Sample records for safety basis documents

  1. Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beaulieu, R. A.

    The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less

  2. Authorization basis supporting documentation for plutonium finishing plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, J.P., Fluor Daniel Hanford

    1997-03-05

    The identification and definition of the authorization basis for the Plutonium Finishing Plant (PFP) facility and operations are essential for compliance to DOE Order 5480.21, Unreviewed Safety Questions. The authorization basis, as defined in the Order, consists of those aspects of the facility design basis, i.e., the structures, systems and components (SSCS) and the operational requirements that are considered to be important to the safety of operations and are relied upon by DOE to authorize operation of the facility. These facility design features and their function in various accident scenarios are described in WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysismore » Report (FSAR), Chapter 9, `Accident Analysis.` Figure 1 depicts the relationship of the Authorization Basis to its components and other information contained in safety documentation supporting the Authorization Basis. The PFP SSCs that are important to safety, collectively referred to as the `Safety Envelope` are discussed in various chapters of the FSAR and in WHC-SD-CP-OSR-010, Plutonium Finishing Plant Operational Safety Requirements. Other documents such as Criticality Safety Evaluation Reports (CSERS) address and support some portions of the Authorization Basis and Safety Envelope.« less

  3. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KRIPPS, L.J.

    2005-02-18

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the needmore » for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.« less

  4. 10 CFR 830.204 - Documented safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Documented safety analysis. 830.204 Section 830.204 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.204 Documented safety analysis... approval from DOE for the methodology used to prepare the documented safety analysis for the facility...

  5. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CROWE, R.D.; PIEPHO, M.G.

    2000-03-23

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  6. RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KOZLOWSKI, S.D.

    2007-05-30

    This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

  7. 10 CFR 830.206 - Preliminary documented safety analysis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Preliminary documented safety analysis. 830.206 Section 830.206 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.206 Preliminary documented safety analysis. If construction begins after December 11, 2000, the contractor...

  8. Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    G. L. Sharp; R. T. McCracken

    The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR

  9. CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kessler, S

    2009-04-21

    -2007. In reviewing documents used in classifying controls for Nuclear Safety, it was noted that DOE-HDBK-1188, 'Glossary of Environment, Health, and Safety Terms', defines an Administrative Control (AC) in terms that are different than typically used in Criticality Safety. As part of this CCR, a new term, Criticality Administrative Control (CAC) was defined to clarify the difference between an AC used for criticality safety and an AC used for nuclear safety. In Nuclear Safety terms, an AC is a provision relating to organization and management, procedures, recordkeeping, assessment, and reporting necessary to ensure safe operation of a facility. A CAC was defined as an administrative control derived in a criticality safety analysis that is implemented to ensure double contingency. According to criterion 2 of Section IV, 'Linkage to the Documented Safety Analysis', of DOESTD-3007-2007, the consequence of a criticality should be examined for the purposes of classifying the significance of a control or component. HNF-PRO-700, 'Safety Basis Development', provides control selection criteria based on consequence and risk that may be used in the development of a Criticality Safety Evaluation (CSE) to establish the classification of a component as a design feature, as safety class or safety significant, i.e., an Engineered Safety Feature (ESF), or as equipment important to safety; or merely provides defense-in-depth. Similar logic is applied to the CACs. Criterion 8C of DOE-STD-3007-2007, as written, added to the confusion of using the basic CCR from HNF-7098. The PFP CCR attempts to clarify this criterion by revising it to say 'Programmatic commitments or general references to control philosophy (e.g., mass control or spacing control or concentration control as an overall control strategy for the process without specific quantification of individual limits) is included in the PFP DSA'. Table 1 shows the PFP methodology for evaluating CACs. This evaluation process has been in use

  10. Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

    PubMed

    Furlan, Giovanni

    2012-08-01

    required by other documents. The author has identified signal detection (intended not only as adverse event disproportionate reporting, but including non-clinical, laboratory, clinical analysis data and literature screening) and characterization as the basis for the preparation of all drug safety documents, which can be viewed as different ways of presenting the results of this activity. Therefore, the author proposes to merge all the aggregate reports required by current regulations into a single document - the Drug Safety Master File. This report should contain all the available information, from any source, regarding the potential and identified risks of a drug. It should be a living document updated and submitted to regulatory authorities on an ongoing basis.

  11. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor responsible for a hazard category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis...

  12. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor responsible for a hazard category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis...

  13. DARHT: INTEGRATION OF AUTHORIZATION BASIS REQUIREMENTS AND WORKER SAFETY

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    D. A. MC CLURE; C. A. NELSON; R. L. BOUDRIE

    2001-04-01

    This document describes the results of consensus agreements reached by the DARHT Safety Planning Team during the development of the update of the DARHT Safety Analysis Document (SAD). The SAD is one of the Authorization Basis (AB) Documents required by the Department prior to granting approval to operate the DARHT Facility. The DARHT Safety Planning Team is lead by Mr. Joel A. Baca of the Department of Energy Albuquerque Operations Office (DOE/AL). Team membership is drawn from the Department of Energy Albuquerque Operations Office, the Department of Energy Los Alamos Area Office (DOE/LAAO), and several divisions of the Los Alamosmore » National Laboratory. Revision 1 of the DARHT SAD had been written as part of the process for gaining approval to operate the Phase 1 (First Axis) Accelerator. Early in the planning stage for the required update of the SAD for the approval to operate both Phase 1 and Phase 2 (First Axis and Second Axis) DARHT Accelerator, it was discovered that a conflict existed between the Laboratory approach to describing the management of facility and worker safety.« less

  14. Flammable gas technical basis document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO, C.A.

    2003-03-22

    This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls.

  15. Environment, Health, and Safety - Construction Subcontractors Documents |

    Science.gov Websites

    NREL Environment, Health, and Safety - Construction Subcontractors Documents Environment , Health, and Safety - Construction Subcontractors Documents The purpose of this page is to ensure NREL Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and

  16. Flammable Gas Technical Basis Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO, C.A.

    2003-07-30

    This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls. Revision 1 incorporates comments received from ORP.

  17. Microgravity Experiments Safety and Integration Requirements Document Tree

    NASA Technical Reports Server (NTRS)

    Hogan, Jean M.

    1995-01-01

    This report is a document tree of the safety and integration documents required to develop a space experiment. Pertinent document information for each of the top level (tier one) safety and integration documents, and their applicable and reference (tier two) documents has been identified. This information includes: document title, revision level, configuration management, electronic availability, listed applicable and reference documents, source for obtaining the document, and document owner. One of the main conclusions of this report is that no single document tree exists for all safety and integration documents, regardless of the Shuttle carrier. This document also identifies the need for a single point of contact for customers wishing to access documents. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center, as well as for all developers of space experiments.

  18. Car manufacturers and global road safety: a word frequency analysis of road safety documents.

    PubMed

    Roberts, I; Wentz, R; Edwards, P

    2006-10-01

    The World Bank believes that the car manufacturers can make a valuable contribution to road safety in poor countries and has established the Global Road Safety Partnership (GRSP) for this purpose. However, some commentators are sceptical. The authors examined road safety policy documents to assess the extent of any bias. Word frequency analyses of road safety policy documents from the World Health Organization (WHO) and the GRSP. The relative occurrence of key road safety terms was quantified by calculating a word prevalence ratio with 95% confidence intervals. Terms for which there was a fourfold difference in prevalence between the documents were tabulated. Compared to WHO's World report on road traffic injury prevention, the GRSP road safety documents were substantially less likely to use the words speed, speed limits, child restraint, pedestrian, public transport, walking, and cycling, but substantially more likely to use the words school, campaign, driver training, and billboard. There are important differences in emphasis in road safety policy documents prepared by WHO and the GRSP. Vigilance is needed to ensure that the road safety interventions that the car industry supports are based on sound evidence of effectiveness.

  19. Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

  20. Intranet-based safety documentation in management of major hazards and occupational health and safety.

    PubMed

    Leino, Antti

    2002-01-01

    In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

  1. Preliminary Authorization Basis Documentation for the Proposed Bio Safety Level 3 (BSl-3) Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altenbach, T J; Nguyen, S N

    2003-09-20

    Lawrence Livermore National Laboratory (LLNL) is proposing to construct a biosafety level (BSL-3) facility at Site 200 in Livermore, California. Biosafety level 3 (BSL-3) is a designation assigned by the Centers for Disease Control and Prevention (CDC) and National Institutes Health (NIH) for handling infectious organisms based on the specific microorganisms and associated operations. Biosafety levels range from BSL-1 (lowest hazard) to BSL-4 (highest hazard). Details about the BSL-3 criteria are described in the Center of Disease Control and Prevention (CDC)/National Institutes of Health (NIH)'s publication ''Biosafety Microbiological and Biomedical Laboratories'' (BMBL), 4th edition (CDC 1999): The BSL-3 facility willmore » be built in accordance with the required BMBL guidelines. This Preliminary Authorization Basis Documentation (PABD) for the proposed BSL-3 facility has been prepared in accordance with the current contractual requirements at LLNL. This includes the LLNL Environment, Safety, and Health Manual (ES&H Manual) and applicable Work Smart Standards, including the biosafety standards, such as the aforementioned BMBL and the NIH Guidelines for Research Involving Recombinant DNA Molecules: The proposed BSL-3 facility is a 1,100 ft{sup 2}, one-story permanent prefabricated facility, which will have three individual BSL-3 laboratory rooms (one of which is an animal biosafety level-3 [ABSL-3] laboratory to handle rodents), a mechanical room, clothes-change and shower rooms, and small storage space (Figure 3.1). The BSL-3 facility will be designed and operated accordance with guidelines for BSL-3 laboratories established by the CDC and the NIH. No radiological, high explosives, fissile, or propellant material will be used or stored in the proposed BSL-3 facility. The BSL-3 facility will be used to develop scientific tools to identify and understand the pathogens of medical, environmental, and forensic importance. Microorganisms that are to be handled in

  2. Safety equipment list for the 241-SY-101 RAPID mitigation project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MORRIS, K.L.

    1999-06-29

    This document provides the safety classification for the safety (safety class and safety RAPID Mitigation Project. This document is being issued as the project SEL until the supporting authorization basis documentation, this document will be superseded by the TWRS SEL (LMHC 1999), documentation istlralized. Upon implementation of the authorization basis significant) structures, systems, and components (SSCS) associated with the 241-SY-1O1 which will be updated to include the information contained herein.

  3. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Safety management system document and data maintenance (1) Procedures which establish and maintain control of all documents and data relevant to the safety management system. (2) Documents are available at... safety management system have? 96.250 Section 96.250 Navigation and Navigable Waters COAST GUARD...

  4. Basis and Purpose Document for the proposed NESHAP for Pharmaceuticals Production

    EPA Pesticide Factsheets

    The Basis and Purpose Document provides background information on, and the rationale for, decisions made by EPA related to the proposed standards for the reduction of hazardous air pollutants (HAP) emitted through the manufacture of pharmaceutical products

  5. Authorization basis requirements comparison report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brantley, W.M.

    The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documentsmore » that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.« less

  6. Transit safety retrofit package development : applications requirements document.

    DOT National Transportation Integrated Search

    2014-05-01

    This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

  7. Electronic Medical Record Documentation of Driving Safety for Veterans with Diagnosed Dementia.

    PubMed

    Vair, Christina L; King, Paul R; Gass, Julie; Eaker, April; Kusche, Anna; Wray, Laura O

    2018-01-01

    Many older adults continue to drive following dementia diagnosis, with medical providers increasingly likely to be involved in addressing such safety concerns. This study examined electronic medical record (EMR) documentation of driving safety for veterans with dementia (N = 118) seen in Veterans Affairs primary care and interdisciplinary geriatrics clinics in one geographic region over a 10-year period. Qualitative directed content analysis of retrospective EMR data. Assessment of known risk factors or subjective concerns for unsafe driving were documented in fewer than half of observed cases; specific recommendations for driving safety were evident for a minority of patients, with formal driving evaluation the most frequently documented recommendation by providers. Utilizing data from actual clinical encounters provides a unique snapshot of how driving risk and safety concerns are addressed for veterans with dementia. This information provides a meaningful frame of reference for understanding potential strengths and possible gaps in how this important topic area is being addressed in the course of clinical care. The EMR is an important forum for interprofessional communication, with documentation of driving risk and safety concerns an essential element for continuity of care and ensuring consistency of information delivered to patients and caregivers.

  8. TA-55 Final Safety Analysis Report Comparison Document and DOE Safety Evaluation Report Requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alan Bond

    2001-04-01

    This document provides an overview of changes to the currently approved TA-55 Final Safety Analysis Report (FSAR) that are included in the upgraded FSAR. The DOE Safety Evaluation Report (SER) requirements that are incorporated into the upgraded FSAR are briefly discussed to provide the starting point in the FSAR with respect to the SER requirements.

  9. Safety and fitness electronic records (SAFER) system : logical architecture document : working draft

    DOT National Transportation Integrated Search

    1997-01-31

    This Logical Architecture Document includes the products developed during the functional analysis of the Safety and Fitness Electronic Records (SAFER) System. This document, along with the companion Operational Concept and Physical Architecture Docum...

  10. Electronic availability of microgravity experiments safety and integration requirements documents

    NASA Technical Reports Server (NTRS)

    Hogan, Jean M.

    1995-01-01

    This follow-on to NASA Contractor Report 195447, Microgravity Experiments Safety and Integration Requirements Document Tree, provides the details for accessing the systems that contain the official, electronic versions of the documents initially researched in NASA Contractor Report 195447. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center (PDC), as well as for all developers of space experiments. The PDC has acquired the hardware, software, ID's, and passwords necessary to access most of these systems and is now able to provide customers with current document information as well as immediate delivery of available documents in either electronic or hard copy format.

  11. Variable dynamic testbed vehicle : safety plan

    DOT National Transportation Integrated Search

    1997-02-01

    This safety document covers the entire safety process from inception to delivery of the Variable Dynamic Testbed Vehicle. In addition to addressing the process of safety on the vehicle , it should provide a basis on which to build future safety proce...

  12. The Algorithm Theoretical Basis Document for the GLAS Atmospheric Data Products

    NASA Technical Reports Server (NTRS)

    Palm, Stephen P.; Hart, William D.; Hlavka, Dennis L.; Welton, Ellsworth J.; Spinhirne, James D.

    2012-01-01

    The purpose of this document is to present a detailed description of the algorithm theoretical basis for each of the GLAS data products. This will be the final version of this document. The algorithms were initially designed and written based on the authors prior experience with high altitude lidar data on systems such as the Cloud and Aerosol Lidar System (CALS) and the Cloud Physics Lidar (CPL), both of which fly on the NASA ER-2 high altitude aircraft. These lidar systems have been employed in many field experiments around the world and algorithms have been developed to analyze these data for a number of atmospheric parameters. CALS data have been analyzed for cloud top height, thin cloud optical depth, cirrus cloud emittance (Spinhirne and Hart, 1990) and boundary layer depth (Palm and Spinhirne, 1987, 1998). The successor to CALS, the CPL, has also been extensively deployed in field missions since 2000 including the validation of GLAS and CALIPSO. The CALS and early CPL data sets also served as the basis for the construction of simulated GLAS data sets which were then used to develop and test the GLAS analysis algorithms.

  13. Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Browne, E.T.

    1981-03-01

    This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.

  14. 10 CFR 830.205 - Technical safety requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

  15. 10 CFR 830.205 - Technical safety requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

  16. NPR design basis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Locke, G.L.

    1958-09-08

    The design basis is composed of requirements and conditions for the design of the reactor plant (composed of the reactor and heat dissipation system). Its intent is to insure that the final product meets the economic, safety, and technical objectives of the project. The design basis is dependent on the ground rules, objectives, technical criteria, and practical design considerations. This document is being issued with the understanding that these items are not yet firmly established in all respects, and therefore, the numbers put down here are subject to change. Consideration of the spectrum of probable changes that might be mademore » leads to the conclusion that the numbers here are close to the final ones and are satisfactory as a basis for the initial stages of design. Some numbers are omitted because of insufficient data at this time.« less

  17. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  18. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  19. 25 CFR 559.7 - May the Chairman request Indian lands or environmental and public health and safety documentation...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and public health and safety documentation regarding any gaming place, facility, or location where... environmental and public health and safety documentation regarding any gaming place, facility, or location where gaming will occur? A tribe shall provide Indian lands or environmental and public health and safety...

  20. Health Information Technology, Patient Safety, and Professional Nursing Care Documentation in Acute Care Settings.

    PubMed

    Lavin, Mary Ann; Harper, Ellen; Barr, Nancy

    2015-04-14

    The electronic health record (EHR) is a documentation tool that yields data useful in enhancing patient safety, evaluating care quality, maximizing efficiency, and measuring staffing needs. Although nurses applaud the EHR, they also indicate dissatisfaction with its design and cumbersome electronic processes. This article describes the views of nurses shared by members of the Nursing Practice Committee of the Missouri Nurses Association; it encourages nurses to share their EHR concerns with Information Technology (IT) staff and vendors and to take their place at the table when nursing-related IT decisions are made. In this article, we describe the experiential-reflective reasoning and action model used to understand staff nurses' perspectives, share committee reflections and recommendations for improving both documentation and documentation technology, and conclude by encouraging nurses to develop their documentation and informatics skills. Nursing issues include medication safety, documentation and standards of practice, and EHR efficiency. IT concerns include interoperability, vendors, innovation, nursing voice, education, and collaboration.

  1. 78 FR 47805 - Test Documentation for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... Documents Access and Management System (ADAMS): You may access publicly available documents online in the... Management Plans for Digital Computer Software used in Safety Systems of Nuclear Power Plants,'' issued for... Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Revision...

  2. Water Resistant Container Technical Basis Document for the TA-55 Criticality Safety Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, Paul Herrick; Teague, Jonathan Gayle

    Criticality safety at TA-55 relies on nuclear material containers that are water resistant to prevent significant amounts of water from coming into contact with fissile material in the event of a fire that causes a breach of glovevbox confinement and subsequent fire water ingress. A “water tight container” is a container that will not allow more than 50ml of water ingress when fully submerged, except when under sufficient pressure to produce structural discontinuity. There are many types of containers, welded containers, hermetically sealed containers, filtered containers, etc.

  3. SU-E-T-201: Safety-Focused Customization of Treatment Plan Documentation.

    PubMed

    Schubert, L; Westerly, D; Stuhr, K; Miften, M

    2012-06-01

    Plan report documentation contains numerous details about the treatment plan, but critical information for patient safety is often presented without special emphasis. This can make it difficult to detect errors from treatment planning and data transfer during the initial chart review. The objective of this work is to improve safety measures in radiation therapy practice by customizing the treatment plan report to emphasize safety-critical information. Commands within the template file from a commercial planning system (Eclipse, Varian Medical Systems) that automatically generates the treatment plan report were reviewed and modified. Safety-critical plan parameters were identified from published risks known to be inherent in the treatment planning process. Risks having medium to high potential impact on patient safety included incorrect patient identifiers, erroneous use of the treatment prescription, and incorrect transfer of beam parameters or consideration of accessories. Specific examples of critical information in the treatment plan report that can be overlooked during a chart review included prescribed dose per fraction and number of fractions, wedge and open field monitor units, presence of beam accessories, and table shifts for patient setup. Critical information was streamlined and concentrated. Patient and plan identification, dose prescription details, and patient positioning couch shift instructions were placed on the first page. Plan information to verify the correct data transfer to the record and verify system was re-organized in an easy to review tabular format and placed in the second page of the customized printout. Placeholders were introduced to indicate both the presence and absence of beam modifiers. Font sizes and spacing were adjusted for clarity, and departmental standards and terminology were introduced to streamline data communication among staff members. Plan reporting documentation has been customized to concentrate and emphasize safety

  4. Documenting quality improvement and patient safety efforts: the quality portfolio. A statement from the academic hospitalist taskforce.

    PubMed

    Taylor, Benjamin B; Parekh, Vikas; Estrada, Carlos A; Schleyer, Anneliese; Sharpe, Bradley

    2014-01-01

    Physicians increasingly investigate, work, and teach to improve the quality of care and safety of care delivery. The Society of General Internal Medicine Academic Hospitalist Task Force sought to develop a practical tool, the quality portfolio, to systematically document quality and safety achievements. The quality portfolio was vetted with internal and external stakeholders including national leaders in academic medicine. The portfolio was refined for implementation to include an outlined framework, detailed instructions for use and an example to guide users. The portfolio has eight categories including: (1) a faculty narrative, (2) leadership and administrative activities, (3) project activities, (4) education and curricula, (5) research and scholarship, (6) honors, awards, and recognition, (7) training and certification, and (8) an appendix. The authors offer this comprehensive, yet practical tool as a method to document quality and safety activities. It is relevant for physicians across disciplines and institutions and may be useful as a standalone document or as an adjunct to traditional promotion documents. As the Next Accreditation System is implemented, academic medical centers will require faculty who can teach and implement the systems-based practice requirements. The quality portfolio is a method to document quality improvement and safety activities.

  5. Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-03-01

    The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

  6. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... for the design and construction of a new DOE nuclear facility or a major modification to an existing... acceptable nuclear safety design criteria for use in preparing a preliminary documented safety analysis. As a... mitigate hazards to workers, the public, or the environment. They include (1) physical, design, structural...

  7. Safety of Zoster Vaccine in Elderly Adults Following Documented Herpes Zoster

    PubMed Central

    Morrison, Vicki A.; Oxman, Michael N.; Levin, Myron J.; Schmader, Kenneth E.; Guatelli, John C.; Betts, Robert F.; Gelb, Larry D.; Pachucki, Constance T.; Keay, Susan K.; Menzies, Barbara; Griffin, Marie R.; Kauffman, Carol A.; Marques, Adriana R.; Toney, John F.; Simberkoff, Michael S.; Serrao, Richard; Arbeit, Robert D.; Gnann, John W.; Greenberg, Richard N.; Holodniy, Mark; Keitel, Wendy A.; Yeh, Shingshing S.; Davis, Larry E.; Crawford, George E.; Neuzil, Kathy M.; Johnson, Gary R.; Zhang, Jane H.; Harbecke, Rith; Chan, Ivan S. F.; Keller, Paul M.; Williams, Heather M.; Boardman, Kathy D.; Silber, Jeffrey L.; Annunziato, Paula W.

    2013-01-01

    Background. After completion of the Shingles Prevention Study (SPS; Department of Veterans Affairs Cooperative Studies Program Number 403), SPS participants who had initially received placebo were offered investigational zoster vaccine without charge. This provided an opportunity to determine the relative safety of zoster vaccine in older adults following documented herpes zoster (HZ). Methods. A total of 13 681 SPS placebo recipients who elected to receive zoster vaccine were followed for serious adverse events (SAE) for 28 days after vaccination. In contrast to the SPS, a prior episode of HZ was not a contraindication to receiving zoster vaccine. The SPS placebo recipients who received zoster vaccine included 420 who had developed documented HZ during the SPS. Results. The mean interval between the onset of HZ and the receipt of zoster vaccine in the 420 recipients with prior HZ was 3.61 years (median interval, 3.77 years [range, 3–85 months]); the interval was <5 years for approximately 80% of recipients. The proportion of vaccinated SPS placebo recipients with prior HZ who developed ≥1 SAE (0.95%) was not significantly different from that of vaccinated SPS placebo recipients with no prior history of HZ (0.66%), and the distribution of SAEs in the 2 groups was comparable. Conclusions. These results demonstrate that the general safety of zoster vaccine in older persons is not altered by a recent history of documented HZ, supporting the safety aspect of the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices recommendation to administer zoster vaccine to all persons ≥60 years of age with no contraindications, regardless of a prior history of HZ. PMID:23633406

  8. Safety of zoster vaccine in elderly adults following documented herpes zoster.

    PubMed

    Morrison, Vicki A; Oxman, Michael N; Levin, Myron J; Schmader, Kenneth E; Guatelli, John C; Betts, Robert F; Gelb, Larry D; Pachucki, Constance T; Keay, Susan K; Menzies, Barbara; Griffin, Marie R; Kauffman, Carol A; Marques, Adriana R; Toney, John F; Simberkoff, Michael S; Serrao, Richard; Arbeit, Robert D; Gnann, John W; Greenberg, Richard N; Holodniy, Mark; Keitel, Wendy A; Yeh, Shingshing S; Davis, Larry E; Crawford, George E; Neuzil, Kathy M; Johnson, Gary R; Zhang, Jane H; Harbecke, Rith; Chan, Ivan S F; Keller, Paul M; Williams, Heather M; Boardman, Kathy D; Silber, Jeffrey L; Annunziato, Paula W

    2013-08-15

    After completion of the Shingles Prevention Study (SPS; Department of Veterans Affairs Cooperative Studies Program Number 403), SPS participants who had initially received placebo were offered investigational zoster vaccine without charge. This provided an opportunity to determine the relative safety of zoster vaccine in older adults following documented herpes zoster (HZ). A total of 13 681 SPS placebo recipients who elected to receive zoster vaccine were followed for serious adverse events (SAE) for 28 days after vaccination. In contrast to the SPS, a prior episode of HZ was not a contraindication to receiving zoster vaccine. The SPS placebo recipients who received zoster vaccine included 420 who had developed documented HZ during the SPS. The mean interval between the onset of HZ and the receipt of zoster vaccine in the 420 recipients with prior HZ was 3.61 years (median interval, 3.77 years [range, 3-85 months]); the interval was <5 years for approximately 80% of recipients. The proportion of vaccinated SPS placebo recipients with prior HZ who developed ≥ 1 SAE (0.95%) was not significantly different from that of vaccinated SPS placebo recipients with no prior history of HZ (0.66%), and the distribution of SAEs in the 2 groups was comparable. These results demonstrate that the general safety of zoster vaccine in older persons is not altered by a recent history of documented HZ, supporting the safety aspect of the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices recommendation to administer zoster vaccine to all persons ≥ 60 years of age with no contraindications, regardless of a prior history of HZ.

  9. Current Sports: Medicine Issues. Annual Safety Education Review--1973.

    ERIC Educational Resources Information Center

    Craig, Timothy T., Ed.

    This document is a collection of papers whose theme is sports safety. Section one, "Government Interest in Sports Safety," includes an article on Washington, D.C.'s focus on sports safety. Section two, "Medical Aspects of Safety in Sports," includes articles regarding the medical basis of restriction from athletics, orthopaedic restrictions, and…

  10. The Algorithm Theoretical Basis Document for Tidal Corrections

    NASA Technical Reports Server (NTRS)

    Fricker, Helen A.; Ridgway, Jeff R.; Minster, Jean-Bernard; Yi, Donghui; Bentley, Charles R.`

    2012-01-01

    This Algorithm Theoretical Basis Document deals with the tidal corrections that need to be applied to range measurements made by the Geoscience Laser Altimeter System (GLAS). These corrections result from the action of ocean tides and Earth tides which lead to deviations from an equilibrium surface. Since the effect of tides is dependent of the time of measurement, it is necessary to remove the instantaneous tide components when processing altimeter data, so that all measurements are made to the equilibrium surface. The three main tide components to consider are the ocean tide, the solid-earth tide and the ocean loading tide. There are also long period ocean tides and the pole tide. The approximate magnitudes of these components are illustrated in Table 1, together with estimates of their uncertainties (i.e. the residual error after correction). All of these components are important for GLAS measurements over the ice sheets since centimeter-level accuracy for surface elevation change detection is required. The effect of each tidal component is to be removed by approximating their magnitude using tidal prediction models. Conversely, assimilation of GLAS measurements into tidal models will help to improve them, especially at high latitudes.

  11. Discussion on the Criterion for the Safety Certification Basis Compilation - Brazilian Space Program Case

    NASA Astrophysics Data System (ADS)

    Niwa, M.; Alves, N. C.; Caetano, A. O.; Andrade, N. S. O.

    2012-01-01

    The recent advent of the commercial launch and re- entry activities, for promoting the expansion of human access to space for tourism and hypersonic travel, in the already complex ambience of the global space activities, brought additional difficulties over the development of a harmonized framework of international safety rules. In the present work, with the purpose of providing some complementary elements for global safety rule development, the certification-related activities conducted in the Brazilian space program are depicted and discussed, focusing mainly on the criterion for certification basis compilation. The results suggest that the composition of a certification basis with the preferential use of internationally-recognized standards, as is the case of ISO standards, can be a first step toward the development of an international safety regulation for commercial space activities.

  12. Design-Load Basis for LANL Structures, Systems, and Components

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    I. Cuesta

    2004-09-01

    This document supports the recommendations in the Los Alamos National Laboratory (LANL) Engineering Standard Manual (ESM), Chapter 5--Structural providing the basis for the loads, analysis procedures, and codes to be used in the ESM. It also provides the justification for eliminating the loads to be considered in design, and evidence that the design basis loads are appropriate and consistent with the graded approach required by the Department of Energy (DOE) Code of Federal Regulation Nuclear Safety Management, 10, Part 830. This document focuses on (1) the primary and secondary natural phenomena hazards listed in DOE-G-420.1-2, Appendix C, (2) additional loadsmore » not related to natural phenomena hazards, and (3) the design loads on structures during construction.« less

  13. High-level waste tank farm set point document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREASmore » listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.« less

  14. Materials Safety Data Sheets: the basis for control of toxic chemicals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ketchen, E.E.; Porter, W.E.

    1979-09-01

    The Material Safety Data Sheets contained in this volume are the basis for the Toxic Chemical Control Program developed by the Industrial Hygiene Department, Health Division, ORNL. The three volumes are the update and expansion of ORNL/TM-5721 and ORNL/TM-5722 Material Safety Data Sheets: The Basis for Control of Toxic Chemicals, Volume I and Volume II. As such, they are a valuable adjunct to the data cards issued with specific chemicals. The chemicals are identified by name, stores catalog number where appropriate, and sequence numbers from the NIOSH Registry of Toxic Effects of Chemical Substances, 1977 Edition, if available. The datamore » sheets were developed and compiled to aid in apprising the employees of hazards peculiar to the handling and/or use of specific toxic chemicals. Space limitation necessitate the use of descriptive medical terms and toxicological abbreviations. A glossary and an abbreviation list were developed to define some of those sometimes unfamiliar terms and abbreviations. The page numbers are keyed to the catalog number in the chemical stores at ORNL.« less

  15. Materials Safety Data Sheets: the basis for control of toxic chemicals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ketchen, E.E.; Porter, W.E.

    The Material Safety Data Sheets contained in this volume are the basis for the Toxic Chemical Control Program developed by the Industrial Hygiene Department, Health Division, ORNL. The three volumes are the update and expansion of ORNL/TM-5721 and ORNL/TM-5722 Material Safety Data Sheets: The Basis for Control of Toxic Chemicals, Volume I and Volume II. As such, they are a valuable adjunct to the data cards issued with specific chemicals. The chemicals are identified by name, stores catalog number where appropriate, and sequence numbers from the NIOSH Registry of Toxic Effects of Chemical Substances, 1977 Edition, if available. The datamore » sheets were developed and compiled to aid in apprising the employees of hazards peculiar to the handling and/or use of specific toxic chemicals. Space limitation necessitate the use of descriptive medical terms and toxicological abbreviations. A glossary and an abbreviation list were developed to define some of those sometimes unfamiliar terms and abbreviations. The page numbers are keyed to the catalog number in the chemical stores at ORNL.« less

  16. Safety analysis report for the Waste Storage Facility. Revision 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bengston, S.J.

    1994-05-01

    This safety analysis report outlines the safety concerns associated with the Waste Storage Facility located in the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. The three main objectives of the report are: define and document a safety basis for the Waste Storage Facility activities; demonstrate how the activities will be carried out to adequately protect the workers, public, and environment; and provide a basis for review and acceptance of the identified risk that the managers, operators, and owners will assume.

  17. Comprehensive safety document/product.

    DOT National Transportation Integrated Search

    2013-06-01

    With 100 counties and more than 800 cities, towns, and township governments in North Carolina, there is a tremendous need to : disseminate road safety information at the local level. For safety gains to be made in NC communities there needs to be bot...

  18. Safety assessment of discharge chute isolation barrier preparation and installation. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Meichle, R.H.

    1994-10-10

    This revision responds to RL comments and increases the discussion of the ``effective hazard categorization`` and the readiness review basis. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparison of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions were made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classification.

  19. Technical Basis for Electromagnetic Compatibility Regulatory Guidance Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ewing, Paul D.; Korsah, Kofi; Harrison, Thomas J.

