Review and analysis of community traffic safety programs. Volume 2, Appendices

DOT National Transportation Integrated Search

1994-01-01

A Community Traffic Safety Program (CTSP) is an established unit in the community, sustained over time, that has public and private input and participation to an action plan to solve one or more of the community's traffic safety problems. Currently, ...

Introduction to HACCP.

USDA-ARS?s Scientific Manuscript database

The Hazard Analysis and Critical Control Point (HACCP) food safety inspection program is utilized by both USDA Food Safety Inspection Service (FSIS) and FDA for many of the products they regulate. This science-based program was implemented by the USDA FSIS to enhance the food safety of meat and pou...

Improving Safety Data Collection, Access, and Analysis for California's Strategic Highway Safety Plan (SHSP): Proceedings from the Federal Highway Administration's Highway Safety Improvement Program (HSIP) Peer-to-Peer Exchange Program

DOT National Transportation Integrated Search

2010-09-28

This report provides a summary of a peer exchange sponsored by the California Office of Traffic Safety (OTS), California Department of Transportation (Caltrans), the California Highway Patrol (CHP), and the Federal Highway Administration (FHWA). The ...

The principles of HACCP.

USDA-ARS?s Scientific Manuscript database

The Hazard Analysis and Critical Control Point (HACCP) food safety inspection program is utilized by both USDA Food Safety Inspection Service (FSIS) and FDA for many of the products they regulate. This science-based program was implemented by the USDA FSIS to enhance the food safety of meat and pou...

Safety analysis report: A comparison of incidents from Safety Years 2006 through 2010, USDA Forest Service, Rocky Mountain Research Station Inventory and Monitoring Program

Treesearch

Devon Donahue

2012-01-01

This paper is an analysis of 5 years of accident data for the USDA Forest Service, Rocky Mountain Research Station (RMRS) Inventory and Monitoring (IM) Program that identifies past trends, allows for standardized self-comparison, and increases our understanding of the true costs of injuries and accidents. Measuring safety is a difficult task. While most agree that...

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2013 : analysis brief.

DOT National Transportation Integrated Search

2017-08-01

The Roadside Inspection and Traffic Enforcement programs are two of FMCSAs most powerful safety tools. By continually examining the results of these programs, FMCSA can ensure that they are being executed effectively and are producing the desired ...

A Discussion of Patient Safety Programs in the United States Air Force Ground Medical Expeditionary Environment and an Analysis of Potential Solutions for Increasing Their Effectiveness

DTIC Science & Technology

2017-05-01

and 4N to work Patient Safety together, and it has worked out fine in our environment .” • “It is my opinion that there needs to be a permanent full...GROUND MEDICAL EXPEDITIONARY ENVIRONMENT AND AN ANALYSIS OF POTENTIAL SOLUTIONS FOR INCREASING THEIR EFFECTIVENESS By: James Lee...DISCUSSION OF PATIENT SAFETY PROGRAMS IN THE UNITED STATES AIR FORCE GROUND MEDICAL EXPEDITIONARY ENVIRONMENT AND AN ANALYSIS OF POTENTIAL SOLUTIONS FOR

Food-safety educational goals for dietetics and hospitality students.

PubMed

Scheule, B

2000-08-01

To identify food-safety educational goals for dietetics and hospitality management students. Written questionnaires were used to identify educational goals and the most important food safety competencies for entry-level dietitians and foodservice managers. The sample included all directors of didactic programs in dietetics approved by the American Dietetic Association and baccalaureate-degree hospitality programs with membership in the Council on Hotel, Restaurant, and Institutional Education. Fifty-one percent of the directors responded. Descriptive statistics were calculated. chi 2 analysis and independent t tests were used to compare educators' responses for discrete and continuous variables, respectively. Exploratory factor analysis grouped statements about food safety competence. Internal consistency of factors was measured using Cronbach alpha. Thirty-four percent of dietetics programs and 70% of hospitality programs required or offered food safety certification. Dietetics educators reported multiple courses with food safety information, whereas hospitality educators identified 1 or 2 courses. In general, the educators rated food-safety competencies as very important or essential. Concepts related to Hazard Analysis and Critical Control Points (HAACP), irradiation, and pasteurization were rated less highly, compared with other items. Competencies related to reasons for outbreaks of foodborne illness were rated as most important. Food safety certification of dietitians and an increased emphasis on HAACP at the undergraduate level or during the practice component are suggested. Research is recommended to assess the level of food-safety competence expected by employers of entry-level dietitians and foodservice managers.

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... or potential safety hazards over the life cycle of the equipment; (3) Identify safety issues during... issues, reducing hazards, and meeting safety requirements; (6) Develop a program of testing or analysis...

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... or potential safety hazards over the life cycle of the equipment; (3) Identify safety issues during... issues, reducing hazards, and meeting safety requirements; (6) Develop a program of testing or analysis...

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Food Safety Programs Based on HACCP Principles in School Nutrition Programs: Implementation Status and Factors Related to Implementation

ERIC Educational Resources Information Center

Stinson, Wendy Bounds; Carr, Deborah; Nettles, Mary Frances; Johnson, James T.

2011-01-01

Purpose/Objectives: The objectives of this study were to assess the extent to which school nutrition (SN) programs have implemented food safety programs based on Hazard Analysis and Critical Control Point (HACCP) principles, as well as factors, barriers, and practices related to implementation of these programs. Methods: An online survey was…

Making the Hubble Space Telescope servicing mission safe

NASA Technical Reports Server (NTRS)

Bahr, N. J.; Depalo, S. V.

1992-01-01

The implementation of the HST system safety program is detailed. Numerous safety analyses are conducted through various phases of design, test, and fabrication, and results are presented to NASA management for discussion during dedicated safety reviews. Attention is given to the system safety assessment and risk analysis methodologies used, i.e., hazard analysis, fault tree analysis, and failure modes and effects analysis, and to how they are coupled with engineering and test analysis for a 'synergistic picture' of the system. Some preliminary safety analysis results, showing the relationship between hazard identification, control or abatement, and finally control verification, are presented as examples of this safety process.

The Necessity of Functional Analysis for Space Exploration Programs

NASA Technical Reports Server (NTRS)

Morris, A. Terry; Breidenthal, Julian C.

2011-01-01

As NASA moves toward expanded commercial spaceflight within its human exploration capability, there is increased emphasis on how to allocate responsibilities between government and commercial organizations to achieve coordinated program objectives. The practice of program-level functional analysis offers an opportunity for improved understanding of collaborative functions among heterogeneous partners. Functional analysis is contrasted with the physical analysis more commonly done at the program level, and is shown to provide theoretical performance, risk, and safety advantages beneficial to a government-commercial partnership. Performance advantages include faster convergence to acceptable system solutions; discovery of superior solutions with higher commonality, greater simplicity and greater parallelism by substituting functional for physical redundancy to achieve robustness and safety goals; and greater organizational cohesion around program objectives. Risk advantages include avoidance of rework by revelation of some kinds of architectural and contractual mismatches before systems are specified, designed, constructed, or integrated; avoidance of cost and schedule growth by more complete and precise specifications of cost and schedule estimates; and higher likelihood of successful integration on the first try. Safety advantages include effective delineation of must-work and must-not-work functions for integrated hazard analysis, the ability to formally demonstrate completeness of safety analyses, and provably correct logic for certification of flight readiness. The key mechanism for realizing these benefits is the development of an inter-functional architecture at the program level, which reveals relationships between top-level system requirements that would otherwise be invisible using only a physical architecture. This paper describes the advantages and pitfalls of functional analysis as a means of coordinating the actions of large heterogeneous organizations for space exploration programs.

Integrated Safety Risk Reduction Approach to Enhancing Human-Rated Spaceflight Safety

NASA Astrophysics Data System (ADS)

Mikula, J. F. Kip

2005-12-01

This paper explores and defines the current accepted concept and philosophy of safety improvement based on a Reliability enhancement (called here Reliability Enhancement Based Safety Theory [REBST]). In this theory a Reliability calculation is used as a measure of the safety achieved on the program. This calculation may be based on a math model or a Fault Tree Analysis (FTA) of the system, or on an Event Tree Analysis (ETA) of the system's operational mission sequence. In each case, the numbers used in this calculation are hardware failure rates gleaned from past similar programs. As part of this paper, a fictional but representative case study is provided that helps to illustrate the problems and inaccuracies of this approach to safety determination. Then a safety determination and enhancement approach based on hazard, worst case analysis, and safety risk determination (called here Worst Case Based Safety Theory [WCBST]) is included. This approach is defined and detailed using the same example case study as shown in the REBST case study. In the end it is concluded that an approach combining the two theories works best to reduce Safety Risk.

An organizational analysis of road traffic crash prevention to explain the difficulties of a national program in a low income country.

PubMed

Vogel, Tania; Reinharz, Daniel; Gripenberg, Marissa; Barennes, Hubert

2015-09-28

Road traffic crashes (RTC), that daily kill 3400 people and leave 15,000 with a permanent disability could be prevented through the implementation of safety programs developed in partnership with governments and institutions. The relationship between key stakeholders can be a crucial determinant to the effectiveness of road safety programs. This issue has rarely been addressed. We conducted a detailed organizational analysis of the stakeholders involved in road safety programs in Lao People's Democratic Republic (Lao PDR). A case study was performed. The framework used was a snowball effect in which the characterization of all key stakeholders and the links between them, as well as the factors that led to these links, were determined. The effect of the relations between key stakeholders on the prevention of RTC was assessed through an analysis of the transactional, intangible and controlling factors that influence these relationships. The design and implementation of road safety programs in Lao PDR suffer from weak relationships between stakeholders and a poorly functional bicephal leadership between the Ministry of Public Works and Transport and the non-governmental organisation called Handicap International. This poor coordination between key stakeholders is evident, particularly in the area of collective action and is reinforced by a lack of interest from several different stakeholders. Most agencies do not prioritize road safety. Uneven distribution of funding is another contributing factor. Strengthening the leadership is crucial to the success of the program. Some organisations have skills, power the decision making and the allocation of resources in regards to road safety programs. Encouraging participation of these organizations through a more prominent position would thus result in a better collaboration. Non-monetary rewards would further help to strengthen collaborative work. The bicephal nature of the leadership of road safety programs proves detrimental, is associated with a weak coalition between stakeholders, and contributes to the declaimed poor effectiveness of the existing programs. The study has identified non-monetary and realistic means of strengthening the collaboration between key stakeholders. Stakeholders need to revise their interpretive schemes, in order to actively support the reinforcement of government leadership of road safety policies.

Design for Reliability and Safety Approach for the New NASA Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new launch vehicles, the ARES I and ARES V. Specifically, the paper addresses the use of an integrated probabilistic functional analysis to support the design analysis cycle and a probabilistic risk assessment (PRA) to support the preliminary design and beyond.

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

Safety assessment for EPS electron-proton spectrometer

NASA Technical Reports Server (NTRS)

Gleeson, P.

1971-01-01

A safety analysis was conducted to identify the efforts required to assure relatively hazard free operation of the EPS and to meet the safety requirements of the program. Safety engineering criteria, principles, and techniques in applicable disciplines are stressed in the performance of the system and subsystem studies; in test planning; in the design, development, test, evaluation, and checkout of the equipment; and the operating procedures for the EPS program.

Analyzing and strengthening the vaccine safety program in Manitoba.

PubMed

Montalban, J M; Ogbuneke, C; Hilderman, T

2014-12-04

The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS's) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program.

Analyzing and strengthening the vaccine safety program in Manitoba

PubMed Central

Montalban, JM; Ogbuneke, C; Hilderman, T

2014-01-01

Background: The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. Objectives To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS’s) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Method Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Results Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. Conclusion The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program. PMID:29769910

FMCSA safety program effectiveness measurement : carrier intervention effectiveness model, version 1.0 : [analysis brief].

DOT National Transportation Integrated Search

2015-01-01

The Carrier Intervention Effectiveness Model (CIEM) : provides the Federal Motor Carrier Safety : Administration (FMCSA) with a tool for measuring : the safety benefits of carrier interventions conducted : under the Compliance, Safety, Accountability...

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

Reveley, Mary S.

2003-01-01

The goal of the NASA Aviation Safety Program (AvSP) is to develop and demonstrate technologies that contribute to a reduction in the aviation fatal accident rate by a factor of 5 by the year 2007 and by a factor of 10 by the year 2022. Integrated safety analysis of day-to-day operations and risks within those operations will provide an understanding of the Aviation Safety Program portfolio. Safety benefits analyses are currently being conducted. Preliminary results for the Synthetic Vision Systems (SVS) and Weather Accident Prevention (WxAP) projects of the AvSP have been completed by the Logistics Management Institute under a contract with the NASA Glenn Research Center. These analyses include both a reliability analysis and a computer simulation model. The integrated safety analysis method comprises two principal components: a reliability model and a simulation model. In the reliability model, the results indicate how different technologies and systems will perform in normal, degraded, and failed modes of operation. In the simulation, an operational scenario is modeled. The primary purpose of the SVS project is to improve safety by providing visual-flightlike situation awareness during instrument conditions. The current analyses are an estimate of the benefits of SVS in avoiding controlled flight into terrain. The scenario modeled has an aircraft flying directly toward a terrain feature. When the flight crew determines that the aircraft is headed toward an obstruction, the aircraft executes a level turn at speed. The simulation is ended when the aircraft completes the turn.

Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to present to Secretary of Energy James Watkins the findings and recommendations of the Occupational Safety and Health Administration's (OSHA) evaluation of the Department of Energy's (DOE) programs for worker safety and health at DOE's government-owned contractor-operated (GOCO) nuclear facilities. The OSHA evaluation is based on an intensive and comprehensive review and analysis of DOE's worker safety and health programs including: written programs; safety and health inspection programs; and the adequacy of resource, training, and management controls. The evaluation began on April 10, 1990 and involved over three staff years before its conclusion. Themore » evaluation was initiated by former Secretary of Labor Elizabeth Dole in response to Secretary of Energy James Watkins' request that OSHA assist him in determining the actions needed to assure that DOE has an exemplary safety and health program in place at its GOCOs. 6 figs.« less

Cost-effectiveness analysis of genotyping for HLA-B*5801 and an enhanced safety program in gout patients starting allopurinol in Singapore.

PubMed

Dong, Di; Tan-Koi, Wei-Chuen; Teng, Gim Gee; Finkelstein, Eric; Sung, Cynthia

2015-11-01

Allopurinol is an efficacious urate-lowering therapy (ULT), but is associated with rare serious adverse drug reactions of Stevens-Johnson syndrome (SJS) and toxic epidermal necrolysis (TEN), with higher risk among HLA-B*5801 carriers. We assessed the cost-effectiveness of HLA-B*5801 testing, an enhanced safety program or strategies with both components. The analysis adopted a health systems perspective and considered Singaporean patients with chronic gout, over a lifetime horizon, using allopurinol or probenecid. The model incorporated SJS/TEN and gout treatment outcomes, allele frequencies, drug prices and other medical costs. Based on cost-effectiveness threshold of US$50,000 per quality-adjusted life year, HLA-B*5801-guided ULT selection or enhanced safety program was not cost effective. Avoidance of ULTs was the least preferred strategy as uncontrolled gout leads to lower quality-adjusted life years and higher costs. The analysis underscores the need for biomarkers with higher positive predictive value for SJS/TEN, less expensive genetic tests or safety programs, or more effective gout drugs. .

OCCUPATIONAL SAFETY AND HEALTH EDUCATION AND TRAINING FOR UNDERSERVED POPULATIONS

PubMed Central

O’CONNOR, TOM; FLYNN, MICHAEL; WEINSTOCK, DEBORAH; ZANONI, JOSEPH

2015-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting under-served communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers. PMID:25053607

Occupational safety and health education and training for underserved populations.

PubMed

O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

2014-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

The effectiveness of workshops on management evaluation of traffic safety programs.

DOT National Transportation Integrated Search

1977-01-01

Nine management evaluation workshops based on The Evaluation of Highway Traffic Safety Programs' A Manual for Managers were held in various cities throughout the United States by the Office of Manpower Development (NHTSA). The analysis reported here ...

Performance analysis of Virginia's safety service patrol programs : a case study approach.

DOT National Transportation Integrated Search

2006-01-01

Many state departments of transportation (DOTs) operate safety service patrols (SSPs) as part of their incident management programs. The primary objectives of SSPs are to minimize the duration of freeway incidents, restore full capacity of the freewa...

FMCSA safety program effectiveness measurement : carrier intervention effectiveness Model, version 1.1, analysis brief.

DOT National Transportation Integrated Search

2016-11-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conclusion of each failure investigation of an item relied on for safety or management measure. (b) Process... methodology being used. (3) Requirements for existing licensees. Individuals holding an NRC license on...

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Evaluation of the Corridor Safety Improvement Program : phase 1 final report.

DOT National Transportation Integrated Search

1997-09-01

This project is an analysis of Oregon's Corridor Safety Improvement Programs implemented on Oregon Route 22 and Oregon Route 34. Improvements were : made along each corridor in 1993. : The project used a mail-out survey to determine the level of awar...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poncio, S.; Adkison, P.

Coating costs are escalating due to increased awareness of the environment and safety and health issues. Owners can reduce the overall cost of maintenance painting projects through the implementation of a total quality program. This program should encompass project pre-planning, evaluation of safety and quality assurance programs, and analysis of employee absenteeism and turnover. The information presented is a case history of one utility's experience managing a maintenance painting program during a five-year period.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Development of Flight Safety Prediction Methodology for U. S. Naval Safety Center. Revision 1

DTIC Science & Technology

1970-02-01

Safety Center. The methodology develoned encompassed functional analysis of the F-4J aircraft, assessment of the importance of safety- sensitive ... Sensitivity ... ....... . 4-8 V 4.5 Model Implementation ........ ......... . 4-10 4.5.1 Functional Analysis ..... ........... . 4-11 4. 5. 2 Major...Function Sensitivity Assignment ........ ... 4-13 i 4.5.3 Link Dependency Assignment ... ......... . 4-14 4.5.4 Computer Program for Sensitivity

A benefit/cost analysis of the National Transportation Safety Board's safety recommendation P-01-2

DOT National Transportation Integrated Search

2003-09-01

On June 22, 2001, the National Transportation Safety Board (NTSB) issued Safety : Recommendation P-0 1-2, which recommended that the U.S. Department of Transportations : (U.S. DOTS) Research and Special Programs Administration (RSPA) require th...

FMCSA Safety Program Effectiveness Measurement: Carrier Intervention Effectiveness Model, Version 1.1-Report for FY 2014 Interventions - Analysis Brief

DOT National Transportation Integrated Search

2018-04-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...

FMCSA safety program effectiveness measurement : carrier intervention effectiveness model, version 1.1 - report for FY 2013 interventions : analysis brief

DOT National Transportation Integrated Search

2017-04-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...

CERCA LEU fuel assemblies testing in Maria Reactor - safety analysis summary and testing program scope.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pytel, K.; Mieleszczenko, W.; Lechniak, J.

2010-03-01

The presented paper contains neutronic and thermal-hydraulic (for steady and unsteady states) calculation results prepared to support annex to Safety Analysis Report for MARIA reactor in order to obtain approval for program of testing low-enriched uranium (LEU) lead test fuel assemblies (LTFA) manufactured by CERCA. This includes presentation of the limits and operational constraints to be in effect during the fuel testing investigations. Also, the scope of testing program (which began in August 2009), including additional measurements and monitoring procedures, is described.

Developing and establishing the validity and reliability of the perceptions toward Aviation Safety Action Program (ASAP) and Line Operations Safety Audit (LOSA) questionnaires

NASA Astrophysics Data System (ADS)

Steckel, Richard J.

Aviation Safety Action Program (ASAP) and Line Operations Safety Audits (LOSA) are voluntary safety reporting programs developed by the Federal Aviation Administration (FAA) to assist air carriers in discovering and fixing threats, errors and undesired aircraft states during normal flights that could result in a serious or fatal accident. These programs depend on voluntary participation of and reporting by air carrier pilots to be successful. The purpose of the study was to develop and validate a measurement scale to measure U.S. air carrier pilots' perceived benefits and/or barriers to participating in ASAP and LOSA programs. Data from these surveys could be used to make changes to or correct pilot misperceptions of these programs to improve participation and the flow of data. ASAP and LOSA a priori models were developed based on previous research in aviation and healthcare. Sixty thousand ASAP and LOSA paper surveys were sent to 60,000 current U.S. air carrier pilots selected at random from an FAA database of pilot certificates. Two thousand usable ASAP and 1,970 usable LOSA surveys were returned and analyzed using Confirmatory Factor Analysis. Analysis of the data using confirmatory actor analysis and model generation resulted in a five factor ASAP model (Ease of use, Value, Improve, Trust and Risk) and a five factor LOSA model (Value, Improve, Program Trust, Risk and Management Trust). ASAP and LOSA data were not normally distributed, so bootstrapping was used. While both final models exhibited acceptable fit with approximate fit indices, the exact fit hypothesis and the Bollen-Stine p value indicated possible model mis-specification for both ASAP and LOSA models.

Problem area descriptions : motor vehicle crashes - data analysis and IVI program analysis

DOT National Transportation Integrated Search

In general, the IVI program focuses on the more significant safety problem categories as : indicated by statistical analyses of crash data. However, other factors were considered in setting : program priorities and schedules. For some problem areas, ...

Application of Gap Analysis to Education: A Case Study of the Food Safety and Quality Assurance Program at the University of Guelph

ERIC Educational Resources Information Center

Fuchs, C.; Wilcock, A.; Aung, M.

2004-01-01

This study was designed to identify the skills and knowledge deemed important for food safety professionals and the degree to which the Food Safety and Quality Assurance (FSQA) program at the Univ. of Guelph helps students to develop these skills. The research included 2 phases: interviews were conducted to identify these skill and knowledge…

Applying Failure Modes, Effects, And Criticality Analysis And Human Reliability Analysis Techniques To Improve Safety Design Of Work Process In Singapore Armed Forces

DTIC Science & Technology

2016-09-01

an instituted safety program that utilizes a generic risk assessment method involving the 5-M (Mission, Man, Machine , Medium and Management) factor...the Safety core value is hinged upon three key principles—(1) each soldier has a crucial part to play, by adopting safety as a core value and making...it a way of life in his unit; (2) safety is an integral part of training, operations and mission success, and (3) safety is an individual, team and

Critical roles of orthopaedic surgeon leadership in healthcare systems to improve orthopaedic surgical patient safety.

PubMed

Kuo, Calvin C; Robb, William J

2013-06-01

The prevention of medical and surgical harm remains an important public health problem despite increased awareness and implementation of safety programs. Successful introduction and maintenance of surgical safety programs require both surgeon leadership and collaborative surgeon-hospital alignment. Documentation of success of such surgical safety programs in orthopaedic practice is limited. We describe the scope of orthopaedic surgical patient safety issues, define critical elements of orthopaedic surgical safety, and outline leadership roles for orthopaedic surgeons needed to establish and sustain a culture of safety in contemporary healthcare systems. We identified the most common causes of preventable surgical harm based on adverse and sentinel surgical events reported to The Joint Commission. A comprehensive literature review through a MEDLINE(®) database search (January 1982 through April 2012) to identify pertinent orthopaedic surgical safety articles found 14 articles. Where gaps in orthopaedic literature were identified, the review was supplemented by 22 nonorthopaedic surgical references. Our final review included 36 articles. Six important surgical safety program elements needed to eliminate preventable surgical harm were identified: (1) effective surgical team communication, (2) proper informed consent, (3) implementation and regular use of surgical checklists, (4) proper surgical site/procedure identification, (5) reduction of surgical team distractions, and (6) routine surgical data collection and analysis to improve the safety and quality of surgical patient care. Successful surgical safety programs require a culture of safety supported by all six key surgical safety program elements, active surgeon champions, and collaborative hospital and/or administrative support designed to enhance surgical safety and improve surgical patient outcomes. Further research measuring improvements from such surgical safety systems in orthopaedic care is needed.

An evaluation of Ontario's Group Education Session (GES) for license renewal of seniors aged 80 and above.

PubMed

Vanlaar, Ward; Hing, Marisela Mainegra; Robertson, Robyn; Mayhew, Dan; Carr, David

2016-02-01

In 1996, the Ministry of Transportation in Ontario (MTO) implemented the Group Education Session (GES), which is a mandatory license renewal program for drivers aged 80 and older. This study describes an evaluation of the GES to assess its impact on road safety in Ontario, as well as its effect on the safety of individual drivers who participated in the program. Time series analysis of senior driver records both before and after implementation of the GES, and logistic regression and survival analysis examining senior driver records prior to, and following, their participation in the GES. Using time series analysis there is some evidence to suggest that the GES had a positive impact on road safety. According to the other analyses, participation in the GES is associated with a decrease in the odds of collisions and convictions, regardless of whether drivers pass their first attempt of the knowledge test or not. In addition, failing the first road test and/or having demerit points are strong indicators of future collision and conviction involvement. Results from this evaluation suggest that the GES has had a protective effect on the safety of senior drivers. The findings and discussion will help MTO improve the GES program and provide insights to other jurisdictions that have, or are considering, introducing new senior driver programs. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Safety and economic impacts of photo radar program.

PubMed

Chen, Greg

2005-12-01

Unsafe speed is one of the major traffic safety challenges facing motorized nations. In 2003, unsafe speed contributed to 31 percent of all fatal collisions, causing a loss of 13,380 lives in the United States alone. The economic impact of speeding is tremendous. According to NHTSA, the cost of unsafe speed related collisions to the American society exceeds 40 billion US dollars per year. In response, automated photo radar speed enforcement programs have been implemented in many countries. This study assesses the economic impacts of a large-scale photo radar program in British Columbia. The knowledge generated from this study could inform policy makers and project managers in making informed decisions with regard to this highly effective and efficient, yet very controversial program. This study establishes speed and safety effects of photo radar programs by summarizing two physical impact investigations in British Columbia. It then conducts a cost-benefit analysis to assess the program's economic impacts. The cost-benefit analysis takes into account both societal and funding agency's perspectives. It includes a comprehensive account of major impacts. It uses willingness to pay principle to value human lives saved and injuries avoided. It incorporates an extended sensitivity analysis to quantify the robustness of base case conclusions. The study reveals an annual net benefit of approximately 114 million in year 2001 Canadian dollars to British Columbians. The study also finds a net annual saving of over 38 million Canadian dollars for the Insurance Corporation of British Columbia (ICBC) that funded the program. These results are robust under almost all alternative scenarios tested. The only circumstance under which the net benefit of the program turns negative is when the real safety effects were one standard deviation below the estimated values, which is possible but highly unlikely. Automated photo radar traffic safety enforcement can be an effective and efficient means to manage traffic speed, reduce collisions and injuries, and combat the huge resulting economic burden to society. The cost-effectiveness of the program takes on special meaning and urgency when considering the present and future government funding constraints. The application of the program, however, should be planned and implemented with caution. Every effort should be made to focus on and to promote the program on safety improvement grounds. The program can be easily terminated because of political considerations, if the public perceives it as a cash cow to enhance government revenue.

Engineering risk reduction in satellite programs

NASA Technical Reports Server (NTRS)

Dean, E. S., Jr.

1979-01-01

Methods developed in planning and executing system safety engineering programs for Lockheed satellite integration contracts are presented. These procedures establish the applicable safety design criteria, document design compliance and assess the residual risks where non-compliant design is proposed, and provide for hazard analysis of system level test, handling and launch preparations. Operations hazard analysis identifies product protection and product liability hazards prior to the preparation of operational procedures and provides safety requirements for inclusion in them. The method developed for documenting all residual hazards for the attention of program management assures an acceptable minimum level of risk prior to program deployment. The results are significant for persons responsible for managing or engineering the deployment and production of complex high cost equipment under current product liability law and cost/time constraints, have a responsibility to minimize the possibility of an accident, and should have documentation to provide a defense in a product liability suit.

Recommendations for safety planning, data collection, evaluation and reporting during drug, biologic and vaccine development: a report of the safety planning, evaluation, and reporting team.

PubMed

Crowe, Brenda J; Xia, H Amy; Berlin, Jesse A; Watson, Douglas J; Shi, Hongliang; Lin, Stephen L; Kuebler, Juergen; Schriver, Robert C; Santanello, Nancy C; Rochester, George; Porter, Jane B; Oster, Manfred; Mehrotra, Devan V; Li, Zhengqing; King, Eileen C; Harpur, Ernest S; Hall, David B

2009-10-01

The Safety Planning, Evaluation and Reporting Team (SPERT) was formed in 2006 by the Pharmaceutical Research and Manufacturers of America. SPERT's goal was to propose a pharmaceutical industry standard for safety planning, data collection, evaluation, and reporting, beginning with planning first-in-human studies and continuing through the planning of the post-product-approval period. SPERT's recommendations are based on our review of relevant literature and on consensus reached in our discussions. An important recommendation is that sponsors create a Program Safety Analysis Plan early in development. We also give recommendations for the planning of repeated, cumulative meta-analyses of the safety data obtained from the studies conducted within the development program. These include clear definitions of adverse events of special interest and standardization of many aspects of data collection and study design. We describe a 3-tier system for signal detection and analysis of adverse events and highlight proposals for reducing "false positive" safety findings. We recommend that sponsors review the aggregated safety data on a regular and ongoing basis throughout the development program, rather than waiting until the time of submission. We recognize that there may be other valid approaches. The proactive approach we advocate has the potential to benefit patients and health care providers by providing more comprehensive safety information at the time of new product marketing and beyond.

General RMP Guidance - Chapter 7: Prevention Program (Program 3)

EPA Pesticide Factsheets

Many Program 3 processes are already addressed by the OSHA Process Safety Management Program, which covers on-site consequences. So for compliance with the risk management program, process hazard analysis teams must consider potential offsite consequences.

NASA Range Safety Annual Report 2007

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2007-01-01

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

Cross-modal work helps OMC improve the safety of commercial transportation

DOT National Transportation Integrated Search

1997-01-01

This article describes the Commercial Vehicle Information System (CVIS), designed to deploy a national safety program for the U.S. commercial trucking fleet. CVIS is built around a safety analysis algorithm called SafeStat which constructs a profile ...

10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... assurance program will be implemented; (26) The applicant's organizational structure, allocations or... presents a safety analysis of the structures, systems, and components of the facility as a whole. The final... contain an analysis and evaluation of the major structures, systems, and components of the facility that...

A qualitative evaluation of fire safety education programs for older adults.

PubMed

Diekman, Shane T; Stewart, Tamara A; Teh, S Leesia; Ballesteros, Michael F

2010-03-01

This article presents a qualitative evaluation of six fire safety education programs for older adults delivered by public fire educators. Our main aims were to explore how these programs are implemented and to determine important factors that may lead to program success, from the perspectives of the public fire educators and the older adults. For each program, we interviewed the public fire educator(s), observed the program in action, and conducted focus groups with older adults attending the program. Analysis revealed three factors that were believed to facilitate program success (established relationships with the older adult community, rapport with older adult audiences, and presentation relevance) as well as three challenges (lack of a standardized curriculum and program implementation strategies, attendance difficulties, and physical limitations due to age). More fire safety education should be developed for older adult populations. For successful programs, public fire educators should address the specific needs of their local older adult community.

The impact of a child passenger restraint law and a public information and education program on child passenger safety in Tennessee

DOT National Transportation Integrated Search

1980-10-01

This report provides an analysis of the impact of child passenger protection legislation and a public information and education (PI&E) program on child passenger safety in Tennessee. This study is unique in that Tennessee was the first state to pass ...

SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spraker, M; Nyflot, M; Ford, E

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposuremore » to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing resident exposure to specific topics may increase their confidence.« less

49 CFR 240.309 - Railroad oversight responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... reported train accidents attributed to poor safety performance by locomotive engineers; (3) The number and... and analysis concerning the administration of its program for responding to detected instances of poor... analysis shall involve: (1) The number and nature of the instances of detected poor safety conduct...

