual Reports were reviewed. Results: The MOH has set four strategies for optimizing quality and sustaining quality of life. The 10th Malaysia Health Plan promotes the theme “1 Care for 1 Malaysia” in order to sustain the quality of care. Despite of these efforts, the total number of complaints received by the medico-legal section of the MOH Malaysia is increasing. The current global initiatives indicted that quality performance generally belong to three main categories: patient; staffing; and working environment related factors. Conclusions: There is no single intervention for optimizing quality of care to maintain patient safety. Multidimensional efforts and interventions are recommended in order to optimize the quality of care and patient safety in Malaysia. PMID:26755459

Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US

PubMed Central

Cunningham, Thomas R.; Sinclair, Raymond

2015-01-01

Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries’ planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator–intermediary–small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system. PMID:26300585

Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US.

PubMed

Cunningham, Thomas R; Sinclair, Raymond

2015-01-01

Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries' planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator-intermediary-small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system.

LGBTQ-Inclusive Curricula: Why Supportive Curricula Matter

ERIC Educational Resources Information Center

Snapp, Shannon D.; McGuire, Jenifer K.; Sinclair, Katarina O.; Gabrion, Karlee; Russell, Stephen T.

2015-01-01

There is growing attention to lesbian, gay, bisexual, transgender, queer and questioning (LGBTQ) issues in schools, including efforts to address such issues through the curriculum. This study examines whether students' perceptions of personal safety and school climate safety are stronger when curricula that include LGBTQ people are present and…

With Immigrants, Districts Balance Safety, Legalities

ERIC Educational Resources Information Center

Zehr, Mary Ann

2007-01-01

In this article, the author discusses attempts by schools to navigate stepped-up federal efforts to curb illegal immigration, protection of student privacy, and the safety of students during enforcement operations. In Albuquerque and Santa Fe, New Mexico, for example, school personnel are barred from putting information about a child's immigration…

School Safety Handbook. Revised.

ERIC Educational Resources Information Center

Association of School Business Officials International, Reston, VA.

The revised edition of this handbook represents a concerted effort to bring school safety to the forefront of business managers' daily and long-range planning activities. Although statistics show few fatalities on school grounds, schools appear to have a high frequency and incident rate of nonfatal injuries. According to the introduction, school…

Managing pedestrian safety II : A case-control study of collision locations on state routes in King County and Seattle, Washington

DOT National Transportation Integrated Search

2008-01-01

The safety of non-motorized transportation systems is essential to the public acceptance and overall success of Washington State's and local jurisdictions' efforts to reduce congestion. The State's and the jurisdictions' goals to increase non-SOV (si...

A Safety Handbook for Science Teachers.

ERIC Educational Resources Information Center

Everett, K.; Jenkins, E. W.

This publication is a safety handbook designed for science teachers of elementary and secondary schools. In an effort to insure prevention of accidents in school laboratories, it advocates careful planning, adequate experimental design, and the acquisition of correct laboratory techinques on the part of the teacher. The handbook gives instructions…

The New Zealand Model for Prevention of Cyberviolence.

ERIC Educational Resources Information Center

Butterfield, Liz

2003-01-01

Describes the national initiative of the New Zealand Internet Safety Group to prevent cyberviolence through education. The effort includes distribution of an Internet Safety Kit to each school in the country, research on Internet use in New Zealand, and a national symposium on the social impact of the Internet. (SLD)

78 FR 10685 - Reports, Forms, and Recordkeeping Requirements: Agency Information Collection Activity Under OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

... Traffic Safety Administration Title: Tire Pressure Monitoring Systems Special Studies. OMB Number: 2174...: Improperly inflated tires pose a safety risk, increasing the chance of skidding, hydroplaning, longer stopping distances, and crashes due to flat tires and blowouts. In an effort to decrease the number of...

Bicycle Safety: A Balancing Act.

ERIC Educational Resources Information Center

Cinque, Chris

1989-01-01

In an effort to reduce deaths and serious injuries among bicyclists, physicians and bicycling organizations are promoting safety skill classes. Children are at especially high risk of accidents and need proper training and education. Helmets and other protective gear are considered crucial equipment, and common sense and alertness are important.…

MO-F-16A-04: Case Study: Estimation of Peak Skin Dose Following a Physician Reported “High Dose” Case and Sentinel Event Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Supanich, M; Chu, J; Wehmeyer, A

2014-06-15

Purpose: This work offers as a teaching example a reported high dose fluoroscopy case and the workflow the institution followed to self-report a radiation overdose sentinel event to the Joint Commission. Methods: Following the completion of a clinical case in a hybrid OR room with a reported air kerma of >18 Gy at the Interventional Reference Point (IRP) the physicians involved in the case referred study to the institution's Radiation Safety Committee (RSC) for review. The RSC assigned a Diagnostic Medical Physicist (DMP) to estimate the patient's Peak Skin Dose (PSD) and analyze the case. Following the DMP's analysis andmore » estimate of a PSD of >15 Gy the institution's adverse event committee was convened to discuss the case and to self-report the case as a radiation overdose sentinel event to the Joint Commission. The committee assigned a subgroup to perform the root cause analysis and develop institutional responses to the event. Results: The self-reporting of the sentinel event and the associated root cause analysis resulted in several institutional action items that are designed to improve process and safety. A formal reporting and analysis mechanism was adopted to review fluoroscopy cases with air kerma greater than 6 Gy at the IRP. An improved and formalized radiation safety training program for physicians using fluoroscopy equipment was implemented. Additionally efforts already under way to monitor radiation exposure in the Radiology department were expanded to include all fluoroscopy equipment capable of automated dose reporting. Conclusion: The adverse event review process and the root cause analysis following the self-reporting of the sentinel event resulted in policies and procedures that are expected to improve the quality and safe usage of fluoroscopy throughout the institution.« less

Injury prevention counselling to improve safety practices by parents in Mexico.

PubMed Central

Mock, Charles; Arreola-Risa, Carlos; Trevino-Perez, Rodolfo; Almazan-Saavedra, Victoria; Zozaya-Paz, Jaime E.; Gonzalez-Solis, Reynaldo; Simpson, Kate; Rodriguez-Romo, Laura; Hernandez-Torre, Martin H.

