Sample records for safety assessments fiabilidad
-
HSE's safety assessment principles for criticality safety.
Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R
2008-06-01
The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).
-
Offshore safety case approach and formal safety assessment of ships.
Wang, J
2002-01-01
Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.
-
Correlation between safety climate and contractor safety assessment programs in construction
Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt
2015-01-01
Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403
-
Correlation between safety climate and contractor safety assessment programs in construction.
Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T
2013-12-01
Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.
-
Safety Auditing and Assessments
NASA Technical Reports Server (NTRS)
Goodin, James Ronald (Ronnie)
2005-01-01
Safety professionals typically do not engage in audits and independent assessments with the vigor as do our quality brethren. Taking advantage of industry and government experience conducting value added Independent Assessments or Audits benefits a safety program. Most other organizations simply call this process "internal audits." Sources of audit training are presented and compared. A relation of logic between audit techniques and mishap investigation is discussed. An example of an audit process is offered. Shortcomings and pitfalls of auditing are covered.
-
Safety Auditing and Assessments
NASA Astrophysics Data System (ADS)
Goodin, Ronnie
2005-12-01
Safety professionals typically do not engage in audits and independent assessments with the vigor as do our quality brethren. Taking advantage of industry and government experience conducting value added Independent Assessments or Audits benefits a safety program. Most other organizations simply call this process "internal audits." Sources of audit training are presented and compared. A relation of logic between audit techniques and mishap investigation is discussed. An example of an audit process is offered. Shortcomings and pitfalls of auditing are covered.
-
Assessment of Electrical Safety in Afghanistan
2009-07-24
effectiveness of command efforts to ensure the electrical safety of Department of Defense occupied and constructed facilities in Afghanistan. We...March 31, 2009, we announced the Assessment of Electrical Safety in Afghanistan. The objective of this assessment was to review the effectiveness of...used contractors to review and identify electrical deficiencies to include life, health , and safety issues at FOBs. According to TF POWER
-
Di Maio, Francesco; Zio, Enrico; Smith, Curtis; ...
2015-07-06
The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less
-
Constantly evolving safety assessment protocols for GM foods.
Sesikeran, B; Vasanthi, Siruguri
2008-01-01
he introduction of GM foods has led to the evolution of a food safety assessment paradigm that establishes safety of the GM food relative to its conventional counterpart. The GM foods currently approved and marketed in several countries have undergone extensive safety testing under a structured safety assessment framework evolved by international organizations like FAO, WHO, Codex and OECD. The major elements of safety assessment include molecular characterization of inserted genes and stability of the trait, toxicity and allergenicity potential of the expressed substances, compositional analysis, potential for gene transfer to gut microflora and unintentional effects of the genetic modification. As more number and type of food crops are being brought under the genetic modification regime, the adequacy of existing safety assessment protocols for establishing safety of these foods has been questioned. Such crops comprise GM crops with higher agronomic vigour, nutritional or health benefit/ by modification of plant metabolic pathways and those expressing bioactive substances and pharmaceuticals. The safety assessment challenges of these foods are the potential of the methods to detect unintentional effects with higher sensitivity and rigor. Development of databases on food compositions, toxicants and allergens is currently seen as an important aid to development of safety protocols. With the changing global trends in genetic modification technology future challenge would be to develop GM crops with minimum amount of inserted foreign DNA so as to reduce the burden of complex safety assessments while ensuring safety and utility of the technology.
-
Safety assessment of plant food supplements (PFS).
van den Berg, Suzanne J P L; Serra-Majem, Lluis; Coppens, Patrick; Rietjens, Ivonne M C M
2011-12-01
Botanicals and botanical preparations, including plant food supplements (PFS), are widely used in Western diets. The growing use of PFS is accompanied by an increasing concern because the safety of these PFS is not generally assessed before they enter the market. Regulatory bodies have become more aware of this and are increasing their efforts to ensure the safety of PFS. The present review describes an overview of the general framework for the safety assessment of PFS, focusing on the different approaches currently in use to assess the safety of botanicals and/or botanical compounds, including their history of safe use, the tiered approach proposed by the European Food Safety Authority (EFSA), the Threshold of Toxicological Concern (TTC) and the Margin of Exposure (MOE) concept. Moreover, some examples of botanical compounds in PFS that may be of concern are discussed. Altogether, it is clear that "natural" does not equal "safe" and that PFS may contain compounds of concern at levels far above those found in the regular diet. In addition, the traditional use of a PFS compound as a herb or tea does not guarantee its safety when used as a supplement. This points at a need for stricter regulation and control of botanical containing products, especially given their expanding market volume.
-
Safety Assessment of Polyether Lanolins as Used in Cosmetics.
Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan; Heldreth, Bart
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 39 polyether lanolin ingredients as used in cosmetics. These ingredients function mostly as hair conditioning agents, skin conditioning agent-emollients, and surfactant-emulsifying agents. The Panel reviewed available animal and clinical data, from previous CIR safety assessments of related ingredients and components. The similar structure, properties, functions, and uses of these ingredients enabled grouping them and using the available toxicological data to assess the safety of the entire group. The Panel concluded that these polyether lanolin ingredients are safe in the practices of use and concentration as given in this safety assessment.
-
Haslberger, Alexander G
2006-05-03
Evidence for substantial environmental influences on health and food safety comes from work with environmental health indicators which show that agroenvironmental practices have direct and indirect effects on human health, concluding that "the quality of the environment influences the quality and safety of foods" [Fennema, O. Environ. Health Perspect. 1990, 86, 229-232). In the field of genetically modified organisms (GMOs), Codex principles have been established for the assessment of GM food safety and the Cartagena Protocol on Biosafety outlines international principles for an environmental assessment of living modified organisms. Both concepts also contain starting points for an assessment of health/food safety effects of GMOs in cases when the environment is involved in the chain of events that could lead to hazards. The environment can act as a route of unintentional entry of GMOs into the food supply, such as in the case of gene flow via pollen or seeds from GM crops, but the environment can also be involved in changes of GMO-induced agricultural practices with relevance for health/food safety. Examples for this include potential regional changes of pesticide uses and reduction in pesticide poisonings resulting from the use of Bt crops or influences on immune responses via cross-reactivity. Clearly, modern methods of biotechnology in breeding are involved in the reasons behind the rapid reduction of local varieties in agrodiversity, which constitute an identified hazard for food safety and food security. The health/food safety assessment of GM foods in cases when the environment is involved needs to be informed by data from environmental assessment. Such data might be especially important for hazard identification and exposure assessment. International organizations working in these areas will very likely be needed to initiate and enable cooperation between those institutions responsible for the different assessments, as well as for exchange and analysis of
-
Safety assessment and detection methods of genetically modified organisms.
Xu, Rong; Zheng, Zhe; Jiao, Guanglian
2014-01-01
Genetically modified organisms (GMOs), are gaining importance in agriculture as well as the production of food and feed. Along with the development of GMOs, health and food safety concerns have been raised. These concerns for these new GMOs make it necessary to set up strict system on food safety assessment of GMOs. The food safety assessment of GMOs, current development status of safety and precise transgenic technologies and GMOs detection have been discussed in this review. The recent patents about GMOs and their detection methods are also reviewed. This review can provide elementary introduction on how to assess and detect GMOs.
-
DOT National Transportation Integrated Search
2017-06-01
The purpose of this study was to evaluate if the Surrogate Safety Assessment Model (SSAM) could be used to assess the safety of a highway segment or an intersection in terms of the number and type of conflicts and to compare the safety effects of mul...
-
Comparative safety assessment of plant-derived foods.
Kok, E J; Keijer, J; Kleter, G A; Kuiper, H A
2008-02-01
The second generation of genetically modified (GM) plants that are moving towards the market are characterized by modifications that may be more complex and traits that more often are to the benefit of the consumer. These developments will have implications for the safety assessment of the resulting plant products. In part of the cases the same crop plant can, however, also be obtained by 'conventional' breeding strategies. The breeder will decide on a case-by-case basis what will be the best strategy to reach the set target and whether genetic modification will form part of this strategy. This article discusses important aspects of the safety assessment of complex products derived from newly bred plant varieties obtained by different breeding strategies. On the basis of this overview, we conclude that the current process of the safety evaluation of GM versus conventionally bred plants is not well balanced. GM varieties are elaborately assessed, yet at the same time other crop plants resulting from conventional breeding strategies may warrant further food safety assessment for the benefit of the consumer. We propose to develop a general screening frame for all newly developed plant varieties to select varieties that cannot, on the basis of scientific criteria, be considered as safe as plant varieties that are already on the market.
-
Initial development of a practical safety audit tool to assess fleet safety management practices.
Mitchell, Rebecca; Friswell, Rena; Mooren, Lori
2012-07-01
Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.
-
Animal-Free Chemical Safety Assessment
Loizou, George D.
2016-01-01
The exponential growth of the Internet of Things and the global popularity and remarkable decline in cost of the mobile phone is driving the digital transformation of medical practice. The rapidly maturing digital, non-medical world of mobile (wireless) devices, cloud computing and social networking is coalescing with the emerging digital medical world of omics data, biosensors and advanced imaging which offers the increasingly realistic prospect of personalized medicine. Described as a potential “seismic” shift from the current “healthcare” model to a “wellness” paradigm that is predictive, preventative, personalized and participatory, this change is based on the development of increasingly sophisticated biosensors which can track and measure key biochemical variables in people. Additional key drivers in this shift are metabolomic and proteomic signatures, which are increasingly being reported as pre-symptomatic, diagnostic and prognostic of toxicity and disease. These advancements also have profound implications for toxicological evaluation and safety assessment of pharmaceuticals and environmental chemicals. An approach based primarily on human in vivo and high-throughput in vitro human cell-line data is a distinct possibility. This would transform current chemical safety assessment practice which operates in a human “data poor” to a human “data rich” environment. This could also lead to a seismic shift from the current animal-based to an animal-free chemical safety assessment paradigm. PMID:27493630
-
Safety assessment for hair-spray resins: risk assessment based on rodent inhalation studies.
Carthew, Philip; Griffiths, Heather; Keech, Stephen; Hartop, Peter
2002-04-01
The methods involved in the safety assessment of resins used in hair-spray products have received little peer review, or debate in the published literature, despite their widespread use, in both hairdressing salons and the home. The safety assessment for these resins currently involves determining the type of lung pathology that can be caused in animal inhalation exposure studies, and establishing the no-observable-effect level (NOEL) for these pathologies. The likely human consumer exposure is determined by techniques that model the simulated exposure under "in use" conditions. From these values it is then possible to derive the likely safety factors for human exposure. An important part of this process would be to recognize the intrinsic differences between rodents and humans in terms of the respiratory doses that each species experiences during inhalation exposures, for the purpose of the safety assessment. Interspecies scaling factors become necessary when comparing the exposure doses experienced by rats, compared to humans, because of basic differences between species in lung clearance rates and the alveolar area in the lungs. The rodent inhalation data and modeled human exposure to Resin 6965, a resin polymer that is based on vinyl acetate, has been used to calculate the safety factor for human consumer exposure to this resin, under a range of "in use" exposure conditions. The use of this safety assessment process clearly demonstrates that Resin 6965 is acceptable for human consumer exposure under the conditions considered in this risk assessment.
-
Pharmacological mechanism-based drug safety assessment and prediction.
Abernethy, D R; Woodcock, J; Lesko, L J
2011-06-01
Advances in cheminformatics, bioinformatics, and pharmacology in the context of biological systems are now at a point that these tools can be applied to mechanism-based drug safety assessment and prediction. The development of such predictive tools at the US Food and Drug Administration (FDA) will complement ongoing efforts in drug safety that are focused on spontaneous adverse event reporting and active surveillance to monitor drug safety. This effort will require the active collaboration of scientists in the pharmaceutical industry, academe, and the National Institutes of Health, as well as those at the FDA, to reach its full potential. Here, we describe the approaches and goals for the mechanism-based drug safety assessment and prediction program.
-
LANL Safety Conscious Work Environment (SCWE) Self-Assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hargis, Barbara C.
2014-01-29
On December 21, 2012 Secretary of Energy Chu transmitted to the Defense Nuclear Facilities Safety Board (DNFSB) revised commitments on the implementation plan for Safety Culture at the Waste Treatment and Immobilization Plant. Action 2-5 was revised to require contractors and federal organizations to complete Safety Conscious Work Environment (SCWE) selfassessments and provide reports to the appropriate U.S. Department of Energy (DOE) - Headquarters Program Office by September 2013. Los Alamos National Laboratory (LANL) planned and conducted a Safety Conscious Work Environment (SCWE) Self-Assessment over the time period July through August, 2013 in accordance with the SCWE Self-Assessment Guidance providedmore » by DOE. Significant field work was conducted over the 2-week period August 5-16, 2013. The purpose of the self-assessment was to evaluate whether programs and processes associated with a SCWE are in place and whether they are effective in supporting and promoting a SCWE.« less
-
Safety management system needs assessment.
DOT National Transportation Integrated Search
2016-04-01
The safety of the traveling public is critical as each year there are approximately 200 highway fatalities in Nebraska and numerous crash injuries. The objective of this research was to conduct a needs assessment to identify the requirements of a sta...
-
Methodology to assess clinical liver safety data.
Merz, Michael; Lee, Kwan R; Kullak-Ublick, Gerd A; Brueckner, Andreas; Watkins, Paul B
2014-11-01
Analysis of liver safety data has to be multivariate by nature and needs to take into account time dependency of observations. Current standard tools for liver safety assessment such as summary tables, individual data listings, and narratives address these requirements to a limited extent only. Using graphics in the context of a systematic workflow including predefined graph templates is a valuable addition to standard instruments, helping to ensure completeness of evaluation, and supporting both hypothesis generation and testing. Employing graphical workflows interactively allows analysis in a team-based setting and facilitates identification of the most suitable graphics for publishing and regulatory reporting. Another important tool is statistical outlier detection, accounting for the fact that for assessment of Drug-Induced Liver Injury, identification and thorough evaluation of extreme values has much more relevance than measures of central tendency in the data. Taken together, systematical graphical data exploration and statistical outlier detection may have the potential to significantly improve assessment and interpretation of clinical liver safety data. A workshop was convened to discuss best practices for the assessment of drug-induced liver injury (DILI) in clinical trials.
-
Safety Assessment of Synthetic Fluorphlogopite as Used in Cosmetics.
Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-01-01
The Cosmetic Ingredient Review Expert Panel (the Panel) reviewed the safety of synthetic fluorphlogopite as used in cosmetics. Synthetic fluorphlogopite functions as a bulking agent and a viscosity-increasing agent. The Panel reviewed available animal and human data related to this ingredient along with a previous safety assessment of other magnesium silicates. The Panel concluded that synthetic fluorphlogopite was safe as cosmetic ingredients in the practices of use and concentration as given in this safety assessment. © The Author(s) 2015.
-
A novel safety assessment strategy applied to non-selective extracts.
Koster, Sander; Leeman, Winfried; Verheij, Elwin; Dutman, Ellen; van Stee, Leo; Nielsen, Lene Munch; Ronsmans, Stefan; Noteborn, Hub; Krul, Lisette
2015-06-01
A main challenge in food safety research is to demonstrate that processing of foodstuffs does not lead to the formation of substances for which the safety upon consumption might be questioned. This is especially so since food is a complex matrix in which the analytical detection of substances, and consequent risk assessment thereof, is difficult to determine. Here, a pragmatic novel safety assessment strategy is applied to the production of non-selective extracts (NSEs), used for different purposes in food such as for colouring purposes, which are complex food mixtures prepared from reference juices. The Complex Mixture Safety Assessment Strategy (CoMSAS) is an exposure driven approach enabling to efficiently assess the safety of the NSE by focussing on newly formed substances or substances that may increase in exposure during the processing of the NSE. CoMSAS enables to distinguish toxicologically relevant from toxicologically less relevant substances, when related to their respective levels of exposure. This will reduce the amount of work needed for identification, characterisation and safety assessment of unknown substances detected at low concentration, without the need for toxicity testing using animal studies. In this paper, the CoMSAS approach has been applied for elderberry and pumpkin NSEs used for food colouring purposes. Copyright © 2015 Elsevier Ltd. All rights reserved.
-
Mine safety assessment using gray relational analysis and bow tie model
2018-01-01
Mine safety assessment is a precondition for ensuring orderly and safety in production. The main purpose of this study was to prevent mine accidents more effectively by proposing a composite risk analysis model. First, the weights of the assessment indicators were determined by the revised integrated weight method, in which the objective weights were determined by a variation coefficient method and the subjective weights determined by the Delphi method. A new formula was then adopted to calculate the integrated weights based on the subjective and objective weights. Second, after the assessment indicator weights were determined, gray relational analysis was used to evaluate the safety of mine enterprises. Mine enterprise safety was ranked according to the gray relational degree, and weak links of mine safety practices identified based on gray relational analysis. Third, to validate the revised integrated weight method adopted in the process of gray relational analysis, the fuzzy evaluation method was used to the safety assessment of mine enterprises. Fourth, for first time, bow tie model was adopted to identify the causes and consequences of weak links and allow corresponding safety measures to be taken to guarantee the mine’s safe production. A case study of mine safety assessment was presented to demonstrate the effectiveness and rationality of the proposed composite risk analysis model, which can be applied to other related industries for safety evaluation. PMID:29561875
-
The practice of pre-marketing safety assessment in drug development.
Chuang-Stein, Christy; Xia, H Amy
2013-01-01
The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.
-
Bayesian-network-based safety risk assessment for steel construction projects.
Leu, Sou-Sen; Chang, Ching-Miao
2013-05-01
There are four primary accident types at steel building construction (SC) projects: falls (tumbles), object falls, object collapse, and electrocution. Several systematic safety risk assessment approaches, such as fault tree analysis (FTA) and failure mode and effect criticality analysis (FMECA), have been used to evaluate safety risks at SC projects. However, these traditional methods ineffectively address dependencies among safety factors at various levels that fail to provide early warnings to prevent occupational accidents. To overcome the limitations of traditional approaches, this study addresses the development of a safety risk-assessment model for SC projects by establishing the Bayesian networks (BN) based on fault tree (FT) transformation. The BN-based safety risk-assessment model was validated against the safety inspection records of six SC building projects and nine projects in which site accidents occurred. The ranks of posterior probabilities from the BN model were highly consistent with the accidents that occurred at each project site. The model accurately provides site safety-management abilities by calculating the probabilities of safety risks and further analyzing the causes of accidents based on their relationships in BNs. In practice, based on the analysis of accident risks and significant safety factors, proper preventive safety management strategies can be established to reduce the occurrence of accidents on SC sites. Copyright © 2013 Elsevier Ltd. All rights reserved.
-
Extended time-to-collision measures for road traffic safety assessment.
Minderhoud, M M; Bovy, P H
2001-01-01
This article describes two new safety indicators based on the time-to-collision notion suitable for comparative road traffic safety analyses. Such safety indicators can be applied in the comparison of a do-nothing case with an adapted situation, e.g. the introduction of intelligent driver support systems. In contrast to the classical time-to-collision value, measured at a cross section, the improved safety indicators use vehicle trajectories collected over a specific time horizon for a certain roadway segment to calculate the overall safety indicator value. Vehicle-specific indicator values as well as safety-critical probabilities can easily be determined from the developed safety measures. Application of the derived safety indicators is demonstrated for the assessment of the potential safety impacts of driver support systems from which it appears that some Autonomous Intelligent Cruise Control (AICC) designs are more safety-critical than the reference case without these systems. It is suggested that the indicator threshold value to be applied in the safety assessment has to be adapted when advanced AICC-systems with safe characteristics are introduced.
-
Safety analysis and review system (SARS) assessment report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Browne, E.T.
1981-03-01
Under DOE Order 5481.1, Safety Analysis and Review System for DOE Operations, safety analyses are required for DOE projects in order to ensure that: (1) potential hazards are systematically identified; (2) potential impacts are analyzed; (3) reasonable measures have been taken to eliminate, control, or mitigate the hazards; and (4) there is documented management authorization of the DOE operation based on an objective assessment of the adequacy of the safety analysis. This report is intended to provide the DOE Office of Plans and Technology Assessment (OPTA) with an independent evaluation of the adequacy of the ongoing safety analysis effort. Asmore » part of this effort, a number of site visits and interviews were conducted, and FE SARS documents were reviewed. The latter included SARS Implementation Plans for a number of FE field offices, as well as safety analysis reports completed for certain FE operations. This report summarizes SARS related efforts at the DOE field offices visited and evaluates the extent to which they fulfill the requirements of DOE 5481.1.« less
-
Horowitz, Beverly P; Almonte, Tiffany; Vasil, Andrea
2016-10-01
This exploratory research examined the benefits of a health education program utilizing the Home Safety Self-Assessment Tool (HSSAT) to increase perceived knowledge of home safety, recognition of unsafe activities, ability to safely perform activities, and develop home safety plans of 47 older adults. Focus groups in two senior centers explored social workers' perspectives on use of the HSSAT in community practice. Results for the health education program found significant differences between reported knowledge of home safety (p = .02), ability to recognize unsafe activities (p = .01), safely perform activities (p = .04), and develop a safety plan (p = .002). Social workers identified home safety as a major concern and the HSSAT a promising assessment tool. Research has implications for reducing environmental fall risks.
-
[Agricultural biotechnology safety assessment].
McClain, Scott; Jones, Wendelyn; He, Xiaoyun; Ladics, Gregory; Bartholomaeus, Andrew; Raybould, Alan; Lutter, Petra; Xu, Haibin; Wang, Xue
2015-01-01
Genetically modified (GM) crops were first introduced to farmers in 1995 with the intent to provide better crop yield and meet the increasing demand for food and feed. GM crops have evolved to include a thorough safety evaluation for their use in human food and animal feed. Safety considerations begin at the level of DNA whereby the inserted GM DNA is evaluated for its content, position and stability once placed into the crop genome. The safety of the proteins coded by the inserted DNA and potential effects on the crop are considered, and the purpose is to ensure that the transgenic novel proteins are safe from a toxicity, allergy, and environmental perspective. In addition, the grain that provides the processed food or animal feed is also tested to evaluate its nutritional content and identify unintended effects to the plant composition when warranted. To provide a platform for the safety assessment, the GM crop is compared to non-GM comparators in what is typically referred to as composition equivalence testing. New technologies, such as mass spectrometry and well-designed antibody-based methods, allow better analytical measurements of crop composition, including endogenous allergens. Many of the analytical methods and their intended uses are based on regulatory guidance documents, some of which are outlined in globally recognized documents such as Codex Alimentarius. In certain cases, animal models are recommended by some regulatory agencies in specific countries, but there is typically no hypothesis or justification of their use in testing the safety of GM crops. The quality and standardization of testing methods can be supported, in some cases, by employing good laboratory practices (GLP) and is recognized in China as important to ensure quality data. Although the number of recommended, in some cases, required methods for safety testing are increasing in some regulatory agencies, it should be noted that GM crops registered to date have been shown to be
-
Comprehensive safety management and assessment at rugby football competitions.
Tajima, T; Chosa, E; Kawahara, K; Nakamura, Y; Yoshikawa, D; Yamaguchi, N; Kashiwagi, T
2014-11-01
The present study aims to improve medical systems by designing objective safety assessment criteria for rugby competitions. We evaluated 195 competitions between 2002 and 2011 using an original safety scale comprising the following sections: 1) competence of staff such as referees, medical attendants and match day doctor; 2) environment such as weather, wet bulb globe temperature and field conditions; and 3) emergency medical care systems at the competitions. Each section was subdivided into groups A, B and C according to good, normal or fair degrees of safety determined by combinations of the results.Overall safety was assessed as A, B and C for 110, 78 and 7 competitions, respectively. The assessments of individual major factors were mostly favorable for staff, but the environment and medical care systems were assessed as C in 25 and 70, respectively, of the 195 competitions. Medical management involves not having a match day doctor, but also comprehensive management including preventive factors and responses from the staff, environment and medical-care systems. 6 cases of severe injuries and accidents occurred between 2002 and 2011, which were observed in Grade A competition. These cases revealed better prognosis without obvious impairment, thus confirming the value of the present assessment scale. © Georg Thieme Verlag KG Stuttgart · New York.
-
Safety Assessment of Alkyl Esters as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart A; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-09-01
The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of 237 alkyl esters for use in cosmetics. The alkyl esters included in this assessment have a variety of reported functions in cosmetics, with skin-conditioning agent being the most common function. The Panel reviewed available animal and clinical data in making its determination of safety on these ingredients, and where there were data gaps, similarity in structure, properties, functions, and uses of these ingredients allowed for extrapolation of the available toxicological data to assess the safety of the entire group. The Panel concluded that these ingredients are safe in cosmetic formulations in the present practices of use and concentration when formulated to be nonirritating. © The Author(s) 2015.
-
Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio
2008-12-15
Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.
-
Safety Assessment of Pentaerythrityl Tetraesters as Used in Cosmetics.
Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-09-01
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) reviewed the safety of 16 pentaerythrityl tetraester compounds as used in cosmetics. These ingredients mostly function as hair-conditioning agents, skin-conditioning agents-miscellaneous and binders, skin-conditioning agents-occlusive, viscosity-increasing agents-nonaqueous, and skin-conditioning agents-emollient. The Panel reviewed the available animal and human data related to these ingredients and previous safety assessments of the fatty acid moieties. The Panel concluded that pentaerythrityl tetraisostearate and the other pentaerythrityl tetraester compounds were safe in the practices of use and concentration as given in this safety assessment. © The Author(s) 2015.
-
Processes of technology assessment: The National Transportation Safety Board
NASA Technical Reports Server (NTRS)
Weiss, E.
1972-01-01
The functions and operations of the Safety Board as related to technology assessment are described, and a brief history of the Safety Board is given. Recommendations made for safety in all areas of transportation and the actions taken are listed. Although accident investigation is an important aspect of NTSB's activity, it is felt that the greatest contribution is in pressing for development of better accident prevention programs. Efforts of the Safety Board in changing transportation technology to improve safety and prevent accidents are illustrated.
-
Safety Assessment of Talc as Used in Cosmetics.
Fiume, Monice M; Boyer, Ivan; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-01-01
The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of talc for use in cosmetics. The safety of talc has been the subject of much debate through the years, partly because the relationship between talc and asbestos is commonly misunderstood. Industry specifications state that cosmetic-grade talc must contain no detectable fibrous, asbestos minerals. Therefore, the large amount of available animal and clinical data the Panel relied on in assessing the safety of talc only included those studies on talc that did not contain asbestos. The Panel concluded that talc is safe for use in cosmetics in the present practices of use and concentration (some cosmetic products are entirely composed of talc). Talc should not be applied to the skin when the epidermal barrier is missing or significantly disrupted. © The Author(s) 2015.
-
Safety assessment methodology in management of spent sealed sources.
Mahmoud, Narmine Salah
2005-02-14
Environmental hazards can be caused from radioactive waste after their disposal. It was therefore important that safety assessment methodologies be developed and established to study and estimate the possible hazards, and institute certain safety methodologies that lead and prevent the evolution of these hazards. Spent sealed sources are specific type of radioactive waste. According to IAEA definition, spent sealed sources are unused sources because of activity decay, damage, misuse, loss, or theft. Accidental exposure of humans from spent sealed sources can occur at the moment they become spent and before their disposal. Because of that reason, safety assessment methodologies were tailored to suit the management of spent sealed sources. To provide understanding and confidence of this study, validation analysis was undertaken by considering the scenario of an accident that occurred in Egypt, June 2000 (the Meet-Halfa accident from an iridium-192 source). The text of this work includes consideration related to the safety assessment approaches of spent sealed sources which constitutes assessment context, processes leading an active source to be spent, accident scenarios, mathematical models for dose calculations, and radiological consequences and regulatory criteria. The text also includes a validation study, which was carried out by evaluating a theoretical scenario compared to the real scenario of Meet-Halfa accident depending on the clinical assessment of affected individuals.
-
76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-01
... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 575 [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT). ACTION...
-
High-Throughput Toxicity Testing: New Strategies for Assessing Chemical Safety
In recent years, the food industry has made progress in improving safety testing methods focused on microbial contaminants in order to promote food safety. However, food industry toxicologists must also assess the safety of food-relevant chemicals including pesticides, direct add...
-
Assessment of Safety Standards for Automotive Electronic Control Systems
DOT National Transportation Integrated Search
2016-06-01
This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...
-
Why the Eurocontrol Safety Regulation Commission Policy on Safety Nets and Risk Assessment is Wrong
NASA Astrophysics Data System (ADS)
Brooker, Peter
2004-05-01
Current Eurocontrol Safety Regulation Commission (SRC) policy says that the Air Traffic Management (ATM) system (including safety minima) must be demonstrated through risk assessments to meet the Target Level of Safety (TLS) without needing to take safety nets (such as Short Term Conflict Alert) into account. This policy is wrong. The policy is invalid because it does not build rationally and consistently from ATM's firm foundations of TLS and hazard analysis. The policy is bad because it would tend to retard safety improvements. Safety net policy must rest on a clear and rational treatment of integrated ATM system safety defences. A new safety net policy, appropriate to safe ATM system improvements, is needed, which recognizes that safety nets are an integrated part of ATM system defences. The effects of safety nets in reducing deaths from mid-air collisions should be fully included in hazard analysis and safety audits in the context of the TLS for total system design.
-
NASA Technical Reports Server (NTRS)
Xu, Xidong; Ulrey, Mike L.; Brown, John A.; Mast, James; Lapis, Mary B.
2013-01-01
NextGen is a complex socio-technical system and, in many ways, it is expected to be more complex than the current system. It is vital to assess the safety impact of the NextGen elements (technologies, systems, and procedures) in a rigorous and systematic way and to ensure that they do not compromise safety. In this study, the NextGen elements in the form of Operational Improvements (OIs), Enablers, Research Activities, Development Activities, and Policy Issues were identified. The overall hazard situation in NextGen was outlined; a high-level hazard analysis was conducted with respect to multiple elements in a representative NextGen OI known as OI-0349 (Automation Support for Separation Management); and the hazards resulting from the highly dynamic complexity involved in an OI-0349 scenario were illustrated. A selected but representative set of the existing safety methods, tools, processes, and regulations was then reviewed and analyzed regarding whether they are sufficient to assess safety in the elements of that OI and ensure that safety will not be compromised and whether they might incur intolerably high costs.
-
Sorensen, Glorian; Sparer, Emily; Williams, Jessica A R; Gundersen, Daniel; Boden, Leslie I; Dennerlein, Jack T; Hashimoto, Dean; Katz, Jeffrey N; McLellan, Deborah L; Okechukwu, Cassandra A; Pronk, Nicolaas P; Revette, Anna; Wagner, Gregory R
2018-05-01
To present a measure of effective workplace organizational policies, programs, and practices that focuses on working conditions and organizational facilitators of worker safety, health and well-being: the workplace integrated safety and health (WISH) assessment. Development of this assessment used an iterative process involving a modified Delphi method, extensive literature reviews, and systematic cognitive testing. The assessment measures six core constructs identified as central to best practices for protecting and promoting worker safety, health and well-being: leadership commitment; participation; policies, programs, and practices that foster supportive working conditions; comprehensive and collaborative strategies; adherence to federal and state regulations and ethical norms; and data-driven change. The WISH Assessment holds promise as a tool that may inform organizational priority setting and guide research around causal pathways influencing implementation and outcomes related to these approaches.
-
NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review
NASA Technical Reports Server (NTRS)
Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick
2003-01-01
The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.
-
Patient safety competencies in undergraduate nursing students: a rapid evidence assessment.
Bianchi, Monica; Bressan, Valentina; Cadorin, Lucia; Pagnucci, Nicola; Tolotti, Angela; Valcarenghi, Dario; Watson, Roger; Bagnasco, Annamaria; Sasso, Loredana
2016-12-01
To identify patient safety competencies, and determine the clinical learning environments that facilitate the development of patient safety competencies in nursing students. Patient safety in nursing education is of key importance for health professional environments, settings and care systems. To be effective, safe nursing practice requires a good integration between increasing knowledge and the different clinical practice settings. Nurse educators have the responsibility to develop effective learning processes and ensure patient safety. Rapid Evidence Assessment. MEDLINE, CINAHL, SCOPUS and ERIC were searched, yielding 500 citations published between 1 January 2004-30 September 2014. Following the Rapid Evidence Assessment process, 17 studies were included in this review. Hawker's (2002) quality assessment tool was used to assess the quality of the selected studies. Undergraduate nursing students need to develop competencies to ensure patient safety. The quality of the pedagogical atmosphere in the clinical setting has an important impact on the students' overall level of competence. Active student engagement in clinical processes stimulates their critical reasoning, improves interpersonal communication and facilitates adequate supervision and feedback. Few studies describe the nursing students' patient safety competencies and exactly what they need to learn. In addition, studies describe only briefly which clinical learning environments facilitate the development of patient safety competencies in nursing students. Further research is needed to identify additional pedagogical strategies and the specific characteristics of the clinical learning environments that encourage the development of nursing students' patient safety competencies. © 2016 John Wiley & Sons Ltd.
-
Edible safety requirements and assessment standards for agricultural genetically modified organisms.
Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke
2008-05-01
This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.
-
Higgins, Agnes; Doyle, Louise; Downes, Carmel; Morrissey, Jean; Costello, Paul; Brennan, Michael; Nash, Michael
2016-04-01
Risk assessment and safety planning are considered a cornerstone of mental health practice, yet limited research exists into how mental health nurses conceptualize 'risk' and how they engage with risk assessment and safety planning. The aim of the present study was to explore mental health nurses' practices and confidence in risk assessment and safety planning. A self-completed survey was administered to 381 mental health nurses in Ireland. The findings indicate that nurses focus on risk to self and risk to others, with the risk of suicide, self-harm, substance abuse, and violence being most frequently assessed. Risk from others and 'iatrogenic' risk were less frequently considered. Overall, there was limited evidence of recovery-oriented practice in relation to risk. The results demonstrate a lack of meaningful engagement with respect to collaborative safety planning, the identification and inclusion of protective factors, and the inclusion of positive risk-taking opportunities. In addition, respondents report a lack of confidence working with positive risk taking and involving family/carers in the risk-assessment and safety-planning process. Gaps in knowledge about risk-assessment and safety-planning practice, which could be addressed through education, are identified, as are the implications of the findings for practice and research. © 2015 Australian College of Mental Health Nurses Inc.
-
[Safety assessment of foods derived from genetically modified plants].
Pöting, A; Schauzu, M
2010-06-01
The placing of genetically modified plants and derived food on the market falls under Regulation (EC) No. 1829/2003. According to this regulation, applicants need to perform a safety assessment according to the Guidance Document of the Scientific Panel on Genetically Modified Organisms of the European Food Safety Authority (EFSA), which is based on internationally agreed recommendations. This article gives an overview of the underlying legislation as well as the strategy and scientific criteria for the safety assessment, which should generally be based on the concept of substantial equivalence and carried out in relation to an unmodified conventional counterpart. Besides the intended genetic modification, potential unintended changes also have to be assessed with regard to potential adverse effects for the consumer. All genetically modified plants and derived food products, which have been evaluated by EFSA so far, were considered to be as safe as products derived from the respective conventional plants.
-
Safety assessment of Vitis vinifera (grape)-derived ingredients as used in cosmetics.
Fiume, Monice M; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2014-01-01
The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of 24 Vitis vinifera (grape)-derived ingredients and found them safe in the present practices of use and concentration in cosmetics. These ingredients function in cosmetics mostly as skin-conditioning agents, but some function as antioxidants, flavoring agents, and/or colorants. The Panel reviewed the available animal and clinical data to determine the safety of these ingredients. Additionally, some constituents of grapes have been assessed previously for safety as cosmetic ingredients by the Panel, and others are compounds that have been discussed in previous Panel safety assessments. © The Author(s) 2014.
-
Quantitative safety assessment of air traffic control systems through system control capacity
NASA Astrophysics Data System (ADS)
Guo, Jingjing
Quantitative Safety Assessments (QSA) are essential to safety benefit verification and regulations of developmental changes in safety critical systems like the Air Traffic Control (ATC) systems. Effectiveness of the assessments is particularly desirable today in the safe implementations of revolutionary ATC overhauls like NextGen and SESAR. QSA of ATC systems are however challenged by system complexity and lack of accident data. Extending from the idea "safety is a control problem" in the literature, this research proposes to assess system safety from the control perspective, through quantifying a system's "control capacity". A system's safety performance correlates to this "control capacity" in the control of "safety critical processes". To examine this idea in QSA of the ATC systems, a Control-capacity Based Safety Assessment Framework (CBSAF) is developed which includes two control capacity metrics and a procedural method. The two metrics are Probabilistic System Control-capacity (PSC) and Temporal System Control-capacity (TSC); each addresses an aspect of a system's control capacity. And the procedural method consists three general stages: I) identification of safety critical processes, II) development of system control models and III) evaluation of system control capacity. The CBSAF was tested in two case studies. The first one assesses an en-route collision avoidance scenario and compares three hypothetical configurations. The CBSAF was able to capture the uncoordinated behavior between two means of control, as was observed in a historic midair collision accident. The second case study compares CBSAF with an existing risk based QSA method in assessing the safety benefits of introducing a runway incursion alert system. Similar conclusions are reached between the two methods, while the CBSAF has the advantage of simplicity and provides a new control-based perspective and interpretation to the assessments. The case studies are intended to investigate the
-
Safety Assessment of Alumina and Aluminum Hydroxide as Used in Cosmetics.
Becker, Lillian C; Boyer, Ivan; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-11-01
This is a safety assessment of alumina and aluminum hydroxide as used in cosmetics. Alumina functions as an abrasive, absorbent, anticaking agent, bulking agent, and opacifying agent. Aluminum hydroxide functions as a buffering agent, corrosion inhibitor, and pH adjuster. The Food and Drug Administration (FDA) evaluated the safe use of alumina in several medical devices and aluminum hydroxide in over-the-counter drugs, which included a review of human and animal safety data. The Cosmetic Ingredient Review (CIR) Expert Panel considered the FDA evaluations as part of the basis for determining the safety of these ingredients as used in cosmetics. Alumina used in cosmetics is essentially the same as that used in medical devices. This safety assessment does not include metallic or elemental aluminum as a cosmetic ingredient. The CIR Expert Panel concluded that alumina and aluminum hydroxide are safe in the present practices of use and concentration described in this safety assessment. © The Author(s) 2016.
-
Alkon, Abbey; Rose, Roberta; Wolff, Mimi; Kotch, Jonathan B; Aronson, Susan S
2016-01-01
The project aims were to (1) develop an observational Health and Safety Checklist to assess health and safety practices and conditions in early care and education (ECE) programs using Stepping Stones To Caring For Our Children, 3rd Edition national standards, (2) pilot test the Checklist, completed by nurse child care health consultants, to assess feasibility, ease of completion, objectivity, validity, and reliability, and (3) revise the Checklist based on the qualitative and quantitative results of the pilot study. The observable national health and safety standards were identified and then rated by health, safety, and child care experts using a Delphi technique to validate the standards as essential to prevent harm and promote health. Then, child care health consultants recruited ECE centers and pilot tested the 124-item Checklist. The pilot study was conducted in Arizona, California and North Carolina. The psychometric properties of the Checklist were assessed. The 37 participating ECE centers had 2627 children from ethnically-diverse backgrounds and primarily low-income families. The child care health consultants found the Checklist easy to complete, objective, and useful for planning health and safety interventions. The Checklist had content and face validity, inter-rater reliability, internal consistency, and concurrent validity. Based on the child care health consultant feedback and psychometric properties of the Checklist, the Checklist was revised and re-written at an 8th grade literacy level. The Health and Safety Checklist provides a standardized instrument of observable, selected national standards to assess the quality of health and safety in ECE centers.
-
Environment, Safety, and Health Self-Assessment Report, Fiscal Year 2008
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chernowski, John
2009-02-27
Lawrence Berkeley National Laboratory's Environment, Safety, and Health (ES&H) Self-Assessment Program ensures that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The Self-Assessment Program, managed by the Office of Contract Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The functions of the program are to ensure that work is conducted safely, and with minimal negative impact to workers, the public, and the environment. The Self-Assessment Program is also the mechanism used to institute continuous improvements to the Laboratory's ES&H programs. The program is described in LBNL/PUB 5344, Environment, Safety, andmore » Health Self-Assessment Program and is composed of four distinct assessments: the Division Self-Assessment, the Management of Environment, Safety, and Health (MESH) review, ES&H Technical Assurance, and the Appendix B Self-Assessment. The Division Self-Assessment uses the five core functions and seven guiding principles of ISM as the basis of evaluation. Metrics are created to measure performance in fulfilling ISM core functions and guiding principles, as well as promoting compliance with applicable regulations. The five core functions of ISM are as follows: (1) Define the Scope of Work; (2) Identify and Analyze Hazards; (3) Control the Hazards; (4) Perform the Work; and (5) Feedback and Improvement. The seven guiding principles of ISM are as follows: (1) Line Management Responsibility for ES&H; (2) Clear Roles and Responsibilities; (3) Competence Commensurate with Responsibilities; (4) Balanced Priorities; (5) Identification of ES&H Standards and Requirements; (6) Hazard Controls Tailored to the Work Performed; and (7) Operations Authorization. Performance indicators are developed by consensus with OCA, representatives from each division, and Environment, Health, and Safety (EH&S) Division program managers. Line management of each division performs the Division
-
Safety assessment of modified terephthalate polymers as used in cosmetics.
Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2014-01-01
The safety of 6 modified terephthalate polymers as cosmetic ingredients was assessed. These ingredients mostly function as exfoliants, bulking agents, hair fixatives, and viscosity-increasing agents-nonaqueous. Polyethylene terephthalate (PET) is used in leave-on products up to 100% and in rinse-off products up to 2%. The Cosmetic Ingredient Review Expert Panel (Panel) considered that the PET used in cosmetics is chemically equivalent to that used in medical devices. The Panel determined that the Food and Drug Administration's determination of safety of PET in several medical devices, which included human and animal safety data, can be used as the basis for the determination of safety of PET and related polymers used in cosmetics. Use studies of cosmetic eye products that contain PET demonstrated no ocular irritation or dermal sensitization. The Panel concluded that modified terephthalate polymers were safe as cosmetic ingredients in the practices of use and concentration described in this safety assessment. © The Author(s) 2014.
-
Simulating geriatric home safety assessments in a three-dimensional virtual world.
Andrade, Allen D; Cifuentes, Pedro; Mintzer, Michael J; Roos, Bernard A; Anam, Ramanakumar; Ruiz, Jorge G
2012-01-01
Virtual worlds could offer inexpensive and safe three-dimensional environments in which medical trainees can learn to identify home safety hazards. Our aim was to evaluate the feasibility, usability, and acceptability of virtual worlds for geriatric home safety assessments and to correlate performance efficiency in hazard identification with spatial ability, self-efficacy, cognitive load, and presence. In this study, 30 medical trainees found the home safety simulation easy to use, and their self-efficacy was improved. Men performed better than women in hazard identification. Presence and spatial ability were correlated significantly with performance. Educators should consider spatial ability and gender differences when implementing virtual world training for geriatric home safety assessments.
-
Safety assessment of genetically modified plants with deliberately altered composition
Halford, Nigel G; Hudson, Elizabeth; Gimson, Amy; Weightman, Richard; Shewry, Peter R; Tompkins, Steven
2014-01-01
The development and marketing of ‘novel’ genetically modified (GM) crops in which composition has been deliberately altered poses a challenge to the European Union (EU)'s risk assessment processes, which are based on the concept of substantial equivalence with a non-GM comparator. This article gives some examples of these novel GM crops and summarizes the conclusions of a report that was commissioned by the European Food Safety Authority on how the EU's risk assessment processes could be adapted to enable their safety to be assessed. PMID:24735114
-
Data collection and analysis for local roadway safety assessment.
DOT National Transportation Integrated Search
2014-11-01
The project Data Analysis for Local Roadway : Assessment conducted systematic road-safety : assessment and identified major risks that can be el : iminated or reduced by pr : actical road-improvement : measures. Specifically, the primary task o...
-
Ex-ante assessment of the safety effects of intelligent transport systems.
Kulmala, Risto
2010-07-01
There is a need to develop a comprehensive framework for the safety assessment of Intelligent Transport Systems (ITS). This framework should: (1) cover all three dimensions of road safety-exposure, crash risk and consequence, (2) cover, in addition to the engineering effect, also the effects due to behavioural adaptation and (3) be compatible with the other aspects of state of the art road safety theories. A framework based on nine ITS safety mechanisms is proposed and discussed with regard to the requirements set to the framework. In order to illustrate the application of the framework in practice, the paper presents a method based on the framework and the results from applying that method for twelve intelligent vehicle systems in Europe. The framework is also compared to two recent frameworks applied in the safety assessment of intelligent vehicle safety systems. Copyright 2010 Elsevier Ltd. All rights reserved.
-
Safety assessment guidance in the International Atomic Energy Agency RADWASS Program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vovk, I.F.; Seitz, R.R.
1995-12-31
The IAEA RADWASS programme is aimed at establishing a coherent and comprehensive set of principles and standards for the safe management of waste and formulating the guidelines necessary for their application. A large portion of this programme has been devoted to safety assessments for various waste management activities. Five Safety Guides are planned to be developed to provide general guidance to enable operators and regulators to develop necessary framework for safety assessment process in accordance with international recommendations. They cover predisposal, near surface disposal, geological disposal, uranium/thorium mining and milling waste, and decommissioning and environmental restoration. The Guide on safetymore » assessment for near surface disposal is at the most advanced stage of preparation. This draft Safety Guide contains guidance on description of the disposal system, development of a conceptual model, identification and description of relevant scenarios and pathways, consequence analysis, presentation of results and confidence building. The set of RADWASS publications is currently undergoing in-depth review to ensure a harmonized approach throughout the Safety Series.« less
-
Assessment of the safety of foods derived from genetically modified (GM) crops.
König, A; Cockburn, A; Crevel, R W R; Debruyne, E; Grafstroem, R; Hammerling, U; Kimber, I; Knudsen, I; Kuiper, H A; Peijnenburg, A A C M; Penninks, A H; Poulsen, M; Schauzu, M; Wal, J M
2004-07-01
This paper provides guidance on how to assess the safety of foods derived from genetically modified crops (GM crops); it summarises conclusions and recommendations of Working Group 1 of the ENTRANSFOOD project. The paper provides an approach for adapting the test strategy to the characteristics of the modified crop and the introduced trait, and assessing potential unintended effects from the genetic modification. The proposed approach to safety assessment starts with the comparison of the new GM crop with a traditional counterpart that is generally accepted as safe based on a history of human food use (the concept of substantial equivalence). This case-focused approach ensures that foods derived from GM crops that have passed this extensive test-regime are as safe and nutritious as currently consumed plant-derived foods. The approach is suitable for current and future GM crops with more complex modifications. First, the paper reviews test methods developed for the risk assessment of chemicals, including food additives and pesticides, discussing which of these methods are suitable for the assessment of recombinant proteins and whole foods. Second, the paper presents a systematic approach to combine test methods for the safety assessment of foods derived from a specific GM crop. Third, the paper provides an overview on developments in this area that may prove of use in the safety assessment of GM crops, and recommendations for research priorities. It is concluded that the combination of existing test methods provides a sound test-regime to assess the safety of GM crops. Advances in our understanding of molecular biology, biochemistry, and nutrition may in future allow further improvement of test methods that will over time render the safety assessment of foods even more effective and informative. Copryright 2004 Elsevier Ltd.
-
Assessment of elementary school safety restraint programs.
DOT National Transportation Integrated Search
1985-06-01
The purpose of this research was to identify elementary school (K-6) safety belt : education programs in use in the United States, to review their development, and : to make administrative and impact assessments of their use in selected States. : Six...
-
Ultraviolet safety assessments of insect light traps.
Sliney, David H; Gilbert, David W; Lyon, Terry
2016-01-01
Near-ultraviolet (UV-A: 315-400 nm), "black-light," electric lamps were invented in 1935 and ultraviolet insect light traps (ILTs) were introduced for use in agriculture around that time. Today ILTs are used indoors in several industries and in food-service as well as in outdoor settings. With recent interest in photobiological lamp safety, safety standards are being developed to test for potentially hazardous ultraviolet emissions. A variety of UV "Black-light" ILTs were measured at a range of distances to assess potential exposures. Realistic time-weighted human exposures are shown to be well below current guidelines for human exposure to ultraviolet radiation. These UV-A exposures would be far less than the typical UV-A exposure in the outdoor environment. Proposals are made for realistic ultraviolet safety standards for ILT products.
-
Safety Assessment of Acyl Glucuronides-A Simplified Paradigm.
Smith, Dennis A; Hammond, Timothy; Baillie, Thomas A
2018-06-01
While simple O - (ether-linked) and N -glucuronide drug conjugates generally are unreactive and considered benign from a safety perspective, the acyl glucuronides that derive from metabolism of carboxylic acid-containing xenobiotics can exhibit a degree of chemical reactivity that is dependent upon their molecular structure. As a result, concerns have arisen over the safety of acyl glucuronides as a class, several members of which have been implicated in the toxicity of their respective parent drugs. However, direct evidence in support of these claims remains sparse, and due to frequently encountered species differences in the systemic exposure to acyl glucuronides (both of the parent drug and oxidized derivatives thereof), coupled with their instability in aqueous media and potential to undergo chemical rearrangement (acyl migration), qualification of these conjugates by traditional safety assessment methods can be very challenging. In this Commentary, we discuss alternative (non-acyl glucuronide) mechanisms by which carboxylic acids may cause serious adverse reactions, and propose a novel, practical approach to compare systemic exposure to acyl glucuronide metabolites in humans to that in animal species used in preclinical safety assessment based on relative estimates of the total body burden of these circulating conjugates. Copyright © 2018 by The American Society for Pharmacology and Experimental Therapeutics.
-
A TIERED APPROACH TO LIFE STAGES TESTING FOR AGRICULTURAL CHEMICAL SAFETY ASSESSMENT
A proposal has been developed by the Agricultural Chemical Safety Assessment (ACSA) Technical Committee of the ILSI Health and Environmental Sciences Institute (HESI) for an improved approach to assessing the safety of crop protection chemicals. The goal is to ensure that studie...
-
Safety Assessment of Dialkyl Sulfosuccinate Salts as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-11-01
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 8 dialkyl sulfosuccinate salts for use in cosmetics, finding that these ingredients are safe in cosmetics in the present practices of use and concentration when formulated to be nonirritating. The dialkyl sulfosuccinate salts primarily function as surfactants in cosmetics. The Panel reviewed the new and existing available animal and clinical data in making its determination of safety. The Panel found it appropriate to extrapolate the data on diethylhexyl sodium sulfosuccinate to assess the safety of the entire group because all of the diesters are of a similar alkyl chain length, all are symmetrically substituted, and all have similar functions in cosmetic formulations. © The Author(s) 2016.
-
Assessment of patient safety culture in private and public hospitals in Peru.
Arrieta, Alejandro; Suárez, Gabriela; Hakim, Galed
2018-04-01
To assess the patient safety culture in Peruvian hospitals from the perspective of healthcare professionals, and to test for differences between the private and public healthcare sectors. Patient safety is defined as the avoidance and prevention of patient injuries or adverse events resulting from the processes of healthcare delivery. A non-random cross-sectional study conducted online. An online survey was administered from July to August 2016, in Peru. This study reports results from Lima and Callao, which are the capital and the port region of Peru. A total of 1679 healthcare professionals completed the survey. Participants were physicians, medical residents and nurses working in healthcare facilities from the private sector and public sector. Assessment of the degree of patient safety and 12 dimensions of patient safety culture in hospital units as perceived by healthcare professionals. Only 18% of healthcare professionals assess the degree of patient safety in their unit of work as excellent or very good. Significant differences are observed between the patient safety grades in the private sector (37%) compared to the public sub-sectors (13-15%). Moreover, in all patient safety culture dimensions, healthcare professionals from the private sector give more favorable responses for patient safety, than those from the public sub-systems. The most significant difference in support comes from patient safety administrators through communication and information about errors. Overall, the degree of patient safety in Peru is low, with significant gaps that exist between the private and the public sectors.
-
Post-earthquake building safety assessments for the Canterbury Earthquakes
Marshall, J.; Barnes, J.; Gould, N.; Jaiswal, K.; Lizundia, B.; Swanson, David A.; Turner, F.
2012-01-01
This paper explores the post-earthquake building assessment program that was utilized in Christchurch, New Zealand following the Canterbury Sequence of earthquakes beginning with the Magnitude (Mw.) 7.1 Darfield event in September 2010. The aftershocks or triggered events, two of which exceeded Mw 6.0, continued with events in February and June 2011 causing the greatest amount of damage. More than 70,000 building safety assessments were completed following the February event. The timeline and assessment procedures will be discussed including the use of rapid response teams, selection of indicator buildings to monitor damage following aftershocks, risk assessments for demolition of red-tagged buildings, the use of task forces to address management of the heavily damaged downtown area and the process of demolition. Through the post-event safety assessment program that occurred throughout the Canterbury Sequence of earthquakes, many important lessons can be learned that will benefit future response to natural hazards that have potential to damage structures.
-
Method of operator safety assessment for underground mobile mining equipment
NASA Astrophysics Data System (ADS)
Działak, Paulina; Karliński, Jacek; Rusiński, Eugeniusz
2018-01-01
The paper presents a method of assessing the safety of operators of mobile mining equipment (MME), which is adapted to current and future geological and mining conditions. The authors focused on underground mines, with special consideration of copper mines (KGHM). As extraction reaches into deeper layers of the deposit it can activate natural hazards, which, thus far, have been considered unusual and whose range and intensity are different depending on the field of operation. One of the main hazards that affect work safety and can become the main barrier in the exploitation of deposits at greater depths is climate threat. The authors have analysed the phenomena which may impact the safety of MME operators, with consideration of accidents that have not yet been studied and are not covered by the current safety standards for this group of miners. An attempt was made to develop a method for assessing the safety of MME operators, which takes into account the mentioned natural hazards and which is adapted to current and future environmental conditions in underground mines.
-
Safety assessment of discharge chute isolation barrier preparation and installation. Revision 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Meichle, R.H.
1994-10-10
This revision responds to RL comments and increases the discussion of the ``effective hazard categorization`` and the readiness review basis. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparison of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions were made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classification.
-
Ultraviolet safety assessments of insect light traps
Sliney, David H.; Gilbert, David W.; Lyon, Terry
2016-01-01
ABSTRACT Near-ultraviolet (UV-A: 315–400 nm), “black-light,” electric lamps were invented in 1935 and ultraviolet insect light traps (ILTs) were introduced for use in agriculture around that time. Today ILTs are used indoors in several industries and in food-service as well as in outdoor settings. With recent interest in photobiological lamp safety, safety standards are being developed to test for potentially hazardous ultraviolet emissions. A variety of UV “Black-light” ILTs were measured at a range of distances to assess potential exposures. Realistic time-weighted human exposures are shown to be well below current guidelines for human exposure to ultraviolet radiation. These UV-A exposures would be far less than the typical UV-A exposure in the outdoor environment. Proposals are made for realistic ultraviolet safety standards for ILT products. PMID:27043058
-
Validity of instruments to assess students' travel and pedestrian safety.