    2016-03-01

    The objective of this report is to serve as the technical basis document for the next, planned revision of this RG that highlights and provides the rationale for the recommended changes. The structure of this document follows and summarizes the several assessment activities undertaken during the course of this project to evaluate new and updated electromagnetic compatibility (EMC) standards, testing methods and limits, and relevant technology developments being incorporated into plant activities that may have EMI/RFI implications, as well as other specific issues, including impacts of electrostatic discharge (ESD) on safety equipment and impacts on increased usage of wireless devicesmore » in nuclear power plants.« less

  20. Overview of Energy Systems' safety analysis report programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-03-01

    The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

  1. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Analysis Reports for Nuclear Power Plants, or successor document. (2) A DOE nonreactor nuclear facility... with DOE Policy 450.2A, “Identifying, Implementing and Complying with Environment, Safety and Health..., the public and the environment from adverse consequences. These analyses and hazard controls...

  2. Occupational Safety Review of High Technology Facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee Cadwallader

    2005-01-31

    This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

  3. Fire safety in transit systems fault tree analysis

    DOT National Transportation Integrated Search

    1981-09-01

    Fire safety countermeasures applicable to transit vehicles are identified and evaluated. This document contains fault trees which illustrate the sequences of events which may lead to a transit-fire related casualty. A description of the basis for the...

  4. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 3: Nuclear Safety Analysis Document (NSAD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Nuclear safety analysis as applied to a space base mission is presented. The nuclear safety analysis document summarizes the mission and the credible accidents/events which may lead to nuclear hazards to the general public. The radiological effects and associated consequences of the hazards are discussed in detail. The probability of occurrence is combined with the potential number of individuals exposed to or above guideline values to provide a measure of accident and total mission risk. The overall mission risk has been determined to be low with the potential exposure to or above 25 rem limited to less than 4 individuals per every 1000 missions performed. No radiological risk to the general public occurs during the prelaunch phase at KSC. The most significant risks occur from prolonged exposure to reactor debris following land impact generally associated with the disposal phase of the mission where fission product inventories can be high.

  5. Sandia National Laboratories/New Mexico Environmental Information Document - Volume 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BAYLISS, LINDA S.; GUERRERO, JOSEPH V.; JOHNS, WILLIAM H.

    This Sandia National Laboratories/New Mexico Environmental Information Document (EID) compiles information on the existing environment, or environmental baseline, for SNUNM. Much of the information is drawn from existing reports and databases supplemented by new research and data. The SNL/NM EID, together with the Sandia National Laboratories/New Mexico Facilities and Safety Information Document, provide a basis for assessing the environment, safety, and health aspects of operating selected facilities at SNL/NM. The environmental baseline provides a record of the existing physical, biological, and socioeconomic environment at SNL/NLM prior to being altered (beneficially or adversely) by proposed programs or projects. More specifically, themore » EID provides information on the following topics: Geology; Land Use; Hydrology and Water Resources; Air Quality and Meteorology; Ecology; Noise and Vibration; Cultural Resources; Visual Resources; Socioeconomic and Community Services; Transportation; Material Management; Waste Management; and Regulatory Requirements.« less

  6. Biophysical and medical safety basis of laser emission

    NASA Astrophysics Data System (ADS)

    Paltsev, Yu.; Levina, A.

    1996-01-01

    Laser equipment may inflict serious losses to human health if safety norms established by relevant standards and other documentation are not properly observed. It is explained by physical properties of laser emission (LE) which differs from general light sources by quantitative behavior of such parameters as the degrees of coherence, monochromaticity, brightness, polarization. Thus, biological effects due to laser emission, as a rule, are more expressed comparing with other types of emission from other spontaneous light sources. LE effects biological tissues through the density of energy flow and impulse duration. It is common knowledge nowadays that LE biological action is assessed by two criteria: physical parameters and absorptive properties of tissues exposed to rays. LE causes the greatest danger to the eyes due to their specific structure. The next target organ vulnerable to LE is skin. Pathological changes of skin depend on the LE power, time of exposure, wave length, and the extent of skin pigmentation. Along with different kinds of damage directly in the tissues exposed to rays, LE may cause changes in organs and body systems subject to indirect exposure. It is important that these changes may develop due to low intensity levels of LE that do not cause local damage. National and international standards on LE safety are based on maximum allowable levels (MAL) of exposure. It has been generally accepted that the main MAL criterion is LE threshold minimal exposure which causes damage to retina, eyes, and skin. As distinct from foreign safety standards, hygienic norms and regulations are in force in the Russian Federation where additional co-efficients along with standard generally accepted MAL values have been introduced for the persons who are subject to occupational regular exposure to lasers. This approach has been chosen after the results of follow-up and health studies of these occupational contingents have been analyzed, and experiments on laboratory

  7. Too much information? A document analysis of sport safety resources from key organisations

    PubMed Central

    Finch, Caroline F

    2016-01-01

    Objectives The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Design Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. Setting This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. Participants The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. Results The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. Conclusions People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based

  8. Equivalent Safety Basis for Evaluation of On-Site Packages for US DOE Facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, A.C.

    Packages for transport of radioactive material within the boundaries of a Department of Energy facility (on-site) must conform to the requirements for packages shipped in normal commerce, or must provide equivalent safety. Equivalence is achieved if the frequency of severe on-site accidents, which could result in a release of radioactive material, is less than or equal to the frequency of Beyond-HAC accidents for packages in commerce. This is shown to be achieved it the rate of on-site accident is 22 per 100 MVM or lower. For equivalence to Normal Conditions of Transport, for on-site packages, appropriate, defensible Design Basis Conditionsmore » can be established and the ability of the package to meet the reduced requirements shown in the On-site Safety Assessment.« less

  9. The Algorithm Theoretical Basis Document for Level 1A Processing

    NASA Technical Reports Server (NTRS)

    Jester, Peggy L.; Hancock, David W., III

    2012-01-01

    The first process of the Geoscience Laser Altimeter System (GLAS) Science Algorithm Software converts the Level 0 data into the Level 1A Data Products. The Level 1A Data Products are the time ordered instrument data converted from counts to engineering units. This document defines the equations that convert the raw instrument data into engineering units. Required scale factors, bias values, and coefficients are defined in this document. Additionally, required quality assurance and browse products are defined in this document.

  10. Too much information? A document analysis of sport safety resources from key organisations.

    PubMed

    Bekker, Sheree; Finch, Caroline F

    2016-05-06

    The field of sport injury prevention has seen a marked increase in published research in recent years, with concomitant proliferation of lay sport safety resources, such as policies, fact sheets and posters. The aim of this study was to catalogue and categorise the number, type and topic focus of sport safety resources from a representative set of key organisations. Cataloguing and qualitative document analysis of resources available from the websites of six stakeholder organisations in Australia. This study was part of a larger investigation, the National Guidance for Australian Football Partnerships and Safety (NoGAPS) project. The NoGAPS study provided the context for a purposive sampling of six organisations involved in the promotion of safety in Australian football. These partners are recognised as being highly representative of organisations at national and state level that reflect similarly in their goals around sport safety promotion in Australia. The catalogue comprised 284 resources. More of the practical and less prescriptive types of resources, such as fact sheets, than formal policies were found. Resources for the prevention of physical injuries were the predominant sport safety issue addressed, with risk management, environmental issues and social behaviours comprising other categories. Duplication of resources for specific safety issues, within and across organisations, was found. People working within sport settings have access to a proliferation of resources, which creates a potential rivalry for sourcing of injury prevention information. Important issues that are likely to influence the uptake of safety advice by the general sporting public include the sheer number of resources available, and the overlap and duplication of resources addressing the same issues. The existence of a large number of resources from reputable organisations does not mean that they are necessarily evidence based, fully up to date or even effective in supporting sport

  11. Making Patient Risk Visible: Implementation of a Nursing Document Information System to Improve Patient Safety.

    PubMed

    Wang, Panfeng; Zhang, Hongjun; Li, Baohua; Lin, Keke

    2016-01-01

    The aims of this study were to develop a nursing information system (NIS), enhance the visibility of patient risk, and identify challenges and facilitators to adoption of the NIS risk assessment system for nurse leaders. This article describes the function of a nursing risk assessment information system, and the results of a survey on the risk assessment system. The results suggested that quality of information processing in nursing significantly improved patient safety. Nurses surveyed demonstrated a high degree of satisfaction, with saving time and improving safety. The nursing document information system described was introduced to improve patient safety and decrease risk. The application of the system has greatly enhanced the efficiency of nursing work, and guides the nurses to make an accurate, comprehensive and objective assessment of patient information, contributing significantly to further improvement in care standards and care decisions.

  12. 14 CFR 60.37 - FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA). 60.37 Section 60.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN FLIGHT SIMULATION TRAINING DEVICE INITIAL AND...

  13. 14 CFR 60.37 - FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA). 60.37 Section 60.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN FLIGHT SIMULATION TRAINING DEVICE INITIAL AND...

  14. 14 CFR 60.37 - FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA). 60.37 Section 60.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN FLIGHT SIMULATION TRAINING DEVICE INITIAL AND...

  15. 14 CFR 60.37 - FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA). 60.37 Section 60.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN FLIGHT SIMULATION TRAINING DEVICE INITIAL AND...

  16. 14 CFR 60.37 - FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false FSTD qualification on the basis of a Bilateral Aviation Safety Agreement (BASA). 60.37 Section 60.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN FLIGHT SIMULATION TRAINING DEVICE INITIAL AND...

  17. Safety and Security Interface Technology Initiative

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

    /Security Documentation Integration, Configuration Control, and development of a shared ‘tool box’ of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated implementation plan includes: (1) A recommended process for handling the documentation of the security and safety disciplines, including an appropriate change control process and participation by all stakeholders. (2) A means to package security systems with sufficient information to help expedite the flow of that system through the process. In addition, a means to share successes among sites, to include information and safety basis to the extent such information is transportable. (3) Identification of key security systems and associated essential security elements being installed and an arrangement for the sites installing these systems to host an appropriate team to review a specific system and determine what information is exportable. (4) Identification of the security systems’ essential elements and appropriate controls required for testing of these essential elements in the facility. (5) The ability to help refine and improve an agreed to control set at the manufacture stage.« less

  18. School Survey on Crime and Safety (SSOCS) 2000 Public-Use Data Files, User's Manual, and Detailed Data Documentation. [CD-ROM].

    ERIC Educational Resources Information Center

    National Center for Education Statistics (ED), Washington, DC.

    This CD-ROM contains the raw, public-use data from the 2000 School Survey on Crime and Safety (SSOCS) along with a User's Manual and Detailed Data Documentation. The data are provided in SAS, SPSS, STATA, and ASCII formats. The User's Manual and the Detailed Data Documentation are provided as .pdf files. (Author)

  19. A Mathematical Basis for the Safety Analysis of Conflict Prevention Algorithms

    NASA Technical Reports Server (NTRS)

    Maddalon, Jeffrey M.; Butler, Ricky W.; Munoz, Cesar A.; Dowek, Gilles

    2009-01-01

    In air traffic management systems, a conflict prevention system examines the traffic and provides ranges of guidance maneuvers that avoid conflicts. This guidance takes the form of ranges of track angles, vertical speeds, or ground speeds. These ranges may be assembled into prevention bands: maneuvers that should not be taken. Unlike conflict resolution systems, which presume that the aircraft already has a conflict, conflict prevention systems show conflicts for all maneuvers. Without conflict prevention information, a pilot might perform a maneuver that causes a near-term conflict. Because near-term conflicts can lead to safety concerns, strong verification of correct operation is required. This paper presents a mathematical framework to analyze the correctness of algorithms that produce conflict prevention information. This paper examines multiple mathematical approaches: iterative, vector algebraic, and trigonometric. The correctness theories are structured first to analyze conflict prevention information for all aircraft. Next, these theories are augmented to consider aircraft which will create a conflict within a given lookahead time. Certain key functions for a candidate algorithm, which satisfy this mathematical basis are presented; however, the proof that a full algorithm using these functions completely satisfies the definition of safety is not provided.

  20. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

  1. 16 CFR 1203.30 - Purpose, basis, and scope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1203.30 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Certification § 1203.30 Purpose, basis, and scope. (a) Purpose. The... of compliance in the form specified. (b) Basis. Section 14(a)(1) of the Consumer Product Safety Act...

  2. Guidelines for Documentation of Computer Programs and Automated Data Systems. (Category: Software; Subcategory: Documentation).

    ERIC Educational Resources Information Center

    Federal Information Processing Standards Publication, 1976

    1976-01-01

    These guidelines provide a basis for determining the content and extent of documentation for computer programs and automated data systems. Content descriptions of ten document types plus examples of how management can determine when to use the various types are included. The documents described are (1) functional requirements documents, (2) data…

  3. Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Korsah, K.

    This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I&C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I&C system upgrades of present-day nuclear power plants, as well as I&C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current,more » analog-based I&C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in 1998, and

  4. Cultural diversity: blind spot in medical curriculum documents, a document analysis.

    PubMed

    Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

    2014-08-22

    Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

  5. Juggling confidentiality and safety: a qualitative study of how general practice clinicians document domestic violence in families with children.

    PubMed

    Drinkwater, Jessica; Stanley, Nicky; Szilassy, Eszter; Larkins, Cath; Hester, Marianne; Feder, Gene

    2017-06-01

    Domestic violence and abuse (DVA) and child safeguarding are interlinked problems, impacting on all family members. Documenting in electronic patient records (EPRs) is an important part of managing these families. Current evidence and guidance, however, treats DVA and child safeguarding separately. This does not reflect the complexity clinicians face when documenting both issues in one family. To explore how and why general practice clinicians document DVA in families with children. A qualitative interview study using vignettes with GPs and practice nurses (PNs) in England. Semi-structured telephone interviews with 54 clinicians (42 GPs and 12 PNs) were conducted across six sites in England. Data were analysed thematically using a coding frame incorporating concepts from the literature and emerging themes. Most clinicians recognised DVA and its impact on child safeguarding, but struggled to work out the best way to document it. They described tensions among the different roles of the EPR: a legal document; providing continuity of care; information sharing to improve safety; and a patient-owned record. This led to strategies to hide information, so that it was only available to other clinicians. Managing DVA in families with children is complex and challenging for general practice clinicians. National integrated guidance is urgently needed regarding how clinicians should manage the competing roles of the EPR, while maintaining safety of the whole family, especially in the context of online EPRs and patient access. © British Journal of General Practice 2017.

  6. Juggling confidentiality and safety: a qualitative study of how general practice clinicians document domestic violence in families with children

    PubMed Central

    Drinkwater, Jessica; Stanley, Nicky; Szilassy, Eszter; Larkins, Cath; Hester, Marianne; Feder, Gene

    2017-01-01

    Background Domestic violence and abuse (DVA) and child safeguarding are interlinked problems, impacting on all family members. Documenting in electronic patient records (EPRs) is an important part of managing these families. Current evidence and guidance, however, treats DVA and child safeguarding separately. This does not reflect the complexity clinicians face when documenting both issues in one family. Aim To explore how and why general practice clinicians document DVA in families with children. Design and setting A qualitative interview study using vignettes with GPs and practice nurses (PNs) in England. Method Semi-structured telephone interviews with 54 clinicians (42 GPs and 12 PNs) were conducted across six sites in England. Data were analysed thematically using a coding frame incorporating concepts from the literature and emerging themes. Results Most clinicians recognised DVA and its impact on child safeguarding, but struggled to work out the best way to document it. They described tensions among the different roles of the EPR: a legal document; providing continuity of care; information sharing to improve safety; and a patient-owned record. This led to strategies to hide information, so that it was only available to other clinicians. Conclusion Managing DVA in families with children is complex and challenging for general practice clinicians. National integrated guidance is urgently needed regarding how clinicians should manage the competing roles of the EPR, while maintaining safety of the whole family, especially in the context of online EPRs and patient access. PMID:28137783

  7. Failures in communication through documents and documentation across the perioperative pathway.

    PubMed

    Braaf, Sandra; Riley, Robin; Manias, Elizabeth

    2015-07-01

    To explore how communication failures occur in documents and documentations across the perioperative pathway in nurses' interactions with other nurses, surgeons and anaesthetists. Documents and documentation are used to communicate vital patient and procedural information among nurses, and in nurses' interactions with surgeons and anaesthetists, across the perioperative pathway. Previous research indicates that communication failure regularly occurs in the perioperative setting. A qualitative study was undertaken. The study was conducted over three hospitals in Melbourne, Australia. One hundred and twenty-five healthcare professionals from the disciplines of surgery, anaesthesia and nursing participated in the study. Data collection commenced in January 2010 and concluded in October 2010. Data were generated through 350 hours of observation, two focus groups and 20 semi-structured interviews. A detailed thematic analysis was undertaken. Communication failure occurred owing to a reliance on documents and documentation to transfer information at patient transition points, poor quality documents and documentation, and problematic access to information. Institutional ruling practices of professional practice, efficiency and productivity, and fiscal constraint dominated the coordination of nurses', surgeons' and anaesthetists' communication through documents and documentation. These governing practices configured communication to be incongruous with reliably meeting safety and quality objectives. Communication failure occurred because important information was sometimes buried in documents, insufficient, inaccurate, out-of-date or not verbally reinforced. Furthermore, busy nurses were not always able to access information they required in a timely manner. Patient safety was affected, which led to delays in treatment and at times inadequate care. Organisational support needs to be provided to nurses, surgeons and anaesthetists so they have sufficient time to complete

  8. Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

  9. Safety Case Development as an Information Modelling Problem

    NASA Astrophysics Data System (ADS)

    Lewis, Robert

    This paper considers the benefits from applying information modelling as the basis for creating an electronically-based safety case. It highlights the current difficulties of developing and managing large document-based safety cases for complex systems such as those found in Air Traffic Control systems. After a review of current tools and related literature on this subject, the paper proceeds to examine the many relationships between entities that can exist within a large safety case. The paper considers the benefits to both safety case writers and readers from the future development of an ideal safety case tool that is able to exploit these information models. The paper also introduces the idea that the safety case has formal relationships between entities that directly support the safety case argument using a methodology such as GSN, and informal relationships that provide links to direct and backing evidence and to supporting information.

  10. Cultural diversity: blind spot in medical curriculum documents, a document analysis

    PubMed Central

    2014-01-01

    Background Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. Methods In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Results Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Conclusions Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula. PMID:25150546

  11. Technical basis for external dosimetry at the Waste Isolation Pilot Plant (WIPP)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bradley, E.W.; Wu, C.F.; Goff, T.E.

    1993-12-31

    The WIPP External Dosimetry Program, administered by Westinghouse Electric Corporation, Waste Isolation Division, for the US Department of Energy (DOE), provides external dosimetry support services for operations at the Waste Isolation Pilot Plant (WIPP) Site. These operations include the receipt, experimentation with, storage, and disposal of transuranic (TRU) wastes. This document describes the technical basis for the WIPP External Radiation Dosimetry Program. The purposes of this document are to: (1) provide assurance that the WIPP External Radiation Dosimetry Program is in compliance with all regulatory requirements, (2) provide assurance that the WIPP External Radiation Dosimetry Program is derived from amore » sound technical base, (3) serve as a technical reference for radiation protection personnel, and (4) aid in identifying and planning for future needs. The external radiation exposure fields are those that are documented in the WIPP Final Safety Analysis Report.« less

  12. Safety-related requirements for photovoltaic modules and arrays. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Levins, A.

    1984-03-01

    Underwriters Laboratories has conducted a study to identify and develop safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. This discussion of safety systems recognizes that there is little history on which to base the expected safety related performance of a photovoltaic system. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaicmore » systems is made. A discussion of the UL investigation of the photovoltaic module evaluated to the provisions of the Proposed UL Standard for Flat-Plate Photovoltaic Modules and Panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit grounding, and the type of circuit ground are covered. The development of the Standard for Flat-Plate Photovoltaic Modules and Panels has continued, and with both industry comment and a product submittal and listing, the Standard has been refined to a viable document allowing an objective safety review of photovoltaic modules and panels. How this document, and other UL documents would cover investigations of certain other photovoltaic system components is described.« less

  13. A Formal Basis for Safety Case Patterns

    NASA Technical Reports Server (NTRS)

    Denney, Ewen; Pai, Ganesh

    2013-01-01

    By capturing common structures of successful arguments, safety case patterns provide an approach for reusing strategies for reasoning about safety. In the current state of the practice, patterns exist as descriptive specifications with informal semantics, which not only offer little opportunity for more sophisticated usage such as automated instantiation, composition and manipulation, but also impede standardization efforts and tool interoperability. To address these concerns, this paper gives (i) a formal definition for safety case patterns, clarifying both restrictions on the usage of multiplicity and well-founded recursion in structural abstraction, (ii) formal semantics to patterns, and (iii) a generic data model and algorithm for pattern instantiation. We illustrate our contributions by application to a new pattern, the requirements breakdown pattern, which builds upon our previous work

  14. Traceability of Software Safety Requirements in Legacy Safety Critical Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.

    2007-01-01

    How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

  15. Towards a Formal Basis for Modular Safety Cases

    NASA Technical Reports Server (NTRS)

    Denney, Ewen; Pai, Ganesh

    2015-01-01

    Safety assurance using argument-based safety cases is an accepted best-practice in many safety-critical sectors. Goal Structuring Notation (GSN), which is widely used for presenting safety arguments graphically, provides a notion of modular arguments to support the goal of incremental certification. Despite the efforts at standardization, GSN remains an informal notation whereas the GSN standard contains appreciable ambiguity especially concerning modular extensions. This, in turn, presents challenges when developing tools and methods to intelligently manipulate modular GSN arguments. This paper develops the elements of a theory of modular safety cases, leveraging our previous work on formalizing GSN arguments. Using example argument structures we highlight some ambiguities arising through the existing guidance, present the intuition underlying the theory, clarify syntax, and address modular arguments, contracts, well-formedness and well-scopedness of modules. Based on this theory, we have a preliminary implementation of modular arguments in our toolset, AdvoCATE.

  16. Aviation and healthcare: a comparative review with implications for patient safety.

    PubMed

    Kapur, Narinder; Parand, Anam; Soukup, Tayana; Reader, Tom; Sevdalis, Nick

    2016-01-01

    Safety in aviation has often been compared with safety in healthcare. Following a recent article in this journal, the UK government set up an Independent Patient Safety Investigation Service, to emulate a similar well-established body in aviation. On the basis of a detailed review of relevant publications that examine patient safety in the context of aviation practice, we have drawn up a table of comparative features and a conceptual framework for patient safety. Convergence and divergence of safety-related behaviours across aviation and healthcare were derived and documented. Key safety-related domains that emerged included Checklists, Training, Crew Resource Management, Sterile Cockpit, Investigation and Reporting of Incidents and Organisational Culture. We conclude that whilst healthcare has much to learn from aviation in certain key domains, the transfer of lessons from aviation to healthcare needs to be nuanced, with the specific characteristics and needs of healthcare borne in mind. On the basis of this review, it is recommended that healthcare should emulate aviation in its resourcing of staff who specialise in human factors and related psychological aspects of patient safety and staff wellbeing. Professional and post-qualification staff training could specifically include Cognitive Bias Avoidance Training, as this appears to play a key part in many errors relating to patient safety and staff wellbeing.

  17. AEDT Software Requirements Documents - Draft

    DOT National Transportation Integrated Search

    2007-01-25

    This software requirements document serves as the basis for designing and testing the Aviation Environmental Design Tool (AEDT) software. The intended audience for this document consists of the following groups: the AEDT designers, developers, and te...

  18. A prioritization of generic safety issues. Supplement 19, Revision insertion instructions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1995-11-01

    The report presents the safety priority ranking for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP, and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolution of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors.more » To the extent practical, estimates are quantitative. This document provides revisions and amendments to the report.« less

  19. 16 CFR 1203.3 - Referenced documents.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Referenced documents. 1203.3 Section 1203.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... international standard, it has become a consensus national standard because all recent major voluntary standards...

  20. MODIS. Volume 2: MODIS level 1 geolocation, characterization and calibration algorithm theoretical basis document, version 1

    NASA Technical Reports Server (NTRS)

    Barker, John L.; Harnden, Joann M. K.; Montgomery, Harry; Anuta, Paul; Kvaran, Geir; Knight, ED; Bryant, Tom; Mckay, AL; Smid, Jon; Knowles, Dan, Jr.

    1994-01-01

    The EOS Moderate Resolution Imaging Spectrometer (MODIS) is being developed by NASA for flight on the Earth Observing System (EOS) series of satellites, the first of which (EOS-AM-1) is scheduled for launch in 1998. This document describes the algorithms and their theoretical basis for the MODIS Level 1B characterization, calibration, and geolocation algorithms which must produce radiometrically, spectrally, and spatially calibrated data with sufficient accuracy so that Global change research programs can detect minute changes in biogeophysical parameters. The document first describes the geolocation algorithm which determines geodetic latitude, longitude, and elevation of each MODIS pixel and the determination of geometric parameters for each observation (satellite zenith angle, satellite azimuth, range to the satellite, solar zenith angle, and solar azimuth). Next, the utilization of the MODIS onboard calibration sources, which consist of the Spectroradiometric Calibration Assembly (SRCA), Solar Diffuser (SD), Solar Diffuser Stability Monitor (SDSM), and the Blackbody (BB), is treated. Characterization of these sources and integration of measurements into the calibration process is described. Finally, the use of external sources, including the Moon, instrumented sites on the Earth (called vicarious calibration), and unsupervised normalization sites having invariant reflectance and emissive properties is treated. Finally, algorithms for generating utility masks needed for scene-based calibration are discussed. Eight appendices are provided, covering instrument design and additional algorithm details.

  1. Firefighter safety: rampant unsafe practices as documented in mainstream media.

    PubMed

    Kahn, Steven A; Woods, Jason; Sipes, Jan C; Toscano, Nicole; Bell, Derek E

    2014-01-01

    More than 30,000 firefighters are injured on the fireground each year. Literature suggests that injury often occurs when protective gear is not used properly. According to firefighters, failure to correctly wear protective equipment occurs for several reasons: (1) gear not used because of haste, (2) cumbersome gear can sometimes interfere with performance, and (3) cultural factors. The purpose of this study is to quantify improper gear and tactic use in a publicly available, online video repository in order to better understand unsafe firefighting. This was an Institutional Review Board-exempt study of public video records. A search for "fire fighting videos" was conducted at YouTube (www.youtube.com). The first 50 videos that contained volunteer or career firefighters at work fighting fires were selected evaluated for appropriate use of personal protective equipment and for safe behavior. The videos were evaluated by two highly experienced professional firefighters. Of the 50 videos reviewed, 25 (50%) demonstrated violations of firefighting safety principles. Of the unsafe videos, 21 (42%) displayed firefighters improperly using gear, while the other 4 (8%) were related to unsound tactics. The most common problem was failure to wear or properly secure a self-contained breathing apparatus when appropriate (14 videos or 28%). The second most common failure was lack of helmet, hood, or approved gloves (11 videos or 22%). In conclusion, firefighting as documented on YouTube is often unsafe because of failure to properly use personal protective equipment. Half of the videos reviewed contained unsafe practices. With such a shockingly high rate of unsafe firefighting, the profession is in need of additional education and reform. In response to this epidemic, a multidisciplinary educational program has been developed to improve firefighter awareness of gear limitations and burn injury risk. Effectiveness of educational programs should be documented in additional

  2. Aviation and healthcare: a comparative review with implications for patient safety

    PubMed Central

    Parand, Anam; Soukup, Tayana; Reader, Tom; Sevdalis, Nick

    2015-01-01

    Safety in aviation has often been compared with safety in healthcare. Following a recent article in this journal, the UK government set up an Independent Patient Safety Investigation Service, to emulate a similar well-established body in aviation. On the basis of a detailed review of relevant publications that examine patient safety in the context of aviation practice, we have drawn up a table of comparative features and a conceptual framework for patient safety. Convergence and divergence of safety-related behaviours across aviation and healthcare were derived and documented. Key safety-related domains that emerged included Checklists, Training, Crew Resource Management, Sterile Cockpit, Investigation and Reporting of Incidents and Organisational Culture. We conclude that whilst healthcare has much to learn from aviation in certain key domains, the transfer of lessons from aviation to healthcare needs to be nuanced, with the specific characteristics and needs of healthcare borne in mind. On the basis of this review, it is recommended that healthcare should emulate aviation in its resourcing of staff who specialise in human factors and related psychological aspects of patient safety and staff wellbeing. Professional and post-qualification staff training could specifically include Cognitive Bias Avoidance Training, as this appears to play a key part in many errors relating to patient safety and staff wellbeing. PMID:26770817

  3. The National Aviation Operational Monitoring Service (NAOMS): A Documentation of the Development of a Survey Methodology

    NASA Technical Reports Server (NTRS)

    Connors, Mary M.; Mauro, Robert; Statler, Irving C.

    2012-01-01

    The National Aviation Operational Monitoring Service (NAOMS) was a research project under NASA s Aviation Safety Program during the years from 2000 to 2005. The purpose of this project was to develop a methodology for gaining reliable information on changes over time in the rates-of-occurrence of safety-related events as a means of assessing the safety of the national airspace. The approach was a scientifically designed survey of the operators of the aviation system concerning their safety-related experiences. This report presents the results of the methodology developed and a demonstration of the NAOMS concept through a survey of nearly 20,000 randomly selected air-carrier pilots. Results give evidence that the NAOMS methodology can provide a statistically sound basis for evaluating trends of incidents that could compromise safety. The approach and results are summarized in the report and supporting documentation and complete analyses of results are presented in 14 appendices.

  4. Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1988-12-15

    This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in thesemore » appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.« less

  5. Cf-252 Characterization Documents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, Alexander

    2014-03-14

    Six documents were written by Vance and Associates under contract to the Off-Site Source Recovery Project of Los Alamos National Laboratory. These Six documents provided the basis for characterization of Californium-252 sealed sources and for the packaging and manifesting of this material for disposal at the Waste Isolation Pilot Project. The Six documents are: 1. VA-OSR-10, Development of radionuclide distributions for Cf-252 sealed sources. 2. VA-OSR-11, Uncertainty analysis for Cf-252 sealed sources. 3. VA-OSR-12, To determine the radionuclides in the waste drums containing Cf-252 sealed source waste that are required to be reported under the requirements of the WIPP WACmore » and the TRAMPAC. 4. VA-OSR-13, Development of the spreadsheet for the radiological calculations for the characterization of Cf-252 sources. 5. VA-OSR-14, Relative importance of neutron-induced fission in Cf-252 sources. 6. VA-OSR-15, Determine upper bound of decay product inventories from a drum of Cf-252 sources. These six documents provide the technical basis for the characterization of Cf-252 sources and will be part of the AK documentation required for submittal to the Central Characterization Project (CCP) of WIPP.« less

  6. "Evidence" Under a Magnifying Glass: Thoughts on Safety Argument Epistemology

    NASA Technical Reports Server (NTRS)

    Graydon, P. J.; Holloway, C. M.

    2015-01-01

    Common definitions of "safety case" emphasize that evidence is the basis of a safety argument, yet few widely referenced works explicitly define "evidence". Their examples suggest that similar things can be regarded as evidence. But the category evidence seems to contain (1) processes for finding things out, (2) information resulting from such processes, and (3) relevant documents. Moreover, any item of evidence could be replaced by further argument. Normative models of informal argumentation do not offer clear guidance on when a safety argument should cite evidence rather than appeal to a more detailed argument. Disciplines such as the law address the problem with a practical, domain-specific epistemology. In this paper, we explore these problems associated with evidence citations in safety arguments, identify goals for a theory of safety argument evidence and a practical safety argument epistemology, propose a model of safety evidence citation that advances the identified goals, and present a related extension to the Goal Structuring Notation (GSN).

  7. A Generic Software Safety Document Generator

    NASA Technical Reports Server (NTRS)

    Denney, Ewen; Venkatesan, Ram Prasad

    2004-01-01

    Formal certification is based on the idea that a mathematical proof of some property of a piece of software can be regarded as a certificate of correctness which, in principle, can be subjected to external scrutiny. In practice, however, proofs themselves are unlikely to be of much interest to engineers. Nevertheless, it is possible to use the information obtained from a mathematical analysis of software to produce a detailed textual justification of correctness. In this paper, we describe an approach to generating textual explanations from automatically generated proofs of program safety, where the proofs are of compliance with an explicit safety policy that can be varied. Key to this is tracing proof obligations back to the program, and we describe a tool which implements this to certify code auto-generated by AutoBayes and AutoFilter, program synthesis systems under development at the NASA Ames Research Center. Our approach is a step towards combining formal certification with traditional certification methods.