Implementation of Programmatic Quality and the Impact on Safety

NASA Technical Reports Server (NTRS)

Huls, Dale Thomas; Meehan, Kevin

2005-01-01

The purpose of this paper is to discuss the implementation of a programmatic quality assurance discipline within the International Space Station Program and the resulting impact on safety. NASA culture has continued to stress safety at the expense of quality when both are extremely important and both can equally influence the success or failure of a Program or Mission. Although safety was heavily criticized in the media after Colimbiaa, strong case can be made that it was the failure of quality processes and quality assurance in all processes that eventually led to the Columbia accident. Consequently, it is possible to have good quality processes without safety, but it is impossible to have good safety processes without quality. The ISS Program quality assurance function was analyzed as representative of the long-term manned missions that are consistent with the President s Vision for Space Exploration. Background topics are as follows: The quality assurance organizational structure within the ISS Program and the interrelationships between various internal and external organizations. ISS Program quality roles and responsibilities with respect to internal Program Offices and other external organizations such as the Shuttle Program, JSC Directorates, NASA Headquarters, NASA Contractors, other NASA Centers, and International Partner/participants will be addressed. A detailed analysis of implemented quality assurance responsibilities and functions with respect to NASA Headquarters, the JSC S&MA Directorate, and the ISS Program will be presented. Discussions topics are as follows: A comparison of quality and safety resources in terms of staffing, training, experience, and certifications. A benchmark assessment of the lessons learned from the Columbia Accident Investigation (CAB) Report (and follow-up reports and assessments), NASA Benchmarking, and traditional quality assurance activities against ISS quality procedures and practices. The lack of a coherent operational and sustaining quality assurance strategy for long-term manned space flight. An analysis of the ISS waiver processes and the Problem Reporting and Corrective Action (PRACA) process implemented as quality functions. Impact of current ISS Program procedures and practices with regards to operational safety and risk A discussion regarding a "defense-in-depth" approach to quality functions will be provided to address the issue of "integration vs independence" with respect to the roles of Programs, NASA Centers, and NASA Headquarters. Generic recommendations are offered to address the inadequacies identified in the implementation of ISS quality assurance. A reassessment by the NASA community regarding the importance of a "quality culture" as a component within a larger "safety culture" will generate a more effective and value-added functionality that will ultimately enhance safety.

Track train dynamics analysis and test program: Methodology development for the derailment safety analysis of six-axle locomotives

NASA Technical Reports Server (NTRS)

Marcotte, P. P.; Mathewson, K. J. R.

1982-01-01

The operational safety of six axle locomotives is analyzed. A locomotive model with corresponding data on suspension characteristics, a method of track defect characterization, and a method of characterizing operational safety are used. A user oriented software package was developed as part of the methodology and was used to study the effect (on operational safety) of various locomotive parameters and operational conditions such as speed, tractive effort, and track curvature. The operational safety of three different locomotive designs was investigated.

75 FR 63609 - Oil and Gas and Sulphur Operations in the Outer Continental Shelf-Safety and Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... safety of the offshore facility, including ensuring that all contractors and subcontractors have safety... safety analysis (task level); (3) Procedures to verify that contractors are conducting their activities in accordance with the operator's SEMS program and an evaluation to ensure that contractors have the...

An Independent Evaluation of the FMEA/CIL Hazard Analysis Alternative Study

NASA Technical Reports Server (NTRS)

Ray, Paul S.

1996-01-01

The present instruments of safety and reliability risk control for a majority of the National Aeronautics and Space Administration (NASA) programs/projects consist of Failure Mode and Effects Analysis (FMEA), Hazard Analysis (HA), Critical Items List (CIL), and Hazard Report (HR). This extensive analytical approach was introduced in the early 1970's and was implemented for the Space Shuttle Program by NHB 5300.4 (1D-2. Since the Challenger accident in 1986, the process has been expanded considerably and resulted in introduction of similar and/or duplicated activities in the safety/reliability risk analysis. A study initiated in 1995, to search for an alternative to the current FMEA/CIL Hazard Analysis methodology generated a proposed method on April 30, 1996. The objective of this Summer Faculty Study was to participate in and conduct an independent evaluation of the proposed alternative to simplify the present safety and reliability risk control procedure.

Lessons learned from the Galileo and Ulysses flight safety review experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Gary L.

In preparation for the launches of the Galileo and Ulysses spacecraft, a very comprehensive aerospace nuclear safety program and flight safety review were conducted. A review of this work has highlighted a number of important lessons which should be considered in the safety analysis and review of future space nuclear systems. These lessons have been grouped into six general categories: (1) establishment of the purpose, objectives and scope of the safety process; (2) establishment of charters defining the roles of the various participants; (3) provision of adequate resources; (4) provision of timely peer-reviewed information to support the safety program; (5)more » establishment of general ground rules for the safety review; and (6) agreement on the kinds of information to be provided from the safety review process.« less

John M. Eisenberg Patient Safety Awards. System innovation: Veterans Health Administration National Center for Patient Safety.

PubMed

Heget, Jeffrey R; Bagian, James P; Lee, Caryl Z; Gosbee, John W

2002-12-01

In 1998 the Veterans Health Administration (VHA) created the National Center for Patient Safety (NCPS) to lead the effort to reduce adverse events and close calls systemwide. NCPS's aim is to foster a culture of safety in the Department of Veterans Affairs (VA) by developing and providing patient safety programs and delivering standardized tools, methods, and initiatives to the 163 VA facilities. To create a system-oriented approach to patient safety, NCPS looked for models in fields such as aviation, nuclear power, human factors, and safety engineering. Core concepts included a non-punitive approach to patient safety activities that emphasizes systems-based learning, the active seeking out of close calls, which are viewed as opportunities for learning and investigation, and the use of interdisciplinary teams to investigate close calls and adverse events through a root cause analysis (RCA) process. Participation by VA facilities and networks was voluntary. NCPS has always aimed to develop a program that would be applicable both within the VA and beyond. NCPS's full patient safety program was tested and implemented throughout the VA system from November 1999 to August 2000. Program components included an RCA system for use by caregivers at the front line, a system for the aggregate review of RCA results, information systems software, alerts and advisories, and cognitive acids. Following program implementation, NCPS saw a 900-fold increase in reporting of close calls of high-priority events, reflecting the level of commitment to the program by VHA leaders and staff.

77 FR 55371 - System Safety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

...-based rule and FRA seeks comments on all aspects of the proposed rule. An SSP would be implemented by a... SSP would be the risk-based hazard management program and risk-based hazard analysis. A properly implemented risk-based hazard management program and risk-based hazard analysis would identify the hazards and...

Probabilistic Risk Assessment Procedures Guide for NASA Managers and Practitioners (Second Edition)

NASA Technical Reports Server (NTRS)

Stamatelatos,Michael; Dezfuli, Homayoon; Apostolakis, George; Everline, Chester; Guarro, Sergio; Mathias, Donovan; Mosleh, Ali; Paulos, Todd; Riha, David; Smith, Curtis;

Randomized controlled trial to determine the effectiveness of an interactive multimedia food safety education program for clients of the special supplemental nutrition program for women, infants, and children.

PubMed

Trepka, Mary Jo; Newman, Frederick L; Davila, Evelyn P; Matthew, Karen J; Dixon, Zisca; Huffman, Fatma G

2008-06-01

Pregnant women and the very young are among those most susceptible to foodborne infections and at high risk of a severe outcome from foodborne infections. To determine if interactive multimedia is a more effective method than pamphlets for delivering food safety education to Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) clients. A randomized controlled trial of WIC clients was conducted. Self-reported food safety practices were compared between pre- and postintervention questionnaires completed >or=2 months after the intervention. Pregnant WIC clients or female caregivers (usually mothers) of WIC clients who were 18 years of age or older and able to speak and read English were recruited from an inner-city WIC clinic. Participants were randomized to receive food safety pamphlets or complete an interactive multimedia food safety education program on a computer kiosk. Change from pre- to postintervention food safety scores. A mean food safety score was determined for each participant for the pre- and postintervention questionnaires. The scores were used in a two-group repeated measures analysis of variance. Of the 394 participants, 255 (64.7%) completed the postintervention questionnaire. Satisfaction with the program was high especially among those with no education beyond high school. When considering a repeated measures analysis of variance model with the two fixed between-subject effects of group and age, a larger improvement in score in the interactive multimedia group than in the pamphlet group (P=0.005) was found, but the size of the group effect was small (partial eta(2)=0.033). Women aged 35 years or older in the interactive multimedia group had the largest increase in score. The interactive multimedia was well-accepted and resulted in improved self-reported food safety practices, suggesting that interactive multimedia is an effective option for food safety education in WIC clinics.

The Role and Quality of Software Safety in the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

The Pennsylvania certified safety committee program: an evaluation of participation and effects on work injury rates.

PubMed

Liu, Hangsheng; Burns, Rachel M; Schaefer, Agnes G; Ruder, Teague; Nelson, Christopher; Haviland, Amelia M; Gray, Wayne B; Mendeloff, John

2010-08-01

Since 1994, Pennsylvania, like several other states, has provided a 5% discount on workers' compensation insurance premiums for firms with a certified joint labor management safety committee. This study explored the factors affecting program participation and evaluated the effect of this program on work injuries. Using Pennsylvania unemployment insurance data (1996-2006), workers' compensation data (1998-2005), and the safety committee audit data (1999-2007), we conducted propensity score matching and regression analysis on the program's impact on injury rates. Larger firms, firms with higher injury rates, firms in high risk industries, and firms without labor unions were more likely to join the safety committee program and less likely to drop out of the program. The injury rates of participants did not decline more than the rates for non-participants; however, rates at participant firms with good compliance dropped more than the rates at participant firms with poor compliance. Firm size and prior injury rates are key predictors of program participation. Firms that complied with the requirement to train their safety committee members did experience reductions in injuries, but non-compliance with that and other requirements was so widespread that no overall impact of the program could be detected. Copyright 2010 Wiley-Liss, Inc.

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

The in-depth safety assessment (ISA) pilot projects in Ukraine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kot, C. A.

1998-02-10

Ukraine operates pressurized water reactors of the Soviet-designed type, VVER. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs). After approval of the SARS by the Ukrainian Nuclear Regulatory Authority, the plants will be granted longer-term operating licenses. In September 1995, the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine issued a new contents requirement for the safety analysis reports of VVERs in Ukraine. It contains requirements in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. Themore » DBA requirements are an expanded version of the older SAR requirements. The last two requirements, on PRA and BDBA, are new. The US Department of Energy (USDOE), through the International Nuclear Safety Program (INSP), has initiated an assistance and technology transfer program to Ukraine to assist their nuclear power stations in developing a Western-type technical basis for the new SARS. USDOE sponsored In-Depth Safety Assessments (ISAs) have been initiated at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1. USDOE/INSP have structured the ISA program in such a way as to provide maximum assistance and technology transfer to Ukraine while encouraging and supporting the Ukrainian plants to take the responsibility and initiative and to perform the required assessments.« less

Implementation and Evaluation of the Safety Net Specialty Care Program in the Denver Metropolitan Area

PubMed Central

Fort, Meredith P; Namba, Lynnette M; Dutcher, Sarah; Copeland, Tracy; Bermingham, Neysa; Fellenz, Chris; Lantz, Deborah; Reusch, John J; Bayliss, Elizabeth A

2017-01-01

Objectives: In response to limited access to specialty care in safety-net settings, an integrated delivery system and three safety-net organizations in the Denver, CO, metropolitan area launched a unique program in 2013. The program offers safety-net providers the option to electronically consult with specialists. Uninsured patients may be seen by specialists in office visits for a defined set of services. This article describes the program, identifies aspects that have worked well and areas that need improvement, and offers lessons learned. Methods: We quantified electronic consultations (e-consults) between safety-net clinicians and specialists, and face-to-face specialist visits between May 2013 and December 2014. We reviewed and categorized all e-consults from November and December 2014. In 2015, we interviewed 21 safety-net clinicians and staff, 12 specialists, and 10 patients, and conducted a thematic analysis to determine factors facilitating and limiting optimal program use. Results: In the first 20 months of the program, safety-net clinicians at 23 clinics made 602 e-consults to specialists, and 81 patients received face-to-face specialist visits. Of 204 primary care clinicians, 103 made e-consults; 65 specialists participated in the program. Aspects facilitating program use were referral case managers’ involvement and the use of clear, concise questions in e-consults. Key recommendations for process improvement were to promote an understanding of the different health care contexts, support provider-to-provider communication, facilitate hand-offs between settings, and clarify program scope. Conclusion: Participants perceived the program as responsive to their needs, yet opportunities exist for continued uptake and expansion. Communitywide efforts to assess and address needs remain important. PMID:28241908

49 CFR 219.211 - Analysis and follow-up.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Program Manager, Office of Safety, FRA, 1200 New Jersey Avenue, SE., Washington, DC 20590 within 45 days... Safety Board. (c) With respect to a surviving employee, a test reported as positive for alcohol or a... of each review to the Associate Administrator for Safety, FRA, Washington, DC 20590. Such report must...

RMP Guidance for Chemical Distributors - Chapter 7: Prevention Program (Program 3)

EPA Pesticide Factsheets

The OSHA Process Safety Management program has legal authority for on-site consequences, EPA's Prevention Program for offsite consequences, so your process hazard analysis (PHA) team may have to assess new hazards to the public and offsite environment.

The implementation and assessment of a quality and safety culture education program in a large radiation oncology department.

PubMed

Woodhouse, Kristina D; Volz, Edna; Bellerive, Marc; Bergendahl, Howard W; Gabriel, Peter E; Maity, Amit; Hahn, Stephen M; Vapiwala, Neha

2016-01-01

In 2010, the American Society for Radiation Oncology launched a national campaign to improve patient safety in radiation therapy. One recommendation included the expansion of educational programs dedicated to quality and safety. We subsequently implemented a quality and safety culture education program (Q-SCEP) in our large radiation oncology department. The purpose of this study is to describe the design, implementation, and impact of this Q-SCEP. In 2010, we instituted a comprehensive Q-SCEP, consisting of a longitudinal series of lectures, meetings, and interactive workshops. Participation was mandatory for all department members across all network locations. Electronic surveys were administered to assess employee engagement, knowledge retention, preferred learning styles, and the program's overall impact. The Agency for Healthcare Research and Quality (AHRQ) Survey on Patient Safety Culture was administered. Analysis of variance was used for statistical analysis. Between 2010 and 2015, 100% of targeted staff participated in Q-SCEP. Thirty-three percent (132 of 400) and 30% (136 of 450) responded to surveys in 2012 and 2014, respectively. Mean scores improved from 73% to 89% (P < .001), with the largest improvement seen among therapists (+21.7%). The majority strongly agreed that safety culture education was critical to performing their jobs well. Full course compliance was achieved despite the sizable number of personnel and treatment centers. Periodic assessments demonstrated high knowledge retention, which significantly improved over time in nearly all department divisions. Additionally, our AHRQ patient safety grade remains high and continues to improve. These results will be used to further enhance ongoing internal safety initiatives and to inform future innovative efforts. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

A socio-cognitive strategy to address farmers' tolerance of high risk work: Disrupting the effects of apprenticeship of observation.

PubMed

Mazur, Joan M; Westneat, Susan

2017-02-01

Why do generations of farmers tolerate the high-risk work of agricultural work and resist safe farm practices? This study presents an analysis inspired by empirical data from studies conducted from 1993 to 2012 on the differing effects of farm safety interventions between participants who live or work on farms and those who don't, when both were learning to be farm safety advocates. Both groups show statistically significant gains in knowledge and behavioral change proxy measures. However, non-farm participants' gains consistently outstripped their live/work farm counterparts. Drawing on socio-cultural perspectives, a grounded theory qualitative analysis focused on identifying useful constructs to understand the farmers' resistance to adopt safety practices. Understanding apprenticeships of observation and its relation to experiential learning over time can expose sources of deeply anchored beliefs and how they operate insidiously to promote familiar, albeit unsafe farming practices. The challenge for intervention-prevention programs becomes how to disrupt what has been learned during these apprenticeships of observation and to address what has been obscured during this powerful socialization process. Implications focus on the design and implementation of farm safety prevention and education programs. First, farm safety advocates and prevention researchers need to attend to demographics and explicitly explore the prior experiences and background of safety program participants. Second, farm youth in particular need to explore, explicitly, their own apprenticeships of observations, preferably through the use of new social media and or digital forms of expression, resulting in a story repair process. Third, careful study of the organization of work and farm experiences and practices need to provide the foundations for intervention programs. Finally, it is crucial that farm safety programs understand apprenticeships of observation are generational and ongoing over time, and interventions prevention programs need to be 'in it' for the long haul. Copyright © 2016. Published by Elsevier Ltd.

Risk analysis based CWR track buckling safety evaluations

DOT National Transportation Integrated Search

2001-01-01

As part of the Federal Railroad Administrations (FRA) track systems research program, the US DOTS Volpe Center is conducting analytic and experimental investigations to evaluate track lateral strength and stability limits for improved safety an...

Medication safety programs in primary care: a scoping review.

PubMed

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome measures. The objectives, inclusion criteria and methods for this scoping review were specified in advance and documented in a protocol that was previously published. This scoping review included nine studies published over an eight-year period that investigated or described the effects of medication safety programs in primary care settings. We classified each of the nine included studies into three main sections according to whether they included an organizational, professional or patient component. The organizational component is aimed at changing the structure of the organization to implement the intervention, the professional component is aimed at the healthcare professionals involved in implementing the interventions, and the patient component is aimed at counseling and education of the patient. All of the included studies had different types of medication safety programs. The programs ranged from complex interventions including pharmacists and teams of healthcare professionals to educational packages for patients and computerized system interventions. The outcome measures described in the included studies were medication error incidence, adverse events and number of drug-related problems. Multi-faceted medication safety programs are likely to vary in characteristics. They include educational training, quality improvement tools, informatics, patient education and feedback provision. The most likely outcome measure for these programs is the incidence of medication errors and reported adverse events or drug-related problems.

Integrated Hybrid System Architecture for Risk Analysis

NASA Technical Reports Server (NTRS)

Moynihan, Gary P.; Fonseca, Daniel J.; Ray, Paul S.

2010-01-01

A conceptual design has been announced of an expert-system computer program, and the development of a prototype of the program, intended for use as a project-management tool. The program integrates schedule and risk data for the purpose of determining the schedule applications of safety risks and, somewhat conversely, the effects of changes in schedules on changes on safety. It is noted that the design has been delivered to a NASA client and that it is planned to disclose the design in a conference presentation.

Technology Overview for Advanced Aircraft Armament System Program.

DTIC Science & Technology

1981-05-01

availability of methods or systems for improving stores and armament safety. Of particular importance are aspects of safety involving hazards analysis ...flutter virtually insensitive to inertia and center-of- gravity location of store - Simplifies and reduces analysis and testing required to flutter- clear...status. Nearly every existing reliability analysis and discipline that prom- ised a positive return on reliability performance was drawn out, dusted

Report on SARS backfit evaluation, Catalytic, Inc. Solvent Refined Coal Pilot Plant, Wilsonville, Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

A site visit was made in company with the DOE-OPTA-EA Safety and Health Official for the purpose of providing that official with technical assistance in evaluating the validity of an earlier DOE-OPTA recommendation exempting this facility from the Safety and Analysis and Review backfit requirements of DOE Order 5481.1. A further purpose of the visit was to assess and evaluate the occupational safety and health program at this facility, as compared with the criteria and guidelines contained in ASFE Order 5481.1. Adequate documentation regarding compliance with codes, standards, and regulations were observed at this facility. There is in existence anmore » ongoing continuous safety analysis effort for both modifications or additions to this facility. Adequate environmental safeguards and plans and procedures were observed. The SARS backfit exemption is appropriate. The occupational safety and health program is in many ways a model for the scope of work and nature of hazards involved, and is consistent with ASFE guidelines and statutory requirements.« less

Evaluating the Effectiveness of an Educational Intervention to Improve the Patient Safety Attitudes of Intern Pharmacists

PubMed Central

Fois, Romano A.; McLachlan, Andrew J.; Chen, Timothy F.

2017-01-01

Objective. To evaluate the effectiveness of a face-to-face educational intervention in improving the patient safety attitudes of intern pharmacists. Methods. A patient safety education program was delivered to intern pharmacists undertaking The University of Sydney Intern Training Program in 2014. Their patient safety attitudes were evaluated immediately prior to, immediately after, and three-months post-intervention. Underlying attitudinal factors were identified using exploratory factor analysis. Changes in factor scores were examined using analysis of variance. Results. Of the 120 interns enrolled, 95 (78.7%) completed all three surveys. Four underlying attitudinal factors were identified: attitudes towards addressing errors, questioning behaviors, blaming individuals, and reporting errors. Improvements in all attitudinal factors were evident immediately after the intervention. However, only improvements in attitudes towards blaming individuals involved in errors were sustained at three months post-intervention. Conclusion. The educational intervention was associated with short-term improvements in pharmacist interns’ patient safety attitudes. However, other factors likely influenced their attitudes in the longer term. PMID:28289295

Evaluating the Effectiveness of an Educational Intervention to Improve the Patient Safety Attitudes of Intern Pharmacists.

PubMed

Walpola, Ramesh L; Fois, Romano A; McLachlan, Andrew J; Chen, Timothy F

2017-02-25

Objective. To evaluate the effectiveness of a face-to-face educational intervention in improving the patient safety attitudes of intern pharmacists. Methods. A patient safety education program was delivered to intern pharmacists undertaking The University of Sydney Intern Training Program in 2014. Their patient safety attitudes were evaluated immediately prior to, immediately after, and three-months post-intervention. Underlying attitudinal factors were identified using exploratory factor analysis. Changes in factor scores were examined using analysis of variance. Results. Of the 120 interns enrolled, 95 (78.7%) completed all three surveys. Four underlying attitudinal factors were identified: attitudes towards addressing errors, questioning behaviors, blaming individuals, and reporting errors. Improvements in all attitudinal factors were evident immediately after the intervention. However, only improvements in attitudes towards blaming individuals involved in errors were sustained at three months post-intervention. Conclusion. The educational intervention was associated with short-term improvements in pharmacist interns' patient safety attitudes. However, other factors likely influenced their attitudes in the longer term.

Railroad safety program, task 2

NASA Technical Reports Server (NTRS)

1983-01-01

Aspects of railroad safety and the preparation of a National Inspection Plan (NIP) for rail safety improvement are examined. Methodology for the allocation of inspection resources, preparation of a NIP instruction manual, and recommendations for future NIP, are described. A statistical analysis of regional rail accidents is presented with causes and suggested preventive measures included.

Analysis and comparison of five contractor safety and health manuals (EG and G, SR II, ORNL, Ashland, and MLGW)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowder, C.; Hurley, T.

1981-03-01

An analysis is presented of five safety and health contractor manuals against the requirements of the FE OSH Manual (FE 5480.1), and a breakdown in chart form of how the manuals compare to each other is given. It is pointed out that the manuals are inadequate, but that site visits will be necessary to determine the actual comprehensiveness of the facilities' safety and health programs.

Risk analysis based CWR track buckling safety evaluations

DOT National Transportation Integrated Search

1999-12-01

As part of the Federal Railroad Administration's (FRA) track systems research program, the US DOT'S Volpe Center is conducting analytic and experimental investigations to evaluate track lateral strength and stability limits for improved safety and pe...

A patient safety objective structured clinical examination.

PubMed

Singh, Ranjit; Singh, Ashok; Fish, Reva; McLean, Don; Anderson, Diana R; Singh, Gurdev

2009-06-01

There are international calls for improving education for health care workers around certain core competencies, of which patient safety and quality are integral and transcendent parts. Although relevant teaching programs have been developed, little is known about how best to assess their effectiveness. The objective of this work was to develop and implement an objective structured clinical examination (OSCE) to evaluate the impact of a patient safety curriculum. The curriculum was implemented in a family medicine residency program with 47 trainees. Two years after commencing the curriculum, a patient safety OSCE was developed and administered at this program and, for comparison purposes, to incoming residents at the same program and to residents at a neighboring residency program. All 47 residents exposed to the training, all 16 incoming residents, and 10 of 12 residents at the neighboring program participated in the OSCE. In a standardized patient case, error detection and error disclosure skills were better among trained residents. In a chart-based case, trained residents showed better performance in identifying deficiencies in care and described more appropriate means of addressing them. Third year residents exposed to a "Systems Approach" course performed better at system analysis and identifying system-based solutions after the course than before. Results suggest increased systems thinking and inculcation of a culture of safety among residents exposed to a patient safety curriculum. The main weaknesses of the study are its small size and suboptimal design. Much further investigation is needed into the effectiveness of patient safety curricula.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the third volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of appendices C through U of the report« less

Incident reporting: Its role in aviation safety and the acquisition of human error data

NASA Technical Reports Server (NTRS)

Reynard, W. D.

1983-01-01

The rationale for aviation incident reporting systems is presented and contrasted to some of the shortcomings of accident investigation procedures. The history of the United State's Aviation Safety Reporting System (ASRS) is outlined and the program's character explained. The planning elements that resulted in the ASRS program's voluntary, confidential, and non-punitive design are discussed. Immunity, from enforcement action and misuse of the volunteered data, is explained and evaluated. Report generation techniques and the ASRS data analysis process are described; in addition, examples of the ASRS program's output and accomplishments are detailed. Finally, the value of incident reporting for the acquisition of safety information, particularly human error data, is explored.

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Sources of Safety Data and Statistical Strategies for Design and Analysis: Clinical Trials.

PubMed

Zink, Richard C; Marchenko, Olga; Sanchez-Kam, Matilde; Ma, Haijun; Jiang, Qi

2018-03-01

There has been an increased emphasis on the proactive and comprehensive evaluation of safety endpoints to ensure patient well-being throughout the medical product life cycle. In fact, depending on the severity of the underlying disease, it is important to plan for a comprehensive safety evaluation at the start of any development program. Statisticians should be intimately involved in this process and contribute their expertise to study design, safety data collection, analysis, reporting (including data visualization), and interpretation. In this manuscript, we review the challenges associated with the analysis of safety endpoints and describe the safety data that are available to influence the design and analysis of premarket clinical trials. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from clinical trials compared to other sources. Clinical trials are an important source of safety data that contribute to the totality of safety information available to generate evidence for regulators, sponsors, payers, physicians, and patients. This work is a result of the efforts of the American Statistical Association Biopharmaceutical Section Safety Working Group.

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a difference for the safety of the Space Shuttle Vehicle, its crew, and personnel. Because of the MSERP's valuable contribution to the assessment of safety risk for the SSP, this paper also proposes an enhanced Panel concept that takes this successful partnership concept to a higher level of 'true partnership'. The proposed panel is aimed to be responsible for the review and assessment of all risk relative to Safety for new and future aerospace and related programs.

7 CFR 210.13 - Facilities management.

Code of Federal Regulations, 2013 CFR

2013-01-01

... authority with a food safety program based on traditional hazard analysis and critical control point (HACCP... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Requirements for School Food Authority...

7 CFR 210.13 - Facilities management.

Code of Federal Regulations, 2011 CFR

2011-01-01

... authority with a food safety program based on traditional hazard analysis and critical control point (HACCP... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Requirements for School Food Authority...

7 CFR 210.13 - Facilities management.

Code of Federal Regulations, 2012 CFR

2012-01-01

... authority with a food safety program based on traditional hazard analysis and critical control point (HACCP... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Requirements for School Food Authority...

7 CFR 210.13 - Facilities management.

Code of Federal Regulations, 2014 CFR

2014-01-01

... authority with a food safety program based on traditional hazard analysis and critical control point (HACCP... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Requirements for School Food Authority...

Current and anticipated uses of thermal hydraulic codes at the Japan Atomic Energy Research Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akimoto, Hajime; Kukita; Ohnuki, Akira

1997-07-01

The Japan Atomic Energy Research Institute (JAERI) is conducting several research programs related to thermal-hydraulic and neutronic behavior of light water reactors (LWRs). These include LWR safety research projects, which are conducted in accordance with the Nuclear Safety Commission`s research plan, and reactor engineering projects for the development of innovative reactor designs or core/fuel designs. Thermal-hydraulic and neutronic codes are used for various purposes including experimental analysis, nuclear power plant (NPP) safety analysis, and design assessment.

Psychology in nuclear power plants: an integrative approach to safety - general statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shikiar, R.

Since the accident at the Three Mile Island nuclear power plant on March 28, 1979, the commercial nuclear industry in the United States has paid increasing attention to the role of humans in overall plant safety. As the regulatory body with primary responsibility for ensuring public health and safety involving nuclear operations, the United States Nuclear Regulatory Commission (NRC) has also become increasingly involved with the ''human'' side of nuclear operations. The purpose of this symposium is to describe a major program of research and technical assistance that the Pacific Northwest Laboratory is performing for the NRC that deals withmore » the issues of safety at nuclear power plants (NPPs). This program addresses safety from several different levels of analysis, which are all important within the context of an integrative approach to system safety.« less

[Determinants in an occupational health and safety program implementation].

PubMed

Chaves, Sonia Cristina Lima; Santana, Vilma Sousa; de Leão, Inez Cristina Martins; de Santana, Jusiene Nogueira; de Almeida Lacerda, Lívia Maria Aragão

2009-03-01

To identify predictors for the degree to which a program that integrates occupational health surveillance with labor safety, and involves occupational health/safety specialists, company management, and employees, is implemented. This ecological study evaluated companies implementing the occupational health and safety program (OHSP) proposed by the state of Bahia's regional department of Serviço Social da Indústria (Social Services for Industry, SESI) during the 2005-2006 cycle. The companies that participated were randomly selected. Data were collected through interviews with key contacts within the companies and from technical reports issued by SESI. Multiple linear regression was used to identify factors related to the company, employee, occupational/safety specialist, and any subdimensions that might promote OHSP implementation. Of the 78 companies selected (3 384 employees), the degree to which OHSP was implemented was "advanced" in 24.4%, "intermediate" in 53.8%, and "initial" in 19.3%. Company-related, employee-related and specialist-related factors were positively associated with OHSP implementation (P < 0.001). The most important factor overall was the program's financial autonomy (beta = 4.40; P < 0.001). Bivariate analysis revealed that the degree of implementation was associated with the employees' level of health/safety knowledge (beta = 1.58; P < 0.05) and training (beta = 0.40; P < 0.001) and with communication between the occupational safety team (beta = 1.89; P < 0.01) and the health team (beta = 0.58; P < 0.05). These findings remained unchanged after adjustment for levels of education among managers and employees, salary/wages, company size, and risk. The time and resources available for employees to dedicate to occupational health and safety, the integration and reinforcement of employee and manager training programs, and improved relationship between occupational health and safety teams may contribute to the success of health and safety promotion efforts among employees.

FMCSA safety program effectiveness measurement compliance review effectiveness model results for carriers with compliance reviews in fiscal year 2009 : [analysis brief].

DOT National Transportation Integrated Search

2014-04-01

This Analysis Brief documents the methodology and results from the Compliance Review Effectiveness Model (CREM) for carriers receiving CRs in fiscal year (FY) 2009. The model measures the effectiveness of the compliance review (CR) program, one of th...

Corridor-wide Safety Data Analysis and Identification of Existing Successful Safety Programs

DOT National Transportation Integrated Search

2010-06-01

Many diverse factors contribute to motor vehicle crashes. States have multiple competing priorities and limited resources to address these priorities, so there is a need, particularly in our current economic climate, to prioritize interventions and s...

Rail Safety/Equipment Crashworthiness : Volume 1. A Systems Analysis of Injury Minimization in Rail Systems

DOT National Transportation Integrated Search

1978-07-01

The Department of Transportation, Transportation Systems Center (TSC), is providing technical assistance to the Federal Railroad Administration (FRA) in a program to improve railroad safety and efficiency by providing a technological basis for improv...

Analysis of West Virginia's graduated driver licensing program.