Mendoza, Jason A; Watson, Kathy; Baranowski, Tom; Nicklas, Theresa A; Uscanga, Doris K; Hanfling, Marcus J
2010-05-18
Safe Routes to School (SRTS) programs are designed to make walking and bicycling to school safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research validated the SRTS school travel survey and a pedestrian safety behavior checklist. Fourth grade students completed a brief written survey on how they got to school that day with set responses. Test-retest reliability was obtained 3-4 hours apart. Convergent validity of the SRTS travel survey was assessed by comparison to parents' report. For the measure of pedestrian safety behavior, 10 research assistants observed 29 students at a school intersection for completion of 8 selected pedestrian safety behaviors. Reliability was determined in two ways: correlations between the research assistants' ratings to that of the Principal Investigator (PI) and intraclass correlations (ICC) across research assistant ratings. The SRTS travel survey had high test-retest reliability (kappa = 0.97, n = 96, p < 0.001) and convergent validity (kappa = 0.87, n = 81, p < 0.001). The pedestrian safety behavior checklist had moderate reliability across research assistants' ratings (ICC = 0.48) and moderate correlation with the PI (r = 0.55, p = < 0.01). When two raters simultaneously used the instrument, the ICC increased to 0.65. Overall percent agreement (91%), sensitivity (85%) and specificity (83%) were acceptable. These validated instruments can be used to assess SRTS programs. The pedestrian safety behavior checklist may benefit from further formative work.
-
Validity of instruments to assess students' travel and pedestrian safety
2010-01-01
Background Safe Routes to School (SRTS) programs are designed to make walking and bicycling to school safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research validated the SRTS school travel survey and a pedestrian safety behavior checklist. Methods Fourth grade students completed a brief written survey on how they got to school that day with set responses. Test-retest reliability was obtained 3-4 hours apart. Convergent validity of the SRTS travel survey was assessed by comparison to parents' report. For the measure of pedestrian safety behavior, 10 research assistants observed 29 students at a school intersection for completion of 8 selected pedestrian safety behaviors. Reliability was determined in two ways: correlations between the research assistants' ratings to that of the Principal Investigator (PI) and intraclass correlations (ICC) across research assistant ratings. Results The SRTS travel survey had high test-retest reliability (κ = 0.97, n = 96, p < 0.001) and convergent validity (κ = 0.87, n = 81, p < 0.001). The pedestrian safety behavior checklist had moderate reliability across research assistants' ratings (ICC = 0.48) and moderate correlation with the PI (r = 0.55, p =< 0.01). When two raters simultaneously used the instrument, the ICC increased to 0.65. Overall percent agreement (91%), sensitivity (85%) and specificity (83%) were acceptable. Conclusions These validated instruments can be used to assess SRTS programs. The pedestrian safety behavior checklist may benefit from further formative work. PMID:20482778
-
Adverse Outcome Pathways can drive non-animal approaches for safety assessment
Burden, Natalie; Sewell, Fiona; Andersen, Melvin E; Boobis, Alan; Chipman, J Kevin; Cronin, Mark T D; Hutchinson, Thomas H; Kimber, Ian; Whelan, Maurice
2015-01-01
Adverse Outcome Pathways (AOPs) provide an opportunity to develop new and more accurate safety assessment processes for drugs and other chemicals, and may ultimately play an important role in regulatory decision making. Not only can the development and application of AOPs pave the way for the development of improved evidence-based approaches for hazard and risk assessment, there is also the promise of a significant impact on animal welfare, with a reduced reliance on animal-based methods. The establishment of a useable and coherent knowledge framework under which AOPs will be developed and applied has been a first critical step towards realizing this opportunity. This article explores how the development of AOPs under this framework, and their application in practice, could benefit the science and practice of safety assessment, while in parallel stimulating a move away from traditional methods towards an increased acceptance of non-animal approaches. We discuss here the key areas where current, and future initiatives should be focused to enable the translation of AOPs into routine chemical safety assessment, and lasting 3Rs benefits. © 2015 The Authors. Journal of Applied Toxicology published by John Wiley & Sons Ltd. This article explores how the development and application of Adverse Outcome Pathways (AOPs) could benefit the science and practice of chemical safety assessment, with a particular focus on how their use in practice could reduce reliance on traditional animal toxicity tests. This includes discussion of the key areas where current and future initiatives should be focused to enable the translation of AOPs into routine chemical safety assessment, and lasting 3Rs benefits. PMID:25943792
-
Frankel, Allan; Grillo, Sarah Pratt; Pittman, Mary; Thomas, Eric J; Horowitz, Lisa; Page, Martha; Sexton, Bryan
2008-01-01
Objective To evaluate the impact of rigorous WalkRounds on frontline caregiver assessments of safety climate, and to clarify the steps and implementation of rigorous WalkRounds. Data Sources/Study Setting Primary outcome variables were baseline and post WalkRounds safety climate scores from the Safety Attitudes Questionnaire (SAQ). Secondary outcomes were safety issues elicited through WalkRounds. Study period was August 2002 to April 2005; seven hospitals in Massachusetts agreed to participate; and the project was implemented in all patient care areas. Study Design Prospective study of the impact of rigorously applied WalkRounds on frontline caregivers assessments of safety climate in their patient care area. WalkRounds were conducted weekly and according to the seven-step WalkRounds Guide. The SAQ was administered at baseline and approximately 18 months post-WalkRounds implementation to all caregivers in patient care areas. Results Two of seven hospitals complied with the rigorous WalkRounds approach; hospital A was an academic teaching center and hospital B a community teaching hospital. Of 21 patient care areas, SAQ surveys were received from 62 percent of respondents at baseline and 60 percent post WalkRounds. At baseline, 10 of 21 care areas (48 percent) had safety climate scores below 60 percent, whereas post-WalkRounds three care areas (14 percent) had safety climate scores below 60 percent without improving by 10 points or more. Safety climate scale scores in hospital A were 62 percent at baseline and 77 percent post-WalkRounds (t=2.67, p=.03), and in hospital B were 46 percent at baseline and 56 percent post WalkRounds (t=2.06, p=.06). Main safety issues by category were equipment/facility (A [26 percent] and B [33 percent]) and communication (A [24 percent] and B [18 percent]). Conclusions WalkRounds implementation requires significant organizational will; sustainability requires outstanding project management and leadership engagement. In the patient
-
Review of quality assessment tools for the evaluation of pharmacoepidemiological safety studies
Neyarapally, George A; Hammad, Tarek A; Pinheiro, Simone P; Iyasu, Solomon
2012-01-01
Objectives Pharmacoepidemiological studies are an important hypothesis-testing tool in the evaluation of postmarketing drug safety. Despite the potential to produce robust value-added data, interpretation of findings can be hindered due to well-recognised methodological limitations of these studies. Therefore, assessment of their quality is essential to evaluating their credibility. The objective of this review was to evaluate the suitability and relevance of available tools for the assessment of pharmacoepidemiological safety studies. Design We created an a priori assessment framework consisting of reporting elements (REs) and quality assessment attributes (QAAs). A comprehensive literature search identified distinct assessment tools and the prespecified elements and attributes were evaluated. Primary and secondary outcome measures The primary outcome measure was the percentage representation of each domain, RE and QAA for the quality assessment tools. Results A total of 61 tools were reviewed. Most tools were not designed to evaluate pharmacoepidemiological safety studies. More than 50% of the reviewed tools considered REs under the research aims, analytical approach, outcome definition and ascertainment, study population and exposure definition and ascertainment domains. REs under the discussion and interpretation, results and study team domains were considered in less than 40% of the tools. Except for the data source domain, quality attributes were considered in less than 50% of the tools. Conclusions Many tools failed to include critical assessment elements relevant to observational pharmacoepidemiological safety studies and did not distinguish between REs and QAAs. Further, there is a lack of considerations on the relative weights of different domains and elements. The development of a quality assessment tool would facilitate consistent, objective and evidence-based assessments of pharmacoepidemiological safety studies. PMID:23015600
-
A 2-year study of patient safety competency assessment in 29 clinical laboratories.
Reed, Robyn C; Kim, Sara; Farquharson, Kara; Astion, Michael L
2008-06-01
Competency assessment is critical for laboratory operations and is mandated by the Clinical Laboratory Improvement Amendments of 1988. However, no previous reports describe methods for assessing competency in patient safety. We developed and implemented a Web-based tool to assess performance of 875 laboratory staff from 29 laboratories in patient safety. Question categories included workplace culture, categorizing error, prioritization of patient safety interventions, strength of specific interventions, and general patient safety concepts. The mean score was 85.0%, with individual scores ranging from 56% to 100% and scores by category from 81.3% to 88.6%. Of the most difficult questions (<72% correct), 6 were about intervention strength, 3 about categorizing error, 1 about workplace culture, and 1 about prioritization of interventions. Of the 13 questions about intervention strength, 6 (46%) were in the lowest quartile, suggesting that this may be a difficult topic for laboratory technologists. Computer-based competency assessments help laboratories identify topics for continuing education in patient safety.
-
Safety assessment for In-service Pressure Bending Pipe Containing Incomplete Penetration Defects
NASA Astrophysics Data System (ADS)
Wang, M.; Tang, P.; Xia, J. F.; Ling, Z. W.; Cai, G. Y.
2017-12-01
Incomplete penetration defect is a common defect in the welded joint of pressure pipes. While the safety classification of pressure pipe containing incomplete penetration defects, according to periodical inspection regulations in present, is more conservative. For reducing the repair of incomplete penetration defect, a scientific and applicable safety assessment method for pressure pipe is needed. In this paper, the stress analysis model of the pipe system was established for the in-service pressure bending pipe containing incomplete penetration defects. The local finite element model was set up to analyze the stress distribution of defect location and the stress linearization. And then, the applicability of two assessment methods, simplified assessment and U factor assessment method, to the assessment of incomplete penetration defects located at pressure bending pipe were analyzed. The results can provide some technical supports for the safety assessment of complex pipelines in the future.
-
Current issues and perspectives in food safety and risk assessment.
Eisenbrand, G
2015-12-01
In this review, current issues and opportunities in food safety assessment are discussed. Food safety is considered an essential element inherent in global food security. Hazard characterization is pivotal within the continuum of risk assessment, but it may be conceived only within a very limited frame as a true alternative to risk assessment. Elucidation of the mode of action underlying a given hazard is vital to create a plausible basis for human toxicology evaluation. Risk assessment, to convey meaningful risk communication, must be based on appropriate and reliable consideration of both exposure and mode of action. New perspectives, provided by monitoring human exogenous and endogenous exposure biomarkers, are considered of great promise to support classical risk extrapolation from animal toxicology. © The Author(s) 2015.
-
Safety analysis, risk assessment, and risk acceptance criteria
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jamali, K.; Stack, D.W.; Sullivan, L.H.
1997-08-01
This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities andmore » that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, `ensuring` plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is `safe.` Use of RACs requires quantitative estimates of consequence frequency and magnitude.« less
-
Using driving simulators to assess driving safety.
Boyle, Linda Ng; Lee, John D
2010-05-01
Changes in drivers, vehicles, and roadways pose substantial challenges to the transportation safety community. Crash records and naturalistic driving data are useful for examining the influence of past or existing technology on drivers, and the associations between risk factors and crashes. However, they are limited because causation cannot be established and technology not yet installed in production vehicles cannot be assessed. Driving simulators have become an increasingly widespread tool to understand evolving and novel technologies. The ability to manipulate independent variables in a randomized, controlled setting also provides the added benefit of identifying causal links. This paper introduces a special issue on simulator-based safety studies. The special issue comprises 25 papers that demonstrate the use of driving simulators to address pressing transportation safety problems and includes topics as diverse as neurological dysfunction, work zone design, and driver distraction. Copyright (c) 2010 Elsevier Ltd. All rights reserved.
-
INTERPRETING SPONTANEOUS RENAL LESIONS IN SAFETY AND RISK ASSESSMENT
Interpreting Spontaneous Renal Lesions in Safety and Risk Assessment
Douglas C. Wolf, D.V.M., Ph.D.
Introduction
Risk assessment is a process whereby the potential adverse health effects from exposure to a xenobiotic are predicted after evaluation of the availab... -
Surrogate Safety Assessment Model (SSAM)--software user manual
DOT National Transportation Integrated Search
2008-05-01
This document presents guidelines for the installation and use of the Surrogate Safety Assessment Model (SSAM) software. For more information regarding the SSAM application, including discussion of theoretical background and the results of a series o...
-
A Framework for Assessment of Aviation Safety Technology Portfolios
NASA Technical Reports Server (NTRS)
Jones, Sharon M.; Reveley, Mary S.
2014-01-01
The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.
-
Better understanding of toxicological mechanisms, enhanced testing capabilities, and demands for more sophisticated data for safety and health risk assessment have generated international interest in improving the current testing paradigm for agricultural chemicals. To address th...
-
Safety Assessment of Alkyl Ethylhexanoates as Used in Cosmetics.
Fiume, Monice; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-01-01
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 16 alkyl ethylhexanoates for use in cosmetics, concluding that these ingredients are safe in cosmetic formulations in the present practices of use and concentrations when formulated to be nonirritating. The alkyl ethylhexanoates primarily function as skin-conditioning agents in cosmetics. The highest concentration of use reported for any of the alkyl ethylhexanoates is 77.3% cetyl ethylhexanoate in rinse-off formulations used near the eye, and the highest leave-on use reported is 52% cetyl ethylhexanoate in lipstick formulations. The Panel reviewed available animal and clinical data related to these ingredients, and the similarities in structure, properties, functions, and uses of ingredients from previous CIR assessments on constituent alcohols that allowed for extrapolation of the available toxicological data to assess the safety of the entire group. © The Author(s) 2015.
-
Assessment of insurance incentives for safety belt usage
DOT National Transportation Integrated Search
1983-05-12
This study assesses the feasibility of insurance companies to offer incentives, in the form of premium reductions or additional benefits, which would be effective in increasing safety belt usage. The insurance types considered in this report are auto...
-
NASA Astrophysics Data System (ADS)
Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi
2017-06-01
Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.
-
A Microbial Assessment Scheme to measure microbial performance of Food Safety Management Systems.
Jacxsens, L; Kussaga, J; Luning, P A; Van der Spiegel, M; Devlieghere, F; Uyttendaele, M
2009-08-31
A Food Safety Management System (FSMS) implemented in a food processing industry is based on Good Hygienic Practices (GHP), Hazard Analysis Critical Control Point (HACCP) principles and should address both food safety control and assurance activities in order to guarantee food safety. One of the most emerging challenges is to assess the performance of a present FSMS. The objective of this work is to explain the development of a Microbial Assessment Scheme (MAS) as a tool for a systematic analysis of microbial counts in order to assess the current microbial performance of an implemented FSMS. It is assumed that low numbers of microorganisms and small variations in microbial counts indicate an effective FSMS. The MAS is a procedure that defines the identification of critical sampling locations, the selection of microbiological parameters, the assessment of sampling frequency, the selection of sampling method and method of analysis, and finally data processing and interpretation. Based on the MAS assessment, microbial safety level profiles can be derived, indicating which microorganisms and to what extent they contribute to food safety for a specific food processing company. The MAS concept is illustrated with a case study in the pork processing industry, where ready-to-eat meat products are produced (cured, cooked ham and cured, dried bacon).
-
Aligning the 3Rs with new paradigms in the safety assessment of chemicals.
Burden, Natalie; Mahony, Catherine; Müller, Boris P; Terry, Claire; Westmoreland, Carl; Kimber, Ian
2015-04-01
There are currently several factors driving a move away from the reliance on in vivo toxicity testing for the purposes of chemical safety assessment. Progress has started to be made in the development and validation of non-animal methods. However, recent advances in the biosciences provide exciting opportunities to accelerate this process and to ensure that the alternative paradigms for hazard identification and risk assessment deliver lasting 3Rs benefits, whilst improving the quality and relevance of safety assessment. The NC3Rs, a UK-based scientific organisation which supports the development and application of novel 3Rs techniques and approaches, held a workshop recently which brought together over 20 international experts in the field of chemical safety assessment. The aim of this workshop was to review the current scientific, technical and regulatory landscapes, and to identify key opportunities towards reaching these goals. Here, we consider areas where further strategic investment will need to be focused if significant impact on 3Rs is to be matched with improved safety science, and why the timing is right for the field to work together towards an environment where we no longer rely on whole animal data for the accurate safety assessment of chemicals.
-
Terrain Safety Assessment in Support of the Mars Science Laboratory Mission
NASA Technical Reports Server (NTRS)
Kipp, Devin
2012-01-01
In August 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry, Descent, and Landing (EDL) systems by delivering the largest and most capable rover to date to the surface of Mars. The process to select the MSL landing site took over five years and began with over 50 initial candidate sites from which four finalist sites were chosen. The four finalist sites were examined in detail to assess overall science merit, EDL safety, and rover traversability on the surface. Ultimately, the engineering assessments demonstrated a high level of safety and robustness at all four finalist sites and differences in the assessment across those sites were small enough that neither EDL safety nor rover traversability considerations could significantly discriminate among the final four sites. Thus the MSL landing site at Gale Crater was selected from among the four finalists primarily on the basis of science considerations.
-
Assessing Explosives Safety Risks, Deviations, And Consequences
2009-07-31
Technical Paper 23 31 July 2009 DDESB Assessing Explosives Safety Risks, Deviations, And Consequences ...Deviations, And Consequences 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER...and approaches to assist warfighters in executing their mission, conserving resources, and maximizing operational effectiveness . When mission risk
-
2016-12-01
i Classification | CG-926 RDC | author | audience | month year Preliminary Marine Safety Risk Assessment, Brandon Road Lock & Dam...No. 4. Title and Subtitle Preliminary Marine Safety Risk Assessment, Brandon Road Lock & Dam Invasive Species Control Measures 5. Report Date...safety due to proposed invasive species control measures located in the vicinity of the Brandon Road Lock and Dam (BRLD) Navigation Project on the
-
NASA Technical Reports Server (NTRS)
Zelkin, Natalie; Henriksen, Stephen
2011-01-01
This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.
-
Safety Assessment of Multi Purpose Small Payload Rack(MSPR)
NASA Astrophysics Data System (ADS)
Mizutani, Yoshinobu; Takada, Satomi; Murata, Kosei; Ozawa, Daisaku; Kobayashi, Ryoji; Nakamura, Yasuhiro
2010-09-01
We are reporting summary of preliminary safety assessment for Multi Purpose Small Payload Rack(MSPR), which is one of the micro gravity experiment facilities that are being developed for the 2nd phase JEM utilization(JEM: Japanese Experiment Module) that will be launched on H-II Transfer Vehicle(HTV) 2nd flight in 2011. MSPR is used for multi-purpose micro-g experiment providing experimental spaces and work stations. MSPR has three experimental spaces; first, there is a space called Work Volume(WV) with capacity volume of approximately 350 litters, in which multiple resources including electricity, communication, and moving image functions can be used. Within this space, installation of devices can be done by simple, prompt attachment by Velcro and pins with high degree of flexibility. Second, there is Small Experiment Area(SEA), with capacity volume of approximately 70 litters, in which electricity, communication, and moving image functions can also be used in the same way as WV. These spaces protect experiment devices and specimens from contingent loads by the crewmembers. Third, there is Work Bench with area of 0.5 square meters, on which can be used for maintenance, inspection and data operations of installed devices, etc. This bench can be stored in the rack during contingency. Chamber for Combustion Experiment(CCE) that is planned to be installed in WV is a pressure-resistant experimental container that can be used to seal hazardous materials from combustion experiments. This CCE has double sealing design in chamber itself, which resist gas leakage under normal the temperature and pressure. Electricity, communication, moving image function can be used in the same way as WV. JAXA Phase 2 Safety Review Panel(SRP) has been held in April, 2010. For safety analysis of MSPR, hazards were identified based on Fault Tree Analysis methodology and then these hazards were classified into either eight ISS standard-type hazards or eight unique-type hazards that requires
-
Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio
2008-12-15
The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.
-
International Harmonization of Food Safety Assessment of Pesticide Residues.
Ambrus, Árpád
2016-01-13
This paper summarizes the development of principles and methods applied within the program of the FAO/WHO Codex Alimentarius during the past 50 years for the safety assessment of pesticide residues in food and feed and establishing maximum residue limits (MRLs) to promote free international trade and assure the safety of consumers. The role of major international organizations in this process, the FAO capacity building activities, and some problematic areas that require special attention are briefly described.
-
ERIC Educational Resources Information Center
Carbone, Elena T.; Scarpati, Stanley E.; Pivarnik, Lori F.
2013-01-01
This article describes an innovative assessment tool designed to evaluate the effectiveness of a food safety skills curriculum for learners receiving special education services. As schools respond to the increased demand for training students with special needs about food safety, the need for effective curricula and tools is also increasing. A…
-
Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment
NASA Technical Reports Server (NTRS)
Ancel, Ersin; Shih, Ann T.
2014-01-01
NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.
-
Opportunities to Apply the 3Rs in Safety Assessment Programs
Sewell, Fiona; Edwards, Joanna; Prior, Helen; Robinson, Sally
2016-01-01
Abstract Before a potential new medicine can be administered to humans it is essential that its safety is adequately assessed. Safety assessment in animals forms an integral part of this process, from early drug discovery and initial candidate selection to the program of recommended regulatory tests in animals. The 3Rs (replacement, reduction, and refinement of animals in research) are integrated in the current regulatory requirements and expectations and, in the EU, provide a legal and ethical framework for in vivo research to ensure the scientific objectives are met whilst minimizing animal use and maintaining high animal welfare standards. Though the regulations are designed to uncover potential risks, they are intended to be flexible, so that the most appropriate approach can be taken for an individual product. This article outlines current and future opportunities to apply the 3Rs in safety assessment programs for pharmaceuticals, and the potential (scientific, financial, and ethical) benefits to the industry, across the drug discovery and development process. For example, improvements to, or the development of, novel, early screens (e.g., in vitro, in silico, or nonmammalian screens) designed to identify compounds with undesirable characteristics earlier in development have the potential to reduce late-stage attrition by improving the selection of compounds that require regulatory testing in animals. Opportunities also exist within the current regulatory framework to simultaneously reduce and/or refine animal use and improve scientific outcomes through improvements to technical procedures and/or adjustments to study designs. It is important that approaches to safety assessment are continuously reviewed and challenged to ensure they are science-driven and predictive of relevant effects in humans. PMID:28053076
-
Assessment of patient safety culture in Palestinian public hospitals.
Hamdan, Motasem; Saleem, Abed Alra'oof
2013-04-01
To assess the prevalent patient safety culture in Palestinian public hospitals. A cross-sectional design, Arabic translated version of the Hospital Survey on Patient Safety Culture was used. All the 11 general public hospitals in the West Bank. A total of 1460 clinical and non-clinical hospital staff. No. Twelve patient safety culture composites and 2 outcome variables (patient safety grade and events reported in the past year) were measured. Most of the participants were nurses and physicians (69.2%) with direct contact with patients (92%), mainly employed in medical/surgical units (55.1%). The patient safety composites with the highest positive scores were teamwork within units (71%), organizational learning and continuous improvement (62%) and supervisor/manager expectations and actions promoting patient safety (56%). The composites with the lowest scores were non-punitive response to error (17%), frequency of events reported (35%), communication openness (36%), hospital management support for patient safety (37%) and staffing (38%). Although 53.2% of the respondents did not report any event in the past year, 63.5% rated patient safety level as 'excellent/very good'. Significant differences in patient safety scores and outcome variables were found between hospitals of different size and in relation to staff positions and work hours. This study highlights the existence of a punitive and blame culture, under-reporting of events, lack of communication openness and inadequate management support that are key challenges for patient safe hospital care. The baseline survey results are valuable for designing and implementing the patient safety program and for measuring future progress.
-
Simulating Geriatric Home Safety Assessments in a Three-Dimensional Virtual World
ERIC Educational Resources Information Center
Andrade, Allen D.; Cifuentes, Pedro; Mintzer, Michael J.; Roos, Bernard A.; Anam, Ramanakumar; Ruiz, Jorge G.
2012-01-01
Virtual worlds could offer inexpensive and safe three-dimensional environments in which medical trainees can learn to identify home safety hazards. Our aim was to evaluate the feasibility, usability, and acceptability of virtual worlds for geriatric home safety assessments and to correlate performance efficiency in hazard identification with…
-
The in-depth safety assessment (ISA) pilot projects in Ukraine.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kot, C. A.
1998-02-10
Ukraine operates pressurized water reactors of the Soviet-designed type, VVER. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs). After approval of the SARS by the Ukrainian Nuclear Regulatory Authority, the plants will be granted longer-term operating licenses. In September 1995, the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine issued a new contents requirement for the safety analysis reports of VVERs in Ukraine. It contains requirements in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. Themore » DBA requirements are an expanded version of the older SAR requirements. The last two requirements, on PRA and BDBA, are new. The US Department of Energy (USDOE), through the International Nuclear Safety Program (INSP), has initiated an assistance and technology transfer program to Ukraine to assist their nuclear power stations in developing a Western-type technical basis for the new SARS. USDOE sponsored In-Depth Safety Assessments (ISAs) have been initiated at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1. USDOE/INSP have structured the ISA program in such a way as to provide maximum assistance and technology transfer to Ukraine while encouraging and supporting the Ukrainian plants to take the responsibility and initiative and to perform the required assessments.« less
-
Portable Nanoparticle-Based Sensors for Food Safety Assessment
Bülbül, Gonca; Hayat, Akhtar; Andreescu, Silvana
2015-01-01
The use of nanotechnology-derived products in the development of sensors and analytical measurement methodologies has increased significantly over the past decade. Nano-based sensing approaches include the use of nanoparticles (NPs) and nanostructures to enhance sensitivity and selectivity, design new detection schemes, improve sample preparation and increase portability. This review summarizes recent advancements in the design and development of NP-based sensors for assessing food safety. The most common types of NPs used to fabricate sensors for detection of food contaminants are discussed. Selected examples of NP-based detection schemes with colorimetric and electrochemical detection are provided with focus on sensors for the detection of chemical and biological contaminants including pesticides, heavy metals, bacterial pathogens and natural toxins. Current trends in the development of low-cost portable NP-based technology for rapid assessment of food safety as well as challenges for practical implementation and future research directions are discussed. PMID:26690169
-
Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software
NASA Technical Reports Server (NTRS)
Graydon, Patrick J.; Holloway, C. Michael
2015-01-01
We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.
-
Brann, Maria; Mullins, Samantha Hope; Miller, Beverly K; Eoff, Shane; Graham, James; Aitken, Mary E
2012-08-01
Millions of all-terrain vehicles (ATV) are used around the world for recreation by both adults and youth. This increase in use has led to a substantial increase in the number of injuries and fatalities each year. Effective strategies for reducing this incidence are clearly needed; however, minimal research exists regarding effective educational interventions. This study was designed to assess rural ATV riders' preferences for and assessment of safety messages. 13 focus group discussions with youth and adult ATV riders were conducted. 88 formative research participants provided feedback on existing ATV safety materials, which was used to develop more useful ATV safety messages. 60 evaluative focus group participants critiqued the materials developed for this project. Existing ATV safety materials have limited effectiveness, in part because they may not address the content or design needs of the target population. ATV riders want educational and action-oriented safety messages that inform youth and adult riders about their responsibilities to learn, educate and implement safety behaviours (eg, appropriate-sized ATV, safety gear, solo riding, speed limits, riding locations). In addition, messages should be clear, realistic, visually appealing and easily accessible. Newly designed ATV safety materials using the acronym TRIPSS (training, ride off-road, impairment, plan ahead, safety gear, single rider) meet ATV riders' safety messaging needs. To reach a target population, it is crucial to include them in the development and assessment of safety messages. Germane to this particular study, ATV riders provided essential information for creating useful ATV safety materials.
-
LNG safety assessment evaluation methods : task 3 letter report.
DOT National Transportation Integrated Search
2016-07-01
Sandia National Laboratories evaluated published safety assessment methods across a variety of industries including Liquefied Natural Gas (LNG), hydrogen, land and marine transportation, as well as the US Department of Defense (DOD). All the methods ...
-
Liao, Joshua M; Etchegaray, Jason M; Williams, S Tyler; Berger, David H; Bell, Sigall K; Thomas, Eric J
2014-02-01
To develop and test the psychometric properties of a survey to measure students' perceptions about patient safety as observed on clinical rotations. In 2012, the authors surveyed 367 graduating fourth-year medical students at three U.S. MD-granting medical schools. They assessed the survey's reliability and construct and concurrent validity. They examined correlations between students' perceptions of organizational cultural factors, organizational patient safety measures, and students' intended safety behaviors. They also calculated percent positive scores for cultural factors. Two hundred twenty-eight students (62%) responded. Analyses identified five cultural factors (teamwork culture, safety culture, error disclosure culture, experiences with professionalism, and comfort expressing professional concerns) that had construct validity, concurrent validity, and good reliability (Cronbach alphas > 0.70). Across schools, percent positive scores for safety culture ranged from 28% (95% confidence interval [CI], 13%-43%) to 64% (30%-98%), while those for teamwork culture ranged from 47% (32%-62%) to 74% (66%-81%). They were low for error disclosure culture (range: 10% [0%-20%] to 27% [20%-35%]), experiences with professionalism (range: 7% [0%-15%] to 23% [16%-30%]), and comfort expressing professional concerns (range: 17% [5%-29%] to 38% [8%-69%]). Each cultural factor correlated positively with perceptions of overall patient safety as observed in clinical rotations (r = 0.37-0.69, P < .05) and at least one safety behavioral intent item. This study provided initial evidence for the survey's reliability and validity and illustrated its applicability for determining whether students' clinical experiences exemplify positive patient safety environments.
-
Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat
2013-09-01
The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.
-
A Practical Risk Assessment Methodology for Safety-Critical Train Control Systems
DOT National Transportation Integrated Search
2009-07-01
This project proposes a Practical Risk Assessment Methodology (PRAM) for analyzing railroad accident data and assessing the risk and benefit of safety-critical train control systems. This report documents in simple steps the algorithms and data input...
-
Safety assessment of foods from genetically modified crops in countries with developing economies.
Delaney, Bryan
2015-12-01
Population growth particularly in countries with developing economies will result in a need to increase food production by 70% by the year 2050. Biotechnology has been utilized to produce genetically modified (GM) crops for insect and weed control with benefits including increased crop yield and will also be used in emerging countries. A multicomponent safety assessment paradigm has been applied to individual GM crops to determine whether they as safe as foods from non-GM crops. This paper reviews methods to assess the safety of foods from GM crops for safe consumption from the first generation of GM crops. The methods can readily be applied to new products developed within country and this paper will emphasize the concept of data portability; that safety data produced in one geographic location is suitable for safety assessment regardless of where it is utilized. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.
-
Use of evidential reasoning and AHP to assess regional industrial safety.
Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Yang, Zaili; Ji, Xuewei; Zhou, Yi; Zhang, Hui
2018-01-01
China's fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others.
-
Safety assessment in the urban park environment in Alborz Province, Iran.
Oostakhan, Morteza; Babaei, Aliakbar
2013-01-01
Urban parks, as one of the recreational and sports sectors, could cause serious injuries among different ages if the safety issues in their design are not considered. These injuries can result from the equipment in the park, including play and sports equipment, or even from environmental factors, too. Lack of safety benchmark in parks will impact on the development of future proposals. In this article, attempts are made to survey the important safety factors in the urban parks including playgrounds, fitness equipment, pedestrian surface and environmental factors into a risk assessment. Hence, a checklist of safety factors was used. A Yes or No descriptor was allocated to any factor for determining safety level. The study also suggests recommendations for future planning concerning existing failures for designers. It was found that the safety level of the regional and local parks differ from each other.
-
Food and Feed Safety Assessment: The Importance of Proper Sampling.
Kuiper, Harry A; Paoletti, Claudia
2015-03-24
The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.
-
Food and feed safety assessment: the importance of proper sampling.
Kuiper, Harry A; Paoletti, Claudia
2015-01-01
The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.
-
Development and application of a safety assessment methodology for waste disposals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Little, R.H.; Torres, C.; Schaller, K.H.
1996-12-31
As part of a European Commission funded research programme, QuantiSci (formerly the Environmental Division of Intera Information Technologies) and Instituto de Medio Ambiente of the Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (IMA/CIEMAT) have developed and applied a comprehensive, yet practicable, assessment methodology for post-disposal safety assessment of land-based disposal facilities. This Safety Assessment Comparison (SACO) Methodology employs a systematic approach to the collection, evaluation and use of waste and disposal system data. It can be used to assess engineered barrier performance, the attenuating properties of host geological formations, and the long term impacts of a facility on the environmentmore » and human health, as well as allowing the comparison of different disposal options for radioactive, mixed and non-radioactive wastes. This paper describes the development of the methodology and illustrates its use.« less
-
Biomarkers: Dynamic "Tools" for Health and Safety Risk Assessment
Today informational flow from biomarkers contributes importantly to various types of health effects research, risk assessment and risk management decisions that impact, or have the potential to impact, public health and safety. Therefore, dependent upon the nature of the health r...
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Haverkamp, B.; Krone, J.; Shybetskyi, I.
The Radioactive Waste Disposal Facility (RWDF) Buryakovka was constructed in 1986 as part of the intervention measures after the accident at Chernobyl NPP (ChNPP). Today, RWDF Buryakovka is still being operated but its maximum capacity is nearly reached. Plans for enlargement of the facility exist since more than 10 years but have not been implemented yet. In the framework of an European Commission Project DBE Technology GmbH prepared a safety analysis report of the facility in its current state (SAR) and a preliminary safety analysis report (PSAR) based on the planned enlargement. Due to its history RWDF Buryakovka does notmore » fully comply with today's best international practices and the latest Ukrainian regulations in this area. The most critical aspects are its inventory of long-lived radionuclides, and the non-existent multi-barrier waste confinement system. A significant part of the project was dedicated, therefore, to the development of a methodology for the safety assessment taking into consideration the facility's special situation and to reach an agreement with all stakeholders involved in the later review and approval procedure of the safety analysis reports. Main aspect of the agreed methodology was to analyze the safety, not strictly based on regulatory requirements but on the assessment of the actual situation of the facility including its location within the Exclusion Zone. For both safety analysis reports, SAR and PSAR, the assessment of the long-term safety led to results that were either within regulatory limits or within the limits allowing for a specific situational evaluation by the regulator. (authors)« less
-
Urban transport safety assessment in akure based on corresponding performance indicators
NASA Astrophysics Data System (ADS)
Oye, Adedamola; Aderinlewo, Olufikayo; Croope, Silvana
2013-03-01
The level of safety of the transportation system in Akure, Nigeria was assessed by identifying the associated road safety problems and developing the corresponding safety performance indicators. These indicators were analysed with respect to accidents that occurred within the city from the year 2005 to 2009 based on the corresponding attributable risk measures. The results of the analysis showed the state of existing safety programs in Akure town. Six safety performance indicators were identified namely alcohol and drug use, excessive speeds, protection system (use of seat belts and helmets), use of day time running lights, state of vehicles (passive safety) and road condition. These indicators were used to determine the percentage of injury accidents as follows: 83.33% and 86.36% for years 2005 and 2006 respectively, 81.46% for year 2007 while years 2008 and 2009 had 82.86% and 78.12% injury accidents respectively.
-
Rappaport, Nancy; Pollack, William S; Flaherty, Lois T; Schwartz, Sarah E O; McMickens, Courtney
2015-04-01
This article presents an overview of a comprehensive school safety assessment approach for students whose behavior raises concern about their potential for targeted violence. Case vignettes highlight the features of 2 youngsters who exemplify those seen, the comprehensive nature of the assessment, and the kind of recommendations that enhance a student's safety, connection, well-being; engage families; and share responsibility of assessing safety with the school. Copyright © 2015 Elsevier Inc. All rights reserved.
-
Use of evidential reasoning and AHP to assess regional industrial safety
Chen, Zhichao; Chen, Tao; Qu, Zhuohua; Ji, Xuewei; Zhou, Yi; Zhang, Hui
2018-01-01
China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. PMID:29795593
-
Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O
2009-04-01
To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)'s patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Information abstracted from proposals for projects funded in AHRQ's patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. The 234 projects funded through AHRQ's patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. The projects funded in AHRQ's patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results
-
Error disclosure: a new domain for safety culture assessment.
Etchegaray, Jason M; Gallagher, Thomas H; Bell, Sigall K; Dunlap, Ben; Thomas, Eric J
2012-07-01
To (1) develop and test survey items that measure error disclosure culture, (2) examine relationships among error disclosure culture, teamwork culture and safety culture and (3) establish predictive validity for survey items measuring error disclosure culture. All clinical faculty from six health institutions (four medical schools, one cancer centre and one health science centre) in The University of Texas System were invited to anonymously complete an electronic survey containing questions about safety culture and error disclosure. The authors found two factors to measure error disclosure culture: one factor is focused on the general culture of error disclosure and the second factor is focused on trust. Both error disclosure culture factors were unique from safety culture and teamwork culture (correlations were less than r=0.85). Also, error disclosure general culture and error disclosure trust culture predicted intent to disclose a hypothetical error to a patient (r=0.25, p<0.001 and r=0.16, p<0.001, respectively) while teamwork and safety culture did not predict such an intent (r=0.09, p=NS and r=0.12, p=NS). Those who received prior error disclosure training reported significantly higher levels of error disclosure general culture (t=3.7, p<0.05) and error disclosure trust culture (t=2.9, p<0.05). The authors created and validated a new measure of error disclosure culture that predicts intent to disclose an error better than other measures of healthcare culture. This measure fills an existing gap in organisational assessments by assessing transparent communication after medical error, an important aspect of culture.
-
NASA Technical Reports Server (NTRS)
Graydon, Patrick J.; Holloway, C. M.
2015-01-01
Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.
-
DEVELOPMENT OF ADME DATA IN AGRICULTURAL CHEMICAL SAFETY ASSESSMENTS
DEVELOPMENT OF ADME DATA IN AGRICULTURAL CHEMICAL SAFETY ASSESSMENTS
Pastoor, Timothy1, Barton, Hugh2
1 Syngenta Crop Protection, Greensboro, NC, USA.
2 EPA, Office of Research and Development-NHEERL, RTP, NC, USA.
A multi-stakeholder series of discussions d... -
Fan, Qixiang; Qiang, Maoshan
2014-01-01
The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns. PMID:25114958
-
Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan
2014-01-01
The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.
-
Salgado, Ana; Gonçalves, Lídia; Pinto, Pedro C.; Urbano, Manuela; Ribeiro, Helena M.
2013-01-01
It is of crucial importance to evaluate the safety profile of the ingredients used in dermatological emulsions. A suitable equilibrium between safety and efficacy is a pivotal concern before the marketing of a dermatological product. The aim was to assess the safety and biological effects of a new cold processed silicone-based emulsion (SilEmulsion). The hazard, exposure, and dose-response assessment were used to characterize the risk for each ingredient. EpiSkin assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the SilEmulsion was studied using biophysical measurements in human volunteers during 21 days. According to the safety assessment of the ingredients, 1,5-pentanediol was an ingredient of special concern since its margin of safety was below the threshold of 100 (36.53). EpiSkin assay showed that the tissue viability after the application of the SilEmulsion was 92 ± 6% and, thus considered nonirritant to the skin. The human studies confirmed that the SilEmulsion was not a skin irritant and did not induce any sensitization on the volunteers, being safe for human use. Moreover, biological effects demonstrated that the SilEmulsion increased both the skin hydration and skin surface lipids. PMID:24294598
-
Raposo, Sara; Salgado, Ana; Gonçalves, Lídia; Pinto, Pedro C; Urbano, Manuela; Ribeiro, Helena M
2013-01-01
It is of crucial importance to evaluate the safety profile of the ingredients used in dermatological emulsions. A suitable equilibrium between safety and efficacy is a pivotal concern before the marketing of a dermatological product. The aim was to assess the safety and biological effects of a new cold processed silicone-based emulsion (SilEmulsion). The hazard, exposure, and dose-response assessment were used to characterize the risk for each ingredient. EpiSkin assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the SilEmulsion was studied using biophysical measurements in human volunteers during 21 days. According to the safety assessment of the ingredients, 1,5-pentanediol was an ingredient of special concern since its margin of safety was below the threshold of 100 (36.53). EpiSkin assay showed that the tissue viability after the application of the SilEmulsion was 92 ± 6% and, thus considered nonirritant to the skin. The human studies confirmed that the SilEmulsion was not a skin irritant and did not induce any sensitization on the volunteers, being safe for human use. Moreover, biological effects demonstrated that the SilEmulsion increased both the skin hydration and skin surface lipids.
-
Environment, Safety and Health Self-Assessment Report Fiscal Year 2010
DOE Office of Scientific and Technical Information (OSTI.GOV)
Robinson, Scott
2011-03-23
The Lawrence Berkeley National Laboratory (LBNL) Environment, Safety, and Health (ES&H) Self-Assessment Program was established to ensure that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The ES&H Self-Assessment Program, managed by the Office of Contractor Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The primary objective of the program is to ensure that work is conducted safely and with minimal negative impact to workers, the public, and the environment. Self-assessment follows the five core functions and guiding principles of ISM. Self-assessment is the mechanism used to promote the continuousmore » improvement of the Laboratory's ES&H programs. The process is described in the Environment, Safety, and Health Assurance Plan (PUB-5344) and is composed of three types of self-assessments: Division ES&H Self-Assessment, ES&H Technical Assurance Program Assessment, and Division ES&H Peer Review. The Division ES&H Self-Assessment Manual (PUB-3105) provides the framework by which divisions conduct formal ES&H self-assessments to systematically identify program deficiencies. Issue-specific assessments are designed and implemented by the divisions and focus on areas of interest to division management. They may be conducted by teams and involve advance planning to ensure that appropriate resources are available. The ES&H Technical Assurance Program Manual (PUB-913E) provides the framework for systematic reviews of ES&H programs and processes. The ES&H Technical Assurance Program Assessment is designed to evaluate whether ES&H programs and processes are compliant with guiding regulations, are effective, and are properly implemented by LBNL divisions. The Division ES&H Peer Review Manual provides the framework by which division ISM systems are evaluated and improved. Peer Reviews are conducted by teams under the direction of senior division management and focus on higher
-
Risk Assessment in the UK Health and Safety System: Theory and Practice.
Russ, Karen
2010-09-01
In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP). How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.
-
Safety Assessment of Microbial Polysaccharide Gums as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-07-01
The Cosmetic Ingredient Review Expert Panel assessed the safety of 34 microbial polysaccharide gums for use in cosmetics, finding that these ingredients are safe in cosmetic formulations in the present practices of use and concentration. The microbial polysaccharide gums named in this report have a variety of reported functions in cosmetics, including emulsion stabilizer, film former, binder, viscosity-increasing agent, and skin-conditioning agent. The Panel reviewed available animal and clinical data in making its determination of safety. © The Author(s) 2016.
-
Safety Assessment of Panax spp Root-Derived Ingredients as Used in Cosmetics.
Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-01-01
The Cosmetic Ingredient Review Expert Panel (Panel) reviewed the safety of 13 Panax spp root-derived ingredients as used in cosmetics. Panax "spp" indicates that multiple species within the genus are used in cosmetics, but not all species within that genus. Four species are being considered in this safety assessment. These ingredients function mostly as skin-conditioning agents-miscellaneous, fragrance ingredients, skin-conditioning agents-humectant, skin-conditioning agents-emollient, and cosmetic astringents. The Panel reviewed available data related to these ingredients and addressed the issue of pulegone, a constituent of these ingredients and other ingredients, such as peppermint oil. The Panel concluded that these Panax spp root-derived ingredients are safe in the practices of use and concentration as given in this safety assessment. © The Author(s) 2015.
-
Assessing safety of herbal products for menopausal complaints: an international perspective.
Dog, Tieraona Low; Marles, Robin; Mahady, Gail; Gardiner, Paula; Ko, Richard; Barnes, Jo; Chavez, Mary L; Griffiths, James; Giancaspro, Gabriel; Sarma, Nandakumara D
2010-08-01
Future research of herbal products for menopausal women should include long-term safety assessments because women may use these products for prolonged periods of time. Growing numbers of women take prescription medications and concurrently use herbal products for alleviation of menopausal symptoms. Because of possible herb-drug interactions, both drug and supplement manufacturers should provide basic pharmacokinetic data to reduce the risk of adverse interactions. In addition, herbal products produced to high quality standards are essential for ensuring consumer safety. Regulatory frameworks must be in place to ensure that herbal ingredients' identities have been verified, that they have been properly quantified per unit dose, that the product is within tolerance limits for contaminants, that the product's safety and effectiveness under the recommended conditions of use have been assessed before sale to the public, and that a system is in place to detect and deal with adverse reactions when they arise. This article explores these and related concerns. Copyright 2010. Published by Elsevier Ireland Ltd.
-
Safety Assessment of Alkyl PEG/PPG Ethers as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-07-01
The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of 131 alkyl polyethylene glycol (PEG)/polypropylene glycol ethers as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration described in this safety assessment when formulated to be nonirritating. Most of the alkyl PEG/PPG ethers included in this review are reported to function in cosmetics as surfactants, skin-conditioning agents, and/or emulsifying agents. The alkyl PEG/PPG ethers share very similar physiochemical properties as the alkyl PEG ethers, which were reviewed previously by the CIR Expert Panel and found safe when formulated to be nonirritating. The alkyl PEG ethers differ by the inclusion of PPG repeat units, which are used to fine-tune the surfactant properties of this group. The Panel relied heavily on data on analogous ingredients, extracted from the alkyl PEG ethers and PPG reports, when making its determination of safety. © The Author(s) 2016.
-
Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O
2009-01-01
Objective To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)' patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Data Sources Information abstracted from proposals for projects funded in AHRQ' patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. Study Design This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. Principal Findings The 234 projects funded through AHRQ' patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. Conclusions The projects funded in AHRQ' patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results. PMID:21456108
-
Xia, Nini; Griffin, Mark A; Wang, Xueqing; Liu, Xing; Wang, Dan
2018-06-01
Individual safety performance (behavior) critically influences safety outcomes in high-risk workplaces. Compared to the study of generic work performance on different measurements, few studies have investigated different measurements of safety performance, typically relying on employees' self-reflection of their safety behavior. This research aims to address this limitation by including worker self-reflection and other (i.e., supervisor) assessment of two worker safety performance dimensions, safety compliance and safety participation. A sample of 105 workers and 17 supervisors in 17 groups in the Chinese construction industry participated in this study. Comparisons were made between worker compliance and participation in each measurement, and between workers' and supervisors' assessment of workers' compliance and participation. Multilevel modeling was adopted to test the moderating effects on the worker self-reflection and supervisor-assessment relationship by group safety climate and the work experience of supervisors. Higher levels of safety compliance than participation were found for self-reflection and supervisor assessment. The discrepancy between the two measurements in each safety performance dimension was significant. The work experience of supervisors attenuated the discrepancy between self- and supervisor-assessment of compliance. Contrary to our expectations, the moderating effect of group safety climate was not supported. The discrepancy between worker self- and supervisor-assessment of worker safety performance, thus, suggests the importance of including alternative measurements of safety performance in addition to self-reflection. Lower levels of participation behavior in both raters suggest more research on the motivators of participatory behavior. Practical applications The discrepancy between different raters can lead to negative reactions of ratees, suggesting that managers should be aware of that difference. Assigning experienced supervisors as
-
Guide for the Development of Safety Assessment Report (SAR)
1987-08-01
Di ’:t ib ityioe I A,;!i~abiiity Codes Dist SpdIt ora bloe INSia OEapy r TABLE OF CONTENTS PAGE III SAFETY ASSESSMENT REPORT...above. Potential hazards associated with the maintenance of the turbine engine (i.e., use of cleaning agents ) are not addressed .in the accompanying
-
A probability-based approach for assessment of roadway safety hardware.
DOT National Transportation Integrated Search
2017-03-14
This report presents a general probability-based approach for assessment of roadway safety hardware (RSH). It was achieved using a reliability : analysis method and computational techniques. With the development of high-fidelity finite element (FE) m...
-
Dzingirayi, Garikayi; Korsten, Lise
2016-07-01
Growing global consumer concern over food safety in the fresh produce industry requires producers to implement necessary quality assurance systems. Varying effectiveness has been noted in how countries and food companies interpret and implement food safety standards. A diagnostic instrument (DI) for global fresh produce industries was developed to measure the compliancy of companies with implemented food safety standards. The DI is made up of indicators and descriptive grids for context factors and control and assurance activities to measure food safety output. The instrument can be used in primary production to assess food safety performance. This study applied the DI to measure food safety standard compliancy of mushroom farming in South Africa. Ten farms representing almost half of the industry farms and more than 80% of production were independently assessed for their horticultural safety management system (HSMS) compliance via in-depth interviews with each farm's quality assurance personnel. The data were processed using Microsoft Office Excel 2010 and are represented in frequency tables. The diagnosis revealed that the mushroom farming industry had an average food safety output. The farms were implementing an average-toadvanced HSMS and operating in a medium-risk context. Insufficient performance areas in HSMSs included inadequate hazard analysis and analysis of control points, low specificity of pesticide assessment, and inadequate control of suppliers and incoming materials. Recommendations to the industry and current shortcomings are suggested for realization of an improved industry-wide food safety assurance system.
-
Bradshaw, Catherine P; Milam, Adam J; Furr-Holden, C Debra M; Johnson, Sarah Lindstrom
2015-12-01
School safety is of great concern for prevention researchers, school officials, parents, and students, yet there are a dearth of assessments that have operationalized school safety from an organizational framework using objective tools and measures. Such a tool would be important for deriving unbiased assessments of the school environment, which in turn could be used as an evaluative tool for school violence prevention efforts. The current paper presents a framework for conceptualizing school safety consistent with Crime Prevention through Environmental Design (CPTED) model and social disorganization theory, both of which highlight the importance of context as a driver for adolescents' risk for involvement in substance use and violence. This paper describes the development of a novel observational measure, called the School Assessment for Environmental Typology (SAfETy), which applies CPTED and social disorganizational frameworks to schools to measure eight indicators of school physical and social environment (i.e., disorder, trash, graffiti/vandalism, appearance, illumination, surveillance, ownership, and positive behavioral expectations). Drawing upon data from 58 high schools, we provide preliminary data regarding the validity and reliability of the SAfETy and describe patterns of the school safety indicators. Findings demonstrate the reliability and validity of the SAfETy and are discussed with regard to the prevention of violence in schools.
-
A measurement tool to assess culture change regarding patient safety in hospital obstetrical units.
Kenneth Milne, J; Bendaly, Nicole; Bendaly, Leslie; Worsley, Jill; FitzGerald, John; Nisker, Jeff
2010-06-01
Clinical error in acute care hospitals can only be addressed by developing a culture of safety. We sought to develop a cultural assessment survey (CAS) to assess patient safety culture change in obstetrical units. Interview prompts and a preliminary questionnaire were developed through a literature review of patient safety and "high reliability organizations," followed by interviews with members of the Managing Obstetrical Risk Efficiently (MOREOB) Program of the Society of Obstetricians and Gynaecologists of Canada. Three hundred preliminary questionnaires were mailed, and 21 interviews and 9 focus groups were conducted with the staff of 11 hospital sites participating in the program. To pilot test the CAS, 350 surveys were mailed to staff in participating hospitals, and interviews were conducted with seven nurses and five physicians who had completed the survey. Reliability analysis was conducted on four units that completed the CAS prior to and following the implementation of the first MOREOB module. Nineteen values and 105 behaviours, practices, and perceptions relating to patient safety were identified and included in the preliminary questionnaire, of which 143 of 300 (47.4%) were returned. Among the 220 cultural assessment surveys returned (62.9%), six cultural scales emerged: (1) patient safety as everyone's priority; (2) teamwork; (3) valuing individuals; (4) open communication; (5) learning; and (6) empowering individuals. The reliability analysis found all six scales to have internal reliability (Cronbach alpha), ranging from 0.72 (open communication) to 0.84 (valuing individuals). The CAS developed for this study may enable obstetrical units to assess change in patient safety culture.
-
Epidemiological designs for vaccine safety assessment: methods and pitfalls.
Andrews, Nick
2012-09-01
Three commonly used designs for vaccine safety assessment post licensure are cohort, case-control and self-controlled case series. These methods are often used with routine health databases and immunisation registries. This paper considers the issues that may arise when designing an epidemiological study, such as understanding the vaccine safety question, case definition and finding, limitations of data sources, uncontrolled confounding, and pitfalls that apply to the individual designs. The example of MMR and autism, where all three designs have been used, is presented to help consider these issues. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.
-
DOT National Transportation Integrated Search
1983-04-01
This document (Volume One of a Two Volume Report) describes the development of a paper-and-pencil instrument for assessing the safety relevance of pedestrian and bicyclist safety education programs. The safety relevance of the program is the extent t...
-
Nuclear power and probabilistic safety assessment (PSA): past through future applications
NASA Astrophysics Data System (ADS)
Stamatelatos, M. G.; Moieni, P.; Everline, C. J.
1995-03-01
Nuclear power reactor safety in the United States is about to enter a new era -- an era of risk- based management and risk-based regulation. First, there was the age of `prescribed safety assessment,' during which a series of design-basis accidents in eight categories of severity, or classes, were postulated and analyzed. Toward the end of that era, it was recognized that `Class 9,' or `beyond design basis,' accidents would need special attention because of the potentially severe health and financial consequences of these accidents. The accident at Three Mile Island showed that sequences of low-consequence, high-frequency events and human errors can be much more risk dominant than the Class 9 accidents. A different form of safety assessment, PSA, emerged and began to gain ground against the deterministic safety establishment. Eventually, this led to the current regulatory requirements for individual plant examinations (IPEs). The IPEs can serve as a basis for risk-based regulation and management, a concept that may ultimately transform the U.S. regulatory process from its traditional deterministic foundations to a process predicated upon PSA. Beyond the possibility of a regulatory environment predicated upon PSA lies the possibility of using PSA as the foundation for managing daily nuclear power plant operations.
-
Safety Assessment of Nitrocellulose and Collodion as Used in Cosmetics.
Fiume, Monice M; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-07-01
The Cosmetic Ingredient Review Expert Panel (the Panel) assessed the safety of nitrocellulose and collodion as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration in cosmetic formulations. Both ingredients are used almost exclusively in nail product formulations. The maximum concentration of use of nitrocellulose in nail polish and enamels is 22%; for collodion, the maximum reported concentration of use in nail polish and enamel is 14%. The Panel reviewed available animal and clinical data in making its determination of safety. © The Author(s) 2016.
-
Characteristics and safety assessment of intractable proteins in genetically modified crops.
Bushey, Dean F; Bannon, Gary A; Delaney, Bryan F; Graser, Gerson; Hefford, Mary; Jiang, Xiaoxu; Lee, Thomas C; Madduri, Krishna M; Pariza, Michael; Privalle, Laura S; Ranjan, Rakesh; Saab-Rincon, Gloria; Schafer, Barry W; Thelen, Jay J; Zhang, John X Q; Harper, Marc S
2014-07-01
Genetically modified (GM) crops may contain newly expressed proteins that are described as "intractable". Safety assessment of these proteins may require some adaptations to the current assessment procedures. Intractable proteins are defined here as those proteins with properties that make it extremely difficult or impossible with current methods to express in heterologous systems; isolate, purify, or concentrate; quantify (due to low levels); demonstrate biological activity; or prove equivalency with plant proteins. Five classes of intractable proteins are discussed here: (1) membrane proteins, (2) signaling proteins, (3) transcription factors, (4) N-glycosylated proteins, and (5) resistance proteins (R-proteins, plant pathogen recognition proteins that activate innate immune responses). While the basic tiered weight-of-evidence approach for assessing the safety of GM crops proposed by the International Life Sciences Institute (ILSI) in 2008 is applicable to intractable proteins, new or modified methods may be required. For example, the first two steps in Tier I (hazard identification) analysis, gathering of applicable history of safe use (HOSU) information and bioinformatics analysis, do not require protein isolation. The extremely low level of expression of most intractable proteins should be taken into account while assessing safety of the intractable protein in GM crops. If Tier II (hazard characterization) analyses requiring animal feeding are judged to be necessary, alternatives to feeding high doses of pure protein may be needed. These alternatives are discussed here. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.