  8. Proceedings of the Meeting of the Study Committee of International Federation for Documentation "Research on the Theoretical Basis of Information" (Moscow, 24-26 February 1970).

    ERIC Educational Resources Information Center

    All-Union Inst. for Scientific and Technical Information, Moscow (USSR).

    Reports given before the Committee on "Research on the Theoretical Basis of Information" of the International Federation for Documentation (FID/RI) are presented unaltered and unabridged in English or in Russian -- the language of their presentation. Each report is accompanied by an English or Russian resume. Generally, only original…

  9. Document Set Differentiability Analyzer v. 0.1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Osborn, Thor D.

    Software is a JMP Scripting Language (JSL) script designed to evaluate the differentiability of a set of documents that exhibit some conceptual commonalities but are expected to describe substantially different – thus differentiable – categories. The script imports the document set, a subset of which may be partitioned into an additions pool. The bulk of the documents form a basis pool. Text analysis is applied to the basis pool to extract a mathematical representation of its conceptual content, referred to as the document concept space. A bootstrapping approach is applied to that mathematical representation in order to generate a representationmore » of a large population of randomly designed documents that could be written within the concept space, notably without actually writing the text of those documents.The Kolmogorov-Smirnov test is applied to determine whether the basis pool document set exhibits superior differentiation relative to the randomly designed virtual documents produced by bootstrapping. If an additions pool exists, the documents are incrementally added to the basis pool, choosing the best differentiated remaining document at each step. In this manner the impact of additional categories to overall document set differentiability may be assessed.The software was developed to assess the differentiability of job description document sets. Differentiability is key to meaningful categorization. Poor job differentiation may have economic, ethical, and/or legal implications for an organization. Job categories are used in the assignment of market-based salaries; consequently, poor differentiation of job duties may set the stage for legal challenges if very similar jobs pay differently depending on title, a circumstance that also invites economic waste.The software can be applied to ensure job description set differentiability, reducing legal, economic, and ethical risks to an organization and its people. The extraction of the conceptual space to a

  10. 49 CFR 237.155 - Documents and records.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Documentation, Records, and Audits of Bridge Management Programs § 237.155 Documents and records. Each track owner required to implement a bridge management... 49 Transportation 4 2012-10-01 2012-10-01 false Documents and records. 237.155 Section 237.155...

  11. 29 CFR 1905.7 - Form of documents; subscription; copies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... UNDER THE WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1905.7 Form of documents... 29 Labor 5 2010-07-01 2010-07-01 false Form of documents; subscription; copies. 1905.7 Section 1905.7 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

  12. Documentation: Records and Reports.

    PubMed

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  13. [Recommendations for inspections of the French nuclear safety authority].

    PubMed

    Rousse, C; Chauvet, B

    2015-10-01

    The French nuclear safety authority is responsible for the control of radiation protection in radiotherapy since 2002. Controls are based on the public health and the labour codes and on the procedures defined by the controlled health care facility for its quality and safety management system according to ASN decision No. 2008-DC-0103. Inspectors verify the adequacy of the quality and safety management procedures and their implementation, and select process steps on the basis of feedback from events notified to ASN. Topics of the inspection are communicated to the facility at the launch of a campaign, which enables them to anticipate the inspectors' expectations. In cases where they are not physicians, inspectors are not allowed to access information covered by medical confidentiality. The consulted documents must therefore be expunged of any patient-identifying information. Exchanges before the inspection are intended to facilitate the provision of documents that may be consulted. Finally, exchange slots between inspectors and the local professionals must be organized. Based on improvements achieved by the health care centres and on recommendations from a joint working group of radiotherapy professionals and the nuclear safety authority, changes will be made in the control procedure that will be implemented when developing the inspection program for 2016-2019. Copyright © 2015. Published by Elsevier SAS.

  14. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice; Baggs, Rhoda

    2007-01-01

    Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

  15. Guiding principles of safety as a basis for developing a pharmaceutical safety culture.

    PubMed

    Edwards, Brian; Olsen, Axel K; Whalen, Matthew D; Gold, Marla J

    2007-05-01

    Despite the best efforts of industry and regulatory authorities, the trust of society in the process of medicine development and communication of pharmaceutical risk has ebbed away. In response the US government has called for a culture of compliance while the EU regulators talk of a 'culture of scientific excellence'. However, one of the fundamental problems hindering progress to rebuilding trust based on a pharmaceutical safety culture is the lack of agreement and transparency between all stakeholders as to what is meant by a 'Safety of Medicines'. For that reason, we propose 'Guiding Principles of Safety for Pharmaceuticals' are developed analogous to the way that Chemical Safety has been tackled. A logical starting point would be to examine the Principles outlined by the US Institute of Medicine although we acknowledge that these Principles require further extensive debate and definition. Nevertheless, the Principles should take centre stage in the reform of pharmaceutical development required to restore society's trust.

  16. The power of simplification: Operator interface with the AP1000{sup R} during design-basis and beyond design-basis events

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Williams, M. G.; Mouser, M. R.; Simon, J. B.

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and cost. The passive safety features are designed to function without safety-grade support systems such as component cooling water, service water, compressed air or HVAC. The AP1000 passive safety features achieve and maintain safe shutdown in case of a design-basis accident for 72 hours without need for operator action, meeting the expectations provided in the European Utility Requirements and the Utility Requirement Document for passive plants. Limited operator actions may be required to maintain safe conditionsmore » in the spent fuel pool (SFP) via passive means. This safety approach therefore minimizes the reliance on operator action for accident mitigation, and this paper examines the operator interaction with the Human-System Interface (HSI) as the severity of an accident increases from an anticipated transient to a design basis accident and finally, to a beyond-design-basis event. The AP1000 Control Room design provides an extremely effective environment for addressing the first 72 hours of design-basis events and transients, providing ease of information dissemination and minimal reliance upon operator actions. Symptom-based procedures including Emergency Operating Procedures (EOPs), Abnormal Operating Procedures (AOPs) and Alarm Response Procedures (ARPs) are used to mitigate design basis transients and accidents. Use of the Computerized Procedure System (CPS) aids the operators during mitigation of the event. The CPS provides cues and direction to the operators as the event progresses. If the event becomes progressively worse or lasts longer than 72 hours, and depending upon the nature of failures that may have occurred, minimal operator actions may be required outside of the control room in areas that have been designed to be accessible using components that have

  17. 14 CFR Appendix B to Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

  18. 14 CFR Appendix B to Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

  19. 29 CFR 1975.2 - Basis of authority.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) COVERAGE OF EMPLOYERS UNDER THE WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 § 1975.2 Basis... Occupational Safety and Health Act of 1970, is derived mainly from the Commerce Clause of the Constitution...

  20. Safety, reliability, maintainability and quality provisions for the Space Shuttle program

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This publication establishes common safety, reliability, maintainability and quality provisions for the Space Shuttle Program. NASA Centers shall use this publication both as the basis for negotiating safety, reliability, maintainability and quality requirements with Shuttle Program contractors and as the guideline for conduct of program safety, reliability, maintainability and quality activities at the Centers. Centers shall assure that applicable provisions of the publication are imposed in lower tier contracts. Centers shall give due regard to other Space Shuttle Program planning in order to provide an integrated total Space Shuttle Program activity. In the implementation of safety, reliability, maintainability and quality activities, consideration shall be given to hardware complexity, supplier experience, state of hardware development, unit cost, and hardware use. The approach and methods for contractor implementation shall be described in the contractors safety, reliability, maintainability and quality plans. This publication incorporates provisions of NASA documents: NHB 1700.1 'NASA Safety Manual, Vol. 1'; NHB 5300.4(IA), 'Reliability Program Provisions for Aeronautical and Space System Contractors'; and NHB 5300.4(1B), 'Quality Program Provisions for Aeronautical and Space System Contractors'. It has been tailored from the above documents based on experience in other programs. It is intended that this publication be reviewed and revised, as appropriate, to reflect new experience and to assure continuing viability.

  1. A simple 3-day "rush" venom immunotherapy protocol: documentation of safety.

    PubMed

    Kalogeromitros, D; Makris, M; Koti, I; Chliva, C; Mellios, A; Avgerinou, G; Theoharides, T C

    2010-01-01

    Venom immunotherapy (VIT) is the only effective treatment for hymenoptera hypersensitivity, but conventional protocols require a few weeks. We present the safety of a 3-day "rush" protocol that requires only 7 injections and 255 mgr cumulative dose before the 100 microg maintenance dose. Forty-nine patients (33 males, 16 females) of mean age 43.57+/-12.9 yrs received "rush" VIT. Only 7 injections were required until the maintenance dose of 100 mgr was reached on Day 5. On Day 1, four injections were administered with initial dose of 5 mgr and total dose of 75 microg. On Day 3 a cumulative dose of 180 mgr was administered in three injections (40 mgr, 60 mgr and 80 mgr). A dose of 100 mgr was administered on Day 5. Twenty-nine individuals were treated with Honey-Bee venom; 18 with Common wasp; 5 with Paper Wasp; while 13 patients received Mixed Vespid preparation. Inclusion criteria were documented IgE-mediated allergy with intradermal sensitivity to < or =0.1 mgr/ml venom concentration and concomitant detection of specific venom IgE > or =0.35 kU/l. All patients reached the maintenance dose. Forty-nine patients received 65 immunotherapy courses, resulting in 1520 injections. Thirty-three systemic reactions: 7 during building phase (1.5%); and 26 in the maintenance dose (2.4%) were observed in 9 patients. The percentage of reactions/total injection number was 2.2%; all reactions were mild-to-moderate. Fourteen patients reported documented field stings at least two months after VIT onset with only one reported mild systemic reaction. We propose a simple "rush" VIT protocol in an outpatient setting as an easy-to-perform alternative option for VIT induction phase. Copyright 2009 SEICAP. Published by Elsevier Espana. All rights reserved.

  2. Quality and quantity of information in summary basis of decision documents issued by health Canada.

    PubMed

    Habibi, Roojin; Lexchin, Joel

    2014-01-01

    Health Canada's Summary Basis of Decision (SBD) documents outline the clinical trial information that was considered in approving a new drug. We examined the ability of SBDs to inform clinician decision-making. We asked if SBDs answered three questions that clinicians might have prior to prescribing a new drug: 1) Do the characteristics of patients enrolled in trials match those of patients in their practice? 2) What are the details concerning the drug's risks and benefits? 3) What are the basic characteristics of trials? 14 items of clinical trial information were identified from all SBDs published on or before April 2012. Each item received a score of 2 (present), 1 (unclear) or 0 (absent). The unit of analysis was the individual SBD, and an overall SBD score was derived based on the sum of points for each item. Scores were expressed as a percentage of the maximum possible points, and then classified into five descriptive categories based on that score. Additionally, three overall 'component' scores were tallied for each SBD: "patient characteristics", "benefit/risk information" and "basic trial characteristics". 161 documents, spanning 456 trials, were analyzed. The majority (126/161) were rated as having information sometimes present (score of >33 to 66%). No SBDs had either no information on any item, or 100% of the information. Items in the patient characteristics component scored poorest (mean component score of 40.4%), while items corresponding to basic trial information were most frequently provided (mean component score of 71%). The significant omissions in the level of clinical trial information in SBDs provide little to aid clinicians in their decision-making. Clinicians' preferred source of information is scientific knowledge, but in Canada, access to such information is limited. Consequently, we believe that clinicians are being denied crucial tools for decision-making.

  3. Discrepancies between home medication and patient documentation in primary care.

    PubMed

    Rose, Olaf; Jaehde, Ulrich; Köberlein-Neu, Juliane

    2018-04-01

    Medication Reconciliation leads to quick detection of drug-related problems, studies in ambulatory care are scarce. The recently introduced Medication Plan in Germany serves as an ideal basis for Medication Reconciliation. The study aim was to provide accurate data on the magnitude of discrepancy between the prescription and the actually taken medicine. Clinical relevance of discrepancies was assessed to estimate the impact on medication safety. Patients were assessed at home, data was reconciled with the physician's documentation. Discrepancies were analyzed and stratified. Risk for hospitalization, risk for falls and the potential for drug-drug interactions was estimated based on literature. Drugs were tested for its origin and grouped to indication clusters. Detected DRPs at a Medication Review were linked to the results at Medication Reconciliation. Medication of 142 elderly patients from 12 practices was reconciled. 1498 drugs were found at the home assessment, 1099 (73.4%) of which were detected in the physician's documentation. 94.4% of the patients were affected by discrepancies. A total of 2.8 ± 2.4 drugs was undocumented per patient. 26.6% of missing drugs were prescribed by medical specialists, 42.5% of drugs of unknown origin were prescription drugs. 53.9% of the patients used a undocumented drug, which carried a high risk for hospitalization. 23.1% of the drugs not covered were used for treatment of cardiovascular diseases. 65.8% of the differing drugs caused at least one DRP. A high discrepancy between the drugs used by the patient and the medication documented by the primary care physician could be found. Relating drugs had a profound systemic effect and were particular relevant to medication safety. Many drugs were prescription drugs. The majority of differing drugs caused DRPs. A collaborative Medication Reconciliation as part of a Medication Management could compile the entire medication and increase patient safety. Copyright © 2017 Elsevier Inc

  4. 49 CFR 397.19 - Instructions and documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HAZARDOUS MATERIALS; DRIVING AND PARKING RULES General § 397.19 Instructions and documents. (a) A motor carrier that...

  5. Major safety provisions in nuclear-powered ships

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Khlopkin, N.S.; Belyaev, V.M.; Dubrovin, A.M.

    1984-12-01

    Considerable experience has been accumulated in the Soviet Union on the design, construction and operation of nuclear-powered civilian ships: the icebreakers Lenin, Leonid Brezhnev and Sibir. The nuclear steam plants (NSP) used on these as the main energy source have been found to be highly reliable and safe, and it is desirable to use them in the future not only in icebreakers but also in transport ships for use in ice fields. The Soviet program for building and developing nuclear-powered ships has involved careful attention to safety in ships containing NSP. The experience with the design and operation of nuclearmore » icebreakers in recent years has led to the revision of safety standards for the nuclear ships and correspondingly ship NSP and international guidelines have been developed. If one meets the requirements as set forth in these documents, one has a safe basis for future Soviet nuclear-powered ships. The primary safety provisions for NSP are presented in this paper.« less

  6. Safety and Health Training Resources.

    ERIC Educational Resources Information Center

    Federal Safety Advisory Council, Washington, DC.

    Information obtained from a survey of safety and health training activities undertaken by Federal agencies is provided in the document which serves as a resource guide and directory of agency safety programs. The document, intended to help Federal managers meet their safety training needs with available government resources, is divided into four…

  7. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  8. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  9. 14 CFR Appendix B of Part 415 - Safety Review Document Outline

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

  10. 49 CFR 591.6 - Documents accompanying declarations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) IMPORTATION OF VEHICLES AND EQUIPMENT SUBJECT TO FEDERAL SAFETY, BUMPER AND THEFT PREVENTION STANDARDS § 591.6 Documents accompanying... public roads, or that the equipment item was not manufactured for use on a motor vehicle or is not an...

  11. Fluor Daniel Hanford contract standards/requirements identification document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bennett, G.L.

    1997-04-24

    This document, the Standards/Requirements Identification Document (S/RID) for the Fluor Daniel Hanford Contract, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment.

  12. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  13. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  14. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  15. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  16. 46 CFR 154.9 - Issuance of documents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Issuance of documents. 154.9 Section 154.9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.9 Issuance of documents. The...

  17. [Hazardous materials and work safety in veterinary practice. 1: Hazardous material definition and characterization, practice documentation and general rules for handling].

    PubMed

    Sliwinski-Korell, A; Lutz, F

    1998-04-01

    In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material is given and the potential risks are mentioned. The correct documentation regarding the protection of the purchase, storage, working conditions and removal of hazardous material and of the personal is explained. General rules for the handling of hazardous material are described. In part 2, particular emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gas, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references is also given.

  18. 47 CFR 90.1 - Basis and purpose.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... licensed and used in the Public Safety, Industrial/Business Radio Pool, and Radiolocation Radio Services... 47 Telecommunication 5 2011-10-01 2011-10-01 false Basis and purpose. 90.1 Section 90.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND...

  19. 47 CFR 90.1 - Basis and purpose.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... licensed and used in the Public Safety, Industrial/Business Radio Pool, and Radiolocation Radio Services... 47 Telecommunication 5 2014-10-01 2014-10-01 false Basis and purpose. 90.1 Section 90.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND...

  20. 47 CFR 90.1 - Basis and purpose.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... licensed and used in the Public Safety, Industrial/Business Radio Pool, and Radiolocation Radio Services... 47 Telecommunication 5 2013-10-01 2013-10-01 false Basis and purpose. 90.1 Section 90.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND...

  1. 47 CFR 90.1 - Basis and purpose.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... licensed and used in the Public Safety, Industrial/Business Radio Pool, and Radiolocation Radio Services... 47 Telecommunication 5 2012-10-01 2012-10-01 false Basis and purpose. 90.1 Section 90.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND...

  2. TWRS configuration management requirement source document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vann, J.M.

    The TWRS Configuration Management (CM) Requirement Source document prescribes CM as a basic product life-cycle function by which work and activities are conducted or accomplished. This document serves as the requirements basis for the TWRS CM program. The objective of the TWRS CM program is to establish consistency among requirements, physical/functional configuration, information, and documentation for TWRS and TWRS products, and to maintain this consistency throughout the life-cycle of TWRS and the product, particularly as changes are being made.

  3. School Safety and Security.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    This document offers additional guidelines for school facilities in California in the areas of safety and security, lighting, and cleanliness. It also offers a description of technology resources available on the World Wide Web. On the topic of safety and security, the document offers guidelines in the areas of entrances, doors, and controlled…

  4. Technical documentation challenges in aviation maintenance : a proceedings report.

    DOT National Transportation Integrated Search

    2012-11-01

    The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

  5. 47 CFR 95.1400 - Basis and purpose.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Basis and purpose. 95.1400 Section 95.1400 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Personal Locator Beacons (PLB). § 95.1400 Basis and purpose. The rules in this subpart are...

  6. 2001 Safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2001-08-01

    The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. It also documented the lo...

  7. Safety policy and requirements for payloads using the Space Transportation System (STS)

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The Space Transportation Operations (STO) safety policy is to minimize STO involvement in the payload and its GSE (ground support equipment) design process while maintaining the assurance of a safe operation. Requirements for assuring payload mission success are the responsibility of the payload organization and are beyond the scope of this document. The intent is to provide the overall safety policies and requirements while allowing for negotiation between the payload organization and the STO operator in the method of implementation of payload safety. This revision provides for a relaxation in the monitoring requirements for inhibits, allows the payload organization to pursue design options and reflects, additionally, some new requirements. As of the issue date of this NHB, payloads which have completed the formal safety assessment reviews of their preliminary design on the basis of the May 1979 issue will be reassessed for compliance with the above changes.

  8. 9 CFR 592.24 - Basis of service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Basis of service. 592.24 Section 592.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS General § 592.24 Basis of service. (a) Products...

  9. [Written information for patients: From papers to documents].

    PubMed

    Cortés-Criado, M C

    2014-01-01

    There is a high variability in the level of information intended for patients, with different content, format and presentation. To determine the perceived safety of the patients treated at the Country Hospital of Melilla (HCML) and to assess the quality of the documents using criteria adapted to the «International Patient Decision Aid Standards» (IPDAS). Descriptive study of the documents given to patients by the HCML. They included questionnaires on perceived safety, classification of the documents, and the level of adherence to the IPDAS criteria. The Information given to patients during their stay in the HCML, their participation in decision-making, and the information about medication, did not exceed the average on the acceptance scale. Only 40 documents were studied (of the 131 collected), on being published in-house, and were classified, following the definitions of the RAE, into instructions (20), recommendations (14) and guidelines (6). Of these, only the 27.5% showed hospital logo. In the content analysis according to the IPDAS criteria, there was an overall adherence rate of 24.1% in instructions, 24.8% in recommendations, and 61.5% in guidelines. The perception of patient safety expressed in the questionnaire, and its assessment according IPDAS criteria, shows there may be a significant improvement within the organization. Furthermore, the quality of patient documentation provided can help decision making. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

  10. Photovoltaic system criteria documents. Volume 5: Safety criteria for photovoltaic applications

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1979-01-01

    Methodology is described for determining potential safety hazards involved in the construction and operation of photovoltaic power systems and provides guidelines for the implementation of safety considerations in the specification, design and operation of photovoltaic systems. Safety verification procedures for use in solar photovoltaic systems are established.

  11. EHR Documentation: The Hype and the Hope for Improving Nursing Satisfaction and Quality Outcomes.

    PubMed

    OʼBrien, Ann; Weaver, Charlotte; Settergren, Theresa Tess; Hook, Mary L; Ivory, Catherine H

    2015-01-01

    The phenomenon of "data rich, information poor" in today's electronic health records (EHRs) is too often the reality for nursing. This article proposes the redesign of nursing documentation to leverage EHR data and clinical intelligence tools to support evidence-based, personalized nursing care across the continuum. The principles consider the need to optimize nurses' documentation efficiency while contributing to knowledge generation. The nursing process must be supported by EHRs through integration of best care practices: seamless workflows that display the right tools, evidence-based content, and information at the right time for optimal clinical decision making. Design of EHR documentation must attain a balance that ensures the capture of nursing's impact on safety, quality, highly reliable care, patient engagement, and satisfaction, yet minimizes "death by data entry." In 2014, a group of diverse informatics leaders from practice, academia, and the vendor community formed to address how best to transform electronic documentation to provide knowledge at the point of care and to deliver value to front line nurses and nurse leaders. As our health care system moves toward reimbursement on the basis of quality outcomes and prevention, the value of nursing data in this business proposition will become a key differentiator for health care organizations' economic success.

  12. Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

    NASA Technical Reports Server (NTRS)

    Duarte, Alberto

    2007-01-01

    Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

  13. Tobacco document research reporting

    PubMed Central

    Carter, S

    2005-01-01

    Design: Interpretive analysis of published research. Sample: 173 papers indexed in Medline between 1995 and 2004 that cited tobacco industry documents. Analysis: Information about year published, journal and author, and a set of codes relating to methods reporting, were managed in N*Vivo. This coding formed the basis of an interpretation of tobacco document research reporting. Results: Two types of papers were identified. The first used tobacco documents as the primary data source (A-papers). The second was dedicated to another purpose but cited a small number of documents (B-papers). In B-papers documents were used either to provide a specific example or to support an expansive contention. A-papers contained information about purpose, sources, searching, analysis, and limitations that differed by author and journal and over time. A-papers had no clear methodological context, but used words from three major traditions—interpretive research, positivist research, and history—to describe analysis. Interpretation: A descriptive mainstream form of tobacco document reporting is proposed, initially typical but decreasing, and a continuum of positioning of the researcher, from conduit to constructor. Reporting practices, particularly from experienced researchers, appeared to evolve towards researcher as constructor, with later papers showing more complex purposes, diverse sources, and detail of searching and analysis. Tobacco document research could learn from existing research traditions: a model for planning and evaluating tobacco document research is presented. PMID:16319359

  14. Automated documentation generator for advanced protein crystal growth

    NASA Technical Reports Server (NTRS)

    Maddux, Gary A.; Provancha, Anna; Chattam, David

    1994-01-01

    To achieve an environment less dependent on the flow of paper, automated techniques of data storage and retrieval must be utilized. This software system, 'Automated Payload Experiment Tool,' seeks to provide a knowledge-based, hypertext environment for the development of NASA documentation. Once developed, the final system should be able to guide a Principal Investigator through the documentation process in a more timely and efficient manner, while supplying more accurate information to the NASA payload developer. The current system is designed for the development of the Science Requirements Document (SRD), the Experiment Requirements Document (ERD), the Project Plan, and the Safety Requirements Document.

  15. 9 CFR 592.24 - Basis of service.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Basis of service. 592.24 Section 592.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS General § 592.24 Basis of service. (a) Products shall be inspected in accordance with such...

  16. 9 CFR 592.24 - Basis of service.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Basis of service. 592.24 Section 592.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS General § 592.24 Basis of service. (a) Products shall be inspected in accordance with such...

  17. 9 CFR 592.24 - Basis of service.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Basis of service. 592.24 Section 592.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS General § 592.24 Basis of service. (a) Products shall be inspected in accordance with such...

  18. 9 CFR 592.24 - Basis of service.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Basis of service. 592.24 Section 592.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS General § 592.24 Basis of service. (a) Products shall be inspected in accordance with such...

  19. Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

    ERIC Educational Resources Information Center

    MacDonald, Wayne, Comp.; And Others

    Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

  20. PARFUME Theory and Model basis Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Darrell L. Knudson; Gregory K Miller; G.K. Miller

    2009-09-01

    The success of gas reactors depends upon the safety and quality of the coated particle fuel. The fuel performance modeling code PARFUME simulates the mechanical, thermal and physico-chemical behavior of fuel particles during irradiation. This report documents the theory and material properties behind vari¬ous capabilities of the code, which include: 1) various options for calculating CO production and fission product gas release, 2) an analytical solution for stresses in the coating layers that accounts for irradiation-induced creep and swelling of the pyrocarbon layers, 3) a thermal model that calculates a time-dependent temperature profile through a pebble bed sphere or amore » prismatic block core, as well as through the layers of each analyzed particle, 4) simulation of multi-dimensional particle behavior associated with cracking in the IPyC layer, partial debonding of the IPyC from the SiC, particle asphericity, and kernel migration (or amoeba effect), 5) two independent methods for determining particle failure probabilities, 6) a model for calculating release-to-birth (R/B) ratios of gaseous fission products that accounts for particle failures and uranium contamination in the fuel matrix, and 7) the evaluation of an accident condition, where a particle experiences a sudden change in temperature following a period of normal irradiation. The accident condi¬tion entails diffusion of fission products through the particle coating layers and through the fuel matrix to the coolant boundary. This document represents the initial version of the PARFUME Theory and Model Basis Report. More detailed descriptions will be provided in future revisions.« less

  1. Simulant Basis for the Standard High Solids Vessel Design

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Peterson, Reid A.; Fiskum, Sandra K.; Suffield, Sarah R.

    The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. Themore » simulant recipes that meet this basis will be provided in a subsequent document.« less

  2. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  3. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  4. 10 CFR 34.89 - Location of documents and records.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

  5. AP1000{sup R} nuclear power plant safety overview for spent fuel cooling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gorgemans, J.; Mulhollem, L.; Glavin, J.

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe class pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and costs. The AP1000 design uses passive features to mitigate design basis accidents. The passive safety systems are designed to function without safety-grade support systems such as AC power, component cooling water, service water or HVAC. Furthermore, these passive features 'fail safe' during a non-LOCA event such that DC power and instrumentation are not required. The AP1000 also has simple, active, defense-in-depth systems to support normal plant operations. These active systems provide the first levelmore » of defense against more probable events and they provide investment protection, reduce the demands on the passive features and support the probabilistic risk assessment. The AP1000 passive safety approach allows the plant to achieve and maintain safe shutdown in case of an accident for 72 hours without operator action, meeting the expectations provided in the U.S. Utility Requirement Document and the European Utility Requirements for passive plants. Limited operator actions are required to maintain safe conditions in the spent fuel pool via passive means. In line with the AP1000 approach to safety described above, the AP1000 plant design features multiple, diverse lines of defense to ensure spent fuel cooling can be maintained for design-basis events and beyond design-basis accidents. During normal and abnormal conditions, defense-in-depth and other systems provide highly reliable spent fuel pool cooling. They rely on off-site AC power or the on-site standby diesel generators. For unlikely design basis events with an extended loss of AC power (i.e., station blackout) or loss of heat sink or both, spent fuel cooling can still be provided indefinitely: - Passive systems, requiring minimal or no operator actions, are sufficient for at least 72 hours under all

  6. Guidance on health effects of toxic chemicals. Safety Analysis Report Update Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Foust, C.B.; Griffin, G.D.; Munro, N.B.

    1994-02-01

    Martin Marietta Energy Systems, Inc. (MMES), and Martin Marietta Utility Services, Inc. (MMUS), are engaged in phased programs to update the safety documentation for the existing US Department of Energy (DOE)-owned facilities. The safety analysis of potential toxic hazards requires a methodology for evaluating human health effects of predicted toxic exposures. This report provides a consistent set of health effects and documents toxicity estimates corresponding to these health effects for some of the more important chemicals found within MMES and MMUS. The estimates are based on published toxicity information and apply to acute exposures for an ``average`` individual. The healthmore » effects (toxicological endpoints) used in this report are (1) the detection threshold; (2) the no-observed adverse effect level; (3) the onset of irritation/reversible effects; (4) the onset of irreversible effects; and (5) a lethal exposure, defined to be the 50% lethal level. An irreversible effect is defined as a significant effect on a person`s quality of life, e.g., serious injury. Predicted consequences are evaluated on the basis of concentration and exposure time.« less

  7. 76 FR 411 - Regulatory Guidance Concerning Electronic Signatures and Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... Concerning Electronic Signatures and Documents AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of regulatory guidance. SUMMARY: FMCSA issues regulatory guidance concerning the... regulatory guidance concerning the use of electronic signatures and documents to comply with FMCSA...

  8. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.; Baggs, Rhoda

    2007-01-01

    Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

  9. Characterisation of Liquefaction Effects for Beyond-Design Basis Safety Assessment of Nuclear Power Plants

    NASA Astrophysics Data System (ADS)

    Bán, Zoltán; Győri, Erzsébet; János Katona, Tamás; Tóth, László

    2015-04-01

    -tree procedure. Earlier studies have shown that the potentially liquefiable layer at Paks Nuclear Power Plant is situated in relatively large depth. Therefore the applicability and adequacy of the methods at high overburden pressure is important. In case of existing facilities, the geotechnical data gained before construction aren't sufficient for the comprehensive liquefaction analysis. Performance of new geotechnical survey is limited. Consequently, the availability of the data has to be accounted while selection the analysis methods. Considerations have to be made for dealing with aleatory uncertainty related to the knowledge of the soil conditions. It is shown in the paper, a careful comparison and analysis of the results obtained by different methodologies provides the basis of the selection of practicable methods for the safety analysis of nuclear power plant for beyond design basis liquefaction hazard.

  10. Dutch pedestrian safety research review

    DOT National Transportation Integrated Search

    1999-12-01

    This report is one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration to document pedestrian safety in other countries. This report reviews recent pedestrian safety research in the Netherlands. It addre...

  11. SafetyAnalyst Testing and Implementation

    DOT National Transportation Integrated Search

    2009-03-01

    SafetyAnalyst is a software tool developed by the Federal Highway Administration to assist state and local transportation agencies on analyzing safety data and managing their roadway safety programs. This research report documents the major tasks acc...

  12. 29 CFR 2204.203 - Documentation of fees and expenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Documentation of fees and expenses. 2204.203 Section 2204.203 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN PROCEEDINGS BEFORE THE OCCUPATIONAL SAFETY AND HEALTH REVIEW...

  13. 29 CFR 2204.301 - Filing and service of documents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Filing and service of documents. 2204.301 Section 2204.301 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN PROCEEDINGS BEFORE THE OCCUPATIONAL SAFETY AND HEALTH REVIEW...

  14. 77 FR 31724 - Production Measurement Documents Incorporated by Reference; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement 30 CFR Part 250 [Docket ID: BSEE-2012-0003] RIN 1014-AA01 Production Measurement Documents Incorporated by Reference; Correction AGENCY: Bureau of Safety and Environmental Enforcement (BSEE), Interior. ACTION: Correcting...

  15. Canadian research on pedestrian safety

    DOT National Transportation Integrated Search

    1999-12-01

    This report is one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration to document pedestrian safety in other countries. This report reviews Canadian research in six areas of pedestrian safety: (1) Inter...

  16. Comprehensive Safety Analysis 2010 Safety Measurement System (SMS) Methodology, Version 2.1 Revised December 2010

    DOT National Transportation Integrated Search

    2010-12-01

    This report documents the Safety Measurement System (SMS) methodology developed to support the Comprehensive Safety Analysis 2010 (CSA 2010) Initiative for the Federal Motor Carrier Safety Administration (FMCSA). The SMS is one of the major tools for...

  17. Transportation safety data and analysis : Volume 2, Calibration of the highway safety manual and development of new safety performance functions.

    DOT National Transportation Integrated Search

    2011-03-01

    This report documents the calibration of the Highway Safety Manual (HSM) safety performance function (SPF) : for rural two-lane two-way roadway segments in Utah and the development of new models using negative : binomial and hierarchical Bayesian mod...