DOT National Transportation Integrated Search

2012-12-01

Motor vehicle collisions are the leading cause of death for individuals between the ages of 15-20 years old in the United States. Top safety concerns involving teen drivers include; safety belt use, impaired driving, and distracted driving. Rules tha...

An analysis of West Virginia's graduated driver licensing program.

DOT National Transportation Integrated Search

2012-12-01

Motor vehicle collisions are the leading cause of death for individuals between the ages of 15-20 years old in the United States. Top safety concerns involving teen drivers include; safety belt use, impaired driving, and distracted driving. Rules tha...

A summary description of the flammable gas tank safety program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, G.D.; Sherwood, D.J.

1994-10-01

Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the wastemore » suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks.« less

Changing conversations: teaching safety and quality in residency training.

PubMed

Voss, John D; May, Natalie B; Schorling, John B; Lyman, Jason A; Schectman, Joel M; Wolf, Andrew M D; Nadkarni, Mohan M; Plews-Ogan, Margaret

2008-11-01

Improving patient safety and quality in health care is one of medicine's most pressing challenges. Residency training programs have a unique opportunity to meet this challenge by training physicians in the science and methods of patient safety and quality improvement (QI).With support from the Health Resources and Services Administration, the authors developed an innovative, longitudinal, experiential curriculum in patient safety and QI for internal medicine residents at the University of Virginia. This two-year curriculum teaches the critical concepts and skills of patient safety and QI: systems thinking and human factors analysis, root cause analysis (RCA), and process mapping. Residents apply these skills in a series of QI and patient safety projects. The constructivist educational model creates a learning environment that actively engages residents in improving the quality and safety of their medical practice.Between 2003 and 2005, 38 residents completed RCAs of adverse events. The RCAs identified causes and proposed useful interventions that have produced important care improvements. Qualitative analysis demonstrates that the curriculum shifted residents' thinking about patient safety to a systems-based approach. Residents completed 237 outcome assessments during three years. Results indicate that seminars met predefined learning objectives and were interactive and enjoyable. Residents strongly believe they gained important skills in all domains.The challenge to improve quality and safety in health care requires physicians to learn new knowledge and skills. Graduate medical education can equip new physicians with the skills necessary to lead the movement to safer and better quality of care for all patients.This article is part of a theme issue of Academic Medicine on the Title VII health professions training programs.

Strengths, weaknesses, opportunities, and threats analysis of integrating the World Health Organization patient safety curriculum into undergraduate medical education in Pakistan: a qualitative case study.

PubMed

Misbah, Samreen; Mahboob, Usman

2017-01-01

The purpose of this study was to conduct a strengths, weaknesses, opportunities, and threats (SWOT) analysis of integrating the World Health Organization (WHO) patient safety curriculum into undergraduate medical education in Pakistan. A qualitative interpretive case study was conducted at Riphah International University, Islamabad, from October 2016 to June 2017. The study included 9 faculty members and 1 expert on patient safety. The interviews were audiotaped, and a thematic analysis of the transcripts was performed using NVivo software. Four themes were derived based on the need analysis model. The sub-themes derived from the collected data were arranged under the themes of strengths, weaknesses, opportunities, and threats, in accordance with the principles of SWOT analysis. The strengths identified were the need for a formal patient safety curriculum and its early integration into the undergraduate program. The weaknesses were faculty awareness and participation in development programs. The opportunities were an ongoing effort to develop an appropriate curriculum, to improve the current culture of healthcare, and to use the WHO curricular resource guide. The threats were attitudes towards patient safety in Pakistani culture, resistance to implementation from different levels, and the role of regulatory authorities. The theme of patient safety needs to be incorporated early into the formal medical education curriculum, with the main goals of striving to do no harm and seeing mistakes as opportunities to learn. Faculty development activities need to be organized, and faculty members should to be encouraged to participate in them. The lack of a patient safety culture was identified as the primary reason for resistance to this initiative at many levels. The WHO curriculum, amended according to local institutional culture, can be implemented appropriately with support from the corresponding regulatory bodies.

Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-12-04

The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

Space Solar Power Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arif, Humayun; Barbosa, Hugo; Bardet, Christophe

1992-08-01

Information pertaining to the Space Solar Power Program is presented on energy analysis; markets; overall development plan; organizational plan; environmental and safety issues; power systems; space transportation; space manufacturing, construction, operations; design examples; and finance.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the first volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of an introduction, summary/conclusion, site description and assessment, description of facility, and description of operation.« less

Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

Effects of metric change on safety in the workplace for selected occupations

NASA Astrophysics Data System (ADS)

Lefande, J. M.; Pokorney, J. L.

1982-04-01

The study assesses the potential safety issues of metric conversion in the workplace. A purposive sample of 35 occupations based on injury and illnesses indexes were assessed. After an analysis of workforce population, hazard analysis and measurement sensitivity of the occupations, jobs were analyzed to identify potential safety hazards by industrial hygienists, safety engineers and academia. The study's major findings were as follows: No metric hazard experience was identified. An increased exposure might occur when particular jobs and their job tasks are going the transition from customary measurement to metric measurement. Well planned metric change programs reduce hazard potential. Metric safety issues are unresolved in the aviation industry.

Injuries to emergency medicine residents on EMS rotations.

PubMed

Cone, D C; McNamara, R M

1998-01-01

To study the incidence and nature of injuries sustained by emergency medicine (EM) residents during EMS rotations, and steps taken at EM residency programs to increase resident safety during field activities. An eight-question survey form was mailed to all 114 U.S. EM residency directors, with a second mailing to nonresponders eight weeks after the initial mailing. A total of 105 surveys were returned (92%). Six surveys were from new programs whose residents have not yet rotated on EMS. These were excluded from further analysis, leaving 99 programs. Of these, 91 (92%) reported no injuries. One EM resident died in a helicopter crash in 1985. Seven other injury events were reported: 1) facial lacerations, rib fractures, and a shoulder injury in an ambulance accident; 2) an open finger fracture (crushed by a backboard); 3) contusions and a concussion when an ambulance was struck by a fire engine; 4) a groin pull sustained while entering a helicopter; 5) bilateral metatarsal fractures in a fall; 6) rib fractures, a pneumothorax, and a concussion in an ambulance accident; and 7) "minor injuries" sustained in a crash while responding to a scene in a program-owned response vehicle. Actions taken at residency programs to reduce the risk of injury include the use of ballistic vests (four programs), requiring helmets on flights (five programs), and changing flight experience from mandatory to optional (two programs). Ten programs (10%) reported using ground scene safety lectures, and nine programs (15% of those offering flights) reported various types of flight safety instruction. Sixty-nine programs (70%) reported no formal field safety training or other active steps to increase resident safety on EMS rotations. Injuries sustained by EM residents during EMS rotations are uncommon but nontrivial, with several serious injuries and one fatality reported. The majority of EM residency programs have no formal safety training programs for EMS rotations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MITCHELL,GERRY W.; LONGLEY,SUSAN W.; PHILBIN,JEFFREY S.

This Safety Analysis Report (SAR) is prepared in compliance with the requirements of DOE Order 5480.23, Nuclear Safety Analysis Reports, and has been written to the format and content guide of DOE-STD-3009-94 Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Safety Analysis Reports. The Hot Cell Facility is a Hazard Category 2 nonreactor nuclear facility, and is operated by Sandia National Laboratories for the Department of Energy. This SAR provides a description of the HCF and its operations, an assessment of the hazards and potential accidents which may occur in the facility. The potential consequences and likelihood ofmore » these accidents are analyzed and described. Using the process and criteria described in DOE-STD-3009-94, safety-related structures, systems and components are identified, and the important safety functions of each SSC are described. Additionally, information which describes the safety management programs at SNL are described in ancillary chapters of the SAR.« less

Anomaly Analysis: NASA's Engineering and Safety Center Checks Recurring Shuttle Glitches

NASA Technical Reports Server (NTRS)

Morring, Frank, Jr.

2004-01-01

The NASA Engineering and Safety Center (NESC), set up in the wake of the Columbia accident to backstop engineers in the space shuttle program, is reviewing hundreds of recurring anomalies that the program had determined don't affect flight safety to see if in fact they might. The NESC is expanding its support to other programs across the agency, as well. The effort, which will later extend to the International Space Station (ISS), is a principal part of the attempt to overcome the normalization of deviance--a situation in which organizations proceeded as if nothing was wrong in the face of evidence that something was wrong--cited by sociologist Diane Vaughn as contributing to both space shuttle disasters.

The MIRTE Experimental Program: An Opportunity to Test Structural Materials in Various Configurations in Thermal Energy Spectrum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leclaire, Nicolas; Le Dauphin, Francois-Xavier; Duhamel, Isabelle

2014-11-04

The MIRTE (Materials in Interacting and Reflecting configurations, all Thicknesses) program was established to answer the needs of criticality safety practitioners in terms of experimental validation of structural materials and to possibly contribute to nuclear data improvement, which ultimately supports reactor safety analysis as well. MIRTE took the shape of a collaboration between the AREVA and ANDRA French industrialists and a noncommercial international funding partner such as the U.S. Department of Energy. The aim of this paper is to present the configurations of the MIRTE 1 and MIRTE 2 programs and to highlight the results of the titanium experiments recentlymore » published in the International Handbook of Evaluated Criticality Safety Benchmark Experiments.« less

[Involvement of local dietetics professionals in risk communication program on food safety in municipal governments and their attitude towards the program].

PubMed

Akamatsu, Rie; Nomura, Marika; Horiguchi, Itsuko; Tanaka, Hisako; Marui, Eiji

2009-01-01

The objective of this study is to gather statistical references on food safety education that encourages competence of food choice from the view-point of food safety. A survey on the involvement of the risk communication program on food safety in municipal governments and the attitude of local dietetics professionals towards the program was conducted. In November, 2006, self-reported questionnaires were mailed to 1990 local dietetics professionals who worked in municipal governments in Japan. Descriptive statistics and cross tables were used for data analysis. 1162 questionnaires were mailed and 1130 available surveys were returned. Among the respondents, 41.5% answered that they inform the community about food safety, but 49.9% answered that they did not get information from the community. Most of the respondents answered that risk communication of food safety was important; 21.8% answered "extremely agree" and 62.3% answered "rather agree" on a scale of four from "extremely agree" to "do not agree". More than one-half of the dietetics professionals answered that their confidence in conducting risk communication was low; 20.5% answered "no confidence" and 52.5% answered "hardly have confidence" on a scale of four from "without confidence" to "with confidence". More than 80% of the respondents answered that they needed "professional knowledge" and "support from professional agencies". This study suggests that educating local dietetics professionals about professional knowledge on food safety, and obtaining support from special agencies will be essential in the upgrade of risk communication program on food safety in a community.

Using Meta Analysis Techniques to Assess the Safety Effect of Red Light Running Cameras

DOT National Transportation Integrated Search

2002-02-01

Automated enforcement programs, including automated systems that are used to enforce red light running violations, have recently come under scrutiny regarding their value in terms of improving safety, their primary purpose. One of the major hurdles t...

Simulation for Prediction of Entry Article Demise (SPEAD): An Analysis Tool for Spacecraft Safety Analysis and Ascent/Reentry Risk Assessment

NASA Technical Reports Server (NTRS)

Ling, Lisa

2014-01-01

For the purpose of performing safety analysis and risk assessment for a potential off-nominal atmospheric reentry resulting in vehicle breakup, a synthesis of trajectory propagation coupled with thermal analysis and the evaluation of node failure is required to predict the sequence of events, the timeline, and the progressive demise of spacecraft components. To provide this capability, the Simulation for Prediction of Entry Article Demise (SPEAD) analysis tool was developed. The software and methodology have been validated against actual flights, telemetry data, and validated software, and safety/risk analyses were performed for various programs using SPEAD. This report discusses the capabilities, modeling, validation, and application of the SPEAD analysis tool.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Market analysis of collecting fundamental roadway data elements to support the highway safety improvement program.

DOT National Transportation Integrated Search

2011-06-01

Quality data are the foundation for making important decisions regarding the design, operation, and safety of : roadways. Using roadway and traffic data together with crash data can help agencies to make decisions that are : fiscally responsible and ...

77 FR 49859 - Proposed Traffic Records Program Assessment Advisory

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... States on the collection, management, and analysis of data used to inform highway and traffic safety... prioritize traffic safety issues and to choose appropriate countermeasures and evaluate their effectiveness. This document provides information on the contents, capabilities, and data quality attributes of an...

Waste Isolation Safety Assessment Program. Technical progress report for FY-1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandstetter, A.; Harwell, M.A.; Howes, B.W.

1979-07-01

Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of makingmore » those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis. (DC)« less

2009 Annual Progress Report: DOE Hydrogen Program, November 2009 (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2009-11-01

This report summarizes the hydrogen and fuel cell R&D activities and accomplishments of the DOE Hydrogen Program for FY2009. It covers the program areas of hydrogen production and delivery; fuel cells; manufacturing; technology validation; safety, codes and standards; education; and systems analysis.

Facilities Management: A Program for the 1980s.

ERIC Educational Resources Information Center

Kaiser, Harvey H.

1980-01-01

Successful facilities management is described as based on a 10-point comprehensive program including: (1) physical planning policy; (2) facilities analysis; (3) management audit; (4) space utilization; (5) capital programs; (6) deferred maintenance; (7) controlled maintenance; (8) energy conservation; (9) environmental quality, health, and safety;…

System safety in Stirling engine development

NASA Technical Reports Server (NTRS)

Bankaitis, H.

1981-01-01

The DOE/NASA Stirling Engine Project Office has required that contractors make safety considerations an integral part of all phases of the Stirling engine development program. As an integral part of each engine design subtask, analyses are evolved to determine possible modes of failure. The accepted system safety analysis techniques (Fault Tree, FMEA, Hazards Analysis, etc.) are applied in various degrees of extent at the system, subsystem and component levels. The primary objectives are to identify critical failure areas, to enable removal of susceptibility to such failures or their effects from the system and to minimize risk.

Minimally invasive surgical video analysis: a powerful tool for surgical training and navigation.

PubMed

Sánchez-González, P; Oropesa, I; Gómez, E J

2013-01-01

Analysis of minimally invasive surgical videos is a powerful tool to drive new solutions for achieving reproducible training programs, objective and transparent assessment systems and navigation tools to assist surgeons and improve patient safety. This paper presents how video analysis contributes to the development of new cognitive and motor training and assessment programs as well as new paradigms for image-guided surgery.

COLD-SAT feasibility study safety analysis

NASA Technical Reports Server (NTRS)

Mchenry, Steven T.; Yost, James M.

1991-01-01

The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

Requirements for significant problem reporting and trend analysis

NASA Technical Reports Server (NTRS)

1988-01-01

This handbook supplements policies, requirements, and procedures of NMI 8070.3 to ensure that NASA management at each organizational level is: fully aware of trends affecting both the level of safety and the potential for mission success established for both NASA manned space programs and its supporting institutions; fully and independently informed of problems that represent significant risk to the safety of all personnel (including the general populace) and to the success of a mission or operation through a program mechanism herein defined as Significant Problem Reporting; and in full agreement with the level of elimination of these problems through the closed-loop accounting of corrective actions. The requirements of this handbook are supportive of the agency's safety, reliability, maintainability, and quality assurance (SRM&QA) program objectives and are applicable to all organizational elements of NASA connected with or supporting developmental or operational manned space program/projects (including associated payloads) and the related institutional facilities.

The Principles of HACCP

USDA-ARS?s Scientific Manuscript database

HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company and NASA. They utilized this program to enhance the safety of the food for manned space flights. The USDA-FSIS implemented the HACCP approach to food safety in the meat and pou...

The Principles of HACCP

USDA-ARS?s Scientific Manuscript database

HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company and NASA. They utilized this program to enhance the safety of the food for manned space flights. The USDA-FSIS implemented the HACCP approach to food safety in the meat and p...

The Basics of HACCP

USDA-ARS?s Scientific Manuscript database

HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company and NASA. They utilized this program to enhance the safety of the food for manned space flights. The USDA-FSIS implemented the HACCP approach to food safety in the meat and poult...

Advanced bridge safety initiative : FRP flexural retrofit for concrete slab bridges - task 4 deliverables.

DOT National Transportation Integrated Search

2014-06-01

Concrete slab bridges are being examined as part of the MaineDOT Advanced Bridge Safety Initiative. Under Tasks : 1 3 a finite element analysis program is developed, validated and applied to twenty bridges. : Task 4 investigates and develops a no...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Radiological hazards related to possessing or processing licensed material at its facility; (ii) Chemical hazards of licensed material and hazardous chemicals produced from licensed material; (iii) Facility... performed by a team with expertise in engineering and process operations. The team shall include at least...

Prediction accident triangle in maintenance of underground mine facilities using Poisson distribution analysis

NASA Astrophysics Data System (ADS)

Khuluqi, M. H.; Prapdito, R. R.; Sambodo, F. P.

2018-04-01

In Indonesia, mining is categorized as a hazardous industry. In recent years, a dramatic increase of mining equipment and technological complexities had resulted in higher maintenance expectations that accompanied by the changes in the working conditions, especially on safety. Ensuring safety during the process of conducting maintenance works in underground mine is important as an integral part of accident prevention programs. Accident triangle has provided a support to safety practitioner to draw a road map in preventing accidents. Poisson distribution is appropriate for the analysis of accidents at a specific site in a given time period. Based on the analysis of accident statistics in the underground mine maintenance of PT. Freeport Indonesia from 2011 through 2016, it is found that 12 minor accidents for 1 major accident and 66 equipment damages for 1 major accident as a new value of accident triangle. The result can be used for the future need for improving the accident prevention programs.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

2014 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-11-01

The 2014 Annual Progress Report summarizes fiscal year 2014 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; market transformation; and systems analysis.

Safety considerations in the design and operation of large wind turbines

NASA Technical Reports Server (NTRS)

Reilly, D. H.

1979-01-01

The engineering and safety techniques used to assure the reliable and safe operation of large wind turbine generators utilizing the Mod 2 Wind Turbine System Program as an example is described. The techniques involve a careful definition of the wind turbine's natural and operating environments, use of proven structural design criteria and analysis techniques, an evaluation of potential failure modes and hazards, and use of a fail safe and redundant component engineering philosophy. The role of an effective quality assurance program, tailored to specific hardware criticality, and the checkout and validation program developed to assure system integrity are described.

Range Flight Safety Requirements

NASA Technical Reports Server (NTRS)

Loftin, Charles E.; Hudson, Sandra M.

2018-01-01

The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satyapal, Sunita

The 2011 Annual Progress Report summarizes fiscal year 2011 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; education; market transformation; and systems analysis.

RMP Guidance for Warehouses - Chapter 7: Prevention Program (Program 3)

EPA Pesticide Factsheets

If you are already complying with the OSHA Process Safety Management standard for on-site consequences, your process hazard analysis (PHA) team may have to assess new hazards that could affect the public or the environment offsite.

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

The 2013 Annual Progress Report summarizes fiscal year 2013 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; market transformation; and systems analysis.

Security analysis of boolean algebra based on Zhang-Wang digital signature scheme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Jinbin, E-mail: jbzheng518@163.com

2014-10-06

In 2005, Zhang and Wang proposed an improvement signature scheme without using one-way hash function and message redundancy. In this paper, we show that this scheme exits potential safety concerns through the analysis of boolean algebra, such as bitwise exclusive-or, and point out that mapping is not one to one between assembly instructions and machine code actually by means of the analysis of the result of the assembly program segment, and which possibly causes safety problems unknown to the software.

Introduction to the Principles of HACCP

USDA-ARS?s Scientific Manuscript database

HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company and NASA. They utilized this program to enhance the safety of the food for manned space flights. The USDA-FSIS implemented the HACCP approach to food safety in the meat and poult...

The Seven Principles of HACCP

USDA-ARS?s Scientific Manuscript database

HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company and NASA. They utilized this program to enhance the safety of the food for manned space flights. The USDA-FSIS implemented the HACCP approach to food safety in the meat and poult...

10 CFR Appendix A to Part 851 - Worker Safety and Health Functional Areas

Code of Federal Regulations, 2013 CFR

2013-01-01

... Information Technology. (1) Employee medical, psychological, and employee assistance program (EAP) records... site information (e.g., site characterization data, as-built drawings) provided by the construction... systems; (5) A safety analysis approved by the Head of DOE Field Element must be developed for the...

Response to in-depth safety audit of the L Lake sampling station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gladden, J.B.

1986-10-15

An in-depth safety audit of several of the facilities and operations supporting the Biological Monitoring Program on L Lake was conducted. Subsequent to the initial audit, the audit team evaluated the handling of samples taken for analysis of Naegleria fowleri at the 704-U laboratory facility.

75 FR 10490 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Member...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... Institute for Occupational Safety and Health (NIOSH), CDC, 1095 Willowdale Road, Morgantown, West Virginia... of Extramural Programs, National Institute for Occupational Safety and Health, CDC, 1600 Clifton Road... Analysis and Services Office, has been delegated the authority to sign Federal Register notices pertaining...

National Dam Safety Program. Watchung Lake Dam (NJ00767), Raritan River Basin, Stony Brook, Somerset County, New Jersey Phase I Inspection Report.

DTIC Science & Technology

1981-07-01

Safety Program Erosion Embankmients Watchung Lake Dam, N.J. Visual InspectionSeae IStructural Analysis Spillways 12M~ A0ST Acr (cathiue samvwgip @ta N...determined by a qualified professional consultant engaged by the owner using more sophisticated methods , procedures and studies within six months...be overtopped. (The SDF, in this instance, is one half of the Probable Maximum Flood). The decision to consider the spillway " inaae - quate" instead of

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farren Hunt

Idaho National Laboratory (INL) performed an Annual Effectiveness Review of the Integrated Safety Management System (ISMS), per 48 Code of Federal Regulations (CFR) 970.5223 1, “Integration of Environment, Safety and Health into Work Planning and Execution.” The annual review assessed Integrated Safety Management (ISM) effectiveness, provided feedback to maintain system integrity, and identified target areas for focused improvements and assessments for fiscal year (FY) 2013. Results of the FY 2012 annual effectiveness review demonstrated that the INL’s ISMS program was significantly strengthened. Actions implemented by the INL demonstrate that the overall Integrated Safety Management System is sound and ensures safemore » and successful performance of work while protecting workers, the public, and environment. This report also provides several opportunities for improvement that will help further strengthen the ISM Program and the pursuit of safety excellence. Demonstrated leadership and commitment, continued surveillance, and dedicated resources have been instrumental in maturing a sound ISMS program. Based upon interviews with personnel, reviews of assurance activities, and analysis of ISMS process implementation, this effectiveness review concludes that ISM is institutionalized and is “Effective”.« less

Design for Reliability and Safety Approach for the NASA New Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal, M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new crew launch vehicle called ARES I. The ARES I is being developed by NASA Marshall Space Flight Center (MSFC) in support of the Constellation program. The ARES I consists of three major Elements: A solid First Stage (FS), an Upper Stage (US), and liquid Upper Stage Engine (USE). Stacked on top of the ARES I is the Crew exploration vehicle (CEV). The CEV consists of a Launch Abort System (LAS), Crew Module (CM), Service Module (SM), and a Spacecraft Adapter (SA). The CEV development is being led by NASA Johnson Space Center (JSC). Designing for high reliability and safety require a good integrated working environment and a sound technical design approach. The "Design for Reliability and Safety" approach addressed in this paper discusses both the environment and the technical process put in place to support the ARES I design. To address the integrated working environment, the ARES I project office has established a risk based design group called "Operability Design and Analysis" (OD&A) group. This group is an integrated group intended to bring together the engineering, design, and safety organizations together to optimize the system design for safety, reliability, and cost. On the technical side, the ARES I project has, through the OD&A environment, implemented a probabilistic approach to analyze and evaluate design uncertainties and understand their impact on safety, reliability, and cost. This paper focuses on the use of the various probabilistic approaches that have been pursued by the ARES I project. Specifically, the paper discusses an integrated functional probabilistic analysis approach that addresses upffont some key areas to support the ARES I Design Analysis Cycle (DAC) pre Preliminary Design (PD) Phase. This functional approach is a probabilistic physics based approach that combines failure probabilities with system dynamics and engineering failure impact models to identify key system risk drivers and potential system design requirements. The paper also discusses other probabilistic risk assessment approaches planned by the ARES I project to support the PD phase and beyond.

Aviation Data Integration System

NASA Technical Reports Server (NTRS)

Kulkarni, Deepak; Wang, Yao; Windrem, May; Patel, Hemil; Keller, Richard

2003-01-01

During the analysis of flight data and safety reports done in ASAP and FOQA programs, airline personnel are not able to access relevant aviation data for a variety of reasons. We have developed the Aviation Data Integration System (ADIS), a software system that provides integrated heterogeneous data to support safety analysis. Types of data available in ADIS include weather, D-ATIS, RVR, radar data, and Jeppesen charts, and flight data. We developed three versions of ADIS to support airlines. The first version has been developed to support ASAP teams. A second version supports FOQA teams, and it integrates aviation data with flight data while keeping identification information inaccessible. Finally, we developed a prototype that demonstrates the integration of aviation data into flight data analysis programs. The initial feedback from airlines is that ADIS is very useful in FOQA and ASAP analysis.

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the System-Wide Safety and Assurance Technologies Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2015-01-01

The Aviation Safety Program (AvSP) System-Wide Safety and Assurance Technologies (SSAT) Project asked the AvSP Systems and Portfolio Analysis Team to identify SSAT-related trends. SSAT had four technical challenges: advance safety assurance to enable deployment of NextGen systems; automated discovery of precursors to aviation safety incidents; increasing safety of human-automation interaction by incorporating human performance, and prognostic algorithm design for safety assurance. This report reviews incident data from the NASA Aviation Safety Reporting System (ASRS) for system-component-failure- or-malfunction- (SCFM-) related and human-factor-related incidents for commercial or cargo air carriers (Part 121), commuter airlines (Part 135), and general aviation (Part 91). The data was analyzed by Federal Aviation Regulations (FAR) part, phase of flight, SCFM category, human factor category, and a variety of anomalies and results. There were 38 894 SCFM-related incidents and 83 478 human-factorrelated incidents analyzed between January 1993 and April 2011.

Factors associated with self-reported inattentive driving at highway-rail grade crossings.

PubMed

Zhao, Shanshan; Khattak, Aemal J

2017-12-01

This research identified factors associated with inattentive driving at Highway-Rail Grade Crossings (HRGCs) by investigating drivers' self-reported inattentive driving experiences and factors pertaining to their socioeconomic, personality, attitudinal, and other characteristics. A random selection of 2500 households in Nebraska received a survey questionnaire designed for licensed motor vehicle drivers; respondents returned 980 questionnaires. Factor analysis identified latent variables evaluating drivers' patience and inclination to wait for trains, attitudes toward new technology, law enforcement or education regarding HRGC safety, and the propensity to commit serious traffic violations at HRGCs. The investigation utilized a structural equation model for analysis. This model indicated that drivers with a higher risk of inattentive driving at HRGCs were: female, younger in age, from households with higher incomes, with shorter tenure (in years) in their current city of residence, more frequently used HRGCs, received less information on safety at HRGCs, had less patience to wait for trains to pass and had less interest in safety improvement technology, law enforcement or safety education at HRGCs. These research findings provide useful information for future research and to policy makers for improving public safety. Additionally, the results are useful for safety educational program providers for targeted program delivery to drivers that are more vulnerable to distracted driving at HRGCs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Research notes : evaluation of the oregon medically at-risk driver program.

DOT National Transportation Integrated Search

2009-05-01

Dr. James Strathman, a Portland State University researcher, recently completed an assessment of the safety risk of persons whose licenses were suspended under the Oregon Medically At-Risk Driver program. The results of the analysis suggested modific...

[The role of safety climate and the relationship with job satisfaction: an exploratory study across three different occupational contexts.

PubMed

Emanuel, Federica; Colombo, Lara; Cortese, Claudio G; Ghislieri, Chiara

2017-12-01

This study examined the role of the "safety climate", or the organization's attention to health and safety of workers, and of job demand and resources in relation with job satisfaction. Wellbeing at work is a topic of growing interest, in line with the legislation and the programs on health and safety of workers and management and the evaluation of psychosocial risks. Several studies show that organizational actions concerning health and safety can be an indicator of the attention to employees' wellbeing, even if studies about the relationship between safety climate and some psychosocial outcomes are scant. The study analysed the relationship between job demand, job resources, safety climate and job satisfaction in three different occupational contexts (public authority, N = 224; social care organization, N = 115; pharmaceutical company, N = 127); workers were divided into groups based on the risk level appeared in the objective assessment of work-related stress, in order to identify differences. The self-report questionnaire gathered information about: job satisfaction, work efforts, supervisors' support, colleagues support, safety climate (α between .72 and .93). Data analysis provided: Cronbach α, analysis of variance, correlations, stepwise multiple regressions. The results showed that job satisfaction (R2 between .23 and .88) had a negative relationship with efforts and a positive relationship with job resources and safety climate. It emerges the importance of safety climate: to support and promote wellbeing at work, organizations could endorse training and information programs on health and safety for all workers and management, not only for professional groups with high-risk level. Future studies could explore the relation between safety climate and other outcomes, such as emotional exhaustion or objective indicators of organizational health (e.g. absenteeism, accidents, etc.). Copyright© by Aracne Editrice, Roma, Italy.

Achieving the Proper Balance Between Crew and Public Safety

NASA Technical Reports Server (NTRS)

Gowan, John; Silvestri, Ray; Stahl, Ben; Rosati, Paul; Wilde, Paul

2011-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Manned vehicle perspectives from the Federal Aviation Administration (FAA) and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Achieving the Proper Balance between Crew & Public Safety

NASA Astrophysics Data System (ADS)

Wilde, P.; Gowan, J.; Silvestri, R.; Stahl, B.; Rosati, P.

2012-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Crewed vehicle perspectives from the Federal Aviation Administration and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

2008 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2008-06-13

This report summarizes comments from the Peer Review Panel at the 2008 DOE Hydrogen Program Annual Merit Review, held on June 9-13, 2008, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; technology validation; safety, codes, and standards; education; systems analysis; and manufacturing.

Program Multi - A Multi-purpose Program for Computing and Graphing Roots and Values for Any Real Function -- Users/Programmers Manual

DOT National Transportation Integrated Search

1976-05-01

As part of its activity under the Rail Equipment Safety Project, computer programs for track/train dynamics analysis are being developed and modified. As part of this effort, derailment behavior of trains negotiating curves under buff or draft has be...

2015 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2015 Annual Progress Report summarizes fiscal year 2015 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; and market transformation.

Condition Survey and Paver Implementation Davis-Monthan Air Force Base, Arizona

DTIC Science & Technology

1991-02-01

questiotns that the program asks, and then analysis results are produced based on those responses. The analysis reports can only be generated using the...09/01/89 PCI- 36 RATING- POOR CONDITION- RIDING- SAFETY - DRAINAGE- SHOULDERS- OVERALL- TOTAL NUMBER OF SAMPLES IN SECTION- 4 NUMBER OF SAMPLES...CONDITION- RIDING- SAFETY - DRAINAGE- SHOULDERS- OVERALL- TOTAL NUMBER OF SAMPLES IN SECTION- 17 NUMBER OF SAMPLES SURVEYED- 5 RECOMMENDED SAMPLES TO BE

School-based prevention program associated with increased short- and long-term retention of safety knowledge.