-
Assessment of cognitive safety in clinical drug development
Roiser, Jonathan P.; Nathan, Pradeep J.; Mander, Adrian P.; Adusei, Gabriel; Zavitz, Kenton H.; Blackwell, Andrew D.
2016-01-01
Cognitive impairment is increasingly recognised as an important potential adverse effect of medication. However, many drug development programmes do not incorporate sensitive cognitive measurements. Here, we review the rationale for cognitive safety assessment, and explain several basic methodological principles for measuring cognition during clinical drug development, including study design and statistical analysis, from Phase I through to postmarketing. The crucial issue of how cognition should be assessed is emphasized, especially the sensitivity of measurement. We also consider how best to interpret the magnitude of any identified effects, including comparison with benchmarks. We conclude by discussing strategies for the effective communication of cognitive risks. PMID:26610416
-
Safety assessment of personal care products/cosmetics and their ingredients.
Nohynek, Gerhard J; Antignac, Eric; Re, Thomas; Toutain, Herve
2010-03-01
We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed, the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO(2) and ZnO in sunscreens. However
-
Safety assessment of personal care products/cosmetics and their ingredients
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nohynek, Gerhard J., E-mail: gnohynec@rd.loreal.co; Antignac, Eric; Re, Thomas
2010-03-01
We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed,more » the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO{sub 2} and ZnO in
-
Compressed natural gas bus safety: a quantitative risk assessment.
Chamberlain, Samuel; Modarres, Mohammad
2005-04-01
This study assesses the fire safety risks associated with compressed natural gas (CNG) vehicle systems, comprising primarily a typical school bus and supporting fuel infrastructure. The study determines the sensitivity of the results to variations in component failure rates and consequences of fire events. The components and subsystems that contribute most to fire safety risk are determined. Finally, the results are compared to fire risks of the present generation of diesel-fueled school buses. Direct computation of the safety risks associated with diesel-powered vehicles is possible because these are mature technologies for which historical performance data are available. Because of limited experience, fatal accident data for CNG bus fleets are minimal. Therefore, this study uses the probabilistic risk assessment (PRA) approach to model and predict fire safety risk of CNG buses. Generic failure data, engineering judgments, and assumptions are used in this study. This study predicts the mean fire fatality risk for typical CNG buses as approximately 0.23 fatalities per 100-million miles for all people involved, including bus passengers. The study estimates mean values of 0.16 fatalities per 100-million miles for bus passengers only. Based on historical data, diesel school bus mean fire fatality risk is 0.091 and 0.0007 per 100-million miles for all people and bus passengers, respectively. One can therefore conclude that CNG buses are more prone to fire fatality risk by 2.5 times that of diesel buses, with the bus passengers being more at risk by over two orders of magnitude. The study estimates a mean fire risk frequency of 2.2 x 10(-5) fatalities/bus per year. The 5% and 95% uncertainty bounds are 9.1 x 10(-6) and 4.0 x 10(-5), respectively. The risk result was found to be affected most by failure rates of pressure relief valves, CNG cylinders, and fuel piping.
-
Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees
ERIC Educational Resources Information Center
Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt
2012-01-01
Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…
-
Healthcare Databases for Drug Safety Research: Data Validity Assessment Remains Crucial.
Rawson, Nigel S B; D'Arcy, Carl
2018-04-30
Administrative healthcare utilization databases are frequently used either individually or as a component of aggregated data for evaluating drug safety issues without taking into account their known deficiencies. All too often insufficient evidence is provided about their validity for the purposes for which they are used. The assessment of data validity is a key constituent that should be included in drug safety research studies and should take a broad multifaceted approach that encompasses both diagnostic and drug exposure data. Drug safety researchers need to continue advancing their knowledge of the data resources they use and to ensure that they and the users of their research understand the limitations of the data that are the foundation on which their research is built. Fundamental issues regarding data validity should be addressed in each use of administrative data for drug safety research.
-
Seismic performance assessment of base-isolated safety-related nuclear structures
Huang, Y.-N.; Whittaker, A.S.; Luco, N.
2010-01-01
Seismic or base isolation is a proven technology for reducing the effects of earthquake shaking on buildings, bridges and infrastructure. The benefit of base isolation has been presented in terms of reduced accelerations and drifts on superstructure components but never quantified in terms of either a percentage reduction in seismic loss (or percentage increase in safety) or the probability of an unacceptable performance. Herein, we quantify the benefits of base isolation in terms of increased safety (or smaller loss) by comparing the safety of a sample conventional and base-isolated nuclear power plant (NPP) located in the Eastern U.S. Scenario- and time-based assessments are performed using a new methodology. Three base isolation systems are considered, namely, (1) Friction Pendulum??? bearings, (2) lead-rubber bearings and (3) low-damping rubber bearings together with linear viscous dampers. Unacceptable performance is defined by the failure of key secondary systems because these systems represent much of the investment in a new build power plant and ensure the safe operation of the plant. For the scenario-based assessments, the probability of unacceptable performance is computed for an earthquake with a magnitude of 5.3 at a distance 7.5 km from the plant. For the time-based assessments, the annual frequency of unacceptable performance is computed considering all potential earthquakes that may occur. For both assessments, the implementation of base isolation reduces the probability of unacceptable performance by approximately four orders of magnitude for the same NPP superstructure and secondary systems. The increase in NPP construction cost associated with the installation of seismic isolators can be offset by substantially reducing the required seismic strength of secondary components and systems and potentially eliminating the need to seismically qualify many secondary components and systems. ?? 2010 John Wiley & Sons, Ltd.
-
NASA Technical Reports Server (NTRS)
Zelkin, Natalie; Henriksen, Stephen
2011-01-01
This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents a preliminary safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the L-band communication system after the technology is chosen and system rollout timing is determined. The security risk analysis resulted in identifying main security threats to the proposed system as well as noting additional threats recommended for a future security analysis conducted at a later stage in the system development process. The document discusses various security controls, including those suggested in the COCR Version 2.0.
-
Konishi, Yoichi; Hayashi, Shim-Mo; Fukushima, Shoji
2014-08-01
The advancement of technology and the growth of international commerce underscore the need for global harmonization of regulatory safety requirements and their assessment pertaining to consumer products such as drugs, medical devices, and food. This need is particularly relevant when safety requirements involve time-intensive and costly animal safety studies. Here we present the current regulatory requirements in Europe, the United States, and Japan for flavoring substances (FSs) used in foods and point out significant differences relevant to the international standardization for safety assessments that in our opinion need to be addressed and overcome. The safety assessments that are carried out for FSs in various countries are influenced by divergent definitions of FS, by the information required and available for regulatory submission, and by different regulatory procedures, including the use of decision tree approaches. The European Food Safety Authority (EFSA), the Expert Panel of the U.S. Flavor and Extract Manufacturers Association (FEMA), and the Joint Food and Agriculture Organization (FAO)/World Health Organization (WHO) Expert Committee on Food Additives (JECFA) are making efforts to improve and harmonize the safety assessment of FSs. The application of in silico methods such as quantitative structure-activity relationships and read-across strategies relying on expert input are useful as a first-step screening of the assessment. Application of the Threshold of Toxicological Concern (TTC) approach permits conclusions that are compatible with the risk assessment approaches currently used by international advisory committees. The Japanese Regulatory Authority, on the other hand, does not yet consider in silico methods but still requires in vivo and in vitro genotoxicity test data as well as repeat-dose 90-day toxicity data in at least one species, to be submitted as the first step in the safety assessment of FSs. With this article, we echo requests that have
-
75 FR 15485 - Pipeline Safety: Workshop on Guidelines for Integrity Assessment of Cased Pipe
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-29
... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID...: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of workshop. SUMMARY... ``Guidelines for Integrity Assessment of Cased Pipe in Gas Transmission Pipelines'' and related Frequently...
-
PROBABILISTIC SAFETY ASSESSMENT OF OPERATIONAL ACCIDENTS AT THE WASTE ISOLATION PILOT PLANT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rucker, D.F.
2000-09-01
This report presents a probabilistic safety assessment of radioactive doses as consequences from accident scenarios to complement the deterministic assessment presented in the Waste Isolation Pilot Plant (WIPP) Safety Analysis Report (SAR). The International Council of Radiation Protection (ICRP) recommends both assessments be conducted to ensure that ''an adequate level of safety has been achieved and that no major contributors to risk are overlooked'' (ICRP 1993). To that end, the probabilistic assessment for the WIPP accident scenarios addresses the wide range of assumptions, e.g. the range of values representing the radioactive source of an accident, that could possibly have beenmore » overlooked by the SAR. Routine releases of radionuclides from the WIPP repository to the environment during the waste emplacement operations are expected to be essentially zero. In contrast, potential accidental releases from postulated accident scenarios during waste handling and emplacement could be substantial, which necessitates the need for radiological air monitoring and confinement barriers (DOE 1999). The WIPP Safety Analysis Report (SAR) calculated doses from accidental releases to the on-site (at 100 m from the source) and off-site (at the Exclusive Use Boundary and Site Boundary) public by a deterministic approach. This approach, as demonstrated in the SAR, uses single-point values of key parameters to assess the 50-year, whole-body committed effective dose equivalent (CEDE). The basic assumptions used in the SAR to formulate the CEDE are retained for this report's probabilistic assessment. However, for the probabilistic assessment, single-point parameter values were replaced with probability density functions (PDF) and were sampled over an expected range. Monte Carlo simulations were run, in which 10,000 iterations were performed by randomly selecting one value for each parameter and calculating the dose. Statistical information was then derived from the 10
-
Assessing community child passenger safety efforts in three Northwest Tribes.
Smith, M L; Berger, L R
2002-12-01
To identify strengths and weaknesses in community based child passenger safety programs by developing a scoring instrument and conducting observations of child restraint use in three Native American communities. The three communities are autonomous Tribal reservations in the Pacific Northwest. Their per capita incomes and rates of unemployment are comparable. In each community, 100 children under 5 years old were observed for car seat use. A six item community assessment tool (100 points maximum) awarded points for such items as the type (primary or secondary) and enforcement of child restraint laws; availability of car seats from distribution programs; extent of educational programs; and access to data on vehicle injuries. For children from birth to 4 years, the car seat use rate ranged from 12%-21%. Rates for infants (71%-80%) far exceeded rates for 1-4 year old children (5%-14%). Community scores ranged from 0 to 31.5 points. There was no correlation between scores and observed car seat use. One reason was the total lack of enforcement of restraint laws. A community assessment tool can highlight weaknesses in child passenger efforts. Linking such a tool with an objective measure of impact can be applied to other injury problems, such as fire safety or domestic violence. The very process of creating and implementing a community assessment can enhance agency collaboration and publicize evidence based "best practices" for injury prevention. Further study is needed to address methodologic issues and to examine crash and medical data in relation to community child passenger safety scores.
-
Safety Assessment of Probiotics
NASA Astrophysics Data System (ADS)
Lahtinen, Sampo J.; Boyle, Robert J.; Margolles, Abelardo; Frias, Rafael; Gueimonde, Miguel
Viable microbes have been a natural part of human diet throughout the history of mankind. Today, different fermented foods and other foods containing live microbes are consumed around the world, including industrialized countries, where the diet has become increasingly sterile during the last decades. By definition, probiotics are viable microbes with documented beneficial effects on host health. Probiotics have an excellent safety record, both in humans and in animals. Despite the wide and continuously increasing consumption of probiotics, adverse events related to probiotic use are extremely rare. Many popular probiotic strains such as lactobacilli and bifidobacteria can be considered as components of normal healthy intestinal microbiota, and thus are not thought to pose a risk for the host health - in contrast, beneficial effects on health are commonly reported. Nevertheless, the safety of probiotics is an important issue, in particular in the case of new potential probiotics which do not have a long history of safe use, and of probiotics belonging to species for which general assumption of safety cannot be made. Furthermore, safety of probiotics in high-risk populations such as critically ill patients and immunocompromized subjects deserves particular attention, as virtually all reported cases of bacteremia and fungemia associated with probiotic use, involve subjects with underlying diseases, compromised immune system or compromised intestinal integrity.
-
Validity of instruments to assess students' travel and pedestrian safety
USDA-ARS?s Scientific Manuscript database
Safe Routes to School (SRTS) programs are designed to make walking and bicycling to school,safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research...
-
2009-08-28
and Waterways Safety Assessment Workshop Report Maui, Hawaii 27 - 28 August 2009 Kahului Harbor Report Documentation Page Form ApprovedOMB...00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Ports and Waterways Safety Assessment: Maui, Hawaii 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...Harbor, Maui, Hawaii 27 - 28 August 2009 Table of Contents Page Introduction
-
Assessment of radiation safety awareness among nuclear medicine nurses: a pilot study
NASA Astrophysics Data System (ADS)
Yunus, N. A.; Abdullah, M. H. R. O.; Said, M. A.; Ch'ng, P. E.
2014-11-01
All nuclear medicine nurses need to have some knowledge and awareness on radiation safety. At present, there is no study to address this issue in Malaysia. The aims of this study were (1) to determine the level of knowledge and awareness on radiation safety among nuclear medicine nurses at Putrajaya Hospital in Malaysia and (2) to assess the effectiveness of a training program provided by the hospital to increase the knowledge and awareness of the nuclear medicine nurses. A total of 27 respondents attending a training program on radiation safety were asked to complete a questionnaire. The questionnaire consists 16 items and were categorized into two main areas, namely general radiation knowledge and radiation safety. Survey data were collected before and after the training and were analyzed using descriptive statistics and paired sample t-test. Respondents were scored out of a total of 16 marks with 8 marks for each area. The findings showed that the range of total scores obtained by the nuclear medicine nurses before and after the training were 6-14 (with a mean score of 11.19) and 13-16 marks (with a mean score of 14.85), respectively. Findings also revealed that the mean score for the area of general radiation knowledge (7.59) was higher than that of the radiation safety (7.26). Currently, the knowledge and awareness on radiation safety among the nuclear medicine nurses are at the moderate level. It is recommended that a national study be conducted to assess and increase the level of knowledge and awareness among all nuclear medicine nurses in Malaysia.
-
Use and misuse of motor-vehicle crash death rates in assessing highway-safety performance.
O'Neill, Brian; Kyrychenko, Sergey Y
2006-12-01
The objectives of the article are to assess the extent to which comparisons of motor-vehicle crash death rates can be used to determine the effectiveness of highway-safety policies over time in a country or to compare policy effectiveness across countries. Motor-vehicle crash death rates per mile traveled in the 50 U.S. states from 1980 to 2003 are used to show the influence on these rates of factors independent of highway-safety interventions. Multiple regression models relating state death rates to various measures related to urbanization and demographics are used. The analyses demonstrate strong relationships between state death rates and urbanization and demographics. Almost 60% of the variability among the state death rates can be explained by the independent variables in the multiple regression models. When the death rates for passenger vehicle occupants (i.e., excluding motorcycle, pedestrian, and other deaths) are used in the regression models, almost 70% of the variability in the rates can be explained by urbanization and demographics. The analyses presented in the article demonstrate that motor-vehicle crash death rates are strongly influenced by factors unrelated to highway-safety countermeasures. Overall death rates should not be used as a basis for judging the effectiveness (or ineffectiveness) of specific highway-safety countermeasures or to assess overall highway-safety policies, especially across jurisdictions. There can be no substitute for the use of carefully designed scientific evaluations of highway-safety interventions that use outcome measures directly related to the intervention; e.g., motorcyclist deaths should be used to assess the effectiveness of motorcycle helmet laws. While this may seem obvious, there are numerous examples in the literature of death rates from all crashes being used to assess the effectiveness of interventions aimed at specific subsets of crashes.
-
Schools and Disasters: Safety and Mental Health Assessment and Interventions for Children.
Lai, Betty S; Esnard, Ann-Margaret; Lowe, Sarah R; Peek, Lori
2016-12-01
This article draws on experiences and lessons from global disasters and utilizes the United Nations Comprehensive School Safety Framework to highlight the necessary role of safe schools in protecting children, as well as adult staff, from the immediate threats and long-term implications of disasters. Specifically, we focus on three well-established pillars of school safety: Pillar I: Safe Learning Facilities; Pillar II: Disaster Management; and Pillar III: Risk Reduction and Resilience Education. In addition, we propose a potential fourth pillar, which underscores the function of schools in postdisaster mental health assessment and intervention for children. We argue that schools offer a central location and trusted institutional space for mental health assessment and intervention after disasters. We also examine the important linkages between schools, child mental health, and household and family recovery. We conclude with recommendations for filling gaps in research and practice related to ensuring the safety of schools and the associated health and well-being of children in the face of future disasters.
-
Pushing and pulling: an assessment tool for occupational health and safety practitioners.
Lind, Carl Mikael
2018-03-01
A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator's health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.
-
Patient safety and patient assessment in pre-hospital care: a study protocol.
Hagiwara, Magnus Andersson; Nilsson, Lena; Strömsöe, Anneli; Axelsson, Christer; Kängström, Anna; Herlitz, Johan
2016-02-12
Patient safety issues in pre-hospital care are poorly investigated. The aim of the planned study is to survey patient safety problems in pre-hospital care in Sweden. The study is a retro-perspective structured medical record review based on the use of 11 screening criteria. Two instruments for structured medical record review are used: a trigger tool instrument designed for pre-hospital care and a newly development instrument designed to compare the pre-hospital assessment with the final hospital assessment. Three different ambulance organisations are participating in the study. Every month, one rater in each organisation randomly collects 30 medical records for review. With guidance from the review instrument, he/she independently reviews the record. Every month, the review team meet for a discussion of problematic reviews. The results will be analysed with descriptive statistics and logistic regression. The findings will make an important contribution to knowledge about patient safety issues in pre-hospital care.
-
Safety Assessment of Methyl Glucose Polyethers and Esters as Used in Cosmetics.
Johnson, Wilbur; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2016-11-01
The Cosmetic Ingredient Review Expert Panel (Panel) reviewed the safety of methyl glucose polyethers and esters which function in cosmetics as skin/hair-conditioning agents, surfactants, or viscosity increasing agents. The esters included in this assessment are mono-, di-, or tricarboxyester substituted methyl glucosides, and the polyethers are mixtures of various chain lengths. The Panel reviewed available animal and clinical data, including the molecular weights, log K ow s, and other properties in making its determination of safety on these ingredients. Where there were data gaps, similarities between molecular structures, physicochemical and biological characteristics, and functions and concentrations in cosmetics allowed for extrapolation of the available toxicological data to assess the safety of the entire group. The Panel concluded that there likely would be no significant systemic exposure from cosmetic use of these ingredients, and that these ingredients are safe in cosmetic formulations in the present practices of use and concentration. © The Author(s) 2016.
-
Carmichael, Paul; Davies, Michael; Dent, Matt; Fentem, Julia; Fletcher, Samantha; Gilmour, Nicola; MacKay, Cameron; Maxwell, Gavin; Merolla, Leona; Pease, Camilla; Reynolds, Fiona; Westmoreland, Carl
2009-12-01
Non-animal based approaches to risk assessment are now routinely used for assuring consumer safety for some endpoints (such as skin irritation) following considerable investment in developing and applying new methods over the past 20 years. Unilever's research programme into non-animal approaches for safety assessment is currently focused on the application of new technologies to risk assessments in the areas of skin allergy, cancer and general toxicity (including inhalation toxicity). In all of these areas, a long-term investment is essential to increase the scientific understanding of the underlying biological and chemical processes that we believe will ultimately form a sound basis for novel risk assessment approaches. Our research programme in these priority areas consists of in-house research as well as Unilever-sponsored academic research, involvement with EU-funded projects (e.g. Sens-it-iv, carcinoGENOMICS), participation in cross-industry collaborative research (e.g. COLIPA, EPAA) and ongoing involvement with other scientific initiatives on non-animal approaches to risk assessment (e.g. UK NC3Rs, US 'Human Toxicology Project' consortium). 2009 FRAME.
-
Anderson, Steven W.; Aksan, Nazan; Dawson, Jeffrey D.; Uc, Ergun Y.; Johnson, Amy M.; Rizzo, Matthew
2013-01-01
Decline in cognitive abilities can be an important contributor to the driving problems encountered by older adults, and neuropsychological assessment may provide a practical approach to evaluating this aspect of driving safety risk. The purpose of the present study was to evaluate several commonly used neuropsychological tests in the assessment of driving safety risk in older adults with and without neurological disease. A further goal of this study was to identify brief combinations of neuropsychological tests that sample performances in key functional domains and thus could be used to efficiently assess driving safety risk. 345 legally licensed and active drivers over the age of 50, with either no neurologic disease (N=185), probable Alzheimer's disease (N=40), Parkinson's disease (N=91), or stroke (N=29), completed vision testing, a battery of 10 neuropsychological tests, and an 18 mile drive on urban and rural roads in an instrumented vehicle. Performances on all neuropsychological tests were significantly correlated with driving safety errors. Confirmatory factor analysis was used to identify 3 key cognitive domains assessed by the tests (speed of processing, visuospatial abilities, and memory), and several brief batteries consisting of one test from each domain showed moderate corrected correlations with driving performance. These findings are consistent with the notion that driving places demands on multiple cognitive abilities that can be affected by aging and age-related neurological disease, and that neuropsychological assessment may provide a practical off-road window into the functional status of these cognitive systems. PMID:22943767
-
Anderson, Steven W; Aksan, Nazan; Dawson, Jeffrey D; Uc, Ergun Y; Johnson, Amy M; Rizzo, Matthew
2012-01-01
Decline in cognitive abilities can be an important contributor to the driving problems encountered by older adults, and neuropsychological assessment may provide a practical approach to evaluating this aspect of driving safety risk. The purpose of the present study was to evaluate several commonly used neuropsychological tests in the assessment of driving safety risk in older adults with and without neurological disease. A further goal of this study was to identify brief combinations of neuropsychological tests that sample performances in key functional domains and thus could be used to efficiently assess driving safety risk. A total of 345 legally licensed and active drivers over the age of 50, with no neurologic disease (N = 185), probable Alzheimer's disease (N = 40), Parkinson's disease (N = 91), or stroke (N = 29), completed vision testing, a battery of 10 neuropsychological tests, and an 18-mile drive on urban and rural roads in an instrumented vehicle. Performances on all neuropsychological tests were significantly correlated with driving safety errors. Confirmatory factor analysis was used to identify 3 key cognitive domains assessed by the tests (speed of processing, visuospatial abilities, and memory), and several brief batteries consisting of one test from each domain showed moderate corrected correlations with driving performance. These findings are consistent with the notion that driving places demands on multiple cognitive abilities that can be affected by aging and age-related neurological disease, and that neuropsychological assessment may provide a practical off-road window into the functional status of these cognitive systems.
-
Assessment of the Impact of Scheduled Postmarketing Safety Summary Analyses on Regulatory Actions
Sekine, S; Pinnow, EE; Wu, E; Kurtzig, R; Hall, M; Dal Pan, GJ
2016-01-01
In addition to standard postmarketing drug safety monitoring, Section 915 of the Food and Drug Administration Amendments Act of 2007 (FDAAA) requires the US Food and Drug Administration (FDA) to conduct a summary analysis of adverse event reports to identify risks of a drug or biologic product 18 months after product approval, or after 10,000 patients have used the product, whichever is later. We assessed the extent to which these analyses identified new safety signals and resultant safety-related label changes. Among 458 newly approved products, 300 were the subjects of a scheduled analysis; a new safety signal that resulted in a safety-related label change was found for 11 of these products. Less than 2% of 713 safety-related label changes were based on the scheduled analyses. Our study suggests that the safety summary analyses provide only marginal value over other pharmacovigilance activities. PMID:26853718
-
Li, Jih-Heng; Yu, Wen-Jing; Lai, Yuan-Hui; Ko, Ying-Chin
2012-07-01
The major food safety episodes that occurred in Taiwan during the past decade are briefly reviewed in this paper. Among the nine major episodes surveyed, with the exception of a U.S. beef (associated with Creutzfeldt-Jakob disease)-related incident, all the others were associated with chemical toxicants. The general public, which has a layperson attitude of zero tolerance toward food safety, may panic over these food-safety-associated incidents. However, the health effects and impacts of most incidents, with the exception of the melamine incident, were essentially not fully evaluated. The mass media play an important role in determining whether a food safety concern becomes a major incident. A well-coordinated and harmonized system for domestic and international collaboration to set up standards and regulations is critical, as observed in the incidents of pork with ractopamine, Chinese hairy crab with nitrofuran antibiotics, and U.S. wheat with malathion. In the future, it can be anticipated that food safety issues will draw more attention from the general public. For unknown new toxicants or illicit adulteration of food, the establishment of a more proactive safety assessment system to monitor potential threats and provide real-time information exchange is imperative. Copyright © 2012. Published by Elsevier B.V.
-
Quantitative assessment of building fire risk to life safety.
Guanquan, Chu; Jinhua, Sun
2008-06-01
This article presents a quantitative risk assessment framework for evaluating fire risk to life safety. Fire risk is divided into two parts: probability and corresponding consequence of every fire scenario. The time-dependent event tree technique is used to analyze probable fire scenarios based on the effect of fire protection systems on fire spread and smoke movement. To obtain the variation of occurrence probability with time, Markov chain is combined with a time-dependent event tree for stochastic analysis on the occurrence probability of fire scenarios. To obtain consequences of every fire scenario, some uncertainties are considered in the risk analysis process. When calculating the onset time to untenable conditions, a range of fires are designed based on different fire growth rates, after which uncertainty of onset time to untenable conditions can be characterized by probability distribution. When calculating occupant evacuation time, occupant premovement time is considered as a probability distribution. Consequences of a fire scenario can be evaluated according to probability distribution of evacuation time and onset time of untenable conditions. Then, fire risk to life safety can be evaluated based on occurrence probability and consequences of every fire scenario. To express the risk assessment method in detail, a commercial building is presented as a case study. A discussion compares the assessment result of the case study with fire statistics.
-
Nanotechnology in food science: Functionality, applicability, and safety assessment.
He, Xiaojia; Hwang, Huey-Min
2016-10-01
Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted. Copyright © 2016. Published by Elsevier B.V.
-
Implementation of Alternative Test Strategies for the Safety Assessment of Engineered Nanomaterials
Nel, Andre
2014-01-01
Nanotechnology introduces a new field that requires novel approaches and methods for hazard and risk assessment. For an appropriate scientific platform for safety assessment, nanoscale properties and functions of engineered nanomaterials (ENMs), including how the physicochemical properties of the materials related to mechanisms of injury at the nano-bio interface, must be considered. Moreover, this rapidly advancing new field requires novel test strategies that allow multiple toxicants to be screened in robust, mechanism-based assays in which the bulk of the investigation can be carried out at the cellular and biomolecular level whilst maintaining limited animal use and is based on the contribution of toxicological pathways to the pathophysiology of disease. First, a predictive toxicological approach for the safety assessment of ENMs will be discussed against the background of a ‘21st-century vision’ for using alternative test strategies (ATSs) to perform toxicological assessment of large numbers of untested chemicals, thereby reducing a backlog that could otherwise become a problem for nanotechnology. An ATS is defined here as an alternative/reduction alternative to traditional animal testing. Secondly, the approach of selecting pathways of toxicity to screen for the pulmonary hazard potential of carbon nanotubes and metal oxides will be discussed, as well as how to use these pathways to perform high-content or high-throughput testing and how the data can be used for hazard ranking, risk assessment, regulatory decision-making and ‘safer-by-design’ strategies. Finally, the utility and disadvantages of this predictive toxicological approach to ENM safety assessment, and how it can assist the 21st- century vision, will be addressed PMID:23879741
-
Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin
2017-12-01
Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.
-
NASA Post-Columbia Safety & Mission Assurance, Review and Assessment Initiatives
NASA Astrophysics Data System (ADS)
Newman, J. Steven; Wander, Stephen M.; Vecellio, Don; Miller, Andrew J.
2005-12-01
On February 1, 2003, NASA again experienced a tragic accident as the Space Shuttle Columbia broke apart upon reentry, resulting in the loss of seven astronauts. Several of the findings and observations of the Columbia Accident Investigation Board addressed the need to strengthen the safety and mission assurance function at NASA. This paper highlights key steps undertaken by the NASA Office of Safety and Mission Assurance (OSMA) to establish a stronger and more- robust safety and mission assurance function for NASA programs, projects, facilities and operations. This paper provides an overview of the interlocking OSMA Review and Assessment Division (RAD) institutional and programmatic processes designed to 1) educate, inform, and prepare for audits, 2) verify requirements flow-down, 3) verify process capability, 4) verify compliance with requirements, 5) support risk management decision making, 6) facilitate secure web- based collaboration, and 7) foster continual improvement and the use of lessons learned.
-
Sun, F; Chen, J; Tong, Q; Zeng, S
2007-01-01
Management of drinking water safety is changing towards an integrated risk assessment and risk management approach that includes all processes in a water supply system from catchment to consumers. However, given the large number of water supply systems in China and the cost of implementing such a risk assessment procedure, there is a necessity to first conduct a strategic screening analysis at a national level. An integrated methodology of risk assessment and screening analysis is thus proposed to evaluate drinking water safety of a conventional water supply system. The violation probability, indicating drinking water safety, is estimated at different locations of a water supply system in terms of permanganate index, ammonia nitrogen, turbidity, residual chlorine and trihalomethanes. Critical parameters with respect to drinking water safety are then identified, based on which an index system is developed to prioritize conventional water supply systems in implementing a detailed risk assessment procedure. The evaluation results are represented as graphic check matrices for the concerned hazards in drinking water, from which the vulnerability of a conventional water supply system is characterized.
-
Promoting the safety performance of industrial radiography using a quantitative assessment system.
Kardan, M R; Mianji, F A; Rastkhah, N; Babakhani, A; Azad, S Borhan
2006-12-01
The increasing number of industrial radiographers and their considerable occupational exposure has been one of the main concerns of the Iran Nuclear Regulatory Authority (INRA) in recent years. In 2002, a quantitative system of evaluating the safety performance of licensees and a complementary enforcement system was introduced by the National Radiation Protection Department (NRPD). Each parameter of the practice is given a weighting factor according to its importance to safety. Assessment of the licensees is done quantitatively by summing up their scores using prepared tables. Implementing this system of evaluation showed a considerable decrease in deficiencies in the various centres. Tables are updated regularly as a result of findings during the inspections. This system is used in addition to enforcement to promote safety performance and to increase the culture of safety in industrial radiography.
-
Safety assessment of Cracked K-joint Structure Based on Fracture Mechanics
NASA Astrophysics Data System (ADS)
Wang, Xin; Pengyu, Yan; Jianwei, Du; Fuhai, Cai
2017-05-01
The K-joint is the main bearing structure of lattice jib crane. During frequent operation of the crane, surface cracks often occur at its weld toe, and then continue to expand until failure. The safety of the weak structure K-joint of the crane jib can be evaluated by BS7910 failure assessment standard in order to improve its utilization. The finite element model of K-joint structure with cracks is established, and its mechanical properties is analyzed by ABAQUS software, the results show that the crack depth has a great influence on the bearing capacity of the structure compared with the crack length. It is assumed that the K-joint with the semi-elliptical surface crack under the action of the tension propagate stably under the condition that the c/a (ratio of short axis to long axis of ellipse) is about 0.3. The safety assessment of K-joint with different lengths crack is presented according to the 2A failure assessment diagram of BS7910, and the critical crack of K-joint under different loads can be obtained.
-
ERIC Educational Resources Information Center
Soderstrom, Irina R.; Elrod, Preston
2006-01-01
In an effort to assess students' perceptions of victimization in their schools, as well as their schools' safety, over 1,900 students from elementary, middle, high, and alternative schools were administered a 154-item questionnaire. The responses on the items were used to establish the psychometric properties of 19 theoretically driven scales and…
-
Goebel, Carsten; Aeby, Pierre; Ade, Nadège; Alépée, Nathalie; Aptula, Aynur; Araki, Daisuke; Dufour, Eric; Gilmour, Nicola; Hibatallah, Jalila; Keller, Detlef; Kern, Petra; Kirst, Annette; Marrec-Fairley, Monique; Maxwell, Gavin; Rowland, Joanna; Safford, Bob; Schellauf, Florian; Schepky, Andreas; Seaman, Chris; Teichert, Thomas; Tessier, Nicolas; Teissier, Silvia; Weltzien, Hans Ulrich; Winkler, Petra; Scheel, Julia
2012-06-01
Characterisation of skin sensitisation potential is a key endpoint for the safety assessment of cosmetic ingredients especially when significant dermal exposure to an ingredient is expected. At present the mouse local lymph node assay (LLNA) remains the 'gold standard' test method for this purpose however non-animal test methods are under development that aim to replace the need for new animal test data. COLIPA (the European Cosmetics Association) funds an extensive programme of skin sensitisation research, method development and method evaluation and helped coordinate the early evaluation of the three test methods currently undergoing pre-validation. In May 2010, a COLIPA scientific meeting was held to analyse to what extent skin sensitisation safety assessments for cosmetic ingredients can be made in the absence of animal data. In order to propose guiding principles for the application and further development of non-animal safety assessment strategies it was evaluated how and when non-animal test methods, predictions based on physico-chemical properties (including in silico tools), threshold concepts and weight-of-evidence based hazard characterisation could be used to enable safety decisions. Generation and assessment of potency information from alternative tools which at present is predominantly derived from the LLNA is considered the future key research area. Copyright © 2012 Elsevier Inc. All rights reserved.
-
A National Estimate of Performance: Statewide Highway Safety Program Assessment.
ERIC Educational Resources Information Center
National Highway Traffic Safety Administration (DOT), Washington, DC.
A nationwide systematic approach to assess the developments and achievements of highway safety activities was conducted to measure program outputs from 1969 through 1974 using key indicators of performance such as ratios and percentages. A sample of 10 states was selected with overall sample of 105 local jurisdictions which would provide estimated…
-
INPRO Assessment of an INS in the Area of Safety of Fuel Cycle Installations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Raj, B.; Busurin, Y.; Depisch, F.
2006-07-01
INPRO has defined requirements organized in a hierarchy of Basic Principles, User Requirements and Criteria (consisting of an indicator and an acceptance limit) to be met by innovative nuclear reactor systems (INS) in six areas, namely: economics, safety, waste management, environment, proliferation resistance, and infrastructure. If an INS meets all requirements in all areas it represents a sustainable system for the supply of energy, capable of making a significant contribution to meeting the energy needs of the 21. century. Draft manuals have been developed, for each INPRO area, to provide guidance for performing an assessment of whether an INS meetsmore » the INPRO requirements in a given area. The manuals set out the information that needs to be assembled to perform an assessment and provide guidance on selecting the acceptance limits and, for a given INS, for determining the value of the indicators for comparison with the associated acceptance limits. Each manual also includes an example of a specific assessment to illustrate the guidance. This paper discusses the manual for performing an INPRO assessment in the area of safety of fuel cycle installations. The example, chosen solely for the purpose of illustrating the INPRO methodology, describes an assessment of an MOX fuel fabrication plant based on sol-gel technology and illustrates an assessment performed for an INS at an early stage of development. The safety issues and the assessment steps are presented in detail in the paper. (authors)« less
-
Scenario Analysis for the Safety Assessment of Nuclear Waste Repositories: A Critical Review.
Tosoni, Edoardo; Salo, Ahti; Zio, Enrico
2018-04-01
A major challenge in scenario analysis for the safety assessment of nuclear waste repositories pertains to the comprehensiveness of the set of scenarios selected for assessing the safety of the repository. Motivated by this challenge, we discuss the aspects of scenario analysis relevant to comprehensiveness. Specifically, we note that (1) it is necessary to make it clear why scenarios usually focus on a restricted set of features, events, and processes; (2) there is not yet consensus on the interpretation of comprehensiveness for guiding the generation of scenarios; and (3) there is a need for sound approaches to the treatment of epistemic uncertainties. © 2017 Society for Risk Analysis.
-
Safety assessment on pedestrian crossing environments using MLS data.
Soilán, Mario; Riveiro, Belén; Sánchez-Rodríguez, Ana; Arias, Pedro
2018-02-01
In the framework of infrastructure analysis and maintenance in an urban environment, it is important to address the safety of every road user. This paper presents a methodology for the evaluation of several safety indicators on pedestrian crossing environments using geometric and radiometric information extracted from 3D point clouds collected by a Mobile Mapping System (MMS). The methodology is divided in four main modules which analyze the accessibility of the crossing area, the presence of traffic lights and traffic signs, and the visibility between a driver and a pedestrian on the proximities of a pedestrian crossing. The outputs of the analysis are exported to a Geographic Information System (GIS) where they are visualized and can be further processed in the context of city management. The methodology has been tested on approximately 30 pedestrian crossings in cluttered urban environments of two different cities. Results show that MMS are a valid mean to assess the safety of a specific urban environment, regarding its geometric conditions. Remarkable results are presented on traffic light classification, with a global F-score close to 95%. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
Amended Safety Assessment of Isethionate Salts as Used in Cosmetics.
Burnett, Christina L; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) rereviewed the safety of 12 isethionate salts as used in cosmetics and concluded that these ingredients are safe in the present practices of use and concentration, when formulated to be nonirritating. These isethionate salts are reported to function mostly as surfactants and cleansing agents in cosmetic products. The Panel reviewed the available animal and clinical data as well as information from previous CIR reports. Although there are data gaps, the shared chemical core structure, expected similarities in physicochemical properties, and similar functions and concentrations in cosmetics enabled grouping these ingredients and reading across the available toxicological data to support the safety assessment of each ingredient.
-
Development of Safety Assessment Code for Decommissioning of Nuclear Facilities
NASA Astrophysics Data System (ADS)
Shimada, Taro; Ohshima, Soichiro; Sukegawa, Takenori
A safety assessment code, DecDose, for decommissioning of nuclear facilities has been developed, based on the experiences of the decommissioning project of Japan Power Demonstration Reactor (JPDR) at Japan Atomic Energy Research Institute (currently JAEA). DecDose evaluates the annual exposure dose of the public and workers according to the progress of decommissioning, and also evaluates the public dose at accidental situations including fire and explosion. As for the public, both the internal and the external doses are calculated by considering inhalation, ingestion, direct radiation from radioactive aerosols and radioactive depositions, and skyshine radiation from waste containers. For external dose for workers, the dose rate from contaminated components and structures to be dismantled is calculated. Internal dose for workers is calculated by considering dismantling conditions, e.g. cutting speed, cutting length of the components and exhaust velocity. Estimation models for dose rate and staying time were verified by comparison with the actual external dose of workers which were acquired during JPDR decommissioning project. DecDose code is expected to contribute the safety assessment for decommissioning of nuclear facilities.
-
Assessing Patient Activation among High-Need, High-Cost Patients in Urban Safety Net Care Settings.
Napoles, Tessa M; Burke, Nancy J; Shim, Janet K; Davis, Elizabeth; Moskowitz, David; Yen, Irene H
2017-12-01
We sought to examine the literature using the Patient Activation Measure (PAM) or the Patient Enablement Instrument (PEI) with high-need, high-cost (HNHC) patients receiving care in urban safety net settings. Urban safety net care management programs serve low-income, racially/ethnically diverse patients living with multiple chronic conditions. Although many care management programs track patient progress with the PAM or the PEI, it is not clear whether the PAM or the PEI is an effective and appropriate tool for HNHC patients receiving care in urban safety net settings in the United States. We searched PubMed, EMBASE, Web of Science, and PsycINFO for articles published between 2004 and 2015 that used the PAM and between 1998 and 2015 that used the PEI. The search was limited to English-language articles conducted in the United States and published in peer-reviewed journals. To assess the utility of the PAM and the PEI in urban safety net care settings, we defined a HNHC patient sample as racially/ethnically diverse, low socioeconomic status (SES), and multimorbid. One hundred fourteen articles used the PAM. All articles using the PEI were conducted outside the U.S. and therefore were excluded. Nine PAM studies (8%) included participants similar to those receiving care in urban safety net settings, three of which were longitudinal. Two of the three longitudinal studies reported positive changes following interventions. Our results indicate that research on patient activation is not commonly conducted on racially and ethnically diverse, low SES, and multimorbid patients; therefore, there are few opportunities to assess the appropriateness of the PAM in such populations. Investigators expressed concerns with the potential unreliability and inappropriate nature of the PAM on multimorbid, older, and low-literacy patients. Thus, the PAM may not be able to accurately assess patient progress among HNHC patients receiving care in urban safety net settings. Assessing
-
Environmental, health and safety assessment of photovoltaics
NASA Technical Reports Server (NTRS)
Rose, E. C.
1983-01-01
The environmental, health, and safety (E, H and S) concerns associated with the fabrication, deployment, and decommissioning of photovoltaic (PV) systems in terrestial applications are identified and assessed. Discussion is limited to crystalline silicon technologies. The primary E, H, and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.
-
ERIC Educational Resources Information Center
Sekiwu, Denis; Kabanda, Milly; Naluwemba, Esther Frances; Kaggwa, Victoria Tamale
2015-01-01
Health hazards are part and parcel of human life necessitating the provision of safety in every organizational environment (WHO regional Office for Africa, 2004). Likewise, the area of safety and accident prevention is of great concern to school improvement. The study sought to investigate the relationship between Risk Assessment and Compliancy to…
-
Code of Federal Regulations, 2012 CFR
2012-10-01
... Third-Party Assessment of PTC System Safety Verification and Validation F Appendix F to Part 236... Safety Verification and Validation (a) This appendix provides minimum requirements for mandatory independent third-party assessment of PTC system safety verification and validation pursuant to subpart H or I...
-
Code of Federal Regulations, 2014 CFR
2014-10-01
... Third-Party Assessment of PTC System Safety Verification and Validation F Appendix F to Part 236... Safety Verification and Validation (a) This appendix provides minimum requirements for mandatory independent third-party assessment of PTC system safety verification and validation pursuant to subpart H or I...
-
Code of Federal Regulations, 2011 CFR
2011-10-01
... Third-Party Assessment of PTC System Safety Verification and Validation F Appendix F to Part 236... Safety Verification and Validation (a) This appendix provides minimum requirements for mandatory independent third-party assessment of PTC system safety verification and validation pursuant to subpart H or I...
-
Code of Federal Regulations, 2013 CFR
2013-10-01
... Third-Party Assessment of PTC System Safety Verification and Validation F Appendix F to Part 236... Safety Verification and Validation (a) This appendix provides minimum requirements for mandatory independent third-party assessment of PTC system safety verification and validation pursuant to subpart H or I...
-
Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J
2015-04-22
We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.
-
Patient Safety Culture Assessment in Oman
Al-Mandhari, Ahmed; Al-Zakwani, Ibrahim; Al-Kindi, Moosa; Tawilah, Jihane; Dorvlo, Atsu S.S.; Al-Adawi, Samir
2014-01-01
Objective To illustrate the patient safety culture in Oman as gleaned via 12 indices of patient safety culture derived from the Hospital Survey on Patient Safety Culture (HSPSC) and to compare the average positive response rates in patient safety culture between Oman and the USA, Taiwan, and Lebanon. Methods This was a cross-sectional research study employed to gauge the performance of HSPSC safety indices among health workers representing five secondary and tertiary care hospitals in the northern region of Oman. The participants (n=398) represented different professional designations of hospital staff. Analyses were performed using univariate statistics. Results The overall average positive response rate for the 12 patient safety culture dimensions of the HSPSC survey in Oman was 58%. The indices from HSPSC that were endorsed the highest included ‘organizational learning and continuous improvement’ while conversely, ‘non-punitive response to errors’ was ranked the least. There were no significant differences in average positive response rates between Oman and the United States (58% vs. 61%; p=0.666), Taiwan (58% vs. 64%; p=0.386), and Lebanon (58% vs. 61%; p=0.666). Conclusion This study provides the first empirical study on patient safety culture in Oman which is similar to those rates reported elsewhere. It highlights the specific strengths and weaknesses which may stem from the specific milieu prevailing in Oman. PMID:25170407
-
Patient safety culture assessment in oman.
Al-Mandhari, Ahmed; Al-Zakwani, Ibrahim; Al-Kindi, Moosa; Tawilah, Jihane; Dorvlo, Atsu S S; Al-Adawi, Samir
2014-07-01
To illustrate the patient safety culture in Oman as gleaned via 12 indices of patient safety culture derived from the Hospital Survey on Patient Safety Culture (HSPSC) and to compare the average positive response rates in patient safety culture between Oman and the USA, Taiwan, and Lebanon. This was a cross-sectional research study employed to gauge the performance of HSPSC safety indices among health workers representing five secondary and tertiary care hospitals in the northern region of Oman. The participants (n=398) represented different professional designations of hospital staff. Analyses were performed using univariate statistics. The overall average positive response rate for the 12 patient safety culture dimensions of the HSPSC survey in Oman was 58%. The indices from HSPSC that were endorsed the highest included 'organizational learning and continuous improvement' while conversely, 'non-punitive response to errors' was ranked the least. There were no significant differences in average positive response rates between Oman and the United States (58% vs. 61%; p=0.666), Taiwan (58% vs. 64%; p=0.386), and Lebanon (58% vs. 61%; p=0.666). This study provides the first empirical study on patient safety culture in Oman which is similar to those rates reported elsewhere. It highlights the specific strengths and weaknesses which may stem from the specific milieu prevailing in Oman.
-
Safety assessment for the postictal confusional phase following complex partial seizure.
Tucker, C
1985-06-01
Misunderstanding of the postictal confusional state that follows the complex partial seizure has caused emotional and physical harm to patients. Concern about this phenomenon and its effects upon the patient prompted this study to explore, describe, and document one method of intervention to lessen these harmful effects. An evaluative descriptive research design was employed to assess patient safety during and after the postictal confusional phase following a complex partial seizure. A closed-structured questionnaire and participant observation were the methods used to collect data for this study. A Level of Safety Tool was specifically designed for this study.
-
Progress of IRSN R&D on ITER Safety Assessment
NASA Astrophysics Data System (ADS)
Van Dorsselaere, J. P.; Perrault, D.; Barrachin, M.; Bentaib, A.; Gensdarmes, F.; Haeck, W.; Pouvreau, S.; Salat, E.; Seropian, C.; Vendel, J.
2012-08-01
The French "Institut de Radioprotection et de Sûreté Nucléaire" (IRSN), in support to the French "Autorité de Sûreté Nucléaire", is analysing the safety of ITER fusion installation on the basis of the ITER operator's safety file. IRSN set up a multi-year R&D program in 2007 to support this safety assessment process. Priority has been given to four technical issues and the main outcomes of the work done in 2010 and 2011 are summarized in this paper: for simulation of accident scenarios in the vacuum vessel, adaptation of the ASTEC system code; for risk of explosion of gas-dust mixtures in the vacuum vessel, adaptation of the TONUS-CFD code for gas distribution, development of DUST code for dust transport, and preparation of IRSN experiments on gas inerting, dust mobilization, and hydrogen-dust mixtures explosion; for evaluation of the efficiency of the detritiation systems, thermo-chemical calculations of tritium speciation during transport in the gas phase and preparation of future experiments to evaluate the most influent factors on detritiation; for material neutron activation, adaptation of the VESTA Monte Carlo depletion code. The first results of these tasks have been used in 2011 for the analysis of the ITER safety file. In the near future, this R&D global programme may be reoriented to account for the feedback of the latter analysis or for new knowledge.
-
NASA Technical Reports Server (NTRS)
Cotton, William B.; Hilb, Robert; Koczo, Stefan, Jr.; Wing, David J.
2016-01-01
A set of five developmental steps building from the NASA TASAR (Traffic Aware Strategic Aircrew Requests) concept are described, each providing incrementally more efficiency and capacity benefits to airspace system users and service providers, culminating in a Full Airborne Trajectory Management capability. For each of these steps, the incremental Operational Hazards and Safety Requirements are identified for later use in future formal safety assessments intended to lead to certification and operational approval of the equipment and the associated procedures. Two established safety assessment methodologies that are compliant with the FAA's Safety Management System were used leading to Failure Effects Classifications (FEC) for each of the steps. The most likely FEC for the first three steps, Basic TASAR, Digital TASAR, and 4D TASAR, is "No effect". For step four, Strategic Airborne Trajectory Management, the likely FEC is "Minor". For Full Airborne Trajectory Management (Step 5), the most likely FEC is "Major".
-
Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil
2014-09-01
Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined for the desired framework, and then, by reviewing literature, factors affecting these main elements were determined. The relative importance of each element and its related factors was calculated at organizational and project levels. The provided framework was then implemented in three construction companies, and results were compared together. THE RESULTS OF THE STUDY SHOW THAT THE RELATIVE IMPORTANCE OF THE MAIN ELEMENTS AND THEIR RELATED FACTORS DIFFER BETWEEN ORGANIZATIONAL AND PROJECT LEVELS: leadership and commitment are the most important elements at the organization level, whereas risk assessment and management are most important at the project level. The present study demonstrated that the framework is easy to administer, and by interpreting the results, the main factors leading to the present condition of companies can be determined.
-
Evaluation of experimental methods for assessing safety for ultrasound radiation force elastography.
Skurczynski, M J; Duck, F A; Shipley, J A; Bamber, J C; Melodelima, D
2009-08-01
Standard test tools have been evaluated for the assessment of safety associated with a prototype transducer intended for a novel radiation force elastographic imaging system. In particular, safety has been evaluated by direct measurement of temperature rise, using a standard thermal test object, and detection of inertial cavitation from acoustic emission. These direct measurements have been compared with values of the thermal index and mechanical index, calculated from acoustic measurements in water using standard formulae. It is concluded that measurements using a thermal test object can be an effective alternative to the calculation of thermal index for evaluating thermal hazard. Measurement of the threshold for cavitation was subject to considerable variability, and it is concluded that the mechanical index still remains the preferred standard means for assessing cavitation hazard.
-
Developing a model for hospital inherent safety assessment: Conceptualization and validation.
Yari, Saeed; Akbari, Hesam; Gholami Fesharaki, Mohammad; Khosravizadeh, Omid; Ghasemi, Mohammad; Barsam, Yalda; Akbari, Hamed
2018-01-01
Paying attention to the safety of hospitals, as the most crucial institute for providing medical and health services wherein a bundle of facilities, equipment, and human resource exist, is of significant importance. The present research aims at developing a model for assessing hospitals' safety based on principles of inherent safety design. Face validity (30 experts), content validity (20 experts), construct validity (268 examples), convergent validity, and divergent validity have been employed to validate the prepared questionnaire; and the items analysis, the Cronbach's alpha test, ICC test (to measure reliability of the test), composite reliability coefficient have been used to measure primary reliability. The relationship between variables and factors has been confirmed at 0.05 significance level by conducting confirmatory factor analysis (CFA) and structural equations modeling (SEM) technique with the use of Smart-PLS. R-square and load factors values, which were higher than 0.67 and 0.300 respectively, indicated the strong fit. Moderation (0.970), simplification (0.959), substitution (0.943), and minimization (0.5008) have had the most weights in determining the inherent safety of hospital respectively. Moderation, simplification, and substitution, among the other dimensions, have more weight on the inherent safety, while minimization has the less weight, which could be due do its definition as to minimize the risk.
-
New approach to assessment of medication safety in a community hospital.
Patty, Christopher M; Miller, Sylvia
2015-01-01
Use of medications for hospitalized patients is nearly universal, and medication-related injuries are common. Accurate assessment of harm is foundational to development of effective hospital medication safety plans. Using methods nearly identical to those in large national studies, the author examined incidence and typology of medication-related injury. This practice innovation provided a community hospital with its first systematic assessment of medication-related injury. The information gained provided a clearer picture of injury and promoted collaboration.
-
Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh
2017-01-01
Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.
-
Recent Developments in Hyperspectral Imaging for Assessment of Food Quality and Safety
Huang, Hui; Liu, Li; Ngadi, Michael O.
2014-01-01
Hyperspectral imaging which combines imaging and spectroscopic technology is rapidly gaining ground as a non-destructive, real-time detection tool for food quality and safety assessment. Hyperspectral imaging could be used to simultaneously obtain large amounts of spatial and spectral information on the objects being studied. This paper provides a comprehensive review on the recent development of hyperspectral imaging applications in food and food products. The potential and future work of hyperspectral imaging for food quality and safety control is also discussed. PMID:24759119
-
Randomized clinical trials and observational studies in the assessment of drug safety.
Sawchik, J; Hamdani, J; Vanhaeverbeek, M
2018-05-01
Randomized clinical trials are considered as the preferred design to assess the potential causal relationships between drugs or other medical interventions and intended effects. For this reason, randomized clinical trials are generally the basis of development programs in the life cycle of drugs and the cornerstone of evidence-based medicine. Instead, randomized clinical trials are not the design of choice for the detection and assessment of rare, delayed and/or unexpected effects related to drug safety. Moreover, the highly homogeneous populations resulting from restrictive eligibility criteria make randomized clinical trials inappropriate to describe comprehensively the safety profile of drugs. In that context, observational studies have a key added value when evaluating the benefit-risk balance of the drugs. However, observational studies are more prone to bias than randomized clinical trials and they have to be designed, conducted and reported judiciously. In this article, we discuss the strengths and limitations of randomized clinical trials and of observational studies, more particularly regarding their contribution to the knowledge of medicines' safety profile. In addition, we present general recommendations for the sensible use of observational data. Copyright © 2018 Elsevier Masson SAS. All rights reserved.
-
Launch Services Safety Overview
NASA Technical Reports Server (NTRS)
Loftin, Charles E.
2008-01-01
NASA/KSC Launch Services Division Safety (SA-D) services include: (1) Assessing the safety of the launch vehicle (2) Assessing the safety of NASA ELV spacecraft (S/C) / launch vehicle (LV) interfaces (3) Assessing the safety of spacecraft processing to ensure resource protection of: - KSC facilities - KSC VAFB facilities - KSC controlled property - Other NASA assets (4) NASA personnel safety (5) Interfacing with payload organizations to review spacecraft for adequate safety implementation and compliance for integrated activities (6) Assisting in the integration of safety activities between the payload, launch vehicle, and processing facilities
-
Assessment of reliability and safety of a manufacturing system with sequential failures is an important issue in industry, since the reliability and safety of the system depend not only on all failed states of system components, but also on the sequence of occurrences of those...
-
An Employee Questionnaire for Assessing Patient Safety in Outpatient Surgery
2005-01-01
461 An Employee Questionnaire for Assessing Patient Safety in Outpatient Surgery Pascale Carayon, Carla J. Alvarado, Ann Schoofs Hundt, Scott...Springman, Amanda Borgsdorf, Peter L.T. Hoonakker Abstract This paper provides information on the reliability and validity of an employee ...intervention on both employees and patients. In this paper, we describe the SEIPS employee questionnaire, which surveys various elements of the work system
-
Assessing the Food Safety Knowledge of University of Maine Students
ERIC Educational Resources Information Center
Ferk, Chelsea C.; Calder, Beth L.; Camire, Mary Ellen
2016-01-01
Foodborne illness is a global public health issue. Young adults may work in foodservice while they are university students, and their habits may later shape the practices and well-being of their children. The objective of this study was to establish baseline data and assess the food safety knowledge of 18- to 26-year-old Univ. of Maine students.…
-
An assessment of food hygiene and safety at farmers' markets.