  18. System theory and safety models in Swedish, UK, Dutch and Australian road safety strategies.

    PubMed

    Hughes, B P; Anund, A; Falkmer, T

    2015-01-01

    Road safety strategies represent interventions on a complex social technical system level. An understanding of a theoretical basis and description is required for strategies to be structured and developed. Road safety strategies are described as systems, but have not been related to the theory, principles and basis by which systems have been developed and analysed. Recently, road safety strategies, which have been employed for many years in different countries, have moved to a 'vision zero', or 'safe system' style. The aim of this study was to analyse the successful Swedish, United Kingdom and Dutch road safety strategies against the older, and newer, Australian road safety strategies, with respect to their foundations in system theory and safety models. Analysis of the strategies against these foundations could indicate potential improvements. The content of four modern cases of road safety strategy was compared against each other, reviewed against scientific systems theory and reviewed against types of safety model. The strategies contained substantial similarities, but were different in terms of fundamental constructs and principles, with limited theoretical basis. The results indicate that the modern strategies do not include essential aspects of systems theory that describe relationships and interdependencies between key components. The description of these strategies as systems is therefore not well founded and deserves further development. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. 14 CFR 417.103 - Safety organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 417.103 Section 417... OF TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.103 Safety organization. (a) A launch operator must maintain and document a safety organization. A launch operator must...

  20. 75 FR 45678 - Notice of Availability of Interim Staff Guidance Document for Fuel Cycle Facilities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... Document for Fuel Cycle Facilities AGENCY: Nuclear Regulatory Commission. ACTION: Notice of availability..., Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety and Safeguards, U.S... Commission (NRC) prepares and issues Interim Staff Guidance (ISG) documents for fuel cycle facilities. These...

  1. Clinical decision support improves quality of telephone triage documentation--an analysis of triage documentation before and after computerized clinical decision support.

    PubMed

    North, Frederick; Richards, Debra D; Bremseth, Kimberly A; Lee, Mary R; Cox, Debra L; Varkey, Prathibha; Stroebel, Robert J

    2014-03-20

    Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS can improve documentation, further study is needed

  2. Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DAVIS, S.J.

    2000-05-25

    This document identifies critical characteristics of components to be dedicated for use in Safety Class (SC) or Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common radiation area monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF), in safety class, safety significant systems. System modifications are to be performed in accordance with the instructions provided on ECN 658230. Components for this change are commercially available and interchangeablemore » with the existing alarm configuration This document focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

  3. 34 CFR 300.311 - Specific documentation for the eligibility determination.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Learning Disabilities § 300.311 Specific documentation for the eligibility determination. (a) For a child suspected of having a specific learning disability, the documentation of the determination of eligibility... learning disability; (2) The basis for making the determination, including an assurance that the...

  4. 34 CFR 300.311 - Specific documentation for the eligibility determination.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Specific Learning Disabilities § 300.311 Specific documentation for the eligibility determination. (a) For a child suspected of having a specific learning disability, the documentation of the determination... has a specific learning disability; (2) The basis for making the determination, including an assurance...

  5. [Patient safety in home care - A review of international recommendations].

    PubMed

    Czakert, Judith; Lehmann, Yvonne; Ewers, Michael

    2018-06-08

    In recent years there has been a growing trend towards nursing care at home in general as well as towards intensive home care being provided by specialized home care services in Germany. However, resulting challenges for patient safety have rarely been considered. Against this background we aimed to explore whether international recommendations for patient safety in home care in general and in intensive home care in particular already exist and how they can stimulate further practice development in Germany. A review of online English documents containing recommendations for patient safety in intensive home care was conducted. Available documents were analyzed and compared in terms of their form and content. Overall, a small number of relevant documents could be identified. None of these documents exclusively refer to the intensive home care sector. Despite their differences, however, the analysis of four selected documents showed similarities, e. g., regarding specific topics of patient safety (communication, involvement of patients and their relatives, risk assessment, medication management, qualification). Furthermore, strengths and weaknesses of the documents became apparent: e. g., an explicit understanding of patient safety, a literature-based introduction to safety topics or an adaptation of the recommendations to the specific features of home care were occasionally lacking. This document analysis provides interesting input to the formal and content-related development of specific recommendations and to practice development in Germany to improve patient safety in home care. Copyright © 2018. Published by Elsevier GmbH.

  6. [Disease management programs in Germany: Validity of the medical documentation].

    PubMed

    Linder, R; Horenkamp-Sonntag, D; Engel, S; Köppel, D; Heilmann, T; Verheyen, F

    2014-01-01

    The specific documentation for disease management programs (DMP) in Germany with respect to § 137 Social Code Book V is the basis for evaluating the DMP. DMP run up costs of the order of a billion euro without assessing evidence-based benefit so far. Aim of this study was to question if and to which extent this documentation may be suitable for reliable quality assurance in its present form. Data of nearly 300000 insured persons of a German Statutory Health Insurance (Techniker Krankenkasse, TK) which were continuously registered from July 1st 2009 until December 31st 2010 in a DMP were analyzed. We analyzed how items which were components of claims data and of DMP documentation were matched. With regard to prescriptions there were some considerable differences. Prescription of glibenclamid was documented twice as frequently in the DMP documentation compared to prescriptions filled in pharmacies. Only a fraction of emergency hospitalizations documented in the claims data were found in the DMP documentation. Investigations of the fundus oculi for diabetics are mentioned three times more frequently in the DMP documentation than they are accounted by ophthalmologists. There are considerable differences between claims data and DMP specific documentation. The latter shows a plainly reduced validity for investigated fields in the documentation forms. Reasons for this are manifold. Former evaluations of DM Ps carried out just on the basis of DMP documentation are thus highly questionable. Therefore, the DMPs themselves and their documentation have to be reformed. © Georg Thieme Verlag KG Stuttgart · New York.

  7. TWRS authorization basis configuration control summary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendoza, D.P.

    This document was developed to define the Authorization Basis management functional requirements for configuration control, to evaluate the management control systems currently in place, and identify any additional controls that may be required until the TWRS [Tank Waste Remediation System] Configuration Management system is fully in place.

  8. Medication safety.

    PubMed

    Keohane, Carol A; Bates, David W

    2008-03-01

    Patient safety is a state of mind, not a technology. The technologies used in the medical setting represent tools that must be properly designed, used well, and assessed on an on-going basis. Moreover, in all settings, building a culture of safety is pivotal for improving safety, and many nontechnologic approaches, such as medication reconciliation and teaching patients about their medications, are also essential. This article addresses the topic of medication safety and examines specific strategies being used to decrease the incidence of medication errors across various clinical settings.

  9. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  10. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  11. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  12. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  13. 14 CFR 415.115 - Flight safety.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

  14. Safety management vs. picking leaves.

    PubMed

    Wright, D

    1991-09-01

    A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

  15. Pedestrian safety in Australia

    DOT National Transportation Integrated Search

    1999-12-01

    This report was one in a series of pedestrian safety synthesis reports prepared for the Federal Highway : Administration (FHWA) to document pedestrian safety in other countries. Reports are also available for: : United Kingdom (FHWA-RD-99-089) : Cana...

  16. Pedestrian safety in Sweden

    DOT National Transportation Integrated Search

    1999-12-01

    This report was one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration (FHWA) to document pedestrian safety in other countries. Reports are also available for: : United Kingdom (FHWA-RD-99-089) : Canada...

  17. Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source.more » The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.« less

  18. 14 CFR 415.117 - Ground safety.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

  19. 14 CFR 415.117 - Ground safety.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

  20. Nuclear Safety

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silver, E G

    This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  1. A Synthetic Vision Preliminary Integrated Safety Analysis

    NASA Technical Reports Server (NTRS)

    Hemm, Robert; Houser, Scott

    2001-01-01

    This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

  2. Technical basis for implementation of remote reading capabilities for radiological control instruments at tank farms

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    PIERSON, R.M.

    1999-10-27

    This document provides the technical basis for use of remote reading capabilities with radiological control instruments at River Protection Project facilities. The purpose of this document is to evaluate applications of remote reading capabilities with Radiological Control instrumentation to allow continuous monitoring of radiation dose rates at River Protection Project (RPP) facilities. In addition this document provides a technical basis and implementing guidelines for remote monitoring of dose rates and their potential contribution to maintaining radiation exposures ALARA.

  3. 49 CFR 821.7 - Filing of documents with the Board.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., National Transportation Safety Board, 490 L'Enfant Plaza East SW., Washington, DC 20594, and addressed to... filed with the Office of General Counsel, National Transportation Safety Board, 490 L'Enfant Plaza East... upper left-hand corner by staple or clip, and shall not be bound or hole-punched. Any document failing...

  4. Geriatric Cyclists: Assessing Risks, Safety, and Benefits

    PubMed Central

    Ikpeze, Tochukwu C.; Glaun, Gabriel; McCalla, Daren

    2018-01-01

    Nearly 1 in every 3 Americans ride bicycles each year, but only 20% of the reported 100 million cyclists ride on a weekly basis. Bicycling is a common form of transportation and recreation and has gained popularity among the elderly patients. In recent years, the number of elderly cyclists has increased steadily and studies have cited ease of use, need for exercise, and enjoyment as important contributing factors. The benefits of physical activity on health is well-documented, and elderly individuals are encouraged to remain active to reduce the progression of age-related weakness and loss of muscle mass. Safety concerns, however, have been a prevalent public health issue. According to the Center for Disease Control and Prevention, elderly and teenage cyclists account for the highest number of head injuries and fatalities among all cyclists. Safety measures that include wearing protective gear such as helmets and choosing the appropriate bicycle have been recommended to minimize the risk of sustaining injuries while riding. Despite these concerns, bicycling has remained a popular and exciting activity for the elderly patients. PMID:29383267

  5. Technical Basis for PNNL Beryllium Inventory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Michelle Lynn

    2014-07-09

    The Department of Energy (DOE) issued Title 10 of the Code of Federal Regulations Part 850, “Chronic Beryllium Disease Prevention Program” (the Beryllium Rule) in 1999 and required full compliance by no later than January 7, 2002. The Beryllium Rule requires the development of a baseline beryllium inventory of the locations of beryllium operations and other locations of potential beryllium contamination at DOE facilities. The baseline beryllium inventory is also required to identify workers exposed or potentially exposed to beryllium at those locations. Prior to DOE issuing 10 CFR 850, Pacific Northwest Nuclear Laboratory (PNNL) had documented the beryllium characterizationmore » and worker exposure potential for multiple facilities in compliance with DOE’s 1997 Notice 440.1, “Interim Chronic Beryllium Disease.” After DOE’s issuance of 10 CFR 850, PNNL developed an implementation plan to be compliant by 2002. In 2014, an internal self-assessment (ITS #E-00748) of PNNL’s Chronic Beryllium Disease Prevention Program (CBDPP) identified several deficiencies. One deficiency is that the technical basis for establishing the baseline beryllium inventory when the Beryllium Rule was implemented was either not documented or not retrievable. In addition, the beryllium inventory itself had not been adequately documented and maintained since PNNL established its own CBDPP, separate from Hanford Site’s program. This document reconstructs PNNL’s baseline beryllium inventory as it would have existed when it achieved compliance with the Beryllium Rule in 2001 and provides the technical basis for the baseline beryllium inventory.« less

  6. Clinical decision support improves quality of telephone triage documentation - an analysis of triage documentation before and after computerized clinical decision support

    PubMed Central

    2014-01-01

    Background Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. Methods We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Results Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). Conclusions CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS

  7. 14 CFR 415.33 - Safety organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 415.33 Section 415.33... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch From a Federal Launch Range § 415.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by...

  8. Technical Basis Document for Internal Dosimetry at Sandia National Laboratories Revision 2.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Potter, Charles A.

    2014-09-01

    The RPID Project will be implemented at all SNL facilities for activities involving the processing and/or storing of radioactive materials. This project includes activities at the Tech Area (TA) I, TA II, TA III, TA IV, TA V, Coyote Test Field, and environmental restoration sites at SNL, located in Albuquerque, New Mexico, and the Kauai Test Facility(SNL/KTF). Reference to SNL throughout this document includes facilities and activities at the Albuquerque location and at SNL/KTF.

  9. 2003 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2003-08-01

    The objective of this study was to establish 2003 safety belt and child safety seat usage rates in Kentucky. The 2003 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

  10. 2004 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2004-08-01

    The objective of this study was to establish 2004 safety belt and child safety seat usage rates in Kentucky. The 2004 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

  11. Safety Guide for Health Occupations Programs.

    ERIC Educational Resources Information Center

    Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

    The handbook is intended to be utilized by health occupations teachers as supplementary instructional materials for a unit on safety. The document contains general safety rules applicable to hospitals and other health care institutions. Outlined are general rules for fire safety and office and clerical safety and more specific rules for the…

  12. Westinghouse Hanford Company (WHC) standards/requirements identification document (S/RID)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bennett, G.L.

    1996-03-15

    This Standards/Requirements Identification Document (S/RID) set forth the Environmental Safety and Health (ES&H) standards/requirements for Westinghouse Hanford Company Level Programs, where implementation and compliance is the responsibility of these organizations. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

  13. ISS Crew Transportation and Services Requirements Document

    NASA Technical Reports Server (NTRS)

    Lueders, Kathryn L. (Compiler)

    2015-01-01

    Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document with its sister documents, Crew Transportation Technical Management Processes (CCT-PLN-1120), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), and Crew Transportation Operations Standards (CCT-STD-1150), and International Space Station (ISS) to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase of the NASA Commercial Crew Program (CCP).

  14. Surgical Safety Training of World Health Organization Initiatives.

    PubMed

    Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

    2014-01-01

    Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

  15. The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

    PubMed

    Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

    2016-09-01

    Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

  16. 47 CFR 87.1 - Basis and purpose.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES... purpose for which this part is issued. (a) Basis. The rules for the aviation services in this part are... Regulations). (3) The Convention on International Civil Aviation—(ICAO Convention). (b) Purpose. This part...

  17. 2009 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2009-07-01

    The objective of this study was to establish 2009 safety belt and child safety seat usage rates in Kentucky. The 2009 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  18. 2002 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2002-07-01

    The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  19. 2001 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2001-08-01

    The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

  20. 14 CFR 415.33 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

  1. Level 2 Ancillary Products and Datasets Algorithm Theoretical Basis

    NASA Technical Reports Server (NTRS)

    Diner, D.; Abdou, W.; Gordon, H.; Kahn, R.; Knyazikhin, Y.; Martonchik, J.; McDonald, D.; McMuldroch, S.; Myneni, R.; West, R.

    1999-01-01

    This Algorithm Theoretical Basis (ATB) document describes the algorithms used to generate the parameters of certain ancillary products and datasets used during Level 2 processing of Multi-angle Imaging SpectroRadiometer (MIST) data.

  2. 2010 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2010-07-01

    The objective of this study was to establish 2010 safety belt and child safety seat usage rates in Kentucky. The 2010 survey continues to document the results after enactment of the original "second enforcement" statewide mandatory safety belt law in...

  3. 2007 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2007-08-01

    The objective of this study was to establish 2007 safety belt and child safety seat usage rates in Kentucky. The 2007 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  4. 2006 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2006-08-01

    The objective of this study was to establish 2006 safety belt and child safety seat usage rates in Kentucky. The 2006 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  5. 2008 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2008-08-01

    The objective of this study was to establish 2008 safety belt and child safety seat usage rates in Kentucky. The 2008 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  6. 2005 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2005-08-01

    The objective of this study was to establish 2005 safety belt and child safety seat usage rates in Kentucky. The 2005 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

  7. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  8. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  9. 10 CFR 835.901 - Radiation safety training.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

  10. Nuclear Criticality Safety Data Book

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hollenbach, D. F.

    The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

  11. Onboard Safety Systems/Trucking Industry Demographics.

    DOT National Transportation Integrated Search

    2016-11-01

    Research sponsored by the Federal Motor Carrier Safety Administration (FMCSA) in 2008 documented discrete : safety technology investment differences that exist across motor carrier fleet sizes. In response, this research : analyzed the use of onboard...

  12. ISS Crew Transportation and Services Requirements Document

    NASA Technical Reports Server (NTRS)

    Bayt, Robert L. (Compiler); Lueders, Kathryn L. (Compiler)

    2016-01-01

    The ISS Crew Transportation and Services Requirements Document (CCT-REQ-1130) contains all technical, safety, and crew health medical requirements that are mandatory for achieving a Crew Transportation System Certification that will allow for International Space Station delivery and return of NASA crew and limited cargo. Previously approved on TN23183.

  13. 14 CFR 431.33 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

  14. Database management systems for process safety.

    PubMed

    Early, William F

    2006-03-17

    Several elements of the process safety management regulation (PSM) require tracking and documentation of actions; process hazard analyses, management of change, process safety information, operating procedures, training, contractor safety programs, pre-startup safety reviews, incident investigations, emergency planning, and compliance audits. These elements can result in hundreds of actions annually that require actions. This tracking and documentation commonly is a failing identified in compliance audits, and is difficult to manage through action lists, spreadsheets, or other tools that are comfortably manipulated by plant personnel. This paper discusses the recent implementation of a database management system at a chemical plant and chronicles the improvements accomplished through the introduction of a customized system. The system as implemented modeled the normal plant workflows, and provided simple, recognizable user interfaces for ease of use.

  15. Overview of Design, Lifecycle, and Safety for Computer-Based Systems

    NASA Technical Reports Server (NTRS)

    Torres-Pomales, Wilfredo

    2015-01-01

    This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

  16. 2002 safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2002-07-01

    The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

  17. 2000 Safety belt usage survey in Kentucky

    DOT National Transportation Integrated Search

    2000-08-01

    The objective of this study was to establish 2000 safety belt and child safety seat usage rates in Kentucky. The 2000 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

  18. Interactive BIM-Enabled Safety Training Piloted in Construction Education

    ERIC Educational Resources Information Center

    Clevenger, Caroline; Lopez del Puerto, Carla; Glick, Scott

    2015-01-01

    This paper documents and assesses the development of a construction safety training module featuring interactive, BIM-enabled, 3D visualizations to test if such a tool can enhance safety training related to scaffolds. This research documents the technical challenges and the lessons learned through the development and administration of a prototype…

  19. 42 CFR 485.701 - Basis and scope.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Therapy and Speech-Language Pathology Services § 485.701 Basis and scope. This subpart implements section 1861(p)(4) of the Act, which— (a) Defines outpatient physical therapy and speech pathology services; (b... records; and (c) Authorizes the Secretary to establish by regulation other health and safety requirements...

  20. The Algorithm Theoretical Basis Document for the Derivation of Range and Range Distributions from Laser Pulse Waveform Analysis for Surface Elevations, Roughness, Slope, and Vegetation Heights

    NASA Technical Reports Server (NTRS)

    Brenner, Anita C.; Zwally, H. Jay; Bentley, Charles R.; Csatho, Bea M.; Harding, David J.; Hofton, Michelle A.; Minster, Jean-Bernard; Roberts, LeeAnne; Saba, Jack L.; Thomas, Robert H.; hide

    2012-01-01

    The primary purpose of the GLAS instrument is to detect ice elevation changes over time which are used to derive changes in ice volume. Other objectives include measuring sea ice freeboard, ocean and land surface elevation, surface roughness, and canopy heights over land. This Algorithm Theoretical Basis Document (ATBD) describes the theory and implementation behind the algorithms used to produce the level 1B products for waveform parameters and global elevation and the level 2 products that are specific to ice sheet, sea ice, land, and ocean elevations respectively. These output products, are defined in detail along with the associated quality, and the constraints, and assumptions used to derive them.

  1. Implicature, Pragmatics, and Documentation: A Comparative Study

    ERIC Educational Resources Information Center

    Wright, David

    2008-01-01

    This study investigates the link between the linguistic principles of implicature and pragmatics and software documentation. When implicatures are created in conversation or text, the listener or reader is required to fill in missing information not overtly stated. This information is usually filled in on the basis of previous knowledge or…

  2. 2011 Annual Criticality Safety Program Performance Summary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Andrea Hoffman

    fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL

  3. E-nursing documentation as a tool for quality assurance.

    PubMed

    Rajkovic, Vladislav; Sustersic, Olga; Rajkovic, Uros

    2006-01-01

    The article presents the results of a project with which we describe the reengineering of nursing documentation. Documentation in nursing is an efficient tool for ensuring quality health care and consequently quality patient treatment along the whole clinical path. We have taken into account the nursing process and patient treatment based on Henderson theoretical model of nursing that consists of 14 basic living activities. The model of new documentation enables tracing, transparency, selectivity, monitoring and analyses. All these factors lead to improvements of a health system as well as to improved safety of patients and members of nursing teams. Thus the documentation was developed for three health care segments: secondary and tertiary level, dispensaries and community health care. The new quality introduced to the documentation process by information and communication technology is presented by a database model and a software prototype for managing documentation.

  4. Repository of not readily available documents for project W-320

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Conner, J.C.

    1997-04-18

    The purpose of this document is to provide a readily available source of the technical reports needed for the development of the safety documentation provided for the waste retrieval sluicing system (WRSS), designed to remove the radioactive and chemical sludge from tank 241-C-106, and transport that material to double-shell tank 241-AY-102 via a new, temporary, shielded, encased transfer line.

  5. Safety Evaluation of Roundabouts in Georgia

    DOT National Transportation Integrated Search

    2018-02-28

    Several previous studies have documented significant safety benefits of roundabouts in the United Sates. However, the safety benefits for a given roundabout may vary depending on factors such as the familiarity of the driving population to roundabout...

  6. Safety Evaluation of Roundabouts in Georgia

    DOT National Transportation Integrated Search

    2018-02-02

    Several previous studies have documented significant safety benefits of roundabouts in the United Sates. However, the safety benefits for a given roundabout may vary depending on factors such as the familiarity of the driving population to roundabout...

  7. The Earth System Documentation (ES-DOC) project

    NASA Astrophysics Data System (ADS)

    Murphy, S.; Greenslade, M. A.; Treshansky, A.; DeLuca, C.; Guilyardi, E.; Denvil, S.

    2013-12-01

    Earth System Documentation (ES-DOC) is an international project supplying high quality tools and services in support of Earth system documentation creation, analysis and dissemination. It is nurturing a sustainable standards based documentation ecosystem that aims to become an integral part of the next generation of exa-scale dataset archives. ES-DOC leverages open source software, and applies a software development methodology that places end-user narratives at the heart of all it does. ES-DOC has initially focused upon nurturing the Earth System Model (ESM) documentation eco-system. Within this context ES-DOC leverages the emerging Common Information Model (CIM) metadata standard, which has supported the following projects: ** Coupled Model Inter-comparison Project Phase 5 (CMIP5); ** Dynamical Core Model Inter-comparison Project (DCMIP-2012); ** National Climate Predictions and Projections Platforms (NCPP) Quantitative Evaluation of Downscaling Workshop (QED-2013). This presentation will introduce the project to a wider audience and will demonstrate the current production level capabilities of the eco-system: ** An ESM documentation Viewer embeddable into any website; ** An ESM Questionnaire configurable on a project by project basis; ** An ESM comparison tool reusable across projects; ** An ESM visualization tool reusable across projects; ** A search engine for speedily accessing published documentation; ** Libraries for streamlining document creation, validation and publishing pipelines.

  8. Software Safety Progress in NASA

    NASA Technical Reports Server (NTRS)

    Radley, Charles F.

    1995-01-01

    NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

  9. Scalable ranked retrieval using document images

    NASA Astrophysics Data System (ADS)

    Jain, Rajiv; Oard, Douglas W.; Doermann, David

    2013-12-01

    Despite the explosion of text on the Internet, hard copy documents that have been scanned as images still play a significant role for some tasks. The best method to perform ranked retrieval on a large corpus of document images, however, remains an open research question. The most common approach has been to perform text retrieval using terms generated by optical character recognition. This paper, by contrast, examines whether a scalable segmentation-free image retrieval algorithm, which matches sub-images containing text or graphical objects, can provide additional benefit in satisfying a user's information needs on a large, real world dataset. Results on 7 million scanned pages from the CDIP v1.0 test collection show that content based image retrieval finds a substantial number of documents that text retrieval misses, and that when used as a basis for relevance feedback can yield improvements in retrieval effectiveness.

  10. Biology Laboratory Safety Manual.

    ERIC Educational Resources Information Center

    Case, Christine L.

    The Centers for Disease Control (CDC) recommends that schools prepare or adapt a biosafety manual, and that instructors develop a list of safety procedures applicable to their own lab and distribute it to each student. In this way, safety issues will be brought to each student's attention. This document is an example of such a manual. It contains…

  11. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with DOE Policy 450.2A, “Identifying, Implementing and Complying with Environment, Safety and Health..., safety, and health into work planning and execution (48 CFR 970.5223-1, Integration of Environment...) Using the method in DOE-STD-1120-98, Integration of Environment, Safety, and Health into Facility...

  12. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with DOE Policy 450.2A, “Identifying, Implementing and Complying with Environment, Safety and Health..., safety, and health into work planning and execution (48 CFR 970.5223-1, Integration of Environment...) Using the method in DOE-STD-1120-98, Integration of Environment, Safety, and Health into Facility...

  13. 10 CFR Appendix A to Subpart B of... - General Statement of Safety Basis Policy

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with DOE Policy 450.2A, “Identifying, Implementing and Complying with Environment, Safety and Health..., safety, and health into work planning and execution (48 CFR 970.5223-1, Integration of Environment...) Using the method in DOE-STD-1120-98, Integration of Environment, Safety, and Health into Facility...

  14. Forum for debate: Safety of allogeneic blood transfusion alternatives in the surgical/critically ill patient.

    PubMed

    Muñoz Gómez, M; Bisbe Vives, E; Basora Macaya, M; García Erce, J A; Gómez Luque, A; Leal-Noval, S R; Colomina, M J; Comin Colet, J; Contreras Barbeta, E; Cuenca Espiérrez, J; Garcia de Lorenzo Y Mateos, A; Gomollón García, F; Izuel Ramí, M; Moral García, M V; Montoro Ronsano, J B; Páramo Fernández, J A; Pereira Saavedra, A; Quintana Diaz, M; Remacha Sevilla, Á; Salinas Argente, R; Sánchez Pérez, C; Tirado Anglés, G; Torrabadella de Reinoso, P

    2015-12-01

    In recent years, several safety alerts have questioned or restricted the use of some pharmacological alternatives to allogeneic blood transfusion in established indications. In contrast, there seems to be a promotion of other alternatives, based on blood products and/or antifibrinolytic drugs, which lack a solid scientific basis. The Multidisciplinary Autotransfusion Study Group and the Anemia Working Group España convened a multidisciplinary panel of 23 experts belonging to different healthcare areas in a forum for debate to: 1) analyze the different safety alerts referred to certain transfusion alternatives; 2) study the background leading to such alternatives, the evidence supporting them, and their consequences for everyday clinical practice, and 3) issue a weighted statement on the safety of each questioned transfusion alternative, according to its clinical use. The members of the forum maintained telematics contact for the exchange of information and the distribution of tasks, and a joint meeting was held where the conclusions on each of the items examined were presented and discussed. A first version of the document was drafted, and subjected to 4 rounds of review and updating until consensus was reached (unanimously in most cases). We present the final version of the document, approved by all panel members, and hope it will be useful for our colleagues. Copyright © 2015 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

  15. Improving operating room safety

    PubMed Central

    2009-01-01

    Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety. PMID:19930577

  16. Multisource data fusion for documenting archaeological sites

    NASA Astrophysics Data System (ADS)

    Knyaz, Vladimir; Chibunichev, Alexander; Zhuravlev, Denis

    2017-10-01

    The quality of archaeological sites documenting is of great importance for cultural heritage preserving and investigating. The progress in developing new techniques and systems for data acquisition and processing creates an excellent basis for achieving a new quality of archaeological sites documenting and visualization. archaeological data has some specific features which have to be taken into account when acquiring, processing and managing. First of all, it is a needed to gather as full as possible information about findings providing no loss of information and no damage to artifacts. Remote sensing technologies are the most adequate and powerful means which satisfy this requirement. An approach to archaeological data acquiring and fusion based on remote sensing is proposed. It combines a set of photogrammetric techniques for obtaining geometrical and visual information at different scales and detailing and a pipeline for archaeological data documenting, structuring, fusion, and analysis. The proposed approach is applied for documenting of Bosporus archaeological expedition of Russian State Historical Museum.

  17. Laboratory Safety Guide for Arkansas K-12 Schools.

    ERIC Educational Resources Information Center

    Arkansas State Dept. of Education, Little Rock.

    This document presents laboratory safety rules for Arkansas K-12 schools which were developed by the Arkansas Science Teachers Association (ASTA) and the Arkansas Department of Education (ADE). Contents include: (1) "Laboratory Safety Guide for Arkansas K-12 Schools"; (2) "Safety Considerations"; (3) "Safety Standards for Science Laboratories";…

  18. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  19. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  20. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  1. 33 CFR 96.250 - What documents and reports must a safety management system have?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... about safety and environmental pollution; and(2) Ability to request the company's help when necessary... requirements (a) Safety and environmental policy statements (1) Meet the objectives of § 96.230; and(2) Are... and affecting the safety and pollution prevention operations of the company and vessel(s); and (4) A...

  2. Nuclear criticality safety evaluation of the passage of decontaminated salt solution from the ITP filters into tank 50H for interim storage

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hobbs, D.T.; Davis, J.R.

    This report assesses the nuclear criticality safety associated with the decontaminated salt solution after passing through the In-Tank Precipitation (ITP) filters, through the stripper columns and into Tank 50H for interim storage until transfer to the Saltstone facility. The criticality safety basis for the ITP process is documented. Criticality safety in the ITP filtrate has been analyzed under normal and process upset conditions. This report evaluates the potential for criticality due to the precipitation or crystallization of fissionable material from solution and an ITP process filter failure in which insoluble material carryover from salt dissolution is present. It is concludedmore » that no single inadvertent error will cause criticality and that the process will remain subcritical under normal and credible abnormal conditions.« less

  3. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-04-01

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining themore » facility and executing the mission of the High-Level Waste Storage Tank Farms.« less

  4. 33 CFR 96.350 - Interim Document of Compliance certificate: what is it and when can it be used?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Document of Compliance certificate may be issued to help set up a company's safety management system when— (1) A company is newly set up or in transition from an existing company into a new company; or (2) A new type of vessel is added to an existing safety management system and Document of Compliance...

  5. Laboratory Safety Manual for Alabama Schools. Bulletin 1975. No. 20.

    ERIC Educational Resources Information Center

    Alabama State Dept. of Education, Montgomery.

    This document presents the Alabama State Department of Education guidelines for science laboratory safety, equipment, storage, chemical safety, rocket safety, electrical safety, safety with radioisotopes, and safety with biologicals. Also included is a brief bibliography, a teacher's checklist, a listing of laser facts and regulations, and a…

  6. Child Transportation Safety Tips.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    This document presents nine tips regarding safe infant and child transportation, each tip explained in one to two pages. The tips are as follows: (1) quick safety seat checkup; (2) where should your child ride? (3) how to protect your new baby in the car; (4) what safety seat to use for a big baby or toddler? (5) how should preschool and school…

  7. 46 CFR 71.75-13 - Safety Management Certificate.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Safety Management Certificate. 71.75-13 Section 71.75-13... CERTIFICATION Certificates Under the International Convention for Safety of Life at Sea, 1960 § 71.75-13 Safety... valid Safety Management Certificate and a copy of their company's valid Document of Compliance...