2003-01-01

OBJECTIVES: To evaluate the effectiveness of educational counselling programmes aimed at increasing parents' practice of childhood safety in Monterrey, Mexico, and to provide information aimed at helping to improve the effectiveness of future efforts in this field. METHODS: Three different counselling programmes were designed to meet the needs of the upper, middle and lower socioeconomic strata. Evaluation involved the use of baseline questionnaires on parents' existing safety-related practices for intervention and control groups and the administration of corresponding questionnaires after the programmes had been carried out. FINDINGS: Data were obtained on 1124 children before counselling took place and on 625 after it had been given. Overall safety scores (% safe responses) increased from 54% and 65% for the lower and upper socioeconomic strata, respectively, before counselling to 62% and 73% after counselling (P <0.001 for all groups). Improvements occurred both for activities that required caution and for activities that required the use of safety-related devices (e.g. helmets, car seats). However, scores for the use of such devices remained suboptimal even after counselling and there were wide discrepancies between the socioeconomic strata. The post-counselling scores for the use of safety-related devices were 55%, 38% and 19% for the upper, middle and lower socioeconomic strata, respectively. CONCLUSIONS: Brief educational interventions targeting parents' practice of childhood safety improved safe behaviours. Increased attention should be given to specific safety-related devices and to the safety of pedestrians. Educational efforts should be combined with other strategies for injury prevention, such as the use of legislation and the improvement of environmental conditions. PMID:14576891

The road against fatalities: infrastructure spending vs. regulation??

PubMed

Albalate, Daniel; Fernández, Laura; Yarygina, Anastasiya

2013-10-01

The road safety literature is typified by a high degree of compartmentalization between studies that focus on infrastructure and traffic conditions and those devoted to the evaluation of public policies and regulations. As a result, few studies adopt a unified empirical framework in their attempts at evaluating the road safety performance of public interventions, thus limiting our understanding of successful strategies in this regard. This paper considers both types of determinants in an analysis of a European country that has enjoyed considerable success in reducing road fatalities. After constructing a panel data set with road safety outcomes for all Spanish provinces between 1990 and 2009, we evaluate the role of the technical characteristics of infrastructure and recent infrastructure spending together with the main regulatory changes introduced. Our results show the importance of considering both types of determinants in a unified framework. Moreover, we highlight the importance of maintenance spending given its effectiveness in reducing fatalities and casualties in the current economic context of austerity that is having such a marked impact on investment efforts in Spain. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Toxic Truth About Carbon Nanotubes in Water Purification: a Perspective View.

PubMed

Das, Rasel; Leo, Bey Fen; Murphy, Finbarr

2018-06-18

Without nanosafety guidelines, the long-term sustainability of carbon nanotubes (CNTs) for water purifications is questionable. Current risk measurements of CNTs are overshadowed by uncertainties. New risks associated with CNTs are evolving through different waste water purification routes, and there are knowledge gaps in the risk assessment of CNTs based on their physical properties. Although scientific efforts to design risk estimates are evolving, there remains a paucity of knowledge on the unknown health risks of CNTs. The absence of universal CNT safety guidelines is a specific hindrance. In this paper, we close these gaps and suggested several new risk analysis roots and framework extrapolations from CNT-based water purification technologies. We propose a CNT safety clock that will help assess risk appraisal and management. We suggest that this could form the basis of an acceptable CNT safety guideline. We pay particular emphasis on measuring risks based on CNT physico-chemical properties such as diameter, length, aspect ratio, type, charge, hydrophobicity, functionalities and so on which determine CNT behaviour in waste water treatment plants and subsequent release into the environment.

Safety and Mission Assurance for In-House Design Lessons Learned from Ares I Upper Stage

NASA Technical Reports Server (NTRS)

Anderson, Joel M.

2011-01-01

This viewgraph presentation identifies lessons learned in the course of the Ares I Upper Stage design and in-house development effort. The contents include: 1) Constellation Organization; 2) Upper Stage Organization; 3) Presentation Structure; 4) Lesson-Importance of Systems Engineering/Integration; 5) Lesson-Importance of Early S&MA Involvement; 6) Lesson-Importance of Appropriate Staffing Levels; 7) Lesson-Importance S&MA Team Deployment; 8) Lesson-Understanding of S&MA In-Line Engineering versus Assurance; 9) Lesson-Importance of Close Coordination between Supportability and Reliability/Maintainability; 10) Lesson-Importance of Engineering Data Systems; 11) Lesson-Importance of Early Development of Supporting Databases; 12) Lesson-Importance of Coordination with Safety Assessment/Review Panels; 13) Lesson-Implementation of Software Reliability; 14) Lesson-Implementation of S&MA Technical Authority/Chief S&MA Officer; 15) Lesson-Importance of S&MA Evaluation of Project Risks; 16) Lesson-Implementation of Critical Items List and Government Mandatory Inspections; 17) Lesson-Implementation of Critical Items List Mandatory Inspections; 18) Lesson-Implementation of Test Article Safety Analysis; and 19) Lesson-Importance of Procurement Quality.

Visualising differences in professionals' perspectives on quality and safety.

PubMed

Travaglia, Joanne Francis; Nugus, Peter Ivan; Greenfield, David; Westbrook, Johanna Irene; Braithwaite, Jeffrey

2012-09-01

The safety-and-quality movement is now two decades old. Errors persist despite best efforts, indicating that there are entrenched overt and perhaps less explicit barriers limiting the success of improvement efforts. OBJECTIVES AND HYPOTHESES: To examine the perspectives of five groups of healthcare workers (administrative staff, nurses, medical practitioners, allied health and managers) and to compare and contrast their descriptions of quality-and-safety activities within their organisation. Differences in perspectives can be an indicator of divergence in the conceptualisation of, and impetus for, quality-improvement strategies which are intended to engage healthcare professions and staff. Study data were collected in a defined geographical healthcare jurisdiction in Australia, via individual and group interviews held across four service streams (aged care and rehabilitation; mental health; community health; and cancer services). Data were collected in 2008 and analysed, using data-mining software, in 2009. Clear differences in the perspectives of professional groups were evident, suggesting variations in the perceptions of, and priorities for, quality and safety. The visual representation of quality and safety perspectives provides insights into the conceptual maps currently utilised by healthcare workers. Understanding the similarity and differences in these maps may enable more effective targeting of interprofessional improvement strategies.