Worsfold, D; Worsfold, P M; Griffith, C J
2004-04-01
Farmers' markets are becoming a more significant part of the food-retailing sector. A survey of farmers' markets was conducted to assess aspects of food hygiene and safety. The views of the public using the markets were also examined. The range of farm products was wide and the methods utilised varied. The markets were usually temporary outdoor events with few facilities. Traders had received elementary food hygiene training and rated their hygiene standards highly. Less than half had risk management procedures in place, most did not perceive their produce as high-risk. They believed consumers to be mainly interested in food quality and to regard food safety issues highly. Consumers shopped at the markets because of the quality of the products sold. Their overall satisfaction with the markets was high and they raised no concerns about food safety. Given the restricted facilities at farmers' markets and the early phase of implementation of hygiene management systems by market traders, it may be precautionary to restrict the sale of farm products at farmers markets to those that are regarded as low-risk.
-
The role of PRA in the safety assessment of VVER Nuclear Power Plants in Ukraine.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kot, C.
1999-05-10
Ukraine operates thirteen (13) Soviet-designed pressurized water reactors, VVERS. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs), in accordance with new SAR content requirements issued in September 1995, by the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine. The requirements are in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. The last two requirements, on PRA and BDBA, are new, and the DBA requirements are an expanded version of the older SAR requirements. The US Departmentmore » of Energy (USDOE), as part of its Soviet-Designed Reactor Safety activities, is providing assistance and technology transfer to Ukraine to support their nuclear power plants (NPPs) in developing a Western-type technical basis for the new SARs. USDOE sponsored In-Depth Safety Assessments (ISAs) are in progress at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1, and a follow-on study has been initiated at Khmenytskyy Unit 1. The ISA projects encompass most areas of plant safety evaluation, but the initial emphasis is on performing a detailed, plant-specific Level 1 Internal Events PRA. This allows the early definition of the plant risk profile, the identification of risk significant accident sequences and plant vulnerabilities and provides guidance for the remainder of the safety assessments.« less
-
Boyer, Ivan J; Bergfeld, Wilma F; Heldreth, Bart; Fiume, Monice M; Gill, Lillian J
The Cosmetic Ingredient Review (CIR) is a nonprofit program to assess the safety of ingredients in personal care products in an open, unbiased, and expert manner. Cosmetic Ingredient Review was established in 1976 by the Personal Care Products Council (PCPC), with the support of the US Food and Drug Administration (USFDA) and the Consumer Federation of America (CFA). Cosmetic Ingredient Review remains the only scientific program in the world committed to the systematic, independent review of cosmetic ingredient safety in a public forum. Cosmetic Ingredient Review operates in accordance with procedures modeled after the USFDA process for reviewing over-the-counter drugs. Nine voting panel members are distinguished, such as medical professionals, scientists, and professors. Three nonvoting liaisons are designated by the USFDA, CFA, and PCPC to represent government, consumer, and industry, respectively. The annual rate of completing safety assessments accelerated from about 100 to more than 400 ingredients by implementing grouping and read-across strategies and other approaches. As of March 2017, CIR had reviewed 4,740 individual cosmetic ingredients, including 4,611 determined to be safe as used or safe with qualifications, 12 determined to be unsafe, and 117 ingredients for which the information is insufficient to determine safety. Examples of especially challenging safety assessments and issues are presented here, including botanicals. Cosmetic Ingredient Review continues to strengthen its program with the ongoing cooperation of the USFDA, CFA, the cosmetics industry, and everyone else interested in contributing to the process.
-
NASA Astrophysics Data System (ADS)
Falakh, Fajrul; Setiani, Onny
2018-02-01
Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jordan, Scott A., E-mail: scott.jordan@hc-sc.gc.c; Cunningham, David G.; Marles, Robin J.
Although herbal medicinal products (HMP) have been perceived by the public as relatively low risk, there has been more recognition of the potential risks associated with this type of product as the use of HMPs increases. Potential harm can occur via inherent toxicity of herbs, as well as from contamination, adulteration, plant misidentification, and interactions with other herbal products or pharmaceutical drugs. Regulatory safety assessment for HMPs relies on both the assessment of cases of adverse reactions and the review of published toxicity information. However, the conduct of such an integrated investigation has many challenges in terms of the quantitymore » and quality of information. Adverse reactions are under-reported, product quality may be less than ideal, herbs have a complex composition and there is lack of information on the toxicity of medicinal herbs or their constituents. Nevertheless, opportunities exist to capitalise on newer information to increase the current body of scientific evidence. Novel sources of information are reviewed, such as the use of poison control data to augment adverse reaction information from national pharmacovigilance databases, and the use of more recent toxicological assessment techniques such as predictive toxicology and omics. The integration of all available information can reduce the uncertainty in decision making with respect to herbal medicinal products. The example of Aristolochia and aristolochic acids is used to highlight the challenges related to safety assessment, and the opportunities that exist to more accurately elucidate the toxicity of herbal medicines.« less
-
DOT National Transportation Integrated Search
2000-02-01
This report presents the results of the technology and safety assessment of the Bethel/Kuskokwim River hovercraft service,operated by the Alaska Hovercraft Joint Venture (AHJV). The primary purpose of the service was a two-year demonstration of bypas...
-
Assessment of occupational health and safety hazard exposures among working college students.
Balanay, Jo Anne G; Adesina, Adepeju; Kearney, Gregory D; Richards, Stephanie L
2014-01-01
Adolescents and young adults have higher injury rates than their adult counterparts in similar jobs. This study used the working college student population to assess health and safety hazards in the workplace, characterize related occupational diseases and injuries, and describe worker health/safety activities provided by employers. College students (≥17 years old) were assessed via online surveys about work history, workplace exposure to hazards, occupational diseases/injuries, and workplace health/safety activities. Approximately half (51%) of participants (n = 1,147) were currently employed at the time of the survey or had been employed while enrolled in college. Restaurants (other than fast food) were the most frequently reported work setting. The most reported workplace hazards included noise exposure and contact with hot liquids/surfaces. Twenty percent of working students experienced injury at work; some injuries were severe enough to limit students' normal activities for >3 days (30%) or require medical attention (44%). Men had significantly higher prevalence of injuries (P = 0.05) and near-misses (P < 0.01) at work than women. Injury occurrence was associated with near-misses (AOR = 5.08, P < 0.01) and co-worker injuries (AOR = 3.19, P < 0.01) after gender and age adjustments. Most (77%) received worker safety training and half were given personal protective equipment (PPE) by their employers. Risk reduction from workplace injuries and illnesses among working college students may be achieved by implementing occupational health and safety (OHS) strategies including incorporation of OHS in the college curriculum, promotion of OHS by university/college student health services, and improving awareness of OHS online resources among college students, employers, and educators. © 2013 Wiley Periodicals, Inc.
-
Use of System Safety Risk Assessments for the Space Shuttle Reusable Solid Rocket Motor (RSRM)
NASA Technical Reports Server (NTRS)
Greenhalgh, Phillip O.; McCool, Alex (Technical Monitor)
2001-01-01
This paper discusses the System Safety approach used to assess risk for the Space Shuttle Reusable Solid Rocket Motor (RSRM). Previous to the first RSRM flight in the fall of 1988, all systems were analyzed extensively to assure that hazards were identified, assessed and that the baseline risk was understood and appropriately communicated. Since the original RSRM baseline was established, Thiokol and NASA have implemented a number of initiatives that have further improved the RSRM. The robust design, completion of rigorous testing and flight success of the RSRM has resulted in a wise reluctance to make changes. One of the primary assessments required to accompany the documentation of each proposed change and aid in the decision making process is a risk assessment. Documentation supporting proposed changes, including the risk assessments from System Safety, are reviewed and assessed by Thiokol and NASA technical management. After thorough consideration, approved changes are implemented adding improvements to and reducing risk of the Space Shuttle RSRM.
-
Safety assessment of biotechnology-derived pharmaceuticals: ICH and beyond.
Serabian, M A; Pilaro, A M
1999-01-01
Many scientific discussions, especially in the past 8 yr, have focused on definition of criteria for the optimal assessment of the preclinical toxicity of pharmaceuticals. With the current overlap of responsibility among centers within the Food and Drug Administration (FDA), uniformity of testing standards, when appropriate, would be desirable. These discussions have extended beyond the boundaries of the FDA and have culminated in the acceptance of formalized, internationally recognized guidances. The work of the International Committee on Harmonisation (ICH) and the initiatives developed by the FDA are important because they (a) represent a consensus scientific opinion, (b) promote consistency, (c) improve the quality of the studies performed, (d) assist the public sector in determining what may be generally acceptable to prepare product development plans, and (e) provide guidance for the sponsors in the design of preclinical toxicity studies. Disadvantages associated with such initiatives include (a) the establishment of a historical database that is difficult to relinquish, (b) the promotion of a check-the-box approach, i.e., a tendancy to perform only the minimum evaluation required by the guidelines, (c) the creation of a disincentive for industry to develop and validate new models, and (d) the creation of state-of-the-art guidances that may not allow for appropriate evaluation of novel therapies. The introduction of biotechnology-derived pharmaceuticals for clinical use has often required the application of unique approaches to assessing their safety in preclinical studies. There is much diversity among these products, which include the gene and cellular therapies, monoclonal antibodies, human-derived recombinant regulatory proteins, blood products, and vaccines. For many of the biological therapies, there will be unique product issues that may require specific modifications to protocol design and may raise additional safety concerns (e.g., immunogenicity
-
Veyrand, Julien; Marin-Kuan, Maricel; Bezencon, Claudine; Frank, Nancy; Guérin, Violaine; Koster, Sander; Latado, Hélia; Mollergues, Julie; Patin, Amaury; Piguet, Dominique; Serrant, Patrick; Varela, Jesus; Schilter, Benoît
2017-10-01
Food contact materials (FCM) contain chemicals which can migrate into food and result in human exposure. Although it is mandatory to ensure that migration does not endanger human health, there is still no consensus on how to pragmatically assess the safety of FCM since traditional approaches would require extensive toxicological and analytical testing which are expensive and time consuming. Recently, the combination of bioassays, analytical chemistry and risk assessment has been promoted as a new paradigm to identify toxicologically relevant molecules and address safety issues. However, there has been debate on the actual value of bioassays in that framework. In the present work, a FCM anticipated to release the endocrine active chemical 4-nonyphenol (4NP) was used as a model. In a migration study, the leaching of 4NP was confirmed by LC-MS/MS and GC-MS. This was correlated with an increase in both estrogenic and anti-androgenic activities as measured with bioassays. A standard risk assessment indicated that according to the food intake scenario applied, the level of 4NP measured was lower, close or slightly above the acceptable daily intake. Altogether these results show that bioassays could reveal the presence of an endocrine active chemical in a real-case FCM migration study. The levels reported were relevant for safety assessment. In addition, this work also highlighted that bioactivity measured in migrate does not necessarily represent a safety issue. In conclusion, together with analytics, bioassays contribute to identify toxicologically relevant molecules leaching from FCM and enable improved safety assessment.
-
Development of Risk Assessment Matrix for NASA Engineering and Safety Center
NASA Technical Reports Server (NTRS)
Malone, Roy W., Jr.; Moses, Kelly
2004-01-01
This paper describes a study, which had as its principal goal the development of a sufficiently detailed 5 x 5 Risk Matrix Scorecard. The purpose of this scorecard is to outline the criteria by which technical issues can be qualitatively and initially prioritized. The tool using this score card has been proposed to be one of the information resources the NASA Engineering and Safety Center (NESC) takes into consideration when making decisions with respect to incoming information on safety concerns across the entire NASA agency. The contents of this paper discuss in detail each element of the risk matrix scorecard, definitions for those elements and the rationale behind the development of those definitions. This scorecard development was performed in parallel with the tailoring of the existing Futron Corporation Integrated Risk Management Application (IRMA) software tool. IRMA was tailored to fit NESC needs for evaluating incoming safety concerns and was renamed NESC Assessment Risk Management Application (NAFMA) which is still in developmental phase.
-
Approaches to the safety assessment of engineered nanomaterials (ENM) in food.
Cockburn, Andrew; Bradford, Roberta; Buck, Neil; Constable, Anne; Edwards, Gareth; Haber, Bernd; Hepburn, Paul; Howlett, John; Kampers, Frans; Klein, Christoph; Radomski, Marek; Stamm, Hermann; Wijnhoven, Susan; Wildemann, Tanja
2012-06-01
A systematic, tiered approach to assess the safety of engineered nanomaterials (ENMs) in foods is presented. The ENM is first compared to its non-nano form counterpart to determine if ENM-specific assessment is required. Of highest concern from a toxicological perspective are ENMs which have potential for systemic translocation, are insoluble or only partially soluble over time or are particulate and bio-persistent. Where ENM-specific assessment is triggered, Tier 1 screening considers the potential for translocation across biological barriers, cytotoxicity, generation of reactive oxygen species, inflammatory response, genotoxicity and general toxicity. In silico and in vitro studies, together with a sub-acute repeat-dose rodent study, could be considered for this phase. Tier 2 hazard characterisation is based on a sentinel 90-day rodent study with an extended range of endpoints, additional parameters being investigated case-by-case. Physicochemical characterisation should be performed in a range of food and biological matrices. A default assumption of 100% bioavailability of the ENM provides a 'worst case' exposure scenario, which could be refined as additional data become available. The safety testing strategy is considered applicable to variations in ENM size within the nanoscale and to new generations of ENM. Copyright © 2012 Elsevier Ltd. All rights reserved.
-
Software Safety Risk in Legacy Safety-Critical Computer Systems
NASA Technical Reports Server (NTRS)
Hill, Janice; Baggs, Rhoda
2007-01-01
Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.
-
Colleton, Curtis; Brewster, David; Chester, Anne; Clarke, David O; Heining, Peter; Olaharski, Andrew; Graziano, Michael
2016-04-01
The use of minipigs in preclinical safety testing of pharmaceuticals is considered an alternative to the more traditional dog and nonhuman primate (NHP) nonrodent species. Substantial evidence exists to suggest that the anatomy, physiology, and biochemistry of minipigs are similar enough to humans to consider them as valid nonrodent models for pharmaceutical safety testing. Since the utilization of minipigs was last assessed over 5 years ago, the Preclinical Safety Leadership Group (DruSafe) of the International Consortium for Innovation and Quality in Pharmaceutical Development conducted this survey to provide an updated assessment of the utility, perceived value, and impediments to the use of minipigs in preclinical safety testing. Of the 32 participating members of DruSafe, 15 responded to the survey representing both large and small companies. Respondents indicated that the minipig has been utilized mostly for short-term safety assessment studies with dermal, oral, and parenteral routes of administration. Minipigs are widely accepted as appropriate models for cardiovascular assessments and have been used to a limited extent for reproductive toxicology testing. Overall responses indicated that safety testing for large molecules using this species is relatively low due to a lack of background data, reagents or biomarkers, concerns regarding immune system characterization and poor suitability for developmental toxicity assessments. Most companies utilized contract research organizations for definitive safety toxicity assessment studies. Conclusions of this survey indicate that minipig is an acceptable nonrodent species largely limited to studies using small molecules, primarily dermal products, and results are comparable to those reported 5 years ago. © The Author(s) 2016.
-
Majamanda, J; Ndhlovu, P; Shawa, I T
2013-12-01
Tuberculosis (TB) is caused by Mycobacterium tuberculosis and is transmitted mainly through aerosolization of infected sputum which puts laboratory workers at risk in spite of the laboratory workers' risk of infection being at 3 to 9 times higher than the general public. Laboratory safety should therefore be prioritized and optimized to provide sufficient safety to laboratory workers. To assess the safety for the laboratory workers in TB primary microscopy centres in Blantyre urban. TB primary microscopy centers in Blantyre urban were assessed in aspects of equipment availability, facility layout, and work practice, using a standardized WHO/AFRO ISO 15189 checklist for the developing countries which sets the minimum safety score at ≥80%. Each center was graded according to the score it earned upon assessment. Only one (1) microscopy center out nine (9) reached the minimum safety requirement. Four (4) centers were awarded 1 star level, four (4) centers were awarded 2 star level and only one (1) center was awarded 3 star level. In Blantyre urban, 89% of the Tuberculosis microscopy centers are failing to provide the minimum safety to the laboratory workers. Government and other stake holders should be committed in addressing the safety challenges of TB microscopy centres in the country to ensure safety for the laboratory workers. It is recommended that the study be conducted at the regional or national level for both public and private laboratories in order to have a general picture of safety in Tb microscopy centres possibly across the country.
-
ERIC Educational Resources Information Center
Taylor, Matthew A.; Alvero, Alicia M.
2012-01-01
The intent of the present study was to assess the effects of discrimination training only and in combination with frequent safety observations on five participants' safety-related behavior in a simulated office setting. The study used a multiple-baseline design across safety-related behaviors. Across all participants and behavior, safety improved…
-
CONTEXTUALIZED ASSESSMENT WITH BATTERED WOMEN: STRATEGIC SAFETY PLANNING TO COPE WITH MULTIPLE HARMS
Lindhorst, Taryn; Nurius, Paula; Macy, Rebecca J.
2007-01-01
Given the prevalence of domestic violence and the likelihood that many victims will not receive services from specialized domestic violence providers, this article provides a framework for contextualized assessment that can be used by generalist practitioners. Drawing from stress and coping theory, the authors discuss the relevance of assessing appraisals and emotional responses within the context of environmental and individual risk and protective factors. Through an illustrative case assessment, the authors describe the contextualized assessment process and its ramifications for strategic safety planning. PMID:18167523
-
Probabilistic Causal Analysis for System Safety Risk Assessments in Commercial Air Transport
NASA Technical Reports Server (NTRS)
Luxhoj, James T.
2003-01-01
Aviation is one of the critical modes of our national transportation system. As such, it is essential that new technologies be continually developed to ensure that a safe mode of transportation becomes even safer in the future. The NASA Aviation Safety Program (AvSP) is managing the development of new technologies and interventions aimed at reducing the fatal aviation accident rate by a factor of 5 by year 2007 and by a factor of 10 by year 2022. A portfolio assessment is currently being conducted to determine the projected impact that the new technologies and/or interventions may have on reducing aviation safety system risk. This paper reports on advanced risk analytics that combine the use of a human error taxonomy, probabilistic Bayesian Belief Networks, and case-based scenarios to assess a relative risk intensity metric. A sample case is used for illustrative purposes.
-
Lee, Hui Key; Abdul Halim, Hishamuddin; Thong, Kwai Lin; Chai, Lay Ching
2017-01-01
Institutional foodborne illness outbreaks continue to hit the headlines in the country, indicating the failure of food handlers to adhere to safe practices during food preparation. Thus, this study aimed to compare the knowledge, attitude, and self-reported practices (KAP) of food safety assessment and microbiological assessment of food handlers’ hands as an indicator of hygiene practices in food premises. This study involved 85 food handlers working in a university located in Kuala Lumpur, Malaysia. The food safety KAP among food handlers (n = 67) was assessed using a questionnaire; while the hand swabs (n = 85) were tested for the total aerobic count, coliforms, and Escherichia coli, Staphylococcus aureus, Salmonella, Vibrio cholerae and Vibrio parahaemolyticus. The food handlers had moderate levels of food safety knowledge (61.7%) with good attitude (51.9/60) and self-reported practices (53.2/60). It is noteworthy that the good self-reported practices were not reflected in the microbiological assessment of food handlers’ hands, in which 65% of the food handlers examined had a total aerobic count ≥20 CFU/cm2 and Salmonella was detected on 48% of the food handlers’ hands. In conclusion, the suggestion of this study was that the food handlers had adequate food safety knowledge, but perceived knowledge failed to be translated into practices at work.
-
Assessment of Food Safety Knowledge of High School and Transition Teachers of Special Needs Students
ERIC Educational Resources Information Center
Pivarnik, Lori F.; Patnoad, Martha S.; Richard, Nicole Leydon; Gable, Robert K.; Hirsch, Diane Wright; Madaus, Joseph; Scarpati, Stan; Carbone, Elena
2009-01-01
Adolescents with disabilities require access to general education and life skills instruction. Knowledge of food safety for this audience is important for health and valuable for work placement. The objective was to implement a survey to assess high school and transition special education teachers in RI, CT, and MA for food safety knowledge and…
-
A 3S Risk ?3SR? Assessment Approach for Nuclear Power: Safety Security and Safeguards.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Forrest, Robert; Reinhardt, Jason Christian; Wheeler, Timothy A.
Safety-focused risk analysis and assessment approaches struggle to adequately include malicious, deliberate acts against the nuclear power industry's fissile and waste material, infrastructure, and facilities. Further, existing methods do not adequately address non- proliferation issues. Treating safety, security, and safeguards concerns independently is inefficient because, at best, it may not take explicit advantage of measures that provide benefits against multiple risk domains, and, at worst, it may lead to implementations that increase overall risk due to incompatibilities. What is needed is an integrated safety, security and safeguards risk (or "3SR") framework for describing and assessing nuclear power risks that canmore » enable direct trade-offs and interactions in order to inform risk management processes -- a potential paradigm shift in risk analysis and management. These proceedings of the Sandia ePRA Workshop (held August 22-23, 2017) are an attempt to begin the discussions and deliberations to extend and augment safety focused risk assessment approaches to include security concerns and begin moving towards a 3S Risk approach. Safeguards concerns were not included in this initial workshop and are left to future efforts. This workshop focused on four themes in order to begin building out a the safety and security portions of the 3S Risk toolkit: 1. Historical Approaches and Tools 2. Current Challenges 3. Modern Approaches 4. Paths Forward and Next Steps This report is organized along the four areas described above, and concludes with a summary of key points. 2 Contact: rforres@sandia.gov; +1 (925) 294-2728« less
-
Safety Assessment for the Kozloduy National Disposal Facility in Bulgaria - 13507
DOE Office of Scientific and Technical Information (OSTI.GOV)
Biurrun, E.; Haverkamp, B.; Lazaro, A.
2013-07-01
Due to the early decommissioning of four Water-Water Energy Reactors (WWER) 440-V230 reactors at the Nuclear Power Plant (NPP) near the city of Kozloduy in Bulgaria, large amounts of low and intermediate radioactive waste will arise much earlier than initially scheduled. In or-der to manage the radioactive waste from the early decommissioning, Bulgaria has intensified its efforts to provide a near surface disposal facility at Radiana with the required capacity. To this end, a project was launched and assigned in international competition to a German-Spanish consortium to provide the complete technical planning including the preparation of the Intermediate Safety Assessmentmore » Report. Preliminary results of operational and long-term safety show compliance with the Bulgarian regulatory requirements. The long-term calculations carried out for the Radiana site are also a good example of how analysis of safety assessment results can be used for iterative improvements of the assessment by pointing out uncertainties and areas of future investigations to reduce such uncertainties in regard to the potential radiological impact. The computer model used to estimate the long-term evolution of the future repository at Radiana predicted a maximum total annual dose for members of the critical group, which is carried to approximately 80 % by C-14 for a specific ingestion pathway. Based on this result and the outcome of the sensitivity analysis, existing uncertainties were evaluated and areas for reasonable future investigations to reduce these uncertainties were identified. (authors)« less
-
Safety and risk assessment of ceramide 3 in cosmetic products.
Choi, Seul Min; Lee, Byung-Mu
2015-10-01
Ceramide 3 is used mainly as a moisturizer in various cosmetic products. Although several safety studies on formulations containing pseudo-ceramide or ceramide have been conducted at the preclinical and clinical levels for regulatory approval, no studies have evaluated the systemic toxicity of ceramide 3. To address this issue, we conducted a risk assessment and comprehensive toxicological review of ceramide and pseudo-ceramide. We assumed that ceramide 3 is present in various personal and cosmetic products at concentrations of 0.5-10%. Based on previously reported exposure data, the margin of safety (MOS) was calculated for product type, use pattern, and ceramide 3 concentration. Lipsticks with up to 10% ceramide 3 (MOS = 4111) are considered safe, while shampoos containing 0.5% ceramide 3 (MOS = 148) are known to be safe. Reported MOS values for body lotion applied to the hands (1% ceramide 3) and back (5% ceramide 3) were 103 and 168, respectively. We anticipate that face cream would be safe up to a ceramide 3 concentration of 3% (MOS = 149). Collectively, the MOS approach indicated no safety concerns for cosmetic products containing less than 1% ceramide 3. Copyright © 2015 Elsevier Ltd. All rights reserved.
-
Schweizer, Anja; Dejager, Sylvie; Foley, James E; Kothny, Wolfgang
2011-01-01
Aim: Analyzing safety aspects of a drug from individual studies can lead to difficult-to-interpret results. The aim of this paper is therefore to assess the general safety and tolerability, including incidences of the most common adverse events (AEs), of vildagliptin based on a large pooled database of Phase II and III clinical trials. Methods: Safety data were pooled from 38 studies of ≥12 to ≥104 weeks’ duration. AE profiles of vildagliptin (50 mg bid; N = 6116) were evaluated relative to a pool of comparators (placebo and active comparators; N = 6210). Absolute incidence rates were calculated for all AEs, serious AEs (SAEs), discontinuations due to AEs, and deaths. Results: Overall AEs, SAEs, discontinuations due to AEs, and deaths were all reported with a similar frequency in patients receiving vildagliptin (69.1%, 8.9%, 5.7%, and 0.4%, respectively) and patients receiving comparators (69.0%, 9.0%, 6.4%, and 0.4%, respectively), whereas drug-related AEs were seen with a lower frequency in vildagliptin-treated patients (15.7% vs 21.7% with comparators). The incidences of the most commonly reported specific AEs were also similar between vildagliptin and comparators, except for increased incidences of hypoglycemia, tremor, and hyperhidrosis in the comparator group related to the use of sulfonylureas. Conclusions: The present pooled analysis shows that vildagliptin was overall well tolerated in clinical trials of up to >2 years in duration. The data further emphasize the value of a pooled analysis from a large safety database versus assessing safety and tolerability from individual studies. PMID:21415917
-
A safety culture assessment by mixed methods at a public maternity and infant hospital in China
Listyowardojo, Tita Alissa; Yan, Xiaoling; Leyshon, Stephen; Ray-Sannerud, Bobbie; Yu, Xin Yan; Zheng, Kai; Duan, Tao
2017-01-01
Objective To assess safety culture at a public maternity hospital in Shanghai, China, using a sequential mixed methods approach. The study was part of a bigger study looking at the application of the mixed methods approach to assess safety culture in health care in different organizations and countries. Methodology A mixed methods approach was utilized by first distributing the Safety Attitudes Questionnaire measuring six safety culture dimensions and five independent items to all hospital staff (n=1482) working in 18 departments at a single hospital. Afterward, semistructured interviews were conducted using convenience sampling, where 48 hospital staff from nine departments at the same hospital were individually interviewed. Results The survey received a response rate of 96%. The survey findings show significant differences between the hospital departments in almost all safety culture dimensions and independent items. Similarly, the interview findings revealed that there were different, competing priorities between departments perceived to result in a reduced quality of collaboration and bottlenecks in care delivery. Another major finding was that staff who worked more hours per week would perceive working conditions significantly more negatively. Issues related to working conditions were also the most common concerns discussed in the interviews, especially the issue on high workload. High workload was also reflected in the fact that 91.45% of survey respondents reported that they worked 40 hours or longer per week. Finally, interview findings complemented survey findings, thus providing a more complete and accurate picture of safety culture. Conclusion Hospital leaders need to prioritize interventions focused on improving the quality of cross-department collaboration and reducing workload. A mixed methods assessment of safety culture provides more meaningful, targeted results, enabling leaders to prioritize and tailor improvement efforts to increase the impact of
-
Staying silent about safety issues: Conceptualizing and measuring safety silence motives.
Manapragada, Archana; Bruk-Lee, Valentina
2016-06-01
Communication between employees and supervisors about safety-related issues is an important component of a safe workplace. When supervisors receive information from employees about safety issues, they may gain otherwise-missed opportunities to correct these issues and/or prevent negative safety outcomes. A series of three studies were conducted to identify various safety silence motives, which describe the reasons that employees do not speak up to supervisors about safety-related issues witnessed in the workplace, and to develop a tool to assess these motives. Results suggest that employees stay silent about safety issues based on perceptions of altering relationships with others (relationship-based), perceptions of the organizational climate (climate-based), the assessment of the safety issue (issue-based), or characteristics of the job (job-based). We developed a 17-item measure to assess these four motives, and initial evidence was found for the construct and incremental validity of the safety silence motives measure in a sample of nurses. Copyright © 2016 Elsevier Ltd. All rights reserved.
-
Eye Protection: Safety Glasses. Safety Spotlight
ERIC Educational Resources Information Center
Deck, Anita; Roy, Ken
2017-01-01
When it comes to eye safety, there are some situations in which regular safety glasses will work adequately for the needs of the STEM education classroom or laboratory. However, there are certain instances in which safety goggles must be used for safer protection. Taking the time to analyze hazards and assess the risks prior to any activity in the…
-
Safety assessment characteristics of pedestrian legform impactors in vehicle-front impact tests.
Matsui, Yasuhiro
2014-12-01
This study investigated the characteristics of safety assessment results of front-area vehicle impact tests carried out using the Transport Research Laboratory (TRL) legform impactor and a flexible legform impactor (FLEX legform impactor). Different types of vehicles (sedan, sport utility vehicle, high-roof K-car, and light cargo van) were examined. The impact locations in the study were the center of the bumper and an extremely stiff structure of the bumper (i.e., in front of the side member) of each tested vehicle. The measured injury criteria were normalized by injury assessment reference values of each legform impactor. The test results for center and side-member impacts indicated that there were no significant differences in ligament injury assessments derived from the normalized knee ligament injury measures between the TRL legform impactor and the FLEX legform impactor. Evaluations made using the TRL legform impactor and the FLEX legform impactor are thus similar in the vehicle safety investigation for knee ligament injury. Vehicle-center impact test results revealed that the tibia fracture assessments derived from the normalized tibia fracture measures did not significantly differ between the TRL legform impactor and the FLEX legform impactor. However, for an impact against an extremely stiff structure, there was a difference in the tibia fracture assessment between the FLEX legform impactor and the TRL legform impactor owing to their different sensor types. Copyright © 2014 Elsevier Ltd. All rights reserved.
-
ERIC Educational Resources Information Center
Pokharel, Siroj; Marcy, Joseph E.; Neilan, Angela M.; Cutter, Catherine N.
2017-01-01
This study addresses the development, dissemination, and assessment of a Food Safety System Management (FSSM) curriculum offered to college-aged, agribusiness students in Yerevan, Armenia. Prior to beginning the program, demographic data were collected and a paper-based pretest was administered to access the food safety knowledge, behavior, and…
-
ERIC Educational Resources Information Center
Cornell, Dewey; Maeng, Jennifer L.; Burnette, Anna Grace; Jia, Yuane; Huang, Francis; Konold, Timothy; Datta, Pooja; Malone, Marisa; Meyer, Patrick
2018-01-01
Threat assessment has been widely endorsed as a school safety practice, but there is little research on its implementation. In 2013, Virginia became the first state to mandate student threat assessment in its public schools. The purpose of this study was to examine the statewide implementation of threat assessment and to identify how threat…
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Curtis Smith; Diego Mandelli
Safety is central to the design, licensing, operation, and economics of nuclear power plants (NPPs). As the current light water reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of systems, structures, and components (SSC) degradations or failures that initiate safety significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very highmore » degree of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated primarily based on engineering judgment backed by a set of conservative engineering calculations. The ability to better characterize and quantify safety margin is important to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development (R&D) in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. To support decision making related to economics, readability, and safety, the RISMC Pathway provides methods and tools that enable mitigation options known as margins management strategies. The purpose of the RISMC Pathway R&D is to support plant decisions for risk
-
The SEURAT-1 approach towards animal free human safety assessment.
Gocht, Tilman; Berggren, Elisabet; Ahr, Hans Jürgen; Cotgreave, Ian; Cronin, Mark T D; Daston, George; Hardy, Barry; Heinzle, Elmar; Hescheler, Jürgen; Knight, Derek J; Mahony, Catherine; Peschanski, Marc; Schwarz, Michael; Thomas, Russell S; Verfaillie, Catherine; White, Andrew; Whelan, Maurice
2015-01-01
SEURAT-1 is a European public-private research consortium that is working towards animal-free testing of chemical compounds and the highest level of consumer protection. A research strategy was formulated based on the guiding principle to adopt a toxicological mode-of-action framework to describe how any substance may adversely affect human health.The proof of the initiative will be in demonstrating the applicability of the concepts on which SEURAT-1 is built on three levels:(i) Theoretical prototypes for adverse outcome pathways are formulated based on knowledge already available in the scientific literature on investigating the toxicological mode-of-actions leading to adverse outcomes (addressing mainly liver toxicity);(ii)adverse outcome pathway descriptions are used as a guide for the formulation of case studies to further elucidate the theoretical model and to develop integrated testing strategies for the prediction of certain toxicological effects (i.e., those related to the adverse outcome pathway descriptions);(iii) further case studies target the application of knowledge gained within SEURAT-1 in the context of safety assessment. The ultimate goal would be to perform ab initio predictions based on a complete understanding of toxicological mechanisms. In the near-term, it is more realistic that data from innovative testing methods will support read-across arguments. Both scenarios are addressed with case studies for improved safety assessment. A conceptual framework for a rational integrated assessment strategy emerged from designing the case studies and is discussed in the context of international developments focusing on alternative approaches for evaluating chemicals using the new 21st century tools for toxicity testing.
-
Assessment of occupational safety risks in Floridian solid waste systems using Bayesian analysis.
Bastani, Mehrad; Celik, Nurcin
2015-10-01
Safety risks embedded within solid waste management systems continue to be a significant issue and are prevalent at every step in the solid waste management process. To recognise and address these occupational hazards, it is necessary to discover the potential safety concerns that cause them, as well as their direct and/or indirect impacts on the different types of solid waste workers. In this research, our goal is to statistically assess occupational safety risks to solid waste workers in the state of Florida. Here, we first review the related standard industrial codes to major solid waste management methods including recycling, incineration, landfilling, and composting. Then, a quantitative assessment of major risks is conducted based on the data collected using a Bayesian data analysis and predictive methods. The risks estimated in this study for the period of 2005-2012 are then compared with historical statistics (1993-1997) from previous assessment studies. The results have shown that the injury rates among refuse collectors in both musculoskeletal and dermal injuries have decreased from 88 and 15 to 16 and three injuries per 1000 workers, respectively. However, a contrasting trend is observed for the injury rates among recycling workers, for whom musculoskeletal and dermal injuries have increased from 13 and four injuries to 14 and six injuries per 1000 workers, respectively. Lastly, a linear regression model has been proposed to identify major elements of the high number of musculoskeletal and dermal injuries. © The Author(s) 2015.
-
Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan
2015-01-01
Objective To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. Design A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). Setting 3 public hospitals and 27 health clinics. Participants 117 pharmacists. Main outcome measure(s) Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Results Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98). Conclusions A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety
-
Vaccine safety evaluation: Practical aspects in assessing benefits and risks.
Di Pasquale, Alberta; Bonanni, Paolo; Garçon, Nathalie; Stanberry, Lawrence R; El-Hodhod, Mostafa; Tavares Da Silva, Fernanda
2016-12-20
Vaccines are different from most medicines in that they are administered to large and mostly healthy populations including infants and children, so there is a low tolerance for potential risks or side-effects. In addition, the long-term benefits of immunisation in reducing or eliminating infectious diseases may induce complacency due to the absence of cases. However, as demonstrated in recent measles outbreaks in Europe and United States, reappearance of the disease occurs as soon as vaccine coverage falls. Unfounded vaccine scares such as those associating the combined measles-mumps-rubella vaccine with autism, and whole-cell pertussis vaccines with encephalopathy, can also have massive impacts, resulting in reduced vaccine uptake and disease resurgence. The safety assessment of vaccines is exhaustive and continuous; beginning with non-clinical evaluation of their individual components in terms of purity, stability and sterility, continuing throughout the clinical development phase and entire duration of use of the vaccine; including post-approval. The breadth and depth of safety assessments conducted at multiple levels by a range of independent organizations increases confidence in the rigour with which any potential risks or side-effects are investigated and managed. Industry, regulatory agencies, academia, the medical community and the general public all play a role in monitoring vaccine safety. Within these stakeholder groups, the healthcare professional and vaccine provider have key roles in the prevention, identification, investigation and management of adverse events following immunisation (AEFI). Guidelines and algorithms aid in determining whether AEFI may have been caused by the vaccine, or whether it is coincidental to it. Healthcare providers are encouraged to rigorously investigate AEFIs and to report them via local reporting processes. The ultimate objective for all parties is to ensure vaccines have a favourable benefit-risk profile. Copyright
-
NASA Astrophysics Data System (ADS)
Zhou, Lijun; Liu, Jisheng
2017-03-01
Tourism safety is gradually gaining more attention due to the rapid development of the tourism industry in China. Changbai Mountain is one of the most famous mountainous scenic areas in Northeast Asia. Assessment on Changbai Mountain scenic area’s tourism safety risk could do a favor in detecting influence factor of tourism safety risk and classifying tourism safety risk rank, thereby reducing and preventing associated tourism safety risks. This paper uses the Changbai Mountain scenic area as the study subject. By the means of experts scoring and analytic hierarchy process on quantified relevant evaluation indicator, the grid GIS method is used to vectorize the relevant data within a 1000m grid. It respectively analyzes main indicators associated tourism safety risk in Changbai Mountain scenic area, including hazard, exposure, vulnerability and ability to prevent and mitigate disasters. The integrated tourism safety risk model is used to comprehensively evaluate tourism safety risk in Changbai Mountain scenic area.
-
A fuzzy model for assessing risk of occupational safety in the processing industry.
Tadic, Danijela; Djapan, Marko; Misita, Mirjana; Stefanovic, Miladin; Milanovic, Dragan D
2012-01-01
Managing occupational safety in any kind of industry, especially in processing, is very important and complex. This paper develops a new method for occupational risk assessment in the presence of uncertainties. Uncertain values of hazardous factors and consequence frequencies are described with linguistic expressions defined by a safety management team. They are modeled with fuzzy sets. Consequence severities depend on current hazardous factors, and their values are calculated with the proposed procedure. The proposed model is tested with real-life data from fruit processing firms in Central Serbia.
-
Berggren, Elisabet; White, Andrew; Ouedraogo, Gladys; Paini, Alicia; Richarz, Andrea-Nicole; Bois, Frederic Y; Exner, Thomas; Leite, Sofia; Grunsven, Leo A van; Worth, Andrew; Mahony, Catherine
2017-11-01
We describe and illustrate a workflow for chemical safety assessment that completely avoids animal testing. The workflow, which was developed within the SEURAT-1 initiative, is designed to be applicable to cosmetic ingredients as well as to other types of chemicals, e.g. active ingredients in plant protection products, biocides or pharmaceuticals. The aim of this work was to develop a workflow to assess chemical safety without relying on any animal testing, but instead constructing a hypothesis based on existing data, in silico modelling, biokinetic considerations and then by targeted non-animal testing. For illustrative purposes, we consider a hypothetical new ingredient x as a new component in a body lotion formulation. The workflow is divided into tiers in which points of departure are established through in vitro testing and in silico prediction, as the basis for estimating a safe external dose in a repeated use scenario. The workflow includes a series of possible exit (decision) points, with increasing levels of confidence, based on the sequential application of the Threshold of Toxicological (TTC) approach, read-across, followed by an "ab initio" assessment, in which chemical safety is determined entirely by new in vitro testing and in vitro to in vivo extrapolation by means of mathematical modelling. We believe that this workflow could be applied as a tool to inform targeted and toxicologically relevant in vitro testing, where necessary, and to gain confidence in safety decision making without the need for animal testing.
-
Assessment of Driving Safety in Older Adults with Mild Cognitive Impairment.
Anstey, Kaarin J; Eramudugolla, Ranmalee; Chopra, Sidhant; Price, Jasmine; Wood, Joanne M
2017-01-01
With population aging, drivers with mild cognitive impairment (MCI) are increasing; however, there is little evidence available regarding their safety. We aimed to evaluate risk of unsafe on-road driving performance among older adults with MCI. The study was a cross-sectional observational study, set in Canberra, Australia. Participants were non-demented, current drivers (n = 302) aged 65 to 96 years (M = 75.7, SD = 6.18, 40% female) recruited through the community and primary and tertiary care clinics. Measures included a standardized on-road driving test (ORT), a battery of screening measures designed to evaluate older driver safety (UFOV®, DriveSafe, Multi-D), a neurocognitive test battery, and questionnaires on driving history and behavior. Using Winblad criteria, 57 participants were classified as having MCI and 245 as cognitively normal (CN). While the MCI group had a significantly lower overall safety rating on the ORT (5.61 versus 6.05, p = 0.03), there was a wide range of driving safety scores in the CN and MCI groups. The MCI group performed worse than the CN group on the off-road screening tests. The best fitting model of predictors of ORT performance across the combined sample included age, the Multi-D, and DriveSafe, classifying 90.4% of the sample correctly. Adults with MCI exhibit a similar range of driving ability to CN adults, although on average they scored lower on off-road and on-road assessments. Driving specific tests were more strongly associated with safety ratings than traditional neuropsychological tests.
-
Assessment of Driving Safety in Older Adults with Mild Cognitive Impairment
Anstey, Kaarin J.; Eramudugolla, Ranmalee; Chopra, Sidhant; Price, Jasmine; Wood, Joanne M.
2017-01-01
Background: With population aging, drivers with mild cognitive impairment (MCI) are increasing; however, there is little evidence available regarding their safety. Objective: We aimed to evaluate risk of unsafe on-road driving performance among older adults with MCI. Method: The study was a cross-sectional observational study, set in Canberra, Australia. Participants were non-demented, current drivers (n = 302) aged 65 to 96 years (M = 75.7, SD = 6.18, 40% female) recruited through the community and primary and tertiary care clinics. Measures included a standardized on-road driving test (ORT), a battery of screening measures designed to evaluate older driver safety (UFOV®, DriveSafe, Multi-D), a neurocognitive test battery, and questionnaires on driving history and behavior. Results: Using Winblad criteria, 57 participants were classified as having MCI and 245 as cognitively normal (CN). While the MCI group had a significantly lower overall safety rating on the ORT (5.61 versus 6.05, p = 0.03), there was a wide range of driving safety scores in the CN and MCI groups. The MCI group performed worse than the CN group on the off-road screening tests. The best fitting model of predictors of ORT performance across the combined sample included age, the Multi-D, and DriveSafe, classifying 90.4% of the sample correctly. Conclusion: Adults with MCI exhibit a similar range of driving ability to CN adults, although on average they scored lower on off-road and on-road assessments. Driving specific tests were more strongly associated with safety ratings than traditional neuropsychological tests. PMID:28372333
-
Assessment of the culture of safety in public hospitals in Brazil 1
de Carvalho, Rhanna Emanuela Fontenele Lima; Arruda, Lidyane Parente; do Nascimento, Nayanne Karen Pinheiro; Sampaio, Renata Lopes; Cavalcante, Maria Lígia Silva Nunes; Costa, Ana Carolina Pinto
2017-01-01
ABSTRACT Objective: to assess the culture of safety in three public hospitals. Method: transversal study undertaken in three Brazilian public hospitals, with health professionals through applying the Safety Attitudes Questionnaire (SAQ). Scores greater than or equal to 75 were considered positive. Results: a total of 573 professionals participated in the study, including nurse technicians and auxiliary nurses 292 (51%), nurses 105 (18.3%), physicians 59 (10.3%), and other professionals 117 (20.4%). The mean of the SAQ varied between 65 and 69 in the three hospitals. Among the domains, however, 'Job satisfaction' presented a higher score, and the opposite was observed for the domain 'Perceptions of management'. The outsourced professionals presented a better perception of the culture of safety than did the statutory professionals. The professionals with higher education presented a better perception of the stressing factors than did the professionals educated to senior high school level. Conclusion: the level of the culture of safety found is below the ideal. The managerial actions are considered the main contributing factor to the culture's weakness; however, the professionals demonstrated themselves to be satisfied with the work. PMID:28301029
-
Safety assessment for EPS electron-proton spectrometer
NASA Technical Reports Server (NTRS)
Gleeson, P.
1971-01-01
A safety analysis was conducted to identify the efforts required to assure relatively hazard free operation of the EPS and to meet the safety requirements of the program. Safety engineering criteria, principles, and techniques in applicable disciplines are stressed in the performance of the system and subsystem studies; in test planning; in the design, development, test, evaluation, and checkout of the equipment; and the operating procedures for the EPS program.
-
Edwards, Mervyn; Nathanson, Andrew; Carroll, Jolyon; Wisch, Marcus; Zander, Oliver; Lubbe, Nils
2015-01-01
Autonomous emergency braking (AEB) systems fitted to cars for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programs-for example, the European New Car Assessment Programme (Euro NCAP)-are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully is how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit-related basis. The objective of this research was to develop a benefit-based methodology for assessment of integrated pedestrian protection systems with AEB and passive safety components. The method should include weighting procedures to ensure that it represents injury patterns from accident data and replicates an independently estimated benefit of AEB. A methodology has been developed to calculate the expected societal cost of pedestrian injuries, assuming that all pedestrians in the target population (i.e., pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car's AEB (if fitted) and the passive safety protection offered by the car's frontal structure. For rating purposes, the cost for the assessed car is normalized by comparing it to the cost calculated for a reference car. The speed reductions measured in AEB tests are used to determine the speed at which each pedestrian in the target population will be impacted. Injury probabilities for each impact are then calculated using the results from Euro NCAP pedestrian impactor tests and injury risk curves. These injury probabilities are converted into cost using "harm"-type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and Great Britain and an independently
-
Impact of biomarker development on drug safety assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marrer, Estelle, E-mail: estelle.marrer@novartis.co; Dieterle, Frank
2010-03-01
Drug safety has always been a key aspect of drug development. Recently, the Vioxx case and several cases of serious adverse events being linked to high-profile products have increased the importance of drug safety, especially in the eyes of drug development companies and global regulatory agencies. Safety biomarkers are increasingly being seen as helping to provide the clarity, predictability, and certainty needed to gain confidence in decision making: early-stage projects can be stopped quicker, late-stage projects become less risky. Public and private organizations are investing heavily in terms of time, money and manpower on safety biomarker development. An illustrative andmore » 'door opening' safety biomarker success story is the recent recognition of kidney safety biomarkers for pre-clinical and limited translational contexts by FDA and EMEA. This milestone achieved for kidney biomarkers and the 'know how' acquired is being transferred to other organ toxicities, namely liver, heart, vascular system. New technologies and molecular-based approaches, i.e., molecular pathology as a complement to the classical toolbox, allow promising discoveries in the safety biomarker field. This review will focus on the utility and use of safety biomarkers all along drug development, highlighting the present gaps and opportunities identified in organ toxicity monitoring. A last part will be dedicated to safety biomarker development in general, from identification to diagnostic tests, using the kidney safety biomarkers success as an illustrative example.« less
-
Assessing safety awareness and knowledge and behavioral change among West Virginia loggers
Helmkamp, J; Bell, J; Lundstrom, W; Ramprasad, J; Haque, A
2004-01-01
Objective: To determine if a video used during logger training influences safety attitude, knowledge, and workplace habits. Method: From April 2002 to October 2003, loggers receiving training through the West Virginia Division of Forestry were given a new safety module. This consisted of a pre-training survey, viewing video, brief introduction to field safety guide, and an immediate post-training survey. Six months after training, loggers were contacted by telephone to assess workplace behavioral changes. Results: 1197 loggers attended 80 training sessions and completed surveys; 21% were contacted at follow up. Pre-training surveys indicated that half said "accidents" were part of the job and had experienced a "close call" in their work. An overwhelming majority felt that safety management and periodic meetings were important. Over 75% indicated they would not take risks in order to make a profit. Several statistically significant improvements were noted in safety knowledge after viewing the video: logger's location in relation to the tree stump during fatal incidents and the pictorial identification of an overloaded truck and the safest cutting notch. At follow up, many of the loggers said they related to the real life victim stories portrayed in the video. Further, the field guide served as a quick and easy reference and taught them valuable tips on safe cutting and felling. Conclusions: Significant changes in safety knowledge and attitude among certified loggers resulted from viewing the video during training. Subsequent use of the video and field guide at the worksite encouraged positive change in self reported work habits and practices. PMID:15314051
-
Safety Assessment of Diethanolamine and Its Salts as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of diethanolamine and its salts as used in cosmetics. Diethanolamine functions as a pH adjuster; the 16 salts included in this rereview reportedly function as surfactants, emulsifying agents, viscosity increasing agents, hair or skin conditioning agents, foam boosters, or antistatic agents. The Panel reviewed available animal and clinical data, as well as information from previous CIR reports. Since data were not available for each individual ingredient, and since the salts dissociate freely in water, the Panel extrapolated from previous reports to support safety. The Panel concluded that diethanolamine and its salts are safe for use when formulated to be nonirritating. These ingredients should not be used in cosmetic products in which N-nitroso compounds can be formed.
-
van Rijssen, Fredrika W Jansen; Morris, E Jane; Eloff, Jacobus N
2013-09-04
The importance of food composition in safety assessments of genetically modified (GM) food is described for cassava ( Manihot esculenta Crantz) that naturally contains significantly high levels of cyanogenic glycoside (CG) toxicants in roots and leaves. The assessment of the safety of GM cassava would logically require comparison with a non-GM crop with a proven "history of safe use". This study investigates this statement for cassava. A non-GM comparator that qualifies would be a processed product with CG level below the approved maximum level in food and that also satisfies a "worst case" of total dietary consumption. Although acute and chronic toxicity benchmark CG values for humans have been determined, intake data are scarce. Therefore, the non-GM cassava comparator is defined on the "best available knowledge". We consider nutritional values for cassava and conclude that CG residues in food should be a priority topic for research.
-
Fundamentals of health risk assessment. Use, derivation, validity and limitations of safety indices.
Putzrath, R M; Wilson, J D
1999-04-01
We investigated the way results of human health risk assessments are used, and the theory used to describe those methods, sometimes called the "NAS paradigm." Contrary to a key tenet of that theory, current methods have strictly limited utility. The characterizations now considered standard, Safety Indices such as "Acceptable Daily Intake," "Reference Dose," and so on, usefully inform only decisions that require a choice between two policy alternatives (e.g., approve a food additive or not), decided solely on the basis of a finding of safety. Risk is characterized as the quotient of one of these Safety Indices divided by an estimate of exposure: a quotient greater than one implies that the situation may be considered safe. Such decisions are very widespread, both in the U.S. federal government and elsewhere. No current method is universal; different policies lead to different practices, for example, in California's "Proposition 65," where statutory provisions specify some practices. Further, an important kind of human health risk assessment is not recognized by this theory: this kind characterizes risk as likelihood of harm, given estimates of exposure consequent to various decision choices. Likelihood estimates are necessary whenever decision makers have many possible decision choices and must weigh more than two societal values, such as in EPA's implementation of "conventional air pollutants." These estimates can not be derived using current methods; different methods are needed. Our analysis suggests changes needed in both the theory and practice of human health risk assessment, and how what is done is depicted.
-
The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment
NASA Astrophysics Data System (ADS)
Coppari, S.; Di Pasquale, G.; Goretti, A.; Papa, F.; Papa, S.; Paoli, G.; Pizza, A. G.; Severino, M.
2008-07-01
The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspection teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through wide
-
Assessment of safety culture in isfahan hospitals (2010).
Raeisi, Ahmed Reza; Nazari, Maryam; Bahmanziari, Najme
2013-01-01
Many internal and external risk factors in health care organizations make safety important and it has caused the management to consider safety in their mission statement. One of the most important tools is to establish the appropriate organizational structure and safety culture. The goal of this research is to inform managers and staff about current safety culture status in hospitals in order to improve the efficiency and effectiveness of health services. This is a descriptive-survey research. The research population was selected hospitals of Isfahan, Iran. Research tool was a questionnaire (Cronbach alpha 0.75). The questionnaire including 93 questions (Likert scale) classified in 12 categories: Demographic questions, Individual attitude, management attitude, Safety Training, Induced stress, pressure and emotional conditions during work, Consultation and participation, Communications, Monitoring and control, work environment, Reporting, safety Rules, procedures and work instructions that distributed among 45 technicians, 208 Nurses and 62 Physicians. All data collected from the serve was analysis with statistical package of social science (SPSS). In this survey Friedman test, Spearman correlation, analysis of variance (ANOVA) and factor analysis have been used for data analyzing. The score of safety culture dimensions was 2.90 for Individual attitude, 3.12 for management attitude, 3.32 for Safety Training, 3.14 for Induced stress, pressure and emotional conditions during work, 3.31 for Consultation and participation, 2.93 for Communications, 3.28 for Monitoring and control, 3.19 for work environment, 3.36 for Reporting, 3.59 safety Rules, procedures and work instructions that Communication and individual attitude were in bad condition. Safety culture among different hospitals: governmental and educational, governmental and non-educational and non-governmental and different functional groups (physicians, nurses, diagnostic) of studied hospitals showed no
-
Cleaning and asthma: A systematic review and approach for effective safety assessment.
Vincent, Melissa J; Parker, Ann; Maier, Andrew
2017-11-01
Research indicates a correlative relationship between asthma and use of consumer cleaning products. We conduct a systematic review of epidemiological literature on persons who use or are exposed to cleaning products, both in occupational and domestic settings, and risk of asthma or asthma-like symptoms to improve understanding of the causal relationship between exposure and asthma. A scoring method for assessing study reliability is presented. Although research indicates an association between asthma and the use of cleaning products, no study robustly investigates exposure to cleaning products or ingredients along with asthma risk. This limits determination of causal relationships between asthma and specific products or ingredients in chemical safety assessment. These limitations, and a lack of robust animal models for toxicological assessment of asthma, create the need for a weight-of-evidence (WoE) approach to examine an ingredient or product's asthmatic potential. This proposed WoE method organizes diverse lines of data (i.e., asthma, sensitization, and irritation information) through a systematic, hierarchical framework that provides qualitatively categorized conclusions using hazard bands to predict a specific product or ingredient's potential for asthma induction. This work provides a method for prioritizing chemicals as a first step for quantitative and scenario-specific safety assessments based on their potential for inducing asthmatic effects. Acetic acid is used as a case study to test this framework. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.
-
Liver safety assessment in special populations (hepatitis B, C, and oncology trials).
Kullak-Ublick, Gerd A; Merz, Michael; Griffel, Louis; Kaplowitz, Neil; Watkins, Paul B
2014-11-01
The FDA guidance for industry in the premarketing clinical evaluation of drug-induced liver injury (DILI) is the most specific regulatory guidance currently available and has been useful in setting standards for the great majority of clinical indications involving subjects with a low risk of liver disorders. However, liver safety assessment faces challenges in populations with underlying liver disease, such as viral hepatitis or metastatic cancer. This is an important issue because there are currently many promising anti-viral and oncologic therapies in clinical development, with a trend toward oral therapies with reduced side effects. Without clearer guidelines, questions regarding liver safety may become a major factor in regulatory approval and ultimately physician uptake of the new treatments. The lack of consensus in defining stopping rules based on serum alanine aminotransferase (ALT) levels underscores the need for precompetitive data sharing to improve our understanding of DILI in these populations and to allow evidence-based rather than empirical definition of stopping rules. A workshop was convened to discuss best practices for the assessment of drug-induced liver injury (DILI) in clinical trials.