  8. A Survey of Selected Document Processing Systems.

    ERIC Educational Resources Information Center

    Fong, Elizabeth

    In addition to reviewing the characteristics of document processing systems, this paper pays considerable attention to the description of a system via a feature list approach. The purpose of this report is to present features of the systems in parallel fashion to facilitate comparison so that a potential user may have a basis for evaluation in…

  9. Ward round template: enhancing patient safety on ward rounds.

    PubMed

    Gilliland, Niall; Catherwood, Natalie; Chen, Shaouyn; Browne, Peter; Wilson, Jacob; Burden, Helena

    2018-01-01

    Concerns had been raised at clinical governance regarding the safety of our inpatient ward rounds with particular reference to: documentation of clinical observations and National Early Warning Score (NEWS), compliance with Trust guidance for venous thromboembolism (VTE) risk assessment, antibiotic stewardship, palliative care and treatment escalation plans (TEP). This quality improvement project was conceived to ensure these parameters were considered and documented during the ward round, thereby improving patient care and safety. These parameters were based on Trust patient safety guidance and CQUIN targets. The quality improvement technique of plan-do-study-act (PDSA) was used in this project. We retrospectively reviewed ward round entries to record baseline measurements, based on the above described parameters, prior to making any changes. Following this, the change applied was the introduction of a ward round template to include the highlighted important baseline parameters. Monthly PDSA cycles are performed, and baseline measurements are re-examined, then relevant changes were made to the ward round template. Documentation of baseline measurements was poor prior to introduction of the ward round template; this improved significantly following introduction of a standardised ward round template. Following three cycles, documentation of VTE risk assessments increased from 14% to 92%. Antibiotic stewardship documentation went from 0% to 100%. Use of the TEP form went from 29% to 78%. Following introduction of the ward round template, compliance improved significantly in all safety parameters. Important safety measures being discussed on ward rounds will lead to enhanced patient safety and will improve compliance to Trust guidance and comissioning for quality and innovation (CQUIN) targets. Ongoing change implementation will focus on improving compliance with usage of the template on all urology ward rounds.

  10. Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

    DOE PAGES

    Di Maio, Francesco; Zio, Enrico; Smith, Curtis; ...

    2015-07-06

    The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less

  11. Electronics. Module 1: Electronic Safety. Instructor's Guide.

    ERIC Educational Resources Information Center

    Tharp, Bill

    This guide contains instructor's materials for a three-unit secondary school course on electronic safety. The units are shop safety principles, hand tools, and alternating current safety and protection devices. The document begins with advice on its use and a cross-referenced table of instructional materials that show which materials in the guide…

  12. Safety for Older Consumers. Home Safety Checklist.

    ERIC Educational Resources Information Center

    Consumer Product Safety Commission, Washington, DC.

    A home safety checklist geared to the needs of older adults is presented in this document. The beginning of the checklist highlights potential hazards which may need to be checked in more than one area of the home, such as electric cords, smoke detectors, rugs, telephone areas, and emergency exit plans. The rest of the checklist is organized…

  13. 10 CFR 830.203 - Unreviewed safety question process.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Unreviewed safety question process. 830.203 Section 830.203 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.203 Unreviewed safety question process. (a) The contractor responsible for a hazard category 1, 2, or 3 DOE...

  14. Employee Safety Motivation: perspectives and measures on the basis of the Self-Determination theory.

    PubMed

    Mariani, M G; Soldà, Bianca Lara; Curcuruto, M

    2015-09-09

    There is a growing body of literature demonstrating that employee's safety behaviour is largely influenced by their motivation to work safely. The Self-Determination Theory, which proposes a multidimensional conceptualization of motivation, is now established in various domains of the academic field (Healthcare, Education, Psychopathology, Organizations, Sport etc.). However, there are few publications concerning its use in the analysis of motivation in a safety context, where it constitutes a new topic of study. The aim of this study was to develop and validate the Italian version of the Self-Determined Safety Motivation Scale and analyze the psychometric properties of the scale in terms of construct validity. The research involved 387 Italian employees from three companies, who occupied medium-low levels in the organizational hierarchy. A good level of psychometric properties was shown. The Italian version of the Self-Determined Safety Motivation Scale is a reliable and valid instrument to assess safety motivation.

  15. E-documentation as a process management tool for nursing care in hospitals.

    PubMed

    Rajkovic, Uros; Sustersic, Olga; Rajkovic, Vladislav

    2009-01-01

    Appropriate documentation plays a key role in process management in nursing care. It includes holistic data management based on patient's data along the clinical path with regard to nursing care. We developed an e-documentation model that follows the process method of work in nursing care. It assesses the patient's status on the basis of Henderson's theoretical model of 14 basic living activities and is aligned with internationally recognized nursing classifications. E-documentation development requires reengineering of existing documentation and facilitates process reengineering. A prototype solution of an e-nursing documentation, already being in testing process at University medical centres in Ljubljana and Maribor, will be described.

  16. Safety in the Science Classroom

    ERIC Educational Resources Information Center

    Online Submission, 2006

    2006-01-01

    The goal of this K-12 science safety resource is to bring together information needed by administrators, planners, teachers and support staff to help them make sound decisions regarding science safety. The document identifies areas for decision making and action at a variety of levels. It supports planning and action by providing information on…

  17. Document similarity measures and document browsing

    NASA Astrophysics Data System (ADS)

    Ahmadullin, Ildus; Fan, Jian; Damera-Venkata, Niranjan; Lim, Suk Hwan; Lin, Qian; Liu, Jerry; Liu, Sam; O'Brien-Strain, Eamonn; Allebach, Jan

    2011-03-01

    Managing large document databases is an important task today. Being able to automatically com- pare document layouts and classify and search documents with respect to their visual appearance proves to be desirable in many applications. We measure single page documents' similarity with respect to distance functions between three document components: background, text, and saliency. Each document component is represented as a Gaussian mixture distribution; and distances between dierent documents' components are calculated as probabilistic similarities between corresponding distributions. The similarity measure between documents is represented as a weighted sum of the components' distances. Using this document similarity measure, we propose a browsing mechanism operating on a document dataset. For these purposes, we use a hierarchical browsing environment which we call the document similarity pyramid. It allows the user to browse a large document dataset and to search for documents in the dataset that are similar to the query. The user can browse the dataset on dierent levels of the pyramid, and zoom into the documents that are of interest.

  18. Motorcoach and school bus fire safety analysis.

    DOT National Transportation Integrated Search

    2016-11-01

    This report documents a motorcoach and school bus fire safety analysis performed by the John A. Volpe National Transportation Systems Center (Volpe) for the Federal Motor Carrier Safety Administration. This report aims to: 1) identify the causes, fre...

  19. Rural expressway intersection safety toolbox : desktop reference.

    DOT National Transportation Integrated Search

    2011-06-01

    This document is intended to be a guide for planning-level decisions concerning safety : issues and subsequent potential improvements at rural expressway intersections. It is : NOT a design guide. It simply presents the gamut of safety treatment opti...

  20. Imaged Document Optical Correlation and Conversion System (IDOCCS)

    NASA Astrophysics Data System (ADS)

    Stalcup, Bruce W.; Dennis, Phillip W.; Dydyk, Robert B.

    1999-03-01

    Today, the paper document is fast becoming a thing of the past. With the rapid development of fast, inexpensive computing and storage devices, many government and private organizations are archiving their documents in electronic form (e.g., personnel records, medical records, patents, etc.). In addition, many organizations are converting their paper archives to electronic images, which are stored in a computer database. Because of this, there is a need to efficiently organize this data into comprehensive and accessible information resources. The Imaged Document Optical Correlation and Conversion System (IDOCCS) provides a total solution to the problem of managing and retrieving textual and graphic information from imaged document archives. At the heart of IDOCCS, optical correlation technology provides the search and retrieval capability of document images. The IDOCCS can be used to rapidly search for key words or phrases within the imaged document archives and can even determine the types of languages contained within a document. In addition, IDOCCS can automatically compare an input document with the archived database to determine if it is a duplicate, thereby reducing the overall resources required to maintain and access the document database. Embedded graphics on imaged pages can also be exploited, e.g., imaged documents containing an agency's seal or logo, or documents with a particular individual's signature block, can be singled out. With this dual capability, IDOCCS outperforms systems that rely on optical character recognition as a basis for indexing and storing only the textual content of documents for later retrieval.

  1. Analysis of microgravity space experiments Space Shuttle programmatic safety requirements

    NASA Technical Reports Server (NTRS)

    Terlep, Judith A.

    1996-01-01

    This report documents the results of an analysis of microgravity space experiments space shuttle programmatic safety requirements and recommends the creation of a Safety Compliance Data Package (SCDP) Template for both flight and ground processes. These templates detail the programmatic requirements necessary to produce a complete SCDP. The templates were developed from various NASA centers' requirement documents, previously written guidelines on safety data packages, and from personal experiences. The templates are included in the back as part of this report.

  2. Intelligent Document Gateway: A Service System Case Study and Analysis

    NASA Astrophysics Data System (ADS)

    Krishna, Vikas; Lelescu, Ana

    In today's fast paced world, it is necessary to process business ­documents expediently, accurately, and diligently. In other words, processing has to be fast, errors must be prevented (or caught and corrected quickly), and documents cannot be lost or misplaced. The failure to meet these criteria, depending on the type and purpose of the documents, can have serious business, legal, or safety consequences. In this paper, we evaluated a B2B order placement service system that allows clients to place orders for products and services over a network. We describe the order placement service before and after deploying the Intelligent Document Gateway (IDG), a document-centric business process automation technology from IBM Research. Using service science perspective and service systems frameworks, we provide an analysis of how IDG improved the value proposition for both the service providers and service clients.

  3. Semantic Metadata for Heterogeneous Spatial Planning Documents

    NASA Astrophysics Data System (ADS)

    Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

    2016-09-01

    Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  4. Baltimore-Washington Parkway, Maryland : traffic safety plan

    DOT National Transportation Integrated Search

    2015-06-01

    Over the past decade, a number of studies have documented the traffic safety issues on the National Park Services (NPS) portion of the Baltimore-Washington (B-W) Parkway. The Baltimore-Washington Parkway Traffic Safety Plan provides an action plan...

  5. DRI Model of the U.S. Economy -- Model Documentation

    EIA Publications

    1993-01-01

    Provides documentation on Data Resources, Inc., DRI Model of the U.S. Economy and the DRI Personal Computer Input/Output Model. It also describes the theoretical basis, structure and functions of both DRI models; and contains brief descriptions of the models and their equations.

  6. Recent findings relating to firefighter safety zones

    Treesearch

    Bret Butler; Russ Parsons; William Mell

    2015-01-01

    Designation of safety zones is a primary duty of all wildland firefighters. Unfortunately, information regarding what constitutes an adequate safety zone is inadequately defined. Measurements of energy release from wildland fires have been used to develop an empirically based safety zone guideline. The basis for this work is described here.

  7. Health and Safety Adoption from Use of a Risk Assessment Document on Irish Farms.

    PubMed

    McNamara, John; Griffin, Patrick; Kinsella, James; Phelan, James

    2017-01-01

    This article describes levels of implementation of occupational health and safety (OHS) controls on a sample of Irish farms following completion of a risk assessment document (RAD) made available as part of a statutory code of practice (COP) for the agriculture sector. The article describes the legislation mandating the COP and the operation of a prevention initiative (PI) among key stakeholders to develop and promote farmer use of the COP and RAD. RADs were collected for farmers (N = 475) and the number and type of OHS controls listed for action were tabulated. A farm audit of OHS standards and of implementation of controls listed for action in the RAD was undertaken among a randomly selected sample of farms (N = 94) where the RAD was completed. The study data indicates that farmers used the RAD to a limited extent, and that their focus in its use was on identifying physical rather than organizational controls. An association was found between farmers who actively implemented controls and positive OHS standards. Farm OHS standards were also associated with farmer attitude to OHS, farm enterprise, farmer age category, and work time needed to operate the farm. Overall, the study data suggests that standards of farm management are a crucial determinant of OHS standards. The study data also indicates that having knowledge of required OHS controls does not ensure implementation. Development of social learning in groups is considered as a significant means of increasing OHS farm adoption.

  8. Basis for Interim Operation for Fuel Supply Shutdown Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BENECKE, M.W.

    2003-02-03

    This document establishes the Basis for Interim Operation (BIO) for the Fuel Supply Shutdown Facility (FSS) as managed by the 300 Area Deactivation Project (300 ADP) organization in accordance with the requirements of the Project Hanford Management Contract procedure (PHMC) HNF-PRO-700, ''Safety Analysis and Technical Safety Requirements''. A hazard classification (Benecke 2003a) has been prepared for the facility in accordance with DOE-STD-1027-92 resulting in the assignment of Hazard Category 3 for FSS Facility buildings that store N Reactor fuel materials (303-B, 3712, and 3716). All others are designated Industrial buildings. It is concluded that the risks associated with the currentmore » and planned operational mode of the FSS Facility (uranium storage, uranium repackaging and shipment, cleanup, and transition activities, etc.) are acceptable. The potential radiological dose and toxicological consequences for a range of credible uranium storage building have been analyzed using Hanford accepted methods. Risk Class designations are summarized for representative events in Table 1.6-1. Mitigation was not considered for any event except the random fire event that exceeds predicted consequences based on existing source and combustible loading because of an inadvertent increase in combustible loading. For that event, a housekeeping program to manage transient combustibles is credited to reduce the probability. An additional administrative control is established to protect assumptions regarding source term by limiting inventories of fuel and combustible materials. Another is established to maintain the criticality safety program. Additional defense-in-depth controls are established to perform fire protection system testing, inspection, and maintenance to ensure predicted availability of those systems, and to maintain the radiological control program. It is also concluded that because an accidental nuclear criticality is not credible based on the low uranium

  9. Global Precipitation Measurement (GPM) Safety Inhibit Timeline Tool

    NASA Technical Reports Server (NTRS)

    Dion, Shirley

    2012-01-01

    The Global Precipitation Measurement (GPM) Observatory is a joint mission under the partnership by National Aeronautics and Space Administration (NASA) and the Japan Aerospace Exploration Agency (JAXA), Japan. The NASA Goddard Space Flight Center (GSFC) has the lead management responsibility for NASA on GPM. The GPM program will measure precipitation on a global basis with sufficient quality, Earth coverage, and sampling to improve prediction of the Earth's climate, weather, and specific components of the global water cycle. As part of the development process, NASA built the spacecraft (built in-house at GSFC) and provided one instrument (GPM Microwave Imager (GMI) developed by Ball Aerospace) JAXA provided the launch vehicle (H2-A by MHI) and provided one instrument (Dual-Frequency Precipitation Radar (DPR) developed by NTSpace). Each instrument developer provided a safety assessment which was incorporated into the NASA GPM Safety Hazard Assessment. Inhibit design was reviewed for hazardous subsystems which included the High Gain Antenna System (HGAS) deployment, solar array deployment, transmitter turn on, propulsion system release, GMI deployment, and DPR radar turn on. The safety inhibits for these listed hazards are controlled by software. GPM developed a "pathfinder" approach for reviewing software that controls the electrical inhibits. This is one of the first GSFC in-house programs that extensively used software controls. The GPM safety team developed a methodology to document software safety as part of the standard hazard report. As part of this process a new tool "safety inhibit time line" was created for management of inhibits and their controls during spacecraft buildup and testing during 1& Tat GSFC and at the Range in Japan. In addition to understanding inhibits and controls during 1& T the tool allows the safety analyst to better communicate with others the changes in inhibit states with each phase of hardware and software testing. The tool was very

  10. On the typography of flight-deck documentation

    NASA Technical Reports Server (NTRS)

    Degani, Asaf

    1992-01-01

    Many types of paper documentation are employed on the flight-deck. They range from a simple checklist card to a bulky Aircraft Flight Manual (AFM). Some of these documentations have typographical and graphical deficiencies; yet, many cockpit tasks such as conducting checklists, way-point entry, limitations and performance calculations, and many more, require the use of these documents. Moreover, during emergency and abnormal situations, the flight crews' effectiveness in combating the situation is highly dependent on such documentation; accessing and reading procedures has a significant impact on flight safety. Although flight-deck documentation are an important (and sometimes critical) form of display in the modern cockpit, there is a dearth of information on how to effectively design these displays. The object of this report is to provide a summary of the available literature regarding the design and typographical aspects of printed matter. The report attempts 'to bridge' the gap between basic research about typography, and the kind of information needed by designers of flight-deck documentation. The report focuses on typographical factors such as type-faces, character height, use of lower- and upper-case characters, line length, and spacing. Some graphical aspects such as layout, color coding, fonts, and character contrast are also discussed. In addition, several aspects of cockpit reading conditions such as glare, angular alignment, and paper quality are addressed. Finally, a list of recommendations for the graphical design of flight-deck documentation is provided.

  11. Transportation Safety Information Report : Second Quarter 1984

    DOT National Transportation Integrated Search

    1984-01-01

    The "Transportation Safety Information Report" is a compendium of selected national-level transportation safety statistics for all modes of transportation. The report presents and compares data on a monthly and quarterly basis for transportation fata...

  12. Transportation Safety Information Report : Second Quarter 1985

    DOT National Transportation Integrated Search

    1985-10-01

    The "Transportation Safety Information Report" is a compendium of selected national-level transportation safety statistics for all modes of transportation. The report presents and compares data on a monthly and quarterly basis for transportation fata...

  13. Implementation Procedure for STS Payloads, System Safety Requirements

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Guidelines and instructions for the implementation of the SP&R system safety requirements applicable to STS payloads are provided. The initial contact meeting with the payload organization and the subsequent safety reviews necessary to comply with the system safety requirements of the SP&R document are described. Waiver instructions are included for the cases in which a safety requirement cannot be met.

  14. [Pharmacological Basis for Therapeutics. Pharmacological Analysis of Summary of Product Characteristics (SPC) for Physicians].

    PubMed

    Lechat, Philippe

    2015-01-01

    The summary of product characteristics, the SPC, is the major annex document of Marketing Authorisation (MA) dossier for a medicine. This document is the reference document for health care professionnals since it contains all necessary and opposable information for its therapeutic use. The SPC is initially submitted by the MA applicant and deeply revised in details by regulatory authorities, the national agencies for national MA, and the European Medicine Agency (EMA) for the european centralized procedures. The SPC presents with 12 sections each one being divided into several paragraphs. Sections 1-3 present the name, dosage, qualitative and quantitative composition, the pharmaceutical form of the medicine. Section 4 contains all the clinical particulars: Therapeutic indications, posology and methods of administration, contra-indications, special warnings and precautions for use, interactions, impact on fertility, contraception, pregnancy, lactation, effects on ability to drive and use machines, undesirable effects and risk associated with overdose. Section 5 describes pharmacological properties (pharmacodynamics and pharmacokinetics) and preclinical safety data. Section 6 describes the pharmaceutical particulars: excipients, incompatibilities, shelf live, nature and content of container, special precautions for disposal. Sections 7-10 are administrative ones (date of MA, MA holder), sections 11 and 12 are specific to radiopharmaceuticals (dosimetry and modalities of preparation). SPC is available free of charge on national regulatory agency websites and on EMA website. Sections of SPC finally have to be considered as the pharmacological basis of therapeutic use for each medicine. © 2015 Société Française de Pharmacologie et de Thérapeutique.

  15. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  16. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  17. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  18. 10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Filing requirements for demands or requests for documents or testimony. 1707.203 Section 1707.203 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD TESTIMONY BY...) The Defense Nuclear Facilities Safety Board reserves the right to require additional information to...

  19. Mobile site safety review for the transuranic (TRU) waste characterization program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1996-11-01

    This Safety Review Document (SRD) applies to the Active/Passive Neutron Examination and Assay (APNEA) system installed on a Lockheed Martin Specialty Components, Inc., (Specialty Components) trailer. The APNEA is designed to perform nuclear waste drum assay. The purpose of this document is to describe the safety features of the APNEA system.

  20. The communicative construction of safety in wildland firefighting

    Treesearch

    Jody Jahn; Linda L. Putnam; Anne E. Black

    2012-01-01

    This document is a summary of a mixed methods dissertation that examined the communicative construction of safety in wildland firefighting. For the dissertation, I used a two-study mixed methods approach, examining the communicative accomplishment of safety from two perspectives: high reliability organizing (Weick, Sutcliffe, & Obstfeld, 1999), and safety climate (...

  1. Review of the Constellation Level II Safety, Reliability, and Quality Assurance (SR&QA) Requirements Documents during Participation in the Constellation Level II SR&QA Forum

    NASA Technical Reports Server (NTRS)

    Cameron, Kenneth D.; Gentz, Steven J.; Beil, Robert J.; Minute, Stephen A.; Currie, Nancy J.; Scott, Steven S.; Thomas, Walter B., III; Smiles, Michael D.; Schafer, Charles F.; Null, Cynthia H.; hide

    2009-01-01

    At the request of the Exploration Systems Mission Directorate (ESMD) and the Constellation Program (CxP) Safety, Reliability; and Quality Assurance (SR&QA) Requirements Director, the NASA Engineering and Safety Center (NESC) participated in the Cx SR&QA Requirements forum. The Requirements Forum was held June 24-26; 2008, at GRC's Plum Brook Facility. The forums purpose was to gather all stakeholders into a focused meeting to help complete the process of refining the CxP to refine its Level II SR&QA requirements or defining project-specific requirements tailoring. Element prime contractors had raised specific questions about the wording and intent of many requirements in areas they felt were driving costs without adding commensurate value. NESC was asked to provide an independent and thorough review of requirements that contractors believed were driving Program costs, by active participation in the forum. This document contains information from the forum.

  2. Introduction to LNG vehicle safety

    NASA Astrophysics Data System (ADS)

    Bratvold, Delma; Friedman, David; Chernoff, Harry; Farkhondehpay, Dariush; Comay, Claudia

    1994-03-01

    Basic information on the characteristics of liquefied natural gas (LNG) is assembled to provide an overview of safety issues and practices for the use of LNG vehicles. This document is intended for those planning or considering the use of LNG vehicles, including vehicle fleet owners and operators, public transit officials and boards, local fire and safety officials, manufacturers and distributors, and gas industry officials. Safety issues and mitigation measures that should be considered for candidate LNG vehicle projects are addressed.

  3. Querying Safety Cases

    NASA Technical Reports Server (NTRS)

    Denney, Ewen W.; Naylor, Dwight; Pai, Ganesh

    2014-01-01

    Querying a safety case to show how the various stakeholders' concerns about system safety are addressed has been put forth as one of the benefits of argument-based assurance (in a recent study by the Health Foundation, UK, which reviewed the use of safety cases in safety-critical industries). However, neither the literature nor current practice offer much guidance on querying mechanisms appropriate for, or available within, a safety case paradigm. This paper presents a preliminary approach that uses a formal basis for querying safety cases, specifically Goal Structuring Notation (GSN) argument structures. Our approach semantically enriches GSN arguments with domain-specific metadata that the query language leverages, along with its inherent structure, to produce views. We have implemented the approach in our toolset AdvoCATE, and illustrate it by application to a fragment of the safety argument for an Unmanned Aircraft System (UAS) being developed at NASA Ames. We also discuss the potential practical utility of our query mechanism within the context of the existing framework for UAS safety assurance.

  4. 14 CFR 417.103 - Safety organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 417.103 Section 417... organization. (a) A launch operator must maintain and document a safety organization. A launch operator must... within the launch operator's organization and between the launch operator and any federal launch range or...

  5. F14A System Safety Program Plan

    DTIC Science & Technology

    1981-09-03

    by block number) Electromagnetic Pulse (EMP) Safety Plans Test Program EMP Testing F14 Aircraft Plans 20 ABSTRACT (Continue on reverse side if...compromising completion of the required experimental tasks. This document addresses the safety aspect of performing an Electromagnetic Pulse (EMP) test

  6. Additional nuclear criticality safety calculations for small-diameter containers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hone, M.J.

    This report documents additional criticality safety analysis calculations for small diameter containers, which were originally documented in Reference 1. The results in Reference 1 indicated that some of the small diameter containers did not meet the criteria established for criticality safety at the Portsmouth facility (K{sub eff} +2{sigma}<.95) when modeled under various contingency assumptions of reflection and moderation. The calculations performed in this report reexamine those cases which did not meet the criticality safety criteria. In some cases, unnecessary conservatism is removed, and in other cases mass or assay limits are established for use with the respective containers.

  7. Electrical Safety: Safety and Health for Electrical Trades. Student Manual.

    ERIC Educational Resources Information Center

    Fowler, Thaddeus W.; Miles, Karen K.

    This document is designed to teach learners in secondary and postsecondary electrical trades courses to recognize, evaluate, and control hazards associated with electrical work, The manual's eight sections each include some or all of the following components: instructional text; definitions; case studies illustrating key safety considerations;…

  8. 14 CFR 415.131 - Flight safety system crew data.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety system crew data. 415.131... Launch Vehicle From a Non-Federal Launch Site § 415.131 Flight safety system crew data. (a) An applicant's safety review document must identify each flight safety system crew position and the role of that...

  9. Drinking-water-criteria document for phthalic acid esters (PAES). Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-08-01

    The document provides the health effects basis to be considered in establishing the MCLG. To achieve the objective, data on pharmacokinetics human exposure, acute and chronic toxicity to animals and humans, epidemiology and mechanisms of toxicity are evaluated for phthalic acid esters. Specific emphasis is placed on literature data providing dose-response information. Thus, while the literature search and evaluation performed in support of the document has been comprehensive, only the reports considered most pertinent in the derivation of the MCLG are cited in the document. The comprehensive literature data base in support of the document includes information published up tomore » 1986; however, more recent data may have been added during the review process.« less

  10. Connected commercial vehicles — retrofit safety device kit project : data acquisition system (DAS) documentation.

    DOT National Transportation Integrated Search

    2014-03-01

    Connected vehicle wireless data communications can enable safety applications that may reduce injuries and fatalities. Cooperative vehicle-to-vehicle (V2V) safety applications will be effective only if a high fraction of vehicles are equipped. Deploy...

  11. IRIS Toxicological Review and Summary Documents for Polybrominated Diphenyl Ethers

    EPA Science Inventory

    EPA has announced the release of four completed toxicologal reviews and summary documents following an independent peer review on the scientific basis supporting the human health hazard and dose-response assessments of four congeners of polybrominated diphenyl ethers: tetraBDE (B...

  12. Total safety management: An approach to improving safety culture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Blush, S.M.

    A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobylmore » nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair.« less

  13. 33 CFR 96.220 - What makes up a safety management system?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The safety management system must document the responsible person's— (1) Safety and pollution prevention...

  14. Usability and Safety in Electronic Medical Records Interface Design: A Review of Recent Literature and Guideline Formulation.

    PubMed

    Zahabi, Maryam; Kaber, David B; Swangnetr, Manida

    2015-08-01

    The objectives of this study were to (a) review electronic medical record (EMR) and related electronic health record (EHR) interface usability issues, (b) review how EMRs have been evaluated with safety analysis techniques along with any hazard recognition, and (c) formulate design guidelines and a concept for enhanced EMR interfaces with a focus on diagnosis and documentation processes. A major impact of information technology in health care has been the introduction of EMRs. Although numerous studies indicate use of EMRs to increase health care quality, there remain concerns with usability issues and safety. A literature search was conducted using Compendex, PubMed, CINAHL, and Web of Science databases to find EMR research published since 2000. Inclusion criteria included relevant English-language papers with subsets of keywords and any studies (manually) identified with a focus on EMR usability. Fifty studies met the inclusion criteria. Results revealed EMR and EHR usability problems to include violations of natural dialog, control consistency, effective use of language, effective information presentation, and customization principles as well as a lack of error prevention, minimization of cognitive load, and feedback. Studies focusing on EMR system safety made no objective assessments and applied only inductive reasoning methods for hazard recognition. On the basis of the identified usability problems and structure of safety analysis techniques, we provide EMR design guidelines and a design concept focused on the diagnosis process and documentation. The design guidelines and new interface concept can be used for prototyping and testing enhanced EMRs. © 2015, Human Factors and Ergonomics Society.

  15. Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DAVIS, S.J.

    2000-12-28

    This document identifies critical characteristics of components to be dedicated for use in Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common, radiation area, monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF) for use in safety significant systems. System modifications are to be performed in accordance with the approved design. Components for this change are commercially available and interchangeable with the existing alarm configuration This documentmore » focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

  16. 76 FR 5494 - Pipeline Safety: Mechanical Fitting Failure Reporting Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-01

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Safety: Mechanical Fitting Failure Reporting Requirements AGENCY: Pipeline and Hazardous Materials Safety... tightening. A widely accepted industry guidance document, Gas Pipeline Technical Committee (GPTC) Guide, does...

  17. 76 FR 10295 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-24

    ... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... framework for the nationwide public safety broadband network. This document considers and proposes... broadband networks operating in the 700 MHz band. This document addresses public safety broadband network...

  18. Laboratory Biosafety and Biosecurity Risk Assessment Technical Guidance Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Astuto-Gribble, Lisa M; Caskey, Susan Adele

    2014-07-01

    The purpose of this document is threefold: 1) to describe the laboratory bio safety and biosecurity risk assessment process and its conceptual framework; 2) provide detailed guidance and suggested methodologies on how to conduct a risk assessment; and 3) present some practical risk assessment process strategies using realistic laboratory scenarios.

  19. Vocabulary of aerospace safety terms pertaining to cryogenic safety, fires, explosions, and structure failure

    NASA Technical Reports Server (NTRS)

    Pelouch, J. J., Jr.; Mandel, G.; Ordin, P. M.

    1976-01-01

    This vocabulary listing characterizes the contents of over 10,000 documents of the NASA Aerospace Safety Research and Data Institute's (ASRDI) safety engineering collection. The ASRDI collection is now one of the series accessible on the NASA RECON data base. There are approximately 6,300 postable terms that describe literature in the areas of cryogenic fluid safety, specifically hydrogen, oxygen, liquified natural gas; fire and explosion technology; and the mechanics of structural failure. To facilitate the proper selection of information nonpostable, related and array terms have been included in this listing.

  20. Information Scanning and Processing at the Nuclear Safety Information Center.

    ERIC Educational Resources Information Center

    Parks, Celia; Julian, Carol

    This report is a detailed manual of the information specialist's duties at the Nuclear Safety Information Center. Information specialists scan the literature for documents to be reviewed, procure the documents (books, journal articles, reports, etc.), keep the document location records, and return the documents to the plant library or other…

  1. Font adaptive word indexing of modern printed documents.

    PubMed

    Marinai, Simone; Marino, Emanuele; Soda, Giovanni

    2006-08-01

    We propose an approach for the word-level indexing of modern printed documents which are difficult to recognize using current OCR engines. By means of word-level indexing, it is possible to retrieve the position of words in a document, enabling queries involving proximity of terms. Web search engines implement this kind of indexing, allowing users to retrieve Web pages on the basis of their textual content. Nowadays, digital libraries hold collections of digitized documents that can be retrieved either by browsing the document images or relying on appropriate metadata assembled by domain experts. Word indexing tools would therefore increase the access to these collections. The proposed system is designed to index homogeneous document collections by automatically adapting to different languages and font styles without relying on OCR engines for character recognition. The approach is based on three main ideas: the use of Self Organizing Maps (SOM) to perform unsupervised character clustering, the definition of one suitable vector-based word representation whose size depends on the word aspect-ratio, and the run-time alignment of the query word with indexed words to deal with broken and touching characters. The most appropriate applications are for processing modern printed documents (17th to 19th centuries) where current OCR engines are less accurate. Our experimental analysis addresses six data sets containing documents ranging from books of the 17th century to contemporary journals.

  2. Technology applications for traffic safety programs : a primer

    DOT National Transportation Integrated Search

    2008-09-01

    This document explores how emerging digital and communications technology can advance safety on the Nations highways. The range of technology described in this report is available or will be available in the near future to improve traffic safety. ...

  3. The Evolution of System Safety at NASA

    NASA Technical Reports Server (NTRS)

    Dezfuli, Homayoon; Everett, Chris; Groen, Frank

    2014-01-01

    The NASA system safety framework is in the process of change, motivated by the desire to promote an objectives-driven approach to system safety that explicitly focuses system safety efforts on system-level safety performance, and serves to unify, in a purposeful manner, safety-related activities that otherwise might be done in a way that results in gaps, redundancies, or unnecessary work. An objectives-driven approach to system safety affords more flexibility to determine, on a system-specific basis, the means by which adequate safety is achieved and verified. Such flexibility and efficiency is becoming increasingly important in the face of evolving engineering modalities and acquisition models, where, for example, NASA will increasingly rely on commercial providers for transportation services to low-earth orbit. A key element of this objectives-driven approach is the use of the risk-informed safety case (RISC): a structured argument, supported by a body of evidence, that provides a compelling, comprehensible and valid case that a system is or will be adequately safe for a given application in a given environment. The RISC addresses each of the objectives defined for the system, providing a rational basis for making informed risk acceptance decisions at relevant decision points in the system life cycle.

  4. Traffic safety for older people : 5-year plan.

    DOT National Transportation Integrated Search

    2013-12-01

    This document is intended to serve as the plan for National Highway Traffic Safety Administration activities to address traffic safety concerns of older people. Given the increasing proportion of older people in the population, NHTSA must work in con...