PubMed

Klas, Karla S; Vlahos, Peter G; McCully, Michael J; Piche, David R; Wang, Stewart C

2015-01-01

Validation of program effectiveness is essential in justifying school-based injury prevention education. Although Risk Watch (RW) targets burn, fire, and life safety, its effectiveness has not been previously evaluated in the medical literature. Between 2007 and 2012, a trained fire service public educator (FSPE) taught RW to all second grade students in one public school district. The curriculum was delivered in 30-minute segments for 9 consecutive weeks via presentations, a safety smoke house trailer, a model-sized hazard house, a student workbook, and parent letters. A written pre-test (PT) was given before RW started, a post-test (PT#1) was given immediately after RW, and a second post-test (PT#2) was administered to the same students the following school year (ranging from 12 to 13 months after PT). Students who did not complete the PT or at least one post-test were excluded. Comparisons were made by paired t-test, analysis of variance, and regression analysis. After 183 (8.7%) were excluded for missing tests, 1,926 remaining students scored significantly higher (P = .0001) on PT#1 (mean 14.8) and PT#2 (mean 14.7) than the PT (mean 12.1). There was 1 FSPE and 36 school teachers with class size ranging from 10 to 27 (mean 21.4). Class size was not predictive of test score improvement (R = 0%), while analysis of variance showed that individual teachers trended toward some influence. This 6-year prospective study demonstrated that the RW program delivered by an FSPE effectively increased short-term knowledge and long-term retention of fire/life safety in early elementary students. Collaborative partnerships are critical to preserving community injury prevention education programs.

An analysis of students' perceptions to Just Culture in the aviation industry: A study of a Midwest aviation training program (case study)

NASA Astrophysics Data System (ADS)

Mohammed, Lazo Akram

The research will focus on the discussion of the ways in which the top-down nature of Safety Management Systems (SMS) can be used to create `Just Culture' within the aviation industry. Specific focus will be placed on an aviation program conducted by an accredited university, with the institution in focus being the midwest aviation training program. To this end, a variety of different aspects of safety culture in aviation and aviation management will be considered. The focus on the implementation strategies vital for the existence of a `Just Culture' within the aviation industry in general, and particularly within the aforementioned institution's aerospace program. Some ideas and perspectives will be subsequently suggested and designed for implementation, within the institution's program. The aspect of enhancing the overall safety output gained, from the institution, as per standards set within the greater American Aviation industry will be examined. Overall, the paper will seek to showcase the vital importance of implementing the SMS standardization model in the institution's Aerospace program, while providing some areas of concern. Such concerns will be based on a number of issues, which are pertinent to the overall enhancement of the institution's observance of aviation safety. This will be both in general application of an SMS, as well as personalized/ specific applications in areas in need of improvement. Overall, through the paper, the author hopes to provide a better understanding of the institution's placement, with regard to not only aviation safety, but also the implementation of an effective `Just Culture' within the program.

Strengths, weaknesses, opportunities, and threats analysis of integrating the World Health Organization patient safety curriculum into undergraduate medical education in Pakistan: a qualitative case study

PubMed Central

2017-01-01

Purpose The purpose of this study was to conduct a strengths, weaknesses, opportunities, and threats (SWOT) analysis of integrating the World Health Organization (WHO) patient safety curriculum into undergraduate medical education in Pakistan. Methods A qualitative interpretive case study was conducted at Riphah International University, Islamabad, from October 2016 to June 2017. The study included 9 faculty members and 1 expert on patient safety. The interviews were audiotaped, and a thematic analysis of the transcripts was performed using NVivo software. Results Four themes were derived based on the need analysis model. The sub-themes derived from the collected data were arranged under the themes of strengths, weaknesses, opportunities, and threats, in accordance with the principles of SWOT analysis. The strengths identified were the need for a formal patient safety curriculum and its early integration into the undergraduate program. The weaknesses were faculty awareness and participation in development programs. The opportunities were an ongoing effort to develop an appropriate curriculum, to improve the current culture of healthcare, and to use the WHO curricular resource guide. The threats were attitudes towards patient safety in Pakistani culture, resistance to implementation from different levels, and the role of regulatory authorities. Conclusion The theme of patient safety needs to be incorporated early into the formal medical education curriculum, with the main goals of striving to do no harm and seeing mistakes as opportunities to learn. Faculty development activities need to be organized, and faculty members should to be encouraged to participate in them. The lack of a patient safety culture was identified as the primary reason for resistance to this initiative at many levels. The WHO curriculum, amended according to local institutional culture, can be implemented appropriately with support from the corresponding regulatory bodies. PMID:29284217

A Historical Analysis of Crane Mishaps at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

Procedure for Failure Mode, Effects, and Criticality Analysis (FMECA)

NASA Technical Reports Server (NTRS)

1966-01-01

This document provides guidelines for the accomplishment of Failure Mode, Effects, and Criticality Analysis (FMECA) on the Apollo program. It is a procedure for analysis of hardware items to determine those items contributing most to system unreliability and crew safety problems.

Evaluation of the Gateway Monument Demonstration Program: Safety, Economic and Social Impact Analysis

DOT National Transportation Integrated Search

2009-09-01

The Gateway Monument Demonstration Program (GMDP) facilitated the construction of freestanding structures or signage along roadways to communicate the name of a city, county or township to motorists. The GMDP spanned a four-year period, commencing on...

Policy analysis of the budget used in training program for reducing lower back pain among heavy equipment operators in the construction industry: System dynamics approach

NASA Astrophysics Data System (ADS)

Vitharana, V. H. P.; Chinda, T.

2018-04-01

Lower back pain (LBP), prevalence is high among the heavy equipment operators leading to high compensation cost in the construction industry. It is found that proper training program assists in reducing chances of having LBP. This study, therefore aims to examine different safety related budget available to support LBP related training program for different age group workers, utilizing system dynamics modeling approach. The simulation results show that at least 2.5% of the total budget must be allocated in the safety and health budget to reduce the chances of having LBP cases.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2004-01-01

This is a listing of recent unclassified RTO technical publications processed by the NASA Center for AeroSpace Information from July 1, 2004 through September 30, 2004 available on the NASA Aeronautics and Space Database. Topics covered include: military training; personal active noise reduction; electric combat vehicles.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2000-01-01

This is a quarterly listing of unclassified AGARD and RTO technical publications NASA received and announced in the NASA STI Database. Contents include 1) Sensor Data Fusion and Integration of the Human Element; 2) Planar Optical Measurement Methods for Gas Turbine Components; 3) RTO Highlights 1998, December 1998.

Preharvest food safety.

PubMed

Childers, A B; Walsh, B

1996-07-23

Preharvest food safety is essential for the protection of our food supply. The production and transport of livestock and poultry play an integral part in the safety of these food products. The goals of this safety assurance include freedom from pathogenic microorganisms, disease, and parasites, and from potentially harmful residues and physical hazards. Its functions should be based on hazard analysis and critical control points from producer to slaughter plant with emphasis on prevention of identifiable hazards rather than on removal of contaminated products. The production goal is to minimize infection and insure freedom from potentially harmful residues and physical hazards. The marketing goal is control of exposure to pathogens and stress. Both groups should have functional hazard analysis and critical control points management programs which include personnel training and certification of producers. These programs must cover production procedures, chemical usage, feeding, treatment practices, drug usage, assembly and transportation, and animal identification. Plans must use risk assessment principles, and the procedures must be defined. Other elements would include preslaughter certification, environmental protection, control of chemical hazards, live-animal drug-testing procedures, and identification of physical hazards.

Evaluation of radiological dispersion/consequence codes supporting DOE nuclear facility SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kula, K.R.; Paik, I.K.; Chung, D.Y.

1996-12-31

Since the early 1990s, the authorization basis documentation of many U.S. Department of Energy (DOE) nuclear facilities has been upgraded to comply with DOE orders and standards. In this process, many safety analyses have been revised. Unfortunately, there has been nonuniform application of software, and the most appropriate computer and engineering methodologies often are not applied. A DOE Accident Phenomenology and Consequence (APAC) Methodology Evaluation Program was originated at the request of DOE Defense Programs to evaluate the safety analysis methodologies used in nuclear facility authorization basis documentation and to define future cost-effective support and development initiatives. Six areas, includingmore » source term development (fire, spills, and explosion analysis), in-facility transport, and dispersion/ consequence analysis (chemical and radiological) are contained in the APAC program. The evaluation process, codes considered, key results, and recommendations for future model and software development of the Radiological Dispersion/Consequence Working Group are summarized in this paper.« less

Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

Risk management in international manned space program operations.

PubMed

Seastrom, J W; Peercy, R L; Johnson, G W; Sotnikov, B J; Brukhanov, N

2004-02-01

New, innovative joint safety policies and requirements were developed in support of the Shuttle/Mir program, which is the first phase of the International Space Station program. This work has resulted in a joint multinational analysis culminating in joint certification for mission readiness. For these planning and development efforts, each nation's risk programs and individual safety practices had to be integrated into a comprehensive and compatible system that reflects the joint nature of the endeavor. This paper highlights the major incremental steps involved in planning and program integration during development of the Shuttle/Mir program. It traces the transition from early development to operational status and highlights the valuable lessons learned that apply to the International Space Station program (Phase 2). Also examined are external and extraneous factors that affected mission operations and the corresponding solutions to ensure safe and effective Shuttle/Mir missions. c2003 Published by Elsevier Ltd.

Visit from JAXA to NASA MSFC: The Engines Element & Ideas for Collaboration

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

System Design, Development, and Fabrication: Design, develop, and fabricate or procure MB-60 component hardware compliant with the imposed technical requirements and in sufficient quantities to fulfill the overall MB-60 development effort. System Development, Assembly, and Test: Manage the scope of the development, assembly, and test-related activities for MB-60 development. This scope includes engine-level development planning, engine assembly and disassembly, test planning, engine testing, inspection, anomaly resolution, and development of necessary ground support equipment and special test equipment. System Integration: Provide coordinated integration in the realms of engineering, safety, quality, and manufacturing disciplines across the scope of the MB-60 design and associated products development Safety and Mission Assurance, structural design, fracture control, materials and processes, thermal analysis. Systems Engineering and Analysis: Manage and perform Systems Engineering and Analysis to provide rigor and structure to the overall design and development effort for the MB-60. Milestone reviews, requirements management, system analysis, program management support Program Management: Manage, plan, and coordinate the activities across all portions of the MB-60 work scope by providing direction for program administration, business management, and supplier management.

Evolution of Safety Analysis to Support New Exploration Missions

NASA Technical Reports Server (NTRS)

Thrasher, Chard W.

2008-01-01

NASA is currently developing the Ares I launch vehicle as a key component of the Constellation program which will provide safe and reliable transportation to the International Space Station, back to the moon, and later to Mars. The risks and costs of the Ares I must be significantly lowered, as compared to other manned launch vehicles, to enable the continuation of space exploration. It is essential that safety be significantly improved, and cost-effectively incorporated into the design process. This paper justifies early and effective safety analysis of complex space systems. Interactions and dependences between design, logistics, modeling, reliability, and safety engineers will be discussed to illustrate methods to lower cost, reduce design cycles and lessen the likelihood of catastrophic events.

Quantifying and Addressing the DOE Material Reactivity Requirements with Analysis and Testing of Hydrogen Storage Materials & Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, Y. F.

2012-04-30

The objective of this project is to examine safety aspects of candidate hydrogen storage materials and systems being developed in the DOE Hydrogen Program. As a result of this effort, the general DOE safety target will be given useful meaning by establishing a link between the characteristics of new storage materials and the satisfaction of safety criteria. This will be accomplished through the development and application of formal risk analysis methods, standardized materials testing, chemical reactivity characterization, novel risk mitigation approaches and subscale system demonstration. The project also will collaborate with other DOE and international activities in materials based hydrogenmore » storage safety to provide a larger, highly coordinated effort.« less

DYNALIST II : A Computer Program for Stability and Dynamic Response Analysis of Rail Vehicle Systems : Volume 4. Revised User's Manual.

DOT National Transportation Integrated Search

1976-07-01

The Federal Railroad Administration (FRA) is sponsoring research, development, and demonstration programs to provide improved safety, performance, speed, reliability, and maintainability of rail transportation systems at reduced life-cycle costs. A m...

2016 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2016 Annual Progress Report summarizes fiscal year 2016 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; market transformation; and Small Business Innovation Research projects.

College Programs in Women's Prisons: Faculty Perceptions of Teaching Higher Education behind Bars

ERIC Educational Resources Information Center

Richard, Kymberly

2017-01-01

In 2014, the RAND Safety and Justice Program published a comprehensive analysis that "found, on average, inmates who participated in correctional education programs had 43 percent lower odds of recidivating than inmates who did not and that correctional education may increase post-release employment" Davis et al., 2014, p. xvi). The RAND…

2010 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2010 DOE Hydrogen Program Annual Merit Review, held on June 7-11, 2010, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; and systems analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stayner, L.T.; Meinhardt, T.; Hardin, B.

Under the Occupational Safety and Health, and Mine Safety and Health Acts, the National Institute for Occupational Safety and Health (NIOSH) is charged with development of recommended occupational safety and health standards, and with conducting research to support the development of these standards. Thus, NIOSH has been actively involved in the analysis of risk associated with occupational exposures, and in the development of research information that is critical for the risk assessment process. NIOSH research programs and other information resources relevant to the risk assessment process are described in this paper. Future needs for information resources are also discussed.

Creating an Oversight Infrastructure for Electronic Health Record-Related Patient Safety Hazards

PubMed Central

Singh, Hardeep; Classen, David C.; Sittig, Dean F.

2013-01-01

Electronic health records (EHRs) have potential quality and safety benefits. However, reports of EHR-related safety hazards are now emerging. The Office of the National Coordinator (ONC) for Health Information Technology (HIT) recently sponsored an Institute of Medicine committee to evaluate how HIT use affects patient safety. In this paper, we propose the creation of a national EHR oversight program to provide dedicated surveillance of EHR-related safety hazards and to promote learning from identified errors, close calls, and adverse events. The program calls for data gathering, investigation/analysis and regulatory components. The first two functions will depend on institution-level EHR safety committees that will investigate all known EHR-related adverse events and near-misses and report them nationally using standardized methods. These committees should also perform routine safety self-assessments to proactively identify new risks. Nationally, we propose the long-term creation of a centralized, non-partisan board with an appropriate legal and regulatory infrastructure to ensure the safety of EHRs. We discuss the rationale of the proposed oversight program and its potential organizational components and functions. These include mechanisms for robust data collection and analyses of all safety concerns using multiple methods that extend beyond reporting; multidisciplinary investigation of selected high-risk safety events; and enhanced coordination with other national agencies in order to facilitate broad dissemination of hazards information. Implementation of this proposed infrastructure can facilitate identification of EHR-related adverse events and errors and potentially create a safer and more effective EHR-based health care delivery system. PMID:22080284

South Carolina Industrial Arts Safety Guide. Student Section.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

This student section of a South Carolina industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on developing a student safety program. Set forth…

Vocational Education Safety Instruction Manual.

ERIC Educational Resources Information Center

Cropley, Russell, Ed.; Doherty, Susan Sloan, Ed.

This manual describes four program areas in vocational education safety instruction: (1) introduction to a safety program; (2) resources to ensure laboratory safety; (3) safety program implementation; and (4) safety rules and safety tests. The safety rules and tests included in section four are for the most common tools and machines used in…

[Evaluating training programs on occupational health and safety: questionnaire development].

PubMed

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Developing a safe on-orbit cryogenic depot

NASA Technical Reports Server (NTRS)

Bahr, Nicholas J.

1992-01-01

New U.S. space initiatives will require technology to realize planned programs such as piloted lunar and Mars missions. Key to the optimal execution of such missions are high performance orbit transfer vehicles and propellant storage facilities. Large amounts of liquid hydrogen and oxygen demand a uniquely designed on-orbit cryogenic propellant depot. Because of the inherent dangers in propellant storage and handling, a comprehensive system safety program must be established. This paper shows how the myriad and complex hazards demonstrate the need for an integrated safety effort to be applied from program conception through operational use. Even though the cryogenic depot is still in the conceptual stage, many of the hazards have been identified, including fatigue due to heavy thermal loading from environmental and operating temperature extremes, micrometeoroid and/or depot ancillary equipment impact (this is an important problem due to the large surface area needed to house the large quantities of propellant), docking and maintenance hazards, and hazards associated with extended extravehicular activity. Various safety analysis techniques were presented for each program phase. Specific system safety implementation steps were also listed. Enhanced risk assessment was demonstrated through the incorporation of these methods.

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

NASA Technical Reports Server (NTRS)

Min, James B.

2005-01-01

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

Investigation of criticality safety control infraction data at a nuclear facility

DOE PAGES

Cournoyer, Michael E.; Merhege, James F.; Costa, David A.; ...

2014-10-27

Chemical and metallurgical operations involving plutonium and other nuclear materials account for most activities performed at the LANL's Plutonium Facility (PF-4). The presence of large quantities of fissile materials in numerous forms at PF-4 makes it necessary to maintain an active criticality safety program. The LANL Nuclear Criticality Safety (NCS) Program provides guidance to enable efficient operations while ensuring prevention of criticality accidents in the handling, storing, processing and transportation of fissionable material at PF-4. In order to achieve and sustain lower criticality safety control infraction (CSCI) rates, PF-4 operations are continuously improved, through the use of Lean Manufacturing andmore » Six Sigma (LSS) business practices. Employing LSS, statistically significant variations (trends) can be identified in PF-4 CSCI reports. In this study, trends have been identified in the NCS Program using the NCS Database. An output metric has been developed that measures ADPSM Management progress toward meeting its NCS objectives and goals. Using a Pareto Chart, the primary CSCI attributes have been determined in order of those requiring the most management support. Data generated from analysis of CSCI data help identify and reduce number of corresponding attributes. In-field monitoring of CSCI's contribute to an organization's scientific and technological excellence by providing information that can be used to improve criticality safety operation safety. This increases technical knowledge and augments operational safety.« less

A Generic Software Safety Document Generator

NASA Technical Reports Server (NTRS)

Denney, Ewen; Venkatesan, Ram Prasad

2004-01-01

Formal certification is based on the idea that a mathematical proof of some property of a piece of software can be regarded as a certificate of correctness which, in principle, can be subjected to external scrutiny. In practice, however, proofs themselves are unlikely to be of much interest to engineers. Nevertheless, it is possible to use the information obtained from a mathematical analysis of software to produce a detailed textual justification of correctness. In this paper, we describe an approach to generating textual explanations from automatically generated proofs of program safety, where the proofs are of compliance with an explicit safety policy that can be varied. Key to this is tracing proof obligations back to the program, and we describe a tool which implements this to certify code auto-generated by AutoBayes and AutoFilter, program synthesis systems under development at the NASA Ames Research Center. Our approach is a step towards combining formal certification with traditional certification methods.

An overview of microbial food safety programs in beef, pork, and poultry from farm to processing in Canada.

PubMed

Rajić, Andrijana; Waddell, Lisa A; Sargeant, Jan M; Read, Susan; Farber, Jeff; Firth, Martin J; Chambers, Albert

2007-05-01

Canada's vision for the agri-food industry in the 21st century is the establishment of a national food safety system employing hazard analysis and critical control point (HACCP) principles and microbiological verification tools, with traceability throughout the gate-to-plate continuum. Voluntary on-farm food safety (OFFS) programs, based in part on HACCP principles, provide producers with guidelines for good production practices focused on general hygiene and biosecurity. OFFS programs in beef cattle, swine, and poultry are currently being evaluated through a national recognition program of the Canadian Food Inspection Agency. Mandatory HACCP programs in federal meat facilities include microbial testing for generic Escherichia coli to verify effectiveness of the processor's dressing procedure, specific testing of ground meat for E. coli O157:H7, with zero tolerance for this organism in the tested lot, and Salmonella testing of raw products. Health Canada's policy on Listeria monocytogenes divides ready-to-eat products into three risk categories, with products previously implicated as the source of an outbreak receiving the highest priority for inspection and compliance. A national mandatory identification program to track livestock from the herd of origin to carcass inspection has been established. Can-Trace, a data standard for all food commodities, has been designed to facilitate tracking foods from the point of origin to the consumer. Although much work has already been done, a coherent national food safety strategy and concerted efforts by all stakeholders are needed to realize this vision. Cooperation of many government agencies with shared responsibility for food safety and public health will be essential.

Biomedical systems analysis program

NASA Technical Reports Server (NTRS)

1979-01-01

Biomedical monitoring programs which were developed to provide a system analysis context for a unified hypothesis for adaptation to space flight are presented and discussed. A real-time system of data analysis and decision making to assure the greatest possible crew safety and mission success is described. Information about man's abilities, limitations, and characteristic reactions to weightless space flight was analyzed and simulation models were developed. The predictive capabilities of simulation models for fluid-electrolyte regulation, erythropoiesis regulation, and calcium regulation are discussed.

Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, R.K.; Julka, A.; Modi, G.

1994-08-01

MDR relays manufactured by Potter and Brumfield (P and B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P and B has made design changes to correct these problems in relays manufactured after May 1990. However, P and B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture themore » relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to qualify P and B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.« less

Safety performance of drivers with medical exemptions : how safe are drivers in a medical exemption program compared to those who are not? : analysis brief.

DOT National Transportation Integrated Search

2016-11-01

For commercial motor vehicle (CMV) drivers, safety performance depends not only on the condition of the vehicle being driven but also on the drivers ability to operate it. Because factors such as stopping time and distance, blind spots, and limite...

Bachelors of Science in Nursing Students and a Qualitative Analysis of Their Medication Administration Experiences

ERIC Educational Resources Information Center

Betts, Kelly J.

2016-01-01

Lack of medication knowledge and skills is detrimental to the safety and welfare of patients. Lack of pharmacology knowledge and skills is detrimental to the safety and welfare of patients. In a southern baccalaureate nursing program, students demonstrated deficiencies in their medication knowledge and skill proficiency. This qualitative study…

The Effect of Automobile Safety on Vehicle Type Choice: An Empirical Study.

ERIC Educational Resources Information Center

McCarthy, Patrick S.

An analysis was made of the extent to which the safety characteristics of new vehicles affect consumer purchase decisions. Using an extensive data set that combines vehicle data collected by the Automobile Club of Southern California Target Car Program with the responses from a national household survey of new car buyers, a statistical model of…

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

Program level evaluation of ASAP diagnosis, referral and rehabilitation efforts. Volume 3, Analysis of ASAP rehabilitation countermeasures effectiveness

DOT National Transportation Integrated Search

1976-09-01

The present report describes the client flow through rehabilitation systems of the 35 NHTSA funded Alcohol Safety Action Projects (ASAPs) during the 1972-1974 period of project operations, summarizes project initiated analyses of treatment program ef...

Safety and reliability analysis in a polyvinyl chloride batch process using dynamic simulator-case study: Loss of containment incident.

PubMed

Rizal, Datu; Tani, Shinichi; Nishiyama, Kimitoshi; Suzuki, Kazuhiko

2006-10-11

In this paper, a novel methodology in batch plant safety and reliability analysis is proposed using a dynamic simulator. A batch process involving several safety objects (e.g. sensors, controller, valves, etc.) is activated during the operational stage. The performance of the safety objects is evaluated by the dynamic simulation and a fault propagation model is generated. By using the fault propagation model, an improved fault tree analysis (FTA) method using switching signal mode (SSM) is developed for estimating the probability of failures. The timely dependent failures can be considered as unavailability of safety objects that can cause the accidents in a plant. Finally, the rank of safety object is formulated as performance index (PI) and can be estimated using the importance measures. PI shows the prioritization of safety objects that should be investigated for safety improvement program in the plants. The output of this method can be used for optimal policy in safety object improvement and maintenance. The dynamic simulator was constructed using Visual Modeler (VM, the plant simulator, developed by Omega Simulation Corp., Japan). A case study is focused on the loss of containment (LOC) incident at polyvinyl chloride (PVC) batch process which is consumed the hazardous material, vinyl chloride monomer (VCM).

Improving eye safety in citrus harvest crews through the acceptance of personal protective equipment, community-based participatory research, social marketing, and community health workers.

PubMed

Tovar-Aguilar, J Antonio; Monaghan, Paul F; Bryant, Carol A; Esposito, Andrew; Wade, Mark; Ruiz, Omar; McDermott, Robert J

2014-01-01

For the last 10 years, the Partnership for Citrus Workers Health (PCWH) has been an evidence-based intervention program that promotes the adoption of protective eye safety equipment among Spanish-speaking farmworkers of Florida. At the root of this program is the systematic use of community-based preventive marketing (CBPM) and the training of community health workers (CHWs) among citrus harvester using popular education. CBPM is a model that combines the organizational system of community-based participatory research (CBPR) and the strategies of social marketing. This particular program relied on formative research data using a mixed-methods approach and a multilevel stakeholder analysis that allowed for rapid dissemination, effective increase of personal protective equipment (PPE) usage, and a subsequent impact on adoptive workers and companies. Focus groups, face-to-face interviews, surveys, participant observation, Greco-Latin square, and quasi-experimental tests were implemented. A 20-hour popular education training produced CHWs that translated results of the formative research to potential adopters and also provided first aid skills for eye injuries. Reduction of injuries is not limited to the use of safety glasses, but also to the adoption of timely intervention and regular eye hygiene. Limitations include adoption in only large companies, rapid decline of eye safety glasses without consistent intervention, technological limitations of glasses, and thorough cost-benefit analysis.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

Medicare Payment Penalties and Safety Net Hospital Profitability: Minimal Impact on These Vulnerable Hospitals.

PubMed

Bazzoli, Gloria J; Thompson, Michael P; Waters, Teresa M

2018-02-08

To examine relationships between penalties assessed by Medicare's Hospital Readmission Reduction Program and Value-Based Purchasing Program and hospital financial condition. Centers for Medicare and Medicaid Services, American Hospital Association, and Area Health Resource File data for 4,824 hospital-year observations. Bivariate and multivariate analysis of pooled cross-sectional data. Safety net hospitals have significantly higher HRRP/VBP penalties, but, unlike nonsafety net hospitals, increases in their penalty rate did not significantly affect their total margins. Safety net hospitals appear to rely on nonpatient care revenues to offset higher penalties for the years studied. While reassuring, these funding streams are volatile and may not be able to compensate for cumulative losses over time. © Health Research and Educational Trust.

Industrial Arts Safety Guide. Thai. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Thai. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Japanese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practice in both English and Japanese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Cambodian. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices in both English and Cambodian. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Korean. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Korean. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Ilokano. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Ilokano. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Chinese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Chinese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Sun Safety at Work Canada: a multiple case-study protocol to develop sun safety and heat protection programs and policies for outdoor workers.

PubMed

Kramer, Desre M; Tenkate, Thomas; Strahlendorf, Peter; Kushner, Rivka; Gardner, Audrey; Holness, D Linn

2015-07-10

CAREX Canada has identified solar ultraviolet radiation (UV) as the second most prominent carcinogenic exposure in Canada, and over 75 % of Canadian outdoor workers fall within the highest exposure category. Heat stress also presents an important public health issue, particularly for outdoor workers. The most serious form of heat stress is heat stroke, which can cause irreversible damage to the heart, lungs, kidneys, and liver. Although the need for sun and heat protection has been identified, there is no Canada-wide heat and sun safety program for outdoor workers. Further, no prevention programs have addressed both skin cancer prevention and heat stress in an integrated approach. The aim of this partnered study is to evaluate whether a multi-implementation, multi-evaluation approach can help develop sustainable workplace-specific programs, policies, and procedures to increase the use of UV safety and heat protection. This 2-year study is a theory-driven, multi-site, non-randomized study design with a cross-case analysis of 13 workplaces across four provinces in Canada. The first phase of the study includes the development of workplace-specific programs with the support of the intensive engagement of knowledge brokers. There will be a three-points-in-time evaluation with process and impact components involving the occupational health and safety (OHS) director, management, and workers with the goal of measuring changes in workplace policies, procedures, and practices. It will use mixed methods involving semi-structured key informant interviews, focus groups, surveys, site observations, and UV dosimetry assessment. Using the findings from phase I, in phase 2, a web-based, interactive, intervention planning tool for workplaces will be developed, as will the intensive engagement of intermediaries such as industry decision-makers to link to policymakers about the importance of heat and sun safety for outdoor workers. Solar UV and heat are both health and safety hazards. Using an occupational health and safety risk assessment and control framework, Sun Safety at Work Canada will support workplaces to assess their exposure risks, implement control strategies that build on their existing programs, and embed the controls into their existing occupational health and safety system.

Aluminum Data Measurements and Evaluation for Criticality Safety Applications

NASA Astrophysics Data System (ADS)

Leal, L. C.; Guber, K. H.; Spencer, R. R.; Derrien, H.; Wright, R. Q.

2002-12-01

The Defense Nuclear Facility Safety Board (DNFSB) Recommendation 93-2 motivated the US Department of Energy (DOE) to develop a comprehensive criticality safety program to maintain and to predict the criticality of systems throughout the DOE complex. To implement the response to the DNFSB Recommendation 93-2, a Nuclear Criticality Safety Program (NCSP) was created including the following tasks: Critical Experiments, Criticality Benchmarks, Training, Analytical Methods, and Nuclear Data. The Nuclear Data portion of the NCSP consists of a variety of differential measurements performed at the Oak Ridge Electron Linear Accelerator (ORELA) at the Oak Ridge National Laboratory (ORNL), data analysis and evaluation using the generalized least-squares fitting code SAMMY in the resolved, unresolved, and high energy ranges, and the development and benchmark testing of complete evaluations for a nuclide for inclusion into the Evaluated Nuclear Data File (ENDF/B). This paper outlines the work performed at ORNL to measure, evaluate, and test the nuclear data for aluminum for applications in criticality safety problems.

Preventing Child Sexual Abuse: Body Safety Training for Young Children in Turkey.

PubMed

Citak Tunc, Gulseren; Gorak, Gulay; Ozyazicioglu, Nurcan; Ak, Bedriye; Isil, Ozlem; Vural, Pinar

2018-01-01

The "Body Safety Training Program" is an education program aimed at ensuring children are informed about their body and acquire self-protection skills. In this study, a total of 83 preschoolers were divided into experimental and control groups; based on a power analysis, 40 children comprised the experimental group, while 43 children comprised the control group. The "Body Safety Training Programme" was translated into Turkish and content validity was determined regarding the language and cultural appropriateness. The "What If Situations Test" (WIST) was administered to both groups before and after the training. Mann-Whitney U Test, Kruskal-Wallis Variance Analysis, and the Wilcoxon Signed Ranks Test were used to compare between the groups and the Spearman correlation analysis was used to determine the strength of the relationship between the dependent and independent variable. The differences between the pretest and posttest scores for the subscales (appropriate recognition, inappropriate recognition, say, do, tell, and reporting skills), and the personal safety questionnaire (PSQ) score means for the children in the experimental group were found to be statistically significant (p < .001). The posttest-pretest difference score means of the experimental group children for WIST saying, doing, telling and reporting, total skills, and PSQ were found to be statistically significant as compared to that of the control group (p < .05). The "Body Safety Training programme" is effective in increasing the child sexual abuse prevention and self-protection skills in Turkish young children.

Station Blackout: A case study in the interaction of mechanistic and probabilistic safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli; Cristian Rabiti

2013-11-01

The ability to better characterize and quantify safety margins is important to improved decision making about nuclear power plant design, operation, and plant life extension. As research and development (R&D) in the light-water reactor (LWR) Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway R&D is to support plant decisions for risk-informed margin management with the aim tomore » improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario.« less

Impact of Safety Training and Interventions on Training-Transfer: Targeting Migrant Construction Workers.

PubMed

Hussain, Rahat; Pedro, Akeem; Lee, Do Yeop; Pham, Hai Chien; Park, Chan Sik

2018-05-01

Despite substantial efforts to improve construction safety training, the accident rate of migrant workers is still high. One of the primary factors contributing to the inefficacy of training includes information delivery gaps during training sessions (knowledge-transfer). In addition, there is insufficient evidence that these training programs alone are effective enough to enable migrant workers to transfer their skills to jobsite (training-transfer). This research attempts to identify and evaluate additional interventions to improve the transfer of acquired knowledge to workplace. For this purpose, this study presents the first known experimental effort to assess the effect of interventions on migrant work groups in a multinational construction project in Qatar. Data analysis reveals that the adoption of training programs with the inclusion of interventions significantly improves training-transfer. Construction safety experts can leverage the findings of this study to enhance training-transfer by increasing worker's safety performance and hazard identification ability.