-
Aiassa, E; Higgins, J P T; Frampton, G K; Greiner, M; Afonso, A; Amzal, B; Deeks, J; Dorne, J-L; Glanville, J; Lövei, G L; Nienstedt, K; O'connor, A M; Pullin, A S; Rajić, A; Verloo, D
2015-01-01
Food and feed safety risk assessment uses multi-parameter models to evaluate the likelihood of adverse events associated with exposure to hazards in human health, plant health, animal health, animal welfare, and the environment. Systematic review and meta-analysis are established methods for answering questions in health care, and can be implemented to minimize biases in food and feed safety risk assessment. However, no methodological frameworks exist for refining risk assessment multi-parameter models into questions suitable for systematic review, and use of meta-analysis to estimate all parameters required by a risk model may not be always feasible. This paper describes novel approaches for determining question suitability and for prioritizing questions for systematic review in this area. Risk assessment questions that aim to estimate a parameter are likely to be suitable for systematic review. Such questions can be structured by their "key elements" [e.g., for intervention questions, the population(s), intervention(s), comparator(s), and outcome(s)]. Prioritization of questions to be addressed by systematic review relies on the likely impact and related uncertainty of individual parameters in the risk model. This approach to planning and prioritizing systematic review seems to have useful implications for producing evidence-based food and feed safety risk assessment.
-
Risk assessment for safety laboratories in Politeknik Negeri Medan
NASA Astrophysics Data System (ADS)
Viyata Sundawa, Bakti; Hutajulu, Elferida; Sirait, Regina; Banurea, Waldemar; Indrayadi; Mulyadi, Sangap
2017-09-01
International Labour Organization (ILO) estimated 2.34 million people die each year because accidents and diseases in workplace. It also impact to economic losses in some countries. It need to do safety and healthy in working environment especially in laboratory. Identification of potential hazards and risks must be done in Telecommunication Laboratory Politeknik Negeri Medan. Therefore, this study was assessed 5 of potential hazards and risks in our laboratory by Likert Scale. This object was divided into 2 assessment namely likelihood of hazards and severity of consequences. Collecting data is taken from questionnaire who involved 100 students at random academic level. The result showed The highest score is chemical hazards 73.2% in likelihood of hazards and electrical hazards 85% in severity of consequences. This condition is classified as “high” state. Big attention must be given to “high” state because it can help us to determine mitigate action.
-
Elsous, Aymen; Akbari Sari, Ali; Rashidian, Arash; Aljeesh, Yousef; Radwan, Mahmoud; AbuZaydeh, Hatem
2016-12-01
To measure and establish a baseline assessment of the patient safety culture in the Palestinian hospitals. A cross-sectional descriptive study using the Arabic version of the Safety Attitude Questionnaire (Short Form 2006). A total of 339 nurses and physicians returned the questionnaire out of 370 achieving a response rate of 91.6%. Four public general hospitals in the Gaza Strip, Palestine. Nurses and physicians were randomly selected using a proportionate random sampling. Data analysis performed using Statistical Package for the Social Sciences software version 20, and p value less than 0.05 was statistically significant. Current status of patient safety culture among healthcare providers and percentage of positive attitudes. Male to female ratio was 2.16:1, and mean age was 36.5 ± 9.4 years. The mean score of Arabic Safety Attitude Questionnaire across the six dimensions on 100-point scale ranged between 68.5 for Job Satisfaction and 48.5 for Working Condition. The percentage of respondents holding a positive attitude was 34.5% for Teamwork Climate, 28.4% for Safety Climate, 40.7% for Stress Recognition, 48.8% for Job Satisfaction, 11.3% for Working Conditions and 42.8% for Perception of Management. Healthcare workers holding positive attitudes had better collaboration with co-workers than those without positive attitudes. Findings are useful to formulate a policy on patient safety culture and targeted a specific safety culture dimension to improve the safety of patients and improve the clinical outcomes within healthcare organisations.
-
Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan
2015-11-26
To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). 3 public hospitals and 27 health clinics. 117 pharmacists. Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98). A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety culture. As perceptions improved, the number of medication errors reported
-
Hoffmann, B; Müller, V; Rochon, J; Gondan, M; Müller, B; Albay, Z; Weppler, K; Leifermann, M; Mießner, C; Güthlin, C; Parker, D; Hofinger, G; Gerlach, F M
2014-01-01
The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations. In this study we assessed the effects of FraTrix on safety culture in general practice. We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12 months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. During the team sessions, practice teams reflected on their safety culture and decided on about 10 actions per practice to improve it. After 12 months, no significant differences were found between intervention and control groups in terms of error management (competing probability=0.48, 95% CI 0.34 to 0.63, p=0.823), 11 further patient safety culture indicators and safety climate scales. Intervention practices showed better reporting of patient safety incidents, reflected in a higher number of incident reports (mean (SD) 4.85 (4.94) vs 3.10 (5.42), p=0.045) and incident reports of higher quality (scoring 2.27 (1.93) vs 1.49 (1.67), p=0.038) than control practices. Applied as a team-based instrument to assess safety culture, FraTrix did not lead to measurable improvements in error management. Comparable studies with more positive results had less robust study designs. In future research, validated combined methods to measure safety culture will be required. In addition, more attention should be paid to evaluation of process parameters. Implemented actions and incident reporting may be more appropriate target endpoints. German Clinical Trials Register (Deutsches Register
-
Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Browne, E.T.
1981-03-01
This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.
-
Use of assessment to reinforce patient safety as a habit
Galbraith, R M; Holtman, M C; Clyman, S G
2006-01-01
The US spends far more than any other nation on health care. Physicians undergo lengthy and comprehensive training that is carefully scrutinized, and are held to high standards in national examinations. At best the care delivered matches or exceeds that in any other country. And yet, often simple preventable medical errors occur at alarming and unacceptable rates. The public, corporate consumers of health care, large payors and malpractice insurance carriers are all becoming impatient with the pace of improvement. The medical profession recognizes that dealing with this problem is an urgent priority and is grappling to find the best approaches. This paper focuses on the constructive use of assessment to embed a pervasive and proactive culture of patient safety into practice, starting with the trainee and extending out into the practice years. This strategy is based on the adage that “assessment drives curriculum” and proposes a series of new assessment tools to be added to all phases of the training‐practice continuum. PMID:17142605
-
Surgical team member assessment of the safety of surgery practice in 38 South Carolina hospitals.
Singer, Sara J; Jiang, Wei; Huang, Lyen C; Gibbons, Lorri; Kiang, Mathew V; Edmondson, Lizabeth; Gawande, Atul A; Berry, William R
2015-06-01
We assessed surgical team member perceptions of multiple dimensions of safe surgical practice in 38 South Carolina hospitals participating in a statewide initiative to implement surgical safety checklists. Primary data were collected using a novel 35-item survey. We calculated the percentage of 1,852 respondents with strongly positive, positive, and neutral/negative responses about the safety of surgical practice, compared results by hospital and professional discipline, and examined how readiness, teamwork, and adherence related to staff perception of care quality. Overall, 78% of responses were positive about surgical safety at respondent's hospitals, but in each survey dimension, from 16% to 40% of responses were neutral/negative, suggesting significant opportunity to improve surgical safety. Respondents not reporting they would feel safe being treated in their operating rooms varied from 0% to 57% among hospitals. Surgeons responded more positively than nonsurgeons. Readiness, teamwork, and practice adherence related directly to staff perceptions of patient safety (p < .001). © The Author(s) 2015.
-
Parker, Dianne
2009-03-01
To provide sufficient information about the Manchester Patient Safety Framework (MaPSaF) to allow healthcare professionals to assess its potential usefulness. The assessment of safety culture is an important aspect of risk management, and one in which there is increasing interest among healthcare organizations. Manchester Patient Safety Framework offers a theory-based framework for assessing safety culture, designed specifically for use in the NHS. The framework covers multiple dimensions of safety culture, and five levels of safety culture development. This allows the generation of a profile of an organization's safety culture in terms of areas of relative strength and challenge, which can be used to identify focus issues for change and improvement. Manchester Patient Safety Framework provides a useful method for engaging healthcare professionals in assessing and improving the safety culture in their organization, as part of a programme of risk management.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Erlenwein, P.; Frisch, W.; Kafka, P.
Nuclear reactors of 200- to 400-MW(thermal) power for district heating are the subject of increasing interest, and several specific designs are under discussion today. In the Federal Republic of Germany (FRG), the Kraftwerk Union AG has presented a 200-MW(thermal) heating reactor concept. The main safety issues of this design are assessed. In this design, the primary system is fully integrated into the reactor pressure vessel (RPV), which is tightly enclosed by the containment. The low process parameters like pressure, temperature, and power density and the high ratio of coolant volume to thermal power allow the design of simple safety features.more » This is supported by the preference of passive over active components. A special feature is a newly designed hydraulic control and rod drive mechanism, which is also integrated into the RPV. Within the safety assessment an overview of the relevant FRG safety rules and guidelines, developed mainly for large, electricity-generating power plants, is given. Included is a discussion of the extent to which these licensing rules can be applied to the concept of heating reactors.« less
-
Geoelectrical Methods and Monitoring for Dam Safety Assessment, Republic of Korea
NASA Astrophysics Data System (ADS)
Lim, S. K.; Oldenburg, D.; Kang, S.; Song, S. H.
2016-12-01
Geoelectrical methods and monitoring to detect the seepage and internal erosion are essential for the safety assessment of earth dams. This work aims to develop improved methodologies to analyze the observed data and to monitor changes in seepage flow using direct current (DC) and self-potential (SP) methods. The seasonal variation of water level at dams causes a change in seepage and water saturation and hence alters the resistivity of the dam material. DC data are sensitive to water saturation and hence changes in saturation can be obtained by repeatedly measuring DC data. However, a more diagnostic parameter for safety assessment is fluid flow, and resistivity is only weakly coupled to that. Fortunately SP signals are directly related to fluid flow, and thus an SP survey has the potential to characterize fluid flow through the earth matrix. In Korea, the safety assessment of earth fill dams has been dealt by Korea Rural Community Corporation (KRC). Most of the dams are relatively old ( >50 years), hence assessing deterioration and corresponding seepage of those dams are crucial. In order to evaluate the engineering geological properties of the soil at earth dams in Korea, two boreholes in each dam were drilled to a bedrock depth that exceeds the height of the dam. A large set of field tests, including standard penetration tests (SPT) and in-situ permeability tests, were carried out along the boreholes. However, seepage paths in the dam is complex hence those limited measurements at a few points is not sufficient to delineate the zone of preferential seepage flow. For this, KRC developed permanent DC monitoring systems at a number of agricultural dams in Korea. The data were automatically collected every 6 hours. During the monitoring, the measurements of the water level at two boreholes were gathered at the same time. In this presentation we select an agricultural dam and delineate an anomalous leakage zone by inverting and interpreting time-lapse DC resistivity
-
Alsalem, Gheed; Bowie, Paul; Morrison, Jillian
2018-05-10
The perceived importance of safety culture in improving patient safety and its impact on patient outcomes has led to a growing interest in the assessment of safety climate in healthcare organizations; however, the rigour with which safety climate tools were developed and psychometrically tested was shown to be variable. This paper aims to identify and review questionnaire studies designed to measure safety climate in acute hospital settings, in order to assess the adequacy of reported psychometric properties of identified tools. A systematic review of published empirical literature was undertaken to examine sample characteristics and instrument details including safety climate dimensions, origin and theoretical basis, and extent of psychometric evaluation (content validity, criterion validity, construct validity and internal reliability). Five questionnaire tools, designed for general evaluation of safety climate in acute hospital settings, were included. Detailed inspection revealed ambiguity around concepts of safety culture and climate, safety climate dimensions and the methodological rigour associated with the design of these measures. Standard reporting of the psychometric properties of developed questionnaires was variable, although evidence of an improving trend in the quality of the reported psychometric properties of studies was noted. Evidence of the theoretical underpinnings of climate tools was limited, while a lack of clarity in the relationship between safety culture and patient outcome measures still exists. Evidence of the adequacy of the psychometric development of safety climate questionnaire tools is still limited. Research is necessary to resolve the controversies in the definitions and dimensions of safety culture and climate in healthcare and identify related inconsistencies. More importance should be given to the appropriate validation of safety climate questionnaires before extending their usage in healthcare contexts different from those in
-
Use of Foodomics for Control of Food Processing and Assessing of Food Safety.
Josić, D; Peršurić, Ž; Rešetar, D; Martinović, T; Saftić, L; Kraljević Pavelić, S
Food chain, food safety, and food-processing sectors face new challenges due to globalization of food chain and changes in the modern consumer preferences. In addition, gradually increasing microbial resistance, changes in climate, and human errors in food handling remain a pending barrier for the efficient global food safety management. Consequently, a need for development, validation, and implementation of rapid, sensitive, and accurate methods for assessment of food safety often termed as foodomics methods is required. Even though, the growing role of these high-throughput foodomic methods based on genomic, transcriptomic, proteomic, and metabolomic techniques has yet to be completely acknowledged by the regulatory agencies and bodies. The sensitivity and accuracy of these methods are superior to previously used standard analytical procedures and new methods are suitable to address a number of novel requirements posed by the food production sector and global food market. © 2017 Elsevier Inc. All rights reserved.
-
Comunale, Mark E; Sandoval, Mathew; Broussard, La Toya
2018-06-01
During safety rounds, we observed few residents demonstrating hand hygiene and patient identification as they began their postgraduate clinical training. We assessed baseline performance of these 2 basic safety skills in residents entering the first year of postgraduate clinical training (PGY1). PGY1 residents beginning training on July 1, 2013, and July 1, 2014, at our institution were examined using a simulated scenario testing for hand hygiene and patient identification. Nurse volunteers posed as patients and evaluated each resident using a standardized scoring tool. Residents were observed for the following behaviors when interacting: (1) hand hygiene before or upon entry into the patient's room (HHE); (2) resident introducing himself or herself (INTRO); (3) resident identifying patient (IDNB); (4) resident comparing patient's stated name and date of birth to patient's ID band (IDC); (5) resident explaining procedure to patient (EXP); and (6) resident performing hand hygiene upon exiting patient's room (HHL). A total of 114 residents were examined. Compliance results were as follows: HHE at 66% (75); INTRO at 96% (110); IDNB at 52% (59); IDC at 42% (48); EXP at 90% (103); and HHL at 58% (66). Developing and hardwiring basic patient safety skills is essential for creating an institutional culture of safety. We used a simulated patient scenario to provide a baseline assessment of 2 important safety skills.The results obtained demonstrate poor compliance with hand hygiene and patient identification. Our results suggest that there is a need for additional training and perhaps new methods of training and reinforcement in medical school and beyond, to hardwire these basic patient safety skills.
-
Sologuren, Ander; Vinas, Rosa; Cordon, Esther; Riesgo, Susana E; Del Mar Fores, Maria; Senan, Maria Rosa; Fernandez, Sonia; Labeaga, Luis; Ruiz-Mijan, Manuel
2018-03-20
Bilastine is an H1-antihistamine approved for symptomatic treatment of patients with allergic rhinoconjunctivitis or urticaria. The safety profile of bilastine in clinical trials of allergic rhinoconjunctivitis or urticaria, assessed by type and frequency of adverse events (AE), was similar to that of placebo. As part of the risk management plan for bilastine, the safety profile of bilastine in the elderly was assessed. A prospective, multicenter, observational, open-label, 3-month follow-up study was performed to assess the safetyprofile of bilastine 20 mg in patients aged greater than or equal to 65 years with allergic rhinoconjunctivitis and/or urticaria. A total of 74 of 146 patients (50.7%) reported 129 treatment-emergent AEs (TEAE) during the study period. Theincidence of TEAEs was low, with monthly and quarterly rates of 0.29 (95% confidence intervals [CI], 0.229-0.367) and 0.88(95% CI, 0.688 -1.100), respectively. Monthly and quarterly incidence rates were 0.04 (95% CI, 0.016-0.082) and 0.12 (95%CI, 0.048-0.246), respectively, for related TEAEs (eight TEAEs in seven patients) and were 0.02 (95% CI, 0.003- 0.048) and0.05 (95% CI, 0.010-0.143), respectively, for serious TEAEs (five TEAES in three patients). All serious TEAEs were considered to be unrelated to bilastine. Bilastine 20 mg showed a favorable safety profile with a low incidence of TEAEs in patients aged greater than or equal to 65 years.The results were in accordance with the known safety profile of bilastine 20 mg and incidence of AEs reported in previous studies and described in the approved summary of product characteristics.
-
Brodmann, Theodor; Endo, Akihito; Gueimonde, Miguel; Vinderola, Gabriel; Kneifel, Wolfgang; de Vos, Willem M.; Salminen, Seppo; Gómez-Gallego, Carlos
2017-01-01
Novel microbes are either newly isolated genera and species from natural sources or bacterial strains derived from existing bacteria. Novel microbes are gaining increasing attention for the general aims to preserve and modify foods and to modulate gut microbiota. The use of novel microbes to improve health outcomes is of particular interest because growing evidence points to the importance of gut microbiota in human health. As well, some recently isolated microorganisms have promise for use as probiotics, although in-depth assessment of their safety is necessary. Recent examples of microorganisms calling for more detailed evaluation include Bacteroides xylanisolvens, Akkermansia muciniphila, fructophilic lactic acid bacteria (FLAB), and Faecalibacterium prausnitzii. This paper discusses each candidate's safety evaluation for novel food or novel food ingredient approval according to European Union (EU) regulations. The factors evaluated include their beneficial properties, antibiotic resistance profiling, history of safe use (if available), publication of the genomic sequence, toxicological studies in agreement with novel food regulations, and the qualified presumptions of safety. Sufficient evidences have made possible to support and authorize the use of heat-inactivated B. xylanisolvens in the European Union. In the case of A. muciniphila, the discussion focuses on earlier safety studies and the strain's suitability. FLAB are also subjected to standard safety assessments, which, along with their proximity to lactic acid bacteria generally considered to be safe, may lead to novel food authorization in the future. Further research with F. prausnitzii will increase knowledge about its safety and probiotic properties and may lead to its future use as novel food. Upcoming changes in EUU Regulation 2015/2283 on novel food will facilitate the authorization of future novel products and might increase the presence of novel microbes in the food market. PMID:28955311
-
Fiume, Monice; Bergfeld, Wilma F; Belsito, Donald V; Klaassen, Curtis D; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Alan Andersen, F
2010-05-01
Sodium cetearyl sulfate is the sodium salt of a mixture of cetyl and stearyl sulfate. The other ingredients in this safety assessment are also alkyl salts, including ammonium coco-sulfate, ammonium myristyl sulfate, magnesium coco-sulfate, sodium cetyl sulfate, sodium coco/hydrogenated tallow sulfate, sodium coco-sulfate, sodium decyl sulfate, sodium ethylhexyl sulfate, sodium myristyl sulfate, sodium oleyl sulfate, sodium stearyl sulfate, sodium tallow sulfate, sodium tridecyl sulfate, and zinc coco-sulfate. These ingredients are surfactants used at concentrations from 0.1% to 29%, primarily in soaps and shampoos. Many of these ingredients are not in current use. The Cosmetic Ingredient Review (CIR) Expert Panel previously completed a safety assessment of sodium and ammonium lauryl sulfate. The data available for sodium lauryl sulfate and ammonium lauryl sulfate provide sufficient basis for concluding that sodium cetearyl sulfate and related alkyl sulfates are safe in the practices of use and concentration described in the safety assessment.
-
Christenson, Elizabeth; Bain, Robert; Wright, Jim; Aondoakaa, Stephen; Hossain, Rifat; Bartram, Jamie
2014-08-15
Reducing inequalities is a priority from a human rights perspective and in water and public health initiatives. There are periodic calls for differential national and global standards for rural and urban areas, often justified by the suggestion that, for a given water source type, safety is worse in urban areas. For instance, initially proposed post-2015 water targets included classifying urban but not rural protected dug wells as unimproved. The objectives of this study were to: (i) examine the influence of urban extent definition on water safety in Nigeria, (ii) compare the frequency of thermotolerant coliform (TTC) contamination and prevalence of sanitary risks between rural and urban water sources of a given type and (iii) investigate differences in exposure to contaminated drinking-water in rural and urban areas. We use spatially referenced data from a Nigerian national randomized sample survey of five improved water source types to assess the extent of any disparities in urban-rural safety. We combined the survey data on TTC and sanitary risk with map layers depicting urban versus rural areas according to eight urban definitions. When examining water safety separately for each improved source type, we found no significant urban-rural differences in TTC contamination and sanitary risk for groundwater sources (boreholes and protected dug wells) and inconclusive findings for piped water and stored water. However, when improved and unimproved source types were combined, TTC contamination was 1.6 to 2.3 times more likely in rural compared to urban water sources depending on the urban definition. Our results suggest that different targets for urban and rural water safety are not justified and that rural dwellers are more exposed to unsafe water than urban dwellers. Additionally, urban-rural analyses should assess multiple definitions or indicators of urban to assess robustness of findings and to characterize a gradient that disaggregates the urban-rural dichotomy
-
Safety assessment of adjuvanted vaccines: Methodological considerations
Da Silva, Fernanda Tavares; Di Pasquale, Alberta; Yarzabal, Juan P; Garçon, Nathalie
2015-01-01
Adjuvants mainly interact with the innate immune response and are used to enhance the quantity and quality of the downstream adaptive immune response to vaccine antigens. Establishing the safety of a new adjuvant-antigen combination is achieved through rigorous evaluation that begins in the laboratory, and that continues throughout the vaccine life-cycle. The strategy for the evaluation of safety pre-licensure is guided by the disease profile, vaccine indication, and target population, and it is also influenced by available regulatory guidelines. In order to allow meaningful interpretation of clinical data, clinical program methodology should be optimized and standardized, making best use of all available data sources. Post-licensure safety activities are directed by field experience accumulated pre- and post-licensure clinical trial data and spontaneous adverse event reports. Continued evolution of safety evaluation processes that keep pace with advances in vaccine technology and updated communication of the benefit-risk profile is necessary to maintain public confidence in vaccines. PMID:26029975
-
2016-05-09
electromagnetic environment for which they are designed to be used. These tests are performed on a powered weapon during simulated normal operation and are...010B SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS Joint Services Munition Safety Test Working Group JOTP...12 6.8 Test Sample Quantities .......................................................... 13 7. PRE- AND POST - TEST INSPECTIONS
-
Safety Assessment of Ethanolamine and Ethanolamine Salts as Used in Cosmetics.
Fiume, Monice M; Heldreth, Bart A; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-09-01
The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of ethanolamine and 12 salts of ethanolamine as used in cosmetics. Ethanolamine functions as a pH adjuster. The majority of the salts are reported to function as surfactants, and the others are reported to function as pH adjusters, hair fixatives, or preservatives. The Panel reviewed available animal and clinical data, as well as information from previous relevant CIR reports. Because data were not available for each individual ingredient and because the salts dissociate freely in water, the Panel extrapolated from those previous reports to support safety. The Panel concluded that these ingredients are safe in the present practices of use and concentrations (rinse-off products only) when formulated to be nonirritating, and these ingredients should not be used in cosmetic products in which N-nitroso compounds may be formed. © The Author(s) 2015.
-
Pediatric post-marketing safety systems in North America: assessment of the current status.
McMahon, Ann W; Wharton, Gerold T; Bonnel, Renan; DeCelle, Mary; Swank, Kimberley; Testoni, Daniela; Cope, Judith U; Smith, Phillip Brian; Wu, Eileen; Murphy, Mary Dianne
2015-08-01
It is critical to have pediatric post-marketing safety systems that contain enough clinical and epidemiological detail to draw regulatory, public health, and clinical conclusions. The pediatric safety surveillance workshop (PSSW), coordinated by the Food and Drug Administration (FDA), identified these pediatric systems as of 2010. This manuscript aims to update the information from the PSSW and look critically at the systems currently in use. We reviewed North American pediatric post-marketing safety systems such as databases, networks, and research consortiums found in peer-reviewed journals and other online sources. We detail clinical examples from three systems that FDA used to assess pediatric medical product safety. Of the 59 systems reviewed for pediatric content, only nine were pediatric-focused and met the inclusion criteria. Brief descriptions are provided for these nine. The strengths and weaknesses of three systems (two of the nine pediatric-focused and one including both children and adults) are illustrated with clinical examples. Systems reviewed in this manuscript have strengths such as clinical detail, a large enough sample size to capture rare adverse events, and/or a patient denominator internal to the database. Few systems include all of these attributes. Pediatric drug safety would be better informed by utilizing multiple systems to take advantage of their individual characteristics. Copyright © 2015 John Wiley & Sons, Ltd.
-
Findings from the ISMP Medication Safety Self-Assessment for hospitals.
Smetzer, Judy L; Vaida, Allen J; Cohen, Michael R; Tranum, Diane; Pittman, Mary A; Armstrong, Carl W
2003-11-01
Hospital medication practices should be assessed, awareness of the characteristics of a safe medication system heightened, and baseline data to identify national priorities established. A cross-sectional survey of U.S. hospitals (N = 6,180) was conducted in May 2000. The survey instrument contained 194 self-assessment items organized into 20 core characteristics and 10 larger domains. Hospitals were asked to voluntarily submit their confidential assessment data to the Institute for Safe Medication Practices (ISMP) for aggregate analysis. A weighting structure was applied to the individual items and used to calculate core characteristic scores, domain scores, and overall self-assessment scores. These scores were then compared to identify areas most in need of improvement. The 1,435 participating hospitals scored highest in domains related to drug storage and distribution; environmental factors; infusion pumps; and medication labeling, packaging, and nomenclature issues. These hospitals scored lowest in domains related to accessible patient information, communication of medication orders, patient education, and quality processes such as double-check systems and organizational culture. Enormous opportunities exist to improve medication safety, especially in domains related to culture, information management, and communication.
-
An Operational Safety and Certification Assessment of a TASAR EFB Application
NASA Technical Reports Server (NTRS)
Koczo, Stefan; Wing, David
2013-01-01
This paper presents an overview of a Traffic Aware Strategic Aircrew Requests (TASAR) Electronic Flight Bag application intended to inform the pilot of trajectory improvement opportunities while en route that result in operational benefits. The results of safety analyses and a detailed review of Federal Aviation Administration (FAA) regulatory documents that establish certification and operational approval requirements are presented for TASAR. The safety analyses indicate that TASAR has a likely Failure Effects Classification of “No Effect,” and at most, is no worse than “Minor Effect.” Based on this safety assessment and the detailed review of FAA regulatory documents that determine certification and operational approval requirements, this study concludes that TASAR can be implemented in the flight deck as a Type B software application hosted on a Class 2 Portable Electronic Device (PED) Electronic Flight Bag (EFB). This implementation approach would provide a relatively low-cost path to certification and operational approval for both retrofit and forward fit implementation, while at the same time facilitating the business case for early ADS-B IN equipage. A preliminary review by FAA certification and operational approvers of the analyses presented here confirmed that the conclusions are appropriate and that TASAR will be considered a Type B application.
-
AADL Fault Modeling and Analysis Within an ARP4761 Safety Assessment
2014-10-01
Analysis Generator 27 3.2.3 Mapping to OpenFTA Format File 27 3.2.4 Mapping to Generic XML Format 28 3.2.5 AADL and FTA Mapping Rules 28 3.2.6 Issues...PSSA), System Safety Assessment (SSA), Common Cause Analysis (CCA), Fault Tree Analysis ( FTA ), Failure Modes and Effects Analysis (FMEA), Failure...Modes and Effects Summary, Mar - kov Analysis (MA), and Dependence Diagrams (DDs), also referred to as Reliability Block Dia- grams (RBDs). The
-
Electrochemical genosensors in food safety assessment.
Martín-Fernández, Begoña; Manzanares-Palenzuela, C Lorena; Sánchez-Paniagua López, Marta; de-Los-Santos-Álvarez, Noemí; López-Ruiz, Beatriz
2017-09-02
The main goal of food safety assessment is to provide reliable information on the identity and composition of food and reduce the presence of harmful components. Nowadays, there are many countries where rather than the presence of pathogens, common public concerns are focused on the presence of hidden allergens, fraudulent practices, and genetic modifications in food. Accordingly, food regulations attempt to offer a high level of protection and to guarantee transparent information to the consumers. The availability of analytical methods is essential to comply these requirements. Protein-based strategies are usually employed for this purpose, but present some limitations. Because DNA is a more stable molecule, present in most tissues, and can be amplified, there has been an increasing interest in developing DNA-based approaches (polymerase chain reaction, microarrays, and genosensors). In this regard, electrochemical genosensors may play a major role in fulfilling the needs of food industry, such as reliable, portable, and affordable devices. This work reviews the achievements of this technology applied to allergen detection, species identification, and genetically modified organisms testing. We summarized the legislative framework, current design strategies in sensor development, their analytical characteristics, and future prospects.
-
Darius, S; Meyer, F; Böckelmann, I
2016-11-01
Surgeons routinely work in an environment with occupational risks and hazards about which they are often uninformed. Based on the currently available scientific literature this review article describes the various hazards in the operating theater and their effects on personnel, particularly from the surgical perspective. A further aim of this article is to describe the occupational safety measures to reduce the burdens and to maintain the long-term health of personnel. Ultimately, surgeons should be equipped with the necessary knowledge for implementing hazard assessments according to the German Occupational Health and Safety Act. Surgeons are exposed to increased risks and hazards by working in awkward positions with a high risk for musculoskeletal pain and injuries. They are also commonly exposed to inhalational anesthetics, surgical smoke, radiation, noise and infectious agents. Furthermore, the mental and emotional stress associated with these activities is also high. Meaningful occupational safety measures for reduction of burdens are from a technical aspect the installation of effective air extraction systems, measures to reduce exposure to radiation and noise and the use of safer instruments to prevent needle stick injuries. Furthermore, individual occupational safety measures, such as the use of personal protective equipment (e.g. radiation protective clothing and double gloves) must be observed. The consistent implementation and also adherence to these described occupational safety measures and regulations can reduce the burden on operating theater personnel and contribute to maintaining health. Furthermore, periodic preventive healthcare controls and health checks by the company medical officer and individually initiated additional prevention measures can be a sensible augmentation to these safety measures.
-
A Geospatial Mixed Methods Approach to Assessing Campus Safety
ERIC Educational Resources Information Center
Hites, Lisle S.; Fifolt, Matthew; Beck, Heidi; Su, Wei; Kerbawy, Shatomi; Wakelee, Jessica; Nassel, Ariann
2013-01-01
Background: While there is no panacea for alleviating campus safety concerns, safety experts agree that one of the key components to an effective campus security plan is monitoring the environment. Despite previous attempts to measure campus safety, quantifying perceptions of fear, safety, and risk remains a challenging issue. Since perceptions of…
-
Safety analysis of interchanges
DOT National Transportation Integrated Search
2007-06-01
The objectives of this research are to synthesize the current state of knowledge concerning the safety assessment of new or modified interchanges; develop a spreadsheet-based computational tool for performing safety assessments of interchanges; and i...
-
The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coppari, S.; Di Pasquale, G.; Goretti, A.
2008-07-08
The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspectionmore » teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through
-
Development of a methodology for assessing the safety of embedded software systems
NASA Technical Reports Server (NTRS)
Garrett, C. J.; Guarro, S. B.; Apostolakis, G. E.
1993-01-01
A Dynamic Flowgraph Methodology (DFM) based on an integrated approach to modeling and analyzing the behavior of software-driven embedded systems for assessing and verifying reliability and safety is discussed. DFM is based on an extension of the Logic Flowgraph Methodology to incorporate state transition models. System models which express the logic of the system in terms of causal relationships between physical variables and temporal characteristics of software modules are analyzed to determine how a certain state can be reached. This is done by developing timed fault trees which take the form of logical combinations of static trees relating the system parameters at different point in time. The resulting information concerning the hardware and software states can be used to eliminate unsafe execution paths and identify testing criteria for safety critical software functions.
-
Shur, P Z; Zaĭtseva, N V; Alekseev, V B; Shliapnikov, D M
2015-01-01
In accordance with the international documents in the field of occupational safety and hygiene, the assessment and minimization of occupational risks is a key instrument for the health maintenance of workers. One of the main ways to achieve it is the minimization of occupational risks. Correspondingly, the instrument for the implementation of this method is the methodology of analysis of occupational risks. In Russian Federation there were the preconditions for the formation of the system for the assessment and management of occupational risks. As the target of the national (state) policy in the field of occupational safety in accordance with ILO Conventions it can be offered the prevention of accidents and injuries to health arising from work or related with it, minimizing the causes of hazards inherent in the working environment, as far as it is reasonably and practically feasible. Global trend ofusing the methodology of the assessment and management of occupational risks to life and health of citizens requires the improvement of national policies in the field of occupational hygiene and safety. Achieving an acceptable level of occupational risk in the formation of national policy in the field of occupational hygiene and safety can be considered as one of the main tasks.
-
Safety Teams: An Approach to Engage Students in Laboratory Safety
ERIC Educational Resources Information Center
Alaimo, Peter J.; Langenhan, Joseph M.; Tanner, Martha J.; Ferrenberg, Scott M.
2010-01-01
We developed and implemented a yearlong safety program into our organic chemistry lab courses that aims to enhance student attitudes toward safety and to ensure students learn to recognize, demonstrate, and assess safe laboratory practices. This active, collaborative program involves the use of student "safety teams" and includes…
-
75 FR 45591 - Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-03
... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Committee Meetings AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...
-
Daly, P; Moran, G
2015-10-01
Acetyl aspartic acid (A-A-A) was proposed as a new novel active ingredient for use in cosmetics. The safety of A-A-A was assessed by following an in-house-developed 'New Ingredient Testing Strategy', which was designed in accordance with the Scientific Committee on Consumer Safety (SCCS) notes of guidance and the requirements of Annex I of the EU Cosmetics Regulation. The aim of the project was to determine whether A-A-A was safe for use in cosmetics and to determine a maximum permitted safe level in the formulations. A literature review was conducted, consulting over 40 different information sources. This highlighted a number of gaps which required testing data. A-A-A was tested for phototoxicity according to OECD test guideline 432, skin irritation according to OECD test guideline 439 and eye irritation according to OECD test guideline 437. Dermal absorption of A-A-A was measured according to OECD test guideline 428 and was used to calculate the margin of safety (MoS). Finally, A-A-A was tested in a human repeat insult patch test (HRIPT) and a 14-day in-use tolerance study. A-A-A was non-phototoxic and was non-irritating to skin and eyes in in vitro testing. Dermal absorption was calculated to be 5%. The MoS for A-A-A was 351, at a level of 5%, for all cosmetic product types, indicating no systemic safety toxicity concern. A-A-A at 5% under occlusive patch on a panel of 50 adult volunteers induced no skin irritation or allergic reaction in the HRIPT study. Finally, repeated application of A-A-A to the periocular area, twice per day for 14 days, in 21 female volunteers, demonstrated that 1% A-A-A was well tolerated following dermatological and ophthalmological assessment in a cosmetic formulation. A-A-A was assessed as safe by the cosmetic safety assessor for use in cosmetics at a level of 5% in all cosmetic product types, in line with the requirements of the EU Cosmetics Regulation and in accordance with the SCCS notes of guidance. © 2015 Society of Cosmetic
-
The risk/safety assessment of transgenic crops: the transportability of data.
Kearns, Peter; Dagallier, Bertrand; Suwabe, Kazuyuki
2014-12-01
This paper presents the activities and publications of Organisation for Economic Co-operation and Developments (OECD's) Working Group on Harmonisation of Regulatory Oversight in Biotechnology and the Task Force for the Safety of Novel Foods and Feeds. The main outputs of the work are the Series of "consensus documents" of the respective groups. These documents compile information which is intended to be used by those involved in the business of risk/safety assessment. These documents are one means of ensuring the transportability of data amongst authorities. An increasing trend in both the Working Group and Task Force is to consider crop species which are relevant to tropical regions and therefore to countries that are not necessarily members of the OECD. For example, the Working Group has recently published a consensus document on bananas and plantains while the Task Force has published a document on cassava. This trend towards crops of greater interest in the tropics is likely to continue into the future.
-
Cannabis for the Management of Pain: Assessment of Safety Study (COMPASS).
Ware, Mark A; Wang, Tongtong; Shapiro, Stan; Collet, Jean-Paul
2015-12-01
Cannabis is widely used as a self-management strategy by patients with a wide range of symptoms and diseases including chronic non-cancer pain. The safety of cannabis use for medical purposes has not been systematically evaluated. We conducted a prospective cohort study to describe safety issues among individuals with chronic non-cancer pain. A standardized herbal cannabis product (12.5% tetrahydrocannabinol) was dispensed to eligible individuals for a 1-year period; controls were individuals with chronic pain from the same clinics who were not cannabis users. The primary outcome consisted of serious adverse events and non-serious adverse events. Secondary safety outcomes included pulmonary and neurocognitive function and standard hematology, biochemistry, renal, liver, and endocrine function. Secondary efficacy parameters included pain and other symptoms, mood, and quality of life. Two hundred and fifteen individuals with chronic pain were recruited to the cannabis group (141 current users and 58 ex-users) and 216 controls (chronic pain but no current cannabis use) from 7 clinics across Canada. The median daily cannabis dose was 2.5 g/d. There was no difference in risk of serious adverse events (adjusted incidence rate ratio = 1.08, 95% confidence interval = .57-2.04) between groups. Medical cannabis users were at increased risk of non-serious adverse events (adjusted incidence rate ratio = 1.73, 95% confidence interval = 1.41-2.13); most were mild to moderate. There were no differences in secondary safety assessments. Quality-controlled herbal cannabis, when used by patients with experience of cannabis use as part of a monitored treatment program over 1 year, appears to have a reasonable safety profile. Longer-term monitoring for functional outcomes is needed. The study was registered with www.controlled-trials.com (ISRCTN19449752). This study evaluated the safety of cannabis use by patients with chronic pain over 1 year. The study found that there was a higher
-
Safety Training--A Special Case?
ERIC Educational Resources Information Center
Cooper, Mark; Cotton, David
2000-01-01
Review of research on industrial training and occupational safety and health did not find materials on training safely or risk assessment for training. A study of 34 safety inspectors indicated that risk decision making and assessment are serious concerns that should be addressed in safety training. (Contains 56 references.) (SK)
-
Starkey, Sarah J
2016-12-01
The Advisory Group on Non-ionising Radiation (AGNIR) 2012 report forms the basis of official advice on the safety of radiofrequency (RF) electromagnetic fields in the United Kingdom and has been relied upon by health protection agencies around the world. This review describes incorrect and misleading statements from within the report, omissions and conflict of interest, which make it unsuitable for health risk assessment. The executive summary and overall conclusions did not accurately reflect the scientific evidence available. Independence is needed from the International Commission on Non-Ionizing Radiation Protection (ICNIRP), the group that set the exposure guidelines being assessed. This conflict of interest critically needs to be addressed for the forthcoming World Health Organisation (WHO) Environmental Health Criteria Monograph on Radiofrequency Fields. Decision makers, organisations and individuals require accurate information about the safety of RF electromagnetic signals if they are to be able to fulfil their safeguarding responsibilities and protect those for whom they have legal responsibility.
-
Constable, A; Jonas, D; Cockburn, A; Davi, A; Edwards, G; Hepburn, P; Herouet-Guicheney, C; Knowles, M; Moseley, B; Oberdörfer, R; Samuels, F
2007-12-01
Very few traditional foods that are consumed have been subjected to systematic toxicological and nutritional assessment, yet because of their long history and customary preparation and use and absence of evidence of harm, they are generally regarded as safe to eat. This 'history of safe use' of traditional foods forms the benchmark for the comparative safety assessment of novel foods, and of foods derived from genetically modified organisms. However, the concept is hard to define, since it relates to an existing body of information which describes the safety profile of a food, rather than a precise checklist of criteria. The term should be regarded as a working concept used to assist the safety assessment of a food product. Important factors in establishing a history of safe use include: the period over which the traditional food has been consumed; the way in which it has been prepared and used and at what intake levels; its composition and the results of animal studies and observations from human exposure. This paper is aimed to assist food safety professionals in the safety evaluation and regulation of novel foods and foods derived from genetically modified organisms, by describing the practical application and use of the concept of 'history of safe use'.
-
Safety assessment tool for construction zone work phasing plans
DOT National Transportation Integrated Search
2016-05-01
The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for : analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as : wor...
-
Assessing patient safety culture in Tunisian operating rooms: A multicenter study.
Mallouli, Manel; Tlili, Mohamed Ayoub; Aouicha, Wiem; Ben Rejeb, Mohamed; Zedini, Chekib; Salwa, Amrani; Mtiraoui, Ali; Ben Dhiab, Mohamed; Ajmi, Thouraya
2017-04-01
To assess the patient safety culture (PSC) in operating rooms (ORs) and to determine influencing factors. A cross-sectional descriptive multicenter study which was conducted over a period of 7 months (October 2014-April 2015) using the French validated version of the Hospital Survey On Patient Safety Culture questionnaire. Of the note, 15 ORs of public and private healthcare institutions. In total, there were 368 participants including surgeons, anesthesiologists, surgical and anesthesia technicians, nurses and caregivers, divided into 316 professionals exercising in public sector and 52 working in private one. A self-administrated questionnaire investigating 10 dimensions of PSC (including 45 items), two items examining the staff perception of patient safety quality and reporting events, and five items regarding demographic characteristics of respondents. The participation rate in the study was 70.8%. All 10 dimensions were to be improved. The overall perception of patient safety had a score of 34.9%. The dimension that had the lowest score (20.5%) was the non-punitive response to error, and the one that had the highest score (41.67%) was teamwork in the ORs. Three dimensions were developed in private sector, and none in public hospitals. This study showed that the level of the PSC needs to be improved not only in public hospitals but also in private ones. The obtained results highlight the importance of implementing quality management systems and developing PSC. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com
-
Assessment of patient safety culture in clinical laboratories in the Spanish National Health System.
Giménez-Marín, Angeles; Rivas-Ruiz, Francisco; García-Raja, Ana M; Venta-Obaya, Rafael; Fusté-Ventosa, Margarita; Caballé-Martín, Inmaculada; Benítez-Estevez, Alfonso; Quinteiro-García, Ana I; Bedini, José Luis; León-Justel, Antonio; Torra-Puig, Montserrat
2015-01-01
There is increasing awareness of the importance of transforming organisational culture in order to raise safety standards. This paper describes the results obtained from an evaluation of patient safety culture in a sample of clinical laboratories in public hospitals in the Spanish National Health System. A descriptive cross-sectional study was conducted among health workers employed in the clinical laboratories of 27 public hospitals in 2012. The participants were recruited by the heads of service at each of the participating centers. Stratified analyses were performed to assess the mean score, standardized to a base of 100, of the six survey factors, together with the overall patient safety score. 740 completed questionnaires were received (88% of the 840 issued). The highest standardized scores were obtained in Area 1 (individual, social and cultural) with a mean value of 77 (95%CI: 76-78), and the lowest ones, in Area 3 (equipment and resources), with a mean value of 58 (95%CI: 57-59). In all areas, a greater perception of patient safety was reported by the heads of service than by other staff. We present the first multicentre study to evaluate the culture of clinical safety in public hospital laboratories in Spain. The results obtained evidence a culture in which high regard is paid to safety, probably due to the pattern of continuous quality improvement. Nevertheless, much remains to be done, as reflected by the weaknesses detected, which identify areas and strategies for improvement.
-
Proactive assessment of accident risk to improve safety on a system of freeways : [research brief].
DOT National Transportation Integrated Search
2012-05-01
As traffic safety on freeways continues to be a growing concern, much progress has been made in shifting from reactive (incident detection) to proactive (real-time crash risk assessment) traffic strategies. Reliable models that can take in real-time ...
-
Soon, J M; Davies, W P; Chadd, S A; Baines, R N
2013-02-15
The objective of this study was to develop a farm food safety-risk assessment tool (FRAMp) which serves as a self-assessment and educational tool for fresh produce farms. FRAMp was developed in Microsoft® Excel spreadsheet software using standard mathematical and logical functions and utilised a qualitative risk assessment approach for farmers to evaluate their food safety practices. The FRAMp tool has since been tested on 12 fresh produce farms throughout UK. All the farms determined that FRAMp was interesting but 17% found it too long while 25% of the farms felt the tool was too complicated. The instructions on FRAMp usage were revised and farmers were given the options to skip and select specific steps in the farm risk assessment. The end users (farmers/farm managers) determined that developing their own action plans and using it as proof of assessment for future third-party audits were most useful to them. FRAMp tool can be described as an illustrative risk ranking tool to facilitate farms to identify potential risk factors during their crop production. Copyright © 2012 Elsevier Ltd. All rights reserved.
-
Morrow, Stephanie L; McGonagle, Alyssa K; Dove-Steinkamp, Megan L; Walker, Curtis T; Marmet, Matthew; Barnes-Farrell, Janet L
2010-09-01
The goals of this study were twofold: (1) to confirm a relationship between employee perceptions of psychological safety climate and safety behavior for a sample of workers in the rail industry and (2) to explore the relative strengths of relationships between specific facets of safety climate and safety behavior. Non-management rail maintenance workers employed by a large North American railroad completed a survey (n=421) regarding workplace safety perceptions and behaviors. Three facets of safety climate (management safety, coworker safety, and work-safety tension) were assessed as relating to individual workers' reported safety behavior. All three facets were significantly associated with safety behavior. Dominance analysis was used to assess the relative importance of each facet as related to the outcome, and work-safety tension evidenced the strongest relationship with safety behavior. Published by Elsevier Ltd.
-
An Assessment of Levels of Safety in Psychiatric Units.
Bayramzadeh, Sara
2017-01-01
This article aims to understand the incident patterns in relation to different types of spaces within a psychiatric unit, which are discussed using the five levels of safety framework. Implementing measures to improve patient safety is essential particularly in a psychiatric hospital, where limited research has been conducted on inpatient safety. Therefore, this article aims to understand the incident patterns from the lens of the five levels of safety framework, which categorizes spaces according to the level of patient supervision in psychiatric facilities, as follows: service areas, corridors, dayrooms, patient rooms and bathrooms, seclusions and admissions. In an 81-bed psychiatric hospital, this mixed-method study drew 7 years of incident reports and caregivers' perceptions gathered through focus groups. Incident reports on physical safety were analyzed based on the five levels of safety framework ( N = 1,316). Focus groups ( n = 9) explored the caregivers' viewpoints on patient safety and five categories of spaces. Overall findings support the five levels of safety pattern, confirming that most incidents occurred in patient rooms and bathrooms; moreover, relatively fewer incidents happened in dayrooms and corridors. Elopements are higher in hallways and dayrooms. Suicide is most common in patient rooms and bathrooms, and violence is more frequent in dayrooms. Focus groups results yielded insightful recommendations. Levels of safety framework can be adapted to seven categories where seclusion room and admission area would be two of the spaces with least incidents.
-
Interleukin-18 and NGAL in assessment of ESWL treatment safety in children with urolithiasis
Jobs, Katarzyna; Straż-Żebrowska, Ewa; Placzyńska, Małgorzata; Zdanowski, Robert; Lewicki, Sławomir; Jung, Anna
2014-01-01
Urolithiasis is recurrent chronic disease and a complex nephro-urological problem. Currently it is diagnosed in very young children, even infants in the first quarter of life. Until recently the main method of treatment for stones, which for various reasons did not pass spontaneously, was open surgery. At present, the main method replacing open surgery is extracorporeal shock wave lithotripsy (ESWL). Usefulness of common known indicators of the renal function to assess the safety of ESWL procedure is evaluated and verified. The basic markers are serum creatinine, cystatin C, urea, glomerular filtration rate and albuminuria assessment. Unfortunately all these methods show little sensitivity in the case of acute injury processes. There are efforts to use new biomarkers of renal tubular activity, which include among others interleukin 18 (IL-18) and neutrophil gelatinase-associated lipocalin (NGAL). The aim of the study was to assess the safety of ESWL by means of albumin to creatinine ratio, serum cystatin C levels and concentration of two new markers: IL -18 and NGAL. Albumin to creatinine ratio (p = 0.28) and serum cystatin C (p = 0.63) collected before and 48 hours after ESWL did not show statistically significant differences. Similarly, both new markers (IL -18 and NGAL) showed no significant differences (urine IL -18 p = 0.31; serum NGAL p = 0.11; urine NGAL p = 0.29). In conclusion, serum cystatin C tests, urine albumin to creatinine ratio and new early markers of renal tubular injury confirmed the safety of the extracorporeal shock wave lithotripsy (ESWL) and show that the procedure does not cause any episode of acute renal injury. PMID:26155152
-
Patient safety in phlebology: The ACP Phlebology Safety Checklist.
Collares, Felipe Birchal; Sonde, Mehru; Harper, Kenneth; Armitage, Michael; Neuhardt, Diana L; Fronek, Helane S
2018-05-01
Objectives To assess the current use of safety checklists among the American College of Phlebology (ACP) members and their interest in implementing a checklist supported by the ACP on their clinical practices; and to develop a phlebology safety checklist. Method Online surveys were sent to ACP members, and a phlebology safety checklist was developed by a multispecialty team through the ACP Leadership Academy. Results Forty-seven percent of respondents are using a safety checklist in their practices; 23% think that a phlebology safety checklist would interfere or disrupt workflow; 79% answered that a phlebology safety checklist could improve procedure outcomes or prevent complications; and 85% would be interested in implementing a phlebology safety checklist approved by the ACP. Conclusion A phlebology safety checklist was developed with the intent to increase awareness on patient safety and improve outcome in phlebology practice.
-
ERIC Educational Resources Information Center
Rasmussen, Chris; Johnson, Gina
2008-01-01
This report is the result of a nationwide survey conducted in March 2008 of student life officers and campus safety directors to assess the impact of the April 2007 shootings at Virginia Tech on campus safety and security policy and practice. Discussion areas include: (1) Student Privacy vs. Need-to-Know; (2) Prevention, Mitigation and Recovery;…
-
Application of in vitro based safety assessment requires reconciling chemical concentrations sufficient to produce bioactivity in vitro with those that trigger a molecular initiating event at the relevant in vivo target site. To address such need, computational tools such as phy...
-
Broschard, Thomas H; Glowienke, Susanne; Bruen, Uma S; Nagao, Lee M; Teasdale, Andrew; Stults, Cheryl L M; Li, Kim L; Iciek, Laurie A; Erexson, Greg; Martin, Elizabeth A; Ball, Douglas J
2016-11-01
Leachables from pharmaceutical container closure systems can present potential safety risks to patients. Extractables studies may be performed as a risk mitigation activity to identify potential leachables for dosage forms with a high degree of concern associated with the route of administration. To address safety concerns, approaches to toxicological safety evaluation of extractables and leachables have been developed and applied by pharmaceutical and biologics manufacturers. Details of these approaches may differ depending on the nature of the final drug product. These may include application, the formulation, route of administration and length of use. Current regulatory guidelines and industry standards provide general guidance on compound specific safety assessments but do not provide a comprehensive approach to safety evaluations of leachables and/or extractables. This paper provides a perspective on approaches to safety evaluations by reviewing and applying general concepts and integrating key steps in the toxicological evaluation of individual extractables or leachables. These include application of structure activity relationship studies, development of permitted daily exposure (PDE) values, and use of safety threshold concepts. Case studies are provided. The concepts presented seek to encourage discussion in the scientific community, and are not intended to represent a final opinion or "guidelines." Copyright © 2016 Elsevier Inc. All rights reserved.
-
Chittaro, Luca; Buttussi, Fabio
2015-04-01
Thanks to the increasing availability of consumer head-mounted displays, educational applications of immersive VR could now reach to the general public, especially if they include gaming elements (immersive serious games). Safety education of citizens could be a particularly promising domain for immersive serious games, because people tend not to pay attention to and benefit from current safety materials. In this paper, we propose an HMD-based immersive game for educating passengers about aviation safety that allows players to experience a serious aircraft emergency with the goal of surviving it. We compare the proposed approach to a traditional aviation safety education method (the safety card) used by airlines. Unlike most studies of VR for safety knowledge acquisition, we do not focus only on assessing learning immediately after the experience but we extend our attention to knowledge retention over a longer time span. This is a fundamental requirement, because people need to retain safety procedures in order to apply them when faced with danger. A knowledge test administered before, immediately after and one week after the experimental condition showed that the immersive serious game was superior to the safety card. Moreover, subjective as well as physiological measurements employed in the study showed that the immersive serious game was more engaging and fear-arousing than the safety card, a factor that can contribute to explain the obtained superior retention, as we discuss in the paper.
-
Waste Isolation Safety Assessment Program. Technical progress report for FY-1978
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brandstetter, A.; Harwell, M.A.; Howes, B.W.
1979-07-01
Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of makingmore » those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis. (DC)« less
-
Collet, J. P.; MacDonald, N.; Cashman, N.; Pless, R.
2000-01-01
Monitoring vaccine safety is a complex and shared responsibility. It can be carried out in many ways, one of which is the reporting of individual cases of adverse reactions thought to be due to vaccination. The task is difficult because ascribing causality to an individual case report is fraught with challenges. A standardized evaluation instrument--known as the causality assessment form--was therefore developed for use by an expert advisory committee to facilitate the process. By following the several sections in this form, the members of the committee are taken through a series of points to establish causality. These points include the basic criteria for causation such as biological plausibility, the time elapsed between the vaccine administration and the onset of the adverse event, and whether other factors (drugs, chemicals or underlying disease) could account for the adverse symptoms. The form concludes with a consensus assessment of causality, a commentary about the assessment, and advice for further study or follow-up. This method of assessing the more serious cases of adverse reaction reported to vaccination has proven useful in evaluating ongoing safety of vaccines in Canada. Through analyses such as this, new signals can be identified and investigated further. PMID:10743282
-
Safety Assessment of Boron Nitride as Used in Cosmetics.
Fiume, Monice M; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2015-01-01
The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of boron nitride which functions in cosmetics as a slip modifier (ie, it has a lubricating effect). Boron nitride is an inorganic compound with a crystalline form that can be hexagonal, spherical, or cubic; the hexagonal form is presumed to be used in cosmetics. The highest reported concentration of use of boron nitride is 25% in eye shadow formulations. Although boron nitride nanotubes are produced, boron nitride is not listed as a nanomaterial used in cosmetic formulations. The Panel reviewed available chemistry, animal data, and clinical data and concluded that this ingredient is safe in the present practices of use and concentration in cosmetic formulations. © The Author(s) 2015.
-
Waste isolation safety assessment program. Task 4. Third contractor information meeting
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1980-06-01
The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less
-
Stanley, Ian H; Hom, Melanie A; Rogers, Megan L; Anestis, Michael D; Joiner, Thomas E
2017-01-01
The goal of this study was to describe the relative utility of the terms "means safety" versus "means restriction" in counseling individuals to limit their access to firearms in the context of a mock suicide risk assessment. Overall, 370 participants were randomized to read a vignette depicting a clinical scenario in which managing firearm ownership and access was discussed either using the term "means safety" or "means restriction." Participants rated the term "means safety" as significantly more acceptable and preferable than "means restriction." Participants randomized to the "means safety" condition reported greater intentions to adhere to clinicians' recommendations to limit access to a firearm for safety purposes (F[1,367] = 7.393, p = .007, [Formula: see text]). The term "means safety" may be more advantageous than "means restriction" when discussing firearm ownership and access in clinical settings and public health-oriented suicide prevention efforts.