  5. MCPS School Safety & Security at a Glance 2011-2012

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2012

    2012-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  6. MCPS School Safety & Security at a Glance 2013-2014

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2014

    2014-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  7. MCPS School Safety & Security at a Glance 2012-2013

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2013

    2013-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents. Information is presented for each Montgomery County (Maryland) public school. While much of this…

  8. Open Source Patient-Controlled Analgesic Pump Requirements Documentation

    PubMed Central

    Larson, Brian R.; Hatcliff, John; Chalin, Patrice

    2014-01-01

    The dynamic nature of the medical domain is driving a need for continuous innovation and improvement in techniques for developing and assuring medical devices. Unfortunately, research in academia and communication between academics, industrial engineers, and regulatory authorities is hampered by the lack of realistic non-proprietary development artifacts for medical devices. In this paper, we give an overview of a detailed requirements document for a Patient-Controlled Analgesic (PCA) pump developed under the US NSF’s Food and Drug Administration (FDA) Scholar-in-Residence (SIR) program. This 60+ page document follows the methodology outlined in the US Federal Aviation Administrations (FAA) Requirements Engineering Management Handbook (REMH) and includes a domain overview, use cases, statements of safety & security requirements, and formal top-level system architectural description. Based on previous experience with release of a requirements document for a cardiac pacemaker that spawned a number of research and pedagogical activities, we believe that the described PCA requirements document can be an important research enabler within the formal methods and software engineering communities. PMID:24931440

  9. Advanced Air Transportation Technologies Project, Final Document Collection

    NASA Technical Reports Server (NTRS)

    Mogford, Richard H.; Wold, Sheryl (Editor)

    2008-01-01

    This CD ROM contains a compilation of the final documents of the Advanced Air Transportation Technologies (AAIT) project, which was an eight-year (1996 to 2004), $400M project managed by the Airspace Systems Program office, which was part of the Aeronautics Research Mission Directorate at NASA Headquarters. AAIT focused on developing advanced automation tools and air traffic management concepts that would help improve the efficiency of the National Airspace System, while maintaining or enhancing safety. The documents contained in the CD are final reports on AAIT tasks that serve to document the project's accomplishments over its eight-year term. Documents include information on: Advanced Air Transportation Technologies, Autonomous Operations Planner, Collaborative Arrival Planner, Distributed Air/Ground Traffic Management Concept Elements 5, 6, & 11, Direct-To, Direct-To Technology Transfer, Expedite Departure Path, En Route Data Exchange, Final Approach Spacing Tool - (Active and Passive), Multi-Center Traffic Management Advisor, Multi Center Traffic Management Advisor Technology Transfer, Surface Movement Advisor, Surface Management System, Surface Management System Technology Transfer and Traffic Flow Management Research & Development.

  10. Vehicle fires and fire safety in tunnels

    DOT National Transportation Integrated Search

    2002-09-20

    Tunnels present what is arguably the most hazardous environment, from the point of view of fire safety, that members of the public ever experience. The fire safety design of tunnels is carried out by tunnel engineers on the basis of a potential fire ...

  11. Urban and suburban arterial safety performance functions : final report.

    DOT National Transportation Integrated Search

    2016-06-30

    This report documents findings from a comprehensive set of safety performance functions developed for the entire urban-suburban : arterial road segment system on the state highway system in Washington. Conventional urban suburban safety performance :...

  12. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    NASA Technical Reports Server (NTRS)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  13. 76 FR 5537 - Electronic On-Board Recorders and Hours of Service Supporting Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-01

    ...The Federal Motor Carrier Safety Administration (FMCSA) proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to require certain motor carriers operating commercial motor vehicles (CMVs) in interstate commerce to use electronic on-board recorders (EOBRs) to document their drivers' hours of service (HOS). Under this proposal, all motor carriers currently required to maintain Records of Duty Status (RODS) for HOS recordkeeping would be required to use EOBRs to systematically and effectively monitor their drivers' compliance with HOS requirements. Additionally, this proposal sets forth the supporting documents that all motor carriers currently required to use RODS would still be required to obtain and keep, as required by section 113(a) of the Hazardous Materials Transportation Authorization Act (HMTAA). It explains, however, that although motor carriers subject to the proposed EOBR requirements would still need to retain some supporting documents, they would be relieved of the requirements to retain supporting documents to verify driving time. FMCSA also proposes to require all motor carriers--both RODS and timecard users--to systematically monitor their drivers' compliance with HOS requirements. Motor carriers would be given 3 years after the effective date of the final rule to comply with these requirements.

  14. 48 CFR 2913.106-3 - Soliciting competition, evaluation of quotations or offers, award and documentation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., evaluation of quotations or offers, award and documentation. 2913.106-3 Section 2913.106-3 Federal... Procedures 2913.106-3 Soliciting competition, evaluation of quotations or offers, award and documentation. In... responsive quotation from a responsible supplier is used as the basis for a purchase, the contracting officer...

  15. Comparative safety assessment of plant-derived foods.

    PubMed

    Kok, E J; Keijer, J; Kleter, G A; Kuiper, H A

    2008-02-01

    The second generation of genetically modified (GM) plants that are moving towards the market are characterized by modifications that may be more complex and traits that more often are to the benefit of the consumer. These developments will have implications for the safety assessment of the resulting plant products. In part of the cases the same crop plant can, however, also be obtained by 'conventional' breeding strategies. The breeder will decide on a case-by-case basis what will be the best strategy to reach the set target and whether genetic modification will form part of this strategy. This article discusses important aspects of the safety assessment of complex products derived from newly bred plant varieties obtained by different breeding strategies. On the basis of this overview, we conclude that the current process of the safety evaluation of GM versus conventionally bred plants is not well balanced. GM varieties are elaborately assessed, yet at the same time other crop plants resulting from conventional breeding strategies may warrant further food safety assessment for the benefit of the consumer. We propose to develop a general screening frame for all newly developed plant varieties to select varieties that cannot, on the basis of scientific criteria, be considered as safe as plant varieties that are already on the market.

  16. Safety and fitness electronic records system (SAFER) : user and system requirements document

    DOT National Transportation Integrated Search

    1996-10-28

    The Federal Highway Administration (FHWA) is currently testing and evaluating Intelligent : Transportation Systems (ITS) technologies to enhance the safety and efficiency of interstate and : intrastate commercial vehicle operations. The current focus...

  17. Directory of aerospace safety specialized information sources

    NASA Technical Reports Server (NTRS)

    Fullerton, E. A.; Rubens, L. S.; Mandel, G.; Mckenna, P. J.

    1974-01-01

    Directory aids safety specialists in locating information sources and individual experts in engineering-related fields. Lists 170 organizations and approximately 300 individuals who can provide safety-related technical information in form of documentation, data, and consulting expertise. Information on hazard and failure cause identification, accident analysis, and materials characteristics are covered.

  18. ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

    NASA Astrophysics Data System (ADS)

    Parkhurst, Stephen N.

    2000-01-01

    The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

  19. Technical Documentation Challenges in Aviation Maintenance: A Proceedings Report

    DTIC Science & Technology

    2012-11-01

    ATP Keith Frable - -- - -- - -- - - ASO-27 Colin Drury - -- - -- - -- - - Applied Ergonomics Lynn Pierce - -- - -- - -- - - AEG-15 Dave...threaten safety and cost the industry millions of dollars. The workshop format combined key presentation topics, followed by structured discussion and...critical and can produce very different results for the end user, depending on the authoring tools and formatting selected. Cost influences document

  20. USDOT guidance summary for connected vehicle deployments : safety management.

    DOT National Transportation Integrated Search

    2016-07-01

    This document provides guidance material in regards to safety management plan for the CV Pilots DeploymentConcept Development Phase. This guidance provides key concepts and references in developing the SafetyManagement Plan in Task 4, lists relevant ...

  1. Means of storage and automated monitoring of versions of text technical documentation

    NASA Astrophysics Data System (ADS)

    Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-03-01

    The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

  2. Technical Support Document for Version 3.6.1 of the COMcheck Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

    2009-09-29

    This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  3. Safety analysis and review system (SARS) assessment report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Browne, E.T.

    1981-03-01

    Under DOE Order 5481.1, Safety Analysis and Review System for DOE Operations, safety analyses are required for DOE projects in order to ensure that: (1) potential hazards are systematically identified; (2) potential impacts are analyzed; (3) reasonable measures have been taken to eliminate, control, or mitigate the hazards; and (4) there is documented management authorization of the DOE operation based on an objective assessment of the adequacy of the safety analysis. This report is intended to provide the DOE Office of Plans and Technology Assessment (OPTA) with an independent evaluation of the adequacy of the ongoing safety analysis effort. Asmore » part of this effort, a number of site visits and interviews were conducted, and FE SARS documents were reviewed. The latter included SARS Implementation Plans for a number of FE field offices, as well as safety analysis reports completed for certain FE operations. This report summarizes SARS related efforts at the DOE field offices visited and evaluates the extent to which they fulfill the requirements of DOE 5481.1.« less

  4. Documentation of hazards and safety perceptions for mechanized logging operations in east central Alabama

    Treesearch

    R. M. Bordas; G. A. Davis; B. L. Hopkins; R. E. Thornas; Robert B. Rummer

    2001-01-01

    The logging industry remains one of the most hazardous in the nation. Despite more stringent safety regulations and improvements in equipment safety features, the rate of logging fatalities has decreased at a much lower rate than the decrease in the rate of illnesses and injuries in the same occupation. The objective of this research was to identify and assess the...

  5. Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice; Victor, Daniel

    2008-01-01

    When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

  6. Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1989-06-01

    The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportationmore » safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included.« less

  7. MCPS School Safety and Security at a Glance 2007-2008

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2008

    2008-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, including school climate, local school safety program descriptions, and serious incidents in all Montgomery County (Maryland) Public Schools. The information is presented for…

  8. Work stress and patient safety: observer-rated work stressors as predictors of characteristics of safety-related events reported by young nurses.

    PubMed

    Elfering, A; Semmer, N K; Grebner, S

    This study investigates the link between workplace stress and the 'non-singularity' of patient safety-related incidents in the hospital setting. Over a period of 2 working weeks 23 young nurses from 19 hospitals in Switzerland documented 314 daily stressful events using a self-observation method (pocket diaries); 62 events were related to patient safety. Familiarity of safety-related events and probability of recurrence, as indicators of non-singularity, were the dependent variables in multilevel regression analyses. Predictor variables were both situational (self-reported situational control, safety compliance) and chronic variables (job stressors such as time pressure, or concentration demands and job control). Chronic work characteristics were rated by trained observers. The most frequent safety-related stressful events included incomplete or incorrect documentation (40.3%), medication errors (near misses 21%), delays in delivery of patient care (9.7%), and violent patients (9.7%). Familiarity of events and probability of recurrence were significantly predicted by chronic job stressors and low job control in multilevel regression analyses. Job stressors and low job control were shown to be risk factors for patient safety. The results suggest that job redesign to enhance job control and decrease job stressors may be an important intervention to increase patient safety.

  9. The GLAS Algorithm Theoretical Basis Document for Laser Footprint Location (Geolocation) and Surface Profiles

    NASA Technical Reports Server (NTRS)

    Shutz, Bob E.; Urban, Timothy J.

    2014-01-01

    This ATBD summarizes (and links with other ATBDs) the elements used to obtain the geolocated GLAS laser spot location, with respect to the Earth Center of Mass. Because of the approach used, the reference frame used to express the geolocation is linked to the reference frame used for POD and PAD, which are related to the ITRF. The geolocated spot coordinates (which includes the elevation or height, with respect to an adopted reference ellipsoid) is the inferred position of the laser spot, since the spot location is not directly measured. This document also summarizes the GLAS operation time periods.

  10. The GLAS Algorithm Theoretical Basis Document for Precision Orbit Determination (POD)

    NASA Technical Reports Server (NTRS)

    Rim, Hyung Jin; Yoon, S. P.; Schultz, Bob E.

    2013-01-01

    The Geoscience Laser Altimeter System (GLAS) was the sole instrument for NASA's Ice, Cloud and land Elevation Satellite (ICESat) laser altimetry mission. The primary purpose of the ICESat mission was to make ice sheet elevation measurements of the polar regions. Additional goals were to measure the global distribution of clouds and aerosols and to map sea ice, land topography and vegetation. ICESat was the benchmark Earth Observing System (EOS) mission to be used to determine the mass balance of the ice sheets, as well as for providing cloud property information, especially for stratospheric clouds common over polar areas. The GLAS instrument operated from 2003 to 2009 and provided multi-year elevation data needed to determine changes in sea ice freeboard, land topography and vegetation around the globe, in addition to elevation changes of the Greenland and Antarctic ice sheets. This document describes the Precision Orbit Determination (POD) algorithm for the ICESat mission. The problem of determining an accurate ephemeris for an orbiting satellite involves estimating the position and velocity of the satellite from a sequence of observations. The ICESatGLAS elevation measurements must be very accurately geolocated, combining precise orbit information with precision pointing information. The ICESat mission POD requirement states that the position of the instrument should be determined with an accuracy of 5 and 20 cm (1-s) in radial and horizontal components, respectively, to meet the science requirements for determining elevation change.

  11. Good practices on cost - effective road infrastructure safety investments.

    PubMed

    Yannis, George; Papadimitriou, Eleonora; Evgenikos, Petros; Dragomanovits, Anastasios

    2016-12-01

    The paper presents the findings of a research project aiming to quantify and subsequently classify several infrastructure-related road safety measures, based on the international experience attained through extensive and selected literature review and additionally on a full consultation process including questionnaire surveys addressed to experts and relevant workshops. Initially, a review of selected research reports was carried out and an exhaustive list of road safety infrastructure investments covering all types of infrastructure was compiled. Individual investments were classified according to the infrastructure investment area and the type of investment and were thereafter analysed on the basis of key safety components. These investments were subsequently ranked in relation to their safety effects and implementation costs and on the basis of this ranking, a set of five most promising investments was selected for an in-depth analysis. The results suggest that the overall cost effectiveness of a road safety infrastructure investment is not always in direct correlation with the safety effect and is recommended that cost-benefit ratios and safety effects are always examined in conjunction with each other in order to identify the optimum solution for a specific road safety problem in specific conditions and with specific objectives.

  12. A system safety model for developmental aircraft programs

    NASA Technical Reports Server (NTRS)

    Amberboy, E. J.; Stokeld, R. L.

    1982-01-01

    Basic tenets of safety as applied to developmental aircraft programs are presented. The integration of safety into the project management aspects of planning, organizing, directing and controlling is illustrated by examples. The basis for project management use of safety and the relationship of these management functions to 'real-world' situations is presented. The rationale which led to the safety-related project decision and the lessons learned as they may apply to future projects are presented.

  13. Low-cost safety enhancements for stop-controlled and signalized intersections

    DOT National Transportation Integrated Search

    2009-05-01

    The purpose of this document is to present information on suggested effective, low-cost intersection countermeasures developed using intersection safety research results and input from an intersection safety expert panel. These low-cost countermeasur...

  14. MCPS School Safety and Security at a Glance 2008-2009

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2009

    2009-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents in all Montgomery County (Maryland) Public Schools. The information is presented for each school.…

  15. MCPS School Safety and Security at a Glance 2010-2011

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2011

    2011-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents in all Montgomery County (Maryland) Public Schools. The information is presented for each school.…

  16. MCPS School Safety and Security at a Glance 2009-2010

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2010

    2010-01-01

    "MCPS School Safety and Security at a Glance" provides, in a single document, information about the reporting of incidents related to school safety and security, school climate, local school safety program descriptions, and serious incidents in all Montgomery County (Maryland) public schools. The information is presented for each school.…

  17. Safety Management Systems.

    ERIC Educational Resources Information Center

    Fido, A. T.; Wood, D. O.

    This document discusses the issues that need to be considered by the education and training system as it responds to the changing needs of industry in Great Britain. Following a general introduction, the development of quality management ideas is traced. The underlying principles of safety and risk management are clarified and the implications of…

  18. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    DOEpatents

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  19. Schoolchildren, Governmentality and National E-Safety Policy Discourse

    ERIC Educational Resources Information Center

    Hope, Andrew

    2015-01-01

    The introduction of widespread school Internet access in industrialised countries has been accompanied by the materialisation of what can be labelled as a national school e-safety agenda. Drawing upon Foucault's notions of discourse and governmentality, this paper explores how e-safety policy documents serve to constrain the conceptual…

  20. Research, development, and implementation of pedestrian safety facilities in the United Kingdom

    DOT National Transportation Integrated Search

    1999-12-01

    This report is one in a series of pedestrian safety synthesis reports prepared for the Federal Highway Administration to document pedestrian safety in other countries. This report reviews recent research on pedestrian safety carried out in the United...

  1. 77 FR 50720 - Test Documentation for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-22

    ... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Test Documentation for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1207, ``Test Documentation for Digital... practices for test documentation for software and computer systems as described in the Institute of...

  2. PWR-related integral safety experiments in the PKL 111 test facility SBLOCA under beyond-design-basis accident conditions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weber, P.; Umminger, K.J.; Schoen, B.

    1995-09-01

    The thermal hydraulic behavior of a PWR during beyond-design-basis accident scenarios is of vital interest for the verification and optimization of accident management procedures. Within the scope of the German reactor safety research program experiments were performed in the volumetrically scaled PKL 111 test facility by Siemens/KWU. This highly instrumented test rig simulates a KWU-design PWR (1300 MWe). In particular, the latest tests performed related to a SBLOCA with additional system failures, e.g. nitrogen entering the primary system. In the case of a SBLOCA, it is the goal of the operator to put the plant in a condition where themore » decay heat can be removed first using the low pressure emergency core cooling system and then the residual heat removal system. The experimental investigation presented assumed the following beyond-design-basis accident conditions: 0.5% break in a cold leg, 2 of 4 steam generators (SGs) isolated on the secondary side (feedwater- and steam line-valves closed), filled with steam on the primary side, cooldown of the primary system using the remaining two steam generators, high pressure injection system only in the two loops with intact steam generators, if possible no operator actions to reach the conditions for residual heat removal system activation. Furthermore, it was postulated that 2 of the 4 hot leg accumulators had a reduced initial water inventory (increased nitrogen inventory), allowing nitrogen to enter the primary system at a pressure of 15 bar and nearly preventing the heat transfer in the SGs ({open_quotes}passivating{close_quotes} U-tubes). Due to this the heat transfer regime in the intact steam generators changed remarkably. The primary system showed self-regulating system effects and heat transfer improved again (reflux-condenser mode in the U-tube inlet region).« less

  3. SureChEMBL: a large-scale, chemically annotated patent document database

    PubMed Central

    Papadatos, George; Davies, Mark; Dedman, Nathan; Chambers, Jon; Gaulton, Anna; Siddle, James; Koks, Richard; Irvine, Sean A.; Pettersson, Joe; Goncharoff, Nicko; Hersey, Anne; Overington, John P.

    2016-01-01

    SureChEMBL is a publicly available large-scale resource containing compounds extracted from the full text, images and attachments of patent documents. The data are extracted from the patent literature according to an automated text and image-mining pipeline on a daily basis. SureChEMBL provides access to a previously unavailable, open and timely set of annotated compound-patent associations, complemented with sophisticated combined structure and keyword-based search capabilities against the compound repository and patent document corpus; given the wealth of knowledge hidden in patent documents, analysis of SureChEMBL data has immediate applications in drug discovery, medicinal chemistry and other commercial areas of chemical science. Currently, the database contains 17 million compounds extracted from 14 million patent documents. Access is available through a dedicated web-based interface and data downloads at: https://www.surechembl.org/. PMID:26582922

  4. Obstetric Safety and Quality.

    PubMed

    Pettker, Christian M; Grobman, William A

    2015-07-01

    Obstetric safety and quality is an emerging and important topic not only as a result of the pressures of patient and regulatory expectations, but also because of the genuine interest of caregivers to reduce harm, improve outcomes, and optimize care. Although each seeks to improve care by using scientific approaches beyond human physiology and pathophysiology, patient safety methodologies seek to avoid preventable adverse events, whereas health care quality projects aim to achieve the best possible outcomes. It is well-documented that an increasingly complex medical system controlled by human workers is a circumstance subject to recurrent failure. A safety culture encourages a proactive approach to mitigate failure before, during, and after it occurs. This article highlights the key concepts in health care safety and quality and reviews the background of the quality improvement sciences with particular emphasis on obstetric outcomes and quality measures.

  5. Moderate Resolution Imaging Spectroradiometer (MODIS) MOD21 Land Surface Temperature and Emissivity Algorithm Theoretical Basis Document

    NASA Technical Reports Server (NTRS)

    Hulley, G.; Malakar, N.; Hughes, T.; Islam, T.; Hook, S.

    2016-01-01

    This document outlines the theory and methodology for generating the Moderate Resolution Imaging Spectroradiometer (MODIS) Level-2 daily daytime and nighttime 1-km land surface temperature (LST) and emissivity product using the Temperature Emissivity Separation (TES) algorithm. The MODIS-TES (MOD21_L2) product, will include the LST and emissivity for three MODIS thermal infrared (TIR) bands 29, 31, and 32, and will be generated for data from the NASA-EOS AM and PM platforms. This is version 1.0 of the ATBD and the goal is maintain a 'living' version of this document with changes made when necessary. The current standard baseline MODIS LST products (MOD11*) are derived from the generalized split-window (SW) algorithm (Wan and Dozier 1996), which produces a 1-km LST product and two classification-based emissivities for bands 31 and 32; and a physics-based day/night algorithm (Wan and Li 1997), which produces a 5-km (C4) and 6-km (C5) LST product and emissivity for seven MODIS bands: 20, 22, 23, 29, 31-33.

  6. Quieter Cars and the Safety of Blind Pedestrians: Phase 1.

    DOT National Transportation Integrated Search

    2010-04-01

    The National Highway Traffic Safety Administration recognizes that quieter cars such as hybrid-electric vehicles in low-speed operation using their : electric motors, may introduce a safety issue for pedestrians who are blind. This study documents th...

  7. Range Flight Safety Requirements

    NASA Technical Reports Server (NTRS)

    Loftin, Charles E.; Hudson, Sandra M.

    2018-01-01

    The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

  8. The CIS Database: Occupational Health and Safety Information Online.

    ERIC Educational Resources Information Center

    Siegel, Herbert; Scurr, Erica

    1985-01-01

    Describes document acquisition, selection, indexing, and abstracting and discusses online searching of the CIS database, an online system produced by the International Occupational Safety and Health Information Centre. This database comprehensively covers information in the field of occupational health and safety. Sample searches and search…

  9. Marine Safety Center briefing book

    DOT National Transportation Integrated Search

    1997-10-30

    The U.S. Coast Guard Marine Safety Center was established in 1986 as a consolidation of district Merchant Marine Technical Offices. Our offices are located on the sixth floor of the DOT Headquarters building in Washington, DC. This document provides ...

  10. Safety implications from design exceptions.

    DOT National Transportation Integrated Search

    2002-03-01

    The objectives of this study were to: a) summarize past design exceptions to document their frequency and reason for their use and b) determine if any adverse safety implications can be related to adopting design policies and practices related to des...

  11. 42 CFR 3.402 - Basis for a civil money penalty.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

  12. 42 CFR 3.402 - Basis for a civil money penalty.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

  13. 42 CFR 3.402 - Basis for a civil money penalty.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

  14. 42 CFR 3.402 - Basis for a civil money penalty.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

  15. 42 CFR 3.402 - Basis for a civil money penalty.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

  16. L-Band Digital Aeronautical Communications System Engineering - Initial Safety and Security Risk Assessment and Mitigation

    NASA Technical Reports Server (NTRS)

    Zelkin, Natalie; Henriksen, Stephen

    2011-01-01

    This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents a preliminary safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the L-band communication system after the technology is chosen and system rollout timing is determined. The security risk analysis resulted in identifying main security threats to the proposed system as well as noting additional threats recommended for a future security analysis conducted at a later stage in the system development process. The document discusses various security controls, including those suggested in the COCR Version 2.0.

  17. NASA's post-Challenger safety program - Themes and thrusts

    NASA Technical Reports Server (NTRS)

    Rodney, G. A.

    1988-01-01

    The range of managerial, technical, and procedural initiatives implemented by NASA's post-Challenger safety program is reviewed. The recommendations made by the Rogers Commission, the NASA post-Challenger review of Shuttle design, the Congressional investigation of the accident, the National Research Council, the Aerospace Safety Advisory Panel, and NASA internal advisory panels and studies are summarized. NASA safety initiatives regarding improved organizational accountability for safety, upgraded analytical techniques and methodologies for risk assessment and management, procedural initiatives in problem reporting and corrective-action tracking, ground processing, maintenance documentation, and improved technologies are discussed. Safety issues relevant to the planned Space Station are examined.

  18. Page layout analysis and classification for complex scanned documents

    NASA Astrophysics Data System (ADS)

    Erkilinc, M. Sezer; Jaber, Mustafa; Saber, Eli; Bauer, Peter; Depalov, Dejan

    2011-09-01

    A framework for region/zone classification in color and gray-scale scanned documents is proposed in this paper. The algorithm includes modules for extracting text, photo, and strong edge/line regions. Firstly, a text detection module which is based on wavelet analysis and Run Length Encoding (RLE) technique is employed. Local and global energy maps in high frequency bands of the wavelet domain are generated and used as initial text maps. Further analysis using RLE yields a final text map. The second module is developed to detect image/photo and pictorial regions in the input document. A block-based classifier using basis vector projections is employed to identify photo candidate regions. Then, a final photo map is obtained by applying probabilistic model based on Markov random field (MRF) based maximum a posteriori (MAP) optimization with iterated conditional mode (ICM). The final module detects lines and strong edges using Hough transform and edge-linkages analysis, respectively. The text, photo, and strong edge/line maps are combined to generate a page layout classification of the scanned target document. Experimental results and objective evaluation show that the proposed technique has a very effective performance on variety of simple and complex scanned document types obtained from MediaTeam Oulu document database. The proposed page layout classifier can be used in systems for efficient document storage, content based document retrieval, optical character recognition, mobile phone imagery, and augmented reality.

  19. Project IMPACT Software Documentation: Overview of the Computer-Administered Instruction Subsystem.

    ERIC Educational Resources Information Center

    Stelzer, John; Garneau, Jean

    Research in Project IMPACT, prototypes of computerized training for Army personnel, is documented in an overview of the IMPACT computer software system for computer-administered instruction, exclusive of instructional software. The overview description provides a basis for an understanding of the rationale and motivation for the development of the…

  20. C-Band Airport Surface Communications System Engineering-Initial High-Level Safety Risk Assessment and Mitigation

    NASA Technical Reports Server (NTRS)

    Zelkin, Natalie; Henriksen, Stephen

    2011-01-01

    This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.

  1. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate.

    PubMed

    Hystad, Sigurd W; Bartone, Paul T; Eid, Jarle

    2014-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents.

  2. Inland Waterway Environmental Safety

    NASA Astrophysics Data System (ADS)

    Reshnyak, Valery; Sokolov, Sergey; Nyrkov, Anatoliy; Budnik, Vlad

    2018-05-01

    The article presents the results of development of the main components of the environmental safety when operating vessels on inland waterways, which include strategy selection ensuring the environmental safety of vessels, the selection and justification of a complex of environmental technical means, activities to ensure operation of vessels taking into account the environmental technical means. Measures to ensure environmental safety are developed on the basis of the principles aimed at ensuring environmental safety of vessels. They include the development of strategies for the use of environmental protection equipment, which are determined by the conditions for wastewater treatment of purified sewage and oily bilge water as well as technical characteristics of the vessels, the introduction of the process of the out-of-the-vessel processing of ship pollution as a technology for their movement. This must take into account the operating conditions of vessels on different sections of waterways. An algorithm of actions aimed at ensuring ecological safety of operated vessels is proposed.

  3. Proceedings of the Nuclear Criticality Technology Safety Workshop

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rene G. Sanchez

    1998-04-01

    This document contains summaries of most of the papers presented at the 1995 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 16 and 17 at San Diego, Ca. The meeting was broken up into seven sessions, which covered the following topics: (1) Criticality Safety of Project Sapphire; (2) Relevant Experiments For Criticality Safety; (3) Interactions with the Former Soviet Union; (4) Misapplications and Limitations of Monte Carlo Methods Directed Toward Criticality Safety Analyses; (5) Monte Carlo Vulnerabilities of Execution and Interpretation; (6) Monte Carlo Vulnerabilities of Representation; and (7) Benchmark Comparisons.

  4. Forest Service National Visitor Use Monitoring Process: Research Method Documentation

    Treesearch

    Donald B.K. English; Susan M. Kocis; Stanley J. Zarnoch; J. Ross Arnold

    2002-01-01

    In response to the need for improved information on recreational use of National Forest System lands, the authors have developed a nationwide, systematic monitoring process. This report documents the methods they used in estimating recreational use on an annual basis. The basic unit of measure is exiting volume of visitors from a recreation site on a given day. Sites...

  5. Recommended child safety seat enforcement guidelines

    DOT National Transportation Integrated Search

    1989-10-01

    The document presents suggestions and examples for planning, developing, implementing and evaluating a local enforcement and public information and education program to increase the use and correct use of child safety seats. The guidelines represent ...

  6. The Dread Factor: How Hazards and Safety Training Influence Learning and Performance

    ERIC Educational Resources Information Center

    Burke, Michael J.; Salvador, Rommel O.; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

    2011-01-01

    On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous…

  7. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 7. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burt, D.L.

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 7) presents the standards and requirements for the following sections: Occupational Safety and Health, and Environmental Protection.

  8. Accelerated vehicle-to-infrastructure (V2I) safety applications : concept of operations document.

    DOT National Transportation Integrated Search

    2001-12-01

    This document summarizes lessons learned through the evaluation of four sites selected in 1996 to serve as national models for deploying and operating intelligent transportation systems (ITS) in metropolitan areas. One of the goals of the Metropolita...

  9. 15 CFR 971.802 - Public disclosure of documents received by NOAA.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... received by NOAA. 971.802 Section 971.802 Commerce and Foreign Trade Regulations Relating to Commerce and... Miscellaneous § 971.802 Public disclosure of documents received by NOAA. (a) Purpose. This section provides a... assure that NOAA has a complete and proper basis for determining the legality and appropriateness of...

  10. 15 CFR 971.802 - Public disclosure of documents received by NOAA.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... received by NOAA. 971.802 Section 971.802 Commerce and Foreign Trade Regulations Relating to Commerce and... Miscellaneous § 971.802 Public disclosure of documents received by NOAA. (a) Purpose. This section provides a... assure that NOAA has a complete and proper basis for determining the legality and appropriateness of...

  11. 15 CFR 971.802 - Public disclosure of documents received by NOAA.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... received by NOAA. 971.802 Section 971.802 Commerce and Foreign Trade Regulations Relating to Commerce and... Miscellaneous § 971.802 Public disclosure of documents received by NOAA. (a) Purpose. This section provides a... assure that NOAA has a complete and proper basis for determining the legality and appropriateness of...

  12. 15 CFR 971.802 - Public disclosure of documents received by NOAA.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... received by NOAA. 971.802 Section 971.802 Commerce and Foreign Trade Regulations Relating to Commerce and... Miscellaneous § 971.802 Public disclosure of documents received by NOAA. (a) Purpose. This section provides a... assure that NOAA has a complete and proper basis for determining the legality and appropriateness of...

  13. Simulation Detection in Handwritten Documents by Forensic Document Examiners.

    PubMed

    Kam, Moshe; Abichandani, Pramod; Hewett, Tom

    2015-07-01

    This study documents the results of a controlled experiment designed to quantify the abilities of forensic document examiners (FDEs) and laypersons to detect simulations in handwritten documents. Nineteen professional FDEs and 26 laypersons (typical of a jury pool) were asked to inspect test packages that contained six (6) known handwritten documents written by the same person and two (2) questioned handwritten documents. Each questioned document was either written by the person who wrote the known documents, or written by a different person who tried to simulate the writing of the person who wrote the known document. The error rates of the FDEs were smaller than those of the laypersons when detecting simulations in the questioned documents. Among other findings, the FDEs never labeled a questioned document that was written by the same person who wrote the known documents as "simulation." There was a significant statistical difference between the responses of the FDEs and layperson for documents without simulations. © 2015 American Academy of Forensic Sciences.