Consumer Product Data for Exposure Screening, Modeling and Prioritization, and Risk-based Decision Making

EPA Science Inventory

This presentation will provide an overview of the research efforts underway in EPA ORD's Chemicals for Safety and Sustainability research program which relate to providing information to prioritize chemicals in consumer products based on risk. It also describes effort to make dat...

Statistical Process Control for KSC Processing

NASA Technical Reports Server (NTRS)

Ford, Roger G.; Delgado, Hector; Tilley, Randy

1996-01-01

The 1996 Summer Faculty Fellowship Program and Kennedy Space Center (KSC) served as the basis for a research effort into statistical process control for KSC processing. The effort entailed several tasks and goals. The first was to develop a customized statistical process control (SPC) course for the Safety and Mission Assurance Trends Analysis Group. The actual teaching of this course took place over several weeks. In addition, an Internet version of the same course complete with animation and video excerpts from the course when it was taught at KSC was developed. The application of SPC to shuttle processing took up the rest of the summer research project. This effort entailed the evaluation of SPC use at KSC, both present and potential, due to the change in roles for NASA and the Single Flight Operations Contractor (SFOC). Individual consulting on SPC use was accomplished as well as an evaluation of SPC software for KSC use in the future. A final accomplishment of the orientation of the author to NASA changes, terminology, data format, and new NASA task definitions will allow future consultation when the needs arise.

Risk-Significant Adverse Condition Awareness Strengthens Assurance of Fault Management Systems

NASA Technical Reports Server (NTRS)

Fitz, Rhonda

2017-01-01

As spaceflight systems increase in complexity, Fault Management (FM) systems are ranked high in risk-based assessment of software criticality, emphasizing the importance of establishing highly competent domain expertise to provide assurance. Adverse conditions (ACs) and specific vulnerabilities encountered by safety- and mission-critical software systems have been identified through efforts to reduce the risk posture of software-intensive NASA missions. Acknowledgement of potential off-nominal conditions and analysis to determine software system resiliency are important aspects of hazard analysis and FM. A key component of assuring FM is an assessment of how well software addresses susceptibility to failure through consideration of ACs. Focus on significant risk predicted through experienced analysis conducted at the NASA Independent Verification & Validation (IV&V) Program enables the scoping of effective assurance strategies with regard to overall asset protection of complex spaceflight as well as ground systems. Research efforts sponsored by NASAs Office of Safety and Mission Assurance (OSMA) defined terminology, categorized data fields, and designed a baseline repository that centralizes and compiles a comprehensive listing of ACs and correlated data relevant across many NASA missions. This prototype tool helps projects improve analysis by tracking ACs and allowing queries based on project, mission type, domain/component, causal fault, and other key characteristics. Vulnerability in off-nominal situations, architectural design weaknesses, and unexpected or undesirable system behaviors in reaction to faults are curtailed with the awareness of ACs and risk-significant scenarios modeled for analysts through this database. Integration within the Enterprise Architecture at NASA IV&V enables interfacing with other tools and datasets, technical support, and accessibility across the Agency. This paper discusses the development of an improved workflow process utilizing this database for adaptive, risk-informed FM assurance that critical software systems will safely and securely protect against faults and respond to ACs in order to achieve successful missions.

Risk-Significant Adverse Condition Awareness Strengthens Assurance of Fault Management Systems

NASA Technical Reports Server (NTRS)

Fitz, Rhonda

2017-01-01

As spaceflight systems increase in complexity, Fault Management (FM) systems are ranked high in risk-based assessment of software criticality, emphasizing the importance of establishing highly competent domain expertise to provide assurance. Adverse conditions (ACs) and specific vulnerabilities encountered by safety- and mission-critical software systems have been identified through efforts to reduce the risk posture of software-intensive NASA missions. Acknowledgement of potential off-nominal conditions and analysis to determine software system resiliency are important aspects of hazard analysis and FM. A key component of assuring FM is an assessment of how well software addresses susceptibility to failure through consideration of ACs. Focus on significant risk predicted through experienced analysis conducted at the NASA Independent Verification Validation (IVV) Program enables the scoping of effective assurance strategies with regard to overall asset protection of complex spaceflight as well as ground systems. Research efforts sponsored by NASA's Office of Safety and Mission Assurance defined terminology, categorized data fields, and designed a baseline repository that centralizes and compiles a comprehensive listing of ACs and correlated data relevant across many NASA missions. This prototype tool helps projects improve analysis by tracking ACs and allowing queries based on project, mission type, domaincomponent, causal fault, and other key characteristics. Vulnerability in off-nominal situations, architectural design weaknesses, and unexpected or undesirable system behaviors in reaction to faults are curtailed with the awareness of ACs and risk-significant scenarios modeled for analysts through this database. Integration within the Enterprise Architecture at NASA IVV enables interfacing with other tools and datasets, technical support, and accessibility across the Agency. This paper discusses the development of an improved workflow process utilizing this database for adaptive, risk-informed FM assurance that critical software systems will safely and securely protect against faults and respond to ACs in order to achieve successful missions.

Jim Starnes' Contributions to Residual Strength Analysis Methods for Metallic Structures

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Harris, Charles E.

2005-01-01

A summary of advances in residual strength analyses methods for metallic structures that were realized under the leadership of Dr. James H. Starnes, Jr., is presented. The majority of research led by Dr. Starnes in this area was conducted in the 1990's under the NASA Airframe Structural Integrity Program (NASIP). Dr. Starnes, respectfully referred to herein as Jim, had a passion for studying complex response phenomena and dedicated a significant amount of research effort toward advancing damage tolerance and residual strength analysis methods for metallic structures. Jim's efforts were focused on understanding damage propagation in built-up fuselage structure with widespread fatigue damage, with the goal of ensuring safety in the aging international commercial transport fleet. Jim's major contributions in this research area were in identifying the effects of combined internal pressure and mechanical loads, and geometric nonlinearity, on the response of built-up structures with damage. Analytical and experimental technical results are presented to demonstrate the breadth and rigor of the research conducted in this technical area. Technical results presented herein are drawn exclusively from papers where Jim was a co-author.

The Airline Lifesaver: a 17-year analysis of a technique to prompt the delivery of a safety message.