-
Keohane, Carol A; Bates, David W
2008-03-01
Patient safety is a state of mind, not a technology. The technologies used in the medical setting represent tools that must be properly designed, used well, and assessed on an on-going basis. Moreover, in all settings, building a culture of safety is pivotal for improving safety, and many nontechnologic approaches, such as medication reconciliation and teaching patients about their medications, are also essential. This article addresses the topic of medication safety and examines specific strategies being used to decrease the incidence of medication errors across various clinical settings.
-
NASA Technical Reports Server (NTRS)
Cassell, Rick; Smith, Alex; Connors, Mary; Wojciech, Jack; Rosekind, Mark R. (Technical Monitor)
1996-01-01
As new technologies and procedures are introduced into the National Airspace System, whether they are intended to improve efficiency, capacity, or safety level, the quantification of potential changes in safety levels is of vital concern. Applications of technology can improve safety levels and allow the reduction of separation standards. An excellent example is the Precision Runway Monitor (PRM). By taking advantage of the surveillance and display advances of PRM, airports can run instrument parallel approaches to runways separated by 3400 feet with the same level of safety as parallel approaches to runways separated by 4300 feet using the standard technology. Despite a wealth of information from flight operations and testing programs, there is no readily quantifiable relationship between numerical safety levels and the separation standards that apply to aircraft on final approach. This paper presents a modeling approach to quantify the risk associated with reducing separation on final approach. Reducing aircraft separation, both laterally and longitudinally, has been the goal of several aviation R&D programs over the past several years. Many of these programs have focused on technological solutions to improve navigation accuracy, surveillance accuracy, aircraft situational awareness, controller situational awareness, and other technical and operational factors that are vital to maintaining flight safety. The risk assessment model relates different types of potential aircraft accidents and incidents and their contribution to overall accident risk. The framework links accident risks to a hierarchy of failsafe mechanisms characterized by procedures and interventions. The model will be used to assess the overall level of safety associated with reducing separation standards and the introduction of new technology and procedures, as envisaged under the Free Flight concept. The model framework can be applied to various aircraft scenarios, including parallel and in
-
Thomas, Craig E; Will, Yvonne
2012-02-01
Attrition in the drug industry due to safety findings remains high and requires a shift in the current safety testing paradigm. Many companies are now positioning safety assessment at each stage of the drug development process, including discovery, where an early perspective on potential safety issues is sought, often at chemical scaffold level, using a variety of emerging technologies. Given the lengthy development time frames of drugs in the pharmaceutical industry, the authors believe that the impact of new technologies on attrition is best measured as a function of the quality and timeliness of candidate compounds entering development. The authors provide an overview of in silico and in vitro models, as well as more complex approaches such as 'omics,' and where they are best positioned within the drug discovery process. It is important to take away that not all technologies should be applied to all projects. Technologies vary widely in their validation state, throughput and cost. A thoughtful combination of validated and emerging technologies is crucial in identifying the most promising candidates to move to proof-of-concept testing in humans. In spite of the challenges inherent in applying new technologies to drug discovery, the successes and recognition that we cannot continue to rely on safety assessment practices used for decades have led to rather dramatic strategy shifts and fostered partnerships across government agencies and industry. We are optimistic that these efforts will ultimately benefit patients by delivering effective and safe medications in a timely fashion.
-
An assessment of the skid resistance effect on traffic safety under wet-pavement conditions.
Pardillo Mayora, José M; Jurado Piña, Rafael
2009-07-01
Pavement-tire friction provides the grip that is required for maintaining vehicle control and for stopping in emergency situations. Statistically significant negative correlations of skid resistance values and wet-pavement accident rates have been found in previous research. Skid resistance measured with SCRIM and crash data from over 1750km of two-lane rural roads in the Spanish National Road System were analyzed to determine the influence of pavement conditions on safety and to assess the effects of improving pavement friction on safety. Both wet- and dry-pavement crash rates presented a decreasing trend as skid resistance values increased. Thresholds in SCRIM coefficient values associated with significant decreases in wet-pavement crash rates were determined. Pavement friction improvement schemes were found to yield significant reductions in wet-pavement crash rates averaging 68%. The results confirm the importance of maintaining adequate levels of pavement friction to safeguard traffic safety as well as the potential of pavement friction improvement schemes to achieve significant crash reductions.
-
Prediction based active ramp metering control strategy with mobility and safety assessment
NASA Astrophysics Data System (ADS)
Fang, Jie; Tu, Lili
2018-04-01
Ramp metering is one of the most direct and efficient motorway traffic flow management measures so as to improve traffic conditions. However, owing to short of traffic conditions prediction, in earlier studies, the impact on traffic flow dynamics of the applied RM control was not quantitatively evaluated. In this study, a RM control algorithm adopting Model Predictive Control (MPC) framework to predict and assess future traffic conditions, which taking both the current traffic conditions and the RM-controlled future traffic states into consideration, was presented. The designed RM control algorithm targets at optimizing the network mobility and safety performance. The designed algorithm is evaluated in a field-data-based simulation. Through comparing the presented algorithm controlled scenario with the uncontrolled scenario, it was proved that the proposed RM control algorithm can effectively relieve the congestion of traffic network with no significant compromises in safety aspect.
-
Assessment of patient safety culture in clinical laboratories in the Spanish National Health System
Giménez-Marín, Angeles; Rivas-Ruiz, Francisco; García-Raja, Ana M.; Venta-Obaya, Rafael; Fusté-Ventosa, Margarita; Caballé-Martín, Inmaculada; Benítez-Estevez, Alfonso; Quinteiro-García, Ana I.; Bedini, José Luis; León-Justel, Antonio; Torra-Puig, Montserrat
2015-01-01
Introduction There is increasing awareness of the importance of transforming organisational culture in order to raise safety standards. This paper describes the results obtained from an evaluation of patient safety culture in a sample of clinical laboratories in public hospitals in the Spanish National Health System. Material and methods A descriptive cross-sectional study was conducted among health workers employed in the clinical laboratories of 27 public hospitals in 2012. The participants were recruited by the heads of service at each of the participating centers. Stratified analyses were performed to assess the mean score, standardized to a base of 100, of the six survey factors, together with the overall patient safety score. Results 740 completed questionnaires were received (88% of the 840 issued). The highest standardized scores were obtained in Area 1 (individual, social and cultural) with a mean value of 77 (95%CI: 76-78), and the lowest ones, in Area 3 (equipment and resources), with a mean value of 58 (95%CI: 57-59). In all areas, a greater perception of patient safety was reported by the heads of service than by other staff. Conclusions We present the first multicentre study to evaluate the culture of clinical safety in public hospital laboratories in Spain. The results obtained evidence a culture in which high regard is paid to safety, probably due to the pattern of continuous quality improvement. Nevertheless, much remains to be done, as reflected by the weaknesses detected, which identify areas and strategies for improvement. PMID:26525595
-
Nel, Andre E.; Nasser, Elina; Godwin, Hilary; Avery, David; Bahadori, Tina; Bergeson, Lynn; Beryt, Elizabeth; Bonner, James C.; Boverhof, Darrell; Carter, Janet; Castranova, Vince; DeShazo, J. R.; Hussain, Saber M.; Kane, Agnes B.; Klaessig, Fred; Kuempel, Eileen; Lafranconi, Mark; Landsiedel, Robert; Malloy, Timothy; Miller, Mary Beth; Morris, Jeffery; Moss, Kenneth; Oberdorster, Gunter; Pinkerton, Kent; Pleus, Richard C.; Shatkin, Jo Anne; Thomas, Rusty; Tolaymat, Thabet; Wang, Amy; Wong, Jeffrey
2014-01-01
There has been a conceptual shift in toxicological studies from describing what happens to explaining how the adverse outcome occurs, thereby enabling a deeper and improved understanding of how biomolecular and mechanistic profiling can inform hazard identification and improve risk assessment. Compared to traditional toxicology methods, which have a heavy reliance on animals, new approaches to generate toxicological data are becoming available for the safety assessment of chemicals, including high-throughput and high-content screening (HTS, HCS). With the emergence of nanotechnology, the exponential increase in the total number of engineered nanomaterials (ENMs) in research, development, and commercialization requires a robust scientific approach to screen ENM safety in humans and the environment rapidly and efficiently. Spurred by the developments in chemical testing, a promising new toxicological paradigm for ENMs is to use alternative test strategies (ATS), which reduce reliance on animal testing through the use of in vitro and in silico methods such as HTS, HCS, and computational modeling. Furthermore, this allows for the comparative analysis of large numbers of ENMs simultaneously and for hazard assessment at various stages of the product development process and overall life cycle. Using carbon nanotubes as a case study, a workshop bringing together national and international leaders from government, industry, and academia was convened at the University of California, Los Angeles to discuss the utility of ATS for decision-making analyses of ENMs. After lively discussions, a short list of generally shared viewpoints on this topic was generated, including a general view that ATS approaches for ENMs can significantly benefit chemical safety analysis. PMID:23924032
-
Food Safety Assessment and Programming.
ERIC Educational Resources Information Center
Gilmore, Gary D.; And Others
1994-01-01
A 1990 Wisconsin extension survey (n=1,549) was followed up in 1993 (n=1,135). In 1993, the top three concerns about food safety were food-borne illnesses, government role, and pesticides/chemicals; in 1990, they were pesticides, drugs in food, and manufacturing standards. In both surveys, preferred information sources were radio, television, and…
-
Insights on in vitro models for safety and toxicity assessment of cosmetic ingredients.
Almeida, Andreia; Sarmento, Bruno; Rodrigues, Francisca
2017-03-15
According to the current European legislation, the safety assessment of each individual cosmetic ingredient of any formulation is the basis for the safety evaluation of a cosmetic product. Also, animal testing in the European Union is prohibited for cosmetic ingredients and products since 2004 and 2009, respectively. Additionally, the commercialization of any cosmetic products containing ingredients tested on animal models was forbidden in 2009. In consequence of these boundaries, the European Centre for the Validation of Alternative Methods (ECVAM) proposes a list of validated cell-based in vitro models for predicting the safety and toxicity of cosmetic ingredients. These models have been demonstrated as valuable and effective tools to overcome the limitations of animal in vivo studies. Although the use of in vitro cell-based models for the evaluation of absorption and permeability of cosmetic ingredients is widespread, a detailed study on the properties of these platforms and the in vitro-in vivo correlation compared with human data are required. Moreover, additional efforts must be taken to develop in vitro models to predict carcinogenicity, repeat dose toxicity and reproductive toxicity, for which no alternative in vitro methods are currently available. This review paper summarizes and characterizes the most relevant in vitro models validated by ECVAM employed to predict the safety and toxicology of cosmetic ingredients. Copyright © 2017 Elsevier B.V. All rights reserved.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, Nicholas R.; Pointer, William David; Sieger, Matt
2016-04-01
The goal of this review is to enable application of codes or software packages for safety assessment of advanced sodium-cooled fast reactor (SFR) designs. To address near-term programmatic needs, the authors have focused on two objectives. First, the authors have focused on identification of requirements for software QA that must be satisfied to enable the application of software to future safety analyses. Second, the authors have collected best practices applied by other code development teams to minimize cost and time of initial code qualification activities and to recommend a path to the stated goal.
-
Woodhouse, Kristina D; Volz, Edna; Bellerive, Marc; Bergendahl, Howard W; Gabriel, Peter E; Maity, Amit; Hahn, Stephen M; Vapiwala, Neha
2016-01-01
In 2010, the American Society for Radiation Oncology launched a national campaign to improve patient safety in radiation therapy. One recommendation included the expansion of educational programs dedicated to quality and safety. We subsequently implemented a quality and safety culture education program (Q-SCEP) in our large radiation oncology department. The purpose of this study is to describe the design, implementation, and impact of this Q-SCEP. In 2010, we instituted a comprehensive Q-SCEP, consisting of a longitudinal series of lectures, meetings, and interactive workshops. Participation was mandatory for all department members across all network locations. Electronic surveys were administered to assess employee engagement, knowledge retention, preferred learning styles, and the program's overall impact. The Agency for Healthcare Research and Quality (AHRQ) Survey on Patient Safety Culture was administered. Analysis of variance was used for statistical analysis. Between 2010 and 2015, 100% of targeted staff participated in Q-SCEP. Thirty-three percent (132 of 400) and 30% (136 of 450) responded to surveys in 2012 and 2014, respectively. Mean scores improved from 73% to 89% (P < .001), with the largest improvement seen among therapists (+21.7%). The majority strongly agreed that safety culture education was critical to performing their jobs well. Full course compliance was achieved despite the sizable number of personnel and treatment centers. Periodic assessments demonstrated high knowledge retention, which significantly improved over time in nearly all department divisions. Additionally, our AHRQ patient safety grade remains high and continues to improve. These results will be used to further enhance ongoing internal safety initiatives and to inform future innovative efforts. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.
-
DOT National Transportation Integrated Search
2016-12-01
The Center for Health and Safety Culture at Montana State University developed a survey to investigate the traffic safety culture related to engagement in traffic safety citizenship behaviors. The development of the survey was based on an augmented f...
-
NASA Technical Reports Server (NTRS)
Guarro, Sergio B.
2010-01-01
This report validates and documents the detailed features and practical application of the framework for software intensive digital systems risk assessment and risk-informed safety assurance presented in the NASA PRA Procedures Guide for Managers and Practitioner. This framework, called herein the "Context-based Software Risk Model" (CSRM), enables the assessment of the contribution of software and software-intensive digital systems to overall system risk, in a manner which is entirely compatible and integrated with the format of a "standard" Probabilistic Risk Assessment (PRA), as currently documented and applied for NASA missions and applications. The CSRM also provides a risk-informed path and criteria for conducting organized and systematic digital system and software testing so that, within this risk-informed paradigm, the achievement of a quantitatively defined level of safety and mission success assurance may be targeted and demonstrated. The framework is based on the concept of context-dependent software risk scenarios and on the modeling of such scenarios via the use of traditional PRA techniques - i.e., event trees and fault trees - in combination with more advanced modeling devices such as the Dynamic Flowgraph Methodology (DFM) or other dynamic logic-modeling representations. The scenarios can be synthesized and quantified in a conditional logic and probabilistic formulation. The application of the CSRM method documented in this report refers to the MiniAERCam system designed and developed by the NASA Johnson Space Center.
-
Occupational Health and Safety in Ethiopia: A review of Situational Analysis and Needs Assessment
Kumie, Abera; Amera, Tadesse; Berhane, Kiros; Samet, Jonathan; Hundal, Nuvjote; G/Michael, Fitsum; Gilliland, Frank
2017-01-01
Background The current rapid economic development has brought changes in workplaces in developing countries, including Ethiopia. The organization of occupational health and safety services is not yet resilient enough to handle the growing demands for workers’ health in the context of industrialization. There is limited information on the gaps and needs of occupational health services in workplaces in Ethiopia. Objectives The present review article describes the existing profile of occupational safety and health services in Ethiopia and identifies the current gaps and needs in the services. Methods Secondary data sources were reviewed using a structured checklist to explore the status of occupational safety, health services and related morbidity. Local literature was consulted in order to describe the type and prevalence of work related hazards, patterns of industries and of workforce. Published articles were searched in Google, Google scholar, PUBMED, and HINARI databases. Relevant heads of stakeholder organizations and experts were interviewed to verify the gaps that were synthesized using desk review. Results Ethiopia is an agrarian country that is industrializing rapidly with a focus on construction, manufacturing, mining, and road infrastructure. An estimated work force of about two million is currently engaged in the public and private sectors. Males constitute the majority of this workforce. Most of the workforce has basic primary education. Commonly observed hazards in the workplace include occupational noise and dust of various types in manufacturing sectors and chemical exposures in the flower industry. Injury in both the agriculture and the manufacturing sectors is another workplace hazard commonly observed in the country. A lack of information made assessing workplace exposures in detail difficult. The prevalence of noise exposure was found to be high with the potential to seriously impact hearing capacity. Exposure to dust in textile and cement
-
Occupational Health and Safety in Ethiopia: A review of Situational Analysis and Needs Assessment.
Kumie, Abera; Amera, Tadesse; Berhane, Kiros; Samet, Jonathan; Hundal, Nuvjote; G/Michael, Fitsum; Gilliland, Frank
2016-01-01
The current rapid economic development has brought changes in workplaces in developing countries, including Ethiopia. The organization of occupational health and safety services is not yet resilient enough to handle the growing demands for workers' health in the context of industrialization. There is limited information on the gaps and needs of occupational health services in workplaces in Ethiopia. The present review article describes the existing profile of occupational safety and health services in Ethiopia and identifies the current gaps and needs in the services. Secondary data sources were reviewed using a structured checklist to explore the status of occupational safety, health services and related morbidity. Local literature was consulted in order to describe the type and prevalence of work related hazards, patterns of industries and of workforce. Published articles were searched in Google, Google scholar, PUBMED, and HINARI databases. Relevant heads of stakeholder organizations and experts were interviewed to verify the gaps that were synthesized using desk review. Ethiopia is an agrarian country that is industrializing rapidly with a focus on construction, manufacturing, mining, and road infrastructure. An estimated work force of about two million is currently engaged in the public and private sectors. Males constitute the majority of this workforce. Most of the workforce has basic primary education. Commonly observed hazards in the workplace include occupational noise and dust of various types in manufacturing sectors and chemical exposures in the flower industry. Injury in both the agriculture and the manufacturing sectors is another workplace hazard commonly observed in the country. A lack of information made assessing workplace exposures in detail difficult. The prevalence of noise exposure was found to be high with the potential to seriously impact hearing capacity. Exposure to dust in textile and cement factories greatly exceeded international
-
Groves, Patricia S; Bunch, Jacinda L
2018-05-18
The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.
-
Assessing the relationship between patient safety culture and EHR strategy.
Ford, Eric W; Silvera, Geoffrey A; Kazley, Abby S; Diana, Mark L; Huerta, Timothy R
2016-07-11
Purpose - The purpose of this paper is to explore the relationship between hospitals' electronic health record (EHR) adoption characteristics and their patient safety cultures. The "Meaningful Use" (MU) program is designed to increase hospitals' adoption of EHR, which will lead to better care quality, reduce medical errors, avoid unnecessary cost, and promote a patient safety culture. To reduce medical errors, hospital leaders have been encouraged to promote safety cultures common to high-reliability organizations. Expecting a positive relationship between EHR adoption and improved patient safety cultures appears sound in theory, but it has yet to be empirically demonstrated. Design/methodology/approach - Providers' perceptions of patient safety culture and counts of patient safety incidents are explored in relationship to hospital EHR adoption patterns. Multi-level modeling is employed to data drawn from the Agency for Healthcare Research and Quality's surveys on patient safety culture (level 1) and the American Hospital Association's survey and healthcare information technology supplement (level 2). Findings - The findings suggest that the early adoption of EHR capabilities hold a negative association to the number of patient safety events reported. However, this relationship was not present in providers' perceptions of overall patient safety cultures. These mixed results suggest that the understanding of the EHR-patient safety culture relationship needs further research. Originality/value - Relating EHR MU and providers' care quality attitudes is an important leading indicator for improved patient safety cultures. For healthcare facility managers and providers, the ability to effectively quantify the impact of new technologies on efforts to change organizational cultures is important for pinpointing clinical areas for process improvements.
-
From the traditional concept of safety management to safety integrated with quality.
García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O
2002-01-01
This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.
-
Recommendations for assessing water quality and safety on board merchant ships.
Grappasonni, Iolanda; Cocchioni, Mario; Degli Angioli, Rolando; Saturnino, Andrea; Sibilio, Fabio; Scuri, Stefania; Amenta, Francesco
2013-01-01
Health and diseases on board ships may depend on water. Interventions to improve the quality of water may bring to significant benefits to health and water stores/supply and should be controlledto protect health. This paper has reviewed the main regulations for the control of water safety and qualityon board ships and presents some practical recommendations for keeping water healthy and safe in passenger and cargo merchant ships. The main international regulations and guidelines on the topic were analysed. Guidelines forWater Quality on Board Merchant Ships Including Passenger Vessels of Health Protection Agency, World Health Organisation (WHO) Guide to Ship Sanitation, WHO Guidelines for Drinking Water Quality, WHO Water Safety Plan and the United States Center for Disease Control and Prevention Vessel Sanitation Program were examined. Recommendations for passenger and, if available, for cargo ships were collected and compared. Recommended questionnaire: A questionnaire summarising the main information to collect for assessingthe enough quality of water for the purposes it should be used on board is proposed. The need of havinga crew member with water assessment duties on board, trained for performing these activities properlyis discussed. Water quality on board ships should be monitored routinely. Monitoring should be directedto chemical and microbiological parameters for identifying possible contamination sources, using specifickits by a designed crew member. More detailed periodic assessments should be under the responsibility ofspecialised personnel/laboratories and should be based on sample collection from all tanks and sites of waterdistribution. It is important to select a properly trained crew member on board for monitoring water quality.
-
Mort, Elizabeth; Bruckel, Jeffrey; Donelan, Karen; Paine, Lori; Rosen, Michael; Thompson, David; Weaver, Sallie; Yagoda, Daniel; Pronovost, Peter
Despite decades of investment in patient safety, unintentional patient harm remains a major challenge in the health care industry. Peer-to-peer assessment in the nuclear industry has been shown to reduce harm. The study team's goal was to pilot and assess the feasibility of this approach in health care. The team developed tools and piloted a peer-to-peer assessment at 2 academic hospitals: Massachusetts General Hospital and Johns Hopkins Hospital. The assessment evaluated both the institutions' organizational approach to quality and safety as well as their approach to reducing 2 specific areas of patient harm. Site visits were completed and consisted of semistructured interviews with institutional leaders and clinical staff as well as direct patient observations using audit tools. Reports with recommendations were well received and each institution has developed improvement plans. The study team believes that peer-to-peer assessment in health care has promise and warrants consideration for wider adoption.
-
Principles of Safety Pharmacology
Pugsley, M K; Authier, S; Curtis, M J
2008-01-01
Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goineau, Sonia; Rompion, Sonia; Guillaume, Philippe
2010-09-15
Although the whole body plethysmography for unrestrained animals is the most widely used method to assess the respiratory risk of new drugs in safety pharmacology, non-appropriate experimental conditions may mask deleterious side effects of some substances. If stimulant or bronchodilatory effects can be easily evidenced in rodents under standard experimental conditions, i.e. normal air breathing and diurnal phase, drug-induced respiratory depression remains more difficult to detect. This study was aimed at comparing the responsiveness of Wistar rats, Duncan Hartley guinea-pigs or BALB/c mice to the respiratory properties of theophylline (50 or 100 mg/kg p.o.) or morphine (30 mg/kg i.p.) undermore » varying conditions (100% air versus 5% CO{sub 2}-enriched air, light versus dark day phase), in order to select the most appropriate experimental conditions to each species for safety airway investigations. Our results showed that under normocapnia the ventilatory depressant effects of morphine can be easily evidenced in mice, slightly observed in guinea-pigs and not detected in rats in any day phase. Slight hypercapnic conditions enhanced the responsiveness of rats to morphine but not that of guinea-pigs and importantly they did not blunt the airway responsiveness of rats to the stimulation and bronchodilation evoked by theophylline, the most widely used reference agent in safety pharmacology studies. In conclusion, hypercapnic conditions associated with the non-invasive whole body plethysmography should be considered for optimizing the assessment of both the ventilatory depressant potential of morphine-like substances or the respiratory stimulant effects of new drugs in the rat, the most extensively used species in rodent safety and toxicological investigations.« less
-
Cornell, Dewey; Maeng, Jennifer L; Burnette, Anna Grace; Jia, Yuane; Huang, Francis; Konold, Timothy; Datta, Pooja; Malone, Marisa; Meyer, Patrick
2018-06-01
Threat assessment has been widely endorsed as a school safety practice, but there is little research on its implementation. In 2013, Virginia became the first state to mandate student threat assessment in its public schools. The purpose of this study was to examine the statewide implementation of threat assessment and to identify how threat assessment teams distinguish serious from nonserious threats. The sample consisted of 1,865 threat assessment cases reported by 785 elementary, middle, and high schools. Students ranged from pre-K to Grade 12, including 74.4% male, 34.6% receiving special education services, 51.2% White, 30.2% Black, 6.8% Hispanic, and 2.7% Asian. Survey data were collected from school-based teams to measure student demographics, threat characteristics, and assessment results. Logistic regression indicated that threat assessment teams were more likely to identify a threat as serious if it was made by a student above the elementary grades (odds ratio 0.57; 95% lower and upper bound 0.42-0.78), a student receiving special education services (1.27; 1.00-1.60), involved battery (1.61; 1.20-2.15), homicide (1.40; 1.07-1.82), or weapon possession (4.41; 2.80-6.96), or targeted an administrator (3.55; 1.73-7.30). Student race and gender were not significantly associated with a serious threat determination. The odds ratio that a student would attempt to carry out a threat classified as serious was 12.48 (5.15-30.22). These results provide new information on the nature and prevalence of threats in schools using threat assessment that can guide further work to develop this emerging school safety practice. (PsycINFO Database Record (c) 2018 APA, all rights reserved).
-
Verstockt, Bram; Deleenheer, Barbara; Van Assche, Gert; Vermeire, Séverine; Ferrante, Marc
2017-07-01
Many different compounds targeting the interleukin 23/17 axis have been developed and successfully studied in several autoimmune diseases, including inflammatory bowel diseases. Nevertheless, interfering with key immunological pathways raises potential safety concerns. This review focuses on the safety profile of these novel biological therapies. Areas covered: A literature search until March 2017 was performed to collect safety data on different compounds targeting this pathway, with emphasis on ustekinumab and secukinumab. Firstly, the authors discuss briefly how genetics can inform about potential safety issues. Secondly, they extensively describe safety issues (common adverse events, infections, malignancies…), immunogenicity, exposure to ustekinumab in specific populations and provide advice for vaccination. Finally, they address safety profiles of secukinumab and other biological targeting the IL-23/17 axis in IBD. Expert opinion: Current evidence suggests that ustekinumab therapy overweigh the potential drug-related risks. Additional safety data beyond randomized-controlled trials, derived from statistically powered, large prospective studies with long-term follow-up are urgently needed to assess the real-life ustekinumab-related risks and to establish the correct position of these novel class of biologicals in IBD treatment. Combining immunomodulators with ustekinumab seems to be safe, though prospective data specifically addressing this topic are currently missing. Similarly, the combination of different biological therapies still has to be studied.
-
Ren, J; Jenkinson, I; Wang, J; Xu, D L; Yang, J B
2008-01-01
Focusing on people and organizations, this paper aims to contribute to offshore safety assessment by proposing a methodology to model causal relationships. The methodology is proposed in a general sense that it will be capable of accommodating modeling of multiple risk factors considered in offshore operations and will have the ability to deal with different types of data that may come from different resources. Reason's "Swiss cheese" model is used to form a generic offshore safety assessment framework, and Bayesian Network (BN) is tailored to fit into the framework to construct a causal relationship model. The proposed framework uses a five-level-structure model to address latent failures within the causal sequence of events. The five levels include Root causes level, Trigger events level, Incidents level, Accidents level, and Consequences level. To analyze and model a specified offshore installation safety, a BN model was established following the guideline of the proposed five-level framework. A range of events was specified, and the related prior and conditional probabilities regarding the BN model were assigned based on the inherent characteristics of each event. This paper shows that Reason's "Swiss cheese" model and BN can be jointly used in offshore safety assessment. On the one hand, the five-level conceptual model is enhanced by BNs that are capable of providing graphical demonstration of inter-relationships as well as calculating numerical values of occurrence likelihood for each failure event. Bayesian inference mechanism also makes it possible to monitor how a safety situation changes when information flow travel forwards and backwards within the networks. On the other hand, BN modeling relies heavily on experts' personal experiences and is therefore highly domain specific. "Swiss cheese" model is such a theoretic framework that it is based on solid behavioral theory and therefore can be used to provide industry with a roadmap for BN modeling and
-
Systematic assessment of laser safety in otolaryngology
NASA Astrophysics Data System (ADS)
Oswal, V. H.
2001-01-01
Risk management of lasers can be broadly define das a process of identification of the risk, assessment of the risk and steps taken to avert the risk. The risk management may be divided into: Risk inherent to the technology and risk in clinical use. Within the National Health Service in the UK, a useful document, which provides hospital laser users with advice on safety, is the 'Guidance on the Safe Use of Lasers in Medical and Dental Practice' issued by the Medical Devices Agency for the Department of Health in the UK. It recommends the appointment of a Laser Protection Adviser (LPA) who is knowledgeable in the evaluation of laser hazards. One of the duties LPA is to ensure that Local Rules are drawn up for each specific application of a laser. A Laser Protection Supervisor (LPS) should also be appointed with responsibility to ensure that the Local Rules are observed. It is a sensible precaution that laser users should be those approved by the Laser Protection Supervisor in consultation with the Laser Protection Advisor. All laser users should sign a statement that they have read and understood the Local Rules.
-
Farnan, Jeanne M; Gaffney, Sean; Poston, Jason T; Slawinski, Kris; Cappaert, Melissa; Kamin, Barry; Arora, Vineet M
2016-03-01
Patient safety curricula in undergraduate medical education (UME) are often didactic format with little focus on skills training. Despite recent focus on safety, practical training in residency education is also lacking. Assessments of safety skills in UME and graduate medical education (GME) are generally knowledge, and not application-focused. We aimed to develop and pilot a safety-focused simulation with medical students and interns to assess knowledge regarding hazards of hospitalisation. A simulation demonstrating common hospital-based safety threats was designed. A case scenario was created including salient patient information and simulated safety threats such as the use of upper-extremity restraints and medication errors. After entering the room and reviewing the mock chart, learners were timed and asked to identify and document as many safety hazards as possible. Learner satisfaction was assessed using constructed-response evaluation. Descriptive statistics, including per cent correct and mean correct hazards, were performed. All 86 third-year medical students completed the encounter. Some hazards were identified by a majority of students (fall risk, 83% of students) while others were rarely identified (absence of deep venous thrombosis prophylaxis, 13% of students). Only 5% of students correctly identified pressure ulcer risk. 128 of 131 interns representing 49 medical schools participated in the GME implementation. Incoming interns were able to identify a mean of 5.1 hazards out of the 9 displayed (SD 1.4) with 40% identifying restraints as a hazard, and 20% identifying the inappropriate urinary catheter as a hazard. A simulation showcasing safety hazards was a feasible and effective way to introduce trainees to safety-focused content. Both students and interns had difficulty identifying common hazards of hospitalisation. Despite poor performance, learners appreciated the interactive experience and its clinical utility. Published by the BMJ Publishing
-
Hansen, Matthew; Meckler, Garth; Dickinson, Caitlyn; Dickenson, Kathryn; Jui, Jonathan; Lambert, William; Guise, Jeanne-Marie
2015-01-01
Emergency medical services (EMS) providers may have critical knowledge gaps in pediatric care due to lack of exposure and training. There is currently little evidence to guide educators to the knowledge gaps that most need to be addressed to improve patient safety. The objective of this study was to identify educational needs of EMS providers related to pediatric care in various domains in order to inform development of curricula. The Children's Safety Initiative-EMS performed a three-phase Delphi survey on patient safety in pediatric emergencies among providers and content experts in pediatric emergency care, including physicians, nurses, and prehospital providers of all levels. Each round included questions related to educational needs of providers or the effect of training on patient safety events. We identified knowledge gaps in the following domains: case exposure, competency and knowledge, assessment and decision making, and critical thinking and proficiency. Individual knowledge gaps were ranked by portion of respondents who ranked them "highly likely" (Likert-type score 7-10 out of 10) to contribute to safety events. There were 737 respondents who were included in analysis of the first phase of the survey. Paramedics were 50.8% of respondents, EMT-basics/first responders were 22%, and physicians 11.4%. The top educational priorities identified in the final round of the survey include pediatric airway management, responder anxiety when working with children, and general pediatric skills among providers. The top three needs in decision-making include knowing when to alter plans mid-course, knowing when to perform an advanced airway, and assessing pain in children. The top 3 technical or procedural skills needs were pediatric advanced airway, neonatal resuscitation, and intravenous/intraosseous access. For neonates, specific educational needs identified included knowing appropriate vital signs and preventing hypothermia. This is the first large-scale Delphi
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolton, P.
The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.
-
Glenn, Kevin C
2008-01-01
During the last two decades, the public and private sectors have made substantial research progress internationally toward improving the nutritional value of a wide range of food and feed crops. Nevertheless, significant numbers of people still suffer from the effects of undernutrition. As newly developed crops with nutritionally improved traits come closer to being available to producers and consumers, scientifically sound and efficient processes are needed to assess the safety and nutritional quality of these crops. In 2004, a Task Force of international scientific experts, convened by the International Food Biotechnology Committee (IFBiC) of ILSI, published recommendations for the safety and nutritional assessment of foods and feeds nutritionally improved through modern biotechnology (J. Food Science, 2004, 69:CRH62-CRH68). The comparative safety assessment process is a basic principle in this publication and is the starting point, not the conclusion, of the analysis. Significant differences in composition are expected to be observed in the case of nutritionally enhanced crops and must be assessed on a case-by-case basis. The Golden Rice 2 case study will be presented as an example of a food crop nutritionally enhanced through the application of modern biotechnology (i.e., recombinant DNA techniques) to illustrate how the 2004 recommendations provide a robust paradigm for the safety assessment of "real world" examples of improved nutrition crops.
-
Considering new methodologies in strategies for safety assessment of foods and food ingredients.
Blaauboer, Bas J; Boobis, Alan R; Bradford, Bobbie; Cockburn, Andrew; Constable, Anne; Daneshian, Mardas; Edwards, Gareth; Garthoff, Jossie A; Jeffery, Brett; Krul, Cyrille; Schuermans, Jeroen
2016-05-01
Toxicology and safety assessment are changing and require new strategies for evaluating risk that are less depending on apical toxicity endpoints in animal models and relying more on knowledge of the mechanism of toxicity. This manuscript describes a number of developments that could contribute to this change and implement this in a stepwise roadmap that can be applied for the evaluation of food and food ingredients. The roadmap was evaluated in four case studies by using literature and existing data. This preliminary evaluation was shown to be useful. However, this experience should be extended by including examples where experimental work needs to be included. To further implement these new insights in toxicology and safety assessment for the area of food and food ingredients, the recommendation is that stakeholders take action in addressing gaps in our knowledge, e.g. with regard to the applicability of the roadmap for mixtures and food matrices. Further development of the threshold of toxicological concern is needed, as well as cooperation with other sectors where similar schemes are under development. Moreover, a more comprehensive evaluation of the roadmap, also including the identification of the need for in vitro experimental work is recommended. Copyright © 2016 ILSI Europe. Published by Elsevier Ltd.. All rights reserved.
-
Assessment of Occupational Health and Safety for a Gas Meter Manufacturing Plant
NASA Astrophysics Data System (ADS)
Korkmaz, Ece; Iskender, Gulen; Germirli Babuna, Fatos
2016-10-01
This study investigates the occupational health and safety for a gas meter manufacturing plant. The risk assessment and management study is applied to plastic injection and mounting departments of the factory through quantitative Fine Kinney method and the effect of adopting 5S workplace organization procedure on risk assessment is examined. The risk assessment reveals that there are 17 risks involved; 14 grouped in high risk class (immediate improvement as required action); 2 in significant (measures to be taken as required action) and one in possible risk class (monitoring as required action). Among 14 high risks, 4 can be reduced by 83 % to be grouped under possible class when 5S is applied. One significant risk is observed to be lowered by 78 % and considered as possible risk due to the application of 5S. As a result of either 67 or 50 % reductions in 7 high risks, these risks are converted to be members of significant risk group after 5S implications.
-
Assessment of statewide intersection safety performance.
DOT National Transportation Integrated Search
2011-06-01
This report summarizes the results of an analysis of the safety performance of Oregons intersections. Following a pilot : study, a database of 500 intersections randomly sampled from around the state of Oregon in both urban and rural : environment...
-
NASA Astrophysics Data System (ADS)
Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.
2018-03-01
A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.
-
Safety assessment in macaques of light exposures for functional two-photon ophthalmoscopy in humans
Schwarz, Christina; Sharma, Robin; Fischer, William S.; Chung, Mina; Palczewska, Grazyna; Palczewski, Krzysztof; Williams, David R.; Hunter, Jennifer J.
2016-01-01
Two-photon ophthalmoscopy has potential for in vivo assessment of function of normal and diseased retina. However, light safety of the sub-100 fs laser typically used is a major concern and safety standards are not well established. To test the feasibility of safe in vivo two-photon excitation fluorescence (TPEF) imaging of photoreceptors in humans, we examined the effects of ultrashort pulsed light and the required light levels with a variety of clinical and high resolution imaging methods in macaques. The only measure that revealed a significant effect due to exposure to pulsed light within existing safety standards was infrared autofluorescence (IRAF) intensity. No other structural or functional alterations were detected by other imaging techniques for any of the exposures. Photoreceptors and retinal pigment epithelium appeared normal in adaptive optics images. No effect of repeated exposures on TPEF time course was detected, suggesting that visual cycle function was maintained. If IRAF reduction is hazardous, it is the only hurdle to applying two-photon retinal imaging in humans. To date, no harmful effects of IRAF reduction have been detected. PMID:28018732
-
Final report on the safety assessment of amino nitrophenols as used in hair dyes.
Burnett, Christina L; Bergfeld, Wilma F; Belsito, Donald V; Klaassen, Curtis D; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Alan Andersen, F
2009-01-01
2-Amino-3-nitrophenol, 2-amino-4-nitrophenol, 2-amino-5-nitrophenol, 4-amino-3-nitrophenol, 4-amino-2-nitrophenol, 2-amino-4-nitrophenol sulfate, 3-nitro-p-hydroxyethylaminophenol, and 4-hydroxypropylamino-3-nitrophenol are substituted aromatic compounds used as semipermanent (nonoxidative) hair colorants and as toners in permanent (oxidative) hair dye products. All ingredients in this group except 2-amino-4-nitrophenol sulfate, 2-amino-5-nitrophenol, and 4-amino-2-nitrophenol have reported uses in cosmetics at use concentrations from 2% to 9%. The available toxicity studies for these amino nitrophenol hair dyes did not suggest safety concerns except for the potential carcinogenicity and mutagenicity of 4-amino-2-nitrophenol. 2-Amino-3-nitrophenol, 2-amino-4-nitrophenol, 2-amino-4-nitrophenol sulfate, 2-amino-5-nitrophenol, 4-amino-3-nitrophenol, 3-nitro-p-hydroxyethylaminophenol, and 4-hydroxypropylamino-3-nitrophenol are safe as hair dye ingredients in the practices of use and concentration as described in this safety assessment, but the data are insufficient to make a safety determination for 4-amino-2-nitrophenol.
-
Niskanen, Toivo; Lehtelä, Jouni; Länsikallio, Riina
2014-01-01
Employers and workers need concrete guidance to plan and implement changes in the ergonomics of computer workstations. The Näppärä method is a screening tool for identifying problems requiring further assessment and corrective actions. The aim of this study was to assess the work of occupational safety and health (OSH) government inspectors who used Näppärä as part of their OSH enforcement inspections (430 assessments) related to computer work. The modifications in workstation ergonomics involved mainly adjustments to the screen, mouse, keyboard, forearm supports, and chair. One output of the assessment is an index indicating the percentage of compliance items. This method can be considered as exposure assessment and ergonomics intervention used as a benchmark for the level of ergonomics. Future research can examine whether the effectiveness of participatory ergonomics interventions should be investigated with Näppärä.
-
Yu, Q; Zhang, Y; Wang, X; Ma, W C; Chen, L M
2009-09-15
A case study on the safety distance assessment of a chemical industry park in Shanghai, China, is presented in this paper. Toxic releases were taken into consideration. A safety criterion based on frequency and consequence of major hazard accidents was set up for consequence analysis. The exposure limits for the accidents with the frequency of more than 10(-4), 10(-5)-10(-4) and 10(-6)-10(-5) per year were mortalities of 1% (or SLOT), 50% (SLOD) and 75% (twice of SLOD) respectively. Accidents with the frequency of less than 10(-6) per year were considered incredible and ignored in the consequence analysis. Taking the safety distance of all the hazard installations in a chemical plant into consideration, the results based on the new criterion were almost smaller than those based on LC50 or SLOD. The combination of the consequence and risk based results indicated that the hazard installations in two of the chemical plants may be dangerous to the protection targets and measurements had to be taken to reduce the risk. The case study showed that taking account of the frequency of occurrence in the consequence analysis would give more feasible safety distances for major hazard accidents and the results were more comparable to those calculated by risk assessment.
-
Safety climate and attitude as evaluation measures of organizational safety.
Isla Díaz, R; Díaz Cabrera, D
1997-09-01
The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.
-
Higgins, Agnes; Doyle, Louise; Morrissey, Jean; Downes, Carmel; Gill, Ailish; Bailey, Sive
2016-08-01
Despite the articulated need for policies and processes to guide risk assessment and safety planning, limited guidance exists on the processes or procedures to be used to develop such policies, and there is no body of research that examines the quality or content of the risk-management policies developed. The aim of the present study was to analyse the policies of risk and safety management used to guide mental health nursing practice in Ireland. A documentary analysis was performed on 123 documents received from 22 of the 23 directors of nursing contacted. Findings from the analysis revealed a wide variation in how risk, risk assessment, and risk management were defined. Emphasis within the risk documentation submitted was on risk related to self and others, with minimal attention paid to other types of risks. In addition, there was limited evidence of recovery-focused approaches to positive risk taking that involved service users and their families within the risk-related documentation. Many of the risk-assessment tools had not been validated, and lacked consistency or guidance in relation to how they were to be used or applied. The tick-box approach and absence of space for commentary within documentation have the potential to impact severely on the quality of information collected and documented, and subsequent clinical decision-making. Managers, and those tasked with ensuring safety and quality, need to ensure that policies and processes are, where possible, informed by best evidence and are in line with national mental health policy on recovery. © 2016 Australian College of Mental Health Nurses Inc.
-
U. K. pressing campaign to improve offshore safety
DOE Office of Scientific and Technical Information (OSTI.GOV)
Knott, D.
1994-02-14
The U.K. government is making progress in its campaign to improve the safety of personnel working offshore. The government's Health and Safety Executive (HSE) plans to assess and pass judgment on at lease one safety plan, called a safety case, from each U.K. North Sea operator as soon as possible. HSE has agreed with the industry on a list of 61 priority safety cases, known as exemplars. Feedback from exemplar assessment will help operators review safety management and assist in preparation or revision of future safety cases. It also will give HSE practice in assessing a range of case types.more » The requirement for a safety program is part of new U.K. offshore legislation designed to prevent another accident similar to the Piper Alpha platform fire and explosion of 1988. After the transition period it will be against the law to operate an oil and gas installation in British waters without an accepted safety case. Besides existing installations, safety cases are also required for new installations reaching design stage by May 31, 1993, the date safety case regulations went into force. The paper describes the Cullen report, companies' experiences with the new law, and the safety assessment progress so far.« less
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-01-01
Tiger Team Assessments and Technical Safety Appraisals (TSA) were reviewed and evaluated for concerns in the Maintenance Area (MA). Two hundred and thirty one (231) maintenance concerns were identified by the Tiger Team Assessments and TSA reports. These recurring concerns appear below. A summary of the Noteworthy Practices that were identified and a compilation of the maintenance concerns for each performance objective that were not considered as recurring are also included. Where the Tiger Team Assessment and TSA identified the operating contractor or facility by name, the concern has been modified to remove the name while retaining the intent ofmore » the comment.« less
-
Development and Assessment of a Medication Safety Measurement Program in a Long-Term Care Pharmacy.
Hertig, John B; Hultgren, Kyle E; Parks, Scott; Rondinelli, Rick
2016-02-01
Medication errors continue to be a major issue in the health care system, including in long-term care facilities. While many hospitals and health systems have developed methods to identify, track, and prevent these errors, long-term care facilities historically have not invested in these error-prevention strategies. The objective of this study was two-fold: 1) to develop a set of medication-safety process measures for dispensing in a long-term care pharmacy, and 2) to analyze the data from those measures to determine the relative safety of the process. The study was conducted at In Touch Pharmaceuticals in Valparaiso, Indiana. To assess the safety of the medication-use system, each step was documented using a comprehensive flowchart (process flow map) tool. Once completed and validated, the flowchart was used to complete a "failure modes and effects analysis" (FMEA) identifying ways a process may fail. Operational gaps found during FMEA were used to identify points of measurement. The research identified a set of eight measures as potential areas of failure; data were then collected on each one of these. More than 133,000 medication doses (opportunities for errors) were included in the study during the research time frame (April 1, 2014, and ended on June 4, 2014). Overall, there was an approximate order-entry error rate of 15.26%, with intravenous errors at 0.37%. A total of 21 errors migrated through the entire medication-use system. These 21 errors in 133,000 opportunities resulted in a final check error rate of 0.015%. A comprehensive medication-safety measurement program was designed and assessed. This study demonstrated the ability to detect medication errors in a long-term pharmacy setting, thereby making process improvements measureable. Future, larger, multi-site studies should be completed to test this measurement program.
-
A multi-sector international group of government, academic, and industry scientists has developed a proposal for an improved testing scheme for assessing the safety of crop protection chemicals. Incorporation of pharmacokinetic studies describing the absorption, distribution, me...
-
DOT National Transportation Integrated Search
2012-06-01
The focus of the research reported herein was on assessing the long-term effectiveness of median barriers at highway-rail : grade crossings (HRGCs), the impacts of barrier maintenance in resurrecting safety, and on exploring and assessing ways : to i...
-
Justification of system of assessment of ecological safety degree of housing construction objects
NASA Astrophysics Data System (ADS)
Kankhva, Vadim
2017-10-01
In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.
-
2011 Annual Criticality Safety Program Performance Summary
DOE Office of Scientific and Technical Information (OSTI.GOV)
Andrea Hoffman
The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits
-
Dermal safety assessment of Arm & Hammer laundry products formulated for sensitive skin.
Frederick, Douglas M; Vorwerk, Linda; Gupta, Archana; Ghassemi, Annahita
2017-09-01
The prevalence of sensitive skin among the general population in industrialized countries is reported to be over 50%. Sensitive skin subjects often report significant reactions to contact with cosmetics, soaps and other consumer products. This paper describes the overall skin compatibility and mildness program for a newly developed, lightly fragranced, colorant free laundry product (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent), specially formulated for individuals with sensitive skin. The skin mildness of the product was compared to Arm & Hammer™ Free & Clear liquid laundry detergent with no fragrance or colorant, and an established history of safe use by sensitive skin consumers. The test material was a liquid laundry product with a light scent formulated for sensitive skin consumers (Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent). The product was compared to commercially marketed products for sensitive skin with a history of skin safety in the marketplace, including: a very similar product formulation (Arm & Hammer™ Free & Clear with no fragrance), and several selected competitors' products. Studies were conducted among individuals with self-assessed sensitive skin (based on a questionnaire) using standard protocols for the Human Repeat Insult Patch Test (HRIPT), 10-Day Cumulative Irritation, the Wrist Band Wear test, and the Safety In-Use testing. Responses in all protocols were evaluated by visual scoring of potential dermatologic reactions, and recording any sensory effects at the time of the examination. In addition, sensory effects collected from panelists' daily diaries were also evaluated. The HRIPT confirmed that neither the fragrance alone, nor the product formulation with fragrance, induced contact sensitization in sensitive skin subjects. The 10-Day cumulative irritation study conducted using sensitive skin subjects showed highly favorable skin compatibility, and the test product was comparable to the control
-
Chen-Hussey, Vanessa; Behrens, Ron; Logan, James G
2014-06-03
N,N-diethyl-m-toluamide (DEET) has been registered for commercial use as an insect repellent for over five decades, and is used widely across the world. Concerns over the safety of DEET first emerged during the 1980s after reports of encephalopathy following DEET exposure, particularly in children. However, the role of DEET in either the illness or deaths was and remains purely speculative. In response to these cases a number of reviews and investigations of DEET safety were carried out. Here we examine the methods used and information available to determine the safety of DEET in humans. Animal testing, observational studies and intervention trials have found no evidence of severe adverse events associated with recommended DEET use. Minor adverse effects noted in animal trials were associated with very large doses and were not replicated between different test species. The safety surveillance from extensive humans use reveals no association with severe adverse events. This review compares the toxicity assessment using three different models to define the risk assessment and safety threshold for DEET use in humans and discusses the clinical consequences of the thresholds derived from the models.The theoretical risks associated with wearing an insect repellent should be weighed against the reduction or prevention of the risk of fatal or debilitating diseases including malaria, dengue, yellow fever and filariasis. With over 48 million European residents travelling to regions where vector borne diseases are a threat in 2009, restricting the concentration of DEET containing repellents to 15% or less, as modelled in the 2010 EU directive, is likely to result in extensive sub-therapeutic activity where repellents are infrequently applied. Future European travellers, as a consequence of inadequate personal protection, could potentially be at increased risk of vector borne diseases. Risk assessments of repellents should take these factors into account when setting safe
-
New safety rules challenge U. K. operators, regulators
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hudson, J.
1994-08-15
Offshore safety regulations based on lessons learned from the Piper Alpha blast of 1988 have been in operation in the U.K. for a year. The Offshore Installations (Safety Case) Regulations 1992 make operators of fixed and mobile installations (the duty holders'') responsible for producing a formal safety assessment, or safety case, for each installation. After the end of November 1995 it will be an offense to operate an installation without a safety case which has been approved by the government's Health and Safety Executive (HSE). Producing safety cases for installations is a major task for duty holder, while assessing themmore » is a huge under taking for HSE's Offshore Safety Division (OSD). This paper reviews how HSE has established management arrangements to handle safety cases, considers progress in assessment, highlights some of the important lessons learned, and look to the future.« less
-
Spee, Ton; Huizer, Daan
2017-10-01
On June 1st, 2007 the European regulation on Registration, Evaluation and Restriction of Chemical substances (REACH) came into force. Aim of the regulation is safe use of chemicals for humans and for the environment. The core element of REACH is chemical safety assessment of chemicals and communication of health and safety hazards and risk management measures throughout the supply chain. Extended Safety Data Sheets (Ext-SDS) are the primary carriers of health and safety information. The aim of our project was to find out whether the actual exposure to methyl methacrylate (MMA) during the application of polymethylmethacrylate (PMMA) in floor coatings as assessed in the chemical safety assessment, reflect the exposure situations as observed in the Dutch building practice. Use of PMMA flooring and typical exposure situations during application were discussed with twelve representatives of floor laying companies. Representative situations for exposure measurements were designated on the basis of this inventory. Exposure to MMA was measured in the breathing zone of the workers at four construction sites, 14 full shift samples and 14 task based samples were taken by personal air sampling. The task-based samples were compared with estimates from the Targeted Risk Assessment Tool (v3.1) of the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC-TRA) as supplied in the safety assessment from the manufacturer. For task-based measurements, in 12 out of 14 (86%) air samples measured exposure was higher than estimated exposure. Recalculation with a lower ventilation rate (50% instead of 80%) together with a higher temperature during mixing (40°C instead of 20°C) in comparison with the CSR, reduced the number of underestimated exposures to 10 (71%) samples. Estimation with the EMKG-EXPO-Tool resulted in unsafe exposure situations for all scenarios, which is in accordance with the measurement outcomes. In indoor situations, 5 out of 8 full shift exposures (62
-
Zhang, Xiaoli; Wang, Baojian; Chen, Xuefeng
2015-04-16
With the rapid development of sensor technology, various professional sensors are installed on modern machinery to monitor operational processes and assure operational safety, which play an important role in industry and society. In this work a new operational safety assessment approach with wavelet Rényi entropy utilizing sensor-dependent vibration signals is proposed. On the basis of a professional sensor and the corresponding system, sensor-dependent vibration signals are acquired and analyzed by a second generation wavelet package, which reflects time-varying operational characteristic of individual machinery. Derived from the sensor-dependent signals' wavelet energy distribution over the observed signal frequency range, wavelet Rényi entropy is defined to compute the operational uncertainty of a turbo generator, which is then associated with its operational safety degree. The proposed method is applied in a 50 MW turbo generator, whereupon it is proved to be reasonable and effective for operation and maintenance.
-
NASA Astrophysics Data System (ADS)
Pijanowski, B.; Łukjanow, S.; Burliński, R.
2016-09-01
The rapid development of telematics, particularly mobile telephony (GSM), wireless data transmission (GPRS) and satellite positioning (GPS) noticeable in the last decade, resulted in an almost unlimited growth of the possibilities for monitoring of mobile objects. These solutions are already widely used in the so-called “Intelligent Transport Systems” - ITS and affect a significant increase for road safety. The article describes a method of testing and evaluation of Car Safety Systems (Polish abbreviation - SSB) especially for monitoring traffic incidents, such as collisions and accidents. The algorithm of SSB testing process is also presented. Tests are performed on the dynamic test bench, part of which is movable platform with car security system mounted on it. Crash tests with a rigid obstacle are carried out instead of destructive attempts to crash test of the entire vehicle which is expensive. The tested system, depending on the simulated traffic conditions, is mounted in such a position and with the use of components, indicated by the manufacturer for the automotive safety system installation in a vehicle, for which it is intended. Then, the tests and assessments are carried out.
-
Safety assessment in pediatric studies.
Koren, Gideon; Elzagallaai, Abdelbasset; Etwel, Fatma
2011-01-01
It typically takes many years before an association of a drug with a rare, serious adverse reaction is established. As related to pediatric drug use, evidence is even more erratic, as most drugs are used off labels. To enhance child safety, there is an urgent need to develop robust and rapid methods to identify such associations in as timely a manner as possible. In this chapter, several novel methods, both clinically based pharmacoepidemiological approaches and laboratory-based methods, are described.