Optimizing Web-Based Instruction: A Case Study Using Poultry Processing Unit Operations

ERIC Educational Resources Information Center

O' Bryan, Corliss A.; Crandall, Philip G.; Shores-Ellis, Katrina; Johnson, Donald M.; Ricke, Steven C.; Marcy, John

2009-01-01

Food companies and supporting industries need inexpensive, revisable training methods for large numbers of hourly employees due to continuing improvements in Hazard Analysis Critical Control Point (HACCP) programs, new processing equipment, and high employee turnover. HACCP-based food safety programs have demonstrated their value by reducing the…

77 FR 77117 - Proposed Revision 0 on Access Authorization-Operational Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...--Operational Program AGENCY: Nuclear Regulatory Commission. ACTION: Standard review plan-draft section revision... public comment on NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for... seeks comments on the new Section 13.6.4 of the Standard Review Plan (SRP) concerning implementation of...

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2013 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 13-17, 2013, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

75 FR 20038 - Railroad Safety Technology Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Railroad Safety Technology Grant Program AGENCY: Federal Railroad Administration, Department of Transportation. ACTION: Notice of Funds Availability, Railroad Safety Technology Program-Correction of Grant... Railroad Safety Technology Program, in the section, ``Requirements and Conditions for Grant Applications...

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

PCC Framework for Program-Generators

NASA Technical Reports Server (NTRS)

Kong, Soonho; Choi, Wontae; Yi, Kwangkeun

2009-01-01

In this paper, we propose a proof-carrying code framework for program-generators. The enabling technique is abstract parsing, a static string analysis technique, which is used as a component for generating and validating certificates. Our framework provides an efficient solution for certifying program-generators whose safety properties are expressed in terms of the grammar representing the generated program. The fixed-point solution of the analysis is generated and attached with the program-generator on the code producer side. The consumer receives the code with a fixed-point solution and validates that the received fixed point is indeed a fixed point of the received code. This validation can be done in a single pass.

System cost performance analysis (study 2.3). Volume 1: Executive summary. [unmanned automated payload programs and program planning

NASA Technical Reports Server (NTRS)

Campbell, B. H.

1974-01-01

A study is described which was initiated to identify and quantify the interrelationships between and within the performance, safety, cost, and schedule parameters for unmanned, automated payload programs. The result of the investigation was a systems cost/performance model which was implemented as a digital computer program and could be used to perform initial program planning, cost/performance tradeoffs, and sensitivity analyses for mission model and advanced payload studies. Program objectives and results are described briefly.

Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

ERIC Educational Resources Information Center

MacDonald, Wayne, Comp.; And Others

Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP) AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of Proposed Order Designating Safety Information as Protected from...

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document comprises Pacific Northwest National Laboratory`s report for Fiscal Year 1996 on research and development programs. The document contains 161 project summaries in 16 areas of research and development. The 16 areas of research and development reported on are: atmospheric sciences, biotechnology, chemical instrumentation and analysis, computer and information science, ecological science, electronics and sensors, health protection and dosimetry, hydrological and geologic sciences, marine sciences, materials science and engineering, molecular science, process science and engineering, risk and safety analysis, socio-technical systems analysis, statistics and applied mathematics, and thermal and energy systems. In addition, this report provides an overview ofmore » the research and development program, program management, program funding, and Fiscal Year 1997 projects.« less

The relationship between organizational leadership for safety and learning from patient safety events.

PubMed

Ginsburg, Liane R; Chuang, You-Ta; Berta, Whitney Blair; Norton, Peter G; Ng, Peggy; Tregunno, Deborah; Richardson, Julia

2010-06-01

To examine the relationship between organizational leadership for patient safety and five types of learning from patient safety events (PSEs). Forty-nine general acute care hospitals in Ontario, Canada. A nonexperimental design using cross-sectional surveys of hospital patient safety officers (PSOs) and patient care managers (PCMs). PSOs provided data on organization-level learning from (a) minor events, (b) moderate events, (c) major near misses, (d) major event analysis, and (e) major event dissemination/communication. PCMs provided data on organizational leadership (formal and informal) for patient safety. Hospitals were the unit of analysis. Seemingly unrelated regression was used to examine the influence of formal and informal leadership for safety on the five types of learning from PSEs. The interaction between leadership and hospital size was also examined. Formal organizational leadership for patient safety is an important predictor of learning from minor, moderate, and major near-miss events, and major event dissemination. This relationship is significantly stronger for small hospitals (<100 beds). We find support for the relationship between patient safety leadership and patient safety behaviors such as learning from safety events. Formal leadership support for safety is of particular importance in small organizations where the economic burden of safety programs is disproportionately large and formal leadership is closer to the front lines.

TRIGRS - A Fortran Program for Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Analysis, Version 2.0

USGS Publications Warehouse

Baum, Rex L.; Savage, William Z.; Godt, Jonathan W.

2008-01-01

The Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Model (TRIGRS) is a Fortran program designed for modeling the timing and distribution of shallow, rainfall-induced landslides. The program computes transient pore-pressure changes, and attendant changes in the factor of safety, due to rainfall infiltration. The program models rainfall infiltration, resulting from storms that have durations ranging from hours to a few days, using analytical solutions for partial differential equations that represent one-dimensional, vertical flow in isotropic, homogeneous materials for either saturated or unsaturated conditions. Use of step-function series allows the program to represent variable rainfall input, and a simple runoff routing model allows the user to divert excess water from impervious areas onto more permeable downslope areas. The TRIGRS program uses a simple infinite-slope model to compute factor of safety on a cell-by-cell basis. An approximate formula for effective stress in unsaturated materials aids computation of the factor of safety in unsaturated soils. Horizontal heterogeneity is accounted for by allowing material properties, rainfall, and other input values to vary from cell to cell. This command-line program is used in conjunction with geographic information system (GIS) software to prepare input grids and visualize model results.

An Updated Examination of Aviation Accidents Associated with Turbulence, Wind Shear and Thunderstorm

NASA Technical Reports Server (NTRS)

Evans, Joni K.

2014-01-01

One of the technical challenges within the Atmospheric Environment Safety Technologies (AEST) Project of the Aviation Safety Program was to "improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena"1. In 2012, the author performed an analysis comparing various characteristics of accidents associated with different types of atmospheric hazard environments2. This document reports an update to that analysis which was done in preparation for presenting these findings at the 2015 annual meeting of the Transportation Research Board. Specifically, an additional three years of data were available, and a time-trend analysis was added.

Statistical analysis of an inter-laboratory comparison of small-scale safety and thermal testing of RDX

DOE PAGES

Brown, Geoffrey W.; Sandstrom, Mary M.; Preston, Daniel N.; ...

2014-11-17

In this study, the Integrated Data Collection Analysis (IDCA) program has conducted a proficiency test for small-scale safety and thermal (SSST) testing of homemade explosives (HMEs). Described here are statistical analyses of the results from this test for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of the RDX Class 5 Type II standard. The material was tested as a well-characterized standard several times during the proficiency test to assess differences among participants and the range of results that may arise for well-behaved explosive materials.

Study of Occupational Safety and Health Audit on Facilities at Ungku Omar College, Universiti Kebangsaan Malaysia (UKM): A Preliminary Analysis

ERIC Educational Resources Information Center

Ariffin, Kadir; Ahmad, Shaharuddin; Aiyub, Kadaruddin; Awang, Azhan; Aziz, Azmi; Mohamad, Lukman Z.; Mamat, Samsu Adabi

2010-01-01

Occupational safety and health (OSH) in Universiti Kebangsaan Malaysia (UKM) is being considered as an important program to measure employee and student welfare and well-being. During academic session, apart from attending lectures, laboratory works, tutorial and library search, majority of students spend most of their time in residential…

School Safety and Security Best Practices Approved by the Commissioner of Education. Information Brief. Report.

ERIC Educational Resources Information Center

Florida State Legislature, Tallahassee. Office of Program Policy Analysis and Government Accountability.

The 2001 Florida Legislature passed Ch. 2001-125, Laws of Florida, Section 40, which is often referred to as the Safe Passage Act. It requires all school districts to conduct a self-assessment of their school safety and security using best practices developed by the Office of Program Policy Analysis and Government Accountability (OPPAGA). It also…

Ring the Alarm! A Memo to the Schools on Fire and Human Beings.

ERIC Educational Resources Information Center

Educational Facilities Labs., Inc., New York, NY.

An analysis is presented of the handling of the human elements in fire safety. Emphasis is given to considerations such as how fires kill children, the school's responsibility for fire safety, causes of human failure, and the necessity for organized emergency programs and drills. Also included is a check list of items concerned with protection…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyack, B.E.

The PIUS reactor utilizes simplified, inherent, passive, or other innovative means to accomplish safety functions. Accordingly, the PIUS reactor is subject to the requirements of 10CFR52.47(b)(2)(i)(A). This regulation requires that the applicant adequately demonstrate the performance of each safety feature, interdependent effects among the safety features, and a sufficient data base on the safety features of the design to assess the analytical tools used for safety analysis. Los Alamos has assessed the quality and completeness of the existing and planned data bases used by Asea Brown Boveri to validate its safety analysis codes and other relevant data bases. Only amore » limited data base of separate effect and integral tests exist at present. This data base is not adequate to fulfill the requirements of 10CFR52.47(b)(2)(i)(A). Asea Brown Boveri has stated that it plans to conduct more separate effect and integral test programs. If appropriately designed and conducted, these test programs have the potential to satisfy most of the data base requirements of 10CFR52.47(b)(2)(i)(A) and remedy most of the deficiencies of the currently existing combined data base. However, the most important physical processes in PIUS are related to reactor shutdown because the PIUS reactor does not contain rodded shutdown and control systems. For safety-related reactor shutdown, PIUS relies on negative reactivity insertions from the moderator temperature coefficient and from boron entering the core from the reactor pool. Asea Brown Boveri has neither developed a direct experimental data base for these important processes nor provided a rationale for indirect testing of these key PIUS processes. This is assessed as a significant shortcoming. In preparing the conclusions of this report, test documentation and results have been reviewed for only one integral test program, the small-scale integral tests conducted in the ATLE facility.« less

A Study of Running Safety and Ride Comfort of Floating Tracks for High-Speed Train

NASA Astrophysics Data System (ADS)

Watanabe, Tsutomu; Sogabe, Masamichi; Yamazaki, Takayuki

In order to reduce train-induced vibration, many floating tracks have been used, however, for only low-speed trains because we are not sure whether riding comfort and running safety can be maintained on floating tracks for high speed train. The authors, in this study, carried out an analysis of dynamic response and running quality of various floating tracks for high-speed train like Shinkansen. We used a simulation program, DIASTARS for the analysis. In this program, the Shinkansen vehicle is represented by a model of three dimensions consisting of a body, two trucks, and four wheelsets connected to each other with springs and dampers. The floating tracks were modeled by three-dimensional finite element method. In this study, the wheel load fluctuation and vehicle body accelerations were investigated by a dynamic interaction analysis between the vehicle and track with the train speed as parameters.

Canadian Pacific Railway mechanical services' 5-Alive safety program shows promise in reducing injuries.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program is sponsoring an Alternative Safety Measures Program to explore alternative methods for evaluating whether safety programs improve safety outcomes and the ...

Undergraduate baccalaureate nursing students' self-reported confidence in learning about patient safety in the classroom and clinical settings: an annual cross-sectional study (2010-2013).

PubMed

Lukewich, Julia; Edge, Dana S; Tranmer, Joan; Raymond, June; Miron, Jennifer; Ginsburg, Liane; VanDenKerkhof, Elizabeth

2015-05-01

Given the increasing incidence of adverse events and medication errors in healthcare settings, a greater emphasis is being placed on the integration of patient safety competencies into health professional education. Nurses play an important role in preventing and minimizing harm in the healthcare setting. Although patient safety concepts are generally incorporated within many undergraduate nursing programs, the level of students' confidence in learning about patient safety remains unclear. Self-reported patient safety competence has been operationalized as confidence in learning about various dimensions of patient safety. The present study explores nursing students' self-reported confidence in learning about patient safety during their undergraduate baccalaureate nursing program. Cross-sectional study with a nested cohort component conducted annually from 2010 to 2013. Participants were recruited from one Canadian university with a four-year baccalaureate of nursing science program. All students enrolled in the program were eligible to participate. The Health Professional Education in Patient Safety Survey was administered annually. The Health Professional Education in Patient Safety Survey captures how the six dimensions of the Canadian Patient Safety Institute Safety Competencies Framework and broader patient safety issues are addressed in health professional education, as well as respondents' self-reported comfort in speaking up about patient safety issues. In general, nursing students were relatively confident in what they were learning about the clinical dimensions of patient safety, but they were less confident about the sociocultural aspects of patient safety. Confidence in what they were learning in the clinical setting about working in teams, managing adverse events and responding to adverse events declined in upper years. The majority of students did not feel comfortable speaking up about patient safety issues. The nested cohort analysis confirmed these findings. In particular, confidence in acquiring basic clinical skills, learning about adverse events, and managing safety risks improved between Year 1 and Year 2, and confidence in managing safety risks declined in upper years. These findings suggest nursing students are confident in what they are learning about clinical aspects of patient safety, however, their confidence in learning about sociocultural aspects declines as they are increasingly exposed to the clinical environment. This suggests a need to address the impact of the practice environment on nursing students' confidence in what they are learning about patient safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

2008 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Lamoreaux, Richard W.

2008-01-01

Welcome to the 2008 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides a NASA Range Safety overview for current and potential range users. This year, along with full length articles concerning various subject areas, we have provided updates to standard subjects with links back to the 2007 original article. Additionally, we present summaries from the various NASA Range Safety Program activities that took place throughout the year, as well as information on several special projects that may have a profound impact on the way we will do business in the future. The sections include a program overview and 2008 highlights of Range Safety Training; Range Safety Policy; Independent Assessments and Common Risk Analysis Tools Development; Support to Program Operations at all ranges conducting NASA launch operations; a continuing overview of emerging Range Safety-related technologies; Special Interests Items that include recent changes in the ELV Payload Safety Program and the VAS explosive siting study; and status reports from all of the NASA Centers that have Range Safety responsibilities. As is the case each year, contributors to this report are too numerous to mention, but we thank individuals from the NASA Centers, the Department of Defense, and civilian organizations for their contributions. We have made a great effort to include the most current information available. We recommend that this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. This is the third year we have utilized this web-based format for the annual report. We continually receive positive feedback on the web-based edition, and we hope you enjoy this year's product as well. It has been a very busy and productive year on many fronts as you will note as you review this report. Thank you to everyone who contributed to make this year a successful one, and I look forward to working with all of you in the years to come.

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Development and approval of worker safety and health program. 851.11 Section 851.11 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.11 Development and approval of worker safety and health program. (a) Preparation and...

CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User`s manual to Version 1b (including program reference)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, T.F.; Gerhard, M.A.; Trummer, D.J.

CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user`s manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers withmore » a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests.« less

Forward Skirt Structural Testing on the Space Launch System (SLS) Program

NASA Technical Reports Server (NTRS)

Lohrer, J. D.; Wright, R. D.

2016-01-01

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the NASA Space Launch System (SLS) program. Testing was needed because SLS ascent loads are 35% higher than Space Shuttle loads. Objectives of testing were to determine margins of safety, demonstrate reliability, and validate analytical models. Testing combined with analysis was able to show heritage forward skirts were acceptable to use on the SLS program.

Mortality Trends After a Voluntary Checklist-based Surgical Safety Collaborative.

PubMed

Haynes, Alex B; Edmondson, Lizabeth; Lipsitz, Stuart R; Molina, George; Neville, Bridget A; Singer, Sara J; Moonan, Aunyika T; Childers, Ashley Kay; Foster, Richard; Gibbons, Lorri R; Gawande, Atul A; Berry, William R

2017-12-01

To determine whether completion of a voluntary, checklist-based surgical quality improvement program is associated with reduced 30-day postoperative mortality. Despite evidence of efficacy of team-based surgical safety checklists in improving perioperative outcomes in research trials, effective methods of population-based implementation have been lacking. The Safe Surgery 2015 South Carolina program was designed to foster state-wide engagement of hospitals in a voluntary, collaborative implementation of a checklist program. We compared postoperative mortality rates after inpatient surgery in South Carolina utilizing state-wide all-payer discharge claims from 2008 to 2013, linked with state vital statistics, stratifying hospitals on the basis of completion of the checklist program. Changes in risk-adjusted 30-day mortality were compared between hospitals, using propensity score-adjusted difference-in-differences analysis. Fourteen hospitals completed the program by December 2013. Before program launch, there was no difference in mortality trends between the completion cohort and all others (P = 0.33), but postoperative mortality diverged thereafter (P = 0.021). Risk-adjusted 30-day mortality among completers was 3.38% in 2010 and 2.84% in 2013 (P < 0.00001), whereas mortality among other hospitals (n = 44) was 3.50% in 2010 and 3.71% in 2013 (P = 0.3281), reflecting a 22% difference between the groups on difference-in-differences analysis (P = 0.0021). Despite similar pre-existing rates and trends of postoperative mortality, hospitals in South Carolina completing a voluntary checklist-based surgical quality improvement program had a reduction in deaths after inpatient surgery over the first 3 years of the collaborative compared with other hospitals in the state. This may indicate that effective large-scale implementation of a team-based surgical safety checklist is feasible.

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

A Template Analysis of Intimate Partner Violence Survivors' Experiences of Animal Maltreatment: Implications for Safety Planning and Intervention.

PubMed

Collins, Elizabeth A; Cody, Anna M; McDonald, Shelby Elaine; Nicotera, Nicole; Ascione, Frank R; Williams, James Herbert

2018-03-01

This study explores the intersection of intimate partner violence (IPV) and animal cruelty in an ethnically diverse sample of 103 pet-owning IPV survivors recruited from community-based domestic violence programs. Template analysis revealed five themes: (a) Animal Maltreatment by Partner as a Tactic of Coercive Power and Control, (b) Animal Maltreatment by Partner as Discipline or Punishment of Pet, (c) Animal Maltreatment by Children, (d) Emotional and Psychological Impact of Animal Maltreatment Exposure, and (e) Pets as an Obstacle to Effective Safety Planning. Results demonstrate the potential impact of animal maltreatment exposure on women and child IPV survivors' health and safety.

A Template Analysis of Intimate Partner Violence Survivors’ Experiences of Animal Maltreatment: Implications for Safety Planning and Intervention

PubMed Central

Collins, Elizabeth A.; Cody, Anna M.; McDonald, Shelby Elaine; Nicotera, Nicole; Ascione, Frank R.; Williams, James Herbert

2018-01-01

This study explores the intersection of intimate partner violence (IPV) and animal cruelty in an ethnically diverse sample of 103 pet-owning IPV survivors recruited from community-based domestic violence programs. Template analysis revealed five themes: (a) Animal Maltreatment by Partner as a Tactic of Coercive Power and Control, (b) Animal Maltreatment by Partner as Discipline or Punishment of Pet, (c) Animal Maltreatment by Children, (d) Emotional and Psychological Impact of Animal Maltreatment Exposure, and (e) Pets as an Obstacle to Effective Safety Planning. Results demonstrate the potential impact of animal maltreatment exposure on women and child IPV survivors’ health and safety. PMID:29332521

Cost-outcome analysis in injury prevention and control: eighty-four recent estimates for the United States.

PubMed

Miller, T R; Levy, D T

2000-06-01

The objectives of this study were to review cost-outcome analyses in injury prevention and control and estimate associated benefit-cost ratios and cost per quality-adjusted life-year. Medline and Internet search, bibliographic review, and federal agency contacts identified published and unpublished studies from 1987 to 1998 for the United States. Studies of low quality and analyses of occupational, air, rail, and water transport safety programs were excluded. Selected results were recomputed to increase discount rate, benefit category, and benefit estimate comparability and to update injury incidence rates. More than half of the 84 injury prevention measures reviewed yielded net societal cost savings. Twelve measures had costs that exceeded benefits. Of 33 road safety measures analyzed, 19 yielded net cost savings. Of 34 violence prevention approaches studied, 19 yielded net cost savings, whereas 8 had costs that exceeded benefits. Interventions with the highest benefit-cost ratios included juvenile delinquent therapy programs, fire-safe cigarettes, federal road and traffic safety program funding, lane markers painted on roads, post-mounted reflectors on hazardous curves, safety belts in front seats, safety belt laws with primary enforcement, child safety seats, child bicycle helmets, enforcement of laws against serving alcohol to the intoxicated, substance abuse treatment, brief medical interventions with heavy drinkers, and a comprehensive safe communities program in a low-income neighborhood. Studies of cost-saving measures do not exist for several injury types. Injury prevention often can reduce medical costs and save lives. Wider implementation of proven measures is warranted.

2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-10-01

This report summarizes comments from the Peer Review Panel at the 2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 16-20, 2014, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 8-12, 2015, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

A Comprehensive Review of School-Based Body Mass Index Screening Programs and Their Implications for School Health: Do the Controversies Accurately Reflect the Research?

ERIC Educational Resources Information Center

Ruggieri, Dominique G.; Bass, Sarah B.

2015-01-01

Background: Whereas legislation for body mass index (BMI) surveillance and screening programs has passed in 25 states, the programs are often subject to ethical debates about confidentiality and privacy, school-to-parent communication, and safety and self-esteem issues for students. Despite this debate, no comprehensive analysis has been completed…

2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2012-09-01

This report summarizes comments from the Peer Review Panel at the 2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 14-18, 2012, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-09-01

This report summarizes comments from the Peer Review Panel at the 2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 9-13, 2011, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

77 FR 70409 - System Safety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their... Division, U.S. Department of Transportation, Federal Railroad Administration, Office of Railroad Safety...

Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-06-01

The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportationmore » safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included.« less

Evaluating the effectiveness of the Safety Investment Program (SIP) policies for Oregon.

DOT National Transportation Integrated Search

2009-10-01

The Safety Investment Program (SIP) was originally called the Statewide Transportation Improvement Program - : Safety Investment Program (STIP-SIP). The concept of the program was first discussed in October 1997 and the : program was adopted by the O...

23 CFR Appendix C to Part 1200 - ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM C APPENDIX C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C APPENDIX C TO PART 1200—ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

23 CFR Appendix C to Part 1200 - Assurances for Teen Traffic Safety Program

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Assurances for Teen Traffic Safety Program C Appendix C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C Appendix C to Part 1200—Assurances for Teen Traffic Safety Program State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

Health and safety programs for art and theater schools.

PubMed

McCann, M

2001-01-01

A wide variety of health and safety hazards exist in schools and colleges of art and theater due to a lack of formal health and safety programs and a failure to include health and safety concerns during planning of new facilities and renovation of existing facilities. This chapter discusses the elements of a health and safety program as well as safety-related structural and equipment needs that should be in the plans for any school of art or theater. These elements include curriculum content, ventilation, storage, housekeeping, waste management, fire and explosion prevention, machine and tool safety, electrical safety, noise, heat stress, and life safety and emergency procedures and equipment. Ideally, these elements should be incorporated into the plans for any new facilities, but ongoing programs can also benefit from a review of existing health and safety programs.

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2011 CFR

2011-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2011-04-01 2011-04-01 false How can IRR Program funds be used for highway safety? 170...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2010 CFR

2010-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2010-04-01 2010-04-01 false How can IRR Program funds be used for highway safety? 170...

23 CFR 1200.11 - Contents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 402 program. (g) Teen Traffic Safety Program. If the State elects to include the Teen Traffic Safety... of the Teen Traffic Safety Program—a statewide program to improve traffic safety for teen drivers—and...

23 CFR 1200.11 - Contents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 402 program. (g) Teen Traffic Safety Program. If the State elects to include the Teen Traffic Safety... of the Teen Traffic Safety Program—a statewide program to improve traffic safety for teen drivers—and...

A measurement tool to assess culture change regarding patient safety in hospital obstetrical units.

PubMed

Kenneth Milne, J; Bendaly, Nicole; Bendaly, Leslie; Worsley, Jill; FitzGerald, John; Nisker, Jeff

2010-06-01

Clinical error in acute care hospitals can only be addressed by developing a culture of safety. We sought to develop a cultural assessment survey (CAS) to assess patient safety culture change in obstetrical units. Interview prompts and a preliminary questionnaire were developed through a literature review of patient safety and "high reliability organizations," followed by interviews with members of the Managing Obstetrical Risk Efficiently (MOREOB) Program of the Society of Obstetricians and Gynaecologists of Canada. Three hundred preliminary questionnaires were mailed, and 21 interviews and 9 focus groups were conducted with the staff of 11 hospital sites participating in the program. To pilot test the CAS, 350 surveys were mailed to staff in participating hospitals, and interviews were conducted with seven nurses and five physicians who had completed the survey. Reliability analysis was conducted on four units that completed the CAS prior to and following the implementation of the first MOREOB module. Nineteen values and 105 behaviours, practices, and perceptions relating to patient safety were identified and included in the preliminary questionnaire, of which 143 of 300 (47.4%) were returned. Among the 220 cultural assessment surveys returned (62.9%), six cultural scales emerged: (1) patient safety as everyone's priority; (2) teamwork; (3) valuing individuals; (4) open communication; (5) learning; and (6) empowering individuals. The reliability analysis found all six scales to have internal reliability (Cronbach alpha), ranging from 0.72 (open communication) to 0.84 (valuing individuals). The CAS developed for this study may enable obstetrical units to assess change in patient safety culture.

Analysis of Associate Degree Program for Traffic Safety Technicians. Final Report.

ERIC Educational Resources Information Center

Shimada, Jonathan K.

A study was conducted to evaluate the impact of the Associate Degree Program for Traffic Engineering Technicians (TET's) offered at three community colleges on students' subsequent job performance as technicians. Data were collected by means of personal interviews and telephone interviews with 81 students, their primary instructors, and their…

A Safety Program that Integrated Behavior-Based Safety and Traditional Safety Methods and Its Effects on Injury Rates of Manufacturing Workers

ERIC Educational Resources Information Center

Hermann, Jaime A.; Ibarra, Guillermo V.; Hopkins, B. L.

2010-01-01

The present research examines the effects of a complex safety program that combined Behavior-Based Safety (BBS) and traditional safety methods. The study was conducted in an automobile parts plant in Mexico. Two sister plants served as comparison. Some of the components of the safety programs addressed behaviors of managers and included methods…

Early impact of a national multi-faceted road safety intervention program in Mexico: results of a time-series analysis.

PubMed

Chandran, Aruna; Pérez-Núñez, Ricardo; Bachani, Abdulgafoor M; Híjar, Martha; Salinas-Rodríguez, Aarón; Hyder, Adnan A

2014-01-01

In January 2008, a national multifaceted road safety intervention program (IMESEVI) funded by the Bloomberg Philanthropies was launched in Mexico. Two years later in 2010, IMESEVI was refocused as part of a 10-country international consortium demonstration project (IMESEVI/RS10). We evaluate the initial effects of each phase of the road safety intervention project on numbers of RT crashes, injuries and deaths in Mexico and in the two main target cities of Guadalajara-Zapopan and León. An interrupted time series analysis using autoregressive integrated moving average (ARIMA) modeling was performed using monthly data of rates of RT crashes and injuries (police data), as well as deaths (mortality system data) from 1999-2011 with dummy variables representing each intervention phase. In the period following the first intervention phase at the country level and in the city of León, the rate of RT crashes decreased significantly (p<0.05). Notably, following the second intervention phase although there was no reduction at the country level, there has been a decrease in the RT crash rate in both Guadalajara-Zapopan (p = 0.029) and in León (p = 0.029). There were no significant differences in the RT injury or death rates following either intervention phase in either city. These initial results suggest that a multi-faceted road safety intervention program appears to be effective in reducing road crashes in a middle-income country setting. Further analysis is needed to differentiate the effects of various interventions, and to determine what other economic and political factors might have affected this change.

Early Impact of a National Multi-Faceted Road Safety Intervention Program in Mexico: Results of a Time-Series Analysis

PubMed Central

Chandran, Aruna; Pérez-Núñez, Ricardo; Bachani, Abdulgafoor M.; Híjar, Martha; Salinas-Rodríguez, Aarón; Hyder, Adnan A.

2014-01-01

Background In January 2008, a national multifaceted road safety intervention program (IMESEVI) funded by the Bloomberg Philanthropies was launched in Mexico. Two years later in 2010, IMESEVI was refocused as part of a 10-country international consortium demonstration project (IMESEVI/RS10). We evaluate the initial effects of each phase of the road safety intervention project on numbers of RT crashes, injuries and deaths in Mexico and in the two main target cities of Guadalajara-Zapopan and León. Methods An interrupted time series analysis using autoregressive integrated moving average (ARIMA) modeling was performed using monthly data of rates of RT crashes and injuries (police data), as well as deaths (mortality system data) from 1999–2011 with dummy variables representing each intervention phase. Results In the period following the first intervention phase at the country level and in the city of León, the rate of RT crashes decreased significantly (p<0.05). Notably, following the second intervention phase although there was no reduction at the country level, there has been a decrease in the RT crash rate in both Guadalajara-Zapopan (p = 0.029) and in León (p = 0.029). There were no significant differences in the RT injury or death rates following either intervention phase in either city. Conclusion These initial results suggest that a multi-faceted road safety intervention program appears to be effective in reducing road crashes in a middle-income country setting. Further analysis is needed to differentiate the effects of various interventions, and to determine what other economic and political factors might have affected this change. PMID:24498114

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

Ad hoc versus standardized admixtures for continuous infusion drugs in neonatal intensive care: cognitive task analysis of safety at the bedside.

PubMed

Brannon, Timothy S

2006-01-01

Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside.

Ad Hoc versus Standardized Admixtures for Continuous Infusion Drugs in Neonatal Intensive Care: Cognitive Task Analysis of Safety at the Bedside

PubMed Central

Brannon, Timothy S.

2006-01-01

Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside. PMID:17238482

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

Risk-informed Management of Water Infrastructure in the United States: History, Development, and Best Practices

NASA Astrophysics Data System (ADS)

Wolfhope, J.

2017-12-01

This presentation will focus on the history, development, and best practices for evaluating the risks associated with the portfolio of water infrastructure in the United States. These practices have evolved from the early development of the Federal Guidelines for Dam Safety and the establishment of the National Dam Safety Program, to the most recent update of the Best Practices for Dam and Levee Risk Analysis jointly published by the U.S. Department of Interior Bureau of Reclamation and the U.S. Army Corps of Engineers. Since President Obama signed the Water Infrastructure Improvements for the Nation Act (WIIN) Act, on December 16, 2016, adding a new grant program under FEMA's National Dam Safety Program, the focus has been on establishing a risk-based priority system for use in identifying eligible high hazard potential dams for which grants may be made. Finally, the presentation provides thoughts on the future direction and priorities for managing the risk of dams and levees in the United States.

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aviation Safety Reporting Program... GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against... to the National Aeronautics and Space Administration under the Aviation Safety Reporting Program (or...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

OSHA Training Programs. Module SH-48. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

14 CFR 417.207 - Trajectory analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... any stage that has the potential to impact the Earth and does not burn to propellant depletion before a programmed thrust termination. (3) For launch vehicles flown with a flight safety system, a...

14 CFR 417.207 - Trajectory analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... any stage that has the potential to impact the Earth and does not burn to propellant depletion before a programmed thrust termination. (3) For launch vehicles flown with a flight safety system, a...

14 CFR 417.207 - Trajectory analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... any stage that has the potential to impact the Earth and does not burn to propellant depletion before a programmed thrust termination. (3) For launch vehicles flown with a flight safety system, a...

EMC analysis of MOS-1

NASA Astrophysics Data System (ADS)

Ishizawa, Y.; Abe, K.; Shirako, G.; Takai, T.; Kato, H.