PubMed

Geller, E Scott; Hickman, Jeffrey S; Pettinger, Charles B

2004-01-01

The Airline Lifesaver (AL) is a 13.3 cm x 9.8 cm card any passenger can deliver to the attendant of a commercial airline in order to prompt the delivery of an important safety message. In particular, the AL requests the following safety--belt reminder be added to the regular announcements given at the end of the flight-"Now that you have worn a seat belt for the safest part of your trip, the flight crew would like to remind you to buckle-up during your ground transportation." The AL card was handed to 1,258 flight attendants over a 17-year period and compliance with the request for the safety message was systematically tracked. Slightly more than one-third of the AL cards (n=460) included an incentive for making the announcement. Without the incentive, compliance to give the buckle-up reminder was 35.5% of 798 flights. With the incentive, compliance was significantly higher (i.e., 53.3%). The validity of the AL intervention is discussed with regard to its: (a) relevance to cognitive dissonance and consistency theory, and (b) broad-based applicability as a component of community-wide efforts to facilitate a safety-focused culture. The 17-year study also demonstrated a practical and cost-effective application of a behavior-based incentive program.

IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strydom, Gerhard; Bostelmann, F.

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained).more » SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) be implemented. This CRP is a continuation of the previous IAEA and Organization for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) international activities on Verification and Validation (V&V) of available analytical capabilities for HTGR simulation for design and safety evaluations. Within the framework of these activities different numerical and experimental benchmark problems were performed and insight was gained about specific physics phenomena and the adequacy of analysis methods.« less

Improving the Well-Being of Abused and Neglected Children. Hearing on Exploring How the Well-Being of Abused and Neglected Children Can Be Improved through Clarifying the Reasonable Efforts Requirement of the Adoption Assistance and Child Welfare Act To Make the Child's Health and Safety the Primary Concern, before the Committee on Labor and Human Resources. United States Senate, One Hundred Fourth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

This hearing transcript presents testimony exploring how the well-being of abused and neglected children can be improved through an amendment clarifying the "reasonable efforts" requirement of the Adoption Assistance and Child Welfare Act (1980) to allow the child's health and safety to take precedence over parents' rights. Testimony…

Health information technology: transforming chronic disease management and care transitions.

PubMed

Rao, Shaline; Brammer, Craig; McKethan, Aaron; Buntin, Melinda B

2012-06-01

Adoption of health information technology (HIT) is a key effort in improving care delivery, reducing costs of health care, and improving the quality of health care. Evidence from electronic health record (EHR) use suggests that HIT will play a significant role in transforming primary care practices and chronic disease management. This article shows that EHRs and HIT can be used effectively to manage chronic diseases, that HIT can facilitate communication and reduce efforts related to transitions in care, and that HIT can improve patient safety by increasing the information available to providers and patients, improving disease management and safety. Copyright © 2012 Elsevier Inc. All rights reserved.

Risk management in international manned space program operations.

PubMed

Seastrom, J W; Peercy, R L; Johnson, G W; Sotnikov, B J; Brukhanov, N

2004-02-01

New, innovative joint safety policies and requirements were developed in support of the Shuttle/Mir program, which is the first phase of the International Space Station program. This work has resulted in a joint multinational analysis culminating in joint certification for mission readiness. For these planning and development efforts, each nation's risk programs and individual safety practices had to be integrated into a comprehensive and compatible system that reflects the joint nature of the endeavor. This paper highlights the major incremental steps involved in planning and program integration during development of the Shuttle/Mir program. It traces the transition from early development to operational status and highlights the valuable lessons learned that apply to the International Space Station program (Phase 2). Also examined are external and extraneous factors that affected mission operations and the corresponding solutions to ensure safe and effective Shuttle/Mir missions. c2003 Published by Elsevier Ltd.

Extravehicular activity welding experiment

NASA Technical Reports Server (NTRS)

Watson, J. Kevin

1989-01-01

The In-Space Technology Experiments Program (INSTEP) provides an opportunity to explore the many critical questions which can only be answered by experimentation in space. The objective of the Extravehicular Activity Welding Experiment definition project was to define the requirements for a spaceflight experiment to evaluate the feasibility of performing manual welding tasks during EVA. Consideration was given to experiment design, work station design, welding hardware design, payload integration requirements, and human factors (including safety). The results of this effort are presented. Included are the specific objectives of the flight test, details of the tasks which will generate the required data, and a description of the equipment which will be needed to support the tasks. Work station requirements are addressed as are human factors, STS integration procedures and, most importantly, safety considerations. A preliminary estimate of the cost and the schedule for completion of the experiment through flight and postflight analysis are given.

Did you have an impact? A theory-based method for planning and evaluating knowledge-transfer and exchange activities in occupational health and safety.

PubMed

Kramer, Desré M; Wells, Richard P; Carlan, Nicolette; Aversa, Theresa; Bigelow, Philip P; Dixon, Shane M; McMillan, Keith

2013-01-01

Few evaluation tools are available to assess knowledge-transfer and exchange interventions. The objective of this paper is to develop and demonstrate a theory-based knowledge-transfer and exchange method of evaluation (KEME) that synthesizes 3 theoretical frameworks: the promoting action on research implementation of health services (PARiHS) model, the transtheoretical model of change, and a model of knowledge use. It proposes a new term, keme, to mean a unit of evidence-based transferable knowledge. The usefulness of the evaluation method is demonstrated with 4 occupational health and safety knowledge transfer and exchange (KTE) implementation case studies that are based upon the analysis of over 50 pre-existing interviews. The usefulness of the evaluation model has enabled us to better understand stakeholder feedback, frame our interpretation, and perform a more comprehensive evaluation of the knowledge use outcomes of our KTE efforts.

Cascade Distillation System Design for Safety and Mission Assurance

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.; Callahan, Michael R.

2015-01-01

Per the NASA Human Health, Life Support and Habitation System Technology Area 06 report "crewed missions venturing beyond Low-Earth Orbit (LEO) will require technologies with improved reliability, reduced mass, self-sufficiency, and minimal logistical needs as an emergency or quick-return option will not be feasible." To meet this need, the development team of the second generation Cascade Distillation System (CDS 2.0) opted a development approach that explicitely incorporate consideration of safety, mission assurance, and autonomy. The CDS 2.0 prelimnary design focused on establishing a functional baseline that meets the CDS core capabilities and performance. The critical design phase is now focused on incorporating features through a deliberative process of establishing the systems failure modes and effects, identifying mitigative strategies, and evaluating the merit of the proposed actions through analysis and test. This paper details results of this effort on the CDS 2.0 design.