-
Hansen, Matthew; Meckler, Garth; Dickinson, Caitlyn; Dickenson, Kathryn; Jui, Jonathan; Lambert, William; Guise, Jeanne-Marie
2014-01-01
Objective Emergency Medical Services (EMS) providers may have critical knowledge gaps in pediatric care due to lack of exposure and training. There is currently little evidence to guide educators to the knowledge gaps most likely to improve patient safety. The objective of this study was to identify educational needs of EMS providers related to pediatric care in various domains in order to inform development of curricula. Methods The Children’s Safety Initiative-EMS performed a three-phase Delphi survey on patient safety in pediatric emergencies among providers and content experts in pediatric emergency care including physicians, nurses and pre-hospital providers of all levels. Each round included questions related to educational needs of providers or the effect of training on patient safety events. We identified knowledge gaps in the following domains: case exposure, competency and knowledge, assessment and decision making, and critical thinking and proficiency. Individual knowledge gaps were ranked by portion of respondents who ranked them “highly likely” (likert-type score 7–10 out of 10) to contribute to safety events. Results There were 737 respondents who were included in analysis of the first phase of the survey. Paramedics were 50.8% of respondents; EMT-Basics/first responders were 22% and physicians 11.4%. The top educational priorities identified in the final round of the survey include: pediatric airway management, responder anxiety when working with children, and general pediatric skills among providers. The top three needs in decision-making include knowing when to alter plans mid-course, knowing when to perform and advanced airway, and assessing pain in children. The top 3 technical or procedural skills needs were pediatric advanced airway, neonatal resuscitation, and intravenous/intraosseos access. For neonates, specific educational needs identified included knowing appropriate vital signs and preventing hypothermia. Conclusions This is the
-
Macfarlane, Martin; Jones, Penny; Goebel, Carsten; Dufour, Eric; Rowland, Joanna; Araki, Daisuke; Costabel-Farkas, Margit; Hewitt, Nicola J; Hibatallah, Jalila; Kirst, Annette; McNamee, Pauline; Schellauf, Florian; Scheel, Julia
2009-07-01
Evaluation of the skin irritancy and corrosivity potential of an ingredient is a necessity in the safety assessment of cosmetic ingredients. To date, there are two formally validated alternatives to the rabbit Draize test for skin corrosivity in place, namely the rat skin transcutaneous electrical resistance (TER) assay and the Human Skin Model Test using EpiSkin, EpiDerm and SkinEthic reconstructed human epidermal equivalents. For skin irritation, EpiSkin, EpiDerm and SkinEthic are validated as stand-alone test replacements for the rabbit Draize test. Data from these tests are rarely considered in isolation and are evaluated in combination with other factors to establish the overall irritating or corrosive potential of an ingredient. In light of the deadlines established in the Cosmetics Directive for cessation of animal testing for cosmetic ingredients, a COLIPA scientific meeting was held in Brussels on 30th January, 2008 to review the use of alternative approaches and to set up a decision tree approach for their integration into tiered testing strategies for hazard and safety assessment of cosmetic ingredients and their use in products. In conclusion, the safety assessments for skin irritation/corrosion of new chemicals for use in cosmetics can be confidently accomplished using exclusively alternative methods.
-
Crooke, Stanley T; Baker, Brenda F; Kwoh, T Jesse; Cheng, Wei; Schulz, Dan J; Xia, Shuting; Salgado, Nelson; Bui, Huynh-Hoa; Hart, Christopher E; Burel, Sebastien A; Younis, Husam S; Geary, Richard S; Henry, Scott P; Bhanot, Sanjay
2016-01-01
The common chemical and biological properties of antisense oligonucleotides provide the opportunity to identify and characterize chemical class effects across species. The chemical class that has proven to be the most versatile and best characterized is the 2′-O-methoxyethyl chimeric antisense oligonucleotides. In this report we present an integrated safety assessment of data obtained from controlled dose-ranging studies in nonhuman primates (macaques) and healthy human volunteers for 12 unique 2′-O-methoxyethyl chimeric antisense oligonucleotides. Safety was assessed by the incidence of safety signals in standardized laboratory tests for kidney and liver function, hematology, and complement activation; as well as by the mean test results as a function of dose level over time. At high doses a number of toxicities were observed in nonhuman primates. However, no class safety effects were identified in healthy human volunteers from this integrated data analysis. Effects on complement in nonhuman primates were not observed in humans. Nonhuman primates predicted safe doses in humans, but over predicted risk of complement activation and effects on platelets. Although limited to a single chemical class, comparisons from this analysis are considered valid and accurate based on the carefully controlled setting for the specified study populations and within the total exposures studied. PMID:27357629
-
Final report of the safety assessment of cosmetic ingredients derived from Zea mays (corn).
Andersen, F Alan; Bergfeld, Wilma F; Belsito, Donald V; Klaassen, Curtis D; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W
2011-05-01
Many cosmetic ingredients are derived from Zea mays (corn). While safety test data were not available for most ingredients, similarities in preparation and the resulting similar composition allowed extrapolation of safety data to all listed ingredients. Animal studies included acute toxicity, ocular and dermal irritation studies, and dermal sensitization studies. Clinical studies included dermal irritation and sensitization. Case reports were available for the starch as used as a donning agent in medical gloves. Studies of many other endpoints, including reproductive and developmental toxicity, use corn oil as a vehicle control with no reported adverse effects at levels used in cosmetics. While industry should continue limiting ingredient impurities such as pesticide residues before blending into a cosmetic formulation, the CIR Expert Panel determined that corn-derived ingredients are safe for use in cosmetics in the practices of use and concentration described in the assessment.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-03
... holders, and other stakeholders on a draft guidance document entitled ``Weapons Safety Assessment'' (WSA... weapons under the NRC's proposed rule titled ``Enhanced Weapons, Firearms Background Checks, and Security.... You should not include any site-specific security information in your comments. Federal rulemaking Web...
-
School Chemistry Laboratory Safety Guide
ERIC Educational Resources Information Center
Brundage, Patricia; Palassis, John
2006-01-01
The guide presents information about ordering, using, storing, and maintaining chemicals in the high school laboratory. The guide also provides information about chemical waste, safety and emergency equipment, assessing chemical hazards, common safety symbols and signs, and fundamental resources relating to chemical safety, such as Material…
-
Teaching Technology by Assessing Vehicle Safety
ERIC Educational Resources Information Center
Lazaros, Edward J.
2012-01-01
According to the National Center for Injury Prevention and Control, motor vehicle crashes are the leading cause of death among Americans aged 2-34. Many states have adopted periodic motor vehicle inspection (PMVI) to ensure the safety of the highways, and states that have adopted PMVI report a reduction in highway fatalities. Deaths and injuries…
-
Guidelines for pressure vessel safety assessment
NASA Astrophysics Data System (ADS)
Yukawa, S.
1990-04-01
A technical overview and information on metallic pressure containment vessels and tanks is given. The intent is to provide Occupational Safety and Health Administration (OSHA) personnel and other persons with information to assist in the evaluation of the safety of operating pressure vessels and low pressure storage tanks. The scope is limited to general industrial application vessels and tanks constructed of carbon or low alloy steels and used at temperatures between -75 and 315 C (-100 and 600 F). Information on design codes, materials, fabrication processes, inspection and testing applicable to the vessels and tanks are presented. The majority of the vessels and tanks are made to the rules and requirements of ASME Code Section VIII or API Standard 620. The causes of deterioration and damage in operation are described and methods and capabilities of detecting serious damage and cracking are discussed. Guidelines and recommendations formulated by various groups to inspect for the damages being found and to mitigate the causes and effects of the problems are presented.
-
Report #17-P-0294, June 23, 2017. With management controls that ensure the collaborative development of research products and prioritize chemical safety research needs, the EPA would be better able to conduct faster chemical risk assessments.
-
Zhang, Xiaoli; Wang, Baojian; Chen, Xuefeng
2015-01-01
With the rapid development of sensor technology, various professional sensors are installed on modern machinery to monitor operational processes and assure operational safety, which play an important role in industry and society. In this work a new operational safety assessment approach with wavelet Rényi entropy utilizing sensor-dependent vibration signals is proposed. On the basis of a professional sensor and the corresponding system, sensor-dependent vibration signals are acquired and analyzed by a second generation wavelet package, which reflects time-varying operational characteristic of individual machinery. Derived from the sensor-dependent signals’ wavelet energy distribution over the observed signal frequency range, wavelet Rényi entropy is defined to compute the operational uncertainty of a turbo generator, which is then associated with its operational safety degree. The proposed method is applied in a 50 MW turbo generator, whereupon it is proved to be reasonable and effective for operation and maintenance. PMID:25894934
-
Assessing Rural Coalitions That Address Safety and Health Issues
ERIC Educational Resources Information Center
Burgus, Shari; Schwab, Charles; Shelley, Mack
2012-01-01
Community coalitions can help national organizations meet their objectives. Farm Safety 4 Just Kids depends on coalitions of local people to deliver farm safety and health educational programs to children and their families. These coalitions are called chapters. An evaluation was developed to identify individual coalition's strengths and…
-
ERIC Educational Resources Information Center
Robertson, Mike Fuller
2017-01-01
Safety Management Systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration (FAA) continues to mandate SMS for different segments, the assessment of an organization's safety culture becomes more important. An SMS can facilitate the development of a strong…
-
Final report on the safety assessment of Cocos nucifera (coconut) oil and related ingredients.
Burnett, Christina L; Bergfeld, Wilma F; Belsito, Donald V; Klaassen, Curtis D; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan
2011-05-01
Cocos nucifera (coconut) oil, oil from the dried coconut fruit, is composed of 90% saturated triglycerides. It may function as a fragrance ingredient, hair conditioning agent, or skin-conditioning agent and is reported in 626 cosmetics at concentrations from 0.0001% to 70%. The related ingredients covered in this assessment are fatty acids, and their hydrogenated forms, corresponding fatty alcohols, simple esters, and inorganic and sulfated salts of coconut oil. The salts and esters are expected to have similar toxicological profiles as the oil, its hydrogenated forms, and its constituent fatty acids. Coconut oil and related ingredients are safe as cosmetic ingredients in the practices of use and concentration described in this safety assessment.
-
Endres, J; Welch, T; Perseli, T
2001-01-01
A multimedia touch-screen kiosk was used to assess food safety knowledge and convey food safety principles to 93 high school science teachers and 165 students. The kiosk program based on the FightBAC messages informed users of correct responses and reasons for the response. Teachers correctly answered more questions than students; however, for the areas of hand washing, sources of foodborne illness, and handling of leftover foods, at least 40% of both students and teachers provided incorrect answers.
-
Marlowe, Jennifer L; Akopian, Violetta; Karmali, Priya; Kornbrust, Douglas; Lockridge, Jennifer; Semple, Sean
2017-08-01
The use of lipid formulations has greatly improved the ability to effectively deliver oligonucleotides and has been instrumental in the rapid expansion of therapeutic development programs using oligonucleotide drugs. However, the development of such complex multicomponent therapeutics requires the implementation of unique, scientifically sound approaches to the nonclinical development of these drugs, based upon a hybrid of knowledge and experiences drawn from small molecule, protein, and oligonucleotide therapeutic drug development. The relative paucity of directly applicable regulatory guidance documents for oligonucleotide therapeutics in general has resulted in the generation of multiple white papers from oligonucleotide drug development experts and members of the Oligonucleotide Safety Working Group (OSWG). The members of the Formulated Oligonucleotide Subcommittee of the OSWG have utilized their collective experience working with a variety of formulations and their associated oligonucleotide payloads, as well as their insights into regulatory considerations and expectations, to generate a series of consensus recommendations for the pharmacokinetic characterization and nonclinical safety assessment of this unique class of therapeutics. It should be noted that the focus of Subcommittee discussions was on lipid nanoparticle and other types of particulate formulations of therapeutic oligonucleotides and not on conjugates or other types of modifications of oligonucleotide structure intended to facilitate delivery.
-
NASA Technical Reports Server (NTRS)
Habegger, L. J.; Gasper, J. R.; Brown, C.
1980-01-01
Data readily available from the literature were used to make an initial comparison of the health and safety risks of a fission power system with fuel reprocessing; a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine; a central-station, terrestrial, solar photovoltaic power system; the satellite power system; and a first-generation fusion system. The assessment approach consists of the identification of health and safety issues in each phase of the energy cycle from raw material extraction through electrical generation, waste disposal, and system deactivation; quantitative or qualitative evaluation of impact severity; and the rating of each issue with regard to known or potential impact level and level of uncertainty.
-
MacDonald, Noni E; Smith, Jennifer; Appleton, Mary
2012-09-01
For decades vaccine program managers and governments have devoted many resources to addressing public vaccine concerns, vaccine risk perception, risk management and safety assessment. Despite ever growing evidence that vaccines are safe and effective, public concerns continue. Education and evidence based scientific messages have not ended concerns. How can governments and programs more effectively address the public's vaccine concerns and increase confidence in the vaccine safety system? Vaccination hesitation has been attributed to concerns about vaccine safety, perceptions of high vaccine risks and low disease risk and consequences. Even when the public believes vaccines are important for protection many still have concerns about vaccine safety. This overview explores how heuristics affect public perception of vaccines and vaccine safety, how the public finds and uses vaccine information, and then proposes strategies for changes in the approach to vaccine safety communications. Facts and evidence confirming the safety of vaccines are not enough. Vaccine beliefs and behaviours must be shaped. This will require a shift in the what, when, how and why of vaccine risk and benefit communication content and practice. A change to a behavioural change strategy such as the WHO COMBI program that has been applied to disease eradication efforts is suggested. Copyright © 2011. Published by Elsevier Ltd.. All rights reserved.
-
Architecting the Safety Assessment of Large-scale Systems Integration
2009-12-01
Electromagnetic Radiation to Ordnance ( HERO ) Hazards of Electromagnetic Radiation to Fuel (HERF) The main reason that this particular safety study... radiation , high voltage electric shocks and explosives safety. 1. Radiation Hazards (RADHAZ) RADHAZ describes the hazards of electromagnetic radiation ...OP3565/NAVAIR 16-1-529 [19 and 20], these hazards are segregated as follows: Hazards of Electromagnetic
-
[Clinical assessment of drug safety].
Imbs, J-L; Welsch, M
2007-09-01
The environment of drug safety is changing. In addition to the current system of pharmacovigilance based on spontaneous report of adverse events, clinical data observed in a given patient with a given symptom is taken into consideration and compared with information coming from pharmacovigilance data bases, which is then analyzed for causality by the experts of both the promotor and the public network. Such information is integrated into a risk management strategy, defined together by the French drug agency (Afssaps) and the marketing authorization holder. This strategy includes a pharmacovigilance plan and, if possible, a risk minimisation plan.
-
Cusato, Sueli; Gameiro, Augusto H; Corassin, Carlos H; Sant'ana, Anderson S; Cruz, Adriano G; Faria, José de Assis F; de Oliveira, Carlos Augusto F
2013-01-01
The present study describes the implementation of a food safety system in a dairy processing plant located in the State of São Paulo, Brazil, and the challenges found during the process. In addition, microbiological indicators have been used to assess system's implementation performance. The steps involved in the implementation of a food safety system included a diagnosis of the prerequisites, implementation of the good manufacturing practices (GMPs), sanitation standard operating procedures (SSOPs), training of the food handlers, and hazard analysis and critical control point (HACCP). In the initial diagnosis, conformity with 70.7% (n=106) of the items analyzed was observed. A total of 12 critical control points (CCPs) were identified: (1) reception of the raw milk, (2) storage of the raw milk, (3 and 4) reception of the ingredients and packaging, (5) milk pasteurization, (6 and 7) fermentation and cooling, (8) addition of ingredients, (9) filling, (10) storage of the finished product, (11) dispatching of the product, and (12) sanitization of the equipment. After implementation of the food safety system, a significant reduction in the yeast and mold count was observed (p<0.05). The main difficulties encountered for the implementation of food safety system were related to the implementation of actions established in the flow chart and to the need for constant training/adherence of the workers to the system. Despite this, the implementation of the food safety system was shown to be challenging, but feasible to be reached by small-scale food industries.
-
Patlovich, Scott J; Emery, Robert J; Whitehead, Lawrence W; Brown, Eric L; Flores, Rene
2015-03-01
Because the origins of the biological safety profession are rooted in the control and prevention of laboratory-associated infections, the vocation focuses primarily on the safe handling of specimens within the laboratory. But in many cases, the specimens and samples handled in the lab are originally collected in the field where a broader set of possible exposure considerations may be present, each with varying degrees of controllability. The failure to adequately control the risks associated with collecting biological specimens in the field may result in illness or injury, and could have a direct impact on laboratory safety, if infectious specimens were packaged or transported inappropriately, for example. This study developed a web-based survey distributed to practicing biological safety professionals to determine the prevalence of and extent to which biological safety programs consider and evaluate field collection activities. In cases where such issues were considered, the data collected characterize the types of controls and methods of oversight at the institutional level that are employed. Sixty-one percent (61%) of the survey respondents indicated that research involving the field collection of biological specimens is conducted at their institutions. A majority (79%) of these field collection activities occur at academic institutions. Twenty-seven percent (27%) of respondents indicated that their safety committees do not consider issues related to biological specimens collected in the field, and only 25% with an oversight committee charged to review field collection protocols have generated a field research-specific risk assessment form to facilitate the assembly of pertinent information for a project risk assessment review. The results also indicated that most biosafety professionals (73% overall; 71% from institutions conducting field collection activities) have not been formally trained on the topic, but many (64% overall; 87% from institutions conducting
-
Safety of railroad passenger vehicle dynamics : final summary report
DOT National Transportation Integrated Search
2002-07-01
This report is a summary of all the work done by Foster-Miller on the passenger rail vehicle dynamic safety under the contract awarded by the FRA. The report presents key issues and findings in the safety assessments and a safety assessment methodolo...
-
[Assessment of the patient-safety culture in a healthcare district].
Pozo Muñoz, F; Padilla Marín, V
2013-01-01
1) To describe the frequency of positive attitudes and behaviours, in terms of patient safety, among the healthcare providers working in a healthcare district; 2) to determine whether the level of safety-related culture differs from other studies; and 3) to analyse negatively valued dimensions, and to establish areas for their improvement. A descriptive, cross-sectional study based on the results of an evaluation of the safety-related culture was conducted on a randomly selected sample of 247 healthcare providers, by using the Spanish adaptation of the Hospital Survey on Patient Safety Culture (HSOPSC) designed by the Agency for Healthcare Research and Quality (AHRQ), as the evaluation tool. Positive and negative responses were analysed, as well as the global score. Results were compared with international and national results. A total of 176 completed survey questionnaires were analysed (response rate: 71.26%); 50% of responders described the safety climate as very good, 37% as acceptable, and 7% as excellent. Strong points were: «Teamwork within the units» (80.82%) and «Supervisor/manager expectations and actions» (80.54%). Dimensions identified for potential improvement included: «Staffing» (37.93%), «Non-punitive response to error» (41.67%), and «Frequency of event reporting» (49.05%). Strong and weak points were identified in the safety-related culture of the healthcare district studied, together with potential improvement areas. Benchmarking at the international level showed that our safety-related culture was within the average of hospitals, while at the national level, our results were above the average of hospitals. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.
-
Pupil Transportation Safety Program Plan.
ERIC Educational Resources Information Center
Delahanty, Joseph F.; And Others
This study has been undertaken to assess the magnitude of the school bus safety problem and to develop a plan to improve pupil transportation safety. The resulting report provides estimates of school bus population and daily usage, gives an account of injuries and fatalities that occur annually, and compares the safety records of school buses to…
-
2008-03-01
In this report the various elements of the safety and nutritional assessment procedure for genetically modified (GM) plant derived food and feed are discussed, in particular the potential and limitations of animal feeding trials for the safety and nutritional testing of whole GM food and feed. The general principles for the risk assessment of GM plants and derived food and feed are followed, as described in the EFSA guidance document of the EFSA Scientific Panel on Genetically Modified Organisms. In Section 1 the mandate, scope and general principles for risk assessment of GM plant derived food and feed are discussed. Products under consideration are food and feed derived from GM plants, such as maize, soybeans, oilseed rape and cotton, modified through the introduction of one or more genes coding for agronomic input traits like herbicide tolerance and/or insect resistance. Furthermore GM plant derived food and feed, which have been obtained through extensive genetic modifications targeted at specific alterations of metabolic pathways leading to improved nutritional and/or health characteristics, such as rice containing beta-carotene, soybeans with enhanced oleic acid content, or tomato with increased concentration of flavonoids, are considered. The safety assessment of GM plants and derived food and feed follows a comparative approach, i.e. the food and feed are compared with their non-GM counterparts in order to identify intended and unintended (unexpected) differences which subsequently are assessed with respect to their potential impact on the environment, safety for humans and animals, and nutritional quality. Key elements of the assessment procedure are the molecular, compositional, phenotypic and agronomic analysis in order to identify similarities and differences between the GM plant and its near isogenic counterpart. The safety assessment is focussed on (i) the presence and characteristics of newly expressed proteins and other new constituents and possible
-
Lin, Chih-Hui; Lu, Chien-Te; Lin, Hsin-Tang; Pan, Tzu-Ming
2009-03-11
Sporamins are tuberous storage proteins and account for 80% of soluble protein in sweet potato tubers with trypsin-inhibitory activity. The expression of sporamin protein in transgenic Chinese kale (line BoA 3-1) conferred insecticidal activity toward corn earworm [ Helicoverpa armigera (Hubner)] in a previous report. In this study, we present a preliminary safety assessment of transgenic Chinese kale BoA 3-1. Bioinformatic and simulated gastric fluid (SGF) analyses were performed to evaluate the allergenicity of sporamin protein. The substantial equivalence between transgenic Chinese kale and its wild-type host has been demonstrated by the comparison of important constituents. A reliable real-time polymerase chain reaction (PCR) detection method was also developed to control sample quality. Despite the results of most evaluations in this study being negative, the safety of sporamin in transgenic Chinese kale BoA 3-1 was uncluded because of the allergenic risk revealed by bioinformatic analysis.
-
Aksan, Nazan; Hacker, Sarah D; Sager, Lauren; Dawson, Jeffrey; Anderson, Steven; Rizzo, Matthew
2016-03-01
Forty-two younger (Mean age = 35) and 37 older drivers (Mean age = 77) completed four similar simulated drives. In addition, 32 younger and 30 older drivers completed a standard on-road drive in an instrumented vehicle. Performance in the simulated drives was evaluated using both electronic drive data and video-review of errors. Safety errors during the on-road drive were evaluated by a certified driving instructor blind to simulator performance, using state Department of Transportation criteria. We examined the degree of convergence in performance across the two platforms on various driving tasks including lane change, lane keeping, speed control, stopping, turns, and overall performance. Differences based on age group indicated a pattern of strong relative validity for simulator measures. However, relative rank-order in specific metrics of performance suggested a pattern of moderate relative validity. The findings have implications for the use of simulators in assessments of driving safety as well as its use in training and/or rehabilitation settings.
-
Aksan, Nazan; Hacker, Sarah D.; Sager, Lauren; Dawson, Jeffrey; Anderson, Steven; Rizzo, Matthew
2017-01-01
Forty-two younger (Mean age = 35) and 37 older drivers (Mean age = 77) completed four similar simulated drives. In addition, 32 younger and 30 older drivers completed a standard on-road drive in an instrumented vehicle. Performance in the simulated drives was evaluated using both electronic drive data and video-review of errors. Safety errors during the on-road drive were evaluated by a certified driving instructor blind to simulator performance, using state Department of Transportation criteria. We examined the degree of convergence in performance across the two platforms on various driving tasks including lane change, lane keeping, speed control, stopping, turns, and overall performance. Differences based on age group indicated a pattern of strong relative validity for simulator measures. However, relative rank-order in specific metrics of performance suggested a pattern of moderate relative validity. The findings have implications for the use of simulators in assessments of driving safety as well as its use in training and/or rehabilitation settings. PMID:28649572
-
Koch, Michael S; DeSesso, John M; Williams, Amy Lavin; Michalek, Suzanne; Hammond, Bruce
2016-01-01
To determine the reliability of food safety studies carried out in rodents with genetically modified (GM) crops, a Food Safety Study Reliability Tool (FSSRTool) was adapted from the European Centre for the Validation of Alternative Methods' (ECVAM) ToxRTool. Reliability was defined as the inherent quality of the study with regard to use of standardized testing methodology, full documentation of experimental procedures and results, and the plausibility of the findings. Codex guidelines for GM crop safety evaluations indicate toxicology studies are not needed when comparability of the GM crop to its conventional counterpart has been demonstrated. This guidance notwithstanding, animal feeding studies have routinely been conducted with GM crops, but their conclusions on safety are not always consistent. To accurately evaluate potential risks from GM crops, risk assessors need clearly interpretable results from reliable studies. The development of the FSSRTool, which provides the user with a means of assessing the reliability of a toxicology study to inform risk assessment, is discussed. Its application to the body of literature on GM crop food safety studies demonstrates that reliable studies report no toxicologically relevant differences between rodents fed GM crops or their non-GM comparators.
-
Road Infrastructure Safety Management in Poland
NASA Astrophysics Data System (ADS)
Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw
2017-10-01
The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road
-
Mohseni, Peyman Hossein; Farshad, Ali Asghar; Mirkazemi, Roksana; Orak, Rouhangiz Jamshidi
2015-01-01
The purpose of this study was to assess living and workplace safety conditions of construction workers in Tehran, Iran. This cross-sectional study was conducted among 410 construction sites in a municipal area of Tehran whose municipal building permits were issued in 2011. Data on ventilation, workplace safety and hygiene were collected by direct observation and interviews with site foremen. Noise levels were estimated from 10 sound-level-meter stations in the municipality area. Lack of ventilation in the workers' rooms was abundant. Bathrooms were unhygienic and minimum requirements such as lighting and ventilation did not exist in 80% of the cases. In nearly 50% of large construction sites, sewage and garbage disposal were inappropriate. Elevator safety was poor at all sites and no measures for fall prevention were present in over 88% of active construction sites. This study showed that the mean 24-h equivalent continuous sound level Leq was over 70 dB in 80% of the sites during weekdays. The results of this study revealed poor health and safety living and working conditions of construction workers in Tehran.
-
Tomita, Machiko R; Saharan, Sumandeep; Rajendran, Sheela; Nochajski, Susan M; Schweitzer, Jo A
2014-01-01
OBJECTIVE. To identify psychometric properties of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults. METHOD. We tested content validity, test-retest reliability, interrater reliability, construct validity, convergent and discriminant validity, and responsiveness to change. RESULTS. The content validity index was .98, the intraclass correlation coefficient for test-retest reliability was .97, and the interrater reliability was .89. The difference on identified risk factors between the use and nonuse of the HSSAT was significant (p = .005). Convergent validity with the Centers for Disease Control and Prevention Home Safety Checklist was high (r = .65), and discriminant validity with fear of falling was very low (r = .10). The responsiveness to change was moderate (standardized response mean = 0.57). CONCLUSION. The HSSAT is a reliable and valid instrument to identify fall risks in a home environment, and the HSSAT booklet is effective as educational material leading to improvement in home safety. Copyright © 2014 by the American Occupational Therapy Association, Inc.
-
Image processing for safety assessment in civil engineering.
Ferrer, Belen; Pomares, Juan C; Irles, Ramon; Espinosa, Julian; Mas, David
2013-06-20
Behavior analysis of construction safety systems is of fundamental importance to avoid accidental injuries. Traditionally, measurements of dynamic actions in civil engineering have been done through accelerometers, but high-speed cameras and image processing techniques can play an important role in this area. Here, we propose using morphological image filtering and Hough transform on high-speed video sequence as tools for dynamic measurements on that field. The presented method is applied to obtain the trajectory and acceleration of a cylindrical ballast falling from a building and trapped by a thread net. Results show that safety recommendations given in construction codes can be potentially dangerous for workers.
-
Safety management and risk assessment in chemical laboratories.
Marendaz, Jean-Luc; Friedrich, Kirstin; Meyer, Thierry
2011-01-01
The present paper highlights a new safety management program, MICE (Management, Information, Control and Emergency), which has been specifically adapted for the academic environment. The process starts with an exhaustive hazard inventory supported by a platform assembling specific hazards encountered in laboratories and their subsequent classification. A proof of concept is given by a series of implementations in the domain of chemistry targeting workplace health protection. The methodology is expressed through three examples to illustrate how the MICE program can be used to address safety concerns regarding chemicals, strong magnetic fields and nanoparticles in research laboratories. A comprehensive chemical management program is also depicted.
-
Oomen, Agnes G.; Bos, Peter M. J.; Fernandes, Teresa F.; Hund-Rinke, Kerstin; Boraschi, Diana; Byrne, Hugh J.; Aschberger, Karin; Gottardo, Stefania; von der Kammer, Frank; Kühnel, Dana; Hristozov, Danail; Marcomini, Antonio; Migliore, Lucia; Scott-Fordsmand, Janeck; Wick, Peter
2014-01-01
Bringing together topic-related European Union (EU)-funded projects, the so-called “NanoSafety Cluster” aims at identifying key areas for further research on risk assessment procedures for nanomaterials (NM). The outcome of NanoSafety Cluster Working Group 10, this commentary presents a vision for concern-driven integrated approaches for the (eco-)toxicological testing and assessment (IATA) of NM. Such approaches should start out by determining concerns, i.e., specific information needs for a given NM based on realistic exposure scenarios. Recognised concerns can be addressed in a set of tiers using standardised protocols for NM preparation and testing. Tier 1 includes determining physico-chemical properties, non-testing (e.g., structure–activity relationships) and evaluating existing data. In tier 2, a limited set of in vitro and in vivo tests are performed that can either indicate that the risk of the specific concern is sufficiently known or indicate the need for further testing, including details for such testing. Ecotoxicological testing begins with representative test organisms followed by complex test systems. After each tier, it is evaluated whether the information gained permits assessing the safety of the NM so that further testing can be waived. By effectively exploiting all available information, IATA allow accelerating the risk assessment process and reducing testing costs and animal use (in line with the 3Rs principle implemented in EU Directive 2010/63/EU). Combining material properties, exposure, biokinetics and hazard data, information gained with IATA can be used to recognise groups of NM based upon similar modes of action. Grouping of substances in return should form integral part of the IATA themselves. PMID:23641967
-
Orenstein, Lauren A V; Orenstein, Evan W; Teguete, Ibrahima; Kodio, Mamoudou; Tapia, Milagritos; Sow, Samba O; Levine, Myron M
2012-01-01
Maternal immunization has gained traction as a strategy to diminish maternal and young infant mortality attributable to infectious diseases. Background rates of adverse pregnancy outcomes are crucial to interpret results of clinical trials in Sub-Saharan Africa. We developed a mathematical model that calculates a clinical trial's expected number of neonatal and maternal deaths at an interim safety assessment based on the person-time observed during different risk windows. This model was compared to crude multiplication of the maternal mortality ratio and neonatal mortality rate by the number of live births. Systematic reviews of severe acute maternal morbidity (SAMM), low birth weight (LBW), prematurity, and major congenital malformations (MCM) in Sub-Saharan African countries were also performed. Accounting for the person-time observed during different risk periods yields lower, more conservative estimates of expected maternal and neonatal deaths, particularly at an interim safety evaluation soon after a large number of deliveries. Median incidence of SAMM in 16 reports was 40.7 (IQR: 10.6-73.3) per 1,000 total births, and the most common causes were hemorrhage (34%), dystocia (22%), and severe hypertensive disorders of pregnancy (22%). Proportions of liveborn infants who were LBW (median 13.3%, IQR: 9.9-16.4) or premature (median 15.4%, IQR: 10.6-19.1) were similar across geographic region, study design, and institutional setting. The median incidence of MCM per 1,000 live births was 14.4 (IQR: 5.5-17.6), with the musculoskeletal system comprising 30%. Some clinical trials assessing whether maternal immunization can improve pregnancy and young infant outcomes in the developing world have made ethics-based decisions not to use a pure placebo control. Consequently, reliable background rates of adverse pregnancy outcomes are necessary to distinguish between vaccine benefits and safety concerns. Local studies that quantify population-based background rates of adverse
-
Onboard Safety Technology Survey Synthesis - Final Report
DOT National Transportation Integrated Search
2008-01-01
The Federal Motor Carrier Safety Administration (FMCSA) funded this project to collect, merge, and conduct an assessment of onboard safety system surveys and resulting data sets that may benefit commercial vehicle operations safety and future researc...
-
Lindborg, T; Thorne, M; Andersson, E; Becker, J; Brandefelt, J; Cabianca, T; Gunia, M; Ikonen, A T K; Johansson, E; Kangasniemi, V; Kautsky, U; Kirchner, G; Klos, R; Kowe, R; Kontula, A; Kupiainen, P; Lahdenperä, A-M; Lord, N S; Lunt, D J; Näslund, J-O; Nordén, M; Norris, S; Pérez-Sánchez, D; Proverbio, A; Riekki, K; Rübel, A; Sweeck, L; Walke, R; Xu, S; Smith, G; Pröhl, G
2018-03-01
The International Atomic Energy Agency has coordinated an international project addressing climate change and landscape development in post-closure safety assessments of solid radioactive waste disposal. The work has been supported by results of parallel on-going research that has been published in a variety of reports and peer reviewed journal articles. The project is due to be described in detail in a forthcoming IAEA report. Noting the multi-disciplinary nature of post-closure safety assessments, here, an overview of the work is given to provide researchers in the broader fields of radioecology and radiological safety assessment with a review of the work that has been undertaken. It is hoped that such dissemination will support and promote integrated understanding and coherent treatment of climate change and landscape development within an overall assessment process. The key activities undertaken in the project were: identification of the key processes that drive environmental change (mainly those associated with climate and climate change), and description of how a relevant future may develop on a global scale; development of a methodology for characterising environmental change that is valid on a global scale, showing how modelled global changes in climate can be downscaled to provide information that may be needed for characterising environmental change in site-specific assessments, and illustrating different aspects of the methodology in a number of case studies that show the evolution of site characteristics and the implications for the dose assessment models. Overall, the study has shown that quantitative climate and landscape modelling has now developed to the stage that it can be used to define an envelope of climate and landscape change scenarios at specific sites and under specific greenhouse-gas emissions assumptions that is suitable for use in quantitative post-closure performance assessments. These scenarios are not predictions of the future, but
-
Oketch-Rabah, Hellen A; Roe, Amy L; Gurley, Bill J; Griffiths, James C; Giancaspro, Gabriel I
2016-12-01
The increasing consumption of amino acids from a wide variety of sources, including dietary supplements, natural health products, medical foods, infant formulas, athletic and work-out products, herbal medicines, and other national and international categories of nutritional and functional food products, increases the exposure to amino acids to amounts far beyond those normally obtained from the diet, thereby necessitating appropriate and robust safety assessments of these ingredients. Safety assessments of amino acids, similar to all food constituents, largely rely on the establishment of an upper limit [Tolerable Upper Intake Level (UL)] considered to be a guide for avoiding high intake, above which adverse or toxic effects might occur. However, reliable ULs have been difficult or impossible to define for amino acids because of inadequate toxicity studies in animals and scarce or missing clinical data, as well as a paucity or absence of adverse event reporting data. This review examines 2 amino acids that have been associated with in-market adverse events to show how quality specifications might have helped prevent the adverse clinical outcomes. We further highlight the importance of various factors that should be incorporated into an overall safety assessment of these and other amino acids. In addition to the traditional reliance on the established UL, well-defined quality specifications, review of synthesis and production strategies, potential interactions with drugs, contraindications with certain disease states, and cautionary use within certain age groups should all be taken into consideration. © 2016 American Society for Nutrition.
-
Arch, B N; Thurston, M N
2013-06-01
Deaths and injuries related to fires are largely preventable events. In the UK, a plethora of community-based fire safety initiatives have been introduced over the last 25 years, often led by fire and rescue services, to address this issue. This paper focuses on one such initiative--home safety assessments (HSAs). Cheshire Fire and Rescue Service (in England) implemented a uniquely large-scale HSA intervention. This paper assesses its effectiveness. The impact of HSAs was assessed in relation to three outcomes: accidental dwelling fires (ADFs), ADFs contained and injuries arising from ADFs. A two-period comparison in fire-related rates of incidences in Cheshire between 2002 and 2011 was implemented, using Poisson regression and adjusting for the national temporal trend using a control group comprising the 37 other English non-metropolitan fire-services. Significant reductions were observed in rates of ADFs [incidence rate ratios (IRR): 0.79, 95% confidence interval (CI): 0.74-0.83, P < 0.001, 2002/03-2007/08 versus 2008/09-2010/11] and associated injuries (IRR: 0.49, 95% CI: 0.39-0.60, P < 0.001, 2002/03-2006/07 versus 2007/08-2010/11), but not in the proportion of fires contained to room of origin. There is strong evidence to suggest that the intervention was successful in reducing domestic fires and related injuries.
-
Nuclear criticality safety assessment of the low level radioactive waste disposal facility trenches
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kahook, S.D.
1994-04-01
Results of the analyses performed to evaluate the possibility of nuclear criticality in the Low Level Radioactive Waste Disposal Facility (LLRWDF) trenches are documented in this report. The studies presented in this document are limited to assessment of the possibility of criticality due to existing conditions in the LLRWDF. This document does not propose nor set limits for enriched uranium (EU) burial in the LLRWDF and is not a nuclear criticality safety evaluation nor analysis. The calculations presented in the report are Level 2 calculations as defined by the E7 Procedure 2.31, Engineering Calculations.
-
An assessment by the Statin Muscle Safety Task Force: 2014 update.
Rosenson, Robert S; Baker, Steven K; Jacobson, Terry A; Kopecky, Stephen L; Parker, Beth A; The National Lipid Association's Muscle Safety Expert Panel
2014-01-01
The National Lipid Association's Muscle Safety Expert Panel was charged with the duty of examining the definitions for statin-associated muscle adverse events, development of a clinical index to assess myalgia, and the use of diagnostic neuromuscular studies to investigate muscle adverse events. We provide guidance as to when a patient should be considered for referral to neuromuscular specialists and indications for the performance of a skeletal muscle biopsy. Based on this review of evidence, we developed an algorithm for the evaluation and treatment of patients who may be intolerant to statins as the result of adverse muscle events. The panel was composed of clinical cardiologists, clinical lipidologists, an exercise physiologist, and a neuromuscular specialist. Copyright © 2014 National Lipid Association. Published by Elsevier Inc. All rights reserved.
-
Safety assessment of probiotics for human use
USDA-ARS?s Scientific Manuscript database
The safety of probiotics is tied to their intended use, which includes consideration of the potential vulnerability of the consumer or patient, dose and duration of consumption, and both the manner and frequency of administration. Unique to probiotics is that they are living organisms when administ...
-
Methodology for assessing the safety of Hydrogen Systems: HyRAM 1.1 technical reference manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Groth, Katrina; Hecht, Ethan; Reynolds, John Thomas
The HyRAM software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM is designed to facilitate the use of state-of-the-art science and engineering models to conduct robust, repeatable assessments of hydrogen safety, hazards, and risk. HyRAM is envisioned as a unifying platform combining validated, analytical models of hydrogen behavior, a stan- dardized, transparent QRA approach, and engineering models and generic data for hydrogen installations. HyRAM is being developed at Sandia National Laboratories for the U. S. De- partment of Energy to increase access to technical data about hydrogen safety andmore » to enable the use of that data to support development and revision of national and international codes and standards. This document provides a description of the methodology and models contained in the HyRAM version 1.1. HyRAM 1.1 includes generic probabilities for hydrogen equipment fail- ures, probabilistic models for the impact of heat flux on humans and structures, and computa- tionally and experimentally validated analytical and first order models of hydrogen release and flame physics. HyRAM 1.1 integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing hydrogen hazards (thermal effects from jet fires, overpressure effects from deflagrations), and assessing impact on people and structures. HyRAM is a prototype software in active development and thus the models and data may change. This report will be updated at appropriate developmental intervals.« less
-
Russ, Alissa L; Jahn, Michelle A; Patel, Himalaya; Porter, Brian W; Nguyen, Khoa A; Zillich, Alan J; Linsky, Amy; Simon, Steven R
2018-06-01
An electronic medication reconciliation tool was previously developed by another research team to aid provider-patient communication for medication reconciliation. To evaluate the usability of this tool, we integrated artificial safety probes into standard usability methods. The objective of this article is to describe this method of using safety probes, which enabled us to evaluate how well the tool supports users' detection of medication discrepancies. We completed a mixed-method usability evaluation in a simulated setting with 30 participants: 20 healthcare professionals (HCPs) and 10 patients. We used factual scenarios but embedded three artificial safety probes: (1) a missing medication (i.e., omission); (2) an extraneous medication (i.e., commission); and (3) an inaccurate dose (i.e., dose discrepancy). We measured users' detection of each probe to estimate the probability that a HCP or patient would detect these discrepancies. Additionally, we recorded participants' detection of naturally occurring discrepancies. Each safety probe was detected by ≤50% of HCPs. Patients' detection rates were generally higher. Estimates indicate that a HCP and patient, together, would detect 44.8% of these medication discrepancies. Additionally, HCPs and patients detected 25 and 45 naturally-occurring discrepancies, respectively. Overall, detection of medication discrepancies was low. Findings indicate that more advanced interface designs are warranted. Future research is needed on how technologies can be designed to better aid HCPs' and patients' detection of medication discrepancies. This is one of the first studies to evaluate the usability of a collaborative medication reconciliation tool and assess HCPs' and patients' detection of medication discrepancies. Results demonstrate that embedded safety probes can enhance standard usability methods by measuring additional, clinically-focused usability outcomes. The novel safety probes we used may serve as an initial, standard
-
Assessment of the effects of the zero gravity environment on the health and safety of space workers
NASA Technical Reports Server (NTRS)
1980-01-01
A review was conducted of currently available information relating to adverse effects to the health and safety that space power system (SPS) space workers may experience. Currently available information on the responses of humans to space flight is somewhat limited and was obtained under conditions which are grossly different from conditions to be experienced by future space workers. The limitations in information and differences in conditions were considered in the assessment of potential health and safety hazards to the SPS space workers. The study did not disclose any adverse effects that would result in long term deviations to the medical physiological health of space workers so long as proper preventive or ameliorating action were taken.
-
DOT National Transportation Integrated Search
2013-01-01
This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...
-
Patient Safety Threat - Syringe Reuse
... Fingerstick Devices Clinical Reminder: Insulin Pens Publications Infection Control Assessment of Ambulatory Surgical Centers Meetings Insurance Stakeholders Meeting – December 2011 Ambulatory Surgical Centers – October 2010 Safety by Design – May 2010 Sticking with Safety – May 2010 Injection ...
-
Interchange Safety Analysis Tool (ISAT) : user manual
DOT National Transportation Integrated Search
2007-06-01
This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...
-
Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan
2015-01-01
Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.
-
NASA Astrophysics Data System (ADS)
Munier, R.
2011-12-01
Located deep into the Baltic shield, far from active plate boundaries and volcanism, Swedish bedrock is characterised by a low frequency of earthquakes of small magnitudes. Yet, faults, predominantly in the Lapland region, offsetting the quarternary regolith ten meters or more, reveal that Swedish bedrock suffered from substantial earthquake activity in connection to the retreat of the latest continental glacier, Weichsel. Storage of nuclear wastes, hazardous for hundreds of thousand years, requires, firstly, isolation of radionuclides and, secondly, retardation of the nuclides should the barriers fail. Swedish regulations require that safety is demonstrated for a period of a million years. Consequently, the repository must be designed to resist the impact of several continental glaciers. Large, glacially induced, earthquakes near the repository have the potential of triggering slip along fractures across the canisters containing the nuclear wastes, thereby simultaneously jeopardising isolation, retardation and, hence, long term safety. It has therefore been crucial to assess the impact of such intraplate earthquake upon the primary functions of the repository. We conclude that, by appropriate design of the repository, the negative impact of earthquakes on long term safety can be considerably lessened. We were, additionally, able to demonstrate compliance with Swedish regulations in our safety assessment, SR-Site, submitted to the authorities earlier this year. However, the assessment required a number of critical assumptions, e.g. concerning the strain rate and the fracture properties of the rock, many of which are subject of current research in the geoscientific community. By a conservative approach, though, we judge to have adequately propagated critical uncertainties through the assessment and bound the uncertainty space.
-
Preliminary safety assessment of C-8 xylitol monoester and xylitol phosphate esters.
Silveira, J E P S; Pereda, M C V; Nogueira, C; Dieamant, G; Cesar, C K M; Assanome, K M; Silva, M S; Torello, C O; Queiroz, M L S; Eberlin, S
2016-02-01
Most of the cosmetic compounds with preservative properties available in the market pose some risks concerning safety, such as the possibility of causing sensitization. Due to the fact that there are few options, the proper development of new molecules with this purpose is needed. Xylitol is a natural sugar, and the antimicrobial properties of xylitol-derived compounds have already been described in the literature. C-8 xylitol monoester and xylitol phosphate esters may be useful for the development of skincare products. As an initial screen for safety of chemicals, the combination of in silico methods and in vitro testing can aid in prioritizing resources in toxicological investigations while reducing the ethical and monetary costs that are related to animal and human testing. This study was designed to evaluate the safety of C-8 xylitol monoester and xylitol phosphate esters regarding carcinogenicity, mutagenicity, skin and eye irritation/corrosion and sensitization through alternative methods. For the initial safety assessment, quantitative structure-activity relationship methodology was used. The prediction of the parameters carcinogenicity/mutagenicity, skin and eye irritation/corrosion and sensitization was generated from the chemical structure. The analysis also comprised physical-chemical properties, Cramer rules, threshold of toxicological concern and Michael reaction. In silico results of candidate molecules were compared to 19 compounds with preservative properties that are available in the market. Additionally, in vitro tests (Ames test for mutagenicity, cytotoxicity and phototoxicity tests and hen's egg test--chorioallantoic membrane for irritation) were performed to complement the evaluation. In silico evaluation of both molecules presented no structural alerts related to eye and skin irritation, corrosion and sensitization, but some alerts for micronucleus and carcinogenicity were detected. However, by comparison, C-8 xylitol monoester, xylitol
-
3-T MRI safety assessments of magnetic dental attachments and castable magnetic alloys
Miyata, K; Abe, Y; Ishii, T; Ishigami, T; Ohtani, K; Nagai, E; Ohyama, T; Umekawa, Y; Nakabayashi, S
2015-01-01
Objectives: To assess the safety of different magnetic dental attachments during 3-T MRI according to the American Society for Testing and Materials F2182-09 and F2052-06e1 standard testing methods and to develop a method to determine MRI compatibility by measuring magnetically induced torque. Methods: The temperature elevations, magnetically induced forces and torques of a ferromagnetic stainless steel keeper, a coping comprising a keeper and a cast magnetic alloy coping were measured on MRI systems. Results: The coping comprising a keeper demonstrated the maximum temperature increase (1.42 °C) for the whole-body-averaged specific absorption rate and was calculated as 2.1 W kg−1 with the saline phantom. All deflection angles exceeded 45°. The cast magnetic alloy coping had the greatest deflection force (0.33 N) during 3-T MRI and torque (1.015 mN m) during 0.3-T MRI. Conclusions: The tested devices showed minimal radiofrequency (RF)-induced heating in a 3-T MR environment, but the cast magnetic alloy coping showed a magnetically induced deflection force and torque approximately eight times that of the keepers. For safety, magnetic dental attachments should be inspected before and after MRI and large prostheses containing cast magnetic alloy should be removed. Although magnetic dental attachments may pose no great risk of RF-induced heating or magnetically induced torque during 3-T MRI, their magnetically induced deflection forces tended to exceed acceptable limits. Therefore, the inspection of such devices before and after MRI is important for patient safety. PMID:25785821
-
DOT National Transportation Integrated Search
1996-01-01
This report describes the nation's progress in achieving goals for the use of safety belts in motor vehicles, assesses the strategies used most successfully by some states to increase the use of safety belts, and identifies federal strategies that co...
-
Patient safety culture among nurses.
Ammouri, A A; Tailakh, A K; Muliira, J K; Geethakrishnan, R; Al Kindi, S N
2015-03-01
Patient safety is considered to be crucial to healthcare quality and is one of the major parameters monitored by all healthcare organizations around the world. Nurses play a vital role in maintaining and promoting patient safety due to the nature of their work. The purpose of this study was to investigate nurses' perceptions about patient safety culture and to identify the factors that need to be emphasized in order to develop and maintain the culture of safety among nurses in Oman. A descriptive and cross-sectional design was used. Patient safety culture was assessed by using the Hospital Survey on Patient Safety Culture among 414 registered nurses working in four major governmental hospitals in Oman. Descriptive statistics and general linear regression were employed to assess the association between patient safety culture and demographic variables. Nurses who perceived more supervisor or manager expectations, feedback and communications about errors, teamwork across hospital units, and hospital handoffs and transitions had more overall perception of patient safety. Nurses who perceived more teamwork within units and more feedback and communications about errors had more frequency of events reported. Furthermore, nurses who had more years of experience and were working in teaching hospitals had more perception of patient safety culture. Learning and continuous improvement, hospital management support, supervisor/manager expectations, feedback and communications about error, teamwork, hospital handoffs and transitions were found to be major patient safety culture predictors. Investing in practices and systems that focus on improving these aspects is likely to enhance the culture of patient safety in Omani hospitals and others like them. Strategies to nurture patient safety culture in Omani hospitals should focus upon building leadership capacity that support open communication, blame free, team work and continuous organizational learning. © 2014 International
-
Amcoff, Patric; Benigni, Romualdo; Blackburn, Karen; Carney, Edward; Cronin, Mark; Deluyker, Hubert; Gautier, Francoise; Judson, Richard S.; Kass, Georges E.N.; Keller, Detlef; Knight, Derek; Lilienblum, Werner; Mahony, Catherine; Rusyn, Ivan; Schultz, Terry; Schwarz, Michael; Schüürmann, Gerrit; White, Andrew; Burton, Julien; Lostia, Alfonso M.; Munn, Sharon; Worth, Andrew
2015-01-01
Background Safety assessment for repeated dose toxicity is one of the largest challenges in the process to replace animal testing. This is also one of the proof of concept ambitions of SEURAT-1, the largest ever European Union research initiative on alternative testing, co-funded by the European Commission and Cosmetics Europe. This review is based on the discussion and outcome of a workshop organized on initiative of the SEURAT-1 consortium joined by a group of international experts with complementary knowledge to further develop traditional read-across and include new approach data. Objectives The aim of the suggested strategy for chemical read-across is to show how a traditional read-across based on structural similarities between source and target substance can be strengthened with additional evidence from new approach data—for example, information from in vitro molecular screening, “-omics” assays and computational models—to reach regulatory acceptance. Methods We identified four read-across scenarios that cover typical human health assessment situations. For each such decision context, we suggested several chemical groups as examples to prove when read-across between group members is possible, considering both chemical and biological similarities. Conclusions We agreed to carry out the complete read-across exercise for at least one chemical category per read-across scenario in the context of SEURAT-1, and the results of this exercise will be completed and presented by the end of the research initiative in December 2015. Citation Berggren E, Amcoff P, Benigni R, Blackburn K, Carney E, Cronin M, Deluyker H, Gautier F, Judson RS, Kass GE, Keller D, Knight D, Lilienblum W, Mahony C, Rusyn I, Schultz T, Schwarz M, Schüürmann G, White A, Burton J, Lostia AM, Munn S, Worth A. 2015. Chemical safety assessment using read-across: assessing the use of novel testing methods to strengthen the evidence base for decision making. Environ Health Perspect 123:1232
-
Safety assessment of ultra-wideband antennas for microwave breast imaging.
De Santis, Valerio; Sill, Jeff M; Bourqui, Jeremie; Fear, Elise C
2012-04-01
This article deals with the safety assessment of several ultra-wideband (UWB) antenna designs for use in prototype microwave breast imaging systems. First, the performances of the antennas are validated by comparison of measured and simulated data collected for a simple test case. An efficient approach to estimating the specific energy absorption (SA) is introduced and validated. Next, SA produced by the UWB antennas inside more realistic breast models is computed. In particular, the power levels and pulse repetition periods adopted for the SA evaluation follow the measurement protocol employed by a tissue sensing adaptive radar (TSAR) prototype system. Results indicate that the SA for the antennas examined is below limits prescribed in standards for exposure of the general population; however, the difficulties inherent in applying such standards to UWB exposures are discussed. The results also suggest that effective tools for the rapid evaluation of new sensors have been developed. © 2011 Wiley Periodicals, Inc.
-
Are health professionals' perceptions of patient safety related to figures on safety incidents?
Martijn, Lucie; Harmsen, Mirjam; Gaal, Sander; Mettes, Dirk; van Dulmen, Simone; Wensing, Michel
2013-10-01
The study aims to explore whether health care professionals' perceptions of patient safety in their practice were associated with the number of patient safety incidents identified in patient records. Seventy primary care practices of general practice, general dental practice, midwifery practices and allied health care practices were used in the study. A retrospective audit of 50 patient records was performed to identify patient safety incidents in each of the practices and a survey among health professionals to identify their perceptions of patient safety. All health professions felt that 'communication breakdowns inside the practice' as well as 'communication breakdowns outside the practice' and 'reporting of patient safety concerns' were a threat to patient safety in their work setting. We found little association between the perceptions of health professionals and the number of safety incidents. The only item with a significant relation to a higher number of safety incidents referred to the perception of 'communication problems outside the practice' as a threat to patient safety. This study indicates that the assessment of professionals' perceptions may be complementary to observed safety incidents, but not linked to an objective measure of patient safety. © 2012 John Wiley & Sons Ltd.
-
Safety Issues with Hydrogen as a Vehicle Fuel
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cadwallader, Lee Charles; Herring, James Stephen
1999-10-01
This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less
-
Safety Issues with Hydrogen as a Vehicle Fuel
DOE Office of Scientific and Technical Information (OSTI.GOV)
L. C. Cadwallader; J. S. Herring
1999-09-01
This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less
-
Jenke, Dennis
2012-01-01
An emerging trend in the biotechnology industry is the utilization of plastic components in manufacturing systems for the production of an active pharmaceutical ingredient (API) or a finished drug product (FDP). If the API, the FDP, or any solution used to generate them (for example, process streams such as media, buffers, and the like) come in contact with a plastic at any time during the manufacturing process, there is the potential that substances leached from the plastic may accumulate in the API or FDP, affecting safety and/or efficacy. In this article the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the article outlines the safety assessment process for manufacturing systems, specifically addressing the topics of risk management and the role of compendial testing. Finally, the proper use of vendor-supplied extractables information is considered. Manufacturing suites used to produce biopharmaceuticals can include components that are made out of plastics. Thus it is possible that substances could leach out of the plastics and into manufacturing solutions, and it is further possible that such leachables could accumulate in the pharmaceutical product. In this article, the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the author proposes a process by which the impact on product safety of such leached substances can be assessed.
-
NASA Astrophysics Data System (ADS)
Moreira, Francisco; Silva, Nuno
2016-08-01
Safety systems require accident avoidance. This is covered by application standards, processes, techniques and tools that support the identification, analysis, elimination or reduction to an acceptable level of system risks and hazards. Ideally, a safety system should be free of hazards. However, both industry and academia have been struggling to ensure appropriate risk and hazard analysis, especially in what concerns completeness of the hazards, formalization, and timely analysis in order to influence the specifications and the implementation. Such analysis is also important when considering a change to an existing system. The Common Safety Method for Risk Evaluation and Assessment (CSM- RA) is a mandatory procedure whenever any significant change is proposed to the railway system in a European Member State. This paper provides insights on the fundamentals of CSM-RA based and complemented with Hazard Analysis. When and how to apply them, and the relation and similarities of these processes with industry standards and the system life cycles is highlighted. Finally, the paper shows how CSM-RA can be the basis of a change management process, guiding the identification and management of the hazards helping ensuring the similar safety level as the initial system. This paper will show how the CSM-RA principles can be used in other domains particularly for space system evolution.
-
Assessment of the culture of safety in public hospitals in Brazil.