The electromagnetic compatibility (EMC) control method, system EMC analysis method, and system test method which have been applied to test the components of the MOS-1 satellite are described. The merits and demerits of the problem solving, specification, and system approaches to EMC control are summarized, and the data requirements of the SEMCAP (specification and electromagnetic compatibility analysis program) computer program for verifying the EMI safety margin of the components are sumamrized. Examples of EMC design are mentioned, and the EMC design process and selection method for EMC critical points are shown along with sample EMC test results.

The Financial Effect of Value-Based Purchasing and the Hospital Readmissions Reduction Program on Safety-Net Hospitals in 2014: A Cohort Study.

PubMed

Gilman, Matlin; Hockenberry, Jason M; Adams, E Kathleen; Milstein, Arnold S; Wilson, Ira B; Becker, Edmund R

2015-09-15

Medicare's value-based purchasing (VBP) and the Hospital Readmissions Reduction Program (HRRP) could disproportionately affect safety-net hospitals. To determine whether safety-net hospitals incur larger financial penalties than other hospitals under VBP and HRRP. Cross-sectional analysis. United States in 2014. 3022 acute care hospitals participating in VBP and the HRRP. Safety-net hospitals were defined as being in the top quartile of the Medicare disproportionate share hospital (DSH) patient percentage and Medicare uncompensated care (UCC) payments per bed. The differences in penalties in both total dollars and dollars per bed between safety-net hospitals and other hospitals were estimated with the use of bivariate and graphical regression methods. Safety-net hospitals in the top quartile of each measure were more likely to be penalized under VBP than other hospitals (62.9% vs. 51.0% under the DSH definition and 60.3% vs. 51.5% under the UCC per-bed definition). This was also the case under the HRRP (80.8% vs. 69.0% and 81.9% vs. 68.7%, respectively). Safety-net hospitals also had larger payment penalties ($115 900 vs. $66 600 and $150 100 vs. $54 900, respectively). On a per-bed basis, this translated to $436 versus $332 and $491 versus $314, respectively. Sensitivity analysis setting the cutoff at the top decile rather than the top quartile decile led to similar conclusions with somewhat larger differences between safety-net and other hospitals. The quadratic fit of the data indicated that the larger effect of these penalties is in the middle of the distribution of the DSH and UCC measures. Only 2 measures of safety-net status were included in the analyses. Safety-net hospitals were disproportionately likely to be affected under VBP and the HRRP, but most incurred relatively small payment penalties in 2014. Patient-Centered Outcomes Research Institute.

Reliability/safety analysis of a fly-by-wire system

NASA Technical Reports Server (NTRS)

Brock, L. D.; Goddman, H. A.

1980-01-01

An analysis technique has been developed to estimate the reliability of a very complex, safety-critical system by constructing a diagram of the reliability equations for the total system. This diagram has many of the characteristics of a fault-tree or success-path diagram, but is much easier to construct for complex redundant systems. The diagram provides insight into system failure characteristics and identifies the most likely failure modes. A computer program aids in the construction of the diagram and the computation of reliability. Analysis of the NASA F-8 Digital Fly-by-Wire Flight Control System is used to illustrate the technique.

Population-level administration of AlcoholEdu for college: an ARIMA time-series analysis.

PubMed

Wyatt, Todd M; Dejong, William; Dixon, Elizabeth

2013-08-01

Autoregressive integrated moving averages (ARIMA) is a powerful analytic tool for conducting interrupted time-series analysis, yet it is rarely used in studies of public health campaigns or programs. This study demonstrated the use of ARIMA to assess AlcoholEdu for College, an online alcohol education course for first-year students, and other health and safety programs introduced at a moderate-size public university in the South. From 1992 to 2009, the university administered annual Core Alcohol and Drug Surveys to samples of undergraduates (Ns = 498 to 1032). AlcoholEdu and other health and safety programs that began during the study period were assessed through a series of quasi-experimental ARIMA analyses. Implementation of AlcoholEdu in 2004 was significantly associated with substantial decreases in alcohol consumption and alcohol- or drug-related negative consequences. These improvements were sustained over time as succeeding first-year classes took the course. Previous studies have shown that AlcoholEdu has an initial positive effect on students' alcohol use and associated negative consequences. This investigation suggests that these positive changes may be sustainable over time through yearly implementation of the course with first-year students. ARIMA time-series analysis holds great promise for investigating the effect of program and policy interventions to address alcohol- and drug-related problems on campus.

Identification of Crew-Systems Interactions and Decision Related Trends

NASA Technical Reports Server (NTRS)

Jones, Sharon Monica; Evans, Joni K.; Reveley, Mary S.; Withrow, Colleen A.; Ancel, Ersin; Barr, Lawrence

2013-01-01

NASA Vehicle System Safety Technology (VSST) project management uses systems analysis to identify key issues and maintain a portfolio of research leading to potential solutions to its three identified technical challenges. Statistical data and published safety priority lists from academic, industry and other government agencies were reviewed and analyzed by NASA Aviation Safety Program (AvSP) systems analysis personnel to identify issues and future research needs related to one of VSST's technical challenges, Crew Decision Making (CDM). The data examined in the study were obtained from the National Transportation Safety Board (NTSB) Aviation Accident and Incident Data System, Federal Aviation Administration (FAA) Accident/Incident Data System and the NASA Aviation Safety Reporting System (ASRS). In addition, this report contains the results of a review of safety priority lists, information databases and other documented references pertaining to aviation crew systems issues and future research needs. The specific sources examined were: Commercial Aviation Safety Team (CAST) Safety Enhancements Reserved for Future Implementation (SERFIs), Flight Deck Automation Issues (FDAI) and NTSB Most Wanted List and Open Recommendations. Various automation issues taxonomies and priority lists pertaining to human factors, automation and flight design were combined to create a list of automation issues related to CDM.

Waste isolation safety assessment program. Task 4. Third contractor information meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-06-01

The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less

Informing a pedestrian safety improvement program.

DOT National Transportation Integrated Search

2009-01-01

Caltrans is scoping the development of a Pedestrian Safety Improvement Program (PSIP). In its mission, organization or implementation, such a program might be analogous to the agencys existing Highway Safety Improvement Program (HSIP). The HSIP (s...

A comprehensive obstetric patient safety program reduces liability claims and payments.

PubMed

Pettker, Christian M; Thung, Stephen F; Lipkind, Heather S; Illuzzi, Jessica L; Buhimschi, Catalin S; Raab, Cheryl A; Copel, Joshua A; Lockwood, Charles J; Funai, Edmund F

2014-10-01

Begun in 2003, the Yale-New Haven Hospital comprehensive obstetric safety program consisted of measures to standardize care, improve teamwork and communication, and optimize oversight and quality review. Prior publications have demonstrated improvements in adverse outcomes and safety culture associated with this program. In this analysis, we aimed to assess the impact of this program on liability claims and payments at a single institution. We reviewed liability claims at a single, tertiary-care, teaching hospital for two 5-year periods (1998-2002 and 2003-2007), before and after implementing the safety program. Connecticut statute of limitations for professional malpractice is 36 months from injury. Claims/events were classified by event-year and payments were adjusted for inflation. We analyzed data for trends as well as differences between periods before and after implementation. Forty-four claims were filed during the 10-year study period. Annual cases per 1000 deliveries decreased significantly over the study period (P < .01). Claims (30 vs 14) and payments ($50.7 million vs $2.9 million) decreased in the 5-years after program inception. Compared with before program inception, median annual claims dropped from 1.31 to 0.64 (P = .02), and median annual payments per 1000 deliveries decreased from $1,141,638 to $63,470 (P < .01). Even estimating the monetary awards for the 2 remaining open cases using the median payments for the surrounding 5 years, a reduction in the median monetary amount per case resulting in payment to the claimant was also statistically significant ($632,262 vs $216,815, P = .046). In contrast, the Connecticut insurance market experienced a stable number of claims and markedly increased cost per claim during the same period. We conclude that an obstetric safety initiative can improve liability claims exposure and reduce liability payments. Copyright © 2014 Elsevier Inc. All rights reserved.

Advancing perinatal patient safety through application of safety science principles using health IT.

PubMed

Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

2017-12-19

The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated into materials to facilitate the implementation of perinatal safety initiatives.

Space station (modular) mission analysis. Volume 1: Mission analysis

NASA Technical Reports Server (NTRS)

1971-01-01

The mission analysis on the modular space station considers experimental requirements and options characterized by low initial cost and incremental manning. Features that affect initial development and early operating costs are identified and their impacts on the program are assessed. Considered are the areas of experiment, mission, operations, information management, and long life and safety analyses.

2006 Oregon traffic crash summary

DOT National Transportation Integrated Search

2007-06-01

The Crash Analysis and Reporting Unit compiles data for reported motor vehicle traffic crashes occurring : on city streets, county roads and state highways. The data supports various local, county and state traffic : safety programs, engineering and ...

2007 Oregon traffic crash summary

DOT National Transportation Integrated Search

2008-07-01

The Crash Analysis and Reporting Unit compiles data for reported motor vehicle traffic crashes occurring : on city streets, county roads and state highways. The data supports various local, county and state traffic : safety programs, engineering and ...

2005 Oregon traffic crash summary

DOT National Transportation Integrated Search

2006-06-01

The Crash Analysis and Reporting Unit compiles data for reported motor vehicle traffic crashes occurring : on city streets, county roads and state highways. The data supports various local, county and state traffic : safety programs, engineering and ...

Canadian Pacific Railway Investigation of Safety-Related Occurrences Protocol considered helpful by both labor and management.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program sponsored an Alternative Safety Measures Program designed to explore alternative methods for evaluating whether safety programs improve safety outcomes and...

49 CFR Appendix C to Part 195 - Guidance for Implementation of an Integrity Management Program

Code of Federal Regulations, 2010 CFR

2010-10-01

... (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED... understanding and analysis of the failure mechanisms or threats to integrity of each pipeline segment. (2) An... pipeline, information and data used for the information analysis; (13) results of the information analyses...

Natural Resources. Ohio's Competency Analysis Profile. Forest Industry Worker. Resource Conservation.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This competency analysis profile lists 155 competencies that have been identified by employers as core competencies for inclusion in programs to train forest industry and resource conservation workers. The core competencies are organized into 10 units dealing the following: general safety precautions, natural resource industry operations, soil…

An Evaluation of a Classroom Science Intervention Designed to Extend the Bicycle Helmet Safety Message

ERIC Educational Resources Information Center

McPherson, Moira N.; Marsh, Pamela K.; Montelpare, William J.; Van Barneveld, Christina; Zerpa, Carlos E.

2009-01-01

Background: Wizards of Motion is a program of curriculum delivery through which experts in Kinesiology introduce grade 7 students to applications of physics for human movement. The program is linked closely to Ministry of Education curriculum requirements but includes human movement applications and data analysis experiences. Purpose: The purpose…

Commercial objectives, technology transfer, and systems analysis for fusion power development

NASA Astrophysics Data System (ADS)

Dean, Stephen O.

1988-09-01

Fusion is an inexhaustible source of energy that has the potential for economic commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion energy development program is the generation of central station electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high energy neutrons suggests potentially unique applications. In addition, fusion R and D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other, are the two primary criteria for setting long range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R and D program toward practical applications. The transfer of fusion technology and skills from the national labs and universities to industry is the key to achieving the long range objective of commercial fusion applications.

Commercial objectives, technology transfer, and systems analysis for fusion power development

NASA Technical Reports Server (NTRS)

Dean, Stephen O.

1988-01-01

Fusion is an inexhaustible source of energy that has the potential for economic commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion energy development program is the generation of central station electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high energy neutrons suggests potentially unique applications. In addition, fusion R and D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other, are the two primary criteria for setting long range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R and D program toward practical applications. The transfer of fusion technology and skills from the national labs and universities to industry is the key to achieving the long range objective of commercial fusion applications.

Guidance on health effects of toxic chemicals. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, C.B.; Griffin, G.D.; Munro, N.B.

1994-02-01

Martin Marietta Energy Systems, Inc. (MMES), and Martin Marietta Utility Services, Inc. (MMUS), are engaged in phased programs to update the safety documentation for the existing US Department of Energy (DOE)-owned facilities. The safety analysis of potential toxic hazards requires a methodology for evaluating human health effects of predicted toxic exposures. This report provides a consistent set of health effects and documents toxicity estimates corresponding to these health effects for some of the more important chemicals found within MMES and MMUS. The estimates are based on published toxicity information and apply to acute exposures for an ``average`` individual. The healthmore » effects (toxicological endpoints) used in this report are (1) the detection threshold; (2) the no-observed adverse effect level; (3) the onset of irritation/reversible effects; (4) the onset of irreversible effects; and (5) a lethal exposure, defined to be the 50% lethal level. An irreversible effect is defined as a significant effect on a person`s quality of life, e.g., serious injury. Predicted consequences are evaluated on the basis of concentration and exposure time.« less

Safety climate in university and college laboratories: impact of organizational and individual factors.

PubMed

Wu, Tsung-Chih; Liu, Chi-Wei; Lu, Mu-Chen

2007-01-01

Universities and colleges serve to be institutions of education excellence; however, problems in the areas of occupational safety may undermine such goals. Occupational safety must be the concern of every employee in the organization, regardless of job position. Safety climate surveys have been suggested as important tools for measuring the effectiveness and improvement direction of safety programs. Thus, this study aims to investigate the influence of organizational and individual factors on safety climate in university and college laboratories. Employees at 100 universities and colleges in Taiwan were mailed a self-administered questionnaire survey; the response rate was 78%. Multivariate analysis of variance revealed that organizational category of ownership, the presence of a safety manager and safety committee, gender, age, title, accident experience, and safety training significantly affected the climate. Among them, accident experience and safety training affected the climate with practical significance. The authors recommend that managers should address important factors affecting safety issues and then create a positive climate by enforcing continuous improvements.

Keeping the "continuous" in continuous quality improvement: exploring perceived outcomes of CQI program use in community pharmacy.

PubMed

Boyle, Todd A; Bishop, Andrea C; Duggan, Kellie; Reid, Carolyn; Mahaffey, Thomas; MacKinnon, Neil J; Mahaffey, Amelia

2014-01-01

Given the significant potential of continuous quality improvement (CQI) programs in enhancing overall levels of patient safety, community pharmacies in North America are under increasing pressure to have a formal and documented CQI program in place. However, while such initiatives may seem great on paper, in practice the outcomes of such programs to community pharmacy practice remain unclear. To explore the perceived outcomes identified by community pharmacies that adopted and actively used a standardized (i.e., common across pharmacies) CQI program for at least 1 year and to develop a framework for how such outcomes were achieved. A multi-site study of SafetyNET-Rx, a standardized and technologically sophisticated (e.g., online reporting of medication errors to a national database) CQI program, involving community pharmacies in Nova Scotia, Canada, was performed. During the summer and fall of 2011, 22 interviews were conducted with the CQI facilitators in 12 Nova Scotia community pharmacies; equally split between independent/banners and corporate chains. Of the CQI facilitators, 14 were pharmacists, while the remaining eight were pharmacy technicians. Thematic analysis following the procedures presented by Braun and Clarke was adopted to identify and explore the major outcomes. Results of the thematic analysis highlighted a number of perceived outcomes from the use of a standardized CQI program in community pharmacies, specifically: (1) perceived reduction in the number of medication errors that were occurring in the pharmacy, (2) increased awareness/confidence of individual actions related to dispensing, (3) increased understanding of the dispensing and related processes/workflow, (4) increased openness to talking about medication errors among pharmacy staff, and (5) quality and safety becoming more entrenched in the workflow (e.g., staff is more aware of their roles and responsibilities in patient safety and confident that the dispensing processes are safe and reliable). In achieving such outcomes, pharmacies had to balance customizing the CQI program to address a number of operational challenges, with ensuring that the core standardized components remained in place. This research identified the perceived outcomes of CQI program use by CQI facilitators. Additionally, the findings are incorporated into a framework for CQI implementation that can be used by pharmacy managers, corporate head offices, and regulatory authorities to leverage greater CQI adoption and success. Copyright © 2014 Elsevier Inc. All rights reserved.

Risk management systems for health care and safety development on transplantation: a review and a proposal.

PubMed

Pretagostini, R; Gabbrielli, F; Fiaschetti, P; Oliveti, A; Cenci, S; Peritore, D; Stabile, D

2010-05-01

Starting from the report on medical errors published in 1999 by the US Institute of Medicine, a number of different approaches to risk management have been developed for maximum risk reduction in health care activities. The health care authorities in many countries have focused attention on patient safety, employing action research programs that are based on quite different principles. We performed a systematic Medline research of the literature since 1999. The following key words were used, also combining boolean operators and medical subheading terms: "adverse event," "risk management," "error," and "governance." Studies published in the last 5 years were particularly classified in various groups: risk management in health care systems; safety in specific hospital activities; and health care institutions' official documents. Methods of action researches have been analysed and their characteristics compared. Their suitability for safety development in donation, retrieval, and transplantation processes were discussed in the reality of the Italian transplant network. Some action researches and studies were dedicated to entire national healthcare systems, whereas others focused on specific risks. Many research programs have undergone critical review in the literature. Retrospective analysis has centered on so-called sentinel events to particularly analyze only a minor portion of the organizational phenomena, which can be the origin of an adverse event, an incident, or an error. Sentinel events give useful information if they are studied in highly engineered and standardized organizations like laboratories or tissue establishments, but they show several limits in the analysis of organ donation, retrieval, and transplantation processes, which are characterized by prevailing human factors, with high intrinsic risk and variability. Thus, they are poorly effective to deliver sure elements to base safety management improvement programs, especially regarding multidisciplinary systems with high complexity. In organ transplantation, the possibility to increase safety seems greater using proactive research, mainly centred on organizational processes together with retrospective analyses but not limited to sentinel event reports. Copyright (c) 2010. Published by Elsevier Inc.

An Overview of the NASA Aviation Safety Program (AVSP) Systemwide Accident Prevention (SWAP) Human Performance Modeling (HPM) Element

NASA Technical Reports Server (NTRS)

Foyle, David C.; Goodman, Allen; Hooley, Becky L.

2003-01-01

An overview is provided of the Human Performance Modeling (HPM) element within the NASA Aviation Safety Program (AvSP). Two separate model development tracks for performance modeling of real-world aviation environments are described: the first focuses on the advancement of cognitive modeling tools for system design, while the second centers on a prescriptive engineering model of activity tracking for error detection and analysis. A progressive implementation strategy for both tracks is discussed in which increasingly more complex, safety-relevant applications are undertaken to extend the state-of-the-art, as well as to reveal potential human-system vulnerabilities in the aviation domain. Of particular interest is the ability to predict the precursors to error and to assess potential mitigation strategies associated with the operational use of future flight deck technologies.

The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

2015-07-01

The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less

Trends in readmission rates for safety net hospitals and non-safety net hospitals in the era of the US Hospital Readmission Reduction Program: a retrospective time series analysis using Medicare administrative claims data from 2008 to 2015.

PubMed

Salerno, Amy M; Horwitz, Leora I; Kwon, Ji Young; Herrin, Jeph; Grady, Jacqueline N; Lin, Zhenqiu; Ross, Joseph S; Bernheim, Susannah M

2017-07-13

To compare trends in readmission rates among safety net and non-safety net hospitals under the US Hospital Readmission Reduction Program (HRRP). A retrospective time series analysis using Medicare administrative claims data from January 2008 to June 2015. We examined 3254 US hospitals eligible for penalties under the HRRP, categorised as safety net or non-safety net hospitals based on the hospital's proportion of patients with low socioeconomic status. Admissions for Medicare fee-for-service patients, age ≥65 years, discharged alive, who had a valid five-digit zip code and did not have a principal discharge diagnosis of cancer or psychiatric illness were included, for a total of 52 516 213 index admissions. Mean hospital-level, all-condition, 30-day risk-adjusted standardised unplanned readmission rate, measured quarterly, along with quarterly rate of change, and an interrupted time series examining: April-June 2010, after HRRP was passed, and October-December 2012, after HRRP penalties were implemented. 58.0% (SD 15.3) of safety net hospitals and 17.1% (SD 10.4) of non-safety net hospitals' patients were in the lowest quartile of socioeconomic status. The mean safety net hospital standardised readmission rate declined from 17.0% (SD 3.7) to 13.6% (SD 3.6), whereas the mean non-safety net hospital declined from 15.4% (SD 3.0) to 12.7% (SD 2.5). The absolute difference in rates between safety net and non-safety net hospitals declined from 1.6% (95% CI 1.3 to 1.9) to 0.9% (0.7 to 1.2). The quarterly decline in standardised readmission rates was 0.03 percentage points (95% CI 0.03 to 0.02, p<0.001) greater among safety net hospitals over the entire study period, and no differential change among safety net and non-safety net hospitals was found after either HRRP was passed or penalties enacted. Since HRRP was passed and penalties implemented, readmission rates for safety net hospitals have decreased more rapidly than those for non-safety net hospitals. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effects of an injury and illness prevention program on occupational safety behaviors among rice farmers in Nakhon Nayok Province, Thailand

PubMed Central

Santaweesuk, Sapsatree; Chapman, Robert S; Siriwong, Wattasit

2014-01-01

The objective of this study was to determine the effects of an Injury and Illness Prevention (IIP) program intervention on occupational safety behavior among rice farmers in Nakhon Nayok Province, Thailand. This was a quasi-experimental study in an intervention group and a control group. It was carried out in two rice farming communities, in which most people are rice farmers with similar socio-demographic characteristics. Multistage sampling was employed, selecting one person per rice farming household. The intervention group was 62 randomly selected rice farmers living in a rural area; another 55 rice farmers served as the control group. A structured face-to-face interview questionnaire was administered to participants to evaluate their safety behaviors in four areas: equipment use, pesticide use, ergonomics, and working conditions. The 2-week intervention program consisted of four elements: 1) health education, 2) safety inspection, 3) safety communication, and 4) health surveillance. Data were collected at baseline and 4 months after the intervention (follow-up). We used a general linear model repeated-measures analysis of variance to assess the mean difference between baseline and follow-up occupational safety behavior points between the intervention and control groups. Pesticide safety behaviors significantly increased in the intervention group compared with the control group. Ergonomics and working conditions points also increased in the intervention group, but not significantly so. The equipment use score decreased in the intervention group. It is necessary to identify and develop further measures to improve occupational safety behaviors. Some methods, such as effective risk communication, could be added to increase risk perception. PMID:24634590

A Laboratory Safety Program at Delaware.

ERIC Educational Resources Information Center

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

DOT National Transportation Integrated Search

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Applying the School Health Index to a nationally representative sample of schools: update for 2006.

PubMed

Brener, Nancy D; Pejavara, Anu; McManus, Tim

2011-02-01

The School Health Index (SHI) is a tool designed to help schools assess the extent to which they are implementing practices included in the research-based guidelines and strategies for school health and safety programs developed by the Centers for Disease Control and Prevention (CDC). CDC previously analyzed data from the 2000 School Health Policies and Programs Study (SHPPS) to determine the percentage of US schools meeting the recommendations in the SHI. A new edition of the SHI (2005) and the availability of 2006 SHPPS data made it necessary to update and repeat the analysis. SHPPS 2006 data were collected through computer-assisted personal interviews with faculty and staff in a nationally representative sample of schools. The data were then matched to SHI items to calculate the percentage of schools meeting the recommendations in 4 areas: school health and safety policies and environment, health education, physical education and other physical activity programs, and nutrition services. In accordance with the earlier findings, the present analysis indicated that schools nationwide were focusing their efforts on a few policies and programs rather than addressing the entire set of recommendations in the SHI. The percentage of items related to nutrition that schools met remained high, and an increase occurred in the percentage of items that schools met related to school health and safety policies and environment. More work needs to be done to assist schools in implementing school health policies and practices; this analysis helps identify specific areas where improvement is needed. © Published 2011. This article is a US Government work and is in the public domain in the USA.

The Accreditation Council for Graduate Medical Education's limits on residents' work hours and patient safety. A study of resident experiences and perceptions before and after hours reductions.

PubMed

Jagsi, Reshma; Weinstein, Debra F; Shapiro, Jo; Kitch, Barrett T; Dorer, David; Weissman, Joel S

2008-03-10

Limiting resident work hours may improve patient safety, but unintended adverse effects are also possible. We sought to assess the impact of Accreditation Council for Graduate Medical Education resident work hour limits implemented on July 1, 2003, on resident experiences and perceptions regarding patient safety. All trainees in 76 accredited programs at 2 teaching hospitals were surveyed in 2003 (preimplementation) and 2004 (postimplementation) regarding their work hours and patient load; perceived relation of work hours, patient load, and fatigue to patient safety; and experiences with adverse events and medical errors. Based on reported weekly duty hours, 13 programs experiencing substantial hours reductions were classified into a "reduced-hours" group. Change scores in outcome measures before and after policy implementation in the reduced-hours programs were compared with those in "other programs" to control for temporal trends, using 2-way analysis of variance with interaction. A total of 1770 responses were obtained (response rate, 60.0%). Analysis was restricted to 1498 responses from respondents in clinical years of training. Residents in the reduced-hours group reported significant reductions in mean weekly duty hours (from 76.6 to 68.0 hours, P < .001), and the percentage working more than 80 hours per week decreased from 44.0% to 16.6% (P < .001). No significant increases in patient load while on call (patients admitted, covered, or cross covered) were observed. Between 2003 and 2004, there was a decrease in the proportion of residents in the reduced-hours programs indicating that working too many hours (63.2% vs 44.0%; P < .001) or cross covering too many patients (65.9% vs 46.9%; P = .001) contributed to mistakes in patient care. There were no significant reductions in these 2 measures in the other group, and the differences in differences were significant (P = .03 and P = .02, respectively). The number of residents in reduced-hours programs who reported committing at least 1 medical error within the past week remained high in both study years (32.9% in 2003 and 26.3% in 2004, P = .27). It is possible to reduce residents' hours without increasing patient load. Doing so may reduce the extent to which fatigue affects patient safety as perceived by these frontline providers.

An Analysis of the Role of Social Safety Net Scholarships in Reducing School Drop-Out during the Indonesian Economic Crisis. Innocenti Working Papers.

ERIC Educational Resources Information Center

Cameron, Lisa A.

This paper uses regression and matching techniques to evaluate Indonesia's Social Safety Net Scholarships Programme. The scholarships program was developed to try to prevent large numbers of children from dropping out of school as a result of the Asian financial crisis. The expectation was that many families would find it difficult to keep their…

Chemical analysis of charged Li/SO(sub)2 cells

NASA Technical Reports Server (NTRS)

Subbarao, S.; Lawson, D.; Frank, H.; Halpert, G.; Barnes, J.; Bis, R.

1987-01-01

The initial focus of the program was to confirm that charging can indeed result in explosions and constitute a significant safety problem. Results of this initial effort clearly demonstrated that cells do indeed explode on charge and that charging does indeed constitute a real and severe safety problem. The results of the effort to identify the chemical reactions involved in and responsible for the observed behavior are described.

Architecture and Assessment: Privacy Preserving Biometrically Secured Electronic Documents

DTIC Science & Technology

2015-01-01

very large public and private fingerprint databases comprehensive risk analysis and system security contribution to developing international ...Safety and Security Program which is led by Defence Research and Development Canada’s Centre for Security Science, in partnership with Public Safety...201 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 201 Science and Engineering

Identification of Behavior Based Safety by Using Traffic Light Analysis to Reduce Accidents

NASA Astrophysics Data System (ADS)

Mansur, A.; Nasution, M. I.

2016-01-01

This work present the safety assessment of a case study and describes an important area within the field production in oil and gas industry, namely behavior based safety (BBS). The company set a rigorous BBS and its intervention program that implemented and deployed continually. In this case, observers requested to have discussion and spread a number of determined questions related with work behavior to the workers during observation. Appraisal of Traffic Light Analysis (TLA) as one tools of risk assessment used to determine the estimated score of BBS questionnaire. Standardization of TLA appraisal in this study are based on Regulation of Minister of Labor and Occupational Safety and Health No:PER.05/MEN/1996. The result shown that there are some points under 84%, which categorized in yellow category and should corrected immediately by company to prevent existing bad behavior of workers. The application of BBS expected to increase the safety performance at work time-by-time and effective in reducing accidents.

Practical Implementation of Failure Mode and Effects Analysis for Safety and Efficiency in Stereotactic Radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younge, Kelly Cooper, E-mail: kyounge@med.umich.edu; Wang, Yizhen; Thompson, John

2015-04-01

Purpose: To improve the safety and efficiency of a new stereotactic radiosurgery program with the application of failure mode and effects analysis (FMEA) performed by a multidisciplinary team of health care professionals. Methods and Materials: Representatives included physicists, therapists, dosimetrists, oncologists, and administrators. A detailed process tree was created from an initial high-level process tree to facilitate the identification of possible failure modes. Group members were asked to determine failure modes that they considered to be the highest risk before scoring failure modes. Risk priority numbers (RPNs) were determined by each group member individually and then averaged. Results: A totalmore » of 99 failure modes were identified. The 5 failure modes with an RPN above 150 were further analyzed to attempt to reduce these RPNs. Only 1 of the initial items that the group presumed to be high-risk (magnetic resonance imaging laterality reversed) was ranked in these top 5 items. New process controls were put in place to reduce the severity, occurrence, and detectability scores for all of the top 5 failure modes. Conclusions: FMEA is a valuable team activity that can assist in the creation or restructuring of a quality assurance program with the aim of improved safety, quality, and efficiency. Performing the FMEA helped group members to see how they fit into the bigger picture of the program, and it served to reduce biases and preconceived notions about which elements of the program were the riskiest.« less

Changing Safety Culture, One Step at a Time: The Value of the DOE-VPP Program at PNNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, Patrick A.; Isern, Nancy G.

2005-02-01

The primary value of the Pacific Northwest National Laboratory (PNNL) Voluntary Protection Program (VPP) is the ongoing partnership between management and staff committed to change Laboratory safety culture one step at a time. VPP enables PNNL's safety and health program to transcend a top-down, by-the-book approach to safety, and it also raises grassroots safety consciousness by promoting a commitment to safety and health 24 hours a day, 7 days a week. PNNL VPP is a dynamic, evolving program that fosters innovative approaches to continuous improvement in safety and health performance at the Laboratory.

Orbital transfer vehicle concept definition and systems analysis study. Volume 11: Study extension 2 results

NASA Technical Reports Server (NTRS)

Willcockson, W. H.

1988-01-01

Work conducted in the second extension of the Phase A Orbit Transfer Vehicle Concept Definition and Systems Analysis Study is summarized. Four major tasks were identified: (1) define an initial OTV program consistent with near term Civil Space Leadership Initiative missions; (2) develop program evolution to long term advanced missions; (3) investigate the implications of current STS safety policy on an Aft Cargo Carrier based OTV; and (4) expand the analysis of high entry velocity aeroassist. An increased emphasis on the breath of OTV applications was undertaken to show the need for the program on the basis of the expansion of the nation's capabilities in space.

Resident perspectives on duty hour limits and attributes of their learning environment.

PubMed

Philibert, Ingrid

2014-01-01

Residents are stakeholders in the debate surrounding duty hour restrictions, yet few studies have assessed their perspective on their programs' efforts to comply with them. This paper explores learners' perceptions of the attributes of their programs in relation to duty hour compliance, and looks for evidence whether residents view duty hour limits as important to patient safety. A grounded-theory framework was used to analyze learners' comments about programs' compliance with US duty hour limits. Data were collected by ACGME in 2011, using resident consensus lists of program strengths and opportunities for improvement generated prior to accreditation site visits. The data set for this analysis encompasses 112 core and 69 subspecialty programs where these lists mentioned duty hours. The analysis compared programs where residents viewed duty hour compliance as a strength, and programs where it was identified as an opportunity for improvement. Programs in the first group were characterized by clinical efficiency, responsiveness to problems, and a collegial environment that contributed to residents' ability to meet clinical and learning goals within the restrictions. These attributes were lacking in the second group, and residents also commented on onerous duty hour reporting. Learners did not associate duty hour compliance with patient safety, and the few comments in this area centred almost exclusively on the presence or absence of supervision when junior residents first assumed clinical duties. The findings have practical implications for programs that wish to enhance their learning and patient care environment, and suggest areas for future research.