  14. The Development of Project Orion Ground Safety Requirements

    NASA Technical Reports Server (NTRS)

    Kirkpatrick, Paul; Condzella, Bill; Williams, Jeff

    2011-01-01

    In spite of a very compressed schedule, Project Orion's AFT safety team was able to pull together a comprehensive set of ground safety requirements using existing requirements and subject matter experts. These requirements will serve as the basis for the design of GSE and ground operations. Using the above lessons as a roadmap, new Projects can produce the same results. A rigorous set of ground safety requirements is required to assure ground support equipment (GSE) and associated flight hardware ground operations are conducted safety

  15. Software for the occupational health and safety integrated management system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vătăsescu, Mihaela

    2015-03-10

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety.

  16. Airline Safety and Economy

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This video documents efforts at NASA Langley Research Center to improve safety and economy in aircraft. Featured are the cockpit weather information needs computer system, which relays real time weather information to the pilot, and efforts to improve techniques to detect structural flaws and corrosion, such as the thermal bond inspection system.

  17. Environment/Health/Safety (EHS): Databases

    Science.gov Websites

    Hazard Documents Database Biosafety Authorization System CATS (Corrective Action Tracking System) (for findings 12/2005 to present) Chemical Management System Electrical Safety Ergonomics Database (for new Learned / Best Practices REMS - Radiation Exposure Monitoring System SJHA Database - Subcontractor Job

  18. The risk/safety assessment of transgenic crops: the transportability of data.

    PubMed

    Kearns, Peter; Dagallier, Bertrand; Suwabe, Kazuyuki

    2014-12-01

    This paper presents the activities and publications of Organisation for Economic Co-operation and Developments (OECD's) Working Group on Harmonisation of Regulatory Oversight in Biotechnology and the Task Force for the Safety of Novel Foods and Feeds. The main outputs of the work are the Series of "consensus documents" of the respective groups. These documents compile information which is intended to be used by those involved in the business of risk/safety assessment. These documents are one means of ensuring the transportability of data amongst authorities. An increasing trend in both the Working Group and Task Force is to consider crop species which are relevant to tropical regions and therefore to countries that are not necessarily members of the OECD. For example, the Working Group has recently published a consensus document on bananas and plantains while the Task Force has published a document on cassava. This trend towards crops of greater interest in the tropics is likely to continue into the future.

  19. An investigation and analysis of safety issues in Polish small construction plants.

    PubMed

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety.

  20. An investigation and analysis of safety issues in Polish small construction plants

    PubMed Central

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety. PMID:26694002

  1. Evaluating Performance of Highway Safety Projects

    DOT National Transportation Integrated Search

    2016-12-01

    The purpose of this project was to investigate and document methods that the Idaho Transportation Department (ITD) and Local Highway Technical Assistance Council (LHTAC) can use to evaluate the performance of safety projects that have been implemente...

  2. Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals.

    PubMed

    Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

    2014-02-01

    Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the 'feedback' phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as 'critical'; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included 'normalisation' of errors, study duration, ward leadership, capacity to engage and learning preferences. Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators' effectiveness and how indicators and overall scorecard composition fit the intended audience.

  3. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate

    PubMed Central

    Hystad, Sigurd W.; Bartone, Paul T.; Eid, Jarle

    2013-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents. PMID:24454524

  4. [Agricultural biotechnology safety assessment].

    PubMed

    McClain, Scott; Jones, Wendelyn; He, Xiaoyun; Ladics, Gregory; Bartholomaeus, Andrew; Raybould, Alan; Lutter, Petra; Xu, Haibin; Wang, Xue

    2015-01-01

    Genetically modified (GM) crops were first introduced to farmers in 1995 with the intent to provide better crop yield and meet the increasing demand for food and feed. GM crops have evolved to include a thorough safety evaluation for their use in human food and animal feed. Safety considerations begin at the level of DNA whereby the inserted GM DNA is evaluated for its content, position and stability once placed into the crop genome. The safety of the proteins coded by the inserted DNA and potential effects on the crop are considered, and the purpose is to ensure that the transgenic novel proteins are safe from a toxicity, allergy, and environmental perspective. In addition, the grain that provides the processed food or animal feed is also tested to evaluate its nutritional content and identify unintended effects to the plant composition when warranted. To provide a platform for the safety assessment, the GM crop is compared to non-GM comparators in what is typically referred to as composition equivalence testing. New technologies, such as mass spectrometry and well-designed antibody-based methods, allow better analytical measurements of crop composition, including endogenous allergens. Many of the analytical methods and their intended uses are based on regulatory guidance documents, some of which are outlined in globally recognized documents such as Codex Alimentarius. In certain cases, animal models are recommended by some regulatory agencies in specific countries, but there is typically no hypothesis or justification of their use in testing the safety of GM crops. The quality and standardization of testing methods can be supported, in some cases, by employing good laboratory practices (GLP) and is recognized in China as important to ensure quality data. Although the number of recommended, in some cases, required methods for safety testing are increasing in some regulatory agencies, it should be noted that GM crops registered to date have been shown to be

  5. Public Safety Core. Integrated Academic and Technical Competencies (ITAC).

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document, which lists the public safety core competencies that are part of the Integrated Academic and Technical Competencies (ITAC) in Ohio, is intended to assist individuals and organizations develop a course to provide students with knowledge and skills applicable to public safety careers, including but not limited to firefighter,…

  6. The Tennis Ball Bomb Incident or the Safety Plan as "Shelf Document"

    ERIC Educational Resources Information Center

    Fast, Jonathan; Fanelli, Rossella

    2003-01-01

    This article presents a case study of a single incident involving a high school student who brought a "tennis ball" bomb to school. Although the district had recently created a safety plan, with a specific protocol for the discovery of a bomb in the building, the principal and the crises team ignored it. The principal did not refer to…

  7. 77 FR 13978 - Railroad Workplace Safety; Adjacent-Track On-Track Safety for Roadway Workers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    ... rule; delay of effective date and request for comments. SUMMARY: This document delays the effective date of the final rule published November 30, 2011, and scheduled to take effect on May 1, 2012. The final rule mandates that roadway workers comply with specified on-track safety procedures that railroads...

  8. Simulation of data safety components for corporative systems

    NASA Astrophysics Data System (ADS)

    Yaremko, Svetlana A.; Kuzmina, Elena M.; Savchuk, Tamara O.; Krivonosov, Valeriy E.; Smolarz, Andrzej; Arman, Abenov; Smailova, Saule; Kalizhanova, Aliya

    2017-08-01

    The article deals with research of designing data safety components for corporations by means of mathematical simulations and modern information technologies. Simulation of threats ranks has been done which is based on definite values of data components. The rules of safety policy for corporative information systems have been presented. The ways of realization of safety policy rules have been proposed on the basis of taken conditions and appropriate class of valuable data protection.

  9. [Development and integration of the Oncological Documentation System ODS].

    PubMed

    Raab, G; van Den Bergh, M

    2001-08-01

    To simplify clinical routine and to improve medical quality without exceeding the existing resources. Intensifying communication and cooperation between all institutions of patients' health care. The huge amount of documentation work of physicians can no longer be done without modern tools of paperless data processing. The development of ODS was a tight cooperation between physician and technician which resulted in a mutual understanding and led to a high level of user convenience. - At present all cases of gynecology, especially gynecologic oncology can be documented and processed by ODS. Users easily will adopt the system as data entry within different program areas follows the same rules. In addition users can choose between an individual input of data and assistants guiding them through highly specific areas of documentation. ODS is a modern, modular structured and very fast multiuser database environment for in- and outpatient documentation. It automatically generates a lot of reports for clinical day to day business. Statistical routines will help the user reflecting his work and its quality. Documentation of clinical trials according to the GCP guidelines can be done by ODS using the internet or offline datasharing. As ODS is the synthesis of a computer based patient administration system and an oncological documentation database, it represents the basis for the construction of the electronical patient chart as well as the digital documentation of clinical trials. The introduction of this new technology to physicians and nurses has to be done slowly and carefully, in order to increase motivation and to improve the results.

  10. SureChEMBL: a large-scale, chemically annotated patent document database.

    PubMed

    Papadatos, George; Davies, Mark; Dedman, Nathan; Chambers, Jon; Gaulton, Anna; Siddle, James; Koks, Richard; Irvine, Sean A; Pettersson, Joe; Goncharoff, Nicko; Hersey, Anne; Overington, John P

    2016-01-04

    SureChEMBL is a publicly available large-scale resource containing compounds extracted from the full text, images and attachments of patent documents. The data are extracted from the patent literature according to an automated text and image-mining pipeline on a daily basis. SureChEMBL provides access to a previously unavailable, open and timely set of annotated compound-patent associations, complemented with sophisticated combined structure and keyword-based search capabilities against the compound repository and patent document corpus; given the wealth of knowledge hidden in patent documents, analysis of SureChEMBL data has immediate applications in drug discovery, medicinal chemistry and other commercial areas of chemical science. Currently, the database contains 17 million compounds extracted from 14 million patent documents. Access is available through a dedicated web-based interface and data downloads at: https://www.surechembl.org/. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  11. Section 8(d) Health Safety Data Reporting User Guide – Primary Support

    EPA Pesticide Factsheets

    This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) Section 8(d) Health & Safety Data Reporting application. This document is the user guide for the Primary Support user.

  12. 33 CFR 96.360 - Interim Safety Management Certificate: what is it and when can it be used?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... section, when— (1) The company's valid Document of Compliance certificate or Interim Document of Compliance certificate applies to that vessel type; (2) The company's safety management system for the vessel... to the responsible person or their company. (b) An Interim Safety Management Certificate is valid for...

  13. New Entrant Safety Research. Final Report.

    DOT National Transportation Integrated Search

    1998-04-23

    This report documents a study of the safety performance and compliance of motor carriers entering interstate service, i.e., new entrants, and the possible need for a new entrant prequalification and monitoring program. The study was conducted by the ...

  14. Projecting effects of improvements in passive safety of the New Zealand light vehicle fleet.

    PubMed

    Keall, Michael; Newstead, Stuart; Jones, Wayne

    2007-09-01

    In the year 2000, as part of the process for setting New Zealand road safety targets, a projection was made for a reduction in social cost of 15.5 percent associated with improvements in crashworthiness, which is a measure of the occupant protection of the light passenger vehicle fleet. Since that document was produced, new estimates of crashworthiness have become available, allowing for a more accurate projection. The objective of this paper is to describe a methodology for projecting changes in casualty rates associated with passive safety features and to apply this methodology to produce a new prediction. The shape of the age distribution of the New Zealand light passenger vehicle fleet was projected to 2010. Projected improvements in crashworthiness and associated reductions in social cost were also modeled based on historical trends. These projections of changes in the vehicle fleet age distribution and of improvements in crashworthiness together provided a basis for estimating the future performance of the fleet in terms of secondary safety. A large social cost reduction of about 22 percent for 2010 compared to the year 2000 was predicted due to the expected huge impact of improvements in passive vehicle features on road trauma in New Zealand. Countries experiencing improvements in their vehicle fleets can also expect significant reductions in road injury compared to a less crashworthy passenger fleet. Such road safety gains can be analyzed using some of the methodology described here.

  15. Safety Evaluation Report for the Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-01-01

    This report documents the US Nuclear Regulatory Commission (NRC) staff review and safety evaluation of the Louisiana Energy Services, L.P. (LES, the applicant) application for a license to possess and use byproduct, source, and special nuclear material and to enrich natural uranium to a maximum of 5 percent U-235 by the gas centrifuge process. The plant, to be known as the Claiborne Enrichment Center (CEC), would be constructed near the town of Homer in Claiborne Parish, Louisiana. At full production in a given year, the plant will receive approximately 4,700 tonnes of feed UF{sub 6} and produce 870 tonnes ofmore » low-enriched UF{sub 6}, and 3,830 tonnes of depleted UF{sub 6} tails. Facility construction, operation, and decommissioning are expected to last 5, 30, and 7 years, respectively. The objective of the review is to evaluate the potential adverse impacts of operation of the facility on worker and public health and safety under both normal operating and accident conditions. The review also considers the management organization, administrative programs, and financial qualifications provided to assure safe design and operation of the facility. The NRC staff concludes that the applicant`s descriptions, specifications, and analyses provide an adequate basis for safety review of facility operations and that construction and operation of the facility does not pose an undue risk to public health and safety.« less

  16. A site of communication among enterprises for supporting occupational health and safety management system.

    PubMed

    Velonakis, E; Mantas, J; Mavrikakis, I

    2006-01-01

    The occupational health and safety management constitutes a field of increasing interest. Institutions in cooperation with enterprises make synchronized efforts to initiate quality management systems to this field. Computer networks can offer such services via TCP/IP which is a reliable protocol for workflow management between enterprises and institutions. A design of such network is based on several factors in order to achieve defined criteria and connectivity with other networks. The network will be consisted of certain nodes responsible to inform executive persons on Occupational Health and Safety. A web database has been planned for inserting and searching documents, for answering and processing questionnaires. The submission of files to a server and the answers to questionnaires through the web help the experts to make corrections and improvements on their activities. Based on the requirements of enterprises we have constructed a web file server. We submit files in purpose users could retrieve the files which need. The access is limited to authorized users and digital watermarks authenticate and protect digital objects. The Health and Safety Management System follows ISO 18001. The implementation of it, through the web site is an aim. The all application is developed and implemented on a pilot basis for the health services sector. It is all ready installed within a hospital, supporting health and safety management among different departments of the hospital and allowing communication through WEB with other hospitals.

  17. Documental Studio and 3d Recreation of the San Ildefonso's School Facade, Alcala de Henares

    NASA Astrophysics Data System (ADS)

    Echeverría, E.; Castaño, E.; Casa, F.; Celis, F.; Chias, P.

    2017-02-01

    In order to make the last important restoration of the University of Alcala's facade, an important documentation work and 3D recreation has been done, under three premises: historical documental study, study of the materials and, finally, 3D recreation of the facade. Part of these competences have been assumed by our research group under the safety net of the project that we come to tell in this communication.

  18. Improving commercial motor vehicle safety in Oregon.

    DOT National Transportation Integrated Search

    2010-08-01

    This study addressed the primary functions of the Oregon Department of Transportations (ODOTs) Motor Carrier Safety Assistance Program (MCSAP), which is administered by the Motor Carrier Transportation Division (MCTD). The study first documente...

  19. Tank waste remediation system nuclear criticality safety program management review

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BRADY RAAP, M.C.

    1999-06-24

    This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999.

  20. High-Speed Maglev Trains; German Safety Requirements

    DOT National Transportation Integrated Search

    1991-12-31

    This document is a translation of technology-specific safety requirements developed : for the German Transrapid Maglev technology. These requirements were developed by a : working group composed of representatives of German Federal Railways (DB), Tes...

  1. Determination of Waste Groupings for Safety Analyses

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BARKER, S.A.

    2000-04-27

    Two workshops were held in May and July 1999 to review data analysis methodologies associated with the analysis of flammable gas behavior. The workshop participants decided that missing data could he estimated by using a distribution of values that encompassed tanks with wastes that behaved in a similar fashion. It was also determined that because of the limited amount of tank data pertaining to flammable gas generation and retention, it was not justified to divide the tanks into many small waste groupings. The purpose for grouping tanks is so that limited gas retention and release data, which may be availablemore » for some tanks within a group, can be applied to other tanks containing the same waste form. This is necessary when estimating waste properties for tanks with missing or incomplete information. Following the workshop, a preliminary tank grouping was prepared based on content of solids, liquids, sludge, saltcake, or salt slurry The saltcake and salt slurry were then grouped together and referred to as saltcake/salt slurry. Initial tank classifications were based on waste forms from the Rest Basis Inventory, the Hanford Defined Waste (HDW) (''Agnew'') Model, or the Waste Tank Summary (''Hanlon'') Report The results of this grouping arc presented in ''Flamable Gas Safety Analysis Data Review'', SNL-000 198 (Barker, et al., 1999). At the time of the release of SNL-000198, tank waste inventories were not consistent between published sources, such as the ''Best Basis Inventory'' and the ''Waste Tank Summary Report for Month Ending August 31, 1999'' (Hanlon l999). This calculation note documents the process and basis used when revising the waste groupings following the release of SNL-000198. The waste layer volume information is compared between the various databases, including information obtained from process measurements. Differences are then resolved based on tank characterization information and waste behavior.« less

  2. Documentation of 50% water conservation in a single process at a beef abattoir

    USDA-ARS?s Scientific Manuscript database

    Beef slaughter is water intensive due to stringent food safety requirements. We conducted a study at a commercial beef processor to demonstrate water conservation by modifying the mechanical head wash. We documented the initial nozzle configuration (112 nozzles), water pressure (275 kPa), and flowra...

  3. Workplace Health and Safety across the Vocational/Technical Curriculum.

    ERIC Educational Resources Information Center

    Ryan, Thomas; Hinkley, Carl

    This document contains the outcomes of a pilot project to develop materials and methods of integrating occupational health and safety into the curriculum of the technologies at a technical college. Section I is a model of how to integrate health and safety into a vocational-technical curriculum. Based on the Outcomes-Based Guidelines developed by…

  4. An Evaluation of Proposed School Safety Indicators for Georgia.

    ERIC Educational Resources Information Center

    Todd, Knox H.; Kellermann, Arthur L.; Wald, Marlena; Lipscomb, Leslie; Fajman, Nancy

    One of the tasks of the Council for School Performance is to implement measures of school safety to determine the impact of Georgia Lottery for Education expenditures. During the 1994-95 school year, the council pilot-tested several indicators of school safety. This document presents the results of an evaluation that examined the relevance,…

  5. TOMS Near Realtime System design document

    NASA Technical Reports Server (NTRS)

    Puccinelli, E. F.

    1981-01-01

    The System Design Document for the TOMS (Total Mapping Spectrometer) Near Realtime System provides detailed definition of the system functions and records the system history from a data processing and development point-of-view. The system was designed to produce map products displaying ozone concentrations over the United States as measured by the TOMS flown on the NIMBUS 7 satellite. The maps were produced and delivered to the user within six hours of round receipt of the satellite data for the period March 1, 1981 through May 15, 1981 on a daily basis. Sample system products are shown and data archival locations are listed.

  6. Adult Learning in Health and Safety: Some Issues and Approaches.

    ERIC Educational Resources Information Center

    O Fathaigh, Mairtin

    This document, which was developed for presentation at a seminar on adult learning and safety, examines approaches to occupational safety and health (OSH) learning/training in the workplace. Section 1 examines selected factors affecting adults' learning in workplace OSH programs. The principal dimensions along which individual adult learners will…

  7. Enlisting health departments in highway safety programs

    DOT National Transportation Integrated Search

    1983-02-01

    Author's abstract: This report documents the manner and degree of health agency involvement in motor vehicle injury prevention activities. It describes not only the existing cooperative activities between state highway safety and health agencies, but...

  8. Two-lane rural highways safety performance functions.

    DOT National Transportation Integrated Search

    2016-05-01

    This report documents findings from a comprehensive set of safety performance functions developed for the entire : state two-lane rural highway system in Washington. The findings indicate that random parameter models and : heterogeneous negative bino...

  9. 9 CFR 307.6 - Basis of billing for overtime and holiday services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Basis of billing for overtime and holiday services. 307.6 Section 307.6 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION...

  10. Developing safety performance measures for roundabout applications in the state of Oregon.

    DOT National Transportation Integrated Search

    2013-04-01

    This report documents the research effort to quantify the safety performance of roundabouts in the State of Oregon. : The primary goal of this research is to provide the Oregon Department of Transportation (ODOT) with safety : performance functions (...

  11. Analyzing Software Requirements Errors in Safety-Critical, Embedded Systems

    NASA Technical Reports Server (NTRS)

    Lutz, Robyn R.

    1993-01-01

    This paper analyzes the root causes of safety-related software errors in safety-critical, embedded systems. The results show that software errors identified as potentially hazardous to the system tend to be produced by different error mechanisms than non- safety-related software errors. Safety-related software errors are shown to arise most commonly from (1) discrepancies between the documented requirements specifications and the requirements needed for correct functioning of the system and (2) misunderstandings of the software's interface with the rest of the system. The paper uses these results to identify methods by which requirements errors can be prevented. The goal is to reduce safety-related software errors and to enhance the safety of complex, embedded systems.

  12. Hawaii State Plan for Occupational Safety and Health. Final rule.

    PubMed

    2012-09-21

    This document announces the Occupational Safety and Health Administration's (OSHA) decision to modify the Hawaii State Plan's ``final approval'' determination under Section 18(e) of the Occupational Safety and Health Act (the Act) and to transition to ``initial approval'' status. OSHA is reinstating concurrent federal enforcement authority over occupational safety and health issues in the private sector, which have been solely covered by the Hawaii State Plan since 1984.

  13. 76 FR 17808 - Final Vehicle Safety Rulemaking and Research Priority Plan 2011-2013

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... [Docket No. NHTSA-2009-0108] Final Vehicle Safety Rulemaking and Research Priority Plan 2011- 2013 AGENCY... availability. SUMMARY: This document announces the availability of the Final NHTSA Vehicle Safety and Fuel.... This Priority Plan is an update to the Final Vehicle Safety Rulemaking and Research Priority Plan 2009...

  14. Tobacco Industry Efforts to Defeat the Occupational Safety and Health Administration Indoor Air Quality Rule

    PubMed Central

    Bryan-Jones, Katherine; Bero, Lisa A.

    2003-01-01

    Objectives. We describe tobacco industry strategies to defeat the Occupational Safety and Health Administration (OSHA) Indoor Air Quality rule and the implementation of those strategies. Methods. We analyzed tobacco industry documents, public commentary on, and media coverage of the OSHA rule. Results. The tobacco industry had 5 strategies: (1) maintain scientific debate about the basis of the rule, (2) delay deliberation on the rule, (3) redefine the scope of the rule, (4) recruit and assist labor and business organizations in opposing the rule, and (5) increase media coverage of the tobacco industry position. The tobacco industry successfully implemented all 5 strategies. Conclusions. Our findings suggest that regulatory authorities must take into account the source, motivation, and validity of arguments used in the regulatory process in order to make accurately informed decisions. PMID:12660202

  15. Standards Guidelines. Safety in Oregon Schools. OAR 581-22-706.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Education, Salem.

    This document contains guidelines that help Oregon schools meet the components of Oregon Administrative Rule 581-22-706, Emergency Plans and Safety Programs. The standard mandates that Oregon schools shall maintain a comprehensive safety program for all employees and students. School districts may alter the guidelines provided in this guidebook to…

  16. Qualitative Future Safety Risk Identification an Update

    NASA Technical Reports Server (NTRS)

    Barr, Lawrence C.

    2017-01-01

    The purpose of this report is to document the results of a high-level qualitative study that was conducted to identify future aviation safety risks and to assess the potential impacts to the National Airspace System (NAS) of NASA Aviation Safety research on these risks. Multiple external sources (for example, the National Transportation Safety Board, the Flight Safety Foundation, the National Research Council, and the Joint Planning and Development Office) were used to develop a compilation of future safety issues risks, also referred to as future tall poles. The primary criterion used to identify the most critical future safety risk issues was that the issue must be cited in several of these sources as a safety area of concern. The tall poles in future safety risk, in no particular order of importance, are as follows: Runway Safety, Loss of Control In Flight, Icing Ice Detection, Loss of Separation, Near Midair Collision Human Fatigue, Increasing Complexity and Reliance on Automation, Vulnerability Discovery, Data Sharing and Dissemination, and Enhanced Survivability in the Event of an Accident.

  17. System Safety in an IT Service Organization

    NASA Astrophysics Data System (ADS)

    Parsons, Mike; Scutt, Simon

    Within Logica UK, over 30 IT service projects are considered safetyrelated. These include operational IT services for airports, railway infrastructure asset management, nationwide radiation monitoring and hospital medical records services. A recent internal audit examined the processes and documents used to manage system safety on these services and made a series of recommendations for improvement. This paper looks at the changes and the challenges to introducing them, especially where the service is provided by multiple units supporting both safety and non-safety related services from multiple locations around the world. The recommendations include improvements to service agreements, improved process definitions, routine safety assessment of changes, enhanced call logging, improved staff competency and training, and increased safety awareness. Progress is reported as of today, together with a road map for implementation of the improvements to the service safety management system. A proposal for service assurance levels (SALs) is discussed as a way forward to cover the wide variety of services and associated safety risks.

  18. DOE explosives safety manual

    NASA Astrophysics Data System (ADS)

    1990-05-01

    The Department of Energy (DOE) policy requires that all activities be conducted in a manner that protects the safety of the public and provides a safe and healthful workplace for employees. DOE has also prescribed that all personnel be protected in any explosives operation undertaken. The level of safety provided shall be at least equivalent to that of the best industrial practice. The risk of death or serious injury shall be limited to the lowest practicable minimum. DOE and contractors shall continually review their explosives operations with the aim of achieving further refinements and improvements in safety practices and protective features. This manual describes the Department's explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. It is intended to reflect the state-of-the-art in explosives safety. In addition, it is essential that applicable criteria and requirements for implementing this policy be readily available and known to those responsible for conducting DOE programs. This document shall be periodically reviewed and updated to establish new requirements as appropriate. Users are requested to submit suggestions for improving the DOE Explosives Safety Manual through their appropriate Operations Office to the Office of Quality Programs.

  19. Evaluation of child safety seat enforcement strategies

    DOT National Transportation Integrated Search

    1989-09-01

    Nine community programs designed to increase child safety seat (CSS) use through public information and education (PI&E) and enforcement were evaluated. An administrative evaluation documented each site's PI&E and enforcement activties. A total of 5,...

  20. A Taxonomy of Fallacies in System Safety Arguments

    NASA Technical Reports Server (NTRS)

    Greenwell, William S.; Knight, John C.; Holloway, C. Michael; Pease, Jacob J.

    2006-01-01

    Safety cases are gaining acceptance as assurance vehicles for safety-related systems. A safety case documents the evidence and argument that a system is safe to operate; however, logical fallacies in the underlying argument may undermine a system s safety claims. Removing these fallacies is essential to reduce the risk of safety-related system failure. We present a taxonomy of common fallacies in safety arguments that is intended to assist safety professionals in avoiding and detecting fallacious reasoning in the arguments they develop and review. The taxonomy derives from a survey of general argument fallacies and a separate survey of fallacies in real-world safety arguments. Our taxonomy is specific to safety argumentation, and it is targeted at professionals who work with safety arguments but may lack formal training in logic or argumentation. We discuss the rationale for the selection and categorization of fallacies in the taxonomy. In addition to its applications to the development and review of safety cases, our taxonomy could also support the analysis of system failures and promote the development of more robust safety case patterns.

  1. White Paper on Factors of Safety

    NASA Technical Reports Server (NTRS)

    Raju, Ivatury; Stadler, John; Kramer-White, Jule; Piascik, Robert

    2012-01-01

    Following the Columbia Accident Investigation Board (CAIB) Report, the "Diaz Team" identified CAIB Report elements with Agency-wide applicability. The "Diaz Report", A Renewed Commitment To Excellence, generated an action to "Review current policies and waivers on safety factors". This document addresses this action.

  2. 76 FR 13121 - Electronic On-Board Recorders and Hours of Service Supporting Documents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration 49 CFR Parts 385, 390, and 395 [Docket No. FMCSA-2010-0167] RIN 2126-AB20 Electronic On-Board Recorders and Hours of Service... comment period for the Electronic On-Board Recorder and Hours of Service Supporting Documents Notice of...

  3. Assessment of the safety-relevance of pedestrian and bicyclist programs. Volume 1, Conduct and results

    DOT National Transportation Integrated Search

    1983-04-01

    This document (Volume One of a Two Volume Report) describes the development of a paper-and-pencil instrument for assessing the safety relevance of pedestrian and bicyclist safety education programs. The safety relevance of the program is the extent t...

  4. Safety performance functions for freeway merge zones.

    DOT National Transportation Integrated Search

    2013-12-01

    This report documents the results of a research project to support CDOT in the area of Safety : Performance Function (SPF) development. The project involved collecting data and developing SPFs for : ramp-freeway merge zones categorized as isolated, n...

  5. Clinical dashboards: impact on workflow, care quality, and patient safety.

    PubMed

    Egan, Marie

    2006-01-01

    There is a vast array of technical data that is continuously generated within the intensive care unit environment. In addition to physiological monitors, there is information being captured by the ventilator, intravenous infusion pumps, medication dispensing units, and even the patient's bed. The ability to retrieve and synchronize data is essential for both clinical documentation and real-time problem solving for individual patients and the intensive care unit population as a whole. Technical advances that permit the integration of all relevant data into a singular display or "dashboard" may improve staff efficiency, accelerate decisions, streamline workflow processes, and reduce oversights and errors in clinical practice. Critical care nurses must coordinate all aspects of care for one or more patients. Clinical data are constantly being retrieved, documented, analyzed, and communicated to others, all within the daily routine of nursing care. In addition, many bedside monitors and devices have alarms systems that must be evaluated throughout the workday, and actions taken on the basis of the patient's condition and other data. It is obvious that the complexity within such care processes presents many potential opportunities for overlooking important details. The capability to systematically and logically link physiological monitors and other selected data sets into a cohesive dashboard system holds tremendous promise for improving care quality, patient safety, and clinical outcomes in the intensive care unit.

  6. Guidance and Control Software Project Data - Volume 2: Development Documents

    NASA Technical Reports Server (NTRS)

    Hayhurst, Kelly J. (Editor)

    2008-01-01

    The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

  7. Models Extracted from Text for System-Software Safety Analyses

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.

    2010-01-01

    This presentation describes extraction and integration of requirements information and safety information in visualizations to support early review of completeness, correctness, and consistency of lengthy and diverse system safety analyses. Software tools have been developed and extended to perform the following tasks: 1) extract model parts and safety information from text in interface requirements documents, failure modes and effects analyses and hazard reports; 2) map and integrate the information to develop system architecture models and visualizations for safety analysts; and 3) provide model output to support virtual system integration testing. This presentation illustrates the methods and products with a rocket motor initiation case.

  8. Definition and means of maintaining the criticality detectors and alarms portion of the PFP safety envelope

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, W.F.

    The purpose of this document is to provide the definition and means of maintaining the Safety Envelope (SE) related to the Criticality Alarm System (CAS). This document provides amplification of the Limiting Condition for Operation (LCO) described in the Plutonium Finishing Plant (PFP) Operational Safety Requirements (OSR), WHC-SD-CP-OSR-010, Rev. 0, 1994, Section 3.1.2, Criticality Detectors and Alarms. This document, with its appendices, provides the following: (1) System functional requirements for determining system operability (Section 3); (2) A list of annotated system block diagrams which indicate the safety envelope boundaries (Appendix C); (3) A list of the Safety Class 1 andmore » 2 Safety Envelope (SC-1/2 SE) equipment for input into the Master Component Index (Appendix B); (4) Functional requirements for individual SC-1/2 SE components, including appropriate setpoints and process parameters (Section 6 and Appendix A); (5) A list of the operational, maintenance and surveillance procedures necessary to operate and maintain the SC-1/2 SE components as required by the LCO (Section 6 and Appendix A).« less

  9. Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals

    PubMed Central

    Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

    2014-01-01

    Background Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. Methods We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the ‘feedback’ phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. Results At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as ‘critical’; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included ‘normalisation’ of errors, study duration, ward leadership, capacity to engage and learning preferences. Discussion Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators’ effectiveness and how indicators and overall scorecard composition fit the intended audience. PMID:24029440

  10. 26 CFR 1.187-1 - Amortization of certain coal mine safety equipment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 3 2010-04-01 2010-04-01 false Amortization of certain coal mine safety... (continued) § 1.187-1 Amortization of certain coal mine safety equipment. (a) Allowance of deduction—(1) In... respect to the amortization of the adjusted basis (for determining gain) of any certified coal mine safety...

  11. Safety and environmental health handbook

    USGS Publications Warehouse

    ,

    1989-01-01

    This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

  12. Bibliography for computer security, integrity, and safety

    NASA Technical Reports Server (NTRS)

    Bown, Rodney L.

    1991-01-01

    A bibliography of computer security, integrity, and safety issues is given. The bibliography is divided into the following sections: recent national publications; books; journal, magazine articles, and miscellaneous reports; conferences, proceedings, and tutorials; and government documents and contractor reports.

  13. 49 CFR 385.333 - What happens at the end of the 18-month safety monitoring period?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.333 What happens at the end of the 18-month safety monitoring period? (a) If a safety audit has been performed within... the same basis as any other carrier. (d) If a safety audit or compliance review has not been performed...