Carvalho, Rhanna Emanuela Fontenele Lima de; Arruda, Lidyane Parente; Nascimento, Nayanne Karen Pinheiro do; Sampaio, Renata Lopes; Cavalcante, Maria Lígia Silva Nunes; Costa, Ana Carolina Pinto
2017-03-02
to assess the culture of safety in three public hospitals. transversal study undertaken in three Brazilian public hospitals, with health professionals through applying the Safety Attitudes Questionnaire (SAQ). Scores greater than or equal to 75 were considered positive. a total of 573 professionals participated in the study, including nurse technicians and auxiliary nurses 292 (51%), nurses 105 (18.3%), physicians 59 (10.3%), and other professionals 117 (20.4%). The mean of the SAQ varied between 65 and 69 in the three hospitals. Among the domains, however, 'Job satisfaction' presented a higher score, and the opposite was observed for the domain 'Perceptions of management'. The outsourced professionals presented a better perception of the culture of safety than did the statutory professionals. The professionals with higher education presented a better perception of the stressing factors than did the professionals educated to senior high school level. the level of the culture of safety found is below the ideal. The managerial actions are considered the main contributing factor to the culture's weakness; however, the professionals demonstrated themselves to be satisfied with the work. evaluar la cultura de seguridad en tres hospitales públicos. estudio transversal realizado en tres hospitales públicos brasileños, desarrollado con profesionales de la salud aplicando el Safety Attitudes Questionnaire (SAQ). Fueron considerados positivos puntajes mayores o iguales a 75. participaron del estudio 573 profesionales, incluyendo técnicos y auxiliares de enfermería 292 (51%), enfermeros 105 (18,3%), médicos 59 (10,3%), y otros profesionales 117 (20,4%). El promedio del SAQ varió entre 65 a 69 en los tres hospitales. Sin embargo, en los dominios, Satisfacción en el Trabajo presentó mayor puntaje y lo opuesto fue observado en el dominio Percepción de la Administración. Los profesionales tercerizados presentaron mejor percepción de la cultura de seguridad que los
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ivanova, T.; Laville, C.; Dyrda, J.
2012-07-01
The sensitivities of the k{sub eff} eigenvalue to neutron cross sections have become commonly used in similarity studies and as part of the validation algorithm for criticality safety assessments. To test calculations of the sensitivity coefficients, a benchmark study (Phase III) has been established by the OECD-NEA/WPNCS/EG UACSA (Expert Group on Uncertainty Analysis for Criticality Safety Assessment). This paper presents some sensitivity results generated by the benchmark participants using various computational tools based upon different computational methods: SCALE/TSUNAMI-3D and -1D, MONK, APOLLO2-MORET 5, DRAGON-SUSD3D and MMKKENO. The study demonstrates the performance of the tools. It also illustrates how model simplificationsmore » impact the sensitivity results and demonstrates the importance of 'implicit' (self-shielding) sensitivities. This work has been a useful step towards verification of the existing and developed sensitivity analysis methods. (authors)« less
-
Gyekye, Seth Ayim; Haybatollahi, Mohammad
2014-01-01
This study investigated the relationships between organizational justice, organizational safety climate, job satisfaction, safety compliance and accident frequency. Ghanaian industrial workers participated in the study (N = 320). Safety climate and justice perceptions were assessed with Hayes, Parender, Smecko, et al.'s (1998) and Blader and Tyler's (2003) scales respectively. A median split was performed to dichotomize participants into 2 categories: workers with positive and workers with negative justice perceptions. Confirmatory factors analysis confirmed the 5-factor structure of the safety scale. Regression analyses and t tests indicated that workers with positive fairness perceptions had constructive perspectives regarding workplace safety, expressed greater job satisfaction, were more compliant with safety policies and registered lower accident rates. These findings provide evidence that the perceived level of fairness in an organization is closely associated with workplace safety perception and other organizational factors which are important for safety. The implications for safety research are discussed.
-
Arnardottir, Arna H; Haaijer-Ruskamp, Flora M; Straus, Sabine M J; de Graeff, Pieter A; Mol, Peter G M
2011-11-01
Knowledge on the safety of new medicines is limited at the time of market entry. Nearly half of all drugs used to treat HIV registered in the EU required ≥1 Direct Healthcare Professional Communication (DHPC) in the past 10 years for safety issues identified post-approval. The aim was to evaluate the extent to which regulators and industry have addressed the risk of safety issues for HIV drugs based on prior experience with other drugs in the same class and whether doing so impacts development time of these drugs. HIV drugs receiving ≥1 DHPC in the Netherlands between January 1999 and December 2008 were identified. Each drug with a DHPC ('index' drug) was paired with subsequently approved HIV drug(s) in the same class (Anatomical Therapeutic Chemical [ATC] 4th level) ['follow-on' drugs]. Characteristics of safety issues were extracted from the DHPCs of the 'index' drugs. European Public Assessment Reports (EPARs) were reviewed regarding whether the safety issues had been considered during development and approval. Consideration of previously identified safety issues in 'follow-on' drug applications was assessed regarding attention paid to adverse drug reaction (ADR) symptoms in pre-marketing studies, Summary of Product Characteristics (SmPC) and postmarketing commitments, and whether size of the safety population was in accordance with Regulatory guidelines. 'Index' drugs were also paired with drugs in the same class already on the market ('older' drugs). For 'older' drugs, we identified whether the safety issue led to appropriate changes in the current SmPC (January 2011) compared with the SmPC at the time of marketing authorization. Clinical development time was assessed using time from first patent application to market authorization as proxy, and comparison was made between 'index' and 'follow-on' drugs. For 9 (43%) of the 21 centrally authorized HIV drugs, 11 serious safety issues that required a DHPC were identified. Two drugs were excluded from our
-
Wu, Jun; Li, Chengbing; Huo, Yueying
2014-01-01
Safety of dangerous goods transport is directly related to the operation safety of dangerous goods transport enterprise. Aiming at the problem of the high accident rate and large harm in dangerous goods logistics transportation, this paper took the group decision making problem based on integration and coordination thought into a multiagent multiobjective group decision making problem; a secondary decision model was established and applied to the safety assessment of dangerous goods transport enterprise. First of all, we used dynamic multivalue background and entropy theory building the first level multiobjective decision model. Secondly, experts were to empower according to the principle of clustering analysis, and combining with the relative entropy theory to establish a secondary rally optimization model based on relative entropy in group decision making, and discuss the solution of the model. Then, after investigation and analysis, we establish the dangerous goods transport enterprise safety evaluation index system. Finally, case analysis to five dangerous goods transport enterprises in the Inner Mongolia Autonomous Region validates the feasibility and effectiveness of this model for dangerous goods transport enterprise recognition, which provides vital decision making basis for recognizing the dangerous goods transport enterprises. PMID:25477954
-
Wu, Jun; Li, Chengbing; Huo, Yueying
2014-01-01
Safety of dangerous goods transport is directly related to the operation safety of dangerous goods transport enterprise. Aiming at the problem of the high accident rate and large harm in dangerous goods logistics transportation, this paper took the group decision making problem based on integration and coordination thought into a multiagent multiobjective group decision making problem; a secondary decision model was established and applied to the safety assessment of dangerous goods transport enterprise. First of all, we used dynamic multivalue background and entropy theory building the first level multiobjective decision model. Secondly, experts were to empower according to the principle of clustering analysis, and combining with the relative entropy theory to establish a secondary rally optimization model based on relative entropy in group decision making, and discuss the solution of the model. Then, after investigation and analysis, we establish the dangerous goods transport enterprise safety evaluation index system. Finally, case analysis to five dangerous goods transport enterprises in the Inner Mongolia Autonomous Region validates the feasibility and effectiveness of this model for dangerous goods transport enterprise recognition, which provides vital decision making basis for recognizing the dangerous goods transport enterprises.
-
University building safety index measurement using risk and implementation matrix
NASA Astrophysics Data System (ADS)
Rahman, A.; Arumsari, F.; Maryani, A.
2018-04-01
Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.
-
2013-01-01
Background Venous thromboembolism (VTE) is a major cause of morbidity and mortality in hospitalised patients. VTE prevention has been identified as a major health need internationally to improve patient safety. A National Institute for Health and Clinical Excellence (NICE) guideline was issued in February 2010. Its key priorities were to assess patients for risk of VTE on admission to hospital, assess patients for bleeding risk and evaluate the risks and benefits of prescribing VTE prophylaxis. The aim of this study was to evaluate the implementation of NICE guidance and its impact on patient safety. Methods A before-after observational design was used to investigate changes in VTE risk assessment documentation and inappropriate prescribing of prophylaxis between the year prior to (2009) and the year following (2010) the implementation of NICE guidance, using data from a 3-week period during each year. A total of 408 patients were sampled in each year across four hospitals in the NHS South region. Results Implementation strategies such as audit, education and training were used. The percentage of patients for whom a VTE risk assessment was documented increased from 51.5% (210/408) in 2009 to 79.2% (323/408) in 2010; difference 27.7% (95% CI: 21.4% to 33.9%; p < 0.001). There was little evidence of change in the percentage who were prescribed prophylaxis amongst patients without a risk assessment (71.7% (142/198) in 2009 and 68.2% (58/85) in 2010; difference −3.5% (95% CI: -15.2% to 8.2%; p =0.56) nor the percentage who were prescribed low molecular weight heparin amongst patients with a contraindication (14% (4/28) in 2009 and 15% (6/41) in 2010; RD = 0.3% (95% CI: -16.5% to 17.2%; p =0.97). Conclusions The documentation of risk assessment improved following the implementation of NICE guidance; it is questionable, however, whether this led to improved patient safety with respect to prescribing appropriate prophylaxis. PMID:23734903
-
Slater, Beverley L; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John
2012-01-01
Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based training program that embeds patient safety within quality improvement methods. Kirkpatrick's "levels of evaluation" model was adopted to evaluate the program in health organizations across one city in the north of England. Questionnaires were used to assess reaction of participants to the program (Level 1). Improvements in patient safety knowledge and patient safety culture (Level 2) were assessed using a 12-item multiple-choice questionnaire and a culture questionnaire. Interviews and project-specific quantitative measurements were used to assess changes in professional practice and patient outcomes (Levels 3 and 4). All aspects of the program were positively received by participants. Few participants completed the MCQ at both time points, but those who did showed improvement in knowledge. There were some small but significant improvements in patient safety culture. Interviews revealed a number of additional benefits beyond the specific problems addressed. Most importantly, 8 of the 11 teams showed improvements in patient safety practices and/or outcomes. This program is an example of interprofessional education in practice and demonstrates that team-based learning using quality improvement methods is feasible and can be effective in improving patient safety, but requires time and space for participants. Alignment with continuing education arrangements could support mainstream adoption of this approach within organizations. Copyright © 2012 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.
-
Shen, Minxue; Hu, Ming; Sun, Zhenqiu
2015-01-01
Few studies on nutrition and food safety education intervention for students in remote areas of China were reported. The study aimed to assess the questionnaire used to measure the knowledge, attitude and behavior with respect to nutrition and food safety, and to evaluate the effectiveness of a quasi-experimental nutrition and food safety education intervention among primary school students in poverty-stricken counties of west China. Twelve primary schools in west China were randomly selected from Zhen'an of Shaanxi province and Huize of Yunnan province. Six geographically dispersed schools were assigned to the intervention group in a nonrandom way. Knowledge, attitude and behavior questionnaire was developed, assessed, and used for outcome measurement. Students were investigated at baseline and the end of the study respectively without follow-up. Students in intervention group received targeted nutrition and food safety lectures 0.5 hour per week for two semesters. Item response theory was applied for assessment of questionnaire, and a two-level difference-in-differences model was applied to assess the effectiveness of the intervention. The Cronbach's alpha of the original questionnaire was 0.84. According to item response model, 22 knowledge items, 6 attitude items and 8 behavior items showed adequate discrimination parameter and were retained. 378 and 478 valid questionnaires were collected at baseline and the end point. Differences of demographic characteristics were statistically insignificant between the two groups. Two-level difference-in-differences models showed that health education improved 2.92 (95% CI: 2.06-3.78) and 2.92 (95% CI: 1.37-4.47) in knowledge and behavior scores respectively, but had no effect on attitude. The questionnaire met the psychometric standards and showed good internal consistence and discrimination power. The nutrition and food safety education was effective in improving the knowledge and behavior of primary school students in
-
Geriatric Cyclists: Assessing Risks, Safety, and Benefits
Ikpeze, Tochukwu C.; Glaun, Gabriel; McCalla, Daren
2018-01-01
Nearly 1 in every 3 Americans ride bicycles each year, but only 20% of the reported 100 million cyclists ride on a weekly basis. Bicycling is a common form of transportation and recreation and has gained popularity among the elderly patients. In recent years, the number of elderly cyclists has increased steadily and studies have cited ease of use, need for exercise, and enjoyment as important contributing factors. The benefits of physical activity on health is well-documented, and elderly individuals are encouraged to remain active to reduce the progression of age-related weakness and loss of muscle mass. Safety concerns, however, have been a prevalent public health issue. According to the Center for Disease Control and Prevention, elderly and teenage cyclists account for the highest number of head injuries and fatalities among all cyclists. Safety measures that include wearing protective gear such as helmets and choosing the appropriate bicycle have been recommended to minimize the risk of sustaining injuries while riding. Despite these concerns, bicycling has remained a popular and exciting activity for the elderly patients. PMID:29383267
-
A literature review of safety culture.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cole, Kerstan Suzanne; Stevens-Adams, Susan Marie; Wenner, Caren A.
2013-03-01
Workplace safety has been historically neglected by organizations in order to enhance profitability. Over the past 30 years, safety concerns and attention to safety have increased due to a series of disastrous events occurring across many different industries (e.g., Chernobyl, Upper Big-Branch Mine, Davis-Besse etc.). Many organizations have focused on promoting a healthy safety culture as a way to understand past incidents, and to prevent future disasters. There is an extensive academic literature devoted to safety culture, and the Department of Energy has also published a significant number of documents related to safety culture. The purpose of the current endeavormore » was to conduct a review of the safety culture literature in order to understand definitions, methodologies, models, and successful interventions for improving safety culture. After reviewing the literature, we observed four emerging themes. First, it was apparent that although safety culture is a valuable construct, it has some inherent weaknesses. For example, there is no common definition of safety culture and no standard way for assessing the construct. Second, it is apparent that researchers know how to measure particular components of safety culture, with specific focus on individual and organizational factors. Such existing methodologies can be leveraged for future assessments. Third, based on the published literature, the relationship between safety culture and performance is tenuous at best. There are few empirical studies that examine the relationship between safety culture and safety performance metrics. Further, most of these studies do not include a description of the implementation of interventions to improve safety culture, or do not measure the effect of these interventions on safety culture or performance. Fourth, safety culture is best viewed as a dynamic, multi-faceted overall system composed of individual, engineered and organizational models. By addressing all three
-
IMPLEMENTATION OF DEFENSE NUCLEAR FACILITY SAFETY BOARD RECOMMENDATION 2000-2 AT WIPP
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jackson, K.; Wu, C.
2002-02-26
The Defense Nuclear Safeties Board (DNFSB) issued Recommendation 2000-2 on March 8, 2000, concerning the degrading conditions of vital safety systems, or systems important to nuclear safety, at DOE sites across the nation. The Board recommended that the DOE take action to assess the condition of its nuclear systems to ensure continued operational readiness of vital safety systems that are important for safely accomplishing the DOE's mission. To verify the readiness of vital safety systems, a two-phased approach was established. Phase I consisted of a qualitative assessment to approved criteria of the defined vital safety systems by operating contractor personnel,more » overseen by Federal field office personnel. Based on Phase I Assessment results, vital safety systems with significant deficiencies would be further assessed in Phase II, a more extensive quantitative assessment, by a contractor and Federal team, using a second set of criteria. In addition, Defense Nuclear Facility Safety Board Recommendation 2000-2 concluded that the degradation of confinement ventilation systems was of major concern, and issued a separate set of criteria to perform a Phase II Assessment on confinement ventilation systems.« less
-
Promoting a Culture of Safety as a Patient Safety Strategy
Weaver, Sallie J.; Lubomksi, Lisa H.; Wilson, Renee F.; Pfoh, Elizabeth R.; Martinez, Kathryn A.; Dy, Sydney M.
2015-01-01
Developing a culture of safety is a core element of many efforts to improve patient safety and care quality. This systematic review identifies and assesses interventions used to promote safety culture or climate in acute care settings. The authors searched MEDLINE, CINAHL, PsycINFO, Cochrane, and EMBASE to identify relevant English-language studies published from January 2000 to October 2012. They selected studies that targeted health care workers practicing in inpatient settings and included data about change in patient safety culture or climate after a targeted intervention. Two raters independently screened 3679 abstracts (which yielded 33 eligible studies in 35 articles), extracted study data, and rated study quality and strength of evidence. Eight studies included executive walk rounds or interdisciplinary rounds; 8 evaluated multicomponent, unit-based interventions; and 20 included team training or communication initiatives. Twenty-nine studies reported some improvement in safety culture or patient outcomes, but measured outcomes were highly heterogeneous. Strength of evidence was low, and most studies were pre–post evaluations of low to moderate quality. Within these limits, evidence suggests that interventions can improve perceptions of safety culture and potentially reduce patient harm. PMID:23460092
-
Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M
2015-09-01
There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care.
-
NASA Astrophysics Data System (ADS)
Sakurai, A.; Bisri, M. B. F.; Oda, T.; Oktari, R. S.; Murayama, Y.
2017-02-01
The study assessed the depth of school disaster safety at public elementary schools in Banda Aceh City, Indonesia in terms of comprehensive school safety, especially school location, disaster management and disaster education. The findings indicate that 56% of public elementary schools in Banda Aceh City are exposed to high tsunami risk, and most externally driven school disaster preparedness activities were not continued by the schools due to lack of ownership and funding. To realize comprehensive school safety, disaster preparedness programs should neither be brought in by external donors, nor be in a patchwork. Rather, it should be conducted jointly and sustainably by the local school and the community and supported by multi-sectoral support in the city. Comprehensive school safety of public elementary schools in Banda Aceh City could be realized by reviewing, updating and localizing school disaster preparedness programs by all the education partners in the city with strong political will and commitment.
-
Patient safety goals for the proposed Federal Health Information Technology Safety Center.
Sittig, Dean F; Classen, David C; Singh, Hardeep
2015-03-01
The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
-
CloudSat Safety Operations at Vandenberg AFB
NASA Technical Reports Server (NTRS)
Greenberg, Steve
2006-01-01
CloudSat safety operations at Vendenberg AFB is given. The topics include: 1) CloudSat Project Overview; 2) Vandenberg Ground Operations; 3) Delta II Launch Vehicle; 4) The A-Train; 5) System Safety Management; 6) CALIPSO Hazards Assessment; 7) CALIPSO Supplemental Safeguards; 8) Joint System Safety Operations; 9) Extended Stand-down; 10) Launch Delay Safety Concerns; and 11) Lessons Learned.
-
Daud-Gallotti, Renata Mahfuz; Morinaga, Christian Valle; Arlindo-Rodrigues, Marcelo; Velasco, Irineu Tadeu; Arruda Martins, Milton; Tiberio, Iolanda Calvo
2011-01-01
INTRODUCTION: Patient safety is seldom assessed using objective evaluations during undergraduate medical education. OBJECTIVE: To evaluate the performance of fifth-year medical students using an objective structured clinical examination focused on patient safety after implementation of an interactive program based on adverse events recognition and disclosure. METHODS: In 2007, a patient safety program was implemented in the internal medicine clerkship of our hospital. The program focused on human error theory, epidemiology of incidents, adverse events, and disclosure. Upon completion of the program, students completed an objective structured clinical examination with five stations and standardized patients. One station focused on patient safety issues, including medical error recognition/disclosure, the patient-physician relationship and humanism issues. A standardized checklist was completed by each standardized patient to assess the performance of each student. The student's global performance at each station and performance in the domains of medical error, the patient-physician relationship and humanism were determined. The correlations between the student performances in these three domains were calculated. RESULTS: A total of 95 students participated in the objective structured clinical examination. The mean global score at the patient safety station was 87.59±1.24 points. Students' performance in the medical error domain was significantly lower than their performance on patient-physician relationship and humanistic issues. Less than 60% of students (n = 54) offered the simulated patient an apology after a medical error occurred. A significant correlation was found between scores obtained in the medical error domains and scores related to both the patient-physician relationship and humanistic domains. CONCLUSIONS: An objective structured clinical examination is a useful tool to evaluate patient safety competencies during the medical student clerkship
-
Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)
NASA Technical Reports Server (NTRS)
Duarte, Alberto
2007-01-01
Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a
-
How EPA Assesses Chemical Safety
EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.
-
Passey, Chaitali; Suryawanshi, Satyendra; Sanghavi, Kinjal; Gupta, Manish
2018-02-26
The rapidly increasing number of therapeutic biologics in development has led to a growing recognition of the need for improvements in immunogenicity assessment. Published data are often inadequate to assess the impact of an antidrug antibody (ADA) on pharmacokinetics, safety, and efficacy, and enable a fully informed decision about patient management in the event of ADA development. The recent introduction of detailed regulatory guidance for industry should help address many past inadequacies in immunogenicity assessment. Nonetheless, careful analysis of gathered data and clear reporting of results are critical to a full understanding of the clinical relevance of ADAs, but have not been widely considered in published literature to date. Here, we review visualization and modeling of immunogenicity data. We present several relatively simple visualization techniques that can provide preliminary information about the kinetics and magnitude of ADA responses, and their impact on pharmacokinetics and clinical endpoints for a given therapeutic protein. We focus on individual sample- and patient-level data, which can be used to build a picture of any trends, thereby guiding analysis of the overall study population. We also discuss methods for modeling ADA data to investigate the impact of immunogenicity on pharmacokinetics, efficacy, and safety.
-
Railroad safety : U.S.-Canadian comparison
DOT National Transportation Integrated Search
1979-08-01
In June 1978, Congress requested the Office of Technology Assessment (OTA) to : conduct "a detailed comparison between conditions prevailing in railway safety : in the United States and a review of safety operations in Canada. " Responding : to this ...
-
Assessment of zero gravity effects on space worker health and safety
NASA Technical Reports Server (NTRS)
1980-01-01
One objective of the study is to assess the effects of all currently known deviations from normal of medical, physiological, and biochemical parameters which appear to be due to zero gravity (zero-g) environment and to acceleration and deceleration to be experienced, as outlined in the references Solar Power Satellites (SPS) design, by space worker. Study results include identification of possible health or safety effects on space workers either immediate or delayed due to the zero gravity environment and acceleration and deceleration; estimation of the probability that an individual will be adversely affected; description of the possible consequence to work efficiency in persons adversely affected; and description of the possible/probable consequences to immediate and future health of individuals exposed to this environment. A research plan, which addresses the uncertainties in current knowledge regarding the health and safety hazards to exposed SPS space workers, is presented. Although most adverse affects experienced during space flight soon disappeared upon return to the Earth's environment, there remains a definite concern for the long-term effects to SPS space workers who might spend as much as half their time in space during a possible five year career period. The proposed 90 day up/90 day down cycle, coupled with the fact that most of the effects of weightlessness may persist throughout the flight along with the realization that recovery may occupy much of the terrestrial stay, may keep the SPS workers in a deviant physical condition or state of flux for 60 to 100% of their five year career.
-
Incorporating organisational safety culture within ergonomics practice.
Bentley, Tim; Tappin, David
2010-10-01
This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.
-
Zenere, Alessandra; Zanolin, M Elisabetta; Negri, Roberta; Moretti, Francesca; Grassi, Mario; Tardivo, Stefano
2016-04-01
Neonatal intensive care units (NICUs) are a high-risk setting. The Safety Attitude Questionnaire (SAQ) is a widely used tool to measure safety culture. The aims of the study are to verify the psychometric properties of the Italian version of SAQ, to evaluate safety culture in the NICUs and to identify improvement interventions. A cross-sectional study was conducted in 6 level III NICUs. The SAQ was translated into Italian and adapted to the context, a confirmatory factor analysis (CFA) was performed to validate the questionnaire. 193 questionnaires were collected. The mean response rate was 59.7% (range 44.5%-95.7%). The answers were analysed according to six factors: f1 - teamwork climate, f2 - safety climate, f3 - job satisfaction, f4 - stress recognition, f5 - perception of management, f6 - working conditions. The CFA indexes were adequate (McDonald's omega indexes varied from 0.74 to 0.94, the SRMR index was equal to 0.79 and the RMSEA index was 0.070, 95% CI = 0.063-0.078). The mean composite score was 57.6 (SD 17.9), ranging between 42.3 and 69.7 on a standardized 100-point scale. We highlighted significant differences among units and professions (P < 0.05). The Italian version of the SAQ proved to be an effective tool to evaluate and compare the safety culture in the NICUs. The obtained scores significantly varied both within and among the NICUs. The organizational and structural characteristics of the involved hospitals probably affect the safety culture perception by the staff. © 2015 John Wiley & Sons, Ltd.
-
NASA Technical Reports Server (NTRS)
Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Feather, Martin; Rutledge, Peter; Sen, Dev; Youngblood, Robert
2015-01-01
This is the second of two volumes that collectively comprise the NASA System Safety Handbook. Volume 1 (NASASP-210-580) was prepared for the purpose of presenting the overall framework for System Safety and for providing the general concepts needed to implement the framework. Volume 2 provides guidance for implementing these concepts as an integral part of systems engineering and risk management. This guidance addresses the following functional areas: 1.The development of objectives that collectively define adequate safety for a system, and the safety requirements derived from these objectives that are levied on the system. 2.The conduct of system safety activities, performed to meet the safety requirements, with specific emphasis on the conduct of integrated safety analysis (ISA) as a fundamental means by which systems engineering and risk management decisions are risk-informed. 3.The development of a risk-informed safety case (RISC) at major milestone reviews to argue that the systems safety objectives are satisfied (and therefore that the system is adequately safe). 4.The evaluation of the RISC (including supporting evidence) using a defined set of evaluation criteria, to assess the veracity of the claims made therein in order to support risk acceptance decisions.
-
Liau, Kai Ming; Lee, Yeong Yeh; Chen, Chee Keong; Rasool, Aida Hanum G
2011-01-01
Introduction. This is an open-label pilot study on four weeks of virgin coconut oil (VCO) to investigate its efficacy in weight reduction and its safety of use in 20 obese but healthy Malay volunteers. Methodology. Efficacy was assessed by measuring weight and associated anthropometric parameters and lipid profile one week before and one week after VCO intake. Safety was assessed by comparing organ function tests one week before and one week after intake of VCO. Paired t-test was used to analyse any differences in all the measurable variables. Results. Only waist circumference (WC) was significantly reduced with a mean reduction of 2.86 cm or 0.97% from initial measurement (P = .02). WC reduction was only seen in males (P < .05). There was no change in the lipid profile. There was a small reduction in creatinine and alanine transferase levels. Conclusion. VCO is efficacious for WC reduction especially in males and it is safe for use in humans.
-
Liau, Kai Ming; Lee, Yeong Yeh; Chen, Chee Keong; Rasool, Aida Hanum G.
2011-01-01
Introduction. This is an open-label pilot study on four weeks of virgin coconut oil (VCO) to investigate its efficacy in weight reduction and its safety of use in 20 obese but healthy Malay volunteers. Methodology. Efficacy was assessed by measuring weight and associated anthropometric parameters and lipid profile one week before and one week after VCO intake. Safety was assessed by comparing organ function tests one week before and one week after intake of VCO. Paired t-test was used to analyse any differences in all the measurable variables. Results. Only waist circumference (WC) was significantly reduced with a mean reduction of 2.86 cm or 0.97% from initial measurement (P = .02). WC reduction was only seen in males (P < .05). There was no change in the lipid profile. There was a small reduction in creatinine and alanine transferase levels. Conclusion. VCO is efficacious for WC reduction especially in males and it is safe for use in humans. PMID:22164340
-
Brennan, Frank R; Cavagnaro, Joy; McKeever, Kathleen; Ryan, Patricia C; Schutten, Melissa M; Vahle, John; Weinbauer, Gerhard F; Marrer-Berger, Estelle; Black, Lauren E
2018-01-01
Monoclonal antibodies (mAbs) are improving the quality of life for patients suffering from serious diseases due to their high specificity for their target and low potential for off-target toxicity. The toxicity of mAbs is primarily driven by their pharmacological activity, and therefore safety testing of these drugs prior to clinical testing is performed in species in which the mAb binds and engages the target to a similar extent to that anticipated in humans. For highly human-specific mAbs, this testing often requires the use of non-human primates (NHPs) as relevant species. It has been argued that the value of these NHP studies is limited because most of the adverse events can be predicted from the knowledge of the target, data from transgenic rodents or target-deficient humans, and other sources. However, many of the mAbs currently in development target novel pathways and may comprise novel scaffolds with multi-functional domains; hence, the pharmacological effects and potential safety risks are less predictable. Here, we present a total of 18 case studies, including some of these novel mAbs, with the aim of interrogating the value of NHP safety studies in human risk assessment. These studies have identified mAb candidate molecules and pharmacological pathways with severe safety risks, leading to candidate or target program termination, as well as highlighting that some pathways with theoretical safety concerns are amenable to safe modulation by mAbs. NHP studies have also informed the rational design of safer drug candidates suitable for human testing and informed human clinical trial design (route, dose and regimen, patient inclusion and exclusion criteria and safety monitoring), further protecting the safety of clinical trial participants.
-
Assessing flight safety differences between the United States regional and major airlines
NASA Astrophysics Data System (ADS)
Sharp, Broderick H.
During 2008, the U.S. domestic airline departures exceeded 28,000 flights per day. Thirty-nine or less than 0.2 of 1% of these flights resulted in operational incidents or accidents. However, even a low percentage of airline accidents and incidents continue to cause human suffering and property loss. The charge of this study was the comparison of U.S. major and regional airline safety histories. The study spans safety events from January 1982 through December 2008. In this quantitative analysis, domestic major and regional airlines were statistically tested for their flight safety differences. Four major airlines and thirty-seven regional airlines qualified for the safety study which compared the airline groups' fatal accidents, incidents, non-fatal accidents, pilot errors, and the remaining six safety event probable cause types. The six other probable cause types are mechanical failure, weather, air traffic control, maintenance, other, and unknown causes. The National Transportation Safety Board investigated each airline safety event, and assigned a probable cause to each event. A sample of 500 events was randomly selected from the 1,391 airlines' accident and incident population. The airline groups' safety event probabilities were estimated using the least squares linear regression. A probability significance level of 5% was chosen to conclude the appropriate research question hypothesis. The airline fatal accidents and incidents probability levels were 1.2% and 0.05% respectively. These two research questions did not reach the 5% significance level threshold. Therefore, the airline groups' fatal accidents and non-destructive incidents probabilities favored the airline groups' safety differences hypothesis. The linear progression estimates for the remaining three research questions were 71.5% for non-fatal accidents, 21.8% for the pilot errors, and 7.4% significance level for the six probable causes. These research questions' linear regressions are greater than
-
Safety Education Handbook. Volume 2.
ERIC Educational Resources Information Center
Kansas State Dept. of Education, Topeka.
This is the second of three volumes of a safety guide developed to assist Kansas administrators and teachers in organizing, evaluating, and maintaining safety programs. It provides information to help them identify, assess, and correct unsafe conditions relating to equipment and facilities and ensure a safe and healthy environment for themselves…
-
Safety Education Handbook. Volume 3.
ERIC Educational Resources Information Center
Kansas State Dept. of Education, Topeka.
This is the third of three volumes of a safety guide developed to assist Kansas administrators and teachers in organizing, evaluating, and maintaining safety programs. It provides information to help them identify, assess, and correct unsafe conditions relating to equipment and facilities and ensure a safe and healthy environment for themselves…
-
Ayres, J G; Frost, C D; Holmes, W F; Williams, D R R; Ward, S M
1998-01-01
Objective To evaluate the safety of a non-chlorofluorocarbon metered dose salbutamol inhaler. Design This was a postmarketing surveillance study, conducted under formal guidelines for company sponsored safety assessment of marketed medicines (SAMM). A non-randomised, non-interventional, observational design compared patients prescribed metered doses of salbutamol delivered by inhalers using either hydrofluoroalkane or chlorofluorocarbon as the propellant. Follow up was three months. Setting 646 general practices throughout the United Kingdom. Subjects 6614 patients with obstructive airways disease (1667 patient years of exposure). Main outcome measures Proportions of patients who were: admitted to hospital for respiratory diseases, reported adverse side effects, or withdrew because of adverse affects. Results There were no significant differences between the hydrofluoroalkane (HFA 134a) and chlorofluorocarbon inhaler groups in relation to the proportions of patients admitted to hospital for respiratory diseases (odds ratio 0.75; 95% confidence interval 0.51 to 1.08) or the proportions who reported adverse events (1.01; 0.88 to 1.17). However, more patients using the hydrofluoroalkane inhaler than the chlorofluorocarbon inhaler withdrew because of adverse events (3.8% and 0.9% respectively). Conclusion The hydrofluoroalkane inhaler was as safe as the chlorofluorocarbon inhaler when judged by hospital admissions and adverse affects. The study design successfully fulfilled the recommendations of the guidelines. Differences between postmarketing surveillance studies and randomised clinical trials in assessing safety were identified. These may lead to difficulties in the design of postmarketing surveillance studies. Key messagesCredibility of postmarketing surveillance studies is expected to increase after the introduction of guidelines covering their conduct The study design successfully fulfilled the requirements of these guidelines in terms of the number, rate, and
-
Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi
2007-01-01
The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.
-
Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M
2015-01-01
ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832
-
Ball, Robert; Horne, Dale; Izurieta, Hector; Sutherland, Andrea; Walderhaug, Mark; Hsu, Henry
2011-05-01
The public health community faces increasing demands for improving vaccine safety while simultaneously increasing the number of vaccines available to prevent infectious diseases. The passage of the US Food and Drug Administration (FDA) Amendment Act of 2007 formalized the concept of life-cycle management of the risks and benefits of vaccines, from early clinical development through many years of use in large numbers of people. Harnessing scientific and technologic advances is necessary to improve vaccine-safety evaluation. The Office of Biostatistics and Epidemiology in the Center for Biologics Evaluation and Research is working to improve the FDA's ability to monitor vaccine safety by improving statistical, epidemiologic, and risk-assessment methods, gaining access to new sources of data, and exploring the use of genomics data. In this article we describe the current approaches, new resources, and future directions that the FDA is taking to improve the evaluation of vaccine safety.
-
Nursing physical assessment for patient safety in general wards: reaching consensus on core skills.
Douglas, Clint; Booker, Catriona; Fox, Robyn; Windsor, Carol; Osborne, Sonya; Gardner, Glenn
2016-07-01
To determine consensus across acute care specialty areas on core physical assessment skills necessary for early recognition of changes in patient status in general wards. Current approaches to physical assessment are inconsistent and have not evolved to meet increased patient and system demands. New models of nursing assessment are needed in general wards that ensure a proactive and patient safety approach. A modified Delphi study. Focus group interviews with 150 acute care registered nurses at a large tertiary referral hospital generated a framework of core skills that were developed into a web-based survey. We then sought consensus with a panel of 35 senior acute care registered nurses following a classical Delphi approach over three rounds. Consensus was predefined as at least 80% agreement for each skill across specialty areas. Content analysis of focus group transcripts identified 40 discrete core physical assessment skills. In the Delphi rounds, 16 of these were consensus validated as core skills and were conceptually aligned with the primary survey: (Airway) Assess airway patency; (Breathing) Measure respiratory rate, Evaluate work of breathing, Measure oxygen saturation; (Circulation) Palpate pulse rate and rhythm, Measure blood pressure by auscultation, Assess urine output; (Disability) Assess level of consciousness, Evaluate speech, Assess for pain; (Exposure) Measure body temperature, Inspect skin integrity, Inspect and palpate skin for signs of pressure injury, Observe any wounds, dressings, drains and invasive lines, Observe ability to transfer and mobilise, Assess bowel movements. Among a large and diverse group of experienced acute care registered nurses consensus was achieved on a structured core physical assessment to detect early changes in patient status. Although further research is needed to refine the model, clinical application should promote systematic assessment and clinical reasoning at the bedside. © 2016 John Wiley & Sons Ltd.
-
Stiehl, Emily; Forst, Linda
2018-05-01
Safety climate, employees' perceptions of work-related safety, 1 has been promoted as a leading indicator of workplace safety in construction. 2 , 3 While research has primarily examined internal organizational sources (e.g., manager attitudes, formal organizational policies) on these perceptions, external sources of information might be more relevant to construction workers in nontraditional jobs who work for a limited time and/or have limited interaction with other employees. This paper argues for the future development of a construed external safety image scale to measure employees' perceptions about how external groups view their organization's safety. 4 The construed external safety image would capture the external sources that nontraditional workers use to assess safety climate and will allow public health researchers to identify and change dangerous workplaces while more effectively communicating information about safe workplaces to workers. The public health relevance of safety climate and construed external safety image for monitoring and communicating safety to nontraditional workers require examination.
-
Olumide, A O; Owoaje, E T
2016-06-01
It is essential for drivers employed in the formal sector to have good knowledge of road safety in order to safeguard their lives and those of the staff they are employed to drive. The study was conducted to determine the effect of a road safety education intervention on road safety knowledge of drivers employed in the University of Ibadan, Nigeria. A quasi-experimental study of 98 intervention and 78 control drivers selected using a cluster sampling technique was conducted. The intervention comprised a two-day training on road safety and first aid. The drivers' knowledge of road safety was measured at baseline, immediately and 4-months post-intervention. Aggregate scores of road safety knowledge were computed giving minimum and maximum obtainable scores of 0 and 16 respectively. Change in mean scores over the three measurement periods was assessed using Repeated Measures Analysis of Variance (ANOVA). Independent t-test was used to compare the scores between intervention and control drivers at each of the assessment periods. Twenty-nine drivers did not complete the study (attrition rate = 16.5%). At baseline, mean road safety knowledge scores for the intervention and control drivers were 12.7±2.2 and 12.9± 2.3 (p = 0.510) respectively. Immediately and four months post intervention, the scores of the intervention drivers were 13.8±1.9 and 12.8±1.6; while scores for the controls were 13.3±2.0 and 13.2±1.8. Repeated measures ANOVA revealed that the increase in knowledge over the three assessment periods was not statistically significant. The intervention resulted in an initial increase in road safety knowledge of the intervention drivers. However, this was not sustained to the forth month post-intervention. This finding suggests periodic refresher trainings to sustain the knowledge acquired.
-
Safety culture assessment in petrochemical industry: a comparative study of two algerian plants.
Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai
2014-06-01
To elucidate the relationship between safety culture maturity and safety performance of a particular company. To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.
-
21 CFR 601.35 - Evaluation of safety.
Code of Federal Regulations, 2013 CFR
2013-04-01
... information, the following types of data: (A) Pharmacology data, (B) Toxicology data, (C) Clinical adverse event data, and (D) Radiation safety assessment. (2) The amount of new safety data required will depend... relevant to risk and will specify the amount and type of safety data that are appropriate for each category...
-
Leonard, Sarah; O'Donovan, Anita
Minimizing errors and improving patient safety has gained prominence worldwide in high-risk disciplines such as radiation therapy. Patient safety culture has been identified as an important factor in reducing the incidence of adverse events and improving patient safety in the health care setting. The aim of distributing the Hospital Survey on Patient Safety Culture (HSPSC) to radiation therapy departments worldwide was to assess the current status of safety culture, identify areas for improvement and areas that excel, examine factors that influence safety culture, and raise staff awareness. The safety culture in radiation therapy departments worldwide was evaluated by distributing the HSPSC. A total of 266 participants were recruited from radiation therapy departments and included radiation oncologists, radiation therapists, physicists, and dosimetrists. The positive percent scores for the 12 dimensions of the HSPSC varied from 50% to 79%. The highest composite score among the 12 dimensions was teamwork within units; the lowest composite score was handoffs and transitions. The results indicated that health care professionals in radiation therapy departments felt positively toward patient safety. The HSPSC was successfully applied to radiation therapy departments and provided valuable insight into areas of potential improvement such as teamwork across units, staffing, and handoffs and transitions. Managers and policy makers in radiation therapy may use this assessment tool for focused improvement efforts toward patient safety culture. Copyright © 2017 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.
-
Hammad, Tarek A; Neyarapally, George A; Pinheiro, Simone P; Iyasu, Solomon; Rochester, George; Dal Pan, Gerald
2013-01-01
Due to the sparse nature of serious drug-related adverse events (AEs), meta-analyses combining data from several randomized controlled trials (RCTs) to evaluate drug safety issues are increasingly being conducted and published, influencing clinical and regulatory decision making. Evaluation of meta-analyses involves the assessment of both the individual constituent trials and the approaches used to combine them. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) reporting framework is designed to enhance the reporting of systematic reviews and meta-analyses. However, PRISMA may not cover all critical elements useful in the evaluation of meta-analyses with a focus on drug safety particularly in the regulatory-public health setting. This work was conducted to (1) evaluate the adherence of a sample of published drug safety-focused meta-analyses to the PRISMA reporting framework, (2) identify gaps in this framework based on key aspects pertinent to drug safety, and (3) stimulate the development and validation of a more comprehensive reporting tool that incorporates elements unique to drug safety evaluation. We selected a sample of meta-analyses of RCTs based on review of abstracts from high-impact journals as well as top medical specialty journals between 2009 and 2011. We developed a preliminary reporting framework based on PRISMA with specific additional reporting elements critical for the evaluation of drug safety meta-analyses of RCTs. The reporting of pertinent elements in each meta-analysis was reviewed independently by two authors; discrepancies in the independent evaluations were resolved through discussions between the two authors. A total of 27 meta-analyses, 12 from highest impact journals, 13 from specialty medical journals, and 2 from Cochrane reviews, were identified and evaluated. The great majority (>85%) of PRISMA elements were addressed in more than half of the meta-analyses reviewed. However, the majority of meta
-
Systematic evaluation of non-animal test methods for skin sensitisation safety assessment.
Reisinger, Kerstin; Hoffmann, Sebastian; Alépée, Nathalie; Ashikaga, Takao; Barroso, Joao; Elcombe, Cliff; Gellatly, Nicola; Galbiati, Valentina; Gibbs, Susan; Groux, Hervé; Hibatallah, Jalila; Keller, Donald; Kern, Petra; Klaric, Martina; Kolle, Susanne; Kuehnl, Jochen; Lambrechts, Nathalie; Lindstedt, Malin; Millet, Marion; Martinozzi-Teissier, Silvia; Natsch, Andreas; Petersohn, Dirk; Pike, Ian; Sakaguchi, Hitoshi; Schepky, Andreas; Tailhardat, Magalie; Templier, Marie; van Vliet, Erwin; Maxwell, Gavin
2015-02-01
The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has defined a three-phase framework for the development of a non-animal testing strategy for skin sensitization potency prediction. The results of the first phase – systematic evaluation of 16 test methods – are presented here. This evaluation involved generation of data on a common set of ten substances in all methods and systematic collation of information including the level of standardisation, existing test data,potential for throughput, transferability and accessibility in cooperation with the test method developers.A workshop was held with the test method developers to review the outcome of this evaluation and to discuss the results. The evaluation informed the prioritisation of test methods for the next phase of the non-animal testing strategy development framework. Ultimately, the testing strategy – combined with bioavailability and skin metabolism data and exposure consideration – is envisaged to allow establishment of a data integration approach for skin sensitisation safety assessment of cosmetic ingredients.
-
Cheah, Hoay Yan; Kiew, Lik Voon; Lee, Hong Boon; Japundžić-Žigon, Nina; Vicent, Marίa J; Hoe, See Ziau; Chung, Lip Yong
2017-11-01
While nano-sized construct (NSC) use in medicine has grown significantly in recent years, reported unwanted side effects have raised safety concerns. However, the toxicity of NSCs to the cardiovascular system (CVS) and the relative merits of the associated evaluation methods have not been thoroughly studied. This review discusses the toxicological profiles of selected NSCs and provides an overview of the assessment methods, including in silico, in vitro, ex vivo and in vivo models and how they are related to CVS toxicity. We conclude the review by outlining the merits of telemetry coupled with spectral analysis, baroreceptor reflex sensitivity analysis and echocardiography as an appropriate integrated strategy for the assessment of the acute and chronic impact of NSCs on the CVS. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.
-
Advancing perinatal patient safety through application of safety science principles using health IT.
Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila
2017-12-19
The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated
-
Sabio Paz, Verónica; Panattieri, Néstor D; Cristina Godio, Farmacéutica; Ratto, María E; Arpí, Lucrecia; Dackiewicz, Nora
2015-10-01
Patient safety and quality of care has become a challenge for health systems. Health care is an increasingly complex and risky activity, as it represents a combination of human, technological and organizational processes. It is necessary, therefore, to take effective actions to reduce the adverse events and mitigate its impact. This glossary is a local adaptation of key terms and concepts from the international bibliographic sources. The aim is providing a common language for assessing patient safety processes and compare them.
-
DOT National Transportation Integrated Search
2016-07-01
To enable implementation of the American Association of State Highway Transportation (AASHTO) Highway Safety Manual using : SaftetyAnalyst (an AASHTOWare software product), the Arizona Department of Transportation (ADOT) studied the data assessment :...
-
Morgan, Sherry J; Couch, Jessica; Guzzie-Peck, Peggy; Keller, Douglas A; Kemper, Ray; Otieno, Monicah A; Schulingkamp, Robert J; Jones, Thomas W
2017-04-01
An Innovation and Quality (IQ) Consortium focus group conducted a cross-company survey to evaluate current practices and perceptions around the use of animal models of disease (AMDs) in nonclinical safety assessment of molecules in clinical development. The IQ Consortium group is an organization of pharmaceutical and biotechnology companies with the mission of advancing science and technology. The survey queried the utilization of AMDs during drug discovery in which drug candidates are evaluated in efficacy models and limited short-duration non-Good Laboratory Practices (GLP) toxicology testing and during drug development in which drug candidates are evaluated in GLP toxicology studies. The survey determined that the majority of companies used AMDs during drug discovery primarily as a means for proactively assessing potential nonclinical safety issues prior to the conduct of toxicology studies, followed closely by the use of AMDs to better understand toxicities associated with exaggerated pharmacology in traditional toxicology models or to derisk issues when the target is only expressed in the disease state. In contrast, the survey results indicated that the use of AMDs in development is infrequent, being used primarily to investigate nonclinical safety issues associated with targets expressed only in disease states and/or in response to requests from global regulatory authorities.
-
Safety Culture Assessment in Petrochemical Industry: A Comparative Study of Two Algerian Plants
Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai
2014-01-01
Background To elucidate the relationship between safety culture maturity and safety performance of a particular company. Methods To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. Results The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. Conclusion The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance. PMID:25180135
-
Ghanipoor Machiani, Sahar; Abbas, Montasir
2016-11-01
Drivers' indecisiveness in dilemma zones (DZ) could result in crash-prone situations at signalized intersections. DZ is to the area ahead of an intersection in which drivers encounter a dilemma regarding whether to stop or proceed through the intersection when the signal turns yellow. An improper decision to stop by the leading driver, combined with the following driver deciding to go, can result in a rear-end collision, unless the following driver recognizes a collision is imminent and adjusts his or her behavior at or shortly after the onset of yellow. Considering the significance of DZ-related crashes, a comprehensive safety measure is needed to characterize the level of safety at signalized intersections. In this study, a novel safety surrogate measure was developed utilizing real-time radar field data. This new measure, called safety surrogate histogram (SSH), captures the degree and frequency of DZ-related conflicts at each intersection approach. SSH includes detailed information regarding the possibility of crashes, because it is calculated based on the vehicles conflicts. An example illustrating the application of the new methodology at two study sites in Virginia is presented and discussed, and a comparison is provided between SSH and other DZ-related safety surrogate measures mentioned in the literature. The results of the study reveal the efficacy of the SSH as complementary to existing surrogate measures. Copyright © 2015 Elsevier Ltd. All rights reserved.
-
Searson, D J; Anderson, R W G; Hutchinson, T P
2014-02-01
Pedestrian impact testing is used to provide information to the public about the relative level of protection provided by different vehicles to a struck pedestrian. Autonomous Emergency Braking (AEB) is a relatively new technology that aims to reduce the impact speed of such crashes. It is expected that vehicles with AEB will pose less harm to pedestrians, and that the benefit will come about through reductions in the number of collisions and a change in the severity of impacts that will still occur. In this paper, an integration of the assessment of AEB performance and impact performance is proposed based on average injury risk. Average injury risk is calculated using the result of an impact test and a previously published distribution of real world crash speeds. A second published speed distribution is used that accounts for the effects of AEB, and reduced average risks are implied. This principle allows the effects of AEB systems and secondary safety performance to be integrated into a single measure of safety. The results are used to examine the effect of AEB on Euro NCAP and ANCAP assessments using previously published results on the likely effect of AEB. The results show that, given certain assumptions about AEB performance, the addition of AEB is approximately the equivalent of increasing Euro NCAP test performance by one band, which corresponds to an increase in the score of 25% of the maximum. Copyright © 2013 Elsevier Ltd. All rights reserved.
-
Aerospace Safety Advisory Panel
NASA Technical Reports Server (NTRS)
1984-01-01
An assessment of NASA's safety performance for 1983 affirms that NASA Headquarters and Center management teams continue to hold the safety of manned flight to be their prime concern, and that essential effort and resources are allocated for maintaining safety in all of the development and operational programs. Those conclusions most worthy of NASA management concentration are given along with recommendations for action concerning; product quality and utility; space shuttle main engine; landing gear; logistics and management; orbiter structural loads, landing speed, and pitch control; the shuttle processing contractor; and the safety of flight operations. It appears that much needs to be done before the Space Transportation System can achieve the reliability necessary for safe, high rate, low cost operations.
-
Fault displacement hazard assessment for nuclear installations based on IAEA safety standards
NASA Astrophysics Data System (ADS)
Fukushima, Y.
2016-12-01
In the IAEA Safety NS-R-3, surface fault displacement hazard assessment (FDHA) is required for the siting of nuclear installations. If any capable faults exist in the candidate site, IAEA recommends the consideration of alternative sites. However, due to the progress in palaeoseismological investigations, capable faults may be found in existing site. In such a case, IAEA recommends to evaluate the safety using probabilistic FDHA (PFDHA), which is an empirical approach based on still quite limited database. Therefore a basic and crucial improvement is to increase the database. In 2015, IAEA produced a TecDoc-1767 on Palaeoseismology as a reference for the identification of capable faults. Another IAEA Safety Report 85 on ground motion simulation based on fault rupture modelling provides an annex introducing recent PFDHAs and fault displacement simulation methodologies. The IAEA expanded the project of FDHA for the probabilistic approach and the physics based fault rupture modelling. The first approach needs a refinement of the empirical methods by building a world wide database, and the second approach needs to shift from kinematic to the dynamic scheme. Both approaches can complement each other, since simulated displacement can fill the gap of a sparse database and geological observations can be useful to calibrate the simulations. The IAEA already supported a workshop in October 2015 to discuss the existing databases with the aim of creating a common worldwide database. A consensus of a unified database was reached. The next milestone is to fill the database with as many fault rupture data sets as possible. Another IAEA work group had a WS in November 2015 to discuss the state-of-the-art PFDHA as well as simulation methodologies. Two groups jointed a consultancy meeting in February 2016, shared information, identified issues, discussed goals and outputs, and scheduled future meetings. Now we may aim at coordinating activities for the whole FDHA tasks jointly.
-
Nel, Annalene; Haazen, Wouter; Nuttall, Jeremy; Romano, Joseph; Rosenberg, Zeda; van Niekerk, Neliëtte
2014-06-19
Women-initiated HIV-prevention products are urgently needed. To address this need, a trial was conducted to assess the safety and pharmacokinetics of a silicone elastomer matrix vaginal ring containing 25 mg of the antiretroviral drug dapivirine when used continuously for 28 consecutive days. A double-blind, randomized, placebo-controlled trial was conducted in 16 healthy, HIV-negative women, 18-40 years of age, who were randomized 1:1 to use either the active or matching placebo ring for 28 days. Participants were followed during and for 28 days after ring use for safety and pharmacokinetic evaluations. The dapivirine vaginal ring was safe and well tolerated with no differences in safety endpoints between the active and placebo ring. The concentration-time plots of dapivirine in vaginal fluid were indicative of a sustained release of dapivirine over the 28 days of use. Dapivirine vaginal fluid concentrations were highest near the ring, followed by the cervix and introïtus (mean Cmax of 80, 67 and 31 μg/g, respectively). Vaginal fluid concentrations of dapivirine on the day of ring removal (day 28) at all three collection sites exceeded by more than 3900-fold the IC99 for dapivirine in a tissue explant infection model. Plasma dapivirine concentrations were low (< 1 ng/ml) and remained well below those observed at the maximum tolerated dose for oral treatment (mean Cmax of 2286 ng/ml). The dapivirine vaginal ring has a safety and pharmacokinetic profile that supports its use as a sustained-release topical microbicide for HIV-1 prevention in women.
-
Exploring relationships between hospital patient safety culture and Consumer Reports safety scores.
Smith, Scott Alan; Yount, Naomi; Sorra, Joann
2017-02-16
A number of private and public companies calculate and publish proprietary hospital patient safety scores based on publicly available quality measures initially reported by the U.S. federal government. This study examines whether patient safety culture perceptions of U.S. hospital staff in a large national survey are related to publicly reported patient safety ratings of hospitals. The Agency for Healthcare Research and Quality Hospital Survey on Patient Safety Culture (Hospital SOPS) assesses provider and staff perceptions of hospital patient safety culture. Consumer Reports (CR), a U.S. based non-profit organization, calculates and shares with its subscribers a Hospital Safety Score calculated annually from patient experience survey data and outcomes data gathered from federal databases. Linking data collected during similar time periods, we analyzed relationships between staff perceptions of patient safety culture composites and the CR Hospital Safety Score and its five components using multiple multivariate linear regressions. We analyzed data from 164 hospitals, with patient safety culture survey responses from 140,316 providers and staff, with an average of 856 completed surveys per hospital and an average response rate per hospital of 56%. Higher overall Hospital SOPS composite average scores were significantly associated with higher overall CR Hospital Safety Scores (β = 0.24, p < 0.05). For 10 of the 12 Hospital SOPS composites, higher patient safety culture scores were associated with higher CR patient experience scores on communication about medications and discharge. This study found a relationship between hospital staff perceptions of patient safety culture and the Consumer Reports Hospital Safety Score, which is a composite of patient experience and outcomes data from federal databases. As hospital managers allocate resources to improve patient safety culture within their organizations, their efforts may also indirectly improve consumer
-
Microbiological Food Safety Surveillance in China
Pei, Xiaoyan; Li, Ning; Guo, Yunchang; Liu, Xiumei; Yan, Lin; Li, Ying; Yang, Shuran; Hu, Jing; Zhu, Jianghui; Yang, Dajin
2015-01-01
Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China. PMID:26343705
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Baalman, R.W.; Hays, I.D.
1981-02-01
Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis ofmore » criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications. (DLS)« less
-
Surrogate Safety Assessment Model and Validation : Final Report
DOT National Transportation Integrated Search
2008-06-01
Safety of traffic facilities is most often measured by counting the number (and severity) of crashes that occur. It is not possible to apply such a measurement technique to traffic facility designs that have not yet been built or deployed in the real...
-
Korban, Zygmunt
2015-01-01
Occupational health and safety management systems apply audit examinations as an integral element of these systems. The examinations are used to verify whether the undertaken actions are in compliance with the accepted regulations, whether they are implemented in a suitable way and whether they are effective. One of the earliest solutions of that type applied in the mining industry in Poland involved the application of audit research based on the MERIT survey (Management Evaluation Regarding Itemized Tendencies). A mathematical model applied in the survey facilitates the determination of assessment indexes WOPi for each of the assessed problem areas, which, among other things, can be used to set up problem area rankings and to determine an aggregate (synthetic) assessment. In the paper presented here, the assessment indexes WOPi were used to calculate a development measure, and the calculation process itself was supplemented with sensitivity analysis.