A Case Study of Measuring Process Risk for Early Insights into Software Safety

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor; Zelkowitz, Marvin V.; Fisher, Karen L.

2011-01-01

In this case study, we examine software safety risk in three flight hardware systems in NASA's Constellation spaceflight program. We applied our Technical and Process Risk Measurement (TPRM) methodology to the Constellation hazard analysis process to quantify the technical and process risks involving software safety in the early design phase of these projects. We analyzed 154 hazard reports and collected metrics to measure the prevalence of software in hazards and the specificity of descriptions of software causes of hazardous conditions. We found that 49-70% of 154 hazardous conditions could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. The application of the TPRM methodology identified process risks in the application of the hazard analysis process itself that may lead to software safety risk.

Ares I-X Range Safety Analyses Overview

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Gowan, John W., Jr.; Thompson, Brian G.; Tarpley, Ashley W.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Patient Safety Executive Walkarounds

PubMed Central

Feitelberg, Steven P

2006-01-01

The KP Patient Safety Executive Walkarounds Program in the KP San Diego Service Area was developed to provide routine opportunities for senior KP leaders, staff, and clinicians to discuss patient safety concerns proactively, working closely with our labor partners to foster a culture of safety that supports our staff and physicians. Throughout the KP San Diego Service Area, the Walkarounds program plays a major part in promoting responsible identification and reporting of patient safety issues. Because each staff member has an equal voice in discussing patient safety concerns, the program enables all employees—union and nonunion alike—to engage directly in discussions about improving patient safety. The KPSC leadership has recognized this program as a major demonstration that the leadership supports patient safety and promotes reporting of safety issues in a “just culture.” PMID:21519438

Patient safety climate profiles across time: Strength and level of safety climate associated with a quality improvement program in Switzerland-A cross-sectional survey study.

PubMed

Mascherek, Anna C; Schwappach, David L B

2017-01-01

Safety Climate has been acknowledged as an unspecific factor influencing patient safety. However, studies rarely provide in-depth analysis of climate data. As a helpful approach, the concept of "climate strength" has been proposed. In the present study we tested the hypotheses that even if safety climate remains stable on mean-level across time, differences might be evident in strength or shape. The data of two hospitals participating in a large national quality improvement program were analysed for differences in climate profiles at two measurement occasions. We analysed differences on mean-level, differences in percent problematic response, agreement within groups, and frequency histograms in two large hospitals in Switzerland at two measurement occasions (2013 and 2015) applying the Safety Climate Survey. In total, survey responses of 1193 individuals were included in the analyses. Overall, small but significant differences on mean-level of safety climate emerged for some subgroups. Also, although agreement was strong at both time-points within groups, tendencies of divergence or consensus were present in both hospitals. Depending on subgroup and analyses chosen, differences were more or less pronounced. The present study illustrated that taking several measures into account and describing safety climate from different perspectives is necessary in order to fully understand differences and trends within groups and to develop interventions addressing the needs of different groups more precisely.

2003 Oregon traffic crash summary

DOT National Transportation Integrated Search

2004-10-01

The Crash Analysis and Reporting Unit compiles data for reported motor vehicle traffic crashes occurring on city streets, county roads and state highways. The data supports various local, county and state traffic safety programs, engineering and plan...

Engineering Analysis of Stresses in Railroad Rails.

DOT National Transportation Integrated Search

1981-10-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

A profile of fatal accidents involving alcohol

DOT National Transportation Integrated Search

1977-09-01

Author's abstract: Accident investigation studies were conducted during 1971-75 in the cities of Boston, Baltimore, Oklahoma City and Albuquerque where Alcohol Safety Action Programs (ASAPs) were operating. Analysis of the four studies, plus newly av...

Bertolette Selected as EHS Champion of Safety | Poster

Cancer.gov

Dan Bertolette has been selected as the most recent NCI at Frederick Champion of Safety, as part of the Champions of Safety Program sponsored by the Environment, Health, and Safety Program (EHS). The goal of the program, which began last year, is to raise awareness and promote a culture of safety by showing NCI at Frederick staff at work in their respective workplaces,

SNTP environmental, safety, and health

NASA Technical Reports Server (NTRS)

Harmon, Charles D.

1993-01-01

Viewgraphs on space nuclear thermal propulsion (SNTP) environmental, safety, and health are presented. Topics covered include: program safety policy; program safety policies; and DEIS public hearing comments.

49 CFR 214.303 - Railroad on-track safety programs, generally.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Railroad on-track safety programs, generally. 214... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.303 Railroad on-track safety programs, generally. (a) Each railroad to which this part applies...

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

78 FR 39587 - Uniform Procedures for State Highway Safety Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 23 CFR Parts 1200... 2127-AL29 Uniform Procedures for State Highway Safety Grant Programs AGENCY: National Highway Traffic... governing the implementation of State highway safety grant programs as amended by the Moving Ahead for...

Assessment of the safety-relevance of pedestrian and bicyclist programs. Volume 1, Conduct and results

DOT National Transportation Integrated Search

1983-04-01

This document (Volume One of a Two Volume Report) describes the development of a paper-and-pencil instrument for assessing the safety relevance of pedestrian and bicyclist safety education programs. The safety relevance of the program is the extent t...

A probabilistic safety analysis of incidents in nuclear research reactors.

PubMed

Lopes, Valdir Maciel; Agostinho Angelo Sordi, Gian Maria; Moralles, Mauricio; Filho, Tufic Madi

2012-06-01

This work aims to evaluate the potential risks of incidents in nuclear research reactors. For its development, two databases of the International Atomic Energy Agency (IAEA) were used: the Research Reactor Data Base (RRDB) and the Incident Report System for Research Reactor (IRSRR). For this study, the probabilistic safety analysis (PSA) was used. To obtain the result of the probability calculations for PSA, the theory and equations in the paper IAEA TECDOC-636 were used. A specific program to analyse the probabilities was developed within the main program, Scilab 5.1.1. for two distributions, Fischer and chi-square, both with the confidence level of 90 %. Using Sordi equations, the maximum admissible doses to compare with the risk limits established by the International Commission on Radiological Protection (ICRP) were obtained. All results achieved with this probability analysis led to the conclusion that the incidents which occurred had radiation doses within the stochastic effects reference interval established by the ICRP-64.

[Development and effect analysis of web-based instruction program to prevent elementary school students from safety accidents].

PubMed

Chung, Eun-Soon; Jeong, Ihn-Sook; Song, Mi-Gyoung

2004-06-01

This study was aimed to develop a WBI(Web Based Instruction) program on safety for 3rd grade elementary school students and to test the effects of it. The WBI program was developed using Macromedia flash MX, Adobe Illustrator 10.0 and Adobe Photoshop 7.0. The web site was http://www.safeschool.co.kr. The effect of it was tested from Mar 24, to Apr 30, 2003. The subjects were 144 students enrolled in the 3rd grade of an elementary school in Gyungju. The experimental group received the WBI program lessons while each control group received textbook-based lessons with visual presenters and maps, 3 times. Data was analyzed with descriptive statistics, and chi2 test, t-test, and repeated measure ANOVA. First, the WBI group reported a longer effect on knowledge and practice of accident prevention than the textbook-based lessons, indicating that the WBI is more effective. Second, the WBI group was better motivated to learn the accident prevention lessons, showing that the WBI is effective. As a result, the WBI group had total longer effects on knowledge, practice and motivation of accident prevention than the textbook-based instruction. We recommend that this WBI program be used in each class to provide more effective safety instruction in elementary schools.

Four Generations of Maintenance Resource Management Programs in the United States: An Analysis of the Past, Present, and Future

NASA Technical Reports Server (NTRS)

Taylor, James C.; Patankar, Manoj S.

2001-01-01

This paper analyzes four generations of Maintenance Resource Management (MRM) programs implemented by aviation maintenance organizations in the United States. Data collected from over ten years of survey research and field observations are used for this analysis; they are presented in a case-study format. The first three generations of MRM programs were episodic efforts to increase safety through teamwork, focus group discussions, and awareness courses, respectively. Now, the fourth generation programs, characterized by a commitment to long-term communication and behavioral changes in maintenance, are set to build on those earlier generations, toward a culture of mutual trust between mechanics, their managers, and regulators.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

NASA-Langley Research Center's Aircraft Condition Analysis and Management System Implementation

NASA Technical Reports Server (NTRS)

Frye, Mark W.; Bailey, Roger M.; Jessup, Artie D.

2004-01-01

This document describes the hardware implementation design and architecture of Aeronautical Radio Incorporated (ARINC)'s Aircraft Condition Analysis and Management System (ACAMS), which was developed at NASA-Langley Research Center (LaRC) for use in its Airborne Research Integrated Experiments System (ARIES) Laboratory. This activity is part of NASA's Aviation Safety Program (AvSP), the Single Aircraft Accident Prevention (SAAP) project to develop safety-enabling technologies for aircraft and airborne systems. The fundamental intent of these technologies is to allow timely intervention or remediation to improve unsafe conditions before they become life threatening.

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... included in the affected rail transit agency's system safety program plan relating to the hazard management... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

23 CFR Appendix B to Part 1200 - HIGHWAY SAFETY PROGRAM COST SUMMARY (HS-217)

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false HIGHWAY SAFETY PROGRAM COST SUMMARY (HS-217) B APPENDIX B TO PART 1200 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR...

23 CFR Appendix B to Part 1200 - Highway Safety Program Cost Summary (HS-217)

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Highway Safety Program Cost Summary (HS-217) B Appendix B to Part 1200 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR...

Directory of Academic Programs in Occupational Safety and Health.

ERIC Educational Resources Information Center

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

Achieving the Proper Balance Between Crew and Public Safety

NASA Technical Reports Server (NTRS)

Gowan, John; Rosati, Paul; Silvestri, Ray; Stahl, Ben; Wilde, Paul

2011-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. Historical examples and lessons learned from both the Space Shuttle and Constellation Programs will be presented. Using these examples as context, the paper will discuss some operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Manned vehicle perspectives from the FAA and Air Force organizations that oversee public safety will also be summarized. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

PubMed

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

Report to the administrator by the NASA Aerospace Safety Advisory Panel on the Skylab program. Volume 2: Program implementation and maturity. [systems management evaluation and design analysis

NASA Technical Reports Server (NTRS)

1973-01-01

Results of the design and manufacturing reviews on the maturity of the Skylab modules are presented along with results of investigations on the scope of the cluster risk assessment efforts. The technical management system and its capability to assess and resolve problems are studied.

Best Practices for Optimizing DoD Contractor Safety and Occupational Health Program Performance

DTIC Science & Technology

2012-12-01

such as Accident Prevention Plan (APP), Activity Hazard Analysis (AHA), Quality Assurance Surveillance Plans (QASP), etc. Contract administration...technology support, medical , and maintenance of equipment and facilities. The DoD Guidebook for the Acquisition of Services, provides acquisition...OSHA regulations and perform in accordance with an applicable accident prevention program that complies with State and Federal requirements. The

Urban transport safety assessment in akure based on corresponding performance indicators

NASA Astrophysics Data System (ADS)

Oye, Adedamola; Aderinlewo, Olufikayo; Croope, Silvana

2013-03-01

The level of safety of the transportation system in Akure, Nigeria was assessed by identifying the associated road safety problems and developing the corresponding safety performance indicators. These indicators were analysed with respect to accidents that occurred within the city from the year 2005 to 2009 based on the corresponding attributable risk measures. The results of the analysis showed the state of existing safety programs in Akure town. Six safety performance indicators were identified namely alcohol and drug use, excessive speeds, protection system (use of seat belts and helmets), use of day time running lights, state of vehicles (passive safety) and road condition. These indicators were used to determine the percentage of injury accidents as follows: 83.33% and 86.36% for years 2005 and 2006 respectively, 81.46% for year 2007 while years 2008 and 2009 had 82.86% and 78.12% injury accidents respectively.

ABL and BAM Friction Analysis Comparison

DOE PAGES

Warner, Kirstin F.; Sandstrom, Mary M.; Brown, Geoffrey W.; ...

2014-12-29

Here, the Integrated Data Collection Analysis (IDCA) program has conducted a proficiency study for Small-Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here is a comparison of the Alleghany Ballistic Laboratory (ABL) friction data and Bundesanstalt fur Materialforschung und -prufung (BAM) friction data for 19 HEM and military standard explosives.

Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Kelly, Dana; Smith, Curtis; Vedros, Kurt; Galyean, William

2009-01-01

This document, Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis, is intended to provide guidelines for the collection and evaluation of risk and reliability-related data. It is aimed at scientists and engineers familiar with risk and reliability methods and provides a hands-on approach to the investigation and application of a variety of risk and reliability data assessment methods, tools, and techniques. This document provides both: A broad perspective on data analysis collection and evaluation issues. A narrow focus on the methods to implement a comprehensive information repository. The topics addressed herein cover the fundamentals of how data and information are to be used in risk and reliability analysis models and their potential role in decision making. Understanding these topics is essential to attaining a risk informed decision making environment that is being sought by NASA requirements and procedures such as 8000.4 (Agency Risk Management Procedural Requirements), NPR 8705.05 (Probabilistic Risk Assessment Procedures for NASA Programs and Projects), and the System Safety requirements of NPR 8715.3 (NASA General Safety Program Requirements).

The Department of Energy Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Felty, James R.

2005-05-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

ASAP Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

2004-01-01

This is the First Quarterly Report for the newly reconstituted Aerospace Safety Advisory Panel (ASAP). The NASA Administrator rechartered the Panel on November 18,2003, to provide an independent, vigilant, and long-term oversight of NASA's safety policies and programs well beyond Return to Flight of the Space Shuttle. The charter was revised to be consistent with the original intent of Congress in enacting the statute establishing ASAP in 1967 to focus on NASA's safety and quality systems, including industrial and systems safety, risk-management and trend analysis, and the management of these activities.The charter also was revised to provide more timely feedback to NASA by requiring quarterly rather than annual reports, and by requiring ASAP to perform special assessments with immediate feedback to NASA. ASAP was positioned to help institutionalize the safety culture of NASA in the post- Stafford-Covey Return to Flight environment.

NCRP Program Area Committee 2: Operational Radiation Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pryor, Kathryn H.; Goldin, Eric M.

2016-02-29

Program Area Committee 2 of the National Council on Radiation Protection and Measurements provides guidance for radiation safety in occupational settings in a variety of industries and activities. The committee completed three reports in recent years covering recommendations for the development and administration of radiation safety programs for smaller educational institutions, requirements for self-assessment programs that improve radiation safety and identify and correct deficiencies, and a comprehensive process for effective investigation of radiological incidents. Ongoing work includes a report on sealed radioactive source controls and oversight of a report on radioactive nanomaterials focusing on gaps within current radiation safety programs.more » Future efforts may deal with operational radiation safety programs in fields such as the safe use of handheld and portable X-Ray fluorescence analyzers, occupational airborne radioactive contamination, unsealed radioactive sources, or industrial accelerators.« less

Interventions to prevent and control food-borne diseases associated with a reduction in traveler's diarrhea in tourists to Jamaica.

PubMed

Ashley, David V M; Walters, Christine; Dockery-Brown, Cheryl; McNab, André; Ashley, Deanna E C

2004-01-01

In 1996 a study found that approximately one in four tourists to Jamaica were affected with traveler's diarrhea (TD) during their stay. That year the Ministry of Health initiated a program for the prevention and control of TD. The aim of this ongoing program was to reduce attack rates of TD from 25% to 12% over a 5-year period by improving the environmental health and food safety standards of hotels. Hotel-based surveillance procedures for TD were implemented in sentinel hotels in Negril and Montego Bay in 1996, Ocho Rios in 1997, and Kingston in 1999. A structured program provided training and technical assistance to nurses, food and beverage staff, and environmental sanitation personnel in the implementation of Hazard Analysis Critical Control Point principles for monitoring food safety standards. The impact of interventions on TD was assessed in a survey of tourists departing from the international airport in Montego Bay in 1997-1998 and from the international airport in Kingston in 1999-2000. The impact of the training and technical assistance program on food safety standards and practices was assessed in hotels in Ocho Rios as of 1998 and in Kingston from 1999. At the end of May 2002, TD incidence rates were 72% lower than in 1996, when the Ministry of Health initiated its program for the prevention and control of TD. Both hotel surveillance data and airport surveillance data suggest that the vast majority of travelers to Kingston and southern regions are not afflicted with TD during their stay. The training and technical assistance program improved compliance to food safety standards over time. Interventions to prevent and control TD in visitors to Jamaica are positively associated with a reduction in TD in the visitor population and improvements in food safety standards and practices in hotels.

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEPARTMENT OF ENERGY 10 CFR Part 851 Worker Safety and Health Program: Safety Conscious Work... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

New Mexico’s comprehensive impaired-driving program : crash data analysis.

DOT National Transportation Integrated Search

2014-03-01

In late 2004, the National Highway Traffic Safety Administration provided funds through a Cooperative Agreement to the New Mexico Department of Transportation to demonstrate a process for implementing a comprehensive State impaired-driving system. NH...

2009 Oregon traffic crash summary

DOT National Transportation Integrated Search

2010-09-01

The Crash Analysis and Reporting Unit compiles data and publishes statistics for reported motor vehicle : traffic crashes per ORS 802.050(2) and 802.220(6). The data supports various local, county and state : traffic safety programs, engineering and ...

2008 Oregon traffic crash summary

DOT National Transportation Integrated Search

2009-09-01

The Crash Analysis and Reporting Unit compiles data and publishes statistics for reported motor vehicle : traffic crashes per ORS 802.050(2) and 802.220(6). The data supports various local, county and state : traffic safety programs, engineering and ...

2010 Oregon traffic crash summary

DOT National Transportation Integrated Search

2011-08-01

The Crash Analysis and Reporting Unit compiles data and publishes statistics for reported motor vehicle : traffic crashes per ORS 802.050(2) and 802.220(6). The data supports various local, county and state : traffic safety programs, engineering and ...

Get the Most from Your Cash Flow.

ERIC Educational Resources Information Center

Bauer, Richard I.

1995-01-01

Provides guidelines for overseeing a school district's cash-flow management program: (1) receipts into cash; (2) types of float; (3) concentration account or controlled-disbursement account; (4) bank-account analysis; and (5) safety. One figure is included. (LMI)

Lidar performance analysis

NASA Technical Reports Server (NTRS)

Spiers, Gary D.

1994-01-01

Section 1 details the theory used to build the lidar model, provides results of using the model to evaluate AEOLUS design instrument designs, and provides snapshots of the visual appearance of the coded model. Appendix A contains a Fortran program to calculate various forms of the refractive index structure function. This program was used to determine the refractive index structure function used in the main lidar simulation code. Appendix B contains a memo on the optimization of the lidar telescope geometry for a line-scan geometry. Appendix C contains the code for the main lidar simulation and brief instruction on running the code. Appendix D contains a Fortran code to calculate the maximum permissible exposure for the eye from the ANSI Z136.1-1992 eye safety standards. Appendix E contains a paper on the eye safety analysis of a space-based coherent lidar presented at the 7th Coherent Laser Radar Applications and Technology Conference, Paris, France, 19-23 July 1993.

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, Mitchell T.; Bunt, R.; Corradini, M.

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affectmore » reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).« less

10 CFR 851.10 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... accordance with: (i) All applicable requirements of this part; and (ii) With the worker safety and health program for that workplace. (b) The written worker safety and health program must describe how the... DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.10 General requirements. (a...

10 CFR 851.10 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... accordance with: (i) All applicable requirements of this part; and (ii) With the worker safety and health program for that workplace. (b) The written worker safety and health program must describe how the... DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.10 General requirements. (a...

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

Progress Report for Student Research: Fire Safety Skills for Mentally Retarded Children.

ERIC Educational Resources Information Center

Hayden, Mary F.; Lefcowitz, M. Jack

A comprehensive fire safety skills program was evaluated with 32 moderately to mildly retarded adolescents. The program used a fire safety program manual and lessons in basic preventive fire skills, fire safety procedures, and fire escape skills. Across-group comparisons indicated differences in performance between males and females. Fire safety…

Occupational Safety and Health Programs in Career Education.

ERIC Educational Resources Information Center

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

78 FR 54510 - New Entrant Safety Assurance Program Operational Test

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

...-0298] New Entrant Safety Assurance Program Operational Test AGENCY: Federal Motor Carrier Safety...) announces an operational test of procedural changes to the New Entrant Safety Assurance Program. The operational test began in July 2013 and will be in effect for up to 12 months. It is applicable to new entrant...

Highway Safety Program Manual: Volume 15: Police Traffic Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 15 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on police traffic services. The purpose and objectives of a police services program are described. Federal authority in the areas of highway safety and policies regarding a police traffic…

Highway Safety Program Manual: Volume 6: Codes and Laws.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

State funding of alcohol safety countermeasure programs

DOT National Transportation Integrated Search

1979-09-01

This study was to analyze current State practices in funding State alcohol highway safety programs. The results were intended to provide guidelines for establishing and improving self-sustaining alcohol safety programs. The literature was reviewed an...

SCANS (Shipping Cask ANalysis System) a microcomputer-based analysis system for shipping cask design review: User`s manual to Version 3a. Volume 1, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mok, G.C.; Thomas, G.R.; Gerhard, M.A.

SCANS (Shipping Cask ANalysis System) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent fuel shipping casks. SCANS is an easy-to-use system that calculates the global response to impact loads, pressure loads and thermal conditions, providing reviewers with an independent check on analyses submitted by licensees. SCANS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens thatmore » contain descriptive data requests. Analysis options are based on regulatory cases described in the Code of Federal Regulations 10 CFR 71 and Regulatory Guides published by the US Nuclear Regulatory Commission in 1977 and 1978.« less

Behind the wheel: community consultation informs adaptation of safe-transport program for older drivers.

PubMed

Coxon, Kristy; Keay, Lisa

2015-12-09

Safe-transport is important to well-being in later life but balancing safety and independence for older drivers can be challenging. While self-regulation is a promising tool to promote road safety, more research is required to optimise programs. Qualitative research was used to inform the choice and adaptation of a safe-transport education program for older drivers. Three focus groups were conducted with older drivers living in northwest Sydney to explore four key areas related to driving in later life including aged-based licensing, stopping or limiting driving, barriers to driving cessation and alternative modes of transportation. Data were analysed using content analysis. Four categories emerged from the data; bad press for older drivers, COMPETENCE not age, call for fairness in licensing regulations, and hanging up the keys: It's complicated! Two key issues being (1) older drivers wanted to drive for as long as possible but (2) were not prepared for driving cessation; guided the choice and adaption of the Knowledge Enhances Your Safety (KEYS) program. This program was adapted for the Australian context and focus group findings raised the need for practical solutions, including transport alternatives, to be added. Targeted messages were developed from the data using the Precaution Adoption Process Model (PAPM), allowing the education to be tailored to the individual's stage of behaviour change. Adapting our program based on insights gained from community consultation should ensure the program is sensitive to the needs, skills and preferences of older drivers.

Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

NASA Technical Reports Server (NTRS)

Miller, W. S.

1974-01-01

A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

Evaluation of the Scottsdale Loop 101 automated speed enforcement demonstration program.

PubMed

Shin, Kangwon; Washington, Simon P; van Schalkwyk, Ida

2009-05-01

Speeding is recognized as a major contributing factor in traffic crashes. In order to reduce speed-related crashes, the city of Scottsdale, Arizona implemented the first fixed-camera photo speed enforcement program (SEP) on a limited access freeway in the US. The 9-month demonstration program spanning from January 2006 to October 2006 was implemented on a 6.5 mile urban freeway segment of Arizona State Route 101 running through Scottsdale. This paper presents the results of a comprehensive analysis of the impact of the SEP on speeding behavior, crashes, and the economic impact of crashes. The impact on speeding behavior was estimated using generalized least square estimation, in which the observed speeds and the speeding frequencies during the program period were compared to those during other periods. The impact of the SEP on crashes was estimated using 3 evaluation methods: a before-and-after (BA) analysis using a comparison group, a BA analysis with traffic flow correction, and an empirical Bayes BA analysis with time-variant safety. The analysis results reveal that speeding detection frequencies (speeds> or =76 mph) increased by a factor of 10.5 after the SEP was (temporarily) terminated. Average speeds in the enforcement zone were reduced by about 9 mph when the SEP was implemented, after accounting for the influence of traffic flow. All crash types were reduced except rear-end crashes, although the estimated magnitude of impact varies across estimation methods (and their corresponding assumptions). When considering Arizona-specific crash related injury costs, the SEP is estimated to yield about $17 million in annual safety benefits.

Structural Analysis of Kufasat Using Ansys Program

NASA Astrophysics Data System (ADS)

Al-Maliky, Firas T.; AlBermani, Mohamed J.

2018-03-01

The current work focuses on vibration and modal analysis of KufaSat structure using ANSYS 16 program. Three types of Aluminum alloys (5052-H32, 6061-T6 and 7075-T6) were selected for investigation of the structure under design loads. Finite element analysis (FEA) in design static load of 51 g was performed. The natural frequencies for five modes were estimated using modal analysis. In order to ensure that KufaSat could withstand with various conditions during launch, the Margin of safety was calculated. The results of deformation and Von Mises stress for linear buckling analysis were also performed. The comparison of data was done to select the optimum material for KufaSat structures.

Generating Customized Verifiers for Automatically Generated Code

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2008-01-01

Program verification using Hoare-style techniques requires many logical annotations. We have previously developed a generic annotation inference algorithm that weaves in all annotations required to certify safety properties for automatically generated code. It uses patterns to capture generator- and property-specific code idioms and property-specific meta-program fragments to construct the annotations. The algorithm is customized by specifying the code patterns and integrating them with the meta-program fragments for annotation construction. However, this is difficult since it involves tedious and error-prone low-level term manipulations. Here, we describe an annotation schema compiler that largely automates this customization task using generative techniques. It takes a collection of high-level declarative annotation schemas tailored towards a specific code generator and safety property, and generates all customized analysis functions and glue code required for interfacing with the generic algorithm core, thus effectively creating a customized annotation inference algorithm. The compiler raises the level of abstraction and simplifies schema development and maintenance. It also takes care of some more routine aspects of formulating patterns and schemas, in particular handling of irrelevant program fragments and irrelevant variance in the program structure, which reduces the size, complexity, and number of different patterns and annotation schemas that are required. The improvements described here make it easier and faster to customize the system to a new safety property or a new generator, and we demonstrate this by customizing it to certify frame safety of space flight navigation code that was automatically generated from Simulink models by MathWorks' Real-Time Workshop.

Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.

This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I&C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I&C system upgrades of present-day nuclear power plants, as well as I&C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current,more » analog-based I&C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in 1998, and should reflect any new qualification concerns, from the European perspective, with regard to the use of microprocessor-based safety systems in power plants.« less

Systems cost/performance analysis (study 2.3). Volume 2: Systems cost/performance model. [unmanned automated payload programs and program planning

NASA Technical Reports Server (NTRS)

Campbell, B. H.

1974-01-01

A methodology which was developed for balanced designing of spacecraft subsystems and interrelates cost, performance, safety, and schedule considerations was refined. The methodology consists of a two-step process: the first step is one of selecting all hardware designs which satisfy the given performance and safety requirements, the second step is one of estimating the cost and schedule required to design, build, and operate each spacecraft design. Using this methodology to develop a systems cost/performance model allows the user of such a model to establish specific designs and the related costs and schedule. The user is able to determine the sensitivity of design, costs, and schedules to changes in requirements. The resulting systems cost performance model is described and implemented as a digital computer program.

Why system safety programs can fail

NASA Technical Reports Server (NTRS)

Hammer, W.

1971-01-01

Factors that cause system safety programs to fail are discussed from the viewpoint that in general these programs have not achieved their intended aims. The one item which is considered to contribute most to failure of a system safety program is a poor statement of work which consists of ambiguity, lack of clear definition, use of obsolete requirements, and pure typographical errors. It is pointed out that unless safety requirements are stated clearly, and where they are readily apparent as firm requirements, some of them will be overlooked by designers and contractors. The lack of clarity is stated as being a major contributing factor in system safety program failure and usually evidenced in: (1) lack of clear requirements by the procuring activity, (2) lack of clear understanding of system safety by other managers, and (3) lack of clear methodology to be employed by system safety engineers.

The Interagency Nuclear Safety Review Panel's Galileo safety evaluation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.C.; Gray, L.B.; Huff, D.A.

The safety evaluation report (SER) for Galileo was prepared by the Interagency Nuclear Safety Review Panel (INSRP) coordinators in accordance with Presidential directive/National Security Council memorandum 25. The INSRP consists of three coordinators appointed by their respective agencies, the Department of Defense, the Department of Energy (DOE), and the National Aeronautics and Space Administration (NASA). These individuals are independent of the program being evaluated and depend on independent experts drawn from the national technical community to serve on the five INSRP subpanels. The Galileo SER is based on input provided by the NASA Galileo Program Office, review and assessment ofmore » the final safety analysis report prepared by the Office of Special Applications of the DOE under a memorandum of understanding between NASA and the DOE, as well as other related data and analyses. The SER was prepared for use by the agencies and the Office of Science and Technology Policy, Executive Office of the Present for use in their launch decision-making process. Although more than 20 nuclear-powered space missions have been previously reviewed via the INSRP process, the Galileo review constituted the first review of a nuclear power source associated with launch aboard the Space Transportation System.« less

Program evaluation of FHWA pedestrian and bicycle safety activities.

DOT National Transportation Integrated Search

2011-03-01

"Introduction : FHWAs Office of Highway Safety (HSA) initiated a program evaluation by Booz Allen Hamilton to assess the overall effectiveness of the Agencys Pedestrian and Bicycle Safety Program. The evaluation covers pedestrian and bicycle sa...

Background report guidance for roadway safety data to support the highway safety improvement program.

DOT National Transportation Integrated Search

2011-06-01

"Quality data are the foundation for making important decisions regarding the design, operation, and safety of : roadways. The Highway Safety Improvement Program (HSIP) provides information on how safety data should be : used. However, there are no d...

How to make the most of failure mode and effect analysis.

PubMed

Stalhandske, Erik; DeRosier, Joseph; Patail, Bryanne; Gosbee, John

2003-01-01

Current accreditation standards issued by the Joint Commission for the Accreditation of Healthcare Organizations (JCAHO) require hospitals to carry out a proactive risk assessment on at least 1 high-risk activity each year for each accredited program. Because hospital risk managers and patient safety managers generally do not have the knowledge or level of comfort for conducting a proactive risk assessment, they will appreciate the expertise offered by biomedical equipment technicians (BMETs), occupational safety and health professionals, and others. The skills that have been developed by BMETs and others while conducting job safety analyses or failure mode effect analysis can now be applied to a health care proactive analysis. This article touches on the Health Care Failure Mode and Effect Analysis (HFMEA) model that the Department of Veterans Affairs (VA) National Center for Patient Safety developed for proactive risk assessment within the health care community. The goal of this article is to enlighten BMETs and others on the growth of proactive risk assessment within health care and also on the support documents and materials produced by the VA. For additional information on HFMEA, visit the VA website at www.patientsafety.gov/HFMEA.html.