Text messaging for sexual communication and safety among African American young adults.

PubMed

Broaddus, Michelle R; Dickson-Gomez, Julia

2013-10-01

African American young adults are at high risk of HIV infection during their lifetimes, and the male condom remains the best method of prevention. Efforts to increase condom use should address the barrier of condom negotiation. We conducted a thematic analysis of qualitative, semistructured interviews with African American young adults to examine their use of text messaging for requesting human immunodeficiency virus (HIV) or sexually transmitted infection (STI) testing and condom use within the larger context of general sexual communication using text messages. Text messaging gave participants a level of comfort and disinhibition to discuss sexual topics and negotiate sexual safety. Benefits of text messages included ease of communication, privacy, and increased ability to express condom desires. Difficulties reflected the potential relationship implications of suggesting HIV/STI testing and condom use. Condom negotiation strategies using text messages also mirrored those found to be used in face-to-face communication.

Text Messaging for Sexual Communication and Safety Among African American Young Adults

PubMed Central

Broaddus, Michelle R.; Dickson-Gomez, Julia

2014-01-01

African American young adults are at high risk of HIV infection during their lifetimes, and the male condom remains the best method of prevention. Efforts to increase condom use should address the barrier of condom negotiation. We conducted a thematic analysis of qualitative, semi-structured interviews with African American young adults to examine their use of text messaging for requesting Human Immunodeficiency Virus (HIV) or sexually transmitted infection (STI) testing and condom use within the larger context of general sexual communication using text messages. Text messaging gave participants a level of comfort and disinhibition to discuss sexual topics and negotiate sexual safety. Benefits of text messages included ease of communication, privacy, and increased ability to express condom desires. Difficulties reflected the potential relationship implications of suggesting HIV/STI testing and condom use. Condom negotiation strategies using text messages also mirrored those used found to be used in face-to-face communication. PMID:24045286

Cascade Distillation System Design for Safety and Mission Assurance

NASA Technical Reports Server (NTRS)

Sarguisingh, Miriam; Callahan, Michael R.; Okon, Shira

2015-01-01

Per the NASA Human Health, Life Support and Habitation System Technology Area 06 report "crewed missions venturing beyond Low-Earth Orbit (LEO) will require technologies with improved reliability, reduced mass, self-sufficiency, and minimal logistical needs as an emergency or quick-return option will not be feasible".1 To meet this need, the development team of the second generation Cascade Distillation System (CDS 2.0) chose a development approach that explicitly incorporate consideration of safety, mission assurance, and autonomy. The CDS 2.0 preliminary design focused on establishing a functional baseline that meets the CDS core capabilities and performance. The critical design phase is now focused on incorporating features through a deliberative process of establishing the systems failure modes and effects, identifying mitigation strategies, and evaluating the merit of the proposed actions through analysis and test. This paper details results of this effort on the CDS 2.0 design.

The Uses of Text Messaging in Sexual Relationships Scale: Associations with risky sexual behavior among at-risk African American emerging adults

PubMed Central

Broaddus, Michelle; Dickson-Gomez, Julia

2017-01-01

Qualitative and quantitative research was used to create the Uses of Texting in Sexual Relationships scale. At-risk, predominantly African American emerging adults participated in qualitative interviews (N = 20) and quantitative surveys (N = 110) about their uses of text messaging within romantic and sexual relationships. Exploratory factor analysis of items generated from interviews resulted in four subscales: Sexting, Relationship Maintenance, Relationship Development, and Texting for Sexual Safety. Exploratory analyses indicated associations of Sexting with more instances of condomless sex, and Texting for Sexual Safety with fewer instances of condomless sex, which was moderated by relationship power. Further research on the connections between text messaging in relationships and sexual behavior among high-risk and minority young adults is warranted, and intervention efforts to decrease sexual risks need to incorporate these avenues of sexual communication. PMID:27710089

The Uses of Texting in Sexual Relationships Scale: Associations With Risky Sexual Behavior Among At-Risk African American Emerging Adults.

PubMed

Broaddus, Michelle; Dickson-Gomez, Julia

2016-10-01

Qualitative and quantitative research was used to create the Uses of Texting in Sexual Relationships scale. At-risk, predominantly African American emerging adults participated in qualitative interviews (N = 20) and quantitative surveys (N = 110) about their uses of text messaging within romantic and sexual relationships. Exploratory factor analysis of items generated from interviews resulted in four subscales: Sexting, Relationship Maintenance, Relationship Development, and Texting for Sexual Safety. Exploratory analyses indicated associations of Sexting with more instances of condomless sex, and Texting for Sexual Safety with fewer instances of condomless sex, which was moderated by relationship power. Further research on the connections between text messaging in relationships and sexual behavior among high-risk and minority young adults is warranted, and intervention efforts to decrease sexual risks need to incorporate these avenues of sexual communication.

A mixed-methods analysis of logging injuries in Montana and Idaho.

PubMed

Lagerstrom, Elise; Magzamen, Sheryl; Rosecrance, John

2017-12-01

Despite advances in mechanization, logging continues to be one of the most dangerous occupations in the United States. Logging in the Intermountain West region (Montana and Idaho) is especially hazardous due to steep terrain, extreme weather, and remote work locations. We implemented a mixed-methods approach combining analyses of workers' compensation claims and focus groups to identify factors associated with injuries and fatalities in the logging industry. Inexperienced workers (>6 months experience) accounted for over 25% of claims. Sprain/strain injuries were the most common, accounting for 36% of claims, while fatalities had the highest median claim cost ($274 411). Focus groups identified job tasks involving felling trees, skidding, and truck driving as having highest risk. Injury prevention efforts should focus on training related to safe work methods (especially for inexperienced workers), the development of a safety culture and safety leadership, as well as implementation of engineering controls. © 2017 Wiley Periodicals, Inc.