  14. Perinatal Safety: From Concept to Nursing Practice

    PubMed Central

    Kennedy, Holly Powell

    2010-01-01

    Communication and teamwork problems are leading causes of documented preventable adverse outcomes in perinatal care. An essential component of perinatal safety is the organizational culture in which clinicians work. Clinicians’ individual and collective authority to question the plan of care and take action to change the direction of a clinical situation in the patient’s best interest can be viewed as their “agency for safety.” However, collective agency for safety and commitment to support nurses in their advocacy role is missing in many perinatal care settings. This paper draws from Organizational Accident Theory, High Reliability Theory, and Symbolic Interactionism to describe the nurse’s role in maintaining safety during labor and birth in acute care settings, and suggests actions for supporting the perinatal nurse at individual, group, and systems levels to achieve maximum safety in perinatal care. PMID:20147827

  15. Perinatal safety: from concept to nursing practice.

    PubMed

    Lyndon, Audrey; Kennedy, Holly Powell

    2010-01-01

    Communication and teamwork problems are leading causes of documented preventable adverse outcomes in perinatal care. An essential component of perinatal safety is the organizational culture in which clinicians work. Clinicians' individual and collective authority to question the plan of care and take action to change the direction of a clinical situation in the patient's best interest can be viewed as their "agency for safety." However, collective agency for safety and commitment to support nurses in their role of advocacy is missing in many perinatal care settings. This article draws from Organizational Accident Theory, High Reliability Theory, and Symbolic Interactionism to describe the nurse's role in maintaining safety during labor and birth in acute care settings and suggests actions for supporting the perinatal nurse at individual, group, and systems levels to achieve maximum safety in perinatal care.

  16. System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

    NASA Technical Reports Server (NTRS)

    Lawton, R. M.

    1996-01-01

    Demonstration of safety margins for critical points (circuits) has traditionally been required since it first became a part of systems-level Electromagnetic Compatibility (EMC) requirements of MIL-E-6051C. The goal of this document is to present cost-effective guidelines for ensuring adequate Electromagnetic Effects (EME) safety margins on spacecraft critical circuits. It is for the use of NASA and other government agencies and their contractors to prevent loss of life, loss of spacecraft, or unacceptable degradation. This document provides practical definition and treatment guidance to contain costs within affordable limits.

  17. Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

    NASA Technical Reports Server (NTRS)

    Torres-Pomales, Wilfredo

    2015-01-01

    This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

  18. Motivation for documentation.

    PubMed

    Graham, Denise H

    2004-11-01

    The quality improvement plan relies on controlling quality of care through improving the process or system as a whole. Your ongoing data collection is paramount to the process of system-wide improvement and performance, enhancement of financial performance, operational performance and overall service performance and satisfaction. The threat of litigation and having to defend yourself from a claim of wrongdoing still looms every time your wheels turn. Your runsheet must serve and protect you. Look at the NFPA 1710 standard, which was enacted to serve and protect firefighters. This standard was enacted with their personal safety and well-being as the principle behind staffing requirements. At what stage of draft do you suppose the NFPA 1710 standard would be today if the relative data were collected sporadically or were not tracked for each service-related death? It may have taken many more service-related deaths to effect change for a system-wide improvement in operational performance. Every call merits documentation and data collection. Your data are catalysts for change.

  19. Transit vehicle-to-infrastructure (V2I) applications : near term research and development transit bus stop pedestrian safety application : operational concept.

    DOT National Transportation Integrated Search

    2014-12-01

    This document serves as an Operational Concept for the Transit Bus Stop Pedestrian Safety application. The purpose of this document is to communicate user needs and desired capabilities for and expectations of the Transit Bus Stop Pedestrian Safety a...

  20. Transit safety retrofit package development : final report.

    DOT National Transportation Integrated Search

    2014-07-01

    This report provides a summary of the Transit Safety Retrofit Package (TRP) Development project and its results. The report documents results of each project phase, and provides recommended next steps as well as a vision for a next generation TRP. Th...

  1. Ensuring the safety of deaf children in residential schools.

    PubMed

    Brookhouser, P E

    1987-10-01

    In 1983, 75,000 to 90,000 children and youth in the United States had hearing impairments severe enough to warrant some sort of special education, and 28% of that total (i.e., 21,000 to 25,000) were in residential schools. Deaf youngsters in institutional settings are at risk for maltreatment by surrogate caretakers--foster parents or institutional child care workers. Attempts to report the abuse may produce denials by institutional administrators who do not want to believe that children under their care have been abused or who fear serious personal and/or institutional consequences should the abuse report become public. Clearly, steps must be taken to ensure the safety of deaf children being educated in residential institutions. Health providers must assume a special responsibility for detecting and preventing abuse/neglect of handicapped children for whom they are providing medical care on a continuing basis. This article will explore relevant aspects of the present system for delivery of health services to deaf children, as well as present specific strategies for detection, documentation, and prevention of maltreatment of these particularly vulnerable children.

  2. Office of Safety and Mission Assurance Review Report

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This document summarizes questions and concerns raised during the 1999 IV&V Facility's Annual Review Presentation to the Office of Safety and Mission Assurance (OSMA). Recommendations are provided for issues and action items identified.

  3. Health and Safety Research Division progress report, October 1, 1988--March 31, 1990

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1990-09-01

    The Health and Safety Research Division (HASRD) of the Oak Ridge National Laboratory (ORNL) continues to maintain an outstanding program of basic and applied research displaying a high level of creativity and achievement as documented by awards, publications, professional service, and successful completion of variety of projects. Our focus is on human health and the scientific basis for measurement and assessment of health-related impacts of energy technologies. It is our custom to publish a division progress report every 18 months that summarizes our programmatic progress and other measures of achievement over the reporting period. Since it is not feasible tomore » summarize in detail all of our work over the period covered by this report (October 1, 1988, to March 30, 1990), we intend this document to point the way to the expensive open literature that documents our findings. During the reporting period the Division continued to maintain strong programs in its traditional areas of R D, but also achieved noteworthy progress in other areas. Much of the Division's work on site characterization, development of new field instruments, compilation of data bases, and methodology development fits into this initiative. Other new work in tunneling microscopy in support of DOE's Human Genome Program and the comprehensive R D work related to surface-enhanced Raman spectroscopy have attained new and exciting results. These examples of our progress and numerous other activities are highlighted in this report.« less

  4. IDC Re-Engineering Phase 2 System Requirements Document V1.3.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harris, James M.; Burns, John F.; Satpathi, Meara Allena

    2015-12-01

    This System Requirements Document (SRD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The IDC applies, on a routine basis, automatic processing methods and interactive analysis to raw International Monitoring System (IMS) data in order to produce, archive, and distribute standard IDC products on behalf of all States Parties. The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide datamore » but includes requirements for the dissemination of radionuclide data and products.« less

  5. IDC Re-Engineering Phase 2 System Requirements Document Version 1.4

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harris, James M.; Burns, John F.; Satpathi, Meara Allena

    This System Requirements Document (SRD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The IDC applies, on a routine basis, automatic processing methods and interactive analysis to raw International Monitoring System (IMS) data in order to produce, archive, and distribute standard IDC products on behalf of all States Parties. The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide data,more » but includes requirements for the dissemination of radionuclide data and products.« less

  6. Development document for proposed effluent-limitations guidelines and standards for shipbuilding and repair. Point-source category

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1979-12-01

    The document contains a discussion of the technical rationale for effluent limitations guidelines for the Shipbuilding and Repair Point Source Category, and the control and treatment technologies which form the basis for these guidelines.

  7. Criticality Safety Evaluation for Small Sample Preparation and Non-Destructive Assay (NDA) Operations in Wing 7 Basement of the CMR Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kunkle, Paige Elizabeth; Zhang, Ning

    Nuclear Criticality Safety (NCS) has reviewed the fissionable material small sample preparation and NDA operations in Wing 7 Basement of the CMR Facility. This is a Level-1 evaluation conducted in accordance with NCS-AP-004 [Reference 1], formerly NCS-GUIDE-01, and the guidance set forth on use of the Standard Criticality Safety Requirements (SCSRs) [Reference 2]. As stated in Reference 2, the criticality safety evaluation consists of both the SCSR CSED and the SCSR Application CSED. The SCSR CSED is a Level-3 CSED [Reference 3]. This Level-1 CSED is the SCSR Application CSED. This SCSR Application (Level-1) evaluation does not derive controls, itmore » simply applies controls derived from the SCSR CSED (Level-3) for the application of operations conducted here. The controls derived in the SCSR CSED (Level-3) were evaluated via the process described in Section 6.6.5 of SD-130 (also reproduced in Section 4.3.5 of NCS-AP-004 [Reference 1]) and were determined to not meet the requirements for consideration of elevation into the safety basis documentation for CMR. According to the guidance set forth on use of the SCSRs [Reference 2], the SCSR CSED (Level-3) is also applicable to the CMR Facility because the process and the normal and credible abnormal conditions in question are bounded by those that are described in the SCSR CSED. The controls derived in the SCSR CSED include allowances for solid materials and solution operations. Based on the operations conducted at this location, there are less-than-accountable (LTA) amounts of 233U. Based on the evaluation documented herein, the normal and credible abnormal conditions that might arise during the execution of this process will remain subcritical with the following recommended controls.« less

  8. Transit vehicle-to-infrastructure (V2I) applications : near term research and development. Transit bus-pedestrian/cyclist crossing safety application : operational concept.

    DOT National Transportation Integrated Search

    2013-11-01

    This document serves as an Operational Concept for the Transit Bus-Pedestrian/Cyclist Crossing Safety application. The purpose of this document is to provide an operational description of how the Transit Bus-Pedestrian/Cyclist Crossing Safety W...

  9. Methods and means used in programming intelligent searches of technical documents

    NASA Technical Reports Server (NTRS)

    Gross, David L.

    1993-01-01

    In order to meet the data research requirements of the Safety, Reliability & Quality Assurance activities at Kennedy Space Center (KSC), a new computer search method for technical data documents was developed. By their very nature, technical documents are partially encrypted because of the author's use of acronyms, abbreviations, and shortcut notations. This problem of computerized searching is compounded at KSC by the volume of documentation that is produced during normal Space Shuttle operations. The Centralized Document Database (CDD) is designed to solve this problem. It provides a common interface to an unlimited number of files of various sizes, with the capability to perform any diversified types and levels of data searches. The heart of the CDD is the nature and capability of its search algorithms. The most complex form of search that the program uses is with the use of a domain-specific database of acronyms, abbreviations, synonyms, and word frequency tables. This database, along with basic sentence parsing, is used to convert a request for information into a relational network. This network is used as a filter on the original document file to determine the most likely locations for the data requested. This type of search will locate information that traditional techniques, (i.e., Boolean structured key-word searching), would not find.

  10. 78 FR 9902 - DOE Response to Recommendation 2012-2 of the Defense Nuclear Facilities Safety Board, Hanford...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-12

    ... DEPARTMENT OF ENERGY DOE Response to Recommendation 2012-2 of the Defense Nuclear Facilities Safety Board, Hanford Tank Farms Flammable Gas Safety Strategy; Correction AGENCY: Department of Energy... Facilities Safety Board, Hanford Tank Farms Flammable Gas Safety Strategy. This document corrects an error in...

  11. Traffic Safety Messages on Dynamic Message Signs (DMS)

    DOT National Transportation Integrated Search

    2018-05-01

    This technical assistance report investigated the existing state of practice across the nation for placing safety campaign messages on dynamic message signs (DMS) and reviewed relevant studies that documented any evidence of effectiveness in influenc...

  12. Legislative history of recent primary safety belt laws

    DOT National Transportation Integrated Search

    1999-01-01

    This document summarizes the strategies that supported or opposed new legislative provisions and the barriers encountered in modifying safety belt laws prior to December 1997. This study developed legislative analyses of six jurisdictions that upgrad...

  13. Indicators of School Crime and Safety: 2006. NCES 2007-003

    ERIC Educational Resources Information Center

    Dinkes, Rachel; Cataldi, Emily Forrest; Kena, Grace; Baum, Katrina

    2006-01-01

    This report provides the most recent national indicators on school crime and safety. Some of these indicators document that student safety has improved. For example, the victimization rate of students ages 12-18 at school declined from 73 victimizations per 1,000 students in 2003 to 55 per 1,000 students victimizations in 2004. However, other…

  14. Nuclear power and probabilistic safety assessment (PSA): past through future applications

    NASA Astrophysics Data System (ADS)

    Stamatelatos, M. G.; Moieni, P.; Everline, C. J.

    1995-03-01

    Nuclear power reactor safety in the United States is about to enter a new era -- an era of risk- based management and risk-based regulation. First, there was the age of `prescribed safety assessment,' during which a series of design-basis accidents in eight categories of severity, or classes, were postulated and analyzed. Toward the end of that era, it was recognized that `Class 9,' or `beyond design basis,' accidents would need special attention because of the potentially severe health and financial consequences of these accidents. The accident at Three Mile Island showed that sequences of low-consequence, high-frequency events and human errors can be much more risk dominant than the Class 9 accidents. A different form of safety assessment, PSA, emerged and began to gain ground against the deterministic safety establishment. Eventually, this led to the current regulatory requirements for individual plant examinations (IPEs). The IPEs can serve as a basis for risk-based regulation and management, a concept that may ultimately transform the U.S. regulatory process from its traditional deterministic foundations to a process predicated upon PSA. Beyond the possibility of a regulatory environment predicated upon PSA lies the possibility of using PSA as the foundation for managing daily nuclear power plant operations.

  15. An integrated information retrieval and document management system

    NASA Technical Reports Server (NTRS)

    Coles, L. Stephen; Alvarez, J. Fernando; Chen, James; Chen, William; Cheung, Lai-Mei; Clancy, Susan; Wong, Alexis

    1993-01-01

    This paper describes the requirements and prototype development for an intelligent document management and information retrieval system that will be capable of handling millions of pages of text or other data. Technologies for scanning, Optical Character Recognition (OCR), magneto-optical storage, and multiplatform retrieval using a Standard Query Language (SQL) will be discussed. The semantic ambiguity inherent in the English language is somewhat compensated-for through the use of coefficients or weighting factors for partial synonyms. Such coefficients are used both for defining structured query trees for routine queries and for establishing long-term interest profiles that can be used on a regular basis to alert individual users to the presence of relevant documents that may have just arrived from an external source, such as a news wire service. Although this attempt at evidential reasoning is limited in comparison with the latest developments in AI Expert Systems technology, it has the advantage of being commercially available.

  16. Improving care transitions through meaningful use stage 2: continuity of care document.

    PubMed

    Murphy, Lyn Stankiewicz; Wilson, Marisa L; Newhouse, Robin P

    2013-02-01

    In this department, Drs Murphy, Wilson, and Newhouse highlight hot topics in nursing outcomes, research, and evidence-based practice relevant to the nurse administrator. The goal is to discuss the practical implications for nurse leaders in diverse healthcare settings. Content includes evidence-based projects and decision making, locating measurement tools for quality improvement and safety projects, using outcome measures to evaluate quality, practice implications of administrative research, and exemplars of projects that demon strate innovative approaches to organizational problems. In this article, the authors describe the elements of continuity of care documentation, how sharing information can improve the quality and safety of care transitions and the implications for nurse executives.

  17. August 2015 Proposed Total Maximum Daily Load Document and Appendices for Vermont Segments of Lake Champlain

    EPA Pesticide Factsheets

    These documents provide allocations of phosphorus loads to Lake Champlain to meet water quality criteria, describe basis for allocation for future growth, & describe how implementation measures were simulated to determine that allocations can be achieved

  18. A safety management system for an offshore Azerbaijan Caspian Sea Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brasic, M.F.; Barber, S.W.; Hill, A.S.

    1996-11-01

    This presentation will describe the Safety Management System that Azerbaijan International Operating Company (AIOC) has structured to assure that Company activities are performed in a manner that protects the public, the environment, contractors and AIOC employees. The Azerbaijan International Oil Company is a consortium of oil companies that includes Socar, the state oil company of Azerbaijan, a number of major westem oil companies, and companies from Russia, Turkey and Saudi Arabia. The Consortium was formed to develop and produce a group of large oil fields in the Caspian Sea. The Management of AIOC, in starting a new operation in Azerbaijan,more » recognized the need for a formal HSE management system to ensure that their HSE objectives for AIOC activities were met. As a consortium of different partners working together in a unique operation, no individual partner company HSE Management system was appropriate. Accordingly AIOC has utilized the E & P Forum {open_quotes}Guidelines for the Development and Application of Health Safety and Environmental Management Systems{close_quotes} as the framework document for the development of the new AIOC system. Consistent with this guideline, AIOC has developed 19 specific HSE Management System Expectations for implementing its HSE policy and objectives. The objective is to establish and continue to maintain operational integrity in all AIOC activities and site operations. An important feature is the use of structured Safety Cases for the design engineering activity. The basis for the Safety Cases is API RP 75 and 14 J for offshore facilities and API RP 750 for onshore facilities both complimented by {open_quotes}Best International Oilfield Practice{close_quotes}. When viewed overall, this approach provides a fully integrated system of HSE management from design into operation.« less

  19. 2014 safety belt usage survey in Kentucky.

    DOT National Transportation Integrated Search

    2014-08-01

    The objective of the survey summarized in this report was to establish a statewide safety belt usage rate in Kentucky for 2014. This rate can be compared to those determined from previous surveys. The 2014 statewide survey continues to document the i...

  20. 40 CFR 68.65 - Process safety information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.65 Process safety... data; (4) Reactivity data: (5) Corrosivity data; (6) Thermal and chemical stability data; and (7... operator shall document that equipment complies with recognized and generally accepted good engineering...

  1. Surrogate Safety Assessment Model (SSAM)--software user manual

    DOT National Transportation Integrated Search

    2008-05-01

    This document presents guidelines for the installation and use of the Surrogate Safety Assessment Model (SSAM) software. For more information regarding the SSAM application, including discussion of theoretical background and the results of a series o...

  2. Improving tractor safety warnings: readability is missing.

    PubMed

    Tebeaux, E

    2010-07-01

    Research on tractor safety has not focused on user manuals. This study focuses on tractor operator manuals, specifically safety warnings, selected from the files of the Tractor Test facility at University of Nebraska-Lincoln. Analysis of many common warnings, based on readability and legibility research, shows that many warnings contain excessive information, confusing visuals and safety icons, poor document design, and illegible typefaces. The result is unreadable warnings that do not communicate quickly and correctly, and discourage readers rather than clarify critical information. Many tractor operator warnings are cluttered, "over-written," and contain information needed to protect the manufacturer rather than to inform operators. What is needed is a careful analysis and revision of many safety warnings with the goal of encouraging operators to read the warnings and follow their message.

  3. Version control system of CAD documents and PLC projects

    NASA Astrophysics Data System (ADS)

    Khudyakov, P. Yu; Kisel’nikov, A. Yu; Startcev, I. M.; Kovalev, A. A.

    2018-05-01

    The paper presents the process of developing a version control system for CAD documents and PLC projects. The software was tested and the optimal composition of the modules was selected. The introduction of the system has made it possible to increase the safety and stability of the process control systems, as well as to reduce the number of conflicts for versions of CAD files. The number of incidents at the enterprise related to the use of incorrect versions of PLC projects is reduced to 0.

  4. A Safety Index and Method for Flightdeck Evaluation

    NASA Technical Reports Server (NTRS)

    Latorella, Kara A.

    2000-01-01

    If our goal is to improve safety through machine, interface, and training design, then we must define a metric of flightdeck safety that is usable in the design process. Current measures associated with our notions of "good" pilot performance and ultimate safety of flightdeck performance fail to provide an adequate index of safe flightdeck performance for design evaluation purposes. The goal of this research effort is to devise a safety index and method that allows us to evaluate flightdeck performance holistically and in a naturalistic experiment. This paper uses Reason's model of accident causation (1990) as a basis for measuring safety, and proposes a relational database system and method for 1) defining a safety index of flightdeck performance, and 2) evaluating the "safety" afforded by flightdeck performance for the purpose of design iteration. Methodological considerations, limitations, and benefits are discussed as well as extensions to this work.

  5. 76 FR 22812 - Safety Zone; Sea World Fireworks; Mission Bay, San Diego, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-25

    ...-AA00 Safety Zone; Sea World Fireworks; Mission Bay, San Diego, CA AGENCY: Coast Guard, DHS. ACTION... navigable waters of Mission Bay in support of the Sea World Fireworks. This safety zone is necessary to... impracticable, because immediate action is needed to ensure the public's safety. Basis and Purpose Sea World is...

  6. Evaluating the performance and safety effectiveness of roundabouts.

    DOT National Transportation Integrated Search

    2011-12-01

    This report documents the evaluation of the performance and safety effectiveness of roundabouts within the State of Michigan. The study began with the identification of roundabouts within Michigan. This was followed by collecting data on the geometri...

  7. Document cards: a top trumps visualization for documents.

    PubMed

    Strobelt, Hendrik; Oelke, Daniela; Rohrdantz, Christian; Stoffel, Andreas; Keim, Daniel A; Deussen, Oliver

    2009-01-01

    Finding suitable, less space consuming views for a document's main content is crucial to provide convenient access to large document collections on display devices of different size. We present a novel compact visualization which represents the document's key semantic as a mixture of images and important key terms, similar to cards in a top trumps game. The key terms are extracted using an advanced text mining approach based on a fully automatic document structure extraction. The images and their captions are extracted using a graphical heuristic and the captions are used for a semi-semantic image weighting. Furthermore, we use the image color histogram for classification and show at least one representative from each non-empty image class. The approach is demonstrated for the IEEE InfoVis publications of a complete year. The method can easily be applied to other publication collections and sets of documents which contain images.

  8. Patient safety principles in family medicine residency accreditation standards and curriculum objectives

    PubMed Central

    Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

    2016-01-01

    Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

  9. [SUBSTANTIATION OF DOSE LIMITS FOR A NEW NORMATIVE DOCUMENT ON RADIATION SAFETY OF LONG-DURATION SPACE MISSIONS AT ORBIT ALTITUDES OF UP TO 500 KM].

    PubMed

    Ushakov, I B; Grigoriev, Yu G; Shafirkin, A V; Shurshakov, V A

    2016-01-01

    Review of the data of experimental radiobiology and epidemiological follow-up of large groups of people subjected to radiation exposures on Earth has been undertaken to substantiate dose limits for critical organs of cosmonauts in order to ensure good performance and vitality while on long-duration orbital missions. The career dose limits for cosmonauts and astronauts established earlier in the USSR and USA amounted to nothing more but banning the risk of cancer death increase to 3%. To apply more rigorous criteria of delayed radiation risks, the Russian limits for cosmonauts were revised to substantiate a 4-fold reduction of the average tissue equivalent dose maximum to 1 Sv. The total of cancer and non-cancer radiation risks over lifetime and probable reduction of mean life expectancy (MLE) were calculated using the model of radiation-induced mortality for mammals and taken as the main damage to health. The established dose limit is equal to the career dose for nuclear industry personnel set forth by Russian standard document NRB 99/2009. For better agreement of admissible threshold doses to critical human organs (bone marrow, lens and skin) in the revised radiation limits for long-duration space missions and radiation safety limits on Earth, reduction of dose limits for the critical organs were substantiated additionally; these limits comply with those for planned over-exposure on Earth in document NRB 99/2009.

  10. Documentation forms for monitoring occupational surveillance of healthcare workers who handle cytotoxic drugs.

    PubMed

    Parillo, V L

    1994-01-01

    To develop a procedure for medical surveillance of healthcare workers who handle cytotoxic drugs. Literature review and guidelines published by the Occupational Safety and Health Administration and the National Institute for Occupational Safety and Health. INFORMATION SELECTION: Studies of possible exposure screening tests, congenital defects in offspring, and case studies. Some degree of risk exists in handling cytotoxic drugs, but no reliable screening test for cytotoxic drug exposure has been developed. Reproductive hazards are possible when protective equipment is not used. Areas to be addressed when devising surveillance procedures include who to cover, what baseline data to gather, what periodic monitoring will be necessary (and at what interval it will be conducted), how to handle exposure incidents, and what documentation system will be used. A procedure using a baseline risk factor form and a yearly monitoring questionnaire was devised and implemented. Forms contain documentation of worker teaching. Most often, nurses are the healthcare workers who handle cytotoxic drugs. A consistent approach to monitoring healthcare workers is facilitated by using a defined procedure and standardized forms.

  11. Medication communication through documentation in medical wards: knowledge and power relations.

    PubMed

    Liu, Wei; Manias, Elizabeth; Gerdtz, Marie

    2014-09-01

    Health professionals communicate with each other about medication information using different forms of documentation. This article explores knowledge and power relations surrounding medication information exchanged through documentation among nurses, doctors and pharmacists. Ethnographic fieldwork was conducted in 2010 in two medical wards of a metropolitan hospital in Australia. Data collection methods included participant observations, field interviews, video-recordings, document retrieval and video reflexive focus groups. A critical discourse analytic framework was used to guide data analysis. The written medication chart was the main means of communicating medication decisions from doctors to nurses as compared to verbal communication. Nurses positioned themselves as auditors of the medication chart and scrutinised medical prescribing to maintain the discourse of patient safety. Pharmacists utilised the discourse of scientific judgement to guide their decision-making on the necessity of verbal communication with nurses and doctors. Targeted interdisciplinary meetings involving nurses, doctors and pharmacists should be organised in ward settings to discuss the importance of having documented medication information conveyed verbally across different disciplines. Health professionals should be encouraged to proactively seek out each other to relay changes in medication regimens and treatment goals. © 2013 John Wiley & Sons Ltd.

  12. Corporate Functional Management Evaluation of the LLNL Radiation Safety Organization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sygitowicz, L S

    2008-03-20

    A Corporate Assess, Improve, and Modernize review was conducted at Lawrence Livermore National Laboratory (LLNL) to evaluate the LLNL Radiation Safety Program and recommend actions to address the conditions identified in the Internal Assessment conducted July 23-25, 2007. This review confirms the findings of the Internal Assessment of the Institutional Radiation Safety Program (RSP) including the noted deficiencies and vulnerabilities to be valid. The actions recommended are a result of interviews with about 35 individuals representing senior management through the technician level. The deficiencies identified in the LLNL Internal Assessment of the Institutional Radiation Safety Program were discussed with Radiationmore » Safety personnel team leads, customers of Radiation Safety Program, DOE Livermore site office, and senior ES&H management. There are significant issues with the RSP. LLNL RSP is not an integrated, cohesive, consistently implemented program with a single authority that has the clear roll and responsibility and authority to assure radiological operations at LLNL are conducted in a safe and compliant manner. There is no institutional commitment to address the deficiencies that are identified in the internal assessment. Some of these deficiencies have been previously identified and corrective actions have not been taken or are ineffective in addressing the issues. Serious funding and staffing issues have prevented addressing previously identified issues in the Radiation Calibration Laboratory, Internal Dosimetry, Bioassay Laboratory, and the Whole Body Counter. There is a lack of technical basis documentation for the Radiation Calibration Laboratory and an inadequate QA plan that does not specify standards of work. The Radiation Safety Program lack rigor and consistency across all supported programs. The implementation of DOE Standard 1098-99 Radiological Control can be used as a tool to establish this consistency across LLNL. The establishment of a

  13. Quantifying Safety Performance of Driveways on State Highways

    DOT National Transportation Integrated Search

    2012-08-01

    This report documents a research effort to quantify the safety performance of driveways in the State of Oregon. In : particular, this research effort focuses on driveways located adjacent to principal arterial state highways with urban or : rural des...

  14. 76 FR 23339 - Aerospace Safety Advisory Panel; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-043)] Aerospace Safety Advisory Panel; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of meeting..., 2011. SUMMARY: The National Aeronautics and Space Administration published a document in the Federal...

  15. Documentation of 50% water conservation in a single process at a beef abattoir. Meat Science

    USDA-ARS?s Scientific Manuscript database

    Beef slaughter is water intensive due to stringent food safety requirements. We conducted a study at a commercial beef processor to demonstrate water conservation by modifying the mechanical head wash. We documented the initial nozzle configuration (112 nozzles), water pressure (275 kPa), and flowra...

  16. Auto Mechanics I. Learning Activity Packets (LAPs). Section A--Orientation and Safety.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains seven learning activity packets (LAPs) that outline the study activities for the orientation and safety instructional area for an Auto Mechanics I course. The seven LAPs cover the following topics: orientation, safety, hand tools, arc welding, oxyacetylene cutting, oxyacetylene fusion welding, and oxyacetylene braze welding.…

  17. Estimating the CCSD basis-set limit energy from small basis sets: basis-set extrapolations vs additivity schemes

    NASA Astrophysics Data System (ADS)

    Spackman, Peter R.; Karton, Amir

    2015-05-01

    Coupled cluster calculations with all single and double excitations (CCSD) converge exceedingly slowly with the size of the one-particle basis set. We assess the performance of a number of approaches for obtaining CCSD correlation energies close to the complete basis-set limit in conjunction with relatively small DZ and TZ basis sets. These include global and system-dependent extrapolations based on the A + B/Lα two-point extrapolation formula, and the well-known additivity approach that uses an MP2-based basis-set-correction term. We show that the basis set convergence rate can change dramatically between different systems(e.g.it is slower for molecules with polar bonds and/or second-row elements). The system-dependent basis-set extrapolation scheme, in which unique basis-set extrapolation exponents for each system are obtained from lower-cost MP2 calculations, significantly accelerates the basis-set convergence relative to the global extrapolations. Nevertheless, we find that the simple MP2-based basis-set additivity scheme outperforms the extrapolation approaches. For example, the following root-mean-squared deviations are obtained for the 140 basis-set limit CCSD atomization energies in the W4-11 database: 9.1 (global extrapolation), 3.7 (system-dependent extrapolation), and 2.4 (additivity scheme) kJ mol-1. The CCSD energy in these approximations is obtained from basis sets of up to TZ quality and the latter two approaches require additional MP2 calculations with basis sets of up to QZ quality. We also assess the performance of the basis-set extrapolations and additivity schemes for a set of 20 basis-set limit CCSD atomization energies of larger molecules including amino acids, DNA/RNA bases, aromatic compounds, and platonic hydrocarbon cages. We obtain the following RMSDs for the above methods: 10.2 (global extrapolation), 5.7 (system-dependent extrapolation), and 2.9 (additivity scheme) kJ mol-1.

  18. 3 CFR 9017 - Proclamation 9017 of September 13, 2013. National Farm Safety and Health Week, 2013

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Farm Safety and Health Week, 2013 9017 Proclamation 9017 Presidential Documents Proclamations Proclamation 9017 of September 13, 2013 Proc. 9017 National Farm Safety and Health Week, 2013By the President.... During National Farm Safety and Health Week, we celebrate our agricultural producers' values, experiences...

  19. Collegiate Aviation Research and Education Solutions to Critical Safety Issues. UNO Aviation Monograph Series. UNOAI Report.

    ERIC Educational Resources Information Center

    Bowen, Brent, Ed.

    This document contains four papers concerning collegiate aviation research and education solutions to critical safety issues. "Panel Proposal Titled Collegiate Aviation Research and Education Solutions to Critical Safety Issues for the Tim Forte Collegiate Aviation Safety Symposium" (Brent Bowen) presents proposals for panels on the…

  20. The future of hazardous chemical safety in China: Opportunities, problems, challenges and tasks.

    PubMed

    Wang, Bing; Wu, Chao; Reniers, Genserik; Huang, Lang; Kang, Liangguo; Zhang, Laobing

    2018-06-20

    China is a major country producing and using hazardous chemicals. Unfortunately, the hazardous chemical industry is still one of the most high-risk industries in China. In recent years, especially after two devastating hazardous chemical accidents, namely "Qingdao 11.2 Crude Oil Leaking and Explosion Accident" and "Tianjin Port 8.12 Fire and Explosion Accident" which occurred in 2013 and 2015 respectively, China has attached great importance to hazardous chemical safety. The period between 2016 and 2017 is a crucial period for the future direction of hazardous chemical safety in China because China released a series of important government documents (such as 'Thirteenth Five-Year (2016-2020) Plan for Hazardous Chemical Safety' and 'Comprehensive Plan for Hazardous Chemical Safety Management (December 2016-November 2019)') to promote hazardous chemical safety in the future. What is the future development of China's hazardous chemical safety? To answer this question, this paper attempts to briefly analyze and introduce the opportunities, problems, challenges and tasks of the future of safety with hazardous chemical industrial activities in China, according to the current situation of hazardous chemical safety in China and using the latest government documents and studies. Obviously, this study can provide useful evidence and suggestions for the future of safety management in the hazardous chemical industry both within China and in other countries. Copyright © 2018 Elsevier B.V. All rights reserved.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.