Safety, reliability, maintainability and quality provisions for the Space Shuttle program

NASA Technical Reports Server (NTRS)

1990-01-01

This publication establishes common safety, reliability, maintainability and quality provisions for the Space Shuttle Program. NASA Centers shall use this publication both as the basis for negotiating safety, reliability, maintainability and quality requirements with Shuttle Program contractors and as the guideline for conduct of program safety, reliability, maintainability and quality activities at the Centers. Centers shall assure that applicable provisions of the publication are imposed in lower tier contracts. Centers shall give due regard to other Space Shuttle Program planning in order to provide an integrated total Space Shuttle Program activity. In the implementation of safety, reliability, maintainability and quality activities, consideration shall be given to hardware complexity, supplier experience, state of hardware development, unit cost, and hardware use. The approach and methods for contractor implementation shall be described in the contractors safety, reliability, maintainability and quality plans. This publication incorporates provisions of NASA documents: NHB 1700.1 'NASA Safety Manual, Vol. 1'; NHB 5300.4(IA), 'Reliability Program Provisions for Aeronautical and Space System Contractors'; and NHB 5300.4(1B), 'Quality Program Provisions for Aeronautical and Space System Contractors'. It has been tailored from the above documents based on experience in other programs. It is intended that this publication be reviewed and revised, as appropriate, to reflect new experience and to assure continuing viability.

Highway Safety Program Manual: Volume 16: Debris Hazard Control and Cleanup.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 16 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on debris hazard control and cleanup. The purpose and objectives of such a program are outlined. Federal authority in the area of highway safety and policies regarding a debris control…

Curriculum and Evaluation Guide for Safety Education Programs. Research and Evaluation Report Series No. 40.00.

ERIC Educational Resources Information Center

Lowry, Carlee S.

Designed to assist Bureau of Indian Affairs school officials in the identification of safety education program needs, this evaluation guide focuses upon the basic operational components in a safety education program. The means for establishing an evaluation design for safety education are presented via a flexible model appropriate for most…

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... workers at multi-contractor workplaces. (3) The worker safety and health program must describe how the... may be performed at a covered workplace unless an approved worker safety and health program is in... 10 Energy 4 2010-01-01 2010-01-01 false Development and approval of worker safety and health...

49 CFR 501.8 - Delegations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Applied Research. The Senior Associate Administrator for Vehicle Safety exercises executive direction with... Administrator for Advanced Research and Analysis; the Associate Administrator for Administration; the Associate... research and development programs and projects necessary to support the purposes of Chapters 301, 323, 325...

23 CFR 1205.2 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HIGHWAY SAFETY PROGRAMS; DETERMINATIONS OF EFFECTIVENESS § 1205.2 Purpose. The purpose of this part is to establish national highway safety priorities and establish program areas within which highway safety programs developed by the states would be eligible to receive Federal funding. ...

23 CFR 1205.2 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HIGHWAY SAFETY PROGRAMS; DETERMINATIONS OF EFFECTIVENESS § 1205.2 Purpose. The purpose of this part is to establish national highway safety priorities and establish program areas within which highway safety programs developed by the states would be eligible to receive Federal funding. ...

National child safety seat distribution program evaluation

DOT National Transportation Integrated Search

1999-03-01

The National Child Safety Seat Distribution Program (NCSS) was a multi-year, multi-phase program intended to distribute $8 million in child safety seats to low-income and special needs children in all fifty states. Non-profit organizations that recei...

Primer on the Highway Safety Improvement Program (HSIP)

DOT National Transportation Integrated Search

2014-09-16

The Highway Safety Improvement Program (HSIP) is a core Federal-aid program for State Departments of Transportation (State DOTs) administered by the Federal Highway Administration (FHWA). This is a major source of funding for safety projects on the n...

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

MedlinePlus

... Information and Adverse Event Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share ... use. [Posted 06/01/2018] More What's New FDA Approved Safety Information DailyMed (National Library of Medicine) ...

Interface design of VSOP'94 computer code for safety analysis

NASA Astrophysics Data System (ADS)

Natsir, Khairina; Yazid, Putranto Ilham; Andiwijayakusuma, D.; Wahanani, Nursinta Adi

2014-09-01

Today, most software applications, also in the nuclear field, come with a graphical user interface. VSOP'94 (Very Superior Old Program), was designed to simplify the process of performing reactor simulation. VSOP is a integrated code system to simulate the life history of a nuclear reactor that is devoted in education and research. One advantage of VSOP program is its ability to calculate the neutron spectrum estimation, fuel cycle, 2-D diffusion, resonance integral, estimation of reactors fuel costs, and integrated thermal hydraulics. VSOP also can be used to comparative studies and simulation of reactor safety. However, existing VSOP is a conventional program, which was developed using Fortran 65 and have several problems in using it, for example, it is only operated on Dec Alpha mainframe platforms and provide text-based output, difficult to use, especially in data preparation and interpretation of results. We develop a GUI-VSOP, which is an interface program to facilitate the preparation of data, run the VSOP code and read the results in a more user friendly way and useable on the Personal 'Computer (PC). Modifications include the development of interfaces on preprocessing, processing and postprocessing. GUI-based interface for preprocessing aims to provide a convenience way in preparing data. Processing interface is intended to provide convenience in configuring input files and libraries and do compiling VSOP code. Postprocessing interface designed to visualized the VSOP output in table and graphic forms. GUI-VSOP expected to be useful to simplify and speed up the process and analysis of safety aspects.

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

PubMed

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Patient safety training in pediatric emergency medicine: a national survey of program directors.

PubMed

Wolff, Margaret; Macias, Charles G; Garcia, Estevan; Stankovic, Curt

2014-07-01

The Accreditation Council for Graduate Medical Education requires training in patient safety and medical errors but does not provide specification for content or methods. Pediatric emergency medicine (EM) fellowship directors were surveyed to characterize current training of pediatric EM fellows in patient safety and to determine the need for additional training. From June 2013 to August 2013, pediatric EM fellowship directors were surveyed via e-mail. Of the 71 eligible survey respondents, 57 (80.3%) completed surveys. A formal curriculum was present in 24.6% of programs, with a median of 6 hours (range = 1 to 18 hours) dedicated to the curriculum. One program evaluated the efficacy of the curriculum. Nearly 91% of respondents without formal programs identified lack of local faculty expertise or interest as the primary barrier to implementing patient safety curricula. Of programs without formal curricula, 93.6% included at least one component of patient safety training in their fellowship programs. The majority of respondents would implement a standardized patient safety curriculum for pediatric EM if one was available. Despite the importance of patient safety training and requirements to train pediatric EM fellows in patient safety and medical errors, there is a lack of formal curriculum and local faculty expertise. The majority of programs have introduced components of patient safety training and desire a standardized curriculum. © 2014 by the Society for Academic Emergency Medicine.

Highway Safety Program Manual: Volume 11: Emergency Medical Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 11 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on emergency medical services. The purpose of the program, Federal authority in the area of medical services, and policies related to an emergency medical services (EMS) program are…

Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

Effect of Smaller Left Ventricular Capture Threshold Safety Margins to Improve Device Longevity in Recipients of Cardiac Resynchronization-Defibrillation Therapy.

PubMed

Steinhaus, Daniel A; Waks, Jonathan W; Collins, Robert; Kleckner, Karen; Kramer, Daniel B; Zimetbaum, Peter J

2015-07-01

Device longevity in cardiac resynchronization therapy (CRT) is affected by the pacing capture threshold (PCT) and programmed pacing amplitude of the left ventricular (LV) pacing lead. The aims of this study were to evaluate the stability of LV pacing thresholds in a nationwide sample of CRT defibrillator recipients and to determine potential longevity improvements associated with a decrease in the LV safety margin while maintaining effective delivery of CRT. CRT defibrillator patients in the Medtronic CareLink database were eligible for inclusion. LV PCT stability was evaluated using ≥2 measurements over a 14-day period. Separately, a random sample of 7,250 patients with programmed right atrial and right ventricular amplitudes ≤2.5 V, LV thresholds ≤ 2.5 V, and LV pacing ≥90% were evaluated to estimate theoretical battery longevity improvement using LV safety margins of 0.5 and 1.5 V. Threshold stability analysis in 43,256 patients demonstrated LV PCT stability of <0.5 V in 77% of patients and <1 V in 95%. Device longevity analysis showed that the use of a 0.5-V safety margin increased average battery longevity by 0.62 years (95% confidence interval 0.61 to 0.63) compared with a safety margin of 1.5 V. Patients with LV PCTs >1 V had the greatest increases in battery life (mean increase 0.86 years, 95% confidence interval 0.85 to 0.87). In conclusion, nearly all CRT defibrillator patients had LV PCT stability <1.0 V. Decreasing the LV safety margin from 1.5 to 0.5 V provided consistent delivery of CRT for most patients and significantly improved battery longevity. Copyright © 2015 Elsevier Inc. All rights reserved.

KSC-03pd0837

NASA Image and Video Library

2003-03-26

KENNEDY SPACE CENTER, FLA. - William Higgins, chief of Shuttle Processing Safety and Mission Assurance Division at KSC, talks to the Columbia Accident Investigation Board during its third public hearing, held in Cape Canaveral, Fla. Over the course of two days, the Board's chairman, retired Navy Admiral Harold W. "Hal" Gehman Jr., and other board members would hear from experts discussing the role of the Kennedy Space Center in the Shuttle Program, Shuttle Safety and Debris Collection, Layout and Analysis and Forensic Metallurgy.

KSC-03PD-0837

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. - William Higgins, chief of Shuttle Processing Safety and Mission Assurance Division at KSC, talks to the Columbia Accident Investigation Board during its third public hearing, held in Cape Canaveral, Fla. Over the course of two days, the Board's chairman, retired Navy Admiral Harold W. 'Hal' Gehman Jr., and other board members would hear from experts discussing the role of the Kennedy Space Center in the Shuttle Program, Shuttle Safety and Debris Collection, Layout and Analysis and Forensic Metallurgy.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2005-01-01

This is a listing of recent unclassified RTO technical publications for January 1, 2005 through March 31, 2005 processed by the NASA Center for AeroSpace Center available on the NASA Aeronautics and Space Database. Contents include 1) Electronic Information Management; 2) Decision Support to Combined Joint Task Force and Component Commanders; 3) RTO Technical Publications : A Quarterly Listing (December 2004); 4) The Role of Humans in Intelligent and Automated Systems.

Patient safety climate profiles across time: Strength and level of safety climate associated with a quality improvement program in Switzerland—A cross-sectional survey study

PubMed Central

Mascherek, Anna C.

2017-01-01

Safety Climate has been acknowledged as an unspecific factor influencing patient safety. However, studies rarely provide in-depth analysis of climate data. As a helpful approach, the concept of “climate strength” has been proposed. In the present study we tested the hypotheses that even if safety climate remains stable on mean-level across time, differences might be evident in strength or shape. The data of two hospitals participating in a large national quality improvement program were analysed for differences in climate profiles at two measurement occasions. We analysed differences on mean-level, differences in percent problematic response, agreement within groups, and frequency histograms in two large hospitals in Switzerland at two measurement occasions (2013 and 2015) applying the Safety Climate Survey. In total, survey responses of 1193 individuals were included in the analyses. Overall, small but significant differences on mean-level of safety climate emerged for some subgroups. Also, although agreement was strong at both time-points within groups, tendencies of divergence or consensus were present in both hospitals. Depending on subgroup and analyses chosen, differences were more or less pronounced. The present study illustrated that taking several measures into account and describing safety climate from different perspectives is necessary in order to fully understand differences and trends within groups and to develop interventions addressing the needs of different groups more precisely. PMID:28753633

Organizational safety culture and medical error reporting by Israeli nurses.

PubMed

Kagan, Ilya; Barnoy, Sivia

2013-09-01

To investigate the association between patient safety culture (PSC) and the incidence and reporting rate of medical errors by Israeli nurses. Self-administered structured questionnaires were distributed to a convenience sample of 247 registered nurses enrolled in training programs at Tel Aviv University (response rate = 91%). The questionnaire's three sections examined the incidence of medication mistakes in clinical practice, the reporting rate for these errors, and the participants' views and perceptions of the safety culture in their workplace at three levels (organizational, departmental, and individual performance). Pearson correlation coefficients, t tests, and multiple regression analysis were used to analyze the data. Most nurses encountered medical errors from a daily to a weekly basis. Six percent of the sample never reported their own errors, while half reported their own errors "rarely or sometimes." The level of PSC was positively and significantly correlated with the error reporting rate. PSC, place of birth, error incidence, and not having an academic nursing degree were significant predictors of error reporting, together explaining 28% of variance. This study confirms the influence of an organizational safety climate on readiness to report errors. Senior healthcare executives and managers can make a major impact on safety culture development by creating and promoting a vision and strategy for quality and safety and fostering their employees' motivation to implement improvement programs at the departmental and individual level. A positive, carefully designed organizational safety culture can encourage error reporting by staff and so improve patient safety. © 2013 Sigma Theta Tau International.

An interactive distance solution for stroke rehabilitation in the home setting - A feasibility study.

PubMed

Palmcrantz, Susanne; Borg, Jörgen; Sommerfeld, Disa; Plantin, Jeanette; Wall, Anneli; Ehn, Maria; Sjölinder, Marie; Boman, Inga-Lill

2017-09-01

In this study an interactive distance solution (called the DISKO tool) was developed to enable home-based motor training after stroke. The overall aim was to explore the feasibility and safety of using the DISKO-tool, customized for interactive stroke rehabilitation in the home setting, in different rehabilitation phases after stroke. Fifteen patients in three different stages in the continuum of rehabilitation after stroke participated in a home-based training program using the DISKO-tool. The program included 15 training sessions with recurrent follow-ups by the integrated application for video communication with a physiotherapist. Safety and feasibility were assessed from patients, physiotherapists, and a technician using logbooks, interviews, and a questionnaire. Qualitative content analysis and descriptive statistics were used in the analysis. Fourteen out of 15 patients finalized the training period with a mean of 19.5 minutes spent on training at each session. The DISKO-tool was found to be useful and safe by patients and physiotherapists. This study demonstrates the feasibility and safety of the DISKO-tool and provides guidance in further development and testing of interactive distance technology for home rehabilitation, to be used by health care professionals and patients in different phases of rehabilitation after stroke.

Perceptions of medical graduates and their workplace supervisors towards a medical school clinical audit program.

PubMed

Davis, Stephanie; O'Ferrall, Ilse; Hoare, Samuel; Caroline, Bulsara; Mak, Donna B

2017-07-07

This study explores how medical graduates and their workplace supervisors perceive the value of a structured clinical audit program (CAP) undertaken during medical school. Medical students at the University of Notre Dame Fremantle complete a structured clinical audit program in their final year of medical school.  Semi-structured interviews were conducted with 12 Notre Dame graduates (who had all completed the CAP), and seven workplace supervisors (quality and safety staff and clinical supervisors).  Purposeful sampling was used to recruit participants and data were analysed using thematic analysis. Both graduates and workplace supervisors perceived the CAP to be valuable. A major theme was that the CAP made a contribution to individual graduate's medical practice, including improved knowledge in some areas of patient care as well as awareness of healthcare systems issues and preparedness to undertake scientifically rigorous quality improvement activities. Graduates perceived that as a result of the CAP, they were confident in undertaking a clinical audit after graduation.  Workplace supervisors perceived the value of the CAP beyond an educational experience and felt that the audits undertaken by students improved quality and safety of patient care. It is vital that health professionals, including medical graduates, be able to carry out quality and safety activities in the workplace. This study provides evidence that completing a structured clinical audit during medical school prepares graduates to undertake quality and safety activities upon workplace entry. Other health professional faculties may be interested in incorporating a similar program in their curricula.

Patient safety principles in family medicine residency accreditation standards and curriculum objectives

PubMed Central

Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

2016-01-01

Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

APMS: An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Lynch, Robert E.; Connors, Mary M. (Technical Monitor)

1997-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

The Aviation Performance Measuring System (APMS): An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Connor, Mary M. (Technical Monitor)

1998-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data, The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS offers to the air transport community an open, voluntary standard for flight-data-analysis software; a standard that will help to ensure suitable functionality and data interchangeability among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs-of aircrews in mind. APMS tools must serve the needs of the government and air carriers, as well as aircrews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but also through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the aircrew.

APMS: An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C. (Technical Monitor)

1997-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions . APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

APMS: An Integrated Set of Tools for Measuring Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Reynard, William D. (Technical Monitor)

1996-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

Analysis of alternatives for immobilized low activity waste disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burbank, D.A.

This report presents a study of alternative disposal system architectures and implementation strategies to provide onsite near-surface disposal capacity to receive the immobilized low-activity waste produced by the private vendors. The analysis shows that a flexible unit strategy that provides a suite of design solutions tailored to the characteristics of the immobilized low-activity waste will provide a disposal system that best meets the program goals of reducing the environmental, health, and safety impacts; meeting the schedule milestones; and minimizing the life-cycle cost of the program.

The Range Safety Debris Catalog Analysis in Preparation for the Pad Abort One Flight Test

NASA Technical Reports Server (NTRS)

Kutty, Prasad M.; Pratt, William D.

2010-01-01

The Pad Abort One flight test of the Orion Abort Flight Test Program is currently under development with the goal of demonstrating the capability of the Launch Abort System. In the event of a launch failure, this system will propel the Crew Exploration Vehicle to safety. An essential component of this flight test is range safety, which ensures the security of range assets and personnel. A debris catalog analysis was done as part of a range safety data package delivered to the White Sands Missile Range in New Mexico where the test will be conducted. The analysis discusses the consequences of an overpressurization of the Abort Motor. The resulting structural failure was assumed to create a debris field of vehicle fragments that could potentially pose a hazard to the range. A statistical model was used to assemble the debris catalog of potential propellant fragments. Then, a thermodynamic, energy balance model was applied to the system in order to determine the imparted velocity to these propellant fragments. This analysis was conducted at four points along the flight trajectory to better understand the failure consequences over the entire flight. The methods used to perform this analysis are outlined in detail and the corresponding results are presented and discussed.

Meta-analysis of food safety training on hand hygiene knowledge and attitudes among food handlers.

PubMed

Soon, Jan Mei; Baines, Richard; Seaman, Phillip

2012-04-01

Research has shown that traditional food safety training programs and strategies to promote hand hygiene increases knowledge of the subject. However, very few studies have been conducted to evaluate the impact of food safety training on food handlers' attitudes about good hand hygiene practices. The objective of this meta-analytical study was to assess the extent to which food safety training or intervention strategies increased knowledge of and attitudes about hand hygiene. A systematic review of food safety training articles was conducted. Additional studies were identified from abstracts from food safety conferences and food science education conferences. Search terms included combinations of "food safety," "food hygiene," "training," "education," "hand washing," "hand hygiene," "knowledge," "attitudes," "practices," "behavior," and "food handlers." Only before- and after-training approaches and cohort studies with training (intervention group) and without training (control group) in hand hygiene knowledge and including attitudes in food handlers were evaluated. All pooled analyses were based on a random effects model. Meta-analysis values for nine food safety training and intervention studies on hand hygiene knowledge among food handlers were significantly higher than those of the control (without training), with an effect size (Hedges' g) of 1.284 (95% confidence interval [CI] ∼ 0.830 to 1.738). Meta-analysis of five food safety training and intervention studies in which hand hygiene attitudes and self-reported practices were monitored produced a summary effect size of 0.683 (95% CI ∼ 0.523 to 0.843). Food safety training increased knowledge and improved attitudes about hand hygiene practices. Refresher training and long-term reinforcement of good food handling behaviors may also be beneficial for sustaining good hand washing practices.

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2010 CFR

2010-04-01

...-related deaths, injuries and accidents; (j) Impaired driver initiatives; (k) Child safety seat programs... travel on IRRs, such as guardrail construction and traffic markings; (f) Development of a safety management system; (g) Education and outreach highway safety programs, such as use of child safety seats...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Program structure. 924.7 Section 924.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational...

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Program structure. 924.7 Section 924.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational...

Development and evaluation of Virginia's highway safety corridor program.

DOT National Transportation Integrated Search

2006-01-01

On July 1, 2003, legislation went into effect that established a highway safety corridor (HSC) program for Virginia. The intent of the HSC program is to address safety concerns through a combination of law enforcement, education, and engineering coun...

Risk Informed Margins Management as part of Risk Informed Safety Margin Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith

2014-06-01

The ability to better characterize and quantify safety margin is important to improved decision making about Light Water Reactor (LWR) design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plantmore » safety and performance will become known. To support decision making related to economics, readability, and safety, the Risk Informed Safety Margin Characterization (RISMC) Pathway provides methods and tools that enable mitigation options known as risk informed margins management (RIMM) strategies.« less

Aviation Safety Reporting System: Process and Procedures

NASA Technical Reports Server (NTRS)

Connell, Linda J.

1997-01-01

The Aviation Safety Reporting System (ASRS) was established in 1976 under an agreement between the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA). This cooperative safety program invites pilots, air traffic controllers, flight attendants, maintenance personnel, and others to voluntarily report to NASA any aviation incident or safety hazard. The FAA provides most of the program funding. NASA administers the program, sets its policies in consultation with the FAA and aviation community, and receives the reports submitted to the program. The FAA offers those who use the ASRS program two important reporting guarantees: confidentiality and limited immunity. Reports sent to ASRS are held in strict confidence. More than 350,000 reports have been submitted since the program's beginning without a single reporter's identity being revealed. ASRS removes all personal names and other potentially identifying information before entering reports into its database. This system is a very successful, proof-of-concept for gathering safety data in order to provide timely information about safety issues. The ASRS information is crucial to aviation safety efforts both nationally and internationally. It can be utilized as the first step in safety by providing the direction and content to informed policies, procedures, and research, especially human factors. The ASRS process and procedures will be presented as one model of safety reporting feedback systems.

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the Atmospheric Environment Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This study analyzed aircraft incidents in the NASA Aviation Safety Reporting System (ASRS) that apply to two of the three technical challenges (TCs) in NASA's Aviation Safety Program's Atmospheric Environment Safety Technology Project. The aircraft incidents are related to airframe icing and atmospheric hazards TCs. The study reviewed incidents that listed their primary problem as weather or environment-nonweather between 1994 and 2011 for aircraft defined by Federal Aviation Regulations (FAR) Parts 121, 135, and 91. The study investigated the phases of flight, a variety of anomalies, flight conditions, and incidents by FAR part, along with other categories. The first part of the analysis focused on airframe-icing-related incidents and found 275 incidents out of 3526 weather-related incidents over the 18-yr period. The second portion of the study focused on atmospheric hazards and found 4647 incidents over the same time period. Atmospheric hazards-related incidents included a range of conditions from clear air turbulence and wake vortex, to controlled flight toward terrain, ground encounters, and incursions.

Vitamin G: effects of green space on health, well-being, and social safety

PubMed Central

Groenewegen, Peter P; van den Berg, Agnes E; de Vries, Sjerp; Verheij, Robert A

2006-01-01

Background Looking out on and being in the green elements of the landscape around us seem to affect health, well-being and feelings of social safety. This article discusses the design of a research program on the effects of green space in the living environment on health, well-being and social safety. Methods/design The program consists of three projects at three different scales: at a macro scale using data on the Netherlands as a whole, at an intermediate scale looking into the specific effect of green space in the urban environment, and at micro scale investigating the effects of allotment gardens. The projects are observational studies, combining existing data on land use and health interview survey data, and collecting new data through questionnaires and interviews. Multilevel analysis and GIS techniques will be used to analyze the data. Discussion Previous (experimental) research in environmental psychology has shown that a natural environment has a positive effect on well-being through restoration of stress and attentional fatigue. Descriptive epidemiological research has shown a positive relationship between the amount of green space in the living environment and physical and mental health and longevity. The program has three aims. First, to document the relationship between the amount and type of green space in people's living environment and their health, well-being, and feelings of safety. Second, to investigate the mechanisms behind this relationship. Mechanisms relate to exposure (leading to stress reduction and attention restoration), healthy behavior and social integration, and selection. Third, to translate the results into policy on the crossroads of spatial planning, public health, and safety. Strong points of our program are: we study several interrelated dependent variables, in different ordinary settings (as opposed to experimental or extreme settings), focusing on different target groups, using appropriate multilevel methods. PMID:16759375

A longitudinal study of clinical peer review's impact on quality and safety in U.S. hospitals.

PubMed

Edwards, Marc T

2013-01-01

Clinical peer review is the dominant method of event analysis in U.S. hospitals. It is pivotal to medical staff efforts to improve quality and safety, yet the quality assurance process model that has prevailed for the past 30 years evokes fear and is fundamentally antithetical to a culture of safety. Two prior national studies characterized a quality improvement model that corrects this dysfunction but failed to demonstrate progress toward its adoption despite a high rate of program change between 2007 and 2009. This study's online survey of 470 organizations participating in either of the prior studies further assessed relationships between clinical peer review program factors, including the degree of conformance to the quality improvement model (the QI model score), and subjectively measured program impact variables. Among the 300 hospitals (64%) that responded, the median QI model score was only 60 on a 100-point scale. Scores increased somewhat for the 2007 cohort (mean pair-wise difference of 5.9 [2-10]), but not for the 2009 cohort. The QI model is expanded as the result of the finding that self-reporting of adverse events, near misses, and hazardous conditions--an essential practice in high-reliability organizations--is no longer rare in hospitals. Self-reporting and the quality of case review are additional multivariate predictors of the perceived ongoing impact of clinical peer review on quality and safety, medical staff perceptions of the program, and medical staff engagement in quality and safety initiatives. Hospital leaders and trustees who seek to improve patient outcomes should facilitate the adoption of this best practice model for clinical peer review.

Near-miss incident management in the chemical process industry.

PubMed

Phimister, James R; Oktem, Ulku; Kleindorfer, Paul R; Kunreuther, Howard

2003-06-01

This article provides a systematic framework for the analysis and improvement of near-miss programs in the chemical process industries. Near-miss programs improve corporate environmental, health, and safety (EHS) performance through the identification and management of near misses. Based on more than 100 interviews at 20 chemical and pharmaceutical facilities, a seven-stage framework has been developed and is presented herein. The framework enables sites to analyze their own near-miss programs, identify weak management links, and implement systemwide improvements.

Safety-net hospitals more likely than other hospitals to fare poorly under Medicare's value-based purchasing.

PubMed

Gilman, Matlin; Adams, E Kathleen; Hockenberry, Jason M; Milstein, Arnold S; Wilson, Ira B; Becker, Edmund R

2015-03-01

Medicare's value-based purchasing (VBP) program potentially puts safety-net hospitals at a financial disadvantage compared to other hospitals. In 2014, the second year of the program, patient mortality measures were added to the VBP program's algorithm for assigning penalties and rewards. We examined whether the inclusion of mortality measures in the second year of the program had a disproportionate impact on safety-net hospitals nationally. We found that safety-net hospitals were more likely than other hospitals to be penalized under the VBP program as a result of their poorer performance on process and patient experience scores. In 2014, 63 percent of safety-net hospitals versus 51 percent of all other sample hospitals received payment rate reductions under the program. However, safety-net hospitals' performance on mortality measures was comparable to that of other hospitals, with an average VBP survival score of thirty-two versus thirty-one among other hospitals. Although safety-net hospitals are still more likely than other hospitals to fare poorly under the VBP program, increasing the weight given to mortality in the VBP payment algorithm would reduce this disadvantage. Project HOPE—The People-to-People Health Foundation, Inc.

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

NASA Technical Reports Server (NTRS)

Sawyer, J. C., Jr.

1993-01-01

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

76 FR 64110 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... DEPARTMENT OF LABOR Mine Safety and Health Administration RIN 1219-AB71 Safety and Health Management Programs for Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice of public meetings. SUMMARY: The Mine Safety and Health Administration (MSHA) is holding a public meeting, and plans...

Safety Teams: An Approach to Engage Students in Laboratory Safety

ERIC Educational Resources Information Center

Alaimo, Peter J.; Langenhan, Joseph M.; Tanner, Martha J.; Ferrenberg, Scott M.

2010-01-01

We developed and implemented a yearlong safety program into our organic chemistry lab courses that aims to enhance student attitudes toward safety and to ensure students learn to recognize, demonstrate, and assess safe laboratory practices. This active, collaborative program involves the use of student "safety teams" and includes…

30 CFR 77.1708 - Safety program; instruction of persons employed at the mine.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at the mine. 77.1708 Section 77.1708 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1708 Safety program; instruction of persons...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

National Dam Safety Program. Lake Muskoday Dam (Inventory Number N.Y. 341) Delaware River Basin, Sullivan County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-09-14

DACW-51-81-C-0006 . PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT PROJECT. TASK AREA & WORK UNIT NUMBERS ~ Flaherty-Giauara Associates...olie It neceary and Idontily b block number) Dam Safety National Dam Safety Program Visual Inspection Lake Muskoday Dam Hydrology, Structural Stability...DELAWARE RIVER BASIN LAKE MUSKODAY DAM SULLIVAN COUNTY, NEW YORK INVENTORY No.NY341 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAM J T C NEW YORK

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

PubMed

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

2006 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

TenHaken, Ron; Daniels, B.; Becker, M.; Barnes, Zack; Donovan, Shawn; Manley, Brenda

2007-01-01

Throughout 2006, Range Safety was involved in a number of exciting and challenging activities and events, from developing, implementing, and supporting Range Safety policies and procedures-such as the Space Shuttle Launch and Landing Plans, the Range Safety Variance Process, and the Expendable Launch Vehicle Safety Program procedures-to evaluating new technologies. Range Safety training development is almost complete with the last course scheduled to go on line in mid-2007. Range Safety representatives took part in a number of panels and councils, including the newly formed Launch Constellation Range Safety Panel, the Range Commanders Council and its subgroups, the Space Shuttle Range Safety Panel, and the unmanned aircraft systems working group. Space based range safety demonstration and certification (formerly STARS) and the autonomous flight safety system were successfully tested. The enhanced flight termination system will be tested in early 2007 and the joint advanced range safety system mission analysis software tool is nearing operational status. New technologies being evaluated included a processor for real-time compensation in long range imaging, automated range surveillance using radio interferometry, and a space based range command and telemetry processor. Next year holds great promise as we continue ensuring safety while pursuing our quest beyond the Moon to Mars.

Bertolette Selected as EHS Champion of Safety | Poster

Cancer.gov

Dan Bertolette has been selected as the most recent NCI at Frederick Champion of Safety, as part of the Champions of Safety Program sponsored by the Environment, Health, and Safety Program (EHS). The goal of the program, which began last year, is to raise awareness and promote a culture of safety by showing NCI at Frederick staff at work in their respective workplaces, according to Terri Bray, director, EHS. “Since we have so many varied work environments here, safety often takes on a different look, according to workplace. We want to take the opportunity to show real people in real situations, to encourage safety everywhere,” Bray said.

Ares I-X Malfunction Turn Range Safety Analysis

NASA Technical Reports Server (NTRS)

Beaty, J. R.

2011-01-01

Ares I-X was the designation given to the flight test version of the Ares I rocket which was developed by NASA (also known as the Crew Launch Vehicle (CLV) component of the Constellation Program). The Ares I-X flight test vehicle achieved a successful flight test on October 28, 2009, from Pad LC-39B at Kennedy Space Center, Florida (KSC). As part of the flight plan approval for the test vehicle, a range safety malfunction turn analysis was performed to support the risk assessment and vehicle destruct criteria development processes. Several vehicle failure scenarios were identified which could have caused the vehicle trajectory to deviate from its normal flight path. The effects of these failures were evaluated with an Ares I-X 6 degrees-of-freedom (6-DOF) digital simulation, using the Program to Optimize Simulated Trajectories Version II (POST2) simulation tool. The Ares I-X simulation analysis provided output files containing vehicle trajectory state information. These were used by other risk assessment and vehicle debris trajectory simulation tools to determine the risk to personnel and facilities in the vicinity of the launch area at KSC, and to develop the vehicle destruct criteria used by the flight test range safety officer in the event of a flight test anomaly of the vehicle. The simulation analysis approach used for this study is described, including descriptions of the failure modes which were considered and the underlying assumptions and ground rules of the study.

77 FR 15453 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... information collection titled, ``Gas Pipeline Safety Program Certification and Hazardous Liquid Pipeline... collection request that PHMSA will be submitting to OMB for renewal titled, ``Gas Pipeline Safety Program...