Career Profile: Flight Operations Engineer (Airborne Science) Robert Rivera

NASA Image and Video Library

2015-05-14

Operations engineers at NASA's Armstrong Flight Research Center help to advance science, technology, aeronautics, and space exploration by managing operational aspects of a flight research project. They serve as the governing authority on airworthiness related to the modification, operation, or maintenance of specialized research or support aircraft so those aircraft can be flown safely without jeopardizing the pilots, persons on the ground or the flight test project. With extensive aircraft modifications often required to support new research and technology development efforts, operations engineers are key leaders from technical concept to flight to ensure flight safety and mission success. Other responsibilities of an operations engineer include configuration management, performing systems design and integration, system safety analysis, coordinating flight readiness activities, and providing real-time flight support. This video highlights the responsibilities and daily activities of NASA Armstrong operations engineer Robert Rivera during the preparation and execution of the Global Hawk airborne missions under NASA's Science Mission Directorate.

Mining injuries in Serbian underground coal mines -- a 10-year study.

PubMed

Stojadinović, Saša; Svrkota, Igor; Petrović, Dejan; Denić, Miodrag; Pantović, Radoje; Milić, Vitomir

2012-12-01

Mining, especially underground coal mining, has always been a dangerous occupation. Injuries, unfortunately, even those resulting in death, are one of the major occupational risks that all miners live with. Despite the fact that all workers are aware of the risk, efforts must be and are being made to increase the safety of mines. Injury monitoring and data analysis can provide us with valuable data on the causes of accidents and enable us to establish a correlation between the conditions in the work environment and the number of injuries, which can further lead to proper preventive measures. This article presents the data on the injuries in Serbian coal mines during a 10-year period (2000-2009). The presented results are only part of an ongoing study whose aim is to assess the safety conditions in Serbian coal mines and classify them according to that assessment. Copyright © 2011 Elsevier Ltd. All rights reserved.

Developing a Framework for Evaluating the Patient Engagement, Quality, and Safety of Mobile Health Applications.

PubMed

Singh, Karandeep; Drouin, Kaitlin; Newmark, Lisa P; Rozenblum, Ronen; Lee, Jaeho; Landman, Adam; Pabo, Erika; Klinger, Elissa V; Bates, David W

2016-02-01

Rising ownership of smartphones and tablets across social and demographic groups has made mobile applications, or apps, a potentially promising tool for engaging patients in their health care, particularly those with high health care needs. Through a systematic search of iOS (Apple) and Android app stores and an analysis of apps targeting individuals with chronic illnesses, we assessed the degree to which apps are likely to be useful in patient engagement efforts. Usefulness was determined based on the following criteria: description of engagement, relevance to the targeted patient population, consumer ratings and reviews, and most recent app update. Among the 1,046 health care-related, patient-facing applications identified by our search, 43 percent of iOS apps and 27 percent of Android apps appeared likely to be useful. We also developed criteria for evaluating the patient engagement, quality, and safety of mobile apps.

Evaluating the Effectiveness of Traditional Training Methods in Non-Traditional Training Programs for Adult Learners through a Pre-Test/Post-Test Comparison of Food Safety Knowledge

ERIC Educational Resources Information Center

Dodd, Caleb D.; Burris, Scott; Fraze, Steve; Doerfert, David; McCulloch, Abigail

2013-01-01

The incorporation of hot and cold food bars into grocery stores in an effort to capture a portion of the home meal replacement industry is presenting new challenges for retail food establishments. To ensure retail success and customer safety, employees need to be educated in food safety practices. Traditional methods of training are not meeting…

THE ROLE OF THE CONSEQUENCE MANAGEMENT HOME TEAM IN THE FUKUSHIMA DAIICHI RESPONSE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pemberton, Wendy; Mena, RaJah; Beal, William

The Consequence Management Home Team is a U.S. Department of Energy/National Nuclear Security Administration asset. It assists a variety of response organizations with modeling; radiological operations planning; field monitoring techniques; and the analysis, interpretation, and distribution of radiological data. These reach-back capabilities are activated quickly to support public safety and minimize the social and economic impact of a nuclear or radiological incident. In the Fukushima Daiichi response, the Consequence Management Home Team grew to include a more broad range of support than was historically planned. From the early days of the response to the continuing involvement in supporting late phasemore » efforts, each stage of the Consequence Management Home Team support had distinct characteristics in terms of management of incoming data streams as well as creation of products. Regardless of stage, the Consequence Management Home Team played a critical role in the Fukushima Daiichi response effort.« less

Developing U.S. oversight strategies for nanobiotechnology: learning from past oversight experiences.

PubMed

Paradise, Jordan; Wolf, Susan M; Kuzma, Jennifer; Kuzhabekova, Aliya; Tisdale, Alison W; Kokkoli, Efrosini; Ramachandran, Gurumurthy

2009-01-01

The emergence of nanotechnology, and specifically nanobiotechnology, raises major oversight challenges. In the United States, government, industry, and researchers are debating what oversight approaches are most appropriate. Among the federal agencies already embroiled in discussion of oversight approaches are the Food and Drug Administration (FDA), Environmental Protection Agency (EPA), Department of Agriculture (USDA), Occupational Safety and Health Administration (OSHA), and National Institutes of Health (NIH). All can learn from assessment of the successes and failures of past oversight efforts aimed at emerging technologies. This article reports on work funded by the National Science Foundation (NSF) aimed at learning the lessons of past oversight efforts. The article offers insights that emerge from comparing five oversight case studies that examine oversight of genetically engineered organisms (GEOs) in the food supply, pharmaceuticals, medical devices, chemicals in the workplace, and gene therapy. Using quantitative and qualitative analysis, the authors present a new way of evaluating oversight.

An assessment of food safety information provision for UK chemotherapy patients to reduce the risk of foodborne infection.

PubMed

Evans, E W; Redmond, E C

2017-12-01

Given the increased risk of foodborne infection to cancer patients receiving chemotherapy treatment, and the risk of listeriosis reportedly five-times greater to this immunocompromised patient group, there is a need to ensure the implementation of domestic food safety practices among chemotherapy patients and their family caregivers. However, information regarding the adequacy of resources to inform and enable patients to implement domestic food safety practices to reduce the risk of foodborne infection is limited. Consequently, this study aimed to evaluate the provision of food safety information available to UK chemotherapy patients. In-depth semi-structured interviews and content analysis of online patient information resources. Interviews with patients and family caregivers (n = 15) were conducted to explore food-related experiences during chemotherapy treatment. Online food-related information resources for chemotherapy patients (n = 45) were obtained from 35 of 154 National Health Service chemotherapy providers in England, Scotland, and Wales, the Department of Health (DoH) and three of 184 identified UK cancer charities. Identified food-related information resources were reviewed using a content-analysis approach to assess the inclusion of food safety information for chemotherapy patients. In-depth interviews established that many patients indicated awareness of immunosuppression during treatment. Although patients reported practicing caution to reduce the risk of communicable diseases by avoiding crowded spaces/public transport, food safety was reported to be of minimal concern during treatment and the risk of foodborne infection was often underestimated. The review of online food-related patient information resources established that many resources failed to highlight the increased risk of foodborne infection and emphasize the importance of food safety for patients during chemotherapy treatment. Considerable information gaps exist, particularly in relation to listeriosis prevention practices. Cumulatively, information was inconsistent, insufficient, and varied between resources. The study has identified the need for an effective, standardized food safety resource specifically targeting chemotherapy patients and family caregivers. Such intervention is essential to assist efforts in reducing the risks associated with foodborne infection among chemotherapy patients. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

Safety interventions on the labor and delivery unit.

PubMed

Kacmar, Rachel M

2017-06-01

The present review highlights recent advances in efforts to improve patient safety on labor and delivery units and well tolerated care for pregnant patients in general. Recent studies in obstetric patient safety have a broad focus but repetitive themes for interdisciplinary training include: simulating critical events, having open multidisciplinary communication, frequent reviews of cases of maternal morbidity, and implementing maternal early warning systems. The National Partnership for Maternal Safety is also active in promoting care bundles across many topics on maternal safety. A culture of safety is the goal for all obstetric units. Achieving that ideal requires multidisciplinary collaboration, frequent reassessment for areas of improvement, and a culture of openness to change when improvement opportunities arise.

Applying the WHO conceptual framework for the International Classification for Patient Safety to a surgical population

PubMed Central

McElroy, L. M.; Woods, D. M.; Yanes, A. F.; Skaro, A. I.; Daud, A.; Curtis, T.; Wymore, E.; Holl, J. L.; Abecassis, M. M.; Ladner, D. P.

2016-01-01

Objective Efforts to improve patient safety are challenged by the lack of universally agreed upon terms. The International Classification for Patient Safety (ICPS) was developed by the World Health Organization for this purpose. This study aimed to test the applicability of the ICPS to a surgical population. Design A web-based safety debriefing was sent to clinicians involved in surgical care of abdominal organ transplant patients. A multidisciplinary team of patient safety experts, surgeons and researchers used the data to develop a system of classification based on the ICPS. Disagreements were reconciled via consensus, and a codebook was developed for future use by researchers. Results A total of 320 debriefing responses were used for the initial review and codebook development. In total, the 320 debriefing responses contained 227 patient safety incidents (range: 0–7 per debriefing) and 156 contributing factors/hazards (0–5 per response). The most common severity classification was ‘reportable circumstance,’ followed by ‘near miss.’ The most common incident types were ‘resources/organizational management,’ followed by ‘medical device/equipment.’ Several aspects of surgical care were encompassed by more than one classification, including operating room scheduling, delays in care, trainee-related incidents, interruptions and handoffs. Conclusions This study demonstrates that a framework for patient safety can be applied to facilitate the organization and analysis of surgical safety data. Several unique aspects of surgical care require consideration, and by using a standardized framework for describing concepts, research findings can be compared and disseminated across surgical specialties. The codebook is intended for use as a framework for other specialties and institutions. PMID:26803539

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graslund, C.; Hellstrand, E.

Sweden benefits in many ways from the reactor safety research performed in other countries. Its own activity complements this effort, but a certain fraction is oriented toward safety issues that are intimately related to the special design of the ASEA-ATOM boiling-water reactor. Through the availability of the decommissioned Marviken reactor plant, Sweden has been able to play a leading role in integral containment experiments with international participation. Joint efforts with other countries are now devoted to defining new large-scale experiments to be performed in the unique Marviken facility. The largest portion of the safety research program in Sweden is performedmore » by Studsvik Energiteknik AB, but various universities, consultant firms, and research institutes are also involved. In addition, a substantial amount of work is done by the reactor vendor ASEA-ATOM. The overall annual budget is at present between $7 and $8 million, with three governmental authorities as the main financing bodies.« less

A formative evaluation of the implementation of a medication safety data collection tool in English healthcare settings: A qualitative interview study using normalisation process theory.

PubMed

Rostami, Paryaneh; Ashcroft, Darren M; Tully, Mary P

2018-01-01

Reducing medication-related harm is a global priority; however, impetus for improvement is impeded as routine medication safety data are seldom available. Therefore, the Medication Safety Thermometer was developed within England's National Health Service. This study aimed to explore the implementation of the tool into routine practice from users' perspectives. Fifteen semi-structured interviews were conducted with purposely sampled National Health Service staff from primary and secondary care settings. Interview data were analysed using an initial thematic analysis, and subsequent analysis using Normalisation Process Theory. Secondary care staff understood that the Medication Safety Thermometer's purpose was to measure medication safety and improvement. However, other uses were reported, such as pinpointing poor practice. Confusion about its purpose existed in primary care, despite further training, suggesting unsuitability of the tool. Decreased engagement was displayed by staff less involved with medication use, who displayed less ownership. Nonetheless, these advocates often lacked support from management and frontline levels, leading to an overall lack of engagement. Many participants reported efforts to drive scale-up of the use of the tool, for example, by securing funding, despite uncertainty around how to use data. Successful improvement was often at ward-level and went unrecognised within the wider organisation. There was mixed feedback regarding the value of the tool, often due to a perceived lack of "capacity". However, participants demonstrated interest in learning how to use their data and unexpected applications of data were reported. Routine medication safety data collection is complex, but achievable and facilitates improvements. However, collected data must be analysed, understood and used for further work to achieve improvement, which often does not happen. The national roll-out of the tool has accelerated shared learning; however, a number of difficulties still exist, particularly in primary care settings, where a different approach is likely to be required.

A formative evaluation of the implementation of a medication safety data collection tool in English healthcare settings: A qualitative interview study using normalisation process theory

PubMed Central

Ashcroft, Darren M.; Tully, Mary P.

2018-01-01

Background Reducing medication-related harm is a global priority; however, impetus for improvement is impeded as routine medication safety data are seldom available. Therefore, the Medication Safety Thermometer was developed within England’s National Health Service. This study aimed to explore the implementation of the tool into routine practice from users’ perspectives. Method Fifteen semi-structured interviews were conducted with purposely sampled National Health Service staff from primary and secondary care settings. Interview data were analysed using an initial thematic analysis, and subsequent analysis using Normalisation Process Theory. Results Secondary care staff understood that the Medication Safety Thermometer’s purpose was to measure medication safety and improvement. However, other uses were reported, such as pinpointing poor practice. Confusion about its purpose existed in primary care, despite further training, suggesting unsuitability of the tool. Decreased engagement was displayed by staff less involved with medication use, who displayed less ownership. Nonetheless, these advocates often lacked support from management and frontline levels, leading to an overall lack of engagement. Many participants reported efforts to drive scale-up of the use of the tool, for example, by securing funding, despite uncertainty around how to use data. Successful improvement was often at ward-level and went unrecognised within the wider organisation. There was mixed feedback regarding the value of the tool, often due to a perceived lack of “capacity”. However, participants demonstrated interest in learning how to use their data and unexpected applications of data were reported. Conclusion Routine medication safety data collection is complex, but achievable and facilitates improvements. However, collected data must be analysed, understood and used for further work to achieve improvement, which often does not happen. The national roll-out of the tool has accelerated shared learning; however, a number of difficulties still exist, particularly in primary care settings, where a different approach is likely to be required. PMID:29489842

17a-Methyltestosterone - Medicated feed administered to Tilapia: Survival and pathologies.

USDA-ARS?s Scientific Manuscript database

17a-Methyltestosterone (17MT) is used in U.S. aquaculture under an Investigational New Animal Drug exemption to produce male populations of tilapia. Efforts to gain FDA-approval include this Target Animal Safety study. A study was designed to determine its histological safety to tilapia when fed a...

American Association of Poison Control Centers

Science.gov Websites

centers in their efforts to prevent and treat poison exposures. Poison centers offer free, confidential ۼ Over-the-Counter Medicine Safety Over-the-Counter Medicine Safety is a 100% free, evidence-based after the close of the data year in the journal Clinical Toxicology and is available for download free

A Real-time Evaluation of Human-based Approaches to Safety Testing: What We Can Do Now (TDS)

EPA Science Inventory

Despite ever-increasing efforts in early safety assessment in all industries, there are still many chemicals that prove toxic in humans. While greater use of human in vitro test methods may serve to reduce this problem, the formal validation process applied to such tests represen...

Effectiveness of Flashing Lights and Flashing Lights with Gates in Reducing Accident Frequency at Public Rail-Highway Crossings, 1975-1978

DOT National Transportation Integrated Search

1980-04-01

The Highway Safety Acts of 1973 and 1976, and the Surface Transportation Assistance Act of 1978, provide funds to individual states to improve safety at public rail-highway crossings. The report was undertaken in support of a U.S. DOT effort to devel...

Application and Testing of Transparent Plastics Used in Airplane Construction

NASA Technical Reports Server (NTRS)

Riechers, K; Olms, J

1938-01-01

This report concerns the efforts being made to remove the source of danger to passengers arising from the fracturing of silicate glass. Some of the alternatives presented include: single-layer safety glass, multi-layer safety glass, transparent plastic resins. Some of the resins considered are celluloid, cellulose acetates, and mixtures of polymers.

Development and Evaluation of Food Safety Modules for K-12 Science Education

ERIC Educational Resources Information Center

Chapin, Travis K.; Pfuntner, Rachel C.; Stasiewicz, Matthew J.; Wiedmann, Martin; Orta-Ramirez, Alicia

2015-01-01

Career and educational opportunities in food science and food safety are underrecognized by K-12 students and educators. Additionally, misperceptions regarding nature of science understanding persist in K-12 students despite being emphasized as an important component of science education for over 100 y. In an effort to increase awareness…

Predicting In Vivo Effect Levels for Repeat Dose Systemic Toxicity using Chemical, Biological, Kinetic and Study Covariates

EPA Science Inventory

In an effort to ensure chemical safety while reducing reliance on animal testing, USEPA and L’Oréal have collaborated to address a major challenge in chemical safety assessment using alternative approaches: the prediction of points-of-departure (POD) of systemic effects. Systemic...

Women's Role in Creating the Field of Health and Safety Communication.

ERIC Educational Resources Information Center

Madaus, Monica

1997-01-01

States that Crystal Eastman and Alice Hamilton, organizers of the Workers' Health Bureau, helped shape the early 20th-century health and safety communication field by targeting texts to professional and popular audiences which sought to prevent occupational accidents and disease by promoting voluntary efforts by employers, government regulation,…

The 2007 Projected Impacts to Clark County and Local Government Public Safety Agencies Resulting from the Transportation of High- Level Nuclear Waste to Yucca Mountain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mushkatel, A.H.; Conway, P.H.D.S.; Navis, I.

2008-07-01

This paper focuses on projecting fiscal impacts to public safety agencies from the proposed high-level nuclear waste repository at Yucca Mountain, Nevada. The efforts made by Clark County Nevada, to develop a fiscal model of impacts for public safety agencies are described in this paper. In addition, the scenarios used in the study are discussed, as well as a discussion of the plume models provided for each community's scenario that result from the efforts of the National Atmospheric Release Advisory Center (NARAC). Some of the difficulties in constructing a fiscal model of impacts for the entire 24 year high-level nuclearmore » waste transportation shipping campaign are identified, and a refined methodology is provided to accomplish this task. Finally, a comparison of the fiscal impact projections for public safety agencies that Clark County developed in 2001, 2005 are discussed, and the fiscal impact cost projections for the entire 24 year transportation campaign are provided. (authors)« less

Safety management of complex research operations

NASA Technical Reports Server (NTRS)

Brown, W. J.

1981-01-01

Complex research and technology operations present many varied potential hazards which must be addressed in a disciplined independent safety review and approval process. The research and technology effort at the Lewis Research Center is divided into programmatic areas of aeronautics, space and energy. Potential hazards vary from high energy fuels to hydrocarbon fuels, high pressure systems to high voltage systems, toxic chemicals to radioactive materials and high speed rotating machinery to high powered lasers. A Safety Permit System presently covers about 600 potentially hazardous operations. The Safety Management Program described in this paper is believed to be a major factor in maintaining an excellent safety record at the Lewis Research